WorldWideScience

Sample records for idl matlab grads

  1. MATLAB - Introduction

    International Nuclear Information System (INIS)

    Jung, Heon Seul

    2005-08-01

    This book introduces MATLAB giving descriptions of analysis and design of this control system like what is control? cases of control system, working environment of MATLAB, signs of MATLAB, commands of MATLAB, and drawing graphs. It also tells of basic use of simulink, mathematical model of physical system like mechanical-electrical analogous system, system analysis in time part, frequency analysis, state space and design such as canonical from and principle of duality and state observer design.

  2. MATLAB syntaksen

    DEFF Research Database (Denmark)

    Skajaa, Anders; Jørgensen, Jakob Heide

    MATLAB er et matematik-program som fokuserer på anvendelsen af matricer og vektorer. Deraf navnet MATrix LABoratory. Denne bog er en praktisk vejledning i at forstår og anvende MATLAB syntaksen og fungerer som en hurtig genvej til dig, der skal i gang med at anvende MATLAB i forbindelse med fx dit...

  3. Idling Reduction for Personal Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-05-07

    Fact sheet on reducing engine idling in personal vehicles. Idling your vehicle--running your engine when you're not driving it--truly gets you nowhere. Idling reduces your vehicle's fuel economy, costs you money, and creates pollution. Idling for more than 10 seconds uses more fuel and produces more emissions that contribute to smog and climate change than stopping and restarting your engine does.

  4. Idling is Not the Way to Go

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-06-01

    Researchers estimate that idling from heavy-duty and light-duty vehicles combined wastes about 6 billion gallons of fuel annually. Many states have put restrictions on idling, especially in metropolitan areas. Clearly, idling is not the way to go.

  5. Matlab for dummies

    CERN Document Server

    Sizemore, Jim

    2014-01-01

    Plot graphs, solve equations, and write code in a flash! If you work in a STEM field, chances are you'll be using MATLAB on a daily basis. MATLAB is a popular and powerful computational tool and this book provides everything you need to start manipulating and plotting your data. MATLAB has rapidly become the premier data tool, and MATLAB For Dummies is a comprehensive guide to the fundamentals. MATLAB For Dummies guides you through this complex computational language from installation to visualization to automation.Learn MATLAB's language fundamentals including syntax, operators, and data type

  6. Bibliographie des oeuvres du prof. Anton Grad

    Directory of Open Access Journals (Sweden)

    Anton Grad

    2015-10-01

    Full Text Available La mort d'Anton Gr'ad a privé Linguistica d'un infatigable collabdrateur et aussi d'un de ses directeurs les plus remarquables. Sa collaboration à la revue commence dès le premier volume en 1955 -avec l' étude sur l'ordre des mots en ancien et moyen français et celle sur l'emploi des verbes vicaires faire et do en français et en anglais et se poursu'it jusqu' au vingtdeuxième votume. Ce dernier volume où il étudie l'étymolodie de l'oronyme slovène Nanos a été déposé sur son bureau de travail quelques jo~rs avant sa mdrt, survenue le 27 mars 1983.

  7. 48 CFR 31.205-17 - Idle facilities and idle capacity costs.

    Science.gov (United States)

    2010-10-01

    ... workload; or (2) Were necessary when acquired and are now idle because of changes in requirements..., or sale, in accordance with sound business, economics, or security practices. Widespread idle...

  8. Matlab for engineers explained

    CERN Document Server

    Gustafsson, Fredrik

    2003-01-01

    This book is written for students at bachelor and master programs and has four different purposes, which split the book into four parts: 1. To teach first or early year undergraduate engineering students basic knowledge in technical computations and programming using MATLAB. The first part starts from first principles and is therefore well suited both for readers with prior exposure to MATLAB but lacking a solid foundational knowledge of the capabilities of the system and readers not having any previous experience with MATLAB. The foundational knowledge gained from these interactive guided tours of the system will hopefully be sufficient for an effective utilization of MATLAB in the engineering profession, in education and in research. 2. To explain the foundations of more advanced use of MATLAB using the facilities added the last couple of years, such as extended data structures, object orientation and advanced graphics. 3. To give an introduction to the use of MATLAB in typical undergraduate courses in elec...

  9. Matlab linear algebra

    CERN Document Server

    Lopez, Cesar

    2014-01-01

    MATLAB is a high-level language and environment for numerical computation, visualization, and programming. Using MATLAB, you can analyze data, develop algorithms, and create models and applications. The language, tools, and built-in math functions enable you to explore multiple approaches and reach a solution faster than with spreadsheets or traditional programming languages, such as C/C++ or Java. MATLAB Linear Algebra introduces you to the MATLAB language with practical hands-on instructions and results, allowing you to quickly achieve your goals. In addition to giving an introduction to

  10. Comparison 3 - 386 MATLAB

    DEFF Research Database (Denmark)

    Jensen, Niels

    1992-01-01

    MATLAB is a C-based general tool for mathematical and engineering calculations with limited capabilities for simulation of non-linear equation systems.......MATLAB is a C-based general tool for mathematical and engineering calculations with limited capabilities for simulation of non-linear equation systems....

  11. Matlab laser toolbox

    NARCIS (Netherlands)

    Römer, Gerardus Richardus, Bernardus, Engelina; Huis in 't Veld, Bert; Schmidt, M.; Vollertsen, F.; Geiger, M.

    2010-01-01

    Matlab® is a program for numeric computation, simulation and visualization, developed by The Mathworks, Inc. It is used heavily in education, research, and industry, for solving general, as well as application area-specific problems, that arise in various disciplines. For this purpose Matlab has

  12. The Matlab Syntax

    DEFF Research Database (Denmark)

    Jørgensen, Jakob Heide; Skajaa, Anders

    Matlab (MATrix LABoratory) is one of the most widely used programming environments for numerical computations and simulations in the technical sciences. The reason is that Matlab makes it easy to get started as well as to construct advanced programs. This book is a practical guide to understanding...... and using Matlab. It works as a quick reference for anyone who is starting to use Matlab for example while enrolled in university studies. For this reason, the book is limited to covering what is typically used by a university student and is designed as a reference of the syntax including plenty of examples....... While the primary audience of the book is university students, it is well suited for anyone who wants to become acquainted with Matlab....

  13. R and Matlab

    CERN Document Server

    Hiebeler, David E

    2015-01-01

    The First Book to Explain How a User of R or MATLAB Can Benefit from the OtherIn today's increasingly interdisciplinary world, R and MATLAB® users from different backgrounds must often work together and share code. R and MATLAB® is designed for users who already know R or MATLAB and now need to learn the other platform. The book makes the transition from one platform to the other as quick and painless as possible.Enables R and MATLAB Users to Easily Collaborate and Share CodeThe author covers essential tasks, such as working with matrices and vectors, writing functions and other programming co

  14. Essential Matlab and Octave

    CERN Document Server

    Rogel-Salazar, Jesus

    2014-01-01

    ""This is an excellent book for anyone approaching MATLAB or Octave for the first time. The pleasant language used throughout creates the sensation of having the author by your side. … An interesting feature are the examples used to explain the use of functions and operations. … compared to similar texts on Octave and MATLAB, the author introduces at an early stage how to produce line and surface plots with MATLAB and Octave. It is very attractive to students to be able to quickly produce plots with scientific journal quality. … The margin notes are great as they can also work as virtual bookm

  15. Numerical methods using Matlab

    CERN Document Server

    Lindfield, George

    2012-01-01

    Numerical Methods using MATLAB, 3e, is an extensive reference offering hundreds of useful and important numerical algorithms that can be implemented into MATLAB for a graphical interpretation to help researchers analyze a particular outcome. Many worked examples are given together with exercises and solutions to illustrate how numerical methods can be used to study problems that have applications in the biosciences, chaos, optimization, engineering and science across the board. Numerical Methods using MATLAB, 3e, is an extensive reference offering hundreds of use

  16. Efficient Matlab Programs

    Data.gov (United States)

    National Aeronautics and Space Administration — Matlab has a reputation for running slowly. Here are some pointers on how to speed computations, to an often unexpected degree. Subjects currently covered: Matrix...

  17. Mathematical Modeling Using MATLAB

    National Research Council Canada - National Science Library

    Phillips, Donovan

    1998-01-01

    .... Mathematical Modeling Using MA MATLAB acts as a companion resource to A First Course in Mathematical Modeling with the goal of guiding the reader to a fuller understanding of the modeling process...

  18. MATLAB matrix algebra

    CERN Document Server

    Pérez López, César

    2014-01-01

    MATLAB is a high-level language and environment for numerical computation, visualization, and programming. Using MATLAB, you can analyze data, develop algorithms, and create models and applications. The language, tools, and built-in math functions enable you to explore multiple approaches and reach a solution faster than with spreadsheets or traditional programming languages, such as C/C++ or Java. MATLAB Matrix Algebra introduces you to the MATLAB language with practical hands-on instructions and results, allowing you to quickly achieve your goals. Starting with a look at symbolic and numeric variables, with an emphasis on vector and matrix variables, you will go on to examine functions and operations that support vectors and matrices as arguments, including those based on analytic parent functions. Computational methods for finding eigenvalues and eigenvectors of matrices are detailed, leading to various matrix decompositions. Applications such as change of bases, the classification of quadratic forms and ...

  19. An introduction to MATLAB.

    Science.gov (United States)

    Sobie, Eric A

    2011-09-13

    This two-part lecture introduces students to the scientific computing language MATLAB. Prior computer programming experience is not required. The lectures present basic concepts of computer programming logic that tend to cause difficulties for beginners in addition to concepts that relate specifically to the MATLAB language syntax. The lectures begin with a discussion of vectors, matrices, and arrays. Because many types of biological data, such as fluorescence images and DNA microarrays, are stored as two-dimensional objects, processing these data is a form of array manipulation, and MATLAB is especially adept at handling such array objects. The students are introduced to basic commands in MATLAB, as well as built-in functions that provide useful shortcuts. The second lecture focuses on the differences between MATLAB scripts and MATLAB functions and describes when one method of programming organization might be preferable to the other. The principles are illustrated through the analysis of experimental data, specifically measurements of intracellular calcium concentration in live cells obtained using confocal microscopy.

  20. Anti-idling campaign : Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-11-01

    The efficient use of transportation fuels and other petroleum products is being promoted by the Canadian Petroleum Products Institute. The Institute was busy during the past year in attempting to gain an understanding of the measures that could be adopted to assist motorists clearly identify the relationship between fuel consumption, personal transportation spending, and environmental impacts. The Institute undertook these efforts with Natural Resources Canada (NRCan) Office of Energy Efficiency (which both provided funding) and the Public Policy Forum. A first step proposed was the development of an anti-idling public awareness campaign. It was recognized that idling a vehicle for more than ten seconds costs money and wastes fuel, while simultaneously contributing to air pollution, greenhouse gas emissions, and climate change. The campaign also involved Esso, Shell, Petro-Canada, Canadian Tire and Sunoco for the development and implementation phases over the last two weeks of August 2002. A pilot campaign was tested in Mississauga, Ontario. Various materials were used for this campaign, such as posters, banners, cling vinyl window decals, air fresheners and information cards. The main successes of the campaign were: testing the methods of communicating the anti-idling message to drivers at gasoline retailing sites, increasing awareness among the driving public concerning the problems resulting from excessive idling, and encouraging the reduction of idling whenever and wherever it takes place. 1 tab.

  1. Approximate variational solutions of the Grad-Shafranov equation

    International Nuclear Information System (INIS)

    Ludwig, G.O.

    2001-01-01

    Approximate solutions of the Grad-Schlueter-Shafranov equation based on variational methods are developed. The power series solutions of the Euler-Lagrange equations for equilibrium are compared with direct variational results for a low aspect ratio tokamak equilibrium. (author)

  2. Accelerator Toolbox for MATLAB

    International Nuclear Information System (INIS)

    Terebilo, Andrei

    2001-01-01

    This paper introduces Accelerator Toolbox (AT)--a collection of tools to model particle accelerators and beam transport lines in the MATLAB environment. At SSRL, it has become the modeling code of choice for the ongoing design and future operation of the SPEAR 3 synchrotron light source. AT was designed to take advantage of power and simplicity of MATLAB--commercially developed environment for technical computing and visualization. Many examples in this paper illustrate the advantages of the AT approach and contrast it with existing accelerator code frameworks

  3. Introduction à MATLAB

    OpenAIRE

    Zenou, Emmanuel

    2013-01-01

    Cette initiation à MatLab a pour objectif de se familiariser à un outil très utilisé par la communauté scientifique dans les laboratoires et dans l'industrie. Il a également pour objectif d'initier (pour ceux qui n'y ont jamais touché) à la programmation et à l'algorithmique, ce qui est indispensable à tout bon ingénieur aujourd'hui. En effet, beaucoup de notions introduites ici ne sont pas propres à MatLab mais à tout langage structuré comme le C/C++, le Java, etc.

  4. MATLAB 3A

    DEFF Research Database (Denmark)

    Freil, Ole; Kristiansen, Heidi; Kaas, Thomas

    MATLAB 3a – Matematiklaboratoriet er en elevbog til første halvdel af 3. klasse. Bogen indeholder fire kapitler: 'Store tal og regnemåder', 'Kan du tegne det?', 'Gange og division', 'Undersøg data og chance'.......MATLAB 3a – Matematiklaboratoriet er en elevbog til første halvdel af 3. klasse. Bogen indeholder fire kapitler: 'Store tal og regnemåder', 'Kan du tegne det?', 'Gange og division', 'Undersøg data og chance'....

  5. Idleness, returns to education and child labor

    Directory of Open Access Journals (Sweden)

    José Raimundo Carvalho

    2012-12-01

    Full Text Available Although recent trends about child labor are positive, see ILO (2006, there still are important shortcomings which require further investigation. Among them, the exclusion of the category "idle children" (those who neither work nor study from past studies, as well as the lack of reliable information on returns to education are two significant omissions. By using a data base that contains details on idle children and a proxy for the returns to education, we find evidence that confirms traditional findings both with regard to the strong positive effect of parental background and to the positive relationship between the number of children in the household and child labor. On the other hand, our estimates point out new insights, such as the great regional variation of estimates and the fact that the Body Mass Index effect is positive. Finally, we suggest a new perspective on the issue of "street children" through the analysis of the category of "idle children".

  6. Basis and application of MATLAB

    International Nuclear Information System (INIS)

    Shin, Chun Sik; An, Yeong Ju; Byun, Gi Sik; Lee, Hyeong Gi

    1998-01-01

    This book introduces MATLAB, which deals with operation and basic function, MATLAB programming like for, if, else, while and script file, equation, calculation and interpolation, operation of the matrix, file management function, such as basic file management function input-output of internal file of MATLAB input-output of outer file of MATLAB, basic graph function, two-dimensional graph and three-dimensional graph and other graph function debugger of MATLAB program in 4.2 version and debugger of MATLAB in 5.1 version.

  7. The IDA-LIKE peptides IDL6 and IDL7 are negative modulators of stress responses in Arabidopsis thaliana.

    Science.gov (United States)

    Vie, Ane Kjersti; Najafi, Javad; Winge, Per; Cattan, Ester; Wrzaczek, Michael; Kangasjärvi, Jaakko; Miller, Gad; Brembu, Tore; Bones, Atle M

    2017-06-15

    Small signalling peptides have emerged as important cell to cell messengers in plant development and stress responses. However, only a few of the predicted peptides have been functionally characterized. Here, we present functional characterization of two members of the IDA-LIKE (IDL) peptide family in Arabidopsis thaliana, IDL6 and IDL7. Localization studies suggest that the peptides require a signal peptide and C-terminal processing to be correctly transported out of the cell. Both IDL6 and IDL7 appear to be unstable transcripts under post-transcriptional regulation. Treatment of plants with synthetic IDL6 and IDL7 peptides resulted in down-regulation of a broad range of stress-responsive genes, including early stress-responsive transcripts, dominated by a large group of ZINC FINGER PROTEIN (ZFP) genes, WRKY genes, and genes encoding calcium-dependent proteins. IDL7 expression was rapidly induced by hydrogen peroxide, and idl7 and idl6 idl7 double mutants displayed reduced cell death upon exposure to extracellular reactive oxygen species (ROS). Co-treatment of the bacterial elicitor flg22 with IDL7 peptide attenuated the rapid ROS burst induced by treatment with flg22 alone. Taken together, our results suggest that IDL7, and possibly IDL6, act as negative modulators of stress-induced ROS signalling in Arabidopsis. © The Author 2017. Published by Oxford University Press on behalf of the Society for Experimental Biology.

  8. DACE - A Matlab Kriging Toolbox

    DEFF Research Database (Denmark)

    2002-01-01

    DACE, Design and Analysis of Computer Experiments, is a Matlab toolbox for working with kriging approximations to computer models.......DACE, Design and Analysis of Computer Experiments, is a Matlab toolbox for working with kriging approximations to computer models....

  9. Matlab Based LOCO

    International Nuclear Information System (INIS)

    Portmann, Greg; Safranek, James; Huang, Xiaobiao

    2011-01-01

    The LOCO algorithm has been used by many accelerators around the world. Although the uses for LOCO vary, the most common use has been to find calibration errors and correct the optics functions. The light source community in particular has made extensive use of the LOCO algorithms to tightly control the beta function and coupling. Maintaining high quality beam parameters requires constant attention so a relatively large effort was put into software development for the LOCO application. The LOCO code was originally written in FORTRAN. This code worked fine but it was somewhat awkward to use. For instance, the FORTRAN code itself did not calculate the model response matrix. It required a separate modeling code such as MAD to calculate the model matrix then one manually loads the data into the LOCO code. As the number of people interested in LOCO grew, it required making it easier to use. The decision to port LOCO to Matlab was relatively easy. It's best to use a matrix programming language with good graphics capability; Matlab was also being used for high level machine control; and the accelerator modeling code AT, (5), was already developed for Matlab. Since LOCO requires collecting and processing a relative large amount of data, it is very helpful to have the LOCO code compatible with the high level machine control, (3). A number of new features were added while porting the code from FORTRAN and new methods continue to evolve, (7)(9). Although Matlab LOCO was written with AT as the underlying tracking code, a mechanism to connect to other modeling codes has been provided.

  10. Coronal Magnetism and Forward Solarsoft Idl Package

    Science.gov (United States)

    Gibson, S. E.

    2014-12-01

    The FORWARD suite of Solar Soft IDL codes is a community resource for model-data comparison, with a particular emphasis on analyzing coronal magnetic fields. FORWARD may be used both to synthesize a broad range of coronal observables, and to access and compare to existing data. FORWARD works with numerical model datacubes, interfaces with the web-served Predictive Science Inc MAS simulation datacubes and the Solar Soft IDL Potential Field Source Surface (PFSS) package, and also includes several analytic models (more can be added). It connects to the Virtual Solar Observatory and other web-served observations to download data in a format directly comparable to model predictions. It utilizes the CHIANTI database in modeling UV/EUV lines, and links to the CLE polarimetry synthesis code for forbidden coronal lines. FORWARD enables "forward-fitting" of specific observations, and helps to build intuition into how the physical properties of coronal magnetic structures translate to observable properties.

  11. Cosmology with MATLAB

    CERN Document Server

    Green, Dan

    2016-01-01

    This volume makes explicit use of the synergy between cosmology and high energy physics, for example, supersymmetry and dark matter, or nucleosynthesis and the baryon-to-photon ratio. In particular the exciting possible connection between the recently discovered Higgs scalar and the scalar field responsible for inflation is explored.The recent great advances in the accuracy of the basic cosmological parameters is exploited in that no free scale parameters such as h appear, rather the basic calculations are done numerically using all sources of energy density simultaneously. Scripts are provided that allow the reader to calculate exact results for the basic parameters. Throughout MATLAB tools such as symbolic math, numerical solutions, plots and 'movies' of the dynamical evolution of systems are used. The GUI package is also shown as an example of the real time manipulation of parameters which is available to the reader.All the MATLAB scripts are made available to the reader to explore examples of the uses of ...

  12. Digital speech processing using Matlab

    CERN Document Server

    Gopi, E S

    2014-01-01

    Digital Speech Processing Using Matlab deals with digital speech pattern recognition, speech production model, speech feature extraction, and speech compression. The book is written in a manner that is suitable for beginners pursuing basic research in digital speech processing. Matlab illustrations are provided for most topics to enable better understanding of concepts. This book also deals with the basic pattern recognition techniques (illustrated with speech signals using Matlab) such as PCA, LDA, ICA, SVM, HMM, GMM, BPN, and KSOM.

  13. The GRAD high-altitude balloon flight over Antarctica

    International Nuclear Information System (INIS)

    Eichhorn, G.; Coldwell, R.L.; Dunnam, F.E.; Rester, A.C.; Trombka, J.I.; Starr, R.; Lasche, G.P.

    1989-01-01

    The Gamma Ray Advanced Detector(GRAD) consists of a n-type germanium detector inside an active bismuth-germanate Compton and charged particle shield with additional active plastic shielding across the aperture. It will be flown on a high altitude balloon at 36 km altitude at a latitude of 78 degree S over Antarctica for observations of gamma radiation emitted by the radioactive decay of 56 Co in the Supernova SN1987A, for assessment of the performance of bismuth-germanate scintillation material in the radiation environment of near space, for gathering information on the gamma-ray background over Antarctica, and for testing fault-tolerant software

  14. Matlab differential and integral calculus

    CERN Document Server

    Lopez, Cesar

    2014-01-01

    MATLAB is a high-level language and environment for numerical computation, visualization, and programming. Using MATLAB, you can analyze data, develop algorithms, and create models and applications. The language, tools, and built-in math functions enable you to explore multiple approaches and reach a solution faster than with spreadsheets or traditional programming languages, such as C/C++ or Java. MATLAB Differential and Integral Calculus introduces you to the MATLAB language with practical hands-on instructions and results, allowing you to quickly achieve your goals. In addition to givi

  15. Matlab programming for numerical analysis

    CERN Document Server

    Lopez, Cesar

    2014-01-01

    MATLAB is a high-level language and environment for numerical computation, visualization, and programming. Using MATLAB, you can analyze data, develop algorithms, and create models and applications. The language, tools, and built-in math functions enable you to explore multiple approaches and reach a solution faster than with spreadsheets or traditional programming languages, such as C/C++ or Java. Programming MATLAB for Numerical Analysis introduces you to the MATLAB language with practical hands-on instructions and results, allowing you to quickly achieve your goals. You will first become

  16. Perancangan Kendali Pid Dengan Matlab

    OpenAIRE

    Sukamta, Sri

    2010-01-01

    Perancangan PID Controller selama ini menggunakan metoda trial and error dengan perhitungan yangmemakan waktu lama. MatLab yang dilengkapi Control Toolbox, membantu perancang untuk melihatrespon berbagai kombinasi konstanta dengan variasi input yang berbeda. Penggunaan MatLab ini sangatmembantu perancang dalam menentukan kombinasi di antara P, I, dan D Controller untuk menghasilkansistem pengaturan yang baik dan sederhana.

  17. Matpar: Parallel Extensions for MATLAB

    Science.gov (United States)

    Springer, P. L.

    1998-01-01

    Matpar is a set of client/server software that allows a MATLAB user to take advantage of a parallel computer for very large problems. The user can replace calls to certain built-in MATLAB functions with calls to Matpar functions.

  18. The GMT/MATLAB Toolbox

    Science.gov (United States)

    Wessel, Paul; Luis, Joaquim F.

    2017-02-01

    The GMT/MATLAB toolbox is a basic interface between MATLAB® (or Octave) and GMT, the Generic Mapping Tools, which allows MATLAB users full access to all GMT modules. Data may be passed between the two programs using intermediate MATLAB structures that organize the metadata needed; these are produced when GMT modules are run. In addition, standard MATLAB matrix data can be used directly as input to GMT modules. The toolbox improves interoperability between two widely used tools in the geosciences and extends the capability of both tools: GMT gains access to the powerful computational capabilities of MATLAB while the latter gains the ability to access specialized gridding algorithms and can produce publication-quality PostScript-based illustrations. The toolbox is available on all platforms and may be downloaded from the GMT website.

  19. Interactive data language (IDL) for medical image processing

    International Nuclear Information System (INIS)

    Md Saion Salikin

    2002-01-01

    Interactive Data Language (IDL) is one of many softwares available in the market for medical image processing and analysis. IDL is a complete, structured language that can be used both interactively and to create sophisticated functions, procedures, and applications. It provides a suitable processing routines and display method which include animation, specification of colour table including 24-bit capability, 3-D visualization and many graphic operation. The important features of IDL for medical imaging are segmentation, visualization, quantification and pattern recognition. In visualization IDL is capable of allowing greater precision and flexibility when visualizing data. For example, IDL eliminates the limits on Number of Contour level. In term of data analysis, IDL is capable of handling complicated functions such as Fast Fourier Transform (FFT) function, Hough and Radon Transform function, Legendre Polynomial function, as well as simple functions such as Histogram function. In pattern recognition, pattern description is defined as points rather than pixels. With this functionality, it is easy to re-use the same pattern on more than one destination device (even if the destinations have varying resolution). In other words it have the ability to specify values in points. However there are a few disadvantages of using IDL. Licensing is by dongkel key and limited licences hence limited access to potential IDL users. A few examples are shown to demonstrate the capabilities of IDL in carrying out its function for medical image processing. (Author)

  20. Remote Data Exploration with the Interactive Data Language (IDL)

    Science.gov (United States)

    Galloy, Michael

    2013-01-01

    A difficulty for many NASA researchers is that often the data to analyze is located remotely from the scientist and the data is too large to transfer for local analysis. Researchers have developed the Data Access Protocol (DAP) for accessing remote data. Presently one can use DAP from within IDL, but the IDL-DAP interface is both limited and cumbersome. A more powerful and user-friendly interface to DAP for IDL has been developed. Users are able to browse remote data sets graphically, select partial data to retrieve, import that data and make customized plots, and have an interactive IDL command line session simultaneous with the remote visualization. All of these IDL-DAP tools are usable easily and seamlessly for any IDL user. IDL and DAP are both widely used in science, but were not easily used together. The IDL DAP bindings were incomplete and had numerous bugs that prevented their serious use. For example, the existing bindings did not read DAP Grid data, which is the organization of nearly all NASA datasets currently served via DAP. This project uniquely provides a fully featured, user-friendly interface to DAP from IDL, both from the command line and a GUI application. The DAP Explorer GUI application makes browsing a dataset more user-friendly, while also providing the capability to run user-defined functions on specified data. Methods for running remote functions on the DAP server were investigated, and a technique for accomplishing this task was decided upon.

  1. Idleness, returns to education and child labor

    Directory of Open Access Journals (Sweden)

    José Raimundo Carvalho

    2012-12-01

    Full Text Available Although recent trends about child labor are positive, see ILO (2006, there still are important shortcomings which require further investigation. Among them, the exclusion of the category "idle children" (those who neither work nor study from past studies, as well as the lack of reliable information on returns to education are two significant omissions. By using a data base that contains details on idle children and a proxy for the returns to education, we find evidence that confirms traditional findings both with regard to the strong positive effect of parental background and to the positive relationship between the number of children in the household and child labor. On the other hand, our estimates point out new insights, such as the great regional variation of estimates and the fact that the Body Mass Index effect is positive. Finally, we suggest a new perspective on the issue of "street children" through the analysis of the category of "idle children".Apesar das recentes tendências sobre trabalho infantil serem positivas, ver ILO (2006, há importantes deficiências no entendimento do fenômeno. A exclusão da categoria "crianças desocupadas" (não trabalham e nem estudam em estudos passados, como também a ausência de informações fidedignas sobre retornos da educação são importantes omissões. Utilizando uma base de dados mais detalhada, bem como uma proxy para retornos da educação encontramos evidências que confirmam resultados tradicionais como o efeito positivo das características dos pais e a relação positiva entre o número de crianças, no trabalho infantil. Por outro lado, apontamos para novos entendimentos, como o fato da variável Índice de Massa Corporal possuir efeito positivo e a grande variação regional dos efeitos das estimativas. Por fim, sugerimos uma nova perspectiva sobre a questão das "crianças de rua" através da análise da categoria de "crianças desocupadas".

  2. KALMTOOL for use with MATLAB

    DEFF Research Database (Denmark)

    Nørgaard, Peter Magnus; Ravn, Ole; Poulsen, Niels Kjølstad

    2003-01-01

    The KALMTOOL toolbox is a set of MATLAB tools for state estimation for nonlinear systems. The toolbox contains functions for extended Kalman filtering as well as for two new filters called the DD1 filter and the DD2 filter. The toolbox specifically addresses the problem of not having observations...... available at all sampling instants. All functions are available as m-functions but for faster (much faster!) execution, the DD1 and DD2 filters are also available as C Mex files for MATLAB under Windows and Linux. The toolbox requires MATLAB 6. No additional toolboxes are required....

  3. Case Study – Idling Reduction Technologies for Emergency Service Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Laughlin, Michael [Argonne National Lab. (ANL), Argonne, IL (United States); Owens, Russell J. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-01-01

    This case study explores the use of idle reduction technologies (IRTs) on emergency service vehicles in police, fire, and ambulance applications. Various commercially available IRT systems and approaches can decrease, or ultimately eliminate, engine idling. Fleets will thus save money on fuel, and will also decrease their criteria pollutant emissions, greenhouse gas emissions, and noise.

  4. Une introduction à MATLAB c

    OpenAIRE

    CREMONA, Christian; LABORATOIRE CENTRAL DES PONTS ET CHAUSSEES - LCPC

    2002-01-01

    MATLAB c présente toutes les fonctionnalités des approches récentes de la programmation : programmation objet basée sur des hiérarchies de classes, programmation événementielle du graphisme. MATLAB c présente une aide en ligne très complète sous format html des différentes fontions accessibles. COMPTE RENDU DE RECHERCHE

  5. Statistics in Matlab a primer

    CERN Document Server

    Cho, MoonJung

    2014-01-01

    List of Tables Preface MATLAB BasicsDesktop Environment Getting Help and Other Documentation Data Import and Export Data I/O via the Command Line The Import Wizard Examples of Data I/O in MATLAB Data I/O with the Statistics Toolbox More Functions for Data I/O Data in MATLAB Data Objects in Base MATLAB Accessing Data Elements Examples of Joining Data Sets Data Types in the Statistics Toolbox Object-Oriented Programming Miscellaneous Topics File and Workspace Management Punctuation in MATLAB Arithmetic Operators Functions in MATLAB Summary and Further Reading Visualizing DataBasic Plot Functions Plotting 2-D Data Plotting 3-D Data Examples Scatter Plots Basic 2-D and 3-D Scatter Plots Scatter Plot Matrix Examples GUIs for Graphics Simple Plot Editing Plotting Tools Interface PLOTS Tab Summary and Further Reading Descriptive StatisticsMeasures of Location Means, Medians, and Modes Examples Measures of Dispersion Range Variance and Standard Deviation Covariance and Correlation Examples Describing the Distribution...

  6. Caterpillar MorElectric DOE Idle Reduction Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    John Bernardi

    2007-09-30

    This project titled 'Demonstration of the New MorElectric{trademark} Technology as an Idle Reduction Solution' is one of four demonstration projects awarded by the US Department of Energy in 2002. The goal of these demonstration and evaluation projects was to gather objective in-use information on the performance of available idle reduction technologies by characterizing the cost; fuel, maintenance, and engine life savings; payback; and user impressions of various systems and techniques. In brief, the Caterpillar Inc. project involved applying electrically driven accessories for cab comfort during engine-off stops and for reducing fuel consumption during on-highway operation. Caterpillar had equipped and operated five new trucks with the technology in conjunction with International Truck and Engine Corporation and COX Transfer. The most significant result of the project was a demonstrated average idle reduction of 13.8% for the 5 truck MEI fleet over the control fleet. It should be noted that the control fleet trucks were also equipped with an idle reduction device that would start and stop the main engine automatically in order to maintain cab temperature. The control fleet idle usage would have been reduced by 3858 hours over the 2 year period with the MEI system installed, or approximately 2315 gallons of fuel less (calculations assume a fuel consumption of 0.6 gallons per hour for the 13 liter engine at idle). The fuel saved will be significantly larger for higher displacement engines without idle reduction equipment such as the engine auto start/stop device used by COX Transfer. It is common for engines to consume 1.0 gallons per hour which would increase the fuel savings to approximately 1260 gallons per truck per year of typical idling (1800 hours idle/yr).

  7. Bargaining and idle public sector capacity in health care

    OpenAIRE

    Barros, Pedro Pita

    2005-01-01

    A feature present in countries with a National Health Service is the co−existence of a públic and a private sector. Often, the public payer contracts with private providers while holding idle capacity. This is often seen as inefficiency from the management of public facilities. We present here a different rationale for the existence of such idle capacity: the public sector may opt to have idle capacity as a way to gain bargaining power vis−à−vis the private provider, under the assumption of a...

  8. Bargaining and idle public sector capacity in health care

    OpenAIRE

    Xavier Martinez-Giralt; Barros Pedro Pita

    2005-01-01

    A feature present in countries with a National Health Service is the co-existence of a public and a private sector. Often, the public payer contracts with private providers while holding idle capacity. This is often seen as inefficiency from the management of public facilities. We present here a different rationale for the existence of such idle capacity: the public sector may opt to have idle capacity as a way to gain bargaining power vis-Ã -vis the private provider, under the assumption of ...

  9. Test Generator for MATLAB Simulations

    Science.gov (United States)

    Henry, Joel

    2011-01-01

    MATLAB Automated Test Tool, version 3.0 (MATT 3.0) is a software package that provides automated tools that reduce the time needed for extensive testing of simulation models that have been constructed in the MATLAB programming language by use of the Simulink and Real-Time Workshop programs. MATT 3.0 runs on top of the MATLAB engine application-program interface to communicate with the Simulink engine. MATT 3.0 automatically generates source code from the models, generates custom input data for testing both the models and the source code, and generates graphs and other presentations that facilitate comparison of the outputs of the models and the source code for the same input data. Context-sensitive and fully searchable help is provided in HyperText Markup Language (HTML) format.

  10. Signals and systems with MATLAB

    CERN Document Server

    Yang, Won Young; Song, Ik H; Cho, Yong S

    2009-01-01

    Covers some of the theoretical foundations and mathematical derivations that can be used in higher-level related subjects such as signal processing, communication, and control, minimizing the mathematical difficulty and computational burden. This book illustrates the usage of MATLAB and Simulink for signal and system analysis and design.

  11. Matlab Software for Spatial Panels

    NARCIS (Netherlands)

    Elhorst, J.Paul

    2014-01-01

    Elhorst provides Matlab routines to estimate spatial panel data models at his website. This article extends these routines to include the bias correction procedure proposed by Lee and Yu if the spatial panel data model contains spatial and/or time-period fixed effects, the direct and indirect

  12. The Grad Cohort Workshop: Evaluating an Intervention to Retain Women Graduate Students in Computing.

    Science.gov (United States)

    Stout, Jane G; Tamer, Burçin; Wright, Heather M; Clarke, Lori A; Dwarkadas, Sandhya; Howard, Ayanna M

    2016-01-01

    Women engaged in computing career tracks are vastly outnumbered by men and often must contend with negative stereotypes about their innate technical aptitude. Research suggests women's marginalized presence in computing may result in women psychologically disengaging, and ultimately dropping out, perpetuating women's underrepresentation in computing. To combat this vicious cycle, the Computing Research Association's Committee on the Status of Women in Computing Research (CRA-W) runs a multi-day mentorship workshop for women graduate students called Grad Cohort, which consists of a speaker series and networking opportunities. We studied the long-term impact of Grad Cohort on women Ph.D. students' (a) dedication to becoming well-known in one's field, and giving back to the community ( professional goals ), (b) the degree to which one feels computing is an important element of "who they are" ( computing identity) , and (c) beliefs that computing skills are innate ( entity beliefs ). Of note, entity beliefs are known to be demoralizing and can lead to disengagement from academic endeavors. We compared a propensity score matched sample of women and men Ph.D. students in computing programs who had never participated in Grad Cohort to a sample of past Grad Cohort participants. Grad Cohort participants reported interest in becoming well-known in their field to a greater degree than women non-participants, and to an equivalent degree as men. Also, Grad Cohort participants reported stronger interest in giving back to the community than their peers. Further, whereas women non-participants identified with computing to a lesser degree than men and held stronger entity beliefs than men, Grad Cohort participants' computing identity and entity beliefs were equivalent to men. Importantly, stronger entity beliefs predicted a weaker computing identity among students, with the exception of Grad Cohort participants. This latter finding suggests Grad Cohort may shield students

  13. Solving applied mathematical problems with Matlab

    CERN Document Server

    Xue, Dingyu

    2008-01-01

    Computer Mathematics Language-An Overview. Fundamentals of MATLAB Programming. Calculus Problems. MATLAB Computations of Linear Algebra Problems. Integral Transforms and Complex Variable Functions. Solutions to Nonlinear Equations and Optimization Problems. MATLAB Solutions to Differential Equation Problems. Solving Interpolations and Approximations Problems. Solving Probability and Mathematical Statistics Problems. Nontraditional Solution Methods for Mathematical Problems.

  14. Digital signal processing using MATLAB

    CERN Document Server

    Schilling, Robert L

    2016-01-01

    Focus on the development, implementation, and application of modern DSP techniques with DIGITAL SIGNAL PROCESSING USING MATLAB(R), 3E. Written in an engaging, informal style, this edition immediately captures your attention and encourages you to explore each critical topic. Every chapter starts with a motivational section that highlights practical examples and challenges that you can solve using techniques covered in the chapter. Each chapter concludes with a detailed case study example, a chapter summary with learning outcomes, and practical homework problems cross-referenced to specific chapter sections for your convenience. DSP Companion software accompanies each book to enable further investigation. The DSP Companion software operates with MATLAB(R) and provides intriguing demonstrations as well as interactive explorations of analysis and design concepts.

  15. MatLab 1b

    DEFF Research Database (Denmark)

    Kristiansen, Heidi; Kaas, Thomas; Freil, Ole

    Bogen indeholder fire kapitler: ’Tal i spil’, ’Spejlinger og mønstre’, ’Mønstre med farver, figurer og tal’ og ’Længde og vægt’. MATLAB: •bygger på en undersøgende og problemorienteret tilgang til matematikken •understøtter læringsmålstyret undervisning •har fokus på faglige samtaler og undersøge......Bogen indeholder fire kapitler: ’Tal i spil’, ’Spejlinger og mønstre’, ’Mønstre med farver, figurer og tal’ og ’Længde og vægt’. MATLAB: •bygger på en undersøgende og problemorienteret tilgang til matematikken •understøtter læringsmålstyret undervisning •har fokus på faglige samtaler og...

  16. Computational colour science using MATLAB

    CERN Document Server

    Westland, Stephen; Cheung, Vien

    2012-01-01

    Computational Colour Science Using MATLAB 2nd Edition offers a practical, problem-based approach to colour physics. The book focuses on the key issues encountered in modern colour engineering, including efficient representation of colour information, Fourier analysis of reflectance spectra and advanced colorimetric computation. Emphasis is placed on the practical applications rather than the techniques themselves, with material structured around key topics. These topics include colour calibration of visual displays, computer recipe prediction and models for colour-appearance prediction. Each t

  17. MatLab 1a

    DEFF Research Database (Denmark)

    Kristiansen, Heidi; Kaas, Thomas; Freil, Ole

    Bogen indeholder fire kapitler: ’Tæl og brug tal’, ’Undersøg figurer’, ’Plus- og minusproblemer’ og ’Statistik og chance’. MATLAB: •bygger på en undersøgende og problemorienteret tilgang til matematikken •understøtter læringsmålstyret undervisning •har fokus på faglige samtaler og undersøgelser...

  18. MatLab 0. Matematiklaboratoriet

    DEFF Research Database (Denmark)

    Kristiansen, Heidi; Kaas, Thomas; Freil, Ole

    Bogen indeholder fem kapitler: ’Tælle og tal’, ’Figurer og mønstre’, ’Hvor mange?’, ’Måling’ og ’Data og diagrammer’. MATLAB: •bygger på en undersøgende og problemorienteret tilgang til matematikken •understøtter læringsmålstyret undervisning •har fokus på faglige samtaler og undersøgelser, der...

  19. GRAD-MAP: A Joint Physics and Astronomy Diversity Initiative at the University of Maryland

    Science.gov (United States)

    Steele, Amy; Smith, Robyn; Wilkins, Ashlee; Jameson, Katie

    2018-01-01

    Graduate Resources for Advancing Diversity with Maryland’s Astronomy and Physics (GRAD-MAP), builds connections between UMD and mid-Atlantic HBCUs, Minority-Serving Institutions (MSIs), and community colleges. We use seminars, forums, and workshops to foster a diverse community of undergraduates prepared to succeed in graduate school, inclusion-minded graduate student mentors, and faculty versed in the experiences of students at MSIs and the need for changes in the fields of physics and astronomy. Now in its fifth year, GRAD-MAP remains a graduate-student-powered initiative with a three-pronged approach: 1) Fall Collaborative Seminars, 2) A Winter Workshop, and 3) A Summer Scholars Program. This coherent set of programming allows GRAD-MAP to do more than just increase the numbers of minority students participating in astronomy and physics research (or worse, simply shuffle around students who already are or would be active in research). GRAD-MAP is committed to identifying students who are otherwise underserved or overlooked by the traditional academic pipeline, not only to get them on the path to be successful undergraduate researchers and eventual graduate applicants, but also to make substantial, sustainable efforts toward making the climate of academic physics and astronomy more inclusive to them and all other underrepresented minority students. We will describe the key elements of our program, highlight successes and lessons learned, and describe future directions for program elements. GRAD-MAP can serve as a model for other universities committed to diversity and inclusion.

  20. Impact of idling on fuel consumption and exhaust emissions and available idle-reduction technologies for diesel vehicles – A review

    International Nuclear Information System (INIS)

    Rahman, S.M. Ashrafur; Masjuki, H.H.; Kalam, M.A.; Abedin, M.J.; Sanjid, A.; Sajjad, H.

    2013-01-01

    Highlights: • In this paper we reviewed the impact of diesel vehicles idling on fuel consumption and exhaust emission. • Fuel consumption and emissions during idling are very high compared to driving cycle. • The effects of various operating on fuel consumption and exhaust emission were discussed. • Available idle-reduction technologies impact on idling fuel consumption and emissions were discussed. • Idling reduction technologies reduce fuel consumption and emissions significantly. - Abstract: In order to maintain cab comfort truck drivers have to idle their engine to obtain the required power for accessories, such as the air conditioner, heater, television, refrigerator, and lights. This idling of the engine has a major impact on its fuel consumption and exhaust emission. Idling emissions can be as high as 86.4 g/h, 16,500 g/h, 5130 g/h, 4 g/h, and 375 g/h for HC, CO 2 , CO, PM, and NOx, respectively. Idling fuel consumption rate can be as high as 1.85 gal/h. The accessory loading, truck model, fuel-injection system, ambient temperature, idling speed, etc., also affect significantly the emission levels and fuel consumption rate. An increase in accessory loading and ambient temperature increases the emissions and fuel consumption. During idling, electronic fuel-injection systems reduce HC, PM, and CO emission, but increase NOx emissions compared with a mechanical fuel-injection system. An increase of idling speed increases fuel consumption rate. There are many systems available on the market to reduce engine idling and improve air quality and fuel consumption rate, such as an auxiliary power unit (APU), truck stop electrification, thermal storage systems, fuel cells, and direct fire heaters. A direct fire heater reduces fuel consumption by 94–96% and an APU reduces consumption by 60–87%. Furthermore, these technologies increase air quality significantly by reducing idling emissions, which is the reason why they are considered as key alternatives to

  1. A MATLAB companion for multivariable calculus

    CERN Document Server

    Cooper, Jeffery

    2001-01-01

    Offering a concise collection of MatLab programs and exercises to accompany a third semester course in multivariable calculus, A MatLab Companion for Multivariable Calculus introduces simple numerical procedures such as numerical differentiation, numerical integration and Newton''s method in several variables, thereby allowing students to tackle realistic problems. The many examples show students how to use MatLab effectively and easily in many contexts. Numerous exercises in mathematics and applications areas are presented, graded from routine to more demanding projects requiring some programming. Matlab M-files are provided on the Harcourt/Academic Press web site at http://www.harcourt-ap.com/matlab.html.* Computer-oriented material that complements the essential topics in multivariable calculus* Main ideas presented with examples of computations and graphics displays using MATLAB * Numerous examples of short code in the text, which can be modified for use with the exercises* MATLAB files are used to implem...

  2. Optimization of Steering System of Forklift Vehicle for Idle Performance

    Directory of Open Access Journals (Sweden)

    Yuan Shen

    2015-01-01

    Full Text Available This paper presents an optimal design process for the steering system of a forklift vehicle. An efficient procedure for minimizing the engine-induced idle vibration is developed in this study. Reciprocating unbalance and gas pressure torque as two major sources of engine excitation are studied. Using the field vibration tests and FEM analysis, the cause and characteristics of steering system’s idle vibration are recognized. So as to distribute the characteristic modes based on the optimization strategy, global sensitivity analysis of the main parameters is also carried out to achieve the optimal combination of the optimization factors. Based on all analysis above, some structure modifications for optimization are presented to control the idle vibration. The effectiveness and rationality of the improvements are also verified through experimental prototyping testing. This study also makes it possible to provide a design guideline using CAE (computer aided engineering analysis for some other objects.

  3. Idling operation apparatus for multicylinder fuel injection engine

    Energy Technology Data Exchange (ETDEWEB)

    Kanahira, A

    1974-11-20

    A device to cut off the fuel supply to a number of cylinders at idling is described for those engines equipped with multicylinder fuel injection systems. The discontinuation of the fuel gas supply to the cylinders is made by a magnetically operated valve which is related to the accelerator. When the engine is idling, a switch activates the magnetic valve and the tube leading to the cylinder closes while a valve on the tube leading to a dual tank opens, and the pumped gas returns to the tank. This valve is installed on several cylinders, but not on all. Thus, at idling only a certain number of cylinders are firing, which lowers the hydrocarbon levels in the exhaust gas since non-firing cylinders intake and discharge only air.

  4. Mixed municipal solid waste (MSW) treatment in Waste centre Spodnji Stari Grad, Krško

    OpenAIRE

    Kortnik, Jože; Leskovar, Jože

    2015-01-01

    Review paper Received: October 25, 2013 Accepted: November 7, 2013 Mixed municipal solid waste (MSW) treatment in Waste centre Spodnji Stari Grad, Krško Ravnanje z mešanimi komunalnimi odpadki v Zbirnem centru Spodnji Stari Grad, Krško Jože Kortnik1'*, Jože Leskovar2 University of Ljubljana, Faculty of Natural Sciences and Engineering, Department of Mining and Geotechnology, Aškerčeva 12, 1000 Ljubljana, Slovenia 2Kostak, d. d., Leskovška cesta 2a, 8270 Krško, Slovenia Correspo...

  5. Matlab modeling of ITER CODAC

    International Nuclear Information System (INIS)

    Pangione, L.; Lister, J.B.

    2008-01-01

    The ITER CODAC (COntrol, Data Access and Communication) conceptual design resulted from 2 years of activity. One result was a proposed functional partitioning of CODAC into different CODAC Systems, each of them partitioned into other CODAC Systems. Considering the large size of this project, simple use of human language assisted by figures would certainly be ineffective in creating an unambiguous description of all interactions and all relations between these Systems. Moreover, the underlying design is resident in the mind of the designers, who must consider all possible situations that could happen to each system. There is therefore a need to model the whole of CODAC with a clear and preferably graphical method, which allows the designers to verify the correctness and the consistency of their project. The aim of this paper is to describe the work started on ITER CODAC modeling using Matlab/Simulink. The main feature of this tool is the possibility of having a simple, graphical, intuitive representation of a complex system and ultimately to run a numerical simulation of it. Using Matlab/Simulink, each CODAC System was represented in a graphical and intuitive form with its relations and interactions through the definition of a small number of simple rules. In a Simulink diagram, each system was represented as a 'black box', both containing, and connected to, a number of other systems. In this way it is possible to move vertically between systems on different levels, to show the relation of membership, or horizontally to analyse the information exchange between systems at the same level. This process can be iterated, starting from a global diagram, in which only CODAC appears with the Plant Systems and the external sites, and going deeper down to the mathematical model of each CODAC system. The Matlab/Simulink features for simulating the whole top diagram encourage us to develop the idea of completing the functionalities of all systems in order to finally have a full

  6. ECONOMIC MODELING PROCESSES USING MATLAB

    Directory of Open Access Journals (Sweden)

    Anamaria G. MACOVEI

    2008-06-01

    Full Text Available To study economic phenomena and processes using mathem atical modeling, and to determine the approximatesolution to a problem we need to choose a method of calculation and a numerical computer program, namely thepackage of programs MatLab. Any economic process or phenomenon is a mathematical description of h is behavior,and thus draw up an economic and mathematical model that has the following stages: formulation of the problem, theanalysis process modeling, the production model and design verification, validation and implementation of the model.This article is presented an economic model and its modeling is using mathematical equations and software packageMatLab, which helps us approximation effective solution. As data entry is considered the net cost, the cost of direct andtotal cost and the link between them. I presented the basic formula for determining the total cost. Economic modelcalculations were made in MatLab software package and with graphic representation of its interpretation of the resultsachieved in terms of our specific problem.

  7. Easy web interfaces to IDL code for NSTX Data Analysis

    International Nuclear Information System (INIS)

    Davis, W.M.

    2012-01-01

    Highlights: ► Web interfaces to IDL code can be developed quickly. ► Dozens of Web Tools are used effectively on NSTX for Data Analysis. ► Web interfaces are easier to use than X-window applications. - Abstract: Reusing code is a well-known Software Engineering practice to substantially increase the efficiency of code production, as well as to reduce errors and debugging time. A variety of “Web Tools” for the analysis and display of raw and analyzed physics data are in use on NSTX [1], and new ones can be produced quickly from existing IDL [2] code. A Web Tool with only a few inputs, and which calls an IDL routine written in the proper style, can be created in less than an hour; more typical Web Tools with dozens of inputs, and the need for some adaptation of existing IDL code, can be working in a day or so. Efficiency is also increased for users of Web Tools because of the familiar interface of the web browser, and not needing X-windows, or accounts and passwords, when used within our firewall. Web Tools were adapted for use by PPPL physicists accessing EAST data stored in MDSplus with only a few man-weeks of effort; adapting to additional sites should now be even easier. An overview of Web Tools in use on NSTX, and a list of the most useful features, is also presented.

  8. 40 CFR 86.1527 - Idle test procedure; overview.

    Science.gov (United States)

    2010-07-01

    ... from a single exhaust pipe in which exhaust products are homogeneously mixed. The configuration for... additional “Y” pipe be placed in the exhaust system before dilution. [48 FR 52252, Nov. 16, 1983... determine the raw concentration (in percent) of CO in the exhaust flow at idle. The test procedure begins...

  9. Menhir: An Environment for High Performance Matlab

    Directory of Open Access Journals (Sweden)

    Stéphane Chauveau

    1999-01-01

    Full Text Available In this paper we present Menhir a compiler for generating sequential or parallel code from the Matlab language. The compiler has been designed in the context of using Matlab as a specification language. One of the major features of Menhir is its retargetability to generate parallel and sequential C or Fortran code. We present the compilation process and the target system description for Menhir. Preliminary performances are given and compared with MCC, the MathWorks Matlab compiler.

  10. Cyclotron beam dynamic simulations in MATLAB

    International Nuclear Information System (INIS)

    Karamysheva, G.A.; Karamyshev, O.V.; Lepkina, O.E.

    2008-01-01

    MATLAB is useful for beam dynamic simulations in cyclotrons. Programming in an easy-to-use environment permits creation of models in a short space of time. Advanced graphical tools of MATLAB give good visualization features to created models. The beam dynamic modeling results with an example of two different cyclotron designs are presented. Programming with MATLAB opens wide possibilities of the development of the complex program, able to perform complete block of calculations for the design of the accelerators

  11. GRAD-MAP: A Joint Physics and Astronomy Diversity Initiative at the University of Maryland

    Science.gov (United States)

    Wilkins, Ashlee N.; Jameson, Katherine; Taylor, Corbin James; Anderson, Neil; Megson, Peter; Roberg-Clark, Gareth; Sheppard, Kyle; Uher, Tim; Hammer, Donna; Vogel, Stuart N.

    2016-01-01

    Graduate Resources for Advancing Diversity with Maryland's Astronomy and Physics (GRAD-MAP), builds connections between UMD and mid-Atlantic HBCUs, Minority-Serving Institutions, and community colleges, and uses seminars, forums, and workshops to foster a diverse community of undergraduates prepared to succeed in graduate school, and is now in its third year. GRAD-MAP launched with a three-pronged approach: 1) Collaborative Seminars, 2) A Winter Workshop, and 3) A Spring Symposium. This program allows GRAD-MAP to do more than just increase the numbers of minority students participating in astronomy and physics research (or, worse, simply shuffle around students who already are or would be); it is committed to identifying students who are otherwise underserved or overlooked by the traditional academic pipeline, not only to get them on the path to be successful undergraduate researchers and eventual graduate applicants, but also to make the climate of academic physics and astronomy more inclusive to them and all other underrepresented minority students. Our poster describes the key elements of our program, and highlights successes and lessons learned; GRAD-MAP can serve as a model for other universities committed to diversity and inclusion.

  12. Rising Tide II: Do Black Students Benefit as Grad Rates Increase?

    Science.gov (United States)

    Nichols, Andrew Howard; Eberle-Sudré, Kimberlee; Welch, Meredith

    2016-01-01

    "Rising Tide II: Do Black Students Benefit as Grad Rates Increase?" looks at a decade of graduation rates for African American students at four-year, public institutions that improved student success during the past decade. It shows that while a majority (almost 70 percent) of institutions we examined improved graduation rates for black…

  13. Theory of Perturbed Equilibria for Solving the Grad-Shafranov Equation

    International Nuclear Information System (INIS)

    Pletzer, A.; Zakharov, L.E.

    1999-01-01

    The theory of perturbed magnetohydrodynamic equilibria is presented for different formulations of the tokamak equilibrium problem. For numerical codes, it gives an explicit Newton scheme for solving the Grad-Shafranov equation subject to different constraints. The problem of stability of axisymmetric modes is shown to be a particular case of the equilibrium perturbation theory

  14. Grad Nation: A Guidebook to Help Communities Tackle the Dropout Crisis

    Science.gov (United States)

    Balfanz, Robert; Fox, Joanna Hornig; Bridgeland, John M.; McNaught, Mary

    2009-01-01

    With more than one million students dropping out of high school each year, Grad Nation is specifically designed to offer solutions and tools for every size community and presents a compelling case for all sectors of society to get involved. The guidebook is part of the Alliance's Dropout Prevention Campaign. The guide brings together the nation's…

  15. MatLab Script and Functional Programming

    Science.gov (United States)

    Shaykhian, Gholam Ali

    2007-01-01

    MatLab Script and Functional Programming: MatLab is one of the most widely used very high level programming languages for scientific and engineering computations. It is very user-friendly and needs practically no formal programming knowledge. Presented here are MatLab programming aspects and not just the MatLab commands for scientists and engineers who do not have formal programming training and also have no significant time to spare for learning programming to solve their real world problems. Specifically provided are programs for visualization. The MatLab seminar covers the functional and script programming aspect of MatLab language. Specific expectations are: a) Recognize MatLab commands, script and function. b) Create, and run a MatLab function. c) Read, recognize, and describe MatLab syntax. d) Recognize decisions, loops and matrix operators. e) Evaluate scope among multiple files, and multiple functions within a file. f) Declare, define and use scalar variables, vectors and matrices.

  16. Orthogonal transformations for change detection, Matlab code

    DEFF Research Database (Denmark)

    2005-01-01

    Matlab code to do multivariate alteration detection (MAD) analysis, maximum autocorrelation factor (MAF) analysis, canonical correlation analysis (CCA) and principal component analysis (PCA) on image data.......Matlab code to do multivariate alteration detection (MAD) analysis, maximum autocorrelation factor (MAF) analysis, canonical correlation analysis (CCA) and principal component analysis (PCA) on image data....

  17. Accelerator Modeling with MATLAB Accelerator Toolbox

    International Nuclear Information System (INIS)

    2002-01-01

    This paper introduces Accelerator Toolbox (AT)--a collection of tools to model storage rings and beam transport lines in the MATLAB environment. The objective is to illustrate the flexibility and efficiency of the AT-MATLAB framework. The paper discusses three examples of problems that are analyzed frequently in connection with ring-based synchrotron light sources

  18. Channel Access Client Toolbox for Matlab

    International Nuclear Information System (INIS)

    2002-01-01

    This paper reports on MATLAB Channel Access (MCA) Toolbox--MATLAB [1] interface to EPICS Channel Access (CA) client library. We are developing the toolbox for SPEAR3 accelerator controls, but it is of general use for accelerator and experimental physics applications programming. It is packaged as a MATLAB toolbox to allow easy development of complex CA client applications entirely in MATLAB. The benefits include: the ability to calculate and display parameters that use EPICS process variables as inputs, availability of MATLAB graphics tools for user interface design, and integration with the MATLABbased accelerator modeling software - Accelerator Toolbox [2-4]. Another purpose of this paper is to propose a feasible path to a synergy between accelerator control systems and accelerator simulation codes, the idea known as on-line accelerator model

  19. Characterization of PTO and Idle Behavior for Utility Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Duran, Adam W. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Konan, Arnaud M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Miller, Eric S. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kelly, Kenneth J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Prohaska, Robert S. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-09-28

    This report presents the results of analyses performed on utility vehicle data composed primarily of aerial lift bucket trucks sampled from the National Renewable Energy Laboratory's Fleet DNA database to characterize power takeoff (PTO) and idle operating behavior for utility trucks. Two major data sources were examined in this study: a 75-vehicle sample of Odyne electric PTO (ePTO)-equipped vehicles drawn from multiple fleets spread across the United States and 10 conventional PTO-equipped Pacific Gas and Electric fleet vehicles operating in California. Novel data mining approaches were developed to identify PTO and idle operating states for each of the datasets using telematics and controller area network/onboard diagnostics data channels. These methods were applied to the individual datasets and aggregated to develop utilization curves and distributions describing PTO and idle behavior in both absolute and relative operating terms. This report also includes background information on the source vehicles, development of the analysis methodology, and conclusions regarding the study's findings.

  20. Parallelizing AT with MatlabMPI

    International Nuclear Information System (INIS)

    2011-01-01

    The Accelerator Toolbox (AT) is a high-level collection of tools and scripts specifically oriented toward solving problems dealing with computational accelerator physics. It is integrated into the MATLAB environment, which provides an accessible, intuitive interface for accelerator physicists, allowing researchers to focus the majority of their efforts on simulations and calculations, rather than programming and debugging difficulties. Efforts toward parallelization of AT have been put in place to upgrade its performance to modern standards of computing. We utilized the packages MatlabMPI and pMatlab, which were developed by MIT Lincoln Laboratory, to set up a message-passing environment that could be called within MATLAB, which set up the necessary pre-requisites for multithread processing capabilities. On local quad-core CPUs, we were able to demonstrate processor efficiencies of roughly 95% and speed increases of nearly 380%. By exploiting the efficacy of modern-day parallel computing, we were able to demonstrate incredibly efficient speed increments per processor in AT's beam-tracking functions. Extrapolating from prediction, we can expect to reduce week-long computation runtimes to less than 15 minutes. This is a huge performance improvement and has enormous implications for the future computing power of the accelerator physics group at SSRL. However, one of the downfalls of parringpass is its current lack of transparency; the pMatlab and MatlabMPI packages must first be well-understood by the user before the system can be configured to run the scripts. In addition, the instantiation of argument parameters requires internal modification of the source code. Thus, parringpass, cannot be directly run from the MATLAB command line, which detracts from its flexibility and user-friendliness. Future work in AT's parallelization will focus on development of external functions and scripts that can be called from within MATLAB and configured on multiple nodes, while

  1. MATLAB for Engineering and the Life Sciences

    CERN Document Server

    Tranquillo, Joseph

    2011-01-01

    In recent years, the life sciences have embraced simulation as an important tool in biomedical research. Engineers are also using simulation as a powerful step in the design process. In both arenas, Matlab has become the gold standard. It is easy to learn, flexible, and has a large and growing userbase. MATLAB for Engineering and the Life Sciences is a self-guided tour of the basic functionality of MATLAB along with the functions that are most commonly used in biomedical engineering and other life sciences. Although the text is written for undergraduates, graduate students and academics, those

  2. Stability of foot-and-mouth disease virus, its genome and proteins at 37 grad C

    International Nuclear Information System (INIS)

    Razdan, R.; Sen, A.K.; Rao, B.V.; Suryanarayana, V.V.S.

    1996-01-01

    Infectivity titers of foot-and-mouth disease virus (FMDV) types Asia 1 and 0 were reduced by 4 and 2 log units, respectively, after incubation at 37 grad C for 12 hours. The stability of the FMDV RNA genome at 37 grad C was studied using 32 P-labelled virus. The RNA of FMDV type 0 was found to be more stable than that of type Asia 1. Oligo(dT)-cellulose chromatography showed that 21 % and 31 % of the labelled RNA were bound to the column in the case of types Asia 1 and 0, respectively. Possible correlation between the poly(A) tail length, accessibility of the genome to nucleases and thermo-stability of the infective virus is discussed. A possible correlation between the thermo-stability of the genome and general distribution of a particular virus type seems to exist. A stable genome associated with poor virus immunogenicity may be responsible for the prevalence of FMDV type 0 in the nature. The isoelectric focussing of structural proteins isolated from the virus samples incubated at 37 grad C revealed charge differences in the major immuno-gen between the two FMDV types. A rapid proteolytic degradation of the viral immuno-gen and stability of the genome may be responsible for frequent outbreaks of FMDV, at least, in the endemic countries. (author)

  3. The origin of volcanic rock fragments in Upper Pliocene Grad Member of the Mura Formation, North-Eastern Slovenia

    Directory of Open Access Journals (Sweden)

    Polona Kralj

    2006-12-01

    Full Text Available Fresh-water, coarse-grained and detritus-dominated Mura Formation in North Eastern Slovenia includes pyroclastic and volcaniclastic deposits originating from Upper Pliocene volcanic activity of basaltic geochemical character. Although localized in occurrence at the hamlet Grad, these pyroclastic and volcaniclastic sediments forma distinctive depositional unit, for which the term “Grad Member” is proposed and introduced in this paper.In the Grad area no lavas or cinder cones are preserved, and the origin of volcaniclastic fragments still uncertain. For this reason, chemical composition of basaltic rock fragments from the Grad Member volcaniclastics has been studied and compared with basaltic rocks from the neighboring locations at Klöch, Kindsberg, Dölling and Neuhaus. The Grad Member pyroclastic and volcaniclastic deposits seem to be fed from the same source which is different from the occurrences in Austria. That supports the idea about the existence of a local volcanic centre in the present Grad area. The old volcanic edificeswerepossiblydestroyed by the late-stage hydrovolcanic eruptions, and pyroclastic and volcaniclastic deposits subjected to constant reworking by fluvial currents in a dynamic sedimentary environment of alluvial fan and braided river systems.

  4. One hundred physics visualizations using Matlab

    CERN Document Server

    Green, Dan

    2014-01-01

    This book provides visualizations of many topics in general physics. The aim is to have an interactive MATLAB script wherein the user can vary parameters in a specific problem and then immediately see the outcome by way of dynamic movies of the response of the system in question. MATLAB tools are used throughout and the software scripts accompany the text in Symbolic Mathematics, Classical Mechanics, Electromagnetism, Waves and Optics, Gases and Fluid Flow, Quantum Mechanics, Special and General Relativity, and Astrophysics and Cosmology. The emphasis is on building up an intuition by running many different parametric choices chosen actively by the user and watching the subsequent behavior of the system. Physics books using MATLAB do not have the range or the intent of this text. They are rather steeped in technical detail. Symbolic math is used extensively and is integral to the aim of using MATLAB tools to accomplish the technical aspects of problem solving.

  5. An Accelerator control middle layer using Matlab

    CERN Document Server

    Portmann, G J; Terebilo, Andrei

    2005-01-01

    Matlab is a matrix manipulation language originally developed to be a convenient language for using the LINPACK and EISPACK libraries. What makes Matlab so appealing for accelerator physics is the combination of a matrix oriented programming language, an active workspace for system variables, powerful graphics capability, built-in math libraries, and platform independence. A number of software toolboxes for accelerators have been written in Matlab – the Accelerator Toolbox (AT) for machine simulations, LOCO for accelerator calibration, Matlab Channel Access Toolbox (MCA) for EPICS connections, and the Middle Layer. This paper will describe the MiddleLayer software toolbox that resides between the high-level control applications and the low-level accelerator control system. This software was a collaborative effort between ALS and Spear but was written to easily port. Five accelerators presently use this software – Spear, ALS, CLS, and the X-ray and VUV rings at Brookhaven. The Middle Layer fu...

  6. An introduction to differential equations using MATLAB

    CERN Document Server

    Butt, Rizwan

    2016-01-01

    An Introduction to Differential Equations using MATLAB exploits the symbolic, numerical, and graphical capabilitiesof MATLAB to develop a thorough understanding of differential equations algorithms. This book provides the readerwith numerous applications, m-files, and practical examples to problems. Balancing theoretical concepts withcomputational speed and accuracy, the book includes numerous short programs in MATLAB that can be used to solveproblems involving first-and higher-order differential equations, Laplace transforms, linear systems of differentialequations, numerical solutions of differential equations, computer graphics, and more. The author emphasizes thebasic ideas of analytical and numerical techniques and the uses of modern mathematical software (MATLAB) ratherthan relying only on complex mathematical derivations to engineers, mathematician, computer scientists, andphysicists or for use as a textbook in applied or computational courses.A CD-ROM with all the figures, codes, solutions, appendices...

  7. Learning Matlab a problem solving approach

    CERN Document Server

    Gander, Walter

    2015-01-01

    This comprehensive and stimulating introduction to Matlab, a computer language now widely used for technical computing, is based on an introductory course held at Qian Weichang College, Shanghai University, in the fall of 2014.  Teaching and learning a substantial programming language aren’t always straightforward tasks. Accordingly, this textbook is not meant to cover the whole range of this high-performance technical programming environment, but to motivate first- and second-year undergraduate students in mathematics and computer science to learn Matlab by studying representative problems, developing algorithms and programming them in Matlab. While several topics are taken from the field of scientific computing, the main emphasis is on programming. A wealth of examples are completely discussed and solved, allowing students to learn Matlab by doing: by solving problems, comparing approaches and assessing the proposed solutions.

  8. Linear algebra applications using Matlab software

    Directory of Open Access Journals (Sweden)

    Cornelia Victoria Anghel

    2005-10-01

    Full Text Available The paper presents two ways of special matrix generating using some functions included in the MatLab software package. The MatLab software package contains a set of functions that generate special matrixes used in the linear algebra applications and the signal processing from different activity fields. The paper presents two tipes of special matrixes that can be generated using written sintaxes in the dialog window of the MatLab software and for the command validity we need to press the Enter task. The applications presented in the paper represent eamples of numerical calculus using the MatLab software and belong to the scientific field „Computer Assisted Mathematics” thus creating the symbiosis between mathematics and informatics.

  9. MOCCASIN: converting MATLAB ODE models to SBML.

    Science.gov (United States)

    Gómez, Harold F; Hucka, Michael; Keating, Sarah M; Nudelman, German; Iber, Dagmar; Sealfon, Stuart C

    2016-06-15

    MATLAB is popular in biological research for creating and simulating models that use ordinary differential equations (ODEs). However, sharing or using these models outside of MATLAB is often problematic. A community standard such as Systems Biology Markup Language (SBML) can serve as a neutral exchange format, but translating models from MATLAB to SBML can be challenging-especially for legacy models not written with translation in mind. We developed MOCCASIN (Model ODE Converter for Creating Automated SBML INteroperability) to help. MOCCASIN can convert ODE-based MATLAB models of biochemical reaction networks into the SBML format. MOCCASIN is available under the terms of the LGPL 2.1 license (http://www.gnu.org/licenses/lgpl-2.1.html). Source code, binaries and test cases can be freely obtained from https://github.com/sbmlteam/moccasin : mhucka@caltech.edu More information is available at https://github.com/sbmlteam/moccasin. © The Author 2016. Published by Oxford University Press.

  10. A Matlab program for stepwise regression

    Directory of Open Access Journals (Sweden)

    Yanhong Qi

    2016-03-01

    Full Text Available The stepwise linear regression is a multi-variable regression for identifying statistically significant variables in the linear regression equation. In present study, we presented the Matlab program of stepwise regression.

  11. Visual media processing using Matlab beginner's guide

    CERN Document Server

    Siogkas, George

    2013-01-01

    Written in a friendly, Beginner's Guide format, showing the user how to use the digital media aspects of Matlab (image, video, sound) in a practical, tutorial-based style.This is great for novice programmers in any language who would like to use Matlab as a tool for their image and video processing needs, and also comes in handy for photographers or video editors with even less programming experience wanting to find an all-in-one tool for their tasks.

  12. Reflections on the different sides of idleness in contemporary times

    Directory of Open Access Journals (Sweden)

    Patrícia Zaczuk Bassinello

    2015-04-01

    Full Text Available Over the last century, idleness experienced a modernization and democratization process especially with the crisis of a society focused on work – the post-Industrial Revolution - and the emergence of new ideas that put the free time, the leisure and recreation in the role of structural elements of the new social context and like tools for the new ways of life. In this work, we we seek to focus on the significant aspects of reality and function of leisure in our time, clarifying their relationship with the processes of personal, social and economic innovation by establishing a balance of our acts in thinking the leisure and work and leisure and life from different angles of approach. In order to analyze this phenomenon, we were based on scientific sources which are representative in the context, and then we elaborated a general overview of the subject from the contributions of the bakhtinian perspectives. We observed that the increase in leisure options in the last decades of the twentieth century, along with the growth of the studies of the idleness phenomenon and its possibilities, allowed an evolution of its concepts, from activities or practices associated to the consumption and to digital entertainment, to its understanding as an experience whose key of the discussion is the subject living these experiences. We believe that this reflection about idleness may open possibilities of a better comprehension of its insertion in the social and human sciences field and, especially, in its contribution to a new attitude of the relational production, centered on the subject, which stimulates a society that creates and innovates goods and services and who deepens the studies of leisure from the dynamic experiential horizon to the right to the otherness and to its time – the own one and the others’ – such as "the right to unfunctionality", from listening to the other word.

  13. Chapter 29: Using an Existing Environment in the VO (IDL)

    Science.gov (United States)

    Miller, C. J.

    The local environment of a Brightest Cluster Galaxy (BCG) can provide insight into the (still not understood) formation process of the BCG itself. BCGs are the most massive galaxies in the Universe, and their formation and evolution are a popular and current research topic (Linden et al. 2006, Bernardi et al. 2006, Lauer et al. 2006). They have been studied for some time (Sandage 1972, Ostriker & Tremaine 1975, White 1976, Thuan & Romanishin 1981, Merritt 1985, Postman and Lauer 1995, among many others). Our goal in this chapter is to study how the local environment can affect the physical and measurable properties of BCGs. We will conduct an exploratory research exercise. In this chapter, we will show how the Virtual Observatory (VO) can be effectively utilized for doing modern scientific research on BCGs. We identify the scientific functionalities we need, the datasets we require, and the service locations in order to discover and access those data. This chapter utilizes IDL's VOlib, which is described in Chapter 24 of this book and is available at http://www.nvo.noao.edu. IDL provides the capability to perform the entire range of astronomical scientific analyses in one environment: from image reduction and analysis to complex catalog manipulations, statistics, and publication quality figures. At the 2005 and 2006 NVO Summer Schools, user statistics show that IDL was the most commonly used programming language by the students (nearly 3-to-1 over languages like IRAF, Perl, and Python). In this chapter we show how the integration of IDL to the VO through VOlib provides even greater capabilities and possibilities for conducting science in the era of the Virtual Observatory. The reader should familiarize themselves with the VOlib libraries before attempting the examples in this tutorial. We first build a research plan. We then discover the service URLs we will need to access the data. We then apply the necessary functions and tools to these data before we can do our

  14. Internet Connection Control based on Idle Time Using User Behavior Pattern Analysis

    Directory of Open Access Journals (Sweden)

    Fadilah Fahrul Hardiansyah

    2014-12-01

    Full Text Available The increase of smartphone ability is rapidly increasing the power consumption. Many methods have been proposed to reduce smartphone power consumption. Most of these methods use the internet connection control based on the availability of the battery power level regardless of when and where a waste of energy occurs. This paper proposes a new approach to control the internet connection based on idle time using user behavior pattern analysis. User behavior patterns are used to predict idle time duration. Internet connection control performed during idle time. During idle time internet connection periodically switched on and off by a certain time interval. This method effectively reduces a waste of energy. Control of the internet connection does not interfere the user because it is implemented on idle time. Keywords: Smartphone, User Behavior, Pattern Recognition, Idle Time, Internet Connection Control

  15. The downside of downtime: The prevalence and work pacing consequences of idle time at work

    OpenAIRE

    Brodsky, Andrew; Amabile, Teresa M.

    2018-01-01

    Although both media commentary and academic research have focused much attention on the dilemma of employees being too busy, this paper presents evidence of the opposite phenomenon, in which employees do not have enough work to fill their time and are left with hours of meaningless idle time each week. We conducted six studies that examine the prevalence and work pacing consequences of involuntary idle time. In a nationally representative cross-occupational survey (Study 1), we found that idl...

  16. Experimental and numerical investigation of idling car exposure

    Energy Technology Data Exchange (ETDEWEB)

    McNabola, A; Broderick, B M; Gill, L W [Trinity College, Dublin (Ireland). Dept. of Civil, Structural, and Environmental Engineering

    2006-07-01

    This study examined the effect of maintaining a 2 metre distance between vehicles on commuter pollution exposure levels. Air quality samples were recorded inside cars on a busy road in Dublin. A turbulent dispersion model was used to predict the exposure levels from idling cars. Samples were recorded along the route by keeping a distance of approximately 2 metres by sight to the car in front, and then a second time keeping a distance of approximately 1 meter. Traffic numbers were recorded during each sample from local authority loops. Meteorological and idling time data were also recorded for a total of 10 pairs of samples. Experiments were then conducted to measure volatile organic compounds (VOCs) and particulate matter (PM{sub 2.5}). A calibrated computational fluid dynamics (CFD) model was then used to predict car exposure levels under varying conditions. Key parameters included ventilation rates; wind speed; and distance. The calibrated numerical model demonstrated that the pollution concentration decreased rapidly within the first 2 metres of the preceding exhaust. Maintaining a distance of 2 metres to the preceding vehicle showed a reduction in VOCs and particulate matter of approximately 30 to 40 per cent. It was concluded that further research is needed to determine if modified driving behaviours will promote higher levels of traffic congestion. 11 refs., 6 tabs., 11 figs.

  17. MATLAB Software Versions and Licenses for the Peregrine System |

    Science.gov (United States)

    High-Performance Computing | NREL MATLAB Software Versions and Licenses for the Peregrine System MATLAB Software Versions and Licenses for the Peregrine System Learn about the MATLAB software Peregrine is R2017b. Licenses MATLAB is proprietary software. As such, users have access to a limited number

  18. An Accelerator Control Middle Layer Using MATLAB

    International Nuclear Information System (INIS)

    Portmann, Gregory J.; Corbett, Jeff; Terebilo, Andrei

    2005-01-01

    Matlab is an interpretive programming language originally developed for convenient use with the LINPACK and EISPACK libraries. Matlab is appealing for accelerator physics because it is matrix-oriented, provides an active workspace for system variables, powerful graphics capabilities, built-in math libraries, and platform independence. A number of accelerator software toolboxes have been written in Matlab -- the Accelerator Toolbox (AT) for model-based machine simulations, LOCO for on-line model calibration, and Matlab Channel Access (MCA) to connect with EPICS. The function of the MATLAB ''MiddleLayer'' is to provide a scripting language for machine simulations and on-line control, including non-EPICS based control systems. The MiddleLayer has simplified and streamlined development of high-level applications including configuration control, energy ramp, orbit correction, photon beam steering, ID compensation, beam-based alignment, tune correction and response matrix measurement. The database-driven Middle Layer software is largely machine-independent and easy to port. Six accelerators presently use the software package with more scheduled to come on line soon

  19. Discretization errors at free boundaries of the Grad-Schlueter-Shafranov equation

    International Nuclear Information System (INIS)

    Meyer-Spasche, R.; Fornberg, B.

    1990-10-01

    The numerical error of standard finite-difference schemes is analyzed at free boundaries of the Grad-Schlueter-Shafranov equation of plasma physics. A simple correction strategy is devised to eliminate (to leading order) the errors which arise as the free boundary crosses the rectangular grid at irregular locations. The resulting scheme can be solved by Gauss-Newton or Inverse iterations, or by multigrid iterations. Extrapolation (from 2nd to 3rd order of accuracy) is possible for the new scheme. (orig.)

  20. Futur d'une infrastructure de correction automatisée : CodeGradX

    OpenAIRE

    Queinnec , Christian; Pons , Olivier

    2016-01-01

    Cet article évoque quelques expériences et nouvelles idées au-tour d'une infrastructure de correction automatisée de programmes. CodeGradX est une infrastructure de correction automatisée de programmes. Elle est en service depuis 2008 (initialement sous le nom de FW4EX) et a depuis corrigé plus de 150 000 soumissions d'étudiants à des exercices principalement en Scheme, utilitaires d'Unix, JavaScript mais aussi en C, Octave, O'Caml, Python sans oublier les compétitions annuelles des Journées ...

  1. VMOMS: a computer code for finding moment solutions to the Grad-Shafranov equation

    International Nuclear Information System (INIS)

    Lao, L.L.; Wieland, R.M.; Houlberg, W.A.; Hirshman, S.P.

    1982-02-01

    A code VMOMS is described which finds approximate solutions to the Grad-Shafranov equation describing scalar pressure-balance equilibria for axisymmetric tokamak plasmas. A Fourier series expansion of the flux surface coordinates (R,Z) is made in terms of two new coordinates (rho, theta), and the resulting equation is conveniently reduced to a system of ordinary differential equations (ODE's) using a variational principle. The solution of these simple equations with pressure and current as driving functions, yields, in principle, a complete description of the equilibrium. Complete axisymmetry is assumed, as well as up-down symmetry about the toroidal midplane

  2. Complex of GRAD programs for analytical calculation of radiation defects generation in solids

    International Nuclear Information System (INIS)

    Suvorov, A.L.; Zabolotnyj, V.T.; Babaev, V.P.

    1989-01-01

    Complex of programms for analytical calculation of generation of radiation defects (GRAD) in solids, and also of their recombination during cascade area relaxation and postradiation annealing, of mass removing by atomic collisions in volume (mixing) and through the surface (sputtering), of structure - phase state and property changes is suggested. The complex volume is less than 10 KBytes and it may be realized by computer of any type. Satisfactional agreement with more wide range of experimental data in comparison with tradition models is obtained. 27 refs.; 2 figs

  3. Efficient augmented Lagrangian-type preconditioning for the Oseen problem using Grad-Div stabilization

    KAUST Repository

    Heister, Timo

    2012-01-29

    Efficient preconditioning for Oseen-type problems is an active research topic. We present a novel approach leveraging stabilization for inf-sup stable discretizations. The Grad-Div stabilization shares the algebraic properties with an augmented Lagrangian-type term. Both simplify the approximation of the Schur complement, especially in the convection-dominated case. We exploit this for the construction of the preconditioner. Solving the discretized Oseen problem with an iterative Krylov-type method shows that the outer iteration numbers are retained independent of mesh size, viscosity, and finite element order. Thus, the preconditioner is very competitive. © 2012 John Wiley & Sons, Ltd.

  4. Efficient augmented Lagrangian-type preconditioning for the Oseen problem using Grad-Div stabilization

    KAUST Repository

    Heister, Timo; Rapin, Gerd

    2012-01-01

    Efficient preconditioning for Oseen-type problems is an active research topic. We present a novel approach leveraging stabilization for inf-sup stable discretizations. The Grad-Div stabilization shares the algebraic properties with an augmented Lagrangian-type term. Both simplify the approximation of the Schur complement, especially in the convection-dominated case. We exploit this for the construction of the preconditioner. Solving the discretized Oseen problem with an iterative Krylov-type method shows that the outer iteration numbers are retained independent of mesh size, viscosity, and finite element order. Thus, the preconditioner is very competitive. © 2012 John Wiley & Sons, Ltd.

  5. Notes from the church of the Virgin at the island of Mali grad

    Directory of Open Access Journals (Sweden)

    Cvetkovski Sašo

    2010-01-01

    Full Text Available In this text the unknown parts of the wall paintings from the Church of the Virgin at the island of Mali Grad (The Great Prespa Lake are analyzed: the figure of a monk praying to St. Paraskeve, on the southern wall of the nave, as well as the painting on the southern faüade with the depictions of St. George on horseback, the Virgin as Empress enthroned, and the bust of two saints, St. Paraskeve and St. Nicholas. The monk is identified with the hegoumenos Jona, mentioned in the donor’s inscription dating from 1369.

  6. Practical image and video processing using MATLAB

    CERN Document Server

    Marques, Oge

    2011-01-01

    "The book provides a practical introduction to the most important topics in image and video processing using MATLAB (and its Image Processing Toolbox) as a tool to demonstrate the most important techniques and algorithms. The contents are presented in a clear, technically accurate, objective way, with just enough mathematical detail. Most of the chapters are supported by figures, examples, illustrative problems, MATLAB scripts, suggestions for further reading, bibliographical references, useful Web sites, and exercises and computer projects to extend the understanding of their contents"--

  7. Aplikasi MATLAB untuk Mengenali Karakter Tulisan Tangan

    Directory of Open Access Journals (Sweden)

    ali mahmudi

    2017-03-01

    Full Text Available Handwriting recognition is one of the very interesting research object in the field of image processing, artificial intelligence and computer vision. This is due to the handwritten characters is varied in every individual. The style, size and orientation of handwriting characters has made every body’s is different, hence handwriting recognition is a very interesting research object. Handwriting recognition application has been used in quite many applications, such as reading the bank deposits, reading the postal code in letters, and helping peolple in managing documents. This paper presents a handwriting recognition application using Matlab. Matlab toolbox that is used in this research are Image Processing and Neural Network Toolbox.

  8. Conceptualization of Idle (Laghw) and its relation to medical futility.

    Science.gov (United States)

    Rezaei Aderyani, Mohsen; Javadi, Mohsen; Nazari Tavakkoli, Saeid; Kiani, Mehrzad; Abbasi, Mahmood

    2016-01-01

    A major debate in medical ethics is the request for futile treatment. The topic of medical futility requires discrete assessment in Iran for at least two reasons. First, the common principles and foundations of medical ethics have taken shape in the context of Western culture and secularism. Accordingly, the implementation of the same guidelines and codes of medical ethics as Western societies in Muslim communities does not seem rational. Second, the challenges arising in health service settings are divergent across different countries. The Quranic concept of idle (laghw) and its derivatives are used in 11 honorable verses of the Holy Quran. Among these verses, the 3rd verse of the blessed Al-Muminūn Surah was selected for its closer connection to the concept under examination. The selected verse was researched in the context of all dictionaries presented in Noor Jami` al-Tafasir 2 (The Noor Collection of Interpretations 2) software. "Idle" is known as any insignificant speech, act, or thing that is not beneficial; an action from which no benefit is gained; any falsehood (that is not stable or realized); an entertaining act; any foul, futile talk and action unworthy of attention; loss of hope; and something that is not derived from method and thought. The word has also been used to refer to anything insignificant. The notes and derived interpretations were placed in the following categories: A) Having no significant benefit (When medical care does not benefit the patient (his body and/or soul and his life in this world and/or the Hereafter), it is wrong to proceed with that medical modality; B) Falsehood (Actions that fail to provide, maintain, and improve health are clearly futile); C) Unworthy of attention (An action that neither improves health nor threatens it is wrong and impermissible).

  9. Iterative solution of the Grad-Shafranov equation in symmetric magnetic coordinates

    International Nuclear Information System (INIS)

    Brambilla, Marco

    2003-01-01

    The inverse Grad-Shafranov equation for axisymmetric magnetohydrodynamic equilibria is reformulated in symmetric magnetic coordinates (in which magnetic field lines look 'straight', and the geometric toroidal angle is one of the coordinates). The poloidally averaged part of the equilibrium condition and Ampere law takes the form of two first-order ordinary differential equations, with the two arbitrary flux functions, pressure and force-free part of the current density, as sources. The condition for the coordinates to be flux coordinates, and the poloidally varying part of the equilibrium equation are similarly transformed into a set of first-order ordinary differential equations, with coefficients depending on the metric, and explicitly solved for the radial derivatives of the coefficients of the Fourier representation of the Cartesian coordinates in the poloidal angle. The derivation exploits the existence of Boozer-White coordinates, but does not require to find these coordinates explicitly; on the other hand, it offers a simple recipe to perform the transformation to Boozer-White coordinates, if required. Use of symmetric flux coordinates is advantageous for the formulation of many problems of equilibrium, stability, and wave propagation in tokamak plasmas, since these coordinates have the simplest metric of their class. It is also shown that in symmetric flux coordinates the Lagrangian equations of the drift motion of charged particles are automatically solved for the time derivatives, with right-hand sides closely related to the coefficients of the inverse Grad-Shafranov equation

  10. Derivation of regularized Grad's moment system from kinetic equations: modes, ghosts and non-Markov fluxes

    Science.gov (United States)

    Karlin, Ilya

    2018-04-01

    Derivation of the dynamic correction to Grad's moment system from kinetic equations (regularized Grad's 13 moment system, or R13) is revisited. The R13 distribution function is found as a superposition of eight modes. Three primary modes, known from the previous derivation (Karlin et al. 1998 Phys. Rev. E 57, 1668-1672. (doi:10.1103/PhysRevE.57.1668)), are extended into the nonlinear parameter domain. Three essentially nonlinear modes are identified, and two ghost modes which do not contribute to the R13 fluxes are revealed. The eight-mode structure of the R13 distribution function implies partition of R13 fluxes into two types of contributions: dissipative fluxes (both linear and nonlinear) and nonlinear streamline convective fluxes. Physical interpretation of the latter non-dissipative and non-local in time effect is discussed. A non-perturbative R13-type solution is demonstrated for a simple Lorentz scattering kinetic model. The results of this study clarify the intrinsic structure of the R13 system. This article is part of the theme issue `Hilbert's sixth problem'.

  11. Grad-Shafranov reconstruction: overview and improvement of the numerical solution used in space physics

    Energy Technology Data Exchange (ETDEWEB)

    Ojeda Gonzalez, A.; Domingues, M.O.; Mendes, O., E-mail: ojeda.gonzalez.a@gmail.com [Instituto Nacional de Pesquisas Espaciais (INPE), Sao Jose dos Campos, SP (Brazil); Kaibara, M.K. [Universidade Federal Fluminense (GMA/IME/UFF), Niteroi, RJ (Brazil); Prestes, A. [Universidade do Vale do Paraiba (IP and D/UNIVAP), Sao Jose dos Campos, SP (Brazil). Lab. de Fisica e Astronomia

    2015-10-15

    The Grad-Shafranov equation is a Poisson's equation, i.e., a partial differential equation of elliptic type. The problem is depending on the initial condition and can be treated as a Cauchy problem. Although it is ill-posed or ill-conditioned, it can be integrated numerically. In the integration of the GS equation, singularities with large values of the potential arise after a certain number of integration steps away from the original data line, and a filter should be used. The Grad-Shafranov reconstruction (GSR) technique was developed from 1996 to 2000 for recovering two-dimensional structures in the magnetopause in an ideal MHD formulation. Other works have used the GSR techniques to study magnetic flux ropes in the solar wind and in the magnetotail from a single spacecraft dataset; posteriorly, it was extended to treat measurements from multiple satellites. From Vlasov equation, it is possible to arrive at the GS-equation in function of the normalized vector potential. A general solution is obtained using complex variable theory. A specific solution was chosen as benchmark case to solve numerically the GS equation.We propose some changes in the resolution scheme of the GS equation to improve the solution. The result of each method is compared with the solution proposed by Hau and Sonnerup (J. Geophys. Res. 104(A4), 6899-6917 (1999)). The main improvement found in the GS resolution was the need to filter Bx values at each y value. (author)

  12. Extending the Operational Envelope of a Turbofan Engine Simulation into the Sub-Idle Region

    Science.gov (United States)

    Chapman, Jeffryes Walter; Hamley, Andrew J.; Guo, Ten-Huei; Litt, Jonathan S.

    2016-01-01

    In many non-linear gas turbine simulations, operation in the sub-idle region can lead to model instability. This paper lays out a method for extending the operational envelope of a map based gas turbine simulation to include the sub-idle region. This method develops a multi-simulation solution where the baseline component maps are extrapolated below the idle level and an alternate model is developed to serve as a safety net when the baseline model becomes unstable or unreliable. Sub-idle model development takes place in two distinct operational areas, windmilling/shutdown and purge/cranking/startup. These models are based on derived steady state operating points with transient values extrapolated between initial (known) and final (assumed) states. Model transitioning logic is developed to predict baseline model sub-idle instability, and transition smoothly and stably to the backup sub-idle model. Results from the simulation show a realistic approximation of sub-idle behavior as compared to generic sub-idle engine performance that allows the engine to operate continuously and stably from shutdown to full power.

  13. Costly myths. An analysis of idling beliefs and behavior in personal motor vehicles

    International Nuclear Information System (INIS)

    Carrico, Amanda R.; Padgett, Paul; Vandenbergh, Michael P.; Gilligan, Jonathan; Wallston, Kenneth A.

    2009-01-01

    Despite the large contribution of individuals and households to climate change, little has been done in the US to reduce the CO 2 emissions attributable to this sector. Motor vehicle idling among individual private citizens is one behavior that may be amenable to large-scale policy interventions. Currently, little data are available to quantify the potential reductions in emissions that could be realized by successful policy interventions. In addition, little is known about the motivations and beliefs that underlie idling. In the fall of 2007, 1300 drivers in the US were surveyed to assess typical idling practices, beliefs and motivations. Results indicate that the average individual idled for over 16 min a day and believed that a vehicle can be idled for at least 3.6 min before it is better to turn it off. Those who held inaccurate beliefs idled, on average, over 1 min longer than the remainder of the sample. These data suggest that idling accounts for over 93 MMt of CO 2 and 10.6 billion gallons (40.1 billion liters) of gasoline a year, equaling 1.6% of all US emissions. Much of this idling is unnecessary and economically disadvantageous to drivers. The policy implications of these findings are discussed. (author)

  14. Summary of OEM Idling Recommendations from Vehicle Owner's Manuals

    Energy Technology Data Exchange (ETDEWEB)

    Keel-Blackmon, Kristy [East Tennessee Clean Fuels Coalition (ETCleanFuels), Knoxville, TN (United States); Curran, Scott [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lapsa, Melissa Voss [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-01-01

    The project upon which this report is based was conceived in 2012 during discussions between the East Tennessee Clean Fuels Coalition (ETCleanFuels) and Oak Ridge National Laboratory (ORNL) who both noted that a detailed summary of idling recommendations for a wide variety of engines and vehicles were not available in the literature. The two organizations agreed that ETCleanFuels would develop a first-of-its-kind collection of idling recommendations from the owner’s manuals of modern production vehicles. Vehicle engine idling, a subject that has long been debated, is largely shrouded in misinformation. The justifications for idling seem to be many: driver comfort, waiting in lines, and talking on cell phones to name a few. Assuredly, a great number of people idle because of the myths and misinformation surrounding this issue. This report addresses these myths by turning to statements taken directly from the automobile and engine manufacturers themselves.

  15. Radar signal analysis and processing using Matlab

    CERN Document Server

    Mahafza, Bassem R

    2008-01-01

    Offering radar-related software for the analysis and design of radar waveform and signal processing, this book provides comprehensive coverage of radar signals and signal processing techniques and algorithms. It contains numerous graphical plots, common radar-related functions, table format outputs, and end-of-chapter problems. The complete set of MATLAB[registered] functions and routines are available for download online.

  16. A Total Factor Productivity Toolbox for MATLAB

    NARCIS (Netherlands)

    B.M. Balk (Bert); J. Barbero (Javier); J.L. Zofío (José)

    2018-01-01

    textabstractTotal Factor Productivity Toolbox is a new package for MATLAB that includes functions to calculate the main Total Factor Productivity (TFP) indices and their decompositions, based on Shephard’s distance functions and using Data Envelopment Analysis (DEA) programming techniques. The

  17. How to Interface Fortran with Matlab

    OpenAIRE

    Sagastizábal , Claudia; Vige , Guillaume

    1995-01-01

    Projet PROMATH; We describe the general procedure for interfacing Fortran routines with Matlab. We explain how to write a mex-file and the associated gateway function. In particular, each different type of argument is considered in detail. We finish with an illustrative example

  18. An Accelerator Control Middle Layer Using MATLAB

    International Nuclear Information System (INIS)

    Portmann, Gregory J.; Corbett, Jeff; Terebilo, Andrei

    2005-01-01

    Matlab is a matrix manipulation language originally developed to be a convenient language for using the LINPACK and EISPACK libraries. What makes Matlab so appealing for accelerator physics is the combination of a matrix oriented programming language, an active workspace for system variables, powerful graphics capability, built-in math libraries, and platform independence. A number of software toolboxes for accelerators have been written in Matlab--the Accelerator Toolbox (AT) for machine simulations, LOCO for accelerator calibration, Matlab Channel Access Toolbox (MCA) for EPICS connections, and the Middle Layer. This paper will describe the ''middle layer'' software toolbox that resides between the high-level control applications and the low-level accelerator control system. This software was a collaborative effort between ALS (LBNL) and SPEAR3 (SSRL) but easily ports to other machines. Five accelerators presently use this software. The high-level Middle Layer functionality includes energy ramp, configuration control (save/restore), global orbit correction, local photon beam steering, insertion device compensation, beam-based alignment, tune correction, response matrix measurement, and script-based programs for machine physics studies

  19. Accelerating MATLAB with GPU computing a primer with examples

    CERN Document Server

    Suh, Jung W

    2013-01-01

    Beyond simulation and algorithm development, many developers increasingly use MATLAB even for product deployment in computationally heavy fields. This often demands that MATLAB codes run faster by leveraging the distributed parallelism of Graphics Processing Units (GPUs). While MATLAB successfully provides high-level functions as a simulation tool for rapid prototyping, the underlying details and knowledge needed for utilizing GPUs make MATLAB users hesitate to step into it. Accelerating MATLAB with GPUs offers a primer on bridging this gap. Starting with the basics, setting up MATLAB for

  20. Experiences with Matlab and VRML in Functional Neuroimaging Visualizations

    DEFF Research Database (Denmark)

    Nielsen, Finn Årup; Hansen, Lars Kai

    2000-01-01

    We describe some experiences with Matlab and VRML. We are developing a toolbox for neuroinformatics and describe some of the functionalities we have implemented or will implement and how Matlab and VRML support the implementation....

  1. On the Boltzmann-Grad Limit for Smooth Hard-Sphere Systems

    Science.gov (United States)

    Tessarotto, Massimo; Cremaschini, Claudio; Mond, Michael; Asci, Claudio; Soranzo, Alessandro; Tironi, Gino

    2018-03-01

    The problem is posed of the prescription of the so-called Boltzmann-Grad limit operator (L_{BG}) for the N-body system of smooth hard-spheres which undergo unary, binary as well as multiple elastic instantaneous collisions. It is proved, that, despite the non-commutative property of the operator L_{BG}, the Boltzmann equation can nevertheless be uniquely determined. In particular, consistent with the claim of Uffink and Valente (Found Phys 45:404, 2015) that there is "no time-asymmetric ingredient" in its derivation, the Boltzmann equation is shown to be time-reversal symmetric. The proof is couched on the "ab initio" axiomatic approach to the classical statistical mechanics recently developed (Tessarotto et al. in Eur Phys J Plus 128:32, 2013). Implications relevant for the physical interpretation of the Boltzmann H-theorem and the phenomenon of decay to kinetic equilibrium are pointed out.

  2. The downside of downtime: The prevalence and work pacing consequences of idle time at work.

    Science.gov (United States)

    Brodsky, Andrew; Amabile, Teresa M

    2018-05-01

    Although both media commentary and academic research have focused much attention on the dilemma of employees being too busy, this paper presents evidence of the opposite phenomenon, in which employees do not have enough work to fill their time and are left with hours of meaningless idle time each week. We conducted six studies that examine the prevalence and work pacing consequences of involuntary idle time. In a nationally representative cross-occupational survey (Study 1), we found that idle time occurs frequently across all occupational categories; we estimate that employers in the United States pay roughly $100 billion in wages for time that employees spend idle. Studies 2a-3b experimentally demonstrate that there are also collateral consequences of idle time; when workers expect idle time following a task, their work pace declines and their task completion time increases. This decline reverses the well-documented deadline effect, producing a deadtime effect, whereby workers slow down as a task progresses. Our analyses of work pace patterns provide evidence for a time discounting mechanism: workers discount idle time when it is relatively distant, but act to avoid it increasingly as it becomes more proximate. Finally, Study 4 demonstrates that the expectation of being able to engage in leisure activities during posttask free time (e.g., surfing the Internet) can mitigate the collateral work pace losses due to idle time. Through examination and discussion of the effects of idle time at work, we broaden theory on work pacing. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  3. Charting a Path to Graduation. The Effect of Project GRAD on Elementary School Student Outcomes in Four Urban School Districts

    Science.gov (United States)

    Snipes, Jason C.; Holton, Glee Ivory; Doolittle, Fred

    2006-01-01

    In the past decade, school districts around the country have sought to improve struggling urban high schools, where high dropout rates, poor student achievement, and low rates of graduation and college-going remain all too prevalent. In a field crowded with reform initiatives, Project Graduation Really Achieves Dreams (GRAD) stands out as…

  4. Building a Grad Nation: Progress and Challenge in Ending the High School Dropout Epidemic. Annual Update, 2012

    Science.gov (United States)

    Balfanz, Robert; Bridgeland, John M.; Bruce, Mary; Fox, Joanna Hornig

    2012-01-01

    In 2010, the authors shared a Civic Marshall Plan to create a Grad Nation. Through that first report and subsequent update, they saw hopeful signs of progress in boosting high school graduation rates in communities across the country. This 2012 report shows that high school graduation rates continue to improve nationally and across many states and…

  5. Application of MATLAB in testing digital power supply controllers

    International Nuclear Information System (INIS)

    Ke Xinhua; Chinese Academy of Sciences, Beijing; Lu Songlin; Shen Tianjian

    2008-01-01

    Based on introducing MATLAB SISOTOOL in MATLAB control box and the magnet power supply system in detail, this paper presented the application of MATLAB SISOTOOL in Testing Digital Power Supply controllers. This control tool should be popularized because of its characteristics of convenience and easy-to-use. (authors)

  6. Development of 1D Liner Compression Code for IDL

    Science.gov (United States)

    Shimazu, Akihisa; Slough, John; Pancotti, Anthony

    2015-11-01

    A 1D liner compression code is developed to model liner implosion dynamics in the Inductively Driven Liner Experiment (IDL) where FRC plasmoid is compressed via inductively-driven metal liners. The driver circuit, magnetic field, joule heating, and liner dynamics calculations are performed at each time step in sequence to couple these effects in the code. To obtain more realistic magnetic field results for a given drive coil geometry, 2D and 3D effects are incorporated into the 1D field calculation through use of correction factor table lookup approach. Commercial low-frequency electromagnetic fields solver, ANSYS Maxwell 3D, is used to solve the magnetic field profile for static liner condition at various liner radius in order to derive correction factors for the 1D field calculation in the code. The liner dynamics results from the code is verified to be in good agreement with the results from commercial explicit dynamics solver, ANSYS Explicit Dynamics, and previous liner experiment. The developed code is used to optimize the capacitor bank and driver coil design for better energy transfer and coupling. FRC gain calculations are also performed using the liner compression data from the code for the conceptual design of the reactor sized system for fusion energy gains.

  7. Introduction to fuzzy logic using Matlab

    CERN Document Server

    Sivanandam, SN; Deepa, S N

    2006-01-01

    Fuzzy Logic, at present is a hot topic, among academicians as well various programmers. This book is provided to give a broad, in-depth overview of the field of Fuzzy Logic. The basic principles of Fuzzy Logic are discussed in detail with various solved examples. The different approaches and solutions to the problems given in the book are well balanced and pertinent to the Fuzzy Logic research projects. The applications of Fuzzy Logic are also dealt to make the readers understand the concept of Fuzzy Logic. The solutions to the problems are programmed using MATLAB 6.0 and the simulated results are given. The MATLAB Fuzzy Logic toolbox is provided for easy reference.

  8. MATLAB tensor classes for fast algorithm prototyping.

    Energy Technology Data Exchange (ETDEWEB)

    Bader, Brett William; Kolda, Tamara Gibson (Sandia National Laboratories, Livermore, CA)

    2004-10-01

    Tensors (also known as mutidimensional arrays or N-way arrays) are used in a variety of applications ranging from chemometrics to psychometrics. We describe four MATLAB classes for tensor manipulations that can be used for fast algorithm prototyping. The tensor class extends the functionality of MATLAB's multidimensional arrays by supporting additional operations such as tensor multiplication. The tensor as matrix class supports the 'matricization' of a tensor, i.e., the conversion of a tensor to a matrix (and vice versa), a commonly used operation in many algorithms. Two additional classes represent tensors stored in decomposed formats: cp tensor and tucker tensor. We descibe all of these classes and then demonstrate their use by showing how to implement several tensor algorithms that have appeared in the literature.

  9. A study experiment of auto idle application in the excavator engine performance

    Energy Technology Data Exchange (ETDEWEB)

    Purwanto, Wawan, E-mail: wawan5527@gmail.com; Maksum, Hasan; Putra, Dwi Sudarno, E-mail: dwisudarnoputra@ft.unp.ac.id; Wahyudi, Retno [State University of Padang, West Sumatera (Indonesia); Azmi, Meri, E-mail: meriazmi@gmail.com [State Polytechnic of Padang, West Sumatera (Indonesia)

    2016-03-29

    The purpose of this study was to analyze the effect of applying auto idle to excavator engine performance, such as machine unitization and fuel consumption in Excavator. Steps to be done are to modify the system JA 44 and 67 in Vehicle Electronic Control Unit (V-ECU). The modifications will be obtained from the pattern of the engine speed. If the excavator attachment is not operated, the engine speed will return to the idle speed automatically. From the experiment results the auto idle reduces fuel consumption in excavator engine.

  10. Intelligent traffic lights based on MATLAB

    Science.gov (United States)

    Nie, Ying

    2018-04-01

    In this paper, I describes the traffic lights system and it has some. Through analysis, I used MATLAB technology, transformed the camera photographs into digital signals. Than divided the road vehicle is into three methods: very congestion, congestion, a little congestion. Through the MCU programming, solved the different roads have different delay time, and Used this method, saving time and resources, so as to reduce road congestion.

  11. Nuclear Fuel Depletion Analysis Using Matlab Software

    Science.gov (United States)

    Faghihi, F.; Nematollahi, M. R.

    Coupled first order IVPs are frequently used in many parts of engineering and sciences. In this article, we presented a code including three computer programs which are joint with the Matlab software to solve and plot the solutions of the first order coupled stiff or non-stiff IVPs. Some engineering and scientific problems related to IVPs are given and fuel depletion (production of the 239Pu isotope) in a Pressurized Water Nuclear Reactor (PWR) are computed by the present code.

  12. Directional quantile regression in Octave (and MATLAB)

    Czech Academy of Sciences Publication Activity Database

    Boček, Pavel; Šiman, Miroslav

    2016-01-01

    Roč. 52, č. 1 (2016), s. 28-51 ISSN 0023-5954 R&D Projects: GA ČR GA14-07234S Institutional support: RVO:67985556 Keywords : quantile regression * multivariate quantile * depth contour * Matlab Subject RIV: IN - Informatics, Computer Science Impact factor: 0.379, year: 2016 http://library.utia.cas.cz/separaty/2016/SI/bocek-0458380.pdf

  13. Implementation of Digital Watermarking Using MATLAB Software

    OpenAIRE

    Karnpriya Vyas; Kirti Sethiya; Sonu Jain

    2012-01-01

    Digital watermarking holds significant promise as one of the keys to protecting proprietary digital content in the coming years. It focuses on embedding information inside a digital object such that the embedded information is in separable bound to the object. The proposed scheme has been implemented on MATLAB, as it is a high level technical computing language and interactive environment for algorithm development, data visualization, data analysis, and numerical computation. We w...

  14. Matlab as a robust control design tool

    Science.gov (United States)

    Gregory, Irene M.

    1994-01-01

    This presentation introduces Matlab as a tool used in flight control research. The example used to illustrate some of the capabilities of this software is a robust controller designed for a single stage to orbit air breathing vehicles's ascent to orbit. The global requirements of the controller are to stabilize the vehicle and follow a trajectory in the presence of atmospheric disturbances and strong dynamic coupling between airframe and propulsion.

  15. Generation of synthetic gamma spectra with MATLAB

    International Nuclear Information System (INIS)

    Palmerio, Julian J.; Coppo, Anibal D.

    2009-01-01

    Objectives: The aim of this work is the simulation of gamma spectra using the MATLAB program to generate the calibration curves in efficiency, which will be used to measure radioactive waste in drums. They are necessary for the proper characterization of these drums. A Monte Carlo simulation was basically developed with the random number generator Mersenne Twister and nuclear data obtained from NIST. This paper shows the results obtained and difficulties encountered until today. The physical correction of the simulated spectra has been the only aspect we have been working, up to this moment. Procedures: A simplified representation of the 'Laboratorio de Verificacion y Control de la Calidad' was chosen. Drums with cemented liquid waste are routinely measured in this laboratory. The commercial program MCNP was also used to get a valid reference in the field of simulation of spectra. We analyzed the spectra obtained by MATLAB in the light of classical literature photon detection and the spectrum obtained by MCNP. Conclusions: Currently the program developed seems adequate to simulate a measurement in the 'Laboratorio de Verificacion y Control de la Calidad'. The spectra obtained by MATLAB seem to physically represent what is observed in real spectra. However, it is a slow program. The current development efforts are directed to improve the speed of simulation. An alternative is to use the CUDA language for NVIDIA video cards to parallelized the simulation. An adequate simulation of the electronic measuring chain is also needed to obtain better representations of the shapes of the peaks. (author)

  16. Transportation channels calculation method in MATLAB

    International Nuclear Information System (INIS)

    Averyanov, G.P.; Budkin, V.A.; Dmitrieva, V.V.; Osadchuk, I.O.; Bashmakov, Yu.A.

    2014-01-01

    Output devices and charged particles transport channels are necessary components of any modern particle accelerator. They differ both in sizes and in terms of focusing elements depending on particle accelerator type and its destination. A package of transport line designing codes for magnet optical channels in MATLAB environment is presented in this report. Charged particles dynamics in a focusing channel can be studied easily by means of the matrix technique. MATLAB usage is convenient because its information objects are matrixes. MATLAB allows the use the modular principle to build the software package. Program blocks are small in size and easy to use. They can be executed separately or commonly. A set of codes has a user-friendly interface. Transport channel construction consists of focusing lenses (doublets and triplets). The main of the magneto-optical channel parameters are total length and lens position and parameters of the output beam in the phase space (channel acceptance, beam emittance - beam transverse dimensions, particles divergence and image stigmaticity). Choice of the channel operation parameters is based on the conditions for satisfying mutually competing demands. And therefore the channel parameters calculation is carried out by using the search engine optimization techniques.

  17. A community-based participatory research partnership to reduce vehicle idling near public schools.

    Science.gov (United States)

    Eghbalnia, Cynthia; Sharkey, Ken; Garland-Porter, Denisha; Alam, Mohammad; Crumpton, Marilyn; Jones, Camille; Ryan, Patrick H

    2013-05-01

    The authors implemented and assessed the effectiveness of a public health initiative aimed at reducing traffic-related air pollution exposure of the school community at four Cincinnati public schools. A partnership was fostered with academic environmental health researchers and community members. Anti-idling campaign materials were developed and education and training were provided to school bus drivers, students, parents, and school staff. Pledge drives and pre- and posteducation assessments were documented to measure the effectiveness of the program. After completing the educational component of the public health initiative, bus drivers (n = 397), community members (n = 53), and staff (n = 214) demonstrated significantly increased knowledge about the health effects of idling (p public health intervention. A community-driven public health initiative can be effective in both 1) enhancing community awareness about the benefits of reducing idling vehicles and 2) increasing active participation in idling reduction. The partnership initially developed has continued to develop toward a sustainable and growing process.

  18. Idle reduction assessment for the New York State Department of Transportation region 4 fleet.

    Science.gov (United States)

    2015-03-01

    Energetics Incorporated conducted a study to evaluate the operational, economic, and environmental impacts of advanced technologies to reduce idling in : the New York State Department of Transportation (NYSDOT) Region 4 fleet without compromising fun...

  19. Advanced Dynamics Analytical and Numerical Calculations with MATLAB

    CERN Document Server

    Marghitu, Dan B

    2012-01-01

    Advanced Dynamics: Analytical and Numerical Calculations with MATLAB provides a thorough, rigorous presentation of kinematics and dynamics while using MATLAB as an integrated tool to solve problems. Topics presented are explained thoroughly and directly, allowing fundamental principles to emerge through applications from areas such as multibody systems, robotics, spacecraft and design of complex mechanical devices. This book differs from others in that it uses symbolic MATLAB for both theory and applications. Special attention is given to solutions that are solved analytically and numerically using MATLAB. The illustrations and figures generated with MATLAB reinforce visual learning while an abundance of examples offer additional support. This book also: Provides solutions analytically and numerically using MATLAB Illustrations and graphs generated with MATLAB reinforce visual learning for students as they study Covers modern technical advancements in areas like multibody systems, robotics, spacecraft and des...

  20. Idle emissions from medium heavy-duty diesel and gasoline trucks.

    Science.gov (United States)

    Khan, A B M S; Clark, Nigel N; Gautam, Mridul; Wayne, W Scott; Thompson, Gregory J; Lyons, Donald W

    2009-03-01

    Idle emissions data from 19 medium heavy-duty diesel and gasoline trucks are presented in this paper. Emissions from these trucks were characterized using full-flow exhaust dilution as part of the Coordinating Research Council (CRC) Project E-55/59. Idle emissions data were not available from dedicated measurements, but were extracted from the continuous emissions data on the low-speed transient mode of the medium heavy-duty truck (MHDTLO) cycle. The four gasoline trucks produced very low oxides of nitrogen (NOx) and negligible particulate matter (PM) during idle. However, carbon monoxide (CO) and hydrocarbons (HCs) from these four trucks were approximately 285 and 153 g/hr on average, respectively. The gasoline trucks consumed substantially more fuel at an hourly rate (0.84 gal/hr) than their diesel counterparts (0.44 gal/hr) during idling. The diesel trucks, on the other hand, emitted higher NOx (79 g/hr) and comparatively higher PM (4.1 g/hr), on average, than the gasoline trucks (3.8 g/hr of NOx and 0.9 g/hr of PM, on average). Idle NOx emissions from diesel trucks were high for post-1992 model year engines, but no trends were observed for fuel consumption. Idle emissions and fuel consumption from the medium heavy-duty diesel trucks (MHDDTs) were marginally lower than those from the heavy heavy-duty diesel trucks (HHDDTs), previously reported in the literature.

  1. Analysis of Technology Options to Reduce the Fuel Consumption of Idling Trucks; FINAL

    International Nuclear Information System (INIS)

    Stodolsky, F.; Gaines, L.; Vyas, A.

    2000-01-01

    Long-haul trucks idling overnight consume more than 838 million gallons (20 million barrels) of fuel annually. Idling also emits pollutants. Truck drivers idle their engines primarily to (1) heat or cool the cab and/or sleeper, (2) keep the fuel warm in winter, and (3) keep the engine warm in the winter so that the engine is easier to start. Alternatives to overnight idling could save much of this fuel, reduce emissions, and cut operating costs. Several fuel-efficient alternatives to idling are available to provide heating and cooling: (1) direct-fired heater for cab/sleeper heating, with or without storage cooling; (2) auxiliary power units; and (3) truck stop electrification. Many of these technologies have drawbacks that limit market acceptance. Options that supply electricity are economically viable for trucks that are idled for 1,000-3,000 or more hours a year, while heater units could be used across the board. Payback times for fleets, which would receive quantity discounts on the prices, would be somewhat shorter

  2. Signals and systems primer with Matlab

    CERN Document Server

    Poularikas, Alexander D

    2006-01-01

    Signals and Systems Primer with MATLAB® equally emphasizes the fundamentals of both analog and digital signals and systems. To ensure insight into the basic concepts and methods, the text presents a variety of examples that illustrate a wide range of applications, from microelectromechanical to worldwide communication systems. It also provides MATLAB functions and procedures for practice and verification of these concepts.Taking a pedagogical approach, the author builds a solid foundation in signal processing as well as analog and digital systems. The book first introduces orthogonal signals,

  3. The Matlab Radial Basis Function Toolbox

    Directory of Open Access Journals (Sweden)

    Scott A. Sarra

    2017-03-01

    Full Text Available Radial Basis Function (RBF methods are important tools for scattered data interpolation and for the solution of Partial Differential Equations in complexly shaped domains. The most straight forward approach used to evaluate the methods involves solving a linear system which is typically poorly conditioned. The Matlab Radial Basis Function toolbox features a regularization method for the ill-conditioned system, extended precision floating point arithmetic, and symmetry exploitation for the purpose of reducing flop counts of the associated numerical linear algebra algorithms.

  4. Computational partial differential equations using Matlab

    CERN Document Server

    Li, Jichun

    2008-01-01

    Brief Overview of Partial Differential Equations The parabolic equations The wave equations The elliptic equations Differential equations in broader areasA quick review of numerical methods for PDEsFinite Difference Methods for Parabolic Equations Introduction Theoretical issues: stability, consistence, and convergence 1-D parabolic equations2-D and 3-D parabolic equationsNumerical examples with MATLAB codesFinite Difference Methods for Hyperbolic Equations IntroductionSome basic difference schemes Dissipation and dispersion errors Extensions to conservation lawsThe second-order hyperbolic PDE

  5. Digital signal processing with Matlab examples

    CERN Document Server

    Giron-Sierra, Jose Maria

    2017-01-01

    This is the first volume in a trilogy on modern Signal Processing. The three books provide a concise exposition of signal processing topics, and a guide to support individual practical exploration based on MATLAB programs. This book includes MATLAB codes to illustrate each of the main steps of the theory, offering a self-contained guide suitable for independent study. The code is embedded in the text, helping readers to put into practice the ideas and methods discussed. The book is divided into three parts, the first of which introduces readers to periodic and non-periodic signals. The second part is devoted to filtering, which is an important and commonly used application. The third part addresses more advanced topics, including the analysis of real-world non-stationary signals and data, e.g. structural fatigue, earthquakes, electro-encephalograms, birdsong, etc. The book’s last chapter focuses on modulation, an example of the intentional use of non-stationary signals.

  6. The Grad-Shafranov Reconstruction of Toroidal Magnetic Flux Ropes: Method Development and Benchmark Studies

    Science.gov (United States)

    Hu, Qiang

    2017-09-01

    We develop an approach of the Grad-Shafranov (GS) reconstruction for toroidal structures in space plasmas, based on in situ spacecraft measurements. The underlying theory is the GS equation that describes two-dimensional magnetohydrostatic equilibrium, as widely applied in fusion plasmas. The geometry is such that the arbitrary cross-section of the torus has rotational symmetry about the rotation axis, Z, with a major radius, r0. The magnetic field configuration is thus determined by a scalar flux function, Ψ, and a functional F that is a single-variable function of Ψ. The algorithm is implemented through a two-step approach: i) a trial-and-error process by minimizing the residue of the functional F(Ψ) to determine an optimal Z-axis orientation, and ii) for the chosen Z, a χ2 minimization process resulting in a range of r0. Benchmark studies of known analytic solutions to the toroidal GS equation with noise additions are presented to illustrate the two-step procedure and to demonstrate the performance of the numerical GS solver, separately. For the cases presented, the errors in Z and r0 are 9° and 22%, respectively, and the relative percent error in the numerical GS solutions is smaller than 10%. We also make public the computer codes for these implementations and benchmark studies.

  7. Paleopathological analysis of changes on animal bones originating from archaeological sites Caricin Grad and Studenica Monastery

    Directory of Open Access Journals (Sweden)

    Marković Nemanja

    2014-01-01

    Full Text Available This work presents the estimation of incidence and analysis of paleopathological changes on skeletal remains of the animals from archaeological sites Caricin Grad and Studenica Monastery. Moreover, there has been carried out the assessment of the skeletal elements, as well as taxonomic and age determination. The total of 2595 bones or bone fragments were examined. In 22 specimens there were noticed various abnormal skeletal changes in following animal species: cattle, sheep, goats, pigs, horses, donkeys and camels. Pathological changes were noticed on the teeth, mandibles, joints of long bones and phalanxes. By macroscopic analysis of these acquired pathological changes on bones of the animals, there was determined that the observed lesions had had proliferative, hypertrophic and chronic character. Proliferative changes on the bones of the cattle, horses, donkeys and camels point out to the fact that these animals were used for towing and/or load carrying. Identified diseases of oral cavity in small ruminants point out to improper and inadequate nutrition of these animals in the past.

  8. Revisit to Grad's Closure and Development of Physically Motivated Closure for Phenomenological High-Order Moment Model

    International Nuclear Information System (INIS)

    Myong, R. S.; Nagdewe, S. P.

    2011-01-01

    The Grad's closure for the high-order moment equation is revisited and, by extending his theory, a physically motivated closure is developed for the one-dimensional velocity shear gas flow. The closure is based on the physical argument of the relative importance of various terms appearing in the moment equation. Also, the closure is derived such that the resulting theory may be inclusive of the well established linear theory (Navier-Stokes-Fourier) as limiting case near local thermal equilibrium.

  9. A guide to MATLAB for beginners and experienced users

    CERN Document Server

    Hunt, Brian R; Rosenberg, Jonathan M

    2014-01-01

    Now in its third edition, this outstanding textbook explains everything you need to get started using MATLAB®. It contains concise explanations of essential MATLAB commands, as well as easily understood instructions for using MATLAB's programming features, graphical capabilities, simulation models, and rich desktop interface. MATLAB 8 and its new user interface is treated extensively in the book. New features in this edition include: a complete treatment of MATLAB's publish feature; new material on MATLAB graphics, enabling the user to master quickly the various symbolic and numerical plotting routines; and a robust presentation of MuPAD® and how to use it as a stand-alone platform. The authors have also updated the text throughout, reworking examples and exploring new applications. The book is essential reading for beginners, occasional users and experienced users wishing to brush up their skills. Further resources are available from the authors' website at www-math.umd.edu/schol/a-guide-to-matlab.html.

  10. Digital image processing an algorithmic approach with Matlab

    CERN Document Server

    Qidwai, Uvais

    2009-01-01

    Introduction to Image Processing and the MATLAB EnvironmentIntroduction Digital Image Definitions: Theoretical Account Image Properties MATLAB Algorithmic Account MATLAB CodeImage Acquisition, Types, and File I/OImage Acquisition Image Types and File I/O Basics of Color Images Other Color Spaces Algorithmic Account MATLAB CodeImage ArithmeticIntroduction Operator Basics Theoretical TreatmentAlgorithmic Treatment Coding ExamplesAffine and Logical Operations, Distortions, and Noise in ImagesIntroduction Affine Operations Logical Operators Noise in Images Distortions in ImagesAlgorithmic Account

  11. Estimation of fuel loss due to idling of vehicles at a signalized intersection in Chennai, India

    Science.gov (United States)

    Vasantha Kumar, S.; Gulati, Himanshu; Arora, Shivam

    2017-11-01

    The vehicles while waiting at signalized intersections are generally found to be in idling condition, i.e., not switching off their vehicles during red times. This phenomenon of idling of vehicles during red times at signalized intersections may lead to huge economic loss as lot of fuel is consumed by vehicles when they are in idling condition. The situation may even be worse in countries like India as different vehicle types consume varying amount of fuel. Only limited studies have been reported on estimation of fuel loss due to idling of vehicles in India. In the present study, one of the busy intersections in Chennai, namely, Tidel Park Junction in Rajiv Gandhi salai was considered. Data collection was carried out in one approach road of the intersection during morning and evening peak hours on a typical working day by manually noting down the red timings of each cycle and the corresponding number of two-wheelers, three-wheelers, passenger cars, light commercial vehicles (LCV) and heavy motorized vehicles (HMV) that were in idling mode. Using the fuel consumption values of various vehicles types suggested by Central Road Research Institute (CRRI), the total fuel loss during the study period was found to be Rs. 4,93,849/-. The installation of red timers, synchronization of signals, use of non-motorized transport for short trips and public awareness are some of the measures which government need to focus to save the fuel wasted at signalized intersections in major cities of India.

  12. xdamp Version 6 : an IDL-based data and image manipulation program.

    Energy Technology Data Exchange (ETDEWEB)

    Ballard, William Parker

    2012-04-01

    The original DAMP (DAta Manipulation Program) was written by Mark Hedemann of Sandia National Laboratories and used the CA-DISSPLA{trademark} (available from Computer Associates International, Inc., Garden City, NY) graphics package as its engine. It was used to plot, modify, and otherwise manipulate the one-dimensional data waveforms (data vs. time) from a wide variety of accelerators. With the waning of CA-DISSPLA and the increasing popularity of Unix(reg sign)-based workstations, a replacement was needed. This package uses the IDL(reg sign) software, available from Research Systems Incorporated, a Xerox company, in Boulder, Colorado, as the engine, and creates a set of widgets to manipulate the data in a manner similar to the original DAMP and earlier versions of xdamp. IDL is currently supported on a wide variety of Unix platforms such as IBM(reg sign) workstations, Hewlett Packard workstations, SUN(reg sign) workstations, Microsoft(reg sign) Windows{trademark} computers, Macintosh(reg sign) computers and Digital Equipment Corporation VMS(reg sign) and Alpha(reg sign) systems. Thus, xdamp is portable across many platforms. We have verified operation, albeit with some minor IDL bugs, on personal computers using Windows 7 and Windows Vista; Unix platforms; and Macintosh computers. Version 6 is an update that uses the IDL Virtual Machine to resolve the need for licensing IDL.

  13. Colour based sorting station with Matlab simulation

    Directory of Open Access Journals (Sweden)

    Constantin Victor

    2017-01-01

    Full Text Available The paper presents the design process and manufacturing elements of a colour-based sorting station. The system is comprised of a gravitational storage, which also contains the colour sensor. Parts are extracted using a linear pneumatic motor and are fed onto an electrically driven conveyor belt. Extraction of the parts is done at 4 points, using two pneumatic motors and a geared DC motor, while the 4th position is at the end of the belt. The mechanical parts of the system are manufactured using 3D printer technology, allowing for easy modification and adaption to the geometry of different parts. The paper shows all of the stages needed to design, optimize, test and implement the proposed solution. System optimization was performed using a graphical Matlab interface which also allows for sorting algorithm optimization.

  14. Scientific computing with MATLAB and Octave

    CERN Document Server

    Quarteroni, Alfio; Gervasio, Paola

    2014-01-01

    This textbook is an introduction to Scientific Computing, in which several numerical methods for the computer-based solution of certain classes of mathematical problems are illustrated. The authors show how to compute the zeros, the extrema, and the integrals of continuous functions, solve linear systems, approximate functions using polynomials and construct accurate approximations for the solution of ordinary and partial differential equations. To make the format concrete and appealing, the programming environments Matlab and Octave are adopted as faithful companions. The book contains the solutions to several problems posed in exercises and examples, often originating from important applications. At the end of each chapter, a specific section is devoted to subjects which were not addressed in the book and contains bibliographical references for a more comprehensive treatment of the material. From the review: ".... This carefully written textbook, the third English edition, contains substantial new developme...

  15. Coded Modulation in C and MATLAB

    Science.gov (United States)

    Hamkins, Jon; Andrews, Kenneth S.

    2011-01-01

    This software, written separately in C and MATLAB as stand-alone packages with equivalent functionality, implements encoders and decoders for a set of nine error-correcting codes and modulators and demodulators for five modulation types. The software can be used as a single program to simulate the performance of such coded modulation. The error-correcting codes implemented are the nine accumulate repeat-4 jagged accumulate (AR4JA) low-density parity-check (LDPC) codes, which have been approved for international standardization by the Consultative Committee for Space Data Systems, and which are scheduled to fly on a series of NASA missions in the Constellation Program. The software implements the encoder and decoder functions, and contains compressed versions of generator and parity-check matrices used in these operations.

  16. Object-oriented Matlab adaptive optics toolbox

    Science.gov (United States)

    Conan, R.; Correia, C.

    2014-08-01

    Object-Oriented Matlab Adaptive Optics (OOMAO) is a Matlab toolbox dedicated to Adaptive Optics (AO) systems. OOMAO is based on a small set of classes representing the source, atmosphere, telescope, wavefront sensor, Deformable Mirror (DM) and an imager of an AO system. This simple set of classes allows simulating Natural Guide Star (NGS) and Laser Guide Star (LGS) Single Conjugate AO (SCAO) and tomography AO systems on telescopes up to the size of the Extremely Large Telescopes (ELT). The discrete phase screens that make the atmosphere model can be of infinite size, useful for modeling system performance on large time scales. OOMAO comes with its own parametric influence function model to emulate different types of DMs. The cone effect, altitude thickness and intensity profile of LGSs are also reproduced. Both modal and zonal modeling approach are implemented. OOMAO has also an extensive library of theoretical expressions to evaluate the statistical properties of turbulence wavefronts. The main design characteristics of the OOMAO toolbox are object-oriented modularity, vectorized code and transparent parallel computing. OOMAO has been used to simulate and to design the Multi-Object AO prototype Raven at the Subaru telescope and the Laser Tomography AO system of the Giant Magellan Telescope. In this paper, a Laser Tomography AO system on an ELT is simulated with OOMAO. In the first part, we set-up the class parameters and we link the instantiated objects to create the source optical path. Then we build the tomographic reconstructor and write the script for the pseudo-open-loop controller.

  17. Introduction to Numerical Computation - analysis and Matlab illustrations

    DEFF Research Database (Denmark)

    Elden, Lars; Wittmeyer-Koch, Linde; Nielsen, Hans Bruun

    In a modern programming environment like eg MATLAB it is possible by simple commands to perform advanced calculations on a personal computer. In order to use such a powerful tool efiiciently it is necessary to have an overview of available numerical methods and algorithms and to know about...... are illustrated by examples in MATLAB....

  18. Flexible missile autopilot design studies with PC-MATLAB/386

    Science.gov (United States)

    Ruth, Michael J.

    1989-01-01

    Development of a responsive, high-bandwidth missile autopilot for airframes which have structural modes of unusually low frequency presents a challenging design task. Such systems are viable candidates for modern, state-space control design methods. The PC-MATLAB interactive software package provides an environment well-suited to the development of candidate linear control laws for flexible missile autopilots. The strengths of MATLAB include: (1) exceptionally high speed (MATLAB's version for 80386-based PC's offers benchmarks approaching minicomputer and mainframe performance); (2) ability to handle large design models of several hundred degrees of freedom, if necessary; and (3) broad extensibility through user-defined functions. To characterize MATLAB capabilities, a simplified design example is presented. This involves interactive definition of an observer-based state-space compensator for a flexible missile autopilot design task. MATLAB capabilities and limitations, in the context of this design task, are then summarized.

  19. EFFECTS OF ENGINE SPEED AND ACCESSORY LOAD ON IDLING EMISSIONS FROM HEAVY-DUTY DIESEL TRUCK ENGINES

    Science.gov (United States)

    A nontrivial portion of heavy-duty vehicle emissions of nitrogen oxides (NOx) and particulate matter (PM) occurs during idling. Regulators and the environmental community are interested in curtailing truck idling emissions, but current emissions models do not characterize them ac...

  20. 75 FR 63110 - Small Business Investment Companies-Conflicts of Interest and Investment of Idle Funds

    Science.gov (United States)

    2010-10-14

    ... conflict of interest exemption for a particular type of transaction. This change is expected to reduce the...--Conflicts of Interest and Investment of Idle Funds AGENCY: U.S. Small Business Administration. ACTION... rules, unless it first obtains a conflict of interest exemption from SBA. The revision would eliminate...

  1. 77 FR 20292 - Small Business Investment Companies-Conflicts of Interest and Investment of Idle Funds

    Science.gov (United States)

    2012-04-04

    ... conflict of interest, unless the SBIC obtains a prior written exemption from SBA. The most common type of...--Conflicts of Interest and Investment of Idle Funds AGENCY: U.S. Small Business Administration. ACTION: Final..., unless it first obtains a conflict of interest exemption from SBA. The revision eliminates the...

  2. Social Media and the Idle No More Movement: Citizenship, Activism and Dissent in Canada

    Science.gov (United States)

    Tupper, Jennifer

    2014-01-01

    This paper, informed by a critique of traditional understandings of citizenship and civic education, explores the use of social media as a means of fostering activism and dissent. Specifically, the paper explores the ways in which the Idle No More Movement, which began in Canada in 2012 marshalled social media to educate about and protest Bill…

  3. 41 CFR 101-25.109-1 - Identification of idle equipment.

    Science.gov (United States)

    2010-07-01

    ... comprised of senior program management, property management, and scientific personnel who are familiar with... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Identification of idle equipment. 101-25.109-1 Section 101-25.109-1 Public Contracts and Property Management Federal Property...

  4. 40 CFR 85.2218 - Preconditioned idle test-EPA 91.

    Science.gov (United States)

    2010-07-01

    .... (2) Idle mode—(i) Ford Motor Company and Honda vehicles. The engines of 1981-1987 model year Ford Motor Company vehicles and 1984-1985 model year Honda Preludes must be shut off for not more than ten...-1989 model year Ford Motor Company vehicles but may not be used for other vehicles. (ii) The mode timer...

  5. A review on idling reduction strategies to improve fuel economy and reduce exhaust emissions of transport vehicles

    International Nuclear Information System (INIS)

    Shancita, I.; Masjuki, H.H.; Kalam, M.A.; Rizwanul Fattah, I.M.; Rashed, M.M.; Rashedul, H.K.

    2014-01-01

    Highlights: • Introduce various idling reduction technologies for transport vehicles. • Exhibit their energy use, advantages, disadvantages to understand their capability. • Conduct critical review to improve fuel economy and exhaust emissions. • Suggest better technology according to their performance ability. - Abstract: To achieve reductions in vehicle idling, strategies and actions must be taken to minimize the time spent by drivers idling their engines. A number of benefits can be obtained in limiting the idling time. These benefits include savings in fuel use and maintenance costs, vehicle life extension, and reduction in exhaust emissions. The main objective of idling reduction (IR) devices is to reduce the amount of energy wasted by idling trucks, rail locomotives, and automobiles. During idling, gasoline vehicles emit a minimum amount of nitrogen oxides (NO x ) and negligible particulate matter (PM). However, generally a large amount of carbon monoxide (CO) and hydrocarbons (HC) are produced from these vehicles. Gasoline vehicles consume far more fuel at an hourly rate than their diesel counterparts during idling. Higher NOx and comparatively larger PM are produced by diesel vehicles than gasoline vehicles on the average during idling. Auxiliary power unit (APU), direct-fired heaters, fuel cells, thermal storage system, truck stop electrification, battery-based systems, engine idle management (shutdown) systems, electrical (shore power) solutions, cab comfort system, and hybridization are some of the available IR technologies whose performances for reducing fuel consumption and exhaust emissions have been compared. This paper analyzes the availability and capability of most efficient technologies to reduce fuel consumption and exhaust emissions from diesel and gasoline vehicles by comparing the findings of previous studies. The analysis reveals that among all the options direct fired heaters, APUs and electrified parking spaces exhibit better

  6. Long-Haul Truck Sleeper Heating Load Reduction Package for Rest Period Idling

    Energy Technology Data Exchange (ETDEWEB)

    Lustbader, Jason Aaron; Kekelia, Bidzina; Tomerlin, Jeff; Kreutzer, Cory J.; Yeakel, Skip; Adelman, Steven; Luo, Zhiming; Zehme, John

    2016-04-05

    Annual fuel use for sleeper cab truck rest period idling is estimated at 667 million gallons in the United States, or 6.8% of long-haul truck fuel use. Truck idling during a rest period represents zero freight efficiency and is largely done to supply accessory power for climate conditioning of the cab. The National Renewable Energy Laboratory's CoolCab project aims to reduce heating, ventilating, and air conditioning (HVAC) loads and resulting fuel use from rest period idling by working closely with industry to design efficient long-haul truck thermal management systems while maintaining occupant comfort. Enhancing the thermal performance of cab/sleepers will enable smaller, lighter, and more cost-effective idle reduction solutions. In addition, if the fuel savings provide a one- to three-year payback period, fleet owners will be economically motivated to incorporate them. For candidate idle reduction technologies to be implemented by original equipment manufacturers and fleets, their effectiveness must be quantified. To address this need, several promising candidate technologies were evaluated through experimentation and modeling to determine their effectiveness in reducing rest period HVAC loads. Load reduction strategies were grouped into the focus areas of solar envelope, occupant environment, conductive pathways, and efficient equipment. Technologies in each of these focus areas were investigated in collaboration with industry partners. The most promising of these technologies were then combined with the goal of exceeding a 30% reduction in HVAC loads. These technologies included 'ultra-white' paint, advanced insulation, and advanced curtain design. Previous testing showed more than a 35.7% reduction in air conditioning loads. This paper describes the overall heat transfer coefficient testing of this advanced load reduction technology package that showed more than a 43% reduction in heating load. Adding an additional layer of advanced insulation

  7. Long-Haul Truck Sleeper Heating Load Reduction Package for Rest Period Idling: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Lustbader, Jason; Kekelia, Bidzina; Tomerlin, Jeff; Kreutzer, Cory; Adelman, Steve; Yeakel, Skip; Luo, Zhiming; Zehme, John

    2016-03-24

    Annual fuel use for sleeper cab truck rest period idling is estimated at 667 million gallons in the United States, or 6.8% of long-haul truck fuel use. Truck idling during a rest period represents zero freight efficiency and is largely done to supply accessory power for climate conditioning of the cab. The National Renewable Energy Laboratory's CoolCab project aims to reduce heating, ventilating, and air conditioning (HVAC) loads and resulting fuel use from rest period idling by working closely with industry to design efficient long-haul truck thermal management systems while maintaining occupant comfort. Enhancing the thermal performance of cab/sleepers will enable smaller, lighter, and more cost-effective idle reduction solutions. In addition, if the fuel savings provide a one- to three-year payback period, fleet owners will be economically motivated to incorporate them. For candidate idle reduction technologies to be implemented by original equipment manufacturers and fleets, their effectiveness must be quantified. To address this need, several promising candidate technologies were evaluated through experimentation and modeling to determine their effectiveness in reducing rest period HVAC loads. Load reduction strategies were grouped into the focus areas of solar envelope, occupant environment, conductive pathways, and efficient equipment. Technologies in each of these focus areas were investigated in collaboration with industry partners. The most promising of these technologies were then combined with the goal of exceeding a 30% reduction in HVAC loads. These technologies included 'ultra-white' paint, advanced insulation, and advanced curtain design. Previous testing showed more than a 35.7% reduction in air conditioning loads. This paper describes the overall heat transfer coefficient testing of this advanced load reduction technology package that showed more than a 43% reduction in heating load. Adding an additional layer of advanced insulation

  8. Introduction to finite element analysis using MATLAB and Abaqus

    CERN Document Server

    Khennane, Amar

    2013-01-01

    There are some books that target the theory of the finite element, while others focus on the programming side of things. Introduction to Finite Element Analysis Using MATLAB(R) and Abaqus accomplishes both. This book teaches the first principles of the finite element method. It presents the theory of the finite element method while maintaining a balance between its mathematical formulation, programming implementation, and application using commercial software. The computer implementation is carried out using MATLAB, while the practical applications are carried out in both MATLAB and Abaqus. MA

  9. Kinematic analysis of the finger exoskeleton using MATLAB/Simulink.

    Science.gov (United States)

    Nasiłowski, Krzysztof; Awrejcewicz, Jan; Lewandowski, Donat

    2014-01-01

    A paralyzed and not fully functional part of human body can be supported by the properly designed exoskeleton system with motoric abilities. It can help in rehabilitation, or movement of a disabled/paralyzed limb. Both suitably selected geometry and specialized software are studied applying the MATLAB environment. A finger exoskeleton was the base for MATLAB/Simulink model. Specialized software, such as MATLAB/Simulink give us an opportunity to optimize calculation reaching precise results, which help in next steps of design process. The calculations carried out yield information regarding movement relation between three functionally connected actuators and showed distance and velocity changes during the whole simulation time.

  10. Matlab Tools: An Alternative to Planning Systems in Brachytherapy Treatments

    International Nuclear Information System (INIS)

    Herrera, Higmar; Rodriguez, Mercedes; Rodriguez, Miguel

    2006-01-01

    This work proposes the use of the Matlab environment to obtain the treatment dose based on the reported data by Krishnaswamy and Liu et al. The comparison with reported measurements is showed for the Amersham source model. For the 3M source model, measurements with TLDs and a Monte Carlo simulation are compared to the data obtained by Matlab. The difference for the Amersham model is well under the 15% recommended by the IAEA and for the 3M model, although the difference is greater, the results are consistent. The good agreement to the reported data allows the Matlab calculations to be used in daily brachytherapy treatments

  11. A Graphical User Interface to Generalized Linear Models in MATLAB

    Directory of Open Access Journals (Sweden)

    Peter Dunn

    1999-07-01

    Full Text Available Generalized linear models unite a wide variety of statistical models in a common theoretical framework. This paper discusses GLMLAB-software that enables such models to be fitted in the popular mathematical package MATLAB. It provides a graphical user interface to the powerful MATLAB computational engine to produce a program that is easy to use but with many features, including offsets, prior weights and user-defined distributions and link functions. MATLAB's graphical capacities are also utilized in providing a number of simple residual diagnostic plots.

  12. Paleomagnetic dating: Methods, MATLAB software, example

    Science.gov (United States)

    Hnatyshin, Danny; Kravchinsky, Vadim A.

    2014-09-01

    A MATLAB software tool has been developed to provide an easy to use graphical interface for the plotting and interpretation of paleomagnetic data. The tool takes either paleomagnetic directions or paleopoles and compares them to a user defined apparent polar wander path or secular variation curve to determine the age of a paleomagnetic sample. Ages can be determined in two ways, either by translating the data onto the reference curve, or by rotating it about a set location (e.g. sampling location). The results are then compiled in data tables which can be exported as an excel file. This data can also be plotted using variety of built-in stereographic projections, which can then be exported as an image file. This software was used to date the giant Sukhoi Log gold deposit in Russia. Sukhoi Log has undergone a complicated history of faulting, folding, metamorphism, and is the vicinity of many granitic bodies. Paleomagnetic analysis of Sukhoi Log allowed for the timing of large scale thermal or chemical events to be determined. Paleomagnetic analysis from gold mineralized black shales was used to define the natural remanent magnetization recorded at Sukhoi Log. The obtained paleomagnetic direction from thermal demagnetization produced a paleopole at 61.3°N, 155.9°E, with the semi-major axis and semi-minor axis of the 95% confidence ellipse being 16.6° and 15.9° respectively. This paleopole is compared to the Siberian apparent polar wander path (APWP) by translating the paleopole to the nearest location on the APWP. This produced an age of 255.2- 31.0+ 32.0Ma and is the youngest well defined age known for Sukhoi Log. We propose that this is the last major stage of activity at Sukhoi Log, and likely had a role in determining the present day state of mineralization seen at the deposit.

  13. Matlab GUI for a Fluid Mixer

    Science.gov (United States)

    Barbieri, Enrique

    2005-01-01

    The Test and Engineering Directorate at NASA John C. Stennis Space Center developed an interest to study the modeling, evaluation, and control of a liquid hydrogen (LH2) and gas hydrogen (GH2) mixer subsystem of a ground test facility. This facility carries out comprehensive ground-based testing and certification of liquid rocket engines including the Space Shuttle Main engine. A software simulation environment developed in MATLAB/SIMULINK (M/S) will allow NASA engineers to test rocket engine systems at relatively no cost. In the progress report submitted in February 2004, we described the development of two foundation programs, a reverse look-up application using various interpolation algorithms, a variety of search and return methods, and self-checking methods to reduce the error in returned search results to increase the functionality of the program. The results showed that these efforts were successful. To transfer this technology to engineers who are not familiar with the M/S environment, a four-module GUI was implemented allowing the user to evaluate the mixer model under open-loop and closed-loop conditions. The progress report was based on an udergraduate Honors Thesis by Ms. Jamie Granger Austin in the Department of Electrical Engineering and Computer Science at Tulane University, during January-May 2003, and her continued efforts during August-December 2003. In collaboration with Dr. Hanz Richter and Dr. Fernando Figueroa we published these results in a NASA Tech Brief due to appear this year. Although the original proposal in 2003 did not address other components of the test facility, we decided in the last few months to extend our research and consider a related pressurization tank component as well. This report summarizes the results obtained towards a Graphical User Interface (GUI) for the evaluation and control of the hydrogen mixer subsystem model and for the pressurization tank each taken individually. Further research would combine the two

  14. System design through Matlab, control toolbox and Simulink

    CERN Document Server

    Singh, Krishna K

    2001-01-01

    MATLAB , a software package developed by Math Works, Inc. is powerful, versatile and interactive software for scientific and technical computations including simulations. Specialised toolboxes provided with several built-in functions are a special feature of MATLAB . This book titled System Design through MATLAB , Control Toolbox and SIMULINK aims at getting the reader started with computations and simulations in system engineering quickly and easily and then proceeds to build concepts for advanced computations and simulations that includes the control and compensation of systems. Simulation through SIMULINK has also been described to allow the reader to get the feel of the real world situation. This book is appropriate for undergraduate students undergoing final semester of their project work, postgraduate students who have MATLAB integrated in their course or wish to take up simulation problem in the area of system engineering for their dissertation work and research scholars for whom MATLABÊ

  15. Speeding up the MATLAB complex networks package using graphic processors

    International Nuclear Information System (INIS)

    Zhang Bai-Da; Wu Jun-Jie; Li Xin; Tang Yu-Hua

    2011-01-01

    The availability of computers and communication networks allows us to gather and analyse data on a far larger scale than previously. At present, it is believed that statistics is a suitable method to analyse networks with millions, or more, of vertices. The MATLAB language, with its mass of statistical functions, is a good choice to rapidly realize an algorithm prototype of complex networks. The performance of the MATLAB codes can be further improved by using graphic processor units (GPU). This paper presents the strategies and performance of the GPU implementation of a complex networks package, and the Jacket toolbox of MATLAB is used. Compared with some commercially available CPU implementations, GPU can achieve a speedup of, on average, 11.3×. The experimental result proves that the GPU platform combined with the MATLAB language is a good combination for complex network research. (interdisciplinary physics and related areas of science and technology)

  16. Introducing Effects in an Image: A MATLAB Approach

    OpenAIRE

    Kumar , Vinay; Sood , Saurabh; Mishra , Shruti

    2008-01-01

    A detailed study of introducing morning, night, and some more effect in an image is discussed, the original image is clicked in the morning. Several examples have also been discussed. MATLAB is used for the processing.

  17. Development and Validation of Reentry Simulation Using MATLAB

    National Research Council Canada - National Science Library

    Jameson, Jr, Robert E

    2006-01-01

    This research effort develops a program using MATLAB to solve the equations of motion for atmospheric reentry and analyzes the validity of the program for use as a tool to expeditiously predict reentry profiles...

  18. Research based on matlab method of digital trapezoidal shaping filter

    International Nuclear Information System (INIS)

    Zhou Qinghua; Zhang Ruanyu; Li Taihua

    2008-01-01

    In order to develop digital shaping system fast and conveniently, the paper presents the method of optimizing the trapezoidal shaping filter's parameters by using MATLAB, and discusses the affections of the parameters to the shaping result by this method. (authors)

  19. Design and fabrication of diffractive optical elements with MATLAB

    National Research Council Canada - National Science Library

    Bhattacharya, Shanti (Professor in Optics); Vijayakumar, Anand

    2017-01-01

    ... their diffraction patterns using MATLAB. The fundamentals of fabrication techniques such as photolithography, electron beam lithography, and focused ion beam lithography with basic instructions for the beginner are presented...

  20. Study of a photovoltaic system with MPPT using Matlab

    Directory of Open Access Journals (Sweden)

    Dumitru Pop

    2012-12-01

    Full Text Available In this paper a photovoltaic (PV system is analyzed using Matlab. First, a Matlab code is written in order to obtain the I-V and P-V curves at different values of solar irradiation and cell temperature. The results were compared with the experimental data of a commercial PV module, USP 150. Then, the code was implemented in Simulink and, along with a MPPT algorithm and a DC-DC converter, the whole system was simulated.

  1. Training course "Porting code from Matlab to Python"

    OpenAIRE

    Diaz, Sandra; Klijn, Wouter; Deepu, Rajalekshmi; Peyser, Alexander; Oden, Lena

    2017-01-01

    Python is becoming a popular language for scientific applications and is increasingly used for high performance computing. In this course we want to introduce Matlab programmers to the usage of Python. Matlab and Python have a comparable language philosophy, but Python can offer better performance using its optimizations and parallelization interfaces. Python also increases the portability and flexibility (interaction with other open source and proprietary software packages) of solutions, and...

  2. Subband/Transform MATLAB Functions For Processing Images

    Science.gov (United States)

    Glover, D.

    1995-01-01

    SUBTRANS software is package of routines implementing image-data-processing functions for use with MATLAB*(TM) software. Provides capability to transform image data with block transforms and to produce spatial-frequency subbands of transformed data. Functions cascaded to provide further decomposition into more subbands. Also used in image-data-compression systems. For example, transforms used to prepare data for lossy compression. Written for use in MATLAB mathematical-analysis environment.

  3. Application of Sleeper Cab Thermal Management Technologies to Reduce Idle Climate Control Loads in Long-Haul Trucks

    Energy Technology Data Exchange (ETDEWEB)

    Lustbader, J. A.; Venson, T.; Adelman, S.; Dehart, C.; Yeakel, S.; Castillo, M. S.

    2012-10-01

    Each intercity long-haul truck in the U.S. idles approximately 1,800 hrs per year, primarily for sleeper cab hotel loads. Including workday idling, over 2 billion gallons of fuel are used annually for truck idling. NREL's CoolCab project works closely with industry to design efficient thermal management systems for long-haul trucks that keep the cab comfortable with minimized engine idling and fuel use. The impact of thermal load reduction technologies on idle reduction systems were characterized by conducting thermal soak tests, overall heat transfer tests, and 10-hour rest period A/C tests. Technologies evaluated include advanced insulation packages, a solar reflective film applied to the vehicle's opaque exterior surfaces, a truck featuring both film and insulation, and a battery-powered A/C system. Opportunities were identified to reduce heating and cooling loads for long-haul truck idling by 36% and 34%, respectively, which yielded a 23% reduction in battery pack capacity of the idle-reduction system. Data were also collected for development and validation of a CoolCalc HVAC truck cab model. CoolCalc is an easy-to-use, simplified, physics-based HVAC load estimation tool that requires no meshing, has flexible geometry, excludes unnecessary detail, and is less time-intensive than more detailed computer-aided engineering modeling approaches.

  4. OMPC: an Open-Source MATLAB-to-Python Compiler.

    Science.gov (United States)

    Jurica, Peter; van Leeuwen, Cees

    2009-01-01

    Free access to scientific information facilitates scientific progress. Open-access scientific journals are a first step in this direction; a further step is to make auxiliary and supplementary materials that accompany scientific publications, such as methodological procedures and data-analysis tools, open and accessible to the scientific community. To this purpose it is instrumental to establish a software base, which will grow toward a comprehensive free and open-source language of technical and scientific computing. Endeavors in this direction are met with an important obstacle. MATLAB((R)), the predominant computation tool in many fields of research, is a closed-source commercial product. To facilitate the transition to an open computation platform, we propose Open-source MATLAB((R))-to-Python Compiler (OMPC), a platform that uses syntax adaptation and emulation to allow transparent import of existing MATLAB((R)) functions into Python programs. The imported MATLAB((R)) modules will run independently of MATLAB((R)), relying on Python's numerical and scientific libraries. Python offers a stable and mature open source platform that, in many respects, surpasses commonly used, expensive commercial closed source packages. The proposed software will therefore facilitate the transparent transition towards a free and general open-source lingua franca for scientific computation, while enabling access to the existing methods and algorithms of technical computing already available in MATLAB((R)). OMPC is available at http://ompc.juricap.com.

  5. Idle emissions from heavy-duty diesel and natural gas vehicles at high altitude.

    Science.gov (United States)

    McCormick, R L; Graboski, M S; Alleman, T L; Yanowitz, J

    2000-11-01

    Idle emissions of total hydrocarbon (THC), CO, NOx, and particulate matter (PM) were measured from 24 heavy-duty diesel-fueled (12 trucks and 12 buses) and 4 heavy-duty compressed natural gas (CNG)-fueled vehicles. The volatile organic fraction (VOF) of PM and aldehyde emissions were also measured for many of the diesel vehicles. Experiments were conducted at 1609 m above sea level using a full exhaust flow dilution tunnel method identical to that used for heavy-duty engine Federal Test Procedure (FTP) testing. Diesel trucks averaged 0.170 g/min THC, 1.183 g/min CO, 1.416 g/min NOx, and 0.030 g/min PM. Diesel buses averaged 0.137 g/min THC, 1.326 g/min CO, 2.015 g/min NOx, and 0.048 g/min PM. Results are compared to idle emission factors from the MOBILE5 and PART5 inventory models. The models significantly (45-75%) overestimate emissions of THC and CO in comparison with results measured from the fleet of vehicles examined in this study. Measured NOx emissions were significantly higher (30-100%) than model predictions. For the pre-1999 (pre-consent decree) truck engines examined in this study, idle NOx emissions increased with model year with a linear fit (r2 = 0.6). PART5 nationwide fleet average emissions are within 1 order of magnitude of emissions for the group of vehicles tested in this study. Aldehyde emissions for bus idling averaged 6 mg/min. The VOF averaged 19% of total PM for buses and 49% for trucks. CNG vehicle idle emissions averaged 1.435 g/min for THC, 1.119 g/min for CO, 0.267 g/min for NOx, and 0.003 g/min for PM. The g/min PM emissions are only a small fraction of g/min PM emissions during vehicle driving. However, idle emissions of NOx, CO, and THC are significant in comparison with driving emissions.

  6. MASCOT - MATLAB Stability and Control Toolbox

    Science.gov (United States)

    Kenny, Sean; Crespo, Luis

    2011-01-01

    MASCOT software was created to provide the conceptual aircraft designer accurate predictions of air vehicle stability and control characteristics. The code takes as input mass property data in the form of an inertia tensor, aerodynamic loading data, and propulsion (i.e. thrust) loading data. Using fundamental non-linear equations of motion, MASCOT then calculates vehicle trim and static stability data for any desired flight condition. Common predefined flight conditions are included. The predefined flight conditions include six horizontal and six landing rotation conditions with varying options for engine out, crosswind and sideslip, plus three takeoff rotation conditions. Results are displayed through a unique graphical interface developed to provide stability and control information to the conceptual design engineers using a qualitative scale indicating whether the vehicle has acceptable, marginal, or unacceptable static stability characteristics. This software allows the user to prescribe the vehicle s CG location, mass, and inertia tensor so that any loading configuration between empty weight and maximum take-off weight can be analyzed. The required geometric and aerodynamic data as well as mass and inertia properties may be entered directly, passed through data files, or come from external programs such as Vehicle Sketch Pad (VSP). The current version of MASCOT has been tested with VSP used to compute the required data, which is then passed directly into the program. In VSP, the vehicle geometry is created and manipulated. The aerodynamic coefficients, stability and control derivatives, are calculated using VorLax, which is now available directly within VSP. MASCOT has been written exclusively using the technical computing language MATLAB . This innovation is able to bridge the gap between low-fidelity conceptual design and higher-fidelity stability and control analysis. This new tool enables the conceptual design engineer to include detailed static stability

  7. Programming for computations MATLAB/Octave : a gentle introduction to numerical simulations with MATLAB/Octave

    CERN Document Server

    Linge, Svein

    2016-01-01

    This book presents computer programming as a key method for solving mathematical problems. There are two versions of the book, one for MATLAB and one for Python. The book was inspired by the Springer book TCSE 6: A Primer on Scientific Programming with Python (by Langtangen), but the style is more accessible and concise, in keeping with the needs of engineering students. The book outlines the shortest possible path from no previous experience with programming to a set of skills that allows the students to write simple programs for solving common mathematical problems with numerical methods in engineering and science courses. The emphasis is on generic algorithms, clean design of programs, use of functions, and automatic tests for verification.

  8. VQone MATLAB toolbox: A graphical experiment builder for image and video quality evaluations: VQone MATLAB toolbox.

    Science.gov (United States)

    Nuutinen, Mikko; Virtanen, Toni; Rummukainen, Olli; Häkkinen, Jukka

    2016-03-01

    This article presents VQone, a graphical experiment builder, written as a MATLAB toolbox, developed for image and video quality ratings. VQone contains the main elements needed for the subjective image and video quality rating process. This includes building and conducting experiments and data analysis. All functions can be controlled through graphical user interfaces. The experiment builder includes many standardized image and video quality rating methods. Moreover, it enables the creation of new methods or modified versions from standard methods. VQone is distributed free of charge under the terms of the GNU general public license and allows code modifications to be made so that the program's functions can be adjusted according to a user's requirements. VQone is available for download from the project page (http://www.helsinki.fi/psychology/groups/visualcognition/).

  9. Characterization of high level nuclear waste glass samples following extended melter idling

    Energy Technology Data Exchange (ETDEWEB)

    Fox, Kevin M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Peeler, David K. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Kruger, Albert A. [USDOE Office of River Protection, Richland, WA (United States)

    2015-06-16

    The Savannah River Site Defense Waste Processing Facility (DWPF) melter was recently idled with glass remaining in the melt pool and riser for approximately three months. This situation presented a unique opportunity to collect and analyze glass samples since outages of this duration are uncommon. The objective of this study was to obtain insight into the potential for crystal formation in the glass resulting from an extended idling period. The results will be used to support development of a crystal-tolerant approach for operation of the high-level waste melter at the Hanford Tank Waste Treatment and Immobilization Plant (WTP). Two glass pour stream samples were collected from DWPF when the melter was restarted after idling for three months. The samples did not contain crystallization that was detectible by X-ray diffraction. Electron microscopy identified occasional spinel and noble metal crystals of no practical significance. Occasional platinum particles were observed by microscopy as an artifact of the sample collection method. Reduction/oxidation measurements showed that the pour stream glasses were fully oxidized, which was expected after the extended idling period. Chemical analysis of the pour stream glasses revealed slight differences in the concentrations of some oxides relative to analyses of the melter feed composition prior to the idling period. While these differences may be within the analytical error of the laboratories, the trends indicate that there may have been some amount of volatility associated with some of the glass components, and that there may have been interaction of the glass with the refractory components of the melter. These changes in composition, although small, can be attributed to the idling of the melter for an extended period. The changes in glass composition resulted in a 70-100 °C increase in the predicted spinel liquidus temperature (TL) for the pour stream glass samples relative to the analysis of the melter feed prior to

  10. Lean hydrous and anhydrous bioethanol combustion in spark ignition engine at idle

    International Nuclear Information System (INIS)

    Chuepeng, Sathaporn; Srisuwan, Sudecha; Tongroon, Manida

    2016-01-01

    Highlights: • Anhydrous ethanol burns fastest in uncalibrated engine at equal equivalence ratio. • The leaner hydrous ethanol combustion tends to elevate the COV in imep. • Hydrous ethanol consumption was 10% greater than anhydrous ethanol at ϕ = 0.67 limit. • Optimizing alternative fuel engine at idle for stability and emission is suggested. - Abstract: The applications of anhydrous bioethanol to substitute or replace gasoline fuel have shown to attain benefits in terms of engine thermal efficiency, power output and exhaust emissions from spark ignition engines. A hydrous bioethanol has also been gained more attention due to its energy and cost effectiveness. The main aim of this work is to minimize fuel quantity injected to the intake ports of a four-cylinder engine under idle condition. The engine running with hydrous ethanol undergoes within lean-burn condition as its combustion stability is analyzed using an engine indicating system. Coefficient of variation in indicated mean effective pressure is an indicator for combustion stability with hydrocarbon and carbon monoxide emission monitoring as a supplement. Anhydrous ethanol burns faster than hydrous ethanol and gasoline in the uncalibrated engine at the same fuel-to-air equivalence ratio under idle condition. The leaner hydrous ethanol combustion tends to elevate the coefficient of variation in indicated mean effective pressure. The experimental results have found that the engine consumes greater hydrous ethanol by 10% on mass basis compared with those of anhydrous ethanol at the lean limit of fuel-to-air equivalence ratio of 0.67. The results of exhaust gas analysis were compared with those predicted by chemical equilibrium analysis of the fuel-air combustion; the resemble trends were found. Calibrating the alternative fueled engine for fuel injection quantity should be accomplished at idle with combustion stability and emissions optimization.

  11. Dimetrodon: Processor-level Preventive Thermal Management via Idle Cycle Injection

    OpenAIRE

    Reddi, Vijay Janapa; Gandhi, Sanjay; Brooks, David M.; Seltzer, Margo I.; Bailis, Peter

    2011-01-01

    Processor-level dynamic thermal management techniques have long targeted worst-case thermal margins. We examine the thermal-performance trade-offs in average-case, preventive thermal management by actively degrading application performance to achieve long-term thermal control. We propose Dimetrodon, the use of idle cycle injection, a flexible, per-thread technique, as a preventive thermal management mechanism and demonstrate its efficiency compared to hardware techniques in a commodity operatin...

  12. 40 CFR 85.2219 - Idle test with loaded preconditioning-EPA 91.

    Science.gov (United States)

    2010-07-01

    ... (5.1-6.3). 7 or more 32-35 (52-56) 8.4-10.8 (6.3-8.1). (2) Idle mode—(i) Ford Motor Company and Honda vehicles. (Optional.) The engines of 1981-1987 model year Ford Motor Company vehicles and 1984-1985 model... also be used for 1988-1989 model year Ford Motor Company vehicles but may not be used for other...

  13. Sleeper Cab Climate Control Load Reduction for Long-Haul Truck Rest Period Idling

    Energy Technology Data Exchange (ETDEWEB)

    Lustbader, J. A.; Kreutzer, C.; Adelman, S.; Yeakel, S.; Zehme, J.

    2015-04-29

    Annual fuel use for long-haul truck rest period idling is estimated at 667 million gallons in the United States. The U.S. Department of Energy’s National Renewable Energy Laboratory’s CoolCab project aims to reduce heating, ventilating, and air conditioning (HVAC) loads and resulting fuel use from rest period idling by working closely with industry to design efficient long-haul truck climate control systems while maintaining occupant comfort. Enhancing the thermal performance of cab/sleepers will enable smaller, lighter, and more cost-effective idle reduction solutions. In order for candidate idle reduction technologies to be implemented at the original equipment manufacturer and fleet level, their effectiveness must be quantified. To address this need, a number of promising candidate technologies were evaluated through experimentation and modeling to determine their effectiveness in reducing rest period HVAC loads. For this study, load reduction strategies were grouped into the focus areas of solar envelope, occupant environment, and conductive pathways. The technologies selected for a complete-cab package of technologies were “ultra-white” paint, advanced insulation, and advanced curtains. To measure the impact of these technologies, a nationally-averaged solar-weighted reflectivity long-haul truck paint color was determined and applied to the baseline test vehicle. Using the complete-cab package of technologies, electrical energy consumption for long-haul truck daytime rest period air conditioning was reduced by at least 35% for summer weather conditions in Colorado. The National Renewable Energy Laboratory's CoolCalc model was then used to extrapolate the performance of the thermal load reduction technologies nationally for 161 major U.S. cities using typical weather conditions for each location over an entire year.

  14. xdamp Version 3: An IDL reg-sign-based data and image manipulation program

    International Nuclear Information System (INIS)

    Ballard, W.P.

    1998-05-01

    The original DAMP (DAta Manipulation Program) was written by Mark Hedemann of Sandia National Laboratories and used the CA-DISSPLA trademark (available from Computer Associates International, Inc., Garden City, NY) graphics package as its engine. It was used to plot, modify, and otherwise manipulate the one-dimensional data waveforms (data vs. time) from a wide variety of accelerators. With the waning of CA-DISSPLA and the increasing popularity of Unix reg-sign-based workstations, a replacement was needed. This package uses the IDL reg-sign software, available from Research Systems Incorporated in Boulder, Colorado, as the engine, and creates a set of widgets to manipulate the data in a manner similar to the original DAMP and earlier versions of xdamp. IDL is currently supported on a wide variety of Unix platforms such as IBM reg-sign workstations, Hewlett Packard workstations, SUN reg-sign workstations, Microsoft reg-sign Windows trademark computers, Macintosh reg-sign computers and Digital Equipment Corporation VMS reg-sign and Alpha reg-sign systems. Thus, xdamp is portable across many platforms. The author has verified operation, albeit with some minor IDL bugs, on personal computers using Windows 95 and Windows NT; IBM Unix platforms; and DEC alpha and VMS systems; HP 9000/700 series workstations; and Macintosh computers, both regular and PowerPC trademark versions. Version 3 adds the capability to manipulate images to the original xdamp capabilities

  15. Application of Finite Element Based Simulation and Modal Testing Methods to Improve Vehicle Powertrain Idle Vibration

    Directory of Open Access Journals (Sweden)

    Polat Sendur

    2017-01-01

    Full Text Available Current practice of analytical and test methods related to the analysis, testing and improvement of vehicle vibrations is overviewed. The methods are illustrated on the determination and improvement of powertrain induced steering wheel vibration of a heavy commercial truck. More specifically, the transmissibility of powertrain idle vibration to cabin is investigated with respect to powertrain rigid body modes and modal alignment of the steering column/wheel system is considered. It is found out that roll mode of the powertrain is not separated from idle excitation for effective vibration isolation as well as steering wheel column mode is close to the 3rd engine excitation frequency order, which results in high vibration levels. Powertrain roll mode is optimized by tuning the powertrain mount stiffness to improve the performance. Steering column mode is also separated from the 3rd engine excitation frequency by the application of a mass absorber. It is concluded that the use of analytical and test methods to address the complex relation between design parameters and powertrain idle response is effective to optimize the system performance and evaluate the trade-offs in the vehicle design such as vibration performance and weight. Reference Number: www.asrongo.org/doi:4.2017.2.1.10

  16. A Heuristic Scheduling Algorithm for Minimizing Makespan and Idle Time in a Nagare Cell

    Directory of Open Access Journals (Sweden)

    M. Muthukumaran

    2012-01-01

    Full Text Available Adopting a focused factory is a powerful approach for today manufacturing enterprise. This paper introduces the basic manufacturing concept for a struggling manufacturer with limited conventional resources, providing an alternative solution to cell scheduling by implementing the technique of Nagare cell. Nagare cell is a Japanese concept with more objectives than cellular manufacturing system. It is a combination of manual and semiautomatic machine layout as cells, which gives maximum output flexibility for all kind of low-to-medium- and medium-to-high- volume productions. The solution adopted is to create a dedicated group of conventional machines, all but one of which are already available on the shop floor. This paper focuses on the development of heuristic scheduling algorithm in step-by-step method. The algorithm states that the summation of processing time of all products on each machine is calculated first and then the sum of processing time is sorted by the shortest processing time rule to get the assignment schedule. Based on the assignment schedule Nagare cell layout is arranged for processing the product. In addition, this algorithm provides steps to determine the product ready time, machine idle time, and product idle time. And also the Gantt chart, the experimental analysis, and the comparative results are illustrated with five (1×8 to 5×8 scheduling problems. Finally, the objective of minimizing makespan and idle time with greater customer satisfaction is studied through.

  17. Effect of Alcohol on Diesel Engine Combustion Operating with Biodiesel-Diesel Blend at Idling Conditions

    Science.gov (United States)

    Mahmudul, H. M.; Hagos, Ftwi. Y.; A, M. Mukhtar N.; Mamat, Rizalman; Abdullah, A. Adam

    2018-03-01

    Biodiesel is a promising alternative fuel to run the automotive engine. However, its blends have not been properly investigated during idling as it is the main problem to run the vehicles in a big city. The purpose of this study is to evaluate the impact of alcohol additives such as butanol and ethanol on combustion parameters under idling conditions when a single cylinder diesel engine operates with diesel, diesel-biodiesel blends, and diesel biodiesel-alcohol blends. The engine combustion parameters such as peak pressure, heat release rate and ignition delay were computed. This investigation has revealed that alcohol blends with diesel and biodiesel, BU20 blend yield higher maximum peak cylinder pressure than diesel. B5 blend was found with the lowest energy release among all. B20 was slightly lower than diesel. BU20 blend was seen with the highest peak energy release where E20 blend was found advance than diesel. Among all, the blends alcohol component revealed shorter ignition delay. B5 and B20 blends were influenced by biodiesel interference and the burning fraction were found slightly slower than conventional diesel where BU20 and E20 blends was found slightly faster than diesel So, based on the result, it can be said that among the alcohol blends butanol and ethanol can be promising alternative at idling conditions and can be used without any engine modifications.

  18. Exact Solutions to Several Nonlinear Cases of Generalized Grad-Shafranov Equation for Ideal Magnetohydrodynamic Flows in Axisymmetric Domain

    Science.gov (United States)

    Adem, Abdullahi Rashid; Moawad, Salah M.

    2018-05-01

    In this paper, the steady-state equations of ideal magnetohydrodynamic incompressible flows in axisymmetric domains are investigated. These flows are governed by a second-order elliptic partial differential equation as a type of generalized Grad-Shafranov equation. The problem of finding exact equilibria to the full governing equations in the presence of incompressible mass flows is considered. Two different types of constraints on position variables are presented to construct exact solution classes for several nonlinear cases of the governing equations. Some of the obtained results are checked for their applications to magnetic confinement plasma. Besides, they cover many previous configurations and include new considerations about the nonlinearity of magnetic flux stream variables.

  19. Effect of oxygenate additive on diesel engine fuel consumption and emissions operating with biodiesel-diesel blend at idling conditions

    Science.gov (United States)

    Mahmudul, H. M.; Hagos, F. Y.; Mamat, R.; Noor, M. M.; Yusri, I. M.

    2017-10-01

    Biodiesel is promising alternative fuel to run the automotive engine but idling is the main problem to run the vehicles in a big city. Vehicles running with idling condition cause higher fuel supply and higher emission level due to being having fuel residues in the exhaust. The purpose of this study is to evaluate the impact of alcohol additive on fuel consumption and emissions parameters under idling conditions when a multicylinder diesel engine operates with the diesel-biodiesel blend. The study found that using 5% butanol as an additive with B5 (5% Palm biodiesel + 95% diesel) blends fuel lowers brake specific fuel consumption and CO emissions by 38% and 20% respectively. But the addition of butanol increases NOx and CO2 emissions. Based on the result it can be said that 5% butanol can be used in a diesel engine with B5 without any engine modifications to tackle the idling problem.

  20. Deterministic modelling and stochastic simulation of biochemical pathways using MATLAB.

    Science.gov (United States)

    Ullah, M; Schmidt, H; Cho, K H; Wolkenhauer, O

    2006-03-01

    The analysis of complex biochemical networks is conducted in two popular conceptual frameworks for modelling. The deterministic approach requires the solution of ordinary differential equations (ODEs, reaction rate equations) with concentrations as continuous state variables. The stochastic approach involves the simulation of differential-difference equations (chemical master equations, CMEs) with probabilities as variables. This is to generate counts of molecules for chemical species as realisations of random variables drawn from the probability distribution described by the CMEs. Although there are numerous tools available, many of them free, the modelling and simulation environment MATLAB is widely used in the physical and engineering sciences. We describe a collection of MATLAB functions to construct and solve ODEs for deterministic simulation and to implement realisations of CMEs for stochastic simulation using advanced MATLAB coding (Release 14). The program was successfully applied to pathway models from the literature for both cases. The results were compared to implementations using alternative tools for dynamic modelling and simulation of biochemical networks. The aim is to provide a concise set of MATLAB functions that encourage the experimentation with systems biology models. All the script files are available from www.sbi.uni-rostock.de/ publications_matlab-paper.html.

  1. Effect of leaving milk trucks empty and idle for 6 h between raw milk loads.

    Science.gov (United States)

    Kuhn, Eva; Meunier-Goddik, Lisbeth; Waite-Cusic, Joy G

    2018-02-01

    The US Pasteurized Milk Ordinance (PMO) allows milk tanker trucks to be used repeatedly for 24 h before mandatory clean-in-place cleaning, but no specifications are given for the length of time a tanker can be empty between loads. We defined a worst-case hauling scenario as a hauling vessel left empty and dirty (idle) for extended periods between loads, especially in warm weather. Initial studies were conducted using 5-gallon milk cans (pilot-scale) as a proof-of-concept and to demonstrate that extended idle time intervals could contribute to compromised raw milk quality. Based on pilot-scale results, a commercial hauling study was conducted through partnership with a Pacific Northwest dairy co-op to verify that extended idle times of 6 h between loads have minimal influence on the microbiological populations and enzyme activity in subsequent loads of milk. Milk cans were used to haul raw milk (load 1), emptied, incubated at 30°C for 3, 6, 10, and 20 h, and refilled with commercially pasteurized whole milk (load 2) to measure cross-contamination. For the commercial-scale study, a single tanker was filled with milk from a farm known to have poorer quality milk (farm A, load 1), emptied, and refilled immediately (0 h) or after a delay (6 h) with milk from a farm known to have superior quality milk (farm B, load 2). In both experiments, milk samples were obtained from each farm's bulk tank and from the milk can or tanker before unloading. Each sample was microbiologically assessed for standard plate count (SPC), lactic acid bacteria (LAB), and coliform counts. Selected isolates were assessed for lipolytic and proteolytic activity using spirit blue agar and skim milk agar, respectively. The pilot-scale experiment effectively demonstrated that extended periods of idle (>3 h) of soiled hauling vessels can significantly affect the microbiological quality of raw milk in subsequent loads; however, extended idle times of 6 h or less would not measurably compromise milk

  2. Reduction of atmospheric fine particle level by restricting the idling vehicles around a sensitive area.

    Science.gov (United States)

    Lee, Yen-Yi; Lin, Sheng-Lun; Yuan, Chung-Shin; Lin, Ming-Yeng; Chen, Kang-Shin

    2018-07-01

    Atmospheric particles are a major problem that could lead to harmful effects on human health, especially in densely populated urban areas. Chiayi is a typical city with very high population and traffic density, as well as being located at the downwind side of several pollution sources. Multiple contributors for PM 2.5 (particulate matter with an aerodynamic diameter ≥2.5 μm) and ultrafine particles cause complicated air quality problems. This study focused on the inhibition of local emission sources by restricting the idling vehicles around a school area and evaluating the changes in surrounding atmospheric PM conditions. Two stationary sites were monitored, including a background site on the upwind side of the school and a campus site inside the school, to monitor the exposure level, before and after the idling prohibition. In the base condition, the PM 2.5  mass concentrations were found to increase 15% from the background, whereas the nitrate (NO 3 - ) content had a significant increase at the campus site. The anthropogenic metal contents in PM 2.5 were higher at the campus site than the background site. Mobile emissions were found to be the most likely contributor to the school hot spot area by chemical mass balance modeling (CMB8.2). On the other hand, the PM 2.5 in the school campus fell to only 2% after idling vehicle control, when the mobile source contribution reduced from 42.8% to 36.7%. The mobile monitoring also showed significant reductions in atmospheric PM 2.5 , PM 0.1 , polycyclic aromatic hydrocarbons (PAHs), and black carbon (BC) levels by 16.5%, 33.3%, 48.0%, and 11.5%, respectively. Consequently, the restriction of local idling emission was proven to significantly reduce PM and harmful pollutants in the hot spots around the school environment. The emission of idling vehicles strongly affects the levels of particles and relative pollutants in near-ground air around a school area. The PM 2.5 mass concentration at a campus site increased from

  3. Piezoelectric Actuator Modeling Using MSC/NASTRAN and MATLAB

    Science.gov (United States)

    Reaves, Mercedes C.; Horta, Lucas G.

    2003-01-01

    This paper presents a procedure for modeling structures containing piezoelectric actuators using MSCMASTRAN and MATLAB. The paper describes the utility and functionality of one set of validated modeling tools. The tools described herein use MSCMASTRAN to model the structure with piezoelectric actuators and a thermally induced strain to model straining of the actuators due to an applied voltage field. MATLAB scripts are used to assemble the dynamic equations and to generate frequency response functions. The application of these tools is discussed using a cantilever aluminum beam with a surface mounted piezoelectric actuator as a sample problem. Software in the form of MSCINASTRAN DMAP input commands, MATLAB scripts, and a step-by-step procedure to solve the example problem are provided. Analysis results are generated in terms of frequency response functions from deflection and strain data as a function of input voltage to the actuator.

  4. Effective approach to spectroscopy and spectral analysis techniques using Matlab

    Science.gov (United States)

    Li, Xiang; Lv, Yong

    2017-08-01

    With the development of electronic information, computer and network, modern education technology has entered new era, which would give a great impact on teaching process. Spectroscopy and spectral analysis is an elective course for Optoelectronic Information Science and engineering. The teaching objective of this course is to master the basic concepts and principles of spectroscopy, spectral analysis and testing of basic technical means. Then, let the students learn the principle and technology of the spectrum to study the structure and state of the material and the developing process of the technology. MATLAB (matrix laboratory) is a multi-paradigm numerical computing environment and fourth-generation programming language. A proprietary programming language developed by MathWorks, MATLAB allows matrix manipulations, plotting of functions and data, Based on the teaching practice, this paper summarizes the new situation of applying Matlab to the teaching of spectroscopy. This would be suitable for most of the current school multimedia assisted teaching

  5. Introduction to multifractal detrended fluctuation analysis in matlab.

    Science.gov (United States)

    Ihlen, Espen A F

    2012-01-01

    Fractal structures are found in biomedical time series from a wide range of physiological phenomena. The multifractal spectrum identifies the deviations in fractal structure within time periods with large and small fluctuations. The present tutorial is an introduction to multifractal detrended fluctuation analysis (MFDFA) that estimates the multifractal spectrum of biomedical time series. The tutorial presents MFDFA step-by-step in an interactive Matlab session. All Matlab tools needed are available in Introduction to MFDFA folder at the website www.ntnu.edu/inm/geri/software. MFDFA are introduced in Matlab code boxes where the reader can employ pieces of, or the entire MFDFA to example time series. After introducing MFDFA, the tutorial discusses the best practice of MFDFA in biomedical signal processing. The main aim of the tutorial is to give the reader a simple self-sustained guide to the implementation of MFDFA and interpretation of the resulting multifractal spectra.

  6. Elements of matrix modeling and computing with Matlab

    CERN Document Server

    White, Robert E

    2006-01-01

    As discrete models and computing have become more common, there is a need to study matrix computation and numerical linear algebra. Encompassing a diverse mathematical core, Elements of Matrix Modeling and Computing with MATLAB examines a variety of applications and their modeling processes, showing you how to develop matrix models and solve algebraic systems. Emphasizing practical skills, it creates a bridge from problems with two and three variables to more realistic problems that have additional variables. Elements of Matrix Modeling and Computing with MATLAB focuses on seven basic applicat

  7. KEGGParser: parsing and editing KEGG pathway maps in Matlab.

    Science.gov (United States)

    Arakelyan, Arsen; Nersisyan, Lilit

    2013-02-15

    KEGG pathway database is a collection of manually drawn pathway maps accompanied with KGML format files intended for use in automatic analysis. KGML files, however, do not contain the required information for complete reproduction of all the events indicated in the static image of a pathway map. Several parsers and editors of KEGG pathways exist for processing KGML files. We introduce KEGGParser-a MATLAB based tool for KEGG pathway parsing, semiautomatic fixing, editing, visualization and analysis in MATLAB environment. It also works with Scilab. The source code is available at http://www.mathworks.com/matlabcentral/fileexchange/37561.

  8. Rapid BeagleBoard prototyping with MATLAB and Simulink

    CERN Document Server

    Qin, Fei

    2013-01-01

    This book is a fast-paced guide with practical, hands-on recipes which will show you how to prototype Beagleboard-based audio/video applications using Matlab/Simlink and Sourcery Codebench on a Windows host.Beagleboard Embedded Projects is great for students and academic researchers who have practical ideas and who want to build a proof-of-concept system on an embedded hardware platform quickly and efficiently. It is also useful for product design engineers who want to ratify their applications and reduce the time-to-market. It is assumed that you are familiar with Matlab/Simulink and have som

  9. Kinematic simulation and analysis of robot based on MATLAB

    Science.gov (United States)

    Liao, Shuhua; Li, Jiong

    2018-03-01

    The history of industrial automation is characterized by quick update technology, however, without a doubt, the industrial robot is a kind of special equipment. With the help of MATLAB matrix and drawing capacity in the MATLAB environment each link coordinate system set up by using the d-h parameters method and equation of motion of the structure. Robotics, Toolbox programming Toolbox and GUIDE to the joint application is the analysis of inverse kinematics and path planning and simulation, preliminary solve the problem of college students the car mechanical arm positioning theory, so as to achieve the aim of reservation.

  10. Modelling real solar cell using PSCAD/MATLAB

    Energy Technology Data Exchange (ETDEWEB)

    Ramos, Sergio; Silva, Marco; Fernandes, Filipe; Vale, Zita [Polytechnic of Porto (Portugal). GECAD - Knowledge Engineering and Decision Support Research Center

    2012-07-01

    This paper presents the development of a solar photovoltaic (PV) model based on PSCAD/EMTDC - Power System Computer Aided Design - including a mathematical model study. An additional algorithm has been implemented in MATLAB software in order to calculate several parameters required by the PSCAD developed model. All the simulation study has been performed in PSCAD/MATLAB software simulation tool. A real data base concerning irradiance, cell temperature and PV power generation was used in order to support the evaluation of the implemented PV model. (orig.)

  11. Instruction of pattern recognition by MATLAB practice 1

    International Nuclear Information System (INIS)

    1999-06-01

    This book describes the pattern recognition by MATLAB practice. It includes possibility and limit of AI, introduction of pattern recognition a vector and matrix, basic status and a probability theory, a random variable and probability distribution, statistical decision theory, data-mining, gaussian mixture model, a nerve cell modeling such as Hebb's learning rule, LMS learning rule, genetic algorithm, dynamic programming and DTW, HMN on Markov model and HMM's three problems and solution, introduction of SVM with KKT condition and margin optimum, kernel trick and MATLAB practice.

  12. Estimating aquifer transmissivity from specific capacity using MATLAB.

    Science.gov (United States)

    McLin, Stephen G

    2005-01-01

    Historically, specific capacity information has been used to calculate aquifer transmissivity when pumping test data are unavailable. This paper presents a simple computer program written in the MATLAB programming language that estimates transmissivity from specific capacity data while correcting for aquifer partial penetration and well efficiency. The program graphically plots transmissivity as a function of these factors so that the user can visually estimate their relative importance in a particular application. The program is compatible with any computer operating system running MATLAB, including Windows, Macintosh OS, Linux, and Unix. Two simple examples illustrate program usage.

  13. xdamp Version 4: An IDL Based Data and Image Manipulation Program

    International Nuclear Information System (INIS)

    William P. Ballard

    2002-01-01

    The original DAMP (W t a Manipulation Program) was written by Mark Hedemann of Sandia National Laboratories and used the CA-DISSPLA(trademark) (available from Computer Associates International, Inc., Garden City, NY) graphics package as its engine. It was used to plot, modify, and otherwise manipulate the one-dimensional data waveforms (data vs. time) from a wide variety of accelerators. With the waning of CA-DISSPLA and the increasing popularity of Unix(reg s ign)-based workstations, a replacement was needed. This package uses the IDL(reg s ign) software, available from Research Systems Incorporated, a Xerox company, in Boulder, Colorado, as the engine, and creates a set of widgets to manipulate the data in a manner similar to the original DAMP and earlier versions of xdamp. IDL is currently supported on a wide variety of Unix platforms such as IBM(reg s ign) workstations, Hewlett Packard workstations, SUN(reg s ign) workstations, Microsoft(reg s ign) Windows(trademark) computers, Macintosh(reg s ign) computers and Digital Equipment Corporation VMS(reg s ign) and Alpha(reg s ign) systems. Thus, xdamp is portable across many platforms. We have verified operation, albeit with some minor IDL bugs, on personal computers using Windows 95 and Windows NT; IBM Unix platforms; DEC Alpha and VMS systems; HP 9000/700 series workstations; and Macintosh computers, both regular and PowerPC(trademark) versions. Version 4 is an update that removes some obsolete features and better supports very large arrays and Excel formatted data import

  14. Novel 3D Approach to Flare Modeling via Interactive IDL Widget Tools

    Science.gov (United States)

    Nita, G. M.; Fleishman, G. D.; Gary, D. E.; Kuznetsov, A.; Kontar, E. P.

    2011-12-01

    Currently, and soon-to-be, available sophisticated 3D models of particle acceleration and transport in solar flares require a new level of user-friendly visualization and analysis tools allowing quick and easy adjustment of the model parameters and computation of realistic radiation patterns (images, spectra, polarization, etc). We report the current state of the art of these tools in development, already proved to be highly efficient for the direct flare modeling. We present an interactive IDL widget application intended to provide a flexible tool that allows the user to generate spatially resolved radio and X-ray spectra. The object-based architecture of this application provides full interaction with imported 3D magnetic field models (e.g., from an extrapolation) that may be embedded in a global coronal model. Various tools provided allow users to explore the magnetic connectivity of the model by generating magnetic field lines originating in user-specified volume positions. Such lines may serve as reference lines for creating magnetic flux tubes, which are further populated with user-defined analytical thermal/non thermal particle distribution models. By default, the application integrates IDL callable DLL and Shared libraries containing fast GS emission codes developed in FORTRAN and C++ and soft and hard X-ray codes developed in IDL. However, the interactive interface allows interchanging these default libraries with any user-defined IDL or external callable codes designed to solve the radiation transfer equation in the same or other wavelength ranges of interest. To illustrate the tool capacity and generality, we present a step-by-step real-time computation of microwave and X-ray images from realistic magnetic structures obtained from a magnetic field extrapolation preceding a real event, and compare them with the actual imaging data obtained by NORH and RHESSI instruments. We discuss further anticipated developments of the tools needed to accommodate

  15. Research on Turbofan Engine Model above Idle State Based on NARX Modeling Approach

    Science.gov (United States)

    Yu, Bing; Shu, Wenjun

    2017-03-01

    The nonlinear model for turbofan engine above idle state based on NARX is studied. Above all, the data sets for the JT9D engine from existing model are obtained via simulation. Then, a nonlinear modeling scheme based on NARX is proposed and several models with different parameters are built according to the former data sets. Finally, the simulations have been taken to verify the precise and dynamic performance the models, the results show that the NARX model can well reflect the dynamics characteristic of the turbofan engine with high accuracy.

  16. GNU Data Language (GDL) - a free and open-source implementation of IDL

    Science.gov (United States)

    Arabas, Sylwester; Schellens, Marc; Coulais, Alain; Gales, Joel; Messmer, Peter

    2010-05-01

    GNU Data Language (GDL) is developed with the aim of providing an open-source drop-in replacement for the ITTVIS's Interactive Data Language (IDL). It is free software developed by an international team of volunteers led by Marc Schellens - the project's founder (a list of contributors is available on the project's website). The development is hosted on SourceForge where GDL continuously ranks in the 99th percentile of most active projects. GDL with its library routines is designed as a tool for numerical data analysis and visualisation. As its proprietary counterparts (IDL and PV-WAVE), GDL is used particularly in geosciences and astronomy. GDL is dynamically-typed, vectorized and has object-oriented programming capabilities. The library routines handle numerical calculations, data visualisation, signal/image processing, interaction with host OS and data input/output. GDL supports several data formats such as netCDF, HDF4, HDF5, GRIB, PNG, TIFF, DICOM, etc. Graphical output is handled by X11, PostScript, SVG or z-buffer terminals, the last one allowing output to be saved in a variety of raster graphics formats. GDL is an incremental compiler with integrated debugging facilities. It is written in C++ using the ANTLR language-recognition framework. Most of the library routines are implemented as interfaces to open-source packages such as GNU Scientific Library, PLPlot, FFTW, ImageMagick, and others. GDL features a Python bridge (Python code can be called from GDL; GDL can be compiled as a Python module). Extensions to GDL can be written in C++, GDL, and Python. A number of open software libraries written in IDL, such as the NASA Astronomy Library, MPFIT, CMSVLIB and TeXtoIDL are fully or partially functional under GDL. Packaged versions of GDL are available for several Linux distributions and Mac OS X. The source code compiles on some other UNIX systems, including BSD and OpenSolaris. The presentation will cover the current status of the project, the key

  17. Vectorized Matlab Codes for Linear Two-Dimensional Elasticity

    Directory of Open Access Journals (Sweden)

    Jonas Koko

    2007-01-01

    Full Text Available A vectorized Matlab implementation for the linear finite element is provided for the two-dimensional linear elasticity with mixed boundary conditions. Vectorization means that there is no loop over triangles. Numerical experiments show that our implementation is more efficient than the standard implementation with a loop over all triangles.

  18. A linear algebra course with PC-MATLAB : some experiences

    NARCIS (Netherlands)

    Smits, J.G.M.M.; Rijpkema, J.J.M.

    1992-01-01

    The authors present their views on the impact that the use of computers and software packages should have on the contents of a first service course on linear algebra. Furthermore they report on their experiences using the software package PC-MATLAB in such a course.

  19. Simulaser, a graphical laser simulator based on Matlab Simulink

    CSIR Research Space (South Africa)

    Jacobs, Cobus

    2016-07-01

    Full Text Available We present a single-element plane-wave laser rate equation model and its implementation as a graphical laser simulation library using Matlab Simulink. Simulink’s graphical interface and vector capabilities provide a unique layer of abstraction...

  20. Introduction of pattern recognition by MATLAB practice 2

    International Nuclear Information System (INIS)

    1999-06-01

    The contents of this book starts introduction and examples of pattern recognition. This book describes a vector and matrix, basic statistics and a probability distribution, statistical decision theory and probability density function, liner shunt, vector quantizing and clustering GMM, PCA and KL conversion, LDA, ID 3, a nerve cell modeling, HMM, SVM and Ada boost. It has direction of MATLAB in the appendix.

  1. MATLAB simulation for an experimental setup of digital feedback control

    International Nuclear Information System (INIS)

    Zheng Lifang; Liu Songqiang

    2005-01-01

    This paper describes the digital feedback simulation using MATLAB for an experimental accelerator control setup. By analyzing the plant characteristic in time-domain and frequency-domain, a guideline for design of digital filter and PID controller is derived. (authors)

  2. NNCTRL - a CANCSD toolkit for MATLAB(R)

    DEFF Research Database (Denmark)

    Nørgård, Peter Magnus; Ravn, Ole; Poulsen, Niels Kjølstad

    1996-01-01

    A set of tools for computer-aided neuro-control system design (CANCSD) has been developed for the MATLAB environment. The tools can be used for construction and simulation of a variety of neural network based control systems. The design methods featured in the toolkit are: direct inverse control...

  3. Benchmark Simulation Model No 2 in Matlab-Simulink

    DEFF Research Database (Denmark)

    Vrecko, Darko; Gernaey, Krist; Rosen, Christian

    2006-01-01

    In this paper, implementation of the Benchmark Simulation Model No 2 (BSM2) within Matlab-Simulink is presented. The BSM2 is developed for plant-wide WWTP control strategy evaluation on a long-term basis. It consists of a pre-treatment process, an activated sludge process and sludge treatment...

  4. The Church of St. Stephan on Šćepan polje near Soko-grad

    Directory of Open Access Journals (Sweden)

    Popović Marko

    2007-01-01

    Full Text Available The Church of St. Stephan, in this paper, belonged to a medieval residential complex above the confluence of the River Piva and the River Tara, in the extreme northeast of the present-day Republic of Montenegro. The central part of the complex consisted of Soko-grad, a castle with the court of the prominent, aristocratic, Kosača family, which, at the end of the 14th century, right until the Turkish conquests in the sixties and seventies of the 15th century, ruled the regions later known as Hercegovina. At the foot of the castle, on Šćepan polje, is the suburb with the Church of St. Stephan the endowment of the grand duke, Sandalj Hranić (+1345. At the foot of the northern slope, beneath the castle, in the area of Zagrađa, is another church erected by the grand duke's successor, Herzeg Stefan Vukćić Kosača (+1465. After the Turkish conquest, the complex of the Soko castle with its suburb was destroyed and the churches became deserted and were never renewed. The ruins of St. Stephan were discovered, investigated and then conserved from 1971-973, however, the results of this research have not been published until now. In reviewing the results obtained in the course of the archaeological excavations, it is possible, in a considerable measure, to comprehend the position and former appearance of the Church of St. Stephan and establish roughly, the time when it came into being. This was the largest church erected in the regions governed by the powerful, Kosača noble family, during the 15th century. The total length of the church exceeded 25 metres and its width was approximately ten metres. In the preserved body of the construction, of which the remaining walls rise to a height of four metres one may see three basic stages of building. A narthex was later erected beside the church, and subsequently a small parakklesion was added, on the northern side. The original church had a single nave, a cruciform base and a gently, horseshoe-shaped apsis

  5. Open Source Power Plant Simulator Development Under Matlab Environment

    International Nuclear Information System (INIS)

    Ratemi, W.M.; Fadilah, S.M.; Abonoor, N

    2008-01-01

    In this paper an open source programming approach is targeted for the development of power plant simulator under Matlab environment. With this approach many individuals can contribute to the development of the simulator by developing different orders of complexities of the power plant components. Such modules can be modeled based on physical principles, or using neural networks or other methods. All of these modules are categorized in Matlab library, of which the user can select and build up his simulator. Many international companies developed its own authoring tool for the development of its simulators, and hence it became its own property available for high costs. Matlab is a general software developed by mathworks that can be used with its toolkits as the authoring tool for the development of components by different individuals, and through the appropriate coordination, different plant simulators, nuclear, traditional , or even research reactors can be computerly assembled. In this paper, power plant components such as a pressurizer, a reactor, a steam generator, a turbine, a condenser, a feedwater heater, a valve, a pump are modeled based on physical principles. Also a prototype modeling of a reactor ( a scram case) based on neural networks is developed. These modules are inserted in two different Matlab libraries one called physical and the other is called neural. Furthermore, during the simulation one can pause and shuffle the modules selected from the two libraries and then proceed the simulation. Also, under the Matlab environment a PID controller is developed for multi-loop plant which can be integrated for the control of the appropriate developed simulator. This paper is an attempt to base the open source approach for the development of power plant simulators or even research reactor simulators. It then requires the coordination among interested individuals or institutions to set it to professionalism. (author)

  6. MATLAB as a tool as Analysis and Problem Solving Competency Development in Chemical Engineering Degree using MATLAB

    Directory of Open Access Journals (Sweden)

    Maria-Fernanda López-Pérez

    2016-10-01

    The principal purpose of this work is the students improvement using, as has been mentioned previously, MATLAB in a problem-based learning methodology. This methodology allows a more effective coordination in the degree. The present paper presents a real- world problem and the common elements of most problem-solving contexts and how is designed to function across all disciplines.

  7. xdamp Version 6.100: An IDL(reg sign)-based data and image manipulation program

    International Nuclear Information System (INIS)

    Ballard, William Parker

    2012-01-01

    The original DAMP (DAta Manipulation Program) was written by Mark Hedemann of Sandia National Laboratories and used the CA-DISSPLA(trademark) (available from Computer Associates International, Inc., Garden City, NY) graphics package as its engine. It was used to plot, modify, and otherwise manipulate the one-dimensional data waveforms (data vs. time) from a wide variety of accelerators. With the waning of CA-DISSPLA and the increasing popularity of Unix(reg sign)-based workstations, a replacement was needed. This package uses the IDL(reg sign) software, available from Research Systems Incorporated, a Xerox company, in Boulder, Colorado, as the engine, and creates a set of widgets to manipulate the data in a manner similar to the original DAMP and earlier versions of xdamp. IDL is currently supported on a wide variety of Unix platforms such as IBM(reg sign) workstations, Hewlett Packard workstations, SUN(reg sign) workstations, Microsoft(reg sign) Windows(trademark) computers, Macintosh(reg sign) computers and Digital Equipment Corporation VMS(reg sign) and Alpha(reg sign) systems. Thus, xdamp is portable across many platforms. We have verified operation, albeit with some minor IDL bugs, on personal computers using Windows 7 and Windows Vista; Unix platforms; and Macintosh computers. Version 6 is an update that uses the IDL Virtual Machine to resolve the need for licensing IDL.

  8. Network robustness assessed within a dual connectivity framework: joint dynamics of the Active and Idle Networks.

    Science.gov (United States)

    Tejedor, Alejandro; Longjas, Anthony; Zaliapin, Ilya; Ambroj, Samuel; Foufoula-Georgiou, Efi

    2017-08-17

    Network robustness against attacks has been widely studied in fields as diverse as the Internet, power grids and human societies. But current definition of robustness is only accounting for half of the story: the connectivity of the nodes unaffected by the attack. Here we propose a new framework to assess network robustness, wherein the connectivity of the affected nodes is also taken into consideration, acknowledging that it plays a crucial role in properly evaluating the overall network robustness in terms of its future recovery from the attack. Specifically, we propose a dual perspective approach wherein at any instant in the network evolution under attack, two distinct networks are defined: (i) the Active Network (AN) composed of the unaffected nodes and (ii) the Idle Network (IN) composed of the affected nodes. The proposed robustness metric considers both the efficiency of destroying the AN and that of building-up the IN. We show, via analysis of well-known prototype networks and real world data, that trade-offs between the efficiency of Active and Idle Network dynamics give rise to surprising robustness crossovers and re-rankings, which can have significant implications for decision making.

  9. xdamp Version 4 An IDL Based Data and Image Manipulation Program

    CERN Document Server

    William-Ballar, P

    2002-01-01

    The original DAMP (W t a Manipulation Program) was written by Mark Hedemann of Sandia National Laboratories and used the CA-DISSPLA(trademark) (available from Computer Associates International, Inc., Garden City, NY) graphics package as its engine. It was used to plot, modify, and otherwise manipulate the one-dimensional data waveforms (data vs. time) from a wide variety of accelerators. With the waning of CA-DISSPLA and the increasing popularity of Unix(reg sub s ign)-based workstations, a replacement was needed. This package uses the IDL(reg sub s ign) software, available from Research Systems Incorporated, a Xerox company, in Boulder, Colorado, as the engine, and creates a set of widgets to manipulate the data in a manner similar to the original DAMP and earlier versions of xdamp. IDL is currently supported on a wide variety of Unix platforms such as IBM(reg sub s ign) workstations, Hewlett Packard workstations, SUN(reg sub s ign) workstations, Microsoft(reg sub s ign) Windows(trademark) computers, Macinto...

  10. Flight Management System Execution of Idle-Thrust Descents in Operations

    Science.gov (United States)

    Stell, Laurel L.

    2011-01-01

    To enable arriving aircraft to fly optimized descents computed by the flight management system (FMS) in congested airspace, ground automation must accurately predict descent trajectories. To support development of the trajectory predictor and its error models, commercial flights executed idle-thrust descents, and the recorded data includes the target speed profile and FMS intent trajectories. The FMS computes the intended descent path assuming idle thrust after top of descent (TOD), and any intervention by the controllers that alters the FMS execution of the descent is recorded so that such flights are discarded from the analysis. The horizontal flight path, cruise and meter fix altitudes, and actual TOD location are extracted from the radar data. Using more than 60 descents in Boeing 777 aircraft, the actual speeds are compared to the intended descent speed profile. In addition, three aspects of the accuracy of the FMS intent trajectory are analyzed: the meter fix crossing time, the TOD location, and the altitude at the meter fix. The actual TOD location is within 5 nmi of the intent location for over 95% of the descents. Roughly 90% of the time, the airspeed is within 0.01 of the target Mach number and within 10 KCAS of the target descent CAS, but the meter fix crossing time is only within 50 sec of the time computed by the FMS. Overall, the aircraft seem to be executing the descents as intended by the designers of the onboard automation.

  11. Image enhancement by using IDL for a mammographic x-ray image in Medical Physics Laboratory

    International Nuclear Information System (INIS)

    Asmaliza Hashim; Md Saion Salikin; Wan Hazlinda Ismail; Norriza Mohd Isa; Azuhar Ripin

    2004-01-01

    Digital image enhancement technique can have a significant impact on the diagnostic quality of a radiographic image. The main aim of image enhancement is to process the image so that the enhanced image is clearer and more useful for specific application. There are three types of image enhancement namely noise reduction, edge enhancement and contrast enhancement. The objective of this project is to enhance the mammographic image by using Interactive Data Language (IDL) software in spatial and frequency domain by using various methods. In spatial domain method, direct manipulation of pixel in an image is used whereas, in frequency domain method, modifying the spectral component or Fourier Transform of an image is used In order to obtain the good quality mammographic image, breast phantom Model 12A with 4.0 cm compressed thickness and Bennett Model DMF- 150 Mammography Machine with various kV and mA are employed. The results of enhanced image with selected technique by using IDL are presented in this paper. (Author)

  12. Low IDL-B and high LDL-1 subfraction levels in serum of ALS patients.

    Science.gov (United States)

    Delaye, J B; Patin, F; Piver, E; Bruno, C; Vasse, M; Vourc'h, P; Andres, C R; Corcia, P; Blasco, H

    2017-09-15

    Converging evidence highlights that lipid metabolism plays a key role in ALS pathophysiology. Dyslipidemia has been described in ALS patients and may be protective but peripheral lipoprotein subclasses have never been studied. We collected sera from 30 ALS patients and 30 gender and age-matched controls. We analyzed 11 distinct lipoprotein subclasses by linear polyacrylamide gel electrophoresis (Lipoprint, Quantimetrix Corporation, USA). We also measured lipoprotein (a), apolipoprotein B, and apolipoprotein E levels. ALS patients had significant higher total cholesterol, HDL-cholesterol, and LDL-cholesterol levels than controls (pALS patients than controls. Our preliminary work confirmed the association between ALS and dyslipidemia. The low IDL-B levels may explain the hepatic steatosis frequently reported in ALS. The high levels of the cholesterol-rich LDL-1 subfraction is consistent with previously reported hypercholesterolemia. This study describes, for the first time, the distribution of serum lipoproteins in ALS patients, with low IDL-B and high LDL-1 subfraction level. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. DPPC/poly(2-methyl-2-oxazoline)-grad-poly(2-phenyl-2-oxazoline) chimeric nanostructures as potential drug nanocarriers

    Energy Technology Data Exchange (ETDEWEB)

    Pippa, Natassa [Faculty of Pharmacy, National and Kapodistrian University of Athens, Department of Pharmaceutical Technology (Greece); Kaditi, Eleni; Pispas, Stergios [Theoretical and Physical Chemistry Institute, National Hellenic Research Foundation (Greece); Demetzos, Costas, E-mail: demetzos@pharm.uoa.gr [Faculty of Pharmacy, National and Kapodistrian University of Athens, Department of Pharmaceutical Technology (Greece)

    2013-06-15

    In this study, we report on the self assembly behavior and on stability studies of mixed (chimeric) nanosystems consisting of dipalmitoylphosphatidylcholine (DPPC) and poly(2-methyl-2-oxazoline)-grad-poly(2-phenyl-2-oxazoline) (MPOx) gradient copolymer in aqueous media and in fetal bovine serum (FBS). A gamut of light scattering techniques and fluorescence spectroscopy were used in order to extract information on the size and morphological characteristics of the nanoassemblies formed, as a function of gradient block copolymer content, as well as temperature. The hydrodynamic radii (R{sub h}) of nanoassemblies decreased in the process of heating up to 50 Degree-Sign C, while the fractal dimension (d{sub f}) values, also increased. Indomethacin was successfully incorporated into these chimeric nanocarriers. Drug release was depended on the components ratio. The present studies show that there are a number of parameters that can be used in order to alter the properties of chimeric nanosystems, and this is advantageous to the development of 'smart' nanocarriers for drug delivery.

  14. DPPC/poly(2-methyl-2-oxazoline)-grad-poly(2-phenyl-2-oxazoline) chimeric nanostructures as potential drug nanocarriers

    International Nuclear Information System (INIS)

    Pippa, Natassa; Kaditi, Eleni; Pispas, Stergios; Demetzos, Costas

    2013-01-01

    In this study, we report on the self assembly behavior and on stability studies of mixed (chimeric) nanosystems consisting of dipalmitoylphosphatidylcholine (DPPC) and poly(2-methyl-2-oxazoline)-grad-poly(2-phenyl-2-oxazoline) (MPOx) gradient copolymer in aqueous media and in fetal bovine serum (FBS). A gamut of light scattering techniques and fluorescence spectroscopy were used in order to extract information on the size and morphological characteristics of the nanoassemblies formed, as a function of gradient block copolymer content, as well as temperature. The hydrodynamic radii (R h ) of nanoassemblies decreased in the process of heating up to 50 °C, while the fractal dimension (d f ) values, also increased. Indomethacin was successfully incorporated into these chimeric nanocarriers. Drug release was depended on the components ratio. The present studies show that there are a number of parameters that can be used in order to alter the properties of chimeric nanosystems, and this is advantageous to the development of “smart” nanocarriers for drug delivery.

  15. New insights into urban planning of Caričin Grad: The application of modern sensing and detection methods

    Directory of Open Access Journals (Sweden)

    Ivanišević Vujadin

    2016-01-01

    Full Text Available Caričin Grad, Justiniana Prima, urban planning, fortification, settlement, aerial photography, geophysical surveys, LiDAR, photogrammetry, excavations, GIS. Thanks to the application of modern non-destructive sensing and detection methods, in recent years a series of new data on urban planning in Caričin Grad was obtained. For the most part, the current research programme studies the Upper Town’s northern plateau, wooded until recently and hence the only previously unexplored unit of the city. In the course of this programme, the classical research method - the excavations started in 2009 - is for the first time combined with the systematic application of airborne and terrestrial sensing and detection techniques. The analysis of historic aerial photographs and topographic plans proved to be very useful as well. Along with them, LiDAR-derived DTMs, photogrammetric DEMs, different geophysical and orthophotographic plans are stored in the GIS database for Caričin Grad and the Leskovac Basin. In this way almost 80 percent of the plateau area was defined, and the obtained plan is hypothetical only to a small extent, which particularly refers to the unexcavated northern rampart of the Upper Town. Each source provided relevant information for the reconstruction of both the rampart and the settlement, which points to the value of a holistic approach to documentation from various dates. The first source to be studied were archival aerial photographs of Caričin Grad from 1938 and 1947 (Figs. 1, 2.1. The latter one was originally processed by Aleksandar Deroko and Svetozar Radojči}, who drew the plan of the town after it, labelling the unexplored Upper Town’s northern plateau as “a probable habitation area”. The route of the northern rampart was aslo rather precisely determined by the authors (Fig. 2.2. Recently, these photographs were rectified and georeferenced in the GIS. The 1938 shot reveals the position of some towers as well, and it is

  16. Base Input - Enrollment and Graduation Data for Naval Postgraduate School for the School of Business and Public Policy, Meyer Institute of Systems Engineering, and PhD Grads by curriculum by year.

    OpenAIRE

    2005-01-01

    Graphs of Base Input - Enrollment and Graduation Data for Naval Postgraduate School for the School of Business and Public Policy, Meyer Institute of Systems Engineering, and PhD Grads by curriculum by year.

  17. Computational mathematics models, methods, and analysis with Matlab and MPI

    CERN Document Server

    White, Robert E

    2004-01-01

    Computational Mathematics: Models, Methods, and Analysis with MATLAB and MPI explores and illustrates this process. Each section of the first six chapters is motivated by a specific application. The author applies a model, selects a numerical method, implements computer simulations, and assesses the ensuing results. These chapters include an abundance of MATLAB code. By studying the code instead of using it as a "black box, " you take the first step toward more sophisticated numerical modeling. The last four chapters focus on multiprocessing algorithms implemented using message passing interface (MPI). These chapters include Fortran 9x codes that illustrate the basic MPI subroutines and revisit the applications of the previous chapters from a parallel implementation perspective. All of the codes are available for download from www4.ncsu.edu./~white.This book is not just about math, not just about computing, and not just about applications, but about all three--in other words, computational science. Whether us...

  18. Integration of Modeling in Solidworks and Matlab/Simulink Environments

    Directory of Open Access Journals (Sweden)

    Cekus Dawid

    2014-03-01

    Full Text Available W pracy opisano tok postepowania podczas budowy modeli symulacyjnych z wykorzystaniem programu SolidWorks i Matlab/Simulink. Tworzenie modelu symulacyjnego przebiega etapami, to znaczy najpierw opracowywany jest model geometryczny w programie SolidWorks, nastepnie dzieki mozliwosci wymiany danych, model CAD jest implementowany w srodowisku obliczeniowym Matlab/Simulink. Modele SimMechanics pozwalaja na sledzenie wielu parametrów, np. trajektorii, predkosci, czy przyspieszen dowolnych elementów układu złozonego. W pracy, jako przykłady modeli symulacyjnych opracowanych zgodnie z zaprezentowana metoda, pokazano modele laboratoryjnego zurawia samochodowego oraz zurawia lesnego. Modele te umozliwiaja wizualizacje zadanego - za pomoca wymuszen kinematycznych - cyklu pracy.

  19. Calcolo scientifico esercizi e problemi risolti con Matlab e Octave

    CERN Document Server

    Quarteroni, Alfio; Gervasio, Paola

    2017-01-01

    Questo testo è concepito per i corsi delle Facoltà di Ingegneria e di Scienze. Esso affronta tutti gli argomenti tipici della Matematica Numerica, spaziando dal problema di risolvere sistemi di equazioni lineari e non lineari a quello di approssimare una funzione, di calcolare i suoi minimi, le sue derivate ed il suo integrale definito fino alla risoluzione di equazioni differenziali ordinarie e alle derivate parziali con metodi alle differenze finite ed agli elementi finiti. Un capitolo iniziale conduce lo studente ad un rapido ripasso degli argomenti dell'Analisi Matematica e dell'Algebra Lineare di uso frequente nel volume e ad una introduzione ai linguaggi MATLAB e Octave. Al fine di rendere maggiormente incisiva la presentazione e fornire un riscontro quantitativo immediato alla teoria vengono implementati in linguaggio MATLAB e Octave tutti gli algoritmi che via via si introducono. Vengono inoltre proposti numerosi esercizi, tutti risolti per esteso, ed esempi, anche con riferimento ad applicazioni in...

  20. AIR Tools - A MATLAB package of algebraic iterative reconstruction methods

    DEFF Research Database (Denmark)

    Hansen, Per Christian; Saxild-Hansen, Maria

    2012-01-01

    We present a MATLAB package with implementations of several algebraic iterative reconstruction methods for discretizations of inverse problems. These so-called row action methods rely on semi-convergence for achieving the necessary regularization of the problem. Two classes of methods are impleme......We present a MATLAB package with implementations of several algebraic iterative reconstruction methods for discretizations of inverse problems. These so-called row action methods rely on semi-convergence for achieving the necessary regularization of the problem. Two classes of methods...... are implemented: Algebraic Reconstruction Techniques (ART) and Simultaneous Iterative Reconstruction Techniques (SIRT). In addition we provide a few simplified test problems from medical and seismic tomography. For each iterative method, a number of strategies are available for choosing the relaxation parameter...

  1. Digital signal processing for wireless communication using Matlab

    CERN Document Server

    Gopi, E S

    2016-01-01

    This book examines signal processing techniques used in wireless communication illustrated by using the Matlab program. The author discusses these techniques as they relate to Doppler spread; delay spread; Rayleigh and Rician channel modeling; rake receiver; diversity techniques; MIMO and OFDM -based transmission techniques; and array signal processing. Related topics such as detection theory, link budget, multiple access techniques, and spread spectrum are also covered.   ·         Illustrates signal processing techniques involved in wireless communication using Matlab ·         Discusses multiple access techniques such as Frequency division multiple access, Time division multiple access, and Code division multiple access ·         Covers band pass modulation techniques such as Binary phase shift keying, Differential phase shift keying, Quadrature phase shift keying, Binary frequency shift keying, Minimum shift keying, and Gaussian minimum shift keying.

  2. A Matlab Tool for Tumor Localization in Parathyroid Sestamibi Scintigraphy

    Directory of Open Access Journals (Sweden)

    M. Đurović

    2015-11-01

    Full Text Available Submarine method for localization of parathyroid tumors (PT has proved to be effective in case of typical pitfalls of conventional scintigraphic methods (combined subtraction and double phase methods. It uses images obtained by standard dynamic parathyroid sestamibi scintigraphy suggested by European Association of Nuclear Medicine. This paper presents: 1 the developed Matlab interface that enables the implementation and evaluation of algorithms for the automatic application of Submarine method; 2 the algorithm for automatic extraction of the entire thyroid region from the background radioactivity using operations from mathematical morphology applied on dynamic scintigrams; 3 the results obtained by algorithm for localization and visualization of PTs based on estimation of exponential decreasing trend of time-activity curves. The algorithm was tested on a group of 20 patients with histopathologically proven PTs using developed Matlab interface.

  3. MATLAB/SIMULINK model of CANDU reactor for control studies

    International Nuclear Information System (INIS)

    Javidnia, H.; Jiang, J.

    2006-01-01

    In this paper a MATLAB/SIMULINK model is developed for a CANDU type reactor. The data for the reactor are taken from an Indian PHWR, which is very similar to CANDU in its design. Among the different feedback mechanisms in the core of the reactor, only xenon has been considered which plays an important role in spatial oscillations. The model is verified under closed loop scenarios with simple PI controller. The results of the simulation show that this model can be used for controller design and simulation of the reactor systems. Adding models of the other components of a CANDU reactor would ultimately result in a complete model of CANDU plant in MATLAB/SIMULINK. (author)

  4. Scientific computing an introduction using Maple and Matlab

    CERN Document Server

    Gander, Walter; Kwok, Felix

    2014-01-01

    Scientific computing is the study of how to use computers effectively to solve problems that arise from the mathematical modeling of phenomena in science and engineering. It is based on mathematics, numerical and symbolic/algebraic computations and visualization. This book serves as an introduction to both the theory and practice of scientific computing, with each chapter presenting the basic algorithms that serve as the workhorses of many scientific codes; we explain both the theory behind these algorithms and how they must be implemented in order to work reliably in finite-precision arithmetic. The book includes many programs written in Matlab and Maple – Maple is often used to derive numerical algorithms, whereas Matlab is used to implement them. The theory is developed in such a way that students can learn by themselves as they work through the text. Each chapter contains numerous examples and problems to help readers understand the material “hands-on”.

  5. Slow Orbit Feedback at the ALS Using Matlab

    International Nuclear Information System (INIS)

    Portmann, G.

    1999-01-01

    The third generation Advanced Light Source (ALS) produces extremely bright and finely focused photon beams using undulatory, wigglers, and bend magnets. In order to position the photon beams accurately, a slow global orbit feedback system has been developed. The dominant causes of orbit motion at the ALS are temperature variation and insertion device motion. This type of motion can be removed using slow global orbit feedback with a data rate of a few Hertz. The remaining orbit motion in the ALS is only 1-3 micron rms. Slow orbit feedback does not require high computational throughput. At the ALS, the global orbit feedback algorithm, based on the singular valued decomposition method, is coded in MATLAB and runs on a control room workstation. Using the MATLAB environment to develop, test, and run the storage ring control algorithms has proven to be a fast and efficient way to operate the ALS

  6. First experience with the MATLAB Middle Layer at ANKA

    International Nuclear Information System (INIS)

    Marsching, S.; Huttel, E.; Klein, M.; Mueller, A.S.; Smale, N.J.

    2012-01-01

    ANKA is a synchrotron radiation facility at the Karlsruhe Institute of Technology. The MATLAB Middle Layer (MML) is a collection of scripts for the MATLAB programming environment, designed to control and measure parameters of an accelerator. MML has been adapted for use at ANKA and the commissioning process was quite simple and would have been even simpler if we had used one of the control systems directly supported by MML. At ANKA MML is used for accelerator physics studies and regular tasks like beam-based alignment and response matrix analysis using LOCO. Furthermore, we intend to study the MML as default orbit correction tool for user operation. We report on the experience made during the commissioning process and present the latest results obtained while using the MML for machine studies. MML simplifies the task of performing a beam-based alignment dramatically compared to our old solution which required the user to copy the measured data into specific files for further evaluation

  7. MATLAB based beam orbit correction system of HLS storage ring

    International Nuclear Information System (INIS)

    Ding Shichuan; Liu Gongfa; Xuan Ke; Li Weimin; Wang Lin; Wang Jigang; Li Chuan; Bao Xun; Guo Weiqun

    2006-01-01

    The distortion of closed orbit usually causes much side effect which is harmful to synchrotron radiation source such as HLS, so it is necessary to correct the distortion of closed orbit. In this paper, the correction principle, development procedure and test of MATLAB based on beam orbit correction system of HLS storage ring are described. The correction system is consisted of the beam orbit measure system, corrector magnet system and the control system, and the beam orbit correction code based on MATLAB is working on the operation interface. The data of the beam orbit are analyzed and calculated firstly, and then the orbit is corrected by changing corrector strength via control system. The test shows that the distortion of closed orbit is from max 4.468 mm before correction to max 0.299 mm after correction as well as SDEV is from 2.986 mm to 0.087 mm. So the correction system reaches the design goal. (authors)

  8. Research Reactor Power Control System Design by MATLAB/SIMULINK

    International Nuclear Information System (INIS)

    Baang, Dane; Suh, Yong Suk; Kim, Young Ki; Im, Ki Hong

    2013-01-01

    In this study it is presented that MATLAB/SIMULINK can be efficiently used for modeling and power control system design for research reactors. The presented power control system deals with various functions including reactivity control, signals processing, reactivity calculation, alarm request generation, etc., thus it is required to test all the software logic using proper model for reactor, control rods, and field instruments. In MATLAB/SIMULINK tool, point kinetics, thermal model, control absorber rod model, and other instrument models were developed based on reactor parameters and known properties of each component or system. The software for power control system was invented and linked to the model to test each function. From the simulation result it is shown that the power control performance and other functions of the system can be easily tested and analyzed in the proposed simulation structure

  9. Processing of hyperspectral medical images applications in dermatology using Matlab

    CERN Document Server

    Koprowski, Robert

    2017-01-01

    This book presents new methods of analyzing and processing hyperspectral medical images, which can be used in diagnostics, for example for dermatological images. The algorithms proposed are fully automatic and the results obtained are fully reproducible. Their operation was tested on a set of several thousands of hyperspectral images and they were implemented in Matlab. The presented source code can be used without licensing restrictions. This is a valuable resource for computer scientists, bioengineers, doctoral students, and dermatologists interested in contemporary analysis methods.

  10. Online design of Matlab/Simulink block schemes

    Directory of Open Access Journals (Sweden)

    Zoltán Janík

    2011-04-01

    Full Text Available The paper presents a new online tool that enables to build a Matlab/Simulink block scheme in the Internet environment. The block scheme can be designed in similar manner as it is offered by local installation of Simulink. The application was created by widely used technologies as XHTML, CSS, JavaScript, PHP together with AJAX approach. The created application can be used as a supporting tool in virtual and remote laboratories.

  11. The Research of Histogram Enhancement Technique Based on Matlab Software

    Directory of Open Access Journals (Sweden)

    Li Kai

    2014-08-01

    Full Text Available Histogram enhancement technique has been widely applied as a typical pattern in digital image processing. The paper is based on Matlab software, through the two ways of histogram equalization and histogram specification technologies to deal with the darker images, using two methods of partial equilibrium and mapping histogram to transform the original histograms, thereby enhanced the image information. The results show that these two kinds of techniques both can significantly improve the image quality and enhance the image feature.

  12. AIR Tools - A MATLAB Package of Algebraic Iterative Reconstruction Techniques

    DEFF Research Database (Denmark)

    Hansen, Per Christian; Saxild-Hansen, Maria

    This collection of MATLAB software contains implementations of several Algebraic Iterative Reconstruction methods for discretizations of inverse problems. These so-called row action methods rely on semi-convergence for achieving the necessary regularization of the problem. Two classes of methods...... are implemented: Algebraic Reconstruction Techniques (ART) and Simultaneous Iterative Reconstruction Techniques (SIRT). In addition we provide a few simplified test problems from medical and seismic tomography. For each iterative method, a number of strategies are available for choosing the relaxation parameter...

  13. Applied Statistics Using SPSS, STATISTICA, MATLAB and R

    CERN Document Server

    De Sá, Joaquim P Marques

    2007-01-01

    This practical reference provides a comprehensive introduction and tutorial on the main statistical analysis topics, demonstrating their solution with the most common software package. Intended for anyone needing to apply statistical analysis to a large variety of science and enigineering problems, the book explains and shows how to use SPSS, MATLAB, STATISTICA and R for analysis such as data description, statistical inference, classification and regression, factor analysis, survival data and directional statistics. It concisely explains key concepts and methods, illustrated by practical examp

  14. Model of a photovoltaic panel emulator in MATLAB-Simulink

    OpenAIRE

    CAN, Hayrettin

    2014-01-01

    Being able to behave electrically similar to photovoltaic (PV) panels, PV emulator systems make it possible to perform different PV system tests under various operation conditions. In this paper, a model of a PV panel emulator is presented using the Power System Blockset under MATLAB-Simulink. The simulation of the emulator system is developed for testing a controller prior to a real-time implementation. The model can handle the dependence of all of the parameters in the model with ...

  15. Virtual experiment of optical spatial filtering in Matlab environment

    Science.gov (United States)

    Ji, Yunjing; Wang, Chunyong; Song, Yang; Lai, Jiancheng; Wang, Qinghua; Qi, Jing; Shen, Zhonghua

    2017-08-01

    The principle of spatial filtering experiment has been introduced, and the computer simulation platform with graphical user interface (GUI) has been made out in Matlab environment. Using it various filtering processes for different input image or different filtering purpose will be completed accurately, and filtering effect can be observed clearly with adjusting experimental parameters. The physical nature of the optical spatial filtering can be showed vividly, and so experimental teaching effect will be promoted.

  16. Matlab implementation of LASSO, LARS, the elastic net and SPCA

    DEFF Research Database (Denmark)

    2005-01-01

    There are a number of interesting variable selection methods available beside the regular forward selection and stepwise selection methods. Such approaches include LASSO (Least Absolute Shrinkage and Selection Operator), least angle regression (LARS) and elastic net (LARS-EN) regression. There al...... exists a method for calculating principal components with sparse loadings. This software package contains Matlab implementations of these functions. The standard implementations of these functions are available as add-on packages in S-Plus and R....

  17. Introduction to Artificial Vision through Laboratory Guides Using Matlab

    OpenAIRE

    Verónica Londoño-Osorio; Jhovana Marín-Pineda; Eliana I. Arango-Zuluaga

    2013-01-01

    This paper presents the design of two laboratory guides in artificial vision for a course which aims to introduce students to the different areas of specialization of his career. Therefore, the designed practices motivate and provide relevant content to the student, and to encourage research in the area of image processing. The first guide presents an introductory practice that explores the basic commands for image processing by programming a GUI in Matlab, and a second practice in which you ...

  18. Simulasi Teknik Modulasi Ofdm Qpsk Dengan Menggunakan Matlab

    OpenAIRE

    Subrata, Rosalia H; Gozali, Ferrianto

    2015-01-01

    This paper provides a brief explanation of the processing steps involved in Orthogonal Frequency Division Multiplexing (OFDM) with Quadrature Phase Shift Keying (QPSK) modulation technique implemented as a simulation program in MatLab. Input data of the simulation program in the form of random bit stream or text can be selected by users. The process conducted in the simulation is divided into three consecutive steps, processes in the OFDM transmitter, in transmission channel and in the OFDM r...

  19. Nonlinear distortion in wireless systems modeling and simulation with Matlab

    CERN Document Server

    Gharaibeh, Khaled M

    2011-01-01

    This book covers the principles of modeling and simulation of nonlinear distortion in wireless communication systems with MATLAB simulations and techniques In this book, the author describes the principles of modeling and simulation of nonlinear distortion in single and multichannel wireless communication systems using both deterministic and stochastic signals. Models and simulation methods of nonlinear amplifiers explain in detail how to analyze and evaluate the performance of data communication links under nonlinear amplification. The book addresses the analysis of nonlinear systems

  20. An IDL-based analysis package for COBE and other skycube-formatted astronomical data

    Science.gov (United States)

    Ewing, J. A.; Isaacman, Richard B.; Gales, J. M.

    1992-01-01

    UIMAGE is a data analysis package written in IDL for the Cosmic Background Explorer (COBE) project. COBE has extraordinarily stringent accuracy requirements: 1 percent mid-infrared absolute photometry, 0.01 percent submillimeter absolute spectrometry, and 0.0001 percent submillimeter relative photometry. Thus, many of the transformations and image enhancements common to analysis of large data sets must be done with special care. UIMAGE is unusual in this sense in that it performs as many of its operations as possible on the data in its native format and projection, which in the case of COBE is the quadrilateralized sphereical cube ('skycube'). That is, after reprojecting the data, e.g., onto an Aitoff map, the user who performs an operation such as taking a crosscut or extracting data from a pixel is transparently acting upon the skycube data from which the projection was made, thereby preserving the accuracy of the result. Current plans call for formatting external data bases such as CO maps into the skycube format with a high-accuracy transformation, thereby allowing Guest Investigators to use UIMAGE for direct comparison of the COBE maps with those at other wavelengths from other instruments. It is completely menu-driven so that its use requires no knowledge of IDL. Its functionality includes I/O from the COBE archives, FITS files, and IDL save sets as well as standard analysis operations such as smoothing, reprojection, zooming, statistics of areas, spectral analysis, etc. One of UIMAGE's more advanced and attractive features is its terminal independence. Most of the operations (e.g., menu-item selection or pixel selection) that are driven by the mouse on an X-windows terminal are also available using arrow keys and keyboard entry (e.g., pixel coordinates) on VT200 and Tektronix-class terminals. Even limited grey scales of images are available this way. Obviously, image processing is very limited on this type of terminal, but it is nonetheless surprising how

  1. Matlab enhanced multi-threaded tomography optimization sequence (MEMTOS)

    International Nuclear Information System (INIS)

    Lum, Edward S.; Pope, Chad L.

    2016-01-01

    Highlights: • Monte Carlo simulation of spent nuclear fuel assembly neutron computed tomography. • Optimized parallel calculations conducted from within the MATLAB environment. • Projection difference technique used to identify anomalies in spent nuclear fuel assemblies. - Abstract: One challenge associated with spent nuclear fuel assemblies is the lack of non-destructive analysis techniques to determine if fuel pins have been removed or replaced or if there are significant defects associated with fuel pins deep within a fuel assembly. Neutron computed tomography is a promising technique for addressing these qualitative issues. Monte Carlo simulation of spent nuclear fuel neutron computed tomography allows inexpensive process investigation and optimization. The main purpose of this work is to provide a fully automated advanced simulation framework for the analysis of spent nuclear fuel inspection using neutron computed tomography. The simulation framework, called Matlab Enhanced Multi-Threaded Tomography Optimization Sequence (MEMTOS) not only automates the simulation process, but also generates superior tomography image results. MEMTOS is written in the MATLAB scripting language and addresses file management, parallel Monte Carlo execution, results extraction, and tomography image generation. This paper describes the mathematical basis for neutron computed tomography, the Monte Carlo technique used to simulate neutron computed tomography, and the overall tomography simulation optimization algorithm. Sequence results presented include overall simulation speed enhancement, tomography and image results obtained for Experimental Breeder Reactor II spent fuel assemblies and light water reactor fuel assemblies. Optimization using a projection difference technique are also described.

  2. MATLAB as an incentive for student learning of skills

    Science.gov (United States)

    Bank, C. G.; Ghent, R. R.

    2016-12-01

    Our course "Computational Geology" takes a holistic approach to student learning by using MATLAB as a focal point to increase students' computing, quantitative reasoning, data analysis, report writing, and teamwork skills. The course, taught since 2007 with recent enrollments around 35 and aimed at 2nd to 3rd-year students, is required for the Geology and Earth and Environmental Systems major programs, and can be chosen as elective in our other programs, including Geophysics. The course is divided into five projects: Pacific plate velocity from the Hawaiian hotspot track, predicting CO2 concentration in the atmosphere, volume of Earth's oceans and sea-level rise, comparing wind directions for Vancouver and Squamish, and groundwater flow. Each project is based on real data, focusses on a mathematical concept (linear interpolation, gradients, descriptive statistics, differential equations) and highlights a programming task (arrays, functions, text file input/output, curve fitting). Working in teams of three, students need to develop a conceptional model to explain the data, and write MATLAB code to visualize the data and match it to their conceptional model. The programming is guided, and students work individually on different aspects (for example: reading the data, fitting a function, unit conversion) which they need to put together to solve the problem. They then synthesize their thought process in a paper. Anecdotal evidence shows that students continue using MATLAB in other courses.

  3. Design of high-performance parallelized gene predictors in MATLAB.

    Science.gov (United States)

    Rivard, Sylvain Robert; Mailloux, Jean-Gabriel; Beguenane, Rachid; Bui, Hung Tien

    2012-04-10

    This paper proposes a method of implementing parallel gene prediction algorithms in MATLAB. The proposed designs are based on either Goertzel's algorithm or on FFTs and have been implemented using varying amounts of parallelism on a central processing unit (CPU) and on a graphics processing unit (GPU). Results show that an implementation using a straightforward approach can require over 4.5 h to process 15 million base pairs (bps) whereas a properly designed one could perform the same task in less than five minutes. In the best case, a GPU implementation can yield these results in 57 s. The present work shows how parallelism can be used in MATLAB for gene prediction in very large DNA sequences to produce results that are over 270 times faster than a conventional approach. This is significant as MATLAB is typically overlooked due to its apparent slow processing time even though it offers a convenient environment for bioinformatics. From a practical standpoint, this work proposes two strategies for accelerating genome data processing which rely on different parallelization mechanisms. Using a CPU, the work shows that direct access to the MEX function increases execution speed and that the PARFOR construct should be used in order to take full advantage of the parallelizable Goertzel implementation. When the target is a GPU, the work shows that data needs to be segmented into manageable sizes within the GFOR construct before processing in order to minimize execution time.

  4. A Collection of Nonlinear Aircraft Simulations in MATLAB

    Science.gov (United States)

    Garza, Frederico R.; Morelli, Eugene A.

    2003-01-01

    Nonlinear six degree-of-freedom simulations for a variety of aircraft were created using MATLAB. Data for aircraft geometry, aerodynamic characteristics, mass / inertia properties, and engine characteristics were obtained from open literature publications documenting wind tunnel experiments and flight tests. Each nonlinear simulation was implemented within a common framework in MATLAB, and includes an interface with another commercially-available program to read pilot inputs and produce a three-dimensional (3-D) display of the simulated airplane motion. Aircraft simulations include the General Dynamics F-16 Fighting Falcon, Convair F-106B Delta Dart, Grumman F-14 Tomcat, McDonnell Douglas F-4 Phantom, NASA Langley Free-Flying Aircraft for Sub-scale Experimental Research (FASER), NASA HL-20 Lifting Body, NASA / DARPA X-31 Enhanced Fighter Maneuverability Demonstrator, and the Vought A-7 Corsair II. All nonlinear simulations and 3-D displays run in real time in response to pilot inputs, using contemporary desktop personal computer hardware. The simulations can also be run in batch mode. Each nonlinear simulation includes the full nonlinear dynamics of the bare airframe, with a scaled direct connection from pilot inputs to control surface deflections to provide adequate pilot control. Since all the nonlinear simulations are implemented entirely in MATLAB, user-defined control laws can be added in a straightforward fashion, and the simulations are portable across various computing platforms. Routines for trim, linearization, and numerical integration are included. The general nonlinear simulation framework and the specifics for each particular aircraft are documented.

  5. PFA toolbox: a MATLAB tool for Metabolic Flux Analysis.

    Science.gov (United States)

    Morales, Yeimy; Bosque, Gabriel; Vehí, Josep; Picó, Jesús; Llaneras, Francisco

    2016-07-11

    Metabolic Flux Analysis (MFA) is a methodology that has been successfully applied to estimate metabolic fluxes in living cells. However, traditional frameworks based on this approach have some limitations, particularly when measurements are scarce and imprecise. This is very common in industrial environments. The PFA Toolbox can be used to face those scenarios. Here we present the PFA (Possibilistic Flux Analysis) Toolbox for MATLAB, which simplifies the use of Interval and Possibilistic Metabolic Flux Analysis. The main features of the PFA Toolbox are the following: (a) It provides reliable MFA estimations in scenarios where only a few fluxes can be measured or those available are imprecise. (b) It provides tools to easily plot the results as interval estimates or flux distributions. (c) It is composed of simple functions that MATLAB users can apply in flexible ways. (d) It includes a Graphical User Interface (GUI), which provides a visual representation of the measurements and their uncertainty. (e) It can use stoichiometric models in COBRA format. In addition, the PFA Toolbox includes a User's Guide with a thorough description of its functions and several examples. The PFA Toolbox for MATLAB is a freely available Toolbox that is able to perform Interval and Possibilistic MFA estimations.

  6. DSISoft—a MATLAB VSP data processing package

    Science.gov (United States)

    Beaty, K. S.; Perron, G.; Kay, I.; Adam, E.

    2002-05-01

    DSISoft is a public domain vertical seismic profile processing software package developed at the Geological Survey of Canada. DSISoft runs under MATLAB version 5.0 and above and hence is portable between computer operating systems supported by MATLAB (i.e. Unix, Windows, Macintosh, Linux). The package includes processing modules for reading and writing various standard seismic data formats, performing data editing, sorting, filtering, and other basic processing modules. The processing sequence can be scripted allowing batch processing and easy documentation. A structured format has been developed to ensure future additions to the package are compatible with existing modules. Interactive modules have been created using MATLAB's graphical user interface builder for displaying seismic data, picking first break times, examining frequency spectra, doing f- k filtering, and plotting the trace header information. DSISoft modular design facilitates the incorporation of new processing algorithms as they are developed. This paper gives an overview of the scope of the software and serves as a guide for the addition of new modules.

  7. A Compilation of MATLAB Scripts and Functions for MACGMC Analyses

    Science.gov (United States)

    Murthy, Pappu L. N.; Bednarcyk, Brett A.; Mital, Subodh K.

    2017-01-01

    The primary aim of the current effort is to provide scripts that automate many of the repetitive pre- and post-processing tasks associated with composite materials analyses using the Micromechanics Analysis Code with the Generalized Method of Cells. This document consists of a compilation of hundreds of scripts that were developed in MATLAB (The Mathworks, Inc., Natick, MA) programming language and consolidated into 16 MATLAB functions. (MACGMC). MACGMC is a composite material and laminate analysis software code developed at NASA Glenn Research Center. The software package has been built around the generalized method of cells (GMC) family of micromechanics theories. The computer code is developed with a user-friendly framework, along with a library of local inelastic, damage, and failure models. Further, application of simulated thermo-mechanical loading, generation of output results, and selection of architectures to represent the composite material have been automated to increase the user friendliness, as well as to make it more robust in terms of input preparation and code execution. Finally, classical lamination theory has been implemented within the software, wherein GMC is used to model the composite material response of each ply. Thus, the full range of GMC composite material capabilities is available for analysis of arbitrary laminate configurations as well. The pre-processing tasks include generation of a multitude of different repeating unit cells (RUCs) for CMCs and PMCs, visualization of RUCs from MACGMC input and output files and generation of the RUC section of a MACGMC input file. The post-processing tasks include visualization of the predicted composite response, such as local stress and strain contours, damage initiation and progression, stress-strain behavior, and fatigue response. In addition to the above, several miscellaneous scripts have been developed that can be used to perform repeated Monte-Carlo simulations to enable probabilistic

  8. Elaboration d’Indice composite de Développement du secteur bovin Laitier (IDL

    Directory of Open Access Journals (Sweden)

    K. KESSAB BELKHAYAT

    2014-03-01

    Full Text Available Plusieurs travaux de recherche ont été publiés sur la mesure du niveau de développement du secteur bovin laitier. Toutefois, aucun de ces travaux ne traite du secteur dans sa globalité. L’objectif du travail est de construire un tableau de bord du secteur bovin laitier à travers le développement d’un indice composite.Pour la construction de l’indice composite, 39 indicateurs du secteur bovin laitier sont identifiés dans le cadre conceptuel couvrant 8 dimensions. La collecte des données a concerné 41 variables composant les indicateurs, 37 pays et sur une période de 11 années (2000-2010. Après le traitement des données manquantes, la base de données complète est constituée de 21 indicateurs, de 23 pays sur 9 années. Un modèle a été développé pour la normalisation, la pondération des indicateurs puis pour le calcul de l’indice composite. Le test de robustesse est déroulé par le calcul du coefficient de corrélation de Pearson. Ce test a montré que de l’indice composite calculé selon 3 méthodes différentes de normalisation et de pondération est robuste. Les pays ont été classés selon leur l’IDL. Plusieurs axes d’analyse sont possibles à travers l’IDL notamment son évolution dans le temps, les points forts et les points faibles pour chaque pays et les leviers de développement du secteur.

  9. Building a Snow Data Management System using Open Source Software (and IDL)

    Science.gov (United States)

    Goodale, C. E.; Mattmann, C. A.; Ramirez, P.; Hart, A. F.; Painter, T.; Zimdars, P. A.; Bryant, A.; Brodzik, M.; Skiles, M.; Seidel, F. C.; Rittger, K. E.

    2012-12-01

    At NASA's Jet Propulsion Laboratory free and open source software is used everyday to support a wide range of projects, from planetary to climate to research and development. In this abstract I will discuss the key role that open source software has played in building a robust science data processing pipeline for snow hydrology research, and how the system is also able to leverage programs written in IDL, making JPL's Snow Data System a hybrid of open source and proprietary software. Main Points: - The Design of the Snow Data System (illustrate how the collection of sub-systems are combined to create a complete data processing pipeline) - Discuss the Challenges of moving from a single algorithm on a laptop, to running 100's of parallel algorithms on a cluster of servers (lesson's learned) - Code changes - Software license related challenges - Storage Requirements - System Evolution (from data archiving, to data processing, to data on a map, to near-real-time products and maps) - Road map for the next 6 months (including how easily we re-used the snowDS code base to support the Airborne Snow Observatory Mission) Software in Use and their Software Licenses: IDL - Used for pre and post processing of data. Licensed under a proprietary software license held by Excelis. Apache OODT - Used for data management and workflow processing. Licensed under the Apache License Version 2. GDAL - Geospatial Data processing library used for data re-projection currently. Licensed under the X/MIT license. GeoServer - WMS Server. Licensed under the General Public License Version 2.0 Leaflet.js - Javascript web mapping library. Licensed under the Berkeley Software Distribution License. Python - Glue code and miscellaneous data processing support. Licensed under the Python Software Foundation License. Perl - Script wrapper for running the SCAG algorithm. Licensed under the General Public License Version 3. PHP - Front-end web application programming. Licensed under the PHP License Version

  10. 78 FR 11751 - Approval and Promulgation of Implementation Plans; State of Kansas; Idle Reduction of Heavy-Duty...

    Science.gov (United States)

    2013-02-20

    ...; mechanical work; armored vehicles; bus idling for passenger comfort (no greater than fifteen minutes in any...).) List of Subjects in 40 CFR Part 52 Environmental protection, Air pollution control, Carbon monoxide, Incorporation by reference, Intergovernmental relations, Motor carriers, Motor vehicles, Motor vehicle pollution...

  11. Can the identification of an idle line facilitate its removal? A comparison between a proposed guideline and clinical practice.

    Science.gov (United States)

    Kara, Areeba; Johnson, Cynthia S; Murray, Michelle; Dillon, Jill; Hui, Siu L

    2016-07-01

    There are 250,000 cases of central line-associated blood stream infections in the United States annually, some of which may be prevented by the removal of lines that are no longer needed. To test the performance of criteria to identify an idle line as a guideline to facilitate its removal. Patients with central lines on the wards were identified. Criteria for justified use were defined. If none were met, the line was considered "idle." We proposed the guideline that a line may be removed the day following the first idle day and compared actual practice with our proposed guideline. One hundred twenty-six lines in 126 patients were observed. Eighty-three (65.9%) were peripherally inserted central catheters. Twenty-seven percent (n= 34) were placed for antibiotics. Seventy-six patients had lines removed prior to discharge. In these patients, the line was in place for 522 days, of which 32.7% were idle. The most common reasons to justify the line included parenteral antibiotics and meeting systemic inflammatory response (SIRS) criteria. In 11 (14.5%) patients, the line was removed prior to the proposed guideline. Most (n = 36, 47.4%) line removals were observed to be in accordance with our guideline. In another 29 (38.2%), line removal was delayed compared to our guideline. Idle days are common. Central line days may be reduced by the consistent daily reevaluation of a line's justification using defined criteria. The practice of routine central line placement for prolonged antibiotics and the inclusion of SIRS criteria to justify the line may need to be reevaluated. Journal of Hospital Medicine 2016;11:489-493. © 2016 Society of Hospital Medicine. © 2016 Society of Hospital Medicine.

  12. SIGNUM: A Matlab, TIN-based landscape evolution model

    Science.gov (United States)

    Refice, A.; Giachetta, E.; Capolongo, D.

    2012-08-01

    Several numerical landscape evolution models (LEMs) have been developed to date, and many are available as open source codes. Most are written in efficient programming languages such as Fortran or C, but often require additional code efforts to plug in to more user-friendly data analysis and/or visualization tools to ease interpretation and scientific insight. In this paper, we present an effort to port a common core of accepted physical principles governing landscape evolution directly into a high-level language and data analysis environment such as Matlab. SIGNUM (acronym for Simple Integrated Geomorphological Numerical Model) is an independent and self-contained Matlab, TIN-based landscape evolution model, built to simulate topography development at various space and time scales. SIGNUM is presently capable of simulating hillslope processes such as linear and nonlinear diffusion, fluvial incision into bedrock, spatially varying surface uplift which can be used to simulate changes in base level, thrust and faulting, as well as effects of climate changes. Although based on accepted and well-known processes and algorithms in its present version, it is built with a modular structure, which allows to easily modify and upgrade the simulated physical processes to suite virtually any user needs. The code is conceived as an open-source project, and is thus an ideal tool for both research and didactic purposes, thanks to the high-level nature of the Matlab environment and its popularity among the scientific community. In this paper the simulation code is presented together with some simple examples of surface evolution, and guidelines for development of new modules and algorithms are proposed.

  13. Curtain Antenna Array Simulation Research Based on MATLAB

    Directory of Open Access Journals (Sweden)

    Hongbo LIU

    2014-01-01

    Full Text Available For the radiating capacity of curtain antenna array, this paper constructs a three- line-four-column curtain antenna array using cage antenna as the antenna array element and obtains a normalizing 3D radiation patterns through conducting simulation with MATLAB. Meanwhile, the relationships between the antenna spacing and the largest directivity coefficient, as well as the communication frequency and largest directivity coefficient are analyzed in this paper. It turns out that the max value will generate when the antenna spacing is around 18 m and the best communication effect will be achieved when the communication frequency is about 12.4 MHz.

  14. PEM fuel cell modeling and simulation using Matlab

    CERN Document Server

    Spiegel, Colleen

    2011-01-01

    Although, the basic concept of a fuel cell is quite simple, creating new designs and optimizing their performance takes serious work and a mastery of several technical areas. PEM Fuel Cell Modeling and Simulation Using Matlab, provides design engineers and researchers with a valuable tool for understanding and overcoming barriers to designing and building the next generation of PEM Fuel Cells. With this book, engineers can test components and verify designs in the development phase, saving both time and money.Easy to read and understand, this book provides design and modelling tips for

  15. Obtención de curvas de residuo con Matlab

    OpenAIRE

    Barrio García-Parra, Marco Bruno del

    2017-01-01

    Los diagramas de curvas de residuo son una herramienta cualitativa que permite una mejor comprensión de los procesos físicos que se dan en la destilación de sistemas multicomponente. Una curva de residuo representa la evolución de la composición de una mezcla líquida según se va evaporando y retirando el vapor producido resultante de la ebullición. En este trabajo se expone la metodología, resultados y conclusiones que han llevado a la obtención de curvas de residuo con Matlab® en sistema...

  16. ADAMS-MATLAB Co-Simulation of A Serial Manipulator

    Directory of Open Access Journals (Sweden)

    Parthasarathy Tejaswin

    2017-01-01

    Full Text Available This paper presents the dynamic modelling and simulation of a now redundant robot, Mitsubishi RM-501, and proposes a general algorithm for experimental simulation in kinematics, dynamics and control analysis to any such robot. Through reverse engineering, a model as accurate as the real robot was developed in SolidWorks.The simulations of the same were performed in ADAMS (dynamicmodeling software offered by MSC Software Corpalong with MATLAB for motion studies and control dynamics. Finally, with a user-input path the accuracy and precision of the simulator was verified.

  17. Development of Integral Environment in Matlab/Simulink for FPGA

    Directory of Open Access Journals (Sweden)

    Dejan Jokic

    2014-01-01

    Full Text Available In this paper is presented realization of integral environment which consists of software and hardware components for the purpose of programming Altera DE boards. Software component is Toolbox FPGA Real Time which enables simple use of Matlab/Simulink with DSP Builder for the purpose of realization of control structures. Hardware component are Interface cards that make connection of DE board with object of control possible. Simulation and experimental results of DC motor control indicate the usefulness of the proposed concept.

  18. Discrete random signal processing and filtering primer with Matlab

    CERN Document Server

    Poularikas, Alexander D

    2013-01-01

    Engineers in all fields will appreciate a practical guide that combines several new effective MATLAB® problem-solving approaches and the very latest in discrete random signal processing and filtering.Numerous Useful Examples, Problems, and Solutions - An Extensive and Powerful ReviewWritten for practicing engineers seeking to strengthen their practical grasp of random signal processing, Discrete Random Signal Processing and Filtering Primer with MATLAB provides the opportunity to doubly enhance their skills. The author, a leading expert in the field of electrical and computer engineering, offe

  19. Image processing tensor transform and discrete tomography with Matlab

    CERN Document Server

    Grigoryan, Artyom M

    2012-01-01

    Focusing on mathematical methods in computer tomography, Image Processing: Tensor Transform and Discrete Tomography with MATLAB(R) introduces novel approaches to help in solving the problem of image reconstruction on the Cartesian lattice. Specifically, it discusses methods of image processing along parallel rays to more quickly and accurately reconstruct images from a finite number of projections, thereby avoiding overradiation of the body during a computed tomography (CT) scan. The book presents several new ideas, concepts, and methods, many of which have not been published elsewhere. New co

  20. Differential equations with Matlab exploration, applications, and theory

    CERN Document Server

    McKibben, Mark

    2014-01-01

    ORDINARY DIFFERENTIAL EQUATIONS Welcome! Introduction This Book Is a Field Guide. What Does That Mean for YOU? Mired in Jargon - A Quick Language Lesson! Introducing MATLAB A First Look at Some Elementary Mathematical Models A Basic Analysis Toolbox Some Basic Mathematical Shorthand Set Algebra Functions The Space (R; j_j) A Closer Look at Sequences in (R; j_j) The Spaces (RN; k_kRN ) and (MN(R); k_kMN(R)Calculus of RN-valued and MN(R)-valued FunctionsSome Elementary ODEs Looking Ahead A First Wave of Mathematical Models Newton's Law of Heating and Cooling-Revisited Pharmocokinetics Uniform Mi

  1. Causes of maternal mortality decline in Matlab, Bangladesh.

    Science.gov (United States)

    Chowdhury, Mahbub Elahi; Ahmed, Anisuddin; Kalim, Nahid; Koblinsky, Marge

    2009-04-01

    Bangladesh is distinct among developing countries in achieving a low maternal mortality ratio (MMR) of 322 per 100,000 livebirths despite the very low use of skilled care at delivery (13% nationally). This variation has also been observed in Matlab, a rural area in Bangladesh, where longitudinal data on maternal mortality are available since the mid-1970s. The current study investigated the possible causes of the maternal mortality decline in Matlab. The study analyzed 769 maternal deaths and 215,779 pregnancy records from the Health and Demographic Surveillance System (HDSS) and other sources of safe motherhood data in the ICDDR,B and government service areas in Matlab during 1976-2005. The major interventions that took place in both the areas since the early 1980s were the family-planning programme plus safe menstrual regulation services and safe motherhood interventions (midwives for normal delivery in the ICDDR,B service area from the late 1980s and equal access to comprehensive emergency obstetric care [EmOC] in public facilities for women from both the areas). National programmes for social development and empowerment of women through education and microcredit programmes were implemented in both the areas. The quantitative findings were supplemented by a qualitative study by interviewing local community care providers for their change in practices for maternal healthcare over time. After the introduction of the safe motherhood programme, reduction in maternal mortality was higher in the ICDDR,B service area (68.6%) than in the government service area (50.4%) during 1986-1989 and 2001-2005. Reduction in the number of maternal deaths due to the fertility decline was higher in the government service area (30%) than in the ICDDR,B service area (23%) during 1979-2005. In each area, there has been substantial reduction in abortion-related mortality--86.7% and 78.3%--in the ICDDR,B and government service areas respectively. Education of women was a strong predictor

  2. SBEToolbox: A Matlab Toolbox for Biological Network Analysis.

    Science.gov (United States)

    Konganti, Kranti; Wang, Gang; Yang, Ence; Cai, James J

    2013-01-01

    We present SBEToolbox (Systems Biology and Evolution Toolbox), an open-source Matlab toolbox for biological network analysis. It takes a network file as input, calculates a variety of centralities and topological metrics, clusters nodes into modules, and displays the network using different graph layout algorithms. Straightforward implementation and the inclusion of high-level functions allow the functionality to be easily extended or tailored through developing custom plugins. SBEGUI, a menu-driven graphical user interface (GUI) of SBEToolbox, enables easy access to various network and graph algorithms for programmers and non-programmers alike. All source code and sample data are freely available at https://github.com/biocoder/SBEToolbox/releases.

  3. Automatic analysis of intrinsic positional verification films brachytherapy using MATLAB

    International Nuclear Information System (INIS)

    Quiros Higueras, J. D.; Marco Blancas, N. de; Ruiz Rodriguez, J. C.

    2011-01-01

    One of the essential tests in quality control of brachytherapy equipment is verification auto load intrinsic positional radioactive source. A classic method for evaluation is the use of x-ray film and measuring the distance between the marks left by autoradiography of the source with respect to a reference. In our center has developed an automated method of measurement by the radiochromic film scanning and implementation of a macro developed in Matlab, in order to optimize time and reduce uncertainty in the measurement. The purpose of this paper is to describe the method developed, assess their uncertainty and quantify their advantages over the manual method. (Author)

  4. Efficient topology optimization in MATLAB using 88 lines of code

    DEFF Research Database (Denmark)

    Andreassen, Erik; Clausen, Anders; Schevenels, Mattias

    2011-01-01

    The paper presents an efficient 88 line MATLAB code for topology optimization. It has been developed using the 99 line code presented by Sigmund (Struct Multidisc Optim 21(2):120–127, 2001) as a starting point. The original code has been extended by a density filter, and a considerable improvemen...... of the basic code to include recent PDE-based and black-and-white projection filtering methods. The complete 88 line code is included as an appendix and can be downloaded from the web site www.topopt.dtu.dk....

  5. GUIDING NONLINEAR FORCE-FREE MODELING USING CORONAL OBSERVATIONS: FIRST RESULTS USING A QUASI-GRAD-RUBIN SCHEME

    Energy Technology Data Exchange (ETDEWEB)

    Malanushenko, A. [Department of Physics, Montana State University, Bozeman, MT (United States); Schrijver, C. J.; DeRosa, M. L. [Lockheed Martin Advanced Technology Center, Palo Alto, CA (United States); Wheatland, M. S.; Gilchrist, S. A. [Sydney Institute for Astronomy, School of Physics, University of Sydney (Australia)

    2012-09-10

    At present, many models of the coronal magnetic field rely on photospheric vector magnetograms, but these data have been shown to be problematic as the sole boundary information for nonlinear force-free field extrapolations. Magnetic fields in the corona manifest themselves in high-energy images (X-rays and EUV) in the shapes of coronal loops, providing an additional constraint that is not at present used as constraints in the computational domain, directly influencing the evolution of the model. This is in part due to the mathematical complications of incorporating such input into numerical models. Projection effects, confusion due to overlapping loops (the coronal plasma is optically thin), and the limited number of usable loops further complicate the use of information from coronal images. We develop and test a new algorithm to use images of coronal loops in the modeling of the solar coronal magnetic field. We first fit projected field lines with those of constant-{alpha} force-free fields to approximate the three-dimensional distribution of currents in the corona along a sparse set of trajectories. We then apply a Grad-Rubin-like iterative technique, which uses these trajectories as volume constraints on the values of {alpha}, to obtain a volume-filling nonlinear force-free model of the magnetic field, modifying a code and method presented by Wheatland. We thoroughly test the technique on known analytical and solar-like model magnetic fields previously used for comparing different extrapolation techniques and compare the results with those obtained by currently available methods relying only on the photospheric data. We conclude that we have developed a functioning method of modeling the coronal magnetic field by combining the line-of-sight component of the photospheric magnetic field with information from coronal images. Whereas we focus on the use of coronal loop information in combination with line-of-sight magnetograms, the method is readily extended to

  6. GUIDING NONLINEAR FORCE-FREE MODELING USING CORONAL OBSERVATIONS: FIRST RESULTS USING A QUASI-GRAD-RUBIN SCHEME

    International Nuclear Information System (INIS)

    Malanushenko, A.; Schrijver, C. J.; DeRosa, M. L.; Wheatland, M. S.; Gilchrist, S. A.

    2012-01-01

    At present, many models of the coronal magnetic field rely on photospheric vector magnetograms, but these data have been shown to be problematic as the sole boundary information for nonlinear force-free field extrapolations. Magnetic fields in the corona manifest themselves in high-energy images (X-rays and EUV) in the shapes of coronal loops, providing an additional constraint that is not at present used as constraints in the computational domain, directly influencing the evolution of the model. This is in part due to the mathematical complications of incorporating such input into numerical models. Projection effects, confusion due to overlapping loops (the coronal plasma is optically thin), and the limited number of usable loops further complicate the use of information from coronal images. We develop and test a new algorithm to use images of coronal loops in the modeling of the solar coronal magnetic field. We first fit projected field lines with those of constant-α force-free fields to approximate the three-dimensional distribution of currents in the corona along a sparse set of trajectories. We then apply a Grad-Rubin-like iterative technique, which uses these trajectories as volume constraints on the values of α, to obtain a volume-filling nonlinear force-free model of the magnetic field, modifying a code and method presented by Wheatland. We thoroughly test the technique on known analytical and solar-like model magnetic fields previously used for comparing different extrapolation techniques and compare the results with those obtained by currently available methods relying only on the photospheric data. We conclude that we have developed a functioning method of modeling the coronal magnetic field by combining the line-of-sight component of the photospheric magnetic field with information from coronal images. Whereas we focus on the use of coronal loop information in combination with line-of-sight magnetograms, the method is readily extended to incorporate

  7. Idling Reduction for Long-Haul Trucks: An Economic Comparison of On-Board and Wayside Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Gaines, Linda [Argonne National Lab. (ANL), Argonne, IL (United States); Weikersheimer, Patricia [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-09-01

    Reducing the idling of long-haul heavy-duty trucks has long been recognized as a particularly low-hanging fruit of fuel efficiency and emissions reduction. The displacement of about 10 hours of diesel idling every day, for most days of the year, for as many as a million long-haul trucks has very clear benefits. This report considers the costs and return on investment (ROI) for idling reduction (IR) equipment for both truck owners and electrified parking space (EPS) equipment owners. For the truck owners, the key variables examined are idling hours to be displaced (generally 1,000 to 2,000 hours per year) and the price of fuel ($0 to $5/gal). The ideal IR option would provide complete services in varied climates in any location and offer the best ROI on trucks that log many idling hours. For trucks that have fewer idling hours, options with a fixed cost per hour (i.e., EPS) might be most attractive if they were available to all, or even most, truck drivers. EPS, however, is particularly cost effective for trucks on prescribed routes with a need for regular, extended stops at terminals. (EPS is also called truck stop electrification, or TSE.) The analysis shows that all IR options save money when fuel costs more than $2/gal. For trucks requiring bunk heat, a simple heater (plug-in or diesel) is almost always the most costeffective way to provide heat, even if the truck is equipped with an auxiliary power unit (APU) or is parked at a single-system EPS location. For trucks requiring bunk air-conditioning, the use of single-system EPS is most cost effective for those logging fewer idling hours. Even for trucks with higher idling hours, the cost of EPS may be about the same as that for on-board air-conditioning. Clearly, trucks’ locations and seasonal factors—and the availability of EPS— are significant in the choice of “best fit” IR equipment for truck owners. This report also considers costs and payback for owners of EPS infrastructure. An industry that 5

  8. Digital Signal Processing for Medical Imaging Using Matlab

    CERN Document Server

    Gopi, E S

    2013-01-01

    This book describes medical imaging systems, such as X-ray, Computed tomography, MRI, etc. from the point of view of digital signal processing. Readers will see techniques applied to medical imaging such as Radon transformation, image reconstruction, image rendering, image enhancement and restoration, and more. This book also outlines the physics behind medical imaging required to understand the techniques being described. The presentation is designed to be accessible to beginners who are doing research in DSP for medical imaging. Matlab programs and illustrations are used wherever possible to reinforce the concepts being discussed.  ·         Acts as a “starter kit” for beginners doing research in DSP for medical imaging; ·         Uses Matlab programs and illustrations throughout to make content accessible, particularly with techniques such as Radon transformation and image rendering; ·         Includes discussion of the basic principles behind the various medical imaging tec...

  9. KiT: a MATLAB package for kinetochore tracking.

    Science.gov (United States)

    Armond, Jonathan W; Vladimirou, Elina; McAinsh, Andrew D; Burroughs, Nigel J

    2016-06-15

    During mitosis, chromosomes are attached to the mitotic spindle via large protein complexes called kinetochores. The motion of kinetochores throughout mitosis is intricate and automated quantitative tracking of their motion has already revealed many surprising facets of their behaviour. Here, we present 'KiT' (Kinetochore Tracking)-an easy-to-use, open-source software package for tracking kinetochores from live-cell fluorescent movies. KiT supports 2D, 3D and multi-colour movies, quantification of fluorescence, integrated deconvolution, parallel execution and multiple algorithms for particle localization. KiT is free, open-source software implemented in MATLAB and runs on all MATLAB supported platforms. KiT can be downloaded as a package from http://www.mechanochemistry.org/mcainsh/software.php The source repository is available at https://bitbucket.org/jarmond/kit and under continuing development. Supplementary data are available at Bioinformatics online. jonathan.armond@warwick.ac.uk. © The Author 2016. Published by Oxford University Press.

  10. Solution of the reactor point kinetics equations by MATLAB computing

    Directory of Open Access Journals (Sweden)

    Singh Sudhansu S.

    2015-01-01

    Full Text Available The numerical solution of the point kinetics equations in the presence of Newtonian temperature feedback has been a challenging issue for analyzing the reactor transients. Reactor point kinetics equations are a system of stiff ordinary differential equations which need special numerical treatments. Although a plethora of numerical intricacies have been introduced to solve the point kinetics equations over the years, some of the simple and straightforward methods still work very efficiently with extraordinary accuracy. As an example, it has been shown recently that the fundamental backward Euler finite difference algorithm with its simplicity has proven to be one of the most effective legacy methods. Complementing the back-ward Euler finite difference scheme, the present work demonstrates the application of ordinary differential equation suite available in the MATLAB software package to solve the stiff reactor point kinetics equations with Newtonian temperature feedback effects very effectively by analyzing various classic benchmark cases. Fair accuracy of the results implies the efficient application of MATLAB ordinary differential equation suite for solving the reactor point kinetics equations as an alternate method for future applications.

  11. Improving Energy Efficiency in Idle Listening of IEEE 802.11 WLANs

    Directory of Open Access Journals (Sweden)

    Muhammad Adnan

    2016-01-01

    Full Text Available This paper aims to improve energy efficiency of IEEE 802.11 wireless local area networks (WLANs by effectively dealing with idle listening (IL, which is required for channel sensing and is unavoidable in a contention-based channel access mechanism. Firstly, we show that IL is a dominant source of energy drain in WLANs and it cannot be effectively alleviated by the power saving mechanism proposed in the IEEE 802.11 standard. To solve this problem, we propose an energy-efficient mechanism that combines three schemes in a systematic way: downclocking, frame aggregation, and contention window adjustment. The downclocking scheme lets a station remain in a semisleep state when overhearing frames destined to neighbor stations, whereby the station consumes the minimal energy without impairing channel access capability. As well as decreasing the channel access overhead, the frame aggregation scheme prolongs the period of semisleep time. Moreover, by controlling the size of contention window based on the number of stations, the proposed mechanism decreases unnecessary IL time due to collision and retransmission. By deriving an analysis model and performing extensive simulations, we confirm that the proposed mechanism significantly improves the energy efficiency and throughput, by up to 2.8 and 1.8 times, respectively, compared to the conventional power saving mechanisms.

  12. Edge detection using IDL for mammographic image in Medical Physics laboratory

    International Nuclear Information System (INIS)

    Wan Hazlinda Ismail; Md Saion Salikin; Asmaliza Hashim; Norriza Mohd Isa; Azuhar Ripin

    2004-01-01

    Over the decade, doctors, physicists and scientists have been using radiographic images to diagnosis patient illness as well as to study the anatomy of human body without having to cut them. Now days, in the advancement of technologies these images are available in digital form. The image data can be manipulated to determine exactly the information doctors, physicists and scientists want, which can help them in decision making when diagnosis as well as help them in understanding of the human body better. In this paper, the edge detection technique is discussed in brief which is extensive used in image y segmentation where the method is performed by finding the boundaries between objects, thus indirectly defining the object. Bennet Model DMF- 150 Mammography Machine and breast phantom model l2A with 4. 0 cm compressed thickness are employed in this study. A Vidar film digitizer is used to digitize the images. The digitized images are then manipulated by using Interactive Data language (IDL) software. Results of this study are presented in brief in this presentation. (Author)

  13. Statistical Evaluation of the Identified Structural Parameters of an idling Offshore Wind Turbine

    International Nuclear Information System (INIS)

    Kramers, Hendrik C.; Van der Valk, Paul L.C.; Van Wingerden, Jan-Willem

    2016-01-01

    With the increased need for renewable energy, new offshore wind farms are being developed at an unprecedented scale. However, as the costs of offshore wind energy are still too high, design optimization and new innovations are required for lowering its cost. The design of modern day offshore wind turbines relies on numerical models for estimating ultimate and fatigue loads of the turbines. The dynamic behavior and the resulting structural loading of the turbines is determined for a large part by its structural properties, such as the natural frequencies and damping ratios. Hence, it is important to obtain accurate estimates of these modal properties. For this purpose stochastic subspace identification (SSI), in combination with clustering and statistical evaluation methods, is used to obtain the variance of the identified modal properties of an installed 3.6MW offshore wind turbine in idling conditions. It is found that one is able to obtain confidence intervals for the means of eigenfrequencies and damping ratios of the fore-aft and side-side modes of the wind turbine. (paper)

  14. Development of MATLAB Scripts for the Calculation of Thermal Manikin Regional Resistance Values

    Science.gov (United States)

    2016-01-01

    TECHNICAL NOTE NO. TN16-1 DATE January 2016 ADA DEVELOPMENT OF MATLAB ® SCRIPTS FOR THE...USARIEM TECHNICAL NOTE TN16-1 DEVELOPMENT OF MATLAB ® SCRIPTS FOR THE CALCULATION OF THERMAL MANIKIN REGIONAL RESISTANCE VALUES...EXECUTIVE SUMMARY A software tool has been developed via MATLAB ® scripts to reduce the amount of repetitive and time-consuming calculations that are

  15. Higher capacity, lower carbon dioxide emissions. Idle power compensation in HV lines; Mehr Kapazitaet, weniger Kohlendioxid. Blindleistungskompensation bei Hochspannungsleitungen

    Energy Technology Data Exchange (ETDEWEB)

    Auer, Jan-Hendrik von [Alstom Grid GmbH, Berlin (Germany). Team Leistungselektronik und Kompensationsanlagen

    2012-07-01

    Even today, many HP lines have reached their limits. It is therefore highly urgent to find measures for optimum utilization of the available overhead transmssion capacities, e.g. by idle power compensation. Together with a filter for harmonics reduction, this will ensure higher grid stability and enhance transport capacities while reducing transport losses, thus saving money and reducing CO{sub 2} emissions. (orig./AKB)

  16. Studi Implementasi Lean Six Sigma dengan Pendekatan Value Stream Mapping untuk Mereduksi Idle Time Material pada Gudang Pelat dan Profil

    Directory of Open Access Journals (Sweden)

    Wawan Widiatmoko

    2013-03-01

    Full Text Available Peningkatan volume kegiatan industri maritim di Indonesia menuntut industri perkapalan di daerah Surabaya untuk lebih meningkatkan pelayanan baik berupa bangunan baru maupun reparasi kapal. Berdasarkan hal tersebut galangan harus mampu mengelola proses produksi dengan baik sehingga menghasilkan keuntungan yang maksimum. Salah satunya adalah proses inventory dan transport of materials yang efektif. Tugas akhir bertujuan untuk mengetahui sistem inventori yang diterapkan oleh perusahaan yang dijadikan sampel serta idle time material pelat dan profil yang ada di gudang bahan baku dengan menggunakan metode lean six sigma dengan pendekatan value stream mapping. Dari hasil perhitungan menggunakan diperoleh nilai sigma perhitungan idle time sebesar 0.1976 sehingga perlu dilakukan upaya peningkatan nilai sigma pengadaan material itu sendiri. Berdasarkan hasil analisa penyebab adanya idle time dengan menggunakan RCA diperoleh beberapa faktor yaitu : rendahnya nilai sigma penggunaan material, tidak tercapainya target pengerjaan pada proses fabrikasi, proses pengadaan material yang tidak mempertimbangkan strategi proses pembangunan kapal. Dengan penerapan lean six sigma dengan pendekatan value stream mapping dihasilkan usulan perbaikan proses inventori di perusahaan antara lain : meningkatkan nilai sigma penggunaan material, melakukan strategi pembelian material sesuai strategi pembangunan kapal berdasarkan zona, memperbaiki kerjasama dengan supplier material pelat dan profil. Pembuatan future state mapping mendapatkan usulan perbaikan dengan pembuatan perencanaan pengadaan material dengan mempertimbangkan strategi pembangunan kapal berdasarkan zona pembangunannya. Diperoleh strategi pengadaan material yang dilakukan sebanyak 4 kali order.

  17. Numerical linear algebra a concise introduction with Matlab and Julia

    CERN Document Server

    Bornemann, Folkmar

    2018-01-01

    This book offers an introduction to the algorithmic-numerical thinking using basic problems of linear algebra. By focusing on linear algebra, it ensures a stronger thematic coherence than is otherwise found in introductory lectures on numerics. The book highlights the usefulness of matrix partitioning compared to a component view, leading not only to a clearer notation and shorter algorithms, but also to significant runtime gains in modern computer architectures. The algorithms and accompanying numerical examples are given in the programming environment MATLAB, and additionally – in an appendix – in the future-oriented, freely accessible programming language Julia. This book is suitable for a two-hour lecture on numerical linear algebra from the second semester of a bachelor's degree in mathematics.

  18. Bifurcation software in Matlab with applications in neuronal modeling.

    Science.gov (United States)

    Govaerts, Willy; Sautois, Bart

    2005-02-01

    Many biological phenomena, notably in neuroscience, can be modeled by dynamical systems. We describe a recent improvement of a Matlab software package for dynamical systems with applications to modeling single neurons and all-to-all connected networks of neurons. The new software features consist of an object-oriented approach to bifurcation computations and the partial inclusion of C-code to speed up the computation. As an application, we study the origin of the spiking behaviour of neurons when the equilibrium state is destabilized by an incoming current. We show that Class II behaviour, i.e. firing with a finite frequency, is possible even if the destabilization occurs through a saddle-node bifurcation. Furthermore, we show that synchronization of an all-to-all connected network of such neurons with only excitatory connections is also possible in this case.

  19. Proper generalized decompositions an introduction to computer implementation with Matlab

    CERN Document Server

    Cueto, Elías; Alfaro, Icíar

    2016-01-01

    This book is intended to help researchers overcome the entrance barrier to Proper Generalized Decomposition (PGD), by providing a valuable tool to begin the programming task. Detailed Matlab Codes are included for every chapter in the book, in which the theory previously described is translated into practice. Examples include parametric problems, non-linear model order reduction and real-time simulation, among others. Proper Generalized Decomposition (PGD) is a method for numerical simulation in many fields of applied science and engineering. As a generalization of Proper Orthogonal Decomposition or Principal Component Analysis to an arbitrary number of dimensions, PGD is able to provide the analyst with very accurate solutions for problems defined in high dimensional spaces, parametric problems and even real-time simulation. .

  20. Numerical simulation of dimples in airfoil using MATLAB

    Science.gov (United States)

    Booma Devi, P.; Shah, Dilip A.

    2017-05-01

    The Aircraft wing is a point of important research which poses greater challenge in terms of aerodynamic efficiency. The flow separation control method is addressed in classical aerodynamics methods. This study focuses on influence of dimples on controlling the flow and also increasing the aerodynamic efficiency. The periodic process of placing the cavities on the wing starting from root to tip controls the flow separation. The linear variation of characteristic curve provides the information about the flow separation and control of flow on upper surface of the airfoil.These different shapes are utilized viz., Square, Rectangle and Triangle. The numerical simulation is carried out in using MATLAB package. Preliminary analysis on the flow separation is carried out focuses on laminar flow separation, which has the influence on the overall lift generation and drag generation.

  1. MATLAB Simulation of RFID Communication Protocol for Sensor Data Acquisition

    Directory of Open Access Journals (Sweden)

    Soumen GHOSH

    2015-05-01

    Full Text Available Data acquisition processes the sampling and conditioning the signals that measure real world physical conditions such as temperature, pressure, flow etc. and convert the signal into in appropriate format for displaying and transmission to remote end. Now a days RFID i.e. Radio Frequency Identification plays a vital role in Data acquisition system. The present article proposes a smart DAS scheme containing RFID reader and Active tag. The data acquisition system is interfaced with tag through I2C bus. The reader communicates with tag following RFID communication protocol requesting to send the logged data which are refreshed and stored into tag memory periodically. The communication is simulated using MATLAB software successfully.

  2. Introduction to Artificial Vision through Laboratory Guides Using Matlab

    Directory of Open Access Journals (Sweden)

    Verónica Londoño-Osorio

    2013-11-01

    Full Text Available This paper presents the design of two laboratory guides in artificial vision for a course which aims to introduce students to the different areas of specialization of his career. Therefore, the designed practices motivate and provide relevant content to the student, and to encourage research in the area of image processing. The first guide presents an introductory practice that explores the basic commands for image processing by programming a GUI in Matlab, and a second practice in which you use an image recognition algorithm, which compares the color characteristics of facial or objects images. The discussion of the results, challenges and recommendations for the development of each practice session are explained. The survey answers of the students are displayed. This survey allows checking their level of acceptance for the design and content of practice and motivation to continue studying in the image processing area. Finally, comparisons with laboratory guides that were designed in other universities are made.

  3. PSYCHOACOUSTICS: a comprehensive MATLAB toolbox for auditory testing.

    Science.gov (United States)

    Soranzo, Alessandro; Grassi, Massimo

    2014-01-01

    PSYCHOACOUSTICS is a new MATLAB toolbox which implements three classic adaptive procedures for auditory threshold estimation. The first includes those of the Staircase family (method of limits, simple up-down and transformed up-down); the second is the Parameter Estimation by Sequential Testing (PEST); and the third is the Maximum Likelihood Procedure (MLP). The toolbox comes with more than twenty built-in experiments each provided with the recommended (default) parameters. However, if desired, these parameters can be modified through an intuitive and user friendly graphical interface and stored for future use (no programming skills are required). Finally, PSYCHOACOUSTICS is very flexible as it comes with several signal generators and can be easily extended for any experiment.

  4. Matlab Stability and Control Toolbox: Trim and Static Stability Module

    Science.gov (United States)

    Crespo, Luis G.; Kenny, Sean P.

    2006-01-01

    This paper presents the technical background of the Trim and Static module of the Matlab Stability and Control Toolbox. This module performs a low-fidelity stability and control assessment of an aircraft model for a set of flight critical conditions. This is attained by determining if the control authority available for trim is sufficient and if the static stability characteristics are adequate. These conditions can be selected from a prescribed set or can be specified to meet particular requirements. The prescribed set of conditions includes horizontal flight, take-off rotation, landing flare, steady roll, steady turn and pull-up/ push-over flight, for which several operating conditions can be specified. A mathematical model was developed allowing for six-dimensional trim, adjustable inertial properties, asymmetric vehicle layouts, arbitrary number of engines, multi-axial thrust vectoring, engine(s)-out conditions, crosswind and gyroscopic effects.

  5. Some selected quantitative methods of thermal image analysis in Matlab.

    Science.gov (United States)

    Koprowski, Robert

    2016-05-01

    The paper presents a new algorithm based on some selected automatic quantitative methods for analysing thermal images. It shows the practical implementation of these image analysis methods in Matlab. It enables to perform fully automated and reproducible measurements of selected parameters in thermal images. The paper also shows two examples of the use of the proposed image analysis methods for the area of ​​the skin of a human foot and face. The full source code of the developed application is also provided as an attachment. The main window of the program during dynamic analysis of the foot thermal image. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. A GUI tool for beta function measurement using MATLAB

    International Nuclear Information System (INIS)

    Chen Guangling; Tian Shunqiang; Liu Guimin; Jiang Bocheng

    2009-01-01

    The beta function measurement is used to detect the shift in the betatron tune as the strength of an individual quadrupole magnet is varied. A GUI (graphic user interface) tool for the beta function measurement is developed using the MATLAB program language in the Linux environment, which facilitates the commissioning of the Shanghai Synchrotron Radiation Facility (SSRF) storage ring. In this paper, we describe the design of the application and give some measuring results and discussions about the definition of the measurement. The program has been optimized to solve some restrictions of the AT tracking code. After the correction with LOCO (linear optics from closed orbits), the horizontal and the vertical root mean square values (rms values) can be reduced to 0.12 and 0.10. (authors)

  7. Associations of PM2.5 and black carbon concentrations with traffic, idling, background pollution, and meteorology during school dismissals.

    Science.gov (United States)

    Richmond-Bryant, J; Saganich, C; Bukiewicz, L; Kalin, R

    2009-05-01

    An air quality study was performed outside a cluster of schools in the East Harlem neighborhood of New York City. PM(2.5) and black carbon concentrations were monitored using real-time equipment with a one-minute averaging interval. Monitoring was performed at 1:45-3:30 PM during school days over the period October 31-November 17, 2006. The designated time period was chosen to capture vehicle emissions during end-of-day dismissals from the schools. During the monitoring period, minute-by-minute volume counts of idling and passing school buses, diesel trucks, and automobiles were obtained. These data were transcribed into time series of number of diesel vehicles idling, number of gasoline automobiles idling, number of diesel vehicles passing, and number of automobiles passing along the block adjacent to the school cluster. Multivariate regression models of the log-transform of PM(2.5) and black carbon (BC) concentrations in the East Harlem street canyon were developed using the observation data and data from the New York State Department of Environmental Conservation on meteorology and background PM(2.5). Analysis of variance was used to test the contribution of each covariate to variability in the log-transformed concentrations as a means to judge the relative contribution of each covariate. The models demonstrated that variability in background PM(2.5) contributes 80.9% of the variability in log[PM(2.5)] and 81.5% of the variability in log[BC]. Local traffic sources were demonstrated to contribute 5.8% of the variability in log[BC] and only 0.43% of the variability in log[PM(2.5)]. Diesel idling and passing were both significant contributors to variability in log[BC], while diesel passing was a significant contributor to log[PM(2.5)]. Automobile idling and passing did not contribute significant levels of variability to either concentration. The remainder of variability in each model was explained by temperature, along-canyon wind, and cross-canyon wind, which were

  8. A MATLAB-Aided Method for Teaching Calculus-Based Business Mathematics

    Science.gov (United States)

    Liang, Jiajuan; Pan, William S. Y.

    2009-01-01

    MATLAB is a powerful package for numerical computation. MATLAB contains a rich pool of mathematical functions and provides flexible plotting functions for illustrating mathematical solutions. The course of calculus-based business mathematics consists of two major topics: 1) derivative and its applications in business; and 2) integration and its…

  9. Matlab for electrical and computer engineering students and professionals with Simulink

    CERN Document Server

    Priemer, Roland

    2013-01-01

    This book combines the teaching of the MATLAB#65533; programming language with the presentation and development of carefully selected electrical and computer engineering (ECE) fundamentals. This is what distinguishes it from other books concerned with MATLAB#65533;: it is directed specifically to ECE concerns.

  10. Scilab and MATLAB Interfaces to MUMPS (version 4.6 or greater)

    OpenAIRE

    Fèvre , Aurélia; Pralet , Stéphane; L'Excellent , Jean-Yves

    2006-01-01

    This document describes the Scilab and MATLAB interfaces to MUMPS version 4.6. We describe the differences and similarities between usual Fortran/C MUMPS interfaces and its Scilab/MATLAB interfaces, the calling sequences and functionalities. Examples of use and experimental results are also provided.

  11. A Matlab/Simulink-Based Interactive Module for Servo Systems Learning

    Science.gov (United States)

    Aliane, N.

    2010-01-01

    This paper presents an interactive module for learning both the fundamental and practical issues of servo systems. This module, developed using Simulink in conjunction with the Matlab graphical user interface (Matlab-GUI) tool, is used to supplement conventional lectures in control engineering and robotics subjects. First, the paper introduces the…

  12. Based on matlab 3d visualization programming in the application of the uranium exploration

    International Nuclear Information System (INIS)

    Qi Jianquan

    2012-01-01

    Combined geological theory, geophysical curve and Matlab programming three dimensional visualization applied to the production of uranium exploration. With a simple Matlab programming, numerical processing and graphical visualization of convenient features, and effective in identifying ore bodies, recourse to ore, ore body delineation of the scope of analysis has played the role of sedimentary environment. (author)

  13. Regularization Tools Version 3.0 for Matlab 5.2

    DEFF Research Database (Denmark)

    Hansen, Per Christian

    1999-01-01

    This communication describes Version 3.0 of Regularization Tools, a Matlab package for analysis and solution of discrete ill-posed problems.......This communication describes Version 3.0 of Regularization Tools, a Matlab package for analysis and solution of discrete ill-posed problems....

  14. OXlearn: a new MATLAB-based simulation tool for connectionist models.

    Science.gov (United States)

    Ruh, Nicolas; Westermann, Gert

    2009-11-01

    OXlearn is a free, platform-independent MATLAB toolbox in which standard connectionist neural network models can be set up, run, and analyzed by means of a user-friendly graphical interface. Due to its seamless integration with the MATLAB programming environment, the inner workings of the simulation tool can be easily inspected and/or extended using native MATLAB commands or components. This combination of usability, transparency, and extendability makes OXlearn an efficient tool for the implementation of basic research projects or the prototyping of more complex research endeavors, as well as for teaching. Both the MATLAB toolbox and a compiled version that does not require access to MATLAB can be downloaded from http://psych.brookes.ac.uk/oxlearn/.

  15. MatLab Programming for Engineers Having No Formal Programming Knowledge

    Science.gov (United States)

    Shaykhian, Linda H.; Shaykhian, Gholam Ali

    2007-01-01

    MatLab is one of the most widely used very high level programming languages for Scientific and engineering computations. It is very user-friendly and needs practically no formal programming knowledge. Presented here are MatLab programming aspects and not just the MatLab commands for scientists and engineers who do not have formal programming training and also have no significant time to spare for learning programming to solve their real world problems. Specifically provided are programs for visualization. Also, stated are the current limitations of the MatLab, which possibly can be taken care of by Mathworks Inc. in a future version to make MatLab more versatile.

  16. Microcontroller USB interfacing with MATLAB GUI for low cost medical ultrasound scanners

    Directory of Open Access Journals (Sweden)

    Jean Rossario Raj

    2016-06-01

    Full Text Available This paper presents an 8051 microcontroller-based control of ultrasound scanner prototype hardware from a host laptop MATLAB GUI. The hardware control of many instruments is carried out by microcontrollers. These microcontrollers are in turn controlled from a GUI residing in a computing machine that is connected over the USB interface. Conventionally such GUIs are developed using ‘C’ language or its variants. But MATLAB GUI is a better tool, when such GUI programs need to do huge image/video processing. However interfacing MATLAB with the microcontroller is a challenging task. Here, MATLAB interfacing through an intermediate MEX ‘C’ language program is presented. This paper outlines the MEX programming methods for achieving the smooth interfacing of microcontrollers with MATLAB GUI.

  17. An Idle-State Detection Algorithm for SSVEP-Based Brain-Computer Interfaces Using a Maximum Evoked Response Spatial Filter.

    Science.gov (United States)

    Zhang, Dan; Huang, Bisheng; Wu, Wei; Li, Siliang

    2015-11-01

    Although accurate recognition of the idle state is essential for the application of brain-computer interfaces (BCIs) in real-world situations, it remains a challenging task due to the variability of the idle state. In this study, a novel algorithm was proposed for the idle state detection in a steady-state visual evoked potential (SSVEP)-based BCI. The proposed algorithm aims to solve the idle state detection problem by constructing a better model of the control states. For feature extraction, a maximum evoked response (MER) spatial filter was developed to extract neurophysiologically plausible SSVEP responses, by finding the combination of multi-channel electroencephalogram (EEG) signals that maximized the evoked responses while suppressing the unrelated background EEGs. The extracted SSVEP responses at the frequencies of both the attended and the unattended stimuli were then used to form feature vectors and a series of binary classifiers for recognition of each control state and the idle state were constructed. EEG data from nine subjects in a three-target SSVEP BCI experiment with a variety of idle state conditions were used to evaluate the proposed algorithm. Compared to the most popular canonical correlation analysis-based algorithm and the conventional power spectrum-based algorithm, the proposed algorithm outperformed them by achieving an offline control state classification accuracy of 88.0 ± 11.1% and idle state false positive rates (FPRs) ranging from 7.4 ± 5.6% to 14.2 ± 10.1%, depending on the specific idle state conditions. Moreover, the online simulation reported BCI performance close to practical use: 22.0 ± 2.9 out of the 24 control commands were correctly recognized and the FPRs achieved as low as approximately 0.5 event/min in the idle state conditions with eye open and 0.05 event/min in the idle state condition with eye closed. These results demonstrate the potential of the proposed algorithm for implementing practical SSVEP BCI systems.

  18. Analysis of glass from the post-Roman settlement Tonovcov grad (Slovenia) by PIXE–PIGE and LA-ICP-MS

    Energy Technology Data Exchange (ETDEWEB)

    Šmit, Ž., E-mail: ziga.smit@fmf.uni-lj.si [Faculty of Mathematics and Physics, University of Ljubljana, Jadranska 19, SI-1000 Ljubljana (Slovenia); Jožef Stefan Institute, Jamova 39, SI-1001 Ljubljana (Slovenia); Milavec, T. [Department of Archaeology, Faculty of Arts, University of Ljubljana, Zavetiška 5, SI-1000 Ljubljana (Slovenia); Fajfar, H. [Jožef Stefan Institute, Jamova 39, SI-1001 Ljubljana (Slovenia); Rehren, Th. [UCL Qatar, Education City, P.O. Box 23689, Doha (Qatar); Lankton, J.W. [UCL Institute of Archaeology, 31-34 Gordon Square, London WC1H 0PY (United Kingdom); Gratuze, B. [IRAMAT-Centre Ernest-Babelon, CNRS Université d’Orléans, 3D rue de la Ferollerie, 45071 Orléans Cedex 2 (France)

    2013-09-15

    The combined PIXE–PIGE method was used for the analysis of 43 glass fragments from the archaeological site Tonovcov grad in western Slovenia, with 10 of these additionally being analysed by LA-ICP-MS. The glass objects were attributed to the Late Antique production of the 4th–7th c. AD, with two examples of early Roman glass and three glass beads, one of them presumably of oriental origin. The analysis showed typical natron-type glass, produced in the Levantine region around the river Belus, and a few examples of HIMT glass, which could be recognized also in several other recycled objects. Only one glass bead, found in Early Medieval context, was made of the ash of halophytic plants.

  19. Promotion of cooperation in the form C0C1D classified by 'degree grads' in a scale-free network

    International Nuclear Information System (INIS)

    Zhao, Li; Ye, Xiang-Jun; Huang, Zi-Gang; Sun, Jin-Tu; Yang, Lei; Wang, Ying-Hai; Do, Younghae

    2010-01-01

    In this paper, we revisit the issue of the public goods game (PGG) on a heterogeneous graph. By introducing a new effective topology parameter, 'degree grads' ψ, we clearly classify the agents into three kinds, namely, C 0 , C 1 , and D. The mechanism for the heterogeneous topology promoting cooperation is discussed in detail from the perspective of C 0 C 1 D, which reflects the fact that the unreasoning imitation behaviour of C 1 agents, who are 'cheated' by the well-paid C 0 agents inhabiting special positions, stabilizes the formation of the cooperation community. The analytical and simulation results for certain parameters are found to coincide well with each other. The C 0 C 1 D case provides a picture of the actual behaviours in real society and thus is potentially of interest

  20. MATLAB simulation software used for the PhD thesis "Acquisition of Multi-Band Signals via Compressed Sensing

    DEFF Research Database (Denmark)

    2014-01-01

    MATLAB simulation software used for the PhD thesis "Acquisition of Multi-Band Signals via Compressed Sensing......MATLAB simulation software used for the PhD thesis "Acquisition of Multi-Band Signals via Compressed Sensing...

  1. Verification tests for GRAD, a computer program to predict nonuniform deformation and failure of Zr-2.5 wt percent Nb pressure tubes during a postulated loss-of-coolant accident

    International Nuclear Information System (INIS)

    Shewfelt, R.S.W.; Godin, D.P.

    1985-03-01

    During a postulated loss-of-coolant accident in a CANDU reactor, the temperature of the pressure tubes could rise sufficiently so that ballooning could occur. It is also likely that there would be a variation in temperature around the tube circumference, causing the deformation to be nonuniform. Since the deformation of the pressure tube controls how the core heat is transferred to the surrounding moderator, which is a large heat sink, a computer program, GRAD, has been developed to predict this nonuniform deformation. Numerous biaxial creep tests were done, where the temperature of internally pressurized sections of Zr-2.5 wt percent Nb pressure tubes were ramped to check the ability of GRAD to predict the resulting nonuniform deformation and possible tube failure. GRAD was successful in predicting the average transverse creep strain observed during the tests and the local transverse creep strain at the end of the tests. GRAD was also able to predict the failure time and average transverse creep strain at failure for all the specimens that failed

  2. Optoelectronic polarimeter controlled by a graphical user interface of Matlab

    International Nuclear Information System (INIS)

    Vilardy, J M; Torres, R; Jimenez, C J

    2017-01-01

    We show the design and implementation of an optical polarimeter using electronic control. The polarimeter has a software with a graphical user interface (GUI) that controls the optoelectronic setup and captures the optical intensity measurement, and finally, this software evaluates the Stokes vector of a state of polarization (SOP) by means of the synchronous detection of optical waves. The proposed optoelectronic polarimeter can determine the Stokes vector of a SOP in a rapid and efficient way. Using the polarimeter proposed in this paper, the students will be able to observe (in an optical bench) and understand the different interactions of the SOP when the optical waves pass through to the linear polarizers and retarder waves plates. The polarimeter prototype could be used as a main tool for the students in order to learn the theory and experimental aspects of the SOP for optical waves via the Stokes vector measurement. The proposed polarimeter controlled by a GUI of Matlab is more attractive and suitable to teach and to learn the polarization of optical waves. (paper)

  3. Development of a fault test experimental facility model using Matlab

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Iraci Martinez; Moraes, Davi Almeida, E-mail: martinez@ipen.br, E-mail: dmoraes@dk8.com.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    The Fault Test Experimental Facility was developed to simulate a PWR nuclear power plant and is instrumented with temperature, level and pressure sensors. The Fault Test Experimental Facility can be operated to generate normal and fault data, and these failures can be added initially small, and their magnitude being increasing gradually. This work presents the Fault Test Experimental Facility model developed using the Matlab GUIDE (Graphical User Interface Development Environment) toolbox that consists of a set of functions designed to create interfaces in an easy and fast way. The system model is based on the mass and energy inventory balance equations. Physical as well as operational aspects are taken into consideration. The interface layout looks like a process flowchart and the user can set the input variables. Besides the normal operation conditions, there is the possibility to choose a faulty variable from a list. The program also allows the user to set the noise level for the input variables. Using the model, data were generated for different operational conditions, both under normal and fault conditions with different noise levels added to the input variables. Data generated by the model will be compared with Fault Test Experimental Facility data. The Fault Test Experimental Facility theoretical model results will be used for the development of a Monitoring and Fault Detection System. (author)

  4. MATLAB Simulation of Photovoltaic and Photovoltaic/Thermal Systems Performance

    Science.gov (United States)

    Nasir, Farah H. M.; Husaini, Yusnira

    2018-03-01

    The efficiency of the photovoltaic reduces when the photovoltaic cell temperature increased due to solar irradiance. One solution is come up with the cooling system photovoltaic system. This combination is forming the photovoltaic-thermal (PV/T) system. Not only will it generate electricity also heat at the same time. The aim of this research is to focus on the modeling and simulation of photovoltaic (PV) and photovoltaic-thermal (PV/T) electrical performance by using single-diode equivalent circuit model. Both PV and PV/T models are developed in Matlab/Simulink. By providing the cooling system in PV/T, the efficiency of the system can be increased by decreasing the PV cell temperature. The maximum thermal, electrical and total efficiency values of PV/T in the present research are 35.18%, 15.56% and 50.74% at solar irradiance of 400 W/m2, mass flow rate of 0.05kgs-1 and inlet temperature of 25 °C respectively has been obtained. The photovoltaic-thermal shows that the higher efficiency performance compared to the photovoltaic system.

  5. Designing an ultrafast laser virtual laboratory using MATLAB GUIDE

    International Nuclear Information System (INIS)

    Cambronero-López, F; Gómez-Varela, A I; Bao-Varela, C

    2017-01-01

    In this work we present a virtual simulator developed using the MATLAB GUIDE environment based on the numerical resolution of the nonlinear Schrödinger equation (NLS) and using the split step method for the study of the spatial–temporal propagation of nonlinear ultrashort laser pulses. This allows us to study the spatial–temporal propagation of ultrafast pulses as well as the influence of high-order spectral phases such as group delay dispersion and third-order dispersion on pulse compression in time. The NLS can describe several nonlinear effects, in particular in this paper we consider the Kerr effect, cross-polarized wave generation and cubic–quintic propagation in order to highlight the potential of this equation combined with the GUIDE environment. Graphical user interfaces are commonly used in science and engineering teaching due to their educational value, and have proven to be an effective way to engage and motivate students. Specifically, the interactive graphical interfaces presented provide the visualization of some of the most important nonlinear optics phenomena and allows users to vary the values of the main parameters involved. (paper)

  6. Development Of Translational Motion Of Unmanned Aerial Vehicle Using MATLAB

    Directory of Open Access Journals (Sweden)

    Thwe Thwe Htoo

    2015-08-01

    Full Text Available This research work describes the translational motion analysis of unmanned aerial vehicle UAV. Since the center of mass of the receiver is timevarying the equations are written in a reference frame that is geometrically fixed in the aircraft. Due to the fact that aerial vehicle simulation and control deal with the position and orientation of the UAV the equations of motion are derived in terms of the translational and rotational position and velocity with respect to the aircraft location. The formation relative motion control is a challenging problem due to the coupled translational and rotational dynamics. As the translational vector depends on the current attitude and its angular velocity and some of the attitude constraints also couple the position and attitude of the spacecraft it makes the formation control problem high dimensional. This work develops UAV stability conditions including translational vector maneuverability condition and included angle condition between the translational and the rotational motion of UAV system and then presents two methods to calculate the UAV attitude. Both of the two methods need first design the optimal trajectory of the translational vector and then use geometric and nonlinear programming methods to calculate the target trajectory. The validity of the proposed approach is demonstrated in a UAV by using MATLAB. The performance of the translational motion control is evaluated by the simulated results.

  7. Wind power limit calculation basedon frequency deviation using Matlab

    International Nuclear Information System (INIS)

    Santos Fuentefria, Ariel; Salgado Duarte, Yorlandis; MejutoFarray, Davis

    2017-01-01

    The utilization of the wind energy for the production of electricity it’s a technology that has promoted itself in the last years, like an alternative before the environmental deterioration and the scarcity of the fossil fuels. When the power generation of wind energy is integrated into the electrical power systems, maybe take place problems in the frequency stability due to, mainly, the stochastic characteristic of the wind and the impossibility of the wind power control on behalf of the dispatchers. In this work, is make an analysis of frequency deviation when the wind power generation rise in an isolated electrical power system. This analysis develops in a computerized frame with the construction of an algorithm using Matlab, which allowed to make several simulations in order to obtain the frequency behavior for different loads and wind power conditions. Besides, it was determined the wind power limit for minimum, medium and maximum load. The results show that the greatest values on wind power are obtained in maximum load condition. However, the minimum load condition limit the introduction of wind power into the system. (author)

  8. MPBEC, a Matlab Program for Biomolecular Electrostatic Calculations.

    Science.gov (United States)

    Vergara-Perez, Sandra; Marucho, Marcelo

    2016-01-01

    One of the most used and efficient approaches to compute electrostatic properties of biological systems is to numerically solve the Poisson-Boltzmann (PB) equation. There are several software packages available that solve the PB equation for molecules in aqueous electrolyte solutions. Most of these software packages are useful for scientists with specialized training and expertise in computational biophysics. However, the user is usually required to manually take several important choices, depending on the complexity of the biological system, to successfully obtain the numerical solution of the PB equation. This may become an obstacle for researchers, experimentalists, even students with no special training in computational methodologies. Aiming to overcome this limitation, in this article we present MPBEC, a free, cross-platform, open-source software that provides non-experts in the field an easy and efficient way to perform biomolecular electrostatic calculations on single processor computers. MPBEC is a Matlab script based on the Adaptative Poisson Boltzmann Solver, one of the most popular approaches used to solve the PB equation. MPBEC does not require any user programming, text editing or extensive statistical skills, and comes with detailed user-guide documentation. As a unique feature, MPBEC includes a useful graphical user interface (GUI) application which helps and guides users to configure and setup the optimal parameters and approximations to successfully perform the required biomolecular electrostatic calculations. The GUI also incorporates visualization tools to facilitate users pre- and post- analysis of structural and electrical properties of biomolecules.

  9. A Series of Computational Neuroscience Labs Increases Comfort with MATLAB.

    Science.gov (United States)

    Nichols, David F

    2015-01-01

    Computational simulations allow for a low-cost, reliable means to demonstrate complex and often times inaccessible concepts to undergraduates. However, students without prior computer programming training may find working with code-based simulations to be intimidating and distracting. A series of computational neuroscience labs involving the Hodgkin-Huxley equations, an Integrate-and-Fire model, and a Hopfield Memory network were used in an undergraduate neuroscience laboratory component of an introductory level course. Using short focused surveys before and after each lab, student comfort levels were shown to increase drastically from a majority of students being uncomfortable or with neutral feelings about working in the MATLAB environment to a vast majority of students being comfortable working in the environment. Though change was reported within each lab, a series of labs was necessary in order to establish a lasting high level of comfort. Comfort working with code is important as a first step in acquiring computational skills that are required to address many questions within neuroscience.

  10. MATLAB Stability and Control Toolbox Trim and Static Stability Module

    Science.gov (United States)

    Kenny, Sean P.; Crespo, Luis

    2012-01-01

    MATLAB Stability and Control Toolbox (MASCOT) utilizes geometric, aerodynamic, and inertial inputs to calculate air vehicle stability in a variety of critical flight conditions. The code is based on fundamental, non-linear equations of motion and is able to translate results into a qualitative, graphical scale useful to the non-expert. MASCOT was created to provide the conceptual aircraft designer accurate predictions of air vehicle stability and control characteristics. The code takes as input mass property data in the form of an inertia tensor, aerodynamic loading data, and propulsion (i.e. thrust) loading data. Using fundamental nonlinear equations of motion, MASCOT then calculates vehicle trim and static stability data for the desired flight condition(s). Available flight conditions include six horizontal and six landing rotation conditions with varying options for engine out, crosswind, and sideslip, plus three take-off rotation conditions. Results are displayed through a unique graphical interface developed to provide the non-stability and control expert conceptual design engineer a qualitative scale indicating whether the vehicle has acceptable, marginal, or unacceptable static stability characteristics. If desired, the user can also examine the detailed, quantitative results.

  11. Designing an ultrafast laser virtual laboratory using MATLAB GUIDE

    Science.gov (United States)

    Cambronero-López, F.; Gómez-Varela, A. I.; Bao-Varela, C.

    2017-05-01

    In this work we present a virtual simulator developed using the MATLAB GUIDE environment based on the numerical resolution of the nonlinear Schrödinger equation (NLS) and using the split step method for the study of the spatial-temporal propagation of nonlinear ultrashort laser pulses. This allows us to study the spatial-temporal propagation of ultrafast pulses as well as the influence of high-order spectral phases such as group delay dispersion and third-order dispersion on pulse compression in time. The NLS can describe several nonlinear effects, in particular in this paper we consider the Kerr effect, cross-polarized wave generation and cubic-quintic propagation in order to highlight the potential of this equation combined with the GUIDE environment. Graphical user interfaces are commonly used in science and engineering teaching due to their educational value, and have proven to be an effective way to engage and motivate students. Specifically, the interactive graphical interfaces presented provide the visualization of some of the most important nonlinear optics phenomena and allows users to vary the values of the main parameters involved.

  12. Efficient MATLAB computations with sparse and factored tensors.

    Energy Technology Data Exchange (ETDEWEB)

    Bader, Brett William; Kolda, Tamara Gibson (Sandia National Lab, Livermore, CA)

    2006-12-01

    In this paper, the term tensor refers simply to a multidimensional or N-way array, and we consider how specially structured tensors allow for efficient storage and computation. First, we study sparse tensors, which have the property that the vast majority of the elements are zero. We propose storing sparse tensors using coordinate format and describe the computational efficiency of this scheme for various mathematical operations, including those typical to tensor decomposition algorithms. Second, we study factored tensors, which have the property that they can be assembled from more basic components. We consider two specific types: a Tucker tensor can be expressed as the product of a core tensor (which itself may be dense, sparse, or factored) and a matrix along each mode, and a Kruskal tensor can be expressed as the sum of rank-1 tensors. We are interested in the case where the storage of the components is less than the storage of the full tensor, and we demonstrate that many elementary operations can be computed using only the components. All of the efficiencies described in this paper are implemented in the Tensor Toolbox for MATLAB.

  13. Calculus Problem Solution And Simulation Using GUI Of Matlab

    Directory of Open Access Journals (Sweden)

    Syaharuddin

    2017-09-01

    Full Text Available This research aims to develop the project application in teaching and learning Calculus using Grapichal User Interface GUI of Matlab. The scope of the development result includes 1 PreCalculus 2 Function Limit 3 Derivative and its application and 4 Integral and its application. Every aspect of development is presented according to the standards of material competence learning achievement indicators and solutions or settlement steps on each issue presented. This project application can be used by lecturers and students in universities to improve motivation mastery of material and student learning outcomes in the Calculus course. Development of this project application is done through 4 stages called 4-D namely Define Design Development and Dissemination. Based on the data analysis the results obtained at the validation stage of expert validity level average of 3.575 which means quite valid. Then on a limited trial the average student gave a response of 92.00 which means very good. While in the first field trial the average student gave a response of 89.30 which means very good and in the second field trial the average student gave a responded of 90.15 which means very good. Besides that we also solve computational calculus problems in Edwin J. Purcell Dale Varbergs Book of Volume 1 of Edition 5 of 48 questions that are divided into 64 cases.

  14. MPBEC, a Matlab Program for Biomolecular Electrostatic Calculations

    Science.gov (United States)

    Vergara-Perez, Sandra; Marucho, Marcelo

    2016-01-01

    One of the most used and efficient approaches to compute electrostatic properties of biological systems is to numerically solve the Poisson-Boltzmann (PB) equation. There are several software packages available that solve the PB equation for molecules in aqueous electrolyte solutions. Most of these software packages are useful for scientists with specialized training and expertise in computational biophysics. However, the user is usually required to manually take several important choices, depending on the complexity of the biological system, to successfully obtain the numerical solution of the PB equation. This may become an obstacle for researchers, experimentalists, even students with no special training in computational methodologies. Aiming to overcome this limitation, in this article we present MPBEC, a free, cross-platform, open-source software that provides non-experts in the field an easy and efficient way to perform biomolecular electrostatic calculations on single processor computers. MPBEC is a Matlab script based on the Adaptative Poisson-Boltzmann Solver, one of the most popular approaches used to solve the PB equation. MPBEC does not require any user programming, text editing or extensive statistical skills, and comes with detailed user-guide documentation. As a unique feature, MPBEC includes a useful graphical user interface (GUI) application which helps and guides users to configure and setup the optimal parameters and approximations to successfully perform the required biomolecular electrostatic calculations. The GUI also incorporates visualization tools to facilitate users pre- and post-analysis of structural and electrical properties of biomolecules.

  15. Development of a fault test experimental facility model using Matlab

    International Nuclear Information System (INIS)

    Pereira, Iraci Martinez; Moraes, Davi Almeida

    2015-01-01

    The Fault Test Experimental Facility was developed to simulate a PWR nuclear power plant and is instrumented with temperature, level and pressure sensors. The Fault Test Experimental Facility can be operated to generate normal and fault data, and these failures can be added initially small, and their magnitude being increasing gradually. This work presents the Fault Test Experimental Facility model developed using the Matlab GUIDE (Graphical User Interface Development Environment) toolbox that consists of a set of functions designed to create interfaces in an easy and fast way. The system model is based on the mass and energy inventory balance equations. Physical as well as operational aspects are taken into consideration. The interface layout looks like a process flowchart and the user can set the input variables. Besides the normal operation conditions, there is the possibility to choose a faulty variable from a list. The program also allows the user to set the noise level for the input variables. Using the model, data were generated for different operational conditions, both under normal and fault conditions with different noise levels added to the input variables. Data generated by the model will be compared with Fault Test Experimental Facility data. The Fault Test Experimental Facility theoretical model results will be used for the development of a Monitoring and Fault Detection System. (author)

  16. 'tomo_display' and 'vol_tools': IDL VM Packages for Tomography Data Reconstruction, Processing, and Visualization

    Science.gov (United States)

    Rivers, M. L.; Gualda, G. A.

    2009-05-01

    One of the challenges in tomography is the availability of suitable software for image processing and analysis in 3D. We present here 'tomo_display' and 'vol_tools', two packages created in IDL that enable reconstruction, processing, and visualization of tomographic data. They complement in many ways the capabilities offered by Blob3D (Ketcham 2005 - Geosphere, 1: 32-41, DOI: 10.1130/GES00001.1) and, in combination, allow users without programming knowledge to perform all steps necessary to obtain qualitative and quantitative information using tomographic data. The package 'tomo_display' was created and is maintained by Mark Rivers. It allows the user to: (1) preprocess and reconstruct parallel beam tomographic data, including removal of anomalous pixels, ring artifact reduction, and automated determination of the rotation center, (2) visualization of both raw and reconstructed data, either as individual frames, or as a series of sequential frames. The package 'vol_tools' consists of a series of small programs created and maintained by Guilherme Gualda to perform specific tasks not included in other packages. Existing modules include simple tools for cropping volumes, generating histograms of intensity, sample volume measurement (useful for porous samples like pumice), and computation of volume differences (for differential absorption tomography). The module 'vol_animate' can be used to generate 3D animations using rendered isosurfaces around objects. Both packages use the same NetCDF format '.volume' files created using code written by Mark Rivers. Currently, only 16-bit integer volumes are created and read by the packages, but floating point and 8-bit data can easily be stored in the NetCDF format as well. A simple GUI to convert sequences of tiffs into '.volume' files is available within 'vol_tools'. Both 'tomo_display' and 'vol_tools' include options to (1) generate onscreen output that allows for dynamic visualization in 3D, (2) save sequences of tiffs to disk

  17. Arquitectura para balancear carga dinámica por demanda adaptativa, utilizando CORBA en JAVA-IDL

    OpenAIRE

    Jesús Chávez Esparza; Gerardo Rentería Castillo; Francisco Javier Luna Rosas

    2008-01-01

    En este trabajo desglosaremos la elaboración de una nueva Arquitectura para balancear carga dinámica, por demanda adaptativa, utilizando CORBA en JAVA-IDL. Una arquitectura de balanceo de carga es un sistema que permite distribuir el trabajo computacional entre varias máquinas, con el objetivo de reducir el tiempo de respuesta global del sistema. A través de las pruebas se justifica el uso de la arquitectura y se definen los parámetros a considerar para obtener un óptimo desempeño, refiriéndo...

  18. Fabrication of 4-cylinder transparent engine and measurement of the flame propagation behavior with high speed camera at idle condition

    Energy Technology Data Exchange (ETDEWEB)

    Joo, S.H. [Yonsei University Graduate School, Seoul (Korea, Republic of); Chun, K.M. [Yonse University, Seoul (Korea, Republic of)

    1998-04-01

    A transparent engine for visualization study is made using a production 4 cylinder engine. Flame propagation results from individual combustion cycles with high-speed cinematography are presented and discussed for idle condition. The flame propagation image and the in-cylinder pressure were obtained simultaneously, and the image processing software which can calculate the flame area and the flame center was developed. The flame propagation behavior of each cycle shows high cyclic variations, and there are linear correlation between flame area and the in-cylinder pressure. (author). 4 refs., 6 figs., 1 tab.

  19. Matlab Geochemistry: An open source geochemistry solver based on MRST

    Science.gov (United States)

    McNeece, C. J.; Raynaud, X.; Nilsen, H.; Hesse, M. A.

    2017-12-01

    The study of geological systems often requires the solution of complex geochemical relations. To address this need we present an open source geochemical solver based on the Matlab Reservoir Simulation Toolbox (MRST) developed by SINTEF. The implementation supports non-isothermal multicomponent aqueous complexation, surface complexation, ion exchange, and dissolution/precipitation reactions. The suite of tools available in MRST allows for rapid model development, in particular the incorporation of geochemical calculations into transport simulations of multiple phases, complex domain geometry and geomechanics. Different numerical schemes and additional physics can be easily incorporated into the existing tools through the object-oriented framework employed by MRST. The solver leverages the automatic differentiation tools available in MRST to solve arbitrarily complex geochemical systems with any choice of species or element concentration as input. Four mathematical approaches enable the solver to be quite robust: 1) the choice of chemical elements as the basis components makes all entries in the composition matrix positive thus preserving convexity, 2) a log variable transformation is used which transfers the nonlinearity to the convex composition matrix, 3) a priori bounds on variables are calculated from the structure of the problem, constraining Netwon's path and 4) an initial guess is calculated implicitly by sequentially adding model complexity. As a benchmark we compare the model to experimental and semi-analytic solutions of the coupled salinity-acidity transport system. Together with the reservoir simulation capabilities of MRST the solver offers a promising tool for geochemical simulations in reservoir domains for applications in a diversity of fields from enhanced oil recovery to radionuclide storage.

  20. GISMO: A MATLAB toolbox for seismic research, monitoring, & education

    Science.gov (United States)

    Thompson, G.; Reyes, C. G.; Kempler, L. A.

    2017-12-01

    GISMO is an open-source MATLAB toolbox which provides an object-oriented framework to build workflows and applications that read, process, visualize and write seismic waveform, catalog and instrument response data. GISMO can retrieve data from a variety of sources (e.g. FDSN web services, Earthworm/Winston servers) and data formats (SAC, Seisan, etc.). It can handle waveform data that crosses file boundaries. All this alleviates one of the most time consuming part for scientists developing their own codes. GISMO simplifies seismic data analysis by providing a common interface for your data, regardless of its source. Several common plots are built-in to GISMO, such as record section plots, spectrograms, depth-time sections, event count per unit time, energy release per unit time, etc. Other visualizations include map views and cross-sections of hypocentral data. Several common processing methods are also included, such as an extensive set of tools for correlation analysis. Support is being added to interface GISMO with ObsPy. GISMO encourages community development of an integrated set of codes and accompanying documentation, eliminating the need for seismologists to "reinvent the wheel". By sharing code the consistency and repeatability of results can be enhanced. GISMO is hosted on GitHub with documentation both within the source code and in the project wiki. GISMO has been used at the University of South Florida and University of Alaska Fairbanks in graduate-level courses including Seismic Data Analysis, Time Series Analysis and Computational Seismology. GISMO has also been tailored to interface with the common seismic monitoring software and data formats used by volcano observatories in the US and elsewhere. As an example, toolbox training was delivered to researchers at INETER (Nicaragua). Applications built on GISMO include IceWeb (e.g. web-based spectrograms), which has been used by Alaska Volcano Observatory since 1998 and became the prototype for the USGS

  1. Cluster implementation for parallel computation within MATLAB software environment

    International Nuclear Information System (INIS)

    Santana, Antonio O. de; Dantas, Carlos C.; Charamba, Luiz G. da R.; Souza Neto, Wilson F. de; Melo, Silvio B. Melo; Lima, Emerson A. de O.

    2013-01-01

    A cluster for parallel computation with MATLAB software the COCGT - Cluster for Optimizing Computing in Gamma ray Transmission methods, is implemented. The implementation correspond to creation of a local net of computers, facilities and configurations of software, as well as the accomplishment of cluster tests for determine and optimizing of performance in the data processing. The COCGT implementation was required by data computation from gamma transmission measurements applied to fluid dynamic and tomography reconstruction in a FCC-Fluid Catalytic Cracking cold pilot unity, and simulation data as well. As an initial test the determination of SVD - Singular Values Decomposition - of random matrix with dimension (n , n), n=1000, using the Girco's law modified, revealed that COCGT was faster in comparison to the literature [1] cluster, which is similar and operates at the same conditions. Solution of a system of linear equations provided a new test for the COCGT performance by processing a square matrix with n=10000, computing time was 27 s and for square matrix with n=12000, computation time was 45 s. For determination of the cluster behavior in relation to 'parfor' (parallel for-loop) and 'spmd' (single program multiple data), two codes were used containing those two commands and the same problem: determination of SVD of a square matrix with n= 1000. The execution of codes by means of COCGT proved: 1) for the code with 'parfor', the performance improved with the labs number from 1 to 8 labs; 2) for the code 'spmd', just 1 lab (core) was enough to process and give results in less than 1 s. In similar situation, with the difference that now the SVD will be determined from square matrix with n1500, for code with 'parfor', and n=7000, for code with 'spmd'. That results take to conclusions: 1) for the code with 'parfor', the behavior was the same already described above; 2) for code with 'spmd', the same besides having produced a larger performance, it supports a

  2. In-Cabin Air Quality during Driving and Engine Idling in Air-Conditioned Private Vehicles in Hong Kong.

    Science.gov (United States)

    Barnes, Natasha Maria; Ng, Tsz Wai; Ma, Kwok Keung; Lai, Ka Man

    2018-03-27

    Many people spend lengthy periods each day in enclosed vehicles in Hong Kong. However, comparably limited data is available about in-cabin air quality in air-conditioned private vehicles, and the car usage that may affect the air quality. Fifty-one vehicles were tested for particulate matter (PM 0.3 and PM 2.5 ), total volatile organic compounds (TVOCs), carbon monoxide (CO), carbon dioxide (CO₂), airborne bacteria, and fungi levels during their routine travel journey. Ten of these vehicles were further examined for PM 0.3 , PM 2.5 , TVOCs, CO, and CO₂ during engine idling. In general, during driving PM 2.5 levels in-cabin reduced overtime, but not PM 0.3 . For TVOCs, 24% vehicles exceeded the recommended Indoor Air Quality (IAQ) level in offices and public places set by the Hong Kong Environmental Protection Department. The total volatile organic compounds (TVOC) concentration positively correlated with the age of the vehicle. Carbon monoxide (CO) levels in all of the vehicles were lower than the IAQ recommendation, while 96% vehicles exceeded the recommended CO₂ level of 1000 ppmv; 16% vehicles >5000 ppmv. Microbial counts were relatively low. TVOCs levels at idle engine were higher than that during driving. Although the time we spend in vehicles is short, the potential exposure to high levels of pollutants should not be overlooked.

  3. In-Cabin Air Quality during Driving and Engine Idling in Air-Conditioned Private Vehicles in Hong Kong

    Directory of Open Access Journals (Sweden)

    Natasha Maria Barnes

    2018-03-01

    Full Text Available Many people spend lengthy periods each day in enclosed vehicles in Hong Kong. However, comparably limited data is available about in-cabin air quality in air-conditioned private vehicles, and the car usage that may affect the air quality. Fifty-one vehicles were tested for particulate matter (PM0.3 and PM2.5, total volatile organic compounds (TVOCs, carbon monoxide (CO, carbon dioxide (CO2, airborne bacteria, and fungi levels during their routine travel journey. Ten of these vehicles were further examined for PM0.3, PM2.5, TVOCs, CO, and CO2 during engine idling. In general, during driving PM2.5 levels in-cabin reduced overtime, but not PM0.3. For TVOCs, 24% vehicles exceeded the recommended Indoor Air Quality (IAQ level in offices and public places set by the Hong Kong Environmental Protection Department. The total volatile organic compounds (TVOC concentration positively correlated with the age of the vehicle. Carbon monoxide (CO levels in all of the vehicles were lower than the IAQ recommendation, while 96% vehicles exceeded the recommended CO2 level of 1000 ppmv; 16% vehicles >5000 ppmv. Microbial counts were relatively low. TVOCs levels at idle engine were higher than that during driving. Although the time we spend in vehicles is short, the potential exposure to high levels of pollutants should not be overlooked.

  4. Energy-efficient pulse-coupled synchronization strategy design for wireless sensor networks through reduced idle listening

    Science.gov (United States)

    Wang, Yongqiang; Núñez, Felipe; Doyle, Francis J.

    2013-01-01

    Synchronization is crucial to wireless sensor networks due to their decentralized structure. We propose an energy-efficient pulse-coupled synchronization strategy to achieve this goal. The basic idea is to reduce idle listening by intentionally introducing a large refractory period in the sensors’ cooperation. The large refractory period greatly reduces idle listening in each oscillation period, and is analytically proven to have no influence on the time to synchronization. Hence, it significantly reduces the total energy consumption in a synchronization process. A topology control approach tailored for pulse-coupled synchronization is given to guarantee a k-edge strongly connected interaction topology, which is tolerant to communication-link failures. The topology control approach is totally decentralized and needs no information exchange among sensors, and it is applicable to dynamic network topologies as well. This facilitates a completely decentralized implementation of the synchronization strategy. The strategy is applicable to mobile sensor networks, too. QualNet case studies confirm the effectiveness of the synchronization strategy. PMID:24307831

  5. SVD application in image and data compression - Some case studies in oceanography (Developed in MATLAB)

    Digital Repository Service at National Institute of Oceanography (India)

    Murty, T.V.R.; Rao, M.M.M.; SuryaPrakash, S.; Chandramouli, P.; Murthy, K.S.R.

    An integrated friendly-user interactive multiple Ocean Application Pacakage has been developed utilizing the well known statistical technique called Singular Value Decomposition (SVD) to achieve image and data compression in MATLAB environment...

  6. Mathematical Formulation used by MATLAB Code to Convert FTIR Interferograms to Calibrated Spectra

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, Derek Elswick [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-07-19

    This report discusses the mathematical procedures used to convert raw interferograms from Fourier transform infrared (FTIR) sensors to calibrated spectra. The work discussed in this report was completed as part of the Helios project at Los Alamos National Laboratory. MATLAB code was developed to convert the raw interferograms to calibrated spectra. The report summarizes the developed MATLAB scripts and functions, along with a description of the mathematical methods used by the code. The first step in working with raw interferograms is to convert them to uncalibrated spectra by applying an apodization function to the raw data and then by performing a Fourier transform. The developed MATLAB code also addresses phase error correction by applying the Mertz method. This report provides documentation for the MATLAB scripts.

  7. ImageJ-MATLAB: a bidirectional framework for scientific image analysis interoperability.

    Science.gov (United States)

    Hiner, Mark C; Rueden, Curtis T; Eliceiri, Kevin W

    2017-02-15

    ImageJ-MATLAB is a lightweight Java library facilitating bi-directional interoperability between MATLAB and ImageJ. By defining a standard for translation between matrix and image data structures, researchers are empowered to select the best tool for their image-analysis tasks. Freely available extension to ImageJ2 ( http://imagej.net/Downloads ). Installation and use instructions available at http://imagej.net/MATLAB_Scripting. Tested with ImageJ 2.0.0-rc-54 , Java 1.8.0_66 and MATLAB R2015b. eliceiri@wisc.edu. Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

  8. The method in γ spectrum analysis with artificial neural network based on MATLAB

    International Nuclear Information System (INIS)

    Bai Lixin; Zhang Yiyun; Xu Jiayun; Wu Liping

    2003-01-01

    Analyzing γ spectrum with artificial neural network have the advantage of using the information of whole spectrum and having high analyzing precision. A convenient realization based on MATLAB was present in this

  9. Responsive Graphical User Interface (ReGUI) and its Implementation in MATLAB

    OpenAIRE

    Mikulszky, Matej; Pocsova, Jana; Mojzisova, Andrea; Podlubny, Igor

    2017-01-01

    In this paper we introduce the responsive graphical user interface (ReGUI) approach to creating applications, and demonstrate how this approach can be implemented in MATLAB. The same general technique can be used in other programming languages.

  10. Pemrograman Graphical User Interface (GUI) Dengan Matlab Untuk Mendesain Alat Bantu Opersai Matematika

    OpenAIRE

    Butar Butar, Ronisah Putra

    2011-01-01

    Graphical User Interface ( GUI) is a application program orient visual which woke up with graphical obyek in the place of comand of text for the user interaction. Graphical User Interface ( GUI) in MATLAB embraced in a application of GUIDE ( Graphical User Interface Builder). In this paper will be discuss about how disagning a appliance assist mathematics operation with program of Graphical User Interface ( GUI) with MATLAB with aim to as one of the appliance alternative assist...

  11. Matlab based Toolkits used to Interface with Optical Design Software for NASA's James Webb Space Telescope

    Science.gov (United States)

    Howard, Joseph

    2007-01-01

    The viewgraph presentation provides an introduction to the James Webb Space Telescope (JWST). The first part provides a brief overview of Matlab toolkits including CodeV, OSLO, and Zemax Toolkits. The toolkit overview examines purpose, layout, how Matlab gets data from CodeV, function layout, and using cvHELP. The second part provides examples of use with JWST, including wavefront sensitivities and alignment simulations.

  12. Hyperspectral imaging in medicine: image pre-processing problems and solutions in Matlab.

    Science.gov (United States)

    Koprowski, Robert

    2015-11-01

    The paper presents problems and solutions related to hyperspectral image pre-processing. New methods of preliminary image analysis are proposed. The paper shows problems occurring in Matlab when trying to analyse this type of images. Moreover, new methods are discussed which provide the source code in Matlab that can be used in practice without any licensing restrictions. The proposed application and sample result of hyperspectral image analysis. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Orthogonal transformations for change detection, Matlab code (ENVI-like headers)

    DEFF Research Database (Denmark)

    2007-01-01

    Matlab code to do (iteratively reweighted) multivariate alteration detection (MAD) analysis, maximum autocorrelation factor (MAF) analysis, canonical correlation analysis (CCA) and principal component analysis (PCA) on image data; accommodates ENVI (like) header files.......Matlab code to do (iteratively reweighted) multivariate alteration detection (MAD) analysis, maximum autocorrelation factor (MAF) analysis, canonical correlation analysis (CCA) and principal component analysis (PCA) on image data; accommodates ENVI (like) header files....

  14. System Simulation of Nuclear Power Plant by Coupling RELAP5 and Matlab/Simulink

    International Nuclear Information System (INIS)

    Meng Lin; Dong Hou; Zhihong Xu; Yanhua Yang; Ronghua Zhang

    2006-01-01

    Since RELAP5 code has general and advanced features in thermal-hydraulic computation, it has been widely used in transient and accident safety analysis, experiment planning analysis, and system simulation, etc. So we wish to design, analyze, verify a new Instrumentation And Control (I and C) system of Nuclear Power Plant (NPP) based on the best-estimated code, and even develop our engineering simulator. But because of limited function of simulating control and protection system in RELAP5, it is necessary to expand the function for high efficient, accurate, flexible design and simulation of I and C system. Matlab/Simulink, a scientific computation software, just can compensate the limitation, which is a powerful tool in research and simulation of plant process control. The software is selected as I and C part to be coupled with RELAP5 code to realize system simulation of NPPs. There are two key techniques to be solved. One is the dynamic data exchange, by which Matlab/Simulink receives plant parameters and returns control results. Database is used to communicate the two codes. Accordingly, Dynamic Link Library (DLL) is applied to link database in RELAP5, while DLL and S-Function is applied in Matlab/Simulink. The other problem is synchronization between the two codes for ensuring consistency in global simulation time. Because Matlab/Simulink always computes faster than RELAP5, the simulation time is sent by RELAP5 and received by Matlab/Simulink. A time control subroutine is added into the simulation procedure of Matlab/Simulink to control its simulation advancement. Through these ways, Matlab/Simulink is dynamically coupled with RELAP5. Thus, in Matlab/Simulink, we can freely design control and protection logic of NPPs and test it with best-estimated plant model feedback. A test will be shown to illuminate that results of coupling calculation are nearly the same with one of single RELAP5 with control logic. In practice, a real Pressurized Water Reactor (PWR) is

  15. Values of decentralized systems that avoid investments in idle capacity within the wastewater sector: a theoretical justification.

    Science.gov (United States)

    Wang, Sheng

    2014-04-01

    In this work, the values of decentralized (onsite) systems that avoid investments in idle capacity within wastewater plans are quantitatively justified using the specific net present value (SNPV) approach. SNPV is a currently proposed criterion in environmental engineering economics that is defined as the net present value of the cost per unit of service or per population equivalent (PE). The SNPV approach was reintroduced with bugs fixed and then applied to the economic analysis of the capital and operating costs of one-stage completed central plants, stage-expanded central plants, and decentralized treatment facilities. The results show that under a demand growth scenario, the central plant will inevitably reach idle capacity, which can be reduced by a staged expansion. However, the staged expansion plan will lose the economies of scale and, hence, is only viable under projections of a low or moderate price inflation rate or high demand growth rate. Onsite treatment systems can theoretically achieve 100% utilization. Assuming that the capital costs per PE of the onsite and central systems are equal, the former is economically favorable in most cases of price inflation as a result of its cost saving on idle capacity. Onsite treatment systems can be viable even though their capital expenditures per PE are higher than that of a comparable centralized option as to a capital investment. This finding suggests wide opening of onsite technology choices. Use of the SNPV showed that average operating expenses of centralized plants decrease as demand growth rates increase as a benefit of economies of scale, whereas those of onsite treatment systems depend only on price inflation. Semi-decentralized systems feature both the financial advantage of the onsite system (capital investment) and the superiority of centralized systems (operation and maintenance); thus, it is worth consideration. The results of this study illustrate not only the value of decentralized systems but

  16. PRISM: Processing routines in IDL for spectroscopic measurements (installation manual and user's guide, version 1.0)

    Science.gov (United States)

    Kokaly, Raymond F.

    2011-01-01

    This report describes procedures for installing and using the U.S. Geological Survey Processing Routines in IDL for Spectroscopic Measurements (PRISM) software. PRISM provides a framework to conduct spectroscopic analysis of measurements made using laboratory, field, airborne, and space-based spectrometers. Using PRISM functions, the user can compare the spectra of materials of unknown composition with reference spectra of known materials. This spectroscopic analysis allows the composition of the material to be identified and characterized. Among its other functions, PRISM contains routines for the storage of spectra in database files, import/export of ENVI spectral libraries, importation of field spectra, correction of spectra to absolute reflectance, arithmetic operations on spectra, interactive continuum removal and comparison of spectral features, correction of imaging spectrometer data to ground-calibrated reflectance, and identification and mapping of materials using spectral feature-based analysis of reflectance data. This report provides step-by-step instructions for installing the PRISM software and running its functions.

  17. Labbtex: Toolbox para generación de informes en LATEX para Matlab

    Directory of Open Access Journals (Sweden)

    José Luis Almazán Gárate

    2012-10-01

    Full Text Available En este artículo se presenta el software desarrollado por el Equipo H3lite dentro del Departamento de Ingeneniería Civil. Transportes de la Escuela de Ingenieros de Caminos, Canales y Puertos de la Universidad Politécnica de Madrid para la generación de informes enLATEX mediante el software Matlab® y la integración en sus rutinas, Labbtex.La librería Labbtex proporciona un marco flexible para mezclar texto y código Matlab® para la generación automática de documentos. Un rchivo fuente simple contiene el texto de documentación y el código Matlab, al correr la aplicación se genera un documento final LATEX que contiene el texto, gráficos y tablas indicados con el formato de un documento LATEX. El código Matlab genera un documento LATEX usando la sintaxis. Así, LATEX (para composición de texto de alta calidad y Matlab® (para cálculo matemático pueden usarse simultáneamente. Esto permite la generación de informes en tiempo real con un uso de recursos mínimo.

  18. Evolutionary heuristic for makespan minimization in no-idle flow shop production systems - doi: 10.4025/actascitechnol.v35i2.12534

    Directory of Open Access Journals (Sweden)

    Marcelo Seido Nagano

    2013-04-01

    Full Text Available This paper deals with no-idle flow shop scheduling problem with the objective of minimizing makespan. A new hybrid metaheuristic is proposed for the scheduling problem solution. The proposed method is compared with the best method reported in the literature. Experimental results show that the new method provides better solutions regarding the solution quality to set of problems evaluated.  

  19. The use of MATLAB-SIMULINK for evaluation of thermal building behavior; O uso do MATLAB-SIMULINK para avaliacao do comportamento termico de ambientes

    Energy Technology Data Exchange (ETDEWEB)

    Mendes, Nathan; Oliveira, Gustavo H.C.; Araujo, Humberto X. de [Pontificia Universidade Catolica do Parana, Curitiba, PR (Brazil). Lab. de Sistemas Termicos]|[Pontificia Universidade Catolica do Parana, Curitiba, PR (Brazil). Lab. de Automacao e Sistemas]. E-mail: nmendes@ccet.pucpr.br; oliv@ ccet.pucpr.br; araujo@ ccet.pucpr.br

    2000-07-01

    We describe a mathematical model applied to both building thermal analysis and control systems design. We use a lumped approach to model the room air temperature and a multi-layer model for the building envelope. The capacitance model allows to study the transient analysis of room air temperature when it is submitted to sinusoidal variation of external air temperature, representing a case study for the city of Curitiba-PR, Brazil. To evaluate the building performance with thermal parameters, we use MATLAB/SIMULINK. In the results section, we show the influences of thermal capacitance on the building air temperature and energy consumption and the advantages of using MATLAB/SIMULINK in building thermal and energy analysis as well. (author)

  20. Abaqus2Matlab: A suitable tool for finite element post-processing

    DEFF Research Database (Denmark)

    Papazafeiropoulos, George; Muñiz-Calvente, Miguel; Martínez Pañeda, Emilio

    2017-01-01

    A suitable piece of software is presented to connect Abaqus, a sophisticated finite element package, with Matlab, the most comprehensive program for mathematical analysis. This interface between these well- known codes not only benefits from the image processing and the integrated graph-plotting ......A suitable piece of software is presented to connect Abaqus, a sophisticated finite element package, with Matlab, the most comprehensive program for mathematical analysis. This interface between these well- known codes not only benefits from the image processing and the integrated graph...... crack propagation in structural materials by means of a cohesive zone approach. The source code, detailed documentation and a large number of tutorials can be freely downloaded from www.abaqus2matlab.com ....

  1. ABAQUS2MATLAB: A Novel Tool for Finite Element Post-Processing

    DEFF Research Database (Denmark)

    Martínez Pañeda, Emilio; Papazafeiropoulos, George; Muniz-Calvente, Miguel

    2017-01-01

    A novel piece of software is presented to connect Abaqus, a sophisticated finite element package, with Matlab, the most comprehensive program for mathematical analysis. This interface between these well-known codes not only benefits from the image processing and the integrated graph-plotting feat......A novel piece of software is presented to connect Abaqus, a sophisticated finite element package, with Matlab, the most comprehensive program for mathematical analysis. This interface between these well-known codes not only benefits from the image processing and the integrated graph...... to demonstrate its capabilities. The source code, detailed documentation and a large number of tutorials can be freely downloaded from www.abaqus2matlab.com....

  2. Measuring modules for the research of compensators of reactive power with voltage stabilization in MATLAB

    Science.gov (United States)

    Vlasayevsky, Stanislav; Klimash, Stepan; Klimash, Vladimir

    2017-10-01

    A set of mathematical modules was developed for evaluation the energy performance in the research of electrical systems and complexes in the MatLab. In the electrotechnical library SimPowerSystems of the MatLab software, there are no measuring modules of energy coefficients characterizing the quality of electricity and the energy efficiency of electrical apparatus. Modules are designed to calculate energy coefficients characterizing the quality of electricity (current distortion and voltage distortion) and energy efficiency indicators (power factor and efficiency) are presented. There are described the methods and principles of building the modules. The detailed schemes of modules built on the elements of the Simulink Library are presented, in this connection, these modules are compatible with mathematical models of electrical systems and complexes in the MatLab. Also there are presented the results of the testing of the developed modules and the results of their verification on the schemes that have analytical expressions of energy indicators.

  3. Parallel Sequential Monte Carlo for Efficient Density Combination: The Deco Matlab Toolbox

    DEFF Research Database (Denmark)

    Casarin, Roberto; Grassi, Stefano; Ravazzolo, Francesco

    This paper presents the Matlab package DeCo (Density Combination) which is based on the paper by Billio et al. (2013) where a constructive Bayesian approach is presented for combining predictive densities originating from different models or other sources of information. The combination weights...... for standard CPU computing and for Graphical Process Unit (GPU) parallel computing. For the GPU implementation we use the Matlab parallel computing toolbox and show how to use General Purposes GPU computing almost effortless. This GPU implementation comes with a speed up of the execution time up to seventy...... times compared to a standard CPU Matlab implementation on a multicore CPU. We show the use of the package and the computational gain of the GPU version, through some simulation experiments and empirical applications....

  4. Algorithm 873: LSTRS: MATLAB Software for Large-Scale Trust-Region Subproblems and Regularization

    DEFF Research Database (Denmark)

    Rojas Larrazabal, Marielba de la Caridad; Santos, Sandra A.; Sorensen, Danny C.

    2008-01-01

    A MATLAB 6.0 implementation of the LSTRS method is resented. LSTRS was described in Rojas, M., Santos, S.A., and Sorensen, D.C., A new matrix-free method for the large-scale trust-region subproblem, SIAM J. Optim., 11(3):611-646, 2000. LSTRS is designed for large-scale quadratic problems with one...... at each step. LSTRS relies on matrix-vector products only and has low and fixed storage requirements, features that make it suitable for large-scale computations. In the MATLAB implementation, the Hessian matrix of the quadratic objective function can be specified either explicitly, or in the form...... of a matrix-vector multiplication routine. Therefore, the implementation preserves the matrix-free nature of the method. A description of the LSTRS method and of the MATLAB software, version 1.2, is presented. Comparisons with other techniques and applications of the method are also included. A guide...

  5. Visualization problems in conductor thermal aging resp. comparison of matlab and gnuplot graphical outputs

    International Nuclear Information System (INIS)

    Beza, J.; Heckenbergerova, J.

    2012-01-01

    The main aim of this paper is comparison of Matlab and Gnuplot software suitability for visualization of results in electro energetic and electro engineering domain. Whole contribution is targeted on specific graphical outputs in problematic of thermal aging of overhead power transmission lines. First, all graphical outputs determined for comparison are visualized in Matlab and furthermore strengths and disadvantages of this implementation are described. Same graphics are then created by free software Gnuplot and finally comparison of both visualization software is made. Last part of the contribution contains main rules and tips about Gnuplot visualization and can be used as User Handbook. The major target of this contribution is to show advantages and shortcomings of Matlab graphical outputs together with introduction of Gnuplot software and suitable alternative for visualization of electrotechnical results. (Authors)

  6. MATLAB/SIMULINK platform for simulation of CANDU reactor control system

    International Nuclear Information System (INIS)

    Javidnia, H.; Jiang, J.

    2007-01-01

    In this paper a simulation platform for CANDU reactors' control system is presented. The platform is built on MATLAB/SIMULINK interactive graphical interface. Since MATLAB/SIMULINK are powerful tools to describe systems mathematically, all the subsystems in a CANDU reactor are represented in MATLAB's language and are implemented in SIMULINK graphical representation. The focus of the paper is on the flux control loop of CANDU reactors. However, the ideas can be extended to include other parts in CANDU power plants and the same technique can be applied to other types of nuclear reactors and their control systems. The CANDU reactor model and xenon feedback model are also discussed in this paper. (author)

  7. Changing patient population in Dhaka Hospital and Matlab Hospital of icddr,b.

    Science.gov (United States)

    Das, S K; Rahman, A; Chisti, M J; Ahmed, S; Malek, M A; Salam, M A; Bardhan, P K; Faruque, A S G

    2014-02-01

    The Diarrhoeal Disease Surveillance System of icddr,b noted increasing number of patients ≥60 years at urban Dhaka and rural Matlab from 2001 to 2012. Shigella and Vibrio cholerae were more frequently isolated from elderly people than children under 5 years and adults aged 5-59 in both areas. The resistance observed to various drugs of Shigella in Dhaka and Matlab was trimethoprim-sulphamethoxazole (72-63%), ampicillin (43-55%), nalidixic acid (58-61%), mecillinam (12-9%), azithromycin (13-0%), ciprofloxacin (11-13%) and ceftriaxone (11-0%). Vibrio cholerae isolated in Dhaka and Matlab was resistant to trimethoprim-sulphamethoxazole (98-94%), furazolidone (100%), erythromycin (71-53%), tetracycline (46-44%), ciprofloxacin (3-10%) and azithromycin (3-0%). © 2013 John Wiley & Sons Ltd.

  8. Integration of MATLAB Simulink(Registered Trademark) Models with the Vertical Motion Simulator

    Science.gov (United States)

    Lewis, Emily K.; Vuong, Nghia D.

    2012-01-01

    This paper describes the integration of MATLAB Simulink(Registered TradeMark) models into the Vertical Motion Simulator (VMS) at NASA Ames Research Center. The VMS is a high-fidelity, large motion flight simulator that is capable of simulating a variety of aerospace vehicles. Integrating MATLAB Simulink models into the VMS needed to retain the development flexibility of the MATLAB environment and allow rapid deployment of model changes. The process developed at the VMS was used successfully in a number of recent simulation experiments. This accomplishment demonstrated that the model integrity was preserved, while working within the hard real-time run environment of the VMS architecture, and maintaining the unique flexibility of the VMS to meet diverse research requirements.

  9. MATLAB algorithm to implement soil water data assimilation with the Ensemble Kalman Filter using HYDRUS.

    Science.gov (United States)

    Valdes-Abellan, Javier; Pachepsky, Yakov; Martinez, Gonzalo

    2018-01-01

    Data assimilation is becoming a promising technique in hydrologic modelling to update not only model states but also to infer model parameters, specifically to infer soil hydraulic properties in Richard-equation-based soil water models. The Ensemble Kalman Filter method is one of the most widely employed method among the different data assimilation alternatives. In this study the complete Matlab© code used to study soil data assimilation efficiency under different soil and climatic conditions is shown. The code shows the method how data assimilation through EnKF was implemented. Richards equation was solved by the used of Hydrus-1D software which was run from Matlab. •MATLAB routines are released to be used/modified without restrictions for other researchers•Data assimilation Ensemble Kalman Filter method code.•Soil water Richard equation flow solved by Hydrus-1D.

  10. Linking Advanced Visualization and MATLAB for the Analysis of 3D Gene Expression Data

    Energy Technology Data Exchange (ETDEWEB)

    Ruebel, Oliver; Keranen, Soile V.E.; Biggin, Mark; Knowles, David W.; Weber, Gunther H.; Hagen, Hans; Hamann, Bernd; Bethel, E. Wes

    2011-03-30

    Three-dimensional gene expression PointCloud data generated by the Berkeley Drosophila Transcription Network Project (BDTNP) provides quantitative information about the spatial and temporal expression of genes in early Drosophila embryos at cellular resolution. The BDTNP team visualizes and analyzes Point-Cloud data using the software application PointCloudXplore (PCX). To maximize the impact of novel, complex data sets, such as PointClouds, the data needs to be accessible to biologists and comprehensible to developers of analysis functions. We address this challenge by linking PCX and Matlab via a dedicated interface, thereby providing biologists seamless access to advanced data analysis functions and giving bioinformatics researchers the opportunity to integrate their analysis directly into the visualization application. To demonstrate the usefulness of this approach, we computationally model parts of the expression pattern of the gene even skipped using a genetic algorithm implemented in Matlab and integrated into PCX via our Matlab interface.

  11. A platform for dynamic simulation and control of movement based on OpenSim and MATLAB.

    Science.gov (United States)

    Mansouri, Misagh; Reinbolt, Jeffrey A

    2012-05-11

    Numerical simulations play an important role in solving complex engineering problems and have the potential to revolutionize medical decision making and treatment strategies. In this paper, we combine the rapid model-based design, control systems and powerful numerical method strengths of MATLAB/Simulink with the simulation and human movement dynamics strengths of OpenSim by developing a new interface between the two software tools. OpenSim is integrated with Simulink using the MATLAB S-function mechanism, and the interface is demonstrated using both open-loop and closed-loop control systems. While the open-loop system uses MATLAB/Simulink to separately reproduce the OpenSim Forward Dynamics Tool, the closed-loop system adds the unique feature of feedback control to OpenSim, which is necessary for most human movement simulations. An arm model example was successfully used in both open-loop and closed-loop cases. For the open-loop case, the simulation reproduced results from the OpenSim Forward Dynamics Tool with root mean square (RMS) differences of 0.03° for the shoulder elevation angle and 0.06° for the elbow flexion angle. MATLAB's variable step-size integrator reduced the time required to generate the forward dynamic simulation from 7.1s (OpenSim) to 2.9s (MATLAB). For the closed-loop case, a proportional-integral-derivative controller was used to successfully balance a pole on model's hand despite random force disturbances on the pole. The new interface presented here not only integrates the OpenSim and MATLAB/Simulink software tools, but also will allow neuroscientists, physiologists, biomechanists, and physical therapists to adapt and generate new solutions as treatments for musculoskeletal conditions. Copyright © 2012 Elsevier Ltd. All rights reserved.

  12. Integración del brazo robot IRB120 en entorno ROS-MATLAB

    OpenAIRE

    Gómez Cuadrado, José Manuel

    2017-01-01

    Este proyecto usa el entorno ROS (Robot Operating System) para desarrollar el control del brazo robot IRB 120 y su implementación en el entorno de trabajo MATLAB. Se explicará la creación del modelo del robot, la planificación de trayectorias y la comunicación con dicho robot. This project uses the ROS (Robot Operating System) environment for developing the control of the IRB 120 robotic arm and its implementation in the MATLAB working environment. It will explain the creation of the...

  13. Analysis of the MPEG-1 Layer III (MP3) Algorithm using MATLAB

    CERN Document Server

    Thiagarajan, Jayaraman

    2011-01-01

    The MPEG-1 Layer III (MP3) algorithm is one of the most successful audio formats for consumer audio storage and for transfer and playback of music on digital audio players. The MP3 compression standard along with the AAC (Advanced Audio Coding) algorithm are associated with the most successful music players of the last decade. This book describes the fundamentals and the MATLAB implementation details of the MP3 algorithm. Several of the tedious processes in MP3 are supported by demonstrations using MATLAB software. The book presents the theoretical concepts and algorithms used in the MP3 stand

  14. Wind Turbine Blockset in Matlab/Simulink. General Overview and Description of the Model

    DEFF Research Database (Denmark)

    Iov, Florin; Hansen, A. D.; Soerensen, P.

    This report presents a new developed Matlab/Simulink Toolbox for wind turbine applications. This toolbox has been developed during the research project ?Simulation Platform to model, optimize and design wind turbines? and it has been used as a general developer tool for other three simulation tools......: Saber, DIgSILENT, HAWC. The report provides first a quick overview over Matlab issues and then explains the structure of the developed toolbox. The attention in the report is mainly drawn to the description of the most important mathematical models, which have been developed in the Toolbox. Then, some...

  15. A MATLAB toolbox for the analysis of articulatory data in the production of speech.

    Science.gov (United States)

    Nguyen, N

    2000-08-01

    The goal of this paper is to present EMATOOLS, a set of scripts for displaying and annotating acoustic and articulatory data simultaneously in studies on speech production. These scripts were developed with the use of MATLAB, a multiplatform computing environment for numeric computation and visualization. The system is equipped with a mouse-driven graphical interface made up of a number of displays. This interface can be easily customized to speed up routine tasks. The scripts can also be used in a noninteractive way, as stand-alone MATLAB commands. Output data can be imported into any standard spreadsheet. EMATOOLS is freely available from www.lpl.univ-aix.fr/nguyen/ematools.html.

  16. Elementary mathematical and computational tools for electrical and computer engineers using Matlab

    CERN Document Server

    Manassah, Jamal T

    2013-01-01

    Ideal for use as a short-course textbook and for self-study Elementary Mathematical and Computational Tools for Electrical and Computer Engineers Using MATLAB fills that gap. Accessible after just one semester of calculus, it introduces the many practical analytical and numerical tools that are essential to success both in future studies and in professional life. Sharply focused on the needs of the electrical and computer engineering communities, the text provides a wealth of relevant exercises and design problems. Changes in MATLAB's version 6.0 are included in a special addendum.

  17. Design of PR current control with selective harmonic compensators using Matlab

    Directory of Open Access Journals (Sweden)

    Daniel Zammit

    2017-12-01

    Full Text Available This paper presents a procedure to design a Proportional Resonant (PR current controller with additional PR selective harmonic compensators for Grid Connected Photovoltaic (PV Inverters. The design of the PR current control and the harmonic compensators will be carried out using Matlab. Testing was carried out on a 3 kW Grid-Connected PV Inverter which was designed and constructed for this research. Both simulation and experimental results will be presented. Keywords: Inverters, Proportional-resonant controllers, Harmonic compensation, Photovoltaic, Matlab, SISO design tool

  18. Quantification of larval zebrafish motor function in multiwell plates using open-source MATLAB applications.

    Science.gov (United States)

    Zhou, Yangzhong; Cattley, Richard T; Cario, Clinton L; Bai, Qing; Burton, Edward A

    2014-07-01

    This article describes a method to quantify the movements of larval zebrafish in multiwell plates, using the open-source MATLAB applications LSRtrack and LSRanalyze. The protocol comprises four stages: generation of high-quality, flatly illuminated video recordings with exposure settings that facilitate object recognition; analysis of the resulting recordings using tools provided in LSRtrack to optimize tracking accuracy and motion detection; analysis of tracking data using LSRanalyze or custom MATLAB scripts; and implementation of validation controls. The method is reliable, automated and flexible, requires plate format suitable for high-throughput applications.

  19. The NNSYSID Toolbox - A MATLAB Toolbox for System Identification with Neural Networks

    DEFF Research Database (Denmark)

    Nørgård, Peter Magnus; Ravn, Ole; Hansen, Lars Kai

    1996-01-01

    To assist the identification of nonlinear dynamic systems, a set of tools has been developed for the MATLAB(R) environment. The tools include a number of different model structures, highly effective training algorithms, functions for validating trained networks, and pruning algorithms for determi......To assist the identification of nonlinear dynamic systems, a set of tools has been developed for the MATLAB(R) environment. The tools include a number of different model structures, highly effective training algorithms, functions for validating trained networks, and pruning algorithms...

  20. A Simulation Platform To Model, Optimize And Design Wind Turbines. The Matlab/Simulink Toolbox

    Directory of Open Access Journals (Sweden)

    Anca Daniela HANSEN

    2002-12-01

    Full Text Available In the last years Matlab / Simulink® has become the most used software for modeling and simulation of dynamic systems. Wind energy conversion systems are for example such systems, containing subsystems with different ranges of the time constants: wind, turbine, generator, power electronics, transformer and grid. The electrical generator and the power converter need the smallest simulation step and therefore, these blocks decide the simulation speed. This paper presents a new and integrated simulation platform for modeling, optimizing and designing wind turbines. The platform contains different simulation tools: Matlab / Simulink - used as basic modeling tool, HAWC, DIgSilent and Saber.

  1. Simulation, design and thermal analysis of a solar Stirling engine using MATLAB

    International Nuclear Information System (INIS)

    Shazly, J.H.; Hafez, A.Z.; El Shenawy, E.T.; Eteiba, M.B.

    2014-01-01

    Highlights: • Modeling and simulation for a prototype of the solar-powered Stirling engine. • The solar-powered Stirling engine working at the low temperature range. • Estimating output power from the solar Stirling engine using Matlab program. • Solar radiation simulation program presents a solar radiation data using MATLAB. - Abstract: This paper presents the modeling and simulation for a prototype of the solar-powered Stirling engine working at the low temperature range. A mathematical model for the thermal analysis of the solar-powered low temperature Stirling engine with heat transfer is developed using Matlab program. The model takes into consideration the effect of the absorber temperature on the thermal analysis like as radiation and convection heat transfer between the absorber and the working fluid as well as radiation and convection heat transfer between the lower temperature plate and the working fluid. Hence, the present analysis provides a theoretical guidance for designing and operating of the solar-powered low temperature Stirling engine system, as well as estimating output power from the solar Stirling engine using Matlab program. This study attempts to demonstrate the potential of the low temperature Stirling engine as an option for the prime movers for Photovoltaic tracking systems. The heat source temperature is 40–60 °C as the temperature available from the sun directly

  2. Mehrkörpersimulation eines ebenen Koppelgetriebes mittels Matlab / ADAMS -Co-Simulation

    OpenAIRE

    Gollee, Christian; Troll, Clemens

    2017-01-01

    Mit Hilfe der Matlab/ADAMS-Co-Simulation wird ein ebenes Koppelgetriebe (5- Gelenk) untersucht und anschließend die Wirkpaarung mit einem Stückgut betrachtet. Dabei werden verschiedene Modellierungsstufen angewendet und die Simulationsergebnisse Messergebnissen vom Versuchsstand gegenübergestellt. Daneben wird die grundlegende Herangehensweise beim Einsatz dieser Simulationswerkzeuge erläutert.

  3. HAM Construction modeling using COMSOL with MatLab Modeling Guide version 1.0.

    NARCIS (Netherlands)

    Schijndel, van A.W.M.

    2006-01-01

    This paper presents a first modeling guide for the modeling and simulation of up to full 3D dynamic Heat, Air & Moisture (HAM) transport of building constructions using COMSOL with Matlab. The modeling scripts are provided at the appendix. Furthermore, all modeling files and results are published at

  4. HAM Construction modeling using COMSOL with MatLab Modeling Guide, version 1.0

    NARCIS (Netherlands)

    Schijndel, van A.W.M.

    2006-01-01

    This paper presents a first modeling guide for the modeling and simulation of up to full 3D dynamic Heat, Air & Moisture (HAM) transport of building constructions using COMSOL with Matlab. The modeling scripts are provided at the appendix. Furthermore, all modeling files and results are published at

  5. Image enhancement using MCNP5 code and MATLAB in neutron radiography

    International Nuclear Information System (INIS)

    Tharwat, Montaser; Mohamed, Nader; Mongy, T.

    2014-01-01

    This work presents a method that can be used to enhance the neutron radiography (NR) image for objects with high scattering materials like hydrogen, carbon and other light materials. This method used Monte Carlo code, MCNP5, to simulate the NR process and get the flux distribution for each pixel of the image and determines the scattered neutron distribution that caused image blur, and then uses MATLAB to subtract this scattered neutron distribution from the initial image to improve its quality. This work was performed before the commissioning of digital NR system in Jan. 2013. The MATLAB enhancement method is quite a good technique in the case of static based film neutron radiography, while in neutron imaging (NI) technique, image enhancement and quantitative measurement were efficient by using ImageJ software. The enhanced image quality and quantitative measurements were presented in this work. - Highlights: • This work is applicable for static based film neutron radiography and digital neutron imaging. • MATLAB is a useful tool for imaging enhancement in radiographic film. • Advanced imaging processing is available in the ETRR-2 for imaging processing and data extraction. • The digital imaging system is suitable for complex shapes and sizes, while MATLAB technique is suitable for simple shapes and sizes. • Quantitative measurements are available

  6. Detecting variability in MATLAB/Simulink models : an industry-inspired technique and its evaluation

    NARCIS (Netherlands)

    Schlie, A.; Wille, D.; Schulze, S.; Cleophas, L.G.W.A.; Schaefer, I.

    2017-01-01

    Model-based languages such as MATLAB/Simulink play an essential role in the model-driven development of software systems. To comply with new requirements, it is common practice to create new variants by copying existing systems and modifying them. Commonly referred to as clone-and-own, severe

  7. Common Exercise X, step 1 using Matlab Reference: A41-T3-NL-05-4

    NARCIS (Netherlands)

    Schijndel, van A.W.M.

    2005-01-01

    This document presents a preliminary solution to Common exercise x. The exercise is solved by writing a mfile in MatLab. Appendix A provides a table with the requested calculations results, with: Orient Orientation Pin calculated internal pressure err Pin error in calculated internal pressure G1

  8. Enhancing Student Writing and Computer Programming with LATEX and MATLAB in Multivariable Calculus

    Science.gov (United States)

    Sullivan, Eric; Melvin, Timothy

    2016-01-01

    Written communication and computer programming are foundational components of an undergraduate degree in the mathematical sciences. All lower-division mathematics courses at our institution are paired with computer-based writing, coding, and problem-solving activities. In multivariable calculus we utilize MATLAB and LATEX to have students explore…

  9. Implementing ADM1 for plant-wide benchmark simulations in Matlab/Simulink

    DEFF Research Database (Denmark)

    Rosen, Christian; Vrecko, Darko; Gernaey, Krist

    2006-01-01

    , in particular if the ADM1 is to be included in dynamic simulations of plant-wide or even integrated systems. In this paper, the experiences gained from a Matlab/Simulink implementation of ADM1 into the extended COST/IWA Benchmark Simulation Model (BSM2) are presented. Aspects related to system stiffness, model...

  10. [Application of the mixed programming with Labview and Matlab in biomedical signal analysis].

    Science.gov (United States)

    Yu, Lu; Zhang, Yongde; Sha, Xianzheng

    2011-01-01

    This paper introduces the method of mixed programming with Labview and Matlab, and applies this method in a pulse wave pre-processing and feature detecting system. The method has been proved suitable, efficient and accurate, which has provided a new kind of approach for biomedical signal analysis.

  11. MBEToolbox: a Matlab toolbox for sequence data analysis in molecular biology and evolution

    Directory of Open Access Journals (Sweden)

    Xia Xuhua

    2005-03-01

    Full Text Available Abstract Background MATLAB is a high-performance language for technical computing, integrating computation, visualization, and programming in an easy-to-use environment. It has been widely used in many areas, such as mathematics and computation, algorithm development, data acquisition, modeling, simulation, and scientific and engineering graphics. However, few functions are freely available in MATLAB to perform the sequence data analyses specifically required for molecular biology and evolution. Results We have developed a MATLAB toolbox, called MBEToolbox, aimed at filling this gap by offering efficient implementations of the most needed functions in molecular biology and evolution. It can be used to manipulate aligned sequences, calculate evolutionary distances, estimate synonymous and nonsynonymous substitution rates, and infer phylogenetic trees. Moreover, it provides an extensible, functional framework for users with more specialized requirements to explore and analyze aligned nucleotide or protein sequences from an evolutionary perspective. The full functions in the toolbox are accessible through the command-line for seasoned MATLAB users. A graphical user interface, that may be especially useful for non-specialist end users, is also provided. Conclusion MBEToolbox is a useful tool that can aid in the exploration, interpretation and visualization of data in molecular biology and evolution. The software is publicly available at http://web.hku.hk/~jamescai/mbetoolbox/ and http://bioinformatics.org/project/?group_id=454.

  12. ORNL ADCP POST-PROCESSING GUIDE AND MATLAB ALGORITHMS FOR MHK SITE FLOW AND TURBULENCE ANALYSIS

    Energy Technology Data Exchange (ETDEWEB)

    Gunawan, Budi [Oak Ridge National Laboratory (ORNL); Neary, Vincent S [ORNL

    2011-09-01

    Standard methods, along with guidance for post-processing the ADCP stationary measurements using MATLAB algorithms that were evaluated and tested by Oak Ridge National Laboratory (ORNL), are presented following an overview of the ADCP operating principles, deployment methods, error sources and recommended protocols for removing and replacing spurious data.

  13. FIT3D toolbox: multiple view geometry and 3D reconstruction for Matlab

    NARCIS (Netherlands)

    Esteban, I.; Dijk, J.; Groen, F.

    2010-01-01

    FIT3D is a Toolbox built for Matlab that aims at unifying and distributing a set of tools that will allow the researcher to obtain a complete 3D model from a set of calibrated images. In this paper we motivate and present the structure of the toolbox in a tutorial and example based approach. Given

  14. A graphical user interface (gui) matlab program Synthetic_Ves For ...

    African Journals Online (AJOL)

    An interactive and robust computer program for 1D forward modeling of Schlumberger Vertical Electrical Sounding (VES) curves for multilayered earth models is presented. The Graphical User Interface (GUI) enabled software, written in MATLAB v.7.12.0.635 (R2011a), accepts user-defined geologic model parameters (i.e. ...

  15. PEMANFAATAN SOFTWARE MATLAB DALAM PEMBELAJARAN METODE NUMERIK POKOK BAHASAN SISTEM PERSAMAAN LINEAR SIMULTAN

    Directory of Open Access Journals (Sweden)

    ani muanalifah

    2016-02-01

    Dalam pembelajaran metode Numerik khususnya pada pokok bahasan Sistem Persamaan Linear Simultan diperlukan perhitungan iterasi dengan menggunakan Komputer.  Software yang digunakan untuk perhitungan Numerik salah satunya adalah MATLAB.  Dengan peman- faatan software ini ternyata sangat membantu pemebelaja- ran metode numerik

  16. Generalized Simulation Model for a Switched-Mode Power Supply Design Course Using MATLAB/SIMULINK

    Science.gov (United States)

    Liao, Wei-Hsin; Wang, Shun-Chung; Liu, Yi-Hua

    2012-01-01

    Switched-mode power supplies (SMPS) are becoming an essential part of many electronic systems as the industry drives toward miniaturization and energy efficiency. However, practical SMPS design courses are seldom offered. In this paper, a generalized MATLAB/SIMULINK modeling technique is first presented. A proposed practical SMPS design course at…

  17. The Relationship between Gender and Students' Attitude and Experience of Using a Mathematical Software Program (MATLAB)

    Science.gov (United States)

    Ocak, Mehmet A.

    2006-01-01

    This correlation study examined the relationship between gender and the students' attitude and prior knowledge of using one of the mathematical software programs (MATLAB). Participants were selected from one community college, one state university and one private college. Students were volunteers from three Calculus I classrooms (one class from…

  18. Identification of the main thermal characteristics of building components using MATLAB

    DEFF Research Database (Denmark)

    Jimenez, M.J.; Madsen, Henrik; Andersen, Klaus Kaae

    2008-01-01

    This paper presents the application of the IDENT Graphical User Interface of MATLAB to estimate the thermal properties of building components from outdoor dynamic testing, imposing appropriate physical constraints and assuming linear and time invariant parametric models. The theory is briefly...

  19. Optimizing dc-resistance of a foil wounded toroidal inductor combining matlab and comsol

    DEFF Research Database (Denmark)

    Schneider, Henrik; Andersen, Thomas; Knott, Arnold

    2013-01-01

    An optimization routine is presented to optimize the shape of a foil winding of a toroid inductor in terms of the DC resistance. MATLAB was used to define the geometry of the foil winding and COMSOL was used to import the geometry and create a 3D finite element model. The initial parameters...

  20. SIPPI: A Matlab toolbox for sampling the solution to inverse problems with complex prior information

    DEFF Research Database (Denmark)

    Hansen, Thomas Mejer; Cordua, Knud Skou; Caroline Looms, Majken

    2013-01-01

    on the solution. The combined states of information (i.e. the solution to the inverse problem) is a probability density function typically referred to as the a posteriori probability density function. We present a generic toolbox for Matlab and Gnu Octave called SIPPI that implements a number of methods...

  1. Small-signal modelling and analysis of switching converters using MATLAB

    NARCIS (Netherlands)

    Duarte, J.L.

    1998-01-01

    A general procedure for the description of power electronic circuit dynamics is proposed, with the intention of control system design and discrete-time system simulation. The approach is especially suited to be used along with computeraided analysis and synthesis software packages such as MATLAB.

  2. Computer Based Learning in an Undergraduate Physics Laboratory: Interfacing and Instrument Control Using Matlab

    Science.gov (United States)

    Sharp, J. S.; Glover, P. M.; Moseley, W.

    2007-01-01

    In this paper we describe the recent changes to the curriculum of the second year practical laboratory course in the School of Physics and Astronomy at the University of Nottingham. In particular, we describe how Matlab has been implemented as a teaching tool and discuss both its pedagogical advantages and disadvantages in teaching undergraduate…

  3. Teaching Tool for a Control Systems Laboratory Using a Quadrotor as a Plant in MATLAB

    Science.gov (United States)

    Khan, Subhan; Jaffery, Mujtaba Hussain; Hanif, Athar; Asif, Muhammad Rizwan

    2017-01-01

    This paper presents a MATLAB-based application to teach the guidance, navigation, and control concepts of a quadrotor to undergraduate students, using a graphical user interface (GUI) and 3-D animations. The Simulink quadrotor model is controlled by a proportional integral derivative controller and a linear quadratic regulator controller. The GUI…

  4. Development of MATLAB software to control data acquisition from a multichannel systems multi-electrode array.

    Science.gov (United States)

    Messier, Erik

    2016-08-01

    A Multichannel Systems (MCS) microelectrode array data acquisition (DAQ) unit is used to collect multichannel electrograms (EGM) from a Langendorff perfused rabbit heart system to study sudden cardiac death (SCD). MCS provides software through which data being processed by the DAQ unit can be displayed and saved, but this software's combined utility with MATLAB is not very effective. MCSs software stores recorded EGM data in a MathCad (MCD) format, which is then converted to a text file format. These text files are very large, and it is therefore very time consuming to import the EGM data into MATLAB for real-time analysis. Therefore, customized MATLAB software was developed to control the acquisition of data from the MCS DAQ unit, and provide specific laboratory accommodations for this study of SCD. The developed DAQ unit control software will be able to accurately: provide real time display of EGM signals; record and save EGM signals in MATLAB in a desired format; and produce real time analysis of the EGM signals; all through an intuitive GUI.

  5. Computer-Aided Teaching Using MATLAB/Simulink for Enhancing an IM Course With Laboratory Tests

    Science.gov (United States)

    Bentounsi, A.; Djeghloud, H.; Benalla, H.; Birem, T.; Amiar, H.

    2011-01-01

    This paper describes an automatic procedure using MATLAB software to plot the circle diagram for two induction motors (IMs), with wound and squirrel-cage rotors, from no-load and blocked-rotor tests. The advantage of this approach is that it avoids the need for a direct load test in predetermining the IM characteristics under reduced power.…

  6. DynaSim: A MATLAB Toolbox for Neural Modeling and Simulation.

    Science.gov (United States)

    Sherfey, Jason S; Soplata, Austin E; Ardid, Salva; Roberts, Erik A; Stanley, David A; Pittman-Polletta, Benjamin R; Kopell, Nancy J

    2018-01-01

    DynaSim is an open-source MATLAB/GNU Octave toolbox for rapid prototyping of neural models and batch simulation management. It is designed to speed up and simplify the process of generating, sharing, and exploring network models of neurons with one or more compartments. Models can be specified by equations directly (similar to XPP or the Brian simulator) or by lists of predefined or custom model components. The higher-level specification supports arbitrarily complex population models and networks of interconnected populations. DynaSim also includes a large set of features that simplify exploring model dynamics over parameter spaces, running simulations in parallel using both multicore processors and high-performance computer clusters, and analyzing and plotting large numbers of simulated data sets in parallel. It also includes a graphical user interface (DynaSim GUI) that supports full functionality without requiring user programming. The software has been implemented in MATLAB to enable advanced neural modeling using MATLAB, given its popularity and a growing interest in modeling neural systems. The design of DynaSim incorporates a novel schema for model specification to facilitate future interoperability with other specifications (e.g., NeuroML, SBML), simulators (e.g., NEURON, Brian, NEST), and web-based applications (e.g., Geppetto) outside MATLAB. DynaSim is freely available at http://dynasimtoolbox.org. This tool promises to reduce barriers for investigating dynamics in large neural models, facilitate collaborative modeling, and complement other tools being developed in the neuroinformatics community.

  7. SIPPI: A Matlab toolbox for sampling the solution to inverse problems with complex prior information

    DEFF Research Database (Denmark)

    Hansen, Thomas Mejer; Cordua, Knud Skou; Looms, Majken Caroline

    2013-01-01

    We present an application of the SIPPI Matlab toolbox, to obtain a sample from the a posteriori probability density function for the classical tomographic inversion problem. We consider a number of different forward models, linear and non-linear, such as ray based forward models that rely...

  8. MATLAB-Based Program for Teaching Autocorrelation Function and Noise Concepts

    Science.gov (United States)

    Jovanovic Dolecek, G.

    2012-01-01

    An attractive MATLAB-based tool for teaching the basics of autocorrelation function and noise concepts is presented in this paper. This tool enhances traditional in-classroom lecturing. The demonstrations of the tool described here highlight the description of the autocorrelation function (ACF) in a general case for wide-sense stationary (WSS)…

  9. ANALYSIS AND SIMULATION OF INDUSTRIAL manipulators K 180 by a software MATLAB

    Directory of Open Access Journals (Sweden)

    Slobodan Stefanović

    2014-07-01

    Full Text Available Robotics is a multidisciplinary branch of science that integrates knowledge from many areas of mechanics, electronics, computer science and automation. Due to the large application in practice often goes in some parts of medicine, art, economics. Further in the presentation we will experimentally demonstrate the application of MATLAB 2010 to create industrial robot KR 80 and movement simulations.

  10. Investigation of Diesel combustion using multiple injection strategies for idling after cold start of passenger-car engines

    Energy Technology Data Exchange (ETDEWEB)

    Payri, F.; Broatch, A.; Salavert, J.M.; Martin, J. [CMT-Motores Termicos, Universidad Politecnica de Valencia, Aptdo. 22012, E-46071 Valencia (Spain)

    2010-10-15

    A comprehensive investigation was carried out in order to better understand the combustion behaviour in a low compression ratio DI Diesel engine when multiple injection strategies are applied just after the engine cold starts in low temperature conditions (idling). More specifically, the aim of this study was twofold: on one hand, to understand the effect of the multiple injection strategies on the indicated mean effective pressure; on the other hand, to contribute to the understanding of combustion stability characterized by the coefficient of variation of indicated mean effective pressure. The first objective was fulfilled by analyzing the rate of heat release obtained by in-cylinder pressure diagnosis. The results showed that the timing of the pilot injection closest to the main injection was the most influential parameter based on the behaviour of the rate of heat release (regardless of the multiple injection strategy applied). For the second objective, the combustion stability was found to be correlated with the combustion centroid angle. The results showed a trend between them and the existence of a range of centroid angles where the combustion stability is strong enough. In addition, it was also evident that convenient split injection allows shifting the centroid to such a zone and improves combustion stability after start. (author)

  11. PERHITUNGAN IDLE CAPACITY DENGAN MENGGUNAKAN CAM-I CAPACITY MODEL DALAM RANGKA EFISIENSI BIAYA PADA PT X

    Directory of Open Access Journals (Sweden)

    Muammar Aditya

    2015-09-01

    Full Text Available Aim for this research are to analyze capacity cost which incure from company production machines and human resources whose operate the production machine using CAM-I capacity model. CAM-I capacity model is an approach which focus  upon how to manage company resources. This research initiated at PT X which focus to production activity that used small mixer machine, extruder machine, oven drying machine, enrober machine, pan coting machine which consist of hot and cold pan coating machine, and packing machine which consist of vertical packing machine and horizontal packing machine as well as human resources that operates those machine. This research focus on rate capacity, productive capacity, idle capacity, and nonproductive capacity to measure capacity cost. Result of this research shows most of the capacity owned by either by production machine or human resources are not utilized to its maximum potential. There are need to reduce capacity cost owned by production machine and human resoures to increase the product sales but if its unachieveable there will be need to increase efficiency from production machine and human resources by reducing their quantityDOI: 10.15408/ess.v4i1.1961

  12. Calibration data Analysis Package (CAP): An IDL based widget application for analysis of X-ray calibration data

    Science.gov (United States)

    Vaishali, S.; Narendranath, S.; Sreekumar, P.

    An IDL (interactive data language) based widget application developed for the calibration of C1XS (Narendranath et al., 2010) instrument on Chandrayaan-1 is modified to provide a generic package for the analysis of data from x-ray detectors. The package supports files in ascii as well as FITS format. Data can be fitted with a list of inbuilt functions to derive the spectral redistribution function (SRF). We have incorporated functions such as `HYPERMET' (Philips & Marlow 1976) including non Gaussian components in the SRF such as low energy tail, low energy shelf and escape peak. In addition users can incorporate additional models which may be required to model detector specific features. Spectral fits use a routine `mpfit' which uses Leven-Marquardt least squares fitting method. The SRF derived from this tool can be fed into an accompanying program to generate a redistribution matrix file (RMF) compatible with the X-ray spectral analysis package XSPEC. The tool provides a user friendly interface of help to beginners and also provides transparency and advanced features for experts.

  13. Three-dimensional rendering of segmented object using matlab - biomed 2010.

    Science.gov (United States)

    Anderson, Jeffrey R; Barrett, Steven F

    2010-01-01

    The three-dimensional rendering of microscopic objects is a difficult and challenging task that often requires specialized image processing techniques. Previous work has been described of a semi-automatic segmentation process of fluorescently stained neurons collected as a sequence of slice images with a confocal laser scanning microscope. Once properly segmented, each individual object can be rendered and studied as a three-dimensional virtual object. This paper describes the work associated with the design and development of Matlab files to create three-dimensional images from the segmented object data previously mentioned. Part of the motivation for this work is to integrate both the segmentation and rendering processes into one software application, providing a seamless transition from the segmentation tasks to the rendering and visualization tasks. Previously these tasks were accomplished on two different computer systems, windows and Linux. This transition basically limits the usefulness of the segmentation and rendering applications to those who have both computer systems readily available. The focus of this work is to create custom Matlab image processing algorithms for object rendering and visualization, and merge these capabilities to the Matlab files that were developed especially for the image segmentation task. The completed Matlab application will contain both the segmentation and rendering processes in a single graphical user interface, or GUI. This process for rendering three-dimensional images in Matlab requires that a sequence of two-dimensional binary images, representing a cross-sectional slice of the object, be reassembled in a 3D space, and covered with a surface. Additional segmented objects can be rendered in the same 3D space. The surface properties of each object can be varied by the user to aid in the study and analysis of the objects. This inter-active process becomes a powerful visual tool to study and understand microscopic objects.

  14. Gene ARMADA: an integrated multi-analysis platform for microarray data implemented in MATLAB.

    Science.gov (United States)

    Chatziioannou, Aristotelis; Moulos, Panagiotis; Kolisis, Fragiskos N

    2009-10-27

    The microarray data analysis realm is ever growing through the development of various tools, open source and commercial. However there is absence of predefined rational algorithmic analysis workflows or batch standardized processing to incorporate all steps, from raw data import up to the derivation of significantly differentially expressed gene lists. This absence obfuscates the analytical procedure and obstructs the massive comparative processing of genomic microarray datasets. Moreover, the solutions provided, heavily depend on the programming skills of the user, whereas in the case of GUI embedded solutions, they do not provide direct support of various raw image analysis formats or a versatile and simultaneously flexible combination of signal processing methods. We describe here Gene ARMADA (Automated Robust MicroArray Data Analysis), a MATLAB implemented platform with a Graphical User Interface. This suite integrates all steps of microarray data analysis including automated data import, noise correction and filtering, normalization, statistical selection of differentially expressed genes, clustering, classification and annotation. In its current version, Gene ARMADA fully supports 2 coloured cDNA and Affymetrix oligonucleotide arrays, plus custom arrays for which experimental details are given in tabular form (Excel spreadsheet, comma separated values, tab-delimited text formats). It also supports the analysis of already processed results through its versatile import editor. Besides being fully automated, Gene ARMADA incorporates numerous functionalities of the Statistics and Bioinformatics Toolboxes of MATLAB. In addition, it provides numerous visualization and exploration tools plus customizable export data formats for seamless integration by other analysis tools or MATLAB, for further processing. Gene ARMADA requires MATLAB 7.4 (R2007a) or higher and is also distributed as a stand-alone application with MATLAB Component Runtime. Gene ARMADA provides a

  15. An Introduction to Transient Engine Applications Using the Numerical Propulsion System Simulation (NPSS) and MATLAB

    Science.gov (United States)

    Chin, Jeffrey C.; Csank, Jeffrey T.; Haller, William J.; Seidel, Jonathan A.

    2016-01-01

    This document outlines methodologies designed to improve the interface between the Numerical Propulsion System Simulation framework and various control and dynamic analyses developed in the Matlab and Simulink environment. Although NPSS is most commonly used for steady-state modeling, this paper is intended to supplement the relatively sparse documentation on it's transient analysis functionality. Matlab has become an extremely popular engineering environment, and better methodologies are necessary to develop tools that leverage the benefits of these disparate frameworks. Transient analysis is not a new feature of the Numerical Propulsion System Simulation (NPSS), but transient considerations are becoming more pertinent as multidisciplinary trade-offs begin to play a larger role in advanced engine designs. This paper serves to supplement the relatively sparse documentation on transient modeling and cover the budding convergence between NPSS and Matlab based modeling toolsets. The following sections explore various design patterns to rapidly develop transient models. Each approach starts with a base model built with NPSS, and assumes the reader already has a basic understanding of how to construct a steady-state model. The second half of the paper focuses on further enhancements required to subsequently interface NPSS with Matlab codes. The first method being the simplest and most straightforward but performance constrained, and the last being the most abstract. These methods aren't mutually exclusive and the specific implementation details could vary greatly based on the designer's discretion. Basic recommendations are provided to organize model logic in a format most easily amenable to integration with existing Matlab control toolsets.

  16. Automatic analysis of intrinsic positional verification films brachytherapy using MATLAB; Analisis automatico de peliculas de verificacion posicional intrinsica en braqueterapia mediante MATLAB

    Energy Technology Data Exchange (ETDEWEB)

    Quiros Higueras, J. D.; Marco Blancas, N. de; Ruiz Rodriguez, J. C.

    2011-07-01

    One of the essential tests in quality control of brachytherapy equipment is verification auto load intrinsic positional radioactive source. A classic method for evaluation is the use of x-ray film and measuring the distance between the marks left by autoradiography of the source with respect to a reference. In our center has developed an automated method of measurement by the radiochromic film scanning and implementation of a macro developed in Matlab, in order to optimize time and reduce uncertainty in the measurement. The purpose of this paper is to describe the method developed, assess their uncertainty and quantify their advantages over the manual method. (Author)

  17. A multi-site analysis of the association between black carbon concentrations and vehicular idling, traffic, background pollution, and meteorology during school dismissals.

    Science.gov (United States)

    Richmond-Bryant, J; Bukiewicz, L; Kalin, R; Galarraga, C; Mirer, F

    2011-05-01

    A study was performed to assess the relationship between black carbon (BC), passing traffic, and vehicular idling outside New York City (NYC) schools during student dismissal. Monitoring was performed at three school sites in East Harlem, the Bronx, and Brooklyn for 1month per year over a two-year period from November 2006-October 2008. Monitoring at each site was conducted before and after the Asthma Free School Zone (AFSZ) asthma reduction education program was administered. Real-time equipment with a one-minute averaging interval was used to obtain the BC data, while volume counts of idling and passing school busses, trucks, and automobiles were collected each minute by study staff. These data were matched to ambient PM(2.5) and meteorology data obtained from the New York State Department of Environmental Conservation. A generalized additive model (GAM) model was run to examine the relationship between BC concentration and each variable while accounting for site-to-site differences. F-tests were employed to assess the significance of each of the predictor variables. The model results suggested that variability in ambient PM(2.5) concentration contributed 24% of the variability in transformed BC concentration, while variability in the number of idling busses and trucks on the street during dismissal contributed 20% of the variability in transformed BC concentration. The results of this study suggest that a combination of urban scale and local traffic control approaches in combination with cessation of school bus idling will produce improved local BC concentration outside schools. Published by Elsevier B.V.

  18. Discrete sliding mode control for engine idle speed%离散滑模控制在发动机怠速设计中的应用

    Institute of Scientific and Technical Information of China (English)

    郭兴进; 刘珺

    2009-01-01

    A novel discrete sliding mode(DSM)controller is designed. Engine idle speed can be controlled by a nonlinear model for the idle speed control(ISC)system of a 4-cylinder, 4-1itre engine. The experimental results show that DSM control system has superior performance on tracking the desired idle speed and rejecting the system disturbances when compared with the existing controller.%利用一种新的离散滑模控制方法, 设计了发动机怠速的离散滑模(DSM)控制器, 用已开发出的4缸、1.4L的AJR发动机怠速控制系统的非线性模型进行发动机怠速转速的控制. 实验结果表明, 与原机的控制器相比较而言, DSM控制器在跟踪期望怠速转速及抗干扰等方面具有优良的性能.

  19. Parallel Performance of Pure MATLAB "M-files" versus "C-code" as Applied to Formation of Wide-Bandwidth and Wide-Beamwidth SAR Imagery

    National Research Council Canada - National Science Library

    Nehrbass, John

    2003-01-01

    .... For scientists in the area of Signal and Image processing, MATLAB is often the tool of choice. MATLAB allows extremely rapid prototyping and debugging of complicated studies with a minimal of computer science expertise...

  20. Augmented ingestion of carbon monoxide and sulfur oxides by occupants of vehicles while idling in drive-up facility lines

    Energy Technology Data Exchange (ETDEWEB)

    Myronuk, D J

    1977-02-01

    For a line-up of automobiles waiting for a period of time at a drive-up facility, the idling engine emissions are expelled in a rearward direction and tend to envelope the vehicles at the end portion of the queue. Factors that affect these highly localized pollutant accumulation episodes include local meteorological conditions, number, age and tune-up condition of the cars, exhaust pipe location, interior air handling equipment, vehicle separation distances and natural or artificial barriers that form troughs in which vehicular emissions can accumulate or be trapped. In a series of typical vehicle line-ups, local CO concentrations were measured. With Santa Clara Valley background levels of 2 to 5 ppm, the 15 min average driver-area concentration levels ranged from 15 ppm to 95 ppm with short term peaks between 100 and 1000 ppm. The exposure of humans to these concentrations of CO can result in mild headache or nausea, failure to react quickly to stimuli (like oncoming traffic) as well as setting a strain on the heart and lungs. These effects are temporary and reversible. A far more serious local air quality and health problem arises in the growing production of SO/sub x/ and sulfate compounds attributable to the legislated use of oxidizing catalytic mufflers for new car emission control and oxidation of the elemental S found in all gasoline. Using the CO levels as indicators of the accumulation of local automobile produced pollutants, when a majority of cars are equipped with catalytic converters, the anticipated adverse effects of SO/sub x/ concentrations, irritation and inflammation of healthy lung tissue of young and old people alike, as well as aggrevation of preexisting conditions of lung or heart impairment, will be a most undesirable feature of drive-up facility services. Potential reductions in the extent of this developing problem include S removal, SO/sub x/ traps and exhaust system redesign.

  1. Gaseous and Particulate Emissions from Diesel Engines at Idle and under Load: Comparison of Biodiesel Blend and Ultralow Sulfur Diesel Fuels.

    Science.gov (United States)

    Chin, Jo-Yu; Batterman, Stuart A; Northrop, William F; Bohac, Stanislav V; Assanis, Dennis N

    2012-11-15

    Diesel exhaust emissions have been reported for a number of engine operating strategies, after-treatment technologies, and fuels. However, information is limited regarding emissions of many pollutants during idling and when biodiesel fuels are used. This study investigates regulated and unregulated emissions from both light-duty passenger car (1.7 L) and medium-duty (6.4 L) diesel engines at idle and load and compares a biodiesel blend (B20) to conventional ultralow sulfur diesel (ULSD) fuel. Exhaust aftertreatment devices included a diesel oxidation catalyst (DOC) and a diesel particle filter (DPF). For the 1.7 L engine under load without a DOC, B20 reduced brake-specific emissions of particulate matter (PM), elemental carbon (EC), nonmethane hydrocarbons (NMHCs), and most volatile organic compounds (VOCs) compared to ULSD; however, formaldehyde brake-specific emissions increased. With a DOC and high load, B20 increased brake-specific emissions of NMHC, nitrogen oxides (NO x ), formaldehyde, naphthalene, and several other VOCs. For the 6.4 L engine under load, B20 reduced brake-specific emissions of PM 2.5 , EC, formaldehyde, and most VOCs; however, NO x brake-specific emissions increased. When idling, the effects of fuel type were different: B20 increased NMHC, PM 2.5 , EC, formaldehyde, benzene, and other VOC emission rates from both engines, and changes were sometimes large, e.g., PM 2.5 increased by 60% for the 6.4 L/2004 calibration engine, and benzene by 40% for the 1.7 L engine with the DOC, possibly reflecting incomplete combustion and unburned fuel. Diesel exhaust emissions depended on the fuel type and engine load (idle versus loaded). The higher emissions found when using B20 are especially important given the recent attention to exposures from idling vehicles and the health significance of PM 2.5 . The emission profiles demonstrate the effects of fuel type, engine calibration, and emission control system, and they can be used as source profiles for

  2. Gaseous and Particulate Emissions from Diesel Engines at Idle and under Load: Comparison of Biodiesel Blend and Ultralow Sulfur Diesel Fuels

    Science.gov (United States)

    Chin, Jo-Yu; Batterman, Stuart A.; Northrop, William F.; Bohac, Stanislav V.; Assanis, Dennis N.

    2015-01-01

    Diesel exhaust emissions have been reported for a number of engine operating strategies, after-treatment technologies, and fuels. However, information is limited regarding emissions of many pollutants during idling and when biodiesel fuels are used. This study investigates regulated and unregulated emissions from both light-duty passenger car (1.7 L) and medium-duty (6.4 L) diesel engines at idle and load and compares a biodiesel blend (B20) to conventional ultralow sulfur diesel (ULSD) fuel. Exhaust aftertreatment devices included a diesel oxidation catalyst (DOC) and a diesel particle filter (DPF). For the 1.7 L engine under load without a DOC, B20 reduced brake-specific emissions of particulate matter (PM), elemental carbon (EC), nonmethane hydrocarbons (NMHCs), and most volatile organic compounds (VOCs) compared to ULSD; however, formaldehyde brake-specific emissions increased. With a DOC and high load, B20 increased brake-specific emissions of NMHC, nitrogen oxides (NOx), formaldehyde, naphthalene, and several other VOCs. For the 6.4 L engine under load, B20 reduced brake-specific emissions of PM2.5, EC, formaldehyde, and most VOCs; however, NOx brake-specific emissions increased. When idling, the effects of fuel type were different: B20 increased NMHC, PM2.5, EC, formaldehyde, benzene, and other VOC emission rates from both engines, and changes were sometimes large, e.g., PM2.5 increased by 60% for the 6.4 L/2004 calibration engine, and benzene by 40% for the 1.7 L engine with the DOC, possibly reflecting incomplete combustion and unburned fuel. Diesel exhaust emissions depended on the fuel type and engine load (idle versus loaded). The higher emissions found when using B20 are especially important given the recent attention to exposures from idling vehicles and the health significance of PM2.5. The emission profiles demonstrate the effects of fuel type, engine calibration, and emission control system, and they can be used as source profiles for apportionment

  3. Optimization of Grillages Using Genetic Algorithms for Integrating Matlab and Fortran Environments

    Directory of Open Access Journals (Sweden)

    Darius Mačiūnas

    2012-12-01

    Full Text Available The purpose of the paper is to present technology applied for the global optimization of grillage-type pile foundations (further grillages. The goal of optimization is to obtain the optimal layout of pile placement in the grillages. The problem can be categorized as a topology optimization problem. The objective function is comprised of maximum reactive force emerging in a pile. The reactive force is minimized during the procedure of optimization during which variables enclose the positions of piles beneath connecting beams. Reactive forces in all piles are computed utilizing an original algorithm implemented in the Fortran programming language. The algorithm is integrated into the MatLab environment where the optimization procedure is executed utilizing a genetic algorithm. The article also describes technology enabling the integration of MatLab and Fortran environments. The authors seek to evaluate the quality of a solution to the problem analyzing experimental results obtained applying the proposed technology.

  4. Optics learning by computing, with examples using Maple, MathCad, Mathematica, and MATLAB

    CERN Document Server

    Moeller, Karl Dieter

    2007-01-01

    This new edition is intended for a one semester course in optics for juniors and seniors in science and engineering; it uses scripts from Maple, MathCad, Mathematica, and MATLAB provide a simulated laboratory where students can learn by exploration and discovery instead of passive absorption. The text covers all the standard topics of a traditional optics course, including: geometrical optics and aberration, interference and diffraction, coherence, Maxwell's equations, wave guides and propagating modes, blackbody radiation, atomic emission and lasers, optical properties of materials, Fourier transforms and FT spectroscopy, image formation, and holography. It contains step by step derivations of all basic formulas in geometrical, wave and Fourier optics. The basic text is supplemented by over 170 files in Maple, MathCad, Mathematica, and MATLAB (many of which are in the text, each suggesting programs to solve a particular problem, and each linked to a topic in or application of optics. The computer files are d...

  5. Desarrollo de una interfaz para el control del robot IRB desde Matlab

    OpenAIRE

    Gutiérrez Corbacho, Azahara

    2014-01-01

    El objetivo de este proyecto es realizar la comunicación con el brazo robótico, IRB120 de ABB, a través de la herramienta de software matemático Matlab. Para ello desarrollaremos un socket de comunicación, que se encargará enviar y procesar los datos. Para comprobar que la comunicación funciona y que el envío de datos se realiza correctamente, se implementarán en Matlab, una serie de interfaces de comunicación con el robot y una aplicación final. La primera, será una interfaz gráfica r...

  6. Problem-based learning in communication systems using MATLAB and Simulink

    CERN Document Server

    Choi, Kwonhue

    2016-01-01

    Designed to help teach and understand communication systems using a classroom-tested, active learning approach. This book covers the basic concepts of signals, and analog and digital communications, to more complex simulations in communication systems. Problem-Based Learning in Communication Systems Using MATLAB and Simulink begins by introducing MATLAB and Simulink to prepare readers who are unfamiliar with these environments in order to tackle projects and exercises included in this book. Discussions on simulation of signals, filter design, sampling and reconstruction, and analog communications are covered next. The book concludes by covering advanced topics such as Viterbi decoding, OFDM and MIMO. In addition, this book contains examples of how to convert waveforms, constructed in simulation, into electric signals. It also includes problems illustrating how to complete actual wireless communications in the band near ultrasonic frequencies. A content-m pping table is included in this book to help instruc...

  7. Wind Turbine Blockset in Matlab/Simulink - General overview and description of the models

    Energy Technology Data Exchange (ETDEWEB)

    Iov, F.; Hansen, A.D.; Soerensen, P.; Blaabjerg, F.

    2004-03-01

    This report presents a new developed Matlab/Simulink Toolbox for wind turbine applications. This toolbox has been developed during the research project 'Simulation Platform to model, optimize and design wind turbines' and it has been used as a general developer tool for other three simulation tools: Saber, DIgSILENT, HAWC. The report provides first a quick overview over Matlab issues and then explains the structure of the developed toolbox. The attention in the report is mainly drawn to the description of the most important mathematical models, which have been developed in the Toolbox. Then, some simulation results using the developed models are shown. Finally, some general conclusions regarding this new developed Toolbox as well as some directions for future work are made. (au)

  8. STOCHSIMGPU: parallel stochastic simulation for the Systems Biology Toolbox 2 for MATLAB

    KAUST Repository

    Klingbeil, G.

    2011-02-25

    Motivation: The importance of stochasticity in biological systems is becoming increasingly recognized and the computational cost of biologically realistic stochastic simulations urgently requires development of efficient software. We present a new software tool STOCHSIMGPU that exploits graphics processing units (GPUs) for parallel stochastic simulations of biological/chemical reaction systems and show that significant gains in efficiency can be made. It is integrated into MATLAB and works with the Systems Biology Toolbox 2 (SBTOOLBOX2) for MATLAB. Results: The GPU-based parallel implementation of the Gillespie stochastic simulation algorithm (SSA), the logarithmic direct method (LDM) and the next reaction method (NRM) is approximately 85 times faster than the sequential implementation of the NRM on a central processing unit (CPU). Using our software does not require any changes to the user\\'s models, since it acts as a direct replacement of the stochastic simulation software of the SBTOOLBOX2. © The Author 2011. Published by Oxford University Press. All rights reserved.

  9. OXSA: An open-source magnetic resonance spectroscopy analysis toolbox in MATLAB.

    Directory of Open Access Journals (Sweden)

    Lucian A B Purvis

    Full Text Available In vivo magnetic resonance spectroscopy provides insight into metabolism in the human body. New acquisition protocols are often proposed to improve the quality or efficiency of data collection. Processing pipelines must also be developed to use these data optimally. Current fitting software is either targeted at general spectroscopy fitting, or for specific protocols. We therefore introduce the MATLAB-based OXford Spectroscopy Analysis (OXSA toolbox to allow researchers to rapidly develop their own customised processing pipelines. The toolbox aims to simplify development by: being easy to install and use; seamlessly importing Siemens Digital Imaging and Communications in Medicine (DICOM standard data; allowing visualisation of spectroscopy data; offering a robust fitting routine; flexibly specifying prior knowledge when fitting; and allowing batch processing of spectra. This article demonstrates how each of these criteria have been fulfilled, and gives technical details about the implementation in MATLAB. The code is freely available to download from https://github.com/oxsatoolbox/oxsa.

  10. Optimization of Grillages Using Genetic Algorithms for Integrating Matlab and Fortran Environments

    Directory of Open Access Journals (Sweden)

    Darius Mačiūnas

    2013-02-01

    Full Text Available The purpose of the paper is to present technology applied for the global optimization of grillage-type pile foundations (further grillages. The goal of optimization is to obtain the optimal layout of pile placement in the grillages. The problem can be categorized as a topology optimization problem. The objective function is comprised of maximum reactive force emerging in a pile. The reactive force is minimized during the procedure of optimization during which variables enclose the positions of piles beneath connecting beams. Reactive forces in all piles are computed utilizing an original algorithm implemented in the Fortran programming language. The algorithm is integrated into the MatLab environment where the optimization procedure is executed utilizing a genetic algorithm. The article also describes technology enabling the integration of MatLab and Fortran environments. The authors seek to evaluate the quality of a solution to the problem analyzing experimental results obtained applying the proposed technology.

  11. MATLAB for laser speckle contrast analysis (LASCA): a practice-based approach

    Science.gov (United States)

    Postnikov, Eugene B.; Tsoy, Maria O.; Postnov, Dmitry E.

    2018-04-01

    Laser Speckle Contrast Analysis (LASCA) is one of the most powerful modern methods for revealing blood dynamics. The experimental design and theory for this method are well established, and the computational recipie is often regarded to be trivial. However, the achieved performance and spatial resolution may considerable differ for different implementations. We comprise a minireview of known approaches to the spatial laser speckle contrast data processing and their realization in MATLAB code providing an explicit correspondence to the mathematical representation, a discussion of available implementations. We also present the algorithm based on the 2D Haar wavelet transform, also supplied with the program code. This new method provides an opportunity to introduce horizontal, vertical and diagonal speckle contrasts; it may be used for processing highly anisotropic images of vascular trees. We provide the comparative analysis of the accuracy of vascular pattern detection and the processing times with a special attention to details of the used MATLAB procedures.

  12. A computerized glow curve analysis (GCA) method for WinREMS thermoluminescent dosimeter data using MATLAB

    International Nuclear Information System (INIS)

    Harvey, John A.; Rodrigues, Miesher L.; Kearfott, Kimberlee J.

    2011-01-01

    A computerized glow curve analysis (GCA) program for handling of thermoluminescence data originating from WinREMS is presented. The MATLAB program fits the glow peaks using the first-order kinetics model. Tested materials are LiF:Mg,Ti, CaF 2 :Dy, CaF 2 :Tm, CaF 2 :Mn, LiF:Mg,Cu,P, and CaSO 4 :Dy, with most having an average figure of merit (FOM) of 1.3% or less, with CaSO 4 :Dy 2.2% or less. Output is a list of fit parameters, peak areas, and graphs for each fit, evaluating each glow curve in 1.5 s or less. - Highlights: → Robust algorithm for performing thermoluminescent dosimeter glow curve analysis. → Written in MATLAB so readily implemented on variety of computers. → Usage of figure of merit demonstrated for six different materials.

  13. Numerical methods in finance and economics a MATLAB-based introduction

    CERN Document Server

    Brandimarte, Paolo

    2006-01-01

    A state-of-the-art introduction to the powerful mathematical and statistical tools used in the field of financeThe use of mathematical models and numerical techniques is a practice employed by a growing number of applied mathematicians working on applications in finance. Reflecting this development, Numerical Methods in Finance and Economics: A MATLAB?-Based Introduction, Second Edition bridges the gap between financial theory and computational practice while showing readers how to utilize MATLAB?--the powerful numerical computing environment--for financial applications.The author provides an essential foundation in finance and numerical analysis in addition to background material for students from both engineering and economics perspectives. A wide range of topics is covered, including standard numerical analysis methods, Monte Carlo methods to simulate systems affected by significant uncertainty, and optimization methods to find an optimal set of decisions.Among this book''s most outstanding features is the...

  14. Radial basis function (RBF) neural network control for mechanical systems design, analysis and Matlab simulation

    CERN Document Server

    Liu, Jinkun

    2013-01-01

    Radial Basis Function (RBF) Neural Network Control for Mechanical Systems is motivated by the need for systematic design approaches to stable adaptive control system design using neural network approximation-based techniques. The main objectives of the book are to introduce the concrete design methods and MATLAB simulation of stable adaptive RBF neural control strategies. In this book, a broad range of implementable neural network control design methods for mechanical systems are presented, such as robot manipulators, inverted pendulums, single link flexible joint robots, motors, etc. Advanced neural network controller design methods and their stability analysis are explored. The book provides readers with the fundamentals of neural network control system design.   This book is intended for the researchers in the fields of neural adaptive control, mechanical systems, Matlab simulation, engineering design, robotics and automation. Jinkun Liu is a professor at Beijing University of Aeronautics and Astronauti...

  15. The Application of PSIM & Matlab/ Simulink in Teaching of Power Electronics Courses

    Directory of Open Access Journals (Sweden)

    Sameer Hanna Khader

    2011-07-01

    Full Text Available This paper presents a comparison analysis between two engineering software platforms, Matlab/Simulink & PSIM, which are used as major educational tools in teaching of power electronics and electrical drive courses, in additional to conducted research in these fields. The comparison analysis is based on studying the design simplicity of the module, time consumed in building of the module, accuracy, functionality, simulation time, and the acceptability of obtained results. Various power electronic simulation circuits are illustrated and the results are processed and displayed. The simulation results states that Matlab/Simulink is a suitable platform for control and regulation of simulation processes, in additional to its dominant role in conducting research tasks. Conversely, PSIM is dedicated to power electronic circuits and machine simulation tasks with fast and robust algorithms and suitable for educational purposes. It is recommended that both packages can be used in teaching power electronics courses.

  16. Using MATLAB software with Tomcat server and Java platform for remote image analysis in pathology.

    Science.gov (United States)

    Markiewicz, Tomasz

    2011-03-30

    The Matlab software is a one of the most advanced development tool for application in engineering practice. From our point of view the most important is the image processing toolbox, offering many built-in functions, including mathematical morphology, and implementation of a many artificial neural networks as AI. It is very popular platform for creation of the specialized program for image analysis, also in pathology. Based on the latest version of Matlab Builder Java toolbox, it is possible to create the software, serving as a remote system for image analysis in pathology via internet communication. The internet platform can be realized based on Java Servlet Pages with Tomcat server as servlet container. In presented software implementation we propose remote image analysis realized by Matlab algorithms. These algorithms can be compiled to executable jar file with the help of Matlab Builder Java toolbox. The Matlab function must be declared with the set of input data, output structure with numerical results and Matlab web figure. Any function prepared in that manner can be used as a Java function in Java Servlet Pages (JSP). The graphical user interface providing the input data and displaying the results (also in graphical form) must be implemented in JSP. Additionally the data storage to database can be implemented within algorithm written in Matlab with the help of Matlab Database Toolbox directly with the image processing. The complete JSP page can be run by Tomcat server. The proposed tool for remote image analysis was tested on the Computerized Analysis of Medical Images (CAMI) software developed by author. The user provides image and case information (diagnosis, staining, image parameter etc.). When analysis is initialized, input data with image are sent to servlet on Tomcat. When analysis is done, client obtains the graphical results as an image with marked recognized cells and also the quantitative output. Additionally, the results are stored in a server

  17. Image enhancement using MCNP5 code and MATLAB in neutron radiography.

    Science.gov (United States)

    Tharwat, Montaser; Mohamed, Nader; Mongy, T

    2014-07-01

    This work presents a method that can be used to enhance the neutron radiography (NR) image for objects with high scattering materials like hydrogen, carbon and other light materials. This method used Monte Carlo code, MCNP5, to simulate the NR process and get the flux distribution for each pixel of the image and determines the scattered neutron distribution that caused image blur, and then uses MATLAB to subtract this scattered neutron distribution from the initial image to improve its quality. This work was performed before the commissioning of digital NR system in Jan. 2013. The MATLAB enhancement method is quite a good technique in the case of static based film neutron radiography, while in neutron imaging (NI) technique, image enhancement and quantitative measurement were efficient by using ImageJ software. The enhanced image quality and quantitative measurements were presented in this work. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. RenderToolbox3: MATLAB tools that facilitate physically based stimulus rendering for vision research.

    Science.gov (United States)

    Heasly, Benjamin S; Cottaris, Nicolas P; Lichtman, Daniel P; Xiao, Bei; Brainard, David H

    2014-02-07

    RenderToolbox3 provides MATLAB utilities and prescribes a workflow that should be useful to researchers who want to employ graphics in the study of vision and perhaps in other endeavors as well. In particular, RenderToolbox3 facilitates rendering scene families in which various scene attributes and renderer behaviors are manipulated parametrically, enables spectral specification of object reflectance and illuminant spectra, enables the use of physically based material specifications, helps validate renderer output, and converts renderer output to physical units of radiance. This paper describes the design and functionality of the toolbox and discusses several examples that demonstrate its use. We have designed RenderToolbox3 to be portable across computer hardware and operating systems and to be free and open source (except for MATLAB itself). RenderToolbox3 is available at https://github.com/DavidBrainard/RenderToolbox3.

  19. Parallel Computation of the Jacobian Matrix for Nonlinear Equation Solvers Using MATLAB

    Science.gov (United States)

    Rose, Geoffrey K.; Nguyen, Duc T.; Newman, Brett A.

    2017-01-01

    Demonstrating speedup for parallel code on a multicore shared memory PC can be challenging in MATLAB due to underlying parallel operations that are often opaque to the user. This can limit potential for improvement of serial code even for the so-called embarrassingly parallel applications. One such application is the computation of the Jacobian matrix inherent to most nonlinear equation solvers. Computation of this matrix represents the primary bottleneck in nonlinear solver speed such that commercial finite element (FE) and multi-body-dynamic (MBD) codes attempt to minimize computations. A timing study using MATLAB's Parallel Computing Toolbox was performed for numerical computation of the Jacobian. Several approaches for implementing parallel code were investigated while only the single program multiple data (spmd) method using composite objects provided positive results. Parallel code speedup is demonstrated but the goal of linear speedup through the addition of processors was not achieved due to PC architecture.

  20. CADLIVE toolbox for MATLAB: automatic dynamic modeling of biochemical networks with comprehensive system analysis.

    Science.gov (United States)

    Inoue, Kentaro; Maeda, Kazuhiro; Miyabe, Takaaki; Matsuoka, Yu; Kurata, Hiroyuki

    2014-09-01

    Mathematical modeling has become a standard technique to understand the dynamics of complex biochemical systems. To promote the modeling, we had developed the CADLIVE dynamic simulator that automatically converted a biochemical map into its associated mathematical model, simulated its dynamic behaviors and analyzed its robustness. To enhance the feasibility by CADLIVE and extend its functions, we propose the CADLIVE toolbox available for MATLAB, which implements not only the existing functions of the CADLIVE dynamic simulator, but also the latest tools including global parameter search methods with robustness analysis. The seamless, bottom-up processes consisting of biochemical network construction, automatic construction of its dynamic model, simulation, optimization, and S-system analysis greatly facilitate dynamic modeling, contributing to the research of systems biology and synthetic biology. This application can be freely downloaded from http://www.cadlive.jp/CADLIVE_MATLAB/ together with an instruction.

  1. Gro2mat: a package to efficiently read gromacs output in MATLAB.

    Science.gov (United States)

    Dien, Hung; Deane, Charlotte M; Knapp, Bernhard

    2014-07-30

    Molecular dynamics (MD) simulations are a state-of-the-art computational method used to investigate molecular interactions at atomic scale. Interaction processes out of experimental reach can be monitored using MD software, such as Gromacs. Here, we present the gro2mat package that allows fast and easy access to Gromacs output files from Matlab. Gro2mat enables direct parsing of the most common Gromacs output formats including the binary xtc-format. No openly available Matlab parser currently exists for this format. The xtc reader is orders of magnitudes faster than other available pdb/ascii workarounds. Gro2mat is especially useful for scientists with an interest in quick prototyping of new mathematical and statistical approaches for Gromacs trajectory analyses. © 2014 Wiley Periodicals, Inc. Copyright © 2014 Wiley Periodicals, Inc.

  2. Development of a control system for shell and tube heat exchanger in Matlab simulink

    International Nuclear Information System (INIS)

    Zeeshan, H.M.

    2014-01-01

    The main objective of this research is to develop a control system for heat exchanger so that the desired outlet temperature can be achieved by controlling the flow rate. For this purpose, shell and tube heat exchanger was chosen and modeled it by using its mathematical equations in MATLAB (Matrix Laboratory) Simulink and calculated the outlet temperature by NTU (Number of Transfer Units) effectiveness method. For the purpose of Control system, MPC (Model Predictive Controller) was used. This research will open a new way of Modeling Equations instead of transfer functions in MATLAB (Matrix Laboratory) Simulink. Using the model, it was developed; with controller, so as to manipulate the output temperature by simply controlling the flow rate. It can be justified weather the design of a new heat exchanger would be feasible or not for the specific requirements. At last this research is very helpful in Industries for the purpose of designing, development and control of new Heat Exchangers. (author)

  3. OXSA: An open-source magnetic resonance spectroscopy analysis toolbox in MATLAB.

    Science.gov (United States)

    Purvis, Lucian A B; Clarke, William T; Biasiolli, Luca; Valkovič, Ladislav; Robson, Matthew D; Rodgers, Christopher T

    2017-01-01

    In vivo magnetic resonance spectroscopy provides insight into metabolism in the human body. New acquisition protocols are often proposed to improve the quality or efficiency of data collection. Processing pipelines must also be developed to use these data optimally. Current fitting software is either targeted at general spectroscopy fitting, or for specific protocols. We therefore introduce the MATLAB-based OXford Spectroscopy Analysis (OXSA) toolbox to allow researchers to rapidly develop their own customised processing pipelines. The toolbox aims to simplify development by: being easy to install and use; seamlessly importing Siemens Digital Imaging and Communications in Medicine (DICOM) standard data; allowing visualisation of spectroscopy data; offering a robust fitting routine; flexibly specifying prior knowledge when fitting; and allowing batch processing of spectra. This article demonstrates how each of these criteria have been fulfilled, and gives technical details about the implementation in MATLAB. The code is freely available to download from https://github.com/oxsatoolbox/oxsa.

  4. Wind turbine blockset in Matlab/Simulink. General overview and description of the models

    Energy Technology Data Exchange (ETDEWEB)

    Iov, F.; Timbus, A.V.; Hansen, A.D.; Soerensen, P.; Blaabjerg, F.

    2004-03-01

    This report presents a new developed Matlab/Simulink Toolbox for wind turbine applications. This toolbox has been developed during the research project 'Simulation Platform to model, optimize and design wind turbines' and it has been used as a general developer tool for other three simulation tools: Saber, DIgSILENT, HAWC. The report provides first a quick overview over Matlab issues and then explains the structure of the developed toolbox. The attention in the report is mainly drawn to the description of the most important mathematical models, which have been developed in the Toolbox. Then, some simulation results using the developed models are shown. Finally, some general conclusions regarding this new developed Toolbox as well as some directions for future work are made. (au)

  5. Advantages and Disadvantages of Using MATLAB/ode45 for Solving Differential Equations in Engineering Applications

    OpenAIRE

    Waleed K. Ahmed

    2013-01-01

    The present paper demonstrates the route used for solving differential equations for the engineering applications at UAEU. Usually students at the Engineering Requirements Unit (ERU) stage of the Faculty of Engineering at the UAEU must enroll in a course of Differential Equations and Engineering Applications (MATH 2210) as a prerequisite for the subsequent stages of their study. Mainly, one of the objectives of this course is that the students practice MATLAB software package during the cours...

  6. Stress, strain, and structural dynamics an interactive handbook of formulas, solutions, and Matlab toolboxes

    CERN Document Server

    Yang, Bingen

    2005-01-01

    Stress, Strain, and Structural Dynamics is a comprehensive and definitive reference to statics and dynamics of solids and structures, including mechanics of materials, structural mechanics, elasticity, rigid-body dynamics, vibrations, structural dynamics, and structural controls. This text integrates the development of fundamental theories, formulas and mathematical models with user-friendly interactive computer programs, written in the powerful and popular MATLAB. This unique merger of technical referencing and interactive computing allows instant solution of a variety of engineering problems

  7. Regensim – Matlab toolbox for renewable energy sources modelling and simulation

    Directory of Open Access Journals (Sweden)

    Cristian Dragoş Dumitru

    2011-12-01

    Full Text Available This paper deals with the implementation and development of a Matlab Simulink library named RegenSim designed for modeling, simulations and analysis of real hybrid solarwind-hydro systems connected to local grids. Blocks like wind generators, hydro generators, solar photovoltaic modules and accumulators are implemented. The main objective is the study of the hybrid power system behavior, which allows employing renewable and variable in time energy sources while providing a continuous supply.

  8. Fast MATLAB assembly of FEM matrices in 2D and 3D: Edge elements

    Czech Academy of Sciences Publication Activity Database

    Anjam, I.; Valdman, Jan

    2015-01-01

    Roč. 267, č. 1 (2015), s. 252-263 ISSN 0096-3003 R&D Projects: GA ČR GA13-18652S Institutional support: RVO:67985556 Keywords : MATLAB code vectorization * Finite element method * Edge element * Raviart–Thomas element Subject RIV: BA - General Mathematics Impact factor: 1.345, year: 2015 http://library.utia.cas.cz/separaty/2015/MTR/valdman-0444081.pdf

  9. Numerical solution of multi groups point kinetic equations by simulink toolbox of Matlab software

    International Nuclear Information System (INIS)

    Hadad, K.; Mohamadi, A.; Sabet, H.; Ayobian, N.; Khani, M.

    2004-01-01

    The simulink toolbox of Matlab Software was employed to solve the point kinetics equation with six group delayed neutrons. The method of Adams-Bash ford showed a good convergence in solving the system of simultaneous equations and the obtained results showed good agreements with other numerical schemes. The flexibility of the package in changing the system parameters and the user friendly interface makes this approach a reliable educational package in revealing the affects of reactivity changes on power incursions

  10. Time series analysis of cholera in Matlab, Bangladesh, during 1988-2001.

    Science.gov (United States)

    Ali, Mohammad; Kim, Deok Ryun; Yunus, Mohammad; Emch, Michael

    2013-03-01

    The study examined the impact of in-situ climatic and marine environmental variability on cholera incidence in an endemic area of Bangladesh and developed a forecasting model for understanding the magnitude of incidence. Diarrhoea surveillance data collected between 1988 and 2001 were obtained from a field research site in Matlab, Bangladesh. Cholera cases were defined as Vibrio cholerae O1 isolated from faecal specimens of patients who sought care at treatment centres serving the Matlab population. Cholera incidence for 168 months was correlated with remotely-sensed sea-surface temperature (SST) and in-situ environmental data, including rainfall and ambient temperature. A seasonal autoregressive integrated moving average (SARIMA) model was used for determining the impact of climatic and environmental variability on cholera incidence and evaluating the ability of the model to forecast the magnitude of cholera. There were 4,157 cholera cases during the study period, with an average of 1.4 cases per 1,000 people. Since monthly cholera cases varied significantly by month, it was necessary to stabilize the variance of cholera incidence by computing the natural logarithm to conduct the analysis. The SARIMA model shows temporal clustering of cholera at one- and 12-month lags. There was a 6% increase in cholera incidence with a minimum temperature increase of one degree celsius in the current month. For increase of SST by one degree celsius, there was a 25% increase in the cholera incidence at currrent month and 18% increase in the cholera incidence at two months. Rainfall did not influenc to cause variation in cholera incidence during the study period. The model forecast the fluctuation of cholera incidence in Matlab reasonably well (Root mean square error, RMSE: 0.108). Thus, the ambient and sea-surface temperature-based model could be used in forecasting cholera outbreaks in Matlab.

  11. Design of Flight Control Panel Layout using Graphical User Interface in MATLAB

    Science.gov (United States)

    Wirawan, A.; Indriyanto, T.

    2018-04-01

    This paper introduces the design of Flight Control Panel (FCP) Layout using Graphical User Interface in MATLAB. The FCP is the interface to give the command to the simulation and to monitor model variables while the simulation is running. The command accommodates by the FCP are altitude command, the angle of sideslip command, heading command, and setting command for turbulence model. The FCP was also designed to monitor the flight parameter while the simulation is running.

  12. Outlier Detection for Sensor Systems (ODSS): A MATLAB Macro for Evaluating Microphone Sensor Data Quality.

    Science.gov (United States)

    Vasta, Robert; Crandell, Ian; Millican, Anthony; House, Leanna; Smith, Eric

    2017-10-13

    Microphone sensor systems provide information that may be used for a variety of applications. Such systems generate large amounts of data. One concern is with microphone failure and unusual values that may be generated as part of the information collection process. This paper describes methods and a MATLAB graphical interface that provides rapid evaluation of microphone performance and identifies irregularities. The approach and interface are described. An application to a microphone array used in a wind tunnel is used to illustrate the methodology.

  13. Generating optimal control simulations of musculoskeletal movement using OpenSim and MATLAB.

    Science.gov (United States)

    Lee, Leng-Feng; Umberger, Brian R

    2016-01-01

    Computer modeling, simulation and optimization are powerful tools that have seen increased use in biomechanics research. Dynamic optimizations can be categorized as either data-tracking or predictive problems. The data-tracking approach has been used extensively to address human movement problems of clinical relevance. The predictive approach also holds great promise, but has seen limited use in clinical applications. Enhanced software tools would facilitate the application of predictive musculoskeletal simulations to clinically-relevant research. The open-source software OpenSim provides tools for generating tracking simulations but not predictive simulations. However, OpenSim includes an extensive application programming interface that permits extending its capabilities with scripting languages such as MATLAB. In the work presented here, we combine the computational tools provided by MATLAB with the musculoskeletal modeling capabilities of OpenSim to create a framework for generating predictive simulations of musculoskeletal movement based on direct collocation optimal control techniques. In many cases, the direct collocation approach can be used to solve optimal control problems considerably faster than traditional shooting methods. Cyclical and discrete movement problems were solved using a simple 1 degree of freedom musculoskeletal model and a model of the human lower limb, respectively. The problems could be solved in reasonable amounts of time (several seconds to 1-2 hours) using the open-source IPOPT solver. The problems could also be solved using the fmincon solver that is included with MATLAB, but the computation times were excessively long for all but the smallest of problems. The performance advantage for IPOPT was derived primarily by exploiting sparsity in the constraints Jacobian. The framework presented here provides a powerful and flexible approach for generating optimal control simulations of musculoskeletal movement using OpenSim and MATLAB. This

  14. POST II Trajectory Animation Tool Using MATLAB, V1.0

    Science.gov (United States)

    Raiszadeh, Behzad

    2005-01-01

    A trajectory animation tool has been developed for accurately depicting position and the attitude of the bodies in flight. The movies generated from This MATLAB based tool serve as an engineering analysis aid to gain further understanding into the dynamic behavior of bodies in flight. This tool has been designed to interface with the output generated from POST II simulations, and is able to animate a single as well as multiple vehicles in flight.

  15. Implementation of PID Controller in MATLAB for Real Time DC Motor Speed Control System

    Directory of Open Access Journals (Sweden)

    Manjunatha Reddy H. K.

    2011-03-01

    Full Text Available In this paper the implementation of PIDC (proportional + integral + derivative controller in MATLAB environment for real time DC motor speed control is presented. The MATLAB environment is chosen because of availability of tool boxes which allows the effective way of implementation and analysis of the control system. The performance of PID controller for different inputs is studied. To establish a communication between PC and process parameter, an indigenous Analog to digital and digital to analog (AD-DA board is designed. This board consists of 12-bit A/D converter and 12-bit D/A converter to facilitate the data acquisition and control. In the present study Advantech make PCI-1751 DIOT card is used to interface AD-DA board to PC externally. The data between the AD-DA board and the PC is communicated through the script file written in MATLAB environment. By applying different standard test commands such as step, square, staircase and triangular, the performance of PID controller is studied. The PID controller provides better system response in terms of transient as well as steady-state performances. The controller parameters are manually tuned (kp=0.232, ki=0.078 and kd=0.035 and the results of the best tuned PID controller are presented.

  16. Nuclear grade cable thermal life model by time temperature superposition algorithm based on Matlab GUI

    International Nuclear Information System (INIS)

    Lu Yanyun; Gu Shenjie; Lou Tianyang

    2014-01-01

    Background: As nuclear grade cable must endure harsh environment within design life, it is critical to predict cable thermal life accurately owing to thermal aging, which is one of dominant factors of aging mechanism. Purpose: Using time temperature superposition (TTS) method, the aim is to construct nuclear grade cable thermal life model, predict cable residual life and develop life model interactive interface under Matlab GUI. Methods: According to TTS, nuclear grade cable thermal life model can be constructed by shifting data groups at various temperatures to preset reference temperature with translation factor which is determined by non linear programming optimization. Interactive interface of cable thermal life model developed under Matlab GUI consists of superposition mode and standard mode which include features such as optimization of translation factor, calculation of activation energy, construction of thermal aging curve and analysis of aging mechanism., Results: With calculation result comparison between superposition and standard method, the result with TTS has better accuracy than that with standard method. Furthermore, confidence level of nuclear grade cable thermal life with TTS is higher than that with standard method. Conclusion: The results show that TTS methodology is applicable to thermal life prediction of nuclear grade cable. Interactive Interface under Matlab GUI achieves anticipated functionalities. (authors)

  17. Extraction Analysis and Creation of Three-Dimensional Road Profiles Using Matlab OpenCRG Tool

    Directory of Open Access Journals (Sweden)

    Rakesh Hari Borse

    2015-08-01

    Full Text Available In vehicle systems dynamics there are wide applications of simulation of vehicles on road surfaces. These simulation applications are related to vehicle handling ride comfort and durability. For accurate prediction of results there is a need for a reliable and efficient road representations. The efficient representation of road surface profiles is to represent them in three-dimensional space. This is made possible by the CRG Curved Regular Grid approach. OpenCRG is a completely open source project including a tool suite for the creation modification and evaluation of road surfaces. Its objective is to standardized detailed road surface description and it may be used for applications like tire models vibrations or driving simulation. The Matlab tool suite of OpenCRG provides powerful modification or creation tools and allows to visualize the 3D road data representation. The current research focuses on basic concepts of OpenCRG and its Matlab environment. The extraction of longitudinal two-dimensional road profiles from three-dimensional CRG format is researched. The creation of simple virtual three-dimensional roads has been programmed. A Matlab software tool to extract create and analyze the three-dimensional road profiles is to be developed.

  18. Elementary mechanics using Matlab a modern course combining analytical and numerical techniques

    CERN Document Server

    Malthe-Sørenssen, Anders

    2015-01-01

    This book – specifically developed as a novel textbook on elementary classical mechanics – shows how analytical and numerical methods can be seamlessly integrated to solve physics problems. This approach allows students to solve more advanced and applied problems at an earlier stage and equips them to deal with real-world examples well beyond the typical special cases treated in standard textbooks. Another advantage of this approach is that students are brought closer to the way physics is actually discovered and applied, as they are introduced right from the start to a more exploratory way of understanding phenomena and of developing their physical concepts. While not a requirement, it is advantageous for the reader to have some prior knowledge of scientific programming with a scripting-type language. This edition of the book uses Matlab, and a chapter devoted to the basics of scientific programming with Matlab is included. A parallel edition using Python instead of Matlab is also available. Last but not...

  19. A Parallel Controls Software Approach for PEP II: AIDA and Matlab Middle Layer

    International Nuclear Information System (INIS)

    Wittmer, W.; Colocho, W.; White, G.

    2007-01-01

    The controls software in use at PEP II (Stanford Control Program - SCP) had originally been developed in the eighties. It is very successful in routine operation but due to its internal structure it is difficult and time consuming to extend its functionality. This is problematic during machine development and when solving operational issues. Routinely, data has to be exported from the system, analyzed offline, and calculated settings have to be reimported. Since this is a manual process, it is time consuming and error-prone. Setting up automated processes, as is done for MIA (Model Independent Analysis), is also time consuming and specific to each application. Recently, there has been a trend at light sources to use MATLAB as the platform to control accelerators using a 'MATLAB Middle Layer' (MML), and so called channel access (CA) programs to communicate with the low level control system (LLCS). This has proven very successful, especially during machine development time and trouble shooting. A special CA code, named AIDA (Accelerator Independent Data Access), was developed to handle the communication between MATLAB, modern software frameworks, and the SCP. The MML had to be adapted for implementation at PEP II. Colliders differ significantly in their designs compared to light sources, which poses a challenge. PEP II is the first collider at which this implementation is being done. We will report on this effort, which is still ongoing

  20. OPTICON: Pro-Matlab software for large order controlled structure design

    Science.gov (United States)

    Peterson, Lee D.

    1989-01-01

    A software package for large order controlled structure design is described and demonstrated. The primary program, called OPTICAN, uses both Pro-Matlab M-file routines and selected compiled FORTRAN routines linked into the Pro-Matlab structure. The program accepts structural model information in the form of state-space matrices and performs three basic design functions on the model: (1) open loop analyses; (2) closed loop reduced order controller synthesis; and (3) closed loop stability and performance assessment. The current controller synthesis methods which were implemented in this software are based on the Generalized Linear Quadratic Gaussian theory of Bernstein. In particular, a reduced order Optimal Projection synthesis algorithm based on a homotopy solution method was successfully applied to an experimental truss structure using a 58-state dynamic model. These results are presented and discussed. Current plans to expand the practical size of the design model to several hundred states and the intention to interface Pro-Matlab to a supercomputing environment are discussed.

  1. Determination of Nuclear Track Parameters for LR-115 Detector by Using of MATLAB Software Technique

    International Nuclear Information System (INIS)

    AL-Jomaily, F.M.; AL-joburi, H.A.; Mheemeed, A.K.

    2013-01-01

    The nuclear track detector parameters, such as nuclear track diameter D(μm), number of track N T and area of track A T were determined by using MATLAB software technique for IR-115 detector irradiated by alpha particle from 241 Am source under 1.5, 2.5 and 3.5 MeV at etching time T B of 90, 120, 150 and 180 min.By using the image analysis of MATLAB software for nuclear track, the full width at half maximum FWHM and relative resolution R% were calculated for each energy of alpha particles.In this study, it was shown that increasing the alpha energy on the IR-115 detector leads to increased etching time T B and the dropping of R% to minimum value, and then reach a stable value before dropping at values 1.5, 2.5 MeV and unstable at 3.5 MeV. Imaging analysis by MATLAB technique which used in this study reflect good and accurate results for nuclear track detector parameters and we recommend using this technique for determination of these parameters

  2. Prognostics 101: A tutorial for particle filter-based prognostics algorithm using Matlab

    International Nuclear Information System (INIS)

    An, Dawn; Choi, Joo-Ho; Kim, Nam Ho

    2013-01-01

    This paper presents a Matlab-based tutorial for model-based prognostics, which combines a physical model with observed data to identify model parameters, from which the remaining useful life (RUL) can be predicted. Among many model-based prognostics algorithms, the particle filter is used in this tutorial for parameter estimation of damage or a degradation model. The tutorial is presented using a Matlab script with 62 lines, including detailed explanations. As examples, a battery degradation model and a crack growth model are used to explain the updating process of model parameters, damage progression, and RUL prediction. In order to illustrate the results, the RUL at an arbitrary cycle are predicted in the form of distribution along with the median and 90% prediction interval. This tutorial will be helpful for the beginners in prognostics to understand and use the prognostics method, and we hope it provides a standard of particle filter based prognostics. -- Highlights: ► Matlab-based tutorial for model-based prognostics is presented. ► A battery degradation model and a crack growth model are used as examples. ► The RUL at an arbitrary cycle are predicted using the particle filter

  3. Automated processing of thermal infrared images of Osservatorio Vesuviano permanent surveillance network by using Matlab code

    Science.gov (United States)

    Sansivero, Fabio; Vilardo, Giuseppe; Caputo, Teresa

    2017-04-01

    The permanent thermal infrared surveillance network of Osservatorio Vesuviano (INGV) is composed of 6 stations which acquire IR frames of fumarole fields in the Campi Flegrei caldera and inside the Vesuvius crater (Italy). The IR frames are uploaded to a dedicated server in the Surveillance Center of Osservatorio Vesuviano in order to process the infrared data and to excerpt all the information contained. In a first phase the infrared data are processed by an automated system (A.S.I.R.A. Acq- Automated System of IR Analysis and Acquisition) developed in Matlab environment and with a user-friendly graphic user interface (GUI). ASIRA daily generates time-series of residual temperature values of the maximum temperatures observed in the IR scenes after the removal of seasonal effects. These time-series are displayed in the Surveillance Room of Osservatorio Vesuviano and provide information about the evolution of shallow temperatures field of the observed areas. In particular the features of ASIRA Acq include: a) efficient quality selection of IR scenes, b) IR images co-registration in respect of a reference frame, c) seasonal correction by using a background-removal methodology, a) filing of IR matrices and of the processed data in shared archives accessible to interrogation. The daily archived records can be also processed by ASIRA Plot (Matlab code with GUI) to visualize IR data time-series and to help in evaluating inputs parameters for further data processing and analysis. Additional processing features are accomplished in a second phase by ASIRA Tools which is Matlab code with GUI developed to extract further information from the dataset in automated way. The main functions of ASIRA Tools are: a) the analysis of temperature variations of each pixel of the IR frame in a given time interval, b) the removal of seasonal effects from temperature of every pixel in the IR frames by using an analytic approach (removal of sinusoidal long term seasonal component by using a

  4. Résolution des équations différentielles couplées utilisant MATLAB

    OpenAIRE

    Sleiman Tabikh

    2013-01-01

    We deal in this paper the solution of differential equations coupled with the software MATLAB through two examples, the first is the prey-predator model (two differential equations), and the second studies the modeling epidemics (3 Differential Equations).

  5. Quantifying the Effects of Idle-Stop Systems on Fuel Economy in Light-Duty Passenger Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Jeff Wishart; Matthew Shirk

    2012-12-01

    Vehicles equipped with idle-stop (IS) systems are capable of engine shut down when the vehicle is stopped and rapid engine re-start for the vehicle launch. This capability reduces fuel consumption and emissions during periods when the engine is not being utilized to provide propulsion or to power accessories. IS systems are a low-cost and fast-growing technology in the industry-wide pursuit of increased vehicle efficiency, possibly becoming standard features in European vehicles in the near future. In contrast, currently there are only three non-hybrid vehicle models for sale in North America with IS systems and these models are distinctly low-volume models. As part of the United States Department of Energy’s Advanced Vehicle Testing Activity, ECOtality North America has tested the real-world effect of IS systems on fuel consumption in three vehicle models imported from Europe. These vehicles were chosen to represent three types of systems: (1) spark ignition with 12-V belt alternator starter; (2) compression ignition with 12-V belt alternator starter; and (3) direct-injection spark ignition, with 12-V belt alternator starter/combustion restart. The vehicles have undergone both dynamometer and on-road testing; the test results show somewhat conflicting data. The laboratory data and the portion of the on-road data in which driving is conducted on a prescribed route with trained drivers produced significant fuel economy improvement. However, the fleet data do not corroborate improvement, even though the data show significant engine-off time. It is possible that the effects of the varying driving styles and routes in the fleet testing overshadowed the fuel economy improvements. More testing with the same driver over routes that are similar with the IS system-enabled and disabled is recommended. There is anecdotal evidence that current Environmental Protection Agency fuel economy test procedures do not capture the fuel economy gains that IS systems produce in real

  6. Production of palm and Calophyllum inophyllum based biodiesel and investigation of blend performance and exhaust emission in an unmodified diesel engine at high idling conditions

    International Nuclear Information System (INIS)

    Rahman, S.M. Ashrafur; Masjuki, H.H.; Kalam, M.A.; Abedin, M.J.; Sanjid, A.; Sajjad, H.

    2013-01-01

    Highlights: • Biodiesel produced from palm and Calophyllum oil using trans-esterification process. • Produced biodiesels properties were compared with ASTM D6751 standards. • Engine performance and exhaust emissions were evaluated at high idling conditions. • Idling CO and HC emission was reduced using biodiesel–diesel blends. • For low percentages of biodiesel–diesel blends NO X emission increased negligibly. - Abstract: Rapid depletion of fossil fuels, increasing fossil-fuel price, carbon price, and the quest of low carbon fuel for cleaner environment – these are the reason researchers are looking for alternatives of fossil fuels. Renewable, non-flammable, biodegradable, and non-toxic are some reasons that are making biodiesel as a suitable candidate to replace fossil-fuel in near future. In recent years, in many countries of the world production and use of biodiesel has gained popularity. In this research, biodiesel from palm and Calophyllum inophyllum oil has been produced using the trans-esterification process. Properties of the produced biodiesels were compared with the ASTM D6751 standard: biodiesel standard and testing methods. Density, kinematic viscosity, flash point, cloud point, pour point and calorific value, these are the six main physicochemical properties that were investigated. Both palm biodiesel and Calophyllum biodiesel were within the standard limits, so they both can be used as the alternative of diesel fuel. Furthermore, engine performance and emission parameters of a diesel engine run by both palm biodiesel–diesel and Calophyllum biodiesel–diesel blends were evaluated at high idling conditions. Brake specific fuel consumption increased for both the biodiesel–diesel blends compared to pure diesel fuel; however, at highest idling condition, this increase was almost negligible. Exhaust gas temperatures decreased as blend percentages increased for both the biodiesel–diesel blends. For low blend percentages increase in NO

  7. A new Nawaz-Enscore-Ham-based heuristic for permutation flow-shop problems with bicriteria of makespan and machine idle time

    Science.gov (United States)

    Liu, Weibo; Jin, Yan; Price, Mark

    2016-10-01

    A new heuristic based on the Nawaz-Enscore-Ham algorithm is proposed in this article for solving a permutation flow-shop scheduling problem. A new priority rule is proposed by accounting for the average, mean absolute deviation, skewness and kurtosis, in order to fully describe the distribution style of processing times. A new tie-breaking rule is also introduced for achieving effective job insertion with the objective of minimizing both makespan and machine idle time. Statistical tests illustrate better solution quality of the proposed algorithm compared to existing benchmark heuristics.

  8. INTEGRACIÓN DE COMPONENTES COM DE MATLAB/SIMULINK EN EL ENTORNO CASE XBDK, PARA EL MODELADO DE SISTEMAS DE CONFORMACIÓN DE HAZ MATLAB/SIMULINK COM COMPONENT INTEGRATION FOR XBDK CASE ENVIRONMENT, ORIENTED TO BEAMFORMING APLICATIONS

    Directory of Open Access Journals (Sweden)

    Mariano Raboso Mateos

    2009-04-01

    Full Text Available En este artículo se describe la interfaz de acceso a Matlab desde la plataforma XBDK (XML-Based Beamforming Development Kit. La contribución más novedosa es la utilización del lenguaje de script Tcl/Tk para el acceso al entorno Matlab utilizando las interfaces COM, ofrecidas por el servicio Matlab Automation Server. La utilización de lenguajes de script tiene innumerables ventajas a la hora de diseñar, construir y depurar prototipos o automatizar procesos. Muchas de las herramientas que se utilizan hoy en día para procesado de señal de una u otra manera permiten la utilización de lenguajes de script. La combinación de un lenguaje de script, con la posibilidad de acceder de forma detallada a los servicios de Matlab, proporciona una manera flexible, rápida y potente, de integrar servicios en una herramienta CASE integrada como XBDK.This paper describes Matlab access within the XBDK (XML-Based Beamforming Development Kit platform. A well-known script language named Tcl/Tk has been used to perform Matlab COM interfacing, a powerful and little known mechanism, provided by Matlab Automation Server. Automation processing or prototype development, take advantage from script languages such Tcl/Tk. Most recent digital signal processing tools, provide mechanisms to be invoked by script languages. A language script plus COM integration, performs a detail, flexible, quick and powerful mechanism to provide services for a CASE integrated development environment such XBDK.

  9. EEGVIS: A MATLAB toolbox for browsing, exploring, and viewing large datasets

    Directory of Open Access Journals (Sweden)

    Kay A Robbins

    2012-05-01

    Full Text Available Recent advances in data monitoring and sensor technology have accelerated the acquisition of very large data sets. Streaming data sets from instrumentation such as multi-channel EEG recording usually must undergo substantial pre-processing and artifact removal. Even when using automated procedures, most scientists engage in laborious manual examination and processing to assure high quality data and to indentify interesting or problematic data segments. Researchers also do not have a convenient method of method of visually assessing the effects of applying any stage in a processing pipeline. EEGVIS is a MATLAB toolbox that allows users to quickly explore multi-channel EEG and other large array-based data sets using multi-scale drill-down techniques. Customizable summary views reveal potentially interesting sections of data, which users can explore further by clicking to examine using detailed viewing components. The viewer and a companion browser are built on our MoBBED framework, which has a library of modular viewing components that can be mixed and matched to best reveal structure. Users can easily create new viewers for their specific data without any programming during the exploration process. These viewers automatically support pan, zoom, resizing of individual components, and cursor exploration. The toolbox can be used directly in MATLAB at any stage in a processing pipeline, as a plug in for EEGLAB, or as a standalone precompiled application without MATLAB running. EEGVIS and its supporting packages are freely available under the GNU general public license at http://visual.cs.utsa.edu/ eegvis.

  10. A Series of MATLAB Learning Modules to Enhance Numerical Competency in Applied Marine Sciences

    Science.gov (United States)

    Fischer, A. M.; Lucieer, V.; Burke, C.

    2016-12-01

    Enhanced numerical competency to navigate the massive data landscapes are critical skills students need to effectively explore, analyse and visualize complex patterns in high-dimensional data for addressing the complexity of many of the world's problems. This is especially the case for interdisciplinary, undergraduate applied marine science programs, where students are required to demonstrate competency in methods and ideas across multiple disciplines. In response to this challenge, we have developed a series of repository-based data exploration, analysis and visualization modules in MATLAB for integration across various attending and online classes within the University of Tasmania. The primary focus of these modules is to teach students to collect, aggregate and interpret data from large on-line marine scientific data repositories to, 1) gain technical skills in discovering, accessing, managing and visualising large, numerous data sources, 2) interpret, analyse and design approaches to visualise these data, and 3) to address, through numerical approaches, complex, real-world problems, that the traditional scientific methods cannot address. All modules, implemented through a MATLAB live script, include a short recorded lecture to introduce the topic, a handout that gives an overview of the activities, an instructor's manual with a detailed methodology and discussion points, a student assessment (quiz and level-specific challenge task), and a survey. The marine science themes addressed through these modules include biodiversity, habitat mapping, algal blooms and sea surface temperature change and utilize a series of marine science and oceanographic data portals. Through these modules students, with minimal experience in MATLAB or numerical methods are introduced to array indexing, concatenation, sorting, and reshaping, principal component analysis, spectral analysis and unsupervised classification within the context of oceanographic processes, marine geology and

  11. Introduction to TAFI - A Matlab® toolbox for analysis of flexural isostasy

    Science.gov (United States)

    Jha, S.; Harry, D. L.; Schutt, D.

    2016-12-01

    The isostatic response of vertical tectonic loads emplaced on thin elastic plates overlying inviscid substrate and the corresponding gravity anomalies are commonly modeled using well established theories and methodologies of flexural analysis. However, such analysis requires some mathematical and coding expertise on part of users. With that in mind, we designed a new interactive Matlab® toolbox called Toolbox for Analysis of Flexural Isostasy (TAFI). TAFI allows users to create forward models (2-D and 3-D) of flexural deformation of the lithosphere and resulting gravity anomaly. TAFI computes Green's Functions for flexure of the elastic plate subjected to point or line loads, and analytical solution for harmonic loads. Flexure due to non-impulsive, distributed 2-D or 3-D loads are computed by convolving the appropriate Green's function with a user-supplied spatially discretized load function. The gravity anomaly associated with each density interface is calculated by using the Fourier Transform of flexural deflection of these interfaces and estimating the gravity in the wavenumber domain. All models created in TAFI are based on Matlab's intrinsic functions and do not require any specialized toolbox, function or library except those distributed with TAFI. Modeling functions within TAFI can be called from Matlab workspace, from within user written programs or from the TAFI's graphical user interface (GUI). The GUI enables the user to model the flexural deflection of lithosphere interactively, enabling real time comparison of model fit with observed data constraining the flexural deformation and gravity, facilitating rapid search for best fitting flexural model. TAFI is a very useful teaching and research tool and have been tested rigorously in graduate level teaching and basic research environment.

  12. Potential Risk Estimation Drowning Index for Children (PREDIC): a pilot study from Matlab, Bangladesh.

    Science.gov (United States)

    Borse, N N; Hyder, A A; Bishai, D; Baker, T; Arifeen, S E

    2011-11-01

    Childhood drowning is a major public health problem that has been neglected in many low- and middle-income countries. In Matlab, rural Bangladesh, more than 40% of child deaths aged 1-4 years are due to drowning. The main objective of this paper was to develop and evaluate a childhood drowning risk prediction index. A literature review was carried out to document risk factors identified for childhood drowning in Bangladesh. The Newacheck model for special health care needs for children was adapted and applied to construct a childhood drowning risk index called "Potential Risk Estimation Drowning Index for Children" (PREDIC). Finally, the proposed PREDIC Index was applied to childhood drowning deaths and compared with the comparison group from children living in Matlab, Bangladesh. This pilot study used t-tests and Receiver Operating Characteristic (ROC) curve to analyze the results. The PREDIC index was applied to 302 drowning deaths and 624 children 0-4 years old living in Matlab. The results of t-test indicate that the drowned children had a statistically (t=-8.58, p=0.0001) significant higher mean PREDIC score (6.01) than those in comparison group (5.26). Drowning cases had a PREDIC score of 6 or more for 68% of the children however, the comparison group had 43% of the children with score of 6 or more which was statistically significant (t=-7.36, p<0.001). The area under the curve for the Receiver Operating Characteristic curve was 0.662. Index score construction was scientifically plausible; and the index is relatively complete, fairly accurate, and practical. The risk index can help identify and target high risk children with drowning prevention programs. PREDIC index needs to be further tested for its accuracy, feasibility and effectiveness in drowning risk reduction in Bangladesh and other countries. Copyright © 2011 Elsevier Ltd. All rights reserved.

  13. Pregnancy termination in Matlab, Bangladesh: maternal mortality risks associated with menstrual regulation and abortion.

    Science.gov (United States)

    Rahman, Mizanur; DaVanzo, Julie; Razzaque, Abdur

    2014-09-01

    In Bangladesh, both menstrual regulation (MR), which is thought to be a relatively safe method, and abortion, which in this setting is often performed using unsafe methods, are used to terminate pregnancies (known or suspected). However, little is known about changes over time in the use of these methods or their relative mortality risks. Data from the Demographic Surveillance System in Matlab, Bangladesh, on 110,152 pregnancy outcomes between 1989 and 2008 were used to assess changes in mortality risks associated with MR (and a small number of dilation and curettage procedures), abortion and live birth. Tabulation and logistic regression analyses were used to compare outcomes in two areas of Matlab--the comparison area, which receives standard government health and family planning services, and the Maternal and Child Health-Family Planning (MCH-FP) area, which receives enhanced health and family planning services. In Matlab as a whole, the proportion of pregnancies ending in MR increased from 1.9% in 1989-1999 to 4.2% in 2000-2008, while the proportion ending in abortion decreased from 1.6% to 1.1%. The odds of mortality from MR were 4.1 times those from live birth in 1989-1999, but were no longer elevated in 2000-2008. The odds of mortality from abortion were 12.0 and 4.9 times those of live birth in 1989-1999 and 2000-2008, respectively. Reduction in mortality risk was greater in the MCH-FP area than the comparison area (90% vs. 75%). MR is no longer associated with higher mortality risk than live birth in Bangladesh, but abortion is.

  14. A suite of MATLAB-based computational tools for automated analysis of COPAS Biosort data

    Science.gov (United States)

    Morton, Elizabeth; Lamitina, Todd

    2010-01-01

    Complex Object Parametric Analyzer and Sorter (COPAS) devices are large-object, fluorescence-capable flow cytometers used for high-throughput analysis of live model organisms, including Drosophila melanogaster, Caenorhabditis elegans, and zebrafish. The COPAS is especially useful in C. elegans high-throughput genome-wide RNA interference (RNAi) screens that utilize fluorescent reporters. However, analysis of data from such screens is relatively labor-intensive and time-consuming. Currently, there are no computational tools available to facilitate high-throughput analysis of COPAS data. We used MATLAB to develop algorithms (COPAquant, COPAmulti, and COPAcompare) to analyze different types of COPAS data. COPAquant reads single-sample files, filters and extracts values and value ratios for each file, and then returns a summary of the data. COPAmulti reads 96-well autosampling files generated with the ReFLX adapter, performs sample filtering, graphs features across both wells and plates, performs some common statistical measures for hit identification, and outputs results in graphical formats. COPAcompare performs a correlation analysis between replicate 96-well plates. For many parameters, thresholds may be defined through a simple graphical user interface (GUI), allowing our algorithms to meet a variety of screening applications. In a screen for regulators of stress-inducible GFP expression, COPAquant dramatically accelerated data analysis and allowed us to rapidly move from raw data to hit identification. Because the COPAS file structure is standardized and our MATLAB code is freely available, our algorithms should be extremely useful for analysis of COPAS data from multiple platforms and organisms. The MATLAB code is freely available at our web site (www.med.upenn.edu/lamitinalab/downloads.shtml). PMID:20569218

  15. Upgrading Custom Simulink Library Components for Use in Newer Versions of Matlab

    Science.gov (United States)

    Stewart, Camiren L.

    2014-01-01

    The Spaceport Command and Control System (SCCS) at Kennedy Space Center (KSC) is a control system for monitoring and launching manned launch vehicles. Simulations of ground support equipment (GSE) and the launch vehicle systems are required throughout the life cycle of SCCS to test software, hardware, and procedures to train the launch team. The simulations of the GSE at the launch site in conjunction with off-line processing locations are developed using Simulink, a piece of Commercial Off-The-Shelf (COTS) software. The simulations that are built are then converted into code and ran in a simulation engine called Trick, a Government off-the-shelf (GOTS) piece of software developed by NASA. In the world of hardware and software, it is not uncommon to see the products that are utilized be upgraded and patched or eventually fade away into an obsolete status. In the case of SCCS simulation software, Matlab, a MathWorks product, has released a number of stable versions of Simulink since the deployment of the software on the Development Work Stations in the Linux environment (DWLs). The upgraded versions of Simulink has introduced a number of new tools and resources that, if utilized fully and correctly, will save time and resources during the overall development of the GSE simulation and its correlating documentation. Unfortunately, simply importing the already built simulations into the new Matlab environment will not suffice as it will produce results that may not be expected as they were in the version that is currently being utilized. Thus, an upgrade execution plan was developed and executed to fully upgrade the simulation environment to one of the latest versions of Matlab.

  16. Edge detection and mathematic fitting for corneal surface with Matlab software.

    Science.gov (United States)

    Di, Yue; Li, Mei-Yan; Qiao, Tong; Lu, Na

    2017-01-01

    To select the optimal edge detection methods to identify the corneal surface, and compare three fitting curve equations with Matlab software. Fifteen subjects were recruited. The corneal images from optical coherence tomography (OCT) were imported into Matlab software. Five edge detection methods (Canny, Log, Prewitt, Roberts, Sobel) were used to identify the corneal surface. Then two manual identifying methods (ginput and getpts) were applied to identify the edge coordinates respectively. The differences among these methods were compared. Binomial curve (y=Ax 2 +Bx+C), Polynomial curve [p(x)=p1x n +p2x n-1 +....+pnx+pn+1] and Conic section (Ax 2 +Bxy+Cy 2 +Dx+Ey+F=0) were used for curve fitting the corneal surface respectively. The relative merits among three fitting curves were analyzed. Finally, the eccentricity (e) obtained by corneal topography and conic section were compared with paired t -test. Five edge detection algorithms all had continuous coordinates which indicated the edge of the corneal surface. The ordinates of manual identifying were close to the inside of the actual edges. Binomial curve was greatly affected by tilt angle. Polynomial curve was lack of geometrical properties and unstable. Conic section could calculate the tilted symmetry axis, eccentricity, circle center, etc . There were no significant differences between 'e' values by corneal topography and conic section ( t =0.9143, P =0.3760 >0.05). It is feasible to simulate the corneal surface with mathematical curve with Matlab software. Edge detection has better repeatability and higher efficiency. The manual identifying approach is an indispensable complement for detection. Polynomial and conic section are both the alternative methods for corneal curve fitting. Conic curve was the optimal choice based on the specific geometrical properties.

  17. EEGVIS: A MATLAB Toolbox for Browsing, Exploring, and Viewing Large Datasets.

    Science.gov (United States)

    Robbins, Kay A

    2012-01-01

    Recent advances in data monitoring and sensor technology have accelerated the acquisition of very large data sets. Streaming data sets from instrumentation such as multi-channel EEG recording usually must undergo substantial pre-processing and artifact removal. Even when using automated procedures, most scientists engage in laborious manual examination and processing to assure high quality data and to indentify interesting or problematic data segments. Researchers also do not have a convenient method of method of visually assessing the effects of applying any stage in a processing pipeline. EEGVIS is a MATLAB toolbox that allows users to quickly explore multi-channel EEG and other large array-based data sets using multi-scale drill-down techniques. Customizable summary views reveal potentially interesting sections of data, which users can explore further by clicking to examine using detailed viewing components. The viewer and a companion browser are built on our MoBBED framework, which has a library of modular viewing components that can be mixed and matched to best reveal structure. Users can easily create new viewers for their specific data without any programming during the exploration process. These viewers automatically support pan, zoom, resizing of individual components, and cursor exploration. The toolbox can be used directly in MATLAB at any stage in a processing pipeline, as a plug-in for EEGLAB, or as a standalone precompiled application without MATLAB running. EEGVIS and its supporting packages are freely available under the GNU general public license at http://visual.cs.utsa.edu/eegvis.

  18. Control-oriented Automatic System for Transport Analysis (ASTRA)-Matlab integration for Tokamaks

    International Nuclear Information System (INIS)

    Sevillano, M.G.; Garrido, I.; Garrido, A.J.

    2011-01-01

    The exponential growth in energy consumption has led to a renewed interest in the development of alternatives to fossil fuels. Between the unconventional resources that may help to meet this energy demand, nuclear fusion has arisen as a promising source, which has given way to an unprecedented interest in solving the different control problems existing in nuclear fusion reactors such as Tokamaks. The aim of this manuscript is to show how one of the most popular codes used to simulate the performance of Tokamaks, the Automatic System For Transport Analysis (ASTRA) code, can be integrated into the Matlab-Simulink tool in order to make easier and more comfortable the development of suitable controllers for Tokamaks. As a demonstrative case study to show the feasibility and the goodness of the proposed ASTRA-Matlab integration, a modified anti-windup Proportional Integral Derivative (PID)-based controller for the loop voltage of a Tokamak has been implemented. The integration achieved represents an original and innovative work in the Tokamak control area and it provides new possibilities for the development and application of advanced control schemes to the standardized and widely extended ASTRA transport code for Tokamaks. -- Highlights: → The paper presents a useful tool for rapid prototyping of different solutions to deal with the control problems arising in Tokamaks. → The proposed tool embeds the standardized Automatic System For Transport Analysis (ASTRA) code for Tokamaks within the well-known Matlab-Simulink software. → This allows testing and combining diverse control schemes in a unified way considering the ASTRA as the plant of the system. → A demonstrative Proportional Integral Derivative (PID)-based case study is provided to show the feasibility and capabilities of the proposed integration.

  19. Modelling organs, tissues, cells and devices using Matlab and Comsol multiphysics

    CERN Document Server

    Dokos, Socrates

    2017-01-01

    This book presents a theoretical and practical overview of computational modeling in bioengineering, focusing on a range of applications including electrical stimulation of neural and cardiac tissue, implantable drug delivery, cancer therapy, biomechanics, cardiovascular dynamics, as well as fluid-structure interaction for modelling of organs, tissues, cells and devices. It covers the basic principles of modeling and simulation with ordinary and partial differential equations using MATLAB and COMSOL Multiphysics numerical software. The target audience primarily comprises postgraduate students and researchers, but the book may also be beneficial for practitioners in the medical device industry.

  20. MATLAB-Like Scripting of Java Scientific Libraries in ScalaLab

    Directory of Open Access Journals (Sweden)

    Stergios Papadimitriou

    2014-01-01

    Full Text Available Although there are a lot of robust and effective scientific libraries in Java, the utilization of these libraries in pure Java is difficult and cumbersome, especially for the average scientist that does not expertise in software development. We illustrate that ScalaLab presents an easier and productive MATLAB like front end. Also, the main strengths and weaknesses of the core Java libraries of ScalaLab are elaborated. Since performance is of paramount importance for scientific computation, the article discusses extensively performance aspects of the ScalaLab environment. Also, Java bytecode performance is compared to native code.

  1. Simulation of an actuator & drive of a wire drawing machine's mechatronic system using Matlab/Simulink

    Energy Technology Data Exchange (ETDEWEB)

    Tasevski, Gotse; Petreski, Zlatko; Shishkovski, Dejan [Faculty of Mechanical Engineering, ' Ss. Cyril and Methodius' University, Skopje (Macedonia, The Former Yugoslav Republic of)

    2014-07-01

    Simulation of a mechatronic system actuator, implemented in a wire drawing machine, developed in Matlab/Simulink environment is presented in this paper. AC induction motor with vector control drive is chosen as an actuator. Mathematical model of the actuator is expressed in d-q reference frame rotating at synchronous speed. Diagrams for calculation of the important parameters for the simulation of the actuator were constructed. Simulation results from the model behaviour were discussed in comparison with the specified parameters by the manufacturer of the existing actuator integrated in such mechatronic system. (Author)

  2. PID and predictive control of electrical drives and power converters using MATLAB/Simulink

    CERN Document Server

    Wang, Liuping; Yoo, Dae; Gan, Lu; Ng, Ki

    2015-01-01

    A timely introduction to current research on PID and predictive control by one of the leading authors on the subject PID and Predictive Control of Electric Drives and Power Supplies using MATLAB/Simulink examines the classical control system strategies, such as PID control, feed-forward control and cascade control, which are widely used in current practice.  The authors share their experiences in actual design and implementation of the control systems on laboratory test-beds, taking the reader from the fundamentals through to more sophisticated design and analysis.    The book contains secti

  3. Advanced electric drives analysis, control, and modeling using MATLAB/Simulink

    CERN Document Server

    Mohan, Ned

    2014-01-01

    Advanced Electric Drives utilizes a physics-based approach to explain the fundamental concepts of modern electric drive control and its operation under dynamic conditions. Gives readers a "physical" picture of electric machines and drives without resorting to mathematical transformations for easy visualization Confirms the physics-based analysis of electric drives mathematically Provides readers with an analysis of electric machines in a way that can be easily interfaced to common power electronic converters and controlled using any control scheme Makes the MATLAB/Simulink files used in exampl

  4. GPELab, a Matlab toolbox to solve Gross-Pitaevskii equations II: Dynamics and stochastic simulations

    Science.gov (United States)

    Antoine, Xavier; Duboscq, Romain

    2015-08-01

    GPELab is a free Matlab toolbox for modeling and numerically solving large classes of systems of Gross-Pitaevskii equations that arise in the physics of Bose-Einstein condensates. The aim of this second paper, which follows (Antoine and Duboscq, 2014), is to first present the various pseudospectral schemes available in GPELab for computing the deterministic and stochastic nonlinear dynamics of Gross-Pitaevskii equations (Antoine, et al., 2013). Next, the corresponding GPELab functions are explained in detail. Finally, some numerical examples are provided to show how the code works for the complex dynamics of BEC problems.

  5. The development of gamma imaging system's aided software using matlab GUI

    International Nuclear Information System (INIS)

    Yang Yapeng; Xu Yuan; Jin Gen

    2011-01-01

    The RadCam 2000 gamma imaging system's software supplied by the manufacture cannot be run when the PC disconnected to the system's hardware, also cannot be used to analysis the results acquired, therefore, we have developed easyRadCam using Matlab GUI with the ability of generating the 'hot point' three-dimensional distribution by importing the results acquired, giving the counts distribution versus channel number. After the system be calibrated, we can get the energy spectrum, even the type of nuclides exist. (authors)

  6. Biomedical image analysis recipes in Matlab for life scientists and engineers

    CERN Document Server

    Reyes-Aldasoro, Constantino Carlos

    2015-01-01

    As its title suggests, this innovative book has been written for life scientists needing to analyse their data sets, and programmers, wanting a better understanding of the types of experimental images life scientists investigate on a regular basis. Each chapter presents one self-contained biomedical experiment to be analysed. Part I of the book presents its two basic ingredients: essential concepts of image analysis and Matlab. In Part II, algorithms and techniques are shown as series of 'recipes' or solved examples that show how specific techniques are applied to a biomedical experiments like

  7. A MATLAB Script for Solving 2D/3D Minimum Compliance Problems using Anisotropic Mesh Adaptation

    DEFF Research Database (Denmark)

    Jensen, Kristian Ejlebjerg

    2017-01-01

    We present a pure MATLAB implementation for solving 2D/3D compliance minimization problems using the density method. A filtered design variable with a minimum length is computed using a Helmholtz-type differential equation. The optimality criteria is used as optimizer and to avoid local minima we...... apply continuation of an exponent that controls the stiffness associated with intermediate design variables. We constrain the volume from above and use the implementation to show that optimizations with dynamic meshes can save significant amounts of computational time compared to fixed meshes without...

  8. MATLAB implementation of satellite positioning error overbounding by generalized Pareto distribution

    Science.gov (United States)

    Ahmad, Khairol Amali; Ahmad, Shahril; Hashim, Fakroul Ridzuan

    2018-02-01

    In the satellite navigation community, error overbound has been implemented in the process of integrity monitoring. In this work, MATLAB programming is used to implement the overbounding of satellite positioning error CDF. Using a trajectory of reference, the horizontal position errors (HPE) are computed and its non-parametric distribution function is given by the empirical Cumulative Distribution Function (ECDF). According to the results, these errors have a heavy-tailed distribution. Sınce the ECDF of the HPE in urban environment is not Gaussian distributed, the ECDF is overbound with the CDF of the generalized Pareto distribution (GPD).

  9. DSP for Matlab and Labview I fundamentals of discrete signal processing

    CERN Document Server

    Isen, Forester W

    2009-01-01

    This book is Volume I of the series DSP for MATLAB™ and LabVIEW™. The entire series consists of four volumes that collectively cover basic digital signal processing in a practical and accessible manner, but which nonetheless include all essential foundation mathematics. As the series title implies, the scripts (of which there are more than 200) described in the text and supplied in code form here will run on both MATLAB and LabVIEW. Volume I consists of four chapters. The first chapter gives a brief overview of the field of digital signal processing. This is followed by a chapter detailing man

  10. Modeling of serial data acquisition structure for GEM detector system in Matlab

    Science.gov (United States)

    Kolasinski, Piotr; Pozniak, Krzysztof T.; Czarski, Tomasz; Chernyshova, Maryna; Kasprowicz, Grzegorz; Krawczyk, Rafal D.; Wojenski, Andrzej; Zabolotny, Wojciech; Byszuk, Adrian

    2016-09-01

    This article presents method of modeling in Matlab hardware architecture dedicated for FPGA created by languages like VHDL or Verilog. Purposes of creating such type of model with its advantages and disadvantages are described. Rules presented in this article were exploited to create model of Serial Data Acquisition algorithm used in X-ray GEM detector system. Result were compared to real working model implemented in VHDL. After testing of basic structure, other two structures were modeled to see influence parameters of the structure on its behavior.

  11. Modelling and Simulation Based on Matlab/Simulink: A Press Mechanism

    International Nuclear Information System (INIS)

    Halicioglu, R; Dulger, L C; Bozdana, A T

    2014-01-01

    In this study, design and kinematic analysis of a crank-slider mechanism for a crank press is studied. The crank-slider mechanism is the commonly applied one as direct and indirect drive alternatives in practice. Since inexpensiveness, flexibility and controllability are getting more and more important in many industrial applications especially in automotive industry, a crank press with servo actuator (servo crank press) is taken as an application. Design and kinematic analysis of representative mechanism is presented with geometrical analysis for the inverse kinematic of the mechanism by using desired motion concept of slider. The mechanism is modelled in MATLAB/Simulink platform. The simulation results are presented herein

  12. Modelling and Simulation Based on Matlab/Simulink: A Press Mechanism

    Science.gov (United States)

    Halicioglu, R.; Dulger, L. C.; Bozdana, A. T.

    2014-03-01

    In this study, design and kinematic analysis of a crank-slider mechanism for a crank press is studied. The crank-slider mechanism is the commonly applied one as direct and indirect drive alternatives in practice. Since inexpensiveness, flexibility and controllability are getting more and more important in many industrial applications especially in automotive industry, a crank press with servo actuator (servo crank press) is taken as an application. Design and kinematic analysis of representative mechanism is presented with geometrical analysis for the inverse kinematic of the mechanism by using desired motion concept of slider. The mechanism is modelled in MATLAB/Simulink platform. The simulation results are presented herein.

  13. Modeling hydraulic regenerative hybrid vehicles using AMESim and Matlab/Simulink

    Science.gov (United States)

    Lynn, Alfred; Smid, Edzko; Eshraghi, Moji; Caldwell, Niall; Woody, Dan

    2005-05-01

    This paper presents the overview of the simulation modeling of a hydraulic system with regenerative braking used to improve vehicle emissions and fuel economy. Two simulation software packages were used together to enhance the simulation capability for fuel economy results and development of vehicle and hybrid control strategy. AMESim, a hydraulic simulation software package modeled the complex hydraulic circuit and component hardware and was interlinked with a Matlab/Simulink model of the vehicle, engine and the control strategy required to operate the vehicle and the hydraulic hybrid system through various North American and European drive cycles.

  14. MatchGUI: A Graphical MATLAB-Based Tool for Automatic Image Co-Registration

    Science.gov (United States)

    Ansar, Adnan I.

    2011-01-01

    MatchGUI software, based on MATLAB, automatically matches two images and displays the match result by superimposing one image on the other. A slider bar allows focus to shift between the two images. There are tools for zoom, auto-crop to overlap region, and basic image markup. Given a pair of ortho-rectified images (focused primarily on Mars orbital imagery for now), this software automatically co-registers the imagery so that corresponding image pixels are aligned. MatchGUI requires minimal user input, and performs a registration over scale and inplane rotation fully automatically

  15. SOLUTION OF THE PROBLEM OF INCREASING THE CAPACITY OF POWER SYSTEM BY USING THE MATLAB MODELING

    International Nuclear Information System (INIS)

    Mshvidobadze, T.

    2008-01-01

    A mathematical model of power system was constructed. It included eight types of electric power plants essential for covering a deficit and bringing the generating capacities of the power system to the level which would provide its normal operation. The restrictions were stated in terms of inequalities, the efficiency function was chosen and the corresponding problem was solved by using the Matlab system. The obtained values of variables represented the values of generated capacities of appropriate power plants providing the minimum value of the efficiency function. (author)

  16. A Review On Linear Programming Analysis Of The Outsourcing Problem Using MATLAB

    Directory of Open Access Journals (Sweden)

    FLt Lt Dinesh Kumar Gupta Retd.

    2015-08-01

    Full Text Available Abstract This study examines the case where market demand exceeds the companys capacity to manufacture. Manufacturing companies often function in situations where internal production resources constrain their throughput. Such situations are characterized as the problem of finite capacity scheduling. Management policy is to meet all demand in order to prevent competitor from entering the field. Now if management needs to decide what quantities of each product to manufacture and what quantities to buy from external contractors. In this study we have described two methodologies based on LP analysis to solve production outsourcing problem using latest version of MATLAB. We choose the best methodology which gives us maximum profits.

  17. Optimal service using Matlab - simulink controlled Queuing system at call centers

    Science.gov (United States)

    Balaji, N.; Siva, E. P.; Chandrasekaran, A. D.; Tamilazhagan, V.

    2018-04-01

    This paper presents graphical integrated model based academic research on telephone call centres. This paper introduces an important feature of impatient customers and abandonments in the queue system. However the modern call centre is a complex socio-technical system. Queuing theory has now become a suitable application in the telecom industry to provide better online services. Through this Matlab-simulink multi queuing structured models provide better solutions in complex situations at call centres. Service performance measures analyzed at optimal level through Simulink queuing model.

  18. An evaluation of interventions for reducing the risk of PRRSV introduction to filtered farms via retrograde air movement through idle fans.

    Science.gov (United States)

    Alonso, Carmen; Otake, Satoshi; Davies, Peter; Dee, Scott

    2012-06-15

    Porcine reproductive and respiratory syndrome virus (PRRSV) is an economically significant pathogen of pigs that can be transported via the airborne route out to 9.1 km. To reduce this risk, large swine facilities have started to implement systems to filter contaminated incoming air. A proposed means of air filtration failure is the retrograde movement of air (back-drafting) from the external environment into the animal air space through non-filtered points such as idle wall fans; however, this risk has not been validated. Therefore, the purpose of this study was threefold: (1) to prove that PRRSV introduction via retrograde air movement through idle fans is a true risk; (2) to determine the minimum retrograde air velocity necessary to introduce PRRSV to an animal airspace from an external source; and (3) to evaluate the efficacy of different interventions designed to reduce this risk. A retrograde air movement model was used to test a range of velocities and interventions, including a standard plastic shutter, a plastic shutter plus a canvas cover, a nylon air chute, an aluminum shutter plus an air chute and a double shutter system. Results indicated that retrograde air movement is a real risk for PRRSV introduction to a filtered air space; however, it required a velocity of 0.76 m/s. In addition, while all the interventions designed to reduce this risk were superior when compared to a standard plastic shutter, significant differences were detected between treatments. Copyright © 2012 Elsevier B.V. All rights reserved.

  19. Environmental Impact Assessment, Brownfield Areas. Brownfields are defined by the Florida DEP as abandoned, idled, or underused industrial and commercial facilities where expansion or redevelopment is complicated by real or perceived environmental contamination., Published in 2001, 1:24000 (1in=2000ft) scale, Florida Department of Environmental Protection (FDEP).

    Data.gov (United States)

    NSGIC State | GIS Inventory — Environmental Impact Assessment dataset current as of 2001. Brownfield Areas. Brownfields are defined by the Florida DEP as abandoned, idled, or underused industrial...

  20. Development of Airport Noise Mapping using Matlab Software (Case Study: Adi Soemarmo Airport - Boyolali, Indonesia)

    Science.gov (United States)

    Andarani, Pertiwi; Setiyo Huboyo, Haryono; Setyanti, Diny; Budiawan, Wiwik

    2018-02-01

    Noise is considered as one of the main environmental impact of Adi Soemarmo International Airport (ASIA), the second largest airport in Central Java Province, Indonesia. In order to manage the noise of airport, airport noise mapping is necessary. However, a model that requires simple input but still reliable was not available in ASIA. Therefore, the objective of this study are to develop model using Matlab software, to verify its reliability by measuring actual noise exposure, and to analyze the area of noise levels‥ The model was developed based on interpolation or extrapolation of identified Noise-Power-Distance (NPD) data. In accordance with Indonesian Government Ordinance No.40/2012, the noise metric used is WECPNL (Weighted Equivalent Continuous Perceived Noise Level). Based on this model simulation, there are residence area in the region of noise level II (1.912 km2) and III (1.16 km2) and 18 school buildings in the area of noise levels I, II, and III. These land-uses are actually prohibited unless noise insulation is equipped. The model using Matlab in the case of Adi Soemarmo International Airport is valid based on comparison of the field measurement (6 sampling points). However, it is important to validate the model again once the case study (the airport) is changed.