Terrestrial Analogs for Surface Properties Associated with Impact Cratering on the Moon - Self-secondary Impact Features at Kings Bowl, Idaho

Science.gov (United States)

Matiella Novak, M. A.; Zanetti, M.; Neish, C.; Kukko, A.; Fan, K.; Heldmann, J.; Hughes, S. S.

2017-12-01

The Kings Bowl (KB) eruptive fissure and lava field, located in the southern end of Craters of the Moon National Monument, Idaho, is an ideal location for planetary analogue field studies of surface properties related to volcanic and impact processes. Here we look at possible impact features present in the KB lava field near the main vent that resulted in squeeze-ups of molten lava from beneath a semi-solid lava lake crust. These may have been caused by the ejection of blocks during the phreatic eruption that formed the Kings Bowl pit, and their subsequent impact into a partially solidified lava pond. We compare and contrast these features with analogous self-secondary impact features, such as irregular, rimless secondary craters ("splash craters") observed in lunar impact melt deposits, to better understand how self-secondary impacts determine the surface properties of volcanic and impact crater terrains. We do this by analyzing field measurements of these features, as well as high-resolution DEM data collected through the Kinematic LiDAR System (KLS), both of which give us feature dimensions and distributions. We then compare these data with self-secondary impact features on the Moon and related surface roughness constrained through Lunar Reconnaissance Orbiter observations (Mini-RF and LROC NACs). Possible self-secondary impact features can be found in association with many lunar impact craters. These are formed when ballistic ejecta from the crater falls onto the ejecta blanket and melt surrounding the newly formed crater. Self-secondary impact features involving impact melt deposits are particularly useful to study because the visibly smooth melt texture serves to highlight the impact points in spacecraft imagery. The unusual morphology of some of these features imply that they formed when the melt had not yet completely solidified, strongly suggesting a source of impactors from the primary crater itself. We will also discuss ongoing efforts to integrate field

Final Documentation: Incident Management And Probabilities Courses of action Tool (IMPACT).

Energy Technology Data Exchange (ETDEWEB)

Edwards, Donna M.; Ray, Jaideep; Tucker, Mark D.; Whetzel, Jonathan; Cauthen, Katherine Regina

2018-03-01

This report pulls together the documentation produced for the IMPACT tool, a software-based decision support tool that provides situational awareness, incident characterization, and guidance on public health and environmental response strategies for an unfolding bio-terrorism incident.

General document environmental impact report (m.e.r.) oil and gas exploitation industry. Update and supplement of the general document; Generiek document m.e.r. offshore olie- en gaswinningsindustrie. Update en aanvulling van het generiek document environmental impact report (m.e.r.) offshore, 1999

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-04-15

The generic environmental impact assessment (EIA or MER in Dutch) in 1999 is intended to serve as a template for specific environmental impact assessments for oil and gas exploitation projects at sea. Since 1999, a number of innovations and changes were implemented. Particularly in offshore technologies and regulations new insights and ideas came up in recent years. Therefore the existing generic document has to be updated with new information, relevant in the preparation of specific environmental impact assessments in the offshore oil and gas exploitation industry in the Dutch part of the Continental Shelf [Dutch] De generieke milieu effect rapportage (MER) uit 1999 is bedoeld om te dienen als een sjabloon voor specifieke Milieueffectrapportages bij olie- en gaswinningprojecten op zee. Sinds 1999 is een aantal vernieuwingen en veranderingen doorgevoerd. Met name in offshore technologieen en wet- en regelgeving zijn de afgelopen jaren nieuwe inzichten en ideeen ontstaan. Hierdoor is de wens ontstaan om het bestaande generieke document aan te vullen met nieuwe informatie die relevant is voor het opstellen van specifieke Milieueffectrapportages in de offshore olie- en gaswinningsindustrie op het Nederlands deel van het Continentaal Plat.

Assessment of impact on seafloor features in INDEX area

Digital Repository Service at National Institute of Oceanography (India)

Sharma, R.

Benthic disturbance,environmental impact,photographic and subbottomdata,seafloor features. Imaging and sounding techniques are effective tools for obtaining first-hand information forassessing the baseline (undisturbed) conditions as well as the impact (disturbed...) conditions onthe seabed,to evaluate the extent and type of efects on the physical environment on the seafloor. This information is also useful for planning the locations and areas for sampling instudies to ases the impact on different parameters.Information...

Classification of protein-protein interaction full-text documents using text and citation network features.

Science.gov (United States)

Kolchinsky, Artemy; Abi-Haidar, Alaa; Kaur, Jasleen; Hamed, Ahmed Abdeen; Rocha, Luis M

2010-01-01

We participated (as Team 9) in the Article Classification Task of the Biocreative II.5 Challenge: binary classification of full-text documents relevant for protein-protein interaction. We used two distinct classifiers for the online and offline challenges: 1) the lightweight Variable Trigonometric Threshold (VTT) linear classifier we successfully introduced in BioCreative 2 for binary classification of abstracts and 2) a novel Naive Bayes classifier using features from the citation network of the relevant literature. We supplemented the supplied training data with full-text documents from the MIPS database. The lightweight VTT classifier was very competitive in this new full-text scenario: it was a top-performing submission in this task, taking into account the rank product of the Area Under the interpolated precision and recall Curve, Accuracy, Balanced F-Score, and Matthew's Correlation Coefficient performance measures. The novel citation network classifier for the biomedical text mining domain, while not a top performing classifier in the challenge, performed above the central tendency of all submissions, and therefore indicates a promising new avenue to investigate further in bibliome informatics.

WIPP documentation plan

International Nuclear Information System (INIS)

Plung, D.L.; Montgomery, T.T.; Glasstetter, S.R.

1986-01-01

In support of the programs at the Waste Isolation Pilot Plant (WIPP), the Publications and Procedures Section developed a documentation plan that provides an integrated document hierarchy; further, this plan affords several unique features: 1) the format for procedures minimizes the writing responsibilities of the technical staff and maximizes use of the writing and editing staff; 2) review cycles have been structured to expedite the processing of documents; and 3) the numbers of documents needed to support the program have been appreciably reduced

Impact of Access to Online Databases on Document Delivery Services within Iranian Academic Libraries

Directory of Open Access Journals (Sweden)

Zohreh Zahedi

2007-04-01

Full Text Available The present study investigates the impact of access to online databases on the document delivery services in Iranian Academic Libraries, within the framework of factors such as number of orders lodged over the years studied and their trends, expenditures made by each university, especially those universities and groups that had the highest number of orders. This investigation was carried out through a survey and by calling on the library document supply unit in universities as well as in-person interview with librarians in charge. The study sample was confined to the universities of Shiraz, Tehran and Tarbiyat Modaress along with their faculties. Findings indicate that the rate of document requests in various universities depends on the target audience, capabilities, students’ familiarity as well as mode of document delivery services..

Impact of an electronic health record operating room management system in ophthalmology on documentation time, surgical volume, and staffing.

Science.gov (United States)

Sanders, David S; Read-Brown, Sarah; Tu, Daniel C; Lambert, William E; Choi, Dongseok; Almario, Bella M; Yackel, Thomas R; Brown, Anna S; Chiang, Michael F

2014-05-01

Although electronic health record (EHR) systems have potential benefits, such as improved safety and quality of care, most ophthalmology practices in the United States have not adopted these systems. Concerns persist regarding potential negative impacts on clinical workflow. In particular, the impact of EHR operating room (OR) management systems on clinical efficiency in the ophthalmic surgery setting is unknown. To determine the impact of an EHR OR management system on intraoperative nursing documentation time, surgical volume, and staffing requirements. For documentation time and circulating nurses per procedure, a prospective cohort design was used between January 10, 2012, and January 10, 2013. For surgical volume and overall staffing requirements, a case series design was used between January 29, 2011, and January 28, 2013. This study involved ophthalmic OR nurses (n = 13) and surgeons (n = 25) at an academic medical center. Electronic health record OR management system implementation. (1) Documentation time (percentage of operating time documenting [POTD], absolute documentation time in minutes), (2) surgical volume (procedures/time), and (3) staffing requirements (full-time equivalents, circulating nurses/procedure). Outcomes were measured during a baseline period when paper documentation was used and during the early (first 3 months) and late (4-12 months) periods after EHR implementation. There was a worsening in total POTD in the early EHR period (83%) vs paper baseline (41%) (P system implementation was associated with worsening of intraoperative nursing documentation time especially in shorter procedures. However, it is possible to implement an EHR OR management system without serious negative impacts on surgical volume and staffing requirements.

Principles for social impact assessment: A critical comparison between the international and US documents

International Nuclear Information System (INIS)

Vanclay, Frank

2006-01-01

The 'International Principles for Social Impact Assessment' and the 'Principles and Guidelines for Social Impact Assessment in the USA', both developed under the auspices of the International Association for Impact Assessment and published in 2003, are compared. Major differences in the definition and approach to social impact assessment (SIA) are identified. The US Principles and Guidelines is shown to be positivist/technocratic while the International Principles is identified as being democratic, participatory and constructivist. Deficiencies in both documents are identified. The field of SIA is changing to go beyond the prevention of negative impacts, to include issues of building social capital, capacity building, good governance, community engagement and social inclusion

Documenting the global impacts of beach sand mining

Science.gov (United States)

Young, R.; Griffith, A.

2009-04-01

For centuries, beach sand has been mined for use as aggregate in concrete, for heavy minerals, and for construction fill. The global extent and impact of this phenomenon has gone relatively unnoticed by academics, NGOs, and major news sources. Most reports of sand mining activities are found at the very local scale (if the mining is ever documented at all). Yet, sand mining in many localities has resulted in the complete destruction of beach (and related) ecosystems along with severe impacts to coastal protection and tourism. The Program for the Study of Developed Shorelines at Western Carolina University and Beachcare.org have initiated the construction of a global database of beach sand mining activities. The database is being built through a combination of site visits and through the data mining of media resources, peer reviewed papers, and reports from private and governmental entities. Currently, we have documented sand mining in 35 countries on 6 continents representing the removal of millions of cubic meters of sand. Problems extend from Asia where critical infrastructure has been disrupted by sand mining to the Caribbean where policy reform has swiftly followed a highly publicized theft of sand. The Program for the Study of Developed Shorelines recently observed extensive sand mining in Morocco at the regional scale. Tens of kilometers of beach have been stripped of sand and the mining continues southward reducing hope of a thriving tourism-based economy. Problems caused by beach sand mining include: destruction of natural beaches and the ecosystems they protect (e.g. dunes, wetlands), habitat loss for globally important species (e.g. turtles, shorebirds), destruction of nearshore marine ecosystems, increased shoreline erosion rates, reduced protection from storms, tsunamis, and wave events, and economic losses through tourist abandonment and loss of coastal aesthetics. The threats posed by sand mining are made even more critical given the prospect of a

Document reconstruction by layout analysis of snippets

Science.gov (United States)

Kleber, Florian; Diem, Markus; Sablatnig, Robert

2010-02-01

Document analysis is done to analyze entire forms (e.g. intelligent form analysis, table detection) or to describe the layout/structure of a document. Also skew detection of scanned documents is performed to support OCR algorithms that are sensitive to skew. In this paper document analysis is applied to snippets of torn documents to calculate features for the reconstruction. Documents can either be destroyed by the intention to make the printed content unavailable (e.g. tax fraud investigation, business crime) or due to time induced degeneration of ancient documents (e.g. bad storage conditions). Current reconstruction methods for manually torn documents deal with the shape, inpainting and texture synthesis techniques. In this paper the possibility of document analysis techniques of snippets to support the matching algorithm by considering additional features are shown. This implies a rotational analysis, a color analysis and a line detection. As a future work it is planned to extend the feature set with the paper type (blank, checked, lined), the type of the writing (handwritten vs. machine printed) and the text layout of a snippet (text size, line spacing). Preliminary results show that these pre-processing steps can be performed reliably on a real dataset consisting of 690 snippets.

Various Landscapes and Features on Europa

Science.gov (United States)

1997-01-01

These 15 frames show the great variety of surface features on Jupiter's icy moon, Europa, which have been revealed by the Galileo spacecraft Solid State Imaging (CCD) system during its first six orbits around Jupiter from June 1996 to February 1997. North is to the top of each of the images. The features seen on Europa's surface document both internal and external processes shaping the icy crust. Internal processes and the possible presence of liquid water beneath the ice are indicated by features such as 'dark spots', lobe-shaped flow features, 'puddles','mottled terrain', knobs, pits, and the darker areas along ridges and triple bands.Europa is subjected to constant tugging from the giant planet, Jupiter, as well as from its neighboring moons, Io and Ganymede. This causes 'tidal' forces that affect Europa's interior and surface. Evidence for such forces includes ridges, fractures, wedge-shaped bands, and areas of 'chaos'. Some of these features result from alternate extension and compression buckling and pulling apart Europa's icy shell.Impact craters document external effects on a planet's surface. Although present on Europa, impact craters are relatively scarce compared to the number seen on Ganymede, Callisto, and on the surfaces of most other 'rocky' planets and moons in our solar system. This scarcity of craters suggests that the surface of Europa is very young. 'Maculae' on Europa may be the scars from large impact events.These images have resolutions from 27 meters (89 feet) to 7 kilometers (4.3 miles) per picture element (pixel) and were taken by Galileo at ranges of 2,500 kilometers (1,525 miles) to 677,000 kilometers (413,000 miles) from Europa.The Jet Propulsion Laboratory, Pasadena, CA manages the Galileo mission for NASA's Office of Space Science, Washington, DC. JPL is an operating division of California Institute of Technology (Caltech).This image and other images and data received from Galileo are posted on the World Wide Web, on the Galileo

Clinical decision support improves quality of telephone triage documentation--an analysis of triage documentation before and after computerized clinical decision support.

Science.gov (United States)

North, Frederick; Richards, Debra D; Bremseth, Kimberly A; Lee, Mary R; Cox, Debra L; Varkey, Prathibha; Stroebel, Robert J

2014-03-20

Clinical decision support (CDS) has been shown to be effective in improving medical safety and quality but there is little information on how telephone triage benefits from CDS. The aim of our study was to compare triage documentation quality associated with the use of a clinical decision support tool, ExpertRN©. We examined 50 triage documents before and after a CDS tool was used in nursing triage. To control for the effects of CDS training we had an additional control group of triage documents created by nurses who were trained in the CDS tool, but who did not use it in selected notes. The CDS intervention cohort of triage notes was compared to both the pre-CDS notes and the CDS trained (but not using CDS) cohort. Cohorts were compared using the documentation standards of the American Academy of Ambulatory Care Nursing (AAACN). We also compared triage note content (documentation of associated positive and negative features relating to the symptoms, self-care instructions, and warning signs to watch for), and documentation defects pertinent to triage safety. Three of five AAACN documentation standards were significantly improved with CDS. There was a mean of 36.7 symptom features documented in triage notes for the CDS group but only 10.7 symptom features in the pre-CDS cohort (p < 0.0001) and 10.2 for the cohort that was CDS-trained but not using CDS (p < 0.0001). The difference between the mean of 10.2 symptom features documented in the pre-CDS and the mean of 10.7 symptom features documented in the CDS-trained but not using was not statistically significant (p = 0.68). CDS significantly improves triage note documentation quality. CDS-aided triage notes had significantly more information about symptoms, warning signs and self-care. The changes in triage documentation appeared to be the result of the CDS alone and not due to any CDS training that came with the CDS intervention. Although this study shows that CDS can improve documentation, further study is needed

Features based approach for indexation and representation of unstructured Arabic documents

Directory of Open Access Journals (Sweden)

Mohamed Salim El Bazzi

2017-06-01

Full Text Available The increase of textual information published in Arabic language on the internet, public libraries and administrations requires implementing effective techniques for the extraction of relevant information contained in large corpus of texts. The purpose of indexing is to create a document representation that easily find and identify the relevant information in a set of documents. However, mining textual data is becoming a complicated task, especially when taking semantic into consideration. In this paper, we will present an indexation system based on contextual representation that will take the advantage of semantic links given in a document. Our approach is based on the extraction of keyphrases. Then, each document is represented by its relevant keyphrases instead of its simple keywords. The experimental results confirms the effectiveness of our approach.

A document processing pipeline for annotating chemical entities in scientific documents.

Science.gov (United States)

Campos, David; Matos, Sérgio; Oliveira, José L

2015-01-01

The recognition of drugs and chemical entities in text is a very important task within the field of biomedical information extraction, given the rapid growth in the amount of published texts (scientific papers, patents, patient records) and the relevance of these and other related concepts. If done effectively, this could allow exploiting such textual resources to automatically extract or infer relevant information, such as drug profiles, relations and similarities between drugs, or associations between drugs and potential drug targets. The objective of this work was to develop and validate a document processing and information extraction pipeline for the identification of chemical entity mentions in text. We used the BioCreative IV CHEMDNER task data to train and evaluate a machine-learning based entity recognition system. Using a combination of two conditional random field models, a selected set of features, and a post-processing stage, we achieved F-measure results of 87.48% in the chemical entity mention recognition task and 87.75% in the chemical document indexing task. We present a machine learning-based solution for automatic recognition of chemical and drug names in scientific documents. The proposed approach applies a rich feature set, including linguistic, orthographic, morphological, dictionary matching and local context features. Post-processing modules are also integrated, performing parentheses correction, abbreviation resolution and filtering erroneous mentions using an exclusion list derived from the training data. The developed methods were implemented as a document annotation tool and web service, freely available at http://bioinformatics.ua.pt/becas-chemicals/.

The Effect of Preprocessing on Arabic Document Categorization

Directory of Open Access Journals (Sweden)

Abdullah Ayedh

2016-04-01

Full Text Available Preprocessing is one of the main components in a conventional document categorization (DC framework. This paper aims to highlight the effect of preprocessing tasks on the efficiency of the Arabic DC system. In this study, three classification techniques are used, namely, naive Bayes (NB, k-nearest neighbor (KNN, and support vector machine (SVM. Experimental analysis on Arabic datasets reveals that preprocessing techniques have a significant impact on the classification accuracy, especially with complicated morphological structure of the Arabic language. Choosing appropriate combinations of preprocessing tasks provides significant improvement on the accuracy of document categorization depending on the feature size and classification techniques. Findings of this study show that the SVM technique has outperformed the KNN and NB techniques. The SVM technique achieved 96.74% micro-F1 value by using the combination of normalization and stemming as preprocessing tasks.

A New Feature Selection Algorithm Based on the Mean Impact Variance

Directory of Open Access Journals (Sweden)

Weidong Cheng

2014-01-01

Full Text Available The selection of fewer or more representative features from multidimensional features is important when the artificial neural network (ANN algorithm is used as a classifier. In this paper, a new feature selection method called the mean impact variance (MIVAR method is proposed to determine the feature that is more suitable for classification. Moreover, this method is constructed on the basis of the training process of the ANN algorithm. To verify the effectiveness of the proposed method, the MIVAR value is used to rank the multidimensional features of the bearing fault diagnosis. In detail, (1 70-dimensional all waveform features are extracted from a rolling bearing vibration signal with four different operating states, (2 the corresponding MIVAR values of all 70-dimensional features are calculated to rank all features, (3 14 groups of 10-dimensional features are separately generated according to the ranking results and the principal component analysis (PCA algorithm and a back propagation (BP network is constructed, and (4 the validity of the ranking result is proven by training this BP network with these seven groups of 10-dimensional features and by comparing the corresponding recognition rates. The results prove that the features with larger MIVAR value can lead to higher recognition rates.

Which Features of Spanish Learners' Pronunciation Most Impact Listener Evaluations?

Science.gov (United States)

McBride, Kara

2015-01-01

This study explores which features of Spanish as a foreign language (SFL) pronunciation most impact raters' evaluations. Native Spanish speakers (NSSs) from regions with different pronunciation norms were polled: 147 evaluators from northern Mexico and 99 evaluators from central Argentina. These evaluations were contrasted with ratings from…

Vietnamese Document Representation and Classification

Science.gov (United States)

Nguyen, Giang-Son; Gao, Xiaoying; Andreae, Peter

Vietnamese is very different from English and little research has been done on Vietnamese document classification, or indeed, on any kind of Vietnamese language processing, and only a few small corpora are available for research. We created a large Vietnamese text corpus with about 18000 documents, and manually classified them based on different criteria such as topics and styles, giving several classification tasks of different difficulty levels. This paper introduces a new syllable-based document representation at the morphological level of the language for efficient classification. We tested the representation on our corpus with different classification tasks using six classification algorithms and two feature selection techniques. Our experiments show that the new representation is effective for Vietnamese categorization, and suggest that best performance can be achieved using syllable-pair document representation, an SVM with a polynomial kernel as the learning algorithm, and using Information gain and an external dictionary for feature selection.

Document flow segmentation for business applications

Science.gov (United States)

Daher, Hani; Belaïd, Abdel

2013-12-01

The aim of this paper is to propose a document flow supervised segmentation approach applied to real world heterogeneous documents. Our algorithm treats the flow of documents as couples of consecutive pages and studies the relationship that exists between them. At first, sets of features are extracted from the pages where we propose an approach to model the couple of pages into a single feature vector representation. This representation will be provided to a binary classifier which classifies the relationship as either segmentation or continuity. In case of segmentation, we consider that we have a complete document and the analysis of the flow continues by starting a new document. In case of continuity, the couple of pages are assimilated to the same document and the analysis continues on the flow. If there is an uncertainty on whether the relationship between the couple of pages should be classified as a continuity or segmentation, a rejection is decided and the pages analyzed until this point are considered as a "fragment". The first classification already provides good results approaching 90% on certain documents, which is high at this level of the system.

Upheaval Dome, Utah, USA: Impact Origin Confirmed

OpenAIRE

Buchner, Elmar; Kenkmann, Thomas

2008-01-01

Upheaval Dome is a unique circular structure on the Colorado Plateau in SE Utah, the origin of which has been controversially discussed for decades. It has been interpreted as a crypto volcanic feature, a salt diapir, a pinched-off salt diapir, and an eroded impact crater. While recent structural mapping, modeling, and analyses of deformation mechanisms strongly support an impact origin, ultimate proof, namely the documentation of unambiguous shock features, has yet to be successfully provide...

The Late Pliocene Eltanin Impact - Documentation From Sediment Core Analyses

Science.gov (United States)

Gersonde, R.; Kuhn, G.; Kyte, F. T.; Flores, J.; Becquey, S.

2002-12-01

The expeditions ANT-XII/4 (1995) and ANT-XVIII/5a (2001) of the RV POLARSTERN collected extensive bathymetric and seismic data sets as well as sediment cores from an area in the Bellingshausen Sea (eastern Pacific Southern Ocean) that allow the first comprehensive geoscientific documentation of an asteroid impact into a deep ocean (~ 5 km) basin, named the Eltanin impact. Impact deposits have now been recovered from a total of more than 20 sediment cores collected in an area covering about 80,000 km2. Combined biomagnetostratigraphic dating places the impact event into the earliest Matuyama Chron, a period of enhanced climate variability. Sediment texture analyses and studies of sediment composition including grain size and microfossil distribution reveal the pattern of impact-related sediment disturbance and the sedimentary processes immediately following the impact event. The pattern is complicated by the San Martin Seamounts (~57.5 S, 91 W), a large topographic elevation that rises up to 3000 m above the surrounding abyssal plain in the area affected by the Eltanin impact. The impact ripped up sediments as old as Eocene and probably Paleocene that have been redeposited in a chaotic assemblage. This is followed by a sequence sedimented from a turbulent flow at the sea floor, overprinted by fall-out of airborne meteoritic ejecta that settled trough the water column. Grain size distribution reveals the timing and interaction of the different sedimentary processes. The gathered estimate of ejecta mass deposited over the studied area, composed of shock-melted asteroidal matrial and unmelted meteorites including fragments up to 2.5 cm in diameter, point to an Eltanin asteroid larger than the 1 km in diameter size originally suggested as a minimum based on the ANT-XII/4 results. This places the energy released by the impact at the threshold of those considered to cause environmental disturbance at a global scale and it makes the impact a likely transport mechanism

POINT CLOUD MAPPING METHODS FOR DOCUMENTING CULTURAL LANDSCAPE FEATURES AT THE WORMSLOE STATE HISTORIC SITE, SAVANNAH, GEORGIA, USA

Directory of Open Access Journals (Sweden)

T. R. Jordana

2016-06-01

Full Text Available Documentation of the three-dimensional (3D cultural landscape has traditionally been conducted during site visits using conventional photographs, standard ground surveys and manual measurements. In recent years, there have been rapid developments in technologies that produce highly accurate 3D point clouds, including aerial LiDAR, terrestrial laser scanning, and photogrammetric data reduction from unmanned aerial systems (UAS images and hand held photographs using Structure from Motion (SfM methods. These 3D point clouds can be precisely scaled and used to conduct measurements of features even after the site visit has ended. As a consequence, it is becoming increasingly possible to collect non-destructive data for a wide variety of cultural site features, including landscapes, buildings, vegetation, artefacts and gardens. As part of a project for the U.S. National Park Service, a variety of data sets have been collected for the Wormsloe State Historic Site, near Savannah, Georgia, USA. In an effort to demonstrate the utility and versatility of these methods at a range of scales, comparisons of the features mapped with different techniques will be discussed with regards to accuracy, data set completeness, cost and ease-of-use.

What Are Critical Features of Science Curriculum Materials That Impact Student and Teacher Outcomes?

Science.gov (United States)

Roblin, Natalie Pareja; Schunn, Christian; McKenney, Susan

2018-01-01

Large investments are made in curriculum materials with the goal of supporting science education reform. However, relatively little evidence is available about what features of curriculum materials really matter to impact student and teacher learning. To address this need, the current study examined curriculum features associated with student and…

Gstruct: a system for extracting schemas from GML documents

Science.gov (United States)

Chen, Hui; Zhu, Fubao; Guan, Jihong; Zhou, Shuigeng

2008-10-01

Geography Markup Language (GML) becomes the de facto standard for geographic information representation on the internet. GML schema provides a way to define the structure, content, and semantic of GML documents. It contains useful structural information of GML documents and plays an important role in storing, querying and analyzing GML data. However, GML schema is not mandatory, and it is common that a GML document contains no schema. In this paper, we present Gstruct, a tool for GML schema extraction. Gstruct finds the features in the input GML documents, identifies geometry datatypes as well as simple datatypes, then integrates all these features and eliminates improper components to output the optimal schema. Experiments demonstrate that Gstruct is effective in extracting semantically meaningful schemas from GML documents.

Self-authentication of value documents

Science.gov (United States)

Hayosh, Thomas D.

1998-04-01

To prevent fraud it is critical to distinguish an authentic document from a counterfeit or altered document. Most current technologies rely on difficult-to-print human detectable features which are added to a document to prevent illegal reproduction. Fraud detection is mostly accomplished by human observation and is based upon the examiner's knowledge, experience and time allotted for examination of a document. Another approach to increasing the security of a value document is to add a unique property to each document. Data about that property is then encoded on the document itself and finally secured using a public key based digital signature. In such a scheme, machine readability of authenticity is possible. This paper describes a patent-applied-for methodology using the unique property of magnetic ink printing, magnetic remanence, that provides for full self- authentication when used with a recordable magnetic stripe for storing a digital signature and other document data. Traditionally the authenticity of a document is determined by physical examination for color, background printing, paper texture, printing resolution, and ink characteristics. On an initial level, there may be numerous security features present on a value document but only a few can be detected and evaluated by the untrained individual. Because security features are normally not standardized except on currency, training tellers and cashiers to do extensive security evaluation is not practical, even though these people are often the only people who get a chance to closely examine the document in a payment system which is back-end automated. In the context of this paper, one should be thinking about value documents such as commercial and personal checks although the concepts presented here can easily be applied to travelers cheques, credit cards, event tickets, passports, driver's licenses, motor vehicle titles, and even currency. For a practical self-authentication system, the false alarms

Semantic Document Library: A Virtual Research Environment for Documents, Data and Workflows Sharing

Science.gov (United States)

Kotwani, K.; Liu, Y.; Myers, J.; Futrelle, J.

2008-12-01

The Semantic Document Library (SDL) was driven by use cases from the environmental observatory communities and is designed to provide conventional document repository features of uploading, downloading, editing and versioning of documents as well as value adding features of tagging, querying, sharing, annotating, ranking, provenance, social networking and geo-spatial mapping services. It allows users to organize a catalogue of watershed observation data, model output, workflows, as well publications and documents related to the same watershed study through the tagging capability. Users can tag all relevant materials using the same watershed name and find all of them easily later using this tag. The underpinning semantic content repository can store materials from other cyberenvironments such as workflow or simulation tools and SDL provides an effective interface to query and organize materials from various sources. Advanced features of the SDL allow users to visualize the provenance of the materials such as the source and how the output data is derived. Other novel features include visualizing all geo-referenced materials on a geospatial map. SDL as a component of a cyberenvironment portal (the NCSA Cybercollaboratory) has goal of efficient management of information and relationships between published artifacts (Validated models, vetted data, workflows, annotations, best practices, reviews and papers) produced from raw research artifacts (data, notes, plans etc.) through agents (people, sensors etc.). Tremendous scientific potential of artifacts is achieved through mechanisms of sharing, reuse and collaboration - empowering scientists to spread their knowledge and protocols and to benefit from the knowledge of others. SDL successfully implements web 2.0 technologies and design patterns along with semantic content management approach that enables use of multiple ontologies and dynamic evolution (e.g. folksonomies) of terminology. Scientific documents involved with

A New Wavelet-Based Document Image Segmentation Scheme

Institute of Scientific and Technical Information of China (English)

赵健; 李道京; 俞卞章; 耿军平

2002-01-01

The document image segmentation is very useful for printing, faxing and data processing. An algorithm is developed for segmenting and classifying document image. Feature used for classification is based on the histogram distribution pattern of different image classes. The important attribute of the algorithm is using wavelet correlation image to enhance raw image's pattern, so the classification accuracy is improved. In this paper document image is divided into four types: background, photo, text and graph. Firstly, the document image background has been distingusished easily by former normally method; secondly, three image types will be distinguished by their typical histograms, in order to make histograms feature clearer, each resolution' s HH wavelet subimage is used to add to the raw image at their resolution. At last, the photo, text and praph have been devided according to how the feature fit to the Laplacian distrbution by -X2 and L. Simulations show that classification accuracy is significantly improved. The comparison with related shows that our algorithm provides both lower classification error rates and better visual results.

Document image retrieval through word shape coding.

Science.gov (United States)

Lu, Shijian; Li, Linlin; Tan, Chew Lim

2008-11-01

This paper presents a document retrieval technique that is capable of searching document images without OCR (optical character recognition). The proposed technique retrieves document images by a new word shape coding scheme, which captures the document content through annotating each word image by a word shape code. In particular, we annotate word images by using a set of topological shape features including character ascenders/descenders, character holes, and character water reservoirs. With the annotated word shape codes, document images can be retrieved by either query keywords or a query document image. Experimental results show that the proposed document image retrieval technique is fast, efficient, and tolerant to various types of document degradation.

Improving Naive Bayes with Online Feature Selection for Quick Adaptation to Evolving Feature Usefulness

Energy Technology Data Exchange (ETDEWEB)

Pon, R K; Cardenas, A F; Buttler, D J

2007-09-19

The definition of what makes an article interesting varies from user to user and continually evolves even for a single user. As a result, for news recommendation systems, useless document features can not be determined a priori and all features are usually considered for interestingness classification. Consequently, the presence of currently useless features degrades classification performance [1], particularly over the initial set of news articles being classified. The initial set of document is critical for a user when considering which particular news recommendation system to adopt. To address these problems, we introduce an improved version of the naive Bayes classifier with online feature selection. We use correlation to determine the utility of each feature and take advantage of the conditional independence assumption used by naive Bayes for online feature selection and classification. The augmented naive Bayes classifier performs 28% better than the traditional naive Bayes classifier in recommending news articles from the Yahoo! RSS feeds.

Market Analysis and Consumer Impacts Source Document. Part III. Consumer Behavior and Attitudes Toward Fuel Efficient Vehicles

Science.gov (United States)

1980-12-01

This source document on motor vehicle market analysis and consumer impacts consists of three parts. Part III consists of studies and reviews on: consumer awareness of fuel efficiency issues; consumer acceptance of fuel efficient vehicles; car size ch...

Beyond OCR : Multi-faceted understanding of handwritten document characteristics

NARCIS (Netherlands)

He, Sheng; Schomaker, Lambert

Handwritten document understanding is a fundamental research problem in pattern recognition and it relies on the effective features. In this paper, we propose a joint feature distribution (JFD) principle to design novel discriminative features which could be the joint distribution of features on

The investigation of crimes refering to forgery of documents and possession of forged documents

OpenAIRE

Kotovienė, Danutė

2011-01-01

THE INVESTIGATION OF CRIMES REFERING TO FORGERY OF DOCUMENTS AND POSSESSION OF FORGED DOCUMENTS Constantly improving informational technologies more and more get into our daily routine: nowadays it is widely spread internet payments, purchases, signing on-line agreements using electronic signatures. However, paper documents or other made of appropriate materials, which have material evidence, still have a very significant impact on our life. Its convey different aspects of states’ public work...

Document boundary determination using structural and lexical analysis

Science.gov (United States)

Taghva, Kazem; Cartright, Marc-Allen

2009-01-01

The document boundary determination problem is the process of identifying individual documents in a stack of papers. In this paper, we report on a classification system for automation of this process. The system employs features based on document structure and lexical content. We also report on experimental results to support the effectiveness of this system.

Integrated system for automated financial document processing

Science.gov (United States)

Hassanein, Khaled S.; Wesolkowski, Slawo; Higgins, Ray; Crabtree, Ralph; Peng, Antai

1997-02-01

A system was developed that integrates intelligent document analysis with multiple character/numeral recognition engines in order to achieve high accuracy automated financial document processing. In this system, images are accepted in both their grayscale and binary formats. A document analysis module starts by extracting essential features from the document to help identify its type (e.g. personal check, business check, etc.). These features are also utilized to conduct a full analysis of the image to determine the location of interesting zones such as the courtesy amount and the legal amount. These fields are then made available to several recognition knowledge sources such as courtesy amount recognition engines and legal amount recognition engines through a blackboard architecture. This architecture allows all the available knowledge sources to contribute incrementally and opportunistically to the solution of the given recognition query. Performance results on a test set of machine printed business checks using the integrated system are also reported.

Reactor operation environmental information document

Energy Technology Data Exchange (ETDEWEB)

Haselow, J.S.; Price, V.; Stephenson, D.E.; Bledsoe, H.W.; Looney, B.B.

1989-12-01

The Savannah River Site (SRS) produces nuclear materials, primarily plutonium and tritium, to meet the requirements of the Department of Defense. These products have been formed in nuclear reactors that were built during 1950--1955 at the SRS. K, L, and P reactors are three of five reactors that have been used in the past to produce the nuclear materials. All three of these reactors discontinued operation in 1988. Currently, intense efforts are being extended to prepare these three reactors for restart in a manner that protects human health and the environment. To document that restarting the reactors will have minimal impacts to human health and the environment, a three-volume Reactor Operations Environmental Impact Document has been prepared. The document focuses on the impacts of restarting the K, L, and P reactors on both the SRS and surrounding areas. This volume discusses the geology, seismology, and subsurface hydrology. 195 refs., 101 figs., 16 tabs.

Securing XML Documents

Directory of Open Access Journals (Sweden)

Charles Shoniregun

2004-11-01

Full Text Available XML (extensible markup language is becoming the current standard for establishing interoperability on the Web. XML data are self-descriptive and syntax-extensible; this makes it very suitable for representation and exchange of semi-structured data, and allows users to define new elements for their specific applications. As a result, the number of documents incorporating this standard is continuously increasing over the Web. The processing of XML documents may require a traversal of all document structure and therefore, the cost could be very high. A strong demand for a means of efficient and effective XML processing has posed a new challenge for the database world. This paper discusses a fast and efficient indexing technique for XML documents, and introduces the XML graph numbering scheme. It can be used for indexing and securing graph structure of XML documents. This technique provides an efficient method to speed up XML data processing. Furthermore, the paper explores the classification of existing methods impact of query processing, and indexing.

Assessment of Genetics Understanding. Under What Conditions Do Situational Features Have an Impact on Measures?

Science.gov (United States)

Schmiemann, Philipp; Nehm, Ross H.; Tornabene, Robyn E.

2017-12-01

Understanding how situational features of assessment tasks impact reasoning is important for many educational pursuits, notably the selection of curricular examples to illustrate phenomena, the design of formative and summative assessment items, and determination of whether instruction has fostered the development of abstract schemas divorced from particular instances. The goal of our study was to employ an experimental research design to quantify the degree to which situational features impact inferences about participants' understanding of Mendelian genetics. Two participant samples from different educational levels and cultural backgrounds (high school, n = 480; university, n = 444; Germany and USA) were used to test for context effects. A multi-matrix test design was employed, and item packets differing in situational features (e.g., plant, animal, human, fictitious) were randomly distributed to participants in the two samples. Rasch analyses of participant scores from both samples produced good item fit, person reliability, and item reliability and indicated that the university sample displayed stronger performance on the items compared to the high school sample. We found, surprisingly, that in both samples, no significant differences in performance occurred among the animal, plant, and human item contexts, or between the fictitious and "real" item contexts. In the university sample, we were also able to test for differences in performance between genders, among ethnic groups, and by prior biology coursework. None of these factors had a meaningful impact upon performance or context effects. Thus some, but not all, types of genetics problem solving or item formats are impacted by situational features.

La Gestión Documental y su Impacto en el Sector Empresarial Cubano (Document Management and its Impact on Cuban Enterprise Sector

Directory of Open Access Journals (Sweden)

María de los Ángeles Ruiz González

2014-04-01

Full Text Available Resumen En el presente artículo se aborda la tendencia actual de los sistemas de gestión documental como nuevos paradigmas de gestión organizacional. Se realiza un énfasis en el sector empresarial cubano y el impacto de la gestión de información, documental y del conocimiento en los nuevos escenarios del sector empresarial cubano en las actuales condiciones de actualización del Modelo Económico. Se destaca a su vez el trabajo por proyectos que se establece entre las universidades y el sector empresarial. Se exponen algunos resultados derivados del diagnóstico de los subsistemas de información, documentación y conocimiento, aplicadas en las Unidades Docentes pertenecientes al Grupo Empresarial en Perfeccionamiento, aportando sugerencias y buenas prácticas, que permitan retroalimentar a las organizaciones en el uso de metodologías, herramientas y tecnologías basadas en el acceso abierto que permita apoyar a las empresas en el cumplimiento de las resoluciones y decretos ley vigentes en el país; así como identificar los problemas que afectan al subsistema de gestión de información y documentación, elementos claves que constituyen factores dinamizadores en el éxito empresarial. Abstract This paper studies current trend in document management systems as new paradigms of organizational management. Special emphasis is placed on the impact of information, document and knowledge management in the new scenarios of Cuban business given the current process of updating the economic model. The importance of working on projects between universities and business is also emphasized. This paper exposes some results from the diagnostic of the following subsystems: information, documentation and knowledge. This analysis was applied to teaching units belonging to the Business Group under Improvement. Suggestions and good practices were providing to organizations for feedback organizations in the use of methodologies and tools based on open access

Final Results of Shuttle MMOD Impact Database

Science.gov (United States)

Hyde, J. L.; Christiansen, E. L.; Lear, D. M.

2015-01-01

The Shuttle Hypervelocity Impact Database documents damage features on each Orbiter thought to be from micrometeoroids (MM) or orbital debris (OD). Data is divided into tables for crew module windows, payload bay door radiators and thermal protection systems along with other miscellaneous regions. The combined number of records in the database is nearly 3000. Each database record provides impact feature dimensions, location on the vehicle and relevant mission information. Additional detail on the type and size of particle that produced the damage site is provided when sampling data and definitive spectroscopic analysis results are available. Guidelines are described which were used in determining whether impact damage is from micrometeoroid or orbital debris impact based on the findings from scanning electron microscopy chemical analysis. Relationships assumed when converting from observed feature sizes in different shuttle materials to particle sizes will be presented. A small number of significant impacts on the windows, radiators and wing leading edge will be highlighted and discussed in detail, including the hypervelocity impact testing performed to estimate particle sizes that produced the damage.

Significance of the impact of motion compensation on the variability of PET image features

Science.gov (United States)

Carles, M.; Bach, T.; Torres-Espallardo, I.; Baltas, D.; Nestle, U.; Martí-Bonmatí, L.

2018-03-01

In lung cancer, quantification by positron emission tomography/computed tomography (PET/CT) imaging presents challenges due to respiratory movement. Our primary aim was to study the impact of motion compensation implied by retrospectively gated (4D)-PET/CT on the variability of PET quantitative parameters. Its significance was evaluated by comparison with the variability due to (i) the voxel size in image reconstruction and (ii) the voxel size in image post-resampling. The method employed for feature extraction was chosen based on the analysis of (i) the effect of discretization of the standardized uptake value (SUV) on complementarity between texture features (TF) and conventional indices, (ii) the impact of the segmentation method on the variability of image features, and (iii) the variability of image features across the time-frame of 4D-PET. Thirty-one PET-features were involved. Three SUV discretization methods were applied: a constant width (SUV resolution) of the resampling bin (method RW), a constant number of bins (method RN) and RN on the image obtained after histogram equalization (method EqRN). The segmentation approaches evaluated were 40% of SUVmax and the contrast oriented algorithm (COA). Parameters derived from 4D-PET images were compared with values derived from the PET image obtained for (i) the static protocol used in our clinical routine (3D) and (ii) the 3D image post-resampled to the voxel size of the 4D image and PET image derived after modifying the reconstruction of the 3D image to comprise the voxel size of the 4D image. Results showed that TF complementarity with conventional indices was sensitive to the SUV discretization method. In the comparison of COA and 40% contours, despite the values not being interchangeable, all image features showed strong linear correlations (r  >  0.91, p\\ll 0.001 ). Across the time-frames of 4D-PET, all image features followed a normal distribution in most patients. For our patient cohort, the

Specifications for human factors guiding documents

Energy Technology Data Exchange (ETDEWEB)

Rhodes, W; Szlapetis, I; MacGregor, C [Rhodes and Associates Inc., Toronto, ON (Canada)

1995-04-01

This report specifies the content, function and appearance of three proposed human factors guiding documents to be used by the Atomic Energy Control board and its licensees. These three guiding documents, to be developed at a later date, are: (a) Human Factors Process Guide; (b) Human Factors Activities Guide; and (c) Human Factors Design Integration Guide. The specifications were developed by examining the best documents as identified in a previous contract with the AECB (Review of Human Factors Guidelines and Methods by W. Rhodes, I. Szlapetis et al. 1992), and a brief literature review. The best features and content were selected from existing documents and used to develop specifications for the guiding documents. The developer of the actual guides would use these specifications to produce comprehensive and consolidated documents at a later date. (author). 128 ref., 7 figs.

Specifications for human factors guiding documents

International Nuclear Information System (INIS)

Rhodes, W.; Szlapetis, I.; MacGregor, C.

1995-04-01

This report specifies the content, function and appearance of three proposed human factors guiding documents to be used by the Atomic Energy Control board and its licensees. These three guiding documents, to be developed at a later date, are: (a) Human Factors Process Guide; (b) Human Factors Activities Guide; and (c) Human Factors Design Integration Guide. The specifications were developed by examining the best documents as identified in a previous contract with the AECB (Review of Human Factors Guidelines and Methods by W. Rhodes, I. Szlapetis et al. 1992), and a brief literature review. The best features and content were selected from existing documents and used to develop specifications for the guiding documents. The developer of the actual guides would use these specifications to produce comprehensive and consolidated documents at a later date. (author). 128 ref., 7 figs

32 CFR 989.23 - Contractor prepared documents.

Science.gov (United States)

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Contractor prepared documents. 989.23 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.23 Contractor prepared documents. All Air Force... should reflect on the cover sheet they are an Air Force document. Contractor preparation information...

Quantitative radiomics: impact of stochastic effects on textural feature analysis implies the need for standards.

Science.gov (United States)

Nyflot, Matthew J; Yang, Fei; Byrd, Darrin; Bowen, Stephen R; Sandison, George A; Kinahan, Paul E

2015-10-01

Image heterogeneity metrics such as textural features are an active area of research for evaluating clinical outcomes with positron emission tomography (PET) imaging and other modalities. However, the effects of stochastic image acquisition noise on these metrics are poorly understood. We performed a simulation study by generating 50 statistically independent PET images of the NEMA IQ phantom with realistic noise and resolution properties. Heterogeneity metrics based on gray-level intensity histograms, co-occurrence matrices, neighborhood difference matrices, and zone size matrices were evaluated within regions of interest surrounding the lesions. The impact of stochastic variability was evaluated with percent difference from the mean of the 50 realizations, coefficient of variation and estimated sample size for clinical trials. Additionally, sensitivity studies were performed to simulate the effects of patient size and image reconstruction method on the quantitative performance of these metrics. Complex trends in variability were revealed as a function of textural feature, lesion size, patient size, and reconstruction parameters. In conclusion, the sensitivity of PET textural features to normal stochastic image variation and imaging parameters can be large and is feature-dependent. Standards are needed to ensure that prospective studies that incorporate textural features are properly designed to measure true effects that may impact clinical outcomes.

Turning whine into wine: the fiscal impact of comprehensive documentation and billing for nonoperative pediatric surgical services.

Science.gov (United States)

Gollin, Gerald; Moores, Donald

2006-06-01

Some pediatric surgeons rarely document nonoperative services, believing that the reimbursement provided for such care is negligible. We evaluated the impact of comprehensive documentation and billing for nonoperative, pediatric surgical care. All bills submitted for inpatient, nonoperative care for 1 year were reviewed. Total receipts for documented admissions, consultations, critical care, and daily care were determined. The Evaluation and Management code billed for each service was recorded, and the total and average payments attributable to each Evaluation and Management code were calculated. Fifty-six percent of services were covered by Medicaid and 26% by a commercial insurer. There were 607 billed admission history and physical exams for which reimbursement totaled 43,493 dollars. Critical care services were provided to 49 patients and yielded 8964 dollars in payments. Six hundred thirty-nine inpatient consultations were performed with a reimbursement of 42,830 dollars. Daily care services were billed 1044 times and produced 71,579 dollars in payments. Overall reimbursement for documented, nonoperative services was 166,866 dollars. This represented 16.2% of total, noncontracted income for the practice. Despite a payer mix heavily weighted toward Medicaid, comprehensive documentation and billing for nonoperative services increased total, noncontracted reimbursement by almost 20% over what it would have been had only operative services been billed. The yield from properly documented, nonoperative care can be substantial.

Market Analysis and Consumer Impacts Source Document. Part I. The Motor Vehicle Market in the Late 1970's

Science.gov (United States)

1980-12-01

The source document on motor vehicle market analysis and consumer impact consists of three parts. Part I is an integrated overview of the motor vehicle market in the late 1970's, with sections on the structure of the market, motor vehicle trends, con...

Bibliography of documents and related materials collected for the Hawaii Geothermal Project Environmental Impact Statement

Energy Technology Data Exchange (ETDEWEB)

Glenn, F.M.; Boston, C.R.; Burns, J.C.; Hagan, C.W. Jr.; Saulsbury, J.W.; Wolfe, A.K.

1995-03-01

This report has been prepared to make available and archive information developed during preparation of the Environmental Impact Statement for Phases 3 and 4 of the Hawaii Geothermal Project as defined by the state of Hawaii in its April 1989 proposal to Congress. On May 17, 1994, the USDOE published a notice in the Federal Register withdrawing its Notice of Intent of February 14, 1992, to prepare the HGP EIS. Since the state of Hawaii is no longer pursuing or planning to pursue the HGP, DOE considers the project to be terminated. This report provides a bibliography of documents, published papers, and other reference materials that were obtained or used. The report provides citations for approximately 642 documents, published papers, and other reference materials that were gathered to describe the potentially affected environment on the islands of Hawaii, Maui, and Oahu. The listing also does not include all the reference materials developed by support subcontractors and cooperating agencies who participated in the project. This listing does not include correspondence or other types of personal communications. The documents listed in this report can be obtained from original sources or libraries.

Transportation System Requirements Document

International Nuclear Information System (INIS)

1993-09-01

This Transportation System Requirements Document (Trans-SRD) describes the functions to be performed by and the technical requirements for the Transportation System to transport spent nuclear fuel (SNF) and high-level radioactive waste (HLW) from Purchaser and Producer sites to a Civilian Radioactive Waste Management System (CRWMS) site, and between CRWMS sites. The purpose of this document is to define the system-level requirements for Transportation consistent with the CRWMS Requirement Document (CRD). These requirements include design and operations requirements to the extent they impact on the development of the physical segments of Transportation. The document also presents an overall description of Transportation, its functions, its segments, and the requirements allocated to the segments and the system-level interfaces with Transportation. The interface identification and description are published in the CRWMS Interface Specification

Text Classification and Distributional features techniques in Datamining and Warehousing

OpenAIRE

Bethu, Srikanth; Babu, G Charless; Vinoda, J; Priyadarshini, E; rao, M Raghavendra

2013-01-01

Text Categorization is traditionally done by using the term frequency and inverse document frequency.This type of method is not very good because, some words which are not so important may appear in the document .The term frequency of unimportant words may increase and document may be classified in the wrong category.For reducing the error of classifying of documents in wrong category. The Distributional features are introduced. In the Distribuional Features, the Distribution of the words in ...

Multiple approaches to valuation of conservation design and low-impact development features in residential subdivisions.

Science.gov (United States)

Bowman, Troy; Tyndall, John C; Thompson, Janette; Kliebenstein, James; Colletti, Joe P

2012-08-15

Residents, developers and civic officials are often faced with difficult decisions about appropriate land uses in and around metropolitan boundaries. Urban expansion brings with it the potential for negative environmental impacts, but there are alternatives, such as conservation subdivision design (CSD) or low-impact development (LID), which offer the possibility of mitigating some of these effects at the development site. Many urban planning jurisdictions across the Midwest do not currently have any examples of these designs and lack information to identify public support or barriers to use of these methods. This is a case study examining consumer value for conservation and low-impact design features in one housing market by using four different valuation techniques to estimate residents' willingness to pay for CSD and LID features in residential subdivisions. A contingent valuation survey of 1804 residents in Ames, IA assessed familiarity with and perceptions of subdivision development and used an ordered value approach to estimate willingness to pay for CSD and LID features. A majority of residents were not familiar with CSD or LID practices. Residents indicated a willingness to pay for most CSD and LID features with the exception of clustered housing. Gender, age, income, familiarity with LID practices, perceptions of attractiveness of features and the perceived effect of CSD and LID features on ease of future home sales were important factors influencing residents' willingness to pay. A hypothetical referendum measured willingness to pay for tax-funded conservation land purchases and estimated that a property tax of around $50 would be the maximum increase that would pass. Twenty-seven survey respondents participated in a subsequent series of experimental real estate negotiations that used an experimental auction mechanism to estimate willingness to pay for CSD and LID features. Participants indicated that clustered housing (with interspersed preserved forest

Documentation of spectrom-32

International Nuclear Information System (INIS)

Callahan, G.D.; Fossum, A.F.; Svalstad, D.K.

1989-01-01

SPECTROM-32 is a finite element program for analyzing two-dimensional and axisymmetric inelastic thermomechanical problems related to the geological disposal of nuclear waste. The code is part of the SPECTROM series of special-purpose computer programs that are being developed by RE/SPEC Inc. to address many unique rock mechanics problems encountered in analyzing radioactive wastes stored in geologic formations. This document presents the theoretical basis for the mathematical models, the finite element formulation and solution procedure of the program, a description of the input data for the program, verification problems, and details about program support and continuing documentation. The computer code documentation is intended to satisfy the requirements and guidelines outlined in the document entitled Final Technical Position on Documentation of Computer Codes for High-Level Waste Management. The principal component models used in the program involve thermoelastic, thermoviscoelastic, thermoelastic-plastic, and thermoviscoplastic types of material behavior. Special material considerations provide for the incorporation of limited-tension material behavior and consideration of jointed material behavior. Numerous program options provide the capabilities for various boundary conditions, sliding interfaces, excavation, backfill, arbitrary initial stresses, multiple material domains, load incrementation, plotting database storage and access of results, and other features unique to the geologic disposal of radioactive wastes. Numerous verification problems that exercise many of the program options and illustrate the required data input and printed results are included in the documentation

Online feature selection with streaming features.

Science.gov (United States)

Wu, Xindong; Yu, Kui; Ding, Wei; Wang, Hao; Zhu, Xingquan

2013-05-01

We propose a new online feature selection framework for applications with streaming features where the knowledge of the full feature space is unknown in advance. We define streaming features as features that flow in one by one over time whereas the number of training examples remains fixed. This is in contrast with traditional online learning methods that only deal with sequentially added observations, with little attention being paid to streaming features. The critical challenges for Online Streaming Feature Selection (OSFS) include 1) the continuous growth of feature volumes over time, 2) a large feature space, possibly of unknown or infinite size, and 3) the unavailability of the entire feature set before learning starts. In the paper, we present a novel Online Streaming Feature Selection method to select strongly relevant and nonredundant features on the fly. An efficient Fast-OSFS algorithm is proposed to improve feature selection performance. The proposed algorithms are evaluated extensively on high-dimensional datasets and also with a real-world case study on impact crater detection. Experimental results demonstrate that the algorithms achieve better compactness and higher prediction accuracy than existing streaming feature selection algorithms.

HANFORD SITE SOLID WASTE MANAGEMENT ENVIRONMENTAL IMPACT STATEMENT TECHNICAL INFORMATION DOCUMENT [SEC 1 THRU 4

International Nuclear Information System (INIS)

FRITZ, L.L.

2004-01-01

This Technical Information Document (TID) provides engineering data to support DOE/EIS-0286, ''Hanford Site Solid (Radioactive and Hazardous) Waste Program Environmental Impact Statement''. Assumptions and waste volumes used to calculate engineering data are also provided in this document. This chapter provides a brief description of: the Solid Waste Management Program (including a description of waste types and known characteristics of waste covered under the program), the Hanford Site (including a general discussion of the operating areas), and the alternatives analyzed. The Hanford Site Solid Waste Management Program and DOE/EIS-0286 address solid radioactive waste types generated by various activities from both onsite and offsite generators. The Environmental Restoration (ER) waste management activities are not within the scope of DOE/EIS-0286 or this TID. Activities for processing and disposal of immobilized low-activity waste (ILAW) are not within the scope of the Solid Waste Management Program and this TID

Features, Events, and Processes: Disruptive Events

Energy Technology Data Exchange (ETDEWEB)

J. King

2004-03-31

The primary purpose of this analysis is to evaluate seismic- and igneous-related features, events, and processes (FEPs). These FEPs represent areas of natural system processes that have the potential to produce disruptive events (DE) that could impact repository performance and are related to the geologic processes of tectonism, structural deformation, seismicity, and igneous activity. Collectively, they are referred to as the DE FEPs. This evaluation determines which of the DE FEPs are excluded from modeling used to support the total system performance assessment for license application (TSPA-LA). The evaluation is based on the data and results presented in supporting analysis reports, model reports, technical information, or corroborative documents that are cited in the individual FEP discussions in Section 6.2 of this analysis report.

Features, Events, and Processes: Disruptive Events

International Nuclear Information System (INIS)

J. King

2004-01-01

The primary purpose of this analysis is to evaluate seismic- and igneous-related features, events, and processes (FEPs). These FEPs represent areas of natural system processes that have the potential to produce disruptive events (DE) that could impact repository performance and are related to the geologic processes of tectonism, structural deformation, seismicity, and igneous activity. Collectively, they are referred to as the DE FEPs. This evaluation determines which of the DE FEPs are excluded from modeling used to support the total system performance assessment for license application (TSPA-LA). The evaluation is based on the data and results presented in supporting analysis reports, model reports, technical information, or corroborative documents that are cited in the individual FEP discussions in Section 6.2 of this analysis report

Clinical map document based on XML (cMDX): document architecture with mapping feature for reporting and analysing prostate cancer in radical prostatectomy specimens.

Science.gov (United States)

Eminaga, Okyaz; Hinkelammert, Reemt; Semjonow, Axel; Neumann, Joerg; Abbas, Mahmoud; Koepke, Thomas; Bettendorf, Olaf; Eltze, Elke; Dugas, Martin

2010-11-15

The pathology report of radical prostatectomy specimens plays an important role in clinical decisions and the prognostic evaluation in Prostate Cancer (PCa). The anatomical schema is a helpful tool to document PCa extension for clinical and research purposes. To achieve electronic documentation and analysis, an appropriate documentation model for anatomical schemas is needed. For this purpose we developed cMDX. The document architecture of cMDX was designed according to Open Packaging Conventions by separating the whole data into template data and patient data. Analogue custom XML elements were considered to harmonize the graphical representation (e.g. tumour extension) with the textual data (e.g. histological patterns). The graphical documentation was based on the four-layer visualization model that forms the interaction between different custom XML elements. Sensible personal data were encrypted with a 256-bit cryptographic algorithm to avoid misuse. In order to assess the clinical value, we retrospectively analysed the tumour extension in 255 patients after radical prostatectomy. The pathology report with cMDX can represent pathological findings of the prostate in schematic styles. Such reports can be integrated into the hospital information system. "cMDX" documents can be converted into different data formats like text, graphics and PDF. Supplementary tools like cMDX Editor and an analyser tool were implemented. The graphical analysis of 255 prostatectomy specimens showed that PCa were mostly localized in the peripheral zone (Mean: 73% ± 25). 54% of PCa showed a multifocal growth pattern. cMDX can be used for routine histopathological reporting of radical prostatectomy specimens and provide data for scientific analysis.

What are critical features of science curriculum materials that impact student and teacher outcomes?

NARCIS (Netherlands)

Roblin, Natalie Pareja; Schunn, Christian; McKenney, Susan

2018-01-01

Large investments are made in curriculum materials with the goal of supporting science education reform. However, relatively little evidence is available about what features of curriculum materials really matter to impact student and teacher learning. To address this need, the current study examined

Documenting Climate Models and Simulations: the ES-DOC Ecosystem in Support of CMIP

Science.gov (United States)

Pascoe, C. L.; Guilyardi, E.

2017-12-01

The results of climate models are of increasing and widespread importance. No longer is climate model output of sole interest to climate scientists and researchers in the climate change impacts and adaptation fields. Now non-specialists such as government officials, policy-makers, and the general public, all have an increasing need to access climate model output and understand its implications. For this host of users, accurate and complete metadata (i.e., information about how and why the data were produced) is required to document the climate modeling results. Here we describe the ES-DOC community-govern project to collect and make available documentation of climate models and their simulations for the internationally coordinated modeling activity CMIP6 (Coupled Model Intercomparison Project, Phase 6). An overview of the underlying standards, key properties and features, the evolution from CMIP5, the underlying tools and workflows as well as what modelling groups should expect and how they should engage with the documentation of their contribution to CMIP6 is also presented.

Using the Characteristics of Documents, Users and Tasks to Predict the Situational Relevance of Health Web Documents

Directory of Open Access Journals (Sweden)

Melinda Oroszlányová

2017-09-01

Full Text Available Relevance is usually estimated by search engines using document content, disregarding the user behind the search and the characteristics of the task. In this work, we look at relevance as framed in a situational context, calling it situational relevance, and analyze whether it is possible to predict it using documents, users and tasks characteristics. Using an existing dataset composed of health web documents, relevance judgments for information needs, user and task characteristics, we build a multivariate prediction model for situational relevance. Our model has an accuracy of 77.17%. Our findings provide insights into features that could improve the estimation of relevance by search engines, helping to conciliate the systemic and situational views of relevance. In a near future we will work on the automatic assessment of document, user and task characteristics.

Some features of normative document development at application of nanotechnologies

International Nuclear Information System (INIS)

Hajiyev, S.K.; Kazimov, F.K.; Nazarova, U.N.

2010-01-01

Development of normative documents connected with nanotechnologies application in oil extraction requires necessity of accounting the peculiarity of adoption of these technologies. For example, conditions of object application, physical-chemical parameters of used nanosubstances and nanocomposites as well as some anomalies of rheological properties of nanosolutions can be referred to such ones. One of such anomalies is ambiguity of distribution laws of various rheological parameters at selected data at different experiment conditions, which on distribution diagrams are expressed by characteristic concavity in the area of lowest concentrations (up to 0,001%) of nanopowders.

Impact of Quality Improvement Educational Interventions on Documented Adherence to Quality Measures for Adults with Crohn's Disease.

Science.gov (United States)

Greene, Laurence; Sapir, Tamar; Moreo, Kathleen; Carter, Jeffrey D; Patel, Barry; Higgins, Peter D R

2015-09-01

In recent years, leading organizations in inflammatory bowel disease (IBD) have developed quality measures for the care of adults with Crohn's disease or ulcerative colitis. We used chart audits to assess the impact of quality improvement educational activities on documented adherence to Physician Quality Reporting System measures for IBD. Twenty community-based gastroenterologists were recruited to participate in baseline chart audits (n = 200), a series of 4 accredited educational activities with feedback, and follow-up chart audits (n = 200). Trained abstractors reviewed randomly selected charts of adults with moderate or severe Crohn's disease. The charts were retrospectively abstracted for physicians' documented performance of the 2013 Physician Quality Reporting System IBD quality measures. We compared the physicians' baseline and posteducation rates of documented adherence with 10 of these measures. In a secondary analysis, we compared preeducation with posteducation difference scores of low-performing physicians, those whose baseline documentation rates were in the lowest quartile, and the rest of the cohort. At baseline, documentation of mean provider-level adherence to the 10 quality measures ranged from 3% to 98% (grand mean = 35.8%). In the overall analysis, baseline and posteducation rates of documented adherence did not differ significantly for any of the measures. However, for 4 measures, preeducation to posteducation difference scores were significantly greater among low performers than physicians in the highest 3 quartiles. The results of this preliminary pragmatic study indicate that quality improvement education affords the potential to improve adherence to Physician Quality Reporting System quality measures for IBD among low-performing gastroenterologists.

On the Feature Selection and Classification Based on Information Gain for Document Sentiment Analysis

Directory of Open Access Journals (Sweden)

Asriyanti Indah Pratiwi

2018-01-01

Full Text Available Sentiment analysis in a movie review is the needs of today lifestyle. Unfortunately, enormous features make the sentiment of analysis slow and less sensitive. Finding the optimum feature selection and classification is still a challenge. In order to handle an enormous number of features and provide better sentiment classification, an information-based feature selection and classification are proposed. The proposed method reduces more than 90% unnecessary features while the proposed classification scheme achieves 96% accuracy of sentiment classification. From the experimental results, it can be concluded that the combination of proposed feature selection and classification achieves the best performance so far.

The impact of signal normalization on seizure detection using line length features.

Science.gov (United States)

Logesparan, Lojini; Rodriguez-Villegas, Esther; Casson, Alexander J

2015-10-01

Accurate automated seizure detection remains a desirable but elusive target for many neural monitoring systems. While much attention has been given to the different feature extractions that can be used to highlight seizure activity in the EEG, very little formal attention has been given to the normalization that these features are routinely paired with. This normalization is essential in patient-independent algorithms to correct for broad-level differences in the EEG amplitude between people, and in patient-dependent algorithms to correct for amplitude variations over time. It is crucial, however, that the normalization used does not have a detrimental effect on the seizure detection process. This paper presents the first formal investigation into the impact of signal normalization techniques on seizure discrimination performance when using the line length feature to emphasize seizure activity. Comparing five normalization methods, based upon the mean, median, standard deviation, signal peak and signal range, we demonstrate differences in seizure detection accuracy (assessed as the area under a sensitivity-specificity ROC curve) of up to 52 %. This is despite the same analysis feature being used in all cases. Further, changes in performance of up to 22 % are present depending on whether the normalization is applied to the raw EEG itself or directly to the line length feature. Our results highlight the median decaying memory as the best current approach for providing normalization when using line length features, and they quantify the under-appreciated challenge of providing signal normalization that does not impair seizure detection algorithm performance.

The Impact of Solid Surface Features on Fluid-Fluid Interface Configuration

Science.gov (United States)

Araujo, J. B.; Brusseau, M. L. L.

2017-12-01

Pore-scale fluid processes in geological media are critical for a broad range of applications such as radioactive waste disposal, carbon sequestration, soil moisture distribution, subsurface pollution, land stability, and oil and gas recovery. The continued improvement of high-resolution image acquisition and processing have provided a means to test the usefulness of theoretical models developed to simulate pore-scale fluid processes, through the direct quantification of interfaces. High-resolution synchrotron X-ray microtomography is used in combination with advanced visualization tools to characterize fluid distributions in natural geologic media. The studies revealed the presence of fluid-fluid interface associated with macroscopic features on the surfaces of the solids such as pits and crevices. These features and respective fluid interfaces, which are not included in current theoretical or computational models, may have a significant impact on accurate simulation and understanding of multi-phase flow, energy, heat and mass transfer processes.

Clinical map document based on XML (cMDX: document architecture with mapping feature for reporting and analysing prostate cancer in radical prostatectomy specimens

Directory of Open Access Journals (Sweden)

Bettendorf Olaf

2010-11-01

Full Text Available Abstract Background The pathology report of radical prostatectomy specimens plays an important role in clinical decisions and the prognostic evaluation in Prostate Cancer (PCa. The anatomical schema is a helpful tool to document PCa extension for clinical and research purposes. To achieve electronic documentation and analysis, an appropriate documentation model for anatomical schemas is needed. For this purpose we developed cMDX. Methods The document architecture of cMDX was designed according to Open Packaging Conventions by separating the whole data into template data and patient data. Analogue custom XML elements were considered to harmonize the graphical representation (e.g. tumour extension with the textual data (e.g. histological patterns. The graphical documentation was based on the four-layer visualization model that forms the interaction between different custom XML elements. Sensible personal data were encrypted with a 256-bit cryptographic algorithm to avoid misuse. In order to assess the clinical value, we retrospectively analysed the tumour extension in 255 patients after radical prostatectomy. Results The pathology report with cMDX can represent pathological findings of the prostate in schematic styles. Such reports can be integrated into the hospital information system. "cMDX" documents can be converted into different data formats like text, graphics and PDF. Supplementary tools like cMDX Editor and an analyser tool were implemented. The graphical analysis of 255 prostatectomy specimens showed that PCa were mostly localized in the peripheral zone (Mean: 73% ± 25. 54% of PCa showed a multifocal growth pattern. Conclusions cMDX can be used for routine histopathological reporting of radical prostatectomy specimens and provide data for scientific analysis.

M and D SIG progress report: Laboratory simulations of LDEF impact features

Science.gov (United States)

Horz, Friedrich; Bernhard, R. P.; See, T. H.; Atkinson, D.; Allbrooks, M.

1992-01-01

Laboratory impact experiments are needed to understand the relationship between a measured penetration hole diameter and associated projectile dimension in the thermal blankets of experiment A0178, which occupied some 16 sq. m. These blankets are composed of 125 micron thick Teflon that has an Ag/enconel second mirror surface, backed by organic binder and Chemglaze paint for a total thickness of some 170 microns. While dedicated experiments are required to understand the penetration behavior of this compound target in detail, we report here on impact simulations sponsored by other projects into pure Teflon and aluminum targets. These experiments will allow first order interpretations of impact features on the Long Duration Exposure Facility (LDEF), and they will serve as guides for dedicated experiments that employ the real LDEF blankets, both exposed and unexposed, for a refined understanding of the LDEF's collisional environment. We employed a light gas gun to launch soda-lime glass spheres from 50 to 3200 microns in diameter that impacted targets of variable thickness. Penetration measurements are given.

Technical support document: Energy conservation standards for consumer products: Dishwashers, clothes washers, and clothes dryers including: Environmental impacts; regulatory impact analysis

Energy Technology Data Exchange (ETDEWEB)

1990-12-01

The Energy Policy and Conservation Act as amended (P.L. 94-163), establishes energy conservation standards for 12 of the 13 types of consumer products specifically covered by the Act. The legislation requires the Department of Energy (DOE) to consider new or amended standards for these and other types of products at specified times. This Technical Support Document presents the methodology, data and results from the analysis of the energy and economic impacts of standards on dishwashers, clothes washers, and clothes dryers. The economic impact analysis is performed in five major areas: An Engineering Analysis, which establishes technical feasibility and product attributes including costs of design options to improve appliance efficiency. A Consumer Analysis at two levels: national aggregate impacts, and impacts on individuals. The national aggregate impacts include forecasts of appliance sales, efficiencies, energy use, and consumer expenditures. The individual impacts are analyzed by Life-Cycle Cost (LCC), Payback Periods, and Cost of Conserved Energy (CCE), which evaluate the savings in operating expenses relative to increases in purchase price; A Manufacturer Analysis, which provides an estimate of manufacturers' response to the proposed standards. Their response is quantified by changes in several measures of financial performance for a firm. An Industry Impact Analysis shows financial and competitive impacts on the appliance industry. A Utility Analysis that measures the impacts of the altered energy-consumption patterns on electric utilities. A Environmental Effects analysis, which estimates changes in emissions of carbon dioxide, sulfur oxides, and nitrogen oxides, due to reduced energy consumption in the home and at the power plant. A Regulatory Impact Analysis collects the results of all the analyses into the net benefits and costs from a national perspective. 47 figs., 171 tabs. (JF)

Supplemental Information Source Document Waste Management

Energy Technology Data Exchange (ETDEWEB)

Wood, Craig [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Halpern, Jonathan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wrons, Ralph [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Reiser, Anita [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mond, Michael du [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Shain, Matthew [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2014-12-01

This Supplemental Information Source Document for Waste Management was prepared in support of future analyses including those that may be performed as part of the Sandia National Laboratories, New Mexico (SNL/NM) Site-Wide Environmental Impact Statement. This document presents information about waste management practices at SNL/NM, including definitions, inventory data, and an overview of current activities.

Assessing the impact of representational and contextual problem features on student use of right-hand rules

Science.gov (United States)

Kustusch, Mary Bridget

2016-06-01

Students in introductory physics struggle with vector algebra and these challenges are often associated with contextual and representational features of the problems. Performance on problems about cross product direction is particularly poor and some research suggests that this may be primarily due to misapplied right-hand rules. However, few studies have had the resolution to explore student use of right-hand rules in detail. This study reviews literature in several disciplines, including spatial cognition, to identify ten contextual and representational problem features that are most likely to influence performance on problems requiring a right-hand rule. Two quantitative measures of performance (correctness and response time) and two qualitative measures (methods used and type of errors made) were used to explore the impact of these problem features on student performance. Quantitative results are consistent with expectations from the literature, but reveal that some features (such as the type of reasoning required and the physical awkwardness of using a right-hand rule) have a greater impact than others (such as whether the vectors are placed together or separate). Additional insight is gained by the qualitative analysis, including identifying sources of difficulty not previously discussed in the literature and revealing that the use of supplemental methods, such as physically rotating the paper, can mitigate errors associated with certain features.

Reactor operation environmental information document

Energy Technology Data Exchange (ETDEWEB)

Bauer, L.R.; Hayes, D.W.; Hunter, C.H.; Marter, W.L.; Moyer, R.A.

1989-12-01

This volume is a reactor operation environmental information document for the Savannah River Plant. Topics include meteorology, surface hydrology, transport, environmental impacts, and radiation effects. 48 figs., 56 tabs. (KD)

From Oral Ceremony to Written Document: The Transitional Language of Anglo-Saxon Wills.

Science.gov (United States)

Danet, Brenda; Bogoch, Bryna

1992-01-01

Presents theoretical discussion of the emergence of linguistic features of documents that indicate society is moving toward a view of writing as a form of constitutive social action and of written documents as autonomous material objects having a life of their own. Linguistic features of Anglo-Saxon wills are shown to differ from those of modern…

Stamp Detection in Color Document Images

DEFF Research Database (Denmark)

Micenkova, Barbora; van Beusekom, Joost

2011-01-01

, moreover, it can be imprinted with a variable quality and rotation. Previous methods were restricted to detection of stamps of particular shapes or colors. The method presented in the paper includes segmentation of the image by color clustering and subsequent classification of candidate solutions...... by geometrical and color-related features. The approach allows for differentiation of stamps from other color objects in the document such as logos or texts. For the purpose of evaluation, a data set of 400 document images has been collected, annotated and made public. With the proposed method, recall of 83...

Technical Support Document for Version 3.6.1 of the COMcheck Software

Energy Technology Data Exchange (ETDEWEB)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan; Halverson, Mark A.; Lucas, Robert G.; Richman, Eric E.; Schultz, Robert W.; Winiarski, David W.

2009-09-29

This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.

8 CFR 333.2 - Attachment of photographs to documents.

Science.gov (United States)

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Attachment of photographs to documents. 333... PHOTOGRAPHS § 333.2 Attachment of photographs to documents. A signed photograph of the applicant must be... portion of the photograph in such a manner as not to obscure the features of the applicant. [56 FR 50495...

Radiographic features of paediatric pneumocystis pneumonia - a historical perspective

International Nuclear Information System (INIS)

Pitcher, R.D.; Zar, H.J.

2008-01-01

Aim: To determine differences between the plain radiographic features of paediatric pneumocystis pneumonia (PCP) recorded before the emergence of human immunodeficiency virus (HIV) in 1982 and those documented in the HIV era. To establish differences in the radiographic features of PCP documented in HIV-infected children in developed and developing countries. Method: A Medline search of articles was conducted from 1950 to 2006, using the terms 'pneumocystis pneumonia in children' and 'chest radiographic features' or 'bilateral opacification' or 'lobar consolidation' or 'asymmetrical opacification' or 'pneumatocoeles' or 'cavities' or 'pneumothorax' or 'pneumomediastinum' or 'pleural effusion' or 'mediastinal adenopathy' or 'nodules' or 'normal chest radiography'. Appropriate articles were retrieved, radiological data extracted, reference lists examined and hand searches of referenced articles conducted. Results: Diffuse bilateral 'ground-glass' or alveolar pulmonary opacification, which may show some asymmetry, has been consistently documented as the commonest radiographic finding in childhood PCP throughout the period under review. The less common radiological features of PCP in children are similar to those in adults. In developed countries, PCP-related pulmonary air cysts have been reported at an earlier age in HIV-infected children, compared with uninfected children. PCP-related air cysts, pneumothorax, and pneumomediastinum have been reported in children in developed but not in developing countries. Conclusion: The radiological features of paediatric PCP documented before the HIV epidemic are similar to those recorded in the HIV era. Further study of the determinants of the uncommon radiographic features in children is warranted

Digital watermarks in electronic document circulation

Directory of Open Access Journals (Sweden)

Vitaliy Grigorievich Ivanenko

2017-07-01

Full Text Available This paper reviews different protection methods for electronic documents, their good and bad qualities. Common attacks on electronic documents are analyzed. Digital signature and ways of eliminating its flaws are studied. Different digital watermark embedding methods are described, they are divided into 2 types. The solution to protection of electronic documents is based on embedding digital watermarks. Comparative analysis of this methods is given. As a result, the most convenient method is suggested – reversible data hiding. It’s remarked that this technique excels at securing the integrity of the container and its digital watermark. Digital watermark embedding system should prevent illegal access to the digital watermark and its container. Digital watermark requirements for electronic document protection are produced. Legal aspect of copyright protection is reviewed. Advantages of embedding digital watermarks in electronic documents are produced. Modern reversible data hiding techniques are studied. Distinctive features of digital watermark use in Russia are highlighted. Digital watermark serves as an additional layer of defense, that is in most cases unknown to the violator. With an embedded digital watermark, it’s impossible to misappropriate the authorship of the document, even if the intruder signs his name on it. Therefore, digital watermarks can act as an effective additional tool to protect electronic documents.

MememxGATE: Unearthing Latent Content Features for Improved Search and Relevancy Ranking Across Scientific Literature

Science.gov (United States)

Wilson, B. D.; McGibbney, L. J.; Mattmann, C. A.; Ramirez, P.; Joyce, M.; Whitehall, K. D.

2015-12-01

Quantifying scientific relevancy is of increasing importance to NASA and the research community. Scientific relevancy may be defined by mapping the impacts of a particular NASA mission, instrument, and/or retrieved variables to disciplines such as climate predictions, natural hazards detection and mitigation processes, education, and scientific discoveries. Related to relevancy, is the ability to expose data with similar attributes. This in turn depends upon the ability for us to extract latent, implicit document features from scientific data and resources and make them explicit, accessible and useable for search activities amongst others. This paper presents MemexGATE; a server side application, command line interface and computing environment for running large scale metadata extraction, general architecture text engineering, document classification and indexing tasks over document resources such as social media streams, scientific literature archives, legal documentation, etc. This work builds on existing experiences using MemexGATE (funded, developed and validated through the DARPA Memex Progrjam PI Mattmann) for extracting and leveraging latent content features from document resources within the Materials Research domain. We extend the software functionality capability to the domain of scientific literature with emphasis on the expansion of gazetteer lists, named entity rules, natural language construct labeling (e.g. synonym, antonym, hyponym, etc.) efforts to enable extraction of latent content features from data hosted by wide variety of scientific literature vendors (AGU Meeting Abstract Database, Springer, Wiley Online, Elsevier, etc.) hosting earth science literature. Such literature makes both implicit and explicit references to NASA datasets and relationships between such concepts stored across EOSDIS DAAC's hence we envisage that a significant part of this effort will also include development and understanding of relevancy signals which can ultimately

FEATURES OF TECHNOLOGIES CREATE INTERACTIVE ELECTRONIC DOCUMENT FOR SUPPORT OF LABORATORY PRACTICAL PHYSICS

Directory of Open Access Journals (Sweden)

Mykola A. Meleshko

2014-02-01

Full Text Available The article discusses the content of the «flash-book» construct, defining its properties and possible components. There are presented some examples of components programming steps of “authoring flash – book”, considered the possibility of using such an electronic document to optimize the learning process at the Technical University in the performance of laboratory training on general physics. The technique of its using to provide individualized approach to learning and the use of various experimental base from classical to digital equipment laboratories is proposed. It was carried out the analysis of ways to improve such interactive electronic document for the development of information technology competence of engineering students.

ARABIC TEXT CLASSIFICATION USING NEW STEMMER FOR FEATURE SELECTION AND DECISION TREES

Directory of Open Access Journals (Sweden)

SAID BAHASSINE

2017-06-01

Full Text Available Text classification is the process of assignment of unclassified text to appropriate classes based on their content. The most prevalent representation for text classification is the bag of words vector. In this representation, the words that appear in documents often have multiple morphological structures, grammatical forms. In most cases, this morphological variant of words belongs to the same category. In the first part of this paper, anew stemming algorithm was developed in which each term of a given document is represented by its root. In the second part, a comparative study is conducted of the impact of two stemming algorithms namely Khoja’s stemmer and our new stemmer (referred to hereafter by origin-stemmer on Arabic text classification. This investigation was carried out using chi-square as a feature of selection to reduce the dimensionality of the feature space and decision tree classifier. In order to evaluate the performance of the classifier, this study used a corpus that consists of 5070 documents independently classified into six categories: sport, entertainment, business, Middle East, switch and world on WEKA toolkit. The recall, f-measure and precision measures are used to compare the performance of the obtained models. The experimental results show that text classification using rout stemmer outperforms classification using Khoja’s stemmer. The f-measure was 92.9% in sport category and 89.1% in business category.

The Role of Book Features in Young Children's Transfer of Information from Picture Books to Real-World Contexts.

Science.gov (United States)

Strouse, Gabrielle A; Nyhout, Angela; Ganea, Patricia A

2018-01-01

Picture books are an important source of new language, concepts, and lessons for young children. A large body of research has documented the nature of parent-child interactions during shared book reading. A new body of research has begun to investigate the features of picture books that support children's learning and transfer of that information to the real world. In this paper, we discuss how children's symbolic development, analogical reasoning, and reasoning about fantasy may constrain their ability to take away content information from picture books. We then review the nascent body of findings that has focused on the impact of picture book features on children's learning and transfer of words and letters, science concepts, problem solutions, and morals from picture books. In each domain of learning we discuss how children's development may interact with book features to impact their learning. We conclude that children's ability to learn and transfer content from picture books can be disrupted by some book features and research should directly examine the interaction between children's developing abilities and book characteristics on children's learning.

The Role of Book Features in Young Children's Transfer of Information from Picture Books to Real-World Contexts

Science.gov (United States)

Strouse, Gabrielle A.; Nyhout, Angela; Ganea, Patricia A.

2018-01-01

Picture books are an important source of new language, concepts, and lessons for young children. A large body of research has documented the nature of parent-child interactions during shared book reading. A new body of research has begun to investigate the features of picture books that support children's learning and transfer of that information to the real world. In this paper, we discuss how children's symbolic development, analogical reasoning, and reasoning about fantasy may constrain their ability to take away content information from picture books. We then review the nascent body of findings that has focused on the impact of picture book features on children's learning and transfer of words and letters, science concepts, problem solutions, and morals from picture books. In each domain of learning we discuss how children's development may interact with book features to impact their learning. We conclude that children's ability to learn and transfer content from picture books can be disrupted by some book features and research should directly examine the interaction between children's developing abilities and book characteristics on children's learning. PMID:29467690

The Role of Book Features in Young Children's Transfer of Information from Picture Books to Real-World Contexts

Directory of Open Access Journals (Sweden)

Gabrielle A. Strouse

2018-02-01

Full Text Available Picture books are an important source of new language, concepts, and lessons for young children. A large body of research has documented the nature of parent-child interactions during shared book reading. A new body of research has begun to investigate the features of picture books that support children's learning and transfer of that information to the real world. In this paper, we discuss how children's symbolic development, analogical reasoning, and reasoning about fantasy may constrain their ability to take away content information from picture books. We then review the nascent body of findings that has focused on the impact of picture book features on children's learning and transfer of words and letters, science concepts, problem solutions, and morals from picture books. In each domain of learning we discuss how children's development may interact with book features to impact their learning. We conclude that children's ability to learn and transfer content from picture books can be disrupted by some book features and research should directly examine the interaction between children's developing abilities and book characteristics on children's learning.

Market Analysis and Consumer Impacts Source Document. Part II. Review of Motor Vehicle Market and Consumer Expenditures on Motor Vehicle Transportation

Science.gov (United States)

1980-12-01

This source document on motor vehicle market analysis and consumer impacts consists of three parts. Part II consists of studies and review on: motor vehicle sales trends; motor vehicle fleet life and fleet composition; car buying patterns of the busi...

Clustering document fragments using background color and texture information

Science.gov (United States)

Chanda, Sukalpa; Franke, Katrin; Pal, Umapada

2012-01-01

Forensic analysis of questioned documents sometimes can be extensively data intensive. A forensic expert might need to analyze a heap of document fragments and in such cases to ensure reliability he/she should focus only on relevant evidences hidden in those document fragments. Relevant document retrieval needs finding of similar document fragments. One notion of obtaining such similar documents could be by using document fragment's physical characteristics like color, texture, etc. In this article we propose an automatic scheme to retrieve similar document fragments based on visual appearance of document paper and texture. Multispectral color characteristics using biologically inspired color differentiation techniques are implemented here. This is done by projecting document color characteristics to Lab color space. Gabor filter-based texture analysis is used to identify document texture. It is desired that document fragments from same source will have similar color and texture. For clustering similar document fragments of our test dataset we use a Self Organizing Map (SOM) of dimension 5×5, where the document color and texture information are used as features. We obtained an encouraging accuracy of 97.17% from 1063 test images.

Biopsychosocial impact of the voice in relation to the psychological features in female student teachers.

NARCIS (Netherlands)

Meulenbroek, L.F.P.; Thomas, G.; Kooijman, P.G.C.; Jong, F.I.C.R.S. de

2010-01-01

OBJECTIVE: The aim of the study was to assess biopsychosocial impact of the voice in relation to the psychological features in female student teachers. METHODS: This research was a cross-sectional study in 755 student teachers using general questionnaires, the Voice Handicap Inventory (VHI), Type D

Further Thoughts on "How Task Features Impact Evidence from Assessments Embedded in Simulations and Games"

Science.gov (United States)

Oliveri, María Elena; Khan, Saad

2014-01-01

María Oliveri, and Saad Khan write that the article: "How Task Features Impact Evidence from Assessments Embedded in Simulations and Games" provided helpful illustrations regarding the implementation of evidence-centered assessment design (Mislevy & Haertel, 2006; Mislevy, Steinberg, & Almond, 1999) with games and simulations.…

XML documents cluster research based on frequent subpatterns

Science.gov (United States)

Ding, Tienan; Li, Wei; Li, Xiongfei

2015-12-01

XML data is widely used in the information exchange field of Internet, and XML document data clustering is the hot research topic. In the XML document clustering process, measure differences between two XML documents is time costly, and impact the efficiency of XML document clustering. This paper proposed an XML documents clustering method based on frequent patterns of XML document dataset, first proposed a coding tree structure for encoding the XML document, and translate frequent pattern mining from XML documents into frequent pattern mining from string. Further, using the cosine similarity calculation method and cohesive hierarchical clustering method for XML document dataset by frequent patterns. Because of frequent patterns are subsets of the original XML document data, so the time consumption of XML document similarity measure is reduced. The experiment runs on synthetic dataset and the real datasets, the experimental result shows that our method is efficient.

Impact of SLA assimilation in the Sicily Channel Regional Model: model skills and mesoscale features

Directory of Open Access Journals (Sweden)

A. Olita

2012-07-01

Full Text Available The impact of the assimilation of MyOcean sea level anomalies along-track data on the analyses of the Sicily Channel Regional Model was studied. The numerical model has a resolution of 1/32° degrees and is capable to reproduce mesoscale and sub-mesoscale features. The impact of the SLA assimilation is studied by comparing a simulation (SIM, which does not assimilate data with an analysis (AN assimilating SLA along-track multi-mission data produced in the framework of MyOcean project. The quality of the analysis was evaluated by computing RMSE of the misfits between analysis background and observations (sea level before assimilation. A qualitative evaluation of the ability of the analyses to reproduce mesoscale structures is accomplished by comparing model results with ocean colour and SST satellite data, able to detect such features on the ocean surface. CTD profiles allowed to evaluate the impact of the SLA assimilation along the water column. We found a significant improvement for AN solution in terms of SLA RMSE with respect to SIM (the averaged RMSE of AN SLA misfits over 2 years is about 0.5 cm smaller than SIM. Comparison with CTD data shows a questionable improvement produced by the assimilation process in terms of vertical features: AN is better in temperature while for salinity it gets worse than SIM at the surface. This suggests that a better a-priori description of the vertical error covariances would be desirable. The qualitative comparison of simulation and analyses with synoptic satellite independent data proves that SLA assimilation allows to correctly reproduce some dynamical features (above all the circulation in the Ionian portion of the domain and mesoscale structures otherwise misplaced or neglected by SIM. Such mesoscale changes also infer that the eddy momentum fluxes (i.e. Reynolds stresses show major changes in the Ionian area. Changes in Reynolds stresses reflect a different pumping of eastward momentum from the eddy to

SANSMIC design document.

Energy Technology Data Exchange (ETDEWEB)

Weber, Paula D. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Rudeen, David Keith [GRAM, Inc., Albuquerque, NM (United States)

2015-07-01

The United States Strategic Petroleum Reserve (SPR) maintains an underground storage system consisting of caverns that were leached or solution mined in four salt domes located near the Gulf of Mexico in Texas and Louisiana. The SPR comprises more than 60 active caverns containing approximately 700 million barrels of crude oil. Sandia National Labo- ratories (SNL) is the geotechnical advisor to the SPR. As the most pressing need at the inception of the SPR was to create and fill storage volume with oil, the decision was made to leach the caverns and fill them simultaneously (leach-fill). Therefore, A.J. Russo developed SANSMIC in the early 1980s which allows for a transient oil-brine interface (OBI) making it possible to model leach-fill and withdrawal operations. As the majority of caverns are currently filled to storage capacity, the primary uses of SANSMIC at this time are related to the effects of small and large withdrawals, expansion of existing caverns, and projecting future pillar to diameter ratios. SANSMIC was identified by SNL as a priority candidate for qualification. This report continues the quality assurance (QA) process by documenting the "as built" mathematical and numerical models that comprise this document. The pro- gram flow is outlined and the models are discussed in detail. Code features that were added later or were not documented previously have been expounded. No changes in the code's physics have occurred since the original documentation (Russo, 1981, 1983) although recent experiments may yield improvements to the temperature and plume methods in the future.

The impact of mental disorders on the development of nosological features of gelotophobia, gelotophilia and katagelasticism

Directory of Open Access Journals (Sweden)

O. M. Shportun

2015-12-01

Full Text Available Scientific psychological studies, which are provided in recent years, indicate lack of coverage of humour disorders as an emotion. Aim. In order to explore and discover the nosological features of gelotophobia, gelotophilia, katagelasticism, in 81 men and 50 women, 142 patients with mental disorders were included. Methods and results. Features of influence of diagnosis, gender, as well as symptoms of mental disorders on the development of gelotophobia, gelotophilia, katagelasticism were studied. The following methods were used: 1 a Russian-language version of the gelotophobia scale GELOPH-15; 2 Methodology of PhoPhiKat-45; 3 Gelotophobia scale GELOPH-15; 4 Picture Test Picture-GELOPH. The psychometric and factor analyses of data were also used. It was distinguished that the main factors in forming the main nosological features are: gender and diagnosis, that allow considering separately the impact of sexual differences and nosological specifics, as well as the impact of mental disorders symptoms on the development of gelotophobia, gelotophilia, katagelasticism. Conclusion. It indicates that the specificity of the manifestations of gelotophobia, gelotophilia, katagelasticism can be seen as indicators of the depth of the violation of human mental activity.

Old TNX Seepage Basin: Environmental information document

International Nuclear Information System (INIS)

Dunaway, J.K.; Johnson, W.F.; Kingley, L.E.; Simmons, R.V.; Bledsoe, H.W.; Smith, J.A.

1986-12-01

This document provides environmental information on postulated closure options for the Old TNX Seepage Basin at the Savannah River Plant and was developed as background technical documentation for the Department of Energy's proposed Environmental Impact Statement (EIS) on waste management activities for groundwater protection at the plant. The results of groundwater and atmospheric pathway analyses, accident analysis, and other environmental assessments discussed in this document are based upon a conservative analysis of all foreseeable scenarios as defined by the National Environmental Policy Act (40 CFR 1500-1508). The scenarios do not necessarily represent actual environmental conditions. This document is not meant to be used as a regulatory closure plan or other regulatory document to comply with required federal or state environmental regulations

Supplemental design requirements document, Project W026

International Nuclear Information System (INIS)

Weidert, J.R.

1993-01-01

This document supplements and extends the Functional Design Criteria, SP-W026-FDC-001, for the Waste Receiving and Processing Facility (WRAP), Module 1. It provides additional detailed requirements, summarizes key Westinghouse Hanford Company design guidance, and establishes baseline technical agreements to be used in definitive design of the WRAP-1 facility. Revision 3 of the Supplemental Design Requirements Document has been assigned an Impact Level of 3ESQ based on the content of the entire revision. The actual changes made from Revision 2 have an Impact Level of 3S and the basis for these changes was previously reviewed and approved per WHC correspondence No. 9355770

Dental Implant Macro-Design Features Can Impact the Dynamics of Osseointegration.

Science.gov (United States)

Vivan Cardoso, Marcio; Vandamme, Katleen; Chaudhari, Amol; De Rycker, Judith; Van Meerbeek, Bart; Naert, Ignace; Duyck, Joke

2015-08-01

The purpose of this study was to compare the clinical performance of two dental implant types possessing a different macro-design in the in vivo pig model. Titanium Aadva(TM) implants (GC, Tokyo, Japan) were compared with OsseoSpeed(TM) implants (Astra, Mölndal, Sweden), with the Aadva implant displaying significant larger inter-thread dimensions than the OsseoSpeed implant. Implants were installed in the parietal bone of 12 domestic pigs and left for healing for either 1 or 3 months. Implant osseointegration was evaluated by quantitative histology (bone volume relative to the tissue volume [BV/TV]; bone-to-implant contact [BIC]) for distinct implant regions (collar, body, total implant length) with specific implant thread features. The Wilcoxon-Mann-Whitney nonparametric test with α = 0.05 was performed. An inferior amount of bone enveloping the Aadva implant compared with the OsseoSpeed implant was observed, in particular at the implant body part with its considerable inter-thread gaps (p macro-design negatively affected the amount of bone in direct contact with the implant for this specific implant part (p implant osseointegration at the initial healing stage (total implant length; 1-month healing; p implant displayed a clinically acceptable level of osseointegration, the findings demonstrate that implant macro-design features can impact the dynamics of implant osseointegration. Consideration of specific implant macro-design features should be made relative to the biological and mechanical microenvironment. © 2013 Wiley Periodicals, Inc.

ON EXPERIENCE OF THE ELECTRONIC DOCUMENT MANAGEMENT SYSTEM IMPLEMENTATION IN THE MEDICAL UNIVERSITY

OpenAIRE

A. V. Semenets; V. Yu. Kovalok

2015-01-01

An importance of the application of the electronic document management to the Ukraine healthcare is shown. The electronic document management systems market overview is presented. Example of the usage of the open-source electronic document management system in the Ternopil State Medical University by I. Ya. Horbachevsky is shown. The implementation capabilities of the electronic document management system within a cloud services are shown. The electronic document management features of the Mi...

Radiographic features of paediatric pneumocystis pneumonia - a historical perspective

Energy Technology Data Exchange (ETDEWEB)

Pitcher, R.D. [Division of Paediatric Radiology, Red Cross War Memorial Children' s Hospital, School of Child and Adolescent Health, University of Cape Town, Cape Town (South Africa)], E-mail: pitcher@iafrica.com; Zar, H.J. [Department of Paediatric Pulmonology, Red Cross War Memorial Children' s Hospital, School of Child and Adolescent Health, University of Cape Town, Cape Town (South Africa)

2008-06-15

Aim: To determine differences between the plain radiographic features of paediatric pneumocystis pneumonia (PCP) recorded before the emergence of human immunodeficiency virus (HIV) in 1982 and those documented in the HIV era. To establish differences in the radiographic features of PCP documented in HIV-infected children in developed and developing countries. Method: A Medline search of articles was conducted from 1950 to 2006, using the terms 'pneumocystis pneumonia in children' and 'chest radiographic features' or 'bilateral opacification' or 'lobar consolidation' or 'asymmetrical opacification' or 'pneumatocoeles' or 'cavities' or 'pneumothorax' or 'pneumomediastinum' or 'pleural effusion' or 'mediastinal adenopathy' or 'nodules' or 'normal chest radiography'. Appropriate articles were retrieved, radiological data extracted, reference lists examined and hand searches of referenced articles conducted. Results: Diffuse bilateral 'ground-glass' or alveolar pulmonary opacification, which may show some asymmetry, has been consistently documented as the commonest radiographic finding in childhood PCP throughout the period under review. The less common radiological features of PCP in children are similar to those in adults. In developed countries, PCP-related pulmonary air cysts have been reported at an earlier age in HIV-infected children, compared with uninfected children. PCP-related air cysts, pneumothorax, and pneumomediastinum have been reported in children in developed but not in developing countries. Conclusion: The radiological features of paediatric PCP documented before the HIV epidemic are similar to those recorded in the HIV era. Further study of the determinants of the uncommon radiographic features in children is warranted.

XML and its impact on content and structure in electronic health care documents.

Science.gov (United States)

Sokolowski, R.; Dudeck, J.

1999-01-01

Worldwide information networks have the requirement that electronic documents must be easily accessible, portable, flexible and system-independent. With the development of XML (eXtensible Markup Language), the future of electronic documents, health care informatics and the Web itself are about to change. The intent of the recently formed ASTM E31.25 subcommittee, "XML DTDs for Health Care", is to develop standard electronic document representations of paper-based health care documents and forms. A goal of the subcommittee is to work together to enhance existing levels of interoperability among the various XML/SGML standardization efforts, products and systems in health care. The ASTM E31.25 subcommittee uses common practices and software standards to develop the implementation recommendations for XML documents in health care. The implementation recommendations are being developed to standardize the many different structures of documents. These recommendations are in the form of a set of standard DTDs, or document type definitions that match the electronic document requirements in the health care industry. This paper discusses recent efforts of the ASTM E31.25 subcommittee. PMID:10566338

Epistolary Documents in High-Medieval History-Writing

DEFF Research Database (Denmark)

Bainton, Henry

2018-01-01

This article focuses on the way history-writers in the reign of King Henry II (King of England, Duke of Normandy and of Aquitaine, and Count of Anjou, d. 1189) quoted documents in their histories. Although scholars have often identified documentary quotation as the most distinctive feature...

The Influence of a Policy Document in the Practice of Intersectorial Collaboration in Danish Health Care

DEFF Research Database (Denmark)

Andersen, Anne Bendix; Beedholm, Kirsten; Kolbæk, Raymond

. The linguistic analysis of grammatical features present in the document enabled us to demonstrate how the authors of Health Agreements apply governing technologies to control the delivery of intersectorial health care in Denmark. Furthermore, the findings showed how this policy document, through its use......Background Policy documents are powerful actors in health care, and they play a significant role because they produce certain discursive and non-discursive conditions for intersectorial collaboration. Central documents in Denmark are the Health Agreements. These policy documents set out...... assess a policy document. Method A critical discourse analysis based on a three-dimensional model. Findings Our analysis showed how wordings and grammatical features create and maintain certain perceptions or common-sense understandings of actors, responsibilities, and tasks in health care...

Document recognition serving people with disabilities

Science.gov (United States)

Fruchterman, James R.

2007-01-01

Document recognition advances have improved the lives of people with print disabilities, by providing accessible documents. This invited paper provides perspectives on the author's career progression from document recognition professional to social entrepreneur applying this technology to help people with disabilities. Starting with initial thoughts about optical character recognition in college, it continues with the creation of accurate omnifont character recognition that did not require training. It was difficult to make a reading machine for the blind in a commercial setting, which led to the creation of a nonprofit social enterprise to deliver these devices around the world. This network of people with disabilities scanning books drove the creation of Bookshare.org, an online library of scanned books. Looking forward, the needs for improved document recognition technology to further lower the barriers to reading are discussed. Document recognition professionals should be proud of the positive impact their work has had on some of society's most disadvantaged communities.

Magnetic fusion: Environmental Readiness Document

International Nuclear Information System (INIS)

1981-03-01

Environmental Readiness Documents are prepared periodically to review and evaluate the environmental status of an energy technology during the several phases of development of that technology. Through these documents, the Office of Environment within the Department of Energy provides an independent and objective assessment of the environmental risks and potential impacts associated with the progression of the technology to the next stage of development and with future extensive use of the technology. This Environmental Readiness Document was prepared to assist the Department of Energy in evaluating the readiness of magnetic fusion technology with respect to environmental issues. An effort has been made to identify potential environmental problems that may be encountered based upon current knowledge, proposed and possible new environmental regulations, and the uncertainties inherent in planned environmental research

Multisource data fusion for documenting archaeological sites

Science.gov (United States)

Knyaz, Vladimir; Chibunichev, Alexander; Zhuravlev, Denis

2017-10-01

The quality of archaeological sites documenting is of great importance for cultural heritage preserving and investigating. The progress in developing new techniques and systems for data acquisition and processing creates an excellent basis for achieving a new quality of archaeological sites documenting and visualization. archaeological data has some specific features which have to be taken into account when acquiring, processing and managing. First of all, it is a needed to gather as full as possible information about findings providing no loss of information and no damage to artifacts. Remote sensing technologies are the most adequate and powerful means which satisfy this requirement. An approach to archaeological data acquiring and fusion based on remote sensing is proposed. It combines a set of photogrammetric techniques for obtaining geometrical and visual information at different scales and detailing and a pipeline for archaeological data documenting, structuring, fusion, and analysis. The proposed approach is applied for documenting of Bosporus archaeological expedition of Russian State Historical Museum.

Establishing Trustworthiness When Students Read Multiple Documents Containing Conflicting Scientific Evidence

Science.gov (United States)

Bråten, Ivar; Braasch, Jason L. G.; Strømsø, Helge I.; Ferguson, Leila E.

2015-01-01

Students read six documents that varied in terms of their perspectives on a scientific issue and the trustworthiness of the source features. After reading, students wrote essays, rank-ordered the documents according to perceived trustworthiness, and provided reasons for their rank-order decisions. Students put the most trust in a textbook and a…

Hurricane impacts on coastal wetlands: a half-century record of storm-generated features from southern Louisiana

Science.gov (United States)

Morton, Robert A.; Barras, John A.

2011-01-01

Temporally and spatially repeated patterns of wetland erosion, deformation, and deposition are observed on remotely sensed images and in the field after hurricanes cross the coast of Louisiana. The diagnostic morphological wetland features are products of the coupling of high-velocity wind and storm-surge water and their interaction with the underlying, variably resistant, wetland vegetation and soils. Erosional signatures include construction of orthogonal-elongate ponds and amorphous ponds, pond expansion, plucked marsh, marsh denudation, and shoreline erosion. Post-storm gravity reflux of floodwater draining from the wetlands forms dendritic incisions around the pond margins and locally integrates drainage pathways forming braided channels. Depositional signatures include emplacement of broad zones of organic wrack on topographic highs and inorganic deposits of variable thicknesses and lateral extents in the form of shore-parallel sandy washover terraces and interior-marsh mud blankets. Deformational signatures primarily involve laterally compressed marsh and displaced marsh mats and balls. Prolonged water impoundment and marsh salinization also are common impacts associated with wetland flooding by extreme storms. Many of the wetland features become legacies that record prior storm impacts and locally influence subsequent storm-induced morphological changes. Wetland losses caused by hurricane impacts depend directly on impact duration, which is controlled by the diameter of hurricane-force winds, forward speed of the storm, and wetland distance over which the storm passes. Distinguishing between wetland losses caused by storm impacts and losses associated with long-term delta-plain processes is critical for accurate modeling and prediction of future conversion of land to open water.

GENIE-V3 concepts document

International Nuclear Information System (INIS)

Moreton-Smith, C.M.

1990-01-01

The GENIE data analysis program is a program used for analysis of data from the ISIS neutron scattering instruments. The current version, GENIE-V2, is now being re-written to provide a much more powerful data analysis system for the next major version of the program, GENIE-V3. The purpose of this ''Concepts Document'' is to establish a frame of reference within which to discuss the development of GENIE-V3. It does not seek to define everything which will be implemented in the new version of the GENIE program. A substantial amount of design effort has been expended to produce a plausible design for the language and operation of GENIE-V3. Having said this, this is in no way a complete specification. Several features (although intended for any working version of GENIE-V3) have not been documented here, hopefully though, nothing material has been left out. To keep this document to a reasonable length, commands which can be written using GENIE-V3 are omitted. (author)

SIMS chemical analysis of extended impact features from the trailing edge portion of experiment AO187-2

Science.gov (United States)

Amari, Sachiko; Foote, John; Simon, Charles; Jessberger, Elmar K.; Lange, Gundolf; Stadermann, Frank; Swan, Pat; Walker, Robert M.; Zinner, Ernst

1992-01-01

One hundred capture cells from the trailing edge, which had lost their cover foils during flight, were optically scanned for extended impact features caused by high velocity projectiles impinging on the cells while the foils were still intact. Of the 53 candidates, 24 impacts were analyzed by secondary ion mass spectroscopy for the chemical composition of the deposits. Projectile material was found in all impacts, and at least 75 percent of them appear to be caused by interplanetary dust particles. Elemental ratios are fractionated, with refractory elements enriched in the impacts relative to interplanetary dust particles collected in the stratosphere. Although this could be due to systematic differences in the compositions, a more likely explanation is volatility fractionation during the impact process.

2011 Addendum to the SNL/NM SWEIS Supplemental Information Source Documents

Energy Technology Data Exchange (ETDEWEB)

Dimmick, Ross [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2014-12-01

This document contains updates to the Supplemental Information Sandia National Laboratories/New Mexico Site-Wide Environmental Impact Statement Source Documents that were developed in 2010. In general, this addendum provides calendar year 2010 data, along with changes or additions to text in the original documents.

Improving documentation of a beta-blocker quality measure through an anesthesia information management system and real-time notification of documentation errors.

Science.gov (United States)

Nair, Bala G; Peterson, Gene N; Newman, Shu-Fang; Wu, Wei-Ying; Kolios-Morris, Vickie; Schwid, Howard A

2012-06-01

Continuation of perioperative beta-blockers for surgical patients who are receiving beta-blockers prior to arrival for surgery is an important quality measure (SCIP-Card-2). For this measure to be considered successful, name, date, and time of the perioperative beta-blocker must be documented. Alternately, if the beta-blocker is not given, the medical reason for not administering must be documented. Before the study was conducted, the institution lacked a highly reliable process to document the date and time of self-administration of beta-blockers prior to hospital admission. Because of this, compliance with the beta-blocker quality measure was poor (-65%). To improve this measure, the anesthesia care team was made responsible for documenting perioperative beta-blockade. Clear documentation guidelines were outlined, and an electronic Anesthesia Information Management System (AIMS) was configured to facilitate complete documentation of the beta-blocker quality measure. In addition, real-time electronic alerts were generated using Smart Anesthesia Messenger (SAM), an internally developed decision-support system, to notify users concerning incomplete beta-blocker documentation. Weekly compliance for perioperative beta-blocker documentation before the study was 65.8 +/- 16.6%, which served as the baseline value. When the anesthesia care team started documenting perioperative beta-blocker in AIMS, compliance was 60.5 +/- 8.6% (p = .677 as compared with baseline). Electronic alerts with SAM improved documentation compliance to 94.6 +/- 3.5% (p documentation and (2) enhance features in the electronic medical systems to alert the user concerning incomplete documentation.

Modular Integrated Stackable Layers (MISL) MI_MSP430A Board Design Document (BDD)

Science.gov (United States)

Yim, Hester

2013-01-01

This is a board-level design document for Modular Integrated Stackable Layers (MISL) MI_MSP430A board (PIN MSP430F5438A). The Board Design Document (BDD) contains the description, features of microcontroller, electrical and mechanical design, and drawings.

Key Features of Electric Vehicle Diffusion and Its Impact on the Korean Power Market

Directory of Open Access Journals (Sweden)

Dongnyok Shim

2018-06-01

Full Text Available The market share of electric vehicles is growing and the interest in these vehicles is rapidly increasing in industrialized countries. In the light of these circumstances, this study provides an integrated policy-making package, which includes key features for electric vehicle diffusion and its impact on the Korean power market. This research is based on a quantitative analysis with the following steps: (1 it analyzes drivers’ preferences for electric or traditional internal combustion engine (ICE vehicles with respect to key automobile attributes and these key attributes indicate what policy makers should focus on; (2 it forecasts the achievable level of market share of electric vehicles in relation to improvements in their key attributes; and (3 it evaluates the impact of electric vehicle diffusion on the Korean power market based on an achievable level of market share with different charging demand profiles. Our results reveal the market share of electric vehicles can increase to around 40% of the total market share if the key features of electric vehicles reach a similar level to those of traditional vehicles. In this estimation, an increase in the power market’s system generation costs will reach around 10% of the cost in the baseline scenario, which differs slightly depending on charging demand profiles.

32 CFR 989.11 - Combining EIAP with other documentation.

Science.gov (United States)

2010-07-01

... documentation. (a) The EPF combines environmental analysis with other related documentation when practicable (40 CFR 1506.4) following the procedures prescribed by the CEQ regulations and this part. (b) The EPF must... the EIAP. Prior to making a decision to proceed, the EPF must analyze the environmental impacts that...

Stamp Verification for Automated Document Authentication

DEFF Research Database (Denmark)

Micenková, Barbora; van Beusekom, Joost; Shafait, Faisal

Stamps, along with signatures, can be considered as the most widely used extrinsic security feature in paper documents. In contrast to signatures, however, for stamps little work has been done to automatically verify their authenticity. In this paper, an approach for verification of color stamps ...... and copied stamps. Sensitivity and specificity of up to 95% could be obtained on a data set that is publicly available....

ON EXPERIENCE OF THE ELECTRONIC DOCUMENT MANAGEMENT SYSTEM IMPLEMENTATION IN THE MEDICAL UNIVERSITY

Directory of Open Access Journals (Sweden)

A. V. Semenets

2015-05-01

Full Text Available An importance of the application of the electronic document management to the Ukraine healthcare is shown. The electronic document management systems market overview is presented. Example of the usage of the open-source electronic document management system in the Ternopil State Medical University by I. Ya. Horbachevsky is shown. The implementation capabilities of the electronic document management system within a cloud services are shown. The electronic document management features of the Microsoft Office 365 and Google Apps For Education are compared. Some results of the usage of the Google Apps For Education inTSMUas electronic document management system are presented.

FacetGist: Collective Extraction of Document Facets in Large Technical Corpora.

Science.gov (United States)

Siddiqui, Tarique; Ren, Xiang; Parameswaran, Aditya; Han, Jiawei

2016-10-01

Given the large volume of technical documents available, it is crucial to automatically organize and categorize these documents to be able to understand and extract value from them. Towards this end, we introduce a new research problem called Facet Extraction. Given a collection of technical documents, the goal of Facet Extraction is to automatically label each document with a set of concepts for the key facets ( e.g. , application, technique, evaluation metrics, and dataset) that people may be interested in. Facet Extraction has numerous applications, including document summarization, literature search, patent search and business intelligence. The major challenge in performing Facet Extraction arises from multiple sources: concept extraction, concept to facet matching, and facet disambiguation. To tackle these challenges, we develop FacetGist, a framework for facet extraction. Facet Extraction involves constructing a graph-based heterogeneous network to capture information available across multiple local sentence-level features, as well as global context features. We then formulate a joint optimization problem, and propose an efficient algorithm for graph-based label propagation to estimate the facet of each concept mention. Experimental results on technical corpora from two domains demonstrate that Facet Extraction can lead to an improvement of over 25% in both precision and recall over competing schemes.

Shoulder dystocia: management and documentation.

Science.gov (United States)

Stitely, Michael L; Gherman, Robert B

2014-06-01

Shoulder dystocia is an obstetric emergency that occurs when the fetal shoulders become impacted at the pelvic inlet. Management is based on performing maneuvers to alleviate this impaction. A number of protocols and training mnemonics have been developed to assist in managing shoulder dystocia when it occurs. This article reviews the evidence regarding the performance, timing, and sequence of these maneuvers; reviews the mechanism of fetal injury in relation to shoulder dystocia; and discusses issues concerning documentation of the care provided during this obstetric emergency. Copyright © 2014 Elsevier Inc. All rights reserved.

Light Duty Utility Arm interface control document plan

Energy Technology Data Exchange (ETDEWEB)

Engstrom, J.W.

1994-12-27

This document describes the interface control documents that will be used to identify and control interface features throughout all phases of the Light Duty Utility Arm (LDUA) development and design. After the system is built, delivered and installed in the Cold Test Facility and later at the tank farm, the Interface Control Documents can be used in maintaining the configuration control process. The Interface Control Document will consist of Interface Control Drawings and a data base directly tied to the Interface Control Drawings. The data base can be used as an index to conveniently find interface information. Design drawings and other text documents that contain interface information will appear in the database. The Interface Control Drawings will be used to document and control the data and information that define the interface boundaries between systems, subsystems and equipment. Also, the interface boundaries will define the areas of responsibility for systems and subsystems. The drawing will delineate and identify all the physical and functional interfaces that required coordination to establish and maintain compatibility between the co-functioning equipment, computer software, and the tank farm facilities. An appendix contains the Engineering interface control database system riser manual.

Light Duty Utility Arm interface control document plan

International Nuclear Information System (INIS)

Engstrom, J.W.

1994-01-01

This document describes the interface control documents that will be used to identify and control interface features throughout all phases of the Light Duty Utility Arm (LDUA) development and design. After the system is built, delivered and installed in the Cold Test Facility and later at the tank farm, the Interface Control Documents can be used in maintaining the configuration control process. The Interface Control Document will consist of Interface Control Drawings and a data base directly tied to the Interface Control Drawings. The data base can be used as an index to conveniently find interface information. Design drawings and other text documents that contain interface information will appear in the database. The Interface Control Drawings will be used to document and control the data and information that define the interface boundaries between systems, subsystems and equipment. Also, the interface boundaries will define the areas of responsibility for systems and subsystems. The drawing will delineate and identify all the physical and functional interfaces that required coordination to establish and maintain compatibility between the co-functioning equipment, computer software, and the tank farm facilities. An appendix contains the Engineering interface control database system riser manual

Guidelines for the documentation of digital computer programs - approved 1974

International Nuclear Information System (INIS)

Anon.

1975-01-01

This standard presents guidelines for the documentation of engineering and scientific computer programs. Good documentation promotes understanding, reduces duplication of effort, eases conversion to different computer environments and aids modification for extended applications. Good documentation is essential for implementation and effective use of programs obtained from other installations. Since the intention of this standard is to encourage better communication between the developer and user, it should be regarded as a guide rather than a set of rigid specifications. As a guide, it is sufficiently comprehensive to apply to large-scale programs intended for extensive external use. Not all features of this document are appropriate in all circumstances. In general, as the project complexity increases so does the need for more complete documentation. An organization may have special documentation requirements which supersede or extend these guidelines. This standard is a revision of ANS-STD.2-1967 and supersedes it

Ballistic Impact Testing of Aluminum 2024 and Titanium 6Al-4V for Material Model Development

Science.gov (United States)

Pereira, J. Michael; Revilock, Duane M.; Ruggeri, Charles R.; Emmerling, William C.; Altobelli, Donald J.

2012-01-01

An experimental program is underway to develop a consistent set of material property and impact test data, and failure analysis, for a variety of materials that can be used to develop improved impact failure and deformation models. Unique features of this set of data are that all material property information and impact test results are obtained using identical materials, the test methods and procedures are extensively documented and all of the raw data is available. This report describes ballistic impact testing which has been conducted on aluminum (Al) 2024 and titanium (Ti) 6Al-4vanadium (V) sheet and plate samples of different thicknesses and with different types of projectiles, one a regular cylinder and one with a more complex geometry incorporating features representative of a jet engine fan blade.

License Application Design Selection Feature Report: Waste Package Self Shielding Design Feature 13

International Nuclear Information System (INIS)

Tang, J.S.

2000-01-01

In the Viability Assessment (VA) reference design, handling of waste packages (WPs) in the emplacement drifts is performed remotely, and human access to the drifts is precluded when WPs are present. This report will investigate the feasibility of using a self-shielded WP design to reduce the radiation levels in the emplacement drifts to a point that, when coupled with ventilation, will create an acceptable environment for human access. This provides the benefit of allowing human entry to emplacement drifts to perform maintenance on ground support and instrumentation, and carry out performance confirmation activities. More direct human control of WP handling and emplacement operations would also be possible. However, these potential benefits must be weighed against the cost of implementation, and potential impacts on pre- and post-closure performance of the repository and WPs. The first section of this report will provide background information on previous investigations of the self-shielded WP design feature, summarize the objective and scope of this document, and provide quality assurance and software information. A shielding performance and cost study that includes several candidate shield materials will then be performed in the subsequent section to allow selection of two self-shielded WP design options for further evaluation. Finally, the remaining sections will evaluate the impacts of the two WP self-shielding options on the repository design, operations, safety, cost, and long-term performance of the WPs with respect to the VA reference design

Camera trap placement and the potential for bias due to trails and other features.

Science.gov (United States)

Kolowski, Joseph M; Forrester, Tavis D

2017-01-01

Camera trapping has become an increasingly widespread tool for wildlife ecologists, with large numbers of studies relying on photo capture rates or presence/absence information. It is increasingly clear that camera placement can directly impact this kind of data, yet these biases are poorly understood. We used a paired camera design to investigate the effect of small-scale habitat features on species richness estimates, and capture rate and detection probability of several mammal species in the Shenandoah Valley of Virginia, USA. Cameras were deployed at either log features or on game trails with a paired camera at a nearby random location. Overall capture rates were significantly higher at trail and log cameras compared to their paired random cameras, and some species showed capture rates as much as 9.7 times greater at feature-based cameras. We recorded more species at both log (17) and trail features (15) than at their paired control cameras (13 and 12 species, respectively), yet richness estimates were indistinguishable after 659 and 385 camera nights of survey effort, respectively. We detected significant increases (ranging from 11-33%) in detection probability for five species resulting from the presence of game trails. For six species detection probability was also influenced by the presence of a log feature. This bias was most pronounced for the three rodents investigated, where in all cases detection probability was substantially higher (24.9-38.2%) at log cameras. Our results indicate that small-scale factors, including the presence of game trails and other features, can have significant impacts on species detection when camera traps are employed. Significant biases may result if the presence and quality of these features are not documented and either incorporated into analytical procedures, or controlled for in study design.

Content Documents Management

Science.gov (United States)

Muniz, R.; Hochstadt, J.; Boelke J.; Dalton, A.

2011-01-01

The Content Documents are created and managed under the System Software group with. Launch Control System (LCS) project. The System Software product group is lead by NASA Engineering Control and Data Systems branch (NEC3) at Kennedy Space Center. The team is working on creating Operating System Images (OSI) for different platforms (i.e. AIX, Linux, Solaris and Windows). Before the OSI can be created, the team must create a Content Document which provides the information of a workstation or server, with the list of all the software that is to be installed on it and also the set where the hardware belongs. This can be for example in the LDS, the ADS or the FR-l. The objective of this project is to create a User Interface Web application that can manage the information of the Content Documents, with all the correct validations and filters for administrator purposes. For this project we used one of the most excellent tools in agile development applications called Ruby on Rails. This tool helps pragmatic programmers develop Web applications with Rails framework and Ruby programming language. It is very amazing to see how a student can learn about OOP features with the Ruby language, manage the user interface with HTML and CSS, create associations and queries with gems, manage databases and run a server with MYSQL, run shell commands with command prompt and create Web frameworks with Rails. All of this in a real world project and in just fifteen weeks!

Island-specific preferences of tourists for environmental features: implications of climate change for tourism dependent states

Energy Technology Data Exchange (ETDEWEB)

Uyarra, M.C.; Cote, I.M. [East Anglia Univ., Norwich (United Kingdom). Centre for Ecology, Evolution and Conservation; Gill, J.A. [East Anglia Univ., Norwich (United Kingdom). School of Environmental Sciences; Tyndall Centre for Climate Change Research, Norwich (United Kingdom); Tinch, R.T. [East Anglia Univ., Norwich (United Kingdom). School of Environmental Sciences; Macaulay Land Use Research Inst., Aberdeen (United Kingdom); Viner, D. [East Anglia Univ., Norwich (United Kingdom). Climate Research Unit; Watkinson, A.R. [East Anglia Univ., Norwich (United Kingdom). Centre for Ecology, Evolution and Conservation; East Anglia Univ., Norwich (United Kingdom). School of Environmental Sciences

2005-03-15

Climate change may affect important environmental components of holiday destinations, which might have repercussions for tourism-dependent economies. This study documents the importance of environmental attributes in determining the choice and holiday enjoyment of tourists visiting Bonaire and Barbados, two Caribbean islands with markedly different tourism markets and infrastructure. Three hundred and sixteen and 338 participants from Bonaire and Barbados, respectively, completed standardized questionnaires. Warm temperatures, clear waters and low health risks were the most important environmental features determining holiday destination choice. However, tourists in Bonaire thereafter prioritized marine wildlife attributes (i.e. coral and fish diversity and abundance) over other environmental features, whereas tourists in Barbados exhibited stronger preferences for terrestrial features, particularly beach characteristics. The willingness of tourists to revisit these islands was strongly linked to the state of the preferred environmental attributes. More than 80% of tourists in Bonaire and Barbados would be unwilling to return for the same holiday price in the event, respectively, of coral bleaching as a result of elevated sea surface temperatures and reduced beach area as a result of sea level rise. Climate change might have a significant impact on Caribbean tourism economy through alteration of environmental features important to destination selection. Island-specific management strategies, such as focusing resources on the protection of key marine or terrestrial features, may provide a means of reducing the environmental and economic impacts of climate change. (author)

Documentation requirements for radiation sterilization

DEFF Research Database (Denmark)

Miller, A.

1995-01-01

Several standards are recently approved or are under development by the standard organizations ISO and CEN in the field of radiation sterilization. Particularly in Europe these standards define new requirements on some issues and on other issues they emphasize the necessary documentation for appr......Several standards are recently approved or are under development by the standard organizations ISO and CEN in the field of radiation sterilization. Particularly in Europe these standards define new requirements on some issues and on other issues they emphasize the necessary documentation...... for approval of radiation sterilized products. The impact of these standards on the radiation sterilization is discussed, with special attention given to a few special issues, mainly traceability and uncertainty of measurement results....

Impact of National Physical Activity and Health Guidelines and Documents on Research on Teaching K-12 Physical Education in U.S.A.

Science.gov (United States)

Li, Weidong; Xiang, Ping; Gao, Zan; Shen, Bo; Yin, Zhihua; Kong, Qingtao

2016-01-01

Purpose: This study examined the impact of published national physical activity (PA) and health guidelines, documents, and initiatives on the evolution of research on teaching K-12 physical education (PE) in U.S.A. from 1996 to October 2013. Methods: A total of 262 peer-reviewed, data-based journal articles meeting our inclusion and exclusion…

SIMS chemical and isotopic analysis of impact features from LDEF experiments AO187-1 and AO187-2

Science.gov (United States)

Stadermann, Frank J.; Amari, Sachiko; Foote, John; Swan, Pat; Walker, Robert M.; Zinner, Ernst

1995-01-01

Previous secondary ion mass spectrometry (SIMS) studies of extended impact features from LDEF capture cell experiment AO187-2 showed that it is possible to distinguish natural and man-made particle impacts based on the chemical composition of projectile residues. The same measurement technique has now been applied to specially prepared gold target impacts from experiment AO187-1 in order to identify the origins of projectiles that left deposits too thin to be analyzed by conventional energy-dispersive x-ray (EDX) spectroscopy. The results indicate that SIMS may be the method of choice for the analysis of impact deposits on a variety of sample surfaces. SIMS was also used to determine the isotopic compositions of impact residues from several natural projectiles. Within the precision of the measurements all analyzed residues show isotopically normal compositions.

Assessment and Documentation Considerations for Postsecondary Students with Learning Disabilities

Science.gov (United States)

Lindstrom, Jennifer H.; Lindstrom, Will

2011-01-01

In order to gain access to accommodations and services at colleges and universities, students with learning disabilities must provide documentation of their disabilities, and as students with learning disabilities access higher education at increasing rates, the need for documentation of their disabilities and its impact becomes even more…

Document clustering methods, document cluster label disambiguation methods, document clustering apparatuses, and articles of manufacture

Science.gov (United States)

Sanfilippo, Antonio [Richland, WA; Calapristi, Augustin J [West Richland, WA; Crow, Vernon L [Richland, WA; Hetzler, Elizabeth G [Kennewick, WA; Turner, Alan E [Kennewick, WA

2009-12-22

Document clustering methods, document cluster label disambiguation methods, document clustering apparatuses, and articles of manufacture are described. In one aspect, a document clustering method includes providing a document set comprising a plurality of documents, providing a cluster comprising a subset of the documents of the document set, using a plurality of terms of the documents, providing a cluster label indicative of subject matter content of the documents of the cluster, wherein the cluster label comprises a plurality of word senses, and selecting one of the word senses of the cluster label.

M-Area Settling Basin and vicinity: Environmental information document

International Nuclear Information System (INIS)

Pickett, J.B.; Colven, W.P.; Bledsoe, H.W.

1986-12-01

This document provides environmental information on postulated closure options for the M-Area Settling Basin and vicinity at the Savannah River Plant and was developed as background technical documentation for the Department of Energy's proposed Environmental Impact Statement (EIS) on waste management activities for groundwater protection at the plant. The results of groundwater and atmospheric pathway analyses, accident analysis, and other environmental assessments discussed in this document are based upon a conservative analysis of all foreseeable scenarios as defined by the National Environmental Policy Act (40 CFR 1500-1508). The scenarios do not necessarily represent actual environmental conditions. This document is not meant to be used as a closure plan or other regulatory document to comply with required federal or state environmental regulations

CMP [Chemicals, Metals, and Pesticides] Pits: Environmental information document

International Nuclear Information System (INIS)

Scott, S.C.; Kolb, N.L.; Price, V.; Bledsoe, H.W.

1986-12-01

This document provides environmental information on postulated closure options for the Chemicals, Metals, and Pesticides (CMP) Pits at the Savannah River Plant and was developed as background technical documentation for the Department of Energy's proposed Environmental Impact Statement (EIS) on waste management activities for groundwater protection at the plant. The results of groundwater and atmospheric pathway analyses, accident analysis, and other environmental assessments discussed in this document are based upon a conservative analysis of all foreseeable scenarios as defined by the National Environmental Policy Act (40 CFR 1500-1508). The scenarios do not necessarily represent actual environmental conditions. This document is not meant to be used as a regulatory closure plan or other regulatory document to comply with required federal or state environmental regulations

L-Area Oil and Chemical Basin: Environmental information document

International Nuclear Information System (INIS)

Pekkala, R.O.; Price, V.; Bledsoe, H.W.

1986-12-01

This document provides environmental information on postulated closure options for the L-Area Oil and Chemical Basin at the Savannah River Plant and was developed as background technical documentation for the Department of Energy's proposed Environmental Impact Statement (EIS) on waste management activities for groundwater protection at the plant. The results of groundwater and atmospheric pathway analyses, accident analysis, and other environmental assessments discussed in this document are based upon a conservative analysis of all foreseeable scenarios as defined by the National Environmental Policy Act (40 CFR 1500-1508). The scenarios do not necessarily represent actual environmental conditions. This document is not meant to be used as a regulatory closure plan or other regulatory document to comply with required federal or state environmental regulations

Development document for best technology available for the location, design, construction, and capacity of cooling water intake structures for minimizing adverse environmental impact

International Nuclear Information System (INIS)

Train, R.E.; Breidenbach, A.W.; Hall, E.P.; Barnes, D.

1976-04-01

This document presents the findings of an extensive study of the available technology for the location, design construction and capacity of cooling water intake structures for minimizing adverse environmental impact, in compliance with and to implement Section 316(b) of the Federal Water Pollution Control Act Amendments of 1972

Classification of forensic autopsy reports through conceptual graph-based document representation model.

Science.gov (United States)

Mujtaba, Ghulam; Shuib, Liyana; Raj, Ram Gopal; Rajandram, Retnagowri; Shaikh, Khairunisa; Al-Garadi, Mohammed Ali

2018-06-01

Text categorization has been used extensively in recent years to classify plain-text clinical reports. This study employs text categorization techniques for the classification of open narrative forensic autopsy reports. One of the key steps in text classification is document representation. In document representation, a clinical report is transformed into a format that is suitable for classification. The traditional document representation technique for text categorization is the bag-of-words (BoW) technique. In this study, the traditional BoW technique is ineffective in classifying forensic autopsy reports because it merely extracts frequent but discriminative features from clinical reports. Moreover, this technique fails to capture word inversion, as well as word-level synonymy and polysemy, when classifying autopsy reports. Hence, the BoW technique suffers from low accuracy and low robustness unless it is improved with contextual and application-specific information. To overcome the aforementioned limitations of the BoW technique, this research aims to develop an effective conceptual graph-based document representation (CGDR) technique to classify 1500 forensic autopsy reports from four (4) manners of death (MoD) and sixteen (16) causes of death (CoD). Term-based and Systematized Nomenclature of Medicine-Clinical Terms (SNOMED CT) based conceptual features were extracted and represented through graphs. These features were then used to train a two-level text classifier. The first level classifier was responsible for predicting MoD. In addition, the second level classifier was responsible for predicting CoD using the proposed conceptual graph-based document representation technique. To demonstrate the significance of the proposed technique, its results were compared with those of six (6) state-of-the-art document representation techniques. Lastly, this study compared the effects of one-level classification and two-level classification on the experimental results

Ahmad's NPRT System: A Practical Innovation for Documenting Male Pattern Baldness

OpenAIRE

Ahmad, Muhammad

2016-01-01

Various classifications for male pattern baldness are mentioned in the literature. The 'Norwood's classification is the most commonly used but it has certain limitations. The new system has included 'three' extra features which were not mentioned in any other classification. It provides an opportunity to document the full and correct picture while documenting male pattern baldness. It also aids in assessing the treatment for various degrees of baldness.

Ahmad's NPRT system: A practical innovation for documenting male pattern baldness

Directory of Open Access Journals (Sweden)

Muhammad Ahmad

2016-01-01

Full Text Available Various classifications for male pattern baldness are mentioned in the literature. The 'Norwood's classification is the most commonly used but it has certain limitations. The new system has included 'three' extra features which were not mentioned in any other classification. It provides an opportunity to document the full and correct picture while documenting male pattern baldness. It also aids in assessing the treatment for various degrees of baldness.

Phishtest: Measuring the Impact of Email Headers on the Predictive Accuracy of Machine Learning Techniques

Science.gov (United States)

Tout, Hicham

2013-01-01

The majority of documented phishing attacks have been carried by email, yet few studies have measured the impact of email headers on the predictive accuracy of machine learning techniques in detecting email phishing attacks. Research has shown that the inclusion of a limited subset of email headers as features in training machine learning…

Integration of holography into the design of bank notes and security documents

Science.gov (United States)

Dunn, Paul

2000-10-01

The use of holograms and other diffractive optically variable devices have been used successfully in the fight against counterfeiting of security documents for several years. More recently they have become globally accepted as a key security feature on banknotes as reflected in their prime use on the Euronotes to be issues in 2002. The success of the design and origination of these images depends upon their strong visual appeal, their overt and covert content and the ability to offer unique features that provides an extremely difficult barrier for the would be counterfeiter to overcome. The basic design principles both for banknote and general security print application are discussed in this review document. TO be effective as a security device the image must be fit for the purpose. This means that the image must contain the level of overt and covert features that are easy to recognize, containing high level security features and form part of an educational program aimed at the product user and specifically trained security personnel. More specifically it must meet a clearly defined performance criteria.

Mined Geologic Disposal System Requirements Document

International Nuclear Information System (INIS)

1994-03-01

This Mined Geologic Disposal System Requirements Document (MGDS-RD) describes the functions to be performed by, and the requirements for, a Mined Geologic Disposal System (MGDS) for the permanent disposal of spent nuclear fuel (SNF) (including SNF loaded in multi-purpose canisters (MPCs)) and commercial and defense high-level radioactive waste (HLW) in support of the Civilian Radioactive Waste Management System (CRWMS). The purpose of the MGDS-RD is to define the program-level requirements for the design of the Repository, the Exploratory Studies Facility (ESF), and Surface Based Testing Facilities (SBTF). These requirements include design, operation, and decommissioning requirements to the extent they impact on the physical development of the MGDS. The document also presents an overall description of the MGDS, its functions (derived using the functional analysis documented by the Physical System Requirements (PSR) documents as a starting point), its segments as described in Section 3.1.3, and the requirements allocated to the segments. In addition, the program-level interfaces of the MGDS are identified. As such, the MGDS-RD provides the technical baseline for the design of the MGDS

Intelligent bar chart plagiarism detection in documents.

Science.gov (United States)

Al-Dabbagh, Mohammed Mumtaz; Salim, Naomie; Rehman, Amjad; Alkawaz, Mohammed Hazim; Saba, Tanzila; Al-Rodhaan, Mznah; Al-Dhelaan, Abdullah

2014-01-01

This paper presents a novel features mining approach from documents that could not be mined via optical character recognition (OCR). By identifying the intimate relationship between the text and graphical components, the proposed technique pulls out the Start, End, and Exact values for each bar. Furthermore, the word 2-gram and Euclidean distance methods are used to accurately detect and determine plagiarism in bar charts.

Intelligent Bar Chart Plagiarism Detection in Documents

Science.gov (United States)

Al-Dabbagh, Mohammed Mumtaz; Salim, Naomie; Alkawaz, Mohammed Hazim; Saba, Tanzila; Al-Rodhaan, Mznah; Al-Dhelaan, Abdullah

2014-01-01

This paper presents a novel features mining approach from documents that could not be mined via optical character recognition (OCR). By identifying the intimate relationship between the text and graphical components, the proposed technique pulls out the Start, End, and Exact values for each bar. Furthermore, the word 2-gram and Euclidean distance methods are used to accurately detect and determine plagiarism in bar charts. PMID:25309952

F-Area Seepage Basins: Environmental information document

International Nuclear Information System (INIS)

Corbo, P.; Killian, T.H.; Kolb, N.L.; Marine, I.W.

1986-12-01

This document provides environmental information on postulated closure options for the F-Area Seepage Basins at the Savannah River Plant and was developed as background technical documentation for the Department of Energy's proposed Environmental Impact Statement (EIS) on waste management activities for groundwater protection at the plant. The results of groundwater and atmospheric pathway analyses, accident analysis, and other environmental assessments discussed in this document are based upon a conservative analysis of all foreseeable scenarios as defined by the National Environmental Policy Act (40 CFR 1502.22). The scenarios do not necessarily represent actual environmental conditions. This document is not meant to represent or be used as a regulatory closure plan or other regulatory sufficient document. Technical assistance in the environmental analyses of waste site closures was provided by Clemson University; GeoTrans, Inc.; JBF Associates, Inc.; S.S. Papadopulos and Associates Inc.; Radiological Assessments Corporation; Rogers and Associates Engineering Corporation; Science Applications International Corporation; C.B. Shedrow Environmental Consultants, Inc.; Exploration Software; and Verbatim Typing and Editing

How did the AD 1755 tsunami impact on sand barriers across the southern coast of Portugal?

DEFF Research Database (Denmark)

Costa, Pedro J. M.; Costas, Susana; Gonzalez-Villanueva, R.

2016-01-01

1755 tsunami flood on a coastal segment located within the southern coast of Portugal. In particular, the work focuses on deciphering the impact of the tsunami waves over a coastal sand barrier enclosing two lowlands largely inundated by the tsunami flood. Erosional features documented by geophysical...... above mean sea level). Our work highlights the usefulness of erosional imprints preserved in the sediment record to interpret the impact of the extreme events on sand barriers....

New session of “CERN Document Server (CDS), Inspire and Library Services”

CERN Multimedia

Technical Training

2013-01-01

The training course is given by members of CERN’s CDS Team (IT-CIS group) and the Library Services (GIS SIS group) and is intended for all CERN members of personnel.   This course will present CDS, inspirehep.net, and the content, scope and scientific information available in or with CDS, as well as the classification and organisation of the documents. It is intended to give you the training to use CDS efficiently and, in particular, covers:
 the main characteristics and advanced features for the search of documents (scientific, multimedia, etc)
, the collaborative tools: baskets, alerts, comments, evaluation, etc.
 the submission of documents in CDS and examples of workflows.   An important part of the training will be the various exercises, designed to give participants the ability to work with CDS in real life cases, including with the most advanced features. Don’t wait! Sign up for the training course directly through the CERN Training Catal...

Improving Classification of Protein Interaction Articles Using Context Similarity-Based Feature Selection.

Science.gov (United States)

Chen, Yifei; Sun, Yuxing; Han, Bing-Qing

2015-01-01

Protein interaction article classification is a text classification task in the biological domain to determine which articles describe protein-protein interactions. Since the feature space in text classification is high-dimensional, feature selection is widely used for reducing the dimensionality of features to speed up computation without sacrificing classification performance. Many existing feature selection methods are based on the statistical measure of document frequency and term frequency. One potential drawback of these methods is that they treat features separately. Hence, first we design a similarity measure between the context information to take word cooccurrences and phrase chunks around the features into account. Then we introduce the similarity of context information to the importance measure of the features to substitute the document and term frequency. Hence we propose new context similarity-based feature selection methods. Their performance is evaluated on two protein interaction article collections and compared against the frequency-based methods. The experimental results reveal that the context similarity-based methods perform better in terms of the F1 measure and the dimension reduction rate. Benefiting from the context information surrounding the features, the proposed methods can select distinctive features effectively for protein interaction article classification.

SRS Geology/Hydrogeology Environmental Information Document

International Nuclear Information System (INIS)

Denham, M.E.

1999-01-01

The purpose of the Savannah River Site Geology and Hydrogeology Environmental Information Document (EID) is to provide geologic and hydrogeologic information to serve as a baseline to evaluate potential environmental impacts. This EID is based on a summary of knowledge accumulated from research conducted at the Savannah River Site (SRS) and surrounding areas

SRS Geology/Hydrogeology Environmental Information Document

Energy Technology Data Exchange (ETDEWEB)

Denham, M.E.

1999-08-31

The purpose of the Savannah River Site Geology and Hydrogeology Environmental Information Document (EID) is to provide geologic and hydrogeologic information to serve as a baseline to evaluate potential environmental impacts. This EID is based on a summary of knowledge accumulated from research conducted at the Savannah River Site (SRS) and surrounding areas.

Signature detection and matching for document image retrieval.

Science.gov (United States)

Zhu, Guangyu; Zheng, Yefeng; Doermann, David; Jaeger, Stefan

2009-11-01

As one of the most pervasive methods of individual identification and document authentication, signatures present convincing evidence and provide an important form of indexing for effective document image processing and retrieval in a broad range of applications. However, detection and segmentation of free-form objects such as signatures from clustered background is currently an open document analysis problem. In this paper, we focus on two fundamental problems in signature-based document image retrieval. First, we propose a novel multiscale approach to jointly detecting and segmenting signatures from document images. Rather than focusing on local features that typically have large variations, our approach captures the structural saliency using a signature production model and computes the dynamic curvature of 2D contour fragments over multiple scales. This detection framework is general and computationally tractable. Second, we treat the problem of signature retrieval in the unconstrained setting of translation, scale, and rotation invariant nonrigid shape matching. We propose two novel measures of shape dissimilarity based on anisotropic scaling and registration residual error and present a supervised learning framework for combining complementary shape information from different dissimilarity metrics using LDA. We quantitatively study state-of-the-art shape representations, shape matching algorithms, measures of dissimilarity, and the use of multiple instances as query in document image retrieval. We further demonstrate our matching techniques in offline signature verification. Extensive experiments using large real-world collections of English and Arabic machine-printed and handwritten documents demonstrate the excellent performance of our approaches.

Software Tools for In-Situ Documentation of Built Heritage

Science.gov (United States)

Smars, P.

2013-07-01

The paper presents open source software tools developed by the author to facilitate in-situ documentation of architectural and archæological heritage. The design choices are exposed and related to a general issue in conservation and documentation: taking decisions about a valuable object under threat . The questions of level of objectivity is central to the three steps of this process. It is our belief that in-situ documentation has to be favoured in this demanding context, full of potential discoveries. The very powerful surveying techniques in rapid development nowadays enhance our vision but often tend to bring back a critical part of the documentation process to the office. The software presented facilitate a direct treatment of the data on the site. Emphasis is given to flexibility, interoperability and simplicity. Key features of the software are listed and illustrated with examples (3D model of Gothic vaults, analysis of the shape of a column, deformation of a wall, direct interaction with AutoCAD).

50 CFR 23.51 - What are the requirements for issuing a partially completed CITES document?

Science.gov (United States)

2010-10-01

..., BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE... CITES documents only when: (i) The permitted trade will have a negligible impact or no impact on the... completed documents benefits both the permit holder and the issuing Management Authority. (2) The proposed...

Intelligent Bar Chart Plagiarism Detection in Documents

Directory of Open Access Journals (Sweden)

Mohammed Mumtaz Al-Dabbagh

2014-01-01

Full Text Available This paper presents a novel features mining approach from documents that could not be mined via optical character recognition (OCR. By identifying the intimate relationship between the text and graphical components, the proposed technique pulls out the Start, End, and Exact values for each bar. Furthermore, the word 2-gram and Euclidean distance methods are used to accurately detect and determine plagiarism in bar charts.

Teaching English Pronunciation of Suprasegmental Features on Students of English Education

Directory of Open Access Journals (Sweden)

Ahmad Yousef Bani

2018-01-01

Full Text Available The objective of this research is to know the technique and activity in teaching English pronunciation on suprasegmental features (intonation and stress. This research uses qualitative approach with descriptive method. The subject of this research is 6 students from English education department. Technique of collecting data by doing observation, interview and documentation. The results showed In teaching English pronunciation for suprasegmental features is very concerned about the how to teach students, give materials and do exercises. There are some materials that are taught to improve students' ability in stress words of English sentences. Students learnt combination of words adjectives and nouns are generally stressed is in the first, students are taught about the prefix, learnt about words with suffixes and students were also given exercise with compound words. Furthermore, in teaching intonation, students are also given understanding and practicing the reading text, analyzing and pronouncing the English word in accordance with the correct intonation. The impact, students understand how to use rising and falling intonation.

Human impacts affect tree community features of 20 forest fragments of a vanishing neotropical hotspot.

Science.gov (United States)

Pereira, José Aldo Alves; de Oliveira-Filho, Ary Teixeira; Eisenlohr, Pedro V; Miranda, Pedro L S; de Lemos Filho, José Pires

2015-02-01

The loss in forest area due to human occupancy is not the only threat to the remaining biodiversity: forest fragments are susceptible to additional human impact. Our aim was to investigate the effect of human impact on tree community features (species composition and abundance, and structural descriptors) and check if there was a decrease in the number of slender trees, an increase in the amount of large trees, and also a reduction in the number of tree species that occur in 20 fragments of Atlantic montane semideciduous forest in southeastern Brazil. We produced digital maps of each forest fragment using Landsat 7 satellite images and processed the maps to obtain morphometric variables. We used investigative questionnaires and field observations to survey the history of human impact. We then converted the information into scores given to the extent, severity, and duration of each impact, including proportional border area, fire, trails, coppicing, logging, and cattle, and converted these scores into categorical levels. We used linear models to assess the effect of impacts on tree species abundance distribution and stand structural descriptors. Part of the variation in floristic patterns was significantly correlated to the impacts of fire, logging, and proportional border area. Structural descriptors were influenced by cattle and outer roads. Our results provided, for the first time, strong evidence that tree species occurrence and abundance, and forest structure of Atlantic seasonal forest fragments respond differently to various modes of disturbance by humans.

Commentary on "How Task Features Impact Evidence from Assessments Embedded in Simulations and Games" by Almond et al.

Science.gov (United States)

Timms, Mike

2014-01-01

In his commentary on "How Task Features Impact Evidence from Assessments Embedded in Simulations and Games" by Almond et al., Mike Timms writes that his own research has involved the use of embedded assessments using simulations in interactive learning environments, and the Evidence Centered Design (ECD) approach has provided a solid…

Transportation system requirements document. Revision 1 DCN01. Supplement

International Nuclear Information System (INIS)

1995-05-01

The original Transportation System Requirements Document described the functions to be performed by and the technical requirements for the Transportation System to transport spent nuclear fuel (SNF) and high-level radioactive waste (HLW) from Purchaser and Producer sites to a Civilian Radioactive Waste Management System (CRWMS) site, and between CRWMS sites. The purpose of that document was to define the system-level requirements. These requirements include design and operations requirements to the extent they impact on the development of the physical segments of Transportation. The document also presented an overall description of Transportation, its functions, its segments, and the requirements allocated to the segments and the system-level interfaces with Transportation. This revision of the document contains only the pages that have been modified

Gas Attack of the German Troops in Ikskyulsky Fortified Area: Documents Testify

Directory of Open Access Journals (Sweden)

Vladimir V. Korovin

2014-12-01

Full Text Available World War I has become the main testing area for test and application of the latest types of weapons, including such type of weapons of mass destruction as chemical. Despite rather detailed description of poison gases use on the battlefields in works of the military experts, newly revealed documentary sources allow to capture the public attention both to operational and tactical results of their impact and to social and humanitarian consequences of the appeal to similar methods of war. The specified circumstance gains special relevance in the modern geopolitical situation. The publication is based on the documents introduced into scientific use for the first time, gained in funds of the Russian state military and historical archive. Behavioral features of the staff of the military units, caught by gas attack of the German troops on Ikskyulsky bridgehead on September 25, 1916 are revealed in the article.

MCNP4A: Features and philosophy

International Nuclear Information System (INIS)

Hendricks, J.S.

1993-01-01

This paper describes MCNP, states its philosophy, introduces a number of new features becoming available with version MCNP4A, and answers a number of questions asked by participants in the workshop. MCNP is a general-purpose three-dimensional neutron, photon and electron transport code. Its philosophy is ''Quality, Value and New Features.'' Quality is exemplified by new software quality assurance practices and a program of benchmarking against experiments. Value includes a strong emphasis on documentation and code portability. New features are the third priority. MCNP4A is now available at Los Alamos. New features in MCNP4A include enhanced statistical analysis, distributed processor multitasking, new photon libraries, ENDF/B-VI capabilities, X-Windows graphics, dynamic memory allocation, expanded criticality output, periodic boundaries, plotting of particle tracks via SABRINA, and many other improvements. 23 refs

Review of medical discharge summaries and medical documentation in a metropolitan hospital: impact on diagnostic-related groups and Weighted Inlier Equivalent Separation.

Science.gov (United States)

Chin, N; Perera, P; Roberts, A; Nagappan, R

2013-07-01

Accurate and comprehensive clinical documentation is crucial for effective ongoing patient care, follow up and to optimise case mix-based funding. Each Diagnostic Related Group (DRG) is assigned a 'weight', leading to Weighted Inlier Equivalent Separation (WIES), a system many public and private hospitals in Australia subscribe to. To identify the top DRG in a general medical inpatient service, the completeness of medical discharge documentation, commonly missed comorbidities and system-related issues and subsequent impact on DRG and WIES allocation. One hundred and fifty completed discharge summaries were randomly selected from the top 10 medical DRG in our health service. From a detailed review of the clinical documentation, principal diagnoses, associated comorbidities and complications, where appropriate, the DRG and WIES were modified. Seventy-two (48%) of the 150 reviewed admissions resulted in a revision of DRG and WIES equivalent to an increase of AUD 142,000. Respiratory-based DRG generated the largest revision of DRG and WIES, while 'Cellulitis' DRG had the largest relative change. Twenty-seven per cent of summaries reviewed necessitated a change in coding with no subsequent change in DRG allocation or WIES. Acute renal failure, anaemia and electrolyte disturbances were the most commonly underrepresented entities in clinical discharge documentation. Seven patients had their WIES downgraded. Comprehensive documentation of principal diagnosis/diagnoses, comorbidities and their complications is imperative to optimal DRG and WIES allocation. Regular meetings between clinical and coding staff improve the quality and timeliness of medical documentation, ensure adequate communication with general practitioners and lead to appropriate funding. © 2013 The Authors; Internal Medicine Journal © 2013 Royal Australasian College of Physicians.

A rock characterisation facility consultative document

International Nuclear Information System (INIS)

1992-10-01

This U.K. Nirex Ltd., consultative document describes a proposed underground rock characterisation facility, east of Sellafield, for conducting geophysical surveys as a basis for refining long-term safety analysis of an underground repository for intermediate-level and low-level radioactive wastes. Planning application will be submitted in 1993. The construction of shafts and galleries is described and the site's geologic, topographical, climatic and archaeological features discussed. The effects to the local environment and on local populations and other socio-economic factors are discussed. (UK)

Utopia documents: linking scholarly literature with research data.

Science.gov (United States)

Attwood, T K; Kell, D B; McDermott, P; Marsh, J; Pettifer, S R; Thorne, D

2010-09-15

In recent years, the gulf between the mass of accumulating-research data and the massive literature describing and analyzing those data has widened. The need for intelligent tools to bridge this gap, to rescue the knowledge being systematically isolated in literature and data silos, is now widely acknowledged. To this end, we have developed Utopia Documents, a novel PDF reader that semantically integrates visualization and data-analysis tools with published research articles. In a successful pilot with editors of the Biochemical Journal (BJ), the system has been used to transform static document features into objects that can be linked, annotated, visualized and analyzed interactively (http://www.biochemj.org/bj/424/3/). Utopia Documents is now used routinely by BJ editors to mark up article content prior to publication. Recent additions include integration of various text-mining and biodatabase plugins, demonstrating the system's ability to seamlessly integrate on-line content with PDF articles. http://getutopia.com.

Assessing the Readability of Medical Documents: A Ranking Approach.

Science.gov (United States)

Zheng, Jiaping; Yu, Hong

2018-03-23

The use of electronic health record (EHR) systems with patient engagement capabilities, including viewing, downloading, and transmitting health information, has recently grown tremendously. However, using these resources to engage patients in managing their own health remains challenging due to the complex and technical nature of the EHR narratives. Our objective was to develop a machine learning-based system to assess readability levels of complex documents such as EHR notes. We collected difficulty ratings of EHR notes and Wikipedia articles using crowdsourcing from 90 readers. We built a supervised model to assess readability based on relative orders of text difficulty using both surface text features and word embeddings. We evaluated system performance using the Kendall coefficient of concordance against human ratings. Our system achieved significantly higher concordance (.734) with human annotators than did a baseline using the Flesch-Kincaid Grade Level, a widely adopted readability formula (.531). The improvement was also consistent across different disease topics. This method's concordance with an individual human user's ratings was also higher than the concordance between different human annotators (.658). We explored methods to automatically assess the readability levels of clinical narratives. Our ranking-based system using simple textual features and easy-to-learn word embeddings outperformed a widely used readability formula. Our ranking-based method can predict relative difficulties of medical documents. It is not constrained to a predefined set of readability levels, a common design in many machine learning-based systems. Furthermore, the feature set does not rely on complex processing of the documents. One potential application of our readability ranking is personalization, allowing patients to better accommodate their own background knowledge. ©Jiaping Zheng, Hong Yu. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 23.03.2018.

On the typography of flight-deck documentation

Science.gov (United States)

Degani, Asaf

1992-01-01

Many types of paper documentation are employed on the flight-deck. They range from a simple checklist card to a bulky Aircraft Flight Manual (AFM). Some of these documentations have typographical and graphical deficiencies; yet, many cockpit tasks such as conducting checklists, way-point entry, limitations and performance calculations, and many more, require the use of these documents. Moreover, during emergency and abnormal situations, the flight crews' effectiveness in combating the situation is highly dependent on such documentation; accessing and reading procedures has a significant impact on flight safety. Although flight-deck documentation are an important (and sometimes critical) form of display in the modern cockpit, there is a dearth of information on how to effectively design these displays. The object of this report is to provide a summary of the available literature regarding the design and typographical aspects of printed matter. The report attempts 'to bridge' the gap between basic research about typography, and the kind of information needed by designers of flight-deck documentation. The report focuses on typographical factors such as type-faces, character height, use of lower- and upper-case characters, line length, and spacing. Some graphical aspects such as layout, color coding, fonts, and character contrast are also discussed. In addition, several aspects of cockpit reading conditions such as glare, angular alignment, and paper quality are addressed. Finally, a list of recommendations for the graphical design of flight-deck documentation is provided.

PERPETUAL LEASE: FEATURES OF ACCOUNTING

Directory of Open Access Journals (Sweden)

Tetiana Yurchenko

2017-03-01

Full Text Available The article namely deals with the peculiarities of legal regulation of the right to use someone else's land for agricultural purposes under the perpetual lease contract. Recognition of the legitimacy of perpetual lease as an intangible asset and, therefore, the object of accounting was justified. The features of the primary account perpetual lease rights were analyzed. It was found that for documenting transactions receipt, commissioning, de-recognition perpetual lease specialized forms of primary documents is not installed. The main aspects of accounting reflection of land under perpetual lease contracts were identified and ways of their improving were developed. The period on which the land is transferred for use under perpetual lease contract was proposed. During the study, general scientific methods – induction, deduction, synthesis, analysis, dialectical, historical, generalizations and specific methods of accounting – documentation, evaluation, accounting records were used. Keywords: accounting, land, perpetual lease, intangible assets, the right to use.

Document: the radiological survey of the environment

International Nuclear Information System (INIS)

Gerno, Linden; Leprieur, F.; Janssens, A.

2002-01-01

The document presents the radiological survey of the environment in France today with a comparison of the situation in Switzerland, Germany and Belgium. The evolution of the policy in this activity is also concerned. The laboratories and their monitoring equipment, the regulation and the social impacts are discussed. (A.L.B.)

Computer Support for Document Management in the Danish Central Government

DEFF Research Database (Denmark)

Hertzum, Morten

1995-01-01

Document management systems are generally assumed to hold a potential for delegating the recording and retrieval of documents to professionals such as civil servants and for supporting the coordination and control of work, so-called workflow management. This study investigates the use and organiz......Document management systems are generally assumed to hold a potential for delegating the recording and retrieval of documents to professionals such as civil servants and for supporting the coordination and control of work, so-called workflow management. This study investigates the use...... and organizational impact of document management systems in the Danish central government. The currently used systems unfold around the recording of incoming and outgoing paper mail and have typically not been accompanied by organizational changes. Rather, document management tends to remain an appendix...... to the primary work and be delegated to a specialized organizational unit. Several factors contribute to the present document management practices, for example it takes an extraordinary effort to achieve the benefits, and few institutions are forced to pursue them. Furthermore, document and workflow management...

Superconducting Super Collider: Final environmental impact statement: Volume 2, Comment/response document: Summary and index

International Nuclear Information System (INIS)

1988-12-01

This volume is divided into five parts as follows: Summary and Index; Letters submitted by commenters in response to the Draft Environmental Impact Statement (DEIS) from date of issue through October 17, 1988; Transcripts of testimony at the public hearings conducted by the DOE in the vicinity of each site alternative; Letters postmarked after October 17, 1988; and Comment responses to both the letters and the testimony. This summary and index is published as a guide to the reader in reviewing this document. The summary is of the approximately 7000 comments received by the DOE from a total of about 5700 commenters. It was prepared as a general reference and guide to the readers of this volume. The Index follows the summary. The first index is an alphabetical listing of commenters (of both letters and transcripts) and indicates the number each commenter was assigned. The commenter numbers guide the reader to DOE comment responses in Volume 2B which are in numerical order

Technical training: CERN Document Server (CDS), Inspire and Library Services

CERN Multimedia

IT & GS Departments

2012-01-01

A new training course, “CERN Document Server (CDS), Inspire and Library Services”, is available since the beginning of the year. The training course is given by members of CERN’s CDS Team (IT-CIS group) and the Library Services (GIS SIS group) and is intended for all members of personnel of CERN. This course will present CDS and inspirehep.net and the content, scope and scientific information available in or with CDS, as much as the classification and organization of the documents. It is intended to give you the training needed to know how to use CDS most efficiently and in particular covers: the main characteristics and advanced features for the search of documents (scientific, multimedia, etc). the collaborative tools : baskets, alerts, comments, evaluation, etc. the submission of documents in CDS and examples of workflows. An important part of the training is composed of various exercises, designed to acquire practical ability to work with CDS in cases similar to re...

Serological documentation of maternal influenza exposure and bipolar disorder in adult offspring.

Science.gov (United States)

Canetta, Sarah E; Bao, Yuanyuan; Co, Mary Dawn T; Ennis, Francis A; Cruz, John; Terajima, Masanori; Shen, Ling; Kellendonk, Christoph; Schaefer, Catherine A; Brown, Alan S

2014-05-01

The authors examined whether serologically confirmed maternal exposure to influenza was associated with an increased risk of bipolar disorder in the offspring and with subtypes of bipolar disorder, with and without psychotic features. The study used a nested case-control design in the Child Health and Development Study birth cohort. In all, 85 individuals with bipolar disorder were identified following extensive ascertainment and diagnostic assessment and matched to 170 comparison subjects in the analysis. Serological documentation of maternal exposure to influenza was determined using the hemagglutination inhibition assay. No association was observed between serologically documented maternal exposure to influenza and bipolar disorder in offspring. However, maternal serological influenza exposure was related to a significant fivefold greater risk of bipolar disorder with psychotic features. The results suggest that maternal influenza exposure may increase the risk for offspring to develop bipolar disorder with psychotic features. Taken together with earlier associations between prenatal influenza exposure and schizophrenia, these results may suggest that prenatal influenza is a risk factor for psychosis rather than for a specific psychotic disorder diagnosis.

New security features and their impact on low-cost note readers

Science.gov (United States)

Bernardini, Ronald R.

2004-06-01

Banknote security features are evolving and changing. New features are constantly being developed and slowly being incorporated into banknotes. The assumption is that these features make the notes more secure for everyone; but do they? This paper looks at some of the features incorporated in today's banknotes and how (or if) they add security to banknotes processed by low cost banknote readers. The sensing technology used in low cost note readers has changed somewhat in the last few years but the industry is still faced by the cost constraints of a very competitive market. Some of the new note features require high-resolution image capture, complex optical measurements or expensive emission/detection devices. Paper watermarks, digital watermarks, OVI, Holograms, Stokes conversion, IR and magnetic features are examined, as well as the technologies used and the relative cost/benefit developed for these note features.

NREL: A Year in Clean Energy Innovations; A Review of NREL's 2011 Feature Stories

Energy Technology Data Exchange (ETDEWEB)

2012-04-01

This document is a compilation of articles featuring NREL research and development, deployment, commercialization, and outreach activities in 2011. The feature stories can be found online at http:www.nrel.gov/features/.

Bechtel automated control of design document data

International Nuclear Information System (INIS)

Hollingshaus, H.

1986-01-01

Concern for nuclear power plant safety has resulted in many design features that complicate the licensing, operation, and maintenance of nuclear plants. To manage and control the design effectively, Bechtel has developed an integrated design document data base that provides efficient support of the plant during all phases of its life. The program runs on the IBM System 38, but can also be downloaded to an IBM PC to save storage and connect time. It is interactive and can accommodate multiple users at various locations. Although primarily developed to manage design changes resulting from the regulatory process and use of a fast track construction schedule, the data base will provide operations and maintenance personnel with qualifications status and pertinent data for each piece of equipment, including all electrical devices and a list of all associated design documents

Waste Form Features, Events, and Processes

International Nuclear Information System (INIS)

R. Schreiner

2004-01-01

The purpose of this report is to evaluate and document the inclusion or exclusion of the waste form features, events and processes (FEPs) with respect to modeling used to support the Total System Performance Assessment for License Application (TSPA-LA). A screening decision, either Included or Excluded, is given for each FEP along with the technical bases for screening decisions. This information is required by the Nuclear Regulatory Commission (NRC) in 10 CFR 63.114 (d, e, and f) [DIRS 156605]. The FEPs addressed in this report deal with the issues related to the degradation and potential failure of the waste form and the migration of the waste form colloids. For included FEPs, this analysis summarizes the implementation of the FEP in TSPA-LA, (i.e., how the FEP is included). For excluded FEPs, this analysis provides the technical bases for exclusion from TSPA-LA (i.e., why the FEP is excluded). This revision addresses the TSPA-LA FEP list (DTN: MO0407SEPFEPLA.000 [DIRS 170760]). The primary purpose of this report is to identify and document the analyses and resolution of the features, events, and processes (FEPs) associated with the waste form performance in the repository. Forty FEPs were identified that are associated with the waste form performance. This report has been prepared to document the screening methodology used in the process of FEP inclusion and exclusion. The analyses documented in this report are for the license application (LA) base case design (BSC 2004 [DIRS 168489]). In this design, a drip shield is placed over the waste package and no backfill is placed over the drip shield (BSC 2004 [DIRS 168489]). Each FEP may include one or more specific issues that are collectively described by a FEP name and a FEP description. The FEP description may encompass a single feature, process or event, or a few closely related or coupled processes if the entire FEP can be addressed by a single specific screening argument or TSPA-LA disposition. The FEPs are

Waste Form Features, Events, and Processes

Energy Technology Data Exchange (ETDEWEB)

R. Schreiner

2004-10-27

The purpose of this report is to evaluate and document the inclusion or exclusion of the waste form features, events and processes (FEPs) with respect to modeling used to support the Total System Performance Assessment for License Application (TSPA-LA). A screening decision, either Included or Excluded, is given for each FEP along with the technical bases for screening decisions. This information is required by the Nuclear Regulatory Commission (NRC) in 10 CFR 63.114 (d, e, and f) [DIRS 156605]. The FEPs addressed in this report deal with the issues related to the degradation and potential failure of the waste form and the migration of the waste form colloids. For included FEPs, this analysis summarizes the implementation of the FEP in TSPA-LA, (i.e., how the FEP is included). For excluded FEPs, this analysis provides the technical bases for exclusion from TSPA-LA (i.e., why the FEP is excluded). This revision addresses the TSPA-LA FEP list (DTN: MO0407SEPFEPLA.000 [DIRS 170760]). The primary purpose of this report is to identify and document the analyses and resolution of the features, events, and processes (FEPs) associated with the waste form performance in the repository. Forty FEPs were identified that are associated with the waste form performance. This report has been prepared to document the screening methodology used in the process of FEP inclusion and exclusion. The analyses documented in this report are for the license application (LA) base case design (BSC 2004 [DIRS 168489]). In this design, a drip shield is placed over the waste package and no backfill is placed over the drip shield (BSC 2004 [DIRS 168489]). Each FEP may include one or more specific issues that are collectively described by a FEP name and a FEP description. The FEP description may encompass a single feature, process or event, or a few closely related or coupled processes if the entire FEP can be addressed by a single specific screening argument or TSPA-LA disposition. The FEPs are

Project Documentation as a Risk for Public Projects

Directory of Open Access Journals (Sweden)

Vladěna Štěpánková

2015-08-01

Full Text Available Purpose of the article: The paper presents the different methodologies used for creating documentation and focuses on public projects and their requirements for this documentation. Since documentation is also incorporated in the overall planning of the project and its duration is estimated using expert qualified estimate, can any change in this documentation lead to project delays, or increase its cost as a result of consuming administration, and therefore the documentation is seen as a risk, which may threaten the project as a public contract by which a company trying to achieve and obtains it, and generally any project. Methodology/methods: There are used methods of obtaining information in this paper. These are mainly structured interviews in combination with a brainstorming, furthermore also been used questionnaire for companies dealing with public procurement. As a data processing program was used MS Excel and basic statistical methods based on regression analysis. Scientific aim: The article deals with the construction market in the Czech Republic and examines the impact of changes in project documentation of public projects on their turnover. Findings: In this paper we summarize the advantages and disadvantages of having project documentation. In the case of public contracts and changes in legislation it is necessary to focus on creating documentation in advance, follow the new requirements and try to reach them in the shortest possible time. Conclusions: The paper concludes with recommendations on how to proceed, if these changes and how to reduce costs, which may cause the risk of documentation.

Classification of health webpages as expert and non expert with a reduced set of cross-language features.

Science.gov (United States)

Grabar, Natalia; Krivine, Sonia; Jaulent, Marie-Christine

2007-10-11

Making the distinction between expert and non expert health documents can help users to select the information which is more suitable for them, according to whether they are familiar or not with medical terminology. This issue is particularly important for the information retrieval area. In our work we address this purpose through stylistic corpus analysis and the application of machine learning algorithms. Our hypothesis is that this distinction can be performed on the basis of a small number of features and that such features can be language and domain independent. The used features were acquired in source corpus (Russian language, diabetes topic) and then tested on target (French language, pneumology topic) and source corpora. These cross-language features show 90% precision and 93% recall with non expert documents in source language; and 85% precision and 74% recall with expert documents in target language.

Evaluating Stability and Comparing Output of Feature Selectors that Optimize Feature Subset Cardinality

Czech Academy of Sciences Publication Activity Database

Somol, Petr; Novovičová, Jana

2010-01-01

Roč. 32, č. 11 (2010), s. 1921-1939 ISSN 0162-8828 R&D Projects: GA MŠk 1M0572; GA ČR GA102/08/0593; GA ČR GA102/07/1594 Grant - others:GA MŠk(CZ) 2C06019 Institutional research plan: CEZ:AV0Z10750506 Keywords : feature selection * feature stability * stability measures * similarity measures * sequential search * individual ranking * feature subset-size optimization * high dimensionality * small sample size Subject RIV: BD - Theory of Information Impact factor: 5.027, year: 2010 http://library.utia.cas.cz/separaty/2010/RO/somol-0348726.pdf

Documenting costs and yield of crops of organic origin

Directory of Open Access Journals (Sweden)

J.P. Melnychuk

2016-06-01

Full Text Available The article focuses on the study of primary cost accounting and output of organic crop production. The article has also agreed the key issues that ensure in the primary accounting of organic crop production. For the survey we have used such general scientific methods as induction and deduction, dialectic, historical and systematic methods and some specific methods of accounting which include documentation, inventory, assessment, calculation, accounting records, double entry, balance sheet and financial statements. . As for the documentation of costs and yield of crops of organic origin, it should be noted that documentation is an important method of accounting as it’s the basis of initial observation of commercial operations and it’s a prerequisite for their reflection in accounting. The article has highlighted the features of documenting the posting of production costs and crop production of organic origin, and has also studied the order of registration of land in the operating lease for the production of organic products. The author submits the suggestions for improvement of documenting costs and yields of organic crop production in order to develop reliable information about the costs of production and the grown crop of organic origin for management decision-making.

The impact of an oral hygiene education module on patient practices and nursing documentation.

Science.gov (United States)

Coke, Lola; Otten, Karine; Staffileno, Beth; Minarich, Laura; Nowiszewski, Candice

2015-02-01

Oral hygiene is inconsistent among patients with cancer and is a national patient care issue. To promote comfort and nutritional status, oral hygiene for patients with cancer is important. The purpose of this study was to develop an evidence-based oral hygiene educational module (EM) for nursing and patient care technician (PCT) staff to promote consistent oral hygiene patient education; evaluate patient understanding of oral hygiene practices post-EM; and determine staff documentation frequency of oral hygiene care. Pre- and post-EM data were collected using a developed oral hygiene assessment tool; nursing documentation data were collected by chart review. Post-EM data were collected eight weeks post-EM. Data were analyzed using frequencies and the Mann-Whitney U test. Twenty-two patient documentation pairs were collected. Compared to pre-EM, admission teaching, patient education, and patient oral hygiene practices improved post-EM. Post-EM oral hygiene documentation and PCT teaching increased.

User information document for WinGridder Version 3.0

International Nuclear Information System (INIS)

Pan, Lehua; Pan, Lehua

2007-01-01

WINGRIDDER V3.0 is a Windows-based software for designing and generating numerical grids for numerical simulators that are based on the 'integral finite difference' or the 'control volume' numerical scheme (e.g., TOUGH2, Pruess et al., 1996). The user can design and generate grid that properly represents the stratigraphic features, inclined faults, and repository. WINGRIDDER V3.0 is an upgrade from WINGRIDDER V2.0. This revision includes testable requirements as listed in the Requirements Document (RD), 10024-RD-3.0-00, Section 2. With new features, WINGRIDDER V3.0 adds the ability to generate a multiple-interactive-continuum (MINC) grid

Currency features for visually impaired people

Science.gov (United States)

Hyland, Sandra L.; Legge, Gordon E.; Shannon, Robert R.; Baer, Norbert S.

1996-03-01

The estimated 3.7 million Americans with low vision experience a uniquely difficult task in identifying the denominations of U.S. banknotes because the notes are remarkably uniform in size, color, and general design. The National Research Council's Committee on Currency Features Usable by the Visually Impaired assessed features that could be used by people who are visually disabled to distinguish currency from other documents and to denominate and authenticate banknotes using available technology. Variation of length and height, introduction of large numerals on a uniform, high-contrast background, use of different colors for each of the six denominations printed, and the introduction of overt denomination codes that could lead to development of effective, low-cost devices for examining banknotes were all deemed features available now. Issues affecting performance, including the science of visual and tactile perception, were addressed for these features, as well as for those features requiring additional research and development. In this group the committee included durable tactile features such as those printed with transparent ink, and the production of currency with holes to indicate denomination. Among long-range approaches considered were the development of technologically advanced devices and smart money.

Secondary psychotic features in refugees diagnosed with post-traumatic stress disorder

DEFF Research Database (Denmark)

Nygaard, Mette Kathrine; Sonne, Charlotte Kærgaard; Carlsson, Jessica

2017-01-01

at Competence Centre for Transcultural Psychiatry (CTP) were examined, and all the PTSD patients were divided into two groups; one group with secondary psychotic features (PTSD-SP group) and one without (PTSD group). A categorisation and description of the secondary psychotic features was undertaken. RESULTS......-SP prevalence in a clinical refugee population with PTSD. The study points to the difficulties distinguishing psychotic features from flashbacks and the authors call for attention to psychotic features in PTSD patients in order to improve documentation and understanding of the disorder....

NetProt: Complex-based Feature Selection.

Science.gov (United States)

Goh, Wilson Wen Bin; Wong, Limsoon

2017-08-04

Protein complex-based feature selection (PCBFS) provides unparalleled reproducibility with high phenotypic relevance on proteomics data. Currently, there are five PCBFS paradigms, but not all representative methods have been implemented or made readily available. To allow general users to take advantage of these methods, we developed the R-package NetProt, which provides implementations of representative feature-selection methods. NetProt also provides methods for generating simulated differential data and generating pseudocomplexes for complex-based performance benchmarking. The NetProt open source R package is available for download from https://github.com/gohwils/NetProt/releases/ , and online documentation is available at http://rpubs.com/gohwils/204259 .

Interplay of a multiplicity of security features

Science.gov (United States)

Moser, Jean-Frederic

2000-04-01

The great variety of existing security features can cause difficulty in choosing the adequate set for a particular security document. Considering the cost/benefit aspects with respect to the overall protection performance requested, a choice has to be made, for example, between either few features of high-security value or numerous many, less- resistant features. Another choice is the high versus low complexity of one particular features. A study aimed at providing a decision basis is a challenging matter because it involves human factors. Attention, perception, physiology of seeing and habits - to name some of the factors - are intangibles and are subject to evaluations involving normally a great number of experiments, if they are to be representative. The opportunity was given for a case study with the introduction of new Swiss banknotes between 1995 and 1998, because the new banknotes represent a novelty in the sense of the multiplicity and interplay of its optical security features. We have analyzed 652 articles which appeared in the press media concerning the new banknotes, seeking especially for peoples' reaction towards the security features.

Influence of Software on the Features of Laser-printed Characters

Directory of Open Access Journals (Sweden)

Yuanli Han

2017-01-01

Full Text Available Verifying the authenticity or otherwise of printed documents is one of the most important aspects of questioned document examination and plays a vital role in the field of forensic science. In recent years, continued developments in the quality of impression combined with ever-cheaper toner printers have allowed this technology to spread. It is now used in an increasing number of homes for all types of documents, including for criminal aims. Here, the factors that influence the printed features in text files are studied in relation to the operating system and the word processing software. The Net Application report in October 2014 showed that the market shares of Windows 7 and Windows XP were 53.05% and 17.18%, respectively. The Forrester report in October 2013 showed that the market share of Microsoft Office was more than 85%, the top three word processors being Microsoft Word 2003, 2007, and 2010. In this study, Windows XP (shortened to XP, Windows 7 (shortened to Win7, Microsoft Word 2003/2007/2010, WPS Office 2013, and the PDF format are chosen as the most common operating systems and word processing software. WPS Office was developed by the Chinese company Kingsoft Co., Ltd. and is widely used in China. A particular text file was designed and edited and was printed on a laser printer. The features of the printed characters were captured using an Anyty 3R digital microscope, Printer Expert, and X-printer devices. Coincidence comparison and outline feature extraction were used to evaluate the differences. It is shown that XP and Win7 have no effect on the printed features of text files. However, the printed features do depend to a certain extent on the word-processing software, with the PDF format having the greatest influence.

Towards fraud-proof ID documents using multiple data hiding technologies and biometrics

Science.gov (United States)

Picard, Justin; Vielhauer, Claus; Thorwirth, Niels

2004-06-01

Identity documents, such as ID cards, passports, and driver's licenses, contain textual information, a portrait of the legitimate holder, and eventually some other biometric characteristics such as a fingerprint or handwritten signature. As prices for digital imaging technologies fall, making them more widely available, we have seen an exponential increase in the ease and the number of counterfeiters that can effectively forge documents. Today, with only limited knowledge of technology and a small amount of money, a counterfeiter can effortlessly replace a photo or modify identity information on a legitimate document to the extent that it is very diffcult to differentiate from the original. This paper proposes a virtually fraud-proof ID document based on a combination of three different data hiding technologies: digital watermarking, 2-D bar codes, and Copy Detection Pattern, plus additional biometric protection. As will be shown, that combination of data hiding technologies protects the document against any forgery, in principle without any requirement for other security features. To prevent a genuine document to be used by an illegitimate user,biometric information is also covertly stored in the ID document, to be used for identification at the detector.

DOCUMENT IMAGE REGISTRATION FOR IMPOSED LAYER EXTRACTION

Directory of Open Access Journals (Sweden)

Surabhi Narayan

2017-02-01

Full Text Available Extraction of filled-in information from document images in the presence of template poses challenges due to geometrical distortion. Filled-in document image consists of null background, general information foreground and vital information imposed layer. Template document image consists of null background and general information foreground layer. In this paper a novel document image registration technique has been proposed to extract imposed layer from input document image. A convex polygon is constructed around the content of the input and the template image using convex hull. The vertices of the convex polygons of input and template are paired based on minimum Euclidean distance. Each vertex of the input convex polygon is subjected to transformation for the permutable combinations of rotation and scaling. Translation is handled by tight crop. For every transformation of the input vertices, Minimum Hausdorff distance (MHD is computed. Minimum Hausdorff distance identifies the rotation and scaling values by which the input image should be transformed to align it to the template. Since transformation is an estimation process, the components in the input image do not overlay exactly on the components in the template, therefore connected component technique is applied to extract contour boxes at word level to identify partially overlapping components. Geometrical features such as density, area and degree of overlapping are extracted and compared between partially overlapping components to identify and eliminate components common to input image and template image. The residue constitutes imposed layer. Experimental results indicate the efficacy of the proposed model with computational complexity. Experiment has been conducted on variety of filled-in forms, applications and bank cheques. Data sets have been generated as test sets for comparative analysis.

A database for TMT interface control documents

Science.gov (United States)

Gillies, Kim; Roberts, Scott; Brighton, Allan; Rogers, John

2016-08-01

The TMT Software System consists of software components that interact with one another through a software infrastructure called TMT Common Software (CSW). CSW consists of software services and library code that is used by developers to create the subsystems and components that participate in the software system. CSW also defines the types of components that can be constructed and their roles. The use of common component types and shared middleware services allows standardized software interfaces for the components. A software system called the TMT Interface Database System was constructed to support the documentation of the interfaces for components based on CSW. The programmer describes a subsystem and each of its components using JSON-style text files. A command interface file describes each command a component can receive and any commands a component sends. The event interface files describe status, alarms, and events a component publishes and status and events subscribed to by a component. A web application was created to provide a user interface for the required features. Files are ingested into the software system's database. The user interface allows browsing subsystem interfaces, publishing versions of subsystem interfaces, and constructing and publishing interface control documents that consist of the intersection of two subsystem interfaces. All published subsystem interfaces and interface control documents are versioned for configuration control and follow the standard TMT change control processes. Subsystem interfaces and interface control documents can be visualized in the browser or exported as PDF files.

DOCUMENT REPRESENTATION FOR CLUSTERING OF SCIENTIFIC ABSTRACTS

Directory of Open Access Journals (Sweden)

S. V. Popova

2014-01-01

Full Text Available The key issue of the present paper is clustering of narrow-domain short texts, such as scientific abstracts. The work is based on the observations made when improving the performance of key phrase extraction algorithm. An extended stop-words list was used that was built automatically for the purposes of key phrase extraction and gave the possibility for a considerable quality enhancement of the phrases extracted from scientific publications. A description of the stop- words list creation procedure is given. The main objective is to investigate the possibilities to increase the performance and/or speed of clustering by the above-mentioned list of stop-words as well as information about lexeme parts of speech. In the latter case a vocabulary is applied for the document representation, which contains not all the words that occurred in the collection, but only nouns and adjectives or their sequences encountered in the documents. Two base clustering algorithms are applied: k-means and hierarchical clustering (average agglomerative method. The results show that the use of an extended stop-words list and adjective-noun document representation makes it possible to improve the performance and speed of k-means clustering. In a similar case for average agglomerative method a decline in performance quality may be observed. It is shown that the use of adjective-noun sequences for document representation lowers the clustering quality for both algorithms and can be justified only when a considerable reduction of feature space dimensionality is necessary.

Arabic web pages clustering and annotation using semantic class features

Directory of Open Access Journals (Sweden)

Hanan M. Alghamdi

2014-12-01

Full Text Available To effectively manage the great amount of data on Arabic web pages and to enable the classification of relevant information are very important research problems. Studies on sentiment text mining have been very limited in the Arabic language because they need to involve deep semantic processing. Therefore, in this paper, we aim to retrieve machine-understandable data with the help of a Web content mining technique to detect covert knowledge within these data. We propose an approach to achieve clustering with semantic similarities. This approach comprises integrating k-means document clustering with semantic feature extraction and document vectorization to group Arabic web pages according to semantic similarities and then show the semantic annotation. The document vectorization helps to transform text documents into a semantic class probability distribution or semantic class density. To reach semantic similarities, the approach extracts the semantic class features and integrates them into the similarity weighting schema. The quality of the clustering result has evaluated the use of the purity and the mean intra-cluster distance (MICD evaluation measures. We have evaluated the proposed approach on a set of common Arabic news web pages. We have acquired favorable clustering results that are effective in minimizing the MICD, expanding the purity and lowering the runtime.

D3.5 Report on ECO social network integration features

NARCIS (Netherlands)

Viñuales, Javier; Driesner, Jorge; Tejera, Sara; Tomasini, Alessandra; Loozen, Kjeld; Rocio, Vítor; Bohuschke, Felix; Ternier, Stefaan

2016-01-01

This document describes how integrations with social networks are being developed in ECO platforms. With these new features, participants will be able to share results and other contents through Facebook, Twitter, Google plus.

Technical Support Document for Version 3.9.0 of the COMcheck Software

Energy Technology Data Exchange (ETDEWEB)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan; Halverson, Mark A.; Lucas, R. G.; Richman, Eric E.; Schultz, Ralph W.; Winiarski, David W.

2011-09-01

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989 and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC are no longer included, but those sections remain in this document for reference purposes.

Page Layout Analysis of the Document Image Based on the Region Classification in a Decision Hierarchical Structure

Directory of Open Access Journals (Sweden)

Hossein Pourghassem

2010-10-01

Full Text Available The conversion of document image to its electronic version is a very important problem in the saving, searching and retrieval application in the official automation system. For this purpose, analysis of the document image is necessary. In this paper, a hierarchical classification structure based on a two-stage segmentation algorithm is proposed. In this structure, image is segmented using the proposed two-stage segmentation algorithm. Then, the type of the image regions such as document and non-document image is determined using multiple classifiers in the hierarchical classification structure. The proposed segmentation algorithm uses two algorithms based on wavelet transform and thresholding. Texture features such as correlation, homogeneity and entropy that extracted from co-occurrenc matrix and also two new features based on wavelet transform are used to classifiy and lable the regions of the image. The hierarchical classifier is consisted of two Multilayer Perceptron (MLP classifiers and a Support Vector Machine (SVM classifier. The proposed algorithm is evaluated on a database consisting of document and non-document images that provides from Internet. The experimental results show the efficiency of the proposed approach in the region segmentation and classification. The proposed algorithm provides accuracy rate of 97.5% on classification of the regions.

Technical Support Document for Version 3.4.0 of the COMcheck Software

Energy Technology Data Exchange (ETDEWEB)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan; Halverson, Mark A.; Lucas, Robert G.; Richman, Eric E.; Schultz, Robert W.; Winiarski, David W.

2007-09-14

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989 and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.

CP-50 calibration facility radiological safety assessment document

International Nuclear Information System (INIS)

Chilton, M.W.; Hill, R.L.; Eubank, B.F.

1980-03-01

The CP-50 Calibration Facility Radiological Safety Assessment document, prepared at the request of the Nevada Operations Office of the US Department of Energy to satisfy provisions of ERDA Manual Chapter 0531, presents design features, systems controls, and procedures used in the operation of the calibration facility. Site and facility characteristics and routine and non-routine operations, including hypothetical incidents or accidents are discussed and design factors, source control systems, and radiation monitoring considerations are described

Community Documentation Centre on Industrial Risk. Bulletin no. 8

International Nuclear Information System (INIS)

Masera, M.; Rasmussen, K.

1993-01-01

The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

Community Documentation Centre on Industrial Risk. Bulletin no. 4

International Nuclear Information System (INIS)

Gow, H.B.F.

1991-01-01

The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

Community Documentation Centre on Industrial Risk. Bulletin no. 10

International Nuclear Information System (INIS)

Perschke, A.; Kirchsteiger, C.

1996-01-01

The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

Community Documentation Centre on Industrial Risk. Bulletin no. 5

International Nuclear Information System (INIS)

Gow, H.B.F.

1991-11-01

The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

Community Documentation Centre on Industrial Risk. Bulletin no. 7

International Nuclear Information System (INIS)

Gow, H.B.F.; Carditello, I.

1993-04-01

The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

Community Documentation Centre on Industrial Risk. Bulletin no. 9

International Nuclear Information System (INIS)

Perschke, A.

1995-01-01

The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

Community Documentation Centre on Industrial Risk. Bulletin no. 6

International Nuclear Information System (INIS)

Gow, H.B.F.

1992-06-01

The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

Community Documentation Centre on Industrial Risk. Bulletin no. 11

International Nuclear Information System (INIS)

Perschke, A.; Kirchsteiger, C.; Carnevali, C.

1997-01-01

The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

Survey of Forensic Document Examination Habit Areas: Degree of Use and Discriminatory Power

Energy Technology Data Exchange (ETDEWEB)

G Sperry; PA Manzolillo; RC Hanlan; RJ Muehlberger

1999-09-07

Beginning in 1998, the Pacific Northwest National Laboratory (PNL), US Postal Inspection Service Forensic Laboratory (USPIS), and the Data Fusion Laboratory, Drexel University (DFL) have been collaborating on a large scale research project ''Handwriting Individuality--Moving From Art to Science''. In April 1998 a survey was distributed to the community of forensic document examiners (FDEs) requesting input on the habit areas used and their utility in distinguishing handwriting. The information obtained from this survey was intended to provide the data necessary to select the criteria and begin the evaluation of the handwriting samples currently in the project. Preliminary results of the survey were made available to the community at the American Society of Questioned Document Examiners (ASQDE) meeting in August 1998 and the American Academy of Forensic Sciences (AAFS) meeting in February 1999. This report provides final documentation of the survey and its results. This survey has two objectives: (1) to compile a list of handwriting features and characteristics used by professional forensic document examiners in the examination and comparison of handwriting and (2) to gather information about the significance of these features and characteristics. These objectives are met by having the FDEs provide an indication of their experience in the frequency of habit area evaluation and the utility of the habit area for discrimination.

Innovative safety features of the modular HTGR

International Nuclear Information System (INIS)

Silady, F.A.; Simon, W.A.

1992-04-01

In this document the innovative safety features of the MHTGR are reviewed by examining the safety response to events challenging the functions relied on to retain radionuclides within the coated fuel particles. A broad range of challenges to core heat removal are examined, including a loss of helium pressure and a simultaneous loss of forced cool of the core

A DESCRIPTIVE SURVEY ON SMARTPHONES FEATURES FOR SUPPORTING THE ACADEMIC ACTIVITIES AT UNIVERSITAS PENDIDIKAN GANESHA

Directory of Open Access Journals (Sweden)

Nyoman Putri Rustrini

2016-09-01

Full Text Available The objectives of the study are to analyse the use of smartphones for lecturers and students in Universitas Pendidikan Ganesha which are measured based on the supporting factors of the smartphoness application and to analyse its features in academic activities. The data were collected by using questionnaires and analyzed by using a descriptive analysis method. This study showed that the level of smartphones use to support academic activities is categorized as very high with the motivation factor of 90. 51%. There are 3 groups of features that dominate the use of smartphones namely calculation, storage and documentation. The calculation feature was represented by calculator with the percentage of 99%. The storage feature was represented by contact, gallery, and dropbox with the precentages of 99%, 97%, and 71% respectively. The documentation feature was represented by camera, video and recorder with the percentages of 97%, 81%, and 51% respectively.

Environmental Information Document: L-reactor reactivation

International Nuclear Information System (INIS)

Mackey, H.E. Jr.

1982-04-01

Purpose of this Environmental Information Document is to provide background for assessing environmental impacts associated with the renovation, restartup, and operation of L Reactor at the Savannah River Plant (SRP). SRP is a major US Department of Energy installation for the production of nuclear materials for national defense. The purpose of the restart of L Reactor is to increase the production of nuclear weapons materials, such as plutonium and tritium, to meet projected needs in the nuclear weapons program

Environmental Information Document: L-reactor reactivation

Energy Technology Data Exchange (ETDEWEB)

Mackey, H.E. Jr. (comp.)

1982-04-01

Purpose of this Environmental Information Document is to provide background for assessing environmental impacts associated with the renovation, restartup, and operation of L Reactor at the Savannah River Plant (SRP). SRP is a major US Department of Energy installation for the production of nuclear materials for national defense. The purpose of the restart of L Reactor is to increase the production of nuclear weapons materials, such as plutonium and tritium, to meet projected needs in the nuclear weapons program.

Monitored Retrievable Storage System Requirements Document

International Nuclear Information System (INIS)

1994-03-01

This Monitored Retrievable Storage System Requirements Document (MRS-SRD) describes the functions to be performed and technical requirements for a Monitored Retrievable Storage (MRS) facility subelement and the On-Site Transfer and Storage (OSTS) subelement. The MRS facility subelement provides for temporary storage, at a Civilian Radioactive Waste Management System (CRWMS) operated site, of spent nuclear fuel (SNF) contained in an NRC-approved Multi-Purpose Canister (MPC) storage mode, or other NRC-approved storage modes. The OSTS subelement provides for transfer and storage, at Purchaser sites, of spent nuclear fuel (SNF) contained in MPCs. Both the MRS facility subelement and the OSTS subelement are in support of the CRWMS. The purpose of the MRS-SRD is to define the top-level requirements for the development of the MRS facility and the OSTS. These requirements include design, operation, and decommissioning requirements to the extent they impact on the physical development of the MRS facility and the OSTS. The document also presents an overall description of the MRS facility and the OSTS, their functions (derived by extending the functional analysis documented by the Physical System Requirements (PSR) Store Waste Document), their segments, and the requirements allocated to the segments. In addition, the top-level interface requirements of the MRS facility and the OSTS are included. As such, the MRS-SRD provides the technical baseline for the MRS Safety Analysis Report (SAR) design and the OSTS Safety Analysis Report design

Implementation of a Document Management System in an Operating Nuclear Power Plan

International Nuclear Information System (INIS)

Martinez Ladron de Guevara, J.

1996-01-01

The difficulty of implementing a document management system in an operating nuclear power plant basically lies in the high volume of information to be handled, in the different storage devices used and in the complexity of relations existing between the documentation and the physical elements of the facility. The documentation used in a power plant, mainly technical, is often stored on different devices (paper, microfilm, aperture cards, test files, vector files, raster files, etc) and usually features various identification criteria (engineering, manufacturing, plant staff, etc). Consequently, the system must be aimed at the management of multiformatted documentation, providing appropriate means of identification, capture and display for each case. The document management system must satisfy all information needs of each department of the plant, and should be adapted to the work cycles of the plant. Moreover, it should be integrated into other computer application in operation (maintenance, operation, procurement, etc), so that links can be established between the documentation and configuration elements. Although this is a complex procedure in operating power plants, there are integrating tools that facilitate the gradual implementation of this type of system. (Author)

Event characteristics and socio-demographic features of rape ...

African Journals Online (AJOL)

Objectives: On account of increasing awareness of the need for Post exposure prophylaxis (PEP) and availability of requisite drugs, victims of rape are now presenting at health facilities including ours to access PEP for HIV. This study set to document the socio-demographic features of these victims and the event ...

Automated 741 document preparation: Oak Ridge National Laboratory's Automated Safeguards Information System (OASIS)

International Nuclear Information System (INIS)

Austin, H.C.; Gray, L.M.

1982-01-01

OASIS has been providing for Oak Ridge National Laboratory's total safeguards needs since being place on line in April 1980. The system supports near real-time nuclear materials safeguards and accountability control. The original design of OASIS called for an automated facsimile of a 741 document to be prepared as a functional by-product of updating the inventory. An attempt was made to utilize, intact, DOE-Albuquerque's automated 741 system to generate the facsimile; however, the five page document produced proved too cumbersome. Albuquerque's programs were modified to print an original 741 document utilizing standard DOE/NRC 741 forms. It is felt that the best features of both the automated and manually generated 741 documents have been incorporated. Automation of the source data for 741 shipping documents produces greater efficiency while reducing possible errors. Through utilization of the standard DOE/NRC form, continuity within the NMMSS system is maintained, thus minimizing the confusion and redundancy associated with facsimiles. OASIS now fulfills the original concept of near real-time accountability by furnishing a viable 741 document as a function of updating the inventory

Computerising documentation

International Nuclear Information System (INIS)

Anon.

1992-01-01

The nuclear power generation industry is faced with public concern and government pressures over safety, efficiency and risk. Operators throughout the industry are addressing these issues with the aid of a new technology - technical document management systems (TDMS). Used for strategic and tactical advantage, the systems enable users to scan, archive, retrieve, store, edit, distribute worldwide and manage the huge volume of documentation (paper drawings, CAD data and film-based information) generated in building, maintaining and ensuring safety in the UK's power plants. The power generation industry has recognized that the management and modification of operation critical information is vital to the safety and efficiency of its power plants. Regulatory pressure from the Nuclear Installations Inspectorate (NII) to operate within strict safety margins or lose Site Licences has prompted the need for accurate, up-to-data documentation. A document capture and management retrieval system provides a powerful cost-effective solution, giving rapid access to documentation in a tightly controlled environment. The computerisation of documents and plans is discussed in this article. (Author)

The Impact of Kidney Development on the Life Course: A Consensus Document for Action

Science.gov (United States)

2017-01-01

Hypertension and chronic kidney disease (CKD) have a significant impact on global morbidity and mortality. The Low Birth Weight and Nephron Number Working Group has prepared a consensus document aimed to address the relatively neglected issue for the developmental programming of hypertension and CKD. It emerged from a workshop held on April 2, 2016, including eminent internationally recognized experts in the field of obstetrics, neonatology, and nephrology. Through multidisciplinary engagement, the goal of the workshop was to highlight the association between fetal and childhood development and an increased risk of adult diseases, focusing on hypertension and CKD, and to suggest possible practical solutions for the future. The recommendations for action of the consensus workshop are the results of combined clinical experience, shared research expertise, and a review of the literature. They highlight the need to act early to prevent CKD and other related noncommunicable diseases later in life by reducing low birth weight, small for gestational age, prematurity, and low nephron numbers at birth through coordinated interventions. Meeting the current unmet needs would help to define the most cost-effective strategies and to optimize interventions to limit or interrupt the developmental programming cycle of CKD later in life, especially in the poorest part of the world. PMID:28319949

Impact of Reconstruction Algorithms on CT Radiomic Features of Pulmonary Tumors: Analysis of Intra- and Inter-Reader Variability and Inter-Reconstruction Algorithm Variability.

Science.gov (United States)

Kim, Hyungjin; Park, Chang Min; Lee, Myunghee; Park, Sang Joon; Song, Yong Sub; Lee, Jong Hyuk; Hwang, Eui Jin; Goo, Jin Mo

2016-01-01

To identify the impact of reconstruction algorithms on CT radiomic features of pulmonary tumors and to reveal and compare the intra- and inter-reader and inter-reconstruction algorithm variability of each feature. Forty-two patients (M:F = 19:23; mean age, 60.43±10.56 years) with 42 pulmonary tumors (22.56±8.51mm) underwent contrast-enhanced CT scans, which were reconstructed with filtered back projection and commercial iterative reconstruction algorithm (level 3 and 5). Two readers independently segmented the whole tumor volume. Fifteen radiomic features were extracted and compared among reconstruction algorithms. Intra- and inter-reader variability and inter-reconstruction algorithm variability were calculated using coefficients of variation (CVs) and then compared. Among the 15 features, 5 first-order tumor intensity features and 4 gray level co-occurrence matrix (GLCM)-based features showed significant differences (palgorithms. As for the variability, effective diameter, sphericity, entropy, and GLCM entropy were the most robust features (CV≤5%). Inter-reader variability was larger than intra-reader or inter-reconstruction algorithm variability in 9 features. However, for entropy, homogeneity, and 4 GLCM-based features, inter-reconstruction algorithm variability was significantly greater than inter-reader variability (palgorithms. Inter-reconstruction algorithm variability was greater than inter-reader variability for entropy, homogeneity, and GLCM-based features.

Machine printed text and handwriting identification in noisy document images.

Science.gov (United States)

Zheng, Yefeng; Li, Huiping; Doermann, David

2004-03-01

In this paper, we address the problem of the identification of text in noisy document images. We are especially focused on segmenting and identifying between handwriting and machine printed text because: 1) Handwriting in a document often indicates corrections, additions, or other supplemental information that should be treated differently from the main content and 2) the segmentation and recognition techniques requested for machine printed and handwritten text are significantly different. A novel aspect of our approach is that we treat noise as a separate class and model noise based on selected features. Trained Fisher classifiers are used to identify machine printed text and handwriting from noise and we further exploit context to refine the classification. A Markov Random Field-based (MRF) approach is used to model the geometrical structure of the printed text, handwriting, and noise to rectify misclassifications. Experimental results show that our approach is robust and can significantly improve page segmentation in noisy document collections.

The pxarCore Library - Technical Documentation, Reference Manual, and Sample Applications

CERN Document Server

Spannagel, Simon; Perrey, Hanno Christopher

2015-01-01

This document describes the pxarCore library as of version 2.7, a versatile cross-platform library to program and read out devices featuring PSI46-type readout chips (ROCs) via the PSI digital test beoard (DTB). The design principles and features are presented together with an overview over possible configurations and use cases. The pxarCore library is built as flexible hardware interface and is capable of programming and reading out various combinations of ROCs. Most of the DTB firmware complexity is abstracted to allow users to address the attached devices via a simple yet versatile interface.

Politeness as a feature: so important and so rare

Directory of Open Access Journals (Sweden)

Corbett, Greville G.

2012-01-01

Full Text Available Politeness has a major place in many languages, and is remarkably pervasive in some. Yet we rarely find respect as a morphosyntactic feature, alongside gender, person, number and case. I document this imbalance, and then ask why this is what we find.

Technical Support Document for Version 3.9.1 of the COMcheck Software

Energy Technology Data Exchange (ETDEWEB)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan; Halverson, Mark A.; Lucas, Robert G.; Richman, Eric E.; Schultz, Robert W.; Winiarski, David W.

2012-09-01

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989 and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC and version 3.9.0 support for 2000 and 2001 IECC are no longer included, but those sections remain in this document for reference purposes.

GPU Based N-Gram String Matching Algorithm with Score Table Approach for String Searching in Many Documents

Science.gov (United States)

Srinivasa, K. G.; Shree Devi, B. N.

2017-10-01

String searching in documents has become a tedious task with the evolution of Big Data. Generation of large data sets demand for a high performance search algorithm in areas such as text mining, information retrieval and many others. The popularity of GPU's for general purpose computing has been increasing for various applications. Therefore it is of great interest to exploit the thread feature of a GPU to provide a high performance search algorithm. This paper proposes an optimized new approach to N-gram model for string search in a number of lengthy documents and its GPU implementation. The algorithm exploits GPGPUs for searching strings in many documents employing character level N-gram matching with parallel Score Table approach and search using CUDA API. The new approach of Score table used for frequency storage of N-grams in a document, makes the search independent of the document's length and allows faster access to the frequency values, thus decreasing the search complexity. The extensive thread feature in a GPU has been exploited to enable parallel pre-processing of trigrams in a document for Score Table creation and parallel search in huge number of documents, thus speeding up the whole search process even for a large pattern size. Experiments were carried out for many documents of varied length and search strings from the standard Lorem Ipsum text on NVIDIA's GeForce GT 540M GPU with 96 cores. Results prove that the parallel approach for Score Table creation and searching gives a good speed up than the same approach executed serially.

Evaluation of aspect-oriented frameworks in Python for extending a project with provenance documentation features

Directory of Open Access Journals (Sweden)

2011-08-01

Full Text Available In this paper we describe two sides of a real life use case of introducing an aspect-oriented framework into an industrial-grade project. This paper is divided into two parts: the selection process for an AOP framework in the Python programming language, and its use for modularized non-invasive recording of provenance data in a distributed data management tool. Criteria for the choice of such a framework are discussed and the background of provenance documentation is laid out.

Relevance of echo-structure and texture features

DEFF Research Database (Denmark)

Karemore, Gopal; Mullick, Jhinuk Basu; KV, Dr. Rajagopal

2010-01-01

Aim: Echostructure is an essential parameter for the evaluation of circumscribed lesions and can be described as a texture feature on ultrasound images. Present study evaluates the possibility of distinguishing between benign and malignant breast tumors using various texture features. Materials...... and Methods: 58 cases of breast tumor (29 each from benign and malignant) were documented under standardized conditions using a linear array machine and 7.5 MHz transducer. In each sonographic image, ROI of tumor was marked and then subjected to the evaluation of tumor status using five parameters of second...... performance ROC= 0.78(pbenign and malignant tumors. It also reveals that when evaluating images of a breast tumor...

A Transform-Based Feature Extraction Approach for Motor Imagery Tasks Classification

Science.gov (United States)

Khorshidtalab, Aida; Mesbah, Mostefa; Salami, Momoh J. E.

2015-01-01

In this paper, we present a new motor imagery classification method in the context of electroencephalography (EEG)-based brain–computer interface (BCI). This method uses a signal-dependent orthogonal transform, referred to as linear prediction singular value decomposition (LP-SVD), for feature extraction. The transform defines the mapping as the left singular vectors of the LP coefficient filter impulse response matrix. Using a logistic tree-based model classifier; the extracted features are classified into one of four motor imagery movements. The proposed approach was first benchmarked against two related state-of-the-art feature extraction approaches, namely, discrete cosine transform (DCT) and adaptive autoregressive (AAR)-based methods. By achieving an accuracy of 67.35%, the LP-SVD approach outperformed the other approaches by large margins (25% compared with DCT and 6 % compared with AAR-based methods). To further improve the discriminatory capability of the extracted features and reduce the computational complexity, we enlarged the extracted feature subset by incorporating two extra features, namely, Q- and the Hotelling’s \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{upgreek} \\usepackage{mathrsfs} \\setlength{\\oddsidemargin}{-69pt} \\begin{document} }{}$T^{2}$ \\end{document} statistics of the transformed EEG and introduced a new EEG channel selection method. The performance of the EEG classification based on the expanded feature set and channel selection method was compared with that of a number of the state-of-the-art classification methods previously reported with the BCI IIIa competition data set. Our method came second with an average accuracy of 81.38%. PMID:27170898

Electrochemically Smart Bimetallic Materials Featuring Group 11 Metals: In-situ Conductive Network Generation and Its Impact on Cell Capacity

Energy Technology Data Exchange (ETDEWEB)

Takeuchi, Esther [Stony Brook Univ., NY (United States)

2016-11-30

Our results for this program “Electrochemically smart bimetallic materials featuring Group 11 metals: in-situ conductive matrix generation and its impact on battery capacity, power and reversibility” have been highly successful: 1) we demonstrated material structures which generated in-situ conductive networks through electrochemical activation with increases in conductivity up to 10,000 fold, 2) we pioneered in situ analytical methodology to map the cathodes at several stages of discharge through the use of Energy Dispersive X-ray Diffraction (EDXRD) to elucidate the kinetic dependence of the conductive network formation, and 3) we successfully designed synthetic methodology for direct control of material properties including crystallite size and surface area which showed significant impact on electrochemical behavior.

Standards for maintenance documentation of COSMOS programs

International Nuclear Information System (INIS)

Burstall, R.F.; Rickets, T.M.; Butland, A.T.D.

1982-06-01

The Compatible Open Shop Modular Operating Scheme (COSMOS) is used for fast reactor neutronics and subassembly distortion calculations in the UK. It provides database and databank facilities for this purpose. A large number of applications programs use these facilities. This report sets down the standards agreed for use in the preparation of maintenance documents for these programs. These standards have been developed as the result of experience with earlier more complicated standards. Some of the terminology used in this report is particular to COSMOS, but the general features of the standard may be useful to those responsible for other computer programs. (author)

Parabolic features and the erosion rate on Venus

Science.gov (United States)

Strom, Robert G.

1993-01-01

The impact cratering record on Venus consists of 919 craters covering 98 percent of the surface. These craters are remarkably well preserved, and most show pristine structures including fresh ejecta blankets. Only 35 craters (3.8 percent) have had their ejecta blankets embayed by lava and most of these occur in the Atla-Beta Regio region; an area thought to be recently active. parabolic features are associated with 66 of the 919 craters. These craters range in size from 6 to 105 km diameter. The parabolic features are thought to be the result of the deposition of fine-grained ejecta by winds in the dense venusian atmosphere. The deposits cover about 9 percent of the surface and none appear to be embayed by younger volcanic materials. However, there appears to be a paucity of these deposits in the Atla-Beta Regio region, and this may be due to the more recent volcanism in this area of Venus. Since parabolic features are probably fine-grain, wind-deposited ejecta, then all impact craters on Venus probably had these deposits at some time in the past. The older deposits have probably been either eroded or buried by eolian processes. Therefore, the present population of these features is probably associated with the most recent impact craters on the planet. Furthermore, the size/frequency distribution of craters with parabolic features is virtually identical to that of the total crater population. This suggests that there has been little loss of small parabolic features compared to large ones, otherwise there should be a significant and systematic paucity of craters with parabolic features with decreasing size compared to the total crater population. Whatever is erasing the parabolic features apparently does so uniformly regardless of the areal extent of the deposit. The lifetime of parabolic features and the eolian erosion rate on Venus can be estimated from the average age of the surface and the present population of parabolic features.

Aircraft micro-doppler feature extraction from high range resolution profiles

CSIR Research Space (South Africa)

Berndt, RJ

2015-10-01

Full Text Available The use of high range resolution measurements and the micro-Doppler effect produced by rotating or vibrating parts of a target has been well documented. This paper presents a technique for extracting features related to helicopter rotors...

Information technology impact on nuclear power plant documentation. Report prepared within the framework of the International Working Group on Nuclear Power Plant Control and Instrumentation

International Nuclear Information System (INIS)

2002-04-01

related Advisory Group meeting on Information Technology Impact on NPP Design Process and Plant Documentation was held in Vienna, Austria in April 2000. This report is intended mainly for the use of plant managers, project managers, Instrumentation and Control (I and C) system designers, system engineers, operations managers, operators, and other plant information users

Information technology impact on nuclear power plant documentation. Report prepared within the framework of the International Working Group on Nuclear Power Plant Control and Instrumentation

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-04-01

related Advisory Group meeting on Information Technology Impact on NPP Design Process and Plant Documentation was held in Vienna, Austria in April 2000. This report is intended mainly for the use of plant managers, project managers, Instrumentation and Control (I and C) system designers, system engineers, operations managers, operators, and other plant information users.

Documentation Service

International Nuclear Information System (INIS)

Charnay, J.; Chosson, L.; Croize, M.; Ducloux, A.; Flores, S.; Jarroux, D.; Melka, J.; Morgue, D.; Mottin, C.

1998-01-01

This service assures the treatment and diffusion of the scientific information and the management of the scientific production of the institute as well as the secretariat operation for the groups and services of the institute. The report on documentation-library section mentions: the management of the documentation funds, search in international databases (INIS, Current Contents, Inspects), Pret-Inter service which allows accessing documents through DEMOCRITE network of IN2P3. As realizations also mentioned are: the setup of a video, photo database, the Web home page of the institute's library, follow-up of digitizing the document funds by integrating the CD-ROMs and diskettes, electronic archiving of the scientific production, etc

Structural differences and architectural features of two different polypropylene slings (TVT-O and I-STOP) have no impact on biocompatibility and tissue reactions.

Science.gov (United States)

Przydacz, Mikolaj; Adli, Oussama El Yazami; Mahfouz, Wally; Loutochin, Oleg; Bégin, Louis R; Corcos, Jacques

2017-06-30

To evaluate the impact of design features of the synthetic mid-urethral slings on tissue integrity and inflammatory responses. In total 30 female Sprague-Dawley rats were implanted with type I monofilamentous, macroporous polypropylene meshes: Gynecare TVT-Obturator tape ® (Ethicon Inc., Johnson & Johnson, Somerville, NJ, USA) and I-STOP ® (CL Medical Inc., Lyon, France). All animal groups were sacrificed at set time intervals - 6 weeks, 3 months, 6 months, 9 months and 12 months - and the abdominal wall was harvested with mesh strips for histological evaluation. All mesh strips appeared to be well incorporated into the abdominal wall, and no signs of shrinkage was noticed. All specimens showed a thin/delicate, loose, fibrous interface between the synthetic graft plate and abdominal wall, along with mild inflammatory reactions from 6 weeks to 12 months. Both mesh brands induced comparable, minimal foreign body reactions and integrated well into the host tissues despite differences in architectural features. TVT-O ® and I-STOP ® evoked similar low-grade inflammatory responses up to 12 months in this animal model. Structural differences and architectural features of polypropylene slings used in this study have had no impact on tissue integrity and inflammatory responses.

Cultural diversity: blind spot in medical curriculum documents, a document analysis.

Science.gov (United States)

Paternotte, Emma; Fokkema, Joanne P I; van Loon, Karsten A; van Dulmen, Sandra; Scheele, Fedde

2014-08-22

Cultural diversity among patients presents specific challenges to physicians. Therefore, cultural diversity training is needed in medical education. In cases where strategic curriculum documents form the basis of medical training it is expected that the topic of cultural diversity is included in these documents, especially if these have been recently updated. The aim of this study was to assess the current formal status of cultural diversity training in the Netherlands, which is a multi-ethnic country with recently updated medical curriculum documents. In February and March 2013, a document analysis was performed of strategic curriculum documents for undergraduate and postgraduate medical education in the Netherlands. All text phrases that referred to cultural diversity were extracted from these documents. Subsequently, these phrases were sorted into objectives, training methods or evaluation tools to assess how they contributed to adequate curriculum design. Of a total of 52 documents, 33 documents contained phrases with information about cultural diversity training. Cultural diversity aspects were more prominently described in the curriculum documents for undergraduate education than in those for postgraduate education. The most specific information about cultural diversity was found in the blueprint for undergraduate medical education. In the postgraduate curriculum documents, attention to cultural diversity differed among specialties and was mainly superficial. Cultural diversity is an underrepresented topic in the Dutch documents that form the basis for actual medical training, although the documents have been updated recently. Attention to the topic is thus unwarranted. This situation does not fit the demand of a multi-ethnic society for doctors with cultural diversity competences. Multi-ethnic countries should be critical on the content of the bases for their medical educational curricula.

New Science in Plain Sight: Optical Manifestations of Coupled Subauroral Features Documented by Citizen Scientists

Science.gov (United States)

MacDonald, E.; Heavner, M.; Kosar, B.; Case, N.; Donovan, E.; Spanswick, E.; Nishimura, Y.; Gallardo-Lacourt, B.

2017-12-01

Aurora has been observed and recorded by people for thousands of years. Recently, citizen scientists captured features of aurora-like arc events not previously described in the literature at subauroral latitudes. Amateur photo sequences show unusual flow, unstable composition changes, and field aligned structures. Observations from the Swarm satellite crossing the arc reveals thermal enhancement, density depletion, and strong westward ion flow. These signatures resemble features previously described from in situ observation however the optical manifestation is surprising and contains rich, unstable signatures as well. The relevant observations have presented important implications on a variety of open questions, including the fundamental definition of aurora, and limitations of jargon and subfield distinctions. This paper covers the discovery, its context, and the significant implications for the application of public participation measurement modes to the natural sciences whereby they can form a disruptive gap to expose new observing perspectives. Photo Credit: Notanee Bourassa, Alberta Aurora Chasers

FEATURES BASED ON NEIGHBORHOOD PIXELS DENSITY - A STUDY AND COMPARISON

Directory of Open Access Journals (Sweden)

Satish Kumar

2016-02-01

Full Text Available In optical character recognition applications, the feature extraction method(s used to recognize document images play an important role. The features are the properties of the pattern that can be statistical, structural and/or transforms or series expansion. The structural features are difficult to compute particularly from hand-printed images. The structure of the strokes present inside the hand-printed images can be estimated using statistical means. In this paper three features have been purposed, those are based on the distribution of B/W pixels on the neighborhood of a pixel in an image. We name these features as Spiral Neighbor Density, Layer Pixel Density and Ray Density. The recognition performance of these features has been compared with two more features Neighborhood Pixels Weight and Total Distances in Four Directions already studied in our work. We have used more than 20000 Devanagari handwritten character images for conducting experiments. The experiments are conducted with two classifiers i.e. PNN and k-NN.

Dealing with extreme data diversity: extraction and fusion from the growing types of document formats

Science.gov (United States)

David, Peter; Hansen, Nichole; Nolan, James J.; Alcocer, Pedro

2015-05-01

The growth in text data available online is accompanied by a growth in the diversity of available documents. Corpora with extreme heterogeneity in terms of file formats, document organization, page layout, text style, and content are common. The absence of meaningful metadata describing the structure of online and open-source data leads to text extraction results that contain no information about document structure and are cluttered with page headers and footers, web navigation controls, advertisements, and other items that are typically considered noise. We describe an approach to document structure and metadata recovery that uses visual analysis of documents to infer the communicative intent of the author. Our algorithm identifies the components of documents such as titles, headings, and body content, based on their appearance. Because it operates on an image of a document, our technique can be applied to any type of document, including scanned images. Our approach to document structure recovery considers a finer-grained set of component types than prior approaches. In this initial work, we show that a machine learning approach to document structure recovery using a feature set based on the geometry and appearance of images of documents achieves a 60% greater F1- score than a baseline random classifier.

Medical Isotopes Production Project: Molybdenum-99 and related isotopes - environmental impact statement. Volume II, comment response document

International Nuclear Information System (INIS)

1996-04-01

This Environmental Impact Statement (EIS) provides environmental and technical information concerning the U.S. Department of Energy's (DOE) proposal to establish a domestic source to produce molybdenum-99 (Mo-99) and related isotopes (iodine-131, xenon-133, and iodine-125). Mo-99, a radioactive isotope of the element molybdenum, decays to form metastable technetium-99 (Tc-99m), a radioactive isotope used thousands of times daily in medical diagnostic procedures in the U.S. Currently, all Mo-99 used in the U.S. is obtained from a single Canadian source. DOE is pursuing the Medical Isotopes Production Project in order to ensure that a reliable supply of Mo-99 is available to the U.S. medical community as soon as practicable. Under DOE's preferred alternative, the Chemistry and Metallurgy Research Facility at the Los Alamos National Laboratory (LANL) and the Annular Core Research Reactor and Hot Cell Facility at Sandia National Laboratories/New Mexico (SNL/NM) would be used for production of the medical isotopes. In addition, three other reasonable alternatives and a No Action alternative are analyzed in detail, The sites for these three reasonable alternatives are LANL, Oak Ridge National Laboratory (ORNL), and Idaho National Engineering Laboratory (INEL). The analyses in this EIS indicate no significant difference in the potential environmental impacts among the alternatives. Each of the alternatives would use essentially the same technology for the production of the medical isotopes. Minor differences in environmental impacts among alternatives relate to the extent of activity necessary to modify and restart (as necessary) existing reactors and hot cell facilities at each of the sites, the quantities of low-level radioactive waste generated, how such waste would be managed, and the length of time needed for initial and full production capacity. This document contains comments recieved from meetings held regarding the site selection for isotope production

Geological Mapping of Impact Melt Deposits at Lunar Complex Craters: New Insights into Morphological Diversity, Distribution and the Cratering Process

Science.gov (United States)

Dhingra, D.; Head, J. W., III; Pieters, C. M.

2014-12-01

We have completed high resolution geological mapping of impact melt deposits at the young lunar complex craters (wall and rim impact melt units and their relation to floor units have also been mapped. Among the distinctive features of these impact melt deposits are: 1) Impact Melt Wave Fronts: These are extensive (sometimes several kilometers in length) and we have documented their occurrence and distribution in different parts of the crater floor at Jackson and Tycho. These features emphasize melt mobility and style of emplacement during the modification stage of the craters. 2) Variations in Floor Elevations: Spatially extensive and coherent sections of crater floors have different elevations at all the three craters. The observed elevation differences could be caused by subsidence due to cooling of melt and/or structural failure, together with a contribution from regional slope. 3) Melt-Covered Megablocks: We also observe large blocks/rock-fragments (megablocks) covered in impact melt, which could be sections of collapsed wall or in some cases, subdued sections of central peaks. 4) Melt-Covered Central Peaks: Impact melt has also been mapped on the central peaks but varies in spatial extent among the craters. The presence of melt on peaks must be taken into account when interpreting peak mineralogy as exposures of deeper crust. 5) Boulder Distribution: Interesting trends are observed in the distribution of boulder units of various sizes; some impact melt units have spatially extensive boulders, while boulder distribution is very scarce in other units on the floor. We interpret these distributions to be influenced by a) the differential collapse of the crater walls during the modification stage, and b) the amount of relative melt volume retained in different parts of the crater floor. These observations provide important documentation of the morphological diversity and better understanding of the emplacement and final distribution of impact melt deposits.

The impact of cigarette pack shape, size and opening: evidence from tobacco company documents.

Science.gov (United States)

Kotnowski, Kathy; Hammond, David

2013-09-01

To use tobacco industry documents on cigarette pack shape, size and openings to identify industry findings on associations with brand imagery, product attributes, consumer perceptions and behaviour. Internal tobacco industry research and marketing documents obtained through court disclosure contained in the Legacy Tobacco Documents Library were searched using keywords related to pack shapes, sizes and opening methods. The search identified 66 documents related to consumer research and marketing plans on pack shape, size and openings, drawn from 1973 to 2002. Industry research consistently found that packs that deviated from the traditional flip-top box projected impressions of 'modern', 'elegant' and 'unique' brand imagery. Alternative pack shape and openings were identified as an effective means to communicate product attributes, particularly with regard to premium quality and smooth taste. Consumer studies consistently found that pack shape, size and opening style influenced perceptions of reduced product harm, and were often used to communicate a 'lighter' product. Slim, rounded, oval and booklet packs were found to be particularly appealing among young adults, and several studies demonstrated increased purchase interest for tobacco products presented in novel packaging shape or opening. Evidence from consumer tracking reports and company presentations indicate that pack innovations in shape or opening method increased market share of brands. Consumer research by the tobacco industry between 1973 and 2002 found that variations in packaging shape, size and opening method could influence brand appeal and risk perceptions and increase cigarette sales. © 2013 Society for the Study of Addiction.

Subject (of documents)

DEFF Research Database (Denmark)

Hjørland, Birger

2017-01-01

This article presents and discuss the concept “subject” or subject matter (of documents) as it has been examined in library and information science (LIS) for more than 100 years. Different theoretical positions are outlined and it is found that the most important distinction is between document......-oriented views versus request-oriented views. The document-oriented view conceive subject as something inherent in documents, whereas the request-oriented view (or the policy based view) understand subject as an attribution made to documents in order to facilitate certain uses of them. Related concepts...

Environmental information document defense waste processing facility

International Nuclear Information System (INIS)

1981-07-01

This report documents the impact analysis of a proposed Defense Waste Processing Facility (DWPF) for immobilizing high-level waste currently being stored on an interim basis at the Savannah River Plant (SRP). The DWPF will process the waste into a form suitable for shipment to and disposal in a federal repository. The DWPF will convert the high-level waste into: a leach-resistant form containing above 99.9% of all the radioactivity, and a residue of slightly contaminated salt. The document describes the SRP site and environs, including population, land and water uses; surface and subsurface soils and waters; meteorology; and ecology. A conceptual integrated facility for concurrently producing glass waste and saltcrete is described, and the environmental effects of constructing and operating the facility are presented. Alternative sites and waste disposal options are addressed. Also environmental consultations and permits are discussed

Reactive documentation system

Science.gov (United States)

Boehnlein, Thomas R.; Kramb, Victoria

2018-04-01

Proper formal documentation of computer acquired NDE experimental data generated during research is critical to the longevity and usefulness of the data. Without documentation describing how and why the data was acquired, NDE research teams lose capability such as their ability to generate new information from previously collected data or provide adequate information so that their work can be replicated by others seeking to validate their research. Despite the critical nature of this issue, NDE data is still being generated in research labs without appropriate documentation. By generating documentation in series with data, equal priority is given to both activities during the research process. One way to achieve this is to use a reactive documentation system (RDS). RDS prompts an operator to document the data as it is generated rather than relying on the operator to decide when and what to document. This paper discusses how such a system can be implemented in a dynamic environment made up of in-house and third party NDE data acquisition systems without creating additional burden on the operator. The reactive documentation approach presented here is agnostic enough that the principles can be applied to any operator controlled, computer based, data acquisition system.

Plant aging and design bases documentation

International Nuclear Information System (INIS)

Kelly, J.

1985-01-01

As interest in plant aging and lifetime extension continues to grow, the need to identify and capture the original design bases for the plant becomes more urgent. Decisions on lifetime extension and availability must be based on a rational understanding of design input, assumptions, and objectives. As operating plant time accumulates, the history of the early design begins to fade. The longer the utility waits, the harder it will be to re-establish the original design bases. Therefore, the time to develop this foundation is now. This paper demonstrates the impact that collecting and maintaining the original design bases of the plant can have on a utility's lifetime extension program. This impact becomes apparent when considering the technical, regulatory and financial aspects of lifetime extension. It is not good enough to know that the design information is buried somewhere in the corporate archives, and that given enough time, it could be retrieved. To be useful to the lifetime extension program, plant design information must be concise, readily available (i.e., retrievable), and easy to use. These objectives can only be met through a systematic program for collecting and presenting plant design documentation. To get the maximum benefit from a lifetime extension program, usable design bases documentation should be available as early in the plant life as possible. It will help identify areas that require monitoring today so that data is available to make rational decisions in the future

Enhancing the Early Reading Skills: Examining the Print Features of Preschool Children's Book

Science.gov (United States)

Cetin, Ozlem Simsek; Bay, Neslihan

2015-01-01

The purpose of this study is to examine the uses of print features in preschool children's books in the US and Turkey, in order to helping adults to understand print features and supporting children's print awareness. In this context, two hundred children's books was randomly selected from the US and Turkey. Document analysis was used for…

MO-DE-207B-04: Impact of Reconstruction Field of View On Radiomics Features in Computed Tomography (CT) Using a Texture Phantom

Energy Technology Data Exchange (ETDEWEB)

Shafiq ul Hassan, M; Zhang, G; Oliver, J; Moros, E [H Lee Moffitt Cancer Center and Research Institute, Tampa, FL (United States); Department of Physics, University of South Florida (United States); Latifi, K; Hunt, D; Guzman, R; Balagurunathan, Y; Gillies, R [H Lee Moffitt Cancer Center and Research Institute, Tampa, FL (United States); Mackin, D; Court, L [UT MD Anderson Cancer Center, Houston, TX (United States)

2016-06-15

Purpose: To investigate the impact of reconstruction Field of View on Radiomics features in computed tomography (CT) using a texture phantom. Methods: A rectangular Credence Cartridge Radiomics (CCR) phantom, composed of 10 different cartridges, was scanned on four different CT scanners from two manufacturers. A pre-defined scanning protocol was adopted for consistency. The slice thickness and reconstruction interval of 1.5 mm was used on all scanners. The reconstruction FOV was varied to result a voxel size ranging from 0.38 to 0.98 mm. A spherical region of interest (ROI) was contoured on the shredded rubber cartridge from CCR phantom CT scans. Ninety three Radiomics features were extracted from ROI using an in-house program. These include 10 shape, 22 intensity, 26 GLCM, 11 GLZSM, 11 RLM, 5 NGTDM and 8 fractal dimensional features. To evaluate the Interscanner variability across three scanners, a coefficient of variation (COV) was calculated for each feature group. Each group was further classified according to the COV by calculating the percentage of features in each of the following categories: COV≤ 5%, between 5 and 10% and ≥ 10%. Results: Shape features were the most robust, as expected, because of the spherical contouring of ROI. Intensity features were the second most robust with 54.5 to 64% of features with COV < 5%. GLCM features ranged from 31 to 35% for the same category. RLM features were sensitive to specific scanner and 5% variability was 9 to 54%. Almost all GLZM and NGTDM features showed COV ≥10% among the scanners. The dependence of fractal dimensions features on FOV was not consistent across different scanners. Conclusion: We concluded that reconstruction FOV greatly influence Radiomics features. The GLZSM and NGTDM are highly sensitive to FOV. funded in part by Grant NIH/NCI R01CA190105-01.

76 FR 57720 - Notice of Intent To Prepare an Environmental Impact Statement/Overseas Environmental Impact...

Science.gov (United States)

2011-09-16

...The Department of the Navy published a document in the Federal Register (76 FR 174) on September 8, 2011, concerning public scoping meetings to support the development of an Environmental Impact Statement/Overseas Environmental Impact Statement for the Mariana Islands Training and Testing Study Area. The document contained an incorrect scoping date.

Starlink Document Styles

Science.gov (United States)

Lawden, M. D.

This document describes the various styles which are recommended for Starlink documents. It also explains how to use the templates which are provided by Starlink to help authors create documents in a standard style. This paper is concerned mainly with conveying the ``look and feel" of the various styles of Starlink document rather than describing the technical details of how to produce them. Other Starlink papers give recommendations for the detailed aspects of document production, design, layout, and typography. The only style that is likely to be used by most Starlink authors is the Standard style.

The Role of Public Interaction with the Juno Mission: Documentation, Discussion, Selection and Processing of JunoCam Images of Jovian Cloud Features

Science.gov (United States)

Orton, Glenn; Hansen, Candice; Momary, Thomas; Bolton, Scott

2017-04-01

additional comments on features from their various points of view, but Juno's science team has no greater weighting in the voting process than the public at large, short of an extraordinary event, such as an impact event or a sudden atmospheric outburst. Public voting was tested for the first time on three regions for PJ3 and has continued for PJ4 and PJ5 with voting on nearly all non-polar images. One of the big challenges in this process was the accurate prediction of which features would be in the field of view at the time of the perijove some 10 days following the end of voting, due to Jupiter's differential rotation. The results of public processing and re-posting of JunoCam images have ranged all the way from artistic renditions up to professional-equivalent analysis that is equivalent to anything JunoCam team members could have produced. All aspects of this effort are available on the Mission Juno web site, linked to the JunoCam instrument (https://www.missionjuno.swri.edu/junocam/).

Use of Solr and Xapian in the Invenio document repository software

CERN Document Server

Glauner, Patrick; Le Meur, Jean-Yves; Simko, Tibor

2013-01-01

Invenio is a free comprehensive web-based document repository and digital library software suite originally developed at CERN. It can serve a variety of use cases from an institutional repository or digital library to a web journal. In order to fully use full-text documents for efficient search and ranking, Solr was integrated into Invenio through a generic bridge. Solr indexes extracted full-texts and most relevant metadata. Consequently, Invenio takes advantage of Solr’s efficient search and word similarity ranking capabilities. In this paper, we first give an overview of Invenio, its capabilities and features. We then present our open source Solr integration as well as scalability challenges that arose for an Invenio- based multi-million record repository: the CERN Document Server. We also compare our Solr adapter to an alternative Xapian adapter using the same generic bridge. Both integrations are distributed with the Invenio package and ready to be used by the institutions using or adopting Invenio.

Criteria Document for B-plant's Surveillance and Maintenance Phase Safety Basis Document

International Nuclear Information System (INIS)

SCHWEHR, B.A.

1999-01-01

This document is required by the Project Hanford Managing Contractor (PHMC) procedure, HNF-PRO-705, Safety Basis Planning, Documentation, Review, and Approval. This document specifies the criteria that shall be in the B Plant surveillance and maintenance phase safety basis in order to obtain approval of the DOE-RL. This CD describes the criteria to be addressed in the S and M Phase safety basis for the deactivated Waste Fractionization Facility (B Plant) on the Hanford Site in Washington state. This criteria document describes: the document type and format that will be used for the S and M Phase safety basis, the requirements documents that will be invoked for the document development, the deactivated condition of the B Plant facility, and the scope of issues to be addressed in the S and M Phase safety basis document

ENGINEERED BARRIER SYSTEM FEATURES, EVENTS AND PROCESSES

International Nuclear Information System (INIS)

Jaros, W.

2005-01-01

The purpose of this report is to evaluate and document the inclusion or exclusion of engineered barrier system (EBS) features, events, and processes (FEPs) with respect to models and analyses used to support the total system performance assessment for the license application (TSPA-LA). A screening decision, either Included or Excluded, is given for each FEP along with the technical basis for exclusion screening decisions. This information is required by the U.S. Nuclear Regulatory Commission (NRC) at 10 CFR 63.114 (d, e, and f) [DIRS 173273]. The FEPs addressed in this report deal with those features, events, and processes relevant to the EBS focusing mainly on those components and conditions exterior to the waste package and within the rock mass surrounding emplacement drifts. The components of the EBS are the drip shield, waste package, waste form, cladding, emplacement pallet, emplacement drift excavated opening (also referred to as drift opening in this report), and invert. FEPs specific to the waste package, cladding, and drip shield are addressed in separate FEP reports: for example, ''Screening of Features, Events, and Processes in Drip Shield and Waste Package Degradation'' (BSC 2005 [DIRS 174995]), ''Clad Degradation--FEPs Screening Arguments (BSC 2004 [DIRS 170019]), and Waste-Form Features, Events, and Processes'' (BSC 2004 [DIRS 170020]). For included FEPs, this report summarizes the implementation of the FEP in the TSPA-LA (i.e., how the FEP is included). For excluded FEPs, this analysis provides the technical basis for exclusion from TSPA-LA (i.e., why the FEP is excluded). This report also documents changes to the EBS FEPs list that have occurred since the previous versions of this report. These changes have resulted due to a reevaluation of the FEPs for TSPA-LA as identified in Section 1.2 of this report and described in more detail in Section 6.1.1. This revision addresses updates in Yucca Mountain Project (YMP) administrative procedures as they

Prominent feature extraction for review analysis: an empirical study

Science.gov (United States)

Agarwal, Basant; Mittal, Namita

2016-05-01

Sentiment analysis (SA) research has increased tremendously in recent times. SA aims to determine the sentiment orientation of a given text into positive or negative polarity. Motivation for SA research is the need for the industry to know the opinion of the users about their product from online portals, blogs, discussion boards and reviews and so on. Efficient features need to be extracted for machine-learning algorithm for better sentiment classification. In this paper, initially various features are extracted such as unigrams, bi-grams and dependency features from the text. In addition, new bi-tagged features are also extracted that conform to predefined part-of-speech patterns. Furthermore, various composite features are created using these features. Information gain (IG) and minimum redundancy maximum relevancy (mRMR) feature selection methods are used to eliminate the noisy and irrelevant features from the feature vector. Finally, machine-learning algorithms are used for classifying the review document into positive or negative class. Effects of different categories of features are investigated on four standard data-sets, namely, movie review and product (book, DVD and electronics) review data-sets. Experimental results show that composite features created from prominent features of unigram and bi-tagged features perform better than other features for sentiment classification. mRMR is a better feature selection method as compared with IG for sentiment classification. Boolean Multinomial Naïve Bayes) algorithm performs better than support vector machine classifier for SA in terms of accuracy and execution time.

Case histories of EA documents for nuclear waste

International Nuclear Information System (INIS)

Vocke, R.W.

1985-01-01

Nuclear power programs and policies in the United States have been subject to environmental assessment under the National Environmental Policy Act (NEPA) since 1971. NEPA documentation prepared for programmatic policy decision-making within the nuclear fuel cycle and concurrent federal policy are examined as they relate to radioactive waste management in this paper. Key programmatic environmental impact statements that address radioactive waste management include: the Atomic Energy Commission document on management of commercial high-level and transuranium-contaminated radioactive waste, which focussed on development of engineered retrievable surface storage facilities (RSSF); the Nuclear Regulatory Commission (NRC) document on use of recycled plutonium in mixed oxide fuel in light water cooled reactors, which focussed on plutonium recycle and RSSF; the NRC statement on handling of spent light water power reactor fuel, which focussed on spent fuel storage; and the Department of Energy (DOE) statement on management of commercially generated radioactive wastes, which focussed on development of deep geologic repositories. DOE is currently pursuing the deep geologic repository option, with monitored retrievable storage as a secondary option

Taking note of the perceived value and impact of medical student chart documentation on education and patient care.

Science.gov (United States)

Friedman, Erica; Sainte, Michelle; Fallar, Robert

2010-09-01

To determine the extent of restrictions to medical student documentation in patients' records and the opinions of medical education leaders about such restrictions' impact on medical student education and patient care. Education deans (n = 126) of medical schools in the United States and Canada were surveyed to determine policies regarding placement of medical student notes in the patient record, the value of medical students' documentation in the medical record, and the use of electronic medical records (EMRs) for patient notes. The instrument was a 23-item anonymous Web survey. Seventy-nine deans responded. Over 90% believed student notes belong in medical records, but only 42% had a policy regarding this. Ninety-three percent indicated that without student notes, student education would be negatively affected. Fewer (56%) indicated that patient care would be negatively affected. Most thought limiting students' notes would negatively affect several other issues: feeling a part of the team (96%), preparation for internship (95%), and students' sense of involvement (94%). Half (52%) reported that fourth-year students could place notes in paper charts at "all" affiliated hospitals, and 6% reported that fourth-year students could do so at "no" hospitals. Although students' ability to enter notes in patients' records is believed to be important for student education, only about half of all hospitals allow all students' notes in the EMR. Policies regarding placement of student notes should be implemented to ensure students' competency in note writing and their value as members of the patient care team.

The Non-motor Features of Essential Tremor: A Primary Disease Feature or Just a Secondary Phenomenon?

Directory of Open Access Journals (Sweden)

Ketan Jhunjhunwala

2014-08-01

Full Text Available Essential tremor (ET is a pathologically heterogeneous neurodegenerative disorder with both motor and increasingly recognized non-motor features. It is debated whether the non-motor manifestations in ET result from widespread neurodegeneration or are merely secondary to impaired motor functions and decreased quality of life due to tremor. It is important to review these features to determine how to best treat the non-motor symptoms of patients and to understand the basic pathophysiology of the disease and develop appropriate pharmacotherapies. In this review, retrospective and prospective clinical studies were critically analyzed to identify possible correlations between the severities of non-motor features and tremor. We speculated that if such a correlation existed, the non-motor features were likely to be secondary to tremor. According to the current literature, the deficits in executive function, attention, concentration, and memory often observed in ET are likely to be a primary manifestation of the disease. It has also been documented that patients with ET often exhibit characteristic personality traits. However, it remains to be determined whether the other non-motor features often seen in ET, such as anxiety, depression, and sleep disturbances are primary or secondary to motor manifestations of ET and subsequent poor quality of life. Finally, there is evidence that patients with ET can also have impaired color vision, disturbances of olfaction, and hearing impairments, though there are few studies in these areas. Further investigations of large cohorts of patients with ET are required to understand the prevalence, nature, and true significance of the non-motor features in ET.

Generic safety documentation model

International Nuclear Information System (INIS)

Mahn, J.A.

1994-04-01

This document is intended to be a resource for preparers of safety documentation for Sandia National Laboratories, New Mexico facilities. It provides standardized discussions of some topics that are generic to most, if not all, Sandia/NM facilities safety documents. The material provides a ''core'' upon which to develop facility-specific safety documentation. The use of the information in this document will reduce the cost of safety document preparation and improve consistency of information

Comparison of the 3.36 micrometer feature to the ISM

International Nuclear Information System (INIS)

Tokunaga, A.T.; Brooke, T.Y.

1988-01-01

It has been noted that the 3.36 micrometer emission feature is not the same as that of any ISM band at 3.4 micrometer. This is documented herein. There is no convincing analog to the cometary 3.36 micrometer emission feature seen in the Interstellar Matter band. This fact suggests that if the carbonaceous material in comets came from the ISM, it was either further processed in the solar nebula or has a different appearance because of the different excitation environment of the sun and ISM

Comparison of the 3.36 micrometer feature to the ISM

Science.gov (United States)

Tokunaga, Alan T.; Brooke, Timothy Y.

1988-01-01

It has been noted that the 3.36 micrometer emission feature is not the same as that of any ISM band at 3.4 micrometer. This is documented herein. There is no convincing analog to the cometary 3.36 micrometer emission feature seen in the Interstellar Matter band. This fact suggests that if the carbonaceous material in comets came from the ISM, it was either further processed in the solar nebula or has a different appearance because of the different excitation environment of the sun and ISM.

Mining the Text: 34 Text Features that Can Ease or Obstruct Text Comprehension and Use

Science.gov (United States)

White, Sheida

2012-01-01

This article presents 34 characteristics of texts and tasks ("text features") that can make continuous (prose), noncontinuous (document), and quantitative texts easier or more difficult for adolescents and adults to comprehend and use. The text features were identified by examining the assessment tasks and associated texts in the national…

The impact of educational status on the clinical features of major depressive disorder among Chinese women

Science.gov (United States)

Gan, Zhaoyu; Li, Yihan; Xie, Dong; Shao, Chunhong; Yang, Fuzhong; Shen, Yuan; Zhang, Ning; Zhang, Guanghua; Tian, Tian; Yin, Aihua; Chen, Ce; Liu, Jun; Tang, Chunling; Zhang, Zhuoqiu; Liu, Jia; Sang, Wenhua; Wang, Xumei; Liu, Tiebang; Wei, Qinling; Xu, Yong; Sun, Ling; Wang, Sisi; Li, Chang; Hu, Chunmei; Cui, Yanping; Liu, Ying; Li, Ying; Zhao, Xiaochuan; Zhang, Lan; Sun, Lixin; Chen, Yunchun; Zhang, Yueying; Ning, Yuping; Shi, Shenxun; Chen, Yiping; Kendler, Kenneth S.; Flint, Jonathan; Zhang, Jinbei

2012-01-01

Background Years of education are inversely related to the prevalence of major depressive disorder (MDD), but the relationship between the clinical features of MDD and educational status is poorly understood. We investigated this in 1970 Chinese women with recurrent MDD identified in a clinical setting. Methods Clinical and demographic features were obtained from 1970 Han Chinese women with DSM-IV major depression between 30 and 60 years of age across China. Analysis of linear, logistic and multiple logistic regression models were used to determine the association between educational level and clinical features of MDD. Results Subjects with more years of education are more likely to have MDD, with an odds ratio of 1.14 for those with more than ten years. Low educational status is not associated with an increase in the number of episodes, nor with increased rates of co-morbidity with anxiety disorders. Education impacts differentially on the symptoms of depression: lower educational attainment is associated with more biological symptoms and increased suicidal ideation and plans to commit suicide. Limitations Findings may not generalize to males or to other patient populations. Since the threshold for treatment seeking differs as a function of education there may an ascertainment bias in the sample. Conclusions The relationship between symptoms of MDD and educational status in Chinese women is unexpectedly complex. Our findings are inconsistent with the simple hypothesis from European and US reports that low levels of educational attainment increase the risk and severity of MDD. PMID:21824664

The impact of educational status on the clinical features of major depressive disorder among Chinese women.

Science.gov (United States)

Gan, Zhaoyu; Li, Yihan; Xie, Dong; Shao, Chunhong; Yang, Fuzhong; Shen, Yuan; Zhang, Ning; Zhang, Guanghua; Tian, Tian; Yin, Aihua; Chen, Ce; Liu, Jun; Tang, Chunling; Zhang, Zhuoqiu; Liu, Jia; Sang, Wenhua; Wang, Xumei; Liu, Tiebang; Wei, Qinling; Xu, Yong; Sun, Ling; Wang, Sisi; Li, Chang; Hu, Chunmei; Cui, Yanping; Liu, Ying; Li, Ying; Zhao, Xiaochuan; Zhang, Lan; Sun, Lixin; Chen, Yunchun; Zhang, Yueying; Ning, Yuping; Shi, Shenxun; Chen, Yiping; Kendler, Kenneth S; Flint, Jonathan; Zhang, Jinbei

2012-02-01

Years of education are inversely related to the prevalence of major depressive disorder (MDD), but the relationship between the clinical features of MDD and educational status is poorly understood. We investigated this in 1970 Chinese women with recurrent MDD identified in a clinical setting. Clinical and demographic features were obtained from 1970 Han Chinese women with DSM-IV major depression between 30 and 60 years of age across China. Analysis of linear, logistic and multiple logistic regression models were used to determine the association between educational level and clinical features of MDD. Subjects with more years of education are more likely to have MDD, with an odds ratio of 1.14 for those with more than ten years. Low educational status is not associated with an increase in the number of episodes, nor with increased rates of co-morbidity with anxiety disorders. Education impacts differentially on the symptoms of depression: lower educational attainment is associated with more biological symptoms and increased suicidal ideation and plans to commit suicide. Findings may not generalize to males or to other patient populations. Since the threshold for treatment seeking differs as a function of education there may an ascertainment bias in the sample. The relationship between symptoms of MDD and educational status in Chinese women is unexpectedly complex. Our findings are inconsistent with the simple hypothesis from European and US reports that low levels of educational attainment increase the risk and severity of MDD. Copyright © 2011 Elsevier B.V. All rights reserved.

Nonmotor Features in Atypical Parkinsonism.

Science.gov (United States)

Bhatia, Kailash P; Stamelou, Maria

2017-01-01

Atypical parkinsonism (AP) comprises mainly multiple system atrophy (MSA), progressive supranuclear palsy (PSP), and corticobasal degeneration (CBD), which are distinct pathological entities, presenting with a wide phenotypic spectrum. The classic syndromes are now called MSA-parkinsonism (MSA-P), MSA-cerebellar type (MSA-C), Richardson's syndrome, and corticobasal syndrome. Nonmotor features in AP have been recognized almost since the initial description of these disorders; however, research has been limited. Autonomic dysfunction is the most prominent nonmotor feature of MSA, but also gastrointestinal symptoms, sleep dysfunction, and pain, can be a feature. In PSP and CBD, the most prominent nonmotor symptoms comprise those deriving from the cognitive/neuropsychiatric domain. Apart from assisting the clinician in the differential diagnosis with Parkinson's disease, nonmotor features in AP have a big impact on quality of life and prognosis of AP and their treatment poses a major challenge for clinicians. © 2017 Elsevier Inc. All rights reserved.

The Impact Of Website Design Features On Behavioral Intentions

Directory of Open Access Journals (Sweden)

Chun-Chin Chiu

2015-08-01

Full Text Available The design of a website interface plays an important role in online purchasing and customers are more likely to visit and buy from better-designed websites. However previous studies have not provided consistent information about the features a website should provide. Based on Hausman and Siekpes 2009 comprehensive model this study aims to empirically verify whether the model can be applied in e-service markets to predict and explain website users behavioral intentions trade intentions and revisit intentions. Based on the data from a survey of 303 Internet users the results indicate that computer factors and human factors the key website design features are significantly related to website users experiences perceived usefulness perceived entertainment value and perceived informativeness in turn significantly affect the intermediary outcomes of attitude toward the site and ultimately influence users behavioral intentions.

High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 5

Energy Technology Data Exchange (ETDEWEB)

1994-04-01

The Fire Protection functional area for the Hanford Site Tank Farm facilities and support structures is based on the application of relevant DOE orders, regulations, and industry codes and standards. The fire protection program defined in this document may be divided into three areas: (1) organizational, (2) administrative programmatic features, and (3) technical features. The information presented in each section is in the form of program elements and orders, regulations, industry codes, and standards that serve as the attributes of a fire protection program for the Tank Farm facilities. Upon completion this document will be utilized as the basis to evaluate compliance of the fire protection program being implemented for the Tank Farm facilities with the requirements of DOE orders and industry codes and standards.

High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 5

International Nuclear Information System (INIS)

1994-04-01

The Fire Protection functional area for the Hanford Site Tank Farm facilities and support structures is based on the application of relevant DOE orders, regulations, and industry codes and standards. The fire protection program defined in this document may be divided into three areas: (1) organizational, (2) administrative programmatic features, and (3) technical features. The information presented in each section is in the form of program elements and orders, regulations, industry codes, and standards that serve as the attributes of a fire protection program for the Tank Farm facilities. Upon completion this document will be utilized as the basis to evaluate compliance of the fire protection program being implemented for the Tank Farm facilities with the requirements of DOE orders and industry codes and standards

Design features impacting mobile phone upgrading frequency

NARCIS (Netherlands)

Saaksjarvi, M.C.; Hellen, K.; Tuunanen, T.

2014-01-01

This study examines the impact of design on customer upgrading frequency, and differentiates between functional and aesthetic aspects of design. For the empirical study, we conducted an intercept survey in Beijing and Shanghai with Chinese consumers (n=170) in a retail mall setting. The survey’s

Inter-professional electronic documents and child health: a study of persisting non-electronic communication in the use of electronic documents.

Science.gov (United States)

Saario, Sirpa; Hall, Christopher; Peckover, Sue

2012-12-01

Information and communication technologies are widely used in health and social care settings to replace previous means of record keeping, assessment and communication. Commentary on the strengths and weaknesses of such systems abound, thus it is useful to examine how they are used in practice. This article draws on findings from two separate studies, conducted between 2005 and 2007, which examined how child health and welfare professionals use electronic documents in Finland and England. Known respectively as Miranda and CAF, these systems are different in terms of structure and function but in their everyday use common features are identified, notably the continued use of and reliance on non-electronic means of communication. Based on interviews with professionals, three forms of non-electronic communication are described: alternative records, phone calls and letters, which facilitate the sharing of the electronic record. Finally, the electronic documents are further analysed as potential boundary objects which aim to create common understanding between sites and professionals. Copyright © 2012 Elsevier Ltd. All rights reserved.

2002 reference document; Document de reference 2002

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

This 2002 reference document of the group Areva, provides information on the society. Organized in seven chapters, it presents the persons responsible for the reference document and for auditing the financial statements, information pertaining to the transaction, general information on the company and share capital, information on company operation, changes and future prospects, assets, financial position, financial performance, information on company management and executive board and supervisory board, recent developments and future prospects. (A.L.B.)

Documenting Employee Conduct

Science.gov (United States)

Dalton, Jason

2009-01-01

One of the best ways for a child care program to lose an employment-related lawsuit is failure to document the performance of its employees. Documentation of an employee's performance can provide evidence of an employment-related decision such as discipline, promotion, or discharge. When properly implemented, documentation of employee performance…

Health physics documentation

International Nuclear Information System (INIS)

Stablein, G.

1980-01-01

When dealing with radioactive material the health physicist receives innumerable papers and documents within the fields of researching, prosecuting, organizing and justifying radiation protection. Some of these papers are requested by the health physicist and some are required by law. The scope, quantity and deposit periods of the health physics documentation at the Karlsruhe Nuclear Research Center are presented and rationalizing methods discussed. The aim of this documentation should be the application of physics to accident prevention, i.e. documentation should protect those concerned and not the health physicist. (H.K.)

Safety assessment document for spent fuel handling, packaging, and storage demonstrations at the E-MAD facility on the Nevada Test Site

International Nuclear Information System (INIS)

1985-04-01

The objectives for spent fuel handling and packaging demonstration are to develop the capability to satisfactorily encapsulate typical commercial nuclear reactor spent fuel assemblies and to establish the suitability of interim dry surface and near surface storage concepts. To accomplish these objectives, spent fuel assemblies from a pressurized water reactor have been received, encapsulated in steel canisters, and emplaced in on-site storage facilities and subjected to other tests. As an essential element of these demonstrations, a thorough safety assessment of the demonstration activities conducted at the E-MAD facility has been completed. This document describes the site location and characteristics, the existing E-MAD facility, and the facility modifications and equipment additions made specifically for the demonstrations. The document also summarizes the Quality Assurance Program utilized, and specifies the principal design criteria applicable to the facility modifications, equipment additions, and process operations. Evaluations have been made of the radiological impacts of normal operations, abnormal operations, and postulated accidents. Analyses have been performed to determine the affects on nuclear criticality safety of postulated accidents and credible natural phenomena. The consequences of postulated accidents resulting in fission product gas release have also been estimated. This document identifies the engineered safety features, procedures, and site characteristics that (1) prevent the occurrence of potential accidents or (2) assure that the consequences of postulated accidents are either insignificant or adequately mitigated

Identifying and assessing ecotourism visitor impacts at selected protected areas in Costa Rica and Belize

Science.gov (United States)

Farrell, T.A.; Marion, J.L.

2001-01-01

Protected area visitation is an important component of ecotourism, and as such, must be sustainable. However, protected area visitation may degrade natural resources, particularly in areas of concentrated visitor activities like trails and recreation sites. This is an important concern in ecotourism destinations such as Belize and Costa Rica, because they actively promote ecotourism and emphasize the pristine qualities of their natural resources. Research on visitor impacts to protected areas has many potential applications in protected area management, though it has not been widely applied in Central and South America. This study targeted this deficiency through manager interviews and evaluations of alternative impact assessment procedures at eight protected areas in Belize and Costa Rica. Impact assessment procedures included qualitative condition class systems, ratings systems, and measurement-based systems applied to trails and recreation sites. The resulting data characterize manager perceptions of impact problems, document trail and recreation site impacts, and provide examples of inexpensive, efficient and effective rapid impact assessment procedures. Interview subjects reported a variety of impacts affecting trails, recreation sites, wildlife, water, attraction features and other resources. Standardized assessment procedures were developed and applied to record trail and recreation site impacts. Impacts affecting the study areas included trail proliferation, erosion and widening, muddiness on trails, vegetation cover loss, soil and root exposure, and tree damage on recreation sites. The findings also illustrate the types of assessment data yielded by several alternative methods and demonstrate their utility to protected area managers. The need for additional rapid assessment procedures for wildlife, water, attraction feature and other resource impacts was also identified.

Out of Africa: modern human origins special feature: the origin of Neandertals.

Science.gov (United States)

Hublin, J J

2009-09-22

Western Eurasia yielded a rich Middle (MP) and Late Pleistocene (LP) fossil record documenting the evolution of the Neandertals that can be analyzed in light of recently acquired paleogenetical data, an abundance of archeological evidence, and a well-known environmental context. Their origin likely relates to an episode of recolonization of Western Eurasia by hominins of African origin carrying the Acheulean technology into Europe around 600 ka. An enhancement of both glacial and interglacial phases may have played a crucial role in this event, as well as in the subsequent evolutionary history of the Western Eurasian populations. In addition to climatic adaptations and an increase in encephalization, genetic drift seems to have played a major role in their evolution. To date, a clear speciation event is not documented, and the most likely scenario for the fixation of Neandertal characteristics seems to be an accretion of features along the second half of the MP. Although a separation time for the African and Eurasian populations is difficult to determine, it certainly predates OIS 11 as phenotypic Neandertal features are documented as far back as and possibly before this time. It is proposed to use the term "Homo rhodesiensis" to designate the large-brained hominins ancestral to H. sapiens in Africa and at the root of the Neandertals in Europe, and to use the term "Homo neanderthalensis" to designate all of the specimens carrying derived metrical or non-metrical features used in the definition of the LP Neandertals.

Hand and wrist arthritis of Behcet disease: Imaging features

International Nuclear Information System (INIS)

Sugawara, Shunsuke; Ehara, Shigeru; Hitachi, Shin; Sugimoto, Hideharu

2010-01-01

Background: Reports on arthritis in Behcet disease are relatively scarce, and imaging features vary. Purpose: To document the various imaging features of articular disorders of the hand and wrist in Behcet disease. Material and Methods: Four patients, four women aged 26 to 65 years, fulfilling the diagnostic criteria of Behcet disease, with imaging findings of hand and wrist arthritis, were seen in two institutions. Radiography and magnetic resonance (MR) imaging were studied to elucidate the pattern and distribution. Results: Both non-erosive arthritis and erosive arthritis of different features were noted: one with non-erosive synovitis of the wrist, one with wrist synovitis with minimal erosion, and two with erosive arthritis of the distal interphalangeal joint. Conclusion: Imaging manifestations of arthritis of Behcet disease vary, and may be similar to other seronegative arthritides

75 FR 67996 - Environmental Documents Prepared for Proposed Oil, Gas, and Mineral Operations by the Gulf of...

Science.gov (United States)

2010-11-04

... Environmental Documents Prepared for Proposed Oil, Gas, and Mineral Operations by the Gulf of Mexico Outer... regarding whether those effects have significant impacts. Environmental Assessments are used to evaluate.... ACTION: Notice of the Availability of Environmental Documents Prepared for OCS Mineral Proposals by the...

Standardization Documents

Science.gov (United States)

2011-08-01

Specifications and Standards; Guide Specifications; CIDs; and NGSs . Learn. Perform. Succeed. STANDARDIZATION DOCUMENTS Federal Specifications Commercial...national or international standardization document developed by a private sector association, organization, or technical society that plans ...Maintain lessons learned • Examples: Guidance for application of a technology; Lists of options Learn. Perform. Succeed. DEFENSE HANDBOOK

Proctographic features of anismus.

Science.gov (United States)

Halligan, S; Bartram, C I; Park, H J; Kamm, M A

1995-12-01

To document the proctographic features of anismus at evacuation proctography and determine the optimum radiologic measurements for diagnosis. Twenty-four patients with anismus according to clinical and multiple physiologic criteria were examined with evacuation proctography. Structural and functional measurements were compared with those of a group of 20 asymptomatic subjects. No significant difference between patients and control subjects was found with respect to pelvic descent, rectocele, or any anorectal angle measurement. In patients with anismus, initiation of evacuation was prolonged (median, 9 vs 3 seconds for control subjects; P anismus should be abandoned. Patients with anismus demonstrate delayed initiation of evacuation, which is also prolonged and incomplete. Incomplete evacuation after 30 seconds is highly suggestive of anismus.

The National Library of Kosovo "PJETER Bogdani" Rapid Condition Assessment and Documentation

Science.gov (United States)

Eppich, R.; Ramku, B.; Binakaj, N.

2017-08-01

The National Library of Kosovo "Pjetër Bogdani" is a symbol of Prishtina, Kosovo and the quest for knowledge. It is simultaneously an icon of modernity and symbol of the past. Unfortunately, it suffered through the Kosovo war and neglect in times of economic difficulty. It was also unfortunately featured in the British newspaper The Telegraph in their travel section: "One of the world's 30 ugliest buildings?" In late 2015 the Kosovo Architectural Foundation, a non-profit dedicated to spirit of creating and preserving unique architecture, became concerned with the reputation and condition of the Library and contacted the Kosovo Ministry of Culture, visited the site and initiated a project to raise awareness and document this modern masterpiece. The Getty Foundation and their Keeping it Modern grant program awarded funding for initial condition assessment, documentation, capacity building and investigations. This paper discusses the project to document and improve the image and awareness of this important structure and set priorities for its future.

The Impact of Magnesium Oxide on the Hydratation and Features of Mechanicaly Activated Phosphogypsum

Directory of Open Access Journals (Sweden)

Andrejus Jefimovas

2011-04-01

Full Text Available Extractive hemihydrate phosphogypsum (E-PG is the most popular mineral waste in Lithuania. The dumps of that are rapidly growing and the question of possible use still remains open. Phosphogypsum is obtained during the process of extracting phosphoric acid from apatite using sulphuric acid. Due to low activity and contamination with acidic mineral admixtures (phosphorus and fluorine compounds, this technogenic product cannot be used for producing construction materials. Instead of present energy consuming processes used for neutralisation, another method – mechanical activation neutralizing acid admixtures with cement and opoka mix is offered. Whereas cement and opoka are grey, the items made of phosphogypsum (neutralised using these admixtures are dark. Research was made trying to find out the possibility of gaining the white binder from phosphogypsum. In order to achieve that magnesium oxide was chosen to neutralise phosphogypsum and its impact on E-PG, hydratation and features were studied.Article in Lithuanian

Interplay of static and dynamic features in biomimetic smart ears.

Science.gov (United States)

Pannala, Mittu; Meymand, Sajjad Zeinoddini; Müller, Rolf

2013-06-01

Horseshoe bats (family Rhinolophidae) have sophisticated biosonar systems with outer ears (pinnae) that are characterized by static local shape features as well as dynamic non-rigid changes to their overall shapes. Here, biomimetic prototypes fabricated from elastic rubber sheets have been used to study the impact of these static and dynamic features on the acoustic device characteristics. The basic shape of the prototypes was an obliquely truncated horn augmented with three static local shape features: vertical ridge, pinna-rim incision and frontal flap (antitragus). The prototype shape was deformed dynamically using a one-point actuation mechanism to produce a biomimetic bending of the prototype's tip. In isolation, the local shape features had little impact on the device beampattern. However, strong interactions were observed between these features and the overall deformation. The further the prototype tip was bent down, the stronger the beampatterns associated with combinations of multiple features differed from the upright configuration in the prominence of sidelobes. This behavior was qualitatively similar to numerical predictions for horseshoe bats. Hence, the interplay between static and dynamic features could be a bioinspired principle for affecting large changes through the dynamic manipulations of interactions that are sensitive to small geometrical changes.

Opinion mining feature-level using Naive Bayes and feature extraction based analysis dependencies

Science.gov (United States)

Sanda, Regi; Baizal, Z. K. Abdurahman; Nhita, Fhira

2015-12-01

Development of internet and technology, has major impact and providing new business called e-commerce. Many e-commerce sites that provide convenience in transaction, and consumers can also provide reviews or opinions on products that purchased. These opinions can be used by consumers and producers. Consumers to know the advantages and disadvantages of particular feature of the product. Procuders can analyse own strengths and weaknesses as well as it's competitors products. Many opinions need a method that the reader can know the point of whole opinion. The idea emerged from review summarization that summarizes the overall opinion based on sentiment and features contain. In this study, the domain that become the main focus is about the digital camera. This research consisted of four steps 1) giving the knowledge to the system to recognize the semantic orientation of an opinion 2) indentify the features of product 3) indentify whether the opinion gives a positive or negative 4) summarizing the result. In this research discussed the methods such as Naï;ve Bayes for sentiment classification, and feature extraction algorithm based on Dependencies Analysis, which is one of the tools in Natural Language Processing (NLP) and knowledge based dictionary which is useful for handling implicit features. The end result of research is a summary that contains a bunch of reviews from consumers on the features and sentiment. With proposed method, accuration for sentiment classification giving 81.2 % for positive test data, 80.2 % for negative test data, and accuration for feature extraction reach 90.3 %.

RECOVERY OF DOCUMENT TEXT FROM TORN FRAGMENTS USING IMAGE PROCESSING

OpenAIRE

C.Prasad; Dr.Mahesh; Dr.S.A.K. Jilani

2016-01-01

Recovery of document from its torn or damaged fragments play an important role in the field of forensics and archival study. Reconstruction of the torn papers manually with the help of glue and tapes etc., is tedious, time consuming and not satisfactory. For torn images reconstruction we go for image mosaicing, where we reconstruct the image using features (corners) and RANSAC with homography.But for the torn fragments there is no such similarity portion between fragments. Hence we propose a ...

Fast words boundaries localization in text fields for low quality document images

Science.gov (United States)

Ilin, Dmitry; Novikov, Dmitriy; Polevoy, Dmitry; Nikolaev, Dmitry

2018-04-01

The paper examines the problem of word boundaries precise localization in document text zones. Document processing on a mobile device consists of document localization, perspective correction, localization of individual fields, finding words in separate zones, segmentation and recognition. While capturing an image with a mobile digital camera under uncontrolled capturing conditions, digital noise, perspective distortions or glares may occur. Further document processing gets complicated because of its specifics: layout elements, complex background, static text, document security elements, variety of text fonts. However, the problem of word boundaries localization has to be solved at runtime on mobile CPU with limited computing capabilities under specified restrictions. At the moment, there are several groups of methods optimized for different conditions. Methods for the scanned printed text are quick but limited only for images of high quality. Methods for text in the wild have an excessively high computational complexity, thus, are hardly suitable for running on mobile devices as part of the mobile document recognition system. The method presented in this paper solves a more specialized problem than the task of finding text on natural images. It uses local features, a sliding window and a lightweight neural network in order to achieve an optimal algorithm speed-precision ratio. The duration of the algorithm is 12 ms per field running on an ARM processor of a mobile device. The error rate for boundaries localization on a test sample of 8000 fields is 0.3

Feature selection toolbox software package

Czech Academy of Sciences Publication Activity Database

Pudil, Pavel; Novovičová, Jana; Somol, Petr

2002-01-01

Roč. 23, č. 4 (2002), s. 487-492 ISSN 0167-8655 R&D Projects: GA ČR GA402/01/0981 Institutional research plan: CEZ:AV0Z1075907 Keywords : pattern recognition * feature selection * loating search algorithms Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 0.409, year: 2002

ENGINEERED BARRIER SYSTEM FEATURES, EVENTS AND PROCESSES

Energy Technology Data Exchange (ETDEWEB)

Jaros, W.

2005-08-30

The purpose of this report is to evaluate and document the inclusion or exclusion of engineered barrier system (EBS) features, events, and processes (FEPs) with respect to models and analyses used to support the total system performance assessment for the license application (TSPA-LA). A screening decision, either Included or Excluded, is given for each FEP along with the technical basis for exclusion screening decisions. This information is required by the U.S. Nuclear Regulatory Commission (NRC) at 10 CFR 63.114 (d, e, and f) [DIRS 173273]. The FEPs addressed in this report deal with those features, events, and processes relevant to the EBS focusing mainly on those components and conditions exterior to the waste package and within the rock mass surrounding emplacement drifts. The components of the EBS are the drip shield, waste package, waste form, cladding, emplacement pallet, emplacement drift excavated opening (also referred to as drift opening in this report), and invert. FEPs specific to the waste package, cladding, and drip shield are addressed in separate FEP reports: for example, ''Screening of Features, Events, and Processes in Drip Shield and Waste Package Degradation'' (BSC 2005 [DIRS 174995]), ''Clad Degradation--FEPs Screening Arguments (BSC 2004 [DIRS 170019]), and Waste-Form Features, Events, and Processes'' (BSC 2004 [DIRS 170020]). For included FEPs, this report summarizes the implementation of the FEP in the TSPA-LA (i.e., how the FEP is included). For excluded FEPs, this analysis provides the technical basis for exclusion from TSPA-LA (i.e., why the FEP is excluded). This report also documents changes to the EBS FEPs list that have occurred since the previous versions of this report. These changes have resulted due to a reevaluation of the FEPs for TSPA-LA as identified in Section 1.2 of this report and described in more detail in Section 6.1.1. This revision addresses updates in Yucca Mountain Project

A physician-led initiative to improve clinical documentation results in improved health care documentation, case mix index, and increased contribution margin.

Science.gov (United States)

Aiello, Francesco A; Judelson, Dejah R; Durgin, Jonathan M; Doucet, Danielle R; Simons, Jessica P; Durocher, Dawn M; Flahive, Julie M; Schanzer, Andres

2018-05-04

Clinical documentation is the key determinant of inpatient acuity of illness and payer reimbursement. Every inpatient hospitalization is placed into a diagnosis related group with a relative value based on documented procedures, conditions, comorbidities and complications. The Case Mix Index (CMI) is an average of these diagnosis related groups and directly impacts physician profiling, medical center profiling, reimbursement, and quality reporting. We hypothesize that a focused, physician-led initiative to improve clinical documentation of vascular surgery inpatients results in increased CMI and contribution margin. A physician-led coding initiative to educate physicians on the documentation of comorbidities and conditions was initiated with concurrent chart review sessions with coding specialists for 3 months, and then as needed, after the creation of a vascular surgery documentation guide. Clinical documentation and billing for all carotid endarterectomy (CEA) and open infrainguinal procedures (OIPs) performed between January 2013 and July 2016 were stratified into precoding and postcoding initiative groups. Age, duration of stay, direct costs, actual reimbursements, contribution margin (CM), CMI, rate of complication or comorbidity, major complication or comorbidity, severity of illness, and risk of mortality assigned to each discharge were abstracted. Data were compared over time by standardizing Centers for Medicare and Medicaid Services (CMS) values for each diagnosis related group and using a CMS base rate reimbursement. Among 458 CEA admissions, postcoding initiative CEA patients (n = 253) had a significantly higher CMI (1.36 vs 1.25; P = .03), CM ($7859 vs $6650; P = .048), and CMS base rate reimbursement ($8955 vs $8258; P = .03) than precoding initiative CEA patients (n = 205). The proportion of admissions with a documented major complication or comorbidity and complication or comorbidity was significantly higher after the coding initiative (43% vs

Features, Events, and Processes: System Level

Energy Technology Data Exchange (ETDEWEB)

D. McGregor

2004-04-19

The primary purpose of this analysis is to evaluate System Level features, events, and processes (FEPs). The System Level FEPs typically are overarching in nature, rather than being focused on a particular process or subsystem. As a result, they are best dealt with at the system level rather than addressed within supporting process-level or subsystem level analyses and models reports. The System Level FEPs also tend to be directly addressed by regulations, guidance documents, or assumptions listed in the regulations; or are addressed in background information used in development of the regulations. This evaluation determines which of the System Level FEPs are excluded from modeling used to support the total system performance assessment for license application (TSPA-LA). The evaluation is based on the information presented in analysis reports, model reports, direct input, or corroborative documents that are cited in the individual FEP discussions in Section 6.2 of this analysis report.

Impact of load-related neural processes on feature binding in visuospatial working memory.

Directory of Open Access Journals (Sweden)

Nicole A Kochan

Full Text Available BACKGROUND: The capacity of visual working memory (WM is substantially limited and only a fraction of what we see is maintained as a temporary trace. The process of binding visual features has been proposed as an adaptive means of minimising information demands on WM. However the neural mechanisms underlying this process, and its modulation by task and load effects, are not well understood. OBJECTIVE: To investigate the neural correlates of feature binding and its modulation by WM load during the sequential phases of encoding, maintenance and retrieval. METHODS AND FINDINGS: 18 young healthy participants performed a visuospatial WM task with independent factors of load and feature conjunction (object identity and position in an event-related functional MRI study. During stimulus encoding, load-invariant conjunction-related activity was observed in left prefrontal cortex and left hippocampus. During maintenance, greater activity for task demands of feature conjunction versus single features, and for increased load was observed in left-sided regions of the superior occipital cortex, precuneus and superior frontal cortex. Where these effects were expressed in overlapping cortical regions, their combined effect was additive. During retrieval, however, an interaction of load and feature conjunction was observed. This modulation of feature conjunction activity under increased load was expressed through greater deactivation in medial structures identified as part of the default mode network. CONCLUSIONS AND SIGNIFICANCE: The relationship between memory load and feature binding qualitatively differed through each phase of the WM task. Of particular interest was the interaction of these factors observed within regions of the default mode network during retrieval which we interpret as suggesting that at low loads, binding processes may be 'automatic' but at higher loads it becomes a resource-intensive process leading to disengagement of activity in this

How Blockchain Could Be Implemented for Exchanging Documentation in the Shipping Industry

DEFF Research Database (Denmark)

Loklindt, Christopher; Moeller, Marc-Philip; Kinra, Aseem

2018-01-01

The purpose of this study is to investigate the conditions under which blockchain technology can be adopted and the design criteria that are needed for exchanging shipping documentation in containerized shipping. To alleviate the impact of current documentation exchange mechanisms on supply chain...... efficiency in the maritime industry, this study aims at presenting guidelines for leveraging blockchain technology as a solution for exchanging documentation in the shipping industry. We conduct semi-structured interviews with representatives from business, IT, and public institutions. This qualitative data...... is analyzed through a theoretical framework comprising transaction cost economics, diffusion of innovation and design theory. Based on the theoretical model and stakeholder analysis, a set of eight design principles are proposed for the successful implementation of blockchain. These are (1) Immutability, (2...

[Exploring models for the assessment of the economic, social, political, and scientific impact of health research].

Science.gov (United States)

Macías-Angel, Beatriz; Agudelo-Calderón, Carlos A

2015-05-01

Health research produces effects on the health of populations. This document approaches the frameworks and the models used by developed countries to assess the impact of health research through documentary analysis of research with the highest impact. With this, it was possible to identify two guiding axes of analysis: one having to do with focus, and the other having to do with emphasis. With these, the published models, their uses, their reach, and their origins are related. Our study brings awareness to the features they have and the areas in which Colombia could implement them. We found that the framework for evaluating health research known as the "payback model" is a model for monitoring research that tracks the process and research results with multidimensional categorization of the impacts of research.

Synthesis document on the long time behavior of packages: operational document ''bituminous'' 2204

International Nuclear Information System (INIS)

Tiffreau, C.

2004-09-01

This document is realized in the framework of the law of 1991 on the radioactive wastes management. The 2004 synthesis document on long time behavior of bituminous sludges packages is constituted by two documents, the reference document and the operational document. This paper presents the operational model describing the water alteration of the packages and the associated radioelements release, as the gas term source and the swelling associated to the self-irradiation and the bituminous radiolysis. (A.L.B.)

Internationalization Impact on PhD Training Policy in Russia: Insights from The Comparative Document Analysis

Directory of Open Access Journals (Sweden)

Oksana Chigisheva

2017-09-01

Full Text Available The relevance of the study is due to the need for an objective picture of the Russian third level tertiary education transformation driven by internationalization issues and global trends in education. The article provides an analytical comparative review of the official documents related to the main phases of education reform in Russia and focuses on the system of PhD training which has undergone significant reorganization in recent years. A series of alterations introduced into the theory and practice of postgraduate education in Russia are traced in regulatory documents and interpreted in terms of growing internationalization demand. Possible implications for further development of the research human potential in Russia are being discussed. The method of comparative document analysis produces the best possible insight into the subject. The findings of the study contribute to the understanding of current challenges facing the system of doctoral studies in Russia and lead to certain conclusions on the transformation of educational policy in relation to PhD training under the influence of internationalization agenda.

Case histories of environmental assessment documents for nuclear waste

International Nuclear Information System (INIS)

Vocke, R.W.

1985-01-01

Nuclear power programs and policies in the United States have been subject to environmental assessment under the National Environmental Policy Act (NEPA) since 1971. NEPA documentation prepared for programmatic policy decision-making fuel cycle and concurrent federal policy are examined as they relate to radioactive waste management in this paper. Key programmatic environmental impact statements that address radioactive waste management include: the Atomic Energy Commission document on management of commercial high level and transuranium-contaminated radioactive waste, which focussed on development of engineered retrievable surface storage facilities (RSSF); the Nuclear Regulatory Commission (NRC) document on use of recycled plutonium in mixed oxide fuel in light water cooled reactors, which focussed on plutonium recycle and RSSF; the NRC statement on handling of spent light water power reactor fuel, which focussed on spent fuel storage; and the Department of Energy (DOE) statement on management of commercially generated radioactive wastes, which focussed on development of deep geologic repositories. DOE is currently pursuing the deep geologic repository option, with monitored retrievable storage as a secondary option

Documenting the Impact of Socioeconomic Dynamics on Heritage Sites. The Case of Vista Alegre District in Santiago de Cuba

Science.gov (United States)

Caballero, L. B.; Castillo, M. M.; Van Balen, K.

2017-08-01

Recent policies adopted in Cuba are producing a significant turn into the country's socioeconomic dynamics. Past shifting circumstances have demonstrated the positive and negative implications on heritage sites. In this regard, this paper presents a first stage of a research project aimed at monitoring the impact of socioeconomic dynamics on local heritage sites. The research partial results focus on the documentation of the evolution of a case study: Vista Alegre District in the city of Santiago de Cuba. Scholars have noted that the District's urban design and historic building stock represent its most significant heritage values. Such qualities are under permanent threat due to transformations and deterioration. In order to analyse current site condition, and to understand transformations as a result of socioeconomic dynamics, a Geographic Information System (GIS) was implemented as a monitoring and documenting tool. The GIS allowed integrating data related to the evolution of the urban layout, and the heritage buildings. Data was sourced from heritage management and urban planning offices, as well as from previous studies on the site. In addition, the analysis of remote sensing imagery, and a field survey helped to update the existing records, and to include new information with the purpose of assessing the integrity of heritage values. At this stage, maps that describe the site evolution, the significant changes over time, and the alterations to character defining elements served to identify sectors of different scenic qualities. Results are essential to contribute to draft management strategies as part of decision making.

Discrete features of sedentary behavior impact cardiometabolic risk factors.

Science.gov (United States)

Lyden, Kate; Keadle, Sarah Kozey; Staudenmayer, John; Braun, Barry; Freedson, Patty S

2015-05-01

Sedentary behavior is linked to numerous poor health outcomes. This study aims to determine the effects of 7 d of increased sitting on markers of cardiometabolic risk among free-living individuals. Ten recreationally active participants (>150 min of moderate-intensity physical activity per week; mean ± SD age, 25.2 ± 5.7 yr; mean ± SD body mass index, 24.9 ± 4.3 kg·m(-2)) completed a 7-d baseline period and a 7-d sedentary condition in their free-living environment. At baseline, participants maintained normal activity. After baseline, participants completed a 7-d sedentary condition. Participants were instructed to sit as much as possible, to limit standing and walking, and to refrain from structured exercise and leisure time physical activity. ActivPAL monitor was used to assess sedentary behavior and physical activity. Fasting lipids, glucose, and insulin were measured, and oral glucose tolerance test was performed after baseline and sedentary condition. In comparison to baseline, total sedentary time (mean Δ, 14.9%; 95% CI, 10.2-19.6) and time in prolonged/uninterrupted sedentary bouts significantly increased, whereas the rate of breaks from sedentary time was significantly reduced (mean Δ, 21.4%; 95% CI, 6.9-35.9). For oral glucose tolerance test, 2-h plasma insulin (mean Δ, 38.8 μU·mL(-1); 95% CI, 10.9-66.8) and area under the insulin curve (mean Δ, 3074.1 μU·mL(-1) per 120 min; 95% CI, 526.0-5622.3) were significantly elevated after the sedentary condition. Lipid concentrations did not change. Change in 2-h insulin was negatively associated with change in light-intensity activity (r = -0.62) and positively associated with change in time in sitting bouts longer than 30 min (r = 0.82) and 60 min (r = 0.83). Increased free-living sitting negatively impacts markers of cardiometabolic health, and specific features of sedentary behavior (e.g., time in prolonged sitting bouts) may be particularly important.

Investigation on the innovative impact hydroforming technology

Science.gov (United States)

Lihui, Lang; Shaohua, Wang; Chunlei, Yang

2013-05-01

Hydroforming has a rapid development recently which has good forming quality and less cost. However, it still cannot meet the requirements of forming complex parts with small features just like convex tables, or bars which are widely employed in automotive and aircraft industries. The impact hydroforming technology means the most features are formed by hydroforming and the small features are rapidly reshaped by high intensity impact energy in a very short time after the traditional hydroforming. The impact pressure rises to the peak in 10ms which belongs to dynamic loading. In this paper, impact hydroforming process is proposed. The generation and transmission of impact hydroforming energy and impact shock wave were studied and simulated. The deformation process of the metal disks under the dynamic impact loading condition presented impact hydroforming is an effective technology to form complex parts with small features.

Information Types in Nonmimetic Documents: A Review of Biddle's Wipe-Clean Slate (Understanding Documents).

Science.gov (United States)

Mosenthal, Peter B.; Kirsch, Irwin S.

1991-01-01

Describes how the 16 permanent lists used by a first grade reading teacher (and mother of 6) to manage the household represents the whole range of documents covered in the 3 major types of documents: matrix documents, graphic documents, and locative documents. Suggests class activities to clarify students' understanding of the information in…

Significant differences between the Nordic laws on public access to documents

DEFF Research Database (Denmark)

Jørgensen, Oluf

2017-01-01

Transparency and public access to information work as a check on the exercise of power and the existence of corruption. In Sweden the constitutional right of access to documents is justified precisely by its contribution to democracy, the rule of law and efficiency in the public administration....... The wide access to information in today’s world also makes possible the publication of personal information about individuals’ private life in an unprecedented way. Does this mean that the relative importance of the protection of privacy has to be strengthened at the cost of access to information? What...... will be the impact of the developing information and communication technology on access to information? The right of access to documents has traditionally been discussed on the level of domestic administration but when public administration is internationalised the issue of access to documents makes itself felt also...

Monitored Retrievable Storage System Requirements Document. Revision 1

Energy Technology Data Exchange (ETDEWEB)

1994-03-01

This Monitored Retrievable Storage System Requirements Document (MRS-SRD) describes the functions to be performed and technical requirements for a Monitored Retrievable Storage (MRS) facility subelement and the On-Site Transfer and Storage (OSTS) subelement. The MRS facility subelement provides for temporary storage, at a Civilian Radioactive Waste Management System (CRWMS) operated site, of spent nuclear fuel (SNF) contained in an NRC-approved Multi-Purpose Canister (MPC) storage mode, or other NRC-approved storage modes. The OSTS subelement provides for transfer and storage, at Purchaser sites, of spent nuclear fuel (SNF) contained in MPCs. Both the MRS facility subelement and the OSTS subelement are in support of the CRWMS. The purpose of the MRS-SRD is to define the top-level requirements for the development of the MRS facility and the OSTS. These requirements include design, operation, and decommissioning requirements to the extent they impact on the physical development of the MRS facility and the OSTS. The document also presents an overall description of the MRS facility and the OSTS, their functions (derived by extending the functional analysis documented by the Physical System Requirements (PSR) Store Waste Document), their segments, and the requirements allocated to the segments. In addition, the top-level interface requirements of the MRS facility and the OSTS are included. As such, the MRS-SRD provides the technical baseline for the MRS Safety Analysis Report (SAR) design and the OSTS Safety Analysis Report design.

Technical approach document

International Nuclear Information System (INIS)

1988-04-01

This document describes the general technical approaches and design criteria adopted by the US Department of Energy (DOE) in order to implement Remedial Action Plans (RAPs) and final designs that comply with EPS standards. This document is a revision to the original document. Major revisions were made to the sections in riprap selection and sizing, and ground-water; only minor revisions were made to the remainder of the document. The US Nuclear Regulatory Commission (NRC) has prepared a Standard Review Plan (NRC-SRP) which describes factors to be considered by the NRC in approving the RAP. Sections 3.0, 4.0, 5.0, and 7.0 of this document are arranged under the same headings as those used in the NRC-SRP. This approach is adopted in order to facilitate joint use of the documents. Section 2.0 (not included in the NRC-SRP) discusses design considerations; Section 3.0 describes surface-water hydrology and erosion control; Section 4.0 describes geotechnical aspects of pile design; Section 5.0 discusses the Alternate Site Selection Process; Section 6.0 deals with radiological issues (in particular, the design of the radon barrier); Section 7.0 discusses protection of groundwater resources; and Section 8.0 discusses site design criteria for the RAC

Centrifuge impact cratering experiment 5

Science.gov (United States)

1984-01-01

Transient crates motions, cratering flow fields, crates dynamics, determining impact conditions from total crater welt, centrifuge quarter-space cratering, and impact cratering mechanics research is documented.

Enterprise Document Management

Data.gov (United States)

US Agency for International Development — The function of the operation is to provide e-Signature and document management support for Acquisition and Assisitance (A&A) documents including vouchers in...

How Task Features Impact Evidence from Assessments Embedded in Simulations and Games

Science.gov (United States)

Almond, Russell G.; Kim, Yoon Jeon; Velasquez, Gertrudes; Shute, Valerie J.

2014-01-01

One of the key ideas of evidence-centered assessment design (ECD) is that task features can be deliberately manipulated to change the psychometric properties of items. ECD identifies a number of roles that task-feature variables can play, including determining the focus of evidence, guiding form creation, determining item difficulty and…

Personal information documents for people with dementia: Healthcare staff 's perceptions and experiences.

Science.gov (United States)

Baillie, Lesley; Thomas, Nicola

2018-01-01

Person-centred care is internationally recognised as best practice for the care of people with dementia. Personal information documents for people with dementia are proposed as a way to support person-centred care in healthcare settings. However, there is little research about how they are used in practice. The aim of this study was to analyse healthcare staff 's perceptions and experiences of using personal information documents, mainly Alzheimer's Society's 'This is me', for people with dementia in healthcare settings. The method comprised a secondary thematic analysis of data from a qualitative study, of how a dementia awareness initiative affected care for people with dementia in one healthcare organisation. The data were collected through 12 focus groups (n = 58 participants) and 1 individual interview, conducted with a range of healthcare staff, both clinical and non-clinical. There are four themes presented: understanding the rationale for personal information documents; completing personal information documents; location for personal information documents and transfer between settings; impact of personal information documents in practice. The findings illuminated how healthcare staff use personal information documents in practice in ways that support person-centred care. Practical issues about the use of personal information documents were revealed and these may affect the optimal use of the documents in practice. The study indicated the need to complete personal information documents at an early stage following diagnosis of dementia, and the importance of embedding their use across care settings, to support communication and integrated care.

PORFLOW TESTING AND VERIFICATION DOCUMENT

International Nuclear Information System (INIS)

Aleman, S

2007-01-01

The PORFLOW software package is a comprehensive mathematical model for simulation of multi-phase fluid flow, heat transfer and mass transport in variably saturated porous and fractured media. PORFLOW can simulate transient or steady-state problems in Cartesian or cylindrical geometry. The porous medium may be anisotropic and heterogeneous and may contain discrete fractures or boreholes with the porous matrix. The theoretical models within the code provide a unified treatment of concepts relevant to fluid flow and transport. The main features of PORFLOW that are relevant to Performance Assessment modeling at the Savannah River National Laboratory (SRNL) include variably saturated flow and transport of parent and progeny radionuclides. This document involves testing a relevant sample of problems in PORFLOW and comparing the outcome of the simulations to analytical solutions or other commercial codes. The testing consists of the following four groups. Group 1: Groundwater Flow; Group 2: Contaminant Transport; Group 3: Numerical Dispersion; and Group 4: Keyword Commands

FEATURES, EVENTS, AND PROCESSES: SYSTEM-LEVEL AND CRITICALITY

Energy Technology Data Exchange (ETDEWEB)

D.L. McGregor

2000-12-20

The primary purpose of this Analysis/Model Report (AMR) is to identify and document the screening analyses for the features, events, and processes (FEPs) that do not easily fit into the existing Process Model Report (PMR) structure. These FEPs include the 3 1 FEPs designated as System-Level Primary FEPs and the 22 FEPs designated as Criticality Primary FEPs. A list of these FEPs is provided in Section 1.1. This AMR (AN-WIS-MD-000019) documents the Screening Decision and Regulatory Basis, Screening Argument, and Total System Performance Assessment (TSPA) Disposition for each of the subject Primary FEPs. This AMR provides screening information and decisions for the TSPA-SR report and provides the same information for incorporation into a project-specific FEPs database. This AMR may also assist reviewers during the licensing-review process.

FEATURES, EVENTS, AND PROCESSES: SYSTEM-LEVEL AND CRITICALITY

International Nuclear Information System (INIS)

D.L. McGregor

2000-01-01

The primary purpose of this Analysis/Model Report (AMR) is to identify and document the screening analyses for the features, events, and processes (FEPs) that do not easily fit into the existing Process Model Report (PMR) structure. These FEPs include the 3 1 FEPs designated as System-Level Primary FEPs and the 22 FEPs designated as Criticality Primary FEPs. A list of these FEPs is provided in Section 1.1. This AMR (AN-WIS-MD-000019) documents the Screening Decision and Regulatory Basis, Screening Argument, and Total System Performance Assessment (TSPA) Disposition for each of the subject Primary FEPs. This AMR provides screening information and decisions for the TSPA-SR report and provides the same information for incorporation into a project-specific FEPs database. This AMR may also assist reviewers during the licensing-review process

Feature Selection Based on Mutual Correlation

Czech Academy of Sciences Publication Activity Database

Haindl, Michal; Somol, Petr; Ververidis, D.; Kotropoulos, C.

2006-01-01

Roč. 19, č. 4225 (2006), s. 569-577 ISSN 0302-9743. [Iberoamerican Congress on Pattern Recognition. CIARP 2006 /11./. Cancun, 14.11.2006-17.11.2006] R&D Projects: GA AV ČR 1ET400750407; GA MŠk 1M0572; GA AV ČR IAA2075302 EU Projects: European Commission(XE) 507752 - MUSCLE Institutional research plan: CEZ:AV0Z10750506 Keywords : feature selection Subject RIV: BD - Theory of Information Impact factor: 0.402, year: 2005 http://library.utia.cas.cz/separaty/historie/haindl-feature selection based on mutual correlation.pdf

Avionics Systems Laboratory/Building 16. Historical Documentation

Science.gov (United States)

Slovinac, Patricia; Deming, Joan

2011-01-01

As part of this nation-wide study, in September 2006, historical survey and evaluation of NASA-owned and managed facilities that was conducted by NASA s Lyndon B. Johnson Space Center (JSC) in Houston, Texas. The results of this study are presented in a report entitled, "Survey and Evaluation of NASA-owned Historic Facilities and Properties in the Context of the U.S. Space Shuttle Program, Lyndon B. Johnson Space Center, Houston, Texas," prepared in November 2007 by NASA JSC s contractor, Archaeological Consultants, Inc. As a result of this survey, the Avionics Systems Laboratory (Building 16) was determined eligible for listing in the NRHP, with concurrence by the Texas State Historic Preservation Officer (SHPO). The survey concluded that Building 5 is eligible for the NRHP under Criteria A and C in the context of the U.S. Space Shuttle program (1969-2010). Because it has achieved significance within the past 50 years, Criteria Consideration G applies. At the time of this documentation, Building 16 was still used to support the SSP as an engineering research facility, which is also sometimes used for astronaut training. This documentation package precedes any undertaking as defined by Section 106 of the NHPA, as amended, and implemented in 36 CFR Part 800, as NASA JSC has decided to proactively pursue efforts to mitigate the potential adverse affects of any future modifications to the facility. It includes a historical summary of the Space Shuttle program; the history of JSC in relation to the SSP; a narrative of the history of Building 16 and how it supported the SSP; and a physical description of the structure. In addition, photographs documenting the construction and historical use of Building 16 in support of the SSP, as well as photographs of the facility documenting the existing conditions, special technological features, and engineering details, are included. A contact sheet printed on archival paper, and an electronic copy of the work product on CD, are

Tank Monitoring and Document control System (TMACS) As Built Software Design Document

International Nuclear Information System (INIS)

GLASSCOCK, J.A.

2000-01-01

This document describes the software design for the Tank Monitor and Control System (TMACS). This document captures the existing as-built design of TMACS as of November 1999. It will be used as a reference document to the system maintainers who will be maintaining and modifying the TMACS functions as necessary. The heart of the TMACS system is the ''point-processing'' functionality where a sample value is received from the field sensors and the value is analyzed, logged, or alarmed as required. This Software Design Document focuses on the point-processing functions

Glow experiment documentation of OMS/RCS pod and vertical stabilizer

Science.gov (United States)

1982-01-01

Glow experiment documentation of one of the orbital maneuvering system (OMS) reaction control system (RCS) pods and a portion of the vertical stabilizer shows chemoluminescent effectresulting from atomic oxygen impacting the spacecraft and building to the point that the atomic oxygen atoms combine to form molecules of oxygen. The Image Intensifier on NIKON 35mm camera was used to record the glow.

Glow experiment documentation of OMS/RCS pods and vertical stabilizer

Science.gov (United States)

1982-01-01

Glow experiment documentation of orbital maneuvering system (OMS) reaction control system (RCS) pods and vertical stabilizer shows chemo-luminescent effect resulting from atomic oxygen impacting the spacecraft and building to the point that the atomic oxygen atoms combine to form molecules of oxygen. Image intensifier on NIKON 35mm camera was used to record glow on vertical tail and OMS pods.

Quality of radiomic features in glioblastoma multiforme: Impact of semi-automated tumor segmentation software

Energy Technology Data Exchange (ETDEWEB)

Lee, Myung Eun; Kim, Jong Hyo [Center for Medical-IT Convergence Technology Research, Advanced Institutes of Convergence Technology, Seoul National University, Suwon (Korea, Republic of); Woo, Bo Yeong [Dept. of Transdisciplinary Studies, Graduate School of Convergence Science and Technology, Seoul National University, Suwon (Korea, Republic of); Ko, Micheal D.; Jamshidi, Neema [Dept. of Radiological Sciences, University of California, Los Angeles, Los Angeles (United States)

2017-06-15

The purpose of this study was to evaluate the reliability and quality of radiomic features in glioblastoma multiforme (GBM) derived from tumor volumes obtained with semi-automated tumor segmentation software. MR images of 45 GBM patients (29 males, 16 females) were downloaded from The Cancer Imaging Archive, in which post-contrast T1-weighted imaging and fluid-attenuated inversion recovery MR sequences were used. Two raters independently segmented the tumors using two semi-automated segmentation tools (TumorPrism3D and 3D Slicer). Regions of interest corresponding to contrast-enhancing lesion, necrotic portions, and non-enhancing T2 high signal intensity component were segmented for each tumor. A total of 180 imaging features were extracted, and their quality was evaluated in terms of stability, normalized dynamic range (NDR), and redundancy, using intra-class correlation coefficients, cluster consensus, and Rand Statistic. Our study results showed that most of the radiomic features in GBM were highly stable. Over 90% of 180 features showed good stability (intra-class correlation coefficient [ICC] ≥ 0.8), whereas only 7 features were of poor stability (ICC < 0.5). Most first order statistics and morphometric features showed moderate-to-high NDR (4 > NDR ≥1), while above 35% of the texture features showed poor NDR (< 1). Features were shown to cluster into only 5 groups, indicating that they were highly redundant. The use of semi-automated software tools provided sufficiently reliable tumor segmentation and feature stability; thus helping to overcome the inherent inter-rater and intra-rater variability of user intervention. However, certain aspects of feature quality, including NDR and redundancy, need to be assessed for determination of representative signature features before further development of radiomics.

CNEA's quality system documentation

International Nuclear Information System (INIS)

Mazzini, M.M.; Garonis, O.H.

1998-01-01

Full text: To obtain an effective and coherent documentation system suitable for CNEA's Quality Management Program, we decided to organize the CNEA's quality documentation with : a- Level 1. Quality manual. b- Level 2. Procedures. c-Level 3. Qualities plans. d- Level 4: Instructions. e- Level 5. Records and other documents. The objective of this work is to present a standardization of the documentation of the CNEA's quality system of facilities, laboratories, services, and R and D activities. Considering the diversity of criteria and formats for elaboration the documentation by different departments, and since ultimately each of them generally includes the same quality management policy, we proposed the elaboration of a system in order to improve the documentation, avoiding unnecessary time wasting and costs. This will aloud each sector to focus on their specific documentation. The quality manuals of the atomic centers fulfill the rule 3.6.1 of the Nuclear Regulatory Authority, and the Safety Series 50-C/SG-Q of the International Atomic Energy Agency. They are designed by groups of competent and highly trained people of different departments. The normative procedures are elaborated with the same methodology as the quality manuals. The quality plans which describe the organizational structure of working group and the appropriate documentation, will asses the quality manuals of facilities, laboratories, services, and research and development activities of atomic centers. The responsibilities for approval of the normative documentation are assigned to the management in charge of the administration of economic and human resources in order to fulfill the institutional objectives. Another improvement aimed to eliminate unnecessary invaluable processes is the inclusion of all quality system's normative documentation in the CNEA intranet. (author) [es

Multi-font printed Mongolian document recognition system

Science.gov (United States)

Peng, Liangrui; Liu, Changsong; Ding, Xiaoqing; Wang, Hua; Jin, Jianming

2009-01-01

Mongolian is one of the major ethnic languages in China. Large amount of Mongolian printed documents need to be digitized in digital library and various applications. Traditional Mongolian script has unique writing style and multi-font-type variations, which bring challenges to Mongolian OCR research. As traditional Mongolian script has some characteristics, for example, one character may be part of another character, we define the character set for recognition according to the segmented components, and the components are combined into characters by rule-based post-processing module. For character recognition, a method based on visual directional feature and multi-level classifiers is presented. For character segmentation, a scheme is used to find the segmentation point by analyzing the properties of projection and connected components. As Mongolian has different font-types which are categorized into two major groups, the parameter of segmentation is adjusted for each group. A font-type classification method for the two font-type group is introduced. For recognition of Mongolian text mixed with Chinese and English, language identification and relevant character recognition kernels are integrated. Experiments show that the presented methods are effective. The text recognition rate is 96.9% on the test samples from practical documents with multi-font-types and mixed scripts.

Changing Landscapes in Documentation Efforts: Civil Society Documentation of Serious Human Rights Violations

Directory of Open Access Journals (Sweden)

Brianne McGonigle Leyh

2017-04-01

Full Text Available Wittingly or unwittingly, civil society actors have long been faced with the task of documenting serious human rights violations. Thirty years ago, such efforts were largely organised by grassroots movements, often with little support or funding from international actors. Sharing information and best practices was difficult. Today that situation has significantly changed. The purpose of this article is to explore the changing landscape of civil society documentation of serious human rights violations, and what that means for standardising and professionalising documentation efforts. Using the recent Hisséne Habré case as an example, this article begins by looking at how civil society documentation can successfully influence an accountability process. Next, the article touches upon barriers that continue to impede greater documentation efforts. The article examines the changing landscape of documentation, focusing on technological changes and the rise of citizen journalism and unofficial investigations, using Syria as an example, as well as on the increasing support for documentation efforts both in Syria and worldwide. The changing landscape has resulted in the proliferation of international documentation initiatives aimed at providing local civil society actors guidelines and practical assistance on how to recognise, collect, manage, store and use information about serious human rights violations, as well as on how to minimise the risks associated with the documentation of human rights violations. The recent initiatives undertaken by international civil society, including those by the Public International Law & Policy Group, play an important role in helping to standardise and professionalise documentation work and promote the foundational principles of documentation, namely the ‘do no harm’ principle, and the principles of informed consent and confidentiality. Recognising the drawback that greater professionalisation may bring, it

Features of MCNP6

International Nuclear Information System (INIS)

Goorley, T.; James, M.; Booth, T.; Brown, F.; Bull, J.; Cox, L.J.; Durkee, J.; Elson, J.; Fensin, M.; Forster, R.A.; Hendricks, J.; Hughes, H.G.; Johns, R.; Kiedrowski, B.; Martz, R.; Mashnik, S.; McKinney, G.; Pelowitz, D.; Prael, R.; Sweezy, J.

2016-01-01

Highlights: • MCNP6 is simply and accurately described as the merger of MCNP5 and MCNPX capabilities, but it is much more than the sum of these two computer codes. • MCNP6 is the result of six years of effort by the MCNP5 and MCNPX code development teams. • These groups of people, residing in Los Alamos National Laboratory’s X Computational Physics Division, Monte Carlo Codes Group (XCP-3) and Nuclear Engineering and Nonproliferation Division, Radiation Transport Modeling Team (NEN-5) respectively, have combined their code development efforts to produce the next evolution of MCNP. • While maintenance and major bug fixes will continue for MCNP5 1.60 and MCNPX 2.7.0 for upcoming years, new code development capabilities only will be developed and released in MCNP6. • In fact, the initial release of MCNP6 contains numerous new features not previously found in either code. • These new features are summarized in this document. • Packaged with MCNP6 is also the new production release of the ENDF/B-VII.1 nuclear data files usable by MCNP. • The high quality of the overall merged code, usefulness of these new features, along with the desire in the user community to start using the merged code, have led us to make the first MCNP6 production release: MCNP6 version 1. • High confidence in the MCNP6 code is based on its performance with the verification and validation test suites, comparisons to its predecessor codes, our automated nightly software debugger tests, the underlying high quality nuclear and atomic databases, and significant testing by many beta testers. - Abstract: MCNP6 can be described as the merger of MCNP5 and MCNPX capabilities, but it is much more than the sum of these two computer codes. MCNP6 is the result of six years of effort by the MCNP5 and MCNPX code development teams. These groups of people, residing in Los Alamos National Laboratory’s X Computational Physics Division, Monte Carlo Codes Group (XCP-3) and Nuclear Engineering and

Improving the Quality of Nursing Documentation in Home Health Care Setting

Science.gov (United States)

Obioma, Chidiadi

2017-01-01

Poor nursing documentation of patient care was identified in daily nurse visit notes in a health care setting. This problem affects effective communication of patient status with other clinicians, thereby jeopardizing clinical decision-making. The purpose of this evidence-based project was to determine the impact of a retraining program on the…

Imaginary Documentary: reflecting upon contemporary documental photography Documentário Imaginário: reflexões sobre a fotografia documental contemporânea

Directory of Open Access Journals (Sweden)

Kátia Hallak Lombardi

2008-01-01

Full Text Available This article pursues the idea of an Imaginary Documentary – a possible new inflexion on the practices of contemporary documental photography. The text establishes its theoretical foundations through a forthcoming approach of the discussions about documental photography to the concept of imaginary, by Gilbert Durand, and the notion of Imaginary Museum, by André Malraux. Photographers that are part of documental photography history are the elected objects in which we shall confront the potentialities of the Imaginary Documentary. Este artigo tem como propósito buscar a estruturação da idéia de Documentário Imaginário – uma possível inflexão na prática da fotografia documental contemporânea. O texto assenta suas bases teóricas por meio da aproximação de reflexões sobre a fotografia documental ao conceito de imaginário em Gilbert Durand e à noção de Museu Imaginário de André Malraux. Fotógrafos que fazem parte da história da fotografia documental são os objetos eleitos para aferir as potencialidades do Documentário Imaginário.

Document management in engineering construction

International Nuclear Information System (INIS)

Liao Bing

2008-01-01

Document management is one important part of systematic quality management, which is one of the key factors to ensure the construction quality. In the engineering construction, quality management and document management shall interwork all the time, to ensure the construction quality. Quality management ensures that the document is correctly generated and adopted, and thus the completeness, accuracy and systematicness of the document satisfy the filing requirements. Document management ensures that the document is correctly transferred during the construction, and various testimonies such as files and records are kept for the engineering construction and its quality management. This paper addresses the document management in the engineering construction based on the interwork of the quality management and document management. (author)

BioAnnote: a software platform for annotating biomedical documents with application in medical learning environments.

Science.gov (United States)

López-Fernández, H; Reboiro-Jato, M; Glez-Peña, D; Aparicio, F; Gachet, D; Buenaga, M; Fdez-Riverola, F

2013-07-01

Automatic term annotation from biomedical documents and external information linking are becoming a necessary prerequisite in modern computer-aided medical learning systems. In this context, this paper presents BioAnnote, a flexible and extensible open-source platform for automatically annotating biomedical resources. Apart from other valuable features, the software platform includes (i) a rich client enabling users to annotate multiple documents in a user friendly environment, (ii) an extensible and embeddable annotation meta-server allowing for the annotation of documents with local or remote vocabularies and (iii) a simple client/server protocol which facilitates the use of our meta-server from any other third-party application. In addition, BioAnnote implements a powerful scripting engine able to perform advanced batch annotations. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Rays and radiation. Documentation on natural and artificial radioactivity. Pt. 2

International Nuclear Information System (INIS)

Plettner, B.

1988-01-01

This second part of the documentation deals with the distribution and the effects of radionuclides in the human body, dose equivalent as a standard unit, effects of terrestrial radiation, radionuclides in articles of daily use, reduction of dose in radiology, radiation from nuclear power plant, uncertainty with regard to late radiation effects, effects of low dose. Four graphical representations explain: the environmental impact of reactor accidents, intercomparison of environmental impacts of various methods of electricity generation, engineered safety in KWU-design reactors, nuclear power plant construction activities in Europe. (HSCH) [de

Document Level Assessment of Document Retrieval Systems in a Pairwise System Evaluation

Science.gov (United States)

Rajagopal, Prabha; Ravana, Sri Devi

2017-01-01

Introduction: The use of averaged topic-level scores can result in the loss of valuable data and can cause misinterpretation of the effectiveness of system performance. This study aims to use the scores of each document to evaluate document retrieval systems in a pairwise system evaluation. Method: The chosen evaluation metrics are document-level…

Shoulder dystocia documentation: an evaluation of a documentation training intervention.

Science.gov (United States)

LeRiche, Tammy; Oppenheimer, Lawrence; Caughey, Sharon; Fell, Deshayne; Walker, Mark

2015-03-01

To evaluate the quality and content of nurse and physician shoulder dystocia delivery documentation before and after MORE training in shoulder dystocia management skills and documentation. Approximately 384 charts at the Ottawa Hospital General Campus involving a diagnosis of shoulder dystocia between the years of 2000 and 2006 excluding the training year of 2003 were identified. The charts were evaluated for 14 key components derived from a validated instrument. The delivery notes were then scored based on these components by 2 separate investigators who were blinded to delivery note author, date, and patient identification to further quantify delivery record quality. Approximately 346 charts were reviewed for physician and nurse delivery documentation. The average score for physician notes was 6 (maximum possible score of 14) both before and after the training intervention. The nurses' average score was 5 before and after the training intervention. Negligible improvement was observed in the content and quality of shoulder dystocia documentation before and after nurse and physician training.

Geomorphology of Impact Features on Tethys Using High Resolution Mosaics

Science.gov (United States)

2017-03-01

REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 The public reporting burden tor this c:ollect1on of information 1s estimated to average I...aware that notwithstanding any other prov ision of law, no person shall be subject to any penalty tor failing to comply- With a collection of...NUMBER OF PAGES 2 19a. NAME OF RESPONSIBLE PERSON MICHAEL NAY AK 19b. TELEPHONE NUMBER {Include area code ) 808-891-7727 Reset Standard Form 298

Quality of radiomic features in glioblastoma multiforme: Impact of semi-automated tumor segmentation software

International Nuclear Information System (INIS)

Lee, Myung Eun; Kim, Jong Hyo; Woo, Bo Yeong; Ko, Micheal D.; Jamshidi, Neema

2017-01-01

The purpose of this study was to evaluate the reliability and quality of radiomic features in glioblastoma multiforme (GBM) derived from tumor volumes obtained with semi-automated tumor segmentation software. MR images of 45 GBM patients (29 males, 16 females) were downloaded from The Cancer Imaging Archive, in which post-contrast T1-weighted imaging and fluid-attenuated inversion recovery MR sequences were used. Two raters independently segmented the tumors using two semi-automated segmentation tools (TumorPrism3D and 3D Slicer). Regions of interest corresponding to contrast-enhancing lesion, necrotic portions, and non-enhancing T2 high signal intensity component were segmented for each tumor. A total of 180 imaging features were extracted, and their quality was evaluated in terms of stability, normalized dynamic range (NDR), and redundancy, using intra-class correlation coefficients, cluster consensus, and Rand Statistic. Our study results showed that most of the radiomic features in GBM were highly stable. Over 90% of 180 features showed good stability (intra-class correlation coefficient [ICC] ≥ 0.8), whereas only 7 features were of poor stability (ICC NDR ≥1), while above 35% of the texture features showed poor NDR (< 1). Features were shown to cluster into only 5 groups, indicating that they were highly redundant. The use of semi-automated software tools provided sufficiently reliable tumor segmentation and feature stability; thus helping to overcome the inherent inter-rater and intra-rater variability of user intervention. However, certain aspects of feature quality, including NDR and redundancy, need to be assessed for determination of representative signature features before further development of radiomics

Quality of Radiomic Features in Glioblastoma Multiforme: Impact of Semi-Automated Tumor Segmentation Software.

Science.gov (United States)

Lee, Myungeun; Woo, Boyeong; Kuo, Michael D; Jamshidi, Neema; Kim, Jong Hyo

2017-01-01

The purpose of this study was to evaluate the reliability and quality of radiomic features in glioblastoma multiforme (GBM) derived from tumor volumes obtained with semi-automated tumor segmentation software. MR images of 45 GBM patients (29 males, 16 females) were downloaded from The Cancer Imaging Archive, in which post-contrast T1-weighted imaging and fluid-attenuated inversion recovery MR sequences were used. Two raters independently segmented the tumors using two semi-automated segmentation tools (TumorPrism3D and 3D Slicer). Regions of interest corresponding to contrast-enhancing lesion, necrotic portions, and non-enhancing T2 high signal intensity component were segmented for each tumor. A total of 180 imaging features were extracted, and their quality was evaluated in terms of stability, normalized dynamic range (NDR), and redundancy, using intra-class correlation coefficients, cluster consensus, and Rand Statistic. Our study results showed that most of the radiomic features in GBM were highly stable. Over 90% of 180 features showed good stability (intra-class correlation coefficient [ICC] ≥ 0.8), whereas only 7 features were of poor stability (ICC NDR ≥1), while above 35% of the texture features showed poor NDR (software tools provided sufficiently reliable tumor segmentation and feature stability; thus helping to overcome the inherent inter-rater and intra-rater variability of user intervention. However, certain aspects of feature quality, including NDR and redundancy, need to be assessed for determination of representative signature features before further development of radiomics.

Consumer Vehicle Choice Model Documentation

Energy Technology Data Exchange (ETDEWEB)

Liu, Changzheng [ORNL; Greene, David L [ORNL

2012-08-01

In response to the Fuel Economy and Greenhouse Gas (GHG) emissions standards, automobile manufacturers will need to adopt new technologies to improve the fuel economy of their vehicles and to reduce the overall GHG emissions of their fleets. The U.S. Environmental Protection Agency (EPA) has developed the Optimization Model for reducing GHGs from Automobiles (OMEGA) to estimate the costs and benefits of meeting GHG emission standards through different technology packages. However, the model does not simulate the impact that increased technology costs will have on vehicle sales or on consumer surplus. As the model documentation states, “While OMEGA incorporates functions which generally minimize the cost of meeting a specified carbon dioxide (CO2) target, it is not an economic simulation model which adjusts vehicle sales in response to the cost of the technology added to each vehicle.” Changes in the mix of vehicles sold, caused by the costs and benefits of added fuel economy technologies, could make it easier or more difficult for manufacturers to meet fuel economy and emissions standards, and impacts on consumer surplus could raise the costs or augment the benefits of the standards. Because the OMEGA model does not presently estimate such impacts, the EPA is investigating the feasibility of developing an adjunct to the OMEGA model to make such estimates. This project is an effort to develop and test a candidate model. The project statement of work spells out the key functional requirements for the new model.

Tank Monitoring and Document control System (TMACS) As Built Software Design Document

Energy Technology Data Exchange (ETDEWEB)

GLASSCOCK, J.A.

2000-01-27

This document describes the software design for the Tank Monitor and Control System (TMACS). This document captures the existing as-built design of TMACS as of November 1999. It will be used as a reference document to the system maintainers who will be maintaining and modifying the TMACS functions as necessary. The heart of the TMACS system is the ''point-processing'' functionality where a sample value is received from the field sensors and the value is analyzed, logged, or alarmed as required. This Software Design Document focuses on the point-processing functions.

Toward Documentation of Program Evolution

DEFF Research Database (Denmark)

Vestdam, Thomas; Nørmark, Kurt

2005-01-01

The documentation of a program often falls behind the evolution of the program source files. When this happens it may be attractive to shift the documentation mode from updating the documentation to documenting the evolution of the program. This paper describes tools that support the documentatio....... It is concluded that our approach can help revitalize older documentation, and that discovery of the fine grained program evolution steps help the programmer in documenting the evolution of the program....

Web document engineering

International Nuclear Information System (INIS)

White, B.

1996-05-01

This tutorial provides an overview of several document engineering techniques which are applicable to the authoring of World Wide Web documents. It illustrates how pre-WWW hypertext research is applicable to the development of WWW information resources

A Multiple-Label Guided Clustering Algorithm for Historical Document Dating and Localization.

Science.gov (United States)

He, Sheng; Samara, Petros; Burgers, Jan; Schomaker, Lambert

2016-11-01

It is of essential importance for historians to know the date and place of origin of the documents they study. It would be a huge advancement for historical scholars if it would be possible to automatically estimate the geographical and temporal provenance of a handwritten document by inferring them from the handwriting style of such a document. We propose a multiple-label guided clustering algorithm to discover the correlations between the concrete low-level visual elements in historical documents and abstract labels, such as date and location. First, a novel descriptor, called histogram of orientations of handwritten strokes, is proposed to extract and describe the visual elements, which is built on a scale-invariant polar-feature space. In addition, the multi-label self-organizing map (MLSOM) is proposed to discover the correlations between the low-level visual elements and their labels in a single framework. Our proposed MLSOM can be used to predict the labels directly. Moreover, the MLSOM can also be considered as a pre-structured clustering method to build a codebook, which contains more discriminative information on date and geography. The experimental results on the medieval paleographic scale data set demonstrate that our method achieves state-of-the-art results.

Self-induced stretch syncope of adolescence: a video-EEG documentation.

Science.gov (United States)

Mazzuca, Michel; Thomas, Pierre

2007-12-01

We present the first video-EEG documentation, with ECG and EMG features, of stretch syncope of adolescence in a young, healthy 16-year-old boy. Stretch syncope of adolescence is a rarely reported, benign cause of fainting in young patients, which can be confused with epileptic seizures. In our patient, syncopes were self-induced to avoid school. Dynamic transcranial Doppler showed evidence of blood flow decrease in both posterior cerebral arteries mimicking effects of a Valsalva manoeuvre. Dynamic angiogram of the vertebral arteries was normal. Hypotheses concerning the physiopathology are discussed. [Published with video sequences].

USI: a fast and accurate approach for conceptual document annotation.

Science.gov (United States)

Fiorini, Nicolas; Ranwez, Sylvie; Montmain, Jacky; Ranwez, Vincent

2015-03-14

Semantic approaches such as concept-based information retrieval rely on a corpus in which resources are indexed by concepts belonging to a domain ontology. In order to keep such applications up-to-date, new entities need to be frequently annotated to enrich the corpus. However, this task is time-consuming and requires a high-level of expertise in both the domain and the related ontology. Different strategies have thus been proposed to ease this indexing process, each one taking advantage from the features of the document. In this paper we present USI (User-oriented Semantic Indexer), a fast and intuitive method for indexing tasks. We introduce a solution to suggest a conceptual annotation for new entities based on related already indexed documents. Our results, compared to those obtained by previous authors using the MeSH thesaurus and a dataset of biomedical papers, show that the method surpasses text-specific methods in terms of both quality and speed. Evaluations are done via usual metrics and semantic similarity. By only relying on neighbor documents, the User-oriented Semantic Indexer does not need a representative learning set. Yet, it provides better results than the other approaches by giving a consistent annotation scored with a global criterion - instead of one score per concept.

Focal Amyloidosis of the Orbit Presenting as a Mass: MRI and CT Features

International Nuclear Information System (INIS)

Yerli, Hasan; Aydin, Erdinc; Avci, Suat; Haberal, Nihan; Oto, Sibel

2011-01-01

Focal orbital amyloidosis is a rare entity and little is known about its magnetic resonance imaging (MRI) features. In this case report, imaging features of a case of focal orbital amyloidosis presenting as a mass have been documented together with its histopathological findings. On MRI, a well-defined mass was seen as isointense with rectus muscle on T1-weighted images and heterogeneously hypointense on T2-weighted images. Punctuate calcifications were observed on the computerized tomography (CT) examination

Embedding Metadata and Other Semantics in Word Processing Documents

Directory of Open Access Journals (Sweden)

Peter Sefton

2009-10-01

Full Text Available This paper describes a technique for embedding document metadata, and potentially other semantic references inline in word processing documents, which the authors have implemented with the help of a software development team. Several assumptions underly the approach; It must be available across computing platforms and work with both Microsoft Word (because of its user base and OpenOffice.org (because of its free availability. Further the application needs to be acceptable to and usable by users, so the initial implementation covers only small number of features, which will only be extended after user-testing. Within these constraints the system provides a mechanism for encoding not only simple metadata, but for inferring hierarchical relationships between metadata elements from a ‘flat’ word processing file.The paper includes links to open source code implementing the techniques as part of a broader suite of tools for academic writing. This addresses tools and software, semantic web and data curation, integrating curation into research workflows and will provide a platform for integrating work on ontologies, vocabularies and folksonomies into word processing tools.

Features of Personal Pronouns in Cuneus Prophetarum of Pjetër Bogdani

OpenAIRE

Shpëtim Elezi

2017-01-01

This paper describes in full the systematic features of the personal pronounced in one of the old Albanian texts of the XVII century, such as the Cuneus Prophetarum of Pjetër Bogdani. Specifically, through the descriptive method, the grammatical features of the personal pronouns of the first two persons, singular and plural, are described: unë, ti, ne, ju, (I, you, we, you) which are also real pronouns in the period of documented Albanian. While the complete paradigm of their declination in t...

Documents preparation and review

International Nuclear Information System (INIS)

1999-01-01

Ignalina Safety Analysis Group takes active role in assisting regulatory body VATESI to prepare various regulatory documents and reviewing safety reports and other documentation presented by Ignalina NPP in the process of licensing of unit 1. The list of main documents prepared and reviewed is presented

Final Environmental Impact Statement and Environmental Impact Report for continued operation of Lawrence Livermore National Laboratory and Sandia National Laboratories, Livermore

International Nuclear Information System (INIS)

1992-08-01

The US Department of Energy (DOE) and the Regents of the University of California (UC) propose the continued operation, including near-term proposed projects, of the Lawrence Livermore National Laboratory (LLNL). In addition, DOE proposes the continued operation, including near-term proposed projects, of Sandia National Laboratories, Livermore (SNL, Livermore). Continued operation plus proposed projects at the two Laboratories is needed so that the research and development missions established by Congress and the President can continue to be supported. As provided and encouraged by the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA), DOE and UC have prepared this document as a joint Environmental Impact Statement (EIS) and Environmental Impact Report (EIR) to analyze the impacts of the proposed action. In addition, this document discusses a no action alternative for continuing operations at FY 1992 funding levels without further growth, a modification of operations alternative focused on specific adverse environmental impacts of operations or facilities, and a shutdown and decommissioning alternative. This document also examines the alternative of UC discontinuing its management of LLNL after the current contract expires on September 30, 1992. The environmental documentation process provides information to the public, government agencies, and decision makers about the environmental impacts of implementing the proposed and alternative actions. In addition, this environmental documentation identifies alternatives and possible ways to reduce or prevent environmental impacts. A list of the issues raised through the EIS/EIR scoping process is presented

FILM/TALK: Photography A Visual Language: The Landscape Document Part 1

OpenAIRE

Murray, Matthew; United Nations of Photography; Film courtesy of Reece Pickering and Tchad Findlay

2016-01-01

This short film is part of a conversation featuring photographers Marc Wilson, Brian David Stevens and Matthew Murray hosted by Ian McGuffie. In this film they passionately discuss the highly personal inspirations for their work, their process of working, the importance of history in personal experience and the role of landscape photography as a social document. \\ud \\ud This talk was part of a day of talks titled Photography A Visual language: A Day of Conversation held by us in collaboration...

INFORMATION DOCUMENTS – PRIMORDIAL INSTRUMENTS IN TOURIST COMMUNICATION

Directory of Open Access Journals (Sweden)

Denisa PARPANDEL

2010-01-01

Full Text Available Tourist information proved to have an important influence on the choice of holiday destinations. An important category of promotional means used tourism as a source of information is a tourist information documents in which graphical advertising has a great importance. In a harmonious combination between an informative text and a picture suggestive of its different forms (flyers, brochures, catalogs, guides and tourist maps, posters and billboards, advertisements in the press visualize products of interest. This article highlights the importance of tourism information documents on the selection of destination, the requirements and recommendations for their design and the need arrangement advertisement to increase its impact on potential tourists. Tour operators in cooperation with advertising agency, choosing one means of communication and advertising medium itself, according to market research conducted, the production capacity or area of interest to prepare an advertising campaign, the level of tariffs and the type of benefits offered, the type of tourism product offered and the target market segment targeted.

Documentation of Cultural Heritage Objects

Directory of Open Access Journals (Sweden)

Jon Grobovšek

2013-09-01

Full Text Available EXTENDED ABSTRACT:The first and important phase of documentation of cultural heritage objects is to understand which objects need to be documented. The entire documentation process is determined by the characteristics and scope of the cultural heritage object. The next question to be considered is the expected outcome of the documentation process and the purpose for which it will be used. These two essential guidelines determine each stage of the documentation workflow: the choice of the most appropriate data capturing technology and data processing method, how detailed should the documentation be, what problems may occur, what the expected outcome is, what it will be used for, and the plan for storing data and results. Cultural heritage objects require diverse data capturing and data processing methods. It is important that even the first stages of raw data capturing are oriented towards the applicability of results. The selection of the appropriate working method can facilitate the data processing and the preparation of final documentation. Documentation of paintings requires different data capturing method than documentation of buildings or building areas. The purpose of documentation can also be the preservation of the contemporary cultural heritage to posterity or the basis for future projects and activities on threatened objects. Documentation procedures should be adapted to our needs and capabilities. Captured and unprocessed data are lost unless accompanied by additional analyses and interpretations. Information on tools, procedures and outcomes must be included into documentation. A thorough analysis of unprocessed but accessible documentation, if adequately stored and accompanied by additional information, enables us to gather useful data. In this way it is possible to upgrade the existing documentation and to avoid data duplication or unintentional misleading of users. The documentation should be archived safely and in a way to meet

Using UML and Petri nets for visualization of business document flow

Directory of Open Access Journals (Sweden)

Ivana Rábová

2012-01-01

Full Text Available The article deals with two principles of business workflow modeling, Petri nets and UML notation, that are the acceptable approaches to business modeling and can be used also for business documents workflow. The special type of Petri nets, WF-nets and UML activity diagrams are used in this article and both modeling ways are presented on the concrete business workflow and then there are presented and specified their advantage and disadvantage for business documents flows. At beginning it is explained the word workflow in context business documents, its features, principles and using in business environment. After that it is clarified that the UML is OMG’s most-used specification, and the way the world models not only application structure, behavior, and architecture, but also business process, workflows and data structure. Activity diagram UML is good way to show how different workflows in the business are managed, how they start, go and stop. Diagrams also show many different decision paths that can be taken from start to finish. State charts can be used as a detail the transitions or changes of states when documents can go through in the business. They show how a documents moves from one state to another and the rules that govern that change. Petri-nets offer a graphical notation for stepwise processes that include choice, iteration, and concurrent execution. Unlike UML Petri nets have an exact mathematical definition of their execution semantics, with a well-developed mathematical theory for process analysis. In the article there are modeled a special type of Petri nets, the WF-nets. The practical part of article incorporates two models of concrete business documents workflows presented in these notations, their comparison and recommendation for using these diagrams in business process management.

Corporate governance and audit features: SMEs evidence

OpenAIRE

Al-Najjar, Basil

2018-01-01

Purpose\\ud The purpose of this paper is to investigate the effect of corporate governance factors on audit features, namely, audit fees and the selection of Big 4 audit firms within the UK SMEs context.\\ud \\ud Design/methodology/approach\\ud The author uses different regression models to investigate the impact of corporate governance characteristics on audit features, and employs cross-sectional time series models as well as two-stage least squares technique. In addition, the author has used l...

Survey of methods of facial palsy documentation in use by members of the Sir Charles Bell Society

NARCIS (Netherlands)

Fattah, A.Y.; Gavilan, J.; Hadlock, T.A.; Marcus, J.R.; Marres, H.A.; Nduka, C.; Slattery, W.H.; Snyder-Warwick, A.K.

2014-01-01

OBJECTIVES/HYPOTHESIS: Facial palsy manifests a broad array of deficits affecting function, form, and psychological well-being. Assessment scales were introduced to standardize and document the features of facial palsy and to facilitate the exchange of information and comparison of outcomes. The aim

The Effect of Structured Decision-Making Techniques and Gender on Student Reaction and Quality of Written Documents.

Science.gov (United States)

Neal, Joan; Echternacht, Lonnie

1995-01-01

Experimental groups used four decision-making techniques--reverse brainstorming (RS), dialectical inquiry (DI), devil's advocacy (DA), and consensus--in evaluating writing assignments. Control group produced a better quality document. Student reaction to negative features of RS, DI, and DA were not significant. (SK)

Documentation: Records and Reports.

Science.gov (United States)

Akers, Michael J

2017-01-01

This article deals with documentation to include the beginning of documentation, the requirements of Good Manufacturing Practice reports and records, and the steps that can be taken to minimize Good Manufacturing Practice documentation problems. It is important to remember that documentation for 503a compounding involves the Formulation Record, Compounding Record, Standard Operating Procedures, Safety Data Sheets, etc. For 503b outsourcing facilities, compliance with Current Good Manufacturing Practices is required, so this article is applicable to them. For 503a pharmacies, one can see the development and modification of Good Manufacturing Practice and even observe changes as they are occurring in 503a documentation requirements and anticipate that changes will probably continue to occur. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

The Computable Catchment: An executable document for model-data software sharing, reproducibility and interactive visualization

Science.gov (United States)

Gil, Y.; Duffy, C.

2015-12-01

This paper proposes the concept of a "Computable Catchment" which is used to develop a collaborative platform for watershed modeling and data analysis. The object of the research is a sharable, executable document similar to a pdf, but one that includes documentation of the underlying theoretical concepts, interactive computational/numerical resources, linkage to essential data repositories and the ability for interactive model-data visualization and analysis. The executable document for each catchment is stored in the cloud with automatic provisioning and a unique identifier allowing collaborative model and data enhancements for historical hydroclimatic reconstruction and/or future landuse or climate change scenarios to be easily reconstructed or extended. The Computable Catchment adopts metadata standards for naming all variables in the model and the data. The a-priori or initial data is derived from national data sources for soils, hydrogeology, climate, and land cover available from the www.hydroterre.psu.edu data service (Leonard and Duffy, 2015). The executable document is based on Wolfram CDF or Computable Document Format with an interactive open-source reader accessible by any modern computing platform. The CDF file and contents can be uploaded to a website or simply shared as a normal document maintaining all interactive features of the model and data. The Computable Catchment concept represents one application for Geoscience Papers of the Future representing an extensible document that combines theory, models, data and analysis that are digitally shared, documented and reused among research collaborators, students, educators and decision makers.

A Hierarchical Feature Extraction Model for Multi-Label Mechanical Patent Classification

Directory of Open Access Journals (Sweden)

Jie Hu

2018-01-01

Full Text Available Various studies have focused on feature extraction methods for automatic patent classification in recent years. However, most of these approaches are based on the knowledge from experts in related domains. Here we propose a hierarchical feature extraction model (HFEM for multi-label mechanical patent classification, which is able to capture both local features of phrases as well as global and temporal semantics. First, a n-gram feature extractor based on convolutional neural networks (CNNs is designed to extract salient local lexical-level features. Next, a long dependency feature extraction model based on the bidirectional long–short-term memory (BiLSTM neural network model is proposed to capture sequential correlations from higher-level sequence representations. Then the HFEM algorithm and its hierarchical feature extraction architecture are detailed. We establish the training, validation and test datasets, containing 72,532, 18,133, and 2679 mechanical patent documents, respectively, and then check the performance of HFEMs. Finally, we compared the results of the proposed HFEM and three other single neural network models, namely CNN, long–short-term memory (LSTM, and BiLSTM. The experimental results indicate that our proposed HFEM outperforms the other compared models in both precision and recall.

Instructions for submittal and control of FFTF design documents and design related documentation

International Nuclear Information System (INIS)

Grush, R.E.

1976-10-01

This document provides the system and requirements for management of FFTF technical data prepared by Westinghouse Hanford (HEDL), and design contractors, the construction contractor and lower tier equipment suppliers. Included in this document are provisions for the review, approval, release, change control, and accounting of FFTF design disclosure and base documentation. Also included are provisions for submittal of other design related documents for review and approval consistent with applicable requirements of RDT-Standard F 2-2, ''Quality Assurance Program Requirements.''

The cognitive impact of interactive design features for learning complex materials in medical education.

Science.gov (United States)

Song, Hyuksoon S; Pusic, Martin; Nick, Michael W; Sarpel, Umut; Plass, Jan L; Kalet, Adina L

2014-02-01

To identify the most effective way for medical students to interact with a browser-based learning module on the symptoms and neurological underpinnings of stroke syndromes, this study manipulated the way in which subjects interacted with a graphical model of the brain and examined the impact of functional changes on learning outcomes. It was hypothesized that behavioral interactions that were behaviorally more engaging and which required deeper consideration of the model would result in heightened cognitive interaction and better learning than those whose manipulation required less deliberate behavioral and cognitive processing. One hundred forty four students were randomly assigned to four conditions whose model controls incorporated features that required different levels of behavioral and cognitive interaction: Movie (low behavioral/low cognitive, n = 40), Slider (high behavioral/low cognitive, n = 36), Click (low behavioral/high cognitive, n = 30), and Drag (high behavioral/high cognitive, n = 38). Analysis of Covariates (ANCOVA) showed that students who received the treatments associated with lower cognitive interactivity (Movie and Slider) performed better on a transfer task than those receiving the module associated with high cognitive interactivity (Click and Drag, partial eta squared = .03). In addition, the students in the high cognitive interactivity conditions spent significantly more time on the stroke locator activity than other conditions (partial eta squared = .36). The results suggest that interaction with controls that were tightly coupled with the model and whose manipulation required deliberate consideration of the model's features may have overtaxed subjects' cognitive resources. Cognitive effort that facilitated manipulation of content, though directed at the model, may have resulted in extraneous cognitive load, impeding subjects in recognizing the deeper, global relationships in the materials. Instructional designers must, therefore, keep in

Understanding Legacy Features with Featureous

DEFF Research Database (Denmark)

Olszak, Andrzej; Jørgensen, Bo Nørregaard

2011-01-01

Java programs called Featureous that addresses this issue. Featureous allows a programmer to easily establish feature-code traceability links and to analyze their characteristics using a number of visualizations. Featureous is an extension to the NetBeans IDE, and can itself be extended by third...

Technical support document: Energy efficiency standards for consumer products: Refrigerators, refrigerator-freezers, and freezers including draft environmental assessment, regulatory impact analysis

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-07-01

The Energy Policy and Conservation Act (P.L. 94-163), as amended by the National Appliance Energy Conservation Act of 1987 (P.L. 100-12) and by the National Appliance Energy Conservation Amendments of 1988 (P.L. 100-357), and by the Energy Policy Act of 1992 (P.L. 102-486), provides energy conservation standards for 12 of the 13 types of consumer products` covered by the Act, and authorizes the Secretary of Energy to prescribe amended or new energy standards for each type (or class) of covered product. The assessment of the proposed standards for refrigerators, refrigerator-freezers, and freezers presented in this document is designed to evaluate their economic impacts according to the criteria in the Act. It includes an engineering analysis of the cost and performance of design options to improve the efficiency of the products; forecasts of the number and average efficiency of products sold, the amount of energy the products will consume, and their prices and operating expenses; a determination of change in investment, revenues, and costs to manufacturers of the products; a calculation of the costs and benefits to consumers, electric utilities, and the nation as a whole; and an assessment of the environmental impacts of the proposed standards.

Document page structure learning for fixed-layout e-books using conditional random fields

Science.gov (United States)

Tao, Xin; Tang, Zhi; Xu, Canhui

2013-12-01

In this paper, a model is proposed to learn logical structure of fixed-layout document pages by combining support vector machine (SVM) and conditional random fields (CRF). Features related to each logical label and their dependencies are extracted from various original Portable Document Format (PDF) attributes. Both local evidence and contextual dependencies are integrated in the proposed model so as to achieve better logical labeling performance. With the merits of SVM as local discriminative classifier and CRF modeling contextual correlations of adjacent fragments, it is capable of resolving the ambiguities of semantic labels. The experimental results show that CRF based models with both tree and chain graph structures outperform the SVM model with an increase of macro-averaged F1 by about 10%.

Extended Subject Access to Hypertext Online Documentation. Part III: The Document-Boundaries Problem.

Science.gov (United States)

Girill, T. R.

1991-01-01

This article continues the description of DFT (Document, Find, Theseus), an online documentation system that provides computer-managed on-demand printing of software manuals as well as the interactive retrieval of reference passages. Document boundaries in the hypertext database are discussed, search vocabulary complexities are described, and text…

Synthesis document on the long life behavior of packages: reference operational document ''CSD-C'' 2004

International Nuclear Information System (INIS)

Helie, M.

2004-12-01

This document is realized in the framework of the law of 1991 on the radioactive wastes management. The 2004 synthesis document on long time behavior of standard packages of compacted wastes is constituted by two documents, the reference document and the operational document. This paper presents the operational model describing the packages alteration by the water and the associated radionuclide release. (A.L.B.)

CMS DOCUMENTATION

CERN Multimedia

CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ General - CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. LHC Symposiums Management - CB - MB - FB - FMC Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2006 Annual reviews are posted.   CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat a...

CMS DOCUMENTATION

CERN Multimedia

CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ General - CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. LHC Symposiums Management - CB - MB - FB - FMC Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2006 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the natu...

CMS DOCUMENTATION

CERN Multimedia

CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ General - CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. LHC Symposiums Management - CB - MB - FB - FMC Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2006 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the natur...

CMS DOCUMENTATION

CERN Multimedia

CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ Management- CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. Management - CB - MB - FB Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2007 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the nature of em¬pl...

CMS DOCUMENTATION

CERN Multimedia

CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ Management- CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. Management - CB - MB - FB Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2007 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the nature of employment and ...

CMS DOCUMENTATION

CERN Multimedia

CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ General - CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. LHC Symposiums Management - CB - MB - FB - FMC Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2006 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the na...

76 FR 66311 - Draft Documents To Support Submission of an Electronic Common Technical Document; Availability

Science.gov (United States)

2011-10-26

...] Draft Documents To Support Submission of an Electronic Common Technical Document; Availability AGENCY... making regulatory submissions in electronic format using the electronic Common Technical Document (eCTD....S. regional document type definition, version 3.0) and ``Comprehensive Table of Contents Headings...

Embedding the shapes of regions of interest into a Clinical Document Architecture document.

Science.gov (United States)

Minh, Nguyen Hai; Yi, Byoung-Kee; Kim, Il Kon; Song, Joon Hyun; Binh, Pham Viet

2015-03-01

Sharing a medical image visually annotated by a region of interest with a remotely located specialist for consultation is a good practice. It may, however, require a special-purpose (and most likely expensive) system to send and view them, which is an unfeasible solution in developing countries such as Vietnam. In this study, we design and implement interoperable methods based on the HL7 Clinical Document Architecture and the eXtensible Markup Language Stylesheet Language for Transformation standards to seamlessly exchange and visually present the shapes of regions of interest using web browsers. We also propose a new integration architecture for a Clinical Document Architecture generator that enables embedding of regions of interest and simultaneous auto-generation of corresponding style sheets. Using the Clinical Document Architecture document and style sheet, a sender can transmit clinical documents and medical images together with coordinate values of regions of interest to recipients. Recipients can easily view the documents and display embedded regions of interest by rendering them in their web browser of choice. © The Author(s) 2014.

Human Document Project

NARCIS (Netherlands)

de Vries, Jeroen; Abelmann, Leon; Manz, A; Elwenspoek, Michael Curt

2012-01-01

“The Human Document Project‿ is a project which tries to answer all of the questions related to preserving information about the human race for tens of generations of humans to come or maybe even for a future intelligence which can emerge in the coming thousands of years. This document mainly

Linking structural features of protein complexes and biological function.

Science.gov (United States)

Sowmya, Gopichandran; Breen, Edmond J; Ranganathan, Shoba

2015-09-01

Protein-protein interaction (PPI) establishes the central basis for complex cellular networks in a biological cell. Association of proteins with other proteins occurs at varying affinities, yet with a high degree of specificity. PPIs lead to diverse functionality such as catalysis, regulation, signaling, immunity, and inhibition, playing a crucial role in functional genomics. The molecular principle of such interactions is often elusive in nature. Therefore, a comprehensive analysis of known protein complexes from the Protein Data Bank (PDB) is essential for the characterization of structural interface features to determine structure-function relationship. Thus, we analyzed a nonredundant dataset of 278 heterodimer protein complexes, categorized into major functional classes, for distinguishing features. Interestingly, our analysis has identified five key features (interface area, interface polar residue abundance, hydrogen bonds, solvation free energy gain from interface formation, and binding energy) that are discriminatory among the functional classes using Kruskal-Wallis rank sum test. Significant correlations between these PPI interface features amongst functional categories are also documented. Salt bridges correlate with interface area in regulator-inhibitors (r = 0.75). These representative features have implications for the prediction of potential function of novel protein complexes. The results provide molecular insights for better understanding of PPIs and their relation to biological functions. © 2015 The Protein Society.

Application of process improvement principles to increase the frequency of complete airway management documentation.

Science.gov (United States)

McCarty, L Kelsey; Saddawi-Konefka, Daniel; Gargan, Lauren M; Driscoll, William D; Walsh, John L; Peterfreund, Robert A

2014-12-01

Process improvement in healthcare delivery settings can be difficult, even when there is consensus among clinicians about a clinical practice or desired outcome. Airway management is a medical intervention fundamental to the delivery of anesthesia care. Like other medical interventions, a detailed description of the management methods should be documented. Despite this expectation, airway documentation is often insufficient. The authors hypothesized that formal adoption of process improvement methods could be used to increase the rate of "complete" airway management documentation. The authors defined a set of criteria as a local practice standard of "complete" airway management documentation. The authors then employed selected process improvement methodologies over 13 months in three iterative and escalating phases to increase the percentage of records with complete documentation. The criteria were applied retrospectively to determine the baseline frequency of complete records, and prospectively to measure the impact of process improvements efforts over the three phases of implementation. Immediately before the initial intervention, a retrospective review of 23,011 general anesthesia cases over 6 months showed that 13.2% of patient records included complete documentation. At the conclusion of the 13-month improvement effort, documentation improved to a completion rate of 91.6% (Pprocess improvement methodologies can improve airway documentation and may be similarly effective in improving other areas of anesthesia clinical practice.

LCS Content Document Application

Science.gov (United States)

Hochstadt, Jake

2011-01-01

My project at KSC during my spring 2011 internship was to develop a Ruby on Rails application to manage Content Documents..A Content Document is a collection of documents and information that describes what software is installed on a Launch Control System Computer. It's important for us to make sure the tools we use everyday are secure, up-to-date, and properly licensed. Previously, keeping track of the information was done by Excel and Word files between different personnel. The goal of the new application is to be able to manage and access the Content Documents through a single database backed web application. Our LCS team will benefit greatly with this app. Admin's will be able to login securely to keep track and update the software installed on each computer in a timely manner. We also included exportability such as attaching additional documents that can be downloaded from the web application. The finished application will ease the process of managing Content Documents while streamlining the procedure. Ruby on Rails is a very powerful programming language and I am grateful to have the opportunity to build this application.

A fully updated version of the European utility requirement (EUR) documents is to be available

International Nuclear Information System (INIS)

Chatry, J.P.; Berbey, P.

2001-01-01

The major European electricity producers have worked on a common requirement document for future LWR plants since 1992 to get specifications acceptable together by the owners, the public and the authorities. Thus the designers can develop standard LWR designs that could be acceptable everywhere in Europe and the utilities can open their consultations to vendors on common bases. Public and authority's acceptance should be improved as well. Significant savings are expected in development and construction costs. Since the release of the last versions of the EUR texts in 1996, a lot of work has been carried out: reviews by the regulators and other external organisations, comparisons, assessment of compliance of designs vs. EUR and clarification works on the controversial topics that deserved changes or clarification. At the beginning of 1999 enough material was available to start a complete revision of the EUR document. Volumes 1 and 2 of the EUR document list generic nuclear island requirements. The main NPP vendors are developing advanced LWR designs for the European market, with reference to the EUR document. Volume 3 deals with the application of EUR to those designs. The EUR utilities -with contributions of the vendors- are writing specific parts of the EUR document that address some of these designs. Each part includes a plant description and an assessment of its level of compliance with EUR. The first three parts deal with EPR (1500 MW PWR developed by NPI, Framatome and Siemens), EPP (1000 MW PWR with passive safety features developed by Westinghouse and Ansaldo) and BWR 90 (1300 MW BWR developed by ABB Atom). Two other subsets are: one for ABWR (1300 MW BWR developed by GE), the other one for SWR 1000 (1000 MW BWR with passive safety features developed by Siemens). This large and diverse set of designs actually gives the EUR document a very strong base. Revision B of Volume 4 incorporates responses to the comments collected on revision A. Considering all that

Foreign patent documentation and information research

International Nuclear Information System (INIS)

Wang Tongsheng; Wu Xianfeng; Liu Jia; Cao Jifen; Song Tianbao; Feng Beiyuan; Zhang Baozhu

2014-01-01

Patent documentations are important scientific and technical documentations, which gather legal information, technical information and economic information together. According to WIPO forecasts, making full use of patent documentation can save 40% of research funding and 60% of the study period. Foreign patent documentations are the world's most valuable patent documentations, and many original technologies that have significant influence are first disclosed in foreign patent documentation. Studying and making use of foreign patent documentations can improve our starting point of scientific and technological innovation, and reduce the research investment. This paper analyzes foreign patent documentation and, combining with the actual development of nuclear technology in our country, makes specific recommendations for patent documentation research. (authors)

La Documentation photographique

Directory of Open Access Journals (Sweden)

Magali Hamm

2009-03-01

Full Text Available La Documentation photographique, revue destinée aux enseignants et étudiants en histoire-géographie, place l’image au cœur de sa ligne éditoriale. Afin de suivre les évolutions actuelles de la géographie, la collection propose une iconographie de plus en plus diversifiée : cartes, photographies, mais aussi caricatures, une de journal ou publicité, toutes étant considérées comme un document géographique à part entière. Car l’image peut se faire synthèse ; elle peut au contraire montrer les différentes facettes d’un objet ; souvent elle permet d’incarner des phénomènes géographiques. Associées à d’autres documents, les images aident les enseignants à initier leurs élèves à des raisonnements géographiques complexes. Mais pour apprendre à les lire, il est fondamental de les contextualiser, de les commenter et d’interroger leur rapport au réel.The Documentation photographique, magazine dedicated to teachers and students in History - Geography, places the image at the heart of its editorial line. In order to follow the evolutions of Geography, the collection presents a more and more diversified iconography: maps, photographs, but also drawings or advertisements, all this documents being considered as geographical ones. Because image can be a synthesis; on the contrary it can present the different facets of a same object; often it enables to portray geographical phenomena. Related to other documents, images assist the teachers in the students’ initiation to complex geographical reasoning. But in order to learn how to read them, it is fundamental to contextualize them, comment them and question their relations with reality.

Built Heritage Documentation and Management: AN Integrated Conservation Approach in Bagan

Science.gov (United States)

Mezzino, D.; Chan, L.; Santana Quintero, M.; Esponda, M.; Lee, S.; Min, A.; Pwint, M.

2017-08-01

flooding, as well as the lack of maintenance. Bagan provided an excellent case study to test the effectiveness of the proposed approach, to prevent and manage the damages of catastrophic events, and to support retrofitting actions. In order to test the flexibility of adopted methodology and workflow, temples with different features - in terms of architectural design, shape, and geometry - were selected. The goals of these documentation activities range from testing digital documentation workflows for the metric and visual recording of the site (reviewing strengths and limitations of particular recording techniques), to the definition of effective conditions assessment strategies.

BUILT HERITAGE DOCUMENTATION AND MANAGEMENT: AN INTEGRATED CONSERVATION APPROACH IN BAGAN

Directory of Open Access Journals (Sweden)

D. Mezzino

2017-08-01

seismic events and flooding, as well as the lack of maintenance. Bagan provided an excellent case study to test the effectiveness of the proposed approach, to prevent and manage the damages of catastrophic events, and to support retrofitting actions. In order to test the flexibility of adopted methodology and workflow, temples with different features – in terms of architectural design, shape, and geometry – were selected. The goals of these documentation activities range from testing digital documentation workflows for the metric and visual recording of the site (reviewing strengths and limitations of particular recording techniques, to the definition of effective conditions assessment strategies.

Multiple sclerosis documentation system (MSDS): moving from documentation to management of MS patients.

Science.gov (United States)

Ziemssen, Tjalf; Kempcke, Raimar; Eulitz, Marco; Großmann, Lars; Suhrbier, Alexander; Thomas, Katja; Schultheiss, Thorsten

2013-09-01

The long disease duration of multiple sclerosis and the increasing therapeutic options require a individualized therapeutic approach which should be carefully documented over years of observation. To switch from MS documentation to an innovative MS management, new computer- and internet-based tools could be implemented as we could demonstrate with the novel computer-based patient management system "multiple sclerosis management system 3D" (MSDS 3D). MSDS 3D allows documentation and management of visit schedules and mandatory examinations via defined study modules by integration of data input from various sources (patients, attending physicians and MS nurses). It provides forms for the documentation of patient visits as well as clinical and diagnostic findings. Information can be collected via interactive touch screens. Specific modules allow the management of highly efficacious treatments as natalizumab or fingolimod. MSDS can be used to transfer the documented data to databases as, e.g. the registry of the German MS society or REGIMS. MSDS has already been implemented successfully in clinical practice and is currently being evaluated in a multicenter setting. High-quality management and documentation are crucial for improvements in clinical practice and research work.

Scanning electron microscope/energy dispersive x ray analysis of impact residues on LDEF tray clamps

Science.gov (United States)

Bernhard, Ronald P.; Durin, Christian; Zolensky, Michael E.

1992-01-01

To better understand the nature of particulates in low-Earth orbit (LEO), and their effects on spacecraft hardware, we are analyzing residues found in impacts on the Long Duration Exposure Facility (LDEF) tray clamps. LDEF experiment trays were held in place by 6 to 8 chromic-anodized aluminum (6061-T6) clamps that were fastened to the spacecraft frame using three stainless steel hex bolts. Each clamp exposed an area of approximately 58 sq cm (4.8 cm x 12.7 cm x .45 cm, minus the bolt coverage). Some 337 out of 774 LDEF tray clamps were archived at JSC and are available through the Meteoroid & Debris Special Investigation Group (M&D SIG). Optical scanning of clamps, starting with Bay/Row A01 and working toward H25, is being conducted at JSC to locate and document impacts as small as 40 microns. These impacts are then inspected by Scanning Electron Microscopy/Energy Dispersive X-ray Analysis (SEM/EDXA) to select those features which contain appreciable impact residue material. Based upon the composition of projectile remnants, and using criteria developed at JSC, we have made a preliminary discrimination between micrometeoroid and space debris residue-containing impact features. Presently, 13 impacts containing significant amounts of unmelted and semi-melted micrometeoritic residues were forwarded to Centre National d'Etudes Spatiales (CNES) in France. At the CNES facilities, the upgraded impacts were analyzed using a JEOL T330A SEM equipped with a NORAN Instruments, Voyager X-ray Analyzer. All residues were quantitatively characterized by composition (including oxygen and carbon) to help understand interplanetary dust as possibly being derived from comets and asteroids.

INTEGRATED DOCUMENT MANAGEMENT SOLUTION FOR THE LOCAL GOVERNMENT

Directory of Open Access Journals (Sweden)

Nistor Razvan

2013-07-01

Full Text Available In this paper we present system analysis and design elements for the integrated document management solution at local governing authorities in the rural areas. While specifically dealing with the actual management of the Agricultural Register, an important primary unitary evidence document, we also keep a general character of the discussion, in order to argue for the generality of the proposed solution. Hence, for the identified and described problem space we propose an administrative and software infrastructure solution. This work is an empirical research in which our aim is primarily to identify key problems within the local governing authorities from several perspectives concerning the management of the Agricultural Register then to address those problems with an integrated document management system. For the proposed solution we give and argue the general system architecture and describe the key-mechanisms that support quality requirements. The relevance of this research concern is given by the impact of the actual Agricultural Register management on important stakeholders. This can be measured as the satisfaction felt by taxpayers and the performance of the local governing authorities, the Financial Administration, the Agency of Payments and Intervention in Agriculture and the Ministry of Agriculture and Rural Development. This work is also intended as a start-point for a new, modern thinking of the governing authorities in their pursue to improve public services. For this, in our work we highlight the importance of complete system analysis at all administrative levels as a main priority concern for all public managers. Our aim is the improvement of the public service by rising the awareness of the decision makers on the necessity of using integrated document management solutions for the provided services. Also, our work aims at increasing the efficiency with which nowadays, governing authorities invest public funds in various IT projects

Registration document 2005; Document de reference 2005

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

This reference document of Gaz de France provides information and data on the Group activities in 2005: financial informations, business, activities, equipments factories and real estate, trade, capital, organization charts, employment, contracts and research programs. (A.L.B.)

Long-term impacts of electricity generation systems. Draft technical report

International Nuclear Information System (INIS)

1998-01-01

Estimation of health and environmental impacts in a distant future driven by current electricity generation systems is not a well established scientific field. This issue includes many uncertainties which are seen in many processes of the impact estimation such as valuation techniques of environmental impacts for a long-term, and technology choice and policy options for a long run. When the IAEA held the Technical Committee Meeting on Estimating and Comparing Risks from Energy Systems in the Far Future in October 1997 in Vienna, there were many questions raised up from the participants on these issues. The purpose of this document is to introduce typical discussions at the Meeting, and to give a guidance to the methodological approaches for the readers. The decision making process is not central to this technical document. The main issue explained in the document is the ways of presenting health and environmental impacts in a distant future for decision makers. The primarily targeted readers of this document are, therefore, experts who will make the impact assessment and document the results to governmental offices and/or representatives of general public. For those who further implement decision making study, several documents are available from the IAEA. (in preparation 29]). To provide an effective guidance to the methodological approaches, several issues which are currently recognized as typical examples of the impacts on future generations were chosen. Global climate change, nuclear and non-nuclear wastes, long lived radionuclides dispersing world-wide, land use, and resource depletion are briefly discussed to illustrate several technical difficulties in estimating the impacts in the far future. About technology choice, the discussions illustrated in this document are based on only marginal increase of currently available electricity production systems. For smooth introduction of currently available methodological approaches to readers, issues like future

Documentation design for probabilistic risk assessment

International Nuclear Information System (INIS)

Parkinson, W.J.; von Herrmann, J.L.

1985-01-01

This paper describes a framework for documentation design of probabilistic risk assessment (PRA) and is based on the EPRI document NP-3470 ''Documentation Design for Probabilistic Risk Assessment''. The goals for PRA documentation are stated. Four audiences are identified which PRA documentation must satisfy, and the documentation consistent with the needs of the various audiences are discussed, i.e., the Summary Report, the Executive Summary, the Main Report, and Appendices. The authors recommend the documentation specifications discussed herein as guides rather than rigid definitions

How many scientific papers are mentioned in policy-related documents? An empirical investigation using Web of Science and Altmetric data.

Science.gov (United States)

Haunschild, Robin; Bornmann, Lutz

2017-01-01

In this short communication, we provide an overview of a relatively newly provided source of altmetrics data which could possibly be used for societal impact measurements in scientometrics. Recently, Altmetric-a start-up providing publication level metrics-started to make data for publications available which have been mentioned in policy-related documents. Using data from Altmetric, we study how many papers indexed in the Web of Science (WoS) are mentioned in policy-related documents. We find that less than 0.5% of the papers published in different subject categories are mentioned at least once in policy-related documents. Based on our results, we recommend that the analysis of (WoS) publications with at least one policy-related mention is repeated regularly (annually) in order to check the usefulness of the data. Mentions in policy-related documents should not be used for impact measurement until new policy-related sites are tracked.

Multimodal document management in radiotherapy

International Nuclear Information System (INIS)

Fahrner, H.; Kirrmann, S.; Roehner, F.; Schmucker, M.; Hall, M.; Heinemann, F.

2013-01-01

Background and purpose: After incorporating treatment planning and the organisational model of treatment planning in the operating schedule system (BAS, 'Betriebsablaufsystem'), complete document qualities were embedded in the digital environment. The aim of this project was to integrate all documents independent of their source (paper-bound or digital) and to make content from the BAS available in a structured manner. As many workflow steps as possible should be automated, e.g. assigning a document to a patient in the BAS. Additionally it must be guaranteed that at all times it could be traced who, when, how and from which source documents were imported into the departmental system. Furthermore work procedures should be changed that the documentation conducted either directly in the departmental system or from external systems can be incorporated digitally and paper document can be completely avoided (e.g. documents such as treatment certificate, treatment plans or documentation). It was a further aim, if possible, to automate the removal of paper documents from the departmental work flow, or even to make such paper documents superfluous. In this way patient letters for follow-up appointments should automatically generated from the BAS. Similarly patient record extracts in the form of PDF files should be enabled, e.g. for controlling purposes. Method: The available document qualities were analysed in detail by a multidisciplinary working group (BAS-AG) and after this examination and assessment of the possibility of modelling in our departmental workflow (BAS) they were transcribed into a flow diagram. The gathered specifications were implemented in a test environment by the clinical and administrative IT group of the department of radiation oncology and subsequent to a detailed analysis introduced into clinical routine. Results: The department has succeeded under the conditions of the aforementioned criteria to embed all relevant documents in the departmental

Computing symmetrical strength of N-grams: a two pass filtering approach in automatic classification of text documents.

Science.gov (United States)

Agnihotri, Deepak; Verma, Kesari; Tripathi, Priyanka

2016-01-01

The contiguous sequences of the terms (N-grams) in the documents are symmetrically distributed among different classes. The symmetrical distribution of the N-Grams raises uncertainty in the belongings of the N-Grams towards the class. In this paper, we focused on the selection of most discriminating N-Grams by reducing the effects of symmetrical distribution. In this context, a new text feature selection method named as the symmetrical strength of the N-Grams (SSNG) is proposed using a two pass filtering based feature selection (TPF) approach. Initially, in the first pass of the TPF, the SSNG method chooses various informative N-Grams from the entire extracted N-Grams of the corpus. Subsequently, in the second pass the well-known Chi Square (χ(2)) method is being used to select few most informative N-Grams. Further, to classify the documents the two standard classifiers Multinomial Naive Bayes and Linear Support Vector Machine have been applied on the ten standard text data sets. In most of the datasets, the experimental results state the performance and success rate of SSNG method using TPF approach is superior to the state-of-the-art methods viz. Mutual Information, Information Gain, Odds Ratio, Discriminating Feature Selection and χ(2).

Use of speech-to-text technology for documentation by healthcare providers.

Science.gov (United States)

Ajami, Sima

2016-01-01

Medical records are a critical component of a patient's treatment. However, documentation of patient-related information is considered a secondary activity in the provision of healthcare services, often leading to incomplete medical records and patient data of low quality. Advances in information technology (IT) in the health system and registration of information in electronic health records (EHR) using speechto- text conversion software have facilitated service delivery. This narrative review is a literature search with the help of libraries, books, conference proceedings, databases of Science Direct, PubMed, Proquest, Springer, SID (Scientific Information Database), and search engines such as Yahoo, and Google. I used the following keywords and their combinations: speech recognition, automatic report documentation, voice to text software, healthcare, information, and voice recognition. Due to lack of knowledge of other languages, I searched all texts in English or Persian with no time limits. Of a total of 70, only 42 articles were selected. Speech-to-text conversion technology offers opportunities to improve the documentation process of medical records, reduce cost and time of recording information, enhance the quality of documentation, improve the quality of services provided to patients, and support healthcare providers in legal matters. Healthcare providers should recognize the impact of this technology on service delivery.

Scheme Program Documentation Tools

DEFF Research Database (Denmark)

Nørmark, Kurt

2004-01-01

are separate and intended for different documentation purposes they are related to each other in several ways. Both tools are based on XML languages for tool setup and for documentation authoring. In addition, both tools rely on the LAML framework which---in a systematic way---makes an XML language available...... as named functions in Scheme. Finally, the Scheme Elucidator is able to integrate SchemeDoc resources as part of an internal documentation resource....

Evaluating Realized Impacts of DOE/EERE R&D Programs. Standard impact evaluation method

Energy Technology Data Exchange (ETDEWEB)

Ruegg, Rosalie [TIA Consulting, Inc. (United States); O' Connor, Alan C. [RTI International, Research Triangle Park, NC (United States); Loomis, Ross J. [RTI International, Research Triangle Park, NC (United States)

2014-08-01

This document provides guidance for evaluators who conduct impact assessments of research and development (R&D) programs for the U.S. Department of Energy’s (DOE) Office of Energy Efficiency and Renewable Energy (EERE). It is also targeted at EERE program staff responsible for initiating and managing commissioned impact studies. The guide specifies how to estimate economic benefits and costs, energy saved and installed or generated, environmental impacts, energy security impacts, and knowledge impacts of R&D investments in advanced energy technologies.

Documentation of Heritage Structures Through Geo-Crowdsourcing and Web-Mapping

Science.gov (United States)

Dhonju, H. K.; Xiao, W.; Shakya, B.; Mills, J. P.; Sarhosis, V.

2017-09-01

Heritage documentation has become increasingly urgent due to both natural impacts and human influences. The documentation of countless heritage sites around the globe is a massive project that requires significant amounts of financial and labour resources. With the concepts of volunteered geographic information (VGI) and citizen science, heritage data such as digital photographs can be collected through online crowd participation. Whilst photographs are not strictly geographic data, they can be geo-tagged by the participants. They can also be automatically geo-referenced into a global coordinate system if collected via mobile phones which are now ubiquitous. With the assistance of web-mapping, an online geo-crowdsourcing platform has been developed to collect and display heritage structure photographs. Details of platform development are presented in this paper. The prototype is demonstrated with several heritage examples. Potential applications and advancements are discussed.

Model documentation report: Transportation sector model of the National Energy Modeling System

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-02-01

Over the past year, several modifications have been made to the NEMS Transportation Model, incorporating greater levels of detail and analysis in modules previously represented in the aggregate or under a profusion of simplifying assumptions. This document is intended to amend those sections of the Model Documentation Report (MDR) which describe these superseded modules. Significant changes have been implemented in the LDV Fuel Economy Model, the Alternative Fuel Vehicle Model, the LDV Fleet Module, and the Highway Freight Model. The relevant sections of the MDR have been extracted from the original document, amended, and are presented in the following pages. A brief summary of the modifications follows: In the Fuel Economy Model, modifications have been made which permit the user to employ more optimistic assumptions about the commercial viability and impact of selected technological improvements. This model also explicitly calculates the fuel economy of an array of alternative fuel vehicles (AFV`s) which are subsequently used in the estimation of vehicle sales. In the Alternative Fuel Vehicle Model, the results of the Fuel Economy Model have been incorporated, and the program flows have been modified to reflect that fact. In the Light Duty Vehicle Fleet Module, the sales of vehicles to fleets of various size are endogenously calculated in order to provide a more detailed estimate of the impacts of EPACT legislation on the sales of AFV`s to fleets. In the Highway Freight Model, the previous aggregate estimation has been replaced by a detailed Freight Truck Stock Model, where travel patterns, efficiencies, and energy intensities are estimated by industrial grouping. Several appendices are provided at the end of this document, containing data tables and supplementary descriptions of the model development process which are not integral to an understanding of the overall model structure.

Emergency medicine resident physicians' perceptions of electronic documentation and workflow: a mixed methods study.

Science.gov (United States)

Neri, P M; Redden, L; Poole, S; Pozner, C N; Horsky, J; Raja, A S; Poon, E; Schiff, G; Landman, A

2015-01-01

To understand emergency department (ED) physicians' use of electronic documentation in order to identify usability and workflow considerations for the design of future ED information system (EDIS) physician documentation modules. We invited emergency medicine resident physicians to participate in a mixed methods study using task analysis and qualitative interviews. Participants completed a simulated, standardized patient encounter in a medical simulation center while documenting in the test environment of a currently used EDIS. We recorded the time on task, type and sequence of tasks performed by the participants (including tasks performed in parallel). We then conducted semi-structured interviews with each participant. We analyzed these qualitative data using the constant comparative method to generate themes. Eight resident physicians participated. The simulation session averaged 17 minutes and participants spent 11 minutes on average on tasks that included electronic documentation. Participants performed tasks in parallel, such as history taking and electronic documentation. Five of the 8 participants performed a similar workflow sequence during the first part of the session while the remaining three used different workflows. Three themes characterize electronic documentation: (1) physicians report that location and timing of documentation varies based on patient acuity and workload, (2) physicians report a need for features that support improved efficiency; and (3) physicians like viewing available patient data but struggle with integration of the EDIS with other information sources. We confirmed that physicians spend much of their time on documentation (65%) during an ED patient visit. Further, we found that resident physicians did not all use the same workflow and approach even when presented with an identical standardized patient scenario. Future EHR design should consider these varied workflows while trying to optimize efficiency, such as improving

Engineering Documentation and Data Control

Science.gov (United States)

Matteson, Michael J.; Bramley, Craig; Ciaruffoli, Veronica

2001-01-01

Mississippi Space Services (MSS) the facility services contractor for NASA's John C. Stennis Space Center (SSC), is utilizing technology to improve engineering documentation and data control. Two identified improvement areas, labor intensive documentation research and outdated drafting standards, were targeted as top priority. MSS selected AutoManager(R) WorkFlow from Cyco software to manage engineering documentation. The software is currently installed on over 150 desctops. The outdated SSC drafting standard was written for pre-CADD drafting methods, in other words, board drafting. Implementation of COTS software solutions to manage engineering documentation and update the drafting standard resulted in significant increases in productivity by reducing the time spent searching for documents.

21 CFR 25.42 - Environmental impact statements.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Environmental impact statements. 25.42 Section 25... ENVIRONMENTAL IMPACT CONSIDERATIONS Preparation of Environmental Documents § 25.42 Environmental impact... be a clear, concise, and detailed written statement describing: (1) The environmental impacts of a...

Comparison of historical documents for writership

Science.gov (United States)

Ball, Gregory R.; Pu, Danjun; Stritmatter, Roger; Srihari, Sargur N.

2010-01-01

Over the last century forensic document science has developed progressively more sophisticated pattern recognition methodologies for ascertaining the authorship of disputed documents. These include advances not only in computer assisted stylometrics, but forensic handwriting analysis. We present a writer verification method and an evaluation of an actual historical document written by an unknown writer. The questioned document is compared against two known handwriting samples of Herman Melville, a 19th century American author who has been hypothesized to be the writer of this document. The comparison led to a high confidence result that the questioned document was written by the same writer as the known documents. Such methodology can be applied to many such questioned documents in historical writing, both in literary and legal fields.

The impact of configural superiority on the processing of spatial information.

Science.gov (United States)

Bratch, Alexander; Barr, Shawn; Bromfield, W Drew; Srinath, Aparna; Zhang, Jack; Gold, Jason M

2016-09-01

The impact of context on perception has been well documented for over a century. In some cases, the introduction of context to a set of target features may produce a unified percept, leading to a quicker and more accurate classification; a configural superiority effect (Pomerantz, Sager, & Stoever, 1977). Although this effect has been well characterized in terms of the stimulus features that produce the effect, the specific impact context has on the spatial strategies adopted by observers when making perceptual judgments remains unclear. Here, we sought to address this question by using the methods of response classification and ideal observer analysis. In our main experiment, we used a stimulus set known to produce the configural superiority effect and found that although observers were faster in the presence of context, they were actually less efficient at extracting stimulus information. This surprising result was attributable to the use of a spatial strategy in which observers relied on redundant, noninformative features in the presence of context. A control experiment ruled out the possibility that the mere presence of added context led to these strategic shifts. Our results support previous notions about the nature of the perceptual shifts that are induced by the configural superiority effect. However, they also show that configural processing is more nuanced than originally thought: Although observers may be faster at making judgments when context induces the percept of a configural whole, there appears to be a hidden cost in terms of the efficiency with which information is used. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Guidance documents: Continued support to improve operations of fish hatcheries and field sites to reduce the impact or prevent establishment of New Zealand Mudsnails and other invasive mollusks

Science.gov (United States)

Moffitt, Christine M.

2017-01-01

This project tested and revised a risk assessment/management tool authored by Moffitt and Stockton designed to provide hatchery biologists and others a structure to measure risk and provide tools to control, prevent or eliminate invasive New Zealand mudsnails (NZMS) and other invasive mollusks in fish hatcheries and hatchery operations. The document has two parts: the risk assessment tool, and an appendix that summarizes options for control or management.The framework of the guidance document for risk assessment/hatchery tool combines approaches used by the Hazard Analysis and Critical Control Points (HACCP) process with those developed by the Commission for Environmental Cooperation (CEC), of Canada, Mexico, and the United States, in the Tri-National Risk Assessment Guidelines for Aquatic Alien Invasive Species. The framework approach for this attached first document assesses risk potential with two activities: probability of infestation and consequences of infestation. Each activity is treated equally to determine the risk potential. These two activities are divided into seven basic elements that utilize scientific, technical, and other relevant information in the process of the risk assessment. To determine the probability of infestation four steps are used that have scores reported or determined and averaged. This assessment follows a familiar HACCP process to assess pathways of entry, entry potential, colonization potential, spread potential. The economic, environmental and social consequences are considered as economic impact, environmental impact, and social and cultural influences.To test this document, the Principal Investigator worked to identify interested hatchery managers through contacts at regional aquaculture meetings, fish health meetings, and through the network of invasive species managers and scientists participating in the Western Regional Panel on Aquatic Nuisance Species and the 100th Meridian Initiative's Columbia River Basin Team, and the

Applications for electronic documents

International Nuclear Information System (INIS)

Beitel, G.A.

1995-01-01

This paper discusses the application of electronic media to documents, specifically Safety Analysis Reports (SARs), prepared for Environmental Restoration and Waste Management (ER ampersand WM) programs being conducted for the Department of Energy (DOE) at the Idaho National Engineering Laboratory (INEL). Efforts are underway to upgrade our document system using electronic format. To satisfy external requirements (DOE, State, and Federal), ER ampersand WM programs generate a complement of internal requirements documents including a SAR and Technical Safety Requirements along with procedures and training materials. Of interest, is the volume of information and the difficulty in handling it. A recently prepared ER ampersand WM SAR consists of 1,000 pages of text and graphics; supporting references add 10,000 pages. Other programmatic requirements documents consist of an estimated 5,000 pages plus references

The Vicinity of Program Documentation Tools

DEFF Research Database (Denmark)

Nørmark, Kurt

between program development tools.  In the central part of the paper we introduce a mapping of documentation flow between program development tools.  In addition we discuss a set of locally developed tools which is related to program documentation.  The use of test cases as examples in an interface......Program documentation plays a vital role in almost all programming processes.  Program documentation flows between separate tools of a modularized environment, and in between the components of an integrated development environment as well.  In this paper we discuss the flow of program documentation...... documentation tool is a noteworthy and valuable contribution to the documentation flow.  As an additional contribution we identify several circular relationships which illustrate feedback of documentation to the program editor from other tools in the development environment....

Feature-based attentional modulation of orientation perception in somatosensation

Directory of Open Access Journals (Sweden)

Meike Annika Schweisfurth

2014-07-01

Full Text Available In a reaction time study of human tactile orientation detection the effects of spatial attention and feature-based attention were investigated. Subjects had to give speeded responses to target orientations (parallel and orthogonal to the finger axis in a random stream of oblique tactile distractor orientations presented to their index and ring fingers. Before each block of trials, subjects received a tactile cue at one finger. By manipulating the validity of this cue with respect to its location and orientation (feature, we provided an incentive to subjects to attend spatially to the cued location and only there to the cued orientation. Subjects showed quicker responses to parallel compared to orthogonal targets, pointing to an orientation anisotropy in sensory processing. Also, faster reaction times were observed in location-matched trials, i.e. when targets appeared on the cued finger, representing a perceptual benefit of spatial attention. Most importantly, reaction times were shorter to orientations matching the cue, both at the cued and at the uncued location, documenting a global enhancement of tactile sensation by feature-based attention. This is the first report of a perceptual benefit of feature-based attention outside the spatial focus of attention in somatosensory perception. The similarity to effects of feature-based attention in visual perception supports the notion of matching attentional mechanisms across sensory domains.

Forensic document analysis using scanning microscopy

Science.gov (United States)

Shaffer, Douglas K.

2009-05-01

The authentication and identification of the source of a printed document(s) can be important in forensic investigations involving a wide range of fraudulent materials, including counterfeit currency, travel and identity documents, business and personal checks, money orders, prescription labels, travelers checks, medical records, financial documents and threatening correspondence. The physical and chemical characterization of document materials - including paper, writing inks and printed media - is becoming increasingly relevant for law enforcement agencies, with the availability of a wide variety of sophisticated commercial printers and copiers which are capable of producing fraudulent documents of extremely high print quality, rendering these difficult to distinguish from genuine documents. This paper describes various applications and analytical methodologies using scanning electron miscoscopy/energy dispersive (x-ray) spectroscopy (SEM/EDS) and related technologies for the characterization of fraudulent documents, and illustrates how their morphological and chemical profiles can be compared to (1) authenticate and (2) link forensic documents with a common source(s) in their production history.

Improving collaborative documentation in CMS

International Nuclear Information System (INIS)

Lassila-Perini, Kati; Salmi, Leena

2010-01-01

Complete and up-to-date documentation is essential for efficient data analysis in a large and complex collaboration like CMS. Good documentation reduces the time spent in problem solving for users and software developers. The scientists in our research environment do not necessarily have the interests or skills of professional technical writers. This results in inconsistencies in the documentation. To improve the quality, we have started a multidisciplinary project involving CMS user support and expertise in technical communication from the University of Turku, Finland. In this paper, we present possible approaches to study the usability of the documentation, for instance, usability tests conducted recently for the CMS software and computing user documentation.

Sandia Software Guidelines, Volume 2. Documentation

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. In consonance with the IEEE Standards for software documentation, this volume provides guidance in the selection of an adequate document set for a software project and example formats for many types of software documentation. A tutorial on life cycle documentation is also provided. Extended document thematic outlines and working examples of software documents are available on electronic media as an extension of this volume.

Recommended HSE-7 documents hierarchy

International Nuclear Information System (INIS)

Klein, R.B.; Jennrich, E.A.; Lund, D.M.; Danna, J.G.; Davis, K.D.; Rutz, A.C.

1990-01-01

This report recommends a hierarchy of waste management documents at Los Alamos National Laboratory (LANL or ''Laboratory''). The hierarchy addresses documents that are required to plan, implement, and document waste management programs at Los Alamos. These documents will enable the waste management group and the six sections contained within that group to satisfy requirements that are imposed upon them by the US Department of Energy (DOE), DOE Albuquerque Operations, US Environmental Protection Agency, various State of New Mexico agencies, and Laboratory management

Documentation of torture victims, assessment of the start procedure for medico-legal documentation.

Science.gov (United States)

Mandel, Lene; Worm, Lise

2007-01-01

A Pilot Study was performed at the Rehabilitation and Research Centre for Torture Victims (RCT) in Copenhagen in order to explore the possibilities for adding a medico-legal documentation component to the rehabilitation of torture victims already taking place. It describes the process and results on implementing medico-legal documentation in a rehabilitative setting. A modified version of the Guidelines in the Istanbul Protocol was developed on the basis of the review of literature and current practices described in "Documentation of torture victims, implementation of medico-legal protocols". The modified guidelines were tested on five clients. The aim was twofold: 1) To assess the client's attitude towards the idea of adding a documentation component to the rehabilitation process and: 2) To assess the practical circumstances of implementing the Istanbul Protocol in the everyday life of a rehabilitation centre. Results show that all five clients were positive towards the project and found comfort in being able to contribute to the fight against impunity. Also, the Pilot Study demonstrated that a large part of the medico-legal documentation was already obtained in the rehabilitation process. It was however not accessible due to lack of systematization and a data registering system. There are thus important synergies in collecting data for rehabilitation and documentation but a joint database system is necessary to realize these synergies.

TRANSPORTATION SYSTEM REQUIREMENTS DOCUMENT

International Nuclear Information System (INIS)

2004-01-01

This document establishes the Transportation system requirements for the U.S. Department of Energy's (DOE's) Civilian Radioactive Waste Management System (CRWMS). These requirements are derived from the Civilian Radioactive Waste Management System Requirements Document (CRD). The Transportation System Requirements Document (TSRD) was developed in accordance with LP-3.1Q-OCRWM, Preparation, Review, and Approval of Office of National Transportation Level-2 Baseline Requirements. As illustrated in Figure 1, the TSRD forms a part of the DOE Office of Civilian Radioactive Waste Management (OCRWM) Technical Baseline

Solid waste accident analysis in support of the Savannah River Waste Management Environmental Impact Statement

International Nuclear Information System (INIS)

Copeland, W.J.; Crumm, A.T.; Kearnaghan, D.P.; Rabin, M.S.; Rossi, D.E.

1994-07-01

The potential for facility accidents and the magnitude of their impacts are important factors in the evaluation of the solid waste management addressed in the Environmental Impact Statement. The purpose of this document is to address the potential solid waste management facility accidents for comparative use in support of the Environmental Impact Statement. This document must not be construed as an Authorization Basis document for any of the SRS waste management facilities. Because of the time constraints placed on preparing this accident impact analysis, all accident information was derived from existing safety documentation that has been prepared for SRS waste management facilities. A list of facilities to include in the accident impact analysis was provided as input by the Savannah River Technology Section. The accident impact analyses include existing SRS waste management facilities as well as proposed facilities. Safety documentation exists for all existing and many of the proposed facilities. Information was extracted from this existing documentation for this impact analysis. There are a few proposed facilities for which safety analyses have not been prepared. However, these facilities have similar processes to existing facilities and will treat, store, or dispose of the same type of material that is in existing facilities; therefore, the accidents can be expected to be similar

USNRC regulatory guidance for engineered safety feature air cleaning systems

International Nuclear Information System (INIS)

Bellamy, R.R.

1991-01-01

The need for clear, technically appropriate, and easily implementable guidance for the design, testing, and maintenance of nuclear air cleaning systems has long been recognized. Numerous industry consensus standards have been issued and revised over the last 30 years. Guidance has also been published by the US Nuclear Regulatory Commission in the form of regulations, regulatory guides, standard review plans, NUREG documents, and information notices. This paper will summarize the latest revisions to these documents and emphasize Regulatory Guide 1.52, Design, Testing, and Maintenance Criteria for Post-Accident Engineered-Safety-Feature Atmosphere Cleanup System Air Filtration and Adsorption Units of Light-Water-Cooled Nuclear Power Plants, which was last revised in 1978. The USNRC has undertaken a project to revise this regulatory guide, and the status of that revision is highlighted

STYLISTIC FEATURES OF ADVERTISING TEXTS OF INFORMATIVE AND COMPARATIVE TYPES

Directory of Open Access Journals (Sweden)

Poddubskaya, O.N.

2016-06-01

Full Text Available The relevance of this article is related to the fact that nowadays advertising has a very strong impact both on the consumer market, political and cultural life of society, and on the language and its development as a system. Advertising has given rise to the development of a special set of stylistic features of a text, formed under the influence of reviving advertising traditions in the Russian language and under the active impact of energetic and pushy European advertising. The purpose of this study is to explore stylistic features of informative and comparative advertising texts. The object of research is Russian-language advertising in printed media and on television. In the end of the article we made conclusions about groups of language means used for different stylistic devices in informative and comparative advertising texts. Analysis of stylistic features of modern informative and comparative advertising texts can be of great interest to specialists in the field of theoretical studies of modern advertising.

Environmental Scanning Electron Microscopy as a Useful Tool for Taxonomical Documentation of Parasitical Helminths

Czech Academy of Sciences Publication Activity Database

Tihlaříková, Eva; Neděla, Vilém; Mašová, Š.

2016-01-01

Roč. 22, S3 (2016), s. 1178-1179 ISSN 1431-9276 R&D Projects: GA ČR(CZ) GA14-22777S Institutional support: RVO:68081731 Keywords : parasitical Helminths * ESEM * taxonomical documentation Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 1.891, year: 2016

Impact of documentation errors on accuracy of cause of death coding in an educational hospital in Southern Iran.

Science.gov (United States)

Haghighi, Mohammad Hosein Hayavi; Dehghani, Mohammad; Teshnizi, Saeid Hoseini; Mahmoodi, Hamid

2014-01-01

Accurate cause of death coding leads to organised and usable death information but there are some factors that influence documentation on death certificates and therefore affect the coding. We reviewed the role of documentation errors on the accuracy of death coding at Shahid Mohammadi Hospital (SMH), Bandar Abbas, Iran. We studied the death certificates of all deceased patients in SMH from October 2010 to March 2011. Researchers determined and coded the underlying cause of death on the death certificates according to the guidelines issued by the World Health Organization in Volume 2 of the International Statistical Classification of Diseases and Health Related Problems-10th revision (ICD-10). Necessary ICD coding rules (such as the General Principle, Rules 1-3, the modification rules and other instructions about death coding) were applied to select the underlying cause of death on each certificate. Demographic details and documentation errors were then extracted. Data were analysed with descriptive statistics and chi square tests. The accuracy rate of causes of death coding was 51.7%, demonstrating a statistically significant relationship (p=.001) with major errors but not such a relationship with minor errors. Factors that result in poor quality of Cause of Death coding in SMH are lack of coder training, documentation errors and the undesirable structure of death certificates.

Characteristics of circular features on comet 67P/Churyumov-Gerasimenko

Science.gov (United States)

Deller, J. F.; Güttler, C.; Tubiana, C.; Hofmann, M.; Sierks, H.

2017-09-01

Comet 67P/Churyumov-Gerasimenko shows a large variety of circular structures such as pits, elevated roundish features in Imhotep, and even a single occurrence of a plausible fresh impact crater. Imaging the pits in the Ma'at region, aiming to understand their structure and origin drove the design of the final descent trajectory of the Rosetta spacecraft. The high-resolution images obtained during the last mission phase allow us to study these pits as exemplary circular features. A complete catalogue of circular features gives us the possibility to compare and classify these structures systematically.

Qualitative assessment of environmental impacts through fuzzy logic

International Nuclear Information System (INIS)

Peche G, Roberto

2008-01-01

The vagueness of many concepts usually utilized in environmental impact studies, along with frequent lack of quantitative information, suggests that fuzzy logic can be applied to carry out qualitative assessment of such impacts. This paper proposes a method for valuing environmental impacts caused by projects, based on fuzzy sets theory and methods of approximate reasoning. First, impacts must be described by a set of features. A linguistic variable is assigned to each feature, whose values are fuzzy sets. A fuzzy evaluation of environmental impacts is achieved using rule based fuzzy inference and the estimated fuzzy value of each feature. Generalized modus ponens has been the inference method. Finally, a crisp value of impact is attained by aggregation and defuzzification of all fuzzy results

Technical approach document

International Nuclear Information System (INIS)

1989-12-01

The Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, Public Law 95-604 (PL95-604), grants the Secretary of Energy the authority and responsibility to perform such actions as are necessary to minimize radiation health hazards and other environmental hazards caused by inactive uranium mill sites. This Technical Approach Document (TAD) describes the general technical approaches and design criteria adopted by the US Department of Energy (DOE) in order to implement remedial action plans (RAPS) and final designs that comply with EPA standards. It does not address the technical approaches necessary for aquifer restoration at processing sites; a guidance document, currently in preparation, will describe aquifer restoration concerns and technical protocols. This document is a second revision to the original document issued in May 1986; the revision has been made in response to changes to the groundwater standards of 40 CFR 192, Subparts A--C, proposed by EPA as draft standards. New sections were added to define the design approaches and designs necessary to comply with the groundwater standards. These new sections are in addition to changes made throughout the document to reflect current procedures, especially in cover design, water resources protection, and alternate site selection; only minor revisions were made to some of the sections. Sections 3.0 is a new section defining the approach taken in the design of disposal cells; Section 4.0 has been revised to include design of vegetated covers; Section 8.0 discusses design approaches necessary for compliance with the groundwater standards; and Section 9.0 is a new section dealing with nonradiological hazardous constituents. 203 refs., 18 figs., 26 tabs

Psychiatric Illness in Mentally Retarded Adolescents: Clinical Features.

Science.gov (United States)

Masi, Gabriele

1998-01-01

Describes the clinical features of the most important psychiatric disorders in mentally retarded adolescents: mood disorders, psychotic disorders, severe behavioral disorders, personality disorders, anxiety disorders, and attention-deficit The impact of mental retardation on personality development is confirmed by the high psychopathological…

Use of RCM simulations to assess the impact of climate change on wind energy availability

DEFF Research Database (Denmark)

Pryor, S.C.; Barthelmie, Rebecca Jane

2004-01-01

There is considerable interest in the potential impact of climate change on the feasibility and predictability of renewable energy sources including wind energy. This report presents an application and evaluation of physical (dynamical) downscaling toolsfor examining the impact of climate change...... on near-surface flow and hence wind energy density across northern Europe. It is shown that: - Simulated wind fields using the Rossby Centre coupled Regional Climate Model (RCM) (RCAO) during the control period(1961-1990) exhibit reasonable and realistic features as documented in in situ observations...... and reanalysis data products. - The differences between near-surface wind speed and direction calculated for the control run (January 1, 1961 – December 30, 1990)based on boundary conditions derived from two Global Climate Models (GCM): HadAM3H and ECHAM4/OPYC3 are comparable to changes in the climate change...

Adversarial Feature Selection Against Evasion Attacks.

Science.gov (United States)

Zhang, Fei; Chan, Patrick P K; Biggio, Battista; Yeung, Daniel S; Roli, Fabio

2016-03-01

Pattern recognition and machine learning techniques have been increasingly adopted in adversarial settings such as spam, intrusion, and malware detection, although their security against well-crafted attacks that aim to evade detection by manipulating data at test time has not yet been thoroughly assessed. While previous work has been mainly focused on devising adversary-aware classification algorithms to counter evasion attempts, only few authors have considered the impact of using reduced feature sets on classifier security against the same attacks. An interesting, preliminary result is that classifier security to evasion may be even worsened by the application of feature selection. In this paper, we provide a more detailed investigation of this aspect, shedding some light on the security properties of feature selection against evasion attacks. Inspired by previous work on adversary-aware classifiers, we propose a novel adversary-aware feature selection model that can improve classifier security against evasion attacks, by incorporating specific assumptions on the adversary's data manipulation strategy. We focus on an efficient, wrapper-based implementation of our approach, and experimentally validate its soundness on different application examples, including spam and malware detection.

Non-Federal participation in AC Intertie: Final environmental impact statement

International Nuclear Information System (INIS)

1994-01-01

This document contains the appendices for the Non-Federal Participation in AC Intertie Final Environmental Impact Statement. It contains all the supporting materials, documents and data for the EIS in nine appendices: A. Life-of-facilities capacity ownership proposal; B. Long-term Intertie access policy; C. Glossary; D. Biological assessment and supporting materials; E. Environmental impacts of generic resource types; F. Technical information on analysis methods and results; G. Affected environment supporting documentation; H. Public involvement activities; and I. Bibliography

Document organization by means of graphs

Directory of Open Access Journals (Sweden)

Santa Vallejo Figueroa

2016-12-01

Full Text Available Nowadays documents are the main way to represent information and knowledge in several domains. Continuously users store documents in hard disk or online media according to some personal organization based on topics, but such documents can contain one or more topics. This situation makes hard to access documents when is required. The current search engines are based on the name of file or content, but where the desired term or terms must match exactly as are in the content. In this paper, a method for organize documents by means of graphs is proposed, taking into account the topics of the documents. For this a graph for each document is generated taking into account synonyms, semantic related terms, hyponyms, and hypernyms of nouns and verbs contained in documents. The proposal have been compares against Google Desktop and LogicalDoc with interesting results.

Tensor-based Multi-view Feature Selection with Applications to Brain Diseases

Science.gov (United States)

Cao, Bokai; He, Lifang; Kong, Xiangnan; Yu, Philip S.; Hao, Zhifeng; Ragin, Ann B.

2015-01-01

In the era of big data, we can easily access information from multiple views which may be obtained from different sources or feature subsets. Generally, different views provide complementary information for learning tasks. Thus, multi-view learning can facilitate the learning process and is prevalent in a wide range of application domains. For example, in medical science, measurements from a series of medical examinations are documented for each subject, including clinical, imaging, immunologic, serologic and cognitive measures which are obtained from multiple sources. Specifically, for brain diagnosis, we can have different quantitative analysis which can be seen as different feature subsets of a subject. It is desirable to combine all these features in an effective way for disease diagnosis. However, some measurements from less relevant medical examinations can introduce irrelevant information which can even be exaggerated after view combinations. Feature selection should therefore be incorporated in the process of multi-view learning. In this paper, we explore tensor product to bring different views together in a joint space, and present a dual method of tensor-based multi-view feature selection (dual-Tmfs) based on the idea of support vector machine recursive feature elimination. Experiments conducted on datasets derived from neurological disorder demonstrate the features selected by our proposed method yield better classification performance and are relevant to disease diagnosis. PMID:25937823

Methods for assessing environmental impacts of a FUSRAP property-cleanup/interim-storage remedial action

International Nuclear Information System (INIS)

Wyman, D.J.

1982-12-01

This document provides a description of a property-cleanup/interim-storage action, explanation of how environmental impacts might occur, comprehensive treatment of most potential impacts that might occur as a result of this type of action, discussion of existing methodologies for estimating and assessing impacts, justification of the choice of specific methodologies for use in FUSRAP environmental reviews, assessments of representative impacts (or expected ranges of impacts where possible), suggested mitigation measures, and some key sources of information. The major topical areas covered are physical and biological impacts, radiological impacts, and socioeconomic impacts. Some project-related issues were beyond the scope of this document, including dollar costs, specific accident scenarios, project funding and changes in Congressional mandates, and project management (contracts, labor relations, quality assurance, liability, emergency preparedness, etc.). These issues will be covered in other documents supporting the decision-making process. Although the scope of this document covers property-cleanup and interim-storage actions, it is applicable to other similar remedial actions. For example, the analyses discussed herein for cleanup activities are applicable to any FUSRAP action that includes site cleanup

The methodological features of teaching subject «Fundamentals of production technologies»

Directory of Open Access Journals (Sweden)

Olesya Kornus

2017-11-01

Full Text Available In the article are reviews the methodical features teaching of the subject "Fundamentals of production technologies" as an example of training of students in the direction of 6.040104 Geography* and specialty 014 Secondary Education (Geography in the Sumy State A.S. Makarenko Pedagogical University. The subject «Fundamentals of production technologies» was introduced into curriculum bachelor of geography for quality training of geography teachers in pedagogical universities. This subject gives students the knowledge about the technical and economic features of the main industries, main technological schemes of production processes and the impact of industrial enterprises on the environment. The subject «Fundamentals of production technologies» is taught for second year students of natural-geographical faculty of the Sumy State A.S. Makarenko Pedagogical University. The educational process provides lectures, practical classes and self-dependent work. One of the forms of organization of training activities is the excursions to industrial enterprises of Sumy city. The organization of excursions includes preparation, conduct and report about the results of the excursion. For better learn the material excursion, preferably before the start of it to divide a group of students into small teams of 3-6 people. The report documentation includes a plan for characteristic of industrial enterprises, as well as multimedia presentation. The defense of report is passes like competition by voted. The team that wins the most votes gets the highest score. This form of subject study contributes to obtaining of positive educational outcomes and lasting knowledge, reliable formation of professional competencies of students-geographers.

Visual attention to features by associative learning.

Science.gov (United States)

Gozli, Davood G; Moskowitz, Joshua B; Pratt, Jay

2014-11-01

Expecting a particular stimulus can facilitate processing of that stimulus over others, but what is the fate of other stimuli that are known to co-occur with the expected stimulus? This study examined the impact of learned association on feature-based attention. The findings show that the effectiveness of an uninformative color transient in orienting attention can change by learned associations between colors and the expected target shape. In an initial acquisition phase, participants learned two distinct sequences of stimulus-response-outcome, where stimuli were defined by shape ('S' vs. 'H'), responses were localized key-presses (left vs. right), and outcomes were colors (red vs. green). Next, in a test phase, while expecting a target shape (80% probable), participants showed reliable attentional orienting to the color transient associated with the target shape, and showed no attentional orienting with the color associated with the alternative target shape. This bias seemed to be driven by learned association between shapes and colors, and not modulated by the response. In addition, the bias seemed to depend on observing target-color conjunctions, since encountering the two features disjunctively (without spatiotemporal overlap) did not replicate the findings. We conclude that associative learning - likely mediated by mechanisms underlying visual object representation - can extend the impact of goal-driven attention to features associated with a target stimulus. Copyright © 2014 Elsevier B.V. All rights reserved.

Nuclear power plants documentation system

International Nuclear Information System (INIS)

Schwartz, E.L.

1991-01-01

Since the amount of documents (type and quantity) necessary for the entire design of a NPP is very large, this implies that an overall and detailed identification, filling and retrieval system shall be implemented. This is even more applicable to the FINAL QUALITY DOCUMENTATION of the plant, as stipulated by IAEA Safety Codes and related guides. For such a purpose it was developed a DOCUMENTATION MANUAL, which describes in detail the before mentioned documentation system. Here we present the expected goals and results which we have to reach for Angra 2 and 3 Project. (author)

Electronic Document Management: A Human Resource Management Case Study

Directory of Open Access Journals (Sweden)

Thomas Groenewald

2004-11-01

Full Text Available This case study serve as exemplar regarding what can go wrong with the implementation of an electronic document management system. Knowledge agility and knowledge as capital, is outlined against the backdrop of the information society and knowledge economy. The importance of electronic document management and control is sketched thereafter. The literature review is concluded with the impact of human resource management on knowledge agility, which includes references to the learning organisation and complexity theory. The intervention methodology, comprising three phases, follows next. The results of the three phases are presented thereafter. Partial success has been achieved with improving the human efficacy of electronic document management, however the client opted to discontinue the system in use. Opsomming Die gevalle studie dien as voorbeeld van wat kan verkeerd loop met die implementering van ’n elektroniese dokumentbestuur sisteem. Teen die agtergrond van die inligtingsgemeenskap en kennishuishouding word kennissoepelheid en kennis as kapitaal bespreek. Die literatuurstudie word afgesluit met die inpak van menslikehulpbronbestuur op kennissoepelheid, wat ook die verwysings na die leerorganisasie en kompleksietydsteorie insluit. Die metodologie van die intervensie, wat uit drie fases bestaan, volg daarna. Die resultate van die drie fases word vervolgens aangebied. Slegs gedeelte welslae is behaal met die verbetering van die menslike doeltreffendheid ten opsigte van elektroniese dokumentbestuur. Die klient besluit egter om nie voort te gaan om die huidige sisteem te gebruik nie.

Audit of Orthopaedic Surgical Documentation

Directory of Open Access Journals (Sweden)

Fionn Coughlan

2015-01-01

Full Text Available Introduction. The Royal College of Surgeons in England published guidelines in 2008 outlining the information that should be documented at each surgery. St. James’s Hospital uses a standard operation sheet for all surgical procedures and these were examined to assess documentation standards. Objectives. To retrospectively audit the hand written orthopaedic operative notes according to established guidelines. Methods. A total of 63 operation notes over seven months were audited in terms of date and time of surgery, surgeon, procedure, elective or emergency indication, operative diagnosis, incision details, signature, closure details, tourniquet time, postop instructions, complications, prosthesis, and serial numbers. Results. A consultant performed 71.4% of procedures; however, 85.7% of the operative notes were written by the registrar. The date and time of surgery, name of surgeon, procedure name, and signature were documented in all cases. The operative diagnosis and postoperative instructions were frequently not documented in the designated location. Incision details were included in 81.7% and prosthesis details in only 30% while the tourniquet time was not documented in any. Conclusion. Completion and documentation of operative procedures were excellent in some areas; improvement is needed in documenting tourniquet time, prosthesis and incision details, and the location of operative diagnosis and postoperative instructions.

Final Environmental Impact Statement/Environmental Impact Report for continued operation of Lawrence Livermore National Laboratory and Sandia National Laboratories, Livermore

International Nuclear Information System (INIS)

1992-08-01

This Environmental Impact Statement/Environmental Impact Report (EIS/EIR) is prepared pursuant to the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA). This document analyzes the potential environmental impacts of the proposed action: continued operation, including near-term (within 5 to 10 years) proposed projects, of Lawrence Livermore National Laboratory (LLNL) and Sandia National Laboratories, Livermore (SNL, Livermore). Additionally, this document analyzes a no action alternative involving continuing operations at FY 1992 funding levels without further growth, a modification of operations alternative to reduce adverse environmental impacts of operations or facilities, and a shutdown and decommissioning alternative of UC discontinuing its management of LLNL after the current contract expires on September 30, 1992. This document assesses the environmental impacts of the Laboratories' operations on air and water quality, geological and ecological systems, occupational and public health risks, prehistoric and historic resources, endangered species, floodplains and wetlands, socioeconomic resources, hazardous waste management, site contamination, and other environmental issues. The EIS/EIR is divided into five volumes and two companion reports. This volume contains the Final EIS/EIR technical appendices which provide technical support for the analyses in Volume 1 and also provide additional information and references

CT and MRI features of acinar cell carcinoma of the pancreas with pathological correlations

International Nuclear Information System (INIS)

Hsu, M.-Y.; Pan, K.-T.; Chu, S.-Y.; Hung, C.-F.; Wu, R.-C.; Tseng, J.-H.

2010-01-01

Aim: To document the computed tomography (CT) and magnetic resonance imaging (MRI) features of acinar cell carcinoma of the pancreas and to correlate them with pathological findings to determine the unique imaging manifestations of this rare subtype tumour of the pancreas. Materials and methods: From January 1986 to August 2008, six patients (five men and one woman, mean age 61.3 years) with histologically proven acinar cell carcinoma of the pancreas underwent CT (n = 6) and MRI (n = 4) examinations. The imaging features of each tumour were documented and compared with pathological findings. Results: The tumours were distributed in the head (n = 4), body (n = 1), and tail (n = 1) of the pancreas. Four masses (67%) were uniformly or partially well-defined with thin, enhancing capsules. Central cystic components were found in five tumours (83%). Two tumours (33%) exhibited intratumoural haemorrhage, and one tumour (17%) had amorphous intratumoural calcification. In both CT and MRI, the tumours enhanced less than the adjacent normal pancreatic parenchyma. The signal intensity on MRI was predominantly T1 hypointense and T2 iso- to hyperintense. Conclusion: Acinar cell carcinoma of the pancreas has distinct imaging features, and both CT and MRI are useful and complementary imaging methods.

The effect of gamma-enhancing binaural beats on the control of feature bindings.

Science.gov (United States)

Colzato, Lorenza S; Steenbergen, Laura; Sellaro, Roberta

2017-07-01

Binaural beats represent the auditory experience of an oscillating sound that occurs when two sounds with neighboring frequencies are presented to one's left and right ear separately. Binaural beats have been shown to impact information processing via their putative role in increasing neural synchronization. Recent studies of feature-repetition effects demonstrated interactions between perceptual features and action-related features: repeating only some, but not all features of a perception-action episode hinders performance. These partial-repetition (or binding) costs point to the existence of temporary episodic bindings (event files) that are automatically retrieved by repeating at least one of their features. Given that neural synchronization in the gamma band has been associated with visual feature bindings, we investigated whether the impact of binaural beats extends to the top-down control of feature bindings. Healthy adults listened to gamma-frequency (40 Hz) binaural beats or to a constant tone of 340 Hz (control condition) for ten minutes before and during a feature-repetition task. While the size of visuomotor binding costs (indicating the binding of visual and action features) was unaffected by the binaural beats, the size of visual feature binding costs (which refer to the binding between the two visual features) was considerably smaller during gamma-frequency binaural beats exposure than during the control condition. Our results suggest that binaural beats enhance selectivity in updating episodic memory traces and further strengthen the hypothesis that neural activity in the gamma band is critically associated with the control of feature binding.

ENDF/B summary documentation

International Nuclear Information System (INIS)

Kinsey, R.

1979-07-01

This publication provides a localized source of descriptions for the evaluations contained in the ENDF/B Library. The summary documentation presented is intended to be a more detailed description than the (File 1) comments contained in the computer readable data files, but not so detailed as the formal reports describing each ENDF/B evaluation. The summary documentations were written by the CSEWB (Cross Section Evaluation Working Group) evaluators and compiled by NNDC (National Nuclear Data Center). This edition includes documentation for materials found on ENDF/B Version V tapes 501 to 516 (General Purpose File) excluding tape 504. ENDF/B-V also includes tapes containing partial evaluations for the Special Purpose Actinide (521, 522), Dosimetry (531), Activation (532), Gas Production (533), and Fission Product (541-546) files. The materials found on these tapes are documented elsewhere. Some of the evaluation descriptions in this report contain cross sections or energy level information

Utilizing Multi-Field Text Features for Efficient Email Spam Filtering

Directory of Open Access Journals (Sweden)

Wuying Liu

2012-06-01

Full Text Available Large-scale spam emails cause a serious waste of time and resources. This paper investigates the text features of email documents and the feature noises among multi-field texts, resulting in an observation of a power law distribution of feature strings within each text field. According to the observation, we propose an efficient filtering approach including a compound weight method and a lightweight field text classification algorithm. The compound weight method considers both the historical classifying ability of each field classifier and the classifying contribution of each text field in the current classified email. The lightweight field text classification algorithm straightforwardly calculates the arithmetical average of multiple conditional probabilities predicted from feature strings according to a string-frequency index for labeled emails storing. The string-frequency index structure has a random-sampling-based compressible property owing to the power law distribution and can largely reduce the storage space. The experimental results in the TREC spam track show that the proposed approach can complete the filtering task in low space cost and high speed, whose overall performance 1-ROCA exceeds the best one among the participators at the trec07p evaluation.

PSP Program close out documentation

Energy Technology Data Exchange (ETDEWEB)

Andringa, K.; Hootman, H.E.; Ferrara, A.S.; Smith, P.K.; Congdon, J.W.; Randolph, H.W.; Young, R.H.; Driggers, F.E.; Topp, S.V.

1985-12-31

In December 1982 DOE-SR directed SRL to study the feasibility and impact of a program to lower the U-236 content of the Highly Enriched Uranium (HEU) stockpile used as fuel for the SRP reactors. In response to this request SRL assessed four technologies, Atomic Vapor Laser Isotope Separation (AVLIS), Molecular Laser Isotope Separation (MLIS), Gas Centrifuge, and the Plasma Separation Process (PSP) for this purpose with the assistance of the Engineering Department. In April 1983 cost/benefit analyses for these processes, high spot cost estimates for production facilities, and process uncertainties were submitted to DOE-SR with a recommendation to proceed with the conceptual design and supporting development programs for a facility based on the use of the PSP process. The current program status for the PSP development program at SRL and the design and documentation of a production facility at SRP, referred to as the Fuel Improvement Demonstration Facility (FIDF), is described in this report.

Building 894 hazards assessment document

International Nuclear Information System (INIS)

Banda, Z.; Williams, M.

1996-07-01

The Department of Energy Order 5500.3A requires facility-specific hazards assessments be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with Building 894. The entire inventory was subjected to the screening criteria for potential airborne impact to onsite and offsite individuals out of which 9 chemicals were kept for further evaluation. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the release site, the atmospheric conditions, and the circumstances of the release. The greatest distance at which a postulated facility event will produce consequences exceeding the Early Severe Health Effects threshold is 130 meters. The highest emergency classification is a General Emergency. The Emergency Planning Zone is a nominal 130 meter area that conforms to DOE boundaries and physical/jurisdictional boundaries such as fence lines and streets

Building 6630 hazards assessment document

International Nuclear Information System (INIS)

Williams, M.; Banda, Z.

1996-10-01

The Department of Energy Order 5500.3A requires facility-specific hazards assessments be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with Building 6630. The entire inventory was subjected to the screening criteria for potential airborne impact to onsite and offsite individuals out of which one chemical was kept for further evaluation. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the chemical release site, the atmospheric conditions, and the circumstances of the release. The greatest distance at which a postulated facility event will produce consequences exceeding the Early Severe Health Effects threshold is 76 meters. The highest emergency classification is an Alert. The Emergency Planning Zone is a nominal 100 meter area that conforms to DOE boundaries and physical/jurisdictional boundaries such as fence lines and streets

Growing electronic documents created by researchers

Directory of Open Access Journals (Sweden)

Monika Weiss

2017-05-01

Full Text Available In the contemporary world technology is an indispensable element, both in personal and professional sphere. Despite the fact, that we do not attach significance to it in our everyday lives, the technological development engulfed us and still reminds us about that. In the face of dynamically growing digitization there occurred a new form of document – an electronic document. The study concerns the growing electronic documentation among researchers working at the Nicolaus Copernicus University in Toruń. The analysis of surveys and interviews resulted in thesis, that researchers use e-document more frequently than analog documentation. Flexibility and accessibility of this type of documents become a problem in personal papers which will be archived in the future – maybe in most part in the form of electronic documentation.

Desired features of smartphone applications promoting physical activity.

Science.gov (United States)

Rabin, Carolyn; Bock, Beth

2011-12-01

Approximately one-third of adults in the United States are physically inactive. This is a significant public health concern as physical activity (PA) can influence the risk of cardiovascular disease, diabetes, and certain forms of cancer. To minimize these health risks, effective PA interventions must be developed and disseminated to the vast number of individuals who remain sedentary. Smartphone technology presents an exciting opportunity for delivering PA interventions remotely. Although a number of PA applications are currently available for smartphones, these "apps" are not based on established theories of health behavior change and most do not include evidence-based features (e.g., reinforcement and goal setting). Our aim was to collect formative data to develop a smartphone PA app that is empirically and theoretically-based and incorporates user preferences. We recruited 15 sedentary adults to test three currently available PA smartphone apps and provide qualitative and quantitative feedback. Findings indicate that users have a number of specific preferences with regard to PA app features, including that apps provide automatic tracking of PA (e.g., steps taken and calories burned), track progress toward PA goals, and integrate a music feature. Participants also preferred that PA apps be flexible enough to be used with several types of PA, and have well-documented features and user-friendly interfaces (e.g., a one-click main page). When queried by the researcher, most participants endorsed including goal-setting and problem-solving features. These findings provide a blue print for developing a smartphone PA app that incorporates evidence-based components and user preferences.