WorldWideScience

Sample records for ieps determined differences

  1. Perceptions of self-determination by special education and rehabilitation practitioners based on viewing a self-directed IEP versus an external-directed IEP meeting.

    Science.gov (United States)

    Branding, Dave; Bates, Paul; Miner, Craig

    2009-01-01

    This study investigated perception of self-determination by special education and rehabilitation practitioners following their exposure to a videotaped simulation of a self-directed IEP meeting and an external-directed IEP meeting involving an adolescent with mild mental retardation. Groups of special education practitioners and rehabilitation practitioners did not differ from each other in their perceptions of self-determination before or after viewing either the self-directed or external-directed IEP meeting simulation. However, both groups of respondents had higher perceptions of the self-determination capability of the confederate student when they viewed her in a self-directed meeting. In addition, respondents consistently rated the self-directed meeting simulation as being of higher overall quality than the external-directed meeting. Results are discussed in relation to practitioner recommendations and future research in regard to the development and enabling of self-determination skills involving persons with disabilities.

  2. Perceptions of Self-Determination by Special Education and Rehabilitation Practitioners Based on Viewing a Self-Directed IEP versus an External-Directed IEP Meeting

    Science.gov (United States)

    Branding, Dave; Bates, Paul; Miner, Craig

    2009-01-01

    This study investigated perception of self-determination by special education and rehabilitation practitioners following their exposure to a videotaped simulation of a self-directed IEP meeting and an external-directed IEP meeting involving an adolescent with mild mental retardation. Groups of special education practitioners and rehabilitation…

  3. Are We Practicing What We Are Preaching? An Evaluation of Self-Determination Instructional Components in IEPs at a Midwestern High School

    Science.gov (United States)

    Lopez, Nancy; Stoner, Julia B.

    2017-01-01

    Promoting self-determination in students with disabilities is recognized as an integral component of education today. For most students with disabilities, self-determination should be addressed through instruction and in the Individualized Education Program (IEP). Yet, IEPs are rarely evaluated to determine if goals targeting self-determination…

  4. Examining the Quality of IEPs for Young Children with Autism

    OpenAIRE

    Ruble, Lisa A.; McGrew, John; Dalrymple, Nancy; Jung, Lee Ann

    2010-01-01

    The purpose of this study was to develop an Individual Education Program (IEP) evaluation tool based on Individuals with Disabilities Education Act (IDEA) requirements and National Research Council recommendations for children with autism; determine the tool’s reliability; test the tool on a pilot sample of IEPs of young children; and examine associations between IEP quality and school, teacher, and child characteristics. IEPs for 35 students with autism (Mage = 6.1 years; SD = 1.6) from 35 d...

  5. Student and Parent IEP Collaboration: A Comparison across School Settings

    Science.gov (United States)

    Williams-Diehm, Kendra L.; Brandes, Joyce A.; Chesnut, Pik Wah; Haring, Kathryn A.

    2014-01-01

    The purpose of this study was to determine if differences existed across rural, urban, and suburban environments when special education teachers reported perceived levels of student and parent involvement and participation during IEP meetings. The investigators surveyed special education teachers (N = 159) across a Southwest state and applied log…

  6. Red de iep

    NARCIS (Netherlands)

    Hiemstra, J.A.; Kopinga, J.; Buiteveld, J.

    2007-01-01

    Het gebruik van de iep - ook resistente iepen - is in de afgelopen decennia dan ook sterk afgenomen. Hierdoor verdwijnt de iep steeds meer uit het Nederlandse landschap. De onvrede van groenbeheerders en boomkwekers leidde in de afgelopen jaren tot een aantal discussiebijeenkomsten over de toekomst

  7. Promoting IEP Participation: Effects of Interventions, Considerations for CLD Students

    Science.gov (United States)

    Griffin, Megan M.

    2011-01-01

    Various interventions have been developed to promote student individualized education program (IEP) participation. Although they are generally endorsed by educators and researchers, critics argue that interventions to promote self-determination and IEP participation may be counter to the values of culturally and linguistically diverse (CLD)…

  8. Examining the Quality of IEPs for Young Children with Autism

    Science.gov (United States)

    Ruble, Lisa A.; McGrew, John; Dalrymple, Nancy; Jung, Lee Ann

    2010-01-01

    The purpose of this study was to develop an Individual Education Program (IEP) evaluation tool based on Individuals with Disabilities Education Act (IDEA) requirements and National Research Council recommendations for children with autism; determine the tool's reliability; test the tool on a pilot sample of IEPs of young children; and examine…

  9. Resistentie geeft Iep weer toekomst

    NARCIS (Netherlands)

    Hiemstra, J.A.

    2013-01-01

    De iep was lang één van de meest gekweekte boomsoorten in Nederland, totdat deze door problemen met de iepziekte bij veel afnemers een slechte naam kreeg. Onderzoek door PPO en Alterra laat nu echter zien dat de iep weer volop toekomst heeft. De nieuwe rassen die inmiddels op de markt zijn, hebben

  10. Desarrollando el IEP de su Hijo. Guia para Padres (Developing Your Child's IEP. A Parent's Guide).

    Science.gov (United States)

    Rebhorn, Theresa

    This Spanish language guide for parents of children with disabilities explains the basics of the special education process, especially parent participation developing the child's individualized education program (IEP). The first section reviews the IEP process, including what's involved, the IEP meeting, who attends the IEP meeting, the role of…

  11. 34 CFR 300.321 - IEP Team.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false IEP Team. 300.321 Section 300.321 Education Regulations... Placements Individualized Education Programs § 300.321 IEP Team. (a) General. The public agency must ensure that the IEP Team for each child with a disability includes— (1) The parents of the child; (2) Not less...

  12. De iep heeft weer toekomst

    NARCIS (Netherlands)

    Hiemstra, J.A.

    2013-01-01

    Door de iepziekte is de iep grotendeels uit het landschap verdwenen. Zonde, want het is voor veel moeilijke plekken de ideale boom. Onderzoek van PPO en Alterra laat nu echter zien dat er voldoende resistente iepen zijn om de boom weer volop te gaan gebruiken.

  13. Increasing Student Involvement in IEPs

    Science.gov (United States)

    Nolan-Spohn, Hannah

    2016-01-01

    In this article, the author proposes that students who led their Individual Education Program (IEP) meetings were better informed about their own disabilities, rights, and accommodations, and that the act of leading the meeting resulted in improved self-advocacy and self-confidence. Also, in understanding their list of accommodations and…

  14. The HAWK Highway: A Vertical Model for Student IEP Participation

    Science.gov (United States)

    Quann, Monica; Lyman, Jennifer; Crumlish, Jamie; Hines, Sally; Williams, Lynn; Pleet-Odle, Amy; Eisenman, Laura

    2015-01-01

    Special educators at an inclusive career-technical high school created a model to support annually increasing expectations for self-determination and levels of student participation in Individualized Education Program (IEP) planning and implementation. The grade-specific components of the model and supporting context are described. Students were…

  15. Transformational Leadership in Special Education: Leading the IEP Team

    Science.gov (United States)

    Lentz, Kirby

    2012-01-01

    Using the principles of transformational leadership, IEP teams become effective tools to ensure student success and achievements. There is a difference of teams that are simply chaired and those that are lead. Teams with transformational leaders promote the best efforts of all participants including parents and students to effectively deliver…

  16. Facilitated IEP Meetings. PHP-c90

    Science.gov (United States)

    PACER Center, 2004

    2004-01-01

    To help special education planning teams reach agreements, the Minnesota Department of Education and the Minnesota Special Education Mediation Service (MNSEMS) provide the option of facilitated IEP meetings. This option is available for IEP (Individualized Education Program), IIIP (Individual Interagency Intervention Plan), and IFSP (Individual…

  17. Six Tips for Successful IEP Meetings

    Science.gov (United States)

    Diliberto, Jennifer A.; Brewer, Denise

    2012-01-01

    Individuals with Disabilities Education Improvement Act (IDEIA, 2004) mandates that each student with a disability has an individualized education program (IEP). The IEP serves as the curriculum roadmap for special education services. In order to generate a clear roadmap, full team communication is necessary. The purpose of this paper is to…

  18. Weer volop toekomst voor de iep

    NARCIS (Netherlands)

    Hiemstra, J.A.

    2014-01-01

    De iep is eeuwenlang een van de beeldbepalende bomen geweest in het Nederlandse landschap en de Nederlandse steden. Door de opkomst van de iepziekte zijn in de loop van de vorige eeuw veel van deze Hollandse iepen verdwenen. Door de voortdurende problemen met de iepziekte kreeg de iep bij veel

  19. IEP Use by General and Special Education Teachers

    OpenAIRE

    Kathleen Rotter

    2014-01-01

    The role of general and special educators in implementing the Individualized Education Program (IEP) is critical. This study investigated the perceptions of those teachers on when they read the IEP, how they measure attainment of IEP goals and objectives, and the IEPs usefulness in instructional planning. Four hundred twenty-six teachers from suburban school districts in central New Jersey were respondents. Results ind...

  20. Individualized Education Plans (IEPs) (For Parents)

    Science.gov (United States)

    ... of specific school skills, such as reading or math, as well as more general developmental skills, such ... to update the goals and make sure the levels of service meet your child's needs. However, IEPs ...

  1. IEP goals for school-age children with speech sound disorders.

    Science.gov (United States)

    Farquharson, Kelly; Tambyraja, Sherine R; Justice, Laura M; Redle, Erin E

    2014-01-01

    The purpose of the current study was to describe the current state of practice for writing Individualized Education Program (IEP) goals for children with speech sound disorders (SSDs). IEP goals for 146 children receiving services for SSDs within public school systems across two states were coded for their dominant theoretical framework and overall quality. A dichotomous scheme was used for theoretical framework coding: cognitive-linguistic or sensory-motor. Goal quality was determined by examining 7 specific indicators outlined by an empirically tested rating tool. In total, 147 long-term and 490 short-term goals were coded. The results revealed no dominant theoretical framework for long-term goals, whereas short-term goals largely reflected a sensory-motor framework. In terms of quality, the majority of speech production goals were functional and generalizable in nature, but were not able to be easily targeted during common daily tasks or by other members of the IEP team. Short-term goals were consistently rated higher in quality domains when compared to long-term goals. The current state of practice for writing IEP goals for children with SSDs indicates that theoretical framework may be eclectic in nature and likely written to support the individual needs of children with speech sound disorders. Further investigation is warranted to determine the relations between goal quality and child outcomes. (1) Identify two predominant theoretical frameworks and discuss how they apply to IEP goal writing. (2) Discuss quality indicators as they relate to IEP goals for children with speech sound disorders. (3) Discuss the relationship between long-term goals level of quality and related theoretical frameworks. (4) Identify the areas in which business-as-usual IEP goals exhibit strong quality.

  2. [Randomized clinical trial of IEP and EP regimens in the treatment of patients with small cell lung cancer].

    Science.gov (United States)

    Zhou, Hui; Wang, Anlan; Huang, Zhihua; Zhou, Wenwei

    2004-06-20

    To observe and compare the efficacy and safety of IEP and EP regimens for small cell lung cancer (SCLC). Sixty-four patients with SCLC pathologically proved were randomly divided into IEP group ( n =32) and EP group ( n =32). All the 64 patients were evaluable for response and toxicity. In IEP group, the total responsive rate, responsive rates of limited-stage patients and extensive-stage patients were 84.4%(27/32), 100.0%(15/15) and 70.6%(12/17) respectively; while in EP group, those were 75.0%(24/32), 85.7%(12/14) and 66.7% (12/18) respectively. The median duration of remission was 6 months and 1-year survival rate was 62.5% in IEP group, and 5 months and 56.2% in EP group. There was no significant difference in response rate, median duration of remission and 1-year survival between the two groups ( P > 0.05). The main toxicity was myelosuppression. Incidences of leukopenia at grade III-IV, nausea, vomiting and alopecia were significantly higher in the IEP arm than those in the EP arm ( P IEP and EP. IEP regimen shows a similar response rate compared with EP regimen. They might be considered as relevant regimens in initial patients with small cell lung cancer.

  3. My IEP: A Student-Directed Individualized Education Program Model

    Science.gov (United States)

    Royer, David J.

    2017-01-01

    Students with disabilities need to be more involved in planning and presenting individualized education program (IEP) meetings, and teachers need an effective, efficient curriculum to teach students how. "My IEP" curriculum uses folding graphic organizers to teach students to self-direct IEP meetings, targeting self-advocacy and…

  4. 34 CFR 300.112 - Individualized education programs (IEP).

    Science.gov (United States)

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Individualized education programs (IEP). 300.112 Section 300.112 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF... education programs (IEP). The State must ensure that an IEP, or an IFSP that meets the requirements of...

  5. Attitudes of Special Education Teachers and School Psychologists toward Individualized Education Plan IEPs Developed Using Traditional Assessments versus IEPs Developed Using a Multiple Intelligence Assessment

    Science.gov (United States)

    Alhajri, Meshari A SH A.

    2011-01-01

    The purpose of this research was to determine the usefulness of Multiple Intelligence for educational planning for students in special education. More specifically, this study applied the Multiple Intelligences Developmental Assessment Scales (MIDAS) to a sample of students receiving special education services who had IEPs developed using…

  6. IEP Use by General and Special Education Teachers

    Directory of Open Access Journals (Sweden)

    Kathleen Rotter

    2014-04-01

    Full Text Available The role of general and special educators in implementing the Individualized Education Program (IEP is critical. This study investigated the perceptions of those teachers on when they read the IEP, how they measure attainment of IEP goals and objectives, and the IEPs usefulness in instructional planning. Four hundred twenty-six teachers from suburban school districts in central New Jersey were respondents. Results indicated that the majority of general and special education teachers are reading their students’ IEPs in a fairly timely manner and that they find them moderately useful in planning instruction. Results also suggested that teachers relied heavily on grades to document attainment of IEP goals and that teachers felt that the IEPs themselves could be improved if they were shorter with student-specific, critical information that was more relevant to classroom instruction.

  7. Music in the IEP: Therapy/Education.

    Science.gov (United States)

    Alley, Jayne M.

    1979-01-01

    The article discusses the roles of music education and music therapy in special education, specifically with reference to the concept of the individualized education program (IEP) as mandated by the Education for All Handicapped Children Act (P.L. 94-142). Journal availability: National Association for Music Therapy, Inc., P.O. Box 610, Lawrence,…

  8. De iep is weer te vertrouwen

    NARCIS (Netherlands)

    Hiemstra, J.A.; Beintema, N.

    2012-01-01

    De iep is door de iepziekte grotendeels uit Europa verdwenen. Mede dankzij Wagenings onderzoek zijn er nu resistente rassen op de markt. Wat nog ontbreekt is het vertrouwen van beheerders om de karakteristieke boom weer aan te planten. ‘Iepen waren synoniem met ellende.’

  9. IEP Documentation for Effective Systematic Facilitation

    Science.gov (United States)

    Eng, Peng-Sim

    2015-01-01

    This paper discusses how the process for IEP documentation was used in a training program for a group of young inexperienced teachers and teaching aides to effectively address the educational needs of children with diverse disabilities. Teachers at Kianh Centre in Vietnam received explicit instructions for writing effective functional individual…

  10. IEP Meetings: Building Compassion and Conversation

    Science.gov (United States)

    Fialka, Janice; Fialka-Feldman, Emma

    2017-01-01

    Why are IEP meetings often uncomfortable, awkward, and stiff? Educators and families all have a common goal--to support the growth of a child. Yet educators often feel confused that families act like reluctant participants who are just fulfilling a requirement. And families often feel that they're viewed as intruders, whose insights and dreams for…

  11. 34 CFR 300.323 - When IEPs must be in effect.

    Science.gov (United States)

    2010-07-01

    ... disability within its jurisdiction, an IEP, as defined in § 300.320. (b) IEP or IFSP for children aged three...), the IEP Team must consider an IFSP that contains the IFSP content (including the natural environments... accordance with the IEP procedures under this part. The IFSP may serve as the IEP of the child, if using the...

  12. "Doug C. v. Hawaii Department of Education": Parental Participation in IEP Development

    Science.gov (United States)

    Yell, Mitchell L.; Katsiyannis, Antonis; Losinski, Mickey

    2015-01-01

    Parental participation is a crucial component of the Individuals with Disabilities Education Act. When developing students' Individualized Education Programs (IEPs), school-based teams must place a high priority on involving students' parents in a collaborative effort to develop their children's educational programs and determine their placements.…

  13. Opinions of Prospective Classroom Teachers about Their Competence for Individualized Education Program (IEP)

    Science.gov (United States)

    Debbag, Murat

    2017-01-01

    This research aims to determine the opinions of prospective classroom teachers about preparation and implementation of Individualized Education Program (IEP). In this study, a qualitative research method was used. The participants were 20 classroom-teaching students that had been selected through the purposive sampling method. In the study, the…

  14. The surface chemistry of sapphire-c: A literature review and a study on various factors influencing its IEP.

    Science.gov (United States)

    Lützenkirchen, J; Franks, G V; Plaschke, M; Zimmermann, R; Heberling, F; Abdelmonem, A; Darbha, G K; Schild, D; Filby, A; Eng, P; Catalano, J G; Rosenqvist, J; Preocanin, T; Aytug, T; Zhang, D; Gan, Y; Braunschweig, B

    2018-01-01

    A wide range of isoelectric points (IEPs) has been reported in the literature for sapphire-c (α-alumina), also referred to as basal plane, (001) or (0001), single crystals. Interestingly, the available data suggest that the variation of IEPs is comparable to the range of IEPs encountered for particles, although single crystals should be much better defined in terms of surface structure. One explanation for the range of IEPs might be the obvious danger of contaminating the small surface areas of single crystal samples while exposing them to comparatively large solution reservoirs. Literature suggests that factors like origin of the sample, sample treatment or the method of investigation all have an influence on the surfaces and it is difficult to clearly separate the respective, individual effects. In the present study, we investigate cause-effect relationships to better understand the individual effects. The reference IEP of our samples is between 4 and 4.5. High temperature treatment tends to decrease the IEP of sapphire-c as does UV treatment. Increasing the initial miscut (i.e. the divergence from the expected orientation of the crystal) tends to increase the IEP as does plasma cleaning, which can be understood assuming that the surfaces have become less hydrophobic due to the presence of more and/or larger steps with increasing miscut or due to amorphisation of the surface caused by plasma cleaning. Pre-treatment at very high pH caused an increase in the IEP. Surface treatments that led to IEPs different from the stable value of reference samples typically resulted in surfaces that were strongly affected by subsequent exposure to water. The streaming potential data appear to relax to the reference sample behavior after a period of time of water exposure. Combination of the zeta-potential measurements with AFM investigations support the idea that atomically smooth surfaces exhibit lower IEPs, while rougher surfaces (roughness on the order of nanometers) result

  15. Improvement of radiological penumbra using intermediate energy photons (IEP) for stereotactic radiosurgery

    International Nuclear Information System (INIS)

    O'Malley, Lauren; Pignol, Jean-Philippe; Beachey, David J; Keller, Brian M; Presutti, Joseph; Sharpe, Michael

    2006-01-01

    Using efficient immobilization and dedicated beam collimation devices, stereotactic radiosurgery ensures highly conformal treatment of small tumours with limited microscopic extension. One contribution to normal tissue irradiation remains the radiological penumbra. This work aims at demonstrating that intermediate energy photons (IEP), above orthovoltage but below megavoltage, improve dose distribution for stereotactic radiosurgery for small irradiation field sizes due to a dramatic reduction of radiological penumbra. Two different simulation systems were used: (i) Monte Carlo simulation to investigate the dose distribution of monoenergetic IEP between 100 keV and 1 MeV in water phantom; (ii) the Pinnacle 3 TPS including a virtual IEP unit to investigate the dosimetry benefit of treating with 11 non-coplanar beams a 2 cm tumour in the middle of a brain adjacent to a 1 mm critical structure. Radiological penumbrae below 300 μm are generated for field size below 2 x 2 cm 2 using monoenergetic IEP beams between 200 and 400 keV. An 800 kV beam generated in a 0.5 mm tungsten target maximizes the photon intensity in this range. Pinnacle 3 confirms the dramatic reduction in penumbra size. DVHs show for a constant dose distribution conformality, improved dose distribution homogeneity and better sparing of critical structures using a 800 kV beam compared to a 6 MV beam

  16. Improvement of radiological penumbra using intermediate energy photons (IEP) for stereotactic radiosurgery

    Science.gov (United States)

    O'Malley, Lauren; Pignol, Jean-Philippe; Beachey, David J.; Keller, Brian M.; Presutti, Joseph; Sharpe, Michael

    2006-05-01

    Using efficient immobilization and dedicated beam collimation devices, stereotactic radiosurgery ensures highly conformal treatment of small tumours with limited microscopic extension. One contribution to normal tissue irradiation remains the radiological penumbra. This work aims at demonstrating that intermediate energy photons (IEP), above orthovoltage but below megavoltage, improve dose distribution for stereotactic radiosurgery for small irradiation field sizes due to a dramatic reduction of radiological penumbra. Two different simulation systems were used: (i) Monte Carlo simulation to investigate the dose distribution of monoenergetic IEP between 100 keV and 1 MeV in water phantom; (ii) the Pinnacle3 TPS including a virtual IEP unit to investigate the dosimetry benefit of treating with 11 non-coplanar beams a 2 cm tumour in the middle of a brain adjacent to a 1 mm critical structure. Radiological penumbrae below 300 µm are generated for field size below 2 × 2 cm2 using monoenergetic IEP beams between 200 and 400 keV. An 800 kV beam generated in a 0.5 mm tungsten target maximizes the photon intensity in this range. Pinnacle3 confirms the dramatic reduction in penumbra size. DVHs show for a constant dose distribution conformality, improved dose distribution homogeneity and better sparing of critical structures using a 800 kV beam compared to a 6 MV beam.

  17. The Effectiveness of Alternative IEP Dispute Resolution Practices

    Science.gov (United States)

    Scanlon, David; Saenz, Lauren; Kelly, Michael P.

    2018-01-01

    Alternative Individualized Education Program (IEP) dispute resolution models should respond to limitations of current options. An experimental IEP dispute resolution program provides parents and schools with an evidence-supported neutral perspective on what is needed for free and appropriate education (FAPE) and least restrictive environment…

  18. Investigation of Health Care Components in Transition IEPs

    Science.gov (United States)

    Repetto, Jeanne B.; Jaress, Jennifer; Lindsey, Jenna; Bae, Jungah

    2016-01-01

    The purpose of this study was to assess the inclusion of health care components in transition Individualized Education Programs (IEPs) for students diagnosed with Other Health Impaired (OHI). In this study, we analyzed 50 IEPs of students with an OHI diagnosis to establish whether there are health-related components or other common health care…

  19. Back to the Basics: Practical Tips for IEP Writing

    Science.gov (United States)

    Patti, Angela L.

    2016-01-01

    The individualized education program (IEP) is the foundation for the provision of special education services for a child with a disability. While special education teachers learn about IEP writing in their teacher preparation programs, it can still be difficult to translate this knowledge into practice. Therefore, when faced with the task of…

  20. How Individualised Are the Individualised Education Programmes (IEPs): An Analysis of the Contents and Quality of the IEPs Goals

    Science.gov (United States)

    Sanches-Ferreira, Manuela; Lopes-dos-Santos, Pedro; Alves, Sílvia; Santos, Miguel; Silveira-Maia, Mónica

    2013-01-01

    The Individualised Education Programme (IEP) is a fundamental document that describes all educational responses to the additional support needs of students, setting up the guideline for their learning and developmental experiences. Specifically, the IEP goals represent the personal destination translated into desirable behaviours and skills that…

  1. Making MEPA-IEP work: tools for professionals.

    Science.gov (United States)

    McRoy, Ruth; Mica, Maryanne; Freundlich, Madelyn; Kroll, Joe

    2007-01-01

    The Multiethnic Placement Act of 1994 and the Interethnic Adoption Provisions of 1996 (MEPA-IEP) require states to develop plans that "provide for the diligent recruitment of potential foster and adoptive families that reflect the ethnic and racial diversity of children in the state for whom foster and adoptive homes are needed." This paper explores the background of MEPA-IEP, describes the disparate outcomes for minority children in the child welfare system, and identifies agency challenges in finding permanent families for African American children. Tools are provided for successfully recruiting families while following MEPA-IEP and avoiding potentially discriminatory practices in placement decisionmaking.

  2. In the Best Interests of the Child: Individualized Education Program (IEP) Meetings When Parents Are in Conflict

    Science.gov (United States)

    Feinberg, Edward; Moses, Philip; Engiles, Anita; Whitehorne, Amy; Peter, Marshall

    2014-01-01

    Individual Education Program (IEP) teams are composed of diverse individuals, each bringing a unique set of experiences, knowledge, and skills to the table. Given this, it is not uncommon for team members to have different views on the special education and related services needs of the student whose plan is being developed. When divergent views…

  3. Uranium determination in different compositions

    International Nuclear Information System (INIS)

    Bulyanitsa, L.S.; Ivanova, K.S.; Ryzhinskij, M.V.; Alekseeva, N.A.; Solntseva, L.F.; Shereshevskaya, I.I.

    1978-01-01

    For clarifying the suitability of two different methods of analysis for determining uranium without its previous purification, the analysis of uranium carbides (UC, UC 2 , UC - ZrC) and alloys (U - Al, U - Zr - Nb, U- Ti) has been carried out. Dissolution of the compositions examined was carried out either after previous calcining (UC, UC 2 ) or fusion with KHSO 4 (UC - ZrC), or in phosphoric acid (alloys). The first method, a variant of potentiometric titration, has been modified for small amounts of uranium. Titration was carried out on a semiautomatic titrating unit. The uranium amount per titration is about 4 to 5 mg. The second method of analysis is the coulombmetric titration at a constant current intensity. The quantity of uranium per titration was equal to 1 - 3 mg. The statistical processing of the results obtained was carried out by a dispersion analysis that allowed to reveal the influence of separate factors, such as method of analysis, type of composition, the non-uniformity of a sample, the enumerated factors influencing the dispersion of the analysis results. It has been shown that the both methods are equally suitable for analysis of the uranium compounds examined

  4. Individualized Education Program (IEP) Facilitation. A Guide for Parents of Children & Youth (Ages 3-21)

    Science.gov (United States)

    Center for Appropriate Dispute Resolution in Special Education (CADRE), 2014

    2014-01-01

    Individualized Education Program (IEP) Facilitation is an optional process, not required by the Individuals with Disabilities Education Act (IDEA), that state educational agencies (SEA) or school districts may provide to parents and schools. The goal of a Facilitated IEP meeting is to develop an IEP that is supported by team members and benefits…

  5. Beyond Legal: Crafting High-Quality IEPs for Children With Complex Communication Needs

    Science.gov (United States)

    Rowland, Charity Mary; Quinn, Emily Dayle; Steiner, Sandra A. M.

    2015-01-01

    The Individualized Education Program (IEP) is a legal document developed for each student with a disability. The IEP outlines the student's learning needs and associated educational goals, as well as the program placement and services required to support the attainment of these goals in the least restrictive environment. Most IEPs include all…

  6. Toekomst voor de iep : Resistentie, vermeerdering en gebruikswaarde van het huidige sortiment

    NARCIS (Netherlands)

    Hiemstra, J.A.; Buitenveld [sic], J.; Kopinga, J.

    2012-01-01

    De iep was aan het begin van de 20e eeuw de belangrijkste laanboomsoort in Nederland. Door de problemen met iepziekte nam het belang van de iep in de loop van de 20e eeuw sterk af. De iep is echter een ideale laan-en straatboom die in grote delen van Nederland niet gemist kan worden. Inmiddels zijn

  7. Tablet Technology to Monitor Physical Education IEP Goals and Benchmarks

    Science.gov (United States)

    Lavay, Barry; Sakai, Joyce; Ortiz, Cris; Roth, Kristi

    2015-01-01

    The Individual with Disabilities Education Act (IDEA) mandates that all children who are eligible for special education services receive an individualized education program (IEP). Adapted physical education (APE) professionals who teach physical education to children with disabilities are challenged with how to best collect and monitor student…

  8. Legal IEPs: A Common Sense Approach with Barbara Bateman. [Videotape].

    Science.gov (United States)

    Council for Exceptional Children, Reston, VA. Div. for Learning Disabilities.

    In this 2-hour videotape workshop designed for teachers, administrators, parents, and others, Dr. Barbara Bateman answers many key questions that have been raised about Individualized Education Programs (IEPs) since the 1997 amendments to the Individuals with Disabilities Education Act (IDEA) and the 1999 regulations. The videotape reviews the…

  9. Student IEP Participation and Academic Achievement across Time

    Science.gov (United States)

    Barnard-Brak, Lucy; Lechtenberger, DeAnn

    2010-01-01

    The Individuals with Disabilities Education Act mandates that students with disabilities be provided the necessary special education and related services that will allow them the benefit of a free and appropriate public education. Individualized Education Programs (IEPs) are the product of a team planning process that facilitates the coordination…

  10. Belang en toekomst van de iep in Nederland

    NARCIS (Netherlands)

    Hiemstra, J.A.; Buiteveld, J.; Kopinga, J.; Kranenborg, K.G.; Ravesloot, M.B.M.; Sluis, van der B.J.; Vries, de S.M.G.

    2006-01-01

    In dit rapport het resultaat van een door PPO Bomen en Alterra uitgevoerde orienterende studie in opdracht van het PT naar de rol, het belang en de toekomstmogelijkheden van de iep in Nederland. Hierbij aandacht voor de in Nederland inheemse iepensoorten en hun eigenschappen, de gebruikswaarde van

  11. Iep of Olm - Karakterboom van de Lage Landen -

    NARCIS (Netherlands)

    Heybroek, H.; Goudzwaard, L.; Kaljee, H.

    2009-01-01

    Iep of Olm – karakterboom van de Lage Landen vertelt het verhaal van deze karakteristieke bomen in het licht van 7500 jaar Nederlandse cultuurgeschiedenis. Het boek geeft een historisch overzicht van iepen in stad en landschap, vertelt over oeroude gebruiken en schetst de geschiedenis van een eeuw

  12. The Effects of Using the Transition Planning Inventory and a Structured IEP Process as a Transition Planning Intervention on IEP Meeting Outcomes

    Science.gov (United States)

    Rehfeldt, Jason D.; Clark, Gary M.; Lee, Steven W.

    2012-01-01

    This study examined two areas. First, the authors looked at whether secondary individualized education program (IEP) teams who used the "Transition Planning Inventory" (TPI) in conjunction with a structured IEP meeting that based discussions and decisions on TPI data as a planning intervention generated significantly more…

  13. Surface properties and dye loading behavior of Zn2SnO4 nanoparticles hydrothermally synthesized using different mineralizers

    International Nuclear Information System (INIS)

    Annamalai, Alagappan; Eo, Yang Dam; Im, Chan; Lee, Man-Jong

    2011-01-01

    We present for the first time the influence of different mineralizers on the isoelectric point (IEP) of zinc stannate (Zn 2 SnO 4 ) nanoparticles hydrothermally prepared using three different mineralizers, viz., Na 2 CO 3 , KOH and tert-butyl amine, and the effect of the IEPs on the dye loading behavior of Zn 2 SnO 4 based photoelectrodes in dye sensitized solar cells (DSSCs). To produce highly crystalline, uniform sized Zn 2 SnO 4 nanoparticles, hydrothermal processing parameters, such as reaction temperature, time, and the mineralizers used have been critically adjusted. The structural and morphological features of the as-synthesized Zn 2 SnO 4 nanoparticles have been observed using both scanning and transmission electron microscopy. For the surface state characterization of shape- and size-controlled Zn 2 SnO 4 nanoparticles, the IEPs of Zn 2 SnO 4 surfaces were determined through zeta potential measurements. The IEPs were found to be 5.7, 7.4 and 8.1 for Zn 2 SnO 4 nanoparticles formed using Na 2 CO 3 , KOH and tert-butyl amine, respectively, suggesting that the surface properties of Zn 2 SnO 4 nanoparticles can be manipulated through the choice of the mineralizers used during the hydrothermal reaction. The amount of N719 dye loading on the surfaces of Zn 2 SnO 4 electrodes having different IEPs was also evaluated. It was revealed that the higher the IEP, the higher the dye loading amount, which means that the IEP mainly affects the dye loading at the dye-metal oxide interface. - Highlights: → The effect of various mineralizers on the isoelectric point of Zn 2 SnO 4 was discussed. → The IEP of Zn 2 SnO 4 can be modified by the choice of mineralizer. → Change in IEP affects the surface properties and the morphology of Zn 2 SnO 4 particles. → Modified surface affects the N719 dye loading behaviour of the Zn 2 SnO 4 based DSSCs.

  14. Individualized Education Program (IEP Mata Pelajaran Kimia untuk Siswa Slow Learner

    Directory of Open Access Journals (Sweden)

    Rovik Rovik

    2017-06-01

    [Siswa slow learner menempati populasi tertinggi untuk siswa berkebutuhan khusus. Sebagai salah satu jenis learning disability, slow learner masih dapat belajar dengan teman sebayanya asalkan guru mempersiapkan program pembelajaran khusus yang telah dimodifikasi dari pembelajaran reguler. Program ini disebut Individualized Education Program (IEP. Penelitian ini mencoba mengembangkan IEP mata pelajaran kimia untuk slow learner, mengidentifikasi komponen yang dibutuhkan dalam menyusun IEP untuk slow learner, dan menganalisis judgement reviewers (guru kimia dan guru pendamping khusus dan peer reviewers terhadap IEP yang dikembangkan. Hasil penelitian menunjukkan slow learner membutuhkan IEP sebagai dokumen utama panduan guru dalam pembelajaran kimia di kelas. Komponen pengembangan IEP meliputi identitas peserta didik, tim pengembangan dan pelaksana, asesmen yang pernah dilakukan, hambatan dan kekuatan, kebutuhan dan perlakuan, faktor pendukung dan penghambat, rencana perlakuan, dan modifikasi terhadap perangkat pembelajaran kimia reguler

  15. Compilation of PZC and IEP of sparingly soluble metal oxides and hydroxides from literature.

    Science.gov (United States)

    Kosmulski, Marek

    2009-11-30

    The values of PZC and IEP of metal oxides reported in the literature are affected by the choice of the specimens to be studied. The specimens, which have PZC and IEP similar to the "recommended" value, are preferred by the scientists. The biased choice leads to accumulation of results for a few specimens, and the other specimens are seldom studied or they are subjected to washing procedures aimed at shift of the original IEP toward the "recommended" value. Taking the average or median of all published PZC and IEP for certain oxide as the "recommended" value leads to substantiation of previously published results due to overrepresentation of certain specimens in the sample.

  16. Local anti-fertility effect of inhibin-enriched preparation (IEP) in female hamsters.

    Science.gov (United States)

    Bapat, B V; Nandedkar, T D; Sheth, A R

    1984-04-01

    An inhibin-enriched preparation (IEP) involved in the regulation of follicle stimulating hormone (FSH) is known to play an important role in the normal ovarian cycle. In utero administration of 10 micrograms of IEP on day 3 of pregnancy completely prevented implantation in hamsters. No toxic effect of IEP was observed on the blastocysts as indicated by the dye exclusion test performed with Trypan blue. Thus, the results of the present study indicate an extra-pituitary site of action for the anti-implantation effect of IEP.

  17. BC Hydro's integrated resource planning : the 2004 IEP and beyond

    International Nuclear Information System (INIS)

    Soulsby, R.

    2004-01-01

    An outline of BC Hydro Integrated Electricity Plan (IEP) was presented in this paper, along with details of its environmental, social and business performance and statistics of its net income and revenue for 2003-2004. The IEP was created to match long term load to supply in the most cost-effective way and is also the basis for resource acquisition plans. In addition, the IEP models performance of portfolios of resources on a system-wide basis, considers uncertainties through sensitivity analysis and measures and evaluates multiple attributes from various portfolios. A flow chart of processes informed by the IEP was presented. Guiding principles behind the creation of the plan include low electricity rates and public ownership; secure, reliable supply; private sector development; environmental responsibility, with no nuclear power sources; ensuring energy self-sufficiency; and maintaining a balanced portfolio of resources. A pie chart of BC Hydro's current portfolio mix was presented as well as a supply and demand outlook and details of plans and new capacity resources required before 2013. Various resource options were presented. Key outcomes of First Nations and stakeholder engagement include the acceptance of BC Hydro as a sustainable energy company; a desire for higher priority on reliability and low cost; an agreement over the Power Smart 10 year plan; a general agreement that the current, balanced approach to resource acquisition was appropriate; and a desire for more rate options. There was an assurance that BC Hydro would continue to engage First Nations and stakeholders in integrated electricity planning. Other outcomes included requests for more information about outage and outage planning and process improvements; support to maintain low rates; a preference for maximizing use of existing facilities; support for wood waste cogeneration. A broad range of options were reviewed, but no superior portfolio was identified within the parameters of this paper

  18. Surface properties and dye loading behavior of Zn{sub 2}SnO{sub 4} nanoparticles hydrothermally synthesized using different mineralizers

    Energy Technology Data Exchange (ETDEWEB)

    Annamalai, Alagappan; Eo, Yang Dam [Department of Advanced Technology Fusion, Konkuk University, 1 Hwayang-dong, Kwangjin-gu, Seoul 143-701 (Korea, Republic of); Im, Chan [Department of Chemistry, Konkuk University, 1 Hwayang-dong, Kwangjin-gu, Seoul 143-701 (Korea, Republic of); Lee, Man-Jong, E-mail: leemtx@konkuk.ac.kr [Department of Advanced Technology Fusion, Konkuk University, 1 Hwayang-dong, Kwangjin-gu, Seoul 143-701 (Korea, Republic of)

    2011-10-15

    We present for the first time the influence of different mineralizers on the isoelectric point (IEP) of zinc stannate (Zn{sub 2}SnO{sub 4}) nanoparticles hydrothermally prepared using three different mineralizers, viz., Na{sub 2}CO{sub 3}, KOH and tert-butyl amine, and the effect of the IEPs on the dye loading behavior of Zn{sub 2}SnO{sub 4} based photoelectrodes in dye sensitized solar cells (DSSCs). To produce highly crystalline, uniform sized Zn{sub 2}SnO{sub 4} nanoparticles, hydrothermal processing parameters, such as reaction temperature, time, and the mineralizers used have been critically adjusted. The structural and morphological features of the as-synthesized Zn{sub 2}SnO{sub 4} nanoparticles have been observed using both scanning and transmission electron microscopy. For the surface state characterization of shape- and size-controlled Zn{sub 2}SnO{sub 4} nanoparticles, the IEPs of Zn{sub 2}SnO{sub 4} surfaces were determined through zeta potential measurements. The IEPs were found to be 5.7, 7.4 and 8.1 for Zn{sub 2}SnO{sub 4} nanoparticles formed using Na{sub 2}CO{sub 3}, KOH and tert-butyl amine, respectively, suggesting that the surface properties of Zn{sub 2}SnO{sub 4} nanoparticles can be manipulated through the choice of the mineralizers used during the hydrothermal reaction. The amount of N719 dye loading on the surfaces of Zn{sub 2}SnO{sub 4} electrodes having different IEPs was also evaluated. It was revealed that the higher the IEP, the higher the dye loading amount, which means that the IEP mainly affects the dye loading at the dye-metal oxide interface. - Highlights: {yields} The effect of various mineralizers on the isoelectric point of Zn{sub 2}SnO{sub 4} was discussed. {yields} The IEP of Zn{sub 2}SnO{sub 4} can be modified by the choice of mineralizer. {yields} Change in IEP affects the surface properties and the morphology of Zn{sub 2}SnO{sub 4} particles. {yields} Modified surface affects the N719 dye loading behaviour of the Zn{sub 2

  19. Understanding, Developing, and Writing Effective IEPs: A Step-by-Step Guide for Educators

    Science.gov (United States)

    Pierangelo, Roger; Giuliani, George A.

    2007-01-01

    Creating and evaluating Individualized Education Programs (IEPs) for students with disabilities is a major responsibility for teachers and school leaders, yet the process involves legal components not always understood by educators. In "Understanding, Developing, and Writing Effective IEPs," legal and special education experts Roger…

  20. Culturally and Linguistically Diverse Parents' Perceptions of the IEP Process

    Science.gov (United States)

    Wolfe, Katie; Durán, Lillian K.

    2013-01-01

    Many parents of students with disabilities face barriers to meaningful participation in Individualized Education Plan (IEP) meetings; parents who are culturally and linguistically diverse (CLD) encounter additional challenges. Given the changing demographics of the United States and the central role of the IEP in special education, it is important…

  1. The IEP Meeting: Perceptions of Parents of Students Who Receive Special Education Services

    Science.gov (United States)

    Fish, Wade W.

    2008-01-01

    The author investigated parental perceptions of the individualized education program (IEP) meeting among 51 parents of students who were receiving special education services from 1 family support service agency. Survey questions pertained to the following areas: (a) IEP meeting experiences, (b) knowledge level of special education law, (c)…

  2. Weer volop toekomst voor de iep Nieuwe iepen: zeer hoge mate van resistentie en algemeen bruikbaar

    NARCIS (Netherlands)

    Hiemstra, J.A.

    2013-01-01

    De iep is eeuwenlang een van de beeldbepalende bomen geweest in het Nederlandse landschap en de Nederlandse steden. Door de opkomst van de iepziekte zijn in de loop van de vorige eeuw veel van deze Hollandse iepen verdwenen. Door de voortdurende problemen met de iepziekte kreeg de iep bij veel

  3. Facilitated IEP Meetings. PACER Center ACTion Information Sheets: PHP-c90

    Science.gov (United States)

    PACER Center, 2014

    2014-01-01

    To help special education planning teams reach agreements, the Minnesota Department of Education, Compliance and Assistance, Alternative Dispute Resolution Services provide the option of facilitated IEP (Individualized Education Program) meetings. This option is available for IEP, IIIP (Individual Interagency Intervention Plan), and IFSP…

  4. Teachers' Perceptions of the Efficacy of Standards-Based IEP Goals

    Science.gov (United States)

    Smith, Traci Nicole

    2013-01-01

    Although standards-based IEP goals have been mandated in many states for almost a decade, their effectiveness is unknown. Standards-based IEP goals were first created to meet the requirements of No Child Left Behind and Individuals with Disabilities Education Improvement Act, which increased accountability for all students as well as those with…

  5. The Relationship of IEP Quality to Curricular Access and Academic Achievement for Students with Disabilities

    Science.gov (United States)

    La Salle, Tamika P.; Roach, Andrew T.; McGrath, Dawn

    2013-01-01

    The purpose of this study was to investigate the quality of Individualized Education Programs (IEPs) and its influence on academic achievement, inclusion in general education classrooms, and curricular access for students with disabilities. 130 teachers from the state of Indiana were asked to submit the most recent IEP of one of their students in…

  6. Self-Advocacy Skills as a Predictor of Student IEP Participation among Adolescents with Autism

    Science.gov (United States)

    Barnard-Brak, Lucy; Fearon, Danielle D.

    2012-01-01

    The importance of student IEP participation has been indicated by both legislative mandates such as IDEA and research literature. The purpose of the current study was to examine those variables that predict student IEP participation among adolescents with autism spectrum disorders as compared to adolescents with disabilities other than autism…

  7. Which Procedural Parts of the IEP Process Are the Most Judicially Vulnerable?

    Science.gov (United States)

    Zirkel, Perry A.; Hetrick, Allyse

    2017-01-01

    To provide a missing piece to the legal foundation of professional development and practice for the individualized education program (IEP) process, the authors report the results of a comprehensive systematic analysis of court decisions specific to IEP-related procedural violations after the 2004 amendments of the Individuals With Disabilities…

  8. Let's Get Parents Ready for Their Initial IEP Meeting

    Science.gov (United States)

    Hammond, Helen; Ingalls, Lawrence

    2017-01-01

    Parental participation in the initial Individual Education Program (IEP) meeting is a critical component of the process. Even though parents have rights to be equally involved in making decisions at the IEP meetings, frequently parents aren't prepared to be equal members on the team with school personnel. This study focused on a preparation…

  9. Hearing Parents of Children with Hearing Loss: Perceptions of the IEP Process

    Science.gov (United States)

    Stegman, Robin Fern

    2016-01-01

    Under federal guidelines, parents of school-aged children with hearing loss are required to attend an individualized education program (IEP) meeting on behalf of their child. However, it remains unclear how prepared hearing parents are to oversee development of IEPs that guarantee their children the best educational outcomes, as well as how much…

  10. The Impact of Professional Development on the Quality of the Transition Components of IEPs

    Science.gov (United States)

    Flannery, K. Brigid; Lombardi, Allison; Kato, Mimi McGrath

    2015-01-01

    Under the Individuals With Disabilities Education Act (IDEA), transition needs and services are to be discussed as part of the Individual Education Program (IEP) planning process, and decisions based on students' future goals are to be documented in the IEP. These transition requirements were included in IDEA in order to plan with the student,…

  11. The IEP from A to Z: How to Create Meaningful and Measurable Goals and Objectives

    Science.gov (United States)

    Twachtman-Cullen, Diane; Twachtman-Bassett, Jennifer

    2011-01-01

    With the skyrocketing diagnoses of ADHD, autism spectrum disorders, and related conditions in U.S. schools, there is a growing need for information on creating effective IEPs for exceptional students. The "IEP From A to Z" is a step-by-step guide showing teachers and parents how to get the right education plan in place for students with ADHD,…

  12. An Investigation into the Involvement of California Central Valley High School Students with Disabilities in the IEP Process

    Science.gov (United States)

    Anderson, Cheryle Ann

    2012-01-01

    The purpose of this study was to investigate the involvement of California Central Valley high school students with disabilities in the Individual Education Plan (IEP) process. Specifically, this study investigated the involvement of students with disabilities in the development of the IEP and IEP meetings. In addition, this study explored the…

  13. Perceptions of Parents of Students with Autism towards the IEP Meeting: A Case Study of One Family Support Group Chapter

    Science.gov (United States)

    Fish, Wade W.

    2006-01-01

    This case study investigated parental perceptions of students with autism towards the IEP meeting from one family support group chapter in the north Texas area. Participants were asked to share their experiences of previous IEP meetings and to provide input regarding not only measures that school districts may take towards improving IEP meetings,…

  14. Determination of Fluoride in Different Toothpaste Formulations

    International Nuclear Information System (INIS)

    Kamau, N.G.; Njoroge, M.; Njau, M.

    1998-01-01

    Fluoride ion selective electrode was used to determine fluoride ion concentrations in seven brands of toothpaste. These were the only available formulations found in Kenya. The brands were classified into three groups-fluoridated, non fluoridated or not indicated. However, there was no independent indication of their quantitative composition. The analysed brands had fluoride content between 0.0033% and 0.096%. These values compared favourably with those obtained elsewhere. The calculated lowest limit of detection (LLD) was 0.01 ppmF- . The mean calibration curve gave a slope of of -50.0mV. which was not significantly different from the theoretical value of 5.88mV at 23 degrees celsius at 95% confidence level

  15. Cloning and characterization of Bacillus subtilis iep, which has positive and negative effects on production of extracellular proteases.

    Science.gov (United States)

    Tanaka, T; Kawata, M

    1988-08-01

    We have isolated a DNA fragment from Bacillus subtilis 168 which, when present in a high-copy plasmid, inhibited production of extracellular alkaline and neutral proteases. The gene responsible for this activity was referred to as iep. The open reading frame of iep was found to be incomplete in the cloned DNA fragment. When the intact iep gene was reconstructed after the missing part of the iep gene had been cloned, it showed an enhancing effect on the production of the extracellular proteases. The open reading frame encodes a polypeptide of 229 amino acids with a molecular weight of ca. 25,866. Deletion of two amino acids from the N-terminal half of the putative iep protein resulted in dual effects, i.e., a decrease in the inhibitory activity shown by the incomplete iep gene and a slight increase in the enhancing activity shown by the complete iep gene. These results show that the iep gene product is a bifunctional protein, containing inhibitory and enhancing activities for the exoprotease production in the N-terminal and C-terminal regions, respectively. It was found by genetic and functional analyses that iep lies very close to sacU.

  16. Effect of smile index and incisal edge position on perception of attractiveness in different age groups.

    Science.gov (United States)

    Chou, J-C; Nelson, A; Katwal, D; Elathamna, E N; Durski, M T

    2016-11-01

    Changes in occlusal vertical dimension (OVD) and age have been found to affect Smile Index (SI, width/height of smile). Limited information is available regarding the aesthetic effects of these changes. The objective of this study was to evaluate the attractiveness of digitally manipulated smile images with differences in SI and incisal edge position (IEP) judged by respondents in different age groups. A total of 12 smile images were generated with varying SI (3·5, 5·3, 7·2, 9·0) and IEP (High, Medium, Low). Fifty respondents each in four age groups (15-24, 25-39, 40-54, 55+) evaluated the attractiveness of the 12 images using a 0-10 visual analog scale (VAS, 10 being most attractive). A repeated-measures three-factorial mixed model assessed differences. SI, IEP and age of respondents were found to significantly influence attractiveness score (P age groups combined, SI = 7·2/IEP = Medium was most attractive (VAS = 7·22), followed by SI = 9·0/IEP = Medium, and SI = 5·3/IEP = Medium (VAS = 6·53 and 6·48, respectively). SI = 3·5/IEP = High and SI = 3·5/IEP = Low were least attractive (VAS = 1·99 and VAS = 2·58, respectively). Age group significantly influenced aesthetic perception, with younger respondents more critical in differences in SI and IEP. SI and IEP significantly influenced attractiveness of the smile in all respondent age groups. Low SI (i.e. 3·5) combined with high or low IEP was unattractive. Medium SI to high SI (i.e. 5·3-9·0) combined with medium IEP were considered attractive. © 2016 John Wiley & Sons Ltd.

  17. Determination of genotype differences through restriction ...

    African Journals Online (AJOL)

    Tyrosinase gene or C locus has long been implicated in the coat colour determination. This gene a copper-containing enzyme located on chromosome 11q14.3 is expressed in melanocytes and controls the major steps in pigment production. In camel, C locus a restriction site provoked by the T variant of the mutation was ...

  18. Do the symptoms of language disorder align with treatment goals? An exploratory study of primary-grade students' IEPs.

    Science.gov (United States)

    Schmitt, Mary Beth; Justice, Laura M; Logan, Jessica A R; Schatschneider, Christopher; Bartlett, Christopher W

    2014-01-01

    Individual Education Plans (IEPs) are legal documents that guide the treatment of students with language disorder (LD). This exploratory study investigated the extent to which students' symptoms of LD align with goals on their IEPs. A total of 99 kindergarten and first-grade students receiving treatment for LD in the public schools participated. IEPs were collected and coded for each student and norm-referenced measures were used to assess students' grammar, vocabulary, listening comprehension, and literacy skills in the fall of the academic year. Results showed there to be alignment between students' symptoms and IEP goals only in the area of vocabulary, such that students who had an IEP goal for vocabulary had lower scores on a vocabulary assessment than those without a goal. In general, there is limited alignment between observed symptoms of LD and treated symptoms as identified on students' IEPs. The limited alignment found in this study suggests more investigation is needed to understand the extent to which IEP goals, as potential indicators of treatment foci, should map on to students' symptoms. Readers will be able to: (1) explain the theoretical and practical relevance of treatment goals aligning to symptoms for children with language impairment; (2) identify three analytic methods used to investigate alignment between treatment goals and symptoms; and (3) describe the extent to which IEP goals align to children's symptoms in a sample of children receiving services in the public schools. Copyright © 2014 Elsevier Inc. All rights reserved.

  19. The Development and Evaluation of a Professional Development Model to Build Meaningful and Effective IEPs for Transition-Aged Students

    Science.gov (United States)

    Doren, Bonnie; Flannery, K. Brigid; Lombardi, Allison

    2012-01-01

    The purpose of the study was to examine the potential efficacy of a professional development training model targeting IEP case managers of transition-age students. A training model was developed and a pilot study conducted to understand the promise of the model to improve the development of critical components within the IEP document that support…

  20. Structured Intervention as a Tool to Shift Views of Parent-Professional Partnerships: Impact on Attitudes toward the IEP

    Science.gov (United States)

    Mereoiu, Mariana; Abercrombie, Sarah; Murray, Mary M.

    2016-01-01

    The Individualized Education Program (IEP) is the roadmap that helps educators and families drive the education of students with disabilities, improve outcomes, and fulfill each child's potential. However, the IEP can be challenging due to the large number and diversity of stakeholders, dynamics and culture of collaboration, and the complex…

  1. Writing IEPs for the Audience of Teachers, Parents, and Students: The Case for the Communicative Individual Education Program

    Science.gov (United States)

    Lucido, Richard J.

    2013-01-01

    Our current paradigm of Individualized Education Program (IEP) construction, the creation of a legal document or contract between parents and schools, needs rethinking. This paradigm's unintended consequences have resulted in vast inefficiencies in special education and have detracted from the core purpose of the IEP document, the communication of…

  2. Accessing the Common Core Standards for Students with Learning Disabilities: Strategies for Writing Standards-Based IEP Goals

    Science.gov (United States)

    Caruana, Vicki

    2015-01-01

    Since the reauthorization of the Individuals With Disabilities Education Act (IDEA) in 2004, standards-based individualized education plans (IEPs) have been an expectation for serving students with disabilities in the K-12 public school setting. Nearly a decade after the mandates calling for standards-based IEPs, special educators still struggle…

  3. CORPORATE STRATEGY: RELATIONSHIP BETWEEN THE IDP, IEP AND PLANNING STRATEGIC IN IFB

    Directory of Open Access Journals (Sweden)

    Pedro Henrique Rodrigues de Camargo Dias

    2017-08-01

    Full Text Available This study aims to identify and characterize the relationship of the Institutional Development Plan - IDP -, Institutional Educational Project - IEP, - and the strategic planning, specifically in the context of organizational effectiveness.  IDP, IEP and Strategic Planning at the Federal Institution of Brasilia (Instituto Federal de Brasilia IFB interrelate and interact due to its strategic nature and focus on organizational results. The qualitative study of applied nature and exploratory personality, is instrumentalized by documentary techniques  and semi-structured interviews and content analysis. The results showed that the efficient integration of IDP, IEP and Strategic Planning, and also communicate the mission, objectives and institutional goals, corroborate the construction of a reference institution with the quality of education, stating its social function, guiding the action of servers and managers.

  4. Teacher and child predictors of achieving IEP goals of children with autism.

    Science.gov (United States)

    Ruble, Lisa; McGrew, John H

    2013-12-01

    It is encouraging that children with autism show a strong response to early intervention, yet more research is needed for understanding the variability in responsiveness to specialized programs. Treatment predictor variables from 47 teachers and children who were randomized to receive the COMPASS intervention (Ruble et al. in The collaborative model for promoting competence and success for students with ASD. Springer, New York, 2012a) were analyzed. Predictors evaluated against child IEP goal attainment included child, teacher, intervention practice, and implementation practice variables based on an implementation science framework (Dunst and Trivette in J Soc Sci 8:143-148, 2012). Findings revealed one child (engagement), one teacher (exhaustion), two intervention quality (IEP quality for targeted and not targeted elements), and no implementation quality variables accounted for variance in child outcomes when analyzed separately. When the four significant variables were compared against each other in a single regression analysis, IEP quality accounted for one quarter of the variance in child outcomes.

  5. Islam - Science Integration Approach in Developing Chemistry Individualized Education Program (IEP for Students with Disabilities

    Directory of Open Access Journals (Sweden)

    Jamil Suprihatiningrum

    2017-11-01

    Full Text Available The paper is based on a research which tries to explore, explain and describe Islam - science integration approach to develop an Individualized Education Program (IEP for students with disabilities in chemistry lesson. As a qualitative case study, this paper is aimed at investigating how Islam - science integration approach can be underpinned for developing the IEP for Chemistry. Participants were recruited purposively and data were collected by interviews; documents’ analysis; and experts’ assessment (i.e. material experts, inclusive education experts, media experts, chemistry teachers and support teachers, then analyzed using content-analysis. The result shows Islam - science integration approach can be a foundation to develop the chemistry IEP by seeking support for the verses of the Qur'an and corresponding hadiths. Even although almost all the subject matter in chemistry can be integrated with Islamic values, this study only developed two contents, namely Periodic System of Elements and Reaction Rate.

  6. IEP as a parameter characterizing the pH-dependent surface charging of materials other than metal oxides.

    Science.gov (United States)

    Kosmulski, Marek

    2012-01-01

    The numerical values of points of zero charge (PZC, obtained by potentiometric titration) and of isoelectric points (IEP) of various materials reported in the literature have been analyzed. In sets of results reported for the same chemical compound (corresponding to certain chemical formula and crystallographic structure), the IEP are relatively consistent. In contrast, in materials other than metal oxides, the sets of PZC are inconsistent. In view of the inconsistence in the sets of PZC and of the discrepancies between PZC and IEP reported for the same material, it seems that IEP is more suitable than PZC as the unique number characterizing the pH-dependent surface charging of materials other than metal oxides. The present approach is opposite to the usual approach, in which the PZC and IEP are considered as two equally important parameters characterizing the pH-dependent surface charging of materials other than metal oxides. Copyright © 2012 Elsevier B.V. All rights reserved.

  7. Immunoevasive protein (IEP)-containing surface layer covering polydnavirus particles is essential for viral infection.

    Science.gov (United States)

    Furihata, Shunsuke; Tanaka, Kohjiro; Ryuda, Masasuke; Ochiai, Masanori; Matsumoto, Hitoshi; Csikos, Gyorge; Hayakawa, Yoichi

    2014-01-01

    Polydnaviruses (PDVs) are unique symbiotic viruses associated with parasitoid wasps: PDV particles are injected into lepidopteran hosts along with the wasp eggs and express genes that interfere with aspects of host physiology such as immune defenses and development. Recent comparative genomic studies of PDVs have significantly improved our understanding of their origin as well as the genome organization. However, the structural features of functional PDV particles remain ambiguous. To clear up the structure of Cotesia kariyai PDV (CkPDV) particles, we focused on immunoevasive protein (IEP), which is a mediator of immunoevasion by the wasp from the encapsulation reaction of the host insect's hemocytes, because it has been demonstrated to be present on the surface of the virus particle. We discovered that IEP tends to polymerize and constitutes a previously unidentified thin surface layer covering CkPDV particles. This outermost surface layer looked fragile and was easily removed from CkPVD particles by mechanical stressors such as shaking, which prevented CkPDV from expressing the encoded genes in the host target tissues such as fat body or hemocytes. Furthermore, we detected IEP homologue gene expression in the wasp's venom reservoirs, implying IEP has another unknown biological function in the wasp or parasitized hosts. Taken together, the present results demonstrated that female C. kariyai wasps produce the fragile thin layer partly composed of IEP to cover the outer surfaces of CkPDV particles; otherwise, they cannot function as infectious agents in the wasp's host. The fact that IEP family proteins are expressed in both venom reservoirs and oviducts suggests an intimate relationship between both tissues in the development of the parasitism strategy of the wasp. Copyright © 2013 Elsevier Inc. All rights reserved.

  8. Using laser technological unit ALTI "Karavella" for precision components of IEP production

    Science.gov (United States)

    Labin, N. A.; Chursin, A. D.; Paramonov, V. S.; Klimenko, V. I.; Paramonova, G. M.; Kolokolov, I. S.; Vinogradov, K. Y.; Betina, L. L.; Bulychev, N. A.; Dyakov, Yu. A.; Zakharyan, R. A.; Kazaryan, M. A.; Koshelev, K. K.; Kosheleva, O. K.; Grigoryants, A. G.; Shiganov, I. N.; Krasovskii, V. I.; Sachkov, V. I.; Plyaka, P. S.; Feofanov, I. N.; Chen, C.

    2015-12-01

    The paper revealed the using of industrial production equipment ALTI "Karavella-1", "Karavella-1M", "Karavella-2" and "Karavella-2M" precision components of IEP production [1-4]. The basis for the ALTI using in the IEP have become the positive results of research and development of technologies of foil (0.01-0.2 mm) and thin sheets (0.3-1 mm) materials micromachining by pulsed radiation CVL [5, 6]. To assess the micromachining quality and precision the measuring optical microscope (UHL VMM200), projection microscope (Mitutoyo PV5100) and Carl Zeiss microscope were used.

  9. The inadequacy of Individual Educational Program (IEP) goals for high school students with word-level reading difficulties.

    Science.gov (United States)

    Catone, William V; Brady, Susan A

    2005-06-01

    This investigation analyzed goals from the Individual Educational Programs (IEPs) of 54 high school students with diagnosed reading disabilities in basic skills (decoding and/or word identification). Results showed that for 73% of the students, the IEPs written when they were in high school failed to specify any objectives regarding their acute difficulties with basic skills. IEPs from earlier points in the students' educations were also reviewed, as available. For 23 of the students, IEPs were present in the students' files for three time points: elementary school (ES), middle school (MS), and high school (HS). Another 20 students from the sample of 54 had IEPs available for two time points (HS and either MS or ES). Comparisons with the IEPs from younger years showed a pattern of decline from ES to MS to HS in the percentage of IEPs that commented on or set goals pertaining to weaknesses in decoding. These findings suggest that basic skills deficits that persist into the upper grade levels are not being sufficiently targeted for remediation, and help explain why older students frequently fail to resolve their reading problems.

  10. Toward Authentic IEPs and Transition Plans: Student, Parent, and Teacher Perspectives

    Science.gov (United States)

    Cavendish, Wendy; Connor, David

    2018-01-01

    This mixed-methods study examined perspectives on factors that influence meaningful student and parent involvement in Individualized Education Program (IEP) transition planning. Survey data and open-ended qualitative interviews with urban high school students with a learning disability (LD; n = 16), their parents (n = 9), and their teachers (n =…

  11. The Essential and Interrelated Components of Evidenced-Based IEPs: A User's Guide

    Science.gov (United States)

    Hauser, Marc D.

    2017-01-01

    Individualized education program (IEP) goals and objectives often provide illogical or insufficient methodological detail (e.g., Capizzi, 2008). Insufficient methods can lead to ambiguity among the staff members responsible for data collection or to data that fail to take into account factors that can affect performance or behavioral expression…

  12. State of the Art Student Support Services in an IEP Learning Center

    Science.gov (United States)

    Hanson, Jessica; Maxwell, Jeffrey; Mulder, Monika

    2015-01-01

    Intensive English language programs (IEPs) at American universities have the task of recruiting, retaining, and preparing international students for mainstream classes. In order to achieve these tasks, many programs have explored using supplemental instruction (SI) in the form of learning centers (LCs) to support their students. In this study, we…

  13. Collaboration during IEP and IFSP Meetings in a Refugee Resettlement Community: Lessons from Cultural Liaisons

    Science.gov (United States)

    Hurley, Jennifer J.; Clark, David W.; Fonseca-Foster, Katherine A.; Pyne, Sabina K.; Warren, Rachel A.

    2017-01-01

    Teachers working with refugee families who are culturally and linguistically diverse (CLD) and receiving special education services often rely on cultural liaisons to provide interpreter and translator services during Individualized Educational Program (IEP) and Individualized Family Service Plan (IFSP) meetings. The purpose of this qualitative…

  14. Background of Individual Education Plans (IEPs) Policy in Some Countries: A Review

    Science.gov (United States)

    Alkahtani, Mohammed Ali; Kheirallah, Sahar Abdelfattah

    2016-01-01

    This paper seeks to provide a cogent outline of the current policies that six separate countries have on Individual Education Plans (IEPs), identifying the key features in each system. The chosen countries are Australia (Queen Island), Canada (British Columbia), New Zealand, the United Kingdom, the United States of America, and Saudi Arabia. The…

  15. Advancing Inclusive Mathematics Education: Strategies and Resources for Effective IEP Practices

    Science.gov (United States)

    Tan, Paulo

    2017-01-01

    Personal experiences promoting inclusive mathematics education for my own child have mostly been met with staunch resistance on the part of educators, and a resulting breakdown in collaborative efforts during individualized education program (IEP) meetings. However, I found that utilizing certain strategies and introducing innovative mathematics…

  16. Demystifying the IEP Process for Diverse Parents of Children with Disabilities

    Science.gov (United States)

    Lo, Lusa

    2012-01-01

    The complicated individualized education program (IEP) process and annual team meetings can be very stressful for families of children with disabilities, especially for those whose primary language is not English and those who are unfamiliar with the American special education system. Cultural and language barriers and lack of information…

  17. High School General Education English Teachers' Perception of IEP Accommodations for Students with Asperger Syndrome

    Science.gov (United States)

    Krones, Mary Patricia

    2016-01-01

    The purpose of this qualitative design study was to better understand the experiences of high school general education English teachers who have students with Asperger Syndrome in their classes. More specifically, this researcher wanted to better understand the teacher's perception of the IEP-denoted accommodations the general education teachers…

  18. Social Media Literacy as an IEP Intervention for Social and Emotional Learning

    Science.gov (United States)

    Probst, Donnell

    2017-01-01

    Media literacy and special education communities have largely ignored the impact of digital media useonspecial education students with Autism spectrum disorder and Emotional and Behavioral Disorder. This paper investigates the possibility of using social media literacy education as part of an individualized education plan (IEP) intervention for…

  19. An Investigation of Student Involvement in IEP Meetings in Suffolk County, New York

    Science.gov (United States)

    Jurgens, Matthew A.

    2016-01-01

    The purpose of this study was to identify the possible barriers as to why student involvement in IEP meetings has not been occurring in the past and to subsequently suggest further action and research as to how to potentially combat these barriers so students with disabilities in Suffolk County, Long Island can begin to be offered these kinds of…

  20. Six Things to Never Say or Hear during an IEP Meeting: Educators as Advocates for Families

    Science.gov (United States)

    Cheatham, Gregory A.; Hart, Juliet E.; Malian, Ida; McDonald, Joan

    2012-01-01

    The purpose of this paper is to support school professionals in their work with parents as they meet IDEA (2004) requirements during IEP meetings. The authors share tools to help recognize when IDEA principles are violated and provide alternative responses that school professionals and parents can offer. Definitions and brief explanations of the…

  1. How Well Does Your IEP Measure Up?: Quality Indicators for Effective Service Delivery.

    Science.gov (United States)

    Twachtman-Cullen, Diane; Twachtman-Reilly, Jennifer

    This book is intended to offer guidance in writing individualized education programs (IEPs) that deliver high-quality, need-based educational programming for students with autism spectrum disorders. Following an introductory historical overview of special education law, the remaining chapters in part 1 address the quality indicators for each of…

  2. Determination of heavy metals in chinese prickly ash from different ...

    African Journals Online (AJOL)

    Methods: CPA samples collected from different production areas in China were subjected to microwave digestion, and the contents of copper (Cu), nickel (Ni), chromium (Cr), lead (Pb), cadmium (Cd), arsenic (As), mercury (Hg), tin (Sn), and antimony (Sb) were determined by inductively coupled plasma-mass spectrometry ...

  3. The application of different techniques to determine activated sludge ...

    African Journals Online (AJOL)

    The application of different techniques to determine activated sludge kinetic parameters in a food industry wastewater. ... method) and a respirometric technique based on oxygen consumption measurements, were used to compare microbial parameters using a wastewater model system of a potato processing plant.

  4. Guiding IEP Teams on Meeting the Least Restrictive Environment Mandate

    Science.gov (United States)

    Marx, Teri A.; Hart, Jennifer L.; Nelson, Leslie; Love, Jessica; Baxter, Christine M.; Gartin, Barbara; Schaefer Whitby, Peggy J.

    2014-01-01

    Two diametrically opposed beliefs are held concerning the meaning of the least restrictive environment (LRE) when determining the class placements of students with disabilities. One group adheres to the placement philosophy that the LRE is always the general education setting. The other group believes that the LRE is where the students' needs may…

  5. Different ways to handle topography in practical geoid determination

    DEFF Research Database (Denmark)

    Dahl, O.C.; Forsberg, René

    1999-01-01

    In this paper two different methods of how to handle topography in geoid determination is investigated. First method employs the Residual Terrain Model (RTM) remove-restore technique and yields the quasigeoid, whereas the second method is the classical Helmert condensation method, yielding...... the topography was represented by either a detailed (100 m) or a coarse (1000 m) digital terrain model. The inclusion of bathymetry in the terrain model was also investigated. Even if two different methods were used, they produced almost identical results at the 5 cm level in the mountains, but small systematic...

  6. Electroacoustic isoelectric point determinations of bauxite refinery residues: different neutralization techniques and minor mineral effects.

    Science.gov (United States)

    Freire, Tiago S S; Clark, Malcolm W; Comarmond, M Josick; Payne, Timothy E; Reichelt-Brushett, Amanda J; Thorogood, Gordon J

    2012-08-14

    Bauxite refinery residue (BRR) is a highly caustic, iron hydroxide-rich byproduct from alumina production. Some chemical treatments of BRR reduce soluble alkalinity and lower residue pH (to values work shows that minor mineral components in complex mineral systems may have a disproportionate effect on the observable bulk IEP. Furthermore, this work shows the appropriateness of electroacoustic techniques in investigating samples with significant soluble mineral components (e.g., ANC).

  7. Determinants related to gender differences in general practice utilization

    DEFF Research Database (Denmark)

    Jørgensen, Jeanette Therming; Andersen, John Sahl; Tjønneland, Anne

    2016-01-01

    OBJECTIVE: This study aims to describe the determinants related to gender differences in the GP utilization in Danish population aged 50-65 years. DESIGN: Cohort-based cross-sectional study. SETTING: Danish general practice. SUBJECTS: Totally, 54,849 participants of the Danish Diet, Cancer...... information on lifestyle (smoking, body mass index (BMI), alcohol use, physical activity), medical conditions (somatic and mental), employment, education, gravidity, and hormone therapy (HT) use was collected by questionnaire. RESULTS: Women had on average 4.1 and men 2.8 consultations per year. In a crude....... Strongest determinants for GP use among Danish adults aged 50-65 years were the presence of medical conditions (somatic and mental) and unemployment, while lifestyle factors (e.g., body mass index, alcohol consumption and smoking) had minor effect....

  8. Can Appreciative Inquiry Increase Positive Interactions, Student Self-Advocacy and Turn-Taking during IEP Meetings?

    Science.gov (United States)

    Kozik, Peter L.

    2018-01-01

    This comparative research study in the context of action research documents the effects of Appreciative Inquiry (AI) on positive participant interactions, student turn-taking and self-advocacy interactions during IEP meetings that focused on student transition to post-secondary outcomes. AI was implemented as a written protocol for conducting IEP…

  9. Has Technology Been Considered? A Guide for IEP Teams. CASE/TAM Assistive Technology Policy and Practice Series.

    Science.gov (United States)

    Chambers, A. C.

    This guide compiles information essential to a working knowledge of assistive technology for children with disabilities. It addresses the definition of assistive technology and provides information on laws which direct the provision of assistive technology. The manual provides a framework to guide the Individualized Education Program (IEP) team as…

  10. Enhancing Recognition of High Quality, Functional IEP Goals: A Training Activity for Early Childhood Special Education Staff

    Science.gov (United States)

    Lucas, Anne; Gillaspy, Kathi; Peters, Mary Louise; Hurth, Joicey

    2014-01-01

    This training activity was created to support participants' understanding of the criteria needed to develop and write high quality, participation-based Individualized Education Program (IEP) goals. The term "functional" is often used to describe what goals ought to be, yet many Early Childhood Special Education (ECSE) staff (e.g.,…

  11. The Use of a Rubric as a Tool to Guide Pre-Service Teachers in the Development of IEPs

    Science.gov (United States)

    Rosas, Clarissa E.; Winterman, Kathleen G.

    2012-01-01

    The challenge of developing Individualized Education Program documents that are representative of a team decision making process and are in compliance with IDEA 2004 is well documented in the literature. One of the main objectives of IEPs is to serve as the foundation of a child's academic program. Inclusion of children with disabilities in the…

  12. Effects of School Counselor Supervised Peer Tutoring in Inclusive Settings on Meeting IEP Outcomes of Students with Developmental Disabilities

    Science.gov (United States)

    Odluyurt, Serhat; Tekin-Iftar, Elif; Ersoy, Gulhan

    2014-01-01

    The purpose of this study was to investigate the effects of school counselor supervised peer tutoring intervention on meeting IEP outcomes of six inclusion students with developmental disabilities in a public elementary and secondary school. The effectiveness of this intervention was evaluated by using multiple probe design across students.…

  13. Determination of Biogenic Amines in Different Shrimp Species for Export

    International Nuclear Information System (INIS)

    Myat Myat Thaw; Oo Aung; Aung Myint; Bisswanger, Hans

    2004-06-01

    This study is part of the project on the ''Quality Assurance of Different Shrimp Species for Export''. Local shrimp samples were collected from Ministry of Livestock and Fisheries and various private enterprises. Contents of biogenic amines were determined by using benzoyl chloride derivatization method with HPLC (reverse phase high performance liquid chromatography). Based on the biogenic amines, quality index of shrimps were correlated with freshness index so that the grade of shrimp samples can be classified as excellent, good, and acceptable. All sizes of shrimps such as extra large, large, medium were found to excceptable respectively

  14. Comparative study using different resins to determine thorium isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Rosa, Mychelle M.L.; Silva, Paulo S.C.; Maihara, Vera A., E-mail: my_linhares@yahoo.com.br, E-mail: pscsilva@ipen.br, E-mail: vmaihara@ipen.br [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP), São Paulo, SP (Brazil); Taddei, Maria Helena T., E-mail: mhtaddei@cnen.gov.br [Comissão Nacional de Energia Nuclear (LAPOC/CNEN), Poços de Caldas, MG (Brazil). Laboratório de Pocos de Caldas; Cheberle, Luan T.V., E-mail: luancheberle@gmail.com [Ambientis Radioproteção, Barueri, SP (Brazil)

    2017-07-01

    Thorium is a naturally occurring radioactive element that is widely distributed in the crust of the Earth. This element is very common in mineral formations in regions with high levels of natural radioactivity, therefore, its determination in environmental samples is important. Thorium isotopes ({sup 228}Th, {sup 230}Th, and {sup 232}Th) were determined in a reference material, the IAEA Soil 327 sample, to validate the two methods employed using different resins. The initial preparation with acid dissolution is the same to both, in the first is used anion exchange resin (DOWEX 1 x 2) and electrodeposition in silver planchets. And in the second method is used a specific chromatographic resin (TEVA) and cerium fluoride microprecipitation. At the end both analysis are quantified by alpha spectrometry. The two methods the results obtained were satisfactory for the reference material used, with relative error of less than 4% for {sup 228}Th, {sup 230}Th, and {sup 232}Th. The main differences found between them were spectrums resolutions, time and cost of analysis. (author)

  15. Determination of uranium in ground water using different analytical techniques

    International Nuclear Information System (INIS)

    Sahu, S.K.; Maity, Sukanta; Bhangare, R.C.; Pandit, G.G.; Sharma, D.N.

    2014-10-01

    The concern over presence of natural radionuclides like uranium in drinking water is growing recently. The contamination of aquifers with radionuclides depends on number of factors. The geology of an area is the most important factor along with anthropogenic activities like mining, coal ash disposal from thermal power plants, use of phosphate fertilizers etc. Whatever may be the source, the presence of uranium in drinking waters is a matter of great concern for public health. Studies show that uranium is a chemo-toxic and nephrotoxic heavy metal. This chemotoxicity affects the kidneys and bones in particular. Seeing the potential health hazards from natural radionuclides in drinking water, many countries worldwide have adopted the guideline activity concentration for drinking water quality recommended by the WHO (2011). For uranium, WHO has set a limit of 30μgL-1 in drinking water. The geological distribution of uranium and its migration in environment is of interest because the element is having environmental and exposure concerns. It is of great interest to use an analytical technique for uranium analysis in water which is highly sensitive especially at trace levels, specific and precise in presence of other naturally occurring major and trace metals and needs small amount of sample. Various analytical methods based on the use of different techniques have been developed in the past for the determination of uranium in the geological samples. The determination of uranium requires high selectivity due to its strong association with other elements. Several trace level wet chemistry analytical techniques have been reported for uranium determination, but most of these involve tedious and pain staking procedures, high detection limits, interferences etc. Each analytical technique has its own merits and demerits. Comparative assessment by different techniques can provide better quality control and assurance. In present study, uranium was analysed in ground water samples

  16. Determining color difference thresholds in denture base acrylic resin.

    Science.gov (United States)

    Ren, Jiabao; Lin, Hong; Huang, Qingmei; Zheng, Gang

    2015-11-01

    In restorative prostheses, color is important, but the choice of color difference formula used to quantify color change in acrylic resins is not straightforward. The purpose of this in vitro study was to choose a color difference formula that best represented differences between the calculated color and the observed imperceptible to unacceptable color and to determine the corresponding perceptibility and acceptability threshold of color stability for denture base acrylic resins. A total of 291 acrylic resin denture base plates were fabricated and subjected to radiation tests from zero to 42 hours in accordance with ISO 7491:2000. Color was measured with a portable spectrophotometer, and color differences were calculated with 3 International Commission on Illumination (CIE) formulas: CIELab, CMC(1:1), and CIEDE2000. Thirty-four observers with no deficiencies in color perception participated in psychophysical perceptibility and acceptability assessments under controlled conditions in vitro. These 2 types of assessments were regressed to each observer by each formula to generate receiver operator characteristic (ROC) curves. Areas under the curves (AUCs) were then calculated and analyzed to exclude observers with poor color discrimination. AUCs were subjected to 1-way ANOVA (α=.05) to deter the statistical significance of discriminability among the 3 formulas in terms of perceptibility and acceptability judgments. Student-Newman-Keuls tests (α=.05) were used for post hoc comparison. CMC(1:1) and CIEDE2000 formulas performed better for imperceptible to unacceptable color differences, with corresponding CMC(1:1) and CIEDE2000 values for perceptibility of 2.52 and 1.72, respectively, and acceptability thresholds of 6.21 and 4.08, respectively. Formulas CMC(1:1) and CIEDE2000 possess higher discriminability than that of CIELab in the assessment of perceptible color difference threshold of denture base acrylic resin. A statistically significant difference exists

  17. Substitution determination of Fmoc‐substituted resins at different wavelengths

    Science.gov (United States)

    Kley, Markus; Bächle, Dirk; Loidl, Günther; Meier, Thomas; Samson, Daniel

    2017-01-01

    In solid‐phase peptide synthesis, the nominal batch size is calculated using the starting resin substitution and the mass of the starting resin. The starting resin substitution constitutes the basis for the calculation of a whole set of important process parameters, such as the number of amino acid derivative equivalents. For Fmoc‐substituted resins, substitution determination is often performed by suspending the Fmoc‐protected starting resin in 20% (v/v) piperidine in DMF to generate the dibenzofulvene–piperidine adduct that is quantified by ultraviolet–visible spectroscopy. The spectrometric measurement is performed at the maximum absorption wavelength of the dibenzofulvene–piperidine adduct, that is, at 301.0 nm. The recorded absorption value, the resin weight and the volume are entered into an equation derived from Lambert–Beer's law, together with the substance‐specific molar absorption coefficient at 301.0 nm, in order to calculate the nominal substitution. To our knowledge, molar absorption coefficients between 7100 l mol−1 cm−1 and 8100 l mol−1 cm−1 have been reported for the dibenzofulvene–piperidine adduct at 301.0 nm. Depending on the applied value, the nominal batch size may differ up to 14%. In this publication, a determination of the molar absorption coefficients at 301.0 and 289.8 nm is reported. Furthermore, proof is given that by measuring the absorption at 289.8 nm the impact of wavelength accuracy is reduced. © 2017 The Authors Journal of Peptide Science published by European Peptide Society and John Wiley & Sons Ltd. PMID:28635051

  18. Substitution determination of Fmoc-substituted resins at different wavelengths.

    Science.gov (United States)

    Eissler, Stefan; Kley, Markus; Bächle, Dirk; Loidl, Günther; Meier, Thomas; Samson, Daniel

    2017-10-01

    In solid-phase peptide synthesis, the nominal batch size is calculated using the starting resin substitution and the mass of the starting resin. The starting resin substitution constitutes the basis for the calculation of a whole set of important process parameters, such as the number of amino acid derivative equivalents. For Fmoc-substituted resins, substitution determination is often performed by suspending the Fmoc-protected starting resin in 20% (v/v) piperidine in DMF to generate the dibenzofulvene-piperidine adduct that is quantified by ultraviolet-visible spectroscopy. The spectrometric measurement is performed at the maximum absorption wavelength of the dibenzofulvene-piperidine adduct, that is, at 301.0 nm. The recorded absorption value, the resin weight and the volume are entered into an equation derived from Lambert-Beer's law, together with the substance-specific molar absorption coefficient at 301.0 nm, in order to calculate the nominal substitution. To our knowledge, molar absorption coefficients between 7100 l mol -1  cm -1 and 8100 l mol -1  cm -1 have been reported for the dibenzofulvene-piperidine adduct at 301.0 nm. Depending on the applied value, the nominal batch size may differ up to 14%. In this publication, a determination of the molar absorption coefficients at 301.0 and 289.8 nm is reported. Furthermore, proof is given that by measuring the absorption at 289.8 nm the impact of wavelength accuracy is reduced. © 2017 The Authors Journal of Peptide Science published by European Peptide Society and John Wiley & Sons Ltd. © 2017 The Authors Journal of Peptide Science published by European Peptide Society and John Wiley & Sons Ltd.

  19. Domestic and Foreign Banks’ Profitability: Differences and Their Determinants

    Directory of Open Access Journals (Sweden)

    Muhammad AZAM

    2012-01-01

    Full Text Available The purpose of this study to analyze and compare the profitability of domestic (Public & Private and foreign banks operating in the Pakistan Banking market between 2004 and 2010 on quarterly basis. Total 36 Commercial Banks of Pakistani Industry have represented our sample. To control for the effect of bank ownership on performance, we split the sample into three categories: (1 domestic banks with Government Control, (2 domestic banks with Private control, and (3 foreign banks. This study also finds that foreign banks are more profitable than all domestic banks regardless of their ownership structure by applying regression analysis. This may suggest that it is better for a multinational bank to establish a subsidiary/branch rather than acquiring an “existing player” in the host country. We also found that domestic and foreign banks have different profitability determinants, i.e. factors that are important in shaping domestic banks’ profitability are not necessary important for the foreign banks and vice versa. Empirical results show that foreign banks are less affected by the macroeconomic factors of the host country than domestic banks and they have a higher profitability margin in Pakistan.

  20. Crystalline lens thickness determines the perceived chromatic difference in magnification.

    Science.gov (United States)

    Chen, Yun; Schaeffel, Frank

    2014-03-01

    Since the origin of the high interindividual variability of the chromatic difference in retinal image magnification (CDM) in the human eye is not well understood, optical parameters that might determine its magnitude were studied in 21 healthy subjects with ages ranging from 21 to 58 years. Two psychophysical procedures were used to quantify CDM. They produced highly correlated results. First, a red and a blue square, presented on a black screen, had to be matched in size by the subjects with their right eyes. Second, a filled red and blue square, flickering on top of each other at 2 Hz, had to be adjusted in perceived brightness and then in size to minimize the impression of flicker. CDM varied widely among subjects from 0.0% to 3.6%. Biometric ocular parameters were measured with low coherence interferometry and crystalline lens tilt and decentration with a custom-built Purkinjemeter. Correlations were studied between CDM and corneal power, anterior chamber depth, lens thickness, lens tilt and lens decentration, and vitreous chamber depths. Lens thickness was found significantly correlated with CDM and accounted for 64% of its variance. Vertical lens tilt and decentration were also significantly correlated. It was also found that CDM increased by 3.5% per year, and part of this change can be attributed to the age-related increase in lens thickness.

  1. Determining photon energy absorption parameters for different soil samples

    International Nuclear Information System (INIS)

    Kucuk, Nil; Cakir, Merve; Tumsavas, Zeynal

    2013-01-01

    The mass attenuation coefficients (μ s ) for five different soil samples were measured at 661.6, 1173.2 and 1332.5 keV photon energies. The soil samples were separately irradiated with 137 Cs and 60 Co (370 kBq) radioactive point gamma sources. The measurements were made by performing transmission experiments with a 2″ x 2″ NaI(Tl) scintillation detector, which had an energy resolution of 7% at 0.662 MeV for the gamma-rays from the decay of 137 Cs. The effective atomic numbers (Z eff ) and the effective electron densities (N eff ) were determined experimentally and theoretically using the obtained μ s values for the soil samples. Furthermore, the Z eff and N eff values of the soil samples were computed for the total photon interaction cross-sections using theoretical data over a wide energy region ranging from 1 keV to 15 MeV. The experimental values of the soils were found to be in good agreement with the theoretical values. Sandy loam and sandy clay loam soils demonstrated poor photon energy absorption characteristics. However, clay loam and clay soils had good photon energy absorption characteristics. (author)

  2. {sup 14}C determination in different bio-based products

    Energy Technology Data Exchange (ETDEWEB)

    Santos Arévalo, Francisco-Javier, E-mail: fj.santos@csic.es [Centro Nacional de Aceleradores (Universidad de Sevilla, Consejo Superior de Investigaciones Científicas, Junta de Andalucía), Thomas Alva Edison 7, 41092 Seville (Spain); Gómez Martínez, Isabel; Agulló García, Lidia; Reina Maldonado, María-Teresa [Centro Nacional de Aceleradores (Universidad de Sevilla, Consejo Superior de Investigaciones Científicas, Junta de Andalucía), Thomas Alva Edison 7, 41092 Seville (Spain); García León, Manuel [Centro Nacional de Aceleradores (Universidad de Sevilla, Consejo Superior de Investigaciones Científicas, Junta de Andalucía), Thomas Alva Edison 7, 41092 Seville (Spain); Dpto. de Física Atómica Molecular y Nuclear, Universidad de Sevilla, Reina Mercedes s/n, 41012 Seville (Spain)

    2015-10-15

    Radiocarbon determination can be used as a tool to investigate the presence of biological elements in different bio-based products, such as biodiesel blends. These products may also be produced from fossil materials obtaining the same final molecules, so that composition is chemically indistinguishable. The amount of radiocarbon in these products can reveal how much of these biological elements have been used, usually mixed with petrol derived components, free of {sup 14}C. Some of these products are liquid and thus the handling at the laboratory is not as straightforward as with solid samples. At Centro Nacional de Aceleradores (CNA) we have tested the viability of these samples using a graphitization system coupled to an elemental analyzer used for combustion of the samples, thus avoiding any vacuum process. Samples do not follow any chemical pre-treatment procedure and are directly graphitized. Specific equipment for liquid samples related to the elemental analyzer was tested. Measurement of samples was performed by low-energy AMS at the 1 MV HVEE facility at CNA, paying special attention to background limits and reproducibility during sample preparation.

  3. Inteligência emocional percebida (IEP ajuste emocional e actividade física na terceira idade

    Directory of Open Access Journals (Sweden)

    Maria Manuela Lima de Figueiredo Queirós

    2007-06-01

    Full Text Available O interesse deste estudo está centrado na forma como interage a inteligência emocional percebida (IEP com a prática da actividade física e que peso específi co tem cada uma das variáveis estudadas sobre o ajuste emocional das pessoas nesta faixa etária e, consequentemente, na sua qualidade de vida.

  4. Determination of finite-difference weights using scaled binomial windows

    KAUST Repository

    Chu, Chunlei; Stoffa, Paul L.

    2012-01-01

    The finite-difference method evaluates a derivative through a weighted summation of function values from neighboring grid nodes. Conventional finite-difference weights can be calculated either from Taylor series expansions or by Lagrange interpolation polynomials. The finite-difference method can be interpreted as a truncated convolutional counterpart of the pseudospectral method in the space domain. For this reason, we also can derive finite-difference operators by truncating the convolution series of the pseudospectral method. Various truncation windows can be employed for this purpose and they result in finite-difference operators with different dispersion properties. We found that there exists two families of scaled binomial windows that can be used to derive conventional finite-difference operators analytically. With a minor change, these scaled binomial windows can also be used to derive optimized finite-difference operators with enhanced dispersion properties. © 2012 Society of Exploration Geophysicists.

  5. Determination of finite-difference weights using scaled binomial windows

    KAUST Repository

    Chu, Chunlei

    2012-05-01

    The finite-difference method evaluates a derivative through a weighted summation of function values from neighboring grid nodes. Conventional finite-difference weights can be calculated either from Taylor series expansions or by Lagrange interpolation polynomials. The finite-difference method can be interpreted as a truncated convolutional counterpart of the pseudospectral method in the space domain. For this reason, we also can derive finite-difference operators by truncating the convolution series of the pseudospectral method. Various truncation windows can be employed for this purpose and they result in finite-difference operators with different dispersion properties. We found that there exists two families of scaled binomial windows that can be used to derive conventional finite-difference operators analytically. With a minor change, these scaled binomial windows can also be used to derive optimized finite-difference operators with enhanced dispersion properties. © 2012 Society of Exploration Geophysicists.

  6. Determination for regional differences of agriculture using satellite data

    Science.gov (United States)

    Saito, G.

    2006-12-01

    Remote Sensing Laboratory, Field Science Center, Graduate School of Agriculture Science, Tohoku University starts at April 2004. For studies and education at the laboratory we are now developing the system of remote sensing and GIS. Earth Remote Sensing Data Analysis Center (ERSDAC) made the Home Pages of Terra/ASTER Image Web Library 3 "The Major Airport of the World." http://www.Ersdac.or.jp/ASTERimage3/library_E.html. First, we check the Airport Data to use agricultural understanding for the world. Almost major airport is located in rural area and surrounded with agriculture field. To survey the agriculture field adjacent to the major airport has almost the same condition of human activities. The images are same size and display about 18km X 14km. We can easily understand field size and surrounding conditions. We study seven airports as follows, 1. Tokyo Narita Airport (NRT), Japan, 2. Taipei Chiang kai Shek International Airport (TPE), Taiwan, 3. Bangkok International Airport (BKK), Thailand, 4. Riyadh King Khalid International Airport (RUH), Saudi Arabia, 5. Charles de Gaulle Airport (CDG), Paris, France, 6. Vienna International Airport (VIE), Austria, 7. Denver International Airport (DEN), CO, USA. At the area of Tokyo Narita Airport, there are many golf courses, big urban area and small size of agricultural fields. At Taipei Airport area are almost same as Tokyo Narita Airport area and there are many ponds for irrigations. Bangkok Airport area also has golf courses and many ponds for irrigation water. Riyadh Airport area is quite different from others, and there are large bare soils and small agriculture fields with irrigation and circle shape. Paris Airport area and Vienna Airport area are almost agricultural fields and there are vegetated field and bare soil fields because of crop rotation. Denver Airport area consists of almost agriculture fields and each field size is very large. The advantages of ASTER data are as follows, 1. High-resolution and large

  7. Determination of the Drag Resistance Coefficients of Different Vehicles

    Science.gov (United States)

    Fahsl, Christoph; Vogt, Patrik

    2018-01-01

    While it has been demonstrated how air resistance could be analyzed by using mobile devices, this paper demonstrates a method of how to determine the drag resistance coefficient "c" of a commercial automobile by using the acceleration sensor of a smartphone or tablet. In an academic context, the drag resistance is often mentioned, but…

  8. Sex differences in adolescent depression: do sex hormones determine vulnerability?

    NARCIS (Netherlands)

    Naninck, E.F.G.; Lucassen, P.J.; Bakker, J.

    2011-01-01

    Depression is one of the most common, costly and severe psychopathologies worldwide. Its incidence, however, differs significantly between the sexes, and depression rates in women are twice those of men. Interestingly, this sex difference emerges during adolescence. Although the adolescent period is

  9. Companies’ investment determinants: comparison of different panel data estimators

    Directory of Open Access Journals (Sweden)

    Zelia Serrasqueiro

    2011-08-01

    Full Text Available In this study, Aivazian, Ge and Qiu’s (2005 analysis using static panel models is extended to using dynamic panel estimators, considering data for listed Portuguese companies. The results confirm Aivazian et al.’s (2005 conclusion that an ordinary Least Squares (OLS regression is not the best way to estimate the investment/determinant relationship. Investment decisions are probably dynamic, so the most suitable way to estimate the investment/determinant(s relationship is using dynamic panel estimators. Alternatively a fixed effect panel model can be used, consistent with a first order autocorrelation. In this way, firstly, it is possible to determine more accurately the positive impact of sales (Neo-classic theory and cash flow (Free Cash Flow theory on the investments of listed Portuguese companies. Secondly, the positive effect of growth opportunities (Agency theory is not overestimated when it seems to be the consequence of a first order autocorrelation. Using dynamic panel estimators permits correct measurement of dynamism in company investment decisions by examining the relationship between investment in the previous and the current periods.

  10. Determination of the drag resistance coefficients of different vehicles

    Science.gov (United States)

    Fahsl, Christoph; Vogt, Patrik

    2018-05-01

    While it has been demonstrated how air resistance could be analyzed by using mobile devices, this paper demonstrates a method of how to determine the drag resistance coefficient c of a commercial automobile by using the acceleration sensor of a smartphone or tablet. In an academic context, the drag resistance is often mentioned, but little attention is paid to quantitative measurements. This experiment was driven by the fact that this physical value is most certainly neglected because of its difficult measurability. In addition to that, this experiment gives insights on how the aerodynamic factor of an automobile affects the energy dissipation and thus how much power is required by automobile transportation.

  11. Theoretical determination of proton affinity differences in zeolites

    NARCIS (Netherlands)

    Kramer, G.J.; Santen, van R.A.

    1993-01-01

    An important factor in zeolite catalysis is the proton affinity, i.e., the energy required to remove a proton from the zeolite lattice. Differences in proton affinity are expected to influence the catalytic activity of acid sites, making the catalytically active sites inhomogeneous (within one

  12. Socioeconomic determinants of regional mortality differences in Europe

    NARCIS (Netherlands)

    Spijker, Jeroen Johannes Anthonius

    2004-01-01

    This thesis has attempted to assess the importance of various socioeconomic and other factors in mortality at the population level in three different settings: in Europe at the country level, and in the Czech Republic and the Netherlands at the regional level. Each analysis was conducted from a

  13. Generational Differences as a Determinant of Women's Perspectives on Commitment

    Science.gov (United States)

    Stark, Marcella D.; Kirk, Amy Manning; Bruhn, Rick

    2012-01-01

    Differences between 116 graduate and undergraduate women, representing 4 generations (i.e., Baby Boomers, Transitionals, Generation Xers, and Millennials), were studied to categorize earliest awareness and definitions of commitment in relationships. More than 63% of participants in each generation viewed relationship commitment in terms of…

  14. Sex differences in depression and anxiety disorders: potential biological determinants.

    Science.gov (United States)

    Altemus, Margaret

    2006-11-01

    The phenomenon of higher rates of affective disorders in women illustrates many of the difficulties as well as promises of translating preclinical models to human disorders. Abnormalities in the regulation of the hypothalamic-pituitary adrenal axis and the sympathoadrenomedullary system have been identified in depression and anxiety disorders, and these disorders are clearly precipitated and exacerbated by stress. Despite the striking sex difference in the prevalence of depression and anxiety disorders, attempts to identify corresponding sex differences in stress response reactivity in animal models have met with limited success. Processes which may contribute to increased rates of affective disorders in women are greater fluxes in reproductive hormones across the life span, and increased sensitivity to catecholamine augmentation of emotional memory consolidation.

  15. Residence time determination for adsorbent beds of different configurations

    Energy Technology Data Exchange (ETDEWEB)

    Otermat, J.E.; Wikoff, W.O.; Kovach, J.L.

    1995-02-01

    The residence time calculations of ASME AG-1 Code, Section FC, currently specify a screen surface area method, that is technically incorrect. Test data has been obtained on Type II adsorber trays of different configurations to establish residence time in the adsorber trays. These data indicate that the air volume/carbon volume ratio or the average screen area are more appropriate for the calculation of the residence time calculation than the currently used, smallest screen area basis.

  16. Are interest groups different in the factors determining landscape preferences?

    Directory of Open Access Journals (Sweden)

    Maria Bacher

    2016-02-01

    Full Text Available In the last decades, rural landscape in Europe has evolved from an agricultural by-product to an important public good. This development creates not only new challenges to farming practices, it also makes participation and public involvement an indispensable tool for sustainable landscape planning. This is especially true for many European mountain regions, where tourism represents an important source of income and conflicts between locals’ and tourists’ interests should be avoided. In our study, we analyze whether discrepancies in the perception of the Alpine landscape can be located between locals and tourists and, if these differences exist, in which aspects these two groups are differing. A model employing three general factors able to describe landscape preferences regardless of the personal background is suggested and validated by confirmatory factor analysis. Our major finding shows that an attractive landscape for tourists does not have to be contradictory to a landscape that supports a high living quality for locals. Compromises in landscape planning between locals’ and tourists’ requirements seem often not to be necessary as they, generally, do not differ in the way they experience and assess the landscape.

  17. Glucose determination in fish plasma by two different moderate methods

    Directory of Open Access Journals (Sweden)

    Jana Bartoňková

    2016-01-01

    Full Text Available Teleost fish include many different species, having a large economic and environmental impact. Glucose is a key source of energy for most vertebrate organisms. Fish as well as mammals maintain a specific level of blood sugar – glycaemia, which is influenced by multiple factors such as hormone production, diet, and temperature. Therefore, it is a useful indicator for scientists who need to check the immediate state of an organism. The most frequently used method of measuring glycaemia in farmed fish is spectrophotometry; however, this method is often inconvenient for field experiments. Here we report that basic spectrophotometry using oxidation of blood beta D-glucose by glucose oxidase (used in laboratory conditions can be easily substituted with portable glucometer measurements, primarily designed for human samples. The possibility of use outside the laboratory and its small sample volume demands make this method very useful. Field studies often require fast sample processing and conditions of measurement are limited. Using the glucometer is a simple and elegant option. We tested 74 blood plasma samples (29 males, 45 females of tench (Tinca tinca both spectrophotometrically and using the human glucometer. Our results show a significant linear correlation (P < 0.001 between both methods. The main contribution of this study consists in comparability and interchangeability of results obtained from both presented methods.

  18. Determinants of caesarean section in Lebanon: geographical differences.

    Science.gov (United States)

    Carayol, Marion; Zein, Ali; Ghosn, Nada; Du Mazaubrun, Christiane; Breart, Gérard

    2008-03-01

    This study, based on the Lebanese National Perinatal Survey which included 5231 women, examined the relations between the caesarean section (CS) rate and the characteristics of mothers, children, antenatal care and maternity units in two geographical zones of Lebanon (Beirut-Mount Lebanon and the rest of the country) and then looked at geographical variations. This analysis concerned 3846 women with singleton pregnancies and livebirths at low risk of CS, after exclusion of women with a previous CS, non-cephalic fetal presentations, or delivery before 37 weeks' gestation. The principal end point was caesarean delivery. The relations between the factors studied and CS were estimated by odds ratios (OR), both crude and adjusted, using logistic regression. The rate of CS was higher in the Beirut-Mount Lebanon zone than elsewhere (13.4% vs. 7.6%). After adjustment, several factors remained associated with caesarean delivery in each zone. Common factors were primiparity, gestational age > or = 41 weeks and antenatal hospitalisation. Factors identified only in the Beirut-Mount Lebanon zone were obstetric history and insurance coverage, whereas for the other zones we only found major risk factors for obstetric disease: maternal age > or = 35 years, number of antenatal consultations > or = 4 and birthweight Lebanon (OR = 1.80 [95% CI 1.09, 2.95]). In conclusion, the CS rates in Lebanon were high, with geographical differences that were associated with access to care and with obstetric practices.

  19. The determinants of excellent health: different from the determinants of ill-health?

    NARCIS (Netherlands)

    Mackenbach, J. P.; van den Bos, J.; Joung, I. M.; van de Mheen, H.; Stronks, K.

    1994-01-01

    In the famous definition of the World Health Organization, health is 'a state of complete physical, mental and social well-being, not merely the absence of disease or infirmity'. Until now, the distribution and determinants of the positive end of the health spectrum have not been studied

  20. Three Three-Axis IEPE Accelerometers on the Inner Liner of a Tire for Finding the Tire-Road Friction Potential Indicators.

    Science.gov (United States)

    Niskanen, Arto; Tuononen, Ari J

    2015-08-05

    Direct tire-road contact friction estimation is essential for future autonomous cars and active safety systems. Friction estimation methods have been proposed earlier for driving conditions in the presence of a slip angle or slip ratio. However, the estimation of the friction from a freely-rolling tire is still an unsolved topic. Knowing the existing friction potential would be beneficial since vehicle control systems could be adjusted before any remarkable tire force has been produced. Since accelerometers are well-known and robust, and thus a promising sensor type for intelligent tires, this study uses three three-axis IEPE accelerometers on the inner liner of a tire to detect friction potential indicators on two equally smooth surfaces with different friction levels. The equal roughness was chosen for both surfaces in order to study the friction phenomena by neglecting the effect of surface texture on vibrations. The acceleration data before the contact is used to differentiate the two friction levels between the tire and the road. In addition, the contact lengths from the three accelerometers are used to validate the acceleration data. A method to differentiate the friction levels on the basis of the acceleration signal is also introduced.

  1. Three Three-Axis IEPE Accelerometers on the Inner Liner of a Tire for Finding the Tire-Road Friction Potential Indicators

    Directory of Open Access Journals (Sweden)

    Arto Niskanen

    2015-08-01

    Full Text Available Direct tire-road contact friction estimation is essential for future autonomous cars and active safety systems. Friction estimation methods have been proposed earlier for driving conditions in the presence of a slip angle or slip ratio. However, the estimation of the friction from a freely-rolling tire is still an unsolved topic. Knowing the existing friction potential would be beneficial since vehicle control systems could be adjusted before any remarkable tire force has been produced. Since accelerometers are well-known and robust, and thus a promising sensor type for intelligent tires, this study uses three three-axis IEPE accelerometers on the inner liner of a tire to detect friction potential indicators on two equally smooth surfaces with different friction levels. The equal roughness was chosen for both surfaces in order to study the friction phenomena by neglecting the effect of surface texture on vibrations. The acceleration data before the contact is used to differentiate the two friction levels between the tire and the road. In addition, the contact lengths from the three accelerometers are used to validate the acceleration data. A method to differentiate the friction levels on the basis of the acceleration signal is also introduced.

  2. 34 CFR 300.306 - Determination of eligibility.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Determination of eligibility. 300.306 Section 300.306 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION... education and related services, an IEP must be developed for the child in accordance with §§ 300.320 through...

  3. Student Self-Determination: A Preliminary Investigation of the Role of Participation in Inclusive Settings

    Science.gov (United States)

    Hughes, Carolyn; Cosgriff, Joseph C.; Agran, Martin; Washington, Barbara H.

    2013-01-01

    Little is known about the effects of participation in inclusive settings on student self-determination. In this exploratory study, we examined the association between students' inclusive school and community activities and the self-determination skills of active involvement in IEP activities and use of selected self-determination strategies.…

  4. Determination of dose to patient in different teams of TC and assessment with international reference levels

    International Nuclear Information System (INIS)

    Ruiz Morales, C.; Fernandez lara, A. A.; Buades Forner, M. J.; Tobarra Gonzalez, B. M.

    2013-01-01

    The increase in CT studies and the differences observed between the different equipment used in our hospital prompted us to determine the doses to patients in different studies and check the results obtained with the reference values published internationally. (Author)

  5. Factors determining differences in biological effectiveness of ionizing radiations possessing different physical characteristics

    International Nuclear Information System (INIS)

    Korogodin, V.I.; Krasavin, E.A.

    1982-01-01

    Radiosensitivity of pro- and eukaryotes (D 0- 1 ) is considered with regard to the linear energy transfer (LET) of ionizing radiations. It was shown that radiosensitivity, as a function of LET, D 0- 1 (LET), is determined by not merely physical characteristics of radiations but also the ability of repair of DNA double strand breaks (DSB). The increase in the radiosensitivity of eukaryotes is connected with the decrease in the DSB repair when cells are exposed to densely ionizing particles. The decrease in DSB repair is apparently connected with the increment of straight DSB, comparing to enzymatic DSB, upon exposure to heavy ions. Potential mechanisms of D 0- 1 (LET) modifications for radiosensitive and superresistant mutants are discussed

  6. Effects of the CD-Rom Version of the "Self-Advocacy Strategy" on Quality of Contributions in IEP Meetings of High School Students with Intellectual Disability

    Science.gov (United States)

    Cease-Cook, Jennifer; Test, David W.; Scroggins, La' Shawndra

    2013-01-01

    This study used a multiple-probe across participants design to examine the effects of the CD-Rom version of the "Self-Advocacy Strategy" on quality of contributions in Individual Education Plan (IEP) meetings of five high school students with intellectual disability. Results indicated a functional relationship between using the CD-Rom…

  7. Creating a "Win-Win IEP" for Students with Autism: A How-To Manual for Parents and Educators. Second Edition.

    Science.gov (United States)

    Fouse, Beth

    This book is intended to provide parents of students with autism with necessary information for the Individualized Education Program (IEP) process and includes relevant information from the 1997 Individuals with Disabilities Education Act. Chapters discuss the following topics: (1) introductory information; (2) definitions of autism, the basic…

  8. Comparison of Transition-Related IEP Content for Young Adults with Disabilities Who Do or Do Not Have a Legal Guardian

    Science.gov (United States)

    Millar, Dorothy Squatrito

    2009-01-01

    IEP transition-related content was compared between young adults with developmental disabilities who had or did not have legal guardians. It was found that students with guardians were more likely to earn a certificate of completion, and wanted to remain living with their families, in comparison to students without guardians who were more likely…

  9. The Role of the School Nurse in the Special Education Process: Part 2: Eligibility Determination and the Individualized Education Program.

    Science.gov (United States)

    Shannon, Robin Adair; Yonkaitis, Catherine Falusi

    2017-07-01

    This is the second of two articles outlining the professional school nurse's role in the special education process for students with disabilities. The Individuals with Disabilities in Education Improvement Act of 2004 mandates the special education process: identification, full and individual evaluation, eligibility determination, and development of the individual education program (IEP), including special education placement. Part 1 focused on the importance of the school nurse's role in student identification, response to intervention, and the full and individual evaluation. Part 2 highlights the school nurse's vital and unique contribution to the subsequent special education steps of eligibility determination, IEP development, and special education services placement and minutes.

  10. Determination of efficiency curves for HPGE detector in different counting geometries

    International Nuclear Information System (INIS)

    Rodrigues, Josianne L.; Kastner, Geraldo F.; Ferreira, Andrea V.

    2011-01-01

    This paper presents the first experimental results related to determination of efficiency curves for HPGe detector in different counting geometries. The detector is a GX2520 Canberra belonging to CDTN/CNEN. Efficiency curves for punctual were determined by using a certified set of gamma sources. These curves were determined for three counting geometries. Following that, efficiency curves for non punctual samples were determined by using standard solutions of radionuclides in 500 ml and 1000 ml wash bottle Marinelli

  11. Physical Fitness Qualities of Professional Rugby League Football Players: Determination of Positional Differences.

    Science.gov (United States)

    Meir, Rudi; Newton, Robert; Curtis, Edgar; Fardell, Matthew; Butler, Benjamin

    2001-01-01

    Australian and English professional rugby players completed various physical fitness performance tests to determine differences when grouping players into three different rugby positional categories. Results found minimal differences in test scores on the basis of players' specific positions on a team, however, when players were grouped according…

  12. Different fits satisfy different needs: linking person-environment fit to employee commitment and performance using self-determination theory.

    Science.gov (United States)

    Greguras, Gary J; Diefendorff, James M

    2009-03-01

    Integrating and expanding upon the person-environment fit (PE fit) and the self-determination theory literatures, the authors hypothesized and tested a model in which the satisfaction of the psychological needs for autonomy, relatedness, and competence partially mediated the relations between different types of perceived PE fit (i.e., person-organization fit, person-group fit, and job demands-abilities fit) with employee affective organizational commitment and overall job performance. Data from 163 full-time working employees and their supervisors were collected across 3 time periods. Results indicate that different types of PE fit predicted different types of psychological need satisfaction and that psychological need satisfaction predicted affective commitment and performance. Further, person-organization fit and demands-abilities fit also evidenced direct effects on employee affective commitment. These results begin to explicate the processes through which different types of PE fit relate to employee attitudes and behaviors. (c) 2009 APA, all rights reserved.

  13. How active ingredient localisation in plant tissues determines the targeted pest spectrum of different chemistries

    DEFF Research Database (Denmark)

    Buchholz, Anke; Trapp, Stefan

    2016-01-01

    information sets revealed that the intracellular localisation of active ingredients determines the performance of test compounds against different target pests because of different feeding behaviours: mites feed on mesophyll, and aphids and whiteflies mostly in the vascular system. Polar compounds have a slow...

  14. Does Self-Determination Predict the School Engagement of Four Different Motivation Types in Adolescence?

    Science.gov (United States)

    Raufelder, Diana; Regner, Nicola; Drury, Kate; Eid, Michael

    2016-01-01

    In order to enhance our understanding of inter-individual differences in scholastic motivation, this study examined if self-determination predicts the school engagement of four different motivation types (MT) in a large sample of adolescent students (N = 1088) from Brandenburg, Germany: (1) peer-dependent MT, (2) teacher-dependent MT, (3)…

  15. determinant of psychophysiological state of sportsmen of high qualification with different emotional characteristics

    OpenAIRE

    Korobeynikova L.G.

    2011-01-01

    The purpose of the work - to study the determinants of psycho-physiological state of sportsmen of high qualification with different emotional characteristics. In experiment took part 19 highly skilled athletes involved in the Greco-Roman wrestling. The survey was carried out using a hardware-software complex psychodiagnostic "Multipsihometr-05. Determined by the emotional background of athletes according to the method A. Rukavishnikova features of visual perception and perceptual speed.

  16. determinant of psychophysiological state of sportsmen of high qualification with different emotional characteristics

    Directory of Open Access Journals (Sweden)

    Korobeynikova L.G.

    2011-04-01

    Full Text Available The purpose of the work - to study the determinants of psycho-physiological state of sportsmen of high qualification with different emotional characteristics. In experiment took part 19 highly skilled athletes involved in the Greco-Roman wrestling. The survey was carried out using a hardware-software complex psychodiagnostic "Multipsihometr-05. Determined by the emotional background of athletes according to the method A. Rukavishnikova features of visual perception and perceptual speed.

  17. Determinants influencing differences of financial statements under Vietnamese accounting and international accounting: The case of Vietnam

    Directory of Open Access Journals (Sweden)

    Duc Tai Do

    2018-06-01

    Full Text Available This research is conducted for evaluating the impact levels of determinants affecting the differences of financial statements of FDI firms under Vietnamese Accounting (VA and International Ac-counting (IAS/IFRS. Data were collected by conducting survey of FDI firms and audit firms for the period from 2015 to 2017. Based on the quantitative data, multiple regression was employed for showing the influence levels of determinants on the variable of differences of financial reports. The results show that seven determinants had positive relationships with the differences of financial statements prepared by FDI under Vietnamese accounting and IAS/IFRS. Based on the findings, some recommendations are given for reducing fee of conversion of financial statements from Vietnamese accounting to international accounting, increasing the comparability of financial statements and improving information quality of financial statements.

  18. The determinants of medical technology adoption in different decisional systems: A systematic literature review.

    Science.gov (United States)

    Varabyova, Yauheniya; Blankart, Carl Rudolf; Greer, Ann Lennarson; Schreyögg, Jonas

    2017-03-01

    Studies of determinants of adoption of new medical technology have failed to coalesce into coherent knowledge. A flaw obscuring strong patterns may be a common habit of treating a wide range of health care innovations as a generic technology. We postulate three decisional systems that apply to different medical technologies with distinctive expertise, interest, and authority: medical-individualistic, fiscal-managerial, and strategic-institutional decisional systems. This review aims to examine the determinants of the adoption of medical technologies based on the corresponding decision-making system. We included quantitative and qualitative studies that analyzed factors facilitating or inhibiting the adoption of medical technologies. In total, 65 studies published between 1974 and 2014 met our inclusion criteria. These studies contained 688 occurrences of variables that were used to examine the adoption decisions, and we subsequently condensed these variables to 62 determinants in four main categories: organizational, individual, environmental, and innovation-related. The determinants and their empirical association with adoption were grouped and analyzed by the three decision-making systems. Although we did not identify substantial differences across the decision-making systems in terms of the direction of the determinants' influence on adoption, a clear pattern emerged in terms of the categories of determinants that were targeted in different decision-making systems. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Determination of combinations of the attributes of sales promotion for different loyalty stages' customers

    OpenAIRE

    Pilelienė, Lina

    2010-01-01

    The peculiarities of the usage of sales promotion according to customer loyalty stage are being analyzed in the article. The main assumption here is that customers being on different loyalty stages have distinct needs and expectations with the sales promotion offerings. To be effective, sales promotion has to correspond to specific needs of a customer loyalty stage. On purpose to determine combination of attributes of sales promotion best suitable to customers being on different loyalty stage...

  20. The use of different techniques for determination of pitting corrosion potential of austenitic stainless steel

    International Nuclear Information System (INIS)

    Eskelinen, P.; Forsen, O.; Onnela, J.; Ylaesaari, S.; Haenninen, H.

    1992-01-01

    Three different techniques for pitting corrosion potential measurement on austenitic stainless steel (Fe18Cr10Ni) were compared: conventional polarization method, a new Avesta electrochemical corrosion measurement cell and a scratch technique. Special attention was paid to the effects of crevice corrosion during pitting corrosion potential measurement and to their elimination. Development of a rapid test technique for reliable pitting corrosion potential determination was aimed at and resulted from comparison of the different techniques

  1. Sensitive method for the determination of different S(IV) species in cloud and fog water.

    Science.gov (United States)

    Lammel, G

    1996-08-01

    Suppressed ion chromatography has been applied to the determination of S(IV) species in cloud and fog water in the range 0.012-2.4 mg S(IV)-S/L. The samples have been preserved prior to storage and S(IV) species have been determined as hydroxy methanesulfonate (HMS) together with the low molecular weight carboxylic acid anions, formate and acetate. Samples have been divided and treated differently such that total S(IV) as well as the non-oxidizable fraction of S(IV) (as given by the reactivity with H(2)O(2), added in surplus) could be determined. The difference between the two corresponds to the S(IV) fraction subjected to oxididation, which is of paramount interest in cloud and fogwater chemistry.

  2. Optimization and comparison of three different methods for the determination of Rn-222 in water

    International Nuclear Information System (INIS)

    Belloni, P.; Ingrao, G.; Cavaioli, M.; Notaro, M.; Torri, G.; Vasselli, R.; Mancini, C.; Santaroni, P.

    1995-01-01

    Three different systems for the determination of radon in water have been examined: liquid scintillation counting (LSC), degassification followed by Lucas cell counting (LCC) and gamma counting (GC). Particular care has been devoted to the sampling methodologies of the water. Comparative results for several environmental samples are given. A critical evaluation is also given on the basis of the final aim of the measurements

  3. QM/MM simulations identify the determinants of catalytic activity differences between type II dehydroquinase enzymes.

    Science.gov (United States)

    Lence, Emilio; van der Kamp, Marc W; González-Bello, Concepción; Mulholland, Adrian J

    2018-05-16

    Type II dehydroquinase enzymes (DHQ2), recognized targets for antibiotic drug discovery, show significantly different activities dependent on the species: DHQ2 from Mycobacterium tuberculosis (MtDHQ2) and Helicobacter pylori (HpDHQ2) show a 50-fold difference in catalytic efficiency. Revealing the determinants of this activity difference is important for our understanding of biological catalysis and further offers the potential to contribute to tailoring specificity in drug design. Molecular dynamics simulations using a quantum mechanics/molecular mechanics potential, with correlated ab initio single point corrections, identify and quantify the subtle determinants of the experimentally observed difference in efficiency. The rate-determining step involves the formation of an enolate intermediate: more efficient stabilization of the enolate and transition state of the key step in MtDHQ2, mainly by the essential residues Tyr24 and Arg19, makes it more efficient than HpDHQ2. Further, a water molecule, which is absent in MtDHQ2 but involved in generation of the catalytic Tyr22 tyrosinate in HpDHQ2, was found to destabilize both the transition state and the enolate intermediate. The quantification of the contribution of key residues and water molecules in the rate-determining step of the mechanism also leads to improved understanding of higher potencies and specificity of known inhibitors, which should aid ongoing inhibitor design.

  4. Quality Differences of Higher Education and Its Determinants in a Less-Developed Country

    Science.gov (United States)

    Sarmiento Espinel, Jaime Andrés; Silva Arias, Adriana Carolina; Van Gameren, Edwin

    2015-01-01

    Two key measures to determine the quality of higher education are the performance of students and the accreditation of a programme's quality. We analyse the difference in the distributions of the student's scores in a standardised test of economics knowledge between accredited and non-accredited undergraduate economics programmes in a…

  5. Determinants of educational participation and gender differences in education in six Arab countries

    NARCIS (Netherlands)

    Smits, J.P.J.M.; Huisman, A.H.M.

    2013-01-01

    We study the determinants of educational participation and gender differences in education for young children in six Arab countries: Algeria, Egypt, Morocco, Syria, Tunisia and Yemen. Although these countries have made much progress in getting young children into school, school dropout after age 11

  6. Determining minimally important score differences in scales of the Copenhagen Psychosocial Questionnaire

    DEFF Research Database (Denmark)

    Pejtersen, Jan Hyld; Bjorner, Jakob Bue; Hasle, Peter

    2010-01-01

    AIM: To determine minimally important differences (MIDs) for scales in the first version of the Copenhagen Psychosocial Questionnaire (COPSOQ). METHODS: Data were taken from two separate studies: a national population survey (N = 1062), and an intervention study at 14 workplaces (N = 1505). On th...

  7. Optimization and comparison of three different methods for the determination of Rn-222 in water

    Energy Technology Data Exchange (ETDEWEB)

    Belloni, P.; Ingrao, G. [ENEA CRE, Casaccia AMB-BIO, Roma (Italy); Cavaioli, M.; Notaro, M.; Torri, G.; Vasselli, R. [ANPA, National Environmental Protection Agency, DISP ARA MET, Roma (Italy); Mancini, C. [Nuclear Engineering Department, University `La Sapienza, Roma (Italy); Santaroni, P. [National Institute of Nutrition, Roma (Italy)

    1995-10-19

    Three different systems for the determination of radon in water have been examined: liquid scintillation counting (LSC), degassification followed by Lucas cell counting (LCC) and gamma counting (GC). Particular care has been devoted to the sampling methodologies of the water. Comparative results for several environmental samples are given. A critical evaluation is also given on the basis of the final aim of the measurements.

  8. Difference in Health Inequity between Two Population Groups due to a Social Determinant of Health

    Science.gov (United States)

    Moonesinghe, Ramal; Bouye, Karen; Penman-Aguilar, Ana

    2014-01-01

    The World Health Organization defines social determinants of health as “complex, integrated, and overlapping social structures and economic systems” that are responsible for most health inequities. Similar to the individual-level risk factors such as behavioral and biological risk factors that influence disease, we consider social determinants of health such as the distribution of income, wealth, influence and power as risk factors for risk of disease. We operationally define health inequity in a disease within a population due to a risk factor that is unfair and avoidable as the difference between the disease outcome with and without the risk factor in the population. We derive expressions for difference in health inequity between two populations due to a risk factor that is unfair and avoidable for a given disease. The difference in heath inequity between two population groups due to a risk factor increases with increasing difference in relative risks and the difference in prevalence of the risk factor in the two populations. The difference in health inequity could be larger than the difference in health outcomes between the two populations in some situations. Compared to health disparities which are typically measured and monitored using absolute or relative disparities of health outcomes, the methods presented in this manuscript provide a different, yet complementary, picture because they parse out the contributions of unfair and avoidable risk factors. PMID:25522048

  9. Synergistic cytotoxic effects of antibodies directed against different cell surface determinants

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, E V; Pindar, A; Stevenson, F K; Stevenson, G T [Southampton General Hospital (UK). Tenovus Research Lab.

    1978-03-01

    Three antibody populations were raised in rabbits against surface antigens on guinea-pig L/sub 2/C leukaemic lymphocytes: against idiotypic determinants on the lambda chain of the surface immunoglobulin, against C region determinants on the lambda chain, and against the surface antigens recognised by conventional anti-lymphocyte sera. Complement and K-cell cytotoxicities effected by the antibodies on L/sub 2/C cells were studied in vitro. In both cytotoxic systems mixtures of the antibodies revealed synergy, in that the titres of the mixtures exceeded predicted additive titres of their components. The synergy was greater when the mixed antibodies were directed to determinants on the same molecule rather than to determinants on different molecules.

  10. How AI localisation in plant tissues determines the targeted pest spectrum of different chemistries

    DEFF Research Database (Denmark)

    Buchholz, Anke; Trapp, Stefan

    penetration as first crucial step can be modified by formulation whereas the active ingredient (AI) distribution within cells is usually solely determined by physicochemical properties. This passive AI distribution was calculated with the Fick-Nernst-Planck equation implemented in a cell model....... The predictions were compared to the measured biological effects against three different arthropods. Test compounds differed in log P (-0.1 to 4.3) and pKa (4.1 to 10.7). Efficacies in different bioassays are discussed with the postulated cellular AI localisation and the individual feeding behaviour...

  11. ICP-AES Determination of Mineral Content in Boletus tomentipes Collected from Different Sites of China.

    Science.gov (United States)

    Wang, Xue-mei; Zhang, Ji; Li, Tao; Li, Jie-qing; Wang, Yuan-zhong; Liu, Hong-gao

    2015-05-01

    P, Na, Ca, Cu, Fe, Mg, Zn, As, Cd, Co, Cr and Ni, contents have been examined in caps and stipes of Boletus tomentipes collected from different sites of Yunnan province, southwest China. The elements were determined using inductively coupled plasma atomic emission spectroscopy (ICP-AES) with microwave digestion. P, Ca, Mg, Fe, Zn and Cu were the most abundant amongst elements determined in Boletus tomentipes. The caps were richer in P, Mg, Zn and Cd, and the stipes in Ca, Co and Ni. Cluster analysis showed a difference between Puer (BT7 and BT8) and other places. The PCA explained about 77% of the total variance, and the minerals differentiating these places were P (PC1) together with Ca, Cu, Fe, Mg, As and Ni, Na (PC2) together with Cd, and Zn (PC3). The results of this study imply that element concentrations of a mushroom are mutative when collected from the different bedrock soil geochemistry.

  12. Comparison of different methods for the determination of dynamic characteristics of low velocity anemometers

    DEFF Research Database (Denmark)

    Melikov, Arsen Krikor; Popiolek, Z.

    2004-01-01

    Three methods for determining the dynamic characteristics of low velocity thermal anemometers were compared. They were: step-up velocity change and step-down velocity change methods and a method based on sinusoidal type velocity fluctuations. Two low velocity thermal anemometers with omnidirectio......Three methods for determining the dynamic characteristics of low velocity thermal anemometers were compared. They were: step-up velocity change and step-down velocity change methods and a method based on sinusoidal type velocity fluctuations. Two low velocity thermal anemometers...... with omnidirectional velocity sensors were tested. The results identify differences in frequency response of low velocity anemometers determined by the three methods. The time constant and the response time determined by the step-up velocity change method and the step-down velocity change method may be substantially...... different and insufficient for describing the frequency response of all low velocity thermal anemometers. Therefore the upper frequency, determined in tests with sinusoidal velocity fluctuations, is recommended to be used in indoor climate standards as a single parameter describing the dynamic...

  13. Age determination by teeth examination: a comparison between different morphologic and quantitative analyses.

    Science.gov (United States)

    Amariti, M L; Restori, M; De Ferrari, F; Paganelli, C; Faglia, R; Legnani, G

    1999-06-01

    Age determination by teeth examination is one of the main means of determining personal identification. Current studies have suggested different techniques for determining the age of a subject by means of the analysis of microscopic and macroscopic structural modifications of the tooth with ageing. The histological approach is useful among the various methodologies utilized for this purpose. It is still unclear as to what is the best technique, as almost all the authors suggest the use of the approach they themselves have tested. In the present study, age determination by means of microscopic techniques has been based on the quantitative analysis of three parameters, all well recognized in specialized literature: 1. dentinal tubules density/sclerosis 2. tooth translucency 3. analysis of the cementum thickness. After a description of the three methodologies (with automatic image processing of the dentinal sclerosis utilizing an appropriate computer program developed by the authors) the results obtained on cases using the three different approaches are presented, and the merits and failings of each technique are identified with the intention of identifying the one offering the least degree of error in age determination.

  14. Determination of heavy metals in soil and different parts of Diplazium esculentum (medicinal fern)

    Science.gov (United States)

    Jasim, Hind S.; Idris, Mushrifah; Abdullah, Aminah; Kadhum, A. A. H.

    2014-09-01

    Diplazium esculentum is a widely used medicinal fern in Malaysia and other regions worldwide. Heavy metals in plants should be determined because prolonged human intake of toxic trace elements, even at low doses, results in organ malfunction and causes chronic toxicity. Hence, substantial information should be obtained from plants that grow on soils containing high concentrations of heavy metals. This study aimed to determine the physicochemical characteristics of soil and heavy metal concentrations (Pb, Cr, Mn, Cu, and Zn) in different parts of D. esculentum and soil, which were collected from the fern garden of Universiti Kebangsaan Malaysia. Results showed that heavy metals were highly accumulated in D. esculentum roots.

  15. Differential potentiometric titration: development of a methodology for determining the point of zero charge of metal (hydr)oxides by one titration curve.

    Science.gov (United States)

    Bourikas, Kyriakos; Kordulis, Christos; Lycourghiotis, Alexis

    2005-06-01

    A new methodology is presented, called differential potentiometric titration (DPT), which allows the determination of the point of zero charge (pzc) of metal (hydr)oxides using only one potentiometric curve. By performing extensive simulations of potentiometric titrations for various model (hydr)oxides, we found that an inflection point in a H+(cons,surf) versus pH potentiometric curve (H+(cons,surf): hydrogen ions consumed on the surface of the (hydr)oxide) and a peak in the corresponding differential curve, dH+(cons,surf)/dpH versus pH, appear at a pH equal to the pzc assumed for a model (hydr)oxide. This distinguishable peak appears at the same position irrespective of the surface ionization and the interfacial model adopted as well as the assumed ionic strength. It was found that the aforementioned peak also appears in the high-resolution differential potentiometric curves experimentally determined for four oxides (SiO2, TiO2, gamma-Al2O3, and MgO) that are widely used in various environmental and other technological applications. The application of DPT to the above-mentioned oxides provided practically the same pzc values as the corresponding ones achieved by using four different techniques as well as the corresponding isoelectric point (iep) values determined by microelectrophoresis. Differences between the pzc and iep values determined using various techniques in the case of MgO were attributed to the increasing dissolution of this oxide as pH decreases and the adsorption of cations (Mg2+, Na+) on the MgO/electrolytic solution interface.

  16. Determination of critical micelle concentration of cetyltrimethylammonium bromide: Different procedures for analysis of experimental data

    Directory of Open Access Journals (Sweden)

    Goronja Jelena M.

    2016-01-01

    Full Text Available Conductivity of two micellar systems was measured in order to determine critical micelle concentration (CMC of cetyltrimethylammonium bromide (CTAB. Those systems were: CTin water and CTin binary mixture acetonitrile (ACN-water. Conductivity (κ-concentration (c data were treated by four different methods: conventional method, differential methods (first and second derivative and method of integration (methods A-D, respectively. As CTin water micellar system shows a sharp transition between premicellar and postmicellar part of the κ/c curve, any of the applied methods gives reliable CMC values and there is no statistically significant difference between them. However, for CTin ACN-water mixture micellar system the integration method for CMC determination is recommended due to a weak curvature of κ/c plot.

  17. Regional differences in brain glucose metabolism determined by imaging mass spectrometry

    OpenAIRE

    André Kleinridders; Heather A. Ferris; Michelle L. Reyzer; Michaela Rath; Marion Soto; M. Lisa Manier; Jeffrey Spraggins; Zhihong Yang; Robert C. Stanton; Richard M. Caprioli; C. Ronald Kahn

    2018-01-01

    Objective: Glucose is the major energy substrate of the brain and crucial for normal brain function. In diabetes, the brain is subject to episodes of hypo- and hyperglycemia resulting in acute outcomes ranging from confusion to seizures, while chronic metabolic dysregulation puts patients at increased risk for depression and Alzheimer's disease. In the present study, we aimed to determine how glucose is metabolized in different regions of the brain using imaging mass spectrometry (IMS). Metho...

  18. Determination of permeability coefficients of ophthalmic drugs through different layers of porcine, rabbit and bovine eyes

    OpenAIRE

    Nagel, Stefan; Guthoff, Rudolf F.; Weitschies, Werner; Seidlitz, Anne; Kristl, Albin; Žakelj, Simon; Loch, Christian

    2015-01-01

    To treat ophthalmic diseases like glaucoma or inflammatory disorders topically applied ophthalmic formulations such as eye drops are usually used. In addition, novel ophthalmic implants releasing drug substances locally into different parts of the eye are available today. In the work presented here, the permeability coefficients of selected drugs (ciprofloxacin hydrochloride, lidocaine hydrochloride, timolol maleate) for ophthalmic tissues were determined using side-by-side diffusion chambers...

  19. Determination of fossil carbon content in Swedish waste fuel by four different methods.

    Science.gov (United States)

    Jones, Frida C; Blomqvist, Evalena W; Bisaillon, Mattias; Lindberg, Daniel K; Hupa, Mikko

    2013-10-01

    This study aimed to determine the content of fossil carbon in waste combusted in Sweden by using four different methods at seven geographically spread combustion plants. In total, the measurement campaign included 42 solid samples, 21 flue gas samples, 3 sorting analyses and 2 investigations using the balance method. The fossil carbon content in the solid samples and in the flue gas samples was determined using (14)C-analysis. From the analyses it was concluded that about a third of the carbon in mixed Swedish waste (municipal solid waste and industrial waste collected at Swedish industry sites) is fossil. The two other methods (the balance method and calculations from sorting analyses), based on assumptions and calculations, gave similar results in the plants in which they were used. Furthermore, the results indicate that the difference between samples containing as much as 80% industrial waste and samples consisting of solely municipal solid waste was not as large as expected. Besides investigating the fossil content of the waste, the project was also established to investigate the usability of various methods. However, it is difficult to directly compare the different methods used in this project because besides the estimation of emitted fossil carbon the methods provide other information, which is valuable to the plant owner. Therefore, the choice of method can also be controlled by factors other than direct determination of the fossil fuel emissions when considering implementation in the combustion plants.

  20. Determination of Slake Durability Index (Sdi) Values on Different Shape of Laminated Marl Samples

    Science.gov (United States)

    Ankara, Hüseyin; Çiçek, Fatma; Talha Deniz, İsmail; Uçak, Emre; Yerel Kandemir, Süheyla

    2016-10-01

    The slake durability index (SDI) test is widely used to determine the disintegration characteristic of the weak and clay-bearing rocks in geo-engineering problems. However, due to the different shapes of sample pieces, such as, irregular shapes displayed mechanical breakages in the slaking process, the SDI test has some limitations that affect the index values. In addition, shape and surface roughness of laminated marl samples have a severe influence on the SDI. In this study, a new sample preparation method called Pasha Method was used to prepare spherical specimens from the laminated marl collected from Seyitomer collar (SLI). Moreover the SDI tests were performed on equal size and weight specimens: three sets with different shapes were used. The three different sets were prepared as the test samples which had sphere shape, parallel to the layers in irregular shape, and vertical to the layers in irregular shape. Index values were determined for the three different sets subjected to the SDI test for 4 cycles. The index values at the end of fourth cycle were found to be 98.43, 98.39 and 97.20 %, respectively. As seen, the index values of the sphere sample set were found to be higher than irregular sample sets.

  1. Determining

    Directory of Open Access Journals (Sweden)

    Bahram Andarzian

    2015-06-01

    Full Text Available Wheat production in the south of Khuzestan, Iran is constrained by heat stress for late sowing dates. For optimization of yield, sowing at the appropriate time to fit the cultivar maturity length and growing season is critical. Crop models could be used to determine optimum sowing window for a locality. The objectives of this study were to evaluate the Cropping System Model (CSM-CERES-Wheat for its ability to simulate growth, development, grain yield of wheat in the tropical regions of Iran, and to study the impact of different sowing dates on wheat performance. The genetic coefficients of cultivar Chamran were calibrated for the CSM-CERES-Wheat model and crop model performance was evaluated with experimental data. Wheat cultivar Chamran was sown on different dates, ranging from 5 November to 9 January during 5 years of field experiments that were conducted in the Khuzestan province, Iran, under full and deficit irrigation conditions. The model was run for 8 sowing dates starting on 25 October and repeated every 10 days until 5 January using long-term historical weather data from the Ahvaz, Behbehan, Dezful and Izeh locations. The seasonal analysis program of DSSAT was used to determine the optimum sowing window for different locations as well. Evaluation with the experimental data showed that performance of the model was reasonable as indicated by fairly accurate simulation of crop phenology, biomass accumulation and grain yield against measured data. The normalized RMSE were 3%, 2%, 11.8%, and 3.4% for anthesis date, maturity date, grain yield and biomass, respectively. Optimum sowing window was different among locations. It was opened and closed on 5 November and 5 December for Ahvaz; 5 November and 15 December for Behbehan and Dezful;and 1 November and 15 December for Izeh, respectively. CERES-Wheat model could be used as a tool to evaluate the effect of sowing date on wheat performance in Khuzestan conditions. Further model evaluations

  2. Determinant Factors of Physical Performance and Specific Throwing in Handball Players of Different Ages.

    Science.gov (United States)

    Ortega-Becerra, Manuel; Pareja-Blanco, Fernando; Jiménez-Reyes, Pedro; Cuadrado-Peñafiel, Víctor; González-Badillo, Juan J

    2018-06-01

    Ortega-Becerra, M, Pareja-Blanco, F, Jiménez-Reyes, P, Cuadrado-Peñafiel, V, and González-Badillo, JJ. Determinant factors of physical performance and specific throwing in handball players of different ages. J Strength Cond Res 32(6): 1778-1786, 2018-This study aimed to analyze various fitness qualities in handball players of different ages and to determine the relationships between these parameters and throwing velocity. A total of 44 handball players participated, pooled by age groups: professional (ELITE, n = 13); under-18 (U18, n = 16); under-16 (U16, n = 15). The following tests were completed: 20-m running sprints; countermovement jumps (CMJs); jump squat to determine the load that elicited ∼20 cm jump height (JSLOAD-20 cm); a progressive loading test in full squat and bench press to determine the load that elicited ∼1 m·s (SQ-V1-LOAD and BP-V1-LOAD); and handball throwing (jump throw and 3-step throw). ELITE showed greater performance in almost all sprint distances, CMJ, JSLOAD-20 cm, and bench press strength than U18 and U16. The differences between U18 and U16 were unclear for these variables. ELITE also showed greater (p handball throwing velocity is strongly associated with lower-limb strength, although upper-limb strength, jumping and sprint capacities also play a relevant role in throwing performance, suggesting the need for coaches to include proper strength programs to improve handball players' throwing velocity.

  3. Various electroanalytical methods for the determination of uranium in different matrices

    Directory of Open Access Journals (Sweden)

    Alankar Shrivastava

    2013-06-01

    Full Text Available Uranium is a toxic material hence numerous body systems such as the kidney, brain, liver, and heart can be affected by uranium exposure. The main effect is kidney toxicity. Uranium is a naturally occurring element found in low levels in all rock, soil, and water. All uranium isotopes may also cause radiation hazards, thus without any doubt an analysis of such materials in the surrounding environment is very important. The presented review is a summarization of all electroanalytical techniques for the determination of uranium and its compounds in various matrices. Totally 43 different methods are found in our literature survey. Out of these three are polarographic, 25 potentiometry, five capillary electrophoresis and 28 voltametric methods are available in the literature. Interferences of different ions and applications in different matrices are also given for each method.

  4. [Determination of inorganic elements in different parts of Sonchus oleraceus L by flame atomic absorption spectrometry].

    Science.gov (United States)

    Wang, Nai-Xing; Cui, Xue-Gui; Du, Ai-Qin; Mao, Hong-Zhi

    2007-06-01

    Flame atomic absorption spectrometry with air-acetylene flame was used for the determination of inorganic metal elements in different parts ( flower, leaf, stem and root) of Sonchus oleraceus L. The contents of Ca, Mg, K, Na, Fe, Mn, Cu, Zn, Cr, Co, Ni, Pb and Cd in the flower, leaf, stem and root of Sonchus oleraceus L were compared. The order from high to low of the additive weight (microg x g(-1)) for the 13 kinds of metal elements is as follows: leaf (77 213.72) > flower (47 927.15) > stem(42 280.99) > root (28 131.18). From the experimental results it was found that there were considerable differences in the contents of the metal elements in different parts, and there were richer contents of Fe, Zn, Mn and Cu in root and flower, which are necessary to human health, than in other parts.

  5. Parameters of quality of the woodworkability for determination of different usage of Eucalyptus wood

    Directory of Open Access Journals (Sweden)

    José Reinaldo Moreira da Silva

    2009-03-01

    Full Text Available Wood products used in the furniture industry need to have wood work machine surfaces quality optimized andpatronized. There are some classification methods to determine the wood quality, including visual inspection, determination of theadvance per tooth (fz, rugosimeter and laser or just touching. After the wood classification it is determined the usage of the differentwood qualities. The empiricism of the quality parameters in the indication of uses is not always ideal. This study determined the qualityof surfaces of Eucalyptus flat wood and defined appropriate uses for the different quality classes obtained. It had been worked machinedifferent Eucalyptus samples by planer with speed of advance of 3,6,15 and 30 m*min-1. To classify the wood, the determination of theadvance per tooth (calculated fz and measured fz and the visual qualification (ASTMD 1666-87, 1995 were used. Later the woodusage according to quality was determined. The percentage of good samples decreased as the speed advance increased: reaching92%, 69%, 0% and 0% for advance speed of 3,6,15 and 30 m*min-1 respectively. Samples prepared at the speed of 3 and 6 m*min-1 were used to fabricate furniture, cabinet frame and thresholds. About 54%of samples prepared at the speed of 15 m*min-1 were usedfor railing, lambris, structural panels and flooring. About 46% and 100% of samples prepared at the speed of 15 and 30 m*min-1,respectively, were used to fabricate dividers, trusses, fences and, or, exterior gates.

  6. Preparation of gold nanoparticles and determination of their particles size via different methods

    Energy Technology Data Exchange (ETDEWEB)

    Iqbal, Muhammad; Usanase, Gisele [University of Lyon, University Lyon-1, CNRS, UMR-5007, LAGEP, F-69622 Villeurbanne (France); Oulmi, Kafia; Aberkane, Fairouz; Bendaikha, Tahar [Laboratory of Chemistry and Environmental Chemistry(LCCE), Faculty of Science, Material Science Department, University of Batna, 05000 (Algeria); Fessi, Hatem [University of Lyon, University Lyon-1, CNRS, UMR-5007, LAGEP, F-69622 Villeurbanne (France); Zine, Nadia [Institut des Sciences Analytiques (ISA), Université Lyon, Université Claude Bernard Lyon-1, UMR-5180, 5 rue de la Doua, F-69100 Villeurbanne (France); Agusti, Géraldine [University of Lyon, University Lyon-1, CNRS, UMR-5007, LAGEP, F-69622 Villeurbanne (France); Errachid, El-Salhi [Institut des Sciences Analytiques (ISA), Université Lyon, Université Claude Bernard Lyon-1, UMR-5180, 5 rue de la Doua, F-69100 Villeurbanne (France); Elaissari, Abdelhamid, E-mail: elaissari@lagep.univ-lyon1.fr [University of Lyon, University Lyon-1, CNRS, UMR-5007, LAGEP, F-69622 Villeurbanne (France)

    2016-07-15

    Graphical abstract: Preparation of gold nanoparticles via NaBH{sub 4} reduction method, and determination of their particle size, size distribution and morphology by using different techniques. - Highlights: • Gold nanoparticles were synthesized by NaBH{sub 4} reduction method. • Excess of reducing agent leads to tendency of aggregation. • The particle size, size distribution and morphology were investigated. • Particle size was determined both experimentally as well as theoretically. - Abstract: Gold nanoparticles have been used in various applications covering both electronics, biosensors, in vivo biomedical imaging and in vitro biomedical diagnosis. As a general requirement, gold nanoparticles should be prepared in large scale, easy to be functionalized by chemical compound of by specific ligands or biomolecules. In this study, gold nanoparticles were prepared by using different concentrations of reducing agent (NaBH{sub 4}) in various formulations and their effect on the particle size, size distribution and morphology was investigated. Moreover, special attention has been dedicated to comparison of particles size measured by various techniques, such as, light scattering, transmission electron microscopy, UV spectrum using standard curve and particles size calculated by using Mie theory and UV spectrum of gold nanoparticles dispersion. Particle size determined by various techniques can be correlated for monodispersed particles and excess of reducing agent leads to increase in the particle size.

  7. Determination of Critical Parameters of Carbon Dioxide+ Butyraldehyde System with Different Compositions

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jing-chang; GAO Xi-xin; CAO Wei-liang

    2005-01-01

    Supercritical carbon dioxide( SC-CO2 ) is considered in green chemistry as a substitute for conventional solvents in chemical reactions due to its environmentally benign character. Recently we have reported the homogeneous hydroformylation of propylene in supercritical carbon dioxide( SC-CO2 ), which is an example of this kind of application of carbon dioxide. The determination for the critical parameters of carbon dioxide + butyraldehyde mixtures is necessary for this reaction design which is the focus of the present paper. The critical parameters of the binary systems were determined via the static visual method at a constant volume with the molar fraction of butyraldehyde ranging from 1.0%to 2. 2% and the pressure ranging from 5 to 10 MPa. The experimental results show that the critical pressure and temperature increased with increasing the molar fraction of butyraldehyde. The bubble(dew) temperatures and the bubble (dew) pressures for the binary systems were also determined experimentally. The p-T Figures at different compositions of the binary systems were described. In addition, the critical compressibility factors Zc of the binary systems at different concentrations of n-butyraldehyde were calculated. It was found that the critical compressibility factor values of the binary systems decreased with increasing the molar fraction of n-butyraldehyde in the experimental range.

  8. Neutron activation determination of gold in technogenic raw materials with different mineral composition

    Directory of Open Access Journals (Sweden)

    Yudakov Aleksandr A.

    2015-01-01

    Full Text Available The methods used to determine the gold content in the technogenic objects of gold mining were analyzed regarding their non-homogeneity and complexity of chemical and mineral compositions. A possible application of the neutron activation analysis with the use of the californium source of neutrons for determining the content of fine-grained and extra-fine-grained gold in the technogenic objects, including the bottom-ash waste of energy providers, is considered. It was demonstrated that the chemical composition of the sample affects the neuron flux distribution in the sample, which can essentially distort the results of the neutron activation analysis. In order to eliminate possible systematic errors investigations of the effect of the sample mineral composition on the results of the gold determination using the neutron activation analysis were carried out. Namely, a large mass of rock (3-5 kg was loaded into an activation zone using four matrix types such as silicate, carbon-containing, iron-containing, and titanium magnetite. It was shown that there wereno significant difference between the dispersal of the fluxes of thermal and resonance neutrons emitted from 252Cf during activation of the gold-containing technogenic samples with different mineral compositions.

  9. Preparation of gold nanoparticles and determination of their particles size via different methods

    International Nuclear Information System (INIS)

    Iqbal, Muhammad; Usanase, Gisele; Oulmi, Kafia; Aberkane, Fairouz; Bendaikha, Tahar; Fessi, Hatem; Zine, Nadia; Agusti, Géraldine; Errachid, El-Salhi; Elaissari, Abdelhamid

    2016-01-01

    Graphical abstract: Preparation of gold nanoparticles via NaBH_4 reduction method, and determination of their particle size, size distribution and morphology by using different techniques. - Highlights: • Gold nanoparticles were synthesized by NaBH_4 reduction method. • Excess of reducing agent leads to tendency of aggregation. • The particle size, size distribution and morphology were investigated. • Particle size was determined both experimentally as well as theoretically. - Abstract: Gold nanoparticles have been used in various applications covering both electronics, biosensors, in vivo biomedical imaging and in vitro biomedical diagnosis. As a general requirement, gold nanoparticles should be prepared in large scale, easy to be functionalized by chemical compound of by specific ligands or biomolecules. In this study, gold nanoparticles were prepared by using different concentrations of reducing agent (NaBH_4) in various formulations and their effect on the particle size, size distribution and morphology was investigated. Moreover, special attention has been dedicated to comparison of particles size measured by various techniques, such as, light scattering, transmission electron microscopy, UV spectrum using standard curve and particles size calculated by using Mie theory and UV spectrum of gold nanoparticles dispersion. Particle size determined by various techniques can be correlated for monodispersed particles and excess of reducing agent leads to increase in the particle size.

  10. Determinants of utilisation differences for cancer medicines in Belgium, Scotland and Sweden.

    Science.gov (United States)

    Ferrario, Alessandra

    2017-12-01

    Little comparative evidence is available on utilisation of cancer medicines in different countries and its determinants. The aim of this study was to develop a statistical model to test the correlation between utilisation and possible determinants in selected European countries. A sample of 31 medicines for cancer treatment that obtained EU-wide marketing authorisation between 2000 and 2012 was selected. Annual data on medicines' utilisation covering the in- and out-patient public sectors were obtained from national authorities between 2008 and 2013. Possible determinants of utilisation were extracted from HTA reports and complemented by contacts with key informants. A longitudinal mixed effect model was fitted to test possible determinants of medicines utilisation in Belgium, Scotland and Sweden. In the all-country model, the number of indications reimbursed positively correlated with increased consumption of medicines [one indication 2.6, 95% CI (1.8-3.6); two indications 2.4, 95% CI (1.4-4.3); three indications 4.9, 95% CI (2.2-10.9); all P marketing authorisation [1.2, 95% CI (1.02-1.4); p marketing authorisation. Prices had a negative effect on consumption in Belgium and Sweden. The positive impact of financial MEAs in Scotland suggests that the latter may remove the regressive effect of list prices on consumption.

  11. A comparison of Probability Of Detection (POD) data determined using different statistical methods

    Science.gov (United States)

    Fahr, A.; Forsyth, D.; Bullock, M.

    1993-12-01

    Different statistical methods have been suggested for determining probability of detection (POD) data for nondestructive inspection (NDI) techniques. A comparative assessment of various methods of determining POD was conducted using results of three NDI methods obtained by inspecting actual aircraft engine compressor disks which contained service induced cracks. The study found that the POD and 95 percent confidence curves as a function of crack size as well as the 90/95 percent crack length vary depending on the statistical method used and the type of data. The distribution function as well as the parameter estimation procedure used for determining POD and the confidence bound must be included when referencing information such as the 90/95 percent crack length. The POD curves and confidence bounds determined using the range interval method are very dependent on information that is not from the inspection data. The maximum likelihood estimators (MLE) method does not require such information and the POD results are more reasonable. The log-logistic function appears to model POD of hit/miss data relatively well and is easy to implement. The log-normal distribution using MLE provides more realistic POD results and is the preferred method. Although it is more complicated and slower to calculate, it can be implemented on a common spreadsheet program.

  12. Levels of trace elements in different varieties of wheat determined by Atomic Absorption Spectroscopy

    International Nuclear Information System (INIS)

    Mohamed, A.E.; Taha, G.M.

    2003-01-01

    Trace elements Ag, Au, Ca, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Sr and Zn were determined in six wheat samples purchased from the open market in different localities (Egypt, Saudi Arabia, Yemen, Oman, Dubai and Australia). The dried powdered samples were decomposed in HNO3-HClO4 acids mixtures and elements were determined using recording atomic absorption spectrophotometer. The results were within the safety baseline of all the assayed elements. Certified biological standards, Brown's Kale (BK), Orchard Leaves (OL) and tomato leaves (TOML) were used to assure the accuracy of results. However, Co, Pb and Sr were absent from samples except the Egyptian samples. The obtained databases were statistically treated. Several significant and strong positive correlation coefficients (r=0.506-1.00) between the groups of elements were observed. On the other hand, strong negative correlations (r=0.492-0.873) between another group of elements were also shown. (author)

  13. Determination of toxic metals in different brand of chocolates and candies, marketed in Pakistan

    International Nuclear Information System (INIS)

    Jalbani, N.; Kazi, T.G.; Afridi, H.I.; Arain, M.B.

    2009-01-01

    In present study three toxic metals, cadmium (Cd), nickel (Ni) and lead (Pb) were determined in chocolates and candy samples available in local markets of Hyderabad, Pakistan. Concentrations of understudy toxic metals (TMs) were determined by electro thermal atomic absorption spectrometry (ETAAS) prior to microwave assisted acid digestion. Validation of the methodology was performed by standard addition method and conventional acid digestion on electric hot plate to obtained TMs concentration, for comparative purpose to obtain results within the 95% confidence level. No significant differences were observed for TMs obtained from both methods (P 0.05). The concentration of Cd, Ni and Pb were observed in chocolates and candy samples is ranged as of 0.099 - 0.353, 1.45 - 4.33 and 1.11 - 2.48 mu g/g, respectively. The results indicated that cocoa-based chocolates have higher contents of TMs than milk- based chocolates and candies. (author)

  14. Determination of 90Sr Abundance in Different Kind of Pasture at PPTN Serpong

    International Nuclear Information System (INIS)

    Sudiyati; Murdahayu Makmur; Agus Gindo S

    2007-01-01

    The determination of 90 Sr abundance in the pasture grass around Serpong had been done. The aim of the research is to determine 90 Sr abundance in the pasture which could be used to estimate the dose received by human in food chain pathways. The mean of 90 Sr mean activities in pasture around PPTN Serpong is 14.14 ± 3.7 mBq/kg, this result is insignificantly different compared to its control (off-site), i.e. 14.18 ± 6.9 mBq/kg. Elephant grass (Penisettum Purpureum) has the highest abundance of 90 Sr which is 24.8 ± 15.6 mBq/kg, followed by teki grass (Setaria Spha Celata) and ilalang grass (Imperata Cylinrica) which are 14.9 ± 6.0 mBq/kg and 8.0 ± 4.8 mBq/kg, respectively. (author)

  15. Determination of Distribution and Properties of Soil Formed on Different Fluvial Deposit

    Directory of Open Access Journals (Sweden)

    Orhan DENGİZ

    2014-03-01

    Full Text Available Alluvial land, formed on accumulated sediment depositions by time, show large variety in their properties at short distances. Therefore, different soils can be form on these lands. The objective of this research was to determine, mapping and classify different soils formed on fluvial land used for intensive cultivation in Örencik village of Samsun Bafra district. Total study area is approximately 407.9 ha. Average annual temperature and precipitation are 13.6 oC and 764.3 mm, respectively. After examination of topographic, land use, geologic and geomorphologic maps and land observation, 9 profile places were excavated in study area. Detailed land observations were done with grid method and auger examinations. The soil samples were taken from each profile and their analyses were done in the laboratory. By assessing the results of analyses and field studies, 7 different soil series were determined and described. Three of them were classified as Entisol due to their young age, three of them were classified as Inceptisol and one is as Vertisol. Whereas Cevizlik series has the largest area (24.7%, Elmacıdede series has the smallest area in the study area (7.8%.

  16. APPLICATION OF ALLOMETRY FOR DETERMINATION OF STRENGTH PROFILE IN YOUNG FEMALE ATHLETES FROM DIFFERENT SPORTS

    Directory of Open Access Journals (Sweden)

    J. Gajewski

    2011-11-01

    Full Text Available The goal of the study was to determine a strength profile in young female athletes practising different sports and to use allometry to evaluate muscular strength with respect to body mass. The study included 42 women who practised taekwondo (n = 10, weightlifting (n = 10, canoeing (n = 14 and speed skating (n = 8. Measurements of maximal muscle torques under static conditions in 10 groups of flexors and extensors of the elbow, shoulder, hip, knee and trunk were carried out. The MANCOVA procedure was employed to compare means between the groups. A logarithm of body mass was adopted as a covariate. Relationships between body mass and muscle torques in each muscle group were determined using a procedure of linear regression. The analysis of residuals was employed for the evaluation of maximal muscle torques. Mean values of logarithms of maximal muscle torques were significantly different for the representatives of individual sports and they depended on the logarithm of body mass. It was proposed to use a mean of residuals normalized for individual muscle groups as a synthetic strength index (mean of the strength profile. The women practising canoeing were characterized by the highest strength index. Its lowest values were obtained by weightlifting and taekwondo athletes. Differences in strength profiles in the tested athletes were attributed to the specific nature of their sports. It is suggested to use an allometric relationship scaled by body mass for strength assessment.

  17. Low degree Earth's gravity coefficients determined from different space geodetic observations and climate models

    Science.gov (United States)

    Wińska, Małgorzata; Nastula, Jolanta

    2017-04-01

    Large scale mass redistribution and its transport within the Earth system causes changes in the Earth's rotation in space, gravity field and Earth's ellipsoid shape. These changes are observed in the ΔC21, ΔS21, and ΔC20 spherical harmonics gravity coefficients, which are proportional to the mass load-induced Earth rotational excitations. In this study, linear trend, decadal, inter-annual, and seasonal variations of low degree spherical harmonics coefficients of Earth's gravity field, determined from different space geodetic techniques, Gravity Recovery and Climate Experiment (GRACE), satellite laser ranging (SLR), Global Navigation Satellite System (GNSS), Earth rotation, and climate models, are examined. In this way, the contribution of each measurement technique to interpreting the low degree surface mass density of the Earth is shown. Especially, we evaluate an usefulness of several climate models from the Coupled Model Intercomparison Project phase 5 (CMIP5) to determine the low degree Earth's gravity coefficients using GRACE satellite observations. To do that, Terrestrial Water Storage (TWS) changes from several CMIP5 climate models are determined and then these simulated data are compared with the GRACE observations. Spherical harmonics ΔC21, ΔS21, and ΔC20 changes are calculated as the sum of atmosphere and ocean mass effect (GAC values) taken from GRACE and a land surface hydrological estimate from the selected CMIP5 climate models. Low degree Stokes coefficients of the surface mass density determined from GRACE, SLR, GNSS, Earth rotation measurements and climate models are compared to each other in order to assess their consistency. The comparison is done by using different types of statistical and signal processing methods.

  18. Socio-demographic characteristics as determinants of differences in perception of local gastronomy

    Directory of Open Access Journals (Sweden)

    Vuksanović Nikola

    2017-01-01

    Full Text Available This study aims to research differences in socio-demographic characteristics of foreign tourists in consumption of local food in the city centres Belgrade and Novi Sad, Republic of Serbia. The research was conducted on a sample of 673 respondents. The results of this study point out the importance of socio-demographic variables in research of local gastronomy as a significant component of tourism product. The research included the determining of the impact of the city the tourists stayed at. The differences were examined via two-factor ANOVA analysis of variance. The obtained results indicate that there are differences between age groups, in the level of education, monthly income and countries that foreign tourists come from, whereas there is no difference between genders in relation to the perception of local gastronomy. At the same time, the findings indicate that there are no differences in the perception of local gastronomy between the cities of Novi Sad and Belgrade. The results confirm previous studies and point out the significance of socio-demographic characteristics of foreign tourists in their perception of local gastronomy and adapting it to the visitors, regardless of the city they visited.

  19. Erythrocyte phosphofructokinase in rat strains with genetically determined differences in 2,3-diphosphoglycerate levels.

    Science.gov (United States)

    Noble, N A; Tanaka, K R

    1981-02-01

    We have studied the erythrocyte enzyme phosphofructokinase (PFK) from two strains of Long-Evans rats with genetically determined differences in erythrocyte 2,3-diphosphoglycerate (DPG) levels. The DPG difference is due to two alleles at one locus. With one probable exception, the genotype at this locus is always associated with the hemoglobin (Hb) electrophoretic phenotype, due to a polymorphism at the III beta-globin locus. The enzyme PFK has been implicated in the DPG difference because glycolytic intermediate levels suggest that this enzyme has a higher in vivo activity in High-DPG strain rats, although the total PFK activity does not differ. We report here that partially purified erythrocyte PFK from Low-DPG strain cells is inhibited significantly more at physiological levels of DPG (P less than 0.01) than PFK from High-DPG strain erythrocytes. Citrate and adenosine triphosphate also inhibit the Low-DPG enzyme more than the High-DPG enzyme. Therefore, a structurally different PFK, with a greater sensitivity to inhibitors, may explain the lower DPG and ATP levels observed in Low-DPG strain animals. These data support a two-locus (Hb and PFK) hypothesis and provide a gene marker to study the underlying genetic and physiologic relationships of these loci.

  20. Occupant performance and building energy consumption with different philosophies of determining acceptable thermal conditions

    DEFF Research Database (Denmark)

    Toftum, Jørn; Andersen, Rune Vinther; Jensen, Kasper Lynge

    2009-01-01

    Based on building energy and indoor environment simulations, this study uses a recently developed method relying on Bayesian Network theory to estimate and compare the consequences for occupant performance and energy consumption of applying temperature criteria set according to the adaptive model...... configurations, especially in the tropical climate, the estimated performance differed only modestly between configurations. However, energy consumption was always lower in buildings without mechanical cooling, particularly so in the tropical climate. The findings indicate that determining acceptable indoor...... thermal environments with the adaptive comfort model may result in significant energy savings and at the same time will not have large consequences for the mental performance of occupants....

  1. Comparison of Chemical Extraction Methods for Determination of Soil Potassium in Different Soil Types

    Science.gov (United States)

    Zebec, V.; Rastija, D.; Lončarić, Z.; Bensa, A.; Popović, B.; Ivezić, V.

    2017-12-01

    Determining potassium supply of soil plays an important role in intensive crop production, since it is the basis for balancing nutrients and issuing fertilizer recommendations for achieving high and stable yields within economic feasibility. The aim of this study was to compare the different extraction methods of soil potassium from arable horizon of different types of soils with ammonium lactate method (KAL), which is frequently used as analytical method for determining the accessibility of nutrients and it is a common method used for issuing fertilizer recommendations in many Europe countries. In addition to the ammonium lactate method (KAL, pH 3.75), potassium was extracted with ammonium acetate (KAA, pH 7), ammonium acetate ethylenediaminetetraacetic acid (KAAEDTA, pH 4.6), Bray (KBRAY, pH 2.6) and with barium chloride (K_{BaCl_2 }, pH 8.1). The analyzed soils were extremely heterogeneous with a wide range of determined values. Soil pH reaction ( {pH_{H_2 O} } ) ranged from 4.77 to 8.75, organic matter content ranged from 1.87 to 4.94% and clay content from 8.03 to 37.07%. In relation to KAL method as the standard method, K_{BaCl_2 } method extracts 12.9% more on average of soil potassium, while in relation to standard method, on average KAA extracts 5.3%, KAAEDTA 10.3%, and KBRAY 27.5% less of potassium. Comparison of analyzed extraction methods of potassium from the soil is of high precision, and most reliable comparison was KAL method with KAAEDTA, followed by a: KAA, K_{BaCl_2 } and KBRAY method. Extremely significant statistical correlation between different extractive methods for determining potassium in the soil indicates that any of the methods can be used to accurately predict the concentration of potassium in the soil, and that carried out research can be used to create prediction model for concentration of potassium based on different methods of extraction.

  2. Determination of equilibrium composition of thermally ionized monoatomic gas under different physical conditions

    Science.gov (United States)

    Romanova, M. S.; Rydalevskaya, M. A.

    2017-05-01

    Perfect gas mixtures that result from thermal ionization of spatially and chemically homogeneous monoatomic gases are considered. Equilibrium concentrations of the components of such mixtures are determined using integration over the momentum space and summation with respect to energy levels of the distribution functions that maximize the entropy of system under condition for constancy of the total number of nuclei and electrons. It is demonstrated that such a method allows significant simplification of the calculation of the equilibrium composition for ionized mixtures at different temperatures and makes it possible to study the degree of ionization of gas versus gas density and number in the periodic table of elements.

  3. Determination of iron content in whole blood in different mouse strains using a portable XRFS spectrometer

    International Nuclear Information System (INIS)

    Zamboni, C.B.; Metairon, Sabrina; Suzuki, M.F.; Bahovschi, Vanessa; Rizzutto, M.A.

    2016-01-01

    Iron has an important role in blood as an indicator of a great number of anomalies. Anemia due to iron-deficiency in the world is a public health problem in all ages and socioeconomic levels. Nowadays, Brazil's pharmaceutical companies are testing iron compounds to reduce the costs of those new drugs. In this study, Energy Dispersive X-Ray Fluorescence Technique was applied to determine Fe concentrations in blood samples of different mice strains using a Portable XRF Spectrometer. These data may help researchers choose the convenient mice strain that best meets its medical investigation, reducing costs and optimizing their researches. (author)

  4. Determination of transmission factors for beta radiation at different experimental conditions

    International Nuclear Information System (INIS)

    Albuquerque, M. da P.P.; Caldas, L.V.E.

    1988-06-01

    During the transmission factors determination of beta radiation in air, using an ionization chamber with variable volume (extrapolation chamber), connected to a digital electrometer, and the secondary standard system constituted by the 90 Sr + 90 Y, 204 Tl and 147 Pm sources, the positioning of absorber materials equivalent to tissue, in relation to the detector and to the radiation sources is fundamental. In this work the absorbers were positioned in front of the sources, as well in front of the chamber, in different experiments, and the data were compared. (author) [pt

  5. Determination of spatial parameters for different star groups in the Hertzsprung-Russell diagram

    International Nuclear Information System (INIS)

    Kharadze, E.K.; Bartaya, R.A.; Vereshchagin, S.V.; Dluzhnevskaya, O.B.; Pavlovskaya, E.D.; Piskunov, A.Eh.; AN SSSR, Moscow. Astronomicheskij Sovet; Moskovskij Gosudarstvennyj Univ.

    1987-01-01

    Space densities and parameters of z-distribution for ten star groups in the Hertzsprung - Russell diagram (A - K3, A - G4, A - G5) were determined. Data from the Abastumani two-dimensional spectral classification catalogue, and a statistical procedure of data processing, allowing to take into account uncertainties of observational data as well as the catalogue selection effect, were used. The study of the space distributions allowed to carry out an independent estimation of a luminosity dispersion for different sequences in the Hertsprung - Russell diagram

  6. Comparison of different approaches to determine the bursting threshold at ANKA

    Energy Technology Data Exchange (ETDEWEB)

    Schoenfeldt, Patrik; Hiller, Nicole; Judin, Vitali; Mueller, Anke-Susanne [Karlsruher Institut fuer Technologie (KIT), Karlsruhe (Germany)

    2013-07-01

    The synchrotron light source ANKA at the Karlsruhe Institute of Technology provides a dedicated low-α-optics. In this mode bursting of Coherent Synchrotron Radiation (CSR) is observed for bunch charges above a threshold that depends on beam parameters. This threshold can be determined by several approaches, e.g. bunch lengthening or changes in the THz radiation spectra. This talk compares different methods and their implementation at the ANKA storage ring outlining their advantages, disadvantages and limitations, including reliability and possibility of real time analysis.

  7. A Guide for Minnesota Parents to the Individualized Education Program (IEP), 2014 Edition

    Science.gov (United States)

    PACER Center, 2014

    2014-01-01

    Every child is unique and learns in different ways. Some children are identified as needing special education services to support his or her learning at school. Parents can play a major role in shaping the services a child receives. This guidebook has been written for parents, guardians, and surrogate parents of a child (ages 3 to 21 or…

  8. The scratch test - Different critical load determination techniques. [adhesive strength of thin hard coatings

    Science.gov (United States)

    Sekler, J.; Hintermann, H. E.; Steinmann, P. A.

    1988-01-01

    Different critical load determination techniques such as microscopy, acoustic emission, normal, tangential, and lateral forces used for scratch test evaluation of complex or multilayer coatings are investigated. The applicability of the scratch test to newly developed coating techniques, systems, and applications is discussed. Among the methods based on the use of a physical measurement, acoustic emission detection is the most effective. The dynamics ratio between the signals below and above the critical load for the acoustic emission (much greater than 100) is well above that obtained with the normal, tangential, and lateral forces. The present commercial instruments are limited in load application performance. A scratch tester able to apply accurate loads as low as 0.01 N would probably overcome most of the actual limitations and would be expected to extend the scratch testing technique to different application fields such as optics and microelectronics.

  9. Spectroscopic determination of ionization constants of quinoline and 3-aminoquinoline at different temperature

    International Nuclear Information System (INIS)

    Indhar, H.A.B.

    2000-01-01

    Quinoline and its derivative are chemically and biologically important heterocylic compounds. Its ionization constant (pK/sub a/ values have been previously determined only at 18 or 20 deg. C. We have enhanced this work at different temperatures from 20-50 deg. C at the interval of 5 deg. C. The dissociation constants (pk/sub a/s), and Gibb's free energies of quinoline and 3-aminoquinoline have been determined by UV-Spectrophotometer (lambda 2) equipped with a temperature control of - + 0.1 deg. C at temperatures ranging from 20-50 deg. C in water. The experimental data have been used for the determination of thermodynamic ionization constants (pk /sub a //sup t/) sub t/, concentration ionization constants (pK/sub a//sup M/) and Gibbs's free energy values of pK/sub a/sup M/. The ionization constant values decrease with increase of temperature. The significance of relative magnitudes of the values is discussed and some useful generalization are obtained. The curves are parabolic. A computer program in GW-BASIC calculates the values of dissociation constants. From the pK/sub a/ values, Gibb's free energies are compared and discussed. (author)

  10. Determination of the kinetic parameters of BeO thermoluminescent samples using different methods

    Energy Technology Data Exchange (ETDEWEB)

    Algarve, Fábio J.; Caldas, Linda V.E., E-mail: fjalgarve@ipen.br, E-mail: lcaldas@ipen.br [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP), São Paulo, SP (Brazil)

    2017-07-01

    The objective of this work was to determine the kinetic parameters of BeO thermoluminescent (TL) samples. The knowledge of the kinetic parameters is important for the general description of the physical characteristics of a thermoluminescent material. Using a linear heating rate of 5K/s{sup -1}, the BeO peak temperatures obtained were (474.7 ± 1.2) K and (620.5 ± 1.2) K, respectively, for the first and second TL peaks. The peak shape and the glow curve area measurement methods and the Urbach formula have been used for the trap parameter determination. A kinetic order of about two was determined for the first peak, whereas the second peak followed the first-order kinetics according to the geometrical factor. The energy activation values obtained using different kinds of measurements are in good agreement, including the Kitis method for deconvolution of the glow curve. Furthermore the results agree with those presented by other authors. (author)

  11. Development and validation of micellar liquid chromatographic methods for the determination of antibiotics in different matrixes.

    Science.gov (United States)

    Rambla-Alegre, Maria; Esteve-Romero, Josep; Carda-Broch, Samuel

    2011-01-01

    Antibiotics are the most important bioactive and chemotherapeutic compounds to be produced by microbiological synthesis, and they have proved their worth in a variety of fields, such as medicinal chemistry, agriculture, and the food industry. Interest in antibiotics has grown in parallel with an increasingly high degree of productivity in the field of analytical applications. Therefore, it is necessary to develop chromatographic procedures capable of determining various drugs simultaneously in the shortest possible time. Micellar liquid chromatography (MLC) is an RP-HPLC technique that offers advantages over conventional HPLC as far as sample preparation, selectivity, and versatility are concerned. Its main advantage is that samples can be injected directly into the chromatographic system with no previous preparation step. This paper mainly focuses on the results of the authors' own recent research and reports the chromatographic conditions for determination of various antibiotics (penicillins, quinolones, and sulfonamides) in different matrixes (pharmaceuticals, biological fluids, and food). The work of other authors on MLC-based antibiotic determination has been included.

  12. Determination of polonium 210 in different types of tobacco consumed in Sudan

    International Nuclear Information System (INIS)

    Abdulrahman, M. E.

    2011-01-01

    The carcinogenic effect of 210 Po with respect to lung cancer is an important problem in many countries with very high cigarette consumption. Sudan is one of the consumptions of cigarettes in the world. The aim of this study was the determination polonium-210 in different parts of tobacco plant comes from China and Brazil consumed in cigarette in Sudan and determination of 210 Po in five most frequently smoked brands more consumption in Sudan. The annual committed effective dose from cigarette was determined and comparison with other results reported in literature. The tobacco plant (leaves and root) for analysis were collected from Haggar factory in Sudan and another brand were collected randomly from markets, only the most popular one was chosen for analysis (Bringi, Lord, Winner, Goal, Benson). The polonium-210 activity was measured on an alpha-spectrometer equipped with semiconductor surface barrier silicon detectors after spontaneously plated onto asilver disc from hydrochloric acid medium. Polonium samples were measured for 2-3 days. The accuracy and precision of radiochemical method were evaluated using (IAEA-326). The values of activity concentration of 210 Po found in cigarettes consumed in Sudan are within of the range of values found in the literature. The 210 Po presented concentration in different brands ranging from 22.8 to 51.6 Bqkg -1 (average 36.54 Bq kg -1 ). The activity concentration of 210 Po in popular brand cigarette tobacco is higher than that in fine brand cigarette tobacco. Found the highest concentration in the raw material compared to the final product is attributed that to the import, storage and manufacturing processes. Activity determination indicates those cigarettes consumed in Sudan are comparable to the values reported in China and Brazil that the raw material comes from these two countries. The polonium is non-uniformly distributed within the tobacco plants analyzed in this study, the highest levels were found in the leaves

  13. Double adjoint method for determining the contribution of composition to reactivity at different times

    International Nuclear Information System (INIS)

    Christie, S.A.; Lathouwers, D.; Kloosterman, J.L.

    2013-01-01

    Highlights: ► The double adjoint method is described. ► System reloading is determined so the multiplication factor behaviour is repeated. ► Both fast and thermal systems behave as desired. ► Allowance must be made for indirect effects in thermal systems. ► An alternative definition of breeding ratio is derived. -- Abstract: The double adjoint method uses the adjoint reactivity and transmutation problems to describe how the system composition is related to the system reactivity at different points in time. Values of the contribution to the reactivity are determined using the adjoint reactivity problem, and these are then used as the source function for the adjoint transmutation problem. The method is applied to the problem of determining the contribution of the beginning of cycle composition to the end of cycle reactivity. It is tested in both fast and thermal systems by comparing the behaviour of the multiplication factor at the end of cycle in calculations with perturbed initial compositions to that predicted by the double adjoint method. The results from the fast system are good, while those from the thermal system are less favourable. This is believed to be due to the method neglecting the coupling between the composition and the flux, which plays a more significant role in thermal systems than fast ones. The importance of correcting for the effects of the fuel compound is also established. The values found are used in calculations to determine the appropriate fuel reloading of the systems tested, with the aim of duplicating the behaviour of the multiplication factor of the original system. Again the fast system gives good results, while the thermal system is less accurate. The double adjoint method is also used for a definition of breeding ratio, and some of the features of this definition are illustrated by examining the effects of different feed materials and reprocessing schemes. The method is shown to be a useful tool for the comparison of the

  14. Determination of polonium 210 in different types of tobacco consumed in Sudan

    Energy Technology Data Exchange (ETDEWEB)

    Abdulrahman, M E [Sudan Academy of Sciences, Atomic Energy Council, Khartoum (Sudan)

    2011-01-15

    The carcinogenic effect of {sup 210} Po with respect to lung cancer is an important problem in many countries with very high cigarette consumption. Sudan is one of the consumptions of cigarettes in the world. The aim of this study was the determination polonium-210 in different parts of tobacco plant comes from China and Brazil consumed in cigarette in Sudan and determination of {sup 210} Po in five most frequently smoked brands more consumption in Sudan. The annual committed effective dose from cigarette was determined and comparison with other results reported in literature. The tobacco plant (leaves and root) for analysis were collected from Haggar factory in Sudan and another brand were collected randomly from markets, only the most popular one was chosen for analysis (Bringi, Lord, Winner, Goal, Benson). The polonium-210 activity was measured on an alpha-spectrometer equipped with semiconductor surface barrier silicon detectors after spontaneously plated onto asilver disc from hydrochloric acid medium. Polonium samples were measured for 2-3 days. The accuracy and precision of radiochemical method were evaluated using (IAEA-326). The values of activity concentration of {sup 210} Po found in cigarettes consumed in Sudan are within of the range of values found in the literature. The {sup 210} Po presented concentration in different brands ranging from 22.8 to 51.6 Bqkg{sup -1}(average 36.54 Bq kg{sup -1}). The activity concentration of {sup 210} Po in popular brand cigarette tobacco is higher than that in fine brand cigarette tobacco. Found the highest concentration in the raw material compared to the final product is attributed that to the import, storage and manufacturing processes. Activity determination indicates those cigarettes consumed in Sudan are comparable to the values reported in China and Brazil that the raw material comes from these two countries. The polonium is non-uniformly distributed within the tobacco plants analyzed in this study, the highest

  15. Comparison of different thin layer detection techniques to determine the radiochemical purity of radiopharmaceuticals

    International Nuclear Information System (INIS)

    Hammermaier, A.; Reich, E.; Boegl, W.

    1985-01-01

    Ten radiopharmaceuticals frequently used in clinical treatment were examined as to their radiochemical purity by paper and thin layer chromatography or electrophoresis, respectively. It is known that radiochemical impurities may result in an unnecessary exposure of the patients to be examined. Other than determining the radiochemical purity of several radiopharmaceuticals, a comparison of the different measuring methods of distributing activity on radiochromatograms or electropherograms is intended by this study. For this, the activity distribution in the developed radiochromatograms was assessed by four different measuring methods (TLC-linear analyzer, TLC-scanner with NaI(Tl) detector, TLC-scanner with gas flow counter and NaI(Tl) well-typ counter). As shown by the above analysis, only the TLC-linear analyzer and the NaI(Tl) well-typ counter (measurement of chromatograms or electropherograms cut into strips) are generally suitable methods for determining the radiochemical purity of radiochemicals, the TLC-scanner with gas flow counter is usable in most cases, while TLC-scanner with NaI(Tl) detector is yielding unsatisfactory results. (orig.) [de

  16. DETERMINING OPTIMAL CUBE FOR 3D-DCT BASED VIDEO COMPRESSION FOR DIFFERENT MOTION LEVELS

    Directory of Open Access Journals (Sweden)

    J. Augustin Jacob

    2012-11-01

    Full Text Available This paper proposes new three dimensional discrete cosine transform (3D-DCT based video compression algorithm that will select the optimal cube size based on the motion content of the video sequence. It is determined by finding normalized pixel difference (NPD values, and by categorizing the cubes as “low” or “high” motion cube suitable cube size of dimension either [16×16×8] or[8×8×8] is chosen instead of fixed cube algorithm. To evaluate the performance of the proposed algorithm test sequence with different motion levels are chosen. By doing rate vs. distortion analysis the level of compression that can be achieved and the quality of reconstructed video sequence are determined and compared against fixed cube size algorithm. Peak signal to noise ratio (PSNR is taken to measure the video quality. Experimental result shows that varying the cube size with reference to the motion content of video frames gives better performance in terms of compression ratio and video quality.

  17. Determination of the sign of the decay width difference in the $B^0_s$ system

    CERN Document Server

    Aaij, R; Adeva, B; Adinolfi, M; Adrover, C; Affolder, A; Ajaltouni, Z; Albrecht, J; Alessio, F; Alexander, M; Alkhazov, G; Alvarez Cartelle, P; Alves Jr, A A; Amato, S; Amhis, Y; Anderson, J; Appleby, R B; Aquines Gutierrez, O; Archilli, F; Arrabito, L; Artamonov, A; Artuso, M; Aslanides, E; Auriemma, G; Bachmann, S; Back, J J; Bailey, D S; Balagura, V; Baldini, W; Barlow, R J; Barschel, C; Barsuk, S; Barter, W; Bates, A; Bauer, C; Bauer, Th; Bay, A; Bediaga, I; Belogurov, S; Belous, K; Belyaev, I; Ben-Haim, E; Benayoun, M; Bencivenni, G; Benson, S; Benton, J; Bernet, R; Bettler, M -O; van Beuzekom, M; Bien, A; Bifani, S; Bird, T; Bizzeti, A; Bjørnstad, P M; Blake, T; Blanc, F; Blanks, C; Blouw, J; Blusk, S; Bobrov, A; Bocci, V; Bondar, A; Bondar, N; Bonivento, W; Borghi, S; Borgia, A; Bowcock, T J V; Bozzi, C; Brambach, T; van den Brand, J; Bressieux, J; Brett, D; Britsch, M; Britton, T; Brook, N H; Brown, H; Büchler-Germann, A; Burducea, I; Bursche, A; Buytaert, J; Cadeddu, S; Callot, O; Calvi, M; Calvo Gomez, M; Camboni, A; Campana, P; Carbone, A; Carboni, G; Cardinale, R; Cardini, A; Carson, L; Carvalho Akiba, K; Casse, G; Cattaneo, M; Cauet, Ch; Charles, M; Charpentier, Ph; Chiapolini, N; Ciba, K; Cid Vidal, X; Ciezarek, G; Clarke, P E L; Clemencic, M; Cliff, H V; Closier, J; Coca, C; Coco, V; Cogan, J; Collins, P; Comerma-Montells, A; Constantin, F; Contu, A; Cook, A; Coombes, M; Corti, G; Couturier, B; Cowan, G A; Currie, R; D'Ambrosio, C; David, P; David, P N Y; De Bonis, I; De Bruyn, K; De Capua, S; De Cian, M; De Lorenzi, F; De Miranda, J M; De Paula, L; De Simone, P; Decamp, D; Deckenhoff, M; Degaudenzi, H; Del Buono, L; Deplano, C; Derkach, D; Deschamps, O; Dettori, F; Dickens, J; Dijkstra, H; Diniz Batista, P; Domingo Bonal, F; Donleavy, S; Dordei, F; Dosil Suárez, A; Dossett, D; Dovbnya, A; Dupertuis, F; Dzhelyadin, R; Dziurda, A; Easo, S; Egede, U; Egorychev, V; Eidelman, S; van Eijk, D; Eisele, F; Eisenhardt, S; Ekelhof, R; Eklund, L; Elsasser, Ch; Elsby, D; Esperante Pereira, D; Falabella, A; Fanchini, E; Färber, C; Fardell, G; Farinelli, C; Farry, S; Fave, V; Fernandez Albor, V; Ferro-Luzzi, M; Filippov, S; Fitzpatrick, C; Fontana, M; Fontanelli, F; Forty, R; Francisco, O; Frank, M; Frei, C; Frosini, M; Furcas, S; Gallas Torreira, A; Galli, D; Gandelman, M; Gandini, P; Gao, Y; Garnier, J-C; Garofoli, J; Garra Tico, J; Garrido, L; Gascon, D; Gaspar, C; Gauld, R; Gauvin, N; Gersabeck, M; Gershon, T; Ghez, Ph; Gibson, V; Gligorov, V V; Göbel, C; Golubkov, D; Golutvin, A; Gomes, A; Gordon, H; Grabalosa Gándara, M; Graciani Diaz, R; Granado Cardoso, L A; Graugés, E; Graziani, G; Grecu, A; Greening, E; Gregson, S; Gui, B; Gushchin, E; Guz, Yu; Gys, T; Hadjivasiliou, C; Haefeli, G; Haen, C; Haines, S C; Hampson, T; Hansmann-Menzemer, S; Harji, R; Harnew, N; Harrison, J; Harrison, P F; Hartmann, T; He, J; Heijne, V; Hennessy, K; Henrard, P; Hernando Morata, J A; van Herwijnen, E; Hicks, E; Holubyev, K; Hopchev, P; Hulsbergen, W; Hunt, P; Huse, T; Huston, R S; Hutchcroft, D; Hynds, D; Iakovenko, V; Ilten, P; Imong, J; Jacobsson, R; Jaeger, A; Jahjah Hussein, M; Jans, E; Jansen, F; Jaton, P; Jean-Marie, B; Jing, F; John, M; Johnson, D; Jones, C R; Jost, B; Kaballo, M; Kandybei, S; Karacson, M; Karbach, T M; Keaveney, J; Kenyon, I R; Kerzel, U; Ketel, T; Keune, A; Khanji, B; Kim, Y M; Knecht, M; Koopman, R F; Koppenburg, P; Korolev, M; Kozlinskiy, A; Kravchuk, L; Kreplin, K; Kreps, M; Krocker, G; Krokovny, P; Kruse, F; Kruzelecki, K; Kucharczyk, M; Kvaratskheliya, T; La Thi, V N; Lacarrere, D; Lafferty, G; Lai, A; Lambert, D; Lambert, R W; Lanciotti, E; Lanfranchi, G; Langenbruch, C; Latham, T; Lazzeroni, C; Le Gac, R; van Leerdam, J; Lees, J -P; Lefèvre, R; Leflat, A; Lefrançois, J; Leroy, O; Lesiak, T; Li, L; Li Gioi, L; Lieng, M; Liles, M; Lindner, R; Linn, C; Liu, B; Liu, G; von Loeben, J; Lopes, J H; Lopez Asamar, E; Lopez-March, N; Lu, H; Luisier, J; Mac Raighne, A; Machefert, F; Machikhiliyan, I V; Maciuc, F; Maev, O; Magnin, J; Malde, S; Mamunur, R M D; Manca, G; Mancinelli, G; Mangiafave, N; Marconi, U; Märki, R; Marks, J; Martellotti, G; Martens, A; Martin, L; Martín Sánchez, A; Martinez Santos, D; Massafferri, A; Mathe, Z; Matteuzzi, C; Matveev, M; Maurice, E; Maynard, B; Mazurov, A; McGregor, G; McNulty, R; Meissner, M; Merk, M; Merkel, J; Messi, R; Miglioranzi, S; Milanes, D A; Minard, M -N; Molina Rodriguez, J; Monteil, S; Moran, D; Morawski, P; Mountain, R; Mous, I; Muheim, F; Müller, K; Muresan, R; Muryn, B; Muster, B; Musy, M; Mylroie-Smith, J; Naik, P; Nakada, T; Nandakumar, R; Nasteva, I; Nedos, M; Needham, M; Neufeld, N; Nguyen, A D; Nguyen-Mau, C; Nicol, M; Niess, V; Nikitin, N; Nikodem, T; Nomerotski, A; Novoselov, A; Oblakowska-Mucha, A; Obraztsov, V; Oggero, S; Ogilvy, S; Okhrimenko, O; Oldeman, R; Orlandea, M; Otalora Goicochea, J M; Owen, P; Pal, B K; Palacios, J; Palano, A; Palutan, M; Panman, J; Papanestis, A; Pappagallo, M; Parkes, C; Parkinson, C J; Passaleva, G; Patel, G D; Patel, M; Paterson, S K; Patrick, G N; Patrignani, C; Pavel-Nicorescu, C; Pazos Alvarez, A; Pellegrino, A; Penso, G; Pepe Altarelli, M; Perazzini, S; Perego, D L; Perez Trigo, E; Pérez-Calero Yzquierdo, A; Perret, P; Perrin-Terrin, M; Pessina, G; Petrella, A; Petrolini, A; Phan, A; Picatoste Olloqui, E; Pie Valls, B; Pietrzyk, B; Pilař, T; Pinci, D; Plackett, R; Playfer, S; Plo Casasus, M; Polok, G; Poluektov, A; Polycarpo, E; Popov, D; Popovici, B; Potterat, C; Powell, A; Prisciandaro, J; Pugatch, V; Puig Navarro, A; Qian, W; Rademacker, J H; Rakotomiaramanana, B; Rangel, M S; Raniuk, I; Raven, G; Redford, S; Reid, M M; dos Reis, A C; Ricciardi, S; Richards, A; Rinnert, K; Roa Romero, D A; Robbe, P; Rodrigues, E; Rodrigues, F; Rodriguez Perez, P; Rogers, G J; Roiser, S; Romanovsky, V; Rosello, M; Rouvinet, J; Ruf, T; Ruiz, H; Sabatino, G; Saborido Silva, J J; Sagidova, N; Sail, P; Saitta, B; Salzmann, C; Sannino, M; Santacesaria, R; Santamarina Rios, C; Santinelli, R; Santovetti, E; Sapunov, M; Sarti, A; Satriano, C; Satta, A; Savrie, M; Savrina, D; Schaack, P; Schiller, M; Schleich, S; Schlupp, M; Schmelling, M; Schmidt, B; Schneider, O; Schopper, A; Schune, M -H; Schwemmer, R; Sciascia, B; Sciubba, A; Seco, M; Semennikov, A; Senderowska, K; Sepp, I; Serra, N; Serrano, J; Seyfert, P; Shapkin, M; Shapoval, I; Shatalov, P; Shcheglov, Y; Shears, T; Shekhtman, L; Shevchenko, O; Shevchenko, V; Shires, A; Silva Coutinho, R; Skwarnicki, T; Smith, N A; Smith, E; Sobczak, K; Soler, F J P; Solomin, A; Soomro, F; Souza De Paula, B; Spaan, B; Sparkes, A; Spradlin, P; Stagni, F; Stahl, S; Steinkamp, O; Stoica, S; Stone, S; Storaci, B; Straticiuc, M; Straumann, U; Subbiah, V K; Swientek, S; Szczekowski, M; Szczypka, P; Szumlak, T; T'Jampens, S; Teodorescu, E; Teubert, F; Thomas, C; Thomas, E; van Tilburg, J; Tisserand, V; Tobin, M; Tolk, S; Topp-Joergensen, S; Torr, N; Tournefier, E; Tourneur, S; Tran, M T; Tsaregorodtsev, A; Tuning, N; Ubeda Garcia, M; Ukleja, A; Urquijo, P; Uwer, U; Vagnoni, V; Valenti, G; Vazquez Gomez, R; Vazquez Regueiro, P; Vecchi, S; Velthuis, J J; Veltri, M; Viaud, B; Videau, I; Vieira, D; Vilasis-Cardona, X; Visniakov, J; Vollhardt, A; Volyanskyy, D; Voong, D; Vorobyev, A; Voss, H; Wandernoth, S; Wang, J; Ward, D R; Watson, N K; Webber, A D; Websdale, D; Whitehead, M; Wiedner, D; Wiggers, L; Wilkinson, G; Williams, M P; Williams, M; Wilson, F F; Wishahi, J; Witek, M; Witzeling, W; Wotton, S A; Wyllie, K; Xie, Y; Xing, F; Xing, Z; Yang, Z; Young, R; Yushchenko, O; Zangoli, M; Zavertyaev, M; Zhang, F; Zhang, L; Zhang, W C; Zhang, Y; Zhelezov, A; Zhong, L; Zvyagin, A

    2012-01-01

    The interference between the $K^+K^-$ S-wave and P-wave amplitudes in $B_s \\rightarrow J/\\psi K^+K^-$ decays with the $K^+K^-$ pairs in the region around the $\\phi(1020)$ resonance is used to determine the variation of the difference of the strong phase between these amplitudes as a function of $K^+K^-$ invariant mass. Combined with the results from our $CP$ asymmetry measurements in the $B_s \\rightarrow J/\\psi \\phi$ decays, we conclude that the $B_s$ mass eigenstate that is almost $CP =+1$ is lighter and decays faster than the mass eigenstate that is almost $CP =-1$. This determines the sign of the decay width difference $\\Delta\\Gamma_s \\equiv \\Gamma_L -\\Gamma_H$ to be positive. Our result also resolves the ambiguity in the past measurements of the $CP$ violating phase $\\phi_s$ to be close to zero rather than $\\pi$. These conclusions are in agreement with the Standard Model expectations.

  18. The Sex Determination Gene transformer Regulates Male-Female Differences in Drosophila Body Size.

    Science.gov (United States)

    Rideout, Elizabeth J; Narsaiya, Marcus S; Grewal, Savraj S

    2015-12-01

    Almost all animals show sex differences in body size. For example, in Drosophila, females are larger than males. Although Drosophila is widely used as a model to study growth, the mechanisms underlying this male-female difference in size remain unclear. Here, we describe a novel role for the sex determination gene transformer (tra) in promoting female body growth. Normally, Tra is expressed only in females. We find that loss of Tra in female larvae decreases body size, while ectopic Tra expression in males increases body size. Although we find that Tra exerts autonomous effects on cell size, we also discovered that Tra expression in the fat body augments female body size in a non cell-autonomous manner. These effects of Tra do not require its only known targets doublesex and fruitless. Instead, Tra expression in the female fat body promotes growth by stimulating the secretion of insulin-like peptides from insulin producing cells in the brain. Our data suggest a model of sex-specific growth in which body size is regulated by a previously unrecognized branch of the sex determination pathway, and identify Tra as a novel link between sex and the conserved insulin signaling pathway.

  19. Determination of the sign of the decay width difference in the B(s)(0) system.

    Science.gov (United States)

    Aaij, R; Abellan Beteta, C; Adeva, B; Adinolfi, M; Adrover, C; Affolder, A; Ajaltouni, Z; Albrecht, J; Alessio, F; Alexander, M; Alkhazov, G; Alvarez Cartelle, P; Alves, A A; Amato, S; Amhis, Y; Anderson, J; Appleby, R B; Aquines Gutierrez, O; Archilli, F; Arrabito, L; Artamonov, A; Artuso, M; Aslanides, E; Auriemma, G; Bachmann, S; Back, J J; Bailey, D S; Balagura, V; Baldini, W; Barlow, R J; Barschel, C; Barsuk, S; Barter, W; Bates, A; Bauer, C; Bauer, Th; Bay, A; Bediaga, I; Belogurov, S; Belous, K; Belyaev, I; Ben-Haim, E; Benayoun, M; Bencivenni, G; Benson, S; Benton, J; Bernet, R; Bettler, M-O; van Beuzekom, M; Bien, A; Bifani, S; Bird, T; Bizzeti, A; Bjørnstad, P M; Blake, T; Blanc, F; Blanks, C; Blouw, J; Blusk, S; Bobrov, A; Bocci, V; Bondar, A; Bondar, N; Bonivento, W; Borghi, S; Borgia, A; Bowcock, T J V; Bozzi, C; Brambach, T; van den Brand, J; Bressieux, J; Brett, D; Britsch, M; Britton, T; Brook, N H; Brown, H; de Bruyn, K; Büchler-Germann, A; Burducea, I; Bursche, A; Buytaert, J; Cadeddu, S; Callot, O; Calvi, M; Calvo Gomez, M; Camboni, A; Campana, P; Carbone, A; Carboni, G; Cardinale, R; Cardini, A; Carson, L; Carvalho Akiba, K; Casse, G; Cattaneo, M; Cauet, Ch; Charles, M; Charpentier, Ph; Chiapolini, N; Ciba, K; Cid Vidal, X; Ciezarek, G; Clarke, P E L; Clemencic, M; Cliff, H V; Closier, J; Coca, C; Coco, V; Cogan, J; Collins, P; Comerma-Montells, A; Constantin, F; Contu, A; Cook, A; Coombes, M; Corti, G; Couturier, B; Cowan, G A; Currie, R; D'Ambrosio, C; David, P; David, P N Y; De Bonis, I; De Capua, S; De Cian, M; De Lorenzi, F; De Miranda, J M; De Paula, L; De Simone, P; Decamp, D; Deckenhoff, M; Degaudenzi, H; Del Buono, L; Deplano, C; Derkach, D; Deschamps, O; Dettori, F; Dickens, J; Dijkstra, H; Diniz Batista, P; Domingo Bonal, F; Donleavy, S; Dordei, F; Dosil Suárez, A; Dossett, D; Dovbnya, A; Dupertuis, F; Dzhelyadin, R; Dziurda, A; Easo, S; Egede, U; Egorychev, V; Eidelman, S; van Eijk, D; Eisele, F; Eisenhardt, S; Ekelhof, R; Eklund, L; Elsasser, Ch; Elsby, D; Esperante Pereira, D; Falabella, A; Fanchini, E; Färber, C; Fardell, G; Farinelli, C; Farry, S; Fave, V; Fernandez Albor, V; Ferro-Luzzi, M; Filippov, S; Fitzpatrick, C; Fontana, M; Fontanelli, F; Forty, R; Francisco, O; Frank, M; Frei, C; Frosini, M; Furcas, S; Gallas Torreira, A; Galli, D; Gandelman, M; Gandini, P; Gao, Y; Garnier, J-C; Garofoli, J; Garra Tico, J; Garrido, L; Gascon, D; Gaspar, C; Gauld, R; Gauvin, N; Gersabeck, M; Gershon, T; Ghez, Ph; Gibson, V; Gligorov, V V; Göbel, C; Golubkov, D; Golutvin, A; Gomes, A; Gordon, H; Grabalosa Gándara, M; Graciani Diaz, R; Granado Cardoso, L A; Graugés, E; Graziani, G; Grecu, A; Greening, E; Gregson, S; Gui, B; Gushchin, E; Guz, Yu; Gys, T; Hadjivasiliou, C; Haefeli, G; Haen, C; Haines, S C; Hampson, T; Hansmann-Menzemer, S; Harji, R; Harnew, N; Harrison, J; Harrison, P F; Hartmann, T; He, J; Heijne, V; Hennessy, K; Henrard, P; Hernando Morata, J A; van Herwijnen, E; Hicks, E; Holubyev, K; Hopchev, P; Hulsbergen, W; Hunt, P; Huse, T; Huston, R S; Hutchcroft, D; Hynds, D; Iakovenko, V; Ilten, P; Imong, J; Jacobsson, R; Jaeger, A; Jahjah Hussein, M; Jans, E; Jansen, F; Jaton, P; Jean-Marie, B; Jing, F; John, M; Johnson, D; Jones, C R; Jost, B; Kaballo, M; Kandybei, S; Karacson, M; Karbach, T M; Keaveney, J; Kenyon, I R; Kerzel, U; Ketel, T; Keune, A; Khanji, B; Kim, Y M; Knecht, M; Koopman, R F; Koppenburg, P; Korolev, M; Kozlinskiy, A; Kravchuk, L; Kreplin, K; Kreps, M; Krocker, G; Krokovny, P; Kruse, F; Kruzelecki, K; Kucharczyk, M; Kvaratskheliya, T; La Thi, V N; Lacarrere, D; Lafferty, G; Lai, A; Lambert, D; Lambert, R W; Lanciotti, E; Lanfranchi, G; Langenbruch, C; Latham, T; Lazzeroni, C; Le Gac, R; van Leerdam, J; Lees, J-P; Lefèvre, R; Leflat, A; Lefrançois, J; Leroy, O; Lesiak, T; Li, L; Li Gioi, L; Lieng, M; Liles, M; Lindner, R; Linn, C; Liu, B; Liu, G; von Loeben, J; Lopes, J H; Lopez Asamar, E; Lopez-March, N; Lu, H; Luisier, J; Mac Raighne, A; Machefert, F; Machikhiliyan, I V; Maciuc, F; Maev, O; Magnin, J; Malde, S; Mamunur, R M D; Manca, G; Mancinelli, G; Mangiafave, N; Marconi, U; Märki, R; Marks, J; Martellotti, G; Martens, A; Martin, L; Martín Sánchez, A; Martinez Santos, D; Massafferri, A; Mathe, Z; Matteuzzi, C; Matveev, M; Maurice, E; Maynard, B; Mazurov, A; McGregor, G; McNulty, R; Meissner, M; Merk, M; Merkel, J; Messi, R; Miglioranzi, S; Milanes, D A; Minard, M-N; Molina Rodriguez, J; Monteil, S; Moran, D; Morawski, P; Mountain, R; Mous, I; Muheim, F; Müller, K; Muresan, R; Muryn, B; Muster, B; Musy, M; Mylroie-Smith, J; Naik, P; Nakada, T; Nandakumar, R; Nasteva, I; Nedos, M; Needham, M; Neufeld, N; Nguyen, A D; Nguyen-Mau, C; Nicol, M; Niess, V; Nikitin, N; Nomerotski, A; Novoselov, A; Oblakowska-Mucha, A; Obraztsov, V; Oggero, S; Ogilvy, S; Okhrimenko, O; Oldeman, R; Orlandea, M; Otalora Goicochea, J M; Owen, P; Pal, K; Palacios, J; Palano, A; Palutan, M; Panman, J; Papanestis, A; Pappagallo, M; Parkes, C; Parkinson, C J; Passaleva, G; Patel, G D; Patel, M; Paterson, S K; Patrick, G N; Patrignani, C; Pavel-Nicorescu, C; Pazos Alvarez, A; Pellegrino, A; Penso, G; Pepe Altarelli, M; Perazzini, S; Perego, D L; Perez Trigo, E; Pérez-Calero Yzquierdo, A; Perret, P; Perrin-Terrin, M; Pessina, G; Petrella, A; Petrolini, A; Phan, A; Picatoste Olloqui, E; Pie Valls, B; Pietrzyk, B; Pilař, T; Pinci, D; Plackett, R; Playfer, S; Plo Casasus, M; Polok, G; Poluektov, A; Polycarpo, E; Popov, D; Popovici, B; Potterat, C; Powell, A; Prisciandaro, J; Pugatch, V; Puig Navarro, A; Qian, W; Rademacker, J H; Rakotomiaramanana, B; Rangel, M S; Raniuk, I; Raven, G; Redford, S; Reid, M M; dos Reis, A C; Ricciardi, S; Richards, A; Rinnert, K; Roa Romero, D A; Robbe, P; Rodrigues, E; Rodrigues, F; Rodriguez Perez, P; Rogers, G J; Roiser, S; Romanovsky, V; Rosello, M; Rouvinet, J; Ruf, T; Ruiz, H; Sabatino, G; Saborido Silva, J J; Sagidova, N; Sail, P; Saitta, B; Salzmann, C; Sannino, M; Santacesaria, R; Santamarina Rios, C; Santinelli, R; Santovetti, E; Sapunov, M; Sarti, A; Satriano, C; Satta, A; Savrie, M; Savrina, D; Schaack, P; Schiller, M; Schleich, S; Schlupp, M; Schmelling, M; Schmidt, B; Schneider, O; Schopper, A; Schune, M-H; Schwemmer, R; Sciascia, B; Sciubba, A; Seco, M; Semennikov, A; Senderowska, K; Sepp, I; Serra, N; Serrano, J; Seyfert, P; Shapkin, M; Shapoval, I; Shatalov, P; Shcheglov, Y; Shears, T; Shekhtman, L; Shevchenko, O; Shevchenko, V; Shires, A; Silva Coutinho, R; Skwarnicki, T; Smith, N A; Smith, E; Sobczak, K; Soler, F J P; Solomin, A; Soomro, F; Souza De Paula, B; Spaan, B; Sparkes, A; Spradlin, P; Stagni, F; Stahl, S; Steinkamp, O; Stoica, S; Stone, S; Storaci, B; Straticiuc, M; Straumann, U; Subbiah, V K; Swientek, S; Szczekowski, M; Szczypka, P; Szumlak, T; T'Jampens, S; Teodorescu, E; Teubert, F; Thomas, C; Thomas, E; van Tilburg, J; Tisserand, V; Tobin, M; Topp-Joergensen, S; Torr, N; Tournefier, E; Tourneur, S; Tran, M T; Tsaregorodtsev, A; Tuning, N; Ubeda Garcia, M; Ukleja, A; Urquijo, P; Uwer, U; Vagnoni, V; Valenti, G; Vazquez Gomez, R; Vazquez Regueiro, P; Vecchi, S; Velthuis, J J; Veltri, M; Viaud, B; Videau, I; Vieira, D; Vilasis-Cardona, X; Visniakov, J; Vollhardt, A; Volyanskyy, D; Voong, D; Vorobyev, A; Voss, H; Wandernoth, S; Wang, J; Ward, D R; Watson, N K; Webber, A D; Websdale, D; Whitehead, M; Wiedner, D; Wiggers, L; Wilkinson, G; Williams, M P; Williams, M; Wilson, F F; Wishahi, J; Witek, M; Witzeling, W; Wotton, S A; Wyllie, K; Xie, Y; Xing, F; Xing, Z; Yang, Z; Young, R; Yushchenko, O; Zangoli, M; Zavertyaev, M; Zhang, F; Zhang, L; Zhang, W C; Zhang, Y; Zhelezov, A; Zhong, L; Zvyagin, A

    2012-06-15

    The interference between the K+ K- S-wave and P-wave amplitudes in B(s)(0) → J/ψK+ K- decays with the K+ K- pairs in the region around the ϕ(1020) resonance is used to determine the variation of the difference of the strong phase between these amplitudes as a function of K+ K- invariant mass. Combined with the results from our CP asymmetry measurement in B(s)(0) → J/ψϕ decays, we conclude that the B(s)(0) mass eigenstate that is almost CP = +1 is lighter and decays faster than the mass eigenstate that is almost CP = -1. This determines the sign of the decay width difference ΔΓ(s) ≡ Γ(L) - Γ(H) to be positive. Our result also resolves the ambiguity in the past measurements of the CP violating phase ϕ(s) to be close to zero rather than π. These conclusions are in agreement with the standard model expectations.

  20. The Sex Determination Gene transformer Regulates Male-Female Differences in Drosophila Body Size.

    Directory of Open Access Journals (Sweden)

    Elizabeth J Rideout

    2015-12-01

    Full Text Available Almost all animals show sex differences in body size. For example, in Drosophila, females are larger than males. Although Drosophila is widely used as a model to study growth, the mechanisms underlying this male-female difference in size remain unclear. Here, we describe a novel role for the sex determination gene transformer (tra in promoting female body growth. Normally, Tra is expressed only in females. We find that loss of Tra in female larvae decreases body size, while ectopic Tra expression in males increases body size. Although we find that Tra exerts autonomous effects on cell size, we also discovered that Tra expression in the fat body augments female body size in a non cell-autonomous manner. These effects of Tra do not require its only known targets doublesex and fruitless. Instead, Tra expression in the female fat body promotes growth by stimulating the secretion of insulin-like peptides from insulin producing cells in the brain. Our data suggest a model of sex-specific growth in which body size is regulated by a previously unrecognized branch of the sex determination pathway, and identify Tra as a novel link between sex and the conserved insulin signaling pathway.

  1. Phenotypic differences in teeth dimensions among Chennai population: An aid in sex determination

    Directory of Open Access Journals (Sweden)

    Sreedevi Dharman

    2015-01-01

    Full Text Available Objective: To investigate the presence of sexual dimorphism by studying the size of the teeth among males and females in Chennai population, which aids in sex determination. Materials and Methods: Incisocervical length, mesiodistal and buccolingual diameters were measured in teeth of 60 subjects (30 males, 30 females in the age group of 18-22 years from Chennai population. The differences in the mean values of parameters in males and females were calculated using independent t-test. Discriminant functional analysis was performed to determine the accuracy of sex. Results: Significant differences were found in mean incisocervical length which were found to be larger in males with P < 0.05 in 11, 12, 14, 17, 21, 22, 24, 26, 27, 31, 32, 33, 34, 41, 43, and 45 and with P < 0.001 in 13, 23, 32, 42, 43, and 44, with the exception of 37 and 47 which were larger in females. Mean mesiodistal diameter was larger in males with P < 0.05 in 11, 12, and 21 and with P < 0.001 in 13, 23, 33, and 43. Mean buccolingual diameter was larger in males with P < 0.05 in 12, 21, 31, 33, and 41 and with P < 0.001 in 11, 13, 23, and 43. Accuracy rate of predicting sex based on incisocervical length (17, 23, 47 and mesiodistal diameter (13, 33 was 78.3% and based on buccolingual diameter (13 was 76.7%. Conclusion: Males showed greater sexual dimorphism than females. Application of incisocervical, mesiodistal, and buccolingual dimensional variability among males and females in the Chennai population can aid in sex determination in forensic odontology, as the results showed moderate extent of dimorphism with an overall accuracy rate of predicting sex to be 78%.

  2. Different Spectrophotometric and Chromatographic Methods for Determination of Mepivacaine and Its Toxic Impurity.

    Science.gov (United States)

    Abdelwahab, Nada S; Fared, Nehal F; Elagawany, Mohamed; Abdelmomen, Esraa H

    2017-09-01

    Stability-indicating spectrophotometric, TLC-densitometric, and ultra-performance LC (UPLC) methods were developed for the determination of mepivacaine HCl (MEP) in the presence of its toxic impurity, 2,6-dimethylanaline (DMA). Different spectrophotometric methods were developed for the determination of MEP and DMA. In a dual-wavelength method combined with direct spectrophotometric measurement, the absorbance difference between 221.4 and 240 nm was used for MEP measurements, whereas the absorbance at 283 nm was used for measuring DMA in the binary mixture. In the second-derivative method, amplitudes at 272.2 and 232.6 nm were recorded and used for the determination of MEP and DMA, respectively. The developed TLC-densitometric method depended on chromatographic separation using silica gel 60 F254 TLC plates as a stationary phase and methanol-water-acetic acid (9 + 1 + 0.1, v/v/v) as a developing system, with UV scanning at 230 nm. The developed UPLC method depended on separation using a C18 column (250 × 4.6 mm id, 5 μm particle size) as a stationary phase and acetonitrile-water (40 + 60, v/v; pH 4 with phosphoric acid) as a mobile phase at a flow rate of 0.4 mL/min, with UV detection at 215 nm. The chromatographic run time was approximately 1 min. The proposed methods were validated with respect to International Conference on Harmonization guidelines regarding precision, accuracy, ruggedness, robustness, and specificity.

  3. Cyclists’ Anger As Determinant of Near Misses Involving Different Road Users

    Directory of Open Access Journals (Sweden)

    Víctor Marín Puchades

    2017-12-01

    Full Text Available Road anger constitutes one of the determinant factors related to safety outcomes (e.g., accidents, near misses. Although cyclists are considered vulnerable road users due to their relatively high rate of fatalities in traffic, previous research has solely focused on car drivers, and no study has yet investigated the effect of anger on cyclists’ safety outcomes. The present research aims to investigate, for the first time, the effects of cycling anger toward different types of road users on near misses involving such road users and near misses in general. Using a daily diary web-based questionnaire, we collected data about daily trips, bicycle use, near misses experienced, cyclist’s anger and demographic information from 254 Spanish cyclists. Poisson regression was used to assess the association of cycling anger with near misses, which is a count variable. No relationship was found between general cycling anger and near misses occurrence. Anger toward specific road users had different effects on the probability of near misses with different road users. Anger toward the interaction with car drivers increased the probability of near misses involving cyclists and pedestrians. Anger toward interaction with pedestrians was associated with higher probability of near misses with pedestrians. Anger toward cyclists exerted no effect on the probability of near misses with any road user (i.e., car drivers, cyclists or pedestrians, whereas anger toward the interactions with the police had a diminishing effect on the occurrence of near misses’ involving all types of road users. The present study demonstrated that the effect of road anger on safety outcomes among cyclists is different from that of motorists. Moreover, the target of anger played an important role on safety both for the cyclist and the specific road users. Possible explanations for these differences are based on the difference in status and power with motorists, as well as on the potential

  4. An attempt at determining Des of glacial sediments using different luminescence methods

    International Nuclear Information System (INIS)

    Ou Xianjiao; Lai Zhongping; Zeng Lanhua

    2013-01-01

    Background: Absolute dating is the key technical issue of Quaternary glacial research. Optically stimulated luminescence (OSL) has been increasingly applied to Quaternary glacial dating in recent years. However, problems such as insufficient bleaching, low luminescence sensitivity, high thermal transfer effect, etc, still remain. Purpose: In order to investigate the applicability of equivalent dose (D e ) determination of glacial sediments by different OSL methods, six samples were collected from the Yingpu Valley of eastern Qinghai-Tibetan Plateau (two samples from modern glacial sediments, three from moraines and glacial terrace attributed to Neoglacial and one from a moraine attributed to the last glaciation). Methods: The D e s were determined by SAR combined SGC technique, using three methods: quartz large aliquot (6 mm) BSL, small aliquot (2/3 mm) BSL and polymineral IRSL. Results: D e s determined by SGC are consistent with D e s determined by SAR protocol. Comparison of three methods shows that IRSL D e >large aliquot BSL D e >small aliquot BSL D e . D e s of polymineral IRSL are obviously higher than quartz BSL. Conclusions: It is obviously that feldspar is more difficult to reset than quartz, thus is not suitable for dating glacial sediments in this region. Quartz large aliquot method is suitable for well bleached glacial samples. Due to the low luminescence sensitivity of quartz, small aliquot method showed poor luminescence characteristics. Moreover, this method cannot distinguish the poor bleached grains in this measurement. However, it is possible that quartz small aliquot, even single grain method could be used to date older or brighter glacial samples. More works are required to solve the problems we have encountered in dating low sensitivity glacial sediments. (authors)

  5. Determinants related to gender differences in general practice utilization: Danish Diet, Cancer and Health Cohort.

    Science.gov (United States)

    Jørgensen, Jeanette Therming; Andersen, John Sahl; Tjønneland, Anne; Andersen, Zorana Jovanovic

    2016-09-01

    This study aims to describe the determinants related to gender differences in the GP utilization in Danish population aged 50-65 years. Cohort-based cross-sectional study. Danish general practice. Totally, 54,849 participants of the Danish Diet, Cancer and Health cohort (50-65 years). The sum of cohort members' face-to-face consultations with general practitioner (GP) at the cohort baseline year (1993-1997). We obtained data on GP visits from the Danish National Health Service Register at the cohort baseline (1993-1997), when information on lifestyle (smoking, body mass index (BMI), alcohol use, physical activity), medical conditions (somatic and mental), employment, education, gravidity, and hormone therapy (HT) use was collected by questionnaire. Women had on average 4.1 and men 2.8 consultations per year. In a crude model, women had 47% higher rate of GP visits than men (incidence rate ratio: 1.47; 95% Confidence Interval: 1.45-1.50), which remained unchanged after adjustment for lifestyle, socio-demographic and medical factors, but attenuated to 18% (1.18; 1.13-1.24) after adjustment for female factors (gravidity and post-menopausal HT. In a fully adjusted model, subjects with hypertension (1.63; 1.59-1.67), mental illness (1.63; 1.61-1.66), diabetes (1.56; 1.47-1.65), angina pectoris (1.28; 1.21-1.34), and unemployed persons (1.19; 1.18-1.21) had highest rates of GP visits. Gravidity and HT use explain a large proportion, but not all of the gender difference in GP utilization. Medical conditions (somatic and mental) and unemployment are the main determinants of GP utilization in men and women, while lifestyle has minor effect. Key points Female gender remained a dominant determinant of GP utilization, after adjustment for lifestyle, socio-demography, medical and gender specific factors, with females consulting their GP 18% more often than males. Female reproductive factors (use of postmenopausal hormone therapy and gravidity) explained a large proportion of

  6. Different particle determinants induce apoptosis and cytokine release in primary alveolar macrophage cultures

    Directory of Open Access Journals (Sweden)

    Schwarze Per E

    2006-06-01

    Full Text Available Abstract Background Particles are known to induce both cytokine release (MIP-2, TNF-α, a reduction in cell viability and an increased apoptosis in alveolar macrophages. To examine whether these responses are triggered by the same particle determinants, alveolar macrophages were exposed in vitro to mineral particles of different physical-chemical properties. Results The crystalline particles of the different stone types mylonite, gabbro, basalt, feldspar, quartz, hornfels and fine grain syenite porphyr (porphyr, with a relatively equal size distribution (≤ 10 μm, but different chemical/mineral composition, all induced low and relatively similar levels of apoptosis. In contrast, mylonite and gabbro induced a marked MIP-2 response compared to the other particles. For particles of smaller size, quartz (≤ 2 μm seemed to induce a somewhat stronger apoptotic response than even smaller quartz (≤ 0.5 μm and larger quartz (≤ 10 μm in relation to surface area, and was more potent than hornfels and porphyr (≤ 2 μm. The reduction in cell viability induced by quartz of the different sizes was roughly similar when adjusted to surface area. With respect to cytokines, the release was more marked after exposure to quartz ≤ 0.5 μm than to quartz ≤ 2 μm and ≤ 10 μm. Furthermore, hornfels (≤ 2 μm was more potent than the corresponding hornfels (≤ 10 μm and quartz (≤ 2 μm to induce cytokine responses. Pre-treatment of hornfels and quartz particles ≤ 2 μm with aluminium lactate, to diminish the surface reactivity, did significantly reduce the MIP-2 response to hornfels. In contrast, the apoptotic responses to the particles were not affected. Conclusion These results indicate that different determinants of mineral/stone particles are critical for inducing cytokine responses, reduction in cell viability and apoptosis in alveolar macrophages. The data suggest that the particle surface reactivity was critical for cytokine responses

  7. ANTENATAL DETERMINANTS OF PARENTAL ATTACHMENT AND PARENTING ALLIANCE: HOW DO MOTHERS AND FATHERS DIFFER?

    Science.gov (United States)

    Luz, Rita; George, Astrid; Vieux, Rachel; Spitz, Elisabeth

    2017-03-01

    Parental (parent-to-infant) attachment and parenting alliance are defined as two important components of psychoaffective adjustment to the parental role. This study aimed to build a predictive model of parental attachment and parenting alliance for mothers and fathers using partial least squares-structural equation modeling. Specifically, we were interested in assessing how adult romantic attachment, marital quality, and psychological distress influenced parental attachment (parent-to-infant) and parenting alliance. Forty heterosexual couples completed questionnaires during the third trimester of pregnancy and 2 months after childbirth. Results showed that adult romantic attachment, marital quality, and psychological distress were important antenatal determinants of parental attachment and parenting alliance, although they behaved differently for mothers and fathers. Hence, different predictive models were therefore proposed for mothers and fathers. Mothers' attachment to the child was influenced by internal factors as adult attachment dimensions; for fathers, it also depended on mothers' antenatal attachment to the child and on marital quality. Concerning parenting alliance, both mothers and fathers depended on own and partner's variables. Antenatal variables are important for what occurs during the transition to parenthood in terms of parenting adjustment and act differently for mothers and fathers. It thus is important to assess the psychological functioning of both mothers and fathers. © 2017 Michigan Association for Infant Mental Health.

  8. Comparison of methodologies in determining bone marrow fat percentage under different environmental conditions.

    Science.gov (United States)

    Murden, David; Hunnam, Jaimie; De Groef, Bert; Rawlin, Grant; McCowan, Christina

    2017-01-01

    The use of bone marrow fat percentage has been recommended in assessing body condition at the time of death in wild and domestic ruminants, but few studies have looked at the effects of time and exposure on animal bone marrow. We investigated the utility of bone marrow fat extraction as a tool for establishing antemortem body condition in postmortem specimens from sheep and cattle, particularly after exposure to high heat, and compared different techniques of fat extraction for this purpose. Femora were collected from healthy and "skinny" sheep and cattle. The bones were either frozen or subjected to 40°C heat; heated bones were either wrapped in plastic to minimize desiccation or were left unwrapped. Marrow fat percentage was determined at different time intervals by oven-drying, or by solvent extraction using hexane in manual equipment or a Soxhlet apparatus. Extraction was performed, where possible, on both wet and dried tissue. Multiple samples were tested from each bone. Bone marrow fat analysis using a manual, hexane-based extraction technique was found to be a moderately sensitive method of assessing antemortem body condition of cattle up to 6 d after death. Multiple replicates should be analyzed where possible. Samples from "skinny" sheep showed a different response to heat from those of "healthy" sheep; "skinny" samples were so reduced in quantity by day 6 (the first sampling day) that no individual testing could be performed. Further work is required to understand the response of sheep marrow.

  9. Determination of the force systems produced by different configurations of tear drop orthodontic loops

    Directory of Open Access Journals (Sweden)

    Guilherme Thiesen

    2013-04-01

    Full Text Available OBJECTIVE: To determine the mechanical characteristics of teardrop loop with and without helix fabricated using different metal alloy compositions (stainless steel and beta-titanium, submitted to different intensities of bends preactivation (0º and 40º, and with different cross-sectional dimension of the wire used to build these loops (0.017 x 0.025-in and 0.019 x 0.025-in. METHODS: Eighty loops used to close spaces were submitted to mechanical tests. The magnitudes of horizontal force, the moment/force ratio, and the load/deflection ratio produced by the specimens were quantified. Loops were submitted to a total activation of 5.0 mm and the values were registered for each 1.0 mm of activation. For statistic data analysis, a analysis of variance was performed and a Tukey's Multiple Comparison test was used as supplement, considering a 5% level of significance. RESULTS: In general, teardrop loops with helix produced lower magnitudes of horizontal force and load/deflection ratio, and higher moment/force ratio than teardrop loops without helix. Among all analyzed variables, metal alloy composition presented greater influence in the horizontal force and in the load/deflection ratio. The moment/force ratio showed to be more influenced by the preactivation of loops for space closure.

  10. Determination of equivalent breast phantoms for different age groups of Taiwanese women: An experimental approach

    International Nuclear Information System (INIS)

    Dong, Shang-Lung; Chu, Tieh-Chi; Lin, Yung-Chien; Lan, Gong-Yau; Yeh, Yu-Hsiu; Chen, Sharon; Chuang, Keh-Shih

    2011-01-01

    Purpose: Polymethylmethacrylate (PMMA) slab is one of the mostly used phantoms for studying breast dosimetry in mammography. The purpose of this study was to evaluate the equivalence between exposure factors acquired from PMMA slabs and patient cases of different age groups of Taiwanese women in mammography. Methods: This study included 3910 craniocaudal screen/film mammograms on Taiwanese women acquired on one mammographic unit. The tube loading, compressed breast thickness (CBT), compression force, tube voltage, and target/filter combination for each mammogram were collected for all patients. The glandularity and the equivalent thickness of PMMA were determined for each breast using the exposure factors of the breast in combination with experimental measurements from breast-tissue-equivalent attenuation slabs. Equivalent thicknesses of PMMA to the breasts of Taiwanese women were then estimated. Results: The average ± standard deviation CBT and breast glandularity in this study were 4.2 ± 1.0 cm and 54% ± 23%, respectively. The average equivalent PMMA thickness was 4.0 ± 0.7 cm. PMMA slabs producing equivalent exposure factors as in the breasts of Taiwanese women were determined for the age groups 30-49 yr and 50-69 yr. For the 4-cm PMMA slab, the CBT and glandularity values of the equivalent breast were 4.1 cm and 65%, respectively, for the age group 30-49 yr and 4.4 cm and 44%, respectively, for the age group 50-69 yr. Conclusions: The average thickness of PMMA slabs producing the same exposure factors as observed in a large group of Taiwanese women is less than that reported for American women. The results from this study can provide useful information for determining a suitable thickness of PMMA for mammographic dose survey in Taiwan. The equivalence of PMMA slabs and the breasts of Taiwanese women is provided to allow average glandular dose assessment in clinical practice.

  11. Determination of equivalent breast phantoms for different age groups of Taiwanese women: An experimental approach

    Energy Technology Data Exchange (ETDEWEB)

    Dong, Shang-Lung; Chu, Tieh-Chi; Lin, Yung-Chien; Lan, Gong-Yau; Yeh, Yu-Hsiu; Chen, Sharon; Chuang, Keh-Shih [Department of Biomedical Engineering and Environmental Sciences, National Tsing Hua University, 101 Section 2, Kuang-Fu Road, Hsinchu 30013, Taiwan (China); Department of Radiology, Cheng Hsin General Hospital, 45 Cheng Hsin Street, Pai-Tou District, Taipei 11220, Taiwan (China); Department of Medical Imaging and Radiological Sciences, Kaohsiung Medical University, 100 Shih-Chuan 1st Road, Kaohsiung 80708, Taiwan (China); Department of Biomedical Engineering and Environmental Sciences, National Tsing Hua University, 101 Section 2, Kuang-Fu Road, Hsinchu 30013, Taiwan (China)

    2011-07-15

    Purpose: Polymethylmethacrylate (PMMA) slab is one of the mostly used phantoms for studying breast dosimetry in mammography. The purpose of this study was to evaluate the equivalence between exposure factors acquired from PMMA slabs and patient cases of different age groups of Taiwanese women in mammography. Methods: This study included 3910 craniocaudal screen/film mammograms on Taiwanese women acquired on one mammographic unit. The tube loading, compressed breast thickness (CBT), compression force, tube voltage, and target/filter combination for each mammogram were collected for all patients. The glandularity and the equivalent thickness of PMMA were determined for each breast using the exposure factors of the breast in combination with experimental measurements from breast-tissue-equivalent attenuation slabs. Equivalent thicknesses of PMMA to the breasts of Taiwanese women were then estimated. Results: The average {+-} standard deviation CBT and breast glandularity in this study were 4.2 {+-} 1.0 cm and 54% {+-} 23%, respectively. The average equivalent PMMA thickness was 4.0 {+-} 0.7 cm. PMMA slabs producing equivalent exposure factors as in the breasts of Taiwanese women were determined for the age groups 30-49 yr and 50-69 yr. For the 4-cm PMMA slab, the CBT and glandularity values of the equivalent breast were 4.1 cm and 65%, respectively, for the age group 30-49 yr and 4.4 cm and 44%, respectively, for the age group 50-69 yr. Conclusions: The average thickness of PMMA slabs producing the same exposure factors as observed in a large group of Taiwanese women is less than that reported for American women. The results from this study can provide useful information for determining a suitable thickness of PMMA for mammographic dose survey in Taiwan. The equivalence of PMMA slabs and the breasts of Taiwanese women is provided to allow average glandular dose assessment in clinical practice.

  12. Optimized determination of the radiological inventory during different phases of decommissioning

    International Nuclear Information System (INIS)

    Hillberg, Matthias; Beltz, Detlef; Karschnick, Oliver

    2012-01-01

    The decommissioning of nuclear facilities comprises a lot of activities such as decontamination, dismantling and demolition of equipment and structures. For these activities the aspects of health and safety of the operational personnel and of the general public as well as the minimization of radioactive waste have to be taken into account. An optimized, comprehensible and verifiable determination of the radiological inventory is essential for the decommissioning management with respect to safety, time, and costs. For example: right from the start of the post operational phase, the radiological characterization has to enable the decision whether to perform a system decontamination or not. Furthermore it is necessary, e.g. to determine the relevant nuclides and their composition (nuclide vector) for the release of material and for sustaining the radiological health and safety at work (e. g. minimizing the risk of incorporation). Our contribution will focus on the optimization of the radiological characterization with respect to the requisite extent and the best instant of time during the decommissioning process. For example: which additional information, besides the history of operation, is essential for an adequate amount of sampling and measurements needed in order to determine the relevant nuclides and their compositions? Furthermore, the characterization of buildings requires a kind of a graded approach during the decommissioning process. At the beginning of decommissioning, only a rough estimate of the expected radioactive waste due to the necessary decontamination of the building structures is sufficient. With ongoing decommissioning, a more precise radiological characterization of buildings is needed in order to guarantee an optimized, comprehensible and verifiable decontamination, dismantling and trouble-free clearance. These and other examples will be discussed on the background of and with reference to different decommissioning projects involving direct

  13. Nutritional value of Brazilian distillers dried grains with solubles for pigs as determined by different methods

    Directory of Open Access Journals (Sweden)

    Anderson Corassa

    Full Text Available ABSTRACT The objective of this study was to determine the digestibility coefficient (DC of nutrients and the digestible energy (DE, and metabolizable energy (ME values of distillers dried grains with solubles (DDGS produced in Brazil by different methods. Eight barrows with 23.3±4.1 kg were housed in metabolic cages in a randomized block design and fed diets containing 0, 200, 400, and 600 g kg–1 of corn DDGS. We determined the digestibility of dry matter (DM, organic matter (OM, crude protein (CP, ether extract (EE, mineral matter (MM, neutral detergent fiber (NDF, and gross energy (GE by the total collection (TC and chromium oxide marker (Cr methods. Distillers dried grains with solubles provided the respective DM, OM, CP, EE, MM, NDF, and GE values of 910, 863, 286, 66.9, 46.8, 500 g kg–1, and 4,780 kcal kg–1. The DE and ME values of DDGS were 3,739 and 3,401 kcal kg–1 and 3,691 and 3,213 kcal kg–1 as determined by TC and Cr methods, respectively. The growing inclusion of DDGS did not affect the DE or ME values. The digestibility coefficients of DM, OM, CP, EE, MM, and NDF were 767, 765, 827, 691, 883, and 821 g kg–1, respectively, by the total collection method. The Cr underestimated the values of all variables compared with TC method. Levels up to 600 g kg–1 of the test ingredient do not influence the DE and ME of DDGS, but compromises the digestibility coefficients of DM, OM, and NDF.

  14. Determination of drying characteristics and quality properties of eggplant in different drying conditions

    Directory of Open Access Journals (Sweden)

    Gözde Bayraktaroglu Urun

    2015-12-01

    Full Text Available Drying is the most traditional process used for preserving eggplant a long time. The aim of this study was to determining drying characteristics and quality properties of eggplant dried by sun drying, hot air convective drying and infrared assisted convective drying. Convective drying and infrared assisted convective were carried out in a convective dryer at three different temperatures(40°, 50°, 60°C and air velocity at 5 m/s.The increasing of temperatures during the drying of eggplant led to a significant reduction of the drying time. However loss of nutrition was observed in eggplant samples dried at higher temperature.The biggest change in colour parameters was observed in samples dried with sun drying.So it was thought that sun drying had a negative effect on quality properties of eggplant samples.

  15. Comparison of different methods of determining plutonium content and isotopic composition

    International Nuclear Information System (INIS)

    Dowell, M.R.W.

    1985-05-01

    At Rockwell Hanford Operations, several different methods are used to determine plutonium content and isotopic composition. These include alpha particle energy analysis, calorimetry/gamma-ray analysis, mass spectrometry, and low energy ray assay. Each is used in a process control environment and has its advantages and disadvantages in terms of sample matrix, sample preparation, concentration, error ranges, detection limits, and turn around time. Of the methods discussed, special attention is paid to the Plutonium Isotopics Solution Counter, a low energy gamma ray assay system designed to provide plutonium and americium content and isotopic composition of Pu-238 through Pu-241 and Am-241. It is qualitatively and quantitatively compared to the other methods. A brief description of sample types which the Solution Counter analyzes is presented. 4 refs., 4 tabs

  16. Comparison of different methods of determining plutonium content and isotopic composition

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    At Rockwell Hanford Operations, several different methods are used to determine plutonium content and isotopic composition. These include alpha particle energy analysis, calorimetry/gamma-ray analysis, mass spectrometry, and low energy gamma-ray assay. Each is used in a process control environment and has its advantages and disadvantages in terms of sample matrix, sample preparation, concentration, error ranges, detection limits, and turn around time. Of the methods discussed, special attention is paid to the Plutonium Isotopics Solution Counter, a low energy gamma-ray assay system designed to provide plutonium and americium content and isotopic composition of Pu-238 through Pu-241 and Am-241. It is qualitatively and quantitatively compared to the other methods. A brief description of sample types which the Solution Counter analyzes is presented

  17. Settlement determination of operating moisture of autoclaved aerated concrete in different climatic zones

    Directory of Open Access Journals (Sweden)

    Pastushkov Pavel Pavlovich

    Full Text Available In the process of operation of buildings the moisture state of enveloping structures materials is changing depending on their construction features, properties of the material, temperature and moisture conditions in the premises, climatic conditions of the construction area. Moisture mode determines the operational properties of the enveloping structures of a building. It directly influences the thermal characteristics of enveloping structure and energy efficiency of the applied materials. The analysis of the methods for calculation of moisture behavior of enclosing structures is carried out. The research relevance of operational moisture of AAC is substantiated. Experimental studies and results of the sorption moisturizing and water vapor permeability of leading marks of aerated concrete are carried out. The authors offer the results of numerical calculations of the moisture behavior of aerated concrete in the walls with mark D400 with facade thermal insulation composite systems - with external plaster layers for different climatic zones of construction.

  18. Determination of inundation area in the Amazon River floodplain using the SMMR 37 GHz polarization difference

    International Nuclear Information System (INIS)

    Sippel, S.J.; Hamilton, S.K.; Melack, J.M.; Choudhury, B.J.

    1994-01-01

    The 37 GHz polarization difference observed by the Scanning Multichannel Microwave Radiometer (SMMR), which was operated on board the Nimbus-7 satellite, provides a sensitive indicator of surface water. These data can provide information on seasonal inundation patterns in large tropical wetlands such as the Amazon River floodplain. Although the SMMR data are of low resolution, we were able to estimate the area inundated within a group of pixels by using linear mixing models which incorporate the major end-members of the observed microwave signatures. The models were then used to estimate seasonal changes in inundation area over a 7-year period for a 34,550 km 2 area along the Amazon River near Manaus. The seasonal changes in inundation area determined using mixing models correlate well with changes in river stage. (author)

  19. Determination of acrolein, ethanol, volatile acidity, and copper in different samples of sugarcane spirits

    Directory of Open Access Journals (Sweden)

    José Masson

    2012-09-01

    Full Text Available Seventy-one samples of sugarcane spirits from small and average size stills produced in the northern and southern Minas Gerais (Brazil were analyzed for acrolein using HPLC (High Performance Liquid Chromatography. Ethanol and copper concentrations and volatile acidity were also determined according to methods established by the Ministry of Agriculture, Livestock and Supply (MAPA. A total of 9.85% of the samples tested showed levels of acrolein above the legal limits, while the copper concentrations of 21.00% of the samples and the volatile acidity of 8.85% of the samples were higher than the limits established by the Brazilian legislation. The concentration of acrolein varied from 0 to 21.97 mg.100 mL-1 of ethanol. However, no significant difference at 5% of significance was observed between the samples produced in the northern and southern Minas Gerais. The method used for determination of acrolein in sugarcane spirits involved the formation of a derivative with 2,4-dinitrophenylhydrazine (2,4-DNPH and subsequent analysis by HPLC.

  20. Determination of different contaminants in selective drinking water samples collected from Peshawar valley area

    International Nuclear Information System (INIS)

    Ihsanullah; Khan, M.; Khattak, T.N.; Sattar, A.

    1999-01-01

    Among the pollutants carried through sewage, industrial effluents, fertilizers, pesticides; heavy metals and various pathogenic bacteria are directly related to human/animal diseases. Samples of drinking water were collected from different locations, in the Peshawar area. Cadmium, lead and copper levels in these samples were determined by potentiometric stripping analysis (PSA). The data indicated wide variation in the concentration of these heavy metals. Variation in results is discussed on the basis of some possible sources of contamination. The concentration of cadmium and lead in all the samples was higher compared to the values given in the guideline of World Health Organization (WHO) for drinking water. Copper was below the detection limit in majority of the samples. The values of Cd, Pb and Cu were in the range of 0.023-2.75, 0.025-1.88 and 0-0.67 mg/1 respectively. Various physical quality indices (ph, electrical conductivity and total solids) and pathogenic bacteria (E. coli and total coliforms) were also determined in water samples. Most of the drinking waters was found contaminated with higher levels of Cd and Pb and pathogenic bacteria and hence, considered unfit for drinking purposes. (author)

  1. Antimicrobial resistance and resistance gene determinants in clinical Escherichia coli from different animal species in Switzerland.

    Science.gov (United States)

    Lanz, Roland; Kuhnert, Peter; Boerlin, Patrick

    2003-01-02

    Antimicrobial susceptibility testing was performed on a total of 581 clinical Escherichia coli isolates from diarrhea and edema disease in pigs, from acute mastitis in dairy cattle, from urinary tract infections in dogs and cats, and from septicemia in laying hens collected in Switzerland between 1999 and 2001. Among the 16 antimicrobial agents tested, resistance was most frequent for sulfonamides, tetracycline, and streptomycin. Isolates from swine presented significantly more resistance than those from the other animal species. The distribution of the resistance determinants for sulfonamides, tetracycline, and streptomycin was assessed by hybridization and PCR in resistant isolates. Significant differences in the distribution of resistance determinants for tetracycline (tetA, tetB) and sulfonamides (sulII) were observed between the isolates from swine and those from the other species. Resistance to sulfonamides could not be explained by known resistance mechanisms in more than a quarter of the sulfonamide-resistant and sulfonamide-intermediate isolates from swine, dogs and cats. This finding suggests that one or several new resistance mechanisms for sulfonamides may be widespread among E. coli isolates from these animal species. The integrase gene (intI) from class I integrons was detected in a large proportion of resistant isolates in association with the sulI and aadA genes, thus demonstrating the importance of integrons in the epidemiology of resistance in clinical E. coli isolates from animals.

  2. Spectral determination of individual rare earths in different classes of inorganic compounds

    International Nuclear Information System (INIS)

    Karpenko, L.I.; Fadeeva, L.A.; Shevchenko, L.D.

    1979-01-01

    The conditions are found allowing to analyze various inorganic compounds for rare-earth elements without separation from non-rare-earth components. The influence of the plasma composition on the intensity of spectral lines of rare-earth elements is studied. The relative intensity of homologous spectral lines of various rare-earth elements remains constant regardless of the plasma composition. The conditions are found for the determination of individual rare-earth elements acting as both alloying additives (Csub(n) -- n x 10 -1 -n x 10 -3 %), and basic components (up to tens of per cent) in different classes of inorganic compounds of 1-7 elements. The general method is developed for the determination of individual rare-earth elements in mixtures of oxides of rare-earth elements, complex fluorides of rare-earth elements and elements of group 2, gallates, borates, germanates, vanadates of rare-earth elements and aluminium; zirconates-titanates of lead and barium, containing modifying additives of rare-earth elements, complex chalcogenides of rare-earth elements and elements of group 5

  3. In vitro comparison of working length determination using three different electronic apex locators

    Directory of Open Access Journals (Sweden)

    Alper Kuştarci

    2014-01-01

    Full Text Available Background: The aim of this study was to compare the accuracy of the apex-locating functions of DentaPort ZX, Raypex 5 and Endo Master electronic apex locators (EALs in vitro. Materials and Methods: Thirty extracted human single-rooted teeth with mature apices were used for the study. The real working length (RWL was established by subtracting 0.5 mm from the actual root canal length. All teeth were mounted in an alginate model that was especially developed to test the EALs and the teeth were then measured with each EAL. The results were compared with the corresponding RWL, which was subtracted from the electronically determined distance. Data were analyzed using a paired-samples t-test, a Chi-square test and a repeated measure analysis of variance evaluation at the 0.05 level of significance. Results: Statistical analysis showed that no significant difference was found among all EALs (P > 0.05. Conclusion: The accuracy of the EALs was evaluated and all of the devices showed an acceptable determination of electronic working length between the ranges of ±0.5 mm.

  4. Assessment of the methods for determining net radiation at different time-scales of meteorological variables

    Directory of Open Access Journals (Sweden)

    Ni An

    2017-04-01

    Full Text Available When modeling the soil/atmosphere interaction, it is of paramount importance to determine the net radiation flux. There are two common calculation methods for this purpose. Method 1 relies on use of air temperature, while Method 2 relies on use of both air and soil temperatures. Nowadays, there has been no consensus on the application of these two methods. In this study, the half-hourly data of solar radiation recorded at an experimental embankment are used to calculate the net radiation and long-wave radiation at different time-scales (half-hourly, hourly, and daily using the two methods. The results show that, compared with Method 2 which has been widely adopted in agronomical, geotechnical and geo-environmental applications, Method 1 is more feasible for its simplicity and accuracy at shorter time-scale. Moreover, in case of longer time-scale, daily for instance, less variations of net radiation and long-wave radiation are obtained, suggesting that no detailed soil temperature variations can be obtained. In other words, shorter time-scales are preferred in determining net radiation flux.

  5. X-ray spectral determination by detection of radiation scattered at different angles

    International Nuclear Information System (INIS)

    Barrea, Raul; Mainardi, R.T.

    1987-01-01

    A precise knowledge of the spectral content of an X-ray beam is of fundamental importance in areas such as X-ray fluorescence analysis by absolute methods, radiodiagnosis, radiotherapy, computed tomography, etc. A simple practical method was developed to determine X-ray spectra emitted by X-ray tubes. It is based on the scattering of the beam on a solid target and detection of this radiation at different angles. This methodology can easily be adapted to the successive attenuation of the beam procedure. Numerical parameter values of a proposed analytical function for the energy spectrum are found measuring the radiation intensity with a suitable detector (ionization chamber or plastic scintillation detector) and equating it with the convolution integral of the proposed spectrum with the incoherent scattering function. This procedure of spectra determination is enclosed in the same group of those generically referred as successive modifications of the irradiation set up used in absolute methods of X-ray fluorescence analysis. (Author) [es

  6. Spectrophotometric determination of chlorthalidone in pharmaceutical formulations using different order derivative methods

    Directory of Open Access Journals (Sweden)

    Narmeen S. Abdullah

    2017-05-01

    Full Text Available Simple, repaid and accurate zero-, first- and second-order derivative spectrophotometric methods have been developed for determination of chlorthalidone (CLT in commercially available tablets. Normal spectrophotometric scan (zero order shows maximum absorbance at 276 nm in methanol solution and a good linearity in the range of 10.0–75.0 μg/mL. Linear relations using first (D1 and second (D2 order derivative methods were obtained at 278 and 288 nm for D1 and 286 and 292 nm for D2.The calibration curves were constructed in the range of 1.0–25.0 μg/mL for D1 (R = 0.998 and D2 (R = 0.999. Different analytical validations were determined (accuracy, precision, specificity, recovery, stability and robustness to demonstrate its suitability for routine quality control labs. All the developed methods were successfully applied to a tablet formulation and the results were compared statistically with each other and with those obtained by the HPLC reference method.

  7. Determination of the paraxial focal length using Zernike polynomials over different apertures

    Science.gov (United States)

    Binkele, Tobias; Hilbig, David; Henning, Thomas; Fleischmann, Friedrich

    2017-02-01

    The paraxial focal length is still the most important parameter in the design of a lens. As presented at the SPIE Optics + Photonics 2016, the measured focal length is a function of the aperture. The paraxial focal length can be found when the aperture approaches zero. In this work, we investigate the dependency of the Zernike polynomials on the aperture size with respect to 3D space. By this, conventional wavefront measurement systems that apply Zernike polynomial fitting (e.g. Shack-Hartmann-Sensor) can be used to determine the paraxial focal length, too. Since the Zernike polynomials are orthogonal over a unit circle, the aperture used in the measurement has to be normalized. By shrinking the aperture and keeping up with the normalization, the Zernike coefficients change. The relation between these changes and the paraxial focal length are investigated. The dependency of the focal length on the aperture size is derived analytically and evaluated by simulation and measurement of a strong focusing lens. The measurements are performed using experimental ray tracing and a Shack-Hartmann-Sensor. Using experimental ray tracing for the measurements, the aperture can be chosen easily. Regarding the measurements with the Shack-Hartmann- Sensor, the aperture size is fixed. Thus, the Zernike polynomials have to be adapted to use different aperture sizes by the proposed method. By doing this, the paraxial focal length can be determined from the measurements in both cases.

  8. Comparison of different testing methods for gas fired domestic boiler efficiency determination

    International Nuclear Information System (INIS)

    De Paepe, M.; T'Joen, C.; Huisseune, H.; Van Belleghem, M.; Kessen, V.

    2013-01-01

    As the Energy Performance of Buildings Directive is being implemented throughout the European Union, a clear need for certification of boiler and domestic heating devices has arisen. Several ‘Notified Bodies’ exist, spread around the different member states. They are acting as the notified body of that member state and focus on local certification. A boiler manufacturer has its equipment tested according to the ‘Boiler Efficiency directive 92/42/EC’. Recently, tests done by several notified bodies in sequence on an identical unit of a manufacturer showed that results could differ depending on which notified body performed the test. In cooperation with ‘Technigas’ (Notified Body in Belgium) a detailed study was done of the measurement setup and devices for determining boiler efficiencies. Several aspects were studied: measurement devices (absolute or differential types), their location within the test setup (focussing on accuracy and their overall impact on the result) and the measurement strategy (measuring on the primary or the secondary water side). The study was performed for both full load and part load scenarios of a gas fired domestic boiler (smaller than 70 kW [4]). The results clearly indicate that temperature measurements arecritical for assessing boiler efficiency. Secondly the test setup using secondary circuit measurements should be preferred. Tests were performed at ‘Technigas’ on different setups in order to validate the findings. - Highlights: ► Labelling of boiler is now obliged by European standards. ► Error propagation is analysed for different methods of boiler performance testing. ► Secondary water side measurement with separate calibration of has highest quality. ► A sensitivity analysis showed that the water temperatures are important factors.

  9. DETERMINATION OF BLOOD BIOCHEMICAL BASELINE VALUES IN THE OSTRICH AT DIFFERENT AGES

    International Nuclear Information System (INIS)

    ELSAYED, M.A.; FARGHALY, H.A.M.

    2008-01-01

    Sixty four ostrich birds from the breeding flock in Nuclear Research Center, AEA, Egypt (March 2008) aged from one week old until post-sexual maturity were used to determine blood biochemical baseline values. Blood was drawn from each bird of each group and blood hematological parameters such as total red blood cells (RBC), total white blood cells (WBC), hemoglobin concentration (Hb) and packed cell volume (PCV) percentage were determined. In addition, blood serum was separated to evaluate the concentrations of serum total protein (TP), albumin (Alb), globulin (Glob), calcium (Ca) and phosphorus (P). Liver function such a serum aspartate transaminase (AST) and alanine transaminase (ALT) were determined. Also, kidney function such as serum urea (U), creatinine (Cr) and uric acid (UA) were measured. Serum total cholesterol (Chol), triglycerides (Trg) and serum triiodothyronine (T 3 ) were determined. The results showed that:1- Hb and RBC were positively correlated with age and were significantly increased in males than females. There was non-significant difference in RBC between laying and non-laying birds, but Hb concentration was significantly increased in non-laying than laying birds. 2- WBC count was decreased in young birds than adult birds and it was significantly increased in adult females than males and in laying than non-laying birds. 3- PCV was positively correlated by age and it was increased in males than females and in non-laying than laying birds. 4- The concentrations of serum TP, Alb, Glob, Ca and P were increased as age increased and were increased in males than females and in non-laying than laying birds. 5- Serum T 3 hormone was positively correlated with age until two years old then decreased significantly. It was significantly increased in adult male than females and in laying than non-laying birds.6- Kidney function such as serum U, Cr and UA were increased in young than adult birds. It was decreased in adult females than males while it

  10. Relation between stability and resilience determines the performance of early warning signals under different environmental drivers.

    Science.gov (United States)

    Dai, Lei; Korolev, Kirill S; Gore, Jeff

    2015-08-11

    Shifting patterns of temporal fluctuations have been found to signal critical transitions in a variety of systems, from ecological communities to human physiology. However, failure of these early warning signals in some systems calls for a better understanding of their limitations. In particular, little is known about the generality of early warning signals in different deteriorating environments. In this study, we characterized how multiple environmental drivers influence the dynamics of laboratory yeast populations, which was previously shown to display alternative stable states [Dai et al., Science, 2012]. We observed that both the coefficient of variation and autocorrelation increased before population collapse in two slowly deteriorating environments, one with a rising death rate and the other one with decreasing nutrient availability. We compared the performance of early warning signals across multiple environments as "indicators for loss of resilience." We find that the varying performance is determined by how a system responds to changes in a specific driver, which can be captured by a relation between stability (recovery rate) and resilience (size of the basin of attraction). Furthermore, we demonstrate that the positive correlation between stability and resilience, as the essential assumption of indicators based on critical slowing down, can break down in this system when multiple environmental drivers are changed simultaneously. Our results suggest that the stability-resilience relation needs to be better understood for the application of early warning signals in different scenarios.

  11. Determination of heavy metals in the fruit of date palm growing at different locations of Riyadh.

    Science.gov (United States)

    Aldjain, Ibrahim M; Al-Whaibi, Mohamed H; Al-Showiman, Salim S; Siddiqui, Manzer H

    2011-04-01

    Exposure of heavy metals to human beings has risen dramatically in the last 50 years. In today's urban and industrial society, there is no escaping from exposure to toxic chemicals and heavy metals. Humans are more likely to be exposed to heavy metal contamination from the dust that adheres to edible plants than from bioaccumulation. This is because it is very difficult to wash off all the dust particles from the plant material before ingesting them. The objectives of this experiment were to determine the concentrations of lead (Pb) and cadmium (Cd) in washing residues and in the tissues of fruits of date palm growing in 14 sites of Riyadh and also to assess whether the fruits were safe for human consumption. The washing residues and tissue of date palm fruits collected from different sites showed the presence of significant amounts of the Pb and Cd. The concentration of Pb in the dust and fruit tissue increased with increasing anthropogenic sources. Therefore, fruits of date palm might be used as a pollution indicator; it might be recommend that fruits of date palm could be safe for human consumption after washing. The mean concentration of Pb and Cd in all the samples collected from different sites is within the safe limits recommended by FAO/WHO.

  12. Gender Differences in the Motivational Processing of Babies Are Determined by Their Facial Attractiveness

    Science.gov (United States)

    Yamamoto, Rinah; Ariely, Dan; Chi, Won; Langleben, Daniel D.; Elman, Igor

    2009-01-01

    Background This study sought to determine how esthetic appearance of babies may affect their motivational processing by the adults. Methodology and Principal Findings Healthy men and women were administered two laboratory-based tasks: a) key pressing to change the viewing time of normal-looking babies and of those with abnormal facial features (e.g., cleft palate, strabismus, skin disorders, Down's syndrome and fetal alcohol syndrome) and b) attractiveness ratings of these images. Exposure to the babies' images produced two different response patterns: for normal babies, there was a similar effort by the two groups to extend the visual processing with lower attractiveness ratings by men; for abnormal babies, women exerted greater effort to shorten the viewing time despite attractiveness ratings comparable to the men. Conclusions These results indicate that gender differences in the motivational processing of babies include excessive (relative to the esthetic valuation) motivation to extend the viewing time of normal babies by men vs. shortening the exposure to the abnormal babies by women. Such gender-specific incentive sensitization phenomenon may reflect an evolutionary-derived need for diversion of limited resources to the nurturance of healthy offspring. PMID:19554100

  13. Gender differences in the motivational processing of babies are determined by their facial attractiveness.

    Directory of Open Access Journals (Sweden)

    Rinah Yamamoto

    2009-06-01

    Full Text Available This study sought to determine how esthetic appearance of babies may affect their motivational processing by the adults.Healthy men and women were administered two laboratory-based tasks: a key pressing to change the viewing time of normal-looking babies and of those with abnormal facial features (e.g., cleft palate, strabismus, skin disorders, Down's syndrome and fetal alcohol syndrome and b attractiveness ratings of these images. Exposure to the babies' images produced two different response patterns: for normal babies, there was a similar effort by the two groups to extend the visual processing with lower attractiveness ratings by men; for abnormal babies, women exerted greater effort to shorten the viewing time despite attractiveness ratings comparable to the men.These results indicate that gender differences in the motivational processing of babies include excessive (relative to the esthetic valuation motivation to extend the viewing time of normal babies by men vs. shortening the exposure to the abnormal babies by women. Such gender-specific incentive sensitization phenomenon may reflect an evolutionary-derived need for diversion of limited resources to the nurturance of healthy offspring.

  14. Determination of 129I in low level radioactive waste by two different methods

    International Nuclear Information System (INIS)

    Szanto, Zs.; Szucs, Z.; Svingor, E.; Molnar, M.; Palcsu, L.; Futo, I.; Vajda, N.; Molnar, Zs.; Kabai, E.

    2001-01-01

    Determination of the physical, chemical and radiological properties of wastes intended for disposal in any radwaste repository represents one of the major goals of every country dealing with nuclear facilities. In most disposal facilities the long lived α- and β-emitting radionuclides have the most restrictive inventory limits, because they do not decay appreciably in the lifetime of the facility. One of the most restrictive radionuclides is 129 I, a fission product with long half- life, high mobility and biological hazard for the human body. The purpose of this paper is to present and to compare the 129 I results obtained by two different Institutes, using different measurement methods on a wide variety of low level radioactive waste streams generated at the Paks NPP. The Institute of Nuclear Technique of the Technical and Economical University of Budapest analyzed 129 I in a sequential scheme that included preconcentration, neutron activation, post-irradiation chemistry and counting of the shorter-lived 130 I activation product, while the Institute of Nuclear Research of the Hungarian Academy of Sciences used radiochemical separation followed by low-energy direct gamma-ray spectrometry. The results show a good correlation and prove the availability of both measurement methods.(author)

  15. The measurement of surface roughness to determine the suitability of different methods for stone cleaning

    International Nuclear Information System (INIS)

    Vazquez-Calvo, Carmen; Alvarez de Buergo, Monica; Fort, Rafael; Varas-Muriel, Maria Jose

    2012-01-01

    The roughness of stone surface was measured, before and after bead blasting-based cleaning methods, to select the most efficient one to be used in masonry and stonework of specific areas of the Cathedral of Segovia (Spain). These types of cleaning methods can, besides the removal of soiling and surface deposits, leave a rougher surface, which would mean higher and more rapid water retention and deposit accumulation due to a specific surface increase, therefore accelerating stone decay. Or, in contrast, the cleaning method can be so aggressive that it can smooth the surface by reducing its roughness, a fact that usually corresponds to excessive material removal—soot and deposits–-but also part of the stone substrate. Roughness results were complemented with scanning electron microscopy observations and analyses and colour measurements. Finally, it was possible to select the best cleaning method among the six that were analysed, for different areas and different stone materials. Therefore, this study confirms the measurement of surface roughness as a reliable test to determine the suitability of stone cleaning methods; it is a non-destructive technique, portable and friendly to use, which can help us to rapidly assess—together with other techniques—the efficacy and aggressiveness of the stone cleaning method. (paper)

  16. The Ability of Students’ Mathematical Proof in Determining the Validity of Argument Reviewed from Gender Differences

    Science.gov (United States)

    Feriyanto

    2018-01-01

    This research aims to describe the ability of students’ mathematical proof in determining the validity of argument reviewed from gender differences. The subjects of this research were one male and one female student of the fifth semester of Mathematic Education study program. The subjects were selected based on the highest mathematics ability which was assesed from their previous assignments and tests. In addition, the communication ability of the subjects was also considered in order to facilitate the researcher in conducting interviews. Based on the result of the test with direct and indirect proof, it could be concluded that the subjects were able to: 1) mention all facts/premises and write about what should be shown (conclusion) in direct proof and write additional premise in indirect proof; 2) connect facts/premises to concepts which must be mastered; 3) use equivalent concept to manipulate and organize the proof; 4) use the concept of syllogism and tollens mode to obtain the desired conclusion; 5) construct mathematical evidence systematically, and logically; 6) complement the reason for each step appropriately. The difference was that the male subject wrote the final conclusion, while the female subject did not write the final conclusion on the proof.

  17. Determination model for cetane number of biodiesel at different fatty acid composition: a review

    Directory of Open Access Journals (Sweden)

    Michal Angelovič

    2014-05-01

    Full Text Available The most accepted definition of biodiesel is stated at the EU technical regulation EN 14214 (2008 or in the USA in ASTM 6751-02. As a result of this highly strict description only methyl esters of fatty acids conform to these definitions, nevertheless the term ‘‘biodiesel’’ is spread out to other alkyl fatty esters. Some countries have adopted bioethanol for replacement of methanol in biodiesel transesterification and thus assuring a fully biological fuel. Of course, such position brings some problems in fulfilling technical requirements of EN 14214 or ASTM 6751-02. Biodiesel is actually a less complex mixture than petrodiesel, but different feedstock origins and the effect of seasonality may impose difficulties in fuel quality control. Since biodiesel is an alternative diesel fuel derived from the transesterification of triacylglycerol comprised materials, such as vegetable oils or animal fats, with simple alcohols to furnish the corresponding mono-alkyl esters, its composition depends on the raw material used, the cultivated area location, and harvest time. The choice of the raw material is usually the most important factor for fluctuations of biodiesel composition, because different vegetable oils and animal fats may contain different types of fatty acids. Important properties of this fuel vary significantly with the composition of the mixture. Cetane number, melting point, degree of saturation, density, cloud point, pour point, viscosity, and nitrogen oxides exhaust emission (NOx, for instance, deserve to be mentioned. One of the most important fuel quality indicators is the cetane number; however its experimental determination may be an expensive and lengthy task. To weaken situation concerning biodiesel, the availability of data in the literature is also scarce. In such scenario, the use of reliable models to predict the cetane number or any other essential characteristic may be of great utility. We reviewed available literature to

  18. Research on the Effectiveness of Different Estimation Algorithm on the Autonomous Orbit Determination of Lagrangian Navigation Constellation

    Directory of Open Access Journals (Sweden)

    Youtao Gao

    2016-01-01

    Full Text Available The accuracy of autonomous orbit determination of Lagrangian navigation constellation will affect the navigation accuracy for the deep space probes. Because of the special dynamical characteristics of Lagrangian navigation satellite, the error caused by different estimation algorithm will cause totally different autonomous orbit determination accuracy. We apply the extended Kalman filter and the fading–memory filter to determinate the orbits of Lagrangian navigation satellites. The autonomous orbit determination errors are compared. The accuracy of autonomous orbit determination using fading-memory filter can improve 50% compared to the autonomous orbit determination accuracy using extended Kalman filter. We proposed an integrated Kalman fading filter to smooth the process of autonomous orbit determination and improve the accuracy of autonomous orbit determination. The square root extended Kalman filter is introduced to deal with the case of inaccurate initial error variance matrix. The simulations proved that the estimation method can affect the accuracy of autonomous orbit determination greatly.

  19. Determining lethal dose of gamma radiation on different stages of Tribolium Cosmonauts H b s t

    International Nuclear Information System (INIS)

    Zolfagharieh, H.R.; Majd, F.; Torshyzie, M.; Babaie, M.

    1992-10-01

    Pest infestation causes great losses to stored grain through out the world. This is specially true in developing countries where the technology is less advanced, and climatic conditions are extremely favourable for the development of pests. Irradiation is on approved method of direct control for stored-product insect in wheat and wheat flour in many countries, and in dictation are that it will soon be approved for all grain, grain products and other dry food commodities. Radiation doses required to kill or sterilized the most important storage pests in all stages are known. However irradiation is very effective in preventing insect development and in producing sterility. A detailed analysis of the radiosensitivity of stored-product insects shows the different groups of pests have very different sensitivities and quarantine doses can be tailored to kill or sterilize the species of quarantine concern. The effect of irradiation on insects are many, and varied, depending primarily on the species, stage, age and physical factors. The aim is to survey the effect of gamma radiation on stored pest, which can categorized under following classes: 1-The effect of gamma radiation on different stages grow of tribolium castaneum (H B S T); 2-Determination of lethal doses.; 3-The study of gamma radiation on products. In summary these information indicated that fairly low dosages of gamma radiation could be used on commodities such as bulk grain in which some infestation by insect stages of irradiation would be required on products such package foods where hundred percent mortality must be obtain. (author)

  20. Determination of permeability coefficients of ophthalmic drugs through different layers of porcine, rabbit and bovine eyes.

    Science.gov (United States)

    Loch, Christian; Zakelj, Simon; Kristl, Albin; Nagel, Stefan; Guthoff, Rudolf; Weitschies, Werner; Seidlitz, Anne

    2012-08-30

    To treat ophthalmic diseases like glaucoma or inflammatory disorders topically applied ophthalmic formulations such as eye drops are usually used. In addition, novel ophthalmic implants releasing drug substances locally into different parts of the eye are available today. In the work presented here, the permeability coefficients of selected drugs (ciprofloxacin hydrochloride, lidocaine hydrochloride, timolol maleate) for ophthalmic tissues were determined using side-by-side diffusion chambers (so-called Ussing chambers). Sclera, conjunctiva, cornea, choroidea-retina-complex and a complex of conjunctiva-sclera-choroidea-retina were excised from fresh porcine, rabbit and bovine eyes. In the porcine eye tissues the highest P(app) values were obtained for conjunctiva with the exception of lidocaine. Therefore, it can be estimated that a certain amount of drug diffuses or is transported through conjunctiva after application. The P(app) values for sclera were also higher than those for cornea and even more, the surface area of sclera which is available for drug absorption is much larger than that of cornea when applying an implant. The obtained permeability coefficients for sclera and conjunctiva indicate that the administration of periocular implants can be an alternative to topically applied formulations. The complexes of the tissues were a significantly (p<0.01) stronger barrier to the investigated substances than the separated tissues. Distinct differences in permeability coefficients between the investigated animal tissues were observed. Overall the highest P(app) values for all mounted tissues were obtained with the rabbit, followed by porcine and bovine eyes. Because of these distinct interspecies differences one must be very careful when selecting the proper animal model for the permeability experiments. Copyright © 2012 Elsevier B.V. All rights reserved.

  1. Differences in gene expression of human xylosyltransferases and determination of acceptor specificities for various proteoglycans

    Energy Technology Data Exchange (ETDEWEB)

    Roch, Christina; Kuhn, Joachim; Kleesiek, Knut [Institut fuer Laboratoriums- und Transfusionsmedizin, Herz- und Diabeteszentrum NRW, Universitaetsklinik der Ruhr-Universitaet Bochum, 32545 Bad Oeynhausen (Germany); Goetting, Christian, E-mail: cgoetting@hdz-nrw.de [Institut fuer Laboratoriums- und Transfusionsmedizin, Herz- und Diabeteszentrum NRW, Universitaetsklinik der Ruhr-Universitaet Bochum, 32545 Bad Oeynhausen (Germany)

    2010-01-01

    The xylosyltransferase (XT) isoforms XT-I and XT-II initiate the posttranslational glycosaminoglycan (GAG) synthesis. Here, we determined the relative expression of both isoforms in 33 human cell lines. The majority of tested cell lines showed dominant XYLT2 gene expression, while only in 23132/87, JAR, NCI-H510A and THP-1 was the XT-I mRNA expression higher. Nearly equal expression levels were detected in six cell lines. Additionally, to shed light on putative differences in acceptor specificities the acceptor properties of potential acceptor sequences were determined. Peptides were expressed as glutathione-S-transferase fusion proteins containing putative or known GAG attachment sites of in vivo proteoglycans. Kinetic analysis showed that K{sub m} and V{sub max} values for XT-I mediated xylosylation were slightly higher than those for XT-II, and that XT-I showed a lesser stringency concerning the acceptor sequence. Mutagenesis of the bikunin peptide sequence in the G-S-G attachment site and flanking regions generated potential acceptor molecules. Here, mutations on the N-terminal side and the attachment site were found to be more susceptible to a loss of acceptor function than mutations in the C-terminus. Altogether the known consensus sequence a-a-a-a-G-S-G-a-a/G-a ('a' representing Asp or Glu) for XT-I mediated xylosylation could be approved and additionally extended to apply to XT-II as well.

  2. Different Chromatographic Methods for Simultaneous Determination of Mefenamic Acid and Two of Its Toxic Impurities.

    Science.gov (United States)

    Morcoss, Martha M; Abdelwahab, Nada S; Ali, Nouruddin W; Elsaady, Mohammed T

    2017-08-01

    Two sensitive, accurate and precise chromatographic methods mentioned as TLC-densitometric method and RP-HPLC-DAD method, were developed and validated for the simultaneous determination of mefenamic acid (MEF) and its two toxic impurities, benzoic acid (BA) and 2,3-dimethylaniline (DMA). In the proposed TLC-densitometric method a developing system consisting of chloroform:acetone:acetic acid:ammonia solution(70:30:2:2, v/v/v/v) was used, TLC aluminum plates 60 F254 was used as a stationary phase and the separated bands were UV-scanned at 225 nm. While the proposed RP-HPLC-DAD method depended on chromatographic separation on C18 column using 0.05 M KH2PO4 buffer: acetonitrile (40:60, v/v) as a mobile phase at constant flow rate of 1 mL/min with UV detection at 225 nm. Linear relationships were obtained in the ranges of 0.3-2, 0.3-2 and 0.3-1.8 μg/band (for TLC-densitometric method) and in the ranges of 7-50, 10-50 and 7-50 μg/mL (for HPLC-DAD method) for MEF, BA and DMA, respectively. Factors affecting the developed methods have been studied and optimized. Moreover ,the proposed methods were successfully applied for determination of the studied drug in its pharmaceutical dosage form. The methods showed no significance difference when compared with the reported method using F-test and Student's-t test. The low of detection and quantization limits of the proposed methods get them suitable for quality control and stability studies of MEF in pharmaceutical formulation. The developed methods have advantages of being more selective and sensitive than the published methods. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  3. Determination of total triterpenoid acids in different part and extract of Ganoderma lucidum

    Directory of Open Access Journals (Sweden)

    FENG Huiqin

    2013-04-01

    Full Text Available Aim To develop a method for determination of total triterpenoid acids in different part and extracts of Ganoderma lucidum. Method The samples of Ganoderma lucidum were extracted with ethanol and successively extracted with CHCl3 and 5% NaHCO3,the NaHCO3 layer was acidified to pH 3 with 2 mol/L HCl,the resulting precipitates were dissolved in CHCl3 and evaporated in vacuo then weighed. The total triterpenoid acids were obtained. Result The total triterpenoid acids of Ganoderma lucidum fruitbody,spore and mycelium were (8.58±0.25 mg/g,(3.48±0.03 mg/g and (1.75 ±0.09 mg/g respectively. The total triterpenoid acids of pileus and stipe were (12.62±0.22 mg/g and (7.66±0.08 mg/g. The range of total triterpenoid acid content among 10 batches of Ganoderma lucidum fruitbody purchased from the market was between 4.34 to 16.39 mg/g. The highest content fro/8/8/88/ m Ganoderma lucidum fruiting body with alcohol - water extracting was (208.70±5.54 mg/g and the lowest content with alkaline solution extracting was (123.07±4.99 mg/g. The composition of total triterpenoid acid from fruitbody,spores and extract of fruitbody analyzed by HPLC were almost the same. This method is reliable for determination of total triterpenoid acid in the fruiting body and its extracts,spore and mycelium from Ganoderma lucidum,which provides an indicator for the quality of Ganoderma lucidum product.

  4. Determining Y-STR mutation rates in deep-routing genealogies: Identification of haplogroup differences.

    Science.gov (United States)

    Claerhout, Sofie; Vandenbosch, Michiel; Nivelle, Kelly; Gruyters, Leen; Peeters, Anke; Larmuseau, Maarten H D; Decorte, Ronny

    2018-05-01

    Knowledge of Y-chromosomal short tandem repeat (Y-STR) mutation rates is essential to determine the most recent common ancestor (MRCA) in familial searching or genealogy research. Up to now, locus-specific mutation rates have been extensively examined especially for commercially available forensic Y-STRs, while haplogroup specific mutation rates have not yet been investigated in detail. Through 450 patrilineally related namesakes distributed over 212 deep-rooting genealogies, the individual mutation rates of 42 Y-STR loci were determined, including 27 forensic Y-STR loci from the Yfiler ® Plus kit and 15 additional Y-STR loci (DYS388, DYS426, DYS442, DYS447, DYS454, DYS455, DYS459a/b, DYS549, DYS607, DYS643, DYS724a/b and YCAIIa/b). At least 726 mutations were observed over 148,596 meiosis and individual Y-STR mutation rates varied from 2.83 × 10 -4 to 1.86 × 10 -2 . The mutation rate was significantly correlated with the average allele size, the complexity of the repeat motif sequence and the age of the father. Significant differences in average Y-STR mutations rates were observed when haplogroup 'I & J' (4.03 × 10 -3 mutations/generation) was compared to 'R1b' (5.35 × 10 -3 mutations/generation) and to the overall mutation rate (5.03 × 10 -3 mutations/generation). A difference in allele size distribution was identified as the only cause for these haplogroup specific mutation rates. The haplogroup specific mutation rates were also present within the commercially available Y-STR kits (Yfiler ® , PowerPlex ® Y23 System and Yfiler ® Plus). This observation has consequences for applications where an average Y-STR mutation rate is used, e.g. tMRCA estimations in familial searching and genealogy research. Copyright © 2018 Elsevier B.V. All rights reserved.

  5. Nitrogen turnover of three different agricultural soils determined by 15N triple labelling

    Science.gov (United States)

    Fiedler, Sebastian R.; Kleineidam, Kristina; Strasilla, Nicol; Schlüter, Steffen; Reent Köster, Jan; Well, Reinhard; Müller, Christoph; Wrage-Mönnig, Nicole

    2017-04-01

    To meet the demand for data to improve existing N turnover models and to evaluate the effect of different soil physical properties on gross nitrogen (N) transformation rates, we investigated two arable soils and a grassland soil after addition of ammonium nitrate (NH4NO3), where either ammonium (NH4+), or nitrate (NO3-), or both pools have been labelled with 15N at 60 atom% excess (triple 15N tracing method). Besides NH4+, NO3- and nitrite (NO2-) contents with their respective 15N enrichment, nitrous oxide (N2O) and dinitrogen (N2) fluxes have been determined. Each soil was adjusted to 60 % of maximum water holding capacity and pre-incubated at 20˚ C for two weeks. After application of the differently labelled N fertilizer, the soils were further incubated at 20˚ C under aerobic conditions in a He-N2-O2 atmosphere (21 % O2, 76 He, 2% N2) to increase the sensitivity of N2 rates via the 15N gas flux method. Over a 2 week period soil N pools were quantified by 2 M KCl extraction (adjusted to pH 7 to prevent nitrite losses) (Stevens and Laughlin, 1995) and N gas fluxes were measured by gas chromatography in combination with IRMS. Here, we present the pool sizes and fluxes as well as the 15N enrichments during the study. Results are discussed in light of the soil differences that were responsible for the difference in gross N dynamics quantified by the 15N tracing model Ntrace (Müller et al., 2007). References Müller, C., T. Rütting, J. Kattge, R.J. Laughlin, and R.J. Stevens, (2007) Estimation of parameters in complex 15N tracing models by Monte Carlo sampling. Soil Biology & Biochemistry. 39(3): p. 715-726. Stevens, R.J. and R.J. Laughlin, (1995) Nitrite transformations during soil extraction with potassium chloride. Soil Science Society of America Journal. 59(3): p. 933-938.

  6. Determining potential pregnancy status differences based on a new method of yearling heifer prebreeding examination.

    Science.gov (United States)

    Monday, Jessica D; Larson, Robert L; Laflin, Shelie; White, Brad J; Theurer, Miles E

    2018-01-01

    The study objective was to evaluate the Ready-Intermediate-Problem (RIP) replacement heifer evaluation matrix's ability to classify heifers into groups with differing reproductive outcomes. Beef heifers (n = 341) from six Kansas herds were classified according to RIP matrix guidelines and then exposed to AI breeding, bull breeding, or a combination of both as per the management plans for each participating herd. Following the breeding season the heifers were evaluated to determine pregnancy status, AI pregnancy status, days bred, and the number of 21 day cycles needed during the breeding season to become pregnant. After the breeding season, 298 (87%) of the heifers were pregnant, 204 (68%) of which became pregnant in the first 21 days of the breeding season. There was a significant interaction (P = 0.01) in RIP classification and pregnancy by 21 day cycle. Ready classified heifers had a significantly greater risk of becoming pregnant after a single AI exposure (P = 0.03) and in the first 21-day cycle (P = 0.02) compared to Problem classified heifers, and significantly less risk of being non-pregnant at the end of the breeding season (P < 0.01) compared to Problem classified heifers. The RIP matrix can be useful for classifying heifers prior to the onset of the breeding season. Further research is needed to evaluate the matrix in other settings and populations of U.S. beef heifers as well as at different intervals between evaluation and the start of breeding season. Copyright © 2017 Elsevier Inc. All rights reserved.

  7. Determining the minimally important difference for the Oral Health Impact Profile-20.

    LENUS (Irish Health Repository)

    Allen, P Finbarr

    2009-04-01

    In the context of clinical trials, measurement of change is critical. The aim of this study was to determine the minimally important difference (MID) for the Oral Health Impact Profile-20 (OHIP-20) when used with partially dentate patients undergoing treatment that included the provision of removable partial dentures. In a prospective clinical trial, 51 consecutive patients were provided with removable partial dentures. In addition to demographic and dental status data, patients completed an OHIP-20 prior to treatment. One month postoperatively, patients completed a post-treatment OHIP-20 and a global transition scale. Domains assessed in the global transition scale were appearance, ability to chew food, oral comfort, and speech. The MID for the OHIP-20 was calculated using the anchor-based approach. From the initial sample of 51 patients, 44 completed post-treatment questionnaires and were included in the analysis. Change scores in the four transition domains indicated that new dentures had a positive impact in the majority of subjects, especially in perceived impact on chewing and appearance. The study provided a guideline as to what constitutes the MID for the OHIP-20. This benchmark can be used when interpreting the impact of clinical intervention for replacing missing teeth and for power calculation in statistical analyses.

  8. Levels of Essential Elements in Different Medicinal Plants Determined by Using Inductively Coupled Plasma Mass Spectrometry

    Directory of Open Access Journals (Sweden)

    Eid I. Brima

    2018-01-01

    Full Text Available The objective of this study was to investigate the content of essential elements in medicinal plants in the Kingdom of Saudi Arabia (KSA. Five different medical plants (mahareeb (Cymbopogon schoenanthus, sheeh (Artemisia vulgaris, harjal (Cynanchum argel delile, nabipoot (Equisetum arvense, and cafmariam (Vitex agnus-castus were collected from Madina city in the KSA. Five elements Fe, Mn, Zn, Cu, and Se were determined by using inductively coupled plasma mass spectrometry (ICP-MS. Fe levels were the highest and Se levels were the lowest in all plants. The range levels of all elements in all plants were as follows: Fe 193.4–1757.9, Mn 23.6–143.7, Zn 15.4–32.7, Se 0.13–0.92, and Cu 11.3–21.8 µg/g. Intakes of essential elements from the medical plants in infusion were calculated: Fe 4.6–13.4, Mn 6.7–123.2, Zn 7.0–42.7, Se 0.14–1.5, and Cu 1.5–5.0 µg/dose. The calculated intakes of essential elements for all plants did not exceed the daily intake set by the World Health Organization (WHO and European Food Safety Authority (EFSA. These medicinal plants may be useful sources of essential elements, which are vital for health.

  9. Application of different spectrophotometric methods for simultaneous determination of elbasvir and grazoprevir in pharmaceutical preparation

    Science.gov (United States)

    Attia, Khalid A. M.; El-Abasawi, Nasr M.; El-Olemy, Ahmed; Abdelazim, Ahmed H.

    2018-01-01

    The first three UV spectrophotometric methods have been developed of simultaneous determination of two new FDA approved drugs namely; elbasvir and grazoprevir in their combined pharmaceutical dosage form. These methods include simultaneous equation, partial least squares with and without variable selection procedure (genetic algorithm). For simultaneous equation method, the absorbance values at 369 (λmax of elbasvir) and 253 nm (λmax of grazoprevir) have been selected for the formation of two simultaneous equations required for the mathematical processing and quantitative analysis of the studied drugs. Alternatively, the partial least squares with and without variable selection procedure (genetic algorithm) have been applied in the spectra analysis because the synchronous inclusion of many unreal wavelengths rather than by using a single or dual wavelength which greatly increases the precision and predictive ability of the methods. Successfully assay of the drugs in their pharmaceutical formulation has been done by the proposed methods. Statistically comparative analysis for the obtained results with the manufacturing methods has been performed. It is noteworthy to mention that there was no significant difference between the proposed methods and the manufacturing one with respect to the validation parameters.

  10. Determination of the Wetting Angle of Germanium and Germanium-Silicon Melts on Different Substrate Materials

    Science.gov (United States)

    Kaiser, Natalie; Croell, Arne; Szofran, F. R.; Cobb. S. D.; Dold, P.; Benz, K. W.

    1999-01-01

    During Bridgman growth of semiconductors detachment of the crystal and the melt meniscus has occasionally been observed, mainly under microgravity (microg) conditions. An important factor for detached growth is the wetting angle of the melt with the crucible material. High contact angles are more likely to result in detachment of the growing crystal from the ampoule wall. In order to achieve detached growth of germanium (Ge) and germanium-silicon (GeSi) crystals under 1g and microg conditions, sessile drop measurements were performed to determine the most suitable ampoule material as well as temperature dependence of the surface tension for GeSi. Sapphire, fused quartz, glassy carbon, graphite, SiC, pyrolytic Boron Nitride (pBN), AIN, and diamond were used as substrates. Furthermore, different cleaning procedures and surface treatments (etching, sandblasting, etc.) of the same substrate material and their effect on the wetting behavior were studied during these experiments. pBN and AIN substrates exhibited the highest contact angles with values around 170 deg.

  11. Determination of Different Saccharides Concentration by Means of a Multienzymes Amperometric Biosensor

    Directory of Open Access Journals (Sweden)

    Marianna Portaccio

    2017-01-01

    Full Text Available A three-electrode amperometric biosensor for the detection of two different saccharides (lactose and glucose in aqueous solutions is described. On the graphite working electrode, the glucose oxidase (GOD and β-galactosidase (β-gal were coimmobilized by means of covalent bonding. The response of the biosensor as a function of the relative concentration of the two immobilized enzymes was investigated and the best working conditions were identified by measuring the sensitivity and the linear range response. In particular, our best lactose biosensor shows a linear range up to 0.010 mM and a limit of detection (LOD and a sensitivity equal to 0.001 mM and 850 ± 81 μA/mM, respectively. For glucose, the values of the above-mentioned parameters are equal to 0.015 mM for the linear range, 0.001 mM for LOD, and 505 ± 55 μA/mM for the sensitivity. The working parameters of our biosensors are significant in comparison with other biosensors developed for concentration determination of the two saccharides investigated in the present work. In particular, low (LOD and high sensitivities are obtained for lactose and glucose. To challenge our biosensor with real samples, it was tested using fruit juices, skim milk, and whey.

  12. Radiation trapping in atomic absorption spectroscopy at lead determination in different matricies

    International Nuclear Information System (INIS)

    El-Gohary, Z.

    2005-01-01

    The determination of lead by flame atomic absorption analysis in the presence of Sn and Fe atoms and different matrices such as OH and SO 3 was investigated with the objective of understanding the spectral interference processes at the analytical lines 283.31 nm for a wide range of concentration. The radiation trapping factor was interpreted and evaluated assuming Voigt distribution of the atomic and rotational lines in the flame. The radiation trapping factor was increased by increasing the number density (plasma of the absorbing medium is optically thick). In plasma, there is a certain point of equilibrium between the trapping and the escaping of radiation, which is relevant to 50% of absorption. The spectral background interference can cause a variation of the number density at equilibrium point as a result of the degree of overlap with the analytical line. The spectral background interference can be easily avoided by using another resonance absorption line for the analysis. The chemical modification of the matrix is applied to minimize the interference effect. Nitric acid, ammonium nitrate and magnesium nitrate are most commonly recommended as matrix modifiers

  13. Different Stability-Indicating Chromatographic Techniques for the Determination of Netobimin

    Science.gov (United States)

    Ramadan, Nesrin K.; Mohamed, Afaf O.; Shawky, Sara E.; Salem, Maissa Y.

    2012-01-01

    Two simple, accurate, and sensitive methods were developed for the determination of netobimin in the presence of its degradation product. Method (A) was an HPLC method, performed on C18 column using acetonitrile/methanol/0.01 M potassium dihydrogen phosphate (56 : 14 : 30 by volume) as a mobile phase with a flow rate of 0.5 mL/min. Detection was performed at 254 nm. Method (B) was a TLC method, using silica gel 60 F254 plates; the optimized mobile phase was toluene/methanol/chloroform/ammonium hydroxide (5 : 4 : 6 : 0.1 by volume). The spots were scanned densitometrically at 346 nm. Linearity ranges were 1–10 μg/mL for method (A) and 0.5–5 μg/band for method (B), and the mean percentage recoveries were 99.3 ± 0.7% and 99.7 ± 0.7% for methods (A) and (B), respectively. The proposed methods were found to be specific for netobimin in the presence of up to 90% of its degradation product. Statistical comparison between the results obtained by these methods and the manufacturer method was done, and no significance difference was obtained. PMID:22567566

  14. Different Stability-Indicating Chromatographic Techniques for the Determination of Netobimin

    Directory of Open Access Journals (Sweden)

    Nesrin K. Ramadan

    2012-01-01

    Full Text Available Two simple, accurate, and sensitive methods were developed for the determination of netobimin in the presence of its degradation product. Method (A was an HPLC method, performed on C18 column using acetonitrile/methanol/0.01 M potassium dihydrogen phosphate (56 : 14 : 30 by volume as a mobile phase with a flow rate of 0.5 mL/min. Detection was performed at 254 nm. Method (B was a TLC method, using silica gel 60 F254 plates; the optimized mobile phase was toluene/methanol/chloroform/ammonium hydroxide (5 : 4 : 6 : 0.1 by volume. The spots were scanned densitometrically at 346 nm. Linearity ranges were 1–10 μg/mL for method (A and 0.5–5 μg/band for method (B, and the mean percentage recoveries were 99.3±0.7% and 99.7±0.7% for methods (A and (B, respectively. The proposed methods were found to be specific for netobimin in the presence of up to 90% of its degradation product. Statistical comparison between the results obtained by these methods and the manufacturer method was done, and no significance difference was obtained.

  15. Determining the Minimal Clinically Important Difference for Six-Minute Walk Distance in Fibromyalgia

    Science.gov (United States)

    Kaleth, Anthony S.; Slaven, James E.; Ang, Dennis C.

    2016-01-01

    Objective To estimate the minimal clinically important difference (MCID) for 6-minute walk distance (6MWD) in patients with fibromyalgia (FM). Design Data from a recently completed trial that included 187 patients who completed the 6-minute walk test, Fibromyalgia Impact Questionnaire (FIQ), and Short-Form 36 (SF36) at 12 and 36 weeks were used to examine longitudinal changes in 6MWD. An anchor-based approach that used linear regression analyses was used to determine the MCID for 6MWD, using the total FIQ score (FIQ-Total) and SF36-physical function domain (SF36-PF) as clinical anchors. Results The mean (SD) change in 6MWD from baseline to week 36 was 34.4 (65.2) m (pFIQ and SF36-PF, respectively. These MCID’s correspond with clinically meaningful improvements in FIQ (14% reduction) and SF36-PF (10 point increase). Conclusion The MCID for 6MWD in patients with FM was 156 to 167 m. These findings provide the first evidence of the change in 6MWD that is perceived by patients to be clinically meaningful. Further research using other MCID calculation methods is needed to refine estimates of the MCID for 6MWD in patients with FM. PMID:27003201

  16. Determining the Minimal Clinically Important Difference for 6-Minute Walk Distance in Fibromyalgia.

    Science.gov (United States)

    Kaleth, Anthony S; Slaven, James E; Ang, Dennis C

    2016-10-01

    The aim of this study was to estimate the minimal clinically important difference (MCID) for 6-min walk distance (6MWD) in patients with fibromyalgia. Data from a recently completed trial that included 187 patients who completed the 6-min walk test, Fibromyalgia Impact Questionnaire (FIQ), and Short-Form 36 (SF36) at 12 and 36 wks were used to examine longitudinal changes in 6MWD. An anchor-based approach that used linear regression analyses was used to determine the MCID for 6MWD, using the total FIQ score (FIQ-Total) and SF36-physical function domain as clinical anchors. The mean (SD) change in 6MWD from baseline to week 36 was 34.4 (65.2) m (P FIQ and SF36-physical function domain, respectively. These MCIDs correspond with clinically meaningful improvements in FIQ (14% reduction) and SF36-physical function domain (10-point increase). The MCID for 6MWD in patients with fibromyalgia was 156 to 167 m. These findings provide the first evidence of the change in 6MWD that is perceived by patients to be clinically meaningful. Further research using other MCID calculation methods is needed to refine estimates of the MCID for 6MWD in patients with fibromyalgia.

  17. Determination of Cardinal Temperatures and Germination Respond to Different Temperature for Five Lawns Cultivars

    Directory of Open Access Journals (Sweden)

    hadi khavari

    2017-08-01

    Full Text Available Introduction: Germination of every plant species respond to temperature variation in particular way. Germination is critical stage in plant life cycle. Seed germination is a complex biological process that is influenced by various environmental and genetic factors. The effects of temperature on plant development are the basis for models used to predict the timing of germination. Estimation of the cardinal temperatures, including base, optimum, and maximum, is essential because rate of development increases between base and optimum, decreases between optimum and maximum, and ceases above the maximum and below the base temperatures. Usually, a linear increase in germination rate is associated with an increase in temperature from base temperature (Tb to an optimum. An increase of temperature from the optimum will reduce the germination rate to zero. To determine the best planting date for plants, it is necessary to find the base (Tb, optimum (To and maximum temperatures (Tc for seed germination. These are known as cardinal temperatures. Modelling of seed germination is considered an effective approach to determining cardinal temperatures for most plant species, although these methods have some limitations due to unpredictable biological changes. The results of fitting mechanical models are useful for evaluating seed quality, germination rate, germination percentage, germination uniformity and seed performance under different environmental stresses such as salinity, drought, and freezing. Regression models incorporating more parameters can produce more precise estimates. Cardinal temperature was determined using segmented and logistic models in millet varieties and seedling emergence of wheat. In the dent-like model at lower-than-optimum temperature, a linear relationship holds between temperature and germination rate. This relationship remains linear at higher-than-optimum temperatures, but with a reducing trend. With increasing temperature

  18. Determining Need for School-Based Physical Therapy Under IDEA: Commonalities Across Practice Guidelines.

    Science.gov (United States)

    Vialu, Carlo; Doyle, Maura

    2017-10-01

    The Individuals with Disabilities Education Act (IDEA) includes physical therapy (PT) as a related service that may be provided to help students with disabilities benefit from their education. However, the IDEA does not provide specific guidance for the provision of school-based PT, resulting in variations in practice across the United States. The authors examined 22 state and local education agency guidelines available online to find commonalities related to the determination of a student's need for PT. Seven commonalities found: educational benefit, team decision, need for PT expertise, establishment of Individualized Education Program (IEP) goal before determining need for PT, distinction between medical and educational PT, the student's disability adversely affects education, and the student's potential for improvement. These commonalities are discussed in relation to current PT and special education literature. This article suggests applying these commonalities as procedural requirements and questions for discussion during an IEP team meeting.

  19. Comparison of two different methods for the determination of erythrocyte sedimentation rate

    Directory of Open Access Journals (Sweden)

    Gülfer Öztürk

    2014-09-01

    Full Text Available Objective: Erythrocyte Sedimentation Rate (ESR can be used for the follow-up of number of diseases. In recent years, closed automated systems that measure ESR directly from a capped EDTA and citrate blood sample tube have been developed. In this study, we aimed to compare and evaluate the consistence of assay results of iSed Alcor Auto-instrument and Berkhun SDM60 Auto-instrument. Methods: K2EDTA and citrated blood samples were taken from 149 randomly selected outpatients. The ESR of blood samples in tubes containing K2EDTA was determined by iSed Alcor Auto-instrument whereas Berkhun SDM60 Auto-instrument was used to determine the ESR of blood samples in tubes containing citrate. Results: The mean ± SD ESR was 24.48 ± 23.10 mm/hr (95% CI for the mean was 20.54–28.02 mm/hr for iSed Alcor Auto-instrument and 23.94 ± 17.24 mm/hr (95% CI for the mean was 21.15–26.73 mm/hr for the Berkhun Auto-instrument. We found the mean difference between two methods as 0.336 mm/hr (95% CI for the mean was −2.06 to 1.39 mm/hr; P = 0.701. The obtained correlation coefficient was 0.90 (P = 0.0001. There was no evidence of systemic bias, equal to 0.3 mm/hr (limits of agreement, –20.6 to 21.2 mm/hr. Conclusion: iSed Alcor Auto-instrument and Berkhun SDM60 Auto-instrument might be used as alternative systems each other. However, it should be monitored carefully in especially high ESR (>50 mm/hr results and the results should be checked according to the Westergren method. J Clin Exp Invest 2014; 5 (3: 371-375

  20. Reproducibility of MRI-Determined Proton Density Fat Fraction Across Two Different MR Scanner Platforms

    Science.gov (United States)

    Kang, Geraldine H.; Cruite, Irene; Shiehmorteza, Masoud; Wolfson, Tanya; Gamst, Anthony C.; Hamilton, Gavin; Bydder, Mark; Middleton, Michael S.; Sirlin, Claude B.

    2016-01-01

    Purpose To evaluate magnetic resonance imaging (MRI)-determined proton density fat fraction (PDFF) reproducibility across two MR scanner platforms and, using MR spectroscopy (MRS)-determined PDFF as reference standard, to confirm MRI-determined PDFF estimation accuracy. Materials and Methods This prospective, cross-sectional, crossover, observational pilot study was approved by an Institutional Review Board. Twenty-one subjects gave written informed consent and underwent liver MRI and MRS at both 1.5T (Siemens Symphony scanner) and 3T (GE Signa Excite HD scanner). MRI-determined PDFF was estimated using an axial 2D spoiled gradient-recalled echo sequence with low flip-angle to minimize T1 bias and six echo-times to permit correction of T2* and fat-water signal interference effects. MRS-determined PDFF was estimated using a stimulated-echo acquisition mode sequence with long repetition time to minimize T1 bias and five echo times to permit T2 correction. Interscanner reproducibility of MRI determined PDFF was assessed by correlation analysis; accuracy was assessed separately at each field strength by linear regression analysis using MRS-determined PDFF as reference standard. Results 1.5T and 3T MRI-determined PDFF estimates were highly correlated (r = 0.992). MRI-determined PDFF estimates were accurate at both 1.5T (regression slope/intercept = 0.958/−0.48) and 3T (slope/intercept = 1.020/0.925) against the MRS-determined PDFF reference. Conclusion MRI-determined PDFF estimation is reproducible and, using MRS-determined PDFF as reference standard, accurate across two MR scanner platforms at 1.5T and 3T. PMID:21769986

  1. Ion-Selective Electrodes for the Potentiometric Determination of Pramoxine HCl Using Different Ionophores.

    Science.gov (United States)

    Ramadan, Nesrin K; Merey, Hanan A

    2012-12-01

    Four novel pramoxine HCl (PAM) selective electrodes were investigated with 2-nitrophenyl octylether as a plasticiser in a polymeric matrix of polyvinyl chloride (PVC). Sensor 1 was fabricated using sodium-tetraphenylborate (TPB) as an anionic exchanger without incorporation of an ionophore. Sensor 2 used 2-hydroxy propyl -cyclodextrin as an ionophore, while sensors 3 and 4 were constructed using 4-sulfocalix-6-arene and 4-sulfocalix-8-arene respectively as ionophores. Linear responses of PAM within the concentration ranges of 1.0 × 10-4 to 1.0 × 10-2 mol L-1 and 1.0 × 10-5 to 1.0 × 10-2 mol L-1 were obtained using sensors 1 and 2, respectively and 1.0 × 10-6 to 1.0 × 10-2 mol L-1 were obtained using sensors 3 and 4. Nernstian slopes of 50.4 ± 0.6, 54.3 ± 0.8, 56.3 ± 0.3 and 59.1 ± 0.5 mV/decade over the pH range of 3.0-6.0 were observed. The selectivity coefficients of the developed sensors indicated excellent selectivity for PAM. The utility of 2-hydroxy- propylcyclodextrin (2HP-β-CD) and 4-sulfocalix [6,8] arene (SC 6, 8) as ionophores had a significant influence on increasing the membrane sensitivity and selectivity of sensors 2, 3 and 4 compared to sensor 1. The proposed sensors displayed useful analytical characteristics for the determination of PAM in bulk powder, pharmaceutical formulation, and in biological fluid. Validation of the method showed the suitability of the proposed electrodes for the use in the quality control assessment of the drug. Furthermore, statistical comparison between the results obtained by the proposed method and the official method of the drug was performed and no significant difference was found.

  2. Ideological and organizational components of differing public health strategies for addressing the social determinants of health.

    Science.gov (United States)

    Raphael, Dennis; Brassolotto, Julia; Baldeo, Navindra

    2015-12-01

    Despite a history of conceptual contributions to reducing health inequalities by addressing the social determinants of health (SDH), Canadian governmental authorities have struggled to put these concepts into action. Ontario's-Canada's most populous province-public health scene shows a similar pattern. In statements and reports, governmental ministries, professional associations and local public health units (PHUs) recognize the importance of these issues, yet there has been varying implementation of these concepts into public health activity. The purpose of this study was to gain insight into the key features responsible for differences in SDH-related activities among local PHUs. We interviewed Medical Officers of Health (MOH) and key staff members from nine local PHUs in Ontario varying in SDH activity as to their understandings of the SDH, public health's role in addressing the SDH, and their units' SDH-related activities. We also reviewed their unit's documents and their organizational structures in relation to acting on the SDH. Three clusters of PHUs are identified based on their SDH-related activities: service-delivery-oriented; intersectoral and community-based; and public policy/public education-focused. The two key factors that differentiate PHUs are specific ideological commitments held by MOHs and staff and the organizational structures established to carry out SDH-related activities. The ideological commitments and the organizational structures of the most active PHUs showed congruence with frameworks adopted by national jurisdictions known for addressing health inequalities. These include a structural analysis of the SDH and a centralized organizational structure that coordinates SDH-related activities. © The Author (2014). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  3. Determination of Twenty Organophosphorus Pesticides in Wheat Samples from Different Regions of Iran

    Directory of Open Access Journals (Sweden)

    Attaollah Shakoori *

    2017-09-01

    Full Text Available Background: Organophosphorus pesticides are widely used in agriculture, homes, gardens, and veterinary practices. Extensive application of pesticides in agriculture often results in residues of these compounds being absorbed into the foods, including wheat. The aim of this study was to evaluate the residue levels of 20 organophosphorus pesticides in wheat samples collected from different regions of Iran. Methods: This research reports a rapid, specific and sensitive multiresidue method based on the Quick Easy Cheap Effective Rugged and Safe (QuEChERS sample preparation method and gas chromatography with mass spectrometric detection in the selected ion monitoring mode (GC–SIM–MS to evaluate 20 organophosphorus pesticides in wheat samples. Results: In the concentration range of 20-200 ng/g, the calibration curves for each analyte was linear with a determination coefficient (R2 of 0.993 to 0.999. The limits of detection (LODs and quantitation (LOQs were between 2.5-6.7 and 7.5-20 ng/g, respectively. The mean recoveries obtained for three fortification levels (25, 50 and 100 ng/g, five replicates each were 80-114% with a satisfactory precision (RSD<20%. 31.1% samples contained residues of one or more target compounds. Chlorpyrifos was the most common residue (17.8%, followed by pirimiphos-methyl (6.7%, diazinon (4.4%, chlorpyrifos-methyl (1.1% and malathion (1.1%. Conclusion: Among the detected pesticides, only diazinon and malathion are permitted pesticides for wheat production in Iran. However, their concentrations were below the maximum residue levels (MRLs established by the Iranian National Standard Organization (INSO.

  4. Iodide-assisted total lead measurement and determination of different lead fractions in drinking water samples.

    Science.gov (United States)

    Zhang, Yuanyuan; Ng, Ding-Quan; Lin, Yi-Pin

    2012-07-01

    Lead and its compounds are toxic and can harm human health, especially the intelligence development in children. Accurate measurement of total lead present in drinking water is crucial in determining the extent of lead contamination and human exposure due to drinking water consumption. The USEPA method for total lead measurement (no. 200.8) is often used to analyze lead levels in drinking water. However, in the presence of high concentration of the tetravalent lead corrosion product PbO(2), the USEPA method was not able to fully recover particulate lead due to incomplete dissolution of PbO(2) particles during strong acid digestion. In this study, a new procedure that integrates membrane separation, iodometric PbO(2) measurement, strong acid digestion and ICP-MS measurement was proposed and evaluated for accurate total lead measurement and quantification of different lead fractions including soluble Pb(2+), particulate Pb(II) carbonate and PbO(2) in drinking water samples. The proposed procedure was evaluated using drinking water reconstituted with spiked Pb(2+), spiked particulate Pb(II) carbonate and in situ formed or spiked PbO(2). Recovery tests showed that the proposed procedure and the USEPA method can achieve 93-112% and 86-103% recoveries respectively for samples containing low PbO(2) concentrations (0.018-0.076 mg Pb per L). For samples containing higher concentrations of PbO(2) (0.089-1.316 mg Pb per L), the USEPA method failed to meet the recovery requirement for total lead (85-115%) while the proposed method can achieve satisfactory recoveries (91-111%) and differentiate the soluble Pb(2+), particulate Pb(II) carbonate and PbO(2).

  5. Radiochemical separation and alpha-spectrometric determination of Americium in different matrixes

    International Nuclear Information System (INIS)

    Radenkovic, M.; Joksic, J.; Paligoric, D.

    2009-01-01

    A method of separation and alpha-spectrometric determination of americium, developed in VINCA Institute of Nuclear Sciences is described in the paper. The procedure is convenient to be used for 241 Am determination in environmental matrixes as well as samples of human origin if a very small concentrations are expected, using 243 Am as a tracer for radiochemical yield recovery. (author) [sr

  6. Methods for Determining the Advertising Budget and its Distribution in Different Media

    OpenAIRE

    Serban Comanescu Adrian

    2014-01-01

    The process of determining and establishing the necessary advertising budget is approached based on the situations that precede it. There will be virtually no easy task for marketers, with the risk overvaluation or undervaluation of the budget. To avoid broader range of situations, the company uses specific tools and methods for determining the advertising budget. An advertising budget is established for each product.

  7. Environmental determinants of different blood lead levels in children: a quantile analysis from a nationwide survey.

    Science.gov (United States)

    Etchevers, Anne; Le Tertre, Alain; Lucas, Jean-Paul; Bretin, Philippe; Oulhote, Youssef; Le Bot, Barbara; Glorennec, Philippe

    2015-01-01

    Blood lead levels (BLLs) have substantially decreased in recent decades in children in France. However, further reducing exposure is a public health goal because there is no clear toxicological threshold. The identification of the environmental determinants of BLLs as well as risk factors associated with high BLLs is important to update prevention strategies. We aimed to estimate the contribution of environmental sources of lead to different BLLs in children in France. We enrolled 484 children aged from 6months to 6years, in a nationwide cross-sectional survey in 2008-2009. We measured lead concentrations in blood and environmental samples (water, soils, household settled dusts, paints, cosmetics and traditional cookware). We performed two models: a multivariate generalized additive model on the geometric mean (GM), and a quantile regression model on the 10th, 25th, 50th, 75th and 90th quantile of BLLs. The GM of BLLs was 13.8μg/L (=1.38μg/dL) (95% confidence intervals (CI): 12.7-14.9) and the 90th quantile was 25.7μg/L (CI: 24.2-29.5). Household and common area dust, tap water, interior paint, ceramic cookware, traditional cosmetics, playground soil and dust, and environmental tobacco smoke were associated with the GM of BLLs. Household dust and tap water made the largest contributions to both the GM and the 90th quantile of BLLs. The concentration of lead in dust was positively correlated with all quantiles of BLLs even at low concentrations. Lead concentrations in tap water above 5μg/L were also positively correlated with the GM, 75th and 90th quantiles of BLLs in children drinking tap water. Preventative actions must target household settled dust and tap water to reduce the BLLs of children in France. The use of traditional cosmetics should be avoided whereas ceramic cookware should be limited to decorative purposes. Copyright © 2014 Elsevier Ltd. All rights reserved.

  8. Determination of Partition coefficients for a Mixture of Volatile Organic Compounds in Rats and Humans at Different Life Stages

    National Research Council Canada - National Science Library

    Mahle, Deidre A; Gearhart, Jeffrey M; Godfrey, Richard J; Mattie, David R; Cook, Robert S; Grisby, Claude C

    2004-01-01

    .... Partition coefficients (PCs) are an integral component of pharmacokinetic models and determining differences in tissue partitioning of volatile organic chemicals across life stages can help reduce the uncertainty in risk assessment...

  9. Determinants of regional differences in lung cancer mortality in The Netherlands

    NARCIS (Netherlands)

    Kunst, A. E.; Looman, C. W.; Mackenbach, J. P.

    1993-01-01

    Although regional differences in lung cancer mortality are likely to be attributable to regional differences in tobacco smoking, studies in various countries found only weak relationships. This paper aimed at explaining regional differences in lung cancer mortality in the Netherlands. In a first

  10. Determinants of regional differences in lung cancer mortality in the Netherlands

    NARCIS (Netherlands)

    A.E. Kunst (Anton); C.W.N. Looman (Caspar); J.P. Mackenbach (Johan)

    1993-01-01

    textabstractAlthough regional differences in lung cancer mortality are likely to be attributable to regional differences in tobacco smoking, studies in various countries found only weak relationships. This paper aimed at explaining regional differences in lung cancer mortality in the

  11. Determinants of day-night difference in blood pressure, a comparison with determinants of daytime and night-time blood pressure.

    Science.gov (United States)

    Musameh, M D; Nelson, C P; Gracey, J; Tobin, M; Tomaszewski, M; Samani, N J

    2017-01-01

    Blunted day-night difference in blood pressure (BP) is an independent cardiovascular risk factor, although there is limited information on determinants of diurnal variation in BP. We investigated determinants of day-night difference in systolic (SBP) and diastolic (DBP) BP and how these compared with determinants of daytime and night-time SBP and DBP. We analysed the association of mean daytime, mean night-time and mean day-night difference (defined as (mean daytime-mean night-time)/mean daytime) in SBP and DBP with clinical, lifestyle and biochemical parameters from 1562 adult individuals (mean age 38.6) from 509 nuclear families recruited in the GRAPHIC Study. We estimated the heritability of the various BP phenotypes. In multivariate analysis, there were significant associations of age, sex, markers of adiposity (body mass index and waist-hip ratio), plasma lipids (total and low-density lipoprotein cholesterol and triglycerides), serum uric acid, alcohol intake and current smoking status on daytime or night-time SBP and/or DBP. Of these, only age (P=4.7 × 10 -5 ), total cholesterol (P=0.002), plasma triglycerides (P=0.006) and current smoking (P=3.8 × 10 -9 ) associated with day-night difference in SBP, and age (P=0.001), plasma triglyceride (P=2.2 × 10 -5 ) and current smoking (3.8 × 10 -4 ) associated with day-night difference in DBP. 24-h, daytime and night-time SBP and DBP showed substantial heritability (ranging from 18-43%). In contrast day-night difference in SBP showed a lower heritability (13%) while heritability of day-night difference in DBP was not significant. These data suggest that specific clinical, lifestyle and biochemical factors contribute to inter-individual variation in daytime, night-time and day-night differences in SBP and DBP. Variation in day-night differences in BP is largely non-genetic.

  12. Validation of different spectrophotometric methods for determination of vildagliptin and metformin in binary mixture

    Science.gov (United States)

    Abdel-Ghany, Maha F.; Abdel-Aziz, Omar; Ayad, Miriam F.; Tadros, Mariam M.

    New, simple, specific, accurate, precise and reproducible spectrophotometric methods have been developed and subsequently validated for determination of vildagliptin (VLG) and metformin (MET) in binary mixture. Zero order spectrophotometric method was the first method used for determination of MET in the range of 2-12 μg mL-1 by measuring the absorbance at 237.6 nm. The second method was derivative spectrophotometric technique; utilized for determination of MET at 247.4 nm, in the range of 1-12 μg mL-1. Derivative ratio spectrophotometric method was the third technique; used for determination of VLG in the range of 4-24 μg mL-1 at 265.8 nm. Fourth and fifth methods adopted for determination of VLG in the range of 4-24 μg mL-1; were ratio subtraction and mean centering spectrophotometric methods, respectively. All the results were statistically compared with the reported methods, using one-way analysis of variance (ANOVA). The developed methods were satisfactorily applied to analysis of the investigated drugs and proved to be specific and accurate for quality control of them in pharmaceutical dosage forms.

  13. Determination of the slow crack growth susceptibility coefficient of dental ceramics using different methods.

    Science.gov (United States)

    Gonzaga, Carla Castiglia; Cesar, Paulo Francisco; Miranda, Walter Gomes; Yoshimura, Humberto Naoyuki

    2011-11-01

    This study compared three methods for the determination of the slow crack growth susceptibility coefficient (n) of two veneering ceramics (VM7 and d.Sign), two glass-ceramics (Empress and Empress 2) and a glass-infiltrated alumina composite (In-Ceram Alumina). Discs (n = 10) were prepared according to manufacturers' recommendations and polished. The constant stress-rate test was performed at five constant stress rates to calculate n(d) . For the indentation fracture test to determine n(IF) , Vickers indentations were performed and the crack lengths were measured under an optical microscope. For the constant stress test (performed only for d.Sign for the determination of n(s) ) four constant stresses were applied and held constant until the specimens' fracture and the time to failure was recorded. All tests were performed in artificial saliva at 37°C. The n(d) values were 17.2 for Empress 2, followed by d.Sign (20.5), VM7 (26.5), Empress (30.2), and In-Ceram Alumina (31.1). In-Ceram Alumina and Empress 2 showed the highest n(IF) values, 66.0 and 40.2, respectively. The n(IF) values determined for Empress (25.2), d.Sign (25.6), and VM7 (20.1) were similar. The n(s) value determined for d.Sign was 31.4. It can be concluded that the n values determined for the dental ceramics evaluated were significantly influenced by the test method used. 2011 Wiley Periodicals, Inc.

  14. Deoxyriboside determination and cytofluorometric test in rats at different points of time after radiation exposure

    International Nuclear Information System (INIS)

    Aleksandrov, S.N.; Bazanova, N.V.; Prokudina, E.A.; Safronova, V.G.; Yagunov, A.S.

    1976-01-01

    Whole-body X- or γ-irradiation with doses ranging from 200 to 400 rad is easily identifiable in rats within the succeeding days by determining the deoxyriboside level in blood and urine because of the almost linear correlation between the change of concentration and the dose level in the range under consideration. Within 4 weeks postirradiation the dose received may also be determined by measuring the intensity of ultraviolet fluorescence of the peripheral blood leukocytes. Subsequently, only a qualitative distinction between exposed and unexposed animals was still possible by means of this test up to the end of the investigation period. (author)

  15. Analysis of different inputs share and determination of energy Indices in broilers production in Mashhad city

    Directory of Open Access Journals (Sweden)

    H Sadrnia

    2017-05-01

    Full Text Available Introduction The high energy consumption is one of the serious problems in poultry industry. The poultry industry consume about five percent of total energy sources in different countries, with consideration of losses, it increases up to 16-20%. In the year 2003 also, the Iranian chicken meat consumption per capita was 13.3 kg, while in the year 2013 it increased to 25.9 kg (FAO, 2014. It shows that in the diet of Iranian people, the chicken meat has become a strategic food. Poultry industry is one of the biggest and most developed industries in Iran. In the past two decays, mainly due to population growth and increase demand of white meats, it is necessary to change and improve energy efficiency in this industry. Technical efficiency of broiler farms in the central region of Saudi Arabia was analyzed through stochastic frontier approach (Alrwis and Francis, 2003. They reported that many farms under study work lower than their total capacity. In the research, the output was chicken meat weight in the term of the kilogram per one period and the inputs were the number of chicks, feed, the total of all variable expenses and fixed input except chicks and feed and the total cost of fixed inputs including building, equipment and machinery used for the broiler houses. They found that the small and large size broiler farms in the Central Region of Saudi Arabia were produced chicken with mean technical efficiency 83 and 88%, respectively (Alrwis and Francis, 2003. Efficiency measurement of broiler production units in Hamadan province was investigated by Fotros and Solgi (2003. They reported that the minimum, maximum and mean technical efficiency under variable return to scale were 12.7, 100 and 64.4%, respectively. Their results showed that technical efficiency at 16.5 (14 units and 42.35% (24 units of farms were more than 90 and 70%, respectively (Fotros and Salgi, 2003. Khorasan Razavi province after Esfahan and Mazandaran provinces is the third

  16. Gender differences in stress response: Role of developmental and biological determinants

    Directory of Open Access Journals (Sweden)

    Rohit Verma

    2011-01-01

    Full Text Available Stress response is associated with manifestations of various psychosomatic and psychiatric disorders. Hence, it is important to understand the underlying mechanisms that influence this association. Moreover, men and women tend to react differently with stress-both psychologically and biologically. These differences also need to be studied in order to have a better understanding in the gender difference observed for many disorders, which are likely to be contributed by the gender difference in stress reactivity and responses. Such an understanding would have a significant impact on our understanding about how adult health is set during early life and how adult disease could be prevented in men and women.

  17. Application of immunoaffinity columns for different food item samples preparation in micotoxins determination

    Directory of Open Access Journals (Sweden)

    Ćurčić Marijana

    2016-01-01

    Full Text Available In analytical methods used for monitoring of what special attention is paid to sample preparation. Therefore, the objective of this study was testing the efficiency of immunoaffinity columns (IAC that are based on solid phase extraction principles used for samples preparation in determining aflatoxins and ochratoxins. Aflatoxins and ochratoxins concentrations were determined in totally 56 samples of food items: wheat, corn, rice, barley and other grains (19 samples, flour and flour products from grain and additives for the bakery industry (7 samples, fruits and vegetables (3 samples, hazelnut, walnut, almond, coconut flour (4 samples, roasted cocoa beans, peanuts, tea, coffee (16 samples, spices (4 samples and meat and meat products (4 samples. Obtained results indicate advantage of IAC use for sample preparation based on enhanced specificity due to binding of extracted molecules to incorporated specific antibodies and rinsing the rest molecules from sample which could interfere with further analysis. Additional advantage is the usage of small amount of organic solvents and consequently decreased exposure of staff who conduct micotoxins determination. Of special interest is increase in method sensitivity since limit of quantification for aflatoxins and ochratoxins determination method is lower than maximal allowed concentration of these toxines prescribed by national rule book.

  18. On the difference between optically and electrically determined resistivity of ultra-thin titanium nitride films

    NARCIS (Netherlands)

    Van Hao, B.; Kovalgin, Alexeij Y.; Wolters, Robertus A.M.

    2013-01-01

    This work reports on the determination and comparison of the resistivity of ultra-thin atomic layer deposited titanium nitride films in the thickness range 0.65–20 nm using spectroscopic ellipsometry and electrical test structures. We found that for films thicker than 4 nm, the resistivity values

  19. Hydrodynamic radii of polyethylene glycols in different solvents determined from viscosity measurements

    NARCIS (Netherlands)

    Dohmen-Speelmans, M.P.J.; Pereira, A.M.; Timmer, J.M.K.; Benes, N.E.; Keurentjes, J.T.F.

    2008-01-01

    The hydrodynamic radius, rh, of low molar mass polyethylene glycol, MPEG = (200 to 1000) g·mol-1, in a homologous series of primary alcohols, acetone, and toluene has been determined from viscosity measurements. The viscosity data have been collected using a fast one-point method as well as a more

  20. Economic Education in the Middle East: Are the Determinants of Success in Introductory Economics Any Different?

    Science.gov (United States)

    Kherfi, Samer

    2008-01-01

    The author examines the determinants of success in introductory microeconomics, in the context of a Middle Eastern society but within an American educational setting. The data set is rich and covers over 3,500 students in one regional campus, allowing control for a wide range of student and class characteristics, one of which, nationality, is…

  1. Chinese and American Children's Perceptions of Popularity Determinants: Cultural Differences and Behavioral Correlates

    Science.gov (United States)

    Li, Yan; Xie, Hongling; Shi, Junqi

    2012-01-01

    The present study aimed to investigate cultural construction of children's perceptions of popularity determinants using a cross-cultural approach. This study examined 327 Chinese and 312 American fifth-graders' perceptions of what individual characteristics and peer relationships would make a peer popular. Consistent with cultural emphases,…

  2. Major differences between human atopic dermatitis and murine models as determined by global transcriptomic profiling

    DEFF Research Database (Denmark)

    Ewald, David Adrian; Noda, Shinji; Oliva, Margeaux

    2017-01-01

    , and a comparison of these models with the human AD transcriptomic fingerprint is lacking. We sought to evaluate the transcriptomic profiles of six common murine models and determine how they relate to human AD skin. Transcriptomic profiling was performed using microarrays and qRT-PCR on biopsies from NC/Nga, flaky...

  3. Determination of very small contents of boron by pH difference measurement

    International Nuclear Information System (INIS)

    Boehm, H.; Kirmse, E.M.; Schilbach, U.

    1983-01-01

    For the determination of boron as a trace element for food of plants in a very complicated salt matrix an analytical proceeding was developed, which allows to determine the content of boron without separation. The principle of analysis is based on the esterification of boric acid with a multivalent alcohol, which leeds to a monovalent strong complex acid. The change of the pH value of the analysing solution is measured. From the initial pH number, the end pH number, the volume of the analysing solution and the ionic product of water corresponding with the operating temperature the quantity of boric acid of boron that is equivalent the produced quantity of H + -ions is calculated by means of a linear program. The standard deviation of analytical proceeding amounts to 13.9 ng B. For the determination of the contents of boron of an unknown sample, five to ten separate measurements are carried out. For solutions, which are about 1x10 -6 M of boric acid, there are necessary 10 ml of sample for each separate measurement. The confidence interval of analytical results is found to be between +- 0.5 and +- 15.5% (P=0.99). For the determination of the content of boron in plant materials about 50-100 mg of dry weight are necessary. (Author)

  4. FIBER OPTIC IMMUNOSENSORS BASED ON ENHANCED CHEMILUMINESCENCE AND THEIR APPLICATION TO DETERMINE DIFFERENT ANTIGENS

    NARCIS (Netherlands)

    STARODUB, NF; ARENKOV, PJ; STARODUB, AN; BEREZIN, VA

    The main scheme of the cell for measuring as well as the sensor device itself, the analysis conditions and the results of quantitative determination of several antigens such as estradiol-17, alpha-2-interferon, chorionic honadotropine, antibodies to the influenza virus, total IgG and cells of

  5. Different approaches to synovial membrane volume determination by magnetic resonance imaging: manual versus automated segmentation

    DEFF Research Database (Denmark)

    Østergaard, Mikkel

    1997-01-01

    Automated fast (5-20 min) synovial membrane volume determination by MRI, based on pre-set post-gadolinium-DTPA enhancement thresholds, was evaluated as a substitute for a time-consuming (45-120 min), previously validated, manual segmentation method. Twenty-nine knees [rheumatoid arthritis (RA) 13...

  6. Determination of Pre-Service Science Teachers' Level of Awareness of Environmental Ethics in Relation to Different Variables

    Science.gov (United States)

    Keles, Özgül; Özer, Nilgün

    2016-01-01

    The purpose of the current study is to determine the pre-service science teachers' awareness levels of environmental ethics in relation to different variables. The sampling of the present study is comprised of 1,023 third and fourth year pre-service science teachers selected from 12 different universities in the spring term of 2013-2014 academic…

  7. Determining The Factors Affecting Fruit Hardness of Different Peach Types with Meta Analysis

    Directory of Open Access Journals (Sweden)

    Hande Küçükönder

    2014-09-01

    Full Text Available The aim of this study is to determine the factor effective in determining the hardness of Caterina, Suidring, Royal Glory and Tirrenia peach types using meta analysis. In the study, the impact force (Fi and the contact time (tc were detected and the impulse values (I that are expressed as independent variable in the area under the curve were calculated in the measurements performed using the technique of a low-mass lateral impactor multiplicated with peach. Using the theory of elasticity, the independent variables were determined as Fmax (maximum impact force, contact time (tmax, Fmax/tmax, 1/tmax, 1/tmax2,5, Fmax/tmax 1.25 and Fmax2.5 parameters. The correlation coefficient values showing the relationship between these parameters and the dependent variable Magness-Taylor force (MT were calculated and were combined with meta-analysis by using the Hunter-Schmid and Fisher’s Z methods. The Cohen’s classification criterion was used in evaluating the resulting mean effect size (combined correlation value and in determining its direction. As a result of the meta-analysis, the mean effect size according to Hunter-Schmid method was found 0.436 (0.371-0.497 positively directed in 95% confidence interval, while it was found 0.468 (0.390-0.545 according to Fisher’s Z method. The effect sizes in both methods were determined “mid-level” according to the Cohen’s classification. When the significance level of the studies was analyzed with the Z test, all of the ones that taken into the meta analysis has been found statistically significant. As a result of the meta analysis in this study evaluating the relationship of peach types with the fruit hardness, the mean effect size has been found to reach “strong level”. Consequently, “maximum shock acceleration” was found to be a more effective factor comparing to the other factors in determining the the fruit hardness according to the results of meta analysis applied in both methods.

  8. Quenched and first unquenched lattice HQET determination of the Bs-meson width difference

    Science.gov (United States)

    Giménez, V.; Reyes, J.

    2001-03-01

    We present recent results for the prediction of the B0s- overlineB0s lifetime difference from lattice Heavy Quark Effective Theory simulations. In order to get a next-to-leading order result we have calculated the matching between QCD and HQET and the two-loop anomalous dimensions in the HQET for all the Δ B=2 operators, in particular for the operators which enter the width difference. We present results from quenched and, for the first time, from unquenched simulations. We obtain for the B0s- overlineB0s lifetime difference, ? and ? from the quenched and unquenched simulations respectively.

  9. Calculation method in activation analysis for determination of two different radionuclides with almost the same γ-energy

    DEFF Research Database (Denmark)

    Szabo, A. S.

    1985-01-01

    The method is based on the difference of the half-lives of two dififerent radionuclides, having similar γ-energies. Using the method it is possible to determine the two components in the peaks also in that cases, if the difference between the energies is less, than the energy resolution of the de......The method is based on the difference of the half-lives of two dififerent radionuclides, having similar γ-energies. Using the method it is possible to determine the two components in the peaks also in that cases, if the difference between the energies is less, than the energy resolution...... of the detector. The main point is the perform only one irradiation, but use two different clock times before counting. The criterion of the method can be used when there is significant difference between the half-lives of the radionuclides....

  10. Determination of Uranium plus Plutonium by Alpha spectrometry in different matrix

    International Nuclear Information System (INIS)

    Equillor, Hugo E.; Campos, Juan M.

    2011-01-01

    Usually, the determination of alpha emitters by alpha spectrometry is performed with a prior purification of each of the elements to be quantified. In this work, a methodology for the determination of uranium and plutonium isotopes as jointly described, in order to improve analytical processing times and measurement. The method includes purifying uranium and plutonium, and the subsequent electrodeposition for alpha spectrometry measurement. The technique is based on the use of TBP (tributyl phosphate) as extractant and easy to obtain reactants. It is applicable to various matrices, including water, filters and soils. In the conditions described, is applied to small aliquots of approximately 0.5 g of solid. The technique produces high quality electrodeposits. (authors) [es

  11. Translation efficiency determines differences in cellular infection among dengue virus type 2 strains

    International Nuclear Information System (INIS)

    Edgil, Dianna; Diamond, Michael S.; Holden, Katherine L.; Paranjape, Suman M.; Harris, Eva

    2003-01-01

    We have investigated the molecular basis for differences in the ability of natural variants of dengue virus type 2 (DEN2) to replicate in primary human cells. The rates of virus binding, virus entry, input strand translation, and RNA stability of low-passage Thai and Nicaraguan and prototype DEN2 strains were compared. All strains exhibited equivalent binding, entry, and uncoating, and displayed comparable stability of positive strand viral RNA over time in primary cells. However, the low-passage Nicaraguan isolates were much less efficient in their ability to translate viral proteins. Sequence analysis of the full-length low-passage Nicaraguan and Thai viral genomes identified specific differences in the 3' untranslated region (3'UTR). Substitution of the different sequences into chimeric RNA reporter constructs demonstrated that the changes in the 3'UTR directly affected the efficiency of viral translation. Thus, differences in infectivity among closely related DEN2 strains correlate with efficiency of translation of input viral RNA

  12. Evaluation of Blue Value in different plant materials as a tool for rapid starch determination

    Directory of Open Access Journals (Sweden)

    Bogusław Samotus

    2014-01-01

    Full Text Available In order to determine the concentration of starch in plant materials from the intensity of the blue iodine complex, it is necessary to know the Blue Value (B.V., which is defined in this paper as the absorbancy of 100 mg of a starch-iodine complex in 100 ml of aqueous solution. An adequate amount of plant material is treated with a hot CaCl2 solution for 1/2 hour and the solute is diluted to 25 ml with CaCl2. This basic solution serves to measure absorbancy, as well as for starch determination. The first measurement is done by the dilution of a proper amount of basic solution with water and after adding a diluted iodine-iodide solution the reading of B.V. is taken off. The second measurement is done by the precipitation of a starch iodine complex from a proper amount of the basic solution, which is then purified, destroyed by Na2SO3 solution, and starch is determined by the anthrone method. These two readings serve for the establishing of B.V. for the starch. Once established, B.V. can be used for starch determination in the proper plant material. A high degree of variation of the B.V. was found. The highest B.V. was obtained for wrinkled pea seeds (17.4; walnut, potato, smooth pea and pear gave values from 12.6 to 11.0, common bean and broad bean - 10.3 and 9.7, Triticale, carrot, rye, wheat and garden parsley from 8.7 to 8.0 and maize, oat, normal rice from 7.6 to 6.2. The B.V. for amylose was 25.3, for potato starch 12.4, soluble starch 11.9, wheat starch 8.8 and for Triticale and rye starches, 8.7.

  13. Genetically determined differences in the resistance to myocardial infarction in Wistar and August rats.

    Science.gov (United States)

    Belkina, L M; Saltykova, V A; Pshennikova, M G

    2001-06-01

    In intact August rats, the cardiac contractile function at rest was by 76% higher than in Wistar rats, while their hearts, both intact and after acute myocardial infarction, were more resistant to isometric load than the hearts of Wistar rats. Postinfarction mortality in August rats was 18% vs. 70% in Wistar rats. Adrenoreactivity of the myocardium in August rats was decreased compared to that in Wistar rats. These peculiarities can determine high resistance of August rats to myocardial infarction.

  14. The Memory System Engaged During Acquisition Determines the Effectiveness of Different Extinction Protocols

    OpenAIRE

    Goodman, Jarid; Packard, Mark G.

    2015-01-01

    Previous research indicates that extinction of rodent maze behavior may occur without explicit performance of the previously required response. In latent extinction, confining an animal to a previously rewarded goal location without reinforcement is typically sufficient to produce extinction of maze learning. However, previous studies have not determined whether latent extinction may be successfully employed to extinguish all types of memory acquired in the maze, or whether only specific typ...

  15. Pore size determination using normalized J-function for different hydraulic flow units

    Directory of Open Access Journals (Sweden)

    Ali Abedini

    2015-06-01

    Full Text Available Pore size determination of hydrocarbon reservoirs is one of the main challenging areas in reservoir studies. Precise estimation of this parameter leads to enhance the reservoir simulation, process evaluation, and further forecasting of reservoir behavior. Hence, it is of great importance to estimate the pore size of reservoir rocks with an appropriate accuracy. In the present study, a modified J-function was developed and applied to determine the pore radius in one of the hydrocarbon reservoir rocks located in the Middle East. The capillary pressure data vs. water saturation (Pc–Sw as well as routine reservoir core analysis include porosity (φ and permeability (k were used to develop the J-function. First, the normalized porosity (φz, the rock quality index (RQI, and the flow zone indicator (FZI concepts were used to categorize all data into discrete hydraulic flow units (HFU containing unique pore geometry and bedding characteristics. Thereafter, the modified J-function was used to normalize all capillary pressure curves corresponding to each of predetermined HFU. The results showed that the reservoir rock was classified into five separate rock types with the definite HFU and reservoir pore geometry. Eventually, the pore radius for each of these HFUs was determined using a developed equation obtained by normalized J-function corresponding to each HFU. The proposed equation is a function of reservoir rock characteristics including φz, FZI, lithology index (J*, and pore size distribution index (ɛ. This methodology used, the reservoir under study was classified into five discrete HFU with unique equations for permeability, normalized J-function and pore size. The proposed technique is able to apply on any reservoir to determine the pore size of the reservoir rock, specially the one with high range of heterogeneity in the reservoir rock properties.

  16. Fabrication of a novel electrochemical sensor for determination of hydrogen peroxide in different fruit juice samples

    Directory of Open Access Journals (Sweden)

    Navid Nasirizadeh

    2016-01-01

    Full Text Available A new hydrogen peroxide (H2O2 sensor is fabricated based on a multiwalled carbon nanotube-modified glassy carbon electrode (MWCNT-GCE and reactive blue 19 (RB. The charge transfer coefficient, α, and the charge transfer rate constant, ks, of RB adsorbed on MWCNT-GCE were calculated and found to be 0.44 ± 0.01 Hz and 1.9 ± 0.05 Hz, respectively. The catalysis of the electroreduction of H2O2 by RB-MWCNT-GCE is described. The RB-MWCNT-GCE shows a dramatic increase in the peak current and a decrease in the overvoltage of H2O2 electroreduction in comparison with that seen at an RB modified GCE, MWCNT modified GCE, and activated GCE. The kinetic parameters such as α and the heterogeneous rate constant, k', for the reduction of H2O2 at RB-MWCNT-GCE surface were determined using cyclic voltammetry. The detection limit of 0.27μM and three linear calibration ranges were obtained for H2O2 determination at the RB-MWCNT-GCE surface using an amperometry method. In addition, using the newly developed sensor, H2O2 was determined in real samples with satisfactory results.

  17. DETERMINATION OF MOISTURE DIFFUSION COEFFICIENT OF LARCH BOARD WITH FINITE DIFFERENCE METHOD

    Directory of Open Access Journals (Sweden)

    Qiaofang Zhou

    2011-04-01

    Full Text Available This paper deals with the moisture diffusion coefficient of Dahurian Larch (Larix gmelinii Rupr. by use of the Finite Difference Method (FDM. To obtain moisture distributions the dimensional boards of Dahurian Larch were dried, from which test samples were cut and sliced evenly into 9 pieces in different drying periods, so that moisture distributions at different locations and times across the thickness of Dahurian Larch were obtained with a weighing method. With these experimental data, FDM was used to solve Fick’s one-dimensional unsteady-state diffusion equation, and the moisture diffusion coefficient across the thickness at specified time was obtained. Results indicated that the moisture diffusion coefficient decreased from the surface to the center of the Dahurian Larch wood, and it decreased with decreasing moisture content at constant wood temperature; as the wood temperature increased, the moisture diffusion coefficient increased, and the effect of the wood temperature on the moisture diffusion coefficient was more significant than that of moisture content. Moisture diffusion coefficients were different for the two experiments due to differing diffusivity of the specimens.

  18. PLS-NIR determination of five parameters in different types of Chinese rice wine

    Science.gov (United States)

    Yu, Haiyan; Ying, Yibin; Fu, Xiaping; Lu, Huishan

    2005-11-01

    To evaluate the applicability of near infrared spectroscopy for determination of the five enological parameters (alcoholic degree, pH value, total acid and amino acid nitrogen, °Brix) of Chinese rice wine, transmission spectra were collected in the spectral range from 12500 to 3800 cm-1 in a 1 mm path length rectangular quartz cuvette with air as reference at room temperature. Five calibration equations for the five parameters were established between the reference data and spectra by partial least squares (PLS) regression, separately. The best calibration results were achieved for the determination of alcoholic degree and °Brix. The RPD (ration of the standard deviation of the samples to the SECV) values of the calibration for both alcoholic degree and °Brix were higher than 3 (4.30 and 7.94, respectively), which demonstrated the robustness and power of the calibration models. The determination coefficients (R2) for alcoholic degree and °Brix were 0.987 and 0.991, respectively. The performance of pH, total acid and amino acid nitrogen was not as good as that of alcoholic degree and °Brix. The RPD values for the three parameters were 1.48, 1.85 and 1.82, respectively, and R2 values were 0.964, 0.970 and 0.971, respectively. In validation step, R2 value of the five parameters are all higher than 0.7, especially for alcoholic degree and °Brix (0.968 and 0.956, respectively). The results demonstrated that NIR spectroscopy could be used to predict the concentration of the five enological parameters in Chinese rice wine.

  19. The role of positive selection in determining the molecular cause of species differences in disease

    Directory of Open Access Journals (Sweden)

    Foord Steven M

    2008-10-01

    Full Text Available Abstract Background Related species, such as humans and chimpanzees, often experience the same disease with varying degrees of pathology, as seen in the cases of Alzheimer's disease, or differing symptomatology as in AIDS. Furthermore, certain diseases such as schizophrenia, epithelial cancers and autoimmune disorders are far more frequent in humans than in other species for reasons not associated with lifestyle. Genes that have undergone positive selection during species evolution are indicative of functional adaptations that drive species differences. Thus we investigate whether biomedical disease differences between species can be attributed to positively selected genes. Results We identified genes that putatively underwent positive selection during the evolution of humans and four mammals which are often used to model human diseases (mouse, rat, chimpanzee and dog. We show that genes predicted to have been subject to positive selection pressure during human evolution are implicated in diseases such as epithelial cancers, schizophrenia, autoimmune diseases and Alzheimer's disease, all of which differ in prevalence and symptomatology between humans and their mammalian relatives. In agreement with previous studies, the chimpanzee lineage was found to have more genes under positive selection than any of the other lineages. In addition, we found new evidence to support the hypothesis that genes that have undergone positive selection tend to interact with each other. This is the first such evidence to be detected widely among mammalian genes and may be important in identifying molecular pathways causative of species differences. Conclusion Our dataset of genes predicted to have been subject to positive selection in five species serves as an informative resource that can be consulted prior to selecting appropriate animal models during drug target validation. We conclude that studying the evolution of functional and biomedical disease differences

  20. Determination of tylosin residues in different animal tissues by high performance liquid chromatography.

    Science.gov (United States)

    Prats, C; Francesch, R; Arboix, M; Pérez, B

    2002-01-05

    A HPLC method to determine and quantify tylosin residues from calves, pigs and poultry is reported. This procedure permitted tylosin to be separated from muscle, liver, kidney and fat after a simple extraction with chloroform or ethyl acetate under basic conditions. The analytical methodology showed a high specificity and sensitivity and an adequate precision and accuracy with a limit of quantification of 50 microg/kg. Eight calves were administered 20 mg/kg/day of tylosin for 5 days and slaughtered at 7 and 14 days post-administration. Results showed that at the 14th day tylosin levels were lower than the MRL in all target tissues.

  1. Determination of microelement distribution in different components of soil-plant system

    International Nuclear Information System (INIS)

    Luu Viet Hung; Maslov, O.D.; Gustova, M.V.; Trinh Thi Thu My; Phung Khac Nam Ho

    2011-01-01

    Leaves, stem, and roots of two shrub types: tea (Camellia sinensis), sweet leaf (Sauropus androgynus) and two herb types: vetiver grass (Vetiveria zizanioides L.Nash), maize (Zea mays L) and Thucuc soil where the plants grow, were collected to be studied. Contents of 22 elements in the samples were determined by three methods: XRFA (X-Ray Fluorescence Analysis), GAA (Gamma Activation Analysis), and tracking method to study distribution of these elements in plants and soil-plant relationship. The study was carried out at the Flerov Laboratory of Nuclear Reactions, JINR, Dubna. Distribution of the elements in the soil-plant system was studied

  2. Determination of Heavy Metals in Alpinia oxyphylla Miq. Collected from Different Cultivation Regions

    OpenAIRE

    Zhou, Dan; Fu, Yurong; Lai, Weiyong; Zhang, Junqing

    2016-01-01

    20 batches of Alpinia oxyphylla Miq. were collected from Yunnan, Guangdong, Guangxi, and Hainan province in China. The contents of heavy metals of As, Hg, Pb, Cd, and Cu were determined and compared. The results indicated that geographical source might be a major factor to influence the contents of heavy metals of arsenic (As), mercury (Hg), lead (Pb), cadmium (Cd), and copper (Cu) in Alpinia oxyphylla Miq. Compared to the criteria of heavy metals, the contents of As, Hg, Pb, and Cd in almost...

  3. Determination of the spectral behaviour of atmospheric soot using different particle models

    Science.gov (United States)

    Skorupski, Krzysztof

    2017-08-01

    In the atmosphere, black carbon aggregates interact with both organic and inorganic matter. In many studies they are modeled using different, less complex, geometries. However, some common simplification might lead to many inaccuracies in the following light scattering simulations. The goal of this study was to compare the spectral behavior of different, commonly used soot particle models. For light scattering simulations, in the visible spectrum, the ADDA algorithm was used. The results prove that the relative extinction error δCext, in some cases, can be unexpectedly large. Therefore, before starting excessive simulations, it is important to know what error might occur.

  4. Are Happiness and Life Satisfaction Different Across Religious Groups? Exploring Determinants of Happiness and Life Satisfaction.

    Science.gov (United States)

    Ngamaba, Kayonda Hubert; Soni, Debbie

    2017-09-26

    This study explores whether different religions experience different levels of happiness and life satisfaction and in case this is affected by country economic and cultural environment. Using World Value Survey (from 1981 to 2014), this study found that individual religiosity and country level of development play a significant role in shaping people's subjective well-being (SWB). Protestants, Buddhists and Roman Catholic were happier and most satisfied with their lives compared to other religious groups. Orthodox has the lowest SWB. Health status, household's financial satisfaction and freedom of choice are means by which religious groups and governments across the globe can improve the SWB of their citizens.

  5. Determination of benzene in different food matrices by distillation and isotope dilution HS-GC/MS

    International Nuclear Information System (INIS)

    Medeiros Vinci, Raquel; Canfyn, Michael; De Meulenaer, Bruno; Schaetzen, Thibault de; Van Overmeire, Ilse; De Beer, Jacques; Van Loco, Joris

    2010-01-01

    Benzene is classified by the IARC as carcinogenic to humans. Several sources may contribute for the occurrence of benzene in foods, such as, environmental contamination and the reaction of benzoate salts with ascorbic acid (naturally present or added as food additives). Matrix effect on benzene recovery (e.g. in fatty foods) and artefactual benzene formation from benzoate during analysis in the presence of ascorbate are some of the challenges presented when determining benzene in a wide range of foodstuffs. Design of experiment (DOE) was used to determine the most important variables in benzene recovery from headspace GC/MS. Based on the results of the DOE, a versatile method for the extraction of benzene from all kind of food commodities was developed. The method which consisted of distillation and isotope dilution HS-GC/MS was in-house validated. Artefactual benzene was prevented by addition of a borate buffer solution (pH 11) under distillation conditions. The method presented in this study allows the use of a matrix-independent calibration with detection limits below the legal limit established by the European Council for benzene in drinking water (1 μg L -1 ).

  6. Determination of benzene in different food matrices by distillation and isotope dilution HS-GC/MS

    Energy Technology Data Exchange (ETDEWEB)

    Medeiros Vinci, Raquel [Department of Food Safety and Food Quality, Faculty of Bioscience Engineering, Ghent University, Coupure Links 653, B-9000 Ghent (Belgium); Canfyn, Michael [Food, Medicines and Consumer Safety, Scientific Institute of Public Health, Rue Juliette Wytsmanstraat 14, 1050 Brussels (Belgium); De Meulenaer, Bruno [Department of Food Safety and Food Quality, Faculty of Bioscience Engineering, Ghent University, Coupure Links 653, B-9000 Ghent (Belgium); Schaetzen, Thibault de; Van Overmeire, Ilse; De Beer, Jacques [Food, Medicines and Consumer Safety, Scientific Institute of Public Health, Rue Juliette Wytsmanstraat 14, 1050 Brussels (Belgium); Van Loco, Joris, E-mail: Joris.VanLoco@iph.fgov.BE [Food, Medicines and Consumer Safety, Scientific Institute of Public Health, Rue Juliette Wytsmanstraat 14, 1050 Brussels (Belgium)

    2010-07-05

    Benzene is classified by the IARC as carcinogenic to humans. Several sources may contribute for the occurrence of benzene in foods, such as, environmental contamination and the reaction of benzoate salts with ascorbic acid (naturally present or added as food additives). Matrix effect on benzene recovery (e.g. in fatty foods) and artefactual benzene formation from benzoate during analysis in the presence of ascorbate are some of the challenges presented when determining benzene in a wide range of foodstuffs. Design of experiment (DOE) was used to determine the most important variables in benzene recovery from headspace GC/MS. Based on the results of the DOE, a versatile method for the extraction of benzene from all kind of food commodities was developed. The method which consisted of distillation and isotope dilution HS-GC/MS was in-house validated. Artefactual benzene was prevented by addition of a borate buffer solution (pH 11) under distillation conditions. The method presented in this study allows the use of a matrix-independent calibration with detection limits below the legal limit established by the European Council for benzene in drinking water (1 {mu}g L{sup -1}).

  7. Determinants of Success in Native and Non-Native Listening Comprehension: An Individual Differences Approach

    Science.gov (United States)

    Andringa, Sible; Olsthoorn, Nomi; van Beuningen, Catherine; Schoonen, Rob; Hulstijn, Jan

    2012-01-01

    The goal of this study was to explain individual differences in both native and non-native listening comprehension; 121 native and 113 non-native speakers of Dutch were tested on various linguistic and nonlinguistic cognitive skills thought to underlie listening comprehension. Structural equation modeling was used to identify the predictors of…

  8. Determinants of success in native and non-native listening comprehension: an individual differences approach

    NARCIS (Netherlands)

    Andringa, S.; Olsthoorn, N.; van Beuningen, C.; Schoonen, R.; Hulstijn, J.

    2012-01-01

    The goal of this study was to explain individual differences in both native and non-native listening comprehension; 121 native and 113 non-native speakers of Dutch were tested on various linguistic and nonlinguistic cognitive skills thought to underlie listening comprehension. Structural equation

  9. Determining Minimal Clinically Important Differences in Japanese Cedar/Cypress Pollinosis Patients

    Directory of Open Access Journals (Sweden)

    Takaya Higaki

    2013-01-01

    Conclusions: For T5SS in the diary, T6SS and QOL in JRQLQ, unit differences of 1.5 (0.3 per item, 3.6 (0.6 and 8.2 (0.5, respectively, were considered clinically meaningful by JCCP patients. The MCID for symptoms recorded in the diary was stable irrespective of the dispersed pollen level.

  10. Determinants of language use and attitudes among Turkish speakers in Flanders: a focus on generational difference

    NARCIS (Netherlands)

    Altınkamış, N.F.; Ağırdağ, O.

    2014-01-01

    The focus of this research is Turkish immigrants’ language use-preference and language attitudes towards their first language, Turkish, in terms of intergenerational differences in the Flemish speaking part of Belgium. Borrowing the procedure by Yagmur and van de Vijver (2012), 136 participants were

  11. Modeling the Direct and Indirect Determinants of Different Types of Individual Job Performance

    Science.gov (United States)

    2008-06-01

    dimension is an element of task performance (Johnson, 2003), the middle three dimensions all tap different aspects of citizenship performance (Borman...Record your effectiveness rating for each response (from 1 to 7) on the line to the eft of the response. In addition, select which ONE response out of

  12. Survey of the natural radiation of Belgian territory as determined by different methods

    International Nuclear Information System (INIS)

    Deworm, J.P.; Slegers, W.; Gillard, J.; Flemal, J.M.; Culst, J.P.

    1988-01-01

    Measurement of the environmental exposure to natural radiation was performed by the Institute of Hygiene and Epidemiology and the Nuclear Research Centre in Mol. The aim of the study was the estimation of the external doses from natural radioactivity received by the Belgian population and the setting up on a map of the territory of natural exposure rates measured using different methods. (author)

  13. Determination of Optimum Network Layout for Low-Energy District Heating Systems with Different Substation Types

    DEFF Research Database (Denmark)

    Tol, Hakan; Svendsen, Svend

    2011-01-01

    with comparisons given in the point of dimensions and energy efficiency of the DH network for winter peak conditions. Also, two different network layouts –branched network with bypasses, installed at the end-users, and looped network without bypasses–, which are appointed for the purpose to prevent excessive...

  14. Sex differences in antihypertensive drug use : determinants of the choice of medication for hypertension

    NARCIS (Netherlands)

    Klungel, O.H.; de Boer, A; Paes, A.H.P.; Seidell, J C; Bakker, A

    1998-01-01

    OBJECTIVE: To describe and explain sex differences in antihypertensive drug use. DESIGN AND METHODS: From 1987 to 1995, two cross-sectional population-based surveys of cardiovascular disease risk factors in The Netherlands were carried out among 56026 men and women aged 20-59 years. Polytomous

  15. Distinct transmitter release properties determine differences in short-term plasticity at functional and silent synapses.

    Science.gov (United States)

    Cabezas, Carolina; Buño, Washington

    2006-05-01

    Recent evidence suggests that functional and silent synapses are not only postsynaptically different but also presynaptically distinct. The presynaptic differences may be of functional importance in memory formation because a proposed mechanism for long-term potentiation is the conversion of silent synapses into functional ones. However, there is little direct experimentally evidence of these differences. We have investigated the transmitter release properties of functional and silent Schaffer collateral synapses and show that on the average functional synapses displayed a lower percentage of failures and higher excitatory postsynaptic current (EPSC) amplitudes than silent synapses at +60 mV. Moreover, functional but not silent synapses show paired-pulse facilitation (PPF) at +60 mV and thus presynaptic short-term plasticity will be distinct in the two types of synapse. We examined whether intraterminal endoplasmic reticulum Ca2+ stores influenced the release properties of these synapses. Ryanodine (100 microM) and thapsigargin (1 microM) increased the percentage of failures and decreased both the EPSC amplitude and PPF in functional synapses. Caffeine (10 mM) had the opposite effects. In contrast, silent synapses were insensitive to both ryanodine and caffeine. Hence we have identified differences in the release properties of functional and silent synapses, suggesting that synaptic terminals of functional synapses express regulatory molecular mechanisms that are absent in silent synapses.

  16. Determinants of day–night difference in blood pressure, a comparison with determinants of daytime and night-time blood pressure

    Science.gov (United States)

    Musameh, M D; Nelson, C P; Gracey, J; Tobin, M; Tomaszewski, M; Samani, N J

    2017-01-01

    Blunted day–night difference in blood pressure (BP) is an independent cardiovascular risk factor, although there is limited information on determinants of diurnal variation in BP. We investigated determinants of day–night difference in systolic (SBP) and diastolic (DBP) BP and how these compared with determinants of daytime and night-time SBP and DBP. We analysed the association of mean daytime, mean night-time and mean day–night difference (defined as (mean daytime−mean night-time)/mean daytime) in SBP and DBP with clinical, lifestyle and biochemical parameters from 1562 adult individuals (mean age 38.6) from 509 nuclear families recruited in the GRAPHIC Study. We estimated the heritability of the various BP phenotypes. In multivariate analysis, there were significant associations of age, sex, markers of adiposity (body mass index and waist–hip ratio), plasma lipids (total and low-density lipoprotein cholesterol and triglycerides), serum uric acid, alcohol intake and current smoking status on daytime or night-time SBP and/or DBP. Of these, only age (P=4.7 × 10−5), total cholesterol (P=0.002), plasma triglycerides (P=0.006) and current smoking (P=3.8 × 10−9) associated with day–night difference in SBP, and age (P=0.001), plasma triglyceride (P=2.2 × 10−5) and current smoking (3.8 × 10−4) associated with day–night difference in DBP. 24-h, daytime and night-time SBP and DBP showed substantial heritability (ranging from 18–43%). In contrast day–night difference in SBP showed a lower heritability (13%) while heritability of day–night difference in DBP was not significant. These data suggest that specific clinical, lifestyle and biochemical factors contribute to inter-individual variation in daytime, night-time and day–night differences in SBP and DBP. Variation in day–night differences in BP is largely non-genetic. PMID:26984683

  17. Determination of urea utilization of rice at different growth stages by 15N tracer technique

    International Nuclear Information System (INIS)

    Korkmaz, A.; Halitligil, M.B.; Torun, M.

    1991-01-01

    This study reported here examines the percent utilization of 15 N labelled urea by rice when it is broadcasted over the soil surface or mixed within 10 cm soil at different vegetative stages. The experimental plots were arranged in randomized block design and replicated 3 times. N was applied at a rate of 120 kg N/ha as single or split applications at four different times during the growing season. Labelled urea was applied to 0.5x0.5 m plots only in 1988, however in 1989 unlabelled urea was applied to all plots. Stover and seed samples from each plot were harvested, dried at 65 0 C, weighed and kilogram per hectare were calculated in 1988. Also, the yield surplus per kilogram N was calculated for each treatment and this was indicated as urea fertilizer efficiency coefficient. Total N and 15 N analysis for stover and seed were done. Significant differences (at 0.05 level) were observed in stover and seed yields, when 120 kg/ha urea was split applied at different growth stages. Similar yield responses were obtained in 1988 and 1989. Highest seed yields were obtained when half of urea was applied at planting and the other half was applied at one week before heading. The results also showed that the highest utilization of urea for seed plus stover was obtained from the second half of urea (60 kg N/ha) applied one week before heading. Percent utilization of urea by rice also differed according to the rate applied at each stage

  18. Different efflux rates may determine the cellular accumulation of various bis(guanylhydrazones).

    Science.gov (United States)

    Alhonen-Hongisto, L; Fagerström, R; Laine, R; Elo, H; Jänne, J

    1984-01-01

    Three bis(guanylhydrazones) (those of methylglyoxal, glyoxal and ethylglyoxal) were compared for their affinity for the putative polyamine carrier and for their cellular retention in L1210 mouse leukaemia cells. All the bis(guanylhydrazones) inhibited equally effectively the uptake of spermidine by the tumour cells, indicating that the compounds had roughly equal affinity for the polyamine carrier. The fact that methylglyoxal bis(guanylhydrazone) and glyoxal bis(guanylhydrazone) were much more effectively concentrated in the animal cells than was ethylglyoxal bis(guanylhydrazone) was obviously attributable to the finding that the efflux rate of ethylglyoxal bis(guanylhydrazone) greatly exceeded that of the other bis(guanylhydrazones). The rate of efflux of the drugs was slowed down if the tumour cells were treated with 2-difluoromethylornithine before exposure to the bis(guanylhydrazones). These results suggest that intracellular binding of the bis(guanylhydrazones) determines their cellular accumulation. PMID:6431972

  19. Determination of Different Metals in Steel Waste Samples Using laser Induced Breakdown Spectroscopy

    Directory of Open Access Journals (Sweden)

    A. H. Bakry

    2007-12-01

    Full Text Available Elemental analysis of waste samples collected from steel products manufacturing plant (SPS located at industrial city of Jeddah, Saudi-Arabia has been carried out using Laser Induced Breakdown Spectroscopy (LIBS. The 1064 nm laser radiations from a Nd:YAG laser at an irradiance of 7.6  1010 W cm –2 were used. Atomic emission spectra of the elements present in the waste samples were recorded in the 200 – 620 nm region. Elements such as Fe, W, Ti, Al, Mg, Ca, S, Mn, and Na were detected in these samples. Quantitative determination of the elemental concentration was obtained for these metals against certified standard samples. Parametric dependences of LIBS signal intensity on incident laser energy and time delay between the laser pulse and data acquisition system were also carried out.

  20. Three different spectrophotometric methods manipulating ratio spectra for determination of binary mixture of Amlodipine and Atorvastatin

    Science.gov (United States)

    Darwish, Hany W.; Hassan, Said A.; Salem, Maissa Y.; El-Zeiny, Badr A.

    2011-12-01

    Three simple, specific, accurate and precise spectrophotometric methods manipulating ratio spectra are developed for the simultaneous determination of Amlodipine besylate (AM) and Atorvastatin calcium (AT) in tablet dosage forms. The first method is first derivative of the ratio spectra ( 1DD), the second is ratio subtraction and the third is the method of mean centering of ratio spectra. The calibration curve is linear over the concentration range of 3-40 and 8-32 μg/ml for AM and AT, respectively. These methods are tested by analyzing synthetic mixtures of the above drugs and they are applied to commercial pharmaceutical preparation of the subjected drugs. Standard deviation is <1.5 in the assay of raw materials and tablets. Methods are validated as per ICH guidelines and accuracy, precision, repeatability and robustness are found to be within the acceptable limit.

  1. DETERMINATION OF ENZYMES PRODUCED BY CERIPORIOPSIS SUBVERMISPORA DURING PRETREATMENT OF DIFFERENT BIOMASS SOURCES

    Directory of Open Access Journals (Sweden)

    Miroslav Ondrejovič

    2012-02-01

    Full Text Available The aim of this paper was to study of lignocellulolytic enzymes producing by Ceriporiopsis subvermispora during its cultivation on three types of plant biomass differentiated by chemical composition and physical properties (wheat straw, pine and poplar wood. The activity of lignocellulolytic enzymes in cultivation medium was determined by catalytic transformation of their natural substrates to products which were detected by photometric methods. Cellulase activities were very low while xylanases predominated. Wheat straw was best substrate for production of cellulases (4.38 U/mL and xylanases (23.34 U/mL. The maximum activity of cellulase and xylanase was reached at 8th and 3rd day, respectively. Laccase activity reached the maximum after 16 days and then gradually decreased. The best substrate for production of laccases was poplar wood (1.67 U/mL.

  2. Altitude Distribution of the Auroral Acceleration Potential Determined from Cluster Satellite Data at Different Heights

    International Nuclear Information System (INIS)

    Marklund, Goeran T.; Sadeghi, Soheil; Karlsson, Tomas; Lindqvist, Per-Arne; Nilsson, Hans; Forsyth, Colin; Fazakerley, Andrew; Lucek, Elizabeth A.; Pickett, Jolene

    2011-01-01

    Aurora, commonly seen in the polar sky, is a ubiquitous phenomenon occurring on Earth and other solar system planets. The colorful emissions are caused by electron beams hitting the upper atmosphere, after being accelerated by quasistatic electric fields at 1-2 R E altitudes, or by wave electric fields. Although aurora was studied by many past satellite missions, Cluster is the first to explore the auroral acceleration region with multiprobes. Here, Cluster data are used to determine the acceleration potential above the aurora and to address its stability in space and time. The derived potential comprises two upper, broad U-shaped potentials and a narrower S-shaped potential below, and is stable on a 5 min time scale. The scale size of the electric field relative to that of the current is shown to depend strongly on altitude within the acceleration region. To reveal these features was possible only by combining data from the two satellites.

  3. Individual heterogeneity determines sex differences in mortality in a monogamous bird with reversed sexual dimorphism

    DEFF Research Database (Denmark)

    Colchero, Fernando; Aliaga, Alix Eva; Jones, Owen

    2017-01-01

    in shaping demographic trajectories in wild populations. The link between these two processes has seldom been explored. 2. We used Bayesian survival trajectory analysis to study age-specific mortality trajectories in the Eurasian sparrowhawk (Accipiter nisus), a monogamous raptor with reversed sexual size...... driven by the differences in individual heterogeneity between the two sexes. Females were more heterogeneous than males in their level of frailty. Thus, a larger number of females with low frailty are able to survive to older ages than males, with life expectancy for the least frail adult females....... Although we found that variables that relate to the cost of reproduction and sexual dimorphism are at least partially involved in determing these sex differences, it is through their effect on the level of frailty that they affect age patterns of mortality. Therefore, our results raise the possibility...

  4. Comparative use of different emission measurement approaches to determine methane emissions from a biogas plant

    DEFF Research Database (Denmark)

    Reinelt, Torsten; Delre, Antonio; Westerkamp, Tanja

    2017-01-01

    (corresponding to a methane loss of 0.6 and 2.1%) from team to team, depending on the number of measured emission points, operational state during the measurements and the measurement method applied. Taking the operational conditions into account, the deviation between different approaches and teams could......A sustainable anaerobic biowaste treatment has to mitigate methane emissions from the entire biogas production chain, but the exact quantification of these emissions remains a challenge. This study presents a comparative measurement campaign carried out with on-site and ground-based remote sensing...... measurement approaches conducted by six measuring teams at a Swedish biowaste treatment plant. The measured emissions showed high variations, amongst others caused by different periods of measurement performance in connection with varying operational states of the plant. The overall methane emissions measured...

  5. Determination of uranium and thorium contents inside different materials using track detectors and mean critical angles

    CERN Document Server

    Misdaq, M A; Ktata, A; Merzouki, A; Youbi, N

    1999-01-01

    The critical angles of the CR-39 (theta sub c) and LR-115 type II (theta sub c ') solid state nuclear track detectors (SSNTD) for detecting alpha-particles emitted by the uranium and thorium series have been evaluated by calculating the corresponding ranges of the emitted alpha-particles in different material samples and in the SSNTD studied. The influence of the emitted alpha-particles initial and residual energies on the critical angles of the SSNTD studied has been investigated. The uranium and thorium contents of different geological samples have been evaluated by exploiting data obtained for the critical angles of the CR-39 and LR-115 type II solid state nuclear track detectors and measuring the corresponding densities of tracks.

  6. Utilization of ICP/OES for the determination of trace metal binding to different humic fractions.

    Science.gov (United States)

    de la Rosa, G; Peralta-Videa, J R; Gardea-Torresdey, J L

    2003-02-28

    In this study, the use of inductively coupled plasma/optical emission spectrometry (ICP/OES) to determine multi-metal binding to three biomasses, Sphagnum peat moss, humin and humic acids is reported. All the investigations were performed under part per billion (ppb) concentrations. Batch pH profile experiments were performed using multi-metal solutions of Cd(II), Cu(II), Pb(II), Ni(II), Cr(III) and Cr(VI). The results showed that at pH 2 and 3, the metal affinity of the three biomasses exposed to the multi-metal solution that included Cr(III) presented the following order: Cu(II), Pb(II)>Ni(II)>Cr(III)>Cd(II). On the other hand, when Cr(VI) was in the heavy metal mixture, Sphagnum peat moss and humin showed the following affinity: Cu(II), Pb(II)>Ni(II)>Cr(VI)>Cd(II); however, the affinity of the humic acids was: Cu(II)>Pb(II), Cr(VI)>Ni(II)>Cd(II). The results demonstrated that pH values of 4 and 5 were the most favorable for the heavy metal binding process. At pH 5, all the metals, except for Cr(VI), were bound between 90 and 100% to the three biomasses. However, the binding capacity of humic acids decreased at pH 6 in the presence of Cr(VI). The results showed that the ICP/OES permits the determination of heavy metal binding to organic matter at ppb concentration. These results will be very useful in understanding the role of humic substances in the fate and transport of heavy metals, and thus could provide information to develop new methodologies for the removal of low concentrations of toxic heavy metals from contaminated waters.

  7. Comparison of different methods for the determination of fractal characteristics of soot aggregates

    International Nuclear Information System (INIS)

    Ouf, F.X.; Coursil, C.; Vendel, J.; Coursil, C.; Gehin, E.

    2007-01-01

    Morphology of particles generated during hydrocarbons or biomass combustion is fundamental as data for characterizing the optical and aerodynamic behaviour of these particles. The fractal nature of soot particles is well known since the works of Jullien and Botet (1987). Nevertheless, the determination of the fractal morphology of these aggregates is based on direct analysis of transmission electronic microscopy (TEM) micrography (Koylo et al., 1995; Sorensen and Feke, 1996; Brasil et al., 2000) which represents a long and tiresome work. We propose in this work to use the method introduced by Kelly and McMurry (1992) and based on serial analysis of electrical mobility and aerodynamic diameters of soot aggregates. This method has been recently used by VanGulijk et al. (2004) and Park et al. (2004), and seems to bring morphological information systematically higher than the TEM analysis. In this study we will detail the TEM analysis method and the theoretical approach associated to the serial method of Kelly and McMurry (1992). We will also present the experimental setup used and the results obtained for aggregates generated during the combustion of acetylene (C 2 H 2 ), toluene (C 7 H 8 ) and Polymethyl Methacrylate (PMMA, C 5 H 8 O 2 ). These results will be compared to TEM analysis results, and discrepancies will be analysed and explained in detail. We will finally conclude on advantages and disadvantages of each method and also on potential of these approaches. The link will be thus established out with the determination of the effective density of the soot aggregates, which is presented in work of Ouf et al. (2005a). (authors)

  8. Short communication: Determination of withdrawal time for oxytetracycline in different types of goats for milk consumption.

    Science.gov (United States)

    Attaie, Rahmat; Bsharat, Mohammed; Mora-Gutierrez, Adela; Woldesenbet, Sela

    2015-07-01

    Antibiotics are widely used in animal husbandry and the presence of antibiotics in milk is a health hazard. The objective of this study was to determine residual amounts of oxytetracycline in fresh, aged, and pasteurized milk of 3 breeds of goats using HPLC analysis. It was also essential to determine the safe withdrawal period of oxytetracycline in lactating goats. The quantitative results obtained using the HPLC system were compared with the tolerance limit of oxytetracycline in milk in the United States. Fifteen milking does, 5 Nubians, 5 Alpines, and 5 LaManchas were randomly selected from the milking herd at the International Goat Research Center at Prairie View A&M University. A simple sample preparation and isocratic HPLC method using ultraviolet detection was used for analysis of milk samples. The HPLC results indicated that the withdrawal period of oxytetracycline in treated Alpine does was 82h (7 milking), whereas for Nubian does the period was 58h (5 milking), and for LaManchas the period was 72h (6 milking) after drug administration. The overall withdrawal period for all the treated goats of 3 breeds was 72h. Although these results indicated that the depletion rate of this antibiotic was faster in goats than the reported data for cows, the 96-h withdrawal period that is currently used for lactating cows is still necessary for these 3 breeds of goats. Additionally, our results indicated that oxytetracycline is not stable in goat milk at refrigeration temperature or during pasteurization and will decrease significantly. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  9. Two different spectrofluorimetric methods for simultaneous determination of gemfibrozil and rosiglitazone in human plasma.

    Science.gov (United States)

    El-Din, Mohie M K Sharaf; Attia, Khalid A M; Nassar, Mohamed W I; Kaddah, Mohamed M Y

    2010-10-15

    Two accurate, reliable, and highly sensitive spectrofluorimetric methods were developed for simultaneous determination of binary mixture gemfibrozil and rosiglitazone in human plasma without prior separation steps. The first method is based on synchronous fluorescence spectrometry using double scans. At Δλ=27nm, gemfibrozil yields detectable signal that is independent of the presence of rosiglitazone. Similarly, at Δλ=120nm the signal of rosiglitazone is not influenced by the presence of gemfibrozil. Signals at two wavelengths, 301 (Δλ=27nm) and 368nm (Δλ=120nm) vary linearly with gemfibrozil and rosiglitazone concentrations over the range 100-700ngmL(-1) (for gemfibrozil) and 20-140ngmL(-1) (for rosiglitazone), respectively. The limits of detection (LOD) were 2.3 and 2.72ngmL(-1) for gemfibrozil and rosiglitazone, respectively. The second method is based on the technique of simultaneous equations (Vierodt's method), in which 258nm was selected as the excitation wavelength. Two equations are constructed based on the fact that at ( λ(EM)₂=302 nm of gemfibrozil) and (λ(EM)₂=369 nm of rosiglitazone) the fluorescence of the mixture is the sum of the individual fluorescence of gemfibrozil and rosiglitazone. The limits of detection (LOD) were 28.1 and 23.63ngmL(-1) for gemfibrozil and rosiglitazone, respectively. The proposed methods were successfully applied for the determination of the two compounds in synthetic mixtures and in human plasma with a good recovery. Copyright © 2010 Elsevier B.V. All rights reserved.

  10. Determining Minimal Clinically Important Differences in Japanese Cedar/Cypress Pollinosis Patients

    OpenAIRE

    Takaya Higaki; Mitsuhiro Okano; Shin Kariya; Tazuko Fujiwara; Takenori Haruna; Haruka Hirai; Aya Murai; Minoru Gotoh; Kimihiro Okubo; Shuji Yonekura; Yoshitaka Okamoto; Kazunori Nishizaki

    2013-01-01

    Background: Statistically significant results of medical intervention trials are not always clinically meaningful. We sought to estimate the minimal clinically important difference (MCID) (the smallest change in a given endpoint that is meaningful to a patient) during seasonal alteration of Japanese cedar/cypress pollinosis (JCCP). Methods: Results of a double-blinded, placebo-controlled trial of JCCP patients conducted between 2008 and 2010 were analyzed using an anchor-based method in wh...

  11. Mother-Father Differences in Postnatal Psychological Distress and Its Determinants in Iran

    Directory of Open Access Journals (Sweden)

    Hassan Mahmoodi

    2017-01-01

    CONCLUSION: The level of PPD was more prevalent among the new fathers compared to the new mothers. Among the fathers, but not the mothers, socioeconomic characteristics were contributed to PPD. Considering the differences in risk factors for maternal and paternal PPD, our findings may help family health care providers and policymakers in designing gender-specific intervention programs and diagnosis tools aimed at PPD prevention among new parents.

  12. Ethnicity as a determinant of ovarian reserve: differences in ovarian aging between Spanish and Indian women.

    Science.gov (United States)

    Iglesias, Carlos; Banker, Manish; Mahajan, Nalini; Herrero, Leyre; Meseguer, Marcos; Garcia-Velasco, Juan A

    2014-07-01

    To investigate differences in ovarian reserve markers (antimüllerian hormone [AMH] and antral follicle count [AFC]) in Indian and Spanish women. Cross-sectional study. In vitro fertilization (IVF) clinics. Infertile Spanish (n=229) and Indian (n=236) women who underwent controlled ovarian stimulation for IVF from January to October 2012. None. Data on ovarian reserve markers and results after ovarian stimulation were collected. The mean age of women undergoing their first or second IVF cycle was significantly higher in Spanish than in Indian women (37.5±3.3 years vs. 31.5±3.8 years). Despite this 6-year age gap, AFCs were similar (9.5±4.7 vs. 9.9±4.6), as were day 3 FSH levels (7.5±4.5 IU/L vs. 6.9±2.3 IU/L). AMH levels were slightly lower in Spanish women (1.6±1.7 ng/mL vs. 2.5±1.6 ng/mL). Multivariate regression analysis showed that being Indian decreased AFC by 2.3, such that AFC in Indian women was similar to that in Spanish women 6.3 years older (95% confidence interval 3.39-1.10). Similar ovarian reserve markers and ovarian response were observed in women with a 6-year age difference in favor of the Spanish, suggesting ethnic differences in ovarian aging. Further research is needed to understand whether these differences are genetically induced or are caused by other variables, such as nutrition. Our results may help clinicians to counsel infertile women when discussing assisted reproductive technology outcomes according to age and ethnic background. Copyright © 2014 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  13. Determination of optimum insulation thicknesses using economical analyse for exterior walls of buildings with different masses

    Directory of Open Access Journals (Sweden)

    Okan Kon

    2017-07-01

    Full Text Available In this study, five different cities were selected from the five climatic zones according to Turkish standard TS 825, and insulation thicknesses of exterior walls of sample buildings were calculated by using optimization. Vertical perforated bricks with density of 550 kg/m3 and 1000 kg/m3 were chosen within the study content. Glass wool, expanded polystyrene (XPS, extruded polystyrene (EPS were considered as insulation materials. Additionally, natural gas, coal, fuel oil and LPG were utilized as fuel for heating process while electricity was used for cooling.  Life cycle cost (LCC analysis and degree-day method were the approaches for optimum insulation thickness calculations. As a result, in case of usage vertical perforated bricks with density of 550 kg/m3 and 1000 kg/m3 resulted different values in between 0.005-0.007 m (5-7 mm in the optimum insulation thickness calculations under different insulation materials.  Minimum optimum insulation thickness was calculated in case XPS was preferred as insulation material, and the maximum one was calculated in case of using glass wool.

  14. Excessive internet use in European adolescents: what determines differences in severity?

    Science.gov (United States)

    Blinka, Lukas; Škařupová, Kateřina; Ševčíková, Anna; Wölfling, Klaus; Müller, Kai W; Dreier, Michael

    2015-02-01

    This study investigated the differences between non-excessive, moderately excessive, and highly excessive internet use among adolescents. These differences were explored in terms of personal characteristics, psychological difficulties, environmental factors, and manner of internet use. A representative sample was investigated, consisting of 18,709 adolescents aged 11-16 and their parents, from 25 European countries. Excessive internet use was measured using a five item scale covering following factors: salience, conflict, tolerance, withdrawal symptoms, and relapse and reinstatement. The main data analysis utilised multinomial and binary logistic regression models. The vast majority of respondents reported no signs of excessive internet use. Moderately excessive users (4.4%) reported higher emotional and behavioural difficulties, but also more sophisticated digital skills and a broader range of online activities. The highly excessive users (1.4%) differed from the non-excessive and moderately excessive users in their preference for online games and in having more difficulties with self-control. Adolescents who struggle with attention and self-control and who are inclined toward online gaming may be especially vulnerable to the otherwise uncommon phenomenon of excessive internet use.

  15. Determination of physiological parameters of Tilla cordata Mill. in different environments cultivation

    Directory of Open Access Journals (Sweden)

    Maksat Bekboevich Matraimov

    2012-01-01

    Full Text Available This experiment investigated the effect of different container design on growth and development of Small-leaved lime (Tilia cordata Mill.. Experimental plants acquired in the Netherlands were of standardized height 0.4 meters, with diameter of the root neck of 3–5 mm. To monitor the effect of different types of containers (“Air-Pot™” container – Bohemiaseed, s. r. o., Squared containers “Vet” – SINCO Ltd., Containers 50 Series MCI/MCC – round plastic nursery containers, “Air pot” garden bags – Arbo ® Standard, Poland on the physiological and morphological parameters of plants, three types of nursery containers were selected with open ground as control variant. Statistically significant difference between fluorescence and time of measurement was also found. In the Small-leaved lime the container type did not affect chlorophyll content or chlorophyll fluorescence (Fv/Fm; plants grown in Containers 50 Series MCI/MCC showed a lower chlorophyll content compared to plants grown in “Air-Pot ™” containers. As reported in literature, Fv/Fm ratio is a reliable indicator of the occurrence of environmental stresses, including water stress, on air-pot bag for several woody and herbaceous species.

  16. Family, money, and health: Regional differences in the determinants of life satisfaction over the life course

    Science.gov (United States)

    Margolis, Rachel; Myrskylä, Mikko

    2013-01-01

    We examine how family, money, and health explain variation in life satisfaction over the life cycle across seven global regions using data from the World Values Survey. With a life domain approach, we study whether the importance of the life domains varies by region and age groups and whether the variation explained by each factor is due to the magnitude or prevalence of each factor. Globally, family, money, and health explain a substantial fraction of life satisfaction, increasing from 12 percent in young adulthood to 15 percent in mature adulthood. Health is the most important factor, and its importance increases with age. Income is unimportant above age 50. Remarkably, the contribution of family is small across ages. Across regions health is most important in the wealthier, and income in the poorer regions of the world. Family explains a substantial fraction of life satisfaction only in Western Europe and Anglophone countries. Findings highlight that the population-level importance of family, money, and health in explaining variation in life satisfaction across regions is mainly attributable to the individual-level life satisfaction differences between people of different statuses rather than differences in the distribution of various states such as poor health across regions. PMID:24796263

  17. How precisely can the difference method determine the $\\pi$NN coupling constant?

    CERN Document Server

    Loiseau, B

    2000-01-01

    The Coulomb-like backward peak of the neutron-proton scattering differentialcross section is due to one-pion exchange. Extrapolation to the pion pole ofprecise data should allow to obtain the value of the charged pion-nucleoncoupling constant. This was classically attempted by the use of a smoothphysical function, the Chew function, built from the cross section. To improveaccuracy of such an extrapolation one has introduced a difference method. Itconsists of extrapolating the difference between the Chew function based onexperimental data and that built from a model where the pion-nucleon couplingis exactly known. Here we cross-check to which precision can work this novelextrapolation method by applying it to differences between models and betweendata and models. With good reference models and for the 162 MeV neutron-protonUppsala single energy precise data with a normalisation error of 2.3 , thevalue of the charged pion-nucleon coupling constant is obtained with anaccuracy close to 1.8

  18. Determining the Differences Between Academic Success and Perception Levels of Conservatory Students

    Directory of Open Access Journals (Sweden)

    Serkan OTACIOĞLU

    2016-07-01

    Full Text Available This research was studied about professionals in the field of music education students, with musical perception levels and some variable to reveal the differences that occur in this dimension. 50 students from Mimar Sinan University State Conservatory, 39 students from İstanbul University State Conservatory and 38 students from Karadeniz Technique University State Conservatory (N=127. Conservatory students, who are the students of the 2nd, 3 rd and 4th class in 2014-2015 academic year, have been participated which is a field research done by survey method.In this survey, two basic data collection tools were used. First data collection tool is “Student Information Form” which is aimed to obtain individual knowledge, second data collection tool is “Musical Perception Inventory” developed by G.Otacıoğlu and Aslan in 2007 to measure musical perception skills of students. Statistical analysis techniques were used to demonstrate the differences between the variables in the study. As a result of the study, there were statistically significant differences between demographic variables and the scores of musical perception

  19. Hydrogen Balmer series measurements and determination of Rydberg's constant using two different spectrometers

    International Nuclear Information System (INIS)

    Amrani, D

    2014-01-01

    This paper investigates the use of two different methods, the optical and the computer-aided diffraction-grating spectrometer, to measure the wavelength of visible lines of Balmer series from the hydrogen atomic spectrum and estimate the value of Rydberg's constant. Analysis and interpretation of data showed that both methods, despite their difference in terms of the type of equipment used, displayed good performance in terms of precision of measurements of wavelengths of spectral lines. A comparison was carried out between the experimental value of Rydberg's constant obtained with both methods and the accepted value. The results of Rydberg's constant obtained with both the optical and computer-aided spectrometers were 1.099 28 × 10 −7  m −1  and 1.095 13 × 10 −7  m −1  with an error difference of 0.17% and 0.20% compared to the accepted value 1.097 373 × 10 −7  m −1 , respectively. (paper)

  20. Determination of 238Pu and 239+240Pu in soils of different agricultural regions of Guatemala

    International Nuclear Information System (INIS)

    Gutierrez Martinez, Edwin Ariel

    1999-01-01

    This study allowed to determine the concentration of radioactivity alpha, due to contamination for plutonium in cultivated soils of different regions of Guatemala. They were carried out samplings for convenience in cultivated soils of 15 departments of the republic, determined in each soils sample, the activity concentration for plutonium 2 38 Plutonium and 239+240 Plutonium expressed in mili-becquerel by kilogram (mBq/Kg), which has been caused from all over the world by the different provoked liberations or accidents of radioactive particles to the atmosphere

  1. Elemental contents determination in two different zones of Mexico City on the 1987-88 and 1994-95 winters

    International Nuclear Information System (INIS)

    Diaz G, R.V.

    1996-01-01

    During the 1987-1988 and 1994-1995 winters, there were taken samples of aerosols in Mexico City, in two different places, using an integral type of sampler which determines the total amount of suspended particulates; these samples were analyzed by the multi-element analysis technique called PIXE (Proton Induced X-ray Emission). One of the sites corresponds to the Alvaro Obregon area and the other to the Azcapotzalco area (a place near to the18 de Marzo Refinery). There were determined 16 elements, heavy metals, whose concentrations show differences for both sites and periods, standing out for this study the behavior of S, V and Pb. (Author)

  2. Environmentally determined differences in the murine lung microbiota and their relation to alveolar architecture.

    Directory of Open Access Journals (Sweden)

    Yeojun Yun

    Full Text Available Commensal bacteria control the micro-ecology of metazoan epithelial surfaces with pivotal effect on tissue homeostasis and host defense. In contrast to the upper respiratory tract, the lower respiratory tract of healthy individuals has largely been considered free of microorganisms. To understand airway micro-ecology we studied microbiota of sterilely excised lungs from mice of different origin including outbred wild mice caught in the natural environment or kept under non-specific-pathogen-free (SPF conditions as well as inbred mice maintained in non-SPF, SPF or germ-free (GF facilities. High-throughput pyrosequencing of reverse transcribed 16S rRNA revealed metabolically active murine lung microbiota in all but GF mice. The overall composition across samples was similar at the phylum and family level. However, species richness was significantly different between lung microbiota from SPF and non-SPF mice. Non-cultivatable Betaproteobacteria such as Ralstonia spp. made up the major constituents and were also confirmed by 16S rRNA gene cloning analysis. Additionally, Pasteurellaceae, Enterobacteria and Firmicutes were isolated from lungs of non-SPF mice. Bacterial communities were detectable by fluorescent in situ hybridization (FISH at alveolar epithelia in the absence of inflammation. Notably, higher bacterial abundance in non-SPF mice correlated with more and smaller size alveolae, which was corroborated by transplanting Lactobacillus spp. lung isolates into GF mice. Our data indicate a common microbial composition of murine lungs, which is diversified through different environmental conditions and affects lung architecture. Identification of the microbiota of murine lungs will pave the path to study their influence on pulmonary immunity to infection and allergens using mouse models.

  3. Determination of available phosphorous for plants using different sources and 33P as a tracer

    International Nuclear Information System (INIS)

    Bastidas, O.G.

    1986-01-01

    In an experiment with flower-pots we compared for three different types of soil the amount of phosphorus available to rice and barley from commercial phosphorus sources. We used 33 P to label the soil and based on the specific activity of the plants growing in flower pots, in the presence and absence of commercial phosphorus sources, the available amount of phosphorus for the plant was calculated. This was done for every source in TSP whits for each soil type. It was found that available phosphorus for the plant in the three soil types were TSP >> Thomas and Reno >> Roca Salto y Pesca > Roca Huila

  4. The extraction and chromatographic determination of the essentials oils from Ocimum basilicum L. by different techniques

    Energy Technology Data Exchange (ETDEWEB)

    Soran, Maria Loredana; Varodi, Codruta; Lung, Ildiko; Surducan, Emanoil; Surducan, Vasile [National Institute for Research and Development of Isotopic and Molecular Technologies, 65-103 Donath, 400293 Cluj-Napoca (Romania); Cobzac, Simona Codruta, E-mail: loredana.soran@itim-cj.r [Babes-Bolyai University, Faculty of Chemistry and Chemical Engineering, 11 Arany Janos, 400028 Cluj-Napoca (Romania)

    2009-08-01

    Three different techniques (maceration, sonication and extraction in microwave field) were used for extraction of essential oils from Ocimum basilicum L. The extracts were analyzed by TLC/HPTLC technique and the fingerprint informations were obtained. The GC-FID was used to characterized the extraction efficiency and for identify the terpenic bioactive compounds. The most efficient extraction technique was maceration followed by microwave and ultrasound. The best extraction solvent system was ethyl ether + ethanol (1:1, v/v). The main compounds identified in Ocimum basilicum L. extracts were: {alpha} and {beta}-pinene (mixture), limonene, citronellol, and geraniol.

  5. Determination of hyperacute kidney rejection in different xenogeneic system by 133xenon washout technique

    International Nuclear Information System (INIS)

    Welter, H.; Schmidt, K.R.; Pfeifer, K.J.; Hammer, C.; Chaussy, C.

    1980-01-01

    1. 133 Xenon washout technique is suitable for studying all stages of xenogeneic kidney rejection. 2. Follow-up studies allow differentiation between kidney rejection and kidneys in shock. 3. Changes of intrarenal blood flow distribution correlate with the histologic changes caused by rejection. 4. Total blood flow measurements employing 133 xenon washout yield 10-20% lower values compared with venous outflow measurements. 5. Graft rejection in the xenogeneic cat-dog system can be significantly delayed by ALG pretreatment. 6. The beneficial effect of blood transfusion described in different clinical and experimental studies could not be found after pretreatment of dogs with fox red blood cells. (orig.)

  6. Determination of copper, manganese, nickel and zinc in different cigarette brands available in pakistan

    International Nuclear Information System (INIS)

    Siddiqui, I.; Hashmi, D.R.; Khan, F.A.

    2008-01-01

    Mean values of copper, manganese, nickel and zinc in different cigarette brands sold in Pakistan were found to be in the range of 8.61 to 94.67 macro g/g, 26.40 to 98.20 macro g/g, 0.61 to 8.58 macro g/g and 16.92 to 99.60 macro g/g, respectively, through Atomic Absorption Spectrophotometer (AAS). The results are discussed with reference to and in comparison with the mean average concentration of these elements reported in the cigarettes of other countries. (author)

  7. New way for determining electron energy levels in quantum dots arrays using finite difference method

    Science.gov (United States)

    Dujardin, F.; Assaid, E.; Feddi, E.

    2018-06-01

    Electronic states are investigated in quantum dots arrays, depending on the type of cubic Bravais lattice (primitive, body centered or face centered) according to which the dots are arranged, the size of the dots and the interdot distance. It is shown that the ground state energy level can undergo significant variations when these parameters are modified. The results were obtained by means of finite difference method which has proved to be easily adaptable, efficient and precise. The symmetry properties of the lattice have been used to reduce the size of the Hamiltonian matrix.

  8. The extraction and chromatographic determination of the essentials oils from Ocimum basilicum L. by different techniques

    International Nuclear Information System (INIS)

    Soran, Maria Loredana; Varodi, Codruta; Lung, Ildiko; Surducan, Emanoil; Surducan, Vasile; Cobzac, Simona Codruta

    2009-01-01

    Three different techniques (maceration, sonication and extraction in microwave field) were used for extraction of essential oils from Ocimum basilicum L. The extracts were analyzed by TLC/HPTLC technique and the fingerprint informations were obtained. The GC-FID was used to characterized the extraction efficiency and for identify the terpenic bioactive compounds. The most efficient extraction technique was maceration followed by microwave and ultrasound. The best extraction solvent system was ethyl ether + ethanol (1:1, v/v). The main compounds identified in Ocimum basilicum L. extracts were: α and β-pinene (mixture), limonene, citronellol, and geraniol.

  9. A procedure for the radioimmunochemical determination of antigens with different structures

    International Nuclear Information System (INIS)

    Galoci, J.; Machan, V.

    1990-01-01

    To a solution of a specific antibody, its antigen labelled with iodine 125, and of the unknown sample is added animal (e.g., goat) antibody against rabbit immunoglobulin immobilized on modified microcrystalline cellulose; always the same quantities are applied always for the same time. After incubation for 1 hr at 20 degC, the immunochemical complex formed is centrifuged and its radioactivity is measured, and the amount of the antigen in sample is determined by comparison with standards. The procedure is applicable to antigens with any structure. Assets of the separating system include a very good stability in solution, a low value of nonspecific bonding and a low sedimentation velocity of the particles used. The procedure is well suited to the quantitation of antigens present in very low concentrations in blood serum, urine, milk, and extracts from tissues or animal feed. In a modification of the procedure, the animal antibody against rabbit immunoglobulin is immobilized on the surface of modified cellulose particles 5 to 15 μm in size exhibiting a very low sedimentation velocity, activated with 1,1-carbonyldiimidazole. (M.D.)

  10. Determination of Heavy Metals in Alpinia oxyphylla Miq. Collected from Different Cultivation Regions

    Directory of Open Access Journals (Sweden)

    Dan Zhou

    2016-01-01

    Full Text Available 20 batches of Alpinia oxyphylla Miq. were collected from Yunnan, Guangdong, Guangxi, and Hainan province in China. The contents of heavy metals of As, Hg, Pb, Cd, and Cu were determined and compared. The results indicated that geographical source might be a major factor to influence the contents of heavy metals of arsenic (As, mercury (Hg, lead (Pb, cadmium (Cd, and copper (Cu in Alpinia oxyphylla Miq. Compared to the criteria of heavy metals, the contents of As, Hg, Pb, and Cd in almost all the samples were in accordance with The Green Trade Standards. The contents of Cu were higher than the criteria for heavy metals except the samples from Changxing town, Qiongzhong county, Maoyang town, Qiongzhong county, Wupo town, Tunchang county, and Nanlv town, Tunchang county, in Hainan province. The best cultivation regions of Alpinia oxyphylla Miq. were from Changxing town, Qiongzhong county, Maoyang town, Qiongzhong county, Wupo town, Tunchang county, and Nanlv town, Tunchang county, in Hainan province. This research would provide the scientific basis for quality control and standardization of Alpinia oxyphylla Miq.

  11. Chromatin and lamin A determine two different mechanical response regimes of the cell nucleus.

    Science.gov (United States)

    Stephens, Andrew D; Banigan, Edward J; Adam, Stephen A; Goldman, Robert D; Marko, John F

    2017-07-07

    The cell nucleus must continually resist and respond to intercellular and intracellular mechanical forces to transduce mechanical signals and maintain proper genome organization and expression. Altered nuclear mechanics is associated with many human diseases, including heart disease, progeria, and cancer. Chromatin and nuclear envelope A-type lamin proteins are known to be key nuclear mechanical components perturbed in these diseases, but their distinct mechanical contributions are not known. Here we directly establish the separate roles of chromatin and lamin A/C and show that they determine two distinct mechanical regimes via micromanipulation of single isolated nuclei. Chromatin governs response to small extensions (<3 μm), and euchromatin/heterochromatin levels modulate the stiffness. In contrast, lamin A/C levels control nuclear strain stiffening at large extensions. These results can be understood through simulations of a polymeric shell and cross-linked polymer interior. Our results provide a framework for understanding the differential effects of chromatin and lamin A/C in cell nuclear mechanics and their alterations in disease. © 2017 Stephens et al. This article is distributed by The American Society for Cell Biology under license from the author(s). Two months after publication it is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

  12. Application of UHPLC for the determination of free amino acids in different cheese varieties.

    Science.gov (United States)

    Mayer, Helmut K; Fiechter, Gregor

    2013-10-01

    A rapid ultra-high performance liquid chromatography (UHPLC) protocol for the determination of amino acids as their respective 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate (AQC) derivatives was successfully applied for assessing free amino acid levels in commercial cheese samples representing typical product groups (ripening protocols) in cheesemaking. Based on the Waters AccQ.Tag™ method as a high performance liquid chromatography (HPLC) amino acid solution designed for hydrolyzate analyses, method adaptation onto UHPLC was performed, and detection of AQC derivatives was changed from former fluorescence (λ(Ex) 250 nm/λ(Em) 395 nm) to UV (254 nm). Compared to the original HPLC method, UHPLC proved to be superior by facilitating excellent separations of 18 amino acids within 12 min only, thus demonstrating significantly shortened runtimes (>35 min for HPLC) while retaining the original separation chemistry and amino acid elution pattern. Free amino acid levels of the analyzed cheese samples showed a high extent of variability depending on the cheese type, with highest total amounts found for original Italian extra-hard cheeses (up to 9,000 mg/100 g) and lowest for surface mold- or bacterial smear-ripened soft cheeses (200-600 mg/100 g). Despite the intrinsic variability in both total and specific concentrations, the established UHPLC method enabled reliable and interference-free amino acid profiling throughout all cheese types, thus demonstrating a valuable tool to generate high quality data for the characterization of cheese ripening.

  13. RESEARCH ON THE MEAT PRODUCTION DIFFERENCES DETERMINED BY THE BIRTH MONTH OF THE FATTENED STEERS

    Directory of Open Access Journals (Sweden)

    Agatha POPESCU

    2014-04-01

    Full Text Available The purpose of the paper was to assess the effect of the birth month on some meat production characters such as live weight at the age of 180 days, live weight at the age of 365 days and daily gain during the fattening period in progeny testing for bulls' breeding value estimation in order to correct the biases determined by this environmental factor. In this purpose, the following linear mathematical model was used: xij=m . ai . eij, where xij - the live record of the "j" steer in the month "i" (i=1,2,....12, m- geometrical average of the meat production characters taken into account, ai- the multiplicative effect of the birth month "i" and eij – the residual multiplicative effect. A number of 1,705 half-brothers belonging to 105 Friesian bulls from Romania was included in this progeny testing. In order to eliminate the biases âi, adequate multiplicative adjusting factors were calculated as 1/âi.. The conclusion was that the effects of birth month on the meat production in terms of live weight at the age of 180 days, live weight at the age of 365 days and daily gain during the fattening period should not be ignored, on the contrary, they should be eliminated by correcting the real data using corresponding adjusting factors. Therefore, adjusting factors are justifed to be used in order to improve the accuracy of the bulls' breeding value estimation for meat production.

  14. Determination of enrichment of recycle uranium fuels for different burnup values

    International Nuclear Information System (INIS)

    Zabunoglu, Okan H.

    2008-01-01

    Uranium (U) recovered from spent LWR fuels by reprocessing, which contains small amounts of U-236, is to be enriched before being re-irradiated as the recycle U. During the enrichment of recovered U in U-235, the mass fraction of U-236 also increases. Since the existence of U-236 in the recycle U has a negative effect on neutron economy, a greater enrichment of U-235 in the recycle U is required for reaching the same burnup as can be reached by the fresh U fuel. Two burnup values play the most important role in determining the enrichment of recycle U: (1) discharge burnup of spent fuel from which the recycle U is obtained and (2) desired discharge burnup of the recycle U fuel. A step-by-step procedure for calculating the enrichment of the recycle U as a function of these two burnup values is introduced. The computer codes MONTEBURNS and ORIGEN-S are made use of and a three-component (U-235, U-236, U-238) enrichment scheme is applied for calculating the amount of U-236 in producing the recycle U from the recovered U. As was aimed, the resulting expression is simple enough for quick/hand calculations of the enrichment of the recycle U for any given discharge burnup of spent fuel and for any desired discharge burnup of the recycle U fuel, most accurately within the range of 33,000-50,000 MWd/tonU

  15. Determination of factor of hydrogen permeation reduction (PRF) for different protective coatings over vanadium

    International Nuclear Information System (INIS)

    Afanasyev, S.; Kulsartov, T.; Shestakov, V.; Chikhray, Y.; Smith, D.

    2002-01-01

    Selection of structural materials for liquid-metal system as well as for another system and constructions of nuclear energy plants must be carried out and based on specified demands depending on conditions of these materials functioning. Specific demand is its compatibility with liquid metals. Design of reactors with liquid-metal coolant (Li, PbLi 17 ) which reproduces tritium arise additional demand to structural materials. This demand is a creation of structural material or protective barrier with minimum acceptable value of tritium permeation through itself or with maximum permeation reduction factor (PRF). Vanadium and vanadium alloys are supposed to be use as a blanket structural material in such nuclear energy plants. Worked out at first stage of studies vanadium coatings should have stability of its characteristics at temperature 800 deg. C under influence of hydrogen. Given work shows the experimental results on testing of protective coatings over vanadium: glass-ceramic coating and CaO-base coating. PRF for every coating and its changes depending on thermo-capacity of vanadium sample with coating was determined by method of hydrogen permeation. The results of experiments would be used at the development of cooling loops of reactor core protection with liquid-metal coolant

  16. Simultaneous Determination of Different Anions in Milk Samples Using Ion Chromatography with Conductivity Detection

    Directory of Open Access Journals (Sweden)

    Gülçin Gümüş Yılmaz

    2016-12-01

    Full Text Available The description of a simple method for simultaneous determination of chloride, nitrate, sulfate, iodide, phosphate, thiocyanate, perchlorate, and orotic acid in milk samples was outlined. The method involves the use of dialysis cassettes for matrix elimination, followed by ion chromatography on a high capacity anion exchange column with suppressed conductivity detection. The novelty of dialysis process was that it did not need any chemical and organic solvent for elimination of macromolecules such as fat, carbohydrates and proteins from milk samples. External standard calibration curves for these analytes were linear with great correlation coefficients. The relative standard deviations of analyte concentrations were acceptable both inter-day and intra-day evaluations. Under optimized conditions, the limit of detection (Signal-to-Noise ratio = 3 for chloride, phosphate, thiocyanate, perchlorate, iodide, nitrate, sulfate, and orotate was found to be 0.012, 0.112, 0.140, 0.280, 0.312, 0.516, 0.520, and 0.840 mg L−1, respectively. Significant results were obtained for various spiked milk samples with % recovery in the range of 93.88 - 109.75 %. The proposed method was successfully applied to milk samples collected from Istanbul markets. The advantages of the method described herein are reagent-free, simple, and reliable.

  17. Determination of Heavy Metals in Alpinia oxyphylla Miq. Collected from Different Cultivation Regions.

    Science.gov (United States)

    Zhou, Dan; Fu, Yurong; Lai, Weiyong; Zhang, Junqing

    2016-01-01

    20 batches of Alpinia oxyphylla Miq. were collected from Yunnan, Guangdong, Guangxi, and Hainan province in China. The contents of heavy metals of As, Hg, Pb, Cd, and Cu were determined and compared. The results indicated that geographical source might be a major factor to influence the contents of heavy metals of arsenic (As), mercury (Hg), lead (Pb), cadmium (Cd), and copper (Cu) in Alpinia oxyphylla Miq. Compared to the criteria of heavy metals, the contents of As, Hg, Pb, and Cd in almost all the samples were in accordance with The Green Trade Standards. The contents of Cu were higher than the criteria for heavy metals except the samples from Changxing town, Qiongzhong county, Maoyang town, Qiongzhong county, Wupo town, Tunchang county, and Nanlv town, Tunchang county, in Hainan province. The best cultivation regions of Alpinia oxyphylla Miq. were from Changxing town, Qiongzhong county, Maoyang town, Qiongzhong county, Wupo town, Tunchang county, and Nanlv town, Tunchang county, in Hainan province. This research would provide the scientific basis for quality control and standardization of Alpinia oxyphylla Miq.

  18. Major differences between human atopic dermatitis and murine models, as determined by using global transcriptomic profiling

    DEFF Research Database (Denmark)

    Ewald, David A.; Noda, Shinji; Oliva, Margeaux

    2017-01-01

    , and a comparison of these models with the human AD transcriptomic fingerprint is lacking. Objective We sought to evaluate the transcriptomic profiles of 6 common murine models and determine how they relate to human AD skin. Methods Transcriptomic profiling was performed by using microarrays and quantitative RT......-PCR on biopsy specimens from NC/Nga, flaky tail, Flg-mutated, ovalbumin-challenged, oxazolone-challenged, and IL-23–injected mice. Gene expression data of patients with AD, psoriasis, and contact dermatitis were obtained from previous patient cohorts. Criteria of a fold change of 2 or greater and a false...... discovery rate of 0.05 or less were used for gene arrays. Results IL-23–injected, NC/Nga, and oxazolone-challenged mice show the largest homology with our human meta-analysis–derived AD transcriptome (37%, 18%, 17%, respectively). Similar to human AD, robust TH1, TH2, and also TH17 activation are seen in IL...

  19. Determination of hydraulic conductivity from grain-size distribution for different depositional environments

    KAUST Repository

    Rosas, Jorge

    2013-06-06

    Over 400 unlithified sediment samples were collected from four different depositional environments in global locations and the grain-size distribution, porosity, and hydraulic conductivity were measured using standard methods. The measured hydraulic conductivity values were then compared to values calculated using 20 different empirical equations (e.g., Hazen, Carman-Kozeny) commonly used to estimate hydraulic conductivity from grain-size distribution. It was found that most of the hydraulic conductivity values estimated from the empirical equations correlated very poorly to the measured hydraulic conductivity values with errors ranging to over 500%. To improve the empirical estimation methodology, the samples were grouped by depositional environment and subdivided into subgroups based on lithology and mud percentage. The empirical methods were then analyzed to assess which methods best estimated the measured values. Modifications of the empirical equations, including changes to special coefficients and addition of offsets, were made to produce modified equations that considerably improve the hydraulic conductivity estimates from grain size data for beach, dune, offshore marine, and river sediments. Estimated hydraulic conductivity errors were reduced to 6 to 7.1m/day for the beach subgroups, 3.4 to 7.1m/day for dune subgroups, and 2.2 to 11m/day for offshore sediments subgroups. Improvements were made for river environments, but still produced high errors between 13 and 23m/day. © 2013, National Ground Water Association.

  20. Comparative use of different emission measurement approaches to determine methane emissions from a biogas plant.

    Science.gov (United States)

    Reinelt, Torsten; Delre, Antonio; Westerkamp, Tanja; Holmgren, Magnus A; Liebetrau, Jan; Scheutz, Charlotte

    2017-10-01

    A sustainable anaerobic biowaste treatment has to mitigate methane emissions from the entire biogas production chain, but the exact quantification of these emissions remains a challenge. This study presents a comparative measurement campaign carried out with on-site and ground-based remote sensing measurement approaches conducted by six measuring teams at a Swedish biowaste treatment plant. The measured emissions showed high variations, amongst others caused by different periods of measurement performance in connection with varying operational states of the plant. The overall methane emissions measured by ground-based remote sensing varied from 5 to 25kgh -1 (corresponding to a methane loss of 0.6-3.0% of upgraded methane produced), depending on operating conditions and the measurement method applied. Overall methane emissions measured by the on-site measuring approaches varied between 5 and 17kgh -1 (corresponding to a methane loss of 0.6 and 2.1%) from team to team, depending on the number of measured emission points, operational state during the measurements and the measurement method applied. Taking the operational conditions into account, the deviation between different approaches and teams could be explained, in that the two largest methane-emitting sources, contributing about 90% of the entire site's emissions, were found to be the open digestate storage tank and a pressure release valve on the compressor station. Copyright © 2017. Published by Elsevier Ltd.

  1. TLC determination of some flavanones in the buds of different genus Populus species and hybrids

    Directory of Open Access Journals (Sweden)

    Pobłocka-Olech Loretta

    2018-06-01

    Full Text Available Flavonoids in the buds of eight Populus species and hybrids were detected and compared with the aid of an optimized TLC method. Separation of 17 flavonoid aglycones belonging to different groups, namely, flavones, flavonols, flavanones and flavanonols, previously described as constituents of poplar buds, was performed on silica gel plates using a hexane/ethyl acetate/formic acid (60:40:1.3, V/V/V mixture as the mobile phase. Pinocembrin and pinostrobin were found in the majority of analyzed poplar buds. For quantitative analysis of both compounds, two TLC evaluation modes, densitometric and videodensitometric, were compared and the established methods were validated. Concentrations of flavanones in some extracts differed slightly or significantly due to the analyzed plant matrix complexity and the TLC evaluation mode applied. Poplar buds rich in flavanones originated from P. × canadensis ‘Robusta’ (1.82 and 2.23 g per 100 g, resp. and P. balsamifera (1.17 and 2.24 g per 100 g, resp..

  2. Determining the Time of Flight and Speed of Sound on Different types of Edible Oil

    Science.gov (United States)

    Azman, N. A.; Hamid, S. B. Abd

    2017-11-01

    Edible oil is most often plant-based oils that have been extracted from various seeds. There are cases where the fully virgin edible oil was found to be a fraud. The adulterated edible oil indicates the intentional, fraudulent addition of extraneous, improper or cheaper ingredients puts into the oil or the dilution or removal of some valuable ingredient of the oil in order to increase profits. Hence, decrease the reliability of the Malaysian food product quality. This research was done by using the method of time of flight obtained using the Texas Instrument board, TDC1000-TDC7200 EVM connected to an ultrasonic transducer with 1 MHz frequency. The authors measured the time of flight and temperatures controlled from 20°C to 40°C of five vegetable oils (olive oil, sunflower oil, corn oil, coconut oil, and mustard oil). The value is observed and compared with other research from the literature review. From the study, time of flight values decreases exponentially while speed of sound value increases. This relationship will be useful in spectrum unfolding method to investigate the adulteration in different type of edible oil.This research outcome is to investigate the quality value of the different type of edible oil while eliminates the issues where the quality of Malaysian food product is not reliable.

  3. EMG analysis tuned for determining the timing and level of activation in different motor units.

    Science.gov (United States)

    Lee, Sabrina S M; Miara, Maria de Boef; Arnold, Allison S; Biewener, Andrew A; Wakeling, James M

    2011-08-01

    Recruitment patterns and activation dynamics of different motor units greatly influence the temporal pattern and magnitude of muscle force development, yet these features are not often considered in muscle models. The purpose of this study was to characterize the recruitment and activation dynamics of slow and fast motor units from electromyographic (EMG) recordings and twitch force profiles recorded directly from animal muscles. EMG and force data from the gastrocnemius muscles of seven goats were recorded during in vivo tendon-tap reflex and in situ nerve stimulation experiments. These experiments elicited EMG signals with significant differences in frequency content (p<0.001). The frequency content was characterized using wavelet and principal components analysis, and optimized wavelets with centre frequencies, 149.94 Hz and 323.13 Hz, were obtained. The optimized wavelets were used to calculate the EMG intensities and, with the reconstructed twitch force profiles, to derive transfer functions for slow and fast motor units that estimate the activation state of the muscle from the EMG signal. The resulting activation-deactivation time constants gave r values of 0.98-0.99 between the activation state and the force profiles. This work establishes a framework for developing improved muscle models that consider the intrinsic properties of slow and fast fibres within a mixed muscle, and that can more accurately predict muscle force output from EMG. Copyright © 2011 Elsevier Ltd. All rights reserved.

  4. Differences in regional emissions in China's transport sector: Determinants and reduction strategies

    International Nuclear Information System (INIS)

    Xu, Bin; Lin, Boqiang

    2016-01-01

    With recent surge in the number of vehicles, particularly private vehicles, the transport sector has significantly contributed to the increase in energy consumption and carbon dioxide emissions in China. Most of the existing researches utilized time series data to investigate the factors influencing transport sector's carbon dioxide emission at the national level while neglecting the level of regional differences. This paper adopts provincial panel data from 2000 to 2012 and panel data models to examine the key driving forces of carbon dioxide emissions in the transport sector at the regional level in China. The estimation results show that the impacts of urbanization on carbon dioxide emissions in the transport sector vary across regions and decline continuously from the western region to the eastern and central regions. Private vehicles are more important than cargo turnover in emission reduction because of its relatively inefficient and excessive growth. The role of energy efficiency improvement in mitigating carbon dioxide emissions in the three regions varies due to significant differences in research and development investment and management efficiency. Hence, in order to effectively achieve emission reduction, local governments should consider all these factors as well as regional heterogeneity in developing appropriate mitigation policies. - Highlights: • The factors of carbon dioxide emissions in China's transport sector were explored. • The impact of urbanization on carbon dioxide emissions varies across regions. • Private vehicles are more critical than cargo turnover in emission reduction. • The role of energy efficiency in the three regions is exactly the opposite.

  5. Differences in tuberculin reactivity as determined in a veterans administration employee health screening program.

    Science.gov (United States)

    Mehta, Sanjay R; MacGruder, Cathy; Looney, David; Johns, Scott; Smith, Davey M

    2009-04-01

    In response to a difference in pricing, the San Diego Veterans Administration Medical Center changed its tuberculin preparation from Tubersol to Aplisol in the fall of 2006. Following the change, an increased number of employee skin test conversions was noted. Employee tuberculin skin test converters from 2006 were screened with the QuantiFERON Gold (QFT-G) gamma interferon release assay. Those employees who tested negative by QFT-G were asked to repeat their skin test with both Tubersol and Aplisol tuberculin preparations. Of the new purified protein derivative converters, 12 of 14 returned for repeat testing with QFT-G, and the assay was negative for 83% (10/12), positive for 8% (1/12), and indeterminate for 8% (1/12) of the individuals. Nine of the individuals who were QFT-G negative agreed to repeat skin testing with both tuberculin preparations, and 7/8 (87.5%) demonstrated reactivity with the Aplisol preparation, while 0/8 (0%) reacted to the Tubersol preparation. A change from Tubersol to Aplisol resulted in elevated tuberculin skin test conversion rates that may be due to false-positive reactions. The differences in skin test reactivity between preparations support CDC guidelines that recommend that institutions should not change tuberculin preparations, as doing so may falsely increase the number of positive reactions.

  6. Determination of hydraulic conductivity from grain-size distribution for different depositional environments

    KAUST Repository

    Rosas, Jorge; Lopez Valencia, Oliver Miguel; Missimer, Thomas M.; Coulibaly, Kapo M.; Dehwah, Abdullah; Sesler, Kathryn; Rodri­ guez, Luis R. Lujan; Mantilla, David

    2013-01-01

    Over 400 unlithified sediment samples were collected from four different depositional environments in global locations and the grain-size distribution, porosity, and hydraulic conductivity were measured using standard methods. The measured hydraulic conductivity values were then compared to values calculated using 20 different empirical equations (e.g., Hazen, Carman-Kozeny) commonly used to estimate hydraulic conductivity from grain-size distribution. It was found that most of the hydraulic conductivity values estimated from the empirical equations correlated very poorly to the measured hydraulic conductivity values with errors ranging to over 500%. To improve the empirical estimation methodology, the samples were grouped by depositional environment and subdivided into subgroups based on lithology and mud percentage. The empirical methods were then analyzed to assess which methods best estimated the measured values. Modifications of the empirical equations, including changes to special coefficients and addition of offsets, were made to produce modified equations that considerably improve the hydraulic conductivity estimates from grain size data for beach, dune, offshore marine, and river sediments. Estimated hydraulic conductivity errors were reduced to 6 to 7.1m/day for the beach subgroups, 3.4 to 7.1m/day for dune subgroups, and 2.2 to 11m/day for offshore sediments subgroups. Improvements were made for river environments, but still produced high errors between 13 and 23m/day. © 2013, National Ground Water Association.

  7. Determination of the neutron spectrum at different locations in the Argentine RA-1 Reactor

    International Nuclear Information System (INIS)

    Lerner, A.M.; Madariaga, M.R.

    1998-01-01

    Full text: It is well known that the RA-1 reactor is used to irradiate different types of materials with neutrons. The Radio dosimetry Group (which belongs to the Nuclear Regulatory Authority) uses its fast column for the design, calibration and set up of criticality dosimeters as well as for a quick assessment of the dose to workers in case of an accident. With such purpose, Au(1), Au under Cd and In(2) foils were irradiated to estimate absolute thermal, epithermal and fast neutron fluxes at the irradiation location. The accuracy of this estimation is higher when the response to the present neutron spectrum of the different materials constituting the detectors is better known. This, in turn, requires the previous knowledge of such spectrum (a detailed energy dependence of neutron flux) at the analysed location. In this work a neutronic calculation is presented at the fast irradiation location. The whole calculation was carried out following two different methodologies, and considering a power of 40 kW. The reactor and its surroundings were represented by a simplified one-dimensional model, as a concentric cylindrical set of regions. Figures are drawn representing fast and thermal fluxes (with the cut at 0.4 eV) as a function of the distance to the core centre. The neutron flux (in n/cm 2 sec.eV) as a function of energy is also shown at the fast irradiation location. Values of flux (in n/cm 2 .sec.eV) are also provided as a function of energy in other typical locations, as well as the equivalent integrated flux values (in n/cm 2 .sec). ((1) According to the reaction Au 197 (n,γ)Au 198 , having a cross section of σ 0 =98.8b for thermal neutrons. (2) According to the reaction In 115 (n,n')In 115m , with a cross section of some 70 mb for neutrons with energies above 1.2MeV). (author) [es

  8. Different indicators of socioeconomic status and their relative importance as determinants of health in old age.

    Science.gov (United States)

    Darin-Mattsson, Alexander; Fors, Stefan; Kåreholt, Ingemar

    2017-09-26

    Socioeconomic status has been operationalised in a variety of ways, most commonly as education, social class, or income. In this study, we also use occupational complexity and a SES-index as alternative measures of socioeconomic status. Studies show that in analyses of health inequalities in the general population, the choice of indicators influence the magnitude of the observed inequalities. Less is known about the influence of indicator choice in studies of older adults. The aim of this study is twofold: i) to analyse the impact of the choice of socioeconomic status indicator on the observed health inequalities among older adults, ii) to explore whether different indicators of socioeconomic status are independently associated with health in old age. We combined data from two nationally representative Swedish surveys, providing more than 20 years of follow-up. Average marginal effects were estimated to compare the association between the five indicators of SES, and three late-life health outcomes: mobility limitations, limitations in activities of daily living (ADL), and psychological distress. All socioeconomic status indicators were associated with late-life health; there were only minor differences in the effect sizes. Income was most strongly associated to all indicators of late-life health, the associations remained statistically significant when adjusting for the other indicators. In the fully adjusted models, education contributed to the model fits with 0-3% (depending on the outcome), social class with 0-1%, occupational complexity with 1-8%, and income with 3-18%. Our results indicate overlapping properties between socioeconomic status indicators in relation to late-life health. However, income is associated to late-life health independently of all other variables. Moreover, income did not perform substantially worse than the composite SES-index in capturing health variation. Thus, if the primary objective of including an indicator of socioeconomic

  9. Determination of drugs and drug-like compounds in different samples with direct analysis in real time mass spectrometry.

    Science.gov (United States)

    Chernetsova, Elena S; Morlock, Gertrud E

    2011-01-01

    Direct analysis in real time (DART), a relatively new ionization source for mass spectrometry, ionizes small-molecule components from different kinds of samples without any sample preparation and chromatographic separation. The current paper reviews the published data available on the determination of drugs and drug-like compounds in different matrices with DART-MS, including identification and quantitation issues. Parameters that affect ionization efficiency and mass spectra composition are also discussed. Copyright © 2011 Wiley Periodicals, Inc.

  10. D10 value determination for Escherichia coli O157:H7 in different cultivations

    International Nuclear Information System (INIS)

    Oliveira, Sergio Eduardo M. de; Pires, Luis Fernando G.; Vital, Helio de C.

    2002-01-01

    Escherichia coli serum type O157:H7 is a highly pathogenic bacterium. Inside the human body, that microorganism causes a disease that leads to bloody diarrhea, stoppage of kidney functions and clots in the brain. That type of infection has been related to the consumption of different varieties of foods, mainly meat and other products of animal origin. Irradiation is an efficient method for elimination of pathogenic and spoiling microorganisms in foods. Thus, this work investigates the use of gamma irradiation for elimination of Escherichia coli O157:H7. For that purpose, inoculated samples in trypticase soy broth and saline solution 0,85% media were exposed to several gamma radiation doses. Counting the number of surviving bacteria yielded the following D 10 values for Escherichia coli O157:H7: 98±7 Gy, in trypticase soy broth and 49±4 Gy in saline solution 0,85% medium. (author)

  11. Stilbazolium Merocyanine Dye Determination in Different Solutions, Concentrations and Colloids Using SERS

    DEFF Research Database (Denmark)

    Pajchrowski, Grzegorz; Abdali, Salim; Nørbygaard, Thomas

    2006-01-01

    Surface Enhanced Raman Scattering (SERS) measurements were carried out on stilbazolium merocyanine dye in methanol and pyridine solvents. Both solutions were measured in series of concentrations, covering a range of 5·10-5 M to 5·10-8 M. In these measurements Ag and Au colloids were used and the ......Surface Enhanced Raman Scattering (SERS) measurements were carried out on stilbazolium merocyanine dye in methanol and pyridine solvents. Both solutions were measured in series of concentrations, covering a range of 5·10-5 M to 5·10-8 M. In these measurements Ag and Au colloids were used...... report here on the success of using SERS to obtain Raman spectra of merocyanine dye at very low concentration in an attempt of new approach, which can be used for further investigations of the dye. The SERS spectra will here be reported and the results from different solutions, colloids, concentrations...

  12. Shear strain determination of the polymer polydimethysiloxane (PMDS) using digital image correlation in different temperatures

    Energy Technology Data Exchange (ETDEWEB)

    De Oliveira, G N [Pos-graduacao em Engenharia Mecanica, TEM/PGMEC, Universidade Federal Fluminense, Rua Passo da Patria, 156, Niteroi, R.J., Brazil, Cep.: 24.210-240 (Brazil); Nunes, L C S [Laboratorio de Mecanica Teorica e Aplicada, Departamento de Engenharia Mecanica, Universidade Federal Fluminense, Rua Passo da Patria, 156, Niteroi, R.J., Brazil, Cep.: 24.210-240 (Brazil); Dos Santos, P A M, E-mail: pams@if.uff.br [Instituto de Fisica, Laboratorio de Optica Nao-linear e Aplicada, Universidade Federal Fluminense, Av. Gal. Nilton Tavares de Souza, s/n, Gragoata, Niteroi, R.J., Brazil, Cep.:24.210-346 (Brazil)

    2011-01-01

    In the present work a digital image correlation (DIC) method is used in order to analyze the adhesive shear modulus of poly-dimethylsiloxane (PDMS) submitted to different loads and temperatures. This is an optical-numerical full-field surface displacement measurement method. It is based on a comparison between two images of a specimen coated by a random speckled pattern in the undeformed and in the deformed states. A single lap joint testing is performed. This is a standard test specimen for characterizing adhesive properties and it is considered the simplest form of adhesive joints. For the single lap joint specimen, steel adherends are bonded using a flexible rubber elastic polymer (PDMS), which is a commercially available silicone elastic rubber.

  13. Self-Esteem Trajectories and Their Social Determinants in Adolescents With Different Levels of Cognitive Ability.

    Science.gov (United States)

    Morin, Alexandre J S; Arens, A Katrin; Tracey, Danielle; Parker, Philip D; Ciarrochi, Joseph; Craven, Rhonda G; Maïano, Christophe

    2017-11-01

    This study examines the development of self-esteem in a sample of 138 Australian adolescents (90 males; 48 females) with cognitive abilities in the lowest 15% (L-CA) and a matched sample of 556 Australian adolescents (312 males; 244 females) with average to high levels of cognitive abilities (A/H-CA). These participants were measured annually (Grade 7 to 12). The findings showed that adolescents with L-CA and A/H-CA experience similar high and stable self-esteem trajectories that present similar relations with key predictors (sex, school usefulness and dislike, parenting, and peer integration). Both groups revealed substantial gender differences showing higher levels of self-esteem for adolescent males remaining relatively stable over time, compared to lower levels among adolescent females which decreased until midadolescence before increasing back.

  14. Determination of geometry correction factors to different vials used to radiopharmaceutical activity measurements

    International Nuclear Information System (INIS)

    Kuahara, Lilian T.; Correa, Eduardo L.; Potiens, Maria da Penha A.

    2015-01-01

    The aim of this study is to present the geometry correction factors and their respective uncertainties to P6 and 10R vials and 3 mL and 5 mL plastic syringes using the reference activity meters present at the Laboratorio de Calibracao de Instrumentos (LCI), IPEN the secondary standard system Capintec NPL-CRC radionuclide calibrator, with traceability to the National Physics Laboratory (NPL), England and the work standard Capintec CRC-15BT and the Capintec CRC-25R. The procedure was made using 99m Tc, which is responsible for about 80 % of the routine procedures in a nuclear medicine service. Variations of up to 40 % between different vials using the same radionuclide were found. (author)

  15. Experimental determination of nanofluid specific heat with SiO2 nanoparticles in different base fluids

    Science.gov (United States)

    Akilu, S.; Baheta, A. T.; Sharma, K. V.; Said, M. A.

    2017-09-01

    Nanostructured ceramic materials have recently attracted attention as promising heat transfer fluid additives owing to their outstanding heat storage capacities. In this paper, experimental measurements of the specific heats of SiO2-Glycerol, SiO2-Ethylene Glycol, and SiO2-Glycerol/Ethylene Glycol mixture 60:40 ratio (by mass) nanofluids with different volume concentrations of 1.0-4.0% have been carried out using differential scanning calorimeter at temperatures of 25 °C and 50 °C. Experimental results indicate lower specific heat capacities are found with SiO2 nanofluids compared to their respective base fluids. The specific heat was decreasing with the increase of concentration, and this decrement depends on upon the type of the base fluid. It is observed that temperature has a positive impact on the specific heat capacity. Furthermore, the experimental values were compared with the theoretical model predictions, and a satisfactory agreement was established.

  16. Determination of fissile fraction in MOX (mixed U + Pu oxides) fuels for different burnup values

    International Nuclear Information System (INIS)

    Ozdemir, Levent; Acar, Banu Bulut; Zabunoglu, Okan H.

    2011-01-01

    When spent Light Water Reactor fuels are processed by the standard Purex method of reprocessing, plutonium (Pu) and uranium (U) in spent fuel are obtained as pure and separate streams. The recovered Pu has a fissile content (consisting of 239 Pu and 241 Pu) greater than 60% typically (although it mainly depends on discharge burnup of spent fuel). The recovered Pu can be recycled as mixed-oxide (MOX) fuel after being blended with a fertile U makeup in a MOX fabrication plant. The burnup that can be obtained from MOX fuel depends on: (1) isotopic composition of Pu, which is closely related to the discharge burnup of spent fuel from which Pu is recovered; (2) the type of fertile U makeup material used (depleted U, natural U, or recovered U); and (3) fraction of makeup material in the mix (blending ratio), which in turn determines the total fissile fraction of MOX. Using the Non-linear Reactivity Model and the code MONTEBURNS, a step-by-step procedure for computing the total fissile content of MOX is introduced. As was intended, the resulting expression is simple enough for quick/hand calculations of total fissile content of MOX required to reach a desired burnup for a given discharge burnup of spent fuel and for a specified fertile U makeup. In any case, due to non-fissile (parasitic) content of recovered Pu, a greater fissile fraction in MOX than that in fresh U is required to obtain the same burnup as can be obtained by the fresh U fuel.

  17. Determination of morphological and cytological differences between diploid and tetraploid watermelon plants

    Directory of Open Access Journals (Sweden)

    İsmail ŞİMŞEK

    2013-06-01

    Full Text Available In the seedless watermelon breeding programme, firstly, tetraploid parents must be developed by the breeders. When diploid watermelon lines treated with colchicine and oryzaline in vivo and vitro conditions, tetraploid plants could be obtained. The diploid and tetraploid watermelon plants should be selected within the population. For this reason, some markers (morphological, isozyme, cytological and molecular techniques are needed to separate from diploid and tetraploid plants. Chromosome counts and DNA content of diploid and tetraploid plants as a result of measurement of flow cytometry distinction can be made definitively. However, the laboratory infrastructure required to implement each method, is not economical. The purpose of this study is to select the tetraploid watermelon plants at M1 stage from populations applied colchicine and oryzaline with morphological anda cytological investigations in in vivo conditions. In this study, tetraploid plants belong to the four watermelon lines and diploid plants compared with the morphological and cytological dates. Morphological dates; width of the leaf-length (cm, male flower diameter (mm, diameter-length of the ovary (mm, the female flower petal width and length (mm were measured. Cytological assessment of the stoma diameter (μm, stomatal length (μm, stomatal density and chloroplast number were measured. In the present study has shown that the tetraploid plants grow vigorously as compared to diploid plants. Tetraploid plants are the number of chloroplasts increased, but decreased stomatal density were determined. As a result, tetraploid plants could be selected practically and economically by using morphological and cytological data for watermelon plants.

  18. Studies on the comparability of the results from different methods for the radioimmunological determination of digoxin

    International Nuclear Information System (INIS)

    Dwenger, A.; Trautschold, I.

    1978-01-01

    Three iodine-125-digoxin radioimmunoassay kits (A Amersham Buchler; B Boehringer Mannheim; C Schwarz Mann/Becton Dickinson) were evaluated with respect to assay quality and comparability of the results. Intra- and interassay variances were calculated for the following types of samples: Three media (a pool serum; b artificial human serum; c buffer solution with albumin and globulin) containing pure digoxin, sera from a pharmacokinetic study, sera with different concentrations of proteins, a hemolytic serum and sera with digitoxin and metabolites of spironolactone. The intra-assay precision depended on the medium of the sample and was higher for samples with identical digoxin concentrations in an identical medium (e.g. CV for 2 μg/l in medium a for kit A: 4.3% for kit B: 7.0%; for kit C: 2.2%) than for samples with identical antigen concentrations in different media (CV for 2 μg/l in media a, b and c for kit A: 6.4%; for kit B: 9.1%; for kit C: 4.3%). The mean recovery in the range 0.5-4 μg/l depended on the kind of medium (a, b or c) and varied for kit A from 84.4% to 100.8%, for kit B from 112.0% to 119.6%, and for kit C from 98.0% to 104.5%. Decreasing serum protein concentrations to less than one half of the physiological concentration gave false negative results for kit A and fals positive results for kit C; for kit B this dependency was not be observed, but there was a decrease of reproducibility. (orig./AJ) [de

  19. Inter-comparison of different direct and indirect methods to determine radon flux from soil

    International Nuclear Information System (INIS)

    Grossi, C.; Vargas, A.; Camacho, A.; Lopez-Coto, I.; Bolivar, J.P.; Xia Yu; Conen, F.

    2011-01-01

    The physical and chemical characteristics of radon gas make it a good tracer for use in the application of atmospheric transport models. For this purpose the radon source needs to be known on a global scale and this is difficult to achieve by only direct experimental methods. However, indirect methods can provide radon flux maps on larger scales, but their reliability has to be carefully checked. It is the aim of this work to compare radon flux values obtained by direct and indirect methods in a measurement campaign performed in the summer of 2008. Different systems to directly measure radon flux from the soil surface and to measure the related parameters terrestrial γ dose and 226 Ra activity in soil, for indirect estimation of radon flux, were tested. Four eastern Spanish sites with different geological and soil characteristics were selected: Teruel, Los Pedrones, Quintanar de la Orden and Madrid. The study shows the usefulness of both direct and indirect methods for obtaining radon flux data. Direct radon flux measurements by continuous and integrated monitors showed a coefficient of variation between 10% and 23%. At the same time, indirect methods based on correlations between 222 Rn and terrestrial γ dose rate, or 226 Ra activity in soil, provided results similar to the direct measurements, when these proxies were directly measured at the site. Larger discrepancies were found when proxy values were extracted from existing data bases. The participating members involved in the campaign study were the Institute of Energy Technology (INTE) of the Technical University of Catalonia (UPC), Huelva University (UHU), and Basel University (BASEL).

  20. Determination of crop residues and the physical and mechanical properties of soil in different tillage systems

    Directory of Open Access Journals (Sweden)

    P Ahmadi Moghaddam

    2016-04-01

    Full Text Available Introduction: Monitoring and management of soil quality is crucial for sustaining soil function in ecosystem. Tillage is one of the management operations that drastically affect soil physical quality. Conservation tillage methods are one of the efficient solutions in agriculture to reduce the soil erosion, air pollution, energy consumption, and the costs, if there is a proper management on the crop residues. One of the serious problems in agriculture is soil erosion which is rapidly increased in the recent decades as the intensity of tillage increases. This phenomenon occurs more in sloping lands or in the fields which are lacking from crop residues and organic materials. The conservation tillage has an important role in minimizing soil erosion and developing the quality of soil. Hence, it has attracted the attention of more researchers and farmers in the recent years. Materials and Methods: In this study, the effect of different tillage methods has been investigated on the crop residues, mechanical resistance of soil, and the stability of aggregates. This research was performed on the agricultural fields of Urmia University, located in Nazloo zone in 2012. Wheat and barley were planted in these fields, consecutively. The soil texture of these fields was loamy clay and the factorial experiments were done in a completely randomized block design. In this study, effect of three tillage systems including tillage with moldboard (conventional tillage, tillage with disk plow (reduced tillage, chisel plow (minimum tillage and control treatment on some soil physical properties was investigated. Depth is second factor that was investigated in three levels including 0-60, 60-140, and 140-200 mm. Moreover, the effect of different percentages of crop residues on the rolling resistance of non-driving wheels was studied in a soil bin. The contents of crop residues have been measured by using the linear transects and image processing methods. In the linear

  1. Gender differences in incidence and determinants of disability in activities of daily living among elderly individuals: SABE study.

    Science.gov (United States)

    Alexandre, Tiago da Silva; Corona, Ligiana Pires; Nunes, Daniella Pires; Santos, Jair Lício Ferreira; Duarte, Yeda Aparecida de Oliveira; Lebrão, Maria Lúcia

    2012-01-01

    Determining the groups that are most susceptible to developing disability is essential to establishing effective prevention and rehabilitation strategies. The aim of the present study was to determine gender differences in the incidence of disability regarding activities of daily living (ADL) and determinants among elderly residents of Sao Paulo, Brazil. In 2000, 1634 elderly with no difficulties regarding ADL (modified Katz Index) were selected. These activities were reassessed in 2006 and disability was the outcome for the analysis of determinants. The following characteristics were analyzed at baseline: socio-demographic, behavioral, health status, medications, falls, hospitalizations, depressive symptoms, cognition, handgrip, mobility and balance. The incidence density was 42.4/1000 women/year and 17.5/1000 men/year. After adjusting for socioeconomic status and health conditions, women with chronic diseases and social vulnerability continued to have a greater incidence of disability. The following were determinants of the incidence of disability: age and depressive symptoms in both genders; stroke and slowness on the sit-and-stand test among men; and osteoarthritis and sedentary lifestyle among women. Better cognitive performance and handgrip strength were protective factors among men and women, respectively. Adverse clinical and social conditions determine differences between genders regarding the incidence of disability. Decreased mobility and balance and health conditions that affect the central nervous system or lead to impaired cognition disable men more, whereas a sedentary lifestyle, reduction in muscle strength and conditions that affect the osteoarticular system disable women more. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

  2. THE MEMORY SYSTEM ENGAGED DURING ACQUISITION DETERMINES THE EFFECTIVENESS OF DIFFERENT EXTINCTION PROTOCOLS

    Directory of Open Access Journals (Sweden)

    Jarid eGoodman

    2015-11-01

    Full Text Available Previous research indicates that extinction of rodent maze behavior may occur without explicit performance of the previously required response. In latent extinction, confining an animal to a previously rewarded goal location without reinforcement is typically sufficient to produce extinction of maze learning. However, previous studies have not determined whether latent extinction may be successfully employed to extinguish all types of memory acquired in the maze, or whether only specific types of memory may be vulnerable to latent extinction. The present study examined whether latent extinction may be effective across two plus-maze tasks that depend on anatomically distinct neural systems. Adult male Long-Evans rats were trained in a hippocampus-dependent place learning task (experiment 1, in which animals were trained to approach a consistent spatial location for food reward. A separate group of rats were trained in a dorsolateral striatum-dependent response learning task (experiment 2, in which animals were trained to make a consistent egocentric body-turn response for food reward. Following training, animals received response extinction or latent extinction. For response extinction, animals were given the opportunity to execute the original running approach response toward the empty food cup. For latent extinction, animals were confined to the original goal locations with the empty food cup, thus preventing them from making the original running approach response. Results indicate that, relative to no extinction, latent extinction was effective at extinguishing memory in the place learning task, but remained ineffective in the response learning task. In contrast, typical response extinction remained very effective at extinguishing memory in both place and response learning tasks. The present findings confirm that extinction of maze learning may occur with or without overt performance of the previously acquired response, but that the

  3. Attitudes towards Immigrant Workers and Asylum Seekers in Eastern Croatia: Dimensions, Determinants and Differences

    Directory of Open Access Journals (Sweden)

    Margareta Gregurović

    2016-04-01

    values and expressing greater interest in politics. Differences in prediction of dependent variables indicated that more liberal and better educated respondents had more positive attitudes towards immigrant workers, while Serbs (in comparison to Croats and respondents rejecting anti-EU orientations had a more positive perception of asylum seekers. The results were compared to other relevant research, including the discussion of observed differences and similarities, and recommendations for further research.

  4. Determination of lamivudine and zidovudine permeability using a different ex vivo method in Franz cells.

    Science.gov (United States)

    Dezani, André Bersani; Pereira, Thaisa Marinho; Caffaro, Arthur Massabki; Reis, Juliana Mazza; Serra, Cristina Helena Dos Reis

    2013-01-01

    The major processes that control the absorption of orally administered drugs are dissolution and gastrointestinal permeation. These processes depend on two main properties: solubility and permeability. Based on these characteristics, the Biopharmaceutical Classification System (BCS) was proposed as a tool to assist in biowaiver and bioavailability prediction of drugs. The purpose of the present study was to evaluate the permeability of lamivudine (3TC) and zidovudine (AZT) using a different ex vivo method in Franz cells. A segment of jejunum was inserted in a Franz cells apparatus, in order to assess drug permeability in the apical-basolateral (A-B) and basolateral-apical (B-A) directions. Each drug was added to the donor chamber, collected from the acceptor chamber and analyzed by HPLC. Fluorescein (FLU) and metoprolol (METO) were used as low and high permeability markers, respectively. The apparent permeability (Papp) results for the A-B direction were: Papp FLU A-B=0.54×10(-4)cm·s(-1), Papp METO A-B=7.99×10(-4)cm·s(-1), Papp 3TC A-B=4.58×10(-4)cm·s(-1) and Papp AZT A-B=5.34×10(-4)cm·s(-1). For the B-A direction, the Papp results were: Papp FLU B-A=0.56×10(-4)cm·s(-1), Papp METO B-A=0.25×10(-4)cm·s(-1), Papp 3TC B-A=0.24×10(-4)cm·s(-1) and Papp AZT B-A=0.19×10(-4)cm·s(-1). For the A-B direction, the Papp results of fluorescein and metoprolol show low and high permeability, respectively, indicating that the membranes were appropriate for permeability studies. For the A-B direction, the Papp results of 3TC and AZT suggest that these antiretroviral drugs have permeability values close to metoprolol. Nevertheless, for the B-A direction the Papp results do not suggest efflux mechanism for any of the drugs. Thereby, the different ex vivo methods using Franz cells can be successfully applied in drug permeability studies, in particular for drug biopharmaceutical classification. Copyright © 2013 Elsevier Inc. All rights reserved.

  5. Determination of ruthenium in photographic emulsions - Development and comparison of different sample treatments and mass spectrometric methods

    NARCIS (Netherlands)

    Krystek, Petra; Heumann, Klaus G.

    1999-01-01

    Different sample treatment procedures were combined with inductively coupled plasma mass spectrometry (ICP-MS) and negative thermal ionisation mass spectrometry (NTI-MS) for the determination of ruthenium traces in photographic emulsions. Dissolution of the samples in concentrated ammonia solution

  6. Sea surface height determination in the arctic ocean from Cryosat2 SAR data, the impact of using different empirical retrackers

    DEFF Research Database (Denmark)

    Jain, Maulik; Andersen, Ole Baltazar; Stenseng, Lars

    2012-01-01

    Cryosat2 Level 1B SAR data can be processed using different empirical retrackers to determine the sea surface height and its variations in the Arctic Ocean. Two improved retrackers based on the combination of OCOG (Offset Centre of Gravity), Threshold methods and Leading Edge Retrieval is used...

  7. Experimental determinations of soil copper toxicity to lettuce (Lactuca sativa) growth in highly different copper spiked and aged soils

    DEFF Research Database (Denmark)

    Christiansen, Karen Søgaard; Borggaard, Ole K.; Holm, Peter Engelund

    2015-01-01

    Accurate knowledge about factors and conditions determining copper (Cu) toxicity in soil is needed for predicting plant growth in various Cu-contaminated soils. Therefore, effects of Cu on growth (biomass production) of lettuce (Lactuca sativa) were tested on seven selected, very different soils...

  8. Socioeconomic status as determinant for participation in mammography screening: assessing the difference between using women's own versus their partner's

    DEFF Research Database (Denmark)

    Kjellén, Malin; von Euler-Chelpin, My

    2010-01-01

    Earlier research has shown that participation in mammography screening tends to vary across socioeconomic levels. We assessed the difference between using the woman's own socioeconomic status (SES) and using that of her household or partner as determinant of participation in mammography screening....

  9. How Angular Velocity Features and Different Gyroscope Noise Types Interact and Determine Orientation Estimation Accuracy

    Science.gov (United States)

    Pasciuto, Ilaria; Ligorio, Gabriele; Bergamini, Elena; Vannozzi, Giuseppe; Sabatini, Angelo Maria; Cappozzo, Aurelio

    2015-01-01

    In human movement analysis, 3D body segment orientation can be obtained through the numerical integration of gyroscope signals. These signals, however, are affected by errors that, for the case of micro-electro-mechanical systems, are mainly due to: constant bias, scale factor, white noise, and bias instability. The aim of this study is to assess how the orientation estimation accuracy is affected by each of these disturbances, and whether it is influenced by the angular velocity magnitude and 3D distribution across the gyroscope axes. Reference angular velocity signals, either constant or representative of human walking, were corrupted with each of the four noise types within a simulation framework. The magnitude of the angular velocity affected the error in the orientation estimation due to each noise type, except for the white noise. Additionally, the error caused by the constant bias was also influenced by the angular velocity 3D distribution. As the orientation error depends not only on the noise itself but also on the signal it is applied to, different sensor placements could enhance or mitigate the error due to each disturbance, and special attention must be paid in providing and interpreting measures of accuracy for orientation estimation algorithms. PMID:26393606

  10. Experimental Determination of Frost Resistance of Autoclaved Aerated Concrete at Different Levels of Moisture Saturation

    Science.gov (United States)

    Kočí, Václav; Maděra, Jiří; Jerman, Miloš; Černý, Robert

    2018-06-01

    The ability of porous building materials to stand up to moisture phase changes induced by alternating environment is described mostly by means of their frost resistance. However, the test conditions defined by relevant standards might not capture the real situation on building site in various locations. In particular, the prescribed full water saturation of analyzed specimens during the whole time of a freeze/thaw experiment presents an ultimate case only but certainly not an everyday reality. Even the materials of surface layers are mostly exposed to such severe conditions just for a limited period of time. In this paper, the experimental analysis of frost resistance of three different types of autoclaved aerated concrete (AAC) is performed in an extended way, including not only the standard testing but also the investigation of dry- and partially saturated samples. A complementary computational analysis of an AAC building envelope in Central European climate is presented as well, in order to illustrate the likely hygric conditions in the wall. Experimental results show that according to the standard test the loss of compressive strength, as well as the loss of mass after 25 cycles, is acceptable for all studied samples but after 50 cycles only the material with the compressive strength of 4 MPa performs satisfactorily. On the other hand, the tests with initially dried or partially saturated samples indicate a good frost resistance of all studied materials for both 25 and 50 cycles.

  11. Measurement system study using beta radiation for determining different paper superficial density

    International Nuclear Information System (INIS)

    Vieira, Thais Molina; Madi Filho, Tufic

    2000-01-01

    Radioisotopes are used now in some areas of the industry. For quality control purposes, they are used in non-destructive analysis (NDA) which is applied to the materials examination verifying if they are adequate to the patterns demanded by technical rules or the market. Gamma, beta or neutron radiation sources may be used to do NDA, depending on material to be analyzed and the industrial process. In this work, the study of measurement system applied to quality control area was conceived and, in the evaluation of the material in test, a radioactive beta source was used. A system was designed and mounted, using a plastic scintillator detector developed in the laboratories of the Centro de Tecnologia das Radiacoes from IPEN-CNEN/SP. Two beta sources were used in the operational test: 90 Sr/ 90 Y and 204 Tl. Measures were obtained using several paper samples with different superficial density in g/m 2 . With the results, an equation correlating the relative activity with the superficial density in g/m 2 was established. (author)

  12. How do family physicians communicate about cardiovascular risk? Frequencies and determinants of different communication formats.

    Science.gov (United States)

    Neuner-Jehle, Stefan; Senn, Oliver; Wegwarth, Odette; Rosemann, Thomas; Steurer, Johann

    2011-04-05

    Patients understand information about risk better if it is communicated in numerical or visual formats (e.g. graphs) compared to verbal qualifiers only. How frequently different communication formats are used in clinical primary care settings is unknown. We collected socioeconomic and patient understanding data using questionnaires and audio-recorded consultations about cardiovascular disease risk. The frequencies of the communication formats were calculated and multivariate regression analysis of associations between communication formats, patient and general practitioner characteristics, and patient subjective understanding was performed. In 73% of 70 consultations, verbal qualifiers were used exclusively to communicate cardiovascular risk, compared to numerical (11%) and visual (16%) formats. Female GPs and female patient's gender were significantly associated with a higher use of verbal formats compared to visual formats (p=0.001 and p=0.039, respectively). Patient subjective understanding was significantly higher in visual counseling compared to verbal counseling (p=0.001). Verbal qualifiers are the most often used communication format, though recommendations favor numerical and visual formats, with visual formats resulting in better understanding than others. Also, gender is associated with the choice of communication format. Barriers against numerical and visual communication formats among GPs and patients should be studied, including gender aspects. Adequate risk communication should be integrated into physicians' education.

  13. How do family physicians communicate about cardiovascular risk? Frequencies and determinants of different communication formats

    Directory of Open Access Journals (Sweden)

    Rosemann Thomas

    2011-04-01

    Full Text Available Abstract Background Patients understand information about risk better if it is communicated in numerical or visual formats (e.g. graphs compared to verbal qualifiers only. How frequently different communication formats are used in clinical primary care settings is unknown. Methods We collected socioeconomic and patient understanding data using questionnaires and audio-recorded consultations about cardiovascular disease risk. The frequencies of the communication formats were calculated and multivariate regression analysis of associations between communication formats, patient and general practitioner characteristics, and patient subjective understanding was performed. Results In 73% of 70 consultations, verbal qualifiers were used exclusively to communicate cardiovascular risk, compared to numerical (11% and visual (16% formats. Female GPs and female patient's gender were significantly associated with a higher use of verbal formats compared to visual formats (p = 0.001 and p = 0.039, respectively. Patient subjective understanding was significantly higher in visual counseling compared to verbal counseling (p = 0.001. Conclusions Verbal qualifiers are the most often used communication format, though recommendations favor numerical and visual formats, with visual formats resulting in better understanding than others. Also, gender is associated with the choice of communication format. Barriers against numerical and visual communication formats among GPs and patients should be studied, including gender aspects. Adequate risk communication should be integrated into physicians' education.

  14. Neutron spectrometry and determination of neutron ambient dose equivalents in different LINAC radiotherapy rooms

    International Nuclear Information System (INIS)

    Domingo, C.; Garcia-Fuste, M.J.; Morales, E.; Amgarou, K.; Terron, J.A.; Rosello, J.; Brualla, L.; Nunez, L.; Colmenares, R.; Gomez, F.; Hartmann, G.H.; Sanchez-Doblado, F.; Fernandez, F.

    2010-01-01

    A project has been set up to study the effect on a radiotherapy patient of the neutrons produced around the LINAC accelerator head by photonuclear reactions induced by photons above ∼8 MeV. These neutrons may reach directly the patient, or they may interact with the surrounding materials until they become thermalised, scattering all over the treatment room and affecting the patient as well, contributing to peripheral dose. Spectrometry was performed with a calibrated and validated set of Bonner spheres at a point located at 50 cm from the isocenter, as well as at the place where a digital device for measuring neutrons, based on the upset of SRAM memories induced by thermal neutrons, is located inside the treatment room. Exposures have taken place in six LINAC accelerators with different energies (from 15 to 23 MV) with the aim of relating the spectrometer measurements with the readings of the digital device under various exposure and room geometry conditions. The final purpose of the project is to be able to relate, under any given treatment condition and room geometry, the readings of this digital device to patient neutron effective dose and peripheral dose in organs of interest. This would allow inferring the probability of developing second malignancies as a consequence of the treatment. Results indicate that unit neutron fluence spectra at 50 cm from the isocenter do not depend on accelerator characteristics, while spectra at the place of the digital device are strongly influenced by the treatment room geometry.

  15. (C-V) and y-parameters determination of JFETs under different environmental conditions

    Energy Technology Data Exchange (ETDEWEB)

    El-Ghanam, S.M., E-mail: safaaghanam@yahoo.co [Women' s College for Art, Science and Education, Ain-Shams University, Heliopolis, Cairo (Egypt)

    2010-10-01

    The C-V characteristics of n-channel JFET have been measured under different environmental conditions of temperature up to 140 deg. C and {gamma}-rays up to 100 kGy. For low bias voltage and frequency, the input capacitance, C{sub iss}, is shown to be a direct function of temperature. On the other hand, its value was shown to decrease from 11.68 down to 8.17 nF due to {gamma}-exposure up to 100 kGy. The y-parameters of common source amplifier were calculated under the influence of temperature and {gamma}-rays. The results show that the susceptance component of the admittance increases due to increase in temperature, while decreasing after {gamma}-exposure. Considering the cutoff frequency f{sub T0}, it is clear that as the temperature increases from 30 up to 140 deg. C, f{sub T0} dropped from 47 MHz down to 5 MHz, measured at 0.8 V. On the other hand its value was shown to increase from 43 MHz up to 102 MHz, measured at the same bias voltage, due to {gamma}-exposure up to 100 kGy.

  16. Determining the adsorption and desorption behavior of thiabendazole fungicide for five different agricultural soils

    Directory of Open Access Journals (Sweden)

    Taghazal Zahra

    2017-05-01

    Full Text Available Thiabendazole 2-(4'-thiazolylbenzimidazole (TBZ is a Benzimidazole fungicide. In the present study adsorption and desorption of TBZ was investigated through batch equilibrium method involving UV-Visible spectrophotometer and High-performance liquid chromatography. Linear and Freundlich coefficients and kinetics of TBZ was studied in different agricultural soils of Pakistan. 9.8µgml-1 and 12.09µgml-1 were highest values of Kd ads and Kd des respectively. Kf ads values ranged from 6.6 to 8µgml-1 whereas values of Kf des followed the range of 1.5µgml-1 to 9.8µgml-1. Most of the samples depict negative hysteresis as their 1/ndes was more than 1/nads. Gibbs or free energy change (∆G and hysteresis vividly proved physical and reversible adsorption process. The values of K om and Koc were indicated medium mobility group of TBZ in selected soils. However all kinetic values varied significantly from sample to sample depending on their physicochemical parameters.

  17. Experimental determination of the energy difference between competing isomers of deposited, size-selected gold nanoclusters.

    Science.gov (United States)

    Foster, D M; Ferrando, R; Palmer, R E

    2018-04-03

    The equilibrium structures and dynamics of a nanoscale system are regulated by a complex potential energy surface (PES). This is a key target of theoretical calculations but experimentally elusive. We report the measurement of a key PES parameter for a model nanosystem: size-selected Au nanoclusters, soft-landed on amorphous silicon nitride supports. We obtain the energy difference between the most abundant structural isomers of magic number Au 561 clusters, the decahedron and face-centred-cubic (fcc) structures, from the equilibrium proportions of the isomers. These are measured by atomic-resolution scanning transmission electron microscopy, with an ultra-stable heating stage, as a function of temperature (125-500 °C). At lower temperatures (20-125 °C) the behaviour is kinetic, exhibiting down conversion of metastable decahedra into fcc structures; the higher state is repopulated at higher temperatures in equilibrium. We find the decahedron is 0.040 ± 0.020 eV higher in energy than the fcc isomer, providing a benchmark for the theoretical treatment of nanoparticles.

  18. How Angular Velocity Features and Different Gyroscope Noise Types Interact and Determine Orientation Estimation Accuracy.

    Science.gov (United States)

    Pasciuto, Ilaria; Ligorio, Gabriele; Bergamini, Elena; Vannozzi, Giuseppe; Sabatini, Angelo Maria; Cappozzo, Aurelio

    2015-09-18

    In human movement analysis, 3D body segment orientation can be obtained through the numerical integration of gyroscope signals. These signals, however, are affected by errors that, for the case of micro-electro-mechanical systems, are mainly due to: constant bias, scale factor, white noise, and bias instability. The aim of this study is to assess how the orientation estimation accuracy is affected by each of these disturbances, and whether it is influenced by the angular velocity magnitude and 3D distribution across the gyroscope axes. Reference angular velocity signals, either constant or representative of human walking, were corrupted with each of the four noise types within a simulation framework. The magnitude of the angular velocity affected the error in the orientation estimation due to each noise type, except for the white noise. Additionally, the error caused by the constant bias was also influenced by the angular velocity 3D distribution. As the orientation error depends not only on the noise itself but also on the signal it is applied to, different sensor placements could enhance or mitigate the error due to each disturbance, and special attention must be paid in providing and interpreting measures of accuracy for orientation estimation algorithms.

  19. How Angular Velocity Features and Different Gyroscope Noise Types Interact and Determine Orientation Estimation Accuracy

    Directory of Open Access Journals (Sweden)

    Ilaria Pasciuto

    2015-09-01

    Full Text Available In human movement analysis, 3D body segment orientation can be obtained through the numerical integration of gyroscope signals. These signals, however, are affected by errors that, for the case of micro-electro-mechanical systems, are mainly due to: constant bias, scale factor, white noise, and bias instability. The aim of this study is to assess how the orientation estimation accuracy is affected by each of these disturbances, and whether it is influenced by the angular velocity magnitude and 3D distribution across the gyroscope axes. Reference angular velocity signals, either constant or representative of human walking, were corrupted with each of the four noise types within a simulation framework. The magnitude of the angular velocity affected the error in the orientation estimation due to each noise type, except for the white noise. Additionally, the error caused by the constant bias was also influenced by the angular velocity 3D distribution. As the orientation error depends not only on the noise itself but also on the signal it is applied to, different sensor placements could enhance or mitigate the error due to each disturbance, and special attention must be paid in providing and interpreting measures of accuracy for orientation estimation algorithms.

  20. Multinomial Response Models, for Modeling and Determining Important Factors in Different Contraceptive Methods in Women

    Directory of Open Access Journals (Sweden)

    E Haji Nejad

    2001-06-01

    Full Text Available Difference aspects of multinomial statistical modelings and its classifications has been studied so far. In these type of problems Y is the qualitative random variable with T possible states which are considered as classifications. The goal is prediction of Y based on a random Vector X ? IR^m. Many methods for analyzing these problems were considered. One of the modern and general method of classification is Classification and Regression Trees (CART. Another method is recursive partitioning techniques which has a strange relationship with nonparametric regression. Classical discriminant analysis is a standard method for analyzing these type of data. Flexible discriminant analysis method which is a combination of nonparametric regression and discriminant analysis and classification using spline that includes least square regression and additive cubic splines. Neural network is an advanced statistical method for analyzing these types of data. In this paper properties of multinomial logistics regression were investigated and this method was used for modeling effective factors in selecting contraceptive methods in Ghom province for married women age 15-49. The response variable has a tetranomial distibution. The levels of this variable are: nothing, pills, traditional and a collection of other contraceptive methods. A collection of significant independent variables were: place, age of women, education, history of pregnancy and family size. Menstruation age and age at marriage were not statistically significant.

  1. Predation determines different selective pressure on pea aphid host races in a complex agricultural mosaic.

    Directory of Open Access Journals (Sweden)

    Adalbert Balog

    Full Text Available Field assessments were conducted to examine the interplay between host plant and predation in complex agricultural mosaic on pea aphid clover and alfalfa races. In one experiment, we examined the relative fitness on clover race (CR and alfalfa race (AR pea aphids on broad bean, red clover and alfalfa alone. But because clover is typically grown in a more complex agricultural mosaic with alfalfa and broad bean, a second experiment was conducted to assess the fitness consequences under predation in a more complex agricultural field setting that also included potential apparent competition with AR pea aphids. In a third experiment we tested for the effect of differential host race density on the fitness of the other host race mediated by a predator effect. CR pea aphids always had fitness losses when on broad bean (had lower fitness on broad bean relative to red clover and fitness benefits when on red clover (higher fitness on red clover relative to broad bean, whether or not in apparent competition with alfalfa race aphids on bean and alfalfa. AR suffered fitness loss on both alfalfa and bean in apparent competition with CR on clover. Therefore we can conclude that the predation rate between host races was highly asymmetrical. The complexity of the agricultural mosaic thus can influence prey selection by predators on different host plants. These may have evolutionary consequences through context dependent fitness benefits on particular host plants.

  2. A validated fast difference spectrophotometric method for 5-hydroxymethyl-2-furfural (HMF) determination in corn syrups.

    Science.gov (United States)

    de Andrade, Jucimara Kulek; de Andrade, Camila Kulek; Komatsu, Emy; Perreault, Hélène; Torres, Yohandra Reyes; da Rosa, Marcos Roberto; Felsner, Maria Lurdes

    2017-08-01

    Corn syrups, important ingredients used in food and beverage industries, often contain high levels of 5-hydroxymethyl-2-furfural (HMF), a toxic contaminant. In this work, an in house validation of a difference spectrophotometric method for HMF analysis in corn syrups was developed using sophisticated statistical tools by the first time. The methodology showed excellent analytical performance with good selectivity, linearity (R 2 =99.9%, r>0.99), accuracy and low limits (LOD=0.10mgL -1 and LOQ=0.34mgL -1 ). An excellent precision was confirmed by repeatability (RSD (%)=0.30) and intermediate precision (RSD (%)=0.36) estimates and by Horrat value (0.07). A detailed study of method precision using a nested design demonstrated that variation sources such as instruments, operators and time did not interfere in the variability of results within laboratory and consequently in its intermediate precision. The developed method is environmentally friendly, fast, cheap and easy to implement resulting in an attractive alternative for corn syrups quality control in industries and official laboratories. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Determining the precipitable water vapor thresholds under different rainfall strengths in Taiwan

    Science.gov (United States)

    Yeh, Ta-Kang; Shih, Hsuan-Chang; Wang, Chuan-Sheng; Choy, Suelynn; Chen, Chieh-Hung; Hong, Jing-Shan

    2018-02-01

    Precipitable Water Vapor (PWV) plays an important role for weather forecasting. It is helpful in evaluating the changes of the weather system via observing the distribution of water vapor. The ability of calculating PWV from Global Positioning System (GPS) signals is useful to understand the special weather phenomenon. In this study, 95 ground-based GPS and rainfall stations in Taiwan were utilized from 2006 to 2012 to analyze the relationship between PWV and rainfall. The PWV data were classified into four classes (no, light, moderate and heavy rainfall), and the vertical gradients of the PWV were obtained and the variations of the PWV were analyzed. The results indicated that as the GPS elevation increased every 100 m, the PWV values decreased by 9.5 mm, 11.0 mm, 12.2 mm and 12.3 mm during the no, light, moderate and heavy rainfall conditions, respectively. After applying correction using the vertical gradients mentioned above, the average PWV thresholds were 41.8 mm, 52.9 mm, 62.5 mm and 64.4 mm under the no, light, moderate and heavy rainfall conditions, respectively. This study offers another type of empirical threshold to assist the rainfall prediction and can be used to distinguish the rainfall features between different areas in Taiwan.

  4. How genes and environmental factors determine the different neurodevelopmental trajectories of schizophrenia and bipolar disorder.

    Science.gov (United States)

    Demjaha, Arsime; MacCabe, James H; Murray, Robin M

    2012-03-01

    The debate endures as to whether schizophrenia and bipolar disorder are separate entities or different manifestations of a single underlying pathological process. Here, we argue that this sterile argument obscures the fact that the truth lies somewhere in between. Thus, recent studies support a model whereby, on a background of some shared genetic liability for both disorders, patients with schizophrenia have been subject to additional genetic and/or environmental factors that impair neurodevelopment; for example, copy number variants and obstetric complications are associated with schizophrenia but not with bipolar disorder. As a result, children destined to develop schizophrenia show an excess of neuromotor delays and cognitive difficulties while those who later develop bipolar disorder perform at least as well as the general population. In keeping with this model, cognitive impairments and brain structural abnormalities are present at first onset of schizophrenia but not in the early stages of bipolar disorder. However, with repeated episodes of illness, cognitive and brain structural abnormalities accumulate in both schizophrenia and bipolar disorder, thus clouding the picture.

  5. Stand competition determines how different tree species will cope with a warming climate.

    Directory of Open Access Journals (Sweden)

    Laura Fernández-de-Uña

    Full Text Available Plant-plant interactions influence how forests cope with climate and contribute to modulate species response to future climate scenarios. We analysed the functional relationships between growth, climate and competition for Pinus sylvestris, Quercus pyrenaica and Quercus faginea to investigate how stand competition modifies forest sensitivity to climate and simulated how annual growth rates of these species with different drought tolerance would change throughout the 21st century. Dendroecological data from stands subjected to thinning were modelled using a novel multiplicative nonlinear approach to overcome biases related to the general assumption of a linear relationship between covariates and to better mimic the biological relationships involved. Growth always decreased exponentially with increasing competition, which explained more growth variability than climate in Q. faginea and P. sylvestris. The effect of precipitation was asymptotic in all cases, while the relationship between growth and temperature reached an optimum after which growth declined with warmer temperatures. Our growth projections indicate that the less drought-tolerant P. sylvestris would be more negatively affected by climate change than the studied sub-Mediterranean oaks. Q. faginea and P. sylvestris mean growth would decrease under all the climate change scenarios assessed. However, P. sylvestris growth would decline regardless of the competition level, whereas this decrease would be offset by reduced competition in Q. faginea. Conversely, Q. pyrenaica growth would remain similar to current rates, except for the warmest scenario. Our models shed light on the nature of the species-specific interaction between climate and competition and yield important implications for management. Assuming that individual growth is directly related to tree performance, trees under low competition would better withstand the warmer conditions predicted under climate change scenarios but in

  6. Variation of Annual ET Determined from Water Budgets Across Rural Southeastern Basins Differing in Forest Types

    Science.gov (United States)

    Younger, S. E.; Jackson, C. R.

    2017-12-01

    In the Southeastern United States, evapotranspiration (ET) typically accounts for 60-70% of precipitation. Watershed and plot scale experiments show that evergreen forests have higher ET rates than hardwood forests and pastures. However, some plot experiments indicate that certain hardwood species have higher ET than paired evergreens. The complexity of factors influencing ET in mixed land cover watersheds makes identifying the relative influences difficult. Previous watershed scale studies have relied on regression to understand the influences or low flow analysis to indicate growing season differences among watersheds. Existing studies in the southeast investigating ET rates for watersheds with multiple forest cover types have failed to identify a significant forest type effect, but these studies acknowledge small sample sizes. Trends of decreasing streamflow have been recognized in the region and are generally attributed to five key factors, 1.) influences from multiple droughts, 2.) changes in distribution of precipitation, 3.) reforestation of agricultural land, 4.) increasing consumptive uses, or 5.) a combination of these and other factors. This study attempts to address the influence of forest type on long term average annual streamflow and on stream low flows. Long term annual ET rates were calculated as ET = P-Q for 46 USGS gaged basins with daily data for the 1982 - 2014 water years, >40% forest cover, and no large reservoirs. Land cover data was regressed against ET to describe the relationship between each of the forest types in the National Land Cover Database. Regression analysis indicates evergreen land cover has a positive relationship with ET while deciduous and total forest have a negative relationship with ET. Low flow analysis indicates low flows tend to be lower in watersheds with more evergreen cover, and that low flows increase with increasing deciduous cover, although these relationships are noisy. This work suggests considering forest

  7. Determination of reaction rate constants for alkylation of 4-(p-nitrobenzyl) pyridine by different alkylating agents.

    Science.gov (United States)

    Walles, S A

    1980-02-01

    The rate constants have been determined for the reaction between some different alkylating agents and 4-(p-nitrobenzyl) pyridine (NBP) in methanol. These constants have been compared with those for alkylation of aniline in water. All the constants were lower in methanol than in water but in different degrees. The rate constants of the different alkylating agents have been calculated at a nucleophilic strength n=2. The genetic risk defined as the degree of alkylation of a nucleophile (n=2) is equivalent to the rate constant kn=2 and the target dose. The dependence of the genetic risk on the rate constant (kn=2) is discussed.

  8. On the Measurement of Morphine Level and Determination of Consumption of Different Drugs in People’s Urine at Different Ages through High-Performance Liquid Chromatography

    Directory of Open Access Journals (Sweden)

    saeed shahabi

    2015-06-01

    Full Text Available Objective: Morphine is one of the important narcotics which constitutes one of the alkaloid and opium components. If this substance is prepared defectively, it will appear in a variety of colors. Therefore, it is not possible to identify this substance by its color. Method: In this study, drug addicts were invited to take urine tests. After morphine extraction from urine samples by chromium toxicity method, different standard concentrations were injected into HPLC device and the resultant diagrams were analyzed. Then, some changes were made into the methodology for the optimality of measurement process and morphine determination in human urine. Results: It was found that the amount of morphine available in the urine samples was measureable through high-performance liquid chromatography and the amount of impurities added to drugs could be determined. Conclusion: This method can be used for diagnosis.

  9. Different slopes of a mountain can determine the structure of ferns and lycophytes communities in a tropical forest of Brazil

    Directory of Open Access Journals (Sweden)

    FELIPE C. NETTESHEIM

    2014-03-01

    Full Text Available A community of Ferns and Lycophytes was investigated by comparing the occurrence of species on different slopes of a paleoisland in Southeastern Brazil. Our goal was to evaluate the hypothesis that slopes with different geographic orientations determine a differentiation of Atlantic Forest ferns and lycophytes community. We recorded these plants at slopes turned towards the continent and at slopes turned towards the open sea. Analysis consisted of a preliminary assessment on fern beta diversity, a Non Metric Multidimensional Scaling (NMDS and a Student t-test to confirm if sites sampling units ordination was different at each axis. We further used the Pearson coefficient to relate fern species to the differentiation pattern and again Student's t-test to determine if richness, plant cover and abundance varied between the two sites. There was a relatively low number of shared species between the two sites and ferns and lycophytes community variation was confirmed. Some species were detected as indicators of the community variation but we were unable to detect richness, plant cover or abundance differences. Despite the evidence of this variation between the slopes, further works are needed to evaluate which processes are contributing to determine this pattern.

  10. What explains the socioeconomic status gap in activity? Educational differences in determinants of physical activity and screentime

    Directory of Open Access Journals (Sweden)

    Nelli Hankonen

    2017-02-01

    Full Text Available Abstract Background Designing evidence-based interventions to address socioeconomic disparities in health and health behaviours requires a better understanding of the specific explanatory mechanisms. We aimed to investigate a comprehensive range of potential theoretical mediators of physical activity (PA and screen time in different socioeconomic status (SES groups: a high SES group of high school students, and a low SES group of vocational school students. The COM-B system, including the Theoretical Domains Framework (TDF, was used as a heuristic framework to synthesise different theoretical determinants in this exploratory study. Methods Finnish vocational and high school students (N = 659 aged 16–19, responded to a survey assessing psychological, social and environmental determinants of activity (PA and screen time. These determinants are mappable into the COM-B domains: capability, opportunity and motivation. The outcome measures were validated self-report measures for PA and screen time. The statistical analyses included a bootstrapping-based mediation procedure. Results Regarding PA, there were SES differences in all of the COM-B domains. For example, vocational school students reported using less self-monitoring of PA, weaker injunctive norms to engage in regular PA, and fewer intentions than high school students. Mediation analyses identified potential mediators of the SES-PA relationship in all of three domains: The most important candidates included self-monitoring (CI95 for b: 0.19–0.47, identity (0.04–0.25 and material resources available (0.01–0.16. However, SES was not related to most determinants of screentime, where there were mainly gender differences. Most determinants were similarly related with both behaviours in both SES groups, indicating no major moderation effect of SES on these relationships. Conclusions This study revealed that already in the first years of educational differentiation, levels of key PA

  11. What explains the socioeconomic status gap in activity? Educational differences in determinants of physical activity and screentime.

    Science.gov (United States)

    Hankonen, Nelli; Heino, Matti T J; Kujala, Emilia; Hynynen, Sini-Tuuli; Absetz, Pilvikki; Araújo-Soares, Vera; Borodulin, Katja; Haukkala, Ari

    2017-02-01

    Designing evidence-based interventions to address socioeconomic disparities in health and health behaviours requires a better understanding of the specific explanatory mechanisms. We aimed to investigate a comprehensive range of potential theoretical mediators of physical activity (PA) and screen time in different socioeconomic status (SES) groups: a high SES group of high school students, and a low SES group of vocational school students. The COM-B system, including the Theoretical Domains Framework (TDF), was used as a heuristic framework to synthesise different theoretical determinants in this exploratory study. Finnish vocational and high school students (N = 659) aged 16-19, responded to a survey assessing psychological, social and environmental determinants of activity (PA and screen time). These determinants are mappable into the COM-B domains: capability, opportunity and motivation. The outcome measures were validated self-report measures for PA and screen time. The statistical analyses included a bootstrapping-based mediation procedure. Regarding PA, there were SES differences in all of the COM-B domains. For example, vocational school students reported using less self-monitoring of PA, weaker injunctive norms to engage in regular PA, and fewer intentions than high school students. Mediation analyses identified potential mediators of the SES-PA relationship in all of three domains: The most important candidates included self-monitoring (CI95 for b: 0.19-0.47), identity (0.04-0.25) and material resources available (0.01-0.16). However, SES was not related to most determinants of screentime, where there were mainly gender differences. Most determinants were similarly related with both behaviours in both SES groups, indicating no major moderation effect of SES on these relationships. This study revealed that already in the first years of educational differentiation, levels of key PA determinants differ, contributing to socioeconomic differences in PA. The

  12. Differences in fruit and vegetable intake and their determinants among 11-year-old schoolchildren between 2003 and 2009

    Directory of Open Access Journals (Sweden)

    Fischer Claudia

    2011-12-01

    Full Text Available Abstract Background Fruit and vegetable (FV intake in children in the Netherlands is much lower than recommended. Recurrent appraisal of intake levels is important for detecting changes in intake over time and to inform future interventions and policies. The aim of the present study was to investigate differences in fruit and vegetable intake, and whether these could be explained by differences in potential determinants of FV intake in 11-year-old Dutch schoolchildren, by comparing two school samples assessed in 2003 and 2009. Methods For 1105 children of the Pro Children study in 2003 and 577 children of the Pro Greens study in 2009 complete data on intake and behavioural determinants were available. The self-administered questionnaire included questions on children's ethnicity, usual fruit and vegetable intake, mother's educational level, and important potential determinants of fruit and vegetable intake. Multiple regression analysis was applied to test for differences in intake and determinants between study samples. Mediation analyses were used to investigate whether the potential mediators explained the differences in intake between the two samples. Results In 2009, more children complied with the World Health Organization recommendation of 400 g fruit and vegetables per day (17.0% than in 2003 (11.8%, p = 0.004. Fruit consumption was significantly higher in the sample of 2009 than in the sample of 2003 (difference = 23.8 (95%CI: 8.1; 39.5 grams/day. This difference was mainly explained by a difference in the parental demand regarding their child's intake (23.6%, followed by the child's knowledge of the fruit recommendation (14.2% and parental facilitation of consumption (18.5%. Vegetable intake was lower in the 2009 sample than in the 2003 sample (12.3 (95%CI -21.0; -3.6. This difference could not be explained by the assessed mediators. Conclusions The findings indicate that fruit intake among 11-year-olds improved somewhat between 2003

  13. Characterization of nonstarch polysaccharides content from different edible organs of some vegetables, determined by GC and HPLC: comparative study.

    Science.gov (United States)

    Villanueva-Suárez, M J; Redondo-Cuenca, A; Rodríguez-Sevilla, M D; de las Heras Martínez, M

    2003-09-24

    Content and composition of dietary fiber as nonstarch polysaccharides (NSP) was determined in vegetables belonging to different types of edible organs, using GC and HPLC. Samples analyzed were subterranean organs (radish and leek), leaves (celery, swiss chard, and lettuce), stalks (celery, swiss chard, and asparagus), inflorescence (broccoli), and fruits (tomato, green pepper, and marrow). The results indicate that though the monomeric profile is similar in all these samples quantitative differences were found for neutral sugars and uronic acids among samples of the same type of vegetal organ. The NSP values determined using CG method were in good agreement with HPLC method (R(2) = 0.9005). However, arabinose, mannose, and galactose plus rhamnose are more influenced by the analytical method used than the rest of the monomers in nearly all the samples analyzed. Final values of NSP depend on the method used in celery stalks, broccoli, and green pepper.

  14. Comparative assessment of cyclic J-R curve determination by different methods in a pressure vessel steel

    Energy Technology Data Exchange (ETDEWEB)

    Chowdhury, Tamshuk, E-mail: tamshuk@gmail.com [Deep Sea Technologies, National Institute of Ocean Technology, Chennai, 600100 (India); Sivaprasad, S.; Bar, H.N.; Tarafder, S. [Fatigue & Fracture Group, Materials Science and Technology Division, CSIR-National Metallurgical Laboratory, Jamshedpur, 831007 (India); Bandyopadhyay, N.R. [School of Materials Science and Engineering, Indian Institute of Engineering, Science and Technology, Shibpur, Howrah, 711103 (India)

    2016-04-15

    Cyclic J-R behaviour of a reactor pressure vessel steel using different methods available in literature has been examined to identify the best suitable method for cyclic fracture problems. Crack opening point was determined by moving average method. The η factor was experimentally determined for cyclic loading conditions and found to be similar to that of ASTM value. Analyses showed that adopting a procedure analogous to the ASTM standard for monotonic fracture is reasonable for cyclic fracture problems, and makes the comparison to monotonic fracture results straightforward. - Highlights: • Different methods of cyclic J-R evaluation compared. • A moving average method for closure point proposed. • η factor for cyclic J experimentally validated. • Method 1 is easier, provides a lower bound and direct comparison to monotonic fracture.

  15. Determination of As, Se and Sb in different trades and blends of tobacco by neutron activation analysis

    Energy Technology Data Exchange (ETDEWEB)

    Francisconi, Lucilaine S.; Damatto, Sandra R.; Silva, Paulo S.C. da, E-mail: pscsilva@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2011-07-01

    The concentrations of As, Se and Sb were determined in two different cigarette trades (M and F). For each trade, four blends were selected for analysis: red, blue, silver and gold for M and red, blue, silver and fresh for F. The As, Se and Sb concentrations were determined by neutron activation analysis. For the analysis the samples were dried to eliminate moisture and the results were given in dry weight. Samples were irradiated together reference standards materials in the IEA-R1 IPEN reactor and counted in Ge-hiperpure detector. It was observed that As and Sb showed higher concentrations in M than in F and no significant differences were observed between the blends. (author)

  16. Determination of As, Se and Sb in different trades and blends of tobacco by neutron activation analysis

    International Nuclear Information System (INIS)

    Francisconi, Lucilaine S.; Damatto, Sandra R.; Silva, Paulo S.C. da

    2011-01-01

    The concentrations of As, Se and Sb were determined in two different cigarette trades (M and F). For each trade, four blends were selected for analysis: red, blue, silver and gold for M and red, blue, silver and fresh for F. The As, Se and Sb concentrations were determined by neutron activation analysis. For the analysis the samples were dried to eliminate moisture and the results were given in dry weight. Samples were irradiated together reference standards materials in the IEA-R1 IPEN reactor and counted in Ge-hiperpure detector. It was observed that As and Sb showed higher concentrations in M than in F and no significant differences were observed between the blends. (author)

  17. Effective energies and exposure determinations of two different energy X-ray beams incident on a personnel monitor

    International Nuclear Information System (INIS)

    Okuno, E.; Cruz, M.T. da

    1984-01-01

    The effective energy of one X or gamma ray beam can be determined by means of two thermoluminescent (TL) dosemeters mounted between suitable filters. However, it has been observed that personnel monitors exposed to two different energy ionizing radiations provide different effective energies depeding on the type of TL phosphor used. This fact could be a powerful tool for identifying exposures to radiation with quite different effective energies which are very common in practice. Two types of TL dosemeters were used : pellets of cold pressed natural fluoride and NaCl developed in our own laboratory, and LiF, TLD-100 from Harshaw Chemical Co.. Experimental results obtained with these combined dosemeters after irradiation with different sets of exposures and energy values of ionizing radiations are also presented. (Author) [pt

  18. Reflectance-difference spectroscopy as an optical probe for in situ determination of doping levels in GaAs

    Energy Technology Data Exchange (ETDEWEB)

    Lastras-Martinez, A.; Lara-Velazquez, I.; Balderas-Navarro, R.E.; Ortega-Gallegos, J.; Guel-Sandoval, S.; Lastras-Martinez, L.F. [Instituto de Investigacion en Comunicacion Optica, Universidad Autonoma de San Luis Potosi, Alvaro Obregon 64, San Luis Potosi, SLP 78000 (Mexico)

    2008-07-01

    We report on in situ Reflectance Difference Spectroscopy measurements carried out on GaAs(001). Measurements were performed at temperatures of 580 C and 430 C, in both n and p-type doped films and for both (2 x 4) and c(4 x 4) reconstructions. Samples employed were grown by Molecular Beam Epitaxy with doping levels in the range from 10{sup 16}-10{sup 19} cm{sup -3}. We demonstrate the potential of Reflectance Difference Spectroscopy for impurity level determinations under growth conditions. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  19. A comparison of different methods for in-situ determination of heat losses form district heating pipes

    Energy Technology Data Exchange (ETDEWEB)

    Boehm, Benny [Technical Univ. of Denmark, Dept. of Energy Engineering (Denmark)

    1996-11-01

    A comparison of different methods for in-situ determination of heat losses has been carried out on a 273 mm transmission line in Copenhagen. Instrumentation includes temperature sensors, heat flux meters and an infrared camera. The methods differ with regard to time consumption and costs of applying the specific method, demand on accuracy of temperature measurements, sensitivity to computational parameters, e.g. the thermal conductivity of the soil, response to transients in water temperature and the ground, and steady state assumptions in the model used in the interpretation of the measurements. Several of the applied methods work well. (au)

  20. Determination of Leaf Area Index, Total Foliar N, and Normalized Difference Vegetation Index for Arctic Ecosystems Dominated by Cassiope tetragona

    DEFF Research Database (Denmark)

    Campioli, M; Street, LE; Michelsen, Anders

    2009-01-01

    have not been accurately quantified. We address this knowledge gap by (i) direct measurements of LAI and TFN for C. tetragona, and (ii) determining TFN-LAI and LAI–normalized difference vegetation index (NDVI) relationships for typical C. tetragona tundras in the subarctic (Sweden) and High Arctic...... leaf N and biomass. The LAI-NDVI and TFN-LAI relationships showed high correlation and can be used to estimate indirectly LAI and TFN. The LAI-NDVI relationship for C. tetragona vegetation differed from a generic LAI-NDVI relationship for arctic tundra, whereas the TFN-LAI relationship did not. Overall...

  1. Attention, working memory, and phenomenal experience of WM content: memory levels determined by different types of top-down modulation

    OpenAIRE

    Jacob, Jane; Jacobs, Christianne; Silvanto, Juha

    2015-01-01

    What is the role of top-down attentional modulation in consciously accessing working memory (WM) content? In influential WM models, information can exist in different states, determined by allocation of attention; placing the original memory representation in the center of focused attention gives rise to conscious access. Here we discuss various lines of evidence indicating that such attentional modulation is not sufficient for memory content to be phenomenally experienced. We propose that, i...

  2. Direct determination of cadmium in Orujo spirit samples by electrothermal atomic absorption spectrometry: Comparative study of different chemical modifiers

    Energy Technology Data Exchange (ETDEWEB)

    Vilar Farinas, M. [Departamento de Quimica Analitica, Nutricion y Bromatologia, Facultad de Ciencias, Universidad de Santiago de Compostela, Campus de Lugo, 27002 Lugo (Spain); Barciela Garcia, J. [Departamento de Quimica Analitica, Nutricion y Bromatologia, Facultad de Ciencias, Universidad de Santiago de Compostela, Campus de Lugo, 27002 Lugo (Spain); Garcia Martin, S. [Departamento de Quimica Analitica, Nutricion y Bromatologia, Facultad de Ciencias, Universidad de Santiago de Compostela, Campus de Lugo, 27002 Lugo (Spain); Pena Crecente, R. [Departamento de Quimica Analitica, Nutricion y Bromatologia, Facultad de Ciencias, Universidad de Santiago de Compostela, Campus de Lugo, 27002 Lugo (Spain); Herrero Latorre, C. [Departamento de Quimica Analitica, Nutricion y Bromatologia, Facultad de Ciencias, Universidad de Santiago de Compostela, Campus de Lugo, 27002 Lugo (Spain)]. E-mail: cherrero@lugo.usc.es

    2007-05-22

    In this work, several analytical methods are proposed for cadmium determination in Orujo spirit samples using electrothermal atomic absorption spectrometry (ETAAS). Permanent chemical modifiers thermally coated on the platforms inserted in pyrolytic graphite tubes (such as W, Ir, Ru, W-Ir and W-Ru) were comparatively studied in relation to common chemical modifier mixtures [Pd-Mg(NO{sub 3}){sub 2} and (NH{sub 4})H{sub 2}PO{sub 4}-Mg(NO{sub 3}){sub 2}] for cadmium stabilization. Different ETAAS Cd determination methods based on the indicated modifiers have been developed. In each case, pyrolysis and atomization temperatures, atomization shapes, characteristic masses and detection limits as well as other analytical characteristics have been determined. All the assayed modifiers (permanent and conventional) were capable of achieving the appropriate stabilization of the analyte, with the exception of Ru and W-Ru. Moreover, for all developed methods, recoveries (99-102%) and precision (R.S.D. lower than 10%) were acceptable. Taking into account the analytical performance (best detection limit LOD = 0.01 {mu}g L{sup -1}), the ETAAS method based on the use of W as a permanent modifier was selected for further direct Cd determinations in Orujo samples from Galicia (NW Spain). The chosen method was applied in the determination of the Cd content in 38 representative Galician samples. The cadmium concentrations ranged

  3. Study on different pre-treatment procedures for metal determination in Orujo spirit samples by ICP-AES

    International Nuclear Information System (INIS)

    Barciela, Julia; Vilar, Manuela; Garcia-Martin, Sagrario; Pena, Rosa M.; Herrero, Carlos

    2008-01-01

    In this work several pre-treatment methods were studied for metal (Na, K, Mg, Cu and Ca) determination in Orujo spirit samples using inductively coupled plasma atomic emission spectrometry (ICP-AES). Dilution, digestion, evaporation, and cryogenic desolvatation techniques were comparatively evaluated. Because of their analytical characteristics, digestion and evaporation with nitrogen current were found to be appropriate procedures for the determination of metals in alcoholic spirit samples. Yet, if simplicity and application time are to be considered, the latter-evaporation in a water bath with a nitrogen current-stands out as the optimum procedure for any further determinations in Orujo samples by ICP-AES. Low detection levels and wide linear ranges (sufficient to determine these metals in the samples studied) were achieved for each metal. The recoveries (in the 97.5-100.5% range) and the precision (R.S.D. lower than 5.6%) obtained were also satisfactory. The selected procedure was applied to determine the content of metals in 80 representative Galician Orujo spirit samples with and without a Certified Brand of Origin (CBO) which had been produced using different distillation systems. The metal concentrations ranged between 0.37 and 79.7 mg L -1 for Na, -1 for K, 0.02-4.83 mg L -1 for Mg content, -1 for Cu and 0.03-13.10 mg L -1 for Ca

  4. Direct determination of cadmium in Orujo spirit samples by electrothermal atomic absorption spectrometry: Comparative study of different chemical modifiers

    International Nuclear Information System (INIS)

    Vilar Farinas, M.; Barciela Garcia, J.; Garcia Martin, S.; Pena Crecente, R.; Herrero Latorre, C.

    2007-01-01

    In this work, several analytical methods are proposed for cadmium determination in Orujo spirit samples using electrothermal atomic absorption spectrometry (ETAAS). Permanent chemical modifiers thermally coated on the platforms inserted in pyrolytic graphite tubes (such as W, Ir, Ru, W-Ir and W-Ru) were comparatively studied in relation to common chemical modifier mixtures [Pd-Mg(NO 3 ) 2 and (NH 4 )H 2 PO 4 -Mg(NO 3 ) 2 ] for cadmium stabilization. Different ETAAS Cd determination methods based on the indicated modifiers have been developed. In each case, pyrolysis and atomization temperatures, atomization shapes, characteristic masses and detection limits as well as other analytical characteristics have been determined. All the assayed modifiers (permanent and conventional) were capable of achieving the appropriate stabilization of the analyte, with the exception of Ru and W-Ru. Moreover, for all developed methods, recoveries (99-102%) and precision (R.S.D. lower than 10%) were acceptable. Taking into account the analytical performance (best detection limit LOD = 0.01 μg L -1 ), the ETAAS method based on the use of W as a permanent modifier was selected for further direct Cd determinations in Orujo samples from Galicia (NW Spain). The chosen method was applied in the determination of the Cd content in 38 representative Galician samples. The cadmium concentrations ranged -1

  5. Determination of optimum insulation thicknesses of the external walls and roof (ceiling) for Turkey's different degree-day regions

    International Nuclear Information System (INIS)

    Sisman, Nuri; Kahya, Emin; Aras, Nil; Aras, Haydar

    2007-01-01

    The external walls and roof of a building are the interface between its interior and the outdoor environment. Insulation of the external walls and roof is the most cost-effective way of controlling the outside elements to make homes more comfortable. Although insulation is generally accepted as a factor increasing the building costs, with the calculations we have shown that this is not the case. Fuel consumption and operational costs are reduced by increasing the thickness of the external walls and roof (ceiling), despite an increase in the investment costs. According to Turkish Standard Number 825 (TS 825), there are four different degree-day (DD) regions, and the required heat loads for the buildings in these regions exhibit large differences. Therefore, a method based on costs is needed for the determination of optimum insulation thicknesses of different DD regions. In this study, optimum insulation thicknesses for different DD regions of Turkey, namely, Izmir (DD: 1450), Bursa (DD: 2203), Eskisehir (DD: 3215) and Erzurum (DD: 4856), have been determined for a lifetime of N years, maximizing the present worth value of annual energy savings for insulated external walls

  6. Determining the impact of oxidation on the motility of single muscle-fibres expressing different myosin isoforms

    DEFF Research Database (Denmark)

    Spanos, Dimitrios; Li, M.; Baron, Caroline P.

    2013-01-01

    heavy chain (MyHC) isoforms has not been previously investigated. Oxidation of myosin isolated from muscle fibres originating from various porcine muscles with a different metabolic profile was studied using a single muscle fibre in-vitro motility assay, allowing measurements of catalytic properties...... (motility speed) and force-generation capacity of specific MyHC isoforms. In the experimental procedure, single muscle fibres were split in different segments and each segment was exposed to a different concentration of hydrogen peroxide. Speed and force measurements were recorded and compared, to assess...... the effect of myosin oxidation on motility and force. The MyHC isoform expression in the single muscle fibre was subsequently determined on silver-stained gel SDS-PAGE. Preliminary results indicate a decrease of directionality and speed of the in-vitro motility as a result of an oxidative environment...

  7. Embryonic aneuploidy does not differ among genetic ancestry according to continental origin as determined by ancestry informative markers.

    Science.gov (United States)

    Franasiak, Jason M; Olcha, Meir; Shastri, Shefali; Molinaro, Thomas A; Congdon, Haley; Treff, Nathan R; Scott, Richard T

    2016-10-01

    Is embryonic aneuploidy, as determined by comprehensive chromosome screening (CCS), related to genetic ancestry, as determined by ancestry informative markers (AIMs)? In this study, when determining continental ancestry utilizing AIMs, genetic ancestry does not have an impact on embryonic aneuploidy. Aneuploidy is one of the best-characterized barriers to ART success and little information exists regarding ethnicity and whole chromosome aneuploidy in IVF. Classifying continental ancestry utilizing genetic profiles from a selected group of single nucleotide polymorphisms, termed AIMs, can determine ancestral origin with more accuracy than self-reported data. This is a retrospective cohort study of patients undergoing their first cycle of IVF with CCS at a single center from 2008 to 2014. There were 2328 patients identified whom had undergone IVF/CCS and AIM genotyping. All patients underwent IVF/ICSI and CCS after trophectoderm biopsy. Patients' serum was genotyped using 32 custom AIMs to identify continental origin. Admixture proportions were determined using Bayesian clustering algorithms. Patients were assigned to the population (European, African, East Asian or Central/South Asian) corresponding to their greatest admixture proportion. The mean number of embryos tested was 5.3 (range = 1-40) and the mode was 1. Patients' ethnic classifications revealed European (n = 1698), African (n = 103), East Asian (n = 206) or Central/South Asian (n = 321). When controlling for age and BMI, aneuploidy rate did not differ by genetic ancestry (P = 0.28). The study type (retrospective) and the ability to classify patients by continental rather than sub-continental origin as well as the predominantly European patient mix may impact generalizability. Post hoc power calculation revealed power to detect a 16.8% difference in embryonic aneuploidy between the two smallest sample size groups. These data do not support differences in embryonic aneuploidy among various genetic

  8. The Sensory Difference Threshold of Menthol Odor in Flavored Tobacco Determined by Combining Sensory and Chemical Analysis.

    Science.gov (United States)

    Krüsemann, Erna J Z; Cremers, Johannes W J M; Visser, Wouter F; Punter, Pieter H; Talhout, Reinskje

    2017-03-01

    Cigarettes are an often-used consumer product, and flavor is an important determinant of their product appeal. Cigarettes with strong nontobacco flavors are popular among young people, and may facilitate smoking initiation. Discriminating flavors in tobacco is important for regulation purposes, for instance to set upper limits to the levels of important flavor additives. We provide a simple and fast method to determine the human odor difference threshold for flavor additives in a tobacco matrix, using a combination of chemical and sensory analysis. For an example, the human difference threshold for menthol odor, one of the most frequently used tobacco flavors, was determined. A consumer panel consisting of 20 women compared different concentrations of menthol-flavored tobacco to unflavored cigarette tobacco using the 2-alternative forced choice method. Components contributing to menthol odor were quantified using headspace GC-MS. The sensory difference threshold of menthol odor corresponded to a mixture of 43 (37-50)% menthol-flavored tobacco, containing 1.8 (1.6-2.1) mg menthol, 2.7 (2.3-3.1) µg menthone, and 1.0 (0.9-1.2) µg neomenthyl acetate per gram of tobacco. Such a method is important in the context of the European Tobacco Product Directive, and the US Food and Drug Administration Tobacco Control Act, that both prohibit cigarettes and roll-your-own tobacco with a characterizing flavor other than tobacco. Our method can also be adapted for matrices other than tobacco, such as food. © The Author 2016. Published by Oxford University Press.

  9. The effect of different propolis harvest methods on its lead contents determined by ET AAS and UV-visS

    Energy Technology Data Exchange (ETDEWEB)

    Sales, A. [Department of Analytical Chemistry, Faculty of Biochemistry, Chemistry and Pharmacy, National University of Tucuman, Ayacucho 471, 4000 Tucuman (Argentina)]. E-mail: amsales@fbqf.unt.edu.ar; Alvarez, A. [National Institute of Agricultural Technology (INTA), Experimental Station Famailla, Ruta 301, Km 32, Famailla, Tucuman (Argentina); Areal, M. Rodriguez [Department of Analytical Chemistry, Faculty of Biochemistry, Chemistry and Pharmacy, National University of Tucuman, Ayacucho 471, 4000 Tucuman (Argentina); Maldonado, L. [National Institute of Agricultural Technology (INTA), Experimental Station Famailla, Ruta 301, Km 32, Famailla, Tucuman (Argentina); Marchisio, P. [Department of Analytical Chemistry, Faculty of Biochemistry, Chemistry and Pharmacy, National University of Tucuman, Ayacucho 471, 4000 Tucuman (Argentina); Rodriguez, M. [Department of Analytical Chemistry, Faculty of Biochemistry, Chemistry and Pharmacy, National University of Tucuman, Ayacucho 471, 4000 Tucuman (Argentina); Bedascarrasbure, E. [National Institute of Agricultural Technology (INTA), Experimental Station Famailla, Ruta 301, Km 32, Famailla, Tucuman (Argentina)

    2006-10-11

    Argentinean propolis is exported to different countries, specially Japan. The market demands propolis quality control according to international standards. The analytical determination of some metals, as lead in food, is very important for their high toxicity even in low concentrations and because of their harmful effects on health. Flavonoids, the main bioactive compounds of propolis, tend to chelate metals as lead, which becomes one of the main polluting agents of propolis. The lead found in propolis may come from the atmosphere or it may be incorporated in the harvest, extraction and processing methods. The aim of this work is to evaluate lead level on Argentinean propolis determined by electrothermal atomic absorption spectrometry (ET AAS) and UV-vis spectrophotometry (UV-visS) methods, as well as the effect of harvest methods on those contents. A randomized test with three different treatments of collection was made to evaluate the effect of harvest methods. These procedures were: separating wedges (traditional), netting plastic meshes and stamping out plastic meshes. By means of the analysis of variance technique for multiple comparisons (ANOVA) it was possible to conclude that there are significant differences between scraped and mesh methods (stamped out and mosquito netting meshes). The results obtained in the present test would allow us to conclude that mesh methods are more advisable than scraped ones in order to obtain innocuous and safe propolis with minor lead contents. A statistical comparison of lead determination by both, ET AAS and UV-visS methods, demonstrated that there is not a significant difference in the results achieved with the two analytical techniques employed.

  10. Determination and identification of synthetic cannabinoids and their metabolites in different matrices by modern analytical techniques – a review

    Energy Technology Data Exchange (ETDEWEB)

    Znaleziona, Joanna; Ginterová, Pavlína; Petr, Jan [Regional Centre of Advanced Technologies and Materials, Department of Analytical Chemistry, Faculty of Science, Palacký University, 17. Listopadu 12, Olomouc CZ-77146 (Czech Republic); Ondra, Peter; Válka, Ivo [Department of Forensic Medicine and Medical Law Faculty Hospital, Hněvotínská 3, Olomouc CZ-77146 (Czech Republic); Ševčík, Juraj [Regional Centre of Advanced Technologies and Materials, Department of Analytical Chemistry, Faculty of Science, Palacký University, 17. Listopadu 12, Olomouc CZ-77146 (Czech Republic); Chrastina, Jan [Institute of Special Education Studies, Faculty of Education, Palacký University, Žižkovo náměsti 5, Olomouc CZ-77146 (Czech Republic); Maier, Vítězslav, E-mail: vitezslav.maier@upol.cz [Regional Centre of Advanced Technologies and Materials, Department of Analytical Chemistry, Faculty of Science, Palacký University, 17. Listopadu 12, Olomouc CZ-77146 (Czech Republic)

    2015-05-18

    Highlights: • Synthetic cannabinoids from analytical point of view. • Determination and identification methods of synthetic cannabinoids in different matrices. • Analytical techniques used from thin layer chromatography to high resolution mass spectrometry. • Detailed survey of gas and liquid chromatography methods for synthetic cannabinoids analysis. - Abstract: Synthetic cannabinoids have gained popularity due to their easy accessibility and psychoactive effects. Furthermore, they cannot be detected in urine by routine drug monitoring. The wide range of active ingredients in analyzed matrices hinders the development of a standard analytical method for their determination. Moreover, their possible side effects are not well known which increases the danger. This review is focused on the sample preparation and the determination of synthetic cannabinoids in different matrices (serum, urine, herbal blends, oral fluid, hair) published since 2004. The review includes separation and identification techniques, such as thin layer chromatography, gas and liquid chromatography and capillary electrophoresis, mostly coupled with mass spectrometry. The review also includes results by spectral methods like infrared spectroscopy, nuclear magnetic resonance or direct-injection mass spectrometry.

  11. Determination and identification of synthetic cannabinoids and their metabolites in different matrices by modern analytical techniques – a review

    International Nuclear Information System (INIS)

    Znaleziona, Joanna; Ginterová, Pavlína; Petr, Jan; Ondra, Peter; Válka, Ivo; Ševčík, Juraj; Chrastina, Jan; Maier, Vítězslav

    2015-01-01

    Highlights: • Synthetic cannabinoids from analytical point of view. • Determination and identification methods of synthetic cannabinoids in different matrices. • Analytical techniques used from thin layer chromatography to high resolution mass spectrometry. • Detailed survey of gas and liquid chromatography methods for synthetic cannabinoids analysis. - Abstract: Synthetic cannabinoids have gained popularity due to their easy accessibility and psychoactive effects. Furthermore, they cannot be detected in urine by routine drug monitoring. The wide range of active ingredients in analyzed matrices hinders the development of a standard analytical method for their determination. Moreover, their possible side effects are not well known which increases the danger. This review is focused on the sample preparation and the determination of synthetic cannabinoids in different matrices (serum, urine, herbal blends, oral fluid, hair) published since 2004. The review includes separation and identification techniques, such as thin layer chromatography, gas and liquid chromatography and capillary electrophoresis, mostly coupled with mass spectrometry. The review also includes results by spectral methods like infrared spectroscopy, nuclear magnetic resonance or direct-injection mass spectrometry

  12. Optimization, validation and application of UV-Vis spectrophotometric-colorimetric methods for determination of trimethoprim in different medicinal products

    Directory of Open Access Journals (Sweden)

    Goran Stojković

    2016-03-01

    Full Text Available Two simple, sensitive, selective, precise, and accurate methods for determination of trimethoprim in different sulfonamide formulations intended for use in human and veterinary medicine were optimized and validated. The methods are based on the trimethoprim reaction with bromcresol green (BCG and 2,4-dinitro-1-fluorobenzene (DNFB. As extraction solvents we used 10 % N,N-dimethylacetamide in methanol and acetone for both methods, respectively. The colored products are quantified applying visible spectrophotometry at their corresponding absorption maxima. The methods were validated for linearity, sensitivity, accuracy, and precision. We tested the method applicability on four different medicinal products in tablet and powder forms containing sulfametrole and sulfamethoxazole in combination with trimethoprim. The results revealed that both methods are equally accurate with recoveries within the range 95-105 %. The obtained between-day precision for both methods, when applied on four different medicinal products, was within in the range 1.08-3.20 %. By applying the F-statistical test (P<0.05, it was concluded that for three medicinal products tested both methods are applicable with statistically insignificant difference in precision. The optimized and validated BCG and DNFB methods could find application in routine quality control of trimethoprim in various formulation forms, at different concentration levels, and in combination with different sulfonamides.

  13. Comparison of different methods for determining the size of a focal spot of microfocus X-ray tubes

    International Nuclear Information System (INIS)

    Salamon, M.; Hanke, R.; Krueger, P.; Sukowski, F.; Uhlmann, N.; Voland, V.

    2008-01-01

    The EN 12543-5 describes a method for determining the focal spot size of microfocus X-ray tubes up to a minimum spot size of 5 μm. The wide application of X-ray tubes with even smaller focal spot sizes in computed tomography and radioscopy applications requires the evaluation of existing methods for focal spot sizes below 5 μm. In addition, new methods and conditions for determining submicron focal spot sizes have to be developed. For the evaluation and extension of the present methods to smaller focal spot sizes, different procedures in comparison with the existing EN 12543-5 were analyzed and applied, and the results are presented

  14. Simultaneous multi-element determination in different seed samples of Dodonaea viscosa hopseed using instrumental neutron activation analysis

    International Nuclear Information System (INIS)

    El-Sweify, Fatma H.; El-Amir, Mahmoud A.; Mostafa, Mohamed; Ramadan, Hala E.; Rashad, Ghada M.

    2016-01-01

    Instrumental neutron activation analysis technique (INAA) was applied for nondestructive multi-element analysis of seed samples of the plant Dodonaea viscosa hopseed. This plant is distributed all over Egypt, because of its suitable properties. The samples were collected from some bushes grown at different sites in some governorates, in July of each year during the period from 2004 to 2011. The determined elements are: Co, Cs, Eu, Fe, Hg, Ni, Rb, Sc, Se, Sr and Zn, under the chosen irradiation and cooling times. The content of some elements has been compared with data obtained from previous work on analysis of various kinds of seeds. The influence of some parameters on the determined elemental content is discussed. Standard reference materials IAEA-155 and IAEA-V-10 were used to assure quality control, accuracy and precision of the technique.

  15. Simultaneous multi-element determination in different seed samples of Dodonaea viscosa hopseed using instrumental neutron activation analysis

    Energy Technology Data Exchange (ETDEWEB)

    El-Sweify, Fatma H.; El-Amir, Mahmoud A.; Mostafa, Mohamed; Ramadan, Hala E.; Rashad, Ghada M. [Atomic Energy Authority, Cairo (Egypt). Hot Lab. Center

    2016-07-01

    Instrumental neutron activation analysis technique (INAA) was applied for nondestructive multi-element analysis of seed samples of the plant Dodonaea viscosa hopseed. This plant is distributed all over Egypt, because of its suitable properties. The samples were collected from some bushes grown at different sites in some governorates, in July of each year during the period from 2004 to 2011. The determined elements are: Co, Cs, Eu, Fe, Hg, Ni, Rb, Sc, Se, Sr and Zn, under the chosen irradiation and cooling times. The content of some elements has been compared with data obtained from previous work on analysis of various kinds of seeds. The influence of some parameters on the determined elemental content is discussed. Standard reference materials IAEA-155 and IAEA-V-10 were used to assure quality control, accuracy and precision of the technique.

  16. Nitrogen content determinations in different stages of thermal treatment involved in conversion of ammonium diuranate to uranium metal

    International Nuclear Information System (INIS)

    Shrivastava, K.C.; Shelke, G.P.

    2017-01-01

    Determination of nitrogen content in the uranium metal and uranium oxide based reactor fuels is important to meet the requirement of specifications given by fuel designer. Therefore, a systematic study was carried out to determine the variations in nitrogen content during the conversion of ammonium diuranate (ADU) to uranium oxides (UO 3 and UO 2 ), and finally to uranium metal by inert gas fusion-thermal conductivity detection (IGF-TCD) technique. To understand the measured nitrogen content variations, the thermal decomposition study of ADU was carried out using thermogravimetry (TG)/differential thermogravimetry (DTG) and differential thermal analysis (DTA) in the temperature range of 25-1073 K. Powder X-ray diffraction (XRD) technique was used to confirm the formation of uranium oxide precursors at different temperature. (author)

  17. Seasonal Differences in Determinants of Time Location Patterns in an Urban Population: A Large Population-Based Study in Korea.

    Science.gov (United States)

    Lee, Sewon; Lee, Kiyoung

    2017-06-22

    Time location patterns are a significant factor for exposure assessment models of air pollutants. Factors associated with time location patterns in urban populations are typically due to high air pollution levels in urban areas. The objective of this study was to determine the seasonal differences in time location patterns in two urban cities. A Time Use Survey of Korean Statistics (KOSTAT) was conducted in the summer, fall, and winter of 2014. Time location data from Seoul and Busan were collected, together with demographic information obtained by diaries and questionnaires. Determinants of the time spent at each location were analyzed by multiple linear regression and the stepwise method. Seoul and Busan participants had similar time location profiles over the three seasons. The time spent at own home, other locations, workplace/school and during walk were similar over the three seasons in both the Seoul and Busan participants. The most significant time location pattern factors were employment status, age, gender, monthly income, and spouse. Season affected the time spent at the workplace/school and other locations in the Seoul participants, but not in the Busan participants. The seasons affected each time location pattern of the urban population slightly differently, but overall there were few differences.

  18. Differences in the surface texture of aggregate particles determined by 3D model derived from optic microscope measurements

    Directory of Open Access Journals (Sweden)

    Jozef Komačka

    2015-12-01

    Full Text Available The surface texture of aggregate particles was investigated based on the 3D model of surface generated from the measurements by optic microscope. New software MicroSYS was developed to determine the wrapping plane of 3D model of aggregate using the function called “Thin plate spline“. New parameter for evaluation of surface texture of aggregate particle was proposed as the volumetric difference between two planes (wrapping plane and aggregate surface. Applicability of this parameters was tested on two aggregate fractions (4/8 and 8/11 coming form 11 quarries in Slovakia. The tested aggregates differed from petrography point of view and ranged from soft to hard. The difference among the quarries and also between fractions of aggregate was found out. The better surface texture was observed for the finner fraction of aggregate. Simultaneously, the better results were determined in the case of aggregate produced from the ingeous intrusive or extrusive rocks comparing to the sedimentary carbonate rocks aggregate.

  19. A comparison between isotopic and different methods for determining urea fertilizer use efficiency under trickle figuration on tomato

    International Nuclear Information System (INIS)

    Mousavi Shalmani, M.A.; Sagheb, N.; Rafii, H.; Hobbi, M.S.; Khorosani, A.

    2002-01-01

    In order to study the fertilizer use efficiency by two different methods, an experimental design was conducted in Randomized Complete Block (RBC) with four replications and treatments in the plots with 35 square meter, area. 1200 seedlings of tomato (variety of early Urbana V.F.) were planted on June 3. 1996 at the distances of 50 cm apart. Fertilization and irrigation were performed by two fertilizer pumps (one for P and K and the other for N). The treatments of N 0 , N 1 , N 2 and N 3 received 0, 287.5, 575 and 862.5 kg N/ha respectively. The 14 N/ 15 N isotopic ratio of nitrogen gas was determined by the use of emission spectrometer and the fertilizer use efficiency was determined by using nuclear chemical equations. Because of the shortage of micro nutrients in soil and unbalanced quantity of N,P and K as fertilizers the results have shown a large amount of free radicals (NH 4 , NO 3 ) remained in the soil. This disturbed the balance between absorption of nitrogen from its different sources in the soil. Therefor, the share of fertilizer increased and in this condition, the priming effects were seen and different methods showed lower amounts of fertilizer use efficiency in comparison with the isotopic method

  20. Multiclass pesticide determination in olives and their processing factors in olive oil: comparison of different olive oil extraction systems.

    Science.gov (United States)

    Amvrazi, Elpiniki G; Albanis, Triantafyllos A

    2008-07-23

    The processing factors (pesticide concentration found in olive oil/pesticide concentration found in olives) of azinphos methyl, chlorpyrifos, lambda-cyhalothrin, deltamethrin, diazinon, dimethoate, endosulfan, and fenthion were determined in olive oil production process in various laboratory-scale olive oil extractions based on three- or two-phase centrifugation systems in comparison with samples collected during olive oil extractions in conventional olive mills located at different olive oil production areas in Greece. Pesticide analyses were performed using a multiresidue method developed in our laboratory for the determination of different insecticides and herbicides in olive oil by solid-phase extraction techniques coupled to gas chromatography detection (electron capture detection and nitrogen phosphorus detection), optimized, and validated for olive fruits sample preparation. Processing factors were found to vary among the different pesticides studied. Water addition in the oil extraction procedure (as in a three-phase centrifugation system) was found to decrease the processing factors of dimethoate, alpha-endosulfan, diazinon, and chlorpyrifos, whereas those of fenthion, azinphos methyl, beta-endosulfan, lambda-cyhalothrin, and deltamethrin residues were not affected. The water content of olives processed was found to proportionally affect pesticide processing factors. Fenthion sulfoxide and endosulfan sulfate were the major metabolites of fenthion and endosulfan, respectively, that were detected in laboratory-produced olive oils, but only the concentration of fenthion sulfoxide was found to increase with the increase of water addition in the olive oil extraction process.

  1. Seasonal Differences in Determinants of Time Location Patterns in an Urban Population: A Large Population-Based Study in Korea

    Directory of Open Access Journals (Sweden)

    Sewon Lee

    2017-06-01

    Full Text Available Time location patterns are a significant factor for exposure assessment models of air pollutants. Factors associated with time location patterns in urban populations are typically due to high air pollution levels in urban areas. The objective of this study was to determine the seasonal differences in time location patterns in two urban cities. A Time Use Survey of Korean Statistics (KOSTAT was conducted in the summer, fall, and winter of 2014. Time location data from Seoul and Busan were collected, together with demographic information obtained by diaries and questionnaires. Determinants of the time spent at each location were analyzed by multiple linear regression and the stepwise method. Seoul and Busan participants had similar time location profiles over the three seasons. The time spent at own home, other locations, workplace/school and during walk were similar over the three seasons in both the Seoul and Busan participants. The most significant time location pattern factors were employment status, age, gender, monthly income, and spouse. Season affected the time spent at the workplace/school and other locations in the Seoul participants, but not in the Busan participants. The seasons affected each time location pattern of the urban population slightly differently, but overall there were few differences.

  2. Major differences in prevalence of overweight according to nationality in preschool children living in Germany: determinants and public health implications.

    Science.gov (United States)

    Kuepper-Nybelen, J; Lamerz, A; Bruning, N; Hebebrand, J; Herpertz-Dahlmann, B; Brenner, H

    2005-04-01

    To investigate the prevalence of overweight according to nationality in preschool children living in Germany, and to establish the determinants responsible for differences in body mass index. The study was performed within the context of the 2001/2002 obligatory health examination before school entry in the city of Aachen, Germany. Of 2020 eligible children 1979 children were recruited (participation rate: 98%). Children's height and weight were measured using a standardised protocol. The parents completed a standardised questionnaire on sociodemographic factors and possible determinants of nutritional status. Being overweight was defined according to age and sex specific reference values for German children as well as according to international reference values. The study population included 452 (22.9%) children with other than German nationality. Among these children the prevalence of overweight was twice as high than among German children (14.8% v 7.2%). Prevalence of most known risk factors for overweight, such as low physical activity, high consumption of soft drinks, and frequent visits to fast-food restaurants was higher in the children with other nationalities than in the German children. Multivariate analyses revealed that most of the difference in prevalence of obesity by nationality is explained by known risk factors of overweight, especially education of mother and watching TV. The apparent ethnic differences could be explained by two non-ethnic but socioeconomic factors. In preventing overweight in children, there is the need to identify and deal with high risk environments rather than high risk ethnic groups.

  3. Application of Hplc-Pda Method Using Two Different Extraction Procedures for the Determination of Alkylresorcinols in Cereals

    Directory of Open Access Journals (Sweden)

    Gailāne Natālija

    2015-09-01

    Full Text Available Cereals, especially barley, are an important source of vitamins, minerals, dietary fibre and various phytochemicals, such as alkylresorcinols (ARs. Cereal ARs are a group of phenolic lipids located in the outer parts of grain, particularly in rye and wheat, but not found in refined flour or in refined products from cereals. This study focuses on the comparison of different extraction procedures applied for the determination of the content of ARs (C15:0 - C23:0 in grain of Latvian barley genotypes. The content of ARs in 1 rye and 16 barley samples grown with different amounts of fertilier was determined by High Performance Liquid Chromatography method with Photodiode Array detection (HPLC-PDA developed by us. Two different extraction methods were compared: accelerated Soxhlet extraction and 24-hour extraction. Aside from validation of the extraction procedures, validation parameters for the HPLC-PDA based quantitation method were provided. The coefficients of variation for repeatability and intermediate precision were < 9% and < 3%, respectively. The content of ARs determined with the HPLC-PDA method in conjunction with accelerated Soxhlet extraction was up to 1.5 times higher than using 24-hour extraction. AR content varied from 2.11 ± 0.04 to 3.80 ± 0.10 mg·100 g-1 for 24-hour extraction and from 2.66 ± 0.06 to 5.70 ± 0.20 mg·100 g-1 for accelerated Soxhlet extraction, indicating the increased efficiency of this procedure in analysis of ARs.

  4. Study on different pre-treatment procedures for metal determination in Orujo spirit samples by ICP-AES

    Energy Technology Data Exchange (ETDEWEB)

    Barciela, Julia; Vilar, Manuela; Garcia-Martin, Sagrario [Departamento de Quimica Analitica, Nutricion y Bromatologia, Facultad de Ciencias, Universidad de Santiago de Compostela, Campus de Lugo, 27002 Lugo (Spain); Pena, Rosa M. [Departamento de Quimica Analitica, Nutricion y Bromatologia, Facultad de Ciencias, Universidad de Santiago de Compostela, Campus de Lugo, 27002 Lugo (Spain)], E-mail: qarosa@lugo.usc.es; Herrero, Carlos [Departamento de Quimica Analitica, Nutricion y Bromatologia, Facultad de Ciencias, Universidad de Santiago de Compostela, Campus de Lugo, 27002 Lugo (Spain)], E-mail: cherrero@lugo.usc.es

    2008-10-17

    In this work several pre-treatment methods were studied for metal (Na, K, Mg, Cu and Ca) determination in Orujo spirit samples using inductively coupled plasma atomic emission spectrometry (ICP-AES). Dilution, digestion, evaporation, and cryogenic desolvatation techniques were comparatively evaluated. Because of their analytical characteristics, digestion and evaporation with nitrogen current were found to be appropriate procedures for the determination of metals in alcoholic spirit samples. Yet, if simplicity and application time are to be considered, the latter-evaporation in a water bath with a nitrogen current-stands out as the optimum procedure for any further determinations in Orujo samples by ICP-AES. Low detection levels and wide linear ranges (sufficient to determine these metals in the samples studied) were achieved for each metal. The recoveries (in the 97.5-100.5% range) and the precision (R.S.D. lower than 5.6%) obtained were also satisfactory. The selected procedure was applied to determine the content of metals in 80 representative Galician Orujo spirit samples with and without a Certified Brand of Origin (CBO) which had been produced using different distillation systems. The metal concentrations ranged between 0.37 and 79.7 mg L{sup -1} for Na,

  5. Determination of doses to different organs and prediction of health detriment, after hypothetical accident in mtr reactor core

    Energy Technology Data Exchange (ETDEWEB)

    Amin, E A; Abd El-Ghani, A H [National Center of Nuclear Safety and Radiation Control Atomic Energy Authority, Cairo (Egypt)

    1997-12-31

    As a result of pypothetical accidents with release of high amount of fission products, the doses to different organs consequent upon inhalation of radioactive fission products are calculated. The processes are modeled using the ORIGIN and TIRION-4 codes: source term, containment and activity enclosure, time dependent activity behaviour in the building, and radiation exposure in the reactor building. Prediction of health detriments were calculated using ICRP-60 nominal probability coefficients and organ doses determined for bone, lung, and thyroid gland, after whole body exposure from internal inhalation and external emmersion. 11 tabs.

  6. Different Reactive Oxygen Species Scavenging Properties of Flavonoids Determine Their Abilities to Extend the Shelf Life of Tomato1[OPEN

    Science.gov (United States)

    Zhang, Yang; De Stefano, Rosalba; Robine, Marie; Butelli, Eugenio; Bulling, Katharina; Hill, Lionel; Rejzek, Martin; Martin, Cathie; Schoonbeek, Henk-jan

    2015-01-01

    The shelf life of tomato (Solanum lycopersicum) fruit is determined by the processes of overripening and susceptibility to pathogens. Postharvest shelf life is one of the most important traits for commercially grown tomatoes. We compared the shelf life of tomato fruit that accumulate different flavonoids and found that delayed overripening is associated with increased total antioxidant capacity caused by the accumulation of flavonoids in the fruit. However, reduced susceptibility to Botrytis cinerea, a major postharvest fungal pathogen of tomato, is conferred by specific flavonoids only. We demonstrate an association between flavonoid structure, selective scavenging ability for different free radicals, and reduced susceptibility to B. cinerea. Our study provides mechanistic insight into how flavonoids influence the shelf life, information that could be used to improve the shelf life of tomato and, potentially, other soft fruit. PMID:26082399

  7. Different Reactive Oxygen Species Scavenging Properties of Flavonoids Determine Their Abilities to Extend the Shelf Life of Tomato.

    Science.gov (United States)

    Zhang, Yang; De Stefano, Rosalba; Robine, Marie; Butelli, Eugenio; Bulling, Katharina; Hill, Lionel; Rejzek, Martin; Martin, Cathie; Schoonbeek, Henk-jan

    2015-11-01

    The shelf life of tomato (Solanum lycopersicum) fruit is determined by the processes of overripening and susceptibility to pathogens. Postharvest shelf life is one of the most important traits for commercially grown tomatoes. We compared the shelf life of tomato fruit that accumulate different flavonoids and found that delayed overripening is associated with increased total antioxidant capacity caused by the accumulation of flavonoids in the fruit. However, reduced susceptibility to Botrytis cinerea, a major postharvest fungal pathogen of tomato, is conferred by specific flavonoids only. We demonstrate an association between flavonoid structure, selective scavenging ability for different free radicals, and reduced susceptibility to B. cinerea. Our study provides mechanistic insight into how flavonoids influence the shelf life, information that could be used to improve the shelf life of tomato and, potentially, other soft fruit. © 2015 American Society of Plant Biologists. All Rights Reserved.

  8. A Study on the Pyrolysis of Peanut Shells at Different Isothermal Conditions and Determination of the Kinetic Parameters

    Directory of Open Access Journals (Sweden)

    Şeyda Taşar

    2015-12-01

    Full Text Available The pyrolysis process, which is applied for the aim of producing energy and raw materials which are implemented for the chemical industry from biomass sources, is a thermal conversion process. Determination of the pyrolysis kinetic parameters are important In order to suitable equipment and process design. In this target, in the study the pyrolysis of peanut shells was conducted in a muffle furnace at static atmosphere with temperatures ranging from 300-700 °C. The effects of various parameters on the rate of thermal decomposition rate and the solid yield were determined. The parameters of interest were temperature 300-700 °C, particle size 4-50 mesh, pelletizing, and pelletizing pressure 1.103-5.103 kgf/cm2. Regression coefficients for the total decomposition step were obtained using the thermographs were obtained as a result of the pyrolysis of the peanut shells, and 20 different theoretical model equations that represented the degradation by the Coast-Redfern method. According to regression coefficients of the theoretical model equations, we determined the kinetic model that best represented the degradation. Using this model to represent the degradation, the activation energy (Ea and Arhenius frequency factor ln(A for the total reaction were calculated to be 38.245 kJ/mol and 8.124, respectively.

  9. Development and validation of a method for the determination of folic acid in different pharmaceutical formulations using derivative spectrophotometry

    Directory of Open Access Journals (Sweden)

    Marcos Vinícius de Moura Ribeiro

    Full Text Available ABSTRACT Folic acid is a B complex water-soluble vitamin that is essential to humans, and its deficiency can cause problems including congenital malformations in the fetus as well as heart disease. Most countries affected by diseases associated with a lack of folic acid now supplement foods with the vitamin. There is therefore a need for the development of new analytical procedures able to determine folic acid present in different matrices. This work describes the development of zero order and first order derivative spectrophotometric methods for the determination of folic acid in different pharmaceutical formulations, using 0.1 mol L-1 NaOH as solvent. The methods are shown to be simple, selective, and robust. Good linearity was achieved, with correction coefficients ≥0.9996 and limits of detection and quantification ranging from 0.64 to 0.75 and from 1.80 to 2.85 mg L-1, respectively. Recoveries of 98-104% were obtained in accuracy tests, and precision (as RSD was between 0.2 and 4.8%. The methods can be used in routine analyses for quality control purposes, offering an alternative to the procedures already reported in the literature.

  10. Determination of 137Cs and 210Pb using HPGe γ spectrometry as influenced by different sieve diameters

    International Nuclear Information System (INIS)

    Liu Yehan; Yu Hanqing; Geng Xiaochen; Li Yong

    2012-01-01

    Standard sieve diameter is often set as 2.00 mm to determine specific activity of 137 Cs and 210 Pb in soil samples, but it is rarely reported that whether the size of the different screening will affect the accuracy of such determination. In this study, three representative soils were employed to assess the effects of different sieve sizes on measurement of 137 Cs and 210 Pb activity in soil samples by using HPGe γ spectrometer. The targeted soil samples each were screened through the four sieve diameters 2.00, 1.00, 0.50 and 0.25 mm, respectively. It was observed that the sample of 0.25 mm took less time to reach the acceptable value of 137 Cs analysis precision and higher value of the specific activity in the three soils compared to the 2.00 mm sifting sample. As for 210 Pb measurement, the decrease of sieve diameters extended to touch the acceptable value of analysis precision but showed no significant effect on the specific activity. These results played an important role in enhancing the analysis precision of the specific activity of 137 Cs and 210 Pb in soil samples using HPGe γ Spectrometry. (authors)

  11. [Determination of acetanilide herbicide residues in tea by gas chromatography-mass spectrometry with two different ionization techniques].

    Science.gov (United States)

    Shen, Weijian; Xu, Jinzhong; Yang, Wenquan; Shen, Chongyu; Zhao, Zengyun; Ding, Tao; Wu, Bin

    2007-09-01

    An analytical method of solid phase extraction-gas chromatography-mass spectrometry with two different ionization techniques was established for simultaneous determination of 12 acetanilide herbicide residues in tea-leaves. Herbicides were extracted from tea-leaf samples with ethyl acetate. The extract was cleaned-up on an active carbon SPE column connected to a Florisil SPE column. Analytical screening was determined by the technique of gas chromatography (GC)-mass spectrometry (MS) in the selected ion monitoring (SIM) mode with either electron impact ionization (EI) or negative chemical ionization (NCI). It is reliable and stable that the recoveries of all herbicides were in the range from 50% to 110% at three spiked levels, 10 microg/kg, 20 microg/kg and 40 microg/kg, and the relative standard deviations (RSDs) were no more than 10.9%. The two different ionization techniques are complementary as more ion fragmentation information can be obtained from the EI mode while more molecular ion information from the NCI mode. By comparison of the two techniques, the selectivity of NCI-SIM was much better than that of EI-SIM method. The sensitivities of the both techniques were high, the limit of quantitative (LOQ) for each herbicide was no more than 2.0 microg/kg, and the limit of detection (LOD) with NCI-SIM technique was much lower than that of EI-SIM when analyzing herbicides with several halogen atoms in the molecule.

  12. Rapid determination of strontium-90 in environmental samples by single Cerenkov counting using two different colour quench curves

    Energy Technology Data Exchange (ETDEWEB)

    Torres, J.M.; Garcia, J.F.; Llaurado, M.; Rauret, G. [Barcelona Univ. (Spain). Dept. de Quimica Analitica

    1996-11-01

    The validation of the Cerenkov radiation measurement of {sup 90}Y to determine the activity concentration of {sup 90}Sr in environmental samples is described. Liquid-liquid extraction with di-2-ethyhexylphosphoric acid in toluene was used to separate {sup 90}Y from {sup 90}Sr. Optimum conditions for Cerenkov counting (low-level counting option, counting windows, mass of solution to be measured) were established. The need for a counting efficiency correction by using a colour quench curve is stated to be essential, otherwise a significant error may occur. Two different colour quench curves (counting efficiency versus the channel ratio or spectral index parameter) were used and the results were compared. The method was applied to 12 environmental matrices: sea-water, algae, carobs, milk, almonds, hake, honey, shellfish, lamb meat, sardine, pork meat and shore sand. No significant differences were observed on using either of the two colour quench curves for any of these environmental matrices. In order to validate the proposed method, a certified soil reference material (CRM IAEA-375) was used, together with participation in an interlaboratory exercise to determine {sup 90}Sr in a natural water sample. Again, efficiency correction was performed by using either of the two colour quench curves and in both instances the calculated {sup 90}Sr activity concentration was in good agreement with the known values. (Author).

  13. Urban-rural difference in the determinants of dietary and energy intake patterns: A case study in West Java, Indonesia.

    Science.gov (United States)

    Kosaka, Satoko; Suda, Kazuhiro; Gunawan, Budhi; Raksanagara, Ardini; Watanabe, Chiho; Umezaki, Masahiro

    2018-01-01

    Few studies have explored differences in the determinants of individual dietary/energy intake patterns between urban and rural areas. To examine whether the associations between individual characteristics and dietary/energy intake patterns differ between urban and rural areas in West Java, Indonesia. A 3-day weighed food record, interviews, and anthropometric measurements were conducted in Bandung (urban area; n = 85) and Sumedang (rural area; n = 201). Total energy intake and intake from protein, fat, and carbohydrates were calculated. Food items were grouped into dietary categories based on the main ingredients to calculate their share of total energy intake. The associations between individual characteristics and dietary/energy intake were examined by fitting regression models. Models that also included education and body mass index (BMI) were fitted to adult samples only. In Sumedang, the total energy intake and energy intake from carbohydrates, fat, and grain/tubers were significantly associated with age and occupation. In Bandung, energy intake from grain/tubers and vegetables/legumes was related to sex and occupation, while other indicators showed no associations. Among adults, BMI was associated with the total energy intake and educational level was associated with energy intake from vegetables/legumes (both only in Sumedang). The relationship between demographic and socioeconomic factors and dietary/energy intake patterns differs in rural versus urban areas in West Java. These results suggest that different strategies are needed in rural and urban areas to identify and aid populations at risk of diet-related diseases.

  14. Solution Method and Precision Analysis of Double-difference Dynamic Precise Orbit Determination of BeiDou Navigation Satellite System

    Directory of Open Access Journals (Sweden)

    LIU Weiping

    2016-02-01

    Full Text Available To resolve the high relativity between the transverse element of GEO orbit and double-difference ambiguity, the classical double-difference dynamic method is improved and the method, which is to determine precise BeiDou satellite orbit using carrier phase and pseudo-range smoothed by phase, is proposed. The feasibility of the method is discussed and the influence of the method about ambiguity fixing is analyzed. Considering the characteristic of BeiDou, the method, which is to fix double-difference ambiguity of BeiDou satellites by QIF, is derived. The real data analysis shows that the new method, which can reduce the relativity and assure the precision, is better than the classical double-difference dynamic method. The result of ambiguity fixing is well by QIF, but the ambiguity fixing success rate is not high on the whole. So the precision of BeiDou orbit can't be improved clearly after ambiguity fixing.

  15. Considerations on the activity concentration determination method for low-level waste packages and nuclide data comparison between different countries

    International Nuclear Information System (INIS)

    Kashiwagi, M.; Mueller, W.

    2000-01-01

    In low-level waste disposal, acceptable activity concentration limits are regulated for individual nuclides and groups of nuclides according to the conditions of each disposal site. Such regulated limits principally concern total alpha and beta /gamma activity as well as nuclides such as C-14, Ni-63, and Pu-238 which are long-lived and difficult to measure (hereinafter referred to as difficult-to-measure nuclides). Before waste packages are transported to the disposal site, the activities or activity concentrations of the regulated nuclides and groups of nuclides in the waste packages must be assessed and declared. A generally applicable theoretical method to determine these activities is lacking at present. Therefore, to meet this requirement, for NPP waste each country independently samples actual waste and carries out radiochemical analyses on these samples. The activity concentrations of difficult-to-measure nuclides are then determined by statistical correlation of the measured data between difficult-to-measure nuclides and Co-60 and Cs-137 which are measurable from outside the waste packages (hereinafter referred to as key nuclides). This method is called 'Scaling Factor Method'. It is widely adopted as a method for determining the activity concentrations of the limited nuclides in low-level waste packages from NPP, and it is also approved by responsible authorities in the respective country. In the past, each country independently determined scaling factors based on measurements on samples from the local NPPs. In the first part of this study, the possibility of an international scaling factor assessment using a database integrating data from different countries was studied by comparing radiochemical analysis data between Germany, Japan, and the United States. These countries have accumulated a large number of those nuclide data required to determine scaling factors. Statistical values such as correlation coefficients change with an accumulation of data. In

  16. Determination of the optimum design through different funding scenarios for future parabolic trough solar power plant in Algeria

    International Nuclear Information System (INIS)

    Trad, Ameur; Ait Ali, Mohand Ameziane

    2015-01-01

    Highlights: • Seven technical design options have been simulated. • The integration of auxiliary heating and TES stabilize electricity generation. • Impact of TES on the technical and economic performance of PTSPP projects. • Different funding scenarios to assess the profitability of CSP plant. • Sensitivity analysis plays an important role in building energy analysis. - Abstract: The purpose of this study is to determine an optimum design for a projected parabolic trough solar power plant (PTSPP) under Algerian climate through different funding scenarios. In this paper, seven different (d1–d7) designs for PTSPP have been developed for the Naâma site. Plant size, technology type, storage capacity, location of the plant, Operation and Maintenance (O and M) costs, replacement costs, fuel consumption, net CO 2 emission, levelized electricity cost, net power generation, specific investment costs and discount rate are the basis factors to determine the optimum sustainable design for PTSPP. The most attractive designs of each base technology were selected as D1, D2 and D3. The preferable design of three funding scenarios was finally selected on economic, financial and sensitivity analysis. It is finally concluded that, under the most favorable economic conditions allowed in this study, design D3 is the most advantageous in terms of benefit to cost ratio: its power output will be 100 MW el with 8 full load hours thermal energy storage. It was also found that for design D3 under funding scenario S2, the project will require an upfront grant of 396 MEUR. This corresponds to around 56% of the total investment cost and the payback period will be approximately 7 years

  17. Gender differences in suicidal expressions and their determinants among young people in Cambodia, a post-conflict country.

    Science.gov (United States)

    Jegannathan, Bhoomikumar; Kullgren, Gunnar

    2011-03-21

    Suicide among young people is a global public health problem, but adequate information on determinants of suicidal expression is lacking in middle and low income countries. Young people in transitional economies are vulnerable to psychosocial stressors and suicidal expressions. This study explores the suicidal expressions and their determinants among high school students in Cambodia, with specific focus on gender differences. A sample of 320 young people, consisting of 153 boys and 167 girls between 15-18 years of age, was randomly selected from two high schools in Cambodia. Their self-reported suicidal expressions, mental health problems, life-skills dimensions, and exposure to suicidal behavior in others were measured using the Youth Self-Report (YSR), Life-Skills Development Scale (LSDS)-Adolescent Form, and Attitude Towards Suicide (ATTS) questionnaires. Suicidal plans were reported more often by teenage boys than teenage girls (M=17.3%, F=5.6%, p=0.001), whereas girls reported more attempts (M=0.6%, F=7.8%, p=0.012). Young men scored significantly higher on rule-breaking behavior than young women (p=0.001), whereas young women scored higher on anxious/depression (p=0.000), withdrawn/depression (p=0.002), somatic complaints (p=0.034), social problems (p=0.006), and internalizing syndrome (p=0.000). Young men exposed to suicide had significantly higher scores for internalizing syndrome compared to those unexposed (p=0.001), while young women exposed to suicide scored significantly higher on both internalizing (p=0.001) and externalizing syndromes (p=0.012). Any type of exposure to suicidal expressions increased the risk for own suicidal expressions in both genders (OR=2.04, 95% CI=1.06-3.91); among young women, however, those exposed to suicide among friends and partners were at greater risk for the serious suicidal expressions (OR=2.79, 95% CI=1.00-7.74). Life skills dimension scores inversely correlated with externalizing syndrome in young men (p=0.026) and

  18. Gender differences in suicidal expressions and their determinants among young people in Cambodia, a post-conflict country*

    Directory of Open Access Journals (Sweden)

    Kullgren Gunnar

    2011-03-01

    Full Text Available Abstract Background Suicide among young people is a global public health problem, but adequate information on determinants of suicidal expression is lacking in middle and low income countries. Young people in transitional economies are vulnerable to psychosocial stressors and suicidal expressions. This study explores the suicidal expressions and their determinants among high school students in Cambodia, with specific focus on gender differences. Methods A sample of 320 young people, consisting of 153 boys and 167 girls between 15-18 years of age, was randomly selected from two high schools in Cambodia. Their self-reported suicidal expressions, mental health problems, life-skills dimensions, and exposure to suicidal behavior in others were measured using the Youth Self-Report (YSR, Life-Skills Development Scale (LSDS-Adolescent Form, and Attitude Towards Suicide (ATTS questionnaires. Results Suicidal plans were reported more often by teenage boys than teenage girls (M = 17.3%, F = 5.6%, p = 0.001, whereas girls reported more attempts (M = 0.6%, F = 7.8%, p = 0.012. Young men scored significantly higher on rule-breaking behavior than young women (p = 0.001, whereas young women scored higher on anxious/depression (p = 0.000, withdrawn/depression (p = 0.002, somatic complaints (p = 0.034, social problems (p = 0.006, and internalizing syndrome (p = 0.000. Young men exposed to suicide had significantly higher scores for internalizing syndrome compared to those unexposed (p = 0.001, while young women exposed to suicide scored significantly higher on both internalizing (p = 0.001 and externalizing syndromes (p = 0.012. Any type of exposure to suicidal expressions increased the risk for own suicidal expressions in both genders (OR = 2.04, 95% CI = 1.06-3.91; among young women, however, those exposed to suicide among friends and partners were at greater risk for the serious suicidal expressions (OR = 2.79, 95% CI = 1.00-7.74. Life skills dimension scores

  19. Comparative Study of Different Methods to Determine the Role of Reactive Oxygen Species Induced by Zinc Oxide Nanoparticles

    Directory of Open Access Journals (Sweden)

    Nigar A. Najim

    2016-08-01

    Full Text Available Accumulation of reactive oxygen species (ROS followed by an increase in oxidative stress is associated with cellular responses to nanoparticle induced cell damages. Finding the best method for assessing intracellular ROS production is the key step in the detection of oxidative stress induced injury. This study evaluates and compares four different methods for the measurement of intracellular ROS generation using fluorogenic probe, 2´,7´-dichlorofluorescein diacetate (DCFH-DA. Hydrogen peroxide (H2O2 was utilised as a positive control to assess the reactivity of the probe. Spherically shaped zinc oxide (ZnO nanoparticles with an average particle size of 85.7 nm were used to determine the diverse roles of ROS in nanotoxicity in Hs888Lu and U937 cell lines. The results showed that different methods exhibit different patterns of ROS measurement. In conclusion this study found that the time point at which the DCFH-DA is added to the reaction, the incubation time and the oxidative species that is responsible for the oxidation of DCFH, have impact on the intracellular ROS measurement.

  20. Spectral difference method applied in determination of beta-carotene, chlorophyll a and b from irradiated seeds of Calendula Officinalis

    International Nuclear Information System (INIS)

    Cucu, Delia-Irina; Dorobantu, Ioan

    2002-01-01

    Beta-carotene is part of the class of the carotenoid pigments that have a special function in the pigmentation of flowers and fruits. These pigments are essential in photosynthesis where they are retaining energy and are photoprotectors by forming the redox system. They are also precursors of vitamin A, pigments involved in the process of seeing. Beta-carotene is responsible for the growth and development of organisms, for the protection and recovery of epithelial tissue, etc. Next to chlorophyll, carotenoids are the major components of the complex pigment-protein from the thylacoide membrane, and some of them, such as beta-carotene, were for a long time considered to be protecting the membrane against destructive events caused by the over excitement of the chlorophyll. This paper presents spectral difference method for physico-chemical characterisation of three components (beta-carotene, chlorophyll a and b) from Calendula officinalis leaves and stalks, after irradiation of germinated seeds. The germinated seeds of Calendula officinalis has been irradiated at 8 different doses ( 1 k Rad, 3 k Rad, 5 k Rad, 10 k Rad, 20 k Rad, 50 k Rad, 100 k Rad, 500 krad), one set of seeds remaining unirradiated for comparison. The plants had been grown in the same conditions of light, temperature and humidity. The identification of beta-carotene was performed through thin layer chromatography. The chemical concentrations of beta-carotene, chlorophyll a and b were determined by spectral difference method. (authors)

  1. Radiosensitivity of different human tumor cells lines grown as multicellular spheroids determined from growth curves and survival data

    International Nuclear Information System (INIS)

    Schwachoefer, J.H.C.; Crooijmans, R.P.; van Gasteren, J.J.; Hoogenhout, J.; Jerusalem, C.R.; Kal, H.B.; Theeuwes, A.G.

    1989-01-01

    Five human tumor cell lines were grown as multicellular tumor spheroids (MTS) to determine whether multicellular tumor spheroids derived from different types of tumors would show tumor-type dependent differences in response to single-dose irradiation, and whether these differences paralleled clinical behavior. Multicellular tumor spheroids of two neuroblastoma, one lung adenocarcinoma, one melanoma, and a squamous cell carcinoma of the oral tongue, were studied in terms of growth delay, calculated cell survival, and spheroid control dose50 (SCD50). Growth delay and cell survival analysis for the tumor cell lines showed sensitivities that correlated well with clinical behavior of the tumor types of origin. Similar to other studies on melanoma multicellular tumor spheroids our spheroid control dose50 results for the melanoma cell line deviated from the general pattern of sensitivity. This might be due to the location of surviving cells, which prohibits proliferation of surviving cells and hence growth of melanoma multicellular tumor spheroids. This study demonstrates that radiosensitivity of human tumor cell lines can be evaluated in terms of growth delay, calculated cell survival, and spheroid control dose50 when grown as multicellular tumor spheroids. The sensitivity established from these evaluations parallels clinical behavior, thus offering a unique tool for the in vitro analysis of human tumor radiosensitivity

  2. Consequences of using different soil texture determination methodologies for soil physical quality and unsaturated zone time lag estimates.

    Science.gov (United States)

    Fenton, O; Vero, S; Ibrahim, T G; Murphy, P N C; Sherriff, S C; Ó hUallacháin, D

    2015-11-01

    Elucidation of when the loss of pollutants, below the rooting zone in agricultural landscapes, affects water quality is important when assessing the efficacy of mitigation measures. Investigation of this inherent time lag (t(T)) is divided into unsaturated (t(u)) and saturated (t(s)) components. The duration of these components relative to each other differs depending on soil characteristics and the landscape position. The present field study focuses on tu estimation in a scenario where the saturated zone is likely to constitute a higher proportion of t(T). In such instances, or where only initial breakthrough (IBT) or centre of mass (COM) is of interest, utilisation of site and depth specific "simple" textural class or actual sand-silt-clay percentages to generate soil water characteristic curves with associated soil hydraulic parameters is acceptable. With the same data it is also possible to estimate a soil physical quality (S) parameter for each soil layer which can be used to infer many other physical, chemical and biological quality indicators. In this study, hand texturing in the field was used to determine textural classes of a soil profile. Laboratory methods, including hydrometer, pipette and laser diffraction methods were used to determine actual sand-silt-clay percentages of sections of the same soil profile. Results showed that in terms of S, hand texturing resulted in a lower index value (inferring a degraded soil) than that of pipette, hydrometer and laser equivalents. There was no difference between S index values determined using the pipette, hydrometer and laser diffraction methods. The difference between the three laboratory methods on both the IBT and COM stages of t(u) were negligible, and in this instance were unlikely to affect either groundwater monitoring decisions, or to be of consequence from a policy perspective. When t(u) estimates are made over the full depth of the vadose zone, which may extend to several metres, errors resulting from

  3. Consequences of using different soil texture determination methodologies for soil physical quality and unsaturated zone time lag estimates

    Science.gov (United States)

    Fenton, O.; Vero, S.; Ibrahim, T. G.; Murphy, P. N. C.; Sherriff, S. C.; Ó hUallacháin, D.

    2015-11-01

    Elucidation of when the loss of pollutants, below the rooting zone in agricultural landscapes, affects water quality is important when assessing the efficacy of mitigation measures. Investigation of this inherent time lag (tT) is divided into unsaturated (tu) and saturated (ts) components. The duration of these components relative to each other differs depending on soil characteristics and the landscape position. The present field study focuses on tu estimation in a scenario where the saturated zone is likely to constitute a higher proportion of tT. In such instances, or where only initial breakthrough (IBT) or centre of mass (COM) is of interest, utilisation of site and depth specific "simple" textural class or actual sand-silt-clay percentages to generate soil water characteristic curves with associated soil hydraulic parameters is acceptable. With the same data it is also possible to estimate a soil physical quality (S) parameter for each soil layer which can be used to infer many other physical, chemical and biological quality indicators. In this study, hand texturing in the field was used to determine textural classes of a soil profile. Laboratory methods, including hydrometer, pipette and laser diffraction methods were used to determine actual sand-silt-clay percentages of sections of the same soil profile. Results showed that in terms of S, hand texturing resulted in a lower index value (inferring a degraded soil) than that of pipette, hydrometer and laser equivalents. There was no difference between S index values determined using the pipette, hydrometer and laser diffraction methods. The difference between the three laboratory methods on both the IBT and COM stages of tu were negligible, and in this instance were unlikely to affect either groundwater monitoring decisions, or to be of consequence from a policy perspective. When tu estimates are made over the full depth of the vadose zone, which may extend to several metres, errors resulting from the use of

  4. Characterization of Some Real Mixed Plastics from WEEE: A Focus on Chlorine and Bromine Determination by Different Analytical Methods

    Directory of Open Access Journals (Sweden)

    Beatrice Beccagutti

    2016-10-01

    Full Text Available Bromine and chlorine are almost ubiquitous in waste of electrical and electronic equipment (WEEE and the knowledge of their content in the plastic fraction is an essential step for proper end of life management. The aim of this study is to compare the following analytical methods: energy dispersive X-ray fluorescence spectroscopy (ED-XRF, ion chromatography (IC, ion-selective electrodes (ISEs, and elemental analysis for the quantitative determination of chlorine and bromine in four real samples taken from different WEEE treatment plants, identifying the best analytical technique for waste management workers. Home-made plastic standard materials with known concentrations of chlorine or bromine have been used for calibration of ED-XRF and to test the techniques before the sample analysis. Results showed that IC and ISEs, based upon dissolution of the products of the sample combustion, have not always achieved a quantitative absorption of the analytes in the basic solutions and that bromine could be underestimated since several oxidation states occur after combustion. Elemental analysis designed for chlorine determination is subjected to strong interference from bromine and required frequent regeneration and recalibration of the measurement cell. The most reliable method seemed to be the non-destructive ED-XRF. Calibration with home-made standards, having a similar plastic matrix of the samples, enabled us to carry out quantitative determinations, which have been revealed to be satisfactorily accurate and precise. In all the analyzed samples a total concentration of chlorine and/or bromine between 0.6 and 4 w/w% was detected, compromising the feasibility of a mechanical recycling and suggesting the exploration of an alternative route for managing these plastic wastes.

  5. Determination of piroxicam in pharmaceutical preparations by ultraviolet direct spectrophotometry, ultraviolet difference spectrophotometry and high performance liquid chromatography

    Energy Technology Data Exchange (ETDEWEB)

    Hackmann, E.R.M.; Santos Gianotto, E.A. dos; Miritello Santoro, M.I.R. (Universidade de Sao Paulo (Brazil))

    1993-02-01

    Piroxicam in pharmaceutical preparations (capsules (C), tablets (T), oral drops (OD), suppositories (S) and simulated sample (SS)) was determined by UV direct spectrophotometry (UVS) at 333 nm, by UV difference spectrophotometry (UVDS) at 327 nm, and in C and T, by high performance liquid chromatography (HPLC). For UVS, Beer's law was obeyed in the range 3.0-8.5 [mu]g/mL. The coefficient of correlation (CC), absolute precision (AP) and relative precision (RP) were 0.9999, 0.02 and 0.33%, respectively. The coefficient of variation (CV) for C, T, OD, S and SS were 0.48%, 0.35%, 0.48% and 0.19%, respectively. The recovery average (RA) was 100.22%. For UVDS, Beer's law was obeyed in the range 5.0-15.0 [mu]g/mL. The CC, AP and RP were respectively 0.9999, 0.05 and 0.47%. The CV for C, T, OD, S and SS were 0.64%, 0.84%, 0.62%, 0.54% and 0.15%, respectively. The RA was 99.02%. In HPLC determination, a LiChrospher[reg sign] 100 RP-18 (5 [mu]m) in LiChroCART[reg sign] 125-4 column at ambient temperature with a mobile phase consisting of methanol: (buffer solution citric acid-dibasic sodium phosphate pH 3.0) (55:45) and UV detection at 254 nm enabled the determination of piroxicam in C and T. The response peak area versus concentration presented linearity in the range 10.0-100.0 [mu]g/mL. The CC, AP and RP were 0.9997, 0.45 and 0.90%, respectively. The CV was 0.51%-0.82% and the RA, 97.13%. 14 refs., 1 fig., 5 tabs.

  6. Extraction Efficiency of Different Solvents and LC-UV Determination of Biogenic Amines in Tea Leaves and Infusions

    Directory of Open Access Journals (Sweden)

    U. Gianfranco Spizzirri

    2016-01-01

    Full Text Available Biogenic amines (BAs, that is, spermine, spermidine, putrescine, histamine, tyramine, β-phenylethylamine, cadaverine, and serotonin, have been determined in several samples of tea leaves, tea infusions, and tea drinks by LC-UV method after derivatization with dansyl chloride. Different extraction solvents have been tested and TCA 5% showed better analytical performances in terms of linearity, recovery percentages, LOD, LOQ, and repeatability than HCl 0.1 M and HClO4 0.1 M and was finally exploited for the quantitative determination of BAs in all samples. In tea leaves total BAs concentration ranged from 2.23 μg g−1 to 11.24 μg g−1 and PUT (1.05–2.25 μg g−1 and SPD (1.01–1.95 μg g−1 were always present, while SER (nd–1.56 μg g−1, HIS (nd–2.44 μg g−1, and SPM (nd–1.64 μg g−1 were detected more rarely. CAD and PHE were determined in few samples at much lower concentrations while none of the samples contained TYR. Tea infusions showed the same trend with total BAs concentrations never exceeding 80.7 μg L−1. Black teas showed higher amounts of BAs than green teas and organic and decaffeinated samples always contained much lower BAs levels than their conventional counterparts.

  7. The social determinants of health: a contribution to the analysis of gender differences in health and illness.

    Science.gov (United States)

    Ballantyne, P J

    1999-12-01

    While it is established that socioeconomic status and social integration influence the distribution of health and illness among men and women, little attention has been paid to the different ways in which women and men experience socioeconomic opportunities and social attachments to others. Drawing on evidence from the literature, the position developed in this article is that gender mediates the influence of both socioeconomic status and social integration on health, and for women, these are intricately linked. Women's relationship to the labour market establishes and perpetuates their socioeconomic inequality relative to men, and may produce contradictory influences on women's health. Furthermore, for women, the marital relationship is paradoxical: marriage may at once improve economic and social support opportunities, while diminishing control over paid and unpaid work--potentially increasing as well as compromising the health status of women. The article is intended to contribute to the growing body of literature on gender and the determinants of health.

  8. Breast Cancer Surgery: Comparing Surgical Groups and Determining Individual Differences in Postoperative Sexuality and Body Change Stress

    Science.gov (United States)

    Yurek, Debora; Farrar, William; Andersen, Barbara L.

    2007-01-01

    Women diagnosed and surgically treated for regional breast cancer (N = 190) were studied to determine the sexual and body change sequelae for women receiving modified radical mastectomy (MRM) with breast reconstruction in comparison with the sequelae for women receiving breast-conserving therapy (BCT) or MRM without breast reconstruction. The sexuality pattern for women receiving reconstructive surgery was one that was significantly different—with lower rates of activity and fewer signs of sexual responsiveness—than that for women in either of the other groups. Significantly higher levels of traumatic stress and situational distress regarding the breast changes were reported by the women receiving an MRM in contrast to the women treated with BCT. Using a model to predict sexual morbidity, regression analyses revealed that individual differences in sexual self-schema were related to both sexual and body change stress outcomes. PMID:10965644

  9. Determination Of Uranium Concentration In Teeth Female Samples Using Fission Tracks In CR-39 From Different Countries

    International Nuclear Information System (INIS)

    Hummadi, S.S

    2010-01-01

    The present study was under taken to measure the uranium concentration in female teeth samples collected from different nationalities.The determination of uranium concentration in these samples has been done by using CR-39 track detector.The nuclear reaction is used as a source of nuclear fission fragments is (n, f) obtained by the bombardment of U-235 with thermal neutrons with flux (5*10 3 n/cm 2 .s) was used from (Am-Be) neutron source.The obtained results show the concentration is ranging from (0.58±0.7ppm) in Oman and Uae to (0.35±0.03ppm)in Iraqi for male, the uranium concentration was the highest in Oman and Uae for female

  10. [The differences in speciality preferences and career determinant factors between first- and fifth-year medical school students].

    Science.gov (United States)

    Uemoto, Asuka; Kawamoto, Ryuichi; Abe, Masanori; Kusunoki, Tomo; Kohara, Katsuhiko; Miki, Tetsuro

    2015-01-01

    In Japan, the imbalance in the medical workforce has caused a deterioration of rural medicine. We explored the differences in speciality preferences and career determinant factors among students to identify keys to increase the recruitment of physicians to rural areas. We conducted a survey of first- and fifth-year medical students, using a questionnaire enquiring about their specialty preference and career determinant factors. The data were analyzed with a chi-square test. A higher percentage of first-year students preferred to be basic medicine scientists, while fifth-year students considered internal medicine subspecialities, obstetrics and gynecology, anesthesia, and ophthalmology to be the most desirable. The factor analysis yielded five factors responsible for these findings; high social approval of the specialty, working hours, income, advice from senior classmates and doctors, and the work environment. The percentage of students who considered rural practice as a choice for thier future plan and had an awareness of the collapse of rural medicine was lower in the fifth-year students than in the first-year students. To increase the medical work force in provincial areas, it is necessary to strengthen not only the medical system with regard to general medicine, but also to offer better medical education in rural areas. More information about rural practice should therefore be transmitted to medical students.

  11. [HPLC-ELSD for determining contents of three triterpenoidal saponins in fruits of Buddleja lindleyana from different habitats].

    Science.gov (United States)

    Wu, Pei-Yun; Ren, Ya-Shuo; Wu, De-Ling; Qiao, Jin-Wei

    2016-04-01

    To establish an HPLC-ELSD method for the quantification of triterpenoids in the fruits of Buddleja lindleyana. The RP-HPLC-ELSD method was used for the determination of triterpenoids in B. lindleyana fruits, which were collected from different habitats. The column used was a packed with 5 μm stationary phase Waters SunFireTM C₁₈ (4.6 mm×150 mm, 5 μm). The mobile phase consisted of Methanol-water(82∶18) at a flow rate of 1 mL•min⁻¹. Column temperature: 30 ℃. ELSD conditions: drift tube temperature: 106 ℃; carrier gas (nitrogen) flow rate: 1.5 L•min⁻¹; amplification factor: 1. The calibration curves showed good linear relationship on a range from 0.702 to 28.08 μg(r=0.999 2) for Clinoposaponin III, 0.390 to 15.60 μg(r=0.998 9) for Desrhamnoverbascosaponin and 0.192 to 7.68μg(r=0.999 0) for Mimengoside I. The average recovery rate(n=6) were 99.41%, 99.08% and 98.67% and it's RSD were 0.86%, 1.56% and 1.80%. This method can be used to determine the contents of triterpenoids in the fruits of Buddleja lindleyana for its simplicity, accurateness and reliability. Copyright© by the Chinese Pharmaceutical Association.

  12. Optimization of Extraction Conditions and HPTLC - UV Method for Determination of Quinine in Different Extracts of Cinchona species Bark

    Directory of Open Access Journals (Sweden)

    Dharam C. Jain

    2008-10-01

    Full Text Available A simple, precise and accurate high-performance thin-layer chromatographic method has been established for quantitative determination of quinine. Conditions were also optimized for best possible extraction of quinine via varying concentrations of diethyl amine in different solvents (n-hexane, chloroform, ethyl acetate and methanol for maximum recovery of quinine. Methanol modified with 20 % DEA found to be best for highest possible recovery of target analyte quinine. Chromatographic separation of quinine was performed on silica gel 60 F 254 HPTLC plates with ethyl acetate : diethyl amine in the proportion 88 : 12 (v/v, as mobile phase. The determination was carried out using the densitometric absorbance mode at 236 nm. Quinine response was found to be linear over the range 4–24 μg spot −1. The HPTLC method was evaluated in terms of specificity, precision, reproducibility, LOD – LOQ and robustness. Beside these parameters, number of theoretical plates and flow constant were also included as a part of validation

  13. Environment and geographic distance differ in relative importance for determining fungal community of rhizosphere and bulk soil.

    Science.gov (United States)

    Zhang, Kaoping; Adams, Jonathan M; Shi, Yu; Yang, Teng; Sun, Ruibo; He, Dan; Ni, Yingying; Chu, Haiyan

    2017-09-01

    Rhizospheric fungi play major roles in both natural and agricultural ecosystems. However, little is known about the determinants of their diversity and biogeographic patterns. Here, we compared fungal communities in rhizosphere and bulk soils of wheat fields in the North China Plain. The rhizosphere had a lower fungal diversity (observed OTUs and Chao1) than bulk soil, and a distinct fungal community structure in rhizosphere compared with bulk soil. The relative importance of environmental factors and geographic distance for fungal distribution differed between rhizosphere and bulk soil. Environmental factors were the primary cause of variations in total fungal community and major fungal phyla in bulk soil. By contrast, fungal communities in soils loosely attached to roots were predictable from both environmental factors and influences of geographic distance. Communities in soils tightly attached to roots were mainly determined by geographic distance. Our results suggest that both contemporary environment processes (present-day abiotic and biotic environment characters) and historical processes (spatial isolation, dispersal limitation occurred in the past) dominate variations of fungal communities in wheat fields, but their relative importance of all these processes depends on the proximity of fungal community to the plant roots. © 2017 Society for Applied Microbiology and John Wiley & Sons Ltd.

  14. Rapid and simple micromethod for the simultaneous determination of 3-MCPD and 3-MCPD esters in different foodstuffs.

    Science.gov (United States)

    Küsters, Markus; Bimber, Ute; Ossenbrüggen, Alexandra; Reeser, Sebastian; Gallitzendörfer, Rainer; Gerhartz, Michael

    2010-06-09

    This paper describes for the first time a micromethod for the simultaneous determination of 3-monochloropropane-1,2-diol (3-MCPD) and fatty acid esters of 3-MCPD (3-MCPD esters) in different foodstuffs. 3-MCPD and 3-MCPD esters were isolated from food products using a single extraction step separating hydrophilic and lipophilic compounds. An aliquot of the aqueous layer was analyzed for the content of 3-MCPD while a part of the organic layer was analyzed for 3-MCPD esters after cleavage with sodium methoxide. After a simple derivatization procedure with phenylboronic acid (PBA), the determination was achieved by isotope dilution GC-MS using isotope-labeled 3-MCPD and 3-MCPD ester as internal standards. The method was validated for various foodstuffs like bakery products, meat and fish products, and soups as well as seasonings with LOD of 1-2 microg/kg (3-MCPD) and 6 microg/kg (3-MCPD esters), respectively. Recoveries ranged within 95 +/- 9% and 96 +/- 10% at spiking levels of 15 and 25 microg/kg in all matrices for 3-MCPD and 84 +/- 9% and 85 +/- 7% at spiking levels of 0.05 mg/kg and 2 mg/kg for 3-MCPD esters. The method avoids tedious and laborious sample preparation and was successfully applied to the rapid screening of samples conforming to the EU performance criteria for methods of analysis for 3-MCPD.

  15. Prevalence and determinants of metabolic syndrome among newly diagnosed type 2 diabetic subjects according to different criteria.

    Science.gov (United States)

    Hossain, Sharmin; Fatema, Kaniz; Ahmed, Kazi R; Akter, Jesmin; Chowdhury, Hasina A; Shahjahan, Md; Acharyya, Amitava; Rahim, M A; Ali, Liaquat

    2015-01-01

    Metabolic syndrome (MS) is becoming a serious global public health problem. The prevalence of MS differs in different population by using different definitions. Present study aimed to find out the prevalence and determinants of MS among newly diagnosed type 2 diabetes (NDT2D) according to different criteria. This cross-sectional analytic study was conducted among 281 subjects selected purposively from the OPD of BIRDEM. Information on lifestyle factors and disease history were collected using a semi-structured questionnaire by face to face interview. The three definitions of MS used in this study are from the International Diabetes Federation (IDF), a modified version of the ATP III criteria for Asian populations (modified ATP III) and World Health Organization (WHO) criteria. Adjusted odds ratio and confidence limit were generated through logistic regression. The overall prevalence of metabolic syndrome among the study subjects according to modified ATPIII, WHO and IDF criteria were 79% (95% CI: 74.2-83.8), 81% (95% CI: 76.4-85.6) and 68% (95% CI: 62.6-73.5) respectively. The prevalence of metabolic syndrome among female were higher compared to males in all the criteria's. Female gender (OR=5.93), family history of diabetes (OR=1.92), overweight (OR=6.2), and obesity (OR=5.13) were found as important confounders associated with metabolic syndrome. The prevalence of the metabolic syndrome among NDT2D is considerably higher in our population which may indicate considerable risk of cardiovascular diseases in future. Female gender, family history of diabetes, overweight and obesity are important confounders of MS in this population. Copyright © 2014 Diabetes India. Published by Elsevier Ltd. All rights reserved.

  16. Different growth strategies determine the carbon gain and productivity of aspen collectives to be used in short-rotation plantations

    International Nuclear Information System (INIS)

    Müller, Annika; Horna, Viviana; Zhang, Chunxia; Leuschner, Christoph

    2012-01-01

    Populus tremula is a favoured tree species in short-rotation forestry with a recognised large intraspecific variation in productivity. We compared the growth potential of 1-yr-old saplings of four Central European aspen collectives with different climate adaptation on a low-fertility site and searched for growth-determining physiological and morphological traits and their dependence on genetic constitution. Among the 35 investigated traits were photosynthetic capacity and mean assimilation rate, quantum yield and carboxylation efficiency, leaf water potential, leaf phaenology and the ratio of leaves lost to leaves produced (LP ratio), leaf size and total leaf area, axes length growth and canopy carbon gain as an estimate of productivity. The collectives differed by more than 30% in cumulative carbon gain with a large genotype effect, while mean assimilation rate and most photosynthetic and water status traits showed a relatively small intraspecific variation with no significant influence on the variation in C gain. The timing of the beginning of net leaf loss (leaf abscission > leaf production) in August differed between the four collectives and resulted in different maximum leaf areas and LP ratios, which were identified as key factors controlling C gain. Mean assimilation rate, though not related to cumulative C gain, was positively correlated with the light, CO 2 and water use efficiencies of photosynthesis. We conclude that genotype selection for high-yielding aspen in short-rotation forestry at low-fertility sites should focus on the parameters leaf phaenology, LP ratio at the end of the growing season, and the resulting total leaf area as key traits.

  17. Anaemia, its determinants and effect of different interventions amongst tea tribe adolescent girls living in Dibrugarh district of Assam

    Directory of Open Access Journals (Sweden)

    Tulika Goswami Mahanta

    2014-12-01

    Full Text Available Background: Nutritional anaemia, one of the major public health problems in India is associated with lower productivity, higher sickness rate and absenteeism having inter-generational effect. Morbidity during adolescent has implication on future safe motherhood, optimum growth and development of foetus and children. Aims and Objective: To assess, prevalence and determinants of anaemia and effect of different interventions amongst tea tribe adolescent girls. Materials & Methods: A community based intervention study was conducted covering 16 tea estates of Dibrugarh District, Assam. Variables includes socio-demographic, environmental, anthropometry, history of present and past illness, clinical examination and laboratory investigation including haemoglobin, serum ferritin, haemoglobin typing and routine stool examination. Interventions given were weekly IFA supplementation, dietary diversification, health promotion by monthly NHED, cooking demonstration, cooking competition and kitchen garden promotion and counselling to improve IFA compliance and remove barriers was done. SPSS and EpiInfo software, used to calculate of rates, ratios, chi-square test, Fisher Exact test and multiple logistic regression analysis. Results: Enrolments were 802, with mean age, 14.8 years. Anaemia prevalence was 96.3% with median serum ferritin, 22.9 ng/ml. Prevalence of Sickle cell anaemia was,12% and helminthiasis 84.20%.  History of passage of worms (9.1%, night blindness (5.6%, weakness (62.1%, loss of appetite (37.5%, gum bleeding (23.6%, loose motion (13%, loss of weight (9.9%, menstrual problem (19.3% was common. Following intervention mean haemoglobin difference was 1.48 gm/dl with 13.5% difference in prevalence. Associated morbidities showed significant reduction following active intervention. Conclusions: High anaemia prevalence requires urgent attention to avoid preventable morbidities. Implementation of different intervention in an integrated manner

  18. Anaemia, its determinants and effect of different interventions amongst tea tribe adolescent girls living in Dibrugarh district of Assam

    Directory of Open Access Journals (Sweden)

    Tulika Goswami Mahanta

    2014-12-01

    Full Text Available Background: Nutritional anaemia, one of the major public health problems in India is associated with lower productivity, higher sickness rate and absenteeism having inter-generational effect. Morbidity during adolescent has implication on future safe motherhood, optimum growth and development of foetus and children. Aims and Objective: To assess, prevalence and determinants of anaemia and effect of different interventions amongst tea tribe adolescent girls. Materials & Methods: A community based intervention study was conducted covering 16 tea estates of Dibrugarh District, Assam. Variables includes socio-demographic, environmental, anthropometry, history of present and past illness, clinical examination and laboratory investigation including haemoglobin, serum ferritin, haemoglobin typing and routine stool examination. Interventions given were weekly IFA supplementation, dietary diversification, health promotion by monthly NHED, cooking demonstration, cooking competition and kitchen garden promotion and counselling to improve IFA compliance and remove barriers was done. SPSS and EpiInfo software, used to calculate of rates, ratios, chi-square test, Fisher Exact test and multiple logistic regression analysis. Results: Enrolments were 802, with mean age, 14.8 years. Anaemia prevalence was 96.3% with median serum ferritin, 22.9 ng/ml. Prevalence of Sickle cell anaemia was,12% and helminthiasis 84.20%.  History of passage of worms (9.1%, night blindness (5.6%, weakness (62.1%, loss of appetite (37.5%, gum bleeding (23.6%, loose motion (13%, loss of weight (9.9%, menstrual problem (19.3% was common. Following intervention mean haemoglobin difference was 1.48 gm/dl with 13.5% difference in prevalence. Associated morbidities showed significant reduction following active intervention. Conclusions: High anaemia prevalence requires urgent attention to avoid preventable morbidities. Implementation of different intervention in an integrated manner was

  19. The structural determinants responsible for c-Fos protein proteasomal degradation differ according to the conditions of expression.

    Science.gov (United States)

    Ferrara, Patrizia; Andermarcher, Elisabetta; Bossis, Guillaume; Acquaviva, Claire; Brockly, Frédérique; Jariel-Encontre, Isabelle; Piechaczyk, Marc

    2003-03-13

    c-fos gene is expressed constitutively in a number of tissues as well as in certain tumor cells and is inducible, in general rapidly and transiently, in virtually all other cell types by a variety of stimuli. Its protein product, c-Fos, is a short-lived transcription factor that heterodimerizes with various protein partners within the AP-1 transcription complex via leucine zipper/leucine zipper interactions for binding to specific DNA sequences. It is mostly, if not exclusively, degraded by the proteasome. To localize the determinant(s) responsible for its instability, we have conducted a genetic analysis in which the half-lives of c-Fos mutants and chimeras made with the stable EGFP reporter protein were compared under two experimental conditions taken as example of continous and inducible expression. Those were constitutive expression in asynchronously growing Balb/C 3T3 mouse embryo fibroblasts and transient induction in the same cells undergoing the G0/G1 phase transition upon stimulation by serum. Our work shows that c-Fos is degraded faster in synchronous- than in asynchronous cells. This difference in turnover is primarily accounted for by several mechanisms. First, in asynchronous cells, a unique C-terminal destabilizer is active whereas, in serum-stimulated cells two destabilizers located at both extremities of the protein are functional. Second, heterodimerization and/or binding to DNA accelerates protein degradation only during the G0/G1 phase transition. Adding another level of complexity to turnover control, phosphorylation at serines 362 and 374, which are c-Fos phosphorylation sites largely modified during the G0/G1 phase transition, stabilizes c-Fos much more efficiently in asynchronous than in serum-stimulated cells. In both cases, the reduced degradation rate is due to inhibition of the activity of the C-terminal destabilizer. However, in serum-stimulated cells, this effect is partially masked by the activation of the N-terminal destabilizer and

  20. Spectrophotometric and spectrofluorimetric methods for determination of certain biologically active phenolic drugs in their bulk powders and different pharmaceutical formulations

    Science.gov (United States)

    Omar, Mahmoud A.; Badr El-Din, Kalid M.; Salem, Hesham; Abdelmageed, Osama H.

    2018-03-01

    Two simple and sensitive spectrophotometric and spectrofluorimetric methods for the determination of terbutaline sulfate, fenoterol hydrobromide, etilefrine hydrochloride, isoxsuprine hydrochloride, ethamsylate, doxycycline hyclate have been developed. Both methods were based on the oxidation of the cited drugs with cerium (IV) in acid medium. The spectrophotometric method was based on measurement of the absorbance difference (ΔA), which represents the excess cerium (IV), at 317 nm for each drug. On the other hand, the spectrofluorimetric method was based on measurement of the fluorescent of the produced cerium (III) at emission wavelength 354 nm (λexcitation = 255 nm) for the concentrations studied for each drug. For both methods, the variables affecting the reactions were carefully investigated and the conditions were optimized. Linear relationships were found between either ΔA or the fluorescent of the produced cerium (III) values and the concentration of the studied drugs in a general concentration range of 2.0-24.0 μg mL- 1, 20.0-24.0 ng mL- 1 with good correlation coefficients in the following range 0.9990-0.9999, 0.9990-0.9993 for spectrophotometric and spectrofluorimetric methods respectively. The limits of detection and quantitation of spectrophotometric method were found in general concentration range 0.190-0.787 and 0.634-2.624 μg mL- 1respectively. For spectrofluorimetric method, the limits of detection and quantitation were found in general concentration range 4.77-9.52 and 15.91-31.74 ng mL- 1 respectively. The stoichiometry of the reaction was determined, and the reactions pathways were postulated. The analytical performance of the methods, in terms of accuracy and precision, were statistically validated and the results obtained were satisfactory. The methods have been successfully applied to the determination of the cited drugs in their commercial pharmaceutical formulations. Statistical comparison of the results with the reference methods