Susceptibility to Heat-Related Fluid and Electrolyte Imbalance Emergency Department Visits in Atlanta, Georgia, USA

Directory of Open Access Journals (Sweden)

Leila Heidari

2016-10-01

Full Text Available Identification of populations susceptible to heat effects is critical for targeted prevention and more accurate risk assessment. Fluid and electrolyte imbalance (FEI may provide an objective indicator of heat morbidity. Data on daily ambient temperature and FEI emergency department (ED visits were collected in Atlanta, Georgia, USA during 1993–2012. Associations of warm-season same-day temperatures and FEI ED visits were estimated using Poisson generalized linear models. Analyses explored associations between FEI ED visits and various temperature metrics (maximum, minimum, average, and diurnal change in ambient temperature, apparent temperature, and heat index modeled using linear, quadratic, and cubic terms to allow for non-linear associations. Effect modification by potential determinants of heat susceptibility (sex; race; comorbid congestive heart failure, kidney disease, and diabetes; and neighborhood poverty and education levels was assessed via stratification. Higher warm-season ambient temperature was significantly associated with FEI ED visits, regardless of temperature metric used. Stratified analyses suggested heat-related risks for all populations, but particularly for males. This work highlights the utility of FEI as an indicator of heat morbidity, the health threat posed by warm-season temperatures, and the importance of considering susceptible populations in heat-health research.

Heat-Related Illnesses

Medline Plus

Full Text Available ... Be Prepared Safe Citizen Day Organize Important Medical Information ER Checklists Preparing for Emergencies Be ready to ... anyone can be affected. Here you will find information about heat cramps and heat stroke and exhaustion. ...

Features of an emergency heat-conducting path in reactors about lead-bismuth and lead heat-carriers

International Nuclear Information System (INIS)

Beznosov, A.V.; Bokova, T.A.; Molodtsov, A.A.

2006-01-01

The reactor emergency heat removal systems should transfer heat from the surface of reactor core fuel element claddings to the primary circuit followed by heat transfer to the environment. One suggests three design approaches for emergency heat removal systems in lead-bismuth and lead cooled reactor circuits that take account of the peculiar nature of their features. Application of the discussed systems for emergency heat removal improves safety of lead-bismuth and lead cooled reactor plants [ru

Quantifying Livestock Heat Stress Impacts in the Sahel

Science.gov (United States)

Broman, D.; Rajagopalan, B.; Hopson, T. M.

2014-12-01

Livestock heat stress, especially in regions of the developing world with limited adaptive capacity, has a largely unquantified impact on food supply. Though dominated by ambient air temperature, relative humidity, wind speed, and solar radiation all affect heat stress, which can decrease livestock growth, milk production, reproduction rates, and mortality. Indices like the thermal-humidity index (THI) are used to quantify the heat stress experienced from climate variables. Livestock experience differing impacts at different index critical thresholds that are empirically determined and specific to species and breed. This lack of understanding has been highlighted in several studies with a limited knowledge of the critical thresholds of heat stress in native livestock breeds, as well as the current and future impact of heat stress,. As adaptation and mitigation strategies to climate change depend on a solid quantitative foundation, this knowledge gap has limited such efforts. To address the lack of study, we have investigated heat stress impacts in the pastoral system of Sub-Saharan West Africa. We used a stochastic weather generator to quantify both the historic and future variability of heat stress. This approach models temperature, relative humidity, and precipitation, the climate variables controlling heat stress. Incorporating large-scale climate as covariates into this framework provides a better historical fit and allows us to include future CMIP5 GCM projections to examine the climate change impacts on heat stress. Health and production data allow us to examine the influence of this variability on livestock directly, and are considered in conjunction with the confounding impacts of fodder and water access. This understanding provides useful information to decision makers looking to mitigate the impacts of climate change and can provide useful seasonal forecasts of heat stress risk. A comparison of the current and future heat stress conditions based on

Life expectancy impacts due to heating energy utilization in China: Distribution, relations, and policy implications.

Science.gov (United States)

Wang, Shaobin; Luo, Kunli

2018-01-01

The relation between life expectancy and energy utilization is of particular concern. Different viewpoints concerned the health impacts of heating policy in China. However, it is still obscure that what kind of heating energy or what pattern of heating methods is the most related with the difference of life expectancies in China. The aim of this paper is to comprehensively investigate the spatial relations between life expectancy at birth (LEB) and different heating energy utilization in China by using spatial autocorrelation models including global spatial autocorrelation, local spatial autocorrelation and hot spot analysis. The results showed that: (1) Most of heating energy exhibit a distinct north-south difference, such as central heating supply, stalks and domestic coal. Whereas spatial distribution of domestic natural gas and electricity exhibited west-east differences. (2) Consumption of central heating, stalks and domestic coal show obvious spatial dependence. Whereas firewood, natural gas and electricity did not show significant spatial autocorrelation. It exhibited an extinct south-north difference of heat supply, stalks and domestic coal which were identified to show significant positive spatial autocorrelation. (3) Central heating, residential boilers and natural gas did not show any significant correlations with LEB. While, the utilization of domestic coal and biomass showed significant negative correlations with LEB, and household electricity shows positive correlations. The utilization of domestic coal in China showed a negative effect on LEB, rather than central heating. To improve the solid fuel stoves and control consumption of domestic coal consumption and other low quality solid fuel is imperative to improve the public health level in China in the future. Copyright © 2017 Elsevier B.V. All rights reserved.

Emergency planning and emergency drill for a 5 MW district heating reactor

International Nuclear Information System (INIS)

Shi Zhongqi; Wu Zhongwang; Hu Jingzhong; Feng Yuying; Li Zhongsan; Dong Shiyuan

1991-01-01

The authors describes the main contents of the emergency planning for a 5 MW nuclear district heating reactor and some considerations for the planning's making, and presents the situation on implementing emergency preparedness and an emergency drill that has been carried out

Syndromic surveillance and heat wave morbidity: a pilot study based on emergency departments in France

Directory of Open Access Journals (Sweden)

Filleul Laurent

2009-02-01

Full Text Available Abstract Background The health impacts of heat waves are serious and have prompted the development of heat wave response plans. Even when they are efficient, these plans are developed to limit the health effects of heat waves. This study was designed to determine relevant indicators related to health effects of heat waves and to evaluate the ability of a syndromic surveillance system to monitor variations in the activity of emergency departments over time. The study uses data collected during the summer 2006 when a new heat wave occurred in France. Methods Data recorded from 49 emergency departments since July 2004, were transmitted daily via the Internet to the French Institute for Public Health Surveillance. Items collected on patients included diagnosis (ICD10 codes, outcome, and age. Statistical t-tests were used to compare, for several health conditions, the daily averages of patients within different age groups and periods (whether 'on alert' or 'off alert'. Results A limited number of adverse health conditions occurred more frequently during hot period: dehydration, hyperthermia, malaise, hyponatremia, renal colic, and renal failure. Over all health conditions, the total number of patients per day remained equal between the 'on alert' and 'off alert' periods (4,557.7/day vs. 4,511.2/day, but the number of elderly patients increased significantly during the 'on alert' period relative to the 'off alert' period (476.7/day vs. 446.2/day p Conclusion Our results show the interest to monitor specific indicators during hot periods and to focus surveillance efforts on the elderly. Syndromic surveillance allowed the collection of data in real time and the subsequent optimization of the response by public health agencies. This method of surveillance should therefore be considered as an essential part of efforts to prevent the health effects of heat waves.

Design and transient analyses of emergency passive residual heat removal system of CPR1000

International Nuclear Information System (INIS)

Zhang, Y.P.; Qiu, S.Z.; Su, G.H.; Tian, W.X.

2012-01-01

Highlights: ► Designing an EPRHRs for CPR1000. ► Developing a RELAP model of the EPRHRs. ► The EPRHRs could take away the decay heat effectively. - Abstract: The steam generator secondary emergency passive residual heat removal system (EPRHRs) is a new design for traditional generation II + reactor CPR1000. The EPRHRs is designed to improve the safety and reliability of CPR1000 by completely or partially replacing traditional emergency water cooling system in the event of the station blackout or loss of heat sink accident. The EPRHRs consists of steam generator (SG), heat exchanger (HX), emergency makeup tank (EMT), cooling water tank (CWT), and corresponding pipes and valves. In order to improve the safety and reliability of CPR1000, the model of the primary loop and the EPRHRs was developed to investigate residual heat removal capability of the EPRHRs and the transient characteristics of the primary loop affected by the EPRHRs using RELAP5/MOD3.4. The transient characteristics of the primary loop and the EPRHRs were calculated in the event of station blackout accident. Sensitivity studies of the EPRHRs were also conducted to investigate the response of the primary loop and the EPRHRs on the main parameters of the EPRHRs. The EPRHRs could supply water to the SG shell side from the EMT successfully. The calculation results showed that the EPRHRs could take away the decay heat from the primary loop effectively, and that the single-phase and two-phase natural circulations were established in the primary loop and EPRHRs loop, respectively. The results also indicated that the effect of isolation valve open time on the transient characteristics of the primary loop was little. However, the effect of isolation valve open time on the EPRHRs condensate flow was relatively greater. The isolation valves should not be opened too rapidly during the isolation valve opening process, and the isolation valve opening time should be greater than 10 s, which could avoid the

The impact of alcohol-related presentations on a New Zealand hospital emergency department.

Science.gov (United States)

Stewart, Rebecca; Das, Manidipa; Ardagh, Michael; Deely, Joanne M; Dodd, Stuart; Bartholomew, Nadia; Pearson, Scott; Spearing, Ruth; Williams, Tracey; Than, Martin

2014-08-29

To determine the impact of alcohol-related presentations on the Christchurch Hospital Emergency Department (ED). Over 42 8-hour shifts (2 weeks) between 15 November 2013 and 9 December 2013, patients attending the ED with recent alcohol consumption were classified as screen-positive (consumed alcohol in the 4 hours prior to presentation) or not. A subset of screen-positive patients was classified as impact-positive (alcohol consumption clearly contributed to the reason for presenting). Data were analysed in relation to days/shifts for gender, age, disruptive behaviour, medical reasons for presenting, and completeness of ED records. Of the 3619 patients screened in the study, 268 (7.4%) and 182 (5%) were screen-positive and impact-positive, respectively. Most patients attended the ED on the weekends (58%: 105/182), particularly on Saturday night (31%; 56/182). More males (118) than females (64) were impact-positive. Of the impact-positive males, most were 16-25 years old (37%; 44/118) or 41-61 years old (32%; 38/118), attended the ED on weekend night shifts (24%; 28/118), and sought treatment for non- interpersonal trauma (38%; 45/118) or interpersonal trauma due to violence (17%; 20/118). Of the female impact-positive patients, most were 16-25 years old (41%; 26/64) or 41-60 years old (33%; 21/64), and presented for deliberate self-harm (36%; 23/64) or non-interpersonal trauma (27%; 17/64). Of the 182 impact-positive patients, 86% (156) were recorded in the ED computer system. Alcohol-related presentations had a significant impact on the ED, particularly on weekends. Teenagers, young adults and middle-aged adults contributed to the alcohol-related patient impact on weekends. Male patients were a significant burden on Saturday evening and night shifts.

Air-source heat pump carbon footprints: HFC impacts and comparison to other heat sources

International Nuclear Information System (INIS)

Johnson, Eric P.

2011-01-01

European governments see that heat pumps could reduce carbon emissions in space- and hot-water heating. EU's Renewable Energy Directive designates heat pumps as renewable - eligible for various subsidies - if their carbon footprints are below an implied, average threshold. This threshold omits carbon generated by manufacture and emission of a heat-pump's fluorocarbon refrigerant. It also omits the footprint of the heat pump's hardware. To see if these omissions are significant, this study calculated carbon footprints of representative, residential heat pumps in the UK. Three findings emerged. First, in relation to power generation, which accounts for most of a heat-pump's greenhouse-gas emissions, fluorocarbons add another 20% to the footprint. Second, at UK efficiencies a heat-pump footprint (in kg CO 2 e emitted per kWh delivered) is comparable or higher than footprints of gaseous fuels used in heating. It is lower than the footprint of heating oil and far lower than the footprints of solid fuels. Third, production and disposal of a heat pump's hardware is relatively insignificant, accounting for only 2-3% of the overall heat-pump footprint. Sensitivities to the results were assessed: key factors are footprint of electricity generation, F-gas composition and leak rates and type of wall construction. - Research highlights: → Refrigerant emissions add 20% to a UK air-source heat pump's carbon footprint. → This contribution is so far ignored by regulations. → UK heat pump footprints are comparable to those of gaseous fuels.

Raising Awareness on Heat Related Mortality in Bangladesh

Science.gov (United States)

Arrighi, J.; Burkart, K.; Nissan, H.

2017-12-01

Extreme heat is the leading cause of weather-related deaths in the United States and Europe, and was responsible for four of the ten deadliest natural disasters worldwide in 2015. Near the tropics, where hot weather is considered the norm, perceived heat risk is often low, but recent heat waves in South Asia have caught the attention of the health community, policy-makers and the public. In a recent collaboration between the Red Cross Red Crescent Climate Centre, Columbia University and BBC Media Action the effects of extreme heat in Bangladesh were analyzed and the findings were subsequently used as a basis to raise awareness about the impacts of extreme heat on the most vulnerable, to the general public. Analysis of excess heat in Bangladesh between 2003 and 2007 showed that heatwaves occur between April and June with most extreme heat events occurring in May. Between 2003 and 2007 it is estimated that an average of 1500 people died per year due to heatwaves lasting three days or longer, with an eight-day heatwave in 2005 resulting in a minimum of 3,800 excess deaths. Utilizing these findings BBC Media Action launched an online communications campaign in May 2017 ultimately reaching approximately 3.9 million people with information on reducing the impacts of extreme heat. This presentation will highlight key findings from the study of heat related mortality in Bangladesh as well as highlight the benefit of collaboration between scientists and communicators for increasing awareness about the effects of extreme heat on the most vulnerable.

An energy and mortality impact assessment of the urban heat island in the US

International Nuclear Information System (INIS)

Lowe, Scott A.

2016-01-01

Increased summer energy use and increased summer heat related mortality are the two most cited detrimental impacts of the urban heat island (UHI). An assessment of these impacts was made that considered the annual impact of the UHI, not just the summer impact. It was found that in north of the US there was a net decrease in energy use from the UHI, as heating energy reductions were larger than the increase in cooling energy. In the south there was a net energy increase from the UHI. The impact of the UHI on heat related deaths was an estimated increase of 1.1 deaths per million people. The impact of the UHI on cold related deaths was an estimated decrease of 4.0 deaths per million people. These estimates are caveated by the acknowledgement that compounding factors influence mortality. Hypothermia related death rates were three times higher in rural areas than urban areas. This is surprising as the homeless population is usually considered the most at risk, yet they mostly live in urban areas. - Highlights: • The urban heat island (UHI) may actually be beneficial in colder cities in the US in terms of energy use • The UHI may cause an increase in heat related mortality of ~ 1 deaths per million • In winter the UHI may decrease cold related mortality by ~ 4 deaths per million • Cold related death rates were 3 times higher in rural areas although the homeless population live mainly in urban areas

An energy and mortality impact assessment of the urban heat island in the US

Energy Technology Data Exchange (ETDEWEB)

Lowe, Scott A., E-mail: Scott.lowe@manhattan.edu

2016-01-15

Increased summer energy use and increased summer heat related mortality are the two most cited detrimental impacts of the urban heat island (UHI). An assessment of these impacts was made that considered the annual impact of the UHI, not just the summer impact. It was found that in north of the US there was a net decrease in energy use from the UHI, as heating energy reductions were larger than the increase in cooling energy. In the south there was a net energy increase from the UHI. The impact of the UHI on heat related deaths was an estimated increase of 1.1 deaths per million people. The impact of the UHI on cold related deaths was an estimated decrease of 4.0 deaths per million people. These estimates are caveated by the acknowledgement that compounding factors influence mortality. Hypothermia related death rates were three times higher in rural areas than urban areas. This is surprising as the homeless population is usually considered the most at risk, yet they mostly live in urban areas. - Highlights: • The urban heat island (UHI) may actually be beneficial in colder cities in the US in terms of energy use • The UHI may cause an increase in heat related mortality of ~ 1 deaths per million • In winter the UHI may decrease cold related mortality by ~ 4 deaths per million • Cold related death rates were 3 times higher in rural areas although the homeless population live mainly in urban areas.

Heat-related illness in China, summer of 2013

Science.gov (United States)

Gu, Shaohua; Huang, Cunrui; Bai, Li; Chu, Cordia; Liu, Qiyong

2016-01-01

Extreme heat events have occurred more frequently in China in recent years, leading to serious impacts on human life and the health care system. To identify the characteristics of individuals with heat-related illnesses in China during the summer of 2013, we collected the data from the Heat-related Illness Surveillance System in Chinese Center for Disease Control and Prevention (China CDC). A total of 5758 cases were reported in the summer of 2013, mostly concentrated in urban areas around the middle and lower reaches of the Yangtze River. We found a difference in age distribution of percentage of deaths from heat-related illness between males and females. Severe cases in males mostly occurred in the age group 45-74 years but in females mostly in the age group over 75. A distributed lag non-linear model had been used to identify population vulnerabilities in Ningbo and Chongqing. The results show that there was a clear positive relationship between maximum temperature and heat-related illness, and the heat effect was nonlinear and could last for 3 days. The elderly and males in the range of 45-64 years old might be the most vulnerable people of heat-related illness in China. We also highlighted some deficiencies of the surveillance system, such that the reported data were not accurate, comprehensive, or timely enough at this stage.

Impacts of the 2015 heat waves on mortality in the Czech Republic-a comparison with previous heat waves

Czech Academy of Sciences Publication Activity Database

Urban, A.; Hanzlíková, Hana; Kyselý, J.; Plavcová, E.

2017-01-01

Roč. 14, č. 12 (2017), č. článku 1562. ISSN 1660-4601 Institutional support: RVO:67985530 Keywords : heat-related mortality * heat-wave * excess heat factor * Central Europe Subject RIV: DG - Athmosphere Sciences, Meteorology OBOR OECD: Meteorology and atmospheric sciences Impact factor: 2.101, year: 2016

Health impacts of workplace heat exposure: an epidemiological review.

Science.gov (United States)

Xiang, Jianjun; Bi, Peng; Pisaniello, Dino; Hansen, Alana

2014-01-01

With predicted increasing frequency and intensity of extremely hot weather due to changing climate, workplace heat exposure is presenting an increasing challenge to occupational health and safety. This article aims to review the characteristics of workplace heat exposure in selected relatively high risk occupations, to summarize findings from published studies, and ultimately to provide suggestions for workplace heat exposure reduction, adaptations, and further research directions. All published epidemiological studies in the field of health impacts of workplace heat exposure for the period of January 1997 to April 2012 were reviewed. Finally, 55 original articles were identified. Manual workers who are exposed to extreme heat or work in hot environments may be at risk of heat stress, especially those in low-middle income countries in tropical regions. At risk workers include farmers, construction workers, fire-fighters, miners, soldiers, and manufacturing workers working around process-generated heat. The potential impacts of workplace heat exposure are to some extent underestimated due to the underreporting of heat illnesses. More studies are needed to quantify the extent to which high-risk manual workers are physiologically and psychologically affected by or behaviourally adapt to workplace heat exposure exacerbated by climate change.

Impacts of the 2015 Heat Waves on Mortality in the Czech Republic—A Comparison with Previous Heat Waves

Czech Academy of Sciences Publication Activity Database

Urban, A.; Hanzlíková, H.; Kyselý, Jan; Plavcová, E.

2017-01-01

Roč. 14, č. 12 (2017), č. článku 1452. ISSN 1660-4601 Institutional support: RVO:86652079 Keywords : heat-related mortality * heat-wave * excess heat factor * Central Europe Subject RIV: EH - Ecology, Behaviour OBOR OECD: Environmental sciences (social aspects to be 5.7) Impact factor: 2.101, year: 2016

A passive emergency heat sink for water-cooled reactors with particular application to CANDU reactors

International Nuclear Information System (INIS)

Spinks, N.J.

1996-01-01

Water in an overhead pool can serve as a general-purpose passive emergency heat sink for water-cooled reactors. It can be used for containment cooling, for emergency depressurization of the heat transport-system, or to receive any other emergency heat, such as that from the CANDU moderator. The passive emergency water system provides in-containment depressurization of steam generators and no other provision is needed for supply of low-pressure emergency water to the steam generators. For containment cooling, the pool supplies water to the tube side of elevated tube banks inside containment. The elevation with respect to the reactor heat source maximizes heat transport, by natural convection, of hot containment gases. This effective heat transport combines with the large heat-transfer coefficients of tube banks, to reduce containment overpressure during accidents. Cooled air from the tube banks is directed past the break in the heat-transport system, to facilitate removal of hydrogen using passive catalytic recombiners. (author)

Film Levitation of Droplet Impact on Heated Nanotube Surfaces

Science.gov (United States)

Duan, Fei; Tong, Wei; Qiu, Lu

2017-11-01

Contact boiling of an impacting droplet impacting on a heated surface can be observed when the surface temperature is able to activate the nucleation and growth of vapor bubbles, the phenomena are related to nature and industrial application. The dynamic boiling patterns us is investigated when a single falling water droplet impacts on a heated titanium (Ti) surface covered with titanium oxide (TiO2) nanotubes. In the experiments, the droplets were generated from a flat-tipped needle connected to a syringe mounted on a syringe pump. The droplet diameter and velocity before impacting on the heated surface are measured by a high-speed camera with the Weber number is varied from 45 to 220. The dynamic wetting length, spreading diameter, levitation distance, and the associated parameter are measured. Interesting film levitation on titanium (Ti) surface has been revealed. The comparison of the phase diagrams on the nanotube surface and bare Ti surface suggests that the dynamic Leidenfrost point of the surface with the TiO2 nanotubes has been significantly delayed as compared to that on a bare Ti surface. The delay is inferred to result from the increase in the surface wettability and the capillary effect by the nanoscale tube structure. The further relation is discussed.

Projecting Future Heat-Related Mortality under Climate Change Scenarios: A Systematic Review

Science.gov (United States)

Barnett, Adrian Gerard; Wang, Xiaoming; Vaneckova, Pavla; FitzGerald, Gerard; Tong, Shilu

2011-01-01

Background: Heat-related mortality is a matter of great public health concern, especially in the light of climate change. Although many studies have found associations between high temperatures and mortality, more research is needed to project the future impacts of climate change on heat-related mortality. Objectives: We conducted a systematic review of research and methods for projecting future heat-related mortality under climate change scenarios. Data sources and extraction: A literature search was conducted in August 2010, using the electronic databases PubMed, Scopus, ScienceDirect, ProQuest, and Web of Science. The search was limited to peer-reviewed journal articles published in English from January 1980 through July 2010. Data synthesis: Fourteen studies fulfilled the inclusion criteria. Most projections showed that climate change would result in a substantial increase in heat-related mortality. Projecting heat-related mortality requires understanding historical temperature–mortality relationships and considering the future changes in climate, population, and acclimatization. Further research is needed to provide a stronger theoretical framework for projections, including a better understanding of socioeconomic development, adaptation strategies, land-use patterns, air pollution, and mortality displacement. Conclusions: Scenario-based projection research will meaningfully contribute to assessing and managing the potential impacts of climate change on heat-related mortality. PMID:21816703

The impact of winter heating on air pollution in China.

Science.gov (United States)

Xiao, Qingyang; Ma, Zongwei; Li, Shenshen; Liu, Yang

2015-01-01

Fossil-fuel combustion related winter heating has become a major air quality and public health concern in northern China recently. We analyzed the impact of winter heating on aerosol loadings over China using the MODIS-Aqua Collection 6 aerosol product from 2004-2012. Absolute humidity (AH) and planetary boundary layer height (PBL) -adjusted aerosol optical depth (AOD*) was constructed to reflect ground-level PM2.5 concentrations. GIS analysis, standard statistical tests, and statistical modeling indicate that winter heating is an important factor causing increased PM2.5 levels in more than three-quarters of central and eastern China. The heating season AOD* was more than five times higher as the non-heating season AOD*, and the increase in AOD* in the heating areas was greater than in the non-heating areas. Finally, central heating tend to contribute less to air pollution relative to other means of household heating.

Ohmic Heating: An Emerging Concept in Organic Synthesis.

Science.gov (United States)

Silva, Vera L M; Santos, Luis M N B F; Silva, Artur M S

2017-06-12

The ohmic heating also known as direct Joule heating, is an advanced thermal processing method, mainly used in the food industry to rapidly increase the temperature for either cooking or sterilization purposes. Its use in organic synthesis, in the heating of chemical reactors, is an emerging method that shows great potential, the development of which has started recently. This Concept article focuses on the use of ohmic heating as a new tool for organic synthesis. It presents the fundamentals of ohmic heating and makes a qualitative and quantitative comparison with other common heating methods. A brief description of the ohmic reactor prototype in operation is presented as well as recent examples of its use in organic synthesis at laboratory scale, thus showing the current state of the research. The advantages and limitations of this heating method, as well as its main current applications are also discussed. Finally, the prospects and potential implications of ohmic heating in future research in chemical synthesis are proposed. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Impact of heat stress on conception rate of dairy cows in the moderate climate considering different temperature-humidity index thresholds, periods relative to breeding, and heat load indices.

Science.gov (United States)

Schüller, L K; Burfeind, O; Heuwieser, W

2014-05-01

The objectives of this retrospective study were to investigate the relationship between temperature-humidity index (THI) and conception rate (CR) of lactating dairy cows, to estimate a threshold for this relationship, and to identify periods of exposure to heat stress relative to breeding in an area of moderate climate. In addition, we compared three different heat load indices related to CR: mean THI, maximum THI, and number of hours above the mean THI threshold. The THI threshold for the influence of heat stress on CR was 73. It was statistically chosen based on the observed relationship between the mean THI at the day of breeding and the resulting CR. Negative effects of heat stress, however, were already apparent at lower levels of THI, and 1 hour of mean THI of 73 or more decreased the CR significantly. The CR of lactating dairy cows was negatively affected by heat stress both before and after the day of breeding. The greatest negative impact of heat stress on CR was observed 21 to 1 day before breeding. When the mean THI was 73 or more in this period, CR decreased from 31% to 12%. Compared with the average maximum THI and the total number of hours above a threshold of more than or 9 hours, the mean THI was the most sensitive heat load index relating to CR. These results indicate that the CR of dairy cows raised in the moderate climates is highly affected by heat stress. Copyright © 2014 Elsevier Inc. All rights reserved.

The impact of heatwaves on emergency department visits in Brisbane, Australia: a time series study.

Science.gov (United States)

Toloo, Ghasem Sam; Yu, Weiwei; Aitken, Peter; FitzGerald, Gerry; Tong, Shilu

2014-04-09

The acute health effects of heatwaves in a subtropical climate and their impact on emergency departments (ED) are not well known. The purpose of this study is to examine overt heat-related presentations to EDs associated with heatwaves in Brisbane. Data were obtained for the summer seasons (December to February) from 2000-2012. Heatwave events were defined as two or more successive days with daily maximum temperature ≥34°C (HWD1) or ≥37°C (HWD2). Poisson generalised additive model was used to assess the effect of heatwaves on heat-related visits (International Classification of Diseases (ICD) 10 codes T67 and X30; ICD 9 codes 992 and E900.0). Overall, 628 cases presented for heat-related illnesses. The presentations significantly increased on heatwave days based on HWD1 (relative risk (RR) = 4.9, 95% confidence interval (CI): 3.8, 6.3) and HWD2 (RR = 18.5, 95% CI: 12.0, 28.4). The RRs in different age groups ranged between 3-9.2 (HWD1) and 7.5-37.5 (HWD2). High acuity visits significantly increased based on HWD1 (RR = 4.7, 95% CI: 2.3, 9.6) and HWD2 (RR = 81.7, 95% CI: 21.5, 310.0). Average length of stay in ED significantly increased by >1 hour (HWD1) and >2 hours (HWD2). Heatwaves significantly increase ED visits and workload even in a subtropical climate. The degree of impact is directly related to the extent of temperature increases and varies by socio-demographic characteristics of the patients. Heatwave action plans should be tailored according to the population needs and level of vulnerability. EDs should have plans to increase their surge capacity during heatwaves.

Nanofluids for power engineering: Emergency cooling of overheated heat transfer surfaces

Science.gov (United States)

Bondarenko, B. I.; Moraru, V. N.; Sidorenko, S. V.; Komysh, D. V.

2016-07-01

The possibility of emergency cooling of an overheated heat transfer surface using nanofluids in the case of a boiling crisis is explored by means of synchronous recording of changes of main heat transfer parameters of boiling water over time. Two nanofluids are tested, which are derived from a mixture of natural aluminosilicates (AlSi-7) and titanium dioxide (NF-8). It is found that the introduction of a small portions of nanofluid into a boiling coolant (distilled water) in a state of film boiling ( t heater > 500°C) can dramatically decrease the heat transfer surface temperature to 130-150°C, which corresponds to a transition to a safe nucleate boiling regime without affecting the specific heat flux. The fact that this regime is kept for a long time at a specific heat load exceeding the critical heat flux for water and t heater = 125-130°C is particularly important. This makes it possible to prevent a potential accident emergency (heater burnout and failure of the heat exchanger) and to ensure the smooth operation of the equipment.

Linking Excessive Heat with Daily Heat-Related Mortality over the Coterminous United States

Science.gov (United States)

Quattrochi, Dale A.; Crosson, William L.; Al-Hamdan, Mohammad Z.; Estes, Maurice G., Jr.

2014-01-01

In the United States, extreme heat is the most deadly weather-related hazard. In the face of a warming climate and urbanization, which contributes to local-scale urban heat islands, it is very likely that extreme heat events (EHEs) will become more common and more severe in the U.S. This research seeks to provide historical and future measures of climate-driven extreme heat events to enable assessments of the impacts of heat on public health over the coterminous U.S. We use atmospheric temperature and humidity information from meteorological reanalysis and from Global Climate Models (GCMs) to provide data on past and future heat events. The focus of research is on providing assessments of the magnitude, frequency and geographic distribution of extreme heat in the U.S. to facilitate public health studies. In our approach, long-term climate change is captured with GCM outputs, and the temporal and spatial characteristics of short-term extremes are represented by the reanalysis data. Two future time horizons for 2040 and 2090 are compared to the recent past period of 1981- 2000. We characterize regional-scale temperature and humidity conditions using GCM outputs for two climate change scenarios (A2 and A1B) defined in the Special Report on Emissions Scenarios (SRES). For each future period, 20 years of multi-model GCM outputs are analyzed to develop a 'heat stress climatology' based on statistics of extreme heat indicators. Differences between the two future and the past period are used to define temperature and humidity changes on a monthly time scale and regional spatial scale. These changes are combined with the historical meteorological data, which is hourly and at a spatial scale (12 km) much finer than that of GCMs, to create future climate realizations. From these realizations, we compute the daily heat stress measures and related spatially-specific climatological fields, such as the mean annual number of days above certain thresholds of maximum and minimum air

The impact of educational interventions on attitudes of emergency department staff towards patients with substance-related presentations: a quantitative systematic review.

Science.gov (United States)

Gonzalez, Miriam; Clarke, Diana E; Pereira, Asha; Boyce-Gaudreau, Krystal; Waldman, Celeste; Demczuk, Lisa; Legare, Carol

2017-08-01

Visits to emergency departments for substance use/abuse are common worldwide. However, emergency department health care providers perceive substance-using patients as a challenging group to manage which can lead to negative attitudes. Providing education or experience-based exercises may impact positively on behaviors towards this patient population. Whether staff attitudes are similarly impacted by knowledge acquired through educational interventions remains unknown. To synthesize available evidence on the relationship between new knowledge gained through substance use educational interventions and emergency department health care providers' attitudes towards patients with substance-related presentations. Health care providers working in urban and rural emergency departments of healthcare facilities worldwide providing care to adult patients with substance-related presentations. Quantitative papers examining the impact of substance use educational interventions on health care providers' attitudes towards substance using patients. Experimental and non-experimental study designs. Emergency department staff attitudes towards patients presenting with substance use/abuse. A three-step search strategy was conducted in August 2015 with a search update in March 2017. Studies published since 1995 in English, French or Spanish were considered for inclusion. Two reviewers assessed studies for methodological quality using critical appraisal checklists from the Joanna Briggs Institute Meta-Analysis of Statistics Assessment and Review Instrument (JBI-MAStARI). Reviewers agreed on JBI-MAStARI methodological criteria a study must meet in order to be included in the review (e.g. appropriate use of statistical analysis). The data extraction instrument from JBI-MAStARI was used. As statistical pooling of the data was not possible, the findings are presented in narrative form. A total of 900 articles were identified as relevant for this review. Following abstract and full text

Pediatric heat-related illness: recommendations for prevention and management [digest].

Science.gov (United States)

Dunn, Roberta J; Kim, Tommy Y; Chaudhari, Pradip

2017-08-22

Infants, children, and adolescents are at increased risk for heat-related illness due to their inability to remove themselves from dangerous environments. Evidence shows that morbidity and mortality from heat illness is related to the length of time core temperature is elevated, so rapid reduction and accurate serial measurements are crucial to prevention of organ system damage and death. The primary methods of patient cooling are conduction (ice-water immersion, cold packs) and convection (moisture and moving air). The choice of method used may depend on availability of equipment, but there is evidence that can guide optimal use of resources. This issue presents evidence-based recommendations and best practices in heat-illness resuscitation, including managing children who are obese, have special needs or take medications, and advocacy for prevention strategies. [Points & Pearls is a digest of Pediatric Emergency Medicine Practice].

Racemization of Valine by Impact-Induced Heating

Science.gov (United States)

Furukawa, Yoshihiro; Takase, Atsushi; Sekine, Toshimori; Kakegawa, Takeshi; Kobayashi, Takamichi

2018-03-01

Homochirality plays an important role in all living organisms but its origin remains unclear. It also remains unclear whether such chiral molecules survived terrestrial heavy impact events. Impacts of extraterrestrial objects on early oceans were frequent and could have affected the chirality of oceanic amino acids when such amino acids accumulated during impacts. This study investigated the effects of shock-induced heating on enantiomeric change of valine with minerals such as olivine ([Mg0.9, Fe0.1]2SiO4), hematite (Fe2O3), and calcite (CaCO3). With a shock wave generated by an impact at 0.8 km/s, both d- and l-enriched valine were significantly decomposed and partially racemized under all experimental conditions. Different minerals had different shock impedances; therefore, they provided different P-T conditions for identical impacts. Furthermore, the high pH of calcite promoted the racemization of valine. The results indicate that in natural hypervelocity impacts, amino acids in shocked oceanic water would have decomposed completely, since impact velocity and the duration of shock compression and heating are typically greater in hypervelocity impact events than those in experiments. Even with the shock wave by the impact of small and decelerated projectiles in which amino acids survive, the shock heating may generate sufficient heat for significant racemization in shocked oceanic water. However, the duration of shock induced heating by small projectiles is limited and the population of such decelerated projectiles would be limited. Therefore, even though impacts of asteroids and meteorites were frequent on the prebiotic Earth, impact events would not have significantly changed the ee of proteinogenic amino acids accumulated in the entire ocean.

The application of the European heat wave of 2003 to Korean cities to analyze impacts on heat-related mortality

Science.gov (United States)

Greene, J. Scott; Kalkstein, Laurence S.; Kim, Kyu Rang; Choi, Young-Jean; Lee, Dae-Geun

2016-02-01

The goal of this research is to transpose the unprecedented 2003 European excessive heat event to six Korean cities and to develop meteorological analogs for each. Since this heat episode is not a model but an actual event, we can use a plausible analog to assess the risk of increasing heat on these cities instead of an analog that is dependent on general circulation (GCM) modeling or the development of arbitrary scenarios. Initially, the 2003 summer meteorological conditions from Paris are characterized statistically and these characteristics are transferred to the Korean cites. Next, the new meteorological dataset for each Korean city is converted into a daily air mass calendar. We can then determine the frequency and character of "offensive" air masses in the Korean cities that are historically associated with elevated heat-related mortality. One unexpected result is the comparative severity of the very hot summer of 1994 in Korea, which actually eclipsed the 2003 analog. The persistence of the offensive air masses is considerably greater for the summer of 1994, as were dew point temperatures for a majority of the Korean cities. For all the Korean cities but one, the summer of 1994 is associated with more heat-related deaths than the analog summer, in some cases yielding a sixfold increase over deaths in an average summer. The Korean cities appear less sensitive to heat-related mortality problems during very hot summers than do large eastern and Midwestern US cities, possibly due to a lesser summer climate variation and efficient social services available during extreme heat episodes.

A passive emergency heat sink for water cooled reactors with particular application to CANDU reg-sign reactors

International Nuclear Information System (INIS)

Spinks, N.J.

1996-01-01

Water in an overhead pool can serve as a general-purpose passive emergency heat sink for water-cooled reactors. It can be used for containment cooling, for emergency depressurization of the heat transport-system, or to receive any other emergency heat, such as that from the CANDU reg-sign moderator. The passive emergency water system provides in-containment depressurization of steam generators and no other provision is needed for supply of low-pressure emergency water to the steam generators. For containment cooling, the pool supplies water to the tube side of elevated tube banks inside containment. The elevation with respect to the reactor heat source maximizes heat transport, by natural convection, of hot containment gases. This effective heat transport combines with the large heat-transfer coefficients of tube banks, to reduce containment overpressure during accidents. Cooled air from the tube banks is directed past the break in the heat-transport system, to facilitate removal of hydrogen using passive catalytic recombiners

Renewable heating: Perspectives and the impact of policy instruments

International Nuclear Information System (INIS)

Kranzl, Lukas; Hummel, Marcus; Müller, Andreas; Steinbach, Jan

2013-01-01

In the light of the EU directive for renewable energy (2009/28/EC) this paper deals with the question how various policy instruments could impact the development of renewable heating technologies. The paper applies the simulation model Invert/EE-Lab for the building related heat demand in selected European countries (Austria, Lithuania and United Kingdom). The resulting scenarios up to 2030 are compared to RES-Heat targets from literature, stakeholder consultation processes and the targets in the national renewable energy action plans submitted by EU Member States in 2010. The results demonstrate that use obligations for renewable heating can be effective in achieving RES-Heat market growth. However, in order to attain a balanced technology mix and more ambitious targets, policy packages are required combining use obligations with economic incentives and accompanying measures. Technology specific conclusions are derived. Moreover, conclusions indicate that the action plans are not always consistent with policy measures in place or under discussion. - Highlights: • Modeling of RES-Heat policies in the building sector. • Application of the model Invert/EE-Lab for the cases of AT, LT, UK. • RES-Heat use obligations are effective but should be integrated in policy packages. • The design of use obligations has substantial impact on the RES-H technology mix. • National renewable energy action plans are not always consistent with policies

Avoided heat-related mortality through climate adaptation strategies in three US cities.

Science.gov (United States)

Stone, Brian; Vargo, Jason; Liu, Peng; Habeeb, Dana; DeLucia, Anthony; Trail, Marcus; Hu, Yongtao; Russell, Armistead

2014-01-01

Heat-related mortality in US cities is expected to more than double by the mid-to-late 21st century. Rising heat exposure in cities is projected to result from: 1) climate forcings from changing global atmospheric composition; and 2) local land surface characteristics responsible for the urban heat island effect. The extent to which heat management strategies designed to lessen the urban heat island effect could offset future heat-related mortality remains unexplored in the literature. Using coupled global and regional climate models with a human health effects model, we estimate changes in the number of heat-related deaths in 2050 resulting from modifications to vegetative cover and surface albedo across three climatically and demographically diverse US metropolitan areas: Atlanta, Georgia, Philadelphia, Pennsylvania, and Phoenix, Arizona. Employing separate health impact functions for average warm season and heat wave conditions in 2050, we find combinations of vegetation and albedo enhancement to offset projected increases in heat-related mortality by 40 to 99% across the three metropolitan regions. These results demonstrate the potential for extensive land surface changes in cities to provide adaptive benefits to urban populations at risk for rising heat exposure with climate change.

Avoided heat-related mortality through climate adaptation strategies in three US cities.

Directory of Open Access Journals (Sweden)

Brian Stone

Full Text Available Heat-related mortality in US cities is expected to more than double by the mid-to-late 21st century. Rising heat exposure in cities is projected to result from: 1 climate forcings from changing global atmospheric composition; and 2 local land surface characteristics responsible for the urban heat island effect. The extent to which heat management strategies designed to lessen the urban heat island effect could offset future heat-related mortality remains unexplored in the literature. Using coupled global and regional climate models with a human health effects model, we estimate changes in the number of heat-related deaths in 2050 resulting from modifications to vegetative cover and surface albedo across three climatically and demographically diverse US metropolitan areas: Atlanta, Georgia, Philadelphia, Pennsylvania, and Phoenix, Arizona. Employing separate health impact functions for average warm season and heat wave conditions in 2050, we find combinations of vegetation and albedo enhancement to offset projected increases in heat-related mortality by 40 to 99% across the three metropolitan regions. These results demonstrate the potential for extensive land surface changes in cities to provide adaptive benefits to urban populations at risk for rising heat exposure with climate change.

Heat-Related Mortality in a Warming Climate: Projections for 12 U.S. Cities

Directory of Open Access Journals (Sweden)

Elisaveta P. Petkova

2014-10-01

Full Text Available Heat is among the deadliest weather-related phenomena in the United States, and the number of heat-related deaths may increase under a changing climate, particularly in urban areas. Regional adaptation planning is unfortunately often limited by the lack of quantitative information on potential future health responses. This study presents an assessment of the future impacts of climate change on heat-related mortality in 12 cities using 16 global climate models, driven by two scenarios of greenhouse gas emissions. Although the magnitude of the projected heat effects was found to differ across time, cities, climate models and greenhouse pollution emissions scenarios, climate change was projected to result in increases in heat-related fatalities over time throughout the 21st century in all of the 12 cities included in this study. The increase was more substantial under the high emission pathway, highlighting the potential benefits to public health of reducing greenhouse gas emissions. Nearly 200,000 heat-related deaths are projected to occur in the 12 cities by the end of the century due to climate warming, over 22,000 of which could be avoided if we follow a low GHG emission pathway. The presented estimates can be of value to local decision makers and stakeholders interested in developing strategies to reduce these impacts and building climate change resilience.

Heat-Related Mortality in a Warming Climate: Projections for 12 U.S. Cities

Science.gov (United States)

Petkova, Elisaveta P.; Bader, Daniel A.; Anderson, G. Brooke; Horton, Radley M.; Knowlton, Kim; Kinney, Patrick L.

2014-01-01

Heat is among the deadliest weather-related phenomena in the United States, and the number of heat-related deaths may increase under a changing climate, particularly in urban areas. Regional adaptation planning is unfortunately often limited by the lack of quantitative information on potential future health responses. This study presents an assessment of the future impacts of climate change on heat-related mortality in 12 cities using 16 global climate models, driven by two scenarios of greenhouse gas emissions. Although the magnitude of the projected heat effects was found to differ across time, cities, climate models and greenhouse pollution emissions scenarios, climate change was projected to result in increases in heat-related fatalities over time throughout the 21st century in all of the 12 cities included in this study. The increase was more substantial under the high emission pathway, highlighting the potential benefits to public health of reducing greenhouse gas emissions. Nearly 200,000 heat-related deaths are projected to occur in the 12 cities by the end of the century due to climate warming, over 22,000 of which could be avoided if we follow a low GHG emission pathway. The presented estimates can be of value to local decision makers and stakeholders interested in developing strategies to reduce these impacts and building climate change resilience.

Nuclear power plant with improved arrangements for the removal of post fission and emergency heating

International Nuclear Information System (INIS)

Buescher, E.; Vinzens, K.

1977-01-01

This is concerned with additional equipment for emergency heat removal in a sodium cooled reactor, which operates on failure of the post fission heat removal system. The space for pressure relieving spaces and concrete masses as heat sinks within the reactor cell is no longer required. In this nuclear power plant, a heat exchanger chain transmits heat and power: There is a first sodium circuit between pressure vessel and the first heat exchanger, a second one between the first and second heat excahngers, and a third (Steam) circuit with turbine, condenser and return pump. A fourth circuit connects the secondary side of the condenser with a cooling tower. There is a threee component heat excahgner in the primary circuit after the first heat exchanger, which is built around the first heat exchanger, and is sealed into an unloading space. This space is situated next to the reactor cell and is above the operating level of the sodium in the pressure vessel. It is connected to the cell by an upper duct, normally closed by a bursting disc, and by a lower duct. In the three comopnent heat exchanger, a liquid lead-bismuth eutectic mixture transmits the heat from sodium pipes to water pipes. In normal operation it is used for steam superheating or feedwater preheating. The three component heat exchanger bridges the first and second heat exchangers as an emergency heat exchanger. If in such a case the post fission heat removal has failed, the sodium evaporating in the pressure vessel flows into the unloading space and condenses on the ribs of the emergency heat exchanger. The post fission heat is fed by the water secondary medium directly into the tertiary circuit. The sodium condensate flows back from the unloading space via the lower duct into the reactor cell and maintains the emergency level there. (RW) 891 RW [de

Heat Stroke: A Medical Emergency Appearing in New Regions

Directory of Open Access Journals (Sweden)

Sofie Søndergaard Mørch

2017-01-01

Full Text Available Heat stroke is an acute, life-threatening emergency characterized clinically by elevated body temperature and central nervous system dysfunction. Early recognition and treatment including aggressive cooling and management of life-threatening systemic complications are essential to reduce morbidity and mortality. This case report describes two Danish patients diagnosed with heat stroke syndrome during a heat wave in the summer of 2014. Both patients were morbidly obese and had several predisposing illnesses. However since heat stroke is a rare condition in areas with temperate climate, they were not diagnosed until several days after admittance; hence treatment with cooling was delayed. Both patients were admitted to the intensive care unit, where they were treated with an external cooling device and received treatment for complications. Both cases ended fatally. As global warming continues, more heat waves will occur in previously cooler regions. Therefore it is important to raise awareness of heat stroke since outcome depends on early recognition and rapid cooling.

Changing population dynamics and uneven temperature emergence combine to exacerbate regional exposure to heat extremes under 1.5 °C and 2 °C of warming

Science.gov (United States)

Harrington, Luke J.; Otto, Friederike E. L.

2018-03-01

Understanding how continuing increases in global mean temperature will exacerbate societal exposure to extreme weather events is a question of profound importance. However, determining population exposure to the impacts of heat extremes at 1.5 °C and 2 °C of global mean warming requires not only (1) a robust understanding of the physical climate system response, but also consideration of (2) projected changes to overall population size, as well as (3) changes to where people will live in the future. This analysis introduces a new framework, adapted from studies of probabilistic event attribution, to disentangle the relative importance of regional climate emergence and changing population dynamics in the exposure to future heat extremes across multiple densely populated regions in Southern Asia and Eastern Africa (SAEA). Our results reveal that, when population is kept at 2015 levels, exposure to heat considered severe in the present decade across SAEA will increase by a factor of 4.1 (2.4-9.6) and 15.8 (5.0-135) under a 1.5°- and 2.0°-warmer world, respectively. Furthermore, projected population changes by the end of the century under an SSP1 and SSP2 scenario can further exacerbate these changes by a factor of 1.2 (1.0-1.3) and 1.5 (1.3-1.7), respectively. However, a large fraction of this additional risk increase is not related to absolute increases in population, but instead attributed to changes in which regions exhibit continued population growth into the future. Further, this added impact of population redistribution will be twice as significant after 2.0 °C of warming, relative to stabilisation at 1.5 °C, due to the non-linearity of increases in heat exposure. Irrespective of the population scenario considered, continued African population expansion will place more people in locations where emergent changes to future heat extremes are exceptionally severe.

Heat-related inpatient hospitalizations and emergency room visits among California residents, May-September, 2000-2010.

Data.gov (United States)

California Environmental Health Tracking Program — This dataset contains case counts, rates, and confidence intervals of heat-related inpatient hospitalizations and ED visits among California residents for the years...

Work-related heat stress concerns in automotive industries: a case study from Chennai, India.

Science.gov (United States)

Ayyappan, Ramalingam; Sankar, Sambandam; Rajkumar, Paramasivan; Balakrishnan, Kalpana

2009-11-11

Work-related heat stress assessments, the quantification of thermal loads and their physiological consequences have mostly been performed in non-tropical developed country settings. In many developing countries (many of which are also tropical), limited attempts have been made to create detailed job-exposure profiles for various sectors. We present here a case study from Chennai in southern India that illustrates the prevalence of work-related heat stress in multiple processes of automotive industries and the efficacy of relatively simple controls in reducing prevalence of the risk through longitudinal assessments. We conducted workplace heat stress assessments in automotive and automotive parts manufacturing units according to the protocols recommended by NIOSH, USA. Sites for measurements included indoor locations with process-generated heat exposure, indoor locations without direct process-generated heat exposure and outdoor locations. Nearly 400 measurements of heat stress were made over a four-year period at more than 100 locations within eight units involved with automotive or automotive parts manufacturing in greater Chennai metropolitan area. In addition, cross-sectional measurements were made in select processes of glass manufacturing and textiles to estimate relative prevalence of heat stress. Results indicate that many processes even in organised large-scale industries have yet to control heat stress-related hazards adequately. Upwards of 28% of workers employed in multiple processes were at risk of heat stress-related health impairment in the sectors assessed. Implications of longitudinal baseline data for assessing efficacy of interventions as well as modelling potential future impacts from climate change (through contributions from worker health and productivity impairments consequent to increases in ambient temperature) are described. The study re-emphasises the need for recognising heat stress as an important occupational health risk in both formal

Heat transfer calculations on the KNK II emergency cooling system

International Nuclear Information System (INIS)

Vossebrecker, H.; Groenefeld, G.

1976-12-01

The Licensing Authority had demanded that in case of the change of the KNK thermal core into a fast core the decay heat removal system must be improved by a diverse and spatially separated emergency cooling system. In order to meet this requirement an existing nitrogen system of the facility is extended in such a manner that the decay heat will be removed by a nitrogen flow passing through the gap between reactor vessel and guard vessel. The heat transport from the core to the vessel is accomplished by natural convection flow rates which are generated by density differences between the hot core subassemblies, the reflector subassemblies and other passages between the upper and the lower plenum. The calculations show that the maximum temperatures in the core do not reach the sodium boiling-point. The maximum vessel temperature is 673 deg. C. In this report the function of the emergency cooling system and the methods of calculation are described, the input data and the results are stated and it is shown that the calculated temperatures are conservative [de

Exertional heat illness: emerging concepts and advances in prehospital care.

Science.gov (United States)

Pryor, Riana R; Roth, Ronald N; Suyama, Joe; Hostler, David

2015-06-01

Exertional heat illness is a classification of disease with clinical presentations that are not always diagnosed easily. Exertional heat stroke is a significant cause of death in competitive sports, and the increasing popularity of marathons races and ultra-endurance competitions will make treating many heat illnesses more common for Emergency Medical Services (EMS) providers. Although evidence is available primarily from case series and healthy volunteer studies, the consensus for treating exertional heat illness, coupled with altered mental status, is whole body rapid cooling. Cold or ice water immersion remains the most effective treatment to achieve this goal. External thermometry is unreliable in the context of heat stress and direct internal temperature measurement by rectal or esophageal probes must be used when diagnosing heat illness and during cooling. With rapid recognition and implementation of effective cooling, most patients suffering from exertional heat stroke will recover quickly and can be discharged home with instructions to rest and to avoid heat stress and exercise for a minimum of 48 hours; although, further research pertaining to return to activity is warranted.

Strategies to Reduce the Harmful Effects of Extreme Heat Events: A Four-City Study

Directory of Open Access Journals (Sweden)

Jalonne L. White-Newsome

2014-02-01

Full Text Available Extreme heat events (EHEs are becoming more intense, more frequent and longer lasting in the 21st century. These events can disproportionately impact the health of low-income, minority, and urban populations. To better understand heat-related intervention strategies used by four U.S. cities, we conducted 73 semi-structured interviews with government and non-governmental organization leaders representing public health, general social services, emergency management, meteorology, and the environmental planning sectors in Detroit, MI; New York City, NY; Philadelphia, PA and Phoenix, AZ—cities selected for their diverse demographics, climates, and climate adaptation strategies. We identified activities these leaders used to reduce the harmful effects of heat for residents in their city, as well as the obstacles they faced and the approaches they used to evaluate these efforts. Local leaders provided a description of how local context (e.g., climate, governance and city structure impacted heat preparedness. Despite the differences among study cities, political will and resource access were critical to driving heat-health related programming. Upon completion of our interviews, we convened leaders in each city to discuss these findings and their ongoing efforts through day-long workshops. Our findings and the recommendations that emerged from these workshops could inform other local or national efforts towards preventing heat-related morbidity and mortality.

Thermal Sizing of Heat Exchanger Tubes for Air Natural Convective Cooling System of Emergency Cooling Tank

Energy Technology Data Exchange (ETDEWEB)

Kim, Myoung Jun; Lee, Hee Joon [Kookmin Univ., Seoul (Korea, Republic of); Moon, Joo Hyung; Bae, Youngmin; Kim, Youngin [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-05-15

For the long operation of secondary passive cooling system, however, water level goes down by evaporation in succession at emergency cooling tank. At the end there would be no place to dissipate heat from condensation heat exchanger. Therefore, steam cooling heat exchanger is put on the top of emergency cooling tank to maintain appropriate water level by collecting evaporating steam. Steam cooling heat exchanger is installed inside an air chimney and evaporated steam is cooled down by air natural convection. In this study, thermal sizing of steam cooling heat exchanger under air natural convection was conducted by TSCON program for the design of experimental setup as shown in Fig. 2. Thermal sizing of steam cooling heat exchanger tube under air natural convection was conducted by TSCON program for the design of experimental setup. 25 - 1' tubes which has a length 1687 mm was determined as steam cooling heat exchanger at 2 kW heat load and 100 liter water pool in emergency cooling tank (experimental limit condition). The corresponding width of two tubes is 50 mm and has 5 by 5 tube array for heat exchanger.

Thermal Sizing of Heat Exchanger Tubes for Air Natural Convective Cooling System of Emergency Cooling Tank

International Nuclear Information System (INIS)

Kim, Myoung Jun; Lee, Hee Joon; Moon, Joo Hyung; Bae, Youngmin; Kim, Youngin

2014-01-01

For the long operation of secondary passive cooling system, however, water level goes down by evaporation in succession at emergency cooling tank. At the end there would be no place to dissipate heat from condensation heat exchanger. Therefore, steam cooling heat exchanger is put on the top of emergency cooling tank to maintain appropriate water level by collecting evaporating steam. Steam cooling heat exchanger is installed inside an air chimney and evaporated steam is cooled down by air natural convection. In this study, thermal sizing of steam cooling heat exchanger under air natural convection was conducted by TSCON program for the design of experimental setup as shown in Fig. 2. Thermal sizing of steam cooling heat exchanger tube under air natural convection was conducted by TSCON program for the design of experimental setup. 25 - 1' tubes which has a length 1687 mm was determined as steam cooling heat exchanger at 2 kW heat load and 100 liter water pool in emergency cooling tank (experimental limit condition). The corresponding width of two tubes is 50 mm and has 5 by 5 tube array for heat exchanger

Impacts of the 2015 Heat Waves on Mortality in the Czech Republic—A Comparison with Previous Heat Waves

Czech Academy of Sciences Publication Activity Database

Urban, Aleš; Hanzlíková, Hana; Kyselý, Jan; Plavcová, Eva

2017-01-01

Roč. 14, č. 12 (2017), č. článku 1562. ISSN 1660-4601 R&D Projects: GA ČR(CZ) GA16-22000S Grant - others:AV ČR(CZ) MSM100421604 Program:Program na podporu mezinárodní spolupráce začínajících výzkumných pracovníků Institutional support: RVO:68378289 Keywords : heat-related mortality * heat-wave * excess heat factor * Central Europe Subject RIV: DG - Athmosphere Sciences, Meteorology OBOR OECD: Climatic research Impact factor: 2.101, year: 2016 http://www.mdpi.com/1660-4601/14/12/1562

The Impact of the Urban Heat Island during an Intense Heat Wave in Oklahoma City

Directory of Open Access Journals (Sweden)

Jeffrey B. Basara

2010-01-01

Full Text Available During late July and early August 2008, an intense heat wave occurred in Oklahoma City. To quantify the impact of the urban heat island (UHI in Oklahoma City on observed and apparent temperature conditions during the heat wave event, this study used observations from 46 locations in and around Oklahoma City. The methodology utilized composite values of atmospheric conditions for three primary categories defined by population and general land use: rural, suburban, and urban. The results of the analyses demonstrated that a consistent UHI existed during the study period whereby the composite temperature values within the urban core were approximately 0.5∘C warmer during the day than the rural areas and over 2∘C warmer at night. Further, when the warmer temperatures were combined with ambient humidity conditions, the composite values consistently revealed even warmer heat-related variables within the urban environment as compared with the rural zone.

Analysis of radiative heat transfer impact in cross-flow tube and fin heat exchangers

Directory of Open Access Journals (Sweden)

Hanuszkiewicz-Drapała Małgorzata

2016-03-01

Full Text Available A cross-flow, tube and fin heat exchanger of the water – air type is the subject of the analysis. The analysis had experimental and computational form and was aimed for evaluation of radiative heat transfer impact on the heat exchanger performance. The main element of the test facility was an enlarged recurrent segment of the heat exchanger under consideration. The main results of measurements are heat transfer rates, as well as temperature distributions on the surface of the first fin obtained by using the infrared camera. The experimental results have been next compared to computational ones coming from a numerical model of the test station. The model has been elaborated using computational fluid dynamics software. The computations have been accomplished for two cases: without radiative heat transfer and taking this phenomenon into account. Evaluation of the radiative heat transfer impact in considered system has been done by comparing all the received results.

Urban-hazard risk analysis: mapping of heat-related risks in the elderly in major Italian cities.

Science.gov (United States)

Morabito, Marco; Crisci, Alfonso; Gioli, Beniamino; Gualtieri, Giovanni; Toscano, Piero; Di Stefano, Valentina; Orlandini, Simone; Gensini, Gian Franco

2015-01-01

Short-term impacts of high temperatures on the elderly are well known. Even though Italy has the highest proportion of elderly citizens in Europe, there is a lack of information on spatial heat-related elderly risks. Development of high-resolution, heat-related urban risk maps regarding the elderly population (≥ 65). A long time-series (2001-2013) of remote sensing MODIS data, averaged over the summer period for eleven major Italian cities, were downscaled to obtain high spatial resolution (100 m) daytime and night-time land surface temperatures (LST). LST was estimated pixel-wise by applying two statistical model approaches: 1) the Linear Regression Model (LRM); 2) the Generalized Additive Model (GAM). Total and elderly population density data were extracted from the Joint Research Centre population grid (100 m) from the 2001 census (Eurostat source), and processed together using "Crichton's Risk Triangle" hazard-risk methodology for obtaining a Heat-related Elderly Risk Index (HERI). The GAM procedure allowed for improved daytime and night-time LST estimations compared to the LRM approach. High-resolution maps of daytime and night-time HERI levels were developed for inland and coastal cities. Urban areas with the hazardous HERI level (very high risk) were not necessarily characterized by the highest temperatures. The hazardous HERI level was generally localized to encompass the city-centre in inland cities and the inner area in coastal cities. The two most dangerous HERI levels were greater in the coastal rather than inland cities. This study shows the great potential of combining geospatial technologies and spatial demographic characteristics within a simple and flexible framework in order to provide high-resolution urban mapping of daytime and night-time HERI. In this way, potential areas for intervention are immediately identified with up-to-street level details. This information could support public health operators and facilitate coordination for heat-related

Urban-hazard risk analysis: mapping of heat-related risks in the elderly in major Italian cities.

Directory of Open Access Journals (Sweden)

Marco Morabito

Full Text Available Short-term impacts of high temperatures on the elderly are well known. Even though Italy has the highest proportion of elderly citizens in Europe, there is a lack of information on spatial heat-related elderly risks.Development of high-resolution, heat-related urban risk maps regarding the elderly population (≥ 65.A long time-series (2001-2013 of remote sensing MODIS data, averaged over the summer period for eleven major Italian cities, were downscaled to obtain high spatial resolution (100 m daytime and night-time land surface temperatures (LST. LST was estimated pixel-wise by applying two statistical model approaches: 1 the Linear Regression Model (LRM; 2 the Generalized Additive Model (GAM. Total and elderly population density data were extracted from the Joint Research Centre population grid (100 m from the 2001 census (Eurostat source, and processed together using "Crichton's Risk Triangle" hazard-risk methodology for obtaining a Heat-related Elderly Risk Index (HERI.The GAM procedure allowed for improved daytime and night-time LST estimations compared to the LRM approach. High-resolution maps of daytime and night-time HERI levels were developed for inland and coastal cities. Urban areas with the hazardous HERI level (very high risk were not necessarily characterized by the highest temperatures. The hazardous HERI level was generally localized to encompass the city-centre in inland cities and the inner area in coastal cities. The two most dangerous HERI levels were greater in the coastal rather than inland cities.This study shows the great potential of combining geospatial technologies and spatial demographic characteristics within a simple and flexible framework in order to provide high-resolution urban mapping of daytime and night-time HERI. In this way, potential areas for intervention are immediately identified with up-to-street level details. This information could support public health operators and facilitate coordination for heat-related

Impacts of Climate Modes on Air–Sea Heat Exchange in the Red Sea

KAUST Repository

Abualnaja, Yasser

2015-04-01

The impacts of various climate modes on the Red Sea surface heat exchange are investigated using the MERRA reanalysis and the OAFlux satellite reanalysis datasets. Seasonality in the atmospheric forcing is also explored. Mode impacts peak during boreal winter [December–February (DJF)] with average anomalies of 12–18 W m−2 to be found in the northern Red Sea. The North Atlantic Oscillation (NAO), the east Atlantic–west Russia (EAWR) pattern, and the Indian monsoon index (IMI) exhibit the strongest influence on the air–sea heat exchange during the winter. In this season, the largest negative anomalies of about −30 W m−2 are associated with the EAWR pattern over the central part of the Red Sea. In other seasons, mode-related anomalies are considerably lower, especially during spring when the mode impacts are negligible. The mode impacts are strongest over the northern half of the Red Sea during winter and autumn. In summer, the southern half of the basin is strongly influenced by the multivariate ENSO index (MEI). The winter mode–related anomalies are determined mostly by the latent heat flux component, while in summer the shortwave flux is also important. The influence of the modes on the Red Sea is found to be generally weaker than on the neighboring Mediterranean basin.

Analysis of impacting phenomena in a helically wound heat exchanger

International Nuclear Information System (INIS)

Whiston, G.S.; Jordan, R.W.

1986-01-01

During commissioning tests on a helically wound heat exchanger at Heysham Nuclear Power Station, evidence of impacting was observed on accelerometer responses. Impacting greatly enhances wear and methods have been developed to determine whether the operating lifetime of plant may be limited by tube failures. A theoretical frequency response function based on Timoshenko beam theory has been derived which relates an impact force to the acceleration field which propagates away from the impact site and is detected by remote accelerometers. The accuracy of this function has been verified experimentally and its suitability for the analysis of boiler responses has been demonstrated following investigations into the nature of impacting. Examples of the analysis of impact forces are given and methods of estimating wear are discussed. (author)

An Analysis of the Impact of Heat Waves in Labor and Crop Productivity in the Agricultural Sector in California

Science.gov (United States)

Castillo, F.; Wehner, M. F.; Gilless, J. K.

2017-12-01

California agriculture is an important economic activity for the state. California leads the nation in farms sales since 1950. In addition, agricultural employment in California reached approximately 410,000. Production of many fruits and vegetables is labor intensive and labor costs represent anywhere from 20% to 40% of total production costs. In additon, agricutlural production growth has been the highest for labor intensive crops such as berries (all types) and nuts. Given the importance of the agricultural sector and the labor component whithin it, the analysis of the impact of climate change on the agricultural sector of California becomes imperative. Heat waves are a weather related extreme that impact labor productivity, specially outdoor labor producitivity. We use crop production function analysis that incorporates socio economic variables such as crop prices, total acreage, production levels and harvest timiline with climate related variables such as an estimated Heat Index (HI) to analize the impact of heat waves on crop production via an impact on labor productivity for selected crops in the Central and Imperial Valleys in California. The analysis finds that the impact of heat waves varies by the degree of labor intensity of the crop and the relative intensity of the heat wave.

Calculations of combined radiation and convection heat transfer in rod bundles under emergency cooling conditions

International Nuclear Information System (INIS)

Sun, K.H.; Gonzalez-Santalo, J.M.; Tien, C.L.

1976-01-01

A model has been developed to calculate the heat transfer coefficients from the fuel rods to the steam-droplet mixture typical of Boiling Water Reactors under Emergency Core Cooling System (ECCS) operation conditions during a postulated loss-of-coolant accident. The model includes the heat transfer by convection to the vapor, the radiation from the surfaces to both the water droplets and the vapor, and the effects of droplet evaporation. The combined convection and radiation heat transfer coefficient can be evaluated with respect to the characteristic droplet size. Calculations of the heat transfer coefficient based on the droplet sizes obtained from the existing literature are consistent with those determined empirically from the Full-Length-Emergency-Cooling-Heat-Transfer (FLECHT) program. The present model can also be used to assess the effects of geometrical distortions (or deviations from nominal dimensions) on the heat transfer to the cooling medium in a rod bundle

Geographical differences on the mortality impact of heat waves in Europe

Directory of Open Access Journals (Sweden)

Sunyer Jordi

2010-07-01

Full Text Available Abstract Climate change is potentially the biggest global health threat in the 21st century. Deaths related with heat waves and spread of infectious diseases will be part of the menace though the major impact will be caused by malnutrition, diarrhea and extreme climate events. Consequently, loss of healthy life years as a result of global climate change is predicted to be 500 times greater in poor African populations than in European populations. However, the increase of more than 2°C of average temperature will result in a negative health impact in all regions, the potential benefits of a warmer temperature being negatively compensated, heat waves being one of the largest climate change threats in the developed world.

Heat Islands

Science.gov (United States)

EPA's Heat Island Effect Site provides information on heat islands, their impacts, mitigation strategies, related research, a directory of heat island reduction initiatives in U.S. communities, and EPA's Heat Island Reduction Program.

Quantifying Projected Heat Mortality Impacts under 21st-Century Warming Conditions for Selected European Countries.

Science.gov (United States)

Kendrovski, Vladimir; Baccini, Michela; Martinez, Gerardo Sanchez; Wolf, Tanja; Paunovic, Elizabet; Menne, Bettina

2017-07-05

Under future warming conditions, high ambient temperatures will have a significant impact on population health in Europe. The aim of this paper is to quantify the possible future impact of heat on population mortality in European countries, under different climate change scenarios. We combined the heat-mortality function estimated from historical data with meteorological projections for the future time laps 2035-2064 and 2071-2099, developed under the Representative Concentration Pathways (RCP) 4.5 and 8.5. We calculated attributable deaths (AD) at the country level. Overall, the expected impacts will be much larger than the impacts we would observe if apparent temperatures would remain in the future at the observed historical levels. During the period 2071-2099, an overall excess of 46,690 and 117,333 AD per year is expected under the RCP 4.5 and RCP 8.5 scenarios respectively, in addition to the 16,303 AD estimated under the historical scenario. Mediterranean and Eastern European countries will be the most affected by heat, but a non-negligible impact will be still registered in North-continental countries. Policies and plans for heat mitigation and adaptation are needed and urgent in European countries in order to prevent the expected increase of heat-related deaths in the coming decades.

Assessment of impact of borehole heat exchanger design on heat extraction/rejection efficiency

Directory of Open Access Journals (Sweden)

Gornov V.F.

2016-01-01

Full Text Available The article considers the impact of design of borehole heat exchanger (BHE as one of the main elements of a geothermal heat pump system on its efficiency in the ground heat extraction/rejection. Four BHE modifications are considered: coaxial with metal and polyethylene outside tube as well as single and double U-shaped structures of polyethylene tubes. Numerical modeling resulted to data on the efficiency of these BHE modifications for rejection heat into ground (heat pump system in cooling mode, and ground heat extraction (heat pump system in heating mode. Numerical values were obtained and BHEs were ranked according to their efficiency in both operation modes. Besides, additional calculations were made for the most common modification - double U-shaped design - in the ground heat extraction mode for various tube sizes with various wall thicknesses.

Heat-Related Illnesses

Medline Plus

Full Text Available ... Health System in Chesterfield, Missouri Heat-related illness can be caused by overexposure to the sun or ... the elderly are most at risk, but anyone can be affected. Here you will find information about ...

Impact of Euro Adoption on Emerging European Countries

Directory of Open Access Journals (Sweden)

Irena Vodenska

2013-01-01

Full Text Available We study the impact of the euro on emerging European countriesby investigating three country groups: (1 seventeen Eurozonecountries, (2 seven EU Eastern and Central European (ECEmembers using local currencies, and (3 six EU Candidates. Weanalyze macroeconomic indicators and propose models to investigatewhether similar or different indicators influence sovereigndebt for each group. We find that exports and unemployment arepositively related to sovereign debt while market capitalizationshows negative relation with sovereign debt. We argue that the recentEuropean sovereign debt crisis has raised serious challengesfor the Eurozone, and propose that EU ECE members and eu candidatesdelay the adoption of the euro.

Condensation heat transfer coefficient of air-cooled condensing heat exchanger of emergency cooldown tank in long-term passive cooling system

International Nuclear Information System (INIS)

Huh, Seon Jeong; Lee, Hee Joon; Moon, Joo Hyung; Bae, Youngmin; Kim, Young In

2017-01-01

For the design purpose of air-cooled condensing heat exchanger of emergency cooldown tank, average condensation heat transfer coefficient inside a circular tube was reduced by a thermal sizing program using the experimental data of Kim et al. It was compared to the existing condensation heat transfer correlations. Moreover, a sensitivity analysis of both inside condensation and outside air natural convection correlations was performed. Although condensation heat transfer did not play a great role to design over 10 3 W/m 2 /K, the improved Shah's correlation gives the best prediction for the design. Consequently, air natural convection coefficient significantly affects the design of air-cooled condensing heat exchanger. (author)

Impacts of Emerging Economies and Firms on International Business

DEFF Research Database (Denmark)

The internationalization of emerging economies has brought new perspectives to international business development. Focusing on the extensive impact these emerging economies and firms have had, this volume covers the strong players, such as Brazil, Russia, India and China, as well as dynamically d...... originating from emerging economies. It explores new horizons in international business development and addresses challenging perspectives.......The internationalization of emerging economies has brought new perspectives to international business development. Focusing on the extensive impact these emerging economies and firms have had, this volume covers the strong players, such as Brazil, Russia, India and China, as well as dynamically...

Heat demand profiles of energy conservation measures in buildings and their impact on a district heating system

International Nuclear Information System (INIS)

Lundström, Lukas; Wallin, Fredrik

2016-01-01

Highlights: • Energy savings impact on an low CO 2 emitting district heating system. • Heat profiles of eight building energy conservation measures. • Exhaust air heat pump, heat recovery ventilation, electricity savings etc. • Heat load weather normalisation with segmented multivariable linear regression. - Abstract: This study highlights the forthcoming problem with diminishing environmental benefits from heat demand reducing energy conservation measures (ECM) of buildings within district heating systems (DHS), as the supply side is becoming “greener” and more primary energy efficient. In this study heat demand profiles and annual electricity-to-heat factors of ECMs in buildings are computed and their impact on system efficiency and greenhouse gas emissions of a Swedish biomass fuelled and combined heat and power utilising DHS are assessed. A weather normalising method for the DHS heat load is developed, combining segmented multivariable linear regressions with typical meteorological year weather data to enable the DHS model and the buildings model to work under the same weather conditions. Improving the buildings’ envelope insulation level and thereby levelling out the DHS heat load curve reduces greenhouse gas emissions and improves primary energy efficiency. Reducing household electricity use proves to be highly beneficial, partly because it increases heat demand, allowing for more cogeneration of electricity. However the other ECMs considered may cause increased greenhouse gas emissions, mainly because of their adverse impact on the cogeneration of electricity. If biomass fuels are considered as residuals, and thus assigned low primary energy factors, primary energy efficiency decreases when implementing ECMs that lower heat demand.

The impact of heat waves on mortality in 9 European cities: results from the EuroHEAT project.

Science.gov (United States)

D'Ippoliti, Daniela; Michelozzi, Paola; Marino, Claudia; de'Donato, Francesca; Menne, Bettina; Katsouyanni, Klea; Kirchmayer, Ursula; Analitis, Antonis; Medina-Ramón, Mercedes; Paldy, Anna; Atkinson, Richard; Kovats, Sari; Bisanti, Luigi; Schneider, Alexandra; Lefranc, Agnès; Iñiguez, Carmen; Perucci, Carlo A

2010-07-16

The present study aimed at developing a standardized heat wave definition to estimate and compare the impact on mortality by gender, age and death causes in Europe during summers 1990-2004 and 2003, separately, accounting for heat wave duration and intensity. Heat waves were defined considering both maximum apparent temperature and minimum temperature and classified by intensity, duration and timing during summer. The effect was estimated as percent increase in daily mortality during heat wave days compared to non heat wave days in people over 65 years. City specific and pooled estimates by gender, age and cause of death were calculated. The effect of heat waves showed great geographical heterogeneity among cities. Considering all years, except 2003, the increase in mortality during heat wave days ranged from + 7.6% in Munich to + 33.6% in Milan. The increase was up to 3-times greater during episodes of long duration and high intensity. Pooled results showed a greater impact in Mediterranean (+ 21.8% for total mortality) than in North Continental (+ 12.4%) cities. The highest effect was observed for respiratory diseases and among women aged 75-84 years. In 2003 the highest impact was observed in cities where heat wave episode was characterized by unusual meteorological conditions. Climate change scenarios indicate that extreme events are expected to increase in the future even in regions where heat waves are not frequent. Considering our results prevention programs should specifically target the elderly, women and those suffering from chronic respiratory disorders, thus reducing the impact on mortality.

The impact of heat waves on mortality in 9 European cities: results from the EuroHEAT project

Directory of Open Access Journals (Sweden)

Bisanti Luigi

2010-07-01

Full Text Available Abstract Background The present study aimed at developing a standardized heat wave definition to estimate and compare the impact on mortality by gender, age and death causes in Europe during summers 1990-2004 and 2003, separately, accounting for heat wave duration and intensity. Methods Heat waves were defined considering both maximum apparent temperature and minimum temperature and classified by intensity, duration and timing during summer. The effect was estimated as percent increase in daily mortality during heat wave days compared to non heat wave days in people over 65 years. City specific and pooled estimates by gender, age and cause of death were calculated. Results The effect of heat waves showed great geographical heterogeneity among cities. Considering all years, except 2003, the increase in mortality during heat wave days ranged from + 7.6% in Munich to + 33.6% in Milan. The increase was up to 3-times greater during episodes of long duration and high intensity. Pooled results showed a greater impact in Mediterranean (+ 21.8% for total mortality than in North Continental (+ 12.4% cities. The highest effect was observed for respiratory diseases and among women aged 75-84 years. In 2003 the highest impact was observed in cities where heat wave episode was characterized by unusual meteorological conditions. Conclusions Climate change scenarios indicate that extreme events are expected to increase in the future even in regions where heat waves are not frequent. Considering our results prevention programs should specifically target the elderly, women and those suffering from chronic respiratory disorders, thus reducing the impact on mortality.

Urban-Hazard Risk Analysis: Mapping of Heat-Related Risks in the Elderly in Major Italian Cities

Science.gov (United States)

Morabito, Marco; Crisci, Alfonso; Gioli, Beniamino; Gualtieri, Giovanni; Toscano, Piero; Di Stefano, Valentina; Orlandini, Simone; Gensini, Gian Franco

2015-01-01

Background Short-term impacts of high temperatures on the elderly are well known. Even though Italy has the highest proportion of elderly citizens in Europe, there is a lack of information on spatial heat-related elderly risks. Objectives Development of high-resolution, heat-related urban risk maps regarding the elderly population (≥65). Methods A long time-series (2001–2013) of remote sensing MODIS data, averaged over the summer period for eleven major Italian cities, were downscaled to obtain high spatial resolution (100 m) daytime and night-time land surface temperatures (LST). LST was estimated pixel-wise by applying two statistical model approaches: 1) the Linear Regression Model (LRM); 2) the Generalized Additive Model (GAM). Total and elderly population density data were extracted from the Joint Research Centre population grid (100 m) from the 2001 census (Eurostat source), and processed together using “Crichton’s Risk Triangle” hazard-risk methodology for obtaining a Heat-related Elderly Risk Index (HERI). Results The GAM procedure allowed for improved daytime and night-time LST estimations compared to the LRM approach. High-resolution maps of daytime and night-time HERI levels were developed for inland and coastal cities. Urban areas with the hazardous HERI level (very high risk) were not necessarily characterized by the highest temperatures. The hazardous HERI level was generally localized to encompass the city-centre in inland cities and the inner area in coastal cities. The two most dangerous HERI levels were greater in the coastal rather than inland cities. Conclusions This study shows the great potential of combining geospatial technologies and spatial demographic characteristics within a simple and flexible framework in order to provide high-resolution urban mapping of daytime and night-time HERI. In this way, potential areas for intervention are immediately identified with up-to-street level details. This information could support public

75 FR 8791 - Continuation of the National Emergency Relating to Cuba and of the Emergency Authority Relating...

Science.gov (United States)

2010-02-25

... to Cuba and of the Emergency Authority Relating to the Regulation of the Anchorage and Movement of... February 23, 2010 Continuation of the National Emergency Relating to Cuba and of the Emergency Authority....-registered civilian aircraft in international airspace north of Cuba. On February 26, 2004, by Proclamation...

Heat exchange apparatus

International Nuclear Information System (INIS)

Thurston, G.C.; McDaniels, J.D.; Gertsch, P.R.

1979-01-01

The present invention relates to heat exchangers used for transferring heat from the gas cooled core of a nuclear reactor to a secondary medium during standby and emergency conditions. The construction of the heat exchanger described is such that there is a minimum of welds exposed to the reactor coolant, the parasitic heat loss during normal operation of the reactor is minimized and the welds and heat transfer tubes are easily inspectable. (UK)

A biometeorology study of climate and heat-related morbidity in Phoenix from 2001 to 2006

Science.gov (United States)

Golden, Jay S.; Hartz, Donna; Brazel, Anthony; Luber, George; Phelan, Patrick

2008-07-01

Heat waves kill more people in the United States than hurricanes, tornadoes, earthquakes, and floods combined. Recently, international attention focused on the linkages and impacts of human health vulnerability to urban climate when Western Europe experienced over 30,000 excess deaths during the heat waves of the summer of 2003—surpassing the 1995 heat wave in Chicago, Illinois, that killed 739. While Europe dealt with heat waves, in the United States, Phoenix, Arizona, established a new all-time high minimum temperature for the region on July 15, 2003. The low temperature of 35.5°C (96°F) was recorded, breaking the previous all-time high minimum temperature record of 33.8°C (93°F). While an extensive literature on heat-related mortality exists, greater understanding of influences of heat-related morbidity is required due to climate change and rapid urbanization influences. We undertook an analysis of 6 years (2001 2006) of heat-related dispatches through the Phoenix Fire Department regional dispatch center to examine temporal, climatic and other non-spatial influences contributing to high-heat-related medical dispatch events. The findings identified that there were no significant variations in day-of-week dispatch events. The greatest incidence of heat-related medical dispatches occurred between the times of peak solar irradiance and maximum diurnal temperature, and during times of elevated human comfort indices (combined temperature and relative humidity).

Climate change projections of heat stress in Europe: From meteorological variables to impacts on productivity

Science.gov (United States)

Casanueva, Ana; Kotlarski, Sven; Liniger, Mark A.

2017-04-01

Future climate change is likely to have important impacts in many socio-economic sectors. In particular, higher summer temperatures or more prolonged heat waves may be responsible for health problems and productivity losses related to heat stress, especially affecting people exposed to such situations (e.g. working under outside settings or in non-acclimatized workplaces). Heat stress on the body under work load and consequently their productivity loss can be described through heat stress indices that are based on multiple meteorological parameters such as temperature, humidity, wind and radiation. Exploring the changes of these variables under a warmer climate is of prime importance for the Impacts, Adaptation and Vulnerability communities. In particular, the H2020 project HEAT-SHIELD aims at analyzing the impact of climate change on heat stress in strategic industries in Europe (manufacturing, construction, transportation, tourism and agriculture) within an inter-sectoral framework (climate scientists, biometeorologists, physiologists and stakeholders). In the present work we explore present and future heat stress over Europe using an ensemble of the state-of-the-art RCMs from the EURO-CORDEX initiative. Since RCMs cannot be directly used in impact studies due to their partly substantial biases, a standard bias correction method (empirical quantile mapping) is applied to correct the individual variables that are then used to derive heat stress indices. The objectives of this study are twofold, 1) to test the ability of the separately bias corrected variables to reproduce the main characteristics of heat stress indices in present climate conditions and 2) to explore climate change projections of heat stress indices. We use the wet bulb globe temperature (WBGT) as primary heat stress index, considering two different versions for indoor (or in the shade, based on temperature and humidity conditions) and outdoor settings (including also wind and radiation). The WBGT

Estimating population heat exposure and impacts on working people in conjunction with climate change

Science.gov (United States)

Kjellstrom, Tord; Freyberg, Chris; Lemke, Bruno; Otto, Matthias; Briggs, David

2018-03-01

Increased environmental heat levels as a result of climate change present a major challenge to the health, wellbeing and sustainability of human communities in already hot parts of this planet. This challenge has many facets from direct clinical health effects of daily heat exposure to indirect effects related to poor air quality, poor access to safe drinking water, poor access to nutritious and safe food and inadequate protection from disease vectors and environmental toxic chemicals. The increasing environmental heat is a threat to environmental sustainability. In addition, social conditions can be undermined by the negative effects of increased heat on daily work and life activities and on local cultural practices. The methodology we describe can be used to produce quantitative estimates of the impacts of climate change on work activities in countries and local communities. We show in maps the increasing heat exposures in the shade expressed as the occupational heat stress index Wet Bulb Globe Temperature. Some tropical and sub-tropical areas already experience serious heat stress, and the continuing heating will substantially reduce work capacity and labour productivity in widening parts of the world. Southern parts of Europe and the USA will also be affected. Even the lowest target for climate change (average global temperature change = 1.5 °C at representative concentration pathway (RCP2.6) will increase the loss of daylight work hour output due to heat in many tropical areas from less than 2% now up to more than 6% at the end of the century. A global temperature change of 2.7 °C (at RCP6.0) will double this annual heat impact on work in such areas. Calculations of this type of heat impact at country level show that in the USA, the loss of work capacity in moderate level work in the shade will increase from 0.17% now to more than 1.3% at the end of the century based on the 2.7 °C temperature change. The impact is naturally mainly occurring in the southern

Invader Relative Impact Potential: a new metric to understand and predict the ecological impacts of existing, emerging and future invasive alien species

OpenAIRE

Dick, JTA; Laverty, C; Lennon, JJ; Barrios-O'Neill, D; Mensink, PJ; Britton, JR; Medoc, V; Boets, P; Alexander, ME; Taylor, NG; Dunn, AM; Hatcher, MJ; Rosewarne, PJ; Crookes, S; MacIsaac, HJ

2017-01-01

1. Predictions of the identities and ecological impacts of invasive alien species are critical for risk assessment, but presently we lack universal and standardized metrics that reliably predict the likelihood and degree of impact of such invaders (i.e. measurable changes in populations of affected species). This need is especially pressing for emerging and potential future invaders that have no invasion history. Such a metric would also ideally apply across diverse taxonomic and trophic gro...

Effects on Public Health of Heat Waves to Improve the Urban Quality of Life

Directory of Open Access Journals (Sweden)

Vito Telesca

2018-04-01

Full Text Available Life satisfaction has been widely used in recent studies to evaluate the effect of environmental factors on individuals’ well-being. In the last few years, many studies have shown that the potential impact of climate change on cities depends on a variety of social, economic, and environmental determinants. In particular, extreme events, such as flood and heat waves, may cause more severe impacts and induce a relatively higher level of vulnerability in populations that live in urban areas. Therefore, the impact of climate change and related extreme events certainly influences the economy and quality of life in affected cities. Heat wave frequency, intensity, and duration are increasing in global and local climate change scenarios. The association between high temperatures and morbidity is well-documented, but few studies have examined the role of meteo-climatic variables on hospital admissions. This study investigates the effects of temperature, relative humidity, and barometric pressure on health by linking daily access to a Matera (Italy hospital with meteorological conditions in summer 2012. Extreme heat wave episodes that affected most of the city from 1 June to 31 August 2012 (among the selected years 2003, 2012, and 2017 were analyzed. Results were compared with heat waves from other years included in the base period (1971–2000 and the number of emergency hospital admissions on each day was considered. The meteorological data used in this study were collected from two weather stations in Matera. In order to detect correlations between the daily emergency admissions and the extreme health events, a combined methodology based on a heat wave identification technique, multivariate analysis (PCA, and regression analysis was applied. The results highlight that the role of relative humidity decreases as the severity level of heat waves increases. Moreover, the combination of temperatures and daily barometric pressure range (DPR has been

Early emergence of anthropogenically forced heat waves in the western United States and Great Lakes

Science.gov (United States)

Lopez, Hosmay; West, Robert; Dong, Shenfu; Goni, Gustavo; Kirtman, Ben; Lee, Sang-Ki; Atlas, Robert

2018-05-01

Climate projections for the twenty-first century suggest an increase in the occurrence of heat waves. However, the time at which externally forced signals of anthropogenic climate change (ACC) emerge against background natural variability (time of emergence (ToE)) has been challenging to quantify, which makes future heat-wave projections uncertain. Here we combine observations and model simulations under present and future forcing to assess how internal variability and ACC modulate US heat waves. We show that ACC dominates heat-wave occurrence over the western United States and Great Lakes regions, with ToE that occurred as early as the 2020s and 2030s, respectively. In contrast, internal variability governs heat waves in the northern and southern Great Plains, where ToE occurs in the 2050s and 2070s; this later ToE is believed to be a result of a projected increase in circulation variability, namely the Great Plain low-level jet. Thus, greater mitigation and adaptation efforts are needed in the Great Lakes and western United States regions.

The impacts of groundwater heat pumps on urban shallow ...

African Journals Online (AJOL)

DR TONUKARI NYEROVWO

2011-07-25

Jul 25, 2011 ... In order to assess the impacts of groundwater heat pumps on urban shallow groundwater ... thermal transfer systems that use the ground water as a ... Abbreviations: GWHPs, Groundwater heat pumps; GHGs, ... Areas (Mm2).

The Impact of Heat Waves on Occurrence and Severity of Construction Accidents.

Science.gov (United States)

Rameezdeen, Rameez; Elmualim, Abbas

2017-01-11

The impact of heat stress on human health has been extensively studied. Similarly, researchers have investigated the impact of heat stress on workers' health and safety. However, very little work has been done on the impact of heat stress on occupational accidents and their severity, particularly in South Australian construction. Construction workers are at high risk of injury due to heat stress as they often work outdoors, undertake hard manual work, and are often project based and sub-contracted. Little is known on how heat waves could impact on construction accidents and their severity. In order to provide more evidence for the currently limited number of empirical investigations on the impact of heat stress on accidents, this study analysed 29,438 compensation claims reported during 2002-2013 within the construction industry of South Australia. Claims reported during 29 heat waves in Adelaide were compared with control periods to elicit differences in the number of accidents reported and their severity. The results revealed that worker characteristics, type of work, work environment, and agency of accident mainly govern the severity. It is recommended that the implementation of adequate preventative measures in small-sized companies and civil engineering sites, targeting mainly old age workers could be a priority for Work, Health and Safety (WHS) policies.

The Impact of Heat Waves on Occurrence and Severity of Construction Accidents

Science.gov (United States)

Rameezdeen, Rameez; Elmualim, Abbas

2017-01-01

The impact of heat stress on human health has been extensively studied. Similarly, researchers have investigated the impact of heat stress on workers’ health and safety. However, very little work has been done on the impact of heat stress on occupational accidents and their severity, particularly in South Australian construction. Construction workers are at high risk of injury due to heat stress as they often work outdoors, undertake hard manual work, and are often project based and sub-contracted. Little is known on how heat waves could impact on construction accidents and their severity. In order to provide more evidence for the currently limited number of empirical investigations on the impact of heat stress on accidents, this study analysed 29,438 compensation claims reported during 2002–2013 within the construction industry of South Australia. Claims reported during 29 heat waves in Adelaide were compared with control periods to elicit differences in the number of accidents reported and their severity. The results revealed that worker characteristics, type of work, work environment, and agency of accident mainly govern the severity. It is recommended that the implementation of adequate preventative measures in small-sized companies and civil engineering sites, targeting mainly old age workers could be a priority for Work, Health and Safety (WHS) policies. PMID:28085067

Relation between source term and emergency planning for nuclear power plants

International Nuclear Information System (INIS)

Shi Zhongqi; Yang Ling

1992-01-01

Some background information of the severe accidents and source terms related to the nuclear power plant emergency planning are presented. The new source term information in NUREG-0956 and NUREG-1150, and possible changes in emergency planning requirements in U.S.A. are briefly provided. It is suggested that a principle is used in selecting source terms for establishing the emergency planning policy and a method is used in determining the Emergency Planning Zone (EPZ) size in China. Based on the research results of (1) EPZ size of PWR nuclear power plants being built in China, and (2) impact of reactor size and selected source terms on the EPZ size, it is concluded that the suggested principle and the method are suitable and feasible for PWR nuclear power plants in China

The impact of heat waves on electricity spot markets

International Nuclear Information System (INIS)

Pechan, Anna; Eisenack, Klaus

2014-01-01

Thermoelectric power plants depend on cooling water drawn from water bodies. Low river run-off and/or high water temperatures limit a plant's production capacity. This problem may intensify with climate change. Our study quantifies the impact of forced capacity reductions on market prices, production costs, consumer and producer surplus, as well as emissions by means of a bottom-up power generation system model. First, we simulate the German electricity spot market during the heat wave of 2006. Then we conduct a sensitivity study that accounts for future climatic and technological conditions. We find an average price increase of 11% during the heat wave 2006, which is even more pronounced during times of peak demand. Production costs accumulate to an additional but moderate 16 m. Due to the price increase, producers gain from the heat wave, whereas consumers disproportionately bear the costs. Carbon emissions in the German electricity sector increase during the heat wave. The price and cost effects are more pronounced and increase significantly if assumptions on heat-sensitive demand, hydropower capacity, net exports, and capacity reductions are tightened. These are potential additional effects of climate change. Hence, if mitigation fails or is postponed globally, the impacts on the current energy system are very likely to rise. Increases in feed-in from renewable resources and demand-side management can counter the effects to a considerable degree. Countries with a shift toward a renewable energy supply can be expected to be much less susceptible to cooling water scarcity than those with a high share of nuclear and coal-fired power plants. - Highlights: • We quantify the impact of thermal capacity reductions on the electricity market. • German heat wave 2006 caused moderate rise in production costs. • Capacity reductions have substantial impact on prices and raise producer surplus. • Impacts on prices, production cost and surplus amplify under climate

Heat, Human Performance, and Occupational Health: A Key Issue for the Assessment of Global Climate Change Impacts.

Science.gov (United States)

Kjellstrom, Tord; Briggs, David; Freyberg, Chris; Lemke, Bruno; Otto, Matthias; Hyatt, Olivia

2016-01-01

Ambient heat exposure is a well-known health hazard, which reduces human performance and work capacity at heat levels already common in tropical and subtropical areas. Various health problems have been reported. Increasing heat exposure during the hottest seasons of each year is a key feature of global climate change. Heat exhaustion and reduced human performance are often overlooked in climate change health impact analysis. Later this century, many among the four billion people who live in hot areas worldwide will experience significantly reduced work capacity owing to climate change. In some areas, 30-40% of annual daylight hours will become too hot for work to be carried out. The social and economic impacts will be considerable, with global gross domestic product (GDP) losses greater than 20% by 2100. The analysis to date is piecemeal. More analysis of climate change-related occupational health impact assessments is greatly needed.

Identifying heat-related deaths by using medical examiner and vital statistics data: Surveillance analysis and descriptive epidemiology - Oklahoma, 1990-2011.

Science.gov (United States)

Johnson, Matthew G; Brown, Sheryll; Archer, Pam; Wendelboe, Aaron; Magzamen, Sheryl; Bradley, Kristy K

2016-10-01

Approximately 660 deaths occur annually in the United States associated with excess natural heat. A record heat wave in Oklahoma during 2011 generated increased interest concerning heat-related mortality among public health preparedness partners. We aimed to improve surveillance for heat-related mortality and better characterize heat-related deaths in Oklahoma during 1990-2011, and to enhance public health messaging during future heat emergencies. Heat-related deaths were identified by querying vital statistics (VS) and medical examiner (ME) data during 1990-2011. Case inclusion criteria were developed by using heat-related International Classification of Diseases codes, cause-of-death nomenclature, and ME investigation narrative. We calculated sensitivity and predictive value positive (PVP) for heat-related mortality surveillance by using VS and ME data and performed a descriptive analysis. During the study period, 364 confirmed and probable heat-related deaths were identified when utilizing both data sets. ME reports had 87% sensitivity and 74% PVP; VS reports had 80% sensitivity and 52% PVP. Compared to Oklahoma's general population, decedents were disproportionately male (67% vs. 49%), aged ≥65 years (46% vs. 14%), and unmarried (78% vs. 47%). Higher rates of heat-related mortality were observed among Blacks. Of 95 decedents with available information, 91 (96%) did not use air conditioning. Linking ME and VS data sources together and using narrative description for case classification allows for improved case ascertainment and surveillance data quality. Males, Blacks, persons aged ≥65 years, unmarried persons, and those without air conditioning carry a disproportionate burden of the heat-related deaths in Oklahoma. Published by Elsevier Inc.

Impact of Next Generation District Heating Systems on Distribution Network Heat Losses: A Case Study Approach

Science.gov (United States)

Li, Yu; Rezgui, Yacine

2018-01-01

District heating (DH) is a promising energy pathway to alleviate environmental negative impacts induced by fossil fuels. Improving the performance of DH systems is one of the major challenges facing its wide adoption. This paper discusses the heat losses of the next generation DH based on the constructed Simulink model. Results show that lower distribution temperature and advanced insulation technology greatly reduce network heat losses. Also, the network heat loss can be further minimized by a reduction of heat demand in buildings.

The Impact of Heat Waves on Occurrence and Severity of Construction Accidents

Directory of Open Access Journals (Sweden)

Rameez Rameezdeen

2017-01-01

Full Text Available The impact of heat stress on human health has been extensively studied. Similarly, researchers have investigated the impact of heat stress on workers’ health and safety. However, very little work has been done on the impact of heat stress on occupational accidents and their severity, particularly in South Australian construction. Construction workers are at high risk of injury due to heat stress as they often work outdoors, undertake hard manual work, and are often project based and sub-contracted. Little is known on how heat waves could impact on construction accidents and their severity. In order to provide more evidence for the currently limited number of empirical investigations on the impact of heat stress on accidents, this study analysed 29,438 compensation claims reported during 2002–2013 within the construction industry of South Australia. Claims reported during 29 heat waves in Adelaide were compared with control periods to elicit differences in the number of accidents reported and their severity. The results revealed that worker characteristics, type of work, work environment, and agency of accident mainly govern the severity. It is recommended that the implementation of adequate preventative measures in small-sized companies and civil engineering sites, targeting mainly old age workers could be a priority for Work, Health and Safety (WHS policies.

Emergency building temperature restrictions. Final evaluation

Energy Technology Data Exchange (ETDEWEB)

None

1980-11-01

On July 5, 1979, DOE promulgated final regulations of the Emergency Building Temperature Restrictions program, placing emergency restrictions on thermostat settings for space heating, space cooling, and hot water in commercial, industrial, and nonresidential public buildings. The final regulations restricted space heating to a maximum of 65/sup 0/F, hot water temperature to a maximum of 105/sup 0/F, and cooling temperature to a minimum of 78/sup 0/F. A comprehensive evaluation of the entire EBTF program for a nine-month period from July 16, 1979 is presented. In Chapter 1, an estimate of the population of buildings covered by EBTR is presented. In Chapter 2, EBTR compliance by building type and region is reported. Exemptions are also discussed. In Chapter 3, the simulations of building energy use are explained and the relative impact of various building characteristics and effectiveness of different control strategies are estimated. Finally, in Chapter 4, the methodology for scaling the individual building energy savings to the national level is described, and estimated national energy savings are presented.

Emergence of acoustic waves from vorticity fluctuations: impact of non-normality.

Science.gov (United States)

George, Joseph; Sujith, R I

2009-10-01

Chagelishvili et al. [Phys. Rev. Lett. 79, 3178 (1997)] discovered a linear mechanism of acoustic wave emergence from vorticity fluctuations in shear flows. This paper illustrates how this "nonresonant" phenomenon is related to the non-normality of the operator governing the linear dynamics of disturbances in shear flows. The non-self-adjoint nature of the governing operator causes the emergent acoustic wave to interact strongly with the vorticity disturbance. Analytical expressions are obtained for the nondivergent vorticity perturbation. A discontinuity in the x component of the velocity field corresponding to the vorticity disturbance was originally identified to be the cause of acoustic wave emergence. However, a different mechanism is proposed in this paper. The correct "acoustic source" is identified and the reason for the abrupt nature of wave emergence is explained. The impact of viscous damping is also discussed.

The impact of heat waves on surface urban heat island and local economy in Cluj-Napoca city, Romania

Science.gov (United States)

Herbel, Ioana; Croitoru, Adina-Eliza; Rus, Adina Viorica; Roşca, Cristina Florina; Harpa, Gabriela Victoria; Ciupertea, Antoniu-Flavius; Rus, Ionuţ

2017-07-01

The association between heat waves and the urban heat island effect can increase the impact on environment and society inducing biophysical hazards. Heat stress and their associated public health problems are among the most frequent. This paper explores the heat waves impact on surface urban heat island and on the local economy loss during three heat periods in Cluj-Napoca city in the summer of 2015. The heat wave events were identified based on daily maximum temperature, and they were divided into three classes considering the intensity threshold: moderate heat waves (daily maximum temperature exceeding the 90th percentile), severe heat waves (daily maximum temperature over the 95th percentile), and extremely severe heat waves (daily maximum temperature exceeding the 98th percentile). The minimum length of an event was of minimum three consecutive days. The surface urban heat island was detected based on land surface temperature derived from Landsat 8 thermal infrared data, while the economic impact was estimated based on data on work force structure and work productivity in Cluj-Napoca derived from the data released by Eurostat, National Bank of Romania, and National Institute of Statistics. The results indicate that the intensity and spatial extension of surface urban heat island could be governed by the magnitude of the heat wave event, but due to the low number of satellite images available, we should consider this information only as preliminary results. Thermal infrared remote sensing has proven to be a very efficient method to study surface urban heat island, due to the fact that the synoptic conditions associated with heat wave events usually favor cloud free image. The resolution of the OLI_TIRS sensor provided good results for a mid-extension city, but the low revisiting time is still a drawback. The potential economic loss was calculated for the working days during heat waves and the estimated loss reached more than 2.5 mil. EUR for each heat wave day

Osteopathic emergency medicine programs infrequently publish in high-impact emergency medicine journals.

Science.gov (United States)

Baskin, Sean M; Lin, Christina; Carlson, Jestin N

2014-11-01

Both the Accreditation Council for Graduate Medical Education (ACGME) and the American Osteopathic Association (AOA) require core faculty to engage in scholarly work, including publication in peer-reviewed journals. With the ACGME/AOA merger, we sought to evaluate the frequency of publication in high-impact peer-reviewed EM journals from authors affiliated with osteopathic emergency medicine (EM) programs. We performed a retrospective literature review using the Journal Citation Report database and identified the top five journals in the category of 'Emergency Medicine' by their 2011 Impact Factor. We examined all publications from each journal for 2011. For each article we recorded article type, authors' names, position of authorship (first, senior or other), the author's degree and affiliated institution. We present the data in raw numbers and percentages. The 2011 EM journals with the highest impact factor were the following: Annals of Emergency Medicine, Resuscitation, Journal of Trauma, Injury, and Academic Emergency Medicine. Of the 9,298 authors published in these journals in 2011; 1,309 (15%) claimed affiliation with U.S.-based EM programs, of which 16 (1%) listed their affiliations with eight different osteopathic EM programs. The 16 authors claimed affiliation with 8 of 46 osteopathic EM programs (17%), while 1,301 authors claimed affiliation with 104 of 148 (70%) U.S.-based allopathic programs. Authors from osteopathic EM programs are under-represented in the top EM journals. With the pending ACGME/AOA merger, there is a significant opportunity for improvement in the rate of publication of osteopathic EM programs in top tier EM journals.

Projected heat-related mortality under climate change in the metropolitan area of Skopje

Directory of Open Access Journals (Sweden)

Gerardo Sanchez Martinez

2016-05-01

Full Text Available Abstract Background Excessive summer heat is a serious environmental health problem in Skopje, the capital and largest city of the former Yugoslav Republic of Macedonia. This paper attempts to forecast the impact of heat on mortality in Skopje in two future periods under climate change and compare it with a historical baseline period. Methods After ascertaining the relationship between daily mean ambient air temperature and daily mortality in Skopje, we modelled the evolution of ambient temperatures in the city under a Representative Concentration Pathway scenario (RCP8.5 and the evolution of the city population in two future time periods: 2026–2045 and 2081–2100, and in a past time period (1986–2005 to serve as baseline for comparison. We then calculated the projected average annual mortality attributable to heat in the absence of adaptation or acclimatization during those time windows, and evaluated the contribution of each source of uncertainty on the final impact. Results Our estimates suggest that, compared to the baseline period (1986–2005, heat-related mortality in Skopje would more than double in 2026–2045, and more than quadruple in 2081–2100. When considering the impact in 2081–2100, sampling variability around the heat–mortality relationship and climate model explained 40.3 and 46.6 % of total variability. Conclusion These results highlight the importance of a long-term perspective in the public health prevention of heat exposure, particularly in the context of a changing climate.

Radiation Heat Transfer Effect on Thermal Sizing of Air-Cooling Heat Exchanger of Emergency Cooldown Tank

Energy Technology Data Exchange (ETDEWEB)

Moon, Joo Hyung; Kim, Young In; Kim, Keung Koo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kim, Myoung Jun; Lee, Hee Joon [School of Mechanical Eng., Kookmin University, Seoul (Korea, Republic of)

2014-10-15

An attempt has begun to extend the life time of emergency cooldown tank (ECT) by Korea Atomic Energy Research Institute (KAERI) researchers. Moon et al. recently reported a basic concept upon how to keep the ECT in operation beyond 72 hours after an accident occurs without any active corrective actions for the postulated design basis accidents. When the SMART (System-integrated Modular Advanced Reac-Tor) received its Standard Design Approval (SDA) for the first time in the world, hybrid safety systems are applied. However, the passive safety systems of SMART are being enforced in response to the public concern for much safer reactors since the Fukushima accident occurred. The ECT is a major component of a passive residual heat removal system (PRHRS), which is one of the most important systems to enhance the safety of SMART. It is being developed in a SMART safety enhancement project to contain enough cooling water to remove a sensible heat and a decay heat from reactor core for 72 hours since an accident occurs. Moon et al. offered to install another heat exchanger above the ECT and to recirculate an evaporated steam into water, which enables the ECT to be in operation, theoretically, indefinitely. An investigation was made to determine how long and how many tubes were required to meet the purpose of the study. In their calculation, however, a radiation heat transfer effect was neglected. The present study is to consider the radiation heat transfer for the design of air-cooling heat exchanger. Radiation heat transfer is normally ignored in many situations, but this is not the case for the present study. Kim et al. conducted thermal sizing of scaled-down ECT heat exchanger, which will be used to validate experimentally the basic concept of the present study. Their calculation is also examined to see if a radiation heat transfer effect was taken into consideration. The thermal sizing of an air-cooling heat exchanger was conducted including radiation heat transfer

The impact of temperature on mortality in a subtropical city: effects of cold, heat, and heat waves in São Paulo, Brazil

Science.gov (United States)

Son, Ji-Young; Gouveia, Nelson; Bravo, Mercedes A.; de Freitas, Clarice Umbelino; Bell, Michelle L.

2016-01-01

Understanding how weather impacts health is critical, especially under a changing climate; however, relatively few studies have investigated subtropical regions. We examined how mortality in São Paulo, Brazil, is affected by cold, heat, and heat waves over 14.5 years (1996-2010). We used over-dispersed generalized linear modeling to estimate heat- and cold-related mortality, and Bayesian hierarchical modeling to estimate overall effects and modification by heat wave characteristics (intensity, duration, and timing in season). Stratified analyses were performed by cause of death and individual characteristics (sex, age, education, marital status, and place of death). Cold effects on mortality appeared higher than heat effects in this subtropical city with moderate climatic conditions. Heat was associated with respiratory mortality and cold with cardiovascular mortality. Risk of total mortality was 6.1 % (95 % confidence interval 4.7, 7.6 %) higher at the 99th percentile of temperature than the 90th percentile (heat effect) and 8.6 % (6.2, 11.1 %) higher at the 1st compared to the 10th percentile (cold effect). Risks were higher for females and those with no education for heat effect, and males for cold effect. Older persons, widows, and non-hospital deaths had higher mortality risks for heat and cold. Mortality during heat waves was higher than on non-heat wave days for total, cardiovascular, and respiratory mortality. Our findings indicate that mortality in São Paulo is associated with both cold and heat and that some subpopulations are more vulnerable.

The impact of temperature on mortality in a subtropical city: effects of cold, heat, and heat waves in São Paulo, Brazil.

Science.gov (United States)

Son, Ji-Young; Gouveia, Nelson; Bravo, Mercedes A; de Freitas, Clarice Umbelino; Bell, Michelle L

2016-01-01

Understanding how weather impacts health is critical, especially under a changing climate; however, relatively few studies have investigated subtropical regions. We examined how mortality in São Paulo, Brazil, is affected by cold, heat, and heat waves over 14.5 years (1996-2010). We used over-dispersed generalized linear modeling to estimate heat- and cold-related mortality, and Bayesian hierarchical modeling to estimate overall effects and modification by heat wave characteristics (intensity, duration, and timing in season). Stratified analyses were performed by cause of death and individual characteristics (sex, age, education, marital status, and place of death). Cold effects on mortality appeared higher than heat effects in this subtropical city with moderate climatic conditions. Heat was associated with respiratory mortality and cold with cardiovascular mortality. Risk of total mortality was 6.1% (95% confidence interval 4.7, 7.6%) higher at the 99th percentile of temperature than the 90th percentile (heat effect) and 8.6% (6.2, 11.1%) higher at the 1st compared to the 10th percentile (cold effect). Risks were higher for females and those with no education for heat effect, and males for cold effect. Older persons, widows, and non-hospital deaths had higher mortality risks for heat and cold. Mortality during heat waves was higher than on non-heat wave days for total, cardiovascular, and respiratory mortality. Our findings indicate that mortality in São Paulo is associated with both cold and heat and that some subpopulations are more vulnerable.

Case studies on heat stress related perceptions in different industrial sectors in southern India.

Science.gov (United States)

Balakrishnan, Kalpana; Ramalingam, Ayyappan; Dasu, Venkatesan; Stephen, Jeremiah Chinnadurai; Sivaperumal, Mohan Raj; Kumarasamy, Deepan; Mukhopadhyay, Krishnendu; Ghosh, Santu; Sambandam, Sankar

2010-11-29

Linkages between thermal loads and its physiological consequences have been widely studied in non-tropical developed country settings. In many developing countries like India, despite the widespread recognition of the problem, limited attempts have been made to estimate health impacts related to occupational heat stress and fewer yet to link heat stress with potential productivity losses. This is reflected in the ubiquity of workplaces with limited or no controls to reduce exposures. As a prelude to understanding the feasibility of alternative interventions in different industrial sectors, we present case studies from 10 different industrial units in Tamil Nadu, Chennai, which describe perceptions of occupational heat stress among the workers and supervisors/management.Units were selected from among those who had previously requested an assessment of workplace heat stress exposure at select locations as part of routine industrial hygiene services provided by the investigators. Since the earlier measurements were performed in response to a management request, all units were revisited to generate a simple job and process profile using checklists in order to understand the overall heat exposure situation in the concerned unit. This was followed by a simple questionnaire administration to a small subsample of employees to evaluate the perceptions of workers and supervisors/management. Finally, we retrieved available quantitative data from previous measurements of heat stress at these units to correlate prevalence of exposures with respective perceptions.Results indicate that the existing level of controls may not be sufficient for managing work-related heat stress in any of the sectors studied, with wide variations in perceived risks. There was a noticeable disconnect between worker's perceptions and their ability to secure workplace improvements related to heat stress from the management. Wider availability of engineering and administrative controls in the industries

Case studies on heat stress related perceptions in different industrial sectors in southern India

Directory of Open Access Journals (Sweden)

Kalpana Balakrishnan

2010-11-01

Full Text Available Linkages between thermal loads and its physiological consequences have been widely studied in non-tropical developed country settings. In many developing countries like India, despite the widespread recognition of the problem, limited attempts have been made to estimate health impacts related to occupational heat stress and fewer yet to link heat stress with potential productivity losses. This is reflected in the ubiquity of workplaces with limited or no controls to reduce exposures. As a prelude to understanding the feasibility of alternative interventions in different industrial sectors, we present case studies from 10 different industrial units in Tamil Nadu, Chennai, which describe perceptions of occupational heat stress among the workers and supervisors/management.Units were selected from among those who had previously requested an assessment of workplace heat stress exposure at select locations as part of routine industrial hygiene services provided by the investigators. Since the earlier measurements were performed in response to a management request, all units were revisited to generate a simple job and process profile using checklists in order to understand the overall heat exposure situation in the concerned unit. This was followed by a simple questionnaire administration to a small subsample of employees to evaluate the perceptions of workers and supervisors/management. Finally, we retrieved available quantitative data from previous measurements of heat stress at these units to correlate prevalence of exposures with respective perceptions.Results indicate that the existing level of controls may not be sufficient for managing work-related heat stress in any of the sectors studied, with wide variations in perceived risks. There was a noticeable disconnect between worker's perceptions and their ability to secure workplace improvements related to heat stress from the management. Wider availability of engineering and administrative

Containment Emergency Sump Performance. Technical findings related to Unresolved Safety Issue A-43. Revision 1

International Nuclear Information System (INIS)

1985-10-01

This report summarizes key technical findings related to Unresolved Safety Issue (USI) A-43, Containment Emergency Sump Performance. Both BWRs and PWRs are considered in this report. Emergency core cooling systems require a clean, reliable water source to maintain long-term recirculation following a loss-of-coolant accident (LOCA). PWRs rely on the containment emergency sump to provide such a water supply to residual heat removal pumps and containment spray pumps. BWRs rely on pump suction intakes in the suppression pool or wet well to provide water to residual heat removal and core spray systems. Thus, the technical findings in this report provide information on post-LOCA recirculation. These findings have been derived from extensive experimental studies, generic plant studies, and assessments of sumps used for long-term cooling. Results of hydraulic tests have shown that the potential for air ingestion is less severe than previously hypothesized. The effects of debris blockage on NPSH margin must be dealt with on a plant-specific basis. These findings have been used to develop revisions to Regulatory Guide 1.82 and Standard Review Plan Section 6.2.2 (NUREG-0800)

Consumer life-cycle cost impacts of energy-efficiency standards for residential-type central air conditioners and heat pumps

International Nuclear Information System (INIS)

Rosenquist, Gregory; Chan, Peter; Lekov, Alex; McMahon, James; Van Buskirk, Robert

2001-01-01

In support of the federal government's efforts to raise the minimum energy-efficiency standards for residential-type central air conditioners and heat pumps, a consumer life-cycle cost (LCC) analysis was conducted to demonstrate the economic impacts on individual consumers from revisions to the standards. LCC is the consumer's cost of purchasing and installing an air conditioner or heat pump and operating the unit over its lifetime. The LCC analysis is conducted on a nationally representative sample of air conditioner and heat pump consumers resulting in a distribution of LCC impacts showing the percentage of consumers that are either benefiting or being burdened by increased standards. Relative to the existing minimum efficiency standard of 10 SEER, the results show that a majority of split system air conditioner and heat pump consumers will either benefit or be insignificantly impacted by increased efficiency standards of up to 13 SEER

Consumer life-cycle cost impacts of energy-efficiency standards for residential-type central air conditioners and heat pumps

Energy Technology Data Exchange (ETDEWEB)

Rosenquist, Gregory; Chan, Peter; Lekov, Alex; McMahon, James; Van Buskirk, Robert

2001-10-10

In support of the federal government's efforts to raise the minimum energy-efficiency standards for residential-type central air conditioners and heat pumps, a consumer life-cycle cost (LCC) analysis was conducted to demonstrate the economic impacts on individual consumers from revisions to the standards. LCC is the consumer's cost of purchasing and installing an air conditioner or heat pump and operating the unit over its lifetime. The LCC analysis is conducted on a nationally representative sample of air conditioner and heat pump consumers resulting in a distribution of LCC impacts showing the percentage of consumers that are either benefiting or being burdened by increased standards. Relative to the existing minimum efficiency standard of 10 SEER, the results show that a majority of split system air conditioner and heat pump consumers will either benefit or be insignificantly impacted by increased efficiency standards of up to 13 SEER.

Summer outdoor temperature and occupational heat-related illnesses in Quebec (Canada)

International Nuclear Information System (INIS)

Adam-Poupart, Ariane; Smargiassi, Audrey; Busque, Marc-Antoine; Duguay, Patrice; Fournier, Michel; Zayed, Joseph; Labrèche, France

2014-01-01

Background: Predicted rise in global mean temperature and intensification of heat waves associated with climate change present an increasing challenge for occupational health and safety. Although important scientific knowledge has been gathered on the health effects of heat, very few studies have focused on quantifying the association between outdoor heat and mortality or morbidity among workers. Objective: To quantify the association between occupational heat-related illnesses and exposure to summer outdoor temperatures. Methods: We modeled 259 heat-related illnesses compensated by the Workers' Compensation Board of Quebec between May and September, from 1998 to 2010, with maximum daily summer outdoor temperatures in 16 health regions of Quebec (Canada) using generalized linear models with negative binomial distributions, and estimated the pooled effect sizes for all regions combined, by sex and age groups, and for different time lags with random-effect models for meta-analyses. Results: The mean daily compensation count was 0.13 for all regions of Quebec combined. The relationship between daily counts of compensations and maximum daily temperatures was log-linear; the pooled incidence rate ratio (IRR) of daily heat-related compensations per 1 °C increase in daily maximum temperatures was 1.419 (95% CI 1.326 to 1.520). Associations were similar for men and women and by age groups. Increases in daily maximum temperatures at lags 1 and 2 and for two and three-day lag averages were also associated with increases in daily counts of compensations (IRRs of 1.206 to 1.471 for every 1 °C increase in temperature). Conclusion: This study is the first to quantify the association between occupational heat-related illnesses and exposure to summer temperatures in Canada. The model (risk function) developed in this study could be useful to improve the assessment of future impacts of predicted summer outdoor temperatures on workers and vulnerable groups, particularly in

Summer outdoor temperature and occupational heat-related illnesses in Quebec (Canada)

Energy Technology Data Exchange (ETDEWEB)

Adam-Poupart, Ariane [Department of Environmental and Occupational Health, School of Public Health, Université de Montréal, Montreal, QC (Canada); Smargiassi, Audrey [Department of Environmental and Occupational Health, School of Public Health, Université de Montréal, Montreal, QC (Canada); Institut national de santé publique du Québec (INSPQ), Montreal, QC (Canada); Busque, Marc-Antoine; Duguay, Patrice [Institut de recherche Robert-Sauvé en santé et en sécurité du travail (IRSST), Montreal, QC (Canada); Fournier, Michel [Direction de santé publique, Agence de la santé et des services sociaux de Montréal, Montreal, QC (Canada); Zayed, Joseph [Department of Environmental and Occupational Health, School of Public Health, Université de Montréal, Montreal, QC (Canada); Institut de recherche Robert-Sauvé en santé et en sécurité du travail (IRSST), Montreal, QC (Canada); Labrèche, France, E-mail: labreche.france@irsst.qc.ca [Department of Environmental and Occupational Health, School of Public Health, Université de Montréal, Montreal, QC (Canada); Institut de recherche Robert-Sauvé en santé et en sécurité du travail (IRSST), Montreal, QC (Canada)

2014-10-15

Background: Predicted rise in global mean temperature and intensification of heat waves associated with climate change present an increasing challenge for occupational health and safety. Although important scientific knowledge has been gathered on the health effects of heat, very few studies have focused on quantifying the association between outdoor heat and mortality or morbidity among workers. Objective: To quantify the association between occupational heat-related illnesses and exposure to summer outdoor temperatures. Methods: We modeled 259 heat-related illnesses compensated by the Workers' Compensation Board of Quebec between May and September, from 1998 to 2010, with maximum daily summer outdoor temperatures in 16 health regions of Quebec (Canada) using generalized linear models with negative binomial distributions, and estimated the pooled effect sizes for all regions combined, by sex and age groups, and for different time lags with random-effect models for meta-analyses. Results: The mean daily compensation count was 0.13 for all regions of Quebec combined. The relationship between daily counts of compensations and maximum daily temperatures was log-linear; the pooled incidence rate ratio (IRR) of daily heat-related compensations per 1 °C increase in daily maximum temperatures was 1.419 (95% CI 1.326 to 1.520). Associations were similar for men and women and by age groups. Increases in daily maximum temperatures at lags 1 and 2 and for two and three-day lag averages were also associated with increases in daily counts of compensations (IRRs of 1.206 to 1.471 for every 1 °C increase in temperature). Conclusion: This study is the first to quantify the association between occupational heat-related illnesses and exposure to summer temperatures in Canada. The model (risk function) developed in this study could be useful to improve the assessment of future impacts of predicted summer outdoor temperatures on workers and vulnerable groups, particularly in

Impact Toughness and Heat Treatment for Cast Aluminum

Science.gov (United States)

Lee, Jonathan A (Inventor)

2016-01-01

A method for transforming a cast component made of modified aluminum alloy by increasing the impact toughness coefficient using minimal heat and energy. The aluminum alloy is modified to contain 0.55%-0.60% magnesium, 0.10%-0.15% titanium or zirconium, less than 0.07% iron, a silicon-tomagnesium product ratio of 4.0, and less than 0.15% total impurities. The shortened heat treatment requires an initial heating at 1,000deg F. for up to I hour followed by a water quench and a second heating at 350deg F. to 390deg F. for up to I hour. An optional short bake paint cycle or powder coating process further increase.

Impact of the urban heat island on residents’ energy consumption: a case study of Qingdao

Science.gov (United States)

Ding, Feng; Pang, Huaji; Guo, Wenhui

2018-02-01

This paper examines impact of urban heat island on residents’ energy consumption through comparative analyses of monthly air temperature data observed in Qingdao, Laoshan and Huangdao weather stations. The results show effect of urban heat island is close related with urbanization speed. Recently, effects of urban heat island of Laoshan and Huangdao exceed that of Qingdao, consistent with rapid urbanization in Laoshan and Huangdao. Enhanced effect of urban heat island induces surface air temperature to rise up, further increase electricity energy consumption for air conditioning use in summer and reduce coal consumption for residents heating in winter. Comparing change of residents’ energy consumption in summer and winter, increments in summer are less than reduction in winter. This implicates effect of urban heat island is more obvious in winter than in summer.

Impact of Marijuana Legalization in Colorado on Adolescent Emergency and Urgent Care Visits.

Science.gov (United States)

Wang, George Sam; Davies, Sara Deakyne; Halmo, Laurie Seidel; Sass, Amy; Mistry, Rakesh D

2018-03-30

Approximately 6%-8% of U.S. adolescents are daily/past-month users of marijuana. However, survey data may not reliably reflect the impact of legalization on adolescents. The objective was to evaluate the impact of marijuana legalization on adolescent emergency department and urgent cares visits to a children's hospital in Colorado, a state that has allowed both medical and recreational marijuana. Retrospective review of marijuana-related visits by International Classification of Diseases codes and urine drug screens, from 2005 through 2015, for patients ≥ 13 and marijuana-related visits were identified. Behavioral health evaluation was obtained for 2,813 (67%); a psychiatric diagnosis was made for the majority (71%) of these visits. Coingestants were common; the most common was ethanol (12%). Marijuana-related visits increased from 1.8 per 1,000 visits in 2009 to 4.9 in 2015. (p = marijuana use, our data demonstrate a significant increase in adolescent marijuana-associated emergency department and urgent cares visits in Colorado. Copyright © 2018 The Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Ranking of European Capitals According to the Impact of Future Heat Waves

Science.gov (United States)

Smid, M.; Costa, A. C.; Russo, S.; Pebesma, E. J.; Canut, C. G.

2017-12-01

In warming Europe, we are witnessing a growth in urban population with aging trend, which will make the society more vulnerable to extreme heat waves. In the period 1950-2015 the occurrence of extreme heat waves increased across European capitals. As an example, Moscow was hit by the strongest heat wave of the present era, killing more than ten thousand people. Here we focus on larger metropolitan areas of European capitals. By using observations and an ensemble of eight EURO-CORDEX models under the RCP8.5 scenario, we calculate a suite of temperature based climate indices. We introduce a simple ranking procedure based on ensemble predictions using the mean of metropolitan grid cells for each capital, and population density as a proxy to quantify the future impact. Results show that the selected ensemble provides solid simulation of climate characteristics over most of the targeted metropolitan areas. All the investigated European metropolitan areas will be more vulnerable to extreme heat in the coming decades. Based on the impact ranking, the results reveal that in near, but mainly in distant future, the extreme heat events in European capitals will be not exclusive to traditionally exposed areas such as the Mediterranean and the Iberian Peninsula. The ranking of European capitals based on their vulnerability to the extreme heat could be of paramount importance to the decision makers in order to mitigate the heat related mortality, especially with the foreseen increase of global mean temperature. Acknowledgments: The authors gratefully acknowledge the support of Geoinformatics: Enabling Open Cities (GEO-C), the project funded by the European Commission within the Marie Skłodowska-Curie Actions, International Training Networks (ITN), European Joint Doctorates (EJD). Grant Agreement number 642332 — GEO-C — H2020-MSCA-ITN-2014.

Average Natural Convective Heat Transfer of Air-cooled Condensing Heat Exchanger of Emergency Cooldown Tank - Effect of Tube Banks

International Nuclear Information System (INIS)

Huh, Seon Jeong; Lee, Hee Joon; Kim, Myoung Jun; Moon, Joo Hyung; Bae, Youngmin; Kim, Young-In

2016-01-01

Recently emergency cooldown tank(ECT) is a great concern of passive cooling system for the safety of nuclear reactor. After the operation of a conventional passive cooling system for an extended period, however, the water level falls as a result of the evaporation from the ECT, as steam is emitted from the open top of the tank. In this study, the effect of heat transfer area at the air cooled condensing heat exchanger was investigated by changing 5×5 tube banks into 4×4 and 3×3. Moreover, each of air-side natural convective heat transfer coefficient of tube banks was compared to existing correlations. This study presents the effect of heat transfer area at air-cooled condensing heat exchanger. As heat transfer area decreased, the temperature of outlet increased. In other words, the cooling performance got lower with the decrease of heat transfer area. In addition, the average natural convective heat transfer coefficient was 15.3 W/m"2/K from the 4×4 tube banks, and 4.92 W/m"2/K from the 3×3 tube banks, which had quite a large error more than 46% especially with the value of 4×4 tube banks compared to the value from correlation equation. Therefore, according to this result, it is needed to measure the local heat transfer coefficient of vertical cylinder more elaborately in further study

Average Natural Convective Heat Transfer of Air-cooled Condensing Heat Exchanger of Emergency Cooldown Tank - Effect of Tube Banks

Energy Technology Data Exchange (ETDEWEB)

Huh, Seon Jeong; Lee, Hee Joon [Kookmin University, Seoul (Korea, Republic of); Kim, Myoung Jun; Moon, Joo Hyung; Bae, Youngmin; Kim, Young-In [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

Recently emergency cooldown tank(ECT) is a great concern of passive cooling system for the safety of nuclear reactor. After the operation of a conventional passive cooling system for an extended period, however, the water level falls as a result of the evaporation from the ECT, as steam is emitted from the open top of the tank. In this study, the effect of heat transfer area at the air cooled condensing heat exchanger was investigated by changing 5×5 tube banks into 4×4 and 3×3. Moreover, each of air-side natural convective heat transfer coefficient of tube banks was compared to existing correlations. This study presents the effect of heat transfer area at air-cooled condensing heat exchanger. As heat transfer area decreased, the temperature of outlet increased. In other words, the cooling performance got lower with the decrease of heat transfer area. In addition, the average natural convective heat transfer coefficient was 15.3 W/m{sup 2}/K from the 4×4 tube banks, and 4.92 W/m{sup 2}/K from the 3×3 tube banks, which had quite a large error more than 46% especially with the value of 4×4 tube banks compared to the value from correlation equation. Therefore, according to this result, it is needed to measure the local heat transfer coefficient of vertical cylinder more elaborately in further study.

Impact of wave phase jumps on stochastic heating

International Nuclear Information System (INIS)

Zasenko, V.I.; Zagorodny, A.G.; Cherniak, O.M.

2016-01-01

Interaction of charged particles with fields of random waves brings about known effects of stochastic acceleration and heating. Jumps of wave phases can increase the intensity of these processes substantially. Numerical simulation of particle heating and acceleration by waves with regular phases, waves with jumping phase and stochastic electric field impulses is performed. Comparison of the results shows that to some extent an impact of phase jumps is similar to the action of separate field impulses. Jumps of phase not only increase the intensity of resonant particle heating but involves in this process non-resonant particles from a wide range of initial velocities

Theoretical evaluation on the impact of heat exchanger in Advanced Adiabatic Compressed Air Energy Storage system

International Nuclear Information System (INIS)

Yang, Ke; Zhang, Yuan; Li, Xuemei; Xu, Jianzhong

2014-01-01

Highlights: • A multi-stage AA-CAES system model is established based on thermodynamic theory. • Four Cases about pressure loss and effectiveness of heat exchanger are investigated. • The impact of pressure loss on conversion of heat energy in TES is more sensitive. • The impact of heat exchanger effectiveness in charge process on system is stronger. • Pressure loss in heat exchanger affects the change trends of system efficiency. - Abstract: Advanced Adiabatic Compressed Air Energy Storage (AA-CAES) is a large-scale energy storage system based on gas turbine technology and thermal energy storage (TES). Electrical energy can be converted into internal energy of air and heat energy in TES during the charge process, while reverse energy conversion proceeds during discharge process. The performance of AA-CAES system requires further improvement in order to increase efficiency. In this paper, a multi-stage AA-CAES system model is established, and the influence of effectiveness and pressure loss in heat exchanger on energy conversion and utilization efficiency of AA-CAES system is analyzed theoretically based on the theory of thermodynamics. Four Cases about effectiveness and pressure loss of heat exchanger are investigated and compared with each other. It is found that effectiveness and pressure loss of heat exchanger are directly related to energy conversion and utilization in AA-CAES system. System efficiency changes with the variation of heat exchanger effectiveness and the impact of pressure loss on conversion of heat energy in TES is more sensitive than that of internal energy of air. Pressure loss can cause the complexity of system efficiency change. With appropriate selection of the values of heat exchanger effectiveness for both charge and discharge processes, an AA-CAES system with a higher efficiency could be expected

Climate Regulation of Rearing-Related Buildings - Evaluating the Factors Related to the Energy Requirement of Heating/Cooling, and Analysis of Alternative Solutions

Directory of Open Access Journals (Sweden)

Toth Laszló

2017-10-01

Full Text Available The most notable role in the energy usage of rearing-related buildings belongs to barn climate. For animals, one of the most important climate parameter is the temperature of the barn atmosphere. This can be kept in the proper interval by either heating or cooling. Apart from the operation of technological solutions, the need for airing barns must be taken into consideration. This means there are special technical requirements for airing. Also, they can cause significant energy losses. The temperature limit of heating is mainly influenced by the technological temperature related to keeping the animal in question, its acceptable differences, the heat loss of the barn, and the airing requirement. Energy sources applicable to heating can be traditional sources (coal, oil, gas, renewable sources (solar, biomass, wind, water, or geothermal energy, or transformed energy (electricity. As these have specific operation systems, they also mean further challenges in implementing efficient energy usage. The usage of heating energy can either be optimised by the rational usage of the heating system, or machinery explicitly made for reserving energy. Sparing heating energy via recuperative heating exchange may cut costs significantly, which we also proved in this research with actual calculations. However, we have to state that the efficient usage of heat exchangers requires that the internal and external temperatures differ greatly, which has a huge impact on heat recovery performance.

Emergency Cooling of Nuclear Power Plant Reactors With Heat Removal By a Forced-Draft Cooling Tower

Energy Technology Data Exchange (ETDEWEB)

Murav’ev, V. P., E-mail: murval1@mail.ru

2016-07-15

The feasibility of heat removal during emergency cooling of a reactor by a forced-draft cooling tower with accumulation of the peak heat release in a volume of precooled water is evaluated. The advantages of a cooling tower over a spray cooling pond are demonstrated: it requires less space, consumes less material, employs shorter lines in the heat removal system, and provides considerably better protection of the environment from wetting by entrained moisture.

Work-related stress and posttraumatic stress in emergency medical services.

Science.gov (United States)

Donnelly, Elizabeth

2012-01-01

Recent research efforts in emergency medical services (EMS) has identified variability in the ability of EMS personnel to recognize their level of stress-related impairment. Developing a better understanding of how workplace stress may affect EMS personnel is a key step in the process of increasing awareness of the impact of work-related stress and stress-related impairment. This paper demonstrates that for those in EMS, exposure to several types of workplace stressors is linked to stress reactions. Stress reactions such as posttraumatic stress symptomatology (PTSS) have the potential to negatively influence the health of EMS providers. This research demonstrates that two different types of work-related stress and alcohol use influence the development of PTSS. A probability sample of nationally registered emergency medical technician (EMT)-Basics and EMT-Paramedics (n = 1,633) completed an Internet-based survey. Respondents reported their levels of operational and organizational types of chronic stress, critical incident stress, alcohol use, and PTSS. Ordinary least squares regression illustrated that when demographic factors were controlled, organizational and operational forms of chronic stress, critical incident stress, and alcohol use were all significant predictors of PTSS (p stress and critical incident stress (p stress and alcohol use (p stress reaction. Higher levels of chronic stress, critical incident stress, and alcohol use significantly related to an increased level of PTSS. Further, for those reporting high levels of alcohol use or critical incident stress, interactions with high levels of chronic operational stress were associated with higher rates of PTSS. For those interested in the impact of work-related stress in EMS, these findings indicate that attention must be paid to levels of stress associated with both critical incident exposure as well as the chronic stress providers experience on a day-to-day basis.

System impact of energy efficient building refurbishment within a district heated region

International Nuclear Information System (INIS)

Lidberg, T.; Olofsson, T.; Trygg, L.

2016-01-01

The energy efficiency of the European building stock needs to be increased in order to fulfill the climate goals of the European Union. To be able to evaluate the impact of energy efficient refurbishment in matters of greenhouse gas emissions, it is necessary to apply a system perspective where not only the building but also the surrounding energy system is taken into consideration. This study examines the impact that energy efficient refurbishment of multi-family buildings has on the district heating and the electricity production. It also investigates the impact on electricity utilization and emissions of greenhouse gases. The results from the simulation of four energy efficiency building refurbishment packages were used to evaluate the impact on the district heating system. The packages were chosen to show the difference between refurbishment actions that increase the use of electricity when lowering the heat demand, and actions that lower the heat demand without increasing the electricity use. The energy system cost optimization modeling tool MODEST (Model for Optimization of Dynamic Energy Systems with Time-Dependent Components and Boundary Conditions) was used. When comparing two refurbishment packages with the same annual district heating use, this study shows that a package including changes in the building envelope decreases the greenhouse gas emissions more than a package including ventilation measures. - Highlights: • Choice of building refurbishment measures leads to differences in system impact. • Building refurbishment in district heating systems reduces co-produced electricity. • Valuing biomass as a limited resource is crucial when assessing global GHG impact. • Building envelope measures decrease GHG (greenhouse gas) emissions more than ventilation measures.

Effects of Friction and Plastic Deformation in Shock-Comminuted Damaged Rocks on Impact Heating

Science.gov (United States)

Kurosawa, Kosuke; Genda, Hidenori

2018-01-01

Hypervelocity impacts cause significant heating of planetary bodies. Such events are recorded by a reset of 40Ar-36Ar ages and/or impact melts. Here we investigate the influence of friction and plastic deformation in shock-generated comminuted rocks on the degree of impact heating using the iSALE shock-physics code. We demonstrate that conversion from kinetic to internal energy in the targets with strength occurs during pressure release, and additional heating becomes significant for low-velocity impacts (projectile mass to temperatures for the onset of Ar loss and melting from 8 and 10 km s-1, respectively, for strengthless rocks to 2 and 6 km s-1 for typical rocks. Our results suggest that the impact conditions required to produce the unique features caused by impact heating span a much wider range than previously thought.

Media and public relation. Part of emergency planning

International Nuclear Information System (INIS)

Jurkovic, I.A.; Debrecin, N.; Feretic, D.; Skanata, D.

2000-01-01

In the event of an emergency, media relation should be considered as one of the most important functions in emergency management. Individuals should be trained to be able to provide factual information to the media and the citizens during nuclear emergencies. Media can be also acquainted with the scope, ways and means of providing information related to nuclear emergencies during the predefined and regular media training or workshops, or as a part of regular training routine of involved organizations and institutions. This paper is through various approaches trying to present one of the possible ways that media and public relation can be treated during the emergencies and inside the developed emergency plans and procedures. It also represents an idea, based on the authors' experience, on a way in which things can be organized in the Croatian Technical Support Center when it comes to the media/public relation issue. (author)

It's the Heat AND the Humidity -- Assessment of Extreme Heat Scenarios to Enable the Assessment of Climate Impacts on Public Health

Science.gov (United States)

Crosson, William L; Al-Hamdan, Mohammad Z.; Economou, Sigrid, A.; Estes, Maurice G.; Estes, Sue M.; Puckett, Mark; Quattrochi, Dale A

2013-01-01

In the United States, extreme heat is the most deadly weather-related hazard. In the face of a warming climate and urbanization, which contributes to local-scale urban heat islands, it is very likely that extreme heat events (EHEs) will become more common and more severe in the U.S. In a NASA-funded project supporting the National Climate Assessment, we are providing historical and future measures of extreme heat to enable assessments of the impacts of heat on public health over the coterminous U.S. We use atmospheric temperature and humidity information from meteorological reanalysis and from Global Climate Models (GCMs) to provide data on past and future heat events. The project s emphasis is on providing assessments of the magnitude, frequency and geographic distribution of extreme heat in the U.S. to facilitate public health studies. In our approach, long-term climate change is captured with GCM output, and the temporal and spatial characteristics of short-term extremes are represented by the reanalysis data. Two future time horizons, 2040 and 2090, are the focus of future assessments; these are compared to the recent past period of 1981-2000. We are characterizing regional-scale temperature and humidity conditions using GCM output for two climate change scenarios (A2 and A1B) defined in the Special Report on Emissions Scenarios (SRES). For each future period, 20 years of multi-model GCM output have been analyzed to develop a heat stress climatology based on statistics of extreme heat indicators. Differences between the two future and past periods have been used to define temperature and humidity changes on a monthly time scale and regional spatial scale. These changes, combined with hourly historical meteorological data at a spatial scale (12 km) much finer than that of GCMs, enable us to create future climate realizations, from which we compute the daily heat stress measures and related spatially-specific climatological fields. These include the mean annual

Waste heat discharges in the aquatic environment -- impact and monitoring 2

International Nuclear Information System (INIS)

Kamath, P.R.

1980-01-01

Studies on ecological impacts, on fishes in particular, of waste heat discharges in the aquatic environment are briefly reviewed. These studies cover the susceptibility of fishes to disease and predation, population biology, parasite proliferation and its impact on fishes, synergistic effects due to heat and other stresses such as chemicals, pollutant, lowering of saturation limit of dissolved oxygen at elevated temperature and radioactivity. Experiences of monitoring waste heat discharges at the Rajasthan Atomic Power Station (RAPS) and the Tarapur Atomic Power Station (TAPS) are presented. Entrainment losses and impingement losses are also reviewed. Requirements for thermal monitoring are mentioned. (M.G.B.)

An emerging market in fuel cells? Residential combined heat and power in four countries

International Nuclear Information System (INIS)

Brown, J.E.; Hendry, C.N.; Harborne, P.

2007-01-01

Global concerns about fossil fuel stocks and security of supply have stimulated governments and industry to explore the development of alternative sources of energy. This has led to the emergence of liberalised markets for energy and the growth of de-centralised generation and distribution systems. Within this context, the use of a sustainable technology, such as fuel cells, as a generator of heat and electricity for the residential market, is a significant market opportunity. Using a set of framework conditions to explain the diffusion of renewable energy technologies, this paper analyses recent developments in four leading industrial countries, and concludes that Japan and Germany are competing to be the lead country for the introduction of this technology. In the process, we highlight the impact of government and the extent to which the development of a fuel cell industry is being driven by incumbent large firms acting independently or in collaboration with a range of other companies across the value chain. [Author

An emerging market in fuel cells? Residential combined heat and power in four countries

International Nuclear Information System (INIS)

Brown, James E.; Hendry, Chris N.; Harborne, Paul

2007-01-01

Global concerns about fossil fuel stocks and security of supply have stimulated governments and industry to explore the development of alternative sources of energy. This has led to the emergence of liberalised markets for energy and the growth of de-centralised generation and distribution systems. Within this context, the use of a sustainable technology, such as fuel cells, as a generator of heat and electricity for the residential market, is a significant market opportunity. Using a set of framework conditions to explain the diffusion of renewable energy technologies, this paper analyses recent developments in four leading industrial countries, and concludes that Japan and Germany are competing to be the lead country for the introduction of this technology. In the process, we highlight the impact of government and the extent to which the development of a fuel cell industry is being driven by incumbent large firms acting independently or in collaboration with a range of other companies across the value chain

Impact of water hardness on energy consumption of geyser heating ...

African Journals Online (AJOL)

Therefore, the Eskom Research, Testing, and Development Business Unit embarked on a study to examine total water hardness as a chemical parameter that may impact the power consumption of electrical geyser heating elements. An accelerated scaling method was developed to lime-scale the geyser heating elements ...

Relations between heat exchange and Rényi divergences

Science.gov (United States)

Wei, Bo-Bo

2018-04-01

In this work, we establish an exact relation which connects the heat exchange between two systems initialized in their thermodynamic equilibrium states at different temperatures and the Rényi divergences between the initial thermodynamic equilibrium state and the final nonequilibrium state of the total system. The relation tells us that the various moments of the heat statistics are determined by the Renyi divergences between the initial equilibrium state and the final nonequilibrium state of the global system. In particular the average heat exchange is quantified by the relative entropy between the initial equilibrium state and the final nonequilibrium state of the global system. The relation is applicable to both finite classical systems and finite quantum systems.

Impact of immigration on the cost of emergency visits in Barcelona (Spain

Directory of Open Access Journals (Sweden)

García Oscar

2007-01-01

Full Text Available Abstract Background The impact of immigration on health services utilisation has been analysed by several studies performed in countries with lower levels of immigration than Spain. These studies indicate that health services utilisation is lower among the immigrant population than among the host population and that immigrants tend to use hospital emergency services at the expense of primary care. We aimed to quantify the relative over-utilisation of emergency services in the immigrant population. Methods Emergency visits to Hospital del Mar in Barcelona in 2002 and 2003 were analysed. The country of origin, gender, age, discharge-related circumstances (hospital admission, discharge to home, or death, medical specialty, and variable cost related to medical care were registered. Immigrants were grouped into those from high-income countries (IHIC and those from low-income countries (ILIC and the average direct cost was compared by country of origin. A multivariate linear mixed model of direct costs was adjusted by country of origin (classified in five groups and by the individual variables of age, gender, hospital admission, and death as a cause of discharge. Medical specialty was considered as a random effect. Results With the exception of gynaecological emergency visits, costs resulting from emergency visits by both groups of immigrants were lower than those due to visits by the Spanish-born population. This effect was especially marked for emergency visits by adults. Conclusion Immigrants tend to use the emergency department in preference to other health services. No differences were found between IHIC and ILIC, suggesting that this result was due to the ease of access to emergency services and to lack of knowledge about the country's health system rather than to poor health status resulting from immigrants' socioeconomic position. The use of costs as a variable of complexity represents an opportunistic use of a highly exhaustive registry

Spatially explicit estimation of heat stress-related impacts of climate change on the milk production of dairy cows in the United Kingdom

Science.gov (United States)

Topp, Cairistiona F. E.; Moorby, Jon M.; Pásztor, László; Foyer, Christine H.

2018-01-01

Dairy farming is one the most important sectors of United Kingdom (UK) agriculture. It faces major challenges due to climate change, which will have direct impacts on dairy cows as a result of heat stress. In the absence of adaptations, this could potentially lead to considerable milk loss. Using an 11-member climate projection ensemble, as well as an ensemble of 18 milk loss estimation methods, temporal changes in milk production of UK dairy cows were estimated for the 21st century at a 25 km resolution in a spatially-explicit way. While increases in UK temperatures are projected to lead to relatively low average annual milk losses, even for southern UK regions (cow), the ‘hottest’ 25×25 km grid cell in the hottest year in the 2090s, showed an annual milk loss exceeding 1300 kg/cow. This figure represents approximately 17% of the potential milk production of today’s average cow. Despite the potential considerable inter-annual variability of annual milk loss, as well as the large differences between the climate projections, the variety of calculation methods is likely to introduce even greater uncertainty into milk loss estimations. To address this issue, a novel, more biologically-appropriate mechanism of estimating milk loss is proposed that provides more realistic future projections. We conclude that South West England is the region most vulnerable to climate change economically, because it is characterised by a high dairy herd density and therefore potentially high heat stress-related milk loss. In the absence of mitigation measures, estimated heat stress-related annual income loss for this region by the end of this century may reach £13.4M in average years and £33.8M in extreme years. PMID:29738581

Spatially explicit estimation of heat stress-related impacts of climate change on the milk production of dairy cows in the United Kingdom.

Directory of Open Access Journals (Sweden)

Nándor Fodor

Full Text Available Dairy farming is one the most important sectors of United Kingdom (UK agriculture. It faces major challenges due to climate change, which will have direct impacts on dairy cows as a result of heat stress. In the absence of adaptations, this could potentially lead to considerable milk loss. Using an 11-member climate projection ensemble, as well as an ensemble of 18 milk loss estimation methods, temporal changes in milk production of UK dairy cows were estimated for the 21st century at a 25 km resolution in a spatially-explicit way. While increases in UK temperatures are projected to lead to relatively low average annual milk losses, even for southern UK regions (<180 kg/cow, the 'hottest' 25×25 km grid cell in the hottest year in the 2090s, showed an annual milk loss exceeding 1300 kg/cow. This figure represents approximately 17% of the potential milk production of today's average cow. Despite the potential considerable inter-annual variability of annual milk loss, as well as the large differences between the climate projections, the variety of calculation methods is likely to introduce even greater uncertainty into milk loss estimations. To address this issue, a novel, more biologically-appropriate mechanism of estimating milk loss is proposed that provides more realistic future projections. We conclude that South West England is the region most vulnerable to climate change economically, because it is characterised by a high dairy herd density and therefore potentially high heat stress-related milk loss. In the absence of mitigation measures, estimated heat stress-related annual income loss for this region by the end of this century may reach £13.4M in average years and £33.8M in extreme years.

Changes in relative fit of human heat stress indices to cardiovascular, respiratory, and renal hospitalizations across five Australian urban populations

Science.gov (United States)

Goldie, James; Alexander, Lisa; Lewis, Sophie C.; Sherwood, Steven C.; Bambrick, Hilary

2018-03-01

Various human heat stress indices have been developed to relate atmospheric measures of extreme heat to human health impacts, but the usefulness of different indices across various health impacts and in different populations is poorly understood. This paper determines which heat stress indices best fit hospital admissions for sets of cardiovascular, respiratory, and renal diseases across five Australian cities. We hypothesized that the best indices would be largely dependent on location. We fit parent models to these counts in the summers (November-March) between 2001 and 2013 using negative binomial regression. We then added 15 heat stress indices to these models, ranking their goodness of fit using the Akaike information criterion. Admissions for each health outcome were nearly always higher in hot or humid conditions. Contrary to our hypothesis that location would determine the best-fitting heat stress index, we found that the best indices were related largely by health outcome of interest, rather than location as hypothesized. In particular, heatwave and temperature indices had the best fit to cardiovascular admissions, humidity indices had the best fit to respiratory admissions, and combined heat-humidity indices had the best fit to renal admissions. With a few exceptions, the results were similar across all five cities. The best-fitting heat stress indices appear to be useful across several Australian cities with differing climates, but they may have varying usefulness depending on the outcome of interest. These findings suggest that future research on heat and health impacts, and in particular hospital demand modeling, could better reflect reality if it avoided "all-cause" health outcomes and used heat stress indices appropriate to specific diseases and disease groups.

Changes in relative fit of human heat stress indices to cardiovascular, respiratory, and renal hospitalizations across five Australian urban populations.

Science.gov (United States)

Goldie, James; Alexander, Lisa; Lewis, Sophie C; Sherwood, Steven C; Bambrick, Hilary

2018-03-01

Various human heat stress indices have been developed to relate atmospheric measures of extreme heat to human health impacts, but the usefulness of different indices across various health impacts and in different populations is poorly understood. This paper determines which heat stress indices best fit hospital admissions for sets of cardiovascular, respiratory, and renal diseases across five Australian cities. We hypothesized that the best indices would be largely dependent on location. We fit parent models to these counts in the summers (November-March) between 2001 and 2013 using negative binomial regression. We then added 15 heat stress indices to these models, ranking their goodness of fit using the Akaike information criterion. Admissions for each health outcome were nearly always higher in hot or humid conditions. Contrary to our hypothesis that location would determine the best-fitting heat stress index, we found that the best indices were related largely by health outcome of interest, rather than location as hypothesized. In particular, heatwave and temperature indices had the best fit to cardiovascular admissions, humidity indices had the best fit to respiratory admissions, and combined heat-humidity indices had the best fit to renal admissions. With a few exceptions, the results were similar across all five cities. The best-fitting heat stress indices appear to be useful across several Australian cities with differing climates, but they may have varying usefulness depending on the outcome of interest. These findings suggest that future research on heat and health impacts, and in particular hospital demand modeling, could better reflect reality if it avoided "all-cause" health outcomes and used heat stress indices appropriate to specific diseases and disease groups.

Drop impacts onto cold and heated rigid surfaces: Morphological comparisons, disintegration limits and secondary atomization

International Nuclear Information System (INIS)

Moita, A.S.; Moreira, A.L.N.

2007-01-01

This paper addresses an experimental study aimed at characterizing the mechanisms of disintegration which occur when individual water and fuel droplets impact onto heated surfaces. The experiments consider the use of a simplified flow configuration and make use of high-speed visualization together with image processing techniques to characterize the morphology of the impact and to quantify the outcome of secondary atomization in terms of droplet size and number. The results evidence that surface topography, wettability and liquid properties combine in a complex way to alter the wetting behaviour of droplets at impact at different surface temperatures. The relative importance of the dynamic vapor pressure associated with the rate of vaporization and surface roughness increases with surface temperature and becomes dominant at the film boiling regime. The analysis is aimed at giving a phenomenological description of droplet disintegration within the various heat transfer regimes

Post-heading heat stress and yield impact in winter wheat of China.

Science.gov (United States)

Liu, Bing; Liu, Leilei; Tian, Liying; Cao, Weixing; Zhu, Yan; Asseng, Senthold

2014-02-01

Wheat is sensitive to high temperatures, but the spatial and temporal variability of high temperature and its impact on yield are often not known. An analysis of historical climate and yield data was undertaken to characterize the spatial and temporal variability of heat stress between heading and maturity and its impact on wheat grain yield in China. Several heat stress indices were developed to quantify heat intensity, frequency, and duration between heading and maturity based on measured maximum temperature records of the last 50 years from 166 stations in the main wheat-growing region of China. Surprisingly, heat stress between heading and maturity was more severe in the generally cooler northern wheat-growing regions than the generally warmer southern regions of China, because of the delayed time of heading with low temperatures during the earlier growing season and the exposure of the post-heading phase into the warmer part of the year. Heat stress between heading and maturity has increased in the last decades in most of the main winter wheat production areas of China, but the rate was higher in the south than in the north. The correlation between measured grain yields and post-heading heat stress and average temperature were statistically significant in the entire wheat-producing region, and explained about 29% of the observed spatial and temporal yield variability. A heat stress index considering the duration and intensity of heat between heading and maturity was required to describe the correlation of heat stress and yield variability. Because heat stress is a major cause of yield loss and the number of heat events is projected to increase in the future, quantifying the future impact of heat stress on wheat production and developing appropriate adaptation and mitigation strategies are critical for developing food security policies in China and elsewhere. © 2013 John Wiley & Sons Ltd.

Heat Related Illnesses

National Research Council Canada - National Science Library

Carter, R; Cheuvront, S. N; Sawka, M. N

2006-01-01

.... The risk of serious heat illness can be markedly reduced by implementing a variety of countermeasures, including becoming acclimated to the heat, managing heat stress exposure, and maintaining hydration...

Impact on Quality of Life in Dermatology Patients Attending an Emergency Department.

Science.gov (United States)

Alegre-Sánchez, A; de Perosanz-Lobo, D; Pascual-Sánchez, A; Pindado-Ortega, C; Fonda-Pascual, P; Moreno-Arrones, Ó M; Jaén-Olasolo, P

2017-12-01

Dermatological complaints have been estimated to represent up to 5-10% of all the visits to emergency departments. The main objective of our study was to determine how affected is the Health related Quality of Life (HRQL) in a series of patients attending an emergency department due to skin symptoms. A prospective study during one month (July 2016) was conducted in a hospital with full-time on-call dermatologists. The Short-Form SF-12v2 Health Survey and the Dermatology Life Quality Index (DLQI) were offered to all the patients over 18 years old attending the emergency department with cutaneous complaints. Clinical and epidemiological characteristics were also collected. In total 108 patients completed the study. Mean age found was 45.1±16.1 years. Mean DLQI score found was 10.56±6.12. Fifty-three patients (49%) had a score of 11 or higher in the DLQI questionnaire. Most affected subscales were "Symptoms and Feelings" in DLQI scale and "Overall Health" and "Vitality" for the SF-12. A very significant difference (p<0.0001) was found between women's (12.4±5.7) and men's (7.5±5.6) DLQI mean score (mean difference of 4.9; 95% confidence interval of the difference: 2.7-7.1). Patients visiting emergency units with cutaneous complaints seem to feel a moderate-large impact on their quality of life which is mainly related to the symptoms and feelings that they are experiencing. This impact is significantly higher among women. Copyright © 2017 AEDV. Publicado por Elsevier España, S.L.U. All rights reserved.

Emergency surgery pre-operative delays - realities and economic impacts.

Science.gov (United States)

O'Leary, D P; Beecher, S; McLaughlin, R

2014-12-01

A key principle of acute surgical service provision is the establishment of a distinct patient flow process and an emergency theatre. Time-to-theatre (TTT) is a key performance indicator of theatre efficiency. The combined impacts of an aging population, increasing demands and complexity associated with centralisation of emergency and oncology services has placed pressure on emergency theatre access. We examined our institution's experience with running a designated emergency theatre for acute surgical patients. A retrospective review of an electronic prospectively maintained database was performed between 1/1/12 and 31/12/13. A cost analysis was conducted to assess the economic impact of delayed TTT, with every 24hr delay incurring the cost of an additional overnight bed. Delays and the economic effects were assessed only after the first 24 h as an in-patient had elapsed. In total, 7041 procedures were performed. Overall mean TTT was 26 h, 2 min. There were significant differences between different age groups, with those aged under 16 year and over 65 having mean TTT at 6 h, 34 min (95% C.I. 0.51-2.15, p 65 years age group had a mean TTT of 23 h, 41 min which was significantly longer than the overall mean TTT Vascular and urological emergencies are significantly disadvantaged in competition with other services for a shared emergency theatre. The economic impact of delayed TTT was calculated at €7,116,000, or €9880/day of additional costs generated from delayed TTT over a 24 month period. One third of patients waited longer than 24 h for emergency surgery, with the elderly disproportionately represented in this group. Aside from the clinical risks of delayed and out of hours surgery, such practices incur significant additional costs. New strategies must be devised to ensure efficient access to emergency theatres, investment in such services is likely to be financially and clinically beneficial. Copyright © 2014 Surgical Associates Ltd. Published by Elsevier

Chromospheric heating during flux emergence in the solar atmosphere

Science.gov (United States)

Leenaarts, Jorrit; de la Cruz Rodríguez, Jaime; Danilovic, Sanja; Scharmer, Göran; Carlsson, Mats

2018-04-01

Context. The radiative losses in the solar chromosphere vary from 4 kW m-2 in the quiet Sun, to 20 kW m-2 in active regions. The mechanisms that transport non-thermal energy to and deposit it in the chromosphere are still not understood. Aim. We aim to investigate the atmospheric structure and heating of the solar chromosphere in an emerging flux region. Methods: We have used observations taken with the CHROMIS and CRISP instruments on the Swedish 1-m Solar Telescope in the Ca II K , Ca II 854.2 nm, Hα, and Fe I 630.1 nm and 630.2 nm lines. We analysed the various line profiles and in addition perform multi-line, multi-species, non-local thermodynamic equilibrium (non-LTE) inversions to estimate the spatial and temporal variation of the chromospheric structure. Results: We investigate which spectral features of Ca II K contribute to the frequency-integrated Ca II K brightness, which we use as a tracer of chromospheric radiative losses. The majority of the radiative losses are not associated with localised high-Ca II K-brightness events, but instead with a more gentle, spatially extended, and persistent heating. The frequency-integrated Ca II K brightness correlates strongly with the total linear polarization in the Ca II 854.2 nm, while the Ca II K profile shapes indicate that the bulk of the radiative losses occur in the lower chromosphere. Non-LTE inversions indicate a transition from heating concentrated around photospheric magnetic elements below log τ500 = -3 to a more space-filling and time-persistent heating above log τ500 = -4. The inferred gas temperature at log τ500 = -3.8 correlates strongly with the total linear polarization in the Ca II 854.2 nm line, suggesting that that the heating rate correlates with the strength of the horizontal magnetic field in the low chromosphere. Movies attached to Figs. 1 and 4 are available at http://https://www.aanda.org/

The impact of occupational hazards and traumatic events among Belgian emergency physicians.

Science.gov (United States)

Somville, Francis J; De Gucht, Véronique; Maes, Stan

2016-04-27

Emergency Physicians (EPs) are regularly confronted with work related traumatic events and hectic work conditions. Several studies mention a high incidence of post-traumatic stress disorder (PTSD) and psychosomatic complaints in EP. The main objective of this study is to examine the contribution of demographics, traumatic events, life events, the occurrence of occupational hazards and social support to post-traumatic stress symptoms (PTSS), psychological distress, fatigue, somatic complaints and job satisfaction in Emergency Physicians. For this study questionnaires were distributed to Belgian Emergency Physicians, These include, as determinants socio-demographic characteristics, traumatic events, life events, the occurrence of physical hazards, occurrences of violence, occurrence of situations that increase the risk of burnout and social support by supervisors and colleagues (LQWQ-Med), and as outcomes PTSS (IES), psychological distress (BSI), somatic complaints (PHQ 15), perceived fatigue (CIS20 R) and job satisfaction (LQWQ-MD). The response rate was 52.3 %. Hierarchical multiple regression analysis was performed to examine the association between the determinants and each of the outcomes. Emergency Physicians are particularly vulnerable to post-traumatic and chronic stress consequences due to repetitive exposure to work related traumatic incidents such as serious injuries or death of a child/adolescent. One out of three Emergency Physicians met sub-clinical levels of anxiety and 14.5 % met a clinical level of PTSD, short for Post-Traumatic Stress Disorder. Levels of fatigue were high but not directly related to traumatic events and occupational hazards. Social support from colleagues was found to have a beneficial effect on these complaints. Job satisfaction seems to have a protective factor. All of these not only affect the Emergency Physicians themselves, but can also have an adverse impact on patient care. EPs are, according to our and other studies

Threshold Evaluation of Emergency Risk Communication for Health Risks Related to Hazardous Ambient Temperature.

Science.gov (United States)

Liu, Yang; Hoppe, Brenda O; Convertino, Matteo

2018-04-10

Emergency risk communication (ERC) programs that activate when the ambient temperature is expected to cross certain extreme thresholds are widely used to manage relevant public health risks. In practice, however, the effectiveness of these thresholds has rarely been examined. The goal of this study is to test if the activation criteria based on extreme temperature thresholds, both cold and heat, capture elevated health risks for all-cause and cause-specific mortality and morbidity in the Minneapolis-St. Paul Metropolitan Area. A distributed lag nonlinear model (DLNM) combined with a quasi-Poisson generalized linear model is used to derive the exposure-response functions between daily maximum heat index and mortality (1998-2014) and morbidity (emergency department visits; 2007-2014). Specific causes considered include cardiovascular, respiratory, renal diseases, and diabetes. Six extreme temperature thresholds, corresponding to 1st-3rd and 97th-99th percentiles of local exposure history, are examined. All six extreme temperature thresholds capture significantly increased relative risks for all-cause mortality and morbidity. However, the cause-specific analyses reveal heterogeneity. Extreme cold thresholds capture increased mortality and morbidity risks for cardiovascular and respiratory diseases and extreme heat thresholds for renal disease. Percentile-based extreme temperature thresholds are appropriate for initiating ERC targeting the general population. Tailoring ERC by specific causes may protect some but not all individuals with health conditions exacerbated by hazardous ambient temperature exposure. © 2018 Society for Risk Analysis.

Temporal variation in the effect of heat and the role of the Italian heat prevention plan.

Science.gov (United States)

de'Donato, F; Scortichini, M; De Sario, M; de Martino, A; Michelozzi, P

2018-05-08

The aim of the article is to evaluate the temporal change in the effect of heat on mortality in Italy in the last 12 years after the introduction of the national heat plan. Time series analysis. Distributed lag non-linear models were used to estimate the association between maximum apparent temperature and mortality in 23 Italian cities included in the national heat plan in four study periods (before the introduction of the heat plan and three periods after the plan was in place between 2005 and 2016). The effect (relative risks) and impact (attributable fraction [AF] and number of heat-related deaths) were estimated for mild summer temperatures (20th and 75th percentile maximum apparent temperature [Tappmax]) and extreme summer temperatures (75th and 99th percentile Tappmax) in each study period. A survey of the heat preventive measures adopted over time in the cities included in the Italian heat plan was carried out to better describe adaptation measures and response. Although heat still has an impact on mortality in Italian cities, a reduction in heat-related mortality is observed progressively over time. In terms of the impact, the heat AF related to extreme temperatures declined from 6.3% in the period 1999-2002 to 4.1% in 2013-2016. Considering the entire temperature range (20th vs 99th percentile), the total number of heat-related deaths spared over the entire study period was 1900. Considering future climate change and the health burden associated to heat waves, it is important to promote adaptation measures by showing the potential effectiveness of heat prevention plans. Copyright © 2018 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Building-related health impacts in European and Chinese cities

DEFF Research Database (Denmark)

Tuomisto, Jouni T; Niittynen, Marjo; Pärjälä, Erkki

2015-01-01

consumption of buildings. In addition, the model should be usable for policy comparisons by non-health experts on city level with city-specific data, it should give guidance on the particular climate mitigation questions but at the same time increase understanding on the related health impacts and the model......BACKGROUND: Public health is often affected by societal decisions that are not primarily about health. Climate change mitigation requires intensive actions to minimise greenhouse gas emissions in the future. Many of these actions take place in cities due to their traffic, buildings, and energy...... consumption. Active climate mitigation policies will also, aside of their long term global impacts, have short term local impacts, both positive and negative, on public health. Our main objective was to develop a generic open impact model to estimate health impacts of emissions due to heat and power...

A Cross-Sectional Study of Heat Wave-Related Knowledge, Attitude, and Practice among the Public in the Licheng District of Jinan City, China.

Science.gov (United States)

Li, Jing; Xu, Xin; Ding, Guoyong; Zhao, Yun; Zhao, Ruixia; Xue, Fuzhong; Li, Jing; Gao, Jinghong; Yang, Jun; Jiang, Baofa; Liu, Qiyong

2016-06-29

Knowledge, attitude, and practice (KAP) are three key components for reducing the adverse health impacts of heat waves. However, research in eastern China regarding this is scarce. The present study aimed to evaluate the heat wave-related KAP of a population in Licheng in northeast China. This cross-sectional study included 2241 participants. Data regarding demographic characteristics, KAP, and heat illnesses were collected using a structured questionnaire. Univariate analysis and unconditional logistic regression models were used to analyze the data. Most residents had high KAP scores, with a mean score of 12.23 (standard deviation = 2.23) on a 17-point scale. Urban women and participants aged 35-44 years had relatively high total scores, and those with high education levels had the highest total score. There was an increased risk of heat-related illness among those with knowledge scores of 3-5 on an 8-point scale with mean score of 5.40 (standard deviation = 1.45). Having a positive attitude toward sunstroke prevention and engaging in more preventive practices to avoid heat exposure had a protective interaction effect on reducing the prevalence of heat-related illnesses. Although the KAP scores were relatively high, knowledge and practice were lacking to some extent. Therefore, governments should further develop risk-awareness strategies that increase awareness and knowledge regarding the adverse health impact of heat and help in planning response strategies to improve the ability of individuals to cope with heat waves.

A Cross-Sectional Study of Heat Wave-Related Knowledge, Attitude, and Practice among the Public in the Licheng District of Jinan City, China

Directory of Open Access Journals (Sweden)

Jing Li

2016-06-01

Full Text Available Knowledge, attitude, and practice (KAP are three key components for reducing the adverse health impacts of heat waves. However, research in eastern China regarding this is scarce. The present study aimed to evaluate the heat wave-related KAP of a population in Licheng in northeast China. This cross-sectional study included 2241 participants. Data regarding demographic characteristics, KAP, and heat illnesses were collected using a structured questionnaire. Univariate analysis and unconditional logistic regression models were used to analyze the data. Most residents had high KAP scores, with a mean score of 12.23 (standard deviation = 2.23 on a 17-point scale. Urban women and participants aged 35–44 years had relatively high total scores, and those with high education levels had the highest total score. There was an increased risk of heat-related illness among those with knowledge scores of 3–5 on an 8-point scale with mean score of 5.40 (standard deviation = 1.45. Having a positive attitude toward sunstroke prevention and engaging in more preventive practices to avoid heat exposure had a protective interaction effect on reducing the prevalence of heat-related illnesses. Although the KAP scores were relatively high, knowledge and practice were lacking to some extent. Therefore, governments should further develop risk-awareness strategies that increase awareness and knowledge regarding the adverse health impact of heat and help in planning response strategies to improve the ability of individuals to cope with heat waves.

Psycho-Social Issues in Mine Emergencies: The Impact on the Individual, the Organization and the Community

Directory of Open Access Journals (Sweden)

Kathleen M. Kowalski-Trakofler

2012-06-01

Full Text Available This paper draws on research conducted in the past two decades examining issues related to the human element in mine disasters. While much of the emergency response community employs a systems approach that takes into account psychosocial issues as they impact all aspects of an emergency, the mining industry has lagged behind in integrating this critical element. It is only within the past few years that behavioral interventions have begun to be seen as a part of disaster readiness and resiliency in the industry. The authors discuss the potential applications of psychosocial studies and suggest ways to improve mine emergency planning, psychological support, and decision-making during a response, as well as actions in the aftermath of incidents. Topics covered, among others, include an economic rationale for including such studies in planning a mine emergency response, sociological issues as they impact such things as leadership and rescue team dynamics, and psychological issues that have an effect on individual capacity to function under stress such as during escape, in refuge alternatives, and in body recovery. This information is intended to influence the mine emergency escape curriculum and impact actions and decision-making during and after a mine emergency. The ultimate goal is to mitigate the trauma experienced by individuals, the organization, and the community.

Accounting for adaptation and intensity in projecting heat wave-related mortality.

Science.gov (United States)

Wang, Yan; Nordio, Francesco; Nairn, John; Zanobetti, Antonella; Schwartz, Joel D

2018-02-01

How adaptation and intensity of heat waves affect heat wave-related mortality is unclear, making health projections difficult. We estimated the effect of heat waves, the effect of the intensity of heat waves, and adaptation on mortality in 209 U.S. cities with 168 million people during 1962-2006. We improved the standard time-series models by incorporating the intensity of heat waves using excess heat factor (EHF) and estimating adaptation empirically using interactions with yearly mean summer temperature (MST). We combined the epidemiological estimates for heat wave, intensity, and adaptation with the Coupled Model Intercomparison Project Phase 5 (CMIP5) multi-model dataset to project heat wave-related mortality by 2050. The effect of heat waves increased with its intensity. Adaptation to heat waves occurred, which was shown by the decreasing effect of heat waves with MST. However, adaptation was lessened as MST increased. Ignoring adaptation in projections would result in a substantial overestimate of the projected heat wave-related mortality (by 277-747% in 2050). Incorporating the empirically estimated adaptation into projections would result in little change in the projected heat wave-related mortality between 2006 and 2050. This differs regionally, however, with increasing mortality over time for cities in the southern and western U.S. but decreasing mortality over time for the north. Accounting for adaptation is important to reduce bias in the projections of heat wave-related mortality. The finding that the southern and western U.S. are the areas that face increasing heat-related deaths is novel, and indicates that more regional adaptation strategies are needed. Copyright © 2017 Elsevier Inc. All rights reserved.

[Self-reported substance abuse related emergencies: frequency and nature].

Science.gov (United States)

Schäfer, G; Smoltczyk, H; Dengler, W; Buchkremer, G

2000-04-01

The aim of this study was to estimate the frequency and nature of self-reported and drug-related emergencies. 47 patients of a ward for opiate detoxification were interviewed about their experiences with drug-related emergencies. Typical categories had to be found like overdoses, seizures, accidents and suicide attempts respectively. 68% had own experience with drug-related emergency. A majority suffered opiate overdose with different extensions as unconsciousness or breath-depression. Alcohol and polydrug use was associated with overdose. Drug-related accidents were only reported by men. Half the number of drug-related emergencies were treated in hospital. Most emergencies occurred alone either in a home environment or outside. Harm reduction interventions like observed user rooms should be established. Furthermore other strategies to reduce the number of emergencies as sharing naloxon or resuscitation programs in wards for detoxification could also be an effective method to prevent near fatal or fatal overdoses in dependent subjects.

Emergency medicine journal impact factor and change compared to other medical and surgical specialties.

Science.gov (United States)

Reynolds, Joshua C; Menegazzi, James J; Yealy, Donald M

2012-11-01

A journal impact factor represents the mean number of citations per article published. Designed as one tool to measure the relative importance of a journal, impact factors are often incorporated into academic evaluation of investigators. The authors sought to determine how impact factors of emergency medicine (EM) journals compare to journals from other medical and surgical specialties and if any change has taken place over time. The 2010 impact factors and 5-year impact factors for each journal indexed by the Thomson Reuters ISI Web of Knowledge Journal Citation Reports (JCR) were collected, and EM, medical, and surgical specialties were evaluated. The maximum, median, and interquartile range (IQR) of the current impact factor and 5-year impact factor in each journal category were determined, and specialties were ranked according to the summary statistics. The "top three" impact factor journals for each specialty were analyzed, and growth trends from 2001 through 2010 were examined with random effects linear regression. Data from 2,287 journals in 31 specialties were examined. There were 23 EM journals with a current maximum impact factor of 4.177, median of 1.269, and IQR of 0.400 to 2.176. Of 23 EM journals, 57% had a 5-year impact factor available, with a maximum of 4.531, median of 1.325, and IQR of 0.741 to 2.435. The top three EM journals had a mean standard deviation (±SD) impact factor of 3.801 (±0.621) and median of 4.142 and a mean (±SD) 5-year impact factor of 3.788 (±1.091) and median of 4.297, with a growth trend of 0.211 (95% confidence interval [CI] = 0.177 to 0.245; p journals ranked no higher than 24th among 31 specialties. Emergency medicine journals rank low in impact factor summary statistics and growth trends among 31 medical and surgical specialties. © 2012 by the Society for Academic Emergency Medicine.

Modeling and impacts of the latent heat of phase change and specific heat for phase change materials

Science.gov (United States)

Scoggin, J.; Khan, R. S.; Silva, H.; Gokirmak, A.

2018-05-01

We model the latent heats of crystallization and fusion in phase change materials with a unified latent heat of phase change, ensuring energy conservation by coupling the heat of phase change with amorphous and crystalline specific heats. We demonstrate the model with 2-D finite element simulations of Ge2Sb2Te5 and find that the heat of phase change increases local temperature up to 180 K in 300 nm × 300 nm structures during crystallization, significantly impacting grain distributions. We also show in electrothermal simulations of 45 nm confined and 10 nm mushroom cells that the higher amorphous specific heat predicted by this model increases nucleation probability at the end of reset operations. These nuclei can decrease set time, leading to variability, as demonstrated for the mushroom cell.

Shorter Versus Longer Shift Durations to Mitigate Fatigue and Fatigue-Related Risks in Emergency Medical Services Personnel and Related Shift Workers: A Systematic Review

Science.gov (United States)

2018-01-11

Background: This study comprehensively reviewed the literature on the impact of shorter versus longer shifts on critical and important outcomes for Emergency Medical Services (EMS) personnel and related shift worker groups. Methods: Six databases (e....

The impact of a temporary ice-rink on an emergency department service.

LENUS (Irish Health Repository)

Clarke, Heather J

2012-02-03

BACKGROUND: A temporary ice-rink opened close to Cork city for 6 weeks from 30 November 2003. During this time, a number of patients presented to the local emergency departments with ice-skating-related injuries. We documented these injuries. METHODS: All patients presenting to emergency departments in Cork city with ice-skating-related complaints were included. Information on age and sex, mechanism of injury, diagnosis, follow-up\\/disposition and ambulance service utilization was recorded. RESULTS: One hundred and twenty-five ice-rink-related attendances were reported at Cork emergency departments, representing 1.25% of total attendances. One hundred and twenty-three patients presented with skating-related injuries and two with medical complaints occurring at the ice-rink: 70.8% were female patients and 29.2% were male patients. In the 4-14-year age group, however, 48.5% were girls and 51.5% were boys. Most injuries were directly due to falls; 5.6% were due to skate blades. The commonest site of injury was the upper limb. Fractures and dislocations accounted for 53.9% of injuries, with 20.5% of these requiring orthopaedic admission. Lacerations and digital injuries accounted for 7.1%, with 11% of these required admission for surgery. One minor head injury was reported. 38.1% had soft tissue injuries. Fifteen patients were transported by ambulance. These attendances represented a minimum overall cost of 77,510 euro to the local health service. CONCLUSIONS: A temporary ice-rink had a significant impact on local emergency departments. Currently, there is no specific legislation in Ireland relating to public health and safety in ice-rinks. We recommend consultation with local public bodies before opening such facilities, and appropriate regulation.

Slow Impacts on Strong Targets Bring on the Heat

Science.gov (United States)

Melosh, H. J.; Ivanov, B. A.

2018-03-01

An important new paper by Kurosawa and Genda (2017, https://doi.org/10.1002/2017GL076285) reports a previously overlooked source of heating in low velocity meteorite impacts. Plastic deformation of the pressure-strengthened rocks behind the shock front dissipates energy, which appears as heat in addition to that generated across the shock wave itself. This heat source has surprisingly escaped explicit attention for decades: First, because it is minimized in the geometry typically chosen for laboratory experiments; and second because it is most important in rocks, and less so for the metals usually used in experiments. Nevertheless, modern numerical computer codes that include strength do compute this heating correctly. This raises the philosophical question of whether we can claim to understand some process just because our computer codes compute the results correctly.

Connective Heating Improvement for Emergency Fire Shelters (CHIEFS): Composition and Performance of Fire Shelter Concepts at Close-Out

Science.gov (United States)

Fody, Joshua M.; Daryabeigi, Kamran; Bruce, Walter E., III; Wells, John M.; Wusk, Mary E.; Calomino, Anthony M.; Miller, Steve D.

2018-01-01

Summary of highlights of the Convective Heating Improvement for Emergency Fire Shelters (CHIEFS) taskunder NASA. CHIEFS was tasked with providing the US Forest Service with an emergency fire shelter forimproved resistance to flame contact. Emphasis is on the final shelter designs at task close-out (end of FY17).

Lenr and "cold Fusion" Excess Heat:. Their Relation to Other Anomalous Microphysical Energy Experiments and Emerging New Energy Technologies

Science.gov (United States)

Mallove, Eugene F.

2005-12-01

During the past 15 years, indisputable experimental evidence has built up for substantial excess heat (far beyond ordinary chemical energy) and low-energy nuclear reaction phenomena in specialized heavy hydrogen and ordinary hydrogen-containing systems.1 The primary theorists in the field that is properly designated Cold Fusion/LENR have generally assumed that the excess heat phenomena is commensurate with nuclear ash (such as helium), whether already identified or presumed to be present but not yet found. That was an excellent initial hypothesis. However, the commensurate nuclear ash hypothesis has not been proved, and appears to be approximately correct in only a few experiments. During this same period, compelling evidence although not as broadly verified as data from cold fusion/LENR has also emerged for other microphysical sources of energy that were previously unexpected by accepted physics. The exemplar of this has been the "hydrino" physics work of Dr. Randall Mills and his colleagues at Black-Light Power Corporation, which was a radical outgrowth from the cold fusion field that emerged publicly in May 1991.2 Even more far-reaching is the work in vacuum energy extraction pioneered by Dr. Paulo and Alexandra Correa, which first became public in 1996.3 This vacuum energy experimentation began in the early 1980s and has been reduced to prototype technological devices, such as the patented PAGDTM (pulsed abnormal glow discharge) electric power generator, as well as many published experiments that can be performed in table-top fashion to verify the Correa Aetherometry (non-luminiferous or non-electromagnetic aether measurement science).4 In an era when mainstream science and its media is all agog about dark matter and dark energy composing the vast bulk of the universe, there is a great need to reconcile, if possible, the significant bodies of evidence from these three major experimental and theoretical streams: cold fusion/LENR, hydrino physics, and

Hurricane-related emergency department visits in an inland area: an analysis of the public health impact of Hurricane Hugo in North Carolina.

Science.gov (United States)

Brewer, R D; Morris, P D; Cole, T B

1994-04-01

To evaluate the public health impact of a hurricane on an inland area. Descriptive study. Seven hospital emergency departments. Patients who were treated from September 22 to October 6, 1989, for an injury or illness related to Hurricane Hugo. None. Over the two-week study period, 2,090 patients were treated for injuries or illnesses related to the hurricane. Of these, 1,833 (88%) were treated for injuries. Insect stings and wounds accounted for almost half of the total cases. A substantial proportion (26%) of the patients suffering from stings had a generalized reaction (eg, hives, wheezing, or both). Nearly one-third of the wounds were caused by chain saws. Hurricanes can lead to substantial morbidity in an inland area. Disaster plans should address risks associated with stinging insects and hazardous equipment and should address ways to improve case reporting.

Durum wheat diversity for heat stress tolerance during inflorescence emergence is correlated to TdHSP101C expression in early developmental stages.

Directory of Open Access Journals (Sweden)

Miguel Bento

Full Text Available The predicted world population increase along with climate changes threatens sustainable agricultural supply in the coming decades. It is therefore vital to understand crops diversity associated to abiotic stress response. Heat stress is considered one of the major constrains on crops productivity thus it is essential to develop new approaches for a precocious and rigorous evaluation of varietal diversity regarding heat tolerance. Plant cell membrane thermostability (CMS is a widely used method for wheat thermotolerance assessment although its limitations require complementary solutions. In this work we used CMS assay and explored TdHSP101C genes as an additional tool for durum wheat screening. Genomic and transcriptomic analyses of TdHSP101C genes were performed in varieties with contrasting CMS results and further correlated with heat stress tolerance during fertilization and seed development. Although the durum wheat varieties studied presented a very high homology on TdHSP101C genes (>99% the transcriptomic assessment allowed the discrimination between varieties with good CMS results and its correlation with differential impacts of heat treatment during inflorescence emergence and seed development on grain yield. The evidences here reported indicate that TdHSP101C transcription levels induced by heat stress in fully expanded leaves may be a promising complementary screening tool to discriminate between durum wheat varieties identified as thermotolerant through CMS.

Fluctuation relation for heat exchange in Markovian open quantum systems

Science.gov (United States)

Ramezani, M.; Golshani, M.; Rezakhani, A. T.

2018-04-01

A fluctuation relation for the heat exchange of an open quantum system under a thermalizing Markovian dynamics is derived. We show that the probability that the system absorbs an amount of heat from its bath, at a given time interval, divided by the probability of the reverse process (releasing the same amount of heat to the bath) is given by an exponential factor which depends on the amount of heat and the difference between the temperatures of the system and the bath. Interestingly, this relation is akin to the standard form of the fluctuation relation (for forward-backward dynamics). We also argue that the probability of the violation of the second law of thermodynamics in the form of the Clausius statement (i.e., net heat transfer from a cold system to its hot bath) drops exponentially with both the amount of heat and the temperature differences of the baths.

Heat-Related Illnesses

Medline Plus

Full Text Available ... Until Help Arrives What To Do In A Medical Emergency Childhood Emergencies Careers in Emergency Medicine Seconds ... Lives Be Prepared Safe Citizen Day Organize Important Medical Information ER Checklists Preparing for Emergencies Be ready ...

Heat-Related Illnesses

Medline Plus

Full Text Available ... a Medical Emergency Childhood Emergencies Careers in Emergency Medicine Seconds Save Lives Be Prepared Safe Citizen Day ... So Long Admission to the Hospital Heroes On Medicine's Front Line Observation Emergency Care Fact Sheet Health & ...

Heat-Related Illnesses

Medline Plus

Full Text Available ... A Medical Emergency Childhood Emergencies Careers in Emergency Medicine Seconds Save Lives Be Prepared Safe Citizen Day ... So Long? Admission to the Hospital Heroes on Medicine's Front Line Observation Emergency Care Fact Sheet Health & ...

Effect of Cattaneo-Christov heat flux on buoyancy MHD nanofluid flow and heat transfer over a stretching sheet in the presence of Joule heating and thermal radiation impacts

Science.gov (United States)

Dogonchi, A. S.; Ganji, D. D.

2018-06-01

In this study, buoyancy MHD nanofluid flow and heat transfer over a stretching sheet in the presence of Joule heating and thermal radiation impacts, are studied. Cattaneo-Christov heat flux model instead of conventional Fourier's law of heat conduction is applied to investigate the heat transfer characteristics. A similarity transformation is used to transmute the governing momentum and energy equations into non-linear ordinary differential equations with the appropriate boundary conditions. The obtained non-linear ordinary differential equations are solved numerically. The impacts of diverse active parameters such as the magnetic parameter, the radiation parameter, the buoyancy parameter, the heat source parameter, the volume fraction of nanofluid and the thermal relaxation parameter are examined on the velocity and temperature profiles. In addition, the value of the Nusselt number is calculated and presented through figures. The results demonstrate that the temperature profile is lower in the case of Cattaneo-Christov heat flux model as compared to Fourier's law. Moreover, the Nusselt number raises with the raising volume fraction of nanofluid and it abates with the ascending the radiation parameter.

Does Gender Moderate the Relations Between Externalizing Behavior and Key Emergent Literacy Abilities? Evidence From a Longitudinal Study.

Science.gov (United States)

Allan, Nicholas P; Joye, Shauna W; Lonigan, Christopher J

2017-05-01

There is a significant negative relation between externalizing behavior and emergent literacy skills among preschool children. The purpose of this study was to examine the impact of gender on the predictive relation of externalizing behavior and emergent literacy in a group of 178 preschool children (mean age = 48.50 months, SD = 3.66; 48% boys). Externalizing behaviors predicted emergent literacy over time. Distinct patterns of predictive associations dependent on gender were found. Girls with higher levels of externalizing behaviors experienced less change in their vocabulary skills compared with the vocabulary change shown by girls with lower levels of these problem behaviors. The results suggest that early identification programs that include externalizing behavior problems and their relation with emergent literacy development should account for potential gender differences. A theoretical framework in which girls with behavior problems receive less opportunity for vocabulary acquisition is presented.

Impact of interpersonal relations on learning and development of professional identity: A study of residents' perceptions.

Science.gov (United States)

Blouin, Danielle

2018-06-01

Informal learning includes all occurrences during one's life when learning is not deliberate. Prior research on informal learning in healthcare contexts examined learning happening outside of the formal curriculum, yet still in the workplace. This study explores residents' perceptions about extracurricular factors outside of the workplace that contribute to their learning and development of professional identity, whether interpersonal relations are recognised as such factors, and positive and negative impacts of interpersonal relations. In this qualitative study, all 21 residents in our Emergency Medicine programme were asked, in a web-based survey with open-ended questions, to identify extracurricular sources outside of the workplace perceived as contributing to their learning and professional identity development, and list positive and negative impacts of interpersonal relations outside of work on learning and identity development. Themes were extracted through content analysis of the narrative responses. Two reviewers coded all data. Thirteen (62%) residents identified 37 factors grouped under five themes: learning activity, role modelling, support, non-clinical academic roles, and social interactions. Interpersonal relations were perceived as having positive and negative impacts, including creating support, positive role modelling and mentoring, increasing concrete learning, as well as lapses in teaching skills, deficits in professional role training, and loss of personal time. Several extracurricular factors outside of the workplace contribute to resident learning and identity development, including interpersonal relations, which have positive and negative impacts. The most often noted negative impact of interpersonal relations outside of work between residents and faculty related to perceived lapses in teaching skills. © 2018 Australasian College for Emergency Medicine and Australasian Society for Emergency Medicine.

Adaptation to Climate Change: A Comparative Analysis of Modeling Methods for Heat-Related Mortality.

Science.gov (United States)

Gosling, Simon N; Hondula, David M; Bunker, Aditi; Ibarreta, Dolores; Liu, Junguo; Zhang, Xinxin; Sauerborn, Rainer

2017-08-16

Multiple methods are employed for modeling adaptation when projecting the impact of climate change on heat-related mortality. The sensitivity of impacts to each is unknown because they have never been systematically compared. In addition, little is known about the relative sensitivity of impacts to "adaptation uncertainty" (i.e., the inclusion/exclusion of adaptation modeling) relative to using multiple climate models and emissions scenarios. This study had three aims: a ) Compare the range in projected impacts that arises from using different adaptation modeling methods; b ) compare the range in impacts that arises from adaptation uncertainty with ranges from using multiple climate models and emissions scenarios; c ) recommend modeling method(s) to use in future impact assessments. We estimated impacts for 2070-2099 for 14 European cities, applying six different methods for modeling adaptation; we also estimated impacts with five climate models run under two emissions scenarios to explore the relative effects of climate modeling and emissions uncertainty. The range of the difference (percent) in impacts between including and excluding adaptation, irrespective of climate modeling and emissions uncertainty, can be as low as 28% with one method and up to 103% with another (mean across 14 cities). In 13 of 14 cities, the ranges in projected impacts due to adaptation uncertainty are larger than those associated with climate modeling and emissions uncertainty. Researchers should carefully consider how to model adaptation because it is a source of uncertainty that can be greater than the uncertainty in emissions and climate modeling. We recommend absolute threshold shifts and reductions in slope. https://doi.org/10.1289/EHP634.

Excess Mortality Attributable to Extreme Heat in New York City, 1997-2013.

Science.gov (United States)

Matte, Thomas D; Lane, Kathryn; Ito, Kazuhiko

2016-01-01

Extreme heat event excess mortality has been estimated statistically to assess impacts, evaluate heat emergency response, and project climate change risks. We estimated annual excess non-external-cause deaths associated with extreme heat events in New York City (NYC). Extreme heat events were defined as days meeting current National Weather Service forecast criteria for issuing heat advisories in NYC based on observed maximum daily heat index values from LaGuardia Airport. Outcomes were daily non-external-cause death counts for NYC residents from May through September from 1997 to 2013 (n = 337,162). The cumulative relative risk (CRR) of death associated with extreme heat events was estimated in a Poisson time-series model for each year using an unconstrained distributed lag for days 0-3 accommodating over dispersion, and adjusting for within-season trends and day of week. Attributable death counts were computed by year based on individual year CRRs. The pooled CRR per extreme heat event day was 1.11 (95%CI 1.08-1.14). The estimated annual excess non-external-cause deaths attributable to heat waves ranged from -14 to 358, with a median of 121. Point estimates of heat wave-attributable deaths were greater than 0 in all years but one and were correlated with the number of heat wave days (r = 0.81). Average excess non-external-cause deaths associated with extreme heat events were nearly 11-fold greater than hyperthermia deaths. Estimated extreme heat event-associated excess deaths may be a useful indicator of the impact of extreme heat events, but single-year estimates are currently too imprecise to identify short-term changes in risk.

Impact of the amount of working fluid in loop heat pipe to remove waste heat from electronic component

Directory of Open Access Journals (Sweden)

Smitka Martin

2014-03-01

Full Text Available One of the options on how to remove waste heat from electronic components is using loop heat pipe. The loop heat pipe (LHP is a two-phase device with high effective thermal conductivity that utilizes change phase to transport heat. It was invented in Russia in the early 1980’s. The main parts of LHP are an evaporator, a condenser, a compensation chamber and a vapor and liquid lines. Only the evaporator and part of the compensation chamber are equipped with a wick structure. Inside loop heat pipe is working fluid. As a working fluid can be used distilled water, acetone, ammonia, methanol etc. Amount of filling is important for the operation and performance of LHP. This work deals with the design of loop heat pipe and impact of filling ratio of working fluid to remove waste heat from insulated gate bipolar transistor (IGBT.

Aging Will Amplify the Heat-related Mortality Risk under a Changing Climate: Projection for the Elderly in Beijing, China

Science.gov (United States)

Li, Tiantian; Horton, Radley M.; Bader, Daniel A.; Zhou, Maigeng; Liang, Xudong; Ban, Jie; Sun, Qinghua; Kinney, Patrick L.

2016-06-01

An aging population could substantially enhance the burden of heat-related health risks in a warming climate because of their higher susceptibility to extreme heat health effects. Here, we project heat-related mortality for adults 65 years and older in Beijing China across 31 downscaled climate models and 2 representative concentration pathways (RCPs) in the 2020s, 2050s, and 2080s. Under a scenario of medium population and RCP8.5, by the 2080s, Beijing is projected to experience 14,401 heat-related deaths per year for elderly individuals, which is a 264.9% increase compared with the 1980s. These impacts could be moderated through adaptation. In the 2080s, even with the 30% and 50% adaptation rate assumed in our study, the increase in heat-related death is approximately 7.4 times and 1.3 times larger than in the 1980s respectively under a scenario of high population and RCP8.5. These findings could assist countries in establishing public health intervention policies for the dual problems of climate change and aging population. Examples could include ensuring facilities with large elderly populations are protected from extreme heat (for example through back-up power supplies and/or passive cooling) and using databases and community networks to ensure the home-bound elderly are safe during extreme heat events.

Assessing Vulnerability to Urban Heat: A Study of Disproportionate Heat Exposure and Access to Refuge by Socio-Demographic Status in Portland, Oregon

Directory of Open Access Journals (Sweden)

Jackson Voelkel

2018-03-01

Full Text Available Extreme urban heat is a powerful environmental stressor which poses a significant threat to human health and well-being. Exacerbated by the urban heat island phenomenon, heat events are expected to become more intense and frequent as climate change progresses, though we have limited understanding of the impact of such events on vulnerable populations at a neighborhood or census block group level. Focusing on the City of Portland, Oregon, this study aimed to determine which socio-demographic populations experience disproportionate exposure to extreme heat, as well as the level of access to refuge in the form of public cooling centers or residential central air conditioning. During a 2014 heat wave, temperature data were recorded using a vehicle-traverse collection method, then extrapolated to determine average temperature at the census block group level. Socio-demographic factors including income, race, education, age, and English speaking ability were tested using statistical assessments to identify significant relationships with heat exposure and access to refuge from extreme heat. Results indicate that groups with limited adaptive capacity, including those in poverty and non-white populations, are at higher risk for heat exposure, suggesting an emerging concern of environmental justice as it relates to climate change. The paper concludes by emphasizing the importance of cultural sensitivity and inclusion, in combination with effectively distributing cooling centers in areas where the greatest burden befalls vulnerable populations.

Assessing Vulnerability to Urban Heat: A Study of Disproportionate Heat Exposure and Access to Refuge by Socio-Demographic Status in Portland, Oregon.

Science.gov (United States)

Voelkel, Jackson; Hellman, Dana; Sakuma, Ryu; Shandas, Vivek

2018-03-30

Extreme urban heat is a powerful environmental stressor which poses a significant threat to human health and well-being. Exacerbated by the urban heat island phenomenon, heat events are expected to become more intense and frequent as climate change progresses, though we have limited understanding of the impact of such events on vulnerable populations at a neighborhood or census block group level. Focusing on the City of Portland, Oregon, this study aimed to determine which socio-demographic populations experience disproportionate exposure to extreme heat, as well as the level of access to refuge in the form of public cooling centers or residential central air conditioning. During a 2014 heat wave, temperature data were recorded using a vehicle-traverse collection method, then extrapolated to determine average temperature at the census block group level. Socio-demographic factors including income, race, education, age, and English speaking ability were tested using statistical assessments to identify significant relationships with heat exposure and access to refuge from extreme heat. Results indicate that groups with limited adaptive capacity, including those in poverty and non-white populations, are at higher risk for heat exposure, suggesting an emerging concern of environmental justice as it relates to climate change. The paper concludes by emphasizing the importance of cultural sensitivity and inclusion, in combination with effectively distributing cooling centers in areas where the greatest burden befalls vulnerable populations.

BUYING BEHAVIOUR RELATED TO HEATING SYSTEMS IN GERMANY

OpenAIRE

Decker, Thomas; Zapilko, Marina; Menrad, Klaus

2010-01-01

The decision for buying a heating system is a long-term one, as many different aspects have an influence on this choice which were analysed in a Germany-wide, written survey. The respondents (only owners of a private house) had to answer questions about their attitude towards e.g. economics, convenience or ecological aspects related to heating systems and the respective combustibles. Using a multinomial logistic regression model the choice of the heating system is mainly explained by ecologic...

Osteopathic Emergency Medicine Programs Infrequently Publish in High-Impact Emergency Medicine Journals

OpenAIRE

Baskin, Sean M; Lin, Christina; Carlson, Jestin N

2014-01-01

Introduction: Both the Accreditation Council for Graduate Medical Education (ACGME) and the American Osteopathic Association (AOA) require core faculty to engage in scholarly work, including publication in peer-reviewed journals. With the ACGME/AOA merger, we sought to evaluate the frequency of publication in high-impact peer-reviewed EM journals from authors affiliated with osteopathic emergency medicine (EM) programs. Methods: We performed a retrospective literature re...

Impact Toughness of Subzones in the Intercritical Heat-Affected Zone of Low-Carbon Bainitic Steel.

Science.gov (United States)

Li, Zhenshun; Zhao, Xuemin; Shan, Dongri

2018-06-06

The subzones of the intercritical heat-affected zone (IC HAZ) of low-carbon bainitic steel were simulated by using a Gleeble-3500 simulator to study the impact toughness. The results showed that the IC HAZ is not entirely brittle and can be further divided into three subzones according to the impact toughness or peak welding temperature; the invariant subzone heated between the critical transformation start temperature ( A c1 ) and 770 °C exhibited unchanged high impact toughness. Furthermore, an extremely low impact toughness was found in the embrittlement subzone, heated between 770 and 830 °C, and the reduction subzone heated between 830 °C and the critical transformation finish temperature ( A c3 ) exhibited toughness below that of the original metal. The size of the blocky martensite-austenite (M-A) constituents was found to have a remarkable level of influence on the impact toughness when heated below 830 °C. Additionally, it was found that, once the constituent size exceeds a critical value of 3.0 µm at a peak temperature of 770 °C, the IC HAZ becomes brittle regardless of lath or twinned martensite constitution in the M-A constituent. Essentially, embrittlement was observed to occur when the resolved length of initial cracks (in the direction of the overall fracture) formed as a result of the debonding of M-A constituents exceeding the critical Griffith size. Furthermore, when the heating temperature exceeded 830 °C, the M-A constituents formed a slender shape, and the impact toughness increased as the area fraction of the slender M-A constituents decreased.

System efficiency for two-step metal oxide solar thermochemical hydrogen production – Part 2: Impact of gas heat recuperation and separation temperatures

KAUST Repository

Ehrhart, Brian D.

2016-09-22

The solar-to-hydrogen (STH) efficiency is calculated for various operating conditions for a two-step metal oxide solar thermochemical hydrogen production cycle using cerium(IV) oxide. An inert sweep gas was considered as the O2 removal method. Gas and solid heat recuperation effectiveness values were varied between 0 and 100% in order to determine the limits of the effect of these parameters. The temperature at which the inert gas is separated from oxygen for an open-loop and recycled system is varied. The hydrogen and water separation temperature was also varied and the effect on STH efficiency quantified. This study shows that gas heat recuperation is critical for high efficiency cycles, especially at conditions that require high steam and inert gas flowrates. A key area for future study is identified to be the development of ceramic heat exchangers for high temperature gas-gas heat exchange. Solid heat recuperation is more important at lower oxidation temperatures that favor temperature-swing redox processing, and the relative impact of this heat recuperation is muted if the heat can be used elsewhere in the system. A high separation temperature for the recycled inert gas has been shown to be beneficial, especially for cases of lower gas heat recuperation and increased inert gas flowrates. A higher water/hydrogen separation temperature is beneficial for most gas heat recuperation effectiveness values, though the overall impact on optimal system efficiency is relatively small for the values considered. © 2016 Hydrogen Energy Publications LLC.

Environmental assessment of domestic wood heating

International Nuclear Information System (INIS)

Labouze, E.; Le Guerin, Y.

2009-01-01

In France, more than 6 million families are concerned with the domestic use of wood energy. The wood energy plan of ADEME aims at encouraging the development of wood energy in three sectors: domestic, collective/tertiary, industrial. In that context, ADEME commissioned BIO Intelligence Service a life cycle assessment of collective and industrial heating in order to give objective environmental information and to analyse the strength and weakness of wood heating. Three scenarios were defined according to the origin of wood: firewood, granules and sawmill chips. The study also proposes a comparison to other heating systems: gas, fuel oil and electricity. The life cycle analysis applied to domestic heating consists in quantifying the environmental impacts of the whole linked steps: extraction of fuel, distribution, final use... Every system under study has been divided according to three main stages: - Extraction of raw materials; - Transport of fuels until the place of storage or distribution; - Use (combustion or upstream production of energy in the case of electricity). The environmental impacts are estimated with the following indicators: - Non renewable primary energy balance sheet; - Global warming potential; - Air acidification potential; - Eutrophication potential; - Emissions of toxic metals in air and in soils. The results show that wood heating have the best energy and global warming balance sheets. For air acidification, the combustion stage is pre-dominant regardless of the energy resource. This is mainly due to nitrogen and sulphur oxides airborne emissions. For wood heating, preparation requires fuel consumption which also contributes significantly to nitrogen oxides emissions. The comparison with conventional energy shows that the wood scenarios are well positioned in relation to fuel and electricity for this indicator. Gas appears to be the best heating option for this indicator. The contribution eutrophication is also due to nitrogen oxides airborne

Analysis of ceramic materials for impact members in isotopic heat sources

International Nuclear Information System (INIS)

Simonen, F.A.; Duckworth, W.H.

1976-01-01

Of the available high strength ceramics, silicon nitride offers the most promise followed by silicon carbide and aluminum oxide, and stress analyses show severe limitations on allowable velocities for impact with granite following reentry for these ceramics. Impact velocities in the 100 to 200 fps regime can be achieved only by the addition of an additional layer to distribute the high contact stress. Besides impact limitations, application of ceramic materials in heat sources would present problems both in terms of weight and fabrication. The required thickness of a ceramic impact member would be comparable to that for a carbon-carbon composite material, but the least dense of the high strength ceramics are 2 to 3 times more dense than the carbon-carbon composites. Fabrication of a ceramic heat source would require a high strength bond between the fuel and the impact member if reasonable impact velocities are to be achieved. Formation of such a bond in ceramic materials is a difficult task under normal circumstances, and would be more difficult under the restrictions imposed on the processing and handling of the 238 PuO 2 fuel. 16 fig

Relations with parents and identity statuses in the relational domain in emerging adults

Directory of Open Access Journals (Sweden)

Justyna Michałek

2016-09-01

Full Text Available Background Emerging adulthood is a core developmental period in which individuals can develop a meaningful identity in the relational domain (with a romantic partner. The aim of the study was to examine relationships between relations with parents and identity statuses in the relational domain in emerging adults. Participants and procedure Participants were 266 (47.30% males emerging adults (M = 22.50, SD = 1.73. They completed self-report measures of relations with parents and identity. Results More than half of the participants were in the moratorium status or were not involved in a romantic relationship (35% and 29%, respectively. Relations with parents were linked to identity statuses in the relational domain. Particularly, the perception of low autonomy given by the father was related to less mature identity statuses. Conclusions This study highlighted that transition from singleness to stable partnerships seems to be challenging. Therefore, it is important to examine correlates of identity statuses in this domain.

Environmental impacts of heating systems in Germany; Umweltwirkung von Heizungssystemen in Deutschland

Energy Technology Data Exchange (ETDEWEB)

Bettgenhaeuser, Kjell; Boermans, Thomas [Ecofys Germany GmbH, Koeln (Germany)

2011-02-15

The aim of this study is a comprehensive analysis of current and innovative systems for the heating supply of residential buildings. This is based on a pre-defined supply-task - delivering heating energy, domestic hot water and ventilation for different building sizes and energy standards. The impact of a variation in the efficiency of the heating systems is been taken into account by also using a sensitivity-range of efficiencies/ COP's from field-tests. The main results are CO{sub 2}-emissions (incl. and excl. upstream chain) and primary/ end-energy demands as well as overall costs (investment- and running-costs) for the different heating systems, which are shown in overview graphs. The interpretation of the results analyses the impact of the sensitivities, gives technological limitations (i.e. with regard to the compatibility of technologies) and explains prominent effects (such as different profitabilities for same systems with a different supply-task) with regard to the aim of the study. (orig.)

Overview of chytrid emergence and impacts on amphibians

Science.gov (United States)

2016-01-01

Chytridiomycosis is an emerging infectious disease of amphibians that affects over 700 species on all continents where amphibians occur. The amphibian–chytridiomycosis system is complex, and the response of any amphibian species to chytrid depends on many aspects of the ecology and evolutionary history of the amphibian, the genotype and phenotype of the fungus, and how the biological and physical environment can mediate that interaction. Impacts of chytridiomycosis on amphibians are varied; some species have been driven extinct, populations of others have declined severely, whereas still others have not obviously declined. Understanding patterns and mechanisms of amphibian responses to chytrids is critical for conservation and management. Robust estimates of population numbers are needed to identify species at risk, prioritize taxa for conservation actions, design management strategies for managing populations and species, and to develop effective measures to reduce impacts of chytrids on amphibians. This article is part of the themed issue ‘Tackling emerging fungal threats to animal health, food security and ecosystem resilience’. PMID:28080989

An Emerging Complimentary Medicine-Yolk Oil Made from Heating Method

Directory of Open Access Journals (Sweden)

Tsung-Ming Hu

2012-07-01

Full Text Available Yolk oil is common in Asia. According to the Flora Sinensis, yolk oil is a multipurpose medicine, with specific dermatological and fever indications. Nowadays, it is generally used as a complimentary medicine for heart diseases. Yolk oil can be made from heating or chemical extraction method. It is generally believed that yolk oil made from heating (YOheat method is more effective as a medicine than that from extraction (YOext. The technical details of the heating method remain an issue of argument, including the degree of char and the threat of carcinogens formed during the heating process. Most yolk oil related studies used YOext as research material. Nevertheless, animal studies have showed that YOheat reduced triglycerides and total cholesterol in rodent liver. It is expected an easy-to-make complimentary medicine like YOheat may become even more common and thus evidence based studies should be conducted to verify its pharmacological effects and safety.

Heat-related illness in Washington State agriculture and forestry sectors.

Science.gov (United States)

Spector, June T; Krenz, Jennifer; Rauser, Edmund; Bonauto, David K

2014-08-01

We sought to describe heat-related illness (HRI) in agriculture and forestry workers in Washington State. Demographic and clinical Washington State Fund workers' compensation agriculture and forestry HRI claims data (1995-2009) and Washington Agriculture Heat Rule citations (2009-2012) were accessed and described. Maximum daily temperature (Tmax) and Heat Index (HImax) were estimated by claim date and location using AgWeatherNet's weather station network. There were 84 Washington State Fund agriculture and forestry HRI claims and 60 Heat Rule citations during the study period. HRI claims and citations were most common in crop production and support subsectors. The mean Tmax (HImax) was 95°F (99°F) for outdoor HRI claims. Potential HRI risk factors and HRI-related injuries were documented for some claims. Agriculture and forestry HRI cases are characterized by potential work-related, environmental, and personal risk factors. Further work is needed to elucidate the relationship between heat exposure and occupational injuries. © 2014 Wiley Periodicals, Inc.

Temperature Observation Time and Type Influence Estimates of Heat-Related Mortality in Seven U.S. Cities.

Science.gov (United States)

Davis, Robert E; Hondula, David M; Patel, Anjali P

2016-06-01

Extreme heat is a leading weather-related cause of mortality in the United States, but little guidance is available regarding how temperature variable selection impacts heat-mortality relationships. We examined how the strength of the relationship between daily heat-related mortality and temperature varies as a function of temperature observation time, lag, and calculation method. Long time series of daily mortality counts and hourly temperature for seven U.S. cities with different climates were examined using a generalized additive model. The temperature effect was modeled separately for each hour of the day (with up to 3-day lags) along with different methods of calculating daily maximum, minimum, and mean temperature. We estimated the temperature effect on mortality for each variable by comparing the 99th versus 85th temperature percentiles, as determined from the annual time series. In three northern cities (Boston, MA; Philadelphia, PA; and Seattle, WA) that appeared to have the greatest sensitivity to heat, hourly estimates were consistent with a diurnal pattern in the heat-mortality response, with strongest associations for afternoon or maximum temperature at lag 0 (day of death) or afternoon and evening of lag 1 (day before death). In warmer, southern cities, stronger associations were found with morning temperatures, but overall the relationships were weaker. The strongest temperature-mortality relationships were associated with maximum temperature, although mean temperature results were comparable. There were systematic and substantial differences in the association between temperature and mortality based on the time and type of temperature observation. Because the strongest hourly temperature-mortality relationships were not always found at times typically associated with daily maximum temperatures, temperature variables should be selected independently for each study location. In general, heat-mortality was more closely coupled to afternoon and maximum

Modelling the impact of urban form on household energy demand and related CO2 emissions in the Greater Dublin Region

International Nuclear Information System (INIS)

Liu Xiaochen; Sweeney, John

2012-01-01

This study aims to investigate the relationship between household space heating energy use and urban form (land use characteristics) for the Greater Dublin Region. The geographical distributions of household energy use are evaluated at the Enumeration Districts (ED) level based on the building thermal balance model. Moreover, it estimates the impact of possible factors on the household space heating consumption. Results illustrate that the distribution profile of dwellings is a significant factor related to overall heating energy demand and individual dwelling energy consumption for space heating. Residents living in compact dwellings with small floor areas consume less energy for space heating than residents living in dwellings with big floor areas. Moreover, domestic heating energy demand per household was also estimated for two extreme urban development scenarios: the compact city scenario and the dispersed scenario. The results illustrate that the compact city scenario is likely to decrease the domestic heating energy consumption per household by 16.2% compared with the dispersed city scenario. Correspondingly, the energy-related CO 2 emissions could be significantly decreased by compact city scenario compared with the dispersed city scenario. - Highlights: ► A method was developed to investigate urban form impacts on energy demand. ► This study estimates impacts of possible factors on the household energy consumption. ► Household heating energy demand is sensitive to dwelling distribution profile. ► The compact case could reduce domestic energy demand compared with the dispersed case.

The impact of heat waves and cold spells on mortality rates in the Dutch population

NARCIS (Netherlands)

Huynen, M. M.; Martens, P.; Schram, D.; Weijenberg, M. P.; Kunst, A. E.

2001-01-01

We conducted the study described in this paper to investigate the impact of ambient temperature on mortality in the Netherlands during 1979-1997, the impact of heat waves and cold spells on mortality in particular, and the possibility of any heat wave- or cold spell-induced forward displacement of

Diversified emergency core cooling in CANDU with a passive moderator heat rejection system

Energy Technology Data Exchange (ETDEWEB)

Spinks, N [AECL Research, Chalk River Labs., Chalk River, ON (Canada)

1996-12-01

A passive moderator heat rejection system is being developed for CANDU reactors which, combined with a conventional emergency-coolant injection system, provides the diversity to reduce core-melt frequency to order 10{sup -7} per unit-year. This is similar to the approach used in the design of contemporary CANDU shutdown systems which leads to a frequency of order 10{sup -8} per unit-year for events leading to loss of shutdown. Testing of a full height 1/60 power-and-volume-scaled loop has demonstrated the feasibility of the passive system for removal of moderator heat during normal operation and during accidents. With the frequency of core-melt reduced, by these measures, to order 10{sup -7} per unit year, no need should exist for further mitigation. (author). 3 refs, 2 figs.

Impact Toughness of Subzones in the Intercritical Heat-Affected Zone of Low-Carbon Bainitic Steel

Directory of Open Access Journals (Sweden)

Zhenshun Li

2018-06-01

Full Text Available The subzones of the intercritical heat-affected zone (IC HAZ of low-carbon bainitic steel were simulated by using a Gleeble-3500 simulator to study the impact toughness. The results showed that the IC HAZ is not entirely brittle and can be further divided into three subzones according to the impact toughness or peak welding temperature; the invariant subzone heated between the critical transformation start temperature (Ac1 and 770 °C exhibited unchanged high impact toughness. Furthermore, an extremely low impact toughness was found in the embrittlement subzone, heated between 770 and 830 °C, and the reduction subzone heated between 830 °C and the critical transformation finish temperature (Ac3 exhibited toughness below that of the original metal. The size of the blocky martensite-austenite (M-A constituents was found to have a remarkable level of influence on the impact toughness when heated below 830 °C. Additionally, it was found that, once the constituent size exceeds a critical value of 3.0 µm at a peak temperature of 770 °C, the IC HAZ becomes brittle regardless of lath or twinned martensite constitution in the M-A constituent. Essentially, embrittlement was observed to occur when the resolved length of initial cracks (in the direction of the overall fracture formed as a result of the debonding of M-A constituents exceeding the critical Griffith size. Furthermore, when the heating temperature exceeded 830 °C, the M-A constituents formed a slender shape, and the impact toughness increased as the area fraction of the slender M-A constituents decreased.

The impact of heat waves on mortality in seven major cities in Korea.

Science.gov (United States)

Son, Ji-Young; Lee, Jong-Tae; Anderson, G Brooke; Bell, Michelle L

2012-04-01

Understanding the health impacts of heat waves is important, especially given anticipated increases in the frequency, duration, and intensity of heat waves due to climate change. We examined mortality from heat waves in seven major Korean cities for 2000 through 2007 and investigated effect modification by individual characteristics and heat wave characteristics (intensity, duration, and timing in season). Heat waves were defined as ≥ 2 consecutive days with daily mean temperature at or above the 98th percentile for the warm season in each city. We compared mortality during heat-wave days and non-heat-wave days using city-specific generalized linear models. We used Bayesian hierarchical models to estimate overall effects within and across all cities. In addition, we estimated effects of heat wave characteristics and effects according to cause of death and examined effect modification by individual characteristics for Seoul. Overall, total mortality increased 4.1% [95% confidence interval (CI): -6.1%, 15.4%] during heat waves compared with non-heat-wave days, with an 8.4% increase (95% CI: 0.1%, 17.3%) estimated for Seoul. Estimated mortality was higher for heat waves that were more intense, longer, or earlier in summer, although effects were not statistically significant. Estimated risks were higher for women versus men, older versus younger residents, those with no education versus some education, and deaths that occurred out of hospitals in Seoul, although differences among strata of individual characteristics were not statistically significant. Our findings support evidence of mortality impacts from heat waves and have implications for efforts to reduce the public health burden of heat waves.

The potential impacts of climate variability and change on temperature-related morbidity and mortality in the United States.

Science.gov (United States)

McGeehin, M A; Mirabelli, M

2001-05-01

Heat and heat waves are projected to increase in severity and frequency with increasing global mean temperatures. Studies in urban areas show an association between increases in mortality and increases in heat, measured by maximum or minimum temperature, heat index, and sometimes, other weather conditions. Health effects associated with exposure to extreme and prolonged heat appear to be related to environmental temperatures above those to which the population is accustomed. Models of weather-mortality relationships indicate that populations in northeastern and midwestern U.S. cities are likely to experience the greatest number of illnesses and deaths in response to changes in summer temperature. Physiologic and behavioral adaptations may reduce morbidity and mortality. Within heat-sensitive regions, urban populations are the most vulnerable to adverse heat-related health outcomes. The elderly, young children, the poor, and people who are bedridden or are on certain medications are at particular risk. Heat-related illnesses and deaths are largely preventable through behavioral adaptations, including the use of air conditioning and increased fluid intake. Overall death rates are higher in winter than in summer, and it is possible that milder winters could reduce deaths in winter months. However, the relationship between winter weather and mortality is difficult to interpret. Other adaptation measures include heat emergency plans, warning systems, and illness management plans. Research is needed to identify critical weather parameters, the associations between heat and nonfatal illnesses, the evaluation of implemented heat response plans, and the effectiveness of urban design in reducing heat retention.

Effectiveness of Different Urban Heat Island Mitigation Methods and Their Regional Impacts

Science.gov (United States)

Zhang, N.

2017-12-01

Cool roofs and green roofs are two popular methods to mitigate urban heat island and improve urban climate. The effectiveness of different urban heat island mitigation strategies in the summer of 2013 in the Yangtze River Delta, China is investigated using the WRF (Weather Research and Forecasting) model coupled with a physically based urban canopy model. The modifications to the roof surface changed the urban surface radiation balance and then modified the local surface energy budget. Both cool roofs and green roofs led to lower surface skin temperature and near-surface air temperature. Increasing the roof albedo to 0.5 caused a similar effectiveness as covering 25% of urban roofs with vegetation; increasing roof albedo to 0.7 caused a similar near-surface air temperature decrease as 75% green roof coverage. The near-surface relative humidity increased in both cool roof and green roof experiments because of the combination of the impacts of increases in specific humidity and decreases in air temperature. The regional impacts of cool roofs and green roofs were evaluated using the regional effect index. The regional effect could be found in both near-surface air temperature and surface specific/relative humidity when the percentage of roofs covered with high albedo materials or green roofs reached a higher fraction (greater than 50%). The changes in the vertical profiles of temperature cause a more stable atmospheric boundary layer over the urban area; at the same time, the crossover phenomena occurred above the boundary layer due to the decrease in vertical wind speed.

Factors Affecting Impact Toughness in Stabilized Intermediate Purity 21Cr Ferritic Stainless Steels and Their Simulated Heat-Affected Zones

Science.gov (United States)

Anttila, Severi; Alatarvas, Tuomas; Porter, David A.

2017-12-01

The correlation between simulated weld heat-affected zone microstructures and toughness parameters has been investigated in four intermediate purity 21Cr ferritic stainless steels stabilized with titanium and niobium either separately or in combination. Extensive Charpy V impact toughness testing was carried out followed by metallography including particle analysis using electron microscopy. The results confirmed that the grain size and the number density of particle clusters rich in titanium nitride and carbide with an equivalent circular diameter of 2 µm or more are statistically the most critical factors influencing the ductile-to-brittle transition temperature. Other inclusions and particle clusters, as well as grain boundary precipitates, are shown to be relatively harmless. Stabilization with niobium avoids large titanium-rich inclusions and also suppresses excessive grain growth in the heat-affected zone when reasonable heat inputs are used. Thus, in order to maximize the limited heat-affected zone impact toughness of 21Cr ferritic stainless steels containing 380 to 450 mass ppm of interstitials, the stabilization should be either titanium free or the levels of titanium and nitrogen should be moderated.

Study on Spheroidization and Related Heat Treatments of Medium Carbon Alloy Steels

Directory of Open Access Journals (Sweden)

Harisha S. R.

2018-01-01

Full Text Available The importance of medium carbon steels as engineering materials is reflected by the fact that out of the vast majority of engineering grade ferrous alloys available and used in the market today, a large proportion of them are from the family of medium carbon steels. Typically medium carbon steels have a carbon range of 0.25 to 0.65% by weight, and a manganese content ranging from 0.060 to 1.65% by weight. Medium carbon steels are more resistive to cutting, welding and forming as compared to low carbon steels. From the last two decades a number of research scholars reported the use of verity of heat treatments to tailor the properties of medium carbon steels. Spheroidizing is the novel industrial heat treatment employed to improve formability and machinability of medium/high carbon low alloy steels. This exclusive study covers procedure, the effects and possible outcomes of various heat treatments on medium carbon steels. In the present work, other related heat treatments like annealing and special treatments for property alterations which serve as pretreatments for spheroidizing are also reviewed. Medium carbon steels with property alterations by various heat treatment processes are finding increased responsiveness in transportation, aerospace, space, underwater along with other variegated fields. Improved tribological and mechanical properties consisting of impact resistance, stiffness, abrasion and strength are the main reasons for the increased attention of these steels in various industries. In the present scenario for the consolidation of important aspects of various heat treatments and effects on mechanical properties of medium carbons steel, a review of different research papers has been attempted. This review may be used as a guide to provide practical data for heat treatment industry, especially as a tool to enhance workability and tool life.

Entropic Constitutive Relation and Modeling for Fourier and Hyperbolic Heat Conductions

Directory of Open Access Journals (Sweden)

Shu-Nan Li

2017-12-01

Full Text Available Most existing phenomenological heat conduction models are expressed by temperature and heat flux distributions, whose definitions might be debatable in heat conductions with strong non-equilibrium. The constitutive relations of Fourier and hyperbolic heat conductions are here rewritten by the entropy and entropy flux distributions in the frameworks of classical irreversible thermodynamics (CIT and extended irreversible thermodynamics (EIT. The entropic constitutive relations are then generalized by Boltzmann–Gibbs–Shannon (BGS statistical mechanics, which can avoid the debatable definitions of thermodynamic quantities relying on local equilibrium. It shows a possibility of modeling heat conduction through entropic constitutive relations. The applicability of the generalizations by BGS statistical mechanics is also discussed based on the relaxation time approximation, and it is found that the generalizations require a sufficiently small entropy production rate.

Does Implementation of Biomathematical Models Mitigate Fatigue and Fatigue-related Risks in Emergency Medical Services Operations? A Systematic Review

Science.gov (United States)

2018-01-11

Background: Work schedules like those of Emergency Medical Services (EMS) personnel have been associated with increased risk of fatigue-related impairment. Biomathematical modeling is a means of objectively estimating the potential impacts of fatigue...

Heat Roadmap Europe

DEFF Research Database (Denmark)

Connolly, David; Mathiesen, Brian Vad; Lund, Henrik

2015-01-01

This document is a summary of the key technical inputs for the modelling of the heat strategy for Europe outlined in the latest Heat Roadmap Europe studies [1, 2]. These studies quantify the impact of alternative heating strategies for Europe in 2030 and 2050. The study is based on geographical...... information systems (GIS) and energy system analyses. In this report, the inputs for other modelling tools such as PRIMES are presented, in order to enable other researches to generate similar heating scenarios for Europe. Although Heat Roadmap Europe presents a complete heat strategy for Europe, which...... includes energy efficiency, individual heating units (such as boilers and heat pumps), and heat networks, the recommendations here are primarily relating to the potential and modelling of district heating. Although other solutions will play a significant role in decarbonising the heating and cooling sector...

Fitness-related differences in the rate of whole-body evaporative heat loss in exercising men are heat-load dependent.

Science.gov (United States)

Lamarche, Dallon T; Notley, Sean R; Louie, Jeffrey C; Poirier, Martin P; Kenny, Glen P

2018-01-01

What is the central question of this study? Aerobic fitness modulates heat loss, but the heat-load threshold at which fitness-related differences in heat loss occur in young healthy men remains unclear. What is the main finding and its importance? We demonstrate using direct calorimetry that aerobic fitness modulates heat loss in a heat-load-dependent manner, with fitness-related differences occurring between young men who have low and high fitness when the heat load is ∼≥500 W. Although aerobic fitness has been known for some time to modulate heat loss, our findings define the precise heat-load threshold at which fitness-related differences occur. The effect of aerobic fitness (defined as rate of peak oxygen consumption) on heat loss during exercise is thought to be related to the level of heat stress. However, it remains unclear at what combined exercise and environmental (net) heat-load threshold these fitness-related differences occur. To identify this, we assessed whole-body heat exchange (dry and evaporative) by direct calorimetry in young (22 ± 3 years) men matched for physical characteristics with low (Low-fit; 39.8 ± 2.5 ml O 2  kg -1  min -1 ), moderate (Mod-fit; 50.9 ± 1.2 ml O 2  kg -1  min -1 ) and high aerobic fitness (High-fit; 62.0 ± 4.4 ml O 2  kg -1  min -1 ; each n = 8), during three 30 min bouts of cycling in dry heat (40°C, 12% relative humidity) at increasing rates of metabolic heat production of 300 (Ex1), 400 (Ex2) and 500 W (Ex3), each followed by a 15 min recovery period. Each group was exposed to a similar net heat load (metabolic plus ∼100 W dry heat gain; P = 0.83) during each exercise bout [∼400 (Ex1), ∼500 (Ex2) and ∼600 W (Ex3); P fit (Ex2, 466 ± 21 W; Ex3, 557 ± 26 W) compared with the Low-fit group (Ex2, 439 ± 22 W; Ex3, 511 ± 20 W) during Ex2 and Ex3 (P ≤ 0.03). Conversely, evaporative heat loss for the Mod-fit group did not differ from either the High-fit or Low

Impact of two recent extreme heat episodes on morbidity and mortality in Adelaide, South Australia: a case-series analysis

Directory of Open Access Journals (Sweden)

Williams Susan

2011-05-01

Full Text Available Abstract Background Extreme heatwaves occurred in Adelaide, South Australia, in the summers of 2008 and 2009. Both heatwaves were unique in terms of their duration (15 days and 13 days respectively, and the 2009 heatwave was also remarkable in its intensity with a maximum temperature reaching 45.7°C. It is of interest to compare the health impacts of these two unprecedented heatwaves with those of previous heatwaves in Adelaide. Methods Using case-series analysis, daily morbidity and mortality rates during heatwaves (≥35°C for three or more days occurring in 2008 and 2009 and previous heatwaves occurring between 1993 and 2008 were compared with rates during all non-heatwave days (1 October to 31 March. Incidence rate ratios (IRRs were established for ambulance call-outs, hospital admissions, emergency department presentations and mortality. Dose response effects of heatwave duration and intensity were examined. Results Ambulance call-outs during the extreme 2008 and 2009 events were increased by 10% and 16% respectively compared to 4.4% during previous heatwaves. Overall increases in hospital and emergency settings were marginal, except for emergency department presentations in 2008, but increases in specific health categories were observed. Renal morbidity in the elderly was increased during both heatwaves. During the 2009 heatwave, direct heat-related admissions increased up to 14-fold compared to a three-fold increase seen during the 2008 event and during previous heatwaves. In 2009, marked increases in ischaemic heart disease were seen in the 15-64 year age group. Only the 2009 heatwave was associated with considerable increases in total mortality that particularly affected the 15-64 year age group (1.37; 95% CI, 1.09, 1.71, while older age groups were unaffected. Significant dose-response relationships were observed for heatwave duration (ambulance, hospital and emergency setting and intensity (ambulance and mortality. Conclusions While

Method of relative comparison of the thermohydraulic efficiency of heat exchange intensification in channels of heat-exchange surfaces

International Nuclear Information System (INIS)

Dubrovskij, E.V.; Vasil'ev, V.Ya.

2002-01-01

One introduces a technique to compare relatively thermohydraulic efficiency of heat transfer intensification in channels of heat exchange surfaces of any design types. It is shown that one should compare thermohydraulic efficiency of heat exchange intensification as to the thermal power of heat exchangers and pressure losses in channels with turbulators and in polished channels of heat exchange surfaces on the basis of dimensions of heat exchangers, their heat exchange surfaces and at similar (as to Re numbers) modes of coolant flow [ru

Sports-Related Emergency Preparedness in Oregon High Schools.

Science.gov (United States)

Johnson, Samuel T; Norcross, Marc F; Bovbjerg, Viktor E; Hoffman, Mark A; Chang, Eunwook; Koester, Michael C

Best practice recommendations for sports-related emergency preparation include implementation of venue-specific emergency action plans (EAPs), access to early defibrillation, and first responders-specifically coaches-trained in cardiopulmonary resuscitation and automated external defibrillator (AED) use. The objective was to determine whether high schools had implemented these 3 recommendations and whether schools with a certified athletic trainer (AT) were more likely to have done so. Schools with an AT were more likely to have implemented the recommendations. Cross-sectional study. Level 4. All Oregon School Activities Association member school athletic directors were invited to complete a survey on sports-related emergency preparedness and AT availability at their school. Chi-square and Fisher exact tests were used to analyze the associations between emergency preparedness and AT availability. In total, 108 respondents (37% response rate) completed the survey. Exactly half reported having an AT available. Only 11% (95% CI, 6%-19%) of the schools had implemented all 3 recommendations, 29% (95% CI, 21%-39%) had implemented 2, 32% (95% CI, 24%-42%) had implemented 1, and 27% (95% CI, 19%-36%) had not implemented any of the recommendations. AT availability was associated with implementation of the recommendations (χ 2 = 10.3, P = 0.02), and the proportion of schools with ATs increased with the number of recommendations implemented (χ 2 = 9.3, P Schools with an AT were more likely to implement venue-specific EAPs (52% vs 24%, P schools were inadequately prepared for sports-related emergencies. Schools with an AT were more likely to implement some, but not all, of the recommendations. Policy changes may be needed to improve implementation. Most Oregon high schools need to do more to prepare for sports-related emergencies. The results provide evidence for sports medicine professionals and administrators to inform policy changes that ensure the safety of athletes.

Impact of ambient air temperature and heat load variation on the performance of air-cooled heat exchangers in propane cycles in LNG plants – Analytical approach

International Nuclear Information System (INIS)

Fahmy, M.F.M.; Nabih, H.I.

2016-01-01

Highlights: • An analytical method regulated the air flow rate in an air-cooled heat exchanger. • Performance of an ACHE in a propane cycle in an LNG plant was evaluated. • Summer inlet air temperature had higher impact on ACHE air flow rate requirement. - Abstract: An analytical method is presented to evaluate the air flow rate required in an air-cooled heat exchanger used in a propane pre-cooling cycle operating in an LNG (liquefied natural gas) plant. With variable ambient air inlet temperature, the air flow rate is to be increased or decreased so as to assure and maintain good performance of the operating air-cooled heat exchanger at the designed parameters and specifications. This analytical approach accounts for the variations in both heat load and ambient air inlet temperature. The ambient air inlet temperature is modeled analytically by simplified periodic relations. Thus, a complete analytical method is described so as to manage the problem of determining and accordingly regulate, either manually or automatically, the flow rate of air across the finned tubes of the air-cooled heat exchanger and thus, controls the process fluid outlet temperature required for the air-cooled heat exchangers for both cases of constant and varying heat loads and ambient air inlet temperatures. Numerical results are obtained showing the performance of the air-cooled heat exchanger of a propane cycle which cools both NG (natural gas) and MR (mixed refrigerant) streams in the LNG plant located at Damietta, Egypt. The inlet air temperature variation in the summer time has a considerable effect on the required air mass flow rate, while its influence becomes relatively less pronounced in winter.

Experimental screening of carbon-base materials for impact members in isotopic heat sources

International Nuclear Information System (INIS)

Bansal, G.K.; Duckworth, W.H.

1976-11-01

Fourteen C/C composites and three reentry-grade bulk graphites were evaluated experimentally to determine their applicability for impact member use in radioisotope heat sources. The composites included the following generic types: (1) 2-D cloth lay-ups; (2) 2-D and 3-D felts; (3) 3-D weaves; (4) 3-D pierced fabrics; (5) 7-D weave; and (6) coarse polar weave. Also included was the 2-D randomly wound, resin-impregnated C/C material presently used as the impact member in the MHW RTG and commonly designated ''GIS'' (an acronym for graphite impact shell). The various materials were evaluated as energy absorbing materials. None of the materials in these tests performed appreciably better than the GIS impact member material now used in the MHW heat source, HITCO Pyro Carb 814. Two cloth lay-up composites, HITCO's Pyro Carb 903 and Carborundum's Carbitex 700, were somewhat superior in performance, while the bulk graphites and felt-base composites ranked least effective as energy absorbers. All experimental data and other factors considered to date suggest that Pyro Carb 903 is the best prospect for a bifunctional heat shield and impact member. Its high density (1.80 g/cm 3 ) indicates potentially good ablation resistance to accompany its indicated good performance as an energy absorber

Nurses' perception of nursing workforce and its impact on the managerial outcomes in emergency departments.

Science.gov (United States)

Hu, Yi-Chun; Chen, Jih-Chang; Chiu, Hsiao-Ting; Shen, Hsi-Che; Chang, Wen-Yin

2010-06-01

(1) To understand nurses' subjective perceptions of the current nursing workforce in their emergency departments, (2) to examine the relationship between nurses' workforce perceptions and its impact on the managerial outcomes and (3) to analyse the correlation between nurses' characteristics and the scores on workforce perception. While the association between workforce perceptions and nurse outcomes is well-documented, few studies have examined how emergency department nurses perceive current workforce and related outcomes. A cross-sectional questionnaire survey. A self-reported workforce perception questionnaire was used to survey 538 registered nurses in the emergency departments of 19 hospitals in northern Taiwan, during May to October 2006. Data were analysed using descriptive statistics, chi-square test, independent t-test, Pearson correlation and one-way anova. The mean score of workforce perception was 6.28 points (total = 10 points). Both overtime (p = 0.02) and number of callbacks on days off (p = 0.01) were significantly correlated to current nursing workforce and hospital level. Older nurses tended to have more emergency department experience (r = 0.37; p = 0.01) and those with more emergency department experience tended to have vacation accumulation (r = 0.09; p = 0.04), overtime (r = 0.10; p = 0.03) and better perception of their emergency department's current workforce (r = 0.09; p = 0.05). Although nurses' perceptions were found to be only moderate, overtime and number of callbacks on days off are potential problems that should be addressed by nursing leaders to benefit future emergency nurses. The findings can help drive strategies to ensure adequate staffing, to stabilise the nursing workforce and to prevent nurses from burnout factors such as working long hours, unpredictable schedules and a stressful work environment that may impact both the quality of emergency care and the quality of the nurses' work environment.

Simulating the Impacts of Climate Extremes Across Sectors: The Case of the 2003 European Heat Wave

Science.gov (United States)

Schewe, J.; Zhao, F.; Reyer, C.; Breuer, L.; Coll, M.; Deryng, D.; Eddy, T.; Elliott, J. W.; Francois, L. M.; Friend, A. D.; Gerten, D.; Gosling, S.; Gudmundsson, L.; Huber, V.; Kim, H.; Lotze, H. K.; Orth, R.; Seneviratne, S. I.; Tittensor, D.; Vautard, R.; van Vliet, M. T. H.; Wada, Y.

2017-12-01

Increased occurrence of extreme climate or weather events is one of the most damaging consequences of global climate change today and in the future. Estimating the impacts of such extreme events across different human and natural systems is crucial for quantifying overall risks from climate change. Are current models fit for this task? Here we use the 2003 European heat wave and drought (EHW) as a historical analogue for comparable events in the future, and evaluate how accurately its impacts are reproduced by a multi-sectoral "super-ensemble" of state-of-the-art impacts models. Our study combines, for the first time, impacts on agriculture, freshwater resources, terrestrial and marine ecosystems, energy, and human health in a consistent multi-model framework. We identify key impacts of the 2003 EHW reported in the literature and/or recorded in publicly available databases, and examine how closely the models reproduce those impacts, applying the same measure of impact magnitude across different sectors. Preliminary results are mixed: While the EHW's impacts on water resources (streamflow) are reproduced well by most global hydrological models, not all crop and natural vegetation models reproduce the magnitude of impacts on agriculture and ecosystem productivity, respectively, and their performance varies by country or region. A hydropower capacity model matches reported hydropower generation anomalies only in some countries, and estimates of heat-related excess mortality from a set of statistical models are consistent with literature reports only for some of the cities investigated. We present a synthesis of simulated and observed impacts across sectors, and reflect on potential improvements in modeling and analyzing cross-sectoral impacts.

Emissions pathways, climate change, and impacts on California

Science.gov (United States)

Hayhoe, Katharine; Cayan, Daniel; Field, Christopher B.; Frumhoff, Peter C.; Maurer, Edwin P.; Miller, Norman L.; Moser, Susanne C.; Schneider, Stephen H.; Cahill, Kimberly Nicholas; Cleland, Elsa E.; Dale, Larry; Drapek, Ray; Hanemann, R. Michael; Kalkstein, Laurence S.; Lenihan, James; Lunch, Claire K.; Neilson, Ronald P.; Sheridan, Scott C.; Verville, Julia H.

2004-01-01

The magnitude of future climate change depends substantially on the greenhouse gas emission pathways we choose. Here we explore the implications of the highest and lowest Intergovernmental Panel on Climate Change emissions pathways for climate change and associated impacts in California. Based on climate projections from two state-of-the-art climate models with low and medium sensitivity (Parallel Climate Model and Hadley Centre Climate Model, version 3, respectively), we find that annual temperature increases nearly double from the lower B1 to the higher A1fi emissions scenario before 2100. Three of four simulations also show greater increases in summer temperatures as compared with winter. Extreme heat and the associated impacts on a range of temperature-sensitive sectors are substantially greater under the higher emissions scenario, with some interscenario differences apparent before midcentury. By the end of the century under the B1 scenario, heatwaves and extreme heat in Los Angeles quadruple in frequency while heat-related mortality increases two to three times; alpine/subalpine forests are reduced by 50–75%; and Sierra snowpack is reduced 30–70%. Under A1fi, heatwaves in Los Angeles are six to eight times more frequent, with heat-related excess mortality increasing five to seven times; alpine/subalpine forests are reduced by 75–90%; and snowpack declines 73–90%, with cascading impacts on runoff and streamflow that, combined with projected modest declines in winter precipitation, could fundamentally disrupt California's water rights system. Although interscenario differences in climate impacts and costs of adaptation emerge mainly in the second half of the century, they are strongly dependent on emissions from preceding decades. PMID:15314227

Pediatric volleyball-related injuries treated in US emergency departments, 1990-2009.

Science.gov (United States)

Pollard, Katherine A; Shields, Brenda J; Smith, Gary A

2011-09-01

This study describes the epidemiology of pediatric volleyball-related injuries treated in US hospital emergency departments. Data for children younger than 18 years obtained from the National Electronic Injury Surveillance System of the US Consumer Product Safety Commission from 1990 through 2009 were analyzed. An estimated 692 024 volleyball-related injuries to children younger than 18 years occurred during the study period. The annual number of injuries declined significantly by 23% during the study period; however, the annual injury rate remained unchanged, and the number of volleyball-related concussions/closed head injuries increased significantly. Upper (48%) and lower (39%) extremity injuries occurred most frequently, as did strains/sprains (54%). Contact with the net/pole was associated with concussions/closed head injury our findings indicate opportunities for making volleyball an even safer sport for children. Protective padding, complying with US volleyball standards, should cover all volleyball poles and protruding hardware to prevent impact-related injuries.

Aging Will Amplify the Heat-Related Mortality Risk Under a Changing Climate: Projection for the Elderly in Beijing, China

Science.gov (United States)

Li, Tiantian; Horton, Radley M.; Bader, Daniel A.; Zhou, Maigeng; Liang, Xudong; Ban, Jie; Sun, Qinghua; Kinney, Patrick L.

2016-01-01

An aging population could substantially enhance the burden of heat-related health risks in a warming climate because of their higher susceptibility to extreme heat health effects. Here, we project heatrelated mortality for adults 65 years and older in Beijing China across 31 downscaled climate models and 2 representative concentration pathways (RCPs) in the 2020s, 2050s, and 2080s. Under a scenario of medium population and RCP8.5, by the 2080s, Beijing is projected to experience 14,401 heat-related deaths per year for elderly individuals, which is a 264.9% increase compared with the 1980s. These impacts could be moderated through adaptation. In the 2080s, even with the 30% and 50% adaptation rate assumed in our study, the increase in heat-related death is approximately 7.4 times and 1.3 times larger than in the 1980s respectively under a scenario of high population and RCP8.5. These findings could assist countries in establishing public health intervention policies for the dual problems of climate change and aging population. Examples could include ensuring facilities with large elderly populations are protected from extreme heat (for example through back-up power supplies and/or passive cooling) and using databases and community networks to ensure the home-bound elderly are safe during extreme heat events.

Knowledge and awareness of heat-related morbidity among adult recreational endurance athletes

Science.gov (United States)

Shendell, Derek G.; Alexander, Melannie S.; Lorentzson, Lauren; McCarty, Frances A.

2010-07-01

Adults have been increasingly motivated to compete in recreational endurance sports events. Amateurs may lack a complete understanding of recommended strategies for handling heat and humidity, making heat-related illnesses increasingly possible. This is compounded by global climate change and increasing average surface and air temperatures, especially in urban areas of industrialized nations in Europe and North America that have hosted most events to date. We conducted an on-line, secure survey at the 2nd Annual ING Georgia Marathon and Half-Marathon in Atlanta, Georgia, in 2008. We included previously validated questions on participant socio-demographics, training locations, and knowledge and awareness of heat-related illnesses. Participants were aware of heat illnesses, and of heat stroke as a serious form of heat stress. However, the majority, across age and gender, did not understand the potential severity of heat stroke. Furthermore, 1-in-5 participants did not understand the concept of heat stress as a form of heat-related illness, and how heat stress may result from buildup of muscle-generated heat in the body. Adult recreational endurance athletes are another susceptible, vulnerable population sub-group for applied research and public health educational interventions, especially in urban areas of industrialized nations in Europe and North America.

Impacts of Climate Modes on Air–Sea Heat Exchange in the Red Sea

KAUST Repository

Abualnaja, Yasser; Papadopoulos, Vassilis P.; Josey, Simon A.; Hoteit, Ibrahim; Kontoyiannis, Harilaos; Raitsos, Dionysios E.

2015-01-01

The impacts of various climate modes on the Red Sea surface heat exchange are investigated using the MERRA reanalysis and the OAFlux satellite reanalysis datasets. Seasonality in the atmospheric forcing is also explored. Mode impacts peak during

Towards More Comprehensive Projections of Urban Heat-Related Mortality: Estimates for New York City Under Multiple Population, Adaptation, and Climate Scenarios

Science.gov (United States)

Petkova, Elisaveta P.; Vink, Jan K.; Horton, Radley M.; Gasparrini, Antonio; Bader, Daniel A.; Francis, Joe D.; Kinney, Patrick L.

2016-01-01

High temperatures have substantial impacts on mortality and, with growing concerns about climate change, numerous studies have developed projections of future heat-related deaths around the world. Projections of temperature-related mortality are often limited by insufficient information necessary to formulate hypotheses about population sensitivity to high temperatures and future demographics. This study has derived projections of temperature-related mortality in New York City by taking into account future patterns of adaptation or demographic change, both of which can have profound influences on future health burdens. We adopt a novel approach to modeling heat adaptation by incorporating an analysis of the observed population response to heat in New York City over the course of eight decades. This approach projects heat-related mortality until the end of the 21st century based on observed trends in adaptation over a substantial portion of the 20th century. In addition, we incorporate a range of new scenarios for population change until the end of the 21st century. We then estimate future heat-related deaths in New York City by combining the changing temperature-mortality relationship and population scenarios with downscaled temperature projections from the 33 global climate models (GCMs) and two Representative Concentration Pathways (RCPs).The median number of projected annual heat-related deaths across the 33 GCMs varied greatly by RCP and adaptation and population change scenario, ranging from 167 to 3331 in the 2080s compared to 638 heat-related deaths annually between 2000 and 2006.These findings provide a more complete picture of the range of potential future heat-related mortality risks across the 21st century in New York, and highlight the importance of both demographic change and adaptation responses in modifying future risks.

Complex emergencies in the Eastern Mediterranean Region: Impact on tuberculosis control.

Science.gov (United States)

Seita, Akihiro

2016-12-01

The Eastern Mediterranean Region (EMR) has witnessed the largest refugee crisis in history. Overall, 70% of the global refugee populations are from Palestine, Syria, Afghanistan, or Somalia. We reviewed the possible impact of such crisis on the tuberculosis situation in EMR. We used the available data and information from the World Health Organization and other international and national institutions. Overall, 15 out of 22 countries in the EMR are either engulfed in complex emergencies (10 countries) or suffering from their neighbors' complex emergencies (7 countries), whereas two countries suffer from both. Eighty-five percent of the total population (636 million) in the region lives in these 15 countries. For tuberculosis, these 15 countries account for a significant burden in EMR: 94% of the estimated total incidence of 740,000 cases a year and 95% of the estimated total mortality of 91,000 a year. These countries have yet to show the significant negative impact on tuberculosis epidemiology as such changes take considerable time to manifest. Still, there are reports on health systems impact: access to health facilities, destruction of health facilities, health staff casualties, and shortage of medicines. Complex emergencies pose a significant negative impact on tuberculosis in the EMR. This issue should be raised in the global health and political arena. This is a time bomb for tuberculosis. Copyright © 2016.

The impact of thunderstorm asthma on emergency department attendances across London during July 2013.

Science.gov (United States)

Elliot, A J; Hughes, H E; Hughes, T C; Locker, T E; Brown, R; Sarran, C; Clewlow, Y; Murray, V; Bone, A; Catchpole, M; McCloskey, B; Smith, G E

2014-08-01

This study illustrates the potential of using emergency department attendance data, routinely accessed as part of a national syndromic surveillance system, to monitor the impact of thunderstorm asthma. The Emergency Department Syndromic Surveillance System (EDSSS) routinely monitors anonymised attendance data on a daily basis across a sentinel network of 35 emergency departments. Attendance data for asthma, wheeze and difficulty breathing are analysed on a daily basis. A statistically significant spike in asthma attendances in two EDSSS emergency departments in London was detected on 23 July 2013, coinciding with a series of large violent thunderstorms across southern England. There was also an increase in the reported severity of these attendances. This preliminary report illustrates the potential of the EDSSS to monitor the impact of thunderstorms on emergency department asthma attendances. Further work will focus on how this system can be used to quantify the impact on emergency departments, thus potentially improving resource planning and also adding to the thunderstorm asthma evidence-base. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

A value/impact assessment for alternative decay heat removal systems

International Nuclear Information System (INIS)

Cave, L.; Kastenberg, W.E.; Lin, K.Y.

1984-01-01

A Value/Impact assessment for several alternative decay heat removal systems has been carried out using several measures. The assessment is based on an extension of the methodology presented in the Value/Impact Handbook and includes the effects of uncertainty. The assessment was carried out as a function of site population density, existing plant features, and new plant features. Value/Impact measures based on population dose are shown to be sensitive to site, while measures which monetize and aggregate risk are less so. The latter are dominated by on-site costs such as replacement power costs. (orig.)

Visualizing tissue molecular structure of a black type of canola (Brassica) seed with a thick seed coat after heat-related processing in a chemical way.

Science.gov (United States)

Yu, Peiqiang

2013-02-20

Heat-related processing of cereal grains, legume seeds, and oil seeds could be used to improve nutrient availability in ruminants. However, different types of processing may have a different impact on intrinsic structure of tissues. To date, there is little research on structure changes after processing within intact tissues. The synchrotron-based molecular imaging technique enables us to detect inherent structure change on a molecular level. The objective of this study was to visualize tissue of black-type canola (Brassica) seed with a thick seed coat after heat-related processing in a chemical way using the synchrotron imaging technique. The results showed that the chemical images of protein amides were obtained through the imaging technique for the raw, wet, and dry heated black type of canola seed tissues. It seems that different types of processing have a different impact on the protein spectral profile in the black type of canola tissues. Wet heating had a greater impact on the protein α-helix to β-sheet ratio than dry heating. Both dry and wet heating resulted in different patterns in amide I, the second derivative, and FSD spectra. However, the exact differences in the tissue images are relatively difficult to be obtained through visual comparison. Future studies should focus on (1) comparing the response and sensitivity of canola seeds to various processing methods between the yellow-type and black-type of canola seeds; (2) developing a sensitive method to compare the image difference between tissues and between treatments; (3) developing a method to link images to nutrient digestion, and (4) revealing how structure changes affect nutrient absorption in humans and animals.

Heat-Related Illness among Oregon Farmworkers

Directory of Open Access Journals (Sweden)

Jeffrey W. Bethel

2014-09-01

Full Text Available Farmworkers are particularly vulnerable to climate-sensitive health outcomes such as heat-related illness (HRI given their tasks involve heavy exertion in an outdoor setting. The objectives of the study were to: (1 describe symptoms of HRI experienced by farmworkers and (2 explore factors associated with heat knowledge, level of concern regarding HRI, and comfort level taking breaks at work. Bilingual research staff conducted personal interviews of 100 farmworkers during July and August 2013. Data collected included demographics, work history and current work practices, trainings received, HRI symptoms experienced, health status, and health behaviors. Nearly 30% of participants reported experiencing ≥2 HRI symptoms during the previous work. Few participants had high level of heat knowledge (21.0% and 15.6% of participants reported being “very concerned” about the health effects of working in hot conditions. Participants who were paid by the piece were more likely to have a high heat knowledge score and be “very concerned” about HRI but less likely to be “very comfortable” taking a break compared to workers paid by the hour than those who had not received HRI training. Results suggest several areas in which employers and agencies conducting outreach and education to the workers about HRI can change their practices including providing cooling measures and HRI training about risk factors for HRI.

Air pollution and children's asthma-related emergency hospital visits in southeastern France.

Science.gov (United States)

Mazenq, Julie; Dubus, Jean-Christophe; Gaudart, Jean; Charpin, Denis; Nougairede, Antoine; Viudes, Gilles; Noel, Guilhem

2017-06-01

Children's asthma is multifactorial. Environmental factors like air pollution exposure, meteorological conditions, allergens, and viral infections are strongly implicated. However, place of residence has rarely been investigated in connection with these factors. The primary aim of our study was to measure the impact of particulate matter (PM), assessed close to the children's homes, on asthma-related pediatric emergency hospital visits within the Bouches-du-Rhône area in 2013. In a nested case-control study on 3- to 18-year-old children, each control was randomly matched on the emergency room visit day, regardless of hospital. Each asthmatic child was compared to 15 controls. PM 10 and PM 2.5 , meteorological conditions, pollens, and viral data were linked to ZIP code and analyzed by purpose of emergency visit. A total of 68,897 visits were recorded in children, 1182 concerning asthma. Short-term exposure to PM 10 measured near children's homes was associated with excess risk of asthma emergency visits (adjusted odds ratio 1.02 (95% CI 1.01-1.04; p = 0.02)). Male gender, young age, and temperature were other risk factors. Conversely, wind speed was a protective factor. PM 10 and certain meteorological conditions near children's homes increased the risk of emergency asthma-related hospital visits in 3- to 18-year-old children in Bouches-du-Rhône. What is Known: • A relationship between short-term exposure to air pollution and increase in emergency room visits or hospital admissions as a result of increased pollution levels has already been demonstrated. What is New: • This study confirms these results but took into account confounding factors (viral data, pollens, and meteorological conditions) and is based on estimated pollution levels assessed close to the children's homes, rather than those recorded at the hospital. • The study area, the Mediterranean, is favorable to creation of secondary pollutants in these sunny and dry seasons.

Building-related health impacts in European and Chinese cities: a scalable assessment method.

Science.gov (United States)

Tuomisto, Jouni T; Niittynen, Marjo; Pärjälä, Erkki; Asikainen, Arja; Perez, Laura; Trüeb, Stephan; Jantunen, Matti; Künzli, Nino; Sabel, Clive E

2015-12-14

Public health is often affected by societal decisions that are not primarily about health. Climate change mitigation requires intensive actions to minimise greenhouse gas emissions in the future. Many of these actions take place in cities due to their traffic, buildings, and energy consumption. Active climate mitigation policies will also, aside of their long term global impacts, have short term local impacts, both positive and negative, on public health. Our main objective was to develop a generic open impact model to estimate health impacts of emissions due to heat and power consumption of buildings. In addition, the model should be usable for policy comparisons by non-health experts on city level with city-specific data, it should give guidance on the particular climate mitigation questions but at the same time increase understanding on the related health impacts and the model should follow the building stock in time, make comparisons between scenarios, propagate uncertainties, and scale to different levels of detail. We tested The functionalities of the model in two case cities, namely Kuopio and Basel. We estimated the health and climate impacts of two actual policies planned or implemented in the cities. The assessed policies were replacement of peat with wood chips in co-generation of district heat and power, and improved energy efficiency of buildings achieved by renovations. Health impacts were not large in the two cities, but also clear differences in implementation and predictability between the two tested policies were seen. Renovation policies can improve the energy efficiency of buildings and reduce greenhouse gas emissions significantly, but this requires systematic policy sustained for decades. In contrast, fuel changes in large district heating facilities may have rapid and large impacts on emissions. However, the life cycle impacts of different fuels is somewhat an open question. In conclusion, we were able to develop a practical model for city

Impact of cloud radiative heating on East Asian summer monsoon circulation

International Nuclear Information System (INIS)

Guo, Zhun; Zhou, Tianjun; Wang, Minghuai; Qian, Yun

2015-01-01

The impacts of cloud radiative heating on the East Asian Summer Monsoon (EASM) over southeastern China (105°–125°E, 20°–35°N) are addressed by using the Community Atmosphere Model version 5 (CAM5). Sensitivity experiments demonstrate that the radiative heating of clouds leads to a positive effect on the local EASM circulation over southeastern China. Without the radiative heating of clouds, the EASM circulation and precipitation would be much weaker than that in normal conditions. The longwave heating of clouds dominates the changes of EASM circulation. The positive effect of clouds on EASM circulation is explained by the thermodynamic energy equation, i.e. the different heating rate between cloud base and cloud top enhances the convective instability over southeastern China, which consequently enhances updraft. The strong updraft would further result in a southward meridional wind above the center of the updraft through Sverdrup vorticity balance. (letter)

Human mortality impacts of the 2015 summer heat spells in Slovakia

Science.gov (United States)

Výberči, Dalibor; Labudová, Lívia; Eštóková, Milada; Faško, Pavol; Trizna, Milan

2017-07-01

In 2015, Central Europe experienced an unusually warm summer season. For a great majority of climatic stations around Slovakia, it had been the warmest summer ever recorded over their entire instrumental observation period. In this study, we investigate the mortality effects of hot days' sequences during that particular summer on the Slovak population. In consideration of the range of available mortality data, the position of 2015 is analysed within the years 1996-2015. Over the given 20-year period, the summer heat spells of 2015 were by far the most severe from a meteorological point of view, and clearly the deadliest with the total of almost 540 excess deaths. In terms of impacts, an extraordinary 10-day August heat spell was especially remarkable. The massive lethal effects of heat would have likely been even more serious under normal circumstances, since the number of premature deaths appeared to be partially reduced due to a non-standard mortality pattern in the first quarter of the year. The heat spells of the extremely warm summer of 2015 in Slovakia are notable not just for their short-term response in mortality. It appears that in a combination with the preceding strong influenza season, they subsequently affected mortality conditions in the country in the following months up until the end of the year. The impacts described above were rather different for selected population subgroups (men and women, the elderly). Both separately and as a part of the annual mortality cycle, the 2015 summer heat spells may represent a particularly valuable source of information for public health.

Heat-Related Illnesses

Medline Plus

Full Text Available ... To Call 911 Until Help Arrives What To Do In A Medical Emergency Childhood Emergencies Careers in ... cool water, juice or a commercial sports liquid. (Do not give liquids if the person is unconscious.) ...

Soil heating and impact of prescribed burning

Science.gov (United States)

Stoof, Cathelijne

2016-04-01

Prescribed burning is highly uncommon in the Netherlands, where wildfire awareness is increasing but its risk management does not yet include fuel management strategies. A major exception is on two military bases, that need to burn their fields in winter and spring to prevent wildfires during summer shooting practice. Research on these very frequent burns has so far been limited to effects on biodiversity, yet site managers and policy makers have questions regarding the soil temperatures reached during these burns because of potential impact on soil properties and soil dwelling fauna. In March 2015, I therefore measured soil and litter temperatures under heath and grass vegetation during a prescribed burn on military terrain in the Netherlands. Soil and litter moisture were sampled pre- and post-fire, ash was collected, and fireline intensity was estimated from flame length. While standing vegetation was dry (0.13 g water/g biomass for grass and 0.6 g/g for heather), soil and litter were moist (0.21 cm3/cm3 and 1.6 g/g, respectively). Soil heating was therefore very limited, with maximum soil temperature at the soil-litter interface remaining being as low as 6.5 to 11.5°C, and litter temperatures reaching a maximum of 77.5°C at the top of the litter layer. As a result, any changes in physical properties like soil organic matter content and bulk density were not significant. These results are a first step towards a database of soil heating in relation to fuel load and fire intensity in this temperate country, which is not only valuable to increase understanding of the relationships between fire intensity and severity, but also instrumental in the policy debate regarding the sustainability of prescribed burns.

Gender- and sex-specific sports-related injury research in emergency medicine: a consensus on future research direction and focused application.

Science.gov (United States)

Raukar, Neha P; Zonfrillo, Mark R; Kane, Kathleen; Davenport, Moira; Espinoza, Tamara R; Weiland, Jessica; Franco, Vanessa; Vaca, Federico E

2014-12-01

Title IX, the commercialization of sports, the social change in sports participation, and the response to the obesity epidemic have contributed to the rapid proliferation of participation in both competitive organized sports and nontraditional athletic events. As a consequence, emergency physicians are regularly involved in the acute diagnosis, management, disposition, and counseling of a broad range of sports-related pathology. Three important and highly publicized mechanisms of injury in sports relevant to emergency medicine (EM) include concussion, heat illness, and sudden cardiac death. In conjunction with the 2014 Academic Emergency Medicine consensus conference "Gender-specific Research in Emergency Care: Investigate, Understand, and Translate How Gender Affects Patient Outcomes," a consensus group consisting of experts in EM, emergency neurology, sports medicine, and public health convened to deliberate and develop research questions that could ultimately advance the field of sports medicine and allow for meaningful application in the emergency department (ED) clinical setting. Sex differences in injury risk, diagnosis, ED treatment, and counseling are identified in each of these themes. This article presents the consensus-based priority research agenda. © 2014 by the Society for Academic Emergency Medicine.

Spatial patterns of heat-related cardiovascular mortality in the Czech Republic

Czech Academy of Sciences Publication Activity Database

Urban, A.; Burkart, K.; Kyselý, J.; Schuster, Ch.; Plavcová, E.; Hanzlíková, Hana; Štěpánek, P.; Lakes, T.

2016-01-01

Roč. 13, č. 3 (2016), 284/1-284/19 ISSN 1660-4601 Institutional support: RVO:67985530 Keywords : heat stress * mortality * spatial differences Subject RIV: DG - Athmosphere Sciences, Meteorology Impact factor: 2.101, year: 2016

Preliminary experimental insights into differential heat impact among lithic artifacts

Directory of Open Access Journals (Sweden)

Guillermo Bustos-Pérez

2016-09-01

Full Text Available The presence of thermally altered and broken flint artifacts is common at archaeological sites. Most studies focus their attention on the effects of heat treatment on flint to improve knapping qualities, disregarding the effects of fire over flint under uncontrolled conditions. This paper aims to show how under uncontrolled heating processes flint artifacts develop different heat alterations (such as levels of breakage, presence of scales, etc. as a result of vertical distribution, volume or raw material and to establish a gradient of rock changes and behavior. Artifacts where macroscopically analyzed and a series of uncontrolled heating experiments through the distribution of flint blanks under two hearths were carried out, allowing a comparison of the before and after of the blanks. Preliminary results show how levels of breakage, surface alteration or development of heat alteration features can be differentiated according to artifact volume, vertical distribution and level of surface alteration. Results also show how two different raw materials react differently to similar thermal impact, and how surface alteration reacts at different rhythm in the case of recycled artifacts. We conclude that levels of thermal alteration can be differentiated through macroscopic analysis of flint surface.

Attributing anthropogenic impact on regional heat wave events using CAM5 model large ensemble simulations

Science.gov (United States)

Lo, S. H.; Chen, C. T.

2017-12-01

Extreme heat waves have serious impacts on society. It was argued that the anthropogenic forcing might substantially increase the risk of extreme heat wave events (e.g. over western Europe in 2003 and over Russia in 2010). However, the regional dependence of such anthropogenic impact and the sensitivity of the attributed risk to the definition of heat wave still require further studies. In our research framework, the change in the frequency and severity of a heat wave event under current conditions is calculated and compared with the probability and magnitude of the event if the effects of particular external forcing, such as due to human influence, had been absent. In our research, we use the CAM5 large ensemble simulation from the CLIVAR C20C+ Detection and Attribution project (http://portal.nersc.gov/c20c/main.html, Folland et al. 2014) to detect the heat wave events occurred in both historical all forcing run and natural forcing only run. The heat wave events are identified by partial duration series method (Huth et al., 2000). We test the sensitivity of heat wave thresholds from daily maximum temperature (Tmax) in warm season (from May to September) between 1959 and 2013. We consider the anthropogenic effect on the later period (2000-2013) when the warming due to human impact is more evident. Using Taiwan and surrounding area as our preliminary research target, We found the anthropogenic effect will increase the heat wave day per year from 30 days to 75 days and make the mean starting(ending) day for heat waves events about 15-30 days earlier(later). Using the Fraction of Attribution Risk analysis to estimate the risk of frequency of heat wave day, our results show the anthropogenic forcing very likely increase the heat wave days over Taiwan by more than 50%. Further regional differences and sensitivity of the attributed risk to the definition of heat wave will be compared and discussed.

Climate and weather impact timing of emergence of bats.

Directory of Open Access Journals (Sweden)

Winifred F Frick

Full Text Available Interest in forecasting impacts of climate change have heightened attention in recent decades to how animals respond to variation in climate and weather patterns. One difficulty in determining animal response to climate variation is lack of long-term datasets that record animal behaviors over decadal scales. We used radar observations from the national NEXRAD network of Doppler weather radars to measure how group behavior in a colonially-roosting bat species responded to annual variation in climate and daily variation in weather over the past 11 years. Brazilian free-tailed bats (Tadarida brasiliensis form dense aggregations in cave roosts in Texas. These bats emerge from caves daily to forage at high altitudes, which makes them detectable with Doppler weather radars. Timing of emergence in bats is often viewed as an adaptive trade-off between emerging early and risking predation or increased competition and emerging late which restricts foraging opportunities. We used timing of emergence from five maternity colonies of Brazilian free-tailed bats in south-central Texas during the peak lactation period (15 June-15 July to determine whether emergence behavior was associated with summer drought conditions and daily temperatures. Bats emerged significantly earlier during years with extreme drought conditions than during moist years. Bats emerged later on days with high surface temperatures in both dry and moist years, but there was no relationship between surface temperatures and timing of emergence in summers with normal moisture levels. We conclude that emergence behavior is a flexible animal response to climate and weather conditions and may be a useful indicator for monitoring animal response to long-term shifts in climate.

Future Extreme Heat Scenarios to Enable the Assessment of Climate Impacts on Public Health over the Coterminous U.S.

Science.gov (United States)

Quattrochi, Dale A.; Crosson, William L.; Al-Hamdan, Mohammad Z.; Estes, Maurice G., Jr.

2013-01-01

In the United States, extreme heat is the most deadly weather-related hazard. In the face of a warming climate and urbanization, which contributes to local-scale urban heat islands, it is very likely that extreme heat events (EHEs) will become more common and more severe in the U.S. This research seeks to provide historical and future measures of climate-driven extreme heat events to enable assessments of the impacts of heat on public health over the coterminous U.S. We use atmospheric temperature and humidity information from meteorological reanalysis and from Global Climate Models (GCMs) to provide data on past and future heat events. The focus of research is on providing assessments of the magnitude, frequency and geographic distribution of extreme heat in the U.S. to facilitate public health studies. In our approach, long-term climate change is captured with GCM outputs, and the temporal and spatial characteristics of short-term extremes are represented by the reanalysis data. Two future time horizons for 2040 and 2090 are compared to the recent past period of 1981- 2000. We characterize regional-scale temperature and humidity conditions using GCM outputs for two climate change scenarios (A2 and A1B) defined in the Special Report on Emissions Scenarios (SRES). For each future period, 20 years of multi-model GCM outputs are analyzed to develop a 'heat stress climatology' based on statistics of extreme heat indicators. Differences between the two future and the past period are used to define temperature and humidity changes on a monthly time scale and regional spatial scale. These changes are combined with the historical meteorological data, which is hourly and at a spatial scale (12 km), to create future climate realizations. From these realizations, we compute the daily heat stress measures and related spatially-specific climatological fields, such as the mean annual number of days above certain thresholds of maximum and minimum air temperatures, heat indices

German Energiewende and the heating market – Impact and limits of policy

International Nuclear Information System (INIS)

Bauermann, Klaas

2016-01-01

The German Energiewende envisages achieving a climate-neutral building stock in 2050 by means of two major pillars of regulation. First, residential buildings should consume 80% less primary energy and second; the remaining energy demand should be covered primarily with renewables. This paper simulates the future German heating market under different policy scenarios in order to evaluate the impact and limits of recent and conceivable policies. The investigation is based upon a dual model approach, linking a residential heating model to a discrete choice model. The major finding is that current regulations are not suitable for the achievement of governmental targets. Scenario calculations show that additional carbon emission reductions, triggered by the current regulatory regime, are falling short of expectations. In terms of economic efficiency, all calculated policy alternatives outperform the regulation currently in place. This allows to draw the conclusion that carbon emission reductions can be achieved without a major increase in cost. The model results highlight two policy implications. First, a rising mandatory share of renewables in the heating market is needed for target achievement and can be cost effectively. Second, renewable obligations for heating systems must include the existing building stock to achieve the postulated political targets. - Highlights: •The residential heating market accounts for major share of carbon emissions. •The disregard of the building stock weakens the impact of recent regulation. •Current regulation preserves a heating market dominated by fossil fuels. •A significant renewable share can be achieved through direct regulation. •Alternative policy leads to emission reductions without major increases in costs.

Emergency core cooling system for LMFBR type reactors

International Nuclear Information System (INIS)

Tamano, Toyomi; Fukutomi, Shigeki.

1980-01-01

Purpose: To enable elimination of decay heat in an LMFBR type reactor by securing natural cycling force in any state and securing reactor core cooling capacity even when both an external power supply and an emergency power supply are failed in emergency case. Method: Heat insulating material portion for surrounding a descent tube of a steam drum provided at high position for obtaining necessary flow rate for flowing resistance is removed from heat transmitting surface of a recycling type steam generator to provide a heat sink. That is, when both an external power supply and an emergency power supply are failed in emergency, the heat insulator at part of a steam generator recycling loop is removed to produce natural cycling force between it and the heat transmitting portion of the steam generator as a heat source for the heat sink so as to secure the flow rate of the recycling loop. When the power supply is failed in emergency, the heat removing capacity of the steam generator is secured so as to remove the decay heat produced in the reactor core. (Yoshihara, H.)

Analysis of relations for heat transfer at the post-CHF regime

Energy Technology Data Exchange (ETDEWEB)

Dorokhovich, S. L. [Obninsk State Techical Univ., Obninsk (Russian Federation); Kirillov, P. L. [Institute of Physics and Power Engineering, Obninsk (Russian Federation)

2003-07-01

Information about heat transfer rates in two-fluid flow at the post-CHF regime is important for analysis of accidents of water-cooled nuclear reactors as well as calculations of steam generators (liquid metal-water). It is complicate to create analytical methods because there is a variety of two-fluid flow regimes dictated by channel size, pressure, mass flow rate, heat flux, droplet spectrum, flow quality, other factors and, finally, by crisis type. At crisis in subcooled liquid or low quality two-phase flows Inverted Annular Film Boiling (IAFB) takes place when liquid flow is separated from the wall by a thin superheated vapor film. For dispersed flow crisis is usually related to drying a liquid film moving along the heated surface (wall). In both cases two-phase flow is thermodynamically nonequilibrium since the temperatures of phases (liquid and vapor) are different. The mean (at the rate of heat content) flow temperature is not the determining parameter. Different boundary conditions of experiment s uniform heat fluxes or 'hot' spots, are able to lead to different relations for the heat transfer coefficient. Last years the great number of semiempirical models were elaborated, that become more and more complicate. It is difficult to examine many parameters of the models. An agreement between final results and separate experimental data is not yet the evidence for the verity of extension while prerequisites taken in the models are often doubtful and hardly examined. Thus the correlations obtained from experimental data, for example, are used in practice. The analysis of relations for heat transfer at the Deteriorated Heat Transfer (DHT) regime, the comparison of relations with the data of look up tables made on the basis of the Institute of Physics and Power Engineering and Chalk River Laboratories experimental data banks are the objective of current report.

Analysis of relations for heat transfer at the post-CHF regime

International Nuclear Information System (INIS)

Dorokhovich, S. L.; Kirillov, P. L.

2003-01-01

Information about heat transfer rates in two-fluid flow at the post-CHF regime is important for analysis of accidents of water-cooled nuclear reactors as well as calculations of steam generators (liquid metal-water). It is complicate to create analytical methods because there is a variety of two-fluid flow regimes dictated by channel size, pressure, mass flow rate, heat flux, droplet spectrum, flow quality, other factors and, finally, by crisis type. At crisis in subcooled liquid or low quality two-phase flows Inverted Annular Film Boiling (IAFB) takes place when liquid flow is separated from the wall by a thin superheated vapor film. For dispersed flow crisis is usually related to drying a liquid film moving along the heated surface (wall). In both cases two-phase flow is thermodynamically nonequilibrium since the temperatures of phases (liquid and vapor) are different. The mean (at the rate of heat content) flow temperature is not the determining parameter. Different boundary conditions of experiment s uniform heat fluxes or 'hot' spots, are able to lead to different relations for the heat transfer coefficient. Last years the great number of semiempirical models were elaborated, that become more and more complicate. It is difficult to examine many parameters of the models. An agreement between final results and separate experimental data is not yet the evidence for the verity of extension while prerequisites taken in the models are often doubtful and hardly examined. Thus the correlations obtained from experimental data, for example, are used in practice. The analysis of relations for heat transfer at the Deteriorated Heat Transfer (DHT) regime, the comparison of relations with the data of look up tables made on the basis of the Institute of Physics and Power Engineering and Chalk River Laboratories experimental data banks are the objective of current report

Reshaping the Built Environment to Reduce Environmental and Public Health Impacts of Summertime Heat

Science.gov (United States)

Rosenthal, J. E.; Bakewell, K.

2005-12-01

Many American cities are experiencing two types of warming trends in their local climate that due to global environmental change, and that due to local environmental change. Over the next five decades, urban areas within temperate regions may warm disproportionately compared to tropical and subtropical zones according to the IPCC Special Report on The Regional Impacts of Climate Change, and the frequency of very hot days in these climates is expected to approximately double for an increase of 2-3°C in the average summer temperature. As well, due to urbanized land-cover, air temperatures in cities can register 2 to 10 degrees F higher than in surrounding rural areas, resulting in a hotter environment, higher energy demand, and accelerated smog formation due to the urban heat island effect. Our previous research analyzed the temperature differences over time between NY Central Park (NYCP) station and 23 metropolitan regional weather stations classified according to distance and level of urbanization, and showed a heat island effect existing in NYC, with mean temperatures in the NYCP Station generally higher than the surrounding stations, ranging from 1.20 C to 3.02 C. A difference of at least 1 C already existed at the beginning of the 20th century between the mean temperature in NYC and its surrounding rural areas, and this difference increased over the twentieth century. Summertime heat can create heat stress and other health consequences for urban residents. In cities around the world, summer heat can lead to elevated mortality and morbidity rates, especially during extreme events. The epidemiological literature has identified factors in the built environment and demographic characteristics that can increase the risk of heat-related mortality. The elderly and people with pre-existing illnesses are especially vulnerable; also, being bedridden, living alone, and having poor access to public transportation or air-conditioned places. During the Chicago 1995 heat wave

Nutrition in Relation to Diseases and Heat stress in Poultry

Directory of Open Access Journals (Sweden)

S Das

Full Text Available Different diseases conditions and stress factors are responsible for high morbidity and mortality of present day poultry. Nutritional strategy and proper feed formulation with specific dietary regimen can combat this up to a certain extent. The incidence of various infectious diseases, nervous disorders and metabolic disorders can be minimized through proper feed regimen. There is a stiff competition and restrictions in the global market of poultry products which can be addressed with proper management of emerging and important diseases with economic productions and quality poultry products free of elements detrimental to human health. Researchers have made efforts to prevent such damage to poultry and poultry product through dietary manipulations. Heat stress can lead to a reduction in the defense mechanisms of birds or to a relative state of immunosuppression. The health status of the poultry is facing new challenges today which can be suitably addressed by the right scientific and advanced nutritional manoeuvres and make the poultry farming more profitable and presentable in the global market. [Vet. World 2011; 4(9.000: 429-432

Violence toward physicians in emergency departments of Morocco: prevalence, predictive factors, and psychological impact

Directory of Open Access Journals (Sweden)

Zekraoui Aicha

2010-09-01

Full Text Available Abstract Introduction Anyone working in the hospital may become a victim of violence. The effects of violence can range in intensity and include the following: minor physical injuries, serious physical injuries, temporary or permanent physical disability, psychological trauma, and death. The aim of this study was to determine the frequency of exposure, characteristics, and psychological impact of violence toward hospital-based emergency physicians in Morocco. Methods This was a survey including emergency physicians who ensured emergency service during the last fortnight. The variables studied were those related to the victim (age and gender, and those related to aggression: assaulter gender, number, time, reason (delay of consultation and/or care, acute drunkenness, neuropsychiatric disease, and type (verbal abuse, verbal threat and/or physical assault. After the questionnaire was completed, State-Trait Anxiety Inventory (STAI of Spielberg was applied to all participants. Results A total of 60 physicians have achieved permanence in emergency department during the 15 days preceding the questionnaire response. The mean age was 24 ± 1 year and 57% were male. A total of 42 (70% had been exposed to violence. The violence occurred at night n = 16 (27%, afternoon n = 13 (22%, evening n = 7 (12% and morning n = 6 (10%. Reasons for violence were: the delay of consultation or care in n = 31 (52% cases, acute drunkenness in n = 10 (17% cases and neuropsychiatric disease in n = 3 (5% cases. Twenty eight (47% participants stated that they experienced verbal abuse, n = 18 (30% verbal threat and n = 5 (8.3% physical assault. Exposure to some form of violence was related to a higher median [interquartile range, IQR] state anxiety point (SAP; (51 [46-59] vs 39 [34-46]; P P = 0,01. Conclusions This study revealed a high prevalence (70% of violence toward doctors in Morocco emergency departments. The exposure of physicians to some form of violence is greater

Heat Transfer Characteristics of SiC-coated Heat Pipe for Passive Decay Heat Removal

International Nuclear Information System (INIS)

Kim, Kyung Mo; Kim, In Guk; Jeong, Yeong Shin; Bang, In Cheol

2014-01-01

The main concern with the Fukushima accident was the failure of active and passive core cooling systems. The main function of existing passive decay heat removal systems is feeding additional coolant to the reactor core. Thus, an established emergency core cooling system (ECCS) cannot operate properly because of impossible depressurization under the station blackout (SBO) condition. Therefore, a new concept for passive decay heat removal system is required. In this study, an innovative hybrid control rod concept is considered for passive in-core decay heat removal that differs from the existing direct vessel injection core cooling system and passive auxiliary feedwater system (PAFS). The heat transfer between the evaporator and condenser sections occurs by phase change of the working fluid and capillary action induced by wick structures installed on the inner wall of the heat pipe. In this study, a hybrid control rod is developed to take the roles of both neutron absorption and heat removal by combining the functions of a heat pipe and control rod. Previous studies on enhancing the heat removal capacity of heat pipes used nanofluids, self-rewetting fluids, various wick structures and condensers. Many studies have examined the thermal performances of heat pipes using various nanofluids. They concluded that the enhanced thermal performance of the heat pipe using nanofluids is due to nanoparticle deposition on the wick structures. Thus, the wick structure of heat pipes has been modified by nanoparticle deposition to enhance the heat removal capacity. However, previous studies used relatively small heat pipes and narrow ranges of heat loads. The environment of a nuclear reactor is very specific, and the decay heat produced by fission products after shutdown is relatively large. Thus, this study tested a large-scale heat pipe over a wide range of power. The concept of a hybrid heat pipe for an advanced in-core decay heat removal system was introduced for complete

Heat Transfer Characteristics of SiC-coated Heat Pipe for Passive Decay Heat Removal

Energy Technology Data Exchange (ETDEWEB)

Kim, Kyung Mo; Kim, In Guk; Jeong, Yeong Shin; Bang, In Cheol [Ulsan National Institute of Science and Technology, Ulsan (Korea, Republic of)

2014-10-15

The main concern with the Fukushima accident was the failure of active and passive core cooling systems. The main function of existing passive decay heat removal systems is feeding additional coolant to the reactor core. Thus, an established emergency core cooling system (ECCS) cannot operate properly because of impossible depressurization under the station blackout (SBO) condition. Therefore, a new concept for passive decay heat removal system is required. In this study, an innovative hybrid control rod concept is considered for passive in-core decay heat removal that differs from the existing direct vessel injection core cooling system and passive auxiliary feedwater system (PAFS). The heat transfer between the evaporator and condenser sections occurs by phase change of the working fluid and capillary action induced by wick structures installed on the inner wall of the heat pipe. In this study, a hybrid control rod is developed to take the roles of both neutron absorption and heat removal by combining the functions of a heat pipe and control rod. Previous studies on enhancing the heat removal capacity of heat pipes used nanofluids, self-rewetting fluids, various wick structures and condensers. Many studies have examined the thermal performances of heat pipes using various nanofluids. They concluded that the enhanced thermal performance of the heat pipe using nanofluids is due to nanoparticle deposition on the wick structures. Thus, the wick structure of heat pipes has been modified by nanoparticle deposition to enhance the heat removal capacity. However, previous studies used relatively small heat pipes and narrow ranges of heat loads. The environment of a nuclear reactor is very specific, and the decay heat produced by fission products after shutdown is relatively large. Thus, this study tested a large-scale heat pipe over a wide range of power. The concept of a hybrid heat pipe for an advanced in-core decay heat removal system was introduced for complete

Impact of the EURO-2016 football cup on emergency department visits related to alcohol and injury.

Science.gov (United States)

Noel, G N; Roch, A R; Michelet, P M; Boiron, L B; Gentile, S G; Viudes, G V

2018-06-01

In Marseille, the 2016 EURO football cup days were independently associated with a 43% increase in alcohol-related visits in the Emergency Department (ED). Patients admitted for alcohol consumption were younger (41 vs. 46.6; P < 0.001), more often male (82.8% vs. 60.1%; P < 0.001) and more often admitted as inpatients (24.0% vs. 16.5%; P = 0.03) than those admitted for injury. Unlike reported in previous studies, injury-related visits did not increase. This could be explained by coding practice variability between EDs (alcohol or injury). To account for this variability, both diagnosis groups must be separately included when using ED data for preparing and monitoring major gatherings.

The Impact of climate change on heat-related mortality in six major cities, South Korea, under representative concentration pathways (RCPs

Directory of Open Access Journals (Sweden)

Youngmin eKim

2014-02-01

Full Text Available Background: We aimed to quantify the excess mortality associated with increased temperature due to climate change in six major Korean cities under Representative Concentration Pathways (RCPs which are new emission scenarios designed for the fifth assessment report of the Intergovernmental Panel on Climate Change (IPCC. Methods: We first examined the association between daily mean temperature and mortality in each during the summertime (June to September from 2001 to 2008. This was done using a generalized linear Poisson model with adjustment for a long-term time trend, relative humidity, air pollutants, and day of the week. We then computed heat-related mortality attributable to future climate change using estimated mortality risks, projected future populations, and temperature increments for both future years 2041-2070 and 2071-2100 under RCP 4.5 and 8.5. We considered effects from added days with high temperatures over thresholds and shifted effects from high to higher temperature.Results: Estimated excess all-cause mortalities for six cities in Korea ranged from 500 (95% CI: 313-703 for 2041-2070 to 2,320 (95% CI: 1,430-3,281 deaths per year for 2071-2100 under two RCPs. Excess cardiovascular mortality was estimated to range from 192 (95% CI: 41-351 to 896 (95% CI: 185-1,694 deaths per year, covering about 38.5% of all-cause excess mortality. Increased rates of heat-related mortality were higher in cities located at relatively lower latitude than cities with higher latitude. Estimated excess mortality under RCP 8.5, a fossil fuel-intensive emission scenario, was more than twice as high compared with RCP 4.5, low to medium emission scenario.Conclusions: Excess mortality due to climate change is expected to be profound in the future showing spatial variation. Efforts to mitigate climate change can cause substantial health benefits via reducing heat-related mortality.

Effect of Heat Treatment on Microstructure and Impact Toughness of Ti-6Al-4V Manufactured by Selective Laser Melting Process

Directory of Open Access Journals (Sweden)

Lee K.-A.

2017-06-01

Full Text Available This study manufactured Ti-6Al-4V alloy using one of the powder bed fusion 3D-printing processes, selective laser melting, and investigated the effect of heat treatment (650°C/3hrs on microstructure and impact toughness of the material. Initial microstructural observation identified prior-β grain along the building direction before and after heat treatment. In addition, the material formed a fully martensite structure before heat treatment, and after heat treatment, α and β phase were formed simultaneously. Charpy impact tests were conducted. The average impact energy measured as 6.0 J before heat treatment, and after heat treatment, the average impact energy increased by approximately 20% to 7.3 J. Fracture surface observation after the impact test showed that both alloys had brittle characteristics on macro levels, but showed ductile fracture characteristics and dimples at micro levels.

Isotope Fuels Impact Tester (IFIT)

International Nuclear Information System (INIS)

Frantz, C.E.; Taylor, J.W.; Court, D.B.

1975-07-01

The Isotope Fuels Impact Tester (IFIT) is used for safely impacting 238 PuO 2 heat sources that have been heated to 2000 0 C. Impact velocities reach 300 m/s (1000 ft/s). A gas gun with a 178-mm (7-in.) bore is used to accelerate the heat source, which is heated by a furnace built into the projectile. Double containment of the impacted heat source is obtained by two vessels that are sealed directly to the gun muzzle. The impact occurs in the inner vessel, and parts of the projectile jam into and thereby close each vessel. The inner vessel, containing the impacted heat source, is removed from the gun and is placed inside a glovebox for disassembly and heat-source recovery. IFIT's modular structure makes it versatile and adaptable to many types of tests. Many applications have demonstrated its versatility and, more important, its capability for impacting 238 PuO 2 heat sources safely. An approximate theoretical relation is used to predict proper conditions for achieving desired impact velocities. Bore lubricants and projectile-seal design are also important for achieving proper impact velocities

Heat stress related dairy cow mortality during heat waves and control periods in rural Southern Ontario from 2010-2012.

Science.gov (United States)

Bishop-Williams, Katherine E; Berke, Olaf; Pearl, David L; Hand, Karen; Kelton, David F

2015-11-27

Heat stress is a physiological response to extreme environmental heat such as heat waves. Heat stress can result in mortality in dairy cows when extreme heat is both rapidly changing and has a long duration. As a result of climate change, heat waves, which are defined as 3 days of temperatures of 32 °C or above, are an increasingly frequent extreme weather phenomenon in Southern Ontario. Heat waves are increasing the risk for on-farm dairy cow mortality in Southern Ontario. Heat stress indices (HSIs) are generally based on temperature and humidity and provide a relative measure of discomfort which can be used to predict increased risk of on-farm dairy cow mortality. In what follows, the heat stress distribution was described over space and presented with maps. Similarly, on-farm mortality was described and mapped. The goal of this study was to demonstrate that heat waves and related HSI increases during 2010-2012 were associated with increased on-farm dairy cow mortality in Southern Ontario. Mortality records and farm locations for all farms registered in the CanWest Dairy Herd Improvement Program in Southern Ontario were retrieved for 3 heat waves and 6 three-day control periods from 2010 to 2012. A random sample of controls (2:1) was taken from the data set to create a risk-based hybrid design. On-farm heat stress was estimated using data from 37 weather stations and subsequently interpolated across Southern Ontario by geostatistical kriging. A Poisson regression model was applied to assess the on-farm mortality in relation to varying levels of the HSI. For every one unit increase in HSI the on-farm mortality rate across Southern Ontario increases by 1.03 times (CI95% (IRR) = (1.025,1.035); p = ≤ 0.001). With a typical 8.6 unit increase in HSI from a control period to a heat wave, mortality rates are predicted to increase by 1.27 times. Southern Ontario was affected by heat waves, as demonstrated by high levels of heat stress and increased on-farm mortality

Impacts of updated green vegetation fraction data on WRF simulations of the 2006 European heat wave

Science.gov (United States)

Refslund, J.; Dellwik, E.; Hahmann, A. N.; Barlage, M. J.; Boegh, E.

2012-12-01

Climate change studies suggest an increase in heat wave occurrences over Europe in the coming decades. Extreme events with excessive heat and associated drought will impact vegetation growth and health and lead to alterations in the partitioning of the surface energy. In this study, the atmospheric conditions during the heat wave year 2006 over Europe were simulated using the Weather Research and Forecasting (WRF) model. To account for the drought effects on the vegetation, new high-resolution green vegetation fraction (GVF) data were developed for the domain using NDVI data from MODIS satellite observations. Many empirical relationships exist to convert NDVI to GVF and both a linear and a quadratic formulation were evaluated. The new GVF product has a spatial resolution of 1 km2 and a temporal resolution of 8 days. To minimize impacts from low-quality satellite retrievals in the NDVI series, as well as for comparison with the default GVF climatology in WRF, a new background climatology using 10 recent years of observations was also developed. The annual time series of the new GVF climatology was compared to the default WRF GVF climatology at 18 km2 grid resolution for the most common land use classes in the European domain. The new climatology generally has higher GVF levels throughout the year, in particular an extended autumnal growth season. Comparison of 2006 GVF with the climatology clearly indicates vegetation stresses related to heat and drought. The GVF product based on a quadratic NDVI relationship shows the best agreement with the magnitude and annual range of the default input data, in addition to including updated seasonality for various land use classes. The new GVF products were tested in WRF and found to work well for the spring of 2006 where the difference between the default and new GVF products was small. The WRF 2006 heat wave simulations were verified by comparison with daily gridded observations of mean, minimum and maximum temperature and

Comparing electricity, heat and biogas storages’ impacts on renewable energy integration

DEFF Research Database (Denmark)

Østergaard, Poul Alberg

2012-01-01

-inclusive 100% renewable energy scenario developed for the Danish city Aalborg based on wind power, bio-resources and low-temperature geothermal heat. The article investigates the system impact of different types of energy storage systems including district heating storage, biogas storage and electricity......Increasing penetration of fluctuating energy sources for electricity generation, heating, cooling and transportation increase the need for flexibility of the energy system to accommodate the fluctuations of these energy sources. Controlling production, controlling demand and utilising storage...... options are the three general categories of measures that may be applied for ensuring balance between production and demand, however with fluctuating energy sources, options are limited, and flexible demand has also demonstrated limited perspective. This article takes its point of departure in an all...

The Conundrum of Impacts of Climate Change on Urbanization and the Urban Heat Island Effect

Science.gov (United States)

Quattrochi, Dale A.

2011-01-01

The twenty-first century is the first urban century according to the United Nations Development Program. The focus on cities reflects awareness of the growing percentage of the world's population that lives in urban areas. In 2000, approximately 3 billion people representing about 40% of the global population resided in urban areas. The United Nations estimates that by 2025, 60% of the world s population will live in urban areas. As a consequence, the number of megacities (those cities with populations of 10 million inhabitants or more) will increase by 100 by 2025. Thus, there is a critical need to understand the spatial growth of urban areas and what the impacts are on the environment. Moreover, there is a critical need to assess how under global climate change, cities will affect the local, regional, and even global climate. As urban areas increase in size, it is anticipated there will be a concomitant growth of the Urban Heat Island effect (UHI), and the attributes that are related to its spatial and temporal dynamics. Therefore, how climate change, including the dynamics of the UHI, will affect the urban environment, must be explored to help mitigate potential impacts on the environment (e.g., air quality, heat stress, vectorborne disease) and on human health and well being, to develop adaptation schemes to cope with these impacts.

FEMALE FARMWORKERS’ PERCEPTIONS OF HEAT-RELATED ILLNESS AND PREGNANCY HEALTH

OpenAIRE

Flocks, Joan; Mac, Valerie Vi Thien; Runkle, Jennifer; Tovar-Aguilar, Jose Antonio; Economos, Jeannie; McCauley, Linda A.

2013-01-01

While agricultural workers have elevated risks of heat-related illnesses (HRI), pregnant farmworkers exposed to extreme heat face additional health risk, including poor pregnancy health and birth outcomes. Qualitative data from five focus groups with 35 female Hispanic and Haitian nursery and fernery workers provide details about the women’s perceptions of HRI and pregnancy. Participants believe that heat exposure can adversely affect general, pregnancy, and fetal health, yet feel they lack c...

The urban heat island and its impact on heat waves and human health in Shanghai.

Science.gov (United States)

Tan, Jianguo; Zheng, Youfei; Tang, Xu; Guo, Changyi; Li, Liping; Song, Guixiang; Zhen, Xinrong; Yuan, Dong; Kalkstein, Adam J; Li, Furong

2010-01-01

With global warming forecast to continue into the foreseeable future, heat waves are very likely to increase in both frequency and intensity. In urban regions, these future heat waves will be exacerbated by the urban heat island effect, and will have the potential to negatively influence the health and welfare of urban residents. In order to investigate the health effects of the urban heat island (UHI) in Shanghai, China, 30 years of meteorological records (1975-2004) were examined for 11 first- and second-order weather stations in and around Shanghai. Additionally, automatic weather observation data recorded in recent years as well as daily all-cause summer mortality counts in 11 urban, suburban, and exurban regions (1998-2004) in Shanghai have been used. The results show that different sites (city center or surroundings) have experienced different degrees of warming as a result of increasing urbanization. In turn, this has resulted in a more extensive urban heat island effect, causing additional hot days and heat waves in urban regions compared to rural locales. An examination of summer mortality rates in and around Shanghai yields heightened heat-related mortality in urban regions, and we conclude that the UHI is directly responsible, acting to worsen the adverse health effects from exposure to extreme thermal conditions.

Modelling domestic stock energy use and heat-related health risk : a GIS-based bottom-up modelling approach

Energy Technology Data Exchange (ETDEWEB)

Mavrogianni, A.; Davies, M. [Univ. College London, London (United Kingdom). Bartlett School of Graduate Studies; Chalabi, Z.; Wilkinson, P. [London School of Hygiene and Tropical Medecine, London (United Kingdom); Kolokotroni, M. [Brunel Univ., London (United Kingdom). School of Engineering Design

2009-07-01

Approximately 8 per cent of the carbon dioxide (CO{sub 2}) emissions produced in the United Kingdom are produced in London, one of the fastest growing cities worldwide. Based on the projected rates of population and economic growth, a 15 per cent increase of emissions is predicted. In addition to the national target to cut emissions by 80 per cent by 2050, the Mayor of London Climate Change Action Plan set a target to reduce London's CO{sub 2} emissions by 60 per cent by 2025. Significant carbon savings can be achieved in the building sector, particularly since 38 per cent of the total delivered energy in London is associated with domestic energy use. This paper demonstrated a systematic approach towards exploring the impact of urban built form and the combined effect of climate change and the urban heat island (UHI) phenomenon on the levels of domestic energy consumption and heat-related health risk in London. It presented work in progress on the development of a GIS-based energy consumption model and heat vulnerability index of the Greater London Area domestic stock. Comparison of the model output for 10 case study areas with topdown energy statistics revealed that the model successfully ranks areas based on their domestic space heating demand. The health module can be used to determine environments prone to higher risk of heat stress by investigating urban texture factors. A newly developed epidemiological model will be feed into the health module to examine the influence on risk of heat-related mortality of local urban built form characteristics. The epidemiological model is based on multi-variable analysis of deaths during heat wave and non-heat wave days. 29 refs., 1 tab., 7 figs.

Urban Heat Islands and Their Mitigation vs. Local Impacts of Climate Change

Science.gov (United States)

Taha, H.

2007-12-01

Urban heat islands and their mitigation take on added significance, both negative and positive, when viewed from a climate-change perspective. In negative terms, urban heat islands can act as local exacerbating factors, or magnifying lenses, to the effects of regional and large-scale climate perturbations and change. They can locally impact meteorology, energy/electricity generation and use, thermal environment (comfort and heat waves), emissions of air pollutants, photochemistry, and air quality. In positive terms, on the other hand, mitigation of urban heat islands (via urban surface modifications and control of man-made heat, for example) can potentially have a beneficial effect of mitigating the local negative impacts of climate change. In addition, mitigation of urban heat islands can, in itself, contribute to preventing regional and global climate change, even if modestly, by helping reduce CO2 emissions from power plants and other sources as a result of decreased energy use for cooling (both direct and indirect) and reducing the rates of meteorology-dependent emissions of air pollutants. This presentation will highlight aspects and characteristics of heat islands, their mitigation, their modeling and quantification techniques, and recent advances in meso-urban modeling of California (funded by the California Energy Commission). In particular, the presentation will focus on results from quantitative, modeling-based analyses of the potential benefits of heat island mitigation in 1) reducing point- and area-source emissions of CO2, NOx, and VOC as a result of reduced cooling energy demand and ambient/surface temperatures, 2) reducing evaporative and fugitive hydrocarbon emissions as a result of lowered temperatures, 3) reducing biogenic hydrocarbon emissions from existing vegetative cover, 4) slowing the rates of tropospheric/ground-level ozone formation and/or accumulation in the urban boundary layer, and 5) helping improve air quality. Quantitative estimates

Heat or Cold: Which One Exerts Greater Deleterious Effects on Health in a Basin Climate City? Impact of Ambient Temperature on Mortality in Chengdu, China.

Science.gov (United States)

Cui, Yan; Yin, Fei; Deng, Ying; Volinn, Ernest; Chen, Fei; Ji, Kui; Zeng, Jing; Zhao, Xing; Li, Xiaosong

2016-12-10

Background : Although studies from many countries have estimated the impact of ambient temperature on mortality, few have compared the relative impacts of heat and cold on health, especially in basin climate cities. We aimed to quantify the impact of ambient temperature on mortality, and to compare the contributions of heat and cold in a large basin climate city, i.e., Chengdu (Sichuan Province, China); Methods : We estimated the temperature-mortality association with a distributed lag non-linear model (DLNM) with a maximum lag-time of 21 days while controlling for long time trends and day of week. We calculated the mortality risk attributable to heat and cold, which were defined as temperatures above and below an "optimum temperature" that corresponded to the point of minimum mortality. In addition, we explored effects of individual characteristics; Results : The analysis provides estimates of the overall mortality burden attributable to temperature, and then computes the components attributable to heat and cold. Overall, the total fraction of deaths caused by both heat and cold was 10.93% (95%CI: 7.99%-13.65%). Taken separately, cold was responsible for most of the burden (estimate 9.96%, 95%CI: 6.90%-12.81%), while the fraction attributable to heat was relatively small (estimate 0.97%, 95%CI: 0.46%-2.35%). The attributable risk (AR) of respiratory diseases was higher (19.69%, 95%CI: 14.45%-24.24%) than that of cardiovascular diseases (11.40%, 95%CI: 6.29%-16.01%); Conclusions : In Chengdu, temperature was responsible for a substantial fraction of deaths, with cold responsible for a higher proportion of deaths than heat. Respiratory diseases exert a larger effect on death than other diseases especially on cold days. There is potential to reduce respiratory-associated mortality especially among the aged population in basin climate cities when the temperature deviates beneath the optimum. The result may help to comprehensively assess the impact of ambient

Heat-Related Hospitalizations in Older Adults: An Amplified Effect of the First Seasonal Heatwave

Science.gov (United States)

Liss, Alexander; Wu, Ruiruo; Chui, Kenneth Kwan Ho; Naumova, Elena N.

2017-01-01

Older adults are highly vulnerable to the detriment of extreme weather. The rapid non-linear increase in heat-related morbidity is difficult to quantify, hindering the attribution of direct effects of exposure on severe health outcomes. We examine the effects of ambient temperatures on heat-related hospitalizations (HH) among the elderly in presence of strong seasonality and by assessing the effects caused by the first and subsequent seasonal heatwaves. We empirically derived the thresholds for a heatwave episode in Boston MSA based on 16 years of daily observations. We compared the health risks of heatwaves using the proposed and four alternative definitions. 701 cases of HH in older residents of Boston area were examined using harmonic regression models, designed to capture the non-linear effects of ambient temperatures and heatwave episodes when the night-time temperature is above 65.5 °F for 3 consecutive nights. The overall relative risk of HH associated with a heatwave episode was 6.9 [95%CI:4.8-9.8]. The relative risk of HH associated with the first heatwave increases up to 13.3 [95%CI:7.4-24.0]. The risk declined to 3.7 [95%CI:2.4-5.8] for the subsequent heatwave. Four other commonly used heatwave definitions confirmed these findings. Public health actions have to target the first heatwave to maximize the impact of preventive measures.

Event-related potential correlates of emergent inference in human arbitrary relational learning.

Science.gov (United States)

Wang, Ting; Dymond, Simon

2013-01-01

Two experiments investigated the functional-anatomical correlates of cognition supporting untrained, emergent relational inference in a stimulus equivalence task. In Experiment 1, after learning a series of conditional relations involving words and pseudowords, participants performed a relatedness task during which EEG was recorded. Behavioural performance was faster and more accurate on untrained, indirectly related symmetry (i.e., learn AB and infer BA) and equivalence trials (i.e., learn AB and AC and infer CB) than on unrelated trials, regardless of whether or not a formal test for stimulus equivalence relations had been conducted. Consistent with previous results, event related potentials (ERPs) evoked by trained and emergent trials at parietal and occipital sites differed only for those participants who had not received a prior equivalence test. Experiment 2 further replicated and extended these behavioural and ERP findings using arbitrary symbols as stimuli and demonstrated time and frequency differences for trained and untrained relatedness trials. Overall, the findings demonstrate convincingly the ERP correlates of intra-experimentally established stimulus equivalence relations consisting entirely of arbitrary symbols and offer support for a contemporary cognitive-behavioural model of symbolic categorisation and relational inference. Copyright © 2012 Elsevier B.V. All rights reserved.

Complex emergencies in the Eastern Mediterranean Region: Impact on tuberculosis control

Directory of Open Access Journals (Sweden)

Akihiro Seita

2016-01-01

Conclusion: Complex emergencies pose a significant negative impact on tuberculosis in the EMR. This issue should be raised in the global health and political arena. This is a time bomb for tuberculosis.

Cooling and Heating Season Impacts of Right-Sizing of Fixed- and Variable-Capacity Heat Pumps With Attic and Indoor Ductwork

Energy Technology Data Exchange (ETDEWEB)

Cummings, James [Building America Partnership for Improved Residential Construction, Cocoa, FL (United States); Withers, Charles [Building America Partnership for Improved Residential Construction, Cocoa, FL (United States); Kono, Jamie [Building America Partnership for Improved Residential Construction, Cocoa, FL (United States)

2015-06-01

A new generation of central, ducted variable-capacity heat pump systems has come on the market, promising very high cooling and heating efficiency. They are controlled differently than standard fixed-capacity systems. Instead of cycling on at full capacity and then cycling off when the thermostat is satisfied, they vary their cooling and heating output over a wide range (approximately 40% - 118% of nominal full capacity), thus staying 'on' for 60% - 100% more hours per day compared to fixed -capacity systems. Experiments in this research examined the performance of 2-ton and 3-ton fixed- and variable-capacity systems and the impacts of system oversizing.

Transfusion Related Emergencies

OpenAIRE

Osborn, Megan Boysen; Tran, Min-Ha

2016-01-01

Audience: This exercise is appropriate for all emergency medicine learners (residents and medical students) and learners from other specialties (internal medicine, family medicine, anesthesia). Introduction: About 85 million red blood cell units are transfused worldwide each year. Transfusion reactions can complicate up to 8% of blood transfusions and can range from benign to life threatening. An emergency physician must be able to discuss the risks and benefits of blood transfusion...

Emergency endoscopic needle-knife precut papillotomy in acute severe cholangitis resulting from impacted common bile duct stones at duodenal papilla.

Science.gov (United States)

Zheng, Mingwei; Liu, Xufeng; Li, Ning; Li, Wei-Zhi

2018-03-01

To evaluate the efficacy and safety of emergency endoscopic needle-knife precut papillotomy in acute severe cholangitis resulting from impacted common bile duct stones at duodenal papilla. Between January 2010 and January 2015, 118 cases of acute severe cholangitis with impacted common bile duct stones at the native papilla underwent emergency endoscopic retrograde cholangiopancreatography (ERCP) and early needle-knife precut papillotomy in a tertiary referral center. Precut techniques were performed according to the different locations of stones in the duodenal papilla. Clinical data about therapy and recovery of the 118 patients were recorded and analyzed. One hundred and eighteen patients underwent emergency ERCP within 24 h after hospitalization, with a total success rate of 100%. The mean operating time was 6.4 ± 4.1 min. Postoperative acute physiology and chronic health evaluation (APACHE) II scores, white blood cell count and liver function improved significantly. The complication rate was 4.2% (5/118); two with hemorrhage and three with acute pancreatitis. There was no procedure-related mortality. Emergency endoscopic needle-knife precut papillotomy is effective and safe for acute severe cholangitis resulting from impacted common bile duct stones at the duodenal papilla. Copyright © 2017 Editrice Gastroenterologica Italiana S.r.l. Published by Elsevier Ltd. All rights reserved.

Insect emergence in relation to floods in wet meadows and swamps in the River Dalälven floodplain.

Science.gov (United States)

Vinnersten, T Z Persson; Östman, Ö; Schäfer, M L; Lundström, J O

2014-08-01

Annual variation in flood frequency and hydroperiod during the vegetation season has ecological impacts on the floodplain biota. Although many insect groups may have a lower emergence during a flood event, it is poorly known how annual emergence of insects in temporary wetlands is related to the variation in hydrology. Between May and September, we studied the weekly emergence of 18 insect taxa over six consecutive years, 2002-2007, in six temporary flooded wetlands (four wet meadows and two forest swamps) in the River Dalälven floodplains, Central Sweden. We used emergence traps to collect emerging insects from terrestrial and aquatic parts of wet meadows and swamp forests. In all wetlands, the insect fauna was numerically dominated by the orders Diptera, Hymenoptera, Coleoptera and Homoptera. On a weekly basis, 9 out of the 18 insect taxa had lower emergence in weeks with flood than in weeks with no flood, whereas no taxon had a higher emergence in weeks with flood. Over the seasons, we related insect emergence to seasonal flood frequency and length of hydroperiod. The emergence of most studied taxa decreased with increasing hydroperiod, which suggests that emergence after floods do not compensate for the reduced emergence during floods. Only Culicidae and the aquatic Chironomidae sub-families Tanypodinae and Chironominae showed an increase in emergence with increasing hydroperiod, whereas Staphylinidae peaked at intermediate hydroperiod. We conclude that a hydroperiod covering up to 40% of the vegetation season has a significant negative effect on the emergence of most taxa and that only a few taxa occurring in the temporary wetlands are actually favoured by a flood regime with recurrent and unpredictable floods.

Impacts of climate change on heat-related mortality risk across the Middle East and North Africa (MENA)

Science.gov (United States)

Moradkhani, H.; Ahmadalipour, A.

2017-12-01

It has been reported that even if the global mean temperature increase is limited to 2°C, warming over land will be far beyond that in many regions. Global climate change will increase the frequency and intensity of heatwaves and extreme high temperatures, which will in turn have severe impacts on human life. In this study, the mortality risk caused by excessive heat stress is investigated. Daily maximum air temperature and relative humidity are acquired from 17 CMIP5 Regional Climate Models (RCMs) developed by CORDEX at 0.44 degree spatial resolution. Then, the daily wet-bulb temperature is calculated and a recently developed health risk model is implemented to quantify the mortality risk. The study is applied over the latitudes 6.6°S-42°N and longitudes 20°W-60°E covering parts of 70 countries and accommodating over 600 million inhabitants. The analysis is performed for the historical period of 1951-2005 as well as two future scenarios of RCP4.5 (moderate) and RCP8.5 (business as usual) during 2006-2100. Results indicate about 5 to 30 times higher mortality risk in distant future compared to the historical period. The most aggravation of mortality risk over land is found at the southwestern regions of MENA, due to substantial increase in frequency and intensity of extreme temperatures. Mortality risk is found to be much higher over open waters and coastal regions due to abundant humidity, especially in the coastal regions of the Red sea and Persian Gulf.

Preventing Heat-Related Illness or Death of Outdoor Workers

Science.gov (United States)

... instructed him to rest, but the man continued working. An hour later, the man appeared confused and coworkers carried ... for conducting research and making recommendations to prevent work-related illness and ... significantly reduced Preventing Heat-related Illness or Death of Outdoor ...

Component Cooling Heat Exchanger Heat Transfer Capability Operability Monitoring

International Nuclear Information System (INIS)

Mihalina, M.; Djetelic, N.

2010-01-01

The ultimate heat sink (UHS) is of highest importance for nuclear power plant safe and reliable operation. The most important component in line from safety-related heat sources to the ultimate heat sink water body is a component cooling heat exchanger (CC Heat Exchanger). The Component Cooling Heat Exchanger has a safety-related function to transfer the heat from the Component Cooling (CC) water system to the Service Water (SW) system. SW systems throughout the world have been the root of many plant problems because the water source, usually river, lake, sea or cooling pond, are conductive to corrosion, erosion, biofouling, debris intrusion, silt, sediment deposits, etc. At Krsko NPP, these problems usually cumulate in the summer period from July to August, with higher Sava River (service water system) temperatures. Therefore it was necessary to continuously evaluate the CC Heat Exchanger operation and confirm that the system would perform its intended function in accordance with the plant's design basis, given as a minimum heat transfer rate in the heat exchanger design specification sheet. The Essential Service Water system at Krsko NPP is an open cycle cooling system which transfers heat from safety and non-safety-related systems and components to the ultimate heat sink the Sava River. The system is continuously in operation in all modes of plant operation, including plant shutdown and refueling. However, due to the Sava River impurities and our limited abilities of the water treatment, the system is subject to fouling, sedimentation buildup, corrosion and scale formation, which could negatively impact its performance being unable to satisfy its safety related post accident heat removal function. Low temperature difference and high fluid flows make it difficult to evaluate the CC Heat Exchanger due to its specific design. The important effects noted are measurement uncertainties, nonspecific construction, high heat transfer capacity, and operational specifics (e

Differences in Heat-Related Mortality by Citizenship Status: United States, 2005-2014.

Science.gov (United States)

Taylor, Ethel V; Vaidyanathan, Ambarish; Flanders, W Dana; Murphy, Matthew; Spencer, Merianne; Noe, Rebecca S

2018-04-01

To determine whether non-US citizens have a higher mortality risk of heat-related deaths than do US citizens. We used place of residence reported in mortality data from the National Vital Statistics System from 2005 to 2014 as a proxy for citizenship to examine differences in heat-related deaths between non-US and US citizens. Estimates from the US Census Bureau American Community Survey of self-reported citizenship status and place of birth provided the numbers for the study population. We calculated the standardized mortality ratio and relative risk for heat-related deaths between non-US and US citizens nationally. Heat-related deaths accounted for 2.23% (n = 999) of deaths among non-US citizens and 0.02% (n = 4196) of deaths among US citizens. The age-adjusted standardized mortality ratio for non-US citizens compared with US citizens was 3.4 (95% confidence ratio [CI] = 3.2, 3.6). This risk was higher for Hispanic non-US citizens (risk ratio [RR] = 3.6; 95% CI = 3.2, 3.9) and non-US citizens aged 18 to 24 years (RR = 20.6; 95% CI = 16.5, 25.7). We found an increased mortality risk among non-US citizens compared with US citizens for heat-related deaths, especially those younger and of Hispanic ethnicity.

Using risk analysis in Health Impact Assessment: the impact of different relative risks for men and women in different socio-economic groups

DEFF Research Database (Denmark)

Nilunger, Louise; Diderichsen, Finn; Burström, Bo

2004-01-01

The aim of this study is to contribute to the emerging field of quantification of Health Impact Assessment (HIA), by analysing how different relative risks affect the burden of disease for various socio-economic groups (SES). Risk analysis, utilising attributable and impact fraction, raises several...... methodological considerations. The present study illustrates this by measuring the impact of changed distribution levels of smoking on lung cancer, ischemic heart disease (IHD), chronic obstructive lung disorder (COLD) and stroke for the highest and lowest socio-economic groups measured in disability adjusted...... the highest and lowest socio-economic groups may decrease by 75% or increase by 21% depending on the size of the relative risk. Assuming the same smoking prevalence for the lowest socio-economic group as for the highest (impact fraction), then the inequality may decrease by 7-26%. Consequently, the size...

The Impact of Sovereign Credit Rating Changes on Emerging Stock Markets

OpenAIRE

YIN, WEIGUO

2008-01-01

This study investigate the impact of sovereign rating change in emerging markets by using 42 sample counties over the period Jan. 1999 to Aug. 2008. The concurrent relationship between sovereign rating changes and the associated stock market spread can be established: the spreads tend to rise (fall) when upgrades (downgrades) occur. Surprisingly, according to Fitch report regarding the emerging market liquidity, we divide the whole time line into two sub-periods. It is found that rating chang...

Hospital-related incidents; causes and its impact on disaster preparedness and prehospital organisations

Directory of Open Access Journals (Sweden)

Khorram-Manesh Amir

2009-06-01

Full Text Available Abstract Background A hospital's capacity and preparedness is one of the important parts of disaster planning. Hospital-related incidents, a new phenomenon in Swedish healthcare, may lead to ambulance diversions, increased waiting time at emergency departments and treatment delay along with deterioration of disaster management and surge capacity. We aimed to identify the causes and impacts of hospital-related incidents in Region Västra Götaland (western region of Sweden. Methods The regional registry at the Prehospital and Disaster Medicine Center was reviewed (2006–2008. The number of hospital-related incidents and its causes were analyzed. Results There were an increasing number of hospital-related incidents mainly caused by emergency department's overcrowdings, the lack of beds at ordinary wards and/or intensive care units and technical problems at the radiology departments. These incidents resulted in ambulance diversions and reduced the prehospital capacity as well as endangering the patient safety. Conclusion Besides emergency department overcrowdings, ambulance diversions, endangering patient s safety and increasing risk for in-hospital mortality, hospital-related incidents reduces and limits the regional preparedness by minimizing the surge capacity. In order to prevent a future irreversible disaster, this problem should be avoided and addressed properly by further regional studies.

Droplet Impact on a Heated Surface under a Depressurized Environment

Science.gov (United States)

Hatakenaka, Ryuta; Tagawa, Yoshiyuki

2016-11-01

Behavior of a water droplet of the diameter 1-3mm impacting on a heated surface under depressurized environment (100kPa -1kPa) has been studied. A syringe pump for droplet generation and a heated plate are set into a transparent acrylic vacuum chamber. The internal pressure of the chamber is automatically controlled at a target pressure with a rotary pump, a pressure transducer, and an electrical valve. A silicon wafer of the thickness 0.28 mm is mounted on the heater plate, whose temperature is directly measured by attaching a thermocouple on the backside. The droplet behavior is captured using a high-speed camera in a direction perpendicular to droplet velocity. Some unique behaviors of droplet are observed by decreasing the environmental pressure, which are considered to be due to two basic elements: Enhancement of evaporation due to the lowered saturation temperature, and shortage of pneumatic spring effect between the droplet and heated wall due to the lowered pressure of the air.

Effect of the relative time of emergence on the growth allometry of Galium aparine in competition with Triticum aestivum

Czech Academy of Sciences Publication Activity Database

Klem, Karel; Rajsnerová, Petra; Novotná, Kateřina; Urban, Otmar; Marek, Michal V.

2014-01-01

Roč. 14, č. 4 (2014), s. 262-270 ISSN 1444-6162 R&D Projects: GA MZe QI111A133; GA TA ČR TA02010780 Institutional support: RVO:67179843 Keywords : cleaver * competition * growth allometry * relative time of emergence * wheat Subject RIV: GC - Agronomy Impact factor: 0.537, year: 2014

Impact of heat stress during seed development on soybean seed metabolome

Science.gov (United States)

Seed development is a temperature-sensitive process that is much more vulnerable than vegetative tissues to abiotic stresses. Climate change is expected to increase the incidence and severity of summer heatwaves, and the impact of heat stress on seed development is expected to become more widespread...

Heat-related mortality in India: excess all-cause mortality associated with the 2010 Ahmedabad heat wave.

Directory of Open Access Journals (Sweden)

Gulrez Shah Azhar

Full Text Available In the recent past, spells of extreme heat associated with appreciable mortality have been documented in developed countries, including North America and Europe. However, far fewer research reports are available from developing countries or specific cities in South Asia. In May 2010, Ahmedabad, India, faced a heat wave where the temperatures reached a high of 46.8 °C with an apparent increase in mortality. The purpose of this study is to characterize the heat wave impact and assess the associated excess mortality.We conducted an analysis of all-cause mortality associated with a May 2010 heat wave in Ahmedabad, Gujarat, India, to determine whether extreme heat leads to excess mortality. Counts of all-cause deaths from May 1-31, 2010 were compared with the mean of counts from temporally matched periods in May 2009 and 2011 to calculate excess mortality. Other analyses included a 7-day moving average, mortality rate ratio analysis, and relationship between daily maximum temperature and daily all-cause death counts over the entire year of 2010, using month-wise correlations.The May 2010 heat wave was associated with significant excess all-cause mortality. 4,462 all-cause deaths occurred, comprising an excess of 1,344 all-cause deaths, an estimated 43.1% increase when compared to the reference period (3,118 deaths. In monthly pair-wise comparisons for 2010, we found high correlations between mortality and daily maximum temperature during the locally hottest "summer" months of April (r = 0.69, p<0.001, May (r = 0.77, p<0.001, and June (r = 0.39, p<0.05. During a period of more intense heat (May 19-25, 2010, mortality rate ratios were 1.76 [95% CI 1.67-1.83, p<0.001] and 2.12 [95% CI 2.03-2.21] applying reference periods (May 12-18, 2010 from various years.The May 2010 heat wave in Ahmedabad, Gujarat, India had a substantial effect on all-cause excess mortality, even in this city where hot temperatures prevail through much of April-June.

Urbanization Level and Vulnerability to Heat-Related Mortality in Jiangsu Province, China.

Science.gov (United States)

Chen, Kai; Zhou, Lian; Chen, Xiaodong; Ma, Zongwei; Liu, Yang; Huang, Lei; Bi, Jun; Kinney, Patrick L

2016-12-01

Although adverse effects of high temperature on mortality have been studied extensively in urban areas, little is known of the heat-mortality associations outside of cities. We investigated whether heat-mortality associations differed between urban and nonurban areas and how urbanicity affected the vulnerability to heat-related mortality. We first analyzed heat-related mortality risk in each of 102 counties in Jiangsu Province, China, during 2009-2013 using a distributed-lag nonlinear model. The county-specific estimates were then pooled for more urban (percentage of urban population ≥ 57.11%) and less urban (percentage of urban population risk comparing the 99th vs. 75th percentiles of temperature was 1.43 [95% posterior intervals (PI): 1.36, 1.50] in less urban counties and 1.26 (95% PI: 1.23, 1.30) in more urban counties. The heat effects on cardiorespiratory mortality followed a similar pattern. Higher education level and prevalence of air conditioning were significantly associated with counties having lower risks, whereas percentage of elderly people was significantly associated with increased risks. Our findings reveal that nonurban areas have significant heat-related mortality risks in Jiangsu, China. These results suggest the need for enhanced adaptation planning in Chinese nonurban areas under a changing climate. Citation: Chen K, Zhou L, Chen X, Ma Z, Liu Y, Huang L, Bi J, Kinney PL. 2016. Urbanization level and vulnerability to heat-related mortality in Jiangsu Province, China. Environ Health Perspect 124:1863-1869; http://dx.doi.org/10.1289/EHP204.

Real-time appraisal of the spatially distributed heat related health risk and energy demand of cities

Science.gov (United States)

Keramitsoglou, Iphigenia; Kiranoudis, Chris T.; Sismanidis, Panagiotis

2016-08-01

The Urban Heat Island (UHI) is an adverse environmental effect of urbanization that increases the energy demand of cities, impacts the human health, and intensifies and prolongs heatwave events. To facilitate the study of UHIs the Institute for Astronomy, Astrophysics, Space Applications and Remote Sensing of the National Observatory of Athens (IAASARS/NOA) has developed an operational real-time system that exploits remote sensing image data from Meteosat Second Generation - Spinning Enhanced Visible and Infrared Imager (MSG-SEVIRI) and generates high spatiotemporal land surface temperature (LST) and 2 m air temperature (TA) time series. These datasets form the basis for the generation of higher value products and services related to energy demand and heat-related health issues. These products are the heatwave hazard (HZ); the HUMIDEX (i.e. an index that describes the temperature felt by an individual exposed to heat and humidity); and the cooling degrees (CD; i.e. a measure that reflects the energy needed to cool a building). The spatiotemporal characteristics of HZ, HUMIDEX and CD are unique (1 km/5 min) and enable the appraisal of the spatially distributed heat related health risk and energy demand of cities. In this paper, the real time generation of the high spatiotemporal HZ, HUMIDEX and CD products is discussed. In addition, a case study corresponding to Athens' September 2015 heatwave is presented so as to demonstrate their capabilities. The overall aim of the system is to provide high quality data to several different end users, such as health responders, and energy suppliers. The urban thermal monitoring web service is available at http://snf-652558.vm.okeanos.grnet.gr/treasure/portal/info.html.

Environmental assessment of wood industrial and collective (with heat network) heating. Synthetic report

International Nuclear Information System (INIS)

2005-12-01

This report proposes a synthesis of the results of an environmental assessment of wood industrial and collective heating. This study is based on a life cycle analysis which quantifies the impacts on the environment of all the related activities: fuel extraction, retailing, final use, and so on. Environmental impacts are assessed by means of different indicators: energetic assessment, greenhouse effect assessment, air pollution (acidification), water pollution (eutrophication), toxic material emissions in air and into the soils. Wood is compared to other heating sources (gas, fuel, electricity). Ways to improve this environmental assessment are discussed with respect to wood supply, boiler auxiliary equipment, boiler and combustion

Nuclear reactor equipped with a flooding tank and a residual heat removal and emergency cooling system

International Nuclear Information System (INIS)

Schabert, H.P.; Winkler, F.

1975-01-01

A description is given of a nuclear reactor such as a pressurized-water reactor or the like which is equipped with a flooding tank and a residual heat removal and emergency cooling system. The flooding tank is arranged within the containment shell at an elevation above the upper edge of the reactor core and contains a liquid for flooding the reactor core in the event of a loss of coolant

Emergence of Opinion Leaders Based on Agent Model and Its Impact to Stock Prices

Science.gov (United States)

Misawa, Tadanobu; Suzuki, Kyoko; Okano, Yoshitaka; Shimokawa, Tetsuya

Recently, we can be able to get a lot of information easily because information technology has been developed. Therefore, it is thought that the impact to a society by communication of information such as word of mouth has been growing. In this paper, we propose a model of emergence of opinion leader based on word of mouth in artificial stock market. Moreover, the process of emergence of opinion leader and impact to stock prices by opinion leader are verified by simulation.

Fitness-related differences in the rate of whole-body total heat loss in exercising young healthy women are heat-load dependent.

Science.gov (United States)

Lamarche, Dallon T; Notley, Sean R; Poirier, Martin P; Kenny, Glen P

2018-03-01

What is the central question of this study? Aerobic fitness modulates heat loss, albeit the heat load at which fitness-related differences occur in young healthy women remains unclear. What is the main finding and its importance? We demonstrate using direct calorimetry that fitness modulates heat loss in a heat-load dependent manner, with differences occurring between young women of low and high fitness and matched physical characteristics when the metabolic heat load is at least 400 W in hot, dry conditions. Although fitness has been known for some time to modulate heat loss, our findings define the metabolic heat load at which fitness-related differences occur. Aerobic fitness has recently been shown to alter heat loss capacity in a heat-load dependent manner in young men. However, given that sex-related differences in heat loss capacity exist, it is unclear whether this response is consistent in women. We therefore assessed whole-body total heat loss in young (21 ± 3 years old) healthy women matched for physical characteristics, but with low (low-fit; 35.8 ± 4.5 ml O 2  kg -1  min -1 ) or high aerobic fitness (high-fit; 53.1 ± 5.1 ml O 2  kg -1  min -1 ; both n = 8; indexed by peak oxygen consumption), during three 30 min bouts of cycling performed at increasing rates of metabolic heat production of 250 (Ex1), 325 (Ex2) and 400 W (Ex3), each separated by a 15 min recovery, in hot, dry conditions (40°C, 11% relative humidity). Whole-body total heat loss (evaporative ± dry heat exchange) and metabolic heat production were measured using direct and indirect calorimetry, respectively. Body heat content was measured as the temporal summation of heat production and loss. Total heat loss did not differ during Ex1 (low-fit, 215 ± 16 W; high-fit, 231 ± 20 W; P > 0.05) and Ex2 (low-fit, 278 ± 15 W; high-fit, 301 ± 20 W; P > 0.05), but was lower in the low-fit (316 ± 21 W) compared with the high-fit women (359 ± 32�

Impact of heat stress on crop yield—on the importance of considering canopy temperature

International Nuclear Information System (INIS)

Siebert, Stefan; Ewert, Frank; Eyshi Rezaei, Ehsan; Kage, Henning; Graß, Rikard

2014-01-01

Increasing crop productivity while simultaneously reducing the environmental footprint of crop production is considered a major challenge for the coming decades. Even short episodes of heat stress can reduce crop yield considerably causing low resource use efficiency. Studies on the impact of heat stress on crop yields over larger regions generally rely on temperatures measured by standard weather stations at 2 m height. Canopy temperatures measured in this study in field plots of rye were up to 7 °C higher than air temperature measured at typical weather station height with the differences in temperatures controlled by soil moisture contents. Relationships between heat stress and grain number derived from controlled environment studies were only confirmed under field conditions when canopy temperature was used to calculate stress thermal time. By using hourly mean temperatures measured by 78 weather stations located across Germany for the period 1994–2009 it is estimated, that mean yield declines in wheat due to heat stress during flowering were 0.7% when temperatures are measured at 2 m height, but yield declines increase to 22% for temperatures measured at the ground. These results suggest that canopy temperature should be simulated or estimated to reduce uncertainty in assessing heat stress impacts on crop yield. (letter)

Heat treatment effect on impact strength of 40Kh steel

International Nuclear Information System (INIS)

Golubev, V.K.; Novikov, S.A.; Sobolev, Yu.S.; Yukina, N.A.

1984-01-01

The paper presents results of studies on the effect of heat treatment on strength and pattern of 40Kh steel impact failure. Loading levels corresponding to macroscopic spalling microdamage initiation in the material are determined for three initial states. Metallographic study on the spalling failure pattern for 40Kh steel in different initial states and data on microhardness measurement are presented

A Sepsis-related Diagnosis Impacts Interventions and Predicts Outcomes for Emergency Patients with Severe Sepsis.

Science.gov (United States)

Kim, Mitchell; Watase, Taketo; Jablonowski, Karl D; Gatewood, Medley O; Henning, Daniel J

2017-10-01

Many patients meeting criteria for severe sepsis are not given a sepsis-related diagnosis by emergency physicians (EP). This study 1) compares emergency department (ED) interventions and in-hospital outcomes among patients with severe sepsis, based on the presence or absence of sepsis-related diagnosis, and 2) assesses how adverse outcomes relate to three-hour sepsis bundle completion among patients fulfilling severe sepsis criteria but not given a sepsis-related diagnosis. We performed a retrospective cohort study using patients meeting criteria for severe sepsis at two urban, academic tertiary care centers from March 2015 through May 2015. We included all ED patients with the following: 1) the 1992 Consensus definition of severe sepsis, including two or more systemic inflammatory response syndrome criteria and evidence of organ dysfunction; or 2) physician diagnosis of severe sepsis or septic shock. We excluded patients transferred to or from another hospital and those <18 years old. Patients with an EP-assigned sepsis diagnosis created the "Physician Diagnosis" group; the remaining patients composed the "Consensus Criteria" group. The primary outcome was in-hospital mortality. Secondary outcomes included completed elements of the current three-hour sepsis bundle; non-elective intubation; vasopressor administration; intensive care unit (ICU) admission from the ED; and transfer to the ICU in < 24 hours. We compared proportions of each outcome between groups using the chi-square test, and we also performed a stratified analysis using chi square to assess the association between failure to complete the three-hour bundle and adverse outcomes in each group. Of 418 patients identified with severe sepsis we excluded 54, leaving 364 patients for analysis: 121 "Physician Diagnosis" and 243 "Consensus Criteria." The "Physician Diagnosis" group had a higher in-hospital mortality (12.4% vs 3.3%, P < 0.01) and compliance with the three-hour sepsis bundle (52.1% vs 20.2%, P

Heat pulse analysis in JET and relation to local energy transport models

International Nuclear Information System (INIS)

Haas, J.C.M. de; Lopes Cardozo, N.J.; Han, W.; Sack, C.; Taroni, A.

1989-01-01

The evolution of a perturbation T e of the electron temperature depends on the linearised expression of the heat flux q e and may be not simply related to the local value of the electron heat conductivity χ e . It is possible that local heat transport models predicting similar temperature profiles and global energy confinement properties, imply a different propagation of heat pulses. We investigate here this possibility for the case of two models developed at JET. We also present results obtained at JET on a set of discharges covering the range of currents from 2 to 5 MA. Only L-modes, limiter discharges are considered here. Experimental results on the scaling of χ HP , the value of χ e related to heat pulse propagation, are compared with those of χ HP derived from the models. (author) 7 refs., 2 figs., 2 tabs

Health related vulnerability due to chronic diseases: Impact on clinical services across emergency shelters in mass disasters

Science.gov (United States)

Koleva, Yordanka Nikolova

Chronic diseases are increasingly recognized as major contributors to the global burden of disease. Individuals with chronic disease are particularly vulnerable during mass emergencies as they may suffer an interruption in their therapeutic programs, leading to life-threatening conditions and complications. Based on the individual and community risk factors framework, three categories are defined as the most vulnerable to extreme natural events: physically, psychologically, and socially vulnerable. Complex emergencies that occurred in the recent decade have provided evidence that these groups suffer more pronounced effects than others. Individuals seeking community support during emergencies have been predominantly medically dependent, elderly, children, people with chronic health conditions, and lower socioeconomic status. The purpose of this study was to investigate the effect of health-related vulnerability on shelter operations, and to estimate the burden of chronic disease on community resources following catastrophic events. A comprehensive survey data collection conducted by the United States Public Health Service in 2005 was used to evaluate clinical services for populations with health conditions accommodated by Louisiana temporary disaster shelters. Correlation and multiple regression analyses determined the relationship between shelter characteristics and the factors predicting shelters' needs for short-term assistance. Significant predictors were identified in all three explored domains: structural shelter characteristics (sponsor, interpreter needed); clinical characteristics (access to health providers, clinic on site, staff had no days off); population characteristics (census, compromised mental health alone, or in combination with chronic conditions and diseases with epidemic potential). Shelters sponsored by faith-based organizations were less likely to be in risk of rapid resource depletion. Shelters with large census demonstrated association with

A Danish Heat Atlas for Supply Strategies and Demand Side Management

DEFF Research Database (Denmark)

Möller, Bernd

The expansion of district heating, the assessment of the impact of heat supply strategies, as well as the analysis of significant heat demand savings require sound decision support at high detail. Data is needed to continuously quantify potentials and costs of measures in the end-use and supply...... heat demand and possible savings. The location of each building relative to heat supply technologies is mapped and used for the assessment of supply strategies by potentials, costs and environmental impact. Both elements can furthermore be used to balance investments in supply with investments...

State planning for winter energy emergencies: workshop materials

Energy Technology Data Exchange (ETDEWEB)

1978-04-01

Workshops were conducted in 5 cities to improve communications between the states and the Federal government so that both might be better prepared to avoid or mitigate the impacts of energy emergencies during the winter; to provide a forum for the exchange of technical information regarding selected energy demand restraint measures which could be implemented by individual states or regions in an energy emergency; and to promote the concept of pre-crisis contingency planning and strategy development, with particuliar emphasis on the need for interstate coordination of emergency plans. The major topics addressed by the discussion guide involved net energy use impact, implementation procedures and problems, and social and economic effects. The Task Force performed extensive research into the technical considerations and prior experience in implementing each of the demand restraint measures selected for discussion. Results and conclusions are summarized for reduction of thermostat setting for space conditioning and water heating; reduction in hours of operation and lighting in commercial establishments; reduction in hours of operation in school, and industrial fuel substitution. (MCW)

Effect of heat treatment on impact resistance of AU5GT and AS7G06 aluminum alloys

Energy Technology Data Exchange (ETDEWEB)

Muzamil, Muhammad; Akhtar, Maaz; Samiuddin, Muhammad; Mehdi, Murtuza [NED University of Engineering and Technology, Karachi (Pakistan)

2016-10-15

Impact strength is one of the major mechanical properties that a material should possess in order to absorb sudden changes in the load intensity. The objective of current study is to compare the impact strength of two material (AU5GT and AS7G06), which are used in different structural applications. Almost no work is available which compares the impact strength of selected grade alloys along with different heat treatment cycles. Specimens are heat treated first as per designed cycles, later impact testing is performed. Charpy impact test is conducted in accordance with ASTM E23-12 standard method on three samples with and without heat treatment for each cycle. Solutionizing on samples is done at constant time and temperature to achieve homogenization. Later, aging is conducted at different temperatures ranging from 100-200°C (different intervals) at constant time to find the effect of precipitation hardness that actually increases the strength. Sample hardness is determined using Vickers micro hardness testing machine for each heat treatment cycle. Charpy test results provided the impact energy that is used to determine the strength before fracture. Heat treated samples have showed increase in impact strength for AS7G06 aluminum alloy while AU5GT shows very little change. This is because of growing the precipitation with respect to temperature, which resulted in more hard regions across grains. Hardness also shows an increasing relationship, as expected. Fracture surfaces are analyzed on stereo microscopy and Scanning electron microscopy (SEM) to find the final mode of fracture, that is brittle, ductile or transitional (combination of both brittle and ductile)

Impact of meteorological parameters and air pollution on emergency department visits for cardiovascular diseases in the city of Zagreb, Croatia.

Science.gov (United States)

Pintarić, Sanja; Zeljković, Ivan; Pehnec, Gordana; Nesek, Višnja; Vrsalović, Mislav; Pintarić, Hrvoje

2016-09-01

The aim of this study was to investigate whether nitrogen dioxide (NO2), ozone (O3), and certain meteorological conditions had an impact on cardiovascular disease (CVD)-related emergency department (ED) visits in the metropolitan area of Zagreb. This retrospective, ecological study included 20,228 patients with a cardiovascular disease as their primary diagnosis who were examined in the EDs of two Croatian University Hospitals, Sisters of Charity and Holy Spirit, in the study period July 2008-June 2010. The median of daily CVD-related ED visits during the study period was 28 and was the highest during winter. A significant negative correlation was found between CVD-related emergency visits and air temperature measured no more than three days prior to the visit, and the highest negative correlation coefficient was measured two days earlier (R=0.266, p≤0.001). The number of CVD-related emergency visits significantly correlated with the average NO2 concentration on the same day (R=0.191, p<0.001). The results of multiple stepwise regression analysis showed that the number of CVD-related emergency visits depended on air temperature, and NO2 and O3 concentrations. The higher the air temperatures, the lower the number of daily CVD-related emergency visits (p<0.001). An increase in NO2 concentrations (p=0.005) and a decrease in O3 concentrations of two days earlier (p=0.006) led to an increase in CVD-related ED visits. In conclusion, the decrease in O3 concentrations and the increase in NO2, even if below the legally binding thresholds, could be associated with an increase in CVD-related emergency visits and a similar effect was observed with lower temperature measured no more than three days prior to the visit.

Study on Relative COP Changes with Increasing Heat Input Temperatures of Double Effect Steam Absorption Chillers

Directory of Open Access Journals (Sweden)

Abd Majid Mohd Amin

2016-01-01

Full Text Available Absorption chillers at cogeneration plants generate chilled water using steam supplied by heat recovery steam generators. The chillers are mainly of double effect type. The COP of double effect varies from 0.7 to 1.2 depending on operation and maintenance practices of the chillers. Heat input to the chillers during operations could have impact on the COP of the chillers. This study is on relative COP changes with increasing the heat input temperatures for a steam absorption chiller at a gas fueled cogeneration plant. Reversible COP analysis and zero order model were used for evaluating COP of the chiller for 118 days operation period. Results indicate increasing COP trends for both the reversible COP and zero model COP. Although the zero model COP are within the range of double effect absorption chiller, it is not so for the actual COP. The actual COP is below the range of normal double effect COP. It is recommended that economic replacement analysis to be undertaken to assess the feasibility either to repair or replace the existing absorption chiller.

Impacts of Exchange Rate Regime Choice on Macroeconomic Performance in Emerging Markets

Directory of Open Access Journals (Sweden)

Rüstem Yanar

2008-12-01

Full Text Available This paper investigates the impact of exchange rate regime choice on macroeconomic performance after Bretton Woods in emerging market countries. It is studied especially inflation, growth and financial crises. It’s found that for emerging market countries, fixed regimes are associated with lower inflation than floats. On growth effect of exchange rate regime choice is not same all period. Fixed regimes are associated with faster growth but after 1990 fixed regimes brought about slower growth. At the same time, fixed exchange rate regimes are associated with financial fragility after 1990 in emerging markets

General-purpose heat source: Research and development program, radioisotope thermoelectric generator/thin fragment impact test

International Nuclear Information System (INIS)

Reimus, M.A.H.; Hinckley, J.E.

1996-11-01

The general-purpose heat source provides power for space missions by transmitting the heat of 238 Pu decay to an array of thermoelectric elements in a radioisotope thermoelectric generator (RTG). Because the potential for a launch abort or return from orbit exists for any space mission, the heat source response to credible accident scenarios is being evaluated. This test was designed to provide information on the response of a loaded RTG to impact by a fragment similar to the type of fragment produced by breakup of the spacecraft propulsion module system. The results of this test indicated that impact by a thin aluminum fragment traveling at 306 m/s may result in significant damage to the converter housing, failure of one fueled clad, and release of a small quantity of fuel

Comparison of LCA results of low temperature heat plant using electric heat pump, absorption heat pump and gas-fired boiler

International Nuclear Information System (INIS)

Nitkiewicz, Anna; Sekret, Robert

2014-01-01

Highlights: • Usage of geothermal heat pump can bring environmental benefits. • The lowest environmental impact for whole life cycle is obtained for absorption heat pump. • The value of heat pump COP has a significant influence on environmental impact. • In case of coal based power generation the damage to human health is significant. - Abstract: This study compares the life cycle impacts of three heating plant systems which differ in their source of energy and the type of system. The following heating systems are considered: electric water-water heat pump, absorption water-water heat pump and natural gas fired boiler. The heat source for heat pump systems is low temperature geothermal source with temperature below 20 °C and spontaneous outflow 24 m 3 /h. It is assumed that the heat pumps and boiler are working in monovalent system. The analysis was carried out for heat networks temperature characteristic at 50/40 °C which is changing with outdoor temperature during heating season. The environmental life cycle impact is evaluated within life cycle assessment methodological framework. The method used for life cycle assessment is eco-indicator ‘99. The functional unit is defined as heating plant system with given amount of heat to be delivered to meet local heat demand in assumed average season. The data describing heating plant system is derived from literature and energy analysis of these systems. The data describing the preceding life cycle phases: extraction of raw materials and fuels, production of heating devices and their transportation is taken from Ecoinvent 2.0 life cycle inventory database. The results were analyzed on three levels of indicators: single score indicator, damage category indicators and impact category indicator. The indicators were calculated for characterization, normalization and weighting phases as well. SimaPro 7.3.2 is the software used to model the systems’ life cycle. The study shows that heating plants using a low

Disaster related heat illness

International Nuclear Information System (INIS)

Miyake, Yasufumi

2012-01-01

Explained and discussed are the outline of heat illness (HI), its raised risk and measures taken at the disaster of the Fukushima Nuclear Power Plant Accident (FNPPA; Mar. 2011). High temperature and humid environment induce HI through the fervescence and dehydration resulting in the intestinal ischemia/hypoxia and organ failure. Epidemiologic data of the heatstroke in Japan suggest its seemingly parallel incidence to seasonal hotness of the summer. HI is classified in either classical (non-exertional) or exertional heatstroke, both with severity of I (slight), II (slight symptom of the central nervous system (CNS); necessary for consultation) and III (most serious; having dysfunction of CNS, organ or coagulation). Therapy depends on the severity: I for the first aid on site, II necessary for carrying to hospital and III for hospitalization. Protection is possible by personal, neighbors' and managers' carefulness, and supply of sufficient water and minerals. Risk of HI was suddenly raised at taking measures to meet with the FNPPA. Japanese Association for Acute Medicine (JAAM) promptly organized JAAM-FNPPA Working Group to treat the emergent multiple incidents including the radiation exposure and HI as well. Exertional HI was mainly in labors wearing rather sealed closes to protect radiation to work for steps of the Accident, and which was similar to evacuees temporarily entering the evacuation area for visit to their own vacant houses. In the summer, classical HI was also a problem mainly in elderly living in the evacuation dwellings. Document of HI incidents and patients at FNPPA should be recorded for the reference to possible disaster in future. (T.T.)

Heat-Related Mortality in India: Excess All-Cause Mortality Associated with the 2010 Ahmedabad Heat Wave

Science.gov (United States)

Azhar, Gulrez Shah; Mavalankar, Dileep; Nori-Sarma, Amruta; Rajiva, Ajit; Dutta, Priya; Jaiswal, Anjali; Sheffield, Perry; Knowlton, Kim; Hess, Jeremy J.; Azhar, Gulrez Shah; Deol, Bhaskar; Bhaskar, Priya Shekhar; Hess, Jeremy; Jaiswal, Anjali; Khosla, Radhika; Knowlton, Kim; Mavalankar, Mavalankar; Rajiva, Ajit; Sarma, Amruta; Sheffield, Perry

2014-01-01

Introduction In the recent past, spells of extreme heat associated with appreciable mortality have been documented in developed countries, including North America and Europe. However, far fewer research reports are available from developing countries or specific cities in South Asia. In May 2010, Ahmedabad, India, faced a heat wave where the temperatures reached a high of 46.8°C with an apparent increase in mortality. The purpose of this study is to characterize the heat wave impact and assess the associated excess mortality. Methods We conducted an analysis of all-cause mortality associated with a May 2010 heat wave in Ahmedabad, Gujarat, India, to determine whether extreme heat leads to excess mortality. Counts of all-cause deaths from May 1–31, 2010 were compared with the mean of counts from temporally matched periods in May 2009 and 2011 to calculate excess mortality. Other analyses included a 7-day moving average, mortality rate ratio analysis, and relationship between daily maximum temperature and daily all-cause death counts over the entire year of 2010, using month-wise correlations. Results The May 2010 heat wave was associated with significant excess all-cause mortality. 4,462 all-cause deaths occurred, comprising an excess of 1,344 all-cause deaths, an estimated 43.1% increase when compared to the reference period (3,118 deaths). In monthly pair-wise comparisons for 2010, we found high correlations between mortality and daily maximum temperature during the locally hottest “summer” months of April (r = 0.69, pheat (May 19–25, 2010), mortality rate ratios were 1.76 [95% CI 1.67–1.83, pheat wave in Ahmedabad, Gujarat, India had a substantial effect on all-cause excess mortality, even in this city where hot temperatures prevail through much of April-June. PMID:24633076

A thesis investigating the impact of energy related environmental factors on domestic window design

Science.gov (United States)

McEvoy, Michael Edward

In recent years the extent of glazing in houses has been tightly controlled by the Building Regulations in order to save energy. In addition guidelines derived from passive solar principles prescribe the distribution of domestic windows between elevations according to their orientation. This thesis studies the impact of these energy-related environmental factors on domestic window design. The first of these investigations determined the degree to which limitations on the area and arrangement of windows are significant in terms of daylighting. The experiments measured the effect that passive solar requirements and detailed aspects of window design have on the quality of daylighting in houses. The volume of background ventilation required for domestic accommodation has recently been increased. As a result, in a well-sealed construction, heat loss due to background ventilation becomes a larger part of the total heat loss and larger air movements become a potential cause of draughts. The ventilation experiment sought to establish the impact of these more onerous requirements on comfort within rooms. The third experiment combines these factors and asks the question: Could windows be actively involved in overcoming some of these difficulties by being used to preheat ventilation air in order to diminish the extent of heat loss and to alleviate the problem of cold draughts? Also by designing the window to reclaim heat from the room might it be possible to offset the window's thermal inadequacy? Through analysis of responses to a questionnaire and the use of optimisation techniques, scenarios were suggested for the future modification of windows in relation to energy and health expectations. The conclusions form a commentary on recent and future revisions to the Building Regulations and determine whether or not the Regulations facilitate the environmental engineering of windows as an active component of a building's whole environmental system.

The impact of policies regulating alcohol trading hours and days on specific alcohol-related harms: a systematic review.

Science.gov (United States)

Sanchez-Ramirez, Diana C; Voaklander, Donald

2018-02-01

Evidence supports the expectation that changes in time of alcohol sales associate with changes in alcohol-related harm in both directions. However, to the best of our knowledge, no comprehensive systematic reviews had examined the effect of policies restricting time of alcohol trading on specific alcohol-related harms. To compile existing evidence related to the impact of policies regulating alcohol trading hours/days of on specific harm outcomes such as: assault/violence, motor vehicle crashes/fatalities, injury, visits to the emergency department/hospital, murder/homicides and crime. Systematic review of literature studying the impact of policies regulation alcohol trading times in alcohol-related harm, published between January 2000 and October 2016 in English language. Results support the premise that policies regulating times of alcohol trading and consumption can contribute to reduce injuries, alcohol-related hospitalisations/emergency department visits, homicides and crime. Although the impact of alcohol trading policies in assault/violence and motor vehicle crashes/fatalities is also positive, these associations seem to be more complex and require further study. Evidence suggests a potential direct effect of policies that regulate alcohol trading times in the prevention of injuries, alcohol-related hospitalisations, homicides and crime. The impact of these alcohol trading policies in assault/violence and motor vehicle crashes/fatalities is less compelling. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Impact of international humanitarian service-learning on emerging adult social competence: A mixed-methods evaluation

Directory of Open Access Journals (Sweden)

Paul Schvaneveldt

2016-09-01

Full Text Available This article presents the results from a study into international humanitarian service-learning experiences on young adult volunteers. Specifically, the service-learning experiences of emerging adults who had served in orphanages in Latin America were assessed, in a pre- and post-test design, for their development in areas of social competency such as identity, self-efficacy, self-esteem and ethnocentric attitudes. A mixed-methods design using both qualitative and quantitative measures was used. Both qualitative and quantitative results identified significant and important impacts on the development of the social competencies of these emerging adults. In addition, several qualitative themes illustrated that longer term international service-learning experiences have a profound impact on the social competence of emerging adults. Keywords: International humanitarian service, service-learning, emerging adult competency

Heat or Cold: Which One Exerts Greater Deleterious Effects on Health in a Basin Climate City? Impact of Ambient Temperature on Mortality in Chengdu, China

Directory of Open Access Journals (Sweden)

Yan Cui

2016-12-01

Full Text Available Background: Although studies from many countries have estimated the impact of ambient temperature on mortality, few have compared the relative impacts of heat and cold on health, especially in basin climate cities. We aimed to quantify the impact of ambient temperature on mortality, and to compare the contributions of heat and cold in a large basin climate city, i.e., Chengdu (Sichuan Province, China; Methods: We estimated the temperature-mortality association with a distributed lag non-linear model (DLNM with a maximum lag-time of 21 days while controlling for long time trends and day of week. We calculated the mortality risk attributable to heat and cold, which were defined as temperatures above and below an “optimum temperature” that corresponded to the point of minimum mortality. In addition, we explored effects of individual characteristics; Results: The analysis provides estimates of the overall mortality burden attributable to temperature, and then computes the components attributable to heat and cold. Overall, the total fraction of deaths caused by both heat and cold was 10.93% (95%CI: 7.99%–13.65%. Taken separately, cold was responsible for most of the burden (estimate 9.96%, 95%CI: 6.90%–12.81%, while the fraction attributable to heat was relatively small (estimate 0.97%, 95%CI: 0.46%–2.35%. The attributable risk (AR of respiratory diseases was higher (19.69%, 95%CI: 14.45%–24.24% than that of cardiovascular diseases (11.40%, 95%CI: 6.29%–16.01%; Conclusions: In Chengdu, temperature was responsible for a substantial fraction of deaths, with cold responsible for a higher proportion of deaths than heat. Respiratory diseases exert a larger effect on death than other diseases especially on cold days. There is potential to reduce respiratory-associated mortality especially among the aged population in basin climate cities when the temperature deviates beneath the optimum. The result may help to comprehensively assess the

Mitigation of Short-Lived Climate Pollutants from Residential Coal Heating and Combined Heating/Cooking Stoves: Impacts on the Cryosphere, Policy Options, and Co-benefits

Science.gov (United States)

Chafe, Z.; Anenberg, S.; Klimont, Z.; Kupiainen, K.; Lewis, J.; Metcalfe, J.; Pearson, P.

2017-12-01

Residential solid fuel combustion for cooking, heating, and other energy services contributes to indoor and outdoor air pollution, and creates impacts on the cryosphere. Solid fuel use often occurs in colder climates and at higher elevations, where a wide range of combustion emissions can reduce reflectivity of the snow- and ice-covered surfaces, causing climatic warming. Reducing short-lived climate pollutants (SLCPs), such as black carbon (BC), could have substantial climate and health co-benefits, especially in areas where emissions influence the cryosphere. A review of existing literature and emissions estimates, conducted as part of the Warsaw Summit on BC and Other Emissions from Residential Coal Heating Stoves and Combined Cooking/Heating Stoves, found little nationally-representative data on the fuels and technologies used for heating and combined cooking/heating. The GAINS model estimates that 24 million tonnes of coal equivalent were combusted by households for space heating globally in 2010, releasing 190 kilotons (kt) BC. Emissions from combined cooking/heating are virtually unknown. Policy instruments could mitigate cryosphere-relevant emissions of SLCPs from residential heating or cooking. These include indoor air quality guidelines, stove emission limits, bans on the use of specific fuels, regulatory codes that stipulate when burning can occur, stove changeout programs, and voluntary public education campaigns. These measures are being implemented in countries such as Chile (fuelwood moisture reduction campaign, energy efficiency, heating system improvements), Mongolia (stove renovation, fuel switching), Peru (improved stove programs), Poland (district heating, local fuel bans), United States (stove emission regulation) and throughout the European Community (Ecodesign Directive). Few, if any, of these regulations are likely to reduce emissions from combined cooking/heating. This research team found no global platform to create and share model

What do New Yorkers Think about Impacts and Adaptation to Heat Waves? An Evaluation Tool to Incorporate Perception of Low-Income Groups into Heat Wave Adaptation Scenarios in New York City

Directory of Open Access Journals (Sweden)

Sadra Matmir

2017-07-01

Full Text Available Low-income residents are among the most vulnerable groups to climate change in urban areas, particularly regarding heat stress. However, their perceptions about heat and the impacts they face go often undocumented, and are seldom considered in decision-making processes delivering adaptation. This paper presents a robust tool to allow the integration of perception, concerns and impacts of different income groups in urban adaptation planning and governance, using the City of New York as a case study. Employing online interviews—a solid method to reach poorer households—and Fuzzy Cognitive Mapping, we compare impacts and adaptation perception to heat and simulate adaptation scenarios. Results reveal that lower income groups are more concerned about impacts of heat waves than middle- and high-income populations. All income groups see citizens more in charge of adaptation, although more people from the lower income groups regard it necessary to do much more to protect themselves, proportionately more people from the higher income groups think they are doing the right amount. The scenario analysis shows that, compared to investments in the water/electricity and health system, improvements in the transit system would yield the largest decrease in negative impacts during heat, benefitting all income groups jointly.

HIGH IMPACT HEAT WAVES OVER THE EURO-MEDITERRANEAN REGION AND TURKEY - IN CONCERT WITH ATMOSPHERIC BLOCKING AND LARGE DYNAMICAL AND PHYSICAL ANOMALIES

Directory of Open Access Journals (Sweden)

Meral Demirtaş

2017-03-01

Full Text Available The increase in high impact heat waves in the Euro-Mediterranean region and Turkey is related to a number of concurring factors that include the persistent anticyclonic weather regimes. The present study investigates the June-July-August (JJA of 2000, 2007 and 2010 heat wave events in concert with some meteorological anomalies (the 500 hPa geopotential height, 850 hPa temperature, sea surface temperature and soil wetness and blocking anticyclones, focusing on heat wave occurrences on a grid point base. Detection methods for atmospheric blocking and heat wave are introduced and applied for the mentioned years. During the 2000 JJA very high temperatures were recorded over the Balkan Peninsula and in Turkey where 42 cities had breaking all time highest temperature records for June, but the duration of heat wave was the shortest. The 2007 summer was also abnormally hot for the region and record breaking temperatures were observed in Greece, Romania, Bulgaria and Turkey where 34 cities had highest temperature records for June and July, and the highest total heat wave duration was 60-70 days. The 2010 JJA period was extremely hot over Russia and nearby countries including Turkey where 9 cities had highest temperature records for August. The 2010 case was marked for; large anomalies, the longest heat wave duration and the highest heat wave intensity. In all cases, heat wave occurrences found to be particularly high over the western part of Turkey. The abnormally hot summers of 2000, 2007 and 2010 could reflect summers to come. The results indicate that summer climate might experience a pronounced increase in year-to-year variability. Increase in variability might be able to explain the high impact heat waves, and would strongly affect their incidence in the future. The results may also contribute to a better understanding of heat waves in context of climate variability.

Cost of preventing workplace heat-related illness through worker breaks and the benefit of climate-change mitigation

Science.gov (United States)

Takakura, Jun'ya; Fujimori, Shinichiro; Takahashi, Kiyoshi; Hijioka, Yasuaki; Hasegawa, Tomoko; Honda, Yasushi; Masui, Toshihiko

2017-06-01

The exposure of workers to hot environments is expected to increase as a result of climate change. In order to prevent heat-related illness, it is recommended that workers take breaks during working hours. However, this would lead to reductions in worktime and labor productivity. In this study, we estimate the economic cost of heat-related illness prevention through worker breaks associated with climate change under a wide range of climatic and socioeconomic conditions. We calculate the worktime reduction based on the recommendation of work/rest ratio and the estimated future wet bulb glove temperature, which is an index of heat stresses. Corresponding GDP losses (cost of heat-related illness prevention through worker breaks) are estimated using a computable general equilibrium model throughout this century. Under the highest emission scenario, GDP losses in 2100 will range from 2.6 to 4.0% compared to the current climate conditions. On the other hand, GDP losses will be less than 0.5% if the 2.0 °C goal is achieved. The benefit of climate-change mitigation for avoiding worktime loss is comparable to the cost of mitigation (cost of the greenhouse gas emission reduction) under the 2.0 °C goal. The relationship between the cost of heat-related illness prevention through worker breaks and global average temperature rise is approximately linear, and the difference in economic loss between the 1.5 °C goal and the 2.0 °C goal is expected to be approximately 0.3% of global GDP in 2100. Although climate mitigation and socioeconomic development can limit the vulnerable regions and sectors, particularly in developing countries, outdoor work is still expected to be affected. The effectiveness of some adaptation measures such as additional installation of air conditioning devices or shifting the time of day for working are also suggested. In order to reduce the economic impacts, adaptation measures should also be implemented as well as pursing ambitious climate change

Emerging Food Processing Technologies and Factors Impacting their Industrial Adoption.

Science.gov (United States)

Priyadarshini, Anushree; Rajauria, Gaurav; O'Donnell, Colm P; Tiwari, Brijesh K

2018-06-04

Innovative food processing technologies have been widely investigated in food processing research in recent years. These technologies offer key advantages for advancing the preservation and quality of conventional foods, for combatting the growing challenges posed by globalization, increased competitive pressures and diverse consumer demands. However, there is a need to increase the level of adoption of novel technologies to ensure the potential benefits of these technologies are exploited more by the food industry. This review outlines emerging thermal and non-thermal food processing technologies with regard to their mechanisms, applications and commercial aspects. The level of adoption of novel food processing technologies by the food industry is outlined and the factors that impact their industrial adoption are discussed. At an industry level, the technological capabilities of individual companies, their size, market share as well as their absorptive capacity impact adoption of a novel technology. Characteristics of the technology itself such as costs involved in its development and commercialization, associated risks and relative advantage, its level of complexity and compatibility influence the technology's adoption. The review concludes that a deep understanding of the development and application of a technology along with the factors influencing its acceptance are critical for its commercial adoption.

Assessing the Thermal Environmental Impacts of an Groundwater Heat Pump in Southeastern Washington State

Energy Technology Data Exchange (ETDEWEB)

Freedman, Vicky L.; Waichler, Scott R.; Mackley, Rob D.; Horner, Jacob A.

2012-04-01

A thermal analysis of a large-scale (e.g., 1900 gpm), open-loop ground source heat pump (GSHP) installed on the Pacific Northwest National Laboratory (PNNL) campus in southeastern Washington State has been performed using a numerical modeling approach. Water temperature increases at the upgradient extraction wells in the system and at the downgradient Columbia River are potential concerns, especially since heat rejection to the subsurface will occur year-round. Hence, thermal impacts of the open-loop GSHP were investigated to identify operational scenarios that minimized downgradient environmental impacts at the river, and upgradient temperature drift at the production wells. Simulations examined the sensitivity of the system to variations in pumping rates and injected water temperatures, as well as to hydraulic conductivity estimates of the aquifer. Results demonstrated that both downgradient and upgradient thermal impacts were more sensitive to injection flow rates than estimates of hydraulic conductivity. Higher injection rates at lower temperatures resulted in higher temperature increases at the extraction wells but lower increases at the river. Conversely, lower pumping rates and higher injected water temperatures resulted in a smaller temperature increase at the extraction wells, but higher increases at the river. The scenario with lower pumping rates is operationally more efficient, but does increase the likelihood of a thermal plume discharging into the Columbia River. However, this impact would be mitigated by mixing within the hyporheic zone and the Columbia River. The impact under current operational conditions is negligible, but future increases in heat rejection could require a compromise between maximizing operational efficiency and minimizing temperature increases at the shoreline.

Heat-Related Illnesses

Medline Plus

Full Text Available ... moist, pale skin, rapid pulse, elevated or lowered blood pressure, nausea, loss of consciousness, vomiting or a high body temperature. For late stage heat stroke symptoms, cool the person further by positioning ...

Impact of moisture content in AAC on its heat insulation properties

Science.gov (United States)

Rubene, S.; Vilnitis, M.

2017-10-01

One of the most popular trends in construction industry is sustainable construction. Therefore, application of construction materials with high insulation characteristics has significantly increased during the past decade. Requirements for application of construction materials with high insulation parameters are required not only by means of energy saving and idea of sustainable construction but also by legislative requirements. Autoclaved aerated concrete (AAC) is a load bearing construction material, which has high heat insulation parameters. However, if the AAC masonry construction has high moisture content the heat insulation properties of the material decrease significantly. This fact lead to the necessity for the on-site control of moisture content in AAC in order to avoid inconsistency between the designed and actual thermal resistivity values of external delimiting constructions. Research of the impact of moisture content in AAC on its heat insulation properties has been presented in this paper.

[Factors related to patient satisfaction with hospital emergency services].

Science.gov (United States)

Parra Hidalgo, Pedro; Bermejo Alegría, Rosa María; Más Castillo, Adelia; Hidalgo Montesinos, María Dolores; Gomis Cebrián, Rafael; Calle Urra, José Eduardo

2012-01-01

To determine the perceived quality variables related to satisfaction and to identify the influence of sociodemographic factors on user satisfaction with hospital emergencies. A telephone survey was conducted with a specifically designed questionnaire for use in a sample of 3,600 users of hospital emergency services in nine public hospitals in 2008 and 2009. The adjusted model including all perceived quality and sociodemographic variables explained 47.1% of the variance (adjusted R(2)). Of all the independent variables included, only eight were significant in predicting the level of patient satisfaction. These variables were related to the patient's opinion of the relationship with medical staff (p = 0.041), nurses' and porters' professionalism (p = 0.010 and 0.022), infrastructure (cleanliness and comfort) (p = 0.033 and 0.008), information received at discharge (p = 0.000), waiting time in the emergency department (p = 0.000) and the perception of treatment-diagnosis without failure (p = 0.028). The variables influencing emergency patients' satisfaction were determined, allowing areas where corrective action could be introduced to be identified. In addition, possible confounding factors that should be controlled for when comparing results among distinct hospitals were identified. The emergency satisfaction questionnaire is a useful instrument to evaluate and improve quality of care. Copyright © 2011 SESPAS. Published by Elsevier Espana. All rights reserved.

Heat-Related Illnesses

Medline Plus

Full Text Available ... or a high body temperature. For late stage heat stroke symptoms, cool the person further by positioning ice or cold packs on ... Injury Chest Pain Is ALWAYS A Reason To Go To The ...

Female farmworkers' perceptions of heat-related illness and pregnancy health.

Science.gov (United States)

Flocks, Joan; Vi Thien Mac, Valerie; Runkle, Jennifer; Tovar-Aguilar, Jose Antonio; Economos, Jeannie; McCauley, Linda A

2013-01-01

Although agricultural workers have elevated risks of heat-related illnesses (HRI), pregnant farmworkers exposed to extreme heat face additional health risk, including poor pregnancy health and birth outcomes. Qualitative data from five focus groups with 35 female Hispanic and Haitian nursery and fernery workers provide details about the women's perceptions of HRI and pregnancy. Participants believe that heat exposure can adversely affect general, pregnancy, and fetal health, yet feel they lack control over workplace conditions and that they lack training about these specific risks. These data are being used to develop culturally appropriate educational materials emphasizing health promoting and protective behaviors during pregnancy.

Biodiversity loss, emerging infectious diseases and impact on human and crops

International Nuclear Information System (INIS)

Shinwari, Z.K.; Gilani, S.A.; Khan, A.L.

2012-01-01

We are losing biodiversity through several factors ranging from global warming, climatic change, unsustainable use of natural resources, human settlements, demand for food, medicine etc. Consequently, the biodiversity losses are causing emergence of infectious diseases (EIDs) which are making them more virulent than the past. Both biodiversity loss and emergence of diseases significantly impact the human derived benefits in-terms of economy and food. Ecological stability, productivity and food-web interactions are indirectly correlated with biodiversity and any change in these will cause losses in biodiversity that would certainly influence the human derived benefits and crops. The current article reviews the biodiversity losses and emerging infectious diseases at various levels reported by recent literature which will help in current status of EIDs and future recommendations. (author)

The impact of financial development on energy consumption in emerging economies

International Nuclear Information System (INIS)

Sadorsky, Perry

2010-01-01

Financial development is often cited as a very important driver of economic growth in emerging economies and it is thus likely that financial development affects energy demand. This study uses generalized method of moments estimation techniques to examine the impact of financial development on energy consumption in a sample of emerging countries. Several different measures of financial development are examined. Using a panel data set on 22 emerging countries covering the period 1990-2006, the empirical results show a positive and statistically significant relationship between financial development and energy consumption when financial development is measured using stock market variables like stock market capitalization to GDP, stock market value traded to GDP, and stock market turnover. The implications of these results for energy policy are discussed.

Heat-Related Illnesses

Medline Plus

Full Text Available ... exhaustion symptoms include cool, moist, pale or flushed skin; headache; dizziness; weakness; feeling exhausted; heavy sweating; nausea; ... stage of heat illness) include flushed, hot, dry skin; fainting; a rapid, weak pulse; rapid, shallow breathing; ...

Heat-Related Illnesses

Medline Plus

Full Text Available ... weak pulse; rapid, shallow breathing; vomiting; and increased body temperature of more than 104 degrees. People with ... nausea, loss of consciousness, vomiting or a high body temperature. For late stage heat stroke symptoms, cool ...

The Comprehensive Emergent Literacy Model

OpenAIRE

Leigh Rohde

2015-01-01

The early skills of Emergent Literacy include the knowledge and abilities related to the alphabet, phonological awareness, symbolic representation, and communication. However, existing models of emergent literacy focus on discrete skills and miss the perspective of the surrounding environment. Early literacy skills, including their relationship to one another, and the substantial impact of the setting and context, are ...

Heat Transfer Analysis for a Fixed CST Column

International Nuclear Information System (INIS)

Lee, S.Y.

2004-01-01

In support of a small column ion exchange (SCIX) process for the Savannah River Site waste processing program, a transient two-dimensional heat transfer model that includes the conduction process neglecting the convection cooling mechanism inside the crystalline silicotitanate (CST) column has been constructed and heat transfer calculations made for the present design configurations. For this situation, a no process flow condition through the column was assumed as one of the reference conditions for the simulation of a loss-of-flow accident. A series of the modeling calculations has been performed using a computational heat transfer approach. Results for the baseline model indicate that transit times to reach 130 degrees Celsius maximum temperature of the CST-salt solution column are about 96 hours when the 20-in CST column with 300 Ci/liter heat generation source and 25 degrees Celsius initial column temperature is cooled by natural convection of external air as a primary heat transfer mechanism. The modeling results for the 28-in column equipped with water jacket systems on the external wall surface of the column and water coolant pipe at the center of the CST column demonstrate that the column loaded with 300 Ci/liter heat source can be maintained non-boiling indefinitely. Sensitivity calculations for several alternate column sizes, heat loads of the packed column, engineered cooling systems, and various ambient conditions at the exterior wall of the column have been performed under the reference conditions of the CST-salt solution to assess the impact of those parameters on the peak temperatures of the packed column for a given transient time. The results indicate that a water-coolant pipe at the center of the CST column filled with salt solution is the most effective one among the potential design parameters related to the thermal energy dissipation of decay heat load. It is noted that the cooling mechanism at the wall boundary of the column has significant

Heat treatment effects on impact toughness of 9Cr-1MoVNb and 12Cr-1MoVW steels irradiated to 100 dpa

Energy Technology Data Exchange (ETDEWEB)

Klueh, R.L.; Alexander, D.J. [Oak Ridge National Lab., TN (United States)

1997-08-01

Plates of 9Cr-1MoVNb and 12Cr-1MoVW steels were given four different heat treatments: two normalizing treatments were used and for each normalizing treatment two tempers were used. Miniature Charpy specimens from each heat treatment were irradiated to {approx}19.5 dpa at 365{degrees}C and to {approx}100 dpa at 420{degrees}C in the Fast Flux Test Facility (FFTF). In previous work, the same materials were irradiated to 4-5 dpa at 365{degrees}C and 35-36 dpa at 420{degrees}C in FFTF. The tests indicated that prior austenite grain size, which was varied by the different normalizing treatments, had a significant effect on impact behavior of the 9Cr-1MoVNb but not on the 12Cr-1MoVW. Tempering treatment had relatively little effect on the shift in DBTT for both steels. Conclusions are presented on how heat treatment can be used to optimize impact properties.

Heat treatment effects on impact toughness of 9Cr-1MoVNb and 12Cr-1MoVW steels irradiated to 100 dpa

International Nuclear Information System (INIS)

Klueh, R.L.; Alexander, D.J.

1997-01-01

Plates of 9Cr-1MoVNb and 12Cr-1MoVW steels were given four different heat treatments: two normalizing treatments were used and for each normalizing treatment two tempers were used. Miniature Charpy specimens from each heat treatment were irradiated to ∼19.5 dpa at 365 degrees C and to ∼100 dpa at 420 degrees C in the Fast Flux Test Facility (FFTF). In previous work, the same materials were irradiated to 4-5 dpa at 365 degrees C and 35-36 dpa at 420 degrees C in FFTF. The tests indicated that prior austenite grain size, which was varied by the different normalizing treatments, had a significant effect on impact behavior of the 9Cr-1MoVNb but not on the 12Cr-1MoVW. Tempering treatment had relatively little effect on the shift in DBTT for both steels. Conclusions are presented on how heat treatment can be used to optimize impact properties

Analysis of a Community-based Intervention to Reduce Heat-related Illness during Heat Waves in Licheng, China: a Quasi-experimental Study.

Science.gov (United States)

Li, Jing; Xu, Xin; Wang, Jun; Zhao, Yun; Song, Xiu Ping; Liu, Zhi Dong; Cao, Li Na; Jiang, Bao Fa; Liu, Qi Yong

2016-11-01

To reduce health-related threats of heat waves, interventions have been implemented in many parts of the world. However, there is a lack of higher-level evidence concerning the intervention efficacy. This study aimed to determine the efficacy of an intervention to reduce the number of heat-related illnesses. A quasi-experimental design was employed by two cross-sectional surveys in the year 2014 and 2015, including 2,240 participants and 2,356 participants, respectively. Each survey was designed to include one control group and one intervention group, which conducted in Licheng, China. A representative sample was selected using a multistage sampling method. Data, collected from questionnaires about heat waves in 2014 and 2015, were analyzed using a difference-in-difference analysis and cost effectiveness analysis. Outcomes included changes in the prevalence of heat-related illnesses and cost-effectiveness variables. Relative to the control participants, the prevalence of heat-related illness in the intervention participants decreased to a greater extent in rural areas than in urban areas (OR=0.495 vs. OR=1.281). Moreover, the cost-effectiveness ratio in the intervention group was less than that in the control group (US$15.06 vs. US$15.69 per participant). Furthermore, to avoid one additional patient, the incremental cost-effectiveness ratio showed that an additional US$14.47 would be needed for the intervention compared to when no intervention was applied. The intervention program may be considered a worthwhile investment for rural areas that are more likely to experience heat waves. Meanwhile, corresponding improving measures should be presented towards urban areas. Future research should examine whether the intervention strategies could be spread out in other domestic or international regions where heat waves are usually experienced. Copyright © 2016 The Editorial Board of Biomedical and Environmental Sciences. Published by China CDC. All rights reserved.

Heat-Related Illnesses

Medline Plus

Full Text Available ... weak pulse; rapid, shallow breathing; vomiting; and increased body temperature of more than 104 degrees. People with these ... nausea, loss of consciousness, vomiting or a high body temperature. For late stage heat stroke symptoms, cool the ...

Impact of radius and skew angle on areal density in heat assisted magnetic recording hard disk drives

Science.gov (United States)

Cordle, Michael; Rea, Chris; Jury, Jason; Rausch, Tim; Hardie, Cal; Gage, Edward; Victora, R. H.

2018-05-01

This study aims to investigate the impact that factors such as skew, radius, and transition curvature have on areal density capability in heat-assisted magnetic recording hard disk drives. We explore a "ballistic seek" approach for capturing in-situ scan line images of the magnetization footprint on the recording media, and extract parametric results of recording characteristics such as transition curvature. We take full advantage of the significantly improved cycle time to apply a statistical treatment to relatively large samples of experimental curvature data to evaluate measurement capability. Quantitative analysis of factors that impact transition curvature reveals an asymmetry in the curvature profile that is strongly correlated to skew angle. Another less obvious skew-related effect is an overall decrease in curvature as skew angle increases. Using conventional perpendicular magnetic recording as the reference case, we characterize areal density capability as a function of recording position.

[Deontology in generalists-specialists relations in domestic emergencies].

Science.gov (United States)

Leemans, P

2000-09-01

The deontological rules defining the relations between the general practitioners and specialists about domestic emergencies are clearly exposed in the code edited by the National Medical Council of Belgium. Ethical particularities exist. During an emergency situation, the patient could lose his freedom as well as his autonomy and might become a technical subject rather than an ethical person. The ethical values are in opposition with a medical practice trying to be more and more efficient with as a corollary, the necessity to have a full and permanent access to personal medical data.

District heating

International Nuclear Information System (INIS)

Hansen, L.

1993-01-01

The environmental risks and uncertainties of a high-energy future are disturbing and give rise to several reservations concerning the use of fossil fuels. A number of technologies will help to reduce atmospheric pollution. In Denmark special importance is attached to the following: Energy conservation. Efficient energy conversion. Renewable energy sources. District heating, combined production of heat and power. Many agree that district heating (DH), produced by the traditional heat-only plant, and combined heat and power (CHP) have enormous potential when considering thermal efficiency and lowered environmental impacts: The basic technology of each is proven, it would be relatively simple to satisfy a substantial part of the energy demand, and their high efficiencies mean reduced pollution including greenhouse gas emissions. This is especially important in high population density areas - the obviously preferred sites for such energy generation. Compared with individual heating DH can provide a community with an operationally efficient and most often also an economically competitive heat supply. This is particularly true under the circumstances where the DH system is supplied from CHP plants. Their use results in very substantial improvements in overall efficiency. Further environmental improvements arise from the reduced air pollution obtainable in reasonably large CHP plants equipped with flue gas cleaning to remove particles, sulphur dioxide, and nitrogen acids. As a consequence of these considerations, DH plays an important role in fulfilling the space and water heating demand in many countries. This is especially the case in Denmark where this technology is utilised to a very great extent. Indeed, DH is one of the reasons why Denmark has relatively good air quality in the cities. (au)

Emerging adulthood and Type 1 diabetes

DEFF Research Database (Denmark)

Vallis, M; Willaing, I; Holt, R I G

2018-01-01

and Needs (DAWN2) study. Participants completed a series of surveys incorporating demographic as well as clinical questions (comorbidities, hypoglycaemia) and validated self-report scales concerning psychosocial (health impact, quality of life, beliefs and attitudes, self-management behaviours, healthcare...... aged >30 years of age; however, emerging adults experienced greater diabetes-specific distress and were less engaged in self-management. Diabetes education was related to a number of indicators, while experience of discrimination was harmful, but these impacts did not differ between emerging adults...

Characterization of a solar photovoltaic/loop-heat-pipe heat pump water heating system

International Nuclear Information System (INIS)

Zhang, Xingxing; Zhao, Xudong; Xu, Jihuan; Yu, Xiaotong

2013-01-01

Highlights: ► Describing concept and operating principle of the PV/LHP heat pump water heating system. ► Developing a numerical model to evaluate the performance of the system. ► Experimental testing of the prototype system. ► Characterizing the system performance using parallel comparison between the modelling and experimental results. ► Investigating the impact of the operating conditions to the system’s performance. -- Abstract: This paper introduced the concept, potential application and benefits relating to a novel solar photovoltaic/loop-heat-pipe (PV/LHP) heat pump system for hot water generation. On this basis, the paper reported the process and results of characterizing the performance of such a system, which was undertaken through dedicated thermo-fluid and energy balance analyses, computer model development and operation, and experimental verification and modification. The fundamental heat transfer, fluid flow and photovoltaic governing equations were applied to characterize the energy conversion and transfer processes occurring in each part and whole system layout; while the energy balance approach was utilized to enable inter-connection and resolution of the grouped equations. As a result, a dedicated computer model was developed and used to calculate the operational parameters, optimise the geometrical configurations and sizes, and recommend the appropriate operational condition relating to the system. Further, an experimental rig was constructed and utilized to acquire the relevant measurement data that thus enabled the parallel comparison between the simulation and experiment. It is concluded that the testing and modelling results are in good agreement, indicating that the model has the reasonable accuracy in predicting the system’s performance. Under the given experimental conditions, the electrical, thermal and overall efficiency of the PV/LHP module were around 10%, 40% and 50% respectively; whilst the system’s overall performance

Health impact of sport and exercise in emerging adult men: a prospective study.

Science.gov (United States)

Henchoz, Yves; Baggio, Stéphanie; N'Goran, Alexandra A; Studer, Joseph; Deline, Stéphane; Mohler-Kuo, Meichun; Daeppen, Jean-Bernard; Gmel, Gerhard

2014-10-01

Health benefits of sport and exercise are well documented in children, adolescents and adults, but little is known about emerging adulthood-a period of life characterized by significant demographic and developmental changes. The present study aimed to assess the health impact of changes in sport and exercise levels during that specific period of life. The analysis used baseline and 15-month follow-up data (N = 4,846) from the cohort study on substance use risk factors. Associations between baseline exercise levels or changes in exercise levels and health indicators (i.e., health-related quality of life, depression, body mass index, alcohol dependence, nicotine dependence and cannabis use disorder) were measured using chi-squared tests and ANOVA. Direction of effects was tested using cross-lagged analysis. At baseline, all health indicator scores were observed to be better for regular exercisers than for other exercise levels. At follow-up, participants who had maintained regular exercise over time had better scores than those who had remained irregular exercisers or had discontinued, but their scores for health-related quality of life and depression were close to those of participants who had adopted regular exercise after the baseline questionnaire. Cross-lagged analysis indicated that regular exercise at baseline was a significant predictor of health-related quality of life and substance use dependence at follow-up, but was itself predicted only by health-related quality of life. From a health promotion perspective, this study emphasizes how important it is for emerging adult men to maintain, or adopt, regular sport and exercise.

Validation of a Syndromic Case Definition for Detecting Emergency Department Visits Potentially Related to Marijuana.

Science.gov (United States)

DeYoung, Kathryn; Chen, Yushiuan; Beum, Robert; Askenazi, Michele; Zimmerman, Cali; Davidson, Arthur J

Reliable methods are needed to monitor the public health impact of changing laws and perceptions about marijuana. Structured and free-text emergency department (ED) visit data offer an opportunity to monitor the impact of these changes in near-real time. Our objectives were to (1) generate and validate a syndromic case definition for ED visits potentially related to marijuana and (2) describe a method for doing so that was less resource intensive than traditional methods. We developed a syndromic case definition for ED visits potentially related to marijuana, applied it to BioSense 2.0 data from 15 hospitals in the Denver, Colorado, metropolitan area for the period September through October 2015, and manually reviewed each case to determine true positives and false positives. We used the number of visits identified by and the positive predictive value (PPV) for each search term and field to refine the definition for the second round of validation on data from February through March 2016. Of 126 646 ED visits during the first period, terms in 524 ED visit records matched ≥1 search term in the initial case definition (PPV, 92.7%). Of 140 932 ED visits during the second period, terms in 698 ED visit records matched ≥1 search term in the revised case definition (PPV, 95.7%). After another revision, the final case definition contained 6 keywords for marijuana or derivatives and 5 diagnosis codes for cannabis use, abuse, dependence, poisoning, and lung disease. Our syndromic case definition and validation method for ED visits potentially related to marijuana could be used by other public health jurisdictions to monitor local trends and for other emerging concerns.

Effect evaluation of a heated ambulance mattress-prototype on thermal comfort and patients' temperatures in prehospital emergency care - an intervention study.

Science.gov (United States)

Aléx, Jonas; Karlsson, Stig; Björnstig, Ulf; Saveman, Britt-Inger

2015-01-01

Background The ambulance milieu does not offer good thermal comfort to patients during the cold Swedish winters. Patients' exposure to cold temperatures combined with a cold ambulance mattress seems to be the major factor leading to an overall sensation of discomfort. There is little research on the effect of active heat delivered from underneath in ambulance care. Therefore, the aim of this study was to evaluate the effect of an electrically heated ambulance mattress-prototype on thermal comfort and patients' temperatures in the prehospital emergency care. Methods A quantitative intervention study on ambulance care was conducted in the north of Sweden. The ambulance used for the intervention group (n=30) was equipped with an electrically heated mattress on the regular ambulance stretcher whereas for the control group (n=30) no active heat was provided on the stretcher. Outcome variables were measured as thermal comfort on the Cold Discomfort Scale (CDS), subjective comments on cold experiences, and finger, ear and air temperatures. Results Thermal comfort, measured by CDS, improved during the ambulance transport to the emergency department in the intervention group (p=0.001) but decreased in the control group (p=0.014). A significant higher proportion (57%) of the control group rated the stretcher as cold to lie down compared to the intervention group (3%, pthermal comfort and may prevent the negative consequences of cold stress.

Effect evaluation of a heated ambulance mattress-prototype on thermal comfort and patients' temperatures in prehospital emergency care--an intervention study.

Science.gov (United States)

Aléx, Jonas; Karlsson, Stig; Björnstig, Ulf; Saveman, Britt-Inger

2015-01-01

The ambulance milieu does not offer good thermal comfort to patients during the cold Swedish winters. Patients' exposure to cold temperatures combined with a cold ambulance mattress seems to be the major factor leading to an overall sensation of discomfort. There is little research on the effect of active heat delivered from underneath in ambulance care. Therefore, the aim of this study was to evaluate the effect of an electrically heated ambulance mattress-prototype on thermal comfort and patients' temperatures in the prehospital emergency care. A quantitative intervention study on ambulance care was conducted in the north of Sweden. The ambulance used for the intervention group (n=30) was equipped with an electrically heated mattress on the regular ambulance stretcher whereas for the control group (n=30) no active heat was provided on the stretcher. Outcome variables were measured as thermal comfort on the Cold Discomfort Scale (CDS), subjective comments on cold experiences, and finger, ear and air temperatures. Thermal comfort, measured by CDS, improved during the ambulance transport to the emergency department in the intervention group (p=0.001) but decreased in the control group (p=0.014). A significant higher proportion (57%) of the control group rated the stretcher as cold to lie down compared to the intervention group (3%, pthermal comfort and may prevent the negative consequences of cold stress.

Hot under the collar: The impact of heat on game play.

Science.gov (United States)

Young, Michael E; McCoy, Anthony W; Hutson, John P; Schlabach, Meredith; Eckels, Steven

2017-03-01

High temperatures have been documented to affect behavior in a variety of ways depending on the nature of the task. We extended this prior research by examining the effects of dynamically changing temperature on various aspects of performance in a video game task. In the span of approximately an hour, temperature was gradually increased, stayed constant for a period of time, and gradually decreased to baseline. The gaming task was a variation on one used to assess impulsivity in participants thus allowing the possibility of assessing the effects of temperature on impulsive choice. Rather than heat increasing impulsivity and thus decreasing wait times, participants showed increases in wait times as temperature increased which either suggests that participants were becoming more self-controlled under heat or that the documented negative impact of heat on motor functioning was dominating their performance. Importantly, the participant's sensitivity to the changing task requirements was not affected by changes in temperature. Copyright © 2016 Elsevier Ltd. All rights reserved.

Renewable heat: Waste heat, an emerging sector full of resources. An eco-district fed by the heat from a data center; Integrating objectives matching the ambitions, clear and on the long term; High-energy wastes in Brittany: Brest is securing its heat network with multiple energies

International Nuclear Information System (INIS)

Richard, Aude

2017-01-01

This file on renewable heat contains four articles which themes are: waste heat (from incineration plants or industrial sites) is an emerging sector full of resources, which benefits now of a financial subsidy from ADEME, the French organization for energy and environment; an example is given with Chamtor, a highly energy-consuming cereal transformer. The second article presents an urban eco-district in Paris that is fed by the heat issued by a data center. The third article (Integrating objectives matching the ambitions, clear and on the long term) presents some recommendations from the French Renewable Energy Association (SER) towards a better energy valorization of residual wastes. The fourth article presents two examples of energy valorization of wastes in Brittany, one with the valorization of high-energy solid wastes for supplying heat to a milk farm and greenhouses, the other one concerns the development of a heat network supplied by an incineration plant, with a mix of energy sources such as wastes, wood and gas, and a special juridical scheme

The Impact of Microwave Penetration Depth on the Process of Heating the Moulding Sand with Sodium Silicate

Directory of Open Access Journals (Sweden)

Nowak D.

2017-12-01

Full Text Available This paper presents the impact of microwave penetration depth on the process of heating the moulding sand with sodium silicate. For each material it is affected by: the wavelength in vacuum and the real and imaginary components of the relative complex electrical permittivity εr for a selected measurement frequency. Since the components are not constant values and they change depending on the electrical parameters of materials and the frequency of the electromagnetic wave, it is indispensable to carry out laboratory measurements to determine them. Moreover, the electrical parameters of materials are also affected by: temperature, packing degree, humidity and conductivity. The measurements of the dielectric properties of moulding sand with sodium silicate was carried out using the perturbation method on a stand of waveguide resonance cavity. The real and imaginary components of the relative complex electrical permittivity was determined for moulding sand at various contents of sodium silicate and at various packing degrees of the samples. On the basis of the results the microwave penetration depth of moulding sand with sodium silicate was established. Relative literature contains no such data that would be essential to predicting an effective process of microwave heating of moulding sand with sodium silicate. Both the packing degree and the amount of sodium silicate in moulding sand turned out to affect the penetration depth, which directly translates into microwave power density distribution in the process of microwave heating of moulding sand with sodium silicate.

FEMALE FARMWORKERS’ PERCEPTIONS OF HEAT-RELATED ILLNESS AND PREGNANCY HEALTH

Science.gov (United States)

Flocks, Joan; Mac, Valerie Vi Thien; Runkle, Jennifer; Tovar-Aguilar, Jose Antonio; Economos, Jeannie; McCauley, Linda A.

2017-01-01

While agricultural workers have elevated risks of heat-related illnesses (HRI), pregnant farmworkers exposed to extreme heat face additional health risk, including poor pregnancy health and birth outcomes. Qualitative data from five focus groups with 35 female Hispanic and Haitian nursery and fernery workers provide details about the women’s perceptions of HRI and pregnancy. Participants believe that heat exposure can adversely affect general, pregnancy, and fetal health, yet feel they lack control over workplace conditions and that they lack training about these specific risks. These data are being used to develop culturally appropriate educational materials emphasizing health promoting and protective behaviors during pregnancy. PMID:24125050

Spreading Dynamics of an Ellipsoidal Drop Impacting on a Heated Substrate

Energy Technology Data Exchange (ETDEWEB)

Yun, Sungchan [Korea Nat’l. Univ. of Transportation, Chungju (Korea, Republic of)

2017-03-15

Unlike spherical drop impact, ellipsoidal drop impact can control the bouncing height on a heated surface by significantly altering impact behavior. To scrutinize the effect of the aspect ratio (AR) of the drop on the bounce suppression, in this study, non-axisymmetric spreading behaviors are observed from two side views and characterized based on the spreading width of the drop for horizontal principal axes. In addition, the maximum spreading width is investigated for various ARs. The results show that as the AR increases, the maximum spreading width of the minor axis increases, whereas that of the major axis shows no significant variation. In the regime of high AR and high impact velocity, liquid fragmentations by three parts are observed during bouncing. These fragmentations are discussed in this work. The hydrodynamic features of ellipsoidal drop impact will help understand bouncing control on non-wetting surfaces for several applications, such as self-cleaning and spray cooling.

Integrated assessment of pedestrian head impact protection in testing secondary safety and autonomous emergency braking.

Science.gov (United States)

Searson, D J; Anderson, R W G; Hutchinson, T P

2014-02-01

Pedestrian impact testing is used to provide information to the public about the relative level of protection provided by different vehicles to a struck pedestrian. Autonomous Emergency Braking (AEB) is a relatively new technology that aims to reduce the impact speed of such crashes. It is expected that vehicles with AEB will pose less harm to pedestrians, and that the benefit will come about through reductions in the number of collisions and a change in the severity of impacts that will still occur. In this paper, an integration of the assessment of AEB performance and impact performance is proposed based on average injury risk. Average injury risk is calculated using the result of an impact test and a previously published distribution of real world crash speeds. A second published speed distribution is used that accounts for the effects of AEB, and reduced average risks are implied. This principle allows the effects of AEB systems and secondary safety performance to be integrated into a single measure of safety. The results are used to examine the effect of AEB on Euro NCAP and ANCAP assessments using previously published results on the likely effect of AEB. The results show that, given certain assumptions about AEB performance, the addition of AEB is approximately the equivalent of increasing Euro NCAP test performance by one band, which corresponds to an increase in the score of 25% of the maximum. Copyright © 2013 Elsevier Ltd. All rights reserved.

Acclimatization to extreme heat

Science.gov (United States)

Warner, M. E.; Ganguly, A. R.; Bhatia, U.

2017-12-01

Heat extremes throughout the globe, as well as in the United States, are expected to increase. These heat extremes have been shown to impact human health, resulting in some of the highest levels of lives lost as compared with similar natural disasters. But in order to inform decision makers and best understand future mortality and morbidity, adaptation and mitigation must be considered. Defined as the ability for individuals or society to change behavior and/or adapt physiologically, acclimatization encompasses the gradual adaptation that occurs over time. Therefore, this research aims to account for acclimatization to extreme heat by using a hybrid methodology that incorporates future air conditioning use and installation patterns with future temperature-related time series data. While previous studies have not accounted for energy usage patterns and market saturation scenarios, we integrate such factors to compare the impact of air conditioning as a tool for acclimatization, with a particular emphasis on mortality within vulnerable communities.

Heat Pipes

Science.gov (United States)

1990-01-01

Bobs Candies, Inc. produces some 24 million pounds of candy a year, much of it 'Christmas candy.' To meet Christmas demand, it must produce year-round. Thousands of cases of candy must be stored a good part of the year in two huge warehouses. The candy is very sensitive to temperature. The warehouses must be maintained at temperatures of 78-80 degrees Fahrenheit with relative humidities of 38- 42 percent. Such precise climate control of enormous buildings can be very expensive. In 1985, energy costs for the single warehouse ran to more than 57,000 for the year. NASA and the Florida Solar Energy Center (FSEC) were adapting heat pipe technology to control humidity in building environments. The heat pipes handle the jobs of precooling and reheating without using energy. The company contacted a FSEC systems engineer and from that contact eventually emerged a cooperative test project to install a heat pipe system at Bobs' warehouses, operate it for a period of time to determine accurately the cost benefits, and gather data applicable to development of future heat pipe systems. Installation was completed in mid-1987 and data collection is still in progress. In 1989, total energy cost for two warehouses, with the heat pipes complementing the air conditioning system was 28,706, and that figures out to a cost reduction.

Continuous cooling transformation behavior and impact toughness in heat-affected zone of Nb-containing fire-resistant steel

Science.gov (United States)

Wang, Hong Hong; Qin, Zhan Peng; Wan, Xiang Liang; Wei, Ran; Wu, Kai Ming; Misra, Devesh

2017-09-01

Simulated heat-affected zone continuous cooling transformation diagram was developed for advanced fireresistant steel. Over a wide range of cooling rates, corresponding to t8/5 from 6 s to 150 s, granular bainite was the dominant transformation constituent, while the morphology of less dominant martensite-austenite (M-A) constituent changed from film-like to block-type constituent; but the hardness remained similar to the average value of 190-205 HV (0.2). The start and finish transformation temperature was high at 700 °C and 500 °C, and is different from the conventional high strength low alloy steels. It is believed that the high-content (0.09 wt%) of Nb may promote bainite transformation at relatively high temperatures. Martenistic matrix was not observed at high cooling rate and the film-like M-A constituent and blocky M-A constituent with thin film of retained austenite and lath martensite were observed on slow cooling. Excellent impact toughness was obtained in the heat-affected zone with 15-75 kJ/cm welding heat input.

At what level of heat load are age-related impairments in the ability to dissipate heat evident in females?

Directory of Open Access Journals (Sweden)

Jill M Stapleton

Full Text Available Studies have reported that older females have impaired heat loss responses during work in the heat compared to young females. However, it remains unclear at what level of heat stress these differences occur. Therefore, we examined whole-body heat loss [evaporative (HE and dry heat loss, via direct calorimetry] and changes in body heat storage (∆Hb, via direct and indirect calorimetry in 10 young (23±4 years and 10 older (58±5 years females matched for body surface area and aerobic fitness (VO2peak during three 30-min exercise bouts performed at incremental rates of metabolic heat production of 250 (Ex1, 325 (Ex2 and 400 (Ex3 W in the heat (40°C, 15% relative humidity. Exercise bouts were separated by 15 min of recovery. Since dry heat gain was similar between young and older females during exercise (p=0.52 and recovery (p=0.42, differences in whole-body heat loss were solely due to HE. Our results show that older females had a significantly lower HE at the end of Ex2 (young: 383±34 W; older: 343±39 W, p=0.04 and Ex3 (young: 437±36 W; older: 389±29 W, p=0.008, however no difference was measured at the end of Ex1 (p=0.24. Also, the magnitude of difference in the maximal level of HE achieved between the young and older females became greater with increasing heat loads (Ex1=10.2%, Ex2=11.6% and Ex3=12.4%. Furthermore, a significantly greater ∆Hb was measured for all heat loads for the older females (Ex1: 178±44 kJ; Ex2: 151±38 kJ; Ex3: 216±25 kJ, p=0.002 relative to the younger females (Ex1: 127±35 kJ; Ex2: 96±45 kJ; Ex3: 146±46 kJ. In contrast, no differences in HE or ∆Hb were observed during recovery (p>0.05. We show that older habitually active females have an impaired capacity to dissipate heat compared to young females during exercise-induced heat loads of ≥325 W when performed in the heat.

The Emergence of Public Relations in the Russian Federation.

Science.gov (United States)

Guth, David W.

2000-01-01

Describes the emergence of public relations in the Russian Federation over the past 7 years. Concludes that Russia is developing its own vision of public relations, similar in many aspects to that found in the West but also adapted to the harsh realities of Russian life. (NH)

Prepare for Diabetes Care in Heat and Emergencies

Science.gov (United States)

... directly on ice or on a gel pack. Heat can damage your blood sugar monitor, insulin pump, and other diabetes equipment. ... test strips. But don’t let the summer heat stop you from taking your ... need to be able to test your blood sugar and take steps if it’s too high ...

Performance of a passive emergency heat removal system of advanced reactors in two-phase flow and with high concentration of non-condensable

International Nuclear Information System (INIS)

Macedo, Luiz Alberto

2008-01-01

The research and the development of passive emergency cooling systems are necessary for the new generation of thermo-nuclear systems. Some basic information on the operation of these systems require the research of some relative processes to the natural circulation, mainly in conditions of two-phase flow involving processes of condensation in the presence of non-condensable gases, because many found situations are new. The experimental facility called Bancada de Circulacao Natural (BCN) was used for the realization of tests with diverse concentrations of non-condensable and power levels. The non-condensable gas present in the circuit decreases the rate of heat transfer for the secondary of the heat exchanger, determining low efficiency of the heat exchanger. High concentration of non-condensable in the vapor condensation, determines negative pressure, and cause the inversion of the flow in the circuit. The initial concentration of non-condensable and the geometry of the circuit, in the inlet of the heat exchanger, determines the establishment of transitory with two-phase flow. The BCN was performed with the computational code of Analysis of Accidents and Thermal-Hydraulics RELAP5/MOD 3.3 and, the calculated values had been compared with the experimental data, presenting good agreement for small non-condensable concentrations. The values calculated for high concentrations of non-condensable had been satisfactory after the circuit to have reached the temperature of saturation in the electric heater. (author)

Water tubing-related injuries treated in US emergency departments, 1991-2009.

Science.gov (United States)

Heinsimer, Kevin R; Nelson, Nicolas G; Roberts, Kristin J; McKenzie, Lara B

2013-02-01

The objective was to describe the patterns and mechanisms of water tubing-related injuries treated in U.S. emergency departments. The National Electronic Injury Surveillance System was used to examine cases of water tubing-related injuries. Sample weights were used to calculate national estimates of water tubing-related injuries. Analyses were conducted in 2010. From 1991-2009 an estimated 69,471 injuries were treated in US emergency departments for water tubing-related injuries. The annual number of cases increased 250% over the 19-year study period (P tubing-related injuries differ for children and adults. Research is needed to determine how best to reduce these injuries.

Nutrition and Supplementation Considerations to Limit Endotoxemia When Exercising in the Heat.

Science.gov (United States)

Guy, Joshua H; Vincent, Grace E

2018-02-06

Exercise-induced heat production is further elevated by exercise performed in hot conditions and this can subsequently impact inflammation, and gastrointestinal (GI) health. Implementing nutrition and supplementation strategies under these conditions may support the hyperthermic response, the systemic inflammatory response, GI permeability and integrity, and exercise performance. Therefore, the aim of this brief review is to explore athletes' inflammatory response of two key biomarkers, lipopolysaccharide (LPS), and interleukin-6 (IL-6), and provide nutrition and supplementation recommendations when exercising in hot conditions. There is emerging evidence that probiotics, glutamine, and vitamin C can preserve GI integrity, which may improve performance during exercise in the heat. Glucose rich food when consumed with water, before and during exercise in the heat, also appear to limit endotoxemia, preserve GI integrity, and reduce the incidence of GI disturbances compared with water alone. The use of non-steroidal anti-inflammatory drugs (NSAIDs) may compromise GI integrity and this may result in greater leakage of endotoxins during long duration exercise in the heat. Further work is required to elucidate the impact of nutrition and supplementation strategies, in particular the use of NSAIDs, when exercising in the heat.

Nutrition and Supplementation Considerations to Limit Endotoxemia When Exercising in the Heat

Directory of Open Access Journals (Sweden)

Joshua H. Guy

2018-02-01

Full Text Available Exercise-induced heat production is further elevated by exercise performed in hot conditions and this can subsequently impact inflammation, and gastrointestinal (GI health. Implementing nutrition and supplementation strategies under these conditions may support the hyperthermic response, the systemic inflammatory response, GI permeability and integrity, and exercise performance. Therefore, the aim of this brief review is to explore athletes’ inflammatory response of two key biomarkers, lipopolysaccharide (LPS, and interleukin-6 (IL-6, and provide nutrition and supplementation recommendations when exercising in hot conditions. There is emerging evidence that probiotics, glutamine, and vitamin C can preserve GI integrity, which may improve performance during exercise in the heat. Glucose rich food when consumed with water, before and during exercise in the heat, also appear to limit endotoxemia, preserve GI integrity, and reduce the incidence of GI disturbances compared with water alone. The use of non-steroidal anti-inflammatory drugs (NSAIDs may compromise GI integrity and this may result in greater leakage of endotoxins during long duration exercise in the heat. Further work is required to elucidate the impact of nutrition and supplementation strategies, in particular the use of NSAIDs, when exercising in the heat.

Heat exchanger design considerations for high temperature gas-cooled reactor (HTGR) plants

International Nuclear Information System (INIS)

McDonald, C.F.; Vrable, D.L.; Van Hagan, T.H.; King, J.H.; Spring, A.H.

1980-02-01

Various aspects of the high-temperature heat exchanger conceptual designs for the gas turbine (HTGR-GT) and process heat (HTGR-PH) plants are discussed. Topics include technology background, heat exchanger types, surface geometry, thermal sizing, performance, material selection, mechanical design, fabrication, and the systems-related impact of installation and integration of the units in the prestressed concrete reactor vessel. The impact of future technology developments, such as the utilization of nonmetallic materials and advanced heat exchanger surface geometries and methods of construction, is also discussed

Impact of Cattaneo-Christov Heat Flux in Jeffrey Fluid Flow with Homogeneous-Heterogeneous Reactions.

Directory of Open Access Journals (Sweden)

Tasawar Hayat

Full Text Available Two-dimensional stretched flow of Jeffrey fluid in view of Cattaneo-Christov heat flux is addressed. Effects of homogeneous-heterogeneous reactions are also considered. Suitable transformations are used to form ordinary differential equations. Convergent series solutions are computed. Impact of significant parameters on the velocity, temperature, concentration and skin friction coefficient is addressed. Analysis of thermal relaxation is made. The obtained results show that ratio of relaxation to retardation times and Deborah number have inverse relation for velocity profile. Temperature distribution has decreasing behavior for Prandtl number and thermal relaxation time. Also concentration decreases for larger values of strength of homogeneous reaction parameter while it increases for strength of heterogeneous reaction parameter.

Impact of Cattaneo-Christov Heat Flux in Jeffrey Fluid Flow with Homogeneous-Heterogeneous Reactions.

Science.gov (United States)

Hayat, Tasawar; Qayyum, Sumaira; Imtiaz, Maria; Alsaedi, Ahmed

2016-01-01

Two-dimensional stretched flow of Jeffrey fluid in view of Cattaneo-Christov heat flux is addressed. Effects of homogeneous-heterogeneous reactions are also considered. Suitable transformations are used to form ordinary differential equations. Convergent series solutions are computed. Impact of significant parameters on the velocity, temperature, concentration and skin friction coefficient is addressed. Analysis of thermal relaxation is made. The obtained results show that ratio of relaxation to retardation times and Deborah number have inverse relation for velocity profile. Temperature distribution has decreasing behavior for Prandtl number and thermal relaxation time. Also concentration decreases for larger values of strength of homogeneous reaction parameter while it increases for strength of heterogeneous reaction parameter.

Age-related macular degeneration—emerging pathogenetic and therapeutic concepts

Science.gov (United States)

GEHRS, KAREN M.; ANDERSON, DON H.; JOHNSON, LINCOLN V.; HAGEMAN, GREGORY S.

2014-01-01

Today, the average life expectancy in developed nations is over 80 years and climbing. And yet, the quality of life during those additional years is often significantly diminished by the effects of age-related, degenerative diseases, including age-related macular degeneration (AMD), the leading cause of blindness in the elderly worldwide. AMD is characterized by a progressive loss of central vision attributable to degenerative and neovascular changes in the macula, a highly specialized region of the ocular retina responsible for fine visual acuity. Estimates gathered from the most recent World Health Organization (WHO) global eye disease survey conservatively indicate that 14 million persons are blind or severely visually impaired because of AMD. The disease has a tremendous impact on the physical and mental health of the geriatric population and their families and is becoming a major public health burden. Currently, there is neither a cure nor a means to prevent AMD. Palliative treatment options for the less prevalent, late-stage ‘wet’ form of the disease include anti-neovascular agents, photodynamic therapy and thermal laser. There are no current therapies for the more common ‘dry’ AMD, except for the use of antioxidants that delay progression in 20%–25% of eyes. New discoveries, however, are beginning to provide a much clearer picture of the relevant cellular events, genetic factors, and biochemical processes associated with early AMD. Recently, compelling evidence has emerged that the innate immune system and, more specifically, uncontrolled regulation of the complement alternative pathway plays a central role in the pathobiology of AMD. The complement Factor H gene—which encodes the major inhibitor of the complement alternative pathway—is the first gene identified in multiple independent studies that confers a significant genetic risk for the development of AMD. The emergence of this new paradigm of AMD pathogenesis should hasten the development

The social media manifesto: a comprehensive review of the impact of social media on emergency management.

Science.gov (United States)

Crowe, Adam

2011-02-01

Over the past five years, social media have impacted emergency management and disaster response in numerous ways. The emergency management professional must begin to accept this impact not as an arbitrary consequence of an uncontrolled disaster, but rather as a tool to help coordinate, manage and facilitate a safe and expected response during emergencies and disasters. This paper will explain the power and purpose of social media as well as how social media systems have equalised capabilities for all levels and sizes of government. Moreover, this paper will also highlight the social media systems that are being used as operational tools as well as what the future holds. Lastly, common implementation challenges will be discussed through a look at systematic approaches to applying social media in emergency management as a positive and valuable tool.

Multi-scale modeling of the environmental impact and energy performance of open-loop groundwater heat pumps in urban areas

International Nuclear Information System (INIS)

Sciacovelli, A.; Guelpa, E.; Verda, V.

2014-01-01

Groundwater heat pumps are expected to play a major role in future energy scenarios. Proliferation of such systems in urban areas may generate issues related to possible interference between installations. These issues are associated with the thermal plume produced by heat pumps during operation and are particularly evident in the case of groundwater flow, because of the advection heat transfer. In this paper, the impact of an installation is investigated through a thermo-fluid dynamic model of the subsurface which considers fluid flow in the saturated unit and heat transfer in both the saturated and unsaturated units. Due to the large extension of the affected area, a multiscale numerical model that combines a three-dimensional CFD model and a network model is proposed. The thermal request of the user and the heat pump performances are considered in the multi-scale numerical model through appropriate boundary conditions imposed at the wells. Various scenarios corresponding to different operating modes of the heat pump are considered. - Highlights: • A groundwater heat pump of a skyscraper under construction is considered. • The thermal plume induced in the groundwater is evaluated using a multi-scale model. • The multi-scale model is constituted by a full 3D model and a network model. • Multi-scale permits to study large space for long time with low computational costs. • In some cases thermal plume can reduce the COP of other heat pumps of 20%

Social Interventions to Prevent Heat-Related Mortality in the Older Adult in Rome, Italy: A Quasi-Experimental Study

Science.gov (United States)

Inzerilli, Maria Chiara; Palombi, Leonardo; Madaro, Olga; Betti, Daniela; Marazzi, Maria Cristina

2018-01-01

This study focuses on the impact of a program aimed at reducing heat-related mortality among older adults residing in central Rome by counteracting social isolation. The mortality of citizens over the age of 75 living in three Urban Areas (UAs) located in central Rome is compared with that of the residents of four adjacent UAs during the summer of 2015. The data, broken down by UA, were provided by the Statistical Office of the Municipality of Rome, which gathers them on a routine basis. During the summer of 2015, 167 deaths were recorded in those UAs in which the Long Live the Elderly (LLE) program was active and 169 in those in which it was not, implying cumulative mortality rates of 25‰ (SD ± 1.4; Cl 95%: 23–29) and 29‰ (SD ± 6.7; Cl 95%: 17–43), respectively. Relative to the summer of 2014, the increase of deaths during the summer of 2015 was greater in UAs in which the LLE program had not been implemented (+97.3% vs. +48.8%). In conclusion, the paper shows the impact of a community-based active monitoring program, focused on strengthening individual relationship networks and the social capital of the community, on mortality in those over 75 during heat waves. PMID:29641436

The dark-baryonic matter mass relation for observational verification in Verlinde's emergent gravity

Science.gov (United States)

Shen, Jian Qi

2018-06-01

Recently, a new interesting idea of origin of gravity has been developed by Verlinde. In this scheme of emergent gravity, where horizon entropy, microscopic de Sitter states and relevant contribution to gravity are involved, an entropy displacement resulting from matter behaves as a memory effect and can be exhibited at sub-Hubble scales, namely, the entropy displacement and its "elastic" response would lead to emergent gravity, which gives rise to an extra gravitational force. Then galactic dark matter effects may origin from such extra emergent gravity. We discuss some concepts in Verlinde's theory of emergent gravity and point out some possible problems or issues, e.g., the gravitational potential caused by Verlinde's emergent apparent dark matter may no longer be continuous in spatial distribution at ordinary matter boundary (such as a massive sphere surface). In order to avoid the unnatural discontinuity of the extra emergent gravity of Verlinde's apparent dark matter, we suggest a modified dark-baryonic mass relation (a formula relating Verlinde's apparent dark matter mass to ordinary baryonic matter mass) within this framework of emergent gravity. The modified mass relation is consistent with Verlinde's result at relatively small scales (e.g., R3h_{70}^{-1} Mpc), the modified dark-baryonic mass relation presented here might be in better agreement with the experimental curves of weak lensing analysis in the recent work of Brouwer et al. Galactic rotation curves are compared between Verlinde's emergent gravity and McGaugh's recent model of MOND (Modified Newtonian Dynamics established based on recent galaxy observations). It can be found that Verlinde rotational curves deviate far from those of McGaugh MOND model when the MOND effect (or emergent dark matter) dominates. Some applications of the modified dark-baryonic mass relation inspired by Verlinde's emergent gravity will be addressed for galactic and solar scales. Potential possibilities to test this dark

Environmental impact of emissions from incineration plants in comparison to typical heating systems

Science.gov (United States)

Wielgosiński, Grzegorz; Namiecińska, Olga; Czerwińska, Justyna

2018-01-01

In recent years, five modern municipal waste incineration plants have been built in Poland. Next ones are being constructed and at the same time building of several others is being considered. Despite positive experience with the operation of the existing installations, each project of building a new incinerator raises a lot of emotions and social protests. The main argument against construction of an incineration plant is the emission of pollutants. The work compares emissions from municipal waste incineration plants with those from typical heating plants: in the first part, for comparison large heating plants equipped with pulverized coal-fired boilers (OP-140), stoker-fired boilers (three OR-32 boilers) or gas blocks with heat output of about 100 MW have been selected, while the second part compares WR-10 and WR-25 stoker-fired boilers most popular in our heating industry with thermal treatment systems for municipal waste or refuse-derived-fuel (RDF) with similar heat output. Both absolute emission and impact - immission of pollutants in vicinity of the plant were analyzed.

Environmental impact of emissions from incineration plants in comparison to typical heating systems

Directory of Open Access Journals (Sweden)

Wielgosiński Grzegorz

2018-01-01

Full Text Available In recent years, five modern municipal waste incineration plants have been built in Poland. Next ones are being constructed and at the same time building of several others is being considered. Despite positive experience with the operation of the existing installations, each project of building a new incinerator raises a lot of emotions and social protests. The main argument against construction of an incineration plant is the emission of pollutants. The work compares emissions from municipal waste incineration plants with those from typical heating plants: in the first part, for comparison large heating plants equipped with pulverized coal-fired boilers (OP-140, stoker-fired boilers (three OR-32 boilers or gas blocks with heat output of about 100 MW have been selected, while the second part compares WR-10 and WR-25 stoker-fired boilers most popular in our heating industry with thermal treatment systems for municipal waste or refuse-derived-fuel (RDF with similar heat output. Both absolute emission and impact - immission of pollutants in vicinity of the plant were analyzed.

The impact of short-term heat storage on the ice-albedo feedback loop

Science.gov (United States)

Polashenski, C.; Wright, N.; Perovich, D. K.; Song, A.; Deeb, E. J.

2016-12-01

The partitioning of solar energy in the ice-ocean-atmosphere environment is a powerful control over Arctic sea ice mass balance. Ongoing transitions of the sea ice toward a younger, thinner state are enhancing absorption of solar energy and contributing to further declines in sea ice in a classic ice-albedo feedback. Here we investigate the solar energy balance over shorter timescales. In particular, we are concerned with short term delays in the transfer of absorbed solar energy to the ice caused by heat storage in the upper ocean. By delaying the realization of ice melt, and hence albedo decline, heat storage processes effectively retard the intra-season ice-albedo feedback. We seek to quantify the impact and variability of such intra-season storage delays on full season energy absorption. We use in-situ data collected from Arctic Observing Network (AON) sea ice sites, synthesized with the results of imagery processed from high resolution optical satellites, and basin-scale remote sensing products to approach the topic. AON buoys are used to monitor the storage and flux of heat, while satellite imagery allows us to quantify the evolution of surrounding ice conditions and predict the aggregate scale solar absorption. We use several test sites as illustrative cases and demonstrate that temporary heat storage can have substantial impacts on seasonal energy absorption and ice loss. A companion to this work is presented by N. Wright at this meeting.

Occupational Heat Stress Profiles in Selected Workplaces in India.

Science.gov (United States)

Venugopal, Vidhya; Chinnadurai, Jeremiah S; Lucas, Rebekah A I; Kjellstrom, Tord

2015-12-29

Health and productivity impacts from occupational heat stress have significant ramifications for the large workforce of India. This study profiled occupational heat stress impacts on the health and productivity of workers in select organized and unorganized Indian work sectors. During hotter and cooler seasons, Wet Bulb Globe Temperatures (WBGT) were used to quantify the risk of heat stress, according to International workplace guidelines. Questionnaires assessed workers' perceived health and productivity impacts from heat stress. A total of 442 workers from 18 Indian workplaces participated (22% and 78% from the organized and unorganized sector, respectively). Overall 82% and 42% of workers were exposed to higher than recommended WBGT during hotter and cooler periods, respectively. Workers with heavy workloads reported more heat-related health issues (chi square = 23.67, p ≤ 0.001) and reduced productivity (chi square = 15.82, p ≤ 0.001), especially the outdoor workers. Heat-rashes, dehydration, heat-syncope and urinogenital symptoms were self-reported health issues. Cited reasons for productivity losses were: extended-work hours due to fatigue/exhaustion, sickness/hospitalization and wages lost. Reducing workplace heat stress will benefit industries and workers via improving worker health and productivity. Adaptation and mitigation measures to tackle heat stress are imperative to protect the present and future workforce as climate change progresses.

Occupational Heat Stress Profiles in Selected Workplaces in India

Science.gov (United States)

Venugopal, Vidhya; Chinnadurai, Jeremiah S.; Lucas, Rebekah A. I.; Kjellstrom, Tord

2015-01-01

Health and productivity impacts from occupational heat stress have significant ramifications for the large workforce of India. This study profiled occupational heat stress impacts on the health and productivity of workers in select organized and unorganized Indian work sectors. During hotter and cooler seasons, Wet Bulb Globe Temperatures (WBGT) were used to quantify the risk of heat stress, according to International workplace guidelines. Questionnaires assessed workers’ perceived health and productivity impacts from heat stress. A total of 442 workers from 18 Indian workplaces participated (22% and 78% from the organized and unorganized sector, respectively). Overall 82% and 42% of workers were exposed to higher than recommended WBGT during hotter and cooler periods, respectively. Workers with heavy workloads reported more heat-related health issues (chi square = 23.67, p ≤ 0.001) and reduced productivity (chi square = 15.82, p ≤ 0.001), especially the outdoor workers. Heat-rashes, dehydration, heat-syncope and urinogenital symptoms were self-reported health issues. Cited reasons for productivity losses were: extended-work hours due to fatigue/exhaustion, sickness/hospitalization and wages lost. Reducing workplace heat stress will benefit industries and workers via improving worker health and productivity. Adaptation and mitigation measures to tackle heat stress are imperative to protect the present and future workforce as climate change progresses. PMID:26729144

Reliability analysis of emergency decay heat removal system of nuclear ship under various accident conditions

International Nuclear Information System (INIS)

Matsuoka, Takeshi

1984-01-01

A reliability analysis is given for the emergency decay heat removal system of the Nuclear Ship ''Mutsu'' and the emergency sea water cooling system of the Nuclear Ship ''Savannah'', under ten typical nuclear ship accident conditions. Basic event probabilities under these accident conditions are estimated from literature survey. These systems of Mutsu and Savannah have almost the same reliability under the normal condition. The dispersive arrangement of a system is useful to prevent the reduction of the system reliability under the condition of an accident restricted in one room. As for the reliability of these two systems under various accident conditions, it is seen that the configuration and the environmental condition of a system are two main factors which determine the reliability of the system. Furthermore, it was found that, for the evaluation of the effectiveness of safety system of a nuclear ship, it is necessary to evaluate its reliability under various accident conditions. (author)

Energy Savings and Breakeven Costs for Residential Heat Pump Water Heaters in the United States

Energy Technology Data Exchange (ETDEWEB)

Maguire, Jeff [National Renewable Energy Lab. (NREL), Golden, CO (United States); Burch, Jay [National Renewable Energy Lab. (NREL), Golden, CO (United States); Merrigan, Tim [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ong, Sean [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2013-07-01

Heat pump water heaters (HPWHs) have recently re-emerged in the U.S. residential water heating market and have the potential to provide homeowners with significant energy savings. However, there are questions as to the actual performance and energy savings potential of these units, in particular in regards to the heat pump's performance in unconditioned space and the impact of the heat pump on space heating and cooling loads when it is located in conditioned space. To help answer these questions, NREL performed simulations of a HPWH in both conditioned and unconditioned space at over 900 locations across the continental United States and Hawaii. Simulations included a Building America benchmark home so that any interaction between the HPWH and the home's HVAC equipment could be captured. Comparisons were performed to typical gas and electric water heaters to determine the energy savings potential and cost effectiveness of a HPWH relative to these technologies. HPWHs were found to have a significant source energy savings potential when replacing typical electric water heaters, but only saved source energy relative to gas water heater in the most favorable installation locations in the southern United States. When replacing an electric water heater, the HPWH is likely to break even in California, the southern United States, and parts of the northeast in most situations. However, the HPWH will only break even when replacing a gas water heater in a few southern states.

Quantifying trends in disease impact to produce a consistent and reproducible definition of an emerging infectious disease.

Science.gov (United States)

Funk, Sebastian; Bogich, Tiffany L; Jones, Kate E; Kilpatrick, A Marm; Daszak, Peter

2013-01-01

The proper allocation of public health resources for research and control requires quantification of both a disease's current burden and the trend in its impact. Infectious diseases that have been labeled as "emerging infectious diseases" (EIDs) have received heightened scientific and public attention and resources. However, the label 'emerging' is rarely backed by quantitative analysis and is often used subjectively. This can lead to over-allocation of resources to diseases that are incorrectly labelled "emerging," and insufficient allocation of resources to diseases for which evidence of an increasing or high sustained impact is strong. We suggest a simple quantitative approach, segmented regression, to characterize the trends and emergence of diseases. Segmented regression identifies one or more trends in a time series and determines the most statistically parsimonious split(s) (or joinpoints) in the time series. These joinpoints in the time series indicate time points when a change in trend occurred and may identify periods in which drivers of disease impact change. We illustrate the method by analyzing temporal patterns in incidence data for twelve diseases. This approach provides a way to classify a disease as currently emerging, re-emerging, receding, or stable based on temporal trends, as well as to pinpoint the time when the change in these trends happened. We argue that quantitative approaches to defining emergence based on the trend in impact of a disease can, with appropriate context, be used to prioritize resources for research and control. Implementing this more rigorous definition of an EID will require buy-in and enforcement from scientists, policy makers, peer reviewers and journal editors, but has the potential to improve resource allocation for global health.

Improvement of impact toughness by modified hot working and heat treatment in 13%Cr martensitic stainless steel

Energy Technology Data Exchange (ETDEWEB)

Srivatsa, Kulkarni, E-mail: srivatsa.kulkarni@kcssl.com; Srinivas, Perla; Balachandran, G.; Balasubramanian, V.

2016-11-20

Improvement of the general mechanical properties and in particular sub-zero impact toughness in a 0.2%C-13%Cr martensitic stainless steel has been explored by varying the hot deformation and heat treatment conditions. The deformation conditions include hot rolling an ingot in one case and cogging the ingot to a semis followed by hot rolling in another case. The bars made from both routes were subjected to a single hardening heat treatment at 980 °C and 1040 °C oil quenched and a double hardening heat treatment at 1040 °C followed by 980 °C oil quenched. The hardened steels were subjected to a standard two stage tempering at 710 °C followed by 680 °C. The impact toughness was found to be doubled in the cogged and rolled steel in double hardened condition. Other processing conditions show varying impact toughness levels. The toughness observed was correlated to the grain size and the carbide distribution in the matrix and the fractography features.

heat-induced biological changes as heat tolerance indices related to growth performance in buffaloes

International Nuclear Information System (INIS)

Kaldes, M.Z.N.

2004-01-01

the main objective of this study was to predict new heat tolerance indices related to hot summer growth performance, depending on heat - induced changes in some physiological and biochemical parameters of young water buffalo calves. the present study was carried out on 8 egyptian male buffalo calves of 6 months old and 106.8 kg mean body weight (B W), and on the same animals of 12 months old and 179.5 kg mean B W. the animals were maintained in a climatic chamber of the egyptian atomic energy authority. the animals were maintained in metabolic cages inside a climatic chamber for 3 weeks under mild climate (20-24 c and 50-60% Rh, equivalent to 62-72 THI) for 6 hours daily as adjustment period,followed by 5 and 7 days in the 6- and 12-month old calves, respectively at the same climatic conditions as a control period.this was followed by 6 hours of acute heat exposure period (33-43 c and 40-60% Rh, equivalent to 85-93 Thi), then by chronic heat exposure period of the same climatic conditions for 5 and 7 days in the 6- and 12- month old calves, respectively.Rectal temperature (RT) and respiration rate (RR) were estimated daily, whereas BW was estimated at the beginning and the end of each exposure period

On the Operator ⨁Bk Related to Bessel Heat Equation

Directory of Open Access Journals (Sweden)

Wanchak Satsanit

2010-01-01

Full Text Available We study the equation (∂/∂tu(x,t=c2⊕Bku(x,t with the initial condition u(x,0=f(x for x∈Rn+. The operator ⊕Bk is the operator iterated k-times and is defined by ⊕Bk=((∑i=1pBxi4-(∑j=p+1p+qBxi4k, where p+q=n is the dimension of the Rn+, Bxi=∂2/∂xi2+(2vi/xi(∂/∂xi, 2vi=2αi+1, αi>-1/2, i=1,2,3,…,n, and k is a nonnegative integer, u(x,t is an unknown function for (x,t=(x1,x2,…,xn,t∈Rn+×(0,∞, f(x is a given generalized function, and c is a positive constant. We obtain the solution of such equation, which is related to the spectrum and the kernel, which is so called Bessel heat kernel. Moreover, such Bessel heat kernel has interesting properties and also related to the kernel of an extension of the heat equation.

EPA activities related to emerging air sensor technology

Science.gov (United States)

This slide set was developed through contributions of NERL and NRMRL research groups and organized to explain the diversity of ongoing research related to emerging air sensor technology for an international audience. Gayle will be walking OAQPS through the slide set in advance o...

Off-site relations and emergency planning or the importance of being earnest

International Nuclear Information System (INIS)

Dunkle, M.K.

1987-01-01

Emergency planning is and will continue to be a vulnerable spot for the nuclear industry. Emergency planning issues can be reopened at any time during the life of the plant and this represents a threat that continues for the life of the plant. The area of planning in which utilities find themselves most vulnerable is off-site relations with the state and local government officials, the public, and even the news media. Utilities face two very basic challenges in developing and maintaining good off-site relations for emergency preparedness: (1) utility managers must understand and be capable of working with the myriad of personalities and dynamics in the emergency preparedness arena. (2) Emergency preparedness is an emotional issue and a technical subject not well understood by the average citizen. The public looks to well-founded emergency plans and strong leaders to effect them. With these, a sound communications strategy, and a good plant record, a utility stands a chance of achieving the real key to success, credibility

Devolution's policy impact on non-emergency medical transportation in State Children's Health Insurance Programs.

Science.gov (United States)

Borders, Stephen; Blakely, Craig; Ponder, Linda; Raphael, David

2011-01-01

Proponents of devolution often maintain that the transfer of power and authority of programs enables local officials to craft policy solutions that better align with the needs of their constituents. This article provides one of the first empirical evaluations of this assumption as it relates to non-emergency medical transportation (NEMT) in the State Children's Health Insurance Program (SCHIP). NEMT programs meet a critical need in the areas in which they serve, directly targeting this single key access barrier to care. Yet states have great latitude in making such services available. The authors utilize data from 32 states to provide a preliminary assessment of devolution's consequences and policy impact on transportation-related access to care. Their findings provide mixed evidence on devolution's impact on policy outcomes. Proponents of devolution can find solace in the fact that several states have gone beyond federally mandated minimum requirements to offer innovative programs to remove transportation barriers to care. Detractors of devolution will find continued pause on several key issues, as a number of states do not offer NEMT to their SCHIP populations while cutting services and leaving over $7 billion in federal matching funding unspent.

Spoilt for choice. Environmental impacts of heating systems; Die Qual der Wahl. Umweltwirkung von Heizungssystemen

Energy Technology Data Exchange (ETDEWEB)

Bettgenhaeuser, Kjell; Boermans, Thomas [Ecofys Germany GmbH, Koeln (Germany)

2011-07-01

Especially for retrofitting of old buildings or for new construction measures, building owners and investors are hard pressed in choosing the appropriate heating system. On behalf of the Federal Environment Agency (Dessau-Rosslau, Federal Republic of Germany), Ecofys Germany GmbH (Cologne, Federal Republic of Germany) performed a comparative study on heating systems. The comparative study presents considerable differences in environmental impacts and cost effectiveness.

Heat pump and PV impact on residential low-voltage distribution grids as a function of building and district properties

International Nuclear Information System (INIS)

Protopapadaki, Christina; Saelens, Dirk

2017-01-01

Highlights: • Comprehensive method includes variability in building and feeder characteristics. • Detailed, 10-min, Modelica-based simulation of buildings, heat pumps and networks. • Overloading and voltage issues appear from 30% heat pumps in rural Belgian feeders. • Analysis of load profiles reveals great impact of heat pump back-up heaters. • High correlation of building neighborhood properties with grid impact indicators. - Abstract: Heating electrification powered by distributed renewable energy generation is considered among potential solutions towards mitigation of greenhouse gas emissions. Roadmaps propose a wide deployment of heat pumps and photovoltaics in the residential sector. Since current distribution grids are not designed to accommodate these loads, potential benefits of such policies might be compromised. However, in large-scale analyses, often grid constraints are neglected. On the other hand, grid impact of heat pumps and photovoltaics has been investigated without considering the influence of building characteristics. This paper aims to assess and quantify in a probabilistic way the impact of these technologies on the low-voltage distribution grid, as a function of building and district properties. The Monte Carlo approach is used to simulate an assortment of Belgian residential feeders, with varying size, cable type, heat pump and PV penetration rates, and buildings of different geometry and insulation quality. Modelica-based models simulate the dynamic behavior of both buildings and heating systems, as well as three-phase unbalanced loading of the network. Additionally, stochastic occupant behavior is taken into account. Analysis of neighborhood load profiles puts into perspective the importance of demand diversity in terms of building characteristics and load simultaneity, highlighting the crucial role of back-up electrical loads. It is shown that air-source heat pumps have a greater impact on the studied feeders than PV, in terms

Public crowdsensing of heat waves by social media data

Science.gov (United States)

Grasso, Valentina; Crisci, Alfonso; Morabito, Marco; Nesi, Paolo; Pantaleo, Gianni

2017-07-01

Investigating on society-related heat wave hazards is a global issue concerning the people health. In the last two decades, Europe experienced several severe heat wave episodes with catastrophic effects in term of human mortality (2003, 2010 and 2015). Recent climate investigations confirm that this threat will represent a key issue for the resiliency of urban communities in next decades. Several important mitigation actions (Heat-Health Action Plans) against heat hazards have been already implemented in some WHO (World Health Organization) European region member states to encourage preparedness and response to extreme heat events. Nowadays, social media (SM) offer new opportunities to indirectly measure the impact of heat waves on society. Using the crowdsensing concept, a micro-blogging platform like Twitter may be used as a distributed network of mobile sensors that react to external events by exchanging messages (tweets). This work presents a preliminary analysis of tweets related to heat waves that occurred in Italy in summer 2015. Using TwitterVigilance dashboard, developed by the University of Florence, a sample of tweets related to heat conditions was retrieved, stored and analyzed for main features. Significant associations between the daily increase in tweets and extreme temperatures were presented. The daily volume of Twitter users and messages revealed to be a valuable indicator of heat wave impact at the local level, in urban areas. Furthermore, with the help of Generalized Additive Model (GAM), the volume of tweets in certain locations has been used to estimate thresholds of local discomfort conditions. These city-specific thresholds are the result of dissimilar climatic conditions and risk cultures.

Entransy analysis of irreversible heat pump using Newton and Dulong–Petit heat transfer laws and relations with its performance

International Nuclear Information System (INIS)

Açıkkalp, Emin