WorldWideScience

Sample records for impact assessment lcia

  1. Life cycle impact assessment (LCIA) using the ecological scarcity ...

    African Journals Online (AJOL)

    After it is done, the inventory will be interpreted to the environmental impacts in life cycle impact assessment (LCIA). Two LCIA methods identified were “midpoint and endpoint” approaches. The ecological scarcity (ecopoints) is an LCIA method using “midpoint” approach. From the analysis to both life cycle stages, analysis ...

  2. Impacts of “metals” on human health: uncertainties in using different Life Cycle Impact Assessment (LCIA) methodologies

    DEFF Research Database (Denmark)

    Pizzol, Massimo; Christensen, Per; Schmidt, Jannick Højrup

    This study looks into the uncertainties in determining the impact of “metals” emissions to human health, in Life Cycle Impact Assessment (LCIA). Metals are diverse substances, with different proprieties and characteristics, considered important in LCIA because of their toxicity to humans or ecosy......This study looks into the uncertainties in determining the impact of “metals” emissions to human health, in Life Cycle Impact Assessment (LCIA). Metals are diverse substances, with different proprieties and characteristics, considered important in LCIA because of their toxicity to humans...... be considered in an impact assessment focused on human health, and defined a list of 14 metals. We performed a contribution analysis in order to compare methods in relative terms; an approach successfully used in other studies. Various processes have been analyzed with 8 different LCIA methods in order...... to assess both how much each metal contributes to the total impact on human health, when only metal emissions are present, and how much metals in total contribute when also other toxic substances are included in the inventory of emissions. Differences between the methods are great and due...

  3. Review on Suitability of Available LCIA Methodologies for Assessing Environmental Impact of the Food Sector

    Directory of Open Access Journals (Sweden)

    Pegah Amani

    2011-12-01

    Full Text Available Production, processing, distribution, and consumption of a wide variety of products in the food sector have different ranges of environmental impacts. Methodologies used in environmental impact assessment differ in which set of impact categories is covered and which models are used to assess them. In the food sector, life cycle assessment results are mostly presented without any clear distinction of the principles applied to selecting the relevant methodology. In this paper, the most relevant life cycle impact assessment methodologies are determined from the list of recommended methodologies published recently in the international reference life cycle data system (ILCD handbook. The range of the relevant impacts covered is considered as the main indicator decisive in selecting a methodology. The selection of the relevant set of impact categories is performed through an overview of more than 50 recent LCA case studies of different products in the sector. The result of the research is a short list of three LCIA methodologies recommended to be used for environmental impact assessment of products in the food sector.

  4. A marine eutrophication impacts assessment method in LCIA coupling coastal ecosystems exposure to nitrogen and species sensitivity to hypoxia

    DEFF Research Database (Denmark)

    Cosme, Nuno Miguel Dias; Koski, Marja; Hauschild, Michael Zwicky

    Characterisation modelling in Life Cycle Impact Assessment (LCIA) aims at quantifying potential impacts of anthropogenic emissions. It delivers substance-specific Characterisation Factors (CF) expressing ecosystem responses to marginal increments in emitted quantities. Nitrogen (N) emissions from e.......g. agriculture and industry enrich coastal marine ecosystems. Excessive algal growth and dissolved oxygen (DO) depletion typify the resulting marine eutrophication. LCIA modelling frameworks typically encompass fate, exposure and effect in the environment. The present novel method couples relevant marine...... biological processes of ecosystem’s N exposure (Exposure Factor, XF) with the sensitivity of select species to hypoxia (Effect Factor, EF). The XF converts N-inputs into a sinking carbon flux from planktonic primary production and DO consumed by bacterial respiration in bottom waters, whereas EF builds...

  5. LCIA selection methods for assessing toxic releases

    DEFF Research Database (Denmark)

    Larsen, Henrik Fred; Birkved, Morten; Hauschild, Michael Zwicky

    2002-01-01

    the inventory that contribute significantly to the impact categories on ecotoxicity and human toxicity to focus the characterisation work. The reason why the selection methods are more important for the chemical-related impact categories than for other impact categories is the extremely high number......Characterization of toxic emissions in life cycle impact assessment (LCIA) is in many cases severely limited by the lack of characterization factors for the emissions mapped in the inventory. The number of substances assigned characterization factors for (eco)toxicity included in the dominating LCA....... The methods are evaluated against a set of pre-defined criteria (comprising consistency with characterization and data requirement) and applied to case studies and a test set of chemicals. The reported work is part of the EU-project OMNIITOX....

  6. Life cycle impact assessment (LCIA) of paper making process in Iran

    African Journals Online (AJOL)

    Administrator

    2011-06-06

    Jun 6, 2011 ... advantage of reducing deforestation (Ekvall, 1999). Due to the fact that ... LCA is the assessment of the environmental impacts of a given product or process ..... energy: Replacing mazut with nuclear energy, hydro- electricity or ...

  7. Ecosystem quality in LCIA

    DEFF Research Database (Denmark)

    Woods, John S.; Damiani, Mattia; Fantke, Peter

    2017-01-01

    Purpose: Life cycle impact assessment (LCIA) results are used to assess potential environmental impacts of different products and services. As part of the UNEP-SETAC life cycle initiative flagship project that aims to harmonize indicators of potential environmental impacts, we provide a consensus...... viewpoint and recommendations for future developments in LCIA related to the ecosystem quality area of protection (AoP). Through our recommendations, we aim to encourage LCIA developments that improve the usefulness and global acceptability of LCIA results. Methods: We analyze current ecosystem quality...... metrics and provide recommendations to the LCIA research community for achieving further developments towards comparable and more ecologically relevant metrics addressing ecosystem quality. Results and discussion: We recommend that LCIA development for ecosystem quality should tend towards species...

  8. Life cycle impact assessment (LCIA) of paper making process in Iran ...

    African Journals Online (AJOL)

    Ten impact categories were identified as follow: Abiotic depletion, acidification, eutrophication, global warming, ozone layer depletion, human toxicity, fresh water aquatic ecotoxicity, marine aquatic ecotoxicity, terrestrial ecotoxicity and photochemical oxidation. From the results, using bagasse and electricity contributed the ...

  9. New methodology in life cycle impact assessment (LCIA) of waste water treatment

    DEFF Research Database (Denmark)

    Larsen, Henrik Fred; Wenzel, Henrik; Hauschild, Michael Zwicky

    chose among different waste water treatments? Which ones are most beneficial in a holistic perspective? Here, the life cycle assessment (LCA) approach as a decision supporting tool may help because its goal is to allow quantification and direct comparison of characteristics as diverse as energy...

  10. Global Guidance On LCIA Indicators: Impacts Of Particulate Matter And Of Land Use

    DEFF Research Database (Denmark)

    Jolliet, Olivier; Fantke, Peter; McKone, Thomas E.

    2017-01-01

    Improving life cycle impact assessment models is crucial. The flagship project of the UNEP-SETAC Life Cycle Initiative provides global guidance and consensus on environmental LCIA indicators for climate change, particulate matter impacts, land use impact on biodiversity, water scarcity and water ...

  11. Inventory of LCIA selection methods for assessing toxic releases. Methods and typology report part B

    DEFF Research Database (Denmark)

    Larsen, Henrik Fred; Birkved, Morten; Hauschild, Michael Zwicky

    method(s) in Work package 8 (WP8) of the OMNIITOX project. The selection methods and the other CRS methods are described in detail, a set of evaluation criteria are developed and the methods are evaluated against these criteria. This report (Deliverable 11B (D11B)) gives the results from task 7.1d, 7.1e......This report describes an inventory of Life Cycle Impact Assessment (LCIA) selection methods for assessing toxic releases. It consists of an inventory of current selection methods and other Chemical Ranking and Scoring (CRS) methods assessed to be relevant for the development of (a) new selection...... and 7.1f of WP 7 for selection methods. The other part of D11 (D11A) is reported in another report and deals with characterisation methods. A selection method is a method for prioritising chemical emissions to be included in an LCIA characterisation of toxic releases, i.e. calculating indicator scores...

  12. Evaluation of Abiotic Resource LCIA Methods

    Directory of Open Access Journals (Sweden)

    Rodrigo A. F. Alvarenga

    2016-02-01

    Full Text Available In a life cycle assessment (LCA, the impacts on resources are evaluated at the area of protection (AoP with the same name, through life cycle impact assessment (LCIA methods. There are different LCIA methods available in literature that assesses abiotic resources, and the goal of this study was to propose recommendations for that impact category. We evaluated 19 different LCIA methods, through two criteria (scientific robustness and scope, divided into three assessment levels, i.e., resource accounting methods (RAM, midpoint, and endpoint. In order to support the assessment, we applied some LCIA methods to a case study of ethylene production. For RAM, the most suitable LCIA method was CEENE (Cumulative Exergy Extraction from the Natural Environment (but SED (Solar Energy Demand and ICEC (Industrial Cumulative Exergy Consumption/ECEC (Ecological Cumulative Exergy Consumption may also be recommended, while the midpoint level was ADP (Abiotic Depletion Potential, and the endpoint level was both the Recipe Endpoint and EPS2000 (Environmental Priority Strategies. We could notice that the assessment for the AoP Resources is not yet well established in the LCA community, since new LCIA methods (with different approaches and assessment frameworks are showing up, and this trend may continue in the future.

  13. Eco-toxicological impact of “metals” on the aquatic and terrestrial ecosystem: A comparison between eight different methodologies for Life Cycle Impact Assessment (LCIA)

    DEFF Research Database (Denmark)

    Pizzol, Massimo; Christensen, Per; Schmidt, Jannick Andresen

    2011-01-01

    the presence of high uncertainties in the process, in particular when the analysis focuses on metals emissions. Metals are diverse inorganic substances relevant for their characteristic environmental chemistry, their high persistency into the environment and their toxicity at even low environmental...... a contribution analysis at two levels: general and specific. Results show that there is poor agreement between methods in the determination of the total eco-toxic impact attributable to metals, and in defining which metal provokes the highest eco-toxic impact per unitary emission. Furthermore......, the characterization phase is critical in determining the disagreement between methods. However, some similarities were found: there is the tendency in most methods to associate the largest share of the total eco-toxicological impacts to metals. Theoretical and practical differences between methods are discussed...

  14. Life Cycle Impact Assessment

    DEFF Research Database (Denmark)

    Rosenbaum, Ralph K.; Hauschild, Michael Zwicky; Boulay, Anne-Marie

    2018-01-01

    This chapter is dedicated to the third phase of an LCA study, the Life Cycle Impact Assessment (LCIA) where the life cycle inventory’s information on elementary flows is translated into environmental impact scores. In contrast to the three other LCA phases, LCIA is in practice largely automated...

  15. Why Include Impacts on Biodiversity from Land Use in LCIA and How to Select Useful Indicators?

    Directory of Open Access Journals (Sweden)

    Ottar Michelsen

    2015-05-01

    Full Text Available Loss of biodiversity is one of the most severe threats to sustainability, and land use and land use changes are still the single most important factor. Still, there is no sign of any consensus on how to include impacts on biodiversity from land use and land use changes in LCIA. In this paper, different characteristics of biodiversity are discussed and related to proposals on how to include land use and land use changes in LCIA. We identify the question of why we should care about biodiversity as a key question, since different motivations will result in different choices for the indicators, and we call for more openness in the motivation for indicator selection. We find a promising trend in combining pressure indicators with geographic weighting and regard this as a promising way ahead. More knowledge on the consequences of different choices, such as the selection of a reference state, is still needed.

  16. Contribution of waterborne nitrogen emissions to hypoxia-driven marine eutrophication: modelling of damage to ecosystems in life cycle impact assessment (LCIA)

    DEFF Research Database (Denmark)

    Cosme, Nuno Miguel Dias

    Marine eutrophication refers to the ecosystem response to the loading of a growth limiting nutrient, typically nitrogen (N), to coastal waters, where it may cause several impacts. One of the possible impact pathways to these impacts involves the excessive depletion of dissolved oxygen hypoxia) in...... and atmospheric deposition as a consequence of fossil fuels combustion.......Marine eutrophication refers to the ecosystem response to the loading of a growth limiting nutrient, typically nitrogen (N), to coastal waters, where it may cause several impacts. One of the possible impact pathways to these impacts involves the excessive depletion of dissolved oxygen hypoxia......) in bottom waters. Hypoxia is identified as an important and widespread cause of disturbance to marine ecosystems and has been linked to the increasing anthropogenic pressure. This is driven by environmental emissions of reactive nitrogen, mainly from N-containing fertilizers used in agriculture...

  17. The development of an operational LCIA-methodology with impact categories based on the control variables in the Planetary Boundaries framework

    DEFF Research Database (Denmark)

    Ryberg, Morten; Owsianiak, Mikolaj; Hauschild, Michael Zwicky

    2016-01-01

    This study presents a first attempt at an operational LCIA-methodology basing the definition of the impact categories on the control variables as defined in the Planetary Boundaries (PB) framework. The PB-framework introduced a set of biophysical Earth system processes and defined quantitative PBs...... that have to be respected for Earth to remain in the Holocene state. The concept is attracting a strong interest from in dustry as companies seek to assess and communicate the environmental performance of their products relative to the PBs. The PB -framework has previously been attempted included in LCA...... variables in the PB-framework and current LCIA impact categories. The new insights can be used for communicating the product’s environmental performance and to support definitions of absolute reduction targets relative to the PBs....

  18. Comparison between three different LCIA methods for aquatic ecotoxicity and a product Environmental Risk Assessment – Insights from a Detergent Case Study within OMNIITOX

    DEFF Research Database (Denmark)

    Pant, Rana; Van Hoof, Geert; Feijtel, Tom

    2004-01-01

    set of physico-chemical and toxicological effect data to enable a better comparison of the methodological differences. For the same reason, the system boundaries were kept the same in all cases, focusing on emissions into water at the disposal stage. Results and Discussion. Significant differences...... ecotoxicity is not satisfactory, unless explicit reasons for the differences are identifiable. This can hamper practical decision support, as LCA practitioners usually will not be in a position to choose the 'right' LCIA method for their specific case. This puts a challenge to the entire OMNIITOX project......) with results from an Environmental Risk Assessment (ERA). Material and Methods. The LCIA has been conducted with EDIP97 (chronic aquatic ecotoxicity) [1], USES-LCA (freshwater and marine water aquatic ecotoxicity, sometimes referred to as CML2001) [2, 3] and IMPACT 2002 (covering freshwater aquatic ecotoxicity...

  19. Accounting for the dissociating properties of organic chemicals in LCIA: An uncertainty analysis applied to micropollutants in the assessment of freshwater ecotoxicity

    International Nuclear Information System (INIS)

    Morais, Sérgio Alberto; Delerue-Matos, Cristina; Gabarrell, Xavier

    2013-01-01

    Highlights: ► Fate parameters of dissociating chemicals were estimated and applied to an LCIA model. ► Results were compared to the default model using non-polar partitioning regressions. ► Negligible differences were estimated for direct emissions to freshwater. ► Results were overestimated in the default model for indirect emissions. ► Sorption of the cationic fraction of organic bases was the most influential parameter. -- Abstract: In life cycle impact assessment (LCIA) models, the sorption of the ionic fraction of dissociating organic chemicals is not adequately modeled because conventional non-polar partitioning models are applied. Therefore, high uncertainties are expected when modeling the mobility, as well as the bioavailability for uptake by exposed biota and degradation, of dissociating organic chemicals. Alternative regressions that account for the ionized fraction of a molecule to estimate fate parameters were applied to the USEtox model. The most sensitive model parameters in the estimation of ecotoxicological characterization factors (CFs) of micropollutants were evaluated by Monte Carlo analysis in both the default USEtox model and the alternative approach. Negligible differences of CFs values and 95% confidence limits between the two approaches were estimated for direct emissions to the freshwater compartment; however the default USEtox model overestimates CFs and the 95% confidence limits of basic compounds up to three orders and four orders of magnitude, respectively, relatively to the alternative approach for emissions to the agricultural soil compartment. For three emission scenarios, LCIA results show that the default USEtox model overestimates freshwater ecotoxicity impacts for the emission scenarios to agricultural soil by one order of magnitude, and larger confidence limits were estimated, relatively to the alternative approach

  20. A teaching and communication tool based on DPSIR and LCIA indicator for marine eutrophication

    DEFF Research Database (Denmark)

    Cosme, Nuno Miguel Dias; Olsen, Stig Irving

    The Drivers-Pressures-State-Impacts-Responses (DPSIR) is an adaptive environmental management approach that integrates environmental, social, and economic aspects into a common framework. Life Cycle Impact Assessment (LCIA) indicators aim at modelling the P-S-I components and provide background...... to understand D-R. The DPSIR approach was applied to the LCIA indicator for marine eutrophication to communicate sustainability assessment to graduate students. Broadly, this science-based educational example is useful to predict impacts, communicate knowledge, and support decisions. It assesses the high demand......, reduce P, and restore S. LCIA indicators also support a precautionary approach acting earlier on D-P and promoting sustainability. LCIA-based DPSIR seems a useful tool for sustainability teaching and communication purposes, bridging science and management while promoting a good conceptual understanding...

  1. Representativeness of environmental impact assessment methods regarding Life Cycle Inventories.

    Science.gov (United States)

    Esnouf, Antoine; Latrille, Éric; Steyer, Jean-Philippe; Helias, Arnaud

    2018-04-15

    Life Cycle Assessment (LCA) characterises all the exchanges between human driven activities and the environment, thus representing a powerful approach for tackling the environmental impact of a production system. However, LCA practitioners must still choose the appropriate Life Cycle Impact Assessment (LCIA) method to use and are expected to justify this choice: impacts should be relevant facing the concerns of the study and misrepresentations should be avoided. This work aids practitioners in evaluating the adequacy between the assessed environmental issues and studied production system. Based on a geometrical standpoint of LCA framework, Life Cycle Inventories (LCIs) and LCIA methods were localized in the vector space spanned by elementary flows. A proximity measurement, the Representativeness Index (RI), is proposed to explore the relationship between those datasets (LCIs and LCIA methods) through an angular distance. RIs highlight LCIA methods that measure issues for which the LCI can be particularly harmful. A high RI indicates a close proximity between a LCI and a LCIA method, and highlights a better representation of the elementary flows by the LCIA method. To illustrate the benefits of the proposed approach, representativeness of LCIA methods regarding four electricity mix production LCIs from the ecoinvent database are presented. RIs for 18 LCIA methods (accounting for a total of 232 impact categories) were calculated on these LCIs and the relevance of the methods are discussed. RIs prove to be a criterion for distinguishing the different LCIA methods and could thus be employed by practitioners for deeper interpretations of LCIA results. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Introducing Life Cycle Impact Assessment

    DEFF Research Database (Denmark)

    Hauschild, Michael Zwicky; Huijbregts, Mark AJ

    2015-01-01

    This chapter serves as an introduction to the presentation of the many aspects of life cycle impact assessment (LCIA) in this volume of the book series ‘LCA Compendium’. It starts with a brief historical overview of the development of life cycle impact assessment driven by numerous national LCIA...... methodology projects and presents the international scientific discussions and methodological consensus attempts in consecutive working groups under the auspices of the Society of Environmental Toxicology and Chemistry (SETAC) as well as the UNEP/ SETAC Life Cycle Initiative, and the (almost) parallel...

  3. DEVELOPMENT OF THE METHOD AND U.S. NORMALIZATION DATABASE FOR LIFE CYCLE IMPACT ASSESSMENT AND SUSTAINABILITY METRICS

    Science.gov (United States)

    Normalization is an optional step within Life Cycle Impact Assessment (LCIA) that may be used to assist in the interpretation of life cycle inventory data as well as, life cycle impact assessment results. Normalization transforms the magnitude of LCI and LCIA results into relati...

  4. The LCIA midpoint-damage framework of the UNEP/SETAC life cycle initiative

    NARCIS (Netherlands)

    Jolliet, O; Muller-Wenk, R; Bare, J; Brent, A; Goedkoop, M; Heijungs, R; Itsubo, N; Pena, C; Pennington, D; Potting, J; Rebitzer, G; Stewart, M; de Haes, HU; Weidema, B

    2004-01-01

    Background, Aims and Scope. Life Cycle Impact Assessment (LCIA) methods can be grouped into two families: classical methods determining impact category indicators at an intermediate position of the impact pathways (e.g. ozone depletion potentials) and damage-oriented methods aiming at more easily

  5. The LCIA midpoint-damage framework of the UNEP/SETAC life cycle initiative

    NARCIS (Netherlands)

    Jolliet, Olivier; Müller-Wenk, Ruedi; Bare, Jane; Brent, Alan; Goedkoop, Mark; Heijungs, Reinout; Itsubo, Norihiro; Peña, Claudia; Pennington, David; Potting, José; Rebitzer, Gerald; Stewart, Mary; De Haes, Helias A Udo; Weidema, Bo

    2004-01-01

    Background, Aims and Scope. Life Cycle Impact Assessment (LCIA) methods can be grouped into two families: classical methods determining impact category indicators at an intermediate position of the impact pathways (e.g. ozone depletion potentials) and damag e-oriented methods aiming at more easily

  6. Life Cycle Impact Assessment Research Developments and Needs

    Science.gov (United States)

    Life Cycle Impact Assessment (LCIA) developments are explained along with key publications which record discussions which comprised ISO 14042 and SETAC document development, UNEP SETAC Life Cycle Initiative research, and research from public and private research institutions. It ...

  7. Global guidance on environmental life cycle impact assessment indicators: Progress and case study

    DEFF Research Database (Denmark)

    Frischknecht, Rolf; Fantke, Peter; Tschümperlin, Laura

    2016-01-01

    Purpose The life cycle impact assessment (LCIA) guidance flagship project of the United Nations Environment Programme (UNEP)/Society of Environmental Toxicology and Chemistry (SETAC) Life Cycle Initiative aims at providing global guidance and building scientific consensus on environmental LCIA in...

  8. Life cycle impact assessment (LCIA) using the ecological scarcity ...

    African Journals Online (AJOL)

    Mr.Amir Hamzah Sharaai

    2012-01-19

    Jan 19, 2012 ... ISSN 1684–5315 © 2012 Academic Journals. Full Length .... between each steel rods are different based on the types of fabric. Reinforcement steel ... software. Foreground data collected from the treatment plant are shown in ...

  9. Review on methodology for LCIA of marine eutrophication

    DEFF Research Database (Denmark)

    Larsen, Henrik Fred

    As part of the ongoing EU FP7 project LC-Impact (www.lc-impact.eu) new life cycle impact assessment (LCIA) methods are going to be developed and tested on industry cases. Among the life cycle assessment (LCA) impact categories in focus are aquatic eutrophication. As related to especially the marine...... concentration and the potentially affected fraction of species in the marine ecosystem. This poster will present a review of the very limited existing attempts on how to include marine eutrophication in LCA and discuss alternative methodologies on how to model the environmental mechanism of this impact category....

  10. LCIA framework and cross-cutting issues guidance within the UNEP/SETAC Life Cycle Initiative

    Science.gov (United States)

    Increasing needs for decision support and advances in scientific knowledge within life cycle assessment (LCA) led to substantial efforts to provide global guidance on environmental life cycle impact assessment (LCIA) indicators under the auspices of the UNEP-SETAC Life Cycle Init...

  11. LCIA framework and cross-cutting issues guidance within the UNEP-SETAC Life Cycle Initiative

    DEFF Research Database (Denmark)

    Verones, Francesca; Bare, Jane; Bulle, Cécile

    2017-01-01

    of these efforts, a dedicated task force focused on addressing several LCIA cross-cutting issues as aspects spanning several impact categories, including spatiotemporal aspects, reference states, normalization and weighting, and uncertainty assessment. Here, findings of the cross-cutting issues task force...... are presented along with an update of the existing UNEP-SETAC LCIA emission-to-damage framework. Specific recommendations are provided with respect to metrics for human health (Disability Adjusted Life Years, DALY) and ecosystem quality (Potentially Disappeared Fraction of species, PDF). Additionally, we stress...

  12. Identification of Significant Impact of Silicon Foundry Sands Mining on LCIA

    Directory of Open Access Journals (Sweden)

    Jozef Mitterpach

    2015-12-01

    Full Text Available This paper presents a case study based on a LCA (Life Cycle Assessment research program of the silicon foundry sand (SFS due to the large quantity of produced waste foundry sand (WFS. The foundry waste is a high priority sector within the growing European foundry industry. It is necessary to understand the full life cycle of the foundry waste in order to correctly identify magnitude and types of impacts it has on the environment. System boundary includes the processes: mining, modification, packing, storage and transport to foundry. Inventory analysis data were analyzed and finally converted to the functional unit, which has been defined as one ton of SFS. The resulting environmental impact of SFS production in endpoint is: consumption of natural resources 70.9%, ecosystem quality 18.2% and human health 10.9%. The following portions, with respective percentages, have the greatest overall effect on these results: diesel fuel consumption 32.4% and natural gas consumption 28.7%, electricity usage 17.2%, transport 12.2%, devastation caused by the SFS 5.35% and oil (engine, gear and hydraulic consumption 4.14%. The highest contributor to the diesel fuel consumption is the SFS exploitation. The overall effect of desiccation was 35.8% and was caused by high consumption of resources and electricity.

  13. Terrestrial and aquatic ecotoxicity assessment of Cr(VI) by the ReCiPe method calculation (LCIA): application on an old industrial contaminated site.

    Science.gov (United States)

    Adam, Véronique; Quaranta, Gaétana; Loyaux-Lawniczak, Stéphanie

    2013-05-01

    The most stable forms of chromium in the environment are chromium (III) and chromium (VI), the former being relatively immobile and necessary for organisms, and the latter being highly soluble and toxic. It is thus important to characterise ecotoxicological impacts of Cr(VI). However, there are still some important uncertainties in the calculation of ecotoxicological impacts of heavy metals in the LCIA global approach. The aim of this paper is to understand how the spatial and dynamic characterization of life cycle inventory (LCI) data can be exploited in life cycle impact assessment and particularly for the evaluation of the aquatic and terrestrial ecotoxicity of Cr(VI). To quantify these impacts, we studied an industrial waste landfill in the North of France that was contaminated with chromium. On the polluted area, the aquatic contamination is due to the slag heap as well as to chromium spots in soil. The soil contamination is mainly due to infiltration of chromium from the infill. The concentration of Cr(VI) in soil and water varies according to seasonal climatic variations and groundwater level. These variations have an effect on the Cr(VI) fate factor, in particular on transfer and residence time of the substance. This study underlines the spatial distribution of aquatic ecotoxicity and the temporal variation of freshwater ecotoxicity. We analysed the correlation between precipitation, temperature, concentration and ecotoxicity impact. With regards to the terrestrial ecotoxicity, the study focused on the vertical variation of the ecotoxicity and the major role of the soil layer composition into terrestrial pollution.

  14. Evaluation of Ecotoxicity Effect Indicators for Use in LCIA

    DEFF Research Database (Denmark)

    Larsen, Henrik Fred; Hauschild, Michael Zwicky

    2007-01-01

    a low data demand and uses only the lowest data (e.g. lowest NOEC value). Because it is developed in tiered risk assessment, and hence makes use of conservative assessment factors, it is not optimal, in its present form, to use in the comparative framework of LCIA, where best estimates are sought......, reproducibility, data demand, data availability, quantification of uncertainty, transparency and spatial differentiation. Results and Discussion. The results of the evaluation of the two impact approaches (i.e. PNEC and PAF) show both pros and cons for each of them. The assessment factor-based PNEC approach has...

  15. Spatially-explicit LCIA model for marine eutrophication as a tool for sustainability assessment

    DEFF Research Database (Denmark)

    Cosme, Nuno Miguel Dias; Hauschild, Michael Zwicky

    2014-01-01

    The increasing emissions from human activities are overrunning the ecosystems’ natural capacity to absorb them. Nutrient emissions, mostly nitrogen- and phosphorus-forms (N, P) from e.g. agricultural runoff and combustion processes, may lead to social-economic impacts and environmental quality......-enrichment to impacts on marine ecosystems. Emitted nitrogen reaches marine coastal waters where it promotes the growth of phytoplankton biomass in the surface photic zone from where it eventually sinks to bottom waters. This downward flux of organic matter is respired there by bacteria resulting in the consumption...... of dissolved oxygen. An excessive depletion of oxygen affects the exposed organisms and loss of species diversity may be expected. A model framework was built to estimate the potential impacts arising from N-emissions (see figure). It combines the fate of N in rivers and coastal waters, the exposure...

  16. The DPSIR approach applied to marine eutrophication in LCIA as a learning tool

    DEFF Research Database (Denmark)

    Cosme, Nuno Miguel Dias; Olsen, Stig Irving

    assessment and response design ultimately benefit from spatial differentiation in the results. DPSIR based on LCIA seems a useful tool to improve communication and learning, as it bridges science and management while promoting the basic elements of sustainable development in a practical educational...... eutrophication. The goal is to promote an educational example of environmental impacts assessment through science-based tools to predict the impacts, communicate knowledge and support decisions. The example builds on the (D) high demand for fixation of reactive nitrogen that supports several socio......: environmentally sustainable, technologically feasible, economically viable, socially desirable, legally permissible, and administratively achievable. Specific LCIA indicators may provide preliminary information to support a precautionary approach to act earlier on D-P and contribute to sustainability. Impacts...

  17. Holistic impact assessment and cost savings of rainwater harvesting at the watershed scale

    Science.gov (United States)

    We evaluated the impacts of domestic and agricultural rainwater harvesting (RWH) systems in three watersheds within the Albemarle-Pamlico river basin (southeastern U.S.) using life cycle assessment (LCA) and life cycle cost assessment. Life cycle impact assessment (LCIA) categori...

  18. Identifying best existing practice for characterization modeling in life cycle impact assessment

    DEFF Research Database (Denmark)

    Hauschild, Michael Zwicky; Goedkoop, Mark; Guinée, Jeroen

    2013-01-01

    Purpose: Life cycle impact assessment (LCIA) is a field of active development. The last decade has seen prolific publication of new impact assessment methods covering many different impact categories and providing characterization factors that often deviate from each other for the same substance...... and impact. The LCA standard ISO 14044 is rather general and unspecific in its requirements and offers little help to the LCA practitioner who needs to make a choice. With the aim to identify the best among existing characterization models and provide recommendations to the LCA practitioner, a study...... was performed for the Joint Research Centre of the European Commission (JRC). Methods Existing LCIA methods were collected and their individual characterization models identified at both midpoint and endpoint levels and supplemented with other environmental models of potential use for LCIA. No new developments...

  19. Comparative analysis of the life cycle impact assessment of available cement inventories in the EU

    International Nuclear Information System (INIS)

    Josa, Alejandro; Aguado, Antonio; Cardim, Arnaldo; Byars, Ewan

    2007-01-01

    Life cycle impact assessment (LCIA) is one of basic steps in life cycle assessment methodology (LCA). This paper presents a comparative study of the LCIA of different life cycle inventories (LCI) for EU cements. The analysis unit used is the manufacture of 1 kg of cement, from 'cradle to gate'. The impact categories considered are those resulting from the manufacture of cement and include greenhouse effects, acidification, eutrophication and summer and winter smog, amongst others. The results of the study highlighted some inconsistencies in existing inventories. As for the LCIA, the main environmental interventions related to cement manufacture were classified and characterised and their effect on different impact categories analysed. Differences observed in evaluation of the impact of cement type were essentially related to their clinker content

  20. Life cycle impacts of manufacturing redwood decking in Northern California

    Science.gov (United States)

    Richard D. Bergman; Elaine Oneil; Ivan L. Eastin; Han-Sup Han

    2014-01-01

    Awareness of the environmental footprint of building construction and use has led to increasing interest in green building. Defining a green building is an evolving process with life cycle inventory and life cycle impact assessment (LCIA) emerging as key tools in that evolution and definition process. This study used LCIA to determine the environmental footprint...

  1. Accounting of media conditions in the Life Cycle Impact Assessment of Metals on Aquatic Ecosystems

    DEFF Research Database (Denmark)

    Birkved, Morten; Payet, Jerome

    2003-01-01

    Impact from metals play a major role in all Life Cycle Impact Assessment (LCIA) studies. Nevertheless, LCIA methods are typically not adapted for such compounds ignoring problems of speciation and bioavailability. Current uncertainty on metal toxicity estimates are on average twice as high...... of the influence of media condition on the toxicity : Partial Least Square projection to latent Structure Regression (PLSR) was carried out to estimate the relative variable importance and linear regression was used to, identify the relation between media parameters the response of Daphnia magna....

  2. Feasibility of applying site-dependent impact assessment of acidification in LCA

    NARCIS (Netherlands)

    Bellekom, A.A.; Potting, J; Benders, R.M.J.

    2006-01-01

    Goal, Scope and Background. Taking into account the location of emissions and its subsequent, site-dependent impacts improves the accuracy of LCIA. Opponents of site-dependent impact assessment argue that it is too time-consuming to collect the required additional inventory data. In this paper we

  3. Including social impacts in LCIA

    DEFF Research Database (Denmark)

    Dreyer, Louise Camilla; Hauschild, Michael Zwicky; Schierbeck, Jens

    2004-01-01

    Sustainability management in industries is often defined by measuring the performance against the trippel bottom-line, People, Planet and Profit in business decisions. The product chain perspective inherent in LCA is very suitable for sustainability management but LCA methodology only considers...... activities in the product life cycle. Workersø fundamental rights, as defined by the ILO, are used as baseline in the method, and as a consequence, some of the issues addressed by the method are: child labour, discrimination, right to organise, and forced labour....

  4. Understanding Life Cycle Assessment: Applications for OSWER's Land and Materials Managment

    Science.gov (United States)

    The Office of Superfund Remediation and Technology Innovation (OSRTI) is hosting an informative webcast presentation by Jane Bare, expert on Life Cycle Impact Assessment (LCIA) in EPA's Office of Research and Development. Ms. Bare's presentation will provide an overview of LCIA, ...

  5. Assessing the environmental impacts of freshwater consumption in LCA.

    Science.gov (United States)

    Pfister, Stephan; Koehler, Annette; Hellweg, Stefanie

    2009-06-01

    A method for assessing the environmental impacts of freshwater consumption was developed. This method considers damages to three areas of protection: human health, ecosystem quality, and resources. The method can be used within most existing life-cycle impact assessment (LCIA) methods. The relative importance of water consumption was analyzed by integrating the method into the Eco-indicator-99 LCIA method. The relative impact of water consumption in LCIA was analyzed with a case study on worldwide cotton production. The importance of regionalized characterization factors for water use was also examined in the case study. In arid regions, water consumption may dominate the aggregated life-cycle impacts of cotton-textile production. Therefore, the consideration of water consumption is crucial in life-cycle assessment (LCA) studies that include water-intensive products, such as agricultural goods. A regionalized assessment is necessary, since the impacts of water use vary greatly as a function of location. The presented method is useful for environmental decision-support in the production of water-intensive products as well as for environmentally responsible value-chain management.

  6. Building a model based on scientific consensus for Life Cycle Impact Assessment of chemicals:

    DEFF Research Database (Denmark)

    Hauschild, Michael Zwicky; Huijbregts, Mark; Jolliet, Olivier

    2008-01-01

    Achieving consensus among scientists is often a challenge - particularly in model development. In this article we describe a recent scientific consensus-building process for Life Cycle Impact Assessment (LCIA) models applied to chemical emissions - including the strategy, execution, and results...

  7. USEEIO Elementary Flows and Life Cycle Impact Assessment (LCIA) Characterization Factors

    Data.gov (United States)

    U.S. Environmental Protection Agency — This file contains all the elementary flows (defined in ISO 14044) used in the USEEIO model. The elementary flows come from a draft master list used by USEPA...

  8. USEEIO v1.1 - Elementary Flows and Life Cycle Impact Assessment (LCIA) Characterization Factors

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset is part of the USEEIO v1.1 model release. It provides the elementary flows used in the USEEIO v1.1 Satellite Tables (DOI: 10.23719/1365565) and their...

  9. From species sensitivity to hypoxia to effect factors modelling in life cycle impact assessment (LCIA)

    DEFF Research Database (Denmark)

    Cosme, Nuno Miguel Dias; Hauschild, Michael Zwicky

    ’s sensitivity in five climate zone (polar, subpolar, temperate, subtropical, tropical). Species Sensitivity Distribution (SSD) curves combining DO concentrations and Potentially Affected Fractions (PAF) of species were plotted to estimate hazard concentrations (HC50LOEL) per climate zone, and Effect Factors (EF...

  10. Coupling ecosystems exposure to nitrogen and species sensitivity to hypoxia: modelling marine eutrophication in LCIA

    DEFF Research Database (Denmark)

    Cosme, Nuno Miguel Dias; Koski, Marja; Hauschild, Michael Zwicky

    Characterisation modelling in Life Cycle Impact Assessment (LCIA) quantifies impacts of anthropogenic emissions by applying substance-specific impact potentials, or Characterisation Factors (CF), to the amount of substances emitted. Nitrogen (N) emissions from human activities enrich coastal marine...... ecosystems and promote planktonic growth that may lead to marine eutrophication impacts. Excessive algal biomass and dissolved oxygen (DO) depletion typify the ecosystem response to the nutrient input. The present novel method couples a mechanistic model of coastal biological processes that determines...... the ecosystem response (exposure) to anthropogenic N enrichment (eXposure Factor, XF [kgO2·kgN-1]) with the sensitivity of species exposed to oxygen-depleted waters (Effect Factor, EF [(PAF)·m3·kgO2-1], expressed as a Potentially Affected Fraction (PAF) of species). Thus, the coupled indicator (XF*EF, [(PAF)·m3...

  11. Sensitivity analysis of the use of Life Cycle Impact Assessment methods: a case study on building materials

    DEFF Research Database (Denmark)

    Bueno, Cristiane; Hauschild, Michael Zwicky; Rossignolo, Joao Adriano

    2016-01-01

    The main aim of this research is to perform a sensitivity analysis of a Life Cycle Assessment (LCA) case study to understand if the use of different Life Cycle Impact Assessment (LCIA) methods may lead to different conclusions by decision makers and stakeholders. A complete LCA was applied to non...

  12. Indicators for human toxicity in Life Cycle Impact Assessment

    DEFF Research Database (Denmark)

    Krewitt, Wolfram; Pennington, David W.; Olsen, Stig Irving

    2002-01-01

    The main objectives of this task group under SETAC-Europe’s Second Working Group on Life Cycle Impact Assessment (LCIA-WIA2) were to identify and discuss the suitability of toxicological impact measures for human health for use in characterization in LCIA. The current state of the art of defining......, as well as potency. Quantitative severity-based indicators yield measures in terms of Years of Life Lost (YOLL), Disability Adjusted Life Years (DALY), Quality Adjusted Life Years (QALY) and other similar measures. DALYs and QALYs are examples of approaches that attempt to account for both years of life...... such as No Observed Effect Levels (NOEL). NOELs, and similar data, are determined in laboratory studies using rodents and are then extrapolated to more relevant human measures. Many examples also exist of measures and methods beyond potency-based indicators that attempt to account for differences in expected severity...

  13. Implementation of life cycle impact assessment methods. Data v2.0 (2007). Ecoinvent report No. 3

    International Nuclear Information System (INIS)

    Frischknecht, R.; Jungbluth, N.; Althaus, H.-J.; Hischier, R.; Doka, G.; Bauer, Ch.; Dones, R.; Nemecek, T.; Hellweg, S.; Humbert, S.; Margni, M.; Koellner, T.; Loerincik, Y.

    2007-12-01

    The ecoinvent database offers life cycle inventory (LCI) and life cycle impact assessment (LCIA) results. The following LCIA methods are implemented in the ecoinvent data v2.0: CML 2001; Cumulative energy demand; Cumulative exergy demand; Eco-indicator 99; Ecological footprint; Ecological scarcity 1997; Ecosystem damage potential EDP; EDIP'97 and 2003 (Environmental design of industrial products); EPS 2000 (environmental priority strategies in product development (will be provided with ecoinvent data v2.1)); IMPACT 2002+; IPCC 2001 (climate change); TRACI; Selected life cycle inventory indicators. There is a range of methodological problems and questions while linking the LCIA methods with the elementary flows of a database. This lead to different results in the past, even if the same LCIA method was applied on the same inventory results. The aim of this report is to avoid such discrepancies. In the first part of this report the general assumptions for the implementation of impact assessment methods on the ecoinvent life cycle inventory data are described. For that purpose, general and harmonised rules were developed how to deal with a certain problem. The second part of this report contains a detailed description of the implementation of the above mentioned methods. Please refer to the original publications for a general description and the scientific background of the methods. It is strongly recommended to read the original publications before using the LCIA results from the ecoinvent database. It is recommended to follow these implementation guidelines also while using other or new LCIA methods, which are so far not implemented in ecoinvent data. (authors)

  14. Implementation of life cycle impact assessment methods. Data v2.0 (2007). Ecoinvent report No. 3

    Energy Technology Data Exchange (ETDEWEB)

    Frischknecht, R. (ed.) [Ecoinvent Centre, Swiss Federal Laboratories for Materials Testing and Research (EMPA), Duebendorf (Switzerland); Jungbluth, N. (ed.) [ESU-services Ltd, Uster (Switzerland); Althaus, H.-J.; Hischier, R. [Swiss Federal Laboratories for Materials Testing and Research (EMPA), Duebendorf (Switzerland); Doka, G. [Doka Life Cycle Assessments (LCA), Zuerich (Switzerland); Bauer, Ch.; Dones, R. [Paul Scherrer Institute (PSI), Villigen (Switzerland); Nemecek, T. [Forschungsanstalt Agroscope Reckenholz-Taenikon (ART), Zuerich (Switzerland); Hellweg, S. [Swiss Federal Institute of Technology (ETHZ), Institute for Chemicals and Bioengineering (ICB), Zuerich (Switzerland); Humbert, S.; Margni, M. [Swiss Federal Institute of Technology (EPFL), Lausanne (Switzerland); Koellner, T. [Swiss Federal Institute of Technology (ETHZ), Zuerich (Switzerland); Loerincik, Y. [Ecointesys, Swiss Federal Institute of Technology (EPFL), Lausanne (Switzerland)

    2007-12-15

    The ecoinvent database offers life cycle inventory (LCI) and life cycle impact assessment (LCIA) results. The following LCIA methods are implemented in the ecoinvent data v2.0: CML 2001; Cumulative energy demand; Cumulative exergy demand; Eco-indicator 99; Ecological footprint; Ecological scarcity 1997; Ecosystem damage potential EDP; EDIP'97 and 2003 (Environmental design of industrial products); EPS 2000 (environmental priority strategies in product development (will be provided with ecoinvent data v2.1)); IMPACT 2002+; IPCC 2001 (climate change); TRACI; Selected life cycle inventory indicators. There is a range of methodological problems and questions while linking the LCIA methods with the elementary flows of a database. This lead to different results in the past, even if the same LCIA method was applied on the same inventory results. The aim of this report is to avoid such discrepancies. In the first part of this report the general assumptions for the implementation of impact assessment methods on the ecoinvent life cycle inventory data are described. For that purpose, general and harmonised rules were developed how to deal with a certain problem. The second part of this report contains a detailed description of the implementation of the above mentioned methods. Please refer to the original publications for a general description and the scientific background of the methods. It is strongly recommended to read the original publications before using the LCIA results from the ecoinvent database. It is recommended to follow these implementation guidelines also while using other or new LCIA methods, which are so far not implemented in ecoinvent data. (authors)

  15. Integrative Application of Life Cycle Assessment and Risk Assessment to Environmental Impacts of Anthropogenic Pollutants at a Watershed Scale.

    Science.gov (United States)

    Lin, Xiaodan; Yu, Shen; Ma, Hwongwen

    2018-01-01

    Intense human activities have led to increasing deterioration of the watershed environment via pollutant discharge, which threatens human health and ecosystem function. To meet a need of comprehensive environmental impact/risk assessment for sustainable watershed development, a biogeochemical process-based life cycle assessment and risk assessment (RA) integration for pollutants aided by geographic information system is proposed in this study. The integration is to frame a conceptual protocol of "watershed life cycle assessment (WLCA) for pollutants". The proposed WLCA protocol consists of (1) geographic and environmental characterization mapping; (2) life cycle inventory analysis; (3) integration of life-cycle impact assessment (LCIA) with RA via characterization factor of pollutant of interest; and (4) result analysis and interpretation. The WLCA protocol can visualize results of LCIA and RA spatially for the pollutants of interest, which might be useful for decision or policy makers for mitigating impacts of watershed development.

  16. Environmental life cycle assessment of water supply in South Africa ...

    African Journals Online (AJOL)

    The life cycle impact assessment (LCIA) phase of LCAs evaluates the ... considered where water is used in the manufacturing sector of South Africa, and to identify ... The boosting requirements attribute most to the electricity dependency of the ...

  17. Integrated earth system dynamic modeling for life cycle impact assessment of ecosystem services.

    Science.gov (United States)

    Arbault, Damien; Rivière, Mylène; Rugani, Benedetto; Benetto, Enrico; Tiruta-Barna, Ligia

    2014-02-15

    Despite the increasing awareness of our dependence on Ecosystem Services (ES), Life Cycle Impact Assessment (LCIA) does not explicitly and fully assess the damages caused by human activities on ES generation. Recent improvements in LCIA focus on specific cause-effect chains, mainly related to land use changes, leading to Characterization Factors (CFs) at the midpoint assessment level. However, despite the complexity and temporal dynamics of ES, current LCIA approaches consider the environmental mechanisms underneath ES to be independent from each other and devoid of dynamic character, leading to constant CFs whose representativeness is debatable. This paper takes a step forward and is aimed at demonstrating the feasibility of using an integrated earth system dynamic modeling perspective to retrieve time- and scenario-dependent CFs that consider the complex interlinkages between natural processes delivering ES. The GUMBO (Global Unified Metamodel of the Biosphere) model is used to quantify changes in ES production in physical terms - leading to midpoint CFs - and changes in human welfare indicators, which are considered here as endpoint CFs. The interpretation of the obtained results highlights the key methodological challenges to be solved to consider this approach as a robust alternative to the mainstream rationale currently adopted in LCIA. Further research should focus on increasing the granularity of environmental interventions in the modeling tools to match current standards in LCA and on adapting the conceptual approach to a spatially-explicit integrated model. Copyright © 2013 Elsevier B.V. All rights reserved.

  18. Site-dependent life-cycle impact assessment of acidification

    DEFF Research Database (Denmark)

    Potting, Josepha Maria Barbara; Schöpp, W.; Blok, Kornelis

    1998-01-01

    The lack of spatial differentiation in current life-cycle impact assessment (LCIA) affects the relevance of the assessed impact. This article first describes a framework for constructing factors relating the region of emission to the acidifying impact on its deposition areas. Next, these factors...... are established for 44 European regions with the help of the RAINS model, an integrated assessment model that combines information on regional emission levels with information on long-range atmospheric transport to estimate patterns of deposition and concentration for comparison with critical loads and thresholds...

  19. Parameter variation and scenario analysis in impact assessments of emerging energy technologies

    OpenAIRE

    Breunig, Hanna Marie

    2015-01-01

    There is a global need for energy technologies that reduce the adverse impacts of societal progress and that address today's challenges without creating tomorrow's problems. Life cycle impact assessment (LCIA) can support technology developers in achieving these prerequisites of sustainability by providing a systems perspective. However, modeling the early-stage scale up and impacts of technology systems may lead to unreliable or incomplete results due to a lack of representative technical, s...

  20. Impacts of “metals” on human health

    DEFF Research Database (Denmark)

    Pizzol, Massimo; Christensen, Per; Schmidt, Jannick Højrup

    2011-01-01

    This paper looks into the differences and uncertainties in determining the impact of “metals” emissions on human health, in Life Cycle Impact Assessment (LCIA). Metals are diverse substances, with different properties and characteristics, considered important in LCIA because of their toxicity...... to humans and ecosystems. First, we defined a list of the most significant metals in terms of impacts on human health. This was done according to precise criteria accounting for both physical and toxic properties of the metals. Second, we performed a LCIA on different key processes using various existing...... to the total impact on human health changes greatly according to the LCIA method used. These differences are due mainly to the number of metals included in each method and to the technique used to calculate the characterization factors. Results obtained with USEtox show no apparent correlation with results...

  1. Health effects from indoor and outdoor exposure to fine particulate matter in life cycle impact assessment

    DEFF Research Database (Denmark)

    Fantke, Peter; McKone, T.E.; Jolliet, Olivier

    2016-01-01

    Exposure to fine particulate matter (PM2.5) pollution is a major contributor to human disease burden as continuously shown in the Global Burden of Disease study series. Exposures to PM2.5 concentration outdoors and indoors contribute almost equally to this burden. Despite the importance, health...... impacts from exposure to PM2.5 are often excluded from life cycle impact assessment (LCIA) characterization profiles. This is in large part because of the lack of well-vetted harmonized guidance about how to consistently assess the exposures and impacts of indoor and outdoor emissions of PM2.5 and its...... precursors. We present a framework for calculating characterization factors for indoor and outdoor emissions of primary PM2.5 and secondary PM2.5 precursors, and a roadmap for further refining this modelling framework for operational use in LCIA. The framework was developed over the last three years...

  2. Climate impacts of bioenergy: Inclusion of carbon cycle and albedo dynamics in life cycle impact assessment

    International Nuclear Information System (INIS)

    Bright, Ryan M.; Cherubini, Francesco; Strømman, Anders H.

    2012-01-01

    Life cycle assessment (LCA) can be an invaluable tool for the structured environmental impact assessment of bioenergy product systems. However, the methodology's static temporal and spatial scope combined with its restriction to emission-based metrics in life cycle impact assessment (LCIA) inhibits its effectiveness at assessing climate change impacts that stem from dynamic land surface–atmosphere interactions inherent to all biomass-based product systems. In this paper, we focus on two dynamic issues related to anthropogenic land use that can significantly influence the climate impacts of bioenergy systems: i) temporary changes to the terrestrial carbon cycle; and ii) temporary changes in land surface albedo—and illustrate how they can be integrated within the LCA framework. In the context of active land use management for bioenergy, we discuss these dynamics and their relevancy and outline the methodological steps that would be required to derive case-specific biogenic CO 2 and albedo change characterization factors for inclusion in LCIA. We demonstrate our concepts and metrics with application to a case study of transportation biofuel sourced from managed boreal forest biomass in northern Europe. We derive GWP indices for three land management cases of varying site productivities to illustrate the importance and need to consider case- or region-specific characterization factors for bioenergy product systems. Uncertainties and limitations of the proposed metrics are discussed. - Highlights: ► A method for including temporary surface albedo and carbon cycle changes in Life Cycle Impact Assessment (LCIA) is elaborated. ► Concepts are applied to a single bioenergy case whereby a range of feedstock productivities are shown to influence results. ► Results imply that case- and site-specific characterization factors can be essential for a more informed impact assessment. ► Uncertainties and limitations of the proposed methodologies are elaborated.

  3. How does the choice of ILCD’s recommended methods change the assessment of environmental impacts in LCA of products?

    DEFF Research Database (Denmark)

    Owsianiak, Mikolaj; Laurent, Alexis; Bjørn, Anders

    2014-01-01

    on human health and impacts from land use on natural environment; between 1 and 3 orders of magnitude for metal depletion and for toxicity-related impact categories; and within 1 order of magnitude for the remaining impact categories.These differences are caused by the differences in underlying...... environmental impacts and there is large difference in demand for output from that process between the compared options. Nevertheless, the choice of ILCD' matters the most for assessment of impacts from ionizing radiation, land use, resource depletion (minerals), and all toxicity-related impact categories......The European Commission has launched a recommended set of characterization methods for application inlife cycle impact assessment (LCIA). However, it is not known yet whether the choice of the recommended practice, referred to as the ILCD, over existing LCIA methodologies matter for interpretation...

  4. OMNIITOX - operational life-cycle impact assessment models and information tools for practitioners

    DEFF Research Database (Denmark)

    Molander, S; Lidholm, Peter; Schowanek, Diederik

    2004-01-01

    of the characterisation model(s) and limited input data on chemical properties, which often has resulted in the omission of toxicants from the LCIA, or at best focus on well characterised chemicals. The project addresses both problems and integrates models, as well as data, in an information system – the OMNIITOX IS....... There is also a need for clarification of the relations between the (environmental) risk assessments of toxicants and LCIA, in addition to investigating the feasibility of introducing LCA into European chemicals legislation, tasks that also were addressed in the project.......This article is the preamble to a set of articles describing initial results from an on-going European Commission funded, 5th Framework project called OMNIITOX, Operational Models aNd Information tools for Industrial applications of eco/TOXicological impact assessments. The different parts...

  5. Characterization of waterborne nitrogen emissions for marine eutrophication modelling in life cycle impact assessment at the damage level and global scale

    DEFF Research Database (Denmark)

    Cosme, Nuno Miguel Dias; Hauschild, Michael Zwicky

    2017-01-01

    Current life cycle impact assessment (LCIA) methods lack a consistent and globally applicable characterization model relating nitrogen (N, as dissolved inorganic nitrogen, DIN) enrichment of coastal waters to the marine eutrophication impacts at the endpoint level. This paper introduces a method...... to calculate spatially explicit characterization factors (CFs) at endpoint and damage to ecosystems levels, for waterborne nitrogen emissions, reflecting their hypoxia-related marine eutrophication impacts, modelled for 5772 river basins of the world....

  6. Exploring REACH as a potential data source for characterizing ecotoxicity in life cycle assessment.

    Science.gov (United States)

    Müller, Nienke; de Zwart, Dick; Hauschild, Michael; Kijko, Gaël; Fantke, Peter

    2017-02-01

    Toxicity models in life cycle impact assessment (LCIA) currently only characterize a small fraction of marketed substances, mostly because of limitations in the underlying ecotoxicity data. One approach to improve the current data situation in LCIA is to identify new data sources, such as the European Registration, Evaluation, Authorisation, and Restriction of Chemicals (REACH) database. The present study explored REACH as a potential data source for LCIA based on matching reported ecotoxicity data for substances that are currently also included in the United Nations Environment Programme/Society for Environmental Toxicology and Chemistry (UNEP/SETAC) scientific consensus model USEtox for characterizing toxicity impacts. Data are evaluated with respect to number of data points, reported reliability, and test duration, and are compared with data listed in USEtox at the level of hazardous concentration for 50% of the covered species per substance. The results emphasize differences between data available via REACH and in USEtox. The comparison of ecotoxicity data from REACH and USEtox shows potential for using REACH ecotoxicity data in LCIA toxicity characterization, but also highlights issues related to compliance of submitted data with REACH requirements as well as different assumptions underlying regulatory risk assessment under REACH versus data needed for LCIA. Thus, further research is required to address data quality, pre-processing, and applicability, before considering data submitted under REACH as a data source for use in LCIA, and also to explore additionally available data sources, published studies, and reports. Environ Toxicol Chem 2017;36:492-500. © 2016 SETAC. © 2016 SETAC.

  7. Research Needs and Challenges from Science to Decision Support. Lesson Learnt from the Development of the International Reference Life Cycle Data System (ILCD Recommendations for Life Cycle Impact Assessment

    Directory of Open Access Journals (Sweden)

    Serenella Sala

    2012-06-01

    Full Text Available Environmental implications of the whole supply-chain of products, both goods and services, their use, and waste management, i.e., their entire life cycle from “cradle to grave” have to be considered to achieve more sustainable production and consumption patterns. Progress toward environmental sustainability requires enhancing the methodologies for quantitative, integrated environmental assessment and promoting the use of these methodologies in different domains. In the context of Life Cycle Assessment (LCA of products, in recent years, several methodologies have been developed for Life Cycle Impact Assessment (LCIA. The Joint Research Center of the European Commission (EC-JRC led a “science to decision support” process which resulted in the International Reference Life Cycle Data System (ILCD Handbook, providing guidelines to the decision and application of methods for LCIA. The Handbook is the result of a comprehensive process of evaluation and selection of existing methods based on a set of scientific and stakeholder acceptance criteria and involving review and consultation by experts, advisory groups and the public. In this study, we report the main features of the ILCD LCIA recommendation development highlighting relevant issues emerged from this “from science to decision support” process in terms of research needs and challenges for LCIA. Comprehensiveness of the assessment, as well as acceptability and applicability of the scientific developments by the stakeholders, are key elements for the design of new methods and to guarantee the mainstreaming of the sustainability concept.

  8. A framework for social life cycle impact assessment

    DEFF Research Database (Denmark)

    Dreyer, Louise Camilla; Hauschild, Michael Zwicky; Schierbeck, Jens

    2006-01-01

    Goal, Scope and Background. To enhance the use of life cycle assessment (LCA) as a tool in business decision-making, a methodology for Social life cycle impact assessment (LCIA) is being developed. Social LCA aims at facilitating companies to conduct business in a socially responsible manner...... by providing information about the potential social impacts on people caused by the activities in the life cycle of their product. The development of the methodology has been guided by a business perspective accepting that companies, on the one hand, have responsibility for the people affected...... in the life cycle rather than to the individual industrial processes, as is the case in Environmental LCA. Inventory analysis is therefore focused on the conduct of the companies engaged in the life cycle. A consequence of this view is that a key must be determined for relating the social profiles...

  9. Influence of the impact assessment method on the conclusions of a LCA study. Application to the case of a part made with virgin and recycled HDPE.

    Science.gov (United States)

    Simões, Carla L; Xará, Susana M; Bernardo, C A

    2011-10-01

    Recent legislation has stressed the need to decide the best end-of-life (EoL) option for post-consumer products considering their full life-cycle and the corresponding overall environmental impacts. The life cycle assessment (LCA) technique has become a common tool to evaluate those impacts. The present study aimed to contribute to the better understanding of the application of this technique, by evaluating the influence of the selection of the life cycle impact assessment (LCIA) method in its results and conclusions. A specific case study was chosen, using previous information related to an anti-glare lamellae (AGL) for highway use, made with virgin and recycled high-density polyethylene (HDPE). Five distinct LCIA methods were used: Eco-indicator 99, CML 2 (2000), EPS 2000, Eco-indicator 95 and EDIP 97. Consistent results between these methods were obtained for the Climate change, Ozone layer depletion, Acidification and Eutrophication environmental indicators. Conversely, the Summer smog indicator showed large discrepancies between impact assessment methods. The work sheds light on the advantages inherent in using various LCIA methods when doing the LCA study of a specific product, thus evidencing complementary analysis perspectives.

  10. Exploring REACH as a potential data source for characterizing ecotoxicity in life cycle assessment

    DEFF Research Database (Denmark)

    Müller, Nienke; de Zwart, Dick; Hauschild, Michael Zwicky

    2017-01-01

    Toxicity models in life cycle impact assessment (LCIA) currently only characterize a small fraction of marketed substances, mostly because of limitations in the underlying ecotoxicity data. One approach to improve the current data situation in LCIA is to identify new data sources, such as the Eur......Toxicity models in life cycle impact assessment (LCIA) currently only characterize a small fraction of marketed substances, mostly because of limitations in the underlying ecotoxicity data. One approach to improve the current data situation in LCIA is to identify new data sources......, such as the European Registration, Evaluation, Authorisation, and Restriction of Chemicals (REACH) database. The present study explored REACH as a potential data source for LCIA based on matching reported ecotoxicity data for substances that are currently also included in the United Nations Environment Programme....../Society for Environmental Toxicology and Chemistry (UNEP/SETAC) scientific consensus model USEtox for characterizing toxicity impacts. Data are evaluated with respect to number of data points, reported reliability, and test duration, and are compared with data listed in USEtox at the level of hazardous concentration for 50...

  11. Green tourism supply chain management based on life cycle impact assessment

    Directory of Open Access Journals (Sweden)

    Alexandra V. Michailidou

    2016-06-01

    Full Text Available Tourism is one of the most dynamic and far-reaching economic sectors in the world. Numerous different and complex activities are involved in the efficient development of tourism. These activities interrelate economic, environmental, social, cultural and political dimensions in the overall supply chain. However, apart from its key role as a driver of socio-economic progress, tourism is responsible for environmental deterioration, not only in areas popular with tourists, but also by enhancing climate change globally. This paper presents a robust method based on the Green Tourism Supply Chain Management (GTSCM concept, which can be used to estimate the effect on the environment that can be attributed to each link of the supply chain. The overall approach is based on Life Cycle Impact Assessment (LCIA theory and corresponding models. A case study to demonstrate the applicability of this approach is presented for two large seaside hotels located in Chalkidiki, Greece. Chalkidiki is the most popular tourist destination in Northern Greece. A LCIA questionnaire was developed and input data for the Life Cycle Assessment (LCA obtained from the hotel managers. For this LCA SimaPro 8 software was used. The LCIA methods chosen were Eco-indicator 99 and CML 2001. The effect on fossil fuel consumption of both hotels due to their use of local transport and electricity was considerable but less than that needed for transporting the tourists by air to Chalkidiki. This paper clearly indicates that LCA and Life Cycle Thinking (LCT can form the basis for promoting GTSCM in the tourism industry.

  12. Research Needs and Challenges from Science to Decision Support. Lesson Learnt from the Development of the International Reference Life Cycle Data System (ILCD) Recommendations for Life Cycle Impact Assessment

    DEFF Research Database (Denmark)

    Sala, Serenella; Pant, Rana; Hauschild, Michael Zwicky

    2012-01-01

    Environmental implications of the whole supply-chain of products, both goods and services, their use, and waste management, i.e., their entire life cycle from "cradle to grave" have to be considered to achieve more sustainable production and consumption patterns. Progress toward environmental...... sustainability requires enhancing the methodologies for quantitative, integrated environmental assessment and promoting the use of these methodologies in different domains. In the context of Life Cycle Assessment (LCA) of products, in recent years, several methodologies have been developed for Life Cycle Impact...... Assessment (LCIA). The Joint Research Center of the European Commission (EC-JRC) led a "science to decision support" process which resulted in the International Reference Life Cycle Data System (ILCD) Handbook, providing guidelines to the decision and application of methods for LCIA. The Handbook...

  13. Getting the chemicals right: addressing inorganics in sustainability assessments of technologies

    DEFF Research Database (Denmark)

    Müller, Nienke; Fantke, Peter

    sustainability assessments, the toxicity potential of several thousand organic chemicals is included in characterization models within life cycle impact assessment (LCIA). However, many economic production processes involve the use of inorganic chemicals to a large extent, while the related pressure on human...... and environmental health of environmental emissions of these substances is not yet fully understood and not included in any existing LCIA method. In th is presentation, we provide an overview of the relevance of inorganic chemicals and outline possible ways towards incorporating inorganic chemicals in LCIA toxicity......A main goal of sustainability research is to enable a technological development in industry and elsewhere that ensures that what is produced and how it is produced today does not harm the quality of human or environmental health for present and future generations. As part of current environmental...

  14. Life cycle assessment of a commercial rainwater harvesting system compared with a municipal water supply system

    Science.gov (United States)

    Building upon previously published life cycle assessment (LCA) methodologies, we conducted an LCA of a commercial rainwater harvesting (RWH) system and compared it to a municipal water supply (MWS) system adapted to Washington, D.C. Eleven life cycle impact assessment (LCIA) indi...

  15. Mode of action of LciA, the lactococcin A immunity protein

    NARCIS (Netherlands)

    Venema, K.; Haverkort, R.E.; Abee, T.; Haandrikman, A.J.; Leenhouts, K.J.; Leij, L. de; Venema, G.; Kok, J.

    Monoclonal antibodies were raised against a fusion between the Escherichia coli maltose-binding protein and LciA, the immunity protein that protects Lactococcus lactis against the effects of the bacteriocin lactococcin A. One of the antibodies directed against the LciA moiety of the fusion protein

  16. Global guidance on environmental life cycle impact assessment indicators: impacts of climate change, fine particulate matter formation, water consumption and land use

    DEFF Research Database (Denmark)

    Jolliet, Olivier; Antón, Assumpció; Boulay, Anne-Marie

    2018-01-01

    of water consumption on human health assesses the DALYs from malnutrition caused by lack of water for irrigated food production. Land use impacts: CFs representing global potential species loss from land use are proposed as interim recommendation suitable to assess biodiversity loss due to land use......Purpose: Guidance is needed on best-suited indicators to quantify and monitor the man-made impacts on human health, biodiversity and resources. Therefore, the UNEP-SETAC Life Cycle Initiative initiated a global consensus process to agree on an updated overall life cycle impact assessment (LCIA...... are recommended: (a) The global warming potential 100 years (GWP 100) represents shorter term impacts associated with rate of change and adaptation capacity, and (b) the global temperature change potential 100 years (GTP 100) characterizes the century-scale long term impacts, both including climate-carbon cycle...

  17. IMPACT 2002+, ReCiPe 2008 and ILCD’s recommended practice for characterization modelling in life cycle impact assessment: a case study-based comparison

    DEFF Research Database (Denmark)

    Owsianiak, Mikolaj; Laurent, Alexis; Bjørn, Anders

    2014-01-01

    Purpose The European Commission has launched a recommended set of characterization models and factors for application in life cycle impact assessment (LCIA). However, it is not known how this recommended practice, referred to as the ILCD 2009, performs relative to some of the most frequently used...... and ecosystems, all studied methodologies consistently identify the same window option as having the lowest and the highest environmental impact. This is mainly because few processes, associated with production of heat, dominate the total impacts, and there is a large difference in demand for heat between...... categories. The differences are somewhat smaller (within 1 order of magnitude) for the impact categories respiratory inorganics and photochemical ozone formation, and are within a factor of 3 for the remaining impact categories. The differences in impact scores in our case study are brought about...

  18. Holistic impact assessment and cost savings of rainwater harvesting at the watershed scale

    Directory of Open Access Journals (Sweden)

    Santosh R. Ghimire

    2017-03-01

    Full Text Available We evaluated the impacts of domestic and agricultural rainwater harvesting (RWH systems in three watersheds within the Albemarle-Pamlico river basin (southeastern U.S. using life cycle assessment (LCA and life cycle cost assessment. Life cycle impact assessment (LCIA categories included energy demand, fossil fuel, metals, ozone depletion, global warming, acidification, smog, blue and green water use, ecotoxicity, eutrophication, and human health effects. Building upon previous LCAs of near-optimal domestic and agricultural RWH systems in the region, we scaled functional unit LCIA scores for adoption rates of 25%, 50%, 75%, and 100% and compared these to conventional municipal water and well water systems. In addition to investigating watershed-scale impacts of RWH adoption, which few studies have addressed, potential life cycle cost savings due to reduced cumulative energy demand were scaled in each watershed for a more comprehensive analysis. The importance of managing the holistic water balance, including blue water (surface/ground water, green water (rainwater use, and annual precipitation and their relationship to RWH are also addressed. RWH contributes to water resource sustainability by offsetting surface and ground water consumption and by reducing environmental and human health impacts compared to conventional sources. A watershed-wide RWH adoption rate of 25% has a number of ecological and human health benefits including blue water use reduction ranging from 2–39 Mm3, cumulative energy savings of 12–210 TJ, and reduced global warming potential of 600–10,100 Mg CO2 eq. Potential maximum lifetime energy cost savings were estimated at $5M and $24M corresponding to domestic RWH in Greens Mill and agricultural RWH in Back Creek watersheds.

  19. Life cycle impact assessment of biodiesel using the ReCiPe method

    Directory of Open Access Journals (Sweden)

    Kiss Ferenc E.

    2013-01-01

    Full Text Available This paper presents the life cycle impact assessment (LCIA results of biodiesel produced from rapeseed oil. The functional unit (FU is defined as 3750 km of distance traveled by a truck fuelled with biodiesel. The reference flow is 1000 kg of biodiesel. The LCIA method used in the study is the ReCiPe method. At midpoint level the ReCiPe method addresses environmental issues within 18 impact categories. Most of these midpoint impact categories are further converted and aggregated into 3 endpoint categories (damage to human health, damage to ecosystem diversity, damage to mineral resource availability. The total impact of biodiesel’s life cycle was estimated at 540 Pt/FU. The damage to ecosystem diversity (1.48E-04 species•year/FU, the damage to human health (7.48E-03 DALY/FU and the damage to mineral resource availability (8.11E+03 US$/FU are responsible for 63%, 27% and 10% of the total negative impact in the life cycle of biodiesel, respectively. The results have revealed that only 4 impact categories are responsible for most of the impacts within the specific endpoint categories. These are impacts associated with global warming (3000 kg CO2 ekv./FU, particulate matter formation (12.4 kg PM ekv./FU, agricultural land occupation (6710 m2a./FU and fossil fuel depletion (21168 MJ/FU. Greenhouse gases emitted in the life cycle of biodiesel (mainly N2O, CO2 are responsibly for 56% of the damage caused to human health and for 16% of the damage caused to ecosystem diversity. Airborne emissions which contribute to particulate matter formation (NOx, NH3, PM, SO2 are responsible for 43% of the damage caused to human health. Agricultural land occupation is responsible for 82% of the damage caused to the ecosystem diversity. Damage to mineral resource availability is almost entirely related to the depletion of fossil energy sources. The production chain of biodiesel and the combustion of biodiesel are responsible for 69% and 31% of the total impact of

  20. Characterizing health impacts from indoor and outdoor exposure to fine particulates

    DEFF Research Database (Denmark)

    Vigon, Bruce; Fantke, Peter; McKone, Thomas E

    2016-01-01

    Exposure to fine particulate matter (PM2.5) pollution is a major contributor to human disease burden as continuously shown in the Global Burden of Disease study series. Exposures to PM2.5 concentration outdoors and indoors contribute almost equally to this burden. Despite the importance, health...... impacts from exposure to PM2.5 are often excluded from life cycle impact assessment (LCIA) characterization profiles. This is in large part because of the lack of well-vetted harmonized guidance about how to consistently assess the exposures and impacts of indoor and outdoor emissions of PM2.5 and its...... precursors. We present a framework for calculating characterization factors for indoor and outdoor emissions of primary PM2.5 and secondary PM2.5 precursors, and a roadmap for further refining this modelling framework for operational use in LCIA. The framework was developed over the last three years...

  1. Change Agents & Impact Assessment

    DEFF Research Database (Denmark)

    Kørnøv, Lone; Larsen, Sanne Vammen; Hansen, Anne Merrild

    2010-01-01

    One of the challenges facing impact assessment is finding ways to work in research and practice that allow appropriate action and critical interrogation og action to enable and support sustainable change.......One of the challenges facing impact assessment is finding ways to work in research and practice that allow appropriate action and critical interrogation og action to enable and support sustainable change....

  2. Environmental impact assessment report

    Energy Technology Data Exchange (ETDEWEB)

    Jung, K. J.; Paik, S. T.; Chung, U. S.; Jung, K. H.; Park, S. K.; Lee, D. G.; Kim, H. R.; Kim, J. K.; Yang, S. H.; Lee, B. J.; Kim, E. H.; Choi, K. S

    2000-10-01

    This report is the revised Environmental Impact Assessment Report which was made and submitted as one of the license documents for TRIGA Research Reactor D and D Project. The Environmental Impact Assessment Report includes introduction of decommissioning plan, status of reactors and environmental impact of surroundings. Also it was assessed and analyzed on radioactivity for environment, and the plan was established to minimize radioactive material release. Finally environmental monitoring plan was established to confirm whether contaminated or not from radioactivity during decommissioning period. According to the assessment results, the risk of excess exposure will be not on environment and public. The first Environmental Impact Assessment Report was submitted to the government for the license and reviewed by Korea Institute of Nuclear Safety. The first Report was revised including answers for the questions arising from review process.

  3. Impact assessment revisited

    DEFF Research Database (Denmark)

    Thiele, Jan; Kollmann, Johannes Christian; Markussen, Bo

    2010-01-01

    ; and (4) the total invaded range is an inappropriate measure for quantifying regional impact because the habitat area available for invasion can vary markedly among invasive species. Mathematical models and empirical data using an invasive alien plant species (Heracleum mantegazzianum) indicate......The theoretical underpinnings of the assessment of invasive alien species impacts need to be improved. At present most approaches are unreliable to quantify impact at regional scales and do not allow for comparison of different invasive species. There are four basic problems that need...... and we discuss the quantification of the invaded range. These improvements are crucial for impact assessment with the overall aim of prioritizing management of invasive species....

  4. Getting the chemicals right: Gaps and opportunities in addressing inorganics in life cycle assessment

    DEFF Research Database (Denmark)

    Fantke, Peter; Kirchhübel, Nienke

    2017-01-01

    and certain cationic metals is included in existing characterization models within life cycle impact assessment (LCIA). However, a variety of additional inorganic substances used e.g. in the textile, personal care, and building and construction industry are included neither in current life cycle inventory...... databases, nor current LCIA methods. Without the integration of the various economically relevant and potentially human toxic and/or ecotoxic inorganic substances such as inorganic salts, acids, bases and elements, however, no satisfying conclusions regarding the environmental sustainability of any......Life cycle assessment (LCA) is used to compare products and product systems in terms of their environmental sustainability and for that LCA needs to include all potential impacts on humans and the environment. Currently, quantifying the toxicity potential of several thousand organic substances...

  5. Towards the integration of orbital space use in Life Cycle Impact Assessment.

    Science.gov (United States)

    Maury, Thibaut; Loubet, Philippe; Ouziel, Jonathan; Saint-Amand, Maud; Dariol, Ludovic; Sonnemann, Guido

    2017-10-01

    A rising sustainability concern is occurring in the space sector: 29,000 human-made objects, larger than 10cm are orbiting the Earth but only 6% are operational spacecrafts. Today, space debris is today a significant and constant danger to all space missions. Consequently, it becomes compelled to design new space missions considering End-of-Life requirements in order to ensure the sustainable use of space orbits. Furthermore, Life Cycle Assessment (LCA) has been identified by the European Space Agency as an adequate tool to measure the environmental impact of spacecraft missions. Hence, our challenge is to integrate orbital space use into Life Cycle Impact Assessment (LCIA) to broaden the scope of LCA for space systems. The generation of debris in the near-Earth's orbital regions leads to a decrease in volume availability. The Area-of-Protection (AoP) 'resources' seems to be the most relevant reflection of this depletion. To address orbital space use in a comprehensive way, we propose a first attempt at establishing an impact pathway linking outer space use to resources. This framework will be the basis for defining new indicator(s) related to orbital space use. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. What are the elements required to improve exposure estimates in life cycle assessments?

    DEFF Research Database (Denmark)

    Ernstoff, Alexi; Rosenbaum, Ralph K.; Margni, Manuele

    2016-01-01

    human toxicity and ecosystem toxicity of chemicals posed by different product life cycle stages are characterized in the life cycle impact assessment (LCIA) phase. Exposure and effect quantification as part of LCIA toxicity characterization faces numerous challenges related to inventory analysis (e.......g. number and quantity of chemicals emitted), substance-specific modelling (e.g. organics, inorganics, nano-materials) in various environments and time horizons, human and ecosystem exposure quantification (e.g. exposed organisms and exposure pathways), and toxicity end-points (e.g. carcinogenicity...... chemical exposure and harmful effects. Thereby, we structure this study of key elements identified as areas of elevated public, industrial, regulatory, and scientific concerns. We found the majority of missing elements are directly related to the definition of exposed populations (both ecosystems...

  7. Ecological impact assessment

    International Nuclear Information System (INIS)

    Thomas, J.M.; Eberhardt, L.L.

    1975-01-01

    Quantitative problems in accomplishing ecological impact assessment with particular reference to defining population effects are discussed with some comments on the two approaches most commonly used, e.g., the experimental and simulation models. Some alternatives are suggested because both methods will probably fail to detect real population effects mostly due to poor understanding of ecosystems or because of the limitations inherent in field census methods. Most judgments of ecological impact are not quantitatively defensible but are qualitative, subjective, or political in nature. An examination of aggregates of data from various nuclear power plant sites may be one way to obtain enough replication to judge ecological impact. Thus, currently available data from such studies as well as appropriate demographic, vegetation, census, and bibliographic material could offer an interesting challenge to computer professionals if such an undertaking were contemplated. Present research programs at PNL and computer involvement are described. Future possibilities and directions are discussed. (U.S.)

  8. ENVIRONMENTAL IMPACT ASSESSMENT AND MONITORING ...

    African Journals Online (AJOL)

    protect the environment, it is imperative to conduct environmental impact assessment ... Ethiopia enacted the Environmental Impact Assessment Proclamation in 2002 ... flora, fauna, soil, air, water, climate, natural or cultural heritage, other.

  9. Animal welfare impact assessments

    DEFF Research Database (Denmark)

    Sandøe, Peter; Gamborg, Christian

    2017-01-01

    aimed at dealing with wild animals. McCulloch and Reiss argue that this could be remedied by means of a “mandatory application of formal and systematic Animal Welfare Impact Assessment (AWIA)”. Optimistically, they consider that an AWIA could help to resolve controversies involving wild animals. The aim...... is a welfare issue. Furthermore, we argue that AWIA is unlikely to prevent serious moral disagreements over how to weigh concerns about wild animals against priorities in human health, the health of domestic and farm animals, and biodiversity, but that it may nonetheless serve to limit harms imposed......Control of wild animals may give rise to controversy, as is seen in the case of badger control to manage TB in cattle in the UK. However, it is striking that concerns about the potential suffering of the affected animals themselves are often given little attention or completely ignored in policies...

  10. Social Impact Assessment in Europe

    DEFF Research Database (Denmark)

    Larsen, Sanne Vammen; Hansen, Anne Merrild; Lyhne, Ivar

    2015-01-01

    Social impact assessment (SIA) is applied worldwide to assess social impacts of plans and projects. In Europe, directives on environmental assessment (EA) require attention to social impacts, however, there is a need to investigate the implementation in practise. To this end, we study three Danish...... are not suggested or are postponed and the geographical distribution of impacts assessed is biased towards including negative local impacts. We discuss the scope and handling of social impacts, and possible implications. Based on this, we conclude with the view that EA might do the job of handling social impacts...... cases, which are characterised by debates and conflicts on social issues. Analysis of the EA statements shows inclusion of a broad range of social impacts. However, the EAs do not fully match the concerns of the public, and social impacts are not always analysed in depth, mitigation measures...

  11. Developments in Social Impact Assessment

    NARCIS (Netherlands)

    Vanclay, Frank

    2014-01-01

    Along with environmental impact assessment, social impact assessment (SIA) has its origins in the 1970s and has developed from being a tool to meet regulatory requirements, to a discipline that seeks to contribute proactively to better project and policy development and to enhance the wellbeing of

  12. Environmental Impact Assessment: A Procedure.

    Science.gov (United States)

    Stover, Lloyd V.

    Prepared by a firm of consulting engineers, this booklet outlines the procedural "whys and hows" of assessing environmental impact, particularly for the construction industry. Section I explores the need for environmental assessment and evaluation to determine environmental impact. It utilizes a review of the National Environmental Policy Act and…

  13. Life Cycle Assessment for the Production of Oil Palm Seeds.

    Science.gov (United States)

    Muhamad, Halimah; Ai, Tan Yew; Khairuddin, Nik Sasha Khatrina; Amiruddin, Mohd Din; May, Choo Yuen

    2014-12-01

    The oil palm seed production unit that generates germinated oil palm seeds is the first link in the palm oil supply chain, followed by the nursery to produce seedling, the plantation to produce fresh fruit bunches (FFB), the mill to produce crude palm oil (CPO) and palm kernel, the kernel crushers to produce crude palm kernel oil (CPKO), the refinery to produce refined palm oil (RPO) and finally the palm biodiesel plant to produce palm biodiesel. This assessment aims to investigate the life cycle assessment (LCA) of germinated oil palm seeds and the use of LCA to identify the stage/s in the production of germinated oil palm seeds that could contribute to the environmental load. The method for the life cycle impact assessment (LCIA) is modelled using SimaPro version 7, (System for Integrated environMental Assessment of PROducts), an internationally established tool used by LCA practitioners. This software contains European and US databases on a number of materials in addition to a variety of European- and US-developed impact assessment methodologies. LCA was successfully conducted for five seed production units and it was found that the environmental impact for the production of germinated oil palm was not significant. The characterised results of the LCIA for the production of 1000 germinated oil palm seeds showed that fossil fuel was the major impact category followed by respiratory inorganics and climate change.

  14. Life cycle assessment of advanced waste water treatment

    DEFF Research Database (Denmark)

    Larsen, Henrik Fred; Hansen, Peter Augusto

    The EU FP6 NEPTUNE project is related to the EU Water Framework Directive and the main goal is to develop new and optimize existing waste water treatment technologies (WWTT) and sludge handling methods for municipal waste water. Besides nutrients, a special focus area is micropollutants (e....... In total more that 20 different waste water and sludge treatment technologies are to be assessed. This paper will present the preliminary LCA results from running the induced versus avoided impact approach (mainly based on existing LCIA methodology) on one of the advanced treatment technologies, i...

  15. Privacy Impact Assessment (PIA) Repository

    Data.gov (United States)

    Department of Veterans Affairs — This repository contains Privacy Impact Assessments (PIA) that have been vetted/approved. Section 208 of the Electronic Government Act of 2002 (E-Gov Act) requires...

  16. Methodologies of environmental impact assessment

    International Nuclear Information System (INIS)

    Schroll, H.

    1994-01-01

    This article gives a brief introduction covering the objectives of environmental impact assessment (EIA) and sustainable development, before going on to describe the screening procedure to define the environmental and socio-economic impacts of projects. The EIA procedure outlined encompasses a description of the project, examination of all environmental effects (scoping), identification of existing and predicted environmental conditions and impacts, alternative measures and mitigating measures, co-ordination, with environmental regulations, public participation, and monitoring and approval of the EIA. (UK)

  17. Environmental impact assessment screening tool

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    An environmental assessment and impact planning software, SCREENER, was tested at a pilot project at the Cameco site (Port Hope). SCREENER was used to screen the impacts of a new construction project in accordance with the process and reporting requirements laid out in the Canadian Environmental Assessment Act. The software test concentrated on the activities that are directly involved with the structure construction and site preparation activities. In addition, a two and one half day training course was given to three AECB staff using the test case as a hands on example. The conclusion of this project is that an automated tool such as SCREENER (or Calyx, the new generation of environmental assessment tools from ESSA Software Ltd.), will help the AECB to standardize the approach to environmental assessment, assist in project planning, and save resources in the screening process. The new approach could allow to allocate AECB limited resources to the detailed assessments required for maximum impact activities. 2 figs. 7 refs.

  18. Environmental impact assessment screening tool

    International Nuclear Information System (INIS)

    1995-05-01

    An environmental assessment and impact planning software, SCREENER, was tested at a pilot project at the Cameco site (Port Hope). SCREENER was used to screen the impacts of a new construction project in accordance with the process and reporting requirements laid out in the Canadian Environmental Assessment Act. The software test concentrated on the activities that are directly involved with the structure construction and site preparation activities. In addition, a two and one half day training course was given to three AECB staff using the test case as a hands on example. The conclusion of this project is that an automated tool such as SCREENER (or Calyx, the new generation of environmental assessment tools from ESSA Software Ltd.), will help the AECB to standardize the approach to environmental assessment, assist in project planning, and save resources in the screening process. The new approach could allow to allocate AECB limited resources to the detailed assessments required for maximum impact activities

  19. Environmental impact assessment of fish farm hatcheries ...

    African Journals Online (AJOL)

    Environmental impact assessment of fish farm hatcheries management in lower ... Environmental impact assessments were taken to determine the causes of ... Of significance of impact assessment were activities like air, traffic, noise, had ...

  20. LCA as a Tool for Assessing Product and Process Oriented Eco-Innovations Undertaken by Enterprises

    Directory of Open Access Journals (Sweden)

    Rybaczewska-Błażejowska Magdalena

    2017-09-01

    Full Text Available This paper examines the application of life cycle assessment (LCA as an approach to foster the product and process oriented eco- innovation of enterprises, using the fruit and vegetable processing plant as an example. LCA, which is traditionally used to assess the impacts of a single product system on the environment, was applied in the enterprise context. This was made possible by forming an indicator describing the environmental profile of an enterprise, which is calculated by the sum of the multiplication of the environmental impact assessment (LCIA results for individual unit processes within a particular impact category and their weights reflecting the structure of production in an enterprise. In order to distinguish and indicate the direction in which an enterprise should undertake its eco-innovative actions (implementing eco-innovations within the product or production process the LCIA results are presented individually for products and production processes. The research was conducted in full compliance with the LCA methodology. LCA proved that the analysed enterprise has the largest negative impacts on the environment in the following impact categories: marine eco-toxicity, freshwater eco-toxicity, freshwater eutrophication, human toxicity and natural land transformation. They result primarily from the consumption of thermal and electric energy in the production processes. Therefore, to improve energy efficiency, the enterprise should take eco-innovative actions in the processes applied.

  1. Health impact assessment in Korea

    International Nuclear Information System (INIS)

    Kang, Eunjeong; Lee, Youngsoo; Harris, Patrick; Koh, Kwangwook; Kim, Keonyeop

    2011-01-01

    Recently, Health Impact Assessment has gained great attention in Korea. First, the Ministry of Environment introduced HIA within existing Environment Impact Assessment. Second, the Korea Institute for Health and Social Affairs began an HIA program in 2008 in alliance with Healthy Cities. In this short report, these two different efforts are introduced and their opportunities and challenges discussed. We believe these two approaches complement each other and both need to be strengthened. We also believe that both can contribute to the development of health in policy and project development and ultimately to improvements in the Korean population's health.

  2. Impact assessment in EU lawmaking

    NARCIS (Netherlands)

    Meuwese, Anne Claartje Margreet

    2008-01-01

    The European Commission introduced impact assessment (IA) in 2002 following recommendations from the Mandelkern group on Better Regulation. The basic rationale of IA is that proposals must be prepared on the basis of an analysis of whether regulatory intervention is needed and whether it is

  3. Environmental Impact Assessment in Antarctica

    NARCIS (Netherlands)

    Bastmeijer, C.J.; Roura, R.; Bastmeijer, K.; Koivurova, T.

    2008-01-01

    This publication focuses on the instrument of Environmental Impact Assessment (EIA) that has been developed within the Antarctic Treaty System (ATS) as one of the tools to promote environmental protection. The states involved in the ATS already recognized the importance of this instrument in 1975

  4. Impact assessment of commodity standards

    NARCIS (Netherlands)

    Ruben, Ruerd

    2017-01-01

    Voluntary commodity standards are widely used to enhance the performance of tropical agro-food chains and to support the welfare and sustainability of smallholder farmers. Different methods and approaches are used to assess the effectiveness and impact of these certification schemes at

  5. A framework for combining social impact assessment and risk assessment

    NARCIS (Netherlands)

    Mahmoudi, Hossein; Renn, Ortwin; Vanclay, Frank; Hoffmann, Volker; Karami, Ezatollah

    An increasing focus on integrative approaches is one of the current trends in impact assessment. There is potential to combine impact assessment with various other forms of assessment, such as risk assessment, to make impact assessment and the management of social risks more effective. We identify

  6. A framework for combining social impact assessment and risk assessment

    NARCIS (Netherlands)

    Mahmoudi, Hossein; Renn, Ortwin; Vanclay, Frank; Hoffmann, Volker; Karami, Ezatollah

    2013-01-01

    An increasing focus on integrative approaches is one of the current trends in impact assessment. There is potential to combine impact assessment with various other forms of assessment, such as risk assessment, to make impact assessment and the management of social risks more effective. We identify

  7. Assessment of Traffic Noise Impacts

    DEFF Research Database (Denmark)

    Rich, Jeppe Husted; Nielsen, Otto Anker

    2004-01-01

    A steady growth in traffic intensities in most urban areas throughout the world has forced planners and politicians to seriously consider the resulting environmental impact, such as traffic noise, accidents and air pollution. The assessment of such negative factors is needed in order to reveal...... the true social benefit of infrastructure plans. The paper presents a noise assessment model for the Copenhagen region, which brings together GIS technology and non-linear hedonic regression models to reveal the implicit costs of traffic noise measured as the marginal percentage loss in property values...

  8. A spatially-explicit data driven approach to assess the effect of agricultural land occupation on species groups

    Science.gov (United States)

    Elshout, P.; van Zelm, R.; Karuppiah, R.; Laurenzi, I.; Huijbregts, M.

    2013-12-01

    Change of vegetation cover and increased land use intensity can directly affect the natural habitat and the wildlife it houses. The actual impact of agricultural land use is region specific as crops are grown under various climatic conditions and ways of cultivation and refining. Furthermore, growing a specific crop in a tropical region may require clearance of rainforest while the same crop may replace natural grasslands in temperate regions. Within life cycle impact assessment (LCIA), methods to address impacts of land use on a global scale are still in need of development. We aim to extend existing methods to improve the robustness of LCIA by allowing spatial differentiation of agricultural land use impacts. The goal of this study is to develop characterization factors for the direct impact of land use on biodiversity, which results from the replacement of natural habitat with farmland. The characterization factor expresses the change in species richness under crop cultivation compared to the species richness in the natural situation over a certain area. A second goal was to identify the differences in impacts caused by cultivation of different crop types, sensitivity of different taxonomic groups, and differences in natural land cover. Empirical data on species richness were collected from literature for both natural reference situations and agricultural land use situations. Reference situations were selected on an ecoregion or biome basis. We calculated characterization factors for four crop groups (oil palm, low crops, cereals, and perennial grasses), four species groups (arthropods, birds, mammals, vascular plants), and six biomes.

  9. Area of Concern: a new paradigm in life cycle assessment for ...

    Science.gov (United States)

    Purpose: As a class of environmental metrics, footprints have been poorly defined, have shared an unclear relationship to life cycle assessment (LCA), and the variety of approaches to quantification have sometimes resulted in confusing and contradictory messages in the marketplace. In response, a task force operating under the auspices of the UNEP/SETAC Life Cycle Initiative project on environmental life cycle impact assessment (LCIA) has been working to develop generic guidance for developers of footprint metrics. The purpose of this paper is to introduce a universal footprint definition and related terminology as well as to discuss modelling implications.MethodsThe task force has worked from the perspective that footprints should be based on LCA methodology, underpinned by the same data systems and models as used in LCA. However, there are important differences in purpose and orientation relative to LCA impact category indicators. Footprints have a primary orientation toward society and nontechnical stakeholders. They are also typically of narrow scope, having the purpose of reporting only in relation to specific topics. In comparison, LCA has a primary orientation toward stakeholders interested in comprehensive evaluation of overall environmental performance and trade-offs among impact categories. These differences create tension between footprints, the existing LCIA framework based on the area of protection paradigm and the core LCA standards ISO14040/44.Res

  10. Sense-making and Impact Assessment

    DEFF Research Database (Denmark)

    Lyhne, Ivar

    The poster integrates knowledge about how we make sense of situations into SEA methodology to strengthen the staging of impact assessments and the process of scoping impacts.......The poster integrates knowledge about how we make sense of situations into SEA methodology to strengthen the staging of impact assessments and the process of scoping impacts....

  11. Environmental impact assessment Geopressure Subprogram

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-07-01

    This environmental impact assessment (EIA) addresses the expected programmatic activities of the Geopressure Subprogram of the Division of Geothermal Energy. The goal of the Geopressure Subprogram is to stimulate development of geopressured resources as an economic, reliable, operationally safe, and environmentally acceptable energy source. The subprogram includes activities in the areas of engineering research and development; resource exploration, assessment, and development; resource utilization including pilot and demonstration facilities; and environmental research and control technology development. It should be recognized that most of the subprogram activities extend over several years and are in their early stages of implementation at this time. The zones of potential geopressure development are in the region located along the Texas and Louisiana Gulf Coasts extending up to 200 miles (300 km) inland. Geopressured zones are sedimentary basins where water is trapped at high pressures within or below thick, nearly impermeable shale sequences. The confined water supports most or all of the weight of the overburden. This inhibits sediment compaction and causes formation pore pressure to exceed hydrostatic pressure. in sedimentary basins that are underlain by thin oceanic crust, upward thermal conduction from the mantle heats geopressured fluids and sediments to abnormally high temperatures, often in excess of 260 C (500 F).

  12. A Methodology for Inclusion of Terrestrial Ecotoxic Impacts of Metals in Life Cycle Impact Assessment

    DEFF Research Database (Denmark)

    Owsianiak, Mikolaj; Rosenbaum, Ralph K.; Hauschild, Michael Zwicky

    2011-01-01

    . For applications in LCIA, the tradeo between the level of geographical detail and the level of uncertainty in both spatially explicit and site-generic CFs remains to be investigated. e method highlights the importance of taking into account variability of soil properties in deriving operational characterization...

  13. Regionalization of land use impact models for life cycle assessment: Recommendations for their use on the global scale and their applicability to Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Pavan, Ana Laura Raymundo, E-mail: laurarpavan@gmail.com [Center for Water Resource and Environmental Studies, São Carlos School of Engineering, University of São Paulo, Av. Trabalhador São-Carlense 400, São Carlos 13566-590, SP (Brazil); Ometto, Aldo Roberto [Center for Water Resource and Environmental Studies, São Carlos School of Engineering, University of São Paulo, Av. Trabalhador São-Carlense 400, São Carlos 13566-590, SP (Brazil); Department of Production Engineering, São Carlos School of Engineering, University of São Paulo, Av. Trabalhador São-Carlense 400, São Carlos 13566-590, SP (Brazil)

    2016-09-15

    Life Cycle Assessment (LCA) is the main technique for evaluate the environmental impacts of product life cycles. A major challenge in the field of LCA is spatial and temporal differentiation in Life Cycle Impact Assessment (LCIA) methods, especially impacts resulting from land occupation and land transformation. Land use characterization modeling has advanced considerably over the last two decades and many approaches have recently included crucial aspects such as geographic differentiation. Nevertheless, characterization models have so far not been systematically reviewed and evaluated to determine their applicability to South America. Given that Brazil is the largest country in South America, this paper analyzes the main international characterization models currently available in the literature, with a view to recommending regionalized models applicable on a global scale for land use life cycle impact assessments, and discusses their feasibility for regionalized assessment in Brazil. The analytical methodology involves classification based on the following criteria: midpoint/endpoint approach, scope of application, area of data collection, biogeographical differentiation, definition of recovery time and reference situation; followed by an evaluation of thirteen scientific robustness and environmental relevance subcriteria. The results of the scope of application are distributed among 25% of the models developed for the European context, and 50% have a global scope. There is no consensus in the literature about the definition of parameters such biogeographical differentiation and reference situation, and our review indicates that 35% of the models use ecoregion division while 40% use the concept of potential natural vegetation. Four characterization models show high scores in terms of scientific robustness and environmental relevance. These models are recommended for application in land use life cycle impact assessments, and also to serve as references for the

  14. A framework for combining social impact assessment and risk assessment

    Energy Technology Data Exchange (ETDEWEB)

    Mahmoudi, Hossein, E-mail: mahmoudi@uni-hohenheim.de [Department of Social Sciences in Agriculture, University of Hohenheim (Germany); Environmental Sciences Research Institute, Shahid Beheshti University, G.C. (Iran, Islamic Republic of); Renn, Ortwin [Department of Technology and Environmental Sociology (and DIALOGIK), University of Stuttgart (Germany); Vanclay, Frank [Department of Cultural Geography, Faculty of Spatial Sciences, University of Groningen, Groningen (Netherlands); Hoffmann, Volker [Department of Social Sciences in Agriculture, University of Hohenheim (Germany); Karami, Ezatollah [College of Agriculture, Shiraz University, Shiraz (Iran, Islamic Republic of)

    2013-11-15

    An increasing focus on integrative approaches is one of the current trends in impact assessment. There is potential to combine impact assessment with various other forms of assessment, such as risk assessment, to make impact assessment and the management of social risks more effective. We identify the common features of social impact assessment (SIA) and social risk assessment (SRA), and discuss the merits of a combined approach. A hybrid model combining SIA and SRA to form a new approach called, ‘risk and social impact assessment’ (RSIA) is introduced. RSIA expands the capacity of SIA to evaluate and manage the social impacts of risky projects such as nuclear energy as well as natural hazards and disasters such as droughts and floods. We outline the three stages of RSIA, namely: impact identification, impact assessment, and impact management. -- Highlights: • A hybrid model to combine SIA and SRA namely RSIA is proposed. • RSIA can provide the proper mechanism to assess social impacts of natural hazards. • RSIA can play the role of ex-post as well as ex-ante assessment. • For some complicated and sensitive cases like nuclear energy, conducting a RSIA is necessary.

  15. A framework for combining social impact assessment and risk assessment

    International Nuclear Information System (INIS)

    Mahmoudi, Hossein; Renn, Ortwin; Vanclay, Frank; Hoffmann, Volker; Karami, Ezatollah

    2013-01-01

    An increasing focus on integrative approaches is one of the current trends in impact assessment. There is potential to combine impact assessment with various other forms of assessment, such as risk assessment, to make impact assessment and the management of social risks more effective. We identify the common features of social impact assessment (SIA) and social risk assessment (SRA), and discuss the merits of a combined approach. A hybrid model combining SIA and SRA to form a new approach called, ‘risk and social impact assessment’ (RSIA) is introduced. RSIA expands the capacity of SIA to evaluate and manage the social impacts of risky projects such as nuclear energy as well as natural hazards and disasters such as droughts and floods. We outline the three stages of RSIA, namely: impact identification, impact assessment, and impact management. -- Highlights: • A hybrid model to combine SIA and SRA namely RSIA is proposed. • RSIA can provide the proper mechanism to assess social impacts of natural hazards. • RSIA can play the role of ex-post as well as ex-ante assessment. • For some complicated and sensitive cases like nuclear energy, conducting a RSIA is necessary

  16. Public participation in Malawi's environmental impact assessment ...

    African Journals Online (AJOL)

    Since the adoption of the Environmental Management Act of 1996, Malawi has been using environmental impact assessment (EIA) as a tool for predicting and assessing the impact of development projects on the environment. This study assessed the extent of public participation in Malawi's EIA process. Desktop study of ...

  17. What is Health Impact Assessment?

    Directory of Open Access Journals (Sweden)

    Ahmet Soysal

    2010-12-01

    Full Text Available Health Impact Assessment (HIA was disseminated by World Health Organization (WHO European Region in Gothenburg consensus paper in 1999. In this consensus, HIA is defined as ‘a combination of procedures, methods and tools by which a policy, program or project may be judged as to its potential effects on the health of population and the distribution of those effects within the population’. HIA was accepted as a goal for 4th phase of healthy city projects between 2003- 2008. HIA is a new process for our country and especially municipal boroughs, local authorities interest with it. There is no legal base for HIA in our country. EIA practices conducted since 1993 showed us that, environmental and public health was postponed. Functional and decisive implementation of HAI depends on legal basis and national acceptance. If legal basis is supplied, society must take care about it, work for strict application and have to put a crimp in going back. [TAF Prev Med Bull 2010; 9(6.000: 689-694

  18. Human health impacts in the life cycle of future European electricity generation

    International Nuclear Information System (INIS)

    Treyer, Karin; Bauer, Christian; Simons, Andrew

    2014-01-01

    This paper presents Life Cycle Assessment (LCA) based quantification of the potential human health impacts (HHI) of base-load power generation technologies for the year 2030. Cumulative Greenhouse Gas (GHG) emissions per kWh electricity produced are shown in order to provide the basis for comparison with existing literature. Minimising negative impacts on human health is one of the key elements of policy making towards sustainable development: besides their direct impacts on quality of life, HHI also trigger other impacts, e.g. external costs in the health care system. These HHI are measured using the Life Cycle Impact Assessment (LCIA) methods “ReCiPe” with its three different perspectives and “IMPACT2002+”. Total HHI as well as the shares of the contributing damage categories vary largely between these perspectives and methods. Impacts due to climate change, human toxicity, and particulate matter formation are the main contributors to total HHI. Independently of the perspective chosen, the overall impacts on human health from nuclear power and renewables are substantially lower than those caused by coal power, while natural gas can have lower HHI than nuclear and some renewables. Fossil fuel combustion as well as coal, uranium and metal mining are the life cycle stages generating the highest HHI. - Highlights: • Life cycle human health impacts (HHI) due to electricity production are analysed. • Results are shown for the three ReCiPe perspectives and IMPACT2002+LCIA method. • Total HHI of nuclear and renewables are much below those of fossil technologies. • Climate change and human toxicity contribute most to total HHI. • Fossil fuel combustion and coal mining are the most polluting life cycle stages

  19. Radiation environmental impact assessment of copper exploitation

    International Nuclear Information System (INIS)

    Fan Guang; Wen Zhijian

    2010-01-01

    The radiation environmental impact of mineral exploitation on the surrounding environment has become a public concern. This paper presents the radiation environmental impact assessment of copper exploitation. Based on the project description and detailed investigations of surrounding environment, systematic radiation environmental impacts have been identified. The environmental impacts are assessed during both construction and operation phase. The environmental protection measures have also been proposed. The related conclusion and measures can play an active role in copper exploitation and environmental protection. (authors)

  20. USEtox: The UNEP-SETAC consensus model for life-cycle impacts on human health and ecosystems

    DEFF Research Database (Denmark)

    Hauschild, Michael Zwicky; McKone, Tom; Huijbregts, Mark A.J.

    2007-01-01

    Life cycle impact assessment (LCIA) characterizes emissions for the life-cycle assessment (LCA) of a product by translating these emissions into their potential impacts on human health, ecosystems, global climate and other resources. This process requires substance-specific characterization factors...... (CFs) that represent the relative potential of specific chemical emissions to impact human disease burden and ecosystem health. Within the Life Cycle Initiative, a joint initiative of the United Nations Environment Program (UNEP) and of the Society of Environmental Toxicology and Chemistry (SETAC...... and transparent tool for making human health and ecosystem CF estimates. The consensus model has now been used to calculate CFs for several thousand substances and is intended to form the basis of the recommendations from UNEP-SETAC‘s Life Cycle Initiative regarding characterization of toxic impacts in Life Cycle...

  1. Environmental impact assessment: Process and implementation

    International Nuclear Information System (INIS)

    Chen, S.Y.; Tsai, S.Y.

    1989-01-01

    In this paper, the procedures and issues regarding the preparation of an environmental impact assessment in accordance with the National Environmental Policy Act (NEPA) as promulgated by the US Congress in 1969 are discussed. NEPA procedures and requirements are covered in general, while particular attention is given to the preparation of the environmental impact assessment. Also included is a discussion of the social impact assessment. The aim of the social impact assessment is to address the social issues involved in enhancing public understanding of the hazardous risks, thereby mitigating any conflicts that may arise in the NEPA process. 3 refs., 1 fig., 1 tab

  2. Is Environmental Impact Assessment fulfilling its potential?

    DEFF Research Database (Denmark)

    Larsen, Sanne Vammen

    2014-01-01

    fuel with CO2-neutral energy sources. A variety of these projects are subject to environmental impact assessment (EIA), which raises the following questions: What role does an impact assessment play? When is the project environmentally friendly? How are climate change-related impacts assessed......One of the topics receiving much attention in recent years is climate change and the potential of its integration in impact assessment, both in terms of achieving mitigation and adaptation. Renewable energy projects are part of the efforts to mitigate climate change, replacing the use of fossil...... adaptation is absent. Also, the results show an emphasis on positive impacts in the reports, and in a few cases discussions of enhancements. Identification and assessment of negative climate change impacts are less apparent. This leads to a discussion of the results in the light of the purpose of EIA....

  3. Conceptualising the effectiveness of impact assessment processes

    International Nuclear Information System (INIS)

    Chanchitpricha, Chaunjit; Bond, Alan

    2013-01-01

    This paper aims at conceptualising the effectiveness of impact assessment processes through the development of a literature-based framework of criteria to measure impact assessment effectiveness. Four categories of effectiveness were established: procedural, substantive, transactive and normative, each containing a number of criteria; no studies have previously brought together all four of these categories into such a comprehensive, criteria-based framework and undertaken systematic evaluation of practice. The criteria can be mapped within a cycle/or cycles of evaluation, based on the ‘logic model’, at the stages of input, process, output and outcome to enable the identification of connections between the criteria across the categories of effectiveness. This framework is considered to have potential application in measuring the effectiveness of many impact assessment processes, including strategic environmental assessment (SEA), environmental impact assessment (EIA), social impact assessment (SIA) and health impact assessment (HIA). -- Highlights: • Conceptualising effectiveness of impact assessment processes. • Identification of factors influencing effectiveness of impact assessment processes. • Development of criteria within a framework for evaluating IA effectiveness. • Applying the logic model to examine connections between effectiveness criteria

  4. Conceptualising the effectiveness of impact assessment processes

    Energy Technology Data Exchange (ETDEWEB)

    Chanchitpricha, Chaunjit, E-mail: chaunjit@g.sut.ac.th [School of Environmental Health, Suranaree University of Technology, 111 University Avenue, Maung District, Nakhon Ratchasima 30000 (Thailand); Bond, Alan, E-mail: alan.bond@uea.ac.uk [School of Environmental Sciences, University of East Anglia, Norwich NR4 7TJ (United Kingdom); Unit for Environmental Sciences and Management School of Geo and Spatial Sciences, Internal Box 375, North West University (Potchefstroom campus) (South Africa)

    2013-11-15

    This paper aims at conceptualising the effectiveness of impact assessment processes through the development of a literature-based framework of criteria to measure impact assessment effectiveness. Four categories of effectiveness were established: procedural, substantive, transactive and normative, each containing a number of criteria; no studies have previously brought together all four of these categories into such a comprehensive, criteria-based framework and undertaken systematic evaluation of practice. The criteria can be mapped within a cycle/or cycles of evaluation, based on the ‘logic model’, at the stages of input, process, output and outcome to enable the identification of connections between the criteria across the categories of effectiveness. This framework is considered to have potential application in measuring the effectiveness of many impact assessment processes, including strategic environmental assessment (SEA), environmental impact assessment (EIA), social impact assessment (SIA) and health impact assessment (HIA). -- Highlights: • Conceptualising effectiveness of impact assessment processes. • Identification of factors influencing effectiveness of impact assessment processes. • Development of criteria within a framework for evaluating IA effectiveness. • Applying the logic model to examine connections between effectiveness criteria.

  5. Environmental impact assessment in the Nordic Countries

    International Nuclear Information System (INIS)

    Broden, K.; Palsson, S.E.; Poroddsson, P.

    2000-12-01

    A meeting on Environmental Impact Assessment has been held in Iceland, September 2-6, 2000. It was held within the framework of the project NKS/SOS-3 (Radioactive waste), subproject NKS/SOS-3.1 (Environmental Impact Assessment). The meeting included presentations, discussions and a study trip to the Egilsstadir and Myvatn districts. (au)

  6. AIDA: Asteroid Impact & Deflection Assessment

    Science.gov (United States)

    Cheng, A. F.; Galvez, A.; Carnelli, I.; Michel, P.; Rivkin, A.; Reed, C.

    2012-12-01

    To protect the Earth from a hazardous asteroid impact, various mitigation methods have been proposed, including deflection of the asteroid by a spacecraft impact. AIDA, consisting of two mission elements, the Double Asteroid Redirection Test (DART) and the Asteroid Impact Monitoring (AIM) mission, is a demonstration of asteroid deflection. To date, there has been no such demonstration, and there is major uncertainty in the result of a spacecraft impact onto an asteroid, that is, the amount of deflection produced by a given momentum input from the impact. This uncertainty is in part due to unknown physical properties of the asteroid surface, such as porosity and strength, and in part due to poorly understood impact physics such that the momentum carried off by ejecta is highly uncertain. A first mission to demonstrate asteroid deflection would not only be a major step towards gaining the capability to mitigate an asteroid hazard, but in addition it would return unique information on an asteroid's strength, other surface properties, and internal structure. This information return would be highly relevant to future human exploration of asteroids. We report initial results of the AIDA joint mission concept study undertaken by the Johns Hopkins Applied Physics Laboratory and ESA with support from NASA centers including Goddard, Johnson and Jet Propulsion Laboratory. For AIDA, the DART spacecraft impactor study is coordinated with an ESA study of the AIM mission, which would rendezvous with the same asteroid to measure effects of the impact. Unlike the previous Don Quijote mission study performed by ESA in 2005-2007, DART envisions an impactor spacecraft to intercept the secondary member of a binary near-Earth asteroid. DART includes ground-based observations to measure the deflection independently of the rendezvous spacecraft observations from AIM, which also measures deflection and provides detailed characterization of the target asteroid. The joint mission AIDA

  7. Rainwater harvesting human health and environmental impact assessment and sustainability analysis

    Data.gov (United States)

    U.S. Environmental Protection Agency — LCA/LCCA/LCIA data used to create figures and tables in the papers. This dataset is associated with the following publications: Ghimire, S., and J. Johnston....

  8. Comparison of metal toxic impacts between aquatic and terrestrial organisms: is the free ion concentration a sufficient descriptor?

    DEFF Research Database (Denmark)

    Owsianiak, Mikolaj; Rosenbaum, Ralph K.; Larsen, Henrik Fred

    2011-01-01

    Characterization of metal toxic impacts in comparative risk assessment and life cycle impact assessment (LCIA) should take into account metal speciation and interactions with soil/water organic constituents, because these mechanisms control metal bioavailability and may influence their toxic...... that the free metal ion is an appropriate “general”descriptor of metal toxicity. Results for 128 laboratory tests on Daphnia magna exposed to copper ions (Cu2+) in water show that variation of several orders of magnitude are observed between the toxicity tests. These variations may be a result of the inability...... of magnitude difference occur for the extreme case of barley (Hordeum vulgare). Given the scarcity of terrestrial effect data compared to aquatic data, reliable and transparent, mechanistic-based predictions of terrestrial toxic impacts from aquatic effect data would be an important step ahead in the context...

  9. Assessment of cooling tower impact

    International Nuclear Information System (INIS)

    1986-01-01

    This guideline describes the state of the art of the meteorological impact of wet cooling towers that are about 80 m to 170 m high, and have a waste heat power in the range of 1000 MW and 2500 MW. The physical processes occurring in the lowest layer of the atmosphere and their impact in the dispersion of cooling tower emissions are represented. On the basis of these facts, the impact on weather or climate in the vicinity of a high wet cooling tower is estimated. Thereby the results of the latest investigations (observations, measurements, and modeling) on the different locations of plants as well as their different power and construction types are taken into consideration. (orig.) [de

  10. Characterisation of social impacts in LCA. Part 1: Development of indicators for labour rights

    DEFF Research Database (Denmark)

    Dreyer, Louise Camilla; Hauschild, Michael Zwicky; Schierbeck, Jens

    2010-01-01

    dignity and well-being as the ultimate goal and area of protection of Social LCA. The intended main application of this framework for Social LCA was to support management decisions in companies who wish to conduct business in a socially responsible manner, by providing information about the potential...... social impacts on people caused by the activities in the life cycle of a product. Environmental LCA normally uses quantitative and comparable indicators to provide a simple representation of the environmental impacts from the product lifecycle. This poses a challenge to the Social LCA framework because......Background, Aim and Scope The authors have earlier suggested a framework for life cycle impact assessment (LCIA) to form the modelling basis of Social LCA. In this framework the fundamental labour rights were pointed out as obligatory issues to be addressed, and protection and promotion of human...

  11. Environmental impact assessment - a selected bibliography

    International Nuclear Information System (INIS)

    Lawson, W.J.

    1989-01-01

    This bibliography of literature relevant to the environmental impact assessment process is essentially a list of material dealing with the environmental impact assessment process held by Griffith University Library. The list is however well supplemented with citations of material not held in the Griffith University Library. Some economic and social impact assessment citations have been included in the bibliography, as the the environmental impact assessment concept has been interpreted very broadly. The citations are arranged according to broad subject areas, such as methodology, critical reviews, social impacts etc. Citations in each of these subject areas, which are listed in the table of contents, are identified by prefixes which are given in parentheses before the subjects headings. Within each subject area the citations are arragend in alphabetic author sequence

  12. Handbook for value-impact assessment

    International Nuclear Information System (INIS)

    Heaberlin, S.W.; Burnham, J.B.; Gallucci, R.H.V.

    1983-12-01

    The basic purpose of this handbook is to document a set of systematic procedures for providing information that can be used in performing value-impact assessments of Nuclear Regulatory Commission (NRC) regulatory actions. The handbook describes a structured but flexible process for performing the assessment. Chapter 1 is an introduction to the value-impact assessment process. Chapter 2 describes the attributes most frequently affected by proposed NRC actions, provides guidance concerningthe appropriate level of effort to be devoted to the assessment, suggests a standard format for documenting the assessment, and discusses the treatment of uncertainty. Chapter 3 contains detailed methods for evaluating each of the attributes affected by a regulatory action. The handbook has five appendixes containing background information, technical data, and example applications of the value-impact assessment procedures. This edition of the handbook focuses primarily on assessing nuclear power reactor safety issues

  13. Environmental assessment of different management options for individual waste fractions by means of life-cycle assessment modelling

    DEFF Research Database (Denmark)

    Manfredi, Simone; Tonini, Davide; Christensen, Thomas Højlund

    2011-01-01

    and environmental factors involved, including energy generation from landfill gas and storage of biogenic carbon. Leachate and gas emissions associated to each individual waste fraction have been estimated by means of a mathematical modelling. This approach towards landfilling emissions allows for a more precise...... quantification of the landfill impacts when comparing management options for selected waste fractions.Results from the life-cycle impact assessment (LCIA) show that the environmental performance estimated for landfilling with energy recovery of the fractions “organics” and “recyclable paper” is comparable...... with composting (for “organics”) and incineration (for “recyclable paper”). This however requires high degree of control over gas and leachate emissions, high gas collection efficiency and extensive gas utilization at the landfill. For the other waste fractions, recycling and incineration are favourable, although...

  14. Impact assessment of ionising radiation on wildlife

    International Nuclear Information System (INIS)

    Copplestone, D.; Bielby, S.; Jones, S.

    2001-01-01

    This R and D project was commissioned by the Environment Agency and English Nature in January 2001 to provide up-to-date information on the impacts of ionising radiation on wildlife, upon which a robust assessment approach may be developed. This approach will also feed into the European Commission funded project 'Framework for Assessment of Environmental Impact' (FASSET), due to complete in October 2003. This report describes the behaviour and transport of radionuclides in the environment, considers the impact of ionising radiation on wildlife, and makes recommendations on an approach for the impact assessment of ionising radiation on wildlife for England and Wales. The assessment approach focuses on three ecosystems representative of those considered potentially most at risk from the impact of authorised radioactive discharges, namely a coastal grassland (terrestrial ecosystem); estuarine and freshwater ecosystems. The likely scale of the impact on wildlife is also assessed in light of a preliminary analysis based on this assessment approach. The aims of the report are: to summarise the latest research on the behaviour, transfer and impact of ionising radiation effects on wildlife; an outline and review of the relevant European and national legislation which has impacts on the requirements for assessments of the impact of ionising radiation on wildlife in the UK; to consider the role of regulatory bodies in assessing the impact of ionising radiation on wildlife with respect to England and Wales; to make recommendations on the relative biological effectiveness of different types of radiation with respect to wildlife; and to recommend an approach to assess the impacts to wildlife from ionising radiation from authorised discharges in England and Wales, with spreadsheets to support the methodology. The report demonstrates the behaviour and transfer of radionuclides in a number of different ecosystem types. Particular emphasis is placed on exposure pathways in those

  15. Impact assessment: Eroding benefits through streamlining?

    Energy Technology Data Exchange (ETDEWEB)

    Bond, Alan, E-mail: alan.bond@uea.ac.uk [School of Environmental Sciences, University of East Anglia (United Kingdom); School of Geo and Spatial Sciences, North-West University (South Africa); Pope, Jenny, E-mail: jenny@integral-sustainability.net [Integral Sustainability (Australia); Curtin University Sustainability Policy Institute (Australia); Morrison-Saunders, Angus, E-mail: A.Morrison-Saunders@murdoch.edu.au [School of Geo and Spatial Sciences, North-West University (South Africa); Environmental Science, Murdoch University (Australia); Retief, Francois, E-mail: francois.retief@nwu.ac.za [School of Geo and Spatial Sciences, North-West University (South Africa); Gunn, Jill A.E., E-mail: jill.gunn@usask.ca [Department of Geography and Planning and School of Environment and Sustainability, University of Saskatchewan (Canada)

    2014-02-15

    This paper argues that Governments have sought to streamline impact assessment in recent years (defined as the last five years) to counter concerns over the costs and potential for delays to economic development. We hypothesise that this has had some adverse consequences on the benefits that subsequently accrue from the assessments. This hypothesis is tested using a framework developed from arguments for the benefits brought by Environmental Impact Assessment made in 1982 in the face of the UK Government opposition to its implementation in a time of economic recession. The particular benefits investigated are ‘consistency and fairness’, ‘early warning’, ‘environment and development’, and ‘public involvement’. Canada, South Africa, the United Kingdom and Western Australia are the jurisdictions tested using this framework. The conclusions indicate that significant streamlining has been undertaken which has had direct adverse effects on some of the benefits that impact assessment should deliver, particularly in Canada and the UK. The research has not examined whether streamlining has had implications for the effectiveness of impact assessment, but the causal link between streamlining and benefits does sound warning bells that merit further investigation. -- Highlights: • Investigation of the extent to which government has streamlined IA. • Evaluation framework was developed based on benefits of impact assessment. • Canada, South Africa, the United Kingdom, and Western Australia were examined. • Trajectory in last five years is attrition of benefits of impact assessment.

  16. Impact assessment: Eroding benefits through streamlining?

    International Nuclear Information System (INIS)

    Bond, Alan; Pope, Jenny; Morrison-Saunders, Angus; Retief, Francois; Gunn, Jill A.E.

    2014-01-01

    This paper argues that Governments have sought to streamline impact assessment in recent years (defined as the last five years) to counter concerns over the costs and potential for delays to economic development. We hypothesise that this has had some adverse consequences on the benefits that subsequently accrue from the assessments. This hypothesis is tested using a framework developed from arguments for the benefits brought by Environmental Impact Assessment made in 1982 in the face of the UK Government opposition to its implementation in a time of economic recession. The particular benefits investigated are ‘consistency and fairness’, ‘early warning’, ‘environment and development’, and ‘public involvement’. Canada, South Africa, the United Kingdom and Western Australia are the jurisdictions tested using this framework. The conclusions indicate that significant streamlining has been undertaken which has had direct adverse effects on some of the benefits that impact assessment should deliver, particularly in Canada and the UK. The research has not examined whether streamlining has had implications for the effectiveness of impact assessment, but the causal link between streamlining and benefits does sound warning bells that merit further investigation. -- Highlights: • Investigation of the extent to which government has streamlined IA. • Evaluation framework was developed based on benefits of impact assessment. • Canada, South Africa, the United Kingdom, and Western Australia were examined. • Trajectory in last five years is attrition of benefits of impact assessment

  17. Applicable international environmental impact assessment laws for ...

    African Journals Online (AJOL)

    Lawrence Hart

    1971-05-28

    May 28, 1971 ... appraise selected International Environmental laws and the Nigerian Environmental Impact Assessment methodology ... maze of pipelines, delivery lines, flow lines, canals and .... Toxic Materials and international waterways.

  18. Integrating Ecosystem Services Into Health Impact Assessment

    Science.gov (United States)

    Health Impact Assessment (HIA) provides a methodology for incorporating considerations of public health into planning and decision-making processes. HIA promotes interdisciplinary action, stakeholder participation, and timeliness and takes into account equity, sustainability, and...

  19. Evaluating the effectiveness of impact assessment instruments

    DEFF Research Database (Denmark)

    Cashmore, Matthew; Richardson, Tim; Hilding-Ryedvik, Tuija

    2010-01-01

    to sharpen effectiveness evaluation theory for impact assessment instruments this article critically examines the neglected issue of their political constitution. Analytical examples are used to concretely explore the nature and significance of the politicisation of impact assessment. It is argued......The central role of impact assessment instruments globally in policy integration initiatives has been cemented in recent years. Associated with this trend, but also reflecting political emphasis on greater accountability in certain policy sectors and a renewed focus on economic competitiveness...... that raising awareness about the political character of impact assessment instruments, in itself, is a vital step in advancing effectiveness evaluation theory. Broader theoretical lessons on the framing of evaluation research are also drawn from the political analysis. We conclude that, at least within...

  20. Assessing the Impacts of Agricultural Biotechnologies

    International Development Research Centre (IDRC) Digital Library (Canada)

    The group has completed studies of applications in livestock production and .... into the design and application of impact assessment tools from the outset. ...... Corn producers in the United States, who supply the manufacturers of fructose. 4.

  1. Ecological risk assessment as a framework for environmental impact assessments

    CSIR Research Space (South Africa)

    Claassen, Marius

    1999-01-01

    Full Text Available Environmental impact assessments in South Africa are usually conducted according to the integrated environmental management (IEM) procedure. The preliminary investigation reported here, indicated that most of the ecological requirements specified...

  2. Introduction: The effectiveness of impact assessment instruments

    OpenAIRE

    Cashmore, M; Bond, A; Sadler, B

    2009-01-01

    The global application of impact assessment instruments to achieve a variety of policy integration goals (e.g. the mainstreaming of environmental, gender or economic efficiency concerns) continues to proliferate. These instruments represent important components of contemporary political governance and hence are an important locus for applied research. This special issue of Impact Assessment and Project Appraisal critically examines 'state-of-the-art' knowledge and understanding of the effecti...

  3. Health Impact Assessment: Linking Public Health to ...

    Science.gov (United States)

    The goal of this presentation is to explore how HIA can help inform hazardous waste permitting regulations and incorporate community vulnerability and cumulative impacts to their potential health risks into permitting decision making by the California Department of Toxic Substances Control. Presented the Health Impact Assessment (HIA) at the State of California Cumulative Impacts and Community Vulnerability Symposium on July 27 in Diamond Bar, CA.

  4. Life Cycle Thinking in Impact Assessment

    DEFF Research Database (Denmark)

    Bidstrup, Morten

    2015-01-01

    It has been advocated that life cycle thinking (LCT) should be applied in impact assessment (IA) to a greater extent, since some development proposals pose a risk of significant impacts throughout the interconnected activities of product systems. Multiple authors have proposed the usage of life...

  5. Road ecology in environmental impact assessment

    International Nuclear Information System (INIS)

    Karlson, Mårten; Mörtberg, Ulla; Balfors, Berit

    2014-01-01

    Transport infrastructure has a wide array of effects on terrestrial and aquatic ecosystems, and road and railway networks are increasingly being associated with a loss of biodiversity worldwide. Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) are two legal frameworks that concern physical planning, with the potential to identify, predict, mitigate and/or compensate transport infrastructure effects with negative impacts on biodiversity. The aim of this study was to review the treatment of ecological impacts in environmental assessment of transport infrastructure plans and projects. A literature review on the topic of EIA, SEA, biodiversity and transport infrastructure was conducted, and 17 problem categories on the treatment of biodiversity were formulated by means of a content analysis. A review of environmental impact statements and environmental reports (EIS/ER) produced between 2005 and 2013 in Sweden and the UK was then conducted using the list of problems as a checklist. The results show that the treatment of ecological impacts has improved substantially over the years, but that some impacts remain problematic; the treatment of fragmentation, the absence of quantitative analysis and that the impact assessment study area was in general delimited without consideration for the scales of ecological processes. Actions to improve the treatment of ecological impacts could include improved guidelines for spatial and temporal delimitation, and the establishment of a quantitative framework including tools, methods and threshold values. Additionally, capacity building and further method development of EIA and SEA friendly spatial ecological models can aid in clarifying the costs as well as the benefits in development/biodiversity tradeoffs. - Highlights: • The treatment of ecological impacts in EIA and SEA has improved. • Quantitative methods for ecological impact assessment were rarely used • Fragmentation effects were recognized

  6. Road ecology in environmental impact assessment

    Energy Technology Data Exchange (ETDEWEB)

    Karlson, Mårten, E-mail: mkarlso@kth.se; Mörtberg, Ulla, E-mail: mortberg@kth.se; Balfors, Berit, E-mail: balfors@kth.se

    2014-09-15

    Transport infrastructure has a wide array of effects on terrestrial and aquatic ecosystems, and road and railway networks are increasingly being associated with a loss of biodiversity worldwide. Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) are two legal frameworks that concern physical planning, with the potential to identify, predict, mitigate and/or compensate transport infrastructure effects with negative impacts on biodiversity. The aim of this study was to review the treatment of ecological impacts in environmental assessment of transport infrastructure plans and projects. A literature review on the topic of EIA, SEA, biodiversity and transport infrastructure was conducted, and 17 problem categories on the treatment of biodiversity were formulated by means of a content analysis. A review of environmental impact statements and environmental reports (EIS/ER) produced between 2005 and 2013 in Sweden and the UK was then conducted using the list of problems as a checklist. The results show that the treatment of ecological impacts has improved substantially over the years, but that some impacts remain problematic; the treatment of fragmentation, the absence of quantitative analysis and that the impact assessment study area was in general delimited without consideration for the scales of ecological processes. Actions to improve the treatment of ecological impacts could include improved guidelines for spatial and temporal delimitation, and the establishment of a quantitative framework including tools, methods and threshold values. Additionally, capacity building and further method development of EIA and SEA friendly spatial ecological models can aid in clarifying the costs as well as the benefits in development/biodiversity tradeoffs. - Highlights: • The treatment of ecological impacts in EIA and SEA has improved. • Quantitative methods for ecological impact assessment were rarely used • Fragmentation effects were recognized

  7. Cumulative Impact Assessment: Approaching Environmental Capacity in Development Area Using Environmental Impact Assessment Information

    Science.gov (United States)

    Cho, N.; Lee, M. J.; Maeng, J. H.

    2017-12-01

    Environmental impact assessment estimates the impact of development as a business unit and establishes mitigation plan. If the development is done, its economic effects can spread to the nearby areas. So that various developments can be distributed at different time intervals. The impact of the new developments can be combined with existing environmental impacts and can have a larger impact. That is, Cumulative impact assessment is needed to consider the environmental capacity of the Nearby area. Cumulative impact assessments require policy tools such as environmental impact assessment information and cumulative impact estimation models. In Korea, environmental information (water quality, air quality, etc.) of the development site is measured for environmental impact assessment and monitored for a certain period (generally 5 years) after the project. In addition, by constructing the environmental information as a spatial database, it is possible to express the environmental impact on a regional basis spatially and to intuitively use it for development site selection. Utilizing a composite model of environmental impact assessment information and Remote Sensing data for cumulative impact estimation, That can be used as a policy decision support tool that provides quantitative information for development area management, such as time series effect and sprawl phenomenon.

  8. Transboundary Environmental Impact Assessment : An Introduction

    NARCIS (Netherlands)

    Bastmeijer, C.J.; Koivurova, T.; Bastmeijer, K.; Koivurova, T.

    2008-01-01

    Environmental Impact Assessment (EIA) is a well-established instrument of environmental law and policy that aims to ensure that potential adverse environmental effects of human activities are assessed before decisions on such activities are made. The instrument is increasingly being applied in

  9. Radiological impact assessment within the IAEA Arctic Assessment Project (IASAP)

    DEFF Research Database (Denmark)

    Scott, E.M.; Gurbutt, P.; Harmes, I.

    1998-01-01

    As part of the International Arctic Seas Assessment Project (IASAP) of IAEA, a working group was created to model the dispersal and transfer of radionuclides released from radioactive waste disposed of in the Kara Sea and bays of Novaya Zemlya and to assess the radiological impact. Existing models...

  10. Impact assessment of ionising radiation in wildlife

    International Nuclear Information System (INIS)

    2001-01-01

    This R and D project was commissioned by the Environment Agency and English Nature in January 2001 to provide up-to-date information on ionising radiation impact to wildlife, upon which a robust assessment approach may be developed. The methodology will provide an interim approach, whilst awaiting the outcome of the European Commission funded project 'Framework for Assessment of Environmental Impact' (FASSET) due to end in October 2003. The aims of the report were: to summarise the latest research on the behaviour, transfer and impact of ionising radiation effects on wildlife; to outline and review relevant European Directives which have impacted on the requirements to assess the impact to wildlife from ionising radiation in the UK; to consider the role of regulatory bodies in assessing the impact of ionising radiation on wildlife with respect to England and Wales; to make recommendations on the relative biological effectiveness of different types of radiation with respect to wildlife; and to recommend an approach with which to assess the 'scale of risk' to wildlife from the effects of ionising radiation, with spreadsheets to support the methodology. The report describes the behaviour and transfer of radionuclides in a number of different ecosystem types. Particular emphasis is placed on those ecosystems most likely to be impacted by the authorised discharges of radioactivity within the UK. As there is no international consensus on the approach to be taken to assess the impact of ionising radiation on wildlife, some countries have adopted their own legislation. The report evaluates these regulatory frameworks and describe the current UK position

  11. IMPACT ASSESSMENT OF STRUCTURAL FLOOD MITIGATION MEASURES

    Directory of Open Access Journals (Sweden)

    ZVIJAKOVA LENKA

    2015-03-01

    Full Text Available The objective of the paper is to propose a methodology for assessing water constructions, which will allow impact assessment of water constructions on the environment and hence select the best option for the permission process. The result is “Guideline for environmental impact assessment of flood protection object”, which uses the method of UMRA (universal matrix of risk analysis, which is one of the methods of risk analysis proposed not only to enhance the transparency and sensitivity of the evaluation process, but also to cope with the requirements of the EIA system in the Slovakia and Europe Union.

  12. Social impact assessment in energy projects

    International Nuclear Information System (INIS)

    Koivujaervi, S.; Kantola, I.; Maekinen, P.

    1998-01-01

    The research report is based on literature and interviews on the social impact assessment (SIA) in energy projects in Finland, both before and after the EIA Act has been in force in Finland. The concept and content of SIA, the requirements set by the legislation, its relation with other environmental impacts, the assessment process and the used methods have been studied on the basis of the literature analysis. A total of 26 persons representing the coordination authorities, persons issuing statements, researchers, civil servants, consultants and project developers were interviewed for the research. The interviews were made by the University of Turku in the form of theme interviews, investigating the present status, practices and expectations of the SIA. The unestablished status was seen to be the problem in the SIA, which was reflected in the interviewers' varying views about the content of the SIA. Among the operators, the general character of the SIA criticism in the statements concerning the assessment programmes or reports was seen as a problem as well; the assessment of social impact has been considered to be insufficient, however, without any identification of the effects or how the effects should have been assessed. For the time preceding the EIA Act, the assessment of the social impact of hydraulic work, power plant and transmission line projects and the project of the fifth nuclear power plant have been studied. As to the power plant and transmission line projects after the validity of the EIA Act, all the 20 projects were gone through which had progressed during the spring 1998 at least to the assessment report stage. Of these projects, the assessment of the social impact of one transmission line and one power plant project was studied in detail. The report also studies the assessment of the social impact of the repository for nuclear waste on the basis of the experience gained in Finland and in other countries. On the basis of the literature study

  13. Land Use in LCIA: an absolute scale proposal for Biotic Production Potential

    DEFF Research Database (Denmark)

    Saez de Bikuna Salinas, Koldo; Ibrom, Andreas; Hauschild, Michael Zwicky

    , the present study proposes a single absolute scale for the midpoint impact category (MIC) of Biotic Production Potential (BPP). It is hypothesized that, for an ecosystem in equilibrium (where NPP equals decay), such an ecosystem has reached the maximum biotic throughput subject to site-specific conditions...... and no externally added inputs. The original ecosystem (or Potential Natural Vegetation) of a certain land gives then the maximum BPP with no additional, downstream or upstream, impacts. This Natural BPP is proposed as the maximum BPP in a hypothetical Absolute Scale for LCA’s Land Use framework. It is argued...... that this maximum BPP is Nature’s optimal solution through evolution-adaptation mechanisms, which provides the maximum matter throughput subject to the rest of environmental constraints (without further impacts). As a consequence, this scale rises a Land Use Optimality Point that suggests the existence of a limit...

  14. Pursuing an ecological component for the Effect Factor in LCIA methods

    DEFF Research Database (Denmark)

    Cosme, Nuno Miguel Dias; Bjørn, Anders; Rosenbaum, Ralph K.

    have also been altered by past impacts. Model frameworks are usually built on stability, linearity of causality and expectation of a safe return to stable states if the stressor is minimised. However, the command-and-control paradigm has resulted in the erosion of natural resources and species...... EC50-based) or 1 (assuming that continuous stress affects reproduction rate), but these are all based on biological/physiological responses and do not add a true ecological component to the impact. Such factor simply changes the HC50 by 1 or 0.3 log units. A stressor with equal intensity in two...

  15. Assessment of psychosocial impact of dental aesthetics.

    Science.gov (United States)

    Khan, Munizeh; Fida, Mubassar

    2008-09-01

    To assess the psychosocial impact of dental aesthetics using the 'Psychosocial Impact of Dental Aesthetics Questionnaire' (PIDAQ) and self-rated Aesthetic Component (AC) of the Index of Orthodontic Treatment Need (IOTN). Cross-sectional study. Dental Section, the Aga Khan University Hospital, Karachi, from August to September 2006. Adults with no prior orthodontic treatment were asked to complete a modified version of the 'Psychosocial Impact of Dental Aesthetics Questionnaire' (PIDAQ). A total of four variables including 'Dental Self-confidence', 'Social impact', 'Psychological impact' and 'Perceived orthodontic treatment need' were assessed by a series of statements, whereas dental aesthetics were assessed by the respondents using the IOTN Aesthetic Component (self-rated IOTN-AC). Kruskal-Walli's test was applied to determine significance. The respondents were 120 adults (70 females and 50 males; mean age 25.8 years), all four of the above-mentioned variables measuring psychosocial impact showed positive and significant correlations with the perceived severity of malocclusion as depicted by the Aesthetic Component (AC) of Index of Orthodontic Treatment Need (IOTN), with p-value of less than 0.01 for all variables. The results indicate the strong psychosocial impact of altered dental aesthetics on the emotional state of an individual. The association between self-rated IOTN-AC grading with psychosocial well-being stands established, indicating that the perceived aesthetics of malocclusion may be as significant a factor in determining treatment need as the degree of malocclusion.

  16. Life cycle assessment (LCA of lead-free solders from the environmental protection aspect

    Directory of Open Access Journals (Sweden)

    Mitovski Aleksandra M.

    2009-01-01

    Full Text Available Life-cycle assessment (LCA presents a relatively new approach, which allows comprehensive environmental consequences analysis of a product system over its entire life. This analysis is increasingly being used in the industry, as a tool for investigation of the influence of the product system on the environment, and serves as a protection and prevention tool in ecological management. This method is used to predict possible influences of a certain material to the environment through different development stages of the material. In LCA, the product systems are evaluated on a functionally equivalent basis, which, in this case, was 1000 cubic centimeters of an alloy. Two of the LCA phases, life-cycle inventory (LCA and life-cycle impact assessment (LCIA, are needed to calculate the environmental impacts. Methodology of LCIA applied in this analysis aligns every input and output influence into 16 different categories, divided in two subcategories. The life-cycle assessment reaserch review of the leadfree solders Sn-Cu, SAC (Sn-Ag-Cu, BSA (Bi-Sb-Ag and SABC (Sn-Ag-Bi-Cu respectively, is given in this paper, from the environmental protection aspect starting from production, through application process and finally, reclamation at the end-of-life, i.e. recycling. There are several opportunities for reducing the overall environmental and human health impacts of solder used in electronics manufacturing based on the results of the LCA, such as: using secondary metals reclaimed through post-industrial recycling; power consumption reducing by replacing older, less efficient reflow assembly equipment, or by optimizing the current equipment to perform at the elevated temperatures required for lead-free soldering, etc. The LCA analysis was done comparatively in relation to widely used Sn-Pb solder material. Additionally, the impact factors of material consumption, energy use, water and air reserves, human health and ecotoxicity have been ALSO considered including

  17. Regional analysis and environmental impact assessment

    International Nuclear Information System (INIS)

    Parzyck, D.C.; Brocksen, R.W.; Emanuel, W.R.

    1976-01-01

    This paper presents a number of techniques that can be used to assess environmental impacts on a regional scale. Regional methodologies have been developed which examine impacts upon aquatic and terrestrial biota in regions through consideration of changes in land use, land cover, air quality, water resource use, and water quality. Techniques used to assess long-range atmospheric transport, water resources, effects on sensitive forest and animal species, and impacts on man are presented in this paper, along with an optimization approach which serves to integrate the analytical techniques in an overall assessment framework. A brief review of the research approach and certain modeling techniques used within one regional studies program is provided. While it is not an all inclusive report on regional analyses, it does present an illustration of the types of analyses that can be performed on a regional scale

  18. Underwater noise modelling for environmental impact assessment

    Energy Technology Data Exchange (ETDEWEB)

    Farcas, Adrian [Centre for Environment, Fisheries and Aquaculture Science (Cefas), Pakefield Road, Lowestoft, NR33 0HT (United Kingdom); Thompson, Paul M. [Lighthouse Field Station, Institute of Biological and Environmental Sciences, University of Aberdeen, Cromarty IV11 8YL (United Kingdom); Merchant, Nathan D., E-mail: nathan.merchant@cefas.co.uk [Centre for Environment, Fisheries and Aquaculture Science (Cefas), Pakefield Road, Lowestoft, NR33 0HT (United Kingdom)

    2016-02-15

    Assessment of underwater noise is increasingly required by regulators of development projects in marine and freshwater habitats, and noise pollution can be a constraining factor in the consenting process. Noise levels arising from the proposed activity are modelled and the potential impact on species of interest within the affected area is then evaluated. Although there is considerable uncertainty in the relationship between noise levels and impacts on aquatic species, the science underlying noise modelling is well understood. Nevertheless, many environmental impact assessments (EIAs) do not reflect best practice, and stakeholders and decision makers in the EIA process are often unfamiliar with the concepts and terminology that are integral to interpreting noise exposure predictions. In this paper, we review the process of underwater noise modelling and explore the factors affecting predictions of noise exposure. Finally, we illustrate the consequences of errors and uncertainties in noise modelling, and discuss future research needs to reduce uncertainty in noise assessments.

  19. Underwater noise modelling for environmental impact assessment

    International Nuclear Information System (INIS)

    Farcas, Adrian; Thompson, Paul M.; Merchant, Nathan D.

    2016-01-01

    Assessment of underwater noise is increasingly required by regulators of development projects in marine and freshwater habitats, and noise pollution can be a constraining factor in the consenting process. Noise levels arising from the proposed activity are modelled and the potential impact on species of interest within the affected area is then evaluated. Although there is considerable uncertainty in the relationship between noise levels and impacts on aquatic species, the science underlying noise modelling is well understood. Nevertheless, many environmental impact assessments (EIAs) do not reflect best practice, and stakeholders and decision makers in the EIA process are often unfamiliar with the concepts and terminology that are integral to interpreting noise exposure predictions. In this paper, we review the process of underwater noise modelling and explore the factors affecting predictions of noise exposure. Finally, we illustrate the consequences of errors and uncertainties in noise modelling, and discuss future research needs to reduce uncertainty in noise assessments.

  20. The relation of risk assessment and health impact assessment

    DEFF Research Database (Denmark)

    Ádám, Balázs; Gulis, Gabriel

    2013-01-01

    than assessing a present situation. As part of this process, however, methods applied in risk assessment are used. Risk assessment typically characterises relation of a well-defined risk factor to a well-defined health outcome. Within HIA usually several individual risk assessments are needed...... of the causal chain from the proposal through related health determinants and risk factors to health outcomes. The stepwise analysis, systematic prioritization and consideration of horizontal interactions between the causal pathways make it feasible to use widely recognized risk assessment methods in the HIA......The level and distribution of health risks in a society is substantially influenced by measures of various policies, programmes or projects. Risk assessment can evaluate the nature, likelihood and severity of an adverse effect. Health impact assessment (HIA) provides similar function when used...

  1. Case Study Report about Gender Impact Assessment

    DEFF Research Database (Denmark)

    Faber, Stine Thidemann; Agustin, Lise Rolandsen

    2013-01-01

    The aim of this national case study report is to take a closer look at the use of Gender Impact Assessments in Denmark in order to describe the Danish implementation of this specific Gender Mainstreaming method. By way of analyzing two selected cases (two law proposals put forward by The Danish...... Ministry of Employment and the Danish Ministry of Transport, respectively) the aim is to assess the transformative potential of GIA as it is performed in Denmark....

  2. Area of Concern: A new paradigm in life cycle assessment for the development of footprint metrics

    DEFF Research Database (Denmark)

    Ridoutt, Bradley G.; Pfister, Stephan; Manzardo, Alessandro

    2016-01-01

    As a class of environmental metrics, footprints have been poorly defined, have shared an unclear relationship to life cycle assessment (LCA), and the variety of approaches to quantification have sometimes resulted in confusing and contradictory messages in the marketplace. In response, a task force...... operating under the auspices of the UNEP/SETAC Life Cycle Initiative project on environmental life cycle impact assessment (LCIA) has been working to develop generic guidance for developers of footprint metrics. The purpose of this paper is to introduce a universal footprint definition and related...... terminology as well as to discuss modelling implications. The task force has worked from the perspective that footprints should be based on LCA methodology, underpinned by the same data systems and models as used in LCA. However, there are important differences in purpose and orientation relative to LCA...

  3. Let us make impact assessment more accessible

    International Nuclear Information System (INIS)

    Alton, Charles C.; Underwood, P. Benjamin

    2003-01-01

    Impact assessment professionals have traditionally written documents for themselves. Often, their work appears to be received with indifference by business professionals and decision makers who have different needs and interests. The two groups conflict when they should be thinking and planning together at the 'big picture' level (including the understanding of the social factors at work in environmental impact assessment) and developing related and workable 'site-specific' implementation that characterizes socially acceptable decision making. To achieve this goal, the IA professional needs to rethink the approach. IA professionals often focus on the traditional 'physical' environment, confining the assessment to facts and figures about hard aspects of the environment. Reams of detailed data are compiled to demonstrate impact assessment and to achieve a degree of certainty and precision. However, the sheer bulk of data assures that it will not be read by those who most need to use it. The IA professional must learn to prepare assessments that effectively consider less quantifiable, 'softer' aspects of the environment. We advocate preparation of an impact analysis that management decision makers and environmental stewards can use as a reference tool. The goal is to reduce or eliminate the hundreds of unread pages containing lengthy modeling runs and obscure details, and instead to prepare documents that are useful in both courtroom and boardroom. This convenient and quick-study 'consumer report' style combines with a tiered decision making process that assures broad long-term thinking and planning, and focused short-term detailed implementation, using a level of detail appropriate to the decision at hand. This methodology integrates social factors into decision making, so as to provide meaningful discussion and analysis. These principles, which have been proven in US boardrooms and courtrooms, will be illustrated with actual examples from broad policy-level impact

  4. Impact assessment of land use policies: Introduction

    NARCIS (Netherlands)

    Bezlepkina, I.; Brouwer, F.M.; Reidsma, P.

    2014-01-01

    This special issue is built around a series of impact assessments of land use policies and sustainable development in developing countries, carried out in the EU-funded project LUPIS (Sixth framework programme, Global Change and Ecosystems, Contract 36955). The project targeted at the development

  5. Assessing Environmental Impact on Aquatic Macrophyte Species ...

    African Journals Online (AJOL)

    Impact of environmental variables on distribution and composition of aquatic macrophyte community in a tropical river was assessed for one year (March 2009 to February 2010). Hypothesis tested was that the spatial variation in environmental variables on the river's longitudinal gradient affects macrophyte species ...

  6. A Methodology for Safety Culture Impact Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Han, Kiyoon; Jae, Moosung [Hanyang Univ., Seoul (Korea, Republic of)

    2014-05-15

    The purpose of this study is to develop methodology for assessing safety culture impact on nuclear power plants. A new methodology for assessing safety culture impact index has been developed and applied for the reference nuclear power plants. The developed SCII model might contribute to comparing the level of safety culture among nuclear power plants as well as to improving the safety of nuclear power plants. Safety culture is defined to be fundamental attitudes and behaviors of the plant staff which demonstrate that nuclear safety is the most important consideration in all activities conducted in nuclear power operation. Through several accidents of nuclear power plant including the Fukusima Daiichi in 2011 and Chernovyl accidents in 1986, the safety of nuclear power plant is emerging into a matter of interest. From the accident review report, it can be easily found out that safety culture is important and one of dominant contributors to accidents. However, the impact methodology for assessing safety culture has not been established analytically yet. It is difficult to develop the methodology for assessing safety culture impact quantitatively.

  7. A Methodology for Safety Culture Impact Assessment

    International Nuclear Information System (INIS)

    Han, Kiyoon; Jae, Moosung

    2014-01-01

    The purpose of this study is to develop methodology for assessing safety culture impact on nuclear power plants. A new methodology for assessing safety culture impact index has been developed and applied for the reference nuclear power plants. The developed SCII model might contribute to comparing the level of safety culture among nuclear power plants as well as to improving the safety of nuclear power plants. Safety culture is defined to be fundamental attitudes and behaviors of the plant staff which demonstrate that nuclear safety is the most important consideration in all activities conducted in nuclear power operation. Through several accidents of nuclear power plant including the Fukusima Daiichi in 2011 and Chernovyl accidents in 1986, the safety of nuclear power plant is emerging into a matter of interest. From the accident review report, it can be easily found out that safety culture is important and one of dominant contributors to accidents. However, the impact methodology for assessing safety culture has not been established analytically yet. It is difficult to develop the methodology for assessing safety culture impact quantitatively

  8. Methods of Environmental Impact Assessment in Colombia

    Directory of Open Access Journals (Sweden)

    Javier Toro Calderón

    2013-10-01

    Full Text Available The Environmental Impact Assessment (EIA in Colombia constitutes the primary tool for making decisions with respect to projects, works and activities (PWA with potential for significant environmental impacts. In the case of the infrastructure of the PWA, the EIA is mandatory and determines the environmental license (EL for construction and operation. This paper analyzes the methods used to assess the environmental impact of the PWA that have applied for licenses with the Ministry of Environment and Sustainable Development. It was found that the method most frequently used is the qualitative proposal by Conesa, with modifications that reduce the effectiveness of the EIA and favor the subjectivity and bias of the evaluator. Finally a series of recom­mendations to improve the process in the country are proposed.

  9. The value of environmental impact assessments

    International Nuclear Information System (INIS)

    Sohocki, D.D.

    1996-01-01

    The environment and the economy are inextricably linked. Today the environmental, economic, and social associated with project and program decisions are at times of such a magnitude and duration that they exceed our ability to understand, let alone mitigate them. Energy production, distribution, pricing, policies, end uses, and externalities demonstrate the need for wise planning and informed decision making. International cooperation, based upon mutually shared respect, responsibility, and innovative solutions is an essential component of addressing contemporary issues, impacts, and opportunities. Both egypt and the united states have laws requiring environmental impact assessments. Just as egypt can learn from our successes and failures in the environmental impact assessment field over the past 36 years, the united states and other nations can learn as egypt develops and innovates its own approaches and solutions

  10. Applying social impact assessment to nursing research.

    Science.gov (United States)

    Bradbury-Jones, Caroline; Taylor, Julie

    2014-08-05

    Many nurses need to construct a research proposal at some stage of their career and there are multiple texts that provide guidance on doing so. However, most texts do not provide explicit guidance on the issue of social impact--the effect of research on the social health and wellbeing of individuals, families and communities and on the improved performance of relevant services. This article proposes that social impact should be considered from the beginning of a research project. It outlines a framework for assessing social impact to help strengthen the quality of research proposals and assist nurses constructing the proposal and also those evaluating it, including academic assessors or funding body reviewers. Nursing research should be useful and should have a positive effect on practice. Focusing on social impact can increase the chances of this desirable outcome.

  11. Impact assessment of agricultural innovations: a review

    Directory of Open Access Journals (Sweden)

    Juan Carlos Barrientos-Fuentes

    2013-04-01

    Full Text Available The current conditions of the markets and favorable policies, as well as the progress of science and communications, are promoting further development and diffusion of agricultural innovations, which have effects on different areas of agrarian development. The objective of this paper is to present a review of characteristics of agricultural innovations and their diffusion, adoption and impacts, as well as an update of the types and methods of assessment. Agricultural innovations are not only new or improved products, they are also models and systems, and should have a positive social effect. Innovation areas in developing countries are more concentrated on production and distribution, whereas developed countries concentrate on offering inputs. Investments from the private sector in agricultural innovations are growing faster than those from the public sector. The adoption of innovations is medium-term, and usually less than 100%. The impact of innovations includes intermediate areas, such as institutional, political, scientific and productive areas. The economic efficiency of the investment in innovations is the most often mentioned purpose of impact assessments in the literature. The efficiency analysis (ex-post and its surplus approach is still the most used method for assessing impact of agricultural innovations. Nevertheless, other goals are becoming more important, such as food security, environmental protection and poverty reduction. Livelihood, comprehensive and multidimensional approaches go beyond the economic approach. Moreover, specific models with advantages of prognosis and improved precision are replacing or complementing the classic socio-economic approach

  12. Impact Hazard Assessment for 2011 AG5

    Science.gov (United States)

    Chesley, Steven R.; Bhaskaran, S.; Chodas, P. W.; Grebow, D.; Landau, D.; Petropoulos, A. E.; Sims, J. A.; Yeomans, D. K.

    2012-10-01

    2011 AG5 is a Potentially Hazardous Asteroid roughly 140 m in diameter. The current orbit determination, based on 213 optical measurements from 2010-Nov-08.6 to 2011-Sep-21.4, allows for the possibility of an Earth impact on 2040-Feb-05.2 with probability 0.2%. The 2040 potential impact is a 17:10 resonant return from a 2023 Earth encounter, where if the asteroid passes through a 365 km keyhole, it will go on to impact in 2040. We discuss the critical points on the decision tree for averting this potential impact. The decision to proceed with a deflection mission should not be made prematurely, when there is still a chance for eliminating the impact hazard through observations rather than intervention, and yet the decision must not be delayed past the point where it is no longer feasible to achieve a deflection. Thus the decision tree is informed by the evolution of the asteroid’s orbital uncertainty and by the available mission scenarios. We approach the orbital prediction problem by assessing the expected future evolution of the orbital uncertainty at the 2040 encounter based on various observational scenarios. We find that observations made at the next favorable apparition in 2013 are 95% likely to eliminate the possibility of a 2040 impact altogether. With the addition of 2015-16 observations, this likelihood increases to about 99%. Conversely, if the asteroid turns out to really be on an Earth impacting trajectory, the 2013 observations could raise the chance of impact to 10-15%, and observations in 2015-2016 could raise the chance of impact to 70%. On the deflection side, we describe a range of viable kinetic deflection mission scenarios. Mission timelines allow detailed planning to be delayed until after the 2013 observations and spacecraft fabrication to be delayed until after the 2015-16 observations. The full report is available at http://neo.jpl.nasa.gov/news/news175.html.

  13. Roles of social impact assessment practitioners

    International Nuclear Information System (INIS)

    Wong, Cecilia H.M.; Ho, Wing-chung

    2015-01-01

    The effectiveness of social impact assessment (SIA) hinges largely on the capabilities and ethics of the practitioners, yet few studies have dedicated to discuss the expectations for these professionals. Recognising this knowledge gap, we employed the systemic review approach to construct a framework of roles of SIA practitioners from literature. Our conceptual framework encompasses eleven roles, namely project manager of SIA, practitioner of SIA methodologies, social researcher, social strategy developer, social impact management consultant, community developer, visionary, public involvement specialist, coordinator, SIA researcher, and educator. Although these roles have been stratified into three overarching categories, the project, community and SIA development, they are indeed interrelated and should be examined together. The significance of this study is threefold. First, it pioneers the study of the roles of SIA practitioners in a focused and systematic manner. Second, it informs practitioners of the expectations of them thereby fostering professionalism. Third, it prepares the public for SIAs by elucidating the functions and values of the assessment. - Highlights: • We adopt systematic review to construct a framework of roles of social impact assessment (SIA) practitioners from literature. • We use three overarching categorises to stratify the eleven roles we proposed. • This work is a novel attempt to study the work as a SIA practitioner and build a foundation for further exploration. • The framework informs practitioners of the expectations on them thus reinforcing professionalism. • The framework also prepares the public for SIAs by elucidating the functions and values of the assessment

  14. Roles of social impact assessment practitioners

    Energy Technology Data Exchange (ETDEWEB)

    Wong, Cecilia H.M., E-mail: ceciliawonghm@gmail.com; Ho, Wing-chung, E-mail: wingcho@cityu.edu.hk

    2015-01-15

    The effectiveness of social impact assessment (SIA) hinges largely on the capabilities and ethics of the practitioners, yet few studies have dedicated to discuss the expectations for these professionals. Recognising this knowledge gap, we employed the systemic review approach to construct a framework of roles of SIA practitioners from literature. Our conceptual framework encompasses eleven roles, namely project manager of SIA, practitioner of SIA methodologies, social researcher, social strategy developer, social impact management consultant, community developer, visionary, public involvement specialist, coordinator, SIA researcher, and educator. Although these roles have been stratified into three overarching categories, the project, community and SIA development, they are indeed interrelated and should be examined together. The significance of this study is threefold. First, it pioneers the study of the roles of SIA practitioners in a focused and systematic manner. Second, it informs practitioners of the expectations of them thereby fostering professionalism. Third, it prepares the public for SIAs by elucidating the functions and values of the assessment. - Highlights: • We adopt systematic review to construct a framework of roles of social impact assessment (SIA) practitioners from literature. • We use three overarching categorises to stratify the eleven roles we proposed. • This work is a novel attempt to study the work as a SIA practitioner and build a foundation for further exploration. • The framework informs practitioners of the expectations on them thus reinforcing professionalism. • The framework also prepares the public for SIAs by elucidating the functions and values of the assessment.

  15. Assessing the impact of aviation on climate

    Directory of Open Access Journals (Sweden)

    Karen Marais

    2008-04-01

    Full Text Available We present an assessment of the marginal climate impacts of new aviation activities. We use impulse response functions derived from carbon-cycle and atmospheric models to estimate changes in surface temperature for various aviation impacts (CO2, NOx on methane, NOx on ozone, sulfates, soot, and contrails/induced cirrus. We use different damage functions and discount rates to explore health, welfare and ecological costs for a range of assumptions and scenarios. Since uncertainty is high regarding many aviation effects, we explicitly capture some uncertainty by representing several model parameters as probabilistic distributions. The uncertainties are then propagated using Monte Carlo analysis to derive estimates for the impact of these uncertainties on the marginal future climate impacts. Our goal is to provide a framework that will communicate the potential impacts of aviation on climate change under different scenarios and assumptions, and that will allow decision-makers to compare these potential impacts to other aviation environmental impacts. We present results to describe the influence of parametric uncertainties, scenarios, and assumptions for valuation on the expected marginal future costs of aviation impacts. Estimates of the change in global average surface temperature due to aviation are most sensitive to changes in climate sensitivity, the radiative forcing attributed to short-lived effects (in particular those related to contrails and aviation-induced cirrus, and the choice of emissions scenario. Estimates of marginal future costs of aviation are most sensitive to assumptions regarding the discount rate, followed by assumptions regarding climate sensitivity, and the choice of emissions scenario.

  16. Life cycle assessment of crystalline photovoltaics in the Swiss ecoinvent database

    Energy Technology Data Exchange (ETDEWEB)

    Jungbluth, Niels [ESU-services, Environmental Consultancy for Business and Authorities, Uster (Switzerland)

    2005-07-01

    This paper describes the life cycle assessment (LCA) for photovoltaic (PV) power plants in the new ecoinvent database. Twelve different, grid-connected photovoltaic systems were studied for the situation in Switzerland in the year 2000. They are manufactured as panels or laminates, from monocrystalline or polycrystalline silicon, installed on facades, slanted or flat roofs, and have 3 kW{sub p} capacity. The process data include quartz reduction, silicon purification, wafer, panel and laminate production, mounting structure, 30 years operation and dismantling. In contrast to existing LCA studies, country-specific electricity mixes have been considered in the life cycle inventory (LCI) in order to reflect the present market situation. The new approach for the allocation procedure in the inventory of silicon purification, as a critical issue of former studies, is discussed in detail. The LCI for photovoltaic electricity shows that each production stage is important for certain elementary flows. A life cycle impact assessment (LCIA) shows that there are important environmental impacts not directly related to the energy use (e.g., process emissions of NO{sub x} from wafer etching). The assumption for the used supply energy mixes is important for the overall LCIA results of different production stages. The presented life cycle inventories for photovoltaic power plants are representative for newly constructed plants and for the average photovoltaic mix in Switzerland in the year 2000. A scenario for a future technology (until 2010) helps to assess the relative influence of technology improvements for some processes. The very detailed ecoinvent database forms a good basis for similar studies in other European countries or for other types of solar cells. (Author)

  17. Social Impact Assessment : Guidance for assessing and managing the social impacts of projects

    NARCIS (Netherlands)

    Vanclay, Francis; Esteves, Ana Maria; Aucamp, Ilse; Franks, Daniel

    2015-01-01

    The purpose of this Guidance Note is to provide advice to various stakeholders about what is expected in good practice social impact assessment (SIA) and social impact management processes, especially in relation to project development. Project development refers to dams, mines, oil and gas

  18. Critical factors in environmental impact assessment

    International Nuclear Information System (INIS)

    Creasey, R.

    1999-01-01

    Environmental impact assessment (EIA) has shown that it is of proven benefit to the overall planning and environmental management of resource development projects, but certain elements within the application and practice of EIA remain problematic for proponents and regulatory decision makers alike. The use of the word 'critical' in the title of this paper suggests that if the components identified are not considered or implemented properly through the process of EIA, the product will be of less value to both the proponent and decision maker. In the context of EIA, the regulatory, financial, legal and social benefits that accrue make the need for good EIA practice even more imperative. A discussion is included that highlights a number of issues that need to be addressed to improve the effectiveness of EIA, a tool necessary to attaining provincial and federal regulatory approvals. To a large extent, the discussion reflects items of contemporary public concern, and those emerging issues of the scientific and regulatory community. At the same time, it needs to be realized that not all the identified items are necessarily new to the practice of impact assessment, but are nonetheless important to professional environmental impact assessment and decision making. Insight is also provided into the direction of decision making of the Energy and Utilities Board as it will affect the regulatory review and administration of resource development projects in the province of Alberta. 16 refs

  19. Environmental impact assessment of NPP decommissioning

    International Nuclear Information System (INIS)

    Hinca, R.

    2009-01-01

    In this presentation the following potential impacts of decommissioning of NPP are discussed: - Impacts on population; Impacts on natural environment; Land impacts; Impacts on urban complex and land utilisation; Possible impacts on area as a result of failure.

  20. Power station impacts: socio-economic impact assessment

    International Nuclear Information System (INIS)

    Glasson, John; Elson, Martin; Barrett, Brendan; Wee, D. Van der

    1987-01-01

    The aim of this study is to assess the local social and economic impacts of a proposed nuclear power station development at Hinkley Point in Somerset. The proposed development, Hinkley Point C, would be an addition to the existing Hinkley Point A Magnox station, commissioned in 1965, and the Hinkley Point B Advanced Gas Cooled Reactor (AGR) station, commissioned in 1976. It is hoped that the study will be of assistance to the CEGB, the Somerset County and District Councils and other agencies in their studies of the proposed development. In addition, the study seeks to apply and further develop the methodology and results from previous studies by the Power Station Impacts (PSI) team for predicting the social and economic effects of proposed power station developments on their localities. (author)

  1. Hurricane Sandy science plan: coastal impact assessments

    Science.gov (United States)

    Stronko, Jakob M.

    2013-01-01

    Hurricane Sandy devastated some of the most heavily populated eastern coastal areas of the Nation. With a storm surge peaking at more than 19 feet, the powerful landscape-altering destruction of Hurricane Sandy is a stark reminder of why the Nation must become more resilient to coastal hazards. In response to this natural disaster, the U.S. Geological Survey (USGS) received a total of $41.2 million in supplemental appropriations from the Department of the Interior (DOI) to support response, recovery, and rebuilding efforts. These funds support a science plan that will provide critical scientific information necessary to inform management decisions for recovery of coastal communities, and aid in preparation for future natural hazards. This science plan is designed to coordinate continuing USGS activities with stakeholders and other agencies to improve data collection and analysis that will guide recovery and restoration efforts. The science plan is split into five distinct themes: coastal topography and bathymetry, impacts to coastal beaches and barriers, impacts of storm surge, including disturbed estuarine and bay hydrology, impacts on environmental quality and persisting contaminant exposures, impacts to coastal ecosystems, habitats, and fish and wildlife. This fact sheet focuses assessing impacts to coastal beaches and barriers.

  2. Species for the screening assessment. Columbia River Comprehensive Impact Assessment

    International Nuclear Information System (INIS)

    Becker, J.M.; Brandt, C.A.; Dauble, D.D.; Maughan, A.D.; O'Neil, T.K.

    1996-03-01

    Because of past nuclear production operations along the Columbia River, there is intense public and tribal interest in assessing any residual Hanford Site related contamination along the river from the Hanford Reach to the Pacific Ocean. The Columbia River Comprehensive Impact Assessment was proposed to address these concerns. The assessment of the Columbia River is being conducted in phases. The initial phase is a screening assessment of the risk, which addresses current environmental conditions for a range of potential uses. One component of the screening assessment estimates the risk from contaminants in the Columbia River to the environment. The objective of the ecological risk assessment is to determine whether contaminants from the Columbia River pose a significant threat to selected receptor species that exist in the river and riparian communities of the study area. This report (1) identifies the receptor species selected for the screening assessment of ecological risk and (2) describes the selection process. The species selection process consisted of two tiers. In Tier 1, a master species list was developed that included many plant and animal species known to occur in the aquatic and riparian systems of the Columbia River between Priest Rapids Dam and the Columbia River estuary. This master list was reduced to 368 species that occur in the study area (Priest Rapids Dam to McNary Dam). In Tier 2, the 181 Tier 1 species were qualitatively ranked based on a scoring of their potential exposure and sensitivity to contaminants using a conceptual exposure model for the study area

  3. Species for the screening assessment. Columbia River Comprehensive Impact Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Becker, J.M.; Brandt, C.A.; Dauble, D.D.; Maughan, A.D.; O`Neil, T.K.

    1996-03-01

    Because of past nuclear production operations along the Columbia River, there is intense public and tribal interest in assessing any residual Hanford Site related contamination along the river from the Hanford Reach to the Pacific Ocean. The Columbia River Comprehensive Impact Assessment was proposed to address these concerns. The assessment of the Columbia River is being conducted in phases. The initial phase is a screening assessment of the risk, which addresses current environmental conditions for a range of potential uses. One component of the screening assessment estimates the risk from contaminants in the Columbia River to the environment. The objective of the ecological risk assessment is to determine whether contaminants from the Columbia River pose a significant threat to selected receptor species that exist in the river and riparian communities of the study area. This report (1) identifies the receptor species selected for the screening assessment of ecological risk and (2) describes the selection process. The species selection process consisted of two tiers. In Tier 1, a master species list was developed that included many plant and animal species known to occur in the aquatic and riparian systems of the Columbia River between Priest Rapids Dam and the Columbia River estuary. This master list was reduced to 368 species that occur in the study area (Priest Rapids Dam to McNary Dam). In Tier 2, the 181 Tier 1 species were qualitatively ranked based on a scoring of their potential exposure and sensitivity to contaminants using a conceptual exposure model for the study area.

  4. Experience and lessons from health impact assessment for human rights impact assessment.

    Science.gov (United States)

    Salcito, Kendyl; Utzinger, Jürg; Krieger, Gary R; Wielga, Mark; Singer, Burton H; Winkler, Mirko S; Weiss, Mitchell G

    2015-09-16

    As globalisation has opened remote parts of the world to foreign investment, global leaders at the United Nations and beyond have called on multinational companies to foresee and mitigate negative impacts on the communities surrounding their overseas operations. This movement towards corporate impact assessment began with a push for environmental and social inquiries. It has been followed by demands for more detailed assessments, including health and human rights. In the policy world the two have been joined as a right-to-health impact assessment. In the corporate world, the right-to-health approach fulfils neither managers' need to comprehensively understand impacts of a project, nor rightsholders' need to know that the full suite of their human rights will be safe from violation. Despite the limitations of a right-to-health tool for companies, integration of health into human rights provides numerous potential benefits to companies and the communities they affect. Here, a detailed health analysis through the human rights lens is carried out, drawing on a case study from the United Republic of Tanzania. This paper examines the positive and negative health and human rights impacts of a corporate operation in a low-income setting, as viewed through the human rights lens, considering observations on the added value of the approach. It explores the relationship between health impact assessment (HIA) and human rights impact assessment (HRIA). First, it considers the ways in which HIA, as a study directly concerned with human welfare, is a more appropriate guide than environmental or social impact assessment for evaluating human rights impacts. Second, it considers the contributions HRIA can make to HIA, by viewing determinants of health not as direct versus indirect, but as interrelated.

  5. 40 CFR 227.22 - Assessment of impact.

    Science.gov (United States)

    2010-07-01

    ... FOR THE EVALUATION OF PERMIT APPLICATIONS FOR OCEAN DUMPING OF MATERIALS Impact of the Proposed Dumping on Other Uses of the Ocean § 227.22 Assessment of impact. The assessment of impact on other uses... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Assessment of impact. 227.22 Section...

  6. Environmental Impact Assessment and Space Activities

    Science.gov (United States)

    Viikari, L.

    Environmental Impact Assessment (EIA) is a common tool for environment a l protection and management on Earth today, as prior assessment of the environmental consequences of planned activities. It is meant to provide the decision-makers with as comprehensive as possible information about the different environmental effects the proposed activity would entail, including alternative courses of action and the zero-alternative (i.e. the no action alternative). Additionally, plans for mitigation in respect of each alternative are to be outlined. The assessments take account of i.a. environmental impacts on ecosystems, diminution of aesthetic and scientific values, long-term or cumulative effects, as well as transfrontier implications. They also consider issues such as pollution control, environmental protection measures, reporting, post-project analysis, rehabilitation and so on. Also uncertainties in the assessment process are to be expressly presented. Most importantly, a common requirement also is that the results of the impact studies are presented in a way comprehensible to the g neral public,e too. Although the central aspect of the EIA is to provide the decision-makers with scientific information, the process also has other important implications. One of the most relevant of them is the involvement of those people potentially affected in some way by the proposed activity: most EIA systems require in some way the participation of the public, alongside with the relevant governmental authorities and other stake-holders. Such public involvement has various aims and goals: it may serve as a testimony to good governance in general, or be considered in more practical terms as improved planning, due to the concrete contribution of the public to the decision-making process. Obviously, it also is a tool for reducing conflict and developing wider support for the eventual decisions. In short, it enables the public to gain information about planned activities and influence

  7. Impact assessment as a design tool

    DEFF Research Database (Denmark)

    Lyhne, Ivar

    Research and development (R&D) programmes constitute a pivotal arena for shaping technologies of the future. In order to make qualified decisions, R&D programmes ought to be subject to impact assessment (IA). It seems, however, that only a few countries have developed a systematic practice. One r...... reason for the limited practice might be that IA of R&D policy is said to be particularly difficult. This paper reports on experiences from a voluntary IA application in Danish with point of departure in the question: How does IA work as a design tool in terms of R&D programmes?...

  8. Methodology for Environmental Impact Assessment; Metodik foer miljoekonsekvensbedoemning

    Energy Technology Data Exchange (ETDEWEB)

    Malmlund, Anna (Structor Miljoebyraan Stockholm AB (Sweden))

    2010-12-15

    This report is an appendix to 'Environmental Impact Assessment Interim storage, encapsulation and disposal of spent nuclear fuel'. The appendix presents the methodology and criteria used in support investigations to conduct impact assessments.

  9. Integrated Climate Change Impacts Assessment in California

    Science.gov (United States)

    Cayan, D. R.; Franco, G.; Meyer, R.; Anderson, M.; Bromirski, P. D.

    2014-12-01

    This paper summarizes lessons learned from an ongoing series of climate change assessments for California, conducted by the scientific community and State and local agencies. A series of three Assessments have considered vulnerability and adaptation issues for both managed and natural systems. California's vulnerability is many faceted, arising because of an exceptionally drought prone climate, open coast and large estuary exposure to sea level rise, sensitive ecosystems and complex human footprint and economy. Key elements of the assessments have been a common set of climate and sea-level rise scenarios, based upon IPCC GCM simulations. Regionalized and localized output from GCM projections was provided to research teams investigating water supply, agriculture, coastal resources, ecosystem services, forestry, public health, and energy demand and hydropower generation. The assessment results are helping to investigate the broad range of uncertainty that is inherent in climate projections, and users are becoming better equipped to process an envelope of potential climate and impacts. Some projections suggest that without changes in California's present fresh-water delivery system, serious water shortages would take place, but that technical solutions are possible. Under a warmer climate, wildfire vulnerability is heightened markedly in some areas--estimated increases in burned area by the end of the 21st Century exceed 100% of the historical area burned in much of the forested areas of Northern California Along California coast and estuaries, projected rise in mean sea level will accelerate flooding occurrences, prompting the need for better education and preparedness. Many policymakers and agency personnel in California are factoring in results from the assessments and recognize the need for a sustained assessment process. An ongoing challenge, of course, is to achieve more engagement with a broader community of decision makers, and notably with the private sector.

  10. Qualitative Assessment: Evaluating the Impacts of Climate ...

    Science.gov (United States)

    The South Fork Nooksack River (South Fork) is located in northwest Washington State and is home to nine species of Pacific salmon, including Nooksack early Chinook (aka, spring Chinook salmon), an iconic species for the Nooksack Indian Tribe. The quantity of salmon in the South Fork, especially spring Chinook salmon, has dramatically declined from historic levels, due primarily to habitat degradation from the legacy impacts of various land uses such as commercial forestry, agriculture, flood control, and transportation infrastructure. Segments of the South Fork and some of its tributaries exceed temperature criteria established for the protection of cold-water salmonid populations, and were listed on Washington State’s Clean Water Act (CWA) 303(d) list of impaired waterbodies. High water temperatures in the South Fork are detrimental to fish and other native species that depend on cool, clean, well-oxygenated water. Of the nine salmon species, three have been listed as threatened under the federal Endangered Species Act (ESA) and are of high priority to restoration efforts in the South Fork—spring Chinook salmon, summer steelhead trout, and bull trout. Growing evidence shows that climate change will exacerbate legacy impacts. This qualitative assessment is a comprehensive analysis of climate change impacts on freshwater habitat and Pacific salmon in the South Fork. It also evaluates the effectiveness of restoration tools that address Pacific salmon recovery.

  11. Framework for assessment of environmental impact (Fasset)

    International Nuclear Information System (INIS)

    Larsson, C.M.

    2002-01-01

    The overall aim of the FASSET project is to develop a framework within which assessment models, relevant to the impact of ionising radiation on the environment, can be applied and results analysed for European ecosystems. Complete documentation on the FASSET project can be found on the FASSET's web-site (www.fasset.org). This paper describes the current state of the project, based on the project's first Annual Report. Seven European ecosystems are considered; four terrestrial (natural forests, semi-natural pastures, agricultural ecosystems and wetlands) and three aquatic (marine, brackish and freshwater). In FASSET Deliverable 1 a list of candidate generic reference organisms has been drawn up on the basis of expert judgement of exposure situations in the selected ecosystems. They serve as a starting points for development of dosimetric models, and for pooling available information on ecological relevance and biological effects. Further analysis of the candidate reference organisms is performed to justify their choice and assess their applicability in different situations, taking into account modelling of radionuclide transfer, estimates of internal and external dose rates, ecological significance and biological effects. Four general 'umbrella' radiation effects on biota are considered that, when manifested in an individual, may have an impact at population level or at higher levels of the organisational hierarchy. The four 'umbrellas' are: morbidity (fitness or well-being), mortality (death directly attributable to radiation), reproductive success (changed number of offspring) and scorable cytogenetic effects (molecular actions, aberrations). A database is being assembled, compiling dose and dose rates data from the literature for a number of organism categories for each of these four umbrella effects. The database also considers the suitability of data to derive the relative biological efficiency (RBE) for different types of radiation. The work from the three

  12. 34 CFR 75.601 - Applicant's assessment of environmental impact.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Applicant's assessment of environmental impact. 75.601... Conditions Must Be Met by a Grantee? Construction § 75.601 Applicant's assessment of environmental impact. An applicant shall include with its application its assessment of the impact of the proposed construction on...

  13. USEtox - The UNEP-SETAC toxicity model: recommended characterisation factors for human toxicity and freshwater ecotoxicity in Life Cycle Impact Assessment

    DEFF Research Database (Denmark)

    Rosenbaum, Ralph K.; Bachmann, Till M; Gold, Lois S.

    2008-01-01

    , and (iii) to build a scientific consensus model from them, representing recommended practice. Methods. A chemical test set of 45 organics covering a wide range of property combinations was selected for this purpose. All models used this set. In three workshops, the model comparison participants identified......, defining a closed or open system environment, or nesting an urban box in a continental box. Discussion. The precision of the new characterisation factors (CFs) is within a factor of 100-1000 for human health and 10-100 for freshwater ecotoxicity of all other models compared to 12 orders of magnitude......Background, Aim and Scope. In 2005 a comprehensive comparison of LCIA toxicity characterisation models was initiated by the UNEP-SETAC Life Cycle Initiative, directly involving the model developers of CalTOX, IMPACT 2002, USES-LCA, BETR, EDIP, WATSON, and EcoSense. In this paper we describe...

  14. Assessing the Impacts of Multiple Breadbasket Failures

    Science.gov (United States)

    Casellas Connors, J. P.; Janetos, A.

    2016-12-01

    A relatively small area of the world accounts for a large proportion of total global cereal production, with most of the area devoted to the production of the world's three major cereal crops, rice, wheat and maize. An extensive literature of the sensitivity of agricultural productivity of these crops, and many others, has arisen over the past 25 years, with a general consensus that continued change in the physical climate system will very likely increase the difficulty of agricultural production in areas of the world that are already marginal with respect to production. But what this research only rarely does is assess the influence of extreme events in shocking agricultural production, and how the rest of the agricultural system reacts, in terms of prices, food insecurity, subsequent land-use change, and terrestrial carbon emissions, among many other possible responses. Because the agricultural system is interlinked with energy systems, food distribution and transportation systems, and economic systems, models that focus only on agricultural productivity can only provide a unidimensional view of the magnitude of potential impacts. We know such impacts can occur as a consequence of extreme climatic events, because they have - the impact of the severe regional drought and heat wave on the Russian and Ukrainian wheat harvests in 2010 had global consequences for food prices, just as one example. In this paper, we use an Integrated Assessment Model, the Global Change Assessment Model (GCAM), to investigate the potential outcomes of both moderate and severe shocks to agricultural productivity in the major breadbaskets of the world - both singly and in combination. The results demonstrate clearly that there are likely to be multidimensional consequences from the kinds of shocks that are possible from a rapidly changing climate system, especially when combined with other demographic and economic trends in the coming decades. These results are only one aspect of

  15. Environmental assessment of current and future Swiss electricity supply options

    International Nuclear Information System (INIS)

    Bauer, Christian; Heck, Thomas; Hirschberg, Stefan; Dones, Roberto

    2008-01-01

    Options for near future electricity supply are currently one of the main topics in the Swiss energy policy debate. Contrary to the total energy demand per capita the trend of rising electricity demand per capita is still visible. This paper presents a comparative environmental assessment of a broad portfolio of current and future electricity generation technologies including nuclear, fossil, and renewable power plants with their associated energy chains. The evaluation, based on Life Cycle Assessment (LCA), is carried out quantifying ten different environmental indicators, grouped in the categories greenhouse gas emissions, consumption of resources, waste, and impact on ecosystems. Hydropower shows minimal environmental impacts for all indicators; for other systems, the picture is diverse. The comparison of non-aggregated indicators allows preliminary conclusions about the environmental performance of the assessed systems. Establishing ranking of technologies calls for aggregating the indicators, which can be done by weighting of the indicators based on individual or stakeholder group preferences, either within a Multi-Criteria Decision Analysis (MCDA) framework or with Life Cycle Impact Assessment (LCIA) methods. Calculating total costs of electricity by adding external costs due to impacts on human health and ecosystems to the electricity production costs poses another option for ranking of technologies. (authors)

  16. Environmental impact assessment of nuclear desalination

    International Nuclear Information System (INIS)

    2010-03-01

    Nuclear desalination is gaining interest among the IAEA Member States, as indicated by the planned projects, and it is expected that the number of nuclear desalination plants will increase in the near future. The IAEA has already provided its Member States with reports and documents that disseminate information regarding the technical and economic feasibility of nuclear desalination. With the rising environmental awareness, in the scope of IAEA's activities on seawater desalination using nuclear power, a need was identified for a report that would provide a generic assessment of the environmental issues in nuclear desalination. In order to offer an overview of specific environmental impacts which are to be expected, their probable magnitude, and recommended mitigation measures, this publication encompasses information provided by the IAEA Member States as well as other specialized sources. It is intended for decision makers and experts dealing with environmental, desalination and water management issues, offering insight into the environmental aspects that are essential in planning and developing nuclear desalination

  17. Environmental impact assessment: Retrospect and prospect

    International Nuclear Information System (INIS)

    Jay, Stephen; Jones, Carys; Slinn, Paul; Wood, Christopher

    2007-01-01

    The widespread experience of environmental impact assessment (EIA) as an anticipatory environmental management tool has generated a considerable debate over the extent to which it is achieving its purposes. This has been measured in terms of EIA 'effectiveness', especially as discussion has moved away from issues of procedural implementation, to the more substantive goals of EIA and its place within broader decision-making contexts. Empirical studies have revealed the relatively weak degree of influence on planning decisions that is being exerted by EIA, which is increasingly being attributed to its rationalist beginnings. This article seeks to direct this debate towards the founding political purposes of EIA which, it is argued, provide a neglected, yet strong, basis for EIA reform. A number of illustrative suggestions are made as a result of this redirection, to enable EIA to adopt a more determinative role in decision making and to contribute to more sustainable patterns of development planning

  18. Exploring Health Impact Assessment in Europe

    Directory of Open Access Journals (Sweden)

    Matthias Wismar

    2007-09-01

    Full Text Available

    Background: Health impact assessment (HIA prospectively judges the potential health impacts of pending decisions and feeds the assessment back into the decision making process. HIA is considered as a key tool for intersectoral collaboration. This article presents selected results of a mapping exercise on HIA in Europe. The mapping exercise is complemented by the presentation of a conceptual framework on the effectiveness of HIA and illustrative examples.

    Method: Two methodologies are employed in this article: First, the use of HIA across Europe is based on a survey conducted by 21 teams in 19 countries. A semi standardized questionnaire was employed, using a wide variety of sources. Second, for the discussion on the effectiveness of HIA, a conceptual framework using four types of effectiveness was employed. Results: HIA is a common practice only in a handful of European countries. In most of Europe, HIA is at an early developmental stage. The mapping exercise, however, provides evidence that HIA can work across all sectors and at all political level, although there is currently a focus on the local level. HIA is conducted in different countries by different sets of actors and organizations, reflecting the existing setup. The evidence on the effectiveness of HIA is still inconclusive. However, single case studies and upcoming evidence suggests that HIA has the capacity to inform and influence the decision making process.

    Conclusions: HIA can work and deliver. The variations in context across European countries have resulted in different forms of implementation and different dynamics of developing HIA.

  19. Catalysis-by-design impacts assessment

    Energy Technology Data Exchange (ETDEWEB)

    Fassbender, L L; Young, J K [Pacific Northwest Lab., Richland, WA (USA); Sen, R K [Sen (R.K.) and Associates, Washington, DC (USA)

    1991-05-01

    Catalyst researchers have always recognized the need to develop a detailed understanding of the mechanisms of catalytic processes, and have hoped that it would lead to developing a theoretical predictive base to guide the search for new catalysts. This understanding allows one to develop a set of hierarchical models, from fundamental atomic-level ab-initio models to detailed engineering simulations of reactor systems, to direct the search for optimized, efficient catalyst systems. During the last two decades, the explosions of advanced surface analysis techniques have helped considerably to develop the building blocks for understanding various catalytic reactions. An effort to couple these theoretical and experimental advances to develop a set of hierarchical models to predict the nature of catalytic materials is a program entitled Catalysis-by-Design (CRD).'' In assessing the potential impacts of CBD on US industry, the key point to remember is that the value of the program lies in developing a novel methodology to search for new catalyst systems. Industrial researchers can then use this methodology to develop proprietary catalysts. Most companies involved in catalyst R D have two types of ongoing projects. The first type, what we call market-driven R D,'' are projects that support and improve upon a company's existing product lines. Project of the second type, technology-driven R D,'' are longer term, involve the development of totally new catalysts, and are initiated through scientists' research ideas. The CBD approach will impact both types of projects. However, this analysis indicates that the near-term impacts will be on market-driven'' projects. The conclusions and recommendations presented in this report were obtained by the authors through personal interviews with individuals involved in a variety of industrial catalyst development programs and through the three CBD workshops held in the summer of 1989. 34 refs., 7 figs., 7 tabs.

  20. Water-quality impact assessment for hydropower

    International Nuclear Information System (INIS)

    Daniil, E.I.; Gulliver, J.; Thene, J.R.

    1991-01-01

    A methodology to assess the impact of a hydropower facility on downstream water quality is described. Negative impacts can result from the substitution of discharges aerated over a spillway with minimally aerated turbine discharges that are often withdrawn from lower reservoir levels, where dissolved oxygen (DO) is typically low. Three case studies illustrate the proposed method and problems that can be encountered. Historic data are used to establish the probability of low-dissolved-oxygen occurrences. Synoptic surveys, combined with downstream monitoring, give an overall picture of the water-quality dynamics in the river and the reservoir. Spillway aeration is determined through measurements and adjusted for temperature. Theoretical computations of selective withdrawal are sensitive to boundary conditions, such as the location of the outlet-relative to the reservoir bottom, but withdrawal from the different layers is estimated from measured upstream and downstream temperatures and dissolved-oxygen profiles. Based on field measurements, the downstream water quality under hydropower operation is predicted. Improving selective withdrawal characteristics or diverting part of the flow over the spillway provided cost-effective mitigation solutions for small hydropower facilities (less than 15 MW) because of the low capital investment required

  1. Assessing the EC ILUC proposal. Dutch national ILUC Impact Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Peters, D.; Toop, G.; Van den Bos, A.; Spoettle, M.

    2013-04-15

    Indirect Land Use Change (ILUC) is the effect that when existing agricultural land producing food is used for biofuel feedstock production, food production is reduced and this reduction is partially compensated by the conversion of non-agricultural land into new cropland elsewhere. ILUC can have a negative impact on the GHG performance of biofuels and can lead to loss of biodiversity. ILUC, its quantification and possible policy measures have been debated in the EU since 2008. The final legislative text to be negotiated on the basis of the ILUC proposal is likely to have a profound impact on the current EU biofuels market but especially on its future development. This report assesses the legal soundness and factual basis of the proposal. It also assesses the policy risks, effectiveness of, and economic consequences resulting from the four most important proposed measures. Alternative scenarios are explored for each of the proposed measures. The report starts with a description of the Dutch biofuels market as the current situation and future perspective of this market is naturally of specific concern for Dutch negotiators in Brussels. This report takes the IFPRI (International Food Policy Research Institute) 2011 modelling study as a starting point when assessing the ILUC impacts of EU biofuels. The IFPRI study modelling results assign high ILUC emissions to conventional biodiesel and assigns much lower ILUC emissions to conventional ethanol. The study does not model ILUC effects of advanced biofuels. The Dutch biofuels market is dominated by biodiesel, of which a large share is double counting. Following the IFPRI 2011 ILUC modelling, this means that a high share of biofuels with a high ILUC risk are supplied to the market but also a high share of advanced, double counting biofuels with a low to medium ILUC risk. The Netherlands hosts a relatively large oilseed crushing and biofuel production industry, of which an important share consists of advanced biofuel

  2. An Assessment of Environmental Impacts Assessment (EIA in Malaysia

    Directory of Open Access Journals (Sweden)

    Abdul Hamid Masdiah

    2017-01-01

    Full Text Available The effectiveness of Environmental Impact Assessment (EIA in evaluating the planning project is a debatable issue among academics and practitioners, since EIA has been claimed to be unable to eliminate the environmental issues. Focusing only on technical improvements is not sufficient for rectifying the problems of EIA; the process of EIA should be clearly identified instead to maximise the effective use of EIA. It is important to note that the effective use of EIA, particularly on process-related issues could significantly minimise bad environmental effects. In summary, this study aims to explore and identify the effectiveness of EIA in the planning process and barriers to evaluate the environmental performance in Malaysia. The findings of this study could be a baseline for organisation to minimize emission, avoid the risk of prosecution and fines arising from potential environment breaches and cost reduction within the organisation.

  3. Environmental impact assessment - baseline noise survey and noise impact assessment for Aurora Mine

    International Nuclear Information System (INIS)

    Yee, S.

    1996-01-01

    A noise impact assessment was conducted at Syncrude's proposed Aurora Mine site to comply with Alberta Energy and Utilities Board (AEUB) Noise Control Directive ID 94-4. Noise assessments were conducted near a major noise source, i.e. the hydraulic and electric shovels. Noise levels at 50 meters away from the source varied from 72.3 to 79.7 dBA. The worst case noise level was 75 dBA measured at 100 meters away from a hydraulic shovel. This assessment was used to calculate the predicted design sound level from a noise source at the nearest or most impacted occupied dwelling. Two cabins located near the access road and along Kearl Lake respectively, were identified as the most impacted and nearest dwellings to the mine site. The predicted sound level at one cabin was 43 dBA, and 55 dBA at the other. Fort McKay was also assessed because it is the nearest community to the mine site. The sound level at Fort McKay was predicted to be 34 dBA. These results indicate that the sound level from Aurora Mine is not in compliance with the AEUB Noise Control Directive. Attenuation measures are required to reduce the noise to acceptable level at Cabin A and B. Predicted sound level at Fort McKay is lower than the permitted sound level

  4. The methodology of environmental impacts assessment of environmentally hazardous facilities

    OpenAIRE

    Adamenko, Yaroslav

    2017-01-01

    The article deals with the methodology of environmental impacts assessment of environmentally hazardous facilities and activities. The stages of evaluation of environmental impacts are proved. The algorithm and technology of decision-making in the system of environmental impact assessments based on a multi-criteria utility theory are proposed.

  5. Assessing Climate Change Impacts on Global Hydropower

    Directory of Open Access Journals (Sweden)

    Aanund Killingtveit

    2012-02-01

    Full Text Available Currently, hydropower accounts for close to 16% of the world’s total power supply and is the world’s most dominant (86% source of renewable electrical energy. The key resource for hydropower generation is runoff, which is dependent on precipitation. The future global climate is uncertain and thus poses some risk for the hydropower generation sector. The crucial question and challenge then is what will be the impact of climate change on global hydropower generation and what are the resulting regional variations in hydropower generation potential? This paper is a study that aims to evaluate the changes in global hydropower generation resulting from predicted changes in climate. The study uses an ensemble of simulations of regional patterns of changes in runoff, computed from global circulation models (GCM simulations with 12 different models. Based on these runoff changes, hydropower generation is estimated by relating the runoff changes to hydropower generation potential through geographical information system (GIS, based on 2005 hydropower generation. Hydropower data obtained from EIA (energy generation, national sites, FAO (water resources and UNEP were used in the analysis. The countries/states were used as computational units to reduce the complexities of the analysis. The results indicate that there are large variations of changes (increases/decreases in hydropower generation across regions and even within regions. Globally, hydropower generation is predicted to change very little by the year 2050 for the hydropower system in operation today. This change amounts to an increase of less than 1% of the current (2005 generation level although it is necessary to carry out basin level detailed assessment for local impacts which may differ from the country based values. There are many regions where runoff and hydropower generation will increase due to increasing precipitation, but also many regions where there will be a decrease. Based on this

  6. Social impact assessment of subsurface drainage

    International Nuclear Information System (INIS)

    Azhar, A.H.; Rafiq, M.; Alam, M.M.

    2005-01-01

    Social impact assessment of four drainage projects namely; Mardan SCARP Project (MSP), Fourth Drainage Project, Faisalabad (FDP), Chashma Command Area Development Project (CCADP) and Mirpurkhas Tile Drainage Project (MKOP) has been done. For this purpose, a socio-technical survey was carried out in which randomly selected farmers were interviewed. The investigations revealed that although significant population (-77%) at four study sites was educated, yet, the farmers were not satisfactorily educated to understand the operation and maintenance of drainage systems. The perusal of data revealed that 14%, 17% and 25% respondents from MSP, FOP and MKDP respectively had to migrate from their villages mainly due to pre-project water logging problem. However, installation of drainage systems in those areas improved the situation resulting in the increase of farm income, which was an attraction for them to return to their villages. The analysis of farm mechanization revealed that at MSP, FDP, CCADP and MKOP sites 71%, 42%, 40% and 75% respondents respectively were tractor owners and owners of some kind of other farm implements, whereas, remaining respondents were performing their farm operations on hire basis. Although, hire operation basis is much better than traditional ways, however, improving the farm mechanization could further enhance the benefits of drainage systems. The investigations revealed that a significant majority of respondents at four project sites had never met the Agricultural Extension Officer. The farmers' access to financing institutions such as ZTB was also negligible. There was lack of coordination among various departments such as WAPDA, Agriculture Extension and Irrigation and Power Department at four study sites. Nevertheless, the overall social impact investigations did reveal that the objectives of drainage systems installation have been achieved in terms of uplifting the socio-economic conditions of drainage areas. To make the efficient use of

  7. Practitioners, professional cultures, and perceptions of impact assessment

    International Nuclear Information System (INIS)

    Morgan, Richard K.; Hart, Andrew; Freeman, Claire; Coutts, Brian; Colwill, David; Hughes, Andrew

    2012-01-01

    The very nature of impact assessment (IA) means that it often involves practitioners from a very wide range of disciplinary and professional backgrounds, which open the possibility that how IA is perceived and practised may vary according to the professional background of the practitioner. The purpose of this study is to investigate the extent to which a practitioner's professional background influences their perceptions of the adequacy of impact assessment in New Zealand under the Resource Management Act (RMA). Information gathered concerned professional affiliations, training, understanding of impact assessment practise, and perceptions of adequacy in relation to impact assessment. The results showed a dominance of a legalistic, operational perspective of impact assessment under the Resource Management Act, across all the main professions represented in the study. However, among preparers of impact assessments there was clear evidence of differences between the four main professional groups – surveyors, planners, engineers and natural scientists – in the way they see the nature and purpose of impact assessment, the practical steps involved, and what constitutes adequacy. Similarly, impact assessment reviewers – predominantly planners and lawyers – showed variations in their expectations of impact assessment depending on their respective professional affiliation. Although in many cases the differences seem to be more of a matter of emphasis, rather than major disputes on what constitutes a good process, even those differences can add up to rather distinct professional cultures of impact assessment. The following factors are seen as leading to the emergence of such professional cultures: different professions often contribute in different ways to an impact assessment, affecting their perception of the nature and purpose of the process; impact assessment training will usually be a secondary concern, compared with the core professional training, which will be

  8. Determining Vulnerability Importance in Environmental Impact Assessment

    International Nuclear Information System (INIS)

    Toro, Javier; Duarte, Oscar; Requena, Ignacio; Zamorano, Montserrat

    2012-01-01

    The concept of vulnerability has been used to describe the susceptibility of physical, biotic, and social systems to harm or hazard. In this sense, it is a tool that reduces the uncertainties of Environmental Impact Assessment (EIA) since it does not depend exclusively on the value assessments of the evaluator, but rather is based on the environmental state indicators of the site where the projects or activities are being carried out. The concept of vulnerability thus reduces the possibility that evaluators will subjectively interpret results, and be influenced by outside interests and pressures during projects. However, up until now, EIA has been hindered by a lack of effective methods. This research study analyzes the concept of vulnerability, defines Vulnerability Importance and proposes its inclusion in qualitative EIA methodology. The method used to quantify Vulnerability Importance is based on a set of environmental factors and indicators that provide a comprehensive overview of the environmental state. The results obtained in Colombia highlight the usefulness and objectivity of this method since there is a direct relation between this value and the environmental state of the departments analyzed. - Research Highlights: ► The concept of vulnerability could be considered defining Vulnerability Importance included in qualitative EIA methodology. ► The use of the concept of environmental vulnerability could reduce the subjectivity of qualitative methods of EIA. ► A method to quantify the Vulnerability Importance proposed provides a comprehensive overview of the environmental state. ► Results in Colombia highlight the usefulness and objectivity of this method.

  9. Developing the RIAM method (rapid impact assessment matrix) in the context of impact significance assessment

    International Nuclear Information System (INIS)

    Ijaes, Asko; Kuitunen, Markku T.; Jalava, Kimmo

    2010-01-01

    In this paper the applicability of the RIAM method (rapid impact assessment matrix) is evaluated in the context of impact significance assessment. The methodological issues considered in the study are: 1) to test the possibilities of enlarging the scoring system used in the method, and 2) to compare the significance classifications of RIAM and unaided decision-making to estimate the consistency between these methods. The data used consisted of projects for which funding had been applied for via the European Union's Regional Development Trust in the area of Central Finland. Cases were evaluated with respect to their environmental, social and economic impacts using an assessment panel. The results showed the scoring framework used in RIAM could be modified according to the problem situation at hand, which enhances its application potential. However the changes made in criteria B did not significantly affect the final ratings of the method, which indicates the high importance of criteria A1 (importance) and A2 (magnitude) to the overall results. The significance classes obtained by the two methods diverged notably. In general the ratings given by RIAM tended to be smaller compared to intuitive judgement implying that the RIAM method may be somewhat conservative in character.

  10. 76 FR 37823 - Published Privacy Impact Assessments on the Web

    Science.gov (United States)

    2011-06-28

    ... DEPARTMENT OF HOMELAND SECURITY Office of the Secretary Published Privacy Impact Assessments on... Department. These assessments were approved and published on the Privacy Office's Web site between March 31... 31, 2011, the Chief Privacy Officer of the DHS approved and published ten Privacy Impact Assessments...

  11. Assessing Impact Submissions for REF 2014: An Evaluation

    Science.gov (United States)

    Manville, Catriona; Guthrie, Susan; Henham, Marie-Louise; Garrod, Bryn; Sousa, Sonia; Kirtley, Anne; Castle-Clarke, Sophie; Ling, Tom

    2015-01-01

    The Research Excellence Framework (REF) is a new system for assessing the quality of research in UK higher education institutions (HEIs). For the first time, part of the assessment included the wider impact of research. RAND Europe was commissioned to evaluate the assessment process of the impact element of REF submissions, and to explore the…

  12. Noise impact assessment of wind farms

    International Nuclear Information System (INIS)

    Hayes, M.

    1993-01-01

    The noise impact assessment of a wind farm is dependent upon a number of factors pertinent to the site. The most controversial is the selection of a criterion which is acceptable to both the developer of a site, in terms of maximising the number of turbines he may operate without fear of injunction to stop, and the local residents and Environmental Health Officer who will have to enforce any agreements. A number of British Standards exist which cover noise issues. There are, however, certain reservations about their use when applied to potential wind farm developments; some of the more relevant standards are outlined. In addition, Draft Planning Guidance notes which have recently been issued are discussed. These are intended to provide an indication to local planning authorities as to what noise levels and criteria may be acceptable when considering noise emitted by wind farms. No European standard for noise emission from wind farms exists but the legislative position in Denmark, the Netherlands, Germany and Sweden is briefly considered. It is considered that when a maximum level criterion is set it should take into account the existing background noise levels based on measurements which are taken at the most sensitive dwellings to the site. A method for calculating emitted noise levels from turbine arrays is described. (UK)

  13. Overview of Environmental Impact Assessment of Oil and Gas ...

    African Journals Online (AJOL)

    The environmental impact assessment (EIA) of oil and gas projects in Nigeria ... natural, social and health components of the environment; Determination of issues ... of impact quantification through which the Environmental Management Plan ...

  14. The potential impact of computer-aided assessment technology in ...

    African Journals Online (AJOL)

    The potential impact of computer-aided assessment technology in higher education. ... Further more 'Increased number of students in Higher Education and the ... benefits, limitations, impacts on student learning and strategies for developing ...

  15. The regional impacts of climate change: an assessment of vulnerability

    National Research Council Canada - National Science Library

    Zinyowera, Marufu C; Moss, Richard H; Watson, R. T

    1998-01-01

    .... The Regional Impacts of Climate Change: An Assessment of Vulnerability reviews state-of-the-art information on potential impacts of climate change for ecological systems, water supply, food production, coastal infrastructure, human health...

  16. Screening assessment and requirements for a comprehensive assessment: Volume 1, Draft. Columbia River comprehensive impact assessment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-04-01

    To evaluate the impact to the Columbia River from the Hanford Site-derived contaminants, the U.S. Department of Energy, U.S. Environmental Protection Agency, and Washington State Department of Ecology initiated a study referred to as the Columbia River Comprehensive Impact Assessment (CRCIA). To address concerns about the scope and direction of CRCIA as well as enhance regulator, tribal, stockholder, and public involvement, the CRCIA Management Team was formed in August 1995. The Team agreed to conduct CRCIA using a phased approach. The initial phase, includes two components: 1) a screening assessment to evaluate the potential impact to the river, resulting from current levels of Hanford-derived contaminants in order to support decisions on Interim Remedial Measures, and 2) a definition of the essential work remaining to provide an acceptable comprehensive river impact assessment. The screening assessment is described in Part I of this report. The essential work remaining is Part II of this report. The objective of the screening assessment is to identify areas where the greatest potential exists for adverse effects on humans or the environment. Part I of this report discusses the scope, technical approach, and results of the screening assessment. Part II defines a new paradigm for predecisional participation by those affected by Hanford cleanup decisions.

  17. Screening assessment and requirements for a comprehensive assessment: Volume 1, Draft. Columbia River comprehensive impact assessment

    International Nuclear Information System (INIS)

    1997-04-01

    To evaluate the impact to the Columbia River from the Hanford Site-derived contaminants, the U.S. Department of Energy, U.S. Environmental Protection Agency, and Washington State Department of Ecology initiated a study referred to as the Columbia River Comprehensive Impact Assessment (CRCIA). To address concerns about the scope and direction of CRCIA as well as enhance regulator, tribal, stockholder, and public involvement, the CRCIA Management Team was formed in August 1995. The Team agreed to conduct CRCIA using a phased approach. The initial phase, includes two components: 1) a screening assessment to evaluate the potential impact to the river, resulting from current levels of Hanford-derived contaminants in order to support decisions on Interim Remedial Measures, and 2) a definition of the essential work remaining to provide an acceptable comprehensive river impact assessment. The screening assessment is described in Part I of this report. The essential work remaining is Part II of this report. The objective of the screening assessment is to identify areas where the greatest potential exists for adverse effects on humans or the environment. Part I of this report discusses the scope, technical approach, and results of the screening assessment. Part II defines a new paradigm for predecisional participation by those affected by Hanford cleanup decisions

  18. E-IMPACT - A ROBUST HAZARD-BASED ENVIRONMENTAL IMPACT ASSESSMENT APPROACH FOR PROCESS INDUSTRIES

    Directory of Open Access Journals (Sweden)

    KHANDOKER A. HOSSAIN

    2008-04-01

    Full Text Available This paper proposes a hazard-based environmental impact assessment approach (E-Impact, for evaluating the environmental impact during process design and retrofit stages. E-Impact replaces the normalisation step of the conventional impact assessment phase. This approach compares the impact scores for different options and assigns a relative score to each option. This eliminates the complexity of the normalisation step in the evaluation phase. The applicability of the E-Impact has been illustrated through a case study of solvent selection in an acrylic acid manufacturing plant. E-Impact is used in conjunction with Aspen-HYSYS process simulator to develop mass and heat balance data.

  19. Occupational Health Impacts Due to Exposure to Organic Chemicals over an Entire Product Life Cycle.

    Science.gov (United States)

    Kijko, Gaël; Jolliet, Olivier; Margni, Manuele

    2016-12-06

    This article presents an innovative approach to include occupational exposures to organic chemicals in life cycle impact assessment (LCIA) by building on the characterization factors set out in Kijko et al. (2015) to calculate the potential impact of occupational exposure over the entire supply chain of product or service. Based on an economic input-output model and labor and economic data, the total impacts per dollar of production are provided for 430 commodity categories and range from 0.025 to 6.6 disability-adjusted life years (DALY) per million dollar of final economic demand. The approach is applied on a case study assessing human health impacts over the life cycle of a piece of office furniture. It illustrates how to combine monitoring data collected at the manufacturing facility and averaged sector specific data to model the entire supply chain. This paper makes the inclusion of occupational exposure to chemicals fully compatible with the LCA framework by including the supply chain of a given production process and will help industries focus on the leading causes of human health impacts and prevent impact shifting.

  20. Assessing the impacts of climate change on natural resource systems

    Energy Technology Data Exchange (ETDEWEB)

    Frederick, K.D.; Rosenberg, N.J. [eds.

    1994-11-30

    This volume is a collection of papers addressing the theme of potential impacts of climatic change. Papers are entitled Integrated Assessments of the Impacts of Climatic Change on Natural Resources: An Introductory Editorial; Framework for Integrated Assessments of Global Warming Impacts; Modeling Land Use and Cover as Part of Global Environmental Change; Assessing Impacts of Climatic Change on Forests: The State of Biological Modeling; Integrating Climatic Change and Forests: Economic and Ecological Assessments; Environmental Change in Grasslands: Assessment using Models; Assessing the Socio-economic Impacts of Climatic Change on Grazinglands; Modeling the Effects of Climatic Change on Water Resources- A Review; Assessing the Socioeconomic Consequences of Climate Change on Water Resources; and Conclusions, Remaining Issues, and Next Steps.

  1. Assessing the demographic and public service impacts of repository siting

    International Nuclear Information System (INIS)

    Murdock, S.H.; Hamm, R.R.

    1983-01-01

    Demographic and public service impacts are likely to be among the most evident of those changes resulting from nuclear waste repository development. Knowledge of the characteristics of such impacts and of the means to assess them is critical. The first section of this chapter examines those likely to be unique to repositories. The second section describes the alternatives for assessing such impacts and the particular difficulties likely to affect the assessments. Given the state of development of techniques for assessing impacts and the range of factors that must be considered, perhaps their best use is as a means of sensitizing decision makers to the potential implications of their decisions. 2 tables

  2. Conceptualizing impact assessment as a learning process

    International Nuclear Information System (INIS)

    Sánchez, Luis E.; Mitchell, Ross

    2017-01-01

    This paper explores how project developers and their consultants, government regulators and stakeholders can learn from the impact assessment (IA) process, thus potentially improving its effectiveness and enhancing project sustainability. Despite the benefits that learning can bring to an organization, failure to learn appears commonplace both within the IA process and, once approved, subsequent industrial development. To nurture organizational learning through IA, enabling structures that foster information sharing and interpretation and enhance organizational memory are needed. In this paper learning outcomes are grouped into three categories: acquisition of knowledge and skills, developing new behaviors and developing sustainability-oriented norms and values. Means to achieve such outcomes include education and training, experiential learning, learning through public participation (social learning) and a ‘learning organization approach’. Societal expectations increasingly demand not only projects that ‘pass’ the review criteria of regulators, financiers and the community, but IA processes capable of delivering sustainable outcomes that include learning and sharing of knowledge. It is proposed that learning be treated as a purposeful – not as an accidental – outcome of IA, and facilitated by adopting a ‘learning organization approach’ coupled with best practice such as early stakeholder engagement. - Highlights: • Proponents are challenged to develop projects that deliver sustainable outcomes. • Passing the test of government approval may be insufficient to obtain a social license. • Learning by all stakeholders is vital to meet these challenges. • Learning outcomes have to go beyond instrumental learning to reach new behaviors, norms and values. • A “learning organization approach” can promote mutual learning and improve project design.

  3. Conceptualizing impact assessment as a learning process

    Energy Technology Data Exchange (ETDEWEB)

    Sánchez, Luis E., E-mail: lsanchez@usp.br [Escola Politécnica, University of São Paulo, Av. Prof. Mello Moraes, 2373, 05508-900 São Paulo (Brazil); Mitchell, Ross, E-mail: ross.mitchell@ualberta.net [Shell International Exploration & Production BV (Netherlands)

    2017-01-15

    This paper explores how project developers and their consultants, government regulators and stakeholders can learn from the impact assessment (IA) process, thus potentially improving its effectiveness and enhancing project sustainability. Despite the benefits that learning can bring to an organization, failure to learn appears commonplace both within the IA process and, once approved, subsequent industrial development. To nurture organizational learning through IA, enabling structures that foster information sharing and interpretation and enhance organizational memory are needed. In this paper learning outcomes are grouped into three categories: acquisition of knowledge and skills, developing new behaviors and developing sustainability-oriented norms and values. Means to achieve such outcomes include education and training, experiential learning, learning through public participation (social learning) and a ‘learning organization approach’. Societal expectations increasingly demand not only projects that ‘pass’ the review criteria of regulators, financiers and the community, but IA processes capable of delivering sustainable outcomes that include learning and sharing of knowledge. It is proposed that learning be treated as a purposeful – not as an accidental – outcome of IA, and facilitated by adopting a ‘learning organization approach’ coupled with best practice such as early stakeholder engagement. - Highlights: • Proponents are challenged to develop projects that deliver sustainable outcomes. • Passing the test of government approval may be insufficient to obtain a social license. • Learning by all stakeholders is vital to meet these challenges. • Learning outcomes have to go beyond instrumental learning to reach new behaviors, norms and values. • A “learning organization approach” can promote mutual learning and improve project design.

  4. GIS based procedure of cumulative environmental impact assessment.

    Science.gov (United States)

    Balakrishna Reddy, M; Blah, Baiantimon

    2009-07-01

    Scale and spatial limits of impact assessment study in a GIS platform are two very important factors that could have a bearing on the genuineness and quality of impact assessment. While effect of scale has been documented and well understood, no significant study has been carried out on spatial considerations in an impact assessment study employing GIS technique. A novel technique of impact assessment demonstrable through GIS approach termed hereby as 'spatial data integrated GIS impact assessment method (SGIAM)' is narrated in this paper. The technique makes a fundamental presumption that the importance of environmental impacts is dependent, among other things, on spatial distribution of the effects of the proposed action and of the affected receptors in a study area. For each environmental component considered (e.g., air quality), impact indices are calculated through aggregation of impact indicators which are measures of the severity of the impact. The presence and spread of environmental descriptors are suitably quantified through modeling techniques and depicted. The environmental impact index is calculated from data exported from ArcINFO, thus giving significant importance to spatial data in the impact assessment exercise.

  5. Impacts assessment for the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Bay Area Economics

    1996-12-01

    This report documents the economic and other impacts that will be created by the National Ignition Facility (NIF) construction and ongoing operation, as well as the impacts that may be created by new technologies that may be developed as a result of NIF development and operation.

  6. Asteroid Impact & Deflection Assessment mission: Kinetic impactor

    Czech Academy of Sciences Publication Activity Database

    Cheng, A.F.; Michel, R.; Jutzi, M.; Rivkin, A. S.; Stickle, A.; Barnouin, O.; Ernst, C.; Atchison, J.; Pravec, Petr; Richardson, D.C.

    2016-01-01

    Roč. 121, February (2016), s. 25-37 ISSN 0032-0633 Institutional support: RVO:67985815 Keywords : planetary defense * near- Earth asteroids * asteroid impact hazards Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 1.892, year: 2016

  7. Assessing impacts of roads: Application of a standard assessment protocol

    Science.gov (United States)

    Adaptive management of road networks depends on timely data that accurately reflect the impacts of network impacts on ecosystem processes and associated services. In the absence of reliable data, land managers are left with little more than observations and perceptions to support adaptive management...

  8. Analysis of Embodied Environmental Impacts of Korean Apartment Buildings Considering Major Building Materials

    Directory of Open Access Journals (Sweden)

    Seungjun Roh

    2018-05-01

    Full Text Available Because the reduction in environmental impacts (EIs of buildings using life-cycle assessment (LCA has been emphasized as a practical strategy for the sustainable development of the construction industry, studies are required to analyze not only the operational environmental impacts (OEIs of buildings, but also the embodied environmental impacts (EEIs of building materials. This study aims to analyze the EEIs of Korean apartment buildings on the basis of major building materials as part of research with the goal of reducing the EIs of buildings. For this purpose, six types of building materials (ready-mixed concrete, reinforcement steel, concrete bricks, glass, insulation, and gypsum for apartment buildings were selected as major building materials, and their inputs per unit area according to the structure types and plans of apartment buildings were derived by analyzing the design and bills of materials of 443 apartment buildings constructed in South Korea. In addition, a life-cycle scenario including the production, construction, maintenance, and end-of-life stage was constructed for each major building material. The EEIs of the apartment buildings were quantitatively assessed by applying the life-cycle inventory database (LCI DB and the Korean life-cycle impact assessment (LCIA method based on damage-oriented modeling (KOLID, and the results were analyzed.

  9. How Many Environmental Impact Indicators Are Needed in the Evaluation of Product Life Cycles?

    Science.gov (United States)

    Steinmann, Zoran J N; Schipper, Aafke M; Hauck, Mara; Huijbregts, Mark A J

    2016-04-05

    Numerous indicators are currently available for environmental impact assessments, especially in the field of Life Cycle Impact Assessment (LCIA). Because decision-making on the basis of hundreds of indicators simultaneously is unfeasible, a nonredundant key set of indicators representative of the overall environmental impact is needed. We aimed to find such a nonredundant set of indicators based on their mutual correlations. We have used Principal Component Analysis (PCA) in combination with an optimization algorithm to find an optimal set of indicators out of 135 impact indicators calculated for 976 products from the ecoinvent database. The first four principal components covered 92% of the variance in product rankings, showing the potential for indicator reduction. The same amount of variance (92%) could be covered by a minimal set of six indicators, related to climate change, ozone depletion, the combined effects of acidification and eutrophication, terrestrial ecotoxicity, marine ecotoxicity, and land use. In comparison, four commonly used resource footprints (energy, water, land, materials) together accounted for 84% of the variance in product rankings. We conclude that the plethora of environmental indicators can be reduced to a small key set, representing the major part of the variation in environmental impacts between product life cycles.

  10. A comprehensive environmental impact assessment method for shale gas development

    Directory of Open Access Journals (Sweden)

    Renjin Sun

    2015-03-01

    Full Text Available The great success of US commercial shale gas exploitation stimulates the shale gas development in China, subsequently, the corresponding supporting policies were issued in the 12th Five-Year Plan. But from the experience in the US shale gas development, we know that the resulted environmental threats are always an unavoidable issue, but no uniform and standard evaluation system has yet been set up in China. The comprehensive environment refers to the combination of natural ecological environment and external macro-environment. In view of this, we conducted a series of studies on how to set up a comprehensive environmental impact assessment system as well as the related evaluation methodology and models. First, we made an in-depth investigation into shale gas development procedures and any possible environmental impacts, and then compared, screened and modified environmental impact assessment methods for shale gas development. Also, we established an evaluating system and assessment models according to different status of the above two types of environment: the correlation matrix method was employed to assess the impacts on natural ecological environment and the optimization distance method was modified to evaluate the impacts on external macro-environment. Finally, we substitute the two subindexes into the comprehensive environmental impact assessment model and achieved the final numerical result of environmental impact assessment. This model can be used to evaluate if a shale gas project has any impact on environment, compare the impacts before and after a shale gas development project, or the impacts of different projects.

  11. 76 FR 58814 - Published Privacy Impact Assessments on the Web

    Science.gov (United States)

    2011-09-22

    ... DEPARTMENT OF HOMELAND SECURITY Office of the Secretary Published Privacy Impact Assessments on... DHS. These assessments were approved and published on the Privacy Office's Web site between June 1... 31, 2011, the Chief Privacy Officer of the DHS approved and published twenty-six Privacy Impact...

  12. 76 FR 78934 - Published Privacy Impact Assessments on the Web

    Science.gov (United States)

    2011-12-20

    ... DEPARTMENT OF HOMELAND SECURITY Office of the Secretary Published Privacy Impact Assessments on.... These assessments were approved and published on the Privacy Office's web site between September 1, 2011... November 30, 2011, the Chief Privacy Officer of the DHS approved and published seven Privacy Impact...

  13. 77 FR 46100 - Published Privacy Impact Assessments on the Web

    Science.gov (United States)

    2012-08-02

    ... DEPARTMENT OF HOMELAND SECURITY Office of the Secretary Published Privacy Impact Assessments on... published on the Privacy Office's Web site between March 1, 2012 and May 31, 2012. DATES: The PIAs will be... approved and published fifteen Privacy Impact Assessments (PIAs) on the DHS Privacy Office Web site, www...

  14. The future of human rights impact assessments of trade agreements

    NARCIS (Netherlands)

    Walker, S.M.

    2009-01-01

    The Future of Human Rights Impact Assessments of Trade Agreements develops a methodology for human rights impact assessments of trade agreements and considers whether there is any value in using the methodology on a sustained basis to ensure that the human dimensions of international trade are taken

  15. Rapid Assessment of Anthropogenic Impacts of Exposed Sandy ...

    African Journals Online (AJOL)

    We applied a rapid assessment methodology to estimate the degree of human impact of exposed sandy beaches in Ghana using ghost crabs as ecological indicators. The use of size ranges of ghost crab burrows and their population density as ecological indicators to assess extent of anthropogenic impacts on beaches ...

  16. The Impact of a Computerized Dietary Assessment on Nutrition Knowledge

    Science.gov (United States)

    Hensleigh, Katherine Elizabeth; Eddy, James M.; Wang, Min Qi; Dennison, Darwin; Chaney, J. Don

    2004-01-01

    In recent years, many health educators have integrated computer applications into their health education program interventions. The assessment of the impact of these interventions is limited. This study assessed the impact of the Pyramid Challenge nutrition software program on nutrition knowledge levels of students enrolled in traditional personal…

  17. Spatial information in public consultation within environmental impact assessments

    NARCIS (Netherlands)

    Mwenda, A.N.

    2015-01-01

    Thesis Summary

    Spatial information in public consultation within Environmental Impact Assessments

    Angela N. Mwenda

    Established in the United States of America in 1970, Environmental Impact Assessment (EIA) is an interdisciplinary approach that

  18. Environmental impact assessment in the Nordic Countries; Miljoekonsekvensbeskrivningar i Norden

    Energy Technology Data Exchange (ETDEWEB)

    Broden, K. [Studsvik RadWaste AB (Sweden); Palsson, S.E. [Geislavarnir rikisins (Iceland); Poroddsson, P. [Skipulagsstofnun (Iceland)

    2000-12-01

    A meeting on Environmental Impact Assessment has been held in Iceland, September 2-6, 2000. It was held within the framework of the project NKS/SOS-3 (Radioactive waste), subproject NKS/SOS-3.1 (Environmental Impact Assessment). The meeting included presentations, discussions and a study trip to the Egilsstadir and Myvatn districts. (au)

  19. Geospatial Technology In Environmental Impact Assessments – Retrospective.

    Directory of Open Access Journals (Sweden)

    Goparaju Laxmi

    2015-10-01

    Full Text Available Environmental Impact Assessments are studies conducted to give us an insight into the various impacts caused by an upcoming industry or any developmental activity. It should address various social, economic and environmental issues ensuring that negative impacts are mitigated. In this context, geospatial technology has been used widely in recent times.

  20. Technical Note: Assessment of Impact Damage to Apple Fruits ...

    African Journals Online (AJOL)

    An impact damage assessment of fresh apple fruits was carried out to ascertain the effects of height and surfaces on bruise area and impact energy. Five different impact surfaces namely: Cardboard (E), wood (F), metal (G), plastic (H) and foam (I) were used for the experiment. The weighed fruits were dropped from different ...

  1. Assessing impacts of roads: application of a standard assessment protocol

    Science.gov (United States)

    Duniway, Michael C.; Herrick, Jeffrey E.

    2013-01-01

    Adaptive management of road networks depends on timely data that accurately reflect the impacts those systems are having on ecosystem processes and associated services. In the absence of reliable data, land managers are left with little more than observations and perceptions to support management decisions of road-associated disturbances. Roads can negatively impact the soil, hydrologic, plant, and animal processes on which virtually all ecosystem services depend. The Interpreting Indicators of Rangeland Health (IIRH) protocol is a qualitative method that has been demonstrated to be effective in characterizing impacts of roads. The goal of this study were to develop, describe, and test an approach for using IIRH to systematically evaluate road impacts across large, diverse arid and semiarid landscapes. We developed a stratified random sampling approach to plot selection based on ecological potential, road inventory data, and image interpretation of road impacts. The test application on a semiarid landscape in southern New Mexico, United States, demonstrates that the approach developed is sensitive to road impacts across a broad range of ecological sites but that not all the types of stratification were useful. Ecological site and road inventory strata accounted for significant variability in the functioning of ecological processes but stratification based on apparent impact did not. Analysis of the repeatability of IIRH applied to road plots indicates that the method is repeatable but consensus evaluations based on multiple observers should be used to minimize risk of bias. Landscape-scale analysis of impacts by roads of contrasting designs (maintained dirt or gravel roads vs. non- or infrequently maintained roads) suggests that future travel management plans for the study area should consider concentrating traffic on fewer roads that are well designed and maintained. Application of the approach by land managers will likely provide important insights into

  2. An environmental impact assessment system for agricultural R and D

    International Nuclear Information System (INIS)

    Rodrigues, Geraldo Stachetti; Campanhola, Clayton; Kitamura, Paulo Choji

    2003-01-01

    A strategic planning process has been implemented at the Brazilian Agricultural Research Agency (Embrapa) to introduce sustainable agriculture concepts in all steps of Research and Development (R and D). An essential part of the devised mission statement called for the impact assessment of all technology innovation resulting from R and D, under field conditions (ex-post). However, methods for impact assessment of technology innovations at the farmstead level appropriate for the institutional context were lacking. The environmental impact assessment (EIA) system (AMBITEC-AGRO) developed to attend that demand is composed by a set of weighing matrices constructed in an electronic spreadsheet. Impact indicators are evaluated in the field in an interview/survey, and weighed according to their spatial scale and importance toward effecting environmental impacts. The results of these weighing procedures are expressed graphically in the assessment spreadsheets. Finally, the indicator evaluations are composed into an Environmental Impact Index for the agricultural technology innovation

  3. Climate Change in Environmental Impact Assessment of Renewable Energy Projects

    DEFF Research Database (Denmark)

    Larsen, Sanne Vammen

    2012-01-01

    Many renewable energy projects are subject to EIA. However a question that surfaces is what use an impact assessment is when the project is ‘good for the environment’? One of the current topics receiving much attention in impact assessment is climate change and how this factor is integrated...... in impact assessments. This warrants the question: How do we assess the climate change related impacts of a project that inherently has a positive effect on climate? This paper is based on a document study of EIA reports from Denmark. The results show that climate change is included in most of the EIA...... reports reviewed, and that only climate change mitigation is in focus while adaptation is absent. Also the results point to focus on positive impacts, while the indirect negative impacts are less apparent. This leads to a discussion of the results in the light of the purpose of EIA....

  4. Environmental Impact Assessment in Sustainable Water Resources ...

    African Journals Online (AJOL)

    During project study and design, major environmental impacts of water ... should be identified and made available for decision makers and the public. ... remotely sensed data can be analysed in GIS environment to generate data and map the ...

  5. Assessing the observed impact of anthropogenic climate change

    OpenAIRE

    Hansen, G; Stone, D

    2016-01-01

    © 2016 Macmillan Publishers Limited. All rights reserved. Impacts of recent regional changes in climate on natural and human systems are documented across the globe, yet studies explicitly linking these observations to anthropogenic forcing of the climate are scarce. Here we provide a systematic assessment of the role of anthropogenic climate change for the range of impacts of regional climate trends reported in the IPCC's Fifth Assessment Report. We find that almost two-thirds of the impacts...

  6. Health impact assessment in environmental impact assessment in China: Status, practice and problems

    International Nuclear Information System (INIS)

    Chang, I-Shin; Yilihamu, Qimanguli; Wu, Jing; Wu, Huilei; Nan, Bo

    2017-01-01

    In China, the environmental impact assessment (EIA) system has gradually developed into an integrated evaluation system, owing to continuous improvement on institutional framework, system infrastructure, technical methods and professionals training, since EIA was first introduced in 1979. Though health impact assessment (HIA) is a part of the EIA system, the development of HIA is so slow as to remain at the early developing stage. This research aims to understand the extent and main issues concerning “health considerations” under the context of EIA, in China. Through case study on 42 environmental impact statements, the results demonstrate that HIA was not implemented in most of the cases, and health issues were not even mentioned in more than half of these cases. Where HIA was implemented, various problems were revealed through this study, including lacks of systematic approaching tools, insufficient supporting data on health effects, ineffective public participation, limited health considerations on biophysics, and so forth. Nevertheless, these problems can be attributed to lacks of legal supports, systematic evaluation methods, knowledge on evaluation technologies, and professional training institutions for HIA in China. In order to improve HIA methodologies, technologies, and management, to perfect HIA evaluation system, and to enhance public participation system within HIA, some recommendations from institutional, technical, administrative, and managerial aspects were then proposed in this study. - Highlights: •The status and deficiencies of HIA in EIA in China were identified and evaluated. •There were great industrial differences for the implementation of HIA in EIA. •Public participation was not well executed within HIA in EIA.

  7. Industrial Assessment Center Program Impact Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Martin, M.A.

    2000-01-26

    This report presents the results of an evaluation of the U.S. Department of Energy's Industrial Assessment Center (IAC) Program. The purpose of this program is to conduct energy, waste, and productivity assessments for small to medium-sized industrial firms. Assessments are conducted by 30 university-based industrial assessment centers. The purpose of this project was to evaluate energy and cost savings attributable to the assessments, the trained alumni, and the Websites sponsored by this program. How IAC assessments, alumni, and Web-based information may influence industrial energy efficiency decision making was also studied. It is concluded that appreciable energy and cost savings may be attributed to the IAC Program and that the IAC Program has resulted in more active and improved energy-efficiency decision making by industrial firms.

  8. Assessment of impact due to entrainment of ichthyoplankton

    International Nuclear Information System (INIS)

    Horst, T.J.

    1975-01-01

    Three approaches to the assessment of impact associated with the entrainment of ichthyoplankton into power stations are discussed. The first is the estimation of the probability of mortality for those organisms entrained. The second is the assessment to the fish populations which have the egg and larvae life stages entrained. The third approach is the assessment of impact to the community or ecosystem. Some models are presented as examples for each of the three approaches. (U.S.)

  9. A qualitative method proposal to improve environmental impact assessment

    Energy Technology Data Exchange (ETDEWEB)

    Toro, Javier, E-mail: jjtoroca@unal.edu.co [Institute of Environmental Studies, National University of Colombia at Bogotá (Colombia); Requena, Ignacio, E-mail: requena@decsai.ugr.es [Department of Computer Science and Artificial Intelligence, University of Granada (Spain); Duarte, Oscar, E-mail: ogduartev@unal.edu.co [National University of Colombia at Bogotá, Department of Electrical Engineering and Electronics (Colombia); Zamorano, Montserrat, E-mail: zamorano@ugr.es [Department of Civil Engineering, University of Granada (Spain)

    2013-11-15

    In environmental impact assessment, qualitative methods are used because they are versatile and easy to apply. This methodology is based on the evaluation of the strength of the impact by grading a series of qualitative attributes that can be manipulated by the evaluator. The results thus obtained are not objective, and all too often impacts are eliminated that should be mitigated with corrective measures. However, qualitative methodology can be improved if the calculation of Impact Importance is based on the characteristics of environmental factors and project activities instead on indicators assessed by evaluators. In this sense, this paper proposes the inclusion of the vulnerability of environmental factors and the potential environmental impact of project activities. For this purpose, the study described in this paper defined Total Impact Importance and specified a quantification procedure. The results obtained in the case study of oil drilling in Colombia reflect greater objectivity in the evaluation of impacts as well as a positive correlation between impact values, the environmental characteristics at and near the project location, and the technical characteristics of project activities. -- Highlights: • Concept of vulnerability has been used to calculate the importance impact assessment. • This paper defined Total Impact Importance and specified a quantification procedure. • The method includes the characteristics of environmental and project activities. • The application has shown greater objectivity in the evaluation of impacts. • Better correlation between impact values, environment and the project has been shown.

  10. A qualitative method proposal to improve environmental impact assessment

    International Nuclear Information System (INIS)

    Toro, Javier; Requena, Ignacio; Duarte, Oscar; Zamorano, Montserrat

    2013-01-01

    In environmental impact assessment, qualitative methods are used because they are versatile and easy to apply. This methodology is based on the evaluation of the strength of the impact by grading a series of qualitative attributes that can be manipulated by the evaluator. The results thus obtained are not objective, and all too often impacts are eliminated that should be mitigated with corrective measures. However, qualitative methodology can be improved if the calculation of Impact Importance is based on the characteristics of environmental factors and project activities instead on indicators assessed by evaluators. In this sense, this paper proposes the inclusion of the vulnerability of environmental factors and the potential environmental impact of project activities. For this purpose, the study described in this paper defined Total Impact Importance and specified a quantification procedure. The results obtained in the case study of oil drilling in Colombia reflect greater objectivity in the evaluation of impacts as well as a positive correlation between impact values, the environmental characteristics at and near the project location, and the technical characteristics of project activities. -- Highlights: • Concept of vulnerability has been used to calculate the importance impact assessment. • This paper defined Total Impact Importance and specified a quantification procedure. • The method includes the characteristics of environmental and project activities. • The application has shown greater objectivity in the evaluation of impacts. • Better correlation between impact values, environment and the project has been shown

  11. Assessing social impacts in urban waterfront regeneration

    International Nuclear Information System (INIS)

    Sairinen, Rauno; Kumpulainen, Satu

    2006-01-01

    The target of this article is to identify the social impacts of urban waterfront regeneration. For this purpose, four different dimensions of social impacts in urban waterfront planning are presented: resources and identity, social status, access and activities and waterfront experience. The four social dimensions refer to the different ways of experiencing and using the edges of the sea, lake or river to make an understanding of their qualities to the community. The contents of this typology are illustrated by analysing some basic features of three different newly built waterfront areas in Helsinki. The article is based on post-evaluation

  12. ASSESSMENT OF IMPACT DAMAGE TO APPLE FRUITS

    African Journals Online (AJOL)

    2013-03-01

    Mar 1, 2013 ... measured in terms of bruise diameter is highly influenced by the drop height. ... other, packaging containers, parts of processing equip- ment and the tree. During ... Where E is the impact energy, m is the mass of the fruit, g is ...

  13. Comparative study of environmental impact assessment methods ...

    African Journals Online (AJOL)

    This study aims to introduce and systematically investigate the environmental issues during important decision-making stages. Meanwhile, impacts of development on the environmental components will be also analyzed. This research studies various methods of predicting the environmental changes and determining the ...

  14. Assessing air quality impacts of managed lanes.

    Science.gov (United States)

    2010-12-01

    Impacts on transit bus performance and air quality were investigated for a case study high-occupancy / toll (HOT) lane project on a corridor of I-95 near Miami. Trends in air pollutant concentration monitoring data in the study area first were analyz...

  15. In Brief: Impacts of wind energy assessed

    Science.gov (United States)

    Zielinski, Sarah

    2007-05-01

    By 2020, greater use of wind energy could reduce carbon dioxide emissions by the U.S. energy sector by about 4.5%. However, greater effort is needed to address potentially negative impacts of this growing energy source, according to a new report from a committee of the U.S. National Research Council. Potential impacts of wind energy projects include deaths of birds and bats, reduced value of property located near a turbine, and habitat loss and fragmentation. However, because these are generally local projects, there is little information available to determine the cumulative effects of wind turbines over a whole region. The report makes several recommendations on how to improve regulation at the local, state, and federal levels. The report also sets out a guide for evaluating wind-energy projects, which includes questions about potential environmental, economic, cultural, and aesthetic impacts. The report, ``Environmental Impacts of Wind-Energy Projects,'' is available at http://books.nap.edu/catalog.php?record_id=11935

  16. Applicable international environmental impact assessment laws for ...

    African Journals Online (AJOL)

    The Niger Delta Area of Nigeria has undergone several alterations in her environment through various projects development including oil and gas exploration, dredging and mining activities. These activities have continued to impact the environment as relevant organs of the government deliberately down play the ...

  17. LCA of contaminated site remediation - integration of site-specific impact assessment of local toxic impacts

    DEFF Research Database (Denmark)

    Lemming, Gitte; Hauschild, Michael Zwicky; Chambon, Julie Claire Claudia

    2011-01-01

    impacts have typically been assessed using site-generic characterization models representing a continental scale and excluding the groundwater compartment. Soil contaminants have therefore generally been assigned as emissions to surface soil or surface water compartments. However, such site-generic...... assessments poorly reflect the fate of frequent soil contaminants such as chloroethenes as they exclude the groundwater compartment and assume that the main part escapes to the atmosphere. Another important limitation of the generic impact assessment models is that they do not include the formation......The environmental impacts from remediation can be divided into primary and secondary impacts. Primary impacts cover the local impacts associated with the on-site contamination, whereas the secondary impacts are impacts on the local, regional and global scale generated by the remediation activities...

  18. Life cycle assessment Part 2 : Current impact assessment practice

    NARCIS (Netherlands)

    Pennington, D.W; Potting, J; Finnveden, G; Lindeijer, E; Jolliet, O; Rydberg, T.; Rebitzer, G.

    Providing our society with goods and services contributes to a wide range of environmental impacts. Waste generation, emissions and the consumption of resources occur at many stages in a product's life cycle-from raw material extraction, energy acquisition, production and manufacturing, use, reuse,

  19. Environmental impact assessment of rail infrastructure.

    Science.gov (United States)

    2016-01-29

    This project resulted in three products: a comprehensive "Sustainable Rail Checklist," a rail planning GIS database, and a web GIS tool that integrates sustainability metrics and facilitates a rapid assessment before a formal NEPA process is implemen...

  20. Assessment of Containment Structures Against Missile Impact Threats

    Institute of Scientific and Technical Information of China (English)

    LI Q M

    2006-01-01

    In order to ensure the highest safety requirements,nuclear power plant structures (the containment structures,the fuel storages and transportation systems) should be assessed against all possible internal and external impact threats.The internal impact threats include kinetic missiles generated by the failure of high pressure vessels and pipes,the failure of high speed rotating machineries and accidental drops.The external impact threats may come from airborne missiles,aircraft impact,explosion blast and fragments.The impact effects of these threats on concrete and steel structures in a nuclear power plant are discussed.Methods and procedures for the impact assessment of nuclear power plants are introduced.Recent studies on penetration and perforation mechanics as well as progresses on dynamic properties of concrete-like materials are presented to increase the understanding of the impact effects on concrete containment structures.

  1. 10 CFR 50.150 - Aircraft impact assessment.

    Science.gov (United States)

    2010-01-01

    ... maintained. (2) Aircraft impact characteristics.1 The assessment must be based on the beyond-design-basis... capabilities identified in paragraph (a)(1) of this section meet the assessment requirements in paragraph (a)(1... modified design features and functional capabilities continue to meet the assessment requirements in...

  2. Quantitative health impact assessment: current practice and future directions

    NARCIS (Netherlands)

    J.L. Veerman (Lennert); J.J.M. Barendregt (Jan); J.P. Mackenbach (Johan)

    2005-01-01

    textabstractSTUDY OBJECTIVE: To assess what methods are used in quantitative health impact assessment (HIA), and to identify areas for future research and development. DESIGN: HIA reports were assessed for (1) methods used to quantify effects of policy on determinants of health

  3. Discussion of some issues in assessing nuclear and radiation environmental impacts and in related assessment

    International Nuclear Information System (INIS)

    Pan Ziqiang

    1998-01-01

    The author discusses some noticeable issues in drafting assessment report of nuclear and radiation environmental impacts and relevant aspects needed to be considered from the point of view of comprehensive environmental assessment. The considerable issue are principles of radioactive waste management, optimization of radiation protection and collective dose, and uncertainty of the assessment. Implementing reporting system on assessment of nuclear and radiation environmental impacts would improve environmental protection for nuclear and radiation facilities. However, trade's, regional , country and global assessment of environmental impacts has to be enhanced. For this purpose, it is necessary to develop methodology of qualitative and quantitative comprehensive assessment

  4. Geomorphological hazards and environmental impact: Assessment and mapping

    Science.gov (United States)

    Panizza, Mario

    In five sections the author develops the methods for the integration of geomorphological concepts into Environmental Impact and Mapping. The first section introduces the concepts of Impact and Risk through the relationships between Geomorphological Environment and Anthropical Element. The second section proposes a methodology for the determination of Geomorphological Hazard and the identification of Geomorphological Risk. The third section synthesizes the procedure for the compilation of a Geomorphological Hazards Map. The fourth section outlines the concepts of Geomorphological Resource Assessment for the analysis of the Environmental Impact. The fifth section considers the contribution of geomorphological studies and mapping in the procedure for Environmental Impact Assessment.

  5. AN OVERVIEW OF SWEDISH RESEARCH ON IMPACT ASSESSMENT

    OpenAIRE

    CHARLOTTA FAITH-ELL

    2015-01-01

    This statement aims at giving an overview of the research on impact assessment in Sweden. It takes a point of departure at the introduction of impact assessment in 1991 describing the Swedish research until today. Since the introduction of EIA in the Swedish legislation in the 1990s, a large number of PhD dissertations have been dealing with various aspects of impact assessment. An estimation based on the literature search is that about 20 PhD theses, in which the core of the research is rela...

  6. Comparative Testing for Corporate Impact Assessment Tools

    DEFF Research Database (Denmark)

    Farsang, Andrea; Reisch, Lucia A.

    of our study are: poverty, water and sanitation, education, food and agriculture, climate change, and human rights in three industries, namely: footwear, coffee, and paper and pulp. The paper develops a protocol for the selection and quantification of indicators that can be used in selecting...... the appropriate tools for measuring impacts in the selected sectors on SDGs. Background: In the Global Value Project, a long list of indicators was compiled covering the main thematic areas and challenges of sustainability. In a second step, this long list was reduced using predefined criteria as well as other...... criteria, such as the feasibility and scalability of different tools. As a result, a protocol was developed to help compare the different tools that measure corporate impact and to interpret the results in relation to the SDGs. The protocol was pre-tested with a limited number of tools in two case studies...

  7. Chinese life cycle impact assessment factors.

    Science.gov (United States)

    Yang, J X; Nielsen, P H

    2001-04-01

    The methodological basis and procedures for determination of Chinese normalization references and weighting factors according to the EDIP-method is described. According to Chinese industrial development intensity and population density, China was divided into three regions and the normalization references for each region were calculated on the basis of an inventory of all of the region's environmental emissions in 1990. The normalization reference was determined as the total environmental impact potential for the area in question in 1990 (EP(j)90) divided by the population. The weighting factor was determined as the normalization reference (ER(j)90) divided by society's target contribution in the year 2000 based on Chinese political reduction plans, ER(j)T2000. This paper presents and discuss results obtained for eight different environmental impact categories relevant for China: global warming, stratospheric ozone depletion, acidification, nutrient enrichment, photochemical ozone formation and generation of bulk waste, hazardous waste and slag and ashes.

  8. Methodology of impact assessment of research projects

    International Nuclear Information System (INIS)

    Rodriguez Cardona, R.; Cobas Aranda, M.

    2014-01-01

    In the context of the management of research projects development it is necessary to have tools to monitor and evaluate progress and the performance of the projects, as well as their results and the impact on society (international agencies of the United Nations and the States 2002 and 2005 Paris Declaration), with the objective of to ensure their contribution to the social and economic development of countries. Many organizations, agencies and Governments apply different methodologies (IDB, World Bank, UNDP, ECLAC, UNESCO; UNICEF, Canada, Japan, other) for these purposes. In the results-based project management system not only paramount is the process or product itself, but also the result or impact of the project (if the program/project produced the effects desired persons, households and institutions and whether those effects are attributable to the intervention of the program / project). The work shows a methodology that allows for a qualitative and quantitative evaluation of impact of research projects and has been result of experience in project management of international collaboration with the International Agency for Atomic Energy (IAEA) and the Cuban Nuclear programme. (author)

  9. Handbook for value-impact assessments of NRC regulatory actions

    International Nuclear Information System (INIS)

    Mullen, M.F.; DiPalo, A.J.

    1985-01-01

    According to current Nuclear Regulatory Commission (NRC) procedures, value-impact (cost-benefit) assessments must be prepared for all rulemaking actions and for a broad range of other regulatory requirements and guidance. Probabilistic risk assessment (PRA) methods furnish an important part of the information base for these assessments. PRA methods are frequently the principal quantitative tool for estimating the benefits (e.g., public risk reduction) of proposed regulatory actions. In December 1983, the NRC published A Handbook for Value-Impact Assessment, NUREG/CR-3568, which provides a set of systematic procedures for performing value-impact assessments. The Handbook contains methods, data, and sources of information that can assist the regulatory analyst in conducting such assessments. The use of probabilistic risk analysis to estimate the benefits of proposed regulatory actions is described. Procedures and methods are also given for evaluating the costs and other consequences associated with regulatory actions. The Handbook has been adopted by the NRC as the recommended guideline for value impact assessments. This paper presents the background, objectives, and scope of the Handbook, describes the value-impact assessment methods (including the use of probabilistic risk assessment to estimate benefits), and discusses a selection of current and planned applications, with examples to illustrate how the methods are used

  10. Capacity assessment of concrete containment vessels subjected to aircraft impact

    International Nuclear Information System (INIS)

    Andonov, Anton; Kostov, Marin; Iliev, Alexander

    2015-01-01

    Highlights: • An approach to assess the containment capacity to aircraft impact via fragility curves is proposed. • Momentum over Area was defined as most suitable reference parameter to describe the aircraft load. • The effect of the impact induced damages on the containment pressure capacity has been studied. • The studied containment shows no reduction of the pressure capacity for the investigated scenarios. • The effectiveness of innovative protective structure against aircraft impact has been evaluated. - Abstract: The paper describes the procedure and the results from the assessment of the vulnerability of a generic pre-stressed containment structure subjected to a large commercial aircraft impact. Impacts of Boeing 737, Boeing 767 and Boeing 747 have been considered. The containment vulnerability is expressed by fragility curves based on the results of a number of nonlinear dynamic analyses. Three reference parameters have been considered as impact intensity measure in the fragility curve definition: peak impact force (PIF), peak impact pressure (PIP) and Momentum over Area (MoA). Conclusions on the most suitable reference parameter as well on the vulnerability of such containment vessels are drawn. The influence of the aircraft impact induced damages on the containment ultimate pressure capacity is also assessed and some preliminary conclusions on this are drawn. The paper also addresses a conceptual design of a protective structure able to decrease the containment vulnerability and provide a preliminary assessment of the applicability of such concept.

  11. Capacity assessment of concrete containment vessels subjected to aircraft impact

    Energy Technology Data Exchange (ETDEWEB)

    Andonov, Anton, E-mail: anton.andonov@mottmac.com; Kostov, Marin; Iliev, Alexander

    2015-12-15

    Highlights: • An approach to assess the containment capacity to aircraft impact via fragility curves is proposed. • Momentum over Area was defined as most suitable reference parameter to describe the aircraft load. • The effect of the impact induced damages on the containment pressure capacity has been studied. • The studied containment shows no reduction of the pressure capacity for the investigated scenarios. • The effectiveness of innovative protective structure against aircraft impact has been evaluated. - Abstract: The paper describes the procedure and the results from the assessment of the vulnerability of a generic pre-stressed containment structure subjected to a large commercial aircraft impact. Impacts of Boeing 737, Boeing 767 and Boeing 747 have been considered. The containment vulnerability is expressed by fragility curves based on the results of a number of nonlinear dynamic analyses. Three reference parameters have been considered as impact intensity measure in the fragility curve definition: peak impact force (PIF), peak impact pressure (PIP) and Momentum over Area (MoA). Conclusions on the most suitable reference parameter as well on the vulnerability of such containment vessels are drawn. The influence of the aircraft impact induced damages on the containment ultimate pressure capacity is also assessed and some preliminary conclusions on this are drawn. The paper also addresses a conceptual design of a protective structure able to decrease the containment vulnerability and provide a preliminary assessment of the applicability of such concept.

  12. The environmental impact assessment of uranium mining in Australia

    International Nuclear Information System (INIS)

    Morvell, G.

    2002-01-01

    Federal environmental impact assessment legislation has existed in Australia since 1974. A number of uranium mines have been developed in this time, utilizing a range of mining techniques, including opencut, underground and in-situ leach. Projects have also been undertaken in a variety of geographical areas requiring consideration of diverse biodiversity, cultural heritage and social impact issues. Assessment of uranium mining proposals in Australia is also conducted in a climate of political opposition from a cross section of the Australian community. This paper outlines some of the key issues that arose during recent assessments and which provide a lead to the role of environmental impact assessment in environmental policy development. Issues are also relevant to recent assessments on a replacement nuclear reactor, shipments of waste for reprocessing and proposed assessments on proposals for low and intermediate level nuclear waste facilities. (author)

  13. Integrating Fuzzy Logic, Optimization, and GIS for Ecological Impact Assessments

    Science.gov (United States)

    Bojórquez-Tapia, Luis A.; Juárez, Lourdes; Cruz-Bello, Gustavo

    2002-09-01

    Appraisal of ecological impacts has been problematic because of the behavior of ecological system and the responses of these systems to human intervention are far from fully understood. While it has been relatively easy to itemize the potential ecological impacts, it has been difficult to arrive at accurate predictions of how these impacts affect populations, communities, or ecosystems. Furthermore, the spatial heterogeneity of ecological systems has been overlooked because its examination is practically impossible through matrix techniques, the most commonly used impact assessment approach. Besides, the public has become increasingly aware of the importance of the EIA in decision-making and thus the interpretation of impact significance is complicated further by the different value judgments of stakeholders. Moreover, impact assessments are carried out with a minimum of data, high uncertainty, and poor conceptual understanding. Hence, the evaluation of ecological impacts entails the integration of subjective and often conflicting judgments from a variety of experts and stakeholders. The purpose of this paper is to present an environmental impact assessment approach based on the integration fuzzy logic, geographical information systems and optimization techniques. This approach enables environmental analysts to deal with the intrinsic imprecision and ambiguity associated with the judgments of experts and stakeholders, the description of ecological systems, and the prediction of ecological impacts. The application of this approach is illustrated through an example, which shows how consensus about impact mitigation can be attained within a conflict resolution framework.

  14. Economic impact assessment in pest risk analysis

    NARCIS (Netherlands)

    Soliman, T.A.A.; Mourits, M.C.M.; Oude Lansink, A.G.J.M.; Werf, van der W.

    2010-01-01

    According to international treaties, phytosanitary measures against introduction and spread of invasive plant pests must be justified by a science-based pest risk analysis (PRA). Part of the PRA consists of an assessment of potential economic consequences. This paper evaluates the main available

  15. assessing climate change impacts on river hydrology

    Indian Academy of Sciences (India)

    71

    model, Soil and Water Assessment Tool (SWAT), in order to evaluate the effect of climate. 24 change on rainfall ... to project future climate data based on the CO2 emission scenarios.The RCMs are of finer ..... Springer Science+Business. 2.

  16. Chinese life cycle impact assessment factors

    DEFF Research Database (Denmark)

    Yang, Jianxin; Nielsen, Per Henning

    2001-01-01

    The methodological basis and procedures for determination of Chinese normalization references and weighting factors according to the EDIP-method is described. According to Chinese industrial development intensity and population density, China was divided into three regions and the normalization...... was determined as the normalization reference (ER ( j)90) divided by society's target contribution in the year 2000 abased on Chinese political reduction plans, ER ( j)(T2000). This paper presents and discuss results obtained for eight different environmental impact categories relevant for China: global warming...

  17. Environmental impact assessment applied to planning activities

    International Nuclear Information System (INIS)

    Vismara, R.

    1994-01-01

    Object of EEC (European Economic Community) directive and italian law are certain public and private projects. However, more recent tendency are moving to an application on planning action too. There is no doubt that EIA (Environmental Impact Analysis) on project is very different than EIA on plans. Obviously EIA on a sectorial plan is not an addition of singular EIA on project. The new main objectives shall be: identification of critical areas; identification of interaction between different projects and between different factors; identification of critical project. A methodology to quantify these objectives in matricial form is presented

  18. Assessing the social impacts of the biofuel lifecycle

    DEFF Research Database (Denmark)

    Jørgensen, Andreas; Hauschild, Michael Zwicky

    In order to assess the social impacts of the biofuel lifecycle, Social Life Cycle Assessment (SLCA) may be a promising tool. However, as this review study points out, several problems are still to be solved. SLCA can be defined as a tool for assessing a product’s or service’s total impact on human...... health and well-being throughout its life cycle. During the recent years several different approaches towards SLCA have been developing. This review reveals a broad variety in how the SLCAs address all methodological steps. One of the main differences is in the choice and formulation of social indicators....... The indicators address a wide variety of issues; some approaches focus on impacts created in the very close proximity of the processes included in the product system, whereas others focus on the more remote societal consequences. The perception of social impacts is thus very varying. An assessment focussing...

  19. Assessment of human impacts on landuse and vegetation cover ...

    African Journals Online (AJOL)

    Assessment of human impacts on landuse and vegetation cover changes in Mubi region, Adamawa state, Nigeria; remote sensing and GIS approach. ... Global Journal of Environmental Sciences. Journal Home · ABOUT THIS JOURNAL ...

  20. Environmental impact assessment of conventional and organic milk production

    NARCIS (Netherlands)

    Boer, de I.J.M.

    2003-01-01

    Organic agriculture addresses the public demand to diminish environmental pollution of agricultural production. Until now, however, only few studies tried to determine the integrated environmental impact of conventional versus organic production using life cycle assessment (LCA). The aim of this

  1. Assessment of the impact of point source pollution from the ...

    African Journals Online (AJOL)

    Assessment of the impact of point source pollution from the Keiskammahoek Sewage ... Water SA. Journal Home · ABOUT THIS JOURNAL · Advanced Search ... Also, significant pollution of the receiving Keiskamma River was indicated for ...

  2. Assessment on the impact of plasma television implementation on ...

    African Journals Online (AJOL)

    Assessment on the impact of plasma television implementation on the teaching learning process of mathematics class: the case on selected practicum sites (high schools) for education faculty of Jimma University.

  3. Towards improved socio-economic assessments of ocean acidification's impacts.

    Science.gov (United States)

    Hilmi, Nathalie; Allemand, Denis; Dupont, Sam; Safa, Alain; Haraldsson, Gunnar; Nunes, Paulo A L D; Moore, Chris; Hattam, Caroline; Reynaud, Stéphanie; Hall-Spencer, Jason M; Fine, Maoz; Turley, Carol; Jeffree, Ross; Orr, James; Munday, Philip L; Cooley, Sarah R

    2013-01-01

    Ocean acidification is increasingly recognized as a component of global change that could have a wide range of impacts on marine organisms, the ecosystems they live in, and the goods and services they provide humankind. Assessment of these potential socio-economic impacts requires integrated efforts between biologists, chemists, oceanographers, economists and social scientists. But because ocean acidification is a new research area, significant knowledge gaps are preventing economists from estimating its welfare impacts. For instance, economic data on the impact of ocean acidification on significant markets such as fisheries, aquaculture and tourism are very limited (if not non-existent), and non-market valuation studies on this topic are not yet available. Our paper summarizes the current understanding of future OA impacts and sets out what further information is required for economists to assess socio-economic impacts of ocean acidification. Our aim is to provide clear directions for multidisciplinary collaborative research.

  4. Assessment of MEGA BORG impacts on sea turtles

    International Nuclear Information System (INIS)

    Gitschlag, G.

    1993-01-01

    Studies were conducted to assess the impacts of the MEGA BORG oil spill on sea turtles in the path of the oil plume. Aerial surveys were performed to determine the presence of turtles and provide a gross visual assessment of potential impacts. Although extensive efforts were made to capture sea turtles around oil and gas platforms only one loggerhead sea turtle, Caretta caretta, was captured. Neither external visual inspection nor laboratory fecal analysis showed evidence of petroleum contamination

  5. Assessment of impact noise at 31.5Hz

    NARCIS (Netherlands)

    Lentzen, S.S.K.; Koopman, A.; Salomons, E.M.

    2011-01-01

    Due to the increasing popularity of lightweight building methods, vibrations and low frequency noise have become a greater challenge. This work deals with the assessment of impact noise at the 31.5 Hz octave band. Three possible impact sound sources to determine the sound insulation have been tested

  6. Assessing the observed impact of anthropogenic climate change

    NARCIS (Netherlands)

    Hansen, G.E.

    2015-01-01

    Assessing the observed impact of anthropogenic climate change

    Gerrit Hansen

    Global climate change is unequivocal, and greenhouse gas emissions continue rising despite international mitigation efforts. Hence whether and to what extent the impacts of human induced

  7. Assessing hydrological impacts of tree-based bioenergy feedstock

    CSIR Research Space (South Africa)

    Gush, Mark B

    2010-01-01

    Full Text Available This chapter provides a methodology for assessing the hydrological impacts of tree-based bioenergy feedstock. Based on experience gained in South Africa, it discusses the tasks required to reach an understanding of the likely water resource impacts...

  8. An Assessment of the Impact of the Mentoring Programme on ...

    African Journals Online (AJOL)

    Using Margaret Archer's morphogenetic framework, this paper seeks to assess the impact ... The key question asked in this study is: 'What impact has the mentoring ... The pass rate improved from 80% to 92% the first time the programme was ...

  9. Environmental impact assessment based on planning support system

    NARCIS (Netherlands)

    Carsjens, G.J.; Chen, W.

    2011-01-01

    How to assess environmental impact is one of the keys in land use planning. This article described in detail the concepts of activities, impact zones, functions, and sensitivities, as well as the development of STEPP (strategic tool for integrating environmental aspects in planning procedures) based

  10. 40 CFR 227.19 - Assessment of impact.

    Science.gov (United States)

    2010-07-01

    ..., reduction in use days of recreational areas, or dollars lost in commercial fishery profits or the... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Assessment of impact. 227.19 Section... FOR THE EVALUATION OF PERMIT APPLICATIONS FOR OCEAN DUMPING OF MATERIALS Impact of the Proposed...

  11. Risk analysis within environmental impact assessment of proposed construction activity

    Energy Technology Data Exchange (ETDEWEB)

    Zeleňáková, Martina; Zvijáková, Lenka

    2017-01-15

    Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

  12. Risk analysis within environmental impact assessment of proposed construction activity

    International Nuclear Information System (INIS)

    Zeleňáková, Martina; Zvijáková, Lenka

    2017-01-01

    Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

  13. Potential Impacts of Food Production on Freshwater Availability Considering Water Sources

    Directory of Open Access Journals (Sweden)

    Shinjiro Yano

    2016-04-01

    Full Text Available We quantify the potential impacts of global food production on freshwater availability (water scarcity footprint; WSF by applying the water unavailability factor (fwua as a characterization factor and a global water resource model based on life cycle impact assessment (LCIA. Each water source, including rainfall, surface water, and groundwater, has a distinct fwua that is estimated based on the renewability rate of each geographical water cycle. The aggregated consumptive water use level for food production (water footprint inventory; WI was found to be 4344 km3/year, and the calculated global total WSF was 18,031 km3 H2Oeq/year, when considering the difference in water sources. According to the fwua concept, which is based on the land area required to obtain a unit volume of water from each source, the calculated annual impact can also be represented as 98.5 × 106 km2. This value implies that current agricultural activities requires a land area that is over six times larger than global total cropland. We also present the net import of the WI and WSF, highlighting the importance of quantitative assessments for utilizing global water resources to achieve sustainable water use globally.

  14. Evaluating the environmental sustainability of energy crops: A life cycle assessment of Spanish rapeseed and Argentinean soybean cultivation

    Directory of Open Access Journals (Sweden)

    Francisca Fernández-Tirado

    2017-04-01

    Full Text Available Rapeseed oil is expected to be increasingly used in Spain as raw material to produce biodiesel to the detriment of extra-EU imports of biodiesel mainly based on soybean oil from Argentina. Therefore, the environmental impacts produced throughout the life cycle of energy crops used to produce biodiesel which is consumed in Spain could be radically affected. In this context, the environmental impacts of rapeseed cultivation in Spain and soybean cultivation in Argentina, were compared under certain growing conditions using Life Cycle Assessment (LCA. Two methods of calculation for Life Cycle Impact Assessment (LCIA and two functional units (FUs were used to test potential biases. The results showed that the cultivation of soybean in Argentina had, in general, fewer environmental impacts than rapeseed cultivation in Spain when the FU was the area of cultivation, but these findings are inverted when the analysis is conducted according to the energy content of the biodiesel obtained from these crops. Soybean in fact has very low oil content, meaning that larger areas of land are required to obtain the same amount of biodiesel and that consequently it has a higher environmental impact by energy content. Fertilization was, in general, the process that generated the greatest environmental burdens, and is an area in which improvement is necessary in order to increase sustainability, particularly with regard to Spanish rapeseed.

  15. Evaluating the environmental sustainability of energy crops: A life cycle assessment of Spanish rapeseed and Argentinean soybean cultivation

    International Nuclear Information System (INIS)

    Fernández-Tirado, F.; Parra-López, C.; Romero-Gámez, M.

    2017-01-01

    Rapeseed oil is expected to be increasingly used in Spain as raw material to produce biodiesel to the detriment of extra-EU imports of biodiesel mainly based on soybean oil from Argentina. Therefore, the environmental impacts produced throughout the life cycle of energy crops used to produce biodiesel which is consumed in Spain could be radically affected. In this context, the environmental impacts of rapeseed cultivation in Spain and soybean cultivation in Argentina, were compared under certain growing conditions using Life Cycle Assessment (LCA). Two methods of calculation for Life Cycle Impact Assessment (LCIA) and two functional units (FUs) were used to test potential biases. The results showed that the cultivation of soybean in Argentina had, in general, fewer environmental impacts than rapeseed cultivation in Spain when the FU was the area of cultivation, but these findings are inverted when the analysis is conducted according to the energy content of the biodiesel obtained from these crops. Soybean in fact has very low oil content, meaning that larger areas of land are required to obtain the same amount of biodiesel and that consequently it has a higher environmental impact by energy content. Fertilization was, in general, the process that generated the greatest environmental burdens, and is an area in which improvement is necessary in order to increase sustainability, particularly with regard to Spanish rapeseed.

  16. Evaluating the environmental sustainability of energy crops: A life cycle assessment of Spanish rapeseed and Argentinean soybean cultivation

    Energy Technology Data Exchange (ETDEWEB)

    Fernández-Tirado, F.; Parra-López, C.; Romero-Gámez, M.

    2017-09-01

    Rapeseed oil is expected to be increasingly used in Spain as raw material to produce biodiesel to the detriment of extra-EU imports of biodiesel mainly based on soybean oil from Argentina. Therefore, the environmental impacts produced throughout the life cycle of energy crops used to produce biodiesel which is consumed in Spain could be radically affected. In this context, the environmental impacts of rapeseed cultivation in Spain and soybean cultivation in Argentina, were compared under certain growing conditions using Life Cycle Assessment (LCA). Two methods of calculation for Life Cycle Impact Assessment (LCIA) and two functional units (FUs) were used to test potential biases. The results showed that the cultivation of soybean in Argentina had, in general, fewer environmental impacts than rapeseed cultivation in Spain when the FU was the area of cultivation, but these findings are inverted when the analysis is conducted according to the energy content of the biodiesel obtained from these crops. Soybean in fact has very low oil content, meaning that larger areas of land are required to obtain the same amount of biodiesel and that consequently it has a higher environmental impact by energy content. Fertilization was, in general, the process that generated the greatest environmental burdens, and is an area in which improvement is necessary in order to increase sustainability, particularly with regard to Spanish rapeseed.

  17. Methods for land use impact assessment: A review

    International Nuclear Information System (INIS)

    Perminova, Tataina; Sirina, Natalia; Laratte, Bertrand; Baranovskaya, Natalia; Rikhvanov, Leonid

    2016-01-01

    Many types of methods to assess land use impact have been developed. Nevertheless a systematic synthesis of all these approaches is necessary to highlight the most commonly used and most effective methods. Given the growing interest in this area of research, a review of the different methods of assessing land use impact (LUI) was performed using bibliometric analysis. One hundred eighty seven articles of agricultural and biological science, and environmental sciences were examined. According to our results, the most frequently used land use assessment methods are Life-Cycle Assessment, Material Flow Analysis/Input–Output Analysis, Environmental Impact Assessment and Ecological Footprint. Comparison of the methods allowed their specific features to be identified and to arrive at the conclusion that a combination of several methods is the best basis for a comprehensive analysis of land use impact assessment. - Highlights: • We identified the most frequently used methods in land use impact assessment. • A comparison of the methods based on several criteria was carried out. • Agricultural land use is by far the most common area of study within the methods. • Incentive driven methods, like LCA, arouse the most interest in this field.

  18. Methods for land use impact assessment: A review

    Energy Technology Data Exchange (ETDEWEB)

    Perminova, Tataina, E-mail: tatiana.perminova@utt.fr [Research Centre for Environmental Studies and Sustainability, University of Technology of Troyes, CNRS UMR 6281, 12 Rue Marie Curie CS 42060, F-10004 Troyes Cedex (France); Department of Geoecology and Geochemistry, Institute of Natural Resources, National Research Tomsk Polytechnic University, 30 Lenin Avenue, 634050 Tomsk (Russian Federation); Sirina, Natalia, E-mail: natalia.sirina@utt.fr [Research Centre for Environmental Studies and Sustainability, University of Technology of Troyes, CNRS UMR 6281, 12 Rue Marie Curie CS 42060, F-10004 Troyes Cedex (France); Laratte, Bertrand, E-mail: bertrand.laratte@utt.fr [Research Centre for Environmental Studies and Sustainability, University of Technology of Troyes, CNRS UMR 6281, 12 Rue Marie Curie CS 42060, F-10004 Troyes Cedex (France); Baranovskaya, Natalia, E-mail: natalya.baranovs@mail.ru [Department of Geoecology and Geochemistry, Institute of Natural Resources, National Research Tomsk Polytechnic University, 30 Lenin Avenue, 634050 Tomsk (Russian Federation); Rikhvanov, Leonid, E-mail: rikhvanov@tpu.ru [Department of Geoecology and Geochemistry, Institute of Natural Resources, National Research Tomsk Polytechnic University, 30 Lenin Avenue, 634050 Tomsk (Russian Federation)

    2016-09-15

    Many types of methods to assess land use impact have been developed. Nevertheless a systematic synthesis of all these approaches is necessary to highlight the most commonly used and most effective methods. Given the growing interest in this area of research, a review of the different methods of assessing land use impact (LUI) was performed using bibliometric analysis. One hundred eighty seven articles of agricultural and biological science, and environmental sciences were examined. According to our results, the most frequently used land use assessment methods are Life-Cycle Assessment, Material Flow Analysis/Input–Output Analysis, Environmental Impact Assessment and Ecological Footprint. Comparison of the methods allowed their specific features to be identified and to arrive at the conclusion that a combination of several methods is the best basis for a comprehensive analysis of land use impact assessment. - Highlights: • We identified the most frequently used methods in land use impact assessment. • A comparison of the methods based on several criteria was carried out. • Agricultural land use is by far the most common area of study within the methods. • Incentive driven methods, like LCA, arouse the most interest in this field.

  19. Environmental impacts assessment of industrial estate providing with managerial process

    Energy Technology Data Exchange (ETDEWEB)

    Nouri, J.; Mahvi, A.H.; Younesian, M.; Nabizadeh, R.; Hashemi, I. [Univ. of Tehran (Iran)

    2007-07-01

    The existence of balance, coordination and required order among natural elements is one of the key factors in the ecosystem. If this balance is disturbed under certain circumstances, it will damage the structure of living existences and more specifically human beings. Since a half century ago, factors such as important economical and industrial activites, advanced technologies together with growing population and lack of concordance among different couhntries to take optimal advantage of the existing natural resources have distrubed the balance in the ecosystem. As a result, man has caused many problems such as high death tolls and arduous diseases due to the different pollutions in water, air, land, sound, temperature, etc and factors such as erosion, desert, expansion, floods, extinction of plant and animal species, ozone layer destruction, global warming, sea level rise and greenhouse gases increase. Environmental Impact Assessment (EIA) is to recognize and assess systematic consequences of projects and programs on elements like physicochemical, biological, cultural, economical and social phenomena in th environment; in other words it is a way or method to determine the direction of predication and assessment of environmental impacts of activities on the environmental health of the ecosystem affecting human lives. In this study, and environmental impact assessment of the establishment of the Shahzand Industrial Estate in Arak at the central part of Iran was investigated. After collection of data and analysis of the findings, the positive and negative impacts resulting from establishment of the indutrial estate were investigated using the Leopold Matrix and Scaling checklist methods providing the managerial solutions in order to minimize the harmful environmental impacts. The existing environmental situation was investigated and then environmental impact alternatives were determined. This was done in regard to the amount and kind of predicted pollution for the

  20. Development Impact Assessment (DIA) Case Study. South Africa

    Energy Technology Data Exchange (ETDEWEB)

    Cox, Sadie [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Nawaz, Kathleen [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Sandor, Debra [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2015-05-19

    This case study reviews South Africa’s experience in considering the impacts of climate change action on development goals, focusing on the South African energy sector and development impact assessments (DIAs) that have and could be used to influence energy policy or inform the selection of energy activities. It includes a review of assessments—conducted by government ministries, technical partners, and academic institutes and non-governmental organizations (NGOs)—that consider employment, health, and water implications of possible energy sector actions, as well as multi-criteria impact assessments.

  1. Environmental Impact Assessment of Wind Generators in the Czech Republic

    Directory of Open Access Journals (Sweden)

    Vladimír Lapčík

    2008-11-01

    Full Text Available The article summarizes author´s experience with environmental impact assessment in branch of wind generators. The introductorypart of paper describes legislative obligations of the Czech Republic in frame of fulfilling the European Union´s limits in branch ofrenewable energy resources utilization. Next part of paper deals with analysis of impacts of wind generators on the environment.The final part of paper deals with experience with implementation of the environmental impact assessment process (pursuant to the ActNo. 100/2001 Coll. in the field of wind power in the Czech Republic.

  2. Environmental impact assessment in practice: A gender critique

    International Nuclear Information System (INIS)

    Kurian, P.A.; Purdue Univ., West Lafayette, IN

    1995-01-01

    The author evaluates the extent to which environmental impact assessment (EIA) as conceptualized by EIA systems is a gendered process. Through a discourse analysis of in-depth interviews with bureaucrats, technocrats, and activists involved with the Sardar Sarovar dam project in India, the author examines the practice of EIA in a Third World country. She uses a theoretical framework, informed by a theory of gender, to evaluate the interviews. In practice, EIA is marked by gender biases that ignore the gender-specific nature of impacts. Such biases distort the impact assessment process, making environmental sustainability difficult, if not impossible, to achieve

  3. Environmental impact assessments of wind energy projects: An Alberta example

    International Nuclear Information System (INIS)

    Brown, W.K.

    1993-01-01

    A description is presented of the environmental impact assessment for an Alberta windfarm, summarizing the rationale, process and results of the assessment, costs involved, and recommendations made. The Pe-kun-nee windfarm was designed as a 44 turbine, 9.9 kW windfarm. The assessment included consideration of the complete range of environmental impacts of the windfarm, including reviews of impacts associated with similar developments elsewhere. From an environmental perspective, the proposed site and transmission line route were exceedingly suitable for development. No major potential impacts were identified. Most impacts that could occur, including terrain and vegetation disturbance, were associated with the construction phase of the project. A series of mitigation measures were developed to minimize each identified impact. Monitoring during the operations phase of the development was recommended to: ensure that the revegetation of disturbed areas was adequate; verify the sound level model; and document the incidence of bird strikes. Potential aesthetic impacts were addressed through a proposed interpretive project designed to educate visitors, enhance the profile of the wind-energy industry, and provide local employment. The assessment was completed within 8 months of initiation at a cost less than $200,000

  4. Sensitivity to Uncertainty in Asteroid Impact Risk Assessment

    Science.gov (United States)

    Mathias, D.; Wheeler, L.; Prabhu, D. K.; Aftosmis, M.; Dotson, J.; Robertson, D. K.

    2015-12-01

    The Engineering Risk Assessment (ERA) team at NASA Ames Research Center is developing a physics-based impact risk model for probabilistically assessing threats from potential asteroid impacts on Earth. The model integrates probabilistic sampling of asteroid parameter ranges with physics-based analyses of entry, breakup, and impact to estimate damage areas and casualties from various impact scenarios. Assessing these threats is a highly coupled, dynamic problem involving significant uncertainties in the range of expected asteroid characteristics, how those characteristics may affect the level of damage, and the fidelity of various modeling approaches and assumptions. The presented model is used to explore the sensitivity of impact risk estimates to these uncertainties in order to gain insight into what additional data or modeling refinements are most important for producing effective, meaningful risk assessments. In the extreme cases of very small or very large impacts, the results are generally insensitive to many of the characterization and modeling assumptions. However, the nature of the sensitivity can change across moderate-sized impacts. Results will focus on the value of additional information in this critical, mid-size range, and how this additional data can support more robust mitigation decisions.

  5. 76 FR 30952 - Published Privacy Impact Assessments on the Web

    Science.gov (United States)

    2011-05-27

    ... DEPARTMENT OF HOMELAND SECURITY Office of the Secretary Published Privacy Impact Assessments on... the Department. These assessments were approved and published on the Privacy Office's web site between..., 2011 and March 31, 2011, the Chief Privacy Officer of the DHS approved and published sixteen Privacy...

  6. Environmental Methods Review: Retooling Impact Assessment for the New Century

    Science.gov (United States)

    1998-03-01

    Environmental Assessment Research Council. Netherlands, Commission for Environmental Impact Assessment. 1993. Year book of the Commission for Environmental...professional standards. Currently. the main avenues to obtain information in order to maintain or improve competence include: • journals. books ...World Wide Web • professional associations and networks such as IAIA. All of these. however. rely on using the expertise of others secondhand . Who

  7. Theory and Practice of Transboundary Environmental Impact Assessment

    NARCIS (Netherlands)

    Bastmeijer, C.J.; Koivurova, T.

    2008-01-01

    Environmental Impact Assessment (EIA) is a well-established instrument of environmental law and policy that aims to ensure that potential adverse environmental effects of human activities are assessed before decisions on such activities are made. The instrument is increasingly being applied in

  8. Environmental impact assessment of man-made cellulose fibres

    NARCIS (Netherlands)

    Shen, L.; Worrell, E.; Patel, M.K.

    2010-01-01

    Man-made cellulose fibres have played an important role in the production of textile products for more than 70 years. The purpose of this study is to assess the environmental impact of man-made cellulose fibres. Life cycle assessment (LCA) was conducted for three types of fibres (i.e. Viscose, Modal

  9. Groundwater impact assessment report for the 284-WB Powerplant Ponds

    International Nuclear Information System (INIS)

    Alexander, D.J.; Johnson, V.G.; Lindsey, K.A.

    1993-09-01

    As required by the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement Milestone M-17-00A), this report assesses the impact of wastewater discharged to the 284-WB Powerplant Ponds on groundwater quality. The assessment reported herein expands upon the initial analysis conducted between 1989 and 1990 for the Liquid Effluent Study Final Project Plan

  10. Rethinking the area of protection "natural resources" in life cycle assessment.

    Science.gov (United States)

    Dewulf, Jo; Benini, Lorenzo; Mancini, Lucia; Sala, Serenella; Blengini, Gian Andrea; Ardente, Fulvio; Recchioni, Marco; Maes, Joachim; Pant, Rana; Pennington, David

    2015-05-05

    Life cycle impact assessment (LCIA) in classical life cycle assessment (LCA) aims at analyzing potential impacts of products and services typically on three so-called areas of protection (AoPs): Natural Environment, Human Health, and Natural Resources. This paper proposes an elaboration of the AoP Natural Resources. It starts with analyzing different perspectives on Natural Resources as they are somehow sandwiched in between the Natural Environment (their cradle) and the human-industrial environment (their application). Reflecting different viewpoints, five perspectives are developed with the suggestion to select three in function of classical LCA. They result in three safeguard subjects: the Asset of Natural Resources, their Provisioning Capacity, and their role in Global Functions. Whereas the Provisioning Capacity is fully in function of humans, the global functions go beyond provisioning as they include nonprovisioning functions for humans and regulating and maintenance services for the globe as a whole, following the ecosystem services framework. A fourth and fifth safeguard subject has been identified: recognizing the role Natural Resources for human welfare, either specifically as building block in supply chains of products and services as such, either with or without their functions beyond provisioning. But as these are far broader as they in principle should include characterization of mechanisms within the human industrial society, they are considered as subjects for an integrated sustainability assessment (LCSA: life cycle sustainability assessment), that is, incorporating social, economic and environmental issues.

  11. Impact assessment and policy learning in the European Commission

    International Nuclear Information System (INIS)

    Ruddy, Thomas F.; Hilty, Lorenz M.

    2008-01-01

    Governance for sustainable development requires policy coherence and Environmental Policy Integration, which are being hindered by difficulties coordinating the two separate impact assessment processes being conducted in the European Commission. One of them, the Commission-wide Impact Assessment process, looks primarily at EU-internal impacts, whereas the other one, Sustainability Impact Assessment (SIA) in DG Trade, looks outward to other countries and intergovernmental organizations. Ideally, the two processes should complement one another, especially as the two are set to continue being done in parallel. The paper uses a case study of the reform of the European sugar regime under a World Trade Organization ruling to demonstrate how the two impact assessment processes could better complement one another. Feedback from the experience had with existing trade agreements could then promote policy learning and inform the negotiations on new agreements. The number of new bilateral and Regional Trade Agreements is expected to continue rising, thus increasing the importance of the Commission-wide Impact Assessment process required for them

  12. A statistical proposal for environmental impact assessment of development projects

    International Nuclear Information System (INIS)

    Plazas C, Julian A; De J Lema T, Alvaro; Leon P, Juan Diego

    2009-01-01

    Environmental impact assessment of development projects is a fundamental process, which main goal is to avoid that their construction and functioning, lead to serious and negative consequences on the environment. Some of the most important limitations of the models employed to assess environmental impacts, are the subjectivity of its parameters and weights, and the multicolineality among the variables, which represent high quantities of similar information. This work presents a multivariate statistical-based method that tries to diminish such limitations. For this purpose, environmental impact assessment, is valuated through different environmental impact attributes and environmental elements, synthesized in an environmental quality index (ICA in Spanish). ICA can be applied at different levels, such as at a project level, or applied only at a partial level on one or some environmental components.

  13. Evaluation of air quality and noise impact assessments, Davis Canyon

    International Nuclear Information System (INIS)

    1986-05-01

    In this report, several issues are identified regarding the air quality and noise assessments presented in the final salt repository environmental assessment (EA) prepared by the US Department of Energy for the Davis Canyon, Utah, site. Necessary revisions to the data and methods used to develop the EA impact assessment are described. Then, a comparative evaluation is presented in which estimated impacts based upon the revised data and methods are compared with the impacts published in the EA. The evaluation indicates that the conclusions of the EA air quality and noise impact sections would be unchanged. Consequently, the guideline findings presented in Chapter 6 of the EA are also unchanged by the revised analysis. 50 refs., 16 tabs

  14. VTAC: virtual terrain assisted impact assessment for cyber attacks

    Science.gov (United States)

    Argauer, Brian J.; Yang, Shanchieh J.

    2008-03-01

    Overwhelming intrusion alerts have made timely response to network security breaches a difficult task. Correlating alerts to produce a higher level view of intrusion state of a network, thus, becomes an essential element in network defense. This work proposes to analyze correlated or grouped alerts and determine their 'impact' to services and users of the network. A network is modeled as 'virtual terrain' where cyber attacks maneuver. Overlaying correlated attack tracks on virtual terrain exhibits the vulnerabilities exploited by each track and the relationships between them and different network entities. The proposed impact assessment algorithm utilizes the graph-based virtual terrain model and combines assessments of damages caused by the attacks. The combined impact scores allow to identify severely damaged network services and affected users. Several scenarios are examined to demonstrate the uses of the proposed Virtual Terrain Assisted Impact Assessment for Cyber Attacks (VTAC).

  15. Probabilistic assessment of NPP safety under aircraft impact

    International Nuclear Information System (INIS)

    Birbraer, A.N.; Roleder, A.J.; Arhipov, S.B.

    1999-01-01

    Methodology of probabilistic assessment of NPP safety under aircraft impact is described below. The assessment is made taking into account not only the fact of aircraft fall onto the NPP building, but another casual parameters too, namely an aircraft class, velocity and mass, as well as point and angle of its impact with the building structure. This analysis can permit to justify the decrease of the required structure strength and dynamic loads on the NPP equipment. It can also be especially useful when assessing the safety of existing NPP. (author)

  16. Social impact assessment: A review and proposed approach: Final report

    International Nuclear Information System (INIS)

    Bradbury, J.A.

    1986-12-01

    The objective of the report is to identify the essential components of a comprehensive plan to assess the potential social impacts of the proposed construction and operation of a high level radioactive waste repository by the Nevada Nuclear Waste Storage Investigations (NNWSI) Project. The tasks taken to achieve this objective are: examination of the literature on Social Impact Assessment (SIA); identification of different conceptual frameworks that have been proposed or used in SIA; examination of specific aspects of the frameworks; assessment of strengths and weaknesses of the frameworks; synthesis of common elements in these frameworks; and examination and evaluation of methods of data collection and analysis. 150 refs., 6 figs., 7 tabs

  17. Social impact assessment: A review and proposed approach: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bradbury, J A

    1986-12-01

    The objective of the report is to identify the essential components of a comprehensive plan to assess the potential social impacts of the proposed construction and operation of a high level radioactive waste repository by the Nevada Nuclear Waste Storage Investigations (NNWSI) Project. The tasks taken to achieve this objective are: examination of the literature on Social Impact Assessment (SIA); identification of different conceptual frameworks that have been proposed or used in SIA; examination of specific aspects of the frameworks; assessment of strengths and weaknesses of the frameworks; synthesis of common elements in these frameworks; and examination and evaluation of methods of data collection and analysis. 150 refs., 6 figs., 7 tabs.

  18. Biodiversity impact assessment (BIA+) - methodological framework for screening biodiversity.

    Science.gov (United States)

    Winter, Lisa; Pflugmacher, Stephan; Berger, Markus; Finkbeiner, Matthias

    2018-03-01

    For the past 20 years, the life cycle assessment (LCA) community has sought to integrate impacts on biodiversity into the LCA framework. However, existing impact assessment methods still fail to do so comprehensively because they quantify only a few impacts related to specific species and regions. This paper proposes a methodological framework that will allow LCA practitioners to assess currently missing impacts on biodiversity on a global scale. Building on existing models that seek to quantify the impacts of human activities on biodiversity, the herein proposed methodological framework consists of 2 components: a habitat factor for 14 major habitat types and the impact on the biodiversity status in those major habitat types. The habitat factor is calculated by means of indicators that characterize each habitat. The biodiversity status depends on parameters from impact categories. The impact functions, relating these different parameters to a given response in the biodiversity status, rely on expert judgments. To ensure the applicability for LCA practitioners, the components of the framework can be regionalized on a country scale for which LCA inventory data is more readily available. The weighting factors for the 14 major habitat types range from 0.63 to 1.82. By means of area weighting of the major habitat types in a country, country-specific weighting factors are calculated. In order to demonstrate the main part of the framework, examples of impact functions are given for the categories "freshwater eutrophication" and "freshwater ecotoxicity" in 1 major habitat type. The results confirm suitability of the methodological framework. The major advantages are the framework's user-friendliness, given that data can be used from LCA databases directly, and the complete inclusion of all levels of biodiversity (genetic, species, and ecosystem). It is applicable for the whole world and a wide range of impact categories. Integr Environ Assess Manag 2018;14:282-297.

  19. Environmental impact assessment around TRIGA research reactor

    International Nuclear Information System (INIS)

    Lee, Jeong Ho; Lee, Hyun Duk; Lee, Young Bok; Cheong, Kyu Hoi; Ahn, Jong Sung; Kim, Kug Chan; You, Byung Sun; Kim, Byung Woo; Kim, Sang Bok; Han Moon Hee

    1985-01-01

    Population distribution, atmospheric change, X/Q, characteristics of terrestrial ecosystem around Seoul site were surveyed. Environmental radiation and radioactivities such as grossα, grossβ, Cs-137, Sr-90 and H-3 of various environmental samples were analyzed. The values of environmental radiation dose tended to increase gradually in the light of the recent five years' results of environmental radiation monitoring around the nuclear power plants from 1980 to 1984, however, the changes were not significant. In addition, continuous assessment of environmental radiation monitoring on the roofs of main building and life science building at KAERI showed that the environmental radiation dose tended to increase a little during the night time. Judging from the above results, it is concluded that environmental contamination level by radioactive materials could be ignored in the case of radioisotope production or experiment using radioisotopes except the release of gaseous radioactive materials such as Ar-41 of short half life by the operation of nuclear reactor. (Author)

  20. Qualitative assessment of environmental impacts through fuzzy logic

    International Nuclear Information System (INIS)

    Peche G, Roberto

    2008-01-01

    The vagueness of many concepts usually utilized in environmental impact studies, along with frequent lack of quantitative information, suggests that fuzzy logic can be applied to carry out qualitative assessment of such impacts. This paper proposes a method for valuing environmental impacts caused by projects, based on fuzzy sets theory and methods of approximate reasoning. First, impacts must be described by a set of features. A linguistic variable is assigned to each feature, whose values are fuzzy sets. A fuzzy evaluation of environmental impacts is achieved using rule based fuzzy inference and the estimated fuzzy value of each feature. Generalized modus ponens has been the inference method. Finally, a crisp value of impact is attained by aggregation and defuzzification of all fuzzy results

  1. Fragility assessment method of Concrete Wall Subjected to Impact Loading

    International Nuclear Information System (INIS)

    Hahm, Daegi; Shin, Sang Shup; Choi, In-Kil

    2014-01-01

    These studies have been aimed to verify and ensure the safety of the targeted walls and structures especially in the viewpoint of the deterministic approach. However, recently, the regulation and the assessment of the safety of the nuclear power plants (NPPs) against to an aircraft impact are strongly encouraged to adopt a probabilistic approach, i.e., the probabilistic risk assessment of an aircraft impact. In Korea, research to develop aircraft impact risk quantification technology was initiated in 2012 by Korea Atomic Energy Research Institute (KAERI). In this paper, for the one example of the probabilistic safety assessment approach, a method to estimate the failure probability and fragility of concrete wall subjected to impact loading caused by missiles or engine parts of aircrafts will be introduced. This method and the corresponding results will be used for the total technical roadmap and the procedure to assess the aircraft impact risk (Fig.1). A method and corresponding results of the estimation of the failure probability and fragility for a concrete wall subjected to impact loadings caused by missiles or engine parts of aircrafts was introduced. The detailed information of the target concrete wall in NPP, and the example aircraft engine model is considered safeguard information (SGI), and is not contained in this paper

  2. Impact assessment of land use planning driving forces on environment

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Longgao, E-mail: chenlonggao@163.com [Institute of Land Resources, Jiangsu Normal University (JSNU), Xuzhou 221116 (China); Yang, Xiaoyan [Institute of Land Resources, Jiangsu Normal University (JSNU), Xuzhou 221116 (China); School of Environment and Spatial Informatics, China University of Mining and Technology, Xuzhou 221116 (China); Chen, Longqian [School of Environment and Spatial Informatics, China University of Mining and Technology, Xuzhou 221116 (China); Li, Long [Department of Geography, Vrije Universiteit Brussel, Brussels 1050 (Belgium)

    2015-11-15

    Land use change may exert a negative impact on environmental quality. A state–impact–state (SIS) model describing a state transform under certain impacts has been integrated into land use planning (LUP) environmental impact assessment (LUPEA). This logical model is intuitive and easy to understand, but the exploration of impact is essential to establish the indicator system and to identify the scope of land use environmental impact when it is applied to a specific region. In this study, we investigated environmental driving forces from land use planning (LUPF), along with the conception, components, scope, and impact of LUPF. This method was illustrated by a case study in Zoucheng, China. Through the results, we concluded that (1) the LUPF on environment are impacts originated from the implementation of LUP on a regional environment, which are characterized by four aspects: magnitude, direction, action point, and its owner; (2) various scopes of LUPF on individual environmental elements based on different standards jointly define the final scope of LUPEA; (3) our case study in Zoucheng demonstrates the practicability of this proposed approach; (4) this method can be embedded into LUPEA with direction, magnitudes, and scopes of the LUPF on individual elements obtained, and the identified indicator system can be directly employed into LUPEA and (5) the assessment helps to identify key indicators and to set up a corresponding strategy to mitigate the negative impact of LUP on the environment, which are two important objectives of strategic environmental assessment (SEA) in LUP. - Highlights: • Environmental driving forces from land use planning (LUPF) are investigated and categorized. • Our method can obtains the direction, magnitudes and scopes of environmental driving forces. • The LUPEA scope is determined by the combination of various scopes of LUPF on individual elements. • LUPF assessment can be embedded into LUPEA. • The method can help to

  3. Strategy for an assessment of cumulative ecological impacts

    International Nuclear Information System (INIS)

    Boucher, P.; Collins, J.; Nelsen, J.

    1995-01-01

    The US Department of Energy (DOE) has developed a strategy to conduct an assessment of the cumulative ecological impact of operations at the 300-square-mile Savannah River Site. This facility has over 400 identified waste units and contains several large watersheds. In addition to individual waste units, residual contamination must be evaluated in terms of its contribution to ecological risks at zonal and site-wide levels. DOE must be able to generate sufficient information to facilitate cleanup in the immediate future within the context of a site-wide ecological risk assessment that may not be completed for many years. The strategy superimposes a more global perspective on ecological assessments of individual waste units and provides strategic underpinnings for conducting individual screening-level and baseline risk assessments at the operable unit and zonal or watershed levels. It identifies ecological endpoints and risk assessment tools appropriate for each level of the risk assessment. In addition, it provides a clear mechanism for identifying clean sites through screening-level risk assessments and for elevating sites with residual contamination to the next level of assessment. Whereas screening-level and operable unit-level risk assessments relate directly to cleanup, zonal and site-wide assessments verity or confirm the overall effectiveness of remediation. The latter assessments must show, for example, whether multiple small areas with residual pesticide contamination that have minimal individual impact would pose a cumulative risk from bioaccumulation because they are within the habitat range of an ecological receptor

  4. How to assess extreme weather impacts - case European transport network

    Science.gov (United States)

    Leviäkangas, P.

    2010-09-01

    To assess the impacts of climate change and preparing for impacts is a process. This process we must understand and learn to apply. EWENT (Extreme Weather impacts on European Networks of Transport) will be a test bench for one prospective approach. It has the following main components: 1) identifying what is "extreme", 2) assessing the change in the probabilities, 3) constructing the causal impact models, 4) finding appropriate methods of pricing and costing, 5) finding alternative strategy option, 6) assessing the efficiency of strategy option. This process follows actually the steps of standardized risk management process. Each step is challenging, but if EWENT project succeeds to assess the extreme weather impacts on European transport networks, it is one possible benchmark how to carry out similar analyses in other regions and on country level. EWENT approach could particularly useful for weather and climate information service providers, offering tools for transport authorities and financiers to assess weather risks, and then rationally managing the risks. EWENT project is financed by the European Commission and participated by met-service organisations and transport research institutes from different parts of Europe. The presentation will explain EWENT approach in detail and bring forth the findings of the first work packages.

  5. A new approach for environmental justice impact assessment

    International Nuclear Information System (INIS)

    Wilkinson, C.H.; Brumburgh, G.P.; Edmunds, T.A.; Kay, D.

    1996-03-01

    President Clinton's Executive Order 12898 calls for examination of disproportionately high and adverse impacts to minority and low-income communities. In addition to demographic mapping, environmental justice analyses should also include quantitative impact assessment to show presence or absence of disproportionate impacts. This study demonstrates use of a geographic information system (GIS) and a computer model. For this demonstration, a safety analysis report and a computer code were used to develop impact assessment data from a hypothetical facility accident producing a radiological airborne plume. The computer code modeled the plume, plotted dose contours, and provided latitude and longitude coordinates for transfer to the GIS. The GIS integrated and mapped the impact and demographic data toprovide a graphical representation of the plume with respect to the population. Impacts were then analyzed. The GIS was used to estimate the total dose to the exposed population under the plume, the dose to the low-income population under the plume, and the dose to the minority population under the plume. Impacts among the population groups were compared to determine whether a dispropotionate share of the impacts were borne by minority or low-income populations

  6. Assessing women's lacrosse head impacts using finite element modelling.

    Science.gov (United States)

    Clark, J Michio; Hoshizaki, T Blaine; Gilchrist, Michael D

    2018-04-01

    Recently studies have assessed the ability of helmets to reduce peak linear and rotational acceleration for women's lacrosse head impacts. However, such measures have had low correlation with injury. Maximum principal strain interprets loading curves which provide better injury prediction than peak linear and rotational acceleration, especially in compliant situations which create low magnitude accelerations but long impact durations. The purpose of this study was to assess head and helmet impacts in women's lacrosse using finite element modelling. Linear and rotational acceleration loading curves from women's lacrosse impacts to a helmeted and an unhelmeted Hybrid III headform were input into the University College Dublin Brain Trauma Model. The finite element model was used to calculate maximum principal strain in the cerebrum. The results demonstrated for unhelmeted impacts, falls and ball impacts produce higher maximum principal strain values than stick and shoulder collisions. The strain values for falls and ball impacts were found to be within the range of concussion and traumatic brain injury. The results also showed that men's lacrosse helmets reduced maximum principal strain for follow-through slashing, falls and ball impacts. These findings are novel and demonstrate that for high risk events, maximum principal strain can be reduced by implementing the use of helmets if the rules of the sport do not effectively manage such situations. Copyright © 2018 Elsevier Ltd. All rights reserved.

  7. Environmental impact assessments and geological repositories for radioactive waste

    International Nuclear Information System (INIS)

    O'Sullivan, P.; McKirdy, B.; Askarieh, M.; Bond, A.; Russell, S.

    1999-01-01

    Since 1985 it has been obligatory that facilities in the European Union designed for the permanent storage or disposal of radioactive waste be assessed to determine their effects on the environment. This assessment must be undertaken in advance of any decision by national authorities to give consent for development work to proceed. Member States are given wide discretion on how the above requirements are implemented in practice, e.g. the relevant European Council Directives call for the results of the environmental assessment to be made available to the public before development consent is granted but the detailed arrangements for dissemination of such information and procedures for public consultation are determined by individual Member States. Although the Directives require an assessment of the direct and indirect effects of a project on human beings and on various elements of the natural environment, they are non-specific as to what particular impacts should be addressed, particularly as regards the effects of a project on human beings. Therefore, for example, each Member State may decide whether or not social, health and economic impacts should be included in the assessment. This paper discusses the above issues. It proposes a model approach to environmental impact assessment in the context of geological repositories, including the role of the assessment on the overall decision processes for repository development, the scope and content of the assessment report, and approaches to public involvement

  8. Integrated manure management to reduce environmental impact: II. Environmental impact assessment of strategies

    NARCIS (Netherlands)

    Vries, de J.W.; Groenestein, C.M.; Schroder, J.J.; Hoogmoed, W.B.; Sukkel, W.; Groot Koerkamp, P.W.G.; Boer, de I.J.M.

    2015-01-01

    Manure management contributes to adverse environmental impacts through losses of nitrogen (N), phosphorus, and carbon (C). In this study, we aimed to assess the potential of newly designed strategies for integrated manure management (IS) to reduce environmental impact. An important aspect of the

  9. Comparison of three different LCIA methods: EDIP97, CML2001 and Eco-indicator 99. Does it matter which one you choose

    DEFF Research Database (Denmark)

    Dreyer, Louise Camilla; Niemann, Anne Louise; Hauschild, Michael Zwicky

    2003-01-01

    ?’ To investigate this issue, a comparison is performed of three frequently applied life cycle impact assessment methods. Methods. The three life cycle impact assessment methods EDIP97 (1), CML2001 (2) and Eco-indicator 99 (3) are compared on their performance through application to the same life cycle inventory...... of the EDIP97 and CML2001 output, differences up to two orders of magnitude are found for some of the indicator results for the impact categories describing toxicity to humans and ecosystems, and there is little similarity in the patterns of major contributors among the two methods. For human toxicity the CML......2001 score is dominated by contribution from metals while the EDIP97 score is caused by a solvent and nitrogen oxides. For aquatic ecotoxicity, metals are the main contributors for both methods but while it is vanadium for CML2001, it is strontium for EDIP97. After normalisation, the differences...

  10. Assessing environmental impacts in a life cycle perspective

    DEFF Research Database (Denmark)

    Hauschild, Michael Zwicky

    2005-01-01

    is focused on the product system which comprises all the processes which the product and its components meet throughout their lives- from the extraction of raw materials via manufacture, use and waste management to final disposal, or in short from the cradle to the grave (see Figure 1). The focus......What are the environmental impacts from an armchairor a cellular phone or a steak, if you take into account all the activities needed to produce, maintain, use or consume and eventually dispose of it? Life cycle impact assessment is the part of life cycle assessment (LCA) where the inventory...... of material flows in the life cycle of a product are translated into environmental impacts and consumption of resources, and questions like these are given an answer. The environmental impacts may range from very local (e.g. land use) to global (like climate change). As an environmental analysis tool, LCA...

  11. Environmental impact assessment for energy pathways: an integrated methodology

    International Nuclear Information System (INIS)

    Sommereux-Blanc, Isabelle

    2010-01-01

    This document presents the synthesis of my research work contributing to the development of an integrated methodology of environmental impact assessment for energy pathways. In the context of world globalization, environmental impact assessments issues are highly linked with the following questioning: Which environmental impacts? for which demand? at which location? at which temporal scale? My work is built upon the definition of a conceptual framework able to handle these issues and upon its progressive implementation. The integration of the spatial and temporal issues within the methodology are key elements. Fundamental cornerstones of this framework are presented along the DPSIR concept (Driving forces, Pressures, State, Impacts, Responses). They cover a comprehensive analysis of the limits and the relevance of life cycle analysis and the development of a geo-spatialized environmental performance approach for an electrical production pathway. Perspectives linked with the development of this integrated methodology are detailed for energy pathways. (author)

  12. Impact assessment procedures for sustainable development: A complexity theory perspective

    International Nuclear Information System (INIS)

    Nooteboom, Sibout

    2007-01-01

    The author assumes that effective Impact Assessment procedures should somehow contribute to sustainable development. There is no widely agreed framework for evaluating such effectiveness. The author suggests that complexity theories may offer criteria. The relevant question is 'do Impact Assessment Procedures contribute to the 'requisite variety' of a social system for it to deal with changing circumstances?' Requisite variety theoretically relates to the capability of a system to deal with changes in its environment. The author reconstructs how thinking about achieving sustainable development has developed in a sequence of discourses in The Netherlands since the 1970s. Each new discourse built on the previous ones, and is supposed to have added to 'requisite variety'. The author asserts that Impact Assessment procedures may be a necessary component in such sequences and derives possible criteria for effectiveness

  13. Groundwater impact assessment report for the 216-U-14 Ditch

    Energy Technology Data Exchange (ETDEWEB)

    Singleton, K.M.; Lindsey, K.A.

    1994-01-01

    Groundwater impact assessments are conducted at liquid effluent receiving sites on the Hanford Site to determine hydrologic and contaminant impacts caused by discharging wastewater to the soil column. The assessments conducted are pursuant to the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement) Milestone M-17-00A and M-17-00B, as agreed by the US Department of Energy (DOE), Washington State Department of Ecology (Ecology), and the US Environmental Protection Agency (EPA) (Ecology et al. 1992). This report assesses impacts on the groundwater and vadose zone from wastewater discharged to the 216-U-14 Ditch. Contemporary effluent waste streams of interest are 242-S Evaporator Steam Condensate and UO{sub 3}/U Plant wastewater.

  14. Assessing the impact of blended learning on student performance

    OpenAIRE

    Do Won Kwak; Flavio Menezes; Carl Sherwood

    2013-01-01

    This paper assesses quantitatively the impact on student performance of a blended learning experiment within a large undergraduate first year course in statistics for business and economics students. We employ a differences- in-difference econometric approach, which controls for differences in student characteristics and course delivery method, to evaluate the impact of blended learning on student performance. Although students in the course manifest a preference for live lectures over online...

  15. Assessing human rights impacts in corporate development projects

    International Nuclear Information System (INIS)

    Salcito, Kendyl; Utzinger, Jürg; Weiss, Mitchell G.; Münch, Anna K.; Singer, Burton H.; Krieger, Gary R.; Wielga, Mark

    2013-01-01

    Human rights impact assessment (HRIA) is a process for systematically identifying, predicting and responding to the potential impact on human rights of a business operation, capital project, government policy or trade agreement. Traditionally, it has been conducted as a desktop exercise to predict the effects of trade agreements and government policies on individuals and communities. In line with a growing call for multinational corporations to ensure they do not violate human rights in their activities, HRIA is increasingly incorporated into the standard suite of corporate development project impact assessments. In this context, the policy world's non-structured, desk-based approaches to HRIA are insufficient. Although a number of corporations have commissioned and conducted HRIA, no broadly accepted and validated assessment tool is currently available. The lack of standardisation has complicated efforts to evaluate the effectiveness of HRIA as a risk mitigation tool, and has caused confusion in the corporate world regarding company duties. Hence, clarification is needed. The objectives of this paper are (i) to describe an HRIA methodology, (ii) to provide a rationale for its components and design, and (iii) to illustrate implementation of HRIA using the methodology in two selected corporate development projects—a uranium mine in Malawi and a tree farm in Tanzania. We found that as a prognostic tool, HRIA could examine potential positive and negative human rights impacts and provide effective recommendations for mitigation. However, longer-term monitoring revealed that recommendations were unevenly implemented, dependent on market conditions and personnel movements. This instability in the approach to human rights suggests a need for on-going monitoring and surveillance. -- Highlights: • We developed a novel methodology for corporate human rights impact assessment. • We piloted the methodology on two corporate projects—a mine and a plantation. • Human

  16. Assessing human rights impacts in corporate development projects

    Energy Technology Data Exchange (ETDEWEB)

    Salcito, Kendyl, E-mail: kendyl.salcito@unibas.ch [Department of Epidemiology and Public Health, Swiss Tropical and Public Health Institute, P.O. Box, CH-4002 Basel (Switzerland); University of Basel, P.O. Box, CH-4003 Basel (Switzerland); NomoGaia, 1900 Wazee Street, Suite 303, Denver, CO 80202 (United States); NewFields, LLC, Denver, CO 80202 (United States); Utzinger, Jürg, E-mail: juerg.utzinger@unibas.ch [Department of Epidemiology and Public Health, Swiss Tropical and Public Health Institute, P.O. Box, CH-4002 Basel (Switzerland); University of Basel, P.O. Box, CH-4003 Basel (Switzerland); Weiss, Mitchell G., E-mail: Mitchell-g.Weiss@unibas.ch [Department of Epidemiology and Public Health, Swiss Tropical and Public Health Institute, P.O. Box, CH-4002 Basel (Switzerland); University of Basel, P.O. Box, CH-4003 Basel (Switzerland); Münch, Anna K., E-mail: annak.muench@gmail.com [Emerging Pathogens Institute, University of Florida, Gainesville, FL 32610 (United States); Singer, Burton H., E-mail: bhsinger@epi.ufl.edu [Emerging Pathogens Institute, University of Florida, Gainesville, FL 32610 (United States); Krieger, Gary R., E-mail: gkrieger@newfields.com [NewFields, LLC, Denver, CO 80202 (United States); Wielga, Mark, E-mail: wielga@nomogaia.org [NomoGaia, 1900 Wazee Street, Suite 303, Denver, CO 80202 (United States); NewFields, LLC, Denver, CO 80202 (United States)

    2013-09-15

    Human rights impact assessment (HRIA) is a process for systematically identifying, predicting and responding to the potential impact on human rights of a business operation, capital project, government policy or trade agreement. Traditionally, it has been conducted as a desktop exercise to predict the effects of trade agreements and government policies on individuals and communities. In line with a growing call for multinational corporations to ensure they do not violate human rights in their activities, HRIA is increasingly incorporated into the standard suite of corporate development project impact assessments. In this context, the policy world's non-structured, desk-based approaches to HRIA are insufficient. Although a number of corporations have commissioned and conducted HRIA, no broadly accepted and validated assessment tool is currently available. The lack of standardisation has complicated efforts to evaluate the effectiveness of HRIA as a risk mitigation tool, and has caused confusion in the corporate world regarding company duties. Hence, clarification is needed. The objectives of this paper are (i) to describe an HRIA methodology, (ii) to provide a rationale for its components and design, and (iii) to illustrate implementation of HRIA using the methodology in two selected corporate development projects—a uranium mine in Malawi and a tree farm in Tanzania. We found that as a prognostic tool, HRIA could examine potential positive and negative human rights impacts and provide effective recommendations for mitigation. However, longer-term monitoring revealed that recommendations were unevenly implemented, dependent on market conditions and personnel movements. This instability in the approach to human rights suggests a need for on-going monitoring and surveillance. -- Highlights: • We developed a novel methodology for corporate human rights impact assessment. • We piloted the methodology on two corporate projects—a mine and a plantation.

  17. Life cycle water use of energy production and its environmental impacts in China.

    Science.gov (United States)

    Zhang, Chao; Anadon, Laura Diaz

    2013-12-17

    The energy sector is a major user of fresh water resources in China. We investigate the life cycle water withdrawals, consumptive water use, and wastewater discharge of China's energy sectors and their water-consumption-related environmental impacts, using a mixed-unit multiregional input-output (MRIO) model and life cycle impact assessment method (LCIA) based on the Eco-indicator 99 framework. Energy production is responsible for 61.4 billion m(3) water withdrawals, 10.8 billion m(3) water consumption, and 5.0 billion m(3) wastewater discharges in China, which are equivalent to 12.3%, 4.1% and 8.3% of the national totals, respectively. The most important feature of the energy-water nexus in China is the significantly uneven spatial distribution of consumptive water use and its corresponding environmental impacts caused by the geological discrepancy among fossil fuel resources, fresh water resources, and energy demand. More than half of energy-related water withdrawals occur in the east and south coastal regions. However, the arid north and northwest regions have much larger water consumption than the water abundant south region, and bear almost all environmental damages caused by consumptive water use.

  18. Focus: Assessing the regional impacts of global warming

    International Nuclear Information System (INIS)

    Woo, Mingko

    1992-01-01

    Five studies are presented which assess the impacts of global warming on physical, economic, and social systems in Canada. A study on the use of climatic change scenarios to estimate ecoclimatic impacts was carried out. These scenarios may include synthetic scenarios produced from historical data, global climate model (GCM) simulations, and hybrid scenarios. The advantages and drawbacks of various scenarios are discussed along with the criteria for selecting impact assessment models. An examination of water resources in the Great Lakes and the Saskatchewan River subbasin uses case studies of two areas that have experienced wide hydrological variations due to climatic variability in order to determine the impacts of global warming scenarios on net basin supply. Problems of developing regional models are discussed and results of projected changes in net basin supply are presented for GCM-based simulations and hypothetical warming scenarios. A study of the impacts of climate warming on transportation and the regional economy in northern Canada uses stochastic models to provide examples of how Mackenzie River barge traffic will be affected. The economic impacts of the resultant lengthened shipping season are outlined under three scenarios. The implications of climatic change on Ontario agriculture are assessed according to GCM scenarios. Results are presented for crop yields and production as well as land resource suitability. Finally, sociocultural implications of global warming on the Arctic and the Inuit are summarized, with reference to a past warming episode occurring around the year 1000. 45 refs., 4 figs., 3 tabs

  19. Scaling up: Assessing social impacts at the macro-scale

    International Nuclear Information System (INIS)

    Schirmer, Jacki

    2011-01-01

    Social impacts occur at various scales, from the micro-scale of the individual to the macro-scale of the community. Identifying the macro-scale social changes that results from an impacting event is a common goal of social impact assessment (SIA), but is challenging as multiple factors simultaneously influence social trends at any given time, and there are usually only a small number of cases available for examination. While some methods have been proposed for establishing the contribution of an impacting event to macro-scale social change, they remain relatively untested. This paper critically reviews methods recommended to assess macro-scale social impacts, and proposes and demonstrates a new approach. The 'scaling up' method involves developing a chain of logic linking change at the individual/site scale to the community scale. It enables a more problematised assessment of the likely contribution of an impacting event to macro-scale social change than previous approaches. The use of this approach in a recent study of change in dairy farming in south east Australia is described.

  20. Environmental economic impact assessment in China: Problems and prospects

    International Nuclear Information System (INIS)

    Lindhjem, Henrik; Hu Tao; Ma Zhong; Skjelvik, John Magne; Song Guojun; Vennemo, Haakon; Wu Jian; Zhang Shiqiu

    2007-01-01

    The use of economic valuation methods to assess environmental impacts of projects and policies has grown considerably in recent years. However, environmental valuation appears to have developed independently of regulations and practice of environmental impact assessment (EIA), despite its potential benefits to the EIA process. Environmental valuation may be useful in judging significance of impacts, determining mitigation level, comparing alternatives and generally enabling a more objective analysis of tradeoffs. In China, laws and regulations require the use of environmental valuation in EIA, but current practice lags far behind. This paper assesses the problems and prospects of introducing environmental valuation into the EIA process in China. We conduct four case studies of environmental economic impact assessment (EEIA), three of which are based on environmental impact statements of construction projects (a power plant, a wastewater treatment plant and a road construction project) and one for a regional pollution problem (wastewater irrigation). The paper demonstrates the potential usefulness of environmental valuation but also discusses several challenges to the introduction and wider use of EEIA, many of which are likely to be of relevance far beyond the Chinese context. The paper closes with suggesting some initial core elements of an EEIA guideline

  1. Gross national happiness as a framework for health impact assessment

    International Nuclear Information System (INIS)

    Pennock, Michael; Ura, Karma

    2011-01-01

    The incorporation of population health concepts and health determinants into Health Impact Assessments has created a number of challenges. The need for intersectoral collaboration has increased; the meaning of 'health' has become less clear; and the distinctions between health impacts, environmental impacts, social impacts and economic impacts have become increasingly blurred. The Bhutanese concept of Gross National Happiness may address these issues by providing an over-arching evidence-based framework which incorporates health, social, environmental and economic contributors as well as a number of other key contributors to wellbeing such as culture and governance. It has the potential to foster intersectoral collaboration by incorporating a more limited definition of health which places the health sector as one of a number of contributors to wellbeing. It also allows for the examination of the opportunity costs of health investments on wellbeing, is consistent with whole-of-government approaches to public policy and emerging models of social progress.

  2. Environmental impact assessment in the Fijian state sector

    International Nuclear Information System (INIS)

    Turnbull, Jane

    2003-01-01

    For over 20 years, the South Pacific state of Fiji has required developers to conduct more than 70 environmental impact assessments (EIA), without specifying the environmental quality or impacts it considers (in)appropriate. It has ignored aspects of EIA to which agencies funding development have paid little attention--assessing alternatives, monitoring outcomes and enforcing consent conditions. This infers the Fijian state is not serious about using EIA to control environmental quality. Factors other than technical shortcomings are shaping the way the state constrains EIA practice. Unless these factors change, the comprehensive EIA system proposed in Sustainable Development legislation will not prevent environmental degradation

  3. Environmental impact assessment for the Nova projects (Building 391 complex)

    International Nuclear Information System (INIS)

    Odell, B.N.

    1979-01-01

    The environmental impact assessment of the Nova projects (Building 391 Complex) describes (1) the proposed actions, (2) the existing environment in and around the Livermore Valley, and (3) the potential environmental impacts from the construction and operation of these facilities. It shows that the proposed action does not conflict with any Federal, State, Regional, or Local Plans and Programs. Possible alternatives to the proposed action are discussed. However, it is concluded that the proposed actions were the most reasonable of the alternatives and would involve relatively minor adverse environmental impacts

  4. Assessment of impact on seafloor features in INDEX area

    Digital Repository Service at National Institute of Oceanography (India)

    Sharma, R.

    Marine Georesources and Geotechnology,18:237–250,2000Copyright ©2000 Taylor & Francis1064-119X / 00 $12.00 1 .00 Assessment of Impact on Seafloor Features in INDEX Area RAHUL SHARMANational Institute of Oceanography,Dona Paula,Goa 403004,India...Benthic disturbance,environmental impact,photographic and subbottomdata,seafloor features. Imaging and sounding techniques are effective tools for obtaining first-hand information forassessing the baseline (undisturbed) conditions as well as the impact (disturbed...

  5. The convention on environmental impact assessment in a transboundary context

    International Nuclear Information System (INIS)

    Schrage, W.

    2000-01-01

    The ECE Convention on Environmental Impact Assessment in a Transboundary Context (EIA Convention) is the first multilateral treaty to specify the procedural rights and duties of Parties with regard to transboundary impacts of proposed activities and to provide procedures, in a transboundary context, for the consideration of environmental impacts in decision-making. The EIA Convention, elaborated under the auspices of the United Nations Economic Commission for Europe (ECE), was adopted at Espoo, Finland, in February 1991. Obligations stipulated, and measures and procedures provided for in this Convention are described. (author)

  6. Using Support Vector Machine on EEG for Advertisement Impact Assessment

    Directory of Open Access Journals (Sweden)

    Zhen Wei

    2018-03-01

    Full Text Available The advertising industry depends on an effective assessment of the impact of advertising as a key performance metric for their products. However, current assessment methods have relied on either indirect inference from observing changes in consumer behavior after the launch of an advertising campaign, which has long cycle times and requires an ad campaign to have already have been launched (often meaning costs having been sunk. Or through surveys or focus groups, which have a potential for experimental biases, peer pressure, and other psychological and sociological phenomena that can reduce the effectiveness of the study. In this paper, we investigate a new approach to assess the impact of advertisement by utilizing low-cost EEG headbands to record and assess the measurable impact of advertising on the brain. Our evaluation shows the desired performance of our method based on user experiment with 30 recruited subjects after watching 220 different advertisements. We believe the proposed SVM method can be further developed to a general and scalable methodology that can enable advertising agencies to assess impact rapidly, quantitatively, and without bias.

  7. Using Support Vector Machine on EEG for Advertisement Impact Assessment.

    Science.gov (United States)

    Wei, Zhen; Wu, Chao; Wang, Xiaoyi; Supratak, Akara; Wang, Pan; Guo, Yike

    2018-01-01

    The advertising industry depends on an effective assessment of the impact of advertising as a key performance metric for their products. However, current assessment methods have relied on either indirect inference from observing changes in consumer behavior after the launch of an advertising campaign, which has long cycle times and requires an ad campaign to have already have been launched (often meaning costs having been sunk). Or through surveys or focus groups, which have a potential for experimental biases, peer pressure, and other psychological and sociological phenomena that can reduce the effectiveness of the study. In this paper, we investigate a new approach to assess the impact of advertisement by utilizing low-cost EEG headbands to record and assess the measurable impact of advertising on the brain. Our evaluation shows the desired performance of our method based on user experiment with 30 recruited subjects after watching 220 different advertisements. We believe the proposed SVM method can be further developed to a general and scalable methodology that can enable advertising agencies to assess impact rapidly, quantitatively, and without bias.

  8. A state-impact-state methodology for assessing environmental impact in land use planning

    International Nuclear Information System (INIS)

    Chen, Longgao; Yang, Xiaoyan; Chen, Longqian; Potter, Rebecca; Li, Yingkui

    2014-01-01

    The implementation of land use planning (LUP) has a large impact on environmental quality. There lacks a widely accepted and consolidated approach to assess the LUP environmental impact using Strategic Environmental Assessment (SEA). In this paper, we developed a state-impact-state (SIS) model employed in the LUP environmental impact assessment (LUPEA). With the usage of Matter-element (ME) and Extenics method, the methodology based on the SIS model was established and applied in the LUPEA of Zoucheng County, China. The results show that: (1) this methodology provides an intuitive and easy understanding logical model for both the theoretical analysis and application of LUPEA; (2) the spatial multi-temporal assessment from base year, near-future year to planning target year suggests the positive impact on the environmental quality in the whole County despite certain environmental degradation in some towns; (3) besides the spatial assessment, other achievements including the environmental elements influenced by land use and their weights, the identification of key indicators in LUPEA, and the appropriate environmental mitigation measures were obtained; and (4) this methodology can be used to achieve multi-temporal assessment of LUP environmental impact of County or Town level in other areas. - Highlights: • A State-Impact-State model for Land Use Planning Environmental Assessment (LUPEA). • Matter-element (ME) and Extenics methods were embedded in the LUPEA. • The model was applied to the LUPEA of Zoucheng County. • The assessment shows improving environment quality since 2000 in Zoucheng County. • The method provides a useful tool for the LUPEA in the county level

  9. A state-impact-state methodology for assessing environmental impact in land use planning

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Longgao [Institute of land resources, Jiangsu Normal University, Xuzhou 221116 (China); Yang, Xiaoyan [Institute of land resources, Jiangsu Normal University, Xuzhou 221116 (China); School of Environmental Science and Spatial Informatics, China University of Mining and Technology, Xuzhou 221116 (China); Chen, Longqian, E-mail: cumt_chenlongqian@163.com [School of Environmental Science and Spatial Informatics, China University of Mining and Technology, Xuzhou 221116 (China); Potter, Rebecca; Li, Yingkui [Department of Geography, University of Tennessee, Knoxville, TN 37996 (United States)

    2014-04-01

    The implementation of land use planning (LUP) has a large impact on environmental quality. There lacks a widely accepted and consolidated approach to assess the LUP environmental impact using Strategic Environmental Assessment (SEA). In this paper, we developed a state-impact-state (SIS) model employed in the LUP environmental impact assessment (LUPEA). With the usage of Matter-element (ME) and Extenics method, the methodology based on the SIS model was established and applied in the LUPEA of Zoucheng County, China. The results show that: (1) this methodology provides an intuitive and easy understanding logical model for both the theoretical analysis and application of LUPEA; (2) the spatial multi-temporal assessment from base year, near-future year to planning target year suggests the positive impact on the environmental quality in the whole County despite certain environmental degradation in some towns; (3) besides the spatial assessment, other achievements including the environmental elements influenced by land use and their weights, the identification of key indicators in LUPEA, and the appropriate environmental mitigation measures were obtained; and (4) this methodology can be used to achieve multi-temporal assessment of LUP environmental impact of County or Town level in other areas. - Highlights: • A State-Impact-State model for Land Use Planning Environmental Assessment (LUPEA). • Matter-element (ME) and Extenics methods were embedded in the LUPEA. • The model was applied to the LUPEA of Zoucheng County. • The assessment shows improving environment quality since 2000 in Zoucheng County. • The method provides a useful tool for the LUPEA in the county level.

  10. Value-impact assessment of safety-related modifications

    International Nuclear Information System (INIS)

    Knowles, W.M.C.; Dinnie, K.S.; Gordon, C.W.

    1992-01-01

    Like other nuclear utilities, Ontario Hydro, as part of its risk management activities, continually assesses the safety of its nuclear operations. In addition, new regulatory requirements are being applied to the older nuclear power plants. Both of these result in proposed plant modifications designed to reduce the risk to the public. However, modifications to an operating plant can have serious economic effects, and the resources, both financial and personnel, required for the implementation of these modifications are limited. Thus, all potential benefits and effects of a proposed modification must be thoroughly investigated to judge whether the modification is beneficial. Ontario Hydro has begun to use comprehensive value-impact assessments, utilizing plant-specific probabilistic risk assessments (PRAs), as tools to provide an informed basis for judgments on the benefit of safety-related modifications. The results from value-impact assessments can also be used to prioritize the implementation of these modifications

  11. Assessing the impact of windfarms - the learning curve in Cornwall

    International Nuclear Information System (INIS)

    Hull, A.

    1998-01-01

    This paper uses windfarm application decisions in Cornwall between 1989 and 1995 to illustrate the learning curve of planners in assessing appropriate windfarm locations, and in particular how the process of knowledge construction is constantly reviewed and modified in the light of experience and circumstance. One of the accepted purposes of Environmental Impact Assessment is to predict the possible effects, both beneficial and adverse, of the development on the environment. In practice what is beneficial and what is adverse can be a matter of dispute. The paper draws out the role of the planning system in assessing what is problematic or benign, and the practical strategies and procedures used to assess and control the environmental impacts of wind energy schemes. (Author)

  12. Radiation environmental impact assessment of the radioisotope's application on nuclear medical science

    International Nuclear Information System (INIS)

    Liu Hongshi

    2004-01-01

    The radiation environmental impact assessment of the radioisotope's application on nuclear medical science is introduced, including the assessment criteria, the assessment methods and the environmental impact assessment of three wastes emission. (authors)

  13. Environmental impact assessment for an OTEC plant in Martinique Island

    International Nuclear Information System (INIS)

    Auvray, Cedric; Ledoux, Sebastien; Diaz, Berenice; Yvon, Christophe; Pouget-Cuvelier, Adeline

    2015-01-01

    The Ocean Thermal Energy Conversion (OTEC) is a marine renewable energy system that uses the temperature difference between the cold deep waters and warm surface waters to produce electricity. DCNS, a world-expert in naval defence and an innovator in energy has conducted technical, juridical and environmental feasibility studies of a plant offshore Martinique under an agreement with the Regional Council. In this context, DCNS realised a preliminary Environmental Impact Assessment in order to prepare public debate to be done further. Due to innovation of such a project, a specific methodology has been done for that. First step was to study bibliography in details, for site assessment of course, but also for impacts of other projects in the world that should present relevant similarities with OTEC (coastal thermal power plants for example). This bibliographic study dealt with thematic synthesis for each topic of physical, biological and human field that could be impacted by the project (total of 28 topics). The aim was to define priorities for specific assessments that have been done further: acoustic impacts, biogeochemical impacts of artificial upwelling, biofouling impacts, etc. Some of these topics are now on course with specific scientific research programs that have been launched at the end of this study. For each new topic, a specific methodology has been used or adapted for OTEC. These methods are made step by step, with a preliminary approach followed by a specific research program when it is necessary. Noise prediction has been done with a specific tool used for ship construction industry and a 3D propagation modelling. Biofouling has been assessed by a bibliographic approach and will be precised further with experimental moorings. Biogeochemical and biological impacts due to artificial and localised upwelling are now being studied in details with a double skill approach (physical modelling and plankton analysis), after preliminary water chemicals

  14. Development of a life-cycle impact assessment methodology linked to the Planetary Boundaries framework

    DEFF Research Database (Denmark)

    Ryberg, Morten W.; Owsianiak, Mikolaj; Richardson, Katherine

    2018-01-01

    to quantify the share of the “safe operating space� that human activities occupy, as was illustrated by calculating indicator scores for about 10,600 products, technologies and services exemplifying several sectors, including materials, energy, transport, and processing. The PB-LCIA can be used...... by companies interested in gauging their activities against the Planetary Boundaries to support decisions that help to reduce the risk of human activities moving the Earth System out of the Holocene state....

  15. Assessment of the visual impact of SRC plantations

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    This report summarises the findings of a study examining the visual impact of short rotation cultivation (SCR) plantations and the assessing the use and effectiveness of the Good Practice Guidelines: Short Rotation Coppice for Energy Production. SCR in the landscape, policy context and landscape assessment, the effect of SCR on the landscape, and the Good Practice Guidelines are discussed. Details of 13 case study sites are given in appendices. (UK)

  16. Environmental impact assessment of genetically modified biocontrol agents

    International Nuclear Information System (INIS)

    Migheli, Q.

    2001-01-01

    This review summarises the theoretical basis of risk analysis, and the political and social implications of introducing new biotechnology products in agricultural environments. The main factors to be considered under the present European regulation in the environmental impact assessment of genetically modified biocontrol agents are briefly discussed. Finally, an alternative risk assessment paradigm is proposed for genetically modified microorganisms, which shall consider the intrinsic properties of each antagonist, rather than the method used for generating it [it

  17. Assessment of lightning impact frequency for process equipment

    International Nuclear Information System (INIS)

    Necci, Amos; Antonioni, Giacomo; Cozzani, Valerio; Krausmann, Elisabeth; Borghetti, Alberto; Nucci, Carlo Alberto

    2014-01-01

    Fires and explosions triggered by lightning strikes are among the most frequent Natech scenarios affecting the chemical and process industry. Although lightning hazard is well known, well accepted quantitative procedures to assess the contribution of accidents caused by lightning to industrial risk are still lacking. In the present study, a quantitative methodology for the assessment of the expected frequency of lightning capture by process equipment is presented. A specific model, based on Monte Carlo simulations, was developed to assess the capture frequency of lightning for equipment with a given geometry. The model allows the assessment of lay-out effects and the reduction of the capture probability due to the presence of other structures or equipment items. The results of the Monte Carlo simulations were also used to develop a simplified cell method allowing a straightforward assessment of the lightning impact probability in a quantitative risk assessment framework. The developed approach allows an in-depth analysis of the hazard due to lightning impact by identifying equipment items with the highest expected frequency of lightning impacts in a given lay-out. The model thus supplies useful data to approach the assessment of the quantitative contribution of lightning-triggered accidents to industrial risk. - Highlights: • A specific approach to storage tank lightning impact frequency calculation was developed. • The approach is suitable for the quantitative assessment of industrial risk due to lightning. • The models developed provide lightning capture frequency based on tank geometry. • Lay-out effects due to nearby structures are also accounted. • Capture frequencies may be as high as 10 −1 events/year for standalone unprotected tanks

  18. Life cycle assessment. Specific indicators for Italy in impact evaluation

    International Nuclear Information System (INIS)

    Masoni, P.

    1999-01-01

    After a brief recall and a short description of the LCA (life cycle assessment) methodology, the work is focused on the impact assessment step, discussing the state of the art and a critical identification of environmental indicators, of normalization and weighting principles for the different environmental categories specific for Italy. The application methodology to a case study concerning the production of butter by the Consorzio Granterre of Modena (Italy) is also described [it

  19. Environmental impact assessments and geological repositories: A model process

    International Nuclear Information System (INIS)

    Webster, S.

    2000-01-01

    In a recent study carried out for the European Commission, the scope and application of environmental impact assessment (EIA) legislation and current EIA practice in European Union Member States and applicant countries of Central and Eastern Europe was investigated, specifically in relation to the geological disposal of radioactive waste. This paper reports the study's investigations into a model approach to EIA in the context of geological repositories, including the role of the assessment in the overall decision processes and public involvement. (author)

  20. ENVIRONMENTAL IMPACT ASSESSMENT OF A HEALTH TECHNOLOGY: A SCOPING REVIEW.

    Science.gov (United States)

    Polisena, Julie; De Angelis, Gino; Kaunelis, David; Gutierrez-Ibarluzea, Iñaki

    2018-06-13

    The Health Technology Expert Review Panel is an advisory body to Canadian Agency for Drugs and Technologies in Health (CADTH) that develops recommendations on health technology assessments (HTAs) for nondrug health technologies using a deliberative framework. The framework spans several domains, including the environmental impact of the health technology(ies). Our research objective was to identify articles on frameworks, methods or case studies on the environmental impact assessment of health technologies. A literature search in major databases and a focused gray literature search were conducted. The main search concepts were HTA and environmental impact/sustainability. Eligible articles were those that described a conceptual framework or methods used to conduct an environmental assessment of health technologies, and case studies on the application of an environmental assessment. From the 1,710 citations identified, thirteen publications were included. Two articles presented a framework to incorporate environmental assessment in HTAs. Other approaches described weight of evidence practices and comprehensive and integrated environmental impact assessments. Central themes derived include transparency and repeatability, integration of components in a framework or of evidence into a single outcome, data availability to ensure the accuracy of findings, and familiarity with the approach used. Each framework and methods presented have different foci related to the ecosystem, health economics, or engineering practices. Their descriptions suggested transparency, repeatability, and the integration of components or of evidence into a single outcome as their main strengths. Our review is an initial step of a larger initiative by CADTH to develop the methods and processes to address the environmental impact question in an HTA.

  1. Towards a comprehensive climate impacts assessment of solar geoengineering

    Science.gov (United States)

    Irvine, Peter J.; Kravitz, Ben; Lawrence, Mark G.; Gerten, Dieter; Caminade, Cyril; Gosling, Simon N.; Hendy, Erica J.; Kassie, Belay T.; Kissling, W. Daniel; Muri, Helene; Oschlies, Andreas; Smith, Steven J.

    2017-01-01

    Despite a growing literature on the climate response to solar geoengineering—proposals to cool the planet by increasing the planetary albedo—there has been little published on the impacts of solar geoengineering on natural and human systems such as agriculture, health, water resources, and ecosystems. An understanding of the impacts of different scenarios of solar geoengineering deployment will be crucial for informing decisions on whether and how to deploy it. Here we review the current state of knowledge about impacts of a solar-geoengineered climate and identify the major research gaps. We suggest that a thorough assessment of the climate impacts of a range of scenarios of solar geoengineering deployment is needed and can be built upon existing frameworks. However, solar geoengineering poses a novel challenge for climate impacts research as the manner of deployment could be tailored to pursue different objectives making possible a wide range of climate outcomes. We present a number of ideas for approaches to extend the survey of climate impacts beyond standard scenarios of solar geoengineering deployment to address this challenge. Reducing the impacts of climate change is the fundamental motivator for emissions reductions and for considering whether and how to deploy solar geoengineering. This means that the active engagement of the climate impacts research community will be important for improving the overall understanding of the opportunities, challenges, and risks presented by solar geoengineering.

  2. Agricultural climate impacts assessment for economic modeling and decision support

    Science.gov (United States)

    Thomson, A. M.; Izaurralde, R. C.; Beach, R.; Zhang, X.; Zhao, K.; Monier, E.

    2013-12-01

    A range of approaches can be used in the application of climate change projections to agricultural impacts assessment. Climate projections can be used directly to drive crop models, which in turn can be used to provide inputs for agricultural economic or integrated assessment models. These model applications, and the transfer of information between models, must be guided by the state of the science. But the methodology must also account for the specific needs of stakeholders and the intended use of model results beyond pure scientific inquiry, including meeting the requirements of agencies responsible for designing and assessing policies, programs, and regulations. Here we present methodology and results of two climate impacts studies that applied climate model projections from CMIP3 and from the EPA Climate Impacts and Risk Analysis (CIRA) project in a crop model (EPIC - Environmental Policy Indicator Climate) in order to generate estimates of changes in crop productivity for use in an agricultural economic model for the United States (FASOM - Forest and Agricultural Sector Optimization Model). The FASOM model is a forward-looking dynamic model of the US forest and agricultural sector used to assess market responses to changing productivity of alternative land uses. The first study, focused on climate change impacts on the UDSA crop insurance program, was designed to use available daily climate projections from the CMIP3 archive. The decision to focus on daily data for this application limited the climate model and time period selection significantly; however for the intended purpose of assessing impacts on crop insurance payments, consideration of extreme event frequency was critical for assessing periodic crop failures. In a second, coordinated impacts study designed to assess the relative difference in climate impacts under a no-mitigation policy and different future climate mitigation scenarios, the stakeholder specifically requested an assessment of a

  3. The role of geomorphology in environmental impact assessment

    Science.gov (United States)

    Cavallin, A.; Marchetti, M.; Panizza, M.; Soldati, M.

    1994-04-01

    This paper aims to define the role of Geomorphology in the assessment of the impact of human activities on the environment. Environmental impact assessment (EIA) should be carried out for specific projects, in order to evaluate their suitability for the quality of the environment. In fact, each planned activity may have an impact on various environmental components. Among these, the natural component must be examined in terms of geomorphological hazards, which may endanger a project, and of geomorphological assets (elements forming the educational and cultural heritage of the landscape), which may be damaged to various extents by human activities. The relationships between humans and environment are taken into account, with particular attention to the effects of a project on the geomorphological environment. From a geomorphological point of view, after having assessed the suitability of a certain location, mainly with respect to its morphography and morphometry, the geomorphological hazards of the area which may threaten the project (risk) must be considered; then the geomorphological assets, which may be damaged by the same project (direct impact) have to be individuated. Human activities may produce two other kinds of effect: the first refers to the consequences of the geomorphological hazards induced by a project on the project itself (direct risk) and on the surronding areas (indirect risk); the second takes into account the potential deterioration of a geomorphological asset due to hazards induced by the project (indirect impact). Examples of these different cases are presented.

  4. Assessing the impact of student counselling service centres at ...

    African Journals Online (AJOL)

    strategic purpose and in satisfying key strategic stakeholders. What is needed is a forward-looking role definition linked to a set of strategic impact and performance indicators as a basis for assessment. Such an approach opens up a way to view benefits not only in traditional accounting terms such as cost savings, but also ...

  5. Impact assessment of offshore oil activities in the Arctic

    DEFF Research Database (Denmark)

    Larsen, Sanne Vammen; Hansen, Anne Merrild

    2016-01-01

    The global demand for oil and gas has lead to a notable increase in interest for oil and gas exploration in the Arctic. This paper presents the results of a comparative study of the legislation for impact assessment in Greenland, Denmark, Norway, Alaska (USA) and Canada. The point of departure...

  6. Strategic Choice Analysis by Expert Panels for Migration Impact Assessment

    NARCIS (Netherlands)

    Kourtit, K.; Nijkamp, P.

    2011-01-01

    International migration is a source of policy and research interest in many countries. This paper provides a review of experiences and findings from migration impact assessment worldwide. Various findings are briefly summarised in the context of a systematic migration SWOT analysis for five distinct

  7. Assessing climate change impacts and adaptation strategies for ...

    African Journals Online (AJOL)

    Assessing climate change impacts and adaptation strategies for smallholder agricultural systems in Uganda. ... from encroaching on swamps, which is one of the reported adaptation strategies to climate related stresses. Improving productivity of important crops (bananas for southwest, and sweet potatoes and bananas

  8. Health impact assessment – A survey on quantifying tools

    Energy Technology Data Exchange (ETDEWEB)

    Fehr, Rainer, E-mail: rainer.fehr@uni-bielefeld.de [Fakultaet fuer Gesundheitswissenschaften, Universitaet Bielefeld, Universitaetsstr. 25, 33615 Bielefeld (Germany); Mekel, Odile C.L., E-mail: odile.mekel@lzg.nrw.de [Gesundheitsdaten und analysen, Versorgungsstrukturen, Landeszentrum Gesundheit Nordrhein-Westfalen (LZG.NRW), Westerfeldstr. 35-37, 33611 Bielefeld (Germany); Fintan Hurley, J., E-mail: fintan.hurley@iom-world.org [Institute of Occupational Medicine (IOM), Research Avenue North, Riccarton, Edinburgh EH14 4AP, Scotland (United Kingdom); Mackenbach, Johan P., E-mail: j.mackenbach@erasmusmc.nl [Department of Public Health, Erasmus MC, P.O. Box 2040, 3000 CA Rotterdam (Netherlands)

    2016-02-15

    Integrating human health into prospective impact assessments is known to be challenging. This is true for both approaches: dedicated health impact assessments (HIA) as well as inclusion of health into more general impact assessments. Acknowledging the full range of participatory, qualitative, and quantitative approaches, this study focuses on the latter, especially on computational tools for quantitative health modelling. We conducted a survey among tool developers concerning the status quo of development and availability of such tools; experiences made with model usage in real-life situations; and priorities for further development. Responding toolmaker groups described 17 such tools, most of them being maintained and reported as ready for use and covering a wide range of topics, including risk & protective factors, exposures, policies, and health outcomes. In recent years, existing models have been improved and were applied in new ways, and completely new models emerged. There was high agreement among respondents on the need to further develop methods for assessment of inequalities and uncertainty. The contribution of quantitative modeling to health foresight would benefit from building joint strategies of further tool development, improving the visibility of quantitative tools and methods, and engaging continuously with actual and potential users. - Highlights: • A survey investigated computational tools for health impact quantification. • Formal evaluation of such tools has been rare. • Handling inequalities and uncertainties are priority areas for further development. • Health foresight would benefit from tool developers and users forming a community. • Joint development strategies across computational tools are needed.

  9. Impact Assessment and Bioremediation of oil Contaminated Soil: A ...

    African Journals Online (AJOL)

    The research was conducted in two notable oil producing communities in. Niger Delta, South – South geopolitical zones of Nigeria with aim of assessing the impact and recommending a remediation technique for reclaiming the land for agricultural industrial, and residential purposes. The communities are; Ajoki Community ...

  10. Assessment of human impacts on landuse and vegetation cover ...

    African Journals Online (AJOL)

    This paper is an assessment of the impact of man's activities on the landuse and vegetation cover of Mubi region. Landsat MSS Landuse/vegetation image of 1978 and Spot XS landuse/vegetation image of 1995 were used to study the landuse/vegetation cover changes of the region between 1978 and 1995 – a period of 17 ...

  11. Coping with uncertainty in environmental impact assessments: Open techniques

    NARCIS (Netherlands)

    Chivatá Cárdenas, Ibsen; Halman, Johannes I.M.

    2016-01-01

    Uncertainty is virtually unavoidable in environmental impact assessments (EIAs). From the literature related to treating and managing uncertainty, we have identified specific techniques for coping with uncertainty in EIAs. Here, we have focused on basic steps in the decision-making process that take

  12. Groundwater Impacts of Radioactive Wastes and Associated Environmental Modeling Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Rui; Zheng, Chunmiao; Liu, Chongxuan

    2012-11-01

    This article provides a review of the major sources of radioactive wastes and their impacts on groundwater contamination. The review discusses the major biogeochemical processes that control the transport and fate of radionuclide contaminants in groundwater, and describe the evolution of mathematical models designed to simulate and assess the transport and transformation of radionuclides in groundwater.

  13. Impact assessment of adaptation options and strategies for coping ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Impact assessment of adaptation options and strategies for coping with climate change on the livelihoods of pastoral and agro-pastoral communities in Sudan' Butana area. Ibrahim, Abdelhamed M.M.. URI: http://hdl.handle.net/10625/53410. Date: 2013-11 ...

  14. Assessing the Impact of Financial Policies on Nigeria's Economic ...

    African Journals Online (AJOL)

    Assessing the Impact of Financial Policies on Nigeria's Economic Growth. ... Furthermore, it calls for effective implementation and monitoring of financial policies as well as adequate supervision of the financial sector by the relevant authorities to avoid lopsided compliance with financial and monetary guidelines. Keywords: ...

  15. Health impact assessment – A survey on quantifying tools

    International Nuclear Information System (INIS)

    Fehr, Rainer; Mekel, Odile C.L.; Fintan Hurley, J.; Mackenbach, Johan P.

    2016-01-01

    Integrating human health into prospective impact assessments is known to be challenging. This is true for both approaches: dedicated health impact assessments (HIA) as well as inclusion of health into more general impact assessments. Acknowledging the full range of participatory, qualitative, and quantitative approaches, this study focuses on the latter, especially on computational tools for quantitative health modelling. We conducted a survey among tool developers concerning the status quo of development and availability of such tools; experiences made with model usage in real-life situations; and priorities for further development. Responding toolmaker groups described 17 such tools, most of them being maintained and reported as ready for use and covering a wide range of topics, including risk & protective factors, exposures, policies, and health outcomes. In recent years, existing models have been improved and were applied in new ways, and completely new models emerged. There was high agreement among respondents on the need to further develop methods for assessment of inequalities and uncertainty. The contribution of quantitative modeling to health foresight would benefit from building joint strategies of further tool development, improving the visibility of quantitative tools and methods, and engaging continuously with actual and potential users. - Highlights: • A survey investigated computational tools for health impact quantification. • Formal evaluation of such tools has been rare. • Handling inequalities and uncertainties are priority areas for further development. • Health foresight would benefit from tool developers and users forming a community. • Joint development strategies across computational tools are needed.

  16. Assessing Human Impacts on the Greater Akaki River, Ethiopia ...

    African Journals Online (AJOL)

    We assessed the impacts of human activities on the Greater Akaki River using physicochemical parameters and macroinvertebrate metrics. Physicochemical samples and macroinvertebrates were collected bimonthly from eight sites established on the Greater Akaki River from February 2006 to April 2006. Eleven metrics ...

  17. An assessment of the impact of organizational culture on employee ...

    African Journals Online (AJOL)

    Understanding the dynamism of organizational culture and its relationship to employee performance is very crucial to organizational strategic objectives. The primary aim of this paper is to assessthe impact of organizational culture on employee performance. Literature review and library research are adopted to assess how ...

  18. Assessing the Impact of Current National Policies to Reduce Salt ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Assessing the Impact of Current National Policies to Reduce Salt and Trans Fatty Acids in Argentina ... The Codex Alimentarius, or international food safety standards, will also decrease trans fatty acids (TFA) ... Researchers will develop a strategy to share results with policymakers and other stakeholders. ... Journal articles.

  19. A data protection impact assessment methodology for cloud

    NARCIS (Netherlands)

    Stefanatou, Dimitra; Dalla Corte, Lorenzo; Leenes, Ronald

    2016-01-01

    We propose a data protection impact assessment (DPIA) method based on suc-cessive questionnaires for an initial screening and for a full screening for a given project. These were tailored to satisfy the needs of Small and Medium Enterprises (SMEs) that intend to process personal data in the cloud.

  20. Assessing climate change impacts on water balance in the Mount

    Indian Academy of Sciences (India)

    A statistical downscaling known for producing station-scale climate information from GCM output was preferred to evaluate the impacts of climate change within the Mount Makiling forest watershed, Philippines. The lumped hydrologic BROOK90 model was utilized for the water balance assessment of climate change ...

  1. Assessing environmental impacts of inland sand mining in parts of ...

    African Journals Online (AJOL)

    Sand is a valuable resource for construction and other purposes, however sand mining often result in serious environmental problems such as land degradation, loss of agricultural lands and biodiversity, as well increased poverty among people. This study assessed the environmental impacts of inland sand mining in six ...

  2. Disposal facility for spent nuclear fuel. Environmental impact assessment program

    International Nuclear Information System (INIS)

    1998-01-01

    The report presents the Environmental Impact Assessment (EIA) of the high level radioactive waste disposal in Finland. In EIA different alternatives concerning site selection, construction, operation and sealing of the disposal facility as well as waste transportation and encapsulation of the waste are considered

  3. Assessment of the Impact of Viticulture Extension Programs in Virginia

    Science.gov (United States)

    Ferreira, Gustavo F. C.; Hatch, Tremain; Wolf, Tony K.

    2016-01-01

    The study discussed in this article assessed the impact of Virginia Cooperative Extension (VCE) on the Virginia wine grape industry. An online survey was developed and administered to members of the Virginia Vineyards Association. The results indicate that the resources and recommendations VCE and Virginia Tech have provided have been beneficial…

  4. A Comparative Assessment of Life-Cycle Greenhouse Gas Emissions from Hypothetical Electric Airport Transportation Services in Thailand

    Science.gov (United States)

    Koiwanit, J.

    2018-05-01

    Global warming is an increase of average temperature in the atmosphere, which causes adverse effects on the environment. Carbon dioxide (CO2) from transportation sector is one of the main contributors of the overall greenhouse gases (GHG). To cope with this issue, electric car services are increasingly seen as popular alternative modes of green transportation especially for urban cities as it is more flexible, more environmentally-friendly, and less expensive than the use of conventional vehicles. The study analyses and compare the hypothetical electric car systems from airport transportation services. Center of Environmental Science of Leiden University (CML) 2001, the Life Cycle Impact Assessment (LCIA) method, is applied to convert life cycle inventory data into environmental impacts. The observed results showed that the electric shuttle bus had the highest impact in global warming potential (GWP) compared to other transportation types. Alternatively, this Life Cycle Assessment (LCA) study that evaluated different transportations provided important information for decision makers on quantifying the differences between each scenario.

  5. Climate change adaptation impact cost assessment in France

    International Nuclear Information System (INIS)

    2009-01-01

    This document reports the works of an inter-departmental group and of sector-based and transverse groups which aimed at assessing the impacts of climate change. After a first contribution about the assessment methodology, the works of sector-based groups and transverse groups are reported. These groups are dealing with agriculture, forest, infrastructures and built environment, tourism, energy, health, water, natural risks (and insurance and adaptation to climatic change in metropolitan France), biodiversity and land. For each of them, challenges, assessment approaches, first results and perspectives are discussed

  6. Methodology for assessing the radiological impact on environment

    International Nuclear Information System (INIS)

    Zhang Yongxing

    1988-01-01

    During the 1940s, the early stages of nuclear programmes, the assessment of the radionuclides released to the environment was first initiated for the large nuclear facilities, with emphasis placed on environmental monitoring. The radiological assessment is a quantitative process of estimating the impact on human, resulting from the releases of the radionuclides to the environment. It is a multidisciplinary subject including identification of source terms, environmental transport and dispersion, health effect evaluation and so on. This paper briefly, but comprehensively, describes the methodology for the assessment of the environmental radiological consequence, and discusses the trend of various research fields related to the subject

  7. Assessment of Environmental Impacts of Limestone Quarrying Operations in Thailand

    Directory of Open Access Journals (Sweden)

    Kittipongvises Suthirat

    2017-11-01

    Full Text Available Environmental impacts of the mineral extraction have been a public concern. Presently, there is widespread global interest in the area of mining and its sustainability that focused on the need to shift mining industry to a more sustainable framework. The aim of this study was to systematically assess all possible environmental and climate change related impacts of the limestone quarrying operation in Thailand. By considering the life cycle assessment method, the production processes were divided into three phases: raw material extraction, transportation, and comminution. Both IMPACT 2002+ and the Greenhouse Gas Protocol methods were used. Results of IMPACT 2002+ analysis showed that per 1 ton crushed limestone rock production, the total depletion of resource and GHGs emissions were 79.6 MJ and 2.76 kg CO2 eq., respectively. Regarding to the four damage categories, ‘resources’ and ‘climate change’ categories were the two greatest environmental impacts of the limestone rock production. Diesel fuel and electricity consumption in the mining processes were the main causes of those impacts. For climate change, the unit of CO2 eq. was expressed to quantify the total GHGs emissions. Estimated result was about 3.13 kg CO2 eq. per ton limestone rock product. The results obtained by the Greenhouse Gas Protocol were also similar to IMPACT 2002+ method. Electrical energy consumption was considered as the main driver of GHGs, accounting for approximately 46.8 % of total fossil fuel CO2 emissions. A final point should be noted that data uncertainties in environmental assessment over the complete life cycle of limestone quarrying operation have to be carefully considered.

  8. Assessment of Environmental Impacts of Limestone Quarrying Operations in Thailand

    Science.gov (United States)

    Kittipongvises, Suthirat

    2017-11-01

    Environmental impacts of the mineral extraction have been a public concern. Presently, there is widespread global interest in the area of mining and its sustainability that focused on the need to shift mining industry to a more sustainable framework. The aim of this study was to systematically assess all possible environmental and climate change related impacts of the limestone quarrying operation in Thailand. By considering the life cycle assessment method, the production processes were divided into three phases: raw material extraction, transportation, and comminution. Both IMPACT 2002+ and the Greenhouse Gas Protocol methods were used. Results of IMPACT 2002+ analysis showed that per 1 ton crushed limestone rock production, the total depletion of resource and GHGs emissions were 79.6 MJ and 2.76 kg CO2 eq., respectively. Regarding to the four damage categories, `resources' and `climate change' categories were the two greatest environmental impacts of the limestone rock production. Diesel fuel and electricity consumption in the mining processes were the main causes of those impacts. For climate change, the unit of CO2 eq. was expressed to quantify the total GHGs emissions. Estimated result was about 3.13 kg CO2 eq. per ton limestone rock product. The results obtained by the Greenhouse Gas Protocol were also similar to IMPACT 2002+ method. Electrical energy consumption was considered as the main driver of GHGs, accounting for approximately 46.8 % of total fossil fuel CO2 emissions. A final point should be noted that data uncertainties in environmental assessment over the complete life cycle of limestone quarrying operation have to be carefully considered.

  9. Hybrid life cycle assessment comparison of colloidal silica and cement grouted soil barrier remediation technologies

    Energy Technology Data Exchange (ETDEWEB)

    Gallagher, Patricia M., E-mail: pmg24@drexel.edu [Civil, Architectural and Environmental Engineering, Drexel University, 3141 Chestnut Street, Philadelphia, PA 19038 (United States); Spatari, Sabrina; Cucura, Jeffrey [Civil, Architectural and Environmental Engineering, Drexel University, 3141 Chestnut Street, Philadelphia, PA 19038 (United States)

    2013-04-15

    Highlights: ► We use LCA to study environmental impacts of grouting techniques for site remediation. ► We consider colloidal silica permeation grouting and cement jet grouting. ► Manufacturing and transportation contribute significantly in all impact categories. ► Activity outside of direct site activity is important in assessing impacts. ► LCA can be used to consider sustainability criteria for remediation decisions. -- Abstract: Site remediation involves balancing numerous costs and benefits but often neglects the environmental impacts over the entire project life cycle. Life cycle assessment (LCA) offers a framework for inclusion of global environmental “systems-level” decision metrics in combination with technological and cost analysis. We compare colloidal silica (CS) and cement grouted soil barrier remediation technologies for soils affected by low level radionuclides at a U.S. Superfund site using hybrid LCA methods. CS is a new, high performance grouting material installed using permeation grouting techniques. Cement, a more traditional grouting material, is typically installed using jet grouting techniques. Life cycle impacts were evaluated using the US EPA TRACI 2 model. Results show the highest life cycle environmental impacts for the CS barrier occur during materials production and transportation to the site. In general, the life cycle impacts for the cement barrier were dominated by materials production; however, in the extreme scenario the life cycle impacts were dominated by truck transportation of spoils to a distant, off-site radioactive waste facility. It is only in the extreme scenario tested in which soils are transported by truck (Option 2) that spoils waste transport dominates LCIA results. Life cycle environmental impacts for both grout barriers were most sensitive to resource input requirements for manufacturing volumes and transportation. Uncertainty associated with the efficacy of new technology such as CS over its required

  10. Hybrid life cycle assessment comparison of colloidal silica and cement grouted soil barrier remediation technologies

    International Nuclear Information System (INIS)

    Gallagher, Patricia M.; Spatari, Sabrina; Cucura, Jeffrey

    2013-01-01

    Highlights: ► We use LCA to study environmental impacts of grouting techniques for site remediation. ► We consider colloidal silica permeation grouting and cement jet grouting. ► Manufacturing and transportation contribute significantly in all impact categories. ► Activity outside of direct site activity is important in assessing impacts. ► LCA can be used to consider sustainability criteria for remediation decisions. -- Abstract: Site remediation involves balancing numerous costs and benefits but often neglects the environmental impacts over the entire project life cycle. Life cycle assessment (LCA) offers a framework for inclusion of global environmental “systems-level” decision metrics in combination with technological and cost analysis. We compare colloidal silica (CS) and cement grouted soil barrier remediation technologies for soils affected by low level radionuclides at a U.S. Superfund site using hybrid LCA methods. CS is a new, high performance grouting material installed using permeation grouting techniques. Cement, a more traditional grouting material, is typically installed using jet grouting techniques. Life cycle impacts were evaluated using the US EPA TRACI 2 model. Results show the highest life cycle environmental impacts for the CS barrier occur during materials production and transportation to the site. In general, the life cycle impacts for the cement barrier were dominated by materials production; however, in the extreme scenario the life cycle impacts were dominated by truck transportation of spoils to a distant, off-site radioactive waste facility. It is only in the extreme scenario tested in which soils are transported by truck (Option 2) that spoils waste transport dominates LCIA results. Life cycle environmental impacts for both grout barriers were most sensitive to resource input requirements for manufacturing volumes and transportation. Uncertainty associated with the efficacy of new technology such as CS over its required

  11. Alternatives and implication in process of environmental impact assessment

    Directory of Open Access Journals (Sweden)

    Tauš Peter

    2001-12-01

    Full Text Available EIA is an interactive, rule-based expert system for the environmental impact assessment. It is designed for a screening level assessment of development projects at a pre-feasibility stage. Typical problems for the evaluation include: resettlement; watershed degradation; encroachment upon precious ecosystems; encroachment on historical/cultural values; watershed erosion; reservoir siltation; impairment of navigation; changes in groundwater hydrology, waterlogging; seepage and evaporation losses; migration of valuable fish species; inundation of mineral resources/forests; other inundation losses and adverse effects. It is important to prevent environmental pollution when carrying out large-scale development projects, such as artificial change of landscapes and building of certain structures that may cause a tremendous impact on the environment. In accordance with Cities Environmental Impact Assessment Departments it is necessary to provide project organisers with a necessary advice and instructions concerning the environmental impact assessment a survey to predict and evaluate environmental impact to be conducted by project organisers. Prior to offering the advice and instructions, cities need to hear the opinions of residents of the areas concerned, mayors of related municipalities and other opinion leaders, including specialists, to reflect their views in the environmental preservation. The first aspect in any quality assessment is to determine the representativeness of data both in terms of physical siting and data collected. It must be recognised the environment is a dynamic fluid; quality therefore varies over space and time. There will be locations in any community that experience poorer quality than recorded at a monitoring station. Likewise other sites will have a better quality. Most communities have only a single monitoring site. Therefore, the air quality monitors are sited to provide a representative estimate of the community exposure

  12. Coping with uncertainty in environmental impact assessments: Open techniques

    Energy Technology Data Exchange (ETDEWEB)

    Cardenas, Ibsen C., E-mail: c.cardenas@utwente.nl [IceBridge Research Institutea, Universiteit Twente, P.O. Box 217, 7500 AE Enschede (Netherlands); Halman, Johannes I.M., E-mail: J.I.M.Halman@utwente.nl [Universiteit Twente, P.O. Box 217, 7500 AE Enschede (Netherlands)

    2016-09-15

    Uncertainty is virtually unavoidable in environmental impact assessments (EIAs). From the literature related to treating and managing uncertainty, we have identified specific techniques for coping with uncertainty in EIAs. Here, we have focused on basic steps in the decision-making process that take place within an EIA setting. More specifically, we have identified uncertainties involved in each decision-making step and discussed the extent to which these can be treated and managed in the context of an activity or project that may have environmental impacts. To further demonstrate the relevance of the techniques identified, we have examined the extent to which the EIA guidelines currently used in Colombia consider and provide guidance on managing the uncertainty involved in these assessments. Some points that should be considered in order to provide greater robustness in impact assessments in Colombia have been identified. These include the management of stakeholder values, the systematic generation of project options, and their associated impacts as well as the associated management actions, and the evaluation of uncertainties and assumptions. We believe that the relevant and specific techniques reported here can be a reference for future evaluations of other EIA guidelines in different countries. - Highlights: • uncertainty is unavoidable in environmental impact assessments, EIAs; • we have identified some open techniques to EIAs for treating and managing uncertainty in these assessments; • points for improvement that should be considered in order to provide greater robustness in EIAs in Colombia have been identified; • the paper provides substantiated a reference for possible examinations of EIAs guidelines in other countries.

  13. Coping with uncertainty in environmental impact assessments: Open techniques

    International Nuclear Information System (INIS)

    Cardenas, Ibsen C.; Halman, Johannes I.M.

    2016-01-01

    Uncertainty is virtually unavoidable in environmental impact assessments (EIAs). From the literature related to treating and managing uncertainty, we have identified specific techniques for coping with uncertainty in EIAs. Here, we have focused on basic steps in the decision-making process that take place within an EIA setting. More specifically, we have identified uncertainties involved in each decision-making step and discussed the extent to which these can be treated and managed in the context of an activity or project that may have environmental impacts. To further demonstrate the relevance of the techniques identified, we have examined the extent to which the EIA guidelines currently used in Colombia consider and provide guidance on managing the uncertainty involved in these assessments. Some points that should be considered in order to provide greater robustness in impact assessments in Colombia have been identified. These include the management of stakeholder values, the systematic generation of project options, and their associated impacts as well as the associated management actions, and the evaluation of uncertainties and assumptions. We believe that the relevant and specific techniques reported here can be a reference for future evaluations of other EIA guidelines in different countries. - Highlights: • uncertainty is unavoidable in environmental impact assessments, EIAs; • we have identified some open techniques to EIAs for treating and managing uncertainty in these assessments; • points for improvement that should be considered in order to provide greater robustness in EIAs in Colombia have been identified; • the paper provides substantiated a reference for possible examinations of EIAs guidelines in other countries.

  14. Olympic Dam project: assessment of the environmental impact

    International Nuclear Information System (INIS)

    1983-11-01

    The assessment report on the Environmental Impact Statement produced for the Olympic Dam project is intended to provide the South Australian Government with a comprehensive evaluation of the potential impact of the proposal and to make recommendations concerning the project to be negotiated with the Joint Venturers prior to approval of the EIS. The project involves the mining, processing and sale of products from the copper-uranium ore body at Olympic Dam on the Roxby Downs Station, South Australia. The report includes a description of the proposal, a description of the environment likely to be affected, a discussion of the potential impacts on that environment, a discussion of the adequacy of information presented in the EIS and a discussion of the acceptability of the environmental impacts. The Department has concluded that the pre-design proposal is acceptable on environmental grounds

  15. Health impact and damage cost assessment of pesticides in Europe.

    Science.gov (United States)

    Fantke, Peter; Friedrich, Rainer; Jolliet, Olivier

    2012-11-15

    Health impacts from pesticide use are of continuous concern in the European population, requiring a constant evaluation of European pesticide policy. However, health impacts have never been quantified accounting for specific crops contributing differently to overall human exposure as well as accounting for individual substances showing distinct environmental behavior and toxicity. We quantify health impacts and related damage costs from exposure to 133 pesticides applied in 24 European countries in 2003 adding up to almost 50% of the total pesticide mass applied in that year. Only 13 substances applied to 3 crop classes (grapes/vines, fruit trees, vegetables) contribute to 90% of the overall health impacts of about 2000 disability-adjusted life years in Europe per year corresponding to annual damage costs of 78 million Euro. Considering uncertainties along the full impact pathway mainly attributable to non-cancer dose-response relationships and residues in treated crops, we obtain an average burden of lifetime lost per person of 2.6 hours (95% confidence interval between 22 seconds and 45.3 days) or costs per person over lifetime of 12 Euro (95% confidence interval between 0.03 Euro and 5142 Euro), respectively. 33 of the 133 assessed substances accounting for 20% of health impacts in 2003 are now banned from the European market according to current legislation. The main limitation in assessing human health impacts from pesticides is related to the lack of systematic application data for all used substances. Since health impacts can be substantially influenced by the choice of pesticides, the need for more information about substance application becomes evident. Copyright © 2012 Elsevier Ltd. All rights reserved.

  16. Methodologies for assessing socio-economic impacts of climate change

    International Nuclear Information System (INIS)

    Smit, B.

    1993-01-01

    Much of the studies on climate change impacts have focused on physical and biological impacts, yet a knowledge of the social and economic impacts of climate change is likely to have a greater impact on the public and on policymakers. A conventional assessment of the impacts of climate change begins with scenarios of future climate, commonly derived from global climate models translated to a regional scale. Estimates of biophysical conditions provided by such scenarios provide a basis for analyses of human impacts, usually considered sector by sector. The scenario approach, although having considerable merit and appeal, has some noteworthy limitations. It encourages consideration of only a small set of scenarios, requires bold assumptions to be made about adjustments in human systems, provides little direct analysis of sensitivities of human social and economic systems to climate perturbations, and usually invokes the assumption that all factors other than climate are stable and have no synergistic effects on human systems. Conventional studies concentrate on average climate, yet climate is inherently variable. A common response to this situation is to propose further development of climate models, but this is not a sufficient or necessary condition for good and useful assessments of impacts on human activities. Different approaches to socioeconomic impact analysis are needed, and approaches should be considered that include identification of sensitivities in a social or ecological system, identification of critical threshold levels or critical speeds of change in variables, and exploration of alternative methodologies such as process studies, spatial and temporal analogues, and socio-economic systems modelling. 5 refs., 3 figs

  17. Impact assessment modelling of matter-less stressors in the context of Life Cycle Assessment

    NARCIS (Netherlands)

    Cucurachi, Stefano

    2014-01-01

    In the last three decades, the Life Cycle Assessment (LCA) framework has grown to establish itself as the leading tool for the assessment of the environmental impacts of product systems.LCA studies are now conducted globally both in and outside the academia and also used as a basis for policy

  18. Social impact assessment of sugar production operations in South Africa : a social life cycle assessment perspective

    OpenAIRE

    2013-01-01

    M.Tech. (Quality and Operations Management) This paper focuses on the social impact of the sugar industry in South Africa. A social impact assessment is a method that aims to assess social features of the product and their positive and negative aspects in terms of its processing of raw material to the final stages of its disposal. The objectives of the study were guided by the guidelines on social life cycle assessment of products of the South African Sugar Industry developed by the United...

  19. Parameters for assessing the aquatic environmental impact of cosmetic products.

    Science.gov (United States)

    Vita, N A; Brohem, C A; Canavez, A D P M; Oliveira, C F S; Kruger, O; Lorencini, M; Carvalho, C M

    2018-05-01

    The cosmetic industry's growing concern about the impact of its supply chain on the environment, sustainability of raw materials, and biodiversity increases the need to ensure that the final product has a lower environmental impact. The objective of this review is to summarize and compare the information available from international organizations and legislation regarding the main criteria used to assess raw materials for aquatic toxicity, as well as the most suitable alternative methods for obtaining assessment parameters. Using the literature available in databases, a review of the scientific literature and international legislation, this work discusses and compares the parameters established by international organizations such as the Environmental Protection Agency (EPA) and Cradle to Cradle (C2C), as well as European legislation, namely, European Regulation 1272/2008, for assessing environmental impact. Defining the ecotoxicity parameters of the main classes of raw materials in rinse-off cosmetic products can enable the development of products that are more environmentally sustainable, prioritizing substances with less environmental impact. Copyright © 2018 Elsevier B.V. All rights reserved.

  20. Economic risk assessment of drought impacts on irrigated agriculture

    Science.gov (United States)

    Lopez-Nicolas, A.; Pulido-Velazquez, M.; Macian-Sorribes, H.

    2017-07-01

    In this paper we present an innovative framework for an economic risk analysis of drought impacts on irrigated agriculture. It consists on the integration of three components: stochastic time series modelling for prediction of inflows and future reservoir storages at the beginning of the irrigation season; statistical regression for the evaluation of water deliveries based on projected inflows and storages; and econometric modelling for economic assessment of the production value of agriculture based on irrigation water deliveries and crop prices. Therefore, the effect of the price volatility can be isolated from the losses due to water scarcity in the assessment of the drought impacts. Monte Carlo simulations are applied to generate probability functions of inflows, which are translated into probabilities of storages, deliveries, and finally, production value of agriculture. The framework also allows the assessment of the value of mitigation measures as reduction of economic losses during droughts. The approach was applied to the Jucar river basin, a complex system affected by multiannual severe droughts, with irrigated agriculture as the main consumptive demand. Probability distributions of deliveries and production value were obtained for each irrigation season. In the majority of the irrigation districts, drought causes a significant economic impact. The increase of crop prices can partially offset the losses from the reduction of production due to water scarcity in some districts. Emergency wells contribute to mitigating the droughts' impacts on the Jucar river system.

  1. Environmental impact assessment of nuclear desalination plant at KANUPP

    International Nuclear Information System (INIS)

    Sleem, M.

    2010-01-01

    A Nuclear Desalination Demonstration Plant (NDDP) of 1600 m/sup 3//d capacity is being installed at Karachi Nuclear Power Plant (KANUPP). A Nuclear Desalination Plant (NDP) can impact the aquatic environment mainly by subjecting the aquatic life to possible temperature increase and salinity changes in the vicinity of the cooling water and brine discharges. Any wastewater effluent, which will be discharged from the NDDP, may have some adverse effects on the marine life and general environment. In order to protect the environment and comply with the requirement of the Pakistan Environmental Protection Agency (PEPA) an Environmental Impact Assessment (EIA) for the discharged effluent from NDDP was carried out. In the present work baseline study was carried out for project location, climate, water resources, and ecology. Checklist has been prepared for identification of possible environmental impacts of the project and marked as insignificant, small, moderate or major impact. Appropriate mitigation measures have been recommended that can be incorporated into the intended program to minimize environmental impacts identified during the assessment. Specific conclusions of the study and recommendations have also been provided in this paper.

  2. Cyber threat impact assessment and analysis for space vehicle architectures

    Science.gov (United States)

    McGraw, Robert M.; Fowler, Mark J.; Umphress, David; MacDonald, Richard A.

    2014-06-01

    This paper covers research into an assessment of potential impacts and techniques to detect and mitigate cyber attacks that affect the networks and control systems of space vehicles. Such systems, if subverted by malicious insiders, external hackers and/or supply chain threats, can be controlled in a manner to cause physical damage to the space platforms. Similar attacks on Earth-borne cyber physical systems include the Shamoon, Duqu, Flame and Stuxnet exploits. These have been used to bring down foreign power generation and refining systems. This paper discusses the potential impacts of similar cyber attacks on space-based platforms through the use of simulation models, including custom models developed in Python using SimPy and commercial SATCOM analysis tools, as an example STK/SOLIS. The paper discusses the architecture and fidelity of the simulation model that has been developed for performing the impact assessment. The paper walks through the application of an attack vector at the subsystem level and how it affects the control and orientation of the space vehicle. SimPy is used to model and extract raw impact data at the bus level, while STK/SOLIS is used to extract raw impact data at the subsystem level and to visually display the effect on the physical plant of the space vehicle.

  3. A Contribution to the Built Heritage Environmental Impact Assessment

    Science.gov (United States)

    Žarnić, R.; Rajčić, V.; Skordaki, N.

    2015-08-01

    The understanding and assessment of environmental impact on heritage assets is of the highest importance for heritage preservation through well-organized maintenance based on proper decision-making. The effort towards development of protocol that would enable comparison of data on heritage assets in Europe and Mediterranean countries was done through EU Project European Cultural Heritage Identity Card. The special attention was paid to classification of environmental and man-induced risks to heritage. In the present paper the idea of EU CHIC is presented. Environmental risks are discussed in context of their influence on structure of heritage buildings that are exposed to sudden environmental impacts.

  4. Comparative environmental assessment of current and future electricity supply technologies for Switzerland

    International Nuclear Information System (INIS)

    Bauer, C.; Dones, R.; Heck, T.; Hirschberg, S.

    2007-01-01

    The environmental performance of a portfolio of eighteen technologies for electricity generation including renewable, fossil, and nuclear systems was analyzed for two reference years 2000 and 2030. The assessment covers large centralized and smaller decentralized power plants in Switzerland and few other European countries (for electricity imports). Evolutionary technology development was assumed between today and 2030. Full life cycle inventories were established for all energy chains, using 'ecoinvent' as the background inventory database. The average European electricity mix in 2030 was adapted using a business-as-usual scenario. The environmental assessment was part of a more comprehensive interdisciplinary sustainability evaluation using a multi-criteria decision analysis (MCDA) approach. Results from this evaluation for the environment area alone are herewith compared using Eco-indicator'99 as representative LCIA method as well as external cost assessment. In general the rankings from different aggregation methodologies converge when considering common indicators. However, putting different emphasis or weight on impact categories and individual indicators introduces variation in the ranking. Superior environmental performance of hydro power is ascertained by all approaches. Nuclear follows hydro as top performer based on Eco-indicator 99 (H, A) and external costs. Fossil systems score worst and biomass shows mostly worse performance than other renewables. (author)

  5. Environmental Impact Assessment of a Water Transfer Project

    Directory of Open Access Journals (Sweden)

    Pazoki

    2015-07-01

    Full Text Available Background Reliable water supplies for drinking and agriculture are some of the objectives for the sustainable development of every country. However, constructed facilities such as dams and irrigation networks and drainage can exert positive and negative effects directly or indirectly on the environment. The environmental impact assessment is a method for identifying the positive and negative effects caused by a plan and suggests performance management best practices aimed at lessening the negative impacts and augmenting the positive ones. Objectives The present study sought to evaluate the environmental impacts of the water transfer project of the Jooban Dam in two phases of preparation and operation. Materials and Methods A checklist containing the positive, negative, short-term, and long-term effects as well as the continuation and probable occurrence of these effects was used. Results The results showed that the negative environmental and social impacts of the project outweighed the positive impacts in terms of type, number, and intensity. Conclusions Unless there are well-thought out strategies for minimizing the undesirable impact on the environment, it is not advisable that such projects be permitted.

  6. Impact of self-assessment by students on their learning.

    Science.gov (United States)

    Sharma, Rajeev; Jain, Amit; Gupta, Naveenta; Garg, Sonia; Batta, Meenal; Dhir, Shashi Kant

    2016-01-01

    Tutor assessment is sometimes also considered as an exercise of power by the assessor over assesses. Student self-assessment is the process by which the students gather information about and reflect on their own learning and is considered to be a very important component of learning. The primary objective of this study was to analyze the impact of self-assessment by undergraduate medical students on their subsequent academic performance. The secondary objective was to obtain the perception of students and faculty about self-assessment as a tool for enhanced learning. The study was based on the evaluation of two theory tests consisting of both essay type and short answer questions, administered to students of the 1(st) year MBBS (n = 89). They self-assessed their performance after 3 days of the first test followed by marking of faculty and feedback. Then, a nonidentical theory test on the same topic with the same difficulty level was conducted after 7 days and assessed by the teachers. The feedback about the perception of students and faculty about this intervention was obtained. Significant improvement in the academic performance after the process of self-assessment was observed (P academic performance, helping them in development of critical skills for analysis of their own work.

  7. The challenges of risk society for impact assessment

    DEFF Research Database (Denmark)

    Larsen, Sanne Vammen

    2017-01-01

    , the challenge of delivering assessments and predictions and the challenge of handling differences of opinion and debate. Through a case example of integration of climate change in strategic environmental assessment, the paper uses empirical evidence from a survey and a series of interviews to carry out......This paper takes its point of departure in Ulrich Beck’s theory of risk society and the aspects that characterise this society. The paper puts forward a hypothe- sis, on which theoretical challenges the characteristics of risk society pose to impact assessment as a decision support tool; namely...... a preliminary discussion of how the theoretical challenges are reflected in practice. The case study results show that the challenge of delivering assessments and predictions in a risk society is reflected in the current state of practice, while the challenge of handling differences of opinion and debate...

  8. Improving environmental impact and cost assessment for supplier evaluation

    Science.gov (United States)

    Beucker, Severin; Lang, Claus

    2004-02-01

    Improving a company"s environmental and financial performance necessitates the evaluation of environmental impacts deriving from the production and cost effects of corporate actions. These effects have to be made transparent and concrete targets have to be developed. Such an evaluation has to be done on a regular basis but with limited expenses. To achieve this, different instruments of environmental controlling such as LCA and environmental performance indicators have to be combined with methods from cost accounting. Within the research project CARE (Computer Aided Resource Efficiency Accounting for Medium-Sized Enterprises), the method Resource Efficiency Accounting (REA) is used to give the participating companies new insights into hidden costs and environmental effects of their production and products. The method combines process based cost accounting with environmental impact assessment methodology and offers results that can be integrated into a company"s environmental controlling system and business processes like cost accounting, supplier assessment, etc. Much of the data necessary for the combined assessment can be available within a company"s IT system and therefore can be efficiently used for the assessment process. The project CARE puts a strong focus on the use of company data and information systems for the described assessment process and offers a methodological background for the evaluation and the structuring of such data. Besides the general approach of the project CARE the paper will present results from a case study in which the described approach is used for the evaluation of suppliers.

  9. Radiological impact assessment in Malaysia using RESRAD computer code

    International Nuclear Information System (INIS)

    Syed Hakimi Sakuma Syed Ahmad; Khairuddin Mohamad Kontol; Razali Hamzah

    1999-01-01

    Radiological Impact Assessment (RIA) can be conducted in Malaysia by using the RESRAD computer code developed by Argonne National Laboratory, U.S.A. The code can do analysis to derive site specific guidelines for allowable residual concentrations of radionuclides in soil. Concepts of the RIA in the context of waste management concern in Malaysia, some regulatory information and assess status of data collection are shown. Appropriate use scenarios and site specific parameters are used as much as possible so as to be realistic so that will reasonably ensure that individual dose limits and or constraints will be achieved. Case study have been conducted to fulfil Atomic Energy Licensing Board (AELB) requirements where for disposal purpose the operator must be required to carry out. a radiological impact assessment to all proposed disposals. This is to demonstrate that no member of public will be exposed to more than 1 mSv/year from all activities. Results obtained from analyses show the RESRAD computer code is able to calculate doses, risks, and guideline values. Sensitivity analysis by the computer code shows that the parameters used as input are justified so as to improve confidence to the public and the AELB the results of the analysis. The computer code can also be used as an initial assessment to conduct screening assessment in order to determine a proper disposal site. (Author)

  10. Environmental impact assessment of the Krapivino hydro development

    International Nuclear Information System (INIS)

    Kayakin, V.V.; Mulina, A.V.; Novozilov, A.P.

    1993-01-01

    An environmental impact assessment (EIA) of planned measures in one or another form has always been carried out during project studies for hydrotechnical construction. In this paper, the experience is presented of drawing up the open-quotes EIAclose quotes section of the Krapivino hydroelectric development project as a result of substantial transformation of the project after its public discussion and stopping construction in 1989. Topics of discussion of this paper include the ecological situation and means of solving the problem, ecological and economic assessment of the program of measures, and ways of adaptation of the projects and solution of controversial problems. 6 figs., 1 tab

  11. Impact of Constant Rate Factor on Objective Video Quality Assessment

    Directory of Open Access Journals (Sweden)

    Juraj Bienik

    2017-01-01

    Full Text Available This paper deals with the impact of constant rate factor value on the objective video quality assessment using PSNR and SSIM metrics. Compression efficiency of H.264 and H.265 codecs defined by different Constant rate factor (CRF values was tested. The assessment was done for eight types of video sequences depending on content for High Definition (HD, Full HD (FHD and Ultra HD (UHD resolution. Finally, performance of both mentioned codecs with emphasis on compression ratio and efficiency of coding was compared.

  12. A probabilistic approach to Radiological Environmental Impact Assessment

    International Nuclear Information System (INIS)

    Avila, Rodolfo; Larsson, Carl-Magnus

    2001-01-01

    Since a radiological environmental impact assessment typically relies on limited data and poorly based extrapolation methods, point estimations, as implied by a deterministic approach, do not suffice. To be of practical use for risk management, it is necessary to quantify the uncertainty margins of the estimates as well. In this paper we discuss how to work out a probabilistic approach for dealing with uncertainties in assessments of the radiological risks to non-human biota of a radioactive contamination. Possible strategies for deriving the relevant probability distribution functions from available empirical data and theoretical knowledge are outlined

  13. Forensic DNA phenotyping: Developing a model privacy impact assessment.

    Science.gov (United States)

    Scudder, Nathan; McNevin, Dennis; Kelty, Sally F; Walsh, Simon J; Robertson, James

    2018-05-01

    Forensic scientists around the world are adopting new technology platforms capable of efficiently analysing a larger proportion of the human genome. Undertaking this analysis could provide significant operational benefits, particularly in giving investigators more information about the donor of genetic material, a particularly useful investigative lead. Such information could include predicting externally visible characteristics such as eye and hair colour, as well as biogeographical ancestry. This article looks at the adoption of this new technology from a privacy perspective, using this to inform and critique the application of a Privacy Impact Assessment to this emerging technology. Noting the benefits and limitations, the article develops a number of themes that would influence a model Privacy Impact Assessment as a contextual framework for forensic laboratories and law enforcement agencies considering implementing forensic DNA phenotyping for operational use. Copyright © 2018 Elsevier B.V. All rights reserved.

  14. Thermal impact assessment of multi power plant operations on estuaries

    International Nuclear Information System (INIS)

    Eraslan, A.H.; Kim, K.H.; Harris, J.L.

    1977-01-01

    The assessment of the thermal impact of multi power plant operations on large estuaries requires careful consideration of the problems associated with: re-entrainment, re-circulation, thermal interaction, delay in the attainment of thermal equilibrium state, and uncertainty in specifying open boundaries and open boundary conditions of the regions, which are critically important in the analysis of the thermal conditions in receiving water bodies with tidal dominated, periodically reversing flow conditions. The results of an extensive study in the Hudson River at Indian Point, 42 miles upstream of the ocean end at the Battery, concluded that the tidal-transient, multi-dimensional discrete-element (UTA) thermal transport models (ESTONE, FLOTWO, TMPTWO computer codes) and the near-field far-field zone-matching methodology can be employed with a high degree of reliability in the assessment of the thermal impact of multi power plant operations on tidal dominated estuaries

  15. A model for assessing social impacts of nuclear technology

    International Nuclear Information System (INIS)

    Suzuki, Atsuyuki; Kiyose, Ryohei

    1981-01-01

    A theoretical framework is given for assessing the social or environmental impacts of nuclear technology. A two-act problem concerning the incentive-penalty system is supposed to formulate the principle of ALAP. An observation plan to make decision on the problem is optimized with the Bayseian decision theory. The optimized solution resting on the amount of incentive or penalty is compared with an actual or practical plan. Then, by finding the indifference between the two plans, an impact is assessed in monetary terms. As regards the third step, the model does not provide the details since it is beyond the scope of the description. If there exists an actual plan, it can be easily compared with the results from this theory. If there does not or in the process of making it, its feasibility must be studied by another model or by different approaches. (J.P.N.)

  16. Landscape impact assessment of wind farm development in Dyfed

    International Nuclear Information System (INIS)

    Blandford, C.; White, S.; Garrad, A.D.; Morgan, C.A.

    1992-01-01

    Chris Blandford Associates, in association with Garrad Hassan and Partners, was commissioned to carry out a landscape impact assessment of wind turbine development in Dyfed. The study aims to identify those areas in Dyfed where, in terms of landscape impact, local authorities might seek either to exclude or encourage wind turbine development; provide guidelines to assist local authorities in judging the impact of wind turbine developments on the landscape; provide a basis and framework for the preparation of planning policy guidelines for acceptable wind turbine and wind farm developments in Dyfed. The study context reviews current Government energy and planning policies for the encouragement of wind turbine developments, as set out in the ''non-fossil fuel obligation'' and the draft planning policy guidance note for renewable energy published last December. (author)

  17. Methodology for impact assessment in the estuarine/marine environment

    International Nuclear Information System (INIS)

    Haven, K.F.

    1975-01-01

    Impacts on the estuarine/marine environment can be assessed in economic terms by tracing the impact flow out of the economic sector through the marine environment and back into the economic sector as changes in natural resource availability. An impact can then be measured by the changes created in the economic sector by changes in resource availability. Primary emphasis is placed on the development of an appropriate ecological model of the estuarine environment for this purpose. Two types, an ecological input/output model and a dynamic (difference equation) model, are proposed. Acceptability criteria for these models include the ability to track lethal and sublethal, direct and indirect (food web), and short- and long-term effects of a variety of pollutants related to the production and use of various energy resources

  18. Health impact assessment of climate change in Bangladesh

    International Nuclear Information System (INIS)

    Nelson, Deborah Imel

    2003-01-01

    Global climate change (GCC) may have serious and irreversible impacts. Improved methods are needed to predict and quantify health impacts, so that appropriate risk management strategies can be focused on vulnerable areas. The disability-adjusted life year (DALY) is proposed as an effective tool in environmental health impact assessment (HIA). The DALY accounts for years of life lost to premature death and/or morbidity. Both the DALY and the determinants-of-health approach are applied to HIA of GCC in Bangladesh. Based on historical data, a major storm event may result in approximately 290 DALY per 1000 population, including both deaths and injuries, compared to a current all-cause rate of about 280 per 1000 in the region. A more precise result would require a large input of data; however, this level of analysis may be sufficient to rank risks, and to motivate and target risk management efforts

  19. Environmental impact assessment for surface coal mine - a case study

    International Nuclear Information System (INIS)

    Sen, P.; Chakraborty, K.

    1994-01-01

    Surface coal mines being the largest contributor to the national coal production, the study of environmental impacts due to this becomes mandatory as it will help in proper planning and safe operations of the mine in an environmentally compatible manner. Within the scope of this paper, a model for preparation of comprehensive environmental impact assessment (EIA) by utilising a new evaluation methodology leading to determination of Environmental Quality Designation an index has been developed and this model has been validated by using data from a running surface coal mine in Wardha Valley Coalfield. Based on this exercise, the overall impact of the surface coal mine under consideration on environment indicates a medium level and accordingly the control measures have to be planned. Thus repair to the environment has to be made a concurrent activity with mining i.e. to say we have to design with nature not against it

  20. Environmental Impact Assessment in the Visegrad Group countries

    Energy Technology Data Exchange (ETDEWEB)

    Gałaś, Slávka, E-mail: sgalas@geol.agh.edu.pl [AGH University of Science and Technology, Faculty of Geology, Geophysics and Environmental Protection, Department of Environmental Analysis, Cartography and Economic Geology Al. Mickiewicza 30, 30 059 Krakow (Poland); Gałaś, Andrzej, E-mail: pollux@geol.agh.edu.pl [AGH University of Science and Technology, Faculty of Geology, Geophysics and Environmental Protection, Department of Environmental Analysis, Cartography and Economic Geology Al. Mickiewicza 30, 30 059 Krakow (Poland); Zeleňáková, Martina, E-mail: martina.zelenakova@tuke.sk [Technical University of Košice, Faculty of Civil Engineering, Institute of Environmental Engineering, Vysokoškolská 4, 042 00 Košice (Slovakia); Zvijáková, Lenka, E-mail: lenkazvijakova@gmail.com [Technical University of Košice, Faculty of Civil Engineering, Institute of Environmental Engineering, Vysokoškolská 4, 042 00 Košice (Slovakia); Fialová, Jitka, E-mail: jitka.fialova@mendelu.cz [Mendel University in Brno, Faculty of Forestry and Wood Technology, Department of Landscape Management, Zemědělská 3, 613 00 Brno (Czech Republic); and others

    2015-11-15

    Highlights: • Comparison and evaluation of EIA systems in the V4 countries are presented. • Strengths and weaknesses of EIA systems based on a questionnaire survey are stated. • The function and efficiency of the EIA application in the V4 countries are analysed. • Irregularities and shortcomings of EIA systems in the V4 should be eliminated. The Environmental Impact Assessment Directive (EIA Directive) has created a reference framework for the implementation of the system of Environmental Impact Assessment (EIA) into the legal systems of the Member States of the European Union, including the countries belonging to the Visegrad Group (V4): Poland, Slovakia, the Czech Republic and Hungary. The Directive was the basis for the introduction of compulsory stages of the EIA process in the V4. The stages were then adapted to national requirements, including thresholds of the qualifying criteria of projects at the screening and scoping stages. The EIA system in the analysed countries has been growing, changing and being modified together with the political and economic changes of the last 30 years. Although all Visegrad Group countries are members of the EU and should harmonize the provisions of the EIA Directive and its amendments, there still exist singularities in each country's national EIA legislation, in terms of complementarities among the V4 countries, access to information resources, protection of natural resources, mitigation of socio-environmental impacts, or transboundary impact assessment. The article compares and evaluates the EIA systems in the four countries, specifies similarities and differences in the implementation of administrative proceedings and points out opportunities to strengthen the system. It presents selected results of a study conducted in 2013 within the framework of the international project “Assessment of the quality of the environment in the V4 Countries” (AQE V4). This paper indicates examples of good practice in the EIA

  1. Assessing the Impact of Imperfect Diagnosis on Service Reliability

    DEFF Research Database (Denmark)

    Grønbæk, Lars Jesper; Schwefel, Hans-Peter; Kjærgaard, Jens Kristian

    2010-01-01

    , representative diagnosis performance metrics have been defined and their closed-form solutions obtained for the Markov model. These equations enable model parameterization from traces of implemented diagnosis components. The diagnosis model has been integrated in a reliability model assessing the impact...... of the diagnosis functions for the studied reliability problem. In a simulation study we finally analyze trade-off properties of diagnosis heuristics from literature, map them to the analytic Markov model, and investigate its suitability for service reliability optimization....

  2. Health Impact Assessment of an oil drilling project in California

    OpenAIRE

    Lindsay C. McCallum; Kathleen Souweine; Mary McDaniel; Bart Koppe; Christine McFarland; Katherine Butler; Christopher A. Ollson

    2016-01-01

    Objectives: The Health Impact Assessment (HIA) was conducted to evaluate the potential community health implications of a proposed oil drilling and production project in Hermosa Beach, California. The HIA considered 17 determinants of health that fell under 6 major categories (i.e., air quality, water and soil quality, upset conditions, noise and light emissions, traffic, and community livability). Material and Methods: This paper attempts to address some of the gaps within the HIA practice b...

  3. PUBLIC PARTICIPATION IN THE CHINESE ENVIRONMENTAL IMPACT ASSESSMENT (EIA) SYSTEM

    OpenAIRE

    SHANSHAN YANG

    2008-01-01

    This article was initiated by findings that public participation in the Chinese Environmental Impact Assessment (EIA) system has not been effectively carried out. The article first introduces the research rationale and theoretical basis. It then reviews and analyses public participation in the Chinese EIA system, including its history, legal and institutional requirements and problems. Thirdly it puts forward suggestions for promoting public participation in the Chinese EIA system taking into...

  4. Environmental Impact Assessment in the Visegrad Group countries

    International Nuclear Information System (INIS)

    Gałaś, Slávka; Gałaś, Andrzej; Zeleňáková, Martina; Zvijáková, Lenka; Fialová, Jitka

    2015-01-01

    Highlights: • Comparison and evaluation of EIA systems in the V4 countries are presented. • Strengths and weaknesses of EIA systems based on a questionnaire survey are stated. • The function and efficiency of the EIA application in the V4 countries are analysed. • Irregularities and shortcomings of EIA systems in the V4 should be eliminated. The Environmental Impact Assessment Directive (EIA Directive) has created a reference framework for the implementation of the system of Environmental Impact Assessment (EIA) into the legal systems of the Member States of the European Union, including the countries belonging to the Visegrad Group (V4): Poland, Slovakia, the Czech Republic and Hungary. The Directive was the basis for the introduction of compulsory stages of the EIA process in the V4. The stages were then adapted to national requirements, including thresholds of the qualifying criteria of projects at the screening and scoping stages. The EIA system in the analysed countries has been growing, changing and being modified together with the political and economic changes of the last 30 years. Although all Visegrad Group countries are members of the EU and should harmonize the provisions of the EIA Directive and its amendments, there still exist singularities in each country's national EIA legislation, in terms of complementarities among the V4 countries, access to information resources, protection of natural resources, mitigation of socio-environmental impacts, or transboundary impact assessment. The article compares and evaluates the EIA systems in the four countries, specifies similarities and differences in the implementation of administrative proceedings and points out opportunities to strengthen the system. It presents selected results of a study conducted in 2013 within the framework of the international project “Assessment of the quality of the environment in the V4 Countries” (AQE V4). This paper indicates examples of good practice in the EIA

  5. Uncertainty in Impact Assessment – EIA in Denmark

    DEFF Research Database (Denmark)

    Larsen, Sanne Vammen

    as problematic, as this is important information for decision makers and public actors. Taking point of departure in these issues, this paper seeks to add to the discussions by presenting the results of a study on the handling of uncertainty in Environmental Impact Assessment (EIA) reports in Denmark. The study...... is based on analysis of 100 EIA reports. The results will shed light on the extent to which uncertainties is addressed in EIA in Denmark and discuss how the practice can be categorised....

  6. Assessing impact of blanket interventions for MAM prevention

    International Nuclear Information System (INIS)

    Grais, Rebecca F.; Isanaka, I; Langendorf, C; Roederer, T

    2014-01-01

    Full text: Blanket interventions for MAM prevention (Blanket supplementary feeding programming (BSFP)) provide a supplementary food ration often accompanied by a basic medical treatment and prevention package to a vulnerable population for a defined period in a defined geographic location. There is little strong evidence on the impact of BSFP on rates of malnutrition and mortality, and scare guidance on program monitoring and evaluation to improve the implementation of specific programs. Assessing the impact of BSFP has been fraught with difficulty. Their isolated impact is difficult, if not often impossible to disentangle from larger care and prevention packages, the objectives of BSFP may vary by context, implementing agency, time and geography. Various and often multiple co-morbidities among children in the targeted group complicate matters further with respect to impact assessment. This leads to difficulties in generalizing results from one context to another and the need for more complex metrics to guide operational decision-making. Ideally, impact or effectiveness of BSFP should be addressed in a research framework where appropriate and complete data is collected in order to address specific questions. The gold standard is the conduct of randomized studies including a control group. These studies have been scarce as they may be perceived as either rarely feasible or not ethical or both. However, as generating evidence on impact of BSFP is essential to provide operational guidance, these studies should be encouraged through a diversity of robust, yet creative and pragmatic, methodological approaches. As a case study, a series of studies conducted over the past decade are reviewed in the same location in Niger highlighting the lessons learned. (author)

  7. Environmental impact assessment as a complement of life cycle assessment. Case study: Upgrading of biogas.

    Science.gov (United States)

    Morero, Betzabet; Rodriguez, María B; Campanella, Enrique A

    2015-08-01

    This work presents a comparison between an environmental impact assessment (EIA) and a life cycle assessment (LCA) using a case study: upgrading of biogas. The upgrading of biogas is studied using three solvents: water, physical solvent and amine. The EIA follows the requirements of the legislation of Santa Fe Province (Argentina), and the LCA follows ISO 14040. The LCA results showed that water produces a minor impact in most of the considered categories whereas the high impact in the process with amines is the result of its high energy consumptions. The positive results obtained in the EIA (mainly associated with the cultural and socioeconomic components) make the project feasible and all the negative impacts can be mitigated by preventive and remedial measures. From the strengths and weaknesses of each tool, it is inferred that the EIA is a procedure that can complement the LCA. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. Assessment of Light Pollution Impact on Protected Areas in China

    Science.gov (United States)

    Jiang, W.; He, G.; Ni, Y.

    2017-09-01

    The Protected Areas (PAs) with natural, ecological and cultural value play important role in biological processes, biodiversity and ecosystem service. During the past years of rapid urban expansion in China, the spatial range and intensity of light pollution unprecedented increase. Historically, optical remote sensing and field survey data had been used to reveal that human activities impacted on PAs for individual areas and few papers documented the issue of light pollution impact on PAs at national scale. Here, time series night-time light satellite images of Defense Meteorological Satellite Program Operational Linescan System (DMSP-OLS) were selected to assess the light pollution impacted on PAs in China. The method we proposed can be effectively applied to assess the impact of light pollution on PAs and the percent of dark PAs decreased by 35.38 % from 1992 to 2012 at nationwide. The trend of light pollution of most PAs in stable, however, light pollution of the local area is increase significantly, especially in northern Xinjiang, Gansu, Xizang, Yunnan, Jiangsu and Shandong. Considering the current status of light pollution encroach into PAs, two strategies of appropriate buffer zone and wide measured for light pollution are also recommend.

  9. Health impact assessment: where does the law come in?

    International Nuclear Information System (INIS)

    Hart, David Q.C.

    2004-01-01

    The European Convention on Human Rights has profound implications for HIA. Public authorities have a positive obligation to stop others from infringing citizens' rights to life and to respect for private and family life. These rights are qualified and have now been interpreted in many thousands of cases. Authorities must, as best they reasonably can, secure the safety of citizens and inform the citizens about the safety or otherwise of any development. Authorities have to strike a balance between the individuals rights and the public benefit. Any public authority before approving a scheme or reaching a regulatory decision which may impact on human rights must consider the nature of that impact, its seriousness and whether it can be justified on public interest grounds. A number of court judgements in cases concerning these issues are discussed. This article is not about how certain of the ideas underlying Health Impact Assessment, in certain circumstances, are or can be incorporated in existing legally recognised instruments such as Environmental Impact Assessments. Nor is it about the statutory powers which authorities--local and national--could, if so inclined, exercise, to further the health and well-being of their constituents. It is about something rather more general, important and yet rather formless, namely the duties identified by the European Court of Human Rights as resting upon public authorities to take steps to safeguard the public health rights of their citizens

  10. Mutagenesis and teratogenesis as end points in health impact assessment

    International Nuclear Information System (INIS)

    Bender, M.A.

    1976-01-01

    The genetic and teratogenic effects of agents released to the environment as a consequence of energy production are exceedingly difficult to evaluate. Nevertheless, these effects on human health may be very costly in the context of cost-benefit analysis. In fact, the procedures required to limit mutagenic or teratogenic agents to the levels considered acceptable by regulatory bodies may constitute a major fraction of the cost of energy, especially where prudence dictates that a lack of empirical data requires extremely conservative regulations. Experience with ionizing radiation and with regulation of nuclear power installations illustrates the difficulty of genetic and teratogenic health impact assessment and the great uncertainties involved, as well as the influence of these impacts on the regulatory process and the consequent increased cost of power from this source. Data on genetic and teratogenic impacts on human health from chemical agents released to the environment by other energy technologies are much less complete, and, because of the large number of potentially active agents involved, it is evident that generic solutions to health impact assessment will be required to evaluate these energy alternatives

  11. Assessment of environmental impacts following alternative agricultural policy scenarios.

    Science.gov (United States)

    Bárlund, I; Lehtonen, H; Tattari, S

    2005-01-01

    Abstract Finnish agriculture is likely to undergo major changes in the near and intermediate future. The ifuture policy context can be examined at a general level by strategic scenario building. Computer-based modelling in combination with agricultural policy scenarios can in turn create a basis for the assessments of changes in environmental quality following possible changes in Finnish agriculture. The analysis of economic consequences is based on the DREMFIA model, which is applied to study effects of various agricultural policies on land use, animal production, and farmers' income. The model is suitable for an impact analysis covering an extended time span--here up to the year 2015. The changes in land use, obtained with the DREMFIA model assuming rational economic behaviour, form the basis when evaluating environmental impacts of different agricultural policies. The environmental impact assessment is performed using the field scale nutrient transport model ICECREAM. The modelled variables are nitrogen and phosphorus losses in surface runoff and percolation. In this paper the modelling strategy will be presented and highlighted using two case study catchments with varying environmental conditions and land use as an example. In addition, the paper identifies issues arising when connecting policy scenarios with impact modelling.

  12. Risk assessment by dynamic representation of vulnerability, exploitation, and impact

    Science.gov (United States)

    Cam, Hasan

    2015-05-01

    Assessing and quantifying cyber risk accurately in real-time is essential to providing security and mission assurance in any system and network. This paper presents a modeling and dynamic analysis approach to assessing cyber risk of a network in real-time by representing dynamically its vulnerabilities, exploitations, and impact using integrated Bayesian network and Markov models. Given the set of vulnerabilities detected by a vulnerability scanner in a network, this paper addresses how its risk can be assessed by estimating in real-time the exploit likelihood and impact of vulnerability exploitation on the network, based on real-time observations and measurements over the network. The dynamic representation of the network in terms of its vulnerabilities, sensor measurements, and observations is constructed dynamically using the integrated Bayesian network and Markov models. The transition rates of outgoing and incoming links of states in hidden Markov models are used in determining exploit likelihood and impact of attacks, whereas emission rates help quantify the attack states of vulnerabilities. Simulation results show the quantification and evolving risk scores over time for individual and aggregated vulnerabilities of a network.

  13. Impact assessment of waste management options in Singapore.

    Science.gov (United States)

    Tan, Reginald B H; Khoo, Hsien H

    2006-03-01

    This paper describes the application of life cycle assessment for evaluating various waste management options in Singapore, a small-island city state. The impact assessment method by SimaPro is carried out for comparing the potential environmental impacts of waste treatment options including landfilling, incineration, recycling, and composting. The inventory data include gases and leachate from landfills, air emissions and energy recovery from incinerators, energy (and emission) savings from recycling, composting gases, and transport pollution. The impact assessment results for climate change, acidification, and ecotoxicity show that the incineration of materials imposes considerable harm to both human health and the environment, especially for the burning of plastics, paper/cardboard, and ferrous metals. The results also show that, although some amount of energy can be derived from the incineration of wastes, these benefits are outweighed by the air pollution (heavy metals and dioxins/furans) that incinerators produce. For Singapore, landfill gases and leachate generate minimal environmental damage because of the nation's policy to landfill only 10% of the total disposed wastes. Land transportation and separation of waste materials also pose minimal environmental damage. However, sea transportation to the landfill could contribute significantly to acidification because of the emissions of sulfur oxides and nitrogen oxides from barges. The composting of horticultural wastes hardly imposes any environmental damage. Out of all the waste strategies, the recycling of wastes offers the best solution for environmental protection and improved human health for the nation. Significant emission savings can be realized through recycling.

  14. Preliminary impact assessment of effusive eruptions at Etna volcano

    Science.gov (United States)

    Cappello, Annalisa; Michaud-Dubuy, Audrey; Branca, Stefano; De Beni, Emanuela; Del Negro, Ciro

    2016-04-01

    Lava flows are a recurring and widespread form of volcanic activity that threaten people and property around the world. The growing demographic congestion around volcanic structures increases the potential risks and costs that lava flows represent, and leads to a pressing need for faster and more accurate assessment of lava flow impact. To fully evaluate potential effects and losses that an effusive eruption may cause to society, property and environment, it is necessary to consider the hazard, the distribution of the exposed elements at stake and the associated vulnerability. Lava flow hazard assessment is at an advanced state, whereas comprehensive vulnerability assessment is lacking. Cataloguing and analyzing volcanic impacts provide insight on likely societal and physical vulnerabilities during future eruptions. Here we quantify the lava flow impact of two past main effusive eruptions of Etna volcano: the 1669, which is the biggest and destructive flank eruption to have occurred on Etna in historical time, and the 1981, lasting only 6 days, but characterized by an intense eruptive dynamics. Different elements at stake are considered, including population, hospitals, critical facilities, buildings of historic value, industrial infrastructures, gas and electricity networks, railways, roads, footways and finally land use. All these elements were combined with the 1669 and 1981 lava flow fields to quantify the social damage and economic loss.

  15. Adapting social impact assessment to address a project's human rights impacts and risks

    NARCIS (Netherlands)

    Esteves, Ana Maria; Factor, Gabriela; Vanclay, Frank; Gotzmann, Nora; Moreira, Sergio

    2017-01-01

    We address the weaknesses inherent in the social risk assessments undertaken for business, especially hi the extractive industries. In contrast to the conventional approach that considers consequence to the company rather than to impacted communities, conformance with the United Nations Guiding

  16. Population Dynamics and Air Pollution: The Impact of Demographics on Health Impact Assessment of Air Pollution

    Directory of Open Access Journals (Sweden)

    Esben Meulengracht Flachs

    2013-01-01

    Full Text Available Objective. To explore how three different assumptions on demographics affect the health impact of Danish emitted air pollution in Denmark from 2005 to 2030, with health impact modeled from 2005 to 2050. Methods. Modeled air pollution from Danish sources was used as exposure in a newly developed health impact assessment model, which models four major diseases and mortality causes in addition to all-cause mortality. The modeling was at the municipal level, which divides the approximately 5.5 M residents in Denmark into 99 municipalities. Three sets of demographic assumptions were used: (1 a static year 2005 population, (2 morbidity and mortality fixed at the year 2005 level, or (3 an expected development. Results. The health impact of air pollution was estimated at 672,000, 290,000, and 280,000 lost life years depending on demographic assumptions and the corresponding social costs at 430.4 M€, 317.5 M€, and 261.6 M€ through the modeled years 2005–2050. Conclusion. The modeled health impact of air pollution differed widely with the demographic assumptions, and thus demographics and assumptions on demographics played a key role in making health impact assessments on air pollution.

  17. Comparative Human Health Impact Assessment of Engineered Nanomaterials in the Framework of Life Cycle Assessment.

    Science.gov (United States)

    Fransman, Wouter; Buist, Harrie; Kuijpers, Eelco; Walser, Tobias; Meyer, David; Zondervan-van den Beuken, Esther; Westerhout, Joost; Klein Entink, Rinke H; Brouwer, Derk H

    2017-07-01

    For safe innovation, knowledge on potential human health impacts is essential. Ideally, these impacts are considered within a larger life-cycle-based context to support sustainable development of new applications and products. A methodological framework that accounts for human health impacts caused by inhalation of engineered nanomaterials (ENMs) in an indoor air environment has been previously developed. The objectives of this study are as follows: (i) evaluate the feasibility of applying the CF framework for NP exposure in the workplace based on currently available data; and (ii) supplement any resulting knowledge gaps with methods and data from the life cycle approach and human risk assessment (LICARA) project to develop a modified case-specific version of the framework that will enable near-term inclusion of NP human health impacts in life cycle assessment (LCA) using a case study involving nanoscale titanium dioxide (nanoTiO 2 ). The intent is to enhance typical LCA with elements of regulatory risk assessment, including its more detailed measure of uncertainty. The proof-of-principle demonstration of the framework highlighted the lack of available data for both the workplace emissions and human health effects of ENMs that is needed to calculate generalizable characterization factors using common human health impact assessment practices in LCA. The alternative approach of using intake fractions derived from workplace air concentration measurements and effect factors based on best-available toxicity data supported the current case-by-case approach for assessing the human health life cycle impacts of ENMs. Ultimately, the proposed framework and calculations demonstrate the potential utility of integrating elements of risk assessment with LCA for ENMs once the data are available. © 2016 Society for Risk Analysis.

  18. A comparative life cycle assessment of marine power systems

    International Nuclear Information System (INIS)

    Ling-Chin, Janie; Roskilly, Anthony P.

    2016-01-01

    Highlights: • Correlation among resources, emissions, key components and processes was attained. • Environmental benefits of innovative power systems were verified. • New-build system showed a great advantage over retrofit and conventional systems. • Relative contribution of significant components remained or became more profound. • Influence of fuel consumption quantity over the estimates varied with impact types. - Abstract: Despite growing interest in advanced marine power systems, knowledge gaps existed as it was uncertain which configuration would be more environmentally friendly. Using a conventional system as a reference, the comparative life cycle assessment (LCA) study aimed to compare and verify the environmental benefits of advanced marine power systems i.e. retrofit and new-build systems which incorporated emerging technologies. To estimate the environmental impact attributable to each system, a bottom-up integrated system approach was applied, i.e. LCA models were developed for individual components using GaBi, optimised operational profiles and input data standardised from various sources. The LCA models were assessed using CML2001, ILCD and Eco-Indicator99 methodologies. The estimates for the advanced systems were compared to those of the reference system. The inventory analysis results showed that both retrofit and new-build systems consumed less fuels (8.28% and 29.7% respectively) and released less emissions (5.2–16.6% and 29.7–55.5% respectively) during operation whilst more resources were consumed during manufacture, dismantling and the end of life. For 14 impact categories relevant to global warming, acidification, eutrophication, photochemical ozone creation and PM/respiratory inorganic health issues, reduction in LCIA results was achieved by retrofit (2.7–6.6%) and new-build systems (35.7–50.7%). The LCIA results of the retrofit system increased in ecotoxicity (1–8%), resource depletion (1–2%) and fossil fuel depletion

  19. Environmental impact assessment of pharmaceutical prescriptions: Does location matter?

    Science.gov (United States)

    Oldenkamp, Rik; Huijbregts, Mark A J; Hollander, Anne; Ragas, Ad M J

    2014-11-01

    A methodology was developed for the assessment and comparison of the environmental impact of two alternative pharmaceutical prescriptions. This methodology provides physicians with the opportunity to include environmental considerations in their choice of prescription. A case study with the two antibiotics ciprofloxacin and levofloxacin at three locations throughout Europe showed that the preference for a pharmaceutical might show spatial variation, i.e. comparison of two pharmaceuticals might yield different results when prescribed at different locations. This holds when the comparison is based on both the impact on the aquatic environment and the impact on human health. The relative impacts of ciprofloxacin and levofloxacin on human health were largely determined by the local handling of secondary sludge, agricultural disposal practices, the extent of secondary sewage treatment, and local food consumption patterns. The relative impacts of ciprofloxacin and levofloxacin on the aquatic environment were mostly explained by the presence of specific sewage treatment techniques, as effluents from sewage treatment plants (STPs) are the most relevant emission pathway for the aquatic environment. Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. Assessing the likely impacts of climate change on infrastructure

    International Nuclear Information System (INIS)

    Holper, Paul; Nolan, Michael

    2007-01-01

    Full text: In 2005, the Victorian Government contracted CSIRO, Maunsell Australia and Phillips Fox to undertake an overview assessment of the likely impacts of climate change on the State's infrastructure, establish the categories of infrastructure most at risk and outline opportunities for adaptation responses. The Government released the assessment in May 2007. Climate change poses a significant risk to infrastructure and its owners, managers and long-term operators. The work was undertaken on the basis that it should not be assumed that future climate and its impacts will simply be an extension of what has been experienced in the past. Major infrastructure items have long useful life spans (20-100 years). A bridge built today is expected to still be in use in tens, if not hundreds, of years. This means that recognition of likely climate change impacts and appropriate adaptation measures should occur now. Recognition of the risks associated with climate change is a valuable first step towards better planning of new infrastructure investments and reducing potential damage to existing infrastructure.lnfrastructure types examined were water, power, telecommunications, transport and buildings. The climate change projections used in this report are based on CSIRO climate modelling, supported by findings from the Intergovernmental Panel on Climate Change. Climatic and other variables considered were temperature, rainfall, available moisture, humidity, winds, fire-weather frequency and intensity, solar radiation levels and sea-level rise. For each climate change variable identified, we described a worst-case impact for low and high climate change projections for the years 2030 and 2070. The assessment was made on the basis of 'business as usual' with no adaptation responses to climate change. The report also details the current governance structures associated with each infrastructure type. Overall, the report assessed the likely impact of climate change on

  1. Overdiagnosis of ADHD in boys: Stereotype impact on neuropsychological assessment.

    Science.gov (United States)

    Fresson, Megan; Meulemans, Thierry; Dardenne, Benoit; Geurten, Marie

    2018-02-12

    There is vigorous debate regarding the possibility that ADHD is overdiagnosed in boys. We investigated the impact of the gender stereotype depicting boys as inattentive and impulsive on neuropsychological assessment (observation of psychology students and child's cognitive performance). In experiment 1, after the stereotype was activated, psychology students rated a "boy," a "girl," or a "child" on a behavioral assessment scale. In experiment 2, 103 children (boys and girls) completed neuropsychological tasks under stereotype threat or neutral conditions. The gender stereotype led psychology students to assess a child's behaviors more negatively if they thought the child was a boy. Boys' performance on one cognitive score declined following stereotype threat. Regression path analyses suggested moderation by stigma consciousness. Additionally, there were mediating and suppressing (through stereotype endorsement) effects. Our results suggest that the gender stereotype might contribute to the overdiagnosis of ADHD in boys.

  2. Health impact assessment of cycling network expansions in European cities.

    Science.gov (United States)

    Mueller, Natalie; Rojas-Rueda, David; Salmon, Maëlle; Martinez, David; Ambros, Albert; Brand, Christian; de Nazelle, Audrey; Dons, Evi; Gaupp-Berghausen, Mailin; Gerike, Regine; Götschi, Thomas; Iacorossi, Francesco; Int Panis, Luc; Kahlmeier, Sonja; Raser, Elisabeth; Nieuwenhuijsen, Mark

    2018-04-01

    We conducted a health impact assessment (HIA) of cycling network expansions in seven European cities. We modeled the association between cycling network length and cycling mode share and estimated health impacts of the expansion of cycling networks. First, we performed a non-linear least square regression to assess the relationship between cycling network length and cycling mode share for 167 European cities. Second, we conducted a quantitative HIA for the seven cities of different scenarios (S) assessing how an expansion of the cycling network [i.e. 10% (S1); 50% (S2); 100% (S3), and all-streets (S4)] would lead to an increase in cycling mode share and estimated mortality impacts thereof. We quantified mortality impacts for changes in physical activity, air pollution and traffic incidents. Third, we conducted a cost-benefit analysis. The cycling network length was associated with a cycling mode share of up to 24.7% in European cities. The all-streets scenario (S4) produced greatest benefits through increases in cycling for London with 1,210 premature deaths (95% CI: 447-1,972) avoidable annually, followed by Rome (433; 95% CI: 170-695), Barcelona (248; 95% CI: 86-410), Vienna (146; 95% CI: 40-252), Zurich (58; 95% CI: 16-100) and Antwerp (7; 95% CI: 3-11). The largest cost-benefit ratios were found for the 10% increase in cycling networks (S1). If all 167 European cities achieved a cycling mode share of 24.7% over 10,000 premature deaths could be avoided annually. In European cities, expansions of cycling networks were associated with increases in cycling and estimated to provide health and economic benefits. Copyright © 2018 Elsevier Inc. All rights reserved.

  3. The 6/94 gap in health impact assessment

    International Nuclear Information System (INIS)

    Erlanger, Tobias E.; Krieger, Gary R.; Singer, Burton H.; Utzinger, Juerg

    2008-01-01

    Health impact assessment (HIA), a methodology that aims to facilitate the mitigation of negative and enhancement of positive health effects due to projects, programmes and policies, has been developed over the past 20-30 years. There is an underlying assumption that HIA has become a full fledged critical piece of the impact assessment process with a stature equal to both environmental and social impact assessments. This assumption needs to be supported by evidence however. Within the context of projects in developing country settings, HIA is simply a slogan without a clearly articulated and relevant methodology, offered by academia and having little or no salience in the decision-making process regarding impacts. This harsh assertion is supported by posing a simple question: 'Where in the world have HIAs been carried out?' To answer this question, we systematically searched the peer-reviewed literature and online HIA-specific databases. We identified 237 HIA-related publications, but only 6% of these publications had a focus on the developing world. What emerges is, therefore, a huge disparity, which we coin the 6/94 gap in HIA, even worse than the widely known 10/90 gap in health research (10% of health research funding is utilized for diseases causing 90% of the global burden of disease). Implications of this 6/94 gap in HIA are discussed with pointed emphasis on extractive industries (oil/gas and mining) and water resources development. We conclude that there is a pressing need to institutionalize HIA in the developing world, as a consequence of current predictions of major extractive industry and water resources development, with China's investments in these sectors across Africa being particularly salient

  4. Methodology for qualitative uncertainty assessment of climate impact indicators

    Science.gov (United States)

    Otto, Juliane; Keup-Thiel, Elke; Rechid, Diana; Hänsler, Andreas; Pfeifer, Susanne; Roth, Ellinor; Jacob, Daniela

    2016-04-01

    The FP7 project "Climate Information Portal for Copernicus" (CLIPC) is developing an integrated platform of climate data services to provide a single point of access for authoritative scientific information on climate change and climate change impacts. In this project, the Climate Service Center Germany (GERICS) has been in charge of the development of a methodology on how to assess the uncertainties related to climate impact indicators. Existing climate data portals mainly treat the uncertainties in two ways: Either they provide generic guidance and/or express with statistical measures the quantifiable fraction of the uncertainty. However, none of the climate data portals give the users a qualitative guidance how confident they can be in the validity of the displayed data. The need for such guidance was identified in CLIPC user consultations. Therefore, we aim to provide an uncertainty assessment that provides the users with climate impact indicator-specific guidance on the degree to which they can trust the outcome. We will present an approach that provides information on the importance of different sources of uncertainties associated with a specific climate impact indicator and how these sources affect the overall 'degree of confidence' of this respective indicator. To meet users requirements in the effective communication of uncertainties, their feedback has been involved during the development process of the methodology. Assessing and visualising the quantitative component of uncertainty is part of the qualitative guidance. As visual analysis method, we apply the Climate Signal Maps (Pfeifer et al. 2015), which highlight only those areas with robust climate change signals. Here, robustness is defined as a combination of model agreement and the significance of the individual model projections. Reference Pfeifer, S., Bülow, K., Gobiet, A., Hänsler, A., Mudelsee, M., Otto, J., Rechid, D., Teichmann, C. and Jacob, D.: Robustness of Ensemble Climate Projections

  5. Environmental impact assessment of alfalfa (Medicago sativa L.) hay production.

    Science.gov (United States)

    Bacenetti, Jacopo; Lovarelli, Daniela; Tedesco, Doriana; Pretolani, Roberto; Ferrante, Valentina

    2018-09-01

    On-farm production of hay and high-protein-content feed has several advantages such as diversification of on-farm cultivated crops, reduction of off-farm feed concentrates transported over long distances and a reduction in runoff during the winter season if grown crops are perennial. Among those crops cultivated for high-protein-content feed, alfalfa (Medicago sativa L.) is one of the most important in the Italian context. Nevertheless, up to now, only a few studies have assessed the environmental performance of alfalfa hay production. In this study, using the Life Cycle Assessment approach, the environmental impact of alfalfa hay production in Northern Italy was analyzed. More in detail, two production practices (without and with irrigation) were compared. The results show that alfalfa hay production in irrigated fields has a better environmental performance compared to non-irrigated production, mainly because of the yield increase achieved with irrigation. In particular, for the Climate Change impact category, the impact is equal to 84.54 and 80.21kgCO 2 /t of hay for the scenario without and with irrigation, respectively. However, for two impact categories (Ozone Depletion and Human Toxicity-No Cancer Effect), the impact of irrigation completely offsets the yield increase, and the cultivation practice without irrigation shows the best environmental performance. For both scenarios, the mechanization of harvest is the main environmental hotspot, mostly due to fuel consumption and related combustion emissions. Wide differences were highlighted by comparing the two scenarios with the Ecoinvent process of alfalfa hay production; these differences are mostly due to the cultivation practice and, in particular, to the more intensive fertilization in Swiss production. Copyright © 2018 Elsevier B.V. All rights reserved.

  6. Assessing the performance of reinforced concrete structures under impact loads

    International Nuclear Information System (INIS)

    Sharma, Akanshu; Reddy, G.R.; Vaze, K.K.; Ozbolt, Josko; Hofmann, J.

    2011-01-01

    Reinforced concrete (RC) structures housing nuclear facilities must qualify against much stringent requirements of operating and accidental loads than conventional structures. One such accidental load that must be considered while assessing the performance of safety related RC structures is impact load. It is known that the behavior of concrete/reinforced concrete structures is strongly influenced by the loading rate. The RC structural members subjected to impact loads behave quite differently as compared to the same subjected to quasi-static loading due to the strain-rate influence on strength, stiffness, and ductility as well as to the activation of inertia forces. Moreover, for concrete structures, which exhibit damage and fracture phenomena, the failure mode and cracking pattern depend significantly on loading rate. In general, there is a tendency that with the increase of loading rate the failure mode changes from mode-I to mixed mode. In order to assess the performance of existing structures against impact loads that may be generated mainly due to man-made accidental conditions, it is important to have models that can realistically predict the impact behavior of concrete structures. The present paper focuses on a relatively new approach for 3D finite element analysis of RC structures under impact loads. The approach uses rate sensitive micro-plane model as constitutive law for concrete, while the strain-rate influence is captured by the activation energy. Inertia forces are implicitly accounted for through dynamic finite element analysis. It is shown with the help of different examples that the approach can very well simulate the behavior of RC structural elements under high rate loading. (author)

  7. Impact of teaching and assessment format on electrocardiogram interpretation skills.

    Science.gov (United States)

    Raupach, Tobias; Hanneforth, Nathalie; Anders, Sven; Pukrop, Tobias; Th J ten Cate, Olle; Harendza, Sigrid

    2010-07-01

    Interpretation of the electrocardiogram (ECG) is a core clinical skill that should be developed in undergraduate medical education. This study assessed whether small-group peer teaching is more effective than lectures in enhancing medical students' ECG interpretation skills. In addition, the impact of assessment format on study outcome was analysed. Two consecutive cohorts of Year 4 medical students (n=335) were randomised to receive either traditional ECG lectures or the same amount of small-group, near-peer teaching during a 6-week cardiorespiratory course. Before and after the course, written assessments of ECG interpretation skills were undertaken. Whereas this final assessment yielded a considerable amount of credit points for students in the first cohort, it was merely formative in nature for the second cohort. An unannounced retention test was applied 8 weeks after the end of the cardiovascular course. A significant advantage of near-peer teaching over lectures (effect size 0.33) was noted only in the second cohort, whereas, in the setting of a summative assessment, both teaching formats appeared to be equally effective. A summative instead of a formative assessment doubled the performance increase (Cohen's d 4.9 versus 2.4), mitigating any difference between teaching formats. Within the second cohort, the significant difference between the two teaching formats was maintained in the retention test (p=0.017). However, in both cohorts, a significant decrease in student performance was detected during the 8 weeks following the cardiovascular course. Assessment format appeared to be more powerful than choice of instructional method in enhancing student learning. The effect observed in the second cohort was masked by an overriding incentive generated by the summative assessment in the first cohort. This masking effect should be considered in studies assessing the effectiveness of different teaching methods.

  8. Consideration of climate change on environmental impact assessment in Spain

    Energy Technology Data Exchange (ETDEWEB)

    Enríquez-de-Salamanca, Álvaro, E-mail: aenriquez@draba.org [Escuela de Doctorado, Universidad Nacional de Educación a Distancia, UNED, Draba Ingeniería y Consultoría Medioambiental, Cañada Nueva, 29, 28200 San Lorenzo de El Escorial (Spain); Martín-Aranda, Rosa M., E-mail: rmartin@ccia.uned.es [Departamento de Química Inorgánica y Química Técnica, Facultad de Ciencias, Universidad Nacional de Educación a Distancia, UNED, Paseo Senda del Rey, 9, 28040, Madrid (Spain); Díaz-Sierra, Rubén, E-mail: sierra@dfmf.uned.es [Departamento de Física Matemática y de Fluidos, Facultad de Ciencias, Universidad Nacional de Educación a Distancia, UNED, Paseo Senda del Rey, 9, 28040, Madrid (Spain)

    2016-02-15

    Most of the projects subject to environmental impact assessment (EIA) are closely related to climate change, as they contribute to or are affected by it. The growing certainty about climate change and its impacts makes its consideration an essential part of the EIA process, as well as in strategic environmental assessment (SEA). This paper examines how climate change (CC) has been taken into account in EIA in Spain through the analysis of 1713 environmental records of decision (RODs) of projects submitted for EIA. In 2013 Spain approved one of the most advanced laws in terms of CC consideration in environmental assessment, although it had not yet accumulated extensive practice on the issue. This contrasts with the situation of countries like Canada or the USA, which have a significant body of experience without specific legal requirements. Only 14% of the RODs analysed included references to CC, and in more than half of the cases it was a mere citation. Thermal power plants, which are subject to specific GHG regulations, show the highest consideration, while transport infrastructures, which are important contributors to CC, show a very low consideration. Almost all the references are related to their contribution to CC, while consideration of the effects of CC is minimal. The increasingly common incorporation of CC into SEA, should not imply its exclusion from EIA, because both processes have different aims and uses. Including the obligation to consider CC in the EIA regulations is highly desirable, but probably not enough without other measures, such as practical guidance, training and motivational programmes for practitioners and evaluators. But even these actions cannot ensure effective and adequate assessments of CC. Probably more resources should be spent on creating greater awareness in all the agents involved in EIA. - Highlights: • We analyse how the climate change is considered in EIA in Spain. • Few projects seriously assess climate change.

  9. Consideration of climate change on environmental impact assessment in Spain

    International Nuclear Information System (INIS)

    Enríquez-de-Salamanca, Álvaro; Martín-Aranda, Rosa M.; Díaz-Sierra, Rubén

    2016-01-01

    Most of the projects subject to environmental impact assessment (EIA) are closely related to climate change, as they contribute to or are affected by it. The growing certainty about climate change and its impacts makes its consideration an essential part of the EIA process, as well as in strategic environmental assessment (SEA). This paper examines how climate change (CC) has been taken into account in EIA in Spain through the analysis of 1713 environmental records of decision (RODs) of projects submitted for EIA. In 2013 Spain approved one of the most advanced laws in terms of CC consideration in environmental assessment, although it had not yet accumulated extensive practice on the issue. This contrasts with the situation of countries like Canada or the USA, which have a significant body of experience without specific legal requirements. Only 14% of the RODs analysed included references to CC, and in more than half of the cases it was a mere citation. Thermal power plants, which are subject to specific GHG regulations, show the highest consideration, while transport infrastructures, which are important contributors to CC, show a very low consideration. Almost all the references are related to their contribution to CC, while consideration of the effects of CC is minimal. The increasingly common incorporation of CC into SEA, should not imply its exclusion from EIA, because both processes have different aims and uses. Including the obligation to consider CC in the EIA regulations is highly desirable, but probably not enough without other measures, such as practical guidance, training and motivational programmes for practitioners and evaluators. But even these actions cannot ensure effective and adequate assessments of CC. Probably more resources should be spent on creating greater awareness in all the agents involved in EIA. - Highlights: • We analyse how the climate change is considered in EIA in Spain. • Few projects seriously assess climate change.

  10. Data for the screening assessment. Volume 1: Text, Columbia River Comprehensive Impact Assessment

    International Nuclear Information System (INIS)

    Miley, T.B.; O'Neil, T.K.; Gilbert, R.O.; Klevgard, L.A.; Walters, T.B.

    1996-06-01

    The Columbia River is a critical resource for residents of the Pacific Northwest. This resource drew the Manhattan Project's planners to the site now called Hanford to produce nuclear weapon materials. Production of those materials has left behind a legacy of chemical and radioactive contamination and materials that have, are, and will continue to pose a threat to the Columbia river for the foreseeable future. To evaluate the impact to the river from this Hanford-derived contamination, the US Department of Energy, US Environmental Protection Agency, and State of Washington Department of Ecology (the Tri-Party agencies) initiated a study referred to as the Columbia River Comprehensive Impact Assessment (CRCIA). To address concerns about the scope and direction of CRCIA as well as enhance regulator, stakeholder, tribal, and public involvement, the CRCIA Management Team was formed in August 1995. A major CRCIA Team decision was to organize CRCIA into phases, with additional phases to be identified as warranted after completion of the initial phase. The initial phase is comprised of two parts: (1) a screening assessment to evaluate the current impact to the river resulting from Hanford-derived contamination and (2) identification of requirements considered necessary by the CRCIA Management Team for a comprehensive assessment of impact to the river. The purpose of the screening assessment is to support cleanup decisions. The scope of the screening assessment is to evaluate the current risk to humans and the environment resulting from Hanford-derived contaminants. The screening assessment has the primary components of: identifying contaminants to be assessed; identifying a variety of exposure scenarios to evaluate human contaminant exposure; identifying a variety of other species to evaluate ecological contaminant exposure; and assessing risks posed by exposure of humans and other species to the contaminants

  11. Data for the screening assessment. Volume 2: Appendices, Columbia River Comprehensive Impact Assessment

    International Nuclear Information System (INIS)

    Miley, T.B.; O'Neil, T.K.; Gilbert, R.O.; Klevgard, L.A.; Walters, T.B.

    1996-06-01

    The Columbia River is a critical resource for residents of the Pacific Northwest. This resource drew the Manhattan Project's planners to the site now called Hanford to produce nuclear weapon materials. Production of those materials has left behind a legacy of chemical and radioactive contamination and materials that have, are, and will continue to pose a threat to the Columbia river for the foreseeable future. To evaluate the impact to the river from this Hanford-derived contamination, the US Department of Energy, US Environmental Protection Agency, and State of Washington Department of Ecology (the Tri-Party agencies) initiated a study referred to as the Columbia River Comprehensive Impact Assessment (CRCIA). To address concerns about the scope and direction of CRCIA as well as enhance regulator, stakeholder, tribal, and public involvement, the CRCIA Management Team was formed in August 1995. A major CRCIA Team decision was to organize CRCIA into phases, with additional phases to be identified as warranted after completion of the initial phase. The initial phase is comprised of two parts: (1) a screening assessment to evaluate the current impact to the river resulting from Hanford-derived contamination and (2) identification of requirements considered necessary by the CRCIA Management Team for a comprehensive assessment of impact to the river. The purpose of the screening assessment is to support cleanup decisions. The scope of the screening assessment is to evaluate the current risk to humans and the environment resulting from Hanford-derived contaminants. The screening assessment has the primary components of: identifying contaminants to be assessed; identifying a variety of exposure scenarios to evaluate human contaminant exposure; identifying a variety of other species to evaluate ecological contaminant exposure; and assessing risks posed by exposure of humans and other species to the contaminants. This volume compiles the data from this study

  12. Nanotoxicity and Life Cycle Assessment: First attempt towards the determination of characterization factors for carbon nanotubes

    Science.gov (United States)

    Rodriguez-Garcia, Gonzalo; Zimmermann, Benedikt; Weil, Marcel

    2014-08-01

    Carbon materials, whether at macro, micro or at nanoscale, play an important role in the battery industry, as they can be used as electrodes, electrode enhancers, bipolar separators, or current collectors. When conducting a Life Cycle Assessment (LCA) of novel batteries manufacturing processes, we also need to consider the fate of potentially emitted carbon based nanomaterials. However, the knowledge generated in the last decade regarding the behavior of such materials in the environment and its toxicological effects has yet to be included in the Life Cycle Impact Assessment (LCIA) methodologies. Conventional databases of chemical products (e.g. ECHA, ECOTOX) offer little information regarding engineered nanomaterials (ENM). It is thus necessary to go one step further and compile physicochemical and toxicological data directly from scientific literature. Such studies do not only differ in their results, but also in their methodologies, and several calls have been made towards a more consistent approach that would allow us model the fate of ENM in the environment as well as their potentially harmful effects. Trying to overcome these limitations we have developed a tool based on Microsoft Excel® combining several methods for the estimation of physicochemical properties of carbon nanotubes (CNT). The information generated with this tool is combined with degradation rates and toxicological data consistent with the methods followed by the USEtox methodology. Thus, it is possible to calculate the characterization factors of CNTs and integrate them as a first proxy in future LCA of products including these ENM.

  13. Life Cycle Assessment of Flat Roof Technologies for Office Buildings in Israel

    Directory of Open Access Journals (Sweden)

    Svetlana Pushkar

    2016-01-01

    Full Text Available The goal of the current study was to evaluate the environmental damage from three flat roof technologies typically used in Israel: (i concrete, (ii ribbed slab with concrete blocks, and (iii ribbed slab with autoclaved aerated blocks. The roofs were evaluated using the Life Cycle Assessment (LCA methodology. The Production and Construction (P and C, Operational Energy (OE, and Maintenance to Demolition (MtoD stages were considered. The roofs were modeled based on an office building module located in the four climate zones of Israel, and the hierarchical ReCiPe2008 Life Cycle Impact Assessment (LCIA method was applied. The percent difference of one, which is the default methodological option of ReCiPe2008, and an ANOVA of the six methodological options of ReCiPe2008 were used. The results revealed that (i in a hot climate, the best roof technology can be selected by considering only the OE stage, whereas in a mild climate, both the OE and P and C stages must be considered; (ii in a hot climate, the best roof technology is a concrete roof, but in a mild climate, the best options are ribbed slab roofs with concrete blocks and autoclaved aerated blocks; and (iii the conjugation of ReCiPe2008 with a two-stage nested ANOVA is the appropriate approach to evaluate the differences in environmental damage in order to compare flat roof technologies.

  14. Nanotoxicity and Life Cycle Assessment: First attempt towards the determination of characterization factors for carbon nanotubes

    International Nuclear Information System (INIS)

    Rodriguez-Garcia, Gonzalo; Weil, Marcel; Zimmermann, Benedikt

    2014-01-01

    Carbon materials, whether at macro, micro or at nanoscale, play an important role in the battery industry, as they can be used as electrodes, electrode enhancers, bipolar separators, or current collectors. When conducting a Life Cycle Assessment (LCA) of novel batteries manufacturing processes, we also need to consider the fate of potentially emitted carbon based nanomaterials. However, the knowledge generated in the last decade regarding the behavior of such materials in the environment and its toxicological effects has yet to be included in the Life Cycle Impact Assessment (LCIA) methodologies. Conventional databases of chemical products (e.g. ECHA, ECOTOX) offer little information regarding engineered nanomaterials (ENM). It is thus necessary to go one step further and compile physicochemical and toxicological data directly from scientific literature. Such studies do not only differ in their results, but also in their methodologies, and several calls have been made towards a more consistent approach that would allow us model the fate of ENM in the environment as well as their potentially harmful effects. Trying to overcome these limitations we have developed a tool based on Microsoft Excel ® combining several methods for the estimation of physicochemical properties of carbon nanotubes (CNT). The information generated with this tool is combined with degradation rates and toxicological data consistent with the methods followed by the USEtox methodology. Thus, it is possible to calculate the characterization factors of CNTs and integrate them as a first proxy in future LCA of products including these ENM

  15. Planning Environmental Impact Assessment Orienting Sustainable Development:Opportunities and Challenges

    Institute of Scientific and Technical Information of China (English)

    Sun Yanjun; Chen Xingeng; Bao Yun; Peng Xiaochun; Gao Changbo

    2005-01-01

    Strategic Environmental Assessment is a frontier subject in the field of Environmental Impact Assessment. In the past two decades, especially in recent years, much more importance has been attached to Strategic Environmental Assessment. The Environmental Impact Assessment Law of the P.R.China which was promulgated provides a great opportunity for the development of Planning Environmental Impact Assessment and brings great challenges for the development of traditional Project Environmental Impact Assessment and Planning Environmental Impact Assessment at the same time.In order to promote the implementation of"The EIA Law", the inherent limitations of Project Environmental Impact Assessment must be identified sufficiendy and the theory research and practice of Planning Environmental Impact Assessment should be strengthened as well. Measures should be taken currendy to enforce the operation system. The authors wish to offer a few references to the progress and implementation of Planning Environmental Impact Assessment in China.

  16. [Health impact assessment of "white-collar exemption" in Japan].

    Science.gov (United States)

    Fujino, Yoshihisa; Matsuda, Shinya

    2007-03-01

    This work conducted a health impact assessment (HIA) of the Japanese Government's proposal concerning the introduction of so called "white-collar exemption" into the Japanese labor market. We adopted the Merseyside model and performed a rapid health impact assessment to assess the potential health effects of white-collar exemption. In this HIA, several health determinants which may possibly be affected, both positively and negatively, were identified based on experts' judgments. Literature evidence was assessed using PubMed and other databases. In addition, we searched for the opinions of those affected by white-collar exemption from internet web sites, and six concerns were identified. Long working hours were identified as the most serious concern by both experts and those affected. White-collar exemption may increase irregular working patterns which may be related to sleep disorder, stress, and cardiovascular disease. Family function and social participation will also be affected by irregular working patterns. On the other hand, in terms of stress, white-collar exemption may benefit from a higher degree of job control. There are possibilities that white-collar exemption may enable an improved work-life balance and enable access of some groups of the population, such as people with disabilities or parents looking after children, greater access to the labour market. However, it is uncertain whether the benefits of white-collar exemption would overcome those of the current free-time or flex-time systems. The present work provides a wide range of health impacts of white-collar exemption, and will hopefully attract the attentions of decision-makers and those likely to be affected in order to contribute to policy-making.

  17. Human scenarios for the screening assessment. Columbia River Comprehensive Impact Assessment

    International Nuclear Information System (INIS)

    Napier, B.A.; Harper, B.L.; Lane, N.K.; Strenge, D.L.; Spivey, R.B.

    1996-03-01

    Because of past nuclear production operations along the Columbia River, there is intense public and tribal interest in assessing any residual Hanford Site related contamination along the river from the Hanford Reach to the Pacific Ocean. The Columbia River Impact Assessment (CRCIA) was proposed to address these concerns. The assessment of the Columbia River is being conducted in phases. The initial phase is a screening assessment of risk, which addresses current environmental conditions for a range of potential uses. One component of the screening assessment estimates the risk from contaminants in the Columbia River to humans. Because humans affected by the Columbia river are involved in a wide range of activities, various scenarios have been developed on which to base the risk assessments. The scenarios illustrate the range of activities possible by members of the public coming in contact with the Columbia River so that the impact of contaminants in the river on human health can be assessed. Each scenario illustrates particular activity patterns by a specific group. Risk will be assessed at the screening level for each scenario. This report defines the scenarios and the exposure factors that will be the basis for estimating the potential range of risk to human health from Hanford-derived radioactive as well as non-radioactive contaminants associated with the Columbia River

  18. Human scenarios for the screening assessment. Columbia River Comprehensive Impact Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Napier, B.A.; Harper, B.L.; Lane, N.K.; Strenge, D.L.; Spivey, R.B.

    1996-03-01

    Because of past nuclear production operations along the Columbia River, there is intense public and tribal interest in assessing any residual Hanford Site related contamination along the river from the Hanford Reach to the Pacific Ocean. The Columbia River Impact Assessment (CRCIA) was proposed to address these concerns. The assessment of the Columbia River is being conducted in phases. The initial phase is a screening assessment of risk, which addresses current environmental conditions for a range of potential uses. One component of the screening assessment estimates the risk from contaminants in the Columbia River to humans. Because humans affected by the Columbia river are involved in a wide range of activities, various scenarios have been developed on which to base the risk assessments. The scenarios illustrate the range of activities possible by members of the public coming in contact with the Columbia River so that the impact of contaminants in the river on human health can be assessed. Each scenario illustrates particular activity patterns by a specific group. Risk will be assessed at the screening level for each scenario. This report defines the scenarios and the exposure factors that will be the basis for estimating the potential range of risk to human health from Hanford-derived radioactive as well as non-radioactive contaminants associated with the Columbia River.

  19. The Value of Mainstreaming Human Rights into Health Impact Assessment

    Science.gov (United States)

    MacNaughton, Gillian; Forman, Lisa

    2014-01-01

    Health impact assessment (HIA) is increasingly being used to predict the health and social impacts of domestic and global laws, policies and programs. In a comprehensive review of HIA practice in 2012, the authors indicated that, given the diverse range of HIA practice, there is an immediate need to reconsider the governing values and standards for HIA implementation [1]. This article responds to this call for governing values and standards for HIA. It proposes that international human rights standards be integrated into HIA to provide a universal value system backed up by international and domestic laws and mechanisms of accountability. The idea of mainstreaming human rights into HIA is illustrated with the example of impact assessments that have been carried out to predict the potential effects of intellectual property rights in international trade agreements on the availability and affordability of medicines. The article concludes by recommending international human rights standards as a legal and ethical framework for HIA that will enhance the universal values of nondiscrimination, participation, transparency and accountability and bring legitimacy and coherence to HIA practice as well. PMID:25264683

  20. A Computer Program for Assessing Nuclear Safety Culture Impact

    Energy Technology Data Exchange (ETDEWEB)

    Han, Kiyoon; Jae, Moosung [Hanyang Univ., Seoul (Korea, Republic of)

    2014-10-15

    Through several accidents of NPP including the Fukushima Daiichi in 2011 and Chernobyl accidents in 1986, a lack of safety culture was pointed out as one of the root cause of these accidents. Due to its latent influences on safety performance, safety culture has become an important issue in safety researches. Most of the researches describe how to evaluate the state of the safety culture of the organization. However, they did not include a possibility that the accident occurs due to the lack of safety culture. Because of that, a methodology for evaluating the impact of the safety culture on NPP's safety is required. In this study, the methodology for assessing safety culture impact is suggested and a computer program is developed for its application. SCII model which is the new methodology for assessing safety culture impact quantitatively by using PSA model. The computer program is developed for its application. This program visualizes the SCIs and the SCIIs. It might contribute to comparing the level of the safety culture among NPPs as well as improving the management safety of NPP.

  1. Risk and environmental impact assessment: nuclear and environmental licensing interface

    International Nuclear Information System (INIS)

    Costa, Eduardo M.; Monteiro, Iara A.

    1997-01-01

    The main aims of this paper are the identification and discussion of interfaces and application of common concepts in the existing nuclear and environmental licensing procedures. Risk and impact assessment of nuclear electricity generation are two of these concepts which are discussed detail. The risk concept, which had initially focused on engineering projects, has been extended to many other areas of human activity. Risk resulting from the use of ionization radiation has been associated to the dose for the critical members of the public. Therefore, radiation protection applies basic dose limits which are established in national and international recommendations. These recommendations are increasing the emphasis to keep all the exposures to ionizing radiation as low as reasonable achievable, economical and social factors being taken into account. On the other hand, environmental impact assessment has been used as a tool in planning and decision-making processes, thus including environmental concern in the discussion of social and economical development strategies. This paper aims to discuss the association of these two concepts by presenting the procedures of control of radiological impact during normal operation of a nuclear power plant and the various forms of risk communication to the public in the case of events occurrence. (author). 13 refs

  2. Balance in scientific impact assessment: the EGU Awards Committe experience

    Science.gov (United States)

    Montanari, Alberto

    2016-04-01

    Evaluation of scientific impact is becoming an essential step all over the world for assigning academic positions, funding and recognition. Impact is generally assessed by means of objective bibliometric indicators which are frequently integrated with a subjective evaluation by one or more individuals. An essential requirement of impact assessment is to ensure balance across several potential discriminating factors, including gender, ethnics, culture, scientific field and many others. Scientific associations need to ensure balance in any step of their activity and in particular when electing their representatives, evaluating scientific contributions, reviewing papers and assigning awards. While ensuring balance is a strict necessity, how to get to target is still a matter of vivid debates. In fact, the context of science is very different with respect to the general context of society and the need for scientific associations to maintain confidentiality in their evaluation procedures makes the application of transparent procedures more complicated. This talk aims to present the experience and the efforts of the European Geosciences Union to ensure balance, with a particular focus on gender balance. Data and statistics will be presented in the attempt to provide constructive indications to get to the target of giving equal opportunities to researchers across gender, continents and ethnic groups. Science is a unifying discipline and balance will be vital to ensure that humans and our planet co-evolve sustainably.

  3. Characterisation factors for life cycle impact assessment of sound emissions.

    Science.gov (United States)

    Cucurachi, S; Heijungs, R

    2014-01-15

    Noise is a serious stressor affecting the health of millions of citizens. It has been suggested that disturbance by noise is responsible for a substantial part of the damage to human health. However, no recommended approach to address noise impacts was proposed by the handbook for life cycle assessment (LCA) of the European Commission, nor are characterisation factors (CFs) and appropriate inventory data available in commonly used databases. This contribution provides CFs to allow for the quantification of noise impacts on human health in the LCA framework. Noise propagation standards and international reports on acoustics and noise impacts were used to define the model parameters. Spatial data was used to calculate spatially-defined CFs in the form of 10-by-10-km maps. The results of this analysis were combined with data from the literature to select input data for representative archetypal situations of emission (e.g. urban day with a frequency of 63 Hz, rural night at 8000 Hz, etc.). A total of 32 spatial and 216 archetypal CFs were produced to evaluate noise impacts at a European level (i.e. EU27). The possibility of a user-defined characterisation factor was added to support the possibility of portraying the situation of full availability of information, as well as a highly-localised impact analysis. A Monte Carlo-based quantitative global sensitivity analysis method was applied to evaluate the importance of the input factors in determining the variance of the output. The factors produced are ready to be implemented in the available LCA databases and software. The spatial approach and archetypal approach may be combined and selected according to the amount of information available and the life cycle under study. The framework proposed and used for calculations is flexible enough to be expanded to account for impacts on target subjects other than humans and to continents other than Europe. © 2013 Elsevier B.V. All rights reserved.

  4. Environmental impact assessment of coal power plants in operation

    Directory of Open Access Journals (Sweden)

    Bartan Ayfer

    2017-01-01

    Full Text Available Coal power plants constitute an important component of the energy mix in many countries. However, coal power plants can cause several environmental risks such as: climate change and biodiversity loss. In this study, a tool has been proposed to calculate the environmental impact of a coal-fired thermal power plant in operation by using multi-criteria scoring and fuzzy logic method. We take into account the following environmental parameters in our tool: CO, SO2, NOx, particulate matter, fly ash, bottom ash, the cooling water intake impact on aquatic biota, and the thermal pollution. In the proposed tool, the boundaries of the fuzzy logic membership functions were established taking into account the threshold values of the environmental parameters which were defined in the environmental legislation. Scoring of these environmental parameters were done with the statistical analysis of the environmental monitoring data of the power plant and by using the documented evidences that were obtained during the site visits. The proposed method estimates each environmental impact factor level separately and then aggregates them by calculating the Environmental Impact Score (EIS. The proposed method uses environmental monitoring data and documented evidence instead of using simulation models. The proposed method has been applied to the 4 coal-fired power plants that have been operation in Turkey. The Environmental Impact Score was obtained for each power plant and their environmental performances were compared. It is expected that those environmental impact assessments will contribute to the decision-making process for environmental investments to those plants. The main advantage of the proposed method is its flexibility and ease of use.

  5. Environmental impact assessment of coal power plants in operation

    Science.gov (United States)

    Bartan, Ayfer; Kucukali, Serhat; Ar, Irfan

    2017-11-01

    Coal power plants constitute an important component of the energy mix in many countries. However, coal power plants can cause several environmental risks such as: climate change and biodiversity loss. In this study, a tool has been proposed to calculate the environmental impact of a coal-fired thermal power plant in operation by using multi-criteria scoring and fuzzy logic method. We take into account the following environmental parameters in our tool: CO, SO2, NOx, particulate matter, fly ash, bottom ash, the cooling water intake impact on aquatic biota, and the thermal pollution. In the proposed tool, the boundaries of the fuzzy logic membership functions were established taking into account the threshold values of the environmental parameters which were defined in the environmental legislation. Scoring of these environmental parameters were done with the statistical analysis of the environmental monitoring data of the power plant and by using the documented evidences that were obtained during the site visits. The proposed method estimates each environmental impact factor level separately and then aggregates them by calculating the Environmental Impact Score (EIS). The proposed method uses environmental monitoring data and documented evidence instead of using simulation models. The proposed method has been applied to the 4 coal-fired power plants that have been operation in Turkey. The Environmental Impact Score was obtained for each power plant and their environmental performances were compared. It is expected that those environmental impact assessments will contribute to the decision-making process for environmental investments to those plants. The main advantage of the proposed method is its flexibility and ease of use.

  6. Environmental impacts of a lignocellulose feedstock biorefinery system: An assessment

    International Nuclear Information System (INIS)

    Uihlein, Andreas; Schebek, Liselotte

    2009-01-01

    Biomass is a sustainable alternative to fossil energy carriers which are used to produce fuels, electricity, chemicals, and other goods. At the moment, the main biobased products are obtained by the conversion of biomass to basic products like starch, oil, and cellulose. In addition, some single chemicals and fuels are produced. Presently, concepts of biorefineries which will produce a multitude of biomass-derived products are discussed. Biorefineries are supposed to contribute to a more sustainable resource supply and to a reduction in greenhouse gas emissions. However, biobased products and fuels may also be associated with environmental disadvantages due to, e.g. land use or eutrophication of water. We performed a Life Cycle Assessment of a lignocellulose feedstock biorefinery system and compared it to conventional product alternatives. The biorefinery was found to have the greatest environmental impacts in the three categories: fossil fuel use, respiratory effects, and carcinogenics. The environmental impacts predominantly result from the provision of hydrochloric acid and to a smaller extent also from the provision of process heat. As the final configuration of the biorefinery cannot be determined yet, various variants of the biorefinery system were analysed. The optimum variant (acid and heat recoveries) yields better results than the fossil alternatives, with the total environmental impacts being approx. 41% lower than those of the fossil counterparts. For most biorefinery variants analysed, the environmental performance in some impact categories is better than that of the fossil counterparts while disadvantages can be seen in other categories.

  7. Improved cook stove adoption and impact assessment: A proposed methodology

    International Nuclear Information System (INIS)

    Troncoso, Karin; Armendáriz, Cynthia; Alatorre, Silvia

    2013-01-01

    Aims: Until now, the success of improved cook stoves (ICS) implementation programs has usually been measured by the number of ICS distributed. Some important research has been conducted to try to determine the effects of the use of an ICS in the user′s health, but these studies are expensive and time consuming. Moreover, no evaluations show the impact of the technology in the user′s lives. This study seeks to contribute to fill this gap. Scope: By applying cluster analysis techniques to survey data, the most relevant variables that explain adoption and impact were identified. Using these variables, two qualitative indexes are proposed: The adoption index considers the use of the new technology, the level of satisfaction, and the conditions of the stove. The impact index considers the changes in cooking practices and life quality brought about by the ICS. Both indexes are then applied to two implementation programs. The indexes show the differences between the program results and the user′s perceptions of each technology. Conclusions: The proposed indexes can be used to measure the success of an ICS implementation program in terms of the benefits perceived by the users of these technologies. -- Highlights: •Two qualitative indexes are proposed to measure the benefits perceived by ICS users. •Two implementation programs were assessed. •The approach enables determining the impact of ICS programs at a fraction of the cost. •It enables comparing the results of different implementation programs

  8. Economic Impact Assessment of Alternative Climate Policy Strategies

    International Nuclear Information System (INIS)

    Kemfert, C.

    2001-10-01

    This paper investigates the world economic implications of climate change policy strategies, especially the evaluation of impacts by an implementation of Clean Development Mechanisms, Joint Implementation and Emissions trading with a world integrated assessment model. Of special interest in this context are the welfare spill over and competitiveness effects that result from diverse climate policy strategies. In particular, this study elaborates and compares multi gas policy strategies and explores the impacts of the inclusion of sinks. Because of the recent decision of an isolated climate policy strategy by the United States of America, we examine the economic impacts of all world regions by a non cooperative and free rider position of the USA. It turns out that Clean Development Mechanisms and Joint Implementation show evidence of improvement in the economic development in the host countries and increase the share of new applied technologies. The decomposition of welfare effects demonstrates that the competitiveness effect including the spill over effects from trade have the strongest importance because of the intense trade relations between countries. Climatic effects have a significant impact within the next 50 years, cause considerable welfare losses to world regions and will intensify if some highly responsible nations like the USA do not reduce their emissions

  9. Life-Cycle environmental impact assessment of mineral industries

    Science.gov (United States)

    Hisan Farjana, Shahjadi; Huda, Nazmul; Parvez Mahmud, M. A.

    2018-05-01

    Mining is the extraction and processing of valuable ferro and non-ferro metals and minerals to be further used in manufacturing industries. Valuable metals and minerals are extracted from the geological deposits and ores deep in the surface through complex manufacturing technologies. The extraction and processing of mining industries involve particle emission to air or water, toxicity to the environment, contamination of water resources, ozone layer depletion and most importantly decay of human health. Despite all these negative impacts towards sustainability, mining industries are working throughout the world to facilitate the employment sector, economy and technological growth. The five most important miners in the world are South Africa, Russia, Australia, Ukraine, Guinea. The mining industries contributes to their GDP significantly. However, the most important issue is making the mining world sustainable thus reducing the emissions. To address the environmental impacts caused by the mining sectors, this paper is going to analyse the environmental impacts caused by the 5 major minerals extraction processes, which are bauxite, ilmenite, iron ore, rutile and uranium by using the life-cycle impact assessment technologies. The analysis is done here using SimaPro software version 8.4 using ReCipe, CML and Australian indicator method.

  10. Environmental impact assessment in Moa-Holguín Port

    Directory of Open Access Journals (Sweden)

    Rosa María Pérez Silva

    2015-07-01

    Full Text Available The operations of unloading ships the reception and distribution of products derivate of oil crude in the storage area, the movement of raw materials like coal anthracite, ammonia and sulphur, the load of lots of minerals as well as the maintenance of ships, direct leads to the appearance of hydrocarbons that affects the different ecosystems which he meets in once the contaminating source in the municipal Moa. It is present the characterization of ecosystems affected with oil's hydrocarbons, attending to environmental impacts identified by the expert group and the prior characterization of the area using assessment tools expert judgment using Delphi methodology. The environmental impact study was realized of qualitative form through matrix of cause-effect, valuation and importance of impact. The environmental factors of resulting surface/groundwater and health and hygiene the most attacked while impacts were more aggressive emissions (throwing to the ground hydrocarbons/ liberation to the midway air of gases, noises and materials in particles, throwing and contamination of the source for dragging of sediments, hydrocarbons and chemical substances and accumulation waste (creation of drains industrials.

  11. Health Impact Assessment Practice and Potential for Integration within Environmental Impact and Strategic Environmental Assessments in Italy

    Science.gov (United States)

    Linzalone, Nunzia; Assennato, Giorgio; Ballarini, Adele; Cadum, Ennio; Cirillo, Mario; Cori, Liliana; De Maio, Francesca; Musmeci, Loredana; Natali, Marinella; Rieti, Sabrina; Soggiu, Maria Eleonora; Bianchi, Fabrizio

    2014-01-01

    Avoiding or minimizing potential environmental impact is the driving idea behind protecting a population’s health via Environmental Impact Assessments (EIAs) and Strategic Environmental Assessments (SEAs). However, both are often carried out without any systematic approach. This paper describes the findings of a review of HIA, EIA and SEA experiences carried out by the authors, who act as institutional competent subjects at the national and regional levels in Italy. The analysis of how health is tackled in EIA and SEA procedures could support the definition of a protocol for the integration of HIA with EIA and SEA. Although EIA and SEA approaches include the aim of protecting health, significant technical and methodological gaps are present when assessing health systematically, and their basic principles regarding assessment are unsatisfactory for promoting and addressing healthcare concepts stated by the WHO. HIA is still poorly integrated into the decision-making process, screening and monitoring phases are only occasionally implemented, and operational details are not well-defined. The collaborative approach of institutions involved in environment and health is a core element in a systematic advancement toward supporting effective decisions and effective protection of the environment and health. At the Italian national level, the definition of guidelines and tools for HIA, also in relation with EIA and SEA, is of great interest. PMID:25493391

  12. Assessment of chemical emissions in life cycle impact assessment - focus on low substance data availability and

    DEFF Research Database (Denmark)

    Larsen, Henrik Fred

    2004-01-01

    impact approaches, i.e. the assessment factor-based PNEC approach and the PAF-based approach, shows pros and cons for both. However, taking the comparative nature of LCA and its aim for best estimate into account, and combining this with the possibilities for reducing the data demand of an EC50-based PAF......Life cycle assessment (LCA) studies on products or services seem generally to be carried out without a proper inclusion of potential toxic impacts from emissions of chemicals. The first goal of the thesis is to investigate this statement and to clarify whether or not the outcome of an LCA can...... of substance data on known emissions. To be able to characterize the potential toxic impacts on humans and the environment of chemical emissions, substance data on fate and effect are needed. The second goal of this thesis is to investigate how to deal with low substance data availability on especially effect...

  13. Impact Assessment and Environmental Evaluation of Various Ammonia Production Processes

    Science.gov (United States)

    Bicer, Yusuf; Dincer, Ibrahim; Vezina, Greg; Raso, Frank

    2017-05-01

    In the current study, conventional resources-based ammonia generation routes are comparatively studied through a comprehensive life cycle assessment. The selected ammonia generation options range from mostly used steam methane reforming to partial oxidation of heavy oil. The chosen ammonia synthesis process is the most common commercially available Haber-Bosch process. The essential energy input for the methods are used from various conventional resources such as coal, nuclear, natural gas and heavy oil. Using the life cycle assessment methodology, the environmental impacts of selected methods are identified and quantified from cradle to gate. The life cycle assessment outcomes of the conventional resources based ammonia production routes show that nuclear electrolysis-based ammonia generation method yields the lowest global warming and climate change impacts while the coal-based electrolysis options bring higher environmental problems. The calculated greenhouse gas emission from nuclear-based electrolysis is 0.48 kg CO2 equivalent while it is 13.6 kg CO2 per kg of ammonia for coal-based electrolysis method.

  14. Social impact assessments: Developing a consolidated conceptual framework

    Energy Technology Data Exchange (ETDEWEB)

    Arce-Gomez, Antonio, E-mail: aarcegomez@swin.edu.au; Donovan, Jerome D., E-mail: jdonovan@swin.edu.au; Bedggood, Rowan E., E-mail: rbedggood@swin.edu.au

    2015-01-15

    Social Impact Assessments (SIAs) have played an increasingly important role in the conduct of planned interventions, providing proponents the capacity to assess and manage the social consequences of their activities. Whilst the SIA field has experienced significant conceptual and practical development over the last decade, efforts at consolidating this within one framework have been limited. In this paper, we incorporate this new knowledge by redeveloping and thus updating the SIA procedural framework developed by Interorganizational Committee on Guidelines and Principles for Social Impact Assessment. In doing so, this updated procedural framework has attempted to incorporate current ‘best practice’ that focuses on participatory approaches to undertaking an SIA. This involved making adaptions to two steps, expansions to five steps, integration of a stronger participatory approach to six steps, and the development of a new step, Management and Evaluation reflecting moves towards ex-post use of SIA processes. It is hoped that this consolidation of the literature of a decade's worth of key findings in SIA research will lead to further efforts towards a meta-evaluation of SIA literature and a platform from which newer developments may be further investigated.

  15. Impact Assessment and Environmental Evaluation of Various Ammonia Production Processes.

    Science.gov (United States)

    Bicer, Yusuf; Dincer, Ibrahim; Vezina, Greg; Raso, Frank

    2017-05-01

    In the current study, conventional resources-based ammonia generation routes are comparatively studied through a comprehensive life cycle assessment. The selected ammonia generation options range from mostly used steam methane reforming to partial oxidation of heavy oil. The chosen ammonia synthesis process is the most common commercially available Haber-Bosch process. The essential energy input for the methods are used from various conventional resources such as coal, nuclear, natural gas and heavy oil. Using the life cycle assessment methodology, the environmental impacts of selected methods are identified and quantified from cradle to gate. The life cycle assessment outcomes of the conventional resources based ammonia production routes show that nuclear electrolysis-based ammonia generation method yields the lowest global warming and climate change impacts while the coal-based electrolysis options bring higher environmental problems. The calculated greenhouse gas emission from nuclear-based electrolysis is 0.48 kg CO 2 equivalent while it is 13.6 kg CO 2 per kg of ammonia for coal-based electrolysis method.

  16. Vulnerability assessment of atmospheric environment driven by human impacts.

    Science.gov (United States)

    Zhang, Yang; Shen, Jing; Ding, Feng; Li, Yu; He, Li

    2016-11-15

    Atmospheric environment quality worsening is a substantial threat to public health worldwide, and in many places, air pollution due to the intensification of the human activity is increasing dramatically. However, no studies have been investigated the integration of vulnerability assessment and atmospheric environment driven by human impacts. The objective of this study was to identify and prioritize the undesirable environmental changes as an early warning system for environment managers and decision makers in term of human, atmospheric environment, and social economic elements. We conduct a vulnerability assessment method of atmospheric environment associated with human impact, this method integrates spatial context of Geographic Information System (GIS) tool, multi-criteria decision analysis (MCDA) method, ordered weighted averaging (OWA) operators under the Exposure-Sensitivity- Adaptive Capacity (ESA) framework. Decision makers can find out relevant vulnerability assessment results with different vulnerable attitudes. In the Beijing-Tianjin-Hebei (BTH) region, China, we further applied this developed method and proved it to be reliable and consistent with the China Environmental Status Bulletin. Results indicate that the vulnerability of atmospheric environment in the BTH region is not optimistic, and environment managers should do more about air pollution. Thus, the most appropriate strategic decision and development program of city or state can be picked out assisting by the vulnerable results. Copyright © 2016 Elsevier B.V. All rights reserved.

  17. The development of ecological impact assessment in China.

    Science.gov (United States)

    Liu, Xuehua; Li, Zhouyuan; Liao, Chenghao; Wang, Qing; Zhu, Annah; Li, Dong; Li, Yajun; Tang, Zhuo

    2015-12-01

    The balance between economic development and ecological conservation in China has become a critical issue in recent decades. Ecological impact assessment (EcoIA) was established beginning in the 1980s as a component of environmental impact assessment (EIA) that focuses specifically on human-related changes in ecosystem structure and function. EcoIA has since been widely applied throughout the country with continuous refinements in theory and practice. As compared to EIA, EcoIA is often performed at a larger scale in the long-term, and thus requires more advanced tools and techniques to quantify and assess. This paper reviews the development of EcoIA over the past 30years in China, with specific consideration given to refinements in legislation and methodology. Three stages in the development of EcoIA in China are identified, along with their achievements and limitations. Supplementing this qualitative analysis, the paper also provides a quantitative bibliometrics review of academic publications concerning EcoIA in China over the three identified stages. Lastly, general trends in the development of EcoIA are summarized with the aim of conveying potential future trajectories. This review is intended to introduce the EcoIA system to scholars interested in the growing field of environmental management in China. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Social impact assessments: Developing a consolidated conceptual framework

    International Nuclear Information System (INIS)

    Arce-Gomez, Antonio; Donovan, Jerome D.; Bedggood, Rowan E.

    2015-01-01

    Social Impact Assessments (SIAs) have played an increasingly important role in the conduct of planned interventions, providing proponents the capacity to assess and manage the social consequences of their activities. Whilst the SIA field has experienced significant conceptual and practical development over the last decade, efforts at consolidating this within one framework have been limited. In this paper, we incorporate this new knowledge by redeveloping and thus updating the SIA procedural framework developed by Interorganizational Committee on Guidelines and Principles for Social Impact Assessment. In doing so, this updated procedural framework has attempted to incorporate current ‘best practice’ that focuses on participatory approaches to undertaking an SIA. This involved making adaptions to two steps, expansions to five steps, integration of a stronger participatory approach to six steps, and the development of a new step, Management and Evaluation reflecting moves towards ex-post use of SIA processes. It is hoped that this consolidation of the literature of a decade's worth of key findings in SIA research will lead to further efforts towards a meta-evaluation of SIA literature and a platform from which newer developments may be further investigated

  19. ASSESSING THE IMPACT OF CORRUPTION UPON THE ROMANIAN ECONOMY

    Directory of Open Access Journals (Sweden)

    Sorin-Daniel, MANOLE

    2014-07-01

    Full Text Available Abstract: This paper is dedicated to estimating the influence of corruption upon Romania’s economic growth by means of an econometric model ARMA component. In order to quantify the impact, firstly some indicators have been identified to properly assess the economic condition and corruption. The most important economic growth indicator is real GDP growth rate (or chain index of real GDP. In order to estimate the level of corruption, the authors have used the Corruption Perceptions Index, annually launched and calculated by Transparency International. The model chosen for this paper has an ARMA component and expresses the dependence of the economic variable on the corruption variable by a straight-line relationship. The model shows that one of the factors having a significant negative impact upon the economic growth is corruption.

  20. Methodology for assessing the impacts of distributed generation interconnection

    Directory of Open Access Journals (Sweden)

    Luis E. Luna

    2011-06-01

    Full Text Available This paper proposes a methodology for identifying and assessing the impact of distributed generation interconnection on distribution systems using Monte Carlo techniques. This methodology consists of two analysis schemes: a technical analysis, which evaluates the reliability conditions of the distribution system; on the other hand, an economic analysis that evaluates the financial impacts on the electric utility and its customers, according to the system reliability level. The proposed methodology was applied to an IEEE test distribution system, considering different operation schemes for the distributed generation interconnection. The application of each one of these schemes provided significant improvements regarding the reliability and important economic benefits for the electric utility. However, such schemes resulted in negative profitability levels for certain customers, therefore, regulatory measures and bilateral contracts were proposed which would provide a solution for this kind of problem.

  1. Indexes of leading climate indicators for impact assessment

    International Nuclear Information System (INIS)

    Easterling, W.E.; Kates, R.W.

    1995-01-01

    Could users of climate information for impact assessment be overlooking an important source of information in climate indicators? We argue that indexes of leading climate indicators of impacts may be usable knowledge for consumers and may provide guidance to the global climate observing community concerning the types of data and information that users need. Five classes of indexes are suggested: Climate Extremes Index (CEI) and Greenhouse Climate Response Index (GCRI) - such are already available from scientists at the US National Climatic Data Center - plus proposed indexes of Hazard Warning, Ecosystem Health, and Energy Demand and Renewable Natural Resources. We conclude that the CEI and GCRI posses several necessary attributes to become usable knowledge; the other indexes have the potential to become usable knowledge, but remain to be implemented with climate data and fully evaluated. 34 refs

  2. The role of stand history in assessing forest impacts

    Science.gov (United States)

    Dale, V.H.; Doyle, T.W.

    1987-01-01

    Air pollution, harvesting practices, and natural disturbances can affect the growth of trees and forest development. To make predictions about anthropogenic impacts on forests, we need to understand how these factors affect tree growth. In this study the effect of disturbance history on tree growth and stand structure was examined by using a computer model of forest development. The model was run under the climatic conditions of east Tennessee, USA, and the results compared to stand structure and tree growth data from a yellow poplar-white oak forest. Basal area growth and forest biomass were more accurately projected when rough approximations of the thinning and fire history typical of the measured plots were included in the simulation model. Stand history can influence tree growth rates and forest structure and should be included in any attempt to assess forest impacts.

  3. Assessment of the Health Impacts of Climate Change in Kiribati

    Science.gov (United States)

    McIver, Lachlan; Woodward, Alistair; Davies, Seren; Tibwe, Tebikau; Iddings, Steven

    2014-01-01

    Kiribati—a low-lying, resource-poor Pacific atoll nation—is one of the most vulnerable countries in the World to the impacts of climate change, including the likely detrimental effects on human health. We describe the preparation of a climate change and health adaptation plan for Kiribati carried out by the World Health Organization and the Kiribati Ministry of Health and Medical Services, including an assessment of risks to health, sources of vulnerability and suggestions for highest priority adaptation responses. This paper identifies advantages and disadvantages in the process that was followed, lays out a future direction of climate change and health adaptation work in Kiribati, and proposes lessons that may be applicable to other small, developing island nations as they prepare for and adapt to the impacts of climate change on health. PMID:24830452

  4. Radiological impact assessment of arc welding supplies rutile

    International Nuclear Information System (INIS)

    Rozas Guinea, S.; Herranz Soler, M.; Perez Marin, C.; Idoeta Hermandorena, R.; Alegria gutierrez, N.; Nunez-Lagos Rogla, R.; Legarda Ibanez, F.

    2013-01-01

    Consumables for welding containing rutile, the coating of the electrode or the filling of tubular thread, are the most widely used and also the most radioactive since the rutile is a mineral containing traces of natural radionuclides, and is therefore considered Normal Occurring Radioactive Material (NORM). As these electrodes and wire are consumed, small particles, aerosols and gases are emitted to the atmosphere of work, and may be inhaled by the welder. Therefore, and also according to the current regulatory framework and work carried out previously by the author on the radiological impact of the process of manufacture and storage of coated rutile electrodes, the objectives are: 1Calcular the internal dose for inhalation during two types of welding, one with electrodes coated and the other with thread. 2 calculate the external dose due to the deposition of particles in the work environment, slag and the immersion of the soldering iron in the cloud of smoke. 3 to assess the radiological impact. (Author)

  5. Deciding over nature: Corruption and environmental impact assessments

    International Nuclear Information System (INIS)

    Williams, Aled; Dupuy, Kendra

    2017-01-01

    Environmental Impact Assessments (EIAs) are an important analytic tool for identifying and potentially mitigating project risks and negative environmental and societal impacts. Their usefulness, however, depends on how they are implemented and on whether findings are used in public decision-making. Given the notorious vulnerability of public-private interactions to corrupt practices, we examine potential and actual corruption risks across four stages of a generic EIA process. Combined with case analysis of the EIA process in Albania, a Southeastern European context experiencing serious governance challenges, we reflect on the vulnerabilities of EIAs to various forms of corruption from a principal-agent perspective. We concur with earlier research suggesting that the fundamentally rationalist approach behind EIAs do not necessarily match the empirical realities of public environmental decision-making, particularly in less mature EIA systems. We conclude with suggestions for framing a future research agenda in this area and touch on tentative policy remedies.

  6. Climate change impacts in Iran: assessing our current knowledge

    Science.gov (United States)

    Rahimi, Jaber; Malekian, Arash; Khalili, Ali

    2018-02-01

    During recent years, various studies have focused on investigating the direct and indirect impacts of climate changes in Iran while the noteworthy fact is the achievement gained by these researches. Furthermore, what should be taken into consideration is whether these studies have been able to provide appropriate opportunities for improving further studies in this particular field or not. To address these questions, this study systematically reviewed and summarized the current available literature (n = 150) regarding the impacts of climate change on temperature and precipitation in Iran to assess our current state of knowledge. The results revealed that while all studies discuss the probable changes in temperature and precipitation over the next decades, serious contradictions could be seen in their results; also, the general pattern of changes was different in most of the cases. This matter may have a significant effect on public beliefs in climate change, which can be a serious warning for the activists in this realm.

  7. Towards a meaningful assessment of marine ecological impacts in life cycle assessment (LCA).

    Science.gov (United States)

    Woods, John S; Veltman, Karin; Huijbregts, Mark A J; Verones, Francesca; Hertwich, Edgar G

    2016-01-01

    Human demands on marine resources and space are currently unprecedented and concerns are rising over observed declines in marine biodiversity. A quantitative understanding of the impact of industrial activities on the marine environment is thus essential. Life cycle assessment (LCA) is a widely applied method for quantifying the environmental impact of products and processes. LCA was originally developed to assess the impacts of land-based industries on mainly terrestrial and freshwater ecosystems. As such, impact indicators for major drivers of marine biodiversity loss are currently lacking. We review quantitative approaches for cause-effect assessment of seven major drivers of marine biodiversity loss: climate change, ocean acidification, eutrophication-induced hypoxia, seabed damage, overexploitation of biotic resources, invasive species and marine plastic debris. Our review shows that impact indicators can be developed for all identified drivers, albeit at different levels of coverage of cause-effect pathways and variable levels of uncertainty and spatial coverage. Modeling approaches to predict the spatial distribution and intensity of human-driven interventions in the marine environment are relatively well-established and can be employed to develop spatially-explicit LCA fate factors. Modeling approaches to quantify the effects of these interventions on marine biodiversity are less well-developed. We highlight specific research challenges to facilitate a coherent incorporation of marine biodiversity loss in LCA, thereby making LCA a more comprehensive and robust environmental impact assessment tool. Research challenges of particular importance include i) incorporation of the non-linear behavior of global circulation models (GCMs) within an LCA framework and ii) improving spatial differentiation, especially the representation of coastal regions in GCMs and ocean-carbon cycle models. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Baseline requirements for assessment of mining impact using biological monitoring

    International Nuclear Information System (INIS)

    Humphrey, C.L.; Dostine, P.L.

    1995-01-01

    Biological monitoring programmes for environmental protection should provide for both early detection of possible adverse effects, and assessment of the ecological significance of these effects. Monitoring techniques are required that include responses sensitive to the impact, that can be subjected to rigorous statistical analysis and for which statistical power is high. Such issues in baseline research of 'what and how to measure?' and 'for how long?' have been the focus of a programme being developed to monitor and assess effects of mining operations on the essentially pristine, freshwater ecosystems of the Alligator Rivers Region (ARR) in tropical northern Australia. Application of the BACIP (Before, After, Control, Impact, Paired differences) design, utilizing a form of temporal replication, to univariate (single species) and multivariate (community) data is described. The BACIP design incorporates data from single control and impact sites. We argue for modification of the design for particular studies conducted in streams, to incorporate additional independent control sites from adjacent catchment. Inferential power, by way of (i) more confidently attributing cause to an observed change and (ii) providing information about the ecological significance of the change, will be enhanced using a modified BACIP design. In highly valued environments such as the ARR, monitoring programmes require application of statistical tests with high power to guarantee that an impact no greater than a prescribed amount has gone undetected. A minimum number of baseline years using the BACIP approach would therefore be required in order to achieve some desired level of statistical power. This paper describes the results of power analyses conducted on 2-5 years (depending upon the technique) of baseline data from streams of the ARR and discuss the implications of these results for management. 44 refs., 1 tab., 3 figs

  9. Health impact assessment of the Atlanta BeltLine.

    Science.gov (United States)

    Ross, Catherine L; Leone de Nie, Karen; Dannenberg, Andrew L; Beck, Laurie F; Marcus, Michelle J; Barringer, Jason

    2012-03-01

    Although a health impact assessment (HIA) is a tool that can provide decision makers with recommendations to promote positive health impacts and mitigate adverse health impacts of proposed projects and policies, it is not routinely conducted on most major projects or policies. To make health a decision criterion for the Atlanta BeltLine, a multibillion-dollar transit, trails, parks, and redevelopment project. An HIA was conducted in 2005-2007 to anticipate and influence the BeltLine's effect on health determinants. Changes in access and equity, environmental quality, safety, social capital, and physical activity were forecast, and steps to maximize health benefits and reduce negative effects were recommended. Key recommendations included giving priority to the construction of trails and greenspace rather than residential and retail construction, making health an explicit goal in project priority setting, adding a public health professional to decision-making boards, increasing the connectivity between the BeltLine and civic spaces, and ensuring that affordable housing is built. BeltLine project decision makers have incorporated most of the HIA recommendations into the planning process. The HIA was cited in the awarding of additional funds of $7,000,000 for brownfield clean-up and greenspace development. The project is expected to promote the health of local residents more than in the absence of the HIA. This report is one of the first HIAs to tie specific assessment findings to specific recommendations and to identifiable impacts from those recommendations. The lessons learned from this project may help others engaged in similar efforts. Copyright © 2012. Published by Elsevier Inc.

  10. Discussion on the post-project assessment of environmental impact for nuclear facilities

    International Nuclear Information System (INIS)

    Shang Zhaorong

    2013-01-01

    The paper introduces the background of post-project assessment of environmental impact in the world and focuses on the characteristic of environmental impact assessment for Chinese nuclear facilities construction projects, analyzes the necessity, principle and contents of post-project assessment of environmental impact on current Chinese nuclear facilities operation. It is considered that to start the post-project assessment of environmental impact, perfect the post-project assessment mechanism, introduce the post-project assessment into environmental impact assessment system are just at the night time. (author)

  11. Application for approval of the Cold Lake Expansion Project: volume 2: environmental impact assessment: Part 1: biophysical and resource use assessment. Part 2: impact model descriptions

    International Nuclear Information System (INIS)

    Green, J.; Eccles, R.; Hegmann, G.; Morrison, L.; Salter, R.; van Egmond, T.; Vonk, P.; Ash, G.; Crowther, R.; Dance, T.; Edwards, W.; Veldman, W.

    1997-02-01

    An environmental assessment of the Cold Lake Expansion Project has been conducted to identify major issues of concern by public and government agencies, to determine means to eliminate or reduce those impacts, and to recommend any further efforts required to obtain missing information or monitor impacts. Volume 2 of the environmental impact assessment is divided into two parts. Part 1 (biophysical and resource use assessment) constitutes the primary environmental impact assessment document for the Cold Lake expansion project. It includes technical support documentation in regard to: (1) an assessment of noise impacts, (2) an assessment of greenhouse gas emissions, (3) a conceptual conservation and reclamation plan, (4) a historical resource impact assessment, and (5) a description of effects of oil spills on fish. Part 2 (impact model description) serves a reference document for part 1. It describes the approach taken in developing and assessing the impact models, discusses proposed methods for mitigation and management of residual impacts, and the recommended monitoring requirements for each of the major resource disciplines. The impact models describe the specific pathways through which impacts will occur as a result of interactions between project-related activities and important environmental components. 476 refs., 58 tabs., 23 figs

  12. Reconsidering the risk assessment concept: Standardizing the impact description as a building block for vulnerability assessment

    Directory of Open Access Journals (Sweden)

    K. Hollenstein

    2005-01-01

    Full Text Available Risk assessments for natural hazards are becoming more widely used and accepted. Using an extended definition of risk, it becomes obvious that performant procedures for vulnerability assessments are vital for the success of the risk concept. However, there are large gaps in knowledge about vulnerability. To alleviate the situation, a conceptual extension of the scope of existing and new models is suggested. The basis of the suggested concept is a stadardization of the output of hazard assessments. This is achieved by defining states of the target objects that depend on the impact and at the same time affect the object's performance characteristics. The possible state variables can be related to a limited set of impact descriptors termed generic impact description interface. The concept suggests that both hazard and vulnerability assessment models are developed according to the specification of this interface, thus facilitating modularized risk assessments. Potential problems related to the application of the concept include acceptance issues and the lacking accuracy of transformation of outputs of existing models. Potential applications and simple examples for adapting existing models are briefly discussed.

  13. Impact of response shift on the assessment of treatment effects using the Oral Health Impact Profile.

    Science.gov (United States)

    Reissmann, Daniel R; Remmler, Antje; John, Mike T; Schierz, Oliver; Hirsch, Christian

    2012-12-01

    The assessment of changes in oral health-related quality of life (OHRQoL) is challenging because individuals' concepts and internal standards of OHRQoL may change over time. The aim of this study was to detect response shifts in OHRQoL assessments made using the Oral Health Impact Profile (OHIP). Oral health-related quality of life was assessed in a consecutive sample of 126 patients seeking prosthodontic care. Patients were asked to rate their OHRQoL before treatment started and 1 month after treatment was finished, using the German 49-item version of the OHIP. When rating their OHRQoL after treatment, patients were also asked to rate their pre-treatment OHRQoL without having access to their baseline data. The response shift was calculated as the difference in OHIP summary scores between the initial assessment and the retrospective baseline assessment. The OHIP mean scores decreased from 31.8 at the initial baseline assessment to 24.4 after treatment. The retrospective baseline assessment resulted in an OHIP mean score of 38.1, corresponding to a response shift of 6.3 OHIP points. The effect size (Cohen's d = 0.21) of the response shift was considered small. The response shift phenomenon and its magnitude have important implications for dental practice, where patients and dentists often assess perceived treatment effects retrospectively. © 2012 Eur J Oral Sci.

  14. Life Cycle Assessment - Theory and Practice

    DEFF Research Database (Denmark)

    This book is a uniquely pedagogical while still comprehensive state-of-the-art description of LCA-methodology and its broad range of applications. The five parts of the book conveniently provide: I) the history and context of Life Cycle Assessment (LCA) with its central role as quantitative and s...... needed to perform an LCA. V) An appendix with an LCA report template, a full example LCA report serving as inspiration for students who write their first LCA report, and a more detailed overview of existing LCIA methods and their similarities and differences....

  15. Impact assessment of the contents of agricultural health discipline

    Directory of Open Access Journals (Sweden)

    Élida Fredesvinda Cordero Peña

    2013-06-01

    Full Text Available This article refers to the theoretical considerations in the process of assessing the impact of a program from the initial training requirements of a teacher's career Agricultural at the present time, so that once graduates are able to project themselves into matching their needs and possibilities. Our research has its practical exponent in the Agricultural Health discipline as science for the develop ment of knowledge, professional skills training and values, consistent with the protection of cultivated plants and domestic animals, in student’s career of Agricultural, at the University of Educational Sciences, in Pinar del Rio, Cuba.

  16. The probability safety assessment impact on the BR2 refurbishment

    International Nuclear Information System (INIS)

    Pouleur, Yvan

    1995-01-01

    The probabilistic safety assessment (PSA) study has proven its worth by establishing a sensitive safety screening of the reactor. It has focused engineering forces to technically improve safety systems and to measure the influence of functional modifications. In the future, the project will be developed in a living way, to reinforce the present structure along with continuous safety monitoring of the reactor and to develop engineers and operators safety skills. This paper presents the PSA impact on the BR2 (Belgian Reactor Two) refurbishment. (author)

  17. Impact Assessment of Climate Change on Forestry Development in China

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Forestry and forest ecosystem are highly sensitive to climate change.At present,studies about the responses of forests to climate change in China are more focused on physical influences of climate change.This paper firstly divided the key impact factors of climate change on forest and forestry developing into direct factors and indirect factors,and then made an assessment on climate change affecting future forestry development from the aspect of forest products and ecological services.On this basis,the adap...

  18. Wind galleries: an instrument for environmental impact assessment

    International Nuclear Information System (INIS)

    Zunino, C.

    1998-01-01

    In the last decades wind galleries for non-aeronautic utilisation have proved to be a useful investigation tool in various fields, such as studies on environmental impact and risk assessment, associated with permanent or incidental release of harmful substances. In this framework the feasibility of a new installation has been evaluated in Italy, having as main target the reproduction of thermal stratification phenomena. The great deal of 'hazardous' industries, often in areas having a complex orography, as well as the high pollution levels in Italian cities, lead to the conclusion that a thermally stratified wind gallery might be an economically viable investment [it

  19. Radiological impact assessment of building materials on ordinary houses dwellers

    International Nuclear Information System (INIS)

    Campos, M.P. de.

    1994-01-01

    The radiological impact due to building materials on habitants living in the Santo Andre district of Sao Paulo state, Brazil, was assessed through the total effective dose equivalent rate determination, for external and internal irradiation. The effective dose equivalent rate for external irradiation was calculated by the gamma spectrometry determination of natural radionuclides specific activity in the dwelling materials. The effective dose equivalent rate due to 222 Rn inhalation was calculated through the radon indoor activity determination by using solid state nuclear track detectors. (author). 46 refs, 6 figs, 14 tabs

  20. Bringing Stoves to the People: An Assessment of Impact

    International Nuclear Information System (INIS)

    Joseph, S.; Prasad, K.K; Van der Zaan, H.B

    1990-01-01

    The absence of reliable and in-depth information on the impact of improved cook-stove has required stove project managers, governments and donors to rely on unverified and anecdotal data for designing and implementing stove programmes. This survey was designed to provide a comprehensive and up-to-date assessment of world-wide stove activities. The report was a compilation of seven stove surveys carried out from Burkina Faso, Guatemala, India, Indonesia, Kenya and Niger. The report has indicated the benefits of using improved cook stoves that includes, conserving energy, reduction of indoor air pollution, improves household health, foster greater gender equality and stimulation of small-scale enterprise development