WorldWideScience

Sample records for impact limiter based

  1. A simple sizing optimization technique for an impact limiter based on dynamic material properties

    International Nuclear Information System (INIS)

    Choi, Woo-Seok; Seo, Ki-Seog

    2010-01-01

    According to IAEA regulations, a transportation package for radioactive material should perform its intended function of containing the radioactive contents after a drop test, which is one of the hypothetical accident conditions. Impact limiters attached to a transport cask absorb most of the impact energy. So, it is important to determine the shape, size and material of impact limiters properly. The material data needed in this determination is a dynamic one. In this study, several materials considered as those of impact limiters were tested by drop weight equipment to acquire the dynamic material characteristics data. The impact absorbing volume of the impact limiter was derived mathematically for each drop condition. A size optimization of the impact limiter was conducted. The derived impact absorbing volumes were applied as constraints. These volumes should be less than the critical volumes generated based on the dynamic material characteristics. The derived procedure to decide the shape of the impact limiter can be useful at the preliminary design stage when the transportation package's outline is roughly determined and applied as an input value.

  2. Impact-limiting materials characterization

    International Nuclear Information System (INIS)

    Glass, R.E.; Duffey, T.A.; McConnell, P.

    1993-01-01

    Three types of impact-limiting materials have been characterized which have applications in packages for the transport of radioactive materials. These materials are aluminum honeycombs, polyurethane foams, and aluminum foams. The results of the materials characterization have indicated strengths and weaknesses for each type of material. The polyurethane foams provide good impact limiting ability and excellent thermal insulation. However, they burn when subjected to the regulatory thermal event in the presence of air. The aluminum honeycombs provide excellent impact resistance in specific impact orientations. However, they provide relatively poor resistance to thermal assault. Finally, the aluminum foams exhibit relatively poor impact energy absorption capacities, significant variability in energy absorption, and limited thermal insulation. The development of the figures of merit examined the response of the materials to the impact event with the intent of maximizing the energy absorption of the materials with respect to either the volume or mass of the materials. Three figures of merit will be presented for the structural response. The figure of merit for the thermal event is based on minimizing the heat flux to the containment boundary. The paper presents a discussion of the test methods, a summary of the data and the figures of merit for each material. (J.P.N.)

  3. FUEL CASK IMPACT LIMITER VULNERABILITIES

    International Nuclear Information System (INIS)

    Leduc, D.; England, J.; Rothermel, R.

    2009-01-01

    Cylindrical fuel casks often have impact limiters surrounding just the ends of the cask shaft in a typical 'dumbbell' arrangement. The primary purpose of these impact limiters is to absorb energy to reduce loads on the cask structure during impacts associated with a severe accident. Impact limiters are also credited in many packages with protecting closure seals and maintaining lower peak temperatures during fire events. For this credit to be taken in safety analyses, the impact limiter attachment system must be shown to retain the impact limiter following Normal Conditions of Transport (NCT) and Hypothetical Accident Conditions (HAC) impacts. Large casks are often certified by analysis only because of the costs associated with testing. Therefore, some cask impact limiter attachment systems have not been tested in real impacts. A recent structural analysis of the T-3 Spent Fuel Containment Cask found problems with the design of the impact limiter attachment system. Assumptions in the original Safety Analysis for Packaging (SARP) concerning the loading in the attachment bolts were found to be inaccurate in certain drop orientations. This paper documents the lessons learned and their applicability to impact limiter attachment system designs

  4. Dynamic tests on metallic impact limiters

    International Nuclear Information System (INIS)

    Sagartz, M.J.

    1978-01-01

    Three different types of metallic impact limiters were tested; plain fins, laterally stiffened fins and tubes whose axes were aligned with the direction of impact. All specimens were made of 304 stainless steel and were annealed before testing. A heavy steel drop table of variable mass and moving at about 13.4 m/s (44 ft/s) was used to impact the specimens which were mounted on a stationary base. Impact velocity, drop table acceleration vs. time and force vs. time were measured on each test and were used to calculate the energy absorbed by the impact limiters. Results showed that the peak stress that a plain fin can transmit to the cask body can be several times the static yield stress of the fin. Also as buckling proceeds the load in a plain fin drops significantly and the rate at which it absorbs energy falls off dramatically, making the fin a rather inefficient energy absorber overall. The laterally stiffened fin and the cylinders did not exhibit this rapid decrease in load-carrying capacity with deformation and hence were able to absorb relatively more energy per unit volume of material

  5. Impact limiter retention using a tape joint

    International Nuclear Information System (INIS)

    Gonzales, A.; Eakes, R.G.

    1986-01-01

    The Beneficial Uses Shipping System (BUSS) Cask employs polyurethane foam impact limiters that fit onto the ends of the cask. A foam impact limiter takes energy out of a system during a hypothetical accident condition by allowing foam crush and large deformations to occur. This, in turn, precludes high stresses or deformations from occurring to the cask. Because of the need to transmit significant amounts of heat to the environment, the BUSS cask impact limiters were designed to shield a minimum amount of the cask surface area. With this design impact limiter retention after the initial impact resulting from the 9 meter regulatory drops becomes a concern. Retention is essential to ensure the cask does not experience higher stresses during any secondary or rebound effects without impact limiters than it does during the 9 meter regulatory drop with impact limiters in place

  6. Impact limiter design for a lightweight tritium hydride vessel transport container

    International Nuclear Information System (INIS)

    Harding, D.C.; Longcope, D.B.; Neilsen, M.K.

    1995-01-01

    Sandia National Laboratories (SNL) has designed an impact-limiting system for a small, lightweight radioactive material shipping container. The Westinghouse Savannah River Company (WSRC) is developing this Type B package for the shipment of tritium, replacing the outdated LP-50 shipping container. Regulatory accident resistance requirements for Type B packages, including this new tritium package, are specified in 10 CFR 71 (NRC 1983). The regulatory requirements include a 9-meter free drop onto an unyielding target, a 1-meter drop onto a mild steel punch, and a 30-minute 800 degrees C fire test. Impact limiters are used to protect the package in the free-drop accident condition in any impact orientation without hindering the package's resistance to the thermal accident condition. The overall design of the new package is based on a modular concept using separate thermal shielding and impact mitigating components in an attempt to simplify the design, analysis, test, and certification process. Performance requirements for the tritium package's limiting system are based on preliminary estimates provided by WSRC. The current tritium hydride vessel (THV) to be transported has relatively delicate valving assemblies and should not experience acceleration levels greater than approximately 200 g's. A thermal overpack and outer stainless steel shell, to be designed by WSRC, will form the inner boundary of the impact-limiting system (see Figure 1). The mass of the package, including cargo, inner container, thermal overpack, and outer stainless steel shell (not including impact limiters) should be approximately 68 kg. Consistent with the modular design philosophy, the combined thermal overpack and containment system should be considered essentially rigid, with the impact limiters incurring all deformation

  7. Optimization of an impact limiter for radioactive waste packaging

    International Nuclear Information System (INIS)

    Mourao, Rogerio Pimenta; Mattar Neto, Miguel

    1999-01-01

    A certain class of packages for the transportation of radioactive wastes - type B packages in the transport jargon - is supposed to resist to a series of postulated tests, the most severe for the majority of the packages being the 9 m height drop test. To improve the performance of the packages under this test, impact limiters are added to them, normally as a removable overpack, with the primary goal of reducing the deceleration loads transmitted to the packages and their contents. The first impact limiter concept, developed during the '70s, used a shell-type impact limiter attached to both ends of the package. Later on, wood was tested as impact limiter filling, which improved the package's mechanical performance, but not its thermal resistance. The popularization of the polymeric materials and their growing use in engineer applications have led to the use of these materials in impact limiters, with the extra advantage of the polymers good thermal properties. This paper proposes a methodology for the optimization of an impact limiter for a package for the conditioning of spent sealed sources. Two simplified methods for the design of impact limiters are presented. Finally, a brief discussion is presented on the methodology usually employed in the design of accident-resisting packages. (author)

  8. Application of the tack weld to cask impact limiter case

    International Nuclear Information System (INIS)

    Ku, J. H.; Choung, W. M.; You, G. S.; Park, S. W.

    2001-01-01

    The objective of this paper is to evaluate the benefit of the application of intermittent tack weld to the cask impact limiter case in the cask impact accident. This paper describes the test results of weldment rupture of foam filled tube type energy absorber and analytical evaluation of the effect of intermittent tack weld to the cask impact limiter case on the cask impact behavior. Prior to the cask impact analysis, the evaluation of weldment joint was carried out for intermittent tack weldment considering the weldment rupture. The intermittent tack welded part is weaker than ordinary weldment so ruptured if the stress exceeds certain limit. The rupture of the impact limiter case causes to lose its constraining effect for the wood blocks, which are filled into the metal incasement between the case and the gussets. The application of intermittent tack weld to the impact limiter case showed great advantage in vertical and horizontal drop impacts

  9. Benefits of the S/F cask impact limiter weldment imperfection

    International Nuclear Information System (INIS)

    Ku, Jeong Hoe; Lee, Ju Chan; Kim, Jong Hun; Park, Seong Won; Park, Hyun Soo

    2000-01-01

    This paper describes the beneficial effect of weldment imperfection of the cask impact limiter, by applying intermittent-weld, for impact energy absorbing behavior. From the point of view of energy absorbing efficiency of an energy absorber, it is desirable to reduce the crush load resistance and increase the deformation of the energy absorber within certain limit. This paper presents the test results of intermittent-weldment and the analysis results of cask impacts and the discussions of the improvement of impact mitigating effect by the imperfect-weldment. The rupture of imperfect weldment of an impact limiter improves the energy-absorbing efficiency by reducing the crush load amplitude without loss of total energy absorption. The beneficial effect of weldment imperfection should be considered to the cask impact limiter design. (author)

  10. Evaluation of a bi-directional aluminum honeycomb impact limiter design

    International Nuclear Information System (INIS)

    Doman, M.J.

    1995-01-01

    A 120 Ton shipping cask is being developed for the on-site shipment of dry spent fuel at the Idaho National Engineering Laboratory. Impact limiters were incorporated in the cask design to limit the inertial load of the package and its contents during the hypothetical 9-meter (30-foot) drop accident required by 10CFR71. The design process included: (1) a series of static and dynamic tests to determine the crush characteristics of the bi-directional aluminum honeycomb impact limiter material, (2) the development of an analytical model to predict the cask deceleration force as a function of impact limiter crush, and (3) a series of quarter scale model drop tests to qualify the analytical model. The scale model testing, performed at Sandia National Laboratory in Albuquerque, New Mexico, revealed several design aspects which should be considered in developing bi-directional aluminum honeycomb impact limiters and several other design aspects which should be considered for impact limiter designs in general

  11. Crush performance of redwood for developing design procedures for impact limiters

    International Nuclear Information System (INIS)

    Cramer, S.M.; Hermanson, J.C.; McMurtry, W.M.

    1995-01-01

    Containers for the transportation of hazardous and radioactive materials incorporate redwood in impact limiters. Redwood is an excellent energy absorber, but only the most simplistic information exists on its crush properties. Tbe stress-strain interrelationship for any wood species subject to three-dimensional stresses is largely unknown for any all stress condition and wood behavior at both high strains and high strain-rates is known only in general terms. Both stress-strain and crush failure theories have been developed based only on uniaxial load tests. The anisotropy of wood adds an additional complexity to measuring wood response and developing suitable theories to describe it. A long history of wood utilization in the building industry has led to design procedures and property information related to simple uniaxial loadings that do not inflict damage to the wood. This lack of knowledge may be surprising for a material that has a long history of engineered use, but the result is difficulty in utilizing wood in more sophisticated designs such as impact limiters. This study provides a step toward filling the information gap on wood material response for high performance applications such as impact limiters

  12. GA-4/GA-9 honeycomb impact limiter tests and analytical model

    International Nuclear Information System (INIS)

    Koploy, M.A.; Taylor, C.S.

    1991-01-01

    General Atomics (GA) has a test program underway to obtain data on the behavior of a honeycomb impact limiter. The program includes testing of small samples to obtain basic information, as well as testing of complete 1/4-scale impact limiters to obtain load-versus-deflection curves for different crush orientations. GA has used the test results to aid in the development of an analytical model to predict the impact limiter loads. The results also helped optimize the design of the impact limiters for the GA-4 and GA-9 Casks

  13. 10 CFR 51.76 - Draft environmental impact statement-limited work authorization.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Draft environmental impact statement-limited work...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Production and Utilization Facilities § 51.76 Draft environmental impact statement—limited work authorization. The NRC will prepare a...

  14. Impact of Load Behavior on Transient Stability and Power Transfer Limitations

    DEFF Research Database (Denmark)

    Gordon, Mark

    2009-01-01

    This paper presents utility based load modeling practices and explores the interaction between loads and the power system and the effect of the interaction on transient stability and power transfer limitations. The effect of load composition is investigated at major load centers together with the......This paper presents utility based load modeling practices and explores the interaction between loads and the power system and the effect of the interaction on transient stability and power transfer limitations. The effect of load composition is investigated at major load centers together...... with the impact on rotor angle excursions of large scale generators during the transient and post-transient period. Responses of multi-induction motor stalling are also considered for different fault clearances in the system. Findings of the investigations carried out on the Eastern Australian interconnected...

  15. Football Players' Head-Impact Exposure After Limiting of Full-Contact Practices.

    Science.gov (United States)

    Broglio, Steven P; Williams, Richelle M; O'Connor, Kathryn L; Goldstick, Jason

    2016-07-01

    Sporting organizations limit full-contact football practices to reduce concussion risk and based on speculation that repeated head impacts may result in long-term neurodegeneration. To directly compare head-impact exposure in high school football players before and after a statewide restriction on full-contact practices. Cross-sectional study. High school football field. Participants were varsity football athletes from a single high school. Before the rule change, 26 athletes (age = 16.2 ± 0.8 years, height = 179.6 ± 6.4 cm, weight = 81.9 ± 13.1 kg) participated. After the rule change, 24 athletes (age = 15.9 ± 0.8 years, height = 178.3 ± 6.5 cm, weight = 76.2 ± 11.6 kg) participated. Nine athletes participated in both years of the investigation. Head-impact exposure was monitored using the Head Impact Telemetry System while the athletes participated in football games and practices in the seasons before and after the rule change. Head-impact frequency, location, and magnitude (ie, linear acceleration, rotational acceleration, and Head Impact Telemetry severity profile [HITsp], respectively) were measured. A total of 15 398 impacts (592 impacts per player per season) were captured before the rule change and 8269 impacts (345 impacts per player per season) after the change. An average 42% decline in impact exposure occurred across all players, with practice-exposure declines occurring among linemen (46% decline); receivers, cornerbacks, and safeties (41% decline); and tight ends, running backs (including fullbacks), and linebackers (39% decline). Impact magnitudes remained largely unchanged between the years. A rule change limiting full-contact high school football practices appears to have been effective in reducing head-impact exposure across all players, with the largest reduction occurring among linemen. This finding is likely associated with the rule modification, particularly because the coaching staff and offensive scheme remained consistent, yet how

  16. Legal weight truck cask model impact limiter response

    International Nuclear Information System (INIS)

    Meinert, N.M.; Shappert, L.B.

    1989-01-01

    Dynamic and quasi-static quarter-scale model testing was performed to supplement the analytical case presented in the Nuclear Assurance Corporation Legal Weight Truck (NAC LWT) cask transport licensing application. Four successive drop tests from 9.0 meters (30 feet) onto an unyielding surface and one 1.0-meter (40-inch) drop onto a scale mild steel pin 3.8 centimeters (1.5 inches) in diameter, corroborated the impact limiter design and structural analyses presented in the licensing application. Quantitative measurements, made during drop testing, support the impact limiter analyses. High-speed photography of the tests confirm that only a small amount of energy is elastically stored in the aluminum honeycomb and that oblique drop slapdown is not significant. The qualitative conclusion is that the limiter protected LWT cask will not sustain permanent structural damage and containment will be maintained, subsequent to a hypothetical accident, as shown by structural analyses

  17. [Limiting a Medline/PubMed query to the "best" articles using the JCR relative impact factor].

    Science.gov (United States)

    Avillach, P; Kerdelhué, G; Devos, P; Maisonneuve, H; Darmoni, S J

    2014-12-01

    Medline/PubMed is the most frequently used medical bibliographic research database. The aim of this study was to propose a new generic method to limit any Medline/PubMed query based on the relative impact factor and the A & B categories of the SIGAPS score. The entire PubMed corpus was used for the feasibility study, then ten frequent diseases in terms of PubMed indexing and the citations of four Nobel prize winners. The relative impact factor (RIF) was calculated by medical specialty defined in Journal Citation Reports. The two queries, which included all the journals in category A (or A OR B), were added to any Medline/PubMed query as a central point of the feasibility study. Limitation using the SIGAPS category A was larger than the when using the Core Clinical Journals (CCJ): 15.65% of PubMed corpus vs 8.64% for CCJ. The response time of this limit applied to the entire PubMed corpus was less than two seconds. For five diseases out of ten, limiting the citations with the RIF was more effective than with the CCJ. For the four Nobel prize winners, limiting the citations with the RIF was more effective than the CCJ. The feasibility study to apply a new filter based on the relative impact factor on any Medline/PubMed query was positive. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

  18. Green revolution: impacts, limits, and the path ahead.

    Science.gov (United States)

    Pingali, Prabhu L

    2012-07-31

    A detailed retrospective of the Green Revolution, its achievement and limits in terms of agricultural productivity improvement, and its broader impact at social, environmental, and economic levels is provided. Lessons learned and the strategic insights are reviewed as the world is preparing a "redux" version of the Green Revolution with more integrative environmental and social impact combined with agricultural and economic development. Core policy directions for Green Revolution 2.0 that enhance the spread and sustainable adoption of productivity enhancing technologies are specified.

  19. An Internet enabled impact limiter material database

    Energy Technology Data Exchange (ETDEWEB)

    Wix, S.; Kanipe, F.; McMurtry, W.

    1998-09-01

    This paper presents a detailed explanation of the construction of an interest enabled database, also known as a database driven web site. The data contained in the internet enabled database are impact limiter material and seal properties. The technique used in constructing the internet enabled database presented in this paper are applicable when information that is changing in content needs to be disseminated to a wide audience.

  20. An Internet enabled impact limiter material database

    International Nuclear Information System (INIS)

    Wix, S.; Kanipe, F.; McMurtry, W.

    1998-01-01

    This paper presents a detailed explanation of the construction of an interest enabled database, also known as a database driven web site. The data contained in the internet enabled database are impact limiter material and seal properties. The technique used in constructing the internet enabled database presented in this paper are applicable when information that is changing in content needs to be disseminated to a wide audience

  1. Limiting our impact on the environment

    CERN Multimedia

    2012-01-01

    CERN’s fourth safety objective for 2012 concerns the reduction of the environmental impact of noise and energy consumption associated with CERN's activities.   In order to continue to reduce the impact of noise on our neighbours, the HSE Unit is coordinating measures to reduce noise in the environment at all the LHC and SPS points, and on the Meyrin and Prévessin sites. If you are aware of a high-intensity noise that could disturb those living and working close to our sites, you can contact the HSE Unit. And most important of all, please take this potential nuisance into account when you're planning new projects. The HSE Unit is there to help you. The other aspect of our environmental target for the year is to optimise CERN's energy consumption. We can achieve this by limiting the energy consumption of facilities right from the design stage - from small components to large installations - and by using renewable energies even on a sma...

  2. An internet enabled impact limiter material database

    Energy Technology Data Exchange (ETDEWEB)

    Wix, S.; Kanipe, F.; McMurtry, W. [Sandia National Labs., Albuquerque, NM (United States)

    1998-07-01

    This paper presents a detailed explanation of the construction of an internet enabled database, also known as a database driven web site. The data contained in the internet enabled database are impact limiter material and seal properties. The techniques used in constructing the internet enabled database presented in this paper are applicable when information that is changing in content needs to be disseminated to a wide audience. (authors)

  3. An internet enabled impact limiter material database

    International Nuclear Information System (INIS)

    Wix, S.; Kanipe, F.; McMurtry, W.

    1998-01-01

    This paper presents a detailed explanation of the construction of an internet enabled database, also known as a database driven web site. The data contained in the internet enabled database are impact limiter material and seal properties. The techniques used in constructing the internet enabled database presented in this paper are applicable when information that is changing in content needs to be disseminated to a wide audience. (authors)

  4. Chemical Footprint Method for Improved Communication of Freshwater Ecotoxicity Impacts in the Context of Ecological Limits

    DEFF Research Database (Denmark)

    Bjørn, Anders; Diamond, Miriam; Birkved, Morten

    2014-01-01

    The ecological footprint method has been successful in communicating environmental impacts of anthropogenic activities in the context of ecological limits. We introduce a chemical footprint method that expresses ecotoxicity impacts from anthropogenic chemical emissions as the dilution needed...... to avoid freshwater ecosystem damage. The indicator is based on USEtox characterization factors with a modified toxicity reference point. Chemical footprint results can be compared to the actual dilution capacity within the geographic vicinity receiving the emissions to estimate whether its ecological...... limit has been exceeded and hence whether emissions can be expected to be environmentally sustainable. The footprint method was illustrated using two case studies. The first was all inventoried emissions from European countries and selected metropolitan areas in 2004, which indicated that the dilution...

  5. Impact of phosphate limitation on PHA production in a feast-famine process.

    Science.gov (United States)

    Korkakaki, Emmanouela; van Loosdrecht, Mark C M; Kleerebezem, Robbert

    2017-12-01

    Double-limitation systems have shown to induce polyhydroxyalkanoates (PHA) production in chemostat studies limited in e.g. carbon and phosphate. In this work the impact of double substrate limitation on the enrichment of a PHA producing community was studied in a sequencing batch process. Enrichments at different C/P concentration ratios in the influent were established and the effect on the PHA production capacity and the enrichment community structure was investigated. Experimental results demonstrated that when a double substrate limitation is imposed at a C/P ratio in the influent in a range of 150 (C-mol/mol), the P-content of the biomass and the specific substrate uptake rates decreased. Nonetheless, the PHA storage capacity remained high (with a maximum of 84 wt%). At a C/P ratio of 300, competition in the microbial community is based on phosphate uptake, and the PHA production capacity is lost. Biomass specific substrate uptake rates are a linear function of the cellular P-content, offering advantages for scaling-up the PHA production process due to lower oxygen requirements. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Intra-tumor heterogeneity in breast cancer has limited impact on transcriptomic-based molecular profiling.

    Science.gov (United States)

    Karthik, Govindasamy-Muralidharan; Rantalainen, Mattias; Stålhammar, Gustav; Lövrot, John; Ullah, Ikram; Alkodsi, Amjad; Ma, Ran; Wedlund, Lena; Lindberg, Johan; Frisell, Jan; Bergh, Jonas; Hartman, Johan

    2017-11-29

    Transcriptomic profiling of breast tumors provides opportunity for subtyping and molecular-based patient stratification. In diagnostic applications the specimen profiled should be representative of the expression profile of the whole tumor and ideally capture properties of the most aggressive part of the tumor. However, breast cancers commonly exhibit intra-tumor heterogeneity at molecular, genomic and in phenotypic level, which can arise during tumor evolution. Currently it is not established to what extent a random sampling approach may influence molecular breast cancer diagnostics. In this study we applied RNA-sequencing to quantify gene expression in 43 pieces (2-5 pieces per tumor) from 12 breast tumors (Cohort 1). We determined molecular subtype and transcriptomic grade for all tumor pieces and analysed to what extent pieces originating from the same tumors are concordant or discordant with each other. Additionally, we validated our finding in an independent cohort consisting of 19 pieces (2-6 pieces per tumor) from 6 breast tumors (Cohort 2) profiled using microarray technique. Exome sequencing was also performed on this cohort, to investigate the extent of intra-tumor genomic heterogeneity versus the intra-tumor molecular subtype classifications. Molecular subtyping was consistent in 11 out of 12 tumors and transcriptomic grade assignments were consistent in 11 out of 12 tumors as well. Molecular subtype predictions revealed consistent subtypes in four out of six patients in this cohort 2. Interestingly, we observed extensive intra-tumor genomic heterogeneity in these tumor pieces but not in their molecular subtype classifications. Our results suggest that macroscopic intra-tumoral transcriptomic heterogeneity is limited and unlikely to have an impact on molecular diagnostics for most patients.

  7. Determine ISS Soyuz Orbital Module Ballistic Limits for Steel Projectiles Hypervelocity Impact Testing

    Science.gov (United States)

    Lyons, Frankel

    2013-01-01

    A new orbital debris environment model (ORDEM 3.0) defines the density distribution of the debris environment in terms of the fraction of debris that are low-density (plastic), medium-density (aluminum) or high-density (steel) particles. This hypervelocity impact (HVI) program focused on assessing ballistic limits (BLs) for steel projectiles impacting the enhanced Soyuz Orbital Module (OM) micrometeoroid and orbital debris (MMOD) shield configuration. The ballistic limit was defined as the projectile size on the threshold of failure of the OM pressure shell as a function of impact speeds and angle. The enhanced OM shield configuration was first introduced with Soyuz 30S (launched in May 2012) to improve the MMOD protection of Soyuz vehicles docked to the International Space Station (ISS). This test program provides HVI data on U.S. materials similar in composition and density to the Russian materials for the enhanced Soyuz OM shield configuration of the vehicle. Data from this test program was used to update ballistic limit equations used in Soyuz OM penetration risk assessments. The objective of this hypervelocity impact test program was to determine the ballistic limit particle size for 440C stainless steel spherical projectiles on the Soyuz OM shielding at several impact conditions (velocity and angle combinations). This test report was prepared by NASA-JSC/ HVIT, upon completion of tests.

  8. Effect of long-term water immersion or thermal shock on mechanical properties of high-impact acrylic denture base resins.

    Science.gov (United States)

    Sasaki, Hirono; Hamanaka, Ippei; Takahashi, Yutaka; Kawaguchi, Tomohiro

    2016-01-01

    The purpose of this study was to investigate the effect of long-term water immersion or thermal shock on the mechanical properties of high-impact acrylic denture base resins. Two high-impact acrylic denture base resins were selected for the study. Specimens of each denture base material tested were fabricated according to the manufacturers' instructions (n=10). The flexural strength at the proportional limit, the elastic modulus and the impact strength of the specimens were evaluated. The flexural strength at the proportional limit of the high-impact acrylic denture base resins did not change after six months' water immersion or thermocycling 50,000 times. The elastic moduli of the high-impact acrylic denture base resins significantly increased after six months' water immersion or thermocycling 50,000 times. The impact strengths of the high-impact acrylic denture base resins significantly decreased after water immersion or thermocycling as described above.

  9. Limited impacts of truck-based ultra-low-volume applications of mosquito adulticides on mortality in honey bees (Apis mellifera).

    Science.gov (United States)

    Rinkevich, F D; Margotta, J W; Pokhrel, V; Walker, T W; Vaeth, R H; Hoffman, W C; Fritz, B K; Danka, R G; Rinderer, T E; Aldridge, R L; Linthicum, K J; Ottea, J A; Healy, K B

    2017-12-01

    Adulticides applied against mosquitoes can reduce vector populations during times of high arbovirus transmission. However, impacts of these insecticides on pollinators and other non-target organisms are of concern to mosquito control professionals, beekeepers and others. We evaluated mortality of Culex quinquefasciatus and Apis mellifera when caged insects were exposed to low and high label rates of four common adulticides (Aqua-Pursuit™ [permethrin], Duet® [prallethrin + sumithrin], Fyfanon® [malathion] and Scourge® [resmethrin]) at six distances up to 91.4 m from a truck-mounted ultra-low-volume sprayer. Honey bee mortality was both absolutely low (61 m had limited impacts on honey bee mortality while providing effective mosquito control.

  10. Limitations to the Use of Species-Distribution Models for Environmental-Impact Assessments in the Amazon.

    Directory of Open Access Journals (Sweden)

    Lorena Ribeiro de A Carneiro

    Full Text Available Species-distribution models (SDM are tools with potential to inform environmental-impact studies (EIA. However, they are not always appropriate and may result in improper and expensive mitigation and compensation if their limitations are not understood by decision makers. Here, we examine the use of SDM for frogs that were used in impact assessment using data obtained from the EIA of a hydroelectric project located in the Amazon Basin in Brazil. The results show that lack of knowledge of species distributions limits the appropriate use of SDM in the Amazon region for most target species. Because most of these targets are newly described and their distributions poorly known, data about their distributions are insufficient to be effectively used in SDM. Surveys that are mandatory for the EIA are often conducted only near the area under assessment, and so models must extrapolate well beyond the sampled area to inform decisions made at much larger spatial scales, such as defining areas to be used to offset the negative effects of the projects. Using distributions of better-known species in simulations, we show that geographical-extrapolations based on limited information of species ranges often lead to spurious results. We conclude that the use of SDM as evidence to support project-licensing decisions in the Amazon requires much greater area sampling for impact studies, or, alternatively, integrated and comparative survey strategies, to improve biodiversity sampling. When more detailed distribution information is unavailable, SDM will produce results that generate uncertain and untestable decisions regarding impact assessment. In many cases, SDM is unlikely to be better than the use of expert opinion.

  11. Finite element limit analysis based plastic limit pressure solutions for cracked pipes

    International Nuclear Information System (INIS)

    Shim, Do Jun; Huh, Nam Su; Kim, Yun Jae; Kim, Young Jin

    2002-01-01

    Based on detailed FE limit analyses, the present paper provides tractable approximations for plastic limit pressure solutions for axial through-wall cracked pipe; axial (inner) surface cracked pipe; circumferential through-wall cracked pipe; and circumferential (inner) surface cracked pipe. Comparisons with existing analytical and empirical solutions show a large discrepancy in circumferential short through-wall cracks and in surface cracks (both axial and circumferential). Being based on detailed 3-D FE limit analysis, the present solutions are believed to be the most accurate, and thus to be valuable information not only for plastic collapse analysis of pressurised piping but also for estimating non-linear fracture mechanics parameters based on the reference stress approach

  12. Validation of an impact limiter crush prediction model with test data: the case of the HI-STAR 100 package

    International Nuclear Information System (INIS)

    Singh, K.P.; Soler, A.I.; Bullard, C.W.

    2004-01-01

    An impact limiter is an essential appurtenance in a Part 71 transport package. The impact limiter serves to protect the cask contents from excessive deceleration in the event of a mechanical accident. 10CFR71.73 (as do the IAEA regulations) specifies a drop height of 9 meters (30 feet) onto an essentially rigid surface as the design requirement for the impact limiter. The orientation of the cask relative to the ''target'' at the instance of the impact, however, is not specified in the regulations. Therefore, the impact limiter must be capable of limiting the cask's deceleration to a prescribed limit regardless of the cask's orientation at impact. In addition to the indeterminacy with respect to the orientation at impact, the impact limiter must be capable of performing its intended function under a wide range of ambient conditions, ranging from -20 F to 100 F, and relative humidity from zero to 100%

  13. Risk based limits for Operational Safety Requirements

    International Nuclear Information System (INIS)

    Cappucci, A.J. Jr.

    1993-01-01

    OSR limits are designed to protect the assumptions made in the facility safety analysis in order to preserve the safety envelope during facility operation. Normally, limits are set based on ''worst case conditions'' without regard to the likelihood (frequency) of a credible event occurring. In special cases where the accident analyses are based on ''time at risk'' arguments, it may be desirable to control the time at which the facility is at risk. A methodology has been developed to use OSR limits to control the source terms and the times these source terms would be available, thus controlling the acceptable risk to a nuclear process facility. The methodology defines a new term ''gram-days''. This term represents the area under a source term (inventory) vs time curve which represents the risk to the facility. Using the concept of gram-days (normalized to one year) allows the use of an accounting scheme to control the risk under the inventory vs time curve. The methodology results in at least three OSR limits: (1) control of the maximum inventory or source term, (2) control of the maximum gram-days for the period based on a source term weighted average, and (3) control of the maximum gram-days at the individual source term levels. Basing OSR limits on risk based safety analysis is feasible, and a basis for development of risk based limits is defensible. However, monitoring inventories and the frequencies required to maintain facility operation within the safety envelope may be complex and time consuming

  14. Impact analysis of TOTEM data at the LHC: black disk limit exceeded

    CERN Document Server

    Alkin, A; Kovalenko, O; Troshin, S M

    2015-01-01

    We discuss the profile of the impact--parameter dependent elastic scattering amplitude. Extraction of impact-parameter dependence from the dataset with inclusion of the experimental data on elastic scattering at the LHC energies helps to reveal the asymptotics of hadron interactions. Analysis of the data clearly indicates that the impact-parameter elastic scattering amplitude exceed the black disk limit at the LHC energy 7TeV and the inelastic overlap function reaches its maximum value at $b>0$

  15. Testing of materials and scale models for impact limiters

    International Nuclear Information System (INIS)

    Maji, A.K.; Satpathi, D.; Schryer, H.L.

    1991-01-01

    Aluminum Honeycomb and Polyurethane foam specimens were tested to obtain experimental data on the material's behavior under different loading conditions. This paper reports the dynamic tests conducted on the materials and on the design and testing of scale models made out of these open-quotes Impact Limiters,close quotes as they are used in the design of transportation casks. Dynamic tests were conducted on a modified Charpy Impact machine with associated instrumentation, and compared with static test results. A scale model testing setup was designed and used for preliminary tests on models being used by current designers of transportation casks. The paper presents preliminary results of the program. Additional information will be available and reported at the time of presentation of the paper

  16. Research on environmental impact of water-based fire extinguishing agents

    Science.gov (United States)

    Wang, Shuai

    2018-02-01

    This paper offers current status of application of water-based fire extinguishing agents, the environmental and research considerations of the need for the study of toxicity research. This paper also offers systematic review of test methods of toxicity and environmental impact of water-based fire extinguishing agents currently available, illustrate the main requirements and relevant test methods, and offer some research findings for future research considerations. The paper also offers limitations of current study.

  17. Impact Angle and Time Control Guidance Under Field-of-View Constraints and Maneuver Limits

    Science.gov (United States)

    Shim, Sang-Wook; Hong, Seong-Min; Moon, Gun-Hee; Tahk, Min-Jea

    2018-04-01

    This paper proposes a guidance law which considers the constraints of seeker field-of-view (FOV) as well as the requirements on impact angle and time. The proposed guidance law is designed for a constant speed missile against a stationary target. The guidance law consists of two terms of acceleration commands. The first one is to achieve zero-miss distance and the desired impact angle, while the second is to meet the desired impact time. To consider the limits of FOV and lateral maneuver capability, a varying-gain approach is applied on the second term. Reduction of realizable impact times due to these limits is then analyzed by finding the longest course among the feasible ones. The performance of the proposed guidance law is demonstrated by numerical simulation for various engagement conditions.

  18. 100 nm scale low-noise sensors based on aligned carbon nanotube networks: overcoming the fundamental limitation of network-based sensors

    Science.gov (United States)

    Lee, Minbaek; Lee, Joohyung; Kim, Tae Hyun; Lee, Hyungwoo; Lee, Byung Yang; Park, June; Jhon, Young Min; Seong, Maeng-Je; Hong, Seunghun

    2010-02-01

    Nanoscale sensors based on single-walled carbon nanotube (SWNT) networks have been considered impractical due to several fundamental limitations such as a poor sensitivity and small signal-to-noise ratio. Herein, we present a strategy to overcome these fundamental problems and build highly-sensitive low-noise nanoscale sensors simply by controlling the structure of the SWNT networks. In this strategy, we prepared nanoscale width channels based on aligned SWNT networks using a directed assembly strategy. Significantly, the aligned network-based sensors with narrower channels exhibited even better signal-to-noise ratio than those with wider channels, which is opposite to conventional random network-based sensors. As a proof of concept, we demonstrated 100 nm scale low-noise sensors to detect mercury ions with the detection limit of ~1 pM, which is superior to any state-of-the-art portable detection system and is below the allowable limit of mercury ions in drinking water set by most government environmental protection agencies. This is the first demonstration of 100 nm scale low-noise sensors based on SWNT networks. Considering the increased interests in high-density sensor arrays for healthcare and environmental protection, our strategy should have a significant impact on various industrial applications.

  19. 100 nm scale low-noise sensors based on aligned carbon nanotube networks: overcoming the fundamental limitation of network-based sensors

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Minbaek; Lee, Joohyung; Kim, Tae Hyun; Lee, Hyungwoo; Lee, Byung Yang; Hong, Seunghun [Department of Physics and Astronomy, Seoul National University, Shilim-Dong, Kwanak-Gu, Seoul 151-742 (Korea, Republic of); Park, June; Seong, Maeng-Je [Department of Physics, Chung-Ang University, Heukseok-Dong, Dongjak-Gu, Seoul 156-756 (Korea, Republic of); Jhon, Young Min, E-mail: mseong@cau.ac.kr, E-mail: shong@phya.snu.ac.kr [Korea Institute of Science and Technology, Hawolgok-Dong, Seongbuk-Gu, Seoul 136-791 (Korea, Republic of)

    2010-02-05

    Nanoscale sensors based on single-walled carbon nanotube (SWNT) networks have been considered impractical due to several fundamental limitations such as a poor sensitivity and small signal-to-noise ratio. Herein, we present a strategy to overcome these fundamental problems and build highly-sensitive low-noise nanoscale sensors simply by controlling the structure of the SWNT networks. In this strategy, we prepared nanoscale width channels based on aligned SWNT networks using a directed assembly strategy. Significantly, the aligned network-based sensors with narrower channels exhibited even better signal-to-noise ratio than those with wider channels, which is opposite to conventional random network-based sensors. As a proof of concept, we demonstrated 100 nm scale low-noise sensors to detect mercury ions with the detection limit of {approx}1 pM, which is superior to any state-of-the-art portable detection system and is below the allowable limit of mercury ions in drinking water set by most government environmental protection agencies. This is the first demonstration of 100 nm scale low-noise sensors based on SWNT networks. Considering the increased interests in high-density sensor arrays for healthcare and environmental protection, our strategy should have a significant impact on various industrial applications.

  20. 100 nm scale low-noise sensors based on aligned carbon nanotube networks: overcoming the fundamental limitation of network-based sensors

    International Nuclear Information System (INIS)

    Lee, Minbaek; Lee, Joohyung; Kim, Tae Hyun; Lee, Hyungwoo; Lee, Byung Yang; Hong, Seunghun; Park, June; Seong, Maeng-Je; Jhon, Young Min

    2010-01-01

    Nanoscale sensors based on single-walled carbon nanotube (SWNT) networks have been considered impractical due to several fundamental limitations such as a poor sensitivity and small signal-to-noise ratio. Herein, we present a strategy to overcome these fundamental problems and build highly-sensitive low-noise nanoscale sensors simply by controlling the structure of the SWNT networks. In this strategy, we prepared nanoscale width channels based on aligned SWNT networks using a directed assembly strategy. Significantly, the aligned network-based sensors with narrower channels exhibited even better signal-to-noise ratio than those with wider channels, which is opposite to conventional random network-based sensors. As a proof of concept, we demonstrated 100 nm scale low-noise sensors to detect mercury ions with the detection limit of ∼1 pM, which is superior to any state-of-the-art portable detection system and is below the allowable limit of mercury ions in drinking water set by most government environmental protection agencies. This is the first demonstration of 100 nm scale low-noise sensors based on SWNT networks. Considering the increased interests in high-density sensor arrays for healthcare and environmental protection, our strategy should have a significant impact on various industrial applications.

  1. Electro-mechanical impact system excited by a source of limited power

    Czech Academy of Sciences Publication Activity Database

    Půst, Ladislav

    2008-01-01

    Roč. 15, č. 6 (2008), s. 1-10 ISSN 1802-1484 R&D Projects: GA ČR GA101/06/0063 Institutional research plan: CEZ:AV0Z20760514 Keywords : mechanical oscillations * impacts * limited power of exciter * electro-mechanical interaction Subject RIV: BI - Acoustics

  2. Impact of Base Station Cooperation on Cell Planning

    Directory of Open Access Journals (Sweden)

    Ian Dexter Garcia

    2010-01-01

    Full Text Available Base station cooperation (BSC has been identified as a key radio access technology for next-generation cellular networks such as LTE-Advanced. BSC impacts cell planning, which is the methodical selection of base station (BS sites, and BS equipment configuration for cost-effective cellular networks. In this paper, the impact of BSC on cell plan parameters (coverage, traffic, handover, and cost, as well as additional cell planning steps required for BSC are discussed. Results show that BSC maximizes its gains over noncooperation (NC in a network wherein interference from cooperating BSs is the main limitation. Locations exist where NC may produce higher throughputs, therefore dynamic or semistatic switching between BSC and NC, called fractional BSC, is recommended. Because of interference from noncooperating BSs, the gains of BSC over NC are upper bounded, and diminishes at greater intersite distances because of noise. This encourages smaller cell sizes, higher transmit powers, and dynamic clustering of cooperative BSs.

  3. Power MOSFET-diode-based limiter for high-frequency ultrasound systems.

    Science.gov (United States)

    Choi, Hojong; Kim, Min Gon; Cummins, Thomas M; Hwang, Jae Youn; Shung, K Kirk

    2014-10-01

    The purpose of the limiter circuits used in the ultrasound imaging systems is to pass low-voltage echo signals generated by ultrasonic transducers while preventing high-voltage short pulses transmitted by pulsers from damaging front-end circuits. Resistor-diode-based limiters (a 50 Ω resistor with a single cross-coupled diode pair) have been widely used in pulse-echo measurement and imaging system applications due to their low cost and simple architecture. However, resistor-diode-based limiters may not be suited for high-frequency ultrasound transducer applications since they produce large signal conduction losses at higher frequencies. Therefore, we propose a new limiter architecture utilizing power MOSFETs, which we call a power MOSFET-diode-based limiter. The performance of a power MOSFET-diode-based limiter was evaluated with respect to insertion loss (IL), total harmonic distortion (THD), and response time (RT). We compared these results with those of three other conventional limiter designs and showed that the power MOSFET-diode-based limiter offers the lowest IL (-1.33 dB) and fastest RT (0.10 µs) with the lowest suppressed output voltage (3.47 Vp-p) among all the limiters at 70 MHz. A pulse-echo test was performed to determine how the new limiter affected the sensitivity and bandwidth of the transducer. We found that the sensitivity and bandwidth of the transducer were 130% and 129% greater, respectively, when combined with the new power MOSFET-diode-based limiter versus the resistor-diode-based limiter. Therefore, these results demonstrate that the power MOSFET-diode-based limiter is capable of producing lower signal attenuation than the three conventional limiter designs at higher frequency operation. © The Author(s) 2014.

  4. Derived limits for radiological protection against ionizing radiation based on ICRP-60 recommendations

    International Nuclear Information System (INIS)

    Jang, Si Young; Lee, Byung Soo

    2000-01-01

    In Korea the dose limits are reduced and are set at the ICRP-60 limits. However, derived limits tabulated as MPC in air and water are sill specified in Notice Nol 98-12. There are some discrepancies between the primary dose limits and MPCs in air and water. Therefore, in order to accept ICRP-60 recommendations fully, derived limits such as ALI, DAC, ECL for radiological protection against ionizing radiation based on ICRP-60 recommendations were calculated using modified methods of those of 10 CFR part 20, dose limits and committed effective dose coefficients of the Basic Safety Standards of the IAEA. The derived limits in this study were also compared with those prescribed in 10 CFR part 20 as well as MPCs of Notice No.98-12 in order to analyze the impact of implementing derived limits on nuclear facilities. ECLs in air and water for the control of radioactive discharge into the environment in this study are shown to have lower values (i.e. more conservative), for most part, than those in Notice No. 98-12. Especially, for uranium elements, ECLs in water are approximately a magnitude in the order of two lower than those in Notice No. 98-12. (author)

  5. Evaluation of mechanical properties and low velocity impact characteristics of balsa wood and urethane foam applied to impact limiter of nuclear spent fuel shipping cask

    Energy Technology Data Exchange (ETDEWEB)

    Goo, Junsung; Shin, Kwangbok [Hanbat Nat' l Univ., Daejeon (Korea, Republic of); Choi, Woosuk [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2012-11-15

    The paper aims to evaluate the low velocity impact responses and mechanical properties of balsa wood and urethane foam core materials and their sandwich panels, which are applied as the impact limiter of a nuclear spent fuel shipping cask. For the urethane foam core, which is isotropic, tensile, compressive, and shear mechanical tests were conducted. For the balsa wood core, which is orthotropic and shows different material properties in different orthogonal directions, nine mechanical properties were determined. The impact test specimens for the core material and their sandwich panel were subjected to low velocity impact loads using an instrumented testing machine at impact energy levels of 1, 3, and 5J. The experimental results showed that both the urethane foam and the balsa wood core except in the growth direction (z-direction) had a similar impact response for the energy absorbing capacity, contact force, and indentation. Furthermore, it was found that the urethane foam core was suitable as an impact limiter material owing to its resistance to fire and low cost, and the balsa wood core could also be strongly considered as an impact limiter material for a lightweight nuclear spent fuel shipping cask.

  6. Bases for establishing radiation exposure limits

    International Nuclear Information System (INIS)

    Pochin, E.E.

    1977-01-01

    It is an essential requirement of good radiation protection that all unnecessary exposure of people should be avoided and that any necessary exposure, whether of workers or of members of the general public, should be minimized. It is, however, an additional requirement that such necessary exposures should not exceed certain stated limits. These principles are based on the possibility that even the smallest exposures may involve some risk of harm, that any risk of harm should be justifiable by the circumstances necessitating it, and that risk should always be limited to an appropriately low level. The bases for establishing exposure limits must therefore involve an assessment of the risk involved in any form of radiation exposure, and an opinion as to the degree of safety that should be ensured in circumstances which necessitate any occupational or public exposure to radiation. There is increasing quantitative evidence on the frequency on which harm, and particularly the induction of malignancies, may be caused in people exposed to radiation at high doses; and somewhat clearer bases than previously for inferring the possible frequencies at low doses. It is therefore easier to assess the degree of safety ensured by restricting radiation exposure to particular levels. It is clear also that a comparable degree of safety should be ensured whether the radiation exposure involves the whole body more of less uniformly, or individual tissues or organs selectively. The ''weighting'' factors appropriate to irradiation of particular tissues from internal emitters can thus be defined in terms of their likely individual contributions to the harm of whole-body irradiation. In this way the limits for different modes of exposure by external or internal radiation can be related so as to ensure that protection should be equally effective for different distributions of absorbed dose in the body. In particular, the over-simplified concept of a single critical organ determining the

  7. Mechanical properties of aluminium honeycomb impact limiters

    International Nuclear Information System (INIS)

    Maji, A.K.; Satpathi, D.; Donald, S.

    1992-01-01

    Aluminium honeycombs have been extensively used as impact limiters in nuclear waste transport casks. The mechanical behaviour of these shock absorbing materials was studied to develop an extensive experimental database. A series of tests were performed along various loading paths. Different densities of aluminium honeycombs were tested in different orientations. Static tests included uniaxial tension, uniaxial compression and torsion. Dynamic tests were conducted at different strain rates of up to 100 s -1 , to generate experimental data relevant to accident situations. Dynamic studies included the effects of specimen size and confinement. The purpose of using different loading paths was to generate an extensive experimental database which may also be used to develop constitutive models for these materials. Design charts were constructed which can be accessed by various cask designers to optimise and economise on cask development. (Author)

  8. Threshold limit values, permissible exposure limits, and feasibility: The bases for exposure limits in the United States

    International Nuclear Information System (INIS)

    Rappaport, S.M.

    1993-01-01

    The development of exposure limits in the United States has always relied heavily upon the threshold limit values (TLVs) developed by the American Conference of Governmental Industrial Hygienists (ACGIH). In fact, the TLVs were adopted as official exposure limits by the Occupational Safety and Health Administration (OSHA) in 1972 and 1989. Given the continuing importance of the ACGIH limits, this paper compares the basis of the TLVs with that employed by OSHA de novo in its 12 new permissible exposure limits (PELs). Using benzene as an example, it is shown that OSHA's new PELs have been established following a rigorous assessment of the inherent risks and the feasibility of instituting the limit. The TLVs, on the other hand, have been developed by ad hoc procedures and appear to have traditionally reflected levels thought to be achievable at the time. However, this might be changing. Analysis of the historical reductions of TLVs, for 27 substances on the 1991-1992 list of intended changes, indicates smaller reductions in the past (median reduction of 2.0-2.5-fold between 1946 and 1988) compared to those currently being observed (median reduction of 7.5-fold between 1989 and 1991). Further analysis suggests a more aggressive policy of the ACGIH regarding TLVs for carcinogens but not for substances that produce effects other than cancer. Regardless of whether the basis of the TLVs has changed recently, it would take a relatively long time for the impact of any change to be felt, since the median age of the 1991-1992 TLVs is 16.5 years, and 75% of these limits are more than 10 years old. The implications of OSHA's continued reliance on the TLVs as a means of updating its PELs are discussed, and four alternatives are presented to the ACGIH regarding the future of its activities related to exposure limits. It is concluded that new mechanisms are needed for OSHA to update its PELs in a timely fashion so that the TLVs will not be adopted by default in the future

  9. Limitations of power conversion systems under transient loads and impact on the pulsed tokamak power reactor

    International Nuclear Information System (INIS)

    Sager, G.T.; Wong, C.P.C.; Kapich, D.D.; McDonald, C.F.; Schleicher, R.W.

    1993-11-01

    The impact of cyclic loading of the power conversion system of a helium-cooled, pulsed tokamak power plant is assessed. Design limits of key components of heat transport systems employing Rankie and Brayton thermodynamic cycles are quantified based on experience in gas-cooled fission reactor design and operation. Cyclic loads due to pulsed tokamak operation are estimated. Expected performance of the steam generator is shown to be incompatible with pulsed tokamak operation without load leveling thermal energy storage. The close cycle gas turbine is evaluated qualitatively based on performance of existing industrial and aeroderivative gas turbines. Advances in key technologies which significantly improve prospects for operation with tokamak fusion plants are reviewed

  10. Scrape-off layer based modelling of the density limit in beryllated JET limiter discharges

    International Nuclear Information System (INIS)

    Borrass, K.; Campbell, D.J.; Clement, S.; Vlases, G.C.

    1993-01-01

    The paper gives a scrape-off layer based interpretation of the density limit in beryllated JET limiter discharges. In these discharges, JET edge parameters show a complicated time evolution as the density limit is approached and the limit is manifested as a non-disruptive density maximum which cannot be exceeded by enhanced gas puffing. The occurrence of Marfes, the manner of density control and details of recycling are essential elements of the interpretation. Scalings for the maximum density are given and compared with JET data. The relation to disruptive density limits, previously observed in JET carbon limiter discharges, and to density limits in divertor discharges is discussed. (author). 18 refs, 10 figs, 1 tab

  11. Impact of Intragranular Substructure Parameters on the Forming Limit Diagrams of Single-Phase B.C.C. Steels

    Directory of Open Access Journals (Sweden)

    Gérald Franz

    2013-11-01

    Full Text Available An advanced elastic-plastic self-consistent polycrystalline model, accounting for intragranular microstructure development and evolution, is coupled with a bifurcation-based localization criterion and applied to the numerical investigation of the impact of microstructural patterns on ductility of single-phase steels. The proposed multiscale model, taking into account essential microstructural aspects, such as initial and induced textures, dislocation densities, and softening mechanisms, allows us to emphasize the relationship between intragranular microstructure of B.C.C. steels and their ductility. A qualitative study in terms of forming limit diagrams for various dislocation networks, during monotonic loading tests, is conducted in order to analyze the impact of intragranular substructure parameters on the formability of single-phase B.C.C. steels.

  12. Bases for establishing radiation exposure limits

    International Nuclear Information System (INIS)

    Pochin, E.E.

    1977-01-01

    It is an essential requirement of good radiation protection that all unnecessary exposure of people should be avoided and that any necessary exposure, whether of workers or of members of the general public, should be minimised. It is, however, an additional requirement that such necessary exposures should not exceed certain stated limits. These principles are based on the possibility that even the smallest exposures may involve some risk of harm, that any risk of harm should be justifiable by the circumstances necessitating it, and that risk should always be limited to an appropriately low level. The bases for establishing exposure limits must therefore involve an assessment of the risk involved in any form of radiation exposure, and an opinion as to the degree of safety that should be ensured in circumstances which necessitate any occupational or public exposure to radiation. There is increasing quantitative evidence on the frequency on which harm, and particularly the induction of malignancies, may be caused in people exposed to radiation at high doses; and somewhat clearer bases than previously for inferring the possible frequencies at low doses. It is therefore easier to assess the degree of safety ensured by restricting radiation exposure to particular levels. The degree of safety which should be regarded as appropriate in different circumstances remains a matter for review, but suggestions are made as to levels which would be advocated by informed opinion, and the exposure limits which would correspond to these. It is clear also that a comparable degree of safety should be ensured whether the radiation exposure involves the whole body more of less uniformly, or individual tissues or organs selectively. Increasing epidemiological evidence is available on the relative sensitivity to radiation induction of malignancies in a number of organs, and to the apparently much lower sensitivity of other organs; and experimental evidence in animals allows a comparable

  13. Impact of reduced dose limits on NRC licensed activities. Major issues in the implementation of ICRP/NCRP dose limit recommendations: Final report

    International Nuclear Information System (INIS)

    Meinhold, C.B.

    1995-05-01

    This report summarizes information required to estimate, at least qualitatively, the potential impacts of reducing occupational dose limits below those given in 10 CFR 20 (Revised). For this study, a questionnaire was developed and widely distributed to the radiation protection community. The resulting data together with data from existing surveys and sources were used to estimate the impact of three dose-limit options; 10 mSv yr -1 (1 rem yr -1 ), 20 mSv yr -1 (2 rem yr -1 ), and a combination of an annual limit of 50 mSv yr -1 (5 rem yr -1 ) coupled with a cumulative limit, in rem, equal to age in years. Due to the somewhat small number of responses and the lack of data in some specific areas, a working committee of radiation protection experts from a variety of licensees was employed to ensure the exposure data were representative. The following overall conclusions were reached: (1) although 10 mSv yr -1 is a reasonable limit for many licensees, such a limit could be extraordinarily difficult to achieve and potentially destructive to the continued operation of some licensees, such as nuclear power, fuel fabrication, and medicine; (2) twenty mSv yr -1 as a limit is possible for some of these groups, but for others it would prove difficult. (3) fifty mSv yr -1 and age in 10s of mSv appear reasonable for all licensees, both in terms of the lifetime risk of cancer and severe genetic effects to the most highly exposed workers, and the practicality of operation

  14. Elastic modulus and flexural strength comparisons of high-impact and traditional denture base acrylic resins

    Directory of Open Access Journals (Sweden)

    Nour M. Ajaj-ALKordy

    2014-01-01

    Conclusion: Within the limitations of this study, it can be concluded that the high-impact acrylic resin is a suitable denture base material for patients with clinical fracture of the acrylic denture.

  15. The use of castor oil polyurethane foam in impact limiters for radioactive materials packages

    International Nuclear Information System (INIS)

    Mouro, R.P.; Neto, M.M.

    2003-01-01

    This paper presents ongoing research aiming to assess the use of a 'bio based' polyurethane foam as filling material in impact limiters for transport packages in the nuclear field. The foam is made from castor oil, which replaces the petroleum based polyols in the manufacture of polyurethane products, with good environmental advantages. The research comprises the selection of the cellular material, its structural characterisation by mechanical laboratory tests, the development of a case study, preliminary determination of the best foam density for the case study, performance of the case and its numerical simulation using the finite element method. Prototypes with foam density that is pre-determined as ideal, as well as prototypes using lighter and heavier foams, were tested for comparison. The results obtained validate the research methodology, as expectations about the ideal foam density were confirmed by the drop tests and the numerical simulation. (author)

  16. Monetary valorization of the sanitary and environmental impacts of a nuclear accident: synthesis of ''ExternE'' studies, interests and limits of complementary developments; Valorisation monetaire des impacts sanitaires et environnementaux d'un accident nucleaire: synthese des etudes externe, interets et limites de developpements complementaires

    Energy Technology Data Exchange (ETDEWEB)

    Schieber, C.; Schneider, Th

    2002-09-01

    This document constitutes a synthesis of the various available methods for the monetary evaluation of the nuclear accidents impacts in order to reveal the already evaluated impacts, those which need complementary developments and those for which the monetary approach currently seems to come up against limits. It is based primarily on the approach realized by the ''ExternE'' project of the European Commission, consisting in the evaluation of the external costs of the nuclear energy industry. (A.L.B.)

  17. Limitations and pitfalls of climate change impact analysis on urban rainfall extremes

    DEFF Research Database (Denmark)

    Willems, P.; Olsson, J.; Arnbjerg-Nielsen, Karsten

    Under the umbrella of the IWA/IAHR Joint Committee on Urban Drainage, the International Working Group on Urban Rainfall (IGUR) has reviewed existing methodologies for the analysis of long-term historical and future trends in urban rainfall extremes and their effects on urban drainage systems, due...... to anthropogenic climate change. Current practices have several limitations and pitfalls, which are important to be considered by trend or climate change impact modellers and users of trend/impact results. Climate change may well be the driver that ensures that changes in urban drainage paradigms are identified...... and suitable solutions implemented. Design and optimization of urban drainage infrastructure considering climate change impacts and co-optimizing with other objectives will become ever more important to keep our cities liveable into the future....

  18. 3D, wideband vibro-impacting-based piezoelectric energy harvester

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Qiangmo; Yang, Jin, E-mail: yangjin@cqu.edu.cn; Yue, Xihai; Yang, Aichao; Zhao, Jiangxin; Zhao, Nian; Wen, Yumei; Li, Ping [Department of Optoelectronic Engineering, Research Center of Sensors and Instruments, Chongqing University, Chongqing 400044 (China)

    2015-04-15

    An impacting-based piezoelectric energy harvester was developed to address the limitations of the existing approaches in single-dimensional operation as well as a narrow working bandwidth. In the harvester, a spiral cylindrical spring rather than the conventional thin cantilever beam was utilized to extract the external vibration with arbitrary directions, which has the capability to impact the surrounding piezoelectric beams to generate electricity. And the introduced vibro-impacting between the spiral cylindrical spring and multi-piezoelectric-beams resulted in not only a three-dimensional response to external vibration, but also a bandwidth-broadening behavior. The experimental results showed that each piezoelectric beam exhibited a maximum bandwidth of 8 Hz and power of 41 μW with acceleration of 1 g (with g=9.8 ms{sup −2}) along the z-axis, and corresponding average values of 5 Hz and 45 μW with acceleration of 0.6 g in the x-y plane. .

  19. 3D, wideband vibro-impacting-based piezoelectric energy harvester

    International Nuclear Information System (INIS)

    Yu, Qiangmo; Yang, Jin; Yue, Xihai; Yang, Aichao; Zhao, Jiangxin; Zhao, Nian; Wen, Yumei; Li, Ping

    2015-01-01

    An impacting-based piezoelectric energy harvester was developed to address the limitations of the existing approaches in single-dimensional operation as well as a narrow working bandwidth. In the harvester, a spiral cylindrical spring rather than the conventional thin cantilever beam was utilized to extract the external vibration with arbitrary directions, which has the capability to impact the surrounding piezoelectric beams to generate electricity. And the introduced vibro-impacting between the spiral cylindrical spring and multi-piezoelectric-beams resulted in not only a three-dimensional response to external vibration, but also a bandwidth-broadening behavior. The experimental results showed that each piezoelectric beam exhibited a maximum bandwidth of 8 Hz and power of 41 μW with acceleration of 1 g (with g=9.8 ms −2 ) along the z-axis, and corresponding average values of 5 Hz and 45 μW with acceleration of 0.6 g in the x-y plane. 

  20. Impact of reduced dose limits on NRC licensed activities. Major issues in the implementation of ICRP/NCRP dose limit recommendations: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Meinhold, C.B. [Brookhaven National Lab., Upton, NY (United States)

    1995-05-01

    This report summarizes information required to estimate, at least qualitatively, the potential impacts of reducing occupational dose limits below those given in 10 CFR 20 (Revised). For this study, a questionnaire was developed and widely distributed to the radiation protection community. The resulting data together with data from existing surveys and sources were used to estimate the impact of three dose-limit options; 10 mSv yr{sup {minus}1} (1 rem yr{sup {minus}1}), 20 mSv yr{sup {minus}1} (2 rem yr{sup {minus}1}), and a combination of an annual limit of 50 mSv yr{sup {minus}1} (5 rem yr{sup {minus}1}) coupled with a cumulative limit, in rem, equal to age in years. Due to the somewhat small number of responses and the lack of data in some specific areas, a working committee of radiation protection experts from a variety of licensees was employed to ensure the exposure data were representative. The following overall conclusions were reached: (1) although 10 mSv yr{sup {minus}1} is a reasonable limit for many licensees, such a limit could be extraordinarily difficult to achieve and potentially destructive to the continued operation of some licensees, such as nuclear power, fuel fabrication, and medicine; (2) twenty mSv yr{sup {minus}1} as a limit is possible for some of these groups, but for others it would prove difficult. (3) fifty mSv yr{sup {minus}1} and age in 10s of mSv appear reasonable for all licensees, both in terms of the lifetime risk of cancer and severe genetic effects to the most highly exposed workers, and the practicality of operation.

  1. Digital Sequences and a Time Reversal-Based Impact Region Imaging and Localization Method

    Science.gov (United States)

    Qiu, Lei; Yuan, Shenfang; Mei, Hanfei; Qian, Weifeng

    2013-01-01

    To reduce time and cost of damage inspection, on-line impact monitoring of aircraft composite structures is needed. A digital monitor based on an array of piezoelectric transducers (PZTs) is developed to record the impact region of impacts on-line. It is small in size, lightweight and has low power consumption, but there are two problems with the impact alarm region localization method of the digital monitor at the current stage. The first one is that the accuracy rate of the impact alarm region localization is low, especially on complex composite structures. The second problem is that the area of impact alarm region is large when a large scale structure is monitored and the number of PZTs is limited which increases the time and cost of damage inspections. To solve the two problems, an impact alarm region imaging and localization method based on digital sequences and time reversal is proposed. In this method, the frequency band of impact response signals is estimated based on the digital sequences first. Then, characteristic signals of impact response signals are constructed by sinusoidal modulation signals. Finally, the phase synthesis time reversal impact imaging method is adopted to obtain the impact region image. Depending on the image, an error ellipse is generated to give out the final impact alarm region. A validation experiment is implemented on a complex composite wing box of a real aircraft. The validation results show that the accuracy rate of impact alarm region localization is approximately 100%. The area of impact alarm region can be reduced and the number of PZTs needed to cover the same impact monitoring region is reduced by more than a half. PMID:24084123

  2. Influences of nuclear containment radius on the aircraft impact force based on the Riera function

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, T.; Wu, H., E-mail: abrahamhao@126.com; Fang, Q.; Gong, Z.M.

    2015-11-15

    Highlights: • A fine aircraft model of A320 was built and verified by available limited prototype impacting tests. • The influences of aircraft longitudinal crushing strength on the impact process were analyzed. • The influences of NPP containment radius on the impact force were numerically studied. • The Riera function was modified by considering the radius effect of NPP containment. - Abstract: The aircraft impact force directly influences the local failure and global response of the nuclear power plant (NPP) containment, while the existing theoretical models and the field tests were almost based on the flat target. In order to analyze the radius effect of the circular sectional containment on the impact force, a fine FE model of the commercial aircraft A320 was established and validated by the available limited full-scale F-4 Phantom impact experiment. In order to determine the force to crush the A320 FE model, the influences of aircraft longitudinal crushing strength on the impact process were analyzed based on the Riera function. Considering the containment decaying effect to aircraft impact velocity, the impact impulse was theoretically calculated, while the influences of the losses of mass and energy were not included. The numerical simulations of A320 aircrafts impacting on simplified NPP containments with different radii were conducted, which could well reproduce the airframe crushing and debris scattering. By comparison of the simulated impact impulses and the calculation values by the Riera function, the coefficients corresponding to different containment radii are derived and a fitting formula is obtained. Finally, an improved Riera function dependent on the dimensionless ratio of nuclear containment radius and aircraft wingspan is proposed.

  3. Investigation of the behaviour of impact limiting devices of transport casks for radioactive materials in the package approval and risk analysis

    International Nuclear Information System (INIS)

    Neumann, Martin

    2009-01-01

    Transport casks for radioactive materials with a Type-B package certificate have to ensure that even under severe accident scenarios the radioactive content remains safely enclosed, in an undercritical arrangement and that ionising radiation is sufficiently shielded. The impact limiter absorbs in an accident scenario the major part of the impact energy and reduces the maximum force applied on the cask body. Therefore the simulation of the behaviour of impact limiting devices of transport casks for nuclear material is of great interest for the design assessment in the package approval as well as for risk analysis in the field of transport of radioactive materials. The behaviour of the impact limiter is influenced by a number of parameters like impact limiter construction, material properties and loading conditions. Uncertainties exist for the application of simplified numerical tools for calculations of impact limiting devices. Uncertainities exist when applying simplified numerical tools. A model describing the compression of wood in axial direction of wood under large deformations for simulation with complex numerical procedures like dynamic Finite Element Methods has not been developed yet. Therefore this thesis concentrates on deriving a physical model for the behaviour of wood and analysing the applicability of different modeling techniques. A model describing the compression of wood in axial direction under large deformations was developed on the basis of an analysis of impact limiter of prototypes of casks for radioactive materials after a 9-m-drop-test and impact tests with wooden specimens. The model describes the softening, which wood under large deformation exhibits, as a function of the lateral strain constraint. The larger the lateral strain restriction, the more energy wood can absorb. The energy absorption capacity of impact limiter depends therefore on the ability of the outer steel sheet structure to prevent wood from evading from the main

  4. Monetary valorization of the sanitary and environmental impacts of a nuclear accident: synthesis of ''ExternE'' studies, interests and limits of complementary developments

    International Nuclear Information System (INIS)

    Schieber, C.; Schneider, Th.

    2002-09-01

    This document constitutes a synthesis of the various available methods for the monetary evaluation of the nuclear accidents impacts in order to reveal the already evaluated impacts, those which need complementary developments and those for which the monetary approach currently seems to come up against limits. It is based primarily on the approach realized by the ''ExternE'' project of the European Commission, consisting in the evaluation of the external costs of the nuclear energy industry. (A.L.B.)

  5. Environmental impact assessment procedure: A new approach based on fuzzy logic

    International Nuclear Information System (INIS)

    Peche, Roberto; Rodriguez, Esther

    2009-01-01

    The information related to the different environmental impacts produced by the execution of activities and projects is often limited, described by semantic variables and, affected by a high degree of inaccuracy and uncertainty, thereby making fuzzy logic a suitable tool with which to express and treat this information. The present study proposes a new approach based on fuzzy logic to carry out the environmental impact assessment (EIA) of these activities and projects. Firstly, a set of impact properties is stated and two nondimensional parameters - ranging from 0 to 100 -are assigned, (p i ) to assess the value of the property and (v i ) to assess its contribution to each environmental impact. Next, the impact properties are described by means of fuzzy numbers p i - using generalised confidence intervals. Then, a procedure based on fuzzy arithmetic is developed to define the assessment functions v-bar = f(p-bar) - conventional mathematical functions, which incorporate the knowledge of these impact properties and give the fuzzy values v i - corresponding to each p i - . Subsequently, the fuzzy value of each environmental impact V-bar is estimated by aggregation of the values v i - , in order to obtain the total positive and negative environmental impacts V +- and V -- and, later - from them - the total environmental impact of the activity or project TV - . Finally, the defuzzyfication of TV - leads to a punctual impact estimator TV (1) - a conventional EI estimation - and its corresponding uncertainty interval estimator {(δ l (TV - ),δ r (TV - )}, which represent the total value of the environmental impact caused by the execution of the considered activity or project.

  6. Development of a impact limiter for radioactive material transport packages - characterization of the polymeric material used

    International Nuclear Information System (INIS)

    Mourao, Rogerio Pimenta; Mattar Neto, Miguel

    2000-01-01

    Impact limiters are sacrificial components widely used to protect radioactive waste packages against damages arising from falls, fires and collisions with protruding objects. Several materials have been used as impact limiter filling: wood, aluminum honeycomb, and metallic or polymeric foams. Besides, hollow structures are also used as shock absorbers, either as a single shell or as a tube array. One of the most popular materials among package designers is rigid polyurethane foam, owing to its toughness, workability, low specific weight, low costs and commercial availability. In Brazil, a foam developed using the polymer extracted from the castor oil plant (Ricinus communis) is being studied as a potential impact limiter filling. For a better performance of this material, it is necessary to minimize the impact limiter dimensions without compromising the package safety. For this, a detailed knowledge of the foam physical and mechanical properties is essential. A relatively vast amount of data about regular polymeric foams can be found in the literature and in foreign manufacturers brochures, but no data has been published about the properties of the castor oil foam. This paper presents data gathered in an ongoing research program aiming at the development of a Type-B packaging. Foam samples were submitted to uniaxial static compression tests and to hydrostatic tests. The results obtained reveal that the castor oil foam has a mechanical behavior similar to that of regular foams, with good property reproducibility and homogeneity. (author)

  7. Solar-based groundwater pumping for irrigation: Sustainability, policies, and limitations

    International Nuclear Information System (INIS)

    Closas, Alvar; Rap, Edwin

    2017-01-01

    The increasing demand for solar-powered irrigation systems in agriculture has spurred a race for projects as it potentially offers a cost-effective and sustainable energy solution to off-grid farmers while helping food production and sustaining livelihoods. As a result, countries such as Morocco and Yemen have been promoting this technology for farmers and national plans with variable finance and subsidy schemes like in India have been put forward. By focusing on the application of solar photovoltaic (PV) pumping systems in groundwater-fed agriculture, this paper highlights the need to further study the impacts, opportunities and limitations of this technology within the Water-Energy-Food (WEF) nexus. It shows how most policies and projects promoting solar-based groundwater pumping for irrigation through subsidies and other incentives overlook the real financial and economic costs of this solution as well as the availability of water resources and the potential negative impacts on the environment caused by groundwater over-abstraction. There is a need to monitor groundwater abstraction, targeting subsidies and improving the knowledge and monitoring of resource use. Failing to address these issues could lead to further groundwater depletion, which could threaten the sustainability of this technology and dependent livelihoods in the future. - Highlights: • Solar pumping projects require assessing environmental and financial sustainability. • Subsidies for solar pumping need to be tied to groundwater pumping regulations. • Solar irrigation projects need to consider groundwater availability and depletion. • Data and monitoring are needed to improve water resource impact assessments.

  8. Impact on geologic repository usage from limited actinide recycle in pressurized light water reactors

    International Nuclear Information System (INIS)

    Wigeland, Roald A.; Bauer, Theodore H.; Hill, Robert N.; Stillman, John A.

    2007-01-01

    A project has been conducted as part of the U.S. Department of Energy Advanced Fuel Cycle Initiative to evaluate the impact of limited actinide recycling in light water reactors on the utilization of a geologic repository where loading of the repository is constrained by the decay heat of the emplaced materials. In this study, it was assumed that spent PWR fuel was processed, removing the uranium, plutonium, americium, and neptunium, along with the fission products cesium and strontium. Previous work had demonstrated that these elements were responsible for limiting loading in the repository based on thermal constraints. The plutonium, americium, and neptunium were recycled in a PWR, with process waste and spent recycled fuel being sent to the repository. The cesium and strontium were placed in separate storage for 100-300 years to allow for decay prior to disposal. The study examined the effect of single and multiple recycles of the recovered plutonium, americium, and neptunium, as well as different processing delay times. The potential benefit to the repository was measured by the increase in utilization of repository space as indicated by the allowable linear loading in the repository drifts (tunnels). The results showed that limited recycling would provide only a small fraction of the benefit that could be achieved with repeated processing and recycling, as is possible in fast neutron reactors. (author)

  9. Increasing the public health impact of evidence-based interventions in behavioral medicine: new approaches and future directions.

    Science.gov (United States)

    Buscemi, Joanna; Janke, E Amy; Kugler, Kari C; Duffecy, Jenna; Mielenz, Thelma J; St George, Sara M; Sheinfeld Gorin, Sherri N

    2017-02-01

    The dissemination and implementation of evidence-based behavioral medicine interventions into real world practice has been limited. The purpose of this paper is to discuss specific limitations of current behavioral medicine research within the context of the RE-AIM framework, and potential opportunities to increase public health impact by applying novel intervention designs and data collection approaches. The MOST framework has recently emerged as an alternative approach to development and evaluation that aims to optimize multicomponent behavioral and bio-behavioral interventions. SMART designs, imbedded within the MOST framework, are an approach to optimize adaptive interventions. In addition to innovative design strategies, novel data collection approaches that have the potential to improve the public-health dissemination include mHealth approaches and considering environment as a potential data source. Finally, becoming involved in advocacy via policy related work may help to improve the impact of evidence-based behavioral interventions. Innovative methods, if increasingly implemented, may have the ability to increase the public health impact of evidence-based behavioral interventions to prevent disease.

  10. Independence of nutrient limitation and carbon dioxide impacts on the Southern Ocean coccolithophore Emiliania huxleyi.

    Science.gov (United States)

    Müller, Marius N; Trull, Thomas W; Hallegraeff, Gustaaf M

    2017-08-01

    Future oceanic conditions induced by anthropogenic greenhouse gas emissions include warming, acidification and reduced nutrient supply due to increased stratification. Some parts of the Southern Ocean are expected to show rapid changes, especially for carbonate mineral saturation. Here we compare the physiological response of the model coccolithophore Emiliania huxleyi (strain EHSO 5.14, originating from 50 o S, 149 o E) with pH/CO 2 gradients (mimicking ocean acidification ranging from 1 to 4 × current pCO 2 levels) under nutrient-limited (nitrogen and phosphorus) and -replete conditions. Both nutrient limitations decreased per cell photosynthesis (particulate organic carbon (POC) production) and calcification (particulate inorganic carbon (PIC) production) rates for all pCO 2 levels, with more than 50% reductions under nitrogen limitation. These impacts, however, became indistinguishable from nutrient-replete conditions when normalized to cell volume. Calcification decreased three-fold and linearly with increasing pCO 2 under all nutrient conditions, and was accompanied by a smaller ~30% nonlinear reduction in POC production, manifested mainly above 3 × current pCO 2 . Our results suggest that normalization to cell volume allows the major impacts of nutrient limitation (changed cell sizes and reduced PIC and POC production rates) to be treated independently of the major impacts of increasing pCO 2 and, additionally, stresses the importance of including cell volume measurements to the toolbox of standard physiological analysis of coccolithophores in field and laboratory studies.

  11. A local isotropic/global orthotropic finite element technique for modeling the crush of wood in impact limiters

    International Nuclear Information System (INIS)

    Attaway, S.W.; Yoshimura, H.R.

    1989-01-01

    Wood is often used as the energy absorbing material in impact limiters, because it begins to crush at low strains, then maintains a near constant crush stress up to nearly 60% volume reduction, and then locks up. Hill (Hill and Joseph, 1974) has performed tests that show that wood is an excellent absorber. However, wood's orthotropic behavior for large crush is difficult to model. In the past, analysts have used isotropic foam-like material models for modeling wood. A new finite element technique is presented in this paper that gives a better model of wood crush than the model currently in use. The orthotropic technique is based on locally isotropic, but globally orthotropic (LIGO) (Attaway, 1988) assumptions in which alternating layers of hard and soft crushable material are used. Each layer is isotropic; however, by alternating hard and soft thin layers, the resulting global behavior is orthotropic. In the remainder of this paper, the new technique for modeling orthotropic wood crush will be presented. The model is used to predict the crush behavior for different grain orientations of balsa wood. As an example problem, an impact limiter containing balsa wood as the crushable material is analyzed using both an isotropic model and the LIGO model

  12. Know your limits? Climate extremes impact the range of Scots pine in unexpected places.

    Science.gov (United States)

    Julio Camarero, J; Gazol, Antonio; Sancho-Benages, Santiago; Sangüesa-Barreda, Gabriel

    2015-11-01

    Although extreme climatic events such as drought are known to modify forest dynamics by triggering tree dieback, the impact of extreme cold events, especially at the low-latitude margin ('rear edge') of species distributional ranges, has received little attention. The aim of this study was to examine the impact of one such extreme cold event on a population of Scots pine (Pinus sylvestris) along the species' European southern rear-edge range limit and to determine how such events can be incorporated into species distribution models (SDMs). A combination of dendrochronology and field observation was used to quantify how an extreme cold event in 2001 in eastern Spain affected growth, needle loss and mortality of Scots pine. Long-term European climatic data sets were used to contextualize the severity of the 2001 event, and an SDM for Scots pine in Europe was used to predict climatic range limits. The 2001 winter reached record minimum temperatures (equivalent to the maximum European-wide diurnal ranges) and, for trees already stressed by a preceding dry summer and autumn, this caused dieback and large-scale mortality. Needle loss and mortality were particularly evident in south-facing sites, where post-event recovery was greatly reduced. The SDM predicted European Scots pine distribution mainly on the basis of responses to maximum and minimum monthly temperatures, but in comparison with this the observed effects of the 2001 cold event at the southerly edge of the range limit were unforeseen. The results suggest that in order to better forecast how anthropogenic climate change might affect future forest distributions, distribution modelling techniques such as SDMs must incorporate climatic extremes. For Scots pine, this study shows that the effects of cold extremes should be included across the entire distribution margin, including the southern 'rear edge', in order to avoid biased predictions based solely on warmer climatic scenarios. © The Author 2015. Published by

  13. Determining perception-based impacts of noxious facilities on wage rates and property values

    Energy Technology Data Exchange (ETDEWEB)

    Nieves, L.A.; Clark, D.E.

    1992-02-01

    This document, written for the US Department of Energy, discusses current information and the need for future research on estimating the impacts on wages and property values that could result from people's perceptions of the risks associated with noxious facilities. Psychometric studies indicate that the US population is averse to living near noxious facilities, nuclear-related facilities in particular. Contingent valuation and hedonic studies find that the net economic impacts of proximity to noxious facilities are generally negative and often substantial. Most of these studies are limited in scope, and none estimate the impacts derived from public perceptions of such facilities. This study examines the mechanisms by which negative public perceptions result in economic impacts reflected in wages and property values. On the basis of these mechanisms, it develops a predictive model of perception-based impacts and identifies the data and methods needed to implement it. The key to predicting perception-based impacts lies in combining psychometric and hedonic methods. The reliability of psychometric measures as indicators of aversive stimuli that precipitate economic impacts can be empirically tested. To test the robustness of the findings, alternative estimation methods an be employed in the hedonic analysis. Contingent valuation methods can confirm the results.

  14. Determining perception-based impacts of noxious facilities on wage rates and property values

    Energy Technology Data Exchange (ETDEWEB)

    Nieves, L.A.; Clark, D.E.

    1992-02-01

    This document, written for the US Department of Energy, discusses current information and the need for future research on estimating the impacts on wages and property values that could result from people`s perceptions of the risks associated with noxious facilities. Psychometric studies indicate that the US population is averse to living near noxious facilities, nuclear-related facilities in particular. Contingent valuation and hedonic studies find that the net economic impacts of proximity to noxious facilities are generally negative and often substantial. Most of these studies are limited in scope, and none estimate the impacts derived from public perceptions of such facilities. This study examines the mechanisms by which negative public perceptions result in economic impacts reflected in wages and property values. On the basis of these mechanisms, it develops a predictive model of perception-based impacts and identifies the data and methods needed to implement it. The key to predicting perception-based impacts lies in combining psychometric and hedonic methods. The reliability of psychometric measures as indicators of aversive stimuli that precipitate economic impacts can be empirically tested. To test the robustness of the findings, alternative estimation methods an be employed in the hedonic analysis. Contingent valuation methods can confirm the results.

  15. Evaluation of impact limiter performance during end-on and slapdown drop tests of a one-third scale model storage/transport cask system

    International Nuclear Information System (INIS)

    Yoshimura, H.R.; Bronowski, D.R.; Uncapher, W.L.; Attaway, S.W.; Bateman, V.I.; Carne, T.G.; Gregory, D.L.; Huerta, M.

    1990-12-01

    This report describes drop testing of a one-third scale model shipping cask system. Two casks were designed and fabricated by Transnuclear, Inc., to ship spent fuel from the former Nuclear Fuel Services West Valley reprocessing facility in New York to the Idaho National Engineering Laboratory for a long-term spent fuel dry storage demonstration project. As part of the NRC's regulatory certification process, one-third scale model tests were performed to obtain experimental data on impact limiter performance during impact testing. The objectives of the testing program were to (1) obtain deceleration and displacement information for the cask and impact limiter system, (2) obtain dynamic force-displacement data for the impact limiters, (3) verify the integrity of the impact limiter retention system, and (4) examine the crush behavior of the limiters. Two 30-ft (9-m) drop tests were conducted on a mass model of the cask body and scaled balsa and redwood-filled impact limiters. This report describes the results of both tests in terms of measured decelerations, posttest deformation measurements, and the general structural response of the system. 3 refs., 32 figs

  16. Assessment of the benefits and impacts in the U.S. Nuclear Power Industry of hypothesized lower occupational dose limits

    Energy Technology Data Exchange (ETDEWEB)

    Andersen, R.L.; Schmitt, J.F. [Nuclear Energy Institute, Washington, DC (United States)

    1995-03-01

    The International Commission on Radiological Protection and the National Council on Radiation Protection and Measurements have issued recommendations that would limit occupational exposure of individuals to doses lower than regulatory limits contained in the Nuclear Regulatory Commission`s 10 CFR Part 20, {open_quotes}Standards for Protection Against Radiation{close_quotes}. Because of this situation, there is interest in the potential benefits and impacts that would be associated with movement of the NRC regulatory limits toward the advisory bodies recommendations. The records of occupational worker doses in the U.S. commercial nuclear power industry show that the vast majority of these workers have doses that are significantly below the regulatory limit of 50 mSv (5 rem) per year. Some workers doses do approach the limits, however. This is most common in the case of specially skilled workers, especially those with skills utilized in support of plant outage work. Any consideration of the potential benefits and impacts of hypothesized lower dose limits must address these workers as an important input to the overall assessment. There are also, of course, many other areas in which the benefits and impacts must be evaluated. To prepare to provide valid, constructive input on this matter, the U.S. nuclear power industry is undertaking an assessment, facilitated by the Nuclear Energy Institute (NEI), of the potential benefits and impacts at its facilities associated with hypothesized lower occupational dose limits. Some preliminary results available to date from this assessment are provided.

  17. Assessment of the benefits and impacts in the U.S. Nuclear Power Industry of hypothesized lower occupational dose limits

    International Nuclear Information System (INIS)

    Andersen, R.L.; Schmitt, J.F.

    1995-01-01

    The International Commission on Radiological Protection and the National Council on Radiation Protection and Measurements have issued recommendations that would limit occupational exposure of individuals to doses lower than regulatory limits contained in the Nuclear Regulatory Commission's 10 CFR Part 20, open-quotes Standards for Protection Against Radiationclose quotes. Because of this situation, there is interest in the potential benefits and impacts that would be associated with movement of the NRC regulatory limits toward the advisory bodies recommendations. The records of occupational worker doses in the U.S. commercial nuclear power industry show that the vast majority of these workers have doses that are significantly below the regulatory limit of 50 mSv (5 rem) per year. Some workers doses do approach the limits, however. This is most common in the case of specially skilled workers, especially those with skills utilized in support of plant outage work. Any consideration of the potential benefits and impacts of hypothesized lower dose limits must address these workers as an important input to the overall assessment. There are also, of course, many other areas in which the benefits and impacts must be evaluated. To prepare to provide valid, constructive input on this matter, the U.S. nuclear power industry is undertaking an assessment, facilitated by the Nuclear Energy Institute (NEI), of the potential benefits and impacts at its facilities associated with hypothesized lower occupational dose limits. Some preliminary results available to date from this assessment are provided

  18. The Impact of Mutual Recognition: Inbuilt Limits and Domestic Responses to the Single Market

    OpenAIRE

    Schmidt, S.

    2002-01-01

    What have been the consequences of integrating the single market via mutual recognition? Did competitive deregulation result? Or were its implications less significant than expected? In this paper I analyse two previously highly regulated service sectors, insurance and road haulage, and study the impact of European policies in Germany and France. I find that the Council instituted mutual recognition in a restrictive way. This limits its impact on member states, which is moreover mediated by n...

  19. Limit loads for pipe bends under combined pressure and in-plane bending based on finite element limit analysis

    International Nuclear Information System (INIS)

    Oh, Chang Sik; Kim, Yun Jae

    2006-01-01

    In the present paper, approximate plastic limit load solutions for pipe bends under combined internal pressure and bending are obtained from detailed three-dimensional (3-D) FE limit analyses based on elastic-perfectly plastic materials with the small geometry change option. The present FE results show that existing limit load solutions for pipe bends are lower bounds but can be very different from the present FE results in some cases, particularly for bending. Accordingly closed-form approximations are proposed for pipe bends under combined pressure and in-plane bending based on the present FE results. The proposed limit load solutions would be a basis of defective pipe bends and be useful to estimate non-linear fracture mechanics parameters based on the reference stress approach

  20. Habit-based Asset Pricing with Limited Participation Consumption

    DEFF Research Database (Denmark)

    Bach, Christian; Møller, Stig Vinther

    We calibrate and estimate a consumption-based asset pricing model with habit formation using limited participation consumption data. Based on survey data of a representative sample of American households, we distinguish between assetholder and non-assetholder consumption, as well as the standard...

  1. Habit-based asset pricing with limited participation consumption

    DEFF Research Database (Denmark)

    Møller, Stig Vinther; Bach, Christian

    2011-01-01

    We calibrate and estimate a consumption-based asset pricing model with habit formation using limited participation consumption data. Based on survey data of a representative sample of American households, we distinguish between assetholder and non-assetholder consumption, as well as the standard...

  2. Bipolar-power-transistor-based limiter for high frequency ultrasound imaging systems.

    Science.gov (United States)

    Choi, Hojong; Yang, Hao-Chung; Shung, K Kirk

    2014-03-01

    High performance limiters are described in this paper for applications in high frequency ultrasound imaging systems. Limiters protect the ultrasound receiver from the high voltage (HV) spikes produced by the transmitter. We present a new bipolar power transistor (BPT) configuration and compare its design and performance to a diode limiter used in traditional ultrasound research and one commercially available limiter. Limiter performance depends greatly on the insertion loss (IL), total harmonic distortion (THD) and response time (RT), each of which will be evaluated in all the limiters. The results indicated that, compared with commercial limiter, BPT-based limiter had less IL (-7.7 dB), THD (-74.6 dB) and lower RT (43 ns) at 100 MHz. To evaluate the capability of these limiters, they were connected to a 100 MHz single element transducer and a two-way pulse-echo test was performed. It was found that the -6 dB bandwidth and sensitivity of the transducer using BPT-based limiter were better than those of the commercial limiter by 22% and 140%, respectively. Compared to the commercial limiter, BPT-based limiter is shown to be capable of minimizing signal attenuation, RT and THD at high frequencies and is thus suited for high frequency ultrasound applications. Copyright © 2013 Elsevier B.V. All rights reserved.

  3. The Limited Impact of Exposure Duration on Holistic Word Processing.

    Science.gov (United States)

    Chen, Changming; Abbasi, Najam Ul Hasan; Song, Shuang; Chen, Jie; Li, Hong

    2016-01-01

    The current study explored the impact of stimuli exposure duration on holistic word processing measured by the complete composite paradigm (CPc paradigm). The participants were asked to match the cued target parts of two characters which were presented for either a long (600 ms) or a short duration (170 ms). They were also tested by two popular versions of the CPc paradigm: the "early-fixed" task where the attention cue was visible from the beginning of each trial at a fixed position, and the "delayed-random" task where the cue showed up after the study character at random locations. The holistic word effect, as indexed by the alignment × congruency interaction, was identified in both tasks and was unaffected by the stimuli duration in both tasks. Meanwhile, the "delayed-random" task did not bring about larger holistic word effect than the "early-fixed" task. These results suggest the exposure duration (from around 150 to 600 ms) has a limited impact on the holistic word effect, and have methodological implications for experiment designs in this field.

  4. The impact of teachers' limited english proficiency on english second language learners in South African schools

    Directory of Open Access Journals (Sweden)

    Norma Nel

    2010-01-01

    Full Text Available The importance of the role of language in teacher education programmes and in children's learning is crucial. This study focuses on the use of English as the language of learning and teaching and its impact on the language development of English second language (ESL student teachers and ESL learners. Against the background of major theories in second language (L2 acquisition and learning, this topic is contextualized within the South African education system. An empirical inquiry was carried out in which portfolios (evidence of practical teaching including lesson plans and learners' work submitted by final year student teachers enrolled at a large distance teaching university for the Advanced Certificate in Education: Inclusive Education were scrutinised. A comparison of teacher and learner written errors was made. Based on the findings, a questionnaire was designed to determine the extent of the impact of teachers' limited English proficiency on learners' English proficiency. The findings of the questionnaire responses are presented. Recommendations are made on how student teachers can improve their teaching practice to ensure quality ESL teacher input and ESL learner performance.

  5. German Energiewende and the heating market – Impact and limits of policy

    International Nuclear Information System (INIS)

    Bauermann, Klaas

    2016-01-01

    The German Energiewende envisages achieving a climate-neutral building stock in 2050 by means of two major pillars of regulation. First, residential buildings should consume 80% less primary energy and second; the remaining energy demand should be covered primarily with renewables. This paper simulates the future German heating market under different policy scenarios in order to evaluate the impact and limits of recent and conceivable policies. The investigation is based upon a dual model approach, linking a residential heating model to a discrete choice model. The major finding is that current regulations are not suitable for the achievement of governmental targets. Scenario calculations show that additional carbon emission reductions, triggered by the current regulatory regime, are falling short of expectations. In terms of economic efficiency, all calculated policy alternatives outperform the regulation currently in place. This allows to draw the conclusion that carbon emission reductions can be achieved without a major increase in cost. The model results highlight two policy implications. First, a rising mandatory share of renewables in the heating market is needed for target achievement and can be cost effectively. Second, renewable obligations for heating systems must include the existing building stock to achieve the postulated political targets. - Highlights: •The residential heating market accounts for major share of carbon emissions. •The disregard of the building stock weakens the impact of recent regulation. •Current regulation preserves a heating market dominated by fossil fuels. •A significant renewable share can be achieved through direct regulation. •Alternative policy leads to emission reductions without major increases in costs.

  6. Impact-based earthquake alerts with the U.S. Geological Survey's PAGER system: what's next?

    Science.gov (United States)

    Wald, D.J.; Jaiswal, K.S.; Marano, K.D.; Garcia, D.; So, E.; Hearne, M.

    2012-01-01

    In September 2010, the USGS began publicly releasing earthquake alerts for significant earthquakes around the globe based on estimates of potential casualties and economic losses with its Prompt Assessment of Global Earthquakes for Response (PAGER) system. These estimates significantly enhanced the utility of the USGS PAGER system which had been, since 2006, providing estimated population exposures to specific shaking intensities. Quantifying earthquake impacts and communicating estimated losses (and their uncertainties) to the public, the media, humanitarian, and response communities required a new protocol—necessitating the development of an Earthquake Impact Scale—described herein and now deployed with the PAGER system. After two years of PAGER-based impact alerting, we now review operations, hazard calculations, loss models, alerting protocols, and our success rate for recent (2010-2011) events. This review prompts analyses of the strengths, limitations, opportunities, and pressures, allowing clearer definition of future research and development priorities for the PAGER system.

  7. Bioenergy production and sustainable development: science base for policymaking remains limited.

    Science.gov (United States)

    Robledo-Abad, Carmenza; Althaus, Hans-Jörg; Berndes, Göran; Bolwig, Simon; Corbera, Esteve; Creutzig, Felix; Garcia-Ulloa, John; Geddes, Anna; Gregg, Jay S; Haberl, Helmut; Hanger, Susanne; Harper, Richard J; Hunsberger, Carol; Larsen, Rasmus K; Lauk, Christian; Leitner, Stefan; Lilliestam, Johan; Lotze-Campen, Hermann; Muys, Bart; Nordborg, Maria; Ölund, Maria; Orlowsky, Boris; Popp, Alexander; Portugal-Pereira, Joana; Reinhard, Jürgen; Scheiffle, Lena; Smith, Pete

    2017-03-01

    The possibility of using bioenergy as a climate change mitigation measure has sparked a discussion of whether and how bioenergy production contributes to sustainable development. We undertook a systematic review of the scientific literature to illuminate this relationship and found a limited scientific basis for policymaking. Our results indicate that knowledge on the sustainable development impacts of bioenergy production is concentrated in a few well-studied countries, focuses on environmental and economic impacts, and mostly relates to dedicated agricultural biomass plantations. The scope and methodological approaches in studies differ widely and only a small share of the studies sufficiently reports on context and/or baseline conditions, which makes it difficult to get a general understanding of the attribution of impacts. Nevertheless, we identified regional patterns of positive or negative impacts for all categories - environmental, economic, institutional, social and technological. In general, economic and technological impacts were more frequently reported as positive, while social and environmental impacts were more frequently reported as negative (with the exception of impacts on direct substitution of GHG emission from fossil fuel). More focused and transparent research is needed to validate these patterns and develop a strong science underpinning for establishing policies and governance agreements that prevent/mitigate negative and promote positive impacts from bioenergy production.

  8. Regional Investment Policy Under The Impact Of Budget Limitations And Economic Sanctions

    OpenAIRE

    Avramenko, Yelena S.; Vlasov, Semyon V.; Lukyanov, Sergey A.; Temkina, Irina M.

    2018-01-01

    This article presents the results of research on the impact which budget limitations and economic sanctions have had on regional investment policy External sanctions and sluggish economic growth have affected the social and economic development of the region. Relying on the results of comparative and statistical analysis, the article demonstrates the need for altering the focus of current investment policy from quantitative growth to qualitative enhancement. The article analyses a new trend i...

  9. Upper limits for air humidity based on human comfort

    DEFF Research Database (Denmark)

    Toftum, Jørn; Fanger, Povl Ole; Jørgensen, Anette S.

    1998-01-01

    respiratory cooling. Human subjects perceived the condition of their skin to be less acceptable with increasing skin humidity. Inhaled air was rated warmer, more stuffy and less acceptable with increasing air humidity and temperature. Based on the subjects' comfort responses, new upper limits for air humidity......The purpose of this study was to verify the hypothesis that insufficient respiratory cooling and a high level of skin humidity are two reasons for thermal discomfort at high air humidities, and to prescribe upper limits for humidity based on discomfort due to elevated skin humidity and insufficient...

  10. Limits on the Efficiency of Event-Based Algorithms for Monte Carlo Neutron Transport

    Energy Technology Data Exchange (ETDEWEB)

    Romano, Paul K.; Siegel, Andrew R.

    2017-04-16

    The traditional form of parallelism in Monte Carlo particle transport simulations, wherein each individual particle history is considered a unit of work, does not lend itself well to data-level parallelism. Event-based algorithms, which were originally used for simulations on vector processors, may offer a path toward better utilizing data-level parallelism in modern computer architectures. In this study, a simple model is developed for estimating the efficiency of the event-based particle transport algorithm under two sets of assumptions. Data collected from simulations of four reactor problems using OpenMC was then used in conjunction with the models to calculate the speedup due to vectorization as a function of two parameters: the size of the particle bank and the vector width. When each event type is assumed to have constant execution time, the achievable speedup is directly related to the particle bank size. We observed that the bank size generally needs to be at least 20 times greater than vector size in order to achieve vector efficiency greater than 90%. When the execution times for events are allowed to vary, however, the vector speedup is also limited by differences in execution time for events being carried out in a single event-iteration. For some problems, this implies that vector effciencies over 50% may not be attainable. While there are many factors impacting performance of an event-based algorithm that are not captured by our model, it nevertheless provides insights into factors that may be limiting in a real implementation.

  11. Ballistic Limit of High-Strength Steel and Al7075-T6 Multi-Layered Plates Under 7.62-mm Armour Piercing Projectile Impact

    OpenAIRE

    Rahman, N. A.; Abdullah, S.; Zamri, W. F. H.; Abdullah, M. F.; Omar, M. Z.; Sajuri, Z.

    2016-01-01

    Abstract This paper presents the computational-based ballistic limit of laminated metal panels comprised of high strength steel and aluminium alloy Al7075-T6 plate at different thickness combinations to necessitate the weight reduction of existing armour steel plate. The numerical models of monolithic configuration, double-layered configuration and triple-layered configuration were developed using a commercial explicit finite element code and were impacted by 7.62 mm armour piercing projectil...

  12. Are Price Limits Effective? An Examination of an Artificial Stock Market.

    Science.gov (United States)

    Zhang, Xiaotao; Ping, Jing; Zhu, Tao; Li, Yuelei; Xiong, Xiong

    2016-01-01

    We investigated the inter-day effects of price limits policies that are employed in agent-based simulations. To isolate the impact of price limits from the impact of other factors, we built an artificial stock market with higher frequency price limits hitting. The trading mechanisms in this market are the same as the trading mechanisms in China's stock market. Then, we designed a series of simulations with and without price limits policy. The results of these simulations demonstrate that both upper and lower price limits can cause a volatility spillover effect and a trading interference effect. The process of price discovery will be delayed if upper price limits are imposed on a stock market; however, this phenomenon does not occur when lower price limits are imposed.

  13. GIS based procedure of cumulative environmental impact assessment.

    Science.gov (United States)

    Balakrishna Reddy, M; Blah, Baiantimon

    2009-07-01

    Scale and spatial limits of impact assessment study in a GIS platform are two very important factors that could have a bearing on the genuineness and quality of impact assessment. While effect of scale has been documented and well understood, no significant study has been carried out on spatial considerations in an impact assessment study employing GIS technique. A novel technique of impact assessment demonstrable through GIS approach termed hereby as 'spatial data integrated GIS impact assessment method (SGIAM)' is narrated in this paper. The technique makes a fundamental presumption that the importance of environmental impacts is dependent, among other things, on spatial distribution of the effects of the proposed action and of the affected receptors in a study area. For each environmental component considered (e.g., air quality), impact indices are calculated through aggregation of impact indicators which are measures of the severity of the impact. The presence and spread of environmental descriptors are suitably quantified through modeling techniques and depicted. The environmental impact index is calculated from data exported from ArcINFO, thus giving significant importance to spatial data in the impact assessment exercise.

  14. COMPETENCY-BASED TRAINING IN NURSING: LIMITS AND POSSIBILITIES

    Directory of Open Access Journals (Sweden)

    Silvia Franco da Rocha Tonhom

    2014-12-01

    Full Text Available Objective To analyze the possibilities and limits of competency-based training in nursing. Method An integrative review of the literature on the subject was carried out, and an analysis was made of the results of a survey evaluating a nursing course based on areas of competency. A dialog was then established between the review and the results of the research. Results On the question of which theoretical type of competency the articles from the literature relate to, there is a predominance of the constructivist perspective, followed by the functionalist approach and the dialog-based approach. In the dialog between the literature and the research, limits and possibilities were observed in the development of a training by areas of competency. Conclusion The dialog-based approach to competency is the proposition that most approximates to the profile defined by the National Curriculum Guidelines for training in nursing, and this was also identified in the evaluation survey that was studied. However, it is found that there are aspects on better work is needed, such as: partnership between school and the workplace, the role of the teacher, the role of the student, and the process of evaluation.

  15. Self-organizing maps based on limit cycle attractors.

    Science.gov (United States)

    Huang, Di-Wei; Gentili, Rodolphe J; Reggia, James A

    2015-03-01

    Recent efforts to develop large-scale brain and neurocognitive architectures have paid relatively little attention to the use of self-organizing maps (SOMs). Part of the reason for this is that most conventional SOMs use a static encoding representation: each input pattern or sequence is effectively represented as a fixed point activation pattern in the map layer, something that is inconsistent with the rhythmic oscillatory activity observed in the brain. Here we develop and study an alternative encoding scheme that instead uses sparsely-coded limit cycles to represent external input patterns/sequences. We establish conditions under which learned limit cycle representations arise reliably and dominate the dynamics in a SOM. These limit cycles tend to be relatively unique for different inputs, robust to perturbations, and fairly insensitive to timing. In spite of the continually changing activity in the map layer when a limit cycle representation is used, map formation continues to occur reliably. In a two-SOM architecture where each SOM represents a different sensory modality, we also show that after learning, limit cycles in one SOM can correctly evoke corresponding limit cycles in the other, and thus there is the potential for multi-SOM systems using limit cycles to work effectively as hetero-associative memories. While the results presented here are only first steps, they establish the viability of SOM models based on limit cycle activity patterns, and suggest that such models merit further study. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Quality assurance of nuclear analytical techniques based on Bayesian characteristic limits

    International Nuclear Information System (INIS)

    Michel, R.

    2000-01-01

    Based on Bayesian statistics, characteristic limits such as decision threshold, detection limit and confidence limits can be calculated taking into account all sources of experimental uncertainties. This approach separates the complete evaluation of a measurement according to the ISO Guide to the Expression of Uncertainty in Measurement from the determination of the characteristic limits. Using the principle of maximum entropy the characteristic limits are determined from the complete standard uncertainty of the measurand. (author)

  17. Assessing the hydrological impacts of Tropical Cyclones on the Carolinas: An observational and modeling based investigation

    Science.gov (United States)

    Leeper, R. D.; Prat, O. P.; Blanton, B. O.

    2012-12-01

    During the warm season, the Carolinas are particularly prone to tropical cyclone (TC) activity and can be impacted in many different ways depending on storm track. The coasts of the Carolinas are the most vulnerable areas, but particular situations (Frances and Ivan 2004) affected communities far from the coasts (Prat and Nelson 2012). Regardless of where landfall occurs, TCs are often associated with intense precipitation and strong winds triggering a variety of natural hazards (storm surge, flooding, landslides). The assessment of societal and environmental impacts of TCs requires a suite of observations. The scarcity of station coverage, sensor limitations, and rainfall retrieval uncertainties are issues limiting the ability to assess accurately the impact of extreme precipitation events. Therefore, numerical models, such as the Weather Research and Forecasting model (WRF), can be valuable tools to investigate those impacts at regional and local scales and bridge the gap between observations. The goal of this study is to investigate the impact of TCs across the Carolinas using both observational and modeling technologies, and explore the usefulness of numerical methods in data-scarce regions. To fully assess TC impacts on the Carolinas inhabitants, storms impacting both coastal and inner communities will be selected and high-resolution WRF ensemble simulations generated from a suite of physic schemes for each TC to investigate their impact at finer scales. The ensemble member performance will be evaluated with respect to ground-based and satellite observations. Furthermore, results from the high-resolution WRF simulations, including the average wind-speed and the sea level pressure, will be used with the ADCIRC storm-surge and wave-model (Westerink et al, 2008) to simulate storm surge and waves along the Carolinas coast for TCs travelling along the coast or making landfall. This work aims to provide an assessment of the various types of impacts TCs can have

  18. Impact of Bilingual Education Programs on Limited English Proficient Students and Their Peers

    DEFF Research Database (Denmark)

    Daysal, N. Meltem; Chin, Aimee; Imberman, Scott

    2013-01-01

    bilingual education above this 20-student cutoff. Using this discontinuity as an instrument for district bilingual education provision, we find that providing bilingual education programs (relative to providing only English as a Second Language programs) does not significantly impact the standardized test...... scores of students with Spanish as their home language (comprised primarily of ever-LEP students). However, we find significant positive impacts on non-LEP students’ achievement, which indicates that education programs for LEP students have spillover effects to non-LEP students.......Texas requires a school district to offer bilingual education when its enrollment of limited English proficient (LEP) students in a particular elementary grade and language is twenty or higher. Using school panel data, we find a significant increase in the probability that a district provides...

  19. Limiting the impact of light pollution on human health, environment and stellar visibility.

    Science.gov (United States)

    Falchi, Fabio; Cinzano, Pierantonio; Elvidge, Christopher D; Keith, David M; Haim, Abraham

    2011-10-01

    Light pollution is one of the most rapidly increasing types of environmental degradation. Its levels have been growing exponentially over the natural nocturnal lighting levels provided by starlight and moonlight. To limit this pollution several effective practices have been defined: the use of shielding on lighting fixture to prevent direct upward light, particularly at low angles above the horizon; no over lighting, i.e. avoid using higher lighting levels than strictly needed for the task, constraining illumination to the area where it is needed and the time it will be used. Nevertheless, even after the best control of the light distribution is reached and when the proper quantity of light is used, some upward light emission remains, due to reflections from the lit surfaces and atmospheric scatter. The environmental impact of this "residual light pollution", cannot be neglected and should be limited too. Here we propose a new way to limit the effects of this residual light pollution on wildlife, human health and stellar visibility. We performed analysis of the spectra of common types of lamps for external use, including the new LEDs. We evaluated their emissions relative to the spectral response functions of human eye photoreceptors, in the photopic, scotopic and the 'meltopic' melatonin suppressing bands. We found that the amount of pollution is strongly dependent on the spectral characteristics of the lamps, with the more environmentally friendly lamps being low pressure sodium, followed by high pressure sodium. Most polluting are the lamps with a strong blue emission, like Metal Halide and white LEDs. Migration from the now widely used sodium lamps to white lamps (MH and LEDs) would produce an increase of pollution in the scotopic and melatonin suppression bands of more than five times the present levels, supposing the same photopic installed flux. This increase will exacerbate known and possible unknown effects of light pollution on human health, environment

  20. Assessing hydrological impacts of tree-based bioenergy feedstock

    CSIR Research Space (South Africa)

    Gush, Mark B

    2010-01-01

    Full Text Available This chapter provides a methodology for assessing the hydrological impacts of tree-based bioenergy feedstock. Based on experience gained in South Africa, it discusses the tasks required to reach an understanding of the likely water resource impacts...

  1. Heat transfer calculations for the High Flux Isotope Reactor (HFIR). Technical specifications: bases for safety limits and limiting safety system settings

    International Nuclear Information System (INIS)

    Sims, T.M.; Swanks, J.H.

    1977-09-01

    Heat transfer analyses, in support of the preparation of the HFIR technical specifications, were made to establish the bases for the safety limits and limiting safety system settings applicable to the HFIR. The results of these analyses, along with the detailed bases, are presented

  2. Regional climate model simulations indicate limited climatic impacts by operational and planned European wind farms.

    Science.gov (United States)

    Vautard, Robert; Thais, Françoise; Tobin, Isabelle; Bréon, François-Marie; Devezeaux de Lavergne, Jean-Guy; Colette, Augustin; Yiou, Pascal; Ruti, Paolo Michele

    2014-01-01

    The rapid development of wind energy has raised concerns about environmental impacts. Temperature changes are found in the vicinity of wind farms and previous simulations have suggested that large-scale wind farms could alter regional climate. However, assessments of the effects of realistic wind power development scenarios at the scale of a continent are missing. Here we simulate the impacts of current and near-future wind energy production according to European Union energy and climate policies. We use a regional climate model describing the interactions between turbines and the atmosphere, and find limited impacts. A statistically significant signal is only found in winter, with changes within ±0.3 °C and within 0-5% for precipitation. It results from the combination of local wind farm effects and changes due to a weak, but robust, anticyclonic-induced circulation over Europe. However, the impacts remain much weaker than the natural climate interannual variability and changes expected from greenhouse gas emissions.

  3. Study on Market Stability and Price Limit of Chinese Stock Index Futures Market: An Agent-Based Modeling Perspective.

    Science.gov (United States)

    Xiong, Xiong; Nan, Ding; Yang, Yang; Yongjie, Zhang

    2015-01-01

    This paper explores a method of managing the risk of the stock index futures market and the cross-market through analyzing the effectiveness of price limits on the Chinese Stock Index 300 futures market. We adopt a cross-market artificial financial market (include the stock market and the stock index futures market) as a platform on which to simulate the operation of the CSI 300 futures market by changing the settings of price limits. After comparing the market stability under different price limits by appropriate liquidity and volatility indicators, we find that enhancing price limits or removing price limits both play a negative impact on market stability. In contrast, a positive impact exists on market stability if the existing price limit is maintained (increase of limit by10%, down by 10%) or it is broadened to a proper extent. Our study provides reasonable advice for a price limit setting and risk management for CSI 300 futures.

  4. Impact and Limitations Deriving from Basel II within the Context of the Current Financial Crisis

    Directory of Open Access Journals (Sweden)

    Oana Miruna DĂNILĂ

    2012-06-01

    Full Text Available The Banking sector risk management framework, geared towards maintaining a solid capital adequacy level, has witnessed a permanent evolution, determined by the global economic and financial reality.Basel II has brought an improvement of the risk management framework by adding minimum capital levels corresponding to market and operational risk and by the introduction of internal rating models. However the current crisis has brought forward some adverse effects as well as limitations.This paper analyses the evolution of prudential rules and regulations introduced by Basel II and their impact on the banking system together with outlining certain limitations.

  5. A health impact assessment of a proposed bill to decrease speed limits on local roads in Massachusetts (U.S.A.).

    Science.gov (United States)

    James, Peter; Ito, Kate; Banay, Rachel F; Buonocore, Jonathan J; Wood, Benjamin; Arcaya, Mariana C

    2014-10-02

    Decreasing traffic speeds increases the amount of time drivers have to react to road hazards, potentially averting collisions, and makes crashes that do happen less severe. Boston's regional planning agency, the Metropolitan Area Planning Council (MAPC), in partnership with the Massachusetts Department of Public Health (MDPH), conducted a Health Impact Assessment (HIA) that examined the potential health impacts of a proposed bill in the state legislature to lower the default speed limits on local roads from 30 miles per hour (mph) to 25 mph. The aim was to reduce vehicle speeds on local roads to a limit that is safer for pedestrians, cyclists, and children. The passage of this proposed legislation could have had far-reaching and potentially important public health impacts. Lower default speed limits may prevent around 18 fatalities and 1200 serious injuries to motorists, cyclists and pedestrians each year, as well as promote active transportation by making local roads feel more hospitable to cyclists and pedestrians. While a lower speed limit would increase congestion and slightly worsen air quality, the benefits outweigh the costs from both a health and economic perspective and would save the state approximately $62 million annually from prevented fatalities and injuries.

  6. MESUR: USAGE-BASED METRICS OF SCHOLARLY IMPACT

    Energy Technology Data Exchange (ETDEWEB)

    BOLLEN, JOHAN [Los Alamos National Laboratory; RODRIGUEZ, MARKO A. [Los Alamos National Laboratory; VAN DE SOMPEL, HERBERT [Los Alamos National Laboratory

    2007-01-30

    The evaluation of scholarly communication items is now largely a matter of expert opinion or metrics derived from citation data. Both approaches can fail to take into account the myriad of factors that shape scholarly impact. Usage data has emerged as a promising complement to existing methods o fassessment but the formal groundwork to reliably and validly apply usage-based metrics of schlolarly impact is lacking. The Andrew W. Mellon Foundation funded MESUR project constitutes a systematic effort to define, validate and cross-validate a range of usage-based metrics of schlolarly impact by creating a semantic model of the scholarly communication process. The constructed model will serve as the basis of a creating a large-scale semantic network that seamlessly relates citation, bibliographic and usage data from a variety of sources. A subsequent program that uses the established semantic network as a reference data set will determine the characteristics and semantics of a variety of usage-based metrics of schlolarly impact. This paper outlines the architecture and methodology adopted by the MESUR project and its future direction.

  7. Feasibility Study of an Airbag-Based Crew Impact Attenuation System for the Orion MPCV

    Science.gov (United States)

    Do, Sydney; deWeck, Olivier

    2011-01-01

    Airbag-based methods for crew impact attenuation have been highlighted as a potential lightweight means of enabling safe land-landings for the Orion Multi-Purpose Crew Vehicle, and the next generation of ballistic shaped spacecraft. To investigate the performance feasibility of this concept during a nominal 7.62m/s Orion landing, a full-scale personal airbag system 24% lighter than the Orion baseline has been developed, and subjected to 38 drop tests on land. Through this effort, the system has demonstrated the ability to maintain the risk of injury to an occupant during a 7.85m/s, 0 deg. impact angle land-landing to within the NASA specified limit of 0.5%. In accomplishing this, the airbag-based crew impact attenuation concept has been proven to be feasible. Moreover, the obtained test results suggest that by implementing anti-bottoming airbags to prevent direct contact between the system and the landing surface, the system performance during landings with 0 deg impact angles can be further improved, by at least a factor of two. Additionally, a series of drop tests from the nominal Orion impact angle of 30 deg indicated that severe injury risk levels would be sustained beyond impact velocities of 5m/s. This is a result of the differential stroking of the airbags within the system causing a shearing effect between the occupant seat structure and the spacecraft floor, removing significant stroke from the airbags.

  8. Finite element-based limit load of piping branch junctions under combined loadings

    International Nuclear Information System (INIS)

    Xuan Fuzhen; Li Peining

    2004-01-01

    The limit load is an important input parameter in engineering defect-assessment procedures and strength design. In the present work, a total of 100 different piping branch junction models for the limit load calculation were performed under combined internal pressure and moments in use of non-linear finite element (FE) method. Three different existing accumulation rules for limit load, i.e., linear equation, parabolic equation and quadratic equation were discussed on the basis of FE results. A novel limit load solution was developed based on detailed three-dimensional FE limit analyses which accommodated the geometrical parameter influence, together with analytical solutions based on equilibrium stress fields. Finally, six experimental results were provided to justify the presented equation. According to the FE limit analysis, limit load interaction of the piping tees under combined pressure and moments has a relationship with the geometrical parameters, especially with the diameter ratio d/D. The predicted limit loads from the presented formula are very close to the experimental data. The resulting limit load solution is given in a closed form, and thus can be easily used in practice

  9. E-IMPACT - A ROBUST HAZARD-BASED ENVIRONMENTAL IMPACT ASSESSMENT APPROACH FOR PROCESS INDUSTRIES

    Directory of Open Access Journals (Sweden)

    KHANDOKER A. HOSSAIN

    2008-04-01

    Full Text Available This paper proposes a hazard-based environmental impact assessment approach (E-Impact, for evaluating the environmental impact during process design and retrofit stages. E-Impact replaces the normalisation step of the conventional impact assessment phase. This approach compares the impact scores for different options and assigns a relative score to each option. This eliminates the complexity of the normalisation step in the evaluation phase. The applicability of the E-Impact has been illustrated through a case study of solvent selection in an acrylic acid manufacturing plant. E-Impact is used in conjunction with Aspen-HYSYS process simulator to develop mass and heat balance data.

  10. Development of derived limits for radiological protection against ionizing radiation based on ICRP-60 recommendations

    International Nuclear Information System (INIS)

    Jang, S. Y.; Lee, B. S.

    1999-01-01

    Derived limits such as the Annual Limit on Intake (ALI), Derived Air Concentration (DAC) and Effluent Concentration Limit (ECL) for radiological protection against ionizing radiation based on ICRP-60 recommendations were calculated using dose limits and committed effective dose coefficients of the basic Safety Standards of IAEA (i.e. safety series 115; BSS-96). Derived limits regarding occupational exposure were derived using methodologies of ICRP-61 and dose limit stated in ICRP -60. ECL in air and water for the control of radioactive discharge into the environment were derived using methodologies of 10 CFR part 20 and dose limit stated in ICRP-60. In order to analyze the impact of implementing derived limits on nuclear facilities, the derived values in this study were compared with those prescribed in 10 CFR part 20 as well as the Maximum Permissible Concentrations (MPC) of Notice No. 98-12 of the Ministry of Science and Technology (MOST). According to the comparison results, ECLs in air and water for the control of radioactive discharge into the environment in this study are shown to have lower values (i.e. more conservative), for most part, than those in Notice No. 98-12. These differences are due to the reduction of dose limit, adoption of a weighting factor for age-dependency in dose coefficients, and application of new respiratory tract model and bio-kinetics model. Especially, for uranium elements (i.e., 235 U, 238 U, etc.), which are governing ones in the nuclear fuel industries, ECLs in water are approximately a magnitude in the order of two lower than those in Notice No. 98-12. These are attributable to the adoption of a weighting factor for age-dependency in dose coefficients, newly recommended dose coefficients for ingestion pathway, and reduction of dose limit. It was found out that the differences in ECLs in water for uranium elements originated mostly from ingestion dose coefficients recommended by BSS-96. (author). 6 refs., 2 tabs., 5 figs

  11. The impact of mammographic screening on breast cancer mortality in Europe

    DEFF Research Database (Denmark)

    Broeders, Mireille; Moss, Sue; Nyström, Lennarth

    2012-01-01

    To assess the impact of population-based mammographic screening on breast cancer mortality in Europe, considering different methodologies and limitations of the data.......To assess the impact of population-based mammographic screening on breast cancer mortality in Europe, considering different methodologies and limitations of the data....

  12. Reporting surgical site infections following total hip and knee arthroplasty: impact of limiting surveillance to the operative hospital.

    Science.gov (United States)

    Yokoe, Deborah S; Avery, Taliser R; Platt, Richard; Huang, Susan S

    2013-11-01

    Public reporting of surgical site infections (SSIs) by hospitals is largely limited to infections detected during surgical hospitalizations or readmissions to the same facility. SSI rates may be underestimated if patients with SSIs are readmitted to other hospitals. We assessed the impact of readmissions to other facilities on hospitals' SSI rates following primary total hip arthroplasty (THA) or total knee arthroplasty (TKA). This was a retrospective cohort study of all patients who underwent primary THA or TKA at California hospitals between 1 January 2006 and 31 December 2009. SSIs were identified using ICD-9-CM diagnosis codes predictive of SSI assigned at any California hospital within 365 days of surgery using a statewide repository of hospital data that allowed tracking of patients between facilities. We used statewide data to estimate the fraction of each hospital's THA and TKA SSIs identified at the operative hospital versus other hospitals. A total of 91 121 THA and 121 640 TKA procedures were identified. Based on diagnosis codes, SSIs developed following 2214 (2.3%) THAs and 2465 (2.0%) TKAs. Seventeen percent of SSIs would have been missed by operative hospital surveillance alone. The proportion of hospitals' SSIs detected at nonoperative hospitals ranged from 0% to 100%. Including SSIs detected at nonoperative hospitals resulted in better relative ranking for 61% of THA hospitals and 61% of TKA hospitals. Limiting SSI surveillance to the operative hospital caused varying degrees of SSI underestimation and substantially impacted hospitals' relative rankings, suggesting that alternative methods for comprehensive postdischarge surveillance are needed for accurate benchmarking.

  13. LDPC decoder with a limited-precision FPGA-based floating-point multiplication coprocessor

    Science.gov (United States)

    Moberly, Raymond; O'Sullivan, Michael; Waheed, Khurram

    2007-09-01

    Implementing the sum-product algorithm, in an FPGA with an embedded processor, invites us to consider a tradeoff between computational precision and computational speed. The algorithm, known outside of the signal processing community as Pearl's belief propagation, is used for iterative soft-decision decoding of LDPC codes. We determined the feasibility of a coprocessor that will perform product computations. Our FPGA-based coprocessor (design) performs computer algebra with significantly less precision than the standard (e.g. integer, floating-point) operations of general purpose processors. Using synthesis, targeting a 3,168 LUT Xilinx FPGA, we show that key components of a decoder are feasible and that the full single-precision decoder could be constructed using a larger part. Soft-decision decoding by the iterative belief propagation algorithm is impacted both positively and negatively by a reduction in the precision of the computation. Reducing precision reduces the coding gain, but the limited-precision computation can operate faster. A proposed solution offers custom logic to perform computations with less precision, yet uses the floating-point format to interface with the software. Simulation results show the achievable coding gain. Synthesis results help theorize the the full capacity and performance of an FPGA-based coprocessor.

  14. Impact of selected risk factors on expected lifetime without long-standing, limiting illness in Denmark

    DEFF Research Database (Denmark)

    Brønnum-Hansen, Henrik; Juel, Knud; Davidsen, Michael

    2007-01-01

    long-standing, limiting illness was 8-10 years shorter among sedentary than physically active people. Obesity shortened lifetime without illness by 5 years for men and ten years for women. CONCLUSION: The results of this study could be used in health policy-making, as the potential gains in public......OBJECTIVE: To estimate the impacts of tobacco smoking, high alcohol consumption, physical inactivity and overweight on expected lifetime with and without long-standing, limiting illness. METHODS: Life tables for each level of exposure to the risk factors were constructed, mainly on the basis......-olds was 9-10 years shorter for heavy smokers than for those who never smoke, and all the lifetime lost would have been without long-standing, limiting illness. Similarly, all 5 years of expected lifetime lost by men with high alcohol consumption would have been without illness. The expected lifetime without...

  15. Measuring the impact of health problems among adults with limited mobility in Thailand: further validation of the Perceived Impact of Problem Profile

    Directory of Open Access Journals (Sweden)

    Manderson Lenore

    2008-01-01

    Full Text Available Abstract Background The Perceived Impact of Problem Profile (PIPP was developed to provide a tool for measuring the impact of a health condition from the individual's perspective, using the ICF model as a framework. One of the aims of the ICF is to enable the comparison of data across countries, however, relatively little is known about the subjective experience of disability in middle and low-income countries. The aim of this study was to assess the validity of the Perceived Impact of Problem Profile (PIPP for use among adults with a disability in Thailand using Rasch analysis. Methods A total of 210 adults with mobility impairment from the urban, rural and remote areas of northeast Thailand completed the PIPP, which contains 23 items assessing both impact and distress across five key domains (Self-care, Mobility, Participation, Relationships, and Psychological Well-being. Rasch analysis, using RUMM2020, was conducted to assess the internal validity and psychometric properties of the PIPP Impact subscales. Validation of the PIPP Impact scales was conducted by comparing scores across the different response levels of the EQ5D items. Results Rasch analysis indicated that participants did not clearly differentiate between 'impact' and 'distress,' the two aspects assessed by the PIPP. Further analyses were therefore limited to the PIPP Impact subscales. These showed adequate psychometric properties, demonstrating fit to the Rasch model and good person separation reliability. Preliminary validity testing using the EQ5D items provided support for the PIPP Impact subscales. Conclusion The results provide further support for the psychometric properties of the PIPP Impact scales and indicate that it is a suitable tool for use among adults with a locomotor disability in Thailand. Further research is needed to validate the PIPP across different cultural contexts and health conditions and to assess the usefulness of separate Impact and Distress subscales.

  16. Measuring the impact of health problems among adults with limited mobility in Thailand: further validation of the Perceived Impact of Problem Profile

    Science.gov (United States)

    Misajon, RoseAnne; Pallant, Julie F; Manderson, Lenore; Chirawatkul, Siriporn

    2008-01-01

    Background The Perceived Impact of Problem Profile (PIPP) was developed to provide a tool for measuring the impact of a health condition from the individual's perspective, using the ICF model as a framework. One of the aims of the ICF is to enable the comparison of data across countries, however, relatively little is known about the subjective experience of disability in middle and low-income countries. The aim of this study was to assess the validity of the Perceived Impact of Problem Profile (PIPP) for use among adults with a disability in Thailand using Rasch analysis. Methods A total of 210 adults with mobility impairment from the urban, rural and remote areas of northeast Thailand completed the PIPP, which contains 23 items assessing both impact and distress across five key domains (Self-care, Mobility, Participation, Relationships, and Psychological Well-being). Rasch analysis, using RUMM2020, was conducted to assess the internal validity and psychometric properties of the PIPP Impact subscales. Validation of the PIPP Impact scales was conducted by comparing scores across the different response levels of the EQ5D items. Results Rasch analysis indicated that participants did not clearly differentiate between 'impact' and 'distress,' the two aspects assessed by the PIPP. Further analyses were therefore limited to the PIPP Impact subscales. These showed adequate psychometric properties, demonstrating fit to the Rasch model and good person separation reliability. Preliminary validity testing using the EQ5D items provided support for the PIPP Impact subscales. Conclusion The results provide further support for the psychometric properties of the PIPP Impact scales and indicate that it is a suitable tool for use among adults with a locomotor disability in Thailand. Further research is needed to validate the PIPP across different cultural contexts and health conditions and to assess the usefulness of separate Impact and Distress subscales. PMID:18208616

  17. Reliability Evaluation of Bridges Based on Nonprobabilistic Response Surface Limit Method

    OpenAIRE

    Chen, Xuyong; Chen, Qian; Bian, Xiaoya; Fan, Jianping

    2017-01-01

    Due to many uncertainties in nonprobabilistic reliability assessment of bridges, the limit state function is generally unknown. The traditional nonprobabilistic response surface method is a lengthy and oscillating iteration process and leads to difficultly solving the nonprobabilistic reliability index. This article proposes a nonprobabilistic response surface limit method based on the interval model. The intention of this method is to solve the upper and lower limits of the nonprobabilistic ...

  18. MgB2-based superconductors for fault current limiters

    Science.gov (United States)

    Sokolovsky, V.; Prikhna, T.; Meerovich, V.; Eisterer, M.; Goldacker, W.; Kozyrev, A.; Weber, H. W.; Shapovalov, A.; Sverdun, V.; Moshchil, V.

    2017-02-01

    A promising solution of the fault current problem in power systems is the application of fast-operating nonlinear superconducting fault current limiters (SFCLs) with the capability of rapidly increasing their impedance, and thus limiting high fault currents. We report the results of experiments with models of inductive (transformer type) SFCLs based on the ring-shaped bulk MgB2 prepared under high quasihydrostatic pressure (2 GPa) and by hot pressing technique (30 MPa). It was shown that the SFCLs meet the main requirements to fault current limiters: they possess low impedance in the nominal regime of the protected circuit and can fast increase their impedance limiting both the transient and the steady-state fault currents. The study of quenching currents of MgB2 rings (SFCL activation current) and AC losses in the rings shows that the quenching current density and critical current density determined from AC losses can be 10-20 times less than the critical current determined from the magnetization experiments.

  19. Life cycle environmental impacts of wastewater-based algal biofuels.

    Science.gov (United States)

    Mu, Dongyan; Min, Min; Krohn, Brian; Mullins, Kimberley A; Ruan, Roger; Hill, Jason

    2014-10-07

    Recent research has proposed integrating wastewater treatment with algae cultivation as a way of producing algal biofuels at a commercial scale more sustainably. This study evaluates the environmental performance of wastewater-based algal biofuels with a well-to-wheel life cycle assessment (LCA). Production pathways examined include different nutrient sources (municipal wastewater influent to the activated sludge process, centrate from the sludge drying process, swine manure, and freshwater with synthetic fertilizers) combined with emerging biomass conversion technologies (microwave pyrolysis, combustion, wet lipid extraction, and hydrothermal liquefaction). Results show that the environmental performance of wastewater-based algal biofuels is generally better than freshwater-based algal biofuels, but depends on the characteristics of the wastewater and the conversion technologies. Of 16 pathways compared, only the centrate cultivation with wet lipid extraction pathway and the centrate cultivation with combustion pathway have lower impacts than petroleum diesel in all environmental categories examined (fossil fuel use, greenhouse gas emissions, eutrophication potential, and consumptive water use). The potential for large-scale implementation of centrate-based algal biofuel, however, is limited by availability of centrate. Thus, it is unlikely that algal biofuels can provide a large-scale and environmentally preferable alternative to petroleum transportation fuels without considerable improvement in current production technologies. Additionally, the cobenefit of wastewater-based algal biofuel production as an alternate means of treating various wastewaters should be further explored.

  20. Limited impact on decadal-scale climate change from increased use of natural gas.

    Science.gov (United States)

    McJeon, Haewon; Edmonds, Jae; Bauer, Nico; Clarke, Leon; Fisher, Brian; Flannery, Brian P; Hilaire, Jérôme; Krey, Volker; Marangoni, Giacomo; Mi, Raymond; Riahi, Keywan; Rogner, Holger; Tavoni, Massimo

    2014-10-23

    The most important energy development of the past decade has been the wide deployment of hydraulic fracturing technologies that enable the production of previously uneconomic shale gas resources in North America. If these advanced gas production technologies were to be deployed globally, the energy market could see a large influx of economically competitive unconventional gas resources. The climate implications of such abundant natural gas have been hotly debated. Some researchers have observed that abundant natural gas substituting for coal could reduce carbon dioxide (CO2) emissions. Others have reported that the non-CO2 greenhouse gas emissions associated with shale gas production make its lifecycle emissions higher than those of coal. Assessment of the full impact of abundant gas on climate change requires an integrated approach to the global energy-economy-climate systems, but the literature has been limited in either its geographic scope or its coverage of greenhouse gases. Here we show that market-driven increases in global supplies of unconventional natural gas do not discernibly reduce the trajectory of greenhouse gas emissions or climate forcing. Our results, based on simulations from five state-of-the-art integrated assessment models of energy-economy-climate systems independently forced by an abundant gas scenario, project large additional natural gas consumption of up to +170 per cent by 2050. The impact on CO2 emissions, however, is found to be much smaller (from -2 per cent to +11 per cent), and a majority of the models reported a small increase in climate forcing (from -0.3 per cent to +7 per cent) associated with the increased use of abundant gas. Our results show that although market penetration of globally abundant gas may substantially change the future energy system, it is not necessarily an effective substitute for climate change mitigation policy.

  1. Environmental impacts on the evapotranspiration of an water limited and heterogeneous Mediterranean ecosystem.

    Science.gov (United States)

    Montaldo, N.; Curreli, M.; Corona, R.; Oren, R.

    2015-12-01

    Mediterranean water limited ecosystems are characterized by an heterogeneous spatial distribution of different plant functional types (PFT), such as grass and trees, competing for water use. Typically, during the dry summers, these ecosystems are characterized by a simple dual PFTs system with strong-resistant woody vegetation and bare soil, since grass died. The coupled use of sap flow measurements and eddy covariance technique is essential to estimate Evapotransiration (ET) in an heterogeneous ecosystem. An eddy covariance - micrometeorological tower has been installed since 2003 and 33 thermo-dissipation probes based on the Granier technique have installed at the Orroli site in Sardinia (Italy). The site landscape is a mixture of Mediterranean patchy vegetation types: wild olives, different shrubs and herbaceous species, which died during the summer. The sensors have been installed at the Orroli site into 15 wild olives clumps with different characteristics in terms of tree size, exposition to wind and solar radiation and soil depth. A network of 30 soil moisture sensors has also been installed for monitoring soil moisture spatial and temporal dynamics and their correlation with trees. Sap flow measurements show the significantly impacts on ET of soil moisture, radiation, vapor pressure deficit (VPD) and interestingly of tree position into the clump, showing double rates for the trees inside the wild olive clumps. The sap flow sensor outputs are analyzed for estimating innovative allometric relationships between sapwood area, diameter, canopy cover area, which are needed for the correct upscale of the local tree measurements to the site plot larger scale. Finally using an innovative scaling procedure, the sap-flow transpiration at field scale have been compared to the eddy covariance ET, showing the approximation of the eddy covariance technique. Finally the impact of environmental factors on ET for different soil depth and tree position is demonstrated.

  2. Impact of optical hard limiter on the performance of an optical overlapped-code division multiple access system

    Science.gov (United States)

    Inaty, Elie; Raad, Robert; Tablieh, Nicole

    2011-08-01

    Throughout this paper, a closed form expression of the multiple access interference (MAI) limited bit error rate (BER) is provided for the multiwavelength optical code-division multiple-access system when the system is working above the nominal transmission rate limit imposed by the passive encoding-decoding operation. This system is known in literature as the optical overlapped code division multiple access (OV-CDMA) system. A unified analytical framework is presented emphasizing the impact of optical hard limiter (OHL) on the BER performance of such a system. Results show that the performance of the OV-CDMA system may be highly improved when using OHL preprocessing at the receiver side.

  3. Limitation of radioactive discharges from NPP based on radionuclide specific monitoring

    International Nuclear Information System (INIS)

    Bucina, I.; Malatova, I.; Vidlakova, J.

    1998-01-01

    Monitoring of gaseous and liquid discharges from nuclear power plants based on particulate-iodine-gas measurements and gross beta or gamma plus tritium measurements is being improved by performing radionuclide specific measurements using semiconductor gamma and beta spectrometers and radiochemical methods. A new concept of regulatory effluent limits is being developed. The activities of all the relevant radionuclides discharged during a years, multiplied by the appropriate Sv/Bq conversion coefficient based on a standard multi-pathway model, are summed up, and the effective dose is compared with the new limit. Such limits should be laid down as the per capita collective commitment effective dose in the plant surroundings for atmospheric discharges, and as the committed effective dose to a critical group member for the hydrospheric releases

  4. Assessment of the impact of HTSCs on superconducting fault-current limiters

    International Nuclear Information System (INIS)

    Giese, R.F.; Runde, M.

    1992-01-01

    The possible impact of nitrogen-cooled superconductors on the design and cost of superconducting fault-current limiters is assessed by considering the technical specifications such devices must meet and by comparing material properties of 77-K and 4-K superconductors. The main advantage of operating superconducting at 77 K is that the refrigeration operating cost is reduced by a factor of up to 25, and the refrigeration capital cost is reduced by a factor of up to 10. The heat capacity at 77 K is several orders of magnitude larger than at 4 K. This phenomenon increases conductor stability against flux jumps but makes switching from the superconducting to normal state slow and difficult. Therefore, a high critical current density, probably at least 10 5 A/cm 2 , is required

  5. Performance based design of reinforced concrete beams under impact

    Directory of Open Access Journals (Sweden)

    S. Tachibana

    2010-06-01

    Full Text Available The purpose of this research is to collect fundamental data and to establish a performance-based design method for reinforced concrete beams under perpendicular impact load.

    Series of low speed impact experiments using reinforced concrete beams were performed varying span length, cross section and main reinforcement.

    The experimental results are evaluated focusing on the impact load characteristics and the impact behaviours of reinforced concrete beams. Various characteristic values and their relationships are investigated such as the collision energy, the impact force duration, the energy absorbed by the beams and the beam response values. Also the bending performance of the reinforced concrete beams against perpendicular impact is evaluated.

    An equation is proposed to estimate the maximum displacement of the beam based on the collision energy and the static ultimate bending strength. The validity of the proposed equation is confirmed by comparison with experimental results obtained by other researchers as well as numerical results obtained by FEM simulations. The proposed equation allows for a performance based design of the structure accounting for the actual deformation due to the expected impact action.

  6. Quantifying immediate price impact of trades based on the k-shell decomposition of stock trading networks

    Science.gov (United States)

    Xie, Wen-Jie; Li, Ming-Xia; Xu, Hai-Chuan; Chen, Wei; Zhou, Wei-Xing; Stanley, H. Eugene

    2016-10-01

    Traders in a stock market exchange stock shares and form a stock trading network. Trades at different positions of the stock trading network may contain different information. We construct stock trading networks based on the limit order book data and classify traders into k classes using the k-shell decomposition method. We investigate the influences of trading behaviors on the price impact by comparing a closed national market (A-shares) with an international market (B-shares), individuals and institutions, partially filled and filled trades, buyer-initiated and seller-initiated trades, and trades at different positions of a trading network. Institutional traders professionally use some trading strategies to reduce the price impact and individuals at the same positions in the trading network have a higher price impact than institutions. We also find that trades in the core have higher price impacts than those in the peripheral shell.

  7. Efficiency-limiting processes in OPV bulk heterojunctions of GeNIDTBT and IDT-based acceptors

    KAUST Repository

    Al-Saggaf, Sarah M.

    2018-05-16

    The successful realization of highly efficient bulk heterojunction OPV devices requires the development of organic donor and acceptor materials with tailored properties. Recently, non-fullerene acceptors (NFAs) have emerged as an alternative to the ubiquitously used fullerene derivatives. NFAs showed a rapid increase in efficiencies, now exceeding a PCE of 13%. In my thesis research, I used two small molecule IDT-based acceptors, namely O-IDTBR and O-IDTBCN, in combination with a wide bandgap donor polymer, GeNIDT-BT, as active material in BHJ solar cells and investigated their photophysical characteristics. The polymer combined with O-IDTBR as acceptor achieved a power conversion efficiency of only 2%, which is significantly lower than that obtained for the system of GeNIDT-BT: O-IDTBCN (5.3%). Using nano- to microsecond transient absorption spectroscopy, I investigated both systems and demonstrated that GeNIDT-BT:O-IDTBR exhibits more geminate recombination of interfacial charge-transfer states, leading to lower short circuit currents. Using time-delayed collection field experiments, I studied the field dependence of charge generation and its impact on the device fill factor. Overall, my results provide a qualitative understanding of the efficiency-limiting processes in both systems and their impact on device performance.

  8. Predicting the behavioural impact of transcranial direct current stimulation: issues and limitations

    Directory of Open Access Journals (Sweden)

    Archy Otto De Berker

    2013-10-01

    Full Text Available The transcranial application of weak currents to the human brain has enjoyed a decade of success, providing a simple and powerful tool for non-invasively altering human brain function. However, our understanding of current delivery and its impact upon neural circuitry leaves much to be desired. We argue that the credibility of conclusions drawn with tDCS is contingent upon realistic explanations of how tDCS works, and that our present understanding of tDCS limits the technique’s use to localize function in the human brain. We outline two central issues where progress is required: the localization of currents, and predicting their functional consequence. We encourage experimenters to eschew simplistic explanations of mechanisms of transcranial current stimulation. We suggest the use of individualized current modelling, together with computational neurostimulation to inform mechanistic frameworks in which to interpret the physiological impact of tDCS. We hope that through mechanistically richer descriptions of current flow and action, insight into the biological processes by which transcranial currents influence behaviour can be gained, leading to more effective stimulation protocols and empowering conclusions drawn with tDCS.

  9. Long-term Impact of Bile Duct Injury on Morbidity, Mortality, Quality of Life, and Work Related Limitations

    NARCIS (Netherlands)

    Booij, Klaske A. C.; de Reuver, Philip R.; van Dieren, Susan; van Delden, Otto M.; Rauws, Erik A.; Busch, Olivier R.; van Gulik, Thomas M.; Gouma, Dirk J.

    2017-01-01

    Assessment of long-term comprehensive outcome of multimodality treatment of bile duct injury (BDI) in terms of morbidity, mortality, quality of life (QoL), survival, and work related limitations. The impact of BDI on work ability is scarcely investigated. BDI patients referred to a tertiary center

  10. Beam-limiting and radiation-limiting interlocks

    International Nuclear Information System (INIS)

    Macek, R.J.

    1996-01-01

    This paper reviews several aspects of beam-limiting and radiation- limiting interlocks used for personnel protection at high-intensity accelerators. It is based heavily on the experience at the Los Alamos Neutron Science Center (LANSCE) where instrumentation-based protection is used extensively. Topics include the need for ''active'' protection systems, system requirements, design criteria, and means of achieving and assessing acceptable reliability. The experience with several specific devices (ion chamber-based beam loss interlock, beam current limiter interlock, and neutron radiation interlock) designed and/or deployed to these requirements and criteria is evaluated

  11. Implementation of e-commerce in developing countries: impact and its limitations-Albanian Case study

    Directory of Open Access Journals (Sweden)

    Genti Çela

    2016-07-01

    Full Text Available The implementation of Electronic Commerce (hereinafter referred to as "e-Commerce" in developed countries has been proven as an indisputable potential to ameliorate the efficiency and productivity in different areas, therefore, its implementation is attracting significant attention in developing countries. Despite its opportunities established in developed countries, there were many doubts about the e-commerce implementation in developing countries. That reluctance is heightened by the limited number of studies on e-commerce and the lack of legislation. This paper aims to contribute on filling the research gap by highlighting the e-commerce implementation in Albania as a developing country, its importance, the level of trust, its benefits, its positive or negative impacts and its limitations. This study will be continuously and accordingly updated with new evidence based on research results, along with future developments of Albania’s economic, political, social and demographic environment. This is because different areas represent different infrastructure and different social and economic characteristics, different levels of trust on transactions, different attitudes towards institutions. We have also take into consideration that different communities have different attitudes toward the acceptance and developments of e-Commerce system. In this paper, we present a comprehensive approach to e-commerce, concentrating specifically on Albanian case. Firstly we analyze the current situation of e-Commerce. Secondly we pay attention to the benefits and legal strategies for its implementation. The third step consists in presenting the relevant objectives. We believe and insist that the development of e-commerce in developing nations, - including Albania, has a positive perspective, if the government, companies and the public can better understand and implement e-Commerce.

  12. Cost versus life cycle assessment-based environmental impact optimization of drinking water production plants.

    Science.gov (United States)

    Capitanescu, F; Rege, S; Marvuglia, A; Benetto, E; Ahmadi, A; Gutiérrez, T Navarrete; Tiruta-Barna, L

    2016-07-15

    Empowering decision makers with cost-effective solutions for reducing industrial processes environmental burden, at both design and operation stages, is nowadays a major worldwide concern. The paper addresses this issue for the sector of drinking water production plants (DWPPs), seeking for optimal solutions trading-off operation cost and life cycle assessment (LCA)-based environmental impact while satisfying outlet water quality criteria. This leads to a challenging bi-objective constrained optimization problem, which relies on a computationally expensive intricate process-modelling simulator of the DWPP and has to be solved with limited computational budget. Since mathematical programming methods are unusable in this case, the paper examines the performances in tackling these challenges of six off-the-shelf state-of-the-art global meta-heuristic optimization algorithms, suitable for such simulation-based optimization, namely Strength Pareto Evolutionary Algorithm (SPEA2), Non-dominated Sorting Genetic Algorithm (NSGA-II), Indicator-based Evolutionary Algorithm (IBEA), Multi-Objective Evolutionary Algorithm based on Decomposition (MOEA/D), Differential Evolution (DE), and Particle Swarm Optimization (PSO). The results of optimization reveal that good reduction in both operating cost and environmental impact of the DWPP can be obtained. Furthermore, NSGA-II outperforms the other competing algorithms while MOEA/D and DE perform unexpectedly poorly. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Quantifying relative fishing impact on fish populations based on spatio-temporal overlap of fishing effort and stock density

    DEFF Research Database (Denmark)

    Vinther, Morten; Eero, Margit

    2013-01-01

    Evaluations of the effects of management measures on fish populations are usually based on the analyses of population dynamics and estimates of fishing mortality from stock assessments. However, this approach may not be applicable in all cases, in particular for data-limited stocks, which may...... GAM analyses to predict local cod densities and combine this with spatio-temporal data of fishing effort based on VMS (Vessel Monitoring System). To quantify local fishing impact on the stock, retention probability of the gears is taken into account. The results indicate a substantial decline...... in the impact of the Danish demersal trawl fleet on cod in the Kattegat in recent years, due to a combination of closed areas, introduction of selective gears and changes in overall effort....

  14. Impact of preexisting depression on length of stay and discharge destination among patients hospitalized for acute stroke - Linked register-based study

    NARCIS (Netherlands)

    Nuyen, Jasper; Spreeuwenberg, Peter M.; Groenewegen, Peter P.; van den Bos, Geertrudis A. M.; Schellevis, Francois G.

    2008-01-01

    Background and Purpose-There exists limited knowledge regarding the relation between depression and healthcare utilization in stroke patients. The objective of this register-based study was to examine the impact of having preexisting depression at the time of hospital admission for acute stroke on

  15. Impact of Preexisting Depression on Length of Stay and Discharge Destination Among Patients Hospitalized for Acute Stroke : Linked Register-Based Study

    NARCIS (Netherlands)

    Nuyen, Jasper; Spreeuwenberg, Peter M.; Groenewegen, Peter P.; Bos, Geertrudis A.M. van den; Schellevis, Francois G.

    2008-01-01

    Background and Purpose—There exists limited knowledge regarding the relation between depression and healthcare utilization in stroke patients. The objective of this register-based study was to examine the impact of having preexisting depression at the time of hospital admission for acute stroke on

  16. Impact of preexisting depression on length of stay and discharge destination among patients hospitalized for acute stroke: linked register-based study.

    NARCIS (Netherlands)

    Nuyen, J.; Spreeuwenberg, P.; Groenewegen, P.P.; Bos, G.A.M. van den; Schellevis, F.G.

    2008-01-01

    Background and Purpose: There exists limited knowledge regarding the relation between depression and healthcare utilization in stroke patients. The objective of this register-based study was to examine the impact of having preexisting depression at the time of hospital admission for acute stroke on

  17. The impact of regulations, safety considerations and physical limitations on research progress at maximum biocontainment.

    Science.gov (United States)

    Shurtleff, Amy C; Garza, Nicole; Lackemeyer, Matthew; Carrion, Ricardo; Griffiths, Anthony; Patterson, Jean; Edwin, Samuel S; Bavari, Sina

    2012-12-01

    We describe herein, limitations on research at biosafety level 4 (BSL-4) containment laboratories, with regard to biosecurity regulations, safety considerations, research space limitations, and physical constraints in executing experimental procedures. These limitations can severely impact the number of collaborations and size of research projects investigating microbial pathogens of biodefense concern. Acquisition, use, storage, and transfer of biological select agents and toxins (BSAT) are highly regulated due to their potential to pose a severe threat to public health and safety. All federal, state, city, and local regulations must be followed to obtain and maintain registration for the institution to conduct research involving BSAT. These include initial screening and continuous monitoring of personnel, controlled access to containment laboratories, accurate and current BSAT inventory records. Safety considerations are paramount in BSL-4 containment laboratories while considering the types of research tools, workflow and time required for conducting both in vivo and in vitro experiments in limited space. Required use of a positive-pressure encapsulating suit imposes tremendous physical limitations on the researcher. Successful mitigation of these constraints requires additional time, effort, good communication, and creative solutions. Test and evaluation of novel vaccines and therapeutics conducted under good laboratory practice (GLP) conditions for FDA approval are prioritized and frequently share the same physical space with important ongoing basic research studies. The possibilities and limitations of biomedical research involving microbial pathogens of biodefense concern in BSL-4 containment laboratories are explored in this review.

  18. The Impact of Regulations, Safety Considerations and Physical Limitations on Research Progress at Maximum Biocontainment

    Directory of Open Access Journals (Sweden)

    Jean Patterson

    2012-12-01

    Full Text Available We describe herein, limitations on research at biosafety level 4 (BSL-4 containment laboratories, with regard to biosecurity regulations, safety considerations, research space limitations, and physical constraints in executing experimental procedures. These limitations can severely impact the number of collaborations and size of research projects investigating microbial pathogens of biodefense concern. Acquisition, use, storage, and transfer of biological select agents and toxins (BSAT are highly regulated due to their potential to pose a severe threat to public health and safety. All federal, state, city, and local regulations must be followed to obtain and maintain registration for the institution to conduct research involving BSAT. These include initial screening and continuous monitoring of personnel, controlled access to containment laboratories, accurate and current BSAT inventory records. Safety considerations are paramount in BSL-4 containment laboratories while considering the types of research tools, workflow and time required for conducting both in vivo and in vitro experiments in limited space. Required use of a positive-pressure encapsulating suit imposes tremendous physical limitations on the researcher. Successful mitigation of these constraints requires additional time, effort, good communication, and creative solutions. Test and evaluation of novel vaccines and therapeutics conducted under good laboratory practice (GLP conditions for FDA approval are prioritized and frequently share the same physical space with important ongoing basic research studies. The possibilities and limitations of biomedical research involving microbial pathogens of biodefense concern in BSL-4 containment laboratories are explored in this review.

  19. The Impact of Regulations, Safety Considerations and Physical Limitations on Research Progress at Maximum Biocontainment

    Science.gov (United States)

    Shurtleff, Amy C.; Garza, Nicole; Lackemeyer, Matthew; Carrion, Ricardo; Griffiths, Anthony; Patterson, Jean; Edwin, Samuel S.; Bavari, Sina

    2012-01-01

    We describe herein, limitations on research at biosafety level 4 (BSL-4) containment laboratories, with regard to biosecurity regulations, safety considerations, research space limitations, and physical constraints in executing experimental procedures. These limitations can severely impact the number of collaborations and size of research projects investigating microbial pathogens of biodefense concern. Acquisition, use, storage, and transfer of biological select agents and toxins (BSAT) are highly regulated due to their potential to pose a severe threat to public health and safety. All federal, state, city, and local regulations must be followed to obtain and maintain registration for the institution to conduct research involving BSAT. These include initial screening and continuous monitoring of personnel, controlled access to containment laboratories, accurate and current BSAT inventory records. Safety considerations are paramount in BSL-4 containment laboratories while considering the types of research tools, workflow and time required for conducting both in vivo and in vitro experiments in limited space. Required use of a positive-pressure encapsulating suit imposes tremendous physical limitations on the researcher. Successful mitigation of these constraints requires additional time, effort, good communication, and creative solutions. Test and evaluation of novel vaccines and therapeutics conducted under good laboratory practice (GLP) conditions for FDA approval are prioritized and frequently share the same physical space with important ongoing basic research studies. The possibilities and limitations of biomedical research involving microbial pathogens of biodefense concern in BSL-4 containment laboratories are explored in this review. PMID:23342380

  20. Agent-based models for latent liquidity and concave price impact

    Science.gov (United States)

    Mastromatteo, Iacopo; Tóth, Bence; Bouchaud, Jean-Philippe

    2014-04-01

    We revisit the "ɛ-intelligence" model of Tóth et al. [Phys. Rev. X 1, 021006 (2011), 10.1103/PhysRevX.1.021006], which was proposed as a minimal framework to understand the square-root dependence of the impact of meta-orders on volume in financial markets. The basic idea is that most of the daily liquidity is "latent" and furthermore vanishes linearly around the current price, as a consequence of the diffusion of the price itself. However, the numerical implementation of Tóth et al. (2011) was criticized as being unrealistic, in particular because all the "intelligence" was conferred to market orders, while limit orders were passive and random. In this work, we study various alternative specifications of the model, for example, allowing limit orders to react to the order flow or changing the execution protocols. By and large, our study lends strong support to the idea that the square-root impact law is a very generic and robust property that requires very few ingredients to be valid. We also show that the transition from superdiffusion to subdiffusion reported in Tóth et al. (2011) is in fact a crossover but that the original model can be slightly altered in order to give rise to a genuine phase transition, which is of interest on its own. We finally propose a general theoretical framework to understand how a nonlinear impact may appear even in the limit where the bias in the order flow is vanishingly small.

  1. Theoretical Analysis of the Dynamic Properties of a 2-2 Cement-Based Piezoelectric Dual-Layer Stacked Sensor under Impact Load.

    Science.gov (United States)

    Zhang, Taotao; Liao, Yangchao; Zhang, Keping; Chen, Jun

    2017-05-04

    Cement-based piezoelectric materials are widely used due to the fact that compared with common smart materials, they overcome the defects of structure-incompatibility and frequency inconsistency with a concrete structure. However, the present understanding of the mechanical behavior of cement-based piezoelectric smart materials under impact load is still limited. The dynamic characteristics under impact load are of importance, for example, for studying the anti-collision properties of engineering structures and aircraft takeoff-landing safety. Therefore, in this paper, an analytical model was proposed to investigate the dynamic properties of a 2-2 cement-based piezoelectric dual-layer stacked sensor under impact load based on the piezoelectric effect. Theoretical solutions are obtained by utilizing the variable separation and Duhamel integral method. To simulate the impact load and verify the theory, three types of loads, including atransient step load, isosceles triangle load and haversine wave load, are considered and the comparisons between the theoretical results, Li's results and numerical results are presented by using the control variate method and good agreement is found. Furthermore, the influences of several parameters were discussed and other conclusions about this sensor are also given. This should prove very helpful for the design and optimization of the 2-2 cement-based piezoelectric dual-layer stacked sensor in engineering.

  2. 75 FR 65881 - Ownership Limitations and Governance Requirements for Security-Based Swap Clearing Agencies...

    Science.gov (United States)

    2010-10-26

    ... it determines they are necessary or appropriate to improve the governance of, or to mitigate systemic... Part IV Securities and Exchange Commission 17 CFR Part 242 Ownership Limitations and Governance... Ownership Limitations and Governance Requirements for Security- Based Swap Clearing Agencies, Security-Based...

  3. Environmental impact assessment based on planning support system

    NARCIS (Netherlands)

    Carsjens, G.J.; Chen, W.

    2011-01-01

    How to assess environmental impact is one of the keys in land use planning. This article described in detail the concepts of activities, impact zones, functions, and sensitivities, as well as the development of STEPP (strategic tool for integrating environmental aspects in planning procedures) based

  4. Monturaqui meteorite impact crater, Chile: A field test of the utility of satellite-based mapping of ejecta at small craters

    Science.gov (United States)

    Rathbun, K.; Ukstins, I.; Drop, S.

    2017-12-01

    Monturaqui Crater is a small ( 350 m diameter), simple meteorite impact crater located in the Atacama Desert of northern Chile that was emplaced in Ordovician granite overlain by discontinuous Pliocene ignimbrite. Ejecta deposits are granite and ignimbrite, with lesser amounts of dark impact melt and rare tektites and iron shale. The impact restructured existing drainage systems in the area that have subsequently eroded through the ejecta. Satellite-based mapping and modeling, including a synthesis of photographic satellite imagery and ASTER thermal infrared imagery in ArcGIS, were used to construct a basic geological interpretation of the site with special emphasis on understanding ejecta distribution patterns. This was combined with field-based mapping to construct a high-resolution geologic map of the crater and its ejecta blanket and field check the satellite-based geologic interpretation. The satellite- and modeling-based interpretation suggests a well-preserved crater with an intact, heterogeneous ejecta blanket that has been subjected to moderate erosion. In contrast, field mapping shows that the crater has a heavily-eroded rim and ejecta blanket, and the ejecta is more heterogeneous than previously thought. In addition, the erosion rate at Monturaqui is much higher than erosion rates reported elsewhere in the Atacama Desert. The bulk compositions of the target rocks at Monturaqui are similar and the ejecta deposits are highly heterogeneous, so distinguishing between them with remote sensing is less effective than with direct field observations. In particular, the resolution of available imagery for the site is too low to resolve critical details that are readily apparent in the field on the scale of 10s of cm, and which significantly alter the geologic interpretation. The limiting factors for effective remote interpretation at Monturaqui are its target composition and crater size relative to the resolution of the remote sensing methods employed. This

  5. Head Impact Exposure in Youth Football: Comparing Age- and Weight-Based Levels of Play.

    Science.gov (United States)

    Kelley, Mireille E; Urban, Jillian E; Miller, Logan E; Jones, Derek A; Espeland, Mark A; Davenport, Elizabeth M; Whitlow, Christopher T; Maldjian, Joseph A; Stitzel, Joel D

    2017-06-01

    Approximately 5,000,000 athletes play organized football in the United States, and youth athletes constitute the largest proportion with ∼3,500,000 participants. Investigations of head impact exposure (HIE) in youth football have been limited in size and duration. The objective of this study was to evaluate HIE of athletes participating in three age- and weight-based levels of play within a single youth football organization over four seasons. Head impact data were collected using the Head Impact Telemetry (HIT) System. Mixed effects linear models were fitted, and Wald tests were used to assess differences in head accelerations and number of impacts among levels and session type (competitions vs. practices). The three levels studied were levels A (n = 39, age = 10.8 ± 0.7 years, weight = 97.5 ± 11.8 lb), B (n = 48, age = 11.9 ± 0.5 years, weight = 106.1 ± 13.8 lb), and C (n = 32, age = 13.0 ± 0.5 years, weight = 126.5 ± 18.6 lb). A total of 40,538 head impacts were measured. The median/95th percentile linear head acceleration for levels A, B, and C was 19.8/49.4g, 20.6/51.0g, and 22.0/57.9g, respectively. Level C had significantly greater mean linear acceleration than both levels A (p = 0.005) and B (p = 0.02). There were a significantly greater number of impacts per player in a competition than in a practice session for all levels (A, p = 0.0005, B, p = 0.0019, and C, p football and are an important step in making evidence-based decisions to reduce HIE.

  6. Safety assessment of historical masonry churches based on pre-assigned kinematic limit analysis, FE limit and pushover analyses

    International Nuclear Information System (INIS)

    Milani, Gabriele; Valente, Marco

    2014-01-01

    This study presents some results of a comprehensive numerical analysis on three masonry churches damaged by the recent Emilia-Romagna (Italy) seismic events occurred in May 2012. The numerical study comprises: (a) pushover analyses conducted with a commercial code, standard nonlinear material models and two different horizontal load distributions; (b) FE kinematic limit analyses performed using a non-commercial software based on a preliminary homogenization of the masonry materials and a subsequent limit analysis with triangular elements and interfaces; (c) kinematic limit analyses conducted in agreement with the Italian code and based on the a-priori assumption of preassigned failure mechanisms, where the masonry material is considered unable to withstand tensile stresses. All models are capable of giving information on the active failure mechanism and the base shear at failure, which, if properly made non-dimensional with the weight of the structure, gives also an indication of the horizontal peak ground acceleration causing the collapse of the church. The results obtained from all three models indicate that the collapse is usually due to the activation of partial mechanisms (apse, façade, lateral walls, etc.). Moreover the horizontal peak ground acceleration associated to the collapse is largely lower than that required in that seismic zone by the Italian code for ordinary buildings. These outcomes highlight that structural upgrading interventions would be extremely beneficial for the considerable reduction of the seismic vulnerability of such kind of historical structures

  7. Safety assessment of historical masonry churches based on pre-assigned kinematic limit analysis, FE limit and pushover analyses

    Energy Technology Data Exchange (ETDEWEB)

    Milani, Gabriele, E-mail: milani@stru.polimi.it; Valente, Marco, E-mail: milani@stru.polimi.it [Department of Architecture, Built Environment and Construction Engineering (ABC), Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milan (Italy)

    2014-10-06

    This study presents some results of a comprehensive numerical analysis on three masonry churches damaged by the recent Emilia-Romagna (Italy) seismic events occurred in May 2012. The numerical study comprises: (a) pushover analyses conducted with a commercial code, standard nonlinear material models and two different horizontal load distributions; (b) FE kinematic limit analyses performed using a non-commercial software based on a preliminary homogenization of the masonry materials and a subsequent limit analysis with triangular elements and interfaces; (c) kinematic limit analyses conducted in agreement with the Italian code and based on the a-priori assumption of preassigned failure mechanisms, where the masonry material is considered unable to withstand tensile stresses. All models are capable of giving information on the active failure mechanism and the base shear at failure, which, if properly made non-dimensional with the weight of the structure, gives also an indication of the horizontal peak ground acceleration causing the collapse of the church. The results obtained from all three models indicate that the collapse is usually due to the activation of partial mechanisms (apse, façade, lateral walls, etc.). Moreover the horizontal peak ground acceleration associated to the collapse is largely lower than that required in that seismic zone by the Italian code for ordinary buildings. These outcomes highlight that structural upgrading interventions would be extremely beneficial for the considerable reduction of the seismic vulnerability of such kind of historical structures.

  8. Study of anticipated impact on DOE programs from proposed reductions to the external occupational radiation exposure limit

    International Nuclear Information System (INIS)

    1981-02-01

    A study of the impact of reducing the occupational radiation exposure limit from 5 rem/yr to 2.5, 1.0 and 0.5 rem/yr, respectively produced the following conclusions: reduction of the occupational exposure limit would result in significant increase in total accumulated exposure to the current radiation worker population and could require an increase in the work force; important programs would have to be abandoned at a planned exposure limit of 0.5 rem/yr; some engineering technology is not sufficiently developed to design or operate at the 0.5 rem/yr limit; even a factor of 2 reduction (2.5 rem/yr) would significantly increase costs and would result in an increase in total exposure to the work force; in addition to a significant one-time initial capital cost resulting from a 0.5 rem/yr limit, there would be a significant increase in annual costs; the major emphasis in controlling occupational exposure should be on further reduction of total man-rem; and current standards are used only as a limit. For example, 97% of the employees receive less than 0.5 rem/yr

  9. Ballistic Limit of High-Strength Steel and Al7075-T6 Multi-Layered Plates Under 7.62-mm Armour Piercing Projectile Impact

    Directory of Open Access Journals (Sweden)

    N. A. Rahman

    Full Text Available Abstract This paper presents the computational-based ballistic limit of laminated metal panels comprised of high strength steel and aluminium alloy Al7075-T6 plate at different thickness combinations to necessitate the weight reduction of existing armour steel plate. The numerical models of monolithic configuration, double-layered configuration and triple-layered configuration were developed using a commercial explicit finite element code and were impacted by 7.62 mm armour piercing projectile at velocity range of 900 to 950 m/s. The ballistic performance of each configuration plate in terms of ballistic limit velocity, penetration process and permanent deformation was quantified and considered. It was found that the monolithic panel of high-strength steel has the best ballistic performance among all panels, yet it has not caused any weight reduction in existing armour plate. As the weight reduction was increased from 20-30%, the double-layered configuration panels became less resistance to ballistic impact where only at 20% and 23.2% of weight reduction panel could stop the 950m/s projectile. The triple-layered configuration panels with similar areal density performed much better where all panels subjected to 20-30% weight reductions successfully stopped the 950 m/s projectile. Thus, triple-layered configurations are interesting option in designing a protective structure without sacrificing the performance in achieving weight reduction.

  10. Dynamic probability control limits for risk-adjusted CUSUM charts based on multiresponses.

    Science.gov (United States)

    Zhang, Xiang; Loda, Justin B; Woodall, William H

    2017-07-20

    For a patient who has survived a surgery, there could be several levels of recovery. Thus, it is reasonable to consider more than two outcomes when monitoring surgical outcome quality. The risk-adjusted cumulative sum (CUSUM) chart based on multiresponses has been developed for monitoring a surgical process with three or more outcomes. However, there is a significant effect of varying risk distributions on the in-control performance of the chart when constant control limits are applied. To overcome this disadvantage, we apply the dynamic probability control limits to the risk-adjusted CUSUM charts for multiresponses. The simulation results demonstrate that the in-control performance of the charts with dynamic probability control limits can be controlled for different patient populations because these limits are determined for each specific sequence of patients. Thus, the use of dynamic probability control limits for risk-adjusted CUSUM charts based on multiresponses allows each chart to be designed for the corresponding patient sequence of a surgeon or a hospital and therefore does not require estimating or monitoring the patients' risk distribution. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

  11. 40 CFR 1502.7 - Page limits.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Page limits. 1502.7 Section 1502.7 Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY ENVIRONMENTAL IMPACT STATEMENT § 1502.7 Page limits. The text of final environmental impact statements (e.g., paragraphs (d) through (g) of § 1502.10...

  12. A unified classification of alien species based on the magnitude of their environmental impacts.

    Directory of Open Access Journals (Sweden)

    Tim M Blackburn

    2014-05-01

    Full Text Available Species moved by human activities beyond the limits of their native geographic ranges into areas in which they do not naturally occur (termed aliens can cause a broad range of significant changes to recipient ecosystems; however, their impacts vary greatly across species and the ecosystems into which they are introduced. There is therefore a critical need for a standardised method to evaluate, compare, and eventually predict the magnitudes of these different impacts. Here, we propose a straightforward system for classifying alien species according to the magnitude of their environmental impacts, based on the mechanisms of impact used to code species in the International Union for Conservation of Nature (IUCN Global Invasive Species Database, which are presented here for the first time. The classification system uses five semi-quantitative scenarios describing impacts under each mechanism to assign species to different levels of impact-ranging from Minimal to Massive-with assignment corresponding to the highest level of deleterious impact associated with any of the mechanisms. The scheme also includes categories for species that are Not Evaluated, have No Alien Population, or are Data Deficient, and a method for assigning uncertainty to all the classifications. We show how this classification system is applicable at different levels of ecological complexity and different spatial and temporal scales, and embraces existing impact metrics. In fact, the scheme is analogous to the already widely adopted and accepted Red List approach to categorising extinction risk, and so could conceivably be readily integrated with existing practices and policies in many regions.

  13. Experiences with strain based limit state design in The Netherlands

    NARCIS (Netherlands)

    Gresnigt, A.M.; Foeken, R.J. van

    1996-01-01

    Limit state design differs from conventional design methods in that each failure mode is specifically addressed (e.g. burst, collapse, local buckling, fracture due to insufficient strain capacity of the pipe wall, fatigue). Based on an extensive theoretical and experimental research programme,

  14. Stabilizing impacts in force-reflecting teleoperation using distance-to-impact estimates

    International Nuclear Information System (INIS)

    McAree, P.R.; Daniel, R.W.

    2000-01-01

    The level of force that can be stably reflected to the human operator in a force-reflecting teleoperator is constrained by the dynamics of impact between the slave arm and its environment. This paper models the underlying dynamics of impact and describes how the impact effects can be minimized using estimates of the distance between the slave and objects in its workspace. The approach is based on stochastic variational principles and seeks to limit the momentum of the slave arm at impact. Preliminary experimental results show that the approach allows extension of the range of frequencies that can be stably reflected to the human operator

  15. Promoting physical activity among children and adolescents: the strengths and limitations of school-based approaches.

    Science.gov (United States)

    Booth, Michael; Okely, Anthony

    2005-04-01

    Paediatric overweight and obesity is recognised as one of Australia's most significant health problems and effective approaches to increasing physical activity and reducing energy consumption are being sought urgently. Every potential approach and setting should be subjected to critical review in an attempt to maximise the impact of policy and program initiatives. This paper identifies the strengths and limitations of schools as a setting for promoting physical activity. The strengths are: most children and adolescents attend school; most young people are likely to see teachers as credible sources of information; schools provide access to the facilities, infrastructure and support required for physical activity; and schools are the workplace of skilled educators. Potential limitations are: those students who like school the least are the most likely to engage in health-compromising behaviours and the least likely to be influenced by school-based programs; there are about 20 more hours per week available for physical activity outside schools hours than during school hours; enormous demands are already being made on schools; many primary school teachers have low levels of perceived competence in teaching physical education and fundamental movement skills; and opportunities for being active at school may not be consistent with how and when students prefer to be active.

  16. Limitation of radioactive discharges from NPP based on radionuclide specific monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Bucina, I; Malatova, I; Vidlakova, J [National Radaition Protection Institute, Prague (Czech Republic)

    1996-12-31

    Monitoring of nuclear power plants (NPP) discharges into atmosphere and hydrosphere based on particulate-iodine-gas (PIG) measurements and gross beta and gamma plus tritium measurements respectively is being improved by nuclide specific measurements employing semiconductor gamma and alpha spectrometry and radiochemical methods. In connection with the progress new concept of authorized effluent limits and the related regulations is being implemented in the Czech Republic. Activities of all principally contributing to the effective dose radionuclides discharges during a year multiplied by a Sv/Bq conversion coefficient based on a standard model are summed up and the effective dose is compared with the new limit. These limits should be authorized for discharges into atmosphere as per caput collective committed effective dose in the NPP surrounding or as its value multiplied by the number of surrounding segment providing thus committed effective dose to member of a vital critical group and into the hydrosphere as committed effective dose to the critical group member. The criteria for obligatory evaluation of the specific radionuclide contribution and the resulting requirements on minimum detectable activities for both the shorter and longer monitoring intervals are included in the new regulations. The PIG and gross activity measurement results will be compared with investigation levels only and no more used for limitation purposes. (authors).

  17. Pressure-based impact method to count bedload particles

    Science.gov (United States)

    Antico, Federica; Mendes, Luís; Aleixo, Rui; Ferreira, Rui M. L.

    2017-04-01

    -channel flow, was analysed. All tests featured a period of 90 s data collection. For a detailed description of the laboratory facilities and test conditions see Mendes et al. (2016). Results from MiCas system were compared with those of obtained from the analysis of a high-speed video footage. The obtained results shown a good agreement between both techniques. The measurements carried out allowed to determine that MiCas system is able to track particle impact in real-time within an error margin of 2.0%. From different tests with the same conditions it was possible to determine the repeatability of MiCas system. Derived quantities such as bedload transport rates, eulerian auto-correlation functions and structure functions are also in close agreement with measurements based on optical methods. The main advantages of MiCas system relatively to digital image processing methods are: a) independence from optical access, thus avoiding problems with light intensity variations and oscillating free surfaces; b) small volume of data associated to particle counting, which allows for the possibility of acquiring very long data series (hours, days) of particle impacts. In the considered cases, it would take more than two hours to generate 1 MB of data. For the current validation tests, 90 s acquisition time generated 25 Gb of images but 11 kB of MiCas data. On the other hand the time necessary to process the digital images may correspond to days, effectively limiting its usage to small time series. c) the possibility of real-time measurements, allowing for detection of problems during the experiments and minimizing some post-processing steps. This research was partially supported by Portuguese and European funds, within programs COMPETE2020 and PORL-FEDER, through project PTDC/ECM-HID/6387/2014 granted by the National Foundation for Science and Technology (FCT). References Mendes L., Antico F., Sanches P., Alegria F., Aleixo R., and Ferreira RML. (2016). A particle counting system for

  18. Limits in point to point resolution of MOS based pixels detector arrays

    Science.gov (United States)

    Fourches, N.; Desforge, D.; Kebbiri, M.; Kumar, V.; Serruys, Y.; Gutierrez, G.; Leprêtre, F.; Jomard, F.

    2018-01-01

    In high energy physics point-to-point resolution is a key prerequisite for particle detector pixel arrays. Current and future experiments require the development of inner-detectors able to resolve the tracks of particles down to the micron range. Present-day technologies, although not fully implemented in actual detectors, can reach a 5-μm limit, this limit being based on statistical measurements, with a pixel-pitch in the 10 μm range. This paper is devoted to the evaluation of the building blocks for use in pixel arrays enabling accurate tracking of charged particles. Basing us on simulations we will make here a quantitative evaluation of the physical and technological limits in pixel size. Attempts to design small pixels based on SOI technology will be briefly recalled here. A design based on CMOS compatible technologies that allow a reduction of the pixel size below the micrometer is introduced here. Its physical principle relies on a buried carrier-localizing collecting gate. The fabrication process needed by this pixel design can be based on existing process steps used in silicon microelectronics. The pixel characteristics will be discussed as well as the design of pixel arrays. The existing bottlenecks and how to overcome them will be discussed in the light of recent ion implantation and material characterization experiments.

  19. Ranking Hospitals Based on Colon Surgery and Abdominal Hysterectomy Surgical Site Infection Outcomes: Impact of Limiting Surveillance to the Operative Hospital.

    Science.gov (United States)

    Yokoe, Deborah S; Avery, Taliser R; Platt, Richard; Kleinman, Ken; Huang, Susan S

    2018-03-16

    Hospital-specific surgical site infection (SSI) performance following colon surgery and abdominal hysterectomies can impact hospitals' relative rankings around quality metrics used to determine financial penalties. Current SSI surveillance largely focuses on SSI detected at the operative hospital. Retrospective cohort study to assess the impact on hospitals' relative SSI performance rankings when SSI detected at non-operative hospitals are included. We utilized data from a California statewide hospital registry to assess for evidence of SSI following colon surgery or abdominal hysterectomies performed 3/1/2011-11/30/2013 using previously validated claims-based SSI surveillance methods. Risk-adjusted hospital-specific rankings based on SSI detected at operative hospitals versus any California hospital were generated. Among 60,059 colon surgeries at 285 hospitals and 64,918 abdominal hysterectomies at 270 hospitals, 5,921 (9.9%) colon surgeries and 1,481 (2.3%) abdominal hysterectomies received a diagnosis code for SSI within the 30 days following surgery. 7.2% of colon surgery and 13.4% of abdominal hysterectomy SSI would have been missed by operative hospital surveillance alone. The proportion of individual hospital's SSI detected during hospitalizations at other hospitals varied widely. Including non-operative hospital SSI resulted in improved relative ranking of 11 (3.9%) colon surgery and 13 (4.8%) hysterectomy hospitals so that they were no longer in the worst performing quartile, mainly among hospitals with relatively high surgical volumes. Standard SSI surveillance that mainly focuses on infections detected at the operative hospital causes varying degrees of SSI under-estimation, leading to inaccurate assignment or avoidance of financial penalties for approximately one in eleven to sixteen hospitals.

  20. The impact of mass transfer limitations on size distributions of particle associated SVOCs in outdoor and indoor environments

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Cong; Zhang, Yinping [Department of Building Science, Tsinghua University, Beijing (China); Weschler, Charles J., E-mail: weschlch@rwjms.rutgers.edu [Department of Building Science, Tsinghua University, Beijing (China); Environmental and Occupational Health Sciences Institute, Rutgers University, Piscataway, NJ (United States); International Center for Indoor Environment and Energy, Technical University of Denmark, Lyngby (Denmark)

    2014-11-01

    Semi-volatile organic compounds (SVOCs) partition between the gas phase and airborne particles. The size distribution of particle-associated SVOCs impacts their fate in outdoor and indoor environments, as well as human exposure to these compounds and subsequent health risks. Allen et al. (1996) previously proposed that the rate of mass transfer can impact polycyclic aromatic hydrocarbon (PAH) partitioning among different sized particles, especially for time scales relevant to urban aerosols. The present study quantitatively builds on this idea, presenting a model that incorporates dynamic SVOC/particle interaction and applying this model to typical outdoor and indoor scenarios. The model indicates that the impact of mass transfer limitations on the size distribution of a particle-associated SVOC can be evaluated by the ratio of the time to achieve gas–particle equilibrium relative to the residence time of particles. The higher this ratio, the greater the influence of mass transfer limitations on the size distribution of particle-associated SVOCs. The influence of such constraints is largest on the fraction of particle-associated SVOCs in the coarse mode (> 2 μm). Predictions from the model have been found to be in reasonable agreement with size distributions measured for PAHs at roadside and suburban locations in Japan. The model also quantitatively explains shifts in the size distributions of particle associated SVOCs compared to those for particle mass, and the manner in which these shifts vary with temperature and an SVOC's molecular weight. - Highlights: • Rate of mass transfer can impact SVOC partitioning among different sized particles. • Model was developed that incorporates dynamic SVOC/particle sorption. • Key parameters: mass-transfer coefficients, partition coefficient, residence time • Model explains observed SVOC size distribution shifts with temperature and MW. • Largest impact of mass transfer constraints: SVOC sorption to coarse

  1. Advantages and limitations of exergy indicators to assess sustainability of bioenergy and biobased materials

    International Nuclear Information System (INIS)

    Maes, Dries; Van Passel, Steven

    2014-01-01

    Innovative bioenergy projects show a growing diversity in biomass pathways, transformation technologies and end-products, leading to complex new processes. Existing energy-based indicators are not designed to include multiple impacts and are too constrained to assess the sustainability of these processes. Alternatively, indicators based on exergy, a measure of “qualitative energy”, could allow a more holistic view. Exergy is increasingly applied in analyses of both technical and biological processes. But sustainability assessments including exergy calculations, are not very common and are not generally applicable to all types of impact. Hence it is important to frame the use of exergy for inclusion in a sustainability assessment. This paper reviews the potentials and the limitations of exergy calculations, and presents solutions for coherent aggregation with other metrics. The resulting approach is illustrated in a case study. Within the context of sustainability assessment of bioenergy, exergy is a suitable metric for the impacts that require an ecocentric interpretation, and it allows aggregation on a physical basis. The use of exergy is limited to a measurement of material and energy exchanges with the sun, biosphere and lithosphere. Exchanges involving services or human choices are to be measured in different metrics. This combination provides a more inclusive and objective sustainability assessment, especially compared to standard energy- or carbon-based indicators. Future applications of this approach in different situations are required to clarify the potential of exergy-based indicators in a sustainability context. -- Highlights: • Innovative bioenergy projects require more advanced sustainability assessments to incorporate all environmental impacts. • Exergy-based indicators provide solutions for objective and robust measurements. • The use of exergy in a sustainability assessment is limited to material exchanges, excluding exchanges with society

  2. Theoretical Analysis of the Dynamic Properties of a 2-2 Cement-Based Piezoelectric Dual-Layer Stacked Sensor under Impact Load

    Directory of Open Access Journals (Sweden)

    Taotao Zhang

    2017-05-01

    Full Text Available Cement-based piezoelectric materials are widely used due to the fact that compared with common smart materials, they overcome the defects of structure-incompatibility and frequency inconsistency with a concrete structure. However, the present understanding of the mechanical behavior of cement-based piezoelectric smart materials under impact load is still limited. The dynamic characteristics under impact load are of importance, for example, for studying the anti-collision properties of engineering structures and aircraft takeoff-landing safety. Therefore, in this paper, an analytical model was proposed to investigate the dynamic properties of a 2-2 cement-based piezoelectric dual-layer stacked sensor under impact load based on the piezoelectric effect. Theoretical solutions are obtained by utilizing the variable separation and Duhamel integral method. To simulate the impact load and verify the theory, three types of loads, including atransient step load, isosceles triangle load and haversine wave load, are considered and the comparisons between the theoretical results, Li’s results and numerical results are presented by using the control variate method and good agreement is found. Furthermore, the influences of several parameters were discussed and other conclusions about this sensor are also given. This should prove very helpful for the design and optimization of the 2-2 cement-based piezoelectric dual-layer stacked sensor in engineering.

  3. Evaluating the impacts of farmers' behaviors on a hypothetical agricultural water market based on double auction

    Science.gov (United States)

    Du, Erhu; Cai, Ximing; Brozović, Nicholas; Minsker, Barbara

    2017-05-01

    Agricultural water markets are considered effective instruments to mitigate the impacts of water scarcity and to increase crop production. However, previous studies have limited understanding of how farmers' behaviors affect the performance of water markets. This study develops an agent-based model to explicitly incorporate farmers' behaviors, namely irrigation behavior (represented by farmers' sensitivity to soil water deficit λ) and bidding behavior (represented by farmers' rent seeking μ and learning rate β), in a hypothetical water market based on a double auction. The model is applied to the Guadalupe River Basin in Texas to simulate a hypothetical agricultural water market under various hydrological conditions. It is found that the joint impacts of the behavioral parameters on the water market are strong and complex. In particular, among the three behavioral parameters, λ affects the water market potential and its impacts on the performance of the water market are significant under most scenarios. The impacts of μ or β on the performance of the water market depend on the other two parameters. The water market could significantly increase crop production only when the following conditions are satisfied: (1) λ is small and (2) μ is small and/or β is large. The first condition requires efficient irrigation scheduling, and the second requires well-developed water market institutions that provide incentives to bid true valuation of water permits.

  4. Proposed Robust Entanglement-Based Magnetic Field Sensor Beyond the Standard Quantum Limit.

    Science.gov (United States)

    Tanaka, Tohru; Knott, Paul; Matsuzaki, Yuichiro; Dooley, Shane; Yamaguchi, Hiroshi; Munro, William J; Saito, Shiro

    2015-10-23

    Recently, there have been significant developments in entanglement-based quantum metrology. However, entanglement is fragile against experimental imperfections, and quantum sensing to beat the standard quantum limit in scaling has not yet been achieved in realistic systems. Here, we show that it is possible to overcome such restrictions so that one can sense a magnetic field with an accuracy beyond the standard quantum limit even under the effect of decoherence, by using a realistic entangled state that can be easily created even with current technology. Our scheme could pave the way for the realizations of practical entanglement-based magnetic field sensors.

  5. Development of a multilocus-based approach for sponge (phylum Porifera) identification: refinement and limitations.

    Science.gov (United States)

    Yang, Qi; Franco, Christopher M M; Sorokin, Shirley J; Zhang, Wei

    2017-02-02

    For sponges (phylum Porifera), there is no reliable molecular protocol available for species identification. To address this gap, we developed a multilocus-based Sponge Identification Protocol (SIP) validated by a sample of 37 sponge species belonging to 10 orders from South Australia. The universal barcode COI mtDNA, 28S rRNA gene (D3-D5), and the nuclear ITS1-5.8S-ITS2 region were evaluated for their suitability and capacity for sponge identification. The highest Bit Score was applied to infer the identity. The reliability of SIP was validated by phylogenetic analysis. The 28S rRNA gene and COI mtDNA performed better than the ITS region in classifying sponges at various taxonomic levels. A major limitation is that the databases are not well populated and possess low diversity, making it difficult to conduct the molecular identification protocol. The identification is also impacted by the accuracy of the morphological classification of the sponges whose sequences have been submitted to the database. Re-examination of the morphological identification further demonstrated and improved the reliability of sponge identification by SIP. Integrated with morphological identification, the multilocus-based SIP offers an improved protocol for more reliable and effective sponge identification, by coupling the accuracy of different DNA markers.

  6. Impact of evidence-based interventions on wound complications after cesarean delivery.

    Science.gov (United States)

    Temming, Lorene A; Raghuraman, Nandini; Carter, Ebony B; Stout, Molly J; Rampersad, Roxane M; Macones, George A; Cahill, Alison G; Tuuli, Methodius G

    2017-10-01

    A number of evidence-based interventions have been proposed to reduce post-cesarean delivery wound complications. Examples of such interventions include appropriate timing of preoperative antibiotics, appropriate choice of skin antisepsis, closure of the subcutaneous layer if subcutaneous depth is ≥2 cm, and subcuticular skin closure with suture rather than staples. However, the collective impact of these measures is unclear. We sought to estimate the impact of a group of evidence-based surgical measures (prophylactic antibiotics administered before skin incision, chlorhexidine-alcohol for skin antisepsis, closure of subcutaneous layer, and subcuticular skin closure with suture) on wound complications after cesarean delivery and to estimate residual risk factors for wound complications. We conducted a secondary analysis of data from a randomized controlled trial of chlorhexidine-alcohol vs iodine-alcohol for skin antisepsis at cesarean delivery from 2011-2015. The primary outcome for this analysis was a composite of wound complications that included surgical site infection, cellulitis, seroma, hematoma, and separation within 30 days. Risk of wound complications in women who received all 4 evidence-based measures (prophylactic antibiotics within 60 minutes of cesarean delivery and before skin incision, chlorhexidine-alcohol for skin antisepsis with 3 minutes of drying time before incision, closure of subcutaneous layer if ≥2 cm of depth, and subcuticular skin closure with suture) were compared with those women who did not. We performed logistic regression analysis limited to patients who received all the evidence-based measures to estimate residual risk factors for wound complications and surgical site infection. Of 1082 patients with follow-up data, 349 (32.3%) received all the evidence-based measures, and 733 (67.7%) did not. The risk of wound complications was significantly lower in patients who received all the evidence-based measures compared with those who

  7. Bottom-up communication. Identifying opportunities and limitations through an exploratory field-based evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, C.; Irvine, K.N. [Institute of Energy and Sustainable Development, De Montfort University, Leicester, LE1 9BH (United Kingdom)

    2013-02-15

    Communication to promote behaviours like energy saving can use significant resources. What is less clear is the comparative value of different approaches available to communicators. While it is generally agreed that 'bottom-up' approaches, where individuals are actively involved rather than passive, are preferable to 'top-down' authority-led projects, there is a dearth of evidence that verifies why this should be. Additionally, while the literature has examined the mechanics of the different approaches, there has been less attention paid to the associated psychological implications. This paper reports on an exploratory comparative study that examined the effects of six distinct communication activities. The activities used different communication approaches, some participative and others more top-down informational. Two theories, from behavioural studies and communication, were used to identify key variables for consideration in this field-based evaluation. The evaluation aimed to assess not just which activity might be most successful, as this has limited generalisability, but to also gain insight into what psychological impacts might contribute to success. Analysis found support for the general hypothesis that bottom-up approaches have more impact on behaviour change than top-down. The study also identified that, in this instance, the difference in reported behaviour across the activities related partly to the extent to which intentions to change behaviour were implemented. One possible explanation for the difference in reported behaviour change across the activities is that a bottom-up approach may offer a supportive environment where participants can discuss progress with like-minded individuals. A further possible explanation is that despite controlling for intention at an individual level, the pre-existence of strong intentions may have an effect on group success. These suggestive findings point toward the critical need for additional and larger-scale studies

  8. Impact parameter representation without high-energy, small-angle limitation

    International Nuclear Information System (INIS)

    Islam, M.M.

    Using Watson-Sommerfeld transform the impact parameter representation of the scattering amplitude is shown to be valid for all physical energies and scattering angles. It is also shown how the direct channel Regge poles enter in the impact parameter amplitude [fr

  9. A Comparative Study Between Strain And Stress Based Forming Limit Analysis By Applying Several Phenomenological Yield Criteria

    International Nuclear Information System (INIS)

    Butuc, Marilena C.; Vincze, Gabriela T.; Gracio, Jose J.; Barata da Rocha, A.

    2005-01-01

    The present work aims at analyzing a comparative study between the strain-based forming limit criterion (FLD) and the stress-based forming limit criterion (FLSD), under linear and complex strain paths. The selected material is an AA5182-0 aluminium alloy. Some relevant remarks about stress-based forming limit criterion concept are presented

  10. Impact of Carbon Quota Allocation Mechanism on Emissions Trading: An Agent-Based Simulation

    Directory of Open Access Journals (Sweden)

    Wei Jiang

    2016-08-01

    Full Text Available This paper establishes an agent-based simulation system of the carbon emissions trading in accordance with the complex feature of the trading process. This system analyzes the impact of the carbon quota allocation mechanism on emissions trading for three different aspects including the amount of emissions reduction, the economic effect on the emitters, and the emissions reduction cost. Based on the data of the carbon emissions of different industries in China, several simulations were made. The results indicate that the emissions trading policy can effectively reduce carbon emissions in a perfectly competitive market. Moreover, by comparing separate quota allocation mechanisms, we obtain the result that the scheme with a small extent quota decrease in a comprehensive allocation mechanism can minimize the unit carbon emission cost. Implementing this scheme can also achieve minimal effects of carbon emissions limitation on the economy on the basis that the environment is not destroyed. However, excessive quota decrease cannot promote the emitters to reduce emission. Taking into account that several developing countries have the dual task of limiting carbon emissions and developing the economy, it is necessary to adopt a comprehensive allocation mechanism of the carbon quota and increase the initial proportion of free allocation.

  11. A Modified Limited-Memory BNS Method for Unconstrained Minimization Based on the Conjugate Directions Idea

    Czech Academy of Sciences Publication Activity Database

    Vlček, Jan; Lukšan, Ladislav

    2015-01-01

    Roč. 30, č. 3 (2015), s. 616-633 ISSN 1055-6788 R&D Projects: GA ČR GA13-06684S Institutional support: RVO:67985807 Keywords : unconstrained minimization * variable metric methods * limited-memory methods * the BFGS update * conjugate directions * numerical results Subject RIV: BA - General Mathematics Impact factor: 0.841, year: 2015

  12. Differences conception prospective students teacher about limit of function based gender

    Science.gov (United States)

    Usman, Juniati, Dwi; Siswono, Tatag Yuli Eko

    2017-08-01

    Gender is one of the interesting topics and has continuity to be explored in mathematics education research. The purpose of this study to explore difference on conceptions of students teaching program by gender. It specialized on conception of understanding, representating, and mental images about limit function. This research conducting qualitative explorative method approach. The subject consisted of one man and one woman from the group of highly skilled student and has gone through semester V. Based on data that had been analyzed proved that male student has an understanding about limit function shared by explaining this material using illustrations, while female student explained it through verbal explanation. Due to representating aspect, it revealed that both of male and female students have similarity such as using verbal explanation, graphs, symbols, and tables to representating about limit function. Analyzing Mental image aspect, researcher got that male student using word "to converge" to explained about limit function, while female student using word "to approach". So, there are differences conceptions about limit function between male and female student.

  13. Determination of water environment standards based on water quality criteria in China: Limitations and feasibilities.

    Science.gov (United States)

    Wang, Tieyu; Zhou, Yunqiao; Bi, Cencen; Lu, Yonglong; He, Guizhen; Giesy, John P

    2017-07-01

    There is a need to formulate water environment standards (WESs) from the current water quality criteria (WQC) in China. To this end, we briefly summarize typical mechanisms applied in several countries with longer histories of developing WESs, and three limitations to formulating WESs in China were identified. After analyzing the feasibility factors including economic development, scientific support capability and environmental policies, we realized that China is still not ready for a complete change from its current nation-wide unified WES system to a local-standard-based system. Thus, we proposed a framework for transformation from WQC to WESs in China. The framework consists of three parts, including responsibilities, processes and policies. The responsibilities include research authorization, development of guidelines, and collection of information, at both national and local levels; the processes include four steps and an impact factor system to establish water quality standards; and the policies include seven specific proposals. Copyright © 2016. Published by Elsevier B.V.

  14. Technical Limits of ICT for Enterprises' Innovations

    Directory of Open Access Journals (Sweden)

    Radim Brixi

    2012-01-01

    Full Text Available The paper deals with technical limits of ICT for enterprises' innovations. ICT is now a key asset for the competitiveness of enterprises. It became the main stream of doing business well. These days we come to era where enterprises are fully dependant on ICT. We would try to describe more deeply the impacts of such a dependence and underlying problems. In context of the necessary new innovations of enterprises, we will focus more on the negative aspects of being dependent on ICT with the technological architecture of hard systems. Based on the need to apply a systems approach we will also provide a suggestion as to how to model these limits in a system's manner.

  15. Automated laser-based barely visible impact damage detection in honeycomb sandwich composite structures

    International Nuclear Information System (INIS)

    Girolamo, D.; Yuan, F. G.; Girolamo, L.

    2015-01-01

    Nondestructive evaluation (NDE) for detection and quantification of damage in composite materials is fundamental in the assessment of the overall structural integrity of modern aerospace systems. Conventional NDE systems have been extensively used to detect the location and size of damages by propagating ultrasonic waves normal to the surface. However they usually require physical contact with the structure and are time consuming and labor intensive. An automated, contactless laser ultrasonic imaging system for barely visible impact damage (BVID) detection in advanced composite structures has been developed to overcome these limitations. Lamb waves are generated by a Q-switched Nd:YAG laser, raster scanned by a set of galvano-mirrors over the damaged area. The out-of-plane vibrations are measured through a laser Doppler Vibrometer (LDV) that is stationary at a point on the corner of the grid. The ultrasonic wave field of the scanned area is reconstructed in polar coordinates and analyzed for high resolution characterization of impact damage in the composite honeycomb panel. Two methodologies are used for ultrasonic wave-field analysis: scattered wave field analysis (SWA) and standing wave energy analysis (SWEA) in the frequency domain. The SWA is employed for processing the wave field and estimate spatially dependent wavenumber values, related to discontinuities in the structural domain. The SWEA algorithm extracts standing waves trapped within damaged areas and, by studying the spectrum of the standing wave field, returns high fidelity damage imaging. While the SWA can be used to locate the impact damage in the honeycomb panel, the SWEA produces damage images in good agreement with X-ray computed tomographic (X-ray CT) scans. The results obtained prove that the laser-based nondestructive system is an effective alternative to overcome limitations of conventional NDI technologies

  16. Impact of steam generator start-up limitations on the performance of a parabolic trough solar power plant

    DEFF Research Database (Denmark)

    Ferruzza, Davide; Topel, Monika; Laumert, Björn

    2018-01-01

    typically start-up and shut down every day, so in order to maximize their profitability, it is necessary to increase their flexibility in transient operation and to initiate power generation as rapidly as possible. Two of the key components are the steam generator and steam turbine and the rates at which...... they can reach operational speed are limited by thermo-mechanical constraints. This paper presents an analysis of the effects of the thermal stress limitations of the steam generator and steam turbine on the power plant start-up, and quantifies their impact on the economy of the system. A dynamic model......-driven and peak-load. The results indicate that for steam generator hot start-ups, a 1.5% increase in peak-load electricity production would be achieved by doubling the maximum allowable heating rate of the evaporator. No useful increase would be achieved by increasing the rates beyond a limit of 7–8 K...

  17. Differential climate impacts for policy-relevant limits to global warming: the case of 1.5 °C and 2 °C

    Science.gov (United States)

    Schleussner, Carl-Friedrich; Lissner, Tabea K.; Fischer, Erich M.; Wohland, Jan; Perrette, Mahé; Golly, Antonius; Rogelj, Joeri; Childers, Katelin; Schewe, Jacob; Frieler, Katja; Mengel, Matthias; Hare, William; Schaeffer, Michiel

    2016-04-01

    Robust appraisals of climate impacts at different levels of global-mean temperature increase are vital to guide assessments of dangerous anthropogenic interference with the climate system. The 2015 Paris Agreement includes a two-headed temperature goal: "holding the increase in the global average temperature to well below 2 °C above pre-industrial levels and pursuing efforts to limit the temperature increase to 1.5 °C". Despite the prominence of these two temperature limits, a comprehensive overview of the differences in climate impacts at these levels is still missing. Here we provide an assessment of key impacts of climate change at warming levels of 1.5 °C and 2 °C, including extreme weather events, water availability, agricultural yields, sea-level rise and risk of coral reef loss. Our results reveal substantial differences in impacts between a 1.5 °C and 2 °C warming that are highly relevant for the assessment of dangerous anthropogenic interference with the climate system. For heat-related extremes, the additional 0.5 °C increase in global-mean temperature marks the difference between events at the upper limit of present-day natural variability and a new climate regime, particularly in tropical regions. Similarly, this warming difference is likely to be decisive for the future of tropical coral reefs. In a scenario with an end-of-century warming of 2 °C, virtually all tropical coral reefs are projected to be at risk of severe degradation due to temperature-induced bleaching from 2050 onwards. This fraction is reduced to about 90 % in 2050 and projected to decline to 70 % by 2100 for a 1.5 °C scenario. Analyses of precipitation-related impacts reveal distinct regional differences and hot-spots of change emerge. Regional reduction in median water availability for the Mediterranean is found to nearly double from 9 % to 17 % between 1.5 °C and 2 °C, and the projected lengthening of regional dry spells increases from 7 to 11 %. Projections for

  18. Generalizations of the limited-memory BFGS method based on the quasi-product form of update

    Czech Academy of Sciences Publication Activity Database

    Vlček, Jan; Lukšan, Ladislav

    2013-01-01

    Roč. 241, 15 March (2013), s. 116-129 ISSN 0377-0427 R&D Projects: GA ČR GA201/09/1957 Institutional research plan: CEZ:AV0Z10300504 Keywords : unconstrained minimization * variable metric methods * limited-memory methods * Broyden class updates * global convergence * numerical results Subject RIV: BA - General Mathematics Impact factor: 1.077, year: 2013

  19. Impact of community-based interventions on HIV knowledge, attitudes, and transmission.

    Science.gov (United States)

    Salam, Rehana A; Haroon, Sarah; Ahmed, Hashim H; Das, Jai K; Bhutta, Zulfiqar A

    2014-01-01

    In 2012, an estimated 35.3 million people lived with HIV, while approximately two million new HIV infections were reported. Community-based interventions (CBIs) for the prevention and control of HIV allow increased access and ease availability of medical care to population at risk, or already infected with, HIV. This paper evaluates the impact of CBIs on HIV knowledge, attitudes, and transmission. We included 39 studies on educational activities, counseling sessions, home visits, mentoring, women's groups, peer leadership, and street outreach activities in community settings that aimed to increase awareness on HIV/AIDS risk factors and ensure treatment adherence. Our review findings suggest that CBIs to increase HIV awareness and risk reduction are effective in improving knowledge, attitudes, and practice outcomes as evidenced by the increased knowledge scores for HIV/AIDS (SMD: 0.66, 95% CI: 0.25, 1.07), protected sexual encounters (RR: 1.19, 95% CI: 1.13, 1.25), condom use (SMD: 0.96, 95% CI: 0.03, 1.58), and decreased frequency of sexual intercourse (RR: 0.76, 95% CI: 0.61, 0.96). Analysis shows that CBIs did not have any significant impact on scores for self-efficacy and communication. We found very limited evidence on community-based management for HIV infected population and prevention of mother- to-child transmission (MTCT) for HIV-infected pregnant women. Qualitative synthesis suggests that establishment of community support at the onset of HIV prevention programs leads to community acceptance and engagement. School-based delivery of HIV prevention education and contraceptive distribution have also been advocated as potential strategies to target high-risk youth group. Future studies should focus on evaluating the effectiveness of community delivery platforms for prevention of MTCT, and various emerging models of care to improve morbidity and mortality outcomes.

  20. Exploring policy impacts for servicising in product-based markets : A generic agent-based model

    NARCIS (Netherlands)

    van der Veen, R.A.C.; Kisjes, K.H.; Nikolic, I.

    2017-01-01

    The shift to markets based on servicising, i.e. market-level transitions from product-based to service-based production and consumption patterns, may contribute to achieve absolute decoupling, i.e. the combined development of economic growth and environmental impact reduction. However, the

  1. Impact of community-based support services on antiretroviral treatment programme delivery and outcomes in resource-limited countries: a synthetic review

    Directory of Open Access Journals (Sweden)

    Wouters Edwin

    2012-07-01

    Full Text Available Abstract Background Task-shifting to lay community health providers is increasingly suggested as a potential strategy to overcome the barriers to sustainable antiretroviral treatment (ART scale-up in high-HIV-prevalence, resource-limited settings. The dearth of systematic scientific evidence on the contributory role and function of these forms of community mobilisation has rendered a formal evaluation of the published results of existing community support programmes a research priority. Methods We reviewed the relevant published work for the period from November 2003 to December 2011 in accordance with the guidelines for a synthetic review. ISI Web of Knowledge, Science Direct, BioMed Central, OVID Medline, PubMed, Social Services Abstracts, and Sociological Abstracts and a number of relevant websites were searched. Results The reviewed literature reported an unambiguous positive impact of community support on a wide range of aspects, including access, coverage, adherence, virological and immunological outcomes, patient retention and survival. Looking at the mechanisms through which community support can impact ART programmes, the review indicates that community support initiatives are a promising strategy to address five often cited challenges to ART scale-up, namely (1 the lack of integration of ART services into the general health system; (2 the growing need for comprehensive care, (3 patient empowerment, (4 and defaulter tracing; and (5 the crippling shortage in human resources for health. The literature indicates that by linking HIV/AIDS-care to other primary health care programmes, by providing psychosocial care in addition to the technical-medical care from nurses and doctors, by empowering patients towards self-management and by tracing defaulters, well-organised community support initiatives are a vital part of any sustainable public-sector ART programme. Conclusions The review demonstrates that community support initiatives are a

  2. Credit card spending limit and personal finance: system dynamics approach

    Directory of Open Access Journals (Sweden)

    Mirjana Pejić Bach

    2014-03-01

    Full Text Available Credit cards have become one of the major ways for conducting cashless transactions. However, they have a long term impact on the well being of their owner through the debt generated by credit card usage. Credit card issuers approve high credit limits to credit card owners, thereby influencing their credit burden. A system dynamics model has been used to model behavior of a credit card owner in different scenarios according to the size of a credit limit. Experiments with the model demonstrated that a higher credit limit approved on the credit card decreases the budget available for spending in the long run. This is a contribution toward the evaluation of action for credit limit control based on their consequences.

  3. Modeling the 2016-2017 Yemen Cholera Outbreak with the Impact of Limited Medical Resources.

    Science.gov (United States)

    He, Daihai; Wang, Xueying; Gao, Daozhou; Wang, Jin

    2018-05-01

    We present a mathematical model to investigate the transmission dynamics of the 2016-2017 Yemen Cholera Outbreak. Our model describes the interaction between the human hosts and the pathogenic bacteria, under the impact of limited medical resources. We fit our model to Yemen epidemic data published by the World Health Organization, at both the country and regional levels. We find that the Yemen cholera outbreak is shaped by the interplay of environmental, socioeconomic, and climatic factors. Our results suggest that improvement of the public health system and strategic implementation of control measures with respect to time and location are key to future cholera prevention and intervention in Yemen. Copyright © 2018. Published by Elsevier Ltd.

  4. The association between muscle strength and activity limitations in patients with the hypermobility type of Ehlers-Danlos syndrome: the impact of proprioception.

    Science.gov (United States)

    Scheper, Mark; Rombaut, Lies; de Vries, Janneke; De Wandele, Inge; van der Esch, Martin; Visser, Bart; Malfait, Franciska; Calders, Patrick; Engelbert, Raoul

    2017-07-01

    The patients diagnosed with Ehlers-Danlos Syndrome Hypermobility Type (EDS-HT) are characterized by pain, proprioceptive inacuity, muscle weakness, potentially leading to activity limitations. In EDS-HT, a direct relationship between muscle strength, proprioception and activity limitations has never been studied. The objective of the study was to establish the association between muscle strength and activity limitations and the impact of proprioception on this association in EDS-HT patients. Twenty-four EDS-HT patients were compared with 24 controls. Activity limitations were quantified by Health Assessment Questionnaire (HAQ), Six-Minute Walk test (6MWT) and 30-s chair-rise test (30CRT). Muscle strength was quantified by handheld dynamometry. Proprioception was quantified by movement detection paradigm. In analyses, the association between muscle strength and activity limitations was controlled for proprioception and confounders. Muscle strength was associated with 30CRT (r = 0.67, p = <0.001), 6MWT (r = 0.58, p = <0.001) and HAQ (r = 0.63, p= <0.001). Proprioception was associated with 30CRT (r = 0.55, p < 0.001), 6MWT (r = 0.40, p = <0.05) and HAQ (r = 0.46, p < 0.05). Muscle strength was found to be associated with activity limitations, however, proprioceptive inacuity confounded this association. Muscle strength is associated with activity limitations in EDS-HT patients. Joint proprioception is of influence on this association and should be considered in the development of new treatment strategies for patients with EDS-HT. Implications for rehabilitation Reducing activity limitations by enhancing muscle strength is frequently applied in the treatment of EDS-HT patients. Although evidence regarding treatment efficacy is scarce, the current paper confirms the rationality that muscle strength is an important factor in the occurrence of activity limitations in EDS-HT patients. Although muscle strength is the most

  5. Strain- and stress-based forming limit curves for DP 590 steel sheet using Marciniak-Kuczynski method

    Science.gov (United States)

    Kumar, Gautam; Maji, Kuntal

    2018-04-01

    This article deals with the prediction of strain-and stress-based forming limit curves for advanced high strength steel DP590 sheet using Marciniak-Kuczynski (M-K) method. Three yield criteria namely Von-Mises, Hill's 48 and Yld2000-2d and two hardening laws i.e., Hollomon power and Swift hardening laws were considered to predict the forming limit curves (FLCs) for DP590 steel sheet. The effects of imperfection factor and initial groove angle on prediction of FLC were also investigated. It was observed that the FLCs shifted upward with the increase of imperfection factor value. The initial groove angle was found to have significant effects on limit strains in the left side of FLC, and insignificant effect for the right side of FLC for certain range of strain paths. The limit strains were calculated at zero groove angle for the right side of FLC, and a critical groove angle was used for the left side of FLC. The numerically predicted FLCs considering the different combinations of yield criteria and hardening laws were compared with the published experimental results of FLCs for DP590 steel sheet. The FLC predicted using the combination of Yld2000-2d yield criterion and swift hardening law was in better coorelation with the experimental data. Stress based forming limit curves (SFLCs) were also calculated from the limiting strain values obtained by M-K model. Theoretically predicted SFLCs were compared with that obtained from the experimental forming limit strains. Stress based forming limit curves were seen to better represent the forming limits of DP590 steel sheet compared to that by strain-based forming limit curves.

  6. Impact fretting wear in CO2-based environments

    International Nuclear Information System (INIS)

    Levy, G.; Morri, J.

    1985-01-01

    An impact wear model, based on the load-sliding distance proportionality of wear and the mechanical response of the impacting bodies, was derived and tested against experiment. The experimental work was carried out on a twin vibrator rig capable of repetitive impact of a moving specimen against a stationary target material. The impact wear characteristics of three materials (mild steel, 9Cr-1Mo steel and austenitic 316 steel) against 310 stainless steel were examined over a range of temperatures (18-600 0 C). Additionally the effects of variations in the mechanical parameters (incident energy, ξ i , number N of impacts and angle of incidence φ) as a function of temperature were evaluated for mild steel only. The model was verified for impacting within a stable wear regime at 100 0 C for 9Cr-1Mo steel. The emergence of a severe-to-mild wear transition at elevated temperatures (200-400 0 C), however, introduced an energy and a 'numbers of cycles' effect that caused apparent deviations from theory. It was concluded that for stable single-mechanism wear regimes (metallic, oxidative etc.) oblique elastic impacts with a gross slip component were accurately described by the proposed impact wear model. (orig.)

  7. Mixed H2/H∞-Based Fusion Estimation for Energy-Limited Multi-Sensors in Wearable Body Networks

    Directory of Open Access Journals (Sweden)

    Chao Li

    2017-12-01

    Full Text Available In wireless sensor networks, sensor nodes collect plenty of data for each time period. If all of data are transmitted to a Fusion Center (FC, the power of sensor node would run out rapidly. On the other hand, the data also needs a filter to remove the noise. Therefore, an efficient fusion estimation model, which can save the energy of the sensor nodes while maintaining higher accuracy, is needed. This paper proposes a novel mixed H2/H∞-based energy-efficient fusion estimation model (MHEEFE for energy-limited Wearable Body Networks. In the proposed model, the communication cost is firstly reduced efficiently while keeping the estimation accuracy. Then, the parameters in quantization method are discussed, and we confirm them by an optimization method with some prior knowledge. Besides, some calculation methods of important parameters are researched which make the final estimates more stable. Finally, an iteration-based weight calculation algorithm is presented, which can improve the fault tolerance of the final estimate. In the simulation, the impacts of some pivotal parameters are discussed. Meanwhile, compared with the other related models, the MHEEFE shows a better performance in accuracy, energy-efficiency and fault tolerance.

  8. The Impact of Cultural Dimensions on Islamic Students’ Attitude Towards Problem-Based Learning

    Directory of Open Access Journals (Sweden)

    Esti Zaduqisti

    2016-06-01

    Full Text Available The current study aims to examine the impact of cultural dimensions (i.e., collectivism, power distance, uncertainty avoidance, and masculinity on students’ attitude towards problem-based learning. The design of the current study was a correlational survey, wherein participants were recruited by means of a convenient sampling. Inspection of a multiple regression analysis (N = 549 revealed that collectivism and masculinity positively corresponded with the attitudes. In particular, we found that that the higher the level of collectivism and masculinity, the more students supported the implementation of problem-based learning. In contrast, uncertainty avoidance was negatively related to the attitude in such a way that the higher this cultural dimension, the less students supported problem-based learning. Power distance was the only predictor that did not significantly predict students’ attitude towards problem-based learning. These findings overall suggest the importance of taking into account the characteristics of norms and values people hold within a country that might contribute to the success, feasibility, and  suitability of problem-based learning. Theoretical implications and study limitations of the current findings are discussed, as are practical strategies highlighting on how to deal with cultural potentials and pitfalls in an attempt to promote problem-based learning.

  9. The lower limiting values of collector properties based on core data

    Energy Technology Data Exchange (ETDEWEB)

    Mitrofanov, V P; Tul' bovich, B I

    1982-01-01

    There are numerous methods for determining the lower limiting values of collector properties; which is caused by complexity of studying objects, the utilization of different petrophysical parameters and characteristics of formation productiveness. Based on laboratory studies conducted at PermNIPIneft', two methods of determining the limited values of collector properties were examined with consideration of data from existing literature: 1) from the critical water saturation content K /SUB b/ *; 2) using the phase permeability for kerosene or oil K /SUB prk/. In the first case the value of K /SUB b/ * is determined from the presence of filtering of a two-face flow with the oil fraction not less than 2%. Knowing the value of K /SUB b/ *, the limiting values of collector properties are evaluated by using the petrophysical relationships, which reflect the connection between residual water saturation, permeability for a gas, porosity, the complex parameter ..sqrt.. K /SUB prg/ /K /SUB p/, and also by the effective porosity. In the second case determination of the phase permeability K /SUB prk/ for collectors with low permeability allows one to establish limiting values of collector properties of permeability. Transition to the porosity limit is achieved by the relationship of gas permeability to open or effective porosity. The examining methods for determining lower limiting values of collector properties are used in calculating the reserve of 9 deposits in the Permian region.

  10. 75 FR 70738 - Gulf Oil Limited Partnership; Supplemental Notice That Initial Market-Based Rate Filing Includes...

    Science.gov (United States)

    2010-11-18

    ... Limited Partnership; Supplemental Notice That Initial Market-Based Rate Filing Includes Request for... proceeding of Gulf Oil Limited Partnership's application for market-based rate authority, with an... CFR Part 34, of future issuances of securities and assumptions of liability. Any person desiring to...

  11. Mechanical characteristics of plastic base Ports and impact on flushing efficacy.

    Science.gov (United States)

    Guiffant, Gérard; Flaud, Patrice; Royon, Laurent; Burnet, Espérie; Merckx, Jacques

    2017-01-01

    Three types of totally implantable venous access devices, Ports, are currently in use: titanium, plastic (polyoxymethylene, POM), and mixed (titanium base with a POM shell). Physics theory suggests that the interaction between a non-coring needle (NCN, made of stainless steel) and a plastic base would lead to the stronger material (steel) altering the more malleable material (plastic). To investigate whether needle impacts can alter a plastic base's surface, thus potentially reducing flushing efficacy. A Port made of POM was punctured 200 times with a 19-gauge NCN. Following the existing guidelines, the needle tip pricked the base with each puncture. The Port's base was then examined using a two-dimensional optical instrument, and a bi-dimensional numerical simulation using COMSOL ® was performed to investigate potential surface irregularities and their impact on fluid flow. Each needle impact created a hole (mean depth, 0.12 mm) with a small bump beside it (mean height, 0.02 mm) the Reynolds number Re k ≈10. A numerical simulation of the one hole/bump set showed that the flushing efficacy was 60% that of flushing along a flat surface. In clinical practice, the number of times a Port is punctured depends on patient and treatment characteristics, but each needle impact on the plastic base may increase the risk of decreased flushing effectiveness. Therefore, the more a plastic Port is accessed, the greater the risk of microorganisms, blood products, and medication accumulation. Multiple needle impacts created an irregular surface on the Port's base, which decreased flushing efficacy. Clinical investigation is needed to determine whether plastic base Ports are associated with an increased risk of Port infection and occlusion compared to titanium base Ports.

  12. A framework for modeling scenario-based barrier island storm impacts

    Science.gov (United States)

    Mickey, Rangley; Long, Joseph W.; Dalyander, P. Soupy; Plant, Nathaniel G.; Thompson, David M.

    2018-01-01

    Methods for investigating the vulnerability of existing or proposed coastal features to storm impacts often rely on simplified parametric models or one-dimensional process-based modeling studies that focus on changes to a profile across a dune or barrier island. These simple studies tend to neglect the impacts to curvilinear or alongshore varying island planforms, influence of non-uniform nearshore hydrodynamics and sediment transport, irregular morphology of the offshore bathymetry, and impacts from low magnitude wave events (e.g. cold fronts). Presented here is a framework for simulating regionally specific, low and high magnitude scenario-based storm impacts to assess the alongshore variable vulnerabilities of a coastal feature. Storm scenarios based on historic hydrodynamic conditions were derived and simulated using the process-based morphologic evolution model XBeach. Model results show that the scenarios predicted similar patterns of erosion and overwash when compared to observed qualitative morphologic changes from recent storm events that were not included in the dataset used to build the scenarios. The framework model simulations were capable of predicting specific areas of vulnerability in the existing feature and the results illustrate how this storm vulnerability simulation framework could be used as a tool to help inform the decision-making process for scientists, engineers, and stakeholders involved in coastal zone management or restoration projects.

  13. Ballistic Limit Equation for Single Wall Titanium

    Science.gov (United States)

    Ratliff, J. M.; Christiansen, Eric L.; Bryant, C.

    2009-01-01

    Hypervelocity impact tests and hydrocode simulations were used to determine the ballistic limit equation (BLE) for perforation of a titanium wall, as a function of wall thickness. Two titanium alloys were considered, and separate BLEs were derived for each. Tested wall thicknesses ranged from 0.5mm to 2.0mm. The single-wall damage equation of Cour-Palais [ref. 1] was used to analyze the Ti wall's shielding effectiveness. It was concluded that the Cour-Palais single-wall equation produced a non-conservative prediction of the ballistic limit for the Ti shield. The inaccurate prediction was not a particularly surprising result; the Cour-Palais single-wall BLE contains shield material properties as parameters, but it was formulated only from tests of different aluminum alloys. Single-wall Ti shield tests were run (thicknesses of 2.0 mm, 1.5 mm, 1.0 mm, and 0.5 mm) on Ti 15-3-3-3 material custom cut from rod stock. Hypervelocity impact (HVI) tests were used to establish the failure threshold empirically, using the additional constraint that the damage scales with impact energy, as was indicated by hydrocode simulations. The criterion for shield failure was defined as no detached spall from the shield back surface during HVI. Based on the test results, which confirmed an approximately energy-dependent shield effectiveness, the Cour-Palais equation was modified.

  14. Treating Chronically Ill Diabetic Patients with Limited Life Expectancy: Implications for Performance Measurement

    Science.gov (United States)

    Woodard, LeChauncy D.; Landrum, Cassie R.; Urech, Tracy H.; Profit, Jochen; Virani, Salim S.; Petersen, Laura A.

    2012-01-01

    Background/Objectives To validly assess quality-of-care differences among providers, performance measurement programs must reliably identify and exclude patients for whom the quality indicator may not be desirable, including those with limited life expectancy. We developed an algorithm to identify patients with limited life expectancy and examined the impact of limited life expectancy on glycemic control and treatment intensification among diabetic patients. Design We identified diabetic patients with coexisting congestive heart failure, chronic obstructive pulmonary disease, dementia, end-stage liver disease, and/or primary/metastatic cancers with limited life expectancy. To validate our algorithm, we assessed 5-year mortality among patients identified as having limited life expectancy. We compared rates of meeting performance measures for glycemic control between patients with and without limited life expectancy. Among uncontrolled patients, we examined the impact of limited life expectancy on treatment intensification within 90 days. Setting 110 Veterans Administration facilities; October 2006 – September 2007 Participants 888,628 diabetic patients Measurements Hemoglobin A1c (HbA1c) Quality measurement and performance-based reimbursement systems should acknowledge the different needs of this population. PMID:22260627

  15. ℓ0 Gradient Minimization Based Image Reconstruction for Limited-Angle Computed Tomography.

    Directory of Open Access Journals (Sweden)

    Wei Yu

    Full Text Available In medical and industrial applications of computed tomography (CT imaging, limited by the scanning environment and the risk of excessive X-ray radiation exposure imposed to the patients, reconstructing high quality CT images from limited projection data has become a hot topic. X-ray imaging in limited scanning angular range is an effective imaging modality to reduce the radiation dose to the patients. As the projection data available in this modality are incomplete, limited-angle CT image reconstruction is actually an ill-posed inverse problem. To solve the problem, image reconstructed by conventional filtered back projection (FBP algorithm frequently results in conspicuous streak artifacts and gradual changed artifacts nearby edges. Image reconstruction based on total variation minimization (TVM can significantly reduce streak artifacts in few-view CT, but it suffers from the gradual changed artifacts nearby edges in limited-angle CT. To suppress this kind of artifacts, we develop an image reconstruction algorithm based on ℓ0 gradient minimization for limited-angle CT in this paper. The ℓ0-norm of the image gradient is taken as the regularization function in the framework of developed reconstruction model. We transformed the optimization problem into a few optimization sub-problems and then, solved these sub-problems in the manner of alternating iteration. Numerical experiments are performed to validate the efficiency and the feasibility of the developed algorithm. From the statistical analysis results of the performance evaluations peak signal-to-noise ratio (PSNR and normalized root mean square distance (NRMSD, it shows that there are significant statistical differences between different algorithms from different scanning angular ranges (p<0.0001. From the experimental results, it also indicates that the developed algorithm outperforms classical reconstruction algorithms in suppressing the streak artifacts and the gradual changed

  16. Limits on Large Extra Dimensions Based on Observations of Neutron Stars with the Fermi-LAT

    Energy Technology Data Exchange (ETDEWEB)

    Ajello, M.; /SLAC /KIPAC, Menlo Park; Baldini, L.; /INFN, Pisa; Barbiellini, G.; /INFN, Trieste /Trieste U.; Bastieri, D.; /INFN, Padua /Padua U.; Bechtol, K.; /SLAC /KIPAC, Menlo Park; Bellazzini, R.; /INFN, Pisa; Berenji, B.; /SLAC /KIPAC, Menlo Park; Bloom, E.D.; /SLAC /KIPAC, Menlo Park; Bonamente, E.; /INFN, Perugia /Perugia U.; Borgland, A.W.; /SLAC /KIPAC, Menlo Park; Bregeon, J.; /INFN, Pisa; Brigida, M.; /Bari Polytechnic /INFN, Bari; Bruel, P.; /Ecole Polytechnique; Buehler, R.; /SLAC /KIPAC, Menlo Park; Buson, S.; /INFN, Padua /Padua U.; Caliandro, G.A.; /CSIC, Catalunya; Cameron, R.A.; /SLAC /KIPAC, Menlo Park; Caraveo, P.A.; /Brera Observ.; Casandjian, J.M.; /AIM, Saclay; Cecchi, C.; /INFN, Perugia /Perugia U.; Charles, E.; /SLAC /KIPAC, Menlo Park /Naval Research Lab, Wash., D.C. /SLAC /KIPAC, Menlo Park /ASDC, Frascati /Perugia U. /SLAC /KIPAC, Menlo Park /Montpellier U. /Stockholm U. /Stockholm U., OKC /Royal Swedish Acad. Sci. /ASDC, Frascati /Udine U. /INFN, Trieste /Bari Polytechnic /INFN, Bari /Naval Research Lab, Wash., D.C. /SLAC /KIPAC, Menlo Park /SLAC /KIPAC, Menlo Park /SLAC /KIPAC, Menlo Park /SLAC /KIPAC, Menlo Park /Bari Polytechnic /INFN, Bari /Ecole Polytechnique /NASA, Goddard /Hiroshima U. /Bari Polytechnic /INFN, Bari /INFN, Bari /ASDC, Frascati /INFN, Perugia /Perugia U. /Bari Polytechnic /INFN, Bari /Bari Polytechnic /INFN, Bari /Bologna Observ. /SLAC /KIPAC, Menlo Park /SLAC /KIPAC, Menlo Park /SLAC /KIPAC, Menlo Park /AIM, Saclay /Alabama U., Huntsville /INFN, Padua; /more authors..

    2012-08-17

    We present limits for the compactification scale in the theory of Large Extra Dimensions (LED) proposed by Arkani-Hamed, Dimopoulos, and Dvali. We use 11 months of data from the Fermi Large Area Telescope (Fermi-LAT) to set gamma ray flux limits for 6 gamma-ray faint neutron stars (NS). To set limits on LED we use the model of Hannestad and Raffelt (HR) that calculates the Kaluza-Klein (KK) graviton production in supernova cores and the large fraction subsequently gravitationally bound around the resulting NS. The predicted decay of the bound KK gravitons to {gamma}{gamma} should contribute to the flux from NSs. Considering 2 to 7 extra dimensions of the same size in the context of the HR model, we use Monte Carlo techniques to calculate the expected differential flux of gamma-rays arising from these KK gravitons, including the effects of the age of the NS, graviton orbit, and absorption of gamma-rays in the magnetosphere of the NS. We compare our Monte Carlo-based differential flux to the experimental differential flux using maximum likelihood techniques to obtain our limits on LED. Our limits are more restrictive than past EGRET-based optimistic limits that do not include these important corrections. Additionally, our limits are more stringent than LHC based limits for 3 or fewer LED, and comparable for 4 LED. We conclude that if the effective Planck scale is around a TeV, then for 2 or 3 LED the compactification topology must be more complicated than a torus.

  17. Impact limiters for radioactive materials transport packagings: a methodology for assessment

    International Nuclear Information System (INIS)

    Mourao, Rogerio Pimenta

    2002-01-01

    This work aims at establishing a methodology for design assessment of a cellular material-filled impact limiter to be used as part of a radioactive material transport packaging. This methodology comprises the selection of the cellular material, its structural characterization by mechanical tests, the development of a case study in the nuclear field, preliminary determination of the best cellular material density for the case study, performance of the case and its numerical simulation using the finite element method. Among the several materials used as shock absorbers in packagings, the polyurethane foam was chosen, particularly the foam obtained from the castor oil plant (Ricinus communis), a non-polluting and renewable source. The case study carried out was the 9 m drop test of a package prototype containing radioactive wastes incorporated in a cement matrix, considered one of the most severe tests prescribed by the Brazilian and international transport standards. Prototypes with foam density pre-determined as ideal as well as prototypes using lighter and heavier foams were tested for comparison. The results obtained validate the methodology in that expectations regarding the ideal foam density were confirmed by the drop tests and the numerical simulation. (author)

  18. Australia's Unprecedented Future Temperature Extremes Under Paris Limits to Warming

    Science.gov (United States)

    Lewis, Sophie C.; King, Andrew D.; Mitchell, Daniel M.

    2017-10-01

    Record-breaking temperatures can detrimentally impact ecosystems, infrastructure, and human health. Previous studies show that climate change has influenced some observed extremes, which are expected to become more frequent under enhanced future warming. Understanding the magnitude, as a well as frequency, of such future extremes is critical for limiting detrimental impacts. We focus on temperature changes in Australian regions, including over a major coral reef-building area, and assess the potential magnitude of future extreme temperatures under Paris Agreement global warming targets (1.5°C and 2°C). Under these limits to global mean warming, we determine a set of projected high-magnitude unprecedented Australian temperature extremes. These include extremes unexpected based on observational temperatures, including current record-breaking events. For example, while the difference in global-average warming during the hottest Australian summer and the 2°C Paris target is 1.1°C, extremes of 2.4°C above the observed summer record are simulated. This example represents a more than doubling of the magnitude of extremes, compared with global mean change, and such temperatures are unexpected based on the observed record alone. Projected extremes do not necessarily scale linearly with mean global warming, and this effect demonstrates the significant potential benefits of limiting warming to 1.5°C, compared to 2°C or warmer.

  19. Radionuclide limits for vault disposal at the Savannah River Site

    International Nuclear Information System (INIS)

    Cook, James R.

    1992-01-01

    The Savannah River Site is developing a facility called the E-Area Vaults which will serve as the new radioactive waste disposal facility beginning early in 1992. The facility will employ engineered below-grade concrete vaults for disposal and above grade storage for certain long-lived mobile radionuclides. This report documents the determination of interim upper limits for radionuclide inventories and concentrations which should be allowed in the disposal structures. The work presented here will aid in the development of both waste acceptance criteria and operating limits for the E-Area Vaults. Disposal limits for forty isotopes which comprise the SRS waste streams were determined. The limits are based on total facility and vault inventories for those radionuclides which impact groundwater) and on waste package concentrations for those radionuclides which could affect intruders. (author)

  20. An Energy-Based Limit State Function for Estimation of Structural Reliability in Shock Environments

    Directory of Open Access Journals (Sweden)

    Michael A. Guthrie

    2013-01-01

    Full Text Available limit state function is developed for the estimation of structural reliability in shock environments. This limit state function uses peak modal strain energies to characterize environmental severity and modal strain energies at failure to characterize the structural capacity. The Hasofer-Lind reliability index is briefly reviewed and its computation for the energy-based limit state function is discussed. Applications to two degree of freedom mass-spring systems and to a simple finite element model are considered. For these examples, computation of the reliability index requires little effort beyond a modal analysis, but still accounts for relevant uncertainties in both the structure and environment. For both examples, the reliability index is observed to agree well with the results of Monte Carlo analysis. In situations where fast, qualitative comparison of several candidate designs is required, the reliability index based on the proposed limit state function provides an attractive metric which can be used to compare and control reliability.

  1. Strengths and Limitations of Evidence-Based Dermatology

    Science.gov (United States)

    Williams, Hywel C

    2014-01-01

    The need for understanding and reflecting on evidence-based dermatology (EBD) has never been greater given the exponential growth of new external evidence to inform clinical practice. Like any other branch of medicine, dermatologists need to acquire new skills in constructing answerable questions, efficiently searching electronic bibliographic databases, and critically appraising different types of studies. Secondary summaries of evidence in the form of systematic reviews (SR), that is, reviews that are conducted in a systematic, unbiased and explicit manner, reside at the top of the evidence hierarchy, because they are less prone to bias than traditional expert reviews. In addition to providing summaries of the best external evidence, systematic reviews and randomized controlled trials (RCTs) are also powerful ways of identifying research gaps and ultimately setting the agenda of future clinical research in dermatology. But like any paradigm, EBD can have its limitations. Wrong application, misuse and overuse of EBD can have serious consequences. For example, mindless pooling together of data from dissimilar studies in a meta-analysis may render it a form of reductionism that does not make any sense. Similarly, even highly protocolised study designs such as SRs and RCTs are still susceptible to some degree of dishonesty and bias. Over-reliance on randomized controlled trials (RCT) may be inappropriate, as RCTs are not a good source for picking up rare but important adverse effects such as lupus syndrome with minocycline. A common criticism leveled against SRs is that these frequently conclude that there is lack of sufficient evidence to inform current clinical practice, but arguably, such a perception is grounded more on the interpretation of the SRs than anything else. The apparent absence of evidence should not paralyze the dermatologist to adopt a state of therapeutic nihilism. Poor primary data and an SR based on evidence that is not up-to-date are also

  2. The impact of resource limitation and the phenology of parasitoid attack on the duration of insect herbivore outbreaks.

    Science.gov (United States)

    Umbanhowar, James; Hastings, Alan

    2002-11-01

    Fluctuations in resource quality and quantity, and changes in mortality due to predators and parasites are thought to be of prime importance in the regular fluctuations of forest insects. We examine how food limitation and parasitoids with different phenologies of attack regulate the population cycles of insect hosts. Our analysis of the limit cycle of a model with a biologically realistic form of density dependence in the host yields two novel predictions. First, outbreaks will typically last for only 2 generations after parasitoids begin to reduce the host population below the maximum density. Second, host growth rate is important in determining cycle length only when parasitoids attack before the impacts of resource limitation affect the host. The robustness of these predictions are tested using a more general form of density dependence in the host, revealing that our predictions are valid as long as density dependence in the host is not too overcompensatory.

  3. Calculation of risk-based detection limits for radionuclides in the liquid effluents from Korean nuclear power plants

    International Nuclear Information System (INIS)

    Cheong, Jae Hak

    2017-01-01

    In order to review if present detection limits of radionuclides in liquid effluent from nuclear power plants are effective enough to warrant compliance with regulatory discharge limits, a risk-based approach is developed to derive a new detection limit for each radionuclide based on radiological criteria. Equations and adjustment factors are also proposed to discriminate the validity of the detection limits for multiple radionuclides in the liquid effluent with or without consideration of the nuclide composition. From case studies to three nuclear power plants in Korea with actual operation data from 2006 to 2015, the present detection limits have turned out to be effective for Hanul Unit 1 but may not be sensitive enough for Kori Unit 1 (8 out of 14 radionuclides) and Wolsong Unit 1 (9 out of 42 radionuclides). However, it is shown that the present detection limits for the latter two nuclear power plants can be justified, if credit is given to the radionuclide composition. Otherwise, consideration should be given to adjustment of the present detection limits. The risk-based approach of this study can be used to determine the validity of established detection limits of a specific nuclear power plant. (author)

  4. Integrated approach for characterizing and comparing exposure-based impacts with life cycle impacts

    DEFF Research Database (Denmark)

    Fantke, Peter; Jolliet, Olivier

    2016-01-01

    ions that involve burden shifting or that result in only incremental improvement. Focusing in the life cycle impacts on widely accepted and applied impact categories like global warming potential or cumulative energy demand aggregating several impact categories will lead to underestimations of life...... to the environment from product-related processes along the product life cycle. We build on a flexible mass balance-based modeling system yielding cumulative multimedia transfer fractions and exposure pathway-specific Product Intake Fractions defined as chemical mass taken in by humans per unit mass of chemical...... in a product. When combined chemical masses in products and further with toxicity information, this approach is a resourceful way to inform CAA and minimize human exposure to toxic chemicals in consumer products through both product use and environmental emissions. We use an example of chemicals in consumer...

  5. Study of anticipated impact on DOE programs from proposed reductions to the external occupational radiation exposure limit

    International Nuclear Information System (INIS)

    1978-01-01

    Many years of radiation exposure experience in all phases of nuclear energy applications were surveyed to evaluate the impact of reducing the present DOE limit of 5 rem/yr. Conclusions drawn are: (1) Reduction of the occupational exposure limit would result in significant increase in total accumulated exposure to the current radiation worker population and could require an increase in the work force with attending personnel and administrative problems. (2) Important programs/facilities would have to be abandoned. (3) Some engineering technology is not sufficiently developed to design or operate at the 0.5 rem/yr limit. (4) Exposure reduction to 2.5 rem/yr would significantly increase costs and would result in a small increase in total exposure to the work force. (5) Significant initial capital cost plus increased annual costs would result. (6) The major emphasis in controlling occupational exposure should be on continued work toward further reduction of total man-rem. This should involve continued development of ALAP programs along with improvements in dose measurement and recording methods, more sophisticated exposure records, and containment, handling and remote maintenance techniques. (7) Radiation protection practices at DOE facilities have maintained exposures of the bulk of the nuclear work force substantially below current limits for many years. (8) The current standards of 5 rem/yr is used only as a limit. For example, 97% of the employees receive less than 0.5 rem/yr

  6. Annual limits on intake of radionuclides by workers based on the 1990 recommendations

    International Nuclear Information System (INIS)

    1991-01-01

    The Commission's new radiation protection recommendations (ICRP, 1991) were developed to take into account new biological information related to the detriment associated with radiation exposures and supersede earlier recommendations in Publication 26 (ICRP, 1977). Adoption of the recommendations necessitates a revision in the Commission's secondary limits contained in Publication 30, Parts 1-4 (ICRP, 1979a, 1980, 1981b, 1988). In order to permit immediate application of these new recommendations, new values of the Annual Limits on Intake (ALIs) which incorporate the new dose limits, radiation weighting factors, and tissue weighting factors and the metabolic and biokinetic information from Publication 30 have been calculated. Presented here are secondary limits for the 1990 Recommendations based on the dosimetric data assembled during the preparation of Publication 30. (author)

  7. Dietary Strategies to Reduce Environmental Impact: A Critical Review of the Evidence Base.

    Science.gov (United States)

    Ridoutt, Bradley G; Hendrie, Gilly A; Noakes, Manny

    2017-11-01

    The food system is a major source of environmental impact, and dietary change has been recommended as an important and necessary strategy to reduce this impact. However, assessing the environmental performance of diets is complex due to the many types of foods eaten and the diversity of agricultural production systems and local environmental settings. To assess the state of science and identify knowledge gaps, an integrative review of the broad topic of environment and diet was undertaken, with particular focus on the completeness of coverage of environmental concerns and the metrics used. Compared with the 14 discrete environmental areas of concern identified in the United Nations Sustainable Development Goals, the located journal literature mainly addressed greenhouse gas (GHG) emissions and, to a lesser extent, land and water use. Some relevant concerns were rarely addressed or not addressed at all. In the case of GHG emissions, changes in land use and soil carbon stocks were seldom considered. This represents a disconnect between the science informing strategic climate action in the agricultural sector and the science informing public health nutrition. In the case of land and water use, few studies used metrics that are appropriate in a life-cycle context. Some metrics produce inherently biased results, which misinform about environmental impact. The limited evidence generally points to recommended diets having lower environmental impacts than typical diets, although not in every case. This is largely explained by the overconsumption of food energy associated with average diets, which is also a major driver of obesity. A shared-knowledge framework is identified as being needed to guide future research on this topic. Until the evidence base becomes more complete, commentators on sustainable diets should not be quick to assume that a dietary strategy to reduce overall environmental impact can be readily defined or recommended. © 2017 American Society for

  8. Investigation of the behaviour of impact limiting devices of transport casks for radioactive materials in the package approval and risk analysis; Untersuchung des Verhaltens stossdaempfender Bauteile von Transportbehaeltern fuer radioaktive Stoffe in Bauartpruefung und Risikoanalyse

    Energy Technology Data Exchange (ETDEWEB)

    Neumann, Martin

    2009-08-20

    Transport casks for radioactive materials with a Type-B package certificate have to ensure that even under severe accident scenarios the radioactive content remains safely enclosed, in an undercritical arrangement and that ionising radiation is sufficiently shielded. The impact limiter absorbs in an accident scenario the major part of the impact energy and reduces the maximum force applied on the cask body. Therefore the simulation of the behaviour of impact limiting devices of transport casks for nuclear material is of great interest for the design assessment in the package approval as well as for risk analysis in the field of transport of radioactive materials. The behaviour of the impact limiter is influenced by a number of parameters like impact limiter construction, material properties and loading conditions. Uncertainties exist for the application of simplified numerical tools for calculations of impact limiting devices. Uncertainities exist when applying simplified numerical tools. A model describing the compression of wood in axial direction of wood under large deformations for simulation with complex numerical procedures like dynamic Finite Element Methods has not been developed yet. Therefore this thesis concentrates on deriving a physical model for the behaviour of wood and analysing the applicability of different modeling techniques. A model describing the compression of wood in axial direction under large deformations was developed on the basis of an analysis of impact limiter of prototypes of casks for radioactive materials after a 9-m-drop-test and impact tests with wooden specimens. The model describes the softening, which wood under large deformation exhibits, as a function of the lateral strain constraint. The larger the lateral strain restriction, the more energy wood can absorb. The energy absorption capacity of impact limiter depends therefore on the ability of the outer steel sheet structure to prevent wood from evading from the main

  9. Lower limit on the achievable temperature in resonator-based sideband cooling

    Science.gov (United States)

    Grajcar, M.; Ashhab, S.; Johansson, J. R.; Nori, F.

    2009-03-01

    A resonator with eigenfrequency φr can be effectively used as a cooler for another linear oscillator with a much smaller frequency φmφr. A huge cooling effect, which could be used to cool a mechanical oscillator below the energy of quantum fluctuations, has been predicted by several authors. However, here we show that there is a lower limit T^* on the achievable temperature, given by T^* = Tm; φm/ φr, that was not considered in previous work and can be higher than the quantum limit in realistic experimental realizations. We also point out that the decay rate of the resonator, which previous studies stress should be small, must be larger than the decay rate of the cooled oscillator for effective cooling. M. Grajcar, S. Ashhab, J.R. Johansson, F. Nori, Lower limit on the achievable temperature in resonator-based sideband cooling, Phys. Rev. B 78, 035406 (2008). URL: http://link.aps.org/abstract/PRB/v78/e035406

  10. Environmental Assessment: General Plan-Based Environmental Impact Analysis Process, Laughlin Air Force Base

    Science.gov (United States)

    2007-05-01

    BASED ENVIROMENTAL IMPACT ANALYSIS PROCESS LAUGHLIN AIR FORCE BASE, TEXAS AGENCY: 47th Flying Training Wing (FTW), Laughlin Air Force Base (AFB), Texas...m3 micrograms per cubic meter US United States USACE United States Army Corp of Engineers USC United States Code USCB United States Census Bureau...effects and annoyance in that very few flight operations and ground engine runs occur between 2200 hours and 0700 hours. BMPs include restricting the

  11. 12 CFR 614.4351 - Computation of lending and leasing limit base.

    Science.gov (United States)

    2010-01-01

    ... adjustments: (1) Where one institution invests in another institution in connection with the sale of a loan... the purchasing institution. (2) Stock protected under section 4.9A of the Act may be included in the lending and leasing limit base until January 1, 1998. (3) Any amounts of preferred stock not eligible to...

  12. Examining social norm impacts on obesity and eating behaviors among US school children based on agent-based model.

    Science.gov (United States)

    Wang, Youfa; Xue, Hong; Chen, Hsin-jen; Igusa, Takeru

    2014-09-06

    Although the importance of social norms in affecting health behaviors is widely recognized, the current understanding of the social norm effects on obesity is limited due to data and methodology limitations. This study aims to use nontraditional innovative systems methods to examine: a) the effects of social norms on school children's BMI growth and fruit and vegetable (FV) consumption, and b) the effects of misperceptions of social norms on US children's BMI growth. We built an agent-based model (ABM) in a utility maximization framework and parameterized the model based on empirical longitudinal data collected in a US nationally representative study, the Early Childhood Longitudinal Study - Kindergarten Cohort (ECLS-K), to test potential mechanisms of social norm affecting children's BMI growth and FV consumption. Intraclass correlation coefficients (ICC) for BMI were 0.064-0.065, suggesting that children's BMI were similar within each school. The correlation between observed and ABM-predicted BMI was 0.87, indicating the validity of our ABM. Our simulations suggested the follow-the-average social norm acts as an endogenous stabilizer, which automatically adjusts positive and negative deviance of an individual's BMI from the group mean of a social network. One unit of BMI below the social average may lead to 0.025 unit increase in BMI per year for each child; asymmetrically, one unit of BMI above the social average, may only cause 0.015 unit of BMI reduction. Gender difference was apparent. Social norms have less impact on weight reduction among girls, and a greater impact promoting weight increase among boys. Our simulation also showed misperception of the social norm would push up the mean BMI and cause the distribution to be more skewed to the left. Our simulation results did not provide strong support for the role of social norms on FV consumption. Social norm influences US children's BMI growth. High obesity prevalence will lead to a continuous increase in

  13. Further limitations on nuclear testing

    International Nuclear Information System (INIS)

    Brown, P.S.

    1991-11-01

    This document addresses a number of subjects related to further constraints on nuclear testing, briefly discussing each of the following topics: the current political situation, the kinds of steps that might next be taken in test limitations and the impacts of further testing limits, the need for a test ban readiness program, some issues related to verification, and the possibility of confidence building measures as alternative, or near-term, steps to further test limitations

  14. Impact localization in dispersive waveguides based on energy-attenuation of waves with the traveled distance

    Science.gov (United States)

    Alajlouni, Sa'ed; Albakri, Mohammad; Tarazaga, Pablo

    2018-05-01

    An algorithm is introduced to solve the general multilateration (source localization) problem in a dispersive waveguide. The algorithm is designed with the intention of localizing impact forces in a dispersive floor, and can potentially be used to localize and track occupants in a building using vibration sensors connected to the lower surface of the walking floor. The lower the wave frequencies generated by the impact force, the more accurate the localization is expected to be. An impact force acting on a floor, generates a seismic wave that gets distorted as it travels away from the source. This distortion is noticeable even over relatively short traveled distances, and is mainly caused by the dispersion phenomenon among other reasons, therefore using conventional localization/multilateration methods will produce localization error values that are highly variable and occasionally large. The proposed localization approach is based on the fact that the wave's energy, calculated over some time window, decays exponentially as the wave travels away from the source. Although localization methods that assume exponential decay exist in the literature (in the field of wireless communications), these methods have only been considered for wave propagation in non-dispersive media, in addition to the limiting assumption required by these methods that the source must not coincide with a sensor location. As a result, these methods cannot be applied to the indoor localization problem in their current form. We show how our proposed method is different from the other methods, and that it overcomes the source-sensor location coincidence limitation. Theoretical analysis and experimental data will be used to motivate and justify the pursuit of the proposed approach for localization in a dispersive medium. Additionally, hammer impacts on an instrumented floor section inside an operational building, as well as finite element model simulations, are used to evaluate the performance of

  15. Evaluating the Impact of Conservatism in Industrial Fatigue Analysis of Life-Limited Components

    Directory of Open Access Journals (Sweden)

    Hoole Joshua

    2018-01-01

    Full Text Available This paper presents a review of the conservatism approaches applied by different industrial sectors to the stress-life (S-N analysis of ‘life-limited’ or ‘safe-life’ components. A comparison of the fatigue design standards for 6 industrial sectors identified that the conservatism approaches are highly inconsistent when comparing the areas of variability and uncertainty accounted for along with the conservatism magnitude and method of application. Through the use of a case-study based on the SAE keyhole benchmark and 4340 steel S-N data, the industrial sector which introduces the greatest reduction of a component life-limit was identified as the nuclear sector. The results of the case-study also highlighted that conservatism applied to account for scatter in S-N data currently provides the greatest contribution to the reduction of component life-limits.

  16. A computer-based system for environmental impact assessment (EIA) applications to energy power stations in Turkey: CEDINFO

    Energy Technology Data Exchange (ETDEWEB)

    Say, Nuriye Peker; Yuecel, Muzaffer [Cukurova University, Adana (Turkey). Department of Landscape Architecture; Yilmazer, Mehmet [Bogazici University, Kandilli, Istanbul (Turkey). Kandilli Observatory and Earthquake Research Institute

    2007-12-15

    Environmental impact assessment (EIA) is a tool for decision makers to take into account the possible effects of a proposed project on the environment and is also a process for collecting the data related to a project design and project area. Different techniques are used for the EIA process. In recent years, including the design and development of databases, classification systems, computer models and expert systems have been used extensively in impact assessment studies. Knowledge-based systems referred to as expert systems and different computer-based systems are an emerging technology in information processing and are becoming increasingly useful tools in different applications areas including EIA studies. Their use for EIA has been quite limited in developing countries, because of the constraints on resources, particularly in expertise and data. In this study, a knowledge-based software - CEDINFO - developed by authors was introduced. CEDINFO to be used for EIA practices on energy-generating stations was designed based on the legal EIA process in Turkey. According to the EIA Regulation enacted in Turkey in 1993, energy-generating stations (thermal power station, hydraulic station, nuclear station) in different categories require mandatory EIA reports duly approved by The Ministry of Environment and Forestry before their construction. CEDINFO primarily aims to provide educational support for EIA practices and decision-makers on energy-generating stations. (author)

  17. A computer-based system for environmental impact assessment (EIA) applications to energy power stations in Turkey: CEDINFO

    Energy Technology Data Exchange (ETDEWEB)

    Nuriye Peker Say; Muzaffer Yucel; Mehmet Yilmazer [Cukurova University, Adana (Turkey). Department of Landscape Architecture

    2007-12-15

    Environmental impact assessment (EIA) is a tool to enable decision makers to account for the possible effects of a proposed project on the environment and is also a process for collecting the data related to a project design and project area. Different techniques are used for the EIA process. In recent years, including the design and development of databases, classification systems, computer models and expert systems have been used extensively in impact assessment studies. Knowledge-based systems referred to as expert systems and different computer-based systems are an emerging technology in information processing and are becoming increasingly useful tools in different applications areas including EIA studies. Their use for EIA has been quite limited in developing countries, because of the constraints on resources, particularly in expertise and data. In this study, a knowledge-based software CEDINFO developed by authors was introduced. CEDINFO to be used for EIA practices on energy-generating stations was designed based on the legal EIA process in Turkey. According to the EIA Regulation enacted in Turkey in 1993, energy-generating stations (thermal power stations, hydroelectric power stations, nuclear power stations) in different categories require mandatory EIA reports duly approved by The Ministry of Environment and Forestry before their construction. CEDINFO primarily aims to provide educational support for EIA practices and decision-makers on energy-generating stations. 23 refs., 5 figs., 2 tabs.

  18. A computer-based system for environmental impact assessment (EIA) applications to energy power stations in Turkey: CEDINFO

    International Nuclear Information System (INIS)

    Say, Nuriye Peker; Yuecel, Muzaffer; Yilmazer, Mehmet

    2007-01-01

    Environmental impact assessment (EIA) is a tool for decision makers to take into account the possible effects of a proposed project on the environment and is also a process for collecting the data related to a project design and project area. Different techniques are used for the EIA process. In recent years, including the design and development of databases, classification systems, computer models and expert systems have been used extensively in impact assessment studies. Knowledge-based systems referred to as expert systems and different computer-based systems are an emerging technology in information processing and are becoming increasingly useful tools in different applications areas including EIA studies. Their use for EIA has been quite limited in developing countries, because of the constraints on resources, particularly in expertise and data. In this study, a knowledge-based software-CEDINFO-developed by authors was introduced. CEDINFO to be used for EIA practices on energy-generating stations was designed based on the legal EIA process in Turkey. According to the EIA Regulation enacted in Turkey in 1993, energy-generating stations (thermal power station, hydraulic station, nuclear station) in different categories require mandatory EIA reports duly approved by The Ministry of Environment and Forestry before their construction. CEDINFO primarily aims to provide educational support for EIA practices and decision-makers on energy-generating stations

  19. Limitations of studies on school-based nutrition education interventions for obesity in China: a systematic review and meta-analysis.

    Science.gov (United States)

    Kong, Kaimeng; Liu, Jie; Tao, Yexuan

    2016-01-01

    School-based nutrition education has been widely implemented in recent years to fight the increasing prevalence of childhood obesity in China. A comprehensive literature search was performed using six databases to identify studies of school-based nutrition education interventions in China. The methodological quality and the risk of bias of selected literature were evaluated. Stratified analysis was performed to identify whether different methodologies influenced the estimated effect of the intervention. Seventeen articles were included in the analysis. Several of the included studies had inadequate intervention duration, inappropriate randomization methods, selection bias, unbalanced baseline characteristics between control and intervention groups, and absent sample size calculation. Overall, the studies showed no significant impact of nutrition education on obesity (OR=0.76; 95% CI=0.55-1.05; p=0.09). This can be compared with an OR of 0.68 for interventions aimed at preventing malnutrition and an OR of 0.49 for interventions aimed at preventing iron-deficiency anemia. When studies with unbalanced baseline characteristics between groups and selection bias in the study subjects were excluded, the impact of nutrition education on obesity was significant (OR=0.73; 95% CI=0.55-0.98; p=0.003). An analysis stratified according to the duration of intervention revealed that the intervention was effective only when it lasted for more than 2 years (OR=0.49, 95% CI=0.42-0.58; pnutrition education programs in China have some important limitations that might affect the estimated effectiveness of the intervention.

  20. Joint preprocesser-based detector for cooperative networks with limited hardware processing capability

    KAUST Repository

    Abuzaid, Abdulrahman I.

    2015-02-01

    In this letter, a joint detector for cooperative communication networks is proposed when the destination has limited hardware processing capability. The transmitter sends its symbols with the help of L relays. As the destination has limited hardware, only U out of L signals are processed and the energy of the remaining relays is lost. To solve this problem, a joint preprocessing based detector is proposed. This joint preprocessor based detector operate on the principles of minimizing the symbol error rate (SER). For a realistic assessment, pilot symbol aided channel estimation is incorporated for this proposed detector. From our simulations, it can be observed that our proposed detector achieves the same SER performance as that of the maximum likelihood (ML) detector with all participating relays. Additionally, our detector outperforms selection combining (SC), channel shortening (CS) scheme and reduced-rank techniques when using the same U. Our proposed scheme has low computational complexity.

  1. Greenhouse impact assessment of peat-based Fischer-Tropsch diesel life-cycle

    International Nuclear Information System (INIS)

    Kirkinen, Johanna; Soimakallio, Sampo; Maekinen, Tuula; Savolainen, Ilkka

    2010-01-01

    New raw materials for transportation fuels need to be introduced, in order to fight against climate change and also to cope with increasing risks of availability and price of oil. Peat has been recognised suitable raw material option for diesel produced by gasification and Fischer-Tropsch (FT) synthesis. The energy content of Finnish peat reserves is remarkable. In this study, the greenhouse impact of peat-based FT diesel production and utilisation in Finland was assessed from the life-cycle point of view. In 100 year's time horizon the greenhouse impact of peat-based FT diesel is likely larger than the impact of fossil diesel. The impact can somewhat be lowered by producing peat from the agricultural peatland (strong greenhouse gas emissions from the decaying peatlayer are avoided) with new peat production technique, and utilising the produced biomass from the after-treatment area for diesel also. If diesel production is integrated with pulp and paper mill to achieve energy efficiency benefits and if the electricity demand can be covered by zero emission electricity, the greenhouse impact of peat-based FT diesel reduces to the level of fossil diesel when agricultural peatland is used, and is somewhat higher when forestry-drained peatland is used as raw material source.

  2. Design of limited-stop service based on the degree of unbalance of passenger demand

    Science.gov (United States)

    2018-01-01

    This paper presents a limited-stop service for a bus fleet to meet the unbalanced demand of passengers on a bus route and to improve the transit service of the bus route. This strategy includes two parts: a degree assessment of unbalanced passenger demand and an optimization of the limited-stop service. The degree assessment of unbalanced passenger demand, which is based on the different passenger demand between stations and the unbalance of passengers within the station, is used to judge whether implementing the limited-stop service is necessary for a bus route. The optimization of limited-stop service considers the influence of stop skipping action and bus capacity on the left-over passengers to determine the proper skipping stations for the bus fleet serving the entire route by minimizing both the waiting time and in-vehicle time of passengers and the running time of vehicles. A solution algorithm based on genetic algorithm is also presented to evaluate the degree of unbalanced passenger demand and optimize the limited-stop scheme. Then, the proper strategy is tested on a bus route in Changchun city of China. The threshold of degree assessment of unbalanced passenger demand can be calibrated and adapted to different passenger demands. PMID:29505585

  3. Design of limited-stop service based on the degree of unbalance of passenger demand.

    Science.gov (United States)

    Zhang, Hu; Zhao, Shuzhi; Liu, Huasheng; Liang, Shidong

    2018-01-01

    This paper presents a limited-stop service for a bus fleet to meet the unbalanced demand of passengers on a bus route and to improve the transit service of the bus route. This strategy includes two parts: a degree assessment of unbalanced passenger demand and an optimization of the limited-stop service. The degree assessment of unbalanced passenger demand, which is based on the different passenger demand between stations and the unbalance of passengers within the station, is used to judge whether implementing the limited-stop service is necessary for a bus route. The optimization of limited-stop service considers the influence of stop skipping action and bus capacity on the left-over passengers to determine the proper skipping stations for the bus fleet serving the entire route by minimizing both the waiting time and in-vehicle time of passengers and the running time of vehicles. A solution algorithm based on genetic algorithm is also presented to evaluate the degree of unbalanced passenger demand and optimize the limited-stop scheme. Then, the proper strategy is tested on a bus route in Changchun city of China. The threshold of degree assessment of unbalanced passenger demand can be calibrated and adapted to different passenger demands.

  4. The clinical and economic impact of point-of-care CD4 testing in mozambique and other resource-limited settings: a cost-effectiveness analysis.

    Directory of Open Access Journals (Sweden)

    Emily P Hyle

    2014-09-01

    Full Text Available Point-of-care CD4 tests at HIV diagnosis could improve linkage to care in resource-limited settings. Our objective is to evaluate the clinical and economic impact of point-of-care CD4 tests compared to laboratory-based tests in Mozambique.We use a validated model of HIV testing, linkage, and treatment (CEPAC-International to examine two strategies of immunological staging in Mozambique: (1 laboratory-based CD4 testing (LAB-CD4 and (2 point-of-care CD4 testing (POC-CD4. Model outcomes include 5-y survival, life expectancy, lifetime costs, and incremental cost-effectiveness ratios (ICERs. Input parameters include linkage to care (LAB-CD4, 34%; POC-CD4, 61%, probability of correctly detecting antiretroviral therapy (ART eligibility (sensitivity: LAB-CD4, 100%; POC-CD4, 90% or ART ineligibility (specificity: LAB-CD4, 100%; POC-CD4, 85%, and test cost (LAB-CD4, US$10; POC-CD4, US$24. In sensitivity analyses, we vary POC-CD4-specific parameters, as well as cohort and setting parameters to reflect a range of scenarios in sub-Saharan Africa. We consider ICERs less than three times the per capita gross domestic product in Mozambique (US$570 to be cost-effective, and ICERs less than one times the per capita gross domestic product in Mozambique to be very cost-effective. Projected 5-y survival in HIV-infected persons with LAB-CD4 is 60.9% (95% CI, 60.9%-61.0%, increasing to 65.0% (95% CI, 64.9%-65.1% with POC-CD4. Discounted life expectancy and per person lifetime costs with LAB-CD4 are 9.6 y (95% CI, 9.6-9.6 y and US$2,440 (95% CI, US$2,440-US$2,450 and increase with POC-CD4 to 10.3 y (95% CI, 10.3-10.3 y and US$2,800 (95% CI, US$2,790-US$2,800; the ICER of POC-CD4 compared to LAB-CD4 is US$500/year of life saved (YLS (95% CI, US$480-US$520/YLS. POC-CD4 improves clinical outcomes and remains near the very cost-effective threshold in sensitivity analyses, even if point-of-care CD4 tests have lower sensitivity/specificity and higher cost than published

  5. Flat punch adhesion: transition from fracture-based to strength-limited pull-off

    International Nuclear Information System (INIS)

    Jiang, Yijie; Turner, Kevin T; Grierson, David S

    2014-01-01

    The adhesion of a cylindrical flat punch to a surface due to interatomic forces is a well-known problem that is important in many applications, including indentation experiments and the adhesion of fibrillar structures. Traditionally, the pull-off force has been related to the work of adhesion and punch geometry via the Kendall solution that uses a Griffith energy balance to assess crack propagation and pull-off. More recently, it has been shown that under certain conditions, notably at small punch diameters, the contact can behave in a ‘strength-limited’ fashion in which the interface separates uniformly rather than via crack propagation. Here, a Maugis-Dugdale-type analysis of power-law-shaped bodies in contact is used to examine the change in behaviour from the fracture-based Kendall solution to strength-limited pull-off for cylindrical flat punches. The transition from fracture-based to strength-limited behaviour is described in terms of a non-dimensional parameter that is similar to previous quantities used to describe the transition and is a function of the punch size, the elasticity of the contact, and the adhesion properties. The results of this relatively simple analysis compare favourably with results from more complex computational simulations. In addition, the results are used to develop a function that quantifies the transition between the Kendall solution and the strength-limited solution in order to facilitate interpretation of adhesion measurements in the transition regime between the two limits. Finally, the power-law analysis is used to assess the sensitivity of the transition to the exact shape of the punch. (paper)

  6. Physiology-based modelling approaches to characterize fish habitat suitability: Their usefulness and limitations

    Science.gov (United States)

    Teal, Lorna R.; Marras, Stefano; Peck, Myron A.; Domenici, Paolo

    2018-02-01

    Models are useful tools for predicting the impact of global change on species distribution and abundance. As ectotherms, fish are being challenged to adapt or track changes in their environment, either in time through a phenological shift or in space by a biogeographic shift. Past modelling efforts have largely been based on correlative Species Distribution Models, which use known occurrences of species across landscapes of interest to define sets of conditions under which species are likely to maintain populations. The practical advantages of this correlative approach are its simplicity and the flexibility in terms of data requirements. However, effective conservation management requires models that make projections beyond the range of available data. One way to deal with such an extrapolation is to use a mechanistic approach based on physiological processes underlying climate change effects on organisms. Here we illustrate two approaches for developing physiology-based models to characterize fish habitat suitability. (i) Aerobic Scope Models (ASM) are based on the relationship between environmental factors and aerobic scope (defined as the difference between maximum and standard (basal) metabolism). This approach is based on experimental data collected by using a number of treatments that allow a function to be derived to predict aerobic metabolic scope from the stressor/environmental factor(s). This function is then integrated with environmental (oceanographic) data of current and future scenarios. For any given species, this approach allows habitat suitability maps to be generated at various spatiotemporal scales. The strength of the ASM approach relies on the estimate of relative performance when comparing, for example, different locations or different species. (ii) Dynamic Energy Budget (DEB) models are based on first principles including the idea that metabolism is organised in the same way within all animals. The (standard) DEB model aims to describe

  7. Limited provider panels: their promise and problems in an individual health insurance market.

    Science.gov (United States)

    Pitsenberger, William H

    2008-07-01

    The cost of healthcare, and consequently of health insurance, continues to increase dramatically. A growing chorus calls for replacing the fundamental method by which people purchase insurance today--through their employers--with a system of individually acquired insurance. This article argues that changing how Americans purchase health insurance could change the dynamics between insurers and healthcare providers in a way that could favorably impact costs, primarily through reliance on highly limited provider networks. It examines the bases of legal obstacles to limited provider networks embedded in both statutory and case law and urges re-examination of those bases in light of changes in the distribution system of health insurance.

  8. Inductive fault current limiter based on multiple superconducting rings of small diameter

    International Nuclear Information System (INIS)

    Osorio, M R; Cabo, L; Veira, J A; Vidal, F

    2004-01-01

    We present a fault current limiter prototype based on the use of a secondary comprised of an array of magnetic cores of small sections, each one of them with several superconducting rings. The main advantage of this configuration is that it is easier to make small diameter superconducting rings which, in addition, are more homogeneous and allow better refrigeration. We then present detailed measurements that show that, in addition to these advantages, this prototype offers the same limitation performances than when using a unique core and a superconducting ring with an equivalent area as the array of small section cores

  9. Material Limitations on the Detection Limit in Refractometry

    OpenAIRE

    Skafte-Pedersen, Peder; Nunes, Pedro S.; Xiao, Sanshui; Mortensen, Niels Asger

    2009-01-01

    We discuss the detection limit for refractometric sensors relying on high-Q optical cavities and show that the ultimate classical detection limit is given by min {Δn} ≳ η with n + iη being the complex refractive index of the material under refractometric investigation. Taking finite Q factors and filling fractions into account, the detection limit declines. As an example we discuss the fundamental limits of silicon-based high-Q resonators, such as photonic crystal resonators, for sensing in a...

  10. Generally applicable limits on intakes of uranium based on its chemical toxicity and the radiological significance of intakes at those limits

    International Nuclear Information System (INIS)

    Thorne, M C; Wilson, J

    2015-01-01

    Uranium is chemically toxic and radioactive, and both considerations have to be taken into account when limiting intakes of the element, in the context of both occupational and public exposures. Herein, the most recent information available on the chemical toxicity and biokinetics of uranium is used to propose new standards for limiting intakes of the element. The approach adopted allows coherent standards to be set for ingestion and inhalation of different chemical forms of the element by various age groups. It also allows coherent standards to be set for occupational and public exposures (including exposures of different age groups) and for various exposure regimes (including short-term and chronic exposures). The proposed standards are more restrictive than those used previously, but are less restrictive than the Minimal Risk Levels proposed recently by the US Agency for Toxic Substances and Disease Registry. Having developed a set of proposed limits based solely on chemical toxicity considerations, the radiological implications of exposure at those proposed limits are investigated for natural, depleted and enriched uranium. (paper)

  11. The Limits of Logic-Based Inherent Safety of Social Robots

    DEFF Research Database (Denmark)

    Bentzen, Martin Mose

    2017-01-01

    Social robots can reason and act while taking into accountsocial and cultural structures, for instance by complying withsocial or ethical norms or values. As social robots are likely to becomemore common and advanced and thus likely to interact withhuman beings in increasingly complex situations......-based safety for ethical robots is shown. Afterwards,an empirical study is used to show that there is a clash betweendeontic reasoning and most formal deontic logics. I give anexample as to how this clash can cause problems in human-robot interaction.I conclude that deontic logics closer to natural...... languagereasoning are needed and that logic only should play a limited partin the overall safety architecture of a social robot, which should alsobe based on other principles of safe design....

  12. From Limits to Growth to Limitless Growth

    Directory of Open Access Journals (Sweden)

    Garry Jacobs

    2012-04-01

    Full Text Available The publication of the Club of Rome’s landmark report ‘The Limits to Growth’ in 1972 shook the intellectual foundations of social theory and challenged the very premises on which modern economy and prosperity are based. Once set in motion, it led to a revolutionary re-evaluation of human aspirations and economic activities. Among its many consequences, it has stimulated creative minds to look freshly at the underlying processes governing the wealth and welfare of nations. The article then traces their creative impact on the mind of one of the most original economic theorists of our age – Orio Giarini.[*] As ‘The Limits to Growth’ alarmed the world by the unsustainability and dire consequences of unbridled economic growth, Giarini offers a correspondingly affirmative vision of economics with unlimited potential for wealth and welfare.

  13. The impact of COI-based storage on order-picking times

    Directory of Open Access Journals (Sweden)

    Grzegorz Tarczyński

    2017-09-01

    Full Text Available Background: The increasing competitiveness on the global markets enforces the need for a fast and reliable delivery. This task is possible to perform by improving the order-picking systems. The implementation of automated storage and retrieval systems (AS/RS is not always profitable. In the warehouses where the order-picking is performed in accordance with the principle of picker-to-part rule, the picking efficiency optimization includes among others: the warehouse layout, the storage policy, the routing heuristic, the way of zoning, the order-batching method, and the sequencing of pick-lists. In the paper the impact of the storage policy on the order-picking times is checked. Methods: The influence of storage based on Heskett’s cube-per-order index (COI on the average order-picking times is analyzed. The items based on increasing values of COI index are divided on classes. To determine the demand for items the analytical function proposed by Caron is used. Results: In the paper the benefits of storage based on COI index are compared with random storage and storage based only on picking frequency. It is assumed that the bin, to which the picker collects items has limited capacity – some orders has to be divided on smaller pick-lists. The analysis was performed using simulation tools. Additionally, the algorithm (taking into account different sizes of picker’s bin for order-batching is presented. Conclusions: The analysis shows that the COI-based storage is particularly effective when the size of items increases. The COI-based curve is less skewed than the curve based only on picking frequency. The choice of storage policy should be carried out together with routing heuristic. The use of batching algorithm significantly increases the effectiveness of the order-picking process, but the optimal size of picker’s bin (and batch should be optimized with consideration the sorting process.

  14. Classical limit of quantum gravity in an accelerating universe

    International Nuclear Information System (INIS)

    Schuller, Frederic P.; Wohlfarth, Mattias N.R.

    2005-01-01

    A one-parameter deformation of Einstein-Hilbert gravity with an inverse Riemann curvature term is derived as the classical limit of quantum gravity compatible with an accelerating universe. This result is based on the investigation of semi-classical theories with sectional curvature bounds which are shown not to admit static spherically symmetric black holes if otherwise of phenomenological interest. We discuss the impact on the canonical quantization of gravity, and observe that worldsheet string theory is not affected

  15. Consumer Choice Between Hospital-Based and Freestanding Facilities for Arthroscopy: Impact on Prices, Spending, and Surgical Complications.

    Science.gov (United States)

    Robinson, James C; Brown, Timothy T; Whaley, Christopher; Bozic, Kevin J

    2015-09-16

    Hospital-based outpatient departments traditionally charge higher prices for ambulatory procedures, compared with freestanding surgery centers. Under emerging reference-based benefit designs, insurers establish a contribution limit that they will pay, requiring the patient to pay the difference between that contribution limit and the actual price charged by the facility. The purpose of this study was to evaluate the impact of reference-based benefits on consumer choices, facility prices, employer spending, and surgical outcomes for orthopaedic procedures performed at ambulatory surgery centers. We obtained data on 3962 patients covered by the California Public Employees' Retirement System (CalPERS) who underwent arthroscopy of the knee or shoulder in the three years prior to the implementation of reference-based benefits in January 2012 and on 2505 patients covered by CalPERS who underwent arthroscopy in the two years after implementation. Control group data were obtained on 57,791 patients who underwent arthroscopy and were not subject to reference-based benefits. The impact of reference-based benefits on consumer choices between hospital-based and freestanding facilities, facility prices, employer spending, and surgical complications was assessed with use of difference-in-differences multivariable regressions to adjust for patient demographic characteristics, comorbidities, and geographic location. By the second year of the program, the shift to reference-based benefits was associated with an increase in the utilization of freestanding ambulatory surgery centers by 14.3 percentage points (95% confidence interval, 8.1 to 20.5 percentage points) for knee arthroscopy and by 9.9 percentage points (95% confidence interval, 3.2 to 16.7 percentage points) for shoulder arthroscopy and a corresponding decrease in the use of hospital-based facilities. The mean price paid by CalPERS fell by 17.6% (95% confidence interval, -24.9% to -9.6%) for knee procedures and by 17

  16. Quantitative assessment of human-induced impacts based on net primary productivity in Guangzhou, China.

    Science.gov (United States)

    Wu, Yanyan; Wu, Zhifeng

    2018-02-08

    Urban expansion and land cover change driven primarily by human activities have significant influences on the urban eco-environment, and together with climate change jointly alter net primary productivity (NPP). However, at the spatiotemporal scale, there has been limited quantitative analysis of the impacts of human activities independent of climate change on NPP. We chose Guangzhou city as a study area to analyze the impacts of human activities on NPP, as well as the spatiotemporal variations of those impacts within three segments, using a relative impact index (RII) based on potential NPP (NPP p ), actual NPP (NPP act ), and NPP appropriation due to land use/land cover change (NPP lulc ). The spatial patterns and dynamics of NPP act and NPP lulc were evaluated and the impacts of human activities on NPP during the process of urban sprawl were quantitatively analyzed and assessed using the RII. The results showed that NPP act and NPP lulc in the study area had clear spatial heterogeneity, between 2001 and 2013 there was a declining trend in NPP act while an increasing trend occurred in NPP lulc , and those trends were especially significant in the 10-40-km segment. The results also revealed that more than 91.0% of pixels in whole study region had positive RII values, while the lowest average RII values were found in the > 40-km segment (39.03%), indicating that human activities were not the main cause for the change in NPP there; meanwhile, the average RII was greater than 65.0% in the other two, suggesting that they were subjected to severe anthropogenic disturbances. The RII values in all three segments of the study area increased, indicating an increasing human interference. The 10-40-km buffer zone had the largest slope value (0.5665), suggesting that this segment was closely associated with growing human disturbances. Particularly noteworthy is the fact that the > 40-km segment had a large slope value (0.3323) and required more conservation efforts. Based

  17. Fabricating Simple Wax Screen-Printing Paper-Based Analytical Devices to Demonstrate the Concept of Limiting Reagent in Acid- Base Reactions

    Science.gov (United States)

    Namwong, Pithakpong; Jarujamrus, Purim; Amatatongchai, Maliwan; Chairam, Sanoe

    2018-01-01

    In this article, a low-cost, simple, and rapid fabrication of paper-based analytical devices (PADs) using a wax screen-printing method is reported here. The acid-base reaction is implemented in the simple PADs to demonstrate to students the chemistry concept of a limiting reagent. When a fixed concentration of base reacts with a gradually…

  18. The impact of age and gender on the ICF-based assessment of chronic low back pain.

    Science.gov (United States)

    Fehrmann, Elisabeth; Kotulla, Simone; Fischer, Linda; Kienbacher, Thomas; Tuechler, Kerstin; Mair, Patrick; Ebenbichler, Gerold; Paul, Birgit

    2018-01-12

    To evaluate the impact of age and gender on the international classification of functioning, disability and health (ICF)-based assessment for chronic low back pain. Two hundred forty-four chronic low back pain patients (52% female) with a mean age of 49 years (SD =17.64) were interviewed with the comprehensive ICF core set for activities and participation, and environmental factors. After conducting explorative factor analysis, the impact of age and gender on the different factors was analyzed using analyzes of variances. Results revealed that older patients experienced more limitations within "self-care and mobility" and "walking" but less problems with "transportation" compared to younger patients. Older or middle-aged low back pain patients further perceived more facilitation through "architecture and products for communication", "health services", and "social services and products for mobility" than younger patients. Regarding gender differences, women reported more restriction in "housework" than men. An interaction effect between age and gender was found for "social activities and recreation" with young male patients reporting the highest impairment. The study demonstrated that the comprehensive ICF core set classification for chronic low back pain is influenced by age and gender. This impact is relevant for ICF-based assessments in clinical practice, and should be considered in intervention planning for rehabilitative programs. Implications for rehabilitation It is important to consider age and gender differences when classifying with the ICF. The intervention planning based on the ICF should focus on improvement of bodily functioning and mobility in older patients, facilitation of household activities in women, consideration of work-life balance and recreation (e.g., through mindfulness based stress reduction), and reduction of dissatisfaction with rehabilitation in younger patients. It is important to offer patients the opportunity to participate in

  19. Environmental Impacts of Sand Exploitation. Analysis of Sand Market

    Directory of Open Access Journals (Sweden)

    Marius Dan Gavriletea

    2017-06-01

    Full Text Available Sand is an indispensable natural resource for any society. Despite society’s increasing dependence on sand, there are major challenges that this industry needs to deal with: limited sand resources, illegal mining, and environmental impact of sand mining. The purpose of this paper is twofold: to present an overview of the sand market, highlighting the main trends and actors for production, export and import, and to review the main environmental impacts associated with sand exploitation process. Based on these findings, we recommend different measures to be followed to reduce negative impacts. Sand mining should be done in a way that limits environmental damage during exploitation and restores the land after mining operations are completed.

  20. High-impact strength acrylic denture base material processed by autoclave.

    Science.gov (United States)

    Abdulwahhab, Salwan Sami

    2013-10-01

    To investigate the effect of two different cycles of autoclave processing on the transverse strength, impact strength, surface hardness and the porosity of high-impact strength acrylic denture base material. High Impact Acryl was the heat-cured acrylic denture base material included in the study. A total of 120 specimens were prepared, the specimens were grouped into: control groups in which high-impact strength acrylic resins processed by conventional water-bath processing technique (74°C for 1.5 h then boil for 30 min) and experimental groups in which high-impact strength acrylic resins processed by autoclave at 121°C, 210 kPa .The experimental groups were divided into (fast) groups for 15 min, and (slow) groups for 30 min. To study the effect of the autoclave processing (Tuttnauer 2540EA), four tests were conducted transverse strength (Instron universal testing machine), impact strength (Charpy tester), surface hardness (shore D), and porosity test. The results were analyzed to ANOVA and LSD test. In ANOVA test, there were highly significant differences between the results of the processing techniques in transverse, impact, hardness, and porosity test. The LSD test showed a significant difference between control and fast groups in transverse and hardness tests and a non-significant difference in impact test and a highly significant difference in porosity test; while, there were a highly significant differences between control and slow groups in all examined tests; finally, there were a non-significant difference between fast and slow groups in transverse and porosity tests and a highly significant difference in impact and hardness tests. In the autoclave processing technique, the slow (long) curing cycle improved the tested physical and mechanical properties as compared with the fast (short) curing cycle. The autoclave processing technique improved the tested physical and mechanical properties of High Impact Acryl. Copyright © 2013 Japan Prosthodontic Society

  1. Reduction rules-based search algorithm for opportunistic replacement strategy of multiple life-limited parts

    Directory of Open Access Journals (Sweden)

    Xuyun FU

    2018-01-01

    Full Text Available The opportunistic replacement of multiple Life-Limited Parts (LLPs is a problem widely existing in industry. The replacement strategy of LLPs has a great impact on the total maintenance cost to a lot of equipment. This article focuses on finding a quick and effective algorithm for this problem. To improve the algorithm efficiency, six reduction rules are suggested from the perspectives of solution feasibility, determination of the replacement of LLPs, determination of the maintenance occasion and solution optimality. Based on these six reduction rules, a search algorithm is proposed. This search algorithm can identify one or several optimal solutions. A numerical experiment shows that these six reduction rules are effective, and the time consumed by the algorithm is less than 38 s if the total life of equipment is shorter than 55000 and the number of LLPs is less than 11. A specific case shows that the algorithm can obtain optimal solutions which are much better than the result of the traditional method in 10 s, and it can provide support for determining to-be-replaced LLPs when determining the maintenance workscope of an aircraft engine. Therefore, the algorithm is applicable to engineering applications concerning opportunistic replacement of multiple LLPs in aircraft engines.

  2. Mechanical characteristics of plastic base Ports and impact on flushing efficacy

    Directory of Open Access Journals (Sweden)

    Guiffant G

    2017-01-01

    Full Text Available Gérard Guiffant,1 Patrice Flaud,1 Laurent Royon,1 Espérie Burnet,2 Jacques Merckx1–3 1University Paris Diderot, Biofluidic Group, UMR CNRS, 2Pulmonary Department and Adult Cystic Fibrosis Centre, Cochin Hospital, 3University Teaching Hospital, Necker-Enfants Malades, Paris, France Background: Three types of totally implantable venous access devices, Ports, are currently in use: titanium, plastic (polyoxymethylene, POM, and mixed (titanium base with a POM shell. Physics theory suggests that the interaction between a non-coring needle (NCN, made of stainless steel and a plastic base would lead to the stronger material (steel altering the more malleable material (plastic. Objectives: To investigate whether needle impacts can alter a plastic base’s surface, thus potentially reducing flushing efficacy. Study design and methods: A Port made of POM was punctured 200 times with a 19-gauge NCN. Following the existing guidelines, the needle tip pricked the base with each puncture. The Port’s base was then examined using a two-dimensional optical instrument, and a bi-dimensional numerical simulation using COMSOL® was performed to investigate potential surface irregularities and their impact on fluid flow. Results: Each needle impact created a hole (mean depth, 0.12 mm with a small bump beside it (mean height, 0.02 mm the Reynolds number Rek≈10. A numerical simulation of the one hole/bump set showed that the flushing efficacy was 60% that of flushing along a flat surface. Discussion: In clinical practice, the number of times a Port is punctured depends on patient and treatment characteristics, but each needle impact on the plastic base may increase the risk of decreased flushing effectiveness. Therefore, the more a plastic Port is accessed, the greater the risk of microorganisms, blood products, and medication accumulation. Conclusions: Multiple needle impacts created an irregular surface on the Port’s base, which decreased flushing efficacy

  3. Assessing control of postural stability in community-living older adults using performance-based limits of stability

    DEFF Research Database (Denmark)

    Jbabdi, Myriam; Boissy, Patrice; Hamel, Mathieu

    2008-01-01

    BACKGROUND: Balance disability measurements routinely used to identify fall risks in frail populations have limited value in the early detection of postural stability deficits in community-living older adults. The objectives of the study were to 1) measure performance-based limits of stability (LOS......-session performance variability during multiple trials using the performance-based LOS paradigm. METHODS: Twenty-four healthy community-living older adults (10 men, 14 women) aged between 62 to 85 (mean age +/- sd, 71.5 +/- 6 yrs) participated in the study. Subjects' performance-based LOS were established by asking...

  4. Recommendations regarding higher axlemass limits for axles fitted with wide base tyres

    CSIR Research Space (South Africa)

    Roux, MP

    2011-01-01

    Full Text Available This paper presents the results of an investigation into possible higher axle mass limits for axles and axle units fitted with wide base tyres, i.e. tyres with nominal section widths of 385 mm, 425 mm and 445 mm, by comparing the road wear caused...

  5. Limits on the impact parameters occurring in specific K-p interactions at 8.25 GeV/c

    International Nuclear Information System (INIS)

    Simopoulon, E.; Fry, J.R.; Muirhead, H.; Rohringer, H.; Apostolakis, A.; Papaelias, P.; Rosaki, H.; Vassiliadis, G.; Filippas, T.A.; Grammatikakis, G.; Tsilimigras, P.; Vayaki, A.; Dallman, D.P.; Markytan, M.

    1976-01-01

    The authors have determined a lower limit of the impact parameter for the reaction associated with the channels K - p→K - pπ + π - and K - p→LAMBDAπ + π - π 0 . The limit was found to be highest for the diffractive part of the first channel (approximately 0.52fm) and smallest for the forward LAMBDA in the second channel (approximately 0.21fm). They have also examined the elements of the inverse correlation matrix for the transfer: the off-diagonal elements are small (consistent with zero) for n=4-7 body products. The log of the correlation matrix as a function of mod(i-j) falls on a straight line and the eigenvalue lambda 1 of the transverse momentum transfer eigenfunction was found to increase slightly from approximately 0.6 for 4-body to approximately 0.7 for 7-body products. The of the Qsub(i), Qsub(j) shows similar behaviour to the . (Auth.)

  6. Impact of power limitations on the performance of WLANs for home networking applications

    OpenAIRE

    Armour, SMD; Lee, BS; Doufexi, A; Nix, AR; Bull, DR

    2001-01-01

    This paper considers the application of 5 GHz wireless LAN technology to home networking applications. An assessment of physical layer performance is presented in the form of the achievable data rate as a function of received signal to noise ratio. The transmit power limitations imposed by the relevant regulatory bodies are also summarised. Based on this information, a state of the art propagation modelling tool is used to evaluate the coverage achieved by a WLAN system in an example resident...

  7. Limited-angle tomography for analyzer-based phase-contrast x-ray imaging

    International Nuclear Information System (INIS)

    Majidi, Keivan; Wernick, Miles N; Brankov, Jovan G; Li, Jun; Muehleman, Carol

    2014-01-01

    Multiple-image radiography (MIR) is an analyzer-based phase-contrast x-ray imaging method, which is emerging as a potential alternative to conventional radiography. MIR simultaneously generates three planar parametric images containing information about scattering, refraction and attenuation properties of the object. The MIR planar images are linear tomographic projections of the corresponding object properties, which allows reconstruction of volumetric images using computed tomography (CT) methods. However, when acquiring a full range of linear projections around the tissue of interest is not feasible or the scanning time is limited, limited-angle tomography techniques can be used to reconstruct these volumetric images near the central plane, which is the plane that contains the pivot point of the tomographic movement. In this work, we use computer simulations to explore the applicability of limited-angle tomography to MIR. We also investigate the accuracy of reconstructions as a function of number of tomographic angles for a fixed total radiation exposure. We use this function to find an optimal range of angles over which data should be acquired for limited-angle tomography MIR (LAT-MIR). Next, we apply the LAT-MIR technique to experimentally acquired MIR projections obtained in a cadaveric human thumb study. We compare the reconstructed slices near the central plane to the same slices reconstructed by CT-MIR using the full angular view around the object. Finally, we perform a task-based evaluation of LAT-MIR performance for different numbers of angular views, and use template matching to detect cartilage in the refraction image near the central plane. We use the signal-to-noise ratio of this test as the detectability metric to investigate an optimum range of tomographic angles for detecting soft tissues in LAT-MIR. Both results show that there is an optimum range of angular view for data acquisition where LAT-MIR yields the best performance, comparable to CT

  8. Limited-angle tomography for analyzer-based phase-contrast x-ray imaging

    Science.gov (United States)

    Majidi, Keivan; Wernick, Miles N.; Li, Jun; Muehleman, Carol; Brankov, Jovan G.

    2014-07-01

    Multiple-image radiography (MIR) is an analyzer-based phase-contrast x-ray imaging method, which is emerging as a potential alternative to conventional radiography. MIR simultaneously generates three planar parametric images containing information about scattering, refraction and attenuation properties of the object. The MIR planar images are linear tomographic projections of the corresponding object properties, which allows reconstruction of volumetric images using computed tomography (CT) methods. However, when acquiring a full range of linear projections around the tissue of interest is not feasible or the scanning time is limited, limited-angle tomography techniques can be used to reconstruct these volumetric images near the central plane, which is the plane that contains the pivot point of the tomographic movement. In this work, we use computer simulations to explore the applicability of limited-angle tomography to MIR. We also investigate the accuracy of reconstructions as a function of number of tomographic angles for a fixed total radiation exposure. We use this function to find an optimal range of angles over which data should be acquired for limited-angle tomography MIR (LAT-MIR). Next, we apply the LAT-MIR technique to experimentally acquired MIR projections obtained in a cadaveric human thumb study. We compare the reconstructed slices near the central plane to the same slices reconstructed by CT-MIR using the full angular view around the object. Finally, we perform a task-based evaluation of LAT-MIR performance for different numbers of angular views, and use template matching to detect cartilage in the refraction image near the central plane. We use the signal-to-noise ratio of this test as the detectability metric to investigate an optimum range of tomographic angles for detecting soft tissues in LAT-MIR. Both results show that there is an optimum range of angular view for data acquisition where LAT-MIR yields the best performance, comparable to CT

  9. An exploratory analysis of PubMed's free full-text limit on citation retrieval for clinical questions.

    Science.gov (United States)

    Krieger, Mary M; Richter, Randy R; Austin, Tricia M

    2008-10-01

    The research sought to determine (1) how use of the PubMed free full-text (FFT) limit affects citation retrieval and (2) how use of the FFT limit impacts the types of articles and levels of evidence retrieved. Four clinical questions based on a research agenda for physical therapy were searched in PubMed both with and without the use of the FFT limit. Retrieved citations were examined for relevancy to each question. Abstracts of relevant citations were reviewed to determine the types of articles and levels of evidence. Descriptive analysis was used to compare the total number of citations, number of relevant citations, types of articles, and levels of evidence both with and without the use of the FFT limit. Across all 4 questions, the FFT limit reduced the number of citations to 11.1% of the total number of citations retrieved without the FFT limit. Additionally, high-quality evidence such as systematic reviews and randomized controlled trials were missed when the FFT limit was used. Health sciences librarians play a key role in educating users about the potential impact the FFT limit has on the number of citations, types of articles, and levels of evidence retrieved.

  10. HOME Income Limits

    Data.gov (United States)

    Department of Housing and Urban Development — HOME Income Limits are calculated using the same methodology that HUD uses for calculating the income limits for the Section 8 program. These limits are based on HUD...

  11. Setting limits: Using air pollution thresholds to protect and restore US ecosystems

    Science.gov (United States)

    Fenn, Mark E.; Lambert, Kathleen F.; Blett, Tamara F.; Burns, Douglas A.; Pardo, Linda H.; Lovett, Gary M.; Haeuber, Richard A.; Evers, David C.; Driscoll, Charles T.; Jeffries, Dean S.

    2011-01-01

    More than four decades of research provide unequivocal evidence that sulfur, nitrogen, and mercury pollution have altered, and will continue to alter, our nation's lands and waters. The emission and deposition of air pollutants harm native plants and animals, degrade water quality, affect forest productivity, and are damaging to human health. Many air quality policies limit emissions at the source but these control measures do not always consider ecosystem impacts. Air pollution thresholds at which ecological effects are observed, such as critical loads, are effective tools for assessing the impacts of air pollution on essential ecosystem services and for informing public policy. U.S. ecosystems can be more effectively protected and restored by using a combination of emissions-based approaches and science-based thresholds of ecosystem damage.

  12. A risk-based microbiological criterion that uses the relative risk as the critical limit

    DEFF Research Database (Denmark)

    Andersen, Jens Kirk; Nørrung, Birgit; da Costa Alves Machado, Simone

    2015-01-01

    A risk-based microbiological criterion is described, that is based on the relative risk associated to the analytical result of a number of samples taken from a food lot. The acceptable limit is a specific level of risk and not a specific number of microorganisms, as in other microbiological...... criteria. The approach requires the availability of a quantitative microbiological risk assessment model to get risk estimates for food products from sampled food lots. By relating these food lot risk estimates to the mean risk estimate associated to a representative baseline data set, a relative risk...... estimate can be obtained. This relative risk estimate then can be compared with a critical value, defined by the criterion. This microbiological criterion based on a relative risk limit is particularly useful when quantitative enumeration data are available and when the prevalence of the microorganism...

  13. Performance limitations in thieno[3,4-c]pyrrole-4,6-dione-based polymer:ITIC solar cells

    KAUST Repository

    Yang, Fan

    2017-08-15

    We report a systematic study of the efficiency limitations of non-fullerene organic solar cells that exhibit a small energy loss (Eloss) between the polymer donor and the non-fullerene acceptor. To clarify the impact of Eloss on the performance of the solar cells, three thieno[3,4-c]pyrrole-4,6-dione-based conjugated polymers (PTPD3T, PTPD2T, and PTPDBDT) are employed as the electron donor, which all have complementary absorption spectra compared with the ITIC acceptor. The corresponding photovoltaic devices show that low Eloss (0.54 eV) in PTPDBDT:ITIC leads to a high open-circuit voltage (Voc) of 1.05 V, but also to a small quantum efficiency, and in turn photocurrent. The high Voc or small energy loss in the PTPDBDT-based solar cells is a consequence of less non-radiative recombination, whereas the low quantum efficiency is attributed to the unfavorable micro-phase separation, as confirmed by the steady-state and time-resolved photoluminescence experiments, grazing-incidence wide-angle X-ray scattering, and resonant soft X-ray scattering (R-SoXS) measurements. We conclude that to achieve high performance non-fullerene solar cells, it is essential to realize a large Voc with small Eloss while simultaneously maintaining a high quantum efficiency by manipulating the molecular interaction in the bulk-heterojunction.

  14. Performance limitations in thieno[3,4-c]pyrrole-4,6-dione-based polymer:ITIC solar cells

    KAUST Repository

    Yang, Fan; Qian, Deping; Balawi, Ahmed Hesham; Wu, Yang; Ma, Wei; Laquai, Fré dé ric; Tang, Zheng; Zhang, Fengling; Li, Weiwei

    2017-01-01

    We report a systematic study of the efficiency limitations of non-fullerene organic solar cells that exhibit a small energy loss (Eloss) between the polymer donor and the non-fullerene acceptor. To clarify the impact of Eloss on the performance of the solar cells, three thieno[3,4-c]pyrrole-4,6-dione-based conjugated polymers (PTPD3T, PTPD2T, and PTPDBDT) are employed as the electron donor, which all have complementary absorption spectra compared with the ITIC acceptor. The corresponding photovoltaic devices show that low Eloss (0.54 eV) in PTPDBDT:ITIC leads to a high open-circuit voltage (Voc) of 1.05 V, but also to a small quantum efficiency, and in turn photocurrent. The high Voc or small energy loss in the PTPDBDT-based solar cells is a consequence of less non-radiative recombination, whereas the low quantum efficiency is attributed to the unfavorable micro-phase separation, as confirmed by the steady-state and time-resolved photoluminescence experiments, grazing-incidence wide-angle X-ray scattering, and resonant soft X-ray scattering (R-SoXS) measurements. We conclude that to achieve high performance non-fullerene solar cells, it is essential to realize a large Voc with small Eloss while simultaneously maintaining a high quantum efficiency by manipulating the molecular interaction in the bulk-heterojunction.

  15. Material limitations on the detection limit in refractometry.

    Science.gov (United States)

    Skafte-Pedersen, Peder; Nunes, Pedro S; Xiao, Sanshui; Mortensen, Niels Asger

    2009-01-01

    We discuss the detection limit for refractometric sensors relying on high-Q optical cavities and show that the ultimate classical detection limit is given by min {Δn} ≳ η, with n + iη being the complex refractive index of the material under refractometric investigation. Taking finite Q factors and filling fractions into account, the detection limit declines. As an example we discuss the fundamental limits of silicon-based high-Q resonators, such as photonic crystal resonators, for sensing in a bio-liquid environment, such as a water buffer. In the transparency window (λ ≳ 1100 nm) of silicon the detection limit becomes almost independent on the filling fraction, while in the visible, the detection limit depends strongly on the filling fraction because the silicon absorbs strongly.

  16. Development of a PZT-based wireless digital monitor for composite impact monitoring

    International Nuclear Information System (INIS)

    Liu, Peipei; Yuan, Shenfang; Qiu, Lei

    2012-01-01

    One of the major concerns in the whole lifetime of composite materials in aircraft is their susceptibility to impact damage. And there has existed a need in recent years to develop an online structural health monitoring (SHM) system for impact monitoring. This paper proposes a new PZT-based wireless digital impact monitoring system development method aimed at giving a localized area for further inspection. Based on this method, a PZT-based wireless digital impact monitor (WDIM) with advantages of compactness, light weight, low power consumption and high efficiency is developed. Differently from conventional SHM systems, the complex analog circuits are removed and the whole process is achieved in a digital way by turning the output of the PZT sensor directly into a digital queue through a comparator. A simple but efficient sub-region location method is implemented in a field programmable gate array (FPGA) as the processing core of the WDIM to detect and record the impact events. In addition, wireless communication technology is used in the WDIM to transmit data and form a monitoring network. To illustrate the capability of the WDIM, a complete process dealing with an impact event is investigated and the stability of the WDIM is also evaluated in this paper. The WDIM shows its potential for real online applications in aircraft. (paper)

  17. Nitrogen critical loads using biodiversity-related critical limits

    International Nuclear Information System (INIS)

    Posch, Maximilian; Aherne, Julian; Hettelingh, Jean-Paul

    2011-01-01

    Critical loads are widely used in the effects-based assessment of emission reduction policies. While the impacts of acidification have diminished, there is increasing concern regarding the effects of nitrogen deposition on terrestrial ecosystems. In this context much attention has been focussed on empirical critical loads as well as simulations with linked geochemistry-vegetation models. Surprisingly little attention has been paid to adapt the widely used simple mass balance approach. This approach has the well-established benefit of easy regional applicability, while incorporating specified critical chemical criteria to protect specified receptors. As plant occurrence/biodiversity is related to both the nutrient and acidity status of an ecosystem, a single abiotic factor (chemical criterion) is not sufficient. Rather than an upper limit for deposition (i.e., critical load), linked nutrient nitrogen and acidity chemical criteria for plant occurrence result in an 'optimal' nitrogen and sulphur deposition envelope. - Highlights: → Mass balance critical load approaches for nutrient nitrogen remain useful. → Biodiversity-related limits are related to nutrient and acidity status. → Nutrient and acidity chemical criteria lead to optimal deposition envelopes. → Optimal loads support effects-based emission reduction policies. - Biodiversity-related critical limits lead to optimal nitrogen and sulphur deposition envelopes for plant species or species compositions.

  18. Current Guidelines Have Limited Applicability to Patients with Comorbid Conditions: A Systematic Analysis of Evidence-Based Guidelines

    Science.gov (United States)

    Lugtenberg, Marjolein; Burgers, Jako S.; Clancy, Carolyn; Westert, Gert P.; Schneider, Eric C.

    2011-01-01

    Background Guidelines traditionally focus on the diagnosis and treatment of single diseases. As almost half of the patients with a chronic disease have more than one disease, the applicability of guidelines may be limited. The aim of this study was to assess the extent that guidelines address comorbidity and to assess the supporting evidence of recommendations related to comorbidity. Methodology/Principal Findings We conducted a systematic analysis of evidence-based guidelines focusing on four highly prevalent chronic conditions with a high impact on quality of life: chronic obstructive pulmonary disease, depressive disorder, diabetes mellitus type 2, and osteoarthritis. Data were abstracted from each guideline on the extent that comorbidity was addressed (general comments, specific recommendations), the type of comorbidity discussed (concordant, discordant), and the supporting evidence of the comorbidity-related recommendations (level of evidence, translation of evidence). Of the 20 guidelines, 17 (85%) addressed the issue of comorbidity and 14 (70%) provided specific recommendations on comorbidity. In general, the guidelines included few recommendations on patients with comorbidity (mean 3 recommendations per guideline, range 0 to 26). Of the 59 comorbidity-related recommendations provided, 46 (78%) addressed concordant comorbidities, 8 (14%) discordant comorbidities, and for 5 (8%) the type of comorbidity was not specified. The strength of the supporting evidence was moderate for 25% (15/59) and low for 37% (22/59) of the recommendations. In addition, for 73% (43/59) of the recommendations the evidence was not adequately translated into the guidelines. Conclusions/Significance Our study showed that the applicability of current evidence-based guidelines to patients with comorbid conditions is limited. Most guidelines do not provide explicit guidance on treatment of patients with comorbidity, particularly for discordant combinations. Guidelines should be more

  19. Quality in home-based childcare : Impact and improvement

    NARCIS (Netherlands)

    Groeneveld, Marilene Gerarda

    2010-01-01

    The thesis ‘Quality in home-based childcare: Impact and improvement’ consists of two studies. The general aim of the first study is to examine children’s stress levels and wellbeing, and the role of caregiver stress and childcare quality. This first study is described in chapters 2, 3, and 4.

  20. Reconstruction for limited-projection fluorescence molecular tomography based on projected restarted conjugate gradient normal residual.

    Science.gov (United States)

    Cao, Xu; Zhang, Bin; Liu, Fei; Wang, Xin; Bai, Jing

    2011-12-01

    Limited-projection fluorescence molecular tomography (FMT) can greatly reduce the acquisition time, which is suitable for resolving fast biology processes in vivo but suffers from severe ill-posedness because of the reconstruction using only limited projections. To overcome the severe ill-posedness, we report a reconstruction method based on the projected restarted conjugate gradient normal residual. The reconstruction results of two phantom experiments demonstrate that the proposed method is feasible for limited-projection FMT. © 2011 Optical Society of America

  1. Ribota pasiūla kaip pardavimo skatinimo priemonė: ‘Limited Edition’ poveikis vartotojo ketinimui pirkti

    OpenAIRE

    Sinkevičiūtė, Monika

    2017-01-01

    The aim of Master thesis is to evaluate the impact of ‘Limited Edition’ on consumers’ intention to make a purchase in order to create the empirical model of scarcity-basedLimited Edition’ promotional technique. This thesis consists of three parts. In order to achieve this aim, in the first part, the analysis of scientific books and articles was carried out in the literature analysis. In this part, the concept of sales promotion and tools, the effect of scarcity and its types and ‘Limited Ed...

  2. Impacts of Community-Based Natural Resource Management on Wealth, Food Security and Child Health in Tanzania.

    Science.gov (United States)

    Pailler, Sharon; Naidoo, Robin; Burgess, Neil D; Freeman, Olivia E; Fisher, Brendan

    2015-01-01

    Community-based natural resource management (CBNRM) is a major global strategy for enhancing conservation outcomes while also seeking to improve rural livelihoods; however, little evidence of socioeconomic outcomes exists. We present a national-level analysis that empirically estimates socioeconomic impacts of CBNRM across Tanzania, while systematically controlling for potential sources of bias. Specifically, we apply a difference-in-differences model to national-scale, cross-sectional data to estimate the impact of three different CBNRM governance regimes on wealth, food security and child health, considering differential impacts of CBNRM on wealthy and poor populations. We also explore whether or not longer-standing CBNRM efforts provide more benefits than recently-established CBNRM areas. Our results show significant improvements in household food security in CBNRM areas compared with non-CBNRM areas, but household wealth and health outcomes in children are generally not significantly different. No one CBNRM governance regime demonstrates consistently different welfare outcomes than the others. Wealthy households benefit more from CBNRM than poor households and CBNRM benefits appear to increase with longer periods of implementation. Perhaps evidence of CBNRM benefits is limited because CBNRM hasn't been around long enough to yield demonstrable outcomes. Nonetheless, achieving demonstrable benefits to rural populations will be crucial for CBNRM's future success in Tanzania.

  3. Assessment of the impact strength of the denture base resin polymerized by various processing techniques

    Directory of Open Access Journals (Sweden)

    Rajashree Jadhav

    2013-01-01

    Full Text Available Aim : To measure the impact strength of denture base resins polymerized using short and long curing cycles by water bath, pressure cooker and microwave techniques. Materials and Methods: For impact strength testing, 60 samples were made. The sample dimensions were 60 mm × 12 mm × 3 mm, as standardized by the American Standards for Testing and Materials (ASTM. A digital caliper was used to locate the midpoint of sample. The impact strength was measured in IZOD type of impact tester using CEAST Impact tester. The pendulum struck the sample and it broke. The energy required to break the sample was measured in Joules. Data were analyzed using Student′s " t" test. Results: There was statistically significant difference in the impact strength of denture base resins polymerized by long curing cycle and short curing cycle in each technique, with the long curing processing being the best. Conclusion: The polymerization technique plays an important role in the influence of impact strength in the denture base resin. This research demonstrates that the denture base resin polymerized by microwave processing technique possessed the highest impact strength.

  4. Epidemiology and history of knee injury and its impact on activity limitation among football premier league professional referees.

    Science.gov (United States)

    Mahdavi Mohtasham, Hamid; Shahrbanian, Shahnaz; Khoshroo, Fatemeh

    2018-01-01

    The purpose of this study was to determine the epidemiology and history of knee injury and its impact on activity limitation among football premier league professional referees in Iran. This was a descriptive study. 59 Football Premier League professional referees participated in the study. The knee injury related information such as injury history and mechanism was recorded. Injury related symptoms and their impacts on the activity limitation, ability to perform activities of daily living as well participation in sports and recreational activities was obtained through the Knee Outcome Survey (KOS). The results indicated that 31 out of 59 participants reported the history of knee injury. In addition, 18.6%, 22.4% and 81% of the referees reported that they had been injured during the last 6 months of the last year, and at some point in their refereeing careers, respectively. Results further indicated that 48.8% of the injuries occurred in the non-dominant leg and they occurred more frequently during training sessions (52%). Furthermore, the value of KOS was 85 ± 13 for Activities of Daily Living subscale and 90 ± 9 for Sports and Recreational Activities subscale of the KOS. Knee injury was quite common among the Football Premier League professional referees. It was also indicated that the injuries occurred mainly due to insufficient physical fitness. Therefore, it is suggested that football referees undergo the proper warm-up program to avoid knee injury.

  5. Impact of managed moorland burning on peat nutrient and base cation status

    Science.gov (United States)

    Palmer, Sheila; Gilpin, Martin; Wearing, Catherine; Johnston, Kerrylyn; Holden, Joseph; Brown, Lee

    2013-04-01

    Controlled 'patch' burning of moorland vegetation has been used for decades in the UK to stimulate growth of heather (Calluna vulgaris) for game bird habitat and livestock grazing. Typically small patches (300-900 m2) are burned in rotations of 8-25 years. However, our understanding of the short-to-medium term environmental impacts of the practice on these sensitive upland areas has so far been limited by a lack of scientific data. In particular the effect of burning on concentrations of base cations and acid-base status of these highly organic soils has implications both for ecosystem nutrient status and for buffering of acidic waters. As part of the EMBER project peat chemistry data were collected in ten upland blanket peat catchments in the UK. Five catchments were subject to a history of prescribed rotational patch burning. The other five catchments acted as controls which were not subject to burning, nor confounded by other detrimental activities such as drainage or forestry. Soil solution chemistry was also monitored at two intensively studied sites (one regularly burned and one control). Fifty-centimetre soil cores, sectioned into 5-cm intervals, were collected from triplicate patches of four burn ages at each burned site, and from twelve locations at similar hillslope positions at each control site. At the two intensively monitored sites, soil solution chemistry was monitored at four depths in each patch. Across all sites, burned plots had significantly smaller cation exchange capacities, lower concentrations of exchangeable base cations and increased concentrations of exchangeable H+ and Al3+ in near-surface soil. C/N ratios were also lower in burned compared to unburned surface soils. There was no consistent trend between burn age and peat chemistry across all burned sites, possibly reflecting local controls on post-burn recovery rates or external influences on burn management decisions. At the intensively monitored site, plots burned less than two years

  6. An estimation of tritium inventory limits for the E-Area vaults

    International Nuclear Information System (INIS)

    Yu, A.D.; Cook, J.R.

    1991-01-01

    At the request of Waste Management, Interim Waste Technology has conducted a modeling study to estimate the tritium inventory limits for the E-Area vaults. These inventory limits are based on the groundwater impact of the planned waste disposal. The tritium inventory limit for an Intermediate Level Tritium Vault (ILTV) is estimated to be 400,000 Curies with a 100 year storage period. During this period, it is assumed that the ILTV will be vented, any leachate will be extracted, and its performance will be carefully monitored. The tritium inventory limits for a Low Activity Waste Vault (LAWV) and an Intermediate Level Non-Tritium Vault (ILNTV) are estimated to be 15,000 and 11,000 Curies, respectively. Venting and leachate extraction were not assumed necessary. These operational alternatives would further enhance the performance of these vaults. These limits are significantly higher than the forecasted maximum tritium inventories for the vaults. Details of the modeling study are described in the attached report

  7. Current Treatment Limitations in Age-Related Macular Degeneration and Future Approaches Based on Cell Therapy and Tissue Engineering

    Science.gov (United States)

    Fernández-Robredo, P.; Sancho, A.; Johnen, S.; Recalde, S.; Gama, N.; Thumann, G.; Groll, J.; García-Layana, A.

    2014-01-01

    Age-related macular degeneration (AMD) is the leading cause of blindness in the Western world. With an ageing population, it is anticipated that the number of AMD cases will increase dramatically, making a solution to this debilitating disease an urgent requirement for the socioeconomic future of the European Union and worldwide. The present paper reviews the limitations of the current therapies as well as the socioeconomic impact of the AMD. There is currently no cure available for AMD, and even palliative treatments are rare. Treatment options show several side effects, are of high cost, and only treat the consequence, not the cause of the pathology. For that reason, many options involving cell therapy mainly based on retinal and iris pigment epithelium cells as well as stem cells are being tested. Moreover, tissue engineering strategies to design and manufacture scaffolds to mimic Bruch's membrane are very diverse and under investigation. Both alternative therapies are aimed to prevent and/or cure AMD and are reviewed herein. PMID:24672707

  8. Managing nuclear waste: Social and economic impacts

    International Nuclear Information System (INIS)

    Hemphill, R.C.; Bassett, G.W. Jr.

    1993-01-01

    Recent research has focused on perceptions of risk as a dominant source of economic impacts due to siting a high level radioactive waste facility. This article addresses the social and economic considerations involved with the issue of risk perception and other types of negative imagery. Emphasis is placed on ways of measuring the potential for economic effects resulting from perceptions prior to construction and operation of HLW facility. We describe the problems in arriving at defensible estimates of economic impacts. Our review has found that although legal and regulatory bases may soon allow inclusion of these impacts in EIS and for compensation purposes, credible scientific methods do not currently exist for predicting the existence or magnitude of changes in economic decision-making. Policy-makers should recognize the potential for perception-based economic impacts in determining the location and means of managing radioactive waste; but, they also need be cognizant of the current limitations of quantitative estimates of impacts in this area

  9. Managing nuclear waste: Social and economic impacts

    International Nuclear Information System (INIS)

    Hemphill, R.C.; Bassett, G.W. Jr.

    1993-01-01

    Recent research has focused on perceptions of risk dominant source of economic impacts due to siting a high level radioactive waste facility. This article addresses the social and economic considerations involved with the issue of risk perception and other types of negative imagery. Emphasis is placed on ways of measuring the potential for economic effects resulting from perceptions prior to construction and operation of a HLW facility. We describe the problems in arriving at defensible estimates of economic impacts. Our review has found that although legal and regulatory bases may soon allow inclusion of these impacts in EIS and for compensation purposes, credible scientific methods do not currently exist for predicting the existence or magnitude of changes in economic decision-making. Policy-makers should recognize the potential for perception-based economic impacts in determining the location and means of managing radioactive waste; but, they also need be cognizant of the current limitations of quantitative estimates of impacts in this area

  10. Material Limitations on the Detection Limit in Refractometry

    Directory of Open Access Journals (Sweden)

    Niels Asger Mortensen

    2009-10-01

    Full Text Available We discuss the detection limit for refractometric sensors relying on high-Q optical cavities and show that the ultimate classical detection limit is given by min {Δn} ≳ η with n + iη being the complex refractive index of the material under refractometric investigation. Taking finite Q factors and filling fractions into account, the detection limit declines. As an example we discuss the fundamental limits of silicon-based high-Q resonators, such as photonic crystal resonators, for sensing in a bio-liquid environment, such as a water buffer. In the transparency window (λ ≳ 1100 nm of silicon the detection limit becomes almost independent on the filling fraction, while in the visible, the detection limit depends strongly on the filling fraction because the silicon absorbs strongly.

  11. The effect of minimum impact education on visitor spatial behavior in parks and protected areas: An experimental investigation using GPS-based tracking.

    Science.gov (United States)

    Kidd, Abigail M; Monz, Christopher; D'Antonio, Ashley; Manning, Robert E; Reigner, Nathan; Goonan, Kelly A; Jacobi, Charles

    2015-10-01

    The unmanaged impacts of recreation and tourism can often result in unacceptable changes in resource conditions and quality of the visitor experience. Minimum impact visitor education programs aim to reduce the impacts of recreation by altering visitor behaviors. Specifically, education seeks to reduce impacts resulting from lack of knowledge both about the consequences of one's actions and impact-minimizing best practices. In this study, three different on-site minimum impact education strategies ("treatments") and a control condition were applied on the trails and summit area of Sargent Mountain in Acadia National Park, Maine. Treatment conditions were designed to encourage visitors to stay on marked trails and minimize off-trail travel. Treatments included a message delivered via personal contact, and both an ecological-based message and an amenity-based message posted on signs located alongside the trail. A control condition of current trail markings and directional signs was also assessed. The efficacy of the messaging was evaluated through the use of Global Positioning System (GPS) tracking of visitor spatial behavior on/off trails. Spatial analysis of GPS tracks revealed statistically significant differences among treatments, with the personal contact treatment yielding significantly less dispersion of visitors on the mountain summit. Results also indicate that the signs deployed in the study were ineffective at limiting off-trail use beyond what can be accomplished with trail markers and directional signs. These findings suggest that personal contact by a uniformed ranger or volunteer may be the most effective means of message delivery for on-site minimum impact education. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. A statistical proposal for environmental impact assessment of development projects

    International Nuclear Information System (INIS)

    Plazas C, Julian A; De J Lema T, Alvaro; Leon P, Juan Diego

    2009-01-01

    Environmental impact assessment of development projects is a fundamental process, which main goal is to avoid that their construction and functioning, lead to serious and negative consequences on the environment. Some of the most important limitations of the models employed to assess environmental impacts, are the subjectivity of its parameters and weights, and the multicolineality among the variables, which represent high quantities of similar information. This work presents a multivariate statistical-based method that tries to diminish such limitations. For this purpose, environmental impact assessment, is valuated through different environmental impact attributes and environmental elements, synthesized in an environmental quality index (ICA in Spanish). ICA can be applied at different levels, such as at a project level, or applied only at a partial level on one or some environmental components.

  13. Chip-integrated optical power limiter based on an all-passive micro-ring resonator

    Science.gov (United States)

    Yan, Siqi; Dong, Jianji; Zheng, Aoling; Zhang, Xinliang

    2014-10-01

    Recent progress in silicon nanophotonics has dramatically advanced the possible realization of large-scale on-chip optical interconnects integration. Adopting photons as information carriers can break the performance bottleneck of electronic integrated circuit such as serious thermal losses and poor process rates. However, in integrated photonics circuits, few reported work can impose an upper limit of optical power therefore prevent the optical device from harm caused by high power. In this study, we experimentally demonstrate a feasible integrated scheme based on a single all-passive micro-ring resonator to realize the optical power limitation which has a similar function of current limiting circuit in electronics. Besides, we analyze the performance of optical power limiter at various signal bit rates. The results show that the proposed device can limit the signal power effectively at a bit rate up to 20 Gbit/s without deteriorating the signal. Meanwhile, this ultra-compact silicon device can be completely compatible with the electronic technology (typically complementary metal-oxide semiconductor technology), which may pave the way of very large scale integrated photonic circuits for all-optical information processors and artificial intelligence systems.

  14. Resolution and systematic limitations in beam based alignment

    Energy Technology Data Exchange (ETDEWEB)

    Tenenbaum, P.G.

    2000-03-15

    Beam based alignment of quadrupoles by variation of quadrupole strength is a widely-used technique in accelerators today. The authors describe the dominant systematic limitation of this technique, which arises from the change in the center position of the quadrupole as the strength is varied, and derive expressions for the resulting error. In addition, the authors derive an expression for the statistical resolution of such techniques in a periodic transport line, given knowledge of the line's transport matrices, the resolution of the beam position monitor system, and the details of the strength variation procedure. These results are applied to the Next Linear Collider main linear accelerator, an 11 kilometer accelerator containing 750 quadrupoles and 5,000 accelerator structures. The authors find that in principle a statistical resolution of 1 micron is easily achievable but the systematic error due to variation of the magnetic centers could be several times larger.

  15. Perceived risk impacts from siting hazardous waste facilities

    International Nuclear Information System (INIS)

    Hemphill, R.C.; Edwards, B.K.; Bassett, G.W. Jr.

    1992-01-01

    This paper describes methods for evaluating perception-based economic impacts resulting from siting hazardous waste facilities. Socioeconomic impact analysis has devoted increasing attention to the potential implications of changed public perceptions of risk due to an activity or situation. This contrasts with traditional socioecconomic impact analysis, which has been limited to measuring direct and indirect consequences of activities, e.g., the employment effects of placing a military base in a specified location. Approaches to estimating economic impacts due to changes in public perceptions are ex ante or ex post. The former predict impacts prior to the construction and operation of a facility, while the later is based on impacts that become evident only when the facility is up and running. The theoretical foundations and practical requirements for demonstrating impacts, resulting from the siting of a hazardous facility are described. The theoretical rationale supporting the study of perceived risk research is presented along with discussion of problems that arise in demonstrating the existence and measuring the quantitative importance of economic impacts due to changes in perceived risk. The high-level nuclear waste facility being considered in Nevada is presented as an example in which there is potential for impacts, but where the link between perceived risk and economic conditions has not yet been developed

  16. Perceived risk impacts from siting hazardous waste facilities

    International Nuclear Information System (INIS)

    Hemphill, R.C.; Edwards, B.K.; Bassett, G.W. Jr.

    1992-01-01

    This paper describes methods for evaluating perception-based economic impacts resulting from siting hazardous waste facilities. Socioeconomic impact analysis has devoted increasing attention to the potential implications of changed public perceptions of risk due to an activity or situation. This contrasts with traditional socioeconomic impact analysis, which has been limited to measuring direct and indirect consequences of activities, e.g., the employment effects of placing a military base in a specified location. Approaches to estimating economic impacts due to changes in public perceptions are ex ante or ex post. The former predict impacts prior to the construction and operation of a facility, while the later is based on impacts that become evident only when the facility is up and running. The theoretical foundations and practical requirements for demonstrating impacts resulting from the siting of a hazardous facility are described. The theoretical rationale supporting the study of perceived risk research is presented along with discussion of problems that arise in demonstrating the existence and measuring the quantitative importance of economic impacts due to changes in perceived risk. The high-level nuclear waste facility being considered in Nevada is presented as an example in which there is potential for impacts, but where the link between perceived risk and economic conditions has not yet been developed

  17. Climate agreements under limited participation, asymmetric information and market imperfections

    Energy Technology Data Exchange (ETDEWEB)

    Hagem, Cathrine

    1996-12-31

    This thesis relates to climate agreements and cost efficiency by analysing the formation of a system of quota leading to distributed discharge of emissions between countries. Main fields concerned are the greenhouse effect, the political process, efficient and cost-effective climate agreements, and climate agreements under limited participation, asymmetric information and market imperfections covering fields like limited participation in climate agreements, limited participation and indirect impact on non-participating countries` emissions, limited participation and direct impact on non-participating countries` emissions under asymmetric information, and non-competitive market for tradeable quotas. 166 refs., 7 tabs.

  18. 75 FR 57762 - MATEP Limited Partnership; MATEP LLC; Supplemental Notice That Initial Market-Based Rate Filing...

    Science.gov (United States)

    2010-09-22

    ...-000] MATEP Limited Partnership; MATEP LLC; Supplemental Notice That Initial Market-Based Rate Filing... the above-referenced proceeding of MATEP Limited Partnership and MATEP LLC's application for market... liability. Any person desiring to intervene or to protest should file with the Federal Energy Regulatory...

  19. Argentinean soy-based biodiesel: An introduction to production and impacts

    International Nuclear Information System (INIS)

    Tomei, Julia; Upham, Paul

    2009-01-01

    This paper explores the economic, social and environmental context, drivers and impacts of increased demand for Argentine soy-based biodiesel. It is based on extensive stakeholder interviews in Argentina, including those in government, academia and the third sector; as well as participant observation with communities in soy cultivation areas; and review of relevant academic and grey literatures. Given Argentina's history of political instability and relatively weak levels of environmental protection, there is reason to be sceptical of the likely effectiveness of biofuel sustainability certification as applied to Argentine soy. Direct contracts between feedstock producers and biodiesel retailers may be a more reliable approach to minimise adverse environmental and social impacts than certification alone.

  20. Analysis of the economic impact of different Chinese climate policy options based on a CGE model incorporating endogenous technological change

    International Nuclear Information System (INIS)

    Wang Ke; Wang Can; Chen Jining

    2009-01-01

    Abatement cost is the main concern for climate change mitigation and the key factor for mitigation cost is technological change. This study established an integrated economic, energy, environmental, dynamic, computable general equilibrium (CGE) model representing endogenous technological change for China's climate change policy analysis. This study analyzed and compared the economic impact of different approaches to mitigation commitments as well as the potential role of technological change in the formulation of mitigation targets and commitments, taking into account China's climate policy-making needs based on the current international climate negotiation process. The results show that, absolute emission limits similar to the Kyoto Protocol will seriously impede the future economic development of China, while the impact of an 80% reduction in carbon intensity, forecast for 2050 based on the 2005 level, is relatively small. Technological change can promote economic growth, improve energy efficiency and reduce carbon intensity per unit of output through the substitution of production factors. Consequently it can reduce marginal abatement cost and related GDP loss by mitigation. At the same time it can increase mitigation potentials and extend the emission reduction amount, showing that consideration of the impact of technological change when deciding the emission reduction targets is necessary.

  1. Comparison of Thoracic Injury Risk in Frontal Car Crashes for Occupant Restrained without Belt Load Limiters and Those Restrained with 6 kN and 4 kN Belt Load Limiters.

    Science.gov (United States)

    Foret-Bruno, J Y; Trosseille, X; Page, Y; Huère, J F; Le Coz, J Y; Bendjellal, F; Diboine, A; Phalempin, T; Villeforceix, D; Baudrit, P; Guillemot, H; Coltat, J C

    2001-11-01

    In France, as in other countries, accident research studies show that a large proportion of restrained occupants who sustain severe or fatal injuries are involved in frontal impacts (65% and 50%, respectively). In severe frontal impacts with restrained occupants and where intrusion is not preponderant, the oldest occupants very often sustain severe thoracic injuries due to the conventional seat belt. As we have been observing over the last years, we will expect in the coming years developments which include more solidly-built cars, as offset crash test procedures are widely used to evaluate the passive safety of production vehicles. The reduction of intrusion for the most severe frontal impacts, through optimization of car deformation, usually translates into an increase in restraint forces and hence thoracic injury risk with a conventional retractor seat belt for a given impact severity. It is, therefore essential to limit the restraint forces exerted by the seat belt on the thorax in order to reduce the number of road casualties. In order to address thoracic injury risk in frontal impact, Renault cars have been equipped with the Programmed Restraint System (PRS) since 1995. The PRS is a restraint system that combines belt load limitation and pyrotechnic belt pretension. In an initial design of the Programmed Restraint System (PRS1), the belt load limiter was a steel component designed to shear at a given shoulder force, namely 6 kN. It was mounted between the retractor and the lower anchorage point of the belt. The design of the PRS was modified in 1998 (PRS2), but the principle of load limitation was maintained. The threshold was decreased to 4 kN and this lower belt belt-force limiter has been combined with a specially designed airbag. This paper reports on 347 real-world frontal accidents where the EES (Equivalent Energy Speed) ranged from 35 to 75 km/h. One hundred and ninety-eight (198) of these accidents involved cars equipped with the 6 kN load limiter

  2. Pre-Acting Control for Shock and Impact Isolation Systems

    Directory of Open Access Journals (Sweden)

    D.V. Balandin

    2005-01-01

    Full Text Available Pre-acting control in shock/impact isolation systems is studied. With pre-acting control, the isolation system begins to respond to an impact before this impact has been applied to the base. The limiting performance of the isolator with pre-acting control is investigated for a single-degree-of-freedom system subject to an instantaneous impact. The isolation performance index is defined as the maximum of the absolute value of the displacement of the object to be isolated relative to the base, provided that the magnitude of the control force transmitted to the object does not exceed a prescribed value. It is shown that there is a substantial advantage in the use of pre-acting isolators over isolators without pre-action. Particular attention is given to a pre-acting isolator based on a passive elastic element (a spring separating the object to be protected from the base. An example illustrates the calculation of the design parameters of such an isolator.

  3. 10 CFR 51.49 - Environmental report-limited work authorization.

    Science.gov (United States)

    2010-01-01

    ... reduce environmental impacts. (b) Phased application for limited work authorization and construction... where an environmental impact statement was prepared, but the facility construction was not completed... Commission has previously prepared an environmental impact statement for the construction and operation of a...

  4. Knockouts of high-ranking males have limited impact on baboon social networks.

    Science.gov (United States)

    Franz, Mathias; Altmann, Jeanne; Alberts, Susan C

    Social network structures can crucially impact complex social processes such as collective behaviour or the transmission of information and diseases. However, currently it is poorly understood how social networks change over time. Previous studies on primates suggest that `knockouts' (due to death or dispersal) of high-ranking individuals might be important drivers for structural changes in animal social networks. Here we test this hypothesis using long-term data on a natural population of baboons, examining the effects of 29 natural knockouts of alpha or beta males on adult female social networks. We investigated whether and how knockouts affected (1) changes in grooming and association rates among adult females, and (2) changes in mean degree and global clustering coefficient in these networks. The only significant effect that we found was a decrease in mean degree in grooming networks in the first month after knockouts, but this decrease was rather small, and grooming networks rebounded to baseline levels by the second month after knockouts. Taken together our results indicate that the removal of high-ranking males has only limited or no lasting effects on social networks of adult female baboons. This finding calls into question the hypothesis that the removal of high-ranking individuals has a destabilizing effect on social network structures in social animals.

  5. Etiology and management of esophageal food impaction: a population based study.

    Science.gov (United States)

    Gretarsdottir, Helga M; Jonasson, Jon Gunnlaugur; Björnsson, Einar S

    2015-05-01

    Esophageal food impaction (FI) is a common clinical problem with limited information on incidence. Previous population based studies are lacking. The incidence, main etiological factors, recurrence and outcome of FI was determined in the present study in a population based setting. This was a study of consecutive adult patients who presented with FI from 2008 to 2013 at the National University Hospital of Iceland. The mean crude incidence rate of FI was calculated. Retrospective analysis was undertaken on relevant clinical data such as type of bolus, management, complications, recurrence rate, risk factors for recurrence, and outcome. Overall 308 patients had endoscopically confirmed FI, males 199/308 (65%), median age 62 years. The mean crude incidence was 25 per 100,000 inhabitants per year. The types of FI was meat (68%), fish (12%), vegetable (4%) and other food/objects (16%). Causes for the FI included: esophageal strictures (45%), hiatal hernia (22%), eosinophilic esophagitis (EoE) (16%) and esophageal carcinoma (2%). Recurrence appeared in 21%, in which 24/48 (50%) had EoE vs. 40/260 (15%) in others (p = 0.0001). The removal of the foreign body was successful in 98% of the cases during the first endoscopy. Endoscopic associated complications included four (1.3%) aspirations, one (0.3%) esophageal perforation and one Boerhaave syndrome at presentation (both had EoE). The incidence of FI is the highest reported to date. EoE was strongly associated with recurrence of FI. In a population based setting endoscopy is a safe and effective procedure for removing FI.

  6. Inviscid incompressible limits on expanding domains

    Czech Academy of Sciences Publication Activity Database

    Feireisl, Eduard; Nečasová, Šárka; Sun, Y.

    2014-01-01

    Roč. 27, č. 10 (2014), s. 2465-2477 ISSN 0951-7715 R&D Projects: GA ČR GA13-00522S Institutional support: RVO:67985840 Keywords : compressible Navier-Stokes system * large domain * inviscid limit * incompressible limit Subject RIV: BA - General Mathematics Impact factor: 1.208, year: 2014 http://iopscience.iop.org/0951-7715/27/10/2465/

  7. Impurity transport calculations for the limiter shadow region of a tokamak

    International Nuclear Information System (INIS)

    Claassen, H.A.; Repp, H.

    1981-01-01

    Impurity transport calculations are presented for the scrape-off layer of a tokamak with a poloidal ring limiter. The theory is based on the drift-kinetic equations for the impurity ions in their different ionization states. It is developed in the limit of low impurity concentrations under due consideration of electron impact ionization, Coulomb collisions with hydrogen ions streaming onto a neutralizing surface, a convection along the magnetic field, and a radial drift. The background plasma and the impurity sources at the walls enter the theory as input parameters. Numerical results are given for the radial profiles of density, temperature, particle flux, and energy flux of wall-released impurity ions as well as for the screening efficiency of the scrape-off layer neglecting impurity re-emission from the limiter. (author)

  8. Prediction of stress- and strain-based forming limits of automotive thin sheets by numerical, theoretical and experimental methods

    Science.gov (United States)

    Béres, Gábor; Weltsch, Zoltán; Lukács, Zsolt; Tisza, Miklós

    2018-05-01

    Forming limit is a complex concept of limit values related to the onset of local necking in the sheet metal. In cold sheet metal forming, major and minor limit strains are influenced by the sheet thickness, strain path (deformation history) as well as material parameters and microstructure. Forming Limit Curves are plotted in ɛ1 - ɛ2 coordinate system providing the classic strain-based Forming Limit Diagram (FLD). Using the appropriate constitutive model, the limit strains can be changed into the stress-based Forming Limit Diagram (SFLD), irrespective of the strain path. This study is about the effect of the hardening model parameters on defining of limit stress values during Nakazima tests for automotive dual phase (DP) steels. Five limit strain pairs were specified experimentally with the loading of five different sheet geometries, which performed different strain-paths from pure shear (-2ɛ2=ɛ1) up to biaxial stretching (ɛ2=ɛ1). The former works of Hill, Levy-Tyne and Keeler-Brazier made possible some kind of theoretical strain determination, too. This was followed by the stress calculation based on the experimental and theoretical strain data. Since the n exponent in the Nádai expression is varying with the strain at some DP steels, we applied the least-squares method to fit other hardening model parameters (Ludwik, Voce, Hockett-Sherby) to calculate the stress fields belonging to each limit strains. The results showed that each model parameters could produce some discrepancies between the limit stress states in the range of higher equivalent strains than uniaxial stretching. The calculated hardening models were imported to FE code to extend and validate the results by numerical simulations.

  9. An evaluation of a risk-based environmental regulation in Brazil: Limitations to risk management of hazardous installations

    International Nuclear Information System (INIS)

    Naime, Andre

    2017-01-01

    The environmental regulation of hazardous projects with risk-based decision-making processes can lead to a deficient management of human exposure to technological hazards. Such an approach for regulation is criticized for simplifying the complexity of decisions involving the economic, social, and environmental aspects of the installation and operation of hazardous facilities in urban areas. Results of a Brazilian case study indicate that oil and gas transmission pipelines may represent a threat to diverse communities if the relationship between such linear projects and human populations is overlooked by regulatory bodies. Results also corroborate known challenges to the implementation of EIA processes and outline limitations to an effective environmental and risk management. Two preliminary topics are discussed to strengthen similar regulatory practices. Firstly, an effective integration between social impact assessment and risk assessment in EIA processes to have a more comprehensive understanding of the social fabric. Secondly, the advancement of traditional management practices for hazardous installations to pursue a strong transition from assessment and evaluation to management and control and to promote an effective interaction between land-use planning and environmental regulation.

  10. An evaluation of a risk-based environmental regulation in Brazil: Limitations to risk management of hazardous installations

    Energy Technology Data Exchange (ETDEWEB)

    Naime, Andre, E-mail: andre.naime.ibama@gmail.com

    2017-03-15

    The environmental regulation of hazardous projects with risk-based decision-making processes can lead to a deficient management of human exposure to technological hazards. Such an approach for regulation is criticized for simplifying the complexity of decisions involving the economic, social, and environmental aspects of the installation and operation of hazardous facilities in urban areas. Results of a Brazilian case study indicate that oil and gas transmission pipelines may represent a threat to diverse communities if the relationship between such linear projects and human populations is overlooked by regulatory bodies. Results also corroborate known challenges to the implementation of EIA processes and outline limitations to an effective environmental and risk management. Two preliminary topics are discussed to strengthen similar regulatory practices. Firstly, an effective integration between social impact assessment and risk assessment in EIA processes to have a more comprehensive understanding of the social fabric. Secondly, the advancement of traditional management practices for hazardous installations to pursue a strong transition from assessment and evaluation to management and control and to promote an effective interaction between land-use planning and environmental regulation.

  11. Internal noise sources limiting contrast sensitivity.

    Science.gov (United States)

    Silvestre, Daphné; Arleo, Angelo; Allard, Rémy

    2018-02-07

    Contrast sensitivity varies substantially as a function of spatial frequency and luminance intensity. The variation as a function of luminance intensity is well known and characterized by three laws that can be attributed to the impact of three internal noise sources: early spontaneous neural activity limiting contrast sensitivity at low luminance intensities (i.e. early noise responsible for the linear law), probabilistic photon absorption at intermediate luminance intensities (i.e. photon noise responsible for de Vries-Rose law) and late spontaneous neural activity at high luminance intensities (i.e. late noise responsible for Weber's law). The aim of this study was to characterize how the impact of these three internal noise sources vary with spatial frequency and determine which one is limiting contrast sensitivity as a function of luminance intensity and spatial frequency. To estimate the impact of the different internal noise sources, the current study used an external noise paradigm to factorize contrast sensitivity into equivalent input noise and calculation efficiency over a wide range of luminance intensities and spatial frequencies. The impact of early and late noise was found to drop linearly with spatial frequency, whereas the impact of photon noise rose with spatial frequency due to ocular factors.

  12. Reliability based impact localization in composite panels using Bayesian updating and the Kalman filter

    Science.gov (United States)

    Morse, Llewellyn; Sharif Khodaei, Zahra; Aliabadi, M. H.

    2018-01-01

    In this work, a reliability based impact detection strategy for a sensorized composite structure is proposed. Impacts are localized using Artificial Neural Networks (ANNs) with recorded guided waves due to impacts used as inputs. To account for variability in the recorded data under operational conditions, Bayesian updating and Kalman filter techniques are applied to improve the reliability of the detection algorithm. The possibility of having one or more faulty sensors is considered, and a decision fusion algorithm based on sub-networks of sensors is proposed to improve the application of the methodology to real structures. A strategy for reliably categorizing impacts into high energy impacts, which are probable to cause damage in the structure (true impacts), and low energy non-damaging impacts (false impacts), has also been proposed to reduce the false alarm rate. The proposed strategy involves employing classification ANNs with different features extracted from captured signals used as inputs. The proposed methodologies are validated by experimental results on a quasi-isotropic composite coupon impacted with a range of impact energies.

  13. Distributional Aspects of Climate Change Impacts

    International Nuclear Information System (INIS)

    Tol, R.S.J. Tol; Kuik, O.J.; Downing, T.; Smith, J.B.

    2003-01-01

    This paper gives a brief review about the state of knowledge on the distributional aspects of climate change impacts. The paper is largely limited to the distribution of impacts between countries (in Section 2). Although there are virtually no estimates reported in the literature, the distribution of impacts within countries is also important. Impact estimates for different sectors (agriculture, health, sea level rise) provides little guidance for estimating differential impacts within countries. It is even harder to find estimates based on social classes. The paper restricts itself to equity about the consequences of climate change. Equity issues about the consequences of emission reduction are ignored here, but should of course be part of a policy analysis. Equity issues about procedures for decision making are also ignored. The paper is organised as follows. Section 2 reviews recent estimates of the regional impacts of climate change. Section 3 discusses alternative ways of aggregating regional impact estimates. Section 4 focusses on the vulnerability of the poor to climate change impacts, both with respect to exposure as well as to their limited capacity for adaptation. Section 5 discusses the impacts of economic development and other dynamic changes on vulnerability. The paper abstains from a discussion of aggregating climate change impacts over time, partly because the literature on that is too substantial to be reviewed here, and partly because, under virtually all scenarios, the current generation is the poorest and therefore particularly worthy in equity considerations. In Section 6 we present salient conclusions

  14. Speckle disturbance limit in laser-based cinema projection systems

    Science.gov (United States)

    Verschaffelt, Guy; Roelandt, Stijn; Meuret, Youri; van den Broeck, Wendy; Kilpi, Katriina; Lievens, Bram; Jacobs, An; Janssens, Peter; Thienpont, Hugo

    2015-09-01

    In a multi-disciplinary effort, we investigate the level of speckle that can be tolerated in a laser cinema projector based on a quality of experience experiment with movie clips shown to a test audience in a real-life movie theatre setting. We identify a speckle disturbance threshold by statistically analyzing the observers’ responses for different values of the amount of speckle, which was monitored using a well-defined speckle measurement method. The analysis shows that the speckle perception of a human observer is not only dependent on the objectively measured amount of speckle, but it is also strongly influenced by the image content. The speckle disturbance limit for movies turns out to be substantially larger than that for still images, and hence is easier to attain.

  15. Upper limit for context-based crop classification in robotic weeding applications

    DEFF Research Database (Denmark)

    Midtiby, Henrik Skov; Åstrand, Björn; Jørgensen, Ole

    2016-01-01

    Knowledge of the precise position of crop plants is a prerequisite for effective mechanical weed control in robotic weeding application such as in crops like sugar beets which are sensitive to mechanical stress. Visual detection and recognition of crop plants based on their shapes has been...... described many times in the literature. In this paper the potential of using knowledge about the crop seed pattern is investigated based on simulated output from a perception system. The reliability of position–based crop plant detection is shown to depend on the weed density (ρ, measured in weed plants per...... square metre) and the crop plant pattern position uncertainty (σx and σy, measured in metres along and perpendicular to the crop row, respectively). The recognition reliability can be described with the positive predictive value (PPV), which is limited by the seeding pattern uncertainty and the weed...

  16. Reliability Evaluation of Bridges Based on Nonprobabilistic Response Surface Limit Method

    Directory of Open Access Journals (Sweden)

    Xuyong Chen

    2017-01-01

    Full Text Available Due to many uncertainties in nonprobabilistic reliability assessment of bridges, the limit state function is generally unknown. The traditional nonprobabilistic response surface method is a lengthy and oscillating iteration process and leads to difficultly solving the nonprobabilistic reliability index. This article proposes a nonprobabilistic response surface limit method based on the interval model. The intention of this method is to solve the upper and lower limits of the nonprobabilistic reliability index and to narrow the range of the nonprobabilistic reliability index. If the range of the reliability index reduces to an acceptable accuracy, the solution will be considered convergent, and the nonprobabilistic reliability index will be obtained. The case study indicates that using the proposed method can avoid oscillating iteration process, make iteration process stable and convergent, reduce iteration steps significantly, and improve computational efficiency and precision significantly compared with the traditional nonprobabilistic response surface method. Finally, the nonprobabilistic reliability evaluation process of bridge will be built through evaluating the reliability of one PC continuous rigid frame bridge with three spans using the proposed method, which appears to be more simple and reliable when lack of samples and parameters in the bridge nonprobabilistic reliability evaluation is present.

  17. Internet-based peer support for Ménière's disease: a summary of web-based data collection, impact evaluation, and user evaluation.

    Science.gov (United States)

    Pyykkő, Ilmari; Manchaiah, Vinaya; Levo, Hilla; Kentala, Erna; Juhola, Martti

    2017-07-01

    This paper presents a summary of web-based data collection, impact evaluation, and user evaluations of an Internet-based peer support program for Ménière's disease (MD). The program is written in html-form. The data are stored in a MySQL database and uses machine learning in the diagnosis of MD. The program works interactively with the user and assesses the participant's disorder profile in various dimensions (i.e., symptoms, impact, personal traits, and positive attitude). The inference engine uses a database to compare the impact with 50 referents, and provides regular feedback to the user. Data were analysed using descriptive statistics and regression analysis. The impact evaluation was based on 740 cases and the user evaluation on a sample of 75 cases of MD respectively. The web-based system was useful in data collection and impact evaluation of people with MD. Among those with a recent onset of MD, 78% rated the program as useful or very useful, whereas those with chronic MD rated the program 55%. We suggest that a web-based data collection and impact evaluation for peer support can be helpful while formulating the rehabilitation goals of building the self-confidence needed for coping and increasing social participation.

  18. Climate impacts of bioenergy: Inclusion of carbon cycle and albedo dynamics in life cycle impact assessment

    International Nuclear Information System (INIS)

    Bright, Ryan M.; Cherubini, Francesco; Strømman, Anders H.

    2012-01-01

    Life cycle assessment (LCA) can be an invaluable tool for the structured environmental impact assessment of bioenergy product systems. However, the methodology's static temporal and spatial scope combined with its restriction to emission-based metrics in life cycle impact assessment (LCIA) inhibits its effectiveness at assessing climate change impacts that stem from dynamic land surface–atmosphere interactions inherent to all biomass-based product systems. In this paper, we focus on two dynamic issues related to anthropogenic land use that can significantly influence the climate impacts of bioenergy systems: i) temporary changes to the terrestrial carbon cycle; and ii) temporary changes in land surface albedo—and illustrate how they can be integrated within the LCA framework. In the context of active land use management for bioenergy, we discuss these dynamics and their relevancy and outline the methodological steps that would be required to derive case-specific biogenic CO 2 and albedo change characterization factors for inclusion in LCIA. We demonstrate our concepts and metrics with application to a case study of transportation biofuel sourced from managed boreal forest biomass in northern Europe. We derive GWP indices for three land management cases of varying site productivities to illustrate the importance and need to consider case- or region-specific characterization factors for bioenergy product systems. Uncertainties and limitations of the proposed metrics are discussed. - Highlights: ► A method for including temporary surface albedo and carbon cycle changes in Life Cycle Impact Assessment (LCIA) is elaborated. ► Concepts are applied to a single bioenergy case whereby a range of feedstock productivities are shown to influence results. ► Results imply that case- and site-specific characterization factors can be essential for a more informed impact assessment. ► Uncertainties and limitations of the proposed methodologies are elaborated.

  19. Does query expansion limit our learning? A comparison of social-based expansion to content-based expansion for medical queries on the internet.

    Science.gov (United States)

    Pentoney, Christopher; Harwell, Jeff; Leroy, Gondy

    2014-01-01

    Searching for medical information online is a common activity. While it has been shown that forming good queries is difficult, Google's query suggestion tool, a type of query expansion, aims to facilitate query formation. However, it is unknown how this expansion, which is based on what others searched for, affects the information gathering of the online community. To measure the impact of social-based query expansion, this study compared it with content-based expansion, i.e., what is really in the text. We used 138,906 medical queries from the AOL User Session Collection and expanded them using Google's Autocomplete method (social-based) and the content of the Google Web Corpus (content-based). We evaluated the specificity and ambiguity of the expansion terms for trigram queries. We also looked at the impact on the actual results using domain diversity and expansion edit distance. Results showed that the social-based method provided more precise expansion terms as well as terms that were less ambiguous. Expanded queries do not differ significantly in diversity when expanded using the social-based method (6.72 different domains returned in the first ten results, on average) vs. content-based method (6.73 different domains, on average).

  20. An open simulation approach to identify chances and limitations for vulnerable road user (VRU) active safety.

    Science.gov (United States)

    Seiniger, Patrick; Bartels, Oliver; Pastor, Claus; Wisch, Marcus

    2013-01-01

    It is commonly agreed that active safety will have a significant impact on reducing accident figures for pedestrians and probably also bicyclists. However, chances and limitations for active safety systems have only been derived based on accident data and the current state of the art, based on proprietary simulation models. The objective of this article is to investigate these chances and limitations by developing an open simulation model. This article introduces a simulation model, incorporating accident kinematics, driving dynamics, driver reaction times, pedestrian dynamics, performance parameters of different autonomous emergency braking (AEB) generations, as well as legal and logical limitations. The level of detail for available pedestrian accident data is limited. Relevant variables, especially timing of the pedestrian appearance and the pedestrian's moving speed, are estimated using assumptions. The model in this article uses the fact that a pedestrian and a vehicle in an accident must have been in the same spot at the same time and defines the impact position as a relevant accident parameter, which is usually available from accident data. The calculations done within the model identify the possible timing available for braking by an AEB system as well as the possible speed reduction for different accident scenarios as well as for different system configurations. The simulation model identifies the lateral impact position of the pedestrian as a significant parameter for system performance, and the system layout is designed to brake when the accident becomes unavoidable by the vehicle driver. Scenarios with a pedestrian running from behind an obstruction are the most demanding scenarios and will very likely never be avoidable for all vehicle speeds due to physical limits. Scenarios with an unobstructed person walking will very likely be treatable for a wide speed range for next generation AEB systems.

  1. Tailored scenarios for streamflow climate change impacts based on the perturbation of precipitation and evapotranspiration

    Science.gov (United States)

    Ntegeka, Victor; Willems, Patrick; Baguis, Pierre; Roulin, Emmanuel

    2015-04-01

    It is advisable to account for a wide range of uncertainty by including the maximum possible number of climate models and scenarios for future impacts. As this is not always feasible, impact assessments are inevitably performed with a limited set of scenarios. The development of tailored scenarios is a challenge that needs more attention as the number of available climate change simulations grows. Whether these scenarios are representative enough for climate change impacts is a question that needs addressing. This study presents a methodology of constructing tailored scenarios for assessing runoff flows including extreme conditions (peak flows) from an ensemble of future climate change signals of precipitation and potential evapotranspiration (ETo) derived from the climate model simulations. The aim of the tailoring process is to formulate scenarios that can optimally represent the uncertainty spectrum of climate scenarios. These tailored scenarios have the advantage of being few in number as well as having a clear description of the seasonal variation of the climate signals, hence allowing easy interpretation of the implications of future changes. The tailoring process requires an analysis of the hydrological impacts from the likely future change signals from all available climate model simulations in a simplified (computationally less expensive) impact model. Historical precipitation and ETo time series are perturbed with the climate change signals based on a quantile perturbation technique that accounts for the changes in extremes. For precipitation, the change in wetday frequency is taken into account using a markov-chain approach. Resulting hydrological impacts from the perturbed time series are then subdivided into high, mean and low hydrological impacts using a quantile change analysis. From this classification, the corresponding precipitation and ETo change factors are back-tracked on a seasonal basis to determine precipitation-ETo covariation. The

  2. Impacts and limitations of medialization thyroplasty on swallowing function of patients with unilateral vocal fold paralysis.

    Science.gov (United States)

    Tateya, Ichiro; Hirano, Shigeru; Kishimoto, Yo; Suehiro, Atsushi; Kojima, Tsuyohi; Ohno, Satoshi; Ito, Juichi

    2010-11-01

    Medialization thyroplasty was effective in improving swallowing function as well as vocal function in most cases with unilateral vocal fold paralysis. The impact of medialization thryoplasty was insufficient for the case with severe atrophy and that in which the vocal fold was fixed in the lateral position. To evaluate the impacts and limitations of medialization thyroplasty on swallowing function of the patients with unilateral vocal fold paralysis. Eight cases (mean age 68.5 years) with unilateral vocal fold paralysis chiefly complaining of swallowing disturbance were studied. All patients underwent thyroplasty type I. The causes of the paralysis were lung cancer in four cases, esophageal cancer in one case, aortic aneurysm in one case, subarachnoid hemorrhage in one case, and unknown in one case. Subjective swallowing function score, maximum phonation time (MPT), mean flow rate (MFR), amplitude perturbation quotient (APQ), and pitch perturbation quotient (PPQ) were examined pre- and postoperatively. The swallowing score improved in all except two cases. However, bilateral thryoplasty was necessary for the case with severe vocal fold atrophy and arytenoid adduction was needed for the case in which the vocal fold was fixed in the lateral position. The swallowing score, MPT, and MFR showed significant improvement after surgery.

  3. Air pollution impacts of speed limitation measures in large cities: The need for improving traffic data in a metropolitan area

    Science.gov (United States)

    Baldasano, José M.; Gonçalves, María; Soret, Albert; Jiménez-Guerrero, Pedro

    2010-08-01

    Assessing the effects of air quality management strategies in urban areas is a major concern worldwide because of the large impacts on health caused by the exposure to air pollution. In this sense, this work analyses the changes in urban air quality due to the introduction of a maximum speed limit to 80 km h -1 on motorways in a large city by using a novel methodology combining traffic assimilation data and modelling systems implemented in a supercomputing facility. Albeit the methodology has been non-specifically developed and can be extrapolated to any large city or megacity, the case study of Barcelona is presented here. Hourly simulations take into account the entire year 2008 (when the 80 km h -1 limit has been introduced) vs. the traffic conditions for the year 2007. The data has been assimilated in an emission model, which considers hourly variable speeds and hourly traffic intensity in the affected area, taken from long-term measurement campaigns for the aforementioned years; it also permits to take into account the traffic congestion effect. Overall, the emissions are reduced up to 4%; however the local effects of this reduction achieve an important impact for the adjacent area to the roadways, reaching 11%. In this sense, the speed limitation effects assessed represent enhancements in air quality levels (5-7%) of primary pollutants over the area, directly improving the welfare of 1.35 million inhabitants (over 41% of the population of the Metropolitan Area) and affecting 3.29 million dwellers who are potentially benefited from this strategy for air quality management (reducing 0.6% the mortality rates in the area).

  4. Risk assessment of hazardous impacts on urbanization and industrialization activities based upon toxic substances

    Directory of Open Access Journals (Sweden)

    T. Salem

    2016-03-01

    Full Text Available A risk assessment study was conducted to predict the expected hazardous influence on the ecosystem resulted from urbanization and industrialization activities at Helwan area, Egypt. To achieve these goals, soils, plants and water samples were collected from Helwan area, and their total concentrations of inorganic contaminants (Cd, Cr, Co, Cu, Fe, Mn, Ni, Pb, and Zn and organic pollutants; such as Phenol and hydrocarbons were measured. The obtained results showed that, the concentrations of organic contaminants in water streams and surrounding soils recorded high concentration values than the permissible limits, while inorganic elements were within the safe limits for irrigation. In addition, soils irrigated with the effluents of industrial units recorded high values of inorganic and organic contaminants. Consequently, the levels of these contaminants were high in plant tissues grown thereon; especially the edible parts. Risk assessment based on available Predicted No Effect Concentration values for the aquatic and terrestrial environment was performed. Inorganic elements were expected to cause serious hazard problems for both aquatic organisms and soil microorganisms. The impact of these pollutants on human health was calculated using daily metals intake of inorganic metals via consumption of edible plants. Hazard index values proved that concentrations of Cr may cause serious hazard problems for humans in this area; especially, children.

  5. Implementation impacts of PRL methodology

    International Nuclear Information System (INIS)

    Caudill, J.A.; Krupa, J.F.; Meadors, R.E.; Odum, J.V.; Rodrigues, G.C.

    1993-02-01

    This report responds to a DOE-SR request to evaluate the impacts from implementation of the proposed Plutonium Recovery Limit (PRL) methodology. The PRL Methodology is based on cost minimization for decisions to discard or recover plutonium contained in scrap, residues, and other plutonium bearing materials. Implementation of the PRL methodology may result in decisions to declare as waste certain plutonium bearing materials originally considered to be a recoverable plutonium product. Such decisions may have regulatory impacts, because any material declared to be waste would immediately be subject to provisions of the Resource Conservation and Recovery Act (RCRA). The decision to discard these materials will have impacts on waste storage, treatment, and disposal facilities. Current plans for the de-inventory of plutonium processing facilities have identified certain materials as candidates for discard based upon the economic considerations associated with extending the operating schedules for recovery of the contained plutonium versus potential waste disposal costs. This report evaluates the impacts of discarding those materials as proposed by the F Area De-Inventory Plan and compares the De-Inventory Plan assessments with conclusions from application of the PRL. The impact analysis was performed for those materials proposed as potential candidates for discard by the De-Inventory Plan. The De-Inventory Plan identified 433 items, containing approximately 1% of the current SRS Pu-239 inventory, as not appropriate for recovery as the site moves to complete the mission of F-Canyon and FB-Line. The materials were entered into storage awaiting recovery as product under the Department's previous Economic Discard Limit (EDL) methodology which valued plutonium at its incremental cost of production in reactors. An application of Departmental PRLs to the subject 433 items revealed that approximately 40% of them would continue to be potentially recoverable as product plutonium

  6. The beam-beam limit in asymmetric colliders: Optimization of the B-factory parameter base

    International Nuclear Information System (INIS)

    Tennyson, J.L.

    1990-01-01

    This paper presents a general theory of the beam-beam limit in symmetric and asymmetric lepton ring colliders. It shows how the beam-beam limit in these accelerators affects the maximum attainable luminosity and presents a specific algorithm for parameter base optimization. It is shown that the special problems inherent in asymmetric colliders derive not from the asymmetry, but from the fact that the two beams must be in different rings. Computer simulation experiments are used to demonstrate the various phenomena discussed in the theory

  7. Limiting overselling in international emissions trading 1: Costs and environmental impacts of alternative proposals

    Energy Technology Data Exchange (ETDEWEB)

    Haites, E.; Missfeldt, F.

    2002-07-01

    Emission trading allows a country with an emission limitation commitment, an Annex B Party, to sell parts of its assigned amount (AAUs) to other Annex B Parties. If the seller subsequently does not have sufficient AAUs to cover its actual emissions it will be subject to the penalties for non-compliance. The revenue from the sale of AAUs may exceed the sanctions for non-compliance if these penalties are weak or difficult to enforce. Under these circumstances emission trading enables a country to benefit financially through non-compliance. Liability proposals seek to ensure that non-compliance is not rewarded, by limiting sales of AAUs to amounts surplus to the seller's compliance needs. This study develops and applies a model to assess the performance of different liability proposals. A simple model based on the Emissions Projection and Policy Analysis (EPPA) model of the Massachusetts Institute of Technology is used for the analysis. (BA)

  8. Limit lines for risk

    International Nuclear Information System (INIS)

    Cox, D.C.; Baybutt, P.

    1982-01-01

    Approaches to the regulation of risk from technological systems, such as nuclear power plants or chemical process plants, in which potential accidents may result in a broad range of adverse consequences must take into account several different aspects of risk. These include overall or average risk, accidents posing high relative risks, the rate at which accident probability decreases with increasing accident consequences, and the impact of high frequency, low consequence accidents. A hypothetical complementary cumulative distribution function (CCDF), with appropriately chosen parametric form, meets all these requirements. The Farmer limit line, by contrast, places limits on the risks due to individual accident sequences, and cannot adequately account for overall risk. This reduces its usefulness as a regulatory tool. In practice, the CCDF is used in the Canadian nuclear licensing process, while the Farmer limit line approach, supplemented by separate qualitative limits on overall risk, is employed in the United Kingdom

  9. Game Immersion Experience: Its Hierarchical Structure and Impact on Game-Based Science Learning

    Science.gov (United States)

    Cheng, M.-T.; She, H.-C.; Annetta, L. A.

    2015-01-01

    Many studies have shown the positive impact of serious educational games (SEGs) on learning outcomes. However, there still exists insufficient research that delves into the impact of immersive experience in the process of gaming on SEG-based science learning. The dual purpose of this study was to further explore this impact. One purpose was to…

  10. Estimating the Lower Limit of the Impact of Amines on Nucleation in the Earth’s Atmosphere

    Directory of Open Access Journals (Sweden)

    Alexey B. Nadykto

    2015-04-01

    Full Text Available Amines, organic derivatives of NH3, are important common trace atmospheric species that can enhance new particle formation in the Earth’s atmosphere under favorable conditions. While methylamine (MA, dimethylamine (DMA and trimethylamine (TMA all efficiently enhance binary nucleation, MA may represent the lower limit of the enhancing effect of amines on atmospheric nucleation. In the present paper, we report new thermochemical data concerning MA-enhanced nucleation, which were obtained using the DFT PW91PW91/6-311++G (3df, 3pd method, and investigate the enhancement in production of stable pre-nucleation clusters due to the MA. We found that the MA ternary nucleation begins to dominate over ternary nucleation of sulfuric acid, water and ammonia at [MA]/[NH3] > ~10−3. This means that under real atmospheric conditions ([MA] ~ 1 ppt, [NH3] ~ 1 ppb the lower limit of the enhancement due to methylamines is either close to or higher than the typical effect of NH3. A very strong impact of the MA is observed at low RH; however it decreases quickly as the RH grows. Low RH and low ambient temperatures were found to be particularly favorable for the enhancement in production of stable sulfuric acid-water clusters due to the MA.

  11. Systems-design and energy-balance considerations for impact fusion

    International Nuclear Information System (INIS)

    Krakowski, R.A.; Miller, R.L.

    1979-01-01

    Areas of concern and potential problems for impact fusion are qualitatively considered within an overall systems context. A parametric and qualitative description of the general energy balance and systems considerations for an Impact Fusion Reactor (IFR) design is discussed. Reactor systems design considerations for an IFR are presented. An attempt to assess the IFR viability is made based on highly simplified but limiting projectile-target energy balances and thermonuclear burn models

  12. Video-coaching as biofeedback tool to improve gated treatments. Possibilities and limitations

    International Nuclear Information System (INIS)

    Cossmann, Peter H.

    2012-01-01

    For respiratory gated radiotherapy the manufacturers of linear accelerators offer dedicated gating technologies. The video-based Varian RPM Gating system (Varian Medical Systems, Palo Alto/CA, USA) includes in a standard configuration a support tool for regular breathing called audiocoaching. As this approach has limitations regarding direct control of the patient's breathing due to a missing feedback, we designed an additional tool offering videocoaching. In order to evaluate the impact of this additional functionality, we measured parameters defining the image quality of 4D-CT data as well as the treatment duration which is mainly influenced by the patient's limited ability to achieve a stable breathing pattern. (orig.)

  13. The impact of coaching module based on teaching games for ...

    African Journals Online (AJOL)

    The impact of coaching module based on teaching games for understanding towards school netball players' performance. ... used attack and defense strategy at the right time and place during netball game. ... AJOL African Journals Online.

  14. Hiding the Source Based on Limited Flooding for Sensor Networks.

    Science.gov (United States)

    Chen, Juan; Lin, Zhengkui; Hu, Ying; Wang, Bailing

    2015-11-17

    Wireless sensor networks are widely used to monitor valuable objects such as rare animals or armies. Once an object is detected, the source, i.e., the sensor nearest to the object, generates and periodically sends a packet about the object to the base station. Since attackers can capture the object by localizing the source, many protocols have been proposed to protect source location. Instead of transmitting the packet to the base station directly, typical source location protection protocols first transmit packets randomly for a few hops to a phantom location, and then forward the packets to the base station. The problem with these protocols is that the generated phantom locations are usually not only near the true source but also close to each other. As a result, attackers can easily trace a route back to the source from the phantom locations. To address the above problem, we propose a new protocol for source location protection based on limited flooding, named SLP. Compared with existing protocols, SLP can generate phantom locations that are not only far away from the source, but also widely distributed. It improves source location security significantly with low communication cost. We further propose a protocol, namely SLP-E, to protect source location against more powerful attackers with wider fields of vision. The performance of our SLP and SLP-E are validated by both theoretical analysis and simulation results.

  15. Impact of Menu Sequencing on Internet-Based Educational Module Selection

    Science.gov (United States)

    Bensley, Robert; Brusk, John J.; Rivas, Jason; Anderson, Judith V.

    2006-01-01

    Patterns of Internet-based menu item selection can occur for a number of reasons, many of which may not be based on interest in topic. It then becomes important to ensure menu order is devised in a way that ensures the greatest accuracy in matching user need with selection. This study examined the impact of menu rotation on the selection of…

  16. A Machine Learning Based Intrusion Impact Analysis Scheme for Clouds

    Directory of Open Access Journals (Sweden)

    Junaid Arshad

    2012-01-01

    Full Text Available Clouds represent a major paradigm shift, inspiring the contemporary approach to computing. They present fascinating opportunities to address dynamic user requirements with the provision of on demand expandable computing infrastructures. However, Clouds introduce novel security challenges which need to be addressed to facilitate widespread adoption. This paper is focused on one such challenge - intrusion impact analysis. In particular, we highlight the significance of intrusion impact analysis for the overall security of Clouds. Additionally, we present a machine learning based scheme to address this challenge in accordance with the specific requirements of Clouds for intrusion impact analysis. We also present rigorous evaluation performed to assess the effectiveness and feasibility of the proposed method to address this challenge for Clouds. The evaluation results demonstrate high degree of effectiveness to correctly determine the impact of an intrusion along with significant reduction with respect to the intrusion response time.

  17. The impact of self-perceived limitations, stigma and sense of coherence on quality of life in multiple sclerosis patients : results of a cross-sectional study

    NARCIS (Netherlands)

    Broersma, Feddrik; Oeseburg, Barth; Dijkstra, Jacob; Wynia, Klaske

    2018-01-01

    OBJECTIVE: To examine the impact of perceived limitations, stigma and sense of coherence on quality of life in multiple sclerosis patients. DESIGN: Cross-sectional survey. SETTING: Department of Neurology, University Medical Center Groningen, the Netherlands. SUBJECTS: Multiple sclerosis patients.

  18. The impact of teachers' limited English proficiency on English ...

    African Journals Online (AJOL)

    The importance of the role of language in teacher education programmes and in children's learning is crucial. This study focuses on the use of English as the language of learning and teaching and its impact on the language development of English second language (ESL) student teachers and ESL learners. Against the ...

  19. The impact of power limitations and adjacent residence interference on the performance of WLANs for home networking applications

    OpenAIRE

    Armour, SMD; Doufexi, A; Lee, BS; Nix, AR; Bull, DR

    2001-01-01

    This paper considers the application of 5 GHz wireless LAN technology to home networking applications. An assessment of physical layer performance is presented for both the IEEE 802.11a and HIPERLAN/2 standards in the form of achievable data rate as a function of received signal to noise ratio. The transmit power limitations imposed by the relevant regulatory bodies are presented and the implications of transmit power amplifier limitations considered. Based on this information, a state of the...

  20. Optimal population prediction of sandhill crane recruitment based on climate-mediated habitat limitations

    Science.gov (United States)

    Gerber, Brian D.; Kendall, William L.; Hooten, Mevin B.; Dubovsky, James A.; Drewien, Roderick C.

    2015-01-01

    Prediction is fundamental to scientific enquiry and application; however, ecologists tend to favour explanatory modelling. We discuss a predictive modelling framework to evaluate ecological hypotheses and to explore novel/unobserved environmental scenarios to assist conservation and management decision-makers. We apply this framework to develop an optimal predictive model for juvenile (time-scales and spring/summer weather affects recruitment.Our predictive modelling framework focuses on developing a single model that includes all relevant predictor variables, regardless of collinearity. This model is then optimized for prediction by controlling model complexity using a data-driven approach that marginalizes or removes irrelevant predictors from the model. Specifically, we highlight two approaches of statistical regularization, Bayesian least absolute shrinkage and selection operator (LASSO) and ridge regression.Our optimal predictive Bayesian LASSO and ridge regression models were similar and on average 37% superior in predictive accuracy to an explanatory modelling approach. Our predictive models confirmed a priori hypotheses that drought and cold summers negatively affect juvenile recruitment in the RMP. The effects of long-term drought can be alleviated by short-term wet spring–summer months; however, the alleviation of long-term drought has a much greater positive effect on juvenile recruitment. The number of freezing days and snowpack during the summer months can also negatively affect recruitment, while spring snowpack has a positive effect.Breeding habitat, mediated through climate, is a limiting factor on population growth of sandhill cranes in the RMP, which could become more limiting with a changing climate (i.e. increased drought). These effects are likely not unique to cranes. The alteration of hydrological patterns and water levels by drought may impact many migratory, wetland nesting birds in the Rocky Mountains and beyond

  1. Response of masonry structure under impact load

    International Nuclear Information System (INIS)

    Makovicka, D.

    1993-01-01

    The paper deals with interaction of a short gaseous impact wave with a plate structure. Analyses of dynamic bending, depending on the parameters of the structure and the impact wave (i.e. the stress and displacement field produced by the resulting incident and reflected wave) have been made by FEM. The calculated data was based on the real material properties of this structure. Pressures greater than computed limit pressures result in the failure of the structure. The calculated and experimental data are compared. (author)

  2. Economic impact of PCI remedies

    International Nuclear Information System (INIS)

    Bairiot, H.

    1980-01-01

    The paper first outlines the data base on which the economic evaluation is performed. It includes: modifications of the design of the fuel; preconditioning of the fuel; ramping limitations; in-core fuel management modifications. The economic assumptions on which the study is performed are also outlined. They are representative of a PWR situation. For what fuel design modifications are concerned, some have a minor cost impact (e.g. pellet density, pellet length to diameter ratio, gap size, etc...), while some others may have a quite large impact on the fissile material cost (e.g. duplex pellet), the fabrication cost (e.g. coating of the cladding ID) or the reprocessing cost (e.g. interlayer between pellet and cladding). The preconditioning of the fuel may require to run the reactor in a mode unrelated to the energy demand. This aspect can be minimized by a proper adjustment of in-core fuel management. The ramping limitation is the most usually adopted approach. Different cases are investigated and the impact on generating cost is discussed. The in-core fuel management can also contribute to a better ramping performance of the fuel. Exemplative cases show that this leads to a minimum cost penalty. (author)

  3. Computer-based medical education in Benha University, Egypt: knowledge, attitude, limitations, and suggestions.

    Science.gov (United States)

    Bayomy, Hanaa; El Awadi, Mona; El Araby, Eman; Abed, Hala A

    2016-12-01

    Computer-assisted medical education has been developed to enhance learning and enable high-quality medical care. This study aimed to assess computer knowledge and attitude toward the inclusion of computers in medical education among second-year medical students in Benha Faculty of Medicine, Egypt, to identify limitations, and obtain suggestions for successful computer-based learning. This was a one-group pre-post-test study, which was carried out on second-year students in Benha Faculty of Medicine. A structured self-administered questionnaire was used to compare students' knowledge, attitude, limitations, and suggestions toward computer usage in medical education before and after the computer course to evaluate the change in students' responses. The majority of students were familiar with use of the mouse and keyboard, basic word processing, internet and web searching, and e-mail both before and after the computer course. The proportion of students who were familiar with software programs other than the word processing and trouble-shoot software/hardware was significantly higher after the course (Pcomputer (P=0.008), the inclusion of computer skills course in medical education, downloading lecture handouts, and computer-based exams (Pcomputers limited the inclusion of computer in medical education (Pcomputer labs, lack of Information Technology staff mentoring, large number of students, unclear course outline, and lack of internet access were more frequently reported before the course (Pcomputer labs, inviting Information Technology staff to support computer teaching, and the availability of free Wi-Fi internet access covering several areas in the university campus; all would support computer-assisted medical education. Medical students in Benha University are computer literate, which allows for computer-based medical education. Staff training, provision of computer labs, and internet access are essential requirements for enhancing computer usage in medical

  4. Study on environmental impact assessment of uranium mining and milling base planning

    International Nuclear Information System (INIS)

    Liu Xiaochao; Song Liquan

    2008-01-01

    Environmental impact assessment (EIA) of project planning is part of strategic EIA, which provides full consideration and evaluation of the potential environmental impact on tiered basis in the process of plan implementation. With account being taken of EIA of uranium mining/milling base and the current situation of mining/milling industry, this paper determined environmental protection objectives of EIA, screened assessment indexes and identified weighting factors. Based on the characteristics of mines planned, restrictive score values are estimated each for EIA weighting factor. Finally some suggestions were made for adjusting the plan. (authors)

  5. The nutritional limitations of plant-based beverages in infancy and childhood.

    Science.gov (United States)

    Vitoria, Isidro

    2017-10-24

    Breastfeeding, infant formula and cow's milk are basic foods in infant nutrition. However, they are being increasingly replaced either totally or partially by plant-based beverages.The composition of 164 plant-based beverages available in Spain was reviewed based on the nutritional labeling of the package and the manufacturers' webpages. This was compared to the composition of cow's milk and infant formula. In addition, the nutritional disease associated with consumption of plant-based beverages in infants and children was reviewed by means of a literature search in Medline and Embase since 1990 based on the key words "plant-based beverages" or "rice beverages" or "almond beverages" or "soy beverages" and "infant" or "child".The nutritional composition of 54 soy beverages, 24 rice beverages, 22 almond beverages, 31 oat beverages, 6 coconut beverages, 12 miscellaneous beverages and 15 mixed beverages was described. At least 30 cases of nutritional disease in children associated with nearly exclusive consumption of plant-based beverages have been published. A characteristic association has been observed between soy beverage and rickets, rice beverage and kwashiorkor, and almond-based beverage and metabolic alkalosis.The nutritional quality of plant-based beverages is lower than that of cow's milk and infant formula, therefore they are not a nutritional alternative. Predominant or exclusive use of these beverages in infant feeding can lead to serious nutritional risks. In the case of nonexclusive feeding with these beverages, the pediatrician should be aware of the nutritional risks and limitations of these beverages in order to complement their deficiencies with other foods.

  6. Provisional thoughts on limitations to the right to procreate ...

    African Journals Online (AJOL)

    ... also had a severe non-intended impact on the social and economic situation in China. It is suggested, therefore, that positive measures (eg proper education and social provision) be considered to limit population growth. KEYWORDS: Limitation of rights; right to procreate; overpopulation; limitation of the right to procreate; ...

  7. Knowledge-based analysis of functional impacts of mutations in ...

    Indian Academy of Sciences (India)

    Knowledge-based analysis of functional impacts of mutations in microRNA seed regions. Supplementary figure 1. Summary of predicted miRNA targets from ... All naturally occurred SNPs in seed regions of human miRNAs. The information of the columns is given in the second sheet. Hihly expressed miRNAs are ...

  8. The Impact of Community Violence on School-Based Research

    Science.gov (United States)

    Velsor-Friedrich, Barbara; Richards, Maryse; Militello, Lisa K.; Dean, Kyle C.; Scott, Darrick; Gross, Israel M.; Romeo, Edna

    2015-01-01

    Research conducted on youth exposure to violence has generally focused on documenting the prevalence of community violence and its emotional and behavioral implications. However, there is a dearth of information related to the impact of violence on the implementation and evaluation of community and school-based programs. This commentary examines…

  9. Actinide solubility in deep groundwaters - estimates for upper limits based on chemical equilibrium calculations

    International Nuclear Information System (INIS)

    Schweingruber, M.

    1983-12-01

    A chemical equilibrium model is used to estimate maximum upper concentration limits for some actinides (Th, U, Np, Pu, Am) in groundwaters. Eh/pH diagrams for solubility isopleths, dominant dissolved species and limiting solids are constructed for fixed parameter sets including temperature, thermodynamic database, ionic strength and total concentrations of most important inorganic ligands (carbonate, fluoride, phosphate, sulphate, chloride). In order to assess conservative conditions, a reference water is defined with high ligand content and ionic strength, but without competing cations. In addition, actinide oxides and hydroxides are the only solid phases considered. Recommendations for 'safe' upper actinide solubility limits for deep groundwaters are derived from such diagrams, based on the predicted Eh/pH domain. The model results are validated as far as the scarce experimental data permit. (Auth.)

  10. Supplemental Environmental Impact Statement for F-35 Beddown at Eglin Air Force Base, Florida

    Science.gov (United States)

    2014-06-26

    IFR instrument flight rules IJTS Initial Joint Training Site ILLUM Illuminating ILS Instrument Landing System IMPLAN an economic impact modeling...Final Supplemental ENVIRONMENTAL IMPACT STATEMENT FOR F-35 BEDDOWN AT EGLIN AIR FORCE BASE, FLORIDA JANUARY 2014 Report Documentation Page Form...Supplemental Environmental Impact Statement 3. DATES COVERED 00-00-2011 to 00-00-2014 4. TITLE AND SUBTITLE Final Supplemental Environmental Impact

  11. Study on environmental impact assessment index system of uranium production base construction plan

    International Nuclear Information System (INIS)

    Liu Xiaochao; Song Liquan

    2008-01-01

    The index system on planning environmental impact assessment of uranium mining base construction is discussed by using the hiberarchy method according to characteristics of uranium production and environmental protection object of planning assessment. The suggested index system is in favor of persistent exploitation of uranium resource and environmental protection in the uranium mining area, and can provide a reference for planning environmental impact assessment of uranium mining base construction in China. (authors)

  12. A general exergy-based environmental impact index

    International Nuclear Information System (INIS)

    Diaz-Mendez, Sosimo E.; Rodriguez-Lelis, Jose Maria; Hernandez-Guerrero, Abel

    2011-01-01

    An ecosystem is a complex system in which biotic and abiotic factors interact and influence each other both directly and indirectly. Each of these factors has to comply with a specific function in the different processes that occur inside the ecosystem, whether transporting or transforming energy or both. When anthropogenic emissions are produced, part of the useful energy of the ecosystem is used to assimilate or absorb those emissions, and the energy spent, loses its function and becomes lost work in accordance with the Gouy-Stodola theorem. Thus, the work that an ecosystem can carry out varies as a function of the lost work produced by anthropogenic sources. The permanency or loss of the ecosystem depends on how many irreversibilities it can support. The second law of thermodynamics through a systematic use of the exergy and lost work is the basis of this paper where a general environmental impact index, based on exergy, is proposed. For the purpose of this work, the ecosystem is divided in subsystems--water, soil, atmosphere, organisms and society- -all of them inter-related. The ideal work variation can be obtained from each subsystem within the selected ecosystem, and a global index can be determined by adding the partial lost work of each subsystem. This global index is then used to determine the trend followed by the ecosystem from its pristine, original or environmental line base state. This environmental impact index applicability is presented for a simple combustion example

  13. The Economic Role and Limitations of Cooperatives: An Investment Cash Flow Derivation

    OpenAIRE

    Peterson, H. Christopher

    1992-01-01

    The economic role and limitations of cooperatives are derived using an approach based on investment cash flows and net present value. Cooperatives are viewed as an option for member investment as well as an option for member patronage. The investment approach yields results similar to the traditional paradigms that focus on patronage. In addition, the approach makes more explicit the impact of member investment on cooperative existence, valuation, performance measurement, and strategy options.

  14. Active superconducting DC fault current limiter based on flux compensation

    International Nuclear Information System (INIS)

    Shi Jing; Tang Yuejin; Wang, Chen; Zhou Yusheng; Li Jingdong; Ren Li; Chen Shijie

    2006-01-01

    With the extensive application of DC power systems, suppression of DC fault current is an important subject that guarantees system security. This paper presents an active superconducting DC fault current limiter (DC-SFCL) based on flux compensation. The DC-SFCL is composed of two superconducting windings wound on a single iron core, the primary winding is in series with DC power system, and the second winding is connected with AC power system through a PWM converter. In normal operating state, the flux in the iron core is compensated to zero, and the SFCL has no influence on DC power system. In the case of DC system accident, through regulating the active power exchange between the SFCL's second winding and the AC power system, the current on the DC side can be limited to different level complying with the system demand. Moreover, the PWM converter that interface the DC system and AC system can be controlled as a reactive power source to supply voltage support for the AC side, which has little influence on the performance of SFCL. Using MATLAB SIMULINK, the mathematic model of the DC-SFCL is created, simulation results validate the dynamics of system, and the performance of DC-SFCL is confirmed

  15. Effects of Moat Wall Impact on the Seismic Response of Base Isolated Nuclear Power Plants

    International Nuclear Information System (INIS)

    Kim, Min Kyu; Kim, Jung Han; Mosqueda, Gilberto; Sarebanhab, Alireza

    2015-01-01

    The objectives of this study are to examine the effects of impact on the response of seismically isolated NPPs and identify characteristics of the isolation hardware and hard stop that minimize these effects. Considering variable distances to the hard stop and properties of the moat wall, the amplification in response is reported for acceleration and floor spectral accelerations at different points along the height of a NPP containment structure. Base isolation can be an effective strategy to protect critical facilities such as Nuclear Power Plants (NPPs) from the damaging effects of horizontal earthquake ground shaking. To be effective in reducing accelerations and deformations of the structure above, the seismic isolation bearings can be subjected to large displacements. In the case of an extreme earthquake, bearing displacements need to be limited by a hard stop in order to prevent failure of the bearings. Impact to the hard stop, which is often the moat wall at the basement level, is also of significant concern due to the potential for increased transfer of forces and amplification in response of the structural system, piping and other contents. However, the consequences of impact or factors important to mitigate its effects are not very well understood. The main findings of this study are related to modeling of NPP with moat wall in OpenSees and LSDyna as well as observations resulting from the parametric study of the performance of the NPP under different intensity levels of seismic excitations for different properties of the moat wall and bearings. • Variation in the isolator properties should be considered when examining seismic pounding. For BDBE even, 58.5 % cases result to the impact for lower bound properties while this value was 5.5 % for upper bound properties. Since the impact results are dependent to the assumed bearing properties, a better range of properties can be obtained from experimental testing of the bearing under large shear strains.

  16. Discussion on the method of environmental radiological impact assessment for the highway construction project

    International Nuclear Information System (INIS)

    Qiu Guohua

    2008-01-01

    Based on the characteristics and environmental radiological impact of the highway construction project, the basic procedure of environmental radiological impact assessment for the highway construction project is put forward, including analysis and determination of contamination sources, selection of evaluation factors, determination of assessment range and dose limit, environmental investigation, environmental impact prediction and assessment. The working method of each procedure is analyzed. (authors)

  17. Regulation of the transfer market in professional Russian football: impact of the limit for legionaries in 2005–2016

    Directory of Open Access Journals (Sweden)

    Kseniya A. Andreeva

    2017-06-01

    Full Text Available Objective to estimate the efficiency of limit for legionaries as a tool for regulating the Russian transfer market. Methods formal methods of the labor market supply and demand model combinatory analysis statistical methods. Results the article views the order of regulation of the labor relations with foreign legionaries in sports. It is defined that in most countries regulation implies limitation of the number of legionaries who can be claimed for the season or be on the field. The article analyzes the approaches to the transfer market regulation methods as well as the arguments for and against limiting the number of legionaries. Basing on the analysis of literature the author estimates the efficiency of transfer market regulating from the economics viewpoint as well as the results of sports events. The author checks the hypothesis about the inefficiency of the limit as a tool for increasing the quality of the Russian playersrsquo performance based on a number of indicators such as the inefficiency of the national teamrsquos performance number of legionaries their performance etc. The estimation was carried out on the basis of a number of theoretical models 1 model of increasing the footballersrsquo salaries 2 model of free selection of players by the coach and 3 model of quality playersrsquo selection. Basing on these models the hypothesis was disproved of the rapid ldquovictory effectrdquo from the limit ndash the first significant results of the regulation appeared in Russia not earlier than after 10 years. It is supposed that the limit can be explained by G. Akerlofrsquos model by controlling the number of legionaries it is possible to attract more qualified foreign players into the national league. Analysis of the Russian teamsrsquo experience showed that the limit has not resulted in 1 the increase of the legionariesrsquo quality of performance 2 the increase of the playing time of the Russian players on the field in the national

  18. Cost-effectiveness and budget impact analysis of a population-based screening program for colorectal cancer.

    Science.gov (United States)

    Pil, L; Fobelets, M; Putman, K; Trybou, J; Annemans, L

    2016-07-01

    Colorectal cancer (CRC) is one of the leading causes of cancer mortality in Belgium. In Flanders (Belgium), a population-based screening program with a biennial immunochemical faecal occult blood test (iFOBT) in women and men aged 56-74 has been organised since 2013. This study assessed the cost-effectiveness and budget impact of the colorectal population-based screening program in Flanders (Belgium). A health economic model was conducted, consisting of a decision tree simulating the screening process and a Markov model, with a time horizon of 20years, simulating natural progression. Predicted mortality and incidence, total costs, and quality-adjusted life-years (QALYs) with and without the screening program were calculated in order to determine the incremental cost-effectiveness ratio of CRC screening. Deterministic and probabilistic sensitivity analyses were conducted, taking into account uncertainty of the model parameters. Mortality and incidence were predicted to decrease over 20years. The colorectal screening program in Flanders is found to be cost-effective with an ICER of 1681/QALY (95% CI -1317 to 6601) in males and €4,484/QALY (95% CI -3254 to 18,163). The probability of being cost-effective given a threshold of €35,000/QALY was 100% and 97.3%, respectively. The budget impact analysis showed the extra cost for the health care payer to be limited. This health economic analysis has shown that despite the possible adverse effects of screening and the extra costs for the health care payer and the patient, the population-based screening program for CRC in Flanders is cost-effective and should therefore be maintained. Copyright © 2016 European Federation of Internal Medicine. Published by Elsevier B.V. All rights reserved.

  19. Hiding the Source Based on Limited Flooding for Sensor Networks

    Directory of Open Access Journals (Sweden)

    Juan Chen

    2015-11-01

    Full Text Available Wireless sensor networks are widely used to monitor valuable objects such as rare animals or armies. Once an object is detected, the source, i.e., the sensor nearest to the object, generates and periodically sends a packet about the object to the base station. Since attackers can capture the object by localizing the source, many protocols have been proposed to protect source location. Instead of transmitting the packet to the base station directly, typical source location protection protocols first transmit packets randomly for a few hops to a phantom location, and then forward the packets to the base station. The problem with these protocols is that the generated phantom locations are usually not only near the true source but also close to each other. As a result, attackers can easily trace a route back to the source from the phantom locations. To address the above problem, we propose a new protocol for source location protection based on limited flooding, named SLP. Compared with existing protocols, SLP can generate phantom locations that are not only far away from the source, but also widely distributed. It improves source location security significantly with low communication cost. We further propose a protocol, namely SLP-E, to protect source location against more powerful attackers with wider fields of vision. The performance of our SLP and SLP-E are validated by both theoretical analysis and simulation results.

  20. An Approach to Assess Observation Impact Based on Observation-Minus-Forecast Residuals

    Science.gov (United States)

    Todling, Ricardo

    2009-01-01

    Langland and Baker (2004) introduced an approach to assess the impact of observations on the forecasts. In that, a state-space aspect of the forecast is defined and a procedure is derived that relates changes in the aspect with changes in the initial conditions associated with the assimilation of observations) ultimately providing information about the impact of individual observations on the forecast. Some features of the approach are to be noted. The typical choice of forecast aspect employed in related works is rather arbitrary and leads to an incomplete assessment of the observing system. Furthermore, the state-space forecast aspect requires availability of a verification state that should ideally be uncorrelated with the forecast but in practice is not. Lastly, the approach involves the adjoint operator of the entire data assimilation system and as such it is constrained by the validity of this operator. In this presentation, an observation-space metric is used that, for a relatively time-homogeneous observing system, allows inferring observation impact on the forecast without some of the limitations above. Specifically, using observation-minus-forecast residuals leads to an approach with the following features: (i) it suggests a rather natural choice of forecast aspect, directly linked to the analysis system and providing full assessment of the observations; (ii) it naturally avoids introducing undesirable correlations in the forecast aspect by verifying against the observations; and (iii) it does not involve linearization and use of adjoints; therefore being applicable to any length of forecast. The state and observation-space approaches might be complementary to some degree, and involve different limitations and complexities. Illustrations are given using the NASA GEOS-5 data.

  1. The inclusion of biodiversity in environmental impact assessment: Policy-related progress limited by gaps and semantic confusion.

    Science.gov (United States)

    Bigard, Charlotte; Pioch, Sylvain; Thompson, John D

    2017-09-15

    Natural habitat loss and fragmentation, as a result of development projects, are major causes of biodiversity erosion. Environmental impact assessment (EIA) is the most commonly used site-specific planning tool that takes into account the effects of development projects on biodiversity by integrating potential impacts into the mitigation hierarchy of avoidance, reduction, and offset measures. However, the extent to which EIA fully address the identification of impacts and conservation stakes associated with biodiversity loss has been criticized in recent work. In this paper we examine the extent to which biodiversity criteria have been integrated into 42 EIA from 2006 to 2016 for small development projects in the Montpellier Metropolitan territory in southern France. This study system allowed us to question how EIA integrates biodiversity impacts on a scale relevant to land-use planning. We examine how biodiversity inclusion has changed over time in relation to new policy for EIA and how the mitigation hierarchy is implemented in practice and in comparison with national guidelines. We demonstrate that the inclusion of biodiversity features into EIA has increased significantly in relation to policy change. Several weaknesses nevertheless persist, including the continued absence of substitution solution assessment, a correct analysis of cumulative impacts, the evaluation of impacts on common species, the inclusion of an ecological network scale, and the lack of monitoring and evaluation measures. We also show that measures for mitigation hierarchy are primarily associated with the reduction of impacts rather than their avoidance, and avoidance and offset measures are often misleadingly proposed in EIA. There is in fact marked semantic confusion between avoidance, reduction and offset measures that may impair stakeholders' understanding. All in all, reconsideration of stakeholders routine practices associated with a more strategic approach towards impact anticipation

  2. Effects of population based screening for Chlamydia infections in the Netherlands limited by declining participation rates.

    Directory of Open Access Journals (Sweden)

    Boris V Schmid

    Full Text Available BACKGROUND: A large trial to investigate the effectiveness of population based screening for chlamydia infections was conducted in the Netherlands in 2008-2012. The trial was register based and consisted of four rounds of screening of women and men in the age groups 16-29 years in three regions in the Netherlands. Data were collected on participation rates and positivity rates per round. A modeling study was conducted to project screening effects for various screening strategies into the future. METHODS AND FINDINGS: We used a stochastic network simulation model incorporating partnership formation and dissolution, aging and a sexual life course perspective. Trends in baseline rates of chlamydia testing and treatment were used to describe the epidemiological situation before the start of the screening program. Data on participation rates was used to describe screening uptake in rural and urban areas. Simulations were used to project the effectiveness of screening on chlamydia prevalence for a time period of 10 years. In addition, we tested alternative screening strategies, such as including only women, targeting different age groups, and biennial screening. Screening reduced prevalence by about 1% in the first two screening rounds and leveled off after that. Extrapolating observed participation rates into the future indicated very low participation in the long run. Alternative strategies only marginally changed the effectiveness of screening. Higher participation rates as originally foreseen in the program would have succeeded in reducing chlamydia prevalence to very low levels in the long run. CONCLUSIONS: Decreasing participation rates over time profoundly impact the effectiveness of population based screening for chlamydia infections. Using data from several consecutive rounds of screening in a simulation model enabled us to assess the future effectiveness of screening on prevalence. If participation rates cannot be kept at a sufficient level

  3. Geographical Detector-Based Identification of the Impact of Major Determinants on Aeolian Desertification Risk.

    Science.gov (United States)

    Du, Ziqiang; Xu, Xiaoming; Zhang, Hong; Wu, Zhitao; Liu, Yong

    2016-01-01

    Arid and semi-arid areas in North China are facing the challenge of a rising aeolian desertification risk (ADR) due to the intertwined effects of complex natural processes and intensified anthropogenic activities. An accurate quantitative assessment of the relationship between ADR and its determinants is beneficial for understanding the driving mechanisms of aeolian desertification and for controlling future desertification. Previous studies have failed to quantify the relative role of determinants driving ADR and have been limited in assessing their interactive impacts. In this study, a spatial variance analysis-based geographical detector methodology is used to quantify the effects of geological, physical, and human factors on the occurrence of ADR in an area characterized by mountains and hills in northern China. It is found that soil type, precipitation, and wind velocity are the major determinants of ADR, which implies that geological and physical elements (e.g., soil attribute) and climatic factors (e.g., precipitation and wind velocity) rather than human activities have played a greater role in the incidence of ADR. Particularly, the results show that the interaction of various determinants causes significant non-linearly enhanced impacts on the ADR. The findings of our study will assist local inhabitants and policy makers in developing measures for wind prevention and sand control to mitigate the effects of desertification in the region.

  4. Impact of Learning Model Based on Cognitive Conflict toward Student’s Conceptual Understanding

    Science.gov (United States)

    Mufit, F.; Festiyed, F.; Fauzan, A.; Lufri, L.

    2018-04-01

    The problems that often occur in the learning of physics is a matter of misconception and low understanding of the concept. Misconceptions do not only happen to students, but also happen to college students and teachers. The existing learning model has not had much impact on improving conceptual understanding and remedial efforts of student misconception. This study aims to see the impact of cognitive-based learning model in improving conceptual understanding and remediating student misconceptions. The research method used is Design / Develop Research. The product developed is a cognitive conflict-based learning model along with its components. This article reports on product design results, validity tests, and practicality test. The study resulted in the design of cognitive conflict-based learning model with 4 learning syntaxes, namely (1) preconception activation, (2) presentation of cognitive conflict, (3) discovery of concepts & equations, (4) Reflection. The results of validity tests by some experts on aspects of content, didactic, appearance or language, indicate very valid criteria. Product trial results also show a very practical product to use. Based on pretest and posttest results, cognitive conflict-based learning models have a good impact on improving conceptual understanding and remediating misconceptions, especially in high-ability students.

  5. Dealing with regional hydrologic data-base limitations. Case example: the Columbia River basalts

    International Nuclear Information System (INIS)

    Schalla, R.; Leonhart, L.S.

    1981-01-01

    Limitations are encountered in assembling hydrologic data for a broad geographic region, such as the Columbia Plateau in the northwestern US, into a conceptual model of the hydrologic system. These limitations may become resonant in subsequent numerical simulations of hydrologic system behavior. Included among such data limitations are irregular spatial distributions of data, decreases in information with increasing depth from the land surface, uncertainties about the reliability of reported hydrologic data, disparities in time-dependent parameters, and lack of field verification of data. The preparation of a regional hydrologic system description, therefore, first involves a comprehensive data evaluation, wherein the data are classified and ranked in terms of their utility to the study. The results of this evaluation are essential in planning future data acquisition activities, as well as in selecting and developing models. In turn, iterative use of modeling, data refinement, and data acquisition is considered to be highly effective. The case example of preparing a hydrologic system description for the Columbia Plateau, as required for repository siting, illustrates methods of determining the accuracy of certain data, compensating for data limitations, evaluating the need for acquiring additional data, and refining data through iterative techniques. Emphasis is placed on professional subjectivity, which has proven to be essential in data base evaluation and refinement

  6. Habitat selection and risk of predation: re-colonization by lynx had limited impact on habitat selection by roe deer.

    Directory of Open Access Journals (Sweden)

    Gustaf Samelius

    Full Text Available Risk of predation is an evolutionary force that affects behaviors of virtually all animals. In this study, we examined how habitat selection by roe deer was affected by risk of predation by Eurasian lynx - the main predator of roe deer in Scandinavia. Specifically, we compared how habitat selection by roe deer varied (1 before and after lynx re-established in the study area and (2 in relation to habitat-specific risk of predation by lynx. All analyses were conducted at the spatial and temporal scales of home ranges and seasons. We did not find any evidence that roe deer avoided habitats in which the risk of predation by lynx was greatest and information-theoretic model selection showed that re-colonization by lynx had limited impact on habitat selection by roe deer despite lynx predation causing 65% of known mortalities after lynx re-colonized the area. Instead we found that habitat selection decreased when habitat availability increased for 2 of 5 habitat types (a pattern referred to as functional response in habitat selection. Limited impact of re-colonization by lynx on habitat selection by roe deer in this study differs from elk in North America altering both daily and seasonal patterns in habitat selection at the spatial scales of habitat patches and home ranges when wolves were reintroduced to Yellowstone National Park. Our study thus provides further evidence of the complexity by which animals respond to risk of predation and suggest that it may vary between ecosystems and predator-prey constellations.

  7. Habitat selection and risk of predation: re-colonization by lynx had limited impact on habitat selection by roe deer.

    Science.gov (United States)

    Samelius, Gustaf; Andrén, Henrik; Kjellander, Petter; Liberg, Olof

    2013-01-01

    Risk of predation is an evolutionary force that affects behaviors of virtually all animals. In this study, we examined how habitat selection by roe deer was affected by risk of predation by Eurasian lynx - the main predator of roe deer in Scandinavia. Specifically, we compared how habitat selection by roe deer varied (1) before and after lynx re-established in the study area and (2) in relation to habitat-specific risk of predation by lynx. All analyses were conducted at the spatial and temporal scales of home ranges and seasons. We did not find any evidence that roe deer avoided habitats in which the risk of predation by lynx was greatest and information-theoretic model selection showed that re-colonization by lynx had limited impact on habitat selection by roe deer despite lynx predation causing 65% of known mortalities after lynx re-colonized the area. Instead we found that habitat selection decreased when habitat availability increased for 2 of 5 habitat types (a pattern referred to as functional response in habitat selection). Limited impact of re-colonization by lynx on habitat selection by roe deer in this study differs from elk in North America altering both daily and seasonal patterns in habitat selection at the spatial scales of habitat patches and home ranges when wolves were reintroduced to Yellowstone National Park. Our study thus provides further evidence of the complexity by which animals respond to risk of predation and suggest that it may vary between ecosystems and predator-prey constellations.

  8. Impacts of Base-Case and Post-Contingency Constraint Relaxations on Static and Dynamic Operational Security

    Science.gov (United States)

    Salloum, Ahmed

    Constraint relaxation by definition means that certain security, operational, or financial constraints are allowed to be violated in the energy market model for a predetermined penalty price. System operators utilize this mechanism in an effort to impose a price-cap on shadow prices throughout the market. In addition, constraint relaxations can serve as corrective approximations that help in reducing the occurrence of infeasible or extreme solutions in the day-ahead markets. This work aims to capture the impact constraint relaxations have on system operational security. Moreover, this analysis also provides a better understanding of the correlation between DC market models and AC real-time systems and analyzes how relaxations in market models propagate to real-time systems. This information can be used not only to assess the criticality of constraint relaxations, but also as a basis for determining penalty prices more accurately. Constraint relaxations practice was replicated in this work using a test case and a real-life large-scale system, while capturing both energy market aspects and AC real-time system performance. System performance investigation included static and dynamic security analysis for base-case and post-contingency operating conditions. PJM peak hour loads were dynamically modeled in order to capture delayed voltage recovery and sustained depressed voltage profiles as a result of reactive power deficiency caused by constraint relaxations. Moreover, impacts of constraint relaxations on operational system security were investigated when risk based penalty prices are used. Transmission lines in the PJM system were categorized according to their risk index and each category was as-signed a different penalty price accordingly in order to avoid real-time overloads on high risk lines. This work also extends the investigation of constraint relaxations to post-contingency relaxations, where emergency limits are allowed to be relaxed in energy market models

  9. Feeling is Believing: a location limited channel based on grip pattern biometrics and cryptanalysis

    NARCIS (Netherlands)

    Buhan, I.R.; Doumen, J.M.; Hartel, Pieter H.; Veldhuis, Raymond N.J.

    We use grip pattern based biometrics as a location limited channel to achieve pre-authentication in a protocol that sets up a secure cannel between two handheld devices. The protocol efficiently calculates a shared secret key from biometric data using quantization and cryptanalysis. The protocol is

  10. 76 FR 12645 - Ownership Limitations and Governance Requirements for Security-Based Swap Clearing Agencies...

    Science.gov (United States)

    2011-03-08

    ... 3235-AK74 Ownership Limitations and Governance Requirements for Security- Based Swap Clearing Agencies... the Dodd-Frank Act, the Commission shall adopt such rules if it determines that they are necessary or appropriate to improve the governance of, or to mitigate systemic risk, promote competition or mitigate...

  11. An Impulse Based Substructuring approach for impact analysis and load case simulations

    Science.gov (United States)

    Rixen, Daniel J.; van der Valk, Paul L. C.

    2013-12-01

    In the present paper we outline the basic theory of assembling substructures for which the dynamics are described as Impulse Response Functions. The assembly procedure computes the time response of a system by evaluating per substructure the convolution product between the Impulse Response Functions and the applied forces, including the interface forces that are computed to satisfy the interface compatibility. We call this approach the Impulse Based Substructuring method since it transposes to the time domain the Frequency Based Substructuring approach. In the Impulse Based Substructuring technique the Impulse Response Functions of the substructures can be gathered either from experimental tests using a hammer impact or from time-integration of numerical submodels. In this paper the implementation of the method is outlined for the case when the impulse responses of the substructures are computed numerically. A simple bar example is shown in order to illustrate the concept. The Impulse Based Substructuring allows fast evaluation of impact response of a structure when the impulse response of its components is known. It can thus be used to efficiently optimize designs of consumer products by including impact behavior at the early stage of the design, but also for performing substructured simulations of complex structures such as offshore wind turbines.

  12. Historical Chronology of ENSO Events Based Upon Documentary Data From South America: Strengths and Limitations

    Science.gov (United States)

    Luc, O.

    2007-05-01

    The first reconstructions of past El Niño occurrences were proposed by W. Quinn twenty years ago. They were based on documentary evidence of anomalous rainfall episodes, destructive floods and other possible impacts of El Niño conditions in Peru and other South-American countries. It has been shown, later, that the El Niño chronological sequence covering the last four and a half centuries produced by Quinn needed a thorough revision since many so-called EN events had not occurred while some others had been overlooked. Beside the classical methodological problems met in historical climatology studies (reliability of data, confidence in the sources, primary and secondary information), the reconstruction of former EN events faces specific difficulties dealing with the significance of the indicators and their spatial location. For instance, strong precipitation anomalies during summer in Southern Ecuador and northern Peru and precipitation excess recorded in the preceding winter in central Chile constitute quite reliable proxies of El Niño conditions, in modern times. However this observed teleconnection pattern, which is useful to reinforce the interpretation of past EN occurrences, seems to have been inoperative before the early nineteenth century. It is interpreted that atmospheric circulation features during the Little Ice Age interfered with the teleconnection system linking the EN impacts in northern Peru and central Chile. As a consequence, how should be evaluated the significance of documented winter precipitation excess in central Chile in years during which there is drought evidence in northern Peru, during the sixteenth to eighteenth century? And vice versa, are former evidences for precipitation excess in northern Peru (prior to the nineteenth century) quite reliable indicators for EN conditions, even if the preceding winter was dry in the Valparaiso-Santiago region? Other specific problems met in the building-up of a consolidated EN chronological

  13. Transport properties of triarylamine based dendrimers studied by space charge limited current transients

    Science.gov (United States)

    Szymanski, Marek Z.; Kulszewicz-Bajer, Irena; Faure-Vincent, Jérôme; Djurado, David

    2012-08-01

    We have studied hole transport in triarylamine based dendrimer using space-charge-limited current transient technique. A mobility of 8 × 10-6 cm2/(V s) and a characteristic detrapping time of about 100 ms have been obtained. We found that quasi-ohmic contact is formed with gold. The obtained mobility differs from the apparent one given by the analysis of stationary current-voltage characteristics because of a limited contact efficiency. The comparison between transients obtained from fresh and aged samples reveals no change in mobility with aging. The deterioration of electrical properties is exclusively caused by trap formation and accumulation of ionic conducting impurities. Finally, repeated transient measurements have been applied to analyze the dynamics of charge trapping process.

  14. Capacity Prediction Model Based on Limited Priority Gap-Acceptance Theory at Multilane Roundabouts

    Directory of Open Access Journals (Sweden)

    Zhaowei Qu

    2014-01-01

    Full Text Available Capacity is an important design parameter for roundabouts, and it is the premise of computing their delay and queue. Roundabout capacity has been studied for decades, and empirical regression model and gap-acceptance model are the two main methods to predict it. Based on gap-acceptance theory, by considering the effect of limited priority, especially the relationship between limited priority factor and critical gap, a modified model was built to predict the roundabout capacity. We then compare the results between Raff’s method and maximum likelihood estimation (MLE method, and the MLE method was used to predict the critical gaps. Finally, the predicted capacities from different models were compared, with the observed capacity by field surveys, which verifies the performance of the proposed model.

  15. Video-coaching as biofeedback tool to improve gated treatments. Possibilities and limitations

    Energy Technology Data Exchange (ETDEWEB)

    Cossmann, Peter H. [Medtech Consulting Cossmann, Wettingen (Switzerland); Private Univ. im Fuerstentum Liechtenstein, Triesen (Liechtenstein)

    2012-11-01

    For respiratory gated radiotherapy the manufacturers of linear accelerators offer dedicated gating technologies. The video-based Varian RPM Gating system (Varian Medical Systems, Palo Alto/CA, USA) includes in a standard configuration a support tool for regular breathing called audiocoaching. As this approach has limitations regarding direct control of the patient's breathing due to a missing feedback, we designed an additional tool offering videocoaching. In order to evaluate the impact of this additional functionality, we measured parameters defining the image quality of 4D-CT data as well as the treatment duration which is mainly influenced by the patient's limited ability to achieve a stable breathing pattern. (orig.)

  16. Impact Coefficient Analysis of Long-Span Railway Cable-Stayed Bridge Based on Coupled Vehicle-Bridge Vibration

    Directory of Open Access Journals (Sweden)

    Yongle Li

    2015-01-01

    Full Text Available Compared with medium and small span bridges, very limited attention has been paid on the research of the impact coefficient of long-span railway bridges. To estimate the impact effects of long-span railway bridges subjected to moving vehicles, a real long-span railway cable-stayed bridge is regarded as the research object in this study, and a coupled model of vehicle-bridge system is established. The track irregularities are taken as the system excitation and the dynamic responses of the vehicle-bridge system are calculated. The impact effects on main girder, stayed cable, bearings, and bridge tower are discussed at various vehicle speeds. The results show that different components of the long-span railway cable-stayed bridge have different impact coefficients. Even for each part, the impact coefficient is also different at different local positions. It reveals that the impact coefficients in the actual situation may have significant differences with the related code clauses in the present design codes.

  17. Challenges in implementing a Planetary Boundaries based Life-Cycle Impact Assessment methodology

    DEFF Research Database (Denmark)

    Ryberg, Morten; Owsianiak, Mikolaj; Richardson, Katherine

    2016-01-01

    of resolving the challenges and developing such methodology is discussed. The challenges are related to technical issues, i.e., modelling and including the Earth System processes and their control variables as impact categories in Life-Cycle Impact Assessment and to theoretical considerations with respect...... to the interpretation and use of Life-Cycle Assessment results in accordance with the Planetary Boundary framework. The identified challenges require additional research before a Planetary Boundaries based Life-Cycle Impact Assessment method can be developed. Research on modelling the impacts on Earth System processes......Impacts on the environment from human activities are now threatening to exceed thresholds for central Earth System processes, potentially moving the Earth System out of the Holocene state. To avoid such consequences, the concept of Planetary Boundaries was defined in 2009, and updated in 2015...

  18. Selecting representative climate models for climate change impact studies : An advanced envelope-based selection approach

    NARCIS (Netherlands)

    Lutz, Arthur F.; ter Maat, Herbert W.; Biemans, Hester; Shrestha, Arun B.; Wester, Philippus; Immerzeel, Walter W.|info:eu-repo/dai/nl/290472113

    2016-01-01

    Climate change impact studies depend on projections of future climate provided by climate models. The number of climate models is large and increasing, yet limitations in computational capacity make it necessary to compromise the number of climate models that can be included in a climate change

  19. Selecting representative climate models for climate change impact studies: an advanced envelope-based selection approach

    NARCIS (Netherlands)

    Lutz, Arthur F.; Maat, ter Herbert W.; Biemans, Hester; Shrestha, Arun B.; Wester, Philippus; Immerzeel, Walter W.

    2016-01-01

    Climate change impact studies depend on projections of future climate provided by climate models. The number of climate models is large and increasing, yet limitations in computational capacity make it necessary to compromise the number of climate models that can be included in a climate change

  20. Evaluating the impact of implementation factors on family-based prevention programming: methods for strengthening causal inference.

    Science.gov (United States)

    Crowley, D Max; Coffman, Donna L; Feinberg, Mark E; Greenberg, Mark T; Spoth, Richard L

    2014-04-01

    Despite growing recognition of the important role implementation plays in successful prevention efforts, relatively little work has sought to demonstrate a causal relationship between implementation factors and participant outcomes. In turn, failure to explore the implementation-to-outcome link limits our understanding of the mechanisms essential to successful programming. This gap is partially due to the inability of current methodological procedures within prevention science to account for the multitude of confounders responsible for variation in implementation factors (i.e., selection bias). The current paper illustrates how propensity and marginal structural models can be used to improve causal inferences involving implementation factors not easily randomized (e.g., participant attendance). We first present analytic steps for simultaneously evaluating the impact of multiple implementation factors on prevention program outcome. Then, we demonstrate this approach for evaluating the impact of enrollment and attendance in a family program, over and above the impact of a school-based program, within PROSPER, a large-scale real-world prevention trial. Findings illustrate the capacity of this approach to successfully account for confounders that influence enrollment and attendance, thereby more accurately representing true causal relations. For instance, after accounting for selection bias, we observed a 5% reduction in the prevalence of 11th grade underage drinking for those who chose to receive a family program and school program compared to those who received only the school program. Further, we detected a 7% reduction in underage drinking for those with high attendance in the family program.

  1. Systematic review of current efforts to quantify the impacts of climate change on undernutrition.

    Science.gov (United States)

    Phalkey, Revati K; Aranda-Jan, Clara; Marx, Sabrina; Höfle, Bernhard; Sauerborn, Rainer

    2015-08-18

    Malnutrition is a challenge to the health and productivity of populations and is viewed as one of the five largest adverse health impacts of climate change. Nonetheless, systematic evidence quantifying these impacts is currently limited. Our aim was to assess the scientific evidence base for the impact of climate change on childhood undernutrition (particularly stunting) in subsistence farmers in low- and middle-income countries. A systematic review was conducted to identify peer-reviewed and gray full-text documents in English with no limits for year of publication or study design. Fifteen manuscripts were reviewed. Few studies use primary data to investigate the proportion of stunting that can be attributed to climate/weather variability. Although scattered and limited, current evidence suggests a significant but variable link between weather variables, e.g., rainfall, extreme weather events (floods/droughts), seasonality, and temperature, and childhood stunting at the household level (12 of 15 studies, 80%). In addition, we note that agricultural, socioeconomic, and demographic factors at the household and individual levels also play substantial roles in mediating the nutritional impacts. Comparable interdisciplinary studies based on primary data at a household level are urgently required to guide effective adaptation, particularly for rural subsistence farmers. Systemization of data collection at the global level is indispensable and urgent. We need to assimilate data from long-term, high-quality agricultural, environmental, socioeconomic, health, and demographic surveillance systems and develop robust statistical methods to establish and validate causal links, quantify impacts, and make reliable predictions that can guide evidence-based health interventions in the future.

  2. Fault tolerant control with torque limitation based on fault mode for ten-phase permanent magnet synchronous motor

    Directory of Open Access Journals (Sweden)

    Guo Hong

    2015-10-01

    Full Text Available This paper proposes a novel fault tolerant control with torque limitation based on the fault mode for the ten-phase permanent magnet synchronous motor (PMSM under various open-circuit and short-circuit fault conditions, which includes the optimal torque control and the torque limitation control based on the fault mode. The optimal torque control is adopted to guarantee the ripple-free electromagnetic torque operation for the ten-phase motor system under the post-fault condition. Furthermore, we systematically analyze the load capacity of the ten-phase motor system under different fault modes. And a torque limitation control approach based on the fault mode is proposed, which was not available earlier. This approach is able to ensure the safety operation of the faulted motor system in long operating time without causing the overheat fault. The simulation result confirms that the proposed fault tolerant control for the ten-phase motor system is able to guarantee the ripple-free electromagnetic torque and the safety operation in long operating time under the normal and fault conditions.

  3. Risk impact of BWR technical specifications requirements during shutdown

    International Nuclear Information System (INIS)

    Staple, B.D.; Kirk, H.K.; Yakle, J.

    1994-10-01

    This report presents an application of probabilistic models and risk based criteria for determining the risk impact of the Limiting Conditions of Operations (LCOs) in the Technical Specifications (TSs) of a boiling water reactor during shutdown. This analysis studied the risk impact of the current requirements of Allowed Outage Times (AOTs) and Surveillance Test Intervals (STIs) in eight Plant Operational States (POSs) which encompass power operations, shutdown, and refueling. This report also discusses insights concerning TS action statements

  4. Assessment of impact factors on shear wave based liver stiffness measurement

    Energy Technology Data Exchange (ETDEWEB)

    Ling, Wenwu, E-mail: lingwenwubing@163.com [Department of Ultrasound, West China Hospital of Sichuan University, Chengdu 610041 (China); Lu, Qiang, E-mail: wsluqiang@126.com [Department of Ultrasound, West China Hospital of Sichuan University, Chengdu 610041 (China); Quan, Jierong, E-mail: quanjierong@163.com [Department of Ultrasound, West China Hospital of Sichuan University, Chengdu 610041 (China); Ma, Lin, E-mail: malin2010US@163.com [Department of Ultrasound, West China Hospital of Sichuan University, Chengdu 610041 (China); Luo, Yan, E-mail: huaxiluoyan@gmail.com [Department of Ultrasound, West China Hospital of Sichuan University, Chengdu 610041 (China)

    2013-02-15

    Shear wave based ultrasound elastographies have been implemented as non-invasive methods for quantitative assessment of liver stiffness. Nonetheless, there are only a few studies that have investigated impact factors on liver stiffness measurement (LSM). Moreover, standard examination protocols for LSM are still lacking in clinical practice. Our study aimed to assess the impact factors on LSM to establish its standard examination protocols in clinical practice. We applied shear wave based elastography point quantification (ElastPQ) in 21 healthy individuals to determine the impact of liver location (segments I–VIII), breathing phase (end-inspiration and end-expiration), probe position (sub-costal and inter-costal position) and examiner on LSM. Additional studies in 175 healthy individuals were also performed to determine the influence of gender and age on liver stiffness. We found significant impact of liver location on LSM, while the liver segment V displayed the lowest coefficient of variation (CV 21%). The liver stiffness at the end-expiration was significantly higher than that at the end-inspiration (P = 2.1E−05). The liver stiffness was 8% higher in men than in women (3.8 ± 0.7 kPa vs. 3.5 ± 0.4 kPa, P = 0.0168). In contrast, the liver stiffness was comparable in the different probe positions, examiners and age groups (P > 0.05). In conclusion, this study reveals significant impact from liver location, breathing phase and gender on LSM, while furthermore strengthening the necessity for the development of standard examination protocols on LSM.

  5. Practical management of cumulative anthropogenic impacts with working marine examples.

    Science.gov (United States)

    Wright, Andrew J; Kyhn, Line A

    2015-04-01

    Human pressure on the environment is expanding and intensifying, especially in coastal and offshore areas. Major contributors to this are the current push for offshore renewable energy sources, which are thought of as environmentally friendly sources of power, as well as the continued demand for petroleum. Human disturbances, including the noise almost ubiquitously associated with human activity, are likely to increase the incidence, magnitude, and duration of adverse effects on marine life, including stress responses. Stress responses have the potential to induce fitness consequences for individuals, which add to more obvious directed takes (e.g., hunting or fishing) to increase the overall population-level impact. To meet the requirements of marine spatial planning and ecosystem-based management, many efforts are ongoing to quantify the cumulative impacts of all human actions on marine species or populations. Meanwhile, regulators face the challenge of managing these accumulating and interacting impacts with limited scientific guidance. We believe there is scientific support for capping the level of impact for (at a minimum) populations in decline or with unknown statuses. This cap on impact can be facilitated through implementation of regular application cycles for project authorization or improved programmatic and aggregated impact assessments that simultaneously consider multiple projects. Cross-company collaborations and a better incorporation of uncertainty into decision making could also help limit, if not reduce, cumulative impacts of multiple human activities. These simple management steps may also form the basis of a rudimentary form of marine spatial planning and could be used in support of future ecosystem-based management efforts. © 2014 Society for Conservation Biology.

  6. Environmental Impacts of Plant-Based Diets: How Does Organic Food Consumption Contribute to Environmental Sustainability?

    Science.gov (United States)

    Lacour, Camille; Seconda, Louise; Allès, Benjamin; Hercberg, Serge; Langevin, Brigitte; Pointereau, Philippe; Lairon, Denis; Baudry, Julia; Kesse-Guyot, Emmanuelle

    2018-01-01

    Studies investigating diet-related environmental impacts have rarely considered the production method of the foods consumed. The objective of the present study, based on the NutriNet-Santé cohort, was to investigate the relationship between a provegetarian score and diet-related environmental impacts. We also evaluated potential effect modifications on the association between a provegetarian score and the environmental impacts of organic food consumption. Food intake and organic food consumption ratios were obtained from 34,442 French adults using a food frequency questionnaire, which included information on organic food consumption for each group. To characterize the overall structure of the diets, a provegetarian score was used to identify preferences for plant-based products as opposed to animal-based products. Moreover, three environmental indicators were used to assess diet-related environmental impacts: greenhouse gas (GHG) emissions, cumulative energy demand (CED), and land occupation. Environmental impacts were assessed using production life cycle assessment (LCA) at the farm level. Associations between provegetarian score quintiles, the level of organic food consumption, and environmental indicators were analyzed using ANCOVAs adjusted for energy, sex, and age. Participants with diets rich in plant-based foods (fifth quintile) were more likely to be older urban dwellers, to hold a higher degree in education, and to be characterized by an overall healthier lifestyle and diet. A higher provegetarian score was associated with lower environmental impacts (GHG emissions Q5vsQ1  = 838/1,664 kg CO 2eq /year, -49.6%, P  impacts but only among participants with diets rich in plant-based products. Future field studies should endeavor to integrate all the components of a sustainable diet, i.e., both diet composition and production methods.

  7. Social impact bonds and their application to preventive health.

    Science.gov (United States)

    Fitzgerald, John L

    2013-05-01

    Although preventive health in Australia has been acknowledged as central to national health and wellbeing, efforts to reform the delivery of preventive health have to date produced limited results. The financing of preventive health at a national level is based on outcome- or performance-based funding mechanisms; however, delivery of interventions and activities at a state level have not been subjected to outcome-based funding processes. A new financing tool being applied in the area of social services (social impact bonds) has emerged as a possible model for application in the prevention arena. This paper explores key issues in the consideration of this funding model in the prevention arena. When preventive health is conceptualised as a merit good, the role of government is clarified and outcome measures fully articulated, social impact bonds may be a viable funding option to supplement core public health activities. WHAT IS KNOWN ABOUT THE TOPIC? The complexities of outcome monitoring in preventive health are well understood.Likewise, the problem of linking funding to outcomes from preventive health practice has also been debated at length in health policy. However, not much is known about the application of social impact bonds into the preventive health arena.WHAT DOES THIS PAPER ADD? This paper discusses the limitations and opportunities facing the application of the social impact bond financing model in the preventive health arena. This has not been undertaken previously.WHAT ARE THE IMPLICATIONS FOR PRACTITIONERS? Social impact bonds have received significant recent attention from federal and state government treasury departments as potential financing tools for government. Health policy practitioners are watching this space very closely to see the outcomes of a New South Wales trial. Health promotion practitioners and primary care practitioners who deliver preventive services will need to keep abreast of this issue as it will have significant impact on their

  8. Impacts of Voltage Control Methods on Distribution Circuit’s Photovoltaic (PV Integration Limits

    Directory of Open Access Journals (Sweden)

    Anamika Dubey

    2017-10-01

    Full Text Available The widespread integration of photovoltaic (PV units may result in a number of operational issues for the utility distribution system. The advances in smart-grid technologies with better communication and control capabilities may help to mitigate these challenges. The objective of this paper is to evaluate multiple voltage control methods and compare their effectiveness in mitigating the impacts of high levels of PV penetrations on distribution system voltages. A Monte Carlo based stochastic analysis framework is used to evaluate the impacts of PV integration, with and without voltage control. Both snapshot power flow and time-series analysis are conducted for the feeder with varying levels of PV penetrations. The methods are compared for their impacts on (1 the feeder’s PV hosting capacity; (2 the number of voltage violations and the magnitude of the largest bus voltage; (3 the net reactive power demand from the substation; and (4 the number of switching operations of feeder’s legacy voltage support devices i.e., capacitor banks and load tap changers (LTCs. The simulation results show that voltage control help in mitigating overvoltage concerns and increasing the feeder’s hosting capacity. Although, the legacy control solves the voltage concerns for primary feeders, a smart inverter control is required to mitigate both primary and secondary feeder voltage regulation issues. The smart inverter control, however, increases the feeder’s reactive power demand and the number of LTC and capacitor switching operations. For the 34.5-kV test circuit, it is observed that the reactive power demand increases from 0 to 6.8 MVAR on enabling Volt-VAR control for PV inverters. The total number of capacitor and LTC operations over a 1-year period also increases from 455 operations to 1991 operations with Volt-VAR control mode. It is also demonstrated that by simply changing the control mode of capacitor banks, a significant reduction in the unnecessary

  9. Quantitative health impact assessment of transport policies: two simulations related to speed limit reduction and traffic re-allocation in the Netherlands.

    Science.gov (United States)

    Schram-Bijkerk, D; van Kempen, E; Knol, A B; Kruize, H; Staatsen, B; van Kamp, I

    2009-10-01

    Few quantitative health impact assessments (HIAs) of transport policies have been published so far and there is a lack of a common methodology for such assessments. To evaluate the usability of existing HIA methodology to quantify health effects of transport policies at the local level. Health impact of two simulated but realistic transport interventions - speed limit reduction and traffic re-allocation - was quantified by selecting traffic-related exposures and health endpoints, modelling of population exposure, selecting exposure-effect relations and estimating the number of local traffic-related cases and disease burden, expressed in disability-adjusted life-years (DALYs), before and after the intervention. Exposure information was difficult to retrieve because of the local scale of the interventions, and exposure-effect relations for subgroups and combined effects were missing. Given uncertainty in the outcomes originating from this kind of missing information, simulated changes in population health by two local traffic interventions were estimated to be small (<5%), except for the estimated reduction in DALYs by less traffic accidents (60%) due to speed limit reduction. Quantitative HIA of transport policies at a local scale is possible, provided that data on exposures, the exposed population and their baseline health status are available. The interpretation of the HIA information should be carried out in the context of the quality of input data and assumptions and uncertainties of the analysis.

  10. Placement of effective work-in-progress limits in route-specific unit-based pull systems

    NARCIS (Netherlands)

    Ziengs, N.; Riezebos, J.; Germs, R.

    2012-01-01

    Unit-based pull systems control the throughput time of orders in a production system by limiting the number of orders on the shop floor. In production systems where orders can follow different routings on the shop floor, route-specific pull systems that control the progress of orders on the shop

  11. Processing and impact properties of steel based laminated composites

    International Nuclear Information System (INIS)

    Carreno, F.; Pozuelo, M.; Chao, J.; Ruano, O. A.

    2001-01-01

    A seven layers steel based laminated composite (four ultra-high carbon steel, UHCS, layers and three mild steel, MS layers) has been processed by rolling bonding and its microstructure and impact properties have been studied. Suitable parameters of temperature and thickness reduction were selected to obtain a finer microstructure relative to the original materials components. This finer microstructure induces improved mechanical properties. Charpy impact tests values in both crack arrester and crack divider orientations improve the values of the UHCS constituent materials. Furthermore, the crack arrester orientation value exceed that of the MS material. The delamination, which is controlled by interface bonding, plays a key role defecting the crack, absorbing energy and imposing the nucleation of new cracks in the next materials layers. (Author) 10 refs

  12. Urban base flow with low impact development

    Science.gov (United States)

    Bhaskar, Aditi; Hogan, Dianna M.; Archfield, Stacey A.

    2016-01-01

    A novel form of urbanization, low impact development (LID), aims to engineer systems that replicate natural hydrologic functioning, in part by infiltrating stormwater close to the impervious surfaces that generate it. We sought to statistically evaluate changes in a base flow regime because of urbanization with LID, specifically changes in base flow magnitude, seasonality, and rate of change. We used a case study watershed in Clarksburg, Maryland, in which streamflow was monitored during whole-watershed urbanization from forest and agricultural to suburban residential development using LID. The 1.11-km2 watershed contains 73 infiltration-focused stormwater facilities, including bioretention facilities, dry wells, and dry swales. We examined annual and monthly flow during and after urbanization (2004–2014) and compared alterations to nearby forested and urban control watersheds. We show that total streamflow and base flow increased in the LID watershed during urbanization as compared with control watersheds. The LID watershed had more gradual storm recessions after urbanization and attenuated seasonality in base flow. These flow regime changes may be because of a reduction in evapotranspiration because of the overall decrease in vegetative cover with urbanization and the increase in point sources of recharge. Precipitation that may once have infiltrated soil, been stored in soil moisture to be eventually transpired in a forested landscape, may now be recharged and become base flow. The transfer of evapotranspiration to base flow is an unintended consequence to the water balance of LID.

  13. Scale issues in the assessment of ecological impacts using a GIS-based habitat model - A case study for the Stockholm region

    International Nuclear Information System (INIS)

    Gontier, Mikael

    2007-01-01

    Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) provide two interlinked platforms for the assessment of impacts on biodiversity caused by human developments. Although it might be too early to draw conclusions on the efficiency of SEA to assess such impacts, a number of persistent problems have been identified in the case of EIA. Some of these shortcomings concern the lack of proper prediction and impact quantification, and the inadequate/insufficient assessment of cumulative effects. A number of problems are related to the scale(s) at which the assessment is performed. SEA may provide a more adequate framework than EIA to discuss scale-related issues (i.e. cumulative impacts) but it also requires the use of adapted tools. This paper presents a case study where a GIS-based habitat model for the lesser spotted woodpecker is tested, validated and applied to a planning scenario in the Stockholm region in Sweden. The results show that the method adopted offers great prospects to contribute to a better assessment of biodiversity-related impacts. Even though some limitations remain in the form of data requirement and interpretation of the results, the model produced continuous, quantified predictions over the study area and provided a relevant basis for the assessment of cumulative effects. Furthermore, this paper discusses potential conflicts between different scales involved in the assessment - related to administrative boundaries, ecological processes, data availability, the method adopted to perform the assessment and temporal aspects

  14. Climate Impact of a Regional Nuclear Weapons Exchange: An Improved Assessment Based On Detailed Source Calculations

    Science.gov (United States)

    Reisner, Jon; D'Angelo, Gennaro; Koo, Eunmo; Even, Wesley; Hecht, Matthew; Hunke, Elizabeth; Comeau, Darin; Bos, Randall; Cooley, James

    2018-03-01

    We present a multiscale study examining the impact of a regional exchange of nuclear weapons on global climate. Our models investigate multiple phases of the effects of nuclear weapons usage, including growth and rise of the nuclear fireball, ignition and spread of the induced firestorm, and comprehensive Earth system modeling of the oceans, land, ice, and atmosphere. This study follows from the scenario originally envisioned by Robock, Oman, Stenchikov, et al. (2007, https://doi.org/10.5194/acp-7-2003-2007), based on the analysis of Toon et al. (2007, https://doi.org/10.5194/acp-7-1973-2007), which assumes a regional exchange between India and Pakistan of fifty 15 kt weapons detonated by each side. We expand this scenario by modeling the processes that lead to production of black carbon, in order to refine the black carbon forcing estimates of these previous studies. When the Earth system model is initiated with 5 × 109 kg of black carbon in the upper troposphere (approximately from 9 to 13 km), the impact on climate variables such as global temperature and precipitation in our simulations is similar to that predicted by previously published work. However, while our thorough simulations of the firestorm produce about 3.7 × 109 kg of black carbon, we find that the vast majority of the black carbon never reaches an altitude above weather systems (approximately 12 km). Therefore, our Earth system model simulations conducted with model-informed atmospheric distributions of black carbon produce significantly lower global climatic impacts than assessed in prior studies, as the carbon at lower altitudes is more quickly removed from the atmosphere. In addition, our model ensembles indicate that statistically significant effects on global surface temperatures are limited to the first 5 years and are much smaller in magnitude than those shown in earlier works. None of the simulations produced a nuclear winter effect. We find that the effects on global surface temperatures

  15. Analysis of impacting phenomena in a helically wound heat exchanger

    International Nuclear Information System (INIS)

    Whiston, G.S.; Jordan, R.W.

    1986-01-01

    During commissioning tests on a helically wound heat exchanger at Heysham Nuclear Power Station, evidence of impacting was observed on accelerometer responses. Impacting greatly enhances wear and methods have been developed to determine whether the operating lifetime of plant may be limited by tube failures. A theoretical frequency response function based on Timoshenko beam theory has been derived which relates an impact force to the acceleration field which propagates away from the impact site and is detected by remote accelerometers. The accuracy of this function has been verified experimentally and its suitability for the analysis of boiler responses has been demonstrated following investigations into the nature of impacting. Examples of the analysis of impact forces are given and methods of estimating wear are discussed. (author)

  16. A detrimental soil disturbance prediction model for ground-based timber harvesting

    Science.gov (United States)

    Derrick A. Reeves; Matthew C. Reeves; Ann M. Abbott; Deborah S. Page-Dumroese; Mark D. Coleman

    2012-01-01

    Soil properties and forest productivity can be affected during ground-based harvest operations and site preparation. The degree of impact varies widely depending on topographic features and soil properties. Forest managers who understand site-specific limits to ground-based harvesting can alter harvest method or season to limit soil disturbance. To determine the...

  17. Landscape genetics and limiting factors

    Science.gov (United States)

    Samuel A. Cushman; Andrew J. Shirk; Erin L. Landguth

    2013-01-01

    Population connectivity is mediated by the movement of organisms or propagules through landscapes. However, little is known about how variation in the pattern of landscape mosaics affects the detectability of landscape genetic relationships. The goal of this paper is to explore the impacts of limiting factors on landscape genetic processes using simulation...

  18. Analysis of semen parameters in male referrals: impact of reference limits, stratification by fertility categories, predictors of change, and comparison of normal semen parameters in subfertile couples.

    Science.gov (United States)

    Baker, Karen; Li, Jianbo; Sabanegh, Edmund

    2015-01-01

    To [1] determine the impact of semen reference limits on referrals for male fertility evaluations, [2] analyze the stratification of subjects based on published "normal" thresholds, [3] analyze the odds of changing fertility categories during serial tests and thereby the potential impact of inherent variability of semen parameters on referrals, and [4] determine variable(s) predictive of change. Retrospective chart review. Academic referral center for male fertility. New encounters in a male fertility clinic over a 5-year period that straddles the publication of World Health Organization (WHO) 2010 reference values. None. Demographic and clinical variables, semen values, and fertility categories as follows: BE (below WHO 2010 criteria), BTWN (above WHO 2010 but below WHO 1999 criteria), and N (above WHO 1999 criteria). A total of 82.3% of initial semen tests were categorized as BE, and the predominance of this category was unchanged by publication of the WHO 2010 criteria. Men with initial semen analysis categorized as BTWN or N represented 16.2% and 1.5% of the referral population, respectively. Subjects initially categorized as BTWN were more likely to change fertility categories, and overwhelmingly this migration was downward. Analysis of normal individual semen parameters revealed statistically worse mean concentration and motility when at least one other parameter fell below the WHO 2010 criteria. Men with semen results above reference criteria are underrepresented, indicating that reference limits influence referral patterns for male fertility evaluations. Normal mean concentration and motility were lower in men with at least one other individual semen parameter below the 2010 criteria, suggesting global dysfunction in spermatogenesis. Published by Elsevier Inc.

  19. The impact of a future H2-based road transportation sector on the composition and chemistry of the atmosphere - Part 2: Stratospheric ozone

    Science.gov (United States)

    Wang, D.; Jia, W.; Olsen, S. C.; Wuebbles, D. J.; Dubey, M. K.; Rockett, A. A.

    2012-08-01

    The prospective future adoption of hydrogen to power the road transportation sector could greatly improve tropospheric air quality but also raises the question whether the adoption would have adverse effects on stratospheric ozone. The possibility of these undesirable impacts must be fully evaluated to guide future policy decisions. Here we evaluate the possible impact of a future (2050) H2-based road transportation sector on stratospheric composition and chemistry, especially on stratospheric ozone, with the MOZART chemical transport model. Since future growth is highly uncertain we evaluate the impact for two world evolution scenarios, one based on a high emitting scenario (IPCC A1FI) and the other on a low emitting scenario (IPCC B1), as well as two technological options: H2 fuel cells and H2 internal combustion engines. We assume a H2 leakage rate of 2.5% and a complete market penetration of H2 vehicles in 2050. The model simulations show that a H2-based road transportation sector would reduce stratospheric ozone concentrations as a result of perturbed catalytic ozone destruction cycles. The magnitude of the impact depends on which growth scenario the world evolves and which H2 technology option is applied. For the same world evolution scenario, stratospheric ozone decreases more in the H2 fuel cell scenarios than in the H2 internal combustion engine scenarios because of the NOx emissions in the latter case. If the same technological option is applied, the impact is larger in the A1FI emission scenario. The largest impact, a 0.54% decrease in annual average global mean stratospheric column ozone, is found with a H2 fuel cell type road transportation sector in the A1FI scenario; whereas the smallest impact, a 0.04% increase in stratospheric ozone, is found with applications of H2 internal combustion engine vehicles in the B1 scenario. The impacts of the other two scenarios fall between the above two bounding scenarios. However, the magnitude of these changes is

  20. The Impacts of Theme-Based Language Instruction: A Case Study of an Advanced Chinese Intensive Program

    Directory of Open Access Journals (Sweden)

    Song Jiang

    2017-06-01

    Full Text Available Theme-based language teaching under Content-Based Instruction (CBI is a pedagogical approach that emphasizes learning professional content along with language skills. This paper reports a case study on the impacts of a theme-based advanced Chinese intensive program in a university setting. It begins with a review of CBI and its theme-based approach and then discusses the program design, curriculum development, and instructional practice of the program. The impacts of the theme-based approach are examined based on the pre- and post-proficiency test results, learners’ self-reported surveys on the themes and topics, and the reading strategies covered in the program. Qualitative analysis of learners’ self-reflections and program evaluations is also presented. Based on the evidence collected, this paper argues that the theme-based model has positive impacts on improving language proficiency, preparing for academic and professional language use, cultivating strategic language learners, and revitalizing Chinese teaching at the superior level.

  1. Prediction method for cavitation erosion based on measurement of bubble collapse impact loads

    International Nuclear Information System (INIS)

    Hattori, S; Hirose, T; Sugiyama, K

    2009-01-01

    The prediction of cavitation erosion rates is important in order to evaluate the exact life of components. The measurement of impact loads in bubble collapses helps to predict the life under cavitation erosion. In this study, we carried out erosion tests and the measurements of impact loads in bubble collapses with a vibratory apparatus. We evaluated the incubation period based on a cumulative damage rule by measuring the impact loads of cavitation acting on the specimen surface and by using the 'constant impact load - number of impact loads curve' similar to the modified Miner's rule which is employed for fatigue life prediction. We found that the parameter Σ(F i α xn i ) (F i : impact load, n i : number of impacts and α: constant) is suitable for the evaluation of the erosion life. Moreover, we propose a new method that can predict the incubation period under various cavitation conditions.

  2. Developing drought impact functions for drought risk management

    Directory of Open Access Journals (Sweden)

    S. Bachmair

    2017-11-01

    leave-one-out cross validation. For count data the random forest outperformed the hurdle model. The between-model differences occurred for total drought impacts and for two subsets of impact categories (water supply and freshwater ecosystem impacts. In addition, different ways of defining the impact counts were investigated and were found to have little influence on the prediction skill. For all models we found a positive effect of including impact information of the preceding month as a predictor in addition to the hydrometeorological indicators. We conclude that, although having some limitations, text-based reports on drought impacts can provide useful information for drought risk management, and our study showcases different methodological approaches to developing drought impact functions based on text-based data.

  3. Questions concerning the potential impact of glyphosate-based herbicides on amphibians.

    Science.gov (United States)

    Wagner, Norman; Reichenbecher, Wolfram; Teichmann, Hanka; Tappeser, Beatrix; Lötters, Stefan

    2013-08-01

    Use of glyphosate-based herbicides is increasing worldwide. The authors review the available data related to potential impacts of these herbicides on amphibians and conduct a qualitative meta-analysis. Because little is known about environmental concentrations of glyphosate in amphibian habitats and virtually nothing is known about environmental concentrations of the substances added to the herbicide formulations that mainly contribute to adverse effects, glyphosate levels can only be seen as approximations for contamination with glyphosate-based herbicides. The impact on amphibians depends on the herbicide formulation, with different sensitivity of taxa and life stages. Effects on development of larvae apparently are the most sensitive endpoints to study. As with other contaminants, costressors mainly increase adverse effects. If and how glyphosate-based herbicides and other pesticides contribute to amphibian decline is not answerable yet due to missing data on how natural populations are affected. Amphibian risk assessment can only be conducted case-specifically, with consideration of the particular herbicide formulation. The authors recommend better monitoring of both amphibian populations and contamination of habitats with glyphosate-based herbicides, not just glyphosate, and suggest including amphibians in standardized test batteries to study at least dermal administration. Copyright © 2013 SETAC.

  4. Interference Alignment-based Precoding and User Selection with Limited Feedback in Two-cell Downlink Multi-user MIMO Systems

    Directory of Open Access Journals (Sweden)

    Yin Zhu

    2016-05-01

    Full Text Available Interference alignment (IA is a new approach to address interference in modern multiple-input multiple-out (MIMO cellular networks in which interference is an important factor that limits the system throughput. System throughput in most IA implementation schemes is significantly improved only with perfect channel state information and in a high signal-to-noise ratio (SNR region. Designing a simple IA scheme for the system with limited feedback and investigating system performance at a low-to-medium SNR region is important and practical. This paper proposed a precoding and user selection scheme based on partial interference alignment in two-cell downlink multi-user MIMO systems under limited feedback. This scheme aligned inter-cell interference to a predefined direction by designing user’s receive antenna combining vectors. A modified singular value decomposition (SVD-based beamforming method and a corresponding user-selection algorithm were proposed for the system with low rate limited feedback to improve sum rate performance. Simulation results show that the proposed scheme achieves a higher sum rate than traditional schemes without IA. The modified SVD-based beamforming scheme is also superior to the traditional zero-forcing beamforming scheme in low-rate limited feedback systems. The proposed partial IA scheme does not need to collaborate between transmitters and joint design between the transmitter and the users. The scheme can be implemented with low feedback overhead in current MIMO cellular networks.

  5. A reliable incremental method of computing the limit load in deformation plasticity based on compliance: Continuous and discrete setting

    Czech Academy of Sciences Publication Activity Database

    Haslinger, Jaroslav; Repin, S.; Sysala, Stanislav

    2016-01-01

    Roč. 303, September 2016 (2016), s. 156-170 ISSN 0377-0427 R&D Projects: GA MŠk LQ1602; GA ČR GA13-18652S Institutional support: RVO:68145535 Keywords : variational problems with linear growth energy * incremental limit analysis * elastic-perfectly plastic problems * finite element approximation Subject RIV: BA - General Mathematics Impact factor: 1.357, year: 2016 http://www.sciencedirect.com/science/article/pii/S0377042716300917

  6. Trichotillomania: the impact of treatment history on the outcome of an Internet-based intervention.

    Science.gov (United States)

    Weidt, Steffi; Bruehl, Annette Beatrix; Delsignore, Aba; Zai, Gwyneth; Kuenburg, Alexa; Klaghofer, Richard; Rufer, Michael

    2017-01-01

    Many patients suffering from trichotillomania (TTM) have never undergone treatment. Without treatment, TTM often presents with a chronic course. Characteristics of TTM individuals who have never been treated (untreated) remain largely unknown. Whether treatment history impacts Internet-based interventions has not yet been investigated. We aimed to answer whether Internet-based interventions can reach untreated individuals and whether treatment history is associated with certain characteristics and impacts on the outcome of an Internet-based intervention. We provided Internet-based interventions. Subjects were characterized at three time points using the Massachusetts General Hospital Hairpulling Scale, Hamilton Depression Rating Scale, and the World Health Organization Quality of Life questionnaire. Of 105 individuals, 34 were untreated. Health-related quality of life (HRQoL) was markedly impaired in untreated and treated individuals. Symptom severity did not differ between untreated and treated individuals. Nontreatment was associated with fewer depressive symptoms ( P =0.002). Treatment history demonstrated no impact on the outcome of Internet-based interventions. Results demonstrate that Internet-based interventions can reach untreated TTM individuals. They show that untreated individuals benefit as much as treated individuals from such interventions. Future Internet-based interventions should focus on how to best reach/support untreated individuals with TTM. Additionally, future studies may examine whether Internet-based interventions can reach and help untreated individuals suffering from other psychiatric disorders.

  7. Impact of Participatory Health Research: A Test of the Community-Based Participatory Research Conceptual Model

    Directory of Open Access Journals (Sweden)

    John G. Oetzel

    2018-01-01

    Full Text Available Objectives. A key challenge in evaluating the impact of community-based participatory research (CBPR is identifying what mechanisms and pathways are critical for health equity outcomes. Our purpose is to provide an empirical test of the CBPR conceptual model to address this challenge. Methods. A three-stage quantitative survey was completed: (1 294 US CBPR projects with US federal funding were identified; (2 200 principal investigators completed a questionnaire about project-level details; and (3 450 community or academic partners and principal investigators completed a questionnaire about perceived contextual, process, and outcome variables. Seven in-depth qualitative case studies were conducted to explore elements of the model not captured in the survey; one is presented due to space limitations. Results. We demonstrated support for multiple mechanisms illustrated by the conceptual model using a latent structural equation model. Significant pathways were identified, showing the positive association of context with partnership structures and dynamics. Partnership structures and dynamics showed similar associations with partnership synergy and community involvement in research; both of these had positive associations with intermediate community changes and distal health outcomes. The case study complemented and extended understandings of the mechanisms of how partnerships can improve community conditions. Conclusions. The CBPR conceptual model is well suited to explain key relational and structural pathways for impact on health equity outcomes.

  8. Improved squark and gluino mass limits from searches for supersymmetry at hardon colliders

    Energy Technology Data Exchange (ETDEWEB)

    Beenakker, Wim; Niessen, Irene [Theoretical High Energy Physics, IMAPP, Nijmegen (Netherlands); Brensing, Silja [DESY, Hamburg (Germany). Theory Group; D' Onofrio, Monica [Liverpool Univ. (United Kingdom). Oliver Lodge Lab.; Kraemer, Michael; Kulesza, Anna [RWTH Aachen Univ. (Germany). Inst. for Theoretical Particle Physics and Cosmology; Laenen, Eric [ITFA, Amsterdam Univ. (Netherlands); Nikhef, Amsterdam (Netherlands); ITF, Utrecht Univ. (Netherlands); Martinez, Mario [Barcelona Univ., Bellaterra (Spain). ICREA and Inst. de Fisica d' Altes Energies, IFAE

    2011-09-15

    Squarks and gluinos have been searched for at hadron colliders in events with multiple jets and missing transverse energy. No excess has been observed to date, and from a comparison of experimental cross section limits and theoretical cross section predictions one can deduce lower bounds on the squark and gluino masses. We present an improved analysis of squark and gluino mass bounds which is based on state-of-the-art cross section calculations including the summation of large threshold corrections. For illustration, we consider experimental data obtained by the CDF collaboration at the Fermilab Tevatron and discuss the impact of the improved cross section predictions on the squark and gluino mass limits. (orig.)

  9. Improved squark and gluino mass limits from searches for supersymmetry at hardon colliders

    International Nuclear Information System (INIS)

    Beenakker, Wim; Niessen, Irene; Brensing, Silja; Martinez, Mario

    2011-09-01

    Squarks and gluinos have been searched for at hadron colliders in events with multiple jets and missing transverse energy. No excess has been observed to date, and from a comparison of experimental cross section limits and theoretical cross section predictions one can deduce lower bounds on the squark and gluino masses. We present an improved analysis of squark and gluino mass bounds which is based on state-of-the-art cross section calculations including the summation of large threshold corrections. For illustration, we consider experimental data obtained by the CDF collaboration at the Fermilab Tevatron and discuss the impact of the improved cross section predictions on the squark and gluino mass limits. (orig.)

  10. Relationship of employee-reported work limitations to work productivity.

    Science.gov (United States)

    Lerner, Debra; Amick, Benjamin C; Lee, Jennifer C; Rooney, Ted; Rogers, William H; Chang, Hong; Berndt, Ernst R

    2003-05-01

    Work limitation rates are crucial indicators of the health status of working people. If related to work productivity, work limitation rates may also supply important information about the economic burden of illness. Our objective was to assess the productivity impact of on-the-job work limitations due to employees' physical or mental health problems. Subjects were asked to complete a self-administered survey on the job during 3 consecutive months. Using robust regression analysis, we tested the relationship of objectively-measured work productivity to employee-reported work limitations. We attempted to survey employees of a large firm within 3 different jobs. The survey response rate was 2245 (85.9%). Full survey and productivity data were available for 1827 respondents. Each survey included a validated self-report instrument, the Work Limitations Questionnaire (WLQ). The firm provided objective, employee-level work productivity data. In adjusted regression analyses (n = 1827), employee work productivity (measured as the log of units produced/hour) was significantly associated with 3 dimensions of work limitations: limitations handling the job's time and scheduling demands (P = 0.003), physical job demands (P = 0.001), and output demands (P = 0.006). For every 10% increase in on-the-job work limitations reported on each of the 3 WLQ scales, work productivity declined approximately 4 to 5%. Employee work limitations have a negative impact on work productivity. Employee assessments of their work limitations supply important proxies for the economic burden of health problems.

  11. A Model to Assess the Behavioral Impacts of Consultative Knowledge Based Systems.

    Science.gov (United States)

    Mak, Brenda; Lyytinen, Kalle

    1997-01-01

    This research model studies the behavioral impacts of consultative knowledge based systems (KBS). A study of graduate students explored to what extent their decisions were affected by user participation in updating the knowledge base; ambiguity of decision setting; routinization of usage; and source credibility of the expertise embedded in the…

  12. Numerical Limit Analysis:

    DEFF Research Database (Denmark)

    Damkilde, Lars

    2007-01-01

    Limit State analysis has a long history and many prominent researchers have contributed. The theoretical foundation is based on the upper- and lower-bound theorems which give a very comprehensive and elegant formulation on complicated physical problems. In the pre-computer age Limit State analysis...... also enabled engineers to solve practical problems within reinforced concrete, steel structures and geotechnics....

  13. Health Economics as Rhetoric: The Limited Impact of Health Economics on Funding Decisions in Four European Countries.

    Science.gov (United States)

    Franken, Margreet; Heintz, Emelie; Gerber-Grote, Andreas; Raftery, James

    2016-12-01

    A response to the challenge of high-cost treatments in health care has been economic evaluation. Cost-effectiveness analysis presented as cost per quality-adjusted life-years gained has been controversial, raising heated support and opposition. To assess the impact of economic evaluation in decisions on what to fund in four European countries and discuss the implications of our findings. We used a protocol to review the key features of the application of economic evaluation in reimbursement decision making in England, Germany, the Netherlands, and Sweden, reporting country-specific highlights. Although the institutions and processes vary by country, health economic evaluation has had limited impact on restricting access of controversial high-cost drugs. Even in those countries that have gone the furthest, ways have been found to avoid refusing to fund high-cost drugs for particular diseases including cancer, multiple sclerosis, and orphan diseases. Economic evaluation may, however, have helped some countries to negotiate price reductions for some drugs. It has also extended to the discussion of clinical effectiveness to include cost. The differences in approaches but similarities in outcomes suggest that health economic evaluation be viewed largely as rhetoric (in D.N. McCloskey's terms in The Rhetoric of Economics, 1985). This is not to imply that economics had no impact: rather that it usually contributed to the discourse in ways that differed by country. The reasons for this no doubt vary by perspective, from political science to ethics. Economic evaluation may have less to do with rationing or denial of medical treatments than to do with expanding the discourse used to discuss such issues. Copyright © 2016 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  14. The Net Stable Funding Ratio; Impact and Issues for Consideration

    OpenAIRE

    Jeanne Gobat; Mamoru Yanase; Joseph Maloney

    2014-01-01

    As part of Basel III reforms, the NSFR is a new prudential liquidity rule aimed at limiting excess maturity transformation risk in the banking sector and promoting funding stability. The revised package has been issued for public consultation with a plan of making the rule binding in 2018. This paper complements earlier quantitative impact studies by discussing the potential impact of introducing the NSFR based on empirical analysis of end-2012 financial data for over 2000 banks covering 128 ...

  15. Biogeochemical provinces in the global ocean based on phytoplankton growth limitation

    Science.gov (United States)

    Hashioka, T.; Hirata, T.; Aita, M. N.; Chiba, S.

    2016-02-01

    The biogeochemical province is one of the useful concepts for the comprehensive understanding of regional differences of the marine ecosystem. Various biogeochemical provinces for lower-trophic level ecosystem have been proposed using a similarity-based classification of seasonal variations of chl-a concentration typified by Longhurst 1995 and 2006. Such categorizations well capture the regional differences of seasonality as "total phytoplankton". However, background biogeochemical mechanism to characterize the province boundary is not clear. Namely, the dominant phytoplankton group is different among regions and seasons, and their physiological characteristics are significantly different among groups. Recently some pieces of new biogeochemical information are available. One is an estimation of phytoplankton community structure from satellite observation, and it makes clear the key phytoplankton type in each region. Another is an estimation of limitation factors for phytoplankton growth (e.g., nutrients, temperature, light) in each region from modeling studies. In this study, we propose new biogeochemical provinces as a combination between the dominance of phytoplankton (i.e., diatoms, nano-, pico-phytoplankton or coexistence of two/three types) and their growth limitation factors (particularly we focused on nutrient limitation; N, P, Si or Fe). In this combination, we classified the global ocean into 23 biogeochemical provinces. The result suggests that even if the same type of phytoplankton dominates, the background mechanism could be different among regions. On the contrary, even if the regions geographically separate, the background mechanism could be similar among regions. This is important to understand that region/boundary does respond to environmental change. This biogeochemical province is useful for identification of key areas for future observation.

  16. Upper Limit for Regional Sea Level Projections

    Science.gov (United States)

    Jevrejeva, Svetlana; Jackson, Luke; Riva, Riccardo; Grinsted, Aslak; Moore, John

    2016-04-01

    With more than 150 million people living within 1 m of high tide future sea level rise is one of the most damaging aspects of warming climate. The latest Intergovernmental Panel on Climate Change report (AR5 IPCC) noted that a 0.5 m rise in mean sea level will result in a dramatic increase the frequency of high water extremes - by an order of magnitude, or more in some regions. Thus the flood threat to the rapidly growing urban populations and associated infrastructure in coastal areas are major concerns for society. Hence, impact assessment, risk management, adaptation strategy and long-term decision making in coastal areas depend on projections of mean sea level and crucially its low probability, high impact, upper range. With probabilistic approach we produce regional sea level projections taking into account large uncertainties associated with Greenland and Antarctica ice sheets contribution. We calculate the upper limit (as 95%) for regional sea level projections by 2100 with RCP8.5 scenario, suggesting that for the most coastlines upper limit will exceed the global upper limit of 1.8 m.

  17. Fundamental limits on quantum dynamics based on entropy change

    Science.gov (United States)

    Das, Siddhartha; Khatri, Sumeet; Siopsis, George; Wilde, Mark M.

    2018-01-01

    It is well known in the realm of quantum mechanics and information theory that the entropy is non-decreasing for the class of unital physical processes. However, in general, the entropy does not exhibit monotonic behavior. This has restricted the use of entropy change in characterizing evolution processes. Recently, a lower bound on the entropy change was provided in the work of Buscemi, Das, and Wilde [Phys. Rev. A 93(6), 062314 (2016)]. We explore the limit that this bound places on the physical evolution of a quantum system and discuss how these limits can be used as witnesses to characterize quantum dynamics. In particular, we derive a lower limit on the rate of entropy change for memoryless quantum dynamics, and we argue that it provides a witness of non-unitality. This limit on the rate of entropy change leads to definitions of several witnesses for testing memory effects in quantum dynamics. Furthermore, from the aforementioned lower bound on entropy change, we obtain a measure of non-unitarity for unital evolutions.

  18. Impacted “Phytobezoar” at the Base of Meckle's Diverticulum | Gupta ...

    African Journals Online (AJOL)

    Bezoars have been known to cause obstruction of any portion of the gastrointestinal tract. This case report describes a patient with a surgically treated bezoar impacted at the base of Meckel's diverticulum causing acute intestinal obstruction. In the absence of prior gastric surgery this makes one of the rarest causes of ...

  19. Impact of region contouring variability on image-based focal therapy evaluation

    Science.gov (United States)

    Gibson, Eli; Donaldson, Ian A.; Shah, Taimur T.; Hu, Yipeng; Ahmed, Hashim U.; Barratt, Dean C.

    2016-03-01

    Motivation: Focal therapy is an emerging low-morbidity treatment option for low-intermediate risk prostate cancer; however, challenges remain in accurately delivering treatment to specified targets and determining treatment success. Registered multi-parametric magnetic resonance imaging (MPMRI) acquired before and after treatment can support focal therapy evaluation and optimization; however, contouring variability, when defining the prostate, the clinical target volume (CTV) and the ablation region in images, reduces the precision of quantitative image-based focal therapy evaluation metrics. To inform the interpretation and clarify the limitations of such metrics, we investigated inter-observer contouring variability and its impact on four metrics. Methods: Pre-therapy and 2-week-post-therapy standard-of-care MPMRI were acquired from 5 focal cryotherapy patients. Two clinicians independently contoured, on each slice, the prostate (pre- and post-treatment) and the dominant index lesion CTV (pre-treatment) in the T2-weighted MRI, and the ablated region (post-treatment) in the dynamic-contrast- enhanced MRI. For each combination of clinician contours, post-treatment images were registered to pre-treatment images using a 3D biomechanical-model-based registration of prostate surfaces, and four metrics were computed: the proportion of the target tissue region that was ablated and the target:ablated region volume ratio for each of two targets (the CTV and an expanded planning target volume). Variance components analysis was used to measure the contribution of each type of contour to the variance in the therapy evaluation metrics. Conclusions: 14-23% of evaluation metric variance was attributable to contouring variability (including 6-12% from ablation region contouring); reducing this variability could improve the precision of focal therapy evaluation metrics.

  20. Cycling of conventional power plants: Technical limits and actual costs

    International Nuclear Information System (INIS)

    Van den Bergh, Kenneth; Delarue, Erik

    2015-01-01

    Highlights: • Literature reports a wide range of cycling parameters (technical and cost-related). • The impact of different cycling parameters is assessed. • The German 2013 system is studied as a case study. • Even for stringent parameters, the dynamic limit of the portfolio is not reached. • Cycling costs can be reduced with 40% when taken into account in the scheduling. - Abstract: Cycling of conventional generation units is an important source of operational flexibility in the electricity generation system. Cycling is changing the power output of conventional units by means of ramping and switching (starting up and shutting down). In the literature, a wide range of technical and cost-related cycling parameters can be found. Different studies allocate different cycling parameters to similar generation units. This paper assesses the impact of different cycling parameters allocated to a conventional generation portfolio. Both the technical limitations of power plants and all costs related to cycling are considered. The results presented in this paper follow from a unit commitment model, used for a case study based on the German 2013 system. The conventional generation portfolio has to deliver different residual load time series, corresponding to different levels of renewables penetration. The study shows, under the assumptions made, that although the dynamic limits of some units are reached, the limits of the conventional generation portfolio as a whole are not reached, even if stringent dynamic parameters are assigned to the generation portfolio and a highly variable residual load is imposed to the system. The study shows also the importance of including full cycling costs in the unit commitment scheduling. The cycling cost can be reduced by up to 40% when fully taken into account

  1. Institutionalizing social impact assessment in Bangladesh resource management: limitations and opportunities

    International Nuclear Information System (INIS)

    Momtaz, Salim

    2005-01-01

    Consideration of social issues in environmental impact assessment (EIA) of development projects has been an integral part of project cycle since the inception of EIA in Bangladesh in the early 1990s. This paper examines the emergence of social impact assessment (SIA) in Bangladesh environmental management and its institutionalization. It reveals that although SIA does not have a statutory status like EIA, social dimensions are firmly established in donor funded poverty alleviation projects. It is proposed that SIA is given a clear legislative mandate. The Department of Environment (DOE) - the agency that looks after the implementation of EIA on behalf of the government--needs to be strengthened and transparent in order to play a more effective role

  2. Impact of a future H2-based road transportation sector on the composition and chemistry of the atmosphere - Part 2: Stratospheric ozone

    Science.gov (United States)

    Wang, D.; Jia, W.; Olsen, S. C.; Wuebbles, D. J.; Dubey, M. K.; Rockett, A. A.

    2013-07-01

    The prospective future adoption of molecular hydrogen (H2) to power the road transportation sector could greatly improve tropospheric air quality but also raises the question of whether the adoption would have adverse effects on the stratospheric ozone. The possibility of undesirable impacts must be fully evaluated to guide future policy decisions. Here we evaluate the possible impact of a future (2050) H2-based road transportation sector on stratospheric composition and chemistry, especially on the stratospheric ozone, with the MOZART (Model for OZone And Related chemical Tracers) model. Since future growth is highly uncertain, we evaluate the impact of two world evolution scenarios, one based on an IPCC (Intergovernmental Panel on Climate Change) high-emitting scenario (A1FI) and the other on an IPCC low-emitting scenario (B1), as well as two technological options: H2 fuel cells and H2 internal combustion engines. We assume a H2 leakage rate of 2.5% and a complete market penetration of H2 vehicles in 2050. The model simulations show that a H2-based road transportation sector would reduce stratospheric ozone concentrations as a result of perturbed catalytic ozone destruction cycles. The magnitude of the impact depends on which growth scenario evolves and which H2 technology option is applied. For the evolution growth scenario, stratospheric ozone decreases more in the H2 fuel cell scenarios than in the H2 internal combustion engine scenarios because of the NOx emissions in the latter case. If the same technological option is applied, the impact is larger in the A1FI emission scenario. The largest impact, a 0.54% decrease in annual average global mean stratospheric column ozone, is found with a H2 fuel cell type road transportation sector in the A1FI scenario; whereas the smallest impact, a 0.04% increase in stratospheric ozone, is found with applications of H2 internal combustion engine vehicles in the B1 scenario. The impacts of the other two scenarios fall

  3. Impacts of Tourism in Ubud Bali Indonesia: a community-based tourism perspective

    Science.gov (United States)

    Ernawati, N. M.; Sudarmini, N. M.; Sukmawati, N. M. R.

    2018-01-01

    The impact of tourism is vital to be assessed to measure the results of the development, in order to maximize the benefits gained from tourism. Academics are encouraged to conduct research on this field. This study aims to identify the impact of tourism in Ubud tourist destination, Bali, Indonesia. It is a quantitative method, study using survey method, and Factor analysis, Frequency and Mean analyses as analytical tools. The impact of tourism is assessed against impact measurement instrument developed by Koster and Randall. The study used a sample of 170 respondents consisting of teenagers, productive age population, and senior citizens of Ubud. The result of the Average analysis shows that the impact of tourism in Ubud in general lies at 1.9 which indicates that the people are agreed that the impact of tourism in Ubud is positive. Factor analysis classified the impacts of tourism based on the positive or negative influences inflicted on society. Further, the four Factors extracted show: Factor 1 indicates areas of the most obvious positive impact, Factor 4 lies the issues, wherein the community members disagree that tourism effects Ubud positively. It is expected that the analysis of tourism impacts at Ubud could be used as an input by tourism stakeholders in developing a plan for future tourism in Ubud tourist destination, and to anticipate and mitigate the undesirable impacts that may occur and in order to maximise the positive results from tourism.

  4. Physically based probability criterion for exceeding radionuclide concentration limits in heterogeneous bedrock

    International Nuclear Information System (INIS)

    Worman, A.; Xu, S.; Dverstorp, B.

    2004-01-01

    A significant problem in a risk analysis of the repository for high-level nuclear waste is to estimate the barrier effect of the geosphere. The significant spatial variability of the rock properties implies that migrating RNs encounter a distribution of bedrock properties and mass-transfer mechanisms in different proportions along the transport paths. For practical reasons, we will never be able to know exactly this distribution of properties by performing a reasonable amount of measurements in a site investigation. On the contrary, recent experimental studies reveal that crystalline bedrock can possess a marked heterogeneity of various physical and geochemical properties that potentially may have a certain impact on the transport of RNs in fractured bedrock. Also current field investigation techniques provide only fragmentary information of the properties of the geosphere. This is a basic motivation for treating flows of water and solute elements in groundwaters by means of stochastic continuum models. The stochastic analysis is based on the idea that we know only certain point values of the property fields and use this information to estimate intermediate values. The probabilistic properties of the stochastic analysis are suitable input variables for risk analyses of the relevant sequence of extreme events for which empirical observations are rare or non-existing. The purpose of this paper is to outline the implications of the stochastic approach for estimating probabilities that certain concentration limits are exceeded at discharge points from. the bedrock in case of a leakage from the waste repository. The analysis is restricted to the water flow and solute transport in the bedrock alone without consideration of the full sequence of events in a full risk analysis and the Bayesian statistics involved in such conditioned (and cross-correlated) event series. The focus is on the implication for the risk analysis of the auto-covariance structure in bedrock

  5. Flexural properties and impact strength of denture base resins reinforced with micronized glass flakes

    Directory of Open Access Journals (Sweden)

    Ronak H Choksi

    2016-01-01

    Conclusion: Flexural strength of unmodified PMMA denture base resin decreases with increase in the concentration of glass flakes. Impact strength does not show any significant change at 5% concentration of glass flakes and impact strength significantly reduces with the addition of glass flakes in 10% and 20%.

  6. Superconducting magnet radiation limit considerations for fusion reactors

    International Nuclear Information System (INIS)

    Sawan, M.E.; Walstrom, P.L.

    1986-01-01

    The radiation limits for fusion reactor magnets have a direct impact on the cost of electricity. For example, reducing the inboard shield by 1 cm saves up to $3 million in the Tokamak Fusion Core Experiment cost. The magnet components most sensitive to radiation damage are the superconductor, stabilizer, and insulators. Nuclear heating in the magnet affects the design and also impacts the economic performance of the reactor through increased refrigeration costs. The radiation effects in the different components of the magnet are related, as all of them are determined by the flux level in the magnet. Hence, in efforts to push radiation limits, these effects should be considered simultaneously. Furthermore, the levels of radiation effects that correspond to the optimum nuclear heating determined from economic trade-off analysis will be useful in specifying the fluence, dose, and stabilization limit goals for the magnet development program. In this paper, we review the available irradiation data and assess the need for achieving higher irradiation levels

  7. Doublet III limiter performance and implications for mechanical design and material selection for future limiters

    International Nuclear Information System (INIS)

    Sabado, M.M.; Marcus, F.B.; Trester, P.W.; Wesley, J.C.

    1979-10-01

    The plasma limiter system for Doublet III is described. Initially, high-Z materials, Ta-10W for the primary limiter and Mo for the backup limiters, were selected as the most attractive metallic candidates from the standpoint of thermal and structural properties. For the purpose of evaluating the effect of material Z on plasma performance, the nonmagnetic, Ni-base alloy Inconel X-750 was selected for a medium-Z limiter material. Graphite, a low-Z material, will likely be the next limiter material for evaluation. Design and material selection criteria for the different Z ranges are presented. The performance of the high-Z limiters in Doublet III is reviewed for an operation period that included approximately 5000 plasma shots. Changes in surface appearance and metallurgical changes are characterized. Discussion is presented on how and to what extent the high-Z elements affected the performance of the plasma based on theory and measurements in Doublet III. The fabrication processes for the Inconel X-750 limiters are summarized, and, last, observations on early performance of the Inconel limiters are described

  8. Doublet III limiter performance and implications for mechanical design and material selection for future limiters

    Energy Technology Data Exchange (ETDEWEB)

    Sabado, M.M.; Marcus, F.B.; Trester, P.W.; Wesley, J.C.

    1979-10-01

    The plasma limiter system for Doublet III is described. Initially, high-Z materials, Ta-10W for the primary limiter and Mo for the backup limiters, were selected as the most attractive metallic candidates from the standpoint of thermal and structural properties. For the purpose of evaluating the effect of material Z on plasma performance, the nonmagnetic, Ni-base alloy Inconel X-750 was selected for a medium-Z limiter material. Graphite, a low-Z material, will likely be the next limiter material for evaluation. Design and material selection criteria for the different Z ranges are presented. The performance of the high-Z limiters in Doublet III is reviewed for an operation period that included approximately 5000 plasma shots. Changes in surface appearance and metallurgical changes are characterized. Discussion is presented on how and to what extent the high-Z elements affected the performance of the plasma based on theory and measurements in Doublet III. The fabrication processes for the Inconel X-750 limiters are summarized, and, last, observations on early performance of the Inconel limiters are described. (MOW)

  9. Quantifying the impact of transient joint symptoms, chronic joint symptoms, and arthritis: a population-based approach.

    Science.gov (United States)

    Busija, Lucy; Buchbinder, Rachelle; Osborne, Richard H

    2009-10-15

    To estimate the prevalence and co-occurrence of self-reported doctor-diagnosed arthritis, chronic joint symptoms (pain, aching, stiffness, or swelling on most days for a month), and transient joint symptoms (pain, aching, stiffness, or swelling but not on most days for a month), and to compare the sociodemographic characteristics, activity limitations, and health-related quality of life (HRQOL) of people with joint conditions with those who have no self-reported doctor-diagnosed arthritis and no joint symptoms. Data from the 2004 population-based South Australian Health Omnibus Survey (n = 2,840, ages 18-96 years) were used in the study. Activity limitations were assessed using 10 activity limitations questions from the Short Form 36 health survey. HRQOL was assessed using the Assessment of Quality of Life scale. Half of all respondents reported having joint problems, with 26%, 11%, and 13% reporting self-reported doctor-diagnosed arthritis, chronic joint symptoms, and transient joint symptoms, respectively. Chronic joint conditions (self-reported doctor-diagnosed arthritis and chronic joint symptoms) accounted for 74% of all joint problems and were associated with higher odds of activity limitations and poorer HRQOL. The frequency of transient and chronic joint symptoms was highest among middle-aged participants (ages 45-54 years for transient and 45-64 years for chronic joint symptoms) and those who had a body mass index in the obese range. Prevalence of self-reported doctor-diagnosed arthritis increased with age and was higher among women and those who were overweight or obese. This study documented the high prevalence and impact of joint conditions in the community. Chronic joint conditions affect daily life and are substantial barriers for effective public health interventions aimed at reducing obesity and inactivity.

  10. Low-Cost Impact Detection and Location for Automated Inspections of 3D Metallic Based Structures

    Directory of Open Access Journals (Sweden)

    Carlos Morón

    2015-05-01

    Full Text Available This paper describes a new low-cost means to detect and locate mechanical impacts (collisions on a 3D metal-based structure. We employ the simple and reasonably hypothesis that the use of a homogeneous material will allow certain details of the impact to be automatically determined by measuring the time delays of acoustic wave propagation throughout the 3D structure. The location of strategic piezoelectric sensors on the structure and an electronic-computerized system has allowed us to determine the instant and position at which the impact is produced. The proposed automatic system allows us to fully integrate impact point detection and the task of inspecting the point or zone at which this impact occurs. What is more, the proposed method can be easily integrated into a robot-based inspection system capable of moving over 3D metallic structures, thus avoiding (or minimizing the need for direct human intervention. Experimental results are provided to show the effectiveness of the proposed approach.

  11. Jobs and Economic Development Impact (JEDI) Model: Offshore Wind User Reference Guide

    Energy Technology Data Exchange (ETDEWEB)

    Lantz, E.; Goldberg, M.; Keyser, D.

    2013-06-01

    The Offshore Wind Jobs and Economic Development Impact (JEDI) model, developed by NREL and MRG & Associates, is a spreadsheet based input-output tool. JEDI is meant to be a user friendly and transparent tool to estimate potential economic impacts supported by the development and operation of offshore wind projects. This guide describes how to use the model as well as technical information such as methodology, limitations, and data sources.

  12. Limiting factors in caribou population ecology

    Directory of Open Access Journals (Sweden)

    David R. Klein

    1991-10-01

    Full Text Available Caribou and wild reindeer populations fluctuate over time. On this fact there is general agreement. Factors responsible for population limitation and subsequent declines have been examined within the framework of animal population theory. There is, however, little agreement when factors limiting specific populations are generalized to Rangifer populations over broad geographic regions. Comparative examinations of wild Rangifer populations worldwide discloses that factors that have regulated those populations are highly variable between populations, apparently as a reflection of the differences in environmental variables unique to each population. Examples exist of populations where major regulating factors have been climatic extremes, predation, hunting mortality, food limitation, insects, parasites, disease, interspecific competition, and human developmental impacts or combinations of these factors. This diversity of limiting factors affecting caribou and wild reindeer populations is a reflection of the ecologial complexity of the species, a concept that has often been ignored in past efforts to reach management decisions by extrapolation from the limited localized knowledge available on the species.

  13. On-line determination of operating limits incorporating constraint costs and reliability assessment

    International Nuclear Information System (INIS)

    Meisingset, M.; Lovas, G. G.

    1997-01-01

    Problems regarding power system operation following deregulation were discussed. The problems arise as a result of the increased power flow pattern created by deregulation and competitive power markets, resulting in power in excess of N-1, (the capacity of transmission lines available), which in turn creates bottlenecks. In a situation like this, constraint costs and security costs (i.e. the cost of supply interruptions) are incurred as the direct result of the deterministic criteria used in reliability assessment. This paper describes an on-line probabilistic method to determine operating limits based on a trade-off between constraint costs and security costs. The probability of the contingencies depend on the existing weather conditions, which therefore has significant impact on the calculated operating limit. In consequence, the proposed method allows power flow to exceed the N-1 limit during normal weather. Under adverse weather conditions the N-1 criteria should be maintained. 15 refs., 13 figs

  14. The impact of seizures on epilepsy outcomes: A national, community-based survey.

    Science.gov (United States)

    Josephson, Colin B; Patten, Scott B; Bulloch, Andrew; Williams, Jeanne V A; Lavorato, Dina; Fiest, Kirsten M; Secco, Mary; Jette, Nathalie

    2017-05-01

    The aim of this study was to examine the impact of seizures on persons living with epilepsy in a national, community-based setting. The data source was the Survey of Living with Neurological Conditions in Canada (SLNCC), a cohort derived from a national population-based survey of noninstitutionalized persons aged 15 or more years. Participants had to be on a seizure drug or to have had a seizure in the past 5 years to meet the definition of active epilepsy. The respondents were further stratified by seizure status: the seizure group experienced ≥1 seizure in the past 5 years versus the no seizure group who were seizure-free in the past ≥5 years regardless of medication status. Weighted overall and stratified prevalence estimates and odds ratios were used to estimate associations. The SLNCC included 713 persons with epilepsy with a mean age of 45.4 (standard deviation 18.0) years. Fewer people in the seizure group (42.7%) reported being much better than a year ago versus those in the no seizure group (70.1%). Of those with seizures, 32.1% (95% confidence interval [95% CI] 18.8-45.3) had symptoms suggestive of major depression (as per the Patient Health Questionnaire-9) compared to 7.7% (95% CI 3.4-11.9) of those without seizures. Driving, educational, and work opportunities were also significantly limited, whereas stigma was significantly greater in those with seizures. This community-based study emphasizes the need for seizure freedom to improve clinical and psychosocial outcomes in persons with epilepsy. Seizure freedom has an important influence on overall health, as those with at least one seizure over the prior 5 years had an increased risk of mood disorders, worse quality of life, and faced significantly more stigma. Wiley Periodicals, Inc. © 2017 International League Against Epilepsy.

  15. Regulatory impact analysis of final effluent limitations guidelines and standards for the offshore oil and gas industry. Final report

    International Nuclear Information System (INIS)

    1993-01-01

    For all major rulemaking actions, Executive Order 12291 requires a Regulatory Impact Analysis (RIA), in which benefits of the regulation are compared to costs imposed by the regulation. The report presents the Environmental Protection Agency's (EPA, or the Agency) RIA of the final rule on the effluent limitations guidelines for the Offshore Subcategory of the Oil and Gas Extraction Industry. The principal requirement of the Executive Order is that the Agency perform an analysis comparing the benefits of the regulation to the costs that the regulation imposes. Three types of benefits are analyzed in this RIA: quantified and monetized benefits; quantified and non-monetized benefits; and non-quantified and non-monetized benefits

  16. Yield impact for wafer shape misregistration-based binning for overlay APC diagnostic enhancement

    Science.gov (United States)

    Jayez, David; Jock, Kevin; Zhou, Yue; Govindarajulu, Venugopal; Zhang, Zhen; Anis, Fatima; Tijiwa-Birk, Felipe; Agarwal, Shivam

    2018-03-01

    The importance of traditionally acceptable sources of variation has started to become more critical as semiconductor technologies continue to push into smaller technology nodes. New metrology techniques are needed to pursue the process uniformity requirements needed for controllable lithography. Process control for lithography has the advantage of being able to adjust for cross-wafer variability, but this requires that all processes are close in matching between process tools/chambers for each process. When this is not the case, the cumulative line variability creates identifiable groups of wafers1 . This cumulative shape based effect is described as impacting overlay measurements and alignment by creating misregistration of the overlay marks. It is necessary to understand what requirements might go into developing a high volume manufacturing approach which leverages this grouping methodology, the key inputs and outputs, and what can be extracted from such an approach. It will be shown that this line variability can be quantified into a loss of electrical yield primarily at the edge of the wafer and proposes a methodology for root cause identification and improvement. This paper will cover the concept of wafer shape based grouping as a diagnostic tool for overlay control and containment, the challenges in implementing this in a manufacturing setting, and the limitations of this approach. This will be accomplished by showing that there are identifiable wafer shape based signatures. These shape based wafer signatures will be shown to be correlated to overlay misregistration, primarily at the edge. It will also be shown that by adjusting for this wafer shape signal, improvements can be made to both overlay as well as electrical yield. These improvements show an increase in edge yield, and a reduction in yield variability.

  17. Stochastic models for structured populations scaling limits and long time behavior

    CERN Document Server

    Meleard, Sylvie

    2015-01-01

    In this contribution, several probabilistic tools to study population dynamics are developed. The focus is on scaling limits of qualitatively different stochastic individual based models and the long time behavior of some classes of limiting processes. Structured population dynamics are modeled by measure-valued processes describing the individual behaviors and taking into account the demographic and mutational parameters, and possible interactions between individuals. Many quantitative parameters appear in these models and several relevant normalizations are considered, leading  to infinite-dimensional deterministic or stochastic large-population approximations. Biologically relevant questions are considered, such as extinction criteria, the effect of large birth events, the impact of  environmental catastrophes, the mutation-selection trade-off, recovery criteria in parasite infections, genealogical properties of a sample of individuals. These notes originated from a lecture series on Structured P...

  18. Impact of a competency based curriculum on quality improvement among internal medicine residents.

    Science.gov (United States)

    Fok, Mark C; Wong, Roger Y

    2014-11-28

    Teaching quality improvement (QI) principles during residency is an important component of promoting patient safety and improving quality of care. The literature on QI curricula for internal medicine residents is limited. We sought to evaluate the impact of a competency based curriculum on QI among internal medicine residents. This was a prospective, cohort study over four years (2007-2011) using pre-post curriculum comparison design in an internal medicine residency program in Canada. Overall 175 post-graduate year one internal medicine residents participated. A two-phase, competency based curriculum on QI was developed with didactic workshops and longitudinal, team-based QI projects. The main outcome measures included self-assessment, objective assessment using the Quality Improvement Knowledge Assessment Tool (QIKAT) scores to assess QI knowledge, and performance-based assessment via presentation of longitudinal QI projects. Overall 175 residents participated, with a response rate of 160/175 (91%) post-curriculum and 114/175 (65%) after conducting their longitudinal QI project. Residents' self-reported confidence in making changes to improve health increased and was sustained at twelve months post-curriculum. Self-assessment scores of QI skills improved significantly from pre-curriculum (53.4 to 69.2 percent post-curriculum [p-value 0.002]) and scores were sustained at twelve months after conducting their longitudinal QI projects (53.4 to 72.2 percent [p-value 0.005]). Objective scores using the QIKAT increased post-curriculum from 8.3 to 10.1 out of 15 (p-value for difference value for difference from pre-curriculum based assessment occurred via presentation of all projects at the annual QI Project Podium Presentation Day. The competency based curriculum on QI improved residents' QI knowledge and skills during residency training. Importantly, residents perceived that their QI knowledge improved after the curriculum and this also correlated to improved QIKAT

  19. A single frequency component-based re-estimated MUSIC algorithm for impact localization on complex composite structures

    International Nuclear Information System (INIS)

    Yuan, Shenfang; Bao, Qiao; Qiu, Lei; Zhong, Yongteng

    2015-01-01

    The growing use of composite materials on aircraft structures has attracted much attention for impact monitoring as a kind of structural health monitoring (SHM) method. Multiple signal classification (MUSIC)-based monitoring technology is a promising method because of its directional scanning ability and easy arrangement of the sensor array. However, for applications on real complex structures, some challenges still exist. The impact-induced elastic waves usually exhibit a wide-band performance, giving rise to the difficulty in obtaining the phase velocity directly. In addition, composite structures usually have obvious anisotropy, and the complex structural style of real aircrafts further enhances this performance, which greatly reduces the localization precision of the MUSIC-based method. To improve the MUSIC-based impact monitoring method, this paper first analyzes and demonstrates the influence of measurement precision of the phase velocity on the localization results of the MUSIC impact localization method. In order to improve the accuracy of the phase velocity measurement, a single frequency component extraction method is presented. Additionally, a single frequency component-based re-estimated MUSIC (SFCBR-MUSIC) algorithm is proposed to reduce the localization error caused by the anisotropy of the complex composite structure. The proposed method is verified on a real composite aircraft wing box, which has T-stiffeners and screw holes. Three typical categories of 41 impacts are monitored. Experimental results show that the SFCBR-MUSIC algorithm can localize impact on complex composite structures with an obviously improved accuracy. (paper)

  20. Quantifying regional consumption-based health impacts attributable to ambient air pollution in China.

    Science.gov (United States)

    Zhang, Yanxia; Qu, Shen; Zhao, Jing; Zhu, Ge; Zhang, Yanxu; Lu, Xi; Sabel, Clive E; Wang, Haikun

    2018-03-01

    Serious air pollution has caused about one million premature deaths per year in China recently. Besides cross-border atmospheric transport of air pollution, trade also relocates pollution and related health impacts across China as a result of the spatial separation between consumption and production. This study proposes an approach for calculating the health impacts of emissions due to a region's consumption based on a multidisciplinary methodology coupling economic, atmospheric, and epidemiological models. These analyses were performed for China's Beijing and Hebei provinces. It was found that these provinces' consumption-based premature deaths attributable to ambient PM 2.5 were respectively 22,500 and 49,700, which were 23% higher and 37% lower than the numbers solely within their boundaries in 2007. The difference between the effects of trade and trade-related emissions on premature deaths attributable to air pollution in a region has also been clarified. The results illustrate the large and broad impact of domestic trade on regional air quality and the need for comprehensive consideration of supply chains in designing policy to mitigate the negative health impacts of air pollution across China. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Theory-based scaling of the SOL width in circular limited tokamak plasmas

    International Nuclear Information System (INIS)

    Halpern, F.D.; Ricci, P.; Labit, B.; Furno, I.; Jolliet, S.; Loizu, J.; Mosetto, A.; Arnoux, G.; Silva, C.; Gunn, J.P.; Horacek, J.; Kočan, M.; LaBombard, B.

    2013-01-01

    A theory-based scaling for the characteristic length of a circular, limited tokamak scrape-off layer (SOL) is obtained by considering the balance between parallel losses and non-linearly saturated resistive ballooning mode turbulence driving anomalous perpendicular transport. The SOL size increases with plasma size, resistivity, and safety factor q. The scaling is verified against flux-driven non-linear turbulence simulations, which reveal good agreement within a wide range of dimensionless parameters, including parameters closely matching the TCV tokamak. An initial comparison of the theory against experimental data from several tokamaks also yields good agreement. (letter)

  2. The implications of the new sulphur limits on the European Ro-Ro sector

    DEFF Research Database (Denmark)

    Zis, Thalis; Psaraftis, Harilaos N.

    -based alternatives. The exact repercussions of the new sulphur limits are difficult to identify in the wake of significant recent reductions of the fuel prices for both low-sulphur and heavy fuel oil. This paper presents a modal split model that estimates modal shifts vis-a-vis competing maritime and land......In an effort to reduce the environmental impacts of maritime transportation, the International Maritime Organization (IMO) designated special Sulphur Emission ControlAreas (SECAs) where ships are required to use low-sulphur fuel. In January 2015, the sulphur limit within SECAs was lowered to 0.......1%, which can only be achieved if vessels are using pricier ultra-low sulphur fuel, or invest in abatement technologies. The increased operating costs borne by Ro-Ro operators in SECAs due to the stricter limits can result in the shutting down of some routes and a redistribution of cargo flows with land...

  3. Neural Network-Based Receiver in Band-Limited Communication System with MPPSK Modulation

    Directory of Open Access Journals (Sweden)

    Wang Zixin

    2018-01-01

    Full Text Available As a type of the spectrally efficient modulation, the m-ary phase position shift keying (MPPSK has been considered to meet the increasing spectrum requirement in the future wireless system. To limit the signal bandwidth and cancel the out-band interference the band-pass filters are used, which introduce the waveform distortion and inter-symbol interference (ISI. Therefore, a single hidden-layer neural network (NN-based receiver is proposed to jointly equalize and demodulate the received signal. The impulse response of the system is static and the network parameters can be obtained after off-line training. The number of the hidden nodes is also determined through simulations. Simulation results show that the NN-based receiver works well in the communication system with different allocated bandwidths. By observing the modified confusion matrix, the false symbol decision is relevant to modulation index, waveform distortions and the ISI.

  4. Chromatic Roots and Limits of Dense Graphs

    Czech Academy of Sciences Publication Activity Database

    Csikvári, P.; Frenkel, E.; Hladký, Jan; Hubai, T.

    2017-01-01

    Roč. 340, č. 5 (2017), s. 1129-1135 ISSN 0012-365X Institutional support: RVO:67985807 Keywords : chromatic root * graph limit * holomorphic moment Subject RIV: BA - General Mathematics OBOR OECD: Pure mathematics Impact factor: 0.639, year: 2016

  5. Climate limits across space and time on European forest structure

    Science.gov (United States)

    Moreno, A. L. S.; Neumann, M.; Hasenauer, H.

    2017-12-01

    The impact climate has on forests has been extensively studied. However, the large scale effect climate has on forest structures, such as average diameters, heights and basal area are understudied in a spatially explicit manner. The limits, tipping points and thresholds that climate places on forest structures dictate the services a forest may provide, the vulnerability of a forest to mortality and the potential value of the timber there within. The majority of current research either investigates climate impacts on forest pools and fluxes, on a tree physiological scale or on case studies that are used to extrapolate results and potential impacts. A spatially explicit study on how climate affects forest structure over a large region would give valuable information to stakeholders who are more concerned with ecosystem services that cannot be described by pools and fluxes but require spatially explicit information - such as biodiversity, habitat suitability, and market values. In this study, we quantified the limits that climate (maximum, minimum temperature and precipitation) places on 3 forest structures, diameter at breast height, height, and basal area throughout Europe. Our results show clear climatic zones of high and low upper limits for each forest structure variable studied. We also spatially analyzed how climate restricts the potential bio-physical upper limits and creates tipping points of each forest structure variable and which climate factors are most limiting. Further, we demonstrated how the climate change has affected 8 individual forests across Europe and then the continent as a whole. We find that diameter, height and basal area are limited by climate in different ways and that areas may have high upper limits in one structure and low upper limits in another limitted by different climate variables. We also found that even though individual forests may have increased their potential upper limit forest structure values, European forests as a whole

  6. Effluent release limits, sources and control

    International Nuclear Information System (INIS)

    Swindell, G.E.

    1977-01-01

    Objectives of radiation protection in relation to releases. Environmental transfer models for radionuclides. Relationship between releases, environmental levels and doses to persons. Establishment of release limits: Limits based on critical population group concept critical pathway analysis and identification of critical group. Limits based on optimization of radiation protection individual dose limits, collective doses and dose commitments 1) differential cost benefit analysis 2) authorized and operational limits taking account of future exposures. Monitoring of releases to the environment: Objectives of effluent monitoring. Typical sources and composition of effluents; design and operation of monitoring programmes; recording and reporting of monitoring results; complementary environmental monitoring. (orig.) [de

  7. Nonlinear dynamics between linear and impact limits

    CERN Document Server

    Pilipchuk, Valery N; Wriggers, Peter

    2010-01-01

    This book examines nonlinear dynamic analyses based on the existence of strongly nonlinear but simple counterparts to the linear models and tools. Discusses possible application to periodic elastic structures with non-smooth or discontinuous characteristics.

  8. Impact on colorectal cancer mortality of screening programmes based on the faecal immunochemical test.

    Science.gov (United States)

    Zorzi, Manuel; Fedeli, Ugo; Schievano, Elena; Bovo, Emanuela; Guzzinati, Stefano; Baracco, Susanna; Fedato, Chiara; Saugo, Mario; Dei Tos, Angelo Paolo

    2015-05-01

    Colorectal cancer (CRC) screening programmes based on the guaiac faecal occult blood test (gFOBT) reduce CRC-specific mortality. Several studies have shown higher sensitivity with the faecal immunochemical test (FIT) compared with gFOBT. We carried out an ecological study to evaluate the impact of FIT-based screening programmes on CRC mortality. In the Veneto Region (Italy), biennial FIT-based screening programmes that invited 50-69-year-old residents were introduced in different areas between 2002 and 2009. We compared CRC mortality rates from 1995 to 2011 between the areas where screening started in 2002-2004 (early screening areas (ESA)) and areas that introduced the screening in 2008-2009 (late screening areas (LSA)) using Poisson regression models. We also compared available data on CRC incidence rates (1995-2007) and surgical resection rates (2001-2012). Before the introduction of screening, CRC mortality and incidence rates in the two areas were similar. Compared with 1995-2000, 2006-2011 mortality rates were 22% lower in the ESA than in the LSA (rate ratio (RR)=0.78; 95% CI 0.68 to 0.89). The reduction was larger in women (RR=0.64; CI 0.51 to 0.80) than in men (RR=0.87; CI 0.73 to 1.04). In the ESA, incidence and surgery rates peaked during the introduction of the screening programme and then returned to the baseline (2006-2007 incidence) or dropped below initial values (surgery after 2007). FIT-based screening programmes were associated with a significant reduction in CRC mortality. This effect took place much earlier than reported by gFOBT-based trials and observational studies. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  9. Implementation of a competency-based residency curriculum : experiences from a resource-limited environment in the Caribbean

    NARCIS (Netherlands)

    Busari, Jamiu O.; Verhagen, Eduard A. A.; Muskiet, Fred D.; Duits, Ashley J.

    2008-01-01

    Background: The introduction of competency-based curricula in institutions situated in resource-limited environments is likely to pose new challenges for the implementation process. The St. Elisabeth Hospital (SEHOS) in Curacao, Dutch Caribbean, is affiliated to university teaching hospitals in the

  10. Laboratory-scale in situ bioremediation in heterogeneous porous media: biokinetics-limited scenario.

    Science.gov (United States)

    Song, Xin; Hong, Eunyoung; Seagren, Eric A

    2014-03-01

    Subsurface heterogeneities influence interfacial mass-transfer processes and affect the application of in situ bioremediation by impacting the availability of substrates to the microorganisms. However, for difficult-to-degrade compounds, and/or cases with inhibitory biodegradation conditions, slow biokinetics may also limit the overall bioremediation rate, or be as limiting as mass-transfer processes. In this work, a quantitative framework based on a set of dimensionless coefficients was used to capture the effects of the competing interfacial and biokinetic processes and define the overall rate-limiting process. An integrated numerical modeling and experimental approach was used to evaluate application of the quantitative framework for a scenario in which slow-biokinetics limited the overall bioremediation rate of a polycyclic aromatic hydrocarbon (naphthalene). Numerical modeling was conducted to simulate the groundwater flow and naphthalene transport and verify the system parameters, which were used in the quantitative framework application. The experiments examined the movement and biodegradation of naphthalene in a saturated, heterogeneous intermediate-scale flow cell with two layers of contrasting hydraulic conductivities. These experiments were conducted in two phases: Phase I, simulating an inhibited slow biodegradation; and Phase II, simulating an engineered bioremediation, with system perturbations selected to enhance the slow biodegradation rate. In Phase II, two engineered perturbations to the system were selected to examine their ability to enhance in situ biodegradation. In the first perturbation, nitrogen and phosphorus in excess of the required stoichiometric amounts were spiked into the influent solution to mimic a common remedial action taken in the field. The results showed that this perturbation had a moderate positive impact, consistent with slow biokinetics being the overall rate-limiting process. However, the second perturbation, which was to

  11. Environmental Impacts of Plant-Based Diets: How Does Organic Food Consumption Contribute to Environmental Sustainability?

    Directory of Open Access Journals (Sweden)

    Camille Lacour

    2018-02-01

    Full Text Available BackgroundStudies investigating diet-related environmental impacts have rarely considered the production method of the foods consumed. The objective of the present study, based on the NutriNet-Santé cohort, was to investigate the relationship between a provegetarian score and diet-related environmental impacts. We also evaluated potential effect modifications on the association between a provegetarian score and the environmental impacts of organic food consumption.MethodsFood intake and organic food consumption ratios were obtained from 34,442 French adults using a food frequency questionnaire, which included information on organic food consumption for each group. To characterize the overall structure of the diets, a provegetarian score was used to identify preferences for plant-based products as opposed to animal-based products. Moreover, three environmental indicators were used to assess diet-related environmental impacts: greenhouse gas (GHG emissions, cumulative energy demand (CED, and land occupation. Environmental impacts were assessed using production life cycle assessment (LCA at the farm level. Associations between provegetarian score quintiles, the level of organic food consumption, and environmental indicators were analyzed using ANCOVAs adjusted for energy, sex, and age.ResultsParticipants with diets rich in plant-based foods (fifth quintile were more likely to be older urban dwellers, to hold a higher degree in education, and to be characterized by an overall healthier lifestyle and diet. A higher provegetarian score was associated with lower environmental impacts (GHG emissionsQ5vsQ1 = 838/1,664 kg CO2eq/year, −49.6%, P < 0.0001; CEDQ5vsQ1 = 4,853/6,775 MJ/year, −26.9%, P < 0.0001; land occupationQ5vsQ1 = 2,420/4,138 m2/year, −41.5%, P < 0.0001. Organic food consumption was also an important modulator of the relationship between provegetarian dietary patterns and environmental impacts but only

  12. The impact of design-based modeling instruction on seventh graders' spatial abilities and model-based argumentation

    Science.gov (United States)

    McConnell, William J.

    Due to the call of current science education reform for the integration of engineering practices within science classrooms, design-based instruction is receiving much attention in science education literature. Although some aspect of modeling is often included in well-known design-based instructional methods, it is not always a primary focus. The purpose of this study was to better understand how design-based instruction with an emphasis on scientific modeling might impact students' spatial abilities and their model-based argumentation abilities. In the following mixed-method multiple case study, seven seventh grade students attending a secular private school in the Mid-Atlantic region of the United States underwent an instructional intervention involving design-based instruction, modeling and argumentation. Through the course of a lesson involving students in exploring the interrelatedness of the environment and an animal's form and function, students created and used multiple forms of expressed models to assist them in model-based scientific argument. Pre/post data were collected through the use of The Purdue Spatial Visualization Test: Rotation, the Mental Rotation Test and interviews. Other data included a spatial activities survey, student artifacts in the form of models, notes, exit tickets, and video recordings of students throughout the intervention. Spatial abilities tests were analyzed using descriptive statistics while students' arguments were analyzed using the Instrument for the Analysis of Scientific Curricular Arguments and a behavior protocol. Models were analyzed using content analysis and interviews and all other data were coded and analyzed for emergent themes. Findings in the area of spatial abilities included increases in spatial reasoning for six out of seven participants, and an immense difference in the spatial challenges encountered by students when using CAD software instead of paper drawings to create models. Students perceived 3D printed

  13. Post-impact performance of composites; Predicting Compression after Impact (CAI) in composite laminates

    NARCIS (Netherlands)

    Esrall, F.

    2013-01-01

    Impact damage has been known to seriously limit the performance of composite aircraft structures. In the preliminary design phase, tens of thousands of subparts need to be analyzed for impact. Over the years, many approaches have been proposed to study the creation of impact damage and to determine

  14. Facilitating responsible gambling: the relative effectiveness of education-based animation and monetary limit setting pop-up messages among electronic gaming machine players.

    Science.gov (United States)

    Wohl, Michael J A; Gainsbury, Sally; Stewart, Melissa J; Sztainert, Travis

    2013-12-01

    Although most gamblers set a monetary limit on their play, many exceed this limit--an antecedent of problematic gambling. Responsible gambling tools may assist players to gamble within their means. Historically, however, the impact of such tools has been assessed in isolation. In the current research, two responsible gambling tools that target adherence to a monetary limit were assessed among 72 electronic gaming machine (EGM) players. Participants watched an educational animation explaining how EGMs work (or a neutral video) and then played an EGM in a virtual reality environment. All participants were asked to set a monetary limit on their play, but only half were reminded when that limit was reached. Results showed that both the animation and pop-up limit reminder helped gamblers stay within their preset monetary limit; however, an interaction qualified these main effects. Among participants who did not experience the pop-up reminder, those who watched the animation stayed within their preset monetary limits more than those who did not watch the animation. For those who were reminded of their limit, however, there was no difference in limit adherence between those who watched the animation and those who did not watch the animation. From a responsible gambling perspective, the current study suggests that there is no additive effect of exposure to both responsible gambling tools. Therefore, for minimal disruption in play, a pop-up message reminding gamblers of their preset monetary limit might be preferred over the lengthier educational animation.

  15. Impact of a future H2-based road transportation sector on the composition and chemistry of the atmosphere – Part 2: Stratospheric ozone

    Directory of Open Access Journals (Sweden)

    D. Wang

    2013-07-01

    Full Text Available The prospective future adoption of molecular hydrogen (H2 to power the road transportation sector could greatly improve tropospheric air quality but also raises the question of whether the adoption would have adverse effects on the stratospheric ozone. The possibility of undesirable impacts must be fully evaluated to guide future policy decisions. Here we evaluate the possible impact of a future (2050 H2-based road transportation sector on stratospheric composition and chemistry, especially on the stratospheric ozone, with the MOZART (Model for OZone And Related chemical Tracers model. Since future growth is highly uncertain, we evaluate the impact of two world evolution scenarios, one based on an IPCC (Intergovernmental Panel on Climate Change high-emitting scenario (A1FI and the other on an IPCC low-emitting scenario (B1, as well as two technological options: H2 fuel cells and H2 internal combustion engines. We assume a H2 leakage rate of 2.5% and a complete market penetration of H2 vehicles in 2050. The model simulations show that a H2-based road transportation sector would reduce stratospheric ozone concentrations as a result of perturbed catalytic ozone destruction cycles. The magnitude of the impact depends on which growth scenario evolves and which H2 technology option is applied. For the evolution growth scenario, stratospheric ozone decreases more in the H2 fuel cell scenarios than in the H2 internal combustion engine scenarios because of the NOx emissions in the latter case. If the same technological option is applied, the impact is larger in the A1FI emission scenario. The largest impact, a 0.54% decrease in annual average global mean stratospheric column ozone, is found with a H2 fuel cell type road transportation sector in the A1FI scenario; whereas the smallest impact, a 0.04% increase in stratospheric ozone, is found with applications of H2 internal combustion engine vehicles in the B1 scenario. The impacts of the other two

  16. Reactor limit control system

    International Nuclear Information System (INIS)

    Rubbel, F.E.

    1982-01-01

    The very extensive use of limitations in the operational field between protection system and closed-loop controls is an important feature of German understanding of operational safety. The design of limitations is based on very large activities in the computational field but mostly on the high level of the plant-wide own commissioning experience of a turnkey contractor. Limitations combine intelligence features of closed-loop controls with the high availability of protection systems. (orig.)

  17. Simulation Tools and Techniques for Analyzing the Impacts of Photovoltaic System Integration

    Science.gov (United States)

    Hariri, Ali

    utility simulation software. On the other hand, EMT simulation tools provide high accuracy and visibility over a wide bandwidth of frequencies at the expense of larger processing and memory requirements, limited network size, and long simulation time. Therefore, there is a gap in simulation tools and techniques that can efficiently and effectively identify potential PV impact. New planning simulation tools are needed in order to accommodate for the simulation requirements of new integrated technologies in the electric grid. The dissertation at hand starts by identifying some of the potential impacts that are caused by high PV penetration. A phasor-based quasi-static time series (QSTS) analysis tool is developed in order to study the slow dynamics that are caused by the variations in the PV generation that lead to voltage fluctuations. Moreover, some EMT simulations are performed in order to study the impacts of PV systems on the electric network harmonic levels. These studies provide insights into the type and duration of certain impacts, as well as the conditions that may lead to adverse phenomena. In addition these studies present an idea about the type of simulation tools that are sufficient for each type of study. After identifying some of the potential impacts, certain planning tools and techniques are proposed. The potential PV impacts may cause certain utilities to refrain from integrating PV systems into their networks. However, each electric network has a certain limit beyond which the impacts become substantial and may adversely interfere with the system operation and the equipment along the feeder; this limit is referred to as the hosting limit (or hosting capacity). Therefore, it is important for utilities to identify the PV hosting limit on a specific electric network in order to safely and confidently integrate the maximum possible PV systems. In the following dissertation, two approaches have been proposed for identifying the hosing limit: 1. Analytical

  18. IMPACTS OF GROUP-BASED SIGNAL CONTROL POLICY ON DRIVER BEHAVIOR AND INTERSECTION SAFETY

    Directory of Open Access Journals (Sweden)

    Keshuang TANG

    2008-01-01

    Full Text Available Unlike the typical stage-based policy commonly applied in Japan, the group-based control (often called movement-based in the traffic control industry in Japan refers to such a control pattern that the controller is capable of separately allocating time to each signal group instead of stage based on traffic demand. In order to investigate its applicability at signalized intersections in Japan, an intersection located in Yokkaichi City of Mie Prefecture was selected as an experimental application site by the Japan Universal Traffic Management Society (UTMS. Based on the data collected at the intersection before and after implementing the group-based control policy respectively, this study evaluated the impacts of such a policy on driver behavior and intersection safety. To specify those impacts, a few models utilizing cycle-based data were first developed to interpret the occurrence probability and rate of red-light-running (RLR. Furthermore, analyses were performed on the yellow-entry time (Ye of the last cleared vehicle and post encroachment time (PET during the phase switching. Conclusions supported that the group-based control policy, along with certain other factors, directly or indirectly influenced the RLR behavior of through and right-turn traffics. Meanwhile, it has potential safety benefits as well, indicated by the declined Ye and increased PET values.

  19. Engagement techniques and playing level impact the biomechanical demands on rugby forwards during machine-based scrummaging.

    Science.gov (United States)

    Preatoni, Ezio; Stokes, Keith A; England, Michael E; Trewartha, Grant

    2015-04-01

    This cross-sectional study investigated the factors that may influence the physical loading on rugby forwards performing a scrum by studying the biomechanics of machine-based scrummaging under different engagement techniques and playing levels. 34 forward packs from six playing levels performed repetitions of five different types of engagement techniques against an instrumented scrum machine under realistic training conditions. Applied forces and body movements were recorded in three orthogonal directions. The modification of the engagement technique altered the load acting on players. These changes were in a similar direction and of similar magnitude irrespective of the playing level. Reducing the dynamics of the initial engagement through a fold-in procedure decreased the peak compression force, the peak downward force and the engagement speed in excess of 30%. For example, peak compression (horizontal) forces in the professional teams changed from 16.5 (baseline technique) to 8.6 kN (fold-in procedure). The fold-in technique also reduced the occurrence of combined high forces and head-trunk misalignment during the absorption of the impact, which was used as a measure of potential hazard, by more than 30%. Reducing the initial impact did not decrease the ability of the teams to produce sustained compression forces. De-emphasising the initial impact against the scrum machine decreased the mechanical stresses acting on forward players and may benefit players' welfare by reducing the hazard factors that may induce chronic degeneration of the spine. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  20. DEM analysis of the effect of particle-wall impact on the dispersion performance in carrier-based dry powder inhalers.

    Science.gov (United States)

    Yang, Jiecheng; Wu, Chuan-Yu; Adams, Michael

    2015-06-20

    The impact between particles or agglomerates and a device wall is considered as an important mechanism controlling the dispersion of active pharmaceutical ingredient (API) particles in dry powder inhalers (DPIs). In order to characterise the influencing factors and better understand the impact induced dispersion process for carrier-based DPIs, the impact behaviour between an agglomerate and a wall is systematically investigated using the discrete element method. In this study, a carrier-based agglomerate is initially formed and then allowed to impact with a target wall. The effects of impact velocity, impact angle and work of adhesion on the dispersion performance are analysed. It is shown that API particles in the near-wall regions are more likely to be dispersed due to the deceleration of the carrier particle resulted from the impact with the wall. It is also revealed that the dispersion ratio increases with increasing impact velocity and impact angle, indicating that the normal component of the impact velocity plays a dominant role on the dispersion. Furthermore, the impact induced dispersion performance for carrier-based DPI formulations can be well approximated using a cumulative Weibull distribution function that is governed by the ratio of overall impact energy and adhesion energy. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. Protecting posted genes: social networking and the limits of GINA.

    Science.gov (United States)

    Soo-Jin Lee, Sandra; Borgelt, Emily

    2014-01-01

    The combination of decreased genotyping costs and prolific social media use is fueling a personal genetic testing industry in which consumers purchase and interact with genetic risk information online. Consumers and their genetic risk profiles are protected in some respects by the 2008 federal Genetic Information Nondiscrimination Act (GINA), which forbids the discriminatory use of genetic information by employers and health insurers; however, practical and technical limitations undermine its enforceability, given the everyday practices of online social networking and its impact on the workplace. In the Web 2.0 era, employers in most states can legally search about job candidates and employees online, probing social networking sites for personal information that might bear on hiring and employment decisions. We examine GINA's protections for online sharing of genetic information as well as its limitations, and propose policy recommendations to address current gaps that leave employees' genetic information vulnerable in a Web-based world.

  2. Poset limits can be totally ordered

    Czech Academy of Sciences Publication Activity Database

    Hladký, Jan; Máthé, A.; Viresh, P.; Pikhurko, O.

    2015-01-01

    Roč. 367, č. 6 (2015), s. 4319-4337 ISSN 0002-9947 Institutional support: RVO:67985840 Keywords : limits of discrete structures * regularity lemma * poset Subject RIV: BA - General Mathematics Impact factor: 1.196, year: 2015 http://www.ams.org/journals/tran/2015-367-06/S0002-9947-2015-06299-0/home.html

  3. Poset limits can be totally ordered

    Czech Academy of Sciences Publication Activity Database

    Hladký, Jan; Máthé, A.; Viresh, P.; Pikhurko, O.

    2015-01-01

    Roč. 367, č. 6 (2015), s. 4319-4337 ISSN 0002-9947 Institutional support: RVO:67985840 Keywords : limits of discrete structures * regularity lemma * poset Subject RIV: BA - General Mathematics Impact factor: 1.196, year: 2015 http://www.ams.org/journals/tran/2015-367-06/S0002-9947-2015-06299-0/ home .html

  4. Remuneration of limited partners with regard to the base for retirement pension

    Directory of Open Access Journals (Sweden)

    Milena Otavová

    2010-01-01

    Full Text Available The papes deals with possible forms of the remuneration of limited partner. There are defined differences between types of his incomes (remuneration such as dividend, remuneration and wage, in relation to czech tax law. With the aid of calculation was determined their combination, both in light of maximum his after-payment-tax income with the inclusion of payments of social and medical insurence, and with respect to computing base for his future retirement pension. The comparison of the forms of the remuneration of limited partner was performed by using the model situations. Mo­dels were configured to represent the possible ways of the remuneration of the partner and also with regard to the social and health insurance. These models highlight the advantages of the different options in terms of the tax burden, partner’s net income and the pension paid in the future. Evalutes haw the forms and amount of incomes influence the amount of the old-age pension. Those models were the basis for the determining the optimum combination of the payment of the profit sharing and the wage of the Partner.

  5. Enhancement of aerobic biodegradation in an oxygen-limiting environment using a saponin-based microbubble suspension

    International Nuclear Information System (INIS)

    Choi, Yong Ju; Kim, Young-Jin; Nam, Kyoungphile

    2009-01-01

    This study investigated the ability of a saponin-based microbubble suspension to enhance aerobic biodegradation of phenanthrene by subsurface delivery. As the microbubble suspension flowed through a sand column pressure buildup and release was repeatedly observed, which delivered oxygen to the less permeable regions. Burkholderia cepacia RPH1, a phenanthrene-degrading bacterium, was mainly transported in a suspended form in the microbubble suspension. When three pore volumes of the microbubble suspension containing B. cepacia RPH1 was introduced into a column contaminated with phenanthrene (100 mg/kg), the oxygen content declined to 5% from an initial value of 20% within 5 days and correspondingly, 34.4% of initial phenanthrene was removed in 8 days. The addition of two further three pore volumes enhanced the biodegradation efficiency by a factor of 2.2. Our data suggest that a saponin-based microbubble suspension could be a potential carrier for enhancing the aerobic biodegradation under an oxygen-limiting environment. - Microbubble suspension can enhance the phenanthrene biodegradation under an oxygen-limiting condition.

  6. Enhancement of aerobic biodegradation in an oxygen-limiting environment using a saponin-based microbubble suspension

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Yong Ju; Kim, Young-Jin [Department of Civil and Environmental Engineering, Seoul National University, Shillim-dong, Gwanak-gu, Seoul (Korea, Republic of); Nam, Kyoungphile, E-mail: kpnam@snu.ac.k [Department of Civil and Environmental Engineering, Seoul National University, Shillim-dong, Gwanak-gu, Seoul (Korea, Republic of)

    2009-08-15

    This study investigated the ability of a saponin-based microbubble suspension to enhance aerobic biodegradation of phenanthrene by subsurface delivery. As the microbubble suspension flowed through a sand column pressure buildup and release was repeatedly observed, which delivered oxygen to the less permeable regions. Burkholderia cepacia RPH1, a phenanthrene-degrading bacterium, was mainly transported in a suspended form in the microbubble suspension. When three pore volumes of the microbubble suspension containing B. cepacia RPH1 was introduced into a column contaminated with phenanthrene (100 mg/kg), the oxygen content declined to 5% from an initial value of 20% within 5 days and correspondingly, 34.4% of initial phenanthrene was removed in 8 days. The addition of two further three pore volumes enhanced the biodegradation efficiency by a factor of 2.2. Our data suggest that a saponin-based microbubble suspension could be a potential carrier for enhancing the aerobic biodegradation under an oxygen-limiting environment. - Microbubble suspension can enhance the phenanthrene biodegradation under an oxygen-limiting condition.

  7. Impact of sensor detection limits on protecting water distribution systems from contamination events

    International Nuclear Information System (INIS)

    McKenna, Sean Andrew; Hart, David Blaine; Yarrington, Lane

    2006-01-01

    Real-time water quality sensors are becoming commonplace in water distribution systems. However, field deployable, contaminant-specific sensors are still in the development stage. As development proceeds, the necessary operating parameters of these sensors must be determined to protect consumers from accidental and malevolent contamination events. This objective can be quantified in several different ways including minimization of: the time necessary to detect a contamination event, the population exposed to contaminated water, the extent of the contamination within the network, and others. We examine the ability of a sensor set to meet these objectives as a function of both the detection limit of the sensors and the number of sensors in the network. A moderately sized distribution network is used as an example and different sized sets of randomly placed sensors are considered. For each combination of a certain number of sensors and a detection limit, the mean values of the different objectives across multiple random sensor placements are calculated. The tradeoff between the necessary detection limit in a sensor and the number of sensors is evaluated. Results show that for the example problem examined here, a sensor detection limit of 0.01 of the average source concentration is adequate for maximum protection. Detection of events is dependent on the detection limit of the sensors, but for those events that are detected, the values of the performance measures are not a function of the sensor detection limit. The results of replacing a single sensor in a network with a sensor having a much lower detection limit show that while this replacement can improve results, the majority of the additional events detected had performance measures of relatively low consequence.

  8. Interference and memory capacity limitations.

    Science.gov (United States)

    Endress, Ansgar D; Szabó, Szilárd

    2017-10-01

    Working memory (WM) is thought to have a fixed and limited capacity. However, the origins of these capacity limitations are debated, and generally attributed to active, attentional processes. Here, we show that the existence of interference among items in memory mathematically guarantees fixed and limited capacity limits under very general conditions, irrespective of any processing assumptions. Assuming that interference (a) increases with the number of interfering items and (b) brings memory performance to chance levels for large numbers of interfering items, capacity limits are a simple function of the relative influence of memorization and interference. In contrast, we show that time-based memory limitations do not lead to fixed memory capacity limitations that are independent of the timing properties of an experiment. We show that interference can mimic both slot-like and continuous resource-like memory limitations, suggesting that these types of memory performance might not be as different as commonly believed. We speculate that slot-like WM limitations might arise from crowding-like phenomena in memory when participants have to retrieve items. Further, based on earlier research on parallel attention and enumeration, we suggest that crowding-like phenomena might be a common reason for the 3 major cognitive capacity limitations. As suggested by Miller (1956) and Cowan (2001), these capacity limitations might arise because of a common reason, even though they likely rely on distinct processes. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  9. Mitigating greenhouse: Limited time, limited options

    International Nuclear Information System (INIS)

    Moriarty, Patrick; Honnery, Damon

    2008-01-01

    Most human-caused climate change comes from fossil fuel combustion emissions. To avoid the risk of serious climate change, very recent research suggests that emission reductions will need to be both large and rapidly implemented. We argue that technical solutions-improving energy efficiency, use of renewable and nuclear energy, and carbon capture and sequestration-can only be of minor importance, mainly given the limited time available to take effective climate action. Only curbing energy use, perhaps through 'social efficiency' gains, particularly in the high-energy consumption countries, can provide the rapid emissions reductions needed. The social efficiency approach requires a basic rethinking in how we can satisfy our human needs with low environmental impacts. Large cuts in emissions could then occur rapidly, but only if resistance to such changes can be overcome. Particularly in transport, there are also serious potential conflicts between the technical and the social efficiency approaches, requiring a choice to be made

  10. Processing considerations with plasma-based ion implantation of polymers: theoretical aspects, limitations, and experimental results

    International Nuclear Information System (INIS)

    Lacoste, A.; Pelletier, J.

    2003-01-01

    Processing of polymers using plasma-based ion implantation techniques (PBII) has general implications in terms of plasma specifications and pulse characteristics. In particular, the different aspects of the processing of polymer layers are discussed as functions of plasma density, pulse duration, and layer characteristics (thickness and permittivity). Clearly, severe limitations (true implantation energy, arcing) may appear for high-density plasmas as well as for long pulse durations, when processing polymer layers with thickness in the mm range. A review of the experimental results of ion implantation in polymeric materials via PBII processing is presented. The experimental results demonstrate the possibility of processing polymer layers with the PBII technique, but with severe limitations resulting from the process itself

  11. Impact of workplace based assessment on doctors' education and performance: a systematic review.

    Science.gov (United States)

    Miller, Alice; Archer, Julian

    2010-09-24

    To investigate the literature for evidence that workplace based assessment affects doctors' education and performance. Systematic review. The primary data sources were the databases Journals@Ovid, Medline, Embase, CINAHL, PsycINFO, and ERIC. Evidence based reviews (Bandolier, Cochrane Library, DARE, HTA Database, and NHS EED) were accessed and searched via the Health Information Resources website. Reference lists of relevant studies and bibliographies of review articles were also searched. Review methods Studies of any design that attempted to evaluate either the educational impact of workplace based assessment, or the effect of workplace based assessment on doctors' performance, were included. Studies were excluded if the sampled population was non-medical or the study was performed with medical students. Review articles, commentaries, and letters were also excluded. The final exclusion criterion was the use of simulated patients or models rather than real life clinical encounters. Sixteen studies were included. Fifteen of these were non-comparative descriptive or observational studies; the other was a randomised controlled trial. Study quality was mixed. Eight studies examined multisource feedback with mixed results; most doctors felt that multisource feedback had educational value, although the evidence for practice change was conflicting. Some junior doctors and surgeons displayed little willingness to change in response to multisource feedback, whereas family physicians might be more prepared to initiate change. Performance changes were more likely to occur when feedback was credible and accurate or when coaching was provided to help subjects identify their strengths and weaknesses. Four studies examined the mini-clinical evaluation exercise, one looked at direct observation of procedural skills, and three were concerned with multiple assessment methods: all these studies reported positive results for the educational impact of workplace based assessment tools

  12. Murder on Grimm Isle: The Impact of Game Narrative Design in an Educational Game-Based Learning Environment

    Science.gov (United States)

    Dickey, Michele D.

    2011-01-01

    The purpose of this research is to investigate the impact of narrative design in a game-based learning environment. Specifically, this investigation focuses the narrative design in an adventure-styled, game-based learning environment for fostering argumentation writing by looking at how the game narrative impacted player/learner (1) intrinsic…

  13. Failure mechanism of resistance-spot-welded specimens impacted on base material by bullets

    Science.gov (United States)

    Fan, Chunlei; Ma, Bohan; Chen, Danian; Wang, Huanran; Ma, Dongfang

    2018-01-01

    The tests of bullet impact on the base material (BM) of a simple specimen with a single resistance-spot-welded (RSW) nugget of TRIP800 steel are performed to investigate the response of the RSW specimen to the ballistic debris impact on the RSW specimen. A one-stage gas gun is used to fire the bullets while a laser velocity interferometer system for any reflector (VISAR) is used to measure the velocity histories of the free surfaces of the RSW specimen. The recovered RSW specimens are examined with the three-dimensional super depth digital microscope (SDDM) and the scanning electro microscope (SEM). For the tests of small multiple-bullet impact, it is revealed that the wave train of the VISAR measured results and the detachment of the base material interfaces in the recovered RSW specimens are directly related to the reflection and refraction of the curved stress waves incoming to the interfaces and the free surfaces in the RSW specimens. The detachment of BM interfaces can lead to the impact failure of the RSW joints for the larger multiple-bullet impact at higher velocity, the mechanism of which is different from the case for normal incidence (spalling). For the tests of single large bullet impact, it is brought to light experimentally that the plastic strain concentration at the "notch tip" spurs either the crack near the RSW joint or the split of the nugget. The numerical simulation shows up the process of splitting the nugget: a crack initiates at the "notch tip", propagates across the nugget interface and splits the nugget into two parts. It is indicated that the interaction between the stress waves and many interfaces/free surfaces in the RSW specimen under ballistic impact causes variable local stress triaxialities and stress Lode angles, which affects the deformation and fracture mechanism of the RSW specimen including stretching and shearing failure. It is shown that the impact failure of the RSW joints is a mixture of brittle fracture and ductile

  14. Performance limitations of polymer electrolytes based on ethylene oxide polymers

    International Nuclear Information System (INIS)

    Buriez, Olivier; Han, Yong Bong; Hou, Jun; Kerr, John B.; Qiao, Jun; Sloop, Steven E.; Tian, Minmin; Wang, Shanger

    1999-01-01

    Studies of polymer electrolyte solutions for lithium-polymer batteries are described. Two different salts, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and lithium trifluoromethanesulfonate (LiTf), were dissolved in a variety of polymers. The structures were all based upon the ethylene oxide unit for lithium ion solvation and both linear and comb-branch polymer architectures have been examined. Conductivity, salt diffusion coefficient and transference number measurements demonstrate the superior transport properties of the LiTFSI salt over LiTf. Data obtained on all of these polymers combined with LiTFSI salts suggest that there is a limit to the conductivity achievable at room temperature, at least for hosts containing ethylene oxide units. The apparent conductivity limit is 5 x 10-5 S/cm at 25 C. Providing that the polymer chain segment containing the ethylene oxide units is at least 5-6 units long there appears to be little influence of the polymer framework to which the solvating groups are attached. To provide adequate separator function, the mechanical properties may be disconnected from the transport properties by selection of an appropriate architecture combined with an adequately long ethylene oxide chain. For both bulk and interfacial transport of the lithium ions, conductivity data alone is insufficient to understand the processes that occur. Lithium ion transference numbers and salt diffusion coefficients also play a major role in the observed behavior and the transport properties of these polymer electrolyte solutions appear to be quite inadequate for ambient temperature performance. At present, this restricts the use of such systems to high temperature applications. Several suggestions are given to overcome these obstacles

  15. The Impact of a Mindfulness Based Program on Perceived Stress, Anxiety, Depression and Sleep of Incarcerated Women

    Directory of Open Access Journals (Sweden)

    Ginette G. Ferszt

    2015-09-01

    Full Text Available Incarcerated women enter the prison setting with remarkable histories of trauma, mental health and substance abuse issues. Given the stress of incarceration and separation from their children, families, and significant others, it is not surprising that many women experience increased anxiety, depression, and problems with sleep. Due to these negative outcomes, it is imperative to find efficient non-pharmacological interventions. This pilot study examined the impact of a 12-week mindfulness based program on the stress, anxiety, depression and sleep of women with a total of 33 completing the study. In one group, women’s perceived stress, anxiety and depression were all significantly lower following the intervention compared to prior to the intervention. Challenges with implementing the pilot study are addressed. Despite challenges and limitations, the low-cost non-pharmacological intervention has potential for a reducing the symptoms of anxiety and depression.

  16. Impact of leadership qualities on employee commitment in multi-project-based organizations

    Science.gov (United States)

    Waris, M.; Khan, A.; Ismail, I.; Adeleke, A. Q.; Panigrahi, S.

    2018-04-01

    The purpose of this study is to investigate the impact of multiple leadership qualities (MLQ) on employee commitment in multi-project-based organizsations. The dimensions of leadership qualities develop a healthy organizational environment which will lead to job satisfaction and, ultimately, job commitment. MLQ inspire the subordinates, as collective in nature, to get extra ordinary goals in the hyper competitive era. The main objective of this research is two fold ; firstly, to find out the impact of MLQ on employee job affectiveness and calculative commitment and secondly, to investigate the extent of the impact of MLQ on organizations. A total of 213 respondents were included in the study from different organizations. The data were analyzed through regression analysis by using the SPSS. The finding shows that all of the variables have a positive correlation with each other. The correlation of MLQ and employee job commitment was also found to be significant, which shows that MLQ have an impact on the organizations. Conceptual framework of the study is developed as MLQ an independent variables and its impact has been examined on the Employee Job Commitment. The results supported the hypothesis that MLQ have a positive and significant impact on employee job commitment.

  17. Evaluation of Monticello Nuclear Power Plant, Environmental Impact Prediction, based on monitoring programs

    International Nuclear Information System (INIS)

    Gore, K.L.; Thomas, J.M.; Kannberg, L.D.; Watson, D.G.

    1976-11-01

    This report evaluates quantitatively the nonradiological environmental monitoring programs at Monticello Nuclear Generating Plant. The general objective of the study is to assess the effectiveness of monitoring programs in the measurement of environmental impacts. Specific objectives include the following: (1) Assess the validity of environmental impact predictions made in the Environmental Statement by analysis of nonradiological monitoring data; (2) evaluate the general adequacy of environmental monitoring programs for detecting impacts and their responsiveness to Technical Specifications objectives; (3) assess the adequacy of preoperational monitoring programs in providing a sufficient data base for evaluating operational impacts; (4) identify possible impacts that were not predicted in the environmental statement and identify monitoring activities that need to be added, modified or deleted; and (5) assist in identifying environmental impacts, monitoring methods, and measurement problems that need additional research before quantitative predictions can be attempted. Preoperational as well as operational monitoring data were examined to test the usefulness of baseline information in evaluating impacts. This included an examination of the analytical methods used to measure ecological and physical parameters, and an assessment of sampling periodicity and sensitivity where appropriate data were available

  18. Vehicle Maximum Weight Limitation Based on Intelligent Weight Sensor

    Science.gov (United States)

    Raihan, W.; Tessar, R. M.; Ernest, C. O. S.; E Byan, W. R.; Winda, A.

    2017-03-01

    Vehicle weight is an important factor to be maintained for transportation safety. A weight limitation system is proposed to make sure the vehicle weight is always below its designation prior the vehicle is being used by the driver. The proposed system is divided into two systems, namely vehicle weight confirmation system and weight warning system. In vehicle weight confirmation system, the weight sensor work for the first time after the ignition switch is turned on. When the weight is under the weight limit, the starter engine can be switched on to start the engine system, otherwise it will be locked. The seconds system, will operated after checking all the door at close position, once the door of the car is closed, the weight warning system will check once again the weight during runing engine condition. The results of these two systems, vehicle weight confirmation system and weight warning system have 100 % accuracy, respectively. These show that the proposed vehicle weight limitation system operate well.

  19. Criterial noise effects on rule-based category learning: the impact of delayed feedback.

    Science.gov (United States)

    Ell, Shawn W; Ing, A David; Maddox, W Todd

    2009-08-01

    Variability in the representation of the decision criterion is assumed in many category-learning models, yet few studies have directly examined its impact. On each trial, criterial noise should result in drift in the criterion and will negatively impact categorization accuracy, particularly in rule-based categorization tasks, where learning depends on the maintenance and manipulation of decision criteria. In three experiments, we tested this hypothesis and examined the impact of working memory on slowing the drift rate. In Experiment 1, we examined the effect of drift by inserting a 5-sec delay between the categorization response and the delivery of corrective feedback, and working memory demand was manipulated by varying the number of decision criteria to be learned. Delayed feedback adversely affected performance, but only when working memory demand was high. In Experiment 2, we built on a classic finding in the absolute identification literature and demonstrated that distributing the criteria across multiple dimensions decreases the impact of drift during the delay. In Experiment 3, we confirmed that the effect of drift during the delay is moderated by working memory. These results provide important insights into the interplay between criterial noise and working memory, as well as providing important constraints for models of rule-based category learning.

  20. Transmission of drug resistant HIV and its potential impact on mortality and treatment outcomes in resource-limited settings

    DEFF Research Database (Denmark)

    Cambiano, Valentina; Bertagnolio, Silvia; Jordan, Michael R

    2013-01-01

    is the most cost-effective. Mathematical models can contribute to answer these questions. In order to estimate the potential long-term impact of TDR on mortality in people on ART we used the Synthesis transmission model. TDR is predicted to have potentially significant impact on future HIV mortality...... periods of unrecognized viral failure, during which drug-resistant virus can be transmitted and this could compromise the long-term effectiveness of currently available first-line regimens. In response to this concern, the World Health Organization recommends population-based surveys to detect whether...... the prevalence of resistance in ART-naive people is reaching alerting levels. Whereas adherence counseling has to be an integral component of any treatment program, it is still unclear which threshold of transmitted drug resistance (TDR) should trigger additional targeted public health actions and which action...

  1. Beyond the rhetoric of problem-based learning: emancipatory limits and links with andragogy.

    Science.gov (United States)

    Milligan, F

    1999-10-01

    Problem-based learning (PBL), sometimes referred to as enquiry-based learning, is an approach to education that has gained increasing usage within health care in recent years. Its origins very much lie within medical education. The bulk of literature on PBL is optimistic about its potential, especially in relation to nurse education. It is argued here that the benefits of PBL are that it moves toward student-centred education and process-oriented methods that have been taking place for at least 16 years. There are clear links with andragogy although this is not always acknowledged, but the potential move away from emancipatory education inherent in PBL if used without reflection, is inconsistent with andragogy. This article takes a more critical view of the concept and argues that there are significant limits which need to be considered carefully. Apart from the possible move away from the emancipatory aims of education, there is commonly an implicit support of the medical model within PBL which is inappropriate at a time when the limits of medicine are becoming increasingly clear. It is concluded that further debate and research on the approach is necessary, but that as a facilitative strategy PBL does hold some promise. However, it would be inappropriate to use it as a curriculum model if only because it lacks the diversity required of a postmodern curriculum and would not respond effectively to differing student learning styles.

  2. Impacts of Art Museum-Based Dementia Programming on Participating Care Partners

    Science.gov (United States)

    Lamar, Katherine L.; Luke, Jessica J.

    2016-01-01

    The purpose of this study was to describe the impacts of art museum-based dementia programming on participating care partners (CPs). Data were collected through telephone interviews with 29 caregivers who participated in one of three dementia programs: "here: now" at The Frye Art Museum, Seattle; "Meaningful Moments" at the…

  3. Quantity and quality limit detritivore growth: mechanisms revealed by ecological stoichiometry and co-limitation theory.

    Science.gov (United States)

    Halvorson, Halvor M; Sperfeld, Erik; Evans-White, Michelle A

    2017-12-01

    Resource quantity and quality are fundamental bottom-up constraints on consumers. Best understood in autotroph-based systems, co-occurrence of these constraints may be common but remains poorly studied in detrital-based systems. Here, we used a laboratory growth experiment to test limitation of the detritivorous caddisfly larvae Pycnopsyche lepida across a concurrent gradient of oak litter quantity (food supply) and quality (phosphorus : carbon [P:C ratios]). Growth increased simultaneously with quantity and quality, indicating co-limitation across the resource gradients. We merged approaches of ecological stoichiometry and co-limitation theory, showing how co-limitation reflected shifts in C and P acquisition throughout homeostatic regulation. Increased growth was best explained by elevated consumption rates and improved P assimilation, which both increased with elevated quantity and quality. Notably, C assimilation efficiencies remained unchanged and achieved maximum 18% at low quantity despite pronounced C limitation. Detrital C recalcitrance and substantive post-assimilatory C losses probably set a minimum quantity threshold to achieve positive C balance. Above this threshold, greater quality enhanced larval growth probably by improving P assimilation toward P-intensive growth. We suggest this interplay of C and P acquisition contributes to detritivore co-limitation, highlighting quantity and quality as potential simultaneous bottom-up controls in detrital-based ecosystems, including under anthropogenic change like nutrient enrichment. © 2017 by the Ecological Society of America.

  4. Periodic Forcing of a 555-IC Based Electronic Oscillator in the Strong Coupling Limit

    Science.gov (United States)

    Santillán, Moisés

    We designed and developed a master-slave electronic oscillatory system (based on the 555-timer IC working in the astable mode), and investigated its dynamic behavior regarding synchronization. For that purpose, we measured the rotation numbers corresponding to the phase-locking rhythms achieved in a large set of values of the normalized forcing frequency (NFF) and of the coupling strength between the master and the slave oscillators. In particular, we were interested in the system behavior in the strong-coupling limit, because such problem has not been extensively studied from an experimental perspective. Our results indicate that, in such a limit, a degenerate codimension-2 bifurcation point at NFF = 2 exists, in which all the phase-locking regions converge. These findings were corroborated by means of a mathematical model developed to that end, as well as by ad hoc further experiments.

  5. Head Impact Biomechanics in Women's College Soccer.

    Science.gov (United States)

    Lynall, Robert C; Clark, Michael D; Grand, Erin E; Stucker, Jaclyn C; Littleton, Ashley C; Aguilar, Alain J; Petschauer, Meredith A; Teel, Elizabeth F; Mihalik, Jason P

    2016-09-01

    There are limited nonlaboratory soccer head impact biomechanics data. This is surprising given soccer's global popularity. Epidemiological data suggest that female college soccer players are at a greater concussion injury risk than their male counterparts. Therefore, the purposes of our study were to quantify head impact frequency and magnitude during women's soccer practices and games in the National Collegiate Athletic Association and to characterize these data across event type, playing position, year on the team, and segment of game (first and second halves). Head impact biomechanics were collected from female college soccer players (n = 22; mean ± SD age = 19.1 ± 0.1 yr, height = 168.0 ± 3.5 cm, mass = 63.7 ± 6.0 kg). We employed a helmetless head impact measurement device (X2 Biosystems xPatch) before each competition and practice across a single season. Peak linear and rotational accelerations were categorized based on impact magnitude and subsequently analyzed using appropriate nonparametric analyses. Overall, women's college soccer players experience approximately seven impacts per 90 min of game play. The overwhelming majority (~90%) of all head impacts were categorized into our mildest linear acceleration impact classification (10g-20g). Interestingly, a higher percentage of practice impacts in the 20g-40g range compared with games (11% vs 7%) was observed. Head impact biomechanics studies have provided valuable insights into understanding collision sports and for informing evidence-based rule and policy changes. These have included changing the football kickoff, ice hockey body checking ages, and head-to-head hits in both sports. Given soccer's global popularity, and the growing public concern for the potential long-term neurological implications of collision and contact sports, studying soccer has the potential to impact many athletes and the sports medicine professionals caring for them.

  6. Development of slew-rate-limited time-over-threshold (ToT) ASIC for a multi-channel silicon-based ion detector

    Science.gov (United States)

    Uenomachi, M.; Orita, T.; Shimazoe, K.; Takahashi, H.; Ikeda, H.; Tsujita, K.; Sekiba, D.

    2018-01-01

    High-resolution Elastic Recoil Detection Analysis (HERDA), which consists of a 90o sector magnetic spectrometer and a position-sensitive detector (PSD), is a method of quantitative hydrogen analysis. In order to increase sensitivity, a HERDA system using a multi-channel silicon-based ion detector has been developed. Here, as a parallel and fast readout circuit from a multi-channel silicon-based ion detector, a slew-rate-limited time-over-threshold (ToT) application-specific integrated circuit (ASIC) was designed, and a new slew-rate-limited ToT method is proposed. The designed ASIC has 48 channels and each channel consists of a preamplifier, a slew-rate-limited shaping amplifier, which makes ToT response linear, and a comparator. The measured equivalent noise charges (ENCs) of the preamplifier, the shaper, and the ToT on no detector capacitance were 253±21, 343±46, and 560±56 electrons RMS, respectively. The spectra from a 241Am source measured using a slew-rate-limited ToT ASIC are also reported.

  7. A single photon emission computed tomograph based on a limited dumber of detectors for fluid flow visualization

    International Nuclear Information System (INIS)

    Legoupil, S.

    1999-01-01

    We present in this work a method for fluid flow visualization in a system using radioactive tracers. The method is based on single photon emission computed tomography techniques, applied to a limited number of discrete detectors. We propose in this work a method for the estimation of the transport matrix of photons, associated to the acquisition system. This method is based on the modelization of profiles acquired for a set of point sources located in the imaged volume. Monte Carlo simulations allow to separate scattered photons from those directly collected by the system. The influence of the energy tracer is exposed. The reconstruction method is based on the maximum likelihood - expectation maximization algorithm. An experimental device, based on 36 detectors was realised for the visualization of water circulation in a vessel. A video monitoring allows to visualize the dye water tracer. Dye and radioactive tracers are injected simultaneously in a water flow circulating in the vessel. Reconstructed and video images are compared. Quantitative and qualitative analysis show that fluid flow visualization is feasible with a limited number of detectors. This method can be applied for system involving circulations of fluids. (author)

  8. 40 CFR 130.7 - Total maximum daily loads (TMDL) and individual water quality-based effluent limitations.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Total maximum daily loads (TMDL) and individual water quality-based effluent limitations. 130.7 Section 130.7 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY PLANNING AND MANAGEMENT § 130.7 Total...

  9. Evaluating international development investments based on ecosystem services impact

    Science.gov (United States)

    Fremier, A. K.; Brauman, K. A.; Mulligan, M.; Chaplin-Kramer, R.; Gordon, L.; Luedeling, E.; Jones, S. K.; DeClerck, F.

    2016-12-01

    Engineered water-control structures to supply water for agriculture are frequently funded by international development to an effort to improve human wellbeing. Dams, reservoirs, and other forms of water control frequently have negative impacts on other water users; however, their sustainability in the face of climate change and evolving watershed processes have been called into question. Increasingly, planning for and evaluation of investments in water control require integration of these larger scale impacts and dependencies. Ecosystem service approaches can use local to regional scale knowledge to integrate a broader scope of project impacts by quantifying trade-offs in multiple services across proposed development interventions and future scenarios (economic, climate, demographic). Here, we illustrate the role an ecosystem service approach can play in investment decision making to evaluate the impact of small reservoirs on human wellbeing in the Upper Volta Basin of West Africa. Our project has four components: (1) design of a spatially explicit regional-level social-ecological characterization; (2) construction of future scenario analyses for rainfed and irrigated production system interventions; (3) co-design and co-development of benefit sharing mechanisms at the reservoir catchment level and enhancing institutional capacity to implement these mechanisms through training, professional development and targeting tools; and (4) intervention decision analysis to identify benefits, costs and risks associated with decision options. We illustrate how this approach highlights different outcomes than standard cost-benefit analysis focused narrowly on the single project. Anticipated outcomes are development of ecosystem services-based methods for more equitably and sustainably evaluating development interventions and identifying management approaches to water-impoundment structures that promote a range of ecosystem services to provide food security to a broader

  10. MODELLING OF CONCENTRATION LIMITS BASED ON NEURAL NETWORKS.

    Directory of Open Access Journals (Sweden)

    A. L. Osipov

    2017-02-01

    Full Text Available We study the forecasting model with the concentration limits is-the use of neural network technology. The software for the implementation of these models. It is shown that the efficiency of the system in the experimental material.

  11. The Impact of Heterogeneity on Threshold-Limited Social Contagion, and on Crowd Decision-Making

    Science.gov (United States)

    Karampourniotis, Panagiotis Dimitrios

    Recent global events and their poor predictability are often attributed to the complexity of the world event dynamics. A key factor generating the turbulence is human diversity. Here, we study the impact of heterogeneity of individuals on opinion formation and emergence of global biases. In the case of opinion formation, we focus on the heterogeneity of individuals' susceptibility to new ideas. In the case of global biases, we focus on the aggregated heterogeneity of individuals in a country. First, to capture the complex nature of social influencing we use a simple but classic model of contagion spreading in complex social systems, namely the threshold model. We investigate numerically and analytically the transition in the behavior of threshold-limited cascades in the presence of multiple initiators as the distribution of thresholds is varied between the two extreme cases of identical thresholds and a uniform distribution. We show that individuals' heterogeneity of susceptibility governs the dynamics, resulting in different sizes of initiators needed for consensus. Furthermore, given the impact of heterogeneity on the cascade dynamics, we investigate selection strategies for accelerating consensus. To this end, we introduce two new selection strategies for Influence Maximization. One of them focuses on finding the balance between targeting nodes which have high resistance to adoptions versus nodes positioned in central spots in networks. The second strategy focuses on the combination of nodes for reaching consensus, by targeting nodes which increase the group's influence. Our strategies outperform other existing strategies regardless of the susceptibility diversity and network degree assortativity. Finally, we study the aggregated biases of humans in a global setting. The emergence of technology and globalization gives raise to the debate on whether the world moves towards becoming flat, a world where preferential attachment does not govern economic growth. By

  12. The impact of an ostomy on older colorectal cancer patients: a cross-sectional survey.

    Science.gov (United States)

    Verweij, N M; Hamaker, M E; Zimmerman, D D E; van Loon, Y T; van den Bos, F; Pronk, A; Borel Rinkes, I H M; Schiphorst, A H W

    2017-01-01

    Ostomies are being placed in 35 % of patients after colorectal cancer surgery. As decision-making regarding colorectal surgery is challenging in the older patients, it is important to have insight in the potential impact due to ostomies. An internet-based survey was sent to all members with registered email addresses of the Dutch Ostomy Patient Association. The response rate was 49 %; 932 cases were included of whom 526 were aged Ostomy-related limitations were similar in the different age groups, just as uncertainty (8-10 %) and dependency (18-22 %) due to the ostomy. A reduced quality of life was experienced least in the oldest old group (24 % vs 37 % of the elderly and 46 % of the younger respondents, p ostomy was observed. Older ostomates do not experience more limitations or psychosocial impact due to the ostomy compared to their younger counterparts. Over the years, impact becomes less distinct. Treatment decision-making is challenging in the older colorectal cancer patients but ostomy placement should not be withheld based on age alone.

  13. IMPACT2C: Quantifying projected impacts under 2°C warming

    Science.gov (United States)

    Jacob, D.; Kotova, L.; Impact2C Team

    2012-04-01

    Political discussions on the European goal to limit global warming to 2°C demand, that information is provided to society by the best available science on projected impacts and possible benefits. The new project IMPACT2C is supported by the European Commission's 7th Framework Programme as a 4 year large-scale integrating project. IMPACT2C is coordinated by the Climate Service Center, Helmholtz-Zentrum Geesthacht. IMPACT2C enhances knowledge, quantifies climate change impacts, and adopts a clear and logical structure, with climate and impacts modelling, vulnerabilities, risks and economic costs, as well as potential responses, within a pan-European sector based analysis. The project utilises a range of models within a multi-disciplinary international expert team and assesses effects on water, energy, infrastructure, coasts, tourism, forestry, agriculture, ecosystems services, and health and air quality-climate interactions. IMPACT2C introduces key innovations. First, harmonised socio-economic assumptions/scenarios will be used, to ensure that both individual and cross-sector assessments are aligned to the 2°C (1.5°C) scenario for both impacts and adaptation, e.g. in relation to land-use pressures between agriculture and forestry. Second, it has a core theme of uncertainty, and will develop a methodological framework integrating the uncertainties within and across the different sectors, in a consistent way. In so doing, analysis of adaptation responses under uncertainty will be enhanced. Finally, a cross-sectoral perspective is adopted to complement the sector analysis. A number of case studies will be developed for particularly vulnerable areas, subject to multiple impacts (e.g. the Mediterranean), with the focus being on cross-sectoral interactions (e.g. land use competition) and cross-cutting themes (e.g. cities). The project also assesses climate change impacts in some of the world's most vulnerable regions: Bangladesh, Africa (Nile and Niger basins), and the

  14. The indirect costs and benefits of greenhouse gas limitations

    Energy Technology Data Exchange (ETDEWEB)

    Markandya, A

    1999-12-31

    The purpose of this report is to evaluate GHG limitation issues in a broader context. This includes the impacts of projects on vulnerable groups, the impacts on the environment more generally and the impacts on sustainability in a wider sense. It also offers some advice on how a decision-making framework can bring together these different dimensions. The structure of the guidelines is as follows. Section 2 introduces essential cost concepts and discusses the adjustments needed to the financial costs of different components, to arrive at the true economic costs. Section 3 looks at the macro-economic impacts of different GHG limitation project/policies. Section 4 discusses the way in which the sustainability concerns of such projects/policies can be monitored. Section 5 brings these different components together and looks at different methods of project selection. Section 6 provides a basic framework of impacts that are likely to arise in different GHG-related projects/policies, and what kind of method of estimation is available for these different impacts. Sections 7 to 9 go into greater depth on specific impacts. Sections 7 and 8 look at the employment and distributional effects respectively, and how they might be estimated. Section 9 evaluates the benefits in terms of changes in environmental damage resulting from GHG projects/policies. Section 10 provides three case studies in which the methods outlined in the report are applied. These case studies consider a biogas plant in Tanzania, a forestry project in the Russian Federation, and an energy efficiency project in Thailand. Section 11 concludes the report. (au) 59 refs.

  15. The indirect costs and benefits of greenhouse gas limitations

    Energy Technology Data Exchange (ETDEWEB)

    Markandya, A.

    1998-12-31

    The purpose of this report is to evaluate GHG limitation issues in a broader context. This includes the impacts of projects on vulnerable groups, the impacts on the environment more generally and the impacts on sustainability in a wider sense. It also offers some advice on how a decision-making framework can bring together these different dimensions. The structure of the guidelines is as follows. Section 2 introduces essential cost concepts and discusses the adjustments needed to the financial costs of different components, to arrive at the true economic costs. Section 3 looks at the macro-economic impacts of different GHG limitation project/policies. Section 4 discusses the way in which the sustainability concerns of such projects/policies can be monitored. Section 5 brings these different components together and looks at different methods of project selection. Section 6 provides a basic framework of impacts that are likely to arise in different GHG-related projects/policies, and what kind of method of estimation is available for these different impacts. Sections 7 to 9 go into greater depth on specific impacts. Sections 7 and 8 look at the employment and distributional effects respectively, and how they might be estimated. Section 9 evaluates the benefits in terms of changes in environmental damage resulting from GHG projects/policies. Section 10 provides three case studies in which the methods outlined in the report are applied. These case studies consider a biogas plant in Tanzania, a forestry project in the Russian Federation, and an energy efficiency project in Thailand. Section 11 concludes the report. (au) 59 refs.

  16. Impact of a Probiotic-Based Cleaning Intervention on the Microbiota Ecosystem of the Hospital Surfaces: Focus on the Resistome Remodulation.

    Directory of Open Access Journals (Sweden)

    Elisabetta Caselli

    Full Text Available Contamination of hospital surfaces by clinically-relevant pathogens represents a major concern in healthcare facilities, due to its impact on transmission of healthcare-associated infections (HAIs and to the growing drug resistance of HAI-associated pathogens. Routinely used chemical disinfectants show limitations in controlling pathogen contamination, due to their inefficacy in preventing recontamination and selection of resistant strains. Recently we observed that an innovative approach, based on a cleanser added with spores of non-pathogenic probiotic Bacilli, was effective in stably counteracting the growth of several pathogens contaminating hospital surfaces.Here, we wanted to study the impact of the Bacillus-based cleanser on the drug-resistance features of the healthcare pathogens population. In parallel, the ability of cleanser-derived Bacilli to infect hospitalized patients was also investigated.Collected data showed that Bacilli spores can germinate on dry inanimate surfaces, generating the bacterial vegetative forms which counteract the growth of pathogens and effectively substitute for them on treated surfaces. Strikingly, this procedure did not select resistant species, but conversely induced an evident decrease of antibiotic resistance genes in the contaminating microbial population. Also importantly, all the six HAI-positive patients hosted in the treated areas resulted negative for probiotic Bacilli, thus adding evidences to their safety-to-use.These results indicate that this probiotic-based procedure is active not only in controlling surface microbial contamination but also in lowering drug-resistant species, suggesting that it may have relevant clinical and therapeutical implications for the management of HAIs.

  17. Assessing the Suitability and Limitations of Satellite-based Measurements for Estimating CO, CO2, NO2 and O3 Concentrations over the Niger Delta

    Science.gov (United States)

    Fagbeja, M. A.; Hill, J. L.; Chatterton, T. J.; Longhurst, J. W.; Akinyede, J. O.

    2011-12-01

    Space-based satellite sensor technology may provide important tools in the study and assessment of national, regional and local air pollution. However, the application of optical satellite sensor observation of atmospheric trace gases, including those considered to be 'air pollutants', within the lower latitudes is limited due to prevailing climatic conditions. The lack of appropriate air pollution ground monitoring stations within the tropical belt reduces the ability to verify and calibrate space-based measurements. This paper considers the suitability of satellite remotely sensed data in estimating concentrations of atmospheric trace gases in view of the prevailing climate over the Niger Delta region. The methodological approach involved identifying suitable satellite data products and using the ArcGIS Geostatistical Analyst kriging interpolation technique to generate surface concentrations from satellite column measurements. The observed results are considered in the context of the climate of the study area. Using data from January 2001 to December 2005, an assessment of the suitability of satellite sensor data to interpolate column concentrations of trace gases over the Niger Delta has been undertaken and indicates varying degrees of reliability. The level of reliability of the interpolated surfaces is predicated on the number and spatial distributions of column measurements. Accounting for the two climatic seasons in the region, the interpolation of total column concentrations of CO and CO2 from SCIAMACHY produced both reliable and unreliable results over inland parts of the region during the dry season, while mainly unreliable results are observed over the coastal parts especially during the rainy season due to inadequate column measurements. The interpolation of tropospheric measurements of NO2 and O3 from GOME and OMI respectively produced reliable results all year. This is thought to be due to the spatial distribution of available column measurements

  18. The Impact of Situation-Based Learning to Students’ Quantitative Literacy

    Science.gov (United States)

    Latifah, T.; Cahya, E.; Suhendra

    2017-09-01

    Nowadays, the usage of quantities can be seen almost everywhere. There has been an increase of quantitative thinking, such as quantitative reasoning and quantitative literacy, within the context of daily life. However, many people today are still not fully equipped with the knowledge of quantitative thinking. There are still a lot of individuals not having enough quantitative skills to perform well within today’s society. Based on this issue, the research aims to improve students’ quantitative literacy in junior high school. The qualitative analysis of written student work and video observations during the experiment reveal that the impact of situation-based learning affects students’ quantitative literacy.

  19. Over 600 mobile base station measurements in Buenos Aires City, how far are general public limits?

    International Nuclear Information System (INIS)

    Aguirre, Anibal; Dalmas Di Giovanni, Norberto; Garcia Diaz, Javier; Douthat, Analia; Munoz, Claudio; Saint Nom, Roxana

    2008-01-01

    Full text: The general public worries about non ionizing radiation (NIR), produced by mobile base station aren't new, mainly in big cities like Buenos Aires where the amount of antennas of wide communication services (mobile, data links, FM Broadcasting, TV and others), are so considerable. Buenos Aires City has 3 million inhabitants in a surface of 203 km 2 and has about 700 mobile base stations between macro and micro cells. When public demand arrived to local government authorities, the first logical step was to promote a big measurement campaign to do a radiation map of the city. This measurement campaign has been done for two measurement teams, one with CITEFA NIR specialists and the other with ITBA NIR specialists, during 6 months. Local NRI measurement guidelines established that has to be taken between 12 and 16 points around NRI source in a 50 m or 100 m radius, depending on the neighbourhood buildings features (buildings located in the centre of the city aren't the same as a quiet house district). The obtained measured values had to be compared with Argentinean exposure limits, which are the same that ICNIRP limits. With over 7500 measured points in the entire city with wide band instruments (200 kHz-40 GHz), we have started our analysis. This information has been used by local authorities to upgrade a radiation map that can be consulted on the local government internet site. We have compared the obtained values with some international general public exposure limits. From this comparison we found that over 90% of measured points were under general public ICNIRP cell phone frequency limits, but the surprise was that, about 80% of them were below Russian limits (6 V/m) that are the strictest of the world. According to the obtained results and to provide a conclusion we could say that, if in a big city with a very high NIR sources density, we find a majority of lower limits values, this situation will be better in a little town with few NIR sources. However

  20. Studying the Safety Impact of Autonomous Vehicles Using Simulation-Based Surrogate Safety Measures

    OpenAIRE

    Morando, Mark Mario; Tian, Qingyun; Truong, Long T.; Vu, Hai L.

    2018-01-01

    Autonomous vehicle (AV) technology has advanced rapidly in recent years with some automated features already available in vehicles on the market. AVs are expected to reduce traffic crashes as the majority of crashes are related to driver errors, fatigue, alcohol, or drugs. However, very little research has been conducted to estimate the safety impact of AVs. This paper aims to investigate the safety impacts of AVs using a simulation-based surrogate safety measure approach. To this end, safety...

  1. Sustainable Development Impacts of NAMAs: An integrated approach to assessment of co-benefits based on experience with the CDM

    DEFF Research Database (Denmark)

    Olsen, Karen Holm

    to assess the SD impacts of NAMAs. This paper argues for a new integrated approach to asses NAMAs' SD impacts that consists of SD indicators, procedures for stakeholder involvement and safeguards against negative impacts. The argument is based on a review of experience with the CDM’s contribution to SD...... and a comparison of similarities and differences between NAMAs and CDM. Five elements of a new approach towards assessment of NAMAs SD impacts are suggested based on emerging approaches and methodologies for monitoring, reporting and verification (MRV) of greenhouse gas reductions and SD impacts of NAMAs....

  2. Possibilities and limitations for sustainable bioenergy production systems

    International Nuclear Information System (INIS)

    Smeets, Edward Martinus Wilhelmus Utrecht University

    2008-05-01

    The main objective of this thesis is to investigate the possibilities and limitations of sustainable bioenergy production. To this end, the following research questions have been formulated: (1). What is the potential of different world regions to produce biomass for energy generation in the year 2050, taking account of biological and climatological limitations, the use of biomass to produce food, materials and traditional bioenergy, as well as the need to maintain existing forests and thus protect biodiversity?; (2) What are the main bottlenecks to formulating and implementing sustainability criteria for bioenergy production?; (3) To what extent does complying with sustainability criteria have impacts on the costs and potential of bioenergy production?; (4) To what extent do fertilizer- and manure-induced nitrous oxide (N2O) emissions due to energy crop production have an impact on the reduction of greenhouse gas (GHG) emissions when conventional transportation fuels are replaced by first-generation biofuels?; (5) In terms of economic and environmental performance, how does Europe's production, storage and transport of miscanthus and switchgrass in 2004 compare to that in 2030? Throughout this thesis, specific attention is paid to knowledge gaps and their potential impact on results, the aim being to identify priorities for future research and development. Another key element of our research is that we evaluate the possibilities and limitations of strategies that are designed to improve the performance of bioenergy production systems and that may be incorporated in bioenergy certification schemes and bioenergy promoting policies

  3. The utilization of research-based information: Moving beyond communicating assessments of (climate) impacts

    Science.gov (United States)

    Pulwarty, R.; Cohen, S. J.

    2006-12-01

    Societal impacts of changing environments include primary or direct effects (increased soil moisture, loss of life, crop and building damage etc.), secondary or indirect effects (displacement, illness) and, higher order or systemic effects (debt, loss of livelihood). Vulnerability to such events is constructed from: (1) the timing, magnitude, spatial extent, and duration of the physical hazard i.e. risk of occurrence; (2) exposure in regions of risk e.g. population, property; and, (3) factors that pre-condition the degree of impact and the capacity to respond and recover. The call for better articulated decision support and services components is rising on par with more traditional axes of assessments i.e. characterizing the integrated physical system and its social and environmental impacts. The expectation is that increasing the rate at which policy makers and resource managers acquire knowledge about environment-society interactions will result in improvements in the quality of public and private decisions (a decidedly idealized view). Much recent work has shown that this expectation is most difficult to meet when decision stakes are high, uncertainty is great, technologies are new, experience is limited, and there are unequal distributions of burdens and benefits. We review generalized frames of reference on the use of climate information identified in independent studies undertaken by the authors in different river basins of North America. As shown in these (and other) studies, researchers, policy-makers and practitioners (public and private) operate on different time-lines, use different languages, and most importantly respond to different problem definitions and accountability incentives. The process of communication is increasingly recognized to be complex, transactional, and heavily dependent on the potential user's pre-existing knowledge, beliefs and experiences. We outline differing approaches to risk communication and their associated assumptions

  4. Graph-based impact analysis as a framework for incorporating practitioner knowledge in dairy herd health management.

    Science.gov (United States)

    Krieger, M; Schwabenbauer, E-M; Hoischen-Taubner, S; Emanuelson, U; Sundrum, A

    2018-03-01

    Production diseases in dairy cows are multifactorial, which means they emerge from complex interactions between many different farm variables. Variables with a large impact on production diseases can be identified for groups of farms using statistical models, but these methods cannot be used to identify highly influential variables in individual farms. This, however, is necessary for herd health planning, because farm conditions and associated health problems vary largely between farms. The aim of this study was to rank variables according to their anticipated effect on production diseases on the farm level by applying a graph-based impact analysis on 192 European organic dairy farms. Direct impacts between 13 pre-defined variables were estimated for each farm during a round-table discussion attended by practitioners, that is farmer, veterinarian and herd advisor. Indirect impacts were elaborated through graph analysis taking into account impact strengths. Across farms, factors supposedly exerting the most influence on production diseases were 'feeding', 'hygiene' and 'treatment' (direct impacts), as well as 'knowledge and skills' and 'herd health monitoring' (indirect impacts). Factors strongly influenced by production diseases were 'milk performance', 'financial resources' and 'labour capacity' (directly and indirectly). Ranking of variables on the farm level revealed considerable differences between farms in terms of their most influential and most influenced farm factors. Consequently, very different strategies may be required to reduce production diseases in these farms. The method is based on perceptions and estimations and thus prone to errors. From our point of view, however, this weakness is clearly outweighed by the ability to assess and to analyse farm-specific relationships and thus to complement general knowledge with contextual knowledge. Therefore, we conclude that graph-based impact analysis represents a promising decision support tool for herd

  5. Experiments on vibro-impact dynamics of loosely supported tubes under harmonic excitation

    International Nuclear Information System (INIS)

    Axisa, F.; Izquierdo, P.

    1992-01-01

    Computational methods have been recently developed by the authors and others to predict the working life or the acceptable vibration limit of tubular structures experiencing fretting-wear caused by impact-sliding interaction with loose supports or adjacent structures. This problem is of practical interest in various nuclear and other industrial components. This paper reports an experimental work intended to validate the numerical techniques used to compute the tube non-linear vibration in presence of impact-sliding interaction. Attention is especially focused on the local and time averaged dynamical parameters governing the rate of fretting-wear. The experiments were carried out on a straight tube excited harmonically by a pair of electromagnetic shakers. The tube motion was limited by a loose support situated at about midspan. On the other hand, numerical simulations of the tests were also performed. Comparison between test and computational data resulted in rather satisfactory agreement, based on the averaged impact forces and the wear work rate. Results are also discussed in terms of detailed time histories of tube displacement and impact forces

  6. A method proposal for cumulative environmental impact assessment based on the landscape vulnerability evaluation

    International Nuclear Information System (INIS)

    Pavlickova, Katarina; Vyskupova, Monika

    2015-01-01

    Cumulative environmental impact assessment deals with the occasional use in practical application of environmental impact assessment process. The main reasons are the difficulty of cumulative impact identification caused by lack of data, inability to measure the intensity and spatial effect of all types of impacts and the uncertainty of their future evolution. This work presents a method proposal to predict cumulative impacts on the basis of landscape vulnerability evaluation. For this purpose, qualitative assessment of landscape ecological stability is conducted and major vulnerability indicators of environmental and socio-economic receptors are specified and valuated. Potential cumulative impacts and the overall impact significance are predicted quantitatively in modified Argonne multiple matrixes while considering the vulnerability of affected landscape receptors and the significance of impacts identified individually. The method was employed in the concrete environmental impact assessment process conducted in Slovakia. The results obtained in this case study reflect that this methodology is simple to apply, valid for all types of impacts and projects, inexpensive and not time-consuming. The objectivity of the partial methods used in this procedure is improved by quantitative landscape ecological stability evaluation, assignment of weights to vulnerability indicators based on the detailed characteristics of affected factors, and grading impact significance. - Highlights: • This paper suggests a method proposal for cumulative impact prediction. • The method includes landscape vulnerability evaluation. • The vulnerability of affected receptors is determined by their sensitivity. • This method can increase the objectivity of impact prediction in the EIA process

  7. Impact Dynamics of a Percussive System Based on Rotary-Percussive Ultrasonic Drill

    Directory of Open Access Journals (Sweden)

    Yinchao Wang

    2017-01-01

    Full Text Available This paper presents an impact dynamic analysis of a percussive system based on rotary-percussive ultrasonic drill (RPUD. The RPUD employs vibrations on two sides of one single piezoelectric stack to achieve rotary-percussive motion, which improves drilling efficiency. The RPUD’s percussive system is composed of a percussive horn, a free mass, and a drill tool. The percussive horn enlarges longitudinal vibration from piezoelectric stack and delivers the vibration to the drill tool through the free mass, which forms the percussive motion. Based on the theory of conservation of momentum and Newton’s impact law, collision process of the percussive system under no-load condition is analyzed to establish the collision model between the percussive horn, the free mass, and the drill tool. The collision model shows that free mass transfers high-frequency small-amplitude vibration of percussive horn into low-frequency large-amplitude vibration of drill tool through impact. As an important parameter of free mass, the greater the weight of the free mass, the higher the kinetic energy obtained by drill tool after collision. High-speed camera system and drilling experiments are employed to validate the inference results of collision model by using a prototype of the RPUD.

  8. Qualification and competence in workers with limitations acquired in work related activity

    Directory of Open Access Journals (Sweden)

    Rosa Liliana Sbriller

    2017-12-01

    Full Text Available Introduction: The present research is based on the posture of critical occupational therapy and analyzes the concept of occupational skills required in the current job market, and its application in processes of work exclusion - inclusion in people with limitations acquired due to work related activities. Objective: Describe and analyze the concept of labor competencies within the transformation of the globalized occupational world, and analyze the impact of the required skills in the processes of exclusion - inclusion of people with limitations acquired due to work related activities. Method: Qualitative research. Technique: Documentary analysis and literary review. Results: Consider skills as construction in social action promotes debate within the field of occupational therapy with regard to professional intervention, expanding opportunities for job inclusion of people limitations acquired due to work related activities within the context of economic exclusion from the globalized labor market. Conclusion: Understanding the problem and it is current implications, helps to question praxis of occupational therapy and promotes the basis for an empirical investigation.

  9. Manufacturing and Characterization of Temperature-Stable, Novel, Viscoelastic Polyurea Based Foams for Impact Management

    Science.gov (United States)

    Ramirez, Brian Josue

    The aim of this thesis was to develop advance, high performance polyurea foams for multi-hit capability in protective equipment that respond over a range of impact energies, temperatures, and strain rates. In addition, the microstructure of these materials should be tunable such that the peak stress (or force) transmitted across the foam section can be limited to a specific value defined by an injury threshold while maximizing impact energy absorption. Novel polyurea foams were manufactured and found to exhibit a reversible viscoelastic shear deformation at the molecular level. The intrinsic shear dissipation process is synergistically coupled to controlled collapse of a novel pore structure. The microstructure compromises of stochastic polyhedral cells ranging from 200 - 500 mum with perforated membranes with small apertures ( 20 mum). This makes them strain rate sensitive as the rate at which the air escapes the cells depend upon the loading rate. These mechanisms operate simultaneously and sequentially, thereby significantly reducing the transmitted impact forces across the foam section. Thus, they behave as an elastically modulated layered composite because the cells stiffen or soften in response to the changing loading rate. Therefore, the newly developed polyurea foams are able to manage the varying material strain rate that occurs within the same loading event without the need to modulate the stiffness or density. Additionally, polyurea foams were found to retain its excellent impact properties over a range of temperatures (0°C to 40°C) by having a glass transition temperature well below 0°C. This is in contrast to commercially available high performance foams that have the glass transition temperature near 0°C and absorb energy through phase transformation at ambient conditions, but significantly stiffen at lower temperatures, and dramatically soften at higher temperatures. This expands the application domain of polyurea foam material considerably as it

  10. A method for comparing impacts with real targets to impacts onto the IAEA unyielding target

    International Nuclear Information System (INIS)

    Ammerman, D.J.

    1993-01-01

    A mathematically rigorous method is developed for relating impacts with yielding targets to lower velocity impacts with unyielding targets. The method correctly models the mechanics of the impact and the conversion of kinetic energy to strain energy. An important result shown by the example problem is that apparent target hardness depends on the stiffness of the impacting package. For a cask with impact limiters a 26.8 m/s impact onto hard soil results in equivalent forces as a 13.9 m/s impact onto an unyielding target. For the same cask without impact limiters a 26.8 m/s impact onto hard soil is equivalent to a 1.74 m/s impact onto an unyielding target. This is one reason why non-technical members of the public often have difficulty realizing the severity of the regulatory impact. For most people, objects such as trucks and bridge columns appear to be very hard, but to many radioactive material shipping packages these objects are relatively soft. The method discussed in this paper for relating impacts with yielding targets to lower velocity impacts with unyielding targets helps to explain how the regulatory impact accident provides a high degree of safety to the public. This methodology is relatively simple to use, and can be applied to the 'What if' scenarios brought up by interveners. (J.P.N.)

  11. Data-based Speed-limit-respecting Eco-driving System

    Czech Academy of Sciences Publication Activity Database

    Suzdaleva, Evgenia; Nagy, Ivan

    2014-01-01

    Roč. 44, č. 1 (2014), s. 253-264 ISSN 0968-090X R&D Projects: GA TA ČR TA01030123 Institutional support: RVO:67985556 Keywords : eco-driving * fuel consumption * recommended speed * recursive estimation * quadratic optimal control * dynamic programming Subject RIV: BC - Control Systems Theory Impact factor: 2.818, year: 2014 http://library.utia.cas.cz/separaty/2014/AS/suzdaleva-0427942.pdf

  12. HVI Ballistic Limit Charaterization of Fused Silica Thermal Pane

    Science.gov (United States)

    Bohl, William E.; Miller, Joshua E.; Christiansen, Eric L.; Deighton, Kevin.; Davis, Bruce

    2015-01-01

    The Orion spacecraft's windows are exposed to the micrometeroid and orbital debris (MMOD) space environments while in space as well as the Earth entry environment at the mission's conclusion. The need for a low-mass spacecraft window design drives the need to reduce conservatism when assessing the design for loss of crew due to MMOD impact and subsequent Earth entry. Therefore, work is underway at NASA and Lockheed Martin to improve characterization of the complete penetration ballistic limit of an outer fused silica thermal pane. Hypervelocity impact tests of the window configuration at up to 10 km/s and hydrocode modeling have been performed with a variety of projectile materials to enable refinement of the fused silica ballistic limit equation.

  13. Environmental impact assessment on the radioactive of a REE separation project

    International Nuclear Information System (INIS)

    Li Nana; Zhu Yucheng; Cai Minqi

    2011-01-01

    Based on the investigation of field actual environment and analysis of radioactive sources, and industrial process techniques, environmental impact of the radioactive from a REE separation project has been analyzed, assessed and forecasted. The investigation and monitoring of actual radioactive in the environment indicated that value of assessment factors remained within the range of natural background level as a whole. The maximum annual individual effective dose for occupational worker and the public were forecasted and were found to be 1.622 mSv/a and 0.029 mSv/a respectively. Both of the values are lower than annual dose limit respectively. The radioactive impact of this project on the environment will comply with the standard limit of law and requirements after the reservation measures are carried out to REE. (authors)

  14. The physical limits to economic growth by R&D funded innovation

    International Nuclear Information System (INIS)

    Beaudreau, Bernard C.; Lightfoot, H. Douglas

    2015-01-01

    For over three decades, worldwide R&D expenditure has risen steadily, reaching $1.3 trillion in 2011. Underlying this unprecedented growth is a deeply-held belief that R&D is a prime mover of economic growth. Ironically, despite three decades of massive R&D expenditure, growth levels have remained substantially lower than that of the immediate post World War II period. This raises important theoretical questions regarding R&D and its impact on growth per se. For example, R&D-growth has been modeled and continues to be modeled as an unbounded set. This has not been inconsequential because it has introduced an upward bias in growth projections as evidenced in the literature. More importantly, are there physically-determined upper limits to R&D-based growth and, if so, what are they? This paper uses the physical sciences to map the physical limits to R&D-based innovation. A consilient model of economic growth is presented and upper bounds for energy efficiency-based growth rates are provided, both for individual energy sectors and globally. We find that with economic growth by innovation limited by physical conditions, increasing the rate of economic growth can only come through increasing the rate of energy consumption. - Highlights: • Worldwide, R&D expenditures have grown steadily yet economic growth remains anemic. • This paper examines the physics of process-based R&D using a consilient model of wealth creation. • Growth is formalized in terms of (i) energy consumption growth and (ii) changes in energy efficiency. • Detailed estimates of changes in energy efficiency are provided for the period 1990–2100. • The results of the paper establish the upper bound of changes in energy efficiency at 0.68 percent per year

  15. Impact of School-Based HIV Prevention Program in Post-Conflict Liberia

    Science.gov (United States)

    Atwood, Katharine A.; Kennedy, Stephen B.; Shamblen, Steve; Tegli, Jemee; Garber, Salome; Fahnbulleh, Pearl W.; Korvah, Prince M.; Kolubah, Moses; Mulbah-Kamara, Comfort; Fulton, Shannon

    2012-01-01

    This paper presents findings of a feasibility study to adapt and evaluate the impact of an evidence-based HIV prevention intervention on sexual risk behaviors of in-school 6th grade youth in post-conflict Liberia (n = 812). The study used an attention-matched, group randomized controlled trial. Four matched pairs of elementary/middle schools in…

  16. Evaluation of sanitary impact of urban air pollution. Agglomeration of Orleans and Tours impact at short and long term; Evaluation de l'impact sanitaire de la pollution atmospherique urbaine. Agglomeration d'Orleans et de Tours impact a cour et long terme

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    An health impact assessment of air pollution based on the I.n.V.S. guidelines has been conducted in Orleans and Tours according to the regional Plan for the quality of air in the region of Centre. Short-term effects on morbidity (hospital admissions in 2002 and 2003) and mortality. Long-term mortality was also estimated. The estimated numbers of hospitalizations are: Orleans: 11 [2-23]* for respiratory admissions and 26 [16-36]* for cardiovascular admissions; Tours: 11 [3-22]* for respiratory admissions and 34 [20-48]* for cardiovascular admissions. For long-term mortality the estimated impact is 59 [36-84]* in Orleans and 61 [37-86]* in Tours. The different scenarios of air pollution reduction showed that the most effective ones are those which lead to reduce of 25% the mean of the involved pollutant. Results showed that air pollution are even resulting in health effects for some levels of pollution than current limits. The most effective actions should therefore associate reduction of the source emissions on a daily basis and decrease of the over-limits levels of pollution. (author)

  17. Switchgrass-Based Bioethanol Productivity and Potential Environmental Impact from Marginal Lands in China

    Directory of Open Access Journals (Sweden)

    Xun Zhang

    2017-02-01

    Full Text Available Switchgrass displays an excellent potential to serve as a non-food bioenergy feedstock for bioethanol production in China due to its high potential yield on marginal lands. However, few studies have been conducted on the spatial distribution of switchgrass-based bioethanol production potential in China. This study created a land surface process model (Environmental Policy Integrated Climate GIS (Geographic Information System-based (GEPIC model coupled with a life cycle analysis (LCA to explore the spatial distribution of potential bioethanol production and present a comprehensive analysis of energy efficiency and environmental impacts throughout its whole life cycle. It provides a new approach to study the bioethanol productivity and potential environmental impact from marginal lands based on the high spatial resolution GIS data, and this applies not only to China, but also to other regions and to other types of energy plant. The results indicate that approximately 59 million ha of marginal land in China are suitable for planting switchgrass, and 22 million tons of ethanol can be produced from this land. Additionally, a potential net energy gain (NEG of 1.75 x 106 million MJ will be achieved if all of the marginal land can be used in China, and Yunnan Province offers the most significant one that accounts for 35% of the total. Finally, this study obtained that the total environmental effect index of switchgrass-based bioethanol is the equivalent of a population of approximately 20,300, and a reduction in the global warming potential (GWP is the most significant environmental impact.

  18. The ethical approach to evidence-based medicine | Kruger | South ...

    African Journals Online (AJOL)

    Abstract. This paper will explore the role of evidence-based medicine in ethical practice of health care professionals. It will also address some of its limitations and potential for negative impact on health care.

  19. Novel limiter pump topologies

    International Nuclear Information System (INIS)

    Schultz, J.H.

    1981-01-01

    The use of limiter pumps as the principle plasma exhaust system of a magnetic confinement fusion device promises significant simplification, when compared to previously investigating divertor based systems. Further simplifications, such as the integration of the exhaust system with a radio frequency heating system and with the main reactor shield and structure are investigated below. The integrity of limiters in a reactor environment is threatened by many mechanisms, the most severe of which may be erosion by sputtering. Two novel topolgies are suggested which allow high erosion without limiter failure

  20. Novel limiter pump topologies

    International Nuclear Information System (INIS)

    Schultz, J.H.

    1981-01-01

    The use of limiter pumps as the principle plasma exhaust system of a magnetic confinement fusion device promises significant simplification, when compared to previously investigating divertor based systems. Further simplifications, such as the integration of the exhaust system with a radio frequency heating system and with the main reactor shield and structure are investigated below. The integrity of limiters in a reactor environment is threatened by many mechanisms, the most severe of which may be erosion by sputtering. Two novel topologies are suggested which allow high erosion without limiter failure