Interdisciplinary environmental impact statement examinations with parallel licensing procedures

International Nuclear Information System (INIS)

Gassner, E.

1990-01-01

The article investigates the question how the interdisciplinary, collective, integrative environmental impact statement can predominate the decisions in individual licensing procedures. It illustrates the requirements of the Act on Environmental Impact Statements. According to this Act, measures are to be found which deal with the overall complex, i.e. the entire system. In the article, the monitoring project organization's primary responsibility is emphasized: Analysis and prognosis of a project's environmental impacts are transferred to this organization for decision-preparation. Subsequent corrections or supplementations during the official approval procedure, or incorporation of the public through the authorities, do not change the matter. An all-comprehensive assessment must be based on all-comprehensive standards. From the point of view of immissions this is minimization of adverse effects on the nature cycle and landscape matters; from the point of view of emissions it is the duty of environment-compatible waste management within the sense of waste management legislation having to serve public welfare. (orig.) [de

Cross-border cooperation in inner Scandinavia: A territorial impact assessment

Energy Technology Data Exchange (ETDEWEB)

Medeiros, Eduardo, E-mail: emedeiros@campus.ul.pt

2017-01-15

The use of territorial impact assessment procedures is gaining increasing relevance in the European Union policy evaluation processes. However, no concrete territorial impact assessment tools have been applied to evaluating EU cross-border programmes. In this light, this article provides a pioneering analysis on how to make use of territorial impact assessment procedures on cross-border programmes. More specifically, it assesses the main territorial impacts of the Inner Scandinavian INTERREG-A sub-programme, in the last 20 years (1996–2016). It focuses on its impacts on reducing the barrier effect, in all its main dimensions, posed by the presence of the administrative border. The results indicate a quite positive impact of the analysed cross-border cooperation programme, in reducing the barrier effect in all its main dimensions. The obtained potential impact values for each analysed dimension indicate, however, that the ‘economy-technology’ dimension was particularly favoured, following its strategic intervention focus in stimulating the economic activity and the attractiveness of the border area. - Highlights: • A territorial impact assessment method to assess cross-border cooperation is proposed. • This method rationale is based on the main dimensions of the barrier effect. • This method identified positive impacts in all analysed dimensions. • The economy-technological dimension was the most positively impacted one.

Environmental Impact Assessment for Olkiluoto 4 Nuclear Power Plant Unit in Finland

International Nuclear Information System (INIS)

Dersten, Riitta; Gahmberg, Sini; Takala, Jenni

2008-01-01

In order to improve its readiness for constructing additional production capacity, Teollisuuden Voima Oyj (TVO) initiated in spring 2007 the environmental impact assessment procedure (EIA procedure) concerning a new nuclear power plant unit that would possibly be located at Olkiluoto. When assessing the environmental impacts of the Olkiluoto nuclear power plant extension project, the present state of the environment was first examined, and after that, the changes caused by the projects as well as their significance were assessed, taking into account the combined impacts of the operations at Olkiluoto. The environmental impact assessment for the planned nuclear power plant unit covers the entire life cycle of the plant unit. (authors)

Environmental Impact Assessment for Olkiluoto 4 Nuclear Power Plant Unit in Finland

Energy Technology Data Exchange (ETDEWEB)

Dersten, Riitta; Gahmberg, Sini; Takala, Jenni [Teollisuuden Voima Oyj, Olkiluoto, FI-27160 Eurajoki (Finland)

2008-07-01

In order to improve its readiness for constructing additional production capacity, Teollisuuden Voima Oyj (TVO) initiated in spring 2007 the environmental impact assessment procedure (EIA procedure) concerning a new nuclear power plant unit that would possibly be located at Olkiluoto. When assessing the environmental impacts of the Olkiluoto nuclear power plant extension project, the present state of the environment was first examined, and after that, the changes caused by the projects as well as their significance were assessed, taking into account the combined impacts of the operations at Olkiluoto. The environmental impact assessment for the planned nuclear power plant unit covers the entire life cycle of the plant unit. (authors)

Discussion on the method of environmental radiological impact assessment for the highway construction project

International Nuclear Information System (INIS)

Qiu Guohua

2008-01-01

Based on the characteristics and environmental radiological impact of the highway construction project, the basic procedure of environmental radiological impact assessment for the highway construction project is put forward, including analysis and determination of contamination sources, selection of evaluation factors, determination of assessment range and dose limit, environmental investigation, environmental impact prediction and assessment. The working method of each procedure is analyzed. (authors)

Pollutant Assessments Group procedures manual: Volume 2, Technical procedures

Energy Technology Data Exchange (ETDEWEB)

1992-03-01

This is volume 2 of the manuals that describes the technical procedures currently in use by the Pollution Assessments Group. This manual incorporates new developments in hazardous waste assessment technology and administrative policy. Descriptions of the equipment, procedures and operations of such things as radiation detection, soil sampling, radionuclide monitoring, and equipment decontamination are included in this manual. (MB)

The convention on environmental impact assessment in a transboundary context

International Nuclear Information System (INIS)

Schrage, W.

2000-01-01

The ECE Convention on Environmental Impact Assessment in a Transboundary Context (EIA Convention) is the first multilateral treaty to specify the procedural rights and duties of Parties with regard to transboundary impacts of proposed activities and to provide procedures, in a transboundary context, for the consideration of environmental impacts in decision-making. The EIA Convention, elaborated under the auspices of the United Nations Economic Commission for Europe (ECE), was adopted at Espoo, Finland, in February 1991. Obligations stipulated, and measures and procedures provided for in this Convention are described. (author)

Environmental impact assessment based on planning support system

NARCIS (Netherlands)

Carsjens, G.J.; Chen, W.

2011-01-01

How to assess environmental impact is one of the keys in land use planning. This article described in detail the concepts of activities, impact zones, functions, and sensitivities, as well as the development of STEPP (strategic tool for integrating environmental aspects in planning procedures) based

Identifying and assessing ecotourism visitor impacts at selected protected areas in Costa Rica and Belize

Science.gov (United States)

Farrell, T.A.; Marion, J.L.

2001-01-01

Protected area visitation is an important component of ecotourism, and as such, must be sustainable. However, protected area visitation may degrade natural resources, particularly in areas of concentrated visitor activities like trails and recreation sites. This is an important concern in ecotourism destinations such as Belize and Costa Rica, because they actively promote ecotourism and emphasize the pristine qualities of their natural resources. Research on visitor impacts to protected areas has many potential applications in protected area management, though it has not been widely applied in Central and South America. This study targeted this deficiency through manager interviews and evaluations of alternative impact assessment procedures at eight protected areas in Belize and Costa Rica. Impact assessment procedures included qualitative condition class systems, ratings systems, and measurement-based systems applied to trails and recreation sites. The resulting data characterize manager perceptions of impact problems, document trail and recreation site impacts, and provide examples of inexpensive, efficient and effective rapid impact assessment procedures. Interview subjects reported a variety of impacts affecting trails, recreation sites, wildlife, water, attraction features and other resources. Standardized assessment procedures were developed and applied to record trail and recreation site impacts. Impacts affecting the study areas included trail proliferation, erosion and widening, muddiness on trails, vegetation cover loss, soil and root exposure, and tree damage on recreation sites. The findings also illustrate the types of assessment data yielded by several alternative methods and demonstrate their utility to protected area managers. The need for additional rapid assessment procedures for wildlife, water, attraction feature and other resource impacts was also identified.

Environmental impact assessment and eco-friendly decision-making in civil structures.

Science.gov (United States)

Kim, Sang-Hyo; Choi, Moon-Seock; Mha, Ho-Seong; Joung, Jung-Yeun

2013-09-15

This study develops two useful procedures in performing an environmental-impact assessment. One is the advanced life-cycle assessment (LCA) method, which effectively tracks the flow of materials and considers the recycling and demolition of a civil structure. The other is an eco-friendly decision-making procedure, which may effectively apply when determining the prototype of a civil structure. The advanced LCA method differs from traditional LCA procedure, as it classifies the input material prior to the impact assessment. Classification work is performed to establish independent life-cycle stages for each material. The processes of recycling and demolition are appropriately added to the life-cycle stages. The impact assessment is performed separately for the materials, and results are aggregated at the end of the analysis. The eco-friendly decision-making procedure enables designers to choose an economical, and environmentally friendly, alternative during the planning phase of the construction project. This procedure rationally amalgamates economical value and environmental effects into a single indicator. The life cycle cost (LCC) of a structure can be analysed by using conventional LCC tools, whereas the environmental impact is estimated by LCA. The results from LCC and LCA are then integrated by using either a CO2 conversion method or an analytical hierarchy process (AHP). The CO2 conversion method presents the result as a monetary value, whereas the AHP presents the result as a non-dimensional value. A practical example using a steel box girder bridge and a pre-stressed concrete (PSC) box-girder bridge is also given in order to aid the understanding of the presented procedure. Copyright © 2013 Elsevier Ltd. All rights reserved.

A qualitative method proposal to improve environmental impact assessment

International Nuclear Information System (INIS)

Toro, Javier; Requena, Ignacio; Duarte, Oscar; Zamorano, Montserrat

2013-01-01

In environmental impact assessment, qualitative methods are used because they are versatile and easy to apply. This methodology is based on the evaluation of the strength of the impact by grading a series of qualitative attributes that can be manipulated by the evaluator. The results thus obtained are not objective, and all too often impacts are eliminated that should be mitigated with corrective measures. However, qualitative methodology can be improved if the calculation of Impact Importance is based on the characteristics of environmental factors and project activities instead on indicators assessed by evaluators. In this sense, this paper proposes the inclusion of the vulnerability of environmental factors and the potential environmental impact of project activities. For this purpose, the study described in this paper defined Total Impact Importance and specified a quantification procedure. The results obtained in the case study of oil drilling in Colombia reflect greater objectivity in the evaluation of impacts as well as a positive correlation between impact values, the environmental characteristics at and near the project location, and the technical characteristics of project activities. -- Highlights: • Concept of vulnerability has been used to calculate the importance impact assessment. • This paper defined Total Impact Importance and specified a quantification procedure. • The method includes the characteristics of environmental and project activities. • The application has shown greater objectivity in the evaluation of impacts. • Better correlation between impact values, environment and the project has been shown

A qualitative method proposal to improve environmental impact assessment

Energy Technology Data Exchange (ETDEWEB)

Toro, Javier, E-mail: jjtoroca@unal.edu.co [Institute of Environmental Studies, National University of Colombia at Bogotá (Colombia); Requena, Ignacio, E-mail: requena@decsai.ugr.es [Department of Computer Science and Artificial Intelligence, University of Granada (Spain); Duarte, Oscar, E-mail: ogduartev@unal.edu.co [National University of Colombia at Bogotá, Department of Electrical Engineering and Electronics (Colombia); Zamorano, Montserrat, E-mail: zamorano@ugr.es [Department of Civil Engineering, University of Granada (Spain)

2013-11-15

In environmental impact assessment, qualitative methods are used because they are versatile and easy to apply. This methodology is based on the evaluation of the strength of the impact by grading a series of qualitative attributes that can be manipulated by the evaluator. The results thus obtained are not objective, and all too often impacts are eliminated that should be mitigated with corrective measures. However, qualitative methodology can be improved if the calculation of Impact Importance is based on the characteristics of environmental factors and project activities instead on indicators assessed by evaluators. In this sense, this paper proposes the inclusion of the vulnerability of environmental factors and the potential environmental impact of project activities. For this purpose, the study described in this paper defined Total Impact Importance and specified a quantification procedure. The results obtained in the case study of oil drilling in Colombia reflect greater objectivity in the evaluation of impacts as well as a positive correlation between impact values, the environmental characteristics at and near the project location, and the technical characteristics of project activities. -- Highlights: • Concept of vulnerability has been used to calculate the importance impact assessment. • This paper defined Total Impact Importance and specified a quantification procedure. • The method includes the characteristics of environmental and project activities. • The application has shown greater objectivity in the evaluation of impacts. • Better correlation between impact values, environment and the project has been shown.

Impact of Resident Surgeons on Procedure Length based on Common Pediatric Otolaryngology Cases

Science.gov (United States)

Puram, Sidharth V.; Kozin, Elliott D.; Sethi, Rosh; Alkire, Blake; Lee, Daniel J.; Gray, Stacey T.; Shrime, Mark G.; Cohen, Michael

2015-01-01

Background Surgical education remains an important mission of academic medical centers. Financial pressures, however, may favor improved operating room (OR) efficiency at the expense of surgical education. We aim to characterize resident impact on the duration of procedural time using common pediatric otolaryngologic cases which do not necessitate a surgical assistant and assess whether other factors modify the extent to which residents impact OR efficiency. Study Design We retrospectively reviewed resident and attending surgeon total OR and procedural times for isolated tonsillectomy, adenoidectomy, tonsillectomy with adenoidectomy (T&A) and bilateral myringotomy with tube insertion between 2009 and 2013. We included cases supervised or performed by one of four teaching surgeons in children with ASA otolaryngology procedures. While residents may increase operative times, addressing other system-wide issues may decrease impact of time needed for education and added efficiencies of resident participation may exist throughout the perioperative period. Our model is applicable to surgical education across specialties. Level of Evidence 4 PMID:25251257

Framework and operational procedure for implementing Strategic Environmental Assessment in China

International Nuclear Information System (INIS)

Bao Cunkuan; Lu Yongsen; Shang Jincheng

2004-01-01

Over the last 20 years, Environmental Impact Assessment (EIA) has been implemented and become an important instrument for decision-making in development projects in China. The Environmental Impact Assessment Law of the P.R. China was promulgated on 28 October 2002 and will be put into effect on 1 September of 2003. The law provides that Strategic Environmental Assessment (SEA) is required in regional and sector plans and programs. This paper introduces the research achievements and practice of SEA in China, discusses the relationship of SEA and 'integrating of environment and development in decision-making (IEDD)', and relevant political and legal basis of SEA. The framework and operational procedures of SEA administration and enforcement are presented. Nine cases are analyzed and some proposals are given

The screening and scoping of Environmental Impact Assessment and Strategic Environmental Assessment of Carbon Capture and Storage in the Netherlands

International Nuclear Information System (INIS)

Koornneef, Joris; Faaij, Andre; Turkenburg, Wim

2008-01-01

The Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) are procedural tools which have as goal to assess and evaluate possible environmental effects of, respectively, a proposed project or policy plan. The goal of this article is to explore possible bottlenecks in applying both the EIA and SEA procedures on Carbon Capture and Storage (CCS) activities in the Netherlands, as experience is currently minimal or lacking. In this study we focus mainly on the institutional and procedural aspects of the screening and scoping phases of both procedures. This is achieved by reviewing EIA and SEA procedures for analogue projects for the three distinctive process steps of a CCS project, namely the power plant with capture, the transport and finally the underground storage of the CO 2 . Additionally, EIA and SEA or similar procedures on CCS in other countries are reviewed and the legal framework for the Dutch EIA and SEA is studied. This article shows a concise overview of the EIA and SEA procedure in the Netherlands and the relation between both procedures. Based on our findings we have constructed a conceptual taxonomy for the scope of both procedures for CCS in the Netherlands. This taxonomy conceptualizes the possible integration of assessing the environmental impacts for tiered levels of decision making. This integration might be needed for first CCS projects as decisions on the strategic (spatial planning) level are currently absent for CCS in the Netherlands. Perpendicular to such integration is the integration of linked activities in the CCS chain and their alternatives, into one procedure. We argue that it would be beneficial to combine the separate EIA procedures for CCS activities into one procedure or at least provide close linkage between them. This issue should be carefully considered by regulators, competent authorities and project initiators in an early stage to avoid delaying legal procedures in the future. For the same reason

Validity, reliability, feasibility, acceptability and educational impact of direct observation of procedural skills (DOPS).

Science.gov (United States)

Naeem, Naghma

2013-01-01

Direct observation of procedural skills (DOPS) is a new workplace assessment tool. The aim of this narrative review of literature is to summarize the available evidence about the validity, reliability, feasibility, acceptability and educational impact of DOPS. A PubMed database and Google search of the literature on DOPS published from January 2000 to January 2012 was conducted which yielded 30 articles. Thirteen articles were selected for full text reading and review. In the reviewed literature, DOPS was found to be a useful tool for assessment of procedural skills, but further research is required to prove its utility as a workplace based assessment instrument.

Assessment of Containment Structures Against Missile Impact Threats

Institute of Scientific and Technical Information of China (English)

LI Q M

2006-01-01

In order to ensure the highest safety requirements,nuclear power plant structures (the containment structures,the fuel storages and transportation systems) should be assessed against all possible internal and external impact threats.The internal impact threats include kinetic missiles generated by the failure of high pressure vessels and pipes,the failure of high speed rotating machineries and accidental drops.The external impact threats may come from airborne missiles,aircraft impact,explosion blast and fragments.The impact effects of these threats on concrete and steel structures in a nuclear power plant are discussed.Methods and procedures for the impact assessment of nuclear power plants are introduced.Recent studies on penetration and perforation mechanics as well as progresses on dynamic properties of concrete-like materials are presented to increase the understanding of the impact effects on concrete containment structures.

Assessment of Competence in EVAR Procedures

DEFF Research Database (Denmark)

Strøm, M; Lönn, L; Bech, B

2017-01-01

OBJECTIVE/BACKGROUND: To develop a procedure specific global rating scale for assessment of operator competence in endovascular aortic repair (EVAR). METHODS: A Delphi approach was used to achieve expert consensus. A panel of 32 international experts (median 300 EVAR procedures, range 200...... suggested by the panel and reduced to seven pivotal assessment items that reached consensus, Cronbach's alpha = 0.82. The seven item rating scale covers key elements of competence in EVAR stent placement and deployment. Each item has well defined grades with explicit anchors at unacceptable, acceptable......, and superior performance on a 5 point Likert scale. CONCLUSION: The Delphi methodology allowed for international consensus on a new procedure specific global rating scale for assessment of competence in EVAR. The resulting scale, EndoVascular Aortic Repair Assessment of Technical Expertise (EVARATE...

An environmental impact assessment system for agricultural R and D

International Nuclear Information System (INIS)

Rodrigues, Geraldo Stachetti; Campanhola, Clayton; Kitamura, Paulo Choji

2003-01-01

A strategic planning process has been implemented at the Brazilian Agricultural Research Agency (Embrapa) to introduce sustainable agriculture concepts in all steps of Research and Development (R and D). An essential part of the devised mission statement called for the impact assessment of all technology innovation resulting from R and D, under field conditions (ex-post). However, methods for impact assessment of technology innovations at the farmstead level appropriate for the institutional context were lacking. The environmental impact assessment (EIA) system (AMBITEC-AGRO) developed to attend that demand is composed by a set of weighing matrices constructed in an electronic spreadsheet. Impact indicators are evaluated in the field in an interview/survey, and weighed according to their spatial scale and importance toward effecting environmental impacts. The results of these weighing procedures are expressed graphically in the assessment spreadsheets. Finally, the indicator evaluations are composed into an Environmental Impact Index for the agricultural technology innovation

Impact of Procedure-Related Complications on Long-term Islet Transplantation Outcome.

Science.gov (United States)

Caiazzo, Robert; Vantyghem, Marie-Christine; Raverdi, Violeta; Bonner, Caroline; Gmyr, Valery; Defrance, Frederique; Leroy, Clara; Sergent, Geraldine; Hubert, Thomas; Ernst, Oliver; Noel, Christian; Kerr-Conte, Julie; Pattou, François

2015-05-01

Pancreatic islet transplantation offers a promising biotherapy for the treatment of type 1 diabetes, but this procedure has met significant challenges over the years. One such challenge is to address why primary graft function still remains inconsistent after islet transplantation. Several variables have been shown to affect graft function, but the impact of procedure-related complications on primary and long-term graft functions has not yet been explored. Twenty-six patients with established type 1 diabetes were included in this study. Each patient had two to three intraportal islet infusions to obtain 10,000 islet equivalent (IEQ)/kg in body weight, equaling a total of 68 islet infusions. Islet transplantation consisted of three sequential fresh islet infusions within 3 months. Islet infusions were performed surgically or under ultrasound guidance, depending on patient morphology, availability of the radiology suite, and patient medical history. Prospective assessment of adverse events was recorded and graded using "Common Terminology Criteria for adverse events in Trials of Adult Pancreatic Islet Transplantation." There were no deaths or patients dropouts. Early complications occurred in nine of 68 procedures. β score 1 month after the last graft and optimal graft function (β score ≥7) rate were significantly lower in cases of procedure-related complications (P = 0.02, P = 0.03). Procedure-related complications negatively impacted graft function (P = 0.009) and was an independent predictive factor of long-term graft survival (P = 0.033) in multivariate analysis. Complications occurring during radiologic or surgical intraportal islet transplantation significantly impair primary graft function and graft survival regardless of their severity.

15 CFR 990.27 - Use of assessment procedures.

Science.gov (United States)

2010-01-01

...) NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE OIL POLLUTION ACT REGULATIONS NATURAL RESOURCE DAMAGE ASSESSMENTS Authorities § 990.27 Use of assessment procedures. (a) Standards for... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Use of assessment procedures. 990.27...

Social impact assessments: Developing a consolidated conceptual framework

Energy Technology Data Exchange (ETDEWEB)

Arce-Gomez, Antonio, E-mail: aarcegomez@swin.edu.au; Donovan, Jerome D., E-mail: jdonovan@swin.edu.au; Bedggood, Rowan E., E-mail: rbedggood@swin.edu.au

2015-01-15

Social Impact Assessments (SIAs) have played an increasingly important role in the conduct of planned interventions, providing proponents the capacity to assess and manage the social consequences of their activities. Whilst the SIA field has experienced significant conceptual and practical development over the last decade, efforts at consolidating this within one framework have been limited. In this paper, we incorporate this new knowledge by redeveloping and thus updating the SIA procedural framework developed by Interorganizational Committee on Guidelines and Principles for Social Impact Assessment. In doing so, this updated procedural framework has attempted to incorporate current ‘best practice’ that focuses on participatory approaches to undertaking an SIA. This involved making adaptions to two steps, expansions to five steps, integration of a stronger participatory approach to six steps, and the development of a new step, Management and Evaluation reflecting moves towards ex-post use of SIA processes. It is hoped that this consolidation of the literature of a decade's worth of key findings in SIA research will lead to further efforts towards a meta-evaluation of SIA literature and a platform from which newer developments may be further investigated.

Social impact assessments: Developing a consolidated conceptual framework

International Nuclear Information System (INIS)

Arce-Gomez, Antonio; Donovan, Jerome D.; Bedggood, Rowan E.

2015-01-01

Social Impact Assessments (SIAs) have played an increasingly important role in the conduct of planned interventions, providing proponents the capacity to assess and manage the social consequences of their activities. Whilst the SIA field has experienced significant conceptual and practical development over the last decade, efforts at consolidating this within one framework have been limited. In this paper, we incorporate this new knowledge by redeveloping and thus updating the SIA procedural framework developed by Interorganizational Committee on Guidelines and Principles for Social Impact Assessment. In doing so, this updated procedural framework has attempted to incorporate current ‘best practice’ that focuses on participatory approaches to undertaking an SIA. This involved making adaptions to two steps, expansions to five steps, integration of a stronger participatory approach to six steps, and the development of a new step, Management and Evaluation reflecting moves towards ex-post use of SIA processes. It is hoped that this consolidation of the literature of a decade's worth of key findings in SIA research will lead to further efforts towards a meta-evaluation of SIA literature and a platform from which newer developments may be further investigated

Defect assessment procedures at high temperature

International Nuclear Information System (INIS)

Ainsworth, R.A.

1991-01-01

A comprehensive assessment procedure for the high-temperature response of structures is being produced. The procedure is referred to as R5 and is written as a series of step-by-step instructions in a number of volumes. This paper considers in detail those parts of R5 which address the behaviour of defects. The defect assessment procedures may be applied to defects found in service, postulated defects, or defects formed during operation as a result of creep-fatigue loading. In the last case, a method is described for deducing from endurance data the number of cycles to initiate a crack of a specified size. Under steady loading, the creep crack tip parameter C * is used to assess crack growth. Under cyclic loading, the creep crack growth during dwell periods is stiell governed by C * but crack growth due to cyclic excursions must also be included. This cyclic crack growth is described by an effective stress intensity factor range. A feature of the R5 defect assessment procedures in that they are based on simplified methods and approximate reference stress methods are described which enable C * in a component to be evaluated. It is shown by comparison with theoretical calculations and experimental data that reliable estimates of C * and the associated crack growth are obtained provided realistic creep strain rate date are used in the reference stress approximation. (orig./HP)

Economic Assessment and Budgetary Impact of a Telemedicine Procedure and Spirometry Quality Control in the Primary Care Setting.

Science.gov (United States)

Marina, Nuria; Bayón, Juan Carlos; López de Santa María, Elena; Gutiérrez, Asunción; Inchausti, Marta; Bustamante, Victor; Gáldiz, Juan B

2016-01-01

To evaluate the economic impact of a telemedicine procedure designed to improve the quality of lung function testing (LFT) in primary care in a public healthcare system, compared with the standard method. The economic impact of 9,039 LFTs performed in 51 health centers (2010-2013) using telespirometry (TS) compared to standard spirometry (SS) was studied. TS costs more per unit than SS (€47.80 vs. €39.70) (2013), but the quality of the TS procedure is superior (84% good quality, compared to 61% using the standard procedure). Total cost of TS was €431,974 (compared with €358,306€ for SS), generating an economic impact of €73,668 (2013). The increase in cost for good quality LFT performed using TS was €34,030 (2010) and €144,295 (2013), while the costs of poor quality tests fell by €15,525 (2010) and 70,627€ (2013). The cost-effectiveness analysis concludes that TS is 23% more expensive and 46% more effective. Healthcare costs consequently fall as the number of LFTs performed by TS rises. Avoiding poor quality, invalid LFTs generates savings that compensate for the increased costs of performing LFTs with TS, making it a cost-effective method. Copyright © 2014 SEPAR. Published by Elsevier Espana. All rights reserved.

A Simplified Procedure for Reliability Estimation of Underground Concrete Barriers against Normal Missile Impact

Directory of Open Access Journals (Sweden)

N. A. Siddiqui

2011-06-01

Full Text Available Underground concrete barriers are frequently used to protect strategic structures like Nuclear power plants (NPP, deep under the soil against any possible high velocity missile impact. For a given range and type of missile (or projectile it is of paramount importance to examine the reliability of underground concrete barriers under expected uncertainties involved in the missile, concrete, and soil parameters. In this paper, a simple procedure for the reliability assessment of underground concrete barriers against normal missile impact has been presented using the First Order Reliability Method (FORM. The presented procedure is illustrated by applying it to a concrete barrier that lies at a certain depth in the soil. Some parametric studies are also conducted to obtain the design values which make the barrier as reliable as desired.

Analysis of the Environmental Impact Assessment (EIA) Directive and the EIA decision in Turkey

International Nuclear Information System (INIS)

Bilgin, Ayla

2015-01-01

The Environmental Impact Assessment (EIA) Directive first entered into force in the United States in 1969, and began to be implemented in many other countries by 1990. The first Environmental Impact Assessment (EIA) Directive in Turkey was published on February 7, 1993, under the Environmental Law No. 2872. The EIA Directive was revised seven times on June 23, 1997, June 6, 2002, December 16, 2003, July 17, 2008, October 3, 2013, and November 25, 2014. Several amendments were made during this process. The first EIA Directive dated 1993 was narrow in scope and its procedure was long, while the amendments in 2003, 2008, 2013, and 2014 widened the scope of the EIA, and shortened the EIA assessment procedures. In this study, the amendments to the Turkish EIA Directive were analysed, and their effect on the number of EIA decisions made was addressed. It was concluded that the uncertainties in EIA procedures were removed, procedures were shortened, and as a result, the number of EIA decisions increased thanks to the revisions made in line with harmonisation with European Union (EU) acquis. - Highlights: • Demonstrates the Environmental Impact Assessment practices in Turkey. • Demonstrates the application of the EIA in Turkey by sector. • Demonstrates the amendments of the EIA by-laws in Turkey. • Demonstrates the changes in EIA practices and EIA decisions

Analysis of the Environmental Impact Assessment (EIA) Directive and the EIA decision in Turkey

Energy Technology Data Exchange (ETDEWEB)

Bilgin, Ayla

2015-07-15

The Environmental Impact Assessment (EIA) Directive first entered into force in the United States in 1969, and began to be implemented in many other countries by 1990. The first Environmental Impact Assessment (EIA) Directive in Turkey was published on February 7, 1993, under the Environmental Law No. 2872. The EIA Directive was revised seven times on June 23, 1997, June 6, 2002, December 16, 2003, July 17, 2008, October 3, 2013, and November 25, 2014. Several amendments were made during this process. The first EIA Directive dated 1993 was narrow in scope and its procedure was long, while the amendments in 2003, 2008, 2013, and 2014 widened the scope of the EIA, and shortened the EIA assessment procedures. In this study, the amendments to the Turkish EIA Directive were analysed, and their effect on the number of EIA decisions made was addressed. It was concluded that the uncertainties in EIA procedures were removed, procedures were shortened, and as a result, the number of EIA decisions increased thanks to the revisions made in line with harmonisation with European Union (EU) acquis. - Highlights: • Demonstrates the Environmental Impact Assessment practices in Turkey. • Demonstrates the application of the EIA in Turkey by sector. • Demonstrates the amendments of the EIA by-laws in Turkey. • Demonstrates the changes in EIA practices and EIA decisions.

Spent fuel repositories and environmental impact assessment; the legal situation i Finland

International Nuclear Information System (INIS)

Manninen, J.

1995-01-01

The Finnish Act on Environmental Impact Assessment (468/94) builds on the EU Directive 85/337 on the assessment of the effects of certain public and private projects on the environment. The Act is supplemented by the Decree on Environmental Impact Assessment (792/88). The EIA Act is applicable to all nuclear facilities, spent fuel repositories included. In practice the new Act does not introduce any drastic changes to the legal situation, as far as nuclear facilities are concerned. The Finnish Nuclear Energy Act (990/87), which entered into force 1988, already contains most of the basic elements of the environmental impact assessment. In the article, the different steps in the Finnish EIA procedure is described

Assessing the impact of windfarms - the learning curve in Cornwall

International Nuclear Information System (INIS)

Hull, A.

1998-01-01

This paper uses windfarm application decisions in Cornwall between 1989 and 1995 to illustrate the learning curve of planners in assessing appropriate windfarm locations, and in particular how the process of knowledge construction is constantly reviewed and modified in the light of experience and circumstance. One of the accepted purposes of Environmental Impact Assessment is to predict the possible effects, both beneficial and adverse, of the development on the environment. In practice what is beneficial and what is adverse can be a matter of dispute. The paper draws out the role of the planning system in assessing what is problematic or benign, and the practical strategies and procedures used to assess and control the environmental impacts of wind energy schemes. (Author)

A comprehensive environmental impact assessment method for shale gas development

Directory of Open Access Journals (Sweden)

Renjin Sun

2015-03-01

Full Text Available The great success of US commercial shale gas exploitation stimulates the shale gas development in China, subsequently, the corresponding supporting policies were issued in the 12th Five-Year Plan. But from the experience in the US shale gas development, we know that the resulted environmental threats are always an unavoidable issue, but no uniform and standard evaluation system has yet been set up in China. The comprehensive environment refers to the combination of natural ecological environment and external macro-environment. In view of this, we conducted a series of studies on how to set up a comprehensive environmental impact assessment system as well as the related evaluation methodology and models. First, we made an in-depth investigation into shale gas development procedures and any possible environmental impacts, and then compared, screened and modified environmental impact assessment methods for shale gas development. Also, we established an evaluating system and assessment models according to different status of the above two types of environment: the correlation matrix method was employed to assess the impacts on natural ecological environment and the optimization distance method was modified to evaluate the impacts on external macro-environment. Finally, we substitute the two subindexes into the comprehensive environmental impact assessment model and achieved the final numerical result of environmental impact assessment. This model can be used to evaluate if a shale gas project has any impact on environment, compare the impacts before and after a shale gas development project, or the impacts of different projects.

Negotiating river ecosystems: Impact assessment and conflict mediation in the cases of hydro-power construction

International Nuclear Information System (INIS)

Karjalainen, Timo P.; Jaervikoski, Timo

2010-01-01

In this paper we discuss how the legitimacy of the impact assessment process is a key issue in conflict mediation in environmental impact assessment. We contrast two EIA cases in hydro-power generation plans made for the Ii River, Finland in different decades, and evaluate how impact assessment in these cases has contributed to the creation, mediation and resolution of conflicts. We focus on the elements of distributional and procedural justice that made the former EIA process more legitimate and consensual and the latter more conflictual. The results indicate that it is crucial for conflict mediation to include all the values and interests of the parties in the goal-setting process and in the definition and assessment of alternatives. The analysis also indicates that procedural justice is the most important to help the people and groups involved to accept the legitimacy of the impact assessment process: how different parties and their values and interests are recognized, and how participation and distribution of power are organized in an impact assessment process. It is confirmed in this article that SIA may act as a mediator or a forum providing a process through which competing knowledge claims, various values and interests can be discussed and linked to the proposed alternatives and interventions.

A probabilistic seismic risk assessment procedure for nuclear power plants: (II) Application

Science.gov (United States)

Huang, Y.-N.; Whittaker, A.S.; Luco, N.

2011-01-01

This paper presents the procedures and results of intensity- and time-based seismic risk assessments of a sample nuclear power plant (NPP) to demonstrate the risk-assessment methodology proposed in its companion paper. The intensity-based assessments include three sets of sensitivity studies to identify the impact of the following factors on the seismic vulnerability of the sample NPP, namely: (1) the description of fragility curves for primary and secondary components of NPPs, (2) the number of simulations of NPP response required for risk assessment, and (3) the correlation in responses between NPP components. The time-based assessment is performed as a series of intensity-based assessments. The studies illustrate the utility of the response-based fragility curves and the inclusion of the correlation in the responses of NPP components directly in the risk computation. ?? 2011 Published by Elsevier B.V.

The European Community Directive -- An Alternative Environmental Impact Assessment Procedure after Massey?

Science.gov (United States)

1993-09-30

competitive conditions, thereby directly affecting the functioning of the common market .’l B. Environmental Impact Assessment 1. Background The Preamble to the...of the conmon market ." Treaty of Rome, supra note 120, art. 100. ’"EC Directive, supra note 22, Preamble. 14Id. art. 1.2. 16Id. 51 member states...dairy products. (d) Brewing and malting. (e) Confectionery and syrup manufacture. (f) Installations for the slaughter of animals. 86 0 0 (g

Vulnerability Assessment for a Complex Structure Using Vibration Response Induced by Impact Load

International Nuclear Information System (INIS)

Park, Jeongwon; Park, Junhong; Koo, Man Hoi

2014-01-01

This work presents a vulnerability assessment procedure for a complex structure using vibration characteristics. The structural behavior of a three-dimensional framed structure subjected to impact forces was predicted using the spectral element method. The Timoshenko beam function was applied to simulate the impact wave propagations induced by a high-velocity projectile at relatively high frequencies. The interactions at the joints were analyzed for both flexural and longitudinal wave propagations. Simulations of the impact energy transfer through the entire structure were performed using the transient displacement and acceleration responses obtained from the frequency analysis. The kill probabilities of the crucial components for an operating system were calculated as a function of the predicted acceleration amplitudes according to the acceptable vibration levels. Following the proposed vulnerability assessment procedure, the vulnerable positions of a three-dimensional combat vehicle with high possibilities of damage generation of components by impact loading were identified from the estimated vibration responses

The impact of a medical procedure service on patient safety, procedure quality and resident training opportunities.

Science.gov (United States)

Tukey, Melissa H; Wiener, Renda Soylemez

2014-03-01

At some academic hospitals, medical procedure services are being developed to provide supervision for residents performing bedside procedures in hopes of improving patient safety and resident education. There is limited knowledge of the impact of such services on procedural complication rates and resident procedural training opportunities. To determine the impact of a medical procedure service (MPS) on patient safety and resident procedural training opportunities. Retrospective cohort analysis comparing characteristics and outcomes of procedures performed by the MPS versus the primary medical service. Consecutive adults admitted to internal medicine services at a large academic hospital who underwent a bedside medical procedure (central venous catheterization, thoracentesis, paracentesis, lumbar puncture) between 1 July 2010 and 31 December 2011. The primary outcome was a composite rate of major complications. Secondary outcomes included resident participation in bedside procedures and use of "best practice" safety process measures. We evaluated 1,707 bedside procedures (548 by the MPS, 1,159 by the primary services). There were no differences in the composite rate of major complications (1.6 % vs. 1.9 %, p = 0.71) or resident participation in bedside procedures (57.0 % vs. 54.3 %, p = 0.31) between the MPS and the primary services. Procedures performed by the MPS were more likely to be successfully completed (95.8 % vs. 92.8 %, p = 0.02) and to use best practice safety process measures, including use of ultrasound guidance when appropriate (96.8 % vs. 90.0 %, p = 0.0004), avoidance of femoral venous catheterization (89.5 vs. 82.7 %, p = 0.02) and involvement of attending physicians (99.3 % vs. 57.0 %, p < 0.0001). Although use of a MPS did not significantly affect the rate of major complications or resident opportunities for training in bedside procedures, it was associated with increased use of best practice safety process measures.

Fragility assessment method of Concrete Wall Subjected to Impact Loading

International Nuclear Information System (INIS)

Hahm, Daegi; Shin, Sang Shup; Choi, In-Kil

2014-01-01

These studies have been aimed to verify and ensure the safety of the targeted walls and structures especially in the viewpoint of the deterministic approach. However, recently, the regulation and the assessment of the safety of the nuclear power plants (NPPs) against to an aircraft impact are strongly encouraged to adopt a probabilistic approach, i.e., the probabilistic risk assessment of an aircraft impact. In Korea, research to develop aircraft impact risk quantification technology was initiated in 2012 by Korea Atomic Energy Research Institute (KAERI). In this paper, for the one example of the probabilistic safety assessment approach, a method to estimate the failure probability and fragility of concrete wall subjected to impact loading caused by missiles or engine parts of aircrafts will be introduced. This method and the corresponding results will be used for the total technical roadmap and the procedure to assess the aircraft impact risk (Fig.1). A method and corresponding results of the estimation of the failure probability and fragility for a concrete wall subjected to impact loadings caused by missiles or engine parts of aircrafts was introduced. The detailed information of the target concrete wall in NPP, and the example aircraft engine model is considered safeguard information (SGI), and is not contained in this paper

Integrating impact assessment and conflict management in urban planning: Experiences from Finland

International Nuclear Information System (INIS)

Peltonen, Lasse; Sairinen, Rauno

2010-01-01

The article examines the interlinkages between recent developments in conflict management and impact assessment procedures in the context of urban planning in Finland. It sets out by introducing the fields of impact assessment and conflict mediation. It then proceeds to discuss the development of impact assessment practices and the status of conflict mediation in Finnish land use planning. The case of Korteniitty infill development plan in Jyvaeskylae is used to demonstrate how the Finnish planning system operates in conflict situations - and how social impact assessment can contribute to managing planning conflicts. The authors ask how the processes of impact assessment contribute to conflict management. Based on the Finnish experience, it is argued that social impact assessment of land use plans can contribute to conflict management, especially in the absence of institutionalised conflict mediation processes. In addition, SIA may acquire features of conflict mediation, depending on extent and intensity of stakeholder participation in the process, and the quality of linkages it between knowledge production and decision-making. Simultaneously, conflict mediation practices and theoretical insights can inform the application of SIA to help it address land use conflicts more consciously.

Assessment of lightning impact frequency for process equipment

International Nuclear Information System (INIS)

Necci, Amos; Antonioni, Giacomo; Cozzani, Valerio; Krausmann, Elisabeth; Borghetti, Alberto; Nucci, Carlo Alberto

2014-01-01

Fires and explosions triggered by lightning strikes are among the most frequent Natech scenarios affecting the chemical and process industry. Although lightning hazard is well known, well accepted quantitative procedures to assess the contribution of accidents caused by lightning to industrial risk are still lacking. In the present study, a quantitative methodology for the assessment of the expected frequency of lightning capture by process equipment is presented. A specific model, based on Monte Carlo simulations, was developed to assess the capture frequency of lightning for equipment with a given geometry. The model allows the assessment of lay-out effects and the reduction of the capture probability due to the presence of other structures or equipment items. The results of the Monte Carlo simulations were also used to develop a simplified cell method allowing a straightforward assessment of the lightning impact probability in a quantitative risk assessment framework. The developed approach allows an in-depth analysis of the hazard due to lightning impact by identifying equipment items with the highest expected frequency of lightning impacts in a given lay-out. The model thus supplies useful data to approach the assessment of the quantitative contribution of lightning-triggered accidents to industrial risk. - Highlights: • A specific approach to storage tank lightning impact frequency calculation was developed. • The approach is suitable for the quantitative assessment of industrial risk due to lightning. • The models developed provide lightning capture frequency based on tank geometry. • Lay-out effects due to nearby structures are also accounted. • Capture frequencies may be as high as 10 −1 events/year for standalone unprotected tanks

On the development and use of farm models for policy impact assessment in the European Union – A review

NARCIS (Netherlands)

Reidsma, Pytrik; Janssen, Sander; Jansen, Jacques; Ittersum, van Martin K.

2018-01-01

Farm models are potentially relevant tools for policy impact assessment. Governments and international organizations use impact assessment (IA) as an ex-ante policy process and procedure to evaluate impacts of policy options as part of the introduction of new policies. IA is increasingly used. This

Reconsidering the risk assessment concept: Standardizing the impact description as a building block for vulnerability assessment

Directory of Open Access Journals (Sweden)

K. Hollenstein

2005-01-01

Full Text Available Risk assessments for natural hazards are becoming more widely used and accepted. Using an extended definition of risk, it becomes obvious that performant procedures for vulnerability assessments are vital for the success of the risk concept. However, there are large gaps in knowledge about vulnerability. To alleviate the situation, a conceptual extension of the scope of existing and new models is suggested. The basis of the suggested concept is a stadardization of the output of hazard assessments. This is achieved by defining states of the target objects that depend on the impact and at the same time affect the object's performance characteristics. The possible state variables can be related to a limited set of impact descriptors termed generic impact description interface. The concept suggests that both hazard and vulnerability assessment models are developed according to the specification of this interface, thus facilitating modularized risk assessments. Potential problems related to the application of the concept include acceptance issues and the lacking accuracy of transformation of outputs of existing models. Potential applications and simple examples for adapting existing models are briefly discussed.

Capacity assessment of concrete containment vessels subjected to aircraft impact

Energy Technology Data Exchange (ETDEWEB)

Andonov, Anton, E-mail: anton.andonov@mottmac.com; Kostov, Marin; Iliev, Alexander

2015-12-15

Highlights: • An approach to assess the containment capacity to aircraft impact via fragility curves is proposed. • Momentum over Area was defined as most suitable reference parameter to describe the aircraft load. • The effect of the impact induced damages on the containment pressure capacity has been studied. • The studied containment shows no reduction of the pressure capacity for the investigated scenarios. • The effectiveness of innovative protective structure against aircraft impact has been evaluated. - Abstract: The paper describes the procedure and the results from the assessment of the vulnerability of a generic pre-stressed containment structure subjected to a large commercial aircraft impact. Impacts of Boeing 737, Boeing 767 and Boeing 747 have been considered. The containment vulnerability is expressed by fragility curves based on the results of a number of nonlinear dynamic analyses. Three reference parameters have been considered as impact intensity measure in the fragility curve definition: peak impact force (PIF), peak impact pressure (PIP) and Momentum over Area (MoA). Conclusions on the most suitable reference parameter as well on the vulnerability of such containment vessels are drawn. The influence of the aircraft impact induced damages on the containment ultimate pressure capacity is also assessed and some preliminary conclusions on this are drawn. The paper also addresses a conceptual design of a protective structure able to decrease the containment vulnerability and provide a preliminary assessment of the applicability of such concept.

Capacity assessment of concrete containment vessels subjected to aircraft impact

International Nuclear Information System (INIS)

Andonov, Anton; Kostov, Marin; Iliev, Alexander

2015-01-01

Highlights: • An approach to assess the containment capacity to aircraft impact via fragility curves is proposed. • Momentum over Area was defined as most suitable reference parameter to describe the aircraft load. • The effect of the impact induced damages on the containment pressure capacity has been studied. • The studied containment shows no reduction of the pressure capacity for the investigated scenarios. • The effectiveness of innovative protective structure against aircraft impact has been evaluated. - Abstract: The paper describes the procedure and the results from the assessment of the vulnerability of a generic pre-stressed containment structure subjected to a large commercial aircraft impact. Impacts of Boeing 737, Boeing 767 and Boeing 747 have been considered. The containment vulnerability is expressed by fragility curves based on the results of a number of nonlinear dynamic analyses. Three reference parameters have been considered as impact intensity measure in the fragility curve definition: peak impact force (PIF), peak impact pressure (PIP) and Momentum over Area (MoA). Conclusions on the most suitable reference parameter as well on the vulnerability of such containment vessels are drawn. The influence of the aircraft impact induced damages on the containment ultimate pressure capacity is also assessed and some preliminary conclusions on this are drawn. The paper also addresses a conceptual design of a protective structure able to decrease the containment vulnerability and provide a preliminary assessment of the applicability of such concept.

Environmental impact assessment in regional administration - the province of Oulu as an example

International Nuclear Information System (INIS)

Toerttoe, H.; Kaakinen, E.; Alasaarela, E.

1992-01-01

The environmental impact assessment (EIA) procedure is concerned with the alternatives available in activities which profoundly affect the condition of our natural environment, built-up environment and society through given intermediate stages, the detrimental effects of these activities and the possibilities for reducing such effects. The procedure provides a comprehensive explanation of the above aspects and yields the necessary material for making the relevant decisions through well-organised negotiations between the parties involved. The majority of this material is gathered together in an environmental impact statement (EIS). The data can then be used for deciding on the implementation of individual projects. The research project 'Environmental Impact Assessment in Regional Administration - the Province of Oulu as an Example' is a part of the preparations being made by the Ministry of the Environment for introducing such an evaluation procedure for use in Finland. The primary aim of the project is to develop planning and cooperation procedures for use in regional administration that will allow evaluation of the environmental effects of various projects and activates and ensure that these effects can be evaluated and taken into consideration in a comprehensive manner at an early planning stage on the basis of existing procedures and legislation. The research, which takes the province of Oulu as an example, has involved close cooperation with the EIA '92 working group set up by the Ministry of the Environment, since the report of this working group provides a general framework for the evaluation of environmental effects

Patients exposure assessment for radiographic procedures in diagnostic radiology

International Nuclear Information System (INIS)

Arandjic, D.; Ciraj-Bjelac, O.; Stankovic, K.; Lazarevic, Dj.; Ciraj-Bjelac, O.)

2007-01-01

In this work the results of dose assessment for the most frequent radiographic procedures in diagnostic radiology are shown. Entrance surface doses were assessed for 7 radiographic procedures. Three hospitals, six x-ray units in total, were enrolled in investigation. Patient doses were estimated based on results of x-ray tube output measurements. Finally, doses were compared with Diagnostic reference level. Higher dose values were observed for chest examinations. In comparison with results from other countries, doses from this procedure in Serbia are significantly higher. Estimated doses for other procedures were well below Diagnostic reference levels [sr

Assessment of procedural skills in residents working in a research and training institute: An effort to ensure patient safety and quality control.

Science.gov (United States)

Kumari, Kamlesh; Samra, Tanvir; Naik, B Naveen; Saini, Vikas

2018-01-01

To ensure patient safety, it is important to regularly assess the knowledge and practical skills of anesthesia trainees. This study was conducted to evaluate the competency of the residents and the impact of various corrective measures in the form of didactic lectures and clinical skill demonstrations on the conduct of various procedural skills by the residents. Ninety-five junior residents were enrolled in this study. Assessment of competency of 1 st , 2 nd , and 3 rd year residents in performing various procedure skills of anesthesia was done in two stages using procedure specific checklist (PSC) and Global Rating Scales (GRSs). Preliminary results of the first assessment (Score 1) were discussed with the residents; deficiencies were identified and corrective measures suggested by didactic lectures and clinical skill demonstrations which were followed by a subsequent assessment after 3 months (Score 2). There was a statistically significant improvement in the PSC and GRS scores after corrective measures for all the procedural interventions studied. Percentage increase in scores was maximum in 1 st year (42.98 ± 6.62) followed by 2 nd year (34.62 ± 5.49) and minimum in 3 rd year residents (18.06 ± 3.69). The percentage increase of scores was almost similar for all subset of procedural skills; low, intermediate, and high skill anesthetic procedures. For assessment of procedural skills of residents, use of PSC and GRS scores should be incorporated and the same should be used to monitor the impact of various corrective measures (didactic lectures and clinical skill demonstrations) on the conduct of various procedural skills by the resident.

Environmental impact assessment as a complement of life cycle assessment. Case study: Upgrading of biogas.

Science.gov (United States)

Morero, Betzabet; Rodriguez, María B; Campanella, Enrique A

2015-08-01

This work presents a comparison between an environmental impact assessment (EIA) and a life cycle assessment (LCA) using a case study: upgrading of biogas. The upgrading of biogas is studied using three solvents: water, physical solvent and amine. The EIA follows the requirements of the legislation of Santa Fe Province (Argentina), and the LCA follows ISO 14040. The LCA results showed that water produces a minor impact in most of the considered categories whereas the high impact in the process with amines is the result of its high energy consumptions. The positive results obtained in the EIA (mainly associated with the cultural and socioeconomic components) make the project feasible and all the negative impacts can be mitigated by preventive and remedial measures. From the strengths and weaknesses of each tool, it is inferred that the EIA is a procedure that can complement the LCA. Copyright © 2015 Elsevier Ltd. All rights reserved.

Software quality assurance procedures for radioactive waste risk assessment codes

International Nuclear Information System (INIS)

Hill, I.; Mayer, J.

1990-01-01

This support study for the evaluation of the safety of geological disposal systems is aimed at identifying the requirements for software quality assurance procedures for radioactive waste risk assessment codes, and to recommend appropriate procedures. The research covers: (i) the analysis of existing procedures and definition of requirements; (ii) a case study of the use of some existing procedures; (iii) the definition and the implementation of procedures. The report is supported by appendices that give more detail on the procedures recommended. It is intended to provide ideas on the steps that should be taken to ensure the quality of the programs used for assessment of the safety case for radioactive waste repositories, and does not represent the introduction of wholly new ideas or techniques. The emphasis throughout is on procedures that will be easily implemented, rather than on the fully rigorous procedures that are required for some application areas. The study has concentrated on measures that will increase the confidence in repository performance assessments among the wider scientific/engineering community, and the lay public

Assessment in Counseling: A Guide to the Use of Psychological Assessment Procedures. Third Edition.

Science.gov (United States)

Hood, Albert B.; Johnson, Richard W.

This book presents information about various psychological assessment procedures that are specifically relevant for practicing counselors. It deals with the use of assessment procedures in the counseling process and emphasizes the selection, interpretation, and communication of psychological test results. The importance of integrating test results…

Health Impact Assessment Practice and Potential for Integration within Environmental Impact and Strategic Environmental Assessments in Italy

Science.gov (United States)

Linzalone, Nunzia; Assennato, Giorgio; Ballarini, Adele; Cadum, Ennio; Cirillo, Mario; Cori, Liliana; De Maio, Francesca; Musmeci, Loredana; Natali, Marinella; Rieti, Sabrina; Soggiu, Maria Eleonora; Bianchi, Fabrizio

2014-01-01

Avoiding or minimizing potential environmental impact is the driving idea behind protecting a population’s health via Environmental Impact Assessments (EIAs) and Strategic Environmental Assessments (SEAs). However, both are often carried out without any systematic approach. This paper describes the findings of a review of HIA, EIA and SEA experiences carried out by the authors, who act as institutional competent subjects at the national and regional levels in Italy. The analysis of how health is tackled in EIA and SEA procedures could support the definition of a protocol for the integration of HIA with EIA and SEA. Although EIA and SEA approaches include the aim of protecting health, significant technical and methodological gaps are present when assessing health systematically, and their basic principles regarding assessment are unsatisfactory for promoting and addressing healthcare concepts stated by the WHO. HIA is still poorly integrated into the decision-making process, screening and monitoring phases are only occasionally implemented, and operational details are not well-defined. The collaborative approach of institutions involved in environment and health is a core element in a systematic advancement toward supporting effective decisions and effective protection of the environment and health. At the Italian national level, the definition of guidelines and tools for HIA, also in relation with EIA and SEA, is of great interest. PMID:25493391

Improving L2 Reading Comprehension through Emotionalized Dynamic Assessment Procedures.

Science.gov (United States)

Abdolrezapour, Parisa

2017-06-01

The paper reports a study on an emotionally-loaded dynamic assessment procedure used with Iranian EFL learners. It focuses on the effect of using emotional intelligence characteristics (based on Goleman's framework) as a tool for motivating learners while performing reading tasks. The study with 50 intermediate learners aged 12-15 used three modalities: a control group, which was taught under institute's normal procedures; a comparison group, which received dynamic assessment (DA); and an experimental group, which received emotionalized dynamic assessment (EDA) procedures, in the form of an intervention focusing on characteristics of Goleman's emotional intelligence framework with the express purpose of inducing them to work with their emotions. Results showed that applying EDA procedures to reading assessment tasks made a difference in learners' level of performance in comparison to those who went through pure DA procedures who in turn performed significantly better than those who did not received DA in any form.

A procedure for the assessment of low frequency noise complaints.

Science.gov (United States)

Moorhouse, Andy T; Waddington, David C; Adams, Mags D

2009-09-01

The development and application of a procedure for the assessment of low frequency noise (LFN) complaints are described. The development of the assessment method included laboratory tests addressing low frequency hearing threshold and the effect on acceptability of fluctuation, and field measurements complemented with interview-based questionnaires. Environmental health departments then conducted a series of six trials with genuine "live" LFN complaints to test the workability and usefulness of the procedure. The procedure includes guidance notes and a pro-forma report with step-by-step instructions. It does not provide a prescriptive indicator of nuisance but rather gives a systematic procedure to help environmental health practitioners to form their own opinion. Examples of field measurements and application of the procedure are presented. The procedure and examples are likely to be of particular interest to environmental health practitioners involved in the assessment of LFN complaints.

Risk and environmental impact assessment: nuclear and environmental licensing interface

International Nuclear Information System (INIS)

Costa, Eduardo M.; Monteiro, Iara A.

1997-01-01

The main aims of this paper are the identification and discussion of interfaces and application of common concepts in the existing nuclear and environmental licensing procedures. Risk and impact assessment of nuclear electricity generation are two of these concepts which are discussed detail. The risk concept, which had initially focused on engineering projects, has been extended to many other areas of human activity. Risk resulting from the use of ionization radiation has been associated to the dose for the critical members of the public. Therefore, radiation protection applies basic dose limits which are established in national and international recommendations. These recommendations are increasing the emphasis to keep all the exposures to ionizing radiation as low as reasonable achievable, economical and social factors being taken into account. On the other hand, environmental impact assessment has been used as a tool in planning and decision-making processes, thus including environmental concern in the discussion of social and economical development strategies. This paper aims to discuss the association of these two concepts by presenting the procedures of control of radiological impact during normal operation of a nuclear power plant and the various forms of risk communication to the public in the case of events occurrence. (author). 13 refs

Environmental impact assessments and geological repositories for radioactive waste

International Nuclear Information System (INIS)

O'Sullivan, P.; McKirdy, B.; Askarieh, M.; Bond, A.; Russell, S.

1999-01-01

Since 1985 it has been obligatory that facilities in the European Union designed for the permanent storage or disposal of radioactive waste be assessed to determine their effects on the environment. This assessment must be undertaken in advance of any decision by national authorities to give consent for development work to proceed. Member States are given wide discretion on how the above requirements are implemented in practice, e.g. the relevant European Council Directives call for the results of the environmental assessment to be made available to the public before development consent is granted but the detailed arrangements for dissemination of such information and procedures for public consultation are determined by individual Member States. Although the Directives require an assessment of the direct and indirect effects of a project on human beings and on various elements of the natural environment, they are non-specific as to what particular impacts should be addressed, particularly as regards the effects of a project on human beings. Therefore, for example, each Member State may decide whether or not social, health and economic impacts should be included in the assessment. This paper discusses the above issues. It proposes a model approach to environmental impact assessment in the context of geological repositories, including the role of the assessment on the overall decision processes for repository development, the scope and content of the assessment report, and approaches to public involvement

A cadaveric procedural anatomy simulation course improves video-based assessment of operative performance.

Science.gov (United States)

Sharma, Gaurav; Aycart, Mario A; O'Mara, Lynne; Havens, Joaquim; Nehs, Matthew; Shimizu, Naomi; Smink, Douglas S; Gravereaux, Edwin; Gates, Jonathan D; Askari, Reza

2018-03-01

Inadequate anatomic knowledge has been cited as a major contributor to declining surgical resident operative competence. We analyzed the impact of a comprehensive, procedurally oriented cadaveric procedural anatomy dissection laboratory on the operative performance of surgery residents, hypothesizing that trainees' performance of surgical procedures would improve after such a dissection course. Midlevel general surgery residents (n = 9) participated in an 8 wk, 16-h surgery faculty-led procedurally oriented cadaver simulation course. Both before and after completion of the course, residents participated in a practical examination, in which they were randomized to perform one of nine Surgical Council on Resident Education-designated "essential" procedures. The procedures were recorded using wearable video technology. Videos were deidentified before evaluation by six faculty raters blinded to examinee and whether performances occurred before or after an examinee had taken the course. Raters used the validated Operative Performance Rating System and Objective Structured Assessment of Technical Skill scales. After the course residents had higher procedure-specific scores (median, 4.0 versus 2.4, P 4.0 versus 3.0, P = 0.006), respect for tissue (4.0 versus 3.0, P = 0.0004), time and motion (3.0 versus 2.0, P = 0.0007), operation flow (3.0 versus 2.0, P = 0.0005), procedural knowledge (4.0 versus 2.0, P = 0.0001), and overall performance scores (4.0 versus 2.0, P < 0.0001). Operative Performance Rating System and Objective Structured Assessment of Technical Skill scales averaged by number of items in each were also higher (3.2 versus 2.0, P = 0.0002 and 3.1 versus 2.2, P = 0.002, respectively). A cadaveric procedural anatomy simulation course covering a broad range of open general surgery procedures was associated with significant improvements in trainees' operative performance. Copyright © 2017 Elsevier Inc. All rights reserved.

A Role for Authority Supervision in Impact Assessment? Examples from Finnish EIA Reviews

Directory of Open Access Journals (Sweden)

Lovisa Solbär

2017-05-01

Full Text Available With the boom in mining in Fennoscandia, reconciliation of competing land use interests in governance procedures such as impact assessment has come to the fore. One of the functions that has been applied to varying degrees in national frameworks is supervision of the procedure by a responsible authority. This paper examines review statements issued in the context of mining project assessments in northern Finland – one of the countries implementing authority supervision. The study shows that third-party review may play a role in highlighting the importance of competing land use interest such as reindeer herding. Attention to such interests, however, remains limited by the application of spatial planning in the case and by consent processing, up until the end of the period examined. Among the lessons for impact assessment is the need for methodologies for accommodating anticipatory types of (practice-based and non-scientific information. Unless these types of sources are considered valid, the possibility of substantializing anticipation and finding solutions along those lines will be missed, with the risk of making things on the ground worse before the need for mitigation measures is comprehended in the face of materializing impacts.

Cumulative Impact Assessment: Approaching Environmental Capacity in Development Area Using Environmental Impact Assessment Information

Science.gov (United States)

Cho, N.; Lee, M. J.; Maeng, J. H.

2017-12-01

Environmental impact assessment estimates the impact of development as a business unit and establishes mitigation plan. If the development is done, its economic effects can spread to the nearby areas. So that various developments can be distributed at different time intervals. The impact of the new developments can be combined with existing environmental impacts and can have a larger impact. That is, Cumulative impact assessment is needed to consider the environmental capacity of the Nearby area. Cumulative impact assessments require policy tools such as environmental impact assessment information and cumulative impact estimation models. In Korea, environmental information (water quality, air quality, etc.) of the development site is measured for environmental impact assessment and monitored for a certain period (generally 5 years) after the project. In addition, by constructing the environmental information as a spatial database, it is possible to express the environmental impact on a regional basis spatially and to intuitively use it for development site selection. Utilizing a composite model of environmental impact assessment information and Remote Sensing data for cumulative impact estimation, That can be used as a policy decision support tool that provides quantitative information for development area management, such as time series effect and sprawl phenomenon.

Health impact assessment in multinationals: A case study of the Royal Dutch/Shell Group

International Nuclear Information System (INIS)

Birley, Martin

2005-01-01

Health impact assessment is part of the risk management process of multinational corporations/companies. Sexually transmitted infections, including HIV/AIDS, and the 'paradox of plenty' are used as examples of the challenges they face. The 'business case' for impact assessment is explained. The policies, procedures, standards, and activities used by Shell to manage such risks are described. An approach to capacity building and competency development is presented that applies to both company staff and external contractors

Residual stress effects in LMFBR fracture assessment procedures

International Nuclear Information System (INIS)

Hooton, D.G.

1984-01-01

Two post-yield fracture mechanics methods, which have been developed into fully detailed failure assessment procedures for ferritic structures, have been reviewed from the point of view of the manner in which as-welded residual stress effects are incorporated, and comparisons then made with finite element and theoretical models of centre-cracked plates containing residual/thermal stresses in the form of crack-driving force curves. Applying the procedures to austenitic structures, comparisons are made in terms of failure assessment curves and it is recommended that the preferred method for the prediction of critical crack sizes in LMFBR austenitic structures containing as-welded residual stresses is the CEGB-R6 procedure based on a flow stress defined at 3% strain in the parent plate. When the prediction of failure loads in such structures is required, it is suggested that the CEGB-R6 procedure be used with residual/thermal stresses factored to give a maximum total stress of flow stress magnitude

A procedure for safety assessment of components with cracks - Handbook

International Nuclear Information System (INIS)

Andersson, P.; Bergman, M.; Brickstad, B.; Dahlberg, L.; Nilsson, F.; Sattari-Far, I.

1996-01-01

In this handbook a procedure is described which can be used both for assessment of detected cracks or crack like defects or for defect tolerance analysis. The procedure can be used to calculate possible crack growth due to fatigue or stress corrosion and to calculate the reserve margin for failure due to fracture and plastic collapse. For ductile materials, the procedure gives the reserve margin for initiation of stable crack growth. Thus, an extra reserve margin, unknown to size, exists for failure in components made of ductile materials. The procedure was developed for operative use with the following objectives in mind: The procedure should be able to handle both linear and non-linear problems without any a priori division; The procedure shall ensure uniqueness of the safety assessment; The procedure should be well defined and easy to use; The conservatism of the procedure should be well validated; The handbook that documents the procedure should be so complete that for most assessments access to any other fracture mechanics literature should not be necessary. The method utilized is based on the R6-method developed at Nuclear Electric plc. This method can in principle be used for all metallic materials. It is, however, more extensively verified for steel alloys only. The method is not intended for use in temperatures where creep deformation is of importance. The first edition of the handbook was released in 1990 and the second in 1991. This third edition has been extensively revised. A Windows-based program (SACC) has been developed which can perform the assessments described in the book including calculation of crack growth due to stress corrosion and fatigue. 52 refs., 27 figs., 35 tabs

Structured Assessment Approach: a procedure for the assessment of fuel cycle safeguard systems

International Nuclear Information System (INIS)

Parziale, A.A.; Patenaude, C.J.; Renard, P.A.; Sacks, I.J.

1980-01-01

Lawrence Livermore National Laboratory has developed and tested for the United States Nuclear Regulatory Commission a procedure for the evaluation of Material Control and Accounting (MC and A) Systems at Nuclear Fuel Facilities. This procedure, called the Structured Assessment Approach, SAA, subjects the MC and A system at a facility to a series of increasingly sophisticated adversaries and strategies. A fully integrated version of the computer codes which assist the analyst in this assessment was made available in October, 1979. The concepts of the SAA and the results of the assessment of a hypothetical but typical facility are presented

Balance in scientific impact assessment: the EGU Awards Committe experience

Science.gov (United States)

Montanari, Alberto

2016-04-01

Evaluation of scientific impact is becoming an essential step all over the world for assigning academic positions, funding and recognition. Impact is generally assessed by means of objective bibliometric indicators which are frequently integrated with a subjective evaluation by one or more individuals. An essential requirement of impact assessment is to ensure balance across several potential discriminating factors, including gender, ethnics, culture, scientific field and many others. Scientific associations need to ensure balance in any step of their activity and in particular when electing their representatives, evaluating scientific contributions, reviewing papers and assigning awards. While ensuring balance is a strict necessity, how to get to target is still a matter of vivid debates. In fact, the context of science is very different with respect to the general context of society and the need for scientific associations to maintain confidentiality in their evaluation procedures makes the application of transparent procedures more complicated. This talk aims to present the experience and the efforts of the European Geosciences Union to ensure balance, with a particular focus on gender balance. Data and statistics will be presented in the attempt to provide constructive indications to get to the target of giving equal opportunities to researchers across gender, continents and ethnic groups. Science is a unifying discipline and balance will be vital to ensure that humans and our planet co-evolve sustainably.

Quality control and the substantive influence of environmental impact assessment in Finland

International Nuclear Information System (INIS)

Poeloenen, Ismo

2006-01-01

This paper focuses on the challenges concerning the quality assurance of environmental impact statements (EIS) in Finland and the European Union. Moreover, the linkage between environmental impact assessment and decision-making is examined from a legal point of view. In addition, the paper includes some comparative remarks concerning the content requirements of examination of alternatives. The study reveals that a significant problem of the Finnish EIA system is the lack of efficient access to a judicial procedure to challenge the quality and completeness of an EIS. Another pitfall is the fact that in certain permit procedures, environmental consideration is so limited that only a minor part of the EIA can be taken into account. In its current state, EIA legislation in the EU and in Finland does not guarantee that the assessment results filter into decision-making. From the national point of view, the shortcomings can be addressed by amending current legislation concerning licensing procedures so that authorities have the competence and the duty to take environmental matters widely into account in the permit consideration. At the European level, a legislative alternative could be to strengthen the substantive element of the EIA Directive (85/337/EEC). This would increase the weight of EIA related arguments in the national appellate procedures and contribute, in some cases significantly, to the substantive influence of EIA in decision-making

Impact of operator fatigue on endoscopy performance: implications for procedure scheduling.

LENUS (Irish Health Repository)

Harewood, Gavin C

2009-08-01

With increasing volumes of endoscopic procedures, endoscopists\\' workload has had to increase to meet this escalating demand. The aim of this study was to characterize the impact of endoscopist fatigue on quality of endoscopy performance by comparing outcomes based on chronological procedure order.

Experience and lessons from health impact assessment for human rights impact assessment.

Science.gov (United States)

Salcito, Kendyl; Utzinger, Jürg; Krieger, Gary R; Wielga, Mark; Singer, Burton H; Winkler, Mirko S; Weiss, Mitchell G

2015-09-16

As globalisation has opened remote parts of the world to foreign investment, global leaders at the United Nations and beyond have called on multinational companies to foresee and mitigate negative impacts on the communities surrounding their overseas operations. This movement towards corporate impact assessment began with a push for environmental and social inquiries. It has been followed by demands for more detailed assessments, including health and human rights. In the policy world the two have been joined as a right-to-health impact assessment. In the corporate world, the right-to-health approach fulfils neither managers' need to comprehensively understand impacts of a project, nor rightsholders' need to know that the full suite of their human rights will be safe from violation. Despite the limitations of a right-to-health tool for companies, integration of health into human rights provides numerous potential benefits to companies and the communities they affect. Here, a detailed health analysis through the human rights lens is carried out, drawing on a case study from the United Republic of Tanzania. This paper examines the positive and negative health and human rights impacts of a corporate operation in a low-income setting, as viewed through the human rights lens, considering observations on the added value of the approach. It explores the relationship between health impact assessment (HIA) and human rights impact assessment (HRIA). First, it considers the ways in which HIA, as a study directly concerned with human welfare, is a more appropriate guide than environmental or social impact assessment for evaluating human rights impacts. Second, it considers the contributions HRIA can make to HIA, by viewing determinants of health not as direct versus indirect, but as interrelated.

78 FR 20074 - Environmental Impact and Related Procedures

Science.gov (United States)

2013-04-03

... DEPARTMENT OF TRANSPORTATION Federal Highway Administration 23 CFR Part 771 Federal Transit Administration 49 CFR Part 622 [Docket No. FHWA-2013-0007] FHWA RIN 2125-AF48 FTA RIN 2132-AB05 Environmental Impact and Related Procedures Correction The correction that appeared on page 15925, Wednesday, March 13...

78 FR 15925 - Environmental Impact and Related Procedures

Science.gov (United States)

2013-03-13

... DEPARTMENT OF TRANSPORTATION Federal Highway Administration 23 CFR Part 771 Federal Transit Administration 49 CFR Part 622 [Docket No. FHWA-2012-2013] FHWA RIN 2125-AF48 FTA RIN 2132-AB05 Environmental Impact and Related Procedures Correction In proposed rule document 2013-4678 beginning on page 13609 in...

Psychological impact of prenatal diagnosis and post procedure ...

African Journals Online (AJOL)

Prenatal diagnosis is associated with psychological challenges, which may affect the response of women before, during or after the procedure, as well as their decision on the future of an affected pregnancy. This prospective study was to evaluate the psychological impact of prenatal diagnosis, factors that may be ...

Validity, reliability and support for implementation of independence-scaled procedural assessment in laparoscopic surgery.

Science.gov (United States)

Kramp, Kelvin H; van Det, Marc J; Veeger, Nic J G M; Pierie, Jean-Pierre E N

2016-06-01

There is no widely used method to evaluate procedure-specific laparoscopic skills. The first aim of this study was to develop a procedure-based assessment method. The second aim was to compare its validity, reliability and feasibility with currently available global rating scales (GRSs). An independence-scaled procedural assessment was created by linking the procedural key steps of the laparoscopic cholecystectomy to an independence scale. Subtitled and blinded videos of a novice, an intermediate and an almost competent trainee, were evaluated with GRSs (OSATS and GOALS) and the independence-scaled procedural assessment by seven surgeons, three senior trainees and six scrub nurses. Participants received a short introduction to the GRSs and independence-scaled procedural assessment before assessment. The validity was estimated with the Friedman and Wilcoxon test and the reliability with the intra-class correlation coefficient (ICC). A questionnaire was used to evaluate user opinion. Independence-scaled procedural assessment and GRS scores improved significantly with surgical experience (OSATS p = 0.001, GOALS p < 0.001, independence-scaled procedural assessment p < 0.001). The ICCs of the OSATS, GOALS and independence-scaled procedural assessment were 0.78, 0.74 and 0.84, respectively, among surgeons. The ICCs increased when the ratings of scrub nurses were added to those of the surgeons. The independence-scaled procedural assessment was not considered more of an administrative burden than the GRSs (p = 0.692). A procedural assessment created by combining procedural key steps to an independence scale is a valid, reliable and acceptable assessment instrument in surgery. In contrast to the GRSs, the reliability of the independence-scaled procedural assessment exceeded the threshold of 0.8, indicating that it can also be used for summative assessment. It furthermore seems that scrub nurses can assess the operative competence of surgical trainees.

Environmental impact assessments of a fifth nuclear power plant unit in Finland

International Nuclear Information System (INIS)

Aurela, Jorma; Koivisto, Katarina

2000-01-01

This paper presents the results of president questionnaires and media monitoring of press cuttings concerned with siting of the new fifth in a row Finnish NPP. Two years ago both Fortum Power and Heat Oy and Teollisuuden Voima Oy (TVO) launched their Environmental impact assessment (EIA) procedures of a new nuclear power unit in Finland. The EIA procedures were launched to investigate the environmental impacts of a fifth nuclear power plant which possibly will be built in Loviisa or at Olkiluoto. In Finland there are four operating NPP units, two in Loviisa (Fortum) and two in Eurajoki, Olkiluoto (TVO). In the EIA procedure citizens and various associations and authorities have an opportunity to express their views on the matters related to the project. The Ministry of Trade and Industry (MTI) as the coordination authority arranges the organisation of the EIA hearings and the collection of statements and opinions. The EIA procedure in Finland takes place in two stages. The first stage i.e. the EIA programme describes the project and presents the plan on how the environmental effects are investigated and assessed. In the second stage the actual assessment of the environmental effects of the project will be submitted. Both Fortum and Teollisuuden Voima Oy (TVO) launched in spring 1998 their EIA procedures. The main alternatives are the Loviisa 3 project includes two plant type alternatives. The size of the plant is between 1000 and 1700 MWe, and the extension project of the Olkiluoto NPP to build a NPP unit of about 1000-1500 MWe at Olkiluoto. The EIA reports were submitted to the MTI in August 1999 and after that they were on display for two months for opinions and statements

Development of assessment procedures at the CEGB's nuclear power training centre

International Nuclear Information System (INIS)

Chapman, C.R.; Harris, N.D.C.

1986-01-01

The work of a power station engineer can be considered under four aspects: technology, diagnosis action and communication. The development, validation and use of assessment procedures can successfully incorporate the same aspects. The purposes of assessment are reporting training achievement and giving feedback to course members and tutorial staff. The development of standardized procedures to produce, evaluate and mark assessments and to optimize feedback ensures objectivity and uniformity. This has been achieved at the Central Electricity Generating Board's Nuclear Power Training Centre by enlisting an educational consultant to provide guidance and assist in training the resident tutors in assessment procedures. (author)

Crowd-sourced assessment of surgical skills in cricothyrotomy procedure.

Science.gov (United States)

Aghdasi, Nava; Bly, Randall; White, Lee W; Hannaford, Blake; Moe, Kris; Lendvay, Thomas S

2015-06-15

Objective assessment of surgical skills is resource intensive and requires valuable time of expert surgeons. The goal of this study was to assess the ability of a large group of laypersons using a crowd-sourcing tool to grade a surgical procedure (cricothyrotomy) performed on a simulator. The grading included an assessment of the entire procedure by completing an objective assessment of technical skills survey. Two groups of graders were recruited as follows: (1) Amazon Mechanical Turk users and (2) three expert surgeons from University of Washington Department of Otolaryngology. Graders were presented with a video of participants performing the procedure on the simulator and were asked to grade the video using the objective assessment of technical skills questions. Mechanical Turk users were paid $0.50 for each completed survey. It took 10 h to obtain all responses from 30 Mechanical Turk users for 26 training participants (26 videos/tasks), whereas it took 60 d for three expert surgeons to complete the same 26 tasks. The assessment of surgical performance by a group (n = 30) of laypersons matched the assessment by a group (n = 3) of expert surgeons with a good level of agreement determined by Cronbach alpha coefficient = 0.83. We found crowd sourcing was an efficient, accurate, and inexpensive method for skills assessment with a good level of agreement to experts' grading. Copyright © 2015 Elsevier Inc. All rights reserved.

Development of Procedures for Assessing the Impact of Vocational Education Research and Development on Vocational Education (Project IMPACT). Volume 8--A Field Study of Predicting Impact of Research and Development Projects in Vocational and Technical Education.

Science.gov (United States)

Malhorta, Man Mohanlal

As part of Project IMPACT's effort to identify and develop procedures for complying with the impact requirements of Public Law 94-482, a field study was conducted to identify and validate variables and their order of importance in predicting and evaluating impact of research and development (R&D) projects in vocational and technical education.…

Impact assessment revisited

DEFF Research Database (Denmark)

Thiele, Jan; Kollmann, Johannes Christian; Markussen, Bo

2010-01-01

; and (4) the total invaded range is an inappropriate measure for quantifying regional impact because the habitat area available for invasion can vary markedly among invasive species. Mathematical models and empirical data using an invasive alien plant species (Heracleum mantegazzianum) indicate......The theoretical underpinnings of the assessment of invasive alien species impacts need to be improved. At present most approaches are unreliable to quantify impact at regional scales and do not allow for comparison of different invasive species. There are four basic problems that need...... and we discuss the quantification of the invaded range. These improvements are crucial for impact assessment with the overall aim of prioritizing management of invasive species....

Mutagenesis and teratogenesis as end points in health impact assessment

International Nuclear Information System (INIS)

Bender, M.A.

1976-01-01

The genetic and teratogenic effects of agents released to the environment as a consequence of energy production are exceedingly difficult to evaluate. Nevertheless, these effects on human health may be very costly in the context of cost-benefit analysis. In fact, the procedures required to limit mutagenic or teratogenic agents to the levels considered acceptable by regulatory bodies may constitute a major fraction of the cost of energy, especially where prudence dictates that a lack of empirical data requires extremely conservative regulations. Experience with ionizing radiation and with regulation of nuclear power installations illustrates the difficulty of genetic and teratogenic health impact assessment and the great uncertainties involved, as well as the influence of these impacts on the regulatory process and the consequent increased cost of power from this source. Data on genetic and teratogenic impacts on human health from chemical agents released to the environment by other energy technologies are much less complete, and, because of the large number of potentially active agents involved, it is evident that generic solutions to health impact assessment will be required to evaluate these energy alternatives

Environmental impact assessment report

Energy Technology Data Exchange (ETDEWEB)

Jung, K. J.; Paik, S. T.; Chung, U. S.; Jung, K. H.; Park, S. K.; Lee, D. G.; Kim, H. R.; Kim, J. K.; Yang, S. H.; Lee, B. J.; Kim, E. H.; Choi, K. S

2000-10-01

This report is the revised Environmental Impact Assessment Report which was made and submitted as one of the license documents for TRIGA Research Reactor D and D Project. The Environmental Impact Assessment Report includes introduction of decommissioning plan, status of reactors and environmental impact of surroundings. Also it was assessed and analyzed on radioactivity for environment, and the plan was established to minimize radioactive material release. Finally environmental monitoring plan was established to confirm whether contaminated or not from radioactivity during decommissioning period. According to the assessment results, the risk of excess exposure will be not on environment and public. The first Environmental Impact Assessment Report was submitted to the government for the license and reviewed by Korea Institute of Nuclear Safety. The first Report was revised including answers for the questions arising from review process.

Analysis of environmental impact assessment for large-scale X-ray medical equipments

International Nuclear Information System (INIS)

Fu Jin; Pei Chengkai

2011-01-01

Based on an Environmental Impact Assessment (EIA) project, this paper elaborates the basic analysis essentials of EIA for the sales project of large-scale X-ray medical equipment, and provides the analysis procedure of environmental impact and dose estimation method under normal and accident conditions. The key points of EIA for the sales project of large-scale X-ray medical equipment include the determination of pollution factor and management limit value according to the project's actual situation, the utilization of various methods of assessment and prediction such as analogy, actual measurement and calculation to analyze, monitor, calculate and predict the pollution during normal and accident condition. (authors)

Social Impact Assessment in Europe

DEFF Research Database (Denmark)

Larsen, Sanne Vammen; Hansen, Anne Merrild; Lyhne, Ivar

2015-01-01

Social impact assessment (SIA) is applied worldwide to assess social impacts of plans and projects. In Europe, directives on environmental assessment (EA) require attention to social impacts, however, there is a need to investigate the implementation in practise. To this end, we study three Danish...... are not suggested or are postponed and the geographical distribution of impacts assessed is biased towards including negative local impacts. We discuss the scope and handling of social impacts, and possible implications. Based on this, we conclude with the view that EA might do the job of handling social impacts...... cases, which are characterised by debates and conflicts on social issues. Analysis of the EA statements shows inclusion of a broad range of social impacts. However, the EAs do not fully match the concerns of the public, and social impacts are not always analysed in depth, mitigation measures...

A framework for combining social impact assessment and risk assessment

Energy Technology Data Exchange (ETDEWEB)

Mahmoudi, Hossein, E-mail: mahmoudi@uni-hohenheim.de [Department of Social Sciences in Agriculture, University of Hohenheim (Germany); Environmental Sciences Research Institute, Shahid Beheshti University, G.C. (Iran, Islamic Republic of); Renn, Ortwin [Department of Technology and Environmental Sociology (and DIALOGIK), University of Stuttgart (Germany); Vanclay, Frank [Department of Cultural Geography, Faculty of Spatial Sciences, University of Groningen, Groningen (Netherlands); Hoffmann, Volker [Department of Social Sciences in Agriculture, University of Hohenheim (Germany); Karami, Ezatollah [College of Agriculture, Shiraz University, Shiraz (Iran, Islamic Republic of)

2013-11-15

An increasing focus on integrative approaches is one of the current trends in impact assessment. There is potential to combine impact assessment with various other forms of assessment, such as risk assessment, to make impact assessment and the management of social risks more effective. We identify the common features of social impact assessment (SIA) and social risk assessment (SRA), and discuss the merits of a combined approach. A hybrid model combining SIA and SRA to form a new approach called, ‘risk and social impact assessment’ (RSIA) is introduced. RSIA expands the capacity of SIA to evaluate and manage the social impacts of risky projects such as nuclear energy as well as natural hazards and disasters such as droughts and floods. We outline the three stages of RSIA, namely: impact identification, impact assessment, and impact management. -- Highlights: • A hybrid model to combine SIA and SRA namely RSIA is proposed. • RSIA can provide the proper mechanism to assess social impacts of natural hazards. • RSIA can play the role of ex-post as well as ex-ante assessment. • For some complicated and sensitive cases like nuclear energy, conducting a RSIA is necessary.

A framework for combining social impact assessment and risk assessment

International Nuclear Information System (INIS)

Mahmoudi, Hossein; Renn, Ortwin; Vanclay, Frank; Hoffmann, Volker; Karami, Ezatollah

2013-01-01

An increasing focus on integrative approaches is one of the current trends in impact assessment. There is potential to combine impact assessment with various other forms of assessment, such as risk assessment, to make impact assessment and the management of social risks more effective. We identify the common features of social impact assessment (SIA) and social risk assessment (SRA), and discuss the merits of a combined approach. A hybrid model combining SIA and SRA to form a new approach called, ‘risk and social impact assessment’ (RSIA) is introduced. RSIA expands the capacity of SIA to evaluate and manage the social impacts of risky projects such as nuclear energy as well as natural hazards and disasters such as droughts and floods. We outline the three stages of RSIA, namely: impact identification, impact assessment, and impact management. -- Highlights: • A hybrid model to combine SIA and SRA namely RSIA is proposed. • RSIA can provide the proper mechanism to assess social impacts of natural hazards. • RSIA can play the role of ex-post as well as ex-ante assessment. • For some complicated and sensitive cases like nuclear energy, conducting a RSIA is necessary

Considering the normative, systemic and procedural dimensions in indicator-based sustainability assessments in agriculture

International Nuclear Information System (INIS)

Binder, Claudia R.; Feola, Giuseppe; Steinberger, Julia K.

2010-01-01

This paper develops a framework for evaluating sustainability assessment methods by separately analyzing their normative, systemic and procedural dimensions as suggested by Wiek and Binder [Wiek, A, Binder, C. Solution spaces for decision-making - a sustainability assessment tool for city-regions. Environ Impact Asses Rev 2005, 25: 589-608.]. The framework is then used to characterize indicator-based sustainability assessment methods in agriculture. For a long time, sustainability assessment in agriculture has focused mostly on environmental and technical issues, thus neglecting the economic and, above all, the social aspects of sustainability, the multi-functionality of agriculture and the applicability of the results. In response to these shortcomings, several integrative sustainability assessment methods have been developed for the agricultural sector. This paper reviews seven of these that represent the diversity of tools developed in this area. The reviewed assessment methods can be categorized into three types: (i) top-down farm assessment methods; (ii) top-down regional assessment methods with some stakeholder participation; (iii) bottom-up, integrated participatory or transdisciplinary methods with stakeholder participation throughout the process. The results readily show the trade-offs encountered when selecting an assessment method. A clear, standardized, top-down procedure allows for potentially benchmarking and comparing results across regions and sites. However, this comes at the cost of system specificity. As the top-down methods often have low stakeholder involvement, the application and implementation of the results might be difficult. Our analysis suggests that to include the aspects mentioned above in agricultural sustainability assessment, the bottom-up, integrated participatory or transdisciplinary methods are the most suitable ones.

Environmental impact assessment by means of a procedure based on fuzzy logic: A practical application

International Nuclear Information System (INIS)

Peche, Roberto; Rodriguez, Esther

2011-01-01

This study shows the practical application of the EIA method based on fuzzy logic proposed by the authors (Peche and Rodriguez, 2009) to a simplified case of study-the activity of a petrol station throughout its exploitation. The intensity (p 1 ), the extent (p 2 ) and the persistence (p 3 ) were the properties selected to describe the impacts and their respective assessment functions v-bar i =f(p-bar i ) were determined. The main actions (A) and potentially affected environmental factors (F) were selected. Every impact was identified by a pair A-F and the values of the three impact properties were estimated for each of them by means of triangular fuzzy numbers. Subsequently, the fuzzy estimation of every impact was carried out, the estimation of the impact A 1 -F 2 (V-bar 1 ) being explained in detail. Every impact was simultaneously represented by its corresponding generalised confidence interval and membership function. Since the membership functions of all impacts were similar to triangular fuzzy numbers, a triangular approach (TA) was used to describe every impact. A triangular approach coefficient (TAC) was introduced to quantify the similarity of each fuzzy number and its corresponding triangular approach, where TAC (V-bar ) element of (0, 1] and TAC being 1 when the fuzzy number is triangular. The TACs-ranging from 0.96 to 0.99-proved that TAs were valid in all cases. Next, the total positive and negative impacts-TV-bar + and TV-bar - were calculated and later, the fuzzy value of the total environmental impact TV-bar was determined from them. Finally, the defuzzification of TV-bar led to the punctual impact estimator TV (1) = -88.50 and its corresponding uncertainty interval [δ l (TV-bar),δ r (TV-bar)]=[6.52,6.96], which represent the total value of the EI. In conclusion, the EIA method enabled the integration of heterogeneous impacts, which exerted influence on environmental factors of a very diverse nature in very different ways, into a global impact

Sustainability impact assessment to improve food security of smallholders in Tanzania

International Nuclear Information System (INIS)

Schindler, Jana; Graef, Frieder; König, Hannes Jochen; Mchau, Devotha; Saidia, Paul; Sieber, Stefan

2016-01-01

The objective of this paper was to assess the sustainability impacts of planned agricultural development interventions, so called upgrading strategies (UPS), to enhance food security and to identify what advantages and risks are assessed from the farmer's point of view in regards to social life, the economy and the environment. We developed a participatory methodological procedure that links food security and sustainable development. Farmers in four different case study villages in rural Tanzania chose their priority UPS. For these UPS, they assessed the impacts on locally relevant food security criteria. The positive impacts identified were mainly attributed to increased agricultural production and its related positive impacts such as increased income and improved access to necessary means to diversify the diet. However, several risks of certain UPS were also indicated by farmers, such as increased workload, high maintenance costs, higher competition among farmers, loss of traditional knowledge and social conflicts. We discussed the strong interdependence of socio-economic and environmental criteria to improve food security for small-scale farmers and analysed several trade-offs in regards to UPS choices and food security criteria. We also identified and discussed the advantages and challenges of our methodological approach. In conclusion, the participatory impact assessment on the farmer level allowed a locally specific analysis of the various positive and negative impacts of UPS on social life, the economy and the environment. We emphasize that only a development approach that considers social, economic and environmental challenges simultaneously can enhance food security.

Evolution of the discharge impact assessments in the French regulation framework

International Nuclear Information System (INIS)

Chartier, M.; Despres, A.; Guillaume, R.; Plazanic, P.; Supervil, S.; Hubert, P.

2000-01-01

The French regulation on discharge authorisation procedures has been modified in 1995. The French authorities are thus committed to re-examined the discharge authorisations for all French nuclear installations. A new examination of discharge authorisations is in progress. The authorisations to discharge liquid and gaseous effluents had been granted at the time of the development of the nuclear installations (power plants, laboratories, facilities) according to a procedure defined in 1976. The recommendations of the ICRP expressed in the publication n deg 60, endorsed for the main part of them by the 1996 European, modified the concept of > for discharges, inter alia with an increased stress on optimisation. This evolution is consistent with the French low which does not recognise the right to pollute but defines a regime of authorisations which are always revocable. Consequently, the French authorities committed themselves to reductions of discharge limits as low as possible, at economically affordable cost. Since 1976, the evolutions of the principles of radiation protection for populations and of the French regulation together with the experience of 25 years of operations yielded significant changes of the approach of radiological impact assessments used in the regulation framework. This paper discuss and illustrate these changes: 1. Differences between the situation in 1976 (installations were planned) and now (most installations have operated since several years or tens of years) are first put forward: discharged activities, compositions of the effluents, variations of the discharges and their grounds are now better understood; techniques to reduce discharges have been developed. The opportunities in terms of discharge reductions and accuracy of radiological impact assessment are underlined. 2. Main characteristics of the bases of the radiological impact assessments used in the French regulation framework are then described: identification of existing reference

Analysis and assessment of environmental impacts of small hydro power plant in Slovakia

Science.gov (United States)

Zeleňáková, M.; Fijko, R.; Remeňáková, I.

2017-10-01

Environmental impact assessment (EIA) is an important process that, prior to approval of the investment plan, can provide a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to apply a specific methodology for the analysis and evaluation of the environmental impacts of selected constructions, namely, small hydro power plant, using matrix of impacts. This analysis method is intended not only to increase the clarity and precision of the evaluation process, but also to align it with the requirements of the environmental impact assessment system. This modification should improve the reliability of the environmental impact assessment, and could moreover also be applied to other infrastructure projects. Comparison of alternatives and designation of the optimal variant are implemented based on selected criteria that objectively describe the characteristic lines of the planned alternatives of activity and their impact on the environment. The use of proper EIA procedures can help the decision-makers to formulate proper activities based on qualified decisions. The designed project in Spišské Bystré, Slovakia is used as a case study to clarify and exemplify the methodology and techniques.

Assessment of the MPACT Resonance Data Generation Procedure

Energy Technology Data Exchange (ETDEWEB)

Kim, Kang Seog [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Williams, Mark L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2016-12-26

Currently, heterogeneous models are being used to generate resonance self-shielded cross-section tables as a function of background cross sections for important nuclides such as ²³⁵U and ²³⁸U by performing the CENTRM (Continuous Energy Transport Model) slowing down calculation with the MOC (Method of Characteristics) spatial discretization and ESSM (Embedded Self-Shielding Method) calculations to obtain background cross sections. And then the resonance self-shielded cross section tables are converted into subgroup data which are to be used in estimating problem-dependent self-shielded cross sections in MPACT (Michigan Parallel Characteristics Transport Code). Although this procedure has been developed and thus resonance data have been generated and validated by benchmark calculations, assessment has never been performed to review if the resonance data are properly generated by the procedure and utilized in MPACT. This study focuses on assessing the procedure and a proper use in MPACT.

Procedures for health risk assessment in Europe

NARCIS (Netherlands)

Seeley, M.R.; Tonner-Navarro, L.E.; Beck, B.D.; Deskin, R.; Feron, V.J.; Johanson, G.; Bolt, H.M.

2001-01-01

This report compares cancer classification systems, health risk assessment approaches, and procedures used for establishing occupational exposure limits (OELs), in various European countries and scientific organizations. The objectives were to highlight and compare key aspects of these processes and

Using the Entrustable Professional Activities Framework in the Assessment of Procedural Skills.

Science.gov (United States)

Pugh, Debra; Cavalcanti, Rodrigo B; Halman, Samantha; Ma, Irene W Y; Mylopoulos, Maria; Shanks, David; Stroud, Lynfa

2017-04-01

The entrustable professional activity (EPA) framework has been identified as a useful approach to assessment in competency-based education. To apply an EPA framework for assessment, essential skills necessary for entrustment to occur must first be identified. Using an EPA framework, our study sought to (1) define the essential skills required for entrustment for 7 bedside procedures expected of graduates of Canadian internal medicine (IM) residency programs, and (2) develop rubrics for the assessment of these procedural skills. An initial list of essential skills was defined for each procedural EPA by focus groups of experts at 4 academic centers using the nominal group technique. These lists were subsequently vetted by representatives from all Canadian IM training programs through a web-based survey. Consensus (more than 80% agreement) about inclusion of each item was sought using a modified Delphi exercise. Qualitative survey data were analyzed using a framework approach to inform final assessment rubrics for each procedure. Initial lists of essential skills for procedural EPAs ranged from 10 to 24 items. A total of 111 experts completed the national survey. After 2 iterations, consensus was reached on all items. Following qualitative analysis, final rubrics were created, which included 6 to 10 items per procedure. These EPA-based assessment rubrics represent a national consensus by Canadian IM clinician educators. They provide a practical guide for the assessment of procedural skills in a competency-based education model, and a robust foundation for future research on their implementation and evaluation.

Analysis of environmental impact assessment (EIA) system in Turkey.

Science.gov (United States)

Coşkun, Aynur Aydın; Turker, Ozhan

2011-04-01

The Environmental Impact Assessment (EIA) System, which embodies the "prevention principle" of the environmental law, is an important tool for environmental protection. This tool has a private importance for Turkey since it is a developing country, and it entered the Turkish law in 1983 with the Environmental Law. Besides, the EIA Regulation, which shows the application principles, became effective in 1993. Because Turkey is a candidate for European Union (EU), the EIA Regulation has been changed due to the EU compliance procedure, and its latest version became valid in 2008. This study aims to emphasize The EIA system in Turkey to supervise the efficiency of this procedure and point the success level. In the introduction part, general EIA concept, its importance, and some notations are mentioned. Following that, the legislation, which builds the EIA system, has been analyzed starting from the 1982 Turkish Constitution. Then, the legislation rules are explained due to the basic steps of the EIA procedure. In order to shed light upon the application, the EIA final decisions given until today, the results, and their distributions to the industries are assessed. In the final part of the study, a SWOT analysis is made to mention the weaknesses, strengths, opportunities, and threats of the EIA system in Turkey.

A procedure for NEPA assessment of selenium hazards associated with mining.

Science.gov (United States)

Lemly, A Dennis

2007-02-01

This paper gives step-by-step instructions for assessing aquatic selenium hazards associated with mining. The procedure was developed to provide the U.S. Forest Service with a proactive capability for determining the risk of selenium pollution when it reviews mine permit applications in accordance with the National Environmental Policy Act (NEPA). The procedural framework is constructed in a decision-tree format in order to guide users through the various steps, provide a logical sequence for completing individual tasks, and identify key decision points. There are five major components designed to gather information on operational parameters of the proposed mine as well as key aspects of the physical, chemical, and biological environment surrounding it--geological assessment, mine operation assessment, hydrological assessment, biological assessment, and hazard assessment. Validation tests conducted at three mines where selenium pollution has occurred confirmed that the procedure will accurately predict ecological risks. In each case, it correctly identified and quantified selenium hazard, and indicated the steps needed to reduce this hazard to an acceptable level. By utilizing the procedure, NEPA workers can be confident in their ability to understand the risk of aquatic selenium pollution and take appropriate action. Although the procedure was developed for the Forest Service it should also be useful to other federal land management agencies that conduct NEPA assessments, as well as regulatory agencies responsible for issuing coal mining permits under the authority of the Surface Mining Control and Reclamation Act (SMCRA) and associated Section 401 water quality certification under the Clean Water Act. Mining companies will also benefit from the application of this procedure because priority selenium sources can be identified in relation to specific mine operating parameters. The procedure will reveal the point(s) at which there is a need to modify operating

A framework for combining social impact assessment and risk assessment

NARCIS (Netherlands)

Mahmoudi, Hossein; Renn, Ortwin; Vanclay, Frank; Hoffmann, Volker; Karami, Ezatollah

An increasing focus on integrative approaches is one of the current trends in impact assessment. There is potential to combine impact assessment with various other forms of assessment, such as risk assessment, to make impact assessment and the management of social risks more effective. We identify

A framework for combining social impact assessment and risk assessment

NARCIS (Netherlands)

Mahmoudi, Hossein; Renn, Ortwin; Vanclay, Frank; Hoffmann, Volker; Karami, Ezatollah

2013-01-01

An increasing focus on integrative approaches is one of the current trends in impact assessment. There is potential to combine impact assessment with various other forms of assessment, such as risk assessment, to make impact assessment and the management of social risks more effective. We identify

Determining procedures for simulation-based training in radiology: a nationwide needs assessment.

Science.gov (United States)

Nayahangan, Leizl Joy; Nielsen, Kristina Rue; Albrecht-Beste, Elisabeth; Bachmann Nielsen, Michael; Paltved, Charlotte; Lindorff-Larsen, Karen Gilboe; Nielsen, Bjørn Ulrik; Konge, Lars

2018-01-09

New training modalities such as simulation are widely accepted in radiology; however, development of effective simulation-based training programs is challenging. They are often unstructured and based on convenience or coincidence. The study objective was to perform a nationwide needs assessment to identify and prioritize technical procedures that should be included in a simulation-based curriculum. A needs assessment using the Delphi method was completed among 91 key leaders in radiology. Round 1 identified technical procedures that radiologists should learn. Round 2 explored frequency of procedure, number of radiologists performing the procedure, risk and/or discomfort for patients, and feasibility for simulation. Round 3 was elimination and prioritization of procedures. Response rates were 67 %, 70 % and 66 %, respectively. In Round 1, 22 technical procedures were included. Round 2 resulted in pre-prioritization of procedures. In round 3, 13 procedures were included in the final prioritized list. The three highly prioritized procedures were ultrasound-guided (US) histological biopsy and fine-needle aspiration, US-guided needle puncture and catheter drainage, and basic abdominal ultrasound. A needs assessment identified and prioritized 13 technical procedures to include in a simulation-based curriculum. The list may be used as guide for development of training programs. • Simulation-based training can supplement training on patients in radiology. • Development of simulation-based training should follow a structured approach. • The CAMES Needs Assessment Formula explores needs for simulation training. • A national Delphi study identified and prioritized procedures suitable for simulation training. • The prioritized list serves as guide for development of courses in radiology.

Methods for assessing the socioeconomic impacts of large-scale resource developments: implications for nuclear repository siting

International Nuclear Information System (INIS)

Murdock, S.H.; Leistritz, F.L.

1983-03-01

An overview of the major methods presently available for assessing the socioeconomic impacts of large-scale resource developments and includes discussion of the implications and applications of such methods for nuclear-waste-repository siting are provided. The report: (1) summarizes conceptual approaches underlying, and methodological alternatives for, the conduct of impact assessments in each substantive area, and then enumerates advantages and disadvantages of each alternative; (2) describes factors related to the impact-assessment process, impact events, and the characteristics of rural areas that affect the magnitude and distribution of impacts and the assessment of impacts in each area; (3) provides a detailed review of those methodologies actually used in impact assessment for each area, describes advantages and problems encountered in the use of each method, and identifies the frequency of use and the general level of acceptance of each technique; and (4) summarizes the implications of each area of projection for the repository-siting process, the applicability of the methods for each area to the special and standard features of repositories, and makes general recommendations concerning specific methods and procedures that should be incorporated in assessments for siting areas

High-temperature flaw assessment procedure

International Nuclear Information System (INIS)

Ruggles, M.B.; Takahashi, Y.; Ainsworth, R.A.

1991-08-01

Described is the background work performed jointly by the Electric Power Research Institute in the United States, the Central Research Institute of Electric Power Industry in Japan and Nuclear Electric plc in the United Kingdom with the purpose of developing a high-temperature flaw assessment procedure for reactor components. Existing creep-fatigue crack-growth models are reviewed, and the most promising methods are identified. Sources of material data are outlined, and results of the fundamental deformation and crack-growth tests are discussed. Results of subcritical crack-growth exploratory tests, creep-fatigue crack-growth tests under repeated thermal transient conditions, and exploratory failure tests are presented and contrasted with the analytical modeling. Crack-growth assessment methods are presented and applied to a typical liquid-metal reactor component. The research activities presented herein served as a foundation for the Flaw Assessment Guide for High-Temperature Reactor Components Subjected to Creep-Fatigue Loading published separately. 30 refs., 108 figs., 13 tabs

DMM assessments of attachment and adaptation: Procedures, validity and utility.

Science.gov (United States)

Farnfield, Steve; Hautamäki, Airi; Nørbech, Peder; Sahhar, Nicola

2010-07-01

This article gives a brief over view of the Dynamic-Maturational Model of attachment and adaptation (DMM; Crittenden, 2008) together with the various DMM assessments of attachment that have been developed for specific stages of development. Each assessment is discussed in terms of procedure, outcomes, validity, advantages and limitations, comparable procedures and areas for further research and validation. The aims are twofold: to provide an introduction to DMM theory and its application that underlie the articles in this issue of CCPP; and to provide researchers and clinicians with a guide to DMM assessments.

Procedure for the assessment of material control and accounting systems

International Nuclear Information System (INIS)

Parziale, A.A.; Sacks, I.J.

1979-01-01

For the United States Nuclear Regulatory Commission, a procedure was developed and tested for the evaluation of Material Control and Accounting (MC and A) Systems at nuclear fuel facilities. This procedure, called the Structured Assessment Approach, SAA, subjects the MC and A system at a facility to a series of increasingly sophisticated adversaries and strategies. A fully integrated version of the computer codes which assist the analyst in this assessment will become available in October 1979. The concepts of the SAA and the results of the assessment of a hypothetical but typical facility are presented

Assessment of radiological properties of wastes from urban decontamination procedures

International Nuclear Information System (INIS)

Da Silva, D.N.G.; Guimarães, J.R.D.; Rochedo, E.R.R.; Rochedo, P.R.R.; De Luca, C.

2015-01-01

One important activity associated to urban areas contaminated from accidental releases to the atmosphere of nuclear power plants is the management of radioactive wastes generated from decontamination procedures. This include the collection, conditioning, packing, transport and temporary/final disposition. The final destination is defined usually through a political decision. Thus, transport of packed radioactive wastes shall depend on decisions not just under the scope of radiological protection issues. However, the simulations performed to assess doses for the public and decontamination workers allows the estimate of radiological aspects related to the waste generated and these characteristics may be included in a multi-criteria decision tool aiming to support, under the radiological protection point of view, the decision-making process on post-emergency procedures. Important information to decision makers are the type, amount and activity concentration of wastes. This work describes the procedures to be included in the urban area model to account for the assessment of qualitative and quantitative description of wastes. The results will allow the classification of different procedures according to predefined criteria that shall then feed the multi-criteria assessment tool, currently under development, considering basic radiological protection aspects of wastes generated by the different available cleanup procedures on typical tropical urban environments. (authors)

Sustainability impact assessment to improve food security of smallholders in Tanzania

Energy Technology Data Exchange (ETDEWEB)

Schindler, Jana, E-mail: jana.schindler@zalf.de [Leibniz Centre for Agricultural Landscape Research (ZALF), Institute of Land Use Systems, Eberswalder Straße 84, 15374 Müncheberg (Germany); Humboldt Universität zu Berlin, Faculty of Agriculture and Horticulture, Invalidenstr. 42, 10099 Berlin (Germany); Graef, Frieder, E-mail: graef@zalf.de [Leibniz Centre for Agricultural Landscape Research (ZALF), Institute of Land Use Systems, Eberswalder Straße 84, 15374 Müncheberg (Germany); König, Hannes Jochen, E-mail: hkoenig@zalf.de [Leibniz Centre for Agricultural Landscape Research (ZALF), Institute of Land Use Systems, Eberswalder Straße 84, 15374 Müncheberg (Germany); Mchau, Devotha, E-mail: dvtmchau@yahoo.com [Agricultural Research Institute (ARI Hombolo/Makutupora), P. O. Box 1676, Dodoma (Tanzania, United Republic of); Saidia, Paul, E-mail: saidiapaul@gmail.com [Sokoine University of Agriculture (SUA) Morogoro, Department of Crop Science and Production, P O. Box 3005, Morogoro (Tanzania, United Republic of); Sieber, Stefan, E-mail: stefan.sieber@zalf.de [Leibniz Centre for Agricultural Landscape Research (ZALF), Institute of Socio-Economics, Eberswalder Straße 84, 15374 Müncheberg (Germany)

2016-09-15

The objective of this paper was to assess the sustainability impacts of planned agricultural development interventions, so called upgrading strategies (UPS), to enhance food security and to identify what advantages and risks are assessed from the farmer's point of view in regards to social life, the economy and the environment. We developed a participatory methodological procedure that links food security and sustainable development. Farmers in four different case study villages in rural Tanzania chose their priority UPS. For these UPS, they assessed the impacts on locally relevant food security criteria. The positive impacts identified were mainly attributed to increased agricultural production and its related positive impacts such as increased income and improved access to necessary means to diversify the diet. However, several risks of certain UPS were also indicated by farmers, such as increased workload, high maintenance costs, higher competition among farmers, loss of traditional knowledge and social conflicts. We discussed the strong interdependence of socio-economic and environmental criteria to improve food security for small-scale farmers and analysed several trade-offs in regards to UPS choices and food security criteria. We also identified and discussed the advantages and challenges of our methodological approach. In conclusion, the participatory impact assessment on the farmer level allowed a locally specific analysis of the various positive and negative impacts of UPS on social life, the economy and the environment. We emphasize that only a development approach that considers social, economic and environmental challenges simultaneously can enhance food security.

Sense-making and Impact Assessment

DEFF Research Database (Denmark)

Lyhne, Ivar

The poster integrates knowledge about how we make sense of situations into SEA methodology to strengthen the staging of impact assessments and the process of scoping impacts.......The poster integrates knowledge about how we make sense of situations into SEA methodology to strengthen the staging of impact assessments and the process of scoping impacts....

Impact of gastrectomy procedural complexity on surgical outcomes and hospital comparisons.

Science.gov (United States)

Mohanty, Sanjay; Paruch, Jennifer; Bilimoria, Karl Y; Cohen, Mark; Strong, Vivian E; Weber, Sharon M

2015-08-01

Most risk adjustment approaches adjust for patient comorbidities and the primary procedure. However, procedures done at the same time as the index case may increase operative risk and merit inclusion in adjustment models for fair hospital comparisons. Our objectives were to evaluate the impact of surgical complexity on postoperative outcomes and hospital comparisons in gastric cancer surgery. Patients who underwent gastric resection for cancer were identified from a large clinical dataset. Procedure complexity was characterized using secondary procedure CPT codes and work relative value units (RVUs). Regression models were developed to evaluate the association between complexity variables and outcomes. The impact of complexity adjustment on model performance and hospital comparisons was examined. Among 3,467 patients who underwent gastrectomy for adenocarcinoma, 2,171 operations were distal and 1,296 total. A secondary procedure was reported for 33% of distal gastrectomies and 59% of total gastrectomies. Six of 10 secondary procedures were associated with adverse outcomes. For example, patients who underwent a synchronous bowel resection had a higher risk of mortality (odds ratio [OR], 2.14; 95% CI, 1.07-4.29) and reoperation (OR, 2.09; 95% CI, 1.26-3.47). Model performance was slightly better for nearly all outcomes with complexity adjustment (mortality c-statistics: standard model, 0.853; secondary procedure model, 0.858; RVU model, 0.855). Hospital ranking did not change substantially after complexity adjustment. Surgical complexity variables are associated with adverse outcomes in gastrectomy, but complexity adjustment does not affect hospital rankings appreciably. Copyright © 2015 Elsevier Inc. All rights reserved.

A method proposal for cumulative environmental impact assessment based on the landscape vulnerability evaluation

International Nuclear Information System (INIS)

Pavlickova, Katarina; Vyskupova, Monika

2015-01-01

Cumulative environmental impact assessment deals with the occasional use in practical application of environmental impact assessment process. The main reasons are the difficulty of cumulative impact identification caused by lack of data, inability to measure the intensity and spatial effect of all types of impacts and the uncertainty of their future evolution. This work presents a method proposal to predict cumulative impacts on the basis of landscape vulnerability evaluation. For this purpose, qualitative assessment of landscape ecological stability is conducted and major vulnerability indicators of environmental and socio-economic receptors are specified and valuated. Potential cumulative impacts and the overall impact significance are predicted quantitatively in modified Argonne multiple matrixes while considering the vulnerability of affected landscape receptors and the significance of impacts identified individually. The method was employed in the concrete environmental impact assessment process conducted in Slovakia. The results obtained in this case study reflect that this methodology is simple to apply, valid for all types of impacts and projects, inexpensive and not time-consuming. The objectivity of the partial methods used in this procedure is improved by quantitative landscape ecological stability evaluation, assignment of weights to vulnerability indicators based on the detailed characteristics of affected factors, and grading impact significance. - Highlights: • This paper suggests a method proposal for cumulative impact prediction. • The method includes landscape vulnerability evaluation. • The vulnerability of affected receptors is determined by their sensitivity. • This method can increase the objectivity of impact prediction in the EIA process

The role of science in environmental impact assessment: process and procedure versus purpose in the development of theory

International Nuclear Information System (INIS)

Cashmore, Matthew

2004-01-01

Increasing emphasis has been placed in recent years on development of the theory of Environmental Impact Assessment (EIA), primarily as a consequence of increasing recognition that the theoretical basis of 'state-of-the-art' EIA is inadequately developed and detailed. This study reviews consideration given in the research literature to the role of science in EIA in order to identify implicit theories. It is suggested that there are two main interpretations of the role of science in EIA (EIA as applied science and EIA as civic science) and five distinct models are identified within these paradigms. These models appear to be based predominantly on existing philosophies of science (such as positivism or relativism) and simplistic and ill-defined conceptions of the purposes of EIA. A broad model is proposed for the advancement of theory regarding the role of science in EIA which emphasises conceptual consideration and empirical investigation of the purposes, and hence outcomes, of EIA and the causal processes utilised to achieve these purposes. The model necessitates a reorientation of the research agenda, away from process and procedure to focus on substantive purposes, and this will require more integrative and connective research than has been commonplace in the past. The EIA research agenda must evolve and mature if this globally significant decision tool is to fulfil its potential

Impact of Procedural Specialty on Maternity Leave and Career Satisfaction Among Female Physicians.

Science.gov (United States)

Scully, Rebecca E; Davids, Jennifer S; Melnitchouk, Nelya

2017-08-01

The aim of this study was to perform a large-scale, national survey of physician mothers to define the personal, professional, and financial impact of maternity leave and its relationship to career satisfaction for female physicians in procedural and nonprocedural fields. Little is known about the impact of maternity leave on early career female physicians or how childbearing affects career satisfaction. A nationwide sample of physician mothers completed a 45-question anonymous, secure, online questionnaire regarding the impact of pregnancy and childbearing. One thousand five hundred forty-one respondents were attending physicians during their most recent pregnancy and 393 (25.5%) practiced in a procedural field. Overall, 609 (52.9%) reported losing over $10,000 in income during leave with no significant difference between procedural and nonprocedural fields. Maternity leave was included in only 28.9% of female physicians' most recent contracts. Proceduralists were more likely to report negative impact on referrals by maternity leave [odds ratio (OR) 1.78, 95% confidence interval (95% CI) 1.28-2.47, P = 0.001], a requirement to complete missed shifts (OR 3.04, 95% CI 2.12-4.36, P maternity leave and report high rates of career dissatisfaction, particularly those in procedural specialties. Given these findings, improved family leave policies may help improve career satisfaction for female physicians.

Sustainable Development Impacts of NAMAs: An integrated approach to assessment of co-benefits based on experience with the CDM

DEFF Research Database (Denmark)

Olsen, Karen Holm

to assess the SD impacts of NAMAs. This paper argues for a new integrated approach to asses NAMAs' SD impacts that consists of SD indicators, procedures for stakeholder involvement and safeguards against negative impacts. The argument is based on a review of experience with the CDM’s contribution to SD...... and a comparison of similarities and differences between NAMAs and CDM. Five elements of a new approach towards assessment of NAMAs SD impacts are suggested based on emerging approaches and methodologies for monitoring, reporting and verification (MRV) of greenhouse gas reductions and SD impacts of NAMAs....

Procedure on the Impact Characteristic Test for the One-sided and Thru-grid Spacer Grid

International Nuclear Information System (INIS)

Yoon, Kyung Ho; Kim, Jae Yong; Lee, Kang Hee; Song, Kee Nam

2006-09-01

In order to perform the one-sided and the through-grid impact tests for a new developed spacer grid, the drop type impact test machines were established. The dynamic impact test is to get some basic data for accident analysis such as impact strength, stiffness, and coefficient of the restitution. Furthermore, these developed test methods and procedures will be qualified standard for increasing the reliability of the test results. Chapter 2 provides an introduction to the test facilities and instrumentations. Chapter 3 describes on how spacer grid and the single span fuel assembly specimen will be prepared. In addition to this, how to set up these testing machines. Chapter 4 illustrates detail test procedure on how to acquire impact signal of the two kinds of the specimen. Chapter 5 deals with signal processing and analysis for the test data. Finally, chapter 6 summarise the overall test procedure and the test method

ENVIRONMENTAL IMPACT ASSESSMENT AND MONITORING ...

African Journals Online (AJOL)

protect the environment, it is imperative to conduct environmental impact assessment ... Ethiopia enacted the Environmental Impact Assessment Proclamation in 2002 ... flora, fauna, soil, air, water, climate, natural or cultural heritage, other.

Procedure for the assessment of material control and accounting systems

International Nuclear Information System (INIS)

Maimoni, A.; Sacks, I.; Cleland, L.

1978-01-01

The current status of the LLL program for MC and A system assessment is reviewed. Particular emphasis is given to the assessment procedure and results. The integrated approach we have taken includes many of the functions normally assigned to physical security. Deceit and tampering are explicitly considered. The results of such a detailed assessment include a systematic identification of adversary targets; the most vulnerable portions of the safeguards system; the number and type of adversaries required, in collusion, to fail the system; and the conditional probabilities of safeguard system failure for a variety of assumptions. The assessment procedure was demonstrated by analyzing a prototype fuel cycle facility, the Test Bed. We believe our methodology will be useful to the NRC as a means of performing detailed, objective assessments. The nuclear industry also should find it valuable as a design tool

Construct validation of teacher portfolio assessment : Procedures for improving teacher competence assessment illustrated by teaching students research skills

NARCIS (Netherlands)

Schaaf, M.F. van der

2005-01-01

The study aims to design and test procedures for teacher portfolio assessments. What are suitable procedures to assess teachers' competencies in developing students' research skills? We first searched into the tasks teachers have in teaching students research skills and the competencies needed to

Change Agents & Impact Assessment

DEFF Research Database (Denmark)

Kørnøv, Lone; Larsen, Sanne Vammen; Hansen, Anne Merrild

2010-01-01

One of the challenges facing impact assessment is finding ways to work in research and practice that allow appropriate action and critical interrogation og action to enable and support sustainable change.......One of the challenges facing impact assessment is finding ways to work in research and practice that allow appropriate action and critical interrogation og action to enable and support sustainable change....

Do single-use medical devices containing biopolymers reduce the environmental impacts of surgical procedures compared with their plastic equivalents?

Science.gov (United States)

Unger, Scott R; Hottle, Troy A; Hobbs, Shakira R; Thiel, Cassandra L; Campion, Nicole; Bilec, Melissa M; Landis, Amy E

2017-01-01

Background While petroleum-based plastics are extensively used in health care, recent developments in biopolymer manufacturing have created new opportunities for increased integration of biopolymers into medical products, devices and services. This study compared the environmental impacts of single-use disposable devices with increased biopolymer content versus typically manufactured devices in hysterectomy. Methods A comparative life cycle assessment of single-use disposable medical products containing plastic(s) versus the same single-use medical devices with biopolymers substituted for plastic(s) at Magee-Women's Hospital (Magee) in Pittsburgh, PA and the products used in four types of hysterectomies that contained plastics potentially suitable for biopolymer substitution. Magee is a 360-bed teaching hospital, which performs approximately 1400 hysterectomies annually. Results There are life cycle environmental impact tradeoffs when substituting biopolymers for petroplastics in procedures such as hysterectomies. The substitution of biopolymers for petroleum-based plastics increased smog-related impacts by approximately 900% for laparoscopic and robotic hysterectomies, and increased ozone depletion-related impacts by approximately 125% for laparoscopic and robotic hysterectomies. Conversely, biopolymers reduced life cycle human health impacts, acidification and cumulative energy demand for the four hysterectomy procedures. The integration of biopolymers into medical products is correlated with reductions in carcinogenic impacts, non-carcinogenic impacts and respiratory effects. However, the significant agricultural inputs associated with manufacturing biopolymers exacerbate environmental impacts of products and devices made using biopolymers. Conclusions The integration of biopolymers into medical products is correlated with reductions in carcinogenic impacts, non-carcinogenic impacts and respiratory effects; however, the significant agricultural inputs associated

Contextualized personality: traditional and new assessment procedures.

Science.gov (United States)

Heller, Daniel; Watson, David; Komar, Jennifer; Min, Ji-A; Perunovic, Wei Qi Elaine

2007-12-01

We describe our ongoing program of research related to the assessment of contextualized personality, focusing on social roles and cultural cues as contextual factors. First, we present our research employing the traditional assessment approach, wherein participants are asked to rate explicitly their personality across several different roles. We argue that this hypothetical approach is potentially susceptible to the influence of stereotypes, social desirability, and demand characteristics. We therefore describe the development of three novel and subtle assessment procedures that are based on obtaining online self-representations that are activated while occupying a specific context. Finally, the strengths and limitations of all four approaches, as well as directions for future research in the study of contextualized personality, are discussed.

Modifications of Probabilistic Safety Assessment-1 Nuclear Power Plant Dukovany based upon new version of Emergency Operating Procedures

International Nuclear Information System (INIS)

Aldorf, R.

1997-01-01

In the frame of 'living Probabilistic Safety Assessment-1 Nuclear Power Plant Dukovany Project' being performed by Nuclear Research Institute Rez during 1997 is planned to reflect on Probabilistic Safety Assessment-1 basis on impact of Emergency Response Guidelines (as one particular event from the list of other modifications) on Plant Safety. Following highlights help to orient the reader in main general aspects, findings and issues of the work that currently continues on. Older results of Probabilistic Safety Assessment-1 Nuclear Power Plant Dukovany have revealed that human behaviour during accident progression scenarios represent one of the most important aspects in plant safety. Current effort of Nuclear Power Plants Dukovany (Czech Republic) and Bohunice (Slovak Republic) is focussed on development of qualitatively new symptom-based Emergency Operating Procedures called Emergency Response Guidelines Supplier - Westinghouse Energy Systems Europe, Brussels works in cooperation with teams of specialist from both Nuclear Power Plants. In the frame of 'living Probabilistic Safety Assessment-1 Nuclear Power Plant Dukovany Project' being performed by Nuclear Research Institute Rez during 1997 is planned to prove on Probabilistic Safety Assessment -1 basis an expected - positive impact of Emergency Response Guidelines on Plant Safety, Since this contract is currently still in progress, it is possible to release only preliminary conclusions and observations. Emergency Response Guidelines compare to original Emergency Operating Procedures substantially reduce uncertainty of general human behaviour during plant response to an accident process. It is possible to conclude that from the current scope Probabilistic Safety Assessment Dukovany point of view (until core damage), Emergency Response Guidelines represent adequately wide basis for mitigating any initiating event

Impact of a Video Intervention for Rural Peruvian Women With Cervical Neoplasia Before Loop Excisional Procedures.

Science.gov (United States)

Ferris, Daron G; Condorhuaman, Wendy Shulay Guevara; Waller, Jennifer; Lilienthal, Anneliese

2015-07-01

Indigenous Peruvian women have very high rates of cervical cancer. This study assessed the impact of an educational video on impoverished rural Peruvian women seeking loop excision surgery. Women completed baseline, postvideo and postsurgery questionnaires that assessed knowledge and attitudes about the procedure. Differences between groups were examined using repeated measures analysis of variance. Women who watched the video were significantly more calm (2.6, 2.6, and 2.3, respectively; P = 0.04), relaxed (2.5, 2.5, and 2.1, respectively; P = 0.02), and content (3.4, 3.4, and 2.4, respectively, P < 0.01) at postvideo and postsurgery assessments compared with mean results at the baseline assessment. The same women were also significantly more tense (2.5, 2.0, and 2.0, respectively; P = 0.01), upset (1.6, 1.1, and 1.1, respectively; P = 0.01), and worried (3.0, 2.0, and 2.0, respectively; P = 0.01) at baseline compared with postvideo and postsurgery results. Approximately 93% of women believed that other women scheduled to have loop excision surgery should also watch the video. Dissemination of culturally sensitive video information minimizes adverse emotional responses associated with loop excision procedures before surgery. Such an intervention quickly improves the psychological well-being of women eventually subjected to surgical management of cervical neoplasia.

Fostering EFL learners’ autonomy in light of portfolio assessment: Exploring the potential impact of gender

Directory of Open Access Journals (Sweden)

Mahmood Hashemian

2013-07-01

Full Text Available The purpose of this study was to investigate the impact of portfolio assessment as a process-oriented mechanism on the autonomy of Iranian advanced EFL learners. A particular concern was to examine the potential effect of gender on portfolio assessment by taking the learners’ writing ability into account. The participants were 80 male and female advanced EFL learners to whom the Learner Autonomy Questionnaire (Kashefian, 2002 was administered to check their homogeneity prior to the study in terms of autonomy; a truncated form of a TOEFL test was also given to the participants to assess their language proficiency. The participants were then randomly divided into 4 groups: 2 experimental groups (20 females in class A and 20 males in class B and 2 control groups (20 females in class C and 20 males in class D. The portfolio assessment was integrated into the experimental groups to explore whether and to what extent their autonomy might enhance and also to investigate the possible effect of gender on portfolio assessment in writing ability. The portfolio assessment was based on the classroom portfolio model adopted from Hamp-Lyons and Condon (2000, consisting of 3 procedures: collection, selection, and reflection. In contrast, the control groups received the traditional assessment of writing. The data were analyzed using 2 independent samples t tests, mean, and the effect size. The results showed that the portfolio procedures considerably improved the autonomy of the participants. Also, gender had no impact on portfolio assessment.

High-temperature flaw assessment procedure

International Nuclear Information System (INIS)

Ruggles, M.B.; Takahashi, Y.; Ainsworth, R.A.

1989-08-01

The current program represents a joint effort between the Electric Power Research Institute (EPRI) in the USA, the Central Research Institute of Electric Power Industry (CRIEPI) in Japan, and the Central Electricity Generating Board (CEGB) in the UK. The goal is to develop an interim high-temperature flaw assessment procedure for high-temperature reactor components. This is to be accomplished through exploratory experimental and analytical studies of high-temperature crack growth. The state-of-the-art assessment and the fracture mechanics database for both types 304 and 316 stainless steels, completed in 1988, serve as a foundation for the present work. Work in the three participating organizations is progressing roughly on schedule. Results to-date are presented in this document. Fundamental tests results are discussed in Section 2. Section 3 focuses on results of exploratory subcritical crack growth tests. Progress in subcritical crack growth modeling is reported in Section 4. Exploratory failure tests are outlined in Section 5. 21 refs., 70 figs., 7 tabs

Probabilistic Impact Assessment of Domestic Rainwater Harvesting in Urban Slums: West Africa Case Study

Science.gov (United States)

Cowden, J. R.; Watkins, D. W.; Mihelcic, J. R.; Fry, L. M.

2007-12-01

Urban populations now exceed rural populations worldwide, creating unique challenges in providing basic services, especially in developing countries where informal or illegal settlements grow in peri-urban areas. West Africa is an acute example of the problems created by rapid urban growth, with high levels of urban poverty and low water and sanitation access rates. Although considerable effort has been made in providing improved water access and urban services to slum communities, research indicates that clean water access rates are not keeping up with urbanization rates in several areas of the world and that rapidly growing slum communities are beginning to overwhelm many prior water improvements projects. In the face of these challenges, domestic rainwater harvesting is proposed as a technologically appropriate and economically viable option for enhancing water supplies to urban slum households. However, assessing the reliability, potential health impacts, and overall cost-effectiveness of these systems on a regional level is difficult for several reasons. First, long daily rainfall records are not readily available in much of the developing world, including many regions of sub-Saharan Africa. Second, significant uncertainties exist in the relevant cost, water use, and health data. Third, to estimate the potential future impacts at the regional scale, various global change scenarios should be investigated. Finally, in addition to these technical challenges, there is also a need to develop relatively simple and transparent assessment methods for informing policy makers. A procedure is presented for assessment of domestic rainwater harvesting systems using a combination of scenario, sensitivity, and trade-off analyses. Using data from West Africa, simple stochastic weather models are developed to generate rainfall sequences for the region, which are then used to estimate the reliability of providing a range of per capita water supplies. Next, a procedure is

Assessing mental workload and situation awareness in the evaluation of computerized procedures in the main control room

Energy Technology Data Exchange (ETDEWEB)

Yang, Chih-Wei, E-mail: yangcw@iner.gov.tw [Institute of Nuclear Energy Research, 1000, Wenhua Rd., Jiaan Village, Longtan Township, Taoyuan County 32546, Taiwan (China); Yang, Li-Chen; Cheng, Tsung-Chieh [Institute of Nuclear Energy Research, 1000, Wenhua Rd., Jiaan Village, Longtan Township, Taoyuan County 32546, Taiwan (China); Jou, Yung-Tsan; Chiou, Shian-Wei [Department of Industrial Engineering, Chung-Yuan Christian University, 200, Chung Pei Rd., Chung-Li 32023, Taiwan (China)

2012-09-15

Highlights: Black-Right-Pointing-Pointer This study investigates procedure types' effects on operators' performance. Black-Right-Pointing-Pointer The computer-based procedure is suggested to be implemented in the main control room. Black-Right-Pointing-Pointer The computer-based procedure brings lowest mental workload. Black-Right-Pointing-Pointer And it also generates fewer error of omission, and the highest situation awareness. Black-Right-Pointing-Pointer The shift supervisor has the highest workload and the lowest situation awareness. - Abstract: Computerized procedure (CP) system has been developed in nuclear power plant (NPP) instrumentation and control (I and C) system. The system may include normal operating procedures (OPs), abnormal operating procedures (AOPs), alarm response procedures (ARPs), surveillance test procedures (STPs) and/or emergency operating procedures (EOPs). While there are many ways to evaluate computerized procedures design, the user's mental workload and situation awareness (SA) are particularly important considerations in the supervisory control of safety-critical systems. Users' mental workload and situation awareness may be influenced by human factor issues relating to computerized procedures, e.g., level of automation, dealing with (partially) unavailable I and C, switching to back-up system (e.g., paper-based procedures). Some of the positive impacts of CPs on operator performance include the following: tasks can be performed more quickly; overall workload can be reduced; cognitive workload can be minimized; fewer errors may be made in transitioning through or between procedures. However, various challenges have also been identified with CP systems. These should be addressed in the design and implementation of CPs where they are applicable. For example, narrower 'field of view' provided by CP systems than with paper-based procedures could reduce crew communications and crewmember awareness of the

Assessing mental workload and situation awareness in the evaluation of computerized procedures in the main control room

International Nuclear Information System (INIS)

Yang, Chih-Wei; Yang, Li-Chen; Cheng, Tsung-Chieh; Jou, Yung-Tsan; Chiou, Shian-Wei

2012-01-01

Highlights: ► This study investigates procedure types’ effects on operators’ performance. ► The computer-based procedure is suggested to be implemented in the main control room. ► The computer-based procedure brings lowest mental workload. ► And it also generates fewer error of omission, and the highest situation awareness. ► The shift supervisor has the highest workload and the lowest situation awareness. - Abstract: Computerized procedure (CP) system has been developed in nuclear power plant (NPP) instrumentation and control (I and C) system. The system may include normal operating procedures (OPs), abnormal operating procedures (AOPs), alarm response procedures (ARPs), surveillance test procedures (STPs) and/or emergency operating procedures (EOPs). While there are many ways to evaluate computerized procedures design, the user's mental workload and situation awareness (SA) are particularly important considerations in the supervisory control of safety-critical systems. Users’ mental workload and situation awareness may be influenced by human factor issues relating to computerized procedures, e.g., level of automation, dealing with (partially) unavailable I and C, switching to back-up system (e.g., paper-based procedures). Some of the positive impacts of CPs on operator performance include the following: tasks can be performed more quickly; overall workload can be reduced; cognitive workload can be minimized; fewer errors may be made in transitioning through or between procedures. However, various challenges have also been identified with CP systems. These should be addressed in the design and implementation of CPs where they are applicable. For example, narrower “field of view” provided by CP systems than with paper-based procedures could reduce crew communications and crewmember awareness of the status and progress through the procedure. Based on a human factors experiment in which each participant monitored and controlled multiple simulated

The assessment of impact on nuclear power plant structures in the United Kingdom

International Nuclear Information System (INIS)

Fullard, K.; Baum, M.R.

1991-01-01

Impact research in the United Kingdom has embraced a wide range of topics during the last fifteen years and advice has been provided in the form of guidelines for use in safety assessments and design studies. It is now the intention to produce a comprehensive Impact Assessment Procedure encompassing the definition of loading, whipping pipe effects and the response of steel and concrete targets. This paper is restricted to introducing the methods used for characterising missiles from pressurised vessels and for determining the impact damage produced in concrete targets. Considerable reliance has been placed on the interpretation of experimental data and guidance is therefore limited by the availability of such data. This paper indicates the extent to which advice can be given and the issues which still need further attention. An example is given of the use of the methods for characterising missiles from a cylindrical pressure vessel. (orig.)

Setting technical standards for visual assessment procedures

Science.gov (United States)

Kenneth H. Craik; Nickolaus R. Feimer

1979-01-01

Under the impetus of recent legislative and administrative mandates concerning analysis and management of the landscape, governmental agencies are being called upon to adopt or develop visual resource and impact assessment (VRIA) systems. A variety of techniques that combine methods of psychological assessment and landscape analysis to serve these purposes is being...

Structural assessment procedure of corroding submarine gas pipelines using on-line inspection data

International Nuclear Information System (INIS)

Nordin Yahaya

2000-01-01

This paper presents 'the alternative approach of overall procedure in the assessment of corroded pipelines using data gathered by the on-line inspection device. The methodology adopts a generalised approach of analysing pipeline inspection data and a prediction of the structural reliability due to the deteriorating corrosion environment. The whole assessment methodology is divided into four separate stages; 1 to IV. Stages 1 and 11 are the initial procedure prior to the actual analysis of the inspection data. The scope of this paper is concerted into the procedure to be taken in Stage 111 where the stage is sub-divided into 3 major steps; Part A, B and C. These procedures are Part A (statistical and probabilistic analysis of the inspection data) and Part B (the application of extreme value statistics) and C (reliability assessment). Stage IV (risk assessment) is the final step in the procedure where the consequences of failure are evaluated. The proposed risk-based assessment procedure is more systematic and reliable to account for a huge amount of collected data usually obtained in an on-line inspection using the intelligent devices. The outcomes of this risk-based methodology can be very useful in the decision-making process by the operation management. This in turn will produce an efficient inspection, repair and maintenance program and enhanced the optimised return in investment. (author)

Environmental impact assessment of fish farm hatcheries ...

African Journals Online (AJOL)

Environmental impact assessment of fish farm hatcheries management in lower ... Environmental impact assessments were taken to determine the causes of ... Of significance of impact assessment were activities like air, traffic, noise, had ...

Best approach to impact assessment is to use empirically based or simulation models to forecast impacts. Environmental Sciences Division Publication No. 1538

International Nuclear Information System (INIS)

Christensen, S.W.

1980-01-01

This paper advocates the utility of mathematical models, as contrasted with statistical procedures and processional judgment, for assessing environmental impacts. While it would be desirable to use statistical tests to detect and estimate impacts, this is generally difficult or impossible to do, even with existing sources of impact. Empirical modeling, supported by statistical analyses when possible, is proffered as the logical alternative. Next, for purposes of forecasting impacts, the use of models as opposed to professional judgment or experience is considered. The conclusion is reached that, while models cannot answer all of the relevant questions, they can be used effectively and can address problems that are beyond the reach of statistical methods

Developments in Social Impact Assessment

NARCIS (Netherlands)

Vanclay, Frank

2014-01-01

Along with environmental impact assessment, social impact assessment (SIA) has its origins in the 1970s and has developed from being a tool to meet regulatory requirements, to a discipline that seeks to contribute proactively to better project and policy development and to enhance the wellbeing of

23 CFR 630.1008 - State-level processes and procedures.

Science.gov (United States)

2010-04-01

..., data and information resources, training, and periodic evaluation enable a systematic approach for... management procedures. States should develop and implement systematic procedures to assess work zone impacts... resources that are necessary to support these activities. (d) Training. States shall require that personnel...

Environmental impact assessment - a selected bibliography

International Nuclear Information System (INIS)

Lawson, W.J.

1989-01-01

This bibliography of literature relevant to the environmental impact assessment process is essentially a list of material dealing with the environmental impact assessment process held by Griffith University Library. The list is however well supplemented with citations of material not held in the Griffith University Library. Some economic and social impact assessment citations have been included in the bibliography, as the the environmental impact assessment concept has been interpreted very broadly. The citations are arranged according to broad subject areas, such as methodology, critical reviews, social impacts etc. Citations in each of these subject areas, which are listed in the table of contents, are identified by prefixes which are given in parentheses before the subjects headings. Within each subject area the citations are arragend in alphabetic author sequence

40 CFR 227.22 - Assessment of impact.

Science.gov (United States)

2010-07-01

... FOR THE EVALUATION OF PERMIT APPLICATIONS FOR OCEAN DUMPING OF MATERIALS Impact of the Proposed Dumping on Other Uses of the Ocean § 227.22 Assessment of impact. The assessment of impact on other uses... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Assessment of impact. 227.22 Section...

Dynamic Assessment of Writing: The Impact of Implicit/Explicit Mediations on L2 Learners' Internalization of Writing Skills and Strategies

Science.gov (United States)

Alavi, Sayyed Mohammad; Taghizadeh, Mahboubeh

2014-01-01

Dynamic assessment is a procedure in which development is simultaneously assessed and improved with regard to the individual's or group's Zone of Proximal Development (ZPD; Lantolf & Poehner, 2004). This study aimed to follow dynamic assessment and investigate the impact of three types of implicit and explicit feedback on the essay writing of…

Development of a tool to support holistic generic assessment of clinical procedure skills.

Science.gov (United States)

McKinley, Robert K; Strand, Janice; Gray, Tracey; Schuwirth, Lambert; Alun-Jones, Tom; Miller, Helen

2008-06-01

The challenges of maintaining comprehensive banks of valid checklists make context-specific checklists for assessment of clinical procedural skills problematic. This paper reports the development of a tool which supports generic holistic assessment of clinical procedural skills. We carried out a literature review, focus groups and non-participant observation of assessments with interview of participants, participant evaluation of a pilot objective structured clinical examination (OSCE), a national modified Delphi study with prior definitions of consensus and an OSCE. Participants were volunteers from a large acute teaching trust, a teaching primary care trust and a national sample of National Health Service staff. Results In total, 86 students, trainees and staff took part in the focus groups, observation of assessments and pilot OSCE, 252 in the Delphi study and 46 candidates and 50 assessors in the final OSCE. We developed a prototype tool with 5 broad categories amongst which were distributed 38 component competencies. There was > 70% agreement (our prior definition of consensus) at the first round of the Delphi study for inclusion of all categories and themes and no consensus for inclusion of additional categories or themes. Generalisability was 0.76. An OSCE based on the instrument has a predicted reliability of 0.79 with 12 stations and 1 assessor per station or 10 stations and 2 assessors per station. This clinical procedural skills assessment tool enables reliable assessment and has content and face validity for the assessment of clinical procedural skills. We have designated it the Leicester Clinical Procedure Assessment Tool (LCAT).

Reconstruction of railroads at Klaipéda da National Seaport: Local Health Impact Assessment Case in Lithuania

Directory of Open Access Journals (Sweden)

Ingrida Zurlytè

2007-09-01

Full Text Available Background: Introduction of health impact assessment (HIA as a national legal requirement for planned economic activity projects in 2002 and the further development of related procedures and methodological requirements has boosted the number of HIAs carried out both as an integrated part of environmental impact assessment (EIA procedures as well as an independent activity. Most of HIAs have been conduct for local projects. The HIA for the reconstruction of the southern section of the railroads in Klaip da National Seaport is one of the local HIAs in Lithuania carried out as an independent procedure. Methods: The HIA for the reconstruction of the southern section of the railroads in Klaipda National Seaport was carried out following the national legal procedure for the cases not foreseen in the Law on Environmental Impact Assessment of Planned Economic Activity and the national HIA methodological regulations. The HIA included a literature review, analysis of related technical documentation, data on existing and estimated air pollution and environmental noise levels and possible health consequences, analysis of local demographic and health statistics; interviews with the residents living in proximity of the planned activity, analysis of public complaints on existing activities at Klaip da National Seaport, site visit and round table discussions with the proponent of the planned activity, planning company and representatives of the public health authority. The standard or intermediate type of perspective HIA was applied. Results: The HIA report has pointed out noise, vibration, ambient air pollution, psychological factors as related to possible negative impact on health of residents living in the mostly exposed locations. Interviews with inhabitants living in proximity of the planned activity have shown that majority of them knew nothing about the reconstruction plans. Recommendations were provided in the report how to minimise

Impact of workplace based assessment on doctors' education and performance: a systematic review.

Science.gov (United States)

Miller, Alice; Archer, Julian

2010-09-24

To investigate the literature for evidence that workplace based assessment affects doctors' education and performance. Systematic review. The primary data sources were the databases Journals@Ovid, Medline, Embase, CINAHL, PsycINFO, and ERIC. Evidence based reviews (Bandolier, Cochrane Library, DARE, HTA Database, and NHS EED) were accessed and searched via the Health Information Resources website. Reference lists of relevant studies and bibliographies of review articles were also searched. Review methods Studies of any design that attempted to evaluate either the educational impact of workplace based assessment, or the effect of workplace based assessment on doctors' performance, were included. Studies were excluded if the sampled population was non-medical or the study was performed with medical students. Review articles, commentaries, and letters were also excluded. The final exclusion criterion was the use of simulated patients or models rather than real life clinical encounters. Sixteen studies were included. Fifteen of these were non-comparative descriptive or observational studies; the other was a randomised controlled trial. Study quality was mixed. Eight studies examined multisource feedback with mixed results; most doctors felt that multisource feedback had educational value, although the evidence for practice change was conflicting. Some junior doctors and surgeons displayed little willingness to change in response to multisource feedback, whereas family physicians might be more prepared to initiate change. Performance changes were more likely to occur when feedback was credible and accurate or when coaching was provided to help subjects identify their strengths and weaknesses. Four studies examined the mini-clinical evaluation exercise, one looked at direct observation of procedural skills, and three were concerned with multiple assessment methods: all these studies reported positive results for the educational impact of workplace based assessment tools

Youth Reactions to Participation in Psychological Assessment Procedures

Science.gov (United States)

Saldana, Lisa; DuBois, David L.

2006-01-01

This study investigates self-reported positive and negative reactions of youth to psychological assessment procedures. A community sample (COM) reported reactions to completing a self-report questionnaire of negative emotional states. A clinical sample (CL) reported reactions both to completion of the questionnaire and to a clinical intake.…

Obesity-related costs and the economic impact of laparoscopic adjustable gastric banding procedures: benefits in the Texas Employees Retirement System.

Science.gov (United States)

Perryman, M Ray; Gleghorn, Virginia

2010-01-01

To assess the return on investment (ROI) and economic impact of providing insurance coverage for the laparoscopic adjustable gastric banding (LAGB) procedure in classes II and III obese members of the Texas Employees Retirement System (ERS) and their dependents from payer, employer, and societal perspectives. Classes II and III obese employee members and their adult dependents were identified in a Texas ERS database using self-reported health risk assessment (HRA) data. Direct health costs and related absenteeism and mortality losses were estimated using data from previous research. A dynamic input-output model was then used to calculate overall economic effects by incorporating direct, indirect, and induced impacts. Direct health costs were inflation-adjusted to 2008 US dollars using the Consumer Price Index for Medical Care and other spending categories were similarly adjusted using relevant consumer and industrial indices. The future cost savings and other monetary benefits were discounted to present value using a real rate of 4.00%. From the payer perspective (ERS), the payback period for direct health costs associated with the LAGB procedure was 23-24 months and the annual return (over 5 years) was 28.8%. From the employer perspective (State of Texas), the costs associated with the LAGB procedure were recouped within 17-19 months (in terms of direct, indirect, and induced gains as they translated into State revenue) and the annual return (over 5 years) was 45.5%. From a societal perspective, the impact on total business activity for Texas (over 5 years) included gains of $195.3 million in total expenditures, $93.8 million in gross product, and 1354 person-years of employment. The analysis was limited by the following: reliance on other studies for methodology and use of a control sample; restriction of cost savings to 2.5 years which required out-of-sample forecasting; conservative assumptions related to the cost of the procedure; exclusion of presenteeism

Environmental Impact Assessment and Space Activities

Science.gov (United States)

Viikari, L.

least more open distribution of information about human enterprises in space, too.However, the "public concerned" in space activities may cover the entire humanity, which would most likely direct the possible spatial EIA procedures into the auspices of the UN, with states representing their portion of the "public". Despite the peculiarities in assessing the potential impacts of space activities, Environmental Impact Assessment, modified to answer thes e particular features, would seem as a tool worth considering for the above objectives of enhanced environmental protection and public involvement. This is particularly true, as any adverse environmental impacts of space activities are highly difficult to mitigate, once they have materialized. For the above mentioned reasons, and for the fact that space activities are regulated for a major part on policy level, particularly Strategic Environmental Assessment (SEA) would seem a viable option. As distinct from the project EIA, the SEA means carrying out EIAs of plans themselves, i.e. it directly addresses the environmental implications of proposed strategies and policies. Formerly, the governmental authorities tended to regard SEA with suspicion because of the public interest groups involvement in policy making that the SEA entails. However, currently the SEA is a highly topical issue in the international arena, particularly because of the ongoing discussions within the United Nations Economic Commision for Europe about adopting a Protocol on Strategic Environmental Assessment to amend the Espoo Convention, and of the recent EU Directive (2001/42/EC) on the assessment of the effects of certain plans and programmes on t he environment. These instruments could also serve as feasible models for SEA in the outer space environment.

Creating a spatial multi-criteria decision support system for energy related integrated environmental impact assessment

International Nuclear Information System (INIS)

Wanderer, Thomas; Herle, Stefan

2015-01-01

By their spatially very distributed nature, profitability and impacts of renewable energy resources are highly correlated with the geographic locations of power plant deployments. A web-based Spatial Decision Support System (SDSS) based on a Multi-Criteria Decision Analysis (MCDA) approach has been implemented for identifying preferable locations for solar power plants based on user preferences. The designated areas found serve for the input scenario development for a subsequent integrated Environmental Impact Assessment. The capabilities of the SDSS service get showcased for Concentrated Solar Power (CSP) plants in the region of Andalusia, Spain. The resulting spatial patterns of possible power plant sites are an important input to the procedural chain of assessing impacts of renewable energies in an integrated effort. The applied methodology and the implemented SDSS are applicable for other renewable technologies as well. - Highlights: • The proposed tool facilitates well-founded CSP plant siting decisions. • Spatial MCDA methods are implemented in a WebGIS environment. • GIS-based SDSS can contribute to a modern integrated impact assessment workflow. • The conducted case study proves the suitability of the methodology

Creating a spatial multi-criteria decision support system for energy related integrated environmental impact assessment

Energy Technology Data Exchange (ETDEWEB)

Wanderer, Thomas, E-mail: thomas.wanderer@dlr.de; Herle, Stefan, E-mail: stefan.herle@rwth-aachen.de

2015-04-15

By their spatially very distributed nature, profitability and impacts of renewable energy resources are highly correlated with the geographic locations of power plant deployments. A web-based Spatial Decision Support System (SDSS) based on a Multi-Criteria Decision Analysis (MCDA) approach has been implemented for identifying preferable locations for solar power plants based on user preferences. The designated areas found serve for the input scenario development for a subsequent integrated Environmental Impact Assessment. The capabilities of the SDSS service get showcased for Concentrated Solar Power (CSP) plants in the region of Andalusia, Spain. The resulting spatial patterns of possible power plant sites are an important input to the procedural chain of assessing impacts of renewable energies in an integrated effort. The applied methodology and the implemented SDSS are applicable for other renewable technologies as well. - Highlights: • The proposed tool facilitates well-founded CSP plant siting decisions. • Spatial MCDA methods are implemented in a WebGIS environment. • GIS-based SDSS can contribute to a modern integrated impact assessment workflow. • The conducted case study proves the suitability of the methodology.

Guidelines and procedures for the International Code Assessment and Applications Program

International Nuclear Information System (INIS)

1987-04-01

This document presents the guidelines and procedures by which the International Code Assessment and Applications Program (ICAP) will be conducted. The document summarizes the management structure of the program and the relationships between and responsibilities of the United States Nuclear Regulatory Commission (USNRC) and the international participants. The procedures for code maintenance and necessary documentation are described. Guidelines for the performance and documentation of code assessment studies are presented. An overview of an effort to quantify code uncertainty, which the ICAP supports, is included

What is Health Impact Assessment?

Directory of Open Access Journals (Sweden)

Ahmet Soysal

2010-12-01

Full Text Available Health Impact Assessment (HIA was disseminated by World Health Organization (WHO European Region in Gothenburg consensus paper in 1999. In this consensus, HIA is defined as ‘a combination of procedures, methods and tools by which a policy, program or project may be judged as to its potential effects on the health of population and the distribution of those effects within the population’. HIA was accepted as a goal for 4th phase of healthy city projects between 2003- 2008. HIA is a new process for our country and especially municipal boroughs, local authorities interest with it. There is no legal base for HIA in our country. EIA practices conducted since 1993 showed us that, environmental and public health was postponed. Functional and decisive implementation of HAI depends on legal basis and national acceptance. If legal basis is supplied, society must take care about it, work for strict application and have to put a crimp in going back. [TAF Prev Med Bull 2010; 9(6.000: 689-694

Environmental impact assessment screening tool

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-05-01

An environmental assessment and impact planning software, SCREENER, was tested at a pilot project at the Cameco site (Port Hope). SCREENER was used to screen the impacts of a new construction project in accordance with the process and reporting requirements laid out in the Canadian Environmental Assessment Act. The software test concentrated on the activities that are directly involved with the structure construction and site preparation activities. In addition, a two and one half day training course was given to three AECB staff using the test case as a hands on example. The conclusion of this project is that an automated tool such as SCREENER (or Calyx, the new generation of environmental assessment tools from ESSA Software Ltd.), will help the AECB to standardize the approach to environmental assessment, assist in project planning, and save resources in the screening process. The new approach could allow to allocate AECB limited resources to the detailed assessments required for maximum impact activities. 2 figs. 7 refs.

Environmental impact assessment screening tool

International Nuclear Information System (INIS)

1995-05-01

An environmental assessment and impact planning software, SCREENER, was tested at a pilot project at the Cameco site (Port Hope). SCREENER was used to screen the impacts of a new construction project in accordance with the process and reporting requirements laid out in the Canadian Environmental Assessment Act. The software test concentrated on the activities that are directly involved with the structure construction and site preparation activities. In addition, a two and one half day training course was given to three AECB staff using the test case as a hands on example. The conclusion of this project is that an automated tool such as SCREENER (or Calyx, the new generation of environmental assessment tools from ESSA Software Ltd.), will help the AECB to standardize the approach to environmental assessment, assist in project planning, and save resources in the screening process. The new approach could allow to allocate AECB limited resources to the detailed assessments required for maximum impact activities

Impact assessment of ionising radiation on wildlife

International Nuclear Information System (INIS)

Copplestone, D.; Bielby, S.; Jones, S.

2001-01-01

This R and D project was commissioned by the Environment Agency and English Nature in January 2001 to provide up-to-date information on the impacts of ionising radiation on wildlife, upon which a robust assessment approach may be developed. This approach will also feed into the European Commission funded project 'Framework for Assessment of Environmental Impact' (FASSET), due to complete in October 2003. This report describes the behaviour and transport of radionuclides in the environment, considers the impact of ionising radiation on wildlife, and makes recommendations on an approach for the impact assessment of ionising radiation on wildlife for England and Wales. The assessment approach focuses on three ecosystems representative of those considered potentially most at risk from the impact of authorised radioactive discharges, namely a coastal grassland (terrestrial ecosystem); estuarine and freshwater ecosystems. The likely scale of the impact on wildlife is also assessed in light of a preliminary analysis based on this assessment approach. The aims of the report are: to summarise the latest research on the behaviour, transfer and impact of ionising radiation effects on wildlife; an outline and review of the relevant European and national legislation which has impacts on the requirements for assessments of the impact of ionising radiation on wildlife in the UK; to consider the role of regulatory bodies in assessing the impact of ionising radiation on wildlife with respect to England and Wales; to make recommendations on the relative biological effectiveness of different types of radiation with respect to wildlife; and to recommend an approach to assess the impacts to wildlife from ionising radiation from authorised discharges in England and Wales, with spreadsheets to support the methodology. The report demonstrates the behaviour and transfer of radionuclides in a number of different ecosystem types. Particular emphasis is placed on exposure pathways in those

Impact assessment: Eroding benefits through streamlining?

Energy Technology Data Exchange (ETDEWEB)

Bond, Alan, E-mail: alan.bond@uea.ac.uk [School of Environmental Sciences, University of East Anglia (United Kingdom); School of Geo and Spatial Sciences, North-West University (South Africa); Pope, Jenny, E-mail: jenny@integral-sustainability.net [Integral Sustainability (Australia); Curtin University Sustainability Policy Institute (Australia); Morrison-Saunders, Angus, E-mail: A.Morrison-Saunders@murdoch.edu.au [School of Geo and Spatial Sciences, North-West University (South Africa); Environmental Science, Murdoch University (Australia); Retief, Francois, E-mail: francois.retief@nwu.ac.za [School of Geo and Spatial Sciences, North-West University (South Africa); Gunn, Jill A.E., E-mail: jill.gunn@usask.ca [Department of Geography and Planning and School of Environment and Sustainability, University of Saskatchewan (Canada)

2014-02-15

This paper argues that Governments have sought to streamline impact assessment in recent years (defined as the last five years) to counter concerns over the costs and potential for delays to economic development. We hypothesise that this has had some adverse consequences on the benefits that subsequently accrue from the assessments. This hypothesis is tested using a framework developed from arguments for the benefits brought by Environmental Impact Assessment made in 1982 in the face of the UK Government opposition to its implementation in a time of economic recession. The particular benefits investigated are ‘consistency and fairness’, ‘early warning’, ‘environment and development’, and ‘public involvement’. Canada, South Africa, the United Kingdom and Western Australia are the jurisdictions tested using this framework. The conclusions indicate that significant streamlining has been undertaken which has had direct adverse effects on some of the benefits that impact assessment should deliver, particularly in Canada and the UK. The research has not examined whether streamlining has had implications for the effectiveness of impact assessment, but the causal link between streamlining and benefits does sound warning bells that merit further investigation. -- Highlights: • Investigation of the extent to which government has streamlined IA. • Evaluation framework was developed based on benefits of impact assessment. • Canada, South Africa, the United Kingdom, and Western Australia were examined. • Trajectory in last five years is attrition of benefits of impact assessment.

Impact assessment: Eroding benefits through streamlining?

International Nuclear Information System (INIS)

Bond, Alan; Pope, Jenny; Morrison-Saunders, Angus; Retief, Francois; Gunn, Jill A.E.

2014-01-01

This paper argues that Governments have sought to streamline impact assessment in recent years (defined as the last five years) to counter concerns over the costs and potential for delays to economic development. We hypothesise that this has had some adverse consequences on the benefits that subsequently accrue from the assessments. This hypothesis is tested using a framework developed from arguments for the benefits brought by Environmental Impact Assessment made in 1982 in the face of the UK Government opposition to its implementation in a time of economic recession. The particular benefits investigated are ‘consistency and fairness’, ‘early warning’, ‘environment and development’, and ‘public involvement’. Canada, South Africa, the United Kingdom and Western Australia are the jurisdictions tested using this framework. The conclusions indicate that significant streamlining has been undertaken which has had direct adverse effects on some of the benefits that impact assessment should deliver, particularly in Canada and the UK. The research has not examined whether streamlining has had implications for the effectiveness of impact assessment, but the causal link between streamlining and benefits does sound warning bells that merit further investigation. -- Highlights: • Investigation of the extent to which government has streamlined IA. • Evaluation framework was developed based on benefits of impact assessment. • Canada, South Africa, the United Kingdom, and Western Australia were examined. • Trajectory in last five years is attrition of benefits of impact assessment

Is Environmental Impact Assessment fulfilling its potential?

DEFF Research Database (Denmark)

Larsen, Sanne Vammen

2014-01-01

fuel with CO2-neutral energy sources. A variety of these projects are subject to environmental impact assessment (EIA), which raises the following questions: What role does an impact assessment play? When is the project environmentally friendly? How are climate change-related impacts assessed......One of the topics receiving much attention in recent years is climate change and the potential of its integration in impact assessment, both in terms of achieving mitigation and adaptation. Renewable energy projects are part of the efforts to mitigate climate change, replacing the use of fossil...... adaptation is absent. Also, the results show an emphasis on positive impacts in the reports, and in a few cases discussions of enhancements. Identification and assessment of negative climate change impacts are less apparent. This leads to a discussion of the results in the light of the purpose of EIA....

A probabilistic seismic risk assessment procedure for nuclear power plants: (I) Methodology

Science.gov (United States)

Huang, Y.-N.; Whittaker, A.S.; Luco, N.

2011-01-01

A new procedure for probabilistic seismic risk assessment of nuclear power plants (NPPs) is proposed. This procedure modifies the current procedures using tools developed recently for performance-based earthquake engineering of buildings. The proposed procedure uses (a) response-based fragility curves to represent the capacity of structural and nonstructural components of NPPs, (b) nonlinear response-history analysis to characterize the demands on those components, and (c) Monte Carlo simulations to determine the damage state of the components. The use of response-rather than ground-motion-based fragility curves enables the curves to be independent of seismic hazard and closely related to component capacity. The use of Monte Carlo procedure enables the correlation in the responses of components to be directly included in the risk assessment. An example of the methodology is presented in a companion paper to demonstrate its use and provide the technical basis for aspects of the methodology. ?? 2011 Published by Elsevier B.V.

Environmental impact assessment: Retrospect and prospect

International Nuclear Information System (INIS)

Jay, Stephen; Jones, Carys; Slinn, Paul; Wood, Christopher

2007-01-01

The widespread experience of environmental impact assessment (EIA) as an anticipatory environmental management tool has generated a considerable debate over the extent to which it is achieving its purposes. This has been measured in terms of EIA 'effectiveness', especially as discussion has moved away from issues of procedural implementation, to the more substantive goals of EIA and its place within broader decision-making contexts. Empirical studies have revealed the relatively weak degree of influence on planning decisions that is being exerted by EIA, which is increasingly being attributed to its rationalist beginnings. This article seeks to direct this debate towards the founding political purposes of EIA which, it is argued, provide a neglected, yet strong, basis for EIA reform. A number of illustrative suggestions are made as a result of this redirection, to enable EIA to adopt a more determinative role in decision making and to contribute to more sustainable patterns of development planning

Surgical Procedures for BPH/LUTS: Impact on Male Sexual Health.

Science.gov (United States)

Becher, Edgardo F; McVary, Kevin T

2014-01-01

Lower urinary tract symptoms (LUTS) because of benign prostatic hyperplasia (BPH) are a highly prevalent condition in men over 50 years old, and their incidence increases with age. The relationship between LUTS and erectile dysfunction (ED) has received increased attention recently because both diseases are highly prevalent, frequently co-associated in the same aging male group, and contribute significantly to the overall quality of life. In this review, we will examine the literature to assess the impact of surgical and minimally invasive treatments for LUTS/BPH on the male's sexual health. The impact of the various surgical and minimally invasive treatments for LUTS/BPH was reviewed to ascertain the impact on erectile and ejaculatory function. Sexual side effects of treatment for LUTS/BPH are underappreciated by urologists but likely play a prominent role in patient decision making, creating a disparity between provider and patient. Almost all accepted therapies for LUTS (surgical or medical) can affect some aspect of sexual health, making it imperative that health-care professionals understand their patients' concerns and motivations in these two linked diseases. The incidence of newly diagnosed postoperative ED in patients treated with monopolar transurethral resection (TURP) is around 14%, with reported values in various studies ranging from 0-32.5%, 7.7%, 6.5%, 17%, to 14%. Importantly, there is no significant difference reported between bipolar and monopolar TURP on sexual function. The risk of sexual side effects is an important one to consider in discussing the implications for any LUTS intervention as they play a prominent role in patient motivation, acceptance of bother and decision making concerning surgical intervention, thus creating a potential disparity between provider and patient. Becher EF and McVary KT. Surgical procedures for BPH/LUTS: Impact on male sexual health. Sex Med Rev 2014;2:47-55. Copyright © 2014 International Society for Sexual

Practitioners, professional cultures, and perceptions of impact assessment

International Nuclear Information System (INIS)

Morgan, Richard K.; Hart, Andrew; Freeman, Claire; Coutts, Brian; Colwill, David; Hughes, Andrew

2012-01-01

The very nature of impact assessment (IA) means that it often involves practitioners from a very wide range of disciplinary and professional backgrounds, which open the possibility that how IA is perceived and practised may vary according to the professional background of the practitioner. The purpose of this study is to investigate the extent to which a practitioner's professional background influences their perceptions of the adequacy of impact assessment in New Zealand under the Resource Management Act (RMA). Information gathered concerned professional affiliations, training, understanding of impact assessment practise, and perceptions of adequacy in relation to impact assessment. The results showed a dominance of a legalistic, operational perspective of impact assessment under the Resource Management Act, across all the main professions represented in the study. However, among preparers of impact assessments there was clear evidence of differences between the four main professional groups – surveyors, planners, engineers and natural scientists – in the way they see the nature and purpose of impact assessment, the practical steps involved, and what constitutes adequacy. Similarly, impact assessment reviewers – predominantly planners and lawyers – showed variations in their expectations of impact assessment depending on their respective professional affiliation. Although in many cases the differences seem to be more of a matter of emphasis, rather than major disputes on what constitutes a good process, even those differences can add up to rather distinct professional cultures of impact assessment. The following factors are seen as leading to the emergence of such professional cultures: different professions often contribute in different ways to an impact assessment, affecting their perception of the nature and purpose of the process; impact assessment training will usually be a secondary concern, compared with the core professional training, which will be

A new tool for the evaluation of the analytical procedure: Green Analytical Procedure Index.

Science.gov (United States)

Płotka-Wasylka, J

2018-05-01

A new means for assessing analytical protocols relating to green analytical chemistry attributes has been developed. The new tool, called GAPI (Green Analytical Procedure Index), evaluates the green character of an entire analytical methodology, from sample collection to final determination, and was created using such tools as the National Environmental Methods Index (NEMI) or Analytical Eco-Scale to provide not only general but also qualitative information. In GAPI, a specific symbol with five pentagrams can be used to evaluate and quantify the environmental impact involved in each step of an analytical methodology, mainly from green through yellow to red depicting low, medium to high impact, respectively. The proposed tool was used to evaluate analytical procedures applied in the determination of biogenic amines in wine samples, and polycyclic aromatic hydrocarbon determination by EPA methods. GAPI tool not only provides an immediately perceptible perspective to the user/reader but also offers exhaustive information on evaluated procedures. Copyright © 2018 Elsevier B.V. All rights reserved.

45 CFR 640.5 - Responsibilities and procedures for preparation of an environmental impact statement.

Science.gov (United States)

2010-10-01

... an environmental impact statement. 640.5 Section 640.5 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL SCIENCE FOUNDATION COMPLIANCE WITH THE NATIONAL ENVIRONMENTAL POLICY ACT § 640.5 Responsibilities and procedures for preparation of an environmental impact statement. (a) If...

Social Impact Assessment : Guidance for assessing and managing the social impacts of projects

NARCIS (Netherlands)

Vanclay, Francis; Esteves, Ana Maria; Aucamp, Ilse; Franks, Daniel

2015-01-01

The purpose of this Guidance Note is to provide advice to various stakeholders about what is expected in good practice social impact assessment (SIA) and social impact management processes, especially in relation to project development. Project development refers to dams, mines, oil and gas

Road ecology in environmental impact assessment

International Nuclear Information System (INIS)

Karlson, Mårten; Mörtberg, Ulla; Balfors, Berit

2014-01-01

Transport infrastructure has a wide array of effects on terrestrial and aquatic ecosystems, and road and railway networks are increasingly being associated with a loss of biodiversity worldwide. Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) are two legal frameworks that concern physical planning, with the potential to identify, predict, mitigate and/or compensate transport infrastructure effects with negative impacts on biodiversity. The aim of this study was to review the treatment of ecological impacts in environmental assessment of transport infrastructure plans and projects. A literature review on the topic of EIA, SEA, biodiversity and transport infrastructure was conducted, and 17 problem categories on the treatment of biodiversity were formulated by means of a content analysis. A review of environmental impact statements and environmental reports (EIS/ER) produced between 2005 and 2013 in Sweden and the UK was then conducted using the list of problems as a checklist. The results show that the treatment of ecological impacts has improved substantially over the years, but that some impacts remain problematic; the treatment of fragmentation, the absence of quantitative analysis and that the impact assessment study area was in general delimited without consideration for the scales of ecological processes. Actions to improve the treatment of ecological impacts could include improved guidelines for spatial and temporal delimitation, and the establishment of a quantitative framework including tools, methods and threshold values. Additionally, capacity building and further method development of EIA and SEA friendly spatial ecological models can aid in clarifying the costs as well as the benefits in development/biodiversity tradeoffs. - Highlights: • The treatment of ecological impacts in EIA and SEA has improved. • Quantitative methods for ecological impact assessment were rarely used • Fragmentation effects were recognized

Road ecology in environmental impact assessment

Energy Technology Data Exchange (ETDEWEB)

Karlson, Mårten, E-mail: mkarlso@kth.se; Mörtberg, Ulla, E-mail: mortberg@kth.se; Balfors, Berit, E-mail: balfors@kth.se

2014-09-15

Transport infrastructure has a wide array of effects on terrestrial and aquatic ecosystems, and road and railway networks are increasingly being associated with a loss of biodiversity worldwide. Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) are two legal frameworks that concern physical planning, with the potential to identify, predict, mitigate and/or compensate transport infrastructure effects with negative impacts on biodiversity. The aim of this study was to review the treatment of ecological impacts in environmental assessment of transport infrastructure plans and projects. A literature review on the topic of EIA, SEA, biodiversity and transport infrastructure was conducted, and 17 problem categories on the treatment of biodiversity were formulated by means of a content analysis. A review of environmental impact statements and environmental reports (EIS/ER) produced between 2005 and 2013 in Sweden and the UK was then conducted using the list of problems as a checklist. The results show that the treatment of ecological impacts has improved substantially over the years, but that some impacts remain problematic; the treatment of fragmentation, the absence of quantitative analysis and that the impact assessment study area was in general delimited without consideration for the scales of ecological processes. Actions to improve the treatment of ecological impacts could include improved guidelines for spatial and temporal delimitation, and the establishment of a quantitative framework including tools, methods and threshold values. Additionally, capacity building and further method development of EIA and SEA friendly spatial ecological models can aid in clarifying the costs as well as the benefits in development/biodiversity tradeoffs. - Highlights: • The treatment of ecological impacts in EIA and SEA has improved. • Quantitative methods for ecological impact assessment were rarely used • Fragmentation effects were recognized

Current policies, strategies and aspects of environmental impact assessment in a transboundary context

International Nuclear Information System (INIS)

1996-01-01

Environmental impact assessment (EIA) has already shown its value for implementing and strengthening sustainable development, as it combines the precautionary principles with the principle of preventing environmental damage and also arranges for public participation. EIA is already used as an effective instrument for improving the quality of the environment at the national level and it is understood that the EIA Convention will lead to environmentally sound and sustainable development by providing information on the interrelationship between economic activities and their environmental consequences in particular in a transboundary context. The Convention obliges Parties to assess the environmental impacts at an early stage of planning and includes measures and procedures to prevent, control or reduce any significant adverse effect on the environment, particularly any transboundary effect, which is likely to be caused by a proposed activity or any major change to an existing activity

Life Cycle Impact Assessment

DEFF Research Database (Denmark)

Rosenbaum, Ralph K.; Hauschild, Michael Zwicky; Boulay, Anne-Marie

2018-01-01

This chapter is dedicated to the third phase of an LCA study, the Life Cycle Impact Assessment (LCIA) where the life cycle inventory’s information on elementary flows is translated into environmental impact scores. In contrast to the three other LCA phases, LCIA is in practice largely automated...

Knowing the operative game plan: a novel tool for the assessment of surgical procedural knowledge.

Science.gov (United States)

Balayla, Jacques; Bergman, Simon; Ghitulescu, Gabriela; Feldman, Liane S; Fraser, Shannon A

2012-08-01

What is the source of inadequate performance in the operating room? Is it a lack of technical skills, poor judgment or a lack of procedural knowledge? We created a surgical procedural knowledge (SPK) assessment tool and evaluated its use. We interviewed medical students, residents and training program staff on SPK assessment tools developed for 3 different common general surgery procedures: inguinal hernia repair with mesh in men, laparoscopic cholecystectomy and right hemicolectomy. The tools were developed as a step-wise assessment of specific surgical procedures based on techniques described in a current surgical text. We compared novice (medical student to postgraduate year [PGY]-2) and expert group (PGY-3 to program staff) scores using the Mann-Whitney U test. We calculated the total SPK score and defined a cut-off score using receiver operating characteristic analysis. In all, 5 participants in 7 different training groups (n = 35) underwent an interview. Median scores for each procedure and overall SPK scores increased with experience. The median SPK for novices was 54.9 (95% confidence interval [CI] 21.6-58.8) compared with 98.05 (95% CP 94.1-100.0) for experts (p = 0.012). The SPK cut-off score of 93.1 discriminates between novice and expert surgeons. Surgical procedural knowledge can reliably be assessed using our SPK assessment tool. It can discriminate between novice and expert surgeons for common general surgical procedures. Future studies are planned to evaluate its use for more complex procedures.

Assessment of creep-fatigue damage using the UK strain based procedure

International Nuclear Information System (INIS)

Bate, S.K.

1997-01-01

The UK strain based procedures have been developed for the evaluation of damage in structures, arising from fatigue cycles and creep processes. The fatigue damage is assessed on the basis of modelling crack growth from about one grain depth to an allowable limit which represents an engineering definition of crack formation. Creep damage is based up on the exhaustion of available ductility by creep strain accumulation. The procedures are applicable only when level A and B service conditions apply, as defined in RCC-MR or ASME Code Case N47. The procedures require the components of strain to be evaluated separately, thus they may be used with either full inelastic analysis or simplified methods. To support the development of the UK strain based creep-fatigue procedures an experimental program was undertaken by NNC to study creep-fatigue interaction of structures operating at high temperature. These tests, collectively known as the SALTBATH tests considered solid cylinder and tube-plate specimens, manufactured from Type 316 stainless steel. These specimens were subjected to thermal cycles between 250 deg. C and 600 deg. C. In all the cases the thermal cycle produces tensile residual stresses during dwells at 600 deg. C. One of the tube-plate specimens was used as a benchmark for validating the strain based creep fatigue procedures and subsequently as part of a CEC co-operative study. This benchmark work is described in this paper. A thermal and inelastic stress analysis was carried out using the finite element code ABAQUS. The inelastic behaviour of the material was described using the ORNL constitutive equations. A creep fatigue assessment using the strain based procedures has been compared with an assessment using the RCC-MR inelastic rules. The analyses indicated that both the UK strain based procedures and the RCC-MR rules were conservative, but the conservatism was greater for the RCC-MR rules. (author). 8 refs, 8 figs, 4 tabs

Should different impact assessment instruments be integrated? Evidence from English spatial planning

International Nuclear Information System (INIS)

Tajima, Ryo; Fischer, Thomas B.

2013-01-01

This paper aims at providing empirical evidence to the question as to whether integration of different instruments is achieving its aim in supporting sustainable decision making, focusing on SEA inclusive sustainability appraisal (SA) and other impact assessments (IAs) currently used in English spatial planning. Usage of IAs in addition to SA is established and an analysis of the integration approach (in terms of process, output, and assessor) as well as its effectiveness is conducted. It is found that while integration enhances effectiveness to some extent, too much integration, especially in terms of the procedural element, appears to diminish the overall effectiveness of each IA in influencing decisions as they become captured by the balancing function of SA. -- Highlights: ► The usage of different impact assessments in English spatial planning is clarified. ► The relationship between integration approach and effectiveness is analyzed. ► Results suggest that integration does not necessarily lead to more sustainable decisions. ► Careful consideration is recommended upon process integration

Should different impact assessment instruments be integrated? Evidence from English spatial planning

Energy Technology Data Exchange (ETDEWEB)

Tajima, Ryo, E-mail: tajima.ryo@nies.go.jp [Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology, 4259-G5-9 Nagatsuta-cho, Midori-ku, Yokoyama City, Kanagawa, 226-8502 (Japan); Fischer, Thomas B., E-mail: fischer@liverpool.ac.uk [Department of Geography and Planning, School of Environmental Sciences, University of Liverpool, 74 Bedford Street South, Liverpool L69 7ZQ (United Kingdom)

2013-07-15

This paper aims at providing empirical evidence to the question as to whether integration of different instruments is achieving its aim in supporting sustainable decision making, focusing on SEA inclusive sustainability appraisal (SA) and other impact assessments (IAs) currently used in English spatial planning. Usage of IAs in addition to SA is established and an analysis of the integration approach (in terms of process, output, and assessor) as well as its effectiveness is conducted. It is found that while integration enhances effectiveness to some extent, too much integration, especially in terms of the procedural element, appears to diminish the overall effectiveness of each IA in influencing decisions as they become captured by the balancing function of SA. -- Highlights: ► The usage of different impact assessments in English spatial planning is clarified. ► The relationship between integration approach and effectiveness is analyzed. ► Results suggest that integration does not necessarily lead to more sustainable decisions. ► Careful consideration is recommended upon process integration.

Critical Emergency Medicine Procedural Skills: A Comparative Study of Methods for Teaching and Assessment.

Science.gov (United States)

Chapman, Dane M.; And Others

Three critical procedural skills in emergency medicine were evaluated using three assessment modalities--written, computer, and animal model. The effects of computer practice and previous procedure experience on skill competence were also examined in an experimental sequential assessment design. Subjects were six medical students, six residents,…

Social impact assessment in energy projects

International Nuclear Information System (INIS)

Koivujaervi, S.; Kantola, I.; Maekinen, P.

1998-01-01

The research report is based on literature and interviews on the social impact assessment (SIA) in energy projects in Finland, both before and after the EIA Act has been in force in Finland. The concept and content of SIA, the requirements set by the legislation, its relation with other environmental impacts, the assessment process and the used methods have been studied on the basis of the literature analysis. A total of 26 persons representing the coordination authorities, persons issuing statements, researchers, civil servants, consultants and project developers were interviewed for the research. The interviews were made by the University of Turku in the form of theme interviews, investigating the present status, practices and expectations of the SIA. The unestablished status was seen to be the problem in the SIA, which was reflected in the interviewers' varying views about the content of the SIA. Among the operators, the general character of the SIA criticism in the statements concerning the assessment programmes or reports was seen as a problem as well; the assessment of social impact has been considered to be insufficient, however, without any identification of the effects or how the effects should have been assessed. For the time preceding the EIA Act, the assessment of the social impact of hydraulic work, power plant and transmission line projects and the project of the fifth nuclear power plant have been studied. As to the power plant and transmission line projects after the validity of the EIA Act, all the 20 projects were gone through which had progressed during the spring 1998 at least to the assessment report stage. Of these projects, the assessment of the social impact of one transmission line and one power plant project was studied in detail. The report also studies the assessment of the social impact of the repository for nuclear waste on the basis of the experience gained in Finland and in other countries. On the basis of the literature study

Testing the usability of the Rapid Impact Assessment Matrix (RIAM) method for comparison of EIA and SEA results

International Nuclear Information System (INIS)

Kuitunen, Markku; Jalava, Kimmo; Hirvonen, Kimmo

2008-01-01

This study examines how the results of Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) could be compared using the Rapid Impact Assessment Matrix (RIAM) method. There are many tools and techniques that have been developed for use in impact assessment processes, including scoping, checklists, matrices, qualitative and quantitative models, literature reviews, and decision-support systems. While impact assessment processes have become more technically complicated, it is recognized that approaches including simpler applications of available tools and techniques are also appropriate. The Rapid Impact Assessment Matrix (RIAM) is a tool for organizing, analysing and presenting the results of a holistic EIA. RIAM was originally developed to compare the impact of alternative procedures in a single project. In this study, we used RIAM to compare the environmental and social impact of different projects, plans and programs realized within the same geographical area. RIAM scoring is based on five separate criteria. The RIAM criteria were applied to the impact that was considered to be the most significant in the evaluated cases, and scores were given both on environmental and social impact. Our results revealed that the RIAM method could be used for comparison and ranking of separate and distinct projects, plans, programs and policies, based on their negative or positive impact. Our data included 142 cases from the area of Central Finland that is covered by the Regional Council of Central Finland. This sample consisted of various types of projects, ranging from road construction to education programs that applied for EU funding

The environmental impact and risk assessment of CO2 capture, transport and storage - an evaluation of the knowledge base

NARCIS (Netherlands)

Koornneef, J.M.; Ramirez, C.A.; Turkenburg, W.C.; Faaij, A.P.C.

2012-01-01

In this study, we identify and characterize known and new environmental consequences associated with CO2 capture from power plants, transport by pipeline and storage in geological formations. We have reviewed (analogous) environmental impact assessment procedures and scientific literature on

Assessing the short term impact of air pollution on mortality: a matching approach.

Science.gov (United States)

Baccini, Michela; Mattei, Alessandra; Mealli, Fabrizia; Bertazzi, Pier Alberto; Carugno, Michele

2017-02-10

The opportunity to assess short term impact of air pollution relies on the causal interpretation of the exposure-response association. However, up to now few studies explicitly faced this issue within a causal inference framework. In this paper, we reformulated the problem of assessing the short term impact of air pollution on health using the potential outcome approach to causal inference. We considered the impact of high daily levels of particulate matter ≤10 μm in diameter (PM 10 ) on mortality within two days from the exposure in the metropolitan area of Milan (Italy), during the period 2003-2006. Our research focus was the causal impact of a hypothetical intervention setting daily air pollution levels under a pre-fixed threshold. We applied a matching procedure based on propensity score to estimate the total number of attributable deaths (AD) during the study period. After defining the number of attributable deaths in terms of difference between potential outcomes, we used the estimated propensity score to match each high exposure day, namely each day with a level of exposure higher than 40 μg/m 3 , with a day with similar background characteristics but a level of exposure lower than 40 μg/m 3 . Then, we estimated the impact by comparing mortality between matched days. During the study period daily exposures larger than 40 μg/m 3 were responsible for 1079 deaths (90% CI: 116; 2042). The impact was more evident among the elderly than in the younger age classes. Exposures ≥ 40 μg/m 3 were responsible, among the elderly, for 1102 deaths (90% CI: 388, 1816), of which 797 from cardiovascular causes and 243 from respiratory causes. Clear evidence of an impact on respiratory mortality was found also in the age class 65-74, with 87 AD (90% CI: 11, 163). The propensity score matching turned out to be an appealing method to assess historical impacts in this field, which guarantees that the estimated total number of AD can be derived directly as sum

A combined deterministic and probabilistic procedure for safety assessment of components with cracks - Handbook.

Energy Technology Data Exchange (ETDEWEB)

Dillstroem, Peter; Bergman, Mats; Brickstad, Bjoern; Weilin Zang; Sattari-Far, Iradj; Andersson, Peder; Sund, Goeran; Dahlberg, Lars; Nilsson, Fred (Inspecta Technology AB, Stockholm (Sweden))

2008-07-01

SSM has supported research work for the further development of a previously developed procedure/handbook (SKI Report 99:49) for assessment of detected cracks and tolerance for defect analysis. During the operative use of the handbook it was identified needs to update the deterministic part of the procedure and to introduce a new probabilistic flaw evaluation procedure. Another identified need was a better description of the theoretical basis to the computer program. The principal aim of the project has been to update the deterministic part of the recently developed procedure and to introduce a new probabilistic flaw evaluation procedure. Other objectives of the project have been to validate the conservatism of the procedure, make the procedure well defined and easy to use and make the handbook that documents the procedure as complete as possible. The procedure/handbook and computer program ProSACC, Probabilistic Safety Assessment of Components with Cracks, has been extensively revised within this project. The major differences compared to the last revision are within the following areas: It is now possible to deal with a combination of deterministic and probabilistic data. It is possible to include J-controlled stable crack growth. The appendices on material data to be used for nuclear applications and on residual stresses are revised. A new deterministic safety evaluation system is included. The conservatism in the method for evaluation of the secondary stresses for ductile materials is reduced. A new geometry, a circular bar with a circumferential surface crack has been introduced. The results of this project will be of use to SSM in safety assessments of components with cracks and in assessments of the interval between the inspections of components in nuclear power plants

Flaw assessment procedure for high temperature reactor components

International Nuclear Information System (INIS)

Ainsworth, R.A.; Takahashi, Y.

1990-01-01

An interim high-temperature flaw assessment procedure is described. This is a result of a collaborative effort between Electric Power Research Institute in the USA, Central Research Institute of Electric Power Industry in Japan, and Nuclear Electric plc in the UK. The procedure addresses preexisting defects subject to creep-fatigue loading conditions. Laws employed to calculate the crack growth per cycle are defined in terms of fracture mechanics parameters and constants related to the component material. The crack growth laws may be integrated to calculate the remaining life of a component or to predict the amount of crack extension in a given period. Fatigue and creep crack growth per cycle are calculated separately, and the total crack extension is taken as the simple sum of the two contributions. An interaction between the two propagation modes is accounted for in the material properties in the separate calculations. In producing the procedure, limitations of the approach have been identified. Some of these limitations are to be addressed in an extension of the current collaborative program. 20 refs

Optimized in vitro procedure for assessing the cytocompatibility of magnesium-based biomaterials.

Science.gov (United States)

Jung, Ole; Smeets, Ralf; Porchetta, Dario; Kopp, Alexander; Ptock, Christoph; Müller, Ute; Heiland, Max; Schwade, Max; Behr, Björn; Kröger, Nadja; Kluwe, Lan; Hanken, Henning; Hartjen, Philip

2015-09-01

Magnesium (Mg) is a promising biomaterial for degradable implant applications that has been extensively studied in vitro and in vivo in recent years. In this study, we developed a procedure that allows an optimized and uniform in vitro assessment of the cytocompatibility of Mg-based materials while respecting the standard protocol DIN EN ISO 10993-5:2009. The mouse fibroblast line L-929 was chosen as the preferred assay cell line and MEM supplemented with 10% FCS, penicillin/streptomycin and 4mM l-glutamine as the favored assay medium. The procedure consists of (1) an indirect assessment of effects of soluble Mg corrosion products in material extracts and (2) a direct assessment of the surface compatibility in terms of cell attachment and cytotoxicity originating from active corrosion processes. The indirect assessment allows the quantification of cell-proliferation (BrdU-assay), viability (XTT-assay) as well as cytotoxicity (LDH-assay) of the mouse fibroblasts incubated with material extracts. Direct assessment visualizes cells attached to the test materials by means of live-dead staining. The colorimetric assays and the visual evaluation complement each other and the combination of both provides an optimized and simple procedure for assessing the cytocompatibility of Mg-based biomaterials in vitro. Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

The assessment of aesthetic and perceptual aspects within environmental impact assessment of renewable energy projects in Italy

International Nuclear Information System (INIS)

Tolli, Michela; Recanatesi, Fabio; Piccinno, Matteo; Leone, Antonio

2016-01-01

The main aim of this paper is to explore how perceptual and aesthetic impact analyses are considered in Environmental Impact Assessment (EIA), with specific reference to Italian renewable energy projects. To investigate this topic, the paper starts by establishing which factors are linked with perceptual and aesthetic impacts and why it is important to analyze these aspects, which are also related to legislative provisions and procedures in Europe and in Italy. In particular the paper refers to renewable energy projects because environmental policies are encouraging more and more investment in this kind of primary resource. The growing interest in this type of energy is leading to the realization of projects which change the governance of territories, with inevitable effects on the landscape from the aesthetic and perceptual points of view. Legislative references to EIA, including the latest directive regarding this topic show the importance of integrating the assessment of environmental and perceptual impacts, thus there is a need to improve EIA methodological approaches to this purpose. This paper proposes a profile of aesthetic and perceptual impact analysis in EIA for renewable energy projects in Italy, and concludes with recommendations as to how this kind of analysis could be improved. - Highlights: • We analyze 29 EIA Reports of Italian renewable energy projects. • We examine esthetic and perceptual aspects present in Italian EIA reports. • We identified inconsistency in use of methods for esthetic and perceptual aspects. • Local populations are rarely included as stakeholders in EIAs. • A shared understanding of perceptual and esthetic issues in EIA proceedings is required.

The assessment of aesthetic and perceptual aspects within environmental impact assessment of renewable energy projects in Italy

Energy Technology Data Exchange (ETDEWEB)

Tolli, Michela, E-mail: michela.tolli@uniroma1.it [Department of Architecture and Design (DiAP), Sapienza University of Rome, Via Gramsci 53, 00197 Rome (Italy); Recanatesi, Fabio, E-mail: fabio.rec@unitus.it [Department of Agriculture, Forests, Nature and Energy (D.A.F.N.E.), Tuscia University, Via S. Camillo de Lellis, 01100 Viterbo (Italy); Piccinno, Matteo; Leone, Antonio [Department of Agriculture, Forests, Nature and Energy (D.A.F.N.E.), Tuscia University, Via S. Camillo de Lellis, 01100 Viterbo (Italy)

2016-02-15

The main aim of this paper is to explore how perceptual and aesthetic impact analyses are considered in Environmental Impact Assessment (EIA), with specific reference to Italian renewable energy projects. To investigate this topic, the paper starts by establishing which factors are linked with perceptual and aesthetic impacts and why it is important to analyze these aspects, which are also related to legislative provisions and procedures in Europe and in Italy. In particular the paper refers to renewable energy projects because environmental policies are encouraging more and more investment in this kind of primary resource. The growing interest in this type of energy is leading to the realization of projects which change the governance of territories, with inevitable effects on the landscape from the aesthetic and perceptual points of view. Legislative references to EIA, including the latest directive regarding this topic show the importance of integrating the assessment of environmental and perceptual impacts, thus there is a need to improve EIA methodological approaches to this purpose. This paper proposes a profile of aesthetic and perceptual impact analysis in EIA for renewable energy projects in Italy, and concludes with recommendations as to how this kind of analysis could be improved. - Highlights: • We analyze 29 EIA Reports of Italian renewable energy projects. • We examine esthetic and perceptual aspects present in Italian EIA reports. • We identified inconsistency in use of methods for esthetic and perceptual aspects. • Local populations are rarely included as stakeholders in EIAs. • A shared understanding of perceptual and esthetic issues in EIA proceedings is required.

Environmental justice, impact assessment and the politics of knowledge: The implications of assessing the social distribution of environmental outcomes

International Nuclear Information System (INIS)

Walker, Gordon

2010-01-01

Claims of environmental injustice have increasingly become part of environmental conflicts, both explicitly through the work of environmental justice campaigning groups and implicitly through the arguments deployed about the rights and wrongs of a given situation. Such claims can centre on different notions of justice, including those concerned with questions of distribution and procedure. This paper focuses on distributional or outcome justice and explores what implications follow when the distributional concerns of environmental justice are included in the practice of impact assessment processes, including through social impact assessment (SIA). The current use of impact assessment methods in the UK is reviewed showing that although practices are evolving there is a little routine assessment of distributional inequalities. It is argued that whilst this should become part of established practice to ensure that inequalities are revealed and matters of justice are given a higher profile, the implications for conflict within decision making processes are not straightforward. On the one hand, there could be scope for conflict to be ameliorated by analysis of inequalities informing the debate between stakeholders, and facilitating the implementation of mitigation and compensation measures for disadvantaged groups. On the other hand, contestation over how evidence is produced and therefore what it shows, and disagreement as to the basis on which justice and injustice are to be determined, means that conflict may also be generated and sustained within what are essentially political and strategic settings.

Acceptability of Functional Behavioral Assessment Procedures to Special Educators and School Psychologists

Science.gov (United States)

O'Neill, Robert E.; Bundock, Kaitlin; Kladis, Kristin; Hawken, Leanne S.

2015-01-01

This survey study assessed the acceptability of a variety of functional behavioral assessment (FBA) procedures (i.e., functional assessment interviews, rating scales/questionnaires, systematic direct observations, functional analysis manipulations) to a national sample of 123 special educators and a state sample of 140 school psychologists.…

Environmental impact assessment - baseline noise survey and noise impact assessment for Aurora Mine

International Nuclear Information System (INIS)

Yee, S.

1996-01-01

A noise impact assessment was conducted at Syncrude's proposed Aurora Mine site to comply with Alberta Energy and Utilities Board (AEUB) Noise Control Directive ID 94-4. Noise assessments were conducted near a major noise source, i.e. the hydraulic and electric shovels. Noise levels at 50 meters away from the source varied from 72.3 to 79.7 dBA. The worst case noise level was 75 dBA measured at 100 meters away from a hydraulic shovel. This assessment was used to calculate the predicted design sound level from a noise source at the nearest or most impacted occupied dwelling. Two cabins located near the access road and along Kearl Lake respectively, were identified as the most impacted and nearest dwellings to the mine site. The predicted sound level at one cabin was 43 dBA, and 55 dBA at the other. Fort McKay was also assessed because it is the nearest community to the mine site. The sound level at Fort McKay was predicted to be 34 dBA. These results indicate that the sound level from Aurora Mine is not in compliance with the AEUB Noise Control Directive. Attenuation measures are required to reduce the noise to acceptable level at Cabin A and B. Predicted sound level at Fort McKay is lower than the permitted sound level

Impact assessment of ionising radiation in wildlife

International Nuclear Information System (INIS)

2001-01-01

This R and D project was commissioned by the Environment Agency and English Nature in January 2001 to provide up-to-date information on ionising radiation impact to wildlife, upon which a robust assessment approach may be developed. The methodology will provide an interim approach, whilst awaiting the outcome of the European Commission funded project 'Framework for Assessment of Environmental Impact' (FASSET) due to end in October 2003. The aims of the report were: to summarise the latest research on the behaviour, transfer and impact of ionising radiation effects on wildlife; to outline and review relevant European Directives which have impacted on the requirements to assess the impact to wildlife from ionising radiation in the UK; to consider the role of regulatory bodies in assessing the impact of ionising radiation on wildlife with respect to England and Wales; to make recommendations on the relative biological effectiveness of different types of radiation with respect to wildlife; and to recommend an approach with which to assess the 'scale of risk' to wildlife from the effects of ionising radiation, with spreadsheets to support the methodology. The report describes the behaviour and transfer of radionuclides in a number of different ecosystem types. Particular emphasis is placed on those ecosystems most likely to be impacted by the authorised discharges of radioactivity within the UK. As there is no international consensus on the approach to be taken to assess the impact of ionising radiation on wildlife, some countries have adopted their own legislation. The report evaluates these regulatory frameworks and describe the current UK position

Developments in UK defect assessment procedures R6 revision 4 and BS7910

International Nuclear Information System (INIS)

Sharples, J.K.; Ainsworth, R.A.; Budden, P.J.

2003-01-01

The R6 defect assessment procedures have been developed over many years by the UK nuclear power generation industry. The procedures are updated on a regular basis, taking into account the information resulting from the R6 development programme and other available information worldwide. A major revision, Revision 4, of the R6 procedures was released in 2000. Just prior to that release, in 1999, the British Standards flaw assessment procedure BS7910 was issued and combined and updated the previous published documents PD6493 and PD6539, for components operating at temperatures where creep was negligible and important, respectively. BS79l0 is also under constant development. This paper provides a brief overview of the BS7910 and R6 Revision 4 procedures and describes updates to the respective documents since they were first issued. Some ongoing developments which will lead to future revisions to the documents are also described. (author)

A National Needs Assessment to Identify Technical Procedures in Vascular Surgery for Simulation Based Training

DEFF Research Database (Denmark)

Nayahangan, L J; Konge, L; Schroeder, T V

2017-01-01

to identify technical procedures that vascular surgeons should learn. Round 2 was a survey that used a needs assessment formula to explore the frequency of procedures, the number of surgeons performing each procedure, risk and/or discomfort, and feasibility for simulation based training. Round 3 involved...... eliminated, resulting in a final prioritised list of 19 technical procedures. Conclusion A national needs assessment using a standardised Delphi method identified a list of procedures that are highly suitable and may provide the basis for future simulation based training programs for vascular surgeons......Objectives and background Practical skills training in vascular surgery is facing challenges because of an increased number of endovascular procedures and fewer open procedures, as well as a move away from the traditional principle of “learning by doing.” This change has established simulation...

A National Needs Assessment to Identify Technical Procedures in Vascular Surgery for Simulation Based Training.

Science.gov (United States)

Nayahangan, L J; Konge, L; Schroeder, T V; Paltved, C; Lindorff-Larsen, K G; Nielsen, B U; Eiberg, J P

2017-04-01

Practical skills training in vascular surgery is facing challenges because of an increased number of endovascular procedures and fewer open procedures, as well as a move away from the traditional principle of "learning by doing." This change has established simulation as a cornerstone in providing trainees with the necessary skills and competences. However, the development of simulation based programs often evolves based on available resources and equipment, reflecting convenience rather than a systematic educational plan. The objective of the present study was to perform a national needs assessment to identify the technical procedures that should be integrated in a simulation based curriculum. A national needs assessment using a Delphi process was initiated by engaging 33 predefined key persons in vascular surgery. Round 1 was a brainstorming phase to identify technical procedures that vascular surgeons should learn. Round 2 was a survey that used a needs assessment formula to explore the frequency of procedures, the number of surgeons performing each procedure, risk and/or discomfort, and feasibility for simulation based training. Round 3 involved elimination and ranking of procedures. The response rate for round 1 was 70%, with 36 procedures identified. Round 2 had a 76% response rate and resulted in a preliminary prioritised list after exploring the need for simulation based training. Round 3 had an 85% response rate; 17 procedures were eliminated, resulting in a final prioritised list of 19 technical procedures. A national needs assessment using a standardised Delphi method identified a list of procedures that are highly suitable and may provide the basis for future simulation based training programs for vascular surgeons in training. Copyright © 2017 European Society for Vascular Surgery. Published by Elsevier Ltd. All rights reserved.

Evaluating the effectiveness of impact assessment instruments

DEFF Research Database (Denmark)

Cashmore, Matthew; Richardson, Tim; Hilding-Ryedvik, Tuija

2010-01-01

to sharpen effectiveness evaluation theory for impact assessment instruments this article critically examines the neglected issue of their political constitution. Analytical examples are used to concretely explore the nature and significance of the politicisation of impact assessment. It is argued......The central role of impact assessment instruments globally in policy integration initiatives has been cemented in recent years. Associated with this trend, but also reflecting political emphasis on greater accountability in certain policy sectors and a renewed focus on economic competitiveness...... that raising awareness about the political character of impact assessment instruments, in itself, is a vital step in advancing effectiveness evaluation theory. Broader theoretical lessons on the framing of evaluation research are also drawn from the political analysis. We conclude that, at least within...

Public participation in Malawi's environmental impact assessment ...

African Journals Online (AJOL)

Since the adoption of the Environmental Management Act of 1996, Malawi has been using environmental impact assessment (EIA) as a tool for predicting and assessing the impact of development projects on the environment. This study assessed the extent of public participation in Malawi's EIA process. Desktop study of ...

The Implicit Relational Assessment Procedure as a Measure of Self-Esteem

Science.gov (United States)

Timko, C. Alix; England, Erica L.; Herbert, James D.; Forman, Evan M.

2010-01-01

Two studies were conducted to pilot the Implicit Relational Assessment Procedure (IRAP) in measuring attitudes toward the self: one related to body image specifically and another assessing the broader construct of self-esteem. Study 1 utilized the IRAP with female college students to examine self-referential beliefs regarding body image. Results…

Application of environmental impact assessment in Spain (1989-2008): the case of Road Projects

International Nuclear Information System (INIS)

Barbero Rodriguez, J.; Espigares Pinilla, T.

2010-01-01

In this study we analyze the application in Spain of the Environmental Impact Assessment (EIA) along the first 20 years since its implementation, paying special attention to road projects. We revised all Environmental Impact Statement (EISs) published during the period 1989-2008 and monitored, among others, the following variables; the record of decision (favorable or unfavorable) of the State Authority, the type of ecosystem affected by the projects and the mitigation measures required to the developer to implement the project. The results allow us to evaluate the effectiveness of EIA procedure for road projects and to suggest some practical recommendations to improve the quality of EISs. (Author) 13 refs.

Environmental impact assessment modern dressed? To the amendment of the EIA act and other acts and regulations

International Nuclear Information System (INIS)

Feldmann, Ulrike

2017-01-01

On 22 December 2016, the Federal Ministry for the Environment (BMUB) presented the ''Draft Act for the Modernization of the Act on the Environmental Impact Assessment'' within the framework of the association consultation, as well as the ''Draft first Ordinance Amending the Ordinance on the Approval Procedure - 9. BImSchV''. The EIA Modernization Act as well as the Atomic Act Procedure Regulation and the Federal Mining Act should be revised by terms of an omnibus act. The association consultation was held on 18 January 2017.

Assessment of Conventional Teaching Procedures: Implications for Gifted Learners

Science.gov (United States)

Alenizi, Mogbel Aid K.

2016-01-01

The present research aims to assess the conventional teaching procedures in the development of mathematical skills of the students with learning difficulties. The study group was made up of all the children with academic learning disorders in KSA. The research questions have been scrutinized from the averages and the standard deviation of the…

Innovative Approaches to Increasing the Student Assessment Procedures Effectiveness

Science.gov (United States)

Dorozhkin, Evgenij M.; Chelyshkova, Marina B.; Malygin, Alexey A.; Toymentseva, Irina A.; Anopchenko, Tatiana Y.

2016-01-01

The relevance of the investigated problem is determined by the need to improving the evaluation procedures in education and the student assessment in the age of the context of education widening, new modes of study developing (such as blending learning, e-learning, massive open online courses), immediate feedback necessity, reliable and valid…

A comparative assessment of alternative waste management procedures for selected reprocessing wastes

International Nuclear Information System (INIS)

Hickford, G.E.; Plews, M.J.

1983-07-01

This report, which has been prepared by Associated Nuclear Services for the Department of the Environment, presents the results of a study and comparative assessment of management procedures for low and intermediate level solid waste streams arising from current and future fuel reprocessing operations on the Sellafield site. The characteristics and origins of the wastes under study are discussed and a reference waste inventory is presented, based on published information. Waste management strategy in the UK and its implications for waste conditioning, packaging and disposal are discussed. Wastes currently arising which are not suitable for Drigg burial or sea dumping are stored in an untreated form. Work is in hand to provide additional and improved disposal facilities which will accommodate all the waste streams under study. For each waste stream viable procedures are identified for further assessment. The procedures comprise a series of on-site operations-recovery from storage, pre-treatment, treatment, encapsulation, and packaging, prior to storage or disposal of the conditioned waste form. Assessments and comparisons of each procedure for each waste are presented. These address various process, operational, economic, radiological and general safety factors. The results are presented in a series of tables with supporting text. For the majority of wastes direct encapsulation with minimal treatment appears to be a viable procedure. Occupational exposure and general safety are not identified as significant factors governing the choice of procedures. The conditioned wastes meet the general requirements for safe handling during storage and transportation. The less active wastes suitable for disposal by currently available routes meet the appropriate disposal criteria. It is not possible to consider in detail the suitability for disposal of the more active wastes for which disposal facilities are not yet available. (Author)

Sustainable Development Impacts of Nationally Appropriate Mitigation Actions: An integrated approach to assessment of co-benefits based on experience with the Clean Development Mechanism

DEFF Research Database (Denmark)

Olsen, Karen Holm

to assess the SD impacts of NAMAs. This paper argues for a new integrated approach to asses NAMAs' SD impacts that consists of SD indicators, procedures for stakeholder involvement and safeguards against negative impacts. The argument is based on a review of experience with the CDM’s contribution to SD......, particularly how a combined process and results approach known from the CDM SD Tool can be applied to develop a strong approach for SD assessment of NAMAs based on a comparison of similarities and differences between NAMAs and CDM. Five elements of a new approach towards assessment of NAMAs SD impacts...... are suggested based on emerging approaches and methodologies for monitoring, reporting and verification (MRV) of greenhouse gas reductions and SD impacts of NAMAs....

Psychomotor skills assessment in practicing surgeons experienced in performing advanced laparoscopic procedures.

Science.gov (United States)

Gallagher, Anthony G; Smith, C Daniel; Bowers, Steven P; Seymour, Neal E; Pearson, Adam; McNatt, Steven; Hananel, David; Satava, Richard M

2003-09-01

Minimally invasive surgery (MIS) has introduced a new and unique set of psychomotor skills for a surgeon to acquire and master. Although assessment technologies have been proposed, precise and objective psychomotor skills assessment of surgeons performing laparoscopic procedures has not been detailed. Two hundred ten surgeons attending the 2001 annual meeting of the American College of Surgeons in New Orleans who reported having completed more than 50 laparoscopic procedures participated. Subjects were required to complete one box-trainer laparoscopic cutting task and a similar virtual reality task. These tasks were specifically designed to test only psychomotor and not cognitive skills. Both tasks were completed twice. Performance of tasks was assessed and analyzed. Demographic and laparoscopic experience data were also collected. Complete data were available on 195 surgeons. In this group, surgeons performed the box-trainer task better with their dominant hand (p psychomotor skills is now possible. Surgeons who had performed more than 50 laparoscopic procedures showed considerable variability in their performance on a simple laparoscopic and virtual reality task. Approximately 10% of surgeons tested performed the task significantly worse than the group's average performance. Studies such as this may form the methodology for establishing criteria levels and performance objectives in objective assessment of the technical skills component of determining surgical competence.

Design procedure for pollutant loadings and impacts for highway stormwater runoff (Macintosh version) (for microcomputers). Software

International Nuclear Information System (INIS)

1990-01-01

The interactive computer program was developed to make a user friendly procedure for the personal computer for calculations and guidance to make estimations of pollutant loadings and impacts from highway stormwater runoff which are presented in the Publication FHWA-RD-88-006, Pollutant Loadings and Impacts from Highway Stormwater Runoff, Volume I: Design Procedure. The computer program is for the evaluation of the water quality impact from highway stormwater runoff to a lake or a stream from a specific highway site considering the necessary rainfall data and geographic site situation. The evaluation considers whether or not the resulting water quality conditions can cause a problem as indicated by the violations of water quality criteria or objectives

Design procedure for pollutant loadings and impacts for highway stormwater runoff (IBM version) (for microcomputers). Software

International Nuclear Information System (INIS)

1990-01-01

The interactive computer program was developed to make a user friendly procedure for the personal computer for calculations and guidance to make estimations of pollutant loadings and impacts from highway stormwater runoff which are presented in the Publication FHWA-RD-88-006, Pollutant Loadings and Impacts from Highway Stormwater Runoff, Volume I: Design Procedure. The computer program is for the evaluation of the water quality impact from highway stormwater runoff to a lake or a stream from a specific highway site considering the necessary rainfall data and geographic site situation. The evaluation considers whether or not the resulting water quality conditions can cause a problem as indicated by the violations of water quality criteria or objectives

Planning Environmental Impact Assessment Orienting Sustainable Development:Opportunities and Challenges

Institute of Scientific and Technical Information of China (English)

Sun Yanjun; Chen Xingeng; Bao Yun; Peng Xiaochun; Gao Changbo

2005-01-01

Strategic Environmental Assessment is a frontier subject in the field of Environmental Impact Assessment. In the past two decades, especially in recent years, much more importance has been attached to Strategic Environmental Assessment. The Environmental Impact Assessment Law of the P.R.China which was promulgated provides a great opportunity for the development of Planning Environmental Impact Assessment and brings great challenges for the development of traditional Project Environmental Impact Assessment and Planning Environmental Impact Assessment at the same time.In order to promote the implementation of"The EIA Law", the inherent limitations of Project Environmental Impact Assessment must be identified sufficiendy and the theory research and practice of Planning Environmental Impact Assessment should be strengthened as well. Measures should be taken currendy to enforce the operation system. The authors wish to offer a few references to the progress and implementation of Planning Environmental Impact Assessment in China.

Introducing Life Cycle Impact Assessment

DEFF Research Database (Denmark)

Hauschild, Michael Zwicky; Huijbregts, Mark AJ

2015-01-01

This chapter serves as an introduction to the presentation of the many aspects of life cycle impact assessment (LCIA) in this volume of the book series ‘LCA Compendium’. It starts with a brief historical overview of the development of life cycle impact assessment driven by numerous national LCIA...... methodology projects and presents the international scientific discussions and methodological consensus attempts in consecutive working groups under the auspices of the Society of Environmental Toxicology and Chemistry (SETAC) as well as the UNEP/ SETAC Life Cycle Initiative, and the (almost) parallel...

A state-impact-state methodology for assessing environmental impact in land use planning

International Nuclear Information System (INIS)

Chen, Longgao; Yang, Xiaoyan; Chen, Longqian; Potter, Rebecca; Li, Yingkui

2014-01-01

The implementation of land use planning (LUP) has a large impact on environmental quality. There lacks a widely accepted and consolidated approach to assess the LUP environmental impact using Strategic Environmental Assessment (SEA). In this paper, we developed a state-impact-state (SIS) model employed in the LUP environmental impact assessment (LUPEA). With the usage of Matter-element (ME) and Extenics method, the methodology based on the SIS model was established and applied in the LUPEA of Zoucheng County, China. The results show that: (1) this methodology provides an intuitive and easy understanding logical model for both the theoretical analysis and application of LUPEA; (2) the spatial multi-temporal assessment from base year, near-future year to planning target year suggests the positive impact on the environmental quality in the whole County despite certain environmental degradation in some towns; (3) besides the spatial assessment, other achievements including the environmental elements influenced by land use and their weights, the identification of key indicators in LUPEA, and the appropriate environmental mitigation measures were obtained; and (4) this methodology can be used to achieve multi-temporal assessment of LUP environmental impact of County or Town level in other areas. - Highlights: • A State-Impact-State model for Land Use Planning Environmental Assessment (LUPEA). • Matter-element (ME) and Extenics methods were embedded in the LUPEA. • The model was applied to the LUPEA of Zoucheng County. • The assessment shows improving environment quality since 2000 in Zoucheng County. • The method provides a useful tool for the LUPEA in the county level

A state-impact-state methodology for assessing environmental impact in land use planning

Energy Technology Data Exchange (ETDEWEB)

Chen, Longgao [Institute of land resources, Jiangsu Normal University, Xuzhou 221116 (China); Yang, Xiaoyan [Institute of land resources, Jiangsu Normal University, Xuzhou 221116 (China); School of Environmental Science and Spatial Informatics, China University of Mining and Technology, Xuzhou 221116 (China); Chen, Longqian, E-mail: cumt_chenlongqian@163.com [School of Environmental Science and Spatial Informatics, China University of Mining and Technology, Xuzhou 221116 (China); Potter, Rebecca; Li, Yingkui [Department of Geography, University of Tennessee, Knoxville, TN 37996 (United States)

2014-04-01

The implementation of land use planning (LUP) has a large impact on environmental quality. There lacks a widely accepted and consolidated approach to assess the LUP environmental impact using Strategic Environmental Assessment (SEA). In this paper, we developed a state-impact-state (SIS) model employed in the LUP environmental impact assessment (LUPEA). With the usage of Matter-element (ME) and Extenics method, the methodology based on the SIS model was established and applied in the LUPEA of Zoucheng County, China. The results show that: (1) this methodology provides an intuitive and easy understanding logical model for both the theoretical analysis and application of LUPEA; (2) the spatial multi-temporal assessment from base year, near-future year to planning target year suggests the positive impact on the environmental quality in the whole County despite certain environmental degradation in some towns; (3) besides the spatial assessment, other achievements including the environmental elements influenced by land use and their weights, the identification of key indicators in LUPEA, and the appropriate environmental mitigation measures were obtained; and (4) this methodology can be used to achieve multi-temporal assessment of LUP environmental impact of County or Town level in other areas. - Highlights: • A State-Impact-State model for Land Use Planning Environmental Assessment (LUPEA). • Matter-element (ME) and Extenics methods were embedded in the LUPEA. • The model was applied to the LUPEA of Zoucheng County. • The assessment shows improving environment quality since 2000 in Zoucheng County. • The method provides a useful tool for the LUPEA in the county level.

Generic procedures for assessment and response during a radiological emergency

International Nuclear Information System (INIS)

2000-08-01

One of the most important aspects of managing a radiological emergency is the ability to promptly and adequately determine and take actions to protect members of the public and emergency workers. Radiological accident assessment must take account of all critical information available at any time and must be an iterative and dynamic process aimed at reviewing the response as more detailed and complete information becomes available. This manual provides the tools, generic procedures and data needed for an initial response to a non-reactor radiological accident. This manual is one out of a set of IAEA publications on emergency preparedness and response, including Method for the Development of Emergency Response Preparedness for Nuclear or Radiological Accidents (IAEA-TECDOC-953), Generic Assessment Procedures for Determining Protective Actions During a Reactor Accident (IAEA-TECDOC-955) and Intervention Criteria in a Nuclear or Radiation Emergency (Safety Series No. 109)

Methodology for comparative assessment of various electricity generation systems using health and environmental impacts as the indicators

International Nuclear Information System (INIS)

Takahara, Shogo; Homma, Toshimitsu; Matsuki, Yoshio; Muramatsu, Ken

2010-12-01

This report describes the procedure of the comparative risk assessment, which is the standard approach to compare health and environmental impacts of different electricity generation systems, together with the results of the assessments and the international consensus. While there are several approaches to compare the impacts, the Impact Pathway (Damage Function) Approach is known as a popular method. This approach is characterized as the methodology that considers the emissions from power plants and the other sources, the dispersions of those pollutants, and then the impacts to the recipients of the pollutants; while, the scope of the assessments, such as types of the fuel chains as well as the time and the space of the impacts, needs to be defined upon the purpose, and the data and the model need to be justified through the process of the assessment. This approach was examined at the Coordinated Research Programme (hereinafter, 'CRP), which the International Atomic Energy Agency (hereinafter, 'IAEA) implemented with the research institutes of 12 countries on the comparative risk assessment. Upon the results of the assessments made by the CRP of the IAEA and the ExternE of the European Commission (hereinafter 'EC'), it is concluded that the impacts of the fossil fuel (coal, oil and natural gas) chains are relatively larger than of the other fuel chains, especially when the secondary chemical transformation of the pollutants and the effects of global warming are considered. On the contrary, the impacts of nuclear fuel cycle are smaller than of the fossil fuel chains'; although, there are still needs for further consensus building on the risks of the severe accidents and on the impacts of long-lived radio-nuclides spreading on the global level. (author)

Procedures and methods of benefit assessments for medicines in Germany.

Science.gov (United States)

Bekkering, Geertruida E; Kleijnen, Jos

2008-11-01

The Federal Joint Committee (FJC; Gemeinsamer Bundesausschuss, G-BA) defines the health-care elements that are to be reimbursed by sickness funds. To define a directive, the FJC can commission benefit assessments, which provide an overview of the scientific evidence regarding the efficacy and benefits of an intervention. This paper describes the operational implementation of the legal requirements with regard to the benefit assessments of medicines. Such benefit assessments are sometimes referred to as "isolated benefit assessments," to distinguish them from benefit assessments as part of a full economic evaluation.The FJC has the freedom to commission these assessments from any agency; however, to date the majority have commissioned the Institute for Quality and Efficiency in Health Care (IQWiG). Nevertheless, the content of this paper applies integrally to any institute commissioned for such assessments. In this report, 'the institute' is used when the text refers to any of these institutes.The legal framework for benefit assessments is laid out in the German Social Code Book version V ( http://www.sozialgesetzbuch.de ), Sects. 35b ( section 1), 139a ( section 4-6) and Sect. 139b ( section 3). It is specified that: The institute must guarantee high transparency. The institute must provide appropriate participation of relevant parties for the commission-related development of assessments, and opportunity for comment on all important segments of the assessment procedure. The institute has to report on the progress and results of the work at regular intervals. The institute is held to giving the commission to external experts. Based on the legal framework, the institute must guarantee a high procedural transparency. Transparency of the whole process should be achieved, which is evidenced by clear reporting of procedures and criteria in all phases undertaken in the benefit assessment. The most important means of enhancing transparency are: 1. To implement a scoping

[Procedures and methods of benefit assessments for medicines in Germany].

Science.gov (United States)

Bekkering, G E; Kleijnen, J

2008-12-01

The Federal Joint Committee (FJC; Gemeinsamer Bundesausschuss, G-BA) defines the health-care elements that are to be reimbursed by sickness funds. To define a directive, the FJC can commission benefit assessments, which provide an overview of the scientific evidence regarding the efficacy and benefits of an intervention. This paper describes the operational implementation of the legal requirements with regard to the benefit assessments of medicines. Such benefit assessments are sometimes referred to as "isolated benefit assessments," to distinguish them from benefit assessments as part of a full economic evaluation. The FJC has the freedom to commission these assessments from any agency; however, to date the majority have commissioned the Institute for Quality and Efficiency in Health Care (IQWiG). Nevertheless, the content of this paper applies integrally to any institute commissioned for such assessments. In this report, "the institute"' is used when the text refers to any of these institutes. The legal framework for benefit assessments is laid out in the German Social Code Book version V (http://www. sozialgesetzbuch.de), Sects. 35b ( section sign 1), 139a ( section sign 4-6) and Sect. 139b ( section sign 3). It is specified that: The institute must guarantee high transparency. The institute must provide appropriate participation of relevant parties for the commission-related development of assessments, and opportunity for comment on all important segments of the assessment procedure. The institute has to report on the progress and results of the work at regular intervals. The institute is held to giving the commission to external experts. Based on the legal framework, the institute must guarantee a high procedural transparency. Transparency of the whole process should be achieved, which is evidenced by clear reporting of procedures and criteria in all phases undertaken in the benefit assessment. The most important means of enhancing transparency are: 1. To

Radiation environmental impact assessment of copper exploitation

International Nuclear Information System (INIS)

Fan Guang; Wen Zhijian

2010-01-01

The radiation environmental impact of mineral exploitation on the surrounding environment has become a public concern. This paper presents the radiation environmental impact assessment of copper exploitation. Based on the project description and detailed investigations of surrounding environment, systematic radiation environmental impacts have been identified. The environmental impacts are assessed during both construction and operation phase. The environmental protection measures have also been proposed. The related conclusion and measures can play an active role in copper exploitation and environmental protection. (authors)

Creative potential: mental well-being impact assessment of the Liverpool 2008 European capital of culture programme.

Science.gov (United States)

West, H M; Scott-Samuel, A

2010-04-01

Culture has a number of potential impacts upon health and well-being. This project was undertaken to assess the potential impacts of the Liverpool 2008 European Capital of Culture programme upon mental well-being, so that positive effects can be maximized and negative impacts reduced, in order that health and well-being are promoted and inequalities are reduced. A mental well-being impact assessment (MWIA) toolkit has been developed, and was piloted in this study. MWIA uses a sequence of procedures designed to systematically assess the effect of projects, programmes and policies upon people's mental well-being and health. The MWIA toolkit was used to explore the potential positive and negative impacts on mental well-being of a sample of projects and policies from the European Capital of Culture programme. This was achieved by asking stakeholders to answer a series of questions, holding participative workshops, constructing a community profile and reviewing the research literature. Recommendations were developed which aim to enhance the impact of the programme on people's mental well-being. As expected, both positive and negative impacts of the European Capital of Culture programme on mental well-being were identified. Fourteen themes were identified as emerging from the workshops, screening and reviewing the research evidence. Based on these data, 33 recommendations were developed by the project steering group and have been presented to the Liverpool Culture Company. The process of conducting the assessment, particularly its participatory nature and its awareness-raising role, had impacts upon mental well-being. The findings demonstrate the potential for the Culture Company programme to have a profound impact upon mental well-being, and highlight areas which could be addressed to optimize the impact of the programme. 2010 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Generic assessment procedures for determining protective actions during a reactor accident

International Nuclear Information System (INIS)

1997-08-01

This manual provides the tools, procedures and data needed to evaluate the consequences of a nuclear accident occurring at a nuclear power plant throughout all phases of the emergency before, during and after a release of radioactive material. It is intended for use by on-site and off-site groups responsible for evaluating the accident consequences and making recommendations for the protection of the plant personnel, the emergency workers and the public. The scope of this manual is restricted to the technical assessment of radiological consequences. It does not address the emergency response infrastructure requirements, nor does it cover the emergency management aspects of accident assessment (e.g. reporting, staff qualification, shift replacement, and procedure implementation). The procedures and methods in this manual were developed based on a number of assumptions concerning the design and operation of the nuclear power plant and national practices. Therefore, this manual must be reviewed as part of the planning process to match the potential accidents, local conditions, national criteria and other unique characteristics of an area or nuclear reactor where it may be used. Refs, figs, tabs

Assessment of eye lens doses for workers during interventional radiology procedures

International Nuclear Information System (INIS)

Urboniene, A.; Sadzeviciene, E.; Ziliukas, J.

2015-01-01

The assessment of eye lens doses for workers during interventional radiology (IR) procedures was performed using a new eye lens dosemeter. In parallel, the results of routine individual monitoring were analysed and compared with the results obtained from measurements with a new eye lens dosemeter. The eye lens doses were assessed using H p (3) measured at the level of the eyes and were compared with H p (10) measured with the whole-body dosemeter above the lead collar. The information about use of protective measures, the number of performed interventional procedures per month and their fluoroscopy time was also collected. The assessment of doses to the lens of the eye was done for 50 IR workers at 9 Lithuanian hospitals for the period of 2012-2013. If the use of lead glasses is not taken into account, the estimated maximum annual dose equivalent to the lens of the eye was 82 mSv. (authors)

A procedure for safety assessment of components with cracks - Handbook. 3rd revised edition

Energy Technology Data Exchange (ETDEWEB)

Andersson, P.; Bergman, M.; Brickstad, B.; Dahlberg, L.; Nilsson, F.; Sattari-Far, I. [SAQ Kontroll AB, Stockholm (Sweden)

1999-12-01

In this handbook a procedure is described which can be used both for assessment of detected cracks or crack-like defects and for defect tolerance analysis. The procedure can be used to calculate possible crack growth due to fatigue or stress corrosion and to calculate the reserve margin for failure due to fracture and plastic collapse. For ductile materials, the procedure gives the reserve margin for initiation of stable crack growth. Thus, an extra reserve margin, unknown to size, exists for failure in components made of ductile materials. The procedure was developed for operative use with the following objectives in mind: a) The procedure should be able to handle both linear and non-linear problems without any a priori division. b) The procedure shall ensure uniqueness of the safety assessment. c) The procedure should be well defined and easy to use. d) The conservatism of the procedure should be well validated. e) The handbook, that documents the procedure, should be so complete that for most assessments, access to any other fracture mechanics literature should not be necessary. The method utilized in the procedure is based on the R6-method developed at Nuclear Electric plc. The basic assumption is that fracture initiated by a crack can be described by the variables K{sub r} and L{sub r}. K{sub r} is the ratio between the stress intensity factor and the fracture toughness of the material. L{sub r} is the ratio between applied load and the plastic limit load of the structure. The pair of calculated values of these variables is plotted in a diagram. If the point is situated within the noncritical region, fracture is assumed not to occur. If the point is situated outside the region, crack growth and fracture may occur. The method can in principal be used for all metallic materials. It is, however, more extensively verified for steel alloys only. The method is not intended for use in temperature regions where creep deformation is of importance. To fulfil the above

A procedure for safety assessment of components with cracks - Handbook. 3rd revised edition

International Nuclear Information System (INIS)

Andersson, P.; Bergman, M.; Brickstad, B.; Dahlberg, L.; Nilsson, F.; Sattari-Far, I.

1999-12-01

In this handbook a procedure is described which can be used both for assessment of detected cracks or crack-like defects and for defect tolerance analysis. The procedure can be used to calculate possible crack growth due to fatigue or stress corrosion and to calculate the reserve margin for failure due to fracture and plastic collapse. For ductile materials, the procedure gives the reserve margin for initiation of stable crack growth. Thus, an extra reserve margin, unknown to size, exists for failure in components made of ductile materials. The procedure was developed for operative use with the following objectives in mind: a) The procedure should be able to handle both linear and non-linear problems without any a priori division. b) The procedure shall ensure uniqueness of the safety assessment. c) The procedure should be well defined and easy to use. d) The conservatism of the procedure should be well validated. e) The handbook, that documents the procedure, should be so complete that for most assessments, access to any other fracture mechanics literature should not be necessary. The method utilized in the procedure is based on the R6-method developed at Nuclear Electric plc. The basic assumption is that fracture initiated by a crack can be described by the variables K r and L r . K r is the ratio between the stress intensity factor and the fracture toughness of the material. L r is the ratio between applied load and the plastic limit load of the structure. The pair of calculated values of these variables is plotted in a diagram. If the point is situated within the noncritical region, fracture is assumed not to occur. If the point is situated outside the region, crack growth and fracture may occur. The method can in principal be used for all metallic materials. It is, however, more extensively verified for steel alloys only. The method is not intended for use in temperature regions where creep deformation is of importance. To fulfil the above given objectives

Advanced structural integrity assessment procedures. Working material

International Nuclear Information System (INIS)

1994-01-01

The purpose of the meeting was to provide an international forum for discussion on recent results in research and utility practice in the field of methodology for the structural integrity assessment of components including relevant non-codified procedures. The scope of the meeting included deterministic and probabilistic approaches. The papers covered the following topics: Leak-before-break concepts; non-destructive examination (NDE) and surveillance results; statistical evaluation of non-destructive examination data; pressurized thermal shock evaluation; fatigue effects (including vibration); and verification qualification. The meeting was attended by 32 specialists from 8 countries. Refs, figs and tabs

A review of downscaling procedures - a contribution to the research on climate change impacts at city scale

Science.gov (United States)

Smid, Marek; Costa, Ana; Pebesma, Edzer; Granell, Carlos; Bhattacharya, Devanjan

2016-04-01

Human kind is currently predominantly urban based, and the majority of ever continuing population growth will take place in urban agglomerations. Urban systems are not only major drivers of climate change, but also the impact hot spots. Furthermore, climate change impacts are commonly managed at city scale. Therefore, assessing climate change impacts on urban systems is a very relevant subject of research. Climate and its impacts on all levels (local, meso and global scale) and also the inter-scale dependencies of those processes should be a subject to detail analysis. While global and regional projections of future climate are currently available, local-scale information is lacking. Hence, statistical downscaling methodologies represent a potentially efficient way to help to close this gap. In general, the methodological reviews of downscaling procedures cover the various methods according to their application (e.g. downscaling for the hydrological modelling). Some of the most recent and comprehensive studies, such as the ESSEM COST Action ES1102 (VALUE), use the concept of Perfect Prog and MOS. Other examples of classification schemes of downscaling techniques consider three main categories: linear methods, weather classifications and weather generators. Downscaling and climate modelling represent a multidisciplinary field, where researchers from various backgrounds intersect their efforts, resulting in specific terminology, which may be somewhat confusing. For instance, the Polynomial Regression (also called the Surface Trend Analysis) is a statistical technique. In the context of the spatial interpolation procedures, it is commonly classified as a deterministic technique, and kriging approaches are classified as stochastic. Furthermore, the terms "statistical" and "stochastic" (frequently used as names of sub-classes in downscaling methodological reviews) are not always considered as synonymous, even though both terms could be seen as identical since they are

Methods for land use impact assessment: A review

International Nuclear Information System (INIS)

Perminova, Tataina; Sirina, Natalia; Laratte, Bertrand; Baranovskaya, Natalia; Rikhvanov, Leonid

2016-01-01

Many types of methods to assess land use impact have been developed. Nevertheless a systematic synthesis of all these approaches is necessary to highlight the most commonly used and most effective methods. Given the growing interest in this area of research, a review of the different methods of assessing land use impact (LUI) was performed using bibliometric analysis. One hundred eighty seven articles of agricultural and biological science, and environmental sciences were examined. According to our results, the most frequently used land use assessment methods are Life-Cycle Assessment, Material Flow Analysis/Input–Output Analysis, Environmental Impact Assessment and Ecological Footprint. Comparison of the methods allowed their specific features to be identified and to arrive at the conclusion that a combination of several methods is the best basis for a comprehensive analysis of land use impact assessment. - Highlights: • We identified the most frequently used methods in land use impact assessment. • A comparison of the methods based on several criteria was carried out. • Agricultural land use is by far the most common area of study within the methods. • Incentive driven methods, like LCA, arouse the most interest in this field.

Methods for land use impact assessment: A review

Energy Technology Data Exchange (ETDEWEB)

Perminova, Tataina, E-mail: tatiana.perminova@utt.fr [Research Centre for Environmental Studies and Sustainability, University of Technology of Troyes, CNRS UMR 6281, 12 Rue Marie Curie CS 42060, F-10004 Troyes Cedex (France); Department of Geoecology and Geochemistry, Institute of Natural Resources, National Research Tomsk Polytechnic University, 30 Lenin Avenue, 634050 Tomsk (Russian Federation); Sirina, Natalia, E-mail: natalia.sirina@utt.fr [Research Centre for Environmental Studies and Sustainability, University of Technology of Troyes, CNRS UMR 6281, 12 Rue Marie Curie CS 42060, F-10004 Troyes Cedex (France); Laratte, Bertrand, E-mail: bertrand.laratte@utt.fr [Research Centre for Environmental Studies and Sustainability, University of Technology of Troyes, CNRS UMR 6281, 12 Rue Marie Curie CS 42060, F-10004 Troyes Cedex (France); Baranovskaya, Natalia, E-mail: natalya.baranovs@mail.ru [Department of Geoecology and Geochemistry, Institute of Natural Resources, National Research Tomsk Polytechnic University, 30 Lenin Avenue, 634050 Tomsk (Russian Federation); Rikhvanov, Leonid, E-mail: rikhvanov@tpu.ru [Department of Geoecology and Geochemistry, Institute of Natural Resources, National Research Tomsk Polytechnic University, 30 Lenin Avenue, 634050 Tomsk (Russian Federation)

2016-09-15

Many types of methods to assess land use impact have been developed. Nevertheless a systematic synthesis of all these approaches is necessary to highlight the most commonly used and most effective methods. Given the growing interest in this area of research, a review of the different methods of assessing land use impact (LUI) was performed using bibliometric analysis. One hundred eighty seven articles of agricultural and biological science, and environmental sciences were examined. According to our results, the most frequently used land use assessment methods are Life-Cycle Assessment, Material Flow Analysis/Input–Output Analysis, Environmental Impact Assessment and Ecological Footprint. Comparison of the methods allowed their specific features to be identified and to arrive at the conclusion that a combination of several methods is the best basis for a comprehensive analysis of land use impact assessment. - Highlights: • We identified the most frequently used methods in land use impact assessment. • A comparison of the methods based on several criteria was carried out. • Agricultural land use is by far the most common area of study within the methods. • Incentive driven methods, like LCA, arouse the most interest in this field.

Health impact assessment in Korea

International Nuclear Information System (INIS)

Kang, Eunjeong; Lee, Youngsoo; Harris, Patrick; Koh, Kwangwook; Kim, Keonyeop

2011-01-01

Recently, Health Impact Assessment has gained great attention in Korea. First, the Ministry of Environment introduced HIA within existing Environment Impact Assessment. Second, the Korea Institute for Health and Social Affairs began an HIA program in 2008 in alliance with Healthy Cities. In this short report, these two different efforts are introduced and their opportunities and challenges discussed. We believe these two approaches complement each other and both need to be strengthened. We also believe that both can contribute to the development of health in policy and project development and ultimately to improvements in the Korean population's health.

E-IMPACT - A ROBUST HAZARD-BASED ENVIRONMENTAL IMPACT ASSESSMENT APPROACH FOR PROCESS INDUSTRIES

Directory of Open Access Journals (Sweden)

KHANDOKER A. HOSSAIN

2008-04-01

Full Text Available This paper proposes a hazard-based environmental impact assessment approach (E-Impact, for evaluating the environmental impact during process design and retrofit stages. E-Impact replaces the normalisation step of the conventional impact assessment phase. This approach compares the impact scores for different options and assigns a relative score to each option. This eliminates the complexity of the normalisation step in the evaluation phase. The applicability of the E-Impact has been illustrated through a case study of solvent selection in an acrylic acid manufacturing plant. E-Impact is used in conjunction with Aspen-HYSYS process simulator to develop mass and heat balance data.

Clinical skills assessment of procedural and advanced communication skills: performance expectations of residency program directors

Science.gov (United States)

Langenau, Erik E.; Zhang, Xiuyuan; Roberts, William L.; DeChamplain, Andre F.; Boulet, John R.

2012-01-01

Background High stakes medical licensing programs are planning to augment and adapt current examinations to be relevant for a two-decision point model for licensure: entry into supervised practice and entry into unsupervised practice. Therefore, identifying which skills should be assessed at each decision point is critical for informing examination development, and gathering input from residency program directors is important. Methods Using data from previously developed surveys and expert panels, a web-delivered survey was distributed to 3,443 residency program directors. For each of the 28 procedural and 18 advanced communication skills, program directors were asked which clinical skills should be assessed, by whom, when, and how. Descriptive statistics were collected, and Intraclass Correlations (ICC) were conducted to determine consistency across different specialties. Results Among 347 respondents, program directors reported that all advanced communication and some procedural tasks are important to assess. The following procedures were considered ‘important’ or ‘extremely important’ to assess: sterile technique (93.8%), advanced cardiovascular life support (ACLS) (91.1%), basic life support (BLS) (90.0%), interpretation of electrocardiogram (89.4%) and blood gas (88.7%). Program directors reported that most clinical skills should be assessed at the end of the first year of residency (or later) and not before graduation from medical school. A minority were considered important to assess prior to the start of residency training: demonstration of respectfulness (64%), sterile technique (67.2%), BLS (68.9%), ACLS (65.9%) and phlebotomy (63.5%). Discussion Results from this study support that assessing procedural skills such as cardiac resuscitation, sterile technique, and phlebotomy would be amenable to assessment at the end of medical school, but most procedural and advanced communications skills would be amenable to assessment at the end of the first

Regional analysis and environmental impact assessment

International Nuclear Information System (INIS)

Parzyck, D.C.; Brocksen, R.W.; Emanuel, W.R.

1976-01-01

This paper presents a number of techniques that can be used to assess environmental impacts on a regional scale. Regional methodologies have been developed which examine impacts upon aquatic and terrestrial biota in regions through consideration of changes in land use, land cover, air quality, water resource use, and water quality. Techniques used to assess long-range atmospheric transport, water resources, effects on sensitive forest and animal species, and impacts on man are presented in this paper, along with an optimization approach which serves to integrate the analytical techniques in an overall assessment framework. A brief review of the research approach and certain modeling techniques used within one regional studies program is provided. While it is not an all inclusive report on regional analyses, it does present an illustration of the types of analyses that can be performed on a regional scale

Generic models for use in assessing the impact of discharges of radioactive substances to the environment

International Nuclear Information System (INIS)

2001-01-01

The concern of society in general for the quality of the environment and the realization that all human activities have some environmental effect has led to the development of a procedure for environmental impact analysis. This procedure is a predictive one, which forecasts probable environmental effects before some action, such as the construction and operation of a nuclear power station, is decided upon. The method of prediction is by the application of models that describe the environmental processes in mathematical terms in order to produce a quantitative result which can be used in the decision making process. This report describes such a procedure for application to radioactive discharges and is addressed to the national regulatory bodies and technical and administrative personnel responsible for performing environmental impact analyses. The report is also intended to support the recently published IAEA Safety Guide on Regulatory Control of Radioactive Discharges to the Environment. It expands on and supersedes previous advice published in IAEA Safety Series No. 57 on Generic Models and Parameters for Assessing the Environmental Transfer of Radionuclides from Routine Releases. This Safety Report was developed through a series of consultants meetings and three Advisory Group Meetings

Probabilistic assessment of flaw evaluation procedures for pressure vessel integrity

International Nuclear Information System (INIS)

Shaffer, D.H.; Bamford, W.H.; Jouris, G.M.

1980-01-01

Prudent design procedures, in order to err in the direction of conservative over-strength rather than risky under-strength, have taken bounding values rather than best estimates for material parameters, and wherever possible, used conservative input for the calculations. The growing data base for this work is now beginning to allow an assessment of the conservatism that has been incorporated into the design procedure. Quantitative estimates of the variability associated with crack growth rates and fracture toughness have been generated in connection with other studies, and it would be useful to incorporate such information into an overall assessment of the design margins that are prescribed. In addition to getting an estimate of the conservatism in the current procedure, this study should provide a useful insight into the relative degree of margin that is introduced at each stage of the flaw evaluation process. Identification of the step by step margins should lead to more effective data collection programs from which information for adequately controlling the design conservatism can be obtained. The study will also provide valuable guidance in fixing revised design reference curves and safety factors so that adequate overall margins can be maintained without excess conservatism. This study is limited to vessel rupture in a brittle mode, and examples for illustration are particularly related to the beltline region of a reactor pressure vessel. The methodology, however, is applicable to all regions for which the required stress analyses, operating history, and material parameters are available. The work being carried out here is in consonance with ASME Section XI on Flaw Evaluation Procedures. It is concerned both with flaws under normal operating conditions and flaws under faulted conditions. (author)

34 CFR 75.601 - Applicant's assessment of environmental impact.

Science.gov (United States)

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false Applicant's assessment of environmental impact. 75.601... Conditions Must Be Met by a Grantee? Construction § 75.601 Applicant's assessment of environmental impact. An applicant shall include with its application its assessment of the impact of the proposed construction on...

Developing best practices teaching procedures for skinfold assessment: observational examination using the Think Aloud method.

Science.gov (United States)

Holmstrup, Michael E; Verba, Steven D; Lynn, Jeffrey S

2015-12-01

Skinfold assessment is valid and economical; however, it has a steep learning curve, and many programs only include one exposure to the technique. Increasing the number of exposures to skinfold assessment within an undergraduate curriculum would likely increase skill proficiency. The present study combined observational and Think Aloud methodologies to quantify procedural and cognitive characteristics of skinfold assessment. It was hypothesized that 1) increased curricular exposure to skinfold assessment would improve proficiency and 2) the combination of an observational and Think Aloud analysis would provide quantifiable areas of emphasis for instructing skinfold assessment. Seventy-five undergraduates with varied curricular exposure performed a seven-site skinfold assessment on a test subject while expressing their thoughts aloud. A trained practitioner recorded procedural observations, with transcripts generated from audio recordings to capture cognitive information. Skinfold measurements were compared with a criterion value, and bias scores were generated. Participants whose total bias fell within ±3.5% of the criterion value were proficient, with the remainder nonproficient. An independent-samples t-test was used to compare procedural and cognitive observations across experience and proficiency groups. Additional curricular exposure improved performance of skinfold assessment in areas such as the measurement of specific sites (e.g., chest, abdomen, and thigh) and procedural (e.g., landmark identification) and cognitive skills (e.g., complete site explanation). Furthermore, the Think Aloud method is a valuable tool for determining curricular strengths and weaknesses with skinfold assessment and as a pedagogical tool for individual instruction and feedback in the classroom. Copyright © 2015 The American Physiological Society.

Ecological impact assessment

International Nuclear Information System (INIS)

Thomas, J.M.; Eberhardt, L.L.

1975-01-01

Quantitative problems in accomplishing ecological impact assessment with particular reference to defining population effects are discussed with some comments on the two approaches most commonly used, e.g., the experimental and simulation models. Some alternatives are suggested because both methods will probably fail to detect real population effects mostly due to poor understanding of ecosystems or because of the limitations inherent in field census methods. Most judgments of ecological impact are not quantitatively defensible but are qualitative, subjective, or political in nature. An examination of aggregates of data from various nuclear power plant sites may be one way to obtain enough replication to judge ecological impact. Thus, currently available data from such studies as well as appropriate demographic, vegetation, census, and bibliographic material could offer an interesting challenge to computer professionals if such an undertaking were contemplated. Present research programs at PNL and computer involvement are described. Future possibilities and directions are discussed. (U.S.)

Randomised controlled trial to assess the effect of a Just-in-Time training on procedural performance: a proof-of-concept study to address procedural skill decay.

Science.gov (United States)

Branzetti, Jeremy B; Adedipe, Adeyinka A; Gittinger, Matthew J; Rosenman, Elizabeth D; Brolliar, Sarah; Chipman, Anne K; Grand, James A; Fernandez, Rosemarie

2017-11-01

A subset of high-risk procedures present significant safety threats due to their (1) infrequent occurrence, (2) execution under time constraints and (3) immediate necessity for patient survival. A Just-in-Time (JIT) intervention could provide real-time bedside guidance to improve high-risk procedural performance and address procedural deficits associated with skill decay. To evaluate the impact of a novel JIT intervention on transvenous pacemaker (TVP) placement during a simulated patient event. This was a prospective, randomised controlled study to determine the effect of a JIT intervention on performance of TVP placement. Subjects included board-certified emergency medicine physicians from two hospitals. The JIT intervention consisted of a portable, bedside computer-based procedural adjunct. The primary outcome was performance during a simulated patient encounter requiring TVP placement, as assessed by trained raters using a technical skills checklist. Secondary outcomes included global performance ratings, time to TVP placement, number of critical omissions and System Usability Scale scores (intervention only). Groups were similar at baseline across all outcomes. Compared with the control group, the intervention group demonstrated statistically significant improvement in the technical checklist score (11.45 vs 23.44, p<0.001, Cohen's d effect size 4.64), the global rating scale (2.27 vs 4.54, p<0.001, Cohen's d effect size 3.76), and a statistically significant reduction in critical omissions (2.23 vs 0.68, p<0.001, Cohen's d effect size -1.86). The difference in time to procedural completion was not statistically significant between conditions (11.15 min vs 12.80 min, p=0.12, Cohen's d effect size 0.65). System Usability Scale scores demonstrated excellent usability. A JIT intervention improved procedure perfromance, suggesting a role for JIT interventions in rarely performed procedures. © Article author(s) (or their employer(s) unless otherwise stated in

Environmental impact assessment in the Nordic Countries

International Nuclear Information System (INIS)

Broden, K.; Palsson, S.E.; Poroddsson, P.

2000-12-01

A meeting on Environmental Impact Assessment has been held in Iceland, September 2-6, 2000. It was held within the framework of the project NKS/SOS-3 (Radioactive waste), subproject NKS/SOS-3.1 (Environmental Impact Assessment). The meeting included presentations, discussions and a study trip to the Egilsstadir and Myvatn districts. (au)

Life cycle assessment perspectives on delivering an infant in the US

International Nuclear Information System (INIS)

Campion, Nicole; Thiel, Cassandra L.; DeBlois, Justin; Woods, Noe C.; Landis, Amy E.; Bilec, Melissa M.

2012-01-01

This study introduces life cycle assessment as a tool to analyze one aspect of sustainability in healthcare: the birth of a baby. The process life cycle assessment case study presented evaluates two common procedures in a hospital, a cesarean section and a vaginal birth. This case study was conducted at Magee-Womens Hospital of the University of Pittsburgh Medical Center, which delivers over 10,000 infants per year. The results show that heating, ventilation, and air conditioning (HVAC), waste disposal, and the production of the disposable custom packs comprise a large percentage of the environmental impacts. Applying the life cycle assessment tool to medical procedures allows hospital decision makers to target and guide efforts to reduce the environmental impacts of healthcare procedures. - Highlights: ► Life cycle assessment helps identify the environmental impacts of medical procedures. ► Disposable custom packs represent a large portion of environmental impacts of births. ► Electricity loading contributes to global warming potential and respiratory effects. ► Impact improvements should focus on heating, ventilation, and air conditioning and disposable custom packs.

European project for developing general guidelines for harmonising internal dose assessment procedures (IDEAS)

International Nuclear Information System (INIS)

Andrasi, A.; Bailey, M.; Puncher, M.; Berkovski, V.; Eric Blanchardon, E.; Jourdain, J.-R.; Carlo-Maria Castellani, C.-M.; Doerfel, H.; Christian Hurtgen, Ch.; Le Guen, B.

2003-01-01

Several international intercomparison exercises on intake and internal dose assessments from monitoring data led to the conclusion that the results calculated by different participants varied significantly mainly because of the wide variety of methods and assumptions applied in the assessment procedure. Based on these experiences the need for harmonisation of the procedures has been formulated as an EU research project under the 5 th Framework Programme (2001-2005), with the aim of developing general guidelines for standardising assessments of intakes and internal doses. In the IDEAS project eight institutions from seven European countries are participating using inputs also from internal dosimetry professionals from across Europe to ensure broad consensus in the outcome of the project. The IDEAS project is explained

Sensitivity to Uncertainty in Asteroid Impact Risk Assessment

Science.gov (United States)

Mathias, D.; Wheeler, L.; Prabhu, D. K.; Aftosmis, M.; Dotson, J.; Robertson, D. K.

2015-12-01

The Engineering Risk Assessment (ERA) team at NASA Ames Research Center is developing a physics-based impact risk model for probabilistically assessing threats from potential asteroid impacts on Earth. The model integrates probabilistic sampling of asteroid parameter ranges with physics-based analyses of entry, breakup, and impact to estimate damage areas and casualties from various impact scenarios. Assessing these threats is a highly coupled, dynamic problem involving significant uncertainties in the range of expected asteroid characteristics, how those characteristics may affect the level of damage, and the fidelity of various modeling approaches and assumptions. The presented model is used to explore the sensitivity of impact risk estimates to these uncertainties in order to gain insight into what additional data or modeling refinements are most important for producing effective, meaningful risk assessments. In the extreme cases of very small or very large impacts, the results are generally insensitive to many of the characterization and modeling assumptions. However, the nature of the sensitivity can change across moderate-sized impacts. Results will focus on the value of additional information in this critical, mid-size range, and how this additional data can support more robust mitigation decisions.

Assessing the impacts of climate change on natural resource systems

Energy Technology Data Exchange (ETDEWEB)

Frederick, K.D.; Rosenberg, N.J. [eds.

1994-11-30

This volume is a collection of papers addressing the theme of potential impacts of climatic change. Papers are entitled Integrated Assessments of the Impacts of Climatic Change on Natural Resources: An Introductory Editorial; Framework for Integrated Assessments of Global Warming Impacts; Modeling Land Use and Cover as Part of Global Environmental Change; Assessing Impacts of Climatic Change on Forests: The State of Biological Modeling; Integrating Climatic Change and Forests: Economic and Ecological Assessments; Environmental Change in Grasslands: Assessment using Models; Assessing the Socio-economic Impacts of Climatic Change on Grazinglands; Modeling the Effects of Climatic Change on Water Resources- A Review; Assessing the Socioeconomic Consequences of Climate Change on Water Resources; and Conclusions, Remaining Issues, and Next Steps.

A Methodology for Safety Culture Impact Assessment

Energy Technology Data Exchange (ETDEWEB)

Han, Kiyoon; Jae, Moosung [Hanyang Univ., Seoul (Korea, Republic of)

2014-05-15

The purpose of this study is to develop methodology for assessing safety culture impact on nuclear power plants. A new methodology for assessing safety culture impact index has been developed and applied for the reference nuclear power plants. The developed SCII model might contribute to comparing the level of safety culture among nuclear power plants as well as to improving the safety of nuclear power plants. Safety culture is defined to be fundamental attitudes and behaviors of the plant staff which demonstrate that nuclear safety is the most important consideration in all activities conducted in nuclear power operation. Through several accidents of nuclear power plant including the Fukusima Daiichi in 2011 and Chernovyl accidents in 1986, the safety of nuclear power plant is emerging into a matter of interest. From the accident review report, it can be easily found out that safety culture is important and one of dominant contributors to accidents. However, the impact methodology for assessing safety culture has not been established analytically yet. It is difficult to develop the methodology for assessing safety culture impact quantitatively.

A Methodology for Safety Culture Impact Assessment

International Nuclear Information System (INIS)

Han, Kiyoon; Jae, Moosung

2014-01-01

The purpose of this study is to develop methodology for assessing safety culture impact on nuclear power plants. A new methodology for assessing safety culture impact index has been developed and applied for the reference nuclear power plants. The developed SCII model might contribute to comparing the level of safety culture among nuclear power plants as well as to improving the safety of nuclear power plants. Safety culture is defined to be fundamental attitudes and behaviors of the plant staff which demonstrate that nuclear safety is the most important consideration in all activities conducted in nuclear power operation. Through several accidents of nuclear power plant including the Fukusima Daiichi in 2011 and Chernovyl accidents in 1986, the safety of nuclear power plant is emerging into a matter of interest. From the accident review report, it can be easily found out that safety culture is important and one of dominant contributors to accidents. However, the impact methodology for assessing safety culture has not been established analytically yet. It is difficult to develop the methodology for assessing safety culture impact quantitatively

Phantoms for quality control procedures in digital breast tomosynthesis: dose assessment

NARCIS (Netherlands)

Bouwman, R. W.; Diaz, O.; van Engen, R. E.; Young, K. C.; den Heeten, G. J.; Broeders, M. J. M.; Veldkamp, W. J. H.; Dance, D. R.

2013-01-01

The recent introduction of digital breast tomosynthesis into clinical practice requires quality control procedures. In this study we have investigated whether the assessment of the average glandular dose for modelled standard breasts can be performed using a combination of polymethyl methacrylate

Methodology for Environmental Impact Assessment; Metodik foer miljoekonsekvensbedoemning

Energy Technology Data Exchange (ETDEWEB)

Malmlund, Anna (Structor Miljoebyraan Stockholm AB (Sweden))

2010-12-15

This report is an appendix to 'Environmental Impact Assessment Interim storage, encapsulation and disposal of spent nuclear fuel'. The appendix presents the methodology and criteria used in support investigations to conduct impact assessments.

Impact assessment and policy learning in the European Commission

International Nuclear Information System (INIS)

Ruddy, Thomas F.; Hilty, Lorenz M.

2008-01-01

Governance for sustainable development requires policy coherence and Environmental Policy Integration, which are being hindered by difficulties coordinating the two separate impact assessment processes being conducted in the European Commission. One of them, the Commission-wide Impact Assessment process, looks primarily at EU-internal impacts, whereas the other one, Sustainability Impact Assessment (SIA) in DG Trade, looks outward to other countries and intergovernmental organizations. Ideally, the two processes should complement one another, especially as the two are set to continue being done in parallel. The paper uses a case study of the reform of the European sugar regime under a World Trade Organization ruling to demonstrate how the two impact assessment processes could better complement one another. Feedback from the experience had with existing trade agreements could then promote policy learning and inform the negotiations on new agreements. The number of new bilateral and Regional Trade Agreements is expected to continue rising, thus increasing the importance of the Commission-wide Impact Assessment process required for them

Incorporating mesh-insensitive structural stress into the fatigue assessment procedure of common structural rules for bulk carriers

Directory of Open Access Journals (Sweden)

Seong-Min Kim

2015-01-01

Full Text Available This study introduces a fatigue assessment procedure using mesh-insensitive structural stress method based on the Common Structural Rules for Bulk Carriers by considering important factors, such as mean stress and thickness effects. The fatigue assessment result of mesh-insensitive structural stress method have been compared with CSR procedure based on equivalent notch stress at major hot spot points in the area near the ballast hold for a 180 K bulk carrier. The possibility of implementing mesh-insensitive structural stress method in the fatigue assessment procedure for ship structures is discussed.

Assessing Impact Submissions for REF 2014: An Evaluation

Science.gov (United States)

Manville, Catriona; Guthrie, Susan; Henham, Marie-Louise; Garrod, Bryn; Sousa, Sonia; Kirtley, Anne; Castle-Clarke, Sophie; Ling, Tom

2015-01-01

The Research Excellence Framework (REF) is a new system for assessing the quality of research in UK higher education institutions (HEIs). For the first time, part of the assessment included the wider impact of research. RAND Europe was commissioned to evaluate the assessment process of the impact element of REF submissions, and to explore the…

AN OVERVIEW OF SWEDISH RESEARCH ON IMPACT ASSESSMENT

OpenAIRE

CHARLOTTA FAITH-ELL

2015-01-01

This statement aims at giving an overview of the research on impact assessment in Sweden. It takes a point of departure at the introduction of impact assessment in 1991 describing the Swedish research until today. Since the introduction of EIA in the Swedish legislation in the 1990s, a large number of PhD dissertations have been dealing with various aspects of impact assessment. An estimation based on the literature search is that about 20 PhD theses, in which the core of the research is rela...

Road safety impact assessment RIA : a proposal for tools and procedures for a RIA. A study commissioned by the European Commission DG VII.

NARCIS (Netherlands)

Wegman, F.C.M. Roszbach, R. Mulder, J.A.G. Schoon, C.C. & Poppe, F.

1994-01-01

This study develops a Road Safety Impact Assessment (RIA) tool. RIAs could be made on a more strategic level, and on an individual project or scheme level. On a strategic level, the study suggests to assess safety consequences of changes of traffic over a road network due to infrastructural projects

LCA of contaminated site remediation - integration of site-specific impact assessment of local toxic impacts

DEFF Research Database (Denmark)

Lemming, Gitte; Hauschild, Michael Zwicky; Chambon, Julie Claire Claudia

2011-01-01

impacts have typically been assessed using site-generic characterization models representing a continental scale and excluding the groundwater compartment. Soil contaminants have therefore generally been assigned as emissions to surface soil or surface water compartments. However, such site-generic...... assessments poorly reflect the fate of frequent soil contaminants such as chloroethenes as they exclude the groundwater compartment and assume that the main part escapes to the atmosphere. Another important limitation of the generic impact assessment models is that they do not include the formation......The environmental impacts from remediation can be divided into primary and secondary impacts. Primary impacts cover the local impacts associated with the on-site contamination, whereas the secondary impacts are impacts on the local, regional and global scale generated by the remediation activities...

IRS/TUEV activities during the licensing procedure. Safety assessment and preexamination

International Nuclear Information System (INIS)

Fendler, H.

1976-01-01

Short summary about the IRS/TUEV activities in the licensing procedure for a nuclear power plant: work for assessments, for pre-examination and approval specifications and drawings and for the quality control, time and the manpower necessary for this work. (orig./HP) [de

Scenario Development and Delphi Application in Life Cycle Assessment for Assessing Environmental Impact of New Technology Case Study: Removal of Wind Turbines Project

Directory of Open Access Journals (Sweden)

Devina Fitrika Dewi

2016-05-01

Full Text Available Certain technology is intended to create eco-efficient products or process or is developed as answer to the recent challenge. This kind of technology consequently can also create another impact therefore it shall be assessed and analyzed.The focus of the study is on assessment method namely Life Cycle Analysis (LCA, Scenario development and Delphi application. The objective is to understand benefits and drawbacks of the combined methodology and observe practicality of its implementation for assessing new technology. The distinctive feature comes from the combination of social and technological foresight (as Delphi application and future studies (as Scenario development which are applied in the environmental assessment of a product (by Life Cycle Analysis.The utilization of LCA-Scenario-Delphi case study as an explanatory example is presented in the Removal Wind Turbines Project by the Danish Energy Agency. The wind turbine is considered new technology with some of it phases are yet to occur, for example: removal of turbines after phase out stage. Technology Assessment by LCA-Scenario-Delphi is complicated procedure, but necessary to validate the results. The drawbacks of this procedure are extensive time it consumes and the dependency on public participation and/or expert willingness to participate. Nonetheless, its advantages are due to its interactive feature; integration of knowledge from different areas of expertise and its assessment’s characteristic which focuses on process.

Efficiency of performing pulmonary procedures in a shared endoscopy unit: procedure time, turnaround time, delays, and procedure waiting time.

Science.gov (United States)

Verma, Akash; Lee, Mui Yok; Wang, Chunhong; Hussein, Nurmalah B M; Selvi, Kalai; Tee, Augustine

2014-04-01

The purpose of this study was to assess the efficiency of performing pulmonary procedures in the endoscopy unit in a large teaching hospital. A prospective study from May 20 to July 19, 2013, was designed. The main outcome measures were procedure delays and their reasons, duration of procedural steps starting from patient's arrival to endoscopy unit, turnaround time, total case durations, and procedure wait time. A total of 65 procedures were observed. The most common procedure was BAL (61%) followed by TBLB (31%). Overall procedures for 35 (53.8%) of 65 patients were delayed by ≥ 30 minutes, 21/35 (60%) because of "spillover" of the gastrointestinal and surgical cases into the time block of pulmonary procedure. Time elapsed between end of pulmonary procedure and start of the next procedure was ≥ 30 minutes in 8/51 (16%) of cases. In 18/51 (35%) patients there was no next case in the room after completion of the pulmonary procedure. The average idle time of the room after the end of pulmonary procedure and start of next case or end of shift at 5:00 PM if no next case was 58 ± 53 minutes. In 17/51 (33%) patients the room's idle time was >60 minutes. A total of 52.3% of patients had the wait time >2 days and 11% had it ≥ 6 days, reason in 15/21 (71%) being unavailability of the slot. Most pulmonary procedures were delayed due to spillover of the gastrointestinal and surgical cases into the block time allocated to pulmonary procedures. The most common reason for difficulty encountered in scheduling the pulmonary procedure was slot unavailability. This caused increased procedure waiting time. The strategies to reduce procedure delays and turnaround times, along with improved scheduling methods, may have a favorable impact on the volume of procedures performed in the unit thereby optimizing the existing resources.

Application for approval of the Cold Lake Expansion Project: volume 2: environmental impact assessment: Part 1: biophysical and resource use assessment. Part 2: impact model descriptions

International Nuclear Information System (INIS)

Green, J.; Eccles, R.; Hegmann, G.; Morrison, L.; Salter, R.; van Egmond, T.; Vonk, P.; Ash, G.; Crowther, R.; Dance, T.; Edwards, W.; Veldman, W.

1997-02-01

An environmental assessment of the Cold Lake Expansion Project has been conducted to identify major issues of concern by public and government agencies, to determine means to eliminate or reduce those impacts, and to recommend any further efforts required to obtain missing information or monitor impacts. Volume 2 of the environmental impact assessment is divided into two parts. Part 1 (biophysical and resource use assessment) constitutes the primary environmental impact assessment document for the Cold Lake expansion project. It includes technical support documentation in regard to: (1) an assessment of noise impacts, (2) an assessment of greenhouse gas emissions, (3) a conceptual conservation and reclamation plan, (4) a historical resource impact assessment, and (5) a description of effects of oil spills on fish. Part 2 (impact model description) serves a reference document for part 1. It describes the approach taken in developing and assessing the impact models, discusses proposed methods for mitigation and management of residual impacts, and the recommended monitoring requirements for each of the major resource disciplines. The impact models describe the specific pathways through which impacts will occur as a result of interactions between project-related activities and important environmental components. 476 refs., 58 tabs., 23 figs

Development of internal dose assessment procedure for workers in industries using raw materials containing naturally occurring radioactive materials

International Nuclear Information System (INIS)

Choi, Cheol Kyu; KIm, Yong Geon; Ji, Seung Woo; Kim, Kwang Pyo; Koo, Bon Cheol; Chang, Byung Uck

2016-01-01

It is necessary to assess radiation dose to workers due to inhalation of airborne particulates containing naturally occurring radioactive materials (NORM) to ensure radiological safety required by the Natural Radiation Safety Management Act. The objective of this study is to develop an internal dose assessment procedure for workers at industries using raw materials containing natural radionuclides. The dose assessment procedure was developed based on harmonization, accuracy, and proportionality. The procedure includes determination of dose assessment necessity, preliminary dose estimation, airborne particulate sampling and characterization, and detailed assessment of radiation dose. The developed dose assessment procedure is as follows. Radioactivity concentration criteria to determine dose assessment necessity are 10 Bq·g-1 for 40K and 1 Bq·g-1 for the other natural radionuclides. The preliminary dose estimation is performed using annual limit on intake (ALI). The estimated doses are classified into 3 groups (<0.1 mSv, 0.1-0.3 mSv, and >0.3 mSv). Air sampling methods are determined based on the dose estimates. Detailed dose assessment is performed using air sampling and particulate characterization. The final dose results are classified into 4 different levels (<0.1 mSv, 0.1-0.3 mSv, 0.3-1 mSv, and >1 mSv). Proper radiation protection measures are suggested according to the dose level. The developed dose assessment procedure was applied for NORM industries in Korea, including coal combustion, phosphate processing, and monazite handing facilities. The developed procedure provides consistent dose assessment results and contributes to the establishment of optimization of radiological protection in NORM industries

Development of internal dose assessment procedure for workers in industries using raw materials containing naturally occurring radioactive materials

Energy Technology Data Exchange (ETDEWEB)

Choi, Cheol Kyu; KIm, Yong Geon; Ji, Seung Woo; Kim, Kwang Pyo [College of Engineering, Kyung Hee University, Yongin (Korea, Republic of); Koo, Bon Cheol; Chang, Byung Uck [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2016-09-15

It is necessary to assess radiation dose to workers due to inhalation of airborne particulates containing naturally occurring radioactive materials (NORM) to ensure radiological safety required by the Natural Radiation Safety Management Act. The objective of this study is to develop an internal dose assessment procedure for workers at industries using raw materials containing natural radionuclides. The dose assessment procedure was developed based on harmonization, accuracy, and proportionality. The procedure includes determination of dose assessment necessity, preliminary dose estimation, airborne particulate sampling and characterization, and detailed assessment of radiation dose. The developed dose assessment procedure is as follows. Radioactivity concentration criteria to determine dose assessment necessity are 10 Bq·g-1 for 40K and 1 Bq·g-1 for the other natural radionuclides. The preliminary dose estimation is performed using annual limit on intake (ALI). The estimated doses are classified into 3 groups (<0.1 mSv, 0.1-0.3 mSv, and >0.3 mSv). Air sampling methods are determined based on the dose estimates. Detailed dose assessment is performed using air sampling and particulate characterization. The final dose results are classified into 4 different levels (<0.1 mSv, 0.1-0.3 mSv, 0.3-1 mSv, and >1 mSv). Proper radiation protection measures are suggested according to the dose level. The developed dose assessment procedure was applied for NORM industries in Korea, including coal combustion, phosphate processing, and monazite handing facilities. The developed procedure provides consistent dose assessment results and contributes to the establishment of optimization of radiological protection in NORM industries.

Assessment of Conventional Teaching Procedures: Implications for Gifted Learners

Directory of Open Access Journals (Sweden)

Mogbel Aid K Alenizi

2016-07-01

Full Text Available The present research aims to assess the conventional teaching procedures in the development of mathematical skills of the students with learning difficulties. The study group was made up of all the children with academic learning disorders in KSA. The research questions have been scrutinized from the averages and the standard deviation of the marks scored by the participants in the test and control group. The outcomes of the study show that the conventional teaching procedures have effects on mathematical skill development of the female pupils with learning disorders. The results of the study show that the test group outperformed the control group. Based on the data and the evidences, various recommendations have been proposed for the stakeholders in the area of teaching the gifted children so as to ascertain better training for them. Keywords: Maths skills, Learning difficulties, Saudi Arabia

Site-dependent life-cycle impact assessment of acidification

DEFF Research Database (Denmark)

Potting, Josepha Maria Barbara; Schöpp, W.; Blok, Kornelis

1998-01-01

The lack of spatial differentiation in current life-cycle impact assessment (LCIA) affects the relevance of the assessed impact. This article first describes a framework for constructing factors relating the region of emission to the acidifying impact on its deposition areas. Next, these factors...... are established for 44 European regions with the help of the RAINS model, an integrated assessment model that combines information on regional emission levels with information on long-range atmospheric transport to estimate patterns of deposition and concentration for comparison with critical loads and thresholds...

Life Cycle Thinking in Impact Assessment

DEFF Research Database (Denmark)

Bidstrup, Morten

2015-01-01

It has been advocated that life cycle thinking (LCT) should be applied in impact assessment (IA) to a greater extent, since some development proposals pose a risk of significant impacts throughout the interconnected activities of product systems. Multiple authors have proposed the usage of life...

The Environmental Impact Statement and its role in the nuclear licensing procedure

International Nuclear Information System (INIS)

Dolde, K.P.

1995-01-01

The author discusses the implementation in Germany of the EC Directive on Environmental Impact Statements in the light of the legal tradition and concepts of law in Germany, especially in the context of the nuclear licensing procedure. His analysis reveals some legal provisions and legal concepts in existing German law that will have to be ''sacrificed'' in order to do justice to the European Union, as in the formation of the body of EC law governing environmental issues, the Anglo-Saxon approach to regulatory law has been the prevailing line of orientation (the EU ecological audit being an example). On the whole, however, the implementation of the EU Directive will not lead to substantial changes beyond procedural modifications. (HP) [de

Reviewing Bayesian Networks potentials for climate change impacts assessment and management: A multi-risk perspective.

Science.gov (United States)

Sperotto, Anna; Molina, José-Luis; Torresan, Silvia; Critto, Andrea; Marcomini, Antonio

2017-11-01

The evaluation and management of climate change impacts on natural and human systems required the adoption of a multi-risk perspective in which the effect of multiple stressors, processes and interconnections are simultaneously modelled. Despite Bayesian Networks (BNs) are popular integrated modelling tools to deal with uncertain and complex domains, their application in the context of climate change still represent a limited explored field. The paper, drawing on the review of existing applications in the field of environmental management, discusses the potential and limitation of applying BNs to improve current climate change risk assessment procedures. Main potentials include the advantage to consider multiple stressors and endpoints in the same framework, their flexibility in dealing and communicate with the uncertainty of climate projections and the opportunity to perform scenario analysis. Some limitations (i.e. representation of temporal and spatial dynamics, quantitative validation), however, should be overcome to boost BNs use in climate change impacts assessment and management. Copyright © 2017 Elsevier Ltd. All rights reserved.

Developing the RIAM method (rapid impact assessment matrix) in the context of impact significance assessment

International Nuclear Information System (INIS)

Ijaes, Asko; Kuitunen, Markku T.; Jalava, Kimmo

2010-01-01

In this paper the applicability of the RIAM method (rapid impact assessment matrix) is evaluated in the context of impact significance assessment. The methodological issues considered in the study are: 1) to test the possibilities of enlarging the scoring system used in the method, and 2) to compare the significance classifications of RIAM and unaided decision-making to estimate the consistency between these methods. The data used consisted of projects for which funding had been applied for via the European Union's Regional Development Trust in the area of Central Finland. Cases were evaluated with respect to their environmental, social and economic impacts using an assessment panel. The results showed the scoring framework used in RIAM could be modified according to the problem situation at hand, which enhances its application potential. However the changes made in criteria B did not significantly affect the final ratings of the method, which indicates the high importance of criteria A1 (importance) and A2 (magnitude) to the overall results. The significance classes obtained by the two methods diverged notably. In general the ratings given by RIAM tended to be smaller compared to intuitive judgement implying that the RIAM method may be somewhat conservative in character.

Financial and testamentary capacity evaluations: procedures and assessment instruments underneath a functional approach.

Science.gov (United States)

Sousa, Liliana B; Simões, Mário R; Firmino, Horácio; Peisah, Carmelle

2014-02-01

Mental health professionals are frequently involved in mental capacity determinations. However, there is a lack of specific measures and well-defined procedures for these evaluations. The main purpose of this paper is to provide a review of financial and testamentary capacity evaluation procedures, including not only the traditional neuropsychological and functional assessment but also the more recently developed forensic assessment instruments (FAIs), which have been developed to provide a specialized answer to legal systems regarding civil competencies. Here the main guidelines, papers, and other references are reviewed in order to achieve a complete and comprehensive selection of instruments used in the assessment of financial and testamentary capacity. Although some specific measures for financial abilities have been developed recently, the same is not true for testamentary capacity. Here are presented several instruments or methodologies for assessing financial and testamentary capacity, including neuropsychological assessment, functional assessment scales, performance based functional assessment instruments, and specific FAIs. FAIs are the only specific instruments intended to provide a specific and direct answer to the assessment of financial capacity based on legal systems. Considering the need to move from a diagnostic to a functional approach in financial and testamentary capacity evaluations, it is essential to consider both general functional examination as well as cognitive functioning.

Assessing the social impacts of the biofuel lifecycle

DEFF Research Database (Denmark)

Jørgensen, Andreas; Hauschild, Michael Zwicky

In order to assess the social impacts of the biofuel lifecycle, Social Life Cycle Assessment (SLCA) may be a promising tool. However, as this review study points out, several problems are still to be solved. SLCA can be defined as a tool for assessing a product’s or service’s total impact on human...... health and well-being throughout its life cycle. During the recent years several different approaches towards SLCA have been developing. This review reveals a broad variety in how the SLCAs address all methodological steps. One of the main differences is in the choice and formulation of social indicators....... The indicators address a wide variety of issues; some approaches focus on impacts created in the very close proximity of the processes included in the product system, whereas others focus on the more remote societal consequences. The perception of social impacts is thus very varying. An assessment focussing...

Privacy Impact Assessment (PIA) Repository

Data.gov (United States)

Department of Veterans Affairs — This repository contains Privacy Impact Assessments (PIA) that have been vetted/approved. Section 208 of the Electronic Government Act of 2002 (E-Gov Act) requires...

Screening assessment and requirements for a comprehensive assessment: Volume 1, Draft. Columbia River comprehensive impact assessment

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-04-01

To evaluate the impact to the Columbia River from the Hanford Site-derived contaminants, the U.S. Department of Energy, U.S. Environmental Protection Agency, and Washington State Department of Ecology initiated a study referred to as the Columbia River Comprehensive Impact Assessment (CRCIA). To address concerns about the scope and direction of CRCIA as well as enhance regulator, tribal, stockholder, and public involvement, the CRCIA Management Team was formed in August 1995. The Team agreed to conduct CRCIA using a phased approach. The initial phase, includes two components: 1) a screening assessment to evaluate the potential impact to the river, resulting from current levels of Hanford-derived contaminants in order to support decisions on Interim Remedial Measures, and 2) a definition of the essential work remaining to provide an acceptable comprehensive river impact assessment. The screening assessment is described in Part I of this report. The essential work remaining is Part II of this report. The objective of the screening assessment is to identify areas where the greatest potential exists for adverse effects on humans or the environment. Part I of this report discusses the scope, technical approach, and results of the screening assessment. Part II defines a new paradigm for predecisional participation by those affected by Hanford cleanup decisions.

Screening assessment and requirements for a comprehensive assessment: Volume 1, Draft. Columbia River comprehensive impact assessment

International Nuclear Information System (INIS)

1997-04-01

To evaluate the impact to the Columbia River from the Hanford Site-derived contaminants, the U.S. Department of Energy, U.S. Environmental Protection Agency, and Washington State Department of Ecology initiated a study referred to as the Columbia River Comprehensive Impact Assessment (CRCIA). To address concerns about the scope and direction of CRCIA as well as enhance regulator, tribal, stockholder, and public involvement, the CRCIA Management Team was formed in August 1995. The Team agreed to conduct CRCIA using a phased approach. The initial phase, includes two components: 1) a screening assessment to evaluate the potential impact to the river, resulting from current levels of Hanford-derived contaminants in order to support decisions on Interim Remedial Measures, and 2) a definition of the essential work remaining to provide an acceptable comprehensive river impact assessment. The screening assessment is described in Part I of this report. The essential work remaining is Part II of this report. The objective of the screening assessment is to identify areas where the greatest potential exists for adverse effects on humans or the environment. Part I of this report discusses the scope, technical approach, and results of the screening assessment. Part II defines a new paradigm for predecisional participation by those affected by Hanford cleanup decisions

Video observation of procedural skills for assessment of trabeculectomy performed by residents.

Science.gov (United States)

Hassanpour, Narges; Chen, Rebecca; Baikpour, Masoud; Moghimi, Sasan

2016-06-01

The efficacy and sufficiency of a healthcare system is directly related to the knowledge and skills of graduates working in the system. In this regard, many different assessment methods have been proposed to evaluate various skills of the learners. Video Observation of Procedural Skills (VOPS) is one newly-proposed method. In this study we aimed to compare the results of the VOPS method with the more commonly used Direct Observation of Procedural Skills (DOPS). In this prospective study conducted in 2012, all 10 ophthalmology residents of post graduate year 4 were selected for participation. Three months into training in the glaucoma ward, these residents performed trabeculectomy surgery on patients, and their procedural skills were assessed in real time by an expert via the DOPS method. All surgeries were also recorded and later evaluated via the VOPS method by an expert. Bland-Altman plot also was used to compare the two methods and calculating the mean and 95% limit of agreement. Residents have been done a mean of 14.9 ± 3.5 (range 10-20) independent trabeculectomy before the assessments. DOPS grade was positively associated with number of independent trabeculectomy during glaucoma rotation (β=0.227, p = 0.004). The intra-observer reproducibility of VOPS measurements was 0.847 (95% CI: 0.634, 0.961). The mean VOPS grade was significantly lower than the mean DOPS grade (8.4 vs. 8.9, p = 0.02). However, a good correlation was observed between the grades of VOPS and DOPS (r = 0.89, p = 0.001). Bland-Altman analysis demonstrated that all data points fell within the 95% limits of agreement (-1.46, 0.46). The present study showed that VOPS might be considered a feasible, valid, and reliable assessment method for procedural skills of medical students and residents that can be used as an alternative to the DOPS method. However, VOPS might underestimate DOPS in evaluating surgical skills of residents.

Life cycle assessment perspectives on delivering an infant in the US

Energy Technology Data Exchange (ETDEWEB)

Campion, Nicole [University of Pittsburgh, 949 Benedum Hall, Pittsburgh, PA 15261 (United States); Thiel, Cassandra L., E-mail: clt31@pitt.edu [University of Pittsburgh, 949 Benedum Hall, Pittsburgh, PA 15261 (United States); DeBlois, Justin [University of Pittsburgh, 949 Benedum Hall, Pittsburgh, PA 15261 (United States); Woods, Noe C. [Magee-Womens Hospital of UPMC, 300 Halket Street, Pittsburgh, PA 15235 (United States); Landis, Amy E. [Arizona State University, P.O. Box 875306, Tempe, AZ 85287-5306 (United States); Bilec, Melissa M. [University of Pittsburgh, 949 Benedum Hall, Pittsburgh, PA 15261 (United States)

2012-05-15

This study introduces life cycle assessment as a tool to analyze one aspect of sustainability in healthcare: the birth of a baby. The process life cycle assessment case study presented evaluates two common procedures in a hospital, a cesarean section and a vaginal birth. This case study was conducted at Magee-Womens Hospital of the University of Pittsburgh Medical Center, which delivers over 10,000 infants per year. The results show that heating, ventilation, and air conditioning (HVAC), waste disposal, and the production of the disposable custom packs comprise a large percentage of the environmental impacts. Applying the life cycle assessment tool to medical procedures allows hospital decision makers to target and guide efforts to reduce the environmental impacts of healthcare procedures. - Highlights: Black-Right-Pointing-Pointer Life cycle assessment helps identify the environmental impacts of medical procedures. Black-Right-Pointing-Pointer Disposable custom packs represent a large portion of environmental impacts of births. Black-Right-Pointing-Pointer Electricity loading contributes to global warming potential and respiratory effects. Black-Right-Pointing-Pointer Impact improvements should focus on heating, ventilation, and air conditioning and disposable custom packs.

Dosimetric impact of the variation of the prostate volume and shape between pretreatment planning and treatment procedure

International Nuclear Information System (INIS)

Beaulieu, Luc; Aubin, Sylviane; Taschereau, Richard; Pouliot, Jean; Vigneault, Eric

2002-01-01

Purpose: The goal of this study is to evaluate the dosimetric impact on a pretreatment planning of prostatic volume and shape variations occurring between the moment of the volume study (preplanning) and just before a transperineal permanent seed implant procedure. Such variations could be an obvious source of misplacement of the seeds relative to the prostate gland and organs at risk. Other sources of dosimetric uncertainties, such as misplacement due to the procedure itself or edema, are eliminated by looking at these variations before the implant procedure. Methods and Materials: For 35 clinical cases, prostate contours were taken at preplanning time as well as in the operating room (OR) minutes before the procedure. Comparison of shape and volume between the two sets was made. The impact on V100 was evaluated by placing the seeds in their planned positions in the new volume (clinical situation) and also by performing a new plan with the second set of contours to simulate an intraoperative approach. Results: The volume taken in the OR remained unchanged compared to the pretreatment planning volume in only 37% of the cases. While on average the dose coverage loss from pretreatment planning due to a combination of variations of volume and shape was small at 5.7%, a V100 degradation of up to 20.9% was observed in extreme cases. Even in cases in which no changes in volume were observed, changes in shape occurred and strongly affected implant dosimetry. Conclusions: Variations of volume and shape between pretreatment planning and the implant procedure can have a strong impact on the dosimetry if the planning and the implant procedure are not performed on the same day. This is an argument in favor of performing implant dosimetry in the OR

Discussion of some issues in assessing nuclear and radiation environmental impacts and in related assessment

International Nuclear Information System (INIS)

Pan Ziqiang

1998-01-01

The author discusses some noticeable issues in drafting assessment report of nuclear and radiation environmental impacts and relevant aspects needed to be considered from the point of view of comprehensive environmental assessment. The considerable issue are principles of radioactive waste management, optimization of radiation protection and collective dose, and uncertainty of the assessment. Implementing reporting system on assessment of nuclear and radiation environmental impacts would improve environmental protection for nuclear and radiation facilities. However, trade's, regional , country and global assessment of environmental impacts has to be enhanced. For this purpose, it is necessary to develop methodology of qualitative and quantitative comprehensive assessment

Procedures for conducting common cause failure analysis in probabilistic safety assessment

International Nuclear Information System (INIS)

1992-05-01

The principal objective of this report is to supplement the procedure developed in Mosleh et al. (1988, 1989) by providing more explicit guidance for a practical approach to common cause failures (CCF) analysis. The detailed CCF analysis following that procedure would be very labour intensive and time consuming. This document identifies a number of options for performing the more labour intensive parts of the analysis in an attempt to achieve a balance between the need for detail, the purpose of the analysis and the resources available. The document is intended to be compatible with the Agency's Procedures for Conducting Probabilistic Safety Assessments for Nuclear Power Plants (IAEA, 1992), but can be regarded as a stand-alone report to be used in conjunction with NUREG/CR-4780 (Mosleh et al., 1988, 1989) to provide additional detail, and discussion of key technical issues

The value of environmental impact assessments

International Nuclear Information System (INIS)

Sohocki, D.D.

1996-01-01

The environment and the economy are inextricably linked. Today the environmental, economic, and social associated with project and program decisions are at times of such a magnitude and duration that they exceed our ability to understand, let alone mitigate them. Energy production, distribution, pricing, policies, end uses, and externalities demonstrate the need for wise planning and informed decision making. International cooperation, based upon mutually shared respect, responsibility, and innovative solutions is an essential component of addressing contemporary issues, impacts, and opportunities. Both egypt and the united states have laws requiring environmental impact assessments. Just as egypt can learn from our successes and failures in the environmental impact assessment field over the past 36 years, the united states and other nations can learn as egypt develops and innovates its own approaches and solutions

Transboundary Environmental Impact Assessment : An Introduction

NARCIS (Netherlands)

Bastmeijer, C.J.; Koivurova, T.; Bastmeijer, K.; Koivurova, T.

2008-01-01

Environmental Impact Assessment (EIA) is a well-established instrument of environmental law and policy that aims to ensure that potential adverse environmental effects of human activities are assessed before decisions on such activities are made. The instrument is increasingly being applied in

An Approach to Assess Observation Impact Based on Observation-Minus-Forecast Residuals

Science.gov (United States)

Todling, Ricardo

2009-01-01

Langland and Baker (2004) introduced an approach to assess the impact of observations on the forecasts. In that, a state-space aspect of the forecast is defined and a procedure is derived that relates changes in the aspect with changes in the initial conditions associated with the assimilation of observations) ultimately providing information about the impact of individual observations on the forecast. Some features of the approach are to be noted. The typical choice of forecast aspect employed in related works is rather arbitrary and leads to an incomplete assessment of the observing system. Furthermore, the state-space forecast aspect requires availability of a verification state that should ideally be uncorrelated with the forecast but in practice is not. Lastly, the approach involves the adjoint operator of the entire data assimilation system and as such it is constrained by the validity of this operator. In this presentation, an observation-space metric is used that, for a relatively time-homogeneous observing system, allows inferring observation impact on the forecast without some of the limitations above. Specifically, using observation-minus-forecast residuals leads to an approach with the following features: (i) it suggests a rather natural choice of forecast aspect, directly linked to the analysis system and providing full assessment of the observations; (ii) it naturally avoids introducing undesirable correlations in the forecast aspect by verifying against the observations; and (iii) it does not involve linearization and use of adjoints; therefore being applicable to any length of forecast. The state and observation-space approaches might be complementary to some degree, and involve different limitations and complexities. Illustrations are given using the NASA GEOS-5 data.

Erosion risk analysis by GIS in environmental impact assessments: a case study--Seyhan Köprü Dam construction.

Science.gov (United States)

Sahin, S; Kurum, E

2002-11-01

Environmental Impact Assessment (EIA) is a systematically constructed procedure whereby environmental impacts caused by proposed projects are examined. Geographical Information Systems (GIS) are crucially efficient tools for impact assessment and their use is likely to dramatically increase in the near future. GIS have been applied to a wide range of different impact assessment projects and dams among them have been taken as the case work in this article. EIA Regulation in force in Turkey requires the analysis of steering natural processes that can be adversely affected by the proposed project, particularly in the section of the analysis of the areas with higher landscape value. At this point, the true potential value of GIS lies in its ability to analyze spatial data with accuracy. This study is an attempt to analyze by GIS the areas with higher landscape value in the impact assessment of dam constructions in the case of Seyhan-Köprü Hydroelectric Dam project proposal. A method needs to be defined before the overlapping step by GIS to analyze the areas with higher landscape value. In the case of Seyhan-Köprü Hydroelectric Dam project proposal of the present work, considering the geological conditions and the steep slopes of the area and the type of the project, the most important natural process is erosion. Therefore, the areas of higher erosion risk were considered as the Areas with Higher Landscape Value from the conservation demands points of view.

Introduction: The effectiveness of impact assessment instruments

OpenAIRE

Cashmore, M; Bond, A; Sadler, B

2009-01-01

The global application of impact assessment instruments to achieve a variety of policy integration goals (e.g. the mainstreaming of environmental, gender or economic efficiency concerns) continues to proliferate. These instruments represent important components of contemporary political governance and hence are an important locus for applied research. This special issue of Impact Assessment and Project Appraisal critically examines 'state-of-the-art' knowledge and understanding of the effecti...

A Procedural Skills OSCE: Assessing Technical and Non-Technical Skills of Internal Medicine Residents

Science.gov (United States)

Pugh, Debra; Hamstra, Stanley J.; Wood, Timothy J.; Humphrey-Murto, Susan; Touchie, Claire; Yudkowsky, Rachel; Bordage, Georges

2015-01-01

Internists are required to perform a number of procedures that require mastery of technical and non-technical skills, however, formal assessment of these skills is often lacking. The purpose of this study was to develop, implement, and gather validity evidence for a procedural skills objective structured clinical examination (PS-OSCE) for internal…

Assessment of psychosocial impact of dental aesthetics.

Science.gov (United States)

Khan, Munizeh; Fida, Mubassar

2008-09-01

To assess the psychosocial impact of dental aesthetics using the 'Psychosocial Impact of Dental Aesthetics Questionnaire' (PIDAQ) and self-rated Aesthetic Component (AC) of the Index of Orthodontic Treatment Need (IOTN). Cross-sectional study. Dental Section, the Aga Khan University Hospital, Karachi, from August to September 2006. Adults with no prior orthodontic treatment were asked to complete a modified version of the 'Psychosocial Impact of Dental Aesthetics Questionnaire' (PIDAQ). A total of four variables including 'Dental Self-confidence', 'Social impact', 'Psychological impact' and 'Perceived orthodontic treatment need' were assessed by a series of statements, whereas dental aesthetics were assessed by the respondents using the IOTN Aesthetic Component (self-rated IOTN-AC). Kruskal-Walli's test was applied to determine significance. The respondents were 120 adults (70 females and 50 males; mean age 25.8 years), all four of the above-mentioned variables measuring psychosocial impact showed positive and significant correlations with the perceived severity of malocclusion as depicted by the Aesthetic Component (AC) of Index of Orthodontic Treatment Need (IOTN), with p-value of less than 0.01 for all variables. The results indicate the strong psychosocial impact of altered dental aesthetics on the emotional state of an individual. The association between self-rated IOTN-AC grading with psychosocial well-being stands established, indicating that the perceived aesthetics of malocclusion may be as significant a factor in determining treatment need as the degree of malocclusion.

Surface Environmental Surveillance Procedures Manual

Energy Technology Data Exchange (ETDEWEB)

RW Hanf; TM Poston

2000-09-20

Environmental surveillance data are used in assessing the impact of current and past site operations on human health and the environment, demonstrating compliance with applicable local, state, and federal environmental regulations, and verifying the adequacy of containment and effluent controls. SESP sampling schedules are reviewed, revised, and published each calendar year in the Hanford Site Environmental Surveillance Master Sampling Schedule. Environmental samples are collected by SESP staff in accordance with the approved sample collection procedures documented in this manual.

Environmental impact assessment of projects in the People's Republic of China: new law, old problems

International Nuclear Information System (INIS)

Wang Yan; Morgan, Richard K.; Cashmore, Mat

2003-01-01

After more than 20 years of experience with environmental impact assessment (EIA), the government of the People's Republic of China is set to introduce a new EIA Law, in September 2003, in which strategic environmental assessment (SEA) complements the current project-oriented EIA process. In general, the new law does not attempt to modify the existing EIA system in any radical ways, suggesting that the government consider current practices satisfactory. In order to assess the likely prospects of the new EIA Law for project-level EIA, this paper presents an evaluation of the current EIA process in China, first, establishing the historical context of the current process and, second, considering the main issues and concerns relating to the institutional and procedural arrangements, and practical implementation of the process. The main problems highlighted are as follows: the narrow historic focus on pollution of air, water and soil, at the expense of the consideration of wider environmental, social and health impacts; environmental protection agencies being funded by development-oriented local government administrations; the lack of consideration of alternatives in EIA processes; and the lack of effective public participation. More specific procedural issues are also discussed. On the basis of this analysis, we make recommendations for improving the effectiveness of EIA at the project level. The introduction of SEA in the new law marks a real step forward for EIA in China, although it appears to exclude central government policies, and there are improved provisions for public participation. However, the prospects for EIA in China will remain mixed as long as the new law leaves project-level EIA largely unchanged

IMPACT ASSESSMENT OF STRUCTURAL FLOOD MITIGATION MEASURES

Directory of Open Access Journals (Sweden)

ZVIJAKOVA LENKA

2015-03-01

Full Text Available The objective of the paper is to propose a methodology for assessing water constructions, which will allow impact assessment of water constructions on the environment and hence select the best option for the permission process. The result is “Guideline for environmental impact assessment of flood protection object”, which uses the method of UMRA (universal matrix of risk analysis, which is one of the methods of risk analysis proposed not only to enhance the transparency and sensitivity of the evaluation process, but also to cope with the requirements of the EIA system in the Slovakia and Europe Union.

Development of residual stress analysis procedure for fitness-for-service assessment of welded structure

International Nuclear Information System (INIS)

Kim, Jong Sung; Jin, Tae Eun; Dong, P.; Prager, M.

2003-01-01

In this study, a state of art review of existing residual stress analysis techniques and representative solutions is presented in order to develop the residual stress analysis procedure for Fitness-For-Service(FFS) assessment of welded structure. Critical issues associated with existing residual stress solutions and their treatments in performing FFS are discussed. It should be recognized that detailed residual stress evolution is an extremely complicated phenomenon that typically involves material-specific thermomechanical/metallurgical response, welding process physics, and structural interactions within a component being welded. As a result, computational procedures can vary significantly from highly complicated numerical techniques intended only to elucidate a small part of the process physics to cost-effective procedures that are deemed adequate for capturing some of the important features in a final residual stress distribution. Residual stress analysis procedure for FFS purposes belongs to the latter category. With this in mind, both residual stress analysis techniques and their adequacy for FFS are assessed based on both literature data and analyses performed in this investigation

Standardization of SMP procedure and its impact on outcome

Directory of Open Access Journals (Sweden)

Rachita S Dhurat

2017-01-01

Full Text Available Background: Cosmetic deformities can result from various types of alopecia or even post hair transplantation procedures. Patients with such deformities seek aesthetically appealing longer-lasting options. Scalp concealers are commonly used by men and women to camouflage these deformities. Scalp micropigmentation (SMP is one of the concealers recently gaining popularity. Objectives: SMP is a novel technique wherein microdot tattoos are placed in a stippling pattern to mimic hair follicles that are cut close to the scalp and various variables affecting its outcome were evaluated. Methods: Forty-five subjects were recruited for the study. The various factors affecting outcome of SMP—angle of needle against the scalp, depth of needle into the scalp, time of the needle contact in scalp, speed of the rotor, resistance of scalp, color of pigment, viscosity of dye, needle number, needle thickness, and pattern of dot placement—were systematically studied in 15 patients through clinical photographs and trichoscopy. Ideal depth of pigment deposition was assessed through histopathological examination. After using these optimum variables, standardized SMP was performed in 30 patients with hair loss (3 patients with cicatricial and 27 patients with diffuse non-cicatricial alopecia. SMP was also used to create an aesthetically denser hairline. The outcome of the procedure was evaluated using standardized global photographs. Results: The ideal parameters were established to achieve standard reproducible results. There were great patient satisfaction and acceptance of the procedure. All the patients showed moderate to great improvement after the procedure with satisfactory scalp coverage. Adverse events were transient which were seen in the form of edema and redness. Conclusion: SMP offers a non-medical, tattoo-based cosmetically appealing and effective “cover-up” that hides the unsightly conditions. The cosmetic tattoo placement creates an illusion of

Helicopter Flight Procedures for Community Noise Reduction

Science.gov (United States)

Greenwood, Eric

2017-01-01

A computationally efficient, semiempirical noise model suitable for maneuvering flight noise prediction is used to evaluate the community noise impact of practical variations on several helicopter flight procedures typical of normal operations. Turns, "quick-stops," approaches, climbs, and combinations of these maneuvers are assessed. Relatively small variations in flight procedures are shown to cause significant changes to Sound Exposure Levels over a wide area. Guidelines are developed for helicopter pilots intended to provide effective strategies for reducing the negative effects of helicopter noise on the community. Finally, direct optimization of flight trajectories is conducted to identify low noise optimal flight procedures and quantify the magnitude of community noise reductions that can be obtained through tailored helicopter flight procedures. Physically realizable optimal turns and approaches are identified that achieve global noise reductions of as much as 10 dBA Sound Exposure Level.

The interaction of criminal procedure and outcome.

Science.gov (United States)

Laxminarayan, Malini; Pemberton, Antony

2014-01-01

Procedural quality is an important aspect of crime victims' experiences in criminal proceedings and consists of different dimensions. Two of these dimensions are procedural justice (voice) and interpersonal justice (respectful treatment). Social psychological research has suggested that both voice and respectful treatment are moderated by the impact of outcomes of justice procedures on individuals' reactions. To add to this research, we extend this assertion to the criminal justice context, examining the interaction between the assessment of procedural quality and outcome favorability with victim's trust in the legal system and self-esteem. Hierarchical regression analyses reveal that voice, respectful treatment and outcome favorability are predictive of trust in the legal system and self-esteem. Further investigation reveals that being treated with respect is only related to trust in the legal system when outcome favorability is high. Copyright © 2014 Elsevier Ltd. All rights reserved.

Rapid Assessment of Anthropogenic Impacts of Exposed Sandy ...

African Journals Online (AJOL)

We applied a rapid assessment methodology to estimate the degree of human impact of exposed sandy beaches in Ghana using ghost crabs as ecological indicators. The use of size ranges of ghost crab burrows and their population density as ecological indicators to assess extent of anthropogenic impacts on beaches ...

Assessing Animal Welfare Impacts in the Management of European Rabbits (Oryctolagus cuniculus), European Moles (Talpa europaea) and Carrion Crows (Corvus corone).

Science.gov (United States)

Baker, Sandra E; Sharp, Trudy M; Macdonald, David W

2016-01-01

Human-wildlife conflict is a global issue. Attempts to manage this conflict impact upon wild animal welfare, an issue receiving little attention until relatively recently. Where human activities harm animal welfare these effects should be minimised where possible. However, little is known about the welfare impacts of different wildlife management interventions, and opinions on impacts vary widely. Welfare impacts therefore need to be assessed objectively. Our objectives were to: 1) establish whether an existing welfare assessment model could differentiate and rank the impacts of different wildlife management interventions (for decision-making purposes); 2) identify and evaluate any additional benefits of making formal welfare assessments; and 3) illustrate issues raised by application of the model. We applied the welfare assessment model to interventions commonly used with rabbits (Oryctolagus cuniculus), moles (Talpa europaea) and crows (Corvus corone) in the UK. The model ranked interventions for rabbits (least impact first: fencing, head shot, chest shot) and crows (shooting, scaring, live trapping with cervical dislocation). For moles, managing molehills and tunnels scored least impact. Both spring trapping, and live trapping followed by translocation, scored greater impacts, but these could not be compared directly as they scored on different axes of the model. Some rankings appeared counter-intuitive, highlighting the need for objective formal welfare assessments. As well as ranking the humaneness of interventions, the model highlighted future research needs and how Standard Operating Procedures might be improved. The model is a milestone in assessing wildlife management welfare impacts, but our research revealed some limitations of the model and we discuss likely challenges in resolving these. In future, the model might be developed to improve its utility, e.g. by refining the time-scales. It might also be used to reach consensus among stakeholders about

Assessing Animal Welfare Impacts in the Management of European Rabbits (Oryctolagus cuniculus), European Moles (Talpa europaea) and Carrion Crows (Corvus corone)

Science.gov (United States)

Baker, Sandra E.; Sharp, Trudy M.; Macdonald, David W.

2016-01-01

Human-wildlife conflict is a global issue. Attempts to manage this conflict impact upon wild animal welfare, an issue receiving little attention until relatively recently. Where human activities harm animal welfare these effects should be minimised where possible. However, little is known about the welfare impacts of different wildlife management interventions, and opinions on impacts vary widely. Welfare impacts therefore need to be assessed objectively. Our objectives were to: 1) establish whether an existing welfare assessment model could differentiate and rank the impacts of different wildlife management interventions (for decision-making purposes); 2) identify and evaluate any additional benefits of making formal welfare assessments; and 3) illustrate issues raised by application of the model. We applied the welfare assessment model to interventions commonly used with rabbits (Oryctolagus cuniculus), moles (Talpa europaea) and crows (Corvus corone) in the UK. The model ranked interventions for rabbits (least impact first: fencing, head shot, chest shot) and crows (shooting, scaring, live trapping with cervical dislocation). For moles, managing molehills and tunnels scored least impact. Both spring trapping, and live trapping followed by translocation, scored greater impacts, but these could not be compared directly as they scored on different axes of the model. Some rankings appeared counter-intuitive, highlighting the need for objective formal welfare assessments. As well as ranking the humaneness of interventions, the model highlighted future research needs and how Standard Operating Procedures might be improved. The model is a milestone in assessing wildlife management welfare impacts, but our research revealed some limitations of the model and we discuss likely challenges in resolving these. In future, the model might be developed to improve its utility, e.g. by refining the time-scales. It might also be used to reach consensus among stakeholders about

Assessing Animal Welfare Impacts in the Management of European Rabbits (Oryctolagus cuniculus, European Moles (Talpa europaea and Carrion Crows (Corvus corone.

Directory of Open Access Journals (Sweden)

Sandra E Baker

Full Text Available Human-wildlife conflict is a global issue. Attempts to manage this conflict impact upon wild animal welfare, an issue receiving little attention until relatively recently. Where human activities harm animal welfare these effects should be minimised where possible. However, little is known about the welfare impacts of different wildlife management interventions, and opinions on impacts vary widely. Welfare impacts therefore need to be assessed objectively. Our objectives were to: 1 establish whether an existing welfare assessment model could differentiate and rank the impacts of different wildlife management interventions (for decision-making purposes; 2 identify and evaluate any additional benefits of making formal welfare assessments; and 3 illustrate issues raised by application of the model. We applied the welfare assessment model to interventions commonly used with rabbits (Oryctolagus cuniculus, moles (Talpa europaea and crows (Corvus corone in the UK. The model ranked interventions for rabbits (least impact first: fencing, head shot, chest shot and crows (shooting, scaring, live trapping with cervical dislocation. For moles, managing molehills and tunnels scored least impact. Both spring trapping, and live trapping followed by translocation, scored greater impacts, but these could not be compared directly as they scored on different axes of the model. Some rankings appeared counter-intuitive, highlighting the need for objective formal welfare assessments. As well as ranking the humaneness of interventions, the model highlighted future research needs and how Standard Operating Procedures might be improved. The model is a milestone in assessing wildlife management welfare impacts, but our research revealed some limitations of the model and we discuss likely challenges in resolving these. In future, the model might be developed to improve its utility, e.g. by refining the time-scales. It might also be used to reach consensus among

The impact of extended longitudinal observation on the assessment of personality disorders.

Science.gov (United States)

Pedersen, G; Karterud, S; Hummelen, B; Wilberg, T

2013-11-01

Multiple sources of information are necessary for a valid assessment of personality disorders (PDs). This study investigates the impact of longitudinal observation. The sample comprised 1217 patients from 15 different treatment units. PDs were assessed at admission to treatment using the Structured Clinical Interview for DSM-IV Axis II Personality Disorders (SCID-II) and additional clinical information (best estimate diagnosis). After approximately 18 weeks of treatment, the SCID-II protocols were re-examined at clinical conferences and the diagnostic status reassessed on the basis of longitudinal observations in multiple group situations (longitudinal, expert, all data principle). Using this procedure, 78% of the patients' diagnostic criteria sets were changed, and 32% of patients' diagnostic statuses were changed. Many (32%) patients who were evaluated initially as not having a PD received a PD diagnosis after re-examination. The information provided by customary clinical assessment has important limitations, and longitudinal observation provides additional information that may change the diagnostic status in approximately one-third of PD cases. Copyright © 2013 John Wiley & Sons, Ltd.

Environmental impact assessment of undersea seismic surveys. Part 1.: Legislations and reference guidelines

International Nuclear Information System (INIS)

Lanfredi, C.; Azzellino, A.; Vismara, R.

2009-01-01

Noise effects on marine ecosystems are an increasing concern to the public, research organizations and environmental management agencies. Recent observations of marine mammal strandings coincident with loud, anthropogenic sounds have focused attention on the potential impact of such sounds on sensitive species and populations. The sound sources that have been coincident with marine mammal strandings are air gun arrays, and military, mid-frequency (2-10 kHz) sonars, both of which are widely used throughout the world respectively for geophysical exploration and for surveillance and defence at sea. Alternative technologies are not readily available. Acoustic impacts on marine environment need to be addressed through a comprehensive and transparent management and regulatory system. Even if the underwater noise is now included in the E U Marine Directive (16976/06), specific laws about the management of underwater noise are not yet available in the European contest. As a first step is needed to adopt the basic mitigation procedures (guide-lines) suggested by international organisations (IWC, ACCOBAMS) and regulate the rules to carry out an Environmental Impact Assessment (EIA) of sound producer activities. [it

Assessing the observed impact of anthropogenic climate change

OpenAIRE

Hansen, G; Stone, D

2016-01-01

© 2016 Macmillan Publishers Limited. All rights reserved. Impacts of recent regional changes in climate on natural and human systems are documented across the globe, yet studies explicitly linking these observations to anthropogenic forcing of the climate are scarce. Here we provide a systematic assessment of the role of anthropogenic climate change for the range of impacts of regional climate trends reported in the IPCC's Fifth Assessment Report. We find that almost two-thirds of the impacts...

Radiological impact assessment within the IAEA Arctic Assessment Project (IASAP)

DEFF Research Database (Denmark)

Scott, E.M.; Gurbutt, P.; Harmes, I.

1998-01-01

As part of the International Arctic Seas Assessment Project (IASAP) of IAEA, a working group was created to model the dispersal and transfer of radionuclides released from radioactive waste disposed of in the Kara Sea and bays of Novaya Zemlya and to assess the radiological impact. Existing models...

NASA Safety Standard: Guidelines and Assessment Procedures for Limiting Orbital Debris

Science.gov (United States)

1995-01-01

Collision with orbital debris is a hazard of growing concern as historically accepted practices and procedures have allowed man-made objects to accumulate in orbit. To limit future debris generation, NASA Management Instruction (NMI) 1700.8, 'Policy to Limit Orbital Debris Generation,' was issued in April of 1993. The NMI requires each program to conduct a formal assessment of the potential to generate orbital debris. This document serves as a companion to NMI 1700.08 and provides each NASA program with specific guidelines and assessment methods to assure compliance with the NMI. Each main debris assessment issue (e.g., Post Mission Disposal) is developed in a separate chapter.

Procedural advice on self-assessment and task selection in learner-controlled education

NARCIS (Netherlands)

Taminiau, Bettine; Corbalan, Gemma; Kester, Liesbeth; Van Merriënboer, Jeroen; Kirschner, Paul A.

2011-01-01

Taminiau, E. M. C., Corbalan, G., Kester, L., Van Merriënboer, J. J. G., & Kirschner, P. A. (2010, March). Procedural advice on self-assessment and task selection in learner-controlled education. Presentation at the ICO Springschool, Niederalteich, Germany.

Toward an analytical framework for understanding complex social-ecological systems when conducting environmental impact assessments in South Africa

Directory of Open Access Journals (Sweden)

Rebecca Bowd

2015-03-01

Full Text Available Consideration of biophysical impacts has historically dominated environmental impact assessment (EIA practice. Despite the emergence of social impact assessment, the consideration of socioeconomic impacts in EIA is variable, as is the extent of their integration in EIA findings. There is growing recognition for the need to move EIA practice toward sustainability assessment, characterized by comprehensiveness, i.e., scope of impacts, integration, i.e., of biophysical and socioeconomic impacts, and a greater strategic focus. This is particularly the case in developing regions and in countries like South Africa, which have statutory requirements for the full consideration of socioeconomic impacts in EIA. We suggest that EIA practice could benefit from incorporating evolving theory around social-ecological systems (SES as an effective way of moving toward sustainability assessment. As far as we are aware, our study constitutes the first attempt to apply and formalize SES constructs to EIA practice within a regulated procedure. Our framework goes beyond conventional scoping approaches reliant on checklists and matrices by requiring the EIA practitioner to cocreate a conceptual model of the current and future social-ecological system with the implicated communities. This means social and biophysical impacts are assessed integratively, and that communities participate meaningfully in the EIA process, thereby helping address two of the most common shortfalls of EIA practice. The framework was applied in two case studies, establishment of community-based accommodation linked to existing tourism infrastructure (Eastern Cape, South Africa, and a proposed wine estate (KwaZulu-Natal, South Africa. The framework revealed impacts, which would not be considered in a biophysically-oriented EIA, and helped identify development synergies and institutional and governance needs that are equally likely to have been overlooked. We suggest the framework has value as a

Impact of procedure on the post-operative infection risk of patients after elective colon surgery.

Science.gov (United States)

Blitzer, David N; Davis, John M; Ahmed, Nasim; Kuo, Yen-Hong; Kuo, Yen-Liang

2014-12-01

Post-operative infection impacts the quality of patient care, prolongs the length of hospital stay, and utilizes more health care resources. The purpose of this study was to compare the rates of surgical site infection among three major surgical procedures for treating patients with colon pathology. The location of colon resection impacts the post-operative infection rate. A retrospective cohort study was conducted by using the 2006 Nationwide Inpatient Sample. Adult patients (age ≥18 yr) with colon diseases are the population of interest. The disease status and procedures were categorized according to the International Classification of Diseases, Ninth Revision, Clinical Modification (ICD-9-CM). Patients with a primary diagnosis of diverticulosis of the colon without hemorrhage (ICD-9-CM codes: 562.11 and 562.12) or malignant neoplasm of the colon (ICD-9-CM codes: 153.x, where x represents the possible digits within this ICD-9-CM code category), with procedures of open and other right hemicolectomy (ORH; ICD-9-CM code: 45.73) or open and other left hemicolectomy (OLH; ICD-9-CM code: 45.75), or open and other sigmoidectomy (OS; ICD-9-CM code: 45.76) were included for this study. The primary measured outcome for the study was surgical site infection. There were an estimated 26,381 ORH procedures, 9,558 OLH procedures, and 31,656 OS procedures performed in 2006. There was a significant difference among procedures with respect to their age distributions (mean [standard error]: ORH vs. OLH vs. OS=70.5 [0.2] vs. 63.8 [0.3] vs. 59.5 [0.2] yr, pinfection rates: ORH vs. OLH vs. OS=2.9% vs. 5.6% vs. 4.9%, pinfection for OLH (AOR [95% CI]: 1.31 [1.04-1.64], p=0.02) compared with OS. Different sites of colon operations were associated with different risks of surgical site infections. Accordingly, appropriate pre-operative measures should address these differences.

Survey Procedures Manual for the Environmental Survey and Site Assessment Program (ESSAP). Revision 10

International Nuclear Information System (INIS)

2000-01-01

The Environmental Survey and Site Assessment Program (ESSAP) of the Oak Ridge Institute for Science and Education (ORISE) conducts radiological survey activities under a contract with the U. S. Department of Energy (DOE) and for the U.S. Nuclear Regulatory Commission (NRC). ORISE and its programs are operated by Oak Ridge Associated Universities (ORAU) through a contract with DOE. The purpose of this Procedures Manual is to provide a standardized set of procedures that document activities of the program in an auditable manner. These procedures are applicable to both DOE and NRC operations. Procedures presented in this manual are limited to those associated with site survey activities

Life Cycle Impact Assessment in the Arctic: Challenges and Research Needs

Directory of Open Access Journals (Sweden)

Johan Berg Pettersen

2017-09-01

Full Text Available Life cycle assessment (LCA is increasingly used for environmental assessment of products and production processes to support environmental decision-making both worldwide and in the Arctic. However, there are several weaknesses in the impact assessment methodology in LCA, e.g., related to uncertainties of impact assessment results, absence of spatial differentiation in characterization modeling, and gaps in the coverage of impact pathways of different “archetypal” environments. Searching for a new resource base and areas for operation, marine and marine-based industries are continuously moving north, which underlines the need for better life cycle impact assessment in the Arctic, particularly to aid in industrial environmental management systems and stakeholder communications. This paper aims to investigate gaps and challenges in the application of the currently available impact assessment methods in the Arctic context. A simplified Arctic mining LCA case study was carried out to demonstrate the relevance of Arctic emissions at the midpoint and endpoint levels, as well as possible influences of the Arctic context on the impact assessment results. Results of this study showed that significant research gaps remain in Arctic-dependent life cycle impact assessment, particularly on: (i the possible influences of the Arctic-specific features on characterization factors for impact assessment (such as seasonality, cold climate, precipitation, and marine dependence; and (ii the coverage of impact pathways, especially on the under-addressed marine impacts and marine/near-shore dispersion processes. Addressing those identified research gaps and demand for future Arctic life cycle impact assessment could increase the credibility of LCA as an environmental decision-making support tool for Arctic industries and better support sustainable Arctic development.

Study on the impact assessment for the life cycle assessment (LCA); Kankyo fuka bunseki ni okeru impact assessment ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This report describes the impact assessment which is an important step for LCA. For classification of the impact assessment, the existing literature was reviewed and a skeleton for the classification was proposed. The weighting factors for nine selected impact categories, which were used to calculate environmental load point (ELP) for the valuation, were obtained for two overseas groups, i.e., students of Amsterdam University and SETAC Europe members. It was found that the former provided the similar trends to general Japanese, however that the latter gave high weighting in the global warming and depletion of ozone layer. The ELP was proposed and applied to automatic washing machine, coffee maker, waste incineration power generation system, and co-generation system. As a result, its effectiveness was demonstrated. This report also describes problems for the LCA of thermal and material recycling of PS trays. 99 refs., 96 figs., 73 tabs.

Risk analysis within environmental impact assessment of proposed construction activity

Energy Technology Data Exchange (ETDEWEB)

Zeleňáková, Martina; Zvijáková, Lenka

2017-01-15

Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

Risk analysis within environmental impact assessment of proposed construction activity

International Nuclear Information System (INIS)

Zeleňáková, Martina; Zvijáková, Lenka

2017-01-01

Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

The relation of risk assessment and health impact assessment

DEFF Research Database (Denmark)

Ádám, Balázs; Gulis, Gabriel

2013-01-01

than assessing a present situation. As part of this process, however, methods applied in risk assessment are used. Risk assessment typically characterises relation of a well-defined risk factor to a well-defined health outcome. Within HIA usually several individual risk assessments are needed...... of the causal chain from the proposal through related health determinants and risk factors to health outcomes. The stepwise analysis, systematic prioritization and consideration of horizontal interactions between the causal pathways make it feasible to use widely recognized risk assessment methods in the HIA......The level and distribution of health risks in a society is substantially influenced by measures of various policies, programmes or projects. Risk assessment can evaluate the nature, likelihood and severity of an adverse effect. Health impact assessment (HIA) provides similar function when used...

Discussion on the post-project assessment of environmental impact for nuclear facilities

International Nuclear Information System (INIS)

Shang Zhaorong

2013-01-01

The paper introduces the background of post-project assessment of environmental impact in the world and focuses on the characteristic of environmental impact assessment for Chinese nuclear facilities construction projects, analyzes the necessity, principle and contents of post-project assessment of environmental impact on current Chinese nuclear facilities operation. It is considered that to start the post-project assessment of environmental impact, perfect the post-project assessment mechanism, introduce the post-project assessment into environmental impact assessment system are just at the night time. (author)

Assessing corporate project impacts in changeable contexts: A human rights perspective

Energy Technology Data Exchange (ETDEWEB)

Salcito, Kendyl, E-mail: kendyl.salcito@unibas.ch [Department of Epidemiology and Public Health, Swiss Tropical and Public Health Institute, P.O. Box, CH-4002 Basel (Switzerland); University of Basel, P.O. Box, CH-4003 Basel (Switzerland); NomoGaia, 1900 Wazee Street, Suite 303, Denver, CO 80202 (United States); NewFields, LLC, Denver, CO 80202 (United States); Singer, Burton H., E-mail: bhsinger@epi.ufl.edu [Emerging Pathogens Institute, University of Florida, Gainesville, FL 32610 (United States); Krieger, Gary R., E-mail: gkrieger@newfields.com [NewFields, LLC, Denver, CO 80202 (United States); Weiss, Mitchell G., E-mail: mitchell-g.weiss@unibas.ch [Department of Epidemiology and Public Health, Swiss Tropical and Public Health Institute, P.O. Box, CH-4002 Basel (Switzerland); University of Basel, P.O. Box, CH-4003 Basel (Switzerland); Wielga, Mark, E-mail: wielga@nomogaia.org [NomoGaia, 1900 Wazee Street, Suite 303, Denver, CO 80202 (United States); NewFields, LLC, Denver, CO 80202 (United States); Utzinger, Jürg, E-mail: juerg.utzinger@unibas.ch [Department of Epidemiology and Public Health, Swiss Tropical and Public Health Institute, P.O. Box, CH-4002 Basel (Switzerland); University of Basel, P.O. Box, CH-4003 Basel (Switzerland)

2014-07-01

Project-level impact assessment was originally conceived as a snapshot taken in advance of project implementation, contrasting current conditions with a likely future scenario involving a variety of predicted impacts. Current best practice guidance has encouraged a shift towards longitudinal assessments from the pre-project stage through the implementation and operating phases. Experience and study show, however, that assessment of infrastructure-intensive projects rarely endures past the project's construction phase. Negative consequences for environmental, social and health outcomes have been documented. Such consequences clarify the pressing need for longitudinal assessment in each of these domains, with human rights impact assessment (HRIA) as an umbrella over, and critical augmentation of, environmental, social and health assessments. Project impacts on human rights are more closely linked to political, economic and other factors beyond immediate effects of a company's policy and action throughout the project lifecycle. Delineating these processes requires an adequate framework, with strategies for collecting longitudinal data, protocols that provide core information for impact assessment and guidance for adaptive mitigation strategies as project-related effects change over time. This article presents general principles for the design and implementation of sustained, longitudinal HRIA, based on experience assessing and responding to human rights impact in a uranium mining project in Malawi. The case study demonstrates the value of longitudinal assessment both for limiting corporate risk and improving human welfare. - Graphical abstract: Assessing changes in human rights condition as affected by both project and context, over time. - Highlights: • Corporate capital projects affect human rights in myriad ways. • Ongoing, longitudinal impact assessment techniques are needed. • We present an approach for conducting longitudinal human rights impact

Assessing corporate project impacts in changeable contexts: A human rights perspective

International Nuclear Information System (INIS)

Salcito, Kendyl; Singer, Burton H.; Krieger, Gary R.; Weiss, Mitchell G.; Wielga, Mark; Utzinger, Jürg

2014-01-01

Project-level impact assessment was originally conceived as a snapshot taken in advance of project implementation, contrasting current conditions with a likely future scenario involving a variety of predicted impacts. Current best practice guidance has encouraged a shift towards longitudinal assessments from the pre-project stage through the implementation and operating phases. Experience and study show, however, that assessment of infrastructure-intensive projects rarely endures past the project's construction phase. Negative consequences for environmental, social and health outcomes have been documented. Such consequences clarify the pressing need for longitudinal assessment in each of these domains, with human rights impact assessment (HRIA) as an umbrella over, and critical augmentation of, environmental, social and health assessments. Project impacts on human rights are more closely linked to political, economic and other factors beyond immediate effects of a company's policy and action throughout the project lifecycle. Delineating these processes requires an adequate framework, with strategies for collecting longitudinal data, protocols that provide core information for impact assessment and guidance for adaptive mitigation strategies as project-related effects change over time. This article presents general principles for the design and implementation of sustained, longitudinal HRIA, based on experience assessing and responding to human rights impact in a uranium mining project in Malawi. The case study demonstrates the value of longitudinal assessment both for limiting corporate risk and improving human welfare. - Graphical abstract: Assessing changes in human rights condition as affected by both project and context, over time. - Highlights: • Corporate capital projects affect human rights in myriad ways. • Ongoing, longitudinal impact assessment techniques are needed. • We present an approach for conducting longitudinal human rights impact assessment

Assessment of impact due to entrainment of ichthyoplankton

International Nuclear Information System (INIS)

Horst, T.J.

1975-01-01

Three approaches to the assessment of impact associated with the entrainment of ichthyoplankton into power stations are discussed. The first is the estimation of the probability of mortality for those organisms entrained. The second is the assessment to the fish populations which have the egg and larvae life stages entrained. The third approach is the assessment of impact to the community or ecosystem. Some models are presented as examples for each of the three approaches. (U.S.)

Let us make impact assessment more accessible

International Nuclear Information System (INIS)

Alton, Charles C.; Underwood, P. Benjamin

2003-01-01

Impact assessment professionals have traditionally written documents for themselves. Often, their work appears to be received with indifference by business professionals and decision makers who have different needs and interests. The two groups conflict when they should be thinking and planning together at the 'big picture' level (including the understanding of the social factors at work in environmental impact assessment) and developing related and workable 'site-specific' implementation that characterizes socially acceptable decision making. To achieve this goal, the IA professional needs to rethink the approach. IA professionals often focus on the traditional 'physical' environment, confining the assessment to facts and figures about hard aspects of the environment. Reams of detailed data are compiled to demonstrate impact assessment and to achieve a degree of certainty and precision. However, the sheer bulk of data assures that it will not be read by those who most need to use it. The IA professional must learn to prepare assessments that effectively consider less quantifiable, 'softer' aspects of the environment. We advocate preparation of an impact analysis that management decision makers and environmental stewards can use as a reference tool. The goal is to reduce or eliminate the hundreds of unread pages containing lengthy modeling runs and obscure details, and instead to prepare documents that are useful in both courtroom and boardroom. This convenient and quick-study 'consumer report' style combines with a tiered decision making process that assures broad long-term thinking and planning, and focused short-term detailed implementation, using a level of detail appropriate to the decision at hand. This methodology integrates social factors into decision making, so as to provide meaningful discussion and analysis. These principles, which have been proven in US boardrooms and courtrooms, will be illustrated with actual examples from broad policy-level impact

On the assessment of extremely low breakdown probabilities by an inverse sampling procedure [gaseous insulation

DEFF Research Database (Denmark)

Thyregod, Poul; Vibholm, Svend

1991-01-01

the flashover probability function and the corresponding distribution of first breakdown voltages under the inverse sampling procedure, and show how this relation may be utilized to assess the single-shot flashover probability corresponding to the observed average first breakdown voltage. Since the procedure......First breakdown voltages obtained under the inverse sampling procedure assuming a double exponential flashover probability function are discussed. An inverse sampling procedure commences the voltage application at a very low level, followed by applications at stepwise increased levels until...... is based on voltage applications in the neighbourhood of the quantile under investigation, the procedure is found to be insensitive to the underlying distributional assumptions...

10 CFR 50.150 - Aircraft impact assessment.

Science.gov (United States)

2010-01-01

... maintained. (2) Aircraft impact characteristics.1 The assessment must be based on the beyond-design-basis... capabilities identified in paragraph (a)(1) of this section meet the assessment requirements in paragraph (a)(1... modified design features and functional capabilities continue to meet the assessment requirements in...

Military Ecological Risk Assessment Framework (MERAF) for Assessment of Risks of Military Training and Testing to Natural Resources

Energy Technology Data Exchange (ETDEWEB)

Suter II, G.W.

2003-06-18

The objective of this research is to provide the DoD with a framework based on a systematic, risk-based approach to assess impacts for management of natural resources in an ecosystem context. This risk assessment framework is consistent with, but extends beyond, the EPA's ecological risk assessment framework, and specifically addresses DoD activities and management needs. MERAF is intended to be consistent with existing procedures for environmental assessment and planning with DoD testing and training. The intention is to supplement these procedures rather than creating new procedural requirements. MERAF is suitable for use for training and testing area assessment and management. It does not include human health risks nor does it address specific permitting or compliance requirements, although it may be useful in some of these cases. Use of MERAF fits into the National Environmental Policy Act (NEPA) process by providing a consistent and rigorous way of organizing and conducting the technical analysis for Environmental Impact Statements (EISs) (Sigal 1993; Carpenter 1995; Canter and Sadler 1997). It neither conflicts with, nor replaces, procedural requirements within the NEPA process or document management processes already in place within DoD.

Chinese life cycle impact assessment factors

DEFF Research Database (Denmark)

Yang, Jianxin; Nielsen, Per Henning

2001-01-01

The methodological basis and procedures for determination of Chinese normalization references and weighting factors according to the EDIP-method is described. According to Chinese industrial development intensity and population density, China was divided into three regions and the normalization...... was determined as the normalization reference (ER ( j)90) divided by society's target contribution in the year 2000 abased on Chinese political reduction plans, ER ( j)(T2000). This paper presents and discuss results obtained for eight different environmental impact categories relevant for China: global warming...

Procedures for conducting probabilistic safety assessment for non-reactor nuclear facilities

International Nuclear Information System (INIS)

2002-01-01

A well performed and adequately documented safety assessment of a nuclear facility will serve as a basis to determine whether the facility complies with the safety objectives, principles and criteria as stipulated by the national regulatory body of the country where the facility is in operation. International experience shows that the practices and methodologies used to perform safety assessments and periodic safety re-assessment for non-reactor nuclear facilities differ significantly from county to country. Most developing countries do not have methods and guidance for safety assessment that are prescribed by the regulatory body. Typically the safety evaluation for the facility is based on a case by case assessment. Whilst conservative deterministic analyses are predominantly used as a licensing basis in many countries, recently probabilistic safety assessment (PSA) techniques have been applied as a useful complementary tool to support safety decision making. The main benefit of PSA is to provide insights into the safety aspects of facility design and operation. PSA points up the potential environmental impacts of postulated accidents, including the dominant risk contributors, and enables safety analysts to compare options for reducing risk. In order to advise on how to apply PSA methodology for the safety assessment of non-reactor nuclear facilities, the IAEA organized several consultants meetings, which led to the preparation of this TECDOC. This document is intended as guidance for the conduct of PSA in non-nuclear facilities. The main emphasis here is on the general procedural steps of a PSA that is specific for a non-reactor nuclear facility, rather than the details of the specific methods. The report is directed at technical staff managing or performing such probabilistic assessments and to promote a standardized framework, terminology and form of documentation for these PSAs. It is understood that the level of detail implied in the tasks presented in this

Underwater noise modelling for environmental impact assessment

Energy Technology Data Exchange (ETDEWEB)

Farcas, Adrian [Centre for Environment, Fisheries and Aquaculture Science (Cefas), Pakefield Road, Lowestoft, NR33 0HT (United Kingdom); Thompson, Paul M. [Lighthouse Field Station, Institute of Biological and Environmental Sciences, University of Aberdeen, Cromarty IV11 8YL (United Kingdom); Merchant, Nathan D., E-mail: nathan.merchant@cefas.co.uk [Centre for Environment, Fisheries and Aquaculture Science (Cefas), Pakefield Road, Lowestoft, NR33 0HT (United Kingdom)

2016-02-15

Assessment of underwater noise is increasingly required by regulators of development projects in marine and freshwater habitats, and noise pollution can be a constraining factor in the consenting process. Noise levels arising from the proposed activity are modelled and the potential impact on species of interest within the affected area is then evaluated. Although there is considerable uncertainty in the relationship between noise levels and impacts on aquatic species, the science underlying noise modelling is well understood. Nevertheless, many environmental impact assessments (EIAs) do not reflect best practice, and stakeholders and decision makers in the EIA process are often unfamiliar with the concepts and terminology that are integral to interpreting noise exposure predictions. In this paper, we review the process of underwater noise modelling and explore the factors affecting predictions of noise exposure. Finally, we illustrate the consequences of errors and uncertainties in noise modelling, and discuss future research needs to reduce uncertainty in noise assessments.

Underwater noise modelling for environmental impact assessment

International Nuclear Information System (INIS)

Farcas, Adrian; Thompson, Paul M.; Merchant, Nathan D.

2016-01-01

Assessment of underwater noise is increasingly required by regulators of development projects in marine and freshwater habitats, and noise pollution can be a constraining factor in the consenting process. Noise levels arising from the proposed activity are modelled and the potential impact on species of interest within the affected area is then evaluated. Although there is considerable uncertainty in the relationship between noise levels and impacts on aquatic species, the science underlying noise modelling is well understood. Nevertheless, many environmental impact assessments (EIAs) do not reflect best practice, and stakeholders and decision makers in the EIA process are often unfamiliar with the concepts and terminology that are integral to interpreting noise exposure predictions. In this paper, we review the process of underwater noise modelling and explore the factors affecting predictions of noise exposure. Finally, we illustrate the consequences of errors and uncertainties in noise modelling, and discuss future research needs to reduce uncertainty in noise assessments.

The environmental impact assessment of uranium mining in Australia

International Nuclear Information System (INIS)

Morvell, G.

2002-01-01

Federal environmental impact assessment legislation has existed in Australia since 1974. A number of uranium mines have been developed in this time, utilizing a range of mining techniques, including opencut, underground and in-situ leach. Projects have also been undertaken in a variety of geographical areas requiring consideration of diverse biodiversity, cultural heritage and social impact issues. Assessment of uranium mining proposals in Australia is also conducted in a climate of political opposition from a cross section of the Australian community. This paper outlines some of the key issues that arose during recent assessments and which provide a lead to the role of environmental impact assessment in environmental policy development. Issues are also relevant to recent assessments on a replacement nuclear reactor, shipments of waste for reprocessing and proposed assessments on proposals for low and intermediate level nuclear waste facilities. (author)

Assessing the demographic and public service impacts of repository siting

International Nuclear Information System (INIS)

Murdock, S.H.; Hamm, R.R.

1983-01-01

Demographic and public service impacts are likely to be among the most evident of those changes resulting from nuclear waste repository development. Knowledge of the characteristics of such impacts and of the means to assess them is critical. The first section of this chapter examines those likely to be unique to repositories. The second section describes the alternatives for assessing such impacts and the particular difficulties likely to affect the assessments. Given the state of development of techniques for assessing impacts and the range of factors that must be considered, perhaps their best use is as a means of sensitizing decision makers to the potential implications of their decisions. 2 tables

Post-disposal safety assessment of toxic and radioactive waste: waste types, disposal practices, disposal criteria, assessment methods and post-disposal impacts

International Nuclear Information System (INIS)

Torres, C.; Simon, I.; Little, R.H.; Charles, D.; Grogan, H.A.; Smith, G.M.; Sumerling, T.J.; Watkins, B.M.

1993-01-01

The need for safety assessments of waste disposal stems not only from the implementation of regulations requiring the assessment of environmental effects, but also from the more general need to justify decisions on protection requirements. As waste-disposal methods have become more technologically based, through the application of more highly engineered design concepts and through more rigorous and specific limitations on the types and quantities of the waste disposed, it follows that assessment procedures also must become more sophisticated. It is the overall aim of this study to improve the predictive modelling capacity for post-disposal safety assessments of land-based disposal facilities through the development and testing of a comprehensive, yet practicable, assessment framework. This report records all the work which has been undertaken during Phase 1 of the study. Waste types, disposal practices, disposal criteria and assessment methods for both toxic and radioactive waste are reviewed with the purpose of identifying those features relevant to assessment methodology development. Difference and similarities in waste types, disposal practices, criteria and assessment methods between countries, and between toxic and radioactive wastes are highlighted and discussed. Finally, an approach to identify post-disposal impacts, how they arise and their effects on humans and the environment is described

Development of Procedures to Assess Problem-Solving Competence in Computing Engineering

Science.gov (United States)

Pérez, Jorge; Vizcarro, Carmen; García, Javier; Bermúdez, Aurelio; Cobos, Ruth

2017-01-01

In the context of higher education, a competence may be understood as the combination of skills, knowledge, attitudes, values, and abilities that underpin effective and/or superior performance in a professional area. The aim of the work reported here was to design a set of procedures to assess a transferable competence, i.e., problem solving, that…

Nonspecialist Raters Can Provide Reliable Assessments of Procedural Skills

DEFF Research Database (Denmark)

Mahmood, Oria; Dagnæs, Julia; Bube, Sarah

2018-01-01

was significant (p Pearson's correlation of 0.77 for the nonspecialists and 0.75 for the specialists. The test-retest reliability showed the biggest difference between the 2 groups, 0.59 and 0.38 for the nonspecialist raters and the specialist raters, respectively (p ... was chosen as it is a simple procedural skill that is crucial to master in a resident urology program. RESULTS: The internal consistency of assessments was high, Cronbach's α = 0.93 and 0.95 for nonspecialist and specialist raters, respectively (p correlations). The interrater reliability...

Development Impact Assessment (DIA) Case Study. South Africa

Energy Technology Data Exchange (ETDEWEB)

Cox, Sadie [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Nawaz, Kathleen [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Sandor, Debra [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2015-05-19

This case study reviews South Africa’s experience in considering the impacts of climate change action on development goals, focusing on the South African energy sector and development impact assessments (DIAs) that have and could be used to influence energy policy or inform the selection of energy activities. It includes a review of assessments—conducted by government ministries, technical partners, and academic institutes and non-governmental organizations (NGOs)—that consider employment, health, and water implications of possible energy sector actions, as well as multi-criteria impact assessments.

Climate Change in Environmental Impact Assessment of Renewable Energy Projects

DEFF Research Database (Denmark)

Larsen, Sanne Vammen

2012-01-01

Many renewable energy projects are subject to EIA. However a question that surfaces is what use an impact assessment is when the project is ‘good for the environment’? One of the current topics receiving much attention in impact assessment is climate change and how this factor is integrated...... in impact assessments. This warrants the question: How do we assess the climate change related impacts of a project that inherently has a positive effect on climate? This paper is based on a document study of EIA reports from Denmark. The results show that climate change is included in most of the EIA...... reports reviewed, and that only climate change mitigation is in focus while adaptation is absent. Also the results point to focus on positive impacts, while the indirect negative impacts are less apparent. This leads to a discussion of the results in the light of the purpose of EIA....

Crush performance of redwood for developing design procedures for impact limiters

International Nuclear Information System (INIS)

Cramer, S.M.; Hermanson, J.C.; McMurtry, W.M.

1995-01-01

Containers for the transportation of hazardous and radioactive materials incorporate redwood in impact limiters. Redwood is an excellent energy absorber, but only the most simplistic information exists on its crush properties. Tbe stress-strain interrelationship for any wood species subject to three-dimensional stresses is largely unknown for any all stress condition and wood behavior at both high strains and high strain-rates is known only in general terms. Both stress-strain and crush failure theories have been developed based only on uniaxial load tests. The anisotropy of wood adds an additional complexity to measuring wood response and developing suitable theories to describe it. A long history of wood utilization in the building industry has led to design procedures and property information related to simple uniaxial loadings that do not inflict damage to the wood. This lack of knowledge may be surprising for a material that has a long history of engineered use, but the result is difficulty in utilizing wood in more sophisticated designs such as impact limiters. This study provides a step toward filling the information gap on wood material response for high performance applications such as impact limiters

Procedural advice on self-assessment and task selection in learner-controlled education

NARCIS (Netherlands)

Taminiau, Bettine; Kester, Liesbeth; Corbalan, Gemma; Van Merriënboer, Jeroen; Kirschner, Paul A.

2010-01-01

Taminiau, E. M. C., Kester, L., Corbalan, G., Van Merriënboer, J. J. G., & Kirschner, P. A. (2010, July). Procedural advice on self-assessment and task selection in learner-controlled education. Paper presented at the Junior Researchers of EARLI Conference 2010, Frankfurt, Germany.

Impact assessment of commodity standards

NARCIS (Netherlands)

Ruben, Ruerd

2017-01-01

Voluntary commodity standards are widely used to enhance the performance of tropical agro-food chains and to support the welfare and sustainability of smallholder farmers. Different methods and approaches are used to assess the effectiveness and impact of these certification schemes at

Power station impacts: socio-economic impact assessment

International Nuclear Information System (INIS)

Glasson, John; Elson, Martin; Barrett, Brendan; Wee, D. Van der

1987-01-01

The aim of this study is to assess the local social and economic impacts of a proposed nuclear power station development at Hinkley Point in Somerset. The proposed development, Hinkley Point C, would be an addition to the existing Hinkley Point A Magnox station, commissioned in 1965, and the Hinkley Point B Advanced Gas Cooled Reactor (AGR) station, commissioned in 1976. It is hoped that the study will be of assistance to the CEGB, the Somerset County and District Councils and other agencies in their studies of the proposed development. In addition, the study seeks to apply and further develop the methodology and results from previous studies by the Power Station Impacts (PSI) team for predicting the social and economic effects of proposed power station developments on their localities. (author)

Multicriteria decision analysis in ranking of analytical procedures for aldrin determination in water.

Science.gov (United States)

Tobiszewski, Marek; Orłowski, Aleksander

2015-03-27

The study presents the possibility of multi-criteria decision analysis (MCDA) application when choosing analytical procedures with low environmental impact. A type of MCDA, Preference Ranking Organization Method for Enrichment Evaluations (PROMETHEE), was chosen as versatile tool that meets all the analytical chemists--decision makers requirements. Twenty five analytical procedures for aldrin determination in water samples (as an example) were selected as input alternatives to MCDA analysis. Nine different criteria describing the alternatives were chosen from different groups--metrological, economical and the most importantly--environmental impact. The weights for each criterion were obtained from questionnaires that were sent to experts, giving three different scenarios for MCDA results. The results of analysis show that PROMETHEE is very promising tool to choose the analytical procedure with respect to its greenness. The rankings for all three scenarios placed solid phase microextraction and liquid phase microextraction--based procedures high, while liquid-liquid extraction, solid phase extraction and stir bar sorptive extraction--based procedures were placed low in the ranking. The results show that although some of the experts do not intentionally choose green analytical chemistry procedures, their MCDA choice is in accordance with green chemistry principles. The PROMETHEE ranking results were compared with more widely accepted green analytical chemistry tools--NEMI and Eco-Scale. As PROMETHEE involved more different factors than NEMI, the assessment results were only weakly correlated. Oppositely, the results of Eco-Scale assessment were well-correlated as both methodologies involved similar criteria of assessment. Copyright © 2015 Elsevier B.V. All rights reserved.

Assessing the environmental impacts of freshwater consumption in LCA.

Science.gov (United States)

Pfister, Stephan; Koehler, Annette; Hellweg, Stefanie

2009-06-01

A method for assessing the environmental impacts of freshwater consumption was developed. This method considers damages to three areas of protection: human health, ecosystem quality, and resources. The method can be used within most existing life-cycle impact assessment (LCIA) methods. The relative importance of water consumption was analyzed by integrating the method into the Eco-indicator-99 LCIA method. The relative impact of water consumption in LCIA was analyzed with a case study on worldwide cotton production. The importance of regionalized characterization factors for water use was also examined in the case study. In arid regions, water consumption may dominate the aggregated life-cycle impacts of cotton-textile production. Therefore, the consideration of water consumption is crucial in life-cycle assessment (LCA) studies that include water-intensive products, such as agricultural goods. A regionalized assessment is necessary, since the impacts of water use vary greatly as a function of location. The presented method is useful for environmental decision-support in the production of water-intensive products as well as for environmentally responsible value-chain management.

Spatial information in public consultation within environmental impact assessments

NARCIS (Netherlands)

Mwenda, A.N.

2015-01-01

Thesis Summary

Spatial information in public consultation within Environmental Impact Assessments

Angela N. Mwenda

Established in the United States of America in 1970, Environmental Impact Assessment (EIA) is an interdisciplinary approach that

Health Impact Assessment: Linking Public Health to ...

Science.gov (United States)

The goal of this presentation is to explore how HIA can help inform hazardous waste permitting regulations and incorporate community vulnerability and cumulative impacts to their potential health risks into permitting decision making by the California Department of Toxic Substances Control. Presented the Health Impact Assessment (HIA) at the State of California Cumulative Impacts and Community Vulnerability Symposium on July 27 in Diamond Bar, CA.

Impact assessment in EU lawmaking

NARCIS (Netherlands)

Meuwese, Anne Claartje Margreet

2008-01-01

The European Commission introduced impact assessment (IA) in 2002 following recommendations from the Mandelkern group on Better Regulation. The basic rationale of IA is that proposals must be prepared on the basis of an analysis of whether regulatory intervention is needed and whether it is

Environmental Impact Assessment in Antarctica

NARCIS (Netherlands)

Bastmeijer, C.J.; Roura, R.; Bastmeijer, K.; Koivurova, T.

2008-01-01

This publication focuses on the instrument of Environmental Impact Assessment (EIA) that has been developed within the Antarctic Treaty System (ATS) as one of the tools to promote environmental protection. The states involved in the ATS already recognized the importance of this instrument in 1975

Addressing gender inequality in science: the multifaceted challenge of assessing impact

DEFF Research Database (Denmark)

Kalpazidou Schmidt, Evanthia; Cacace, Marina

2017-01-01

that the problem of gender inequality is rooted in so many and interrelated factors that program impact assessment has to be multidimensional and complex. Having a conceptual approach grounded in the notion of complexity as a point of departure, the article presents an innovative impact assessment tool, pointing...... to effective ways to assess the impact of gender equality programs....... on the assessment of 125 programs for gender equality implemented in research organizations in Europe, North America, and Australia, we argue that holistic approaches and multidimensional frames of reference are needed for impact assessment, also to improve program design and policy. Our analysis shows...

Accounting for uncertainty factors in biodiversity impact assessment: lessons from a case study

International Nuclear Information System (INIS)

Geneletti, D.; Beinat, E.; Chung, C.F.; Fabbri, A.G.; Scholten, H.J.

2003-01-01

For an Environmental Impact Statement (EIS) to effectively contribute to decision-making, it must include one crucial step: the estimation of the uncertainty factors affecting the impact evaluation and of their effect on the evaluation results. Knowledge of the uncertainties better orients the strategy of the decision-makers and underlines the most critical data or methodological steps of the procedure. Accounting for uncertainty factors is particularly relevant when dealing with ecological impacts, whose forecasts are typically affected by a high degree of simplification. By means of a case study dealing with the evaluation of road alternatives, this paper explores and discusses the main uncertainties that are related to the typical stages of a biodiversity impact assessment: uncertainty in the data that are used, in the methodologies that are applied, and in the value judgments provided by the experts. Subsequently, the effects of such uncertainty factors are tracked back to the result of the evaluation, i.e., to the relative performance of the project alternatives under consideration. This allows to test the sensitivity of the results, and consequently to provide a more informative ranking of the alternatives. The papers concludes by discussing the added-value for decision-making provided by uncertainty analysis within EIA

A limited assessment of the ASEP human reliability analysis procedure using simulator examination results

International Nuclear Information System (INIS)

Gore, B.R.; Dukelow, J.S. Jr.; Mitts, T.M.; Nicholson, W.L.

1995-10-01

This report presents a limited assessment of the conservatism of the Accident Sequence Evaluation Program (ASEP) human reliability analysis (HRA) procedure described in NUREG/CR-4772. In particular, the, ASEP post-accident, post-diagnosis, nominal HRA procedure is assessed within the context of an individual's performance of critical tasks on the simulator portion of requalification examinations administered to nuclear power plant operators. An assessment of the degree to which operator perforn:Lance during simulator examinations is an accurate reflection of operator performance during actual accident conditions was outside the scope of work for this project; therefore, no direct inference can be made from this report about such performance. The data for this study are derived from simulator examination reports from the NRC requalification examination cycle. A total of 4071 critical tasks were identified, of which 45 had been failed. The ASEP procedure was used to estimate human error probability (HEP) values for critical tasks, and the HEP results were compared with the failure rates observed in the examinations. The ASEP procedure was applied by PNL operator license examiners who supplemented the limited information in the examination reports with expert judgment based upon their extensive simulator examination experience. ASEP analyses were performed for a sample of 162 critical tasks selected randomly from the 4071, and the results were used to characterize the entire population. ASEP analyses were also performed for all of the 45 failed critical tasks. Two tests were performed to assess the bias of the ASEP HEPs compared with the data from the requalification examinations. The first compared the average of the ASEP HEP values with the fraction of the population actually failed and it found a statistically significant factor of two bias on the average

Using the Five Domains Model to Assess the Adverse Impacts of Husbandry, Veterinary, and Equitation Interventions on Horse Welfare

Science.gov (United States)

McGreevy, Paul; Berger, Jeannine; de Brauwere, Nic; Doherty, Orla; Harrison, Anna; Fiedler, Julie; Jones, Claudia; McDonnell, Sue; McLean, Andrew; Nakonechny, Lindsay; Preshaw, Liane; Tzioumis, Vicky; Webster, John; Wolfensohn, Sarah; Yeates, James; Jones, Bidda

2018-01-01

Simple Summary Using an adaptation of the domain-based welfare assessment model, a panel of horse welfare professionals (with professional expertise in psychology, equitation science, veterinary science, education, welfare, equestrian coaching, advocacy, and community engagement) assessed the perceived harms, if any, resulting from 116 interventions that are commonly applied to horses. Scores for Domain 5 (the integrated mental impact) gathered after extensive discussion during a four-day workshop aligned well with overall impact scores assigned by the same panellists individually before the workshop, although some rankings changed after workshop participation. Domain 4 (Behaviour) had the strongest association with Domain 5, whilst Domain 1 (Nutrition) had the weakest association with Domain 5, implying that the panellists considered commonly applied nutritional interventions to have less of a bearing on subjective mental state than commonly applied behavioural restrictions. The workshop defined each intervention, and stated assumptions around each, resulting in a set of exemplar procedures that could be used in future equine welfare assessments. Abstract The aim of this study was to conduct a series of paper-based exercises in order to assess the negative (adverse) welfare impacts, if any, of common interventions on domestic horses across a broad range of different contexts of equine care and training. An international panel (with professional expertise in psychology, equitation science, veterinary science, education, welfare, equestrian coaching, advocacy, and community engagement; n = 16) met over a four-day period to define and assess these interventions, using an adaptation of the domain-based assessment model. The interventions were considered within 14 contexts: C1 Weaning; C2 Diet; C3 Housing; C4 Foundation training; C5 Ill-health and veterinary interventions (chiefly medical); C6 Ill-health and veterinary interventions (chiefly surgical); C7 Elective

Probabilistic assessment of NPP safety under aircraft impact

International Nuclear Information System (INIS)

Birbraer, A.N.; Roleder, A.J.; Arhipov, S.B.

1999-01-01

Methodology of probabilistic assessment of NPP safety under aircraft impact is described below. The assessment is made taking into account not only the fact of aircraft fall onto the NPP building, but another casual parameters too, namely an aircraft class, velocity and mass, as well as point and angle of its impact with the building structure. This analysis can permit to justify the decrease of the required structure strength and dynamic loads on the NPP equipment. It can also be especially useful when assessing the safety of existing NPP. (author)

76 FR 37823 - Published Privacy Impact Assessments on the Web

Science.gov (United States)

2011-06-28

... DEPARTMENT OF HOMELAND SECURITY Office of the Secretary Published Privacy Impact Assessments on... Department. These assessments were approved and published on the Privacy Office's Web site between March 31... 31, 2011, the Chief Privacy Officer of the DHS approved and published ten Privacy Impact Assessments...

Assessing human rights impacts in corporate development projects

Energy Technology Data Exchange (ETDEWEB)

Salcito, Kendyl, E-mail: kendyl.salcito@unibas.ch [Department of Epidemiology and Public Health, Swiss Tropical and Public Health Institute, P.O. Box, CH-4002 Basel (Switzerland); University of Basel, P.O. Box, CH-4003 Basel (Switzerland); NomoGaia, 1900 Wazee Street, Suite 303, Denver, CO 80202 (United States); NewFields, LLC, Denver, CO 80202 (United States); Utzinger, Jürg, E-mail: juerg.utzinger@unibas.ch [Department of Epidemiology and Public Health, Swiss Tropical and Public Health Institute, P.O. Box, CH-4002 Basel (Switzerland); University of Basel, P.O. Box, CH-4003 Basel (Switzerland); Weiss, Mitchell G., E-mail: Mitchell-g.Weiss@unibas.ch [Department of Epidemiology and Public Health, Swiss Tropical and Public Health Institute, P.O. Box, CH-4002 Basel (Switzerland); University of Basel, P.O. Box, CH-4003 Basel (Switzerland); Münch, Anna K., E-mail: annak.muench@gmail.com [Emerging Pathogens Institute, University of Florida, Gainesville, FL 32610 (United States); Singer, Burton H., E-mail: bhsinger@epi.ufl.edu [Emerging Pathogens Institute, University of Florida, Gainesville, FL 32610 (United States); Krieger, Gary R., E-mail: gkrieger@newfields.com [NewFields, LLC, Denver, CO 80202 (United States); Wielga, Mark, E-mail: wielga@nomogaia.org [NomoGaia, 1900 Wazee Street, Suite 303, Denver, CO 80202 (United States); NewFields, LLC, Denver, CO 80202 (United States)

2013-09-15

Human rights impact assessment (HRIA) is a process for systematically identifying, predicting and responding to the potential impact on human rights of a business operation, capital project, government policy or trade agreement. Traditionally, it has been conducted as a desktop exercise to predict the effects of trade agreements and government policies on individuals and communities. In line with a growing call for multinational corporations to ensure they do not violate human rights in their activities, HRIA is increasingly incorporated into the standard suite of corporate development project impact assessments. In this context, the policy world's non-structured, desk-based approaches to HRIA are insufficient. Although a number of corporations have commissioned and conducted HRIA, no broadly accepted and validated assessment tool is currently available. The lack of standardisation has complicated efforts to evaluate the effectiveness of HRIA as a risk mitigation tool, and has caused confusion in the corporate world regarding company duties. Hence, clarification is needed. The objectives of this paper are (i) to describe an HRIA methodology, (ii) to provide a rationale for its components and design, and (iii) to illustrate implementation of HRIA using the methodology in two selected corporate development projects—a uranium mine in Malawi and a tree farm in Tanzania. We found that as a prognostic tool, HRIA could examine potential positive and negative human rights impacts and provide effective recommendations for mitigation. However, longer-term monitoring revealed that recommendations were unevenly implemented, dependent on market conditions and personnel movements. This instability in the approach to human rights suggests a need for on-going monitoring and surveillance. -- Highlights: • We developed a novel methodology for corporate human rights impact assessment. • We piloted the methodology on two corporate projects—a mine and a plantation. �

Assessing human rights impacts in corporate development projects

International Nuclear Information System (INIS)

Salcito, Kendyl; Utzinger, Jürg; Weiss, Mitchell G.; Münch, Anna K.; Singer, Burton H.; Krieger, Gary R.; Wielga, Mark

2013-01-01

Human rights impact assessment (HRIA) is a process for systematically identifying, predicting and responding to the potential impact on human rights of a business operation, capital project, government policy or trade agreement. Traditionally, it has been conducted as a desktop exercise to predict the effects of trade agreements and government policies on individuals and communities. In line with a growing call for multinational corporations to ensure they do not violate human rights in their activities, HRIA is increasingly incorporated into the standard suite of corporate development project impact assessments. In this context, the policy world's non-structured, desk-based approaches to HRIA are insufficient. Although a number of corporations have commissioned and conducted HRIA, no broadly accepted and validated assessment tool is currently available. The lack of standardisation has complicated efforts to evaluate the effectiveness of HRIA as a risk mitigation tool, and has caused confusion in the corporate world regarding company duties. Hence, clarification is needed. The objectives of this paper are (i) to describe an HRIA methodology, (ii) to provide a rationale for its components and design, and (iii) to illustrate implementation of HRIA using the methodology in two selected corporate development projects—a uranium mine in Malawi and a tree farm in Tanzania. We found that as a prognostic tool, HRIA could examine potential positive and negative human rights impacts and provide effective recommendations for mitigation. However, longer-term monitoring revealed that recommendations were unevenly implemented, dependent on market conditions and personnel movements. This instability in the approach to human rights suggests a need for on-going monitoring and surveillance. -- Highlights: • We developed a novel methodology for corporate human rights impact assessment. • We piloted the methodology on two corporate projects—a mine and a plantation. • Human

The methodology of environmental impacts assessment of environmentally hazardous facilities

OpenAIRE

Adamenko, Yaroslav

2017-01-01

The article deals with the methodology of environmental impacts assessment of environmentally hazardous facilities and activities. The stages of evaluation of environmental impacts are proved. The algorithm and technology of decision-making in the system of environmental impact assessments based on a multi-criteria utility theory are proposed.

Environmental impact assessment in practice: A gender critique

International Nuclear Information System (INIS)

Kurian, P.A.; Purdue Univ., West Lafayette, IN

1995-01-01

The author evaluates the extent to which environmental impact assessment (EIA) as conceptualized by EIA systems is a gendered process. Through a discourse analysis of in-depth interviews with bureaucrats, technocrats, and activists involved with the Sardar Sarovar dam project in India, the author examines the practice of EIA in a Third World country. She uses a theoretical framework, informed by a theory of gender, to evaluate the interviews. In practice, EIA is marked by gender biases that ignore the gender-specific nature of impacts. Such biases distort the impact assessment process, making environmental sustainability difficult, if not impossible, to achieve

Ecological research on offshore wind energy development in the North and Baltic sea. Part: Environmental planning instruments: Environmental Impacts Assessment (EIA), Habitats Assessment and Strategic Environmetnal Assessment (SEA). Volumes 1-4 and final report; Oekologische Begleitforschung zur Windenergienutzung im Offshore-Bereich der Nord- und Ostsee. Teilbereich 'Instrumente des Umwelt- und Naturschutzes: Strategische Umweltpruefung, Umweltvertraeglichkeitspruefung und Flora-Fauna-Habitat-Vertraeglichkeitspruefung'. Band 1-4 und Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Koeppel, J.; Langenheld, A.; Peters, W.; Wende, W.; Sommer, S.; Finger, A.; Koeller, J.; Kraetzschmer, D.; Kerber, N.; Mahlburg, S.; Mueller, C.

2003-07-01

Within the licensing procedure of offshore wind farms several environmental planning instruments have to be taken into account to assess the probable effects of turbines on the marine environment. So far only little experiences were available on how to fulfil legal and methodical demands with regard to these environmental planning instruments offshore. Hence it was the principle task of this project to analyse how instruments like the environmental impacts assessment (EIA), the habitats assessment and the strategic environmental assessment (SEA) can be adapted to the special conditions of the marine environment and the legal requirements of the licensing procedure in the German EEZ according to the offshore installations ordinance. Since according to the offshore installations ordinance the construction and operation of offshore wind farms can only be refused for environmental reasons when the marine environment is endangered, the project first investigated for different aspects of the marine environment (e.g. marine mammals, birds, benthos, visual landscape) which kind of conflicts can possibly be caused by the construction and operation of turbines and of which legal significance they are with regard to the licensing procedure. Referring to those environmental impacts which have been considered as relevant for the licensing procedure the state of knowledge has been investigated by means of expert interviews and literature research. Practicable starting points for the impact assessment were suggested. With regard to the required environmental assessment within the licensing procedure one result of the project is a structured documentation of the standard of knowledge (volume I). Further on the project developed proposals for the application of the planning instruments EIA, habitats assessment and SEA offshore based on legal regulations. The result is a catalogue of requirements regarding the content and proceedings of the instruments implementation in connection

Institutionalizing policy-level health impact assessment in Europe: is coupling health impact assessment with strategic environmental assessment the next step forward?

Science.gov (United States)

Wright, John; Parry, Jayne; Scully, Edward

2005-06-01

European Union (EU) Member States are interested in using health impact assessment (HIA) as a means of safeguarding their obligations to protect human health under the 1997 Treaty of Amsterdam. However, several have encountered difficulties institutionalizing HIA with the policy-making process. As a consequence, the World Health Organization (WHO) Regional Office for Europe has suggested coupling HIA with strategic environmental assessment (SEA). Traditionally, the incorporation of HIA into other forms of impact assessment has been resisted, for fear of losing its focus on health issues to environmental concerns, and compromising its social model of health with the introduction of biophysical indicators. But can these fears be substantiated? In this paper, we investigate the grounds for such concerns by reviewing the relevant policy documents and departmental guidelines of four non-European countries that have considered the use of integrated assessment. We found that the case for associating HIA with SEA in Europe is strong, and offers potential solutions to problems of screening, theoretical framework, causal pathways and ready entry to the policy process. Coupling HIA with SEA may thus be the next step forward in a longer journey towards institutionalizing HIA as an independent policy-linked device.

Evidence-based severity assessment: Impact of repeated versus single open-field testing on welfare in C57BL/6J mice.

Science.gov (United States)

Bodden, Carina; Siestrup, Sophie; Palme, Rupert; Kaiser, Sylvia; Sachser, Norbert; Richter, S Helene

2018-01-15

According to current guidelines on animal experiments, a prospective assessment of the severity of each procedure is mandatory. However, so far, the classification of procedures into different severity categories mainly relies on theoretic considerations, since it is not entirely clear which of the various procedures compromise the welfare of animals, or, to what extent. Against this background, a systematic empirical investigation of the impact of each procedure, including behavioral testing, seems essential. Therefore, the present study was designed to elucidate the effects of repeated versus single testing on mouse welfare, using one of the most commonly used paradigms for behavioral phenotyping in behavioral neuroscience, the open-field test. In an independent groups design, laboratory mice (Mus musculus f. domestica) experienced either repeated, single, or no open-field testing - procedures that are assigned to different severity categories. Interestingly, testing experiences did not affect fecal corticosterone metabolites, body weights, elevated plus-maze or home cage behavior differentially. Thus, with respect to the assessed endocrinological, physical, and behavioral outcome measures, no signs of compromised welfare could be detected in mice that were tested in the open-field repeatedly, once, or, not at all. These findings challenge current classification guidelines and may, furthermore, stimulate systematic research on the severity of single procedures involving living animals. Copyright © 2017 Elsevier B.V. All rights reserved.

3.1.SUIT. Draft EA procedure applicable to historical areas active conservation

DEFF Research Database (Denmark)

Algreen-Ussing, Gregers; Wedebrunn, Ola

2002-01-01

This document is a preliminary draft for an Environmental Impact Assessment procedure. Its aim is to provide draft guidelines for the assessment of likely significant effects of urban development projects on the urban environment including material assets and cultural heritage. This procedure...... is intended as a way to propose and ensure an active conservation policy for urban historical areas. It is based on state-of-the-art methods and the knowledge of the experts involved in the SUIT project. It is also based on the guidelines presenting the grid of analysis to be used by stakeholders in a joint...

Health impact assessment in environmental impact assessment in China: Status, practice and problems

International Nuclear Information System (INIS)

Chang, I-Shin; Yilihamu, Qimanguli; Wu, Jing; Wu, Huilei; Nan, Bo

2017-01-01

In China, the environmental impact assessment (EIA) system has gradually developed into an integrated evaluation system, owing to continuous improvement on institutional framework, system infrastructure, technical methods and professionals training, since EIA was first introduced in 1979. Though health impact assessment (HIA) is a part of the EIA system, the development of HIA is so slow as to remain at the early developing stage. This research aims to understand the extent and main issues concerning “health considerations” under the context of EIA, in China. Through case study on 42 environmental impact statements, the results demonstrate that HIA was not implemented in most of the cases, and health issues were not even mentioned in more than half of these cases. Where HIA was implemented, various problems were revealed through this study, including lacks of systematic approaching tools, insufficient supporting data on health effects, ineffective public participation, limited health considerations on biophysics, and so forth. Nevertheless, these problems can be attributed to lacks of legal supports, systematic evaluation methods, knowledge on evaluation technologies, and professional training institutions for HIA in China. In order to improve HIA methodologies, technologies, and management, to perfect HIA evaluation system, and to enhance public participation system within HIA, some recommendations from institutional, technical, administrative, and managerial aspects were then proposed in this study. - Highlights: •The status and deficiencies of HIA in EIA in China were identified and evaluated. •There were great industrial differences for the implementation of HIA in EIA. •Public participation was not well executed within HIA in EIA.

40 CFR 227.19 - Assessment of impact.

Science.gov (United States)

2010-07-01

..., reduction in use days of recreational areas, or dollars lost in commercial fishery profits or the... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Assessment of impact. 227.19 Section... FOR THE EVALUATION OF PERMIT APPLICATIONS FOR OCEAN DUMPING OF MATERIALS Impact of the Proposed...

Scaling up: Assessing social impacts at the macro-scale

International Nuclear Information System (INIS)

Schirmer, Jacki

2011-01-01

Social impacts occur at various scales, from the micro-scale of the individual to the macro-scale of the community. Identifying the macro-scale social changes that results from an impacting event is a common goal of social impact assessment (SIA), but is challenging as multiple factors simultaneously influence social trends at any given time, and there are usually only a small number of cases available for examination. While some methods have been proposed for establishing the contribution of an impacting event to macro-scale social change, they remain relatively untested. This paper critically reviews methods recommended to assess macro-scale social impacts, and proposes and demonstrates a new approach. The 'scaling up' method involves developing a chain of logic linking change at the individual/site scale to the community scale. It enables a more problematised assessment of the likely contribution of an impacting event to macro-scale social change than previous approaches. The use of this approach in a recent study of change in dairy farming in south east Australia is described.

Methods of Environmental Impact Assessment in Colombia

Directory of Open Access Journals (Sweden)

Javier Toro Calderón

2013-10-01

Full Text Available The Environmental Impact Assessment (EIA in Colombia constitutes the primary tool for making decisions with respect to projects, works and activities (PWA with potential for significant environmental impacts. In the case of the infrastructure of the PWA, the EIA is mandatory and determines the environmental license (EL for construction and operation. This paper analyzes the methods used to assess the environmental impact of the PWA that have applied for licenses with the Ministry of Environment and Sustainable Development. It was found that the method most frequently used is the qualitative proposal by Conesa, with modifications that reduce the effectiveness of the EIA and favor the subjectivity and bias of the evaluator. Finally a series of recom­mendations to improve the process in the country are proposed.

Data for the screening assessment. Volume 1: Text, Columbia River Comprehensive Impact Assessment

International Nuclear Information System (INIS)

Miley, T.B.; O'Neil, T.K.; Gilbert, R.O.; Klevgard, L.A.; Walters, T.B.

1996-06-01

The Columbia River is a critical resource for residents of the Pacific Northwest. This resource drew the Manhattan Project's planners to the site now called Hanford to produce nuclear weapon materials. Production of those materials has left behind a legacy of chemical and radioactive contamination and materials that have, are, and will continue to pose a threat to the Columbia river for the foreseeable future. To evaluate the impact to the river from this Hanford-derived contamination, the US Department of Energy, US Environmental Protection Agency, and State of Washington Department of Ecology (the Tri-Party agencies) initiated a study referred to as the Columbia River Comprehensive Impact Assessment (CRCIA). To address concerns about the scope and direction of CRCIA as well as enhance regulator, stakeholder, tribal, and public involvement, the CRCIA Management Team was formed in August 1995. A major CRCIA Team decision was to organize CRCIA into phases, with additional phases to be identified as warranted after completion of the initial phase. The initial phase is comprised of two parts: (1) a screening assessment to evaluate the current impact to the river resulting from Hanford-derived contamination and (2) identification of requirements considered necessary by the CRCIA Management Team for a comprehensive assessment of impact to the river. The purpose of the screening assessment is to support cleanup decisions. The scope of the screening assessment is to evaluate the current risk to humans and the environment resulting from Hanford-derived contaminants. The screening assessment has the primary components of: identifying contaminants to be assessed; identifying a variety of exposure scenarios to evaluate human contaminant exposure; identifying a variety of other species to evaluate ecological contaminant exposure; and assessing risks posed by exposure of humans and other species to the contaminants

Data for the screening assessment. Volume 2: Appendices, Columbia River Comprehensive Impact Assessment

International Nuclear Information System (INIS)

Miley, T.B.; O'Neil, T.K.; Gilbert, R.O.; Klevgard, L.A.; Walters, T.B.

1996-06-01

The Columbia River is a critical resource for residents of the Pacific Northwest. This resource drew the Manhattan Project's planners to the site now called Hanford to produce nuclear weapon materials. Production of those materials has left behind a legacy of chemical and radioactive contamination and materials that have, are, and will continue to pose a threat to the Columbia river for the foreseeable future. To evaluate the impact to the river from this Hanford-derived contamination, the US Department of Energy, US Environmental Protection Agency, and State of Washington Department of Ecology (the Tri-Party agencies) initiated a study referred to as the Columbia River Comprehensive Impact Assessment (CRCIA). To address concerns about the scope and direction of CRCIA as well as enhance regulator, stakeholder, tribal, and public involvement, the CRCIA Management Team was formed in August 1995. A major CRCIA Team decision was to organize CRCIA into phases, with additional phases to be identified as warranted after completion of the initial phase. The initial phase is comprised of two parts: (1) a screening assessment to evaluate the current impact to the river resulting from Hanford-derived contamination and (2) identification of requirements considered necessary by the CRCIA Management Team for a comprehensive assessment of impact to the river. The purpose of the screening assessment is to support cleanup decisions. The scope of the screening assessment is to evaluate the current risk to humans and the environment resulting from Hanford-derived contaminants. The screening assessment has the primary components of: identifying contaminants to be assessed; identifying a variety of exposure scenarios to evaluate human contaminant exposure; identifying a variety of other species to evaluate ecological contaminant exposure; and assessing risks posed by exposure of humans and other species to the contaminants. This volume compiles the data from this study

Teachers' use of a self-assessment procedure : the role of criteria, standards, feedback and reflection

NARCIS (Netherlands)

Diggelen, van M.R.; Brok, den P.J.; Beijaard, D.

2013-01-01

This article reports on the way teachers assess their own coaching competencies regarding the development of vocational education students’ reflection skills. The participating teachers used a self-assessment procedure in which they had to judge themselves with the help of criteria and standards,

Are minimally invasive procedures harder to acquire than conventional surgical procedures?

Science.gov (United States)

Hiemstra, Ellen; Kolkman, Wendela; le Cessie, Saskia; Jansen, Frank Willem

2011-01-01

It is frequently suggested that minimally invasive surgery (MIS) is harder to acquire than conventional surgery. To test this hypothesis, residents' learning curves of both surgical skills are compared. Residents had to be assessed using a general global rating scale of the OSATS (Objective Structured Assessment of Technical Skills) for every procedure they performed as primary surgeon during a 3-month clinical rotation in gynecological surgery. Nine postgraduate-year-4 residents collected a total of 319 OSATS during the 2 years and 3 months investigation period. These assessments concerned 129 MIS (laparoscopic and hysteroscopic) and 190 conventional (open abdominal and vaginal) procedures. Learning curves (in this study defined as OSATS score plotted against procedure-specific caseload) for MIS and conventional surgery were compared using a linear mixed model. The MIS curve revealed to be steeper than the conventional curve (1.77 vs. 0.75 OSATS points per assessed procedure; 95% CI 1.19-2.35 vs. 0.15-1.35, p < 0.01). Basic MIS procedures do not seem harder to acquire during residency than conventional surgical procedures. This may have resulted from the incorporation of structured MIS training programs in residency. Hopefully, this will lead to a more successful implementation of the advanced MIS procedures. Copyright © 2010 S. Karger AG, Basel.

Does health intervention research have real world policy and practice impacts: testing a new impact assessment tool.

Science.gov (United States)

Cohen, Gillian; Schroeder, Jacqueline; Newson, Robyn; King, Lesley; Rychetnik, Lucie; Milat, Andrew J; Bauman, Adrian E; Redman, Sally; Chapman, Simon

2015-01-01

There is a growing emphasis on the importance of research having demonstrable public benefit. Measurements of the impacts of research are therefore needed. We applied a modified impact assessment process that builds on best practice to 5 years (2003-2007) of intervention research funded by Australia's National Health and Medical Research Council to determine if these studies had post-research real-world policy and practice impacts. We used a mixed method sequential methodology whereby chief investigators of eligible intervention studies who completed two surveys and an interview were included in our final sample (n = 50), on which we conducted post-research impact assessments. Data from the surveys and interviews were triangulated with additional information obtained from documentary analysis to develop comprehensive case studies. These case studies were then summarized and the reported impacts were scored by an expert panel using criteria for four impact dimensions: corroboration; attribution, reach, and importance. Nineteen (38%) of the cases in our final sample were found to have had policy and practice impacts, with an even distribution of high, medium, and low impact scores. While the tool facilitated a rigorous and explicit criterion-based assessment of post-research impacts, it was not always possible to obtain evidence using documentary analysis to corroborate the impacts reported in chief investigator interviews. While policy and practice is ideally informed by reviews of evidence, some intervention research can and does have real world impacts that can be attributed to single studies. We recommend impact assessments apply explicit criteria to consider the corroboration, attribution, reach, and importance of reported impacts on policy and practice. Impact assessments should also allow sufficient time between impact data collection and completion of the original research and include mechanisms to obtain end-user input to corroborate claims and reduce biases

Human scenarios for the screening assessment. Columbia River Comprehensive Impact Assessment

Energy Technology Data Exchange (ETDEWEB)

Napier, B.A.; Harper, B.L.; Lane, N.K.; Strenge, D.L.; Spivey, R.B.

1996-03-01

Because of past nuclear production operations along the Columbia River, there is intense public and tribal interest in assessing any residual Hanford Site related contamination along the river from the Hanford Reach to the Pacific Ocean. The Columbia River Impact Assessment (CRCIA) was proposed to address these concerns. The assessment of the Columbia River is being conducted in phases. The initial phase is a screening assessment of risk, which addresses current environmental conditions for a range of potential uses. One component of the screening assessment estimates the risk from contaminants in the Columbia River to humans. Because humans affected by the Columbia river are involved in a wide range of activities, various scenarios have been developed on which to base the risk assessments. The scenarios illustrate the range of activities possible by members of the public coming in contact with the Columbia River so that the impact of contaminants in the river on human health can be assessed. Each scenario illustrates particular activity patterns by a specific group. Risk will be assessed at the screening level for each scenario. This report defines the scenarios and the exposure factors that will be the basis for estimating the potential range of risk to human health from Hanford-derived radioactive as well as non-radioactive contaminants associated with the Columbia River.

Human scenarios for the screening assessment. Columbia River Comprehensive Impact Assessment

International Nuclear Information System (INIS)

Napier, B.A.; Harper, B.L.; Lane, N.K.; Strenge, D.L.; Spivey, R.B.

1996-03-01

Because of past nuclear production operations along the Columbia River, there is intense public and tribal interest in assessing any residual Hanford Site related contamination along the river from the Hanford Reach to the Pacific Ocean. The Columbia River Impact Assessment (CRCIA) was proposed to address these concerns. The assessment of the Columbia River is being conducted in phases. The initial phase is a screening assessment of risk, which addresses current environmental conditions for a range of potential uses. One component of the screening assessment estimates the risk from contaminants in the Columbia River to humans. Because humans affected by the Columbia river are involved in a wide range of activities, various scenarios have been developed on which to base the risk assessments. The scenarios illustrate the range of activities possible by members of the public coming in contact with the Columbia River so that the impact of contaminants in the river on human health can be assessed. Each scenario illustrates particular activity patterns by a specific group. Risk will be assessed at the screening level for each scenario. This report defines the scenarios and the exposure factors that will be the basis for estimating the potential range of risk to human health from Hanford-derived radioactive as well as non-radioactive contaminants associated with the Columbia River

Value for Money? Problems of Impact Assessment of Counter-radicalization Policies on End Target Groups

DEFF Research Database (Denmark)

Lindekilde, Lasse

2012-01-01

There is a lack of consensus in the academic literature and among policy makers and practitioners on the definition of violent radicalisation, and current counter-radicalisation policy responses and procedures are informed by a weak and, at times, confused understanding of the motivational...... and structural factors underpinning such a process. The result is a variety of interventions across the EU, signalling a lack of consensus on the purposes of counter-radicalisation. In addition, indicators of success of counter-radicalisation policies are often unclear or unspecified. One consequence...... of this is that assessments of the effectiveness of counter-radicalisation measures and policy responses are either lacking or often methodologically questionable, impairing our understanding of the impacts of counter-radicalisation interventions on targeted communities. The article investigates problems of assessing...

Environmental economic impact assessment in China: Problems and prospects

International Nuclear Information System (INIS)

Lindhjem, Henrik; Hu Tao; Ma Zhong; Skjelvik, John Magne; Song Guojun; Vennemo, Haakon; Wu Jian; Zhang Shiqiu

2007-01-01

The use of economic valuation methods to assess environmental impacts of projects and policies has grown considerably in recent years. However, environmental valuation appears to have developed independently of regulations and practice of environmental impact assessment (EIA), despite its potential benefits to the EIA process. Environmental valuation may be useful in judging significance of impacts, determining mitigation level, comparing alternatives and generally enabling a more objective analysis of tradeoffs. In China, laws and regulations require the use of environmental valuation in EIA, but current practice lags far behind. This paper assesses the problems and prospects of introducing environmental valuation into the EIA process in China. We conduct four case studies of environmental economic impact assessment (EEIA), three of which are based on environmental impact statements of construction projects (a power plant, a wastewater treatment plant and a road construction project) and one for a regional pollution problem (wastewater irrigation). The paper demonstrates the potential usefulness of environmental valuation but also discusses several challenges to the introduction and wider use of EEIA, many of which are likely to be of relevance far beyond the Chinese context. The paper closes with suggesting some initial core elements of an EEIA guideline

Roles of social impact assessment practitioners

International Nuclear Information System (INIS)

Wong, Cecilia H.M.; Ho, Wing-chung

2015-01-01

The effectiveness of social impact assessment (SIA) hinges largely on the capabilities and ethics of the practitioners, yet few studies have dedicated to discuss the expectations for these professionals. Recognising this knowledge gap, we employed the systemic review approach to construct a framework of roles of SIA practitioners from literature. Our conceptual framework encompasses eleven roles, namely project manager of SIA, practitioner of SIA methodologies, social researcher, social strategy developer, social impact management consultant, community developer, visionary, public involvement specialist, coordinator, SIA researcher, and educator. Although these roles have been stratified into three overarching categories, the project, community and SIA development, they are indeed interrelated and should be examined together. The significance of this study is threefold. First, it pioneers the study of the roles of SIA practitioners in a focused and systematic manner. Second, it informs practitioners of the expectations of them thereby fostering professionalism. Third, it prepares the public for SIAs by elucidating the functions and values of the assessment. - Highlights: • We adopt systematic review to construct a framework of roles of social impact assessment (SIA) practitioners from literature. • We use three overarching categorises to stratify the eleven roles we proposed. • This work is a novel attempt to study the work as a SIA practitioner and build a foundation for further exploration. • The framework informs practitioners of the expectations on them thus reinforcing professionalism. • The framework also prepares the public for SIAs by elucidating the functions and values of the assessment

Roles of social impact assessment practitioners

Energy Technology Data Exchange (ETDEWEB)

Wong, Cecilia H.M., E-mail: ceciliawonghm@gmail.com; Ho, Wing-chung, E-mail: wingcho@cityu.edu.hk

2015-01-15

The effectiveness of social impact assessment (SIA) hinges largely on the capabilities and ethics of the practitioners, yet few studies have dedicated to discuss the expectations for these professionals. Recognising this knowledge gap, we employed the systemic review approach to construct a framework of roles of SIA practitioners from literature. Our conceptual framework encompasses eleven roles, namely project manager of SIA, practitioner of SIA methodologies, social researcher, social strategy developer, social impact management consultant, community developer, visionary, public involvement specialist, coordinator, SIA researcher, and educator. Although these roles have been stratified into three overarching categories, the project, community and SIA development, they are indeed interrelated and should be examined together. The significance of this study is threefold. First, it pioneers the study of the roles of SIA practitioners in a focused and systematic manner. Second, it informs practitioners of the expectations of them thereby fostering professionalism. Third, it prepares the public for SIAs by elucidating the functions and values of the assessment. - Highlights: • We adopt systematic review to construct a framework of roles of social impact assessment (SIA) practitioners from literature. • We use three overarching categorises to stratify the eleven roles we proposed. • This work is a novel attempt to study the work as a SIA practitioner and build a foundation for further exploration. • The framework informs practitioners of the expectations on them thus reinforcing professionalism. • The framework also prepares the public for SIAs by elucidating the functions and values of the assessment.

Value-impact assessment of safety-related modifications

International Nuclear Information System (INIS)

Knowles, W.M.C.; Dinnie, K.S.; Gordon, C.W.

1992-01-01

Like other nuclear utilities, Ontario Hydro, as part of its risk management activities, continually assesses the safety of its nuclear operations. In addition, new regulatory requirements are being applied to the older nuclear power plants. Both of these result in proposed plant modifications designed to reduce the risk to the public. However, modifications to an operating plant can have serious economic effects, and the resources, both financial and personnel, required for the implementation of these modifications are limited. Thus, all potential benefits and effects of a proposed modification must be thoroughly investigated to judge whether the modification is beneficial. Ontario Hydro has begun to use comprehensive value-impact assessments, utilizing plant-specific probabilistic risk assessments (PRAs), as tools to provide an informed basis for judgments on the benefit of safety-related modifications. The results from value-impact assessments can also be used to prioritize the implementation of these modifications

A new approach for environmental justice impact assessment

International Nuclear Information System (INIS)

Wilkinson, C.H.; Brumburgh, G.P.; Edmunds, T.A.; Kay, D.

1996-03-01

President Clinton's Executive Order 12898 calls for examination of disproportionately high and adverse impacts to minority and low-income communities. In addition to demographic mapping, environmental justice analyses should also include quantitative impact assessment to show presence or absence of disproportionate impacts. This study demonstrates use of a geographic information system (GIS) and a computer model. For this demonstration, a safety analysis report and a computer code were used to develop impact assessment data from a hypothetical facility accident producing a radiological airborne plume. The computer code modeled the plume, plotted dose contours, and provided latitude and longitude coordinates for transfer to the GIS. The GIS integrated and mapped the impact and demographic data toprovide a graphical representation of the plume with respect to the population. Impacts were then analyzed. The GIS was used to estimate the total dose to the exposed population under the plume, the dose to the low-income population under the plume, and the dose to the minority population under the plume. Impacts among the population groups were compared to determine whether a dispropotionate share of the impacts were borne by minority or low-income populations

The Implicit Relational Assessment Procedure (IRAP) as a Measure of Spider Fear

Science.gov (United States)

Nicholson, Emma; Barnes-Holmes, Dermot

2012-01-01

A greater understanding of implicit cognition can provide important information regarding the etiology and maintenance of psychological disorders. The current study sought to determine the utility of the Implicit Relational Assessment Procedure (IRAP) as a measure of implicit aversive bias toward spiders in two groups of known variation, high fear…

Responsible research and innovation indicators for science education assessment: how to measure the impact?

Science.gov (United States)

Heras, Maria; Ruiz-Mallén, Isabel

2017-12-01

The emerging paradigm of responsible research and innovation (RRI) in the European Commission policy discourse identifies science education as a key agenda for better equipping students with skills and knowledge to tackle complex societal challenges and foster active citizenship in democratic societies. The operationalisation of this broad approach in science education demands, however, the identification of assessment frameworks able to grasp the complexity of RRI process requirements and learning outcomes within science education practice. This article aims to shed light over the application of the RRI approach in science education by proposing a RRI-based analytical framework for science education assessment. We use such framework to review a sample of empirical studies of science education assessments and critically analyse it under the lenses of RRI criteria. As a result, we identify a set of 86 key RRI assessment indicators in science education related to RRI values, transversal competences and experiential and cognitive aspects of learning. We argue that looking at science education through the lenses of RRI can potentially contribute to the integration of metacognitive skills, emotional aspects and procedural dimensions within impact assessments so as to address the complexity of learning.

Determining the suitability of materials for disposal at sea under the London Convention 1972: A radiological assessment procedure

International Nuclear Information System (INIS)

2003-10-01

on conducting specific assessments to determine whether candidate materials for disposal at sea contained de minimis levels of radioactivity. This report contains guidance on performing specific assessments of candidate materials to determine whether the materials are de minimis in the meaning of the London Convention 1972. It follows the guidelines adopted by the Twenty-first Consultative Meeting of the London Convention 1972 that incorporate a Stepwise Evaluation Procedure for screening candidate material to determine if it can be treated as 'non-radioactive' (i.e. de minimis) under the Convention. Material that cannot be readily defined as de minimis on the basis of Steps 1 to 5 of the Stepwise Evaluation Procedure require a specific assessment at Step 6. Such an assessment is the subject of this report. The assessment process described in this report is based on an inherently conservative procedure consistent with the precautionary approach, provided for under the London Convention 1972. Its purpose is to ensure the use of conservative models and cautious assumptions that result in the overestimation of the doses due to candidate materials that might be disposed of at sea in near coastal waters under de minimis provisions. Accordingly, the radiological consequences of disposal at sea of de minimis materials in other areas of the continental shelf and deeper waters will result in much lower radiation exposures than those considered here. It must be stressed that any candidate materials designated as de minimis must comply with all other provisions of the Convention. Section 2 provides a summary of the Stepwise Evaluation Procedure as detailed in the guidelines and background information necessary to understand the context of this guidance. Section 3 describes in detail a procedure to conduct the specific radiological assessment of the disposal of a candidate material. It contains a schematic diagram illustrating the specific assessment process and components of

Environmental impact assessments of wind energy projects: An Alberta example