WorldWideScience

Sample records for identifying timber surface

  1. Silver mirror reaction as an approach to construct a durable, robust superhydrophobic surface of bamboo timber with high conductivity

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Chunde; Li, Jingpeng [School of Engineering, Zhejiang Agricultural and Forestry University, Lin’an 311300 (China); Key Laboratory of Wood Science and Technology, Zhejiang Province (China); Han, Shenjie; Wang, Jin; Yao, Qiufang [School of Engineering, Zhejiang Agricultural and Forestry University, Lin’an 311300 (China); Sun, Qingfeng, E-mail: zafuqfsun@163.com [School of Engineering, Zhejiang Agricultural and Forestry University, Lin’an 311300 (China); Key Laboratory of Wood Science and Technology, Zhejiang Province (China)

    2015-06-25

    Highlights: • Ag NPs were deposited onto the surface of bamboo timber by silver mirror reaction. • The Ag NPs made the intrinsic insulating bamboo timber have a high conductivity. • The modified surfaces displayed superhydrophobicity even for corrosive solutions. - Abstract: Silver nanoparticles (Ag NPs) were successfully in situ deposited onto the surface of the bamboo timber through a simple silver mirror reaction. Scanning electron microscopy (SEM) images showed that the surface of the bamboo timber was densely covered with the uniform Ag NPs, which made the intrinsic insulating bamboo timber conductive. With further modification by fluoroalkylsilane (FAS), the Ag NPs-covered bamboo timber showed superhydrophobicity with the water contact angle (WCA) of 155°. Simultaneously, the modified bamboo timber displayed a durable and robust superhydrophobic property even under corrosive solutions including acidic, alkali and NaCl solutions with different molar concentrations. Especially in harsh conditions of boiling water or intense water stirring, the modified bamboo timber remained superhydrophobicity and high conductivity.

  2. 36 CFR 223.195 - Procedures for identifying and marking unprocessed timber.

    Science.gov (United States)

    2010-07-01

    ... procedures required herein. (f) Waiver of branding requirements. Regional Foresters may waive the branding... individual timber sale basis, all or a portion of the branding requirements pursuant to paragraph (c)(2) of...) Regions 5 and 6. On an individual timber sale basis, the branding requirement pursuant to paragraph (c)(2...

  3. Revivification of a method for identifying longleaf pine timber and its application to southern pine relicts in southeastern Virginia

    Science.gov (United States)

    Thomas L. Eberhardt; Philip M. Sheridan; Arvind A.R. Bhuta

    2011-01-01

    Abstract: Longleaf pine (Pinus palustris Mill.) cannot be distinguished from the other southern pines based on wood anatomy alone. A method that involves measuring pith and second annual ring diameters, reported by Arthur Koehler in 1932 (The Southern Lumberman, 145: 36–37), was revisited as an option for identifying longleaf pine timbers and stumps. Cross-section...

  4. Timber Curtain

    DEFF Research Database (Denmark)

    2015-01-01

    Timber Curtain is a site specific architectural installation, which is part of a research project conducted at the Aarhus School of Architecture as collaboration between Ph.D. and associate professor Niels Martin Larsen and the author. Through a digitally scripted associative model we performed s...... of pinewood timber, machined with a CMS Antares 5-axis CNC router. The digital process generation and simulation was implemented with Rhinoceros 3D, Grasshopper and GHPython, and AlphaCAM was used for preparing the CNC-routing....

  5. Timber tracking

    DEFF Research Database (Denmark)

    Düdder, Boris; Ross, Omry

    2017-01-01

    Managing and verifying forest products in a value chain is often reliant on easily manipulated document or digital tracking methods - Chain of Custody Systems. We aim to create a new means of tracking timber by developing a tamper proof digital system based on Blockchain technology. Blockchain...

  6. Recommendations for sustainable development of non-timber forest products

    Science.gov (United States)

    Gina H. Mohammed

    2001-01-01

    Non-timber forest products--or NTFPs--are considered here to be botanical products harvested or originating from forest-based species, but excluding primary timber products, industrial boards and composites, and paper products. A recent study of non-timber forest products in Ontario, Canada, identified at least 50 types of NTFPs and hundreds of specific products used...

  7. Damping in Timber Structures

    OpenAIRE

    Labonnote, Nathalie

    2012-01-01

    Key point to development of environmentally friendly timber structures, appropriate to urban ways of living, is the development of high-rise timber buildings. Comfort properties are nowadays one of the main limitations to tall timber buildings, and an enhanced knowledge on damping phenomena is therefore required, as well as improved prediction models for damping. The aim of this work has consequently been to estimate various damping quantities in timber structures. In particular, models h...

  8. Understanding Loss Deductions for Timber

    Science.gov (United States)

    John Greene; Michael Jacobson

    1998-01-01

    Forestland owners whose timber has been destroyed may be eligible to take a deduction for the loss on their federal income tax. The loss must be physical in nature and caused by an identifiable event or combination of events that has run its course. There are two types of losses from natural events. Casualty losses are sudden, unexpected, and unusual - as from a fire...

  9. CONTEMPORARY SLOVENIAN TIMBER ARCHITECTURE INTERNATIONAL RECOGNIZED

    Directory of Open Access Journals (Sweden)

    Manja Kitek Kuzman

    2014-12-01

    Full Text Available The book presents Slovenia' s contemporary timber architecture. Thanks to its abundant forests, Slovenia has preserved the tradition of wood construction. As much as 60% of its surface is covered by forests. Slovenia is also the third most forested country in Europe. The high share of forest-covered surface allows for a sustainable production of high-quality wood. In the past, wood was used primarily in the construction of farm buildings, but now timber architecture is used for everything from residences and office buildings to public buildings such as community centres and schools. Timber construction is becoming increasingly popular. Apart from larger companies taking this approach, a great number of wooden houses have sprung up, built either on personal initiative or with the support of carpenter workshops. Slovenian timber architecture has taken a new approach to environmental and energy-efficiency problems and received great international recognition. The book discusses over fifty projects built over a ten-year period, and includes descriptions, photographs, and plans. The projects include residential areas, administration, and office, as well as tourist, educational, and industrial buildings. Timber architecture is presented as an integral part of the Slovenian landscape. The monograph will be useful to designers and future experts in their planning of optimal timber buildings and will highlight the main benefits of using timber construction.

  10. Application of identifying transmission spheres for spherical surface testing

    Science.gov (United States)

    Han, Christopher B.; Ye, Xin; Li, Xueyuan; Wang, Quanzhao; Tang, Shouhong; Han, Sen

    2017-06-01

    We developed a new application on Microsoft Foundation Classes (MFC) to identify correct transmission spheres (TS) for Spherical Surface Testing (SST). Spherical surfaces are important optical surfaces, and the wide application and high production rate of spherical surfaces necessitates an accurate and highly reliable measuring device. A Fizeau Interferometer is an appropriate tool for SST due to its subnanometer accuracy. It measures the contour of a spherical surface using a common path, which is insensitive to the surrounding circumstances. The Fizeau Interferometer transmits a wide laser beam, creating interference fringes from re-converging light from the transmission sphere and the test surface. To make a successful measurement, the application calculates and determines the appropriate transmission sphere for the test surface. There are 3 main inputs from the test surfaces that are utilized to determine the optimal sizes and F-numbers of the transmission spheres: (1) the curvatures (concave or convex), (2) the Radii of Curvature (ROC), and (3) the aperture sizes. The application will firstly calculate the F-numbers (i.e. ROC divided by aperture) of the test surface, secondly determine the correct aperture size of a convex surface, thirdly verify that the ROC of the test surface must be shorter than the reference surface's ROC of the transmission sphere, and lastly calculate the percentage of area that the test surface will be measured. However, the amount of interferometers and transmission spheres should be optimized when measuring large spherical surfaces to avoid requiring a large amount of interferometers and transmission spheres for each test surface. Current measuring practices involve tedious and potentially inaccurate calculations. This smart application eliminates human calculation errors, optimizes the selection of transmission spheres (including the least number required) and interferometer sizes, and increases efficiency.

  11. Section of mechanized timbering

    Energy Technology Data Exchange (ETDEWEB)

    Balaganskiy, S Ye; Aksanov, Sh I; Ardashev, K A; Mednik, L Ye; Mikhaylov, P G

    1980-09-05

    A section of mechanized timbering is claimed which contains a base, roof timber, hydraulic stand, hydraulic packing cylinders, packing telescopic shield hinged to the roof timber by means of guides. To improve the reliability of forming the filling massif, the packing telescopic shield is made in the form of individual telescopic beams with guards which are interconnected by means of cross beams, while the gaps between the telescopic beams are covered with elasic plates.

  12. Changes to timber market

    International Nuclear Information System (INIS)

    Haluza, I.

    2008-01-01

    Ten thousands of tree trunks have ended up in the Liptovska Mara lake. The fact that state owned company Lesy SR decided to store the timber in the reservoir as it could not sell it on the market represents a small revolution in the industry. About a year ago timber processing companies were fighting for timber and suddenly it cannot be sold and has to be stored in the reservoir waiting for better times. When the forestry and timber processing industry will not be in such a difficult situation as it is now. Timber, floor and furniture manufacturers claim that the demand for their products and consequently also prices are falling. Some have already started to decrease production and started making redundancies. And when manufacturers complain, the timber suppliers are not happy either. The reason is that the industry has been hit by several blows at the same time. In last three to four years forests in Slovakia, Czech Republic, Austria, Scandinavia and in Canada have suffered several heavy windstorms after which large volumes of timber had to be processed quickly. So there was an excess of timber, particularly spruce. This created an ideal situation for the processing industry where the more agile companies increased their market share and offered timber at more competitive prices. (authors)

  13. Timber salvage economics

    Science.gov (United States)

    Jeffrey P. Prestemon; Thomas P. Holmes

    2008-01-01

    Timber salvage is commonly done following natural disturbances, to recover some value from damaged forests. Decision making about salvage, however, is affected by ownership objectives, the nature of the damage agent, site factors, and the strength of the local timber market. For profit-maximizing landowners, salvage decisions must balance the cost of harvesting...

  14. timber for structural use

    African Journals Online (AJOL)

    HOD

    Logs of Apa timber were air-dried and along the stem, 324 pieces of test specimens were ..... (machine) manual with the load rate of 1mm/min ..... [16] Desch, H. E., Timber properties, 6th. Edition,. Revised by J. M. Dinwoodie. Macmillan ...

  15. 1970 Oregon timber harvest.

    Science.gov (United States)

    Brian R. Wall

    1971-01-01

    The 1970 Oregon timber harvest of 7.98 billion board feet was the lowest recorded since the recession year of 1961 when 7.41 billion board feet of timber was produced. The 1970 log production figure was 12.8 percent below the 1969 harvest, the second consecutive year of declining production in Oregon.

  16. Traditional timber frames

    NARCIS (Netherlands)

    Jorissen, A.J.M.; Hamer, den J.; Leijten, A.J.M.; Salenikovich, A.

    2014-01-01

    Due to new possibilities traditional timber framing has become increasingly popular since the beginning of the 21e century. Although traditional timber framing has been used for centuries, the expected mechanical behaviour is not dealt with in great detail in building codes, guidelines or text

  17. Methods To Identify Aptamers against Cell Surface Biomarkers

    Directory of Open Access Journals (Sweden)

    Frédéric Ducongé

    2011-09-01

    Full Text Available Aptamers are nucleic acid-based ligands identified through a process of molecular evolution named SELEX (Systematic Evolution of Ligands by Exponential enrichment. During the last 10-15 years, numerous aptamers have been developed specifically against targets present on or associated with the surface of human cells or infectious pathogens such as viruses, bacteria, fungi or parasites. Several of the aptamers have been described as potent probes, rivalling antibodies, for use in flow cytometry or microscopy. Some have also been used as drugs by inhibiting or activating functions of their targets in a manner similar to neutralizing or agonistic antibodies. Additionally, it is straightforward to conjugate aptamers to other agents without losing their affinity and they have successfully been used in vitro and in vivo to deliver drugs, siRNA, nanoparticles or contrast agents to target cells. Hence, aptamers identified against cell surface biomarkers represent a promising class of ligands. This review presents the different strategies of SELEX that have been developed to identify aptamers for cell surface-associated proteins as well as some of the methods that are used to study their binding on living cells.

  18. Plastic-casting intrinsic-surface unique identifier (tag)

    International Nuclear Information System (INIS)

    Palm, R.G.; De Volpi, A.

    1995-04-01

    This report describes the development of an authenticated intrinsic-surf ace tagging method for unique- identification of controlled items. Although developed for control of items limited by an arms control treaty, this method has other potential applications to keep track of critical or high-value items. Each tag (unique-identifier) consists of the intrinsic, microscopic surface topography of a small designated area on a controlled item. It is implemented by making a baseline plastic casting of the designated tag area and usually placing a cover (for example, a bar-code label) over this area to protect the surface from environmental alteration. The plastic casting is returned to a laboratory and prepared for high-resolution scanning electron microscope imaging. Several images are digitized and stored for use as a standard for authentication of castings taken during future inspections. Authentication is determined by numerically comparing digital images. Commercially available hardware and software are used for this tag. Tag parameters are optimized, so unique casting images are obtained from original surfaces, and images obtained from attempted duplicate surfaces are detected. This optimization uses the modulation transfer function, a first principle of image analysis, to determine the parameters. Surface duplication experiments confirmed the optimization

  19. Forest owners' timber sales satisfaction

    International Nuclear Information System (INIS)

    Pammo, R.; Ripatti, P.

    2003-01-01

    The TTS Institute has carried out a study concerning forest owners' timber sales. The material was collected in 2002 via a mail inquiry that targeted forest owners who sold timber during the years 1997-1999 and 1999-2002. Three quarters of the forest owners sold timber to the same timber buying company during both periods of 1997-1999 and 1999-2002. The most important reasons for selling to the same buyer were that they purchased all timber assortments, reliability and good timber price. Mainly the same reasons also applied when changing the timber buying company. The most sensitive groups to changing timber buyer were 60-69 year old, entrepreneurs, men, and owners of forest holdings between 20-29 hectares, owners of inherited forests and joint forest ownerships. The forest owners assessed the timber buying company's operations and its staff on the basis of the last timber sale. The forest owners gave best values for the timber buyer's reliability, the purchase of all timber assortments and the timber buyers' reputation. The worst values were given for cross-cutting and response to complaints. No less than 95 percent of forest owners were prepared to recommend their timber trade partner to acquaintances, friends or other forest owners. Yet only half of the forest owners recognized that their last timber sale experience would not affect which company will be selected for the nest timber sale process

  20. Timber Products Supply and Demand

    Science.gov (United States)

    Jeffrey P. Prestemon; Robert C. Abt

    2002-01-01

    This chapter describes historical, current, and projected timber inventories and timber product outputs from southern forests. It also attempts to place these quantities in national and international perspectives. Timber is the most valuable commercial commodity taken from most forests, and its removal strongly influences the character of those forests. Timber is...

  1. Timber in Bridge Structures

    OpenAIRE

    Detkin, Viktoria

    2016-01-01

    The purpose of this final year project was to study the properties of timber as a structural material and the suitability of wood in load bearing members for bridge structures. For a case study, an existing timber bridge was selected. Due to its condition the bridge should be replaced. The design of a new bridge with steel beams holding a glulam deck was made. During the case study the replacement of steel beams by glulam timber ones was discussed. Some calculations were made in order to ...

  2. The Dendrochronological Dating of Timber Crossings in West Jutland, Denmark

    DEFF Research Database (Denmark)

    Daly, Aoife

    2006-01-01

    The dendrochronological analyses of a large number of timbers from two sites are described. Nybro causeway in west Jutland, Denmark, which was built in the 8th century AD, consists of numerous phases, identifiable due to the large number of dendrochronologically dated timbers, of which many had...

  3. On several parameters of mechanized timbering for working faces

    Energy Technology Data Exchange (ETDEWEB)

    Klorik' yan, S Kh

    1979-08-01

    Opinion is expressed that the two basic parameters characterizing mechanical timbers, the specific force in ton-forces per square meter of the supported roof surface over the working area and the one-meter length of installed timbering, do not permit selection of the optimum type of timber for a roof of the corresponding class. Experience has demonstrated that the most precise parameter is specific strength of the timber in ton-forces per meter and the determined ratio of the strength of all posts in a section to spacing of the section along the longwall. Also an operating width not exceeding 0.4 meter should serve as a criterion for using timbers on unstable hanging walls. (In Russian)

  4. Timber resources of southwest Oregon.

    Science.gov (United States)

    Patricia M. Bassett

    1979-01-01

    This report presents statistics from a 1973 inventory of timber resources of Douglas County and from a 1974 inventory of timber resources of Coos, Curry, Jackson, and Josephine Counties, Oregon. Tables presented are of forest area and of timber volume, growth, and mortality.

  5. Timber frame walls

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan de Place; Brandt, Erik

    2010-01-01

    A ventilated cavity is usually considered good practice for removing moisture behind the cladding of timber framed walls. Timber frame walls with no cavity are a logical alternative as they are slimmer and less expensive to produce and besides the risk of a two-sided fire behind the cladding....... It was found that the specific damages made to the vapour barrier as part of the test did not have any provable effect on the moisture content. In general elements with an intact vapour barrier did not show a critical moisture content at the wind barrier after four years of exposure....

  6. Architectural and structural qualities in timber joints

    DEFF Research Database (Denmark)

    Christensen, Jesper Thøger; Christensen, Mogens Fiil; Damkilde, Lars

    2016-01-01

    Design of joints in timber structures is crucial to reach both elegant and structural efficient designs. Design of joints should therefore be an integral part of the conceptual design phase. Traditionally this is not the case, and joints are often solely designed and analysed in the engineering...... but also increase timbers competitiveness in the building industry. The paper is part of an ongoing research project aiming at providing tools for an integrated design process for timber structures. The focus of the paper is to identify how structure and its joints contributes to architecture and vice...... design phase. The result is joints that function structurally but do not add value to the design, and may even compromise the architectural ideas. With an approach, integrating both structural and architectural design from the beginning, one should not only gain better structures and architecture...

  7. Development of Hybrid Kiln Drying System with Radio Frequency Heating for the Sugi Heart Timber

    OpenAIRE

    Piao, Jinji; Fujimoto, Noboru; Yamamoto, Yasushi; Nagata, Soji

    2007-01-01

    In this study, proper applied stage of the radio-frequency (RF) heating during kiln drying based on the quality concerning the surface checks of the boxed heart timbers was examined. At the stage of the RF heating the moisture contents decreased clearly at the internal parts of timbers. The surface stress of the sugi (Cryptomeria japonica D. Don) boxed heart timber changed into the compression stress by the RF heating in any drying stage. The surface checks increased according to the decrease...

  8. Design of timber groynes

    NARCIS (Netherlands)

    Perdok, U.; Crossman, M.; Verhagen, H.J.; Howard, S.; Simm, J.

    2003-01-01

    The performance and durability of timber groynes (or 'groins') is highly dependent on the design and detailing of the structure. Using knowledge and experience developed over generations an effective functional design can be achieved, which may ultimately result in lower whole life costs and provide

  9. Industrialized timber structures.

    Science.gov (United States)

    1974-01-01

    It was recently learned that a number of innovations in structural timber components are available to the construction industry, but that they were largely unknown to bridge designers. The purpose of this study was to develop for the Department a fea...

  10. Growing Timber Structures

    DEFF Research Database (Denmark)

    Tamke, Martin; Evers, Henrik Leander; Stasiuk, David

    2013-01-01

    The contemporary design of timber structures has to answer questions concerning structural stability, production impact and energy implications in ever earlier stages. The interrelation of these levels creates a complexity that is difficult to resolve through contemporary linear parametric...... to integrate the behaviour of networked systems into structures made from wooden material....

  11. The 1993 RPA timber assessment update

    Science.gov (United States)

    Richard W. Haynes; Darius M. Adams; John R. Mills

    1995-01-01

    This update reports changes in the Nation's timber resource since the 1989 RPA timber assessment. The timber resource situation is analyzed to provide projections for future cost and availability of timber products to meet demands. Prospective trends in demands for and supplies of timber, and the factors that affect these trends are examined. These include changes...

  12. Global sustainable timber supply and demand

    Science.gov (United States)

    Peter J. Ince

    2010-01-01

    Industrial timber use has provided timber revenue that has helped make timber supply and demand more sustainable in the leading timber producing regions of the world. Sustainable development implies not consuming more resources today than we can replace tomorrow, but sustainable forest management implies more than merely a non-declining supply of timber. Forests as a...

  13. Timber resources of Ohio

    Science.gov (United States)

    Neal P. Kingsley; Carl E. Mayer

    1970-01-01

    Under the authority of the McSweeney-McNary Forest Research Act of May 22, 1928, and subsequent amendments, the Forest Service, U. S. Department of Agriculture, conducts a series of continuing forest surveys of all states to provide up-to-date information about the forest resources of the Nation. A resurvey of the timber resources of Ohio was made in 1966 and 1967 by...

  14. Historic timber roof structures

    OpenAIRE

    Magina, Miguel Jorge

    2013-01-01

    Dissertação para obtenção do Grau de Mestre em Engenharia Civil – Estruturas e Geotecnia This dissertation covers the study of historic timber roof structures in Transylvania area - Romania, the structures type, its elements and connection variety between them. Procedures to study a structure of this category are approached. It is also referred semi and non-destructive tests that can be done to better understand the present wood characteristics, and potential reparation or strengthening...

  15. Curved Folded Plate Timber Structures

    OpenAIRE

    Buri, Hans Ulrich; Stotz, Ivo; Weinand, Yves

    2011-01-01

    This work investigates the development of a Curved Origami Prototype made with timber panels. In the last fifteen years the timber industry has developed new, large size, timber panels. Composition and dimensions of these panels and the possibility of milling them with Computer Numerical Controlled machines shows great potential for folded plate structures. To generate the form of these structures we were inspired by Origami, the Japanese art of paper folding. Common paper tessellations are c...

  16. Monitoring of timber structures: Editorial

    OpenAIRE

    Kurz, Jochen Horst

    2015-01-01

    Timber structures have been in use for centuries, with proven durability. In recent years, timber has become particularly important, due to its standing as a truly renewable material for construction and carbon storage purposes. The material behaviour of wood is known and understood. The current design concepts for timber structures are also well developed. Nevertheless, the underlying processes of the ageing and deterioration of wood are complex, and the anisotropic structure of wood require...

  17. A Method to Identify Flight Obstacles on Digital Surface Model

    Institute of Scientific and Technical Information of China (English)

    ZHAO Min; LIN Xinggang; SUN Shouyu; WANG Youzhi

    2005-01-01

    In modern low-altitude terrain-following guidance, a constructing method of the digital surface model (DSM) is presented in the paper to reduce the threat to flying vehicles of tall surface features for safe flight. The relationship between an isolated obstacle size and the intervals of vertical- and cross-section in the DSM model is established. The definition and classification of isolated obstacles are proposed, and a method for determining such isolated obstacles in the DSM model is given. The simulation of a typical urban district shows that when the vertical- and cross-section DSM intervals are between 3 m and 25 m, the threat to terrain-following flight at low-altitude is reduced greatly, and the amount of data required by the DSM model for monitoring in real time a flying vehicle is also smaller. Experiments show that the optimal results are for an interval of 12.5 m in the vertical- and cross-sections in the DSM model, with a 1:10 000 DSM scale grade.

  18. Timber management planning with timber ram and goal programming

    Science.gov (United States)

    Richard C. Field

    1978-01-01

    By using goal programming to enhance the linear programming of Timber RAM, multiple decision criteria were incorporated in the timber management planning of a National Forest in the southeastern United States. Combining linear and goal programming capitalizes on the advantages of the two techniques and produces operationally feasible solutions. This enhancement may...

  19. Timber floors strengthened with concrete

    NARCIS (Netherlands)

    Blass, H.J.; Linden, M.L.R. van der; Schlager, M.

    1998-01-01

    Timber-concrete composite (tcc) beams may be used for the renovation of old timber floors. Although these systems are not new (Pokulka, 1997) and form a simple and practical solution, they are not widely adopted. One of the reasons for this is the Jack of uniform design rules. In this research

  20. Timber designers' manual

    CERN Document Server

    Ozelton, E C

    2008-01-01

    This major reference manual covers both overall and detail design of structural timber, including aspects such as shear deflection, creep, dynamic and lateral stability considerations for flexural members.Available for the first time in paperback, the Third Edition was substantially revised to take account of the many changes since the previous edition was published in 1984. It is based on British Standard BS 5268-2: 2002, which brought design concepts closer to European practice and Eurocode 5.Features of the Third Edition include:* information on bolt values including

  1. Computer Vision for Timber Harvesting

    DEFF Research Database (Denmark)

    Dahl, Anders Lindbjerg

    The goal of this thesis is to investigate computer vision methods for timber harvesting operations. The background for developing computer vision for timber harvesting is to document origin of timber and to collect qualitative and quantitative parameters concerning the timber for efficient harvest...... segments. The purpose of image segmentation is to make the basis for more advanced computer vision methods like object recognition and classification. Our second method concerns image classification and we present a method where we classify small timber samples to tree species based on Active Appearance...... to the development of the logTracker system the described methods have a general applicability making them useful for many other computer vision problems....

  2. Probabilistic modeling of timber structures

    DEFF Research Database (Denmark)

    Köhler, Jochen; Sørensen, John Dalsgaard; Faber, Michael Havbro

    2007-01-01

    The present paper contains a proposal for the probabilistic modeling of timber material properties. It is produced in the context of the Probabilistic Model Code (PMC) of the Joint Committee on Structural Safety (JCSS) [Joint Committee of Structural Safety. Probabilistic Model Code, Internet...... Publication: www.jcss.ethz.ch; 2001] and of the COST action E24 ‘Reliability of Timber Structures' [COST Action E 24, Reliability of timber structures. Several meetings and Publications, Internet Publication: http://www.km.fgg.uni-lj.si/coste24/coste24.htm; 2005]. The present proposal is based on discussions...... and comments from participants of the COST E24 action and the members of the JCSS. The paper contains a description of the basic reference properties for timber strength parameters and ultimate limit state equations for timber components. The recommended probabilistic model for these basic properties...

  3. Case Studies on Timber Defects of Selected Traditional Houses in Malacca

    Directory of Open Access Journals (Sweden)

    Nor Haniza Ishak

    2007-12-01

    Full Text Available The effect of adverse environmental conditions on building materials and the extent of damage caused depends on both the materials used and the environmental conditions. Although timber is a diminishing resource, it is still widely used in today's construction. In Malaysia, timber is one of the main components of many historic buildings. Appropriate maintenance of such buildings requires an understanding of timber defects and its related problems. Timber defects are classified into two major groups: non-biological and biological deteriorations. Non-biological deterioration consists of physical decay, excessive moisture content, dimensional instability and chemical deterioration. These defects are mainly caused by the timber in service being subjected to environmental exposure. The most common and destructive timber biological deteriorations are those due to dry rot, we t rot as well as insect attacks . A study based on seven selected houses was conducted to identify the most common building defects, specifically on timber components amongst traditional Malay houses in Malacca, Malaysia, A building condition survey was carried out to determine the effect of the environment towards timber buildings and their main components. Data collected were based on the investigation and visual observation of the selected case studies. Findings of this research will serve as an indicator towards maintaining the buildings' timber components in good condition in order that the buildings' life span could be extended and primarily to conserve the valuable traditional timber houses in a historical city.

  4. The impact of ultraviolet radiation on timber

    International Nuclear Information System (INIS)

    Dawson, B.

    1993-01-01

    Photochemical degradation of timber, the outcome of exposure of timber to ultraviolet radiation, is a light induced chemical and physical decay. Timber is a collection of dead wood cells. Impacts of radiation on the growing tree are therefore outside the scope of this paper, which is primarily concerned with timber as a material. (author). 5 refs. 2 figs

  5. Probabilistic Modeling of Timber Structures

    DEFF Research Database (Denmark)

    Köhler, J.D.; Sørensen, John Dalsgaard; Faber, Michael Havbro

    2005-01-01

    The present paper contains a proposal for the probabilistic modeling of timber material properties. It is produced in the context of the Probabilistic Model Code (PMC) of the Joint Committee on Structural Safety (JCSS) and of the COST action E24 'Reliability of Timber Structures'. The present...... proposal is based on discussions and comments from participants of the COST E24 action and the members of the JCSS. The paper contains a description of the basic reference properties for timber strength parameters and ultimate limit state equations for components and connections. The recommended...

  6. Robustness Evaluation of Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; čizmar, D.

    2010-01-01

    The present paper outlines results from working group 3 (WG3) in the EU COST Action E55 – ‘Modelling of the performance of timber structures’. The objectives of the project are related to the three main research activities: the identification and modelling of relevant load and environmental...... exposure scenarios, the improvement of knowledge concerning the behaviour of timber structural elements and the development of a generic framework for the assessment of the life-cycle vulnerability and robustness of timber structures....

  7. Timber bridge evaluation : a global nondestructive approach using impact generated FRFs

    Science.gov (United States)

    Angus Morison; C.D. Van Karsen; H.A. Evensen; J.B. Ligon; J.R. Erickson; R.J. Ross; J.W. Forsman

    2002-01-01

    Bridges require periodic inspections to ensure the safety of those using the structure. A visual inspection has historically been the most common form of investigation for timber bridges. This poses many problems when inspecting bridge timbers since often the damage is internal, leaving no visible signs of decay on the surface. Localized nondestructive evaluation (NDE...

  8. Hinged roof timber

    Energy Technology Data Exchange (ETDEWEB)

    Shestov, P I; Golub, A G; Yefremov, V I

    1980-08-07

    A hinged roof timer is suggested which includes a beam with prong and loop on the end which have openings in the form of ring slits for the distance wedges and round for the pins. In this case the opening of the distance wedge in the ring is arranged in relation to the opening for the pin closer to the end of the beam, and in the prong, in the opposite order. In order to improve the operating quality by guaranteeing active support of the cantilever roof timber without increasing its overall dimensions for the height of the opening for the distance wedge in the prong and the ring, beams are arranged axisymmetrically to the longitudinal axis.

  9. Grip for sawing round timber

    Energy Technology Data Exchange (ETDEWEB)

    1982-07-01

    This paper describes a device development at Gedling Colliery, Nottinghamshire Area, United Kingdom. It is a gripping attachment, designed to overcome the safety hazards involved in cross cutting timbers with a circular saw.

  10. FRP reinforcement of timber structures

    OpenAIRE

    Schober, Kay-Uwe; Harte, Annette M.; Kliger, Robert; Jockwer, Robert; Xu, Qingfeng; Chen, Jian-Fei

    2015-01-01

    Timber engineering has advanced over recent decades to offer an alternative to traditional materials and methods. The bonding of fibre reinforced plastics (FRP) with adhesives to timber structures for repair and strengthening has many advantages. However, the lack of established design rules has strongly restrained the use of FRP strengthening in many situations, where these could be a preferable option to most traditional techniques. A significant body of research has been carried out in rec...

  11. characterisation and grading of two selected timber species grown

    African Journals Online (AJOL)

    HOD

    Structural timber is the timber used in framing and load bearing ... The main challenge in design with timber as structural member is to .... is the classification of timber based on particular ..... Azadirachta indica leaf extract on serum lipid profile.

  12. Pre-Stressing Timber-Based Plate Tensegrity Structures

    DEFF Research Database (Denmark)

    Falk, Andreas; Kirkegaard, Poul Henning

    2012-01-01

    Tensile structures occur in numerous varieties utilising combinations of tension and compression. Introducing structural plates in the basic tensegrity unit and tensegric assemblies varies the range of feasible topologies and provides the structural system with an integrated surface. The present...... paper considers the concept of plate tensegrity based on CLT plates (cross-laminated timber). It combines the principles of tensegrity with the principles of plate shells and is characterised by a plate shell stabilised by struts and cables. The paper deals with material aspects and robustness of timber...

  13. Timber resource statistics for southwest Washington.

    Science.gov (United States)

    Patricia M. Bassett; Daniel D. Oswald

    1981-01-01

    This report summarizes a 1978 timber-resource inventory of six counties in southwest Washington: Clark, Cowlitz, Lewis, Pacific, Skamania, and Wahkiakum. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

  14. Timber resource statistics for eastern Washington.

    Science.gov (United States)

    Patricia M. Bassett; Daniel D. Oswald

    1983-01-01

    This report summarizes a 1980 timber resource inventory of the 16 forested counties in Washington east of the crest of the Cascade Range. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

  15. Cell Surface Proteome of Dental Pulp Stem Cells Identified by Label-Free Mass Spectrometry.

    Directory of Open Access Journals (Sweden)

    Christian Niehage

    Full Text Available Multipotent mesenchymal stromal cells (MSCs are promising tools for regenerative medicine. They can be isolated from different sources based on their plastic-adherence property. The identification of reliable cell surface markers thus becomes the Holy Grail for their prospective isolation. Here, we determine the cell surface proteomes of human dental pulp-derived MSCs isolated from single donors after culture expansion in low (2% or high (10% serum-containing media. Cell surface proteins were tagged on intact cells using cell impermeable, cleavable sulfo-NHS-SS-biotin, which allows their enrichment by streptavidin pull-down. For the proteomic analyses, we first compared label-free methods to analyze cell surface proteomes i.e. composition, enrichment and proteomic differences, and we developed a new mathematical model to determine cell surface protein enrichment using a combinatorial gene ontology query. Using this workflow, we identified 101 cluster of differentiation (CD markers and 286 non-CD cell surface proteins. Based on this proteome profiling, we identified 14 cell surface proteins, which varied consistently in abundance when cells were cultured under low or high serum conditions. Collectively, our analytical methods provide a basis for identifying the cell surface proteome of dental pulp stem cells isolated from single donors and its evolution during culture or differentiation. Our data provide a comprehensive cell surface proteome for the precise identification of dental pulp-derived MSC populations and their isolation for potential therapeutic intervention.

  16. The timber resources of Rhode Island

    Science.gov (United States)

    Roland H. Ferguson; John R. McGuire; John R. McGuire

    1957-01-01

    This is a report on the first comprehensive survey ever made of the timber resources of Rhode Island. It shows, for the years 1952 and 1953, the area and condition of the forest land, the volume and quality of standing timber, the rates of timber growth and mortality, and the extent of timber cutting for forest products. The survey was made by the Forest Service as...

  17. Collapse Analysis of Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2008-01-01

    of Structures and a probabilistic modelling of the timber material proposed in the Probabilistic Model Code (PMC) of the Joint Committee on Structural Safety (JCSS). Due to the framework in the Danish Code the timber structure has to be evaluated with respect to the following criteria where at least one shall...... to criteria a) and b) the timber frame structure has one column with a reliability index a bit lower than an assumed target level. By removal three columns one by one no significant extensive failure of the entire structure or significant parts of it are obtained. Therefore the structure can be considered......A probabilistic based collapse analysis has been performed for a glulam frame structure supporting the roof over the main court in a Norwegian sports centre. The robustness analysis is based on the framework for robustness analysis introduced in the Danish Code of Practice for the Safety...

  18. The 2005 RPA timber assessment update.

    Science.gov (United States)

    Richard W. Haynes; Darius M. Adams; Ralph J. Alig; Peter J. Ince; John R. Mills; Xiaoping. Zhou

    2007-01-01

    This update reports changes in the Nation's timber resource since the Analysis of the Timber Situation in the United States was completed in 2003. Prospective trends in demands for and supplies of timber, and the factors that affect these trends are examined. These trends include changes in the U.S. economy, increased salvage of British Columbia beetle-killed...

  19. Control of borens in mine timbers

    Energy Technology Data Exchange (ETDEWEB)

    Yule, R A; Kennedy, M J

    1978-07-01

    The authors studied timber attack in Queensland mines by auger beetles and powder post beetles. When infested timber is taken into a mine the insects thrive at the temperatures (20 to 25 C) and relative humidities (70-90%) they encounter. Seven timber treatments were tested, and all were satisfactory except spraying with wood-preserving oil which contained a moderately effective insecticide.

  20. General notes on ductility in timber structures

    NARCIS (Netherlands)

    Jorissen, A.J.M.; Fragiacomo, M.

    2011-01-01

    The paper discusses the implications of ductility in design of timber structures under static and dynamic loading including earthquakes. Timber is a material inherently brittle in bending and in tension, unless reinforced adequately. However connections between timber members can exhibit significant

  1. Timber resource statistics for eastern Washington, 1995.

    Science.gov (United States)

    Neil McKay; Patricia M. Bassett; Colin D. MacLean

    1995-01-01

    This report summarizes a 1990-91 timber resource inventory of Washington east of the crest of the Cascade Range. The inventory was conducted on all private and public lands except National Forests. Timber resource statistics from National Forest inventories also are presented. Detailed tables provide estimates of forest area, timber volume, growth, mortality, and...

  2. 36 CFR 261.6 - Timber and other forest products.

    Science.gov (United States)

    2010-07-01

    ... such product is identified as required in such permit or contract. (f) Selling or exchanging any timber... 74 FR 26091, June 1, 2009, the amendment was delayed indefinitely. For the convenience of the user..., memorandum of agreement, memorandum of understanding, or personal-use authorization (f) Selling or exchanging...

  3. Evaluation of recycled timber members

    Science.gov (United States)

    Douglas R. Rammer

    1999-01-01

    An experimental study was conducted to evaluate the residual shear capacity of large Douglas-fir timbers used in a military facility in Ardeen Hills, MN. A S-point and 4-point bending test was used to determine the effects of checks and splits on the shear strength capacity. Experimental results are compared to past shear and flexural studies.

  4. Timber management opportunities in Pennsylvania

    Science.gov (United States)

    Henry H. Webster

    1960-01-01

    The Pennsylvania Department of Forests and Waters serves the people in managing state forest lands and in helping private owners manage their forest lands. To produce more timber from Pennsylvania forests, the Department applies many different forestry practices. But the more effort it spends in one direction, the less it can spend in others. So the Department must...

  5. Timber resource statistics for Oregon.

    Science.gov (United States)

    Sally Campbell; Paul Dunham; David. Azuma

    2004-01-01

    This report is a summary of timber resource statistics for all ownerships in Oregon. Data were collected as part of several statewide multiresource inventories, including those conducted by the Pacific Northwest Region (Region 6) on National Forest System lands in Oregon, by the Bureau of Land Management (BLM) on BLM lands in western Oregon, and by the Pacific...

  6. Timber value—a matter of choice: a study of how end use assumptions affect timber values.

    Science.gov (United States)

    John H. Beuter

    1971-01-01

    The relationship between estimated timber values and actual timber prices is discussed. Timber values are related to how, where, and when the timber is used. An analysis demonstrates the relative values of a typical Douglas-fir stand under assumptions about timber use.

  7. System Reliability of Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2010-01-01

    elements, alternate load path(s) etc. in the structural design. In general these characteristics can have a positive influence on system reliability of a structure however, in Eurocodes ductility is only awarded for concrete and steel structures but not for timber structures. It is well......-know that structural systems can redistribute internal forces due to ductility of a connection, i.e. some additional loads can be carried by the structure. The same effect is also possible for reinforced concrete structures and structures of steel. However, for timber structures codes do not award that ductility......For reduction of the risk of collapse in the event of loss of structural element(s), a structural engineer may take necessary steps to design a collapse-resistant structure that is insensitive to accidental circumstances e.g. by incorporating characteristics like redundancy, ties, ductility, key...

  8. Robustness Analyses of Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; Hald, Frederik

    2013-01-01

    The robustness of structural systems has obtained a renewed interest arising from a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. In order to minimise the likelihood of such disproportionate structural failures, many mo...... with respect to robustness of timber structures and will discuss the consequences of such robustness issues related to the future development of timber structures.......The robustness of structural systems has obtained a renewed interest arising from a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. In order to minimise the likelihood of such disproportionate structural failures, many...... modern building codes consider the need for the robustness of structures and provide strategies and methods to obtain robustness. Therefore, a structural engineer may take necessary steps to design robust structures that are insensitive to accidental circumstances. The present paper summaries issues...

  9. Implementing CITES regulations for timber.

    Science.gov (United States)

    Blundell, Arthur G

    2007-03-01

    Foresters are currently confronted with a new challenge. For the first time a commonly traded timber species has been listed on the Convention on International Trade in Endangered Species of Wild Fauna and Flora (CITES). At the 12th Conference of the Parties in November 2002, countries voted 68 to 30 to place the premier timber species of Latin America, big-leaf mahogany (Swietenia macrophylla King [Meliaceae]), on CITES Appendix II. Under Appendix II regulations, trade in mahogany requires that exporting countries verify that each shipment was legally obtained and that its harvest was non-detrimental to the survival of the species. Unfortunately, implementation has been weak, in part because countries have yet to develop a common, pragmatic, cost-effective system to make the legal and non-detriment findings. This paper recommends what such a system might include.

  10. Multi-objective room acoustic optimization of timber folded plate structure

    DEFF Research Database (Denmark)

    Skov, Rasmus; Parigi, Dario; Damkilde, Lars

    2017-01-01

    This paper investigates the application of multi-objective optimization in the design of timber folded plate structures in the scope of the architectural design process. Considering contrasting objectives of structural displacement, early decay time (EDT), clarity (C50) and sound strength (G......), the methodology applied in two benchmarks tests, encompasses both structural and acoustic performance when determining folding characteristics and directionality of surfaces in a timber folded plate structure....

  11. Forests, timber and rural livelihoods

    DEFF Research Database (Denmark)

    Hansen, Christian Pilegaard; Pouliot, Mariève; Marfo, Emmanuel

    2015-01-01

    Based on detailed income data of 478 rural households, the nexus between forest, trees and rural livelihoods in Ghana is investigated and applied to assess implications of the Voluntary Partnership Agreement (VPA) between the EU and Ghana on illegal logging. It is found that, after crops...... and benefits to trees on farm and fallow land to those occupying and cultivating the land. Such efforts would provide incentive for timber production and thus enhance rural livelihoods, while combatting illegal logging, deforestation and forest degradation....

  12. Can Structural Timber Foster Short Procurement Chains within Mediterranean Forests? A Research Case in Sardinia

    Directory of Open Access Journals (Sweden)

    Massimo Fragiacomo

    2015-06-01

    Full Text Available Background and Purpose: The aim of this paper is to present the idea of a timber short procurement chain as a means to provide an increased value to Mediterranean forests. It is based on the evidence that timber buildings are increasingly used for a number of reasons including sustainability, the speed of erection, and excellent structural and seismic performance. However, most of the timber currently used around the Mediterranean is imported from outside this area. Materials and Methods: The idea is to use the best part of the tree to produce timber boards, while all the remaining part of the tree including the production waste is used for energy production. Important issues to address are the generally low mechanical properties of locally-grown timber such as maritime pine in Sardinia, which would make some wood-based products such as glue-laminated timber not technically viable. Cross-laminated timber panels are a possible solution to this problem because this wood-based product is manufactured in such a way that even with low-quality timber boards it is possible to obtain a medium quality panel. The panel is made of layers of timber boards with the adjacent layers glued under pressure at a right angle. Another issue is the need to grade the local timber, for which a number of specimens must be tested to destruction in order to identify a visual or a machine-stress grading procedure. Last but not least, the panels must be tested to destruction to correlate their mechanical properties to the properties of the boards. Results: The preliminary mechanical tests carried out on Sardinia maritime pine confirm that the material is low-grade because it is characterized by large knots and a significant grain deviation. Nevertheless, when used in the cross-laminated panels, the properties are significantly improved due to the layout of the panel which reduces the influence of defects in the boards on the mechanical properties of the panel. Conclusions

  13. A Feasibility Study on Timber Damage Detection Using Piezoceramic-Transducer-Enabled Active Sensing

    Directory of Open Access Journals (Sweden)

    Jicheng Zhang

    2018-05-01

    Full Text Available In recent years, piezoelectric-based transducers and technologies have made significant progress towards structural health monitoring and damage evaluation for various metal and concrete structures. Timber is still commonly used as a construction material in practical engineering; however, there is a lack of research on the health monitoring of timber-based structures using piezoelectric-based transducers and methods. This paper conducts a feasibility study on timber damage detection using surface-mounted piezoelectric patches, which enable the stress-wave-based active sensing approach. Typical damage modes in timber frame structures, such as surface cracks and holes, were investigated in this study. In the active sensing approach, one piezoceramic transducer is used as an actuator to generate stress waves, which propagate along the surface of the timber structure, and other piezoceramic transducers function as sensors to detect the propagating stress waves. Defects, such as a crack or a hole, induce additional attenuation to the propagating stress wave. Based on this attenuation, the proposed method can detect the defects using the wavelet-packet-based damage index, demonstrating its implementation potential for real-time timber damage detection.

  14. Selection of Nepalese Timber for Small Wind Turbine Blade Construction

    DEFF Research Database (Denmark)

    Sinha, R.; Acharya, Parash; Freere, Peter

    2010-01-01

    , weathering effect on coatings, price, growth and availability of the timber. Mechanical properties such as Young's modulus of elasticity, breaking strength, breaking strain and Brinell's hardness of selected Nepalese timbers are presented. The effects of weathering on timbers without coating...

  15. Timber products output and timber harvests in Alaska: projections for 1992-2010.

    Science.gov (United States)

    D.J. Brooks; R.W. Haynes

    1994-01-01

    Projections of Alaska timber products output, the derived demand for raw material, and timber harvest by owner are developed from a trend-based analysis. By using a spread-sheet model, material flows in the Alaska forest sectorare fully accounted for. Demand for Alaska national forest timber is projected and depends on product output and harvest by other owners. Key...

  16. The Timber Resource Inventory Model (TRIM): a projection model for timber supply and policy analysis.

    Science.gov (United States)

    P.L. Tedder; R.N. La Mont; J.C. Kincaid

    1987-01-01

    TRIM (Timber Resource Inventory Model) is a yield table projection system developed for timber supply projections and policy analysis. TRIM simulates timber growth, inventories, management and area changes, and removals over the projection period. Programs in the TRIM system, card-by-card descriptions of required inputs, table formats, and sample results are presented...

  17. Identifying potential surface water sampling sites for emerging chemical pollutants in Gauteng Province, South Africa

    OpenAIRE

    Petersen, F; Dabrowski, JM; Forbes, PBC

    2017-01-01

    Emerging chemical pollutants (ECPs) are defined as new chemicals which do not have a regulatory status, but which may have an adverse effect on human health and the environment. The occurrence and concentrations of ECPs in South African water bodies are largely unknown, so monitoring is required in order to determine the potential threat that these ECPs may pose. Relevant surface water sampling sites in the Gauteng Province of South Africa were identified utilising a geographic information sy...

  18. IDENTIFYING SURFACE CHANGES ON HRSC IMAGES OF THE MARS SOUTH POLAR RESIDUAL CAP (SPRC

    Directory of Open Access Journals (Sweden)

    A. R. D. Putri

    2016-06-01

    Full Text Available The surface of Mars has been an object of interest for planetary research since the launch of Mariner 4 in 1964. Since then different cameras such as the Viking Visual Imaging Subsystem (VIS, Mars Global Surveyor (MGS Mars Orbiter Camera (MOC, and Mars Reconnaissance Orbiter (MRO Context Camera (CTX and High Resolution Imaging Science Experiment (HiRISE have been imaging its surface at ever higher resolution. The High Resolution Stereo Camera (HRSC on board of the European Space Agency (ESA Mars Express, has been imaging the Martian surface, since 25th December 2003 until the present-day. HRSC has covered 100 % of the surface of Mars, about 70 % of the surface with panchromatic images at 10-20 m/pixel, and about 98 % at better than 100 m/pixel (Neukum et. al., 2004, including the polar regions of Mars. The Mars polar regions have been studied intensively recently by analysing images taken by the Mars Express and MRO missions (Plaut et al., 2007. The South Polar Residual Cap (SPRC does not change very much in volume overall but there are numerous examples of dynamic phenomena associated with seasonal changes in the atmosphere. In particular, we can examine the time variation of layers of solid carbon dioxide and water ice with dust deposition (Bibring, 2004, spider-like channels (Piqueux et al., 2003 and so-called Swiss Cheese Terrain (Titus et al., 2004. Because of seasonal changes each Martian year, due to the sublimation and deposition of water and CO2 ice on the Martian south polar region, clearly identifiable surface changes occur in otherwise permanently icy region. In this research, good quality HRSC images of the Mars South Polar region are processed based on previous identification as the optimal coverage of clear surfaces (Campbell et al., 2015. HRSC images of the Martian South Pole are categorized in terms of quality, time, and location to find overlapping areas, processed into high quality Digital Terrain Models (DTMs and

  19. Strategies for Sustainable Development of Non-Timber Forest Products in Senegal

    OpenAIRE

    Sene, Abdou

    2001-01-01

    In recent years, forests have been increasingly recognized as rich reservoirs for many valuable biological resources. As a result of the devastation caused by drought, clearing land for agriculture, and overexploitation of timber, there has been a growing interest in non-timber forest products (NTFPs). The Senegal Forestry Action Plan, designed to ensure sustainable forest management, stresses the importance of identifying the constraints to and opportunities for sustainable development of no...

  20. Lsa63, a newly identified surface protein of Leptospira interrogans binds laminin and collagen IV.

    Science.gov (United States)

    Vieira, Monica L; de Morais, Zenaide M; Gonçales, Amane P; Romero, Eliete C; Vasconcellos, Silvio A; Nascimento, Ana L T O

    2010-01-01

    Leptospira interrogans is the etiological agent of leptospirosis, a zoonotic disease that affects populations worldwide. We have identified in proteomic studies a protein that is encoded by the gene LIC10314 and expressed in virulent strain of L. interrogans serovar Pomona. This protein was predicted to be surface exposed by PSORT program and contains a p83/100 domain identified by BLAST analysis that is conserved in protein antigens of several strains of Borrelia and Treponema spp. The proteins containing this domain have been claimed antigen candidates for serodiagnosis of Lyme borreliosis. Thus, we have cloned the LIC10314 and expressed the protein in Escherichia coli BL21-SI strain by using the expression vector pAE. The recombinant protein tagged with N-terminal hexahistidine was purified by metal-charged chromatography and characterized by circular dichroism spectroscopy. This protein is conserved among several species of pathogenic Leptospira and absent in the saprophytic strain L. biflexa. We confirm by liquid-phase immunofluorescence assays with living organisms that this protein is most likely a new surface leptospiral protein. The ability of the protein to mediate attachment to ECM components was evaluated by binding assays. The leptospiral protein encoded by LIC10314, named Lsa63 (Leptospiral surface adhesin of 63kDa), binds strongly to laminin and collagen IV in a dose-dependent and saturable fashion. In addition, Lsa63 is probably expressed during infection since it was recognized by antibodies of serum samples of confirmed-leptospirosis patients in convalescent phase of the disease. Altogether, the data suggests that this novel identified surface protein may be involved in leptospiral pathogenesis. 2009 The British Infection Society. Published by Elsevier Ltd. All rights reserved.

  1. Operability and location of Wisconsin's timber resource.

    Science.gov (United States)

    Jerold T. Hahn; Mark H. Hansen

    1989-01-01

    Data collected during the 1983 Wisconsin Statewide forest inventory were used to examine operability of the timber resource based on seven operability components. Operability is the ease or difficulty of managing or harvesting timber because of physical conditions in the stand or on the site.

  2. Timber resource of Missouri's Prairie, 1972.

    Science.gov (United States)

    Jerold T. Hahn; Alexander Vasilevsky

    1975-01-01

    The third timber inventory of Missouri's Prairie Forest Survey Unit shows substantial declines in both growing-stock and sawtimber volumes between 1959 and 1972. Commercial forest area declined by one-fifth. Presents highlights and statistics on forest area and timber volume, growth, mortality, ownership, and use in 1972.

  3. Operability and location of Michigan's timber resource.

    Science.gov (United States)

    Mark H. Hansen; Jerold T. Hahn

    1987-01-01

    Operability is the ease or difficulty of managing or harvesting timber because of physical conditions in the stand or on the site. Data collected during the 1980 Michigan statewide forest inventory were used to examine operability of the timber resource based on seven operability components.

  4. Timber price dynamics following a natural catastrophe

    Science.gov (United States)

    Jeffrey P. Prestemon; Thomas P. Holmes

    2000-01-01

    Catastrophic shocks to existing stocks of a renewable resource can cause long-run price shifts. With timber, these long-run price shifts may be accompanied by a short-run price drop due to salvage. Hurricane Hugo damaged 20 percent of southern pine timber in the South Carolina Coastal Plain in 1989. To estimate the...

  5. Tall timber building technologies in The Netherlands

    NARCIS (Netherlands)

    Jorissen, A.J.M.; Leijten, A.J.M.

    2008-01-01

    In the last few decades, structural timber for residential buildings has lost popularity because of problems related to floor vibrations, acoustics and fire resistance. In recent years, however, solutions to these problems have been developed and timber-framed housing is becoming increasingly

  6. Timber-concrete composite floor systems

    NARCIS (Netherlands)

    Linden, M.L.R. van der; Blass, H.J.

    1996-01-01

    Timber-concrete composite (tcc) beams may be used for the renovation of old timber floors. Although these systems are a simple and practical solution, they are not widely adopted. One of the reasons for this is the lack of uniform design mies. In this research programme shear tests on four different

  7. Optimal control of raw timber production processes

    Science.gov (United States)

    Ivan Kolenka

    1978-01-01

    This paper demonstrates the possibility of optimal planning and control of timber harvesting activ-ities with mathematical optimization models. The separate phases of timber harvesting are represented by coordinated models which can be used to select the optimal decision for the execution of any given phase. The models form a system whose components are connected and...

  8. Timber resource statistics for western Washington.

    Science.gov (United States)

    Coffin D. MacLean; Patricia M. Bassett; Glenn. Yeary

    1992-01-01

    This report summarizes a 1988-90 timber resource inventory of 19 counties in western Washington: Clallam, Clark, Cowlitz, Grays Harbor, Island, Jefferson, King, Kitsap, Lewis, Mason, Pacific, Pierce, San Juan, Skagit, Skamania, Snohomish, Thurston, Wahkiakum, and Whatcom. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

  9. Aesthetic Qualities of Cross Laminated Timber

    DEFF Research Database (Denmark)

    Bejder, Anne Kirkegaard

    to its sustainable profile. In parallel to this, new production methods and further refined timber products have been developed. Among these are the engineered timber-based product Cross Laminated Timber (CLT) that show enhanced structural properties compared to unrefined timber. However, the question...... an undefined aesthetic potential that may innovate how we construct and perceive timber architecture, the overall aim of the thesis is to inquire into the architectural and aesthetic qualities of CLT. Through three chapters this thesis examines and discusses 1) the architectural qualities of CLT, 2......) the materiality of CLT, and 3) how one can deal with these qualitative aspects in the design process. This leads to: firstly, the development of an explicit model to help structuring the analysis and evaluation of the materiality of CLT, and secondly, a clarification and articulation of the aesthetic qualities...

  10. Nailed timber beams with I composed section

    Directory of Open Access Journals (Sweden)

    Jorge Luís Nunes de Góes

    2003-01-01

    Full Text Available The employment of built-up timber beams, made of commercial dimensions pieces, is becoming increasingly important in timber structures in Brazil, mainly due to the ever-growing scarcity of timber elements in larger sizes. The built-up system has vast application, from beams for residential buildings to girders for small bridges. The objective of this work is the theoretical and experimental study of nailed timber beams with composed cross section I. The design procedure of EUROCODE 5/93 and NBR 7190/97 are shown and evaluated, as well as the theory about the subject matter. The experimental evaluation of the theoretical models was made by means of bending tests in prototypes of built-up timber beams. The obtained results shows that the EUROCODE 5/93 procedure is the most indicated for evaluating effective bending stiffness, normal and shear stresses as well as the load on fasteners.

  11. Reliability Analysis of Structural Timber Systems

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Hoffmeyer, P.

    2000-01-01

    Structural systems like timber trussed rafters and roof elements made of timber can be expected to have some degree of redundancy and nonlinear/plastic behaviour when the loading consists of for example snow or imposed load. In this paper this system effect is modelled and the statistic...... of variation. In the paper a stochastic model is described for the strength of a single piece of timber taking into account the stochastic variation of the strength and stiffness with length. Also stochastic models for different types of loads are formulated. First, simple representative systems with different...... types of redundancy and non-linearity are considered. The statistical characteristics of the load bearing capacity are determined by reliability analysis. Next, more complex systems are considered modelling the mechanical behaviour of timber roof elements I stressed skin panels made of timber. Using...

  12. Kernel density surface modelling as a means to identify significant concentrations of vulnerable marine ecosystem indicators.

    Directory of Open Access Journals (Sweden)

    Ellen Kenchington

    Full Text Available The United Nations General Assembly Resolution 61/105, concerning sustainable fisheries in the marine ecosystem, calls for the protection of vulnerable marine ecosystems (VME from destructive fishing practices. Subsequently, the Food and Agriculture Organization (FAO produced guidelines for identification of VME indicator species/taxa to assist in the implementation of the resolution, but recommended the development of case-specific operational definitions for their application. We applied kernel density estimation (KDE to research vessel trawl survey data from inside the fishing footprint of the Northwest Atlantic Fisheries Organization (NAFO Regulatory Area in the high seas of the northwest Atlantic to create biomass density surfaces for four VME indicator taxa: large-sized sponges, sea pens, small and large gorgonian corals. These VME indicator taxa were identified previously by NAFO using the fragility, life history characteristics and structural complexity criteria presented by FAO, along with an evaluation of their recovery trajectories. KDE, a non-parametric neighbour-based smoothing function, has been used previously in ecology to identify hotspots, that is, areas of relatively high biomass/abundance. We present a novel approach of examining relative changes in area under polygons created from encircling successive biomass categories on the KDE surface to identify "significant concentrations" of biomass, which we equate to VMEs. This allows identification of the VMEs from the broader distribution of the species in the study area. We provide independent assessments of the VMEs so identified using underwater images, benthic sampling with other gear types (dredges, cores, and/or published species distribution models of probability of occurrence, as available. For each VME indicator taxon we provide a brief review of their ecological function which will be important in future assessments of significant adverse impact on these habitats here

  13. Tree-mendous Timber Evaluation

    Science.gov (United States)

    2004-01-01

    Funded and administered by NASA, the Affiliated Research Center (ARC) program transfers geospatial technologies from the Space Agency and participating universities to commercial companies, non-profit and trade organizations, and tribal governments. The origins of the ARC program date back to 1988, when NASA's Stennis Space Center initiated the Visiting Investigator Program to bring industry closer to spatial information technologies. The success of this trial program led to an expansion into the ARC program, whose goal is to enhance competitiveness of U.S. industries through more efficient use of remote sensing and related technologies. NASA's ARC program served as the foundation for the development of International Hardwood Resources, which then grew into Falcon Informatics with the acquisition of a technology from a European software company and a change of business models. Doylestown, Pennsylvania-based Falcon Informatics is now a world-leading information services company that combines in-depth timber industry experience with state-of-the-art software to serve the needs of national governments, international paper companies, and timber-investment management organizations.

  14. Identifying plant cell-surface receptors: combining 'classical' techniques with novel methods.

    Science.gov (United States)

    Uebler, Susanne; Dresselhaus, Thomas

    2014-04-01

    Cell-cell communication during development and reproduction in plants depends largely on a few phytohormones and many diverse classes of polymorphic secreted peptides. The peptide ligands are bound at the cell surface of target cells by their membranous interaction partners representing, in most cases, either receptor-like kinases or ion channels. Although knowledge of both the extracellular ligand and its corresponding receptor(s) is necessary to describe the downstream signalling pathway(s), to date only a few ligand-receptor pairs have been identified. Several methods, such as affinity purification and yeast two-hybrid screens, have been used very successfully to elucidate interactions between soluble proteins, but most of these methods cannot be applied to membranous proteins. Experimental obstacles such as low concentration and poor solubility of membrane receptors, as well as instable transient interactions, often hamper the use of these 'classical' approaches. However, over the last few years, a lot of progress has been made to overcome these problems by combining classical techniques with new methodologies. In the present article, we review the most promising recent methods in identifying cell-surface receptor interactions, with an emphasis on success stories outside the field of plant research.

  15. A surface evolution scheme to identify nanoscale intrinsic geometry from AFM experimental data

    International Nuclear Information System (INIS)

    Jang, Hong-Lae; Kim, Hyun-Seok; Park, Youmie; Cho, Seonho

    2013-01-01

    The geometrical properties of metallic nanoparticles such as the size and morphology have significant impacts on the structure and stability of the adsorbed biological entities as well as the nanoscale structural performances. To identify the nanoscale intrinsic geometry from the height images by atomic force microscopy (AFM), we developed a curvature-dependent evolution scheme that can eliminate the noise and smoothen the surfaces. The principal curvatures are computed directly from the first and second derivatives of the discrete AFM height data. The principal curvatures and directions correspond to the eigenvalues and eigenvectors of shape operator matrix, respectively. The evolution equation using the principal curvature flows smoothens the images in the corresponding principal directions. For an idealized model, κ 2 flow successfully identifies the major valley lines to represent the boundary of nanoparticles without referring to the phase information, whereas the mean curvature flow eliminates all the minor ones leaving only the major feature of the boundary. To demonstrate the capability of noise removal, smoothing surfaces, the identification of ridge and valley lines, and the extraction of intrinsic geometry, the developed numerical scheme is applied to real AFM data that include the silver nanoparticles of 24 nm diameter and the gold nanoparticles of 33–56 nm diameters

  16. 36 CFR 223.32 - Timber sale operating plan.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Timber sale operating plan... SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER Timber Sale Contracts Contract Conditions and Provisions § 223.32 Timber sale operating plan. Sale contracts with a term of 2 years or more shall provide...

  17. Inventory analysis of the timber industry in Ghana

    NARCIS (Netherlands)

    Eshun, J.F.; Potting, J.; Leemans, R.

    2010-01-01

    Background, aim, and scope The timber sector, i.e., forestry and timber industry, plays an important role in the socioeconomic development of Ghana through timber products export. Timber production in this sector is associated with increasing environmental burdens in terms of use of materials and

  18. Structural Reliability of the Nigerian Grown Abura Timber Bridge ...

    African Journals Online (AJOL)

    Structural reliability analysis was carried out on the Nigerian grown Abura timber, to ascertain its structural performance as timber bridge beams. Samples of the Nigerian grown Abura timber were bought from timber market, seasoned naturally and their structural/strength properties were determined at a moisture content of ...

  19. Timber Price Dynamics Following a Natural Catastrophe

    OpenAIRE

    Jeffrey P. Prestemon; Thomas P. Holmes

    2000-01-01

    Catastrophic shocks to existing stocks of a renewable resource can cause long-run price shifts. With timber, these long-run price shifts may be accompanied by a short-run price drop due to salvage. Hurricane Hugo damaged 20% of southern pine timber in the South Carolina Coastal Plain in 1989. To estimate the short- and long-run effects of the hurricane on the prices of timber stocks, we estimated an intervention model of the residuals of cointegration of South Carolina sawtimber and pulpwood ...

  20. The Materiality of Novel Timber Architecture

    DEFF Research Database (Denmark)

    Bejder, Anne Kirkegaard; Kirkegaard, Poul Henning; Wraber, Ida Kristina

    2016-01-01

    In recent years, wood as a building material has gained renewed focus and, in parallel, new production methods and further refined timber products have been developed. Many of these novel timber building materials have gained significantly enhanced technical qualities, and the question is whether...... this is at the expense of wood’s sensuous and poetic qualities. The proposed method to deal with these questions is to develop a discursive model that can clarify aspects essential for analyzing and discussing the materiality of timber in its contemporary engineered forms. Firstly, this paper presents a theoretical...

  1. Multiple oncogenic viruses identified in Ocular surface squamous neoplasia in HIV-1 patients

    Directory of Open Access Journals (Sweden)

    Bisson Gregory

    2010-03-01

    Full Text Available Abstract Background Ocular surface squamous neoplasia (OSSN is a rare cancer that has increased in incidence with the HIV pandemic in Africa. The underlying cause of this cancer in HIV-infected patients from Botswana is not well defined. Results Tissues were obtained from 28 OSSN and 8 pterygia patients. The tissues analyzed from OSSN patients were 83% positive for EBV, 75% were HPV positive, 70% were KSHV positive, 75% were HSV-1/2 positive, and 61% were CMV positive by PCR. Tissues from pterygium patients were 88% positive for EBV, 75% were HPV positive, 50% were KSHV positive, and 60% were CMV positive. None of the patients were JC or BK positive. In situ hybridization and immunohistochemistry analyses further identified HPV, EBV, and KSHV in a subset of the tissue samples. Conclusion We identified the known oncogenic viruses HPV, KSHV, and EBV in OSSN and pterygia tissues. The presence of these tumor viruses in OSSN suggests that they may contribute to the development of this malignancy in the HIV population. Further studies are necessary to characterize the molecular mechanisms associated with viral antigens and their potential role in the development of OSSN.

  2. Reliability and Robustness Evaluation of Timber Structures

    DEFF Research Database (Denmark)

    Cizmar, Dean; Sørensen, John Dalsgaard; Kirkegaard, Poul Henning

    In the last few decades there have been intensely research concerning reliability of timber structures. This is primarily because there is an increased focus on society on sustainability and environmental aspects. Modern timber as a building material is also being competitive compared to concrete...... and steel. However, reliability models applied to timber were always related to individual components but not the systems. as any real structure is a complex system, system behaviour must be of a particular interest. In the chapter 1 of this document an overview of stochastic models for strength and loads...... (deterministic, probabilistic and risk based approaches) of the robustness are given. Chapter 3 deals more detailed with the robustness of timber structures....

  3. Statistical Analysis of Data for Timber Strengths

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Hoffmeyer, P.

    Statistical analyses are performed for material strength parameters from approximately 6700 specimens of structural timber. Non-parametric statistical analyses and fits to the following distributions types have been investigated: Normal, Lognormal, 2 parameter Weibull and 3-parameter Weibull...

  4. Extant contents of chromium, copper and arsenic in waste CCA-treated timber

    International Nuclear Information System (INIS)

    Chiba, Keiko; Uchida, Shinpei; Honma, Yoshinori; Sera, Koichiro; Saitoh, Katsumi

    2009-01-01

    The segregation and disposal of chromated copper arsenate (CCA)-treated wood waste when recycling building waste materials is a serious issue. We examined the contents of CCA preserved cedar timber by PIXE analysis. CCA preserved timber contained large amounts of these metals both on the surface and core of the wood. The ratio of chromium, copper and arsenic contained on the surface was 1:2:1, and in contrast, the ratio in the core was 1:1:2. In other words, the arsenic content was highest in the core. Moreover, the chemical form of arsenic in both parts of the wood was only inorganic arsenic; the same form of arsenic in preservative components known as carcinogenic substances. These findings mean that the complete separation of waste CCA preserved timber from construction and demolition wood is needed. (author)

  5. Profitability of timber harvesting and timber transportation enterprises

    International Nuclear Information System (INIS)

    Rajamaeki, J.

    1996-01-01

    In co-operation with the major companies contracting out forestry work and Statistics Finland, Metsaeteho carried out a project with the objective of analysing the economic profitability of timber harvesting and transportation enterprises in 1994. The calculation of profitability was based on utilisation of last livelihoods taxation data (EVR) that Statistics Finland was in possession of. The basic material comprised data that the companies contracting out forestry work had full-time entrepreneurs. There were 255 forestry machine contractor enterprises and 270 trucking enterprises. Statistics Finland was responsible for computations of the results of the project. The calculation of the indicators of profitability was based on the recommendations of Yritystutkimusneuvottelukunta, a committee looking into the functioning of enterprises. The year 1994 was a good year from the viewpoint of profitability of both forestry machine contractors as well as trucking enterprises. With full depreciations and salary adjustments attended to, both enterprise groups still showed a mean profitability of ca. 8 %. The yield of invested capital was ca. 25 %. The differences in profitability among enterprises were great in both groups and in different parts of the country

  6. Alabama's timber industry - an assessment of timber product output and use, 1995

    Science.gov (United States)

    Tony G. Johnson; Jim R. Gober; J. Stephen Nix

    1998-01-01

    Output of Industrial Timber Products.Note: The reader must understand that certain terms, namely-retained, export, import, production, and receipts-have specialized meanings and relationships. unique to the Forest Inventory and Analysis Units across the country that deal with timber products output.In 1995, the combined...

  7. Value of timber continues to increase

    International Nuclear Information System (INIS)

    Haluza, I.

    2007-01-01

    The state owned company, Lesy SR (state forests) enjoys great power in the timber industry. It can influence which timber processing companies in Slovakia will be successful and which will not have easy access to the raw material. It manages half of the forests in Slovakia. It is the only seller of timber in this country. Four years ago, the former cabinet appointed banker, Karol Vins, as the director of the company. And he started making changes. He centralized the timber business and thousands of people left the company. The goal was clear -to increase quality and efficiency. The economic performance of the company improved. The company has finally managed to post a profit. Last year, the government changed and so has the director of the company The former banker was replaced by a new head from a forestry research background, Jozef Mindas. He approves of some of the changes introduced by his predecessor and plans to continue implementing them, although there also those he would like to change. The new manager is not concerned regarding the big change from research where he used to work in the past to director of a big company and rejects the allegation that he was nominated by HZDS. I was approached as an expert and I won a tender. I have never been a member of a political party, he stated. He appreciates that his predecessor managed to revitalize the company, which was assisted by the positive effect of out-sourcing. But on the other hand, during transformation forests were not divided up correctly. The division into units did not always take into account the specific requirements of forestry, i.e. some employees in forest units have too much work and some, working in another forest unit, less. We have to make sure that the workload is approximately at the same level everywhere. He is aware of the fact that Lesy SR, which controls two thirds of the timber market, effectively decides which factory will succeed and which one will not. But he adds that Lesy SR do

  8. Impacts of timber harvesting on soil organic matter, nitrogen, productivity, and health of inland northwest forests

    Science.gov (United States)

    M. F. Jurgensen; A. E. Harvey; R. T. Graham; D. S. Page-Dumroese; J. R. Tonn; M. J. Larsen; T. B. Jain

    1997-01-01

    Soil organic components are important factors in the health and productivity of Inland Northwest forests. Timber harvesting and extensive site preparation (piling, windrowing, or scalping) reduces the amount of surface organic material (woody residues and forest floor layers) over large areas. Some wildfires and severe prescribed burns can have similar consequences....

  9. Reinforcement and recovery of timber structures

    Directory of Open Access Journals (Sweden)

    Antonio Alves Dias

    2006-02-01

    Full Text Available Preservation of timber structures is a reason for constant concern because their deterioration often involves compromising the historical patrimony, besides endangering the safety of the structure, and consequently, of their users. Many are the examples of churches, residences or other constructions where this manifestation is a fact. The technique of reinforcing structurally endangered pieces with the addition of natural or synthetic fibers, is an alternative that has been researched. In the group of synthetic fibers, fiberglass, carbon and aramid ones are included. On the other hand, it has been frequent in the restoration of old buildings, especially in Europe, the employment of materials that were not available in the past, aiming to achieve structural, acoustic and aesthetic benefits. On an existing timber structure floor, a concrete slab has been carried out, with an appropriate connection system among the parts, constituting the composite timber-concrete structures. This alternative has been considered as extraordinarily viable, because it gathers a series of convenience related with the durability and it presents better mechanic performance than conventional timber structures. In this work, the state-of-the-art of the use of fibers as structural reinforcement and of the timber-concrete composite structures, is presented.

  10. Development of Timber Property Classification Based on the End-Use with Reference to Twenty Sri Lankan Timber Species

    Directory of Open Access Journals (Sweden)

    ND Ruwanpathirana

    2014-06-01

    Full Text Available An investigation was carried out on selected 20 timber species of Sri Lanka to study different wood properties, i.e., wood density, modulus of rapture, modulus of elasticity, compression parallel to grain, shrinkage/movement, workability (sawing, nailing, sanding and finishing, treatability of preservative, timber durability, timber texture by vessel diameter and some gross properties, timber colour and present timber uses. Based on the results, an attempt was made to classify the studied timber species into property levels. The final objective of this study was to develop relationships between the end-uses of timber and their property requirements and levels with reference to 20 Sri Lankan timber species.   Timber selection for the use in Sri Lanka is species-oriented and sometimes it is based on the traditional use. Based on wood properties of 20 Sri Lankan timber species selected, an attempt was made to recognise the most important wood properties and their levels to develop a four end-use property classification. In general, the proposed end-use property classification in this study could be differentiated as (i. for building construction, (ii. for furniture and joinery (iii. for light construction, and (iv. for miscellaneous uses. Among the selected timber species, Dipterocarpus zeylanicus is eminently suitable for under-water work. Eucalyptus microcorys is regarded as one of the best timbers for dancing floors. These specialty and causative factors of timber, however, must be explored and documented in order to prepare end-use property classification for miscellaneous use.

  11. Economic implications of manufacturing sawed ties and timbers

    Science.gov (United States)

    Lawrence D. Garrett; Lawrence D. Garrett

    1969-01-01

    The purpose of this paper is to discuss those factors that affect the profitability of manufacturing timbers and show that the combined manufacture of both lumber and timbers will provide a greater daily income than the manufacture of lumber alone.

  12. Timber resource statistics for the Olympic Peninsula, Washington.

    Science.gov (United States)

    Patricia M. Bassett; Daniel D. Oswald

    1961-01-01

    This report summarizes a 1978-79 timber resource inventory of five counties in the Olympic Peninsula of Washington: Clallam, Grays Harbor, Jefferson, Mason, and Thurston. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

  13. Identifying anthropogenic anomalies in air, surface and groundwater temperatures in Germany.

    Science.gov (United States)

    Benz, Susanne A; Bayer, Peter; Blum, Philipp

    2017-04-15

    Human activity directly influences ambient air, surface and groundwater temperatures. The most prominent phenomenon is the urban heat island effect, which has been investigated particularly in large and densely populated cities. This study explores the anthropogenic impact on the thermal regime not only in selected urban areas, but on a countrywide scale for mean annual temperature datasets in Germany in three different compartments: measured surface air temperature, measured groundwater temperature, and satellite-derived land surface temperature. Taking nighttime lights as an indicator of rural areas, the anthropogenic heat intensity is introduced. It is applicable to each data set and provides the difference between measured local temperature and median rural background temperature. This concept is analogous to the well-established urban heat island intensity, but applicable to each measurement point or pixel of a large, even global, study area. For all three analyzed temperature datasets, anthropogenic heat intensity grows with increasing nighttime lights and declines with increasing vegetation, whereas population density has only minor effects. While surface anthropogenic heat intensity cannot be linked to specific land cover types in the studied resolution (1km×1km) and classification system, both air and groundwater show increased heat intensities for artificial surfaces. Overall, groundwater temperature appears most vulnerable to human activity, albeit the different compartments are partially influenced through unrelated processes; unlike land surface temperature and surface air temperature, groundwater temperatures are elevated in cultivated areas as well. At the surface of Germany, the highest anthropogenic heat intensity with 4.5K is found at an open-pit lignite mine near Jülich, followed by three large cities (Munich, Düsseldorf and Nuremberg) with annual mean anthropogenic heat intensities >4K. Overall, surface anthropogenic heat intensities >0K and

  14. Methodology for safety evaluation of existing timber elements

    OpenAIRE

    Sousa, Hélder S.

    2013-01-01

    Tese de doutoramento em Engenharia Civil The past decades have seen a renewed interest in timber research related topics. As instance, timber engineering is not only confined to the design of new construction with innovative wood based products, but also an increasing awareness for the preservation of existing timber structures is visible in nowadays society. Therefore, arises the need for a better understanding of timber performance as a construction material aiming at a bette...

  15. Probabilistic Modelling of Timber Material Properties

    DEFF Research Database (Denmark)

    Nielsen, Michael Havbro Faber; Köhler, Jochen; Sørensen, John Dalsgaard

    2001-01-01

    The probabilistic modeling of timber material characteristics is considered with special emphasis to the modeling of the effect of different quality control and selection procedures used as means for grading of timber in the production line. It is shown how statistical models may be established...... on the basis of the same type of information which is normally collected as a part of the quality control procedures and furthermore, how the efficiency of different control procedures may be compared. The tail behavior of the probability distributions of timber material characteristics play an important role...... such that they may readily be applied in structural reliability analysis and the format appears to be appropriate for codification purposes of quality control and selection for grading procedures...

  16. 36 CFR 223.62 - Timber purchaser road construction credit.

    Science.gov (United States)

    2010-07-01

    ... § 223.62 Timber purchaser road construction credit. Appraisal may also establish stumpage value as if... timber is appraised and sold on such basis, purchaser credit for road construction, not to exceed the estimated construction cost of such roads or other developments specified in the timber sale contract, shall...

  17. Safety of timber : An analysis of quality control options

    NARCIS (Netherlands)

    Kovryga, A.; Stapel, P.; Van de Kuilen, J.W.G.

    2014-01-01

    The quality assurance of timber properties is important for the safety of timber structures. In the current study, the quality control options of timber are analysed under the prism of the different growth regions. Therefore, these options - machine and output control - are simulated in accordance

  18. Modified traditional Japanese timber joint system with retrofitting abilities

    NARCIS (Netherlands)

    Shiratori, T.; Komatsu, K.; Leijten, A.J.M.

    2008-01-01

    Embedment is a key feature of timber joints envisioned as the ultimate solution in avoiding the devastating full collapse of timber structures in seismic countries. The Japanese traditional timber post-and-beam structural system utilizes moment-resisting joints based on embedment. Despite the

  19. Effect of timber supplies on the efficiency of coal mining

    Energy Technology Data Exchange (ETDEWEB)

    Kulish, S A; Ponikarov, V D

    1977-01-01

    An analysis is made of the system of supplying coal mining production associations with timber materials. The potential for greater efficiency in the use and processing of timber is indicated. The possibility of using methods of mathematical modelling and forecasting to improve the efficiency of supplying timber to coal associations is demonstrated. 1 table.

  20. California’s forest products industry and timber harvest, 2006

    Science.gov (United States)

    Todd A. Morgan; Jason P. Brandt; Kathleen E. Songster; Charles E. Keegan; Glenn A. Christensen

    2012-01-01

    This report traces the flow of California’s 2006 timber harvest through the primary wood products industry (i.e., firms that process timber into manufactured products such as lumber, as well as facilities such as pulp mills and particleboard plants, which use the wood fiber or mill residue directly from timber processors) and provides a description of the structure,...

  1. Enviromentally Sound Timber Extracting Techniques for Small Tree Harvesting

    Science.gov (United States)

    Lihai Wang

    1999-01-01

    Due to large area disturbed and great deal of energy cost during-its operations, introducing or applying the appropriate timber extracting techniques could significantly reduce the impact of timber extraction operations to forest environment while pursuing the reasonable operation costs. Four environmentally sound timber extraction techniques for small tree harvesting...

  2. Aggregate Timber Supply: From the Forest to the Market

    Science.gov (United States)

    David N. Wear; Subhrendu K. Pattanayak

    2003-01-01

    Timber supply modeling is a means of formalizing the production behavior of heterogeneous landowners managing a wide variety of forest types and vintages within a region. The critical challenge of timber supply modeling is constructing theoretically valid and empirically practical aggregate descriptions of harvest behavior. Understanding timber supply is essential for...

  3. Intelligent tires for identifying coefficient of friction of tire/road contact surfaces using three-axis accelerometer

    International Nuclear Information System (INIS)

    Matsuzaki, Ryosuke; Kamai, Kazuto; Seki, Ryosuke

    2015-01-01

    Intelligent tires equipped with sensors as well as the monitoring of the tire/road contact conditions are in demand for improving vehicle control and safety. With the aim of identifying the coefficient of friction of tire/road contact surfaces during driving, including during cornering, we develop an identification scheme for the coefficient of friction that involves estimation of the slip angle and applied force by using a single lightweight three-axis accelerometer attached on the inner surface of the tire. To validate the developed scheme, we conduct tire-rolling tests using an accelerometer-equipped tire with various slip angles on various types of road surfaces, including dry and wet surfaces. The results of these tests confirm that the estimated slip angle and applied force are reasonable. Furthermore, the identified coefficient of friction by the developed scheme agreed with that measured by standardized tests. (paper)

  4. Robustness Analysis of Timber Truss Structure

    DEFF Research Database (Denmark)

    Rajčić, Vlatka; Čizmar, Dean; Kirkegaard, Poul Henning

    2010-01-01

    The present paper discusses robustness of structures in general and the robustness requirements given in the codes. Robustness of timber structures is also an issues as this is closely related to Working group 3 (Robustness of systems) of the COST E55 project. Finally, an example of a robustness...... evaluation of a widespan timber truss structure is presented. This structure was built few years ago near Zagreb and has a span of 45m. Reliability analysis of the main members and the system is conducted and based on this a robustness analysis is preformed....

  5. Timber Elements: Traditional and Modern Strengthening Techniques

    Directory of Open Access Journals (Sweden)

    Raluca Hohan

    2010-01-01

    Full Text Available The main idea of this paper is to analyse the means for the rehabilitation of our cultural heritage timber structures. Several methods together with their application techniques are described, and also, the reasons for what these strengthening operations become imminent at a point. First of all, the necessity of the timber structural elements strengthening is explained through a short presentation of the factors which are degrading the material. Then, certain precautions and strengthening procedures are presented, all involving the usage of traditional materials like wood, metal, or concrete, and of modern materials like fiber reinforced polymeric composite.

  6. Robustness of Long Span Reciprocal Timber Structures

    DEFF Research Database (Denmark)

    Balfroid, Nathalie; Kirkegaard, Poul Henning

    2011-01-01

    engineer may take necessary steps to design robust structures that are insensitive to accidental circumstances. The present paper makes a discussion of such robustness issues related to the future development of reciprocal timber structures. The paper concludes that these kind of structures can have...... a potential as long span timber structures in real projects if they are carefully designed with respect to the overall robustness strategies.......Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. The interest has also been facilitated due to recently severe structural failures...

  7. Statistical Analysis of Data for Timber Strengths

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard

    2003-01-01

    Statistical analyses are performed for material strength parameters from a large number of specimens of structural timber. Non-parametric statistical analysis and fits have been investigated for the following distribution types: Normal, Lognormal, 2 parameter Weibull and 3-parameter Weibull...... fits to the data available, especially if tail fits are used whereas the Log Normal distribution generally gives a poor fit and larger coefficients of variation, especially if tail fits are used. The implications on the reliability level of typical structural elements and on partial safety factors...... for timber are investigated....

  8. Velocity and uniformity of air circulation in conventional kilns for sawn timber

    Directory of Open Access Journals (Sweden)

    Kolin Branko

    2012-01-01

    Full Text Available This paper presents the results of a research of velocity of air circulation in the conventional kiln drying of sawn timber and its influence on the uniformity of final moisture content. The data showed that the air velocity (between 0.8 - 1.2 m•s -1 is significantly lower than the one that is optimal for timber drying of coniferous species (3 - 4 m•s-1. This results in a reduction in the capacity of installations for drying, increased energy (thermal and electrical consumption and thereby increase in the cost of drying. The correlation between the speed of air circulation and the final MC of timber due to prolonged drying was not established. Recommendations that should eliminate the identified deficiencies are also given.

  9. Identifying the Active Surfaces of Electrochemically Tuned LiCoO2 for Oxygen Evolution Reaction

    International Nuclear Information System (INIS)

    Lu, Zhiyi; Chen, Guangxu; Li, Yanbin; Wang, Haotian; Xie, Jin

    2017-01-01

    Identification of active sites for catalytic processes has both fundamental and technological implications for rational design of future catalysts. Herein, we study the active surfaces of layered lithium cobalt oxide (LCO) for the oxygen evolution reaction (OER) using the enhancement effect of electrochemical delithiation (De-LCO). Our theoretical results indicate that the most stable (0001) surface has a very large overpotential for OER independent of lithium content. In contrast, edge sites such as the nonpolar (1120) and polar (0112) surfaces are predicted to be highly active and dependent on (de)lithiation. The effect of lithium extraction from LCO on the surfaces and their OER activities can be understood by the increase of Co 4+ sites relative to Co 3+ and by the shift of active oxygen 2p states. Experimentally, it is demonstrated that LCO nanosheets, which dominantly expose the (0001) surface show negligible OER enhancement upon delithiation. However, a noticeable increase in OER activity (~0.1 V in overpotential shift at 10 mA cm –2 ) is observed for the LCO nanoparticles, where the basal plane is greatly diminished to expose the edge sites, consistent with the theoretical simulations. In addition, we find that the OER activity of De-LCO nanosheets can be improved if we adopt an acid etching method on LCO to create more active edge sites, which in turn provides a strong evidence for the theoretical indication.

  10. Using lagged dependence to identify (de)coupled surface and subsurface soil moisture values

    Science.gov (United States)

    Carranza, Coleen D. U.; van der Ploeg, Martine J.; Torfs, Paul J. J. F.

    2018-04-01

    Recent advances in radar remote sensing popularized the mapping of surface soil moisture at different spatial scales. Surface soil moisture measurements are used in combination with hydrological models to determine subsurface soil moisture values. However, variability of soil moisture across the soil column is important for estimating depth-integrated values, as decoupling between surface and subsurface can occur. In this study, we employ new methods to investigate the occurrence of (de)coupling between surface and subsurface soil moisture. Using time series datasets, lagged dependence was incorporated in assessing (de)coupling with the idea that surface soil moisture conditions will be reflected at the subsurface after a certain delay. The main approach involves the application of a distributed-lag nonlinear model (DLNM) to simultaneously represent both the functional relation and the lag structure in the time series. The results of an exploratory analysis using residuals from a fitted loess function serve as a posteriori information to determine (de)coupled values. Both methods allow for a range of (de)coupled soil moisture values to be quantified. Results provide new insights into the decoupled range as its occurrence among the sites investigated is not limited to dry conditions.

  11. Continuous agglomerate model for identifying the solute- indifferent part of colloid nanoparticle's surface charge

    International Nuclear Information System (INIS)

    Alfimov, A V; Aryslanova, E M; Chivilikhin, S A

    2016-01-01

    This work proposes an explicit analytical model for the surface potential of a colloidal nano-agglomerate. The model predicts that when an agglomerate reaches a certain critical size, its surface potential becomes independent of the agglomerate radius. The model also provides a method for identifying and quantifying the solute-indifferent charge in nanocolloids, that allows to assess the stability of toxicologically significant parameters of the system. (paper)

  12. Projected US timber and primary forest product market impacts of climate change mitigation through timber set-asides

    Science.gov (United States)

    Prakash Nepal; Peter J. Ince; Kenneth E. Skog; Sun J. Chang

    2013-01-01

    Whereas climate change mitigation involving payments to forest landowners for accumulating carbon on their land may increase carbon stored in forests, it will also affect timber supply and prices. This study estimated the effect on US timber and primary forest product markets of hypothetical timber set-aside scenarios where US forest landowners would be paid to forego...

  13. IDENTIFYING RECENT SURFACE MINING ACTIVITIES USING A NORMALIZED DIFFERENCE VEGETATION INDEX (NDVI) CHANGE DETECTION METHOD

    Science.gov (United States)

    Coal mining is a major resource extraction activity on the Appalachian Mountains. The increased size and frequency of a specific type of surface mining, known as mountain top removal-valley fill, has in recent years raised various environmental concerns. During mountainto...

  14. Identifying apple surface defects using principal components analysis and artifical neural networks

    Science.gov (United States)

    Artificial neural networks and principal components were used to detect surface defects on apples in near-infrared images. Neural networks were trained and tested on sets of principal components derived from columns of pixels from images of apples acquired at two wavelengths (740 nm and 950 nm). I...

  15. Biodiversity: role of non-timber forest products in food security ...

    African Journals Online (AJOL)

    Non-timber forest products (NTFPS) are biological materials from the ecosystem which range from plants, parts of plants, fungi, animals and animal products that are consumed either as food, condiments, spices or medicine. NTFPS have been identified to play an important role in providing primary health and nutritional ...

  16. On the question of the necessity of implementation of automatic control systems in timber industry

    Science.gov (United States)

    Khasanov, E. R.; Zelenkov, P. V.; Petrosyan, M. O.; Murygin, A. V.; Laptenor, V. D.

    2016-04-01

    The paper considers the necessity of implementation of automatic control systems on the level of forest farms management and timber industry. Main areas of activity, which currently subjected to automation, are revealed. Objectives, which solved by implementation of APCS, are identified.

  17. Rent-seeking and timber rights allocation in Ghana

    DEFF Research Database (Denmark)

    Carlsen, Kirsten; Hansen, Christian Pilegaard

    2014-01-01

    This paper describes types, processes and importance of rent-seeking in the allocation of timber rights in Ghana. It is based on an analysis of 30 interviews with large-, medium- and small-scale timber firms, as well as government officials and timber industry organizations in Ghana. The paper...... documents that timber rights allocation is associated with both bureaucratic and political corruption. The latter comes in two forms. First, the findings suggest that well-established relationships exist between politicians and senior bureaucrats on the one side and large-scale timber firms on the other...

  18. Space-time modeling of timber prices

    Science.gov (United States)

    Mo Zhou; Joseph Buongriorno

    2006-01-01

    A space-time econometric model was developed for pine sawtimber timber prices of 21 geographically contiguous regions in the southern United States. The correlations between prices in neighboring regions helped predict future prices. The impulse response analysis showed that although southern pine sawtimber markets were not globally integrated, local supply and demand...

  19. Standard plans for timber bridge superstructures

    Science.gov (United States)

    James P. Wacker; Matthew S. Smith

    2001-01-01

    These standardized bridge plans are for superstructures consisting of treated timber. Seven superstructure types are includes: five longitudinal and two transverse deck systems. Both HS520 and HS25 loadings are included, along with L/360 and L/500 deflection criteria.

  20. Timber resource of Minnesota's Prairie unit, 1977.

    Science.gov (United States)

    Jerold T. Hahn; W. Brad Smith

    1980-01-01

    The fourth inventory of Minnesota's Prairie Unit shows that although commercial forest area decreased 31.7% between 1962 and 1977, growing-stock volume increased 22%. This report gives statistical highlights and contains detailed tables of forest area as well as timber volume, growth, mortality, ownership, and use.

  1. Projecting Timber Inventory at the Product Level

    Science.gov (United States)

    Lawrence Teeter; Xiaoping Zhou

    1999-01-01

    Current timber inventory projections generally lack information on inventory by product classes. Most models available for inventory projection and linked to supply analyses are limited to projecting aggregate softwood and hardwood. The research presented describes a methodology for distributing the volume on each FIA (USDA Forest Service Forest Inventory and Analysis...

  2. Residual load carrying capacity of timber joints

    NARCIS (Netherlands)

    Kuilen, J.W.G. van de

    1999-01-01

    Timber joints that have been preloaded for 2 to 8 years have been short term tested in accordance with EN 26891. The applied load levels varied between 30% and 50% of the average short term strength. The study comprised nailed, toothed-plate and split-ring joints. All joints were made of spruce and

  3. Commercial lumber, round timbers, and ties

    Science.gov (United States)

    David E. Kretschmann

    2010-01-01

    When sawn, a log yields round timber, ties, or lumber of varying quality. This chapter presents a general discussion of grading, standards, and specifications for these commercial products. In a broad sense, commercial lumber is any lumber that is bought or sold in the normal channels of commerce. Commercial lumber may be found in a variety of forms, species, and types...

  4. Grading timber and glued structural members

    Science.gov (United States)

    David E. Kretschmann; Roland Hernandez

    2006-01-01

    Because of its biological nature, which is influenced by many factors as discussed in Chapter 6, the quality of timber is enormously variable. Therefore, some sort of arrangement or classification must be undertaken prior to its use, in order to get the most out of this valuable resource. It is obvious that not all lumber can be used for the same purposes because not...

  5. Pocket Checklists of Indonesian timber trees

    NARCIS (Netherlands)

    Prawira, Soewanda A.; Tantra, I.G.M.; Whitmore, T.C.

    1984-01-01

    Indonesia as yet does not have a comprehensive account of the forest trees which reach timber size (35 cm dbh = 14 inch or 105 cm gbh = 42 inch). A project has been started in August 1983 by the Botany Section of the Forest Research Institute in Bogor, Indonesia, to prepare pocket checklists of the

  6. Non-timber forest products in Hawaii

    Science.gov (United States)

    Katie Kamelamela; James B. Friday; Tamara Ticktin; Ashley. Lehman

    2015-01-01

    Hawaiian forests provide a wide array of non-timber forest products for both traditional and modern uses. Flowers, vines, and ferns are collected for creating garlands or lei for hula dances and parades. Lei made from materials gathered in the forest are made for personal use and sold, especially during graduation times. Bamboo is harvested for structures and for...

  7. IMPACTS OF TIMBER LEGALITY VERIFICATION SYSTEM IMPLEMENTATION ON THE SUSTAINABILITY OF TIMBER INDUSTRY AND PRIVATE FOREST

    Directory of Open Access Journals (Sweden)

    Elvida Yosefi Suryandari

    2017-04-01

    Full Text Available International market requires producers to proof the legality of their wood products to address the issues of illegal logging and illegal trade. Timber Legality Verification System (TLVS has been prepared by the Government of Indonesia that covering the upstream and downstream wood industries. This paper aims to evaluate gaps in the implementation of TLVS policy and its impact on the sustainability of timber industry. This study was using gap, descriptive and costs-structure analyzes. The study was conducted in three provinces, namely: DKI Jakarta, West Java and D.I. Yogyakarta. Research found that the effectiveness of the TLVS implementation was low due to relatively rapid policy changes. This situation became disincetive for investments in timber business. Private sector perceived that TLVS policy should be applied in the upstream of timber business. Hence, the industry and market in the downstream have not been fully support to this system. Furthermore, TLVS policy implementation was considered ineffective by timber industry as well as private forest managers, especially by micro industry and smallholder private forests. This situation threatened the sustainability of timber industry and private forests. Therefore, Institutions should be strengthened in order to improve the quality of human resources and the competitiveness of products.

  8. A Complete Analytical Screening Identifies the Real Pesticide Contamination of Surface Waters

    Science.gov (United States)

    Moschet, Christoph; Wittmer, Irene; Simovic, Jelena; Junghans, Marion; Singer, Heinz; Stamm, Christian; Leu, Christian; Hollender, Juliane

    2014-05-01

    A comprehensive assessment of pesticides in surface waters is challenging due to the large number of potential contaminants. In Switzerland for example, roughly 500 active ingredients are registered as either plant protection agent (PPA) or as biocide. In addition, an unlimited number of transformations products (TPs) can enter or be formed in surfaced waters. Most scientific publications or regulatory monitoring authorities have implemented 15-40 pesticides in their analytics. Only a few TPs are normally included. Interpretations of the surface water quality based on these subsets remains error prone. In the presented study, we carried out a nearly complete analytical screening covering 86% of all polar organic pesticides (from agricultural and urban sources) in Switzerland (300 substances) and 134 TPs with limits of quantification in the low ng/L range. The comprehensive pesticide screening was conducted by liquid-chromatography coupled to high-resolution tandem mass spectrometry. Five medium-sized rivers (Strahler stream order 3-4, catchment size 35-105 km2), containing high percentiles of diverse crops, orchards and urban settlements in their catchments, were sampled from March till July 2012. Nine subsequent time-proportional bi-weekly composite samples were taken in order to quantify average concentrations. In total, 104 different active ingredients could be detected in at least one of the five rivers. Thereby, 82 substances were only registered as PPA, 20 were registered as PPA and as biocide and 2 were only registered as biocide. Within the PPAs, herbicides had the most frequent detections and the highest concentrations, followed by fungicides and insecticides. Most concentrations were found between 1 and 50 ng/L; however 31 substances (mainly herbicides) had concentrations above 100 ng/L and 3 herbicides above 1000 ng/L. It has to be noted that the measured concentrations are average concentrations over two weeks in medium sized streams and that maximum

  9. Identifying Key Issues and Potential Solutions for Integrated Arrival, Departure, Surface Operations by Surveying Stakeholder Preferences

    Science.gov (United States)

    Aponso, Bimal; Coppenbarger, Richard A.; Jung, Yoon; Quon, Leighton; Lohr, Gary; O’Connor, Neil; Engelland, Shawn

    2015-01-01

    NASA's Aeronautics Research Mission Directorate (ARMD) collaborates with the FAA and industry to provide concepts and technologies that enhance the transition to the next-generation air-traffic management system (NextGen). To facilitate this collaboration, ARMD has a series of Airspace Technology Demonstration (ATD) sub-projects that develop, demonstrate, and transitions NASA technologies and concepts for implementation in the National Airspace System (NAS). The second of these sub-projects, ATD-2, is focused on the potential benefits to NAS stakeholders of integrated arrival, departure, surface (IADS) operations. To determine the project objectives and assess the benefits of a potential solution, NASA surveyed NAS stakeholders to understand the existing issues in arrival, departure, and surface operations, and the perceived benefits of better integrating these operations. NASA surveyed a broad cross-section of stakeholders representing the airlines, airports, air-navigation service providers, and industry providers of NAS tools. The survey indicated that improving the predictability of flight times (schedules) could improve efficiency in arrival, departure, and surface operations. Stakeholders also mentioned the need for better strategic and tactical information on traffic constraints as well as better information sharing and a coupled collaborative planning process that allows stakeholders to coordinate IADS operations. To assess the impact of a potential solution, NASA sketched an initial departure scheduling concept and assessed its viability by surveying a select group of stakeholders for a second time. The objective of the departure scheduler was to enable flights to move continuously from gate to cruise with minimal interruption in a busy metroplex airspace environment using strategic and tactical scheduling enhanced by collaborative planning between airlines and service providers. The stakeholders agreed that this departure concept could improve schedule

  10. Surface electromyographic amplitude does not identify differences in neural drive to synergistic muscles.

    Science.gov (United States)

    Martinez-Valdes, Eduardo; Negro, Francesco; Falla, Deborah; De Nunzio, Alessandro Marco; Farina, Dario

    2018-04-01

    Surface electromyographic (EMG) signal amplitude is typically used to compare the neural drive to muscles. We experimentally investigated this association by studying the motor unit (MU) behavior and action potentials in the vastus medialis (VM) and vastus lateralis (VL) muscles. Eighteen participants performed isometric knee extensions at four target torques [10, 30, 50, and 70% of the maximum torque (MVC)] while high-density EMG signals were recorded from the VM and VL. The absolute EMG amplitude was greater for VM than VL ( P differences in EMG amplitude can be due to both differences in the neural drive and in the size of the MU action potentials, we indirectly inferred the neural drives received by the two muscles by estimating the synaptic inputs received by the corresponding motor neuron pools. For this purpose, we analyzed the increase in discharge rate from recruitment to target torque for motor units matched by recruitment threshold in the two muscles. This analysis indicated that the two muscles received similar levels of neural drive. Nonetheless, the size of the MU action potentials was greater for VM than VL ( P difference explained most of the differences in EMG amplitude between the two muscles (~63% of explained variance). These results indicate that EMG amplitude, even following normalization, does not reflect the neural drive to synergistic muscles. Moreover, absolute EMG amplitude is mainly explained by the size of MU action potentials. NEW & NOTEWORTHY Electromyographic (EMG) amplitude is widely used to compare indirectly the strength of neural drive received by synergistic muscles. However, there are no studies validating this approach with motor unit data. Here, we compared between-muscles differences in surface EMG amplitude and motor unit behavior. The results clarify the limitations of surface EMG to interpret differences in neural drive between muscles.

  11. Two-dimensional heat flow analysis applied to heat sterilization of ponderosa pine and Douglas-fir square timbers

    Science.gov (United States)

    William T. Simpson

    2004-01-01

    Equations for a two-dimensional finite difference heat flow analysis were developed and applied to ponderosa pine and Douglas-fir square timbers to calculate the time required to heat the center of the squares to target temperature. The squares were solid piled, which made their surfaces inaccessible to the heating air, and thus surface temperatures failed to attain...

  12. Identifying drought response of semi-arid aeolian systems using near-surface luminescence profiles and changepoint analysis, Nebraska Sandhills.

    Science.gov (United States)

    Buckland, Catherine; Bailey, Richard; Thomas, David

    2017-04-01

    Two billion people living in drylands are affected by land degradation. Sediment erosion by wind and water removes fertile soil and destabilises landscapes. Vegetation disturbance is a key driver of dryland erosion caused by both natural and human forcings: drought, fire, land use, grazing pressure. A quantified understanding of vegetation cover sensitivities and resultant surface change to forcing factors is needed if the vegetation and landscape response to future climate change and human pressure are to be better predicted. Using quartz luminescence dating and statistical changepoint analysis (Killick & Eckley, 2014) this study demonstrates the ability to identify step-changes in depositional age of near-surface sediments. Lx/Tx luminescence profiles coupled with statistical analysis show the use of near-surface sediments in providing a high-resolution record of recent system response and aeolian system thresholds. This research determines how the environment has recorded and retained sedimentary evidence of drought response and land use disturbances over the last two hundred years across both individual landforms and the wider Nebraska Sandhills. Identifying surface deposition and comparing with records of climate, fire and land use changes allows us to assess the sensitivity and stability of the surface sediment to a range of forcing factors. Killick, R and Eckley, IA. (2014) "changepoint: An R Package for Changepoint Analysis." Journal of Statistical Software, (58) 1-19.

  13. Identifying and Evaluating the Relationships that Control a Land Surface Model's Hydrological Behavior

    Science.gov (United States)

    Koster, Randal D.; Mahanama, Sarith P.

    2012-01-01

    The inherent soil moisture-evaporation relationships used in today 's land surface models (LSMs) arguably reflect a lot of guesswork given the lack of contemporaneous evaporation and soil moisture observations at the spatial scales represented by regional and global models. The inherent soil moisture-runoff relationships used in the LSMs are also of uncertain accuracy. Evaluating these relationships is difficult but crucial given that they have a major impact on how the land component contributes to hydrological and meteorological variability within the climate system. The relationships, it turns out, can be examined efficiently and effectively with a simple water balance model framework. The simple water balance model, driven with multi-decadal observations covering the conterminous United States, shows how different prescribed relationships lead to different manifestations of hydrological variability, some of which can be compared directly to observations. Through the testing of a wide suite of relationships, the simple model provides estimates for the underlying relationships that operate in nature and that should be operating in LSMs. We examine the relationships currently used in a number of different LSMs in the context of the simple water balance model results and make recommendations for potential first-order improvements to these LSMs.

  14. The Load-Bearing Capacity of Timber-Glass Composite I-Beams Made with Polyurethane Adhesives

    Science.gov (United States)

    Rodacki, Konrad

    2017-12-01

    This article discusses the issue of composite timber-glass I-beams, which are an interesting alternative for load-bearing beams of ceilings and roofs. The reasoning behind the use of timber-glass I-beams is the combination of the best features of both materials - this enables the creation of particularly safe beams with regard to structural stability and post-breakage load capacity. Due to the significant differences between the bonding surfaces of timber and glass, a study on the adhesion of various adhesives to both surfaces is presented at the beginning of the paper. After examination, two adhesives were selected for offering the best performance when used with composite beams. The beams were investigated using a four-point bending test under quasi-static loading.

  15. Timber Chips as the Insulation Material for Energy Saving in Prefabricated Offices

    Directory of Open Access Journals (Sweden)

    Yupeng Wang

    2016-06-01

    Full Text Available This research demonstrates the feasibility of a roof insulation method for prefabricated offices that uses vinyl packed timber chips to reduce air conditioning loads (hereinafter referred to as AC loads and which also improves indoor thermal comfort. The advantages of the new roof insulation method were revealed through comparing the impacts of four roof types on prefabricated offices. The AC load and indoor thermal comfort (surface temperature and air temperature were evaluated. The disposal of scrap timber discarded from building construction projects is costing money, and is also a waste of natural resources. The assessment of a new roof insulation method with timber chips demonstrates the advanced usage of timber chips, reducing the environmental load in the building construction process. On the other hand, since prefabricated offices have lower thermal storage capacities and are less airtight than RC (reinforced concrete or S (steel structured buildings, the AC load consumption and indoor thermal comfort exacerbation in prefabricated offices is more serious. Especially in summer, a large amount of solar energy absorption from the roof raises the indoor air temperature and significantly increases the cooling load. This research contributes to the environmental design for prefabricated offices, and develops a method for the reuse of wood chips.

  16. Framework for Robustness Assessment of Timber Structures

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard

    2011-01-01

    This paper presents a theoretical framework for the design and analysis of robustness of timber structures. This is actualized by a more4 frequent use of advanced types of timber structures with limited redundancy and serious consequences in the case of failure. Combined with increased requirements...... to efficiency in design and execution followed by increased risk of human errors has made the need of requirements to robustness of new structures essential. Further, the collapse of the Ballerup Super Arena, the bad Reichenhall Ice-Arena and a number of other structural systems during the last 10 years has...... increased the interest in robustness. Typically, modern structural design codes require that ‘the consequence of damages to structures should not be disproportional to the causes of the damages’. However, although the importance of robustness for structural design is widely recognized, the code requirements...

  17. Timber Curtain: Designing with material capabilities

    DEFF Research Database (Denmark)

    Lahmy, Maya; Larsen, Niels Martin

    2015-01-01

    of the generative phase to fabrication of the artefact. Brought together by various conceptual and structural elements the Timber Curtain forms a 4.5 x 2.5 x 0.5 m construct of assembled wood components, digitally crafted through advanced production techniques. Concerned with materiality and processing of the wood......Timber Curtain explores relations between digital precision and material indeterminacy. It is an installation engaging spatially through its presence as a 1:1 architectural component as well as it is exploring novel technologies in the architectural design process from the very beginning...... an associative digital model that could gather and compute in put from material behaviour and out put manufacturing data was scripted. This method enables material capacity to be pushed to the limit of its performance allowing novel sensuous and structural qualities to emerge. The method is developed with use...

  18. Robustness Assessment of Spatial Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning

    2012-01-01

    Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. In order to minimise the likelihood of such disproportionate structural failures many modern buildi...... to robustness of spatial timber structures and will discuss the consequences of such robustness issues related to the future development of timber structures.......Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. In order to minimise the likelihood of such disproportionate structural failures many modern building...... codes consider the need for robustness of structures and provide strategies and methods to obtain robustness. Therefore a structural engineer may take necessary steps to design robust structures that are insensitive to accidental circumstances. The present paper summaries issues with respect...

  19. Probabilistic Modeling of Graded Timber Material Properties

    DEFF Research Database (Denmark)

    Faber, M. H.; Köhler, J.; Sørensen, John Dalsgaard

    2004-01-01

    The probabilistic modeling of timber material characteristics is considered with special emphasis to the modeling of the effect of different quality control and selection procedures used as means for quality grading in the production line. It is shown how statistical models may be established...... on the basis of the same type of information which is normally collected as a part of the quality control procedures and furthermore, how the efficiency of different control procedures may be quantified and compared. The tail behavior of the probability distributions of timber material characteristics plays...... such that they may readily be applied in structural reliability analysis and their format appears to be appropriate for codification purposes of quality control and selection for grading procedures....

  20. Timber drying kilns using solar energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-15

    The objective of this project was to research the potential for solar kilns for drying timber in tropical countries (Guyana, Honduras and Belize) and produce a manual which will provide the knowledge necessary to build and operate a solar kiln. The main output of the project is the manual Solar Heated Timber Drying Kilns - a Manual on their Design and Operation. The manual covers:- background information; selection of construction materials; methods of kiln construction; kiln operation and maintenance procedure. The manual has been designed to provide the necessary knowledge and confidence to build and operate a solar kiln, and ultimately benefit from an improved product. Specifically, the manual will benefit small building construction units, furniture and joinery manufacturers and sawmill operators in developing and developed countries worldwide. (author)

  1. Timbered masonry for earthquake resistance in Europe

    OpenAIRE

    Dutu, A.; Gomes Ferreira, J.; Guerreiro, L.; Branco, F.; Gonçalves, A. M.

    2012-01-01

    Europe is a continent that is subject to significant seismic activity. Thus, the buildings’ seismic behaviour must be analysed, including not only the new structures, designed under more rigorous codes, but also older ones. This article examines a traditional type of building that uses timber frame/masonry, which is found in Portugal, Turkey, France, England, Greece, Romania, Italy, Spain, Germany and Scandinavia. Although the structures differ in terms of construction details, their struc...

  2. Timbered masonry for earthquake resistance in Europe

    OpenAIRE

    Dutu, A.; Gomes Ferreira, J.; Guerreiro, L.; Branco, F.; Gonçalves, A. M.

    2012-01-01

    Europe is a continent that is subject to significant seismic activity. Thus, the buildings’ seismic behaviour must be analysed, including not only the new structures, designed under more rigorous codes, but also older ones. This article examines a traditional type of building that uses timber frame/masonry, which is found in Portugal, Turkey, France, England, Greece, Romania, Italy, Spain, Germany and Scandinavia. Although the structures differ in terms of construction details, their str...

  3. Roof timber for fortifying mining works

    Energy Technology Data Exchange (ETDEWEB)

    Shirokov, A P; Kuntsevich, V IK; Pishchulin, V V; Seryi, A M; Volkov, P A

    1981-05-15

    The roof timber for fortifying mining works includes spring-mounted hinged elements made from a special rolled metal. In order to increase the carrying capacity of the support by increasing the deformation threshold, the springs are mounted by their expanded section to the lower side of the hinge; their ends are connected in turn to the elements made from the special rolled metal on both sides of the hinge.

  4. Timber joints under long-term loading

    DEFF Research Database (Denmark)

    Feldborg, T.; Johansen, M.

    This report describes tests and results from stiffness and strength testing of splice joints under long-term loading. During two years of loading the spicimens were exposed to cyclically changing relative humidity. After the loading period the specimens were short-term tested. The connectors were...... integral nail-plates and nailed steel and plywood gussets. The report is intended for designers and researchers in timber engineering....

  5. State forest timber sales in 2006

    International Nuclear Information System (INIS)

    Office National des Forets

    2007-01-01

    For the first time since the 1999 storms, forest owners have experienced a favourable market. The combination of buoyant demand for both industrial round-wood and timber and consolidation of supply led to a significant increase in prices. With a logging volume of 15 million m 3 (standing timber equivalent), state forest timber supply has remained at a high level, slightly above that of 1999. The improved business cycle situation has pushed prices up, including for beech for which rates had stagnated for some time. However, in spite of the 15% rise compared to 2005, the average per cubic metre price sold by the ONF (31.20 euros), all categories of timber and all state forests taken together, remains well below the average for the 1996-1999 period (37.80 euros). While unsold stocks have fallen considerably, the ONF has sought to facilitate access to products by industry by modernising its sales methods in line with the new 2005 legislative and regulatory provisions. Greater flexibility in the rules applicable to privately negotiated spot sales and supply contracts should over time contribute to stabilizing and reducing the accessory costs of supply. The changes implemented over the last decade in favour of private sales, which now account for nearly 40% of volumes sold, should continue in the future. Of those volumes, 20% were sold under supply contracts, a proportion that is rising sharply. These contracts covered more than one million m 3 in 2006, encouraging the ONF to adopt a new sales scheme and establish structures for consultations with both forest municipalities and the downstream component of the industry. (authors)

  6. Markets, Government Policy, and China’s Timber Supply

    Science.gov (United States)

    Han Zhang; Joseph Buongiorno

    2012-01-01

    China’s domestic demand and exports of wood products are rising rapidly compared to domestic supply. The determinants of timber supply in China were investigated with panel data from 25 provinces from 1999 to 2009. The results indicated that China’s timber supply had responded to both market forces, reflected by timber prices largely determined by world demand and...

  7. Ranking independent timber investments by alternative investment criteria

    Science.gov (United States)

    Thomas J. Mills; Gary E. Dixon

    1982-01-01

    A sample of 231 independent timber investments were ranked by internal rate of return, present net worth per acre and the benefit cost ratio—the last two discounted by 3, 6.4. 7.5. and 10 percent—to determine if the different criteria had a practical influence on timber investment ranking. The samples in this study were drawn from a group of timber investments...

  8. Study on the ventilation resistance of timbered airways (II)

    Energy Technology Data Exchange (ETDEWEB)

    Oba, S; Takiguchi, I

    1977-01-01

    From the results of a model study described in a previous paper (I), (Vol.23, No.4), a timber factor Kr is determined as a specific parameter for type of timber and as a function of spacing ratio d/e where d and e are the spacing and the height of sets respectively. A general formula for the determination of the friction coefficient of timbered airways is also proposed.

  9. XAS studies of the effectiveness of iron chelating treatments of Mary Rose timbers

    International Nuclear Information System (INIS)

    Berko, A; Schofield, E J; Chadwick, A V; Smith, A D; Jones, A M; Mosselmans, J F W

    2009-01-01

    The oxidation of sulfur in marine archaeological timbers under museum storage conditions is a recently identified problem, particularly for major artefacts such as historic ships excavated from the seabed. Recent work on the Vasa has stressed the role of iron in catalysing the oxidative degradation of the wood cellulose and the polyethylene glycols used to restore mechanical integrity to the timbers. In developing new treatment protocols for the long term preservation of Henry VIII of England's flagship, the Mary Rose, we are investigating the potential of chelating agents to neutralise and remove the iron products from the ships timbers. We have explored the use of aqueous solutions of chelating agents of calcium phytate, ethylenediaminetetraacetic acid (EDTA), diethylenetriaminepentaacetic acid (DTPA) and ammonium citrate to extract the iron compounds. All of these solutions exhibit some level of iron removal; however the key is to find the most effective concentration at pH of around 7 of the reagent solution, to minimise the treatment time and find the most cost-effective treatment for the whole of the Mary Rose hull. Fe K-edge XAFS data from samples of Mary Rose timbers, before and after treatment by the chelating agents mentioned has been collected. The data collected provide valuable insights into the effectiveness of the treatment solutions.

  10. Long term contracts signed in Slovak timber business

    International Nuclear Information System (INIS)

    Haluza, I.

    2005-01-01

    The Slovak timber business is changing. The state-owned company, SR Forests, which cuts more then 50% of Slovak timber has signed long term agreements with major domestic timber processing companies - Smrecina, the Rettenmeier Tatra Timber saw mill in Liptovsky Mikulas and two paper mills - Mondi SCP Ruzomberok and Kappa Sturovo. In the past, only quarterly contracts were signed. Now, for the first time, two-year contracts have been signed that should help the timber processing industry and the forestry sector. The General Director of Lesy SR (SR Forests), Karol Vins, hopes for better sale prices. Company headquarters wants to maintain better control of prices than under the old system of timber sales by its branches. In the opinion of the General Director of the Forestry Section at the Ministry of Agriculture, long term contracts will guarantee a stable delivery of timber to processing companies, giving investors in new production capacity a better position in negotiations with banks regarding financing. According to K. Vins, long term contracts have so far only been negotiated with major timber processing companies which are mostly controlled by foreign capital and therefore have good payment discipline. The Association of the Timber Processing Industry is unhappy regarding developments and Lesy SR has not invited domestic companies to these negotiations

  11. Seismic retrofitting of timber framed walls

    Directory of Open Access Journals (Sweden)

    Gonçalves, A. M.

    2014-12-01

    Full Text Available After the 1755 earthquake that destroyed Lisbon, an innovative anti-seismic structural system was developed consisting of a timber skeleton, that included timber framed masonry walls. After more than 250 years these structures need rehabilitation to face the present demands. The research presented in this paper aimed at experimentally characterizing the cyclic behaviour of timber framed walls reinforced with three different methods, namely: (i elastic-plastic dampers on diagonal braces, (ii reinforcement of timber connections with steel plates, (iii application of a reinforced rendering. The elastic-plastic damper showed an unsymmetrical behaviour and some difficulties to implement in practice. The strengthening with reinforced render led to an initial stiffness increase but showed a limited deformation capacity. The walls with reinforcing steel plates at the timber connections showed the best behaviour in terms of strength, stiffness and energy dissipation.Después del terremoto de 1755 que destruyó Lisboa, un sistema estructural antisísmico muy innovador fue desarrollado. El sistema consistió en un esqueleto de madera, que incluyó la construcción de muros de mampostería con un entramado de madera. Transcurridos más de 250 años, estas estructuras necesitan rehabilitación para poder hacer frente a los requisitos estructurales actuales. La investigación presentada en este trabajo tiene como objetivo caracterizar experimentalmente el comportamiento cíclico de los muros con entramado de madera reforzados con tres métodos diferentes: (i amortiguadores elasto-plásticos, (ii refuerzo de las conexiones de madera con placas de acero, (iii aplicación de un mortero reforzado. El amortiguador elasto-plástico mostró un comportamiento asimétrico y algunas dificultades para aplicarlo en la práctica. El refuerzo con mortero reforzado condujo a un aumento de la rigidez inicial, pero reveló una capacidad de deformación limitada. Los muros con

  12. Combining Phage and Yeast Cell Surface Antibody Display to Identify Novel Cell Type-Selective Internalizing Human Monoclonal Antibodies.

    Science.gov (United States)

    Bidlingmaier, Scott; Su, Yang; Liu, Bin

    2015-01-01

    Using phage antibody display, large libraries can be generated and screened to identify monoclonal antibodies with affinity for target antigens. However, while library size and diversity is an advantage of the phage display method, there is limited ability to quantitatively enrich for specific binding properties such as affinity. One way of overcoming this limitation is to combine the scale of phage display selections with the flexibility and quantitativeness of FACS-based yeast surface display selections. In this chapter we describe protocols for generating yeast surface antibody display libraries using phage antibody display selection outputs as starting material and FACS-based enrichment of target antigen-binding clones from these libraries. These methods should be widely applicable for the identification of monoclonal antibodies with specific binding properties.

  13. Post Mortem Validation of MRI-Identified Veins on the Surface of the Cerebral Cortex as Potential Landmarks for Neurosurgery

    Directory of Open Access Journals (Sweden)

    Günther Grabner

    2017-06-01

    Full Text Available Background and Objective: Image-guided neurosurgery uses information from a wide spectrum of methods to inform the neurosurgeon's judgement about which tissue to resect and which to spare. Imaging data are registered to the patient's skull so that they correspond to the intraoperative macro- and microscopic view. The correspondence between imaging and optical systems breaks down during surgery, however, as a result of cerebro-spinal fluid drain age, tissue resection, and gravity-based brain shift. In this work we investigate whether a map of surface veins, automatically segmented from MRI, could serve as additional reference system.Methods: Gradient-echo based T2*-weighted imaging was performed on two human cadavers heads using a 7 Tesla MRI scanner. Automatic vessel segmentation was performed using the Frangi vesselness filter, and surface renderings of vessels compared with photographs of the surface of the brain following craniotomy.Results: A high level of correspondence was established between vessel maps and the post autopsy photographs. Corresponding veins, including the prominent superior anastomotic veins, could be identified in all brain lobes.Conclusion: Automatic surface vessel segmentation is feasible and the high correspondence to post autopsy photographs indicates that they could be used as an additional reference system for image-guided neurosurgery in order to maintain the correspondence between imaging and optical systems.This has the advantage over a skull-based reference system that veins are clearly visible to the surgeon and move and deform with the underlying tissue, potentially making this surface net of landmarks robust to brain shift.

  14. Appropriateness of Probit-9 in development of quarantine treatments for timber and timber commodities

    Science.gov (United States)

    Marcus Schortemeyer; Ken Thomas; Robert A. Haack; Adnan Uzunovic; Kelli Hoover; Jack A. Simpson; Cheryl A. Grgurinovic

    2011-01-01

    Following the increasing international phasing out of methyl bromide for quarantine purposes, the development of alternative treatments for timber pests becomes imperative. The international accreditation of new quarantine treatments requires verification standards that give confidence in the effectiveness of a treatment. Probit-9 mortality is a standard for treatment...

  15. North Dakota timber industry: an assessment of timber product output and use, 2009

    Science.gov (United States)

    David E. Haugen; Robert A. Harsel

    2013-01-01

    Presents recent North Dakota forest industry trends; production and receipts of industrial roundwood; and production of saw logs and other products in 2009. Logging residue generated from timber harvest operations is reported, as well as wood and bark residue generated at primary wood-using mills and disposition of mill residues.

  16. South Dakota timber industry: an assessment of timber product output and use, 2009

    Science.gov (United States)

    Ronald J. Piva; Gregory J. Josten

    2013-01-01

    Presents recent South Dakota forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, pulpwood, and other products in 2009. Logging residue generated from timber harvest operations is reported, as well as wood and bark residue generated at primary wood-using mills and disposition of mill residues.

  17. Wisconsin timber industry--an assessment of timber product output and use, 1988.

    Science.gov (United States)

    W. Brad Smith; James W. Whipple

    1990-01-01

    Discusses recent Wisconsin forest industry trends; production and receipts of pulpwood, saw logs, and veneer logs; and production of other timber products in 1988. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of this mill residue.

  18. Tensile properties of machine strength graded timber for glued laminated timber

    DEFF Research Database (Denmark)

    Boström, Lars; Hoffmeyer, Preben; Solli, Kjell-Helge

    1999-01-01

    Special setting values based on tensile properties of Norway spruce are established for four different strength grading machines. The machines included are Computermatic, Cook-Bolinder, Ersson and Dynagrade.The study shows that the yield of timber to be used in tension, such as laminations...

  19. Excavating the surface-associated and secretory proteome of Mycobacterium leprae for identifying vaccines and diagnostic markers relevant immunodominant epitopes.

    Science.gov (United States)

    Rana, Aarti; Thakur, Shweta; Bhardwaj, Nupur; Kumar, Devender; Akhter, Yusuf

    2016-12-01

    For centuries, Mycobacterium leprae, etiological agent of leprosy, has been afflicting mankind regardless of extensive use of live-attenuated vaccines and antibiotics. Surface-associated and secretory proteins (SASPs) are attractive targets against bacteria. We have integrated biological knowledge with computational approaches and present a proteome-wide identification of SASPs. We also performed computational assignment of immunodominant epitopes as coordinates of prospective antigenic candidates in most important class of SASPs, the outer membrane proteins (OMPs). Exploiting the known protein sequence and structural characteristics shared by the SASPs from bacteria, 17 lipoproteins, 11 secretory and 19 novel OMPs (including 4 essential proteins) were identified in M. leprae As OMPs represent the most exposed antigens on the cell surface, their immunoinformatics analysis showed that the identified 19 OMPs harbor T-cell MHC class I epitopes and class II epitopes against HLA-DR alleles (54), while 15 OMPs present potential T-cell class II epitopes against HLA-DQ alleles (6) and 7 OMPs possess T-cell class II epitopes against HLA-DP alleles (5) of humans. Additionally, 11 M. leprae OMPs were found to have B-cell epitopes and these may be considered as prime candidates for the development of new immunotherapeutics against M. leprae. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  20. Assessment of demand and supply of timber products in Benue ...

    African Journals Online (AJOL)

    This study examines demand and supply of timber products in Benue State Nigeria with a view to highlighting the responsiveness of forest policy implementation. The scope of the study lies on plantation establishment targets and costs for 1999 to 2003, actual plantation establishment, timber supply and demand from ...

  1. Cattle and elk responses to intensive timber harvest.

    Science.gov (United States)

    Michael J. Wisdom; Bruce K. Johnson; Martin Vavra; Jennifer M. Boyd; Priscilla K. Coe; John G. Kie; Alan A. Ager; Norman J. Cimon

    2004-01-01

    Forested habitats for cattle and elk (Cervus elaphus) in the western United States have changed substantially in response to intensive timber management during the latter half of the 20th century. Consequently, the subject of how elk and other ungulates respond to timber management is a high-profile, long-standing issue that continues to be studied...

  2. Field investigations of historic covered timber bridges in the USA

    Science.gov (United States)

    James Wacker; Travis Hosteng; Brent. Phares

    2012-01-01

    The Federal Highway Administration is sponsoring a comprehensive research program on Historic Covered Timber Bridges in the USA. This national program's main purpose is to develop improved methods to preserve, rehabililate, and restore the timber bridge trusses that were developed during the early 1800s, and in many cases are still in service today. The overall...

  3. Influence Of Density On The Durabilities Of Three Ghanaian Timbers ...

    African Journals Online (AJOL)

    Review of factors influencing wood durability shows although density varies depending on trunk position, its role appears controversial for many timber species. Thus, for the first time, the influence of density on the durability of three Ghanaian timbers (Nauclea diderrichii (de Wild.) Merr., Nesogordonia papaverifera (A. Chev ...

  4. Lateral testing of glued laminated timber tudor arch

    Science.gov (United States)

    Douglas R. Rammer; Philip Line

    2016-01-01

    Glued laminated timber Tudor arches have been in wide use in the United States since the 1930s, but detailed knowledge related to seismic design in modern U.S. building codes is lacking. FEMA P-695 (P-695) is a methodology to determine seismic performance factors for a seismic force resisting system. A limited P-695 study for glued laminated timber arch structures...

  5. Timber Management Opportunities for Nebraska 1983-1992

    Science.gov (United States)

    W. Brad Smith; Tom D. Wardle

    1984-01-01

    Reviews opportunities for treatment of timber stands in Nebraska for the decade 1983 - 1992. Under the assumptions and management guides specified, 52 percent of Nebraska''s commercial forest land would benefit from timber harvest or some other form of treatment during the decade.

  6. Projecting national forest inventories for the 2000 RPA timber assessment.

    Science.gov (United States)

    John R. Mills; Xiaoping. Zhou

    2003-01-01

    National forest inventories were projected in a study that was part of the 2000 USDA Forest Service Resource Planning Act (RPA) timber assessment. This paper includes an overview of the status and structure of timber inventory of the National Forest System and presents 50-year projections under several scenarios. To examine a range of possible outcomes, results are...

  7. Comparative durability of timber bridges in the USA

    Science.gov (United States)

    James P. Wacker; Brian K. Brashaw

    2017-01-01

    As engineers begin to utilize life-cycle-cost design approaches for timber bridges, there is a necessity for more reliable data about their durability and expected service life. This paper summarizes a comprehensive effort to assess the current condition of more than one hundred timber highway bridge superstructures throughout the United States. This national study was...

  8. 125 Timber Dealers' Perception of their Knowledge of the Forest ...

    African Journals Online (AJOL)

    Nekky Umera

    Abstract. This study investigated timber dealers' knowledge of the forest law and regulations in Uyo Senatorial District. Five timber markets were selected through two-stage sampling. Data were collected from 238 traders in the selected markets using structured questionnaires and subjected to descriptive and inferential ...

  9. Whole tree transportation system for timber processing depots

    Science.gov (United States)

    John Lancaster; Tom Gallagher; Tim  McDonald; Dana Mitchell

    2016-01-01

    The growing demand for alternative energy has led those who are interested in producing sustainable energy from renewable timber to devise new concepts to satisfy those demands. The concept of timber processing depots, where whole stem trees will be delivered for future processing into wood products and high quality energy fuel, has led to the re-evaluation of our...

  10. Infill Panels and the tube connection in timber frames

    NARCIS (Netherlands)

    Leijten, A.J.M.; Jorissen, A.J.M.; Hoenderkamp, J.C.D.

    2012-01-01

    In recent years timber infill panels have been proposed for multi-story column-beam frame structures with the aim to substitute the stabilizing function of column-beam moment connections. The preliminary study reported in this paper considers a column-beam timber frame where stability is assured by

  11. Lateral Stiffness of Timber Frames with CLT Infill Panels

    NARCIS (Netherlands)

    Leijten, A.J.M.; Jorissen, A.J.M.; Hoenderkamp, J.C.D.; Haddad, Y.M.

    2011-01-01

    In recent years timber infill panels have been proposed for multi-story column-beam frame structures with the aim to substitute the stabilizing function of column-beam moment connections. The preliminary study reported in this paper considers a column-beam timber frame where stability is assured by

  12. Non-timber forest products and forest stewardship plans

    Science.gov (United States)

    Becky Barlow; Tanner Filyaw; Sarah W. Workman

    2015-01-01

    To many woodland owners “harvesting” typically means the removal of timber from forests. In recent years many landowners have become aware of the role non-timber forest products (NTFPs) can play in supplemental management strategies to produce income while preserving other forest qualities. NTFPs are a diverse group of craft, culinary, and medicinal products that have...

  13. Feasibility Investigation into Strengthening of Timber Bridge Stringers

    Science.gov (United States)

    2007-05-01

    12 Studies on timber members recycled from old timber structures...55 Figure 63. The load cell-hydraulic ram setup with spreader beam.....................................................56 Figure 64. The MTS...actuator and spreader beam................................................................................56 Figure 65. Effectiveness of a repair method

  14. Alaska's timber harvest and forest products industry, 2005

    Science.gov (United States)

    Jeff M. Halbrook; Todd A. Morgan; Jason P. Brandt; Charles E. Keegan; Thale Dillon; Tara M. Barrett

    2009-01-01

    This report traces the flow of timber harvested in Alaska during calendar year 2005, describes the composition and operations of the state's primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as trends in timber harvest, production, and sales of primary wood products....

  15. Alaska’s timber harvest and forest products industry, 2011

    Science.gov (United States)

    Erik C. Berg; Charles B. Gale; Todd A. Morgan; Allen M. Brackley; Charles E. Keegan; Susan J. Alexander; Glenn A. Christensen; Chelsea P. McIver; Micah G. Scudder

    2014-01-01

    This report traces the flow of timber harvested in Alaska during calendar year 2011, describes the composition and operations of the state’s primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as trends in timber harvest, production, export, sales of primary wood products,...

  16. Labeling surface epitopes to identify Cryptosporidium life stages using a scanning electron microscopy-based immunogold approach.

    Science.gov (United States)

    Edwards, Hanna; Thompson, R C Andrew; Koh, Wan H; Clode, Peta L

    2012-02-01

    The Apicomplexan parasite Cryptosporidium parvum is responsible for the widespread disease cryptosporidiosis, in both humans and livestock. The nature of C. parvum infection is far from understood and many questions remain in regard to host-parasite interactions, limiting successful treatment of the disease. To definitively identify a range of C. parvum stages in cell culture and to begin to investigate host cell interactions in some of the lesser known life stages, we have utilized a combined scanning electron microscopy and immunolabeling approach, correlating high resolution microstructural information with definitive immunogold labeling of Cryptosporidium stages. Several life cycle stages, including oocysts, merozoites I, trophozoites, gamonts and microgametocytes, were successfully immunolabeled in an in vitro model system. Developing oocysts were clearly immunolabeled, but this did not persist once excystation had occurred. Immunolabeling visualized on the host cell surface adjacent to invasive merozoites is likely to be indicative of receptor shedding, with merozoites also initiating host responses that manifested as abnormal microvilli on the host cell surface. Small sub-micron stages such as microgametocytes, which were impossible to identify as single entities without immunolabeling, were readily visualized and observed to attach to host cells via novel membranous projections. Epicellular parasites also expressed Cryptosporidium-derived epitopes within their encapsulating membrane. These data have allowed us to confidently identify a variety of C. parvum stages in cell culture at high resolution. With this, we provide new insight into C. parvum - host cell interactions and highlight future opportunities for investigating and targeting receptor-mediated interactions between Cryptosporidium life cycle stages and host cells. Copyright © 2011 Elsevier Ltd. All rights reserved.

  17. RILEM International Symposium on Materials and Joints in Timber Structures

    CERN Document Server

    Reinhardt, H-W; Garrecht, Harald

    2014-01-01

    This book contains the contributions from the RILEM International Symposium on Materials and Joints in Timber Structures that was held in Stuttgart, Germany from October 8 to 10, 2013. It covers recent developments in the materials and the joints used in modern timber structures. Regarding basic wooden materials, the contributions highlight the widened spectrum of products comprising cross-laminated timber, glulam and LVL from hardwoods and block glued elements. Timber concrete compounds, cement bonded wood composites and innovative light-weight constructions represent increasingly employed alternatives for floors, bridges and facades. With regard to jointing technologies, considerable advances in both mechanical connections and glued joints are presented. Self-tapping screws have created unprecedented options for reliable, strong as well as ductile joints and reinforcement technologies. Regarding adhesives, which constitute the basis of the jointing/laminating technology of modern timber products, extended o...

  18. Durability of timber silencers at Wairakei geothermal steam field

    Energy Technology Data Exchange (ETDEWEB)

    Hedley, M E

    1979-02-01

    After early failures of reinforced concrete silencers and because of high costs of concrete-lined steel structures, preliminary tests were undertaken to assess the suitability of timber for silencer construction. Tests indicated that radiata pine treated with pentachlorophenol/oil or untreated red beech had most potential for timber silencer fabrication. One prototype silencer of each material was constructed and both were installed on operational bores in 1965. The red beech silencer had a service life of 4 years. The radiata pine silencer operated for 12/sup 1///sub 2/ years, although replacement had been recommended 1 year before this time expired. The performance of this silencer encouraged the general use of timber for silencer construction and further units were built. Procurement of satisfactory grades of timber has proved difficult and has limited silencer fabrication. Ways of improving timber supply, which require modification of silencer design, are discussed.

  19. Form Exploration of Folded Plate Timber Structures based on Performance Criteria

    DEFF Research Database (Denmark)

    Falk, Andreas; Buelow, Peter Von

    2011-01-01

    This paper presents an explorative study on applications of cross-laminated timber (CLT) elements in shell structures. Previous studies of plate tensegrity, folded plate roofs interacting with stabilising steel-based systems and studies inspired by origami show a widening range of possibilities...... to develop timber-based shells. Steadily rising interest in rationality during pre-fabrication, transport and on-site construction in contemporary industrialised production increases the competitiveness of CLT-based elements and systems and the architectural applications are getting more common and more...... experimental. Folded plate structures which are the focus of this paper present several issues of structural importance – potential mechanisms, subdivision of surfaces etc. – and the hereby presented study aims at exploring developed typologies, using computer tools for developed optimisation procedures...

  20. Moisture Content Monitoring of a Timber Footbridge

    Directory of Open Access Journals (Sweden)

    Niclas Björngrim

    2016-03-01

    Full Text Available Construction of modern timber bridges has greatly increased during the last 20 years in Sweden. Wood as a construction material has several advantageous properties, e.g., it is renewable, sustainable, and aesthetically pleasing, but it is also susceptible to deterioration. To protect wood from deterioration and ensure the service life, the wood is either treated or somehow covered. This work evaluates a technology to monitor the moisture content in wood constructions. Monitoring the moisture content is important both to verify the constructive protection and for finding areas with elevated levels of moisture which might lead to a microbiological attack of the wood. In this work, a timber bridge was studied. The structure was equipped with six wireless sensors that measured the moisture content of the wood and the relative humidity every hour. Data for 744 days of the bridge are presented in this paper. Results show that the technology used to monitor the bridge generally works; however, there were issues due to communication problems and malfunction of sensors. This technology is promising for monitoring the state of wood constructions, but a more reliable sensor technology is warranted continuous remote monitoring of wood bridges over long periods of time.

  1. Multiplex flow cytometry barcoding and antibody arrays identify surface antigen profiles of primary and metastatic colon cancer cell lines.

    Directory of Open Access Journals (Sweden)

    Kumar Sukhdeo

    Full Text Available Colon cancer is a deadly disease affecting millions of people worldwide. Current treatment challenges include management of disease burden as well as improvements in detection and targeting of tumor cells. To identify disease state-specific surface antigen signatures, we combined fluorescent cell barcoding with high-throughput flow cytometric profiling of primary and metastatic colon cancer lines (SW480, SW620, and HCT116. Our multiplexed technique offers improvements over conventional methods by permitting the simultaneous and rapid screening of cancer cells with reduced effort and cost. The method uses a protein-level analysis with commercially available antibodies on live cells with intact epitopes to detect potential tumor-specific targets that can be further investigated for their clinical utility. Multiplexed antibody arrays can easily be applied to other tumor types or pathologies for discovery-based approaches to target identification.

  2. Spatial ecology of timber rattlesnakes on the hardwood ecosystem experiment: pre-treatment results

    Science.gov (United States)

    Brian J. MacGowan; Zachary J. Walker

    2013-01-01

    The timber rattlesnake (Crotalus horridus) is a species of conservation concern throughout much of its geographic range and may serve as a sentinel species in investigations of the effects of timber harvesting on forest reptiles. Our objective was to determine the effect of even-aged timber management regimes on timber rattlesnake home range and...

  3. System Reliability of Timber Structures with Ductile Behaviour

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; Čizmar, Dean

    2011-01-01

    The present paper considers the evaluation of timber structures with the focus on robustness due to connection ductility. The robustness analysis is based on the structural reliability framework applied to a simplified mechanical system. The structural timber system is depicted as a parallel system....... An evaluation method of the ductile behaviour is introduced. For different ductile behaviours, the system reliability is estimated based on Monte Carlo simulation. A correlation between the strength of the structural elements is introduced. The results indicate that the reliability of a structural timber system...

  4. Robustness Issues for Design of Innovative Timber Structures

    DEFF Research Database (Denmark)

    Hald, Frederik; Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2013-01-01

    Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious conse-quences in case of failure. The present paper summaries issues with respect to robustness of timber structures. Two different...... large span timber structures are analyzed and based on these analyses the paper presents guidelines for the future development of innovative timber struc-tures which are robust with respect to design and execution errors, unforeseen degradation and other potential hazards....

  5. Moment Capacity of Timber Reinforced with Punched Metal Plate Fasteners

    DEFF Research Database (Denmark)

    Nielsen, Jacob; Ellegaard, Peter

    When designing timber trusses it is often found that the cross section controlling the dimensions of the top chord is located at a joint with a moment peak. However, the timber volume affected by the moment peak is rather limited and by embedding a punched metal plate in this area a reinforcement...... of the section is obtained, resulting in a more economic truss design. In order to develop design methods for sections with plate reinforcement, bending tests have been made. The timber is Swedish spruce of strength class K-18(S8) and K-24(S10) with a thickness of 45 mm. The punched metal plate is from Gang...

  6. A Study of Bond of Structural Timber and Carbon Fiber Reinforced Polymer Plate

    Directory of Open Access Journals (Sweden)

    Yongtaeg LEE

    2015-11-01

    Full Text Available The increase of well-being culture of problem related to environmental depletion of resource is not the growing interest in timber the natural material of construction markets. Also, the perception for historic preservation has been increased in respond to heightened interest. However, it is fairly difficult for architectural properties to maintain their durability because it was made by timber construction. Preventing traditional structure from damage and structural performance reduction is paramount in maintenance problem. A number of studies of reinforced method have been conducted in order to solve such a problem. In this paper, external bonded reinforcement and near-surface mounted was used as a way to reinforce timber structure’s durability. Bond strength for specimens with different bond length was investigated. As a result showed, maximum bond strength in bond length 300 mm from all method, was found to be not increased of bond strength over the certain bond length.DOI: http://dx.doi.org/10.5755/j01.ms.21.4.9702

  7. Characteristics of Timbers Dried Using Kiln Drying and Radio Frequency-Vacuum Drying Systems

    Directory of Open Access Journals (Sweden)

    Rabidin Zairul Amin

    2017-01-01

    Full Text Available Heavy hardwoods are difficult-to-dry timbers as they are prone to checking and internal stresses when dried using a conventional kiln drying system. These timbers are usually dried naturally to reach 15% to 19% moisture content with an acceptable defects. Besides long drying time, timbers at these moisture contents are not suitable for indoor applications since they will further dry and causing, for example, jointing and lamination failures. Drying to a lower moisture content could only be achieved in artificial drying kilns such as conventional kiln, dehumidification kiln, solar kiln, radio frequency-vacuum, etc. The objective of this study was to evaluate the characteristics of 30 mm and 50 mm thick kekatong (Cynometra spp. timber dried using kiln drying (KD and radio frequency-vacuum drying (RFV system. The investigation involved drying time, moisture content (MC variations between and within boards, drying defects, shrinkage, and drying stress. Drying defects include checks (surface, end, and internal checks and warping (bowing, cuping, spring, and twisting. The results showed that RFV drying time was reduced to 50% compared to the KD. RFV dried boards demonstrated a more uniform MC between and within boards. Shrinkage in width and thickness, as well as tangential/radial and volumetric shrinkages were substantially less in RFV boards. The amount of cupping, bowing and spring were very low and negligible in all drying runs. There was no twisting observed in all drying methods. The number of stress-free RFV board was higher than KD. With proper procedure, the RFV technology could be used for drying heavy hardwoods which are difficult to dry in conventional kilns due to excessive drying times and degradation.

  8. Fragment library screening identifies hits that bind to the non-catalytic surface of Pseudomonas aeruginosa DsbA1

    Science.gov (United States)

    Headey, Stephen J.; Vazirani, Mansha; Shouldice, Stephen R.; Coinçon, Mathieu; Tay, Stephanie; Morton, Craig J.; Simpson, Jamie S.; Martin, Jennifer L.

    2017-01-01

    At a time when the antibiotic drug discovery pipeline has stalled, antibiotic resistance is accelerating with catastrophic implications for our ability to treat bacterial infections. Globally we face the prospect of a future when common infections can once again kill. Anti-virulence approaches that target the capacity of the bacterium to cause disease rather than the growth or survival of the bacterium itself offer a tantalizing prospect of novel antimicrobials. They may also reduce the propensity to induce resistance by removing the strong selection pressure imparted by bactericidal or bacteriostatic agents. In the human pathogen Pseudomonas aeruginosa, disulfide bond protein A (PaDsbA1) plays a central role in the oxidative folding of virulence factors and is therefore an attractive target for the development of new anti-virulence antimicrobials. Using a fragment-based approach we have identified small molecules that bind to PaDsbA1. The fragment hits show selective binding to PaDsbA1 over the DsbA protein from Escherichia coli, suggesting that developing species-specific narrow-spectrum inhibitors of DsbA enzymes may be feasible. Structures of a co-complex of PaDsbA1 with the highest affinity fragment identified in the screen reveal that the fragment binds on the non-catalytic surface of the protein at a domain interface. This biophysical and structural data represent a starting point in the development of higher affinity compounds, which will be assessed for their potential as selective PaDsbA1 inhibitors. PMID:28346540

  9. epidemiology of eye diseases among timber workers in owerri

    African Journals Online (AJOL)

    LIVINGSTON

    pinguecula and uveitis, each, accounting for 39.52%, 31.10%, 12.53%, 7.34% and 2.16% respectively ... Timber workers, eye diseases, work environment, prevalence, environmental pollutants. ... there was no interested family member to take.

  10. Profitability of Clerodendrum volubile (eweta) , a non-timber forest ...

    African Journals Online (AJOL)

    Timber Forest product, in Okitipupa, Ondo State Nigeria. Purposive and simple random sampling techniques were used in the selection of markets and respondents. The sample size was 60 and instrument of data collection was structured and ...

  11. Community Based Ecological Monitoring of Non Timber Forest ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Community Based Ecological Monitoring of Non Timber Forest Products in the Nilgiri ... This project will allow Keystone Foundation to design, implement and test a ... traders, forest department officials and other stakeholders in the process.

  12. Creosote treated timber in the Alaskan marine environment : Volume I.

    Science.gov (United States)

    2010-02-01

    ADOT&PF is responsible for many structures that incorporate wood pilings and other timber in Alaska waters. Most are treated with preservative to inhibit marine borers : that will quickly destroy unprotected wood. Creosote is generally the most econo...

  13. Minimizing corrosive action in timber bridges treated with waterborne preservatives

    Science.gov (United States)

    Samuel L. Zelinka; Douglas R. Rammer; James P. Wacker

    2007-01-01

    This work will briefly review published literature and current research activities on the corrosion of metals in contact with wood treated with waterborne alternatives to CCA. In addition, recommendations to minimize these corrosive effects in timber bridges will be discussed.

  14. Impact of timber production and transport costs on stand management

    Science.gov (United States)

    Chris B. LeDoux; Chris B. LeDoux

    1988-01-01

    Evaluates the impact of cable logging technology, transportation network standards, and transport vehicles on stand management. Managers can use results to understand the impact of timber production costs on eastern hardwood management.

  15. Compression strength perpendicular to grain of structural timber and glulam

    DEFF Research Database (Denmark)

    Damkilde, Lars; Hoffmeyer, Preben; Pedersen, Torben N.

    1998-01-01

    The characteristic strength values for compression perpendicular to grain as they appear in EN 338 (structural timber) and EN 1194 (glulam) are currently up for discussion. The present paper provides experimental results based on EN 1193 that may assist in the correct assignment of such strength...... values. The dominant failure mode of glulam specimens is shown to be fundamentally different from that of structural timber specimens. Glulam specimens often show tension perpendicular to grain failure before the compression strength value is reached. Such failure mode is not seen for structural timber....... Nonetheless test results show that the levels of characteristic compression strength perpendicular to grain are of the same order for structural timber and glulam. The values are slightly lower than those appearing in EN 1194 and less than half of those appearing in EN 338. The paper presents a numerical...

  16. Modeling the Effects of Knots in Structural Timber

    DEFF Research Database (Denmark)

    Foley, Christina

    The main purpose of the pursued research presented in this thesis is to increase knowledge of the effects of knots in structural timber so that characteristics of weaker timber may be determined and applied to improve current grading techniques. In the process, a three-dimensional fiber paradigm...... are given to Shigo's knot formation theory, and thus predicts two separate patterns of fiber direction within annual growth layers related to live knots. In order to determine the possibility to practically and non destructively predict local material directions in structural timber with the three...... was established, which describes variations of radial growth direction and fiber orientation related to knots in timber. The adaptability of the paradigm allows practically any softwood knot and its effect on surrounding wood material to be modeled with an accuracy that is limited only by input data. The knot...

  17. Probabilistic representation of duration of load effects in timber structures

    DEFF Research Database (Denmark)

    Svensson, Staffan

    2011-01-01

    Reliability analysis of structures for the purpose of code calibration or reliability verification of specific structures requires that the relevant failure modes are represented and analyzed. For structural timber, sustaining a life load, two failure cases for each failure mode have......-based design of timber structures in terms of a modification factor View the MathML source which is multiplied on the short-term resistance of the timber material. The scenario of a beam subject to office space life loads is analyzed and the modification factor View the MathML source is calibrated by using...... to be considered. These two cases are maximum load level exceeding load-carrying capacity and damage accumulation (caused by the load and its duration) leading to failure. The effect of both load intensity and load duration on the capacity of timber has been an area of large interest over the last decades...

  18. 26 CFR 1.611-3 - Rules applicable to timber.

    Science.gov (United States)

    2010-04-01

    ..., the total quantity under consideration, and the location of the timber in question with reference to... or shares, royalties and rentals, valuation for local or State taxation, partnership accountings...

  19. structural reliability of the nigerian grown abura timber bridge beam

    African Journals Online (AJOL)

    ENGR. J. I. AGUWA

    2013-07-02

    Jul 2, 2013 ... Structural analysis and deterministic design of a timber bridge beam using the Nigerian ... practice especially when it involves naturally occuring materials .... the beam due to distributed loads is; from [15]. (4). It is assumed that ...

  20. Influence of Compression Stresses on Timber Potentials of ...

    African Journals Online (AJOL)

    Eucalyptus camaldulensis Denhn in North-Western Nigeria. *1A. ... further research should be carried out on wood in service to study the peculiarities of timber behaviour under actual .... eastern Nigeria, Neem (Azadirachta indica) was found.

  1. An experimental study on damage detection of structures using a timber beam

    International Nuclear Information System (INIS)

    Choi, Fook Choon; Li, Jianchun; Samali, Bijan; Crews, Keith

    2007-01-01

    Using vibration methods for the damage detection and structural health monitoring in bridge structures is rapidly developing. However, very little work has so far been reported on timber bridges. This paper intends to address such shortcomings by experimental investigation on a timber beam using a vibration based method to detect damage. A promising damage detection algorithm based on modal strain energy was adopted and modified to locate/evaluate damage. A laboratory investigation was conducted on a timber beam inflicted with various damage scenarios using modal tests. The modal parameters obtained from the undamaged and damaged state of the test beam were used in the computation of damage index, were then applied using a damage detection algorithm utilising modal strain energy and a statistical approach to detect location of damage. A mode shape reconstruction technique was used to enhance the capability of the damage detection algorithm with limited number of sensors. The test results and analysis show that location of damage can be accurately identified with limited sensors. The modified method is less dependent on the number of modes selected and can detect damage with a higher degree of confidence

  2. Timber resource statistics for the Yakataga inventory unit, Alaska, 1976.

    Science.gov (United States)

    Willem W.S. van Hees

    1985-01-01

    Statistics on forest area, total gross and net timber volumes, and annual net growth and mortality are presented from the 1976 timber inventory of the Yakataga unit, Alaska. Timberland area is estimated at 209.3 thousand acres (84.7 thousand ha), net growing stock volume at 917.1 million cubic feet (26.0 million m3), and annual net growth and...

  3. Dowelled structural connections in laminated bamboo and timber

    OpenAIRE

    Reynolds, Thomas Peter; Sharma, Bhavna; Harries, Kent; Ramage, Michael Hector

    2015-01-01

    Structural sections of laminated bamboo can be connected using methods common in timber engineering, however the different material properties of timber and laminated bamboo suggest that the behaviour of connections in the two materials would not be the same. This study investigates the dowelled connection, in which a connector is passed through a hole in the material, and load is resisted by shear in the connector and embedment into the surrounding material. Steel dowels were used in a conne...

  4. T-section glulam timber bridge modules : modeling and performance

    Science.gov (United States)

    Paul A. Morgan; Steven E. Taylor; Michael A. Ritter; John M. Franklin

    1999-01-01

    This paper describes the design, modeling, and testing of two portable timber bridges, each consisting of two noninterconnected longitudinal glued-laminated timber (glulam) deck panels 1.8 m (6 ft) wide. One bridge is 12.2 m (40 ft) long while the other bridge is 10.7 m (35 ft) long. The deck panels are fabricated in a unique double-tee cross section. The bridges...

  5. Reliability based Robustness of Timber Structures through NDT Data Updating

    DEFF Research Database (Denmark)

    Sousa, Hélder S.; Sørensen, John Dalsgaard; Kirkegaard, Poul Henning

    2011-01-01

    This work presents a framework for reliability-based assessment of timber structures / members using data gathered from non-destructive test results. These results are used for modeling an update of the mechanical characteristics of timber, using Bayesian methods. Results gathered from ultrasound...... of the structure, thus, being possible to evaluate reliability based in time dependent factors, as well to categorize that structure in terms of robustness. For exemplification of the underlined concepts, three different types of structures are studied....

  6. Parametric Evaluation of Racking Performance of Platform Timber Framed Walls

    OpenAIRE

    Dhonju, R..; D’Amico, B..; Kermani, A..; Porteous, J..; Zhang, B..

    2017-01-01

    This paper provides a quantitative assessment of the racking performance of partially anchored timber framed walls, based on experimental tests. A total of 17 timber framed wall specimens, constructed from a combination of materials under different load configurations, were tested. The experimental study was designed toexamine the influence of a range of geometrical parameters, such as fastener size and spacings, wall length, arrangement of studs and horizontal members, as well as the effect ...

  7. Section of mechanized timbering of an installation layer

    Energy Technology Data Exchange (ETDEWEB)

    Gur' yev, D K; Tomashevskiy, L P; Vorotnyak, M V

    1980-07-28

    A section of mechanized timbering of an installation layer is suggested which includes roof timber, base with cantilever, hydrostand, safety guard which consists of a lower and upper shield, where the lower shield in the lower part has a roll whose upper part is hinged to the cantilever base, and the upper shield is hinged to the roof timber. Its lower part is connected by a linkage to the cantilever of the base. There is also a correcting device, tie rod and holder with rolled material. In order to guarantee stability of the timbering section during work on thick beds and adaptability of the roof timber to the roofing of the bed, the connection between the cantilever and the lower part of the upper shield is made from a longitudinal slit on the cantilever and slide bar placed in it. It is attached by a pin to the lower part of the upper shield. In this case the tie bar is hinged to the linkage and by means of the slide bar to the roof timber, while the correcting device is made of an extension-type support with level which contacts with the wedge and the tightening element installed on the cantilever of the base.

  8. Timbered masonry for earthquake resistance in Europe

    Directory of Open Access Journals (Sweden)

    Dutu, A.

    2012-12-01

    Full Text Available Europe is a continent that is subject to significant seismic activity. Thus, the buildings’ seismic behaviour must be analysed, including not only the new structures, designed under more rigorous codes, but also older ones. This article examines a traditional type of building that uses timber frame/masonry, which is found in Portugal, Turkey, France, England, Greece, Romania, Italy, Spain, Germany and Scandinavia. Although the structures differ in terms of construction details, their structural system is basically the same: the wooden structural system bears mainly the horizontal loads while the masonry supports the gravity loads. The study includes a brief report on the seismicity of each country where this traditional type of building made of timbered framed masonry is found, together with the description of these buildings’ constructive systems.

    Europa es un continente que está sujeto a una significativa actividad sísmica. Por esta razón, se debe analizar el comportamiento sísmico, no sólo de las nuevas estructuras, diseñadas sobre la base de códigos más exigentes, sino también de los diversos tipos de estructuras antiguas. En este artículo se analizan las estructuras constituidas por mampostería y madera, que se pueden encontrar en Portugal, Turquía, Francia, Inglaterra, Grecia, Rumania, Italia, España, Alemania y Escandinavia. Aunque estas estructuras presentan diferencias en cuanto a detalles constructivos, su sistema estructural es idéntico: el sistema estructural de madera absorbe principalmente las cargas horizontales, mientras que la mampostería garantiza la resistencia a la acción de la gravedad. El estudio presentado incluye un breve informe acerca de la sismicidad de los países en que existe el tipo de construcción mencionado, conjuntamente con la descripción de los sistemas constructivos específicos de cada país.

  9. Hydrous ferric oxide: evaluation of Cd-HFO surface complexation models combining Cd(K) EXAFS data, potentiometric titration results, and surface site structures identified from mineralogical knowledge.

    Science.gov (United States)

    Spadini, Lorenzo; Schindler, Paul W; Charlet, Laurent; Manceau, Alain; Vala Ragnarsdottir, K

    2003-10-01

    The surface properties of ferrihydrite were studied by combining wet chemical data, Cd(K) EXAFS data, and a surface structure and protonation model of the ferrihydrite surface. Acid-base titration experiments and Cd(II)-ferrihydrite sorption experiments were performed within 3titration data could be adequately modeled by triple bond Fe- OH(2)(+1/2)-H(+)triple bond Fe-OH(-1/2),logk((int))=-8.29, assuming the existence of a unique intrinsic microscopic constant, logk((int)), and consequently the existence of a single significant type of acid-base reactive functional groups. The surface structure model indicates that these groups are terminal water groups. The Cd(II) data were modeled assuming the existence of a single reactive site. The model fits the data set at low Cd(II) concentration and up to 50% surface coverage. At high coverage more Cd(II) ions than predicted are adsorbed, which is indicative of the existence of a second type of site of lower affinity. This agrees with the surface structure and protonation model developed, which indicates comparable concentrations of high- and low-affinity sites. The model further shows that for each class of low- and high-affinity sites there exists a variety of corresponding Cd surface complex structure, depending on the model crystal faces on which the complexes develop. Generally, high-affinity surface structures have surface coordinations of 3 and 4, as compared to 1 and 2 for low-affinity surface structures.

  10. System identification of timber masonry walls using shaking table test

    Science.gov (United States)

    Roy, Timir B.; Guerreiro, Luis; Bagchi, Ashutosh

    2017-04-01

    Dynamic study is important in order to design, repair and rehabilitation of structures. It has played an important role in the behavior characterization of structures; such as: bridges, dams, high rise buildings etc. There had been substantial development in this area over the last few decades, especially in the field of dynamic identification techniques of structural systems. Frequency Domain Decomposition (FDD) and Time Domain Decomposition are most commonly used methods to identify modal parameters; such as: natural frequency, modal damping and mode shape. The focus of the present research is to study the dynamic characteristics of typical timber masonry walls commonly used in Portugal. For that purpose, a multi-storey structural prototype of such wall has been tested on a seismic shake table at the National Laboratory for Civil Engineering, Portugal (LNEC). Signal processing has been performed of the output response, which is collected from the shaking table experiment of the prototype using accelerometers. In the present work signal processing of the output response, based on the input response has been done in two ways: FDD and Stochastic Subspace Identification (SSI). In order to estimate the values of the modal parameters, algorithms for FDD are formulated and parametric functions for the SSI are computed. Finally, estimated values from both the methods are compared to measure the accuracy of both the techniques.

  11. Dynamics of Timber Market Integration in Sweden

    Directory of Open Access Journals (Sweden)

    Vishal Chandr Jaunky

    2015-12-01

    Full Text Available This paper addresses the performance of the timber markets (Scots pine, Pinus silvestris L. and Norway spruce, Picea abies (L. Karst. by evaluating the order of market integration in three Swedish regions (Central, Northern, and Southern. Quarterly data of delivery prices are employed over the period 1999Q1–2012Q4. Various unit root and cointegration tests have been computed. The results indicate that the variables are integrated of first order and co-integrated, especially after controlling for structural breaks. This supports the law-of-one-price hypothesis (LOP. However, the effects of structural shocks on forestry are arguably significant and these are controlled for while performing a vector error-correction mechanism (VECM-based Granger-causality test. Bi-directional causality between the Northern and central markets is uncovered in the short-run. In the long-run, a similar causal effect is detected between Northern and Southern markets while the central market emerges as the price leader. Further investigation is carried out using variance decompositions and impulse response functions and these approaches also tend to confirm the existence of a single market well, as price interdependence between markets.

  12. Bathymetry Surface Layer used to identify, delineate and classify moderate-depth benthic habitats around St. John, USVI

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This image represents a 2x2 meter resolution bathymetry surface of the moderate-depth portion of the NPS's Virgin Islands Coral Reef National Monument, south of St....

  13. Identifying representative symbology for low visibility operations/surface movement guidance and control system (LVO/SMGCS) paper charts

    Science.gov (United States)

    2015-05-04

    The Volpe Center developed a questionnaire to examine the representativeness of symbol shapes and the usefulness of information depicted on Low Visibility Operations/Surface Movement Guidance and Control System (LVO/SMGCS) paper charts. One-hundred f...

  14. Evaluating carbon storage, timber harvest, and habitat possibilities for a Western Cascades (USA) forest landscape.

    Science.gov (United States)

    Kline, Jeffrey D; Harmon, Mark E; Spies, Thomas A; Morzillo, Anita T; Pabst, Robert J; McComb, Brenda C; Schnekenburger, Frank; Olsen, Keith A; Csuti, Blair; Vogeler, Jody C

    2016-10-01

    Forest policymakers and managers have long sought ways to evaluate the capability of forest landscapes to jointly produce timber, habitat, and other ecosystem services in response to forest management. Currently, carbon is of particular interest as policies for increasing carbon storage on federal lands are being proposed. However, a challenge in joint production analysis of forest management is adequately representing ecological conditions and processes that influence joint production relationships. We used simulation models of vegetation structure, forest sector carbon, and potential wildlife habitat to characterize landscape-level joint production possibilities for carbon storage, timber harvest, and habitat for seven wildlife species across a range of forest management regimes. We sought to (1) characterize the general relationships of production possibilities for combinations of carbon storage, timber, and habitat, and (2) identify management variables that most influence joint production relationships. Our 160 000-ha study landscape featured environmental conditions typical of forests in the Western Cascade Mountains of Oregon (USA). Our results indicate that managing forests for carbon storage involves trade-offs among timber harvest and habitat for focal wildlife species, depending on the disturbance interval and utilization intensity followed. Joint production possibilities for wildlife species varied in shape, ranging from competitive to complementary to compound, reflecting niche breadth and habitat component needs of species examined. Managing Pacific Northwest forests to store forest sector carbon can be roughly complementary with habitat for Northern Spotted Owl, Olive-sided Flycatcher, and red tree vole. However, managing forests to increase carbon storage potentially can be competitive with timber production and habitat for Pacific marten, Pileated Woodpecker, and Western Bluebird, depending on the disturbance interval and harvest intensity chosen

  15. Procurement of timber for the Finnish forest industries

    International Nuclear Information System (INIS)

    Hakkila, P.

    1995-01-01

    The procurement of timber to the forest industries in the Nordic countries is based on the log-length or shortwood system, and employs load-carrying forwarders and chainsaw of single-grip harvesters. This technology is characterized by high productivity, safety, suitability for small-sized trees, high recovery of timber, and environmental friendliness. About one fourth of the industrial timber in the whole world is harvested using the log-length system. The challenge of ecological sustainability, multiple use of forests, adoption of thinnings as a tool of management, trend toward improved utilization of forest biomass, and shift from natural forests to plantations all increase the global interest in the log-length system. The paper presents a review of the Finnish forest sector, the technology of timber harvesting and transport, productivity of logging work, and costs of timber at the mill. The highly mechanized logging systems of the forest industries and the lighter technology of self-employed forest owners are discussed separately. Furthermore, the use of residual biomass as a source of clean and renewable energy, the Finnish logging machine industry, and forest operations research in Finland are also reviewed. (46 refs., 35 figs., 8 tabs.)

  16. Supply Chain Planning for a Timber Harvesting Plus Sale Tender

    Directory of Open Access Journals (Sweden)

    Josef Holoubek

    2015-01-01

    Full Text Available Since 2010, the Czech State Forest Enterprise has been inviting timber-harvesting tenders while insisting on the forestry company purchasing the timber from the felled trees as well. To win, a tender must offer the greatest difference between the price of the timber purchased and the cost of the operations. Thus, the forest companies are now facing new problem: apart from minimizing the logging costs they are searching for a cross-cutting and mill-distribution strategy that maximizes the selling price of the harvested timber. The optimization model devised by the present paper provides support for finding an optimal timber selling strategy and, as an important contribution, include a detailed plan for cross-cutting the logs and assign them to the particular customers. We keep the support accessible via common office software and the cross-cutting and customer-assigning problem is formulated as a linear programming model for EXCEL, a particular real-world problem is solved and, using expert comparison, the model appears to provide very good results.

  17. Socio-ecological costs of Amazon nut and timber production at community household forests in the Bolivian Amazon.

    Science.gov (United States)

    Soriano, Marlene; Mohren, Frits; Ascarrunz, Nataly; Dressler, Wolfram; Peña-Claros, Marielos

    2017-01-01

    The Bolivian Amazon holds a complex configuration of people and forested landscapes in which communities hold secure tenure rights over a rich ecosystem offering a range of livelihood income opportunities. A large share of this income is derived from Amazon nut (Bertholletia excelsa). Many communities also have long-standing experience with community timber management plans. However, livelihood needs and desires for better living conditions may continue to place these resources under considerable stress as income needs and opportunities intensify and diversify. We aim to identify the socioeconomic and biophysical factors determining the income from forests, husbandry, off-farm and two keystone forest products (i.e., Amazon nut and timber) in the Bolivian Amazon region. We used structural equation modelling tools to account for the complex inter-relationships between socioeconomic and biophysical factors in predicting each source of income. The potential exists to increase incomes from existing livelihood activities in ways that reduce dependency upon forest resources. For example, changes in off-farm income sources can act to increase or decrease forest incomes. Market accessibility, social, financial, and natural and physical assets determined the amount of income community households could derive from Amazon nut and timber. Factors related to community households' local ecological knowledge, such as the number of non-timber forest products harvested and the number of management practices applied to enhance Amazon nut production, defined the amount of income these households could derive from Amazon nut and timber, respectively. The (inter) relationships found among socioeconomic and biophysical factors over income shed light on ways to improve forest-dependent livelihoods in the Bolivian Amazon. We believe that our analysis could be applicable to other contexts throughout the tropics as well.

  18. Potential for Small Unmanned Aircraft Systems Applications for Identifying Groundwater-Surface Water Exchange in a Meandering River Reach

    Science.gov (United States)

    Pai, H.; Malenda, H. F.; Briggs, M. A.; Singha, K.; González-Pinzón, R.; Gooseff, M. N.; Tyler, S. W.

    2017-12-01

    The exchange of groundwater and surface water (GW-SW), including dissolved constituents and energy, represents a critical yet challenging characterization problem for hydrogeologists and stream ecologists. Here we describe the use of a suite of high spatial resolution remote sensing techniques, collected using a small unmanned aircraft system (sUAS), to provide novel and complementary data to analyze GW-SW exchange. sUAS provided centimeter-scale resolution topography and water surface elevations, which are often drivers of exchange along the river corridor. Additionally, sUAS-based vegetation imagery, vegetation-top elevation, and normalized difference vegetation index mapping indicated GW-SW exchange patterns that are difficult to characterize from the land surface and may not be resolved from coarser satellite-based imagery. We combined these data with estimates of sediment hydraulic conductivity to provide a direct estimate of GW "shortcutting" through meander necks, which was corroborated by temperature data at the riverbed interface.

  19. 36 CFR 13.485 - Subsistence use of timber and plant material.

    Science.gov (United States)

    2010-07-01

    ... cutting of standing timber by local rural residents for appropriate subsistence uses, such as firewood or... materials for subsistence uses, and the noncommerical gathering of dead or downed timber for firewood, shall...

  20. Identifying active surface phases for metal oxide electrocatalysts: a study of manganese oxide bi-functional catalysts for oxygen reduction and water oxidation catalysis

    DEFF Research Database (Denmark)

    Su, Hai-Yan; Gorlin, Yelena; Man, Isabela Costinela

    2012-01-01

    Progress in the field of electrocatalysis is often hampered by the difficulty in identifying the active site on an electrode surface. Herein we combine theoretical analysis and electrochemical methods to identify the active surfaces in a manganese oxide bi-functional catalyst for the oxygen...... reduction reaction (ORR) and the oxygen evolution reaction (OER). First, we electrochemically characterize the nanostructured α-Mn2O3 and find that it undergoes oxidation in two potential regions: initially, between 0.5 V and 0.8 V, a potential region relevant to the ORR and, subsequently, between 0.8 V...

  1. Strontium isotopes reveal distant sources of architectural timber in Chaco Canyon, New Mexico

    OpenAIRE

    English, Nathan B.; Betancourt, Julio L.; Dean, Jeffrey S.; Quade, Jay

    2001-01-01

    Between A.D. 900 and 1150, more than 200,000 conifer trees were used to build the prehistoric great houses of Chaco Canyon, New Mexico, in what is now a treeless landscape. More than one-fifth of these timbers were spruce (Picea) or fir (Abies) that were hand-carried from isolated mountaintops 75–100 km away. Because strontium from local dust, water, and underlying bedrock is incorporated by trees, specific logging sites can be identified by comparing 87Sr/86Sr ratios in construction beams fr...

  2. The complexity of identifying Ryu-Takayanagi surfaces in AdS{sub 3}/CFT{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Bao, N.; Chatwin-Davies, A. [Walter Burke Institute for Theoretical Physics, California Institute of Technology,Pasadena, CA 91125 (United States)

    2016-11-07

    We present a constructive algorithm for the determination of Ryu-Takayanagi surfaces in AdS{sub 3}/CFT{sub 2} which exploits previously noted connections between holographic entanglement entropy and max-flow/min-cut. We then characterize its complexity as a polynomial time algorithm.

  3. Protection of timber constructions by using electro osmotic pulsing technology (PLEOT)

    OpenAIRE

    Treu, A.; Larnoy, E.; Ribeiro Nunes, L. M.; Duarte, S.; Halvorsen, H.

    2011-01-01

    Timber constructions are often built in combination with other materials such as concrete. These materials can influence the timber construction. Moist concrete can e.g. lead to development of molds which creates an unhealthy living area for people. Furthermore, moisture in wood buildings can negatively affect the wood material, which can lead to negative biological activity in timber and possible reduction of strength properties of timber constructions. The present paper introduces ...

  4. Heterogeneous Amyloid β-Sheet Polymorphs Identified on Hydrogen Bond Promoting Surfaces Using 2D SFG Spectroscopy.

    Science.gov (United States)

    Ho, Jia-Jung; Ghosh, Ayanjeet; Zhang, Tianqi O; Zanni, Martin T

    2018-02-08

    Two-dimensional sum-frequency generation spectroscopy (2D SFG) is used to study the structures of the pentapeptide FGAIL on hydrogen bond promoting surfaces. FGAIL is the most amyloidogenic portion of the human islet amyloid polypeptide (hIAPP or amylin). In the presence of a pure gold surface, FGAIL does not form ordered structures. When the gold is coated with a self-assembled monolayer of mercaptobenzoic acid (MBA), 2D SFG spectra reveal features associated with β-sheets. Also observed are cross peaks between the FGAIL peptides and the carboxylic acid groups of the MBA monolayer, indicating that the peptides are in close contact with the surface headgroups. In the second set of samples, FGAIL peptides chemically ligated to the MBA monolayer also exhibited β-sheet features but with a much simpler spectrum. From simulations of the experiments, we conclude that the hydrogen bond promoting surface catalyzes the formation of both parallel and antiparallel β-sheet structures with several different orientations. When ligated, parallel sheets with only a single orientation are the primary structure. Thus, this hydrogen bond promoting surface creates a heterogeneous distribution of polymorph structures, consistent with a concentration effect that allows nucleation of many different amyloid seeding structures. A single well-defined seed favors one polymorph over the others, showing that the concentrating influence of a membrane can be counterbalanced by factors that favor directed fiber growth. These experiments lay the foundation for the measurement and interpretation of β-sheet structures with heterodyne-detected 2D SFG spectroscopy. The results of this model system suggest that a heterogeneous distribution of polymorphs found in nature are an indication of nonselective amyloid aggregation whereas a narrow distribution of polymorph structures is consistent with a specific protein or lipid interaction that directs fiber growth.

  5. A Probabilistic Approach for Robustness Evaluation of Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    of Structures and a probabilistic modelling of the timber material proposed in the Probabilistic Model Code (PMC) of the Joint Committee on Structural Safety (JCSS). Due to the framework in the Danish Code the timber structure has to be evaluated with respect to the following criteria where at least one shall...... to criteria a) and b) the timber frame structure has one column with a reliability index a bit lower than an assumed target level. By removal three columns one by one no significant extensive failure of the entire structure or significant parts of it are obatined. Therefore the structure can be considered......A probabilistic based robustness analysis has been performed for a glulam frame structure supporting the roof over the main court in a Norwegian sports centre. The robustness analysis is based on the framework for robustness analysis introduced in the Danish Code of Practice for the Safety...

  6. Reliability Analysis of Timber Structures through NDT Data Upgrading

    DEFF Research Database (Denmark)

    Sousa, Hélder; Sørensen, John Dalsgaard; Kirkegaard, Poul Henning

    The first part of this document presents, in chapter 2, a description of timber characteristics and common used NDT and MDT for timber elements. Stochastic models for timber properties and damage accumulation models are also referred. According to timber’s properties a framework is proposed...... for a safety reassessment procedure. For that purpose a theoretical background for structural reliability assessment including probabilistic concepts for structural systems and stochastic models are given in chapter 3. System models, both series and parallel systems, are presented as well as methods...... for robustness are dealt in chapter 5. The second part of this document begins in chapter 6, where a practical application of the premise definitions and methodologies is given through the implementation of upgraded models with NDT and MDT data. Structural life-cycle is, therefore, assessed and reliability...

  7. Multi-Scalar Modelling for Free-form Timber Structures

    DEFF Research Database (Denmark)

    Poinet, Paul; Nicholas, Paul; Tamke, Martin

    2016-01-01

    .The research explores the design probe of free-form structures composed of glue-laminated timber beams and looks at the different types of data that need to be shared among each discipline and across multiple scales from which different levels of resolution can be defined. A particular focus lies...... in the segmentation strategy of glue-laminated timber structures that depend on structural requirements and the different types of constraints related to fabrication, transportation and assembly. Where current working practices decouple segmentation processes within a discrete digital workflow, this research aims...... and techniques as a means to work within a continuous design environment in which an abstract network of timber beams is iteratively updated through geometrical and structural optimizations at different levels of resolution....

  8. Risks, Information and Short-Run Timber Supply

    Directory of Open Access Journals (Sweden)

    Francesca Rinaldi

    2013-12-01

    Full Text Available Efforts to increase wood mobilization have highlighted the need to appraise drivers of short-run timber supply. The current study aims to shed further light on harvesting decisions of private forest owners, by investigating optimal harvesting under uncertainty, when timber revenues are invested on financial markets and uncertainty is mitigated by news releases. By distinguishing between aggregate economic risk and sector specific risks, the model studies in great detail optimal harvesting-investment decisions, with particular emphasis on the non-trivial transmission of risk on optimal harvesting, and on the way private forest owners react to news and information. The analysis of the role played by information in harvesting decisions is a novelty in forest economic theory. The presented model is highly relevant from a policy—information is a commonly used forest policy instrument—as well as a practical perspective, since the mechanism of risk transmission is at the basis of timber pricing.

  9. Impacts on South Carolina timber production over the last five decades.

    Science.gov (United States)

    Jinglong Mo; Thomas Straka; Richard Harper

    2013-01-01

    Timberland ownership patterns and national forest timber harvesting policy have undergone significant changes in South Carolina over the past five decades. Timber output studies for the state commonly focused on short time frames and seldom addressed timberland ownership patterns in detail. We describe fifty-year timber output for South Carolina, allowing us to address...

  10. Development of a six-year research needs assessment for timber transportation structures

    Science.gov (United States)

    Terry J. Wipf; Michael A. Ritter; Sheila Rimal Duwadi; Russell C. Moody

    1993-01-01

    A timber bridge, once a thing of the past, is now becoming a thing of the present. Interest in timber bridges and other transportation structures has been rapidly increasing. Much of this is due to new technologies in design and construction as well as advances in material manufacturing and presevative treatments. Although timber bridges and other transportation...

  11. Forensic timber identification: It's time to integrate disciplines to combat illegal logging

    Science.gov (United States)

    Eleanor E. Dormontt; Markus Boner; Birgit Braun; Gerhard Breulmann; Bernd Degen; Edgard Espinoza; Shelley Gardner; Phil Guillery; John C. Hermanson; Gerald Koch; Soon Leong Lee; Milton Kanashiro; Anto Rimbawanto; Darren Thomas; Alex C. Wiedenhoeft; Yafang Yin; Johannes Zahnen; Andrew J. Lowe

    2015-01-01

    The prosecution of illegal logging crimes is hampered by a lack of available forensic timber identification tools, both for screening of suspectmaterial and definitive identification of illegally sourcedwood. Reputable timber traders are also struggling to police their own supply chains and comply with the growing requirement for due diligence with respect to timber...

  12. Robustness Analysis of a Timber Structure with Ductile Behaviour in Compression

    DEFF Research Database (Denmark)

    Čizmar, Dean; Sørensen, John Dalsgaard; Kirkegaard, Poul Henning

    2011-01-01

    This paper presents a probabilistic approach for structural robustness assessment for a timber structure built a few years ago. The robustness analysis is based on a structural reliability based framework for robustness assessment. The complex timber structure with a large number of failure modes...... material ductility of timber is taken into account. The robustness is expressed and evaluated by a robustness index....

  13. The 1993 timber assessment market model: structure, projections, and policy simulations.

    Science.gov (United States)

    Darius M. Adams; Richard W. Haynes

    1996-01-01

    The 1993 timber assessment market model (TAMM) is a spatial model of the solidwood and timber inventory elements of the U.S. forest products sector. The TAMM model provides annual projections of volumes and prices in the solidwood products and sawtimber stumpage markets and estimates of total timber harvest and inventory by geographic region for periods of up to 50...

  14. Using TPO data to estimate timber demand in support of planning on the Tongass National Forest

    Science.gov (United States)

    Jean M. Daniels; Michael D. Paruszkiewicz; Susan J. Alexander

    2015-01-01

    Projections of Alaska timber products output, the derived demand for logs, lumber, residues, and niche products, and timber harvest by owner are developed by using a trend-based analysis. This is the fifth such analysis performed since 1990 to assist planners in meeting statutory requirements for estimating planning cycle demand for timber from the Tongass National...

  15. 36 CFR 294.24 - Timber cutting, sale, or removal in Idaho Roadless Areas.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Timber cutting, sale, or..., DEPARTMENT OF AGRICULTURE SPECIAL AREAS Idaho Roadless Area Management § 294.24 Timber cutting, sale, or removal in Idaho Roadless Areas. (a) Wild Land Recreation. The cutting, sale, or removal of timber is...

  16. Protection of mechanized timberings on beds dangerous for mine impacts

    Energy Technology Data Exchange (ETDEWEB)

    Budirsky, S

    1982-01-01

    In some stoping faces on beds which are dangerous for mine impacts, mechanized timbering is successfully used which is not equipped with protection from the effect of these dynamic phenomena. This generated the idea that in the indicated conditions, mechanized timbering may not be equipped with protective devices against dynamic loads. Theoretical studies have shown that the effects of mine impacts depends on the total energy of the impact, distance of this stoping face from the epicenter of the impact, as well as the capacity of the rock massif to transmit and absorb energy of the mine impact. This means that the effect of the mine impact under different conditions is not the same, the mine impacts of lower energy under definite conditions can result in greater damages to the mechanized timbering than mine impact with higher energy. It is believed that the effect of absorption of energy of the mine impact depends on the method of control of the roofing in the stoping face, the presence of hydraulic fill quarantees absorption of up to 80% of its energy. The experience of working beds which are dangerous for mine impacts in the upper Silesia coal basin indicated that the designs of the mechanized timbering, especially shield, in which the stands are not rigidly connected to the roof timber, during operation on beds with thickness 2.5-4 m withstand mine impacts with energy 10/sup 7/ J without significant disorders (mine impacts with this energy occur very frequently . For energy of mine impact of 108 J (impacts with this energy are observed comparatively rarely), the mechanized timberings are considerably damaged.

  17. Theory of timber connections with slender dowel type fasteners

    DEFF Research Database (Denmark)

    Svensson, Staffan; Munch-Andersen, Jørgen

    2018-01-01

    A theory on the lateral load-carrying capacity of timber connections with slender fasteners is presented. The base of the theory is the coupled mechanical phenomena acting in the connection, while the wood and the slender fastener deform and yield prior to failure. The objective is to derive...... a sufficient description of actions and responses which have determining influence on the load-carrying capacity of timber connections with slender fasteners. Model assumptions are discussed and made, but simplifications are left out. Even so, simple mathematical equations describing the lateral capacity......-carrying capacity of the tested connections....

  18. Global timber trade pattern: the cards have changed

    OpenAIRE

    Roda Jean-Marc; Rohana Abd Rahman; Ismariah Ahmad; Lim Hin Fui; Mohd Parid Mamat

    2011-01-01

    Since the 1960s, the global timber trade has gradually evolved from a South-North trade to a South-South trade, with an acceleration of the phenomenon in the mid 1990s. Nowadays, Asia consumes more than 70% (in round wood equivalent) of the forest products originating from the tropics. Africa becomes the new frontier for the supplies of wood material for Asian giants, which now source raw wood from all over the world. Since the mid 1990s, the dynamics of the tropical timber trade have been in...

  19. Fire resistance in American heavy timber construction history and preservation

    CERN Document Server

    Heitz, Jesse

    2016-01-01

    This volume presents a history of heavy timber construction (HTC) in the United States, chronicling nearly two centuries of building history, from inception to a detailed evaluation of one of the best surviving examples of the type, with an emphasis on fire resistance. The book does not limit itself in scope to serving only as a common history. Rather, it provides critical analysis of HTC in terms of construction methods, design, technical specifications, and historical performance under fire conditions. As such, this book provides readers with a truly comprehensive understanding and exploration of heavy timber construction in the United States and its performance under fire conditions.

  20. Analysis of the Strength of Timber and Glulam Timber Beams with Steel Reinforcement

    Directory of Open Access Journals (Sweden)

    Arie Putra Usman

    2015-12-01

    Full Text Available Indonesia is a tropical country with abundant tropical timber that can be used as a building material. Wood is a renewable material, thus making it an environmentally friendly construction material. However, the dimensional limitations of solid wood may pose problems in structural constructions. Wood material also has some disadvantages, such as brittle failure. However, the ductility of wood can be increased because of plasticity occurring in the compression zone. Wood material with good ductility can be obtained by reinforcing it in the tensile zone. This study is about the strength of wood material for use as a material for structural elements. Based on the analytical findings, the bending capacity of wood can be improved by adding reinforcements to the tensile zone.

  1. Mapping potential carbon and timber losses from hurricanes using a decision tree and ecosystem services driver model.

    Science.gov (United States)

    Delphin, S; Escobedo, F J; Abd-Elrahman, A; Cropper, W

    2013-11-15

    Information on the effect of direct drivers such as hurricanes on ecosystem services is relevant to landowners and policy makers due to predicted effects from climate change. We identified forest damage risk zones due to hurricanes and estimated the potential loss of 2 key ecosystem services: aboveground carbon storage and timber volume. Using land cover, plot-level forest inventory data, the Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST) model, and a decision tree-based framework; we determined potential damage to subtropical forests from hurricanes in the Lower Suwannee River (LS) and Pensacola Bay (PB) watersheds in Florida, US. We used biophysical factors identified in previous studies as being influential in forest damage in our decision tree and hurricane wind risk maps. Results show that 31% and 0.5% of the total aboveground carbon storage in the LS and PB, respectively was located in high forest damage risk (HR) zones. Overall 15% and 0.7% of the total timber net volume in the LS and PB, respectively, was in HR zones. This model can also be used for identifying timber salvage areas, developing ecosystem service provision and management scenarios, and assessing the effect of other drivers on ecosystem services and goods. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. ST-T isointegral analysis of exercise stress body surface mapping for identifying ischemic areas in patients with angina pectoris

    International Nuclear Information System (INIS)

    Nakajima, T.; Kawakubo, K.; Toda, I.; Mashima, S.; Ohtake, T.; Iio, M.; Sugimoto, T.

    1988-01-01

    ST-T isointegral analysis of body surface mapping was used in an attempt to localize ischemic areas on exercise tests. In 28 patients with angina pectoris and 10 healthy subjects, body surface potential was recorded with 87 leads, and ST isopotential and ST-T isointegral maps were constructed. In all 10 healthy subjects, the basic pattern of the ST-T isointegral map showed no significant change after exercise. In 23 of 28 patients with angina pectoris (82%), alterations in the ST-T isointegral map after exercise were observed. They were divided into four types (anterior, inferoposterior, lateral, and global) according to the distribution of negative values, which were well correlated with the extent of ischemic area determined by thallium myocardial scintigraphy and coronary angiography. The postexercise ST-T isointegral map was normalized after administration of nitroglycerin in four of five patients. In five patients (18%) who did not show abnormalities on the postexercise ST-T isointegral map, the magnitude of maximal ST depression was significantly smaller than that observed in the other 23 patients with angina pectoris (0.14 vs 0.23 mV on the average, p less than 0.05). It was concluded that the exercise test with ST-T isointegral mapping is a new method for noninvasive detection of location and severity of ischemic regions

  3. Computation and Evaluation of Features of Surface Electromyogram to Identify the Force of Muscle Contraction and Muscle Fatigue

    Directory of Open Access Journals (Sweden)

    Sridhar P. Arjunan

    2014-01-01

    Full Text Available The relationship between force of muscle contraction and muscle fatigue with six different features of surface electromyogram (sEMG was determined by conducting experiments on thirty-five volunteers. The participants performed isometric contractions at 50%, 75%, and 100% of their maximum voluntary contraction (MVC. Six features were considered in this study: normalised spectral index (NSM5, median frequency, root mean square, waveform length, normalised root mean square (NRMS, and increase in synchronization (IIS index. Analysis of variance (ANOVA and linear regression analysis were performed to determine the significance of the feature with respect to the three factors: muscle force, muscle fatigue, and subject. The results show that IIS index of sEMG had the highest correlation with muscle fatigue and the relationship was statistically significant (P0.05.

  4. Computation and evaluation of features of surface electromyogram to identify the force of muscle contraction and muscle fatigue.

    Science.gov (United States)

    Arjunan, Sridhar P; Kumar, Dinesh K; Naik, Ganesh

    2014-01-01

    The relationship between force of muscle contraction and muscle fatigue with six different features of surface electromyogram (sEMG) was determined by conducting experiments on thirty-five volunteers. The participants performed isometric contractions at 50%, 75%, and 100% of their maximum voluntary contraction (MVC). Six features were considered in this study: normalised spectral index (NSM5), median frequency, root mean square, waveform length, normalised root mean square (NRMS), and increase in synchronization (IIS) index. Analysis of variance (ANOVA) and linear regression analysis were performed to determine the significance of the feature with respect to the three factors: muscle force, muscle fatigue, and subject. The results show that IIS index of sEMG had the highest correlation with muscle fatigue and the relationship was statistically significant (P 0.05).

  5. In vitro propagation of an endangered medicinal timber species ...

    African Journals Online (AJOL)

    The over exploitation of African mahogany in tropical forest has threatened the genetic base of this useful timber and medicinal tree species and as such, an experiment was conducted on the in vitro culture of Khaya grandifoliola, an endangered tree species commonly found in the high forest zones of West Africa to explore ...

  6. 75 FR 63419 - Surety Bond Guarantee Program; Timber Sales

    Science.gov (United States)

    2010-10-15

    ... with the contract terms. 36 CFR 223.35. Generally, the Performance Bond, as defined in 13 CFR 115.10, ensures that the Principal, as defined in 13 CFR 115.10, complies with all contract terms and conditions... timber sale contracts awarded by the Federal Government or other public or private landowners. DATES...

  7. Montana's forest products industry and timber harvest, 2004

    Science.gov (United States)

    Timothy P. Spoelma; Todd A. Morgan; Thale Dillon; Alfred L. Chase; Charles E. Keegan; Larry T. DeBlander

    2008-01-01

    This report traces the flow of Montana's 2004 timber harvest through the primary wood-using industries; provides a description of the structure, capacity, and condition of Montana's primary forest products industry; and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as changes in harvest, production...

  8. Projecting southern timber supply for multiple products by subregion

    Science.gov (United States)

    Robert C. Abt; Frederick W. Cubbage; Karen L. Abt

    2009-01-01

    While timber supply modeling has been of importance in the wood-producing regions of the United States for decades, it is only more recently that the technology and data have allowed disaggregation of supply and demand to substate regions, including product specific breakdowns and endogenous land use and plantation changes. Using southwide data and an economic supply...

  9. An Ethnobotanical Survey on Fuel Wood and Timber plant Species ...

    African Journals Online (AJOL)

    Yomi

    2011-12-19

    Dec 19, 2011 ... 3Department of Botany, Post Graduate College Abbottabad, Pakistan. Accepted 17 March, 2011. A survey was conducted to explore the fuel wood species and timber producing species of Kaghan valleys, Pakistan. Consumption pattern and impact on the forest resources were also taken into consideration.

  10. Essays on the economics of British Columbian timber policy

    NARCIS (Netherlands)

    Niquidet, Kurt

    2007-01-01

    This thesis examines the process of institutional change in British Columbia’s timber sector. It is composed of a series of essays which highlight the underlying political and economic factors that have shaped past and current reforms. Taking center stage in the analysis, are the resource rents

  11. Forest ecosystem services: Provisioning of non-timber forest products

    Science.gov (United States)

    James L. Chamberlain; Gregory E. Frey; C. Denise Ingram; Michael G. Jacobson; Cara Meghan Starbuck Downes

    2017-01-01

    The purpose of this chapter is to describe approaches to calculate a conservative and defensible estimate of the marginal value of forests for non-timber forest products (NTFPs). 'Provisioning" is one of four categories of benefits, or services that ecosystems provide to humans and was described by the Millennium Ecosystem Assessment as 'products...

  12. Pennsylvania hardwood timber bridges : field performance after 10 years

    Science.gov (United States)

    James P. Wacker; Carlito Calil

    2004-01-01

    Several hardwood demonstration timber bridges were built by the Pennsylvania Department of Transportation in the early nineteen nineties. These bridge superstructures are of the recently developed stress-laminated deck design-type using Red Oak lumber laminations that were pressure-treated with creosote preservatives. This paper will describe the data acquisition...

  13. The Effect of Urban Sprawls on Timber Harvesting

    Science.gov (United States)

    Stephen A. Barlow; Ian A Munn; David A. Cleaves; David L. Evans

    1998-01-01

    In Mississippi and Alabama, urban population growth is pushing development into rural areas. To study the impact of urbanization on timber harvesting, census and forest inventory data were combined in a geographic information system, and a logistic regression model was used to estimate the relationship between several variables and harvest probabilities....

  14. Timber resource of Michigan's Southern Lower Peninsula Unit, 1980.

    Science.gov (United States)

    Jerold T. Hahn

    1982-01-01

    The fourth inventory of the timber resource of Michigan's Southern Lower Peninsula Survey Unit shows a 12% decline in commercial forest area and a 26% gain in growing-stock volume between 1966 and 1980. Presented are highlights and statistics on area, volume, growth, mortality, removals, utilization, and biomass.

  15. Chapter 4: Lateral design of cross-laminated timber buildings

    Science.gov (United States)

    John W. van de Lindt; Douglas Rammer; Marjan Popovski; Phil Line; Shiling Pei; Steven E. Pryor

    2013-01-01

    Cross-laminated timber (CLT) is an innovative wood product that was developed approximately two decades ago in Europe and has since been gaining in popularity. Based on the experience of European researchers and designers, it is believed that CLT can provide the U.S. market the opportunity to build mid- and high-rise wood buildings. This Chapter presents a summary of...

  16. Finite element analysis of composite concrete-timber beams

    Directory of Open Access Journals (Sweden)

    N. C. S. FORTI

    Full Text Available AbstractIn the search for sustainable construction, timber construction is gaining in popularity around the world. Sustainably harvested wood stores carbon dioxide, while reforestation absorbs yet more CO2. One technique involves the combination of a concrete slab and a timber beam, where the two materials are assembled by the use of flexible connectors. Composite structures provide reduced costs, environmental benefits, a better acoustic performance, when compared to timber structures, and maintain structural safety. Composite structures combine materials with different mechanical properties. Their mechanical performance depends on the efficiency of the connection, which is designed to transmit shear longitudinal forces between the two materials and to prevent vertical detachment. This study contributes with the implementation of a finite element formulation for stress and displacement determination of composite concrete-timber beams. The deduced stiffness matrix and load vector are presented along to numerical examples. Numerical examples are compared to the analytical equations available in Eurocode 5 and to experimental data found in the literature.

  17. Emissions from prescribed burning of timber slash piles in Oregon.

    Science.gov (United States)

    Emissions from burning piles of post-harvest timber slash (Douglas fir) in Grande Ronde, Oregon were sampled using an instrument platform lofted into the plume using a tether-controlled aerostat or balloon. Emissions of carbon monoxide, carbon dioxide, methane, particulate matte...

  18. Timber resource of Wisconsin's Northwest Survey Unit, 1983.

    Science.gov (United States)

    W. Brad Smith

    1984-01-01

    The fourth inventory of the timber resource of the Northwest Wisconsin Survey Unit shows a 1.8% decline in commercial forest area and a 36% gain in growing-stock volume between 1968 and 1983. Presented are highlights and statistics on area, volume, growth, mortality, removals, utilization, and biomass.

  19. Smart timber bridge on geosynthetic reinforced soil (GRS) abutments

    Science.gov (United States)

    Adam Senalik; James P. Wacker; Travis K. Hosteng; John Hermanson

    2017-01-01

    Recently, Buchanan County, Iowa, has cooperated with the U.S. Federal Highway Administration (FHWA), USDA Forest Service, Forest Products Laboratory (FPL), and Iowa State University’s Bridge Engineering Center (ISU–BEC) to initiate a project involving the construction and monitoring of a glued-laminated (glulam) timber superstructure on geosynthetic reinforced soil (...

  20. The privately owned timber resources of western Oregon.

    Science.gov (United States)

    Donald R. Gedney

    1983-01-01

    Timber resource statistics from a 1973-76 inventory are presented for private timberland in western Oregon. Inventories usually classify private owners as either forest industry or nonindustrial private. For this report, however, the nonindustrial private classification has been further disaggregated into farmer, individual, and corporate owners. For all private owner...

  1. TRIM timber projections: an evaluation based on forest inventory measurements.

    Science.gov (United States)

    John R. Mills

    1989-01-01

    Two consecutive timberland inventories collected from permanent plots in the natural pine type in North Carolina were used to evaluate the timber resource inventory model (TRIM). This study compares model predictions with field measurements and examines the effect of inventory data aggregation on the accuracy of projections. Projections were repeated for two geographic...

  2. Non-timber forest products in sustainable forest management

    Science.gov (United States)

    James L. Chamberlain; A.L. Hammett; Philip A. Araman

    2001-01-01

    The forests of Southern United States are the source of many non-timber forest products (NTFPs). The collection, trade and use of these products have been important to rural economies since Europeans settled in this country. At the same time the plants from which these products originate are crucial to healthy ecosystems. Over the last decade, the market demand and the...

  3. 36 CFR 223.85 - Noncompetitive sale of timber.

    Science.gov (United States)

    2010-07-01

    ... further advertisement, at not less than appraised value, any timber previously advertised for competitive... degradation or resource damage, or as the result of administrative appeals, litigation, or court orders... any applicable appeals or objection process has been completed may be considered for replacement...

  4. Modeling ground-based timber harvesting systems using computer simulation

    Science.gov (United States)

    Jingxin Wang; Chris B. LeDoux

    2001-01-01

    Modeling ground-based timber harvesting systems with an object-oriented methodology was investigated. Object-oriented modeling and design promote a better understanding of requirements, cleaner designs, and better maintainability of the harvesting simulation system. The model developed simulates chainsaw felling, drive-to-tree feller-buncher, swing-to-tree single-grip...

  5. Global timber investments, wood costs, regulation, and risk

    Science.gov (United States)

    F. Cubbage; S. Koesbandana; P Mac Donagh; R. Rubilar; G Balmelli; V. Morales Olmos; R. De La Torre; M. Murara; V.A. Hoeflich; H. Kotze; R Gonzalez; O. Carrero; G. Frey; T. Adams; J. Turner; R. Lord; J. Huang; C. MacIntyre; Kathleen McGinley; R. Abt; R. Phillips

    2010-01-01

    We estimated financial returns and wood production costs in 2008 for the primary timber plantation species. Excluding land costs, returns for exotic plantations in almost all of South America e Brazil, Argentina, Uruguay, Chile, Colombia, Venezuela, and Paraguay e were substantial. Eucalyptus species returns were generally greater than those for Pinus species in each...

  6. an assessment of timber trees producing valuable fruits and seeds ...

    African Journals Online (AJOL)

    User

    It is observed that most of the timber trees producing valuable fruits and seeds have low ... sector of the economy by providing major raw materials (saw logs, ... the trees also produce industrial raw materials like latex, ... villagers while avoiding some of the ecological costs of ..... enzymes of rats with carbon tetrachloride.

  7. Marketing of Non-Timber Forest Products in Kajola Local ...

    African Journals Online (AJOL)

    Marketing of Non-Timber Forest Products in Kajola Local Government Area of Oyo State, Nigeria. ... International Journal of Tropical Agriculture and Food Systems ... The results of the marketing margin reveal that charcoal commanded the highest margin of ₦2500, followed by bush meat (₦300), while wrapping had the ...

  8. probabilistic evaluation of eur robabilistic evaluation of eur a timber

    African Journals Online (AJOL)

    eobe

    than steel or concrete [13]. Fire is an emotive sub ... Kaura1, I. Abubakar2, U. Hassan3 and I. Aliyu4 ... portal frame in fire is the failure of the rafter-column connection that re column ...... Thin-webbed Timber Beams”, Asian Journal of Civil.

  9. Self-extinguishment of cross-laminated timber

    NARCIS (Netherlands)

    Crielaard, R.; van de Kuilen, J.W.G.; Terwel, K.C.; Ravenshorst, G.J.P.; Steenbakkers, P.; Breunesse, A.

    2016-01-01

    Cross-laminated timber, or CLT, is receiving attention for its potential use in tall buildings. As a combustible material, one of the challenges for the construction of these buildings is the fire risk that results from its use in the structure. Unprotected CLT can burn along with the fuel load

  10. Supply and demand of timber for wood turning in Maine

    Science.gov (United States)

    Eric H. Wharton; Robert L., Jr. Nevel; Douglas S. Powell; Douglas S. Powell

    1987-01-01

    An analytical report on the volume of wood used by the wood-turning industry in Maine, and the volume of timber from the state's timberlands that may be suitable for turnstock. Findings are based on the third forest resource survey of Maine timberlands, and an industry canvass of primary manufacturing mills using wood from Maine timberlands, both conducted in 1982...

  11. 36 CFR 223.187 - Determinations of unprocessed timber.

    Science.gov (United States)

    2010-07-01

    ... generally recognized by the industry as setting a selling standard; and, (ii) A statement by the... setting a selling standard. (3) Lumber, construction timbers, or cants for remanufacture, except western... or better, with a maximum cross section of 2,000 square centimeters (310 square inches) for any...

  12. Chapter 5: Connections Connections in cross-laminated timber buildings

    Science.gov (United States)

    Mohammad Mohammad; Bradford Douglas; Douglas Rammer; Steven E. Pryor

    2013-01-01

    The light weight of cross-laminated timber (CLT) products combined with the high level of prefabrication involved, in addition to the need to provide wood-based alternative products and systems to steel land concrete, have significantly contributed to the development of CLT products and systems, especially in mid-rise buildings (5 to 9 stories). While this product is...

  13. Chapter 1: CLT Introduction to cross-laminated timber

    Science.gov (United States)

    Sylvan Gagnon; E.M.(Ted) Bilek; Lisa Podesto; Pablo Crespell

    2013-01-01

    Cross-laminated timber ( CLT), a new generation of engineered wood product developed initially in Europe, has been gaining increased popularity in residential and non-residential applications in several countries. Many impressive low- and mid-rise buildings built around the world using CLT showcase the many advantages this product has to offer to the construction...

  14. Timber beams loaded perpendicular to grain by multiple connections

    NARCIS (Netherlands)

    Leijten, A.J.M.; Schoenmakers, J.C.M.

    2014-01-01

    In timber structures, beams which are loaded perpendicular to grain by connections along the span may fail by splitting, resulting in the collapse of the beam. In the past, empirical, semi-empirical and fracture mechanical models have been developed aiming at predicting the splitting failure load.

  15. Determining modulus of elasticity of ancient structural timber

    Science.gov (United States)

    Houjiang Zhang; Lei Zhu; Yanliang Sun; Xiping Wang; Haicheng Yan

    2011-01-01

    During maintenance of ancient timber architectures, it is important to determine mechanical properties of the wood component materials non-destructively and effectively, so that degraded members may be replaced or repaired to avoid structural failure. Experimental materials are four larch (Larix principis-rupprechtii Mayr.) components, which were taken down from the...

  16. Timber market research, private forests, and policy rhetoric

    Science.gov (United States)

    David N. Wear; Jeffrey P. Prestemon

    2004-01-01

    The development of the profession and practice of forestry in the United States can be linked to urgent concerns regarding timber shortages in the late 19th century (Williams 1989). These were based largely on perceived failures of forest landowners to protect or invest enough in the productive capacity of their forests (Manthy 1977). The South, as the only major...

  17. Forest soil biology-timber harvesting relationships: a perspective

    Science.gov (United States)

    M. F. Jurgensen; M. J. Larsen; A. E. Harvey

    1979-01-01

    Timber harvesting has a pronounced effect on the soil microflora by wood removal and changing properties. This paper gives a perspective on soil biology-harvesting relationships with emphasis on the northern Rocky Mountain region. Of special significance to forest management operations are the effects of soil micro-organisms on: the availability of soil nutrients,...

  18. Idaho's forest products industry and timber harvest, 2011

    Science.gov (United States)

    Eric A. Simmons; Steven W. Hayes; Todd A. Morgan; Charles E. Keegan; Chris Witt

    2014-01-01

    This report traces the flow of Idaho’s 2011 timber harvest through the primary industries; provides a description of the structure, capacity, and condition of Idaho’s industry; and quantifies volumes and uses of wood fiber. Historical wood products industry trends are discussed, as well as changes in harvest, production, employment, and sales.

  19. Effects of timber harvest following wildfire in western North America

    Science.gov (United States)

    David L. Peterson; James K. Agee; Gregory H. Aplet; Dennis P. Dykstra; Russell T. Graham; John F. Lehmkuhl; David S. Pilliod; Donald F. Potts; Robert F. Powers; John D. Stuart

    2009-01-01

    Timber harvest following wildfire leads to different outcomes depending on the biophysical setting of the forest, pattern of burn severity, operational aspects of tree removal, and other management activities. Fire effects range from relatively minor, in which fire burns through the understory and may kill a few trees, to severe, in which fire kills most trees and...

  20. A Computer Program to Evaluate Timber Production Investments Under Uncertainty

    Science.gov (United States)

    Dennis L. Schweitzer

    1968-01-01

    A computer program has been written in Fortran IV to calculate probability distributions of present worths of investments in timber production. Inputs can include both point and probabilistic estimates of future costs, prices, and yields. Distributions of rates of return can also be constructed.

  1. Strength and stiffness capacity utilisation of timber members in roof ...

    African Journals Online (AJOL)

    C Brand Wessels, Nils-Olaf Petersen. Abstract. The main objective of this study was to determine which property, of the six strength and stiffness properties used in structural timber design, was the most influential in the design of nail-plated roof trusses. Thirty recently completed nail-plated roof truss designs were randomly ...

  2. The Four Corners timber harvest and forest products industry, 2012

    Science.gov (United States)

    Colin B. Sorenson; Steven W. Hayes; Todd A. Morgan; Eric A. Simmons; Micah G. Scudder; Chelsea P. McIver; Mike T. Thompson

    2016-01-01

    This report traces the flow of timber harvested in the "Four Corners" States (Arizona, Colorado, New Mexico, and Utah) during calendar year 2012, describes the composition and operations of the region’s primary forest products industry, and quantifies volumes and uses of wood fiber. Recent changes in the wood products industry are discussed, as well as trends...

  3. The Four Corners timber harvest and forest products industry, 2007

    Science.gov (United States)

    Steven W. Hayes; Todd A. Morgan; Erik C. Berg; Jean M. Daniels; Mike Thompson

    2012-01-01

    This report traces the flow of timber harvested in the "Four Corners" States (Arizona, Colorado, New Mexico, and Utah) during calendar year 2007, describes the composition and operations of the region's primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as...

  4. Gender analysis of non-timber forest products (NTFPs) collection ...

    African Journals Online (AJOL)

    Millions of people, especially those living in rural areas in developing countries collect Non-Timber Forest products (NTFPs) daily. Women are known to play a prominent role in forestry and agricultural production in Nigeria despite not been captured as economically productive. This work looked into gender dimension ...

  5. 25 CFR 163.23 - Advance payment for timber products.

    Science.gov (United States)

    2010-04-01

    ... contracts. However, no advance payment will be required that would make the sum of such payment and of... required, advance payments will operate the same as provided for in § 163.23(a) of this part. ... 25 Indians 1 2010-04-01 2010-04-01 false Advance payment for timber products. 163.23 Section 163...

  6. Contribution of timber exports to economic growth in Nigeria: an ...

    African Journals Online (AJOL)

    The paper examined the contribution of timber exports to the economic growth in Nigeria, using an econometric approach. Augmented Dickey-Fuller (ADF) and Johansen Co-integration techniques were respectively used to test for unit root and examine the relationship between the variables used. In addition, Granger ...

  7. ECOLOGICAL EFFECT OF TIMBER EXPRACTION IN OHIMINI LGA ...

    African Journals Online (AJOL)

    Shima

    as Indonesia, Thailand, Malaysia, ... reduced biodiversity (Wikipedia, 2007). In many countries massive timber extraction is ongoing and is shaping climate and geography. logging affects the amount of water in the soil and groundwater and the moisture in the atmosphere. Forests support considerable biodiversity, providing.

  8. How to establish, maintain and use timber depletion accounts

    Science.gov (United States)

    William C. Siegel

    2001-01-01

    Section 1221 of the Internal Revenue Code defines capital expenditures. In general, these are amounts spent to acquire real estate or equipment, or to make improvements that increase the value of real estate or equipment already owned. Forestry examples include land, buildings, standing timber, reforestation costs, and tractors and trucks. Property owners who incur...

  9. Timber resource statistics for the Sacramento resource area of California.

    Science.gov (United States)

    Karen L. Waddell; Patricia M. Bassett

    1997-01-01

    This report is a summary of timber resource statistics for the Sacramento Resource Area of California, which includes Butte, Colusa, El Dorado, Glenn, Lake, Napa, Nevada, Placer, Plumas, Sacramento, Sierra, Sutter, Tehama, Yolo, and Yuba Counties. Data were collected as part of a statewide multiresource inventory. The inventory sampled private and public lands except...

  10. Timber resource statistics for Washington, January 1, 1973.

    Science.gov (United States)

    Patricia M. Bassett; Grover A. Choate

    1974-01-01

    Timber resource statistics to January 1, 1973, for the State of Washington show total land area, commercial timberland area, and growing stock and sawtimber inventory volumes by county and owner group. Growth and removals are shown by Forest Survey inventory unit for 1972. Each National Forest is updated to January 1, 1973.

  11. Timber resource statistics for Oregon, January 1, 1973.

    Science.gov (United States)

    Patricia M. Bassett; Grover A. Choate

    1974-01-01

    Timber resource statistics as of January 1, 1973, for the State of Oregon show total land area, commercial timberland area, and growing stock and sawtimber inventory volumes by county and owner group. Growth and removals are shown by Forest Survey inventory unit for 1972. Each National Forest is updated to January 1, 1973, as well as each Bureau of Land Management...

  12. Harvest choice and timber supply models for forest forecasting

    Science.gov (United States)

    Maksym Polyakov; David N Wear

    2010-01-01

    Timber supply has traditionally been modeled using aggregate data, whereas individual harvest choices have been shown to be sensitive to the vintage and condition of forest capital stocks. In this article, we build aggregate supply models for four roundwood products in a seven-state region of the US South directly from stand-level harvest choice models applied to...

  13. Building aggregate timber supply models from individual harvest choice

    Science.gov (United States)

    Maksym Polyakov; David N. Wear; Robert Huggett

    2009-01-01

    Timber supply has traditionally been modelled using aggregate data. In this paper, we build aggregate supply models for four roundwood products for the US state of North Carolina from a stand-level harvest choice model applied to detailed forest inventory. The simulated elasticities of pulpwood supply are much lower than reported by previous studies. Cross price...

  14. Forest management planning for timber production: a sequential approach

    Science.gov (United States)

    Krishna P. Rustagi

    1978-01-01

    Explicit forest management planning for timber production beyond the first few years at any time necessitates use of information which can best be described as suspect. The two-step approach outlined here concentrates on the planning strategy over the next few years without losing sight of the long-run productivity. Frequent updating of the long-range and short-range...

  15. An Ethnobotanical Survey on Fuel Wood and Timber plant Species ...

    African Journals Online (AJOL)

    A survey was conducted to explore the fuel wood species and timber producing species of Kaghan valleys, Pakistan. Consumption pattern and impact on the forest resources were also taken into consideration. A questionnaire was used as a survey instrument to obtain desired data. For this study, 10 villages were randomly ...

  16. Crystal structure of the gamma-2 herpesvirus LANA DNA binding domain identifies charged surface residues which impact viral latency.

    Directory of Open Access Journals (Sweden)

    Bruno Correia

    Full Text Available Latency-associated nuclear antigen (LANA mediates γ2-herpesvirus genome persistence and regulates transcription. We describe the crystal structure of the murine gammaherpesvirus-68 LANA C-terminal domain at 2.2 Å resolution. The structure reveals an alpha-beta fold that assembles as a dimer, reminiscent of Epstein-Barr virus EBNA1. A predicted DNA binding surface is present and opposite this interface is a positive electrostatic patch. Targeted DNA recognition substitutions eliminated DNA binding, while certain charged patch mutations reduced bromodomain protein, BRD4, binding. Virus containing LANA abolished for DNA binding was incapable of viable latent infection in mice. Virus with mutations at the charged patch periphery exhibited substantial deficiency in expansion of latent infection, while central region substitutions had little effect. This deficiency was independent of BRD4. These results elucidate the LANA DNA binding domain structure and reveal a unique charged region that exerts a critical role in viral latent infection, likely acting through a host cell protein(s.

  17. Documenting biogeographical patterns of African timber species using herbarium records: a conservation perspective based on native trees from Angola.

    Directory of Open Access Journals (Sweden)

    Maria M Romeiras

    Full Text Available In many tropical regions the development of informed conservation strategies is hindered by a dearth of biodiversity information. Biological collections can help to overcome this problem, by providing baseline information to guide research and conservation efforts. This study focuses on the timber trees of Angola, combining herbarium (2670 records and bibliographic data to identify the main timber species, document biogeographic patterns and identify conservation priorities. The study recognized 18 key species, most of which are threatened or near-threatened globally, or lack formal conservation assessments. Biogeographical analysis reveals three groups of species associated with the enclave of Cabinda and northwest Angola, which occur primarily in Guineo-Congolian rainforests, and evergreen forests and woodlands. The fourth group is widespread across the country, and is mostly associated with dry forests. There is little correspondence between the spatial pattern of species groups and the ecoregions adopted by WWF, suggesting that these may not provide an adequate basis for conservation planning for Angolan timber trees. Eight of the species evaluated should be given high conservation priority since they are of global conservation concern, they have very restricted distributions in Angola, their historical collection localities are largely outside protected areas and they may be under increasing logging pressure. High conservation priority was also attributed to another three species that have a large proportion of their global range concentrated in Angola and that occur in dry forests where deforestation rates are high. Our results suggest that timber tree species in Angola may be under increasing risk, thus calling for efforts to promote their conservation and sustainable exploitation. The study also highlights the importance of studying historic herbarium collections in poorly explored regions of the tropics, though new field surveys remain

  18. Documenting biogeographical patterns of African timber species using herbarium records: a conservation perspective based on native trees from Angola.

    Science.gov (United States)

    Romeiras, Maria M; Figueira, Rui; Duarte, Maria Cristina; Beja, Pedro; Darbyshire, Iain

    2014-01-01

    In many tropical regions the development of informed conservation strategies is hindered by a dearth of biodiversity information. Biological collections can help to overcome this problem, by providing baseline information to guide research and conservation efforts. This study focuses on the timber trees of Angola, combining herbarium (2670 records) and bibliographic data to identify the main timber species, document biogeographic patterns and identify conservation priorities. The study recognized 18 key species, most of which are threatened or near-threatened globally, or lack formal conservation assessments. Biogeographical analysis reveals three groups of species associated with the enclave of Cabinda and northwest Angola, which occur primarily in Guineo-Congolian rainforests, and evergreen forests and woodlands. The fourth group is widespread across the country, and is mostly associated with dry forests. There is little correspondence between the spatial pattern of species groups and the ecoregions adopted by WWF, suggesting that these may not provide an adequate basis for conservation planning for Angolan timber trees. Eight of the species evaluated should be given high conservation priority since they are of global conservation concern, they have very restricted distributions in Angola, their historical collection localities are largely outside protected areas and they may be under increasing logging pressure. High conservation priority was also attributed to another three species that have a large proportion of their global range concentrated in Angola and that occur in dry forests where deforestation rates are high. Our results suggest that timber tree species in Angola may be under increasing risk, thus calling for efforts to promote their conservation and sustainable exploitation. The study also highlights the importance of studying historic herbarium collections in poorly explored regions of the tropics, though new field surveys remain a priority to

  19. Total Weight and Axle Loads of Truck Units in the Transport of Timber Depending on the Timber Cargo

    Directory of Open Access Journals (Sweden)

    Grzegorz Trzciński

    2018-03-01

    Full Text Available When transporting timber, the high variability of species, assortments and moisture content of the wood raw material does not allow the weight of the transported timber to be precisely determined. This often contributes to the excessive weight loading of the entire truck unit. The aim of the research is to present the variability of the total weight of truck units with wood cargoes (GVW—gross vehicle weight depending on the weight of the empty unit and the transported timber load, as well as to analyze the changes in GVW, unit loads of wood and load on individual truck unit axles depending on the season. This study analyzes the total weight of truck units for 376 transports of Scots pine timber at different times of the year. The total weight of the truck units depends on the weight of an empty unit and the weight of the load. GVW was determined by using a weighbridge to weigh the vehicles and then the empty unit after unloading. The weight of the load was obtained as the difference between GVW and the tare. It was found that GVW differed significantly depending on the truck unit used, ranging from 43.60–58.80 Mg, often exceeding permissible limits for public roads. The individual axle loads for various truck units were also analyzed. The obtained results indicate that these loads are more equally distributed in the case of five-axle trucks compared to six-axle ones.

  20. Historic timber skeleton structures and the local seismic culture

    Science.gov (United States)

    Bostenaru, M.

    2009-04-01

    This presentation deals with the employment of timber skeleton structure and the local seismic culture. After the 1755 earthquake in the reconstruction of Lisbon a type of building with timber skeleton and masonry infill called "gaiola pombalina" was promoted, since this was designed to better resists earthquakes. "Gaiola" means cage, and it was also named after the Marques de Pombal who introduced it in the reconstruction following the earthquake. The „gaiola pombalina" presents a timber skeleton with Saint Andrew crosses in the interior walls with masonry infill and thick masonry load bearing walls loosing in thickness to the upper floors in the exterior walls. The masonry can fall out during earthquakes but the building remains staying given the interior timber skeleton. The type of buildings with timber structure and (masonry) infill behaved well in earthquakes in various parts of the earth, like Nepal (the dhaji dewary type), Pakistan, Turkey (the himiş type after the 1999 earthquake) [both latter types were researched by Langenbach, www.conservationtech.com and www.traditional-is-modern.net] and also in Germany after the 1356 earthquake (the Southern German subtype of Fachwerk). Also in Italy a subtype called "casa baraccata" was promoted in a construction code to a similar time (following the 1783 earthquake in Southern Italy, see Tobriner 1983) as that of the "gaiola pombalina", the time of the Baroque, when town planning acquired another status. Unlike at the "gaiola pombalina" the "casa baraccata" the timber skeleton is at the exterior walls. For this reason this type of buildings is considered to be an expression of the local seismic culture. However, this type of buildings is common also for areas where seismic risk is not an issue, like half-timbered in England and the northern subtype of Fachwerk in Northern Germany, and in some high seismic risk regions with mountains and timber resources like Romania is not spread. Given these premises the author

  1. Discussion about the use of the volume-specific surface area (VSSA) as criteria to identify nanomaterials according to the EU definition

    International Nuclear Information System (INIS)

    Lecloux, André J.

    2015-01-01

    In the EU regulation, a material containing particles is considered as nano if, for 50 % or more of the particles in the number size distribution, one or more external dimensions is in the size range 1–100 nm. Due to the difficulty to measure in a reliable way the number particle size distribution, it is suggested to use the volume-specific surface area (VSSA) >60 m 2 /cm 3 as simple screening criterion to identify nanomaterials. This threshold corresponds to monodispersed spherical particles with a size of 100 nm. In this paper, a theoretical study is carried out to identify the effect of the particle shape, polydispersity, agglomeration and aggregation on the VSSA threshold. It appears that the VSSA approach is overprotective because a lot of samples are identified as nanomaterials even if less than 50 % of the particles have a size lower than 100 nm, this 50 % in number criterion being the main identification criterion in the EU definition. Even if the VSSA is leading to many false positive results, it can be used to identify non-nanomaterials as soon as its value is lower than the threshold at the condition to take into account the shape of the particles and their external surface area. This conclusion is true for monomodal distributions of particles but is subject to some restrictions for bimodal distributions

  2. Discussion about the use of the volume-specific surface area (VSSA) as criteria to identify nanomaterials according to the EU definition

    Energy Technology Data Exchange (ETDEWEB)

    Lecloux, André J., E-mail: alecloux@nanocyl.com, E-mail: envicat@skynet.be [ENVICAT Consulting (Belgium)

    2015-11-15

    In the EU regulation, a material containing particles is considered as nano if, for 50 % or more of the particles in the number size distribution, one or more external dimensions is in the size range 1–100 nm. Due to the difficulty to measure in a reliable way the number particle size distribution, it is suggested to use the volume-specific surface area (VSSA) >60 m{sup 2}/cm{sup 3} as simple screening criterion to identify nanomaterials. This threshold corresponds to monodispersed spherical particles with a size of 100 nm. In this paper, a theoretical study is carried out to identify the effect of the particle shape, polydispersity, agglomeration and aggregation on the VSSA threshold. It appears that the VSSA approach is overprotective because a lot of samples are identified as nanomaterials even if less than 50 % of the particles have a size lower than 100 nm, this 50 % in number criterion being the main identification criterion in the EU definition. Even if the VSSA is leading to many false positive results, it can be used to identify non-nanomaterials as soon as its value is lower than the threshold at the condition to take into account the shape of the particles and their external surface area. This conclusion is true for monomodal distributions of particles but is subject to some restrictions for bimodal distributions.

  3. Strontium isotopes reveal distant sources of architectural timber in Chaco Canyon, New Mexico.

    Science.gov (United States)

    English, N B; Betancourt, J L; Dean, J S; Quade, J

    2001-10-09

    Between A.D. 900 and 1150, more than 200,000 conifer trees were used to build the prehistoric great houses of Chaco Canyon, New Mexico, in what is now a treeless landscape. More than one-fifth of these timbers were spruce (Picea) or fir (Abies) that were hand-carried from isolated mountaintops 75-100 km away. Because strontium from local dust, water, and underlying bedrock is incorporated by trees, specific logging sites can be identified by comparing (87)Sr/(86)Sr ratios in construction beams from different ruins and building periods to ratios in living trees from the surrounding mountains. (87)Sr/(86)Sr ratios show that the beams came from both the Chuska and San Mateo (Mount Taylor) mountains, but not from the San Pedro Mountains, which are equally close. Incorporation of logs from two sources in the same room, great house, and year suggest stockpiling and intercommunity collaboration at Chaco Canyon. The use of trees from both the Chuska and San Mateo mountains, but not from the San Pedro Mountains, as early as A.D. 974 suggests that selection of timber sources was driven more by regional socioeconomic ties than by a simple model of resource depletion with distance and time.

  4. The effect of fissures on the strength of structural timber

    Directory of Open Access Journals (Sweden)

    Íñiguez, Guillermo

    2010-06-01

    Full Text Available Detailed measurements of drying fissures were carried out on 28 pieces of gross cross-section structural Scots pine timber. Different parameters have been proposed to measure their magnitude: length, depth, thickness and slope of grain, as well as an index of area in the neutral axis plane (ratio of effective to total surface. The parameters of fissures have been related to bending strength, shear strength, modulus of elasticity and rupture energy obtained from mechanical tests, considering whether rupture is due to bending or shear. All of the fissures observed allows to classify the pieces as MEG according to the UNE 56544 standard. To quantify the magnitude of fissures the index of areas is proposed, while mechanical properties can be quantified by rupture energy. Analysis of the results does not show any relation between the fissures analyzed and the mode of failure, their magnitude and mechanical properties..

    Se han realizado mediciones detalladas de las fendas de secado en 28 piezas de madera de pino silvestre de gran escuadría. Se han propuesto diferentes parámetros para medir su magnitud en longitud, profundidad, grosor e inclinación, así como un índice de áreas en el plano medio de rasante (superficie eficaz respecto a superficie total. Se han relacionado los parámetros de fendas con resistencia a flexión, resistencia a cortante, módulo de elasticidad y energía de rotura obtenidos mediante ensayos mecánicos, teniendo en cuenta si la rotura se produce por flexión o por cortante. Todas las fendas observadas permiten clasificar las piezas como MEG según la norma UNE 56544. Se propone cuantificar las fendas mediante el índice de áreas y las propiedades mecánicas mediante la energía de rotura. El análisis realizado no muestra una relación significativa entre las fendas analizadas, los modos de rotura o las propiedades mecánicas.

  5. Local timber firm looking forward to develop on medium term

    Directory of Open Access Journals (Sweden)

    BUCS Lorant

    2017-01-01

    Full Text Available This article intends to outline the challenges faced by a local timber company in struggle to resist on medium-term on the market. There will be revealed the challenges the company is facing, and also the ways to adapt to the changing world of timber industry. There will be presented a short history of the founding and the evolution of the company on the local and international market, pointing out the relevant events which have marked the life of the company during the years. There will also be presented a short review of the competition on the market and the marketing strategy and policies which the company is using to be able to face the new challenges.

  6. Performance of Sprayed Fiber Reinforced Polymer Strengthened Timber Beams

    Directory of Open Access Journals (Sweden)

    S. Talukdar

    2010-01-01

    Full Text Available A study was carried out to investigate the use of Sprayed Fiber Reinforced Polymer (SFRP for retrofit of timber beams. A total of 10-full scale specimens were tested. Two different timber preservatives and two different bonding agents were investigated. Strengthening was characterized using load deflection diagrams. Results indicate that it is possible to enhance load-carrying capacity and energy absorption characteristics using the technique of SFRP. Of the two types of preservatives investigated, the technique appears to be more effective for the case of creosote-treated specimens, where up to a 51% improvement in load-carrying capacity and a 460% increase in the energy absorption capacity were noted. Effectiveness of the bonding agent used was dependent on the type of preservative the specimen had been treated with.

  7. Seismic Strengthening of Carpentry Joints in Traditional Timber Structures

    International Nuclear Information System (INIS)

    Parisi, Maria A.; Cordie, Cinzia; Piazza, Maurizio

    2008-01-01

    The static and dynamic behavior of timber structures largely depends on their connections. In traditional timber construction, elements are usually connected with carpentry joints based on contact pressure and friction, often with only minor reinforcement generically intended to avoid disassembling. In current practice, interventions for the upgrading of carpentry joints are mainly based on empirical knowledge according to tradition. Often they produce a general strengthening of the connection, but are not specific for the case of seismic action. Strengthening on heuristic bases may be only partially effective or possibly disproportioned. The behavior of the carpentry joints most used in roof structures is examined. The birdsmouth joint, connecting rafters to the tie beam, has been studied first, characterizing its behavior numerically and experimentally in monotonic and cyclic conditions. Other forms of the rafter-to-tie connection, the double notch joint and the case of parallel rafters, are discussed. Some general criteria for the seismic strengthening of these joints are presented

  8. Robustness Analysis of Typologies of Reciprocal Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Parigi, Dario

    2013-01-01

    to the future development of typologies of reciprocal timber structures. The paper concludes that these kinds of structures can have a potential as long span timber structures in real projects if they are carefully designed with respect to the overall robustness strategies.......Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. In order to minimise the likelihood of such disproportionate structural failures many modern building...... codes consider the need for robustness in structures and provides strategies and methods to obtain robustness. Therefore a structural engineer may take necessary steps to design robust structures that are insensitive to accidental circumstances. The present paper outlines robustness issues related...

  9. Seismic Strengthening of Carpentry Joints in Traditional Timber Structures

    Science.gov (United States)

    Parisi, Maria A.; Cordié, Cinzia; Piazza, Maurizio

    2008-07-01

    The static and dynamic behavior of timber structures largely depends on their connections. In traditional timber construction, elements are usually connected with carpentry joints based on contact pressure and friction, often with only minor reinforcement generically intended to avoid disassembling. In current practice, interventions for the upgrading of carpentry joints are mainly based on empirical knowledge according to tradition. Often they produce a general strengthening of the connection, but are not specific for the case of seismic action. Strengthening on heuristic bases may be only partially effective or possibly disproportioned. The behavior of the carpentry joints most used in roof structures is examined. The birdsmouth joint, connecting rafters to the tie beam, has been studied first, characterizing its behavior numerically and experimentally in monotonic and cyclic conditions. Other forms of the rafter-to-tie connection, the double notch joint and the case of parallel rafters, are discussed. Some general criteria for the seismic strengthening of these joints are presented.

  10. Timber productivity research gaps for extensive forest management

    Science.gov (United States)

    L.C. Irland

    2011-01-01

    On extensive areas of small scale forests, significant opportunities for improving the value of future timber harvests while also improving other resource values are now being missed. A new focus on practical extensive management research is needed, especially as implementation of intensive practices has been declining in many areas, and new ‘‘close to nature’’...

  11. The supply and demand situation for oak timber

    Science.gov (United States)

    Kenneth L. Quigley

    1971-01-01

    Twenty oak species in the eastern United States account for one-third of the hardwood sawtimber volume and almost 10 percent of both hardwood and softwood growing-stock volume. The oak-hickory and oak-pine forest types occupy about 38 percent of the forest land in the eastern United States. Oak timber volume is increasing. Annual growth exceeds annual removals by about...

  12. Long-term Deformation Measurements of Atypical Roof Timber Structures

    Directory of Open Access Journals (Sweden)

    Jiří Bureš

    2014-06-01

    Full Text Available The paper includes conclusions from evaluation of results obtained from long-termmeasuring of innovative atypical roof timber structures. Based on the results ofmeasurements of vertical and horizontal deformation components it is possible to analyzethe real behavior of structures in given conditions. By assessing deformations in variousstages, including particularly external and internal environment temperatures, relative airhumidity and moisture content of wood, decisive parameters for real structure behaviorcan be established. The data are processed from period 2001 – 2013.

  13. WELFARE IMPLICATIONS OF TIMBERLAND OWNERSHIP CHANGES IN THE U.S. TIMBER MARKETS

    Directory of Open Access Journals (Sweden)

    Mohammad Mahfuzur Rahman

    2016-07-01

    Full Text Available In the last two decades, many forest product firms in the U.S. either divested their timberlands to timber investment management organizations (TIMOs and conservation organizations or converted their corporate structures from C corporations to real estate investment trusts (REITs. All landowners sold smaller timberland tracts for nonforestry uses. Reduced timber supplies from conservation organizations and timberland loss to other nonforestry uses have consequences on producer and consumer surpluses in the U.S. timber markets. Equilibrium displacement model has been employed to evaluate the welfare changes in U.S. timber markets attributed to timberland ownership changes. Net reduction of timber supply contributed to the reduction of social surplus by $43 million in 2006. Compared to the $33 billion plus U.S. timber markets, this welfare reduction was small. Overall, this article explains the shifts of economic surpluses among producers and net surplus reduction for the society attributed to timberland ownership changes in the United States.

  14. Sustainability and Security: Timber Certification in Asia-Pacific Region

    Directory of Open Access Journals (Sweden)

    Antonina Ivanova

    2008-10-01

    Full Text Available The expansion of sustainable development initiatives since the 1990’s reflected an emphasis on integrated solutions to economic development, socio-political stability and environmental health in the global community. In the same context the traditional concept of security needed to be open in two directions. First, the notion of security should no longer be applied only to the military realm, but also to the economic, the societal, the environmental, and the political fields. Second, the referent object of the “security” should not be conceptualized solely in terms of the state, but should embrace the individual below the state, and the international system above it. The forests industry timber certification in Asia-Pacific region has been selected as a case study because it is an excellent example to illustrate the links between the sustainable development and the environmental security, including also certain elements of economic security. This article is presenting a critical overview of the forest industry and the status of timber certification globally, with an emphasis on Asia – Pacific countries applying the Systemic Thinking approach. In conclusion, an outlook is presented concerning the future of timber certification and possible impacts on security and sustainable development.

  15. Geology, Burnst Timber Creek, west of fifth meridian, Alberta

    Energy Technology Data Exchange (ETDEWEB)

    1966-01-01

    The Burnt Timber Creek map-area lies in the southern Foothills of Alberta and includes a narrow strip of the Front Range of the Rocky Mts. along its western edge. The area may be divided into 3 principal structural units, underlain from west to east by the McConnell, Burnt Timber, and Fallentimber thrusts, respectively. McConnell thrust underlies the eastern edge of the mountains. Subsidiary folding and faulting are locally evident in the Paleozoic strata above the thrust. Beneath the McConnell thrust, Mesozoic and Paleozoic strata of the Burnt Timber thrust sheet are strongly overturned in the Panther anticline. The axis of this anticline trends northwest. A culmination along it, in the vicinity of Sheep Creek, deforms the McConnel thrust as well. A total of 16 wells have been drilled to date in 4 separate groups. Each group has revealed the presence of gas and 8 of the wells have been capped as potential gas producers. The reservoir rocks are of Mississippian and Devonian age. Shell Panther River No. 1 well (5-19-30-10W5) is remarkable in having tested at about 86% hydrogen sulfide.

  16. A cut above: building the market for fair trade timber

    Energy Technology Data Exchange (ETDEWEB)

    MacQueen, Duncan

    2008-02-15

    Unlike coffee and cotton, timber has yet to become a fair trade commodity. But now its time has come. Rights over forest resources are increasingly ceded to small-scale community forest enterprises (CFEs), as large-scale industrial logging is now largely discredited in the sustainable development context. The fair trade emphasis on just pricing for poorer producers is exactly what CFEs need as incentive to invest in sustainable forest management — and secure environmental and poverty reduction benefits at one stroke. With fair trade timber, CFEs could boost their entrepreneurial capacity using democratic business models with in-built social and environmental responsibility. The Fair Trade Labelling Organizations International and Forest Stewardship Council are exploring the ways and means through a new partnership, but more is needed. Consumers must be made aware of why paying higher prices is key to creating CFE incentives for sustainable forest management and poverty reduction. Time and money are needed for consumer education and installing fair trade timber in producer country forest policies, market segregation and procurement policies at all levels.

  17. The mechanical ventilation of suspended timber floors for radon remediation - a simple analysis

    International Nuclear Information System (INIS)

    Woolliscroft, M.

    1994-01-01

    Mechanical ventilation of the underfloor space is one of the most effective ways of reducing radon levels in buildings with suspended timber floors. There is a question, however, whether this ventilation should be supply or extract, sometimes extract is more effective, sometimes supply is more effective. This report presents a simple analysis of the problem and suggests the hypothesis that the relative effectiveness of supply or extract ventilation to the underfloor space depends on the relative airtightness of the floor and the soil or oversite surface. The analysis suggests that if the floor is relatively tight then supply ventilation may be more effective whereas if the floor is relatively leaky or there is oversite concrete then extract may be better. It is suggested that in either case it is better to keep the underfloor pressure low and that when mechanical ventilation is provided to the underfloor space it may be necessary to increase the number of airbricks. (author)

  18. An investigation and understanding of the mechanical response of Palmyrah timber

    International Nuclear Information System (INIS)

    Sobier, Hatim; Menzemer, C.C.; Srivatsan, T.S.

    2003-01-01

    The Palmyrah tree flourishes in tropical areas around South East Asia, and particularly in Sri Lanka. Palmyrah is an important economic resource for the region, and has found use in structural applications for both residential dwellings and commercial buildings. While there is a great deal of local field experience with Palmyrah, the mechanical properties have not been well characterized or understood. In an effort to assist engineers with the design and efficient use of the timber, a study was undertaken to evaluate the mechanical response of Palmyrah and develop estimates of design allowable properties. Properties evaluated include static bending strength, modulus, compression parallel and perpendicular to the grain, shear parallel to the grain and tensile strength parallel and perpendicular to the grain. In order to gain insight into the behavior of the wood, samples were examined using standard optical microscopy techniques. In addition, available fracture surfaces were examined using scanning electron microscopy

  19. Threshold responses of songbirds to long-term timber management on an active industrial forest

    Science.gov (United States)

    Becker, Douglas A.; Wood, Petra Bohall; Keyser, Patrick D.; Wigley, T. Bently; Dellinger, Rachel; Weakland, Cathy A.

    2011-01-01

    Forest managers often seek to balance economic benefits from timber harvesting with maintenance of habitat for wildlife, ecosystem function, and human uses. Most research on the relationship between avian abundance and active timber management has been short-term, lasting one to two years, creating the need to investigate long-term avian responses and to identify harvest thresholds when a small change in habitat results in a disproportionate response in relative abundance and nest success. Our objectives were to identify trends in relative abundance and nest success and to identify landscape-scale disturbance thresholds for avian species and habitat guilds in response to a variety of harvest treatments (clear-cuts, heavy and light partial harvests) over 14 years. We conducted point counts and monitored nests at an industrial forest in the central Appalachians of West Virginia during 1996–1998, 2001–2003, and 2007–2009. Early successional species increased in relative abundance across all three time periods, whereas interior-edge and forest-interior guilds peaked in relative abundance mid-study after which the forest-interior guild declined. Of 41 species with >10 detections, four (10%) declined significantly, 13 (32%) increased significantly (only three species among all periods), and 9 (22%) peaked in abundance mid-study (over the entire study period, four species had no significant change in abundance, four declined, and one increased). Based on piecewise linear models, forest-interior and interior-edge guilds’ relative abundance harvest thresholds were 28% total harvests (all harvests combined), 10% clear-cut harvests, and 18% light partial harvests, after which abundances declined. Harvest thresholds for the early successional guild were 42% total harvests, 11% clear-cut harvest, and 10% light partial harvests, and relative abundances increased after surpassing thresholds albeit at a reduced rate of increase after the clear-cut threshold. Threshold

  20. Some background of monitoring and NDT also useful for timber structures

    OpenAIRE

    Kurz, Jochen Horst; Boller, Christian

    2015-01-01

    Extension of the life of existing and historic timber structures has increased steadily in the last decade. Sustainability and low carbon emission have influenced activities in the construction industry. In the frame of the European COST Action FP 1101, several activities related to timber structures have been clustered. The COST Action FP 1101 consists of three working groups, namely Assessment (Working Group 1), Reinforcement (Working Group 2) and Monitoring (Working Group 3) of Timber Stru...

  1. The Level of Utilization of Secondary Timber Species among Furniture Producers

    OpenAIRE

    Antwi-Boasiako, Charles; Boadu, Kwadwo Boakye

    2016-01-01

    Background and Purpose: Inadequate supply of wood raw material is one of the major obstacles for the global furniture industry’s growth. Several secondary timbers/Lesser-Utilized-Species (LUS) that could substitute the scarce traditional timbers for furniture production exist in tropical forests. However, the industry continuously faces persistent timber shortages. The extent to which manufacturers utilize LUS as alternatives is unclear, which this study sought to ascertain. Materials and ...

  2. Robustness Analysis of a Wide-Span Timber Structure with Ductile Behaviour

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; Cizmar, D.

    2010-01-01

    This paper considers robustness evaluation of a wide span timber truss structure where the ductile behavior is taken into account. The robustness analysis is based on a structural reliability framework used on a simplified mechanical system modelling a timber truss system. A measure of ductile...... behaviour is introduced and for different values of this measure the robustness indices are estimated. The results indicate that the robustness of a timber truss system can be increased by taking the ductile behavior into....

  3. Characteristics of Timbers Dried Using Kiln Drying and Radio Frequency-Vacuum Drying Systems

    OpenAIRE

    Rabidin Zairul Amin; Seng Gan Kee; Wahab Mohd Jamil Abdul

    2017-01-01

    Heavy hardwoods are difficult-to-dry timbers as they are prone to checking and internal stresses when dried using a conventional kiln drying system. These timbers are usually dried naturally to reach 15% to 19% moisture content with an acceptable defects. Besides long drying time, timbers at these moisture contents are not suitable for indoor applications since they will further dry and causing, for example, jointing and lamination failures. Drying to a lower moisture content could only be ac...

  4. The Level of Utilization of Secondary Timber Species among Furniture Producers

    Directory of Open Access Journals (Sweden)

    Charles Antwi-Boasiako

    2016-06-01

    Full Text Available Background and Purpose: Inadequate supply of wood raw material is one of the major obstacles for the global furniture industry’s growth. Several secondary timbers/Lesser-Utilized-Species (LUS that could substitute the scarce traditional timbers for furniture production exist in tropical forests. However, the industry continuously faces persistent timber shortages. The extent to which manufacturers utilize LUS as alternatives is unclear, which this study sought to ascertain. Materials and Methods: Data were collected from 300 Timber Firms from Ghana primarily through questionnaires using the stratified random sampling technique. Results: Continuous decline and non-availability of preferred traditional timbers and competition from imported furniture were the main challenges confronting the furniture industry. Data obtained indicated that most manufacturers (85% hardly use any LUS; 44% of these mentioned lack of information on their properties and prospective uses and 32% attributed it to non-availability on the domestic timber markets. However, 22% of these producers rely on traditionally ‘well-known’ timbers (e.g. mixed red wood, Guarea cedrata and Tectona grandis owing to their strength properties, 20% due to their strength and durability and 14% because of their strength and aesthetic properties. Many LUS (with prospects for furniture-making available in great quantities in many tropical forests could substitute the over-dependent timbers. However, information on their properties and uses are hardly available to local producers, which affects their popularity among timber suppliers and manufacturers. Conclusion: To improve on the level of utilization of secondary timbers, wood workers must be supplied with comprehensive information about their properties and economic values. This will contribute to reducing pressure on the primary timbers, ensuring consistent supply of timber and keeping the sector operational.

  5. Outgrower timber schemes in KwaZulu-Natal – Do they build sustainable rural livelihoods and what interventions should be made?

    CSIR Research Space (South Africa)

    Cairns, RI

    2000-01-01

    Full Text Available Small-scale timber growers access commercial timber markets in KwaZulu-Natal through three mechanisms. These are; highly structured contractual arrangements (SAPPI, Lima and Mondi); membership in commercial forest-owners associations or timber...

  6. Timber Regulation and Value Chain in Community-Based Timber Enterprise and Smallholder Forestry in the Philippines

    Directory of Open Access Journals (Sweden)

    Juan M. Pulhin

    2016-07-01

    Full Text Available Forest tenure reform has no doubt attained significant gains in promoting social justice and equity in the forest sector, through legal recognition of the communities’ property rights over forest lands in many developing countries. This includes the right to harvest and market trees that the communities planted. Along these lines, the Philippines’ community-based forest management (CBFM and smallholder forestry have the potential to meet the country’s wood demand and contribute to its poverty alleviation goal. Realities on the ground, however, make this lofty aspiration seems too far-fetched. Formal and informal barriers along the timber value chain restrict the growth and obstruct opportunities for community-based timber enterprises (CBTEs and smallholder forestry. Using the case of CBFM and smallholder forestry in the Visayas and Mindanao Islands in the Philippines, respectively, this paper examines the hurdles posed by regulations and informal practices, such as restrictive policies and increased transaction costs, through a segment analysis of the timber value chain. It argues that failure to address these barriers would lead to the decline of CBTEs and smallholder enterprises, thus undermining the merits of the forest tenure reform.

  7. Discussion about the use of the volume specific surface area (VSSA) as a criterion to identify nanomaterials according to the EU definition. Part two: experimental approach.

    Science.gov (United States)

    Lecloux, André J; Atluri, Rambabu; Kolen'ko, Yury V; Deepak, Francis Leonard

    2017-10-12

    The first part of this study was dedicated to the modelling of the influence of particle shape, porosity and particle size distribution on the volume specific surface area (VSSA) values in order to check the applicability of this concept to the identification of nanomaterials according to the European Commission Recommendation. In this second part, experimental VSSA values are obtained for various samples from nitrogen adsorption isotherms and these values were used as a screening tool to identify and classify nanomaterials. These identification results are compared to the identification based on the 50% of particles with a size below 100 nm criterion applied to the experimental particle size distributions obtained by analysis of electron microscopy images on the same materials. It is concluded that the experimental VSSA values are able to identify nanomaterials, without false negative identification, if they have a mono-modal particle size, if the adsorption data cover the relative pressure range from 0.001 to 0.65 and if a simple, qualitative image of the particles by transmission or scanning electron microscopy is available to define their shape. The experimental conditions to obtain reliable adsorption data as well as the way to analyze the adsorption isotherms are described and discussed in some detail in order to help the reader in using the experimental VSSA criterion. To obtain the experimental VSSA values, the BET surface area can be used for non-porous particles, but for porous, nanostructured or coated nanoparticles, only the external surface of the particles, obtained by a modified t-plot approach, should be considered to determine the experimental VSSA and to avoid false positive identification of nanomaterials, only the external surface area being related to the particle size. Finally, the availability of experimental VSSA values together with particle size distributions obtained by electron microscopy gave the opportunity to check the

  8. A comprehensive approach to identify dominant controls of the behavior of a land surface-hydrology model across various hydroclimatic conditions

    Science.gov (United States)

    Haghnegahdar, Amin; Elshamy, Mohamed; Yassin, Fuad; Razavi, Saman; Wheater, Howard; Pietroniro, Al

    2017-04-01

    Complex physically-based environmental models are being increasingly used as the primary tool for watershed planning and management due to advances in computation power and data acquisition. Model sensitivity analysis plays a crucial role in understanding the behavior of these complex models and improving their performance. Due to the non-linearity and interactions within these complex models, Global sensitivity analysis (GSA) techniques should be adopted to provide a comprehensive understanding of model behavior and identify its dominant controls. In this study we adopt a multi-basin multi-criteria GSA approach to systematically assess the behavior of the Modélisation Environmentale-Surface et Hydrologie (MESH) across various hydroclimatic conditions in Canada including areas in the Great Lakes Basin, Mackenzie River Basin, and South Saskatchewan River Basin. MESH is a semi-distributed physically-based coupled land surface-hydrology modelling system developed by Environment and Climate Change Canada (ECCC) for various water resources management purposes in Canada. We use a novel method, called Variogram Analysis of Response Surfaces (VARS), to perform sensitivity analysis. VARS is a variogram-based GSA technique that can efficiently provide a spectrum of sensitivity information across a range of scales within the parameter space. We use multiple metrics to identify dominant controls of model response (e.g. streamflow) to model parameters under various conditions such as high flows, low flows, and flow volume. We also investigate the influence of initial conditions on model behavior as part of this study. Our preliminary results suggest that this type of GSA can significantly help with estimating model parameters, decreasing calibration computational burden, and reducing prediction uncertainty.

  9. Fire Resistance of Large-Scale Cross-Laminated Timber Panels

    Science.gov (United States)

    Henek, Vladan; Venkrbec, Václav; Novotný, Miloslav

    2017-12-01

    Wooden structures are increasingly being used in the construction of residential buildings. A common and often published reason to avoid wooden structures is their insufficient fire resistance, which reduces bearing capacity. For this reason, composite sandwich structures began to be designed to eliminate this drawback, as well as others. Recently, however, the trend is for a return to the original, wood-only variant and a search is underway for new technical means of improving the properties of such structures. Many timber structure technologies are known, but structures made from cross-laminated timber (CLT) panels have been used very often in recent years. CLT panels, also known as X-LAM, are currently gaining popularity in Europe. In the case of CLT panels composed of several layers of boards, they can be said to offer a certain advantage in that after the surface layer of a board has burnt and the subsurface layer has dried, oxygen is not drawn to the unburned wood for further combustion and thus the burning process ceases. CLT panels do not need to be specially modified or coated with fire resistant materials, although they are usually lined with gypsum-fibre fire resistant boards due to guidelines set out in the relevant standards. This paper presents a new method for the assessment of load-bearing perimeter walls fabricated from CLT panels without the use of an inner fire-retardant lining to ensure fire resistance at the level required by European standards (i.e. those harmonized for the Czech construction industry). The calculations were verified through laboratory tests which show that better parameters can be achieved during the classification of structures from the fire resistance point of view. The aim of the article is to utilize the results of assessment and testing by an accredited laboratory in order to demonstrate the possibilities of using CLT panels for the construction of multistorey as well as multi-purpose buildings in the Czech Republic.

  10. Identifying the tundra-forest border in the stomate record: an analysis of lake surface samples from the Yellowknife area, Northwest Territories, Canada

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, B.C.S. [Minnesota Univ., Minneapolis, MN (United States). Limnological Research Center; MacDonald, G.M. [California Univ., Los Angeles, CA (United States). Dept. of Botanical Sciences; Moser, K.A. [McMaster Univ., Hamilton, ON (Canada)

    1996-05-01

    The relationship between conifer stomata and existing vegetation across tundra, forest-tundra, and closed zones in the Yellowknife area of the Northwest Territories was studied. Conifer stomata were identified in surface samples from lakes in the treeline zone, but were absent in samples from tundra lakes. Stomate analysis was recorded and the results were presented in a concentration diagram plotting stomate concentrations according to vegetation zone. Conifer stomate analysis was not able to resolve differences between forest-tundra and closed forest. Nevertheless, it was suggested that stomate analysis will become an important technique supplementing pollen analysis for reconstructing past tree-line changes since the presence of stomata in lakes make it possible to separate the tundra from forest-tundra and closed forest. The limited dispersal of conifer stomata permitted a better resolution of tree-line boundaries than did pollen. 13 refs., 3 figs.

  11. Friction welding of wood – A fast, adhesive-free bonding technology for prefabricated elements in timber construction

    OpenAIRE

    Hahn, Benjamin; Hatt, Fred

    2013-01-01

    Up to now chemical adhesives based on polyurethane are used for the assembling of timber planks to large-scale structural elements, in particular cross-laminated timber panels (CLT), which opened new possibilities for architects and engineers in timber construction. The use of these adhesives still implicates, beside others, concerns about their impact on health and environment during application as well for later disposal. In order to overcome the geometrical limitations of timber by maintai...

  12. Oxalic acid as an assisting agent for the electrodialytic remediation of chromated copper arsenate treated timber waste

    DEFF Research Database (Denmark)

    Ribeiro, Alexandra B.; Mateus, Eduardo P.; Ottosen, Lisbeth M.

    1999-01-01

    The electrodialytic process is proposed as a technique for the remediation of chromated copper arsenate treated timber waste, using oxalic acid as assisting agent. The method prowed succesfull 93% Cu, 95% Cr and 99% As was removed from the timber.......The electrodialytic process is proposed as a technique for the remediation of chromated copper arsenate treated timber waste, using oxalic acid as assisting agent. The method prowed succesfull 93% Cu, 95% Cr and 99% As was removed from the timber....

  13. SOFRA and RPA: two views of the future of southern timber supply.

    Science.gov (United States)

    Darius Adams; John Mills; Ralph Alig; Richard. Haynes

    2005-01-01

    Two recent studies provide alternative views of the current state and future prospects of southern forests and timber supply: the Southern Forest Resource Assessment (SOFRA) and the Fifth Resources Planning Act Timber Assessment (RPA). Using apparently comparable data but different models and methods, the studies portray futures that in some aspects are quite similar...

  14. Development of a smart timber bridge girder with fiber optic sensors

    Science.gov (United States)

    James Wacker; Ursula Deza; Brent M. Phares; Terry J. Wipf

    2010-01-01

    Past timber bridge evaluation and maintenance efforts in the USA have principally focused on the internal integrity of timber components using various non-destructive evaluation tools to supplement visual inspection data. This project is part of a comprehensive effort to develop smart structure concepts for improving the long-term performance, maintenance, and...

  15. Market of innovative timber products in Europe and Serbia and their contribution to climate change mitigation

    Directory of Open Access Journals (Sweden)

    Sretenović Predrag

    2014-01-01

    Full Text Available The paper shows results of researching the market of glued laminated timber as the most frequent innovative timber product in constructing timber framed residential facilities in Europe and Serbia. The research included the development of production, consumption and trade flows for the most significant countries in the European Union and Serbia. Additionally, the paper gives characteristics of this innovative timber product regarding dimensions, allowed deviations of dimensions defined in adequate European standard, wood species it is made of and fire resistance. The last part of the paper shows results of econometric modeling of the impact of building timber-framed houses on the consumption of glued laminated timber in Austria as one of the countries belonging to the group of the largest consumers of this innovative timber product in Europe. Taking into consideration that the substitution of classic building materials, primarily concrete, steel and aluminum, with glued laminated timber in residential construction contributes to the reduction of carbon-dioxide emission and climate change mitigation, research results of the effects of such substitution are presented in the last chapter in this paper. [Projekat Ministarstva nauke Republike Srbije, br. III43007: Istraživanje klimatskih promena na životnu sredinu: praćenje uticaja, adaptacija i ublažavanje

  16. Live-load performance evaluation of historic covered timber bridges in the United States

    Science.gov (United States)

    Junwon Seo; Travis K. Hosteng; Brent M. Phares; James P. Wacker

    2015-01-01

    The National Historic Covered Bridge Preservation Program (NHCBP), sponsored by the Federal Highway Administration (FHWA), was established to preserve the covered timber bridge structures that were constructed in the early 1800s. Today, many of the approximately 880 covered timber bridges still in existence in the United States are closed to vehicular traffic;...

  17. Simplified Analytical Model for a Queen-Post Covered Timber Bridge

    Science.gov (United States)

    F Fanous; D. Rammer; T. Wipf

    2013-01-01

    During the 19th century, the economic material to build bridges was timber due to its abundant availability, cost, and ease of construction. Many of the well-known timber bridge types are the Burr arch, Town lattice, Howe, Queen and King type of trusses. This paper summarizes an investigation that was sponsored by the Federal Highway Administration and the USDA Forest...

  18. Field performance of timber bridges. 7, Connell Lake stress-laminated deck bridge

    Science.gov (United States)

    L. E. Hislop; M. A. Ritter

    The Connell Lake bridge was constructed in early 1991 on the Tongass National Forest, Alaska, as a demonstration bridge under the Timber Bridge Initiative. The bridge is a stress-laminated deck structure with an approximate 36-ft length and 18-ft width and is the first known stress-laminated timber bridge constructed in Alaska. Performance of the bridge was monitored...

  19. The Economics of Timber Supply: An Analytical Synthesis of Modeling Approaches

    Science.gov (United States)

    David N. Wear; Peter J. Parks

    1994-01-01

    The joint supply of timber and other services from forest environments plays a central role in most forest land debates. This paper defines a general conceptual model of timber supply that provides the context for discussing both individual harvest choice and aggregate supply models. While the structure and breadth of these models has developed considerably over the...

  20. Successful and unsuccessful attempts to resolve caribou management and timber harvesting issues in west central Alberta

    Directory of Open Access Journals (Sweden)

    David Hervieux

    1996-01-01

    Full Text Available Research studies of woodland caribou in west central Alberta began in 1979 in response to proposed timber harvesting on their winter ranges. Using results from initial studies, timber harvest guidelines were developed. A recent review of these guidelines, and the assumptions on which they were based, has resulted in a renegotiation by government and industry of timber harvesting on caribou range in west central Alberta. Caribou range in west central Alberta overlaps many jurisdictional boundaries: federal and provincial lands, four Forest Management Agreement Areas, three Alberta Land and Forest Service Regions and two Alberta Fish and Wildlife Service Regions. This jurisdictional complexity in combination with other factors such as total allocation of the timber resources, high levels of petroleum, natural gas and coal extraction activities, a high level of concern by public groups for caribou conservation and recent understanding of woodland caribou needs for abundant space has made resolution of caribou/timber harvest conflicts exceedingly slow and often relatively unproductive. This paper reviews 10 years of trying to resolve conflicts between timber harvesting and caribou conservation through meetings, committees, integrated resource planning, policy papers and public consultation. We describe what might be learned by other jurisdictions that are trying to resolve similar caribou/timber harvesting issues. We conclude with an overview of recent timber harvest planning initiatives on caribou range in west central Alberta.

  1. Nondestructive assessment of single-span timber bridges using a vibration- based method

    Science.gov (United States)

    Xiping Wang; James P. Wacker; Angus M. Morison; John W. Forsman; John R. Erickson; Robert J. Ross

    2005-01-01

    This paper describes an effort to develop a global dynamic testing technique for evaluating the overall stiffness of timber bridge superstructures. A forced vibration method was used to measure the natural frequency of single-span timber bridges in the laboratory and field. An analytical model based on simple beam theory was proposed to represent the relationship...

  2. Cut and Run: Illegal Logging and Timber Trade in the Tropics | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Illegal logging and trade in timber is a major cause of forest degradation in the world ... But controlling this global problem is not a simple matter of enacting new laws ... practices in the logging industry and timber trade of four tropical countries.

  3. Responses of timber rattlesnakes to fire: Lessons from two prescribed burns

    Science.gov (United States)

    Steven J. Beaupre; Lara E. Douglas

    2012-01-01

    Timber rattlesnakes (Crotalus horridus) are excellent model organisms for understanding the effects of large scale habitat manipulations because of their low-energy lifestyle, rapid response to changes in resource environment, uniform diet (small mammals), and simple behaviors. We present two case studies that illustrate interactions between timber...

  4. Expanding the scale of forest management: allocating timber harvests in time and space

    Science.gov (United States)

    Eric J. Gustafson

    1996-01-01

    This study examined the effect of clustering timber harvest zones and of changing the land use categories of zones (dynamic zoning) over varying temporal and spatial scales. Focusing on the Hoosier National Forest (HNF) in Indiana, USA as a study area, I used a timber harvest allocation model to simulate four management alternatives. In the static zoning alternative,...

  5. Service life assessment of timber highway bridges in USA climate zones

    Science.gov (United States)

    James P. Wacker; Brian K. Brashaw; Thomas G. Williamson; P. David Jones; Matthew S. Smith; Travis K. Hosteng; David L. Strahl; Lola E. Coombe; V.J. Gopu

    2014-01-01

    As engineers begin to estimate life-cycle costs and sustainable design approaches for timber bridges, there is a need for more reliable data about their durability and expected service life. This paper summarizes a comprehensive effort to assess the current condition of more than one hundred timber highway bridge superstructures throughout the United States. This...

  6. Sustainable forest management of tropical forests can reduce carbon emissions and stabilize timber production

    Science.gov (United States)

    N. Sasaki; G.P. Asner; Yude Pan; W. Knorr; P.B. Durst; H.O. Ma; I. Abe; A.J. Lowe; L.P. Koh

    2016-01-01

    The REDD+ scheme of the United Nations Framework Conventionon Climate Change has provided opportunities to manage tropical forests for timber production and carbon emission reductions. To determine the appropriate loggingtechniques, we analyzed potential timber production and carbon emission reductions under two logging techniques over a 40-year period of selective...

  7. 3 CFR - Establishment of the Interagency Committee on Trade in Timber Products from Peru and Assignment...

    Science.gov (United States)

    2010-01-01

    ... in Timber Products from Peru and Assignment of Function under Section 501 of the United States-Peru... Memorandum of May 1, 2009 Establishment of the Interagency Committee on Trade in Timber Products from Peru and Assignment of Function under Section 501 of the United States-Peru Trade Promotion Agreement...

  8. Concurring Regulation in European Forest Law; Forest Certification and the New EU Timber Regulation

    NARCIS (Netherlands)

    Kistenkas, F.H.

    2013-01-01

    Newly made EU Timber Regulation (EUTR) may prima facie look like competing regulation and an overlap of the existing forest certification schemes of FSC and PEFC as also EUTR combats illegally harvested timber. The novel EUTR, however, is a public law scheme wheras FSC and PEFC are private law

  9. Laboratory investigation of fire protection coatings for creosote-treated timber railroad bridges

    Science.gov (United States)

    Carol A. Clausen; Robert H. White; James P. Wacker; Stan T. Lebow; Mark A. Dietenberger; Samuel L. Zelinka; Nicole M. Stark

    2014-01-01

    As the incidence of timber railroad bridge fires increases, so has the need to develop protective measures to reduce the risk from accidental ignitions primarily caused by hot metal objects. Of the six barrier treatments evaluated in the laboratory for their ability to protect timbers from fires sourced with ignition from hot metal objects only one intumescent coating...

  10. Computer software to estimate timber harvesting system production, cost, and revenue

    Science.gov (United States)

    Dr. John E. Baumgras; Dr. Chris B. LeDoux

    1992-01-01

    Large variations in timber harvesting cost and revenue can result from the differences between harvesting systems, the variable attributes of harvesting sites and timber stands, or changing product markets. Consequently, system and site specific estimates of production rates and costs are required to improve estimates of harvesting revenue. This paper describes...

  11. The effects of population growth on timber management and inventories in Virginia

    Science.gov (United States)

    David N. Wear; Rei Liu; J. Michael Foreman; Raymond M. Sheffield

    1999-01-01

    Expanding human populations may have important effects on the availability of timber from private lands in the South. To examine the effects of development on timber supply, the authors compared the density of populations and various site variables with expert opinions on the future location of commercial timberland for a study site in Virginia. Population density is a...

  12. NDE investigation of the timber foundation in the historic Kennecott Mine Concentration Mill Building

    Science.gov (United States)

    James P. Wacker; Xiping Wang; Douglas R. Rammer; Bessie M. Woodward

    2011-01-01

    The U.S. National Park Service acquired the National Historic Copper Mine at Kennecott, Alaska, in 1998. There was uncertainty about the condition of the timber-cribbing foundation supporting the concentration mill, the largest building in the mine complex. A comprehensive on-site evaluation of the timber cribbing foundation was performed in summer 2009. The inspection...

  13. Timber resource statistics for the San Joaquin and southern California resource areas.

    Science.gov (United States)

    Bruce Hiserote; Joel Moen; Charles L. Bolsinger

    1986-01-01

    This report is one of five that provide timber resource statistics for 57 of the 58 counties in California (San Francisco is excluded). This report presents statistics from a 1982-84 inventory of the timber resources of Alpine, Amador, Calaveras, Fresno, Imperial, Inyo, Kern, Kings, Los Angeles, Madera, Mariposa, Merced, Mono, Orange, Riverside, San Bernardino, San...

  14. Guidelines for the on-site assessment of historic timber structures

    NARCIS (Netherlands)

    Cruz, H.; Yeomans, D.; Tsakanika, E.; Macchioni, N.; Jorissen, A.J.M.; Touza, M.; Mannucci, M.; Lourenco, P.B.

    2014-01-01

    In the scope of COST IE0601-WoodCulther (http://www.woodculther.org) it was agreed to produce Guidelines for the Assessment of Historic Timber Structures, covering the principles and possible approaches for the safety assessment of old timber structures of historical relevance, that could be used as

  15. Development of flexural vibration inspection techniques to rapidly assess the structural health of timber bridge systems

    Science.gov (United States)

    Xiping Wang; James P. Wacker; Robert J. Ross; Brian K. Brashaw; Robert Vatalaro

    2005-01-01

    This paper describes an effort to develop a global dynamic testing technique for evaluating the overall stiffness of timber bridge superstructures. A forced vibration method was used to measure the natural frequency of single-span timber bridges in the laboratory and field. An analytical model based on simple beam theory was proposed to represent the relationship...

  16. On calculating the pressure on cylindrical timbers of vertical shafts in clayey soils

    Energy Technology Data Exchange (ETDEWEB)

    Mizyumskii, V A

    1979-11-01

    In order to calculate the pressure built up on timbers which have been constructed to hold back freely moving soil in a clay environment, a formula is recommended which characterizes the state of clayey soil. The formula incorporates the parameters for volume information, momentary and long displacement modulus, decay factor of deformations of the after effect, viscosity factor in the starting zone of reforming. Because the timber creates a reaction pressure on the contour of the working, the radial travel of the timber is calculated and then the pressure on the timber. Correlation of the calculated pressure with the results of measurements in workings showed that the pressure of clayey soil on the timber is the result of viscous flow deformations. Disregarding these deformations, the pressures on the shaft timbering in the Yuzhno-Belozerskii deposit were calculated at 0.004 and 0.006 tons/m/sup 2/ respectively at a depth of 90 and 142 meters. After reworking the soil and setting up timbering the pressure was calculated at 2/3 of that of the highest measurements. The formula suggested is suitable for determining pressure on timbers having a large creep. (12 refs.) (In Russian)

  17. Splitting behaviour of timber loaded perpendicular to the grain by punched metal plates

    NARCIS (Netherlands)

    Schoenmakers, J.C.M.; Jorissen, A.J.M.; Leijten, A.J.M.; Aratake, S. xx

    2008-01-01

    Nowadays, prefabricated timber trusses are widely used as load-bearing roof structures. The majority of these trusses are produced with punched metal plates (PMP) to connect two or more timber elements of the same thickness, see Figure 2. In these structures sufficient overlap is required to prevent

  18. Dowel-type fastener connections in timber structures subjected to short-term loading

    DEFF Research Database (Denmark)

    Lauritzen Jensen, J.

    Design of dowel-type fastener connections in framed timber structures usually involves a two-step analysis: determination of the distribution of the sectional forces, and design of the eccentrically loaded connections. This report presents an integrated model for design of framed timber structures...

  19. Time-of-Flight Adjustment Procedure for Acoustic Measurements in Structural Timber

    Science.gov (United States)

    Danbiel F. Llana; Guillermo Iñiguez-Gonzalez; Francisco Arriaga; Xiping Wang

    2016-01-01

    The effect of timber length on time-of-flight acoustic longitudinal measurements was investigated on the structural timber of four Spanish species: radiata pine (Pinus radiata D. Don), Scots pine (Pinus sylvestris L.), laricio pine (Pinus nigra Arn.), and maritime pine (Pinus pinaster Ait.). Time-of-flight longitudinal measurements were conducted on 120 specimens of...

  20. Compressive capacity perpendicular to grain of fully supported timber beams of Poplar - model comparison

    NARCIS (Netherlands)

    Leijten, A.J.M.; Haddad, Y.M.

    2015-01-01

    In timber frame structures, for both residential and multi-storey purposes, timber elements are loaded perpendicular to grain. In the past, structural design code calculations were based on pre-set permissible strength values, applying empirical models with obscure background. Modern ultimate limit

  1. Structural attributes of two old-growth Cross Timbers stands in western Arkansas

    Science.gov (United States)

    Don C. Bragg; David W. Stahle; K. Chris Cerny

    2012-01-01

    Comprised of largely non-commercial, xeric, oak-dominated forests, the Cross Timbers in Arkansas have been heavily altered over the last two centuries, and thus only scattered parcels of old-growth timber remain. We inventoried and mapped two such stands on Fort Chaffee Military Training Center in Sebastian County, Arkansas. The west-facing Christmas Knob site is...

  2. Elementary and advanced modelling of the splitting strength of timber connections

    NARCIS (Netherlands)

    Schoenmakers, J.C.M.D.

    2008-01-01

    The load-bearing capacity of a timber member loaded perpendicular-to-grain by a connection is governed by either the embedment strength, the bending yield strength of the steel fasteners, or the splitting strength of the timber. Only coarse models for predicting the splitting strength are

  3. Dynamic programming for optimization of timber production and grazing in ponderosa pine

    Science.gov (United States)

    Kurt H. Riitters; J. Douglas Brodie; David W. Hann

    1982-01-01

    Dynamic programming procedures are presented for optimizing thinning and rotation of even-aged ponderosa pine by using the four descriptors: age, basal area, number of trees, and time since thinning. Because both timber yield and grazing yield are functions of stand density, the two outputs-forage and timber-can both be optimized. The soil expectation values for single...

  4. 36 CFR 223.7 - Permission for free use of timber outside free-use areas.

    Science.gov (United States)

    2010-07-01

    ..., DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER General Provisions § 223.7 Permission for free use of timber outside free-use areas. Similar material may be cut outside of a free-use area without permit in cases of emergency, but the person taking such material shall promptly notify...

  5. 36 CFR 223.193 - Procedures for reporting acquisition and disposition of unprocessed Federal timber.

    Science.gov (United States)

    2010-07-01

    ... for the calendar year listing, by company, from whom the timber was acquired; the date of acquisition... certificate stating that: (i) The certifier has read and understands the form; (ii) The certifier is eligible... applicable laws. (b) Transfer of unprocessed National Forest System timber. Each person who transfers to...

  6. Effects of timber harvest on aquatic vertebrates and habitat in the North Fork Caspar Creek

    Science.gov (United States)

    Rodney J. Nakamoto

    1998-01-01

    I examined the relationships between timber harvest, creek habitat, and vertebrate populations in the North and South forks of Caspar Creek. Habitat inventories suggested pool availability increased after the onset of timber harvest activities. Increased large woody debris in the channel was associated with an increase in the frequency of blowdown in the riparian...

  7. Timber resource statistics for non-Federal forest land in west-central Oregon.

    Science.gov (United States)

    Donald R. Gedney; Patricia M. Bassett; Mary A. Mei

    1987-01-01

    This report summarizes a 1985-86 timber resource inventory of the non-Federal forest land in the four counties (Benton, Lane, Lincoln, and Linn) in west-central Oregon. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

  8. Timber resource statistics for all forest land, except national forests, in eastern Oregon.

    Science.gov (United States)

    Donald R. Gedney; Patricia M. Bassett; Mary A. Mei

    1989-01-01

    This report summarizes a 1987 timber resource inventory of all forest land, except National Forests, in the 17 counties (Baker, Crook, Deschutes, Gilliam, Grant, Harney, Jefferson, Klamath, Lake, Malheur, Morrow, Sherman, Umatilla, Union, Wallowa, Wasco, and Wheeler Counties) in eastern Oregon. Detailed tables of forest area, timber volume, growth, mortality, and...

  9. Timber resource statistics for non-federal forest land in northwest Oregon.

    Science.gov (United States)

    Donald R. Gedney; Patricia M. Bassett; Mary A. Mei

    1986-01-01

    This report summarizes a 1986 timber resource inventory of the non-Federal forest land in the 10 counties (Clackamas, Clatsop, Columbia, Hood River, Marion, Multnomah , Polk, Tillamook, Washington, and Yamhill) in northwest Oregon. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

  10. Estimating bridge stiffness using a forced-vibration technique for timber bridge health monitoring

    Science.gov (United States)

    James P. Wacker; Xiping Wang; Brian Brashaw; Robert J. Ross

    2006-01-01

    This paper describes an effort to refine a global dynamic testing technique for evaluating the overall stiffness of timber bridge superstructures. A forced vibration method was used to measure the frequency response of several simple-span, sawn timber beam (with plank deck) bridges located in St. Louis County, Minnesota. Static load deflections were also measured to...

  11. Timber harvesting patterns for major states in the central, northern, and mid-Atlantic hardwood regions

    Science.gov (United States)

    William G. Luppold; Matthew S. Bumgardner

    2018-01-01

    Timber harvesting is a major disturbance agent influencing the composition and structure of eastern hardwood forests. To better understand timber harvesting practices, we examined roundwood harvesting patterns in 13 eastern states in the Central, Mid-Atlantic, and Northern regions that contained high proportional volumes of hardwood in their forest inventories. Nearly...

  12. Nondestructive assessment of timber bridges using a vibration-based method

    Science.gov (United States)

    Xiping Wang; James P. Wacker; Robert J. Ross; Brian K. Brashaw

    2005-01-01

    This paper describes an effort to develop a global dynamic testing technique for evaluating the overall stiffness of timber bridge superstructures. A forced vibration method was used to measure the natural frequency of single-span timber bridges in the laboratory and field. An analytical model based on simple beam theory was proposed to represent the relationship...

  13. Clustering Timber Harvests and the Effects of Dynamic Forest Management Policy on Forest Fragmentation

    Science.gov (United States)

    Eric J. Gustafson

    1998-01-01

    To integrate multiple uses (mature forest and commodity production) better on forested lands, timber management strategies that cluster harvests have been proposed. One such approach clusters harvest activity in space and time, and rotates timber production zones across the landscape with a long temporal period (dynamic zoning). Dynamic zoning has...

  14. 36 CFR 223.6 - Cutting and removal of timber in free-use areas.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Cutting and removal of timber... OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER General Provisions § 223.6 Cutting... or designated by forest officers may be cut and removed for personal use for domestic purposes...

  15. Agroforestry systems of timber species and cacao: survival and growth during the early stages

    Directory of Open Access Journals (Sweden)

    Wilmer Espinoza

    2013-08-01

    Full Text Available In recent times, increased emphasis has been placed on diversifying the types of trees to shade cacao (Theobromacacao L. and to achieve additional services. Agroforestry systems that include profitable and native timber trees are a viable alternative but it is necessary to understand the growth characteristics of these species under different environmental conditions. Thus, timber tree species selection should be based on plant responses to biotic and abiotic factors. The aims of this study were (1 to evaluate growth rates and leaf area indices of the four commercial timber species: Cordia thaisiana, Cedrela odorata, Swietenia macrophylla and Tabebuia rosea in conjunction with incidence of insect attacks and (2 to compare growth rates of four Venezuelan Criollo cacao cultivars planted under the shade of these four timber species during the first 36 months after establishment. Parameters monitored in timber trees were: survival rates, growth rates expressed as height and diameter at breast height and leaf area index. In the four Cacao cultivars: height and basal diameter. C. thaisiana and C. odorata had the fastest growth and the highest survival rates. Growth rates of timber trees will depend on their susceptibility to insect attacks as well as to total leaf area. All cacao cultivars showed higher growth rates under the shade of C. odorata. Growth rates of timber trees and cacao cultivars suggest that combinations of cacao and timber trees are a feasible agroforestry strategy in Venezuela.

  16. Managing for timber and biodiversity in the Congo Basin

    DEFF Research Database (Denmark)

    Nasi, Robert; Billand, Alain; van Vliet, Nathalie

    2012-01-01

    concessions) and analyze the existing issues and options for managing actively both timber and biodiversity with a special emphasis on wildlife and the role of certification. A few promising but yet ‘unfinished’ examples do exist in the region and we review these cases to draw lessons and recommendations. We...... contend however that true multiple-use could only be realized by expanding beyond boundaries of formal management units through new innovative land-use units, allowing a spatial cohabitation of the interests of local people, of conservation proponents and of extractive industries in the same management...

  17. Long-term behaviour of timber structures in torrent control

    Science.gov (United States)

    Rickli, Christian; Graf, Frank

    2014-05-01

    Timber is widely used for protection measures in torrent control. However, life span of woody constructions such as timber check dams is limited due to fungal decay. However, only sparse scientific information is available on the long-term behaviour of timber structures and the colonisation with decay fungi. Related to this, in practice a controversial discussion has been going on if either Norway Spruce (Picea abies) or Silver Fir (Abies alba) is more enduring and if bark removal increases resistance against fungal decay. In order to going into this matter a series of 15 timber check dams built in 1996 has been monitored. The constructions were alternatively realised with Norway Spruce and Silver Fir, half of them each with remaining and removed bark, respectively. The scientific investigations included the documentation of colonisation with rot fungi and the identification of decayed zones with a simple practical approach as well as based on drilling resistance. Colonisation by decay fungi started three years after construction (e.g. Gloeophyllum sepiarium), detecting two years later first parts with reduced wood resistance. Sixteen years after construction decay was found on all check dams but two. Wood quality was markedly better in watered sections compared to the occasionally dry lateral abutment sections. Taking the whole check dams into consideration, slightly more decay was detected in Norway Spruce compared to logs in Silver Fir and both the practical approach and the drilling resistance measurement yielded in more defects on logs without bark. However, due to limited number of replications and fungal data, it was not possible to statistically verify these results. Statistical analysis was restricted to the drilling resistance data and fruit-bodies of decay fungi of the uppermost log of each check dam. Based on this limited analysis significant differences in the effect on the drilling resistance were found for watered sections and lateral abutments

  18. FIRE PROTECTION OF TIMBER STRUCTURES STRENGTHENED WITH FRP MATERIALS

    Directory of Open Access Journals (Sweden)

    Radek Zigler

    2015-12-01

    Full Text Available Modern, progressive methods of structures’ strengthening based on the use of composite materials composed of high strength fibers (carbon, glass, aramid or basalt and matrices based on epoxy resins brings, among many indisputable advantages (low weight, high effectiveness, easy application etc. also some disadvantages. One of the major disadvantages is a low fire resistance of these materials due to the low glass transition temperature Tg of the resin used. Based on an extensive research of strengthening of historic structures with FRP materials [1], the article outlines possible approaches to this problem, especially while strengthening timber load- bearing structures of historic buildings.

  19. On the Architectural Qualities of Cross Laminated Timber

    DEFF Research Database (Denmark)

    Bejder, Anne Kirkegaard; Kirkegaard, Poul Henning; Fisker, Anna Marie

    2010-01-01

    In resent years wood as a building material has gain renewed focus and with that new production methods and wooden products have been developed. One of these products is Cross Laminated Timber (CLT) which, by means of high-technology production and a distinctive construction with layers of lamellae...... glued together crosswise, possesses structural capacities which are out of woods nature. Several research studies have clarified that CLT has many qualities within the engineering field but knowledge regarding its applications and aesthetics is more insufficient. Thus, the purpose of this paper...

  20. Effect of Load Duration on Timber Structures in Denmark

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Stang, Birgitte Friis Dela; Svensson, Staffan

    2003-01-01

    . The parameters in these models are fitted by the Maximum Likelihood Method using data relevant for Danish structural timber and the statistical uncertainty is quantified. The reliability is evaluated using representative shortand long-term limit states, and the load duration factor kmod is estimated using......Load duration effects are estimated on basis of simulation of realizations of wind, snow and imposed loads in accordance with the load models in the Danish structural codes. Three damage accumulation models are considered, namely Gerhards model, Barret & Foschi's model and Foschi & Yao's model...

  1. Solar water heating and its prospect for timber drying application

    Energy Technology Data Exchange (ETDEWEB)

    Yin, B T

    1982-01-01

    The technical requirements for timber drying are discussed, and the possibility of using a solar water heating system to substitute for conventional fuel in a modern kiln is looked into from heat transfer considerations. At the moment, conventional fuel is used to generate steam for the heating of air in a kiln. If hot water is to be substitued for steam as the heating medium, the heating coil size required is larger. This size is determined relative to that of a steam coil for similar kiln operating temperatures. 5 references.

  2. Mechanical properties of timber from wind damaged Norway spruce

    DEFF Research Database (Denmark)

    Hoffmeyer, Preben

    2003-01-01

    A storm may subject a tree to such bending stresses that extensive compression damage develops in the lee side. The tree may survive the wind load or it may be thrown. However, the damage is inherent and it may be of a magnitude to influence the mechanical properties of boards sawn from the stem....... The paper reports on a investigation of the relation between degree of damage and mechanical proper-ties of sawn timber from wind damaged Norway spruce. The project included about 250 bolts from wind damaged trees. The majority of bolts were cut to deliver a full-diameter plank containing the pith...

  3. 77 FR 2508 - Rogue River-Siskiyou National Forest, Powers Ranger District, Coos County, OR; Eden Ridge Timber...

    Science.gov (United States)

    2012-01-18

    ... Plan, page C-39). Specifically for the Eden Ridge Timber Sales project, Needs include: Improvement of... District, Coos County, OR; Eden Ridge Timber Sales AGENCY: Forest Service, USDA. ACTION: Corrected Notice of Intent to prepare an environmental impact statement for the Eden Ridge Timber Sales. The original...

  4. 31 CFR 593.510 - Transactions related to the importation of any round log or timber product originating in Liberia...

    Science.gov (United States)

    2010-07-01

    ... importation of any round log or timber product originating in Liberia authorized. 593.510 Section 593.510... importation of any round log or timber product originating in Liberia authorized. Except as otherwise... into the United States of any round log or timber product originating in Liberia are authorized. ...

  5. 36 CFR 251.14 - Conditions, rules and regulations to govern exercise of timber rights reserved in conveyance to...

    Science.gov (United States)

    2010-07-01

    ... timber products and in locating, constructing and using mills, logging roads, railroads, chutes, landings..., and to young growth or to trees left standing. All survey monuments and witness trees shall be preserved. (3) All trees, timber or timber products of species or sizes not specifically reserved which are...

  6. Finite-Element Modeling of Timber Joints with Punched Metal Plate Fasteners

    DEFF Research Database (Denmark)

    Ellegaard, Peter

    2006-01-01

    The focus of this paper is to describe the idea and the theory behind a finite-element model developed for analysis of timber trusses with punched metal plate fasteners (nail plates). The finite-element model includes the semirigid and nonlinear behavior of the joints (nonlinear nail and plate...... elements) and contact between timber beams, if any (bilinear contact elements). The timber beams have linear-elastic properties. The section forces needed for design of the joints are given directly by the finite-element model, since special elements are used to model the nail groups and the nail plate...... the behavior of the joints very well at lower load levels. At higher load levels the stiffness is overestimated due to development of cracks in the timber and the linear-elastic timber properties in the finite-element model....

  7. Reliability-Based Calibration of Load Duration Factors for Timber Structures

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Svensson, Staffan; Stang, Birgitte Friis Dela

    2005-01-01

    John Dalsgaard Sørensen, Staffan Svensson, Birgitte Dela Stang : Reliability-Based Calibration of Load Duration Factors for Timber Structures     Abstract :   The load bearing capacity of timber structures decrease with time depending on the type of load and timber. Based on representative limit...... states and stochastic models for timber structures, load duration factors are calibrated using probabilistic methods. Load duration e.ects are estimated on basis of simulation of realizations of wind, snow and imposed loads in accordance with the load models in the Danish structural codes. Three damage...... accumulation models are considered, namely Gerhards model, Barrett and Foschi _ s model and Foschi and Yao _ s model. The parameters in these models are .tted by the Maximum Likelihood Method using data relevant for Danish structural timber and the statistical uncertainty is quanti .ed. The reliability...

  8. Accuracy Assessment of Timber Volume Maps Using Forest Inventory Data and LiDAR Canopy Height Models

    Directory of Open Access Journals (Sweden)

    Andreas Hill

    2014-09-01

    Full Text Available Maps of standing timber volume provide valuable decision support for forest managers and have therefore been the subject of recent studies. For map production, field observations are commonly combined with area-wide remote sensing data in order to formulate prediction models, which are then applied over the entire inventory area. The accuracy of such maps has frequently been described by parameters such as the root mean square error of the prediction model. The aim of this study was to additionally address the accuracy of timber volume classes, which are used to better represent the map predictions. However, the use of constant class intervals neglects the possibility that the precision of the underlying prediction model may not be constant across the entire volume range, resulting in pronounced gradients between class accuracies. This study proposes an optimization technique that automatically identifies a classification scheme which accounts for the properties of the underlying model and the implied properties of the remote sensing support information. We demonstrate the approach in a mountainous study site in Eastern Switzerland covering a forest area of 2000 hectares using a multiple linear regression model approach. A LiDAR-based canopy height model (CHM provided the auxiliary information; timber volume observations from the latest forest inventory were used for model calibration and map validation. The coefficient of determination (R2 = 0.64 and the cross-validated root mean square error (RMSECV = 123.79 m3 ha−1 were only slightly smaller than those of studies in less steep and heterogeneous landscapes. For a large set of pre-defined number of classes, the optimization model successfully identified those classification schemes that achieved the highest possible accuracies for each class.

  9. Trade-offs between three forest ecosystem services across the state of New Hampshire, USA: timber, carbon, and albedo.

    Science.gov (United States)

    Lutz, David A; Burakowski, Elizabeth A; Murphy, Mackenzie B; Borsuk, Mark E; Niemiec, Rebecca M; Howarth, Richard B

    2016-01-01

    Forests are more frequently being managed to store and sequester carbon for the purposes of climate change mitigation. Generally, this practice involves long-term conservation of intact mature forests and/or reductions in the frequency and intensity of timber harvests. However, incorporating the influence of forest surface albedo often suggests that long rotation lengths may not always be optimal in mitigating climate change in forests characterized by frequent snowfall. To address this, we investigated trade-offs between three ecosystem services: carbon storage, albedo-related radiative forcing, and timber provisioning. We calculated optimal rotation length at 498 diverse Forest Inventory and Analysis forest sites in the state of New Hampshire, USA. We found that the mean optimal rotation lengths across all sites was 94 yr (standard deviation of sample means = 44 yr), with a large cluster of short optimal rotation lengths that were calculated at high elevations in the White Mountain National Forest. Using a regression tree approach, we found that timber growth, annual storage of carbon, and the difference between annual albedo in mature forest vs. a post-harvest landscape were the most important variables that influenced optimal rotation. Additionally, we found that the choice of a baseline albedo value for each site significantly altered the optimal rotation lengths across all sites, lowering the mean rotation to 59 yr with a high albedo baseline, and increasing the mean rotation to 112 yr given a low albedo baseline. Given these results, we suggest that utilizing temperate forests in New Hampshire for climate mitigation purposes through carbon storage and the cessation of harvest is appropriate at a site-dependent level that varies significantly across the state.

  10. Cross-laminated timber made of Hungarian raw materials

    Science.gov (United States)

    Marko, G.; Bejo, L.; Takats, P.

    2016-04-01

    Cross-laminated timber (CLT), generally made out of softwood, enjoys increasing popularity throughout Europe. This material offers a versatile, eco-friendly technology to create strong, lightweight and energy-efficient buildings. Unfortunately, the sites and climatic conditions in Hungary are not suitable for growing high-quality coniferous trees. Transporting raw materials from other countries (sometimes thousands of kilometres away) negates the environmental advantages of wood-based construction. Local options are definitely preferable from an ecological aspect. Poplar wood (populus spp.) is of great economic importance in Hungary. There are several relatively high density, high strength varieties growing in large quantities in Hungary, that may be used as alternatives to softwood, with comparable properties. There is an increasing interest in using poplar as a construction material, especially in regions were there is a shortage of traditional construction timber. This paper presents the results of a preliminary investigation to create CLT using poplar lumber. Laboratory-scale CLT specimens were created in a hot press, and tested for their loadbearing capacity. The MOR values of poplar CLT are comparable to, albeit somewhat lowerthan those of softwood CLT. Further investigations are required to establish the economic viability and technological conditions for the commercial production of poplar CLT.

  11. A review on environmental education in Myanmar Timber Enterprise

    International Nuclear Information System (INIS)

    Khin-Zaw

    2001-08-01

    Environmental education in the Myanmar Timber Enterprise (MTE) began formally in 1996. Environmental considerations had been incorporated in the deparmental instructions and operation manuals of extraction and wood processing since the emergence of MTE, then named STate Timber Board in 1948, but the modern concept of environmental conservation for sustainable development was introduced to the staff of MTE beginning only in 1996. The training contents constitute the defintion of environmental conservation as sustainable development, global environmental awareness, Myanmar's participation in global environmental undertakings, national institution and awareness progammes, the concept of reduced impact logging, code of harvesting, and above all, the environmental impact assessment (EIA) methodology as a tool for environmental management. In the MTE, 20 officers have been trained at a two-week workshop on EIA; 180 trainees from the Extraction Department, mostly the persons in charge of extraction ranges, have been trained at five-day short and mobile trainings on EIA around the country; and 948 officers and subordinate staff have been trained at the vocational training centres of MTE covering the above outline of the course, depending upon the training duration and trainees' rank, up to the end of December, 2000. Evaluation on EIA workshop and some training courses, problems and constraints encountered at the trainings and suggestions sought are also discussed in the paper. (author)

  12. Assessments of the market prospects for Myanmar timber

    International Nuclear Information System (INIS)

    Tin-Maung-Win

    2001-08-01

    Myanmar has been exporting teak and hardwood logs and conversions for a long time. It is found that there are three types of market situations with regard to logs and conversions. They are: situation that the demand of the market is strong; situation that the market has just picked up; situation that the demand is sluggish. Countries where the demand is strong are India, Thailand and Malaysia. Countries where the market is picking up are Singapore, PRC and the Middle East. Similarly, Europe's market is on the rise. Japan, Korea, Hong Kong and Pakistan markets are sluggish temporarily. North America's market can be said to be sluggish too. It is found that Australia has not been buying timber directly from Myanmar for the last few years and that it may not be in a position to buy Myanmar teak voluminously in the near future either. This paper is therefore a report focused on Myanmar Timber Enterprises' endeavour to earn foreign exchange in US Dollars and its assessment and evaluation of the market. The international market situation is studied and each country's situation focused on and presented. (author)

  13. Noise, Worker Perception, and Worker Concentration in Timber Harvesting Activity

    Directory of Open Access Journals (Sweden)

    Efi Yuliati Yovi

    2012-01-01

    Full Text Available Timber harvesting activities are unquestionably related with high risk of work accidents and health disorders.Such activities were not only burdened the workers with heavy physical workloads due to uneasy workingenvironment, and massive work materials and tools, but also physiopsychologically burdened workers as theywere imposed with both mechanical and acoustic vibrations (noise produced by the chainsaw. However,  it is acommon practice that most of the workers still ignored the importance of the use of noise reduction devices suchas earmuff or ear plug.  This study was aimed to reveal the factual effects of noise on work concentration of theworkers to provide a scientific basis in supporting efforts in improving workers’ attitude.  The results confirmedthat chainsaw might produce noise during operation.  Noise intensities received by both right and left ears werenot significantly different, indicating that left-handed and normal workers received similar degree of noise inboth side of ears. Further, results also showed that there was a significant difference on the perception and workconcentration of chainsaw operators versus sedentary people to the noise.  These findings proved that hearingability of chainsaw operators had declined due to frequent noise exposure.Keywords: timber harvesting, physio-psychological disorder, noise, chainsaw

  14. Proteome analysis identifies the Dpr protein of Streptococcus mutans as an important factor in the presence of early streptococcal colonizers of tooth surfaces.

    Directory of Open Access Journals (Sweden)

    Akihiro Yoshida

    Full Text Available Oral streptococci are primary colonizers of tooth surfaces and Streptococcus mutans is the principal causative agent of dental caries in humans. A number of proteins are involved in the formation of monospecies biofilms by S. mutans. This study analyzed the protein expression profiles of S. mutans biofilms formed in the presence or absence of S. gordonii, a pioneer colonizer of the tooth surface, by two-dimensional gel electrophoresis (2-DE. After identifying S. mutans proteins by Mass spectrometric analysis, their expression in the presence of S. gordonii was analyzed. S. mutans was inoculated with or without S. gordonii DL1. The two species were compartmentalized using 0.2-μl Anopore membranes. The biofilms on polystyrene plates were harvested, and the solubilized proteins were separated by 2-DE. When S. mutans biofilms were formed in the presence of S. gordonii, the peroxide resistance protein Dpr of the former showed 4.3-fold increased expression compared to biofilms that developed in the absence of the pioneer colonizer. In addition, we performed a competition assay using S. mutans antioxidant protein mutants together with S. gordonii and other initial colonizers. Growth of the dpr-knockout S. mutans mutant was significantly inhibited by S. gordonii, as well as by S. sanguinis. Furthermore, a cell viability assay revealed that the viability of the dpr-defective mutant was significantly attenuated compared to the wild-type strain when co-cultured with S. gordonii. Therefore, these results suggest that Dpr might be one of the essential proteins for S. mutans survival on teeth in the presence of early colonizing oral streptococci.

  15. Proteome Analysis Identifies the Dpr Protein of Streptococcus mutans as an Important Factor in the Presence of Early Streptococcal Colonizers of Tooth Surfaces

    Science.gov (United States)

    Yoshida, Akihiro; Niki, Mamiko; Yamamoto, Yuji; Yasunaga, Ai; Ansai, Toshihiro

    2015-01-01

    Oral streptococci are primary colonizers of tooth surfaces and Streptococcus mutans is the principal causative agent of dental caries in humans. A number of proteins are involved in the formation of monospecies biofilms by S. mutans. This study analyzed the protein expression profiles of S. mutans biofilms formed in the presence or absence of S. gordonii, a pioneer colonizer of the tooth surface, by two-dimensional gel electrophoresis (2-DE). After identifying S. mutans proteins by Mass spectrometric analysis, their expression in the presence of S. gordonii was analyzed. S. mutans was inoculated with or without S. gordonii DL1. The two species were compartmentalized using 0.2-μl Anopore membranes. The biofilms on polystyrene plates were harvested, and the solubilized proteins were separated by 2-DE. When S. mutans biofilms were formed in the presence of S. gordonii, the peroxide resistance protein Dpr of the former showed 4.3-fold increased expression compared to biofilms that developed in the absence of the pioneer colonizer. In addition, we performed a competition assay using S. mutans antioxidant protein mutants together with S. gordonii and other initial colonizers. Growth of the dpr-knockout S. mutans mutant was significantly inhibited by S. gordonii, as well as by S. sanguinis. Furthermore, a cell viability assay revealed that the viability of the dpr-defective mutant was significantly attenuated compared to the wild-type strain when co-cultured with S. gordonii. Therefore, these results suggest that Dpr might be one of the essential proteins for S. mutans survival on teeth in the presence of early colonizing oral streptococci. PMID:25816242

  16. Reconciling Biodiversity Conservation and Timber Production in Mixed Uneven-Aged Mountain Forests: Identification of Ecological Intensification Pathways.

    Science.gov (United States)

    Lafond, Valentine; Cordonnier, Thomas; Courbaud, Benoît

    2015-11-01

    Mixed uneven-aged forests are considered favorable to the provision of multiple ecosystem services and to the conciliation of timber production and biodiversity conservation. However, some forest managers now plan to increase the intensity of thinning and harvesting operations in these forests. Retention measures or gap creation are considered to compensate potential negative impacts on biodiversity. Our objectives were to assess the effect of these management practices on timber production and biodiversity conservation and identify potential compensating effects between these practices, using the concept of ecological intensification as a framework. We performed a simulation study coupling Samsara2, a simulation model designed for spruce-fir uneven-aged mountain forests, an uneven-aged silviculture algorithm, and biodiversity models. We analyzed the effect of parameters related to uneven-aged management practices on timber production, biodiversity, and sustainability indicators. Our study confirmed that the indicators responded differently to management practices, leading to trade-offs situations. Increasing management intensity had negative impacts on several biodiversity indicators, which could be partly compensated by the positive effect of retention measures targeting large trees, non-dominant species, and deadwood. The impact of gap creation was more mitigated, with a positive effect on the diversity of tree sizes and deadwood but a negative impact on the spruce-fir mixing balance and on the diversity of the understory layer. Through the analysis of compensating effects, we finally revealed the existence of possible ecological intensification pathways, i.e., the possibility to increase management intensity while maintaining biodiversity through the promotion of nature-based management principles (gap creation and retention measures).

  17. Eleventh-century shift in timber procurement areas for the great houses of Chaco Canyon.

    Science.gov (United States)

    Guiterman, Christopher H; Swetnam, Thomas W; Dean, Jeffrey S

    2016-02-02

    An enduring mystery from the great houses of Chaco Canyon is the origin of more than 240,000 construction timbers. We evaluate probable timber procurement areas for seven great houses by applying tree-ring width-based sourcing to a set of 170 timbers. To our knowledge, this is the first use of tree rings to assess timber origins in the southwestern United States. We found that the Chuska and Zuni Mountains (>75 km distant) were the most likely sources, accounting for 70% of timbers. Most notably, procurement areas changed through time. Before 1020 Common Era (CE) nearly all timbers originated from the Zunis (a previously unrecognized source), but by 1060 CE the Chuskas eclipsed the Zuni area in total wood imports. This shift occurred at the onset of Chaco florescence in the 11th century, a time with substantial expansion of existing great houses and the addition of seven new great houses in the Chaco Core area. It also coincides with the proliferation of Chuskan stone tools and pottery in the archaeological record of Chaco Canyon, further underscoring the link between land use and occupation in the Chuska area and the peak of great house construction. Our findings, based on the most temporally specific and replicated evidence of Chacoan resource procurement obtained to date, corroborate the long-standing but recently challenged interpretation that large numbers of timbers were harvested and transported from distant mountain ranges to build the great houses at Chaco Canyon.

  18. Timbered Architecture in the Regions of the Walddeutsche Settlements

    Science.gov (United States)

    Hrehorowicz – Gaber, Hanna

    2017-10-01

    The centuries-old Polish history, its complicated fortunes and borders changing over the centuries have caused the cultural heritage to be a reflection of the fate of the inhabitants, the intermingling of ethnic groups and the common formation of the culture of the region. The cultural area of southern Poland is particularly full of layers, where diverse historical and geographical influences blend together. That is why the presence of the common construction type for the wooden objects on the two ends of southern Poland, in two different geographical realms, is such an interesting testimony of the Polish cultural melting pot. The main area of the occurrence of the timbered architecture is the borderland of Germany, the Czech Republic and Poland. This type of houses was built for the first time in the Middle Ages in the area of Upper Lusatia, then this type of housing has spread to northern Czech Republic and the western part of Lower Silesia. In Poland, there are two main clusters of the occurrence of timbered structures: in Lower Silesia and in the Subcarpathian province, where this type of buildings has been rooted with the German settlers, called the Walddeutsche in this area. The colonisation was also accompanied by the model of settlement village systems moved from the west, the development of the plot, and this specific type of construction. The architecture of the Jasielsko-Sanockie Valleys and the Dynowskie foothills is an interesting, though a very poor form in relation to the Sudeten houses, as the architecture non-recurring in other Polish regions has been formed as a result of the intermingling of the cultures. In this area, the houses and farm buildings with the timbered structures were used most often by farmers and they were not too impressive, so that the residents did not notice their uniqueness. Today, in the natural landscape, they disappear one by one, as a result of lack of maintenance and the replacement of the old materials with objects of a

  19. Tradeoffs between Three Forest Ecosystem Services across the State of New Hampshire, USA: Timber, Carbon, and Albedo

    Science.gov (United States)

    Lutz, D. A.; Burakowski, E. A.; Murphy, M. B.; Borsuk, M. E.; Niemiec, R. M.; Howarth, R. B.

    2014-12-01

    Albedo is an important physical property of the land surface which influences the total amount of incoming solar radiation that is reflected back into space. It is a critical ecosystem service that helps regulate the Earth's energy balance and, in the context of climate mitigation, has been shown to have a strong influence on the overall effectiveness of land management schemes designed to counteract climate change. Previously, we demonstrated that incorporating the physical effects of albedo into an ecological economic forest model of locations in the White Mountain National Forest, in New Hampshire, USA, leads to a substantially shorter optimal rotation period for forest harvest than under a carbon- and timber-only approach. In this study, we investigate similar tradeoffs at 565 sites across the entire state of New Hampshire in a variety of different forest types, latitudes, and elevations. Additionally, we use a regression tree approach to calculate the influence of biogeochemical and physical factors on the optimal rotation period. Our results suggest that in many instances, incorporating albedo may lead to optimal rotation times approaching zero, or, perpetual clear-cut. Overall, the difference between growing season and winter-time albedo for forested and harvested states was the most significant variable influencing the rotation period, followed by timber stumpage price, and biomass growth rate. These results provide an initial understanding of tradeoffs amongst these three ecosystem services and provide guidance for forest managers as to the relative important properties of their forests when these three services are incentivized economically.

  20. Predicting moisture state of timber members in a continuously varying climate

    DEFF Research Database (Denmark)

    Svensson, Staffan; Turk, Goran; Hozjan, Tomaz

    2011-01-01

    A prerequisite for a sensible estimate of moisture induced stresses in timber members is an accurate prediction of the members’ moisture states during their service life. There are, however, an infinite number of possible moisture states for an arbitrary timber member in a natural varying climate...... the realizations were made, are based on a fully coupled transport model including a model for the influential sorption hysteresis of wood. A format containing required information suitable for assessing the “moisture” action on timber members is proposed. In addition it is illustrated how a model of high...

  1. Small wind turbines with timber blades for developing countries: Materials choice, development, installation and experiences

    DEFF Research Database (Denmark)

    Mishnaevsky, Leon; Freere, Peter; Sinha, Rakesh

    2011-01-01

    The low cost wind turbines with timber blades represent a good solution for the decentralized energy production in off-grid regions of developing countries. This paper summarizes the results of investigations on the mechanical testing and choice of timber for wind blades, testing of different...... of the blades and turbines. It was further demonstrated that the low cost wind turbines with timber blades represent a promising and viable option for the decentralized energy production in developing countries, which also opens new areas for businesses....

  2. Probabilistic Robustness Analysis of Timber Structures—Results from EU COST Action E55:WG3

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2011-01-01

    The present paper outlines results from Working Group 3 (WG3) in the EU COST Action E55—‘Modelling of the performance of timber structures’. The objectives of the project are related to the three main research activities: the identification and modelling of relevant load and environmental exposure...... scenarios, the improvement of knowledge concerning the behaviour of timber structural elements and the development of a generic framework for the assessment of the life-cycle vulnerability and robustness of timber structures....

  3. CONTRIBUTION TO THE POTENTIAL OF USING FRP MATERIALS IN THE REHABILITATION AND STABILIZATION OF TIMBERED BUILDINGS

    Directory of Open Access Journals (Sweden)

    Tomáš Čejka

    2015-12-01

    Full Text Available Wooden log, timbered perimeter and interior walls ranked among the most common building constructions used from the Early Middle Ages. In most cases, the local natural resources, i.e. wood, clay, straw and stone, were used for building houses with wooden framing. This article outlines typical defects and failures of timbered houses, “classic” techniques for the rehabilitation of these defects and failures indicating the potential of using composite materials based on high- strength fibres and epoxy resin in the rehabilitation and strengthening of timbered buildings.

  4. Productivity assessment of timber harvesting techniques for supporting sustainable forest management of secondary Atlantic Forests in southern Brazil

    Directory of Open Access Journals (Sweden)

    Pedro Caldas Britto

    2017-12-01

    Full Text Available The Atlantic Forest in southern Brazil has been subject to overexploitation in the past prompting the formulation of a rigorous conservation orientated policy by the government including a strict ban of timber harvesting. In the region, the forestland is owned by farmers. The economic value of the forest is rather limited for those farmers, because of the prohibition of commercial timber harvesting as a source of income. Sustainable forest management systems can offer great potential as new income opportunities for land holders, and further actively support the process of ecosystem rehabilitation and protection for these ecosystems. Yet, successful implementation of such sustainable management systems requires feasible and adapted timber harvesting systems. In order to develop such harvesting systems, a regional comparative case study was conducted at a typical smallholder forestry venture with the objective to analyze and evaluate harvesting methods supporting sustainable management of the Atlantic Forest. This study assessed production rates and associated costs of a common conventional timber harvesting method (CM and a proposed alternative method (AM. CM was performed by a selected, typical forest landowner who had only basic training in chainsaw operations, but 20 years of experience at the wood yard of his small sawmill. In contrast, the AM employed a professional chainsaw operator from the Amazon forest, trained and experienced in reduced impact logging techniques using state of the art equipment, supplemented by a snatch block and a skidding cone for improved extraction. Time study based models identified tree volume, winching distance and skidding distance to the landing as the most significant independent variables affecting productivity. Total net productivity ranged from 4.9 m³ PMH0-1 for CM to 3.1 m³ PMH0-1 for AM. Corresponding gross-productivity ranged from 3.0 m³ SMH-1 to 1.9 m³ SMH-1 with an overall mean utilization rate of

  5. Quality of Pinus elliottii sawn timber from tapped forests

    Directory of Open Access Journals (Sweden)

    Pedro Henrique Gonzalez de Cademartori

    2012-12-01

    Full Text Available This study aimed to characterize the quality of Pinus elliottii sawn timber extracted from tapped forests and processed in a sawmill in São José do Norte (RS. Four butt logs and four upper logs for each of the three existing diameter grades were selected and sawed. The wood pieces were analyzed after sawing and after kiln drying. The presence of knots, which occurred due to the absence of forest management and influenced the qualitative classification of the wood pieces, was observed mainly in the samples from upper logs. The process of resin tapping contributed to a higher incidence of resin pockets in the samples from butt logs, also influencing the qualitative classification of the samples. The appearance of drying defects did not modify the classification of the wood samples from butt and upper logs.

  6. Creep Properties of Walikukun (Schouthenia ovata Timber Beams

    Directory of Open Access Journals (Sweden)

    Ali Awaludin

    2016-09-01

    Full Text Available This study presents an evaluation of creep constants of Walikukun (Schoutheniaovata timber beams when rheological model of four solid elements, which is obtained byassembling Kelvin and Maxwell bodies in parallel configuration, was adopted. Creep behaviorobtained by this method was further discussed and compared with creep behavior developedusing phenomenological model of the previous study. Creep data of previous study was deformationmeasurement of Walikukun beams having cross-section of 15 mm by 20 mm with a clearspan of 550 mm loaded for three weeks period under two different room conditions: with andwithout Air Conditioner. Creep behavior given by both four solid elements model and phenomenological(in this case are power functions had good agreement during the period of creepmeasurement, but they give different prediction of creep factor beyond this period. The powerfunction of phenomenological model could give a reasonable creep prediction, while for the foursolid elements model a necessary modification is required to adjust its long-term creep behavior.

  7. Sertifikat Lestari PT. Diamond Raya Timber: Aset atau Beban?

    Directory of Open Access Journals (Sweden)

    Ahmad Maryudi

    2007-01-01

    Several environmental non-government organizations and green parties pursue various strategies to promote sustainable management of forest resource. Due to the increasing environment awareness of some segments of timber users, they have established a certification body and developed a set of criteria and indicators, against which the performance of participating forest companies will be assessed. Early experiences in Indonesia showed that certification received warm welcome from several forest companies, as there is no question that they saw the attraction of being certified. However, it appears that their enthusiasm was dampened by the experience of a certified company. Certification might have been seen as more of a liability than an asset as the economic benefits from market access became less clear, while the costs became more apparent. The use of rigid standards might result in “negative” responses from forest companies. More proactive approaches might encourage the companies to join certification.

  8. Market chain analysis of candeia timber (Eremanthus erythropappus

    Directory of Open Access Journals (Sweden)

    José Fábio Camolesi

    2009-09-01

    Full Text Available This study characterized and analysed the market chain of candeia timber intended for oil production, and estimatedthe marketing margin retained by each chain participant. The study site encompassed two regions of Minas Gerais state whosedistinctive mark is great abundance of native candeia forest (Eremanthus erythropappus. Data were collected through interviewswith rural workers, candeia woodland owners and manufacturers of candeia oil and alpha-bisabolol. The marketing margin wascomputed as the percentage retained by each chain participant on each kilo of alpha-bisabolol sold. It was concluded that alphabisabololdistributors are the participants reaping the greatest marketing margin, and also that rural producers should sell candeiatimber directly to oil manufacturers, with no middlemen wholesalers, in order to boost their marketing margin.

  9. [(≡SiO)TaV (=CH2)Cl2], the first tantalum methylidene species prepared and identified on the silica surface

    KAUST Repository

    Chen, Yin

    2013-11-01

    A novel surface tantalum methylidene [(≡SiO)TaV (=CH 2)Cl2] was obtained via thermal decomposition of the well-defined surface species [(≡SiO)TaVCl2Me 2]. This first surface tantalum methylidene ever synthesized has been fully characterized and the kinetics of the a-hydrogen abstraction reaction has also been investigated in the heterogeneous system. © 2013 Elsevier B.V. All rights reserved.

  10. [(≡SiO)TaV (=CH2)Cl2], the first tantalum methylidene species prepared and identified on the silica surface

    KAUST Repository

    Chen, Yin; Callens, Emmanuel; Abou-Hamad, Edy; Basset, Jean-Marie

    2013-01-01

    A novel surface tantalum methylidene [(≡SiO)TaV (=CH 2)Cl2] was obtained via thermal decomposition of the well-defined surface species [(≡SiO)TaVCl2Me 2]. This first surface tantalum methylidene ever synthesized has been fully characterized and the kinetics of the a-hydrogen abstraction reaction has also been investigated in the heterogeneous system. © 2013 Elsevier B.V. All rights reserved.

  11. Treatment of timber products with gaseous borate esters, Part 1: factors influencing the treatment process

    CSIR Research Space (South Africa)

    Turner, P

    1995-08-01

    Full Text Available Several factors which influence the treatment of timber products with vapour phase preservatives such as borate esters are considered. Gas flow rate through the substrate was found to be a significant factor limiting both preservative penetration...

  12. Physiology and silviculture of black walnut for combined timber and nut production

    Science.gov (United States)

    J. W. Van Sambeek; George Rink

    1981-01-01

    Research literature was reviewed for evidence supporting the management of black walnut plantations for combined timber and nut production. The silviculture of the species is discussed in relation to dual cropping. Stimulation and phenology of flowering and fruiting are reviewed.

  13. Draft Genome Sequence of Clostridium mangenotii TR, Isolated from the Fecal Material of a Timber Rattlesnake

    Science.gov (United States)

    Cochran, Philip A.; Dowd, Scot E.; Andersen, Kylie; Anderson, Nichole; Brennan, Rachel; Brook, Nicole; Callaway, Tracie; Diamante, Kimberly; Duberstine, Annie; Fitch, Karla; Freiheit, Heidi; Godlewski, Chantel; Gorman, Kelly; Haubrich, Mark; Hernandez, Mercedes; Hirtreiter, Amber; Ivanoski, Beth; Jaminet, Xochitl; Kirkpatrick, Travis; Kratowicz, Jennifer; Latus, Casey; Leable, Tiegen; Lingafelt, Nicole; Lowe, DeAnna; Lowrance, Holly; Malsack, Latiffa; Mazurkiewicz, Julie; Merlos, Persida; Messley, Jamie; Montemurro, Dawn; Nakitare, Samora; Nelson, Christine; Nye, Amber; Pazera, Valerie; Pierangeli, Gina; Rellora, Ashley; Reyes, Angelica; Roberts, Jennifer; Robins, Shadara; Robinson, Jeshannah; Schultz, Alissa; Seifert, Sara; Sigler, Elona; Spangler, Julie; Swift, Ebony; TenCate, Rebecca; Thurber, Jessica; Vallee, Kristin; Wamboldt, Jennifer; Whitten, Shannon; Woods, De’andrea; Wright, Amanda; Yankunas, Darin

    2014-01-01

    Here, we report the draft genome sequence of Clostridium mangenotii strain TR, which was isolated from the fecal material of a timber rattlesnake. This bacterium is nonpathogenic but contains 68 genes involved in virulence, disease, and defense. PMID:24407632

  14. 78 FR 73818 - Information Collection; Timber Sale Contract Operations and Administration

    Science.gov (United States)

    2013-12-09

    .... Forest Service officers collect the information from contractors who may be individuals, private sector... timber and other forest products, in order to: (1) Plan and schedule contract administration workloads...

  15. Socio-economic factors influencing marketing of non-timber forest ...

    African Journals Online (AJOL)

    Socio-economic factors influencing marketing of non-timber forest products in ... enhance skills for product transformation, build innovative storage facilities, and ... the process of domestication and integration in traditional land-use systems.

  16. The study of carrying capacity of timber slabs with use the finite elements method

    Directory of Open Access Journals (Sweden)

    Demeshok Vitalii

    2017-01-01

    Full Text Available In the article, the results of the study of behavior of timber slab under influence of fire with the standard “time-temperature” curve are presented. The finite element method was used for it. For the calculation we constructed a grid models of timber slabs. As a result of solution of the thermal problem was obtained temperature distribution and the graphs of maximum deflection of timber slabs and its slew rate depending on the time of the test. The obtained graphs allow to obtain data on the occurrence of the limit state of loss of bearing capacity by comparing current values of displacements and velocities with the maximum allowable. Analysis of the graphs shows that the criteria limit state of loss of bearing capacity does not occur. Calculation method of evaluating the fire resistance of timber slabs was developed. For it use database about strain-stress state of this slabs in conditions of influence of the fire.

  17. ECOLOGY OF CICONIIFORMES BIRDS IN FORESTS OF CRIMEA TIMBER ENTERPRISE OF KRASNODAR TERRITORY

    Directory of Open Access Journals (Sweden)

    A. A. GOJKO

    2010-01-01

    Full Text Available Features of ecology ciconiiformes birds in the conditions of plantings of the Crimean timber enterprise of Krasnodar territory are considered. Biotopes, number, phenology, nested ecology and feed of birds are analyzed.

  18. Stages of growth theory and money flows from commercial banks in timber-dependent communities.

    Science.gov (United States)

    Con H. Schallau

    1980-01-01

    The flow of funds from commercial banks in western Oregon may indicate how a timber shortfall will affect community stability. Results suggest the inappropriateness of a single public forest management policy.

  19. 36 CFR 223.201 - Limitations on unprocessed timber harvested in Alaska.

    Science.gov (United States)

    2010-07-01

    ... Conservation and Shortage Relief Act of 1990 Program § 223.201 Limitations on unprocessed timber harvested in... or serious deterioration of logs unsalable locally because of an unforeseen loss of market, (c...

  20. On the use of NDT Data for Reliability-Based Assessment of Existing Timber Structures

    DEFF Research Database (Denmark)

    Sousa, Hélder S.; Sørensen, John Dalsgaard; Kirkegaard, Poul Henning

    2013-01-01

    The objective of this paper is to address the possibilities of using non-destructive testing (NDT) data for updating information and obtaining adequate characterization of the reliability level of existing timber structures and, also, for assessing the evolution in time of performance...... of these structures when exposed to deterioration. By improving the knowledge upon the mechanical properties of timber, better and more substantiated decisions after a reliability safety assessment are aimed at. Bayesian methods are used to update the mechanical properties of timber and reliability assessment......, and information of NDT is also used to calibrate these models. The proposed approach is used for reliability assessment of different structural timber systems. Reliability of the structural system is assessed regarding the failure consequences of individual elements defined as key elements which were determined...

  1. Topology Optimization and Robotic Fabrication of Advanced Timber Space-frame Structures

    DEFF Research Database (Denmark)

    Søndergaard, Asbjørn; Amir, Oded; Eversmann, Phillip

    2016-01-01

    This paper presents a novel method for integrated topology optimization and fabrication of advanced timber space-frame structures. The method, developed in research collaboration between ETH Zürich, Aarhus School of Architecture and Israel Institute of Technology, entails the coupling of truss...... processes solving timber joint intersections, robotically controlling member prefabrication, and spatial robotic assembly of the optimized timber structures. The implication of this concept is studied through pilot fabrication and load-testing of a full scale prototype structure.......-based topology optimization with digital procedures for rationalization and robotic assembly of bespoke timber members, through a procedural, cross-application workflow. Through this, a direct chaining of optimization and robotic fabrication is established, in which optimization data is driving subsequent...

  2. 50 CFR 36.15 - Subsistence uses of timber and plant material.

    Science.gov (United States)

    2010-10-01

    ... appropriate subsistence uses, such as firewood or house logs, may be permitted in Alaska National Wildlife... timber for firewood, shall be allowed without a permit. (c)(1) Notwithstanding any other provision of...

  3. A view from the top: US enrichment Corp.'s William H. Timbers, Jr

    International Nuclear Information System (INIS)

    Giltenan, E.

    1993-01-01

    Nick Timbers took over as the first Transition Manager of the US Enrichment Corporation upon its founding last July 1st. Although USEC is not involved in negotiating the HEU deal, the fledgling company will be in charge of actually buying and selling the resulting LEU. Whenever the deal is finally signed. After the politics and haggling are over, it will be up to Nick Timbers to make the deal work on the global uranium market. The view from USEC is resolute. No matter what shape the final HEU deal takes, Nick Timbers promises that USEC will remain a competitive supplier of enrichment services. Timbers pledges that any extra costs associated with the HEU deal will not be passed on to customers. He took time out from his recent busy schedule to share his thoughts on HEU and its aftermath

  4. Components interaction in timber framed masonry structures subjected to lateral forces

    Directory of Open Access Journals (Sweden)

    Andreea DUTU

    2012-07-01

    Full Text Available Structures with timber framed masonry represent a special typology that is frequently found in Europe and other countries of the world. They are traditional buildings, non-engineered, which showed an unexpected redundancy during earthquakes where reinforced concrete buildings (improperly constructed collapsed. In the paper, aspects regarding the interaction between timber elements and masonry are mainly addressed, that were observed both in experimental studies, but also in the in situ seismic behavior of this type of structure during important earthquakes.

  5. Modelling the potential consequences of future worldwide biomass energy demand for the french forests and timber

    International Nuclear Information System (INIS)

    Buongiorno, Joseph; Raunikar, Ronald; Zhu, Shushuai

    2011-01-01

    This article describes an investigation conducted, using a world model for the forestry and forest-based industries, on the effects of the current unpredictable changes in worldwide demand for biomass energy on this sector in France. Two contrasting scenarios are tested. The results are commented and the potential conflict between various would uses - workable timber, industrial timber and dendro-energy - is underscored. (authors)

  6. Mexican oaks as a potential non-timber resource for Kombucha beverages

    OpenAIRE

    Vázquez-Cabral, Blanca D.; Moreno-Jiménez, Martha R.; Rocha-Guzmán, Nuria E.; Gallegos-Infante, José A.; González-Herrera, Silvia M.; Gamboa-Gómez, Claudia I.; González-Laredo, Rubén F.

    2016-01-01

    Abstract: Oaks (Quercus spp.) are some of the world's most important and abundant trees in nearly all temperate forests of the northern hemisphere. There are two diversity centers for this genus: one is in Southeast Asia, and the other is in Mexico. Studies on the use of oak have mainly highlighted its timber applications. However, its non-timber value is still unappreciated. Ethnobotanical tradition shows infusions from Quercus leaves, alone or in combination with other plants, which have an...

  7. Engineering evaluation of 55-year-old timber columns recycled from an industrial military building

    Science.gov (United States)

    Robert H. Falk; David Green; Douglas Rammer; Scott F. Lantz

    2000-01-01

    A large sample of timber was collected from a 548,000-ft.2 (50,900-m2) World War II era industrial military building containing approximately 1, 875,000 board feet (4,400 m3) of lumber and timber. Sixty 12-foot- (3.6-m-) long, nominal 8- by 8-inches (190-by 190-mm) Douglas-fir columns were tested at the USDA Forest Service, Forest Products Laboratory, and the results...

  8. Assessing the Sustainability of EU Timber Consumption Trends: Comparing Consumption Scenarios with a Safe Operating Space Scenario for Global and EU Timber Supply

    Directory of Open Access Journals (Sweden)

    Meghan O’Brien

    2017-12-01

    Full Text Available The growing demand for wood to meet EU renewable energy targets has increasingly come under scrutiny for potentially increasing EU import dependence and inducing land use change abroad, with associated impacts on the climate and biodiversity. This article builds on research accounting for levels of primary timber consumption—e.g., toward forest footprints—and developing reference values for benchmarking sustainability—e.g., toward land use targets—in order to improve systemic monitoring of timber and forest use. Specifically, it looks at future trends to assess how current EU policy may impact forests at an EU and global scale. Future demand scenarios are based on projections derived and adapted from the literature to depict developments under different scenario assumptions. Results reveal that by 2030, EU consumption levels on a per capita basis are estimated to be increasingly disproportionate compared to the rest of the world. EU consumption scenarios based on meeting around a 40% share of the EU renewable energy targets with timber would overshoot both the EU and global reference value range for sustainable supply capacities in 2030. Overall, findings support literature pointing to an increased risk of problem shifting relating to both how much and where timber needed for meeting renewable energy targets is sourced. It is argued that a sustainable level of timber consumption should be characterized by balance between supply (what the forest can provide on a sustainable basis and demand (how much is used on a per capita basis, considering the concept of fair shares. To this end, future research should close data gaps, increase methodological robustness and address the socio-political legitimacy of the safe operating space concept towards targets in the future. A re-use of timber within the economy should be supported to increase supply options.

  9. Innovative Use and Characterization of Polymers for Timber-Related Construction

    Directory of Open Access Journals (Sweden)

    Mark Evernden

    2010-02-01

    Full Text Available Timber gridshells have become a very popular, efficient, sustainable and beautiful structural application of timber. However, given the slender laths involved in this form of construction, there is concern over the durability of timber for this purpose, and Glass FRP (GFRP laths have been proposed as a possible substitution. This paper considers this possibility. It goes on to look at the possible use of Basalt FRP (BFRP for the same purpose, from the perspective of its creep characteristics. It is shown that the use of GFRP gridshells is a viable form of construction, and that enhanced durability characteristics of BFRP could lead to their adoption for gridshells, given that the creep characteristics of basalt fibres presented here are comparable to those of glass fibres. An altogether different form of timber construction is that of joist-and-floorboard. In the UK, there are thousands of historic buildings which use this floor construction, and a sizeable proportion of this building stock now requires upgrade, strengthening and/or stiffening to allow these buildings to be fit for purpose into the future. This paper goes on to consider the possible use of Carbon FRP (CFRP to strengthen and stiffen such timber floors. It is shown that such strengthening and stiffening is entirely feasible, offering the potential for greatly enhanced stiffness, in particular. Further, it is shown that mechanical shear connection between CFRP and timber is best conducted using perpendicular-positioned screws, rather than raked screws.

  10. Innovative Use and Characterization of Polymers for Timber-Related Construction

    Science.gov (United States)

    Darby, Antony; Ibell, Tim; Evernden, Mark

    2010-01-01

    Timber gridshells have become a very popular, efficient, sustainable and beautiful structural application of timber. However, given the slender laths involved in this form of construction, there is concern over the durability of timber for this purpose, and Glass FRP (GFRP) laths have been proposed as a possible substitution. This paper considers this possibility. It goes on to look at the possible use of Basalt FRP (BFRP) for the same purpose, from the perspective of its creep characteristics. It is shown that the use of GFRP gridshells is a viable form of construction, and that enhanced durability characteristics of BFRP could lead to their adoption for gridshells, given that the creep characteristics of basalt fibres presented here are comparable to those of glass fibres. An altogether different form of timber construction is that of joist-and-floorboard. In the UK, there are thousands of historic buildings which use this floor construction, and a sizeable proportion of this building stock now requires upgrade, strengthening and/or stiffening to allow these buildings to be fit for purpose into the future. This paper goes on to consider the possible use of Carbon FRP (CFRP) to strengthen and stiffen such timber floors. It is shown that such strengthening and stiffening is entirely feasible, offering the potential for greatly enhanced stiffness, in particular. Further, it is shown that mechanical shear connection between CFRP and timber is best conducted using perpendicular-positioned screws, rather than raked screws.

  11. Influence of steaming on drying quality and colour of beech timber

    Directory of Open Access Journals (Sweden)

    Milić Goran

    2015-01-01

    Full Text Available This paper presents the results of an analysis of influence of the “light” steaming process on conventional drying and colour of beech timber. A stack consisting of steamed and unsteamed boards was dried. Moisture content and moisture content profiles were recorded, and at the end of drying final moisture content, moisture content difference across thickness, case-hardening and colour were determinated. No statistically significant difference between steamed and unsteamed timber was established in any of the examined parameters (MC, ΔMC, gap. The results indicate that equal (or even better drying quality can be expected with steamed beech timber than with unsteamed timber, given the same drying schedule. Dry steamed timber was darker and more reddish than the unsteamed one. An imprecision of measurement by probes in the kiln was noticed in measuring steamed and unsteamed beech timber having a moisture content of between 7% and 15%, and a solution for overcoming this problem was given. [Projekat Ministarstva nauke Republike Srbije, br. TR 31041

  12. Mushrooms, trees, and money: value estimates of commercial mushrooms and timber in the pacific northwest.

    Science.gov (United States)

    Alexander, Susan J; Pilz, David; Weber, Nancy S; Brown, Ed; Rockwell, Victoria A

    2002-07-01

    Wild edible mushrooms are harvested in the forests of the Pacific Northwest, where both trees and mushrooms grow in the same landscape. Although there has been some discussion about the value of trees and mushrooms individually, little information exists about the joint production of, and value for, these two forest products. Through four case studies, the information needed to determine production and value for three wild mushroom species in different forests of the Pacific Northwest is described, and present values for several different forest management scenarios are presented. The values for timber and for mushrooms are site- and species-specific. On the Olympic Peninsula in Washington, timber is highly valued and chanterelles are a low-value product by weight; timber has a soil expectation value (SEV) 12 to 200 times higher than chanterelles. In south-central Oregon, timber and American matsutake mushrooms have the potential to have about the same SEV. In eastern Oregon, timber is worth 20 to 110 times as much as the morels that grow in the forest. Production economics is concerned with choices about how much and what to produce with what resources. The choices are influenced by changes in technical and economic circumstances. Through our description and analysis of the necessary definitions and assumptions to assess value in joint production of timber and wild mushrooms, we found that values are sensitive to assumptions about changes in forest management, yields for mushrooms and trees, and costs.

  13. Development of a novel test-setup for identifying the frictional characteristics of carbon fibre reinforced polymer composites at high surface pressure

    Science.gov (United States)

    Saxena, Prateek; Schinzel, Marie; Andrich, Manuela; Modler, Niels

    2016-09-01

    Carbon fibre reinforced polymer composites are extensively used in industrial applications. They are light in weight and have excellent load bearing properties. To understand this material's behaviour when carrying loads at high pressure, a tensile-friction test device was developed that can apply a contact surface pressure between composite and counterpart of 50-300 MPa. A tribological investigation of carbon fibre reinforced epoxy composites was carried out, in which the influence of the surface morphology was investigated by using grinding and sandblasting techniques. The friction coefficient of the polymer composite was measured at 100 MPa surface pressure against uncoated and Diamond-Like Carbon coated stainless steel counterparts.

  14. Implementation of fully coupled heat and mass transport model to determine the behaviour of timber elements in fire

    DEFF Research Database (Denmark)

    Pečenko, Robert; Huč, Sabina; Turk, Goran

    2014-01-01

    In this paper we present results of numerical analysis of timber beam exposed to fire. The numerical procedure is divided into two physically separated but closely related phases. In the first phase coupled problem of moisture and heat transfer over the timber beam is numerically solved using...... the enhanced finite element method. The results of the first computational stage were used as the input data for the numerical analysis of mechanical response of timber element....

  15. Temporal Decay in Timber Species Composition and Value in Amazonian Logging Concessions.

    Science.gov (United States)

    Richardson, Vanessa A; Peres, Carlos A

    2016-01-01

    Throughout human history, slow-renewal biological resource populations have been predictably overexploited, often to the point of economic extinction. We assess whether and how this has occurred with timber resources in the Brazilian Amazon. The asynchronous advance of industrial-scale logging frontiers has left regional-scale forest landscapes with varying histories of logging. Initial harvests in unlogged forests can be highly selective, targeting slow-growing, high-grade, shade-tolerant hardwood species, while later harvests tend to focus on fast-growing, light-wooded, long-lived pioneer trees. Brazil accounts for 85% of all native neotropical forest roundlog production, and the State of Pará for almost half of all timber production in Brazilian Amazonia, the largest old-growth tropical timber reserve controlled by any country. Yet the degree to which timber harvests beyond the first-cut can be financially profitable or demographically sustainable remains poorly understood. Here, we use data on legally planned logging of ~17.3 million cubic meters of timber across 314 species extracted from 824 authorized harvest areas in private and community-owned forests, 446 of which reported volumetric composition data by timber species. We document patterns of timber extraction by volume, species composition, and monetary value along aging eastern Amazonian logging frontiers, which are then explained on the basis of historical and environmental variables. Generalized linear models indicate that relatively recent logging operations farthest from heavy-traffic roads are the most selective, concentrating gross revenues on few high-value species. We find no evidence that the post-logging timber species composition and total value of forest stands recovers beyond the first-cut, suggesting that the commercially most valuable timber species become predictably rare or economically extinct in old logging frontiers. In avoiding even more destructive land-use patterns, managing

  16. Metabolic chemotypes of CITES protected Dalbergia timbers from Africa, Madagascar, and Asia.

    Science.gov (United States)

    McClure, Pamela J; Chavarria, Gabriela D; Espinoza, Edgard

    2015-05-15

    The genus Dalbergia includes approximately 250 species worldwide. Of these, 58 species are of economic importance and listed under CITES. Identification of illegal transnational timber trade is a challenge because logs or boards lack the typical descriptors used for species identification such as leaves and flowers; therefore, frequently the lowest taxonomic determination of these tree byproducts is genus. In this study, we explore the use of Direct Analysis in Real Time (DART) Time-Of-Flight Mass Spectrometry (TOFMS) in making species determinations of protected Dalbergia trees from Africa, Madagascar, and Asia. Metabolic profiles were collected using DART TOFMS from the heartwood of seven species and the sapwood of 17 species of Dalbergia. Also included in this study are 85 Dalbergia heartwood samples from Madagascar that were only identified to genus. In all, 21 species comprising 235 specimens were analyzed, the metabolic chemotypes were interpreted, and the spectra were analyzed using chemometric tools. Dalbergia cochinchinensis and Dalbergia spp. from Madagascar (both CITES Appendix II) could be differentiated from each other and from the non-protected Dalbergia latifolia and Dalbergia melanoxylon. DART TOFMS is a valuable high-throughput tool useful for making phytochemical classifications of Dalbergia spp. The data produced allows the protected Dalbergias from Madagascar to be distinguished and can differentiate closely related rosewood trees. Published in 2015. This article is a U.S. Government work and is in the public domain in the USA.

  17. Benefits of Biotic Pollination for Non-Timber Forest Products and Cultivated Plants

    Directory of Open Access Journals (Sweden)

    Rehel Shiny

    2009-01-01

    Full Text Available Biodiversity supplies multiple goods and services to society and is critical for the support of livelihoods across the globe. Many indigenous people depend upon non-timber forest products (NTFP and crops for a range of goods including food, medicine, fibre and construction materials. However, the dependency of these products on biotic pollination services is poorly understood. We used the biologically and culturally diverse Nilgiri Biosphere Reserve in India to characterise the types of NTFP and crop products of 213 plant species and asses their degree of dependency on animal pollination. We found that 80 per cent of all species benefited from animal pollination in their reproduction, and that 62 per cent of crop products and 40 per cent of NTFP benefited from biotic pollination in their production. Further we identified the likely pollinating taxa documented as responsible for the production of these products, mainly bees and other insects. A lower proportion of indigenous plant products (39 per cent benefited from biotic pollination than products from introduced plants (61 per cent. We conclude that pollinators play an important role in the livelihoods of people in this region.

  18. Efficiency and precision for estimating timber and non-timber attributes using Landsat-based stratification methods in two-phase sampling in northwest California

    Science.gov (United States)

    Antti T. Kaartinen; Jeremy S. Fried; Paul A. Dunham

    2002-01-01

    Three Landsat TM-based GIS layers were evaluated as alternatives to conventional, photointerpretation-based stratification of FIA field plots. Estimates for timberland area, timber volume, and volume of down wood were calculated for California's North Coast Survey Unit of 2.5 million hectares. The estimates were compared on the basis of standard errors,...

  19. Projections of the U.S. timber supply and demand situation to 2050 : draft findings from the USDA Forest Service 2000 RPA Timber Assessment.

    Science.gov (United States)

    Richard Haynes; Darius Adams; Ralph Alig; David Brooks; Irene Durbak; James Howard; Peter Ince; David McKeever; John Mills; Ken Skog; Xiaoping. Zhou

    2001-01-01

    The Draft RPA Timber Assessment projects, over the next 50 years, the likelihood of increasing abundance of softwoods in the South and decreasing abundance of hardwoods in the South. These trends in supply, along with projected contributions from the North and West, imply U.S. consumption needs could be met without increasing net product imports and would not increase...

  20. CONTEMPORARY CONSTRUCTIONS OF TIMBER PASSIVE HOUSES IN SLOVENIA

    Directory of Open Access Journals (Sweden)

    Manja Kitek Kuzman

    2013-12-01

    Full Text Available Energy efficiency is essential in the efforts to achieve a 20% reduction of primary power consumption by 2020. It is widely recognized that the potential of energy saving in buildings is large. Considering the tendencies of energy production and price, it is becoming urgent to reduce energy consumption in buildings. The choice of materials for a building with a high energy efficiency becomes much more important and strategies for reducing the use of primary energy for the production of materials and components becomes key. Renewable building materials should already be integrated into the early phases of building planning. The positive trend towards wooden construction is dictated by international guidelines, where a wooden building is an important starting point, not only for low-energy, but also lowemission building with exceptional health and safety aspects. In Europe, the most comprehensive and widely used is a concept of ultralow energy house, more precisely, the passive house concept. Most Slovenian buildings combine contemporary styling with a degree of energy efficiency that comes close to passive house standards. It is widely recognized that the Slovenian construction industry is relatively advanced in the field of low energy buildings. In the light of the growing importance of energy-efficient building methods, it could be said that timber passive house would play an increasingly important role in the future.

  1. Global timber investments, wood costs, regulation, and risk

    International Nuclear Information System (INIS)

    Cubbage, Frederick; Koesbandana, Sadharga; Gonzalez, Ronalds; Carrero, Omar; MacIntyre, Charles; Abt, Robert; Phillips, Richard; Mac Donagh, Patricio; Rubilar, Rafael; Balmelli, Gustavo; Olmos, Virginia Morales; De La Torre, Rafael; Murara, Mauro; Hoeflich, Vitor Afonso; Kotze, Heynz; Frey, Gregory; Adams, Thomas; Turner, James; Lord, Roger; Huang, Jin; McGinley, Kathleen

    2010-01-01

    We estimated financial returns and wood production costs in 2008 for the primary timber plantation species. Excluding land costs, returns for exotic plantations in almost all of South America - Brazil, Argentina, Uruguay, Chile, Colombia, Venezuela, and Paraguay - were substantial. Eucalyptus species returns were generally greater than those for Pinus species in each country, with most having Internal Rates of Return (IRRs) of 20% per year or more, as did teak. Pinus species in South America were generally closer to 15%, except in Argentina, where they were 20%. IRRs were less, but still attractive for plantations of coniferous or deciduous species in China, South Africa, New Zealand, Indonesia, and the United States, ranging from 7% to 12%. Costs of wood production at the cost of capital of 8% per year were generally cheapest for countries with high rates of return and for pulpwood fiber production, which would favor vertically integrated firms in Latin America. But wood costs at stumpage market prices were much greater, making net wood costs for open market wood more similar among countries. In the Americas, Chile and Brazil had the most regulatory components of sustainable forest management, followed by Misiones, Argentina and Oregon in the U.S. New Zealand, the United States, and Chile had the best rankings regarding risk from political, commercial, war, or government actions and for the ease of doing business. Conversely, Venezuela, Indonesia, Colombia, and Argentina had high risk ratings, and Brazil, Indonesia, and Venezuela were ranked as more difficult countries for ease of business. (author)

  2. Global timber investments, wood costs, regulation, and risk

    Energy Technology Data Exchange (ETDEWEB)

    Cubbage, Frederick; Koesbandana, Sadharga; Gonzalez, Ronalds; Carrero, Omar; MacIntyre, Charles; Abt, Robert; Phillips, Richard [Forestry and Environmental Resources, North Carolina State University, Raleigh, NC (United States); Mac Donagh, Patricio [Universidad Nacional de Misiones (UNAM), Lisandro de la Torre s/n, CP 3380, Eldorado, Misiones (Argentina); Rubilar, Rafael [Universidad de Concepcion, Victoria 631, Casilla 160-C - Correo 3, Concepcion (Chile); Balmelli, Gustavo [Instituto Nacional de Investigacion Agropecuria, INIA Tacuarembo, Ruta 5, Km 386, Tacuarembo (Uruguay); Olmos, Virginia Morales [Weyerhaeuser Company, La Rosa 765, Melo (Uruguay); De La Torre, Rafael [CellFor, 247 Davis Street, Athens, GA (United States); Murara, Mauro [Universidade do Contestado, R. Joaquim Nabuco, 314 Bairro Cidade Nova, Porto Uniao, Santa Catarina (Brazil); Hoeflich, Vitor Afonso [Universidade Federal do Parana, Av. Pref. Lothario Meissner, 900, 80210-170, Jardim Botanico, Curitiba, Parana (Brazil); Kotze, Heynz [Komatiland Forests (Pty) Ltd, P.O. Box 14228, Nelspruit (South Africa); Frey, Gregory [World Bank, 1818 H. Street NW, Washington, DC (United States); Adams, Thomas; Turner, James [New Zealand Forest Research Institute Ltd., Scion, 49 Sala St., Rotorua (New Zealand); Lord, Roger [Mason, Bruce, and Girard, Inc., 707 SW Washington St., Portland, Oregon (United States); Huang, Jin [Abt Associates, 4550 Montgomery Avenue, Bethesda, MD (United States); McGinley, Kathleen [International Institute of Tropical Forestry, USDA Forest Service, c/o 920 Main Campus Dr. Suite 300, Raleigh, NC (United States)

    2010-12-15

    We estimated financial returns and wood production costs in 2008 for the primary timber plantation species. Excluding land costs, returns for exotic plantations in almost all of South America - Brazil, Argentina, Uruguay, Chile, Colombia, Venezuela, and Paraguay - were substantial. Eucalyptus species returns were generally greater than those for Pinus species in each country, with most having Internal Rates of Return (IRRs) of 20% per year or more, as did teak. Pinus species in South America were generally closer to 15%, except in Argentina, where they were 20%. IRRs were less, but still attractive for plantations of coniferous or deciduous species in China, South Africa, New Zealand, Indonesia, and the United States, ranging from 7% to 12%. Costs of wood production at the cost of capital of 8% per year were generally cheapest for countries with high rates of return and for pulpwood fiber production, which would favor vertically integrated firms in Latin America. But wood costs at stumpage market prices were much greater, making net wood costs for open market wood more similar among countries. In the Americas, Chile and Brazil had the most regulatory components of sustainable forest management, followed by Misiones, Argentina and Oregon in the U.S. New Zealand, the United States, and Chile had the best rankings regarding risk from political, commercial, war, or government actions and for the ease of doing business. Conversely, Venezuela, Indonesia, Colombia, and Argentina had high risk ratings, and Brazil, Indonesia, and Venezuela were ranked as more difficult countries for ease of business. (author)

  3. Roads, interrupted dispersal, and genetic diversity in timber rattlesnakes.

    Science.gov (United States)

    Clark, Rulon W; Brown, William S; Stechert, Randy; Zamudio, Kelly R

    2010-08-01

    Anthropogenic habitat modification often creates barriers to animal movement, transforming formerly contiguous habitat into a patchwork of habitat islands with low connectivity. Roadways are a feature of most landscapes that can act as barriers or filters to migration among local populations. Even small and recently constructed roads can have a significant impact on population genetic structure of some species, but not others. We developed a research approach that combines fine-scale molecular genetics with behavioral and ecological data to understand the impacts of roads on population structure and connectivity. We used microsatellite markers to characterize genetic variation within and among populations of timber rattlesnakes (Crotalus horridus) occupying communal hibernacula (dens) in regions bisected by roadways. We examined the impact of roads on seasonal migration, genetic diversity, and gene flow among populations. Snakes in hibernacula isolated by roads had significantly lower genetic diversity and higher genetic differentiation than snakes in hibernacula in contiguous habitat. Genetic-assignment analyses revealed that interruption to seasonal migration was the mechanism underlying these patterns. Our results underscore the sizeable impact of roads on this species, despite their relatively recent construction at our study sites (7 to 10 generations of rattlesnakes), the utility of population genetics for studies of road ecology, and the need for mitigating effects of roads.

  4. Timber - Material of the Future - Examples of Small Wooden Architectural Structures

    Science.gov (United States)

    Żmijewki, Tomasz; Wojtowicz-Jankowska, Dorota

    2017-10-01

    The aim of this article is to present various types of wood-based products, classified as engineered timber, while specifying the implications of their structural properties for their forms. Timber is used as a construction material due to its fire resistance, good structural characteristics and insulating properties. The advent of new technologies of wood processing and wood-based materials production has converted timber into a high-tech material, thus encouraging the architects to consider it ever more often in their projects. As wooden technologies overcome constraints, timber begins to compete with steel and concrete. The design characteristics of new wood-based products allow wooden structures to be higher, have larger spans, and more diverse forms than ever. Wood-based materials include materials made of solid wood, veneers, strand, and wood which, due to its inferior quality, would otherwise be unfit for constructions. Elements and layers of these products are glued using different kinds of strong and water-resistant adhesives. The article presents the history of development of new wood technologies, discussing increasingly popular wood-based materials such as glued laminated timber, cross-laminated timber, or structural composite lumber. The paper analyses their technical and fire-resistance properties, and points to ecological aspect, as factors contributing to the growing popularity of these materials. Finally, the timber’s characteristics are contrasted with those of steel and concrete. The article lists examples of wooden objects representing the so-called small architecture structures from across Europe. They illustrate the potential, the uniqueness and the versatility that wood-based materials offer for constructors and architects. All these features form sufficient grounds for stating that timber truly is a construction material of the 21st century.

  5. A comparison of three terrain parameters that may be used to identify denudation surfaces within a GIS: A case study from Wales, United Kingdom

    Czech Academy of Sciences Publication Activity Database

    Rowberry, Matthew David

    2012-01-01

    Roč. 43, JUN (2012), s. 147-158 ISSN 0098-3004 Institutional research plan: CEZ:AV0Z30460519 Keywords : denudation surfaces * slope angle * relative relief Subject RIV: DB - Geology ; Mineralogy Impact factor: 1.834, year: 2012

  6. Using Raman Spectroscopy and Surface-Enhanced Raman Scattering to Identify Colorants in Art: An Experiment for an Upper-Division Chemistry Laboratory

    Science.gov (United States)

    Mayhew, Hannah E.; Frano, Kristen A.; Svoboda, Shelley A.; Wustholz, Kristin L.

    2015-01-01

    Surface-enhanced Raman scattering (SERS) studies of art represent an attractive way to introduce undergraduate students to concepts in nanoscience, vibrational spectroscopy, and instrumental analysis. Here, we present an undergraduate analytical or physical chemistry laboratory wherein a combination of normal Raman and SERS spectroscopy is used to…

  7. Reinforcement of Bolted Timber Joints Using GFRP Sheets in Poplar and Pine Woods

    Directory of Open Access Journals (Sweden)

    Mehrab Madhoushi

    2013-01-01

    Full Text Available Failure in timber structures occurs mainly in crucial points such as joints areas. Therefore, the idea of using composite sheets in timber joints has been intro-duced as a method in order to increase the strength and ductility behaviour of timber joints. This research aims to study the behaviour of bolted joints in poplar and pine woods, which are reinforced by two types of GFRP sheets. A single shear bolted joint consisted of 3 timber members whose length and width were 30 cm in length and 5 cm in width. The thickness of each member was 4 cm for internal part and 2 cm for external part. The employed steel bolt was 10 cm in length and 1 cm in diameter. In this respect, one layer of GFRP sheet was used to be bonded to timber members by using epoxy resin and left between the clamps for 24 hours. They were then kept at room temperature for three weeks. Also the effect of adding a wood veneer on the reinforced joints was investigated. The tensile strength of the reinforced and control samples (un-reinforced joints was measured according to ASTM D5652-92 standard. The results show that the reinforced samples have higher tensile strength compared to that of reinforced joints, although it is not statistically signifcant. Also, two types of sheets infuence the joint behaviour as the reinforced joints display more ductility behaviour.

  8. Encroachment Dynamics of Juniperus virginiana L. and Mesic Hardwood Species into Cross Timbers Forests of North-Central Oklahoma, USA

    Directory of Open Access Journals (Sweden)

    Daniel L. Hoff

    2018-02-01

    Full Text Available Cross Timbers forests, typically dominated by Quercus stellata Wangenh. and Q. marilandica Muenchh., are the transition zone between eastern deciduous forest and prairie in the southern Great Plains. Fire exclusion beginning in the mid-1900s has led to increasing stand density and encroachment of fire-intolerant Juniperus virginiana L. and mesic hardwood. We measured current forest structure and tree ages of 25 stands (130 plots in north-central Oklahoma to characterize the extent and dynamics of encroachment. The respective basal area and stand density of the overstory (diameter at breast height; dbh > 10 cm were 19.0 m2 ha−1 and 407 trees ha−1 with Q. stellata comprising 43% of basal area and 42% of stand density. Quercus marilandica represented only 3% of basal area and 4% of overstory density. Juniperus virginiana represented 7% of basal area and 14% of stand density while mesic hardwoods, e.g., Celtis spp., Ulmus spp., Carya spp., 33% of basal area and stand density. The sapling layer was dominated by mesic hardwoods (68% and J. virginiana (25% while the seedling layer was dominated by mesic hardwoods (74%. The majority of Quercus recruited into the overstory between 1910–1970, while recruitment of J. virginiana and mesic hardwoods began more recently (post 1950s. Growth rate, based on the relationship between age and dbh, was faster for mesic hardwoods than for J. virginiana and Q. stellata. These results indicate that removal of recurrent surface fire as a disturbance agent has significantly altered forest composition in the Cross Timbers region by allowing encroachment of J. virginiana and fire-intolerant, mesic hardwoods. This increases wildfire risk because J. virginiana is very flammable and will alter how these forests respond to future drought and other disturbance events.

  9. Preliminary ecological study of plant species of Lokame Natural Forest (Nord Ubangi Province, Democratic Republic of the Congo): A special emphasis on Non-timber Forest Products

    OpenAIRE

    Koto-te-Nyiwa Ngbolua,

    2017-01-01

    A preliminary ecological study with a special emphasis on Non-timber forest products (NTFPs) was conducted between 2014 and 2015 on both anks of Lokame River in Lokame forest. The results showed that the Lokame natural forest has a very rich and diversified in NTFPs. Data collected over a total area of 2 ha identified 20 families and 25 different plant species producing NTFPs and 914 individuals, of which 39% are food, 38% for different uses, 14% for aphrodisiacs and 9% as medicinal. A compar...

  10. Governance Options to Enhance Ecosystem Services in Cocoa, Soy, Tropical Timber and Palm Oil Value Chains.

    Science.gov (United States)

    Ingram, Verina; van den Berg, Jolanda; van Oorschot, Mark; Arets, Eric; Judge, Lucas

    2018-02-06

    Dutch policies have advocated sustainable commodity value chains, which have implications for the landscapes from which these commodities originate. This study examines governance and policy options for sustainability in terms of how ecosystem services are addressed in cocoa, soy, tropical timber and palm oil value chains with Dutch links. A range of policies addressing ecosystem services were identified, from market governance (certification, payments for ecosystem services) to multi-actor platforms (roundtables) and public governance (policies and regulations). An analysis of policy narratives and interviews identified if and how ecosystem services are addressed within value chains and policies; how the concept has been incorporated into value chain governance; and which governance options are available. The Dutch government was found to take a steering but indirect role in all the cases, primarily through supporting, financing, facilitating and partnering policies. Interventions mainly from end-of-chain stakeholders located in processing and consumption countries resulted in new market governance, notably voluntary sustainability standards. These have been successful in creating awareness of some ecosystem services and bringing stakeholders together. However, they have not fully addressed all ecosystem services or stakeholders, thus failing to increase the sustainability of value chains or of the landscapes of origin. We argue that chains sourced in tropical landscapes may be governed more effectively for sustainability if voluntary, market policy tools and governance arrangements have more integrated goals that take account of sourcing landscapes and impacts along the entire value chain. Given the international nature of these commodities. These findings have significance for debates on public-private approaches to value chain and landscape governance.

  11. 75 FR 21577 - Rogue River-Siskiyou National Forest, Powers Ranger District, Coos County, OR; Eden Ridge Timber...

    Science.gov (United States)

    2010-04-26

    ... Plan, page C-39). Specifically for the Eden Ridge Timber Sales project, Needs include: Improvement of... District, Coos County, OR; Eden Ridge Timber Sales AGENCY: Forest Service, USDA. ACTION: Notice of intent... Forest's Probable Sale Quantity. The planning area is located approximately four (4) air miles southeast...

  12. 31 CFR 593.205 - Prohibition on the importation of any round log or timber product originating in Liberia.

    Science.gov (United States)

    2010-07-01

    ... round log or timber product originating in Liberia. 593.205 Section 593.205 Money and Finance: Treasury... on the importation of any round log or timber product originating in Liberia. Except as otherwise... product originating in Liberia is prohibited. Note to § 593.205: See section 593.510, which authorizes...

  13. Timber product implications of a program of mechanical fuel treatments applied on public timberland in the Western United States

    Science.gov (United States)

    Barbour R. James.; Xiaoping Zhou; Jeffrey P. Prestemon

    2008-01-01

    This study reports the results from a 5 year simulation of forest thinning intended to reduce fire hazard on publicly managed lands in the western United States. A state simulation model of interrelated timber markets was used to evaluate the timber product outputs. Approximately 84 million acres (34 million hectares), or 66% of total timberland in the western United...

  14. Advantages of DVW reinforced moment transmitting timber joints with steel flitch plates for colum-beam application

    NARCIS (Netherlands)

    Leijten, A.J.M.; Brandon, D.; Haddad, Y.M.

    2013-01-01

    This paper presents a study into the moment-rotation aspects of dvw (densified veneer wood) reinforced timber connections with an inter-connecting flitch plate used as middle member. Previous studies showed that reinforcing dowel-type timber connections with dvw and using expanded tube fasteners

  15. Empowering Women and Ethnic Minority Groups to Collectively Market non Timber Forest Products from Community Forests in Cameroon

    NARCIS (Netherlands)

    Eijnatten, van Judith; Mala, William Armand; Ingram, V.J.; Belibi, M.B.

    2016-01-01

    Community forestry (CF) was introduced in Cameroon in 1994 as a way to reduce poverty and enhance sustainable forest management. CF activities have primarily focused on timber exploitation rather than non-timber forest product (NTFP) collection processing or marketing. The study reports on a two

  16. Condition Assessment of the Timber Structures of a Century-Old Industrial Building Using a Nondestructive Inspection Procedure

    Science.gov (United States)

    Xiping Wang; Marko Teder; James Wacker

    2013-01-01

    This paper reports an in situ inspection project conducted on heavy timber structures of a century-old industrial building at a paper manufacturing facility. A nondestructive inspection procedure was employed to evaluate the true condition of the heavy timbers that serve as the main framing structure of the building. The on-site investigation involved monitoring of the...

  17. 32 CFR 644.551 - Equal opportunity-sales of timber, embedded sand, gravel, stone, and surplus structures.

    Science.gov (United States)

    2010-07-01

    ... § 644.551 Equal opportunity—sales of timber, embedded sand, gravel, stone, and surplus structures... 32 National Defense 4 2010-07-01 2010-07-01 true Equal opportunity-sales of timber, embedded sand, gravel, stone, and surplus structures. 644.551 Section 644.551 National Defense Department of Defense...

  18. Study on the changes of properties of Myanma lesser-used timber species following gamma-irradiation

    International Nuclear Information System (INIS)

    Kaye Thwe Kywe Aye; Win Kyi; Tin Hlaing

    2001-01-01

    The proper changes of some physical properties and mechanical properties of Leza [Laderstroemra tomentofa (PREFL.)] one of Myanmar lesser-used timber species, following radiation processing with 1 Mrad gamma-radiation has been studied. It is found that some properties of Leza-timber species are significantly changed at 95 percent confidence level. (author)

  19. Connecting non-timber forest products stakeholders to information and knowledge: A case study of an Internet web site

    Science.gov (United States)

    James Chamberlain; Matt Winn; A.L. Hammett

    2009-01-01

    Many products are harvested from forests that are not timber-based but are based on plant materials. These non-timber forest products (NTFPs) have not been fully incorporated into economic development programs, yet they provide significant monetary benefits for rural entrepreneurs. Interest in NTFPs as alternative forest enterprises and sources of additional income has...

  20. 36 CFR 223.118 - Appeal process for small business timber sale set-aside program share recomputation decisions.

    Science.gov (United States)

    2010-07-01

    ... appeal: (i) The appellant's name, mailing address, and daytime telephone number; (ii) The title or type... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Appeal process for small... FOREST SYSTEM TIMBER Timber Sale Contracts Contract Administration § 223.118 Appeal process for small...

  1. 26 CFR 1.631-2 - Gain or loss upon the disposal of timber under cutting contract.

    Science.gov (United States)

    2010-04-01

    ... cutting contract. 1.631-2 Section 1.631-2 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE... loss upon the disposal of timber under cutting contract. (a) In general. (1) If an owner disposes of... deemed to be the date such timber is cut. However, if payment is made to the owner under the contract for...

  2. A Numerical Analysis of the Resistance and Stiffness of the Timber and Concrete Composite Beam

    Science.gov (United States)

    Szumigała, Ewa; Szumigała, Maciej; Polus, Łukasz

    2015-03-01

    The article presents the results of a numerical analysis of the load capacity and stiffness of the composite timber and concrete beam. Timber and concrete structures are relatively new, they have not been thoroughly tested and they are rarely used because of technological constraints. One of the obstacles to using them is difficulty with finding a method which would allow successful cooperation between concrete and timber, which has been proposed by the authors of the present article. The modern idea of sustainable construction design requires the use of new more environmentally-friendly solutions. Wood as an ecological material is easily accessible, less energy-consuming, and under certain conditions more corrosion-resistant than steel. The analysis presented in the article showed that cooperation between a wooden beam and a concrete slab on profiled steel sheeting is possible. The analysed composite beam has a greater load capacity and stiffness than the wooden beam.

  3. Managing Commercial Tree Species for Timber Production and Carbon Sequestration: Management Guidelines and Financial Returns

    Energy Technology Data Exchange (ETDEWEB)

    Gary D. Kronrad

    2006-09-19

    A carbon credit market is developing in the United States. Information is needed by buyers and sellers of carbon credits so that the market functions equitably and efficiently. Analyses have been conducted to determine the optimal forest management regime to employ for each of the major commercial tree species so that profitability of timber production only or the combination of timber production and carbon sequestration is maximized. Because the potential of a forest ecosystem to sequester carbon depends on the tree species, site quality and management regimes utilized, analyses have determined how to optimize carbon sequestration by determining how to optimally manage each species, given a range of site qualities, discount rates, prices of carbon credits and other economic variables. The effects of a carbon credit market on the method and profitability of forest management, the cost of sequestering carbon, the amount of carbon that can be sequestered, and the amount of timber products produced has been determined.

  4. A Numerical Analysis of the Resistance and Stiffness of the Timber and Concrete Composite Beam

    Directory of Open Access Journals (Sweden)

    Szumigała Ewa

    2015-03-01

    Full Text Available The article presents the results of a numerical analysis of the load capacity and stiffness of the composite timber and concrete beam. Timber and concrete structures are relatively new, they have not been thoroughly tested and they are rarely used because of technological constraints. One of the obstacles to using them is difficulty with finding a method which would allow successful cooperation between concrete and timber, which has been proposed by the authors of the present article. The modern idea of sustainable construction design requires the use of new more environmentally-friendly solutions. Wood as an ecological material is easily accessible, less energy-consuming, and under certain conditions more corrosion-resistant than steel. The analysis presented in the article showed that cooperation between a wooden beam and a concrete slab on profiled steel sheeting is possible. The analysed composite beam has a greater load capacity and stiffness than the wooden beam.

  5. Analysis and modelling composite timber-concrete systems: Design of bridge structure according to EN

    Directory of Open Access Journals (Sweden)

    Manojlović Dragan

    2016-01-01

    Full Text Available Timber-concrete composite structures are already applied more than 80 years in engineering practice, went trought the intuitive problem solution to the fully prefabricated hybride assemblies for dry building. The development path of timber-concrete composites was always followed by extensive theoretical and experimental research, whose results were successfully implemented in practice, i.e. on the market, but till presence didn't result in modern designer's code. In expectation of new European codes for timber-concrete composites, the objective of the paper is to provide a comprehensive review of available standards provisions and recent conclusions from literature. The key issues for practical design are highlighted and ilustrated on the example of glulam composite arch bridge structure with concrete deck, according the Eurocodes.

  6. Analysis of the connection of the timber-fiber concrete composite structure

    Science.gov (United States)

    Holý, Milan; Vráblík, Lukáš; Petřík, Vojtěch

    2017-09-01

    This paper deals with an implementation of the material parameters of the connection to complex models for analysis of the timber-fiber concrete composite structures. The aim of this article is to present a possible way of idealization of the continuous contact model that approximates the actual behavior of timber-fiber reinforced concrete structures. The presented model of the connection was derived from push-out shear tests. It was approved by use of the nonlinear numerical analysis, that it can be achieved a very good compliance between results of numerical simulations and results of the experiments by a suitable choice of the material parameters of the continuous contact. Finally, an application for an analytical calculation of timber-fiber concrete composite structures is developed for the practical use in engineering praxis. The input material parameters for the analytical model was received using data from experiments.

  7. 2nd International Conference on Historic Earthquake-Resistant Timber Frames in the Mediterranean Area

    CERN Document Server

    Machado, José; Costa, Alfredo; Candeias, Paulo; Ruggieri, Nicola; Catarino, José

    2016-01-01

    This book presents a selection of the best papers from the HEaRT 2015 conference, held in Lisbon, Portugal, which provided a valuable forum for engineers and architects, researchers and educators to exchange views and findings concerning the technological history, construction features and seismic behavior of historical timber-framed walls in the Mediterranean countries. The topics covered are wide ranging and include historical aspects and examples of the use of timber-framed construction systems in response to earthquakes, such as the gaiola system in Portugal and the Bourbon system in southern Italy; interpretation of the response of timber-framed walls to seismic actions based on calculations and experimental tests; assessment of the effectiveness of repair and strengthening techniques, e.g., using aramid fiber wires or sheets; and modelling analyses. In addition, on the basis of case studies, a methodology is presented that is applicable to diagnosis, strengthening and improvement of seismic performance ...

  8. A novel merozoite surface antigen of Plasmodium falciparum (MSP-3 identified by cellular-antibody cooperative mechanism antigenicity and biological activity of antibodies

    Directory of Open Access Journals (Sweden)

    Claude Oeuvray

    1994-01-01

    Full Text Available We report the identification of a 48kDa antigen targeted by antibodies which inhibit Plasmodium falciparum in vitro growth by cooperation with blood monocytes in an ADCI assay correlated to the naturally acquired protection. This protein is located on the surface of the merozoite stage of P. falciparum, and is detectable in all isolates tested. Epidemiological studies demonstrated that peptides derived from the amino acid sequence of MSP-3 contain potent B and T-cell epitopes recognized by a majority of individuals living in endemic areas. Moreover human antibodies either purified on the recombinant protein, or on the synthetic peptide MSP-3b, as well as antibodies raised in mice, were all found to promote parasite killing mediated by monocytes.

  9. Forest biomass flow for fuel wood, fodder and timber security among tribal communities of Jharkhand.

    Science.gov (United States)

    Islam, M A; Quli, S M S; Rai, R; Ali, Angrej; Gangoo, S A

    2015-01-01

    The study investigated extraction and consumption pattern of fuel wood, fodder and timber and forest biomass flow for fuel wood, fodder and timber security among tribal communities in Bundu block of Ranchi district in Jharkhand (India). The study is based on personal interviews of the selected respondents through structured interview schedule, personal observations and participatory rural appraisal tools i.e. key informant interviews and focus group discussions carried out in the sample villages, using multi-stage random sampling technique. The study revealed that the total extraction of fuel wood from different sources in villages was 2978.40 tons annum(-1), at the rate of 0.68 tons per capita annum(-1), which was mostly consumed in cooking followed by cottage industries, heating, community functions and others. The average fodder requirement per household was around 47.77 kg day(-1) with a total requirement of 14227.34 tons annum(-1). The average timber requirement per household was computed to be 0.346 m3 annum(-1) accounting for a total timber demand of 282.49 m3 annum(-1), which is mostly utilized in housing, followed by agricultural implements, rural furniture, carts and carriages, fencing, cattle shed/ store house and others. Forest biomass is the major source of fuel wood, fodder and timber for the primitive societies of the area contributing 1533.28 tons annum(-1) (51.48%) of the total fuel wood requirement, 6971.55 tons annum(-1) (49.00%) of the total fodder requirement and 136.36 m3 annum(-1) (48.27%) of the total timber requirement. The forest biomass is exposed to enormous pressure for securing the needs by the aboriginal people, posing great threat to biodiversity and environment of the region. Therefore, forest biomass conservation through intervention of alternative avenues is imperative to keep pace with the current development and future challenges in the area.

  10. Balancing Conservation and Economic Sustainability: The Future of the Amazon Timber Industry

    Science.gov (United States)

    Merry, Frank; Soares-Filho, Britaldo; Nepstad, Daniel; Amacher, Gregory; Rodrigues, Hermann

    2009-09-01

    Logging has been a much maligned feature of frontier development in the Amazon. Most discussions ignore the fact that logging can be part of a renewable, environmentally benign, and broadly equitable economic activity in these remote places. We estimate there to be some 4.5 ± 1.35 billion m3 of commercial timber volume in the Brazilian Amazon today, of which 1.2 billion m3 is currently profitable to harvest, with a total potential stumpage value of 15.4 billion. A successful forest sector in the Brazilian Amazon will integrate timber harvesting on private lands and on unprotected and unsettled government lands with timber concessions on public lands. If a legal, productive, timber industry can be established outside of protected areas, it will deliver environmental benefits in synergy with those provided by the region’s network of protected areas, the latter of which we estimate to have an opportunity cost from lost timber revenues of 2.3 billion over 30 years. Indeed, on all land accessible to harvesting, the timber industry could produce an average of more than 16 million m3 per year over a 30-year harvest cycle—entirely outside of current protected areas—providing 4.8 billion in returns to landowners and generating 1.8 billion in sawnwood sales tax revenue. This level of harvest could be profitably complemented with an additional 10% from logging concessions on National Forests. This advance, however, should be realized only through widespread adoption of reduced impact logging techniques.

  11. Analysis of the strength and stiffness of timber beams reinforced with carbon fiber and glass fiber

    Directory of Open Access Journals (Sweden)

    Juliano Fiorelli

    2003-06-01

    Full Text Available An experimental analysis of pinewood beams (Pinus caribea var hondurensis reinforced with glass and/or carbon fibers is discussed. The theoretical model employed to calculate the beam's bending strength takes into account the timber's ultimate limit states of tensile strength and failure by compression, considering a model of fragile elastic tension and plastic elastic compression. The validity of the theoretical model is confirmed by a comparison of the theoretical and experimental results, while the efficiency of the fiber reinforcement is corroborated by the increased strength and stiffness of the reinforced timber beams.

  12. Assessment of longitudinal modulus of elasticity in structural elements of Pinus Caribaea timber beams

    Directory of Open Access Journals (Sweden)

    André Luis Christoforo

    2012-05-01

    Full Text Available The current standard NBR 7190/1997 (Project of Timber Structures makes no reference to tests for determining the stiffness and strength in parts of structural lumber; restricting the analysis to bodies-of-tests with small dimensions and without defects. This paper presents an alternative method to determine the longitudinal modulus of elasticity in timber beams, based on the Finite Element Method, as well as the Inverse Analysis Method with an optimization technique. Results show that the methodology proposed by the Brazilian standard can also be applied to pieces of structural dimensions.

  13. Influence of growth stresses and material properties on distortion of sawn timber - numerical investigation

    DEFF Research Database (Denmark)

    Johansson, Marie; Ormarsson, Sigurdur

    2009-01-01

    The board distortion that occurs during the sawing and the drying process causes major problems in the utilisation of sawn timber. The distortion is highly influenced by parameters such as spiral grain angle, modulus of elasticity, shrinkage, growth stresses and sawing pattern. In this study...... a finite element simulation of log sawing and timber drying was performed to study how these parameters interact to affect board distortion. A total of 81 logs with different material combinations were simulated. From each simulated log four boards with different annual ring orientation were studied...

  14. Experimental verification of a weak zone model for timber in bending

    DEFF Research Database (Denmark)

    Källsner, B.; Ditlevsen, Ove Dalager; Salmela, K.

    1997-01-01

    In order to verify a stochastic model for the variation of bending strength within and between structural timber members, tests with long members subjected to constant bending moment have been performed. The span with constant moment contained between five and nine weak zones, i.e. zones...... with a cluster of knots. In a previous investigation test specimens, each containing one weak zone, have been tested in bending separately. Based on these tests a hierarchical model with two levels was formulated. The test results show that the bending strength of the long timber members on the average is 5...

  15. Process and device for producing a timber gear case for tunnels and mines

    Energy Technology Data Exchange (ETDEWEB)

    Foik, A

    1977-09-08

    A device is described for producing a timber gear case for tunnels and mines. Plank shaped pillars, partly overlapping one another are driven in parallel planes at an angle to the tunnel axis, close together and advancing relative to the face. The pillars are taken through supports erected one after the other in the longitudinal direction of the tunnel, and are supported. The process can be extended by producing a timber gear case to secure any type of underground space. The process produces further mechanisation of tunnelling and mining and also ensures greater safety for the miners.

  16. An improved method for calculating force distributions in moment-stiff timber connections

    DEFF Research Database (Denmark)

    Ormarsson, Sigurdur; Blond, Mette

    2012-01-01

    An improved method for calculating force distributions in moment-stiff metal dowel-type timber connections is presented, a method based on use of three-dimensional finite element simulations of timber connections subjected to moment action. The study that was carried out aimed at determining how...... the slip modulus varies with the angle between the direction of the dowel forces and the fibres in question, as well as how the orthotropic stiffness behaviour of the wood material affects the direction and the size of the forces. It was assumed that the force distribution generated by the moment action...

  17. Socio-technical barriers to the use of energy-efficient timber drying technology in New Zealand

    International Nuclear Information System (INIS)

    Bell, Martha; Carrington, Gerry; Lawson, Rob; Stephenson, Janet

    2014-01-01

    This study of industrial energy behaviours identifies barriers to the use of energy-efficient drying technology in the New Zealand timber industry, and explores these barriers through the “energy cultures” lens. Vented kiln dryers were preferred by larger firms and heat pump kiln dryers were used by smaller firms. Although few firms could specify all their costs, we found no significant differences in the average operating costs, drying costs or commercial success of the larger and smaller firms. We found that socio-technical barriers create “energy cultures” at the level of both the firm and the sector, supporting the dominance of vented kiln dryers. The prevailing technologies, practices and norms at the sector level strongly support vented kilns, the status quo being embedded in the socio-technical context, hindering technological learning, improved energy efficiency and innovation. Influential stakeholders in the industry were thus part of, and locked into, the industry-wide energy culture, and were not in a position to effect change. We conclude that actors external to the prevailing industry energy culture need to leverage change in the industry norms, practices and/or technologies in order to reap the advantages of energy-efficient drying technology, assist its continued evolution and avoid the risks of path-dependency. - Highlights: • Firms processing timber in New Zealand use two main drying technologies. • Relatively inefficient vented dryers dominate over energy-efficient heat pumps. • Operating costs are similar but the socio-technical regime supports vented dryers. • Stasis is created by fixed energy cultures both within firms and across the sector. • Stasis hampers technical development in heat pump drying and business innovation

  18. Identifying the hotspots of non-renewable water use using HiGW-MAT: A new land surface model coupled with human interventions and ground water reservoir

    Science.gov (United States)

    Oki, T.; Pokhrel, Y. N.; Yeh, P. J.; Koirala, S.; Kanae, S.; Hanasaki, N.

    2011-12-01

    The real hydrological cycles on the Earth are not natural anymore. Global hydrological model simulations of the water cycle and available water resources should have an ability to consider the effects of human interventions on hydrological cycles. Anthropogenic activity modules (Hanasaki et al., 2008), such as reservoir operation, crop growth and water demand in crop lands, and environmental flows, were incorporated into a land surface model called MATSIRO (Takata et al., 2003), to form a new model, MAT-HI (Pokhrel et al., 2011). Total terrestrial water storages (TWS) in large river basins were estimated using the new model by off-line simulation, and compared with the TWS observed by GRACE for 2002-2007. The results showed MAT-HI has an advantage estimating TWS particularly in arid river basins compared with H08 (Hanasaki et al., 2008). MAT-HI was further coupled with a module representing the ground water level fluctuations (Yeh et al., 2005), and consists a new land surface scheme HiGW-MAT (Human Intervention and Ground Water coupled MATSIRO). HiGW-MAT is also associated with a scheme tracing the origin and flow path with the consideration on the sources of water withdrawal from stream flow, medium-size reservoirs and nonrenewable groundwater in addition to precipitation to croplands enabled the assessment of the origin of water producing major crops as Hanasaki et al. (2010). Areas highly dependent on nonrenewable groundwater are detected in the Pakistan, Bangladesh, western part of India, north and western parts of China, some regions in the Arabian Peninsula and the western part of the United States through Mexico. Cumulative nonrenewable groundwater withdrawals estimated by the model are corresponding fairly well with the country statistics of total groundwater withdrawals. Ground water table depletions in large aquifers in US estimated by HiGW-MAT were compared with in-situ observational data, and the correspondences are very good. Mean global exploitation

  19. Evaluation of a Three-Dimensional Stereophotogrammetric Method to Identify and Measure the Palatal Surface Area in Children With Unilateral Cleft Lip and Palate.

    Science.gov (United States)

    De Menezes, Marcio; Cerón-Zapata, Ana Maria; López-Palacio, Ana Maria; Mapelli, Andrea; Pisoni, Luca; Sforza, Chiarella

    2016-01-01

    To assess a three-dimensional (3D) stereophotogrammetric method for area delimitation and evaluation of the dental arches of children with unilateral cleft lip and palate (UCLP). Obtained data were also used to assess the 3D changes occurring in the maxillary arch with the use of orthopedic therapy prior to rhinocheiloplasty and before the first year of life. Within the collaboration between the Università degli Studi di Milano (Italy) and the University CES of Medellin (Colombia), 96 palatal cast models obtained from neonatal patients with UCLP were analyzed using a 3D stereophotogrammetric imaging system. The area of the minor and greater cleft segments on the digital dental cast surface were delineated by the visualization tool of the stereophotogrammetric software and then examined. "Trueness" of the measurements, as well as systematic and random errors between operators' tracings ("precision") were calculated. The method gave area measurements close to true values (errors lower than 2%), without systematic measurement errors for tracings by both interoperators and intraoperators (P > .05). Statistically significant differences (P digital dental casts and area measurements by the 3D stereophotogrammetric system revealed an accurate (true and precise) method for evaluating the stone casts of newborn patients with UCLP.

  20. Impact of professional foresters on timber harvests on West Virginia nonindustrial private forests

    Science.gov (United States)

    Stuart A. Moss; Eric. Heitzman

    2013-01-01

    Timber harvests conducted on 90 nonindustrial private forest properties in West Virginia were investigated to determine the effects that professional foresters have on harvest and residual stand attributes. Harvests were classified based on the type of forester involved: (1) consulting/state service foresters representing landowners, (2) industry foresters representing...