Cryogenics for the superconducting super collider: workshop proceedings

International Nuclear Information System (INIS)

1984-01-01

Attendance at the workshop and information meeting on Cryogenics for the SSC held at Brookhaven National Laboratory on January 17 to 19, 1984 consisted of 109 engineers and scientists from 19 industrial organizations and 18 laboratories and universities - CERN, DESY, Grenoble, KEK and Saclay were represented. About one-third of the participants were from Brookhaven National Laboratory and Fermi National Laboratory. Talks which concentrated on informing the audience of the present status of the SSC research and development activities and progress towards design of the components were given, experience with the cryogenic system of the Tevatron was reported, and a wrap-up session was held on the last day where each of the five workshop leaders gave a summary of their group's discussions and conclusions. A brief summary of these presentations is given, with the detailed information gathered by the group leaders forming the bulk of these proceedings

Study of axial injection of polarized protons into the grenoble cyclotron

International Nuclear Information System (INIS)

Pabot, J.

1969-01-01

By injecting ions axially into a cyclotron, it is possible to accelerate particles (polarized particles, heavy ions, etc...) obtainable only with difficulty when an internal ion source is used. In this work, after justifying the choice of an axial injection device equipped with a 'pseudo-cylindrical' deflector for the Grenoble cyclotron, we study theoretically the principle of such a detector, the choice of its parameters, and the effect of this choice on the conditions of acceleration of the beam by the cyclotron. From the experimental point of view, this report describes two operations which made it possible to check that the chosen injection device operated satisfactorily, qualitatively initially (electron model), then quantitatively (proton model). In conclusion, we believe that the Grenoble cyclotron thus equipped will be able to provide a relatively dense beam of polarized protons. (author) [fr

From Melusine to MINATEC. 1956-2006. 50 years of CENG history, which has become CEA-Grenoble

International Nuclear Information System (INIS)

Ballu, Y.

2006-01-01

This book, fully illustrated, relates 50 years of history of the nuclear research center of Grenoble (CENG), which is today the CEA-Grenoble. The book follows the chronological order, from the building up of the research center and of the Melusine reactor in the 1950's to the first steps in microelectronic research in the 1960's and to the creation in 2003 of MINATEC the first European research center on micro- and nano-technologies. (J.S.)

SISTEMA FEDERAL BRASILEIRO DE CUSTOS: UMA ANÁLISE COMPARATIVA À LUZ DAS RECOMENDAÇÕES DA IFAC.

Directory of Open Access Journals (Sweden)

Janilson Antonio da Silva Suzart

2012-12-01

Full Text Available Compreender de que forma são utilizados os recursos destinados pela sociedade para a Administração Pública é de suma importância em um ambiente democrático. Tanto a sociedade quanto os gestores públicos buscam analisar a relação custo-benefício das ações governamentais. Para se certificar de que os gestores públicos buscaram as melhores alternativas possíveis e não atuaram em sentido contrário ao anseio coletivo, a população necessita de instrumentos que acompanhem e avaliem as atividades governamentais. A sua vez, os gestores públicos, também, precisam de instrumentos que os auxiliem a tomar decisões que atendam às demandas sociais e estejam entre as melhores alternativas possíveis. Dentre outras áreas envolvidas com esta temática se encontra a Contabilidade de Custos. Seus instrumentos e suas técnicas podem auxiliar gestores e sociedade a avaliar o desempenho estatal. Em virtude da recente implementação do sistema federal brasileiro de custos, a presente pesquisa procurou analisar comparativamente as principais características deste sistema, tendo como parâmetros as recomendações feitas pela IFAC (International Federation of Accountants. Com este objetivo, foi utilizada uma abordagem qualitativa, sendo realizado um estudo exploratório com o emprego da técnica de análise comparativa. Foi identificado que, apesar de estar na fase inicial de implantação, o sistema brasileiro segue muitas das recomendações propostas pela IFAC. Todavia, o alinhamento das informações contábeis financeiras às normas internacionais, a necessidade de maior integração entre os sistemas gerenciais governamentais e a alocação apenas de custos diretos são pontos relevantes que necessitam ser aperfeiçoados visando melhorias na qualidade das informações produzidas por este sistema.

Modeling Friction in Modelica with the Lund-Grenoble Friction Model

OpenAIRE

Aberger, Martin; Otter, Martin

2002-01-01

The properties of the Lund-Grenoble friction model are summarized and different types of friction elements - bearing friction, clutch, one-way clutch, are implemented in Modelica using this friction formulation. The dynamic properties of these components are determined in simulations and compared with the friction models available in the Modelica standard library. This includes also an automatic gearbox model where 6 friction elements are coupled dynamically.

E-learning for students in their first year: a French experimentation at the medical school of Grenoble.

Science.gov (United States)

Renard, Jean-Marie; Pagonis, Daniel; Vuillez, Jean-Philippe; Romanet, Jean-Paul; Sele, Bernard

2007-01-01

A local study carried out in the Medical School of Grenoble shows that teaching in the first year in medicine studies satisfies neither the students, nor the teachers. The Faculty of Medicine of Grenoble decided to set up a reform in order to offer a high quality education. This reform leads to a complete reorganization of the curriculum and to the intensive use of new information and communication technologies of information, in particular, the use of multimedia documents. The communication and information technologies team of the Faculty of Medicine of Grenoble carried out an innovating and daring reform to start at the academic year 2006-2007. The new course is built on three activities: self learning on multi-media resources, meetings with teachers for questions-answers sessions and tutorials animated by older students. This article reports the first results for this successful project. In the academic year 2006-2007, are concerned 1290 students, 40 teachers and 8 disciplines.

PREFACE: 12th European Workshop on Advanced Control and Diagnosis (ACD 2015)

Science.gov (United States)

Straka, Ondřej; Punčochář, Ivo; Duník, Jindřich

2015-11-01

The 12th European Workshop on Advanced Control and Diagnosis (ACD 2015) took place at the Research Centre NTIS - New Technologies for the Information Society, Faculty of Applied Sciences, University of West Bohemia, Pilsen, Czech Republic, on November 19 - 20, 2015. The annual European Workshop on Advanced Control and Diagnosis has been organized since 2003 by Control Engineering departments of several European universities in Germany, France, the UK, Poland, Italy, Hungary, and Denmark to bring together senior and junior academics and engineers from diverse fields of automatic control, fault detection, and signal processing. The workshop provides an opportunity for researchers and developers to present their recent theoretical developments, practical applications, or even open problems. It also offers a great opportunity for industrial partners to express their needs and priorities and to review the current activities in the fields. A total of 74 papers have been submitted for ACD 2015. Based on the peer reviews 48 papers were accepted for the oral presentation and 10 papers for the poster presentation. The accepted papers covered areas of control theory and applications, identification, estimation, signal processing, and fault detection. In addition, four excellent plenary lectures were delivered by Prof. Fredrik Gustafsson (Automotive Sensor Mining for Tire Pressure Monitoring), Prof. Vladimír Havlena (Advanced Process Control for Energy Efficiency), Prof. Silvio Simani (Advanced Issues on Wind Turbine Modelling and Control), and Prof. Robert Babuška (Learning Control in Robotics). The ACD 2015 was for the first time in the workshop history co-sponsored by the International Federation of Automatic Control (IFAC). On behalf of the ACD 2015 organising committee, we would like to thank all those who prepared and submitted papers, participated in the peer review process, supported, and attended the workshop.

An investigation of ozone and planetary boundary layer dynamics over the complex topography of Grenoble combining measurements and modeling

OpenAIRE

Couach , O.; Balin , I.; Jiménez , R.; Ristori , P.; Perego , S.; Kirchner , F.; Simeonov , V.; Calpini , B.; Van Den Bergh , H.

2003-01-01

This paper concerns an evaluation of ozone (O3) and planetary boundary layer (PBL) dynamics over the complex topography of the Grenoble region through a combination of measurements and mesoscale model (METPHOMOD) predictions for three days, during July 1999. The measurements of O3 and PBL structure were obtained with a Differential Absorption Lidar (DIAL) system, situated 20 km south of Grenoble at Vif (310 m ASL). The combined lidar observations ...

The Grenoble CEA Center: dismantled and rehabilitated

International Nuclear Information System (INIS)

Anon.

2013-01-01

The denuclearization program of the CEA center in Grenoble was launched in 2001. It involves 6 nuclear facilities (3 research reactors: Melusine, Siloette, and Siloe, and 1 laboratory (LAMA) and 2 units for processing wastes). The dismantling works were finished at the end of 2012 and the 2013 program concerns: the demolition of the buildings homing Melusine and Siloe reactors, the final rehabilitation of the Siloe raft, and the final rehabilitation of the laboratory and of the waste processing units. The budget is 117*10 6 euros for Siloe, 28*10 6 euros for Melusine, 6*10 6 euros for Siloette, 70*10 6 euros for the LAMA, and 90*10 6 euros for the 2 waste processing units. (A.C.)

Follow-up of radiopharmaceuticals out of globally harmonized system (G.H.S.) at the C.H.U. of Grenoble; Suivi des medicaments radiopharmaceutiques hors GHS au CHU de Grenoble

Energy Technology Data Exchange (ETDEWEB)

Fabien, L.; Desruet, M.D.; Chauchet, X.; Foroni, L. [Radiopharmacie, pole de pharmacie, CHU de Grenoble, (France); Bourre, J.C.; Calizzano, A.; Crepin, C.; Vuillez, J.P. [service de medecine nucleaire, CHU de Grenoble, (France)

2009-05-15

The improvement and the secure of the radiopharmaceutical circuit in the service of nuclear medicine of the Grenoble C.H.U. are a permanent concern and a true team work between the doctors and the pharmacists. The implementation of cards allowed to optimize the radiopharmaceuticals management by avoiding expenses in relation with the non given drugs. (N.C.)

The dismantling of nuclear installations in the Grenoble CEA centre - Press book 2013

International Nuclear Information System (INIS)

Laveissiere, Stephane; Coronini, Vincent

2013-01-01

After having outlined the importance of the project for the Grenoble CEA centre, this document presents the objectives, issues and challenges of dismantling activities performed on various nuclear installations located in the CEA centre of Grenoble. Objectives are presented in terms of agenda, predicted production of radioactive wastes, budget, personnel and steering committee. The various nuclear installations are presented: experimental reactors (Melusine, Siloe, Siloette), LAMA (laboratory of analysis of active materials), STED (station for the treatment of effluents and wastes). The safety and protection of workers is addressed in terms of protection and monitoring measures, and of exposure to radiations. The next part deals with the monitoring of the environment (actors, history of control of the centre's releases, control points, releases, atmosphere monitoring, and hydrological monitoring). A second part presents the global strategy of the CEA for its activities of sanitation and nuclear dismantling: present operations, dismantling activities in Fontenay-aux-Roses and in Marcoule, economic organization, contribution of advanced technology in radiological measurement and control, simulation and modelling, decontamination techniques, cutting operations, and remotely controlled operations

Report on nuclear safety and transparency 2011 - Grenoble

International Nuclear Information System (INIS)

2012-06-01

After a brief presentation of the Grenoble CEA centre, this report indicates the different safety measures related to different risks, to emergency situations, to inspections and audits, and to nuclear base installations (INB). It describes measures related to radiation protection organisation and some remarkable facts which occurred in 2011. It presents the different significant events which occurred in 2011 and were declared to the ASN. It discusses the results of measurements of liquid and gaseous releases from the installations and their impact on the environment. It addresses the radioactive wastes which are warehoused on the site (measures to limit their volume and to limit their impact on health and on the environment, notably on water and soils, types and quantities of wastes stored in INBs)

La difusión de información financiera gubernamental en los países del Mercosur: su armonización a través de la aplicación de las IPSASs de la IFAC

Directory of Open Access Journals (Sweden)

Carmen Caba Pérez

2003-12-01

Full Text Available En los últimos años, numerosos países del ámbito iberoamericano están realizando reformas en sus sistemas de información contable pública, con la intención de mejorarlos. Aunque los cambios que se operan, por lo general, toman como punto de referencia la base de devengo, se siguen encontrando bastantes discrepancias en sus prácticas contables. No obstante, esta situación podría modificarse, ya que por primera vez un organismo internacional como es la Federación Internacional de Contadores (IFAC ha emitido una serie oficial de normas para la elaboración de informes financieros de entidades públicas que, en el caso de ser adoptadas, podrían contribuir activamente a la armonización contable. En este contexto, el objetivo de nuestro trabajo es llevar a cabo una comparación entre las prácticas de presentación de la información financiera recomendadas por las IPSAS de la IFAC y las que muestran las Cuentas Generales gubernamentales de los países del Mercosur, para así medir el grado de adaptación que sería necesario en cada una de ellas si se pretendiese lograr una armonización, tomando como referencia dicho modelo, en la difusión de la información financiera pública de estos países.In recent years, numerous Latin-American countries have been carrying out reforms in their public accounting systems with a view to improving the information that guides the decision-making process. However, bearing in mind that, in general terms, the accounting systems adopt the accrual basis, there still exist differences in accounting practices. Nevertheless, this situation could be modified since, for the first time, an international agency, which is the case of the International Federation of Accountants (IFAC, has issued official standards for the financial elaboration of public entities' reports which, if adopted, could actively contribute to accounting harmonization. In this context, the objective of our article is to compare the

Atomic physics at the Advanced Photon Source: Workshop report

International Nuclear Information System (INIS)

1990-10-01

The first Workshop on Atomic Physics at the Advanced Photon Source was held at Argonne National Laboratory on March 29--30, 1990. The unprecedented brightness of the Advanced Photon Source (APS) in the hard X-ray region is expected to make possible a vast array of new research opportunities for the atomic-physics community. Starting with discussions of the history and current status of the field, presentations were made on various future directions for research with hard X-rays interacting with atoms, ions, clusters, and solids. Also important were the discussions on the design and status of the four next-generation rings coming on line during the 1990's: the ALS 1.6 GeV ring at Berkeley; the ESRF 6.0-GeV ring at Grenoble (1993); the APS 7.0-GeV ring at Argonne (1995); and the SPring-8 8.0-GeV ring in Japan (1998). The participation of more than one hundred scientists from domestic as well as foreign institutions demonstrated a strong interest in this field. We plan to organize follow-up workshops in the future emphasizing specific research topics

Training and teaching with SILOETTE reactor and associated simulators at the Nuclear Research Centre of Grenoble

International Nuclear Information System (INIS)

Destot, M.

1983-10-01

Thanks to its three reactors SILOE (35 MW), MELUSINE (8 MW) and SILOETTE (100 KW), the Reactor Department of the Nuclear Research Centre of Grenoble has gained a considerable experience in the operation and utilization of research and material testing reactors. Inside of this general framework, the Reactor Department of Grenoble has built up a training and teaching centre that has been permanently active since 1975, with the aim of satisfying the considerable needs arising from the development of electro-nuclear power stations. The course is mainly intended for engineers and technicians who will be responsible for running power stations. A thorough series of practical exercices, carried out in the SILOETTE training reactor and in a PWR or in a Gas Cooled Reactor Simulator, desmonstrates the application of the theorical courses and familiarises the trainees with the behaviour of reactors and power stations

An investigation of ozone and planetary boundary layer dynamics over the complex topography of Grenoble combining measurements and modeling

Directory of Open Access Journals (Sweden)

O. Couach

2003-01-01

Full Text Available This paper concerns an evaluation of ozone (O3 and planetary boundary layer (PBL dynamics over the complex topography of the Grenoble region through a combination of measurements and mesoscale model (METPHOMOD predictions for three days, during July 1999. The measurements of O3 and PBL structure were obtained with a Differential Absorption Lidar (DIAL system, situated 20 km south of Grenoble at Vif (310 m ASL. The combined lidar observations and model calculations are in good agreement with atmospheric measurements obtained with an instrumented aircraft (METAIR. Ozone fluxes were calculated using lidar measurements of ozone vertical profiles concentrations and the horizontal wind speeds measured with a Radar Doppler wind profiler (DEGREANE. The ozone flux patterns indicate that the diurnal cycle of ozone production is controlled by local thermal winds. The convective PBL maximum height was some 2700 m above the land surface while the nighttime residual ozone layer was generally found between 1200 and 2200 m. Finally we evaluate the magnitude of the ozone processes at different altitudes in order to estimate the photochemical ozone production due to the primary pollutants emissions of Grenoble city and the regional network of automobile traffic.

Numerical Benchmark of 3D Ground Motion Simulation in the Alpine valley of Grenoble, France.

Science.gov (United States)

Tsuno, S.; Chaljub, E.; Cornou, C.; Bard, P.

2006-12-01

Thank to the use of sophisticated numerical methods and to the access to increasing computational resources, our predictions of strong ground motion become more and more realistic and need to be carefully compared. We report our effort of benchmarking numerical methods of ground motion simulation in the case of the valley of Grenoble in the French Alps. The Grenoble valley is typical of a moderate seismicity area where strong site effects occur. The benchmark consisted in computing the seismic response of the `Y'-shaped Grenoble valley to (i) two local earthquakes (Mlhandle surface topography, the other half comprises predictions based upon 1D (2 contributions), 2D (4 contributions) and empirical Green's function (EGF) (3 contributions) methods. Maximal frequency analysed ranged between 2.5 Hz for 3D calculations and 40 Hz for EGF predictions. We present a detailed comparison of the different predictions using raw indicators (e.g. peak values of ground velocity and acceleration, Fourier spectra, site over reference spectral ratios, ...) as well as sophisticated misfit criteria based upon previous works [2,3]. We further discuss the variability in estimating the importance of particular effects such as non-linear rheology, or surface topography. References: [1] Thouvenot F. et al., The Belledonne Border Fault: identification of an active seismic strike-slip fault in the western Alps, Geophys. J. Int., 155 (1), p. 174-192, 2003. [2] Anderson J., Quantitative measure of the goodness-of-fit of synthetic seismograms, proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, paper #243, 2004. [3] Kristekova M. et al., Misfit Criteria for Quantitative Comparison of Seismograms, Bull. Seism. Soc. Am., in press, 2006.

13th European Workshop on Advanced Control and Diagnosis (ACD 2016)

International Nuclear Information System (INIS)

2017-01-01

: a behavioral approach. The ACD 2016 has been co-sponsored technically by the International Federation of Automatic Control (IFAC). On behalf of the ACD 2016 organizing committee, we would like to thank all those who prepared and submitted papers, participated in the peer review process, supported, and attended the workshop. Abdel AITOUCHE - General Chair Josef KORBICZ - IPC Chair Vincent COCQUEMPOT - IPC Co-Chair (paper)

Study of the isotopic contamination with the Grenoble isotope separator

International Nuclear Information System (INIS)

Boge, Marc

1970-01-01

To know the limits of enrichment of the Grenoble electromagnetic isotope separator, we have studied the scattering of ions on the residual gas, and the chromatism. With Neodymium (Nd + ≅ 500 μA, NdO + ≅ 120 μA, Nd 2+ ≅ 70 μA) the second magnet has been used to analyse the ions which passed through the first stage slit. Therefore, we have measured the scattering with and without charge exchange of Nd + and the dissociation of NdO + . The chromatism has been studied by means of an electrostatic analyser, as a third stage. The limits of enrichment are obtained for Argon, Uranium and Neodymium. (author) [fr

Workshop on cooling of x-ray monochromators on high power beamlines

International Nuclear Information System (INIS)

Matsushita, T.; Ishikawa, T.

1989-03-01

This report is a Workshop on Cooling of X-ray Monochromators on High Power Beamlines held on August 31, 1988 at the Photon Factory during the Third International Conference on Synchrotron Radiation Instrumentation (SRI88). On high power beamlines, especially on insertion device beamlines, heating of crystal monochromators is becoming a serious problem: Researchers observe that the intensity of the X-ray beam on the sample is not proportional to the source intensity because of thermal distortion of the monochromator crystal. This problem will be even more serious on beamlines for the next generation X-ray rings. In the very tight program of the SRI88 conference, only 2 speakers were able to give invited talks closely related to this problem in the session of OPTICAL COMPONENTS FOR HIGH POWER BEAMLINES on Wednesday morning of August 31, 1988. We held this workshop in the afternoon of the same day with the intention of offering further opportunities to exchange information on efforts underway at various laboratories and to discuss ideas how to solve this problem. We also intended that the workshop would be a 'follow-up' to the X-ray optics workshop held at ESRF, Grenoble in September 1987, where the importance of crystal cooling was strongly pointed out. There were 32 participants from 7 countries. 12 people represented their experiences and ideas for reducing thermal distortion of crystal monochromators. Following those presentations, there were discussions on collaborations for solving this important problem. The attendees agreed that exchange of information should be continued by holding such meetings at reasonable intervals. (J.P.N.)

The 5th ATLAS Physics Workshop in Rome: Report from the Physics Sessions

CERN Multimedia

Cobal, M

The 5th ATLAS physics workshop took place between the 6th and the 11th of June in Rome (after Trest '95, Grenoble '98, Lund '01, and Athens '03). This event turned out to be a great occasion to review the status of the physics and detector performance studies, under the beautiful sun of Rome. It is quite difficult to summarize the 100 talks (for a total of about 35 hours of presentations and discussions): I will just try to give here the general flavour of the workshop structure and conclusions. Four groups represented the Combined Detector Performances: Flavour tagging, E/gamma, Muon Combined and Jet/missing-transverse-energy/Tau. The main focus has been on the results of trigger studies: one introductory and one final talk provided the frame for more detailed presentations embedded in the relevant sessions. Progress was shown also from the Combined Testbeam analyses, where the data from the full ATLAS slice, collected in 2004, are being validated on real data reconstruction algorithms. During the physics ...

PREFACE: 3rd International Workshop on Materials Analysis and Processing in Magnetic Fields (MAP3)

Science.gov (United States)

Sakka, Yoshio; Hirota, Noriyuki; Horii, Shigeru; Ando, Tsutomu

2009-07-01

The 3rd International Workshop on Materials Analysis and Processing in Materials Fields (MAP3) was held on 14-16 May 2008 at the University of Tokyo, Japan. The first was held in March 2004 at the National High Magnetic Field Laboratory in Tallahassee, USA. Two years later the second took place in Grenoble, France. MAP3 was held at The University of Tokyo International Symposium, and jointly with MANA Workshop on Materials Processing by External Stimulation, and JSPS CORE Program of Construction of the World Center on Electromagnetic Processing of Materials. At the end of MAP3 it was decided that the next MAP4 will be held in Atlanta, USA in 2010. Processing in magnetic fields is a rapidly expanding research area with a wide range of promising applications in materials science. MAP3 focused on the magnetic field interactions involved in the study and processing of materials in all disciplines ranging from physics to chemistry and biology: Magnetic field effects on chemical, physical, and biological phenomena Magnetic field effects on electrochemical phenomena Magnetic field effects on thermodynamic phenomena Magnetic field effects on hydrodynamic phenomena Magnetic field effects on crystal growth Magnetic processing of materials Diamagnetic levitation Magneto-Archimedes effect Spin chemistry Application of magnetic fields to analytical chemistry Magnetic orientation Control of structure by magnetic fields Magnetic separation and purification Magnetic field-induced phase transitions Materials properties in high magnetic fields Development of NMR and MRI Medical application of magnetic fields Novel magnetic phenomena Physical property measurement by Magnetic fields High magnetic field generation> MAP3 consisted of 84 presentations including 16 invited talks. This volume of Journal of Physics: Conference Series contains the proceeding of MAP3 with 34 papers that provide a scientific record of the topics covered by the conference with the special topics (13 papers) in

Dosimeter calibration facilities and methods at the Radiation Measurement Laboratory of the Centre d'etudes nucleaires, Grenoble

International Nuclear Information System (INIS)

Choudens, H. de; Herbaut, Y.; Haddad, A.; Giroux, J.; Rouillon, J.; CEA Centre d'Etudes Nucleaires de Grenoble, 38

1975-01-01

At the Centre d'etudes nucleaires, Grenoble, the Radiation Measurement Laboratory, which forms part of the Environmental Protection and Research Department, serves the entire Centre for purposes of dosimetry and the calibration of dose meters. The needs of radiation protection are such that one must have facilities for checking periodically the calibration of radiation-monitoring instruments and developing special dosimetry techniques. It was thought a good idea to arrange for the dosimetry and radiation protection team to assist other groups working at the Centre - in particular, the staff of the biology and radiobiology laboratories - and also bodies outside the framework of the French Commissariat a l'energie atomique. Thus, technical collaboration has been established with, for example, Grenoble's Centre hospitalier universitaire (university clinic), which makes use of the facilities and skills available at the Radiation Measurement Laboratory for solving special dosimetry problems. With the Laboratory's facilities it is possible to calibrate dose meters for gamma, beta and neutron measurements

Report on transparency and nuclear safety 2015 - Grenoble

International Nuclear Information System (INIS)

2016-06-01

This document proposes, first, a presentation of the Grenoble CEA centre, of its activities and installations. Then it gives a rather detailed overview of measures related to safety and to radiation protection within these activities and installations. Next, it reports significant events related to safety and to radiation protection which occurred in 2015 and which have been declared to the French nuclear safety authority (ASN). It discusses the results of release measurements (liquid and gaseous effluents, radiological assessment, and chemical assessment for various installations) and the control of the chemical and radiological impact of these gaseous and liquid effluents on the environment. Finally, it addresses the issue of radioactive wastes which are stored in the different nuclear base installations of the Centre. It indicates the different measures aimed at limiting the volume of these warehoused wastes and addresses their impact on health and environment. Nature and quantities of warehoused wastes are specified. Remarks and recommendations of the Health, Safety and Working Conditions Committee (CHSCT) are given

Working Group on Isotopes in Hydrology, Grenoble, October 1965

International Nuclear Information System (INIS)

1966-08-01

The purpose of this Working Group organised by the International Atomic Energy Agency, which met at the Centre d'Etudes Nucleaires in Grenoble by invitation of the French Atomic Energy Commission, was to provide an opportunity for the different groups engaged upon the use of isotope techniques in hydrology to discuss their present work and indicate the main lines of future work. In accordance with the decision of the meeting, members of the Section of Hydrology of the Agency have prepared this report based on written contributions submitted by participants of the meeting and on the discussions which took place. It is hoped that this report will be of interest not only to groups engaged in this work but also to hydrologists wishing to know what types of studies are in progress and where they are being carried

Control program of the neutron four-circle-diffractometer P32 at the SILOE reactor/CEN Grenoble

International Nuclear Information System (INIS)

Guth, H.; Paulus, H.; Reimers, W.; Heger, G.

1983-09-01

The four-circle diffractometer P32 for elastic neutron scattering on single crystals was installed at the SILOE reactor/CEN Grenoble in 1981. The control program, presented here, is a new update of the former program versions used at the FR2 reactor/Kernforschungszentrum Karlsruhe. Important improvements concerning reliability and handling of the diffractometer are added. (orig.) [de

Comparison between seismic and domestic risk in moderate seismic hazard prone region: the Grenoble City (France test site

Directory of Open Access Journals (Sweden)

F. Dunand

2012-02-01

Full Text Available France has a moderate level of seismic activity, characterized by diffuse seismicity, sometimes experiencing earthquakes of a magnitude of more than 5 in the most active zones. In this seismicity context, Grenoble is a city of major economic and social importance. However, earthquakes being rare, public authorities and the decision makers are only vaguely committed to reducing seismic risk: return periods are long and local policy makers do not have much information available. Over the past 25 yr, a large number of studies have been conducted to improve our knowledge of seismic hazard in this region. One of the decision-making concerns of Grenoble's public authorities, as managers of a large number of public buildings, is to know not only the seismic-prone regions, the variability of seismic hazard due to site effects and the city's overall vulnerability, but also the level of seismic risk and exposure for the entire city, also compared to other natural or/and domestic hazards. Our seismic risk analysis uses a probabilistic approach for regional and local hazards and the vulnerability assessment of buildings. Its applicability to Grenoble offers the advantage of being based on knowledge acquired by previous projects conducted over the years. This paper aims to compare the level of seismic risk with that of other risks and to introduce the notion of risk acceptability in order to offer guidance in the management of seismic risk. This notion of acceptability, which is now part of seismic risk consideration for existing buildings in Switzerland, is relevant in moderately seismic-prone countries like France.

Work of the social effects of automation committee from bad boll to enschede

NARCIS (Netherlands)

Withers, R.M.J.; Rijnsdorp, J.E.

1978-01-01

The paper summarises the activities of the IFAC Committee on Social Effects of Automation during the period 1974–1977. A workshop was held about ‘Productivity and Man’ at Bad Boll (F.R.G.) in January 1974. A number of Newsletters were published. Factory visits were made to a Steel Rolling Mill, an

Proceedings 3rd Workshop on GRAPH Inspection and Traversal Engineering (GRAPHITE 2014)

DEFF Research Database (Denmark)

2014-01-01

is to foster the convergence on research interests from several communities dealing with graph analysis in all its forms in computer science, with a particular attention to software development and analysis. Graphs are used to represent data and processes in many application areas, and they are subjected......These are the proceedings of the Third Workshop on GRAPH Inspection and Traversal Engineering (GRAPHITE 2014), which took place on April 5, 2014 in Grenoble, France, as a satellite event of the 17th European Joint Conferences on Theory and Practice of Software (ETAPS 2014). The aim of GRAPHITE...... to various computational algorithms in order to analyze them. Just restricting the attention to the analysis of software, graph analysis algorithms are used, for instance, to verify properties using model checking techniques that explore the system's state space graph or static analysis techniques based...

EI2N 2009 PC Co-chairs' Message

Science.gov (United States)

Panetto, Hervé; Bernus, Peter; Gonçalves, Ricardo; Goranson, Ted

After the successful third edition in 2008, the fourth edition of the Enterprise Integration, Interoperability and Networking workshop (EI2N 2009) was organized as part of the OTM 2009 Federated Conferences and was supported by the IFAC Technical Committee 5.3 "Enterprise Integration and Networking" and the IFIP Working Group 5.12 "Architectures for Enterprise Integration."

LPSC Grenoble. Activity report 2002-2003

International Nuclear Information System (INIS)

Voutier, E.; Cholat, C.; Chretien-Duhamel, G.; Collot, J.; Comparat, V.; Fruneau, M.; Genevey-Montaz, J.; Hostachy, J.Y.; Lamy, T.; Mayet, F.; Protassov, K.; Silvestre-Brac, B.; Tur, C.; Chretien-Duhamel, G.; Delage-Wolfers, A.; Favro, C.; Riffault, J.

2004-01-01

The Grenoble Subatomic Physics and Cosmology Laboratory - LPSC aims to improve our knowledge about the most elementary particles and about the forces that govern their interactions. It helps to broaden our understanding of the universe, its structure and its evolution. The LPSC is a Mixed Teaching and Research Unit, affiliated to the National Nuclear and Particle Physics Institute (IN2P3), the National Institute of Universe Sciences (INSU) and the National Institute of Engineering Sciences and Systems (INSIS) from the National Centre for Scientific Research (CNRS), as well as to the Joseph Fourier University and the Grenoble National Polytechnique Institute. The LPSC also plays a significant role at the national level and is involved in several international scientific and technical projects. Fundamental research is the driving force of LPSC activities. Among the themes studied at the LPSC, some are focused on the greatest unsolved mysteries of the universe, e.g. the unification of forces, the origin of the mass of particles, the origin of the matter-antimatter asymmetry in the universe and the search for dark matter and energy. Research starts at the scales of the nuclei of atoms and even much smaller, where quantum and relativistic physics laws prevail. The goal here is to understand the characteristics of the most elementary building blocks of matter and their interactions, to study the limits of existence of atoms and to discover new states of nuclear matter, such as the quark-gluon plasma. Research also extends towards the infinitely large; the goal here is to understand the origin of the structures of the universe and the cosmic phenomena that take place, and to understand the characteristics of the very first stages of the universe, just after the Big Bang. The branches of physics at these two extremes are actually closely linked. Infinitely small-scale physics plays an essential role in the first moments of the universe. Particle physics and cosmology both

Global results concerning the operation of the reactors at the Grenoble nuclear research centre

International Nuclear Information System (INIS)

Jacquemain, M.; Marouby, R.

1964-01-01

The Grenoble Nuclear Research Centre has 3 reactors of the open-core swimming-pool type: Melusine (2 MW) operating since 1959, Siloe (15 MW) operating since 1963, Siloette (100 kW) operating since 1964 The report describes the operating conditions of these reactors and the improvements which have been made to increase the flux in the irradiation rigs and to increase the safety and the regularity of operation. The advantages are also explained of having on the same site, close to one another, several reactors with wide ranges of flux. (authors) [fr

SILOETTE, a training centre for reactor physics at the Nuclear Research Centre of Grenoble

International Nuclear Information System (INIS)

Destot, M.

1983-10-01

The Reactor Department of Grenoble has created, based on Siloette, an activity of training in reactor physics, wich is running since 1975 to meet the important needs generated by the development of electronuclear power stations. Its essential goal is to provide an initiation to the basic physical phenomena which determine the operation of the reactors. For that purpose, a rather comprehensive program of practical works on reactor (SILOETTE) and on nuclear power station simulators (PWR, UNGG) is proposed besides lectures and conferences, general and specialized teaching on the reactor operation principle, kinetics, dynamics and thermics

Summer/winter variability of the surfactants in aerosols from Grenoble, France

Science.gov (United States)

Baduel, Christine; Nozière, Barbara; Jaffrezo, Jean-Luc

2012-02-01

Many atmospheric aerosols seem to contain strong organic surfactants likely to enhance their cloud-forming properties. Yet, few techniques allow for the identification and characterization of these compounds. Recently, we introduced a double extraction method to isolate the surfactant fraction of atmospheric aerosol samples, and evidenced their very low surface tension (≤30 mN m -1). In this work, this analytical procedure was further optimized. In addition to an optimized extraction and a reduction of the analytical time, the improved method led to a high reproducibility in the surface tension curves obtained (shapes and minimal values), illustrated by the low uncertainties on the values, ±10% or less. The improved method was applied to PM 10 aerosols from the urban area of Grenoble, France collected from June 2009 to January 2010. Significant variability was observed between the samples. The minimum surface tension obtained from the summer samples was systematically lower (30 mN m -1) than that of the winter samples (35-45 mN m -1). Sharp transitions in the curves together with the very low surface tensions suggested that the dominating surfactants in the summer samples were biosurfactants, which would be consistent with the high biogenic activity in that season. One group of samples from the winter also displayed sharp transitions, which, together with the slightly higher surface tension, suggested the presence of weaker, possibly man-made, surfactants. A second group of curves from the winter did not display any clear transition but were similar to those of macromolecular surfactants such as polysaccharides or humic substances from wood burning. These surfactants are thus likely to originate from wood burning, the dominating source for aerosols in Grenoble in winter. These observations thus confirm the presence of surfactants from combustion processes in urban aerosols reported by other groups and illustrates the ability of our method to distinguish between

D2B, a new high resolution neutron powder diffractometer at ILL Grenoble

International Nuclear Information System (INIS)

Hewat, A.W.

1987-01-01

Applications of high resolution neutron powder diffraction to materials science have grown rapidly in the past 10 years, with the development of Rietveld methods of profile refinement, and new high resolution diffractometers and multidetectors. Materials studied range from catalysts to zeolites, and from battery electrodes to prestressed superconducting wires. Although the techniques have now been adapted for X-ray and synchrotron radiation, neutron powder diffraction retains unique advantages. In this paper we describe the design and first test measurements on the latest high resolution powder diffractometer D2B at ILL Grenoble. A review of the applications is published in Chemica Scripta (1986). (author) 9 refs., 6 figs., 2 tabs

Accelerator mass spectrometry with the Grenoble and Orsay cyclotrons

International Nuclear Information System (INIS)

Raisbeck, G.M.; Yiou, F.

1981-01-01

Three and one half years ago, at the Rochester meeting, we presented our first accelerator mass spectrometry measurements of 10 Be using the external ion source of the Grenoble cyclotron. Since that time the technique has been used to measure 10 Be in more than 100 geophysical samples. We have also used the ALICE accelerator facility (linear accelerator plus cyclotron) at Orsay to detect 26 Al (half-life 730,000 years) and 41 Ca (100,000 years). While the latter measurements have so far been carried out only with enriched samples, they did demonstrate the feasibility of eliminating interference from lower atomic number isobars by analyzing fully stripped ions of the species being sought. We describe here the present experimental status of these two techniques, following closely two papers presented recently at another conference. We would like to stress that these techniques have not been developed arbitrarily, or as goals in themselves, but rather with certain applications in mind. It is therefore perhaps useful to first briefly outline these applications, which can be divided into three areas

OECD/CSNI Workshop on In-Vessel Core Debris Retention and Coolability - Summary and Conclusions

International Nuclear Information System (INIS)

Behbahani, Ali-Reza; Drozd, Andrzej; Kim, Sang-Baik; Micaelli, Jean-Claude; Okkonen, Timo; Sugimoto, Jun; Trambauer, Klaus; Tuomisto, Harri

1999-01-01

In the spring of 1994 an OECD Workshop on Large Pool Heat transfer was held in Grenoble. The scope of this workshop was the investigation of (1) molten pool heat transfer, (2) heat transfer to the surrounding water, and (3) the feasibility of in-vessel core debris cooling through external cooling of the vessel. Since this time, experimental test series have been completed (e.g., COPO, ULPU, CORVIS) and new experimental programs (e.g., BALI, SONATA, RASPLAV, debris and gap heat transfer) have been established to consolidate and expand the data base for further model development and to improve the understanding of in-vessel debris retention and coolability in a nuclear power plant. Discussions within the CSNI's PWG-2 and the Task Group on Degraded Core Cooling (TG-DCC) have led to the conclusion that the time was ripe for organizing a new international Workshop with the objectives: - to review the results of experimental research that has been conducted in this area; - to exchange information on the results of member countries experiments and model development on in-vessel core debris retention and coolability; - to discuss areas where additional experimental research is needed in order to provide an adequate data base for analytical model development for core debris retention and coolability. The scope of this workshop was limited to the phenomena connected to in-vessel core debris retention and coolability and did not include steam explosion and fission product issues. The workshop was structured into the following sessions: Key note papers; Experiments and model development; Debris bed heat transfer; Corium properties, molten pool convection and crust formation; Gap formation and gap cooling; Creep behaviour of reactor pressure vessel lower head; Ex-vessel boiling and critical heat flux phenomena; Scaling to reactor severe accident conditions and reactor applications. Compared to the previous workshop held in Grenoble in 1994, large progress has been made in the

Entry and Accommodation in Airline Markets: Easyjet Caught in the Middle on the London-Grenoble Route

OpenAIRE

Cristina Barbot

2006-01-01

Low cost carriers (LCCs) have recently proved that they can develop aggressive behaviour towards the threat of new entrants. This paper analyses the theoretical conditions under which a low cost carrier can deter or accommodate entry by means of product proliferation, using the example of Easyjet on the London-Grenoble route. Theoretical conclusions show that they can only deter entry if they launch a service with a quality that is superior to the entrant’s and to their own previous one. Othe...

Report on transparency and nuclear safety - Grenoble CEA centre - 2012

International Nuclear Information System (INIS)

2013-01-01

This report presents the different nuclear base installations (INB) of the Grenoble CEA centre, gives an overview of measures regarding safety within these installations (organisation, general arrangements, human and organizational factors, arrangements related to different risks, management of emergency situations, inspections, audits and second-level controls, arrangements and main events specific to the different installations and buildings) and of measures related to radiation protection (organisation and results, main events). It reports the significant events related to safety and radiation protection which occurred in 2012 and were declared to the ASN, and discusses how the return-on-experience has been used. It reports and comments the results of measurements of radiological and chemical gaseous and liquid effluents, of surveys of the environment. It also presents the environmental management approach. The next part addresses the management of radioactive wastes which are warehoused on this site: arrangements aimed at limiting their volume, and at limiting their impact on health and on the environment, waste production and removal, nature and quantities of warehoused wastes. Remarks and recommendations of the CHSCT are given

Visualization of atomic distances at the 1MV electron microscope: first results obtained on the Grenoble 1MV microscope

International Nuclear Information System (INIS)

Bourret, A.

1975-01-01

Practical and theoretical conditions for obtaining high resolution lattice images are presented. The use of a high voltage electron microscope is particularly powerful to visualize distances smaller than 3A. A 2A resolution test on (200) gold planes has been carried out on the Grenoble 1MV microscope. It would be possible at this level to study the crystalline defects such as dislocations or grain boundaries [fr

Synergy between the CIMENT tier-2 HPC centre and the HEP community at LPSC in Grenoble (France)

International Nuclear Information System (INIS)

Biscarat, C; Bzeznik, B

2014-01-01

Two of the most pressing questions in current research in Particle Physics are the characterisation of the newly discovered Higgs-like boson at the LHC and the search for New Phenomena beyond the Standard Model of Particle Physics. Physicists at LPSC in Grenoble are leading the search for one type of New Phenomena in ATLAS. Given the rich multitude of physics studies proceeding in parallel in ATLAS, one limiting factor in the timely analysis of data is the availability of computing resources. Another LPSC team suffers from the same limitation. This team is leading the ultimate precision measurement of the W boson mass with DØ data, which yields an indirect constraint on the Higgs boson mass which can be compared with the direct measurements of the mass of the newly discovered boson at LHC. In this paper, we describe the synergy between CIMENT, a regional multidisciplinary HPC centre, and the HEP community in Grenoble in the context of the analysis of data recorded by the ATLAS experiment at the LHC collider and the D0 experiment at the Tevatron collider. CIMENT is a federation of twelve HPC clusters, of about 90 TFlop/s, one of the most powerful HPC tier-2 centres in France. The sharing of resources between different scientific fields, like the ones discussed in this article, constitutes a great asset because the spikes in need of computing resources are uncorrelated in time between different fields.

GREENLYS. Grenoble and Lyon experiment with smart energy of the future

International Nuclear Information System (INIS)

2015-01-01

Electric power grid operators are facing new challenges, including rising energy consumption and emissions, the need to integrate renewable energy sources, and the emergence of electric vehicles. There is an urgent need to make grids safer, more efficient, environmentally 'greener', and more flexible. In a word: smarter. Schneider Electric has teamed with 4 partners (GEG, GDF Suez, ERDF and GINP) and 6 others on the GreenLys project, the first full-scale smart grid demonstration project in France. Partially financed by the French Environment and Energy Management Agency (ADEME), the consortium has developed an experimental technology platform being tested in the cities of Lyon and Grenoble, ultimately involving 1,000 residential customers and 40 commercial building sites. The goal is to standardize and showcase a functional smart grid by 2015, setting the stage for widespread deployment. The GreenLys project is testing innovative solutions from energy generation to end use. At the grid level this includes new analysis tools, next generation substation automation equipment, and communication with smart meters at consumer locations. The grid will be self-healing, quickly reconfiguring itself to maintain the supply of electricity. It will also incorporate decentralised energy generation based on renewables or natural gas, as well as the potential to use stored energy in electric vehicles. At the end-consumer level, a variety of new technologies are applied to engage businesses and homeowners. The cloud-based Demand-Side Operation platform will enable participation in programs like demand response that offer financial incentives for adjusting energy consumption when required. Such programs will help energy users optimize their energy bill and encourage energy-efficient practices. Offering their energy flexibility to the smart grid will also help alleviate peak demand and compensate for the intermittency of large-scale renewable energy production. For commercial

Beamline instrumentation and experiment automation for the Rossendorf Beamline at ESRF/Grenoble (F)

International Nuclear Information System (INIS)

Oehme, W.; Dienel, S.; Proehl, D.

2000-03-01

The Rossendorf research center finished the work (from 1996 - 1998) for building its own beamline for experiments with synchrotron radiation at the ESRF (European Synchrotron Radiation Facility) at Grenoble/France. The beamline has two measuring systems for alternative use for experiments investigating radioactive samples by means of X-ray absorption spectrometry, and materials structures by means of X-ray diffraction analyses. The report in hand focuses on work performed required for the control equipment for optical systems and performance of the measuring systems with respect to electronics, calculation methods, and software. Hardware components of importance to system instrumentation are explained, as well as the basic computing tasks and general software principles, and are illustrated with some examples. The general setting of the beamline is represented in a tabulated overview. The literature list serves as a guideline for detailed documentation. (orig./CB) [de

ATTRACTIVITE TERRITORIALE: L’IMPACT DE LA DIFFERENCE CULTURELLE. COMPARAISON ENTRE LES TERRITOIRES DE IASI (ROUMANIE ET DE GRENOBLE (FRANCE

Directory of Open Access Journals (Sweden)

Alain SPALANZANI

2015-04-01

Full Text Available Cet article cherche à comprendre si la culture, plus particulièrement économique, a un impact sur la capacité d’attractivité des activités économiques d’un territoire. Les territoires comparés sont les métropoles ou régions urbaines de Iasi1 en Roumanie et de Grenoble en France. Ces territoires sont sensiblement de taille comparable : 840 000 habitants pour Iasi, 750 000 pour Grenoble. Après avoir recueilli les perceptions d’acteurs économiques, une hiérarchisation de plus de 71 critères considérés comme importants dans la localisation des activités économiques est établie pour chacune des deux régions. La comparaison de l’importance accordée aux critères montre à la fois une certaine convergence des perceptions mais aussi de réelles divergences, en particulier au niveau des critères financiers. La vision lowcost et de sous-traitance des yèchennï, liée à un positionnement de l’industrie roumaine sur les marchés de biens intermédiaires, n’est absolument pas partagée par les grenoblois qui semblent orientés vers des stratégies plus offensives, en direction des marchés finaux.

CFD for Nuclear Reactor Safety Applications (CFD4NRS-4) - Workshop Proceedings

International Nuclear Information System (INIS)

2014-01-01

Following the CFD4NRS workshops held in Garching, Germany (Sept. 2006), Grenoble, France (Sep. 2008) and Washington D.C., USA (Sept. 2010), this Workshop is intended to extend the forum created for numerical analysts and experimentalists to exchange information in the application of CFD and CMFD to NRS issues and in guiding nuclear reactor design thinking. The workshop includes single-phase and multi-phase CFD applications, and offers the opportunity to present new experimental data for CFD validation. More emphasis has been given to the experiments, especially on two-phase flow, for advanced CMFD modelling for which sophisticated measurement techniques are required. Understanding of the physics has been depen before starting numerical analysis. Single-phase and multi-phase CFD simulations with a focus on validation were performed in areas such as: single-phase heat transfer, boiling flows, free-surface flows, direct contact condensation and turbulent mixing. These relate to NRS-relevant issues, such as pressurised thermal shock, critical heat flux, pool heat exchangers, boron dilution, hydrogen distribution in containments, thermal striping, etc. The use of systematic error quantification and the application of BPGs were strongly encouraged. Experiments providing data suitable for CFD or CMFD validation were also presented. These included local measurements using multi-sensor probes, laser-based techniques (LDV, PIV or LIF), hot-film/wire anemometry, imaging, or other advanced measuring techniques. There were over 150 registered participants at the CFD4NRS-4 workshop. The programme consisted of 48 technical papers. Of these, 44 were presented orally and 4 as posters. An additional 8 posters related to the OECD/NEA-KAERI sponsored CFD benchmark exercise on turbulent mixing in a rod bundle with spacers (MATiS-H) were presented and a special session was allocated for 6 video presentations. In addition, five keynote lectures were given by distinguished experts. The

Beam experiments with the Grenoble test electron cyclotron resonance ion source at iThemba LABS

Energy Technology Data Exchange (ETDEWEB)

Thomae, R., E-mail: rthomae@tlabs.ac.za; Conradie, J.; Fourie, D.; Mira, J.; Nemulodi, F. [iThemba LABS, P.O. Box 722, Somerset West 7130 (South Africa); Kuechler, D.; Toivanen, V. [CERN, BE/ABP/HSL, 1211 Geneva 23 (Switzerland)

2016-02-15

At iThemba Laboratory for Accelerator Based Sciences (iThemba LABS) an electron cyclotron ion source was installed and commissioned. This source is a copy of the Grenoble Test Source (GTS) for the production of highly charged ions. The source is similar to the GTS-LHC at CERN and named GTS2. A collaboration between the Accelerators and Beam Physics Group of CERN and the Accelerator and Engineering Department of iThemba LABS was proposed in which the development of high intensity argon and xenon beams is envisaged. In this paper, we present beam experiments with the GTS2 at iThemba LABS, in which the results of continuous wave and afterglow operation of xenon ion beams with oxygen as supporting gases are presented.

Time delay systems theory, numerics, applications, and experiments

CERN Document Server

Ersal, Tulga; Orosz, Gábor

2017-01-01

This volume collects contributions related to selected presentations from the 12th IFAC Workshop on Time Delay Systems, Ann Arbor, June 28-30, 2015. The included papers present novel techniques and new results of delayed dynamical systems. The topical spectrum covers control theory, numerical analysis, engineering and biological applications as well as experiments and case studies. The target audience primarily comprises research experts in the field of time delay systems, but the book may also be beneficial for graduate students alike. .

First commissioning results with the Grenoble test electron cyclotron resonance ion source at iThemba LABS

Energy Technology Data Exchange (ETDEWEB)

Thomae, R.; Conradie, J.; Delsink, H.; Du Plessis, H.; Fourie, D.; Klopp, M.; Kohler, I.; Lussi, C.; McAlister, R.; Ntshangase, S.; Sakildien, M. [iThemba LABS, P.O Box 722, Somerset West 7130 (South Africa); Hitz, D. [CEA/DRFMC, 17 Av. Des Martyrs, 38054, Grenoble Cedex 9 (France); Kuechler, D. [CERN, BE/ABP/HSL, 1211 Geneva 23 (Switzerland)

2012-02-15

iThemba Laboratory for Accelerator Based Science (iThemba LABS) is a multi-disciplinary accelerator facility. One of its main activities is the operation of a separated-sector cyclotron with a K-value of 200, which provides beams of various ion species. These beams are used for fundamental nuclear physics research in the intermediate energy region, radioisotope production, and medical physics applications. Due to the requirements of nuclear physics for new ion species and higher energies, the decision was made to install a copy of the so-called Grenoble test source (GTS) at iThemba LABS. In this paper, we will report on the experimental setup and the first results obtained with the GTS2 at iThemba LABS.

First commissioning results with the Grenoble test electron cyclotron resonance ion source at iThemba LABS

International Nuclear Information System (INIS)

Thomae, R.; Conradie, J.; Delsink, H.; Du Plessis, H.; Fourie, D.; Klopp, M.; Kohler, I.; Lussi, C.; McAlister, R.; Ntshangase, S.; Sakildien, M.; Hitz, D.; Kuechler, D.

2012-01-01

iThemba Laboratory for Accelerator Based Science (iThemba LABS) is a multi-disciplinary accelerator facility. One of its main activities is the operation of a separated-sector cyclotron with a K-value of 200, which provides beams of various ion species. These beams are used for fundamental nuclear physics research in the intermediate energy region, radioisotope production, and medical physics applications. Due to the requirements of nuclear physics for new ion species and higher energies, the decision was made to install a copy of the so-called Grenoble test source (GTS) at iThemba LABS. In this paper, we will report on the experimental setup and the first results obtained with the GTS2 at iThemba LABS.

The neutron small-angle camera D11 at the high-flux reactor, Grenoble

International Nuclear Information System (INIS)

Ibel, K.

1976-01-01

The neutron small-angle scattering system at the high-flux reactor in Grenoble consists of three major parts: the supply of cold neutrons via bent neutron guides; the small-angle camera D11; and the data handling facilities. The camera D11 has an overall length of 80 m. The effective length of the camera is variable. The full length of the collimator before the fixed sample position can be reduced by movable neutron guides; the second flight path of 40 m full length contains detector sites in various positions. Thus a large range of momentum transfers can be used with the same relative resolution. Scattering angles between 5 x 10 -4 and 0.5 rad and neutron wavelengths from 0.2 to 2.0 nm are available. A large-area position-sensitive detector is used which allows simultaneous recording of intensities scattered at different angles; it is a multiwire proportional chamber. 3808 elements of 1 cm 2 are arranged in a two-dimensional matrix. (Auth.)

Estágios evolutivos da contabilidade gerencial que preponderam em um polo industrial moveleiro = Evolutionary stages of IFAC managerial accounting that prevail in a furniture industrial pole

Directory of Open Access Journals (Sweden)

Edson Roberto Macohon

2016-07-01

Full Text Available O International Federations of Accountants (IFAC identificou quatro estágios evolutivos da contabilidade gerencial. Este estudo objetiva investigar os estágios evolutivos da contabilidade gerencial que preponderam em um polo industrial moveleiro. Para tal realizou-se pesquisa descritiva a partir de uma survey, tendo como população as 73 indústrias associadas ao Sindicato das Indústrias da Construção e do Mobiliário de São Bento do Sul, SC, Brasil, e uma amostra não-probabilística de 15 indústrias. Os resultados da pesquisa mostram que os artefatos da contabilidade gerencial com mais de 60% de indicações como projeto implantado são: simulações de rentabilidade dos produtos; custo dos produtos pelo custeio por absorção; acompanhamento da evolução dos indicadores não financeiros; índices econômico-financeiros como Return of Investment (ROI; Retorno sobre o Patrimônio Líquido (RSPL e índices de liquidez; redução do custo na fase de projeto de novo produto; planilhas de custos logísticos. Os artefatos que tiveram percentuais acima de 60% de indicações como projetos não implantados são: Custeio Baseado em Atividades (ABC; geração de relatórios por Business Inteligence (BI; Balanced Scorecard (BSC; Economic Value Added (EVA; preço de transferência e Just-in-time (JIT. The International Federations of Accountants (IFAC has identified four stages of progressive managerial accounting. This study aims at investigating the evolutionary stages of managerial accounting that prevail in a furniture industrial pole. For this, a descriptive research was carried out from a survey, having as population 73 industries associated with the Union of Industries and Construction of Furniture of São Bento do Sul, SC, Brazil, and a non-probability sample of 15 industries. The survey results have shown that the artifacts of managerial accounting that got more than 60% of indications, such as project implemented are: simulations of

Practical guide to dosimetry as applied in the research reactors of the Saclay and Grenoble nuclear research centers

International Nuclear Information System (INIS)

1968-01-01

Since the problems concerning neutron and gamma flux measurements which arise during irradiation experiments in the reactors in the Grenoble and Saclay Centres are of the same type, and since the solutions found are very often adopted in common, we have attempted to describe the methods we use at the present time. A brief description is given of the production of the detectors, the electronic apparatus; the formulae usually used for the interpretation of the measurements are given. A series of technical data cards give the most commonly used detector characteristics. These cards give the physical characteristics of the detectors, their nuclear constants, if any, the most suitable counting methods and the field of application. (authors) [fr

Proceedings of the International Workshop/Symposium on Ice Drilling Technology (2nd) Held at Calgary, Alberta, Canada on 30-31 August 1982.

Science.gov (United States)

1984-12-01

Laboratoire de Glaciologie C. Girard, A. Manouvrier, et Geophysique de l’Environnement, C. Rado and G. Ricou C.N.R.S., Grenoble, France ABSTRACT Using an...Gillet, C. Rado, Laboratoire de Glaciologie G. Marec, M. Maitre, et de Geophysique de l’Environnement J. Perrin and G. Ricou C.N.R.S., Grenoble, France

77 FR 31371 - Public Workshop: Privacy Compliance Workshop

Science.gov (United States)

2012-05-25

... presentations, including the privacy compliance fundamentals, privacy and data security, and the privacy... DEPARTMENT OF HOMELAND SECURITY Office of the Secretary Public Workshop: Privacy Compliance... Homeland Security Privacy Office will host a public workshop, ``Privacy Compliance Workshop.'' DATES: The...

Workshops som forskningsmetode

OpenAIRE

Ørngreen, Rikke; Levinsen, Karin Tweddell

2017-01-01

This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice, and workshops as a research methodology. Focusing primarily on the latter, this paper presents five studies on upper secondary and higher education teachers’ professional development and on teaching and learnin...

HTTR workshop (workshop on hydrogen production technology)

International Nuclear Information System (INIS)

Shiina, Yasuaki; Takizuka, Takakazu

2004-12-01

Various research and development efforts have been performed to solve the global energy and environmental problems caused by large consumption of fossil fuels. Research activities on advanced hydrogen production technology by the use of nuclear heat from high temperature gas cooled reactors, for example, have been flourished in universities, research institutes and companies in many countries. The Department of HTTR Project and the Department of Advanced Nuclear Heat Technology of JAERI held the HTTR Workshop (Workshop on Hydrogen Production Technology) on July 5 and 6, 2004 to grasp the present status of R and D about the technology of HTGR and the nuclear hydrogen production in the world and to discuss about necessity of the nuclear hydrogen production and technical problems for the future development of the technology. More than 110 participants attended the Workshop including foreign participants from USA, France, Korea, Germany, Canada and United Kingdom. In the Workshop, the presentations were made on such topics as R and D programs for nuclear energy and hydrogen production technologies by thermo-chemical or other processes. Also, the possibility of the nuclear hydrogen production in the future society was discussed. The workshop showed that the R and D for the hydrogen production by the thermo-chemical process has been performed in many countries. The workshop affirmed that nuclear hydrogen production could be one of the competitive supplier of hydrogen in the future. The second HTTR Workshop will be held in the autumn next year. (author)

New approach to the exotic phases of actinide compounds under unconventional experimental conditions

International Nuclear Information System (INIS)

Hiess, A.; Lander, G.H.

2012-01-01

We describe some collaborative experiments using large facilities that have been performed during the second year of the REIMEI project with the title above. Also discussed are the conclusions of the 2nd Workshop on this program, held at the Institut Laue Langevin, Grenoble, France, 1-3 Feb. 2012. (author)

Subatomic Physics and Cosmology Laboratory - LPSC Grenoble. Activity report 2006-2007

International Nuclear Information System (INIS)

Berat, Corinne; Baylac, Maud; Cholat, Christine; Collot, Johann; Derome, Laurent; Kox, Serge; Lamy, Thierry; Pelletier, Jacques; Renault, Cecile; Real, Jean-Sebastien; Regairaz, William; Richard, Jean-Marc; Vernay, Emmanuelle; Favro, Christian

2008-01-01

The Grenoble Subatomic Physics and Cosmology Laboratory - LPSC aims to improve our knowledge about the most elementary particles and about the forces that govern their interactions. It helps to broaden our understanding of the universe, its structure and its evolution. The LPSC is a Mixed Teaching and Research Unit, affiliated to the National Nuclear and Particle Physics Institute (IN2P3), the National Institute of Universe Sciences (INSU) and the National Institute of Engineering Sciences and Systems (INSIS) from the National Centre for Scientific Research (CNRS), as well as to the Joseph Fourier University and the Grenoble National Polytechnique Institute. The LPSC also plays a significant role at the national level and is involved in several international scientific and technical projects. Fundamental research is the driving force of LPSC activities. Among the themes studied at the LPSC, some are focused on the greatest unsolved mysteries of the universe, e.g. the unification of forces, the origin of the mass of particles, the origin of the matter-antimatter asymmetry in the universe and the search for dark matter and energy. Research starts at the scales of the nuclei of atoms and even much smaller, where quantum and relativistic physics laws prevail. The goal here is to understand the characteristics of the most elementary building blocks of matter and their interactions, to study the limits of existence of atoms and to discover new states of nuclear matter, such as the quark-gluon plasma. Research also extends towards the infinitely large; the goal here is to understand the origin of the structures of the universe and the cosmic phenomena that take place, and to understand the characteristics of the very first stages of the universe, just after the Big Bang. The branches of physics at these two extremes are actually closely linked. Infinitely small-scale physics plays an essential role in the first moments of the universe. Particle physics and cosmology both

Subatomic Physics and Cosmology Laboratory - LPSC Grenoble. Activity report 2004-2005

International Nuclear Information System (INIS)

Chretien-Duhamel, G.; Baylac, M.; Billebaud, A.; Cholat, C.; Collot, J.; Comparat, V.; Derome, L.; Lamy, T.; Lucotte, A.; Ollivier, N.; Real, J.S.; Regairaz, W.; Richard, J.M.; Silvestre-Brac, B.; Stutz, A.; Tur, C.; Favro, C.

2006-01-01

The Grenoble Subatomic Physics and Cosmology Laboratory - LPSC aims to improve our knowledge about the most elementary particles and about the forces that govern their interactions. It helps to broaden our understanding of the universe, its structure and its evolution. The LPSC is a Mixed Teaching and Research Unit, affiliated to the National Nuclear and Particle Physics Institute (IN2P3), the National Institute of Universe Sciences (INSU) and the National Institute of Engineering Sciences and Systems (INSIS) from the National Centre for Scientific Research (CNRS), as well as to the Joseph Fourier University and the Grenoble National Polytechnique Institute. The LPSC also plays a significant role at the national level and is involved in several international scientific and technical projects. Fundamental research is the driving force of LPSC activities. Among the themes studied at the LPSC, some are focused on the greatest unsolved mysteries of the universe, e.g. the unification of forces, the origin of the mass of particles, the origin of the matter-antimatter asymmetry in the universe and the search for dark matter and energy. Research starts at the scales of the nuclei of atoms and even much smaller, where quantum and relativistic physics laws prevail. The goal here is to understand the characteristics of the most elementary building blocks of matter and their interactions, to study the limits of existence of atoms and to discover new states of nuclear matter, such as the quark-gluon plasma. Research also extends towards the infinitely large; the goal here is to understand the origin of the structures of the universe and the cosmic phenomena that take place, and to understand the characteristics of the very first stages of the universe, just after the Big Bang. The branches of physics at these two extremes are actually closely linked. Infinitely small-scale physics plays an essential role in the first moments of the universe. Particle physics and cosmology both

The 400W at 1.8K Test Facility at CEA-Grenoble

Science.gov (United States)

Roussel, P.; Girard, A.; Jager, B.; Rousset, B.; Bonnay, P.; Millet, F.; Gully, P.

2006-04-01

A new test facility with a cooling capacity respectively of 400W at 1.8K or 800W at 4.5K, is now under nominal operation in SBT (Low Temperature Department) at CEA Grenoble. It has been recently used for thermohydraulic studies of two phase superfluid helium in autumn 2004. In the near future, this test bench will allow: - to test industrial components at 1.8K (magnets, cavities of accelerators) - to continue the present studies on thermohydraulics of two phase superfluid helium - to develop and simulate new cooling loops for ITER Cryogenics, and other applications such as high Reynolds number flows This new facility consists of a cold box connected to a warm compressor station (one subatmospheric oil ring pump in series with two screw compressors). The cold box, designed by AIR LIQUIDE, comprises two centrifugal cold compressors, a cold turbine, a wet piston expander, counter flow heat exchangers and two phase separators at 4.5K and 1.8K. The new facility uses a Programmable Logic Controller (PLC) connected to a bus for the measurements. The design is modular and will allow the use of saturated fluid flow (two phase flow at 1.8K or 4.5K) or single phase fluid forced flow. Experimental results and cooling capacity in different operation modes are detailed.

Measurement by γ spectrometry of specific activities of radioisotopes present in vegetal ashes. Study of variations of the ambient radioactivity level in the Grenoble transverse valley from March 1966 to August 1968

International Nuclear Information System (INIS)

Chevalier, Michel; Guitton, Pierre; Gagnaire, Janine; Ferard, Guy; Plebin, Roger; LACHET, Bernard

1969-08-01

The first part of this report addresses the dosimetry of γ emitting radio-elements which are present in vegetal samples. The dose measurements were performed by spectrometry and results were processed by using a least square method. The second part reports works performed in the Grenoble transverse valley by using the same techniques. Radioactivity fluctuations of various radio-elements ( 40 K, 54 Mn, 95 Zr + 95 Nb, 103 Ru + 106 Rh, 137 Cs, 137 Ba, 140 Ba + 140 La, 144 Ce + 144 Pr) in various vegetal species, in water and in sediments have been monitored in seven points of the Isere river banks, upstream and downstream the city of Grenoble, from March 1966 to August 1968. Fluctuations observed for each radio-element are explained by comparison with physiologic, hydrologic and atmospheric climate conditions. The principles of a systematic control of a site for the detection of possible radioactive pollutions are then defined [fr

Developing workshop module of realistic mathematics education: Follow-up workshop

Science.gov (United States)

Palupi, E. L. W.; Khabibah, S.

2018-01-01

Realistic Mathematics Education (RME) is a learning approach which fits the aim of the curriculum. The success of RME in teaching mathematics concepts, triggering students’ interest in mathematics and teaching high order thinking skills to the students will make teachers start to learn RME. Hence, RME workshop is often offered and done. This study applied development model proposed by Plomp. Based on the study by RME team, there are three kinds of RME workshop: start-up workshop, follow-up workshop, and quality boost. However, there is no standardized or validated module which is used in that workshops. This study aims to develop a module of RME follow-up workshop which is valid and can be used. Plopm’s developmental model includes materials analysis, design, realization, implementation, and evaluation. Based on the validation, the developed module is valid. While field test shows that the module can be used effectively.

Creating Fantastic PI Workshops

Energy Technology Data Exchange (ETDEWEB)

Biedermann, Laura B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Clark, Blythe G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Colbert, Rachel S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dagel, Amber Lynn [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gupta, Vipin P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hibbs, Michael R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Perkins, David Nikolaus [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); West, Roger Derek [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-10-01

The goal of this SAND report is to provide guidance for other groups hosting workshops and peerto-peer learning events at Sandia. Thus this SAND report provides detail about our team structure, how we brainstormed workshop topics and developed the workshop structure. A Workshop “Nuts and Bolts” section provides our timeline and check-list for workshop activities. The survey section provides examples of the questions we asked and how we adapted the workshop in response to the feedback.

Follow the guide!

CERN Multimedia

2003-01-01

For once it was the turn of the CERN guides to be shown around. A special tour had been organised for their annual outing on 24 June 2003, the aim of which was to go behind the scenes at research centres similar to CERN and discover the secrets of their public communications activities. The first stop was the European Synchrotron Radiation Facility (ESRF) in Grenoble, where the twenty or so CERN guides were welcomed by Dominique Cornujeols, head of communication at ESRF, who explained the Facility's history and purpose and how it operates before they were taken on a tour of the actual installations. CERN guides are welcomed to the ESRF (European Synchrotron Radiation Facility).The second visit of this trip to the Grenoble region was to the centre for science, technology and industry (CCSTI). "The people in charge at CCSTI showed us their day-to-day work in science and technology workshops", explains Stephan Petit, one of the guides. These workshops allow the public to discuss fundamental issues relating to a ...

Workshops as a Research Methodology

Science.gov (United States)

Ørngreen, Rikke; Levinsen, Karin

2017-01-01

This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice, and workshops as a research methodology. Focusing primarily on…

MOOC Design Workshop

DEFF Research Database (Denmark)

Nørgård, Rikke Toft; Mor, Yishay; Warburton, Steven

2016-01-01

For the last two years we have been running a series of successful MOOC design workshops. These workshops build on previous work in learning design and MOOC design patterns. The aim of these workshops is to aid practitioners in defining and conceptualising educational innovations (predominantly......, but not exclusively MOOCs) which are based on an empathic user-centered view of the target learners and teachers. In this paper, we share the main principles, patterns and resources of our workshops and present some initial results for their effectiveness...

Publicidade na ética profissional: uma comparação do CEPC com os códigos de ética da IFAC, OAB e CFM

Directory of Open Access Journals (Sweden)

Ivan Antonio Kretzer Santos

2006-07-01

Full Text Available Este trabalho tem como objetivo a comparação das determinações relativas à publicidade constantes do Código de Ética Profissional do Contabilista (CEPC, do Código de Ética para Contadores da Federação Internacional de Contadores (IFAC, do Código de Ética e Disciplina (CED, da Ordem dos Advogados do Brasil (OAB e do Código de Ética Médica (CEM, do Conselho Federal de Medicina (CFM. Quanto à metodologia, foi realizada uma pesquisa do tipo exploratório, abordando-se o assunto de forma qualitativa, com o emprego de dados levantados de forma bibliográfica. Com estes procedimentos chegou-se aos resultados desta pesquisa. O ordenamento ético atual da classe contábil no Brasil é canhado quanto à previsão de se realizar publicidade profissional. Acrescente-se a isto o fato do número de profissionais na área contábil ser relativamente grande. Conseqüência natural é a equiparação da contabilidade a uma atividade puramente mercantil, confundindo-se publicidade com mera propaganda se não forem observadas algumas regras de conduta. Contrariamente à regra pátria, o ordenamento ético internacional do contador veda literalmente a publicidade não institucional, rejeitando qualquer forma de publicidade puramente mercantil. Ainda, do mesmo modo que a regra internacional, os outros ordenamentos profissionais pátrios mencionados neste trabalho também restringem a publicidade profissional.

77 FR 12313 - Food Labeling Workshop; Public Workshop

Science.gov (United States)

2012-02-29

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2012-N-0001] Food Labeling Workshop; Public Workshop AGENCY: Food and Drug Administration, HHS. ACTION: Notice of... District Office (DALDO), in collaboration with Oklahoma State University (OSU), Robert M. Kerr Food...

75 FR 29775 - Food Labeling Workshop; Public Workshop

Science.gov (United States)

2010-05-27

... DEPARTMENT OF HEALTH AND HUMAN SERVICES [Docket No. FDA-2010-N-0001] Food and Drug Administration Food Labeling Workshop; Public Workshop AGENCY: Food and Drug Administration, HHS. ACTION: Notice of...: Institute of Food Science & Engineering, University of Arkansas, 2650 North Young Ave., Fayetteville, AR...

Proceedings of the Oak Ridge National Laboratory/Brookhaven National Laboratory workshop on neutron scattering instrumentation at high-flux reactors

International Nuclear Information System (INIS)

McBee, M.R.; Axe, J.D.; Hayter, J.B.

1990-07-01

For the first three decades following World War II, the US, which pioneered the field of neutron scattering research, enjoyed uncontested leadership in the field. By the mid-1970's, other countries, most notably through the West European consortium at Institut Laue-Langevin (ILL) in Grenoble, France, had begun funding neutron scattering on a scale unmatched in this country. By the early 1980's, observers charged with defining US scientific priorities began to stress the need for upgrading and expansion of US research reactor facilities. The conceptual design of the ANS facility is now well under way, and line-item funding for more advanced design is being sought for FY 1992. This should lead to a construction request in FY 1994 and start-up in FY 1999, assuming an optimal funding profile. While it may be too early to finalize designs for instruments whose construction is nearly a decade removed, it is imperative that we begin to develop the necessary concepts to ensure state-of-the-art instrumentation for the ANS. It is in this context that this Instrumentation Workshop was planned. The workshop touched upon many ideas that must be considered for the ANS, and as anticipated, several of the discussions and findings were relevant to the planning of the HFBR Upgrade. In addition, this report recognizes numerous opportunities for further breakthroughs on neutron instrumentation in areas such as improved detection schemes (including better tailored scintillation materials and image plates, and increased speed in both detection and data handling), in-beam monitors, transmission white beam polarizers, multilayers and supermirrors, and more. Each individual report has been cataloged separately

PREFACE: REXS 2013 - Workshop on Resonant Elastic X-ray Scattering in Condensed Matter

Science.gov (United States)

Beutier, G.; Mazzoli, C.; Yakhou, F.; Brown, S. D.; Bombardi, A.; Collins, S. P.

2014-05-01

The aim of this workshop was to bring together experts in experimental and theoretical aspects of resonant elastic x-ray scattering, along with researchers who are new to the field, to discuss important recent results and the fundamentals of the technique. The meeting was a great success, with the first day dedicated to students and new researchers in the field, who received introductory lectures and tutorials. All conference delegates were invited either to make an oral presentation or to present a poster, accompanied by a short talk. The first two papers selected for the REXS13 proceedings (Grenier & Joly and Helliwell) give a basic background to the theory of REXS and applications across a wide range of scientific areas. The remainder of the papers report on some of the latest scientific results obtained by applying the REXS technique to contemporary problems in condensed matter, materials and x-ray physics. It is hoped that these proceedings provide a snapshot of the current status of a vibrant and diverse scientific technique that will be of value not just to those who attended the workshop but also to any other reader with an interest in the subject. Local Scientific Committee REXS13 International Scientific Advisory Committee M Altarelli, European XFEL, Germany F de Bergevin, European Synchrotron Radiation Facility, France J Garcia-Ruiz, Universidad de Zaragoza, Spain A I Goldman, Iowa State University, USA M Goldmann, Institut Nanosciences, France T Schulli, European Synchrotron Radiation Facility, France C R Natoli, Laboratori Nazionali de Frascati, Italy G Materlik, Diamond Light Source, UK L Paolasini, European Synchrotron Radiation Facility, France U Staub, Paul Scherrer Institut, Switzerland K Finkelstein, Cornell University, USA Y Murakami, Photon Factory, Japan REXS13 Local Scientific Committee G Beutier, CNRS Grenoble, France C Mazzoli, Politecnico di Milano, Italy F Yakhou, European Synchrotron Radiation Facility, France S D Brown, XMaS UK CRG

Systems Engineering Workshops | Wind | NREL

Science.gov (United States)

Workshops Systems Engineering Workshops The Wind Energy Systems Engineering Workshop is a biennial topics relevant to systems engineering and the wind industry. The presentations and agendas are available for all of the Systems Engineering Workshops: The 1st NREL Wind Energy Systems Engineering Workshop

Applied antineutrino physics workshop

International Nuclear Information System (INIS)

Lund, James C.

2008-01-01

This workshop is the fourth one of a series that includes the Neutrino Geophysics Conference at Honolulu, Hawaii, which I attended in 2005. This workshop was organized by the Astro-Particle and Cosmology laboratory in the recently opened Condoret building of the University of Paris. More information, including copies of the presentations, on the workshop is available on the website: www.apc.univ-paris7.fr/AAP2007/. The workshop aims at opening neutrino physics to various fields such that it can be applied in geosciences, nuclear industry (reactor and spent fuel monitoring) and non-proliferation. The workshop was attended by over 60 people from Europe, USA, Asia and Brazil. The meeting was also attended by representatives of the Comprehensive nuclear-Test Ban Treaty (CTBT) and the International Atomic Energy Agency (IAEA). The workshop also included a workshop dinner on board of a river boat sailing the Seine river

Development of the high temperature ion-source for the Grenoble electromagnetic isotope separator; Etude et realisation de la source d'ions a haute temperature du separateur electromagnetique d'isotopes de Grenoble

Energy Technology Data Exchange (ETDEWEB)

Bouriant, M [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1967-12-01

The production of high purity stable or radioactive isotopes ({>=} 99.99 per cent) using electromagnetic separation require for equipment having a high resolving power. Besides, and in order to collect rare or short half-life isotopes, the efficiency of the ion-source must be high ({eta} > 5 to 10 per cent). With this in view, the source built operates at high temperatures (2500-3000 C) and makes use of ionisation by electronic bombardment or of thermo-ionisation. A summary is given in the first part of this work on the essential characteristics of the isotope separator ion Sources; a diagram of the principle of the source built is then given together with its characteristics. In the second part are given the values of the resolving power and of the efficiency of the Grenoble isotope separator fitted with such a source. The resolving power measured at 10 per cent of the peak height is of the order of 200. At the first magnetic stage the efficiency is between 1 and 26 per cent for a range of elements evaporating between 200 and 3000 C. Thus equipped, the separator has for example given, at the first stage, 10 mg of {sup 180}Hf at (99.69 {+-} 0.1) per cent corresponding to an enrichment coefficient of 580; recently 2 mg of {sup 150}Nd at (99.996 {+-} 0.002) per cent corresponding to an enrichment coefficient of 4.2 x 10{sup 5} has been obtained at the second stage. (author) [French] La production d'isotopes stables ou radioactifs de haute purete isotopique ({>=} 99.99 pour cent), par separation electromagnetique, exige des appareils de haut pouvoir de resolution. En outre, et en vue de collecter des isotopes de tres faible abondance ou de periode tres courte, le rendement des sources d'ions doit etre eleve ({eta} > 5 a 10 pour cent). Dans ce but, la source realisee fonctionne a haute temperature (2500-3000 C) et utilise l'ionisation par bombardement electronique, ou la thermoionisation. Dans la premiere partie de ce travail, on resume d'abord les caracteristiques

Peer-Review Writing Workshops in College Courses: Students’ Perspectives about Online and Classroom Based Workshops

Directory of Open Access Journals (Sweden)

Erin B. Jensen

2016-11-01

Full Text Available Peer-review workshops are commonly used in writing courses as a way for students to give their peers feedback as well as help their own writing. Most of the research on peer-review workshops focuses on workshops held in traditional in-person courses, with less research on peer-review workshops held online. Students in a freshman writing course experienced both a classroom based writing workshop and an online workshop and then took a survey about their experiences. The majority of the students preferred the online writing workshop because of the convenience of the workshop and being able to post anonymous reviews. Students whom preferred the traditional in-person writing workshop liked being able to talk with their peers about their papers. This research article focuses on the students’ responses and experiences with traditional and online peer-reviews.

ICP-MS Workshop

Energy Technology Data Exchange (ETDEWEB)

Carman, April J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Eiden, Gregory C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2014-11-01

This is a short document that explains the materials that will be transmitted to LLNL and DNN HQ regarding the ICP-MS Workshop held at PNNL June 17-19th. The goal of the information is to pass on to LLNL information regarding the planning and preparations for the Workshop at PNNL in preparation of the SIMS workshop at LLNL.

78 FR 33849 - Battery-Powered Medical Devices Workshop: Challenges and Opportunities; Public Workshop; Request...

Science.gov (United States)

2013-06-05

... after the public workshop on the Internet at http://www.fda.gov/MedicalDevices/NewsEvents/Workshops..., compact, and mobile, the number of battery-powered medical devices will continue to increase. While many...] Battery-Powered Medical Devices Workshop: Challenges and Opportunities; Public Workshop; Request for...

Supply chain management as the company engine in automotive manufacturing

OpenAIRE

Ferriols Martínez, Francisco José; Mula, Josefa; Díaz-Madroñero Boluda, Francisco Manuel

2013-01-01

©2013 International Federation of Automatic Control (IFAC). Originally published in IFAC-PapersOnLine (www.ifac-papersonline.net) The objective of this paper is to define how to create a supply chain management (SCM) organizational structure with roles and responsibilities in a multinational company with a big part of the supply chain inside of the company. SCM means having under control the complete supply chain to decide the global optimal instead of summing up the optimal of each node i...

Workshop Proceedings

DEFF Research Database (Denmark)

2012-01-01

, the main focus there is on spoken languages in their written and spoken forms. This series of workshops, however, offers a forum for researchers focussing on sign languages. For the third time, the workshop had sign language corpora as its main topic. This time, the focus was on the interaction between...... corpus and lexicon. More than half of the papers presented contribute to this topic. Once again, the papers at this workshop clearly identify the potentials of even closer cooperation between sign linguists and sign language engineers, and we think it is events like this that contribute a lot to a better...

Workshop report

African Journals Online (AJOL)

abp

2017-09-14

Sep 14, 2017 ... health: report of first EQUIST training workshop in Nigeria .... The difference between the before and after measurements was ... After the administration of the pre-workshop questionnaire the ... represent Likert rating scale of 1-5 points, where 1point = grossly .... Procedures Manual for the "Evaluating.

Workshops as a Research Methodology

DEFF Research Database (Denmark)

Ørngreen, Rikke; Levinsen, Karin Tweddell

2017-01-01

, and workshops as a research methodology. Focusing primarily on the latter, this paper presents five studies on upper secondary and higher education teachers’ professional development and on teaching and learning through video conferencing. Through analysis and discussion of these studies’ findings, we argue......This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice...... that workshops provide a platform that can aid researchers in identifying and exploring relevant factors in a given domain by providing means for understanding complex work and knowledge processes that are supported by technology (for example, e-learning). The approach supports identifying factors...

Risk Management Techniques and Practice Workshop Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Quinn, T; Zosel, M

2008-12-02

At the request of the Department of Energy (DOE) Office of Science (SC), Lawrence Livermore National Laboratory (LLNL) hosted a two-day Risk Management Techniques and Practice (RMTAP) workshop held September 18-19 at the Hotel Nikko in San Francisco. The purpose of the workshop, which was sponsored by the SC/Advanced Scientific Computing Research (ASCR) program and the National Nuclear Security Administration (NNSA)/Advanced Simulation and Computing (ASC) program, was to assess current and emerging techniques, practices, and lessons learned for effectively identifying, understanding, managing, and mitigating the risks associated with acquiring leading-edge computing systems at high-performance computing centers (HPCCs). Representatives from fifteen high-performance computing (HPC) organizations, four HPC vendor partners, and three government agencies attended the workshop. The overall workshop findings were: (1) Standard risk management techniques and tools are in the aggregate applicable to projects at HPCCs and are commonly employed by the HPC community; (2) HPC projects have characteristics that necessitate a tailoring of the standard risk management practices; (3) All HPCC acquisition projects can benefit by employing risk management, but the specific choice of risk management processes and tools is less important to the success of the project; (4) The special relationship between the HPCCs and HPC vendors must be reflected in the risk management strategy; (5) Best practices findings include developing a prioritized risk register with special attention to the top risks, establishing a practice of regular meetings and status updates with the platform partner, supporting regular and open reviews that engage the interests and expertise of a wide range of staff and stakeholders, and documenting and sharing the acquisition/build/deployment experience; and (6) Top risk categories include system scaling issues, request for proposal/contract and acceptance testing, and

Workshop meeting

International Nuclear Information System (INIS)

Veland, Oeystein

2004-04-01

1-2 September 2003 the Halden Project arranged a workshop on 'Innovative Human-System Interfaces and their Evaluation'. This topic is new in the HRP 2003-2005 programme, and it is important to get feedback from member organizations to the work that is being performed in Halden. It is also essential that relevant activities and experiences in this area from the member organizations are shared with the Halden staff and other HRP members. Altogether 25 persons attended the workshop. The workshop had a mixture of presentations and discussions, and was chaired by Dominique Pirus of EDF, France. Day one focused on the HRP/IFE activities on Human-System Interface design, including Function-oriented displays, Ecological Interface Design, Task-oriented displays, as well as work on innovative display solutions for the oil and gas domain. There were also presentations of relevant work in France, Japan and the Czech Republic. The main focus of day two was the verification and validation of human-system interfaces, with presentations of work at HRP on Human-Centered Validation, Criteria-Based System Validation, and Control Room Verification and Validation. The chairman concluded that it was a successful workshop, although one could have had more time for discussions. The Halden Project got valuable feedback and viewpoints on this new topic during the workshop, and will consider all recommendations related to the future work in this area. (Author)

Consequences of Switching to Blended Learning: The Grenoble Medical School Key Elements.

Science.gov (United States)

Houssein, Sahal; Di Marco, Lionel; Schwebel, Carole; Luengo, Vanda; Morand, Patrice; Gillois, Pierre

2018-01-01

In 2006, the Grenoble-Alpes University Medical School decided to switch the learning paradigm of the first year to a blended learning model based on a flipped classroom with a continuous dual assessment system providing personal follow-up. We report a descriptive analysis of two pedagogical models. The innovative blended learning model is divided into 5 week-sequences of learning, starting with a series of knowledge capsules, following with Interactive On Line Questions, Interactive On Site Training and an Explanation Meeting. The fourth and final steps are the dual assessment system that prepares for the final contest and the personal weekly follow-up. The data were extracted from the information systems over 17 years, during which the same learning model was applied. With the same student workload, the hourly knowledge/skills ratio decreased to approximately 50% with the blended learning model. The teachers' workload increased significantly in the first year (+70%), and then decreased each year (reaching -20%). Furthermore, the type of education has also changed for the teacher, from an initial hourly knowledge/skill ratio of 3, to a ratio of 1/3 with the new model after a few years. The institution also needed to resize the classroom from a large amphitheatre to small interactive learning spaces. There is a significant initial effort required to establish this model both for the teachers and for the institution, which have different needs and costs However, the satisfaction rates and the demand for extension to the other curriculums from medics and paramedics learners indicate that this model provides the enhanced learning paradigm of the future.

Observation of multiple Bragg reflections of neutrons in bent perfect crystals

Czech Academy of Sciences Publication Activity Database

Mikula, Pavol; Vrána, Miroslav; Šaroun, Jan; Seong, B. S.; Moon, MK.

2011-01-01

Roč. 634, č. 1 (2011), S108-S111 ISSN 0168-9002. [International Workshop on Neutron Optics. Grenoble, 17.03.2010-19.03.2010] R&D Projects: GA ČR GAP204/10/0654 Institutional research plan: CEZ:AV0Z10480505 Keywords : Neutron diffraction * Bent perfect crystal * Multiple reflections Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.207, year: 2011

Development of the high temperature ion-source for the Grenoble electromagnetic isotope separator

International Nuclear Information System (INIS)

Bouriant, M.

1968-01-01

The production of high purity stable or radioactive isotopes (≥ 99.99 per cent) using electromagnetic separation require for equipment having a high resolving power. Besides, and in order to collect rare or short half-life isotopes, the efficiency of the ion-source must be high (η > 5 to 10 per cent). With this in view, the source built operates at high temperatures (2500-3000 C) and makes use of ionisation by electronic bombardment or of thermo-ionisation. A summary is given in the first part of this work on the essential characteristics of the isotope separator ion Sources; a diagram of the principle of the source built is then given together with its characteristics. In the second part are given the values of the resolving power and of the efficiency of the Grenoble isotope separator fitted with such a source. The resolving power measured at 10 per cent of the peak height is of the order of 200. At the first magnetic stage the efficiency is between 1 and 26 per cent for a range of elements evaporating between 200 and 3000 C. Thus equipped, the separator has for example given, at the first stage, 10 mg of 180 Hf at (99.69 ± 0.1) per cent corresponding to an enrichment coefficient of 580; recently 2 mg of 150 Nd at (99.996 ± 0.002) per cent corresponding to an enrichment coefficient of 4.2 x 10 5 has been obtained at the second stage. (author) [fr

Subatomic Physics and Cosmology Laboratory - LPSC Grenoble. Activity report 2008-2009

International Nuclear Information System (INIS)

Berat, Corinne; Baylac, Maud; Cholat, Christine; Collot, Johann; Derome, Laurent; Kox, Serge; Lamy, Thierry; Pelletier, Jacques; Renault, Cecile; Real, Jean-Sebastien; Regairaz, William; Richard, Jean-Marc; Vernay, Emmanuelle; Favro, Christian

2010-01-01

The Grenoble Subatomic Physics and Cosmology Laboratory - LPSC aims to improve our knowledge about the most elementary particles and about the forces that govern their interactions. It helps to broaden our understanding of the universe, its structure and its evolution. The LPSC is a Mixed Teaching and Research Unit, affiliated to the National Nuclear and Particle Physics Institute (IN2P3), the National Institute of Universe Sciences (INSU) and the National Institute of Engineering Sciences and Systems (INSIS) from the National Centre for Scientific Research (CNRS), as well as to the Joseph Fourier University and the Grenoble National Polytechnique Institute. The LPSC also plays a significant role at the national level and is involved in several international scientific and technical projects. Fundamental research is the driving force of LPSC activities. Among the themes studied at the LPSC, some are focused on the greatest unsolved mysteries of the universe, e.g. the unification of forces, the origin of the mass of particles, the origin of the matter-antimatter asymmetry in the universe and the search for dark matter and energy. Research starts at the scales of the nuclei of atoms and even much smaller, where quantum and relativistic physics laws prevail. The goal here is to understand the characteristics of the most elementary building blocks of matter and their interactions, to study the limits of existence of atoms and to discover new states of nuclear matter, such as the quark-gluon plasma. Research also extends towards the infinitely large; the goal here is to understand the origin of the structures of the universe and the cosmic phenomena that take place, and to understand the characteristics of the very first stages of the universe, just after the Big Bang. The branches of physics at these two extremes are actually closely linked. Infinitely small-scale physics plays an essential role in the first moments of the universe. Particle physics and cosmology both

2014 Penn State Bioinorganic Workshop

Energy Technology Data Exchange (ETDEWEB)

Golbeck, John [Pennsylvania State Univ., State College, PA (United States)

2015-10-01

The 3rd Penn State Bioinorganic Workshop took place in early June 2014 and was combined with the 3rd Penn State Frontiers in Metallobiochemistry Symposium. The workshop was even larger than the 2nd Penn State Bioinorganic Workshop we offered in 2012. It had even more participants (162 rather than 123 in 2012). Like the 2012 workshop, the 2014 workshop had three parts. The first part consisted of 16 90-minute lectures presented by faculty experts on the topic of their expertise (see below). Based on the suggestions from the 2012 workshop, we have recorded all 16 lectures professionally and make them available to the entire bioinorganic community via online streaming. In addition, hard copies of the recordings are available as backup.

INDICO Workshop

CERN Multimedia

CERN. Geneva; Fabbrichesi, Marco

2004-01-01

The INtegrated DIgital COnferencing EU project has finished building a complete software solution to facilitate the MANAGEMENT OF CONFERENCES, workshops, schools or simple meetings from their announcement to their archival. Everybody involved in the organization of events is welcome to join this workshop, in order to understand the scope of the project and to see demonstrations of the various features.

The QED Workshop

Energy Technology Data Exchange (ETDEWEB)

Pieper, G.W.

1994-07-01

On May 18--20, 1994, Argonne National Laboratory hosted the QED Workshop. The workshop was supported by special funding from the Office of Naval Research. The purpose of the workshop was to assemble of a group of researchers to consider whether it is desirable and feasible to build a proof-checked encyclopedia of mathematics, with an associated facility for theorem proving and proof checking. Among the projects represented were Coq, Eves, HOL, ILF, Imps, MathPert, Mizar, NQTHM, NuPrl, OTTER, Proof Pad, Qu-Prolog, and RRL. Although the content of the QED project is highly technical rigorously proof-checked mathematics of all sorts the discussions at the workshop were rarely technical. No prepared talks or papers were given. Instead, the discussions focused primarily on such political, sociological, practical, and aesthetic questions, such as Why do it? Who are the customers? How can one get mathematicians interested? What sort of interfaces are desirable? The most important conclusion of the workshop was that QED is an idea worthy pursuing, a statement with which virtually all the participants agreed. In this document, the authors capture some of the discussions and outline suggestions for the start of a QED scientific community.

Global assessment of internal audit competence

African Journals Online (AJOL)

kirstam

of Accountants (IFAC) and the Global Accounting Alliance (GAA), adhere to the requirements as set out in the international education standards published by IFAC. (GAA 2015). These education standards emphasise the importance of competency- based professional development in the accounting and auditing professions ...

[Drug supply chain safety in hospitals: current data and experience of the Grenoble university hospital].

Science.gov (United States)

Bedouch, P; Baudrant, M; Detavernier, M; Rey, C; Brudieu, E; Foroni, L; Allenet, B; Calop, J

2009-01-01

Drug supply chain safety has become a priority for public health which implies a collective process. This process associates all health professionals including the pharmacist who plays a major role. The objective of this present paper is to describe the several approaches proven effective in the reduction of drug-related problem in hospital, illustrated by the Grenoble University Hospital experience. The pharmacist gets involved first in the general strategy of hospital drug supply chain, second by his direct implication in clinical activities. The general strategy of drug supply chain combines risk management, coordination of the Pharmacy and Therapeutics Committee, selection and purchase of drugs and organisation of drug supply chain. Computer management of drug supply chain is a major evolution. Nominative drug delivering has to be a prior objective and its implementation modalities have to be defined: centralized or decentralized in wards, manual or automated. Also, new technologies allow the automation of overall drug distribution from central pharmacy and the implementation of automated drug dispensing systems into wards. The development of centralised drug preparation allows a safe compounding of high risk drugs, like cytotoxic drugs. The pharmacist should develop his clinical activities with patients and other health care professionals in order to optimise clinical decisions (medication review, drug order analysis) and patients follow-up (therapeutic monitoring, patient education, discharge consultation).

Alternate fusion fuels workshop

International Nuclear Information System (INIS)

1981-06-01

The workshop was organized to focus on a specific confinement scheme: the tokamak. The workshop was divided into two parts: systems and physics. The topics discussed in the systems session were narrowly focused on systems and engineering considerations in the tokamak geometry. The workshop participants reviewed the status of system studies, trade-offs between d-t and d-d based reactors and engineering problems associated with the design of a high-temperature, high-field reactor utilizing advanced fuels. In the physics session issues were discussed dealing with high-beta stability, synchrotron losses and transport in alternate fuel systems. The agenda for the workshop is attached

The Third ATLAS ROD Workshop

CERN Multimedia

Poggioli, L.

A new-style Workshop After two successful ATLAS ROD Workshops dedicated to the ROD hardware and held at the Geneva University in 1998 and in 2000, a new style Workshop took place at LAPP in Annecy on November 14-15, 2002. This time the Workshop was fully dedicated to the ROD-TDAQ integration and software in view of the near future integration activities of the final RODs for the detector assembly and commissioning. More precisely, the aim of this workshop was to get from the sub-detectors the parameters needed for T-DAQ, as well as status and plans from ROD builders. On the other hand, what was decided and assumed had to be stated (like EB decisions and URDs), and also support plans. The Workshop gathered about 70 participants from all ATLAS sub-detectors and the T-DAQ community. The quite dense agenda allowed nevertheless for many lively discussions, and for a dinner in the old town of Annecy. The Sessions The Workshop was organized in five main sessions: Assumptions and recommendations Sub-de...

Controllership as a Governance Instrument in the Public Sector

Directory of Open Access Journals (Sweden)

Mônica Clark Nunes Cavalcante

2013-03-01

Full Text Available Controllership is considered a Corporate Governance instrument, to the extent that it can contribute to reduce information asymmetry ad conflicts of interest, deriving from agency problems between organizational owners and managers, by making available information that permit valuing the organization and the extent to which its goals are achieved. Disclosure and accountability are basic pillars of Corporate Governance as well as Controllership. The Public Sector Committee (PSC of the International Federation of Accountants (IFAC developed a study on governance for the public context, considering that governance principles should be present in public entities, reflected in four dimensions, two of which related to control and to the availability of external reports (Federação Internacional dos Contadores [IFAC] (2001. The main goal in this research is to identify which information the Office of the Comptroller General (CGU makes available on its website comply with the type and contents of IFAC recommendations for control and external reports, as governance dimensions in the public sector. Through a bibliographic and documentary research, it was verified that only information related to budgetary and financial reports comply with the type and contents recommended by IFAC. The research also revealed that information related to internal audit and annual Government accountability partially address the contents recommended by IFAC.

Emergency response workers workshop

International Nuclear Information System (INIS)

Agapeev, S.A.; Glukhikh, E.N.; Tyurin, R.L.

2012-01-01

A training workshop entitled Current issues and potential improvements in Rosatom Corporation emergency prevention and response system was held in May-June, 2012. The workshop combined theoretical training with full-scale practical exercise that demonstrated the existing innovative capabilities for radiation reconnaissance, diving equipment and robotics, aircraft, emergency response and rescue hardware and machinery. This paper describes the activities carried out during the workshop [ru

2015 Inverter Workshop | Photovoltaic Research | NREL

Science.gov (United States)

Inverter Workshop 2015 Inverter Workshop Wednesday, February 25, 2015 Chair: Jack Flicker In about inverters. This workshop represented a follow-on to the inverter workshops that Sandia National conversations between module and inverter experts. Agenda For a detailed schedule of the day's events, access

First International Workshop on Grid Simulator Testing of Wind Turbine Drivetrains: Workshop Proceedings

Energy Technology Data Exchange (ETDEWEB)

Gevorgian, V.; Link, H.; McDade, M.; Mander, A.; Fox, J. C.; Rigas, N.

2013-11-01

This report summarizes the proceedings of the First International Workshop on Grid Simulator Testing of Wind Turbine Drivetrains, held from June 13 to 14, 2013, at the National Renewable Energy Laboratory's National Wind Technology Center, located south of Boulder, Colorado. The workshop was sponsored by the U.S. Department of Energy and cohosted by the National Renewable Energy Laboratory and Clemson University under ongoing collaboration via a cooperative research and development agreement. The purpose of the workshop was to provide a forum to discuss the research, testing needs, and state-of-the-art apparatuses involved in grid compliance testing of utility-scale wind turbine generators. This includes both dynamometer testing of wind turbine drivetrains ('ground testing') and field testing grid-connected wind turbines. Four sessions followed by discussions in which all attendees of the workshop were encouraged to participate comprised the workshop.

Tandem mirror theory workshop

International Nuclear Information System (INIS)

1981-05-01

The workshop was divided into three sections which were constituted according to subject matter: RF Heating, MHD Equilibrium and Stability, and Transport and Microstability. An overview from Livermore's point of view was given at the beginning of each session. Each session was assigned a secretary to take notes. These notes have been used in preparing this report on the workshop. The report includes the activities, conclusions, and recommendations of the workshop

International cooperation workshop. Regional workshop for CTBTO international cooperation: Africa

International Nuclear Information System (INIS)

1999-08-01

Pursuant to the 1999 programme of work, and following the International Cooperation Workshop held in Vienna, Austria, in 1998, the Provisional Technical Secretariat (PTS) of the Preparatory Commission for the CTBTO (Prep Com) held a regional Workshop for CTBTO International Cooperation in Cairo. The purpose of the workshop was to identify how and by what means the Africa region can promote international cooperation in CTBT verification related technologies, and how the region can benefit from and contribute to Prep Com activity. PTS staff briefed the 40 participants from 22 African States who attended the Workshop on general aspects, including costs, of the establishment and operation of the CTBT verification system, including its four monitoring technologies. Participants were informed on opportunities for local institutions in the establishment of monitoring stations and on possible support for national and regional data centres. National experts presented their research and development activities and reviewed existing experiences on bi/multi-lateral cooperation. The main points of the discussion focused on the need to engage governments to advance signature/ratification, and further training opportunities for African states

75 FR 58411 - Center for Veterinary Medicine eSubmitter Workshop; Public Workshop; Request for Comments

Science.gov (United States)

2010-09-24

...] Center for Veterinary Medicine eSubmitter Workshop; Public Workshop; Request for Comments AGENCY: Food... Drug Administration (FDA) is announcing a public workshop entitled: ``Center for Veterinary Medicine... be emailed to all registrants. Contact Person: Charles Andres, Center for Veterinary Medicine (HFV...

INFORMATION SYSTEMS AUDIT CURRICULA CONTENT MATCHING

Directory of Open Access Journals (Sweden)

Vasile-Daniel CARDOȘ

2014-11-01

Full Text Available Financial and internal auditors must cope with the challenge of performing their mission in technology enhanced environment. In this article we match the information technology description found in the International Federation of Accountants (IFAC and the Institute of Internal Auditors (IIA curricula against the Model Curriculum issued by the Information Systems Audit and Control Association (ISACA. By reviewing these three curricula, we matched the content in the ISACA Model Curriculum with the IFAC International Education Practice Statement 2 and the IIAs’ Global Model Internal Audit Curriculum. In the IFAC and IIA Curriculum there are 16 content elements, out of 19 possible, which match, in their description, the ISACA Model Curriculum’s content. We noticed that a candidate who graduates an IFAC or IIA compliant program acquire IS auditing competences similar to the specific content of the ISACA model curriculum but less than the requirements for a professional information systems auditor.

Network workshop

DEFF Research Database (Denmark)

Bruun, Jesper; Evans, Robert Harry

2014-01-01

This paper describes the background for, realisation of and author reflections on a network workshop held at ESERA2013. As a new research area in science education, networks offer a unique opportunity to visualise and find patterns and relationships in complicated social or academic network data....... These include student relations and interactions and epistemic and linguistic networks of words, concepts and actions. Network methodology has already found use in science education research. However, while networks hold the potential for new insights, they have not yet found wide use in the science education...... research community. With this workshop, participants were offered a way into network science based on authentic educational research data. The workshop was constructed as an inquiry lesson with emphasis on user autonomy. Learning activities had participants choose to work with one of two cases of networks...

Workshop report: US-China workshop on smart structures and smart systems

Science.gov (United States)

Tomizuka, Masayoshi

2006-03-01

A Joint U.S.-China workshop on the topic of Integrated Sensing Systems, Mechatronics and Smart Structures Technologies was held in Jinan, China in October 2005 to evaluate the current status of research and education in the topic areas in the United States and China, to identify critical and strategic research and educational issues of mutual interest, and to identify joint research projects and potential research teams for collaborative research activities. The workshop included a series of presentations by leading researchers and educators from the United States and China and group discussions on the workshop objectives.

The Astronomy Workshop

Science.gov (United States)

Hamilton, D. P.; Asbury, M. L.; Proctor, A.

2001-12-01

The Astronomy Workshop (http://janus.astro.umd.edu) is an interactive online astronomy resource developed, and maintained at the University of Maryland, for use by students, educators and the general public. The Astronomy Workshop has been extensively tested and used successfully at many different levels, including High School and Junior High School science classes, University introductory astronomy courses, and University intermediate and advanced astronomy courses. Some topics currently covered in the Astronomy Workshop are: Animated Orbits of Planets and Moons: The orbits of the nine planets and 91 known planetary satellites are shown in animated, to-scale drawings. The orbiting bodies move at their correct relative speeds about their parent, which is rendered as an attractive, to-scale gif image. Solar System Collisions: This most popular of our applications shows what happens when an asteroid or comet with user-defined size and speed impacts a given planet. The program calculates many effects, including the country impacted (if Earth is the target), energy of the explosion, crater size, magnitude of the planetquake generated. It also displays a relevant image (e.g. terrestrial crater, lunar crater, etc.). Planetary and Satellite Data Calculators: These tools allow the user to easily calculate physical data for all of the planets or satellites simultaneously, making comparison very easy. Orbital Simulations: These tools allow the student to investigate different aspects of the three-body problem of celestial mechanics. Astronomy Workshop Bulletin Board: Get innovative teaching ideas and read about in-class experiences with the Astronomy Workshop. Share your ideas with other educators by posting on the Bulletin Board. Funding for the Astronomy Workshop is provided by the National Science Foundation.

Innovative confinement concepts workshop

International Nuclear Information System (INIS)

Kirkpatrick, R.C.

1998-01-01

The Innovative Confinement Concepts Workshop occurred in California during the week preceding the Second Symposium on Current Trends in International Fusion Research. An informal report was made to the Second Symposium. A summary of the Workshop concluded that some very promising ideas were presented, that innovative concept development is a central element of the restructured US DOE. Fusion Energy Sciences program, and that the Workshop should promote real scientific progress in fusion

Hydropower and Environmental Sustainability - HydroES 2016 Report on the Conference held by SHF in Grenoble on March 16-17, 2016

International Nuclear Information System (INIS)

Barillier, Agnes; Caignaert, Guy; Gouraud, Veronique; Ramos, Maria-Helena; Roult, Didier; Viollet, Pierre-Louis

2016-01-01

Hydropower is an important source of renewable energy for electrical production in Europe and throughout the world. Being flexible and allowing energy storage, it also facilitates the development of intermittent energy in electricity systems. The development, operation and maintenance of hydropower production are closely related to growing concerns on environment sustainability, climate change mitigation and meeting societal needs for energy. Reliable and efficient hydropower facilities can improve hydropower performance and the environmental acceptability of new projects when they are also planned to protect the environment in which they operate. This document presents a synthesis report of the international conference HydroES 2016 - Hydropower and Environmental Sustainability, organized by SHF and hosted by INP ENSE3, in Grenoble, on 16-17 March 2016. It shows that the scientific community and the hydropower industry are committed to assessing environment and social impacts of hydropower and are proactive towards a sustainable future. (authors)

IPCC workshop on impacts of ocean acidification on marine biology and ecosystems. Workshop report

Energy Technology Data Exchange (ETDEWEB)

Field, C.B.; Barros, V.; Stocker, T.F.; Dahe, Q.; Mach, K.J.; Plattner, G.-K.; Mastrandrea, M.D.; Tignor, M.; Ebi, K.L.

2011-09-15

Understanding the effects of increasing atmospheric CO{sub 2} concentrations on ocean chemistry, commonly termed ocean acidification, as well as associated impacts on marine biology and ecosystems, is an important component of scientific knowledge about global change. The Fifth Assessment Report (AR5) of the Intergovernmental Panel on Climate Change (IPCC) will include comprehensive coverage of ocean acidification and its impacts, including potential feedbacks to the climate system. To support ongoing AR5 assessment efforts, Working Group II and Working Group I (WGII and WGI) of the IPCC held a joint Workshop on Impacts of Ocean Acidification on Marine Biology and Ecosystems in Okinawa, Japan, from 17 to 19 January 2011. The workshop convened experts from the scientific community, including WGII and WGI AR5 authors and review editors, to synthesise scientific understanding of changes in ocean chemistry due to increased CO{sub 2} and of impacts of this changing chemistry on marine organisms, ecosystems, and ecosystem services. This workshop report summarises the scientific content and perspectives presented and discussed during the workshop. It provides syntheses of these perspectives for the workshop's core topics: (i) the changing chemistry of the oceans, (ii) impacts of ocean acidification for individual organisms, and (iii) scaling up responses from individual organisms to ecosystems. It also presents summaries of workshop discussions of key cross-cutting themes, ranging from detection and attribution of ocean acidification and its impacts to understanding ocean acidification in the context of other stressors on marine systems. Additionally, the workshop report includes extended abstracts for keynote and poster presentations at the workshop. (Author)

Workshop on Subcritical Neutron Production

International Nuclear Information System (INIS)

Walter Sadowski; Roald Sagdeev

2006-01-01

Executive Summary of the Workshop on Subcritical Neutron Production A workshop on Subcritical Neutron Production was sponsored by the East-West Center of the University of Maryland on October 11-13, 2004. The subject of the workshop was the application of subcritical neutrons to transmutation of actinides. The workshop was attended by members of the fission, accelerator and fusion communities. Papers on the state of development of neutron production by accelerators, fusion devices, and fission reactors were presented. Discussions were held on the potential of these technologies to solve the problems of spent nuclear waste storage and nuclear non-proliferation presented by current and future nuclear power reactors. A list of participants including their affiliation and their E-Mail addresses is attached. The workshop concluded that the technologies, presently available or under development, hold out the exciting possibility of improving the environmental quality and long term energy resources of nuclear power while strengthening proliferation resistance. The workshop participants agreed on the following statements. The workshop considered a number of technologies to deal with spent nuclear fuels and current actinide inventories. The conclusion was reached that substantial increase in nuclear power production will require that the issue of spent nuclear fuel be resolved. The Workshop concluded that 14 MeV fusion neutrons can be used to destroy nuclear reactor by-products, some of which would otherwise have to be stored for geologic periods of time. The production of 14 MeV neutrons is based on existing fusion technologies at different research institutions in several countries around the world. At the present time this technology is used to produce 14 MeV neutrons in JET. More development work will be required, however, to bring fusion technology to the level where it can be used for actinide burning on an industrial scale. The workshop concluded that the potential

IPHE Infrastructure Workshop Proceedings

Energy Technology Data Exchange (ETDEWEB)

None

2010-02-01

This proceedings contains information from the IPHE Infrastructure Workshop, a two-day interactive workshop held on February 25-26, 2010, to explore the market implementation needs for hydrogen fueling station development.

Applications of ion beam analysis workshop. Workshop handbook

International Nuclear Information System (INIS)

1995-01-01

A workshop on applications of ion beam analysis was held at ANSTO, immediate prior to the IBMM-95 Conference in Canberra. It aims was to review developments and current status on use of ion beams for analysis, emphasizing the following aspects: fundamental ion beam research and secondary effects of ion beams; material sciences, geological, life sciences, environmental and industrial applications; computing codes for use in accelerator research; high energy heavy ion scattering and recoil; recent technological development using ion beams. The handbook contains the workshop's program, 29 abstracts and a list of participants

Summer 1994 Computational Science Workshop. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

This report documents the work performed by the University of New Mexico Principal Investigators and Research Assistants while hosting the highly successful Summer 1994 Computational Sciences Workshop in Albuquerque on August 6--11, 1994. Included in this report is a final budget for the workshop, along with a summary of the participants` evaluation of the workshop. The workshop proceeding have been delivered under separate cover. In order to assist in the organization of future workshops, we have also included in this report detailed documentation of the pre- and post-workshop activities associated with this contract. Specifically, we have included a section that documents the advertising performed, along with the manner in which applications were handled. A complete list of the workshop participants in this section. Sample letters that were generated while dealing with various commercial entities and departments at the University are also included in a section dealing with workshop logistics. Finally, we have included a section in this report that deals with suggestions for future workshops.

Subatomic Physics and Cosmology Laboratory - LPSC Grenoble. Activity report 2010-2011

International Nuclear Information System (INIS)

Brissot, Roger; Bechu, Stephane; Boutherin, Bernard; Derome, Laurent; Deslorieux, Colette; Gallin-Martel, Marie-Laure; Kox, Serge; Kraml, Sabine; Lamy, Thierry; Lleres, Annick; Meplan, Olivier; Real, Jean-Sebastien; Sortais, Pascal; Vernay, Emmanuelle; Favro, Christian

2012-03-01

The Grenoble Subatomic Physics and Cosmology Laboratory - LPSC aims to improve our knowledge about the most elementary particles and about the forces that govern their interactions. It helps to broaden our understanding of the universe, its structure and its evolution. The LPSC is a Mixed Teaching and Research Unit, affiliated to the National Nuclear and Particle Physics Institute (IN2P3), the National Institute of Universe Sciences (INSU) and the National Institute of Engineering Sciences and Systems (INSIS) from the National Centre for Scientific Research (CNRS), as well as to the Joseph Fourier University and the Grenoble National Polytechnique Institute. The LPSC also plays a significant role at the national level and is involved in several international scientific and technical projects. Fundamental research is the driving force of LPSC activities. Among the themes studied at the LPSC, some are focused on the greatest unsolved mysteries of the universe, e.g. the unification of forces, the origin of the mass of particles, the origin of the matter-antimatter asymmetry in the universe and the search for dark matter and energy. Research starts at the scales of the nuclei of atoms and even much smaller, where quantum and relativistic physics laws prevail. The goal here is to understand the characteristics of the most elementary building blocks of matter and their interactions, to study the limits of existence of atoms and to discover new states of nuclear matter, such as the quark-gluon plasma. Research also extends towards the infinitely large; the goal here is to understand the origin of the structures of the universe and the cosmic phenomena that take place, and to understand the characteristics of the very first stages of the universe, just after the Big Bang. The branches of physics at these two extremes are actually closely linked. Infinitely small-scale physics plays an essential role in the first moments of the universe. Particle physics and cosmology both

Subatomic Physics and Cosmology Laboratory - LPSC Grenoble. Activity report 2012-2013

International Nuclear Information System (INIS)

Rebreyend, Dominique; Bondoux, Dominique; Chabod, Sebastien; Clement, Benoit; De Conto, Jean-Marie; Delorieux, Colette; Derome, Laurent; Furget, Christophe; Kox, Serge; Lacoste, Ana; Montanet, Francois; Rossetto, Olivier; Smith, Christopher; Vernay, Emmanuelle; Favro, Christian

2014-03-01

The Grenoble Subatomic Physics and Cosmology Laboratory - LPSC aims to improve our knowledge about the most elementary particles and about the forces that govern their interactions. It helps to broaden our understanding of the universe, its structure and its evolution. The LPSC is a Mixed Teaching and Research Unit, affiliated to the National Nuclear and Particle Physics Institute (IN2P3), the National Institute of Universe Sciences (INSU) and the National Institute of Engineering Sciences and Systems (INSIS) from the National Centre for Scientific Research (CNRS), as well as to the Joseph Fourier University and the Grenoble National Polytechnique Institute. The LPSC also plays a significant role at the national level and is involved in several international scientific and technical projects. Fundamental research is the driving force of LPSC activities. Among the themes studied at the LPSC, some are focused on the greatest unsolved mysteries of the universe, e.g. the unification of forces, the origin of the mass of particles, the origin of the matter-antimatter asymmetry in the universe and the search for dark matter and energy. Research starts at the scales of the nuclei of atoms and even much smaller, where quantum and relativistic physics laws prevail. The goal here is to understand the characteristics of the most elementary building blocks of matter and their interactions, to study the limits of existence of atoms and to discover new states of nuclear matter, such as the quark-gluon plasma. Research also extends towards the infinitely large; the goal here is to understand the origin of the structures of the universe and the cosmic phenomena that take place, and to understand the characteristics of the very first stages of the universe, just after the Big Bang. The branches of physics at these two extremes are actually closely linked. Infinitely small-scale physics plays an essential role in the first moments of the universe. Particle physics and cosmology both

Vulcano Workshop 2016

CERN Document Server

Mannocchi, G.; Morselli, A.; Trinchero, G.

2016-01-01

We announce the XVI Vulcano Workshop, which will be held from May 22nd to May 28th, 2016 in the Vulcano Island (Sicily, Italy). As in the past editions, the workshop will aim to gather people from High Energy Astrophysics and Particle Physics to discuss the most recent highlights in these fields. The workshop will cover the following topics: Astrophysics/Cosmology, Astrophysics/Gravity, Dark Matter, Particle Physics, Cosmic Rays, Gamma/Neutrino Astronomy, Neutrinos and Future Prospects. The scientific program will include several 30-minute review talks, to introduce the current problems, and 20-minute talks, giving new experimental and theoretical results. The participation is by invitation and limited to 80 people.

CEBAF/SURA 1985 Summer Workshop

International Nuclear Information System (INIS)

Crannel, H.

1985-12-01

The 1985 Summer Workshop began a new phase of planning for the experimental program at CEBAF. One goal of the Workshop was to define and describe options for equipping the CEBAF and stations with experimental equipment. Starting with an initial list of options which grew out of discussions during the Winter of 1984 and the Spring of 1985, the five working groups met during the Workshop and developed their final reports, included in these proceedings. The program of the Workshop consisted of invited talks on both theoretical and experimental topics, and working group meetings. The five working groups, include: Magnetic Spectrometers; Large Acceptance Detectors and Low Intensity Beams; Internal Targets; Positrons; Theory. These proceedings begin with an overview of CEBAF, and a report on progress made by the Magnetic Spectrometer and Internal Target Working Groups prior to the Workshop. The next part contains the invited talks, presented in the order which they were given during the week. The final reports of the five working groups follow this, and the proceedings conclude with papers contributed to the Workshop

N Reactor Lessons Learned workshop

International Nuclear Information System (INIS)

Heaberlin, S.W.

1993-07-01

This report describes a workshop designed to introduce participants to a process, or model, for adapting LWR Safety Standards and Analysis Methods for use on rector designs significantly different than LWR. The focus of the workshop is on the ''Lessons Learned'' from the multi-year experience in the operation of N Reactor and the efforts to adapt the safety standards developed for commercial light water reactors to a graphite moderated, water cooled, channel type reactor. It must be recognized that the objective of the workshop is to introduce the participants to the operation of a non-LWR in a LWR regulatory world. The total scope of this topic would take weeks to provide a through overview. The objective of this workshop is to provide an introduction and hopefully establish a means to develop a longer term dialogue for technical exchange. This report provides outline of the workshop, a proposed schedule of the workshop, and a description of the tasks will be required to achieve successful completion of the project

Les Cabinets de curiosités dauphinois dans les origines scientifiques du Muséum d'histoire naturelle de Grenoble (XVIII e -XIX e siècles)

OpenAIRE

Rochas , Joëlle

2008-01-01

Les actes du colloque de Poitiers concernant les cabinets de curiosités seront déposés sur le site web www.curiositas.org, site européen dédié aux cabinets de curiosités (Université de Poitiers).; Le Cabinet d'histoire naturelle de Grenoble, ancêtre du Muséum actuel, a été créé en 1773. Un premier historique de la fin du XVIIIe siècle mentionne les trois principaux cabinets d'où il était issu : un cabinet dauphinois - celui des Antonins - et deux cabinets grenoblois - celui du négociant greno...

GRAN SASSO/GRENOBLE: Artificial neutrino source confirms solar neutrino result

International Nuclear Information System (INIS)

Anon.

1995-01-01

In 1992, the Gallex experiment announced the first observation of the neutrinos produced in the primary proton-proton fusion reaction in the core of the Sun, reaction at the origin of the energy production by our star (September 1992, page 1). The Gallex team stressed that the observed neutrino flux was only about two-thirds of the predicted level, confirming the deficit observed by the two pioneering experiments, Ray Davis' chlorine-based detector in the USA and the Kamiokande study in Japan (which are only sensitive to neutrinos from subsidiary solar fusion processes). This deficit demands explanation, and could considerably modify our understanding of how stars shine and/or of neutrino physics. But before drawing conclusions, the Gallex result had to be checked. Gallex, installed in the Italian Gran Sasso underground Laboratory, is a radiochemical experiment using neutrino interactions to transform gallium-71 into germanium-71. The latter is radioactive and decays with a half-life of 11.4 days. Counting the germanium-71 atoms extracted from the target tank measures the neutrino flux to which the detector is exposed. Neutrinos are famous for their reluctance to interact. 65 billion per square centimetre per second on the surface of the Earth produce only one germanium-71 atom in the Gallex target containing 30 tons of gallium. This is at the limit of homeopathy (extracting few atoms of germanium-71 from a solution containing 10 30 atoms) and needs careful checking. Since it is not possible to switch off the Sun, the only recourse was to build an artificial neutrino source more powerful than the Sun as a benchmark. This was done last summer. Last May, 36 kilograms of chromium grains were placed in the Siloe reactor of the French Commissariat à l'énergie atomique, Grenoble. The chromium had been previously enriched to 40% chromium-50 by the Kurchatov Institute in Moscow (natural chromium contains only 4.5% chromium-50). A dedicated core was built for

Experimental system for high resolution X-ray transmission radiography

Czech Academy of Sciences Publication Activity Database

Jakůbek, J.; Holý, T.; Jakůbek, M.; Vavřík, Daniel; Vykydal, Z.

Volume 563, č. 1 (2006), s. 278-281 ISSN 0168-9002. [Intern. Workshop on Radiation Imaging Detectors /7./. Grenoble, 04.07.2005-07.07.2005] R&D Projects: GA MŠk(CZ) 1P04LA211; GA ČR(CZ) GA106/04/0567 Institutional research plan: CEZ:AV0Z20710524 Keywords : digital radiography * beam hardening * mikroradiography * roentgenogram quality Subject RIV: JB - Sensors, Measurment, Regulation Impact factor: 1.185, year: 2006

Report of the Orientation Workshop

DEFF Research Database (Denmark)

Nunez, Heilyn Camacho; Buus, Lillian; Ogange, Betty

2014-01-01

This Orientation Workshops is part of MAAGART project. The workshop is divided in three parts: 1) pre-Orientation Workshop stage, 2) Face-to-Face stage and 3) post-Orientation stage. Pre and post stages will be developed online. All the activities will take place in a virtual learning environment...... created for this purpose. Participants will receive all the information about how to access the virtual learning environment (Moodle) prior to the pre-orientation workshop. In this report we cover only the two first stages. Jørgen Bang, as a part of the Community of Practice activity, will be facilitating...

Reports on the AAAI 1999 Workshop Program

OpenAIRE

Drabble, Brian; Chaudron, Laurent; Tessier, Catherine; Abu-Hakima, Sue; Willmott, Steven; Austin, Jim; Faltings, Boi; Freuder, Eugene C.; Friedrich, Gerhard; Freitas, Alex A.; Cortes, U.; Sanchez-Marre, M.; Aha, David W.; Becerra-Fernandez, Irma; Munoz-Avila, Hector

2000-01-01

The AAAI-99 Workshop Program (a part of the sixteenth national conference on artificial intelligence) was held in Orlando, Florida. The program included 16 workshops covering a wide range of topics in AI. Each workshop was limited to approximately 25 to 50 participants. Participation was by invitation from the workshop organizers. The workshops were Agent-Based Systems in the Business Context, Agents' Conflicts, Artificial Intelligence for Distributed Information Networking, Artificial Intell...

PV radiometrics workshop proceedings

Energy Technology Data Exchange (ETDEWEB)

Myers, D.R.

1995-09-01

This report documents presentations and discussions held at the Photovoltaics Radiometeric Measurements Workshop conducted at Vail, Colorado, on July 24 and 25, 1995. The workshop was sponsored and financed by the Photovoltaic Module and Systems Performance and Engineering Project managed by Richard DeBlasio, Principal Investigator. That project is a component of the National Renewable Energy Laboratory (NREL) Photovoltaic Research and Development Program, conducted by NREL for the US Department of Energy, through the NREL Photovoltaic Engineering and Applications Branch, managed by Roland Hulstrom. Separate abstracts have been prepared for articles from this workshop.

North Region ROW tool implementation workshop.

Science.gov (United States)

2010-08-02

Welcome to the North Region ROW Tool Workshop. This workshop is funded under an implementation project sponsored by TxDOTs Research & Technology Implementation Office (RTI). This is the second of four regional workshops being planned for this summ...

Dynamic defense workshop :

Energy Technology Data Exchange (ETDEWEB)

Crosby, Sean Michael; Doak, Justin E.; Haas, Jason Juedes.; Helinski, Ryan; Lamb, Christopher C.

2013-02-01

On September 5th and 6th, 2012, the Dynamic Defense Workshop: From Research to Practice brought together researchers from academia, industry, and Sandia with the goals of increasing collaboration between Sandia National Laboratories and external organizations, de ning and un- derstanding dynamic, or moving target, defense concepts and directions, and gaining a greater understanding of the state of the art for dynamic defense. Through the workshop, we broadened and re ned our de nition and understanding, identi ed new approaches to inherent challenges, and de ned principles of dynamic defense. Half of the workshop was devoted to presentations of current state-of-the-art work. Presentation topics included areas such as the failure of current defenses, threats, techniques, goals of dynamic defense, theory, foundations of dynamic defense, future directions and open research questions related to dynamic defense. The remainder of the workshop was discussion, which was broken down into sessions on de ning challenges, applications to host or mobile environments, applications to enterprise network environments, exploring research and operational taxonomies, and determining how to apply scienti c rigor to and investigating the eld of dynamic defense.

Summer workshops for high-school science teachers

International Nuclear Information System (INIS)

Young, H.H.; Kohl, J.

1975-01-01

A total of 52 summer workshops attended by over 1700 high-school science teachers have been given by 27 universities in the period of 1971 to 1974. These workshops are funded by ERDA to provide factual material through educational channels so that the public could obtain an informed perspective of the role of nuclear energy as an electrical power source. The workshops have included lectures, panel discussions, laboratories, and field trips, and have emphasized providing teachers with materials for use in their classrooms. Actual use of workshop material has been monitored through workshop reports, meetings, and visits. Participants have used their workshop experience for classroom presentations, talks to the public, and for assembly programs. The material developed and the experience of presenting it has proved valuable for the nuclear engineering faculty members giving the workshops. They have used their experience in other courses, for public lectures, and for other workshops. And they have gained personal experience in methods of dealing with the nuclear power controversy. A review of these workshops indicates that they offer at a reasonable cost a productive method of presenting factual information on the various solutions to the complex electrical generation problem

Opening Session - Introductory remarks for Workshop on Accident Tolerant Fuel. OECD/NEA Workshop on Accident Tolerant Fuels, Workshop Expectations

International Nuclear Information System (INIS)

Dujardin, Thierry; Gulliford, Jim; Massara, Simone; Pasamehmetoglu, K.

2013-01-01

The workshop opened with the welcome address from Th. Dujardin (OECD/NEA), NEA Deputy Director. Th. Dujardin recalled the integrated NEA response to the dramatic Fukushima-Daiichi events performed by three standing technical committees: the Committee on Nuclear Regulatory Activities (CNRA), the Committee on the Safety of Nuclear Installations (CSNI) and the Committee on Radiation Protection and Public Health (CRPPH). J. Gulliford (OECD/NEA) placed the workshop in the context of the activities of the Nuclear Science Committee within the framework of the NEA response to Fukushima- Daiichi. K. Pasamehmetoglu (INL, US) explained the main goals of the workshop oriented towards defining requirements for selection among various options during the feasibility phase of the development process, and not towards identifying and proposing design solutions

Reports on the 2015 AAAI Workshop Program

OpenAIRE

Albrecht, Stefano V.; Beck, J. Christopher; Buckeridge, David L.; Botea, Adi; Caragea, Cornelia; Chi, Chi-hung; Damoulas, Theodoros; Dilkina, Bistra; Eaton, Eric; Fazli, Pooyan; Ganzfried, Sam; Giles, C. Lee; Guillet, Sébastian; Holte, Robert; Hutter, Frank

2015-01-01

AAAI's 2015 Workshop Program was held Sunday and Monday, January 25–26, 2015 at the Hyatt Regency Austin Hotel in Austion, Texas, USA. The AAAI-15 workshop program included 15 workshops covering a wide range of topics in artificial intelligence. Most workshops were held on a single day. The titles of the workshops included AI and Ethics, AI for Cities, AI for Transportation: Advice, Interactivity and Actor Modeling, Algorithm Configuration, Artificial Intelligence Applied to Assistive Technol...

NKS Workshop on Radioanalytical Chemistry - Final report

DEFF Research Database (Denmark)

The NKS-B workshop on radioanalytical chemistry was held 2-6th Sept 2013 at Risø, Denmark. There were a total of 49 persons participating in the workshop, including 32 young participants and 15 lecturers. The work-shop started with 3 days of lab practice followed by 1.5 day’s lectures by the expe......The NKS-B workshop on radioanalytical chemistry was held 2-6th Sept 2013 at Risø, Denmark. There were a total of 49 persons participating in the workshop, including 32 young participants and 15 lecturers. The work-shop started with 3 days of lab practice followed by 1.5 day’s lectures...

2017 Marine Hydrokinetic Instrumentation Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Driscoll, Frederick R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Mauer, Erik [U.S. Department of Energy; Rieks, Jeff [Allegheny Science and Technologies

2018-03-06

The third Marine Hydrokinetic Instrumentation Workshop was held at Florida Atlantic University's Sea Tech Campus in Dania Beach, Florida, from February 28 to March 1, 2017. The workshop brought together 37 experts in marine energy measurement, testing, and technology development to present and discuss the instrumentation and data-processing needs of the marine energy industry. The workshop was comprised of a plenary session followed by two focused breakout sessions. The half-day plenary session reviewed findings from prior instrumentation workshops, presented research activities that aim to fill previously identified gaps, and had industry experts present the state of the marine energy measurement technologies. This report provides further detail on the workshop, objectives, and findings.

Physics Analysis Tools Workshop Report

CERN Multimedia

Assamagan, K A

A Physics Analysis Tools (PAT) workshop was held at the University of Tokyo in Tokyo Japan on May 15-19, 2006. Unlike the previous ones, this workshop brought together the core PAT developers and ATLAS users. The workshop was attended by 69 people from various institutions: Australia 5 Canada 1 China 6 CERN 4 Europe 7 Japan 32 Taiwan 3 USA 11 The agenda consisted of a 2-day tutorial for users, a 0.5-day user feedback discussion session between users and developers, and a 2-day core PAT workshop devoted to issues in Physics Analysis Tools activities. The tutorial, attended by users and developers, covered the following grounds: Event Selection with the TAG Event Selection Using the Athena-Aware NTuple Event Display Interactive Analysis within ATHENA Distributed Analysis Monte Carlo Truth Tools Trigger-Aware Analysis Event View By many accounts, the tutorial was useful. This workshop was the first time that the ATLAS Asia-Pacific community (Taiwan, Japan, China and Australia) go...

Systems Engineering 2010 Workshop | Wind | NREL

Science.gov (United States)

0 Workshop Systems Engineering 2010 Workshop The 1st NREL Wind Energy Systems Engineering Workshop of the system engineering model. In the middle of the model is optimization, metric tracking &M model, capital cost model, and balance of station. Systems engineering represents a holistic

SPLASH'13 workshops summary

DEFF Research Database (Denmark)

Balzer, S.; Schultz, U. P.

2013-01-01

Following its long-standing tradition, SPLASH 2013 will host 19 high-quality workshops, allowing their participants to meet and discuss research questions with peers, to mature new and exciting ideas, and to build up communities and start new collaborations. SPLASH workshops complement the main t...

6th International Microbeam Workshop

Energy Technology Data Exchange (ETDEWEB)

Dr Kevin M. Prise

2004-01-01

The extended abstracts which are submitted here present a summary of the proceedings of the 6th International Workshop/12th LH Gray Workshop: Microbeam Probes of Cellular Radiation Response, held at St. Catherine's College, University of Oxford, UK on March, 29th-31st, 2003. In 1993 the 4th LH Gray Workshop entitled ''Microbeam Probes of Cellular Radiation Response'' was held at the Gray Cancer Institute in Northwood. This was organized by Prof BD Michael, Dr M. Folkard and Dr KM Prise and brought together 40 participants interested in developing and applying new microbeam technology to problems in radiation biology (1). The workshop was an undoubted success and has spawned a series of subsequent workshops every two years. In the past, these workshops have been highly successful in bringing together groups interested in developing and applying micro-irradiation techniques to the study of cell and tissue damage by ionizing radiations. Following the first microbeam workshop, there has been a rapid growth in the number of centres developing radiobiology microbeams, or planning to do so and there are currently 15-20 worldwide. Much of the recent research using microbeams has used them to study low-dose effects and ''non-targeted'' responses such bystander effects, genomic instability and adaptive responses. The goal of the 6th workshop was to build on our knowledge of the development of microbeam approaches and the application to radiation biology in the future with the meeting stretching over a 3 day period. Over 80 participants reviewed the current state of radiobiology microbeam research worldwide and reported on new technological developments both in the fields of physics and biology.

Nuclear Innovation Workshops Report

Energy Technology Data Exchange (ETDEWEB)

Jackson, John Howard [Idaho National Lab. (INL), Idaho Falls, ID (United States); Allen, Todd Randall [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hildebrandt, Philip Clay [Idaho National Lab. (INL), Idaho Falls, ID (United States); Baker, Suzanne Hobbs [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-09-01

The Nuclear Innovation Workshops were held at six locations across the United States on March 3-5, 2015. The data collected during these workshops has been analyzed and sorted to bring out consistent themes toward enhancing innovation in nuclear energy. These themes include development of a test bed and demonstration platform, improved regulatory processes, improved communications, and increased public-private partnerships. This report contains a discussion of the workshops and resulting themes. Actionable steps are suggested at the end of the report. This revision has a small amount of the data in Appendix C removed in order to avoid potential confusion.

IFPA Meeting 2013 Workshop Report II

DEFF Research Database (Denmark)

Ackerman, W E; Adamson, L; Carter, Anthony Michael

2013-01-01

Workshops are an important part of the IFPA annual meeting as they allow for discussion of specialized topics. At the IFPA meeting 2013 twelve themed workshops were presented, five of which are summarized in this report. These workshops related to various aspects of placental biology but collecti...

IFPA meeting 2012 workshop report I

DEFF Research Database (Denmark)

Ackerman, W E; Carter, Anthony Michael; De Mestre, A M

2013-01-01

Workshops are an important part of the IFPA annual meeting as they allow for discussion of specialized topics. At IFPA meeting 2012 there were twelve themed workshops, three of which are summarized in this report. These workshops related to various aspects of placental biology but collectively...

[Towards a pedagogical e-learning approach to improve preparation for medical school curriculum in Grenoble: results over the 10 last years].

Science.gov (United States)

Gillois, Pierre; Pagonis, Daniel; Vuillez, Jean-Philippe; Bosson, Jean-Luc; Romanet, Jean-Paul

2013-02-01

Before 2005, at Grenoble, the teaching of the first year of medicine satisfied neither the students, nor the teachers anxious to exempt a correctly targeted effective teaching. By 2006, the Grenoble-native teaching method was reformed in-depth with the introduction of information and communication technology (ICT) in education. Each sequence was over 4 weeks connecting: self- learning using multi-media resources, questions submitted online, meetings with teaching staff for interactive question-answer sessions in the presence of the teacher,) tutorials animated by older students for Multiple Choice Question (MCQ) training in preparation for the exams. The whole health formation was structured in 12 cycles of this same structured sequence. Since 2010, this method was extended from the faculty of medicine to the faculty of pharmacy and maieutic. Each year, more than 1600 students, 40 teachers and 140 tutors are concerned. The ICT laboratory was responsible for the production of the multi-media support, of the management of the questions online, the collection and the treatment of the evaluations of the lesson by the students. It also took part in the preparation of the MCQ trainings and after each sequence, delivered to students their personal ranking. Staffs between teachers and students are organized for the 12 cycles. The teachers' and students' opinions were analyzed to evaluate the reforms and allow teaching methods to be adapted accordingly. The expressed satisfaction' rate vary from 85% with more than 91% by students and teachers. The intensive use of new information and communication technologies is well accepted, by both sides: teachers and students. After each tutorial, students had their results and their rank, which are linked with the contest result. The mean of the 12 notes obtained during the tutorials is correlated with the note with the contest (R of Spearman=0.75). Student profiles at registration and success in the exams following the reform are

Evaluation of the Career Planning Workshop

Energy Technology Data Exchange (ETDEWEB)

Gibson, L.W.

1986-04-01

People who apply to participate in this workshop appear to be genuinely interested in personal development. Participants reported that they were not very happy with several aspects of their jobs prior to the workshop. Predominant personality characteristics of the participants were shyness, communication anxiety, reserved style, cautiousness, moodiness, energetic, hard-working and analytical minded. Participants were favorably impressed with the workshop. One of the most potent ways that the workshop impacts participants is through improved self understanding and enhanced self-esteem. Many people did change jobs following the workshop. Of those who did not actually change jobs, almost half reported that they had modified their present job to achieve a better person-job fit. Participants did not report many changes in their routine behavior although they kept the supervisor more informed of their job activity. Current job satisfaction is good among the participants. Although the workshop is fairly expensive to provide, the long range benefits in terms of enhanced levels of performance far outweigh the costs.

1998 federal technical standards workshop: Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-10-01

The theme for the 1998 workshop was Standards Management -- A World of Change and Opportunities. The workshop`s goal was to further the implementation of the National Technology Transfer and Advancement Act of 1995 (Public Law 104-113) through the sharing of standards management success stories, lessons learned, and emerging initiatives within the Executive Branch of the Federal Government. The target audience for this workshop included agency/department and contractor personnel and representatives of standards developing organizations that either used technical standards in their work for the Federal Government of participated in standards writing/management activities in support of the missions and programs of Federal agencies/departments. As with previous standards workshops sponsored by the DOE, views on the technical subject areas under the workshop theme were solicited from and provided by agency Standards Executives and standards program managers, voluntary standards organizations, and the private sector. This report includes vugraphs of the presentations.

ISEE-magnetopause observations - workshop results

International Nuclear Information System (INIS)

Paschmann, G.

1982-01-01

A brief history of ISEE magnetopause workshops held during 1977-1981 is presented, and an assessment of the activity of these workshops is made. Workshop results are surveyed, with attention given to magnetopause thickness and speed, large-scale reconnection, small-scale reconnection, magnetic field topology, plasma waves, boundary layer structure, surface waves, plasma origin, and the relationship between magnetopause and particle boundaries. Finally, a few topics that require particular attention in the future are mentioned

IFPA meeting 2010 workshop report I

DEFF Research Database (Denmark)

Abad, C.; Antczak, D.F.; Carvalho, J.

2011-01-01

Workshops are an important part of the IFPA annual meeting. At IFPA Meeting 2010 there were twelve themed workshops, six of which are summarized in this report. 1. The immunology workshop focused on normal and pathological functions of the maternal immune system in pregnancy. 2. The transport wor...

Silicon Quantum Dots for Quantum Information Processing

Science.gov (United States)

2013-11-01

S. Lai, C. Tahan, A. Morello and A. S. Dzurak, Electron Spin lifetimes in multi-valley sil- icon quantum dots, S3NANO Winter School Few spin solid...lifetimes in multi-valley sil- icon quantum dots, International Workshop on Silicon Quantum Electronics, Grenoble, France, February 2012 (Poster). C...typically plunger gates), PMMA A5 is spun at 5000 rpm for 30 seconds, resulting in a 280 nm resist thickness. The resists are baked for 90 seconds at 180

Summary and report on four national environmental workshops

Energy Technology Data Exchange (ETDEWEB)

House, Peter W.

1980-07-01

Individual abstracts were prepared for the summaries of four workshops held during the last two years: (1) Integrated Assessment for Energy Related Environmental Standards Workshop - Berkeley, California, November 1978; (2) National Ecological Assessment Workshop - Savannah, Georgia, January 1979; (3) National/Regional Modelling Workshop - Reston, Virginia, May 1979; (4) Groundwater Workshop - Albuquerque, New Mexico, January 1980. (JGB)

Workshop of medical physics

International Nuclear Information System (INIS)

1988-01-01

This event was held in San Carlos de Bariloche, Argentine Republic from 14 th. through 18 th. November, 1988. A great part of the physicians in the area of medical physics participated in this workshop. This volume includes the papers presented at this Workshop of Medical Physics [es

Workshops on Writing Science

Indian Academy of Sciences (India)

2017-09-30

Sep 30, 2017 ... hands-on practice, feedback, mentoring and highly interactive sessions. The focus will be on work done as individuals and in teams. Maximum number of participants for the workshop is limited. The workshop is compulso- rily residential. Boarding and lodging free for selected candidates. Re-imbursement ...

One-year study of polycyclic aromatic compounds at an urban site in Grenoble (France): Seasonal variations, gas/particle partitioning and cancer risk estimation

Energy Technology Data Exchange (ETDEWEB)

Tomaz, Sophie [Institut National de l' Environnement industriel et des RISques (INERIS), Parc Technologique Alata BP2, 60550 Verneuil en Halatte (France); CNRS, EPOC, UMR 5805, F-33405 Talence Cedex (France); Université de Bordeaux, EPOC, UMR 5805, F-33405, Talence Cedex (France); Shahpoury, Pourya [Max Planck Institute for Chemistry, Multiphase Chemistry Department, Mainz (Germany); Jaffrezo, Jean-Luc [Laboratoire de Glaciologie et Géophysiques de l' Environnement (LGGE), Université de Grenoble-Alpes/CNRS, Grenoble (France); Lammel, Gerhard [Max Planck Institute for Chemistry, Multiphase Chemistry Department, Mainz (Germany); Masaryk University, Research Centre for Toxic Compounds in the Environment, Brno (Czech Republic); Perraudin, Emilie; Villenave, Eric [CNRS, EPOC, UMR 5805, F-33405 Talence Cedex (France); Université de Bordeaux, EPOC, UMR 5805, F-33405, Talence Cedex (France); Albinet, Alexandre, E-mail: alexandre.albinet@gmail.com [Institut National de l' Environnement industriel et des RISques (INERIS), Parc Technologique Alata BP2, 60550 Verneuil en Halatte (France)

2016-09-15

21 PAHs, 27 oxy-PAHs and 32 nitro-PAHs were measured every third day over a year in both gaseous (G) and particulate PM{sub 10} (P) phases in ambient air of Grenoble (France). Mean total concentrations (G + P) of PAHs and oxy-PAHs were in the same range and about 10 ng m{sup −3}. Nitro-PAHs were 50 to 100 times less concentrated averaging 100 pg m{sup −3}. Polycyclic aromatic compound (PAC) concentrations were 5 to 7 times higher in “cold” period (October to March) than in “warm” period (April to September). Seasonal variations may be explained by higher primary emissions from residential heating, especially biomass burning in “cold” season. Meteorological conditions and influence of the geomorphology around Grenoble, with the formation of thermal inversion layers leading to the stagnation of pollutants, were additional key parameters. Maximum individual PAC concentrations were observed during two PM{sub 10} pollution events in December and February–March. Chemical processes and secondary formation of oxy- and nitro-PAH were probably enhanced by the accumulation of the pollutants during these events. PAC gas/particle partitioning depended on compound molecular weight and vapour pressure. Gas/particle partitioning of oxy- and nitro-PAHs were evaluated using a multi-phase poly-parameter linear free energy relationship model. The PAC cancer risk was assessed using toxic equivalency factors available in the literature (19 PAHs, 10 nitro-PAHs and 1 oxy-PAH). Overall, particle-bound PACs contributed about 76% of the cancer risk. While PAHs accounted for most of the total PAC cancer risk, oxy- and nitro-PAHs could account for up to 24%. The risk quantification across substance classes is limited by toxicological data availability. - Highlights: • The most comprehensive study about PAH, nitro- and oxy-PAH in ambient air. • 80 species studied in gaseous and particle phases over a year at French urban site. • Concentration seasonality governed by

Review of the SLAC and Les Houches workshops

International Nuclear Information System (INIS)

Prescott, C.Y.

1994-12-01

Polarized Electron Source workshops have been held at varying intervals, beginning in 1983 when Charles Sinclair convened the first at SLAC. Since that time, three workshops were held in conjunction with the International Spin Symposia and two at other occasions. The increasing importance of polarized electron beams at accelerators has stimulated interest in these workshops. Two workshops have been held since the last International Spin Symposium in Nagoya. In 1993, a workshop was held at SLAC, and in 1994 at Les Houches, a polarized electron beam session was held as part of a polarized beam and targets workshop. This report summarizes highlights from the latter two workshops

WALLTURB International Workshop

CERN Document Server

Jimenez, Javier; Marusic, Ivan

2011-01-01

This book brings together selected contributions from the WALLTURB workshop on ”Understanding and modelling of wall turbulence” held in Lille, France, on April 21st to 23rd 2009. This workshop was organized by the WALLTURB consortium, in order to present to the relevant scientific community the main results of the project and to stimulate scientific discussions around the subject of wall turbulence. The workshop reviewed the recent progress in theoretical, experimental and numerical approaches to wall turbulence. The problems of zero pressure gradient, adverse pressure gradient and separating turbulent boundary layers were addressed in detail with the three approaches, using the most advanced tools. This book is a milestone in the research field, thanks to the high level of the invited speakers and the involvement of the contributors and a testimony of the achievement of the WALLTURB project.

Boiling water reactor simulator. Workshop material

International Nuclear Information System (INIS)

2003-01-01

The International Atomic Energy Agency (IAEA) has established an activity in nuclear reactor simulation computer programs to assist its Member States in education. The objective is to provide, for a variety of advanced reactor types, insight and practice in their operational characteristics and their response to perturbations and accident situations. To achieve this, the IAEA arranges for the development and distribution of simulation programs and workshop material and sponsors workshops. The workshops are in two parts: techniques and tools for reactor simulator development; and the use of reactor simulators in education. Workshop material for the first part is covered in the IAEA publication: Training Course Series No. 12, 'Reactor Simulator Development' (2001). Course material for workshops using a WWER- 1000 simulator from the Moscow Engineering and Physics Institute, Russian Federation is presented in the IAEA publication: Training Course Series No. 21 'WWER-1000 Reactor Simulator' (2002). Course material for workshops using a pressurized water reactor (PWR) simulator developed by Cassiopeia Technologies Incorporated, Canada, is presented in the IAEA publication: Training Course Series No. 22 'Pressurized Water Reactor Simulator' (2003). This report consists of course material for workshops using a boiling water reactor (BWR) simulator. Cassiopeia Technologies Incorporated, developed the simulator and prepared this report for the IAEA

Warehouse Sanitation Workshop Handbook.

Science.gov (United States)

Food and Drug Administration (DHHS/PHS), Washington, DC.

This workshop handbook contains information and reference materials on proper food warehouse sanitation. The materials have been used at Food and Drug Administration (FDA) food warehouse sanitation workshops, and are selected by the FDA for use by food warehouse operators and for training warehouse sanitation employees. The handbook is divided…

Progress Report of the Grenoble Research Group (Part 2). January 1, 1978 to December 31, 1979

International Nuclear Information System (INIS)

1980-01-01

This report describes the activities of the Controlled Fusion Research Department of Grenoble in 1978-1979. Brief mention is made of various theoretical studies followed by descriptions of the applications of plasmas created by cyclotronic resonance of electrons. Several experiments relate to these applications: the production of D - negative ions, the Franco-Swedish project for a line of neutrals injectors based on the D - s, the production of a supersonic jet of cesium gas ('Apocalypse' experiment), the production of multicharged ions and the Micromafios source. The operation of the Petula Tokamak was progressively centred on the study of the technical and physical problems of heating at the lower hybrid frequency after being devoted, up to the beginning of 1978, to compression TTMP (Transit Time Magnetic Pumping) heating. The performance of this Tokamak has been improved by bringing in to service a 30 M watt power supply enabling a 3 Tesla toroidal field to be obtained. Several thousand collisions at B=27 k gauss were carried out for the hybrid heating study. Recently a premagnetization of the magnetic circuit enabled the length of current pulses to be brought to 200 ms. The activity of the Wega project team was dominated by the continuance of the LH (lower hybrid) heating experiments in the Stellarator configuration. The total diagnoses, data acquisition system, was adapted to the new configuration. Various contributions made it possible to establish a plan for the optimization of the parameters and to improve the techniques [fr

Subatomic Physics and Cosmology Laboratory - LPSC Grenoble. Activity report 2014-2015

International Nuclear Information System (INIS)

Bouly, Frederic; Combet, Celine; Gomez Martinez, Yolanda; Smith, Christopher; Dauvergne, Denis; Delorieux, Colette; Derome, Laurent; Furget, Christophe; Lacoste, Ana; Lamy, Thierry; Lamberterie, Pierre de; Ledroit, Fabienne; Lucotte, Arnaud; Macias Perez, Juan Francisco; Montanet, Francois; Rebreyend, Dominique; Sage, Christophe; Santos, Daniel; Simpson, Gary; Vernay, Emmanuelle; Favro, Christian

2016-06-01

The Grenoble Subatomic Physics and Cosmology Laboratory - LPSC aims to improve our knowledge about the most elementary particles and about the forces that govern their interactions. It helps to broaden our understanding of the universe, its structure and its evolution. The LPSC is a Mixed Teaching and Research Unit, affiliated to the National Nuclear and Particle Physics Institute (IN2P3), the National Institute of Universe Sciences (INSU) and the National Institute of Engineering Sciences and Systems (INSIS) from the National Centre for Scientific Research (CNRS), as well as to the Joseph Fourier University and the Grenoble National Polytechnique Institute. The LPSC also plays a significant role at the national level and is involved in several international scientific and technical projects. Fundamental research is the driving force of LPSC activities. Among the themes studied at the LPSC, some are focused on the greatest unsolved mysteries of the universe, e.g. the unification of forces, the origin of the mass of particles, the origin of the matter-antimatter asymmetry in the universe and the search for dark matter and energy. Research starts at the scales of the nuclei of atoms and even much smaller, where quantum and relativistic physics laws prevail. The goal here is to understand the characteristics of the most elementary building blocks of matter and their interactions, to study the limits of existence of atoms and to discover new states of nuclear matter, such as the quark-gluon plasma. Research also extends towards the infinitely large; the goal here is to understand the origin of the structures of the universe and the cosmic phenomena that take place, and to understand the characteristics of the very first stages of the universe, just after the Big Bang. The branches of physics at these two extremes are actually closely linked. Infinitely small-scale physics plays an essential role in the first moments of the universe. Particle physics and cosmology both

Academic excellence workshops in chemistry and physics

Science.gov (United States)

Mills, Susan Rose

In the mid-1970's, Uri Treisman, at the University of California, Berkeley, developed an academic excellence workshop program that had important successes in increasing minority student achievement and persistence in calculus. The present dissertation research is an in-depth study of chemistry and physics workshops at the California State Polytechnic University, Pomona. Data for the first, longitudinal component of this study were obtained by tracking to Spring 1998 all workshop minority students, i.e., Latino, African American, and Native American workshop students, a random sample of non-workshop minority students, and a random sample of non-targeted students, i.e., Anglo and Asian students, enrolled in first-quarter General Chemistry or Physics during specific quarters of 1992 or 1993. Data for the second component were obtained by administering questionnaires, conducting interviews, and observing science students during Fall, 1996. Workshop participation was a significant predictor of first-quarter course grade for minority students in both chemistry and physics, while verbal and mathematics Scholastic Aptitude Test (SAT) scores were not significant predictors of beginning course grade for minority science students. The lack of predictive ability of the SAT and the importance of workshop participation in minority students' beginning science course performance are results with important implications for educators and students. In comparing pre-college achievement measures for workshop and non-targeted students, non-targeted students' mathematics SAT scores were significantly higher than chemistry and physics workshop students' scores. Nonetheless, workshop participation "leveled the field" as workshop and non-targeted students performed similarly in beginning science courses. Positive impacts of workshop participation on achievement, persistence, efficiency, social integration, and self-confidence support the continued and expanded funding of workshop programs

2016 FACET-II Science Workshop Summary Report

Energy Technology Data Exchange (ETDEWEB)

Hogan, Mark J., ed.

2017-07-19

The second in a series of FACET-II Science Workshops was held at SLAC National Accelerator Laboratory on October 17-19, 2016 [1]. The workshop drew thirty-five participants from eighteen different institutions including CERN, DESY, Ecole Polytechnique, FNAL, JAI, LBNL, LLNL, Radiabeam, Radiasoft, SLAC, Stony Brook, Strathclyde, Tech-X, Tsinghua, UC Boulder, UCLA and UT Austin. The 2015 workshop [2, 3] helped prioritize research directions for FACET-II. The 2016 workshop was focused on understanding what improvements are needed at the facility to support the next generation of experiments. All presentations are linked to the workshop website as a permanent record.

New diffractometers at ILL Grenoble - the millennium program

International Nuclear Information System (INIS)

Hewat, A. W.

2000-01-01

Full text: New techniques for constructing detectors and monochromators are being used to build a number of new diffractometers at ILL Grenoble to provide an order of magnitude gain in efficiency, and higher resolution. Similar techniques might be applied at the new Australian reactor to provide world-class neutron instruments. These projects include a high resolution multi-detector powder diffractometer super-D2B, a modular microstrip detector for liquids and amorphous materials D4c, an array of 2D microstrip detectors for large molecular structures and fibre diffraction D19, a large high flux microstrip detector D20, a neutron image plate camera for structural and magnetic transitions T-LADI, and a dedicated neutron strain-scanner built with a large grant from the UK EPSRC. The super-D2B project will consist of 128 linear wire detectors behind an array of very fine Soeller collimators, which will provide a horizontal resolution of 5x10 -4 in d-spacing. Vertical resolution by charge division along the 300mm detector length will be used to correct for the curvature of the diffraction cones, greatly increasing the useful vertical acceptance angle. Prototype collimators and detectors have already been constructed. The new D4c detector is being installed in June 2000 on the liquids and amorphous materials diffractometer D4. It consists of a bank of 9 individual microstrip detectors covering a total of 160 degrees, with each detector containing 64 microstrip 'wires'. The complete diffraction pattern will be obtained with 2 positions of this detector bank, which is very efficient for short wavelength neutrons, and highly stable, as needed to measure small differences between amorphous materials using for example isotope contrast. The world's first microstrip powder diffractometer D20 is currently being re-built, and will be available again in October 2000. It consists of 1600 microstrip 'wires' in a single 160-degree chamber. The machine is so fast that it can follow

Iterative Prototyping of Strategy Implementation Workshop Design

DEFF Research Database (Denmark)

Kryger, Anders

2018-01-01

Purpose: The purpose of this paper is to demonstrate how a strategy implementation workshop design can be developed and tested while minimizing the time spent on developing the design. Design/methodology/approach: This multiple case study at a diesel engine company shows how iterative prototyping...... can be used to structure the design process of a strategy implementation workshop. Findings: Strategy implementation workshop design can be developed in resource-constrained environments through iterative prototyping of the workshop design. Each workshop iteration can generate value in its own right...... draw on his/her experience as well as add to his/her knowledge base. Originality/value: Introducing iterative prototyping in an organizational context can facilitate fast yet structured development of a rigorous workshop design. Strategy consultants are provided with empirical examples of how...

Li'l Red Schoolhouse workshops

Science.gov (United States)

1993-01-01

Education specialists at Stennis conduct staff development workshops for elementary and secondary teachers of math, science and technology and other subjects as well as specialized workshops conducted in the NASA Li'l Red Schoolhouse.

DESY: QCD workshop

International Nuclear Information System (INIS)

Ingelman, Gunnar

1994-01-01

The traditional annual DESY Theory Workshop highlights a topical theory sector. The most recent was under the motto 'Quantum Chromo-Dynamics' - QCD, the field theory of quarks and gluons. The organizers had arranged a programme covering most aspects of current QCD research. This time the workshop was followed by a topical meeting on 'QCD at HERA' to look at the electron-proton scattering experiments now in operation at DESY's new HERA collider

Physics and Astronomy New Faculty Workshops: 20 Years of Workshops and 2000 Faculty

Science.gov (United States)

Hilborn, Robert

Most college and university new faculty members start their teaching careers with almost no formal training in pedagogy. To address this issue, the American Association of Physics Teachers, the American Astronomical Society, and the American Physical Society have been offering since 1996 workshops for physics and astronomy new faculty members (and in recent years for experienced faculty members as well). The workshops introduce faculty members to a variety of interactive engagement teaching (IET) methods and the evidence for their effectiveness, embedded in a framework of general professional development. Currently the workshops engage about 50% of the new tenure-track hires in physics and astronomy. The workshops are quite successful in making the participants aware of IET methods and motivating them to implement them in their classes. However, about 1/3 of the participants stop using IET methods within a year or two. The faculty members cite (a) lack of time and energy to change, (b) content coverage concerns, and (c) difficulty getting students engaged as reasons for their discontinuance. To help overcome these barriers, we have introduced faculty online learning communities (FOLCs). The FOLCs provide peer support and advice through webinars and coaching from more experienced faculty members. Recommendations based on the workshops and the experiences of the participants can enhance the teaching effectiveness of future physics and astronomy faculty members. This work was supported in part by NSF Grant 1431638.

Establishing Ozone Critical Levels II. UNECE Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Karlsson, Per Erik; Sellden, Gun; Pleijel, Haakan [eds.

2003-06-01

This document is the final report from the workshop. It contains the overall summary of the conclusions from the workshop, the reports from the three working groups that were active during the workshop as well as all background papers presented at the workshop.

75 FR 28051 - Public Workshop: Pieces of Privacy

Science.gov (United States)

2010-05-19

... DEPARTMENT OF HOMELAND SECURITY Office of the Secretary Public Workshop: Pieces of Privacy AGENCY: Privacy Office, DHS. ACTION: Notice announcing public workshop. SUMMARY: The Department of Homeland Security Privacy Office will host a public workshop, ``Pieces of Privacy.'' DATES: The workshop will be...

ATLAS TRT 2002 Workshop

CERN Multimedia

Capeans, M.

Starting on 17th May, the ATLAS TRT 2002 Workshop was organised by Ken MacFarlane and his team at Hampton University, Virginia, USA. During a welcome break in the very dense workshop programme, the group enjoyed a half-day long boat trip along the waterways, offering a first-hand look at the history and heritage of this part of America. The attendance during the six-day workshop was about 50 people representing most of the collaborating institutes, although many Russian colleagues had stayed in their institutes to pursue the start-up of end-cap wheel production at PNPI and DUBNA. The meeting clearly showed that, during the year 2002, the TRT community is focusing on final design issues and module/wheel construction, while moving at the same time towards acceptance testing and integration, including the front-end electronics. The two main topics treated at the workshop were the preparation for beginning full production of the FE electronics, and the wire-joint problem that the US barrel colleagues have been fa...

Measurement Control Workshop Instructional Materials

International Nuclear Information System (INIS)

Gibbs, Philip; Crawford, Cary; McGinnis, Brent

2014-01-01

A workshop to teach the essential elements of an effective nuclear materials control and accountability (MC&A) programs are outlined, along with the modes of Instruction, and the roles and responsibilities of participants in the workshop.

Measurement control workshop instructional materials

Energy Technology Data Exchange (ETDEWEB)

Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Crawford, Cary [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McGinnis, Brent [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Insolves LLC, Piketon, OH (United States)

2014-04-01

A workshop to teach the essential elements of an effective nuclear materials control and accountability (MC&A) programs are outlined, along with the modes of Instruction, and the roles and responsibilities of participants in the workshop.

Indonesian students' participation in an interprofessional learning workshop.

Science.gov (United States)

Ernawati, Desak Ketut; Lee, Ya Ping; Hughes, Jeffery

2015-01-01

Interprofessional learning activities, such as workshops allow students to learn from, with and about each other. This study assessed the impact on Indonesian health students' attitudes towards interprofessional education (IPE) from participating in a workshop on medication safety. The students attended a two-day IPE workshop on medication safety. Thirty-five (48.6%) students completed pre-/post-workshop surveys using a modified Readiness for Interprofessional Learning Scale (RIPLS) survey. The post-workshop survey also had a series of open-ended questions. Students' responses to each RIPLS statement pre-/post-workshop were compared, whilst their responses to open-ended questions in post-workshop survey were thematically analysed. Students reported positive attitudinal changes on statements of shared learning and teamwork sub-scale (Wilcoxon p value importance of teamwork and communication skills. This study found that learning with other health students through an IPE workshop improved medical, nursing and pharmacy students' attitudes towards the importance of shared learning, teamwork and communication in healthcare service.

TPC workshop summary

International Nuclear Information System (INIS)

Nygren, D.R.

1984-01-01

The Time Projection Chamber (TPC) concept is now nearly ten years old and, as is evident in this workshop, is still evolving in many directions. From the liquid xenon TPC for double beta decay studies to the impressively large second generation TPC for the LEP experiment ALEPH, the surprising diversity of current applications is apparent. This workshop, the first to concentrate solely on the TPC has provided a most congenial and rewarding occasion for all TPC enthusiasts to share experience, results, and ideas

t4 Workshop Report*

Science.gov (United States)

Kleensang, Andre; Maertens, Alexandra; Rosenberg, Michael; Fitzpatrick, Suzanne; Lamb, Justin; Auerbach, Scott; Brennan, Richard; Crofton, Kevin M.; Gordon, Ben; Fornace, Albert J.; Gaido, Kevin; Gerhold, David; Haw, Robin; Henney, Adriano; Ma’ayan, Avi; McBride, Mary; Monti, Stefano; Ochs, Michael F.; Pandey, Akhilesh; Sharan, Roded; Stierum, Rob; Tugendreich, Stuart; Willett, Catherine; Wittwehr, Clemens; Xia, Jianguo; Patton, Geoffrey W.; Arvidson, Kirk; Bouhifd, Mounir; Hogberg, Helena T.; Luechtefeld, Thomas; Smirnova, Lena; Zhao, Liang; Adeleye, Yeyejide; Kanehisa, Minoru; Carmichael, Paul; Andersen, Melvin E.; Hartung, Thomas

2014-01-01

Summary Despite wide-spread consensus on the need to transform toxicology and risk assessment in order to keep pace with technological and computational changes that have revolutionized the life sciences, there remains much work to be done to achieve the vision of toxicology based on a mechanistic foundation. A workshop was organized to explore one key aspect of this transformation – the development of Pathways of Toxicity (PoT) as a key tool for hazard identification based on systems biology. Several issues were discussed in depth in the workshop: The first was the challenge of formally defining the concept of a PoT as distinct from, but complementary to, other toxicological pathway concepts such as mode of action (MoA). The workshop came up with a preliminary definition of PoT as “A molecular definition of cellular processes shown to mediate adverse outcomes of toxicants”. It is further recognized that normal physiological pathways exist that maintain homeostasis and these, sufficiently perturbed, can become PoT. Second, the workshop sought to define the adequate public and commercial resources for PoT information, including data, visualization, analyses, tools, and use-cases, as well as the kinds of efforts that will be necessary to enable the creation of such a resource. Third, the workshop explored ways in which systems biology approaches could inform pathway annotation, and which resources are needed and available that can provide relevant PoT information to the diverse user communities. PMID:24127042

Workshop proceedings: "We are the Olifants" - Key stakeholder workshop for the Upper Olifants River study

CSIR Research Space (South Africa)

Funke, Nicola S

2013-03-31

Full Text Available Project Leader, Natural Resources and the Environment Council for Scientific and Industrial Research March 2013 Workshop Proceedings Page v EXECUTIVE SUMMARY The Upper Olifants Key Stakeholder Workshop took place at the CSIR Knowledge...

Proceedings of the Inheritance Workshop at ECOOP 2002

DEFF Research Database (Denmark)

2002-01-01

The Inheritance Workshop at ECOOP 2002, which took place on Tuesday, 11 June, was the first ECOOP workshop focusing on inheritance after the successful workshops in 1991 and 1992. The workshop was intended as a forum for designers and implementers of object-oriented languages, and for software de...

Sheltered Workshops and Transition: Old Bottles, New Wine?

Science.gov (United States)

Coombe, Edmund

This paper provides a historical overview of sheltered workshops and presents information about service innovations and mission expansion. The first workshop in the United States was the Perkins Institute, opened in 1837 for individuals with visual handicaps. This workshop was typical of "categorical" workshops that were established during this…

Ninth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Gudmundsson, J.S. (Stanford Geothermal Program)

1983-12-15

The attendance at the Workshop was similar to last year's with 123 registered participants of which 22 represented 8 foreign countries. A record number of technical papers (about 60) were submitted for presentation at the Workshop. The Program Committee, therefore, decided to have several parallel sessions to accommodate most of the papers. This format proved unpopular and will not be repeated. Many of the participants felt that the Workshop lost some of its unique qualities by having parallel sessions. The Workshop has always been held near the middle of December during examination week at Stanford. This timing was reviewed in an open discussion at the Workshop. The Program Committee subsequently decided to move the Workshop to January. The Tenth Workshop will be held on January 22-24, 1985. The theme of the Workshop this year was ''field developments worldwide''. The Program Committee addressed this theme by encouraging participants to submit field development papers, and by inviting several international authorities to give presentations at the Workshop. Field developments in at least twelve countries were reported: China, El Salvador, France, Greece, Iceland, Italy, Japan, Kenya, Mexico, New Zealand, the Philippines, and the United States. There were 58 technical presentations at the Workshop, of which 4 were not made available for publication. Several authors submitted papers not presented at the Workshop. However, these are included in the 60 papers of these Proceedings. The introductory address was given by Ron Toms of the U.S. Department of Energy, and the banquet speaker was A1 Cooper of Chevron Resources Company. An important contribution was made to the Workshop by the chairmen of the technical sessions. Other than Stanford Geothermal Program faculty members, they included: Don White (Field Developments), Bill D'Olier (Hydrothermal Systems), Herman Dykstra (Well Testing), Karsten Pruess (Well Testing), John Counsil

The ATLAS Electromagnetic Calorimeter Calibration Workshop

CERN Multimedia

Hong Ma; Isabelle Wingerter

The ATLAS Electromagnetic Calorimeter Calibration Workshop took place at LAPP-Annecy from the 1st to the 3rd of October; 45 people attended the workshop. A detailed program was setup before the workshop. The agenda was organised around very focused presentations where questions were raised to allow arguments to be exchanged and answers to be proposed. The main topics were: Electronics calibration Handling of problematic channels Cluster level corrections for electrons and photons Absolute energy scale Streams for calibration samples Calibration constants processing Learning from commissioning Forty-five people attended the workshop. The workshop was on the whole lively and fruitful. Based on years of experience with test beam analysis and Monte Carlo simulation, and the recent operation of the detector in the commissioning, the methods to calibrate the electromagnetic calorimeter are well known. Some of the procedures are being exercised in the commisssioning, which have demonstrated the c...

Summary of the PSI workshop

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-03-01

The PSI workshop had been held at JAERI-Naka, from March 15th to 16th, 2002. This workshop is held twice a year as the skull practice session to report the recent progress on the plasma - surface interactions of the experimental reactors such as ITER, JT-60, LHD, etc. and the development of the plasma facing components. There were 34 participants from the university and 18 participants from JAERI and 26 papers were presented. This booklet was published for the purpose of saving a record of this workshop performed in oral lecture form. (author)

8th International Workshop on Simulation

CERN Document Server

Rasch, Dieter; Melas, Viatcheslav; Moder, Karl; Statistics and simulation

2018-01-01

This volume features original contributions and invited review articles on mathematical statistics, statistical simulation and experimental design. The selected peer-reviewed contributions originate from the 8th International Workshop on Simulation held in Vienna in 2015. The book is intended for mathematical statisticians, Ph.D. students and statisticians working in medicine, engineering, pharmacy, psychology, agriculture and other related fields. The International Workshops on Simulation are devoted to statistical techniques in stochastic simulation, data collection, design of scientific experiments and studies representing broad areas of interest. The first 6 workshops took place in St. Petersburg, Russia, in 1994 – 2009 and the 7th workshop was held in Rimini, Italy, in 2013.

Workshop Polli Talu Loomingulises Keskuses

Index Scriptorium Estoniae

2004-01-01

MAP Intermedia Performance Collaboration'i (USA) workshop. Brendan McCall (liikumine), N. B. Aldrich (heli) ja Zach Poff (video) workshop tutvustab kolme kunstniku koostööd. Näidatakse ka multimeedia etendust, mis on külaliskunstnikel valminud Polli talus

IFPA meeting 2009 workshops report

DEFF Research Database (Denmark)

Lash, G.E.; Burton, G.J.; Chamley, L.W.

2010-01-01

Workshops are an important part of the annual meeting of the International Federation of Placenta Associations (IFPA). At IFPA Meeting 2009 diverse topics were discussed in twelve themed workshops. Topics covered included: immune response to pregnancy; signaling between fetus and placenta...

Final Scientific EFNUDAT Workshop

CERN Multimedia

CERN. Geneva

2010-01-01

The Final Scientific EFNUDAT Workshop - organized by the CERN/EN-STI group on behalf of n_TOF Collaboration - will be held at CERN, Geneva (Switzerland) from 30 August to 2 September 2010 inclusive.EFNUDAT website: http://www.efnudat.euTopics of interest include: Data evaluationCross section measurementsExperimental techniquesUncertainties and covariancesFission propertiesCurrent and future facilities  International Advisory Committee: C. Barreau (CENBG, France)T. Belgya (IKI KFKI, Hungary)E. Gonzalez (CIEMAT, Spain)F. Gunsing (CEA, France)F.-J. Hambsch (IRMM, Belgium)A. Junghans (FZD, Germany)R. Nolte (PTB, Germany)S. Pomp (TSL UU, Sweden) Workshop Organizing Committee: Enrico Chiaveri (Chairman)Marco CalvianiSamuel AndriamonjeEric BerthoumieuxCarlos GuerreroRoberto LositoVasilis Vlachoudis Workshop Assistant: Géraldine Jean

Diagnostic Imaging Workshop

International Nuclear Information System (INIS)

Sociedad Argentina de Fisica Medica

2012-01-01

The American Association of Physicist in Medicine (AAPM), the International Organization for Medical Physics (IOMP) and the Argentina Society of Medical Physics (SAFIM) was organized the Diagnostic Imaging Workshop 2012, in the city of Buenos Aires, Argentina. This workshop was an oriented training and scientific exchange between professionals and technicians who work in medical physics, especially in the areas of diagnostic imaging, nuclear medicine and radiotherapy, with special emphasis on the use of multimodal imaging for radiation treatment, planning as well of quality assurance associates.

Collider workshop

International Nuclear Information System (INIS)

Anon.

1982-01-01

The promise of initial results after the start of operations at CERN's SPS proton-antiproton collider and the prospects for high energy hadron collisions at Fermilab (Tevatron) and Brookhaven (ISABELLE) provided a timely impetus for the recent Topical Workshop on Forward Collider Physics', held at Madison, Wisconsin, from 10-12 December. It became the second such workshop to be held, the first having been in 1979 at the College de France, Paris. The 100 or so participants had the chance to hear preliminary results from the UA1, UA4 and UA5 experiments at the CERN SPS collider, together with other new data, including that from proton-antiproton runs at the CERN Intersecting Storage Rings

A Workshop in Transcultural Nursing.

Science.gov (United States)

Stevenson, Thomas B.

1986-01-01

Describes an experimental, week-long interdisciplinary (i.e., nursing and anthropology) workshop on the relationship between health and culture conducted by Ohio University, Zanesville, in conjunction with the University of Toronto. Discusses program formulation, objectives, results, and suggestions for future workshops. (LAL)

IFPA meeting 2008 workshops report

DEFF Research Database (Denmark)

Lash, G.E.; Ansari, T.; Bischof, P.

2009-01-01

Workshops are an important part of the IFPA annual meeting. At the IFPA meeting 2008 diverse topics were discussed in 12 themed workshops. Topics covered included: immunology of placentation; galectins and trophoblast invasion; signaling in implantation and invasion; markers to identify trophoblast...

Presentation Skills Workshops for Nurses.

Science.gov (United States)

Kinn, S.; Kenyon, M.

2002-01-01

Workshops were held to prepare nurses (n=87) to present results of professional activities. One year after the course, 20 had made oral and 30 written presentations. The workshops increased their confidence and were considered practical, informal, and nonthreatening. (Contains 31 references.) (SK)

Summary of experimental insertions workshop

International Nuclear Information System (INIS)

Sandweiss, J.; Month, M.

1976-01-01

An ISABELLE workshop of the summer 1976 series, which was held at Brookhaven August 16--20, focused on the design and utilization of the experimental insertions. The goals of the workshop are outlined, and a few general remarks about the results are presented

Action research Toolkit II: The Scenario Workshop

DEFF Research Database (Denmark)

Rasmussen, Lauge Baungaard

2003-01-01

The article describes the scenario workshop within the action research paradigm. In addtion, the maina phases and the functions of the facilitator and the participants are outlined. Finally,it describes and analyses the experiences of using the scenario workshop in practice.......The article describes the scenario workshop within the action research paradigm. In addtion, the maina phases and the functions of the facilitator and the participants are outlined. Finally,it describes and analyses the experiences of using the scenario workshop in practice....

International Workshop on Diagnostics for ITER

CERN Document Server

Gorini, Giuseppe; Sindoni, Elio

1996-01-01

This book of proceedings collects the papers presented at the Workshop on Diagnostics for ITER, held at Villa Monastero, Varenna (Italy), from August 28 to September 1, 1995. The Workshop was organised by the International School of Plasma Physics "Piero Caldirola. " Established in 1971, the ISPP has organised over fifty advanced courses and workshops on topics mainly related to plasma physics. In particular, courses and workshops on plasma diagnostics (previously held in 1975, 1978, 1982, 1986, and 1991) can be considered milestones in the history of this institution. Looking back at the proceedings of the previous meetings in Varenna, one can appreciate the rapid progress in the field of plasma diagnostics over the past 20 years. The 1995 workshop was co-organised by the Istituto di Fisica del Plasma of the National Research Council (CNR). In contrast to previous Varenna meetings on diagnostics, which have covered diagnostics in present-day tokamaks and which have had a substantial tutorial component, the 1...

Workshop on Developing Safe Software

International Nuclear Information System (INIS)

Lawrence, J.D.

1994-11-01

The Workshop on Developing Safe Software was held July 22--23, 1992, at the Hotel del Coronado, San Diego, California. The purpose of the workshop was to have four world experts discuss among themselves software safety issues which are of interest to the US Nuclear Regulatory Commission. These issues concern the development of software systems for use in nuclear power plant protection systems. The workshop comprised four sessions. Wednesday morning, July 22, consisted of presentations from each of the four panel members. On Wednesday afternoon, the panel members went through a list of possible software development techniques and commented on them. The Thursday morning, July 23, session consisted of an extended discussion among the panel members and the observers from the NRC. A final session on Thursday afternoon consisted of a discussion among the NRC observers as to what was learned from the workshop

Workshop on developing safe software

International Nuclear Information System (INIS)

Lawrence, J.D.

1992-01-01

The Workshop on Developing Safe Software was held July 22--23 at the Hotel del Coronado, San Diego, California. The purpose of the workshop was to have four world experts discuss among themselves software safety issues which are of interest to the U. S. Nuclear Regulatory Commission (NRC). These issues concern the development of software systems for use in nuclear power plant protection systems. The workshop comprised four sessions. Wednesday morning, July 22, consisted of presentations from each of the four panel members. On Wednesday afternoon, the panel members went through a list of possible software development techniques and commented on them. The Thursday morning, July 23, session consisted of an extended discussion among the panel members and the observers from the NRC. A final session on Thursday afternoon consisted of a discussion among the NRC observers as to what was teamed from the workshop

Synchronization of workshops, using facilities planning

Science.gov (United States)

Zineb, Britel; Abdelghani, Cherkaoui

2017-08-01

In this paper, we will present a methodology used for the synchronization of two workshops of a sheet metal department. These two workshops have a supplier-customer relationship. The aim of the study is to synchronise the two workshops as a step towards creating a better material flow, reduced inventory and achieving Just in time and lean production. To achieve this, we used a different set of techniques: SMED, Facilities planning…

Nuclear Energy Innovation Workshops. Executive Summary

Energy Technology Data Exchange (ETDEWEB)

Allen, Todd [Idaho National Lab. (INL), Idaho Falls, ID (United States); Jackson, John [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hildebrandt, Phil [Idaho National Lab. (INL), Idaho Falls, ID (United States); Baker, Suzy [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-06-01

The nuclear energy innovation workshops were organized and conducted by INL on March 2-4, 2015 at the five NUC universities and Boise State University. The output from these workshops is summarized with particular attention to final summaries that were provided by technical leads at each of the workshops. The current revision includes 3-4 punctuation corrections and a correction of the month of release from May to June.

International workshop on multimodal analyses enabling artificial agents in human-machine interaction (workshop summary)

NARCIS (Netherlands)

Böck, Ronald; Bonin, Francesca; Campbell, Nick; Poppe, R.W.

2016-01-01

In this paper a brief overview of the third workshop on Multimodal Analyses enabling Artificial Agents in Human-Machine Interaction. The paper is focussing on the main aspects intended to be discussed in the workshop reflecting the main scope of the papers presented during the meeting. The MA3HMI

International Intercomparison of Calorimeters. A Report of Measurements Made in the Reactor Melusine at C.E.N. Grenoble March 1970 by Eight Reactor Calorimetry Groups from Six Member States of the IAEA

International Nuclear Information System (INIS)

Boyd, A.W.

1970-01-01

The Working Group on Reactor Radiation Measurements has recommended an international intercomparison of calorimeters through its Subgroup 5 on calorimetric methods. Through the cooperation of the IAEA and the Centre d'Etudes Nucléaires de Grenoble of the Commissariat à l'Energie Atomique of France, the intercomparison was arranged. Representatives of eight dosimetry groups from six countries took part in this intercomparison which was carried out during the period 9-17 March 1970. This document will help workers in the field of absorbed dose measurements in reactors in choosing consistent and accurate procedures of experimentation and reporting data

AAAI Workshop on Nonmonotonic Reasoning

OpenAIRE

Etherington, David

1985-01-01

On October 17-19 1984 a workshop on non-monotonic reasoning was held at Mohonk Mountain House, outside New Paltz, New York. The workshop was organized by Raymond Reiter and Bonnie Webber, and was sponsored by the Association for the Advancement of Artificial Intelligence.

Pressurized water reactor simulator. Workshop material

International Nuclear Information System (INIS)

2003-01-01

The International Atomic Energy Agency (IAEA) has established an activity in nuclear reactor simulation computer programs to assist its Member States in education. The objective is to provide, for a variety of advanced reactor types, insight and practice in their operational characteristics and their response to perturbations and accident situations. To achieve this, the IAEA arranges for the development and distribution of simulation programs and educational material and sponsors courses and workshops. The workshops are in two parts: techniques and tools for reactor simulator development; and the use of reactor simulators in education. Workshop material for the first part is covered in the IAEA Training Course Series No. 12, 'Reactor Simulator Development' (2001). Course material for workshops using a WWER- 1000 reactor department simulator from the Moscow Engineering and Physics Institute, the Russian Federation is presented in the IAEA Training Course Series No. 21 'WWER-1000 Reactor Simulator' (2002). Course material for workshops using a boiling water reactor simulator developed for the IAEA by Cassiopeia Technologies Incorporated of Canada (CTI) is presented in the IAEA publication: Training Course Series No.23 'Boiling Water Reactor Simulator' (2003). This report consists of course material for workshops using a pressurized water reactor simulator

Report on the final BRACElet workshop

Directory of Open Access Journals (Sweden)

Tony Clear

Full Text Available This paper reports on the thirteenth and final BRACElet workshop. In this paper we provide a brief retrospective review of the workshops and the findings that have resulted from this multi-institutional multinational investigation into the teaching and learning of novice programmers. Subsequently we report on the work undertaken during the final workshop and then discuss future avenues for research that have evolved as a result of the BRACElet project.

Building Strong Geoscience Departments Through the Visiting Workshop Program

Science.gov (United States)

Ormand, C. J.; Manduca, C. A.; Macdonald, H.; Bralower, T. J.; Clemens-Knott, D.; Doser, D. I.; Feiss, P. G.; Rhodes, D. D.; Richardson, R. M.; Savina, M. E.

2011-12-01

The Building Strong Geoscience Departments project focuses on helping geoscience departments adapt and prosper in a changing and challenging environment. From 2005-2009, the project offered workshop programs on topics such as student recruitment, program assessment, preparing students for the workforce, and strengthening geoscience programs. Participants shared their departments' challenges and successes. Building on best practices and most promising strategies from these workshops and on workshop leaders' experiences, from 2009-2011 the project ran a visiting workshop program, bringing workshops to 18 individual departments. Two major strengths of the visiting workshop format are that it engages the entire department in the program, fostering a sense of shared ownership and vision, and that it focuses on each department's unique situation. Departments applied to have a visiting workshop, and the process was highly competitive. Selected departments chose from a list of topics developed through the prior workshops: curriculum and program design, program elements beyond the curriculum, recruiting students, preparing students for the workforce, and program assessment. Two of our workshop leaders worked with each department to customize and deliver the 1-2 day programs on campus. Each workshop incorporated exercises to facilitate active departmental discussions, presentations incorporating concrete examples drawn from the leaders' experience and from the collective experiences of the geoscience community, and action planning to scaffold implementation. All workshops also incorporated information on building departmental consensus and assessing departmental efforts. The Building Strong Geoscience Departments website complements the workshops with extensive examples from the geoscience community. Of the 201 participants in the visiting workshop program, 140 completed an end of workshop evaluation survey with an overall satisfaction rating of 8.8 out of a possible 10

Report on the second international workshop on residential radon: Workshop proceedings

International Nuclear Information System (INIS)

1991-07-01

As a follow-on to the first International Workshop on Residential Radon Epidemiology held in Alexandria VA, on July 24-26, 1989, a Second Workshop was convened, in Alexandria, VA, July 22-23 1991, also under the auspices of the US Department of Energy and the Commission of European Communities. The Workshop, co-chaired by Jonathan Samet and Jan Stolwijk, was attended by 20 active participants from seven countries representing epidemiologic studies recently completed, currently in progress, or in the last stages of preparation. The studies reported on are being conducted in the United States, Canada, Sweden, the United Kingdom, France, Belgium, Germany and the Peoples' Republic of China. The invited presentations that initiated the Workshop focused on a number of methodological problems that have surfaced in the last few years. Among these were: (1) the difficulties in predicting indoor radon concentrations, based on geologic information, (discussed by Alan Tanner, formerly of the US Geologic Survey); (2) the relationships between indoor radon concentrations and building characteristics (discussed by Richard Sextro, Lawrence Berkeley Laboratory, USA); (3) the approaches to analysis of case-control studies in radon epidemiology (discussed by Sarah Darby, Imperial Cancer Research Fund, UK); (4) statistical approaches to error in measurements and missing data (discussed by Donna Spiegelman, Tufts University, USA); (5) preliminary results of a data pooling effort dealing with several different studies of residential radon epidemiology and the lessons to be drawn from this effort (discussed by Jay Lubin, US National Cancer Institute)

Physics Analysis Tools Workshop 2007

CERN Multimedia

Elizabeth Gallas,

The ATLAS PAT (Physics Analysis Tools) group evaluates, develops and tests software tools for the analysis of physics data, consistent with the ATLAS analysis and event data models. Following on from earlier PAT workshops in London (2004), Tucson (2005) and Tokyo (2006), this year's workshop was hosted by the University of Bergen in Norway on April 23-28 with more than 60 participants. The workshop brought together PAT developers and users to discuss the available tools with an emphasis on preparing for data taking. At the start of the week, workshop participants, laptops and power converters in-hand, jumped headfirst into tutorials, learning how to become trigger-aware and how to use grid computing resources via the distributed analysis tools Panda and Ganga. The well organised tutorials were well attended and soon the network was humming, providing rapid results to the users and ample feedback to the developers. A mid-week break was provided by a relaxing and enjoyable cruise through the majestic Norwegia...

2nd Ralf Yorque Workshop

CERN Document Server

1985-01-01

These are the proceedings of the Second R. Yorque Workshop on Resource Management which took place in Ashland, Oregon on July 23-25, 1984. The purpose of the workshop is to provide an informal atmosphere for the discussion of resource assessment and management problems. Each participant presented a one hour morning talk; afternoons were reserved for informal chatting. The workshop was successful in stimulating ideas and interaction. The papers by R. Deriso, R. Hilborn and C. Walters all address the same basic issue, so they are lumped together. Other than that, the order to the papers in this volume was determined in the same fashion as the order of speakers during the workshop -- by random draw. Marc Mangel Department of Mathematics University of California Davis, California June 1985 TABLE OF CONTENTS A General Theory for Fishery Modeling Jon Schnute Data Transformations in Regression Analysis with Applications to Stock-Recruitment Relationships David Ruppert and Raymond J. Carroll ••••••. •�...

Nineteenth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Horne, R.J.; Kruger, P.; Miller, F.G.; Brigham, W.E.; Cook, J.W. (Stanford Geothermal Program)

1994-01-20

PREFACE The Nineteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 18-20, 1994. This workshop opened on a sad note because of the death of Prof. Henry J. Ramey, Jr. on November 19, 1993. Hank had been fighting leukemia for a long time and finally lost the battle. Many of the workshop participants were present for the celebration of his life on January 21 at Stanford's Memorial Church. Hank was one of the founders of the Stanford Geothermal Program and the Geothermal Reservoir Engineering Workshop. His energy, kindness, quick wit, and knowledge will long be missed at future workshops. Following the Preface we have included a copy of the Memorial Resolution passed by the Stanford University Senate. There were one hundred and four registered participants. Participants were from ten foreign countries: Costa Rica, England, Iceland, Italy, Japan, Kenya, Mexico, New Zealand, Philippines and Turkey. Workshop papers described the performance of fourteen geothermal fields outside the United States. Roland N. Home opened the meeting and welcomed the visitors to the campus. The key note speaker was J.E. ''Ted'' Mock who gave a presentation about the future of geothermal development. The banquet speaker was Jesus Rivera and he spoke about Energy Sources of Central American Countries. Forty two papers were presented at the Workshop. Technical papers were organized in twelve sessions concerning: sciences, injection, production, modeling, and adsorption. Session chairmen are an important part of the workshop and our thanks go to: John Counsil, Mark Walters, Dave Duchane, David Faulder, Gudmundur Bodvarsson, Jim Lovekin, Joel Renner, and Iraj Ershaghi. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Ted Sumida, and Terri A. Ramey who also produces the Proceedings Volumes for publication. We owe a great deal of thanks to our students who

Workshop on Accelerators for Heavy Ion Fusion: Summary Report of the Workshop

Energy Technology Data Exchange (ETDEWEB)

Seidl, P.A.; Barnard, J.J.

2011-04-29

The Workshop on Accelerators for Heavy Ion Fusion was held at Lawrence Berkeley National Laboratory May 23-26, 2011. The workshop began with plenary sessions to review the state of the art in HIF (heavy ion fusion), followed by parallel working groups, and concluded with a plenary session to review the results. There were five working groups: IFE (inertial fusion energy) targets, RF approach to HIF, induction accelerator approach to HIF, chamber and driver interface, ion sources and injectors.

Industrial Fuel Flexibility Workshop

Energy Technology Data Exchange (ETDEWEB)

none,

2006-09-01

On September 28, 2006, in Washington, DC, ITP and Booz Allen Hamilton conducted a fuel flexibility workshop with attendance from various stakeholder groups. Workshop participants included representatives from the petrochemical, refining, food and beverage, steel and metals, pulp and paper, cement and glass manufacturing industries; as well as representatives from industrial boiler manufacturers, technology providers, energy and waste service providers, the federal government and national laboratories, and developers and financiers.

Hydrogen Technology Education Workshop Proceedings

Energy Technology Data Exchange (ETDEWEB)

None

2002-12-01

This document outlines activities for educating key target audiences, as suggested by workshop participants. Held December 4-5, 2002, the Hydrogen Technology Education Workshop kicked off a new education effort coordinated by the Hydrogen, Fuel Cells, & Infrastructure Technologies Program of the Office of Energy Efficiency and Renewable Energy.

Beta Cell Workshop 2013 Kyoto

DEFF Research Database (Denmark)

Heller, R Scott; Madsen, Ole D; Nielsen, Jens Høiriis

2013-01-01

The very modern Kyoto International Conference Center provided the site for the 8th workshop on Beta cells on April 23-26, 2013. The preceding workshops were held in Boston, USA (1991); Kyoto, Japan (1994); Helsingør, Denmark (1997); Helsinki, Finland (2003); El Perello, Spain (2006); Peebles...

The ROS Workshop

CERN Multimedia

Francis, D.

The first week of February saw the taking place of the ReadOut Subsystem (ROS) workshop. The ROS is the subsystem of the Trigger, DAQ & DCS project which receives and buffers data from the detector ReadOut Drivers (RODs). On request it then provides a subset of this buffered data, the so-called Regions of Interest (RoI), to the Level 2 trigger. Using the subsequent Level 2 trigger decision, the ROS either removes the buffered event data from its buffers or sends the full event data to the Event Filter for further processing. The workshop took place over a four-day period at a location in the Jura. The average daily attendance was twenty people, which mainly represented the five main ATLAS institutes currently engaged in this Trigger, DAQ & DCS activity. The aim of the workshop was to bring to an end the current prototyping activities in this area and launch the next, final, phase of prototyping. This new phase of prototyping will build on the successful activities of the previous phase and will focus...

Calendar of Selected Aeronautical and Space Meetings (Calendrier des Manifestations Aeronautiques et Spatiales (Selection)).

Science.gov (United States)

1983-01-01

Processing 05-13 19-21 July Marseilli (FR) IFAC-AFCE" Nymposium sur la Theorie des Cybernetics IFAC Ensembles Flous et Intelligence Artificielle ...Analysis x 05-15 8-12 August Karlsruhe (GE) IJCAI International Con’erence on Artificial Cybernetics IJCAI Intelligence Automatic Control Pattern Recognition...17081, Tel-Aviv IL UJCAI International Joint Conferences on Artificial Intelligence : c/o SRI International, Menlo Park, CA 94025 US IMACS International

International Workshop on Linear Colliders 2010

CERN Multimedia

CERN. Geneva

2010-01-01

IWLC2010 International Workshop on Linear Colliders 2010ECFA-CLIC-ILC joint meeting: Monday 18 October - Friday 22 October 2010Venue: CERN and CICG (International Conference Centre Geneva, Switzerland) This year, the International Workshop on Linear Colliders organized by the European Committee for Future Accelerators (ECFA) will study the physics, detectors and accelerator complex of a linear collider covering both CLIC and ILC options.Contact Workshop Secretariat  IWLC2010 is hosted by CERN

Replacing lecture with peer-led workshops improves student learning.

Science.gov (United States)

Preszler, Ralph W

2009-01-01

Peer-facilitated workshops enhanced interactivity in our introductory biology course, which led to increased student engagement and learning. A majority of students preferred attending two lectures and a workshop each week over attending three weekly lectures. In the workshops, students worked in small cooperative groups as they solved challenging problems, evaluated case studies, and participated in activities designed to improve their general learning skills. Students in the workshop version of the course scored higher on exam questions recycled from preworkshop semesters. Grades were higher over three workshop semesters in comparison with the seven preworkshop semesters. Although males and females benefited from workshops, there was a larger improvement of grades and increased retention by female students; although underrepresented minority (URM) and non-URM students benefited from workshops, there was a larger improvement of grades by URM students. As well as improving student performance and retention, the addition of interactive workshops also improved the quality of student learning: Student scores on exam questions that required higher-level thinking increased from preworkshop to workshop semesters.

76 FR 58281 - Magnetic Resonance Imaging Safety; Public Workshop

Science.gov (United States)

2011-09-20

...] Magnetic Resonance Imaging Safety; Public Workshop AGENCY: Food and Drug Administration, HHS. ACTION... announcing a public workshop entitled: ``Magnetic Resonance Imaging (MRI) Safety Public Workshop.'' The purpose of the public workshop is to discuss factors affecting the safe use of magnetic resonance imaging...

Rotational Seismology Workshop of February 2006

Science.gov (United States)

Evans, John R.; Cochard, A.; Graizer, Vladimir; Huang, Bor-Shouh; Hudnut, Kenneth W.; Hutt, Charles R.; Igel, H.; Lee, William H.K.; Liu, Chun-Chi; Majewski, Eugeniusz; Nigbor, Robert; Safak, Erdal; Savage, William U.; Schreiber, U.; Teisseyre, Roman; Trifunac, Mihailo; Wassermann, J.; Wu, Chien-Fu

2007-01-01

Introduction A successful workshop titled 'Measuring the Rotation Effects of Strong Ground Motion' was held simultaneously in Menlo Park and Pasadena via video conference on 16 February 2006. The purpose of the Workshop and this Report are to summarize existing data and theory and to explore future challenges for rotational seismology, including free-field strong motion, structural strong motion, and teleseismic motions. We also forged a consensus on the plan of work to be pursued by this international group in the near term. At this first workshop were 16 participants in Menlo Park, 13 in Pasadena, and a few on the telephone. It was organized by William H. K. Lee and John R. Evans and chaired by William U. Savage in Menlo Park and by Kenneth W. Hudnut in Pasadena. Its agenda is given in the Appendix. This workshop and efforts in Europe led to the creation of the International Working Group on Rotational Seismology (IWGoRS), an international volunteer group providing forums for exchange of ideas and data as well as hosting a series of Workshops and Special Sessions. IWGoRS created a Web site, backed by an FTP site, for distribution of materials related to rotational seismology. At present, the FTP site contains the 2006 Workshop agenda (also given in the Appendix below) and its PowerPoint presentations, as well as many papers (reasonable-only basis with permission of their authors), a comprehensive citations list, and related information. Eventually, the Web site will become the sole authoritative source for IWGoRS and shared information: http://www.rotational-seismology.org ftp://ehzftp.wr.usgs.gov/jrevans/IWGoRS_FTPsite/ With contributions from various authors during and after the 2006 Workshop, this Report proceeds from the theoretical bases for making rotational measurements (Graizer, Safak, Trifunac) through the available observations (Huang, Lee, Liu, Nigbor), proposed suites of measurements (Hudnut), a discussion of broadband teleseismic rotational

Geometric Methods in Physics : XXXIII Workshop

CERN Document Server

Bieliavsky, Pierre; Odzijewicz, Anatol; Schlichenmaier, Martin; Voronov, Theodore

2015-01-01

This book presents a selection of papers based on the XXXIII Białowieża Workshop on Geometric Methods in Physics, 2014. The Białowieża Workshops are among the most important meetings in the field and attract researchers from both mathematics and physics. The articles gathered here are mathematically rigorous and have important physical implications, addressing the application of geometry in classical and quantum physics. Despite their long tradition, the workshops remain at the cutting edge of ongoing research. For the last several years, each Białowieża Workshop has been followed by a School on Geometry and Physics, where advanced lectures for graduate students and young researchers are presented; some of the lectures are reproduced here. The unique atmosphere of the workshop and school is enhanced by its venue, framed by the natural beauty of the Białowieża forest in eastern Poland. The volume will be of interest to researchers and graduate students in mathematical physics, theoretical physics and m...

Geometric Methods in Physics : XXXII Workshop

CERN Document Server

Bieliavsky, Pierre; Odesskii, Alexander; Odzijewicz, Anatol; Schlichenmaier, Martin; Voronov, Theodore; Geometric Methods in Physics

2014-01-01

The Białowieża Workshops on Geometric Methods in Physics, which are hosted in the unique setting of the Białowieża natural forest in Poland, are among the most important meetings in the field. Every year some 80 to 100 participants from both the mathematics and physics world join to discuss new developments and to exchange ideas. The current volume was produced on the occasion of the 32nd meeting in 2013. It is now becoming a tradition that the Workshop is followed by a School on Geometry and Physics, which consists of advanced lectures for graduate students and young researchers. Selected speakers at the 2013 Workshop were asked to contribute to this book, and their work was supplemented by additional review articles. The selection shows that, despite its now long tradition, the workshop remains at the cutting edge of research. The 2013 Workshop also celebrated the 75th birthday of Daniel Sternheimer, and on this occasion the discussion mainly focused on his contributions to mathematical physics such as ...

A Death Awareness Workshop: Theory, Application, and Results.

Science.gov (United States)

Whelan, W. Michael; Warren, William M.

1980-01-01

Describes an experimental death awareness workshop based on Kubler-Ross' theory. The effects of the workshop reveal cognitive and emotional changes indicating participants in the workshop to be moving towards an acceptance of death. (Author)

A Portable Computer Security Workshop

Science.gov (United States)

Wagner, Paul J.; Phillips, Andrew T.

2006-01-01

We have developed a computer security workshop designed to instruct post-secondary instructors who want to start a course or laboratory exercise sequence in computer security. This workshop has also been used to provide computer security education to IT professionals and students. It is effective in communicating basic computer security principles…

Secondary School Design: Workshop Crafts.

Science.gov (United States)

Department of Education and Science, London (England).

Design features are described for school shop facilities. Some general requirements common to most workshops are discussed; and specific design information is provided for general woodwork, general metalwork, and combined wood and metalwork facilities. The grouping of the workshop crafts and their relation to other parts of the school are also…

Flywheel energy storage workshop

Energy Technology Data Exchange (ETDEWEB)

O`Kain, D.; Carmack, J. [comps.

1995-12-31

Since the November 1993 Flywheel Workshop, there has been a major surge of interest in Flywheel Energy Storage. Numerous flywheel programs have been funded by the Advanced Research Projects Agency (ARPA), by the Department of Energy (DOE) through the Hybrid Vehicle Program, and by private investment. Several new prototype systems have been built and are being tested. The operational performance characteristics of flywheel energy storage are being recognized as attractive for a number of potential applications. Programs are underway to develop flywheels for cars, buses, boats, trains, satellites, and for electric utility applications such as power quality, uninterruptible power supplies, and load leveling. With the tremendous amount of flywheel activity during the last two years, this workshop should again provide an excellent opportunity for presentation of new information. This workshop is jointly sponsored by ARPA and DOE to provide a review of the status of current flywheel programs and to provide a forum for presentation of new flywheel technology. Technology areas of interest include flywheel applications, flywheel systems, design, materials, fabrication, assembly, safety & containment, ball bearings, magnetic bearings, motor/generators, power electronics, mounting systems, test procedures, and systems integration. Information from the workshop will help guide ARPA & DOE planning for future flywheel programs. This document is comprised of detailed viewgraphs.

Final Technical Report: Electronic Structure Workshop (ES13)

Energy Technology Data Exchange (ETDEWEB)

Zhang, Shiwei [College of William and Mary, Williamsburg, VA (United States)

2015-02-26

The 25th Annual Workshop on Recent Developments in Electronic Structure Methods (ES2013) was successfully held at the College of William & Mary in Williamsburg VA on June 11-14, 2013. The workshop website is at http://es13.wm.edu/ , which contains updated information on the workshop and a permanent archive of the scientific contents. DOE's continued support has been instrumental to the success of the workshop.

A stress management workshop improves residents' coping skills.

Science.gov (United States)

McCue, J D; Sachs, C L

1991-11-01

We describe the effectiveness of a stress management workshop designed for physicians. Of the 64 medicine, pediatrics, and medicine-pediatrics residents who agreed to participate in the workshop, the 43 who could be freed from clinical responsibilities constituted the intervention group; the 21 residents who could not be freed from clinical responsibilities were asked to be the nonintervention group. The ESSI Stress Systems Instrument and Maslach Burnout Inventory were administered to control subjects and workshop participants 2 weeks before and 6 weeks after the workshop. The half-day workshops taught management of the stresses of medical practice through: (1) learning and practicing interpersonal skills that increase the availability of social support; (2) prioritization of personal, work, and educational demands; (3) techniques to increase stamina and attend to self-care needs; (4) recognition and avoidance of maladaptive responses; and (5) positive outlook skills. Overall, the ESSI Stress Systems Instrument test scores for the workshop participants improved (+1.27), while the nonintervention group's mean scores declined (-0.65). All 21 individual ESSI Stress Systems Instrument scale items improved for the workshop, compared with eight of 21 items for the nonintervention group. The workshop group improved in the Maslach Burnout Inventory emotional exhaustion scale and deteriorated less than the nonintervention group in the depersonalization scale. We conclude that a modest, inexpensive stress management workshop was received positively, and can lead to significant short-term improvement in stress and burnout test scores for medicine and pediatrics residents.

Buildings energy management program workshop design. Final report

Energy Technology Data Exchange (ETDEWEB)

None

1978-12-01

This document describes activities undertaken by Honeywell's Energy Resources Center for design and development of the format, content, and materials that were used in conducting 129 one-day energy management workshops for specific commercial business audiences. The Building Energy Management Workshop Program was part of a National Workshop Program that was intended to increase awareness of energy-related issues and to encourage energy-conservation actions on the part of commercial and industrial sectors. The total effort included executive conferences for chief executive officers and other senior management personnel; industrial energy-conservation workshops directed at plant management and engineering personnel; vanpooling workshops designed to inform and encourage business in implementing a vanpooling program for employees; and the building energy-management workshops specifically developed for managers, owners, and operators of office and retail facilities, restaurants, and supermarkets. The total program spanned nearly two years and reached approximately 2,500 participants from all parts of the U.S. A detailed followup evaluation is still being conducted to determine the impact of this program in terms of conservation action undertaken by workshop participants.

Sixth international wind-diesel workshop

International Nuclear Information System (INIS)

1992-01-01

At a workshop on hybrid wind/diesel power generation systems, papers were presented on international research programs, demonstration projects, wind/diesel deployment strategies and requirements, wind/diesel market development and economics, wind turbine design requirements, and wind/diesel models and analytical tools. Separate abstracts have been prepared for 11 papers from this workshop

Sixth international wind-diesel workshop

Energy Technology Data Exchange (ETDEWEB)

1992-01-01

At a workshop on hybrid wind/diesel power generation systems, papers were presented on international research programs, demonstration projects, wind/diesel deployment strategies and requirements, wind/diesel market development and economics, wind turbine design requirements, and wind/diesel models and analytical tools. Separate abstracts have been prepared for 11 papers from this workshop.

Non-probabilistic defect assessment for structures with cracks based on interval model

International Nuclear Information System (INIS)

Dai, Qiao; Zhou, Changyu; Peng, Jian; Chen, Xiangwei; He, Xiaohua

2013-01-01

Highlights: • Non-probabilistic approach is introduced to defect assessment. • Definition and establishment of IFAC are put forward. • Determination of assessment rectangle is proposed. • Solution of non-probabilistic reliability index is presented. -- Abstract: Traditional defect assessment methods conservatively treat uncertainty of parameters as safety factors, while the probabilistic method is based on the clear understanding of detailed statistical information of parameters. In this paper, the non-probabilistic approach is introduced to the failure assessment diagram (FAD) to propose a non-probabilistic defect assessment method for structures with cracks. This novel defect assessment method contains three critical processes: establishment of the interval failure assessment curve (IFAC), determination of the assessment rectangle, and solution of the non-probabilistic reliability degree. Based on the interval theory, uncertain parameters such as crack sizes, material properties and loads are considered as interval variables. As a result, the failure assessment curve (FAC) will vary in a certain range, which is defined as IFAC. And the assessment point will vary within a rectangle zone which is defined as an assessment rectangle. Based on the interval model, the establishment of IFAC and the determination of the assessment rectangle are presented. Then according to the interval possibility degree method, the non-probabilistic reliability degree of IFAC can be determined. Meanwhile, in order to clearly introduce the non-probabilistic defect assessment method, a numerical example for the assessment of a pipe with crack is given. In addition, the assessment result of the proposed method is compared with that of the traditional probabilistic method, which confirms that this non-probabilistic defect assessment can reasonably resolve the practical problem with interval variables

Non-probabilistic defect assessment for structures with cracks based on interval model

Energy Technology Data Exchange (ETDEWEB)

Dai, Qiao; Zhou, Changyu, E-mail: changyu_zhou@163.com; Peng, Jian; Chen, Xiangwei; He, Xiaohua

2013-09-15

Highlights: • Non-probabilistic approach is introduced to defect assessment. • Definition and establishment of IFAC are put forward. • Determination of assessment rectangle is proposed. • Solution of non-probabilistic reliability index is presented. -- Abstract: Traditional defect assessment methods conservatively treat uncertainty of parameters as safety factors, while the probabilistic method is based on the clear understanding of detailed statistical information of parameters. In this paper, the non-probabilistic approach is introduced to the failure assessment diagram (FAD) to propose a non-probabilistic defect assessment method for structures with cracks. This novel defect assessment method contains three critical processes: establishment of the interval failure assessment curve (IFAC), determination of the assessment rectangle, and solution of the non-probabilistic reliability degree. Based on the interval theory, uncertain parameters such as crack sizes, material properties and loads are considered as interval variables. As a result, the failure assessment curve (FAC) will vary in a certain range, which is defined as IFAC. And the assessment point will vary within a rectangle zone which is defined as an assessment rectangle. Based on the interval model, the establishment of IFAC and the determination of the assessment rectangle are presented. Then according to the interval possibility degree method, the non-probabilistic reliability degree of IFAC can be determined. Meanwhile, in order to clearly introduce the non-probabilistic defect assessment method, a numerical example for the assessment of a pipe with crack is given. In addition, the assessment result of the proposed method is compared with that of the traditional probabilistic method, which confirms that this non-probabilistic defect assessment can reasonably resolve the practical problem with interval variables.

Workshop presentations

International Nuclear Information System (INIS)

Sanden, Per-Olof; Edland, Anne; Reiersen, Craig; Mullins, Peter; Ingemarsson, Karl-Fredrik; Bouchard, Andre; Watts, Germaine; Johnstone, John; Hollnagel, Erik; Ramberg, Patric; Reiman, Teemu

2009-01-01

An important part of the workshop was a series of invited presentations. The presentations were intended to both provide the participants with an understanding of various organisational approaches and activities as well as to stimulate the exchange of ideas during the small group discussion sessions. The presentation subjects ranged from current organisational regulations and licensee activities to new organisational research and the benefits of viewing organisations from a different perspective. There were more than a dozen invited presentations. The initial set of presentations gave the participants an overview of the background, structure, and aims of the workshop. This included a short presentation on the results from the regulatory responses to the pre-workshop survey. Representatives from four countries (Sweden, Canada, Finland, and the United Kingdom) expanded upon their survey responses with detailed presentations on both regulatory and licensee safety-related organisational activities in their countries. There were also presentations on new research concerning how to evaluate safety critical organisations and on a resilience engineering perspective to safety critical organisations. Below is the list of the presentations, the slides of which being available in Appendix 2: 1 - Workshop Welcome (Per-Olof Sanden); 2 - CSNI Working Group on Human and Organisational Factors (Craig Reiersen); 3 - Regulatory expectations on justification of suitability of licensee organisational structures, resources and competencies (Anne Edland); 4 - Justifying the suitability of licensee organisational structures, resources and competencies (Karl-Fredrik Ingemarsson); 5 - Nuclear Organisational Suitability in Canada (Andre Bouchard); 6 - Designing and Resourcing for Safety and Effectiveness (Germaine Watts); 7 - Organisational Suitability - What do you need and how do you know that you've got it? (Craig Reiersen); 8 - Suitability of Organisations - UK Regulator's View (Peter

PREFACE: Collapse Calderas Workshop

Science.gov (United States)

Gottsmann, Jo; Aguirre-Diaz, Gerardo

2008-10-01

Caldera-formation is one of the most awe-inspiring and powerful displays of nature's force. Resultant deposits may cover vast areas and significantly alter the immediate topography. Post-collapse activity may include resurgence, unrest, intra-caldera volcanism and potentially the start of a new magmatic cycle, perhaps eventually leading to renewed collapse. Since volcanoes and their eruptions are the surface manifestation of magmatic processes, calderas provide key insights into the generation and evolution of large-volume silicic magma bodies in the Earth's crust. Despite their potentially ferocious nature, calderas play a crucial role in modern society's life. Collapse calderas host essential economic deposits and supply power for many via the exploitation of geothermal reservoirs, and thus receive considerable scientific, economic and industrial attention. Calderas also attract millions of visitors world-wide with their spectacular scenic displays. To build on the outcomes of the 2005 calderas workshop in Tenerife (Spain) and to assess the most recent advances on caldera research, a follow-up meeting was proposed to be held in Mexico in 2008. This abstract volume presents contributions to the 2nd Calderas Workshop held at Hotel Misión La Muralla, Querétaro, Mexico, 19-25 October 2008. The title of the workshop `Reconstructing the evolution of collapse calderas: Magma storage, mobilisation and eruption' set the theme for five days of presentations and discussions, both at the venue as well as during visits to the surrounding calderas of Amealco, Amazcala and Huichapan. The multi-disciplinary workshop was attended by more than 40 scientist from North, Central and South America, Europe, Australia and Asia. Contributions covered five thematic topics: geology, geochemistry/petrology, structural analysis/modelling, geophysics, and hazards. The workshop was generously supported by the International Association of Volcanology and the Chemistry of The Earth's Interior

Proceedings of the fifth workshop on containment integrity

Energy Technology Data Exchange (ETDEWEB)

Parks, M.B.; Hughey, C.E. [eds.] [Sandia National Labs., Albuquerque, NM (United States)

1992-07-01

The Fifth Workshop on Containment integrity was held in Washington, DC, on May 12--14, 1992. The purpose of these workshops is to provide an international forum for the exchange of information on performance of containments in nuclear power plants under severe accident loadings. Severe accident investigations of existing containment designs as well as future advanced containments were presented during the workshop. There were 145 participants at the workshop from 15 countries. Individual papers have been cataloged separately.

PS2004 Light-harvesting Systems Workshop

Energy Technology Data Exchange (ETDEWEB)

Blankenship, Robert E.

2005-01-01

This special issue of the international scientific research journal Photosynthesis Research consists of 25 original peer-reviewed contributions from participants in the PS 2004 Lisht-Harvesting Systems Workshop. This workshop was held from 26-29, 2004 at Hotel Le Chantecler, Sainte-Adele, Quebec, Canada. The workshop was a satellite meeting of the XIII International Congress on Photosynthesis held August 29-September 3, 2004 in Montreal, Canada. The workshope dealt with all types of photosynthetic antenna systems and types of organisms, including anoxygenic photosynthetic bacteria, cyanobacteria, algae and higher plants, as well as in vitro studies of isolated pigments. This collection of papers is a good representation of the highly interdisciplinary nature of modern research on photosynthetic antenna complexes, utilizing techniques of advanced spectroscopy, biochemistry, molecular biology, synthetic chemistry and structural determination to understand these diverse and elegant molecular complexes.

Connecting with the Arts: A Workshop for Middle Grades Teachers

Science.gov (United States)

Annenberg Media, 2005

2005-01-01

"Connecting with the Arts: A Workshop for Middle Grades Teachers" is a video workshop for middle school teachers of the arts and other subjects. The workshop includes eight hour-long video programs and a companion workshop guide and Web site. The workshop shows middle school teachers why and how to integrate the arts (dance, music, theatre, and…

Influence Of Extension Education Workshop On Cabbage Growers ...

African Journals Online (AJOL)

Influence Of Extension Education Workshop On Cabbage Growers Awareness And Knowledge Of Ipm In Aghtapeh Town, Iran. ... A survey was conducted among 60 farmers in Karaj County that included 30 workshop participants, and 30 randomly selected farmers. The study found that workshop participants had ...

Proceedings of 6th International Microbeam Workshop/12th L.H. Gray Workshop Microbeam Probes of Cellular Radiation Response

International Nuclear Information System (INIS)

Prise, Kevin M.

2004-01-01

The extended abstracts which are submitted here present a summary of the proceedings of the 6th International Workshop/12th LH Gray Workshop: Microbeam Probes of Cellular Radiation Response, held at St. Catherine's College, University of Oxford, UK on March, 29th-31st, 2003. In 1993 the 4th LH Gray Workshop entitled ''Microbeam Probes of Cellular Radiation Response'' was held at the Gray Cancer Institute in Northwood. This was organized by Prof BD Michael, Dr M. Folkard and Dr KM Prise and brought together 40 participants interested in developing and applying new microbeam technology to problems in radiation biology (1). The workshop was an undoubted success and has spawned a series of subsequent workshops every two years. In the past, these workshops have been highly successful in bringing together groups interested in developing and applying micro-irradiation techniques to the study of cell and tissue damage by ionizing radiations. Following the first microbeam workshop, there has been a rapid growth in the number of centres developing radiobiology microbeams, or planning to do so and there are currently 15-20 worldwide. Much of the recent research using microbeams has used them to study low-dose effects and ''non-targeted'' responses such bystander effects, genomic instability and adaptive responses. The goal of the 6th workshop was to build on our knowledge of the development of microbeam approaches and the application to radiation biology in the future with the meeting stretching over a 3 day period. Over 80 participants reviewed the current state of radiobiology microbeam research worldwide and reported on new technological developments both in the fields of physics and biology

CHDS Sponsors Critical Infrastructure Protection Workshop

OpenAIRE

Center for Homeland Defense and Security

2008-01-01

Center for Homeland Defense and Security, PRESS RELEASES The NPS Center for Homeland Defense and Security in partnership with the U.S. Department of Homeland Security recently hosted its first Critical Infrastructure Protection Workshop. The workshop brought together practitioners and...

High-Penetration Photovoltaics Standards and Codes Workshop, Denver, Colorado, May 20, 2010: Workshop Proceedings

Energy Technology Data Exchange (ETDEWEB)

Coddington, M.; Kroposki, B.; Basso, T.; Lynn, K.; Herig, C.; Bower, W.

2010-09-01

Effectively interconnecting high-level penetration of photovoltaic (PV) systems requires careful technical attention to ensuring compatibility with electric power systems. Standards, codes, and implementation have been cited as major impediments to widespread use of PV within electric power systems. On May 20, 2010, in Denver, Colorado, the National Renewable Energy Laboratory, in conjunction with the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE), held a workshop to examine the key technical issues and barriers associated with high PV penetration levels with an emphasis on codes and standards. This workshop included building upon results of the High Penetration of Photovoltaic (PV) Systems into the Distribution Grid workshop held in Ontario California on February 24-25, 2009, and upon the stimulating presentations of the diverse stakeholder presentations.

Workshop I: Gender Studies

Science.gov (United States)

Hennessey, Eden; Kurup, Anitha; Meza-Montes, Lilia; Shastri, Prajval; Ghose, Shohini

2015-12-01

Participants in the Gender Studies workshop of the 5th IUPAP International Conference on Women in Physics discussed the gender question in science practice from a policy perspective, informed by investigations from the social science disciplines. The workshop's three sessions—"Equity and Education: Examining Gender Stigma in Science," "A Comparative Study of Women Scientists and Engineers: Experiences in India and the US," and "Toward Gender Equity Through Policy: Characterizing the Social Impact of Interventions—are summarized, and the resulting recommendations presented.

The second international workshop on enterprise security

OpenAIRE

Chang, V; Ramachandran, M; Yen, NN; Walters, RJ; Wills, G

2016-01-01

Welcome to our second international workshop on Enterprise Security as part of CloudCom 2015, Vancouver, Canada, November 30-December 3, 2015. The first international workshop held in Singapore has been a major success since then we have achieved greater team activities, research, and international collaborations as the major and significant outcome of our first workshop on this topic. Enterprise Security involves all business, products, governments, organization, and their contractors. This ...

Special workshop on lung dosimetry

International Nuclear Information System (INIS)

Fisher, D.R.

1983-01-01

A Special Workshop on Lung Dosimetry was convened in Salt Lake City, Utah, on April 21-22, 1982, to stimulate the use of improved radiation dosimetry and to formulate a stronger basis for dose-response relationships for inhaled radionuclides. The two-day workshop was held in conjunction with the 30th Annual Meeting of the Radiation Research Society. Publication is planned

Entrepreneurship Education: Workshops and Entrepreneurial Intentions

Science.gov (United States)

Pruett, Mark

2012-01-01

Using data collected from participants in an entrepreneurship education workshop series, the author examined the series' impact and tested a model of entrepreneurial intentions incorporating social and psychological factors. He found that entrepreneurial disposition and workshop participation significantly influenced intentions, exposure to role…

Cleanroom Energy Efficiency Workshop Proceedings

Energy Technology Data Exchange (ETDEWEB)

Tschudi, Bill

1999-03-15

On March 15, 1999, Lawrence Berkeley National Laboratory hosted a workshop focused on energy efficiency in Cleanroom facilities. The workshop was held as part of a multiyear effort sponsored by the California Institute for Energy Efficiency, and the California Energy Commission. It is part of a project that concentrates on improving energy efficiency in Laboratory type facilities including cleanrooms. The project targets the broad market of laboratory and cleanroom facilities, and thus cross-cuts many different industries and institutions. This workshop was intended to raise awareness by sharing case study success stories, providing a forum for industry networking on energy issues, contributing LBNL expertise in research to date, determining barriers to implementation and possible solutions, and soliciting input for further research.

Extreme Conditions Modeling Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Coe, Ryan Geoffrey [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Neary, Vincent Sinclair [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Lawon, Michael J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Yu, Yi-Hsiang [National Renewable Energy Lab. (NREL), Golden, CO (United States); Weber, Jochem [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2014-07-01

Sandia National Laboratories (SNL) and the National Renewable Energy Laboratory (NREL) hosted the Wave Energy Converter (WEC) Extreme Conditions Modeling (ECM) Workshop in Albuquerque, New Mexico on May 13–14, 2014. The objective of the workshop was to review the current state of knowledge on how to numerically and experimentally model WECs in extreme conditions (e.g. large ocean storms) and to suggest how national laboratory resources could be used to improve ECM methods for the benefit of the wave energy industry. More than 30 U.S. and European WEC experts from industry, academia, and national research institutes attended the workshop, which consisted of presentations from W EC developers, invited keynote presentations from subject matter experts, breakout sessions, and a final plenary session .

Waterloo Workshop on Computer Algebra

CERN Document Server

Zima, Eugene; WWCA-2016; Advances in computer algebra : in honour of Sergei Abramov's' 70th birthday

2018-01-01

This book discusses the latest advances in algorithms for symbolic summation, factorization, symbolic-numeric linear algebra and linear functional equations. It presents a collection of papers on original research topics from the Waterloo Workshop on Computer Algebra (WWCA-2016), a satellite workshop of the International Symposium on Symbolic and Algebraic Computation (ISSAC’2016), which was held at Wilfrid Laurier University (Waterloo, Ontario, Canada) on July 23–24, 2016.   This workshop and the resulting book celebrate the 70th birthday of Sergei Abramov (Dorodnicyn Computing Centre of the Russian Academy of Sciences, Moscow), whose highly regarded and inspirational contributions to symbolic methods have become a crucial benchmark of computer algebra and have been broadly adopted by many Computer Algebra systems.

Auroral Tomography Workshop, Proceedings

International Nuclear Information System (INIS)

Steen, Aa.

1993-08-01

In ionospheric and atmospheric physics the importance of multi-station imaging has grown as a consequence of the availability of scientific grade CCD cameras with digital output and affordable massive computing power. Tomographic inversion techniques are used in many different areas, e.g. medicine, plasma research and space physics. The tomography workshop was announced to gather a limited group of people interested in auroral tomography or tomographic inversion methods in general. ALIS (Auroral Large Imaging System) is a multi-station ground-based system developed primarily for three-dimensional auroral imaging, however other non-auroral objects can be studied with ALIS, e.g. stratospheric clouds. Several of the contributions in the workshop dealt with problems related to geometries similar to the ALIS-configuration. The Proceedings contain written contributions received either in abstract form or as full papers. The Proceedings also contain contributions intended for the Workshop but not presented due to the absence of the speaker. Separate abstracts have been prepared for 15 of the 17 papers

Grid and Entrepreneurship Workshop

CERN Multimedia

2006-01-01

The CERN openlab is organising a special workshop about Grid opportunities for entrepreneurship. This one-day event will provide an overview of what is involved in spin-off technology, with a special reference to the context of computing and data Grids. Lectures by experienced entrepreneurs will introduce the key concepts of entrepreneurship and review, in particular, the industrial potential of EGEE (the EU co-funded Enabling Grids for E-sciencE project, led by CERN). Case studies will be given by CEOs of European start-ups already active in the Grid and computing cluster area, and regional experts will provide an overview of efforts in several European regions to stimulate entrepreneurship. This workshop is designed to encourage students and researchers involved or interested in Grid technology to consider the entrepreneurial opportunities that this technology may create in the coming years. This workshop is organized as part of the CERN openlab student programme, which is co-sponsored by CERN, HP, ...

Compte-rendu de la journée d'étude de l'ATALA à Grenoble le 22 octobre 2004

Directory of Open Access Journals (Sweden)

Lionel Lamadon

2004-12-01

Full Text Available La journée d'étude de l'ATALA (Association pour le Traitement Automatique de la Langue s'est déroulée le 22 octobre 2004 à l'université Stendhal Grenoble 3 et avait pour thème : TAL et apprentissage des langues. Cette journée était organisée par le LIDILEM (Laboratoire de Linguistique et Didactique des Langues Étrangères et Maternelles de l'université Stendhal, sous l'égide de l'ATALA et avec le soutien de XRCE (Xerox Research Centre Europe et du projet européen Thetis. Un nombre important de soumissions a permis d'emblée de mesurer l'intérêt suscité par le thème de cette journée. Au final, dix articles ont été sélectionnés pour une présentation orale ainsi que quatre articles pour la session posters. Autour de la thématique générale des liens entre le TAL (Traitement Automatique de la Langue et l'ALAO (Apprentissage des Langues Assisté par Ordinateur, les intervenants ont présenté différents axes de recherche permettant de mieux cerner les enjeux de l'intégration d'outils de TAL dans des environnements informatiques d'aide à l'apprentissage.

Thirteenth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Brigham, W.E.; Miller, F.G.; Cook, J.W. (Stanford Geothermal Program)

1988-01-21

PREFACE The Thirteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 19-21, 1988. Although 1987 continued to be difficult for the domestic geothermal industry, world-wide activities continued to expand. Two invited presentations on mature geothermal systems were a keynote of the meeting. Malcolm Grant presented a detailed review of Wairakei, New Zealand and highlighted plans for new development. G. Neri summarized experience on flow rate decline and well test analysis in Larderello, Italy. Attendance continued to be high with 128 registered participants. Eight foreign countries were represented: England, France, Iceland, Italy, New Zealand, Japan, Mexico and The Philippines. A discussion of future workshops produced a strong recommendation that the Stanford Workshop program continue for the future. There were forty-one technical presentations at the Workshop. All of these are published as papers in this Proceedings volume. Four technical papers not presented at the Workshop are also published. In addition to these forty five technical presentations or papers, the introductory address was given by Henry J. Ramey, Jr. from the Stanford Geothermal Program. The Workshop Banquet speaker was Gustavo Calderon from the Inter-American Development Bank. We thank him for sharing with the Workshop participants a description of the Bank???s operations in Costa Rica developing alternative energy resources, specifically Geothermal, to improve the country???s economic basis. His talk appears as a paper in the back of this volume. The chairmen of the technical sessions made an important contribution to the workshop. Other than Stanford faculty members they included: J. Combs, G. T. Cole, J. Counsil, A. Drenick, H. Dykstra, K. Goyal, P. Muffler, K. Pruess, and S. K. Sanyal. The Workshop was organized by the Stanford Geothermal Program faculty, staff and students. We would like to thank Marilyn King, Pat Oto, Terri Ramey, Bronwyn Jones

Exploring Programmatic Interoperability: Army Future Force Workshop

National Research Council Canada - National Science Library

Smith , II., James D; Meyers, B. C

2005-01-01

.... It describes the background and motivation for the workshop, provides a brief overview of the workshop activities, and highlights the key observations and conclusions obtained through the course...

Computational Fluid Dynamics (CFD) for Nuclear Reactor Safety Applications - Workshop Proceedings, CFD4NRS-3 - Experimental Validation and Application of CFD and CMFD Codes to Nuclear Reactor Safety Issues

International Nuclear Information System (INIS)

2012-01-01

The purpose of the workshop was to provide a forum for numerical analysts and experimentalists to exchange information in the field of NRS-related activities relevant to CFD validation, with the objective of providing input to WGAMA CFD experts to create a practical, state-of-the-art, web-based assessment matrix on the use of CFD for NRS applications. The workshop included single-phase and multiphase CFD applications as well as new experimental techniques, including the following: Single-phase and two-phase CFD simulations with an emphasis on validation were sought in areas such as boiling flows, free-surface flows, direct contact condensation, and turbulent mixing. These should relate to NRS-relevant issues such as pressurized thermal shock, critical heat flux, pool heat exchangers, boron dilution, hydrogen distribution, and thermal striping. The use of systematic error quantification and Best Practice Guidelines (BPGs) was encouraged. Experiments providing data suitable for CFD validation-specifically in the area of NRS-including local measurement devices such as multi-sensor optical or electrical probes, Laser Doppler Velocimetry (LDV), hot-film/wire anemometry, Particle Image Velocimetry (PIV), Laser-Induced Fluorescence (LIF), and other innovative techniques. There were over 200 registered participants at the CFD4NRS-3 workshop. The program consisted of about 75 technical papers. Of these, 57 were oral presentations and 19 were posters. An additional 20 posters related to the OECD/NEA-sponsored CFD benchmark exercise on thermal fatigue in a T-Junction were presented. In addition, five keynote lectures were given by distinguished experts. This is about a 30 pc increase with respect to the previous XCFD4NRS workshop held in Grenoble in 2008, and a 70 pc increase compared to the first CFD4NRS workshop held in Garching in 2006. This confirms that there is a real and growing need for such workshops. The papers presented in the conference tackled different topics

IAEA monitoring field trials workshop

International Nuclear Information System (INIS)

Ross, H.H.; Cooley, J.N.; Belew, W.L.

1995-01-01

Recent safeguards inspections in Iraq and elsewhere by the International Atomic Energy Agency (IAEA) have led to the supposition that environmental monitoring can aid in verifying declared and in detecting undeclared nuclear activities or operations. This assumption was most recently examined by the IAEA's Standing Advisory Group on Safeguards Implementation (SAGSI), in their reports to the IAEA Board of Governors. In their reports, SAGSI suggested that further assessment and development of environmental monitoring would be needed to fully evaluate its potential application to enhanced IAEA safeguards. Such an inquiry became part of the IAEA ''Programme 93+2'' assessment of measures to enhance IAEA safeguards. In March, 1994, the International Safeguards Group at Oak Ridge hosted an environmental monitoring field trial workshop for IAEA inspectors to train them in the techniques needed for effective environmental sampling. The workshop included both classroom lectures and actual field sampling exercises. The workshop was designed to emphasize the analytical infrastructure needed for an environmental program, practical sampling methods, and suggested procedures for properly planning a sampling campaign. Detailed techniques for swipe, vegetation, soil, biota, and water associated sampling were covered. The overall approach to the workshop, and observed results, are described

Impressions from the 3rd Nordcode Seminar & Workshop

DEFF Research Database (Denmark)

Lenau, Torben Anker; Boelskifte, Per; Hansen, Claus Thorp

2005-01-01

This paper summarises the purpose and contents of the 3rd Nordcode Seminar and Workshop. First, the workshop assignments are described. Second, the paper briefly presents the topics of the keynote speeches and all presentations of the working papers that took place in the seminar.......This paper summarises the purpose and contents of the 3rd Nordcode Seminar and Workshop. First, the workshop assignments are described. Second, the paper briefly presents the topics of the keynote speeches and all presentations of the working papers that took place in the seminar....

How to put on an ANS teachers' workshop

International Nuclear Information System (INIS)

Besmann, T.M.

1991-01-01

One of the most successful public outreach programs organized by the American Nuclear Society (ANS) has been the teachers' workshops. They are so highly thought of that a national meeting is considered incomplete without an attendant workshop. The workshops are also included in topical meetings, and a number are simply organized by local sections with no connection to a technical meeting. The accumulated experience with these workshops has now matured to where a set of reasonable guidelines can be established, although there are no guarantees of success or hard and fast rules

PREFACE: EMAS 2013 Workshop: 13th European Workshop on Modern Developments and Applications in Microbeam Analysis

Science.gov (United States)

Llovet, Xavier, Dr; Matthews, Mr Michael B.; Brisset, François, Dr; Guimarães, Fernanda, Dr; Vieira, Professor Joaquim M., Dr

2014-03-01

This volume of the IOP Conference Series: Materials Science and Engineering contains papers from the 13th Workshop of the European Microbeam Analysis Society (EMAS) on Modern Developments and Applications in Microbeam Analysis which took place from the 12th to the 16th of May 2013 in the Centro de Congressos do Alfândega, Porto, Portugal. The primary aim of this series of workshops is to assess the state-of-the-art and reliability of microbeam analysis techniques. The workshops also provide a forum where students and young scientists starting out on a career in microbeam analysis can meet and discuss with the established experts. The workshops have a very specific format comprising invited plenary lectures by internationally recognized experts, poster presentations by the participants and round table discussions on the key topics led by specialists in the field. This workshop was organized in collaboration with LNEG - Laboratório Nacional de Energia e Geologia and SPMICROS - Sociedade Portuguesa de Microscopia. The technical programme included the following topics: electron probe microanalysis, future technologies, electron backscatter diffraction (EBSD), particle analysis, and applications. As at previous workshops there was also a special oral session for young scientists. The best presentation by a young scientist was awarded with an invitation to attend the 2014 Microscopy and Microanalysis meeting at Hartford, Connecticut. The prize went to Shirin Kaboli, of the Department of Metals and Materials Engineering of McGill University (Montréal, Canada), for her talk entitled ''Plastic deformation studies with electron channelling contrast imaging and electron backscattered diffraction''. The continuing relevance of the EMAS workshops and the high regard in which they are held internationally can be seen from the fact that 74 posters from 21 countries were on display at the meeting and that the participants came from as far away as Japan, Canada and the USA. A

Customer/User Workshops in Product development

DEFF Research Database (Denmark)

Brandt, Eva; Binder, Thomas

1997-01-01

In a recent product development project, we have taken part in establishing and organising a series of workshops with a group of customers/users of a future product line through out the development project. The workshops is a kind of informal meetingplace for engineering, marketing, customers...... and discuss experiences with this kind of collaborative fora. We have tried to demonstrate that having an on-going dialogue with users/customers also during detailed design in not only a means to keep 'the voive of the customer alive'. We have found that the workshops have an important impact on securing...

Workshop on accelerator magnet superconductors. Proceedings

International Nuclear Information System (INIS)

2004-01-01

The workshop on accelerator magnet superconductors has gathered 102 registered participants from research laboratories, universities and industry. 8 European companies, active in superconducting materials and cables were present. This workshop has been organized to deal with the status of the world research and development on superconducting materials and cables for high field magnets (B > 10 T). The workshop has also reviewed the status of high temperature superconductors and transmission line cables for potential use in low field superconducting magnets for injectors and beam transfer lines, as well as cables for pulsed magnets that might be used in future hadron colliders or injectors

Workshop on accelerator magnet superconductors. Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

The workshop on accelerator magnet superconductors has gathered 102 registered participants from research laboratories, universities and industry. 8 European companies, active in superconducting materials and cables were present. This workshop has been organized to deal with the status of the world research and development on superconducting materials and cables for high field magnets (B > 10 T). The workshop has also reviewed the status of high temperature superconductors and transmission line cables for potential use in low field superconducting magnets for injectors and beam transfer lines, as well as cables for pulsed magnets that might be used in future hadron colliders or injectors.

WWER-1000 reactor simulator. Workshop material

International Nuclear Information System (INIS)

2003-01-01

The International Atomic Energy Agency (IAEA) has established an activity in nuclear reactor simulation computer programs to assist its Member States in education. The objective is to provide, for a variety of advanced reactor types, insight and practice in their operational characteristics and their response to perturbations and accident situations. To achieve this, the IAEA arranges for the development and distribution of simulation programs and educational material and sponsors courses and workshops. The workshops are in two parts: techniques and tools for reactor simulator development; and the use of reactor simulators in education. Workshop material for the first part is covered in the IAEA publication: Training Course Series 12, 'Reactor Simulator Development' (2001). Course material for workshops using a pressurized water reactor (PWR) Simulator developed for the IAEA by Cassiopeia Technologies Inc. of Canada is presented in the IAEA publication: Training Course Series No. 22 'Pressurized Water Reactor Simulator' (2003) and Training Course Series No. 23 'Boiling Water Reactor Simulator' (2003). This report consists of course material for workshops using the WWER-1000 Reactor Department Simulator from the Moscow Engineering and Physics Institute, Russian Federation. N. V. Tikhonov and S. B. Vygovsky of the Moscow Engineering and Physics Institute prepared this report for the IAEA

Proceedings of the second data acquisition system workshop

International Nuclear Information System (INIS)

Ohska, T.K.

1988-02-01

The second data acquisition system workshop was held on July 18 and 19, 1986 at the National Laboratory for High Energy Physics (KEK). The organizers had one thing in mind when this workshop was planned. It was wanted to make a record of mistakes in designing and building the electronic system. The time when this workshop was held was just before the completion of the TRISTAN detectors when everyone was very busy. Brilliant achievements have been published every year in the world, but the hard earned experience on what should not be done does not appear on publication. To record it while it is still hot was the basic motivation of this workshop. More than 100 people attended the workshop, and some speakers did excellently what the organizers hoped to do, but some talked on their great achievements only. The organizers are very thankful to everybody who helped before, during and after the workshop. If possible, it should be asked all speakers to hand in their write-ups on the day of the workshop. Actually, the last write-up was received almost one year late, and the publication of this report delayed. In this book, those write-ups are collected. (Kako, I.)

12th Advanced Accelerator Concept (AAC 2006) Workshop

International Nuclear Information System (INIS)

Piot, Philippe

2006-01-01

Summary of the 12th Advanced Accelerator Concept (AAC 2006) Workshop help by NIU and ANL on July 10th-15th 2006 in Lake Geneva WI. The proceedings of the workshop have been published as an AIP conference proceedings '12th Advanced Accelerator Concepts Workshop' volume 877. The Twelfth Workshop on Advanced Accelerator Concepts was held at the Grand Geneva Resort in Lake Geneva, Wisconsin, from July 10 to July 15, 2006. The Workshop was sponsored by the High Energy Physics program of the U.S. Department of Energy, and was hosted by the Argonne Wakefield Accelerator Group (AWA) of Argonne National Laboratory and by Northern Illinois University. The workshop is a bi-annual meeting among physicist working on novel charged particle acceleration concept. The name 'advanced accelerator' physics covers long term research and development in beam physics and accelerator technologies. Some of the topics in advanced accelerator R and D are laser acceleration of electrons, wake field acceleration, novel high power rf source, new beam diagnostics, free-electron lasers, generating high brightness electron beams etc. The Advanced Accelerator Concept workshop is the only acknowledged and fully sponsored forum that provides a platform for inter- and cross-disciplinary discussion on various aspects of advanced accelerator and beam physics/technology concepts.

1995 second modulator-klystron workshop: A modulator-klystron workshop for future linear colliders

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

This second workshop examined the present state of modulator design and attempted an extrapolation for future electron-positron linear colliders. These colliders are currently viewed as multikilometer-long accelerators consisting of a thousand or more RF sources with 500 to 1,000, or more, pulsed power systems. The workshop opened with two introductory talks that presented the current approaches to designing these linear colliders, the anticipated RF sources, and the design constraints for pulse power. The cost of main AC power is a major economic consideration for a future collider, consequently the workshop investigated efficient modulator designs. Techniques that effectively apply the art of power conversion, from the AC mains to the RF output, and specifically, designs that generate output pulses with very fast rise times as compared to the flattop. There were six sessions that involved one or more presentations based on problems specific to the design and production of thousands of modulator-klystron stations, followed by discussion and debate on the material.

Are there priority competencies for preparation of accountants?: A study about Brazilian accountants ¿Existen competencias que deben ser prioridad en el desarrollo del contador?: Un estudio sobre los contadores Existem competências a serem priorizadas no desenvolvimento do contador?: Um estudo sobre os contadores brasileiros

OpenAIRE

Ricardo Lopes Cardoso; Edson Luiz Riccio

2010-01-01

This study sought to determine the need for priority of competencies in preparation of accountants as well as variations between men and women. This question is motivated by Hardern (1995), Morgan (1997), Moramed and Lashine (2003)and IFAC (2003) with a theoretical foundation of competencies related to McClelland (1973, 1998) and Boyatzis (1982). Professional references are Hardern (1995), AICPA (1999) and IFAC (2003). It was based on 18 competencies that were collected from 24 articles for q...

Dreissenid mussel research priorities workshop

Science.gov (United States)

Sytsma, Mark; Phillips, Stephen; Counihan, Timothy D.

2015-01-01

Currently, dreissenid mussels have yet to be detected in the northwestern part of the United States and western Canada. Infestation of one of the jurisdictions within the mussel-free Pacific Northwest would likely have significant economic, soci­etal and environmental implications for the entire region. Understanding the biology and environmental tolerances of dreissenid mussels, and effectiveness of various man­agement strategies, is key to prevention.On November 4-5, 2015, the Aquatic Bioinvasion Research and Policy Institute and the Center for Lakes and Reservoirs at Portland State University, the US Geological Survey, and the Pacific States Marine Fisheries Commission, convened a Dreissenid Mussel Research Priorities Workshop funded by the Great Northern Landscape Conservation Cooperative. The purpose of the workshop was to review dreissenid research priorities in the 2010 Quagga-Zebra Mussel Action Plan for Western U.S. Waters, reassess those priorities, incorporate new information and emerging trends, and develop priorities to strategically focus research efforts on zebra and quagga mussels in the Pacific Northwest and ensure that future research is focused on the highest priorities. It is important to note that there is some repetition among dreissenid research priority categories (e.g., prevention, detection, control, monitoring, and biology).Workshop participants with research experience in dreissenid mussel biology and management were identified by a literature review. State and federal agency managers were also invited to the workshop to ensure relevancy and practicality of the work­shop outcomes. A total of 28 experts (see sidebar) in mussel biology, ecology, and management attended the workshop.

Midwest Transmission Workshop II Summary

Energy Technology Data Exchange (ETDEWEB)

Kevin Bryan

2002-12-05

OAK-B135 After introductions of all participants, Abby Arnold, RESOLVE, reviewed the purpose of the meeting and the agenda. The purpose of the workshop was to share the results of the Midwest Independent System Operator (MISO) scenario development for wind and other fuel sources and the corresponding implications for transmission throughout the MISO control area. The workshop agenda is included in Attachment A.

3. Halden Reactor Project Workshop

International Nuclear Information System (INIS)

Louka, Michael N.

2005-09-01

A workshop was held in Halden 2nd-3rd March 2005 to discuss 'VR in the Future Industrial Workplace: Working Together - Regardless of Distance'. The workshop sessions and discussions focused on design, operations and maintenance, training, and engineering virtual reality systems, and provided useful insights into the current state of the art of research and development in the fields of virtual and augmented reality. (Author)

Cyber Mutual Assistance Workshop Report

Science.gov (United States)

2018-02-01

Threat Intelligence 19 2.13 Industry Forums and Groups 20 2.14 Cybersecurity Vendors 20 3 Conclusions and Recommendations 22 Appendix A List of...establishing reliable situational awareness from an OT per- spective, from manual change analysis to machine learning or artificial intelligence . From a...dark web, or following cybersecurity -related news. Workshop members identified other threat intelligence collection sources during the workshop, which

Controladuría como Instrumento de Gobernanza en el Sector Público

Directory of Open Access Journals (Sweden)

Márcia Martins Mendes De Luca

2013-03-01

Full Text Available La Controladuría es considerada un instrumento de Gobernanza Corporativa, en la medida en que puede contribuir para la reducción de la asimetría informacional y de conflictos de intereses, derivados de los problemas de agencia entre propietarios y gestores de las organizaciones, por medio de la puesta a disposición de informaciones que posibiliten la evaluación de la entidad y la verificación del alcance de sus objetivos. La transparencia y la accountability son pilares básicos tanto de la Gobernanza Corporativa como de la Controladuría. El Comité del Sector Público (PSC de la Federación Internacional de Contadores (IFAC desarrolló un estudio sobre gobernanza para el contexto público, teniendo en cuenta que los principios de gobernanza deberían estar presentes en las entidades públicas reflejados en cuatro dimensiones, dos de las cuales se refieren al control y a la puesta a disposición de informes externos Federación Internacional de los Contadores [IFAC] (2001. La presente pesquisa tiene como principal objetivo identificar qué informaciones puestas a disposición por la Controladuría General de la Unión (CGU, en su portal electrónico, atienden al tipo y al contenido de las recomendaciones de la IFAC referentes al control y a los informes externos, en tanto dimensiones de gobernanza en el sector público. Por medio de pesquisa bibliográfica y documental, fue constatado que solamente las informaciones referentes a los informes presupuestarios y financieros atienden al tipo y al contenido recomendado por la IFAC. La pesquisa reveló asimismo que informaciones relacionadas a la auditoría interna y a la prestación de cuentas anual del Gobierno contemplan parcialmente el contenido recomendado por la IFAC.

Controladuría como Instrumento de Gobernanza en el Sector Público

Directory of Open Access Journals (Sweden)

Mônica Clark Nunes Cavalcante

2013-01-01

Full Text Available La Controladuría es considerada un instrumento de Gobernanza Corporativa, en la medida en que puede contribuir para la reducción de la asimetría informacional y de conflictos de intereses, derivados de los problemas de agencia entre propietarios y gestores de las organizaciones, por medio de la puesta a disposición de informaciones que posibiliten la evaluación de la entidad y la verificación del alcance de sus objetivos. La transparencia y la accountability son pilares básicos tanto de la Gobernanza Corporativa como de la Controladuría. El Comité del Sector Público (PSC de la Federación Internacional de Contadores (IFAC desarrolló un estudio sobre gobernanza para el contexto público, teniendo en cuenta que los principios de gobernanza deberían estar presentes en las entidades públicas reflejados en cuatro dimensiones, dos de las cuales se refieren al control y a la puesta a disposición de informes externos Federación Internacional de los Contadores [IFAC] (2001. La presente pesquisa tiene como principal objetivo identificar qué informaciones puestas a disposición por la Controladuría General de la Unión (CGU, en su portal electrónico, atienden al tipo y al contenido de las recomendaciones de la IFAC referentes al control y a los informes externos, en tanto dimensiones de gobernanza en el sector público. Por medio de pesquisa bibliográfica y documental, fue constatado que solamente las informaciones referentes a los informes presupuestarios y financieros atienden al tipo y al contenido recomendado por la IFAC. La pesquisa reveló asimismo que informaciones relacionadas a la auditoría interna y a la prestación de cuentas anual del Gobierno contemplan parcialmente el contenido recomendado por la IFAC.

Controladoria como Instrumento de Governança no Setor Público

Directory of Open Access Journals (Sweden)

Mônica Clark Nunes Cavalcante

2013-03-01

Full Text Available A Controladoria é considerada um instrumento de Governança Corporativa, na medida em que pode contribuir para a redução da assimetria informacional e de conflitos de interesses, decorrentes dos problemas de agência entre proprietários e gestores das organizações, por meio da disponibilização de informações que possibilitem a avaliação da entidade e a verificação do alcance dos seus objetivos. A transparência e a accountability são pilares básicos tanto da Governança Corporativa quanto da Controladoria. O Comitê do Setor Público (PSC da Federação Internacional de Contadores (IFAC desenvolveu estudo sobre governança para o contexto público, levando em conta que os princípios de governança deveriam estar presentes nas entidades públicas refletidos em quatro dimensões, duas das quais se referem ao controle e à disponibilização de relatórios externos Federação Internacional dos Contadores [IFAC] (2001. A presente pesquisa tem como principal objetivo identificar quais informações disponibilizadas pela Controladoria Geral da União (CGU, em seu portal eletrônico, atendem ao tipo e ao conteúdo das recomendações da IFAC referentes ao controle e aos relatórios externos, enquanto dimensões de governança no setor público. Por meio de pesquisa bibliográfica e documental, constatou-se que apenas as informações referentes aos relatórios orçamentários e financeiros atendem ao tipo e ao conteúdo recomendado pela IFAC. A pesquisa revelou ainda que informações relacionadas à auditoria interna e à prestação de contas anual do Governo contemplam parcialmente o conteúdo recomendado pela IFAC.

Accelerator reliability workshop

International Nuclear Information System (INIS)

Hardy, L.; Duru, Ph.; Koch, J.M.; Revol, J.L.; Van Vaerenbergh, P.; Volpe, A.M.; Clugnet, K.; Dely, A.; Goodhew, D.

2002-01-01

About 80 experts attended this workshop, which brought together all accelerator communities: accelerator driven systems, X-ray sources, medical and industrial accelerators, spallation sources projects (American and European), nuclear physics, etc. With newly proposed accelerator applications such as nuclear waste transmutation, replacement of nuclear power plants and others. Reliability has now become a number one priority for accelerator designers. Every part of an accelerator facility from cryogenic systems to data storage via RF systems are concerned by reliability. This aspect is now taken into account in the design/budget phase, especially for projects whose goal is to reach no more than 10 interruptions per year. This document gathers the slides but not the proceedings of the workshop

Accelerator reliability workshop

Energy Technology Data Exchange (ETDEWEB)

Hardy, L; Duru, Ph; Koch, J M; Revol, J L; Van Vaerenbergh, P; Volpe, A M; Clugnet, K; Dely, A; Goodhew, D

2002-07-01

About 80 experts attended this workshop, which brought together all accelerator communities: accelerator driven systems, X-ray sources, medical and industrial accelerators, spallation sources projects (American and European), nuclear physics, etc. With newly proposed accelerator applications such as nuclear waste transmutation, replacement of nuclear power plants and others. Reliability has now become a number one priority for accelerator designers. Every part of an accelerator facility from cryogenic systems to data storage via RF systems are concerned by reliability. This aspect is now taken into account in the design/budget phase, especially for projects whose goal is to reach no more than 10 interruptions per year. This document gathers the slides but not the proceedings of the workshop.

Second Greenhouse Gas Information System Workshop

Science.gov (United States)

Boland, S. W.; Duren, R. M.; Mitchiner, J.; Rotman, D.; Sheffner, E.; Ebinger, M. H.; Miller, C. E.; Butler, J. H.; Dimotakis, P.; Jonietz, K.

2009-12-01

The second Greenhouse Gas Information System (GHGIS) workshop was held May 20-22, 2009 at the Sandia National Laboratories in Albuquerque, New Mexico. The workshop brought together 74 representatives from 28 organizations including U.S. government agencies, national laboratories, and members of the academic community to address issues related to the understanding, operational monitoring, and tracking of greenhouse gas emissions and carbon offsets. The workshop was organized by an interagency collaboration between NASA centers, DOE laboratories, and NOAA. It was motivated by the perceived need for an integrated interagency, community-wide initiative to provide information about greenhouse gas sources and sinks at policy-relevant temporal and spatial scales in order to significantly enhance the ability of national and regional governments, industry, and private citizens to implement and evaluate effective climate change mitigation policies. This talk provides an overview of the second Greenhouse Gas Information System workshop, presents its key findings, and discusses current status and next steps in this interagency collaborative effort.

The 3d International Workshop on Computational Electronics

Science.gov (United States)

Goodnick, Stephen M.

1994-09-01

The Third International Workshop on Computational Electronics (IWCE) was held at the Benson Hotel in downtown Portland, Oregon, on May 18, 19, and 20, 1994. The workshop was devoted to a broad range of topics in computational electronics related to the simulation of electronic transport in semiconductors and semiconductor devices, particularly those which use large computational resources. The workshop was supported by the National Science Foundation (NSF), the Office of Naval Research and the Army Research Office, as well as local support from the Oregon Joint Graduate Schools of Engineering and the Oregon Center for Advanced Technology Education. There were over 100 participants in the Portland workshop, of which more than one quarter represented research groups outside of the United States from Austria, Canada, France, Germany, Italy, Japan, Switzerland, and the United Kingdom. There were a total 81 papers presented at the workshop, 9 invited talks, 26 oral presentations and 46 poster presentations. The emphasis of the contributions reflected the interdisciplinary nature of computational electronics with researchers from the Chemistry, Computer Science, Mathematics, Engineering, and Physics communities participating in the workshop.

Workshop: High-performance coatings for internal combustion engines; Workshop: Hochleistungsschichten fuer Verbrennungsmotoren

Energy Technology Data Exchange (ETDEWEB)

Blau, W. [Foerdergemeinschaft Duenne Schichten e.V., Dresden (Germany). Transferzentrum Oberflaechen- und Schichttechnologie; Lugscheider, E. [Technische Hochschule Aachen (Germany). Lehr- und Forschungsgebiet Werkstoffwissenschaften; Suchentrunk, R. (comps.) [DaimlerChrysler Aerospace AG (Dasa), Muenchen (Germany)

1999-07-01

Progress in vehicles is closely related to progress in materials. Engine components must withstand high thermal, corrosive and mechanical loads. The workshop focused on the coating and boundary layer treatment of components especially of piston engines, although gas turbine technology was gone into as well. [German] Fortschritte in der Verkehrstechnik sind oft eng mit Fortschritten in der Werkstofftechnik verknuepft. Besonders hoch sind die Anforderungen hinsichtlich thermischer, korrosiver und mechanischer Belastbarkeit bei Bauteilen von Verbrennungsmotoren. Der Workshop widmet sich ausschliesslich dem Teilgebiet die Beschichtung und Randschichtbehandlung von Bauteilen. Kolbenmotoren stehen im Mittelpunkt, Querverbindungen zur Gasturbinentechnik werden angesprochen. (orig./AKF)

Replacing Lecture with Peer-led Workshops Improves Student Learning

OpenAIRE

Preszler, Ralph W.

2009-01-01

Peer-facilitated workshops enhanced interactivity in our introductory biology course, which led to increased student engagement and learning. A majority of students preferred attending two lectures and a workshop each week over attending three weekly lectures. In the workshops, students worked in small cooperative groups as they solved challenging problems, evaluated case studies, and participated in activities designed to improve their general learning skills. Students in the workshop versio...

Cyanotype: Workshops for people with early dementia

OpenAIRE

Moreno Sáez, María del Carmen; Gutiérrez-Párraga, Teresa; Saavedra Macías, Francisco Javier (Coordinador); Español Nogueiro, Alicia (Coordinador); Arias Sánchez, Samuel (Coordinador); Calderón García, Marina (Coordinador)

2017-01-01

The workshop "Cyanotype: Workshops for people with early dementia", carried out at the 5th International Conference on Health Humanities introduced the cyanotype. The cyanotype is a 19th century photographic technique that the research project used as a way for preventing the decline of faculties of people living with diseases that provoke memory loss. The activities carried out in the cyanotype workshop at the Conference were based on the creation of photographic images that could be interve...

Photovoltaic performance and reliability workshop

Energy Technology Data Exchange (ETDEWEB)

Mrig, L. [ed.

1993-12-01

This workshop was the sixth in a series of workshops sponsored by NREL/DOE under the general subject of photovoltaic testing and reliability during the period 1986--1993. PV performance and PV reliability are at least as important as PV cost, if not more. In the US, PV manufacturers, DOE laboratories, electric utilities, and others are engaged in the photovoltaic reliability research and testing. This group of researchers and others interested in the field were brought together to exchange the technical knowledge and field experience as related to current information in this evolving field of PV reliability. The papers presented here reflect this effort since the last workshop held in September, 1992. The topics covered include: cell and module characterization, module and system testing, durability and reliability, system field experience, and standards and codes.

H2@Scale Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Pivovar, Bryan

2017-03-31

Final report from the H2@Scale Workshop held November 16-17, 2016, at the National Renewable Energy Laboratory in Golden, Colorado. The U.S. Department of Energy's National Renewable Energy Laboratory hosted a technology workshop to identify the current barriers and research needs of the H2@Scale concept. H2@Scale is a concept regarding the potential for wide-scale impact of hydrogen produced from diverse domestic resources to enhance U.S. energy security and enable growth of innovative technologies and domestic industries. Feedback received from a diverse set of stakeholders at the workshop will guide the development of an H2@Scale roadmap for research, development, and early stage demonstration activities that can enable hydrogen as an energy carrier at a national scale.

Genetic Engineering Workshop Report, 2010

Energy Technology Data Exchange (ETDEWEB)

Allen, J; Slezak, T

2010-11-03

The Lawrence Livermore National Laboratory (LLNL) Bioinformatics group has recently taken on a role in DTRA's Transformation Medical Technologies (TMT) program. The high-level goal of TMT is to accelerate the development of broad-spectrum countermeasures. To achieve this goal, there is a need to assess the genetic engineering (GE) approaches, potential application as well as detection and mitigation strategies. LLNL was tasked to coordinate a workshop to determine the scope of investments that DTRA should make to stay current with the rapid advances in genetic engineering technologies, so that accidental or malicious uses of GE technologies could be adequately detected and characterized. Attachment A is an earlier report produced by LLNL for TMT that provides some relevant background on Genetic Engineering detection. A workshop was held on September 23-24, 2010 in Springfield, Virginia. It was attended by a total of 55 people (see Attachment B). Twenty four (44%) of the attendees were academic researchers involved in GE or bioinformatics technology, 6 (11%) were from DTRA or the TMT program management, 7 (13%) were current TMT performers (including Jonathan Allen and Tom Slezak of LLNL who hosted the workshop), 11 (20%) were from other Federal agencies, and 7 (13%) were from industries that are involved in genetic engineering. Several attendees could be placed in multiple categories. There were 26 attendees (47%) who were from out of the DC area and received travel assistance through Invitational Travel Orders (ITOs). We note that this workshop could not have been as successful without the ability to invite experts from outside of the Beltway region. This workshop was an unclassified discussion of the science behind current genetic engineering capabilities. US citizenship was not required for attendance. While this may have limited some discussions concerning risk, we felt that it was more important for this first workshop to focus on the scientific state of

Proceedings and findings of the geothermal commercialization workshop

Energy Technology Data Exchange (ETDEWEB)

Anderson, J.; Dhillon, H.

1979-04-01

The proceedings are presented of a Geothermal Commercialization Workshop conducted by the Division of Geothermal Resource Management, Department of Energy. The workshop was held in January-February 1979 at The MITRE Corporation facility in McLean, Virginia. The workshop addressed geothermal hydrothermal commercialization achievements and needs in the areas of Marketing and Outreach, Economics, Scenarios, and Progress Monitoring.

Collaborative Co-Design for Library Workshops

Science.gov (United States)

Roberts, Regina Lee; Taormina, Mattie

2013-01-01

This article describes a year-long application of critical information literacy theory for social-science-related library workshops. Each of these workshops had a customized section that included working with special collections and university archives. The students who participated ranged from incoming freshman to seniors at Stanford University.…

The Future Workshop: Democratic problem solving

DEFF Research Database (Denmark)

Vidal, Rene Victor Valqui

2005-01-01

The origins, principles and practice of a very popular method known as The Future Workshop are presented. The fundamental theory and principles of this method are presented in an introductory way. In addition, practical guidelines to carry out such a workshop are outlined and several types of app...

Mars Exploration Study Workshop II. Report of a workshop, Ames Research Center, Moffett Field, CA (USA), 24 - 25 May 1993.

Science.gov (United States)

Duke, M. B.; Budden, N. A.

1993-11-01

This report, which summarizes the Mars Exploration Study Workshop II, provides an overview of the status of the Mars Exploration Study, material presented at the workshop, and discussions of open items being addressed by the study team. The workshop assembled three teams of experts to discuss cost, dual-use technology, and international involvement, and to generate a working group white paper addressing these issues.

Workshop on CEBAF at higher energies

Energy Technology Data Exchange (ETDEWEB)

Isgur, N.; Stoler, P. [eds.

1994-04-01

Since the current parameters of CEBAF were defined almost a decade ago, there has been a remarkably fruitful evolution of our picture of the behavior of strongly interacting matter that apparently could be addressed by CEBAF at higher energies. Favorable technical developments coupled with foresight in initial laboratory planning have now made it feasible to consider approximately doubling CEBAF`s current design energy of 4 GeV to approach 10 GeV at rather modest cost. The purpose of the workshop, sponsored by the CEBAF User Group, was to begin to develop the next phase of CEBAF`s program by giving the entire community the opportunity to participate in defining the future of our field, and in particular the physics accessible with an upgraded CEBAF energy. It is intended that this report mark the first step toward an ultimate goal of defining a physics program that will form the basis for an upgrade of CEBAF. The report begins with a brief overview of the workshop`s conclusions. Its body consists of sections corresponding to the workshop`s Working Groups on Hadron Spectroscopy and Production, High Q{sup 2} Form Factors and Exclusive Reactions, Inclusive and Semi-Inclusive Processes, and Hadrons in the Nuclear Medium. Each section begins with the working group summaries and is followed by associated plenary talks summarizing the outstanding physics issues addressable by an upgrade, which are in turn followed by individual contributions presenting specific physics programs. An appendix describes capabilities of CEBAF`s current experimental equipment at higher energies; another appendix lists workshop participants. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

Proceedings of the CEATI 2010 distribution planning workshop

International Nuclear Information System (INIS)

2010-01-01

This workshop provided a forum for electrical industry distribution experts to discuss methods of distribution planning that will ensure the provision of low-cost and reliable electrical service to present and future customers. Participants in the workshop discussed methods of integrating renewable energy resources, maximizing the use of existing assets, and reducing the carbon footprint of electric utilities. The effects of new loads on reliability, power quality, and voltage stability were considered. Planning distribution system modifications for the future were reviewed. The workshop provided an overview of distribution planning in relation to smart grids. The workshop included sessions on distribution planning for the 21. century; planning for a smarter grid; integrating renewable energy into the distribution system; and planning to manage reliability. The workshop featured 22 presentations, of which 16 have been catalogued separately for inclusion in this database. tabs., figs.

Eleventh workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Counsil, J.R. (Stanford Geothermal Program)

1986-01-23

The Eleventh Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 21-23, 1986. The attendance was up compared to previous years, with 144 registered participants. Ten foreign countries were represented: Canada, England, France, Iceland, Indonesia, Italy, Japan, Mexico, New Zealand and Turkey. There were 38 technical presentations at the Workshop which are published as papers in this Proceedings volume. Six technical papers not presented at the Workshop are also published and one presentation is not published. In addition to these 45 technical presentations or papers, the introductory address was given by J. E. Mock from the Department of Energy. The Workshop Banquet speaker was Jim Combs of Geothermal Resources International, Inc. We thank him for his presentation on GEO geothermal developments at The Geysers. The chairmen of the technical sessions made an important contribution to the Workshop. Other than Stanford faculty members they included: M. Gulati, E. Iglesias, A. Moench, S. Prestwich, and K. Pruess. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and students. We would like to thank J.W. Cook, J.R. Hartford, M.C. King, A.E. Osugi, P. Pettit, J. Arroyo, J. Thorne, and T.A. Ramey for their valued help with the meeting arrangements and preparing the Proceedings. We also owe great thanks to our students who arranged and operated the audio-visual equipment. The Eleventh Workshop was supported by the Geothermal Technology Division of the U.S. Department of Energy through Contract DE-AS03-80SF11459. We deeply appreciate this continued support. January 1986 H.J. Ramey, Jr. P. Kruger R.N. Horne W.E. Brigham F.G. Miller J.R. Counsil

Virtual Workshop

DEFF Research Database (Denmark)

Buus, Lillian; Bygholm, Ann

In relation to the Tutor course in the Mediterranean Virtual University (MVU) project, a virtual workshop “Getting experiences with different synchronous communication media, collaboration, and group work” was held with all partner institutions in January 2006. More than 25 key-tutors within MVU...

The workload analysis in welding workshop

Science.gov (United States)

Wahyuni, D.; Budiman, I.; Tryana Sembiring, M.; Sitorus, E.; Nasution, H.

2018-03-01

This research was conducted in welding workshop which produces doors, fences, canopies, etc., according to customer’s order. The symptoms of excessive workload were seen from the fact of employees complaint, requisition for additional employees, the lateness of completion time (there were 11 times of lateness from 28 orders, and 7 customers gave complaints). The top management of the workshop assumes that employees’ workload was still a tolerable limit. Therefore, it was required workload analysis to determine the number of employees required. The Workload was measured by using a physiological method and workload analysis. The result of this research can be utilized by the workshop for a better workload management.

Arcing phenomena in fusion devices workshop

International Nuclear Information System (INIS)

Clausing, R.E.

1979-01-01

The workshop on arcing phenomena in fusion devices was organized (1) to review the pesent status of our understanding of arcing as it relates to confinement devices, (2) to determine what informaion is needed to suppress arcing and (3) to define both laboratory and in-situ experiments which can ultimately lead to reduction of impurities in the plasma caused by arcing. The workshop was attended by experts in the area of vacuum arc electrode phenomena and ion source technology, materials scientists, and both theoreticians and experimentalists engaged in assessing the importance of unipolar arcing in today's tokamaks. Abstracts for papers presented at the workshop are included

PHEV Market Introduction Workshop Summary Report

Energy Technology Data Exchange (ETDEWEB)

Weber, Adrienne M [ORNL; Sikes, Karen R [ORNL

2009-03-01

The Plug-In Hybrid Electric Vehicle (PHEV) Market Introduction Study Workshop was attended by approximately forty representatives from various stakeholder organizations. The event took place at the Hotel Helix in Washington, D.C. on December 1-2, 2008. The purpose of this workshop was to follow-up last year s PHEV Value Proposition Study, which showed that indeed, a viable and even thriving market for these vehicles can exist by the year 2030. This workshop aimed to identify immediate action items that need to be undertaken to achieve a successful market introduction and ensuing large market share of PHEVs in the U.S. automotive fleet.

2017 Bipolar Plate Workshop Summary Report

Energy Technology Data Exchange (ETDEWEB)

Kopasz, John P. [Argonne National Lab. (ANL), Argonne, IL (United States); Benjamin, Thomas G. [Argonne National Lab. (ANL), Argonne, IL (United States); Schenck, Deanna [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-08-17

The Bipolar Plate (BP) Workshop was held at USCAR1 in Southfield, Michigan on February 14, 2017 and included 63 participants from industry, government agencies, universities, and national laboratories with expertise in the relevant fields. The objective of the workshop was to identify research and development (R&D) needs, in particular early-stage R&D, for bipolar plates for polymer electrolyte membrane (PEM) fuel cells for transportation applications. The focus of the workshop was on materials, manufacturing, and design aspects of bipolar plates with the goal of meeting DOE’s 2020 bipolar plate targets. Of special interest was the cost target of ≤$3/kW for the bipolar plate.

Third workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P. (eds.)

1977-12-15

The Third Workshop on Geothermal Reservoir Engineering convened at Stanford University on December 14, 1977, with 104 attendees from six nations. In keeping with the recommendations expressed by the participants at the Second Workshop, the format of the Workshop was retained, with three days of technical sessions devoted to reservoir physics, well and reservoir testing, field development, and mathematical modeling of geothermal reservoirs. The program presented 33 technical papers, summaries of which are included in these Proceedings. Although the format of the Workshop has remained constant, it is clear from a perusal of the Table of Contents that considerable advances have occurred in all phases of geothermal reservoir engineering over the past three years. Greater understanding of reservoir physics and mathematical representations of vapor-dominated and liquid-dominated reservoirs are evident; new techniques for their analysis are being developed, and significant field data from a number of newer reservoirs are analyzed. The objectives of these workshops have been to bring together researchers active in the various physical and mathematical disciplines comprising the field of geothermal reservoir engineering, to give the participants a forum for review of progress and exchange of new ideas in this rapidly developing field, and to summarize the effective state of the art of geothermal reservoir engineering in a form readily useful to the many government and private agencies involved in the development of geothermal energy. To these objectives, the Third Workshop and these Proceedings have been successfully directed. Several important events in this field have occurred since the Second Workshop in December 1976. The first among these was the incorporation of the Energy Research and Development Administration (ERDA) into the newly formed Department of Energy (DOE) which continues as the leading Federal agency in geothermal reservoir engineering research. The Third

Veterinary Immunology Committee Toolkit Workshop 2010: Progress and plans

Science.gov (United States)

The Third Veterinary Immunology Committee (VIC) Toolkit Workshop took place at the Ninth International Veterinary Immunology Symposium (IVIS) in Tokyo, Japan on August 18, 2020. The Workshop built on previous Toolkit Workshops and covered various aspects of reagent development, commercialisation an...

Lunar Reconnaissance Orbiter Lunar Workshops for Educators

Science.gov (United States)

Jones, A. P.; Hsu, B. C.; Hessen, K.; Bleacher, L.

2012-12-01

The Lunar Workshops for Educators (LWEs) are a series of weeklong professional development workshops, accompanied by quarterly follow-up sessions, designed to educate and inspire grade 6-12 science teachers, sponsored by the Lunar Reconnaissance Orbiter (LRO). Participants learn about lunar science and exploration, gain tools to help address common student misconceptions about the Moon, find out about the latest research results from LRO scientists, work with data from LRO and other lunar missions, and learn how to bring these data to their students using hands-on activities aligned with grade 6-12 National Science Education Standards and Benchmarks and through authentic research experiences. LWEs are held around the country, primarily in locations underserved with respect to NASA workshops. Where possible, workshops also include tours of science facilities or field trips intended to help participants better understand mission operations or geologic processes relevant to the Moon. Scientist and engineer involvement is a central tenant of the LWEs. LRO scientists and engineers, as well as scientists working on other lunar missions, present their research or activities to the workshop participants and answer questions about lunar science and exploration. This interaction with the scientists and engineers is consistently ranked by the LWE participants as one of the most interesting and inspiring components of the workshops. Evaluation results from the 2010 and 2011 workshops, as well as preliminary analysis of survey responses from 2012 participants, demonstrated an improved understanding of lunar science concepts among LWE participants in post-workshop assessments (as compared to identical pre-assessments) and a greater understanding of how to access and effectively share LRO data with students. Teachers reported increased confidence in helping students conduct research using lunar data, and learned about programs that would allow their students to make authentic

IJCAI-91 Workshop on Objects and Artificial Intelligence

OpenAIRE

Hatzilygeroudis, Ioannis

1994-01-01

The Objects and Artificial Intelligence Workshop was held on 25 August 1991 in conjunction with the 1991 International Joint Conference on Artificial Intelligence. The workshop brought together researchers in AI and object-oriented programming to exchange ideas and investigate possible avenues of cooperation between AI and object-oriented programming. The workshop dealt with both the theoretical and the practical aspects of this cooperation.

The 2010 AOP Workshop Summary Report

Science.gov (United States)

Hooker, Stanford B.; Morrow, John H.; Brown, James W.; Firestone, Elaine R.

2011-01-01

The rationale behind the current workshop, which was hosted by Biospherical Instruments Inc. (BSI), was to update the community and get community input with respect to the following: topics not addressed during the first workshop, specifically the processing of above-water apparent optical property (AOP data) within the Processing of Radiometric Observations of Seawater using Information Technologies (PROSIT) architecture; PROSIT data processing issues that have developed or tasks that have been completed, since the first workshop; and NASA instrumentation developments, both above- and in-water, that are relevant to both workshops and next generation mission planning. The workshop emphasized presentations on new AOP instrumentation, desired and required features for processing above-water measurements of the AOPs of seawater, working group discussions, and a community update for the in-water data processing already present in PROSIT. The six working groups were organized as follows: a) data ingest and data products; b) required and desired features for optically shallow and optically deep waters; c) contamination rejection (clouds), corrections, and data filtering; d) sun photometry and polarimetry; e) instrumentation networks; and f) hyperspectral versus fixed-wavelength sensors. The instrumentation networks working group was intended to provide more detailed information about desired and required features of autonomous sampling systems. Plenary discussions produced a number of recommendations for evolving and documenting PROSIT.

ADVANCES AND CHALLENGES IN SUGARCANE BIOTECHNOLOY AND PLANT PATHOLOGY: A REVIEW OF THE IX PLANT PATHOLOGY WORKSHOP AND VI MOLECULAR BIOLOGY WORKSHOP

Science.gov (United States)

The IX Pathology Workshop and VI Molecular Biology Workshop of the International Society of Sugar Cane Technologists (ISSCT) were organised jointly and hosted by the Colombian Sugarcane Research Centre (CENICAÑA) from 23-27 June 2008 at the Radisson Royal Hotel in Cali, Colombia. The Workshop was we...

Teacher Workshops in the US: Goals, Best Practices and Impact

Science.gov (United States)

Hörst, S. M.

2011-10-01

The goal of the workshop is to educate the teachers on a few focused topics so that they can transfer the knowledge they gain to their students. We will recruit scientists who are attending the meeting to participate in the workshops and will also pair the teachers with scientists in the field who can serve as a resource for the teacher and their class throughout the school year. The scientists can answer questions the teachers may have, be available to do video lectures or interactive question and answer sessions over skype, and work with the teachers to develop hands-on classroom activities. We will partner closely with EPO professionals in NASA's Science Mission Directorate to ensure that best practices for the workshops are employed, including ensuring that the workshop and workshop materials are designed within the framework of the state standards, surveying participating teachers before the workshops about their needs and goals, assessing the participants pre-workshop knowledge, and engaging participants as learners during the workshop [1]. The impact of the workshop will be increased by providing the teachers and students with a scientist who will serve as a long-term resource. We will maintain contact with the teachers after the workshop to ensure that the scientists are still actively engaged in their classroom and to collect feedback. References [1] Shupla C, et al. (2011) Lessons Learned: Best Practices in Educator Workshops. 42nd Lunar and Planetary Science Conference, no. 2828. EPSC Abstracts Vol. 6, EPSC-DPS2011-1775, 2011 EPSC-DPS Joint Meeting 2011 c Author(s) 2011

Summary of the Workshop

International Nuclear Information System (INIS)

Myers, S; Zimmermann, F

2012-01-01

The summary session of the LHC Performance Workshop in Chamonix, 6-10 February 2012, synthesized one week of presentations and intense discussions on the near-, medium- and long-term strategy for the LHC and LHC upgrades. In particular, Chamonix’12 discussed the lessons from 2011, the strategy, beam energy and beam parameters for 2012, the planning for the Long Shutdown no. 1 (LS1), the measures and schemes for improving or maintaining the machine availability at higher beam energy, the injector performance and injector upgrade schedule, the HL-LHC project as well as possible additional or future LHC upgrades like LHeC and HELHC. Key workshop themes included the risk associated with 4 TeV beam energy in 2012, the beam energy after LS1, the turnaround time, the physics goal and optimized running schedule for 2012, the achievements and plans for Pb-Pb and p-Pb collisions, beam-beam effects, electron-cloud phenomena and UFOs. We report the proposals for decisions which have emerged at the Chamonix’12 workshop. (author)

Summary of the Workshop

Energy Technology Data Exchange (ETDEWEB)

Myers, S; Zimmermann, F [European Organization for Nuclear Research, Geneva (Switzerland)

2012-07-01

The summary session of the LHC Performance Workshop in Chamonix, 6-10 February 2012, synthesized one week of presentations and intense discussions on the near-, medium- and long-term strategy for the LHC and LHC upgrades. In particular, Chamonix’12 discussed the lessons from 2011, the strategy, beam energy and beam parameters for 2012, the planning for the Long Shutdown no. 1 (LS1), the measures and schemes for improving or maintaining the machine availability at higher beam energy, the injector performance and injector upgrade schedule, the HL-LHC project as well as possible additional or future LHC upgrades like LHeC and HELHC. Key workshop themes included the risk associated with 4 TeV beam energy in 2012, the beam energy after LS1, the turnaround time, the physics goal and optimized running schedule for 2012, the achievements and plans for Pb-Pb and p-Pb collisions, beam-beam effects, electron-cloud phenomena and UFOs. We report the proposals for decisions which have emerged at the Chamonix’12 workshop. (author)

Mars exploration study workshop 2

Science.gov (United States)

Duke, Michael B.; Budden, Nancy Ann

1993-11-01

A year-long NASA-wide study effort has led to the development of an innovative strategy for the human exploration of Mars. The latest Mars Exploration Study Workshop 2 advanced a design reference mission (DRM) that significantly reduces the perceived high costs, complex infrastructure, and long schedules associated with previous Mars scenarios. This surface-oriented philosophy emphasizes the development of high-leveraging surface technologies in lieu of concentrating exclusively on space transportation technologies and development strategies. As a result of the DRM's balanced approach to mission and crew risk, element commonality, and technology development, human missions to Mars can be accomplished without the need for complex assembly operations in low-Earth orbit. This report, which summarizes the Mars Exploration Study Workshop held at the Ames Research Center on May 24-25, 1993, provides an overview of the status of the Mars Exploration Study, material presented at the workshop, and discussions of open items being addressed by the study team. The workshop assembled three teams of experts to discuss cost, dual-use technology, and international involvement, and to generate a working group white paper addressing these issues. The three position papers which were generated are included in section three of this publication.

Workshop on automated beam steering and shaping (ABS). Proceedings

Energy Technology Data Exchange (ETDEWEB)

Lindroos, M [ed.

1999-09-10

A workshop on Automated Beam Steering and Shaping (ABS) was held at CERN in December 1998. This was the first workshop dedicated to this subject. The workshop had two major goals: to review the present status of ABS algorithms and systems around the world and to create a worldwide ABS community. These proceedings contain summary reports from all sessions, contributions from several presentations held at the workshop, and a complete set of abstracts for all presentations. (orig.)

Workshop on automated beam steering and shaping (ABS). Proceedings

International Nuclear Information System (INIS)

Lindroos, M.

1999-01-01

A workshop on Automated Beam Steering and Shaping (ABS) was held at CERN in December 1998. This was the first workshop dedicated to this subject. The workshop had two major goals: to review the present status of ABS algorithms and systems around the world and to create a worldwide ABS community. These proceedings contain summary reports from all sessions, contributions from several presentations held at the workshop, and a complete set of abstracts for all presentations. (orig.)

Workshop on selected aspects of radiochemistry

International Nuclear Information System (INIS)

1991-11-01

The aspects chosen for the workshop are: isotope preparation, separation methods; radiochemical methods and analyses; environmental protection and radiochemistry; the chemistry of the fifth halogen, astatine. From the 28 contributions presented at the workshop, 24 are of relevance in the INIS and EDB scope and are separately retrievable from the database. (BBR) [de

An Equal Employment Opportunity Sensitivity Workshop

Science.gov (United States)

Patten, Thomas H., Jr.; Dorey, Lester E.

1972-01-01

The equal employment opportunity sensitivity workshop seems to be a useful training device for getting an organization started on developing black and white change agents. A report on the establishment of such a workshop at the U.S. Army Tank Automotive Command (TACOM). Includes charts of design, characteristics, analysis of results, program…

The Workshop on Animal Botulism in Europe

DEFF Research Database (Denmark)

Skarin, Hanna; Tevell Åberg, Annica; Woudstra, Cédric

2013-01-01

. Animal botulism is underreported and underdiagnosed, but an increasing number of reports, as well as the information gathered from this workshop, show that it is an emerging problem in Europe. The workshop was divided into 4 sessions: animal botulism in Europe, the bacteria behind the disease, detection...... and diagnostics, and European collaboration and surveillance. An electronic survey was conducted before the workshop to identify the 3 most needed discussion points, which were: prevention, preparedness and outbreak response; detection and diagnostics; and European collaboration and surveillance. The main...

Recent Workshops

CERN Multimedia

Wickens, F. J.

Since the previous edition of ATLAS e-news, the NIKHEF Institute in Amsterdam has hosted not just one but two workshops related to ATLAS TDAQ activities. The first in October was dedicated to the Detector Control System (DCS). Just three institutes, CERN, NIKHEF and St Petersburg, provide the effort for the central DCS services, but each ATLAS sub-detector provides effort for their own controls. Some 30 people attended, including representatives for all of the ATLAS sub-detectors, representatives of the institutes working on the central services and the project leader of JCOP, which brings together common aspects of detector controls across the LHC experiments. During the three-day workshop the common components were discussed, and each sub-detector described their experiences and plans for their future systems. Whilst many of the components to be used are standard commercial components, a key custom item for ATLAS is the ELMB (Embedded Local Monitor Board). Prototypes for this have now been extensively test...

The Halden Reactor Project workshop on HAMMLAB 2000

International Nuclear Information System (INIS)

Sebok, Angelia L.; Grini, Rolf-Einar; Larsen, Marit; Ness, Eyvind; Soerensen, Aimar

1998-01-01

A workshop on HAMMLAB 2000 was organised in Halden, May 26-27, 1997. The purpose of the workshop was to discuss and make recommendations on requirements for the design of HAMMLAB 2000 and to discuss the future research agenda. The workshop began with several presentations summarising the status of the current HAMMLAB 2000 project. Three invited speakers with expertise in human-machine laboratories and simulators delivered presentations of their experiences. Later, the workshop was divided into five working groups that discussed the following issues in parallel: (1) Technical Studies, Research Agenda; (2) Human Factors Research Agenda; (3) Data Collection; (4) Synergy with Other Industries; (5) Virtual Reality. Each group produced specific recommendations that were summarised by the group's facilitator in a joint session of the workshop. This report summarises the presentation of the invited speakers, and the discussions and recommendations of the individual working groups. (author)

Competitiveness Improvement Project Informational Workshop

Energy Technology Data Exchange (ETDEWEB)

Sinclair, Karin C [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Preus, Robert W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Dana, Scott [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Van Dam, Jeroen J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Damiani, Rick R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jackson, Kyndall R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Baring-Gould, Edward I [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jain, Anant [Intertek

2018-02-27

This presentation was given at the Competitiveness Improvement Project (CIP) Informational Workshop on December 6, 2017. Topics covered during the workshop include an overview of the CIP, past projects, scoring criteria, technical support opportunities, certification body requirements, standards applicable to distributed wind generators, information on the National Electric Code, certification testing requirements, test site requirements, National Environmental Policy Act, design review, levelized cost of energy, procurement/contracting, project management/deliverables, and outreach materials.

Skin Microbiota Workshop: Multidisciplinary Perspectives, Challenges and Opportunities

Science.gov (United States)

2014-12-08

SECURITY CLASSIFICATION OF: This report details the outcome of the 1st Skin Microbiota Workshop, Boulder, CO, held on October 15th-16th 2012. The...Sep-2014 Approved for Public Release; Distribution Unlimited Final Report: Skin Microbiota Workshop: Multidisciplinary Perspectives, Challenges and...Number of Papers published in peer-reviewed journals: Number of Papers published in non peer-reviewed journals: Final Report: Skin Microbiota Workshop

International magnetic pulse compression workshop: (Proceedings)

Energy Technology Data Exchange (ETDEWEB)

Kirbie, H.C.; Newton, M.A.; Siemens, P.D.

1991-04-01

A few individuals have tried to broaden the understanding of specific and salient pulsed-power topics. One such attempt is this documentation of a workshop on magnetic switching as it applies primarily to pulse compression (power transformation), affording a truly international perspective by its participants under the initiative and leadership of Hugh Kirbie and Mark Newton of the Lawrence Livermore National Laboratory (LLNL) and supported by other interested organizations. During the course of the Workshop at Granlibakken, a great deal of information was amassed and a keen insight into both the problems and opportunities as to the use of this switching approach was developed. The segmented workshop format proved ideal for identifying key aspects affecting optimum performance in a variety of applications. Individual groups of experts addressed network and system modeling, magnetic materials, power conditioning, core cooling and dielectrics, and finally circuits and application. At the end, they came together to consolidate their input and formulate the workshop's conclusions, identifying roadblocks or suggesting research projects, particularly as they apply to magnetic switching's trump card--its high-average-power-handling capability (at least on a burst-mode basis). The workshop was especially productive both in the quality and quantity of information transfer in an environment conducive to a free and open exchange of ideas. We will not delve into the organization proper of this meeting, rather we wish to commend to the interested reader this volume, which provides the definitive and most up-to-date compilation on the subject of magnetic pulse compression from underlying principles to current state of the art as well as the prognosis for the future of magnetic pulse compression as a consensus of the workshop's organizers and participants.

International magnetic pulse compression workshop: [Proceedings

International Nuclear Information System (INIS)

Kirbie, H.C.; Newton, M.A.; Siemens, P.D.

1991-04-01

A few individuals have tried to broaden the understanding of specific and salient pulsed-power topics. One such attempt is this documentation of a workshop on magnetic switching as it applies primarily to pulse compression (power transformation), affording a truly international perspective by its participants under the initiative and leadership of Hugh Kirbie and Mark Newton of the Lawrence Livermore National Laboratory (LLNL) and supported by other interested organizations. During the course of the Workshop at Granlibakken, a great deal of information was amassed and a keen insight into both the problems and opportunities as to the use of this switching approach was developed. The segmented workshop format proved ideal for identifying key aspects affecting optimum performance in a variety of applications. Individual groups of experts addressed network and system modeling, magnetic materials, power conditioning, core cooling and dielectrics, and finally circuits and application. At the end, they came together to consolidate their input and formulate the workshop's conclusions, identifying roadblocks or suggesting research projects, particularly as they apply to magnetic switching's trump card--its high-average-power-handling capability (at least on a burst-mode basis). The workshop was especially productive both in the quality and quantity of information transfer in an environment conducive to a free and open exchange of ideas. We will not delve into the organization proper of this meeting, rather we wish to commend to the interested reader this volume, which provides the definitive and most up-to-date compilation on the subject of magnetic pulse compression from underlying principles to current state of the art as well as the prognosis for the future of magnetic pulse compression as a consensus of the workshop's organizers and participants

NEA International Workshop on the Nuclear Innovation Road-map - NI2050. Workshop proceedings

International Nuclear Information System (INIS)

Ait Abderrahim, Hamid; Fernandez Fernandez, Alberto; Van Walle, Eric; Speranzini, Robert; Zezula, Lubor; Puska, Eija Karita; Tuomisto, Harri; Al Mazouzi, Abderrahim; Bazile, Fanny; Cordier, Pierre-Yves; Wahide, Carole; Tromm, Th. Walter; Horvath, Akos; Agostini, Pietro; Ambrosini, Walter; Kamide, Hideki; Nakatsuka, Toru; Sagayama, Yutaka; Tsujimoto, Kazufumi; Jeong, Ik; LEE, Gye Seok; Roelofs, Ferry; Van Der Lugt, Hermen; Wrochna, Grzegorz; Alekseev, Pavel; Andreeva-Andrievskaya, Lyudmila N.; Liska, Peter; Cizelj, Leon; Castelao Lopez, Carlos; Zimmermann, Martin; Rayment, Fiona; Pasamehmetoglu, Kemal; Martin Ramos, Manuel; Schmitz, Bruno; Monti, Stefano; Bignan, Gilles; Mcgrath, Margaret; Caron-Charles, Marylise; Magwood, William IV; Ha, Jaejoo; Deffrennes, Marc; Paillere, Henri; Noh, Jae Man; Gulliford, Jim; Breest, Axel; Matsumoto, Kiyoshi; Lebedev, Vladimir

2015-07-01

The two-day workshop held at the OECD Headquarters in Paris on 7-8 July 2015, brought together some of the leading experts in the field of nuclear fission research, development and demonstration. The purpose was to launch the NEA Nuclear Innovation 2050 Initiative, aiming, after a first survey phase, at producing a road-map of main priority research programs and infrastructures necessary to support the role nuclear energy may play in the low carbon power sector of the future. This might then further lead to some ad-hoc co-operation frameworks that help to effectively implement key priorities coming out of the road-mapping. The workshop was organised into the following five sessions: 1 - Opening session on NI2050: vision and main objectives; 2 - National presentations on nuclear fission research and innovation activities (programs, infrastructures, budgets); 3 - Presentations on some existing international nuclear fission road-maps and co-operation frameworks; 4 - Defining the way forward for NI2050: survey, road-mapping and priorities and co-operation; 5 - Open discussion. This document gathers the available presentations given at this workshop

Twelfth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Rivera, J. (Stanford Geothermal Program)

1987-01-22

Preface The Twelfth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 20-22, 1987. The year ending December 1986 was very difficult for the domestic geothermal industry. Low oil prices caused a sharp drop in geothermal steam prices. We expected to see some effect upon attendance at the Twelfth Workshop. To our surprise, the attendance was up by thirteen from previous years, with one hundred and fifty-seven registered participants. Eight foreign countries were represented: England, France, Iceland, Italy, Japan, Mexico, New Zealand, and Turkey. Despite a worldwide surplus of oil, international geothermal interest and development is growing at a remarkable pace. There were forty-one technical presentations at the Workshop. All of these are published as papers in this Proceedings volume. Seven technical papers not presented at the Workshop are also published; they concern geothermal developments and research in Iceland, Italy, and New Zealand. In addition to these forty-eight technical presentations or papers, the introductory address was given by Henry J. Ramey, Jr. from the Stanford Geothermal Program. The Workshop Banquet speaker was John R. Berg from the Department of Energy. We thank him for sharing with the Workshop participants his thoughts on the expectations of this agency in the role of alternative energy resources, specifically geothermal, within the country???s energy framework. His talk is represented as a paper in the back of this volume. The chairmen of the technical sessions made an important contribution to the workshop. Other than Stanford faculty members they included: M. Gulati, K. Goyal, G.S. Bodvarsson, A.S. Batchelor, H. Dykstra, M.J. Reed, A. Truesdell, J.S. Gudmundsson, and J.R. Counsil. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and students. We would like to thank Jean Cook, Marilyn King, Amy Osugi, Terri Ramey, and Rosalee Benelli for their valued help with the meeting

Workshop on Women of Applied Mathematics: Research and Leadership

Energy Technology Data Exchange (ETDEWEB)

Dianne P. O' Leary; Tamara G. Kolda

2004-09-28

We held a two and a half day workshop on Women of Applied Mathematics: Research and Leadership at the University of Maryland in College Park, Maryland, October 8--10, 2003. The workshop provided a technical and professional forum for eleven senior women and twenty-four early-career women in applied mathematics. Each participant committed to an outreach activity and publication of a report on the workshop's web site. The final session of the workshop produced recommendations for future action.

Magnetic Suspension Technology Workshop

International Nuclear Information System (INIS)

Keckler, C.R.; Groom, N.J.; Britcher, C.P.

1993-01-01

In order to identify the state of magnetic suspension technology in such areas as rotating systems, pointing of experiments or subsystems, payload isolation, and superconducting materials, a workshop on Magnetic Suspension Technology was held at the Langley Research Center in Hampton, Virginia, on 2-4 Feb. 1988. The workshop included five technical sessions in which a total of 24 papers were presented. The technical sessions covered the areas of pointing, isolation, and measurement, rotating systems, modeling and control, and superconductors. A list of attendees is provided. Separate abstracts have been prepared for articles from this report

Report from the SciDB Workshop

Directory of Open Access Journals (Sweden)

J Becla

2008-11-01

Full Text Available A mini-workshop with representatives from the data-driven science and database research communities was organized in response to suggestions at the first XLDB Workshop. The goal was to develop common requirements and primitives for a next-generation database management system that scientists would use, including those from high-energy physics, astronomy, biology, geoscience and fusion, in order to stimulate research and advance technology. These requirements were thought by the database researchers to be novel and unlikely to be fully met by current commercial vendors. The two groups accordingly decided to explore building a new open source DBMS. This paper is the final report of the discussions and activities at the workshop

Proceedings: Instrumentation and control test reduction workshop

International Nuclear Information System (INIS)

1991-09-01

Instrumentation and control (I ampersand C) surveillance and testing is a significant contributor to operations and management costs. Several techniques to eliminate or reduce manual testing requirements could reduce costs while improving plant safety and performance. I ampersand C test reduction was the subject of this 1991 workshop. The workshop covered test elimination, test reduction, test automation, and relevant standards and benefits. The conclusions of the workshop were the following: More utility information sharing is important. There is a significant amount of information available throughout the industry, but it is not available in a concise, useable form. An I ampersand C utility users group is needed to address items such as instrument calibration reduction, set-point methodologies, and other current I ampersand C issues. The workshop was well received. The timing is right to initiate actions to reduce testing

Advancing geodesy in the U.S. Midcontinent: workshop report

Science.gov (United States)

Hamburger, Michael W.; Boyd, Oliver S.; Calais, Eric; King, Nancy E.; Stein, Seth A.

2014-01-01

The workshop on “Advancing Geodesy in the U.S. Midcontinent” was held from October 31 to November 1, 2012, at Northwestern University in Evanston, Illinois. The workshop included 28 participants from academia, government, and private-sector organizations that are involved in research on geodesy and earthquake hazards in the seismically active areas of the U.S. midcontinent (the region of relatively undeformed crust roughly between the Great Plains and Appalachian Mountains). The workshop was intended to provide guidance to the U.S. Geological Survey’s internal and external Earthquake Hazards research programs in the U.S. midcontinent. The 2012 workshop was developed as a follow-up to the “Workshop on New Madrid Geodesy and Understanding Intraplate Earthquakes,” held in Norwood, Massachusetts, in March 2011. The goal of the 2012 workshop was to provide specific recommendations to the U.S. Geological Survey on priorities for infrastructure and research investments related to geodesy in the U.S. midcontinent.

Proceedings of the workshop on applied mathematics

Energy Technology Data Exchange (ETDEWEB)

Lee, H C; Couture, M; Douglas, S; Leivo, H P

1992-10-01

The Workshop on Applied Mathematics was held at the Cockcroft Centre, Deep River, Ontario, 1992 February 7-8. The purpose of the workshop was to provide a forum for applied mathematicians to survey the use and to discuss the future of applied mathematics at AECL Research. There were 57 participants at the workshop A total of eight 30-minute and 25 15-minute talks were presented describing mathematical techniques used in the whole range of activities at AECL Research, from numerical simulation of fluid flow through eddy current testing to quantum algebra and accelerator physics.

Proceedings of the workshop on applied mathematics

International Nuclear Information System (INIS)

Lee, H.C.; Couture, M.; Douglas, S.; Leivo, H.P.

1992-10-01

The Workshop on Applied Mathematics was held at the Cockcroft Centre, Deep River, Ontario, 1992 February 7-8. The purpose of the workshop was to provide a forum for applied mathematicians to survey the use and to discuss the future of applied mathematics at AECL Research. There were 57 participants at the workshop A total of eight 30-minute and 25 15-minute talks were presented describing mathematical techniques used in the whole range of activities at AECL Research, from numerical simulation of fluid flow through eddy current testing to quantum algebra and accelerator physics

Fourteenth workshop geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Miller, F.G.; Brigham, W.E.; Cook, J.W.

1989-01-01

The Fourteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 24--26, 1989. Major areas of discussion include: (1) well testing; (2) various field results; (3) geoscience; (4) geochemistry; (5) reinjection; (6) hot dry rock; and (7) numerical modelling. For these workshop proceedings, individual papers are processed separately for the Energy Data Base.

Fourteenth workshop geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Miller, F.G.; Brigham, W.E.; Cook, J.W.

1989-12-31

The Fourteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 24--26, 1989. Major areas of discussion include: (1) well testing; (2) various field results; (3) geoscience; (4) geochemistry; (5) reinjection; (6) hot dry rock; and (7) numerical modelling. For these workshop proceedings, individual papers are processed separately for the Energy Data Base.

2003 RIA R AND D WORKSHOP.

Energy Technology Data Exchange (ETDEWEB)

OZAKI, S.ET AL.

2003-08-26

The 2003 RIA R&D Workshop was held on August 26-28, 2003 at the Four Points Sheraton Hotel in Bethesda, Maryland. This Workshop was chaired by Satoshi Ozaki of BNL and sponsored by the Nuclear Physics Division of DOE, with the help of Oak Ridge Institute for Science and Education (ORISE). The purpose of this workshop was to understand the present status of R&D efforts for RIA, to evaluate the needs for further R&D, and to identify opportunities for international collaborations. The workshop examined and documented the current pre-conceptual design for RIA, identifying areas where decisions on technical options remain. The status of the current RIA R&D program was documented, recognizing areas where efforts were needed in light of what had been learned. The ongoing and planned R&D activities for operating and planned rare-isotope facilities were presented, enabling the workshop to be a venue to develop coordinated R&D efforts of mutual benefit to U.S. and international efforts. The scientific program for the first day (August 26, 2003) consisted mostly of invited talks presented by major research groups involved in RIA and other RI beam facilities. The talks included those covering: Science of RIA and the RIA Facility Performance Requirements; The Reference RIA Facility Pre-CDR design that was used for the NSAC cost exercise (M. Harrison Sub-Panel) in January 2001; New or latest perspectives on the RIA design at ANL & MSU; and RI Beam facility plans and overview of the R&D activities at overseas laboratories. The second day (August 27, 2003) was devoted to contributed talks on continuing R&D, including that which had been supported by DOE RIA R&D funds. The third day (August 28, 2003) began with open panel discussions in the morning, including further input from participants. The panel members discussed the present status of the RIA planning and R&D needs in a closed session for the rest of the day, and then worked on report planning and writing. This Workshop

76 FR 20690 - International Consortium of Orthopedic Registries; Public Workshop

Science.gov (United States)

2011-04-13

... is the target audience for this public workshop? Who should attend this public workshop? This workshop is open to all interested parties. The target audience is comprised of data holders, researchers...

10th International Workshop on Condensed Matter Theories

CERN Document Server

Kalia, Rajiv; Bishop, R

1987-01-01

The second volume of Condensed Matter Theories contains the proceedings of the 10th International Workshop held at Argonne National Laboratory, Argonne, IL, U.S.A. during the week of July 21, 1986. The workshop was attended by high-energy, nuclear and condensed-matter physicists as well as materials scientists. This diverse blend of participants was in keeping with the flavor of the previous workshops. This annual series of international workshops was"started in 1977 in Sao Paulo, Brazil. Subsequent'workshops were held in Trieste (Italy), Buenos Aires (Argentina), Caracas (Venezuela), Altenberg (West Germany), Granada (Spain), and San Francisco (U.S.A.). What began as a meeting of the physicists from the Western Hemisphere has expanded in the last three years into an international conference of scientists with diverse interests and backgrounds. This diversity has promoted a healthy exchange of ideas from different branches of physics and also fruitful interactions among the participants. The present volume is...

Symmetries In Graphs, Maps, And Polytopes Workshop 2014

CERN Document Server

Jajcay, Robert

2016-01-01

This volume contains seventeen of the best papers delivered at the SIGMAP Workshop 2014, representing the most recent advances in the field of symmetries of discrete objects and structures, with a particular emphasis on connections between maps, Riemann surfaces and dessins d’enfant. Providing the global community of researchers in the field with the opportunity to gather, converse and present their newest findings and advances, the Symmetries In Graphs, Maps, and Polytopes Workshop 2014 was the fifth in a series of workshops. The initial workshop, organized by Steve Wilson in Flagstaff, Arizona, in 1998, was followed in 2002 and 2006 by two meetings held in Aveiro, Portugal, organized by Antonio Breda d’Azevedo, and a fourth workshop held in Oaxaca, Mexico, organized by Isabel Hubard in 2010. This book should appeal to both specialists and those seeking a broad overview of what is happening in the area of symmetries of discrete objects and structures.

Workshop Report on Space Weather Risks and Society

Science.gov (United States)

Langhoff, Stephanie R.; Straume, Tore

2012-01-01

As technological innovations produce new capabilities, complexities, and interdependencies, our susceptibility to the societal impacts of space weather increase. There is real concern in the scientific community that our infrastructure would be at significant risk if a major geomagnetic storm should occur. To discuss the societal impacts of space weather, we brought together an interdisciplinary group of subject matter experts and societal stakeholders to participate in a workshop entitled Space Weather Risks and Society. The workshop was held at Ames Research Center (ARC) on 15-16 October 2011. The workshop was co-sponsored by NASA Ames Research Center (ARC), the Lockheed Martin Advanced Technology Center (LMATC), the Space Weather Prediction Center (SWPC, part of the National Oceanic and Atmospheric Administration NOAA), and the Rutherford Appleton Laboratory (RAL, part of the UK Science and Technology Facilities Council STFC). The workshop is part of a series of informal weekend workshops hosted by Center Director Pete Worden.

XXXIV Bialowieza Workshop on Geometric Methods in Physics

CERN Document Server

Ali, S; Bieliavsky, Pierre; Odzijewicz, Anatol; Schlichenmaier, Martin; Voronov, Theodore

2016-01-01

This book features a selection of articles based on the XXXIV Białowieża Workshop on Geometric Methods in Physics, 2015. The articles presented are mathematically rigorous, include important physical implications and address the application of geometry in classical and quantum physics. Special attention deserves the session devoted to discussions of Gerard Emch's most important and lasting achievements in mathematical physics. The Białowieża workshops are among the most important meetings in the field and gather participants from mathematics and physics alike. Despite their long tradition, the Workshops remain at the cutting edge of ongoing research. For the past several years, the Białowieża Workshop has been followed by a School on Geometry and Physics, where advanced lectures for graduate students and young researchers are presented. The unique atmosphere of the Workshop and School is enhanced by the venue, framed by the natural beauty of the Białowieża forest in eastern Poland.

WORKSHOPS: Radiofrequency superconductivity

International Nuclear Information System (INIS)

Anon.

1992-01-01

In the continual push towards higher energy particle beams, superconducting radiofrequency techniques now play a vital role, highlighted in the fifth workshop on radiofrequency superconductivity, held at DESY from 19 - 24 August 1991

WORKSHOPS: Radiofrequency superconductivity

Energy Technology Data Exchange (ETDEWEB)

Anon.

1992-01-15

In the continual push towards higher energy particle beams, superconducting radiofrequency techniques now play a vital role, highlighted in the fifth workshop on radiofrequency superconductivity, held at DESY from 19 - 24 August 1991.

Women in Astronomy Workshop Report

OpenAIRE

Brough, Sarah; Bauer, Amanda E.; Brooks, Kate; Hopkins, Andrew; Maddison, Sarah

2011-01-01

Here we report on the Women in Astronomy Workshop (http://asawomeninastronomy.org/meetings/wia2011/), which was held on 13 May 2011 in Sydney, Australia. The workshop was organised by the Astronomical Society of Australia's Chapter on Women in Astronomy, to discuss some of the issues that face women in astronomy and make recommendations to help support the success of women in Australian astronomy but came to broader conclusions that have value for the whole astronomical community. The worksho...

Baltic Nuclear workshop. Final report

International Nuclear Information System (INIS)

Wahlberg, L.G.

2001-05-01

Proceedings of the NKS/BOK-1.6 workshop on crisis communication 'Baltic Nuclear', held in Stockholm March 19 -20, 2001, with participants from the nuclear power plants and nuclear authorities in the Baltic Sea region. The main content of the workshop was founded on the principle of 'learning by doing'. The participants were therefore practically trained in how to handle a crisis from an information and communication point of view. Added to that there were three different lectures. (au)

The AAAI-13 Conference Workshops

OpenAIRE

Agrawal, Vikas; Archibald, Christopher; Bhatt, Mehul; Bui, Hung; Cook, Diane J.; Cortés, Juan; Geib, Christopher; Gogate, Vibhav; Guesgen, Hans W.; Jannach, Dietmar; Johanson, Michael; Kersting, Kristian; Konidaris, George; Kotthoff, Lars; Michalowski, Martin

2013-01-01

The AAAI-13 Workshop Program, a part of the 27th AAAI Conference on Artificial Intelligence, was held Sunday and Monday, July 14–15, 2013 at the Hyatt Regency Bellevue Hotel in Bellevue, Washington, USA. The program included 12 workshops covering a wide range of topics in artificial intelligence, including Activity Context-Aware System Architectures (WS-13-05); Artificial Intelligence and Robotics Methods in Computational Biology (WS-13-06); Combining Constraint Solving with Mining and Lear...

Proceedings of the Real-Time Systems Engineering Workshop

Science.gov (United States)

2001-08-01

real - time systems engineering. The workshop was held as part of the SEI Symposium in...Washington, DC, during September 2000. The objective of the workshop was to identify key issues and obtain feedback from attendees concerning real - time systems engineering...and interoperability. This report summarizes the workshop in terms of foundation, management, and technical topics, and it contains a discussion related to developing a community of interest for real - time systems

Workshop on wave-ice interaction

Science.gov (United States)

Wadhams, Peter; Squire, Vernon; Rottier, Philip; Liu, Antony; Dugan, John; Czipott, Peter; Shen, Hayley

The subject of wave-ice interaction has been advanced in recent years by small groups of researchers working on a similar range of topics in widely separated geographic locations. Their recent studies inspired a workshop on wave-ice interaction held at the Scott Polar Research Institute, University of Cambridge, England, December 16-18, 1991, where theories in all aspects of the physics of wave-ice interaction were compared.Conveners of the workshop hoped that plans for future observational and theoretical work dealing with outstanding issues in a collaborative way would emerge. The workshop, organized by the Commission on Sea Ice of the International Association for Physical Sciences of the Ocean (IAPSO), was co-chaired by Vernon Squire, professor of mathematics and statistics at the University of Otago, New Zealand, and Peter Wadhams, director of the Scott Polar Research Institute. Participants attended from Britain, Finland, New Zealand, Norway, and the United States.

Economic analysis and prospective simulation in the low carbon town planing. Application of TRANUS+ model to Grenoble city

International Nuclear Information System (INIS)

Saujot, Mathieu

2013-01-01

Strategic spatial planning in France is currently given a rising importance for environmental and climate issues. Is this tool really able to reduce urban sprawl and produce an efficient framework for reducing transport emissions? What are the potential contributions of economic analysis and prospective modelling to planning? To answer these questions, we developed a study on the contributions of economic tools to planning into the broader context of political and administrative reforms in France. We then produced a critical analysis of current planning practices and attempted to define the conditions for a better integration of economic analysis into planning processes and methods. For our case study on the Grenoble urban area, we built and applied a series of economic tools able to inform decision-making on local climate policies in the framework of urban planning. In addition to being the first implementation of the integrated transport - land-use model TRANUS in France, this study further links the TRANUS model to an original economic methodology to obtain a tool we call TRANUS+. This tool is able to take into account the systemic nature of cities and then help to define better transport policies, notably by producing marginal abatement cost curves useful at the urban level. To have a more complete view of urban planning and the way in which it can be improved, we investigated several issues from a planning perspective: the choice of modelling tool and the role of cost-benefit analysis, energy poverty in the transport sector and electric vehicle deployment. (author) [fr

International development workshops. Final technical report

International Nuclear Information System (INIS)

1997-01-01

The US Department of Energy (DOE) and the Nuclear Energy Agency of the Organization for Economic Cooperation and Development/Nuclear Energy Agency (OECD/NEA) began to act on their recognition of the importance of education in nuclear literacy, specifically in radioactive waste management (RWM), several years ago. To address this Goal for nuclear literacy, the US DOE; through the Information and Education Division of the Office of Civilian Radioactive Waste Management (OCRWM) and in cooperation with the OECD/NEA, organized an ''International Workshop on Education in the Field of Radioactive Waste Management'' in Engelberg, Switzerland in June of 1991. To this end, a grant to support nuclear literacy and RWM was written and funded by the OCRWM and the education division of the DOE Yucca Mountain Office in 1990. The over-riding Goal of that workshop and the DOE grant was to find ways of raising the level of nuclear literacy in the general public through educational programs in radioactive waste management (RWM). The two Main Objectives of the workshop were: first, to contribute to an information base for education systems, on global aspects of radioactive waste management; and second, to achieve international consensus on the basic tools and methods required to develop the information base. These two objectives also became the principal objectives of the DOE International Workshops grant. In other words, the global and local (Nevada) objectives were one and the same. Workshop overviews and accomplishments are summarized in this report

International development workshops. Final technical report

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-08-06

The US Department of Energy (DOE) and the Nuclear Energy Agency of the Organization for Economic Cooperation and Development/Nuclear Energy Agency (OECD/NEA) began to act on their recognition of the importance of education in nuclear literacy, specifically in radioactive waste management (RWM), several years ago. To address this Goal for nuclear literacy, the US DOE; through the Information and Education Division of the Office of Civilian Radioactive Waste Management (OCRWM) and in cooperation with the OECD/NEA, organized an ``International Workshop on Education in the Field of Radioactive Waste Management`` in Engelberg, Switzerland in June of 1991. To this end, a grant to support nuclear literacy and RWM was written and funded by the OCRWM and the education division of the DOE Yucca Mountain Office in 1990. The over-riding Goal of that workshop and the DOE grant was to find ways of raising the level of nuclear literacy in the general public through educational programs in radioactive waste management (RWM). The two Main Objectives of the workshop were: first, to contribute to an information base for education systems, on global aspects of radioactive waste management; and second, to achieve international consensus on the basic tools and methods required to develop the information base. These two objectives also became the principal objectives of the DOE International Workshops grant. In other words, the global and local (Nevada) objectives were one and the same. Workshop overviews and accomplishments are summarized in this report.

Google Earth for Landowners: Insights from Hands-on Workshops

Science.gov (United States)

Huff, Tristan

2014-01-01

Google Earth is an accessible, user-friendly GIS that can help landowners in their management planning. I offered hands-on Google Earth workshops to landowners to teach skills, including mapmaking, length and area measurement, and database management. Workshop participants were surveyed at least 6 months following workshop completion, and learning…

State-Level Workshops on Ethanol for Transportation: Final Report

Energy Technology Data Exchange (ETDEWEB)

Graf, A.

2004-01-01

Final report on subcontract for holding four state-level workshops (Hawaii, Kentucky, Nevada, California) to facilitate development of ethanol production facilities in those states. In 2002/2003, under contract to the National Renewable Energy Laboratory, BBI International conducted state-level workshops ethanol in Hawaii, Nevada, Kentucky and California. These four workshops followed over 30 other workshops previous held under the Ethanol Workshop Series program sponsored by the U.S. Department of Energy. Two other workshops were conducted by BBI International during 2003, Oklahoma and Kansas, under contract to the Western Regional Biomass Energy Program. The Ethanol Workshop Series (EWS) was intended to provide a forum for interest groups to gather and discuss what needs to be accomplished to facilitate ethanol production in-state using local biomass resources. In addition, the EWS was to provide a promotional and educational forum for policy makers, community leaders, media and potential stakeholders. It was recognized that to eventually achieve biomass-ethanol production, it was necessary to support grain-ethanol production as a bridge. The long-term goal of the Workshops was to facilitate the development of biomass ethanol plants at a state-level. The near-term goal was to provide correct and positive information for education, promotion, production and use of fuel ethanol. The EWS drew from 65 to over 200 attendees and were deemed by the local organizers to have served the objectives set out by the U.S. Department of Energy.

Pressurized water reactor simulator. Workshop material. 2. ed

International Nuclear Information System (INIS)

2005-01-01

The International Atomic Energy Agency (IAEA) has established an activity in nuclear reactor simulation computer programs to assist its Member States in education. The objective is to provide, for a variety of advanced reactor types, insight and practice in their operational characteristics and their response to perturbations and accident situations. To achieve this, the IAEA arranges for the development and distribution of simulation programs and educational material and sponsors courses and workshops. The workshops are in two parts: techniques and tools for reactor simulator development. And the use of reactor simulators in education. Workshop material for the first part is covered in the IAEA Training Course Series No. 12, 'Reactor Simulator Development' (2001). Course material for workshops using a WWER- 1000 reactor department simulator from the Moscow Engineering and Physics Institute, the Russian Federation is presented in the IAEA Training Course Series No. 21, 2nd edition, 'WWER-1000 Reactor Simulator' (2005). Course material for workshops using a boiling water reactor simulator developed for the IAEA by Cassiopeia Technologies Incorporated of Canada (CTI) is presented in the IAEA publication: Training Course Series No.23, 2nd edition, 'Boiling Water Reactor Simulator' (2005). This report consists of course material for workshops using a pressurized water reactor simulator

Optical Network Testbeds Workshop

Energy Technology Data Exchange (ETDEWEB)

Joe Mambretti

2007-06-01

This is the summary report of the third annual Optical Networking Testbed Workshop (ONT3), which brought together leading members of the international advanced research community to address major challenges in creating next generation communication services and technologies. Networking research and development (R&D) communities throughout the world continue to discover new methods and technologies that are enabling breakthroughs in advanced communications. These discoveries are keystones for building the foundation of the future economy, which requires the sophisticated management of extremely large qualities of digital information through high performance communications. This innovation is made possible by basic research and experiments within laboratories and on specialized testbeds. Initial network research and development initiatives are driven by diverse motives, including attempts to solve existing complex problems, the desire to create powerful new technologies that do not exist using traditional methods, and the need to create tools to address specific challenges, including those mandated by large scale science or government agency mission agendas. Many new discoveries related to communications technologies transition to wide-spread deployment through standards organizations and commercialization. These transition paths allow for new communications capabilities that drive many sectors of the digital economy. In the last few years, networking R&D has increasingly focused on advancing multiple new capabilities enabled by next generation optical networking. Both US Federal networking R&D and other national R&D initiatives, such as those organized by the National Institute of Information and Communications Technology (NICT) of Japan are creating optical networking technologies that allow for new, powerful communication services. Among the most promising services are those based on new types of multi-service or hybrid networks, which use new optical networking

Evaluation of workshops on healing through multicultural counseling ...

African Journals Online (AJOL)

Evaluation of workshops on healing through multicultural counseling: Sport psychology implications. ... Healing through multicultural counselling workshops were conducted at universities in South Africa and ... AJOL African Journals Online.

Proceedings of the 1997 workshop on the utilization of research reactors

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-10-01

The 1997 Workshop on the Utilization of Research Reactors, which is the sixth Workshop on the theme of research reactor utilization was held in Bandung, Indonesia from November 6 to 13. This Workshop was executed based on the agreement in the Eighth International conference for Nuclear Cooperation in Asia (ICNCA) held in Tokyo, March 1997. The whole Workshop consists of the preceding Sub-workshop carried out the demonstration experiment of Radioisotope Production, and the Workshop on the theme of three fields (Neutron Scattering, Radioisotope production, Safe Operation and Maintenance of Research Reactor). The total number of participants for the workshop was about 100 people from 8 countries, i.e. China, Indonesia, Korea, Malaysia, Philippine, Thailand, Vietnam and Japan. It consists of the papers for Sub-workshop, Neutron Scattering, Radioisotope Production, Safe Operation and Maintenance of research reactor, and summary reports. The 53 of the presented papers are indexed individually. (J.P.N.)

Lighting Assessment in Knitting Workshop in Yazd

Directory of Open Access Journals (Sweden)

A Barkhordari

2016-01-01

Full Text Available Introduction: The sense of sight is one of the most vital human senses and help the environment gets most of its information. Whatever one's job is more subtle, more work will be given brightness. Good lighting, increase work efficiency and general physiological effects on people's moods. The relationship between low and high frequency illumination accidents there Methods: This study was conducted in 10 workshops in Yazd home knitting. Due to maximize natural lighting measurements in June and November this year took place in cloudy days. Thus, in both seasons overall lighting, natural and artificial, were evaluated. That, in order to measure all the natural light, artificial light sources (lamps and the measurements were off by clarifying re-lamp, the overall lighting (natural and artificial were measured. In order to measure the general lighting provided by the Illuminating Engineering society and stop the pattern surfaces were used. The workshops with less than standard lighting conditions were identified and interventions to improve the brightness of the workshops were measured again. Results: Average, minimum and maximum overall brightness of spring workshops 4 and 6 respectively, with values of 67/278 and 53/452 is a luxury. Workshops values 5 and 2 47/184 and 43/218 minimum and maximum luxury in order to be daylight in spring. Conclusions: The majority of the studied weaving Workshops lighting was good, with measures such as proper installation and periodic cleaning and dust lamps, replacement lamps burned by use of fluorescent ambient lighting conditions can be improved.

Mixed waste focus area alternative technologies workshop

International Nuclear Information System (INIS)

Borduin, L.C.; Palmer, B.A.; Pendergrass, J.A.

1995-01-01

This report documents the Mixed Waste Focus Area (MWFA)-sponsored Alternative Technology Workshop held in Salt Lake City, Utah, from January 24--27, 1995. The primary workshop goal was identifying potential applications for emerging technologies within the Options Analysis Team (OAT) ''wise'' configuration. Consistent with the scope of the OAT analysis, the review was limited to the Mixed Low-Level Waste (MLLW) fraction of DOE's mixed waste inventory. The Los Alamos team prepared workshop materials (databases and compilations) to be used as bases for participant review and recommendations. These materials derived from the Mixed Waste Inventory Report (MWIR) data base (May 1994), the Draft Site Treatment Plan (DSTP) data base, and the OAT treatment facility configuration of December 7, 1994. In reviewing workshop results, the reader should note several caveats regarding data limitations. Link-up of the MWIR and DSTP data bases, while representing the most comprehensive array of mixed waste information available at the time of the workshop, requires additional data to completely characterize all waste streams. A number of changes in waste identification (new and redefined streams) occurred during the interval from compilation of the data base to compilation of the DSTP data base with the end result that precise identification of radiological and contaminant characteristics was not possible for these streams. To a degree, these shortcomings compromise the workshop results; however, the preponderance of waste data was linked adequately, and therefore, these analyses should provide useful insight into potential applications of alternative technologies to DOE MLLW treatment facilities

Proceedings of the 1998 workshop on the utilization of research reactors

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-10-01

The 1998 Workshop on the Utilization of Research Reactors, which is the seventh Workshop on the theme of research reactor utilization was held in Yogyakarta and Serpong, Indonesia from February 8 to 14. This Workshop was executed based on the agreement in the Ninth International Conference for Nuclear Cooperation in Asia (ICNCA) held in Tokyo, March 1998. The whole Workshop consists of the Workshop on the theme of following three fields, 1) Neutron Scattering, 2) Neutron Activation analysis and 3) Safe Operation and Maintenance of Research Reactor, and the Sub-workshop carried out the experiment of Neutron Activation analysis. The total number of participants for the workshop was about 100 people from 8 countries, i.e. Australia, China, Indonesia, Korea, Malaysia, Thailand, Vietnam and Japan. The 38 papers are indexed individually. (J.P.N.)

Low dose effects and non-monotonic dose responses for endocrine active chemicals: Science to practice workshop: Workshop summary

DEFF Research Database (Denmark)

Beausoleil, Claire; Ormsby, Jean-Nicolas; Gies, Andreas

2013-01-01

A workshop was held in Berlin September 12–14th 2012 to assess the state of the science of the data supporting low dose effects and non-monotonic dose responses (“low dose hypothesis”) for chemicals with endocrine activity (endocrine disrupting chemicals or EDCs). This workshop consisted of lectu...

Report on the Aseismic Slip, Tremor, and Earthquakes Workshop

Science.gov (United States)

Gomberg, Joan; Roeloffs, Evelyn; Trehu, Anne; Dragert, Herb; Meertens, Charles

2008-01-01

This report summarizes the discussions and information presented during the workshop on Aseismic Slip, Tremor, and Earthquakes. Workshop goals included improving coordination among those involved in conducting research related to these phenomena, assessing the implications for earthquake hazard assessment, and identifying ways to capitalize on the education and outreach opportunities presented by these phenomena. Research activities of focus included making, disseminating, and analyzing relevant measurements; the relationships among tremor, aseismic or 'slow-slip', and earthquakes; and discovering the underlying causative physical processes. More than 52 participants contributed to the workshop, held February 25-28, 2008 in Sidney, British Columbia. The workshop was sponsored by the U.S. Geological Survey, the National Science Foundation?s Earthscope Program and UNAVCO Consortium, and the Geological Survey of Canada. This report has five parts. In the first part, we integrate the information exchanged at the workshop as it relates to advancing our understanding of earthquake generation and hazard. In the second part, we summarize the ideas and concerns discussed in workshop working groups on Opportunities for Education and Outreach, Data and Instrumentation, User and Public Needs, and Research Coordination. The third part presents summaries of the oral presentations. The oral presentations are grouped as they were at the workshop in the categories of phenomenology, underlying physical processes, and implications for earthquake hazards. The fourth part contains the meeting program and the fifth part lists the workshop participants. References noted in parentheses refer to the authors of presentations made at the workshop, and published references are noted in square brackets and listed in the Reference section. Appendix A contains abstracts of all participant presentations and posters, which also have been posted online, along with presentations and author contact

Proceedings of the 1998 Photovoltaic Performance and Reliability Workshop

International Nuclear Information System (INIS)

Kroposki, B.

1998-01-01

This proceedings is the compilation of all papers presented at the 11th PV Performance and Reliability Workshop held at the Doubletree Hotel in Cocoa Beach, Florida, on November 3-5, 1998. The workshop was hosted by the Florida Solar Energy Center. This year's workshop included presentations from 29 speakers and had 110 attendees

Second ICFA workshop

International Nuclear Information System (INIS)

Anon.

1979-01-01

A summary is given of the topics discussed at the second ICFA Workshop on 'Possibilities and Limitations of Accelerators and Detectors'. High energy accelerators are discussed, particularly electron-positron and proton-antiproton colliders. (W.D.L.).

Sixth international workshop on linear colliders. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Urakawa, Junji [ed.

1995-08-01

The sixth international workshop on linear colliders (LC95) was held by KEK at Tsukuba Center for Institute. In the workshop 8 parallel working group were organized: WG1 (beam sources and injection linacs), WG2 (damping rings and bunch compressors), WG3 (a: RF sources and structures, b: superconducting cavities, c: two beam accelerators), WG4 (beam dynamics in main linacs), WG5 (final focus and integration regions), WG6 (beam instrumentation), WG7 (overall parameters and construction techniques), WG8 (gamma-gamma collider and miscellaneous). This issue compiles materials which were used in the workshop. (J.P.N.).

What future for nuclear power? Workshop report

International Nuclear Information System (INIS)

1998-01-01

A Workshop on this highly controversial subject, organized by the Energy and Environment Programme of the RIIA, was held on 10th November 1997 at Green College, Oxford. The meeting was attended by some forty people from eight countries, coming from the nuclear and electricity generating industry, governments, research organizations, academic institutions, environmental pressure groups and inter-governmental organizations. In addition, subsequent to this Workshop, there have been a number of smaller, more informal discussions on various aspects of the subject. This paper summarizes the main conclusions arising from the Workshop and from these later discussions

Sixth international workshop on linear colliders. Proceedings

International Nuclear Information System (INIS)

Urakawa, Junji

1995-08-01

The sixth international workshop on linear colliders (LC95) was held by KEK at Tsukuba Center for Institute. In the workshop 8 parallel working group were organized: WG1 (beam sources and injection linacs), WG2 (damping rings and bunch compressors), WG3 (a: RF sources and structures, b: superconducting cavities, c: two beam accelerators), WG4 (beam dynamics in main linacs), WG5 (final focus and integration regions), WG6 (beam instrumentation), WG7 (overall parameters and construction techniques), WG8 (gamma-gamma collider and miscellaneous). This issue compiles materials which were used in the workshop. (J.P.N.)

Report of the workshop on Aviation Safety/Automation Program

Science.gov (United States)

Morello, Samuel A. (Editor)

1990-01-01

As part of NASA's responsibility to encourage and facilitate active exchange of information and ideas among members of the aviation community, an Aviation Safety/Automation workshop was organized and sponsored by the Flight Management Division of NASA Langley Research Center. The one-day workshop was held on October 10, 1989, at the Sheraton Beach Inn and Conference Center in Virginia Beach, Virginia. Participants were invited from industry, government, and universities to discuss critical questions and issues concerning the rapid introduction and utilization of advanced computer-based technology into the flight deck and air traffic controller workstation environments. The workshop was attended by approximately 30 discipline experts, automation and human factors researchers, and research and development managers. The goal of the workshop was to address major issues identified by the NASA Aviation Safety/Automation Program. Here, the results of the workshop are documented. The ideas, thoughts, and concepts were developed by the workshop participants. The findings, however, have been synthesized into a final report primarily by the NASA researchers.

Workshop on the RHIC performance

Energy Technology Data Exchange (ETDEWEB)

Khiari, F.; Milutinovic, J.; Ratti, A.; Rhoades-Brown, M.J. (eds.)

1988-07-01

The most recent conceptual design manual for the Relativistic Heavy Ion Collider (RHIC) at Brookhaven was published in May 1986 (BNL 51932). The purpose of this workshop was to review the design specifications in this RHIC reference manual, and to discuss in detail possible improvements in machine performance by addressing four main areas. These areas are beam-beam interactions, stochastic cooling, rf and bunch instabilities. The contents of this proceedings are as follows. Following an overview of the workshop, in which the motivation and goals are discussed in detail, transcripts of the first day talks are given. Many of these transcripts are copies of the original transparencies presented at the meeting. The following four sections contain contributed papers, that resulted from discussions at the workshop within each of the four working groups. In addition, there is a group summary for each of the four working groups at the beginning of each section. Finally, a list of participants is given.

Proceedings of the fifth Australia-Japan workshop on plasma diagnostics

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The fifth Australia-Japan Workshop on Plasma Diagnostics was held at Japan Atomic Energy Research Institute (JAERI), Naka, Japan, from December 15 to 17 in 1999. The first workshop was held at JAERI, Naka in 1989, and the workshops have been held almost every two years in Australia and Japan under the Agreement between the Government of Japan and the Government of Australia on cooperation in the field of Science and Technology. In the workshops, latest research works for plasma diagnostics and plasma experiment have been presented and discussed. The research works of both countries have been developed, and the mutual understanding became deeper through the workshops. In the fifth workshop, the statuses of JT-60U (JAERI), LHD (National Institute for Fusion Science) and H-1NF (Australian National University) were introduced, and the latest research works for plasma diagnostics were also presented. The active and deeper discussions were performed. This report contains twenty-eight papers presented at the workshop. The 25 of the presented papers are indexed individually. (J.P.N.)

Fifth national stakeholder workshop summary report

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

On April 9--11, 1997, the Department of Energy`s Office of Worker and Community Transition convened its fifth National Stakeholder Workshop. The workshop addressed a wide range of work force restructuring and community transition issues critical to the future success of the Department. Two important elements of the meeting were: (1) reviewing progress made on the challenges identified during the March 1996f stakeholder`s meeting in Atlanta, Georgia; and (2) identifying areas that needed priority attention during the early months of the second Clinton Administration. The format of the Workshop included several plenary sessions and a number of small group discussion sessions. The small group sessions focused on topics related to labor issues, work force restructuring, work force planning, community transition, and employee concerns. The sessions provided a wide range of views on worker and community transition issues. The workshop included presentations on the following topics: Welcome and introductions; Opening remarks; Community reuse organizations: recent accomplishments; Privatization: policy, practice and potential pitfalls; Department of Energy`s integrated training initiatives; Congressional perspective on work force restructuring; and, Privatization and the Ten Year Plan.

From parity violation to hadronic structure and more

CERN Document Server

Jager, K; Kox, S; Lhuillier, D; Maas, F; Page, S; Papanicolas, C; Stiliaris, S; Wiele, J; 3rd International Workshop on From Parity Violation to Hadronic Structure and More (PAVI06); PAVI 06; PAVI 2006

2007-01-01

This book contains the proceedings of the third international workshop on “From Parity Violation to Hadronic Structure and more ...” which was held from May 16 to May 20, 2006, at the George Eliopoulos conference center on the Greek island of Milos. It is part of a series that started in Mainz in 2002 and was followed by a second workshop in Grenoble in 2004. While originally initiated by the extraction of the strangeness contribution to the electromagnetic form factors of the nucleon, the workshop series has continuously broadened the focus to the application of Parity Violation using hadronic probes and to Parity Violation experiments in atomic physics. Meanwhile there have been many exciting new proposals for using Parity Violation in other areas like in the search for new physics beyond the standard model or in exploring hadron structure. There are also close connections to the open question on the size of the two photon exchange amplitude. Fifty years after the 1956 proposal of Lee and Yang to test t...

GammaWorkshops Proceedings

DEFF Research Database (Denmark)

Strålberg, Elisabeth; Klemola, Seppo; Nielsen, Sven Poul

to the GammaWorkshops. The topics included efficiency transfer, true coincidence summing corrections, self-attenuation corrections, measurement of natural radionuclides (natural decay series), combined measurement uncertainty calculations, and detection limits. These topics covered both lectures and practical...

Modeling and Simulation for Safeguards and Nonproliferation Workshop

Energy Technology Data Exchange (ETDEWEB)

Gilligan, Kimberly V. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kirk, Bernadette Lugue [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2015-01-01

The Modeling and Simulation for Safeguards and Nonproliferation Workshop was held December 15–18, 2014, at Oak Ridge National Laboratory. This workshop was made possible by the Next Generation Safeguards Initiative Human Capital Development (NGSI HCD) Program. The idea of the workshop was to move beyond the tried-and-true boot camp training of nonproliferation concepts to spend several days on the unique perspective of applying modeling and simulation (M&S) solutions to safeguards challenges.

Multivariate ordination statistics workshop with R slides

OpenAIRE

Strack, Michael

2015-01-01

2-hour workshop given at Macquarie University Department of Biological Sciences, 4 November 2015. Workshop was an introduction to the family of techniques falling under multivariate ordination, using the R language and drawing heavily from the book "Numerical Ecology with R" by Borcard et. al (2012).

Incorporating Bioenergy in Sustainable Landscape Designs Workshop Two: Agricultural Landscapes

Energy Technology Data Exchange (ETDEWEB)

None

2015-08-01

The Bioenergy Technologies Office hosted two workshops on Incorporating Bioenergy in Sustainable Landscape Designs with Oak Ridge and Argonne National Laboratories in 2014. The second workshop focused on agricultural landscapes and took place in Argonne, IL from June 24—26, 2014. The workshop brought together experts to discuss how landscape design can contribute to the deployment and assessment of sustainable bioenergy. This report summarizes the discussions that occurred at this particular workshop.

10th Workshop on Self-Organizing Maps

CERN Document Server

Schleif, Frank-Michael; Kaden, Marika; Lange, Mandy

2014-01-01

The book collects the scientific contributions presented at the 10th Workshop on Self-Organizing Maps (WSOM 2014) held at the University of Applied Sciences Mittweida, Mittweida (Germany, Saxony), on July 2–4, 2014. Starting with the first WSOM-workshop 1997 in Helsinki this workshop focuses on newest results in the field of supervised and unsupervised vector quantization like self-organizing maps for data mining and data classification.   This 10th WSOM brought together more than 50 researchers, experts and practitioners in the beautiful small town Mittweida in Saxony (Germany) nearby the mountains Erzgebirge to discuss new developments in the field of unsupervised self-organizing vector quantization systems and learning vector quantization approaches for classification. The book contains the accepted papers of the workshop after a careful review process as well as summaries of the invited talks.   Among these book chapters there are excellent examples of the use of self-organizing maps in agriculture, ...

Proceedings of the 1999 workshop on the utilization of research reactors

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-10-01

The 1999 workshop on the utilization of reactors, which is the eighth workshop on the theme of research reactor utilization was held at JAERI Tokai and Mito Plaza Hotel, in Japan from November 25 to December 2. This workshop was executed based on the agreement in the Tenth International conference for Nuclear Cooperation in Asia (ICNCA) held in Tokyo, March 1999. The whole workshop consists of the workshop on the theme of following three fields, 1) neutron scattering, 2) radioisotope production and 3) safe operation and maintenance of research reactor, and the sub-workshop carried out the experiments of small angle neutron scattering. The total number of participants for the workshop was about 70 people from 9 countries, i.e. Australia, China, Indonesia, Korea, Malaysia, The Philippines, Thailand, Vietnam and Japan. The 37 of the presented papers are indexed individually. (J.P.N.)

Report of the surface science workshop

International Nuclear Information System (INIS)

Somorjai, G.A.; Yates, J.T. Jr.; Clinton, W.

1977-03-01

A three-day workshop was held to review the various areas of energy development and technology in which surface science plays major roles and makes major contributions, and to identify the major surface-science-related problem areas in the fields with ERDA's mission in the fossil, nuclear, fusion, geothermal, and solar energy technologies and in the field of environmental control. The workshop activities are summarized

Proceedings: 2001 ASME/EPRI Radwaste Workshop

International Nuclear Information System (INIS)

2001-01-01

Nuclear utilities continually evaluate methods to improve operations and reduce costs associated with radioactive waste management. The continuing deregulation process has increased the emphasis on this activity. The Annual ASME/EPRI Workshop facilitates this effort by communicating technology and management improvements throughout the industry. This workshop, restricted to utility radwaste professionals, also serves to communicate practical in-plant improvements with the opportunity to discuss them in detail

Workshop on low energy neutrino physics

International Nuclear Information System (INIS)

2009-01-01

The main topics of the workshop are: the determination of the neutrino mixing angle theta-13, the experiments concerning the monitoring of reactors based on the measurement of neutrino spectra, solar neutrinos, supernovae neutrinos, geo-neutrinos, neutrino properties, neutrinoless double beta decay and future low energy neutrino detectors. This document gathers together the program of the workshop, the slides of the presentations, some abstracts and some posters

Workshop 1: Geosynthetics in Transportation Geotechnics

OpenAIRE

Tatsuoka, Fumio; Zornberg, Jorge; Machado do Vale, José Luís; Neves, José

2016-01-01

This book contains the extended abstracts of the Workshop 1 - Geosynthetics in Transportation Geotechnics - of the 3rd International Conference on Transportation Geotechnics, 4-7 September 2016, Guimarães, Portugal. The main goals of the workshop were: state-of-the-art of the use of geosynthetics in transportation geotechnics; theory and research of geosynthetics engineering for transportation engineering; key issues in practice; and perspective.

The Astronomy Workshop

Science.gov (United States)

Hamilton, D. P.

2005-05-01

The Astronomy Workshop (http://janus.astro.umd.edu) is a collection of interactive online educational tools developed for use by students, educators, and the general public. The more than 20 tools in the Astronomy Workshop are rated for ease-of-use, and have been extensively tested in large university survey courses, classes for undergraduate majors, and High Schools. Here we briefly describe a few of the more popular tools. The Life of the Sun (New!): The history of the Sun is animated as a movie, showing students how the size and color of our star has evolved and will evolve in time. Animated Orbits of Planets and Moons: The orbital motions of planets, moons, asteroids, and comets are animated at their correct relative speeds in accurate to-scale drawings. Solar System Collisions: This most popular of our applications shows what happens when an asteroid or comet with user-defined size and speed impacts a given planet. The program calculates many effects, including the country of impact (if Earth is the target), energy of explosion, crater size, and magnitude of the ``planetquake'' generated. It also displays a relevant image (e.g. terrestrial crater, lunar crater, etc.). Astronomical Distances: Travel away from the Earth at a chosen speed and see how long it takes to reach other planets, stars and galaxies. This tool helps students visualize astronomical distances in an intuitive way. Funding for the Astronomy Workshop is provided by a NASA EPO grant.

Report of the second Human Genome Diversity workshop

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-12-31

The Second Human Genome Diversity Workshop was successfully held at Penn State University from October 29--31, 1992. The Workshop was essentially organized around 7 groups, each comprising approximately 10 participants, representing the sampling issues in different regions of the world. These groups worked independently, using a common format provided by the organizers; this was adjusted as needed by the individual groups. The Workshop began with a presentation of the mandate to the participants, and of the procedures to be followed during the workshop. Dr. Feldman presented a summary of the results from the First Workshop. He and the other organizers also presented brief comments giving their perspective on the objectives of the Second Workshop. Dr. Julia Bodmer discussed the study of European genetic diversity, especially in the context of the HLA experience there, and of plans to extend such studies in the coming years. She also discussed surveys of world HLA laboratories in regard to resources related to Human Genome Diversity. Dr. Mark Weiss discussed the relevance of nonhuman primate studies for understanding how demographic processes, such as mate exchange between local groups, affected the local dispersion of genetic variation. Primate population geneticists have some relevant experience in interpreting variation at this local level, in particular, with various DNA fingerprinting methods. This experience may be relevant to the Human Genome Diversity Project, in terms of practical and statistical issues.

MATHEON Workshop 2013

CERN Document Server

Calderbank, Robert; Kutyniok, Gitta; Vybíral, Jan

2015-01-01

Since publication of the initial papers in 2006, compressed sensing has captured the imagination of the international signal processing community, and the mathematical foundations are nowadays quite well understood. Parallel to the progress in mathematics, the potential applications of compressed sensing have been explored by many international groups of, in particular, engineers and applied mathematicians, achieving very promising advances in various areas such as communication theory, imaging sciences, optics, radar technology, sensor networks, or tomography. Since many applications have reached a mature state, the research center MATHEON in Berlin focusing on "Mathematics for Key Technologies", invited leading researchers on applications of compressed sensing from mathematics, computer science, and engineering to the "MATHEON Workshop 2013: Compressed Sensing and its Applications” in December 2013. It was the first workshop specifically focusing on the applications of compressed sensing. This book featur...

Stimulation of ICT/domotics in houses. The organization of 2 workshops. Final report; De bevordering van ICT/domotica in woningen. De organisatie van 2 workshops. Eindrapport

Energy Technology Data Exchange (ETDEWEB)

Romer, J.C. [ECN Duurzame Energie in de Gebouwde Omgeving DEGO, Petten (Netherlands)

2003-07-01

The title project concerns the organization of two workshops on two concrete projects: (1) a building project for 43 dwellings for elderly people in Anna Paulowna, Netherlands, and (2) the building of a home for the elderly people (called Parkzicht) in Hippolytushoef, Netherlands. Preparatory activities for and the organization of the two workshops are described. The first workshop was held October 4th, 2002. The second workshop was planned for December 13th, 2002, but was cancelled. [Dutch] Een overzicht wordt gegeven van de activiteiten die hebben plaatsgevonden rond 2 concreet te realiseren projecten in Noord-Holland. De activiteiten bestaan uit de voorbereidende activiteiten en de organisatie van twee workshops. Een van de projecten betreft de bouw van 43 woningen voor senioren in Anna Paulowna en het andere project betreft de bouw van het verzorgingstehuis Parkzicht in Hippolytushoef. De 'Anna Paulowna' workshop werd 4 oktober 2002 gehouden. De Hippolytushoef workshop was gepland op 13 december 2002 maar is niet doorgegaan.

2003 RIA R AND D WORKSHOP

International Nuclear Information System (INIS)

OZAKI, S.

2003-01-01

The 2003 RIA R and D Workshop was held on August 26-28, 2003 at the Four Points Sheraton Hotel in Bethesda, Maryland. This Workshop was chaired by Satoshi Ozaki of BNL and sponsored by the Nuclear Physics Division of DOE, with the help of Oak Ridge Institute for Science and Education (ORISE). The purpose of this workshop was to understand the present status of R and D efforts for RIA, to evaluate the needs for further R and D, and to identify opportunities for international collaborations. The workshop examined and documented the current pre-conceptual design for RIA, identifying areas where decisions on technical options remain. The status of the current RIA R and D program was documented, recognizing areas where efforts were needed in light of what had been learned. The ongoing and planned R and D activities for operating and planned rare-isotope facilities were presented, enabling the workshop to be a venue to develop coordinated R and D efforts of mutual benefit to U.S. and international efforts. The scientific program for the first day (August 26, 2003) consisted mostly of invited talks presented by major research groups involved in RIA and other RI beam facilities. The talks included those covering: Science of RIA and the RIA Facility Performance Requirements; The Reference RIA Facility Pre-CDR design that was used for the NSAC cost exercise (M. Harrison Sub-Panel) in January 2001; New or latest perspectives on the RIA design at ANL and MSU; and RI Beam facility plans and overview of the R and D activities at overseas laboratories. The second day (August 27, 2003) was devoted to contributed talks on continuing R and D, including that which had been supported by DOE RIA R and D funds. The third day (August 28, 2003) began with open panel discussions in the morning, including further input from participants. The panel members discussed the present status of the RIA planning and R and D needs in a closed session for the rest of the day, and then worked on report

The EADGENE and SABRE post-analyses workshop

DEFF Research Database (Denmark)

Jaffrezic, Florence; Hedegaard, Jakob; Sancristobal, Magali

2009-01-01

of phenotypic outcomes using gene expression results. Prior to the workshop, we distributed two sets of data to the workshop participants. The first set of gene expression data deals with experimental challenge of chicken with two types of Eimeria. This experiment is described in some detail in one...

Workshop on gravitational waves and relativistic astrophysics

Indian Academy of Sciences (India)

Discussions related to gravitational wave experiments viz. LIGO and LISA as well as to observations of supermassive black holes dominated the workshop sessions on gravitational waves and relativistic astrophysics in the ICGC-2004. A summary of seven papers that were presented in these workshop sessions has been ...

32 CFR 705.30 - Aerospace Education Workshop.

Science.gov (United States)

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Aerospace Education Workshop. 705.30 Section 705... REGULATIONS AND OFFICIAL RECORDS PUBLIC AFFAIRS REGULATIONS § 705.30 Aerospace Education Workshop. (a) This... of Naval Operations has cognizance of all assistance provided by the Navy to all Aerospace Education...

NSUF Ion Beam Investment Options Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Heidrich, Brenden John [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-03-01

The workshop that generated this data was convened to develop a set of recommendations (a priority list) for possible funding in the area of US domestic ion beam irradiation capabilities for nuclear energy-focused RD&D. The results of this workshop were intended for use by the Department of Energy - Office of Nuclear Energy (DOE-NE) for consideration of support for these facilities. The workshop considered, as part of the initial potential future support discussions, input submitted through the Office of Nuclear Energy Request for Information (RFI) (DE-SOL-0008318, April 13, 2015), but welcomed discussion (and presentation) of other options, whether specific or general in scope. Input from users, including DOE-NE program interests and needs for ion irradiation RD&D were also included. Participants were selected from various sources: RFI respondents, NEUP/NEET infrastructure applicants, universities with known expertise in nuclear engineering and materials science and other developed sources. During the three days from March 22-24, 2016, the workshop was held at the Idaho National Laboratory Meeting Center in the Energy Innovation Laboratory at 775 University Drive, Idaho Falls, ID 83401. Thirty-one members of the ion beam community attended the workshop, including 15 ion beam facilities, six representatives of Office of Nuclear Energy R&D programs, an industry representative from EPRI and the chairs of the NSUF User’s Organization and the NSUF Scientific Review Board. Another four ion beam users were in attendance acting as advisors to the process, but did not participate in the options assessment. Three members of the sponsoring agency, the Office of Science and Technology Innovation (NE-4) also attended the workshop.

YEREVAN: Acceleration workshop

International Nuclear Information System (INIS)

Anon.

1989-01-01

Sponsored by the Yerevan Physics Institute in Armenia, a Workshop on New Methods of Charged Particle Acceleration in October near the Nor Amberd Cosmic Ray Station attracted participants from most major accelerator centres in the USSR and further afield

Workshop summary of 'nuclear knowledge management: Present status and perspective'

International Nuclear Information System (INIS)

Yonezawa, Minoru

2007-03-01

The workshop on 'Nuclear Knowledge Management (NKM): Present Status and Perspective' was held at the Tokyo Institute of Technology (supported by the Japan Atomic Energy Agency), Tokyo, Japan on the 14th and 15th of December 2006. The purpose of the workshop is to introduce NKM activities inside and outside Japan so that concerned parties/professionals could share related information and enhance awareness of the issues on NKM. Participants from various sectors, such as authorities, industry, universities/research institutes, etc, made presentations. Issues on NKM are recognized and discussed. The workshop consisted of 18 oral lectures and a panel discussion. The 55 participants attended the workshop. Under permission of the Tokyo Institute of Technology which is the sponsor of the workshop, this report compiles these lecture's presentation materials which got permission of a lecturer and synopses which were submitted after the workshop. (author)

Proceedings ML Family/OCaml Users and Developers workshops

OpenAIRE

Kiselyov, Oleg; Garrigue, Jacques

2015-01-01

This volume collects the extended versions of selected papers originally presented at the two ACM SIGPLAN workshops: ML Family Workshop 2014 and OCaml 2014. Both were affiliated with ICFP 2014 and took place on two consecutive days, on September 4 and 5, 2014 in Gothenburg, Sweden. The ML Family workshop aims to recognize the entire extended family of ML and ML-like languages: languages that are Higher-order, Typed, Inferred, and Strict. It provides the forum to discuss common issues, both pr...

Workshop Results: Teaching Geoscience to K-12 Teachers

Science.gov (United States)

Nahm, A.; Villalobos, J. I.; White, J.; Smith-Konter, B. R.

2012-12-01

A workshop for high school and middle school Earth and Space Science (ESS) teachers was held this summer (2012) as part of an ongoing collaboration between the University of Texas at El Paso (UTEP) and El Paso Community College (EPCC) Departments of Geological Sciences. This collaborative effort aims to build local Earth science literacy and educational support for the geosciences. Sixteen teachers from three school districts from El Paso and southern New Mexico area participated in the workshop, consisting of middle school, high school, early college high school, and dual credit faculty. The majority of the teachers had little to no experience teaching geoscience, thus this workshop provided an introduction to basic geologic concepts to teachers with broad backgrounds, which will result in the introduction of geoscience to many new students each year. The workshop's goal was to provide hands-on activities illustrating basic geologic and scientific concepts currently used in introductory geology labs/lectures at both EPCC and UTEP to help engage pre-college students. Activities chosen for the workshop were an introduction to Google Earth for use in the classroom, relative age dating and stratigraphy using volcanoes, plate tectonics utilizing the jigsaw pedagogy, and the scientific method as a think-pair-share activity. All activities where designed to be low cost and materials were provided for instructors to take back to their institutions. A list of online resources for teaching materials was also distributed. Before each activity, a short pre-test was given to the participants to gauge their level of knowledge on the subjects. At the end of the workshop, participants were given a post-test, which tested the knowledge gain made by participating in the workshop. In all cases, more correct answers were chosen in the post-test than the individual activity pre-tests, indicating that knowledge of the subjects was gained. The participants enjoyed participating in these

Workshop on PSA for New and Advanced Reactors

International Nuclear Information System (INIS)

2012-01-01

This workshop was organized by the NEA Working Group on Risk Assessment (WGRISK). The key objective of the workshop was to share the current state-of-the art on the PSA (Probabilistic Safety Assessment) applied for new reactors and advanced reactors. Fifty experts from 13 countries and one international organization (IAEA) participated in the present workshop, and 35 technical papers were presented. The main topics of interest, discussed during the workshop, included the followings: regulatory aspects, risk-informed methods, technical aspects of the PSA for new and advanced reactors, hazards of PSA (internal and external), severe accident/source term/Level 2 PSA, and consequence analysis/Level 3 PSA. Among the technical aspects of the PSA, the assessment of the reliability of passive safety systems appears to be a recurrent issue

1st AAU Workshop on Human-Centered Robotics

DEFF Research Database (Denmark)

The 2012 AAU Workshop on Human-Centered Robotics took place on 15 Nov. 2012, at Aalborg University, Aalborg. The workshop provides a platform for robotics researchers, including professors, PhD and Master students to exchange their ideas and latest results. The objective is to foster closer...... interaction among researchers from multiple relevant disciplines in the human-centered robotics, and consequently, to promote collaborations across departments of all faculties towards making our center a center of excellence in robotics. The workshop becomes a great success, with 13 presentations, attracting...... more than 45 participants from AAU, SDU, DTI and industrial companies as well. The proceedings contain 7 full papers selected out from the full papers submitted afterwards on the basis of workshop abstracts. The papers represent major research development of robotics at AAU, including medical robots...

7th International Workshop on Statistical Simulation

CERN Document Server

Mignani, Stefania; Monari, Paola; Salmaso, Luigi

2014-01-01

The Department of Statistical Sciences of the University of Bologna in collaboration with the Department of Management and Engineering of the University of Padova, the Department of Statistical Modelling of Saint Petersburg State University, and INFORMS Simulation Society sponsored the Seventh Workshop on Simulation. This international conference was devoted to statistical techniques in stochastic simulation, data collection, analysis of scientific experiments, and studies representing broad areas of interest. The previous workshops took place in St. Petersburg, Russia in 1994, 1996, 1998, 2001, 2005, and 2009. The Seventh Workshop took place in the Rimini Campus of the University of Bologna, which is in Rimini’s historical center.

The GRIP method for collaborative roadmapping workshops

DEFF Research Database (Denmark)

Piirainen, Kalle

2015-01-01

Technology roadmapping is a well-known tool for technology management, but practical advice for facilitating collaborative roadmapping workshops is relatively scarce. To cater for this need, we have designed a method for collaborative roadmapping, dubbed the GRIP method, for facilitating group work...... in TRM workshops. The design is based on establish best practices in facilitation and our experiences with the method suggest it is a feasible tool for technology managers. The benefits of the method are that it enables engaging a diverse group of individuals to the roadmapping process effectively even...... during a short workshop session and facilitates shared understanding on the technology management issues....

Intellectual disability, oncogenes and tumour suppressor genes

Indian Academy of Sciences (India)

M. Bidart1 2 3 C. Coutton4 5 3. Plateforme Protéomique et Transcriptomique Clinique, Pole Recherche, CHU Grenoble, 38043 Grenoble, France; Equipe, Nanomédecine et Cerveau, Inserm U836, Grenoble Institut Neurosciences, 38000 Grenoble, France; Université Joseph Fourier, 38000 Grenoble, France; Département ...

OpenShift Workshop

CERN Multimedia

CERN. Geneva; Rodriguez Peon, Alberto

2017-01-01

Workshop to introduce developers to the OpenShift platform available at CERN. Several use cases will be shown, including deploying an existing application into OpenShift. We expect attendees to realize about OpenShift features and general architecture of the service.

DNA Microarray Workshop

National Research Council Canada - National Science Library

Lauro, Bernie

1999-01-01

.... Funding for the workshop was provided by the US Department of Defense (USAMRAA). The aim of the meeting was to discuss how to best use the data derived from the Malaria Genome Sequencing Project for the functional analysis of the genome...

WESTPAC Workshop on Coastal Transport of Pollutants (Tokyo, Japan, March 27-31, 1980). Summary Report. Workshop Report No. 24.

Science.gov (United States)

United Nations Educational, Scientific, and Cultural Organization, Paris (France). Intergovernmental Oceanographic Commission.

Provided is a 4-page summary of the WESTPAC (Western Pacific) Workshop On Coastal Transport of Pollutants and five appendices. Workshop objectives were to review present knowledge of the physical dispersion, accumulation, and transportation of pollutants, and analytical methods and data processing in the Western Pacific Region; identify major…

Student Feedback of Career Development Workshops for Program Improvement

Science.gov (United States)

LeBeau, J. E.; Pressley, S. N.

2016-12-01

A number of techniques are employed each year to evaluate the effectiveness of and to identify opportunities for improvement in the Laboratory for Atmospheric Research (LAR) REU program at Washington State University. For example, information gathered from pre-/post-surveys and pre-/post-interviews provides information regarding students' perceptions and levels of experience with the scientific process, career and academic goals, and motivation for joining the REU program. Poster session rubrics assess students' abilities to summarize their experiences in a professional setting. Alumni surveys gauge former participants' perceptions of the REU experience. One seemingly simple and highly useful, but often less documented, component of the evaluation process for program improvement is the use of workshop feedback forms. Weekly workshops are designed to provide students with enhanced knowledge and skills in the area of atmospheric chemistry as well as research design skills, academic and career guidance, and presentation skills. According to previous years' evaluation reports, workshops are largely beneficial to students for learning new skills. Yet, students suggest a number of recommendations that may benefit any REU program, such as: providing slides beforehand to provide a framework for the upcoming workshop, having instructors speak in more student-friendly language, covering higher-level topics, and including more hands-on, instructor-guided practice during the workshops. Thus, workshop feedback forms provide meaningful feedback to increase learning outcomes and enhance the REU student experience. This presentation will offer ideas gathered from over five years of workshop feedback forms that, while somewhat specific to workshops offered for the LAR REU, can offer faculty and PIs insight into the student experience, enhancing their ability to improve programming and achieve greater learning outcomes.

IGORR 2: Proceedings of the 2. meeting of the International Group On Research Reactors

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-07-01

The International group on Research Reactors was formed to facilitate the sharing of knowledge and experience among those institutions and individuals who are actively working to design, build, and promote new research reactors or to make significant upgrades to existing facilities. Sessions during this second meeting were devoted to research reactor reports (GRENOBLE reactor, FRM-II, HIFAR, PIK, reactors at JAERI, MAPLE, ANS, NIST, MURR, TRIGA, BR-2, SIRIUS 2); other neutron sources; and two workshops were dealing with research and development results and needs and reports on progress in needed of R and D areas identified at IGORR 1.

IGORR 2: Proceedings of the 2. meeting of the International Group On Research Reactors

International Nuclear Information System (INIS)

1992-01-01

The International group on Research Reactors was formed to facilitate the sharing of knowledge and experience among those institutions and individuals who are actively working to design, build, and promote new research reactors or to make significant upgrades to existing facilities. Sessions during this second meeting were devoted to research reactor reports (GRENOBLE reactor, FRM-II, HIFAR, PIK, reactors at JAERI, MAPLE, ANS, NIST, MURR, TRIGA, BR-2, SIRIUS 2); other neutron sources; and two workshops were dealing with research and development results and needs and reports on progress in needed of R and D areas identified at IGORR 1

Summary of the Workshop on Neutron Cross Section Covariances

International Nuclear Information System (INIS)

Smith, Donald L.

2008-01-01

A Workshop on Neutron Cross Section Covariances was held from June 24-27, 2008, in Port Jefferson, New York. This Workshop was organized by the National Nuclear Data Center, Brookhaven National Laboratory, to provide a forum for reporting on the status of the growing field of neutron cross section covariances for applications and for discussing future directions of the work in this field. The Workshop focused on the following four major topical areas: covariance methodology, recent covariance evaluations, covariance applications, and user perspectives. Attention was given to the entire spectrum of neutron cross section covariance concerns ranging from light nuclei to the actinides, and from the thermal energy region to 20 MeV. The papers presented at this conference explored topics ranging from fundamental nuclear physics concerns to very specific applications in advanced reactor design and nuclear criticality safety. This paper provides a summary of this workshop. Brief comments on the highlights of each Workshop contribution are provided. In addition, a perspective on the achievements and shortcomings of the Workshop as well as on the future direction of research in this field is offered

Physics beyond Colliders Kickoff Workshop

CERN Document Server

2016-01-01

The aim of the workshop is to explore the opportunities offered by the CERN accelerator complex and infrastructure to get new insights into some of today's outstanding questions in particle physics through projects complementary to high-energy colliders and other initiatives in the world. The focus is on fundamental physics questions that are similar in spirit to those addressed by high-energy colliders, but that may require different types of experiments. The kickoff workshop is intended to stimulate new ideas for such projects, for which we encourage the submission of abstracts.

Workshop on Physics Beyond Colliders

CERN Document Server

2016-01-01

The aim of the workshop is to explore the opportunities offered by the CERN accelerator complex and infrastructure to get new insights into some of today's outstanding questions in particle physics through projects complementary to high-energy colliders and other initiatives in the world. The focus is on fundamental physics questions that are similar in spirit to those addressed by high-energy colliders, but that may require different types of experiments. The kick-off workshop is intended to stimulate new ideas for such projects, for which we encourage the submission of abstracts.

Extreme Conditions Modeling Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Coe, R. G.; Neary, V. S.; Lawson, M. J.; Yu, Y.; Weber, J.

2014-07-01

Sandia National Laboratories (SNL) and the National Renewable Energy Laboratory (NREL) hosted the Wave Energy Converter (WEC) Extreme Conditions Modeling (ECM) Workshop in Albuquerque, NM on May 13th-14th, 2014. The objective of the workshop was to review the current state of knowledge on how to model WECs in extreme conditions (e.g. hurricanes and other large storms) and to suggest how U.S. Department of Energy (DOE) and national laboratory resources could be used to improve ECM methods for the benefit of the wave energy industry.

Summary of experimental insertions workshop

International Nuclear Information System (INIS)

Sandweiss, J.; Month, M.

1976-01-01

The last ISABELLE workshop of the summer 1976 series, which was held at Brookhaven, August 16-20, focused on the design and utilization of the experimental insertions. The goals of the workshop, which were somewhat more general than might be suggested by the title, are: (1) review the ISABELLE proposal from the point of view of experimental use; (2) contribute useful information on the ''open questions'' in the ISABELLE design; (3) develop data for experimental equipment and operating cost estimates; and (4) project a first approximation to ISABELLE operating modes

Insider Threat Mitigation Workshop Instructional Materials

Energy Technology Data Exchange (ETDEWEB)

Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Larsen, Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); O' Brien, Mike [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Rodriquez, Jose [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2008-01-01

Insiders represent a formidable threat to nuclear facilities. This set of workshop materials covers methodologies to analyze and approaches to mitigate the threat of an insider attempting abrupt theft of nuclear materials. This report is a compilation of workshop materials consisting of lectures on technical and administrative measures used in Physical Protection (PP) and Material Control and Accounting (MC&A) and methods for analyzing their effectiveness against a postulated insider threat.

Workshop on Accelerator Operation (WAO 2001)

International Nuclear Information System (INIS)

Bailey, R.

2001-01-01

The 3rd Workshop on Accelerator Operation (WAO 2001) followed earlier workshops in 1996 and 1998. Most topics relevant for the efficient and effective operation of accelerators were covered. These included the tools and utilities necessary in the control rooms; the organization of accelerator operation (process monitoring, shift work, stress); the monitoring of beam quality; safety issues and standards; and questions particularly relevant for superconducting accelerators, in particular cryogenics. (author)

Report of the surface science workshop

Energy Technology Data Exchange (ETDEWEB)

Somorjai, G.A.; Yates, J.T. Jr.; Clinton, W.

1977-03-01

A three-day workshop was held to review the various areas of energy development and technology in which surface science plays major roles and makes major contributions, and to identify the major surface-science-related problem areas in the fields with ERDA's mission in the fossil, nuclear, fusion, geothermal, and solar energy technologies and in the field of environmental control. The workshop activities are summarized. (GHT)

Proceedings: 2000 ASME/EPRI Radwaste Workshop

International Nuclear Information System (INIS)

2001-01-01

Nuclear utilities are continually evaluating methods to improve operations and reduce costs associated with radioactive waste management. The continuing deregulation process has added increased emphasis to this activity. The Annual ASME/EPRI Workshop facilitates this effort by communicating technological and managerial improvements throughout the industry. This workshop, restricted to utility radwaste professionals, also serves to communicate practical in-plant improvements with the opportunity to discuss them in detail

Diversity in Action workshop | 18 September | Business Centre Technoparc

CERN Multimedia

2015-01-01

After two years, five successful editions and plenty of positive feedback, we are happy to announce the sixth edition of our Diversity in Action workshop.   Seize the opportunity and participate in this half-day interactive workshop designed to explore the meaning and importance of diversity at CERN. Using participative multimedia methods, this workshop will provide participants with insights into the different dimensions of diversity, help to develop greater sensitivity to differences, and explore ways to recognise and overcome biases and thereby strengthen our tradition of inclusiveness at CERN. “For me it was a great opportunity to talk about diversity issues with other people at CERN who I would never have met otherwise,” says Alex Brown, who participated in the third edition of the workshop. “The discussions I was involved in inspired connections that are still active.” Diversity in Action workshop – sixth...

Solar workshops financial incentives

Energy Technology Data Exchange (ETDEWEB)

None

1979-01-01

Ten one-day workshops were held across the United States. Information in this workbook is compiled in conjunction with those workshops. The following discussions are included: solar as a fuel (history); why alternative fuels are being sought today; the need for conservation; advantages of solar energy; the potential of solar energy; why solar energy is not more widely used; a definition of solar; how solar can help meet energy demands; Federal policies and programs; what solar technologies exist today that can be effectively utilized (thermal applications, fuels from biomass, solar electric). Additional information is presented in three attachments: Energy-Conserving Methods; Domestic Policy Review of Solar Energy; and DOE Secretary's Annual Report to Congress-Solar Section. (MCW)

Rolling Contact Fatigue Workshop July 26-27, 2011

Science.gov (United States)

2012-08-01

In July 2011, the Transportation Technology Center, Inc., coordinated the joint Federal Railroad Association/Association of American Railroads Workshop on Rolling Contact Fatigue (RCF). The workshop was held at the Congress Plaza Hotel in Chicago, IL...

Workshop for middle school and high school educators

International Nuclear Information System (INIS)

Miller, D.W.

1992-01-01

This paper summarizes the workshop entitled, 'Understanding and Teaching about Nuclear Technology and Its Place in Our Society' presented at Ohio State University (OSU) in August 1991. The workshop was a collaborative program with the American Nuclear Society (ANS) taking the lead and OSU taking a supportive and facilitator role. The paper addresses the issues of program management and development. Because the program elements provided by the ANS are generic to other workshops they have sponsored, only the unique contributions made by OSU are discussed

The Halden Reactor Project workshop meeting on control room development

International Nuclear Information System (INIS)

Miberg, Ann Britt; Green, Marie; Haukenes, Hanne; Larsen, Marit; Seim, Lars Aage; Veland, Oeystein

1999-03-01

The 'Control Room Development' workshop was organised in. Halden, November 5-6, 1998. The purpose of the workshop was to bring forward recommendations for the future use of HAMMLAB with respect to control room development. The workshop comprised thirteen presentations summarising current issues and status in control room development projects and related projects. Following the presentations, five working groups were formed. The purpose of the working groups was to establish a set of recommendations for the future use of HAMMLAB. Each working group developed a set of recommendations. The outcomes of the working groups' discussions were summarised in plenum by the working group chairs. During the workshop, all participants excluding the Halden Project staff were asked to fill in a questionnaire indicating which research topics they found most interesting to pursue in future HAMMLAB research. The purpose of this report is to summarise the workshop participants' presentations, the working groups' discussions, and the recommendations given by the workshop participants concerning the future use of HAMMLAB (author) (ml)

Continuing Education Workshops in Bioinformatics Positively Impact Research and Careers.

Science.gov (United States)

Brazas, Michelle D; Ouellette, B F Francis

2016-06-01

Bioinformatics.ca has been hosting continuing education programs in introductory and advanced bioinformatics topics in Canada since 1999 and has trained more than 2,000 participants to date. These workshops have been adapted over the years to keep pace with advances in both science and technology as well as the changing landscape in available learning modalities and the bioinformatics training needs of our audience. Post-workshop surveys have been a mandatory component of each workshop and are used to ensure appropriate adjustments are made to workshops to maximize learning. However, neither bioinformatics.ca nor others offering similar training programs have explored the long-term impact of bioinformatics continuing education training. Bioinformatics.ca recently initiated a look back on the impact its workshops have had on the career trajectories, research outcomes, publications, and collaborations of its participants. Using an anonymous online survey, bioinformatics.ca analyzed responses from those surveyed and discovered its workshops have had a positive impact on collaborations, research, publications, and career progression.

Background Document for Workshop no.3 of Forest Carbon Management Workshop Series

International Nuclear Information System (INIS)

Griss, P.

2002-01-01

Pollution Probe has organized a series of workshops on forest carbon management (FCM) in Canada in order to examine the opportunities, policies and infrastructure for Canada. This report summarizes the events of the third workshop which explored the verification of carbon stocks in forests. It also incorporates the results of the first 2 workshops. There are substantial opportunities for greenhouse gas (GHG) emitters to obtain carbon credits through FCM. Canada, a proponent for the eligibility of FCM under the Kyoto Protocol, must develop these opportunities domestically although policies and infrastructure needed to support FCM activities are not yet clearly identified. The Kyoto Protocol allows developed countries to use international emissions trading to help meet emissions commitments. Details for emissions trading in Canada are still being negotiated and an effective forest-based methodology for carbon dioxide equivalent credit creation must be developed. This paper reviewed the role of forests in creating or canceling out removal units (RMUs) in deforestation, afforestation, reforestation, and forest management. From an FCM perspective, buyers of carbon credits have several choices in the development of their offset portfolio, including: (1) energy type versus carbon sinks, (2) forest sinks versus agricultural/soil sinks, (3) domestic projects versus international projects, and (4) Joint Implementation projects in developed countries versus Clean Development Mechanism projects in developing countries. tabs., figs., appendices

WORKSHOP: Scintillating crystals

Energy Technology Data Exchange (ETDEWEB)

Anon.

1992-12-15

Scintillating crystals are one of the big spinoff success stories of particle physics, and from 22-26 September an international workshop in Chamonix in the French Alps looked at the increasing role of these materials in pure and applied science and in industry.

WORKSHOP: Scintillating crystals

International Nuclear Information System (INIS)

Anon.

1992-01-01

Scintillating crystals are one of the big spinoff success stories of particle physics, and from 22-26 September an international workshop in Chamonix in the French Alps looked at the increasing role of these materials in pure and applied science and in industry

International workshop on multimodal virtual and augmented reality (workshop summary)

NARCIS (Netherlands)

Hürst, W.O.; Iwai, Daisuke; Balakrishnan, Prabhakaran

2016-01-01

Virtual reality (VR) and augmented reality (AR) are expected by many to become the next wave of computing with significant impacts on our daily lives. Motivated by this, we organized a workshop on “Multimodal Virtual and Augmented Reality (MVAR)” at the 18th ACM International Conference on

Proceedings of the Radon national action plan workshop

International Nuclear Information System (INIS)

Chevet, Pierre-Franck; Godet, Jean-Luc; Tirmarche, Margot; Strand, Per; Mrdakovic Popic, Jelena; Dysvik, Solveig; Skjold, Anne Marit; Vallet, Benoit; Van Deventer, Emilie; Colgan, Tony; ); Mundigl, Stefan; ); Magnusson, S.; Long, Bill; McBurney, Ruth; Thompson, P.A; Pollard, David; Fenton, David; Long, Stephanie; Dehandschutter, Boris; Murith, Christophe; Skeppstroem, Kirlna; Petrova, Karla; Davidkova, Jana; Pravdova, Eva; Kiselev, Sergey; Mc Coll, Neil; Vallet, Jeremie; Rannou, Alain; Kurttio, Paivi; Martinsen, Finn; Roulet, Claude-Alain; Goyette, Joelle; Frutos, Borja; Olaya, Manuel; Linares Alemparte, Pilar; Marinko, Janez; Garcia-Talavera, Marta; Pedrazzi, Lisa; Mc Laughlin, James; Gutierrez-Villanueva, Jose-Luis; Janssens, Augustin

2015-01-01

Following the publication of the new European Basic Safety Standards Directive (the Council Directive 2013/59/EURATOM ), published in January 2014, Member States of the European Union have 4 years to incorporate it and to prepare or update their strategy for reducing radon concentration and the associated national radon action plan. Under a joint initiative from ASN and NRPA, 20 European countries, represented by authorities in charge of Radiation Protection, Health, Labour and Housing and Landscaping were brought together during a workshop on national radon action plans. The objective of the workshop, held in ASN's premises, was to share the views and experiences concerning national strategies for reducing radon exposure of the population and associated lung cancer risk. The radon workshop was supported by the World Health Organisation (WHO), the International Atomic Energy Agency (IAEA), the Heads of European Radiation protection Control Authorities (HERCA) and the European Commission (EC). Authorities from USA (EPA, CRCPD), Canada (CNSC) and Russia (FMBA) and the European Radon Association (ERA) also participated in the workshop. This radon workshop has offered the opportunity to compare the actions in place or in preparation in different countries aiming at reducing radon exposure in home and dwellings, in buildings with public access (i.e. schools) and in workplaces. Preventive and corrective solutions, associated with incentives and communication to increase the public awareness, as well as education and training actions for different actors concerned, have been presented and discussed. The question about the relative place of regulation in the national strategy has been considered as an important key point. This document brings together the presentations (slides) given at the workshop. The main conclusions of the workshop are presented at the end of the document

Report of the workshop on realistic SSC lattices

International Nuclear Information System (INIS)

1985-10-01

A workshop was held at the SSC Central Design Group from May 29 to June 4, 1985, on topics relating to the lattice of the SSC. The workshop marked a shift of emphasis from the investigation of simplified test lattices to the development of a realistic lattice suitable for the conceptual design report. The first day of the workshop was taken up by reviews of accelerator system requirements, of the reference design solutions for these requirements, of lattice work following the reference design, and of plans for the workshop. The work was divided among four working groups. The first, chaired by David Douglas, concerned the arcs of regular cells. The second group, which studied the utility insertions, was chaired by Beat Leemann. The third group, under David E. Johnson, concerned itself with the experimental insertions, dispersion suppressors, and phase trombones. The fourth group, responsible for global lattice considerations and the design of a new realistic lattice example, was led by Ernest Courant. The papers resulting from this workshop are roughly divided into three sets: those relating to specific lattice components, to complete lattices, and to other topics. Among the salient accomplishments of the workshop were additions to and optimization of lattice components, especially those relating to lattices using 1-in-1 magnets, either horizontally or vertically separated, and the design of complete lattice examples. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database

Workshop on electroweak symmetry breaking: proceedings

International Nuclear Information System (INIS)

Hinchliffe, I.

1984-10-01

A theoretical workshop on electroweak symmetry breaking at the Superconducting Supercollider was held at Lawrence Berkeley Laboratory, June 4-22, 1984. The purpose of the workshop was to focus theoretical attention on the ways in which experimentation at the SSC could reveal manifestations of the phenomenon responsible for electroweak symmetry breaking. This issue represents, at present, the most compelling scientific argument for the need to explore the energy region to be made accessible by the SSC, and a major aim of the workshop was to involve a broad cross section of particle theorists in the ongoing process of sharpening the requirements for both accelerator and detector design that will ensure detection and identification of meaningful signals, whatever form the electroweak symmetry breaking phenomenon should actually take. Separate entries were prepared for the data base for the papers presented

Workshop on electroweak symmetry breaking: proceedings

Energy Technology Data Exchange (ETDEWEB)

Hinchliffe, I. (ed.)

1984-10-01

A theoretical workshop on electroweak symmetry breaking at the Superconducting Supercollider was held at Lawrence Berkeley Laboratory, June 4-22, 1984. The purpose of the workshop was to focus theoretical attention on the ways in which experimentation at the SSC could reveal manifestations of the phenomenon responsible for electroweak symmetry breaking. This issue represents, at present, the most compelling scientific argument for the need to explore the energy region to be made accessible by the SSC, and a major aim of the workshop was to involve a broad cross section of particle theorists in the ongoing process of sharpening the requirements for both accelerator and detector design that will ensure detection and identification of meaningful signals, whatever form the electroweak symmetry breaking phenomenon should actually take. Separate entries were prepared for the data base for the papers presented.

Cognition in Space Workshop. 1; Metrics and Models

Science.gov (United States)

Woolford, Barbara; Fielder, Edna

2005-01-01

"Cognition in Space Workshop I: Metrics and Models" was the first in a series of workshops sponsored by NASA to develop an integrated research and development plan supporting human cognition in space exploration. The workshop was held in Chandler, Arizona, October 25-27, 2004. The participants represented academia, government agencies, and medical centers. This workshop addressed the following goal of the NASA Human System Integration Program for Exploration: to develop a program to manage risks due to human performance and human error, specifically ones tied to cognition. Risks range from catastrophic error to degradation of efficiency and failure to accomplish mission goals. Cognition itself includes memory, decision making, initiation of motor responses, sensation, and perception. Four subgoals were also defined at the workshop as follows: (1) NASA needs to develop a human-centered design process that incorporates standards for human cognition, human performance, and assessment of human interfaces; (2) NASA needs to identify and assess factors that increase risks associated with cognition; (3) NASA needs to predict risks associated with cognition; and (4) NASA needs to mitigate risk, both prior to actual missions and in real time. This report develops the material relating to these four subgoals.

Workshop on electronuclear physics with internal targets: Proceedings

International Nuclear Information System (INIS)

Arnold, R.G.; Minehart, R.C.

1987-05-01

The Workshop on Electronuclear Physics with Internal Targets was held at SLAC on January 5-8, 1987. The idea for this workshop grew out of interest among physicists at SLAC and MIT/Bates who have been exploring the possibilities for internal targets in the PEP ring at SLAC and in a proposed stretcher ring at MIT/Bates. The aim of the workshop was to bring together physicists from these groups and from other laboratories and universities to discuss the new physics that could be made accessible with internal targets, and to share information on recent developments in internal target technology, on the impact of internal targets on ring operation, and on the detector requirements. The workshop was sponsored by NPAS, the program of Nuclear Physics at SLAC, and it was attended by more than 100 physicists from the US, Canada, Europe, and Japan. The workshop sessions began with two days of invited talks followed by two days of shorter presentations organized by the chairmen of four Working Groups. Written versions of all the plenary talks and all but four of the Working Group talks are presented here

Workshop on electronuclear physics with internal targets: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Arnold, R.G.; Minehart, R.C. (eds.)

1987-05-01

The Workshop on Electronuclear Physics with Internal Targets was held at SLAC on January 5-8, 1987. The idea for this workshop grew out of interest among physicists at SLAC and MIT/Bates who have been exploring the possibilities for internal targets in the PEP ring at SLAC and in a proposed stretcher ring at MIT/Bates. The aim of the workshop was to bring together physicists from these groups and from other laboratories and universities to discuss the new physics that could be made accessible with internal targets, and to share information on recent developments in internal target technology, on the impact of internal targets on ring operation, and on the detector requirements. The workshop was sponsored by NPAS, the program of Nuclear Physics at SLAC, and it was attended by more than 100 physicists from the US, Canada, Europe, and Japan. The workshop sessions began with two days of invited talks followed by two days of shorter presentations organized by the chairmen of four Working Groups. Written versions of all the plenary talks and all but four of the Working Group talks are presented here.

Spiral 2 workshop

International Nuclear Information System (INIS)

2004-01-01

The accelerator and experimental facilities at GANIL will be transformed over the next 5-10 years. The centerpiece of the additions to the accelerator complex will be Spiral-2. This is the first phase of a new radioactive beam facility based on the ISOL principle. The main aim of Spiral-2 will be to produce intense, high quality beams of neutron-rich nuclei created in neutron-induced fission of heavy elements and accelerated by the existing CIME cyclotron. The principal aims of this workshop will be a) to publicize the new facilities, b) to discuss and define the science which might be carried out with them, c) to discuss the instrumentation and infrastructure required to exploit the new facilities and d) to help form collaborations of scientists wishing to design and construct the equipment needed to undertake the science programme. This document gathers most of the slides presented in the workshop

Spiral 2 workshop

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

The accelerator and experimental facilities at GANIL will be transformed over the next 5-10 years. The centerpiece of the additions to the accelerator complex will be Spiral-2. This is the first phase of a new radioactive beam facility based on the ISOL principle. The main aim of Spiral-2 will be to produce intense, high quality beams of neutron-rich nuclei created in neutron-induced fission of heavy elements and accelerated by the existing CIME cyclotron. The principal aims of this workshop will be a) to publicize the new facilities, b) to discuss and define the science which might be carried out with them, c) to discuss the instrumentation and infrastructure required to exploit the new facilities and d) to help form collaborations of scientists wishing to design and construct the equipment needed to undertake the science programme. This document gathers most of the slides presented in the workshop.

77 FR 26509 - Notice of Public Meeting-Cloud Computing Forum & Workshop V

Science.gov (United States)

2012-05-04

...--Cloud Computing Forum & Workshop V AGENCY: National Institute of Standards & Technology (NIST), Commerce. ACTION: Notice. SUMMARY: NIST announces the Cloud Computing Forum & Workshop V to be held on Tuesday... workshop. This workshop will provide information on the U.S. Government (USG) Cloud Computing Technology...

Workshop on power plant cable condition monitoring: Proceedings

International Nuclear Information System (INIS)

Del Valle, L.

1988-07-01

A three-day workshop on cable condition monitoring was held in San Francisco on Fegruary 16--18, 1988. The workshop was cosponsored by the Nuclear Power, Electrical Systems, and Coal Combustion Systems Divisions of the Electric Power Research Institute. The primary objective of the workshop was to identify the state-of-the-art for cable condition monitoring. Twenty-five technical papers as well as EPRI research programs were presented at the technical sessions. Four working group sessions and one general session were held on each of two days. Each group session provided a forum for participants to exchange ideas and to discuss in more depth research for cable condition monitoring, existing and innovative testing technology, and utility and NRC needs for testing. Recommendations from the working groups were summarized and presented at the end of the workshop

Research Directions for Cyber Experimentation: Workshop Discussion Analysis.

Energy Technology Data Exchange (ETDEWEB)

DeWaard, Elizabeth [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Deccio, Casey [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Fritz, David Jakob [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Tarman, Thomas D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-10-01

Sandia National Laboratories hosted a workshop on August 11, 2017 entitled "Research Directions for Cyber Experimentation," which focused on identifying and addressing research gaps within the field of cyber experimentation , particularly emulation testbeds . This report mainly documents the discussion toward the end of the workshop, which included research gaps such as developing a sustainable research infrastructure, exp anding cyber experimentation, and making the field more accessible to subject matter experts who may not have a background in computer science . Other gaps include methodologies for rigorous experimentation, validation, and uncertainty quantification, which , if addressed, also have the potential to bridge the gap between cyber experimentation and cyber engineering. Workshop attendees presented various ways to overcome these research gaps, however the main conclusion for overcoming these gaps is better commun ication through increased workshops, conferences, email lists, and slack chann els, among other opportunities.

Proceedings -- US Russian workshop on fuel cell technologies

Energy Technology Data Exchange (ETDEWEB)

Baker, B.; Sylwester, A. [comps.

1996-04-01

On September 26--28, 1995, Sandia National Laboratories sponsored the first Joint US/Russian Workshop on Fuel Cell Technology at the Marriott Hotel in Albuquerque, New Mexico. This workshop brought together the US and Russian fuel cell communities as represented by users, producers, R and D establishments and government agencies. Customer needs and potential markets in both countries were discussed to establish a customer focus for the workshop. Parallel technical sessions defined research needs and opportunities for collaboration to advance fuel cell technology. A desired outcome of the workshop was the formation of a Russian/American Fuel Cell Consortium to advance fuel cell technology for application in emerging markets in both countries. This consortium is envisioned to involve industry and national labs in both countries. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

The Assessment and Management of Suicide Risk: State of Workshop Education

OpenAIRE

Pisani, Anthony R.; Cross, Wendi F.; Gould, Madelyn S.

2011-01-01

A systematic search of popular and scholarly databases identified workshops that addressed general clinical competence in the assessment or management of suicide risk, targeted mental health professionals, and had at least one peerreviewed publication. We surveyed workshop developers and examined empirical articles associated with each workshop. The state of workshop education is characterized by presenting the learning objectives, educational formats, instructor factors, and evaluation studi...

WE-AB-206-03: Workshop

International Nuclear Information System (INIS)

Lu, Z.

2016-01-01

The involvement of medical physicists in diagnostic ultrasound imaging service is increasing due to QC and accreditation requirements. The goal of this ultrasound hands-on workshop is to demonstrate quality control (QC) testing in diagnostic ultrasound and to provide updates in ACR ultrasound accreditation requirements. The first half of this workshop will include two presentations reviewing diagnostic ultrasound QA/QC and ACR ultrasound accreditation requirements. The second half of the workshop will include live demonstrations of basic QC tests. An array of ultrasound testing phantoms and ultrasound scanners will be available for attendees to learn diagnostic ultrasound QC in a hands-on environment with live demonstrations and on-site instructors. The targeted attendees are medical physicists in diagnostic imaging. Learning Objectives: Gain familiarity with common elements of a QA/QC program for diagnostic ultrasound imaging dentify QC tools available for testing diagnostic ultrasound systems and learn how to use these tools Learn ACR ultrasound accreditation requirements Jennifer Walter is an employee of American College of Radiology on Ultrasound Accreditation.

Proceedings of the TOUGH workshop

Energy Technology Data Exchange (ETDEWEB)

Pruess, K. [ed.

1990-09-01

A workshop on applications and enhancements of the TOUGH/MULKOM family of multiphase fluid and heat flow simulation programs was held at Lawrence Berkeley Laboratory on September 13--14, 1990. The workshop was attended by 62 scientists from seven countries with interests in geothermal reservoir engineering, nuclear waste isolation, unsaturated zone hydrology, environmental problems, and laboratory and field experimentation. The meeting featured 21 technical presentations, extended abstracts of which are reproduced in the present volume in unedited form. Simulator applications included processes on a broad range of space scales, from centimeters to kilometers, with transient times from seconds to geologic time scales. A number of code enhancements were reported that increased execution speeds for large 3-D problems by factors of order 20, reduced memory requirements, and improved user-friendliness. The workshop closed with an open discussion session that focussed on future needs and means for interaction in the TOUGH user community. Input from participants was gathered by means of a questionnaire that is reproduced in the appendix. 171 refs., 91 figs., 16 tabs.

Proceedings of the TOUGH workshop

International Nuclear Information System (INIS)

Pruess, K.

1990-09-01

A workshop on applications and enhancements of the TOUGH/MULKOM family of multiphase fluid and heat flow simulation programs was held at Lawrence Berkeley Laboratory on September 13--14, 1990. The workshop was attended by 62 scientists from seven countries with interests in geothermal reservoir engineering, nuclear waste isolation, unsaturated zone hydrology, environmental problems, and laboratory and field experimentation. The meeting featured 21 technical presentations, extended abstracts of which are reproduced in the present volume in unedited form. Simulator applications included processes on a broad range of space scales, from centimeters to kilometers, with transient times from seconds to geologic time scales. A number of code enhancements were reported that increased execution speeds for large 3-D problems by factors of order 20, reduced memory requirements, and improved user-friendliness. The workshop closed with an open discussion session that focussed on future needs and means for interaction in the TOUGH user community. Input from participants was gathered by means of a questionnaire that is reproduced in the appendix. 171 refs., 91 figs., 16 tabs

Workshop on crystals and focusing

Science.gov (United States)

Berreman, D. W.

1980-12-01

The purpose of the workshop on crystals and focusing was to exchange and pool the experience and information that the participants could contribute on the design and construction of monochromators for EXAFS with optimum speed, resolution and versatility. The panel was chaired by D.W. Berreman of BTL and included G. G. Cohen of NBS, S. Heald of Brookhaven National Labs and Lu Kun-quan of U. of Washington. Written contributions for the workshop were made by R. J. Emrich and J. R. Katzer of U. of Delaware, R. C. Gamble of Cal. Tech., J. Crane of Cal. Tech., and T. Matsushita of S. S. R. L. G. Bunker of U. of Washington was recording secretary, G. G. Cohen and S. Heald gave invited papers on the main program that were relevant to the workshop. Other contributors were R. Hänsel of U. of Kiel, W. Germany, G. Christoff of Ohio State and D. Hempstead of Rigaku/USA Inc., J. Holben of Marconi Avionics, Hertfordshire, England and J. Hastings of Brookhaven N. L.

The Second International Workshop on Bioprinting, Biopatterning and Bioassembly.

Science.gov (United States)

Mironov, Vladimir

2005-08-01

The Second International Workshop on Bioprinting, Biopatterning and Bioassembly was held at the Medical University of South Carolina (MUSC), located in the beautiful, historic city of Charleston. The workshop attracted > 50 participants from 10 different countries, including mechanical and chemical engineers, molecular, cell and developmental biologists, biophysicists, mathematicians, clinicians, humanists and artists. Bioprinting can be defined as computer-aided, automatic, layer-by-layer deposition, transfer and patterning of biologically relevant materials. The workshop goal was to gather the world's experts and leaders, present the latest results, assess future trends, explore new applications, and promote international collaborations and academic-industrial partnerships. The workshop demonstrated the multidisciplinary and global character of ongoing efforts in the development of bioprinting technology, galvanised an evolving community of bioprintists, and demonstrated feasibility as well as strong potential for a broad spectrum of applications of bioprinting technology. The Third International Workshop on Bioprinting, Biopatterning and Bioassembly is planned for Japan in 2006.

Waste Separations and Pretreatment Workshop report

International Nuclear Information System (INIS)

Cruse, J.M.; Harrington, R.A.; Quadrel, M.J.

1994-01-01

This document provides the minutes from the Waste Separations and Pretreatment Workshop sponsored by the Underground Storage Tank-Integrated Demonstration in Salt Lake City, Utah, February 3--5, 1993. The Efficient Separations and Processing-Integrated Program and the Hanford Site Tank Waste Remediation System were joint participants. This document provides the detailed minutes, including responses to questions asked, an attendance list, reproductions of the workshop presentations, and a revised chart showing technology development activities

The community development workshop, appendix B.

Science.gov (United States)

Brill, R.; Gastro, E.; Pennington, A. J.

1973-01-01

The Community Development Workshop is the name given to a collection of techniques designed to implement participation in the planning process. It is an electric approach, making use of current work in the psychology of groups, mathematical modeling and systems analysis, simulation gaming, and other techniques. An outline is presented for a session of the workshop which indicates some of the psychological techniques employed, i.e. confrontation, synectics, and encounter micro-labs.

The Future Workshop: Democratic problem solving

Directory of Open Access Journals (Sweden)

Rene Victor Valqui Vidal

2006-03-01

Full Text Available The origins, principles and practice of a very popular method known as The Future Workshop are presented. The fundamental theory and principles of this method are presented in an introductory way. In addition, practical guidelines to carry out such a workshop are outlined and several types of applications are shortly described. The crucial importance of both the facilitation process and the use of creative tools in team work are enhanced.

Executive Summary High-Yield Scenario Workshop Series Report

Energy Technology Data Exchange (ETDEWEB)

Leslie Park Ovard; Thomas H. Ulrich; David J. Muth Jr.; J. Richard Hess; Steven Thomas; Bryce Stokes

2009-12-01

To get a collective sense of the impact of research and development (R&D) on biomass resource availability, and to determine the feasibility that yields higher than baseline assumptions used for past assessments could be achieved to support U.S. energy independence, an alternate “High-Yield Scenario” (HYS) concept was presented to industry experts at a series of workshops held in December 2009. The workshops explored future production of corn/agricultural crop residues, herbaceous energy crops (HECs), and woody energy crops (WECs). This executive summary reports the findings of that workshop.

The December 2006 ATLAS Computing & Software Workshop

CERN Multimedia

Fred Luehring

The 29th ATLAS Computing & Software Workshop was held on December 11-15 at CERN. With the rapidly approaching onset of data taking, the workshop participants had an air of urgency about them. There was considerable discussion on hot topics such as physics validation of the software, data analysis, actual software production on the GRID, and the schedule of work for 2007 including the Final Dress Rehearsal (FDR). However don't be fooled, the workshop was not all work - there were also two social events which were greatly enjoyed by the attendees. The workshop welcomed Wouter Verkerke as the new Physics Validation Coordinator (replacing Davide Costanzo). Most recent validation work has centered on the 12.0.X release series that will be used for the Computing System Commissioning (CSC) exercise. The validation is now a big job because it needs to be done over a variety of conditions (magnetic field on/off, aligned/misaligned geometry) for every candidate release. Luckily there have been a large number of pe...

DOE Ocean Carbon Sequestration Research Workshop 2005

Energy Technology Data Exchange (ETDEWEB)

Sarmiento, Jorge L. [Princeton Univ., NJ (United States); Chavez, Francisco [Monterey Bay Aquarium Research Inst. (MBARI), Moss Landing, CA (United States); Maltrud, Matthew [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Adams, Eric [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Arrigo, Kevin [Stanford Univ., CA (United States). Dept. of Geophysics; Barry, James [Monterey Bay Aquarium Research Inst. (MBARI), Moss Landing, CA (United States); Carmen, Kevin [Louisiana State Univ., Baton Rouge, LA (United States); Bishop, James [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Bleck, Rainer [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Gruber, Niki [Univ. of California, Los Angeles, CA (United States); Erickson, David [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kennett, James [Univ. of California, Santa Barbara, CA (United States); Tsouris, Costas [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Tagliabue, Alessandro [Lab. of Climate and Environmental Sciences (LSCE), Gif-sur-Yvette (France); Paytan, Adina [Stanford Univ., CA (United States); Repeta, Daniel [Woods Hole Oceanographic Inst. (WHOI), Woods Hole, MA (United States); Yager, Patricia L. [Univ. of Georgia, Athens, GA (United States); Marshall, John [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Gnanadesikan, Anand [Geophysical Fluid Dynamics Lab. (GFDL), Princeton, NJ (United States)

2007-01-11

The purpose of this proposal was to fund a workshop to bring together the principal investigators of all the projects that were being funded under the DOE ocean carbon sequestration research program. The primary goal of the workshop was to interchange research results, to discuss ongoing research, and to identify future research priorities. In addition, we hoped to encourage the development of synergies and collaborations between the projects and to write an EOS article summarizing the results of the meeting. Appendix A summarizes the plan of the workshop as originally proposed, Appendix B lists all the principal investigators who were able to attend the workshop, Appendix C shows the meeting agenda, and Appendix D lists all the abstracts that were provided prior to the meeting. The primary outcome of the meeting was a decision to write two papers for the reviewed literature on carbon sequestration by iron fertilization, and on carbon sequestration by deep sea injection and to examine the possibility of an overview article in EOS on the topic of ocean carbon sequestration.

The future of nuclear weapons in Europe workshop summary

International Nuclear Information System (INIS)

Larsen, J.A.; Garrity, P.J.

1991-12-01

A summary is presented of a workshop that addressed the future of nuclear weapons in Europe. The workshop topics included the evolving European security environment; the Soviet Union, Eastern Europe, and nuclear weapons; the United States, NATO, and nuclear weapons; and Western Europe and nuclear weapons. The workshop, held at Los Alamos July 26, 1991, was sponsored by the Center for National Security Studies of the Los Alamos National Laboratory

SUPPORT FOR HU CFRT SUMMER HIGH SCHOOL FUSION WORKSHOP

International Nuclear Information System (INIS)

Punjabi, Alkesh

2010-01-01

Nine summer fusion science research workshops for minority and female high school students were conducted at the Hampton University Center for Fusion Research and Training from 1996 to 2005. Each workshop was of the duration of eight weeks. In all 35 high school students were mentored. The students presented 28 contributed papers at the annual meetings of the American Physical Society Division of Plasma Physics. These contributed papers were very well received by the plasma physics and fusion science research community. The students won a number of prestigious local, state, and national honors, awards, prizes, and scholarships. The notable among these are the two regional finalist positions in the 1999 Siemens-Westinghouse Science and Technology Competitions; 1st Place U.S. Army Award, 2006; 1st Place U.S. Naval Science Award, 2006; Yale Science and Engineering Association Best 11th Grade Project, 2006; Society of Physics Students Book Award, 2006; APS Corporate Minority Scholarship and others. This workshop program conducted by the HU CFRT has been an exemplary success, and served the minority and female students exceptionally fruitfully. The Summer High School Fusion Science Workshop is an immensely successful outreach activity conducted by the HU CFRT. In this workshop, we train, motivate, and provide high quality research experiences to young and talented high school scholars with emphasis on under-represented minorities and female students in fusion science and related areas. The purpose of this workshop is to expose minority and female students to the excitement of research in science at an early stage in their academic lives. It is our hope that this may lead the high school students to pursue higher education and careers in physical sciences, mathematics, and perhaps in fusion science. To our knowledge, this workshop is the first and only one to date, of fusion science for under-represented minorities and female high school students at an HBCU. The faculty

Processes and materials for photovoltaic applications. Workshop; Verfahren und Materialien fuer die Photovoltaik. Workshop

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

Solar energy will surely continue to be the most important renewable energy source. Since 1985, solar cell production has doubled every five years while the per unit price decreased continuously. This trend is expected to continue. Germany made important contributions both in the construction of new solar cell production plants and in the development of new PV materials and material combinations, as well as in technology and PV plant construction. The states of Thuringia and Saxony were significant contributors. In Thuringia, two solar cell production plants were constructed, while Saxon vacuum coating technology was used in nearly all new German production plants. This workshop presented the activities in Thuringia in Saxony. Contacts were to be established between partners from industry and research, joint projects were to be initiated, and society and politicians were to be informed on the success and new chances achieved. The workshop was held on the occasion of the termination of construction and the starting of experimental production of the ANTEC Solar GmbH factory at Rudisleben. [German] Im Mix der erneuerbaren Energien spielt die Solarenergie kuenftig wohl die wichtigste Rolle. Seit 1985 verdoppelt sich die Solarzellenproduktion in jeweils fuenf Jahren, gleichzeitig sank der Preis pro Leistungseinheit kontinuierlich. Dieser Trend wird weiter anhalten. Deutschland leistete in den letzten Jahren wichtige Beitraege zu dieser Entwicklung, sowohl beim Aufbau neuer Fertigungskapazitaeten fuer Solarzellen, als auch bei der Entwicklung neuer Photovoltaik-Materialien bzw. -Materialkombinationen und auf den Gebieten der Technologie und des Anlagenbaus. Der Anteil Thueringens und Sachsens an dieser positiven Entwicklung ist groesser als generell vermutet. In Thueringen entstanden zwei Unternehmen fuer die Solarzellenproduktion, der saechsische Vakuumbeschichtungs-Anlagenbau war am Aufbau fast aller neuen deutschen Fertigungsstaetten beteiligt. Auf dem Workshop werden

2012 right-of-way fatality & trespass prevention workshop

Science.gov (United States)

2013-04-30

Based on the success of the 2008 Trespasser Workshop, FRA and FTA sponsored this follow-on workshop. The keynote speech by FRA Administrator, Mr. Joseph C. Szabo, was followed by 23 technical presentations in the areas of Pedestrian Safety, Hazard Ma...

Advanced Grid Control Technologies Workshop Series | Energy Systems

Science.gov (United States)

: Smart Grid and Beyond John McDonald, Director, Technical Strategy and Policy Development, General Control Technologies Workshop Series In July 2015, NREL's energy systems integration team hosted workshops the Energy Systems Integration Facility (ESIF) and included a technology showcase featuring projects

Third Workshop on Affective Brain-Computer Interfaces: introduction

NARCIS (Netherlands)

Mühl, C.; Chanel, G.; Allison, B.; Nijholt, Antinus

2013-01-01

Following the first and second workshop on affective brain-computer interfaces, held in conjunction with ACII in Amsterdam (2009) and Memphis (2011), the third workshop explores the advantages and limitations of using neurophysiological signals for the automatic recognition of affective and

PROCEEDINGS OF RIKEN BNL RESEARCH CENTER WORKSHOP: VOLUME 61 RIKEN-TODAI MINI-WORKSHOP ON ''TOPICS IN HADRON PHYSICS AT RHIC''. VOLUME 61

International Nuclear Information System (INIS)

EN'YO, H.; HAMAGAKI, H.; HATSUDAT WATANABA, Y.; YAZAKI, K.

2004-01-01

The RIKEN-TODAI Mini-Workshop on ''Topics in Hadron Physics at RHIC'' was held on March 23rd and 24th, 2064 at the Nishina Memorial Hall of RIKEN, Wako, Saitama, Japan, sponsored by RIKEN (Institute of Physical and Chemical Research) and TODAI (University of Tokyo). The workshop was planned when we learned that two distinguished theorists in hadron physics, Professors L. McLerran and S.H. Lee, would be visiting TODAI and/or RIKEN during the week of March 22-26. We asked them to give key talks at the beginning of the workshop and attend the sessions consisting of talks by young theorists in RIKEN, TODAI and other institutes in Japan and they kindly agreed on both. Considering the JPS meeting scheduled from March 27 through 30, we decided to have a.one-and-half-a-day workshop on March 23 and 24. The purpose of the workshop was to offer young researchers an opportunity to learn the forefront of hadron physics as well as to discuss their own works with the distinguished theorists

Social Aspects of Bioenergy Sustainability Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Luchner, Sarah [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Johnson, Kristen [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Lindauer, Alicia [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); McKinnon, Taryn [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Broad, Max [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

2013-05-30

The Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy Bioenergy Technologies Office held a workshop on “Social Aspects of Bioenergy” on April 24, 2012, in Washington, D.C., and convened a webinar on this topic on May 8, 2012. The findings and recommendations from the workshop and webinar are compiled in this report.

Lunar Reconnaissance Orbiter Lunar Workshops for Educators, Year 1 Report

Science.gov (United States)

Jones, A. P.; Hsu, B. C.; Bleacher, L.; Shaner, A. J.; Dalton, H.

2011-12-01

This past summer, the Lunar Reconnaissance Orbiter (LRO) sponsored a series of weeklong professional development workshops designed to educate and inspire grade 6-12 science teachers: the Lunar Workshops for Educators. Participants learned about lunar science and exploration, gained tools to help address common student misconceptions about the Moon, heard some of the latest research results from LRO scientists, worked with LRO data, and learned how to bring these data to their students using hands-on activities aligned with grade 6-12 National Science Education Standards and Benchmarks. Where possible, the workshops also included tours of science facilities or field trips intended to help the teachers better understand mission operations or geologic processes relevant to the Moon. The workshops were very successful. Participants demonstrated an improved understanding of lunar science concepts in post-workshop assessments (as compared to identical pre-assessments) and a greater understanding of how to access and productively share data from LRO with their students and provide them with authentic research experiences. Participant feedback on workshop surveys was also enthusiastically positive. 5 additional Lunar Workshops for Educators will be held around the country in the summer of 2012. For more information and to register, visit http://lunar.gsfc.nasa.gov/lwe/index.html.

[A workshop to improve written communication skills of medical students].

Science.gov (United States)

Bitran, Marcela; Zúñiga, Denisse; Flotts, Paulina; Padilla, Oslando; Moreno, Rodrigo

2009-05-01

Despite being among the best academically prepared of the country, many medical students have difficulties to communicate in writing. In 2005, the School of Medicine at the Pontificia Universidad Católica de Chile introduced a writing workshop in the undergraduate curriculum, to enhance the students' writing skills. To describe the workshop and its impact on the writing skills of 3 cohorts of students. This 30-h workshop used a participative methodology with emphasis on deliberate practice and feedback. Students worked in small groups with a faculty member specially trained in writing. The qualities of the essays written before and after the workshop were compared. Essays were rated by a professional team that used an analytic rubric to measure formal aspects of text writing as well as more complex thinking processes. There was a significant improvement in the quality of the texts written after the workshop; the main changes occurred in argumentation, and in paragraph and text structure. This improvement was inversely proportional to the initial level of performance, and independent of gender. A writing workshop based on deliberate practice and personalized feedback is effective to enhance the writing proficiency of medical students. Due to its design, this workshop could be useful for students of other careers and universities.

Proceedings of the NOAMI workshop : a workshop to explore perspectives on risk assessment for orphaned and abandoned mines

International Nuclear Information System (INIS)

2009-03-01

This workshop hosted by the National Orphaned/Abandoned Mines Initiative (NOAMI) discussed risk assessment strategies and perspectives for orphaned and abandoned mines in Canada. Different perspectives related to the risk assessment process were considered by participants from local, provincial, federal, and territorial agencies as well as non-governmental, academic, and mining industry organizations. Strategies for effectively communicating with local communities were discussed. New methods of assessing risk related to bioavailability and bioaccessibility were reviewed along with approaches to risk assessment and risk management in relation to the Environmental Management Act. Case studies of risk assessment and remediation projects were presented. The workshop presentations were divided into the following 6 sessions: (1) keynote, (2) opening panel, (3) human health panel, (4) ecological panel, (5) geotechnical-safety risk assessment panel, and (6) case studies and perspectives. The workshop featured 22 presentations, of which 2 have been catalogued separately for inclusion in this database. A report on detailed ecological risk assessment (DERA) in British Columbia prepared by the Science Advisory Board for Contaminated Sites in British Columbia (BC) was included, as well as a final report that summarized presentations given at the workshop. refs., tabs., figs

Ten year's activity in the field of neutron scattering workshop

International Nuclear Information System (INIS)

Hamaguchi, Yoshikazu

2003-01-01

'Neutron scattering' is in the frame of the 'Utilization of Research Reactor's of the FNCA (Forum for Nuclear Cooperation in Asia) project, which held the workshops from FY 1992. This report is a summary of the results and activities of neutron scattering workshops and sub-workshops since the start in FY 1992. (author)

Practical guide to dosimetry as applied in the research reactors of the Saclay and Grenoble nuclear research centers; Guide pratique de la dosimetrie mise en oeuvre dans les reacteurs de recherche du C.E.N./G et du C.E.N./S

Energy Technology Data Exchange (ETDEWEB)

NONE

1968-07-01

Since the problems concerning neutron and gamma flux measurements which arise during irradiation experiments in the reactors in the Grenoble and Saclay Centres are of the same type, and since the solutions found are very often adopted in common, we have attempted to describe the methods we use at the present time. A brief description is given of the production of the detectors, the electronic apparatus; the formulae usually used for the interpretation of the measurements are given. A series of technical data cards give the most commonly used detector characteristics. These cards give the physical characteristics of the detectors, their nuclear constants, if any, the most suitable counting methods and the field of application. (authors) [French] Les problemes de mesures de flux de neutrons et de flux gamma qui se posent pour les experiences irradiees dans les reacteurs des Centres de Grenoble et de Saclay etant du meme type et les solutions trouvees, tres souvent adoptees en commun, nous avons cherche a decrire les methodes que nous pratiquons actuellement. On decrit tres brievement la fabrication des detecteurs, l'appareillage electronique; on rappelle les formules usuelles qui servent dans l'interpretation des mesures. Une serie de fiches techniques rassemble les caracteristiques des detecteurs les plus couramment utilises. Ces fiches indiquent les caracteristiques physiques des detecteurs, leurs constantes nucleaires s'il y a lieu, les methodes de comptage les mieux adaptees et le domaine d'utilisation. (auteurs)

Workshop: Community Based Environmental Decision Making, Proceedings of the Fifth Workshop in the Environmental Policy and Economics Workshop Series (2000)

Science.gov (United States)

Proceedings from a one-day workshop cosponsored by US EPA Office of Economy and Environment and National Center for Environmental Research and the National Science Foundation Decision, Risk,and Management Science Program on community-based decision making

1993 Radiation Protection Workshop: Proceedings

Energy Technology Data Exchange (ETDEWEB)

1993-12-31

The 1993 DOE Radiation Protection Workshop was conducted from April 13 through 15, 1993 in Las Vegas, Nevada. Over 400 Department of Energy Headquarters and Field personnel and contractors from the DOE radiological protection community attended the Workshop. Forty-nine papers were presented in eleven separate sessions: Radiological Control Manual Implementation, New Approaches to Instrumentation and Calibration, Radiological Training Programs and Initiatives, External Dosimetry, Internal Dosimetry, Radiation Exposure Reporting and Recordkeeping, Air Sampling and Monitoring Issues, Decontamination and Decommissioning of Sites, Contamination Monitoring and Control, ALARA/Radiological Engineering, and Current and Future Health Physics Research. Individual papers are indexed separately on the database.

Workshop on momentum distributions: Summary

International Nuclear Information System (INIS)

Simmons, R.O.

1988-01-01

This has been an extraordinary Workshop touching many branches of physics. The Workshop has treated momentum distributions in fluid and solid condensed matter, in nuclei, and in electronic systems. Both theoretical and experimental concepts and methods have been considered in all these branches. A variety of specific illustrations and applications in physical systems have been presented. One finds that some common unifying themes emerge. One finds, also, that some examples are available to illustrate where one branch is more mature than others and to contrast where expectations for future progress may be most encouraged. 6 refs., 2 figs

Intermediate-energy nuclear chemistry workshop

International Nuclear Information System (INIS)

Butler, G.W.; Giesler, G.C.; Liu, L.C.; Dropesky, B.J.; Knight, J.D.; Lucero, F.; Orth, C.J.

1981-05-01

This report contains the proceedings of the LAMPF Intermediate-Energy Nuclear Chemistry Workshop held in Los Alamos, New Mexico, June 23-27, 1980. The first two days of the Workshop were devoted to invited review talks highlighting current experimental and theoretical research activities in intermediate-energy nuclear chemistry and physics. Working panels representing major topic areas carried out indepth appraisals of present research and formulated recommendations for future research directions. The major topic areas were Pion-Nucleus Reactions, Nucleon-Nucleus Reactions and Nuclei Far from Stability, Mesonic Atoms, Exotic Interactions, New Theoretical Approaches, and New Experimental Techniques and New Nuclear Chemistry Facilities

Intermediate-energy nuclear chemistry workshop

Energy Technology Data Exchange (ETDEWEB)

Butler, G.W.; Giesler, G.C.; Liu, L.C.; Dropesky, B.J.; Knight, J.D.; Lucero, F.; Orth, C.J.

1981-05-01

This report contains the proceedings of the LAMPF Intermediate-Energy Nuclear Chemistry Workshop held in Los Alamos, New Mexico, June 23-27, 1980. The first two days of the Workshop were devoted to invited review talks highlighting current experimental and theoretical research activities in intermediate-energy nuclear chemistry and physics. Working panels representing major topic areas carried out indepth appraisals of present research and formulated recommendations for future research directions. The major topic areas were Pion-Nucleus Reactions, Nucleon-Nucleus Reactions and Nuclei Far from Stability, Mesonic Atoms, Exotic Interactions, New Theoretical Approaches, and New Experimental Techniques and New Nuclear Chemistry Facilities.

1993 Radiation Protection Workshop: Proceedings

International Nuclear Information System (INIS)

1993-01-01

The 1993 DOE Radiation Protection Workshop was conducted from April 13 through 15, 1993 in Las Vegas, Nevada. Over 400 Department of Energy Headquarters and Field personnel and contractors from the DOE radiological protection community attended the Workshop. Forty-nine papers were presented in eleven separate sessions: Radiological Control Manual Implementation, New Approaches to Instrumentation and Calibration, Radiological Training Programs and Initiatives, External Dosimetry, Internal Dosimetry, Radiation Exposure Reporting and Recordkeeping, Air Sampling and Monitoring Issues, Decontamination and Decommissioning of Sites, Contamination Monitoring and Control, ALARA/Radiological Engineering, and Current and Future Health Physics Research. Individual papers are indexed separately on the database

US-Japan workshop on field-reversed configurations with steady-state high-temperature fusion plasmas and the 11th US-Japan workshop on compact toroids

International Nuclear Information System (INIS)

Barnes, D.C.; Fernandez, J.C.; Rej, D.J.

1990-05-01

The US-Japan Workshop on Field-Reversed Configurations with Steady-State High-Temperature Fusion Plasma and the 11th US-Japan Workshop on Compact Toroids were held at Los Alamos National Laboratory, Los Alamos, New Mexico on November 7--9, 1989. These proceedings contain the papers presented at the workshops as submitted by the authors. These papers have been indexed separately

US-Japan workshop on field-reversed configurations with steady-state high-temperature fusion plasmas and the 11th US-Japan workshop on compact toroids

Energy Technology Data Exchange (ETDEWEB)

Barnes, D.C.; Fernandez, J.C.; Rej, D.J. (comps.)

1990-05-01

The US-Japan Workshop on Field-Reversed Configurations with Steady-State High-Temperature Fusion Plasma and the 11th US-Japan Workshop on Compact Toroids were held at Los Alamos National Laboratory, Los Alamos, New Mexico on November 7--9, 1989. These proceedings contain the papers presented at the workshops as submitted by the authors. These papers have been indexed separately.

Proceedings of the 13. International Workshop on Inspection Practices. 13. International Nuclear Regulatory Inspection Workshop, 17-21 April 2016, Bruges, Belgium

International Nuclear Information System (INIS)

Bens, Jan; De Boeck, Benoit; Wertelaers, An; Van Haesendonck, Michel; Barras, Pierre; Leblanc, Alexandre; Regan, Christopher; Smith, Paul; Kupila, Jukka; Crespo, Julio; Meskens, Gaston; Schneider, Matthias

2017-01-01

The main purpose of the workshop was to provide a forum for information exchange on the regulatory inspection activities. Participants had the opportunity to meet with their counterparts from other countries and organisations to discuss current and future issues on the selected topics. They developed conclusions regarding these issues and identified methods that may help to improve their own inspection programmes. The CNRA believes that an essential factor in ensuring the safety of nuclear installations is the continuing exchange and analysis of technical information and data. To facilitate this exchange the Committee has established working groups and groups of experts in specialised topics. The Working Group on Inspection Practices (WGIP) was formed in 1990 with the mandate '...to concentrate on the conduct of inspections and how the effectiveness of inspections could be evaluated..'. The WGIP facilitates the exchange of information and experience related to regulatory safety inspections between CNRA member countries. These proceedings cover the 13. International Nuclear Regulatory Inspection Workshop held by WGIP on regulatory inspection activities. This workshop, which is the 13. in a series, along with many other activities performed by the working group, is directed towards this goal. The consensus from participants at previous workshops noted that the value of meeting with people from other inspection organisations was one of the most important achievements. The focus of this workshop was on experience gained from regulatory inspection activities in three areas: - experience from the inspection activities during the transition from an operating reactor to a de-fueled status with a commitment to permanently cease power operations; - inspection of modifications; - the inspectors' role in the enforcement process. As part of the registration, participants were asked to respond to a questionnaire describing practices within their own countries on these topics

Transportation Management Workshop: Proceedings

International Nuclear Information System (INIS)

1993-01-01

This report is a compilation of discussions presented at the Transportation Management Workshop held in Gaithersburg, Maryland. Topics include waste packaging, personnel training, robotics, transportation routing, certification, containers, and waste classification

Transportation Management Workshop: Proceedings

Energy Technology Data Exchange (ETDEWEB)

1993-10-01

This report is a compilation of discussions presented at the Transportation Management Workshop held in Gaithersburg, Maryland. Topics include waste packaging, personnel training, robotics, transportation routing, certification, containers, and waste classification.

Participatory Design of Websites with Web Design Workshops

Directory of Open Access Journals (Sweden)

Alison Bersani

2008-03-01

Full Text Available At the University of Rochester's River Campus Libraries we have included users in technology development with great success. "Participatory design" entails collaboration among designers, developers, and users from the earliest stages of conception through to implementation of websites and other technology. Using participatory methods, a project to redesign the library website began with workshops to identify user needs and preferences. The results of these workshops led to the identification of key tasks for the main page. They also generated a hierarchy of tasks for sub-pages and rich information about how students and faculty members use current websites in their work. In our article, we explain our reasons for running participatory design workshops, describe our methods, review participants and recruitment, and summarize key findings. We also include information about our local implementation and general conclusions about the value of design workshops for website design and development.

Train shunting at a workshop area

DEFF Research Database (Denmark)

Jacobsen, Per Munk; Pisinger, David

2011-01-01

We consider the problem of planning the shunting of train units at a railway workshop area. Before and after the maintenance check, a train unit is parked at a depository track. The problem is to schedule the trains to workshops and depot tracks in order to complete the repairs as soon as possibl....... It turns out, that both GLS and SA find within a few minutes solutions that are a few percent from the best MIP solution found....

Alpha-emitters for medical therapy workshop

International Nuclear Information System (INIS)

Feinendegen, L.E.; McClure, J.J.

1996-01-01

A workshop on ''Alpha-Emitters for Medical Therapy'' was held May 30-31, 1996 in Denver Colorado to identify research goals and potential clinical needs for applying alpha-particle emitters and to provide DOE with sufficient information for future planning. The workshop was attended by 36 participants representing radiooncology, nuclear medicine, immunotherapy, radiobiology, molecular biology, biochemistry, radiopharmaceutical chemistry, dosimetry, and physics. This report provides a summary of the key points and recommendations arrived at during the conference

Alpha-emitters for medical therapy workshop

Energy Technology Data Exchange (ETDEWEB)

Feinendegen, L.E.; McClure, J.J.

1996-12-31

A workshop on ``Alpha-Emitters for Medical Therapy`` was held May 30-31, 1996 in Denver Colorado to identify research goals and potential clinical needs for applying alpha-particle emitters and to provide DOE with sufficient information for future planning. The workshop was attended by 36 participants representing radiooncology, nuclear medicine, immunotherapy, radiobiology, molecular biology, biochemistry, radiopharmaceutical chemistry, dosimetry, and physics. This report provides a summary of the key points and recommendations arrived at during the conference.

Cognitive aspects in games workshops for learning a foreign language

Directory of Open Access Journals (Sweden)

Claudia Ferrareto Lopes

2014-08-01

Full Text Available The goal of the study was to analyze the cognitive aspects related to learning English as a foreign language, by means of games workshops with students of the 6th grade of elementary school from a state school in Londrina. The paper is grounded on Piagetian theory and is descriptive-interpretative study with a qualitative perspective. Two guiding questions motivate the study: what is the role of games workshops for learning English as a foreign language? In what way the cognitive processes are held in the games workshops for learning English? To meet the proposed goals, workshops were implemented with games containing the linguistic contents studied in English classes. The games workshops enabled the observation and analysis of the cognitive aspects involved in learning a foreign language. Results show that the games workshops promote the participation of the students motivating action and output, evidencing gaps on the knowledge and providing equilibration processes. Subjects are asked to produce outputs via games demands, thus evoking knowhow, as well as the thinking about their own products, suggesting a conscious-awareness process.

Proceedings of the Fifth International Workshop on Targetry and Target Chemistry

International Nuclear Information System (INIS)

Dahl, J.R.; Ferrieri, R.; Finn, R.; Schlyer, D.J.

1994-01-01

The goal of the International Workshop on Targetry and Target Chemistry series has always been to provide an open forum for discussion of medical radionuclide production, primarily with particle accelerators. The format is intended to encourage the participants to set the direction of the ensuing discussion, allowing the participants to focus on areas of greatest immediate interest. The preceding workshops have set this tone and this workshop was designed to continue in this spirit. The topics of each session were selected by the local organizing committee after discussion with many of the attendees of the previous workshops. The formality of the workshops has gradually increased from the first rather small, very informal gathering in Heidelburg to the larger contingent present in Villigen, but the open discussion of topics of preoccupation has been maintained. Each Workshop has had areas of particular fascination. In the Fifth workshop the major focus was on the development of new accelerators and on the production of ammonia. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database

Proceedings of the Fifth International Workshop on Targetry and Target Chemistry

Energy Technology Data Exchange (ETDEWEB)

Dahl, J.R.; Ferrieri, R.; Finn, R.; Schlyer, D.J. [eds.

1994-12-31

The goal of the International Workshop on Targetry and Target Chemistry series has always been to provide an open forum for discussion of medical radionuclide production, primarily with particle accelerators. The format is intended to encourage the participants to set the direction of the ensuing discussion, allowing the participants to focus on areas of greatest immediate interest. The preceding workshops have set this tone and this workshop was designed to continue in this spirit. The topics of each session were selected by the local organizing committee after discussion with many of the attendees of the previous workshops. The formality of the workshops has gradually increased from the first rather small, very informal gathering in Heidelburg to the larger contingent present in Villigen, but the open discussion of topics of preoccupation has been maintained. Each Workshop has had areas of particular fascination. In the Fifth workshop the major focus was on the development of new accelerators and on the production of ammonia. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

International workshop on cold neutron sources

Energy Technology Data Exchange (ETDEWEB)

Russell, G.J.; West, C.D. (comps.) (Los Alamos National Lab., NM (United States))

1991-08-01

The first meeting devoted to cold neutron sources was held at the Los Alamos National Laboratory on March 5--8, 1990. Cosponsored by Los Alamos and Oak Ridge National Laboratories, the meeting was organized as an International Workshop on Cold Neutron Sources and brought together experts in the field of cold-neutron-source design for reactors and spallation sources. Eighty-four people from seven countries attended. Because the meeting was the first of its kind in over forty years, much time was spent acquainting participants with past and planned activities at reactor and spallation facilities worldwide. As a result, the meeting had more of a conference flavor than one of a workshop. The general topics covered at the workshop included: Criteria for cold source design; neutronic predictions and performance; energy deposition and removal; engineering design, fabrication, and operation; material properties; radiation damage; instrumentation; safety; existing cold sources; and future cold sources.

International workshop on cold neutron sources

International Nuclear Information System (INIS)

Russell, G.J.; West, C.D.

1991-08-01

The first meeting devoted to cold neutron sources was held at the Los Alamos National Laboratory on March 5--8, 1990. Cosponsored by Los Alamos and Oak Ridge National Laboratories, the meeting was organized as an International Workshop on Cold Neutron Sources and brought together experts in the field of cold-neutron-source design for reactors and spallation sources. Eighty-four people from seven countries attended. Because the meeting was the first of its kind in over forty years, much time was spent acquainting participants with past and planned activities at reactor and spallation facilities worldwide. As a result, the meeting had more of a conference flavor than one of a workshop. The general topics covered at the workshop included: Criteria for cold source design; neutronic predictions and performance; energy deposition and removal; engineering design, fabrication, and operation; material properties; radiation damage; instrumentation; safety; existing cold sources; and future cold sources

First Django Girls workshop in Geneva

CERN Multimedia

Julliard, Laure

2016-01-01

A Django girls workshop organised by the R0SEH1PSters community from Geneva and supported by the CERN diversity team and the IT department took place at IdeaSquare on 26th and 27th February. Django Girls is a volunteer-run organisation with hundreds of people contributing to bring more women without prior IT backgrounds to the Python and Django community. Python is a widely used general-purpose and dynamic programming language while Django is a high-level Python Web framework that makes it easier to build better Web apps more quickly and with less code. Over 155 free workshops in 125 cities and 57 countries have been organised worldwide regularly since 2014. The aim of the workshop was to introduce participants to the world of computer programming and technology by teaching them how to successfully create a blog application and deploy it to the internet.

Workshop on technology development issues for the large deployable reflector (LDR)

International Nuclear Information System (INIS)

Nishioka, K.

1986-02-01

The results of the 2nd Large Deployable Reflector (LDR) Technology Review Workshop held at Asilomar, California, March 17 to 22, 1985, are summarized. The workshop was convened to update LDR Technology status and to revise as necessary the results for the first LDR Workshop held in June 1982. There were some 100 participants representing government agencies, industry, and universities. This Workshop's goal was to assess, identify, and set priorities for the LDR technology issues based on requirements identified in the first workshop. Four high-priority technology areas were identified: (1) mirror materials and construction; (2) sensing and controls; (3) system-simulation and modeling capability; and (4) submillimeter instruments. The results of the workshop were used to provide a list of technolgy issues for the development of a technology initiatives plan for the LDR by NASA's Office of Aeronautics and Space Technology

Workshop on Technology Development Issues for the Large Deployable Reflector (LDR)

Science.gov (United States)

Nishioka, Kenji (Editor)

1986-01-01

The results of the 2nd Large Deployable Reflector (LDR) Technology Review Workshop held at Asilomar, California, March 17 to 22, 1985, are summarized. The workshop was convened to update LDR Technology status and to revise as necessary the results for the first LDR Workshop held in June 1982. There were some 100 participants representing government agencies, industry, and universities. This Workshop's goal was to assess, identify, and set priorities for the LDR technology issues based on requirements identified in the first workshop. Four high-priority technology areas were identified: (1) mirror materials and construction; (2) sensing and controls; (3) system-simulation and modeling capability; and (4) submillimeter instruments. The results of the workshop were used to provide a list of technolgy issues for the development of a technology initiatives plan for the LDR by NASA's Office of Aeronautics and Space Technology.

DoD Workshop on Southeast Regional Planning and Sustainability

National Research Council Canada - National Science Library

Berke, Philip; Brown, Robert; Elliott, Michael; Friday, Paul; Holst, Robert; Weiss, Jonathan; Wilkens, R. N

2007-01-01

These proceedings encompass outcomes from the DoD Southeast Regional Planning and Sustainability Workshop, which took place in April 2007, and reflect the opinions and views of workshop participants...

Low-level waste workshops. Final report

International Nuclear Information System (INIS)

1983-01-01

The Low-Level Radioactive Waste Policy Act of 1980 specifies that each state is responsible for the disposal of the low-level waste which is generated within its boundaries. The Act states that such wastes can be most safely and efficiently managed on a regional basis through compacts. It also defines low-level waste as waste which is not classified as high-level radioactive waste, transuranic waste, spent nuclear fuel, or by-product material as defined in the Atomic Energy Act of 1954. The Policy Act also stipulates that regional agreements or compacts shall not be applicable to the transportation, management, or disposal of low-level radioactive waste from atomic energy defense activities or federal research and development activities. It also specifies that agreements or compacts shall take affect on January 1, 1986, upon Congressional approval. In February 1983, the US Department of Energy awarded a grant to the Council of State Governments' Midwestern Office. The grant was to be used to fund workshops for legislation on low-level radioactive waste issues. The purpose of the workshops was to provide discussion specifically on the Midwest Interstate Compact on Low-Level Radioactive Waste. Legislators from the states which were eligible to join the compact were invited: Delaware, Illinois, Indiana, Iowa, Kentucky, Maryland, Michigan, Minnesota, Missouri, North Dakota, Ohio, South Dakota and Wisconsin. Virginia, Kansas and Nebraska were also eligible but had joined other compacts. Consequently, they weren't invited to the workshops. The Governor's office of West Virginia expressed interest in the compact, and its legislators were invited to attend a workshop. Two workshops were held in March. This report is a summary of the proceedings which details the concerns of the compact and expresses the reasoning behind supporting or not supporting the compact

Summary of the CSRI Workshop on Combinatorial Algebraic Topology (CAT): Software, Applications, & Algorithms

Energy Technology Data Exchange (ETDEWEB)

Bennett, Janine Camille [Sandia National Lab. (SNL-CA), Livermore, CA (United States). Visualization and Scientific Computing Dept.; Day, David Minot [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Applied Mathematics and Applications Dept.; Mitchell, Scott A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Computer Science and Informatics Dept.

2009-11-20

This report summarizes the Combinatorial Algebraic Topology: software, applications & algorithms workshop (CAT Workshop). The workshop was sponsored by the Computer Science Research Institute of Sandia National Laboratories. It was organized by CSRI staff members Scott Mitchell and Shawn Martin. It was held in Santa Fe, New Mexico, August 29-30. The CAT Workshop website has links to some of the talk slides and other information, http://www.cs.sandia.gov/CSRI/Workshops/2009/CAT/index.html. The purpose of the report is to summarize the discussions and recap the sessions. There is a special emphasis on technical areas that are ripe for further exploration, and the plans for follow-up amongst the workshop participants. The intended audiences are the workshop participants, other researchers in the area, and the workshop sponsors.

Workshop on scientific applications of coherent x-rays

Energy Technology Data Exchange (ETDEWEB)

Arthur, J.; Materlik, G.; Winick, H. [Stanford Univ., CA (United States). Stanford Linear Accelerator Center]|[Stanford Univ., CA (United States). Stanford Synchrotron Radiation Lab.; Birgeneau, R.J. [Massachusetts Institute of Technology, Cambridge, MA (United States); Fadley, C.S. [Lawrence Berkeley Lab., CA (United States). Materials Science Division

1994-02-12

This is a report on a workshop held at SLAC on February 12, 1994 to assess the science that would become possible using high peak power, short pulses of coherent radiation from a Free Electron Laser (FEL) operating in the hard x-ray region, at wavelengths down to about 1 {angstrom}. Sixty-three people participated in the workshop. The appendices to this report give a list of participants, the workshop agenda, and the charge to the workshop. Material describing the performance parameters of several possible sources was made available to the participants along with a graph showing the spectral distribution of the spontaneous as well as the coherent radiation and a note on peak power issues. This material is also included as an appendix to this report. This report consists of an Executive Summary, brief summaries by the speaker for each of the talks that were given, and copies of some of the viewgraphs that were shown. Also included are important points raised in the discussions that followed each talk. In addition, two contributions from scientists who could not attend the workshop are included, plus one contribution received from a participant after the workshop. A serious storm on the East coast made it impossible for three speakers and several intended participants to reach Stanford. The talk by Janos Kirz was presented by Malcolm Howells using viewgraphs sent by FAX. The talks by Keith Nelson and Brian Stephenson were not given. We include summaries by them of the talks they would have given, plus copies of some of their viewgraphs, in this report.

Workshop on scientific applications of coherent x-rays

International Nuclear Information System (INIS)

Arthur, J.; Materlik, G.; Winick, H.; Fadley, C.S.

1994-01-01

This is a report on a workshop held at SLAC on February 12, 1994 to assess the science that would become possible using high peak power, short pulses of coherent radiation from a Free Electron Laser (FEL) operating in the hard x-ray region, at wavelengths down to about 1 angstrom. Sixty-three people participated in the workshop. The appendices to this report give a list of participants, the workshop agenda, and the charge to the workshop. Material describing the performance parameters of several possible sources was made available to the participants along with a graph showing the spectral distribution of the spontaneous as well as the coherent radiation and a note on peak power issues. This material is also included as an appendix to this report. This report consists of an Executive Summary, brief summaries by the speaker for each of the talks that were given, and copies of some of the viewgraphs that were shown. Also included are important points raised in the discussions that followed each talk. In addition, two contributions from scientists who could not attend the workshop are included, plus one contribution received from a participant after the workshop. A serious storm on the East coast made it impossible for three speakers and several intended participants to reach Stanford. The talk by Janos Kirz was presented by Malcolm Howells using viewgraphs sent by FAX. The talks by Keith Nelson and Brian Stephenson were not given. We include summaries by them of the talks they would have given, plus copies of some of their viewgraphs, in this report

GammaWorkshops Proceedings

International Nuclear Information System (INIS)

Ramebaeck, H.; Straelberg, E.; Klemola, S.; Nielsen, Sven P.; Palsson, S.E.

2012-01-01

Due to a sparse interaction during the last years between practioners in gamma ray spectrometry in the Nordic countries, a NKS activity was started in 2009. This GammaSem was focused on seminars relevant to gamma spectrometry. A follow up seminar was held in 2010. As an outcome of these activities it was suggested that the 2011 meeting should be focused on practical issues, e.g. different corrections needed in gamma spectrometric measurements. This three day's meeting, GammaWorkshops, was held in September at Risoe-DTU. Experts on different topics relevant for gamma spectrometric measurements were invited to the GammaWorkshops. The topics included efficiency transfer, true coincidence summing corrections, self-attenuation corrections, measurement of natural radionuclides (natural decay series), combined measurement uncertainty calculations, and detection limits. These topics covered both lectures and practical sessions. The practical sessions included demonstrations of tools for e.g. corrections and calculations of the above meantioned topics. (Author)

GammaWorkshops Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramebaeck, H. (ed.) (Swedish Defence Research Agency (Sweden)); Straalberg, E. (Institute for Energy Technology, Kjeller (Norway)); Klemola, S. (Radiation and Nuclear Safety Authority, STUK (Finland)); Nielsen, Sven P. (Technical Univ. of Denmark. Risoe National Lab. for Sustainable Energy, Roskilde (Denmark)); Palsson, S.E. (Icelandic Radiation Safety Authority (Iceland))

2012-01-15

Due to a sparse interaction during the last years between practioners in gamma ray spectrometry in the Nordic countries, a NKS activity was started in 2009. This GammaSem was focused on seminars relevant to gamma spectrometry. A follow up seminar was held in 2010. As an outcome of these activities it was suggested that the 2011 meeting should be focused on practical issues, e.g. different corrections needed in gamma spectrometric measurements. This three day's meeting, GammaWorkshops, was held in September at Risoe-DTU. Experts on different topics relevant for gamma spectrometric measurements were invited to the GammaWorkshops. The topics included efficiency transfer, true coincidence summing corrections, self-attenuation corrections, measurement of natural radionuclides (natural decay series), combined measurement uncertainty calculations, and detection limits. These topics covered both lectures and practical sessions. The practical sessions included demonstrations of tools for e.g. corrections and calculations of the above meantioned topics. (Author)

Workshop on decommissioning

International Nuclear Information System (INIS)

Broden, K.

2005-12-01

A Nordic workshop on decommissioning of nuclear facilities was held at Risoe in Denmark September 13-15, 2005. The workshop was arranged by NKS in cooperation with the company Danish Decommissioning, DD, responsible for decommissioning of nuclear facilities at Risoe. Oral presentations were made within the following areas: International and national recommendations and requirements concerning decommissioning of nuclear facilities Authority experiences of decommissioning cases Decommissioning of nuclear facilities in Denmark Decommissioning of nuclear facilities in Sweden Plans for decommissioning of nuclear facilities in Norway Plans for decommissioning of nuclear facilities in Finland Decommissioning of nuclear facilities in German and the UK Decommissioning of nuclear facilities in the former Soviet Union Results from research and development A list with proposals for future work within NKS has been prepared based on results from group-work and discussions. The list contains strategic, economical and political issues, technical issues and issues regarding competence and communication. (au)

Appalachian Stream Mitigation Workshop

Science.gov (United States)

A 5 day workshop in 2011 developed for state and federal regulatory and resource agencies, who review, comment on and/or approve compensatory mitigation plans for surface coal mining projects in Appalachia

77 FR 46096 - Statistical Process Controls for Blood Establishments; Public Workshop

Science.gov (United States)

2012-08-02

...] Statistical Process Controls for Blood Establishments; Public Workshop AGENCY: Food and Drug Administration... workshop entitled: ``Statistical Process Controls for Blood Establishments.'' The purpose of this public workshop is to discuss the implementation of statistical process controls to validate and monitor...

75 FR 4062 - Peer Review Best Practices Workshop

Science.gov (United States)

2010-01-26

... DEPARTMENT OF ENERGY Peer Review Best Practices Workshop AGENCY: Department of Energy, Office of..., demonstration and deployment programs and has used a variety of peer review approaches to select the best...'' for reviewing and selecting project proposals. The workshop will explore classic peer review processes...