Clinical staff nurse leadership: Identifying gaps in competency development.

Science.gov (United States)

Franks-Meeks, Sherron

2018-01-01

To date, there has been no development of a complete, applicable inventory of clinical staff nurse (CSN) leadership role competencies through a valid and reliable methodology. Further, the CSN has not been invited to engage in the identification, definition, or development of their own leadership competencies. Compare existing leadership competencies to identify and highlight gaps in clinical staff nurse leadership role competency development and validation. Literature review. The CSN has not participated in the development of CSN leadership role competencies, nor have the currently identified CSN leadership role competencies been scientifically validated through research. Finally, CSN leadership role competencies are incomplete and do not reflect the CSN perspective. © 2017 Wiley Periodicals, Inc.

Lightweight Materials for Vehicles: Needs, Goals, and Future Technologies

Science.gov (United States)

2010-08-01

during heating, cooling, and deformation - Developing an improved understanding of the kinetics and mechanisms for tranisition Friction Stir Welding ...technology worthiness - Identify new gaps and opportunities Pre- competitive Research Solicitations and Demonstrations - Identify technology gaps...or processing . Key Technology Gaps Active Research . Gap: Microstructural damage during welding limits potential usefulness - Many

Enabling fast charging – A battery technology gap assessment

Energy Technology Data Exchange (ETDEWEB)

Ahmed, Shabbir; Bloom, Ira; Jansen, Andrew N.; Tanim, Tanvir; Dufek, Eric J.; Pesaran, Ahmad; Burnham, Andrew; Carlson, Richard B.; Dias, Fernando; Hardy, Keith; Keyser, Matthew; Kreuzer, Cory; Markel, Anthony; Meintz, Andrew; Michelbacher, Christopher; Mohanpurkar, Manish; Nelson, Paul A.; Robertson, David C.; Scoffield, Don; Shirk, Matthew; Stephens, Thomas; Vijayagopal, Ram; Zhang, Jiucai

2017-11-01

The battery technology literature is reviewed, with an emphasis on key elements that limit extreme fast charging. Key gaps in existing elements of the technology are presented as well as developmental needs. Among these needs are advanced models and methods to detect and prevent lithium plating; new positive-electrode materials which are less prone to stress-induced failure; better electrode designs to accommodate very rapid diffusion in and out of the electrode; measure temperature distributions during fast charge to enable / validate models; and develop thermal management and pack designs to accommodate the higher operating voltage.

GapBlaster-A Graphical Gap Filler for Prokaryote Genomes.

Directory of Open Access Journals (Sweden)

Pablo H C G de Sá

Full Text Available The advent of NGS (Next Generation Sequencing technologies has resulted in an exponential increase in the number of complete genomes available in biological databases. This advance has allowed the development of several computational tools enabling analyses of large amounts of data in each of the various steps, from processing and quality filtering to gap filling and manual curation. The tools developed for gap closure are very useful as they result in more complete genomes, which will influence downstream analyses of genomic plasticity and comparative genomics. However, the gap filling step remains a challenge for genome assembly, often requiring manual intervention. Here, we present GapBlaster, a graphical application to evaluate and close gaps. GapBlaster was developed via Java programming language. The software uses contigs obtained in the assembly of the genome to perform an alignment against a draft of the genome/scaffold, using BLAST or Mummer to close gaps. Then, all identified alignments of contigs that extend through the gaps in the draft sequence are presented to the user for further evaluation via the GapBlaster graphical interface. GapBlaster presents significant results compared to other similar software and has the advantage of offering a graphical interface for manual curation of the gaps. GapBlaster program, the user guide and the test datasets are freely available at https://sourceforge.net/projects/gapblaster2015/. It requires Sun JDK 8 and Blast or Mummer.

Bridging the Gap: Self-Directed Staff Technology Training

Directory of Open Access Journals (Sweden)

Kayla L. Quinney

2010-12-01

Full Text Available Undergraduates, as members of the Millennial Generation, are proficient in Web 2.0 technology and expect to apply these technologies to their coursework—including scholarly research. To remain relevant, academic libraries need to provide the technology that student patrons expect, and academic librarians need to learn and use these technologies themselves. Because leaders at the Harold B. Lee Library of Brigham Young University (HBLL perceived a gap in technology use between students and their staff and faculty, they developed and implemented the Technology Challenge, a self-directed technology training program that rewarded employees for exploring technology daily. The purpose of this paper is to examine the Technology Challenge through an analysis of results of surveys given to participants before and after the Technology Challenge was implemented. The program will also be evaluated in terms of the adult learning theories of andragogy and selfdirected learning. HBLL found that a self-directed approach fosters technology skills that librarians need to best serve students. In addition, it promotes lifelong learning habits to keep abreast of emerging technologies. This paper offers some insights and methods that could be applied in other libraries, the most valuable of which is the use of self-directed and andragogical training methods to help academic libraries better integrate modern technologies.

Hydrogen Safety Sensor Performance and Use Gap Analysis: Preprint

Energy Technology Data Exchange (ETDEWEB)

Buttner, William J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Burgess, Robert M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Schmidt, Kara [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Hartmann, Kevin S [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Wright, Hannah [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Weidner, Eveline [Joint Research Centre, Petten, the Netherlands; Cebolla, Rafael O. [Joint Research Centre, Petten, the Netherlands; Bonato, Christian [Joint Research Centre, Petten, the Netherlands; Moretto, Pietro [Joint Research Centre, Petten, the Netherlands

2017-11-15

Hydrogen sensors are recognized as an important technology for facilitating the safe implementation of hydrogen as an alternative fuel, and there are numerous reports of a sensor alarm successfully preventing a potentially serious event. However, gaps in sensor metrological specifications, as well as in their performance for some applications, exist.The U.S. Department of Energy (DOE) Fuel Cell Technology Office published a short list of critical gaps in the 2007 and 2012 multiyear project plans; more detailed gap analyses were independently performed by the JRC and NREL. There have been, however, some significant advances in sensor technologies since these assessments, including the commercial availability of hydrogen sensors with fast response times (t90 less than 1 s, which had been an elusive DOE target since 2007), improved robustness to chemical poisons, improved selectivity, and improved lifetime and stability. These improvements, however, have not been universal and typically pertain to select platforms or models. Moreover, as hydrogen markets grow and new applications are being explored, more demands will be imposed on sensor performance. The hydrogen sensor laboratories at NREL and JRC are currently updating the hydrogen safety sensor gap analysis through direct interaction with international stakeholders in the hydrogen community, especially end-users. NREL and the JRC are currently organizing a series of workshops (in Europe and the U.S.) with sensor developers, end-users, and other stakeholders in 2017 to identify technology gaps and to develop a path forward to address them. One workshop is scheduled for May 10 in Brussels, Belgium at the Headquarters of the Fuel Cell and Hydrogen Joint Undertaking. A second workshop is planned at the National Renewable Energy Laboratory in Golden, CO, USA. This presentation will review improvements in sensor technologies in the past 5 to 10 years, identify gaps in sensor performance and use requirements, and identify

Using Satellite Data to Identify the Causes of and Potential Solutions for Yield Gaps in India's Wheat Belt

Science.gov (United States)

Jain, M.; Singh, B.; Srivastava, A.; Malik, R. K.; McDonald, A.; Lobell, D. B.

2017-12-01

Food security will be increasingly challenged by climate change, natural resource degradation, and population growth. Wheat yields, in particular, have already stagnated in many regions and will be further affected by warming temperatures. Despite these challenges, wheat yields can be increased by improving management practices in regions with existing yield gaps. We present two studies that are using satellite data to better understand the factors contributing to yield gaps and potential interventions to close yield gaps in India's main wheat belt, the Indo-Gangetic Plains (IGP). To identify the magnitude and causes of current yield gaps, we produced 30 meter resolution yield maps from 2001 to 2015 using Landsat sallite data and a new method that translates satellite vegetation indices to yield estimates using crop model simulations, bypassing the need for ground calibration data. This is one of the first attempts to apply this method to a smallholder agriculture system, where ground calibration data are rarely available. We find that yields can be increased by 11% on average and up to 32% in the eastern IGP by improving management to current best practices within a given district. Additionally, if current best practices from the highest-yielding state of Punjab are implemented in the eastern IGP, yields could increase by almost 110%. Considering the factors that most influence yields, later sow dates and warmer temperatures are most associated with low yields across the IGP. This suggests that strategies to reduce the negative effects of heat stress, like earlier sowing and planting heat-tolerant wheat varieties, are critical to increasing wheat yields in this globally-important agricultural region. We also apply this method to high-resolution micro-satellite data (impacts of a new fertilizer spreader technology and identify whether satellite data can be used to appropriately target this intervention.

New technology for the control of narrow-gap semiconductors

International Nuclear Information System (INIS)

Antoniou, I.; Bozhevolnov, V.; Melnikov, Yu.; Yafyasov, A.

2003-01-01

We present the results of the year work in the frame of the EU ESPRIT Project 28890 NTCONGS 'New technology for the control of narrow-gap semiconductors'. This work has involved both theoretical and experimental study, as well as the development of new specific equipment, towards the creation of a new generation of nanoelectronic devices able to operate at 77 K and even at room temperature

Identifying gaps, barriers, and solutions in implementing pressure ulcer prevention programs.

Science.gov (United States)

Jankowski, Irene M; Nadzam, Deborah Morris

2011-06-01

Patients continue to suffer from pressure ulcers (PUs), despite implementation of evidence-based pressure ulcer (PU) prevention protocols. In 2009, Joint Commission Resources (JCR) and Hill-Rom created the Nurse Safety Scholar-in-Residence (nurse scholar) program to foster the professional development of expert nurse clinicians to become translators of evidence into practice. The first nurse scholar activity has focused on PU prevention. Four hospitals with established PU programs participated in the PU prevention implementation project. Each hospital's team completed an inventory of PU prevention program components and provided copies of accompanying documentation, along with prevalence and incidence data. Site visits to the four participating hospitals were arranged to provide opportunities for more in-depth analysis and support. Following the initial site visit, the project team at each hospital developed action plans for the top three barriers to PU program implementation. A series of conference calls was held between the site visits. Pressure Ulcer Program Gaps and Recommendations. The four hospitals shared common gaps in terms of limitations in staff education and training; lack of physician involvement; limited involvement of unlicensed nursing staff; lack of plan for communicating at-risk status; and limited quality improvement evaluations of bedside practices. Detailed recommendations were identified for addressing each of these gaps. these Recommendations for eliminating gaps have been implemented by the participating teams to drive improvement and to reduce hospital-acquired PU rates. The nurse scholars will continue to study implementation of best practices for PU prevention.

Closing the Gap in Education and Technology. World Bank Latin American and Caribbean Studies.

Science.gov (United States)

de Ferranti, David; Perry, Guillermo E.; Gill, Indermit; Guasch, J. Luis; Maloney, William F.; Sanchez-Paramo, Carolina; Schady, Norbert

This document examines the gap between the Latin America and Caribbean region and the world's developed nations in the areas of education and technology. It also examines policies and strategies to close the gap. The following are among the specific topics discussed: (1) skills upgrading and innovation policies (the major actors; the role of…

Producer firms, technology diffusion and spillovers to local suppliers : Examining the effects of Foreign Direct Investment and the technology gap

NARCIS (Netherlands)

Jordaan, J.A.

2017-01-01

In this paper, we conduct a detailed examination of the effects of Foreign Direct Investment (FDI) and the technology gap on local technology dissemination and spillovers. Using unique firm level data from surveys among FDI firms and domestic producer firms and a random sample of their suppliers in

Automated inspection of gaps on the free-form shape parts by laser scanning technologies

Science.gov (United States)

Zhou, Sen; Xu, Jian; Tao, Lei; An, Lu; Yu, Yan

2018-01-01

In industrial manufacturing processes, the dimensional inspection of the gaps on the free-form shape parts is critical and challenging, and is directly associated with subsequent assembly and terminal product quality. In this paper, a fast measuring method for automated gap inspection based on laser scanning technologies is presented. The proposed measuring method consists of three steps: firstly, the relative position is determined according to the geometric feature of measuring gap, which considers constraints existing in a laser scanning operation. Secondly, in order to acquire a complete gap profile, a fast and effective scanning path is designed. Finally, the range dimension of the gaps on the free-form shape parts including width, depth and flush, correspondingly, is described in a virtual environment. In the future, an appliance machine based on the proposed method will be developed for the on-line dimensional inspection of gaps on the automobile or aerospace production line.

Understanding the digital divide in the clinical setting: the technology knowledge gap experienced by US safety net patients during teleretinal screening.

Science.gov (United States)

George, Sheba; Moran, Erin; Fish, Allison; Ogunyemi, Lola

2013-01-01

Differential access to everyday technology and healthcare amongst safety net patients is associated with low technological and health literacies, respectively. These low rates of literacy produce a complex patient "knowledge gap" that influences the effectiveness of telehealth technologies. To understand this "knowledge gap", six focus groups (2 African-American and 4 Latino) were conducted with patients who received teleretinal screenings in U.S. urban safety-net settings. Findings indicate that patients' "knowledge gap" is primarily produced at three points: (1) when patients' preexisting personal barriers to care became exacerbated in the clinical setting; (2) through encounters with technology during screening; and (3) in doctor-patient follow-up. This "knowledge gap" can produce confusion and fear, potentially affecting patients' confidence in quality of care and limiting their disease management ability. In rethinking the digital divide to include the consequences of this knowledge gap faced by patients in the clinical setting, we suggest that patient education focus on both their disease and specific telehealth technologies deployed in care delivery.

Scientometric methods for identifying emerging technologies

Science.gov (United States)

Abercrombie, Robert K; Schlicher, Bob G; Sheldon, Frederick T

2015-11-03

Provided is a method of generating a scientometric model that tracks the emergence of an identified technology from initial discovery (via original scientific and conference literature), through critical discoveries (via original scientific, conference literature and patents), transitioning through Technology Readiness Levels (TRLs) and ultimately on to commercial application. During the period of innovation and technology transfer, the impact of scholarly works, patents and on-line web news sources are identified. As trends develop, currency of citations, collaboration indicators, and on-line news patterns are identified. The combinations of four distinct and separate searchable on-line networked sources (i.e., scholarly publications and citation, worldwide patents, news archives, and on-line mapping networks) are assembled to become one collective network (a dataset for analysis of relations). This established network becomes the basis from which to quickly analyze the temporal flow of activity (searchable events) for the example subject domain.

ExMC Technology Watch

Science.gov (United States)

Krihak, M.; Barr, Y.; Watkins, S.; Fung, P.; McGrath, T.; Baumann, D.

2012-01-01

The Technology Watch (Tech Watch) project is a NASA endeavor conducted under the Human Research Program's (HRP) Exploration Medical Capability (ExMC) element, and focusing on ExMC technology gaps. The project involves several NASA centers, including the Johnson Space Center (JSC), Glenn Research Center (GRC), Ames Research Center (ARC), and the Langley Research Center (LaRC). The objective of Tech Watch is to identify emerging, high-impact technologies that augment current NASA HRP technology development efforts. Identifying such technologies accelerates the development of medical care and research capabilities for the mitigation of potential health issues encountered during human space exploration missions. The aim of this process is to leverage technologies developed by academia, industry and other government agencies and to identify the effective utilization of NASA resources to maximize the HRP return on investment. The establishment of collaborations with these entities is beneficial to technology development, assessment and/or insertion and further NASA's goal to provide a safe and healthy environment for human exploration. In 2011, the major focus areas for Tech Watch included information dissemination, education outreach and public accessibility to technology gaps and gap reports. The dissemination of information was accomplished through site visits to research laboratories and/or companies, and participation at select conferences where Tech Watch objectives and technology gaps were presented. Presentation of such material provided researchers with insights on NASA ExMC needs for space exploration and an opportunity to discuss potential areas of common interest. The second focus area, education outreach, was accomplished via two mechanisms. First, several senior student projects, each related to an ExMC technology gap, were sponsored by the various NASA centers. These projects presented ExMC related technology problems firsthand to collegiate laboratories

Requirements and Technology Advances for Global Wind Measurement with a Coherent Lidar: A Shrinking Gap

Science.gov (United States)

Kavaya, Michael J.; Kavaya, Michael J.; Yu, Jirong; Koch, Grady J.; Amzajerdian, Farzin; Singh, Upendra N.; Emmitt, G. David

2007-01-01

Early concepts to globally measure vertical profiles of vector horizontal wind from space planned on an orbit height of 525 km, a single pulsed coherent Doppler lidar system to cover the full troposphere, and a continuously rotating telescope/scanner that mandated a vertical line of sight wind profile from each laser shot. Under these conditions system studies found that laser pulse energies of approximately 20 J at 10 Hz pulse repetition rate with a rotating telescope diameter of approximately 1.5 m was required. Further requirements to use solid state laser technology and an eyesafe wavelength led to the relatively new 2-micron solid state laser. With demonstrated pulse energies near 20 mJ at 5 Hz, and no demonstration of a rotating telescope maintaining diffraction limited performance in space, the technology gap between requirements and demonstration was formidable. Fortunately the involved scientists and engineers set out to reduce the gap, and through a combination of clever ideas and technology advances over the last 15 years, they have succeeded. This paper will detail the gap reducing factors and will present the current status.

Identifying Knowledge Gaps in Clinicians Who Evaluate and Treat Vocal Performing Artists in College Health Settings.

Science.gov (United States)

McKinnon-Howe, Leah; Dowdall, Jayme

2018-05-01

The goal of this study was to identify knowledge gaps in clinicians who evaluate and treat performing artists for illnesses and injuries that affect vocal function in college health settings. This pilot study utilized a web-based cross-sectional survey design incorporating common clinical scenarios to test knowledge of evaluation and management strategies in the vocal performing artist. A web-based survey was administered to a purposive sample of 28 clinicians to identify the approach utilized to evaluate and treat vocal performing artists in college health settings, and factors that might affect knowledge gaps and influence referral patterns to voice specialists. Twenty-eight clinicians were surveyed, with 36% of respondents incorrectly identifying appropriate vocal hygiene measures, 56% of respondents failing to identify symptoms of vocal fold hemorrhage, 84% failing to identify other indications for referral to a voice specialist, 96% of respondents acknowledging unfamiliarity with the Voice Handicap Index and the Singers Voice Handicap Index, and 68% acknowledging unfamiliarity with the Reflux Symptom Index. The data elucidated specific knowledge gaps in college health providers who are responsible for evaluating and treating common illnesses that affect vocal function, and triaging and referring students experiencing symptoms of potential vocal emergencies. Future work is needed to improve the standard of care for this population. Copyright © 2018 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

Identifying and overcoming barriers to technology implementation

International Nuclear Information System (INIS)

Bailey, M.; Warren, S.; McCune, M.

1996-01-01

In a recent General Accounting Office report, the Department of Energy's (DOE) Office of Environmental Management was found to be ineffective in integrating their environmental technology development efforts with the cleanup actions. As a result of these findings, a study of remediation documents was performed by the Technology Applications Team within DOE's Office of Environmental Restoration (EM-40) to validate this finding and to understand why it was occurring. A second initiative built on the foundation of the remediation document study and evaluated solutions to the ineffective implementation of improved technologies. The Technology Applications Team examined over 50 remediation documents (17 projects) which included nearly 600 proposed remediation technologies. It was determined that very few technologies are reaching the Records of Decision documents. In fact, most are eliminated in the early stages of consideration. These observations stem from regulators' and stakeholders' uncertainties in cost and performance of the technology and the inability of the technology to meet site specific conditions. The Technology Applications Team also set out to identify and evaluate solutions to barriers to implementing innovative technology into the DOE's environmental management activities. Through the combined efforts of DOE and the Hazardous Waste Action Coalition (HWAC), a full day workshop was conducted at the annual HWAC meeting in June 1995 to solve barriers to innovative technology implementation. Three barriers were identified as widespread throughout the DOE complex and industry. Identified barriers included a lack of verified or certified cost and performance data for innovative technologies; risk of failure to reach cleanup goals using innovative technologies; and communication barriers that are present at virtually every stage of the characterization/remediation process from development through implementation

Bridging the Gap

DEFF Research Database (Denmark)

Kramer Overgaard, Majken; Broeng, Jes; Jensen, Monika Luniewska

Bridging the Gap (BtG) is a 2-year project funded by The Danish Industry Foundation. The goal of Bridging the Gap has been to create a new innovation model which will increase the rate at which Danish universities can spinout new technology ventures.......Bridging the Gap (BtG) is a 2-year project funded by The Danish Industry Foundation. The goal of Bridging the Gap has been to create a new innovation model which will increase the rate at which Danish universities can spinout new technology ventures....

Is There A Rural-Urban Technology Gap? Results of the ERS Rural Manufacturing Survey

OpenAIRE

Gale, H. Frederick, Jr.

1997-01-01

Advanced technology use is less prevalent in rural than in urban manufacturing plants, but plants of comparable size in the same industry use about the same level of technology, regardless of urban/rural location. The rural gap comes about because the mix of rural industries is more heavily weighted with "low-technology" industries. Both rural and urban businesses rate inadequate worker skills as the most important barrier to use of new production technologies and management practices, while ...

Bridging the Gap in Knowledge Transfer between Academia and Practitioners

Science.gov (United States)

Gera, Rajat

2012-01-01

Purpose: The paper intends to identify the causes or gaps in transfer of managerial knowledge between academia and practitioners and to develop a framework that overcomes the gaps through knowledge management, information technology and human resource practices. The paper aims to suggest a strategic approach based on the knowledge transfer cycle.…

The role of surgeons in identifying emerging technologies for health technology assessment.

Science.gov (United States)

Stafinski, Tania; Topfer, Leigh-Ann; Zakariasen, Ken; Menon, Devidas

2010-04-01

Health technology assessment (HTA) is a tool intended to help policy-makers decide which technologies to fund. However, given the proliferation of new technologies, it is not possible to undertake an HTA of each one before it becomes funded. Consequently, "horizon-scanning" processes have been developed to identify emerging technologies that are likely to have a substantial impact on clinical practice. Although the importance of physicians in the adoption of new technologies is well recognized, their role in horizon scanning in Canada has been limited. The purpose of this project was to pilot an approach to engage physicians, specifically surgeons, in provincial horizon-scanning activities. We invited 18 surgeons from Alberta's 2 medical schools to a horizon-scanning workshop to solicit their views on emerging technologies expected to impact surgical practice within the next 5 years and/or the importance of different attributes or characteristics of new technologies. Surgeons, regardless of specialty, identified developments designed to enhance existing minimally invasive surgical techniques, such as endoscopic, robotic and image-guided surgery. Several nonsurgical areas, including molecular genetics and nano technology, were also identified. Of the 13 technology attributes discussed, safety or risk, effectiveness and feasibility were rated as most important. Lastly, participating surgeons expressed an interest in becoming further involved in local HTA initiatives. Surgeons, as adopters and users of health technologies, represent an important and accessible information source for identifying emerging technologies for HTA. A more formal, ongoing relationship between the government, HTA and surgeons may help to optimize the use of HTA resources.

Bridging the Gap from Networking Technologies to Applications: Workshop Report

Science.gov (United States)

Johnson, Marjory J.; desJardins, Richard

2000-01-01

The objective of the Next Generation Internet (NGI) Federal program is threefold, encompassing development of networking technologies, high-performance network testbeds, and revolutionary applications. There have been notable advances in emerging network technologies and several nationwide testbeds have been established, but the integration of emerging technologies into applications is lagging. To help bridge this gap between developers of NGI networking technologies and developers of NGI applications, the NASA Research and Education Network (NREN) project hosted a two-day workshop at NASA Ames Research Center in August 1999. This paper presents a summary of the results of this workshop and also describes some of the challenges NREN is facing while incorporating new technologies into HPCC and other NASA applications. The workshop focused on three technologies - Quality of Service (QoS), advanced multicast, and security-and five major NGI application areas - telemedicine, digital earth, digital video, distributed data-intensive applications, and computational infrastructure applications. Network technology experts, application developers, and NGI testbed representatives came together at the workshop to promote cross-fertilization between the groups. Presentations on the first day, including an overview of the three technologies, application case studies and testbed status reports, laid the foundation for discussions on the second day. The objective of these latter discussions, held within smaller breakout groups, was to establish a coherent picture of the current status of the various pieces of each of the three technologies, to create a roadmap outlining future technology development, and to offer technological guidance to application developers. In this paper we first present a brief overview of the NGI applications that were represented at the workshop, focusing on the identification of technological advances that have successfully been incorporated in each

Mind the Gap. A systematic review to identify usability and safety challenges and practices during electronic health record implementation.

Science.gov (United States)

Ratwani, Raj; Fairbanks, Terry; Savage, Erica; Adams, Katie; Wittie, Michael; Boone, Edna; Hayden, Andrew; Barnes, Janey; Hettinger, Zach; Gettinger, Andrew

2016-11-16

Decisions made during electronic health record (EHR) implementations profoundly affect usability and safety. This study aims to identify gaps between the current literature and key stakeholders' perceptions of usability and safety practices and the challenges encountered during the implementation of EHRs. Two approaches were used: a literature review and interviews with key stakeholders. We performed a systematic review of the literature to identify usability and safety challenges and best practices during implementation. A total of 55 articles were reviewed through searches of PubMed, Web of Science and Scopus. We used a qualitative approach to identify key stakeholders' perceptions; semi-structured interviews were conducted with a diverse set of health IT stakeholders to understand their current practices and challenges related to usability during implementation. We used a grounded theory approach: data were coded, sorted, and emerging themes were identified. Conclusions from both sources of data were compared to identify areas of misalignment. We identified six emerging themes from the literature and stakeholder interviews: cost and resources, risk assessment, governance and consensus building, customization, clinical workflow and usability testing, and training. Across these themes, there were misalignments between the literature and stakeholder perspectives, indicating major gaps. Major gaps identified from each of six emerging themes are discussed as critical areas for future research, opportunities for new stakeholder initiatives, and opportunities to better disseminate resources to improve the implementation of EHRs. Our analysis identified practices and challenges across six different emerging themes, illustrated important gaps, and results suggest critical areas for future research and dissemination to improve EHR implementation.

Policy gaps and technological deficiencies in social networking environments: Implications for information sharing

Directory of Open Access Journals (Sweden)

Stephen M. Mutula

2013-06-01

Objectives: The study sought to investigate the following research objectives to: (1 describe the types of social networks, (2 examine global penetration of the social networks, (3 outline the users’ legitimate rights that must be protected in the social networking sites (SNS, (4 determine the methods employed by SNS to protect the users’ legitimate rights and (5 identify the policy gaps and technological deficiencies in the protection of the users’ legitimate rights in the SNS. Method: A literature survey and content analysis of the SNS user policies were used to address objective four and objective five respectively. Results: The most actively used sites were Facebook and Twitter. Asian markets were leading in participation and in creating content than any other region. Business, education, politics and governance sectors were actively using social networking sites. Social networking sites relied upon user trust and internet security features which however, were inefficient and inadequate. Conclusion: Whilst SNS were impacting people of varying ages and of various professional persuasions, there were increased concerns about the violation and infringement of the users’ legitimate rights. Reliance on user trust and technological security features SNS to protect the users’ legitimate rights seemed ineffectual and inadequate.

Closing the Technological Gender Gap: Feminist Pedagogy in the Computer-Assisted Classroom.

Science.gov (United States)

Hesse-Biber, Sharlene; Gilbert, Melissa Kesler

1994-01-01

Asserts that, although computers are playing an increasingly important role in the classroom, a technological gender gap serves as a barrier to the effective use of computers by women instructors in higher education. Encourages women to seize computer tools for their own educational purposes and argues for enhancing women's computer learning. (CFR)

Strategic Business-IT alignment of application software packages: Bridging the Information Technology gap

Directory of Open Access Journals (Sweden)

Wandi Kruger

2012-09-01

Full Text Available An application software package implementation is a complex endeavour, and as such it requires the proper understanding, evaluation and redefining of the current business processes to ensure that the implementation delivers on the objectives set at the start of the project. Numerous factors exist that may contribute to the unsuccessful implementation of application software packages. However, the most significant contributor to the failure of an application software package implementation lies in the misalignment of the organisation’s business processes with the functionality of the application software package. Misalignment is attributed to a gap that exists between the business processes of an organisation and what functionality the application software package has to offer to translate the business processes of an organisation into digital form when implementing and configuring an application software package. This gap is commonly referred to as the information technology (IT gap. This study proposes to define and discuss the IT gap. Furthermore this study will make recommendations for aligning the business processes with the functionality of the application software package (addressing the IT gap. The end result of adopting these recommendations will be more successful application software package implementations.

Bridging technology gaps in realizing goals towards peaceful uses of nuclear energy

International Nuclear Information System (INIS)

Mohanty, P.R.; Haldar, T.K.

2009-01-01

India is committed towards peaceful uses of Nuclear Energy and Nuclear Power occupies its centre stage. In the nuclear fuel cycle, apart from the fuel material itself, the programme needs a host of other materials in specific physical and chemical form. In this context, Heavy Water Board, a constituent unit of DAE, initiated technology development campaigns centering around three broad areas, i.e Specialty chemicals like organo-phosphorus solvents; solvent extraction technology including suitable equipment for use as liquid-liquid contacting device; and stable isotope like Boron-10. In a short span of about 7 years, it has successfully developed, demonstrated and deployed these technologies. This article gives an overview of these activities and the strategy adopted towards bridging technology gaps in realizing goals towards peaceful uses of Nuclear Energy. (author)

Identifying an Education Gap in Wound Care Training in United States Dermatology.

Science.gov (United States)

Ruiz, Emily Stamell; Ingram, Amber; Landriscina, Angelo; Tian, Jiaying; Kirsner, Robert S; Friedman, Adam

2015-07-01

As restoration of the integument is paramount to wound healing, dermatologists should be central to managing wounds; yet this is often not the case. If a training gap exists during residency training, this may account for the observed discrepancy. To identify United States (US) dermatology residents' impressions regarding their preparedness to care for wounds, and to assess the amount and type of training devoted to wound care during residency. An online survey among current US dermatology residents enrolled in a residency training program. The primary goal was to determine whether dermatology residents believe more wound care education is needed, evaluate preparedness to care for wounds, and identify future plans to manage wounds. Responses were received from 175 of 517 (33.8%) US Dermatology residents contacted. The majority of residents did not feel prepared to manage acute (78.3%) and chronic (84.6%) wounds. Over three quarters (77.1%) felt that more education is needed. Fewer than half (49.1% and 35.4%) of residents planned to care for acute and chronic wounds, respectively, when in practice. There is a gap in wound care education in US dermatology residency training. This translates to a low percentage of dermatology residents planning to care for wounds in future practice. Dermatology residents need to receive focused wound care training in order to translate the underpinnings of wound healing biology and ultimately better serve patients.

An Investigation to Validate the Grammar and Phonology Screening (GAPS) Test to Identify Children with Specific Language Impairment

Science.gov (United States)

van der Lely, Heather K. J.; Payne, Elisabeth; McClelland, Alastair

2011-01-01

Background The extraordinarily high incidence of grammatical language impairments in developmental disorders suggests that this uniquely human cognitive function is “fragile”. Yet our understanding of the neurobiology of grammatical impairments is limited. Furthermore, there is no “gold-standard” to identify grammatical impairments and routine screening is not undertaken. An accurate screening test to identify grammatical abilities would serve the research, health and education communities, further our understanding of developmental disorders, and identify children who need remediation, many of whom are currently un-diagnosed. A potential realistic screening tool that could be widely administered is the Grammar and Phonology Screening (GAPS) test – a 10 minute test that can be administered by professionals and non-professionals alike. Here we provide a further step in evaluating the validity and accuracy (sensitivity and specificity) of the GAPS test in identifying children who have Specific Language Impairment (SLI). Methods and Findings We tested three groups of children; two groups aged 3;6–6:6, a typically developing (n = 30) group, and a group diagnosed with SLI: (n = 11) (Young (Y)-SLI), and a further group aged 6;9–8;11 with SLI (Older (O)-SLI) (n = 10) who were above the test age norms. We employed a battery of language assessments including the GAPS test to assess the children's language abilities. For Y-SLI children, analyses revealed a sensitivity and specificity at the 5th and 10th percentile of 1.00 and 0.98, respectively, and for O-SLI children at the 10th and 15th percentile .83 and .90, respectively. Conclusions The findings reveal that the GAPS is highly accurate in identifying impaired vs. non-impaired children up to 6;8 years, and has moderate-to-high accuracy up to 9 years. The results indicate that GAPS is a realistic tool for the early identification of grammatical abilities and impairment in young children. A larger

Exploration Medical Capability - Technology Watch

Science.gov (United States)

Krihak, Michael; Watkins, Sharmila; Barr, Yael; Barsten, Kristina; Fung, Paul; Baumann, David

2011-01-01

The objectives of the Technology Watch process are to identify emerging, high-impact technologies that augment current ExMC development efforts, and to work with academia, industry, and other government agencies to accelerate the development of medical care and research capabilities for the mitigation of potential health issues that could occur during space exploration missions. The establishment of collaborations with these entities is beneficial to technology development, assessment and/or insertion. Such collaborations also further NASA s goal to provide a safe and healthy environment for human exploration. The Tech Watch project addresses requirements and capabilities identified by knowledge and technology gaps that are derived from a discrete set of medical conditions that are most likely to occur on exploration missions. These gaps are addressed through technology readiness level assessments, market surveys, collaborations and distributed innovation opportunities. Ultimately, these gaps need to be closed with respect to exploration missions, and may be achieved through technology development projects. Information management is a key aspect to this process where Tech Watch related meetings, research articles, collaborations and partnerships are tracked by the HRP s Exploration Medical Capabilities (ExMC) Element. In 2011, ExMC will be introducing the Tech Watch external website and evidence wiki that will provide access to ExMC technology and knowledge gaps, technology needs and requirements documents.

Wide-Gap Chalcopyrites

CERN Document Server

Siebentritt, Susanne

2006-01-01

Chalcopyrites, in particular those with a wide band gap, are fascinating materials in terms of their technological potential in the next generation of thin-film solar cells and in terms of their basic material properties. They exhibit uniquely low defect formation energies, leading to unusual doping and phase behavior and to extremely benign grain boundaries. This book collects articles on a number of those basic material properties of wide-gap chalcopyrites, comparing them to their low-gap cousins. They explore the doping of the materials, the electronic structure and the transport through interfaces and grain boundaries, the formation of the electric field in a solar cell, the mechanisms and suppression of recombination, the role of inhomogeneities, and the technological role of wide-gap chalcopyrites.

Technology acceptance perception for promotion of sustainable consumption.

Science.gov (United States)

Biswas, Aindrila; Roy, Mousumi

2018-03-01

Economic growth in the past decades has resulted in change in consumption pattern and emergence of tech-savvy generation with unprecedented increase in the usage of social network technology. In this paper, the technology acceptance value gap adapted from the technology acceptance model has been applied as a tool supporting social network technology usage and subsequent promotion of sustainable consumption. The data generated through the use of structured questionnaires have been analyzed using structural equation modeling. The validity of the model and path estimates signifies the robustness of Technology Acceptance value gap in adjudicating the efficiency of social network technology usage in augmentation of sustainable consumption and awareness. The results indicate that subjective norm gap, ease-of-operation gap, and quality of green information gap have the most adversarial impact on social network technology usage. Eventually social networking technology usage has been identified as a significant antecedent of sustainable consumption.

Setting Priorities for Diabetic Retinopathy Clinical Research and Identifying Evidence Gaps.

Science.gov (United States)

Le, Jimmy T; Hutfless, Susan; Li, Tianjing; Bressler, Neil M; Heyward, James; Bittner, Ava K; Glassman, Adam; Dickersin, Kay

2017-01-01

Prioritizing comparative effectiveness research may contribute to obtaining answers that clinicians perceive they need and may minimize research that could be considered wasteful. Our objective was to identify evidence gaps and set priorities for new systematic reviews and randomized controlled trials for managing diabetic retinopathy (DR), including diabetic macular edema (DME). Cross-sectional study. Diabetic Retinopathy Clinical Research Network (DRCR.net) investigators. We provided recommendations from the American Academy of Ophthalmology's 2012 Preferred Practice Patterns for Diabetic Retinopathy as 91 answerable clinical research questions about intervention effectiveness to 410 DRCR.net investigators to rate each question's importance from 0 (not important) to 10 (very important) using a 2-round Delphi survey and to suggest additional questions. We considered questions as high priority if at least 75% of respondents to both rounds assigned an importance rating of 5 or more in round 2. We also extracted outcome measures relevant to DR and asked respondents to identify those that must be measured in all studies. We mapped Cochrane reviews published up to March 2016 to high-priority clinical research questions. Ranking of importance of each clinical question. Thirty-two individuals completed rounds 1 and 2 and suggested 15 questions. Among the final list of 106 clinical research questions, 22 questions met our definition of high priority: 9 of 22 concerned the effectiveness of anti-VEGF therapy, and 13 of 22 focused on how often patients should be followed up (re-examination) and treatment effectiveness in patients with specific characteristics (e.g., DME). Outcomes that 75% or more of respondents marked as "must be measured in all studies" included visual acuity and visual loss, death of participants, and intraocular pressure. Only 1 prioritized question was associated with conclusive evidence from a Cochrane systematic review. A limited response rate among

Innovation strategy management survey of the Chilean biomedical industry. Assessment of windows of opportunities to reduce technological gaps.

Science.gov (United States)

Bas, Tomas Gabriel; Oliu, Carolina Alejandra

2018-04-01

The convergence of different theories (ie, catch-up effect and windows of opportunities) allows for the interpretation of different "technological innovation gaps" in Chile's biomedical industry. It is common knowledge that Chile has always had an economy almost exclusively based on services, commodities, and mainly in the exploitation of natural resources with low value added. The literature confirms that countries that concentrate their economies on the knowledge, research, development, and commercialization of technology and innovation have a better and more stable growth rate in the medium and long run. The "Asian Tigers" are a good example of this. Analyzing the technological gaps that affect the Chilean biomedical industry, it is possible to find windows of opportunities to catch up. This could allow the country to take its knowledge, skills, and capabilities further, thus enabling Chile to not just depend on its unpredictable natural resources. For the first time, a quantitative diagnosis of the Chilean biomedical industry was made. This study considered the Chilean biomedical industry and its innovation and entrepreneurship environment, taking into account its productive capacities and its potential to make progress in technological innovation and, as a result, dramatically reducing technological gaps through windows of opportunities. Copyright © 2018 John Wiley & Sons, Ltd.

Designing Health Information Technology Tools to Prevent Gaps in Public Health Insurance.

Science.gov (United States)

Hall, Jennifer D; Harding, Rose L; DeVoe, Jennifer E; Gold, Rachel; Angier, Heather; Sumic, Aleksandra; Nelson, Christine A; Likumahuwa-Ackman, Sonja; Cohen, Deborah J

2017-06-23

Changes in health insurance policies have increased coverage opportunities, but enrollees are required to annually reapply for benefits which, if not managed appropriately, can lead to insurance gaps. Electronic health records (EHRs) can automate processes for assisting patients with health insurance enrollment and re-enrollment. We describe community health centers' (CHC) workflow, documentation, and tracking needs for assisting families with insurance application processes, and the health information technology (IT) tool components that were developed to meet those needs. We conducted a qualitative study using semi-structured interviews and observation of clinic operations and insurance application assistance processes. Data were analyzed using a grounded theory approach. We diagramed workflows and shared information with a team of developers who built the EHR-based tools. Four steps to the insurance assistance workflow were common among CHCs: 1) Identifying patients for public health insurance application assistance; 2) Completing and submitting the public health insurance application when clinic staff met with patients to collect requisite information and helped them apply for benefits; 3) Tracking public health insurance approval to monitor for decisions; and 4) assisting with annual health insurance reapplication. We developed EHR-based tools to support clinical staff with each of these steps. CHCs are uniquely positioned to help patients and families with public health insurance applications. CHCs have invested in staff to assist patients with insurance applications and help prevent coverage gaps. To best assist patients and to foster efficiency, EHR based insurance tools need comprehensive, timely, and accurate health insurance information.

Long-Term Stewardship Science and Technology Requirements

International Nuclear Information System (INIS)

McDonald, J.K.; Nickelson, R.A.

2002-01-01

To ensure technology developed for long-term stewardship will meet existing requirements, a review of requirements was performed. In addition to identifying existing science and technology related requirements, gaps and conflicts of requirements were identified

DCS: A Case Study of Identification of Knowledge and Disposition Gaps Using Principles of Continuous Risk Management

Science.gov (United States)

Norcross, Jason; Steinberg, Susan; Kundrot, Craig; Charles, John

2011-01-01

The Human Research Program (HRP) is formulated around the program architecture of Evidence-Risk-Gap-Task-Deliverable. Review of accumulated evidence forms the basis for identification of high priority risks to human health and performance in space exploration. Gaps in knowledge or disposition are identified for each risk, and a portfolio of research tasks is developed to fill them. Deliverables from the tasks inform the evidence base with the ultimate goal of defining the level of risk and reducing it to an acceptable level. A comprehensive framework for gap identification, focus, and metrics has been developed based on principles of continuous risk management and clinical care. Research towards knowledge gaps improves understanding of the likelihood, consequence or timeframe of the risk. Disposition gaps include development of standards or requirements for risk acceptance, development of countermeasures or technology to mitigate the risk, and yearly technology assessment related to watching developments related to the risk. Standard concepts from clinical care: prevention, diagnosis, treatment, monitoring, rehabilitation, and surveillance, can be used to focus gaps dealing with risk mitigation. The research plan for the new HRP Risk of Decompression Sickness (DCS) used the framework to identify one disposition gap related to establishment of a DCS standard for acceptable risk, two knowledge gaps related to DCS phenomenon and mission attributes, and three mitigation gaps focused on prediction, prevention, and new technology watch. These gaps were organized in this manner primarily based on target for closure and ease of organizing interim metrics so that gap status could be quantified. Additional considerations for the knowledge gaps were that one was highly design reference mission specific and the other gap was focused on DCS phenomenon.

Identifying Basic Factors for Communal Prosperity - Space Technologies are Bridging this Gap

Science.gov (United States)

Habib, Shahid

2006-01-01

There are many aspects, which are important for maintaining environmentally clean and safe conditions for a healthy and economically self-sufficient community. This problem was somewhat of a lesser concern in earlier days because many communities were small, isolated and solely dependent upon their owners or landlords. Due to an astronomical growth in human population within the last century, extensive use of combustion technologies, and changing environmental conditions has resulted in scarcity of natural resources. In reality, the societal sustainability issues are becoming much more acute and complex. Therefore, the researchers and social scientists are joining forces to address these topics and find solutions to many contentious areas such as public health and diseases, water resources, agriculture production, survivability during and after the natural disasters, energy needs and many others. Forthrightly speaking, there is no canned solution or a methodology to go about solving these issues since the magnitude and complexity of these issues are multi-dimensional and are further inter-locked with other areas. A common sense tells us that we need data, resources and technologies to begin addressing these problems. This is where space observations have provided us with tremendous information and opportunities, which are of great assets to the science, economist, and social scientists. This paper specifically addresses what are critical areas for a successful societal sustainability and growth; and how can we take advantage of multiple sensors and models already in existence. Increasing our knowledge of the home planet, via amplified set of observations, is certainly a right step in a right direction. Furthermore, this is a pre-requisite in understanding multiple hazard phenomena's. This paper further examines various space sensors and observing architectures that can be useful specifically in addressing some of these complex issues. The ultimate goal is to serve

Reactor Safety Gap Evaluation of Accident Tolerant Components and Severe Accident Analysis

International Nuclear Information System (INIS)

Farmer, Mitchell T.; Bunt, R.; Corradini, M.; Ellison, Paul B.; Francis, M.; Gabor, John D.; Gauntt, R.; Henry, C.; Linthicum, R.; Luangdilok, W.; Lutz, R.; Paik, C.; Plys, M.; Rabiti, Cristian; Rempe, J.; Robb, K.; Wachowiak, R.

2015-01-01

The overall objective of this study was to conduct a technology gap evaluation on accident tolerant components and severe accident analysis methodologies with the goal of identifying any data and/or knowledge gaps that may exist, given the current state of light water reactor (LWR) severe accident research, and additionally augmented by insights obtained from the Fukushima accident. The ultimate benefit of this activity is that the results can be used to refine the Department of Energy's (DOE) Reactor Safety Technology (RST) research and development (R&D) program plan to address key knowledge gaps in severe accident phenomena and analyses that affect reactor safety and that are not currently being addressed by the industry or the Nuclear Regulatory Commission (NRC).

Reactor Safety Gap Evaluation of Accident Tolerant Components and Severe Accident Analysis

Energy Technology Data Exchange (ETDEWEB)

Farmer, Mitchell T. [Argonne National Lab. (ANL), Argonne, IL (United States); Bunt, R. [Southern Nuclear, Atlanta, GA (United States); Corradini, M. [Univ. of Wisconsin, Madison, WI (United States); Ellison, Paul B. [GE Power and Water, Duluth, GA (United States); Francis, M. [Argonne National Lab. (ANL), Argonne, IL (United States); Gabor, John D. [Erin Engineering, Walnut Creek, CA (United States); Gauntt, R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Henry, C. [Fauske and Associates, Burr Ridge, IL (United States); Linthicum, R. [Exelon Corp., Chicago, IL (United States); Luangdilok, W. [Fauske and Associates, Burr Ridge, IL (United States); Lutz, R. [PWR Owners Group (PWROG); Paik, C. [Fauske and Associates, Burr Ridge, IL (United States); Plys, M. [Fauske and Associates, Burr Ridge, IL (United States); Rabiti, Cristian [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rempe, J. [Rempe and Associates LLC, Idaho Falls, ID (United States); Robb, K. [Argonne National Lab. (ANL), Argonne, IL (United States); Wachowiak, R. [Electric Power Research Inst. (EPRI), Knovville, TN (United States)

2015-01-31

The overall objective of this study was to conduct a technology gap evaluation on accident tolerant components and severe accident analysis methodologies with the goal of identifying any data and/or knowledge gaps that may exist, given the current state of light water reactor (LWR) severe accident research, and additionally augmented by insights obtained from the Fukushima accident. The ultimate benefit of this activity is that the results can be used to refine the Department of Energy’s (DOE) Reactor Safety Technology (RST) research and development (R&D) program plan to address key knowledge gaps in severe accident phenomena and analyses that affect reactor safety and that are not currently being addressed by the industry or the Nuclear Regulatory Commission (NRC).

Physics of the Cosmos Program Annual Technology Report

Science.gov (United States)

Pham, Bruce Thai; Cardiff, Ann H.

2015-01-01

What's in this Report? What's New? This fifth Program Annual Technology Report (PATR) summarizes the Programs technology development activities for fiscal year (FY) 2015. The PATR serves four purposes.1. Summarize the technology gaps identified by the astrophysics community;2. Present the results of this years technology gap prioritization by the PCOS Technology Management Board (TMB);3. Report on newly funded PCOS Strategic Astrophysics Technology (SAT) projects; and4. Detail progress, current status, and activities planned for the coming year for all technologies supported by PCOS Supporting Research and Technology (SRT) funding in FY 2015. .

Gaps, barriers and conceptual chasms: theories of technology transfer and energy in buildings

Energy Technology Data Exchange (ETDEWEB)

Shove, E. [University of Lancaster (United Kingdom). Centre for the Study of Environmental Change

1998-12-01

Having shown how much energy might be saved through the use of economically worthwhile measures and technologies, researchers and policy makers then find themselves trying to close the gap between current practice and recognised technical potential. The ensuing process of technology transfer is often seen as a process of overcoming 'non technical barriers' which inhibit the realisation of proven technical potential. This familiar approach depends upon a strong conceptual distinction between the social, on the one hand, and the technical, on the other. But does it make sense to talk of technical potential in the abstract? Do people really have technologies 'transferred' upon them? Drawing upon ideas from the sociology of science and technology and on recent research funded by Britain's Economic and Social Research Council, this paper unpacks conventional beliefs about the diffusion of energy efficient technologies and suggests an alternative approach which acknowledges the social structuring of technical innovation. (author)

Exploring the Theory-Practice Gap: Applications to Health Information Management/Technology Education and Training

Science.gov (United States)

Green, Zakevia Denise

2013-01-01

Although research on the theory-practice gap is available across multiple disciplines, similar studies focusing on the profession of health information management/technology (HIM/T) are not yet available. The projected number of qualified HIM/T needed with advanced skills and training suggests that skillful use of electronic health records (EHR)…

Using a research framework to identify knowledge gaps in research on food marketing to children in Australia.

Science.gov (United States)

Chapman, Kathy; Kelly, Bridget; King, Lesley

2009-06-01

Research in the field of food marketing to children requires a better understanding of the research gaps in order to inform policy development. The purpose of this paper was to propose a framework for classifying food marketing research, using Australian research on food marketing to children to demonstrate how this framework can be used to determine knowledge gaps. A literature review of research databases and 'grey' material was conducted to identify research from the previous 10 years. Studies were classified according to their research focus, and media type, as either: exposure, including content analyses; effects of exposure, including opinions, attitudes and actions resulting from food marketing exposure; regulations, including the type and level of regulation that applies to food marketing; or breaches of regulations, including instances where marketing regulations have been violated. The majority of Australian research on food marketing to children has focused on television advertising and exposure research. Research has consistently shown that the content of food marketing directed at children is predominately for unhealthy foods. There is a lack of research on the effects of food marketing, which would be valuable to inform policy. The development of a logical framework for food marketing research allows for the identification of research gaps and enables research priorities to be identified.

Mitigating the Mathematical Knowledge Gap between High School and First Year University Chemical Engineering Mathematics Course

Science.gov (United States)

Basitere, Moses; Ivala, Eunice

2015-01-01

This paper reports on a study carried out at a University of Technology, South Africa, aimed at identifying the existence of the mathematical knowledge gap and evaluating the intervention designed to bridge the knowledge gap amongst students studying first year mathematics at the Chemical Engineering Extended Curriculum Program (ECP). In this…

Planetary Protection Knowledge Gaps for Human Extraterrestrial Missions: Workshop Report

Science.gov (United States)

Race, Margaret S. (Editor); Johnson, James E. (Editor); Spry, James A. (Editor); Siegel, Bette; Conley, Catharine A.

2015-01-01

This report on Planetary Protection Knowledge Gaps for Human Extraterrestrial Missions summarizes the presentations, deliberations and findings of a workshop at NASA Ames Research Center, March 24-26, 2015, which was attended by more than 100 participants representing a diverse mix of science, engineering, technology, and policy areas. The main objective of the three-day workshop was to identify specific knowledge gaps that need to be addressed to make incremental progress towards the development of NASA Procedural Requirements (NPRs) for Planetary Protection during human missions to Mars.

Identifying knowledge gaps for gene drive research to control invasive animal species: The next CRISPR step

Directory of Open Access Journals (Sweden)

Dorian Moro

2018-01-01

Full Text Available Invasive animals have been linked to the extinctions of native wildlife, and to significant agricultural financial losses or impacts. Current approaches to control invasive species require ongoing resources and management over large geographic scales, and often result in the short-term suppression of populations. New and innovative approaches are warranted. Recently, the RNA guided gene drive system based on CRISPR/Cas9 is being proposed as a potential gene editing tool that could be used by wildlife managers as a non-lethal addition or alternative to help reduce pest animal populations. While regulatory control and social acceptance are crucial issues that must be addressed, there is an opportunity now to identify the knowledge and research gaps that exist for some important invasive species. Here we systematically determine the knowledge gaps for pest species for which gene drives could potentially be applied. We apply a conceptual ecological risk framework within the gene drive context within an Australian environment to identify key requirements for undertaking work on seven exemplar invasive species in Australia. This framework allows an evaluation of the potential research on an invasive species of interest and within a gene drive and risk context. We consider the currently available biological, genetic and ecological information for the house mouse, European red fox, feral cat, European rabbit, cane toad, black rat and European starling to evaluate knowledge gaps and identify candidate species for future research. We discuss these findings in the context of future thematic areas of research worth pursuing in preparation for a more formal assessment of the use of gene drives as a novel strategy for the control of these and other invasive species. Keywords: Invasive species, Gene drive, CRISPR, Pest management, Islands

Top IS research on quality of transaction standards: a structured literature review to identify a research gap

NARCIS (Netherlands)

Folmer, E.J.A.; Berends, W.; Oude Luttighuis, P.; Hillegersberg, J. van

2009-01-01

This paper contains the results of a systematic literature review executed to determine the coverage of transaction standards in top information systems (IS) and management journals. Specifically, it aims to identify a research gap with respect to this topic. The top 25 journals are thoroughly

Policy gaps and technological deficiencies in social networking environments: Implications for information sharing

Directory of Open Access Journals (Sweden)

Stephen M. Mutula

2013-06-01

Full Text Available Background: With the growing adoption and acceptance of social networking, there are increased concerns about the violation of the users’ legitimate rights such as privacy, confidentiality, trust, security, safety, content ownership, content accuracy, integrity, access and accessibility to computer and digital networks amongst others.Objectives: The study sought to investigate the following research objectives to: (1 describe the types of social networks, (2 examine global penetration of the social networks, (3 outline the users’ legitimate rights that must be protected in the social networking sites (SNS, (4 determine the methods employed by SNS to protect the users’ legitimate rights and (5 identify the policy gaps and technological deficiencies in the protection of the users’ legitimate rights in the SNS.Method: A literature survey and content analysis of the SNS user policies were used to address objective four and objective five respectively.Results: The most actively used sites were Facebook and Twitter. Asian markets were leading in participation and in creating content than any other region. Business, education, politics and governance sectors were actively using social networking sites. Social networking sites relied upon user trust and internet security features which however, were inefficient and inadequate.Conclusion: Whilst SNS were impacting people of varying ages and of various professional persuasions, there were increased concerns about the violation and infringement of the users’ legitimate rights. Reliance on user trust and technological security features SNS to protect the users’ legitimate rights seemed ineffectual and inadequate.

Research gaps identified during systematic reviews of clinical trials: glass-ionomer cements.

Science.gov (United States)

Mickenautsch, Steffen

2012-06-29

To report the results of an audit concerning research gaps in clinical trials that were accepted for appraisal in authored and published systematic reviews regarding the application of glass-ionomer cements (GIC) in dental practice Information concerning research gaps in trial precision was extracted, following a framework that included classification of the research gap reasons: 'imprecision of information (results)', 'biased information', 'inconsistency or unknown consistency' and 'not the right information', as well as research gap characterization using PICOS elements: population (P), intervention (I), comparison (C), outcomes (O) and setting (S). Internal trial validity assessment was based on the understanding that successful control for systematic error cannot be assured on the basis of inclusion of adequate methods alone, but also requires empirical evidence about whether such attempt was successful. A comprehensive and interconnected coverage of GIC-related clinical topics was established. The most common reasons found for gaps in trial precision were lack of sufficient trials and lack of sufficient large sample size. Only a few research gaps were ascribed to 'Lack of information' caused by focus on mainly surrogate trial outcomes. According to the chosen assessment criteria, a lack of adequate randomisation, allocation concealment and blinding/masking in trials covering all reviewed GIC topics was noted (selection- and detection/performance bias risk). Trial results appear to be less affected by loss-to-follow-up (attrition bias risk). This audit represents an adjunct of the systematic review articles it has covered. Its results do not change the systematic review's conclusions but highlight existing research gaps concerning the precision and internal validity of reviewed trials in detail. These gaps should be addressed in future GIC-related clinical research.

Identifying Gaps and Launching Resident Wellness Initiatives: The 2017 Resident Wellness Consensus Summit.

Science.gov (United States)

Zaver, Fareen; Battaglioli, Nicole; Denq, William; Messman, Anne; Chung, Arlene; Lin, Michelle; Liu, Emberlynn L

2018-03-01

Burnout, depression, and suicidality among residents of all specialties have become a critical focus for the medical education community, especially among learners in graduate medical education. In 2017 the Accreditation Council for Graduate Medical Education (ACGME) updated the Common Program Requirements to focus more on resident wellbeing. To address this issue, one working group from the 2017 Resident Wellness Consensus Summit (RWCS) focused on wellness program innovations and initiatives in emergency medicine (EM) residency programs. Over a seven-month period leading up to the RWCS event, the Programmatic Initiatives workgroup convened virtually in the Wellness Think Tank, an online, resident community consisting of 142 residents from 100 EM residencies in North America. A 15-person subgroup (13 residents, two faculty facilitators) met at the RWCS to develop a public, central repository of initiatives for programs, as well as tools to assist programs in identifying gaps in their overarching wellness programs. An online submission form and central database of wellness initiatives were created and accessible to the public. Wellness Think Tank members collected an initial 36 submissions for the database by the time of the RWCS event. Based on general workplace, needs-assessment tools on employee wellbeing and Kern's model for curriculum development, a resident-based needs-assessment survey and an implementation worksheet were created to assist residency programs in wellness program development. The Programmatic Initiatives workgroup from the resident-driven RWCS event created tools to assist EM residency programs in identifying existing initiatives and gaps in their wellness programs to meet the ACGME's expanded focus on resident wellbeing.

Gap Assessment in the Emergency Response Community

Energy Technology Data Exchange (ETDEWEB)

Barr, Jonathan L.; Burtner, Edwin R.; Pike, William A.; Peddicord, Annie M Boe; Minsk, Brian S.

2010-09-27

This report describes a gap analysis of the emergency response and management (EM) community, performed during the fall of 2009. Pacific Northwest National Laboratory (PNNL) undertook this effort to identify potential improvements to the functional domains in EM that could be provided by the application of current or future technology. To perform this domain-based gap analysis, PNNL personnel interviewed subject matter experts (SMEs) across the EM domain; to make certain that the analyses reflected a representative view of the community, the SMEs were from a variety of geographic areas and from various sized communities (urban, suburban, and rural). PNNL personnel also examined recent and relevant after-action reports and U.S. Government Accountability Office reports.

Identifying and assessing the factors affecting skill gap in digital marketing in communication industry companies

OpenAIRE

Ghotbifar, Fereshteh; Marjani, Mohammad Reza; Ramazani, Abbas

2017-01-01

As far as new communication channels are concerned, there have been extensive developments in communications and marketing in digital era. Today, therefore, companies try to take advantage of digital marketing channels to provide suitable services to customers to improve their satisfaction level. However, this study aimed to identify and assess factors affecting skill gap in digital marketing. This was descriptive correlation study. The population consisted of experts in communications indust...

Research gaps identified during systematic reviews of clinical trials: glass-ionomer cements

Directory of Open Access Journals (Sweden)

Mickenautsch Steffen

2012-06-01

Full Text Available Abstract Background To report the results of an audit concerning research gaps in clinical trials that were accepted for appraisal in authored and published systematic reviews regarding the application of glass-ionomer cements (GIC in dental practice Methods Information concerning research gaps in trial precision was extracted, following a framework that included classification of the research gap reasons: ‘imprecision of information (results’, ‘biased information’, ‘inconsistency or unknown consistency’ and ‘not the right information’, as well as research gap characterization using PICOS elements: population (P, intervention (I, comparison (C, outcomes (O and setting (S. Internal trial validity assessment was based on the understanding that successful control for systematic error cannot be assured on the basis of inclusion of adequate methods alone, but also requires empirical evidence about whether such attempt was successful. Results A comprehensive and interconnected coverage of GIC-related clinical topics was established. The most common reasons found for gaps in trial precision were lack of sufficient trials and lack of sufficient large sample size. Only a few research gaps were ascribed to ‘Lack of information’ caused by focus on mainly surrogate trial outcomes. According to the chosen assessment criteria, a lack of adequate randomisation, allocation concealment and blinding/masking in trials covering all reviewed GIC topics was noted (selection- and detection/performance bias risk. Trial results appear to be less affected by loss-to-follow-up (attrition bias risk. Conclusion This audit represents an adjunct of the systematic review articles it has covered. Its results do not change the systematic review’s conclusions but highlight existing research gaps concerning the precision and internal validity of reviewed trials in detail. These gaps should be addressed in future GIC-related clinical research.

A Study of Scientometric Methods to Identify Emerging Technologies

Energy Technology Data Exchange (ETDEWEB)

Abercrombie, Robert K [ORNL; Udoeyop, Akaninyene W [ORNL

2011-01-01

This work examines a scientometric model that tracks the emergence of an identified technology from initial discovery (via original scientific and conference literature), through critical discoveries (via original scientific, conference literature and patents), transitioning through Technology Readiness Levels (TRLs) and ultimately on to commercial application. During the period of innovation and technology transfer, the impact of scholarly works, patents and on-line web news sources are identified. As trends develop, currency of citations, collaboration indicators, and on-line news patterns are identified. The combinations of four distinct and separate searchable on-line networked sources (i.e., scholarly publications and citation, worldwide patents, news archives, and on-line mapping networks) are assembled to become one collective network (a dataset for analysis of relations). This established network becomes the basis from which to quickly analyze the temporal flow of activity (searchable events) for the example subject domain we investigated.

SRTC - Gap Analysis Table

International Nuclear Information System (INIS)

M.L. Johnson

2005-01-01

The purpose of this document is to review the existing SRTC design against the ''Nuclear Safety Design Bases for License Application'' (NSDB) [Ref. 10] requirements and to identify codes and standards and supplemental requirements to meet these requirements. If these codes and standards and supplemental requirements can not fully meet these safety requirements then a ''gap'' is identified. These gaps will be identified here and addressed using the ''Site Rail Transfer Cart (SRTC) Design Development Plan'' [Ref. 14]. The codes and standards, supplemental requirements, and design development requirements are provided in the SRTC and associated rails gap analysis table in Appendix A. Because SRTCs are credited with performing functions important to safety (ITS) in the NSDB [Ref. 10], design basis requirements are applicable to ensure equipment is available and performs required safety functions when needed. The gap analysis table is used to identify design objectives and provide a means to satisfy safety requirements. To ensure that the SRTC and rail design perform required safety Functions and meet performance criteria, this portion of the gap analysis table supplies codes and standards sections and the supplemental requirements and identifies design development requirements, if needed

Gaps in Management Education: A Case Study of University of Management and Technology

Science.gov (United States)

Abdur-Raouf; Kalim, Rukhsana; Siddiqi, Ahmed F.

2010-01-01

This paper aims to identify the gaps in management education highlighted by 3 primary stakeholders: students, faculty and alumni. The study tries to address the issue of relevance and compatibility of management education and investigates areas of improvement perceived by respondents. The paper assumes that business departments of universities…

A Case Study in Effectively Bridging the Business Skills Gap for the Information Technology Professional

Science.gov (United States)

Gorman, Michael F.

2011-01-01

A longitudinal study of information technology (IT) managers at a Fortune 200 company in the Southwest United States was conducted to assess the effectiveness of a training program at bridging the perceived business skills gap for IT employees. A needs assessment was carried out, resulting in a 4-module training program. The program was evaluated…

Identifying Gaps and Launching Resident Wellness Initiatives: The 2017 Resident Wellness Consensus Summit

Directory of Open Access Journals (Sweden)

Nicole Battaglioli

2018-02-01

Full Text Available Introduction: Burnout, depression, and suicidality among residents of all specialties have become a critical focus for the medical education community, especially among learners in graduate medical education. In 2017 the Accreditation Council for Graduate Medical Education (ACGME updated the Common Program Requirements to focus more on resident wellbeing. To address this issue, one working group from the 2017 Resident Wellness Consensus Summit (RWCS focused on wellness program innovations and initiatives in emergency medicine (EM residency programs. Methods: Over a seven-month period leading up to the RWCS event, the Programmatic Initiatives workgroup convened virtually in the Wellness Think Tank, an online, resident community consisting of 142 residents from 100 EM residencies in North America. A 15-person subgroup (13 residents, two faculty facilitators met at the RWCS to develop a public, central repository of initiatives for programs, as well as tools to assist programs in identifying gaps in their overarching wellness programs. Results: An online submission form and central database of wellness initiatives were created and accessible to the public. Wellness Think Tank members collected an initial 36 submissions for the database by the time of the RWCS event. Based on general workplace, needs-assessment tools on employee wellbeing and Kern’s model for curriculum development, a resident-based needs-assessment survey and an implementation worksheet were created to assist residency programs in wellness program development. Conclusion: The Programmatic Initiatives workgroup from the resident-driven RWCS event created tools to assist EM residency programs in identifying existing initiatives and gaps in their wellness programs to meet the ACGME’s expanded focus on resident wellbeing.

Learning in context: identifying gaps in research on the transfer of medical communication skills to the clinical workplace.

NARCIS (Netherlands)

Eertwegh, V. van den; Dulmen, S. van; Dalen, J. van; Scherpbier, A.J.J.A.; Vleuten, C.P.M. van der

2013-01-01

Objective: In order to reduce the inconsistencies of findings and the apparent low transfer of communication skills from training to medical practice, this narrative review identifies some main gaps in research on medical communication skills training and presents insights from theories on learning

Learning in context: identifying gaps in research on the transfer of medical communication skills to the clinical workplace

NARCIS (Netherlands)

Eertwegh, V. van den; Dulmen, S. van; Dalen, J. Van; Scherpbier, A.J.J.A.; Vleuten, C.P.M. van der

2013-01-01

OBJECTIVE: In order to reduce the inconsistencies of findings and the apparent low transfer of communication skills from training to medical practice, this narrative review identifies some main gaps in research on medical communication skills training and presents insights from theories on learning

Gap Resolution

Energy Technology Data Exchange (ETDEWEB)

2017-04-25

Gap Resolution is a software package that was developed to improve Newbler genome assemblies by automating the closure of sequence gaps caused by repetitive regions in the DNA. This is done by performing the follow steps:1) Identify and distribute the data for each gap in sub-projects. 2) Assemble the data associated with each sub-project using a secondary assembler, such as Newbler or PGA. 3) Determine if any gaps are closed after reassembly, and either design fakes (consensus of closed gap) for those that closed or lab experiments for those that require additional data. The software requires as input a genome assembly produce by the Newbler assembler provided by Roche and 454 data containing paired-end reads.

What drives the gender gap in STEM? The SAGA Science, Technology and Innovation Gender Objectives List (STI GOL) as a new approach to linking indicators to STI policies

Energy Technology Data Exchange (ETDEWEB)

Fernandez, E.; Schaaper, M.; Bello, A.

2016-07-01

There is a large imbalance in the participation of women in Science, Technology, Engineering and Mathematics (STEM) fields across all of Latin American countries despite the fact that the region has one of the highest proportions of female researchers worldwide (44% according to UIS statistics). Female researchers face persisting institutional and cultural barriers, which limit the development of their careers and constrains their access to decision-making positions. In this framework, UNESCO has launched the STEM and Gender Advancement (SAGA) project, which has for objective to address the gender gap in STEM fields in all countries at all levels of education and research as well as to promote women’s participation in science. SAGA is a global UNESCO project with the support of the Swedish Government through the Swedish International Development Cooperation Agency (Sida). One of the outcomes of this project is the SAGA Science, Technology and Innovation Gender Objectives List (STI GOL), which is an innovative tool that aids in the identification of gaps in the policy mix. Additionally, the STI GOL configures the conceptual backbone of the SAGA project, by linking gender equality STI policy instruments with indicators. By using the STI GOL, and identifying the gender gaps, policy-makers will be able to implement evidence-based policies in STEM fields. The SAGA STI GOL is a new and innovative way of contributing to the development of effective gender sensitive policies in STI fields, both in education and in the workplace. Likewise, it enables the categorization of STI policies and instruments, with the objective of identifying gaps in the policy mix and aid in the creation and design of evidence-based public policies to promote gender equality. (Author)

IMPROVEMENT OF MANGOSTEEN FARMING AND POSTHARVEST HANDLING STRATEGIES BASED ON GLOBAL GAP STANDARD AT KIARA PEDES, PURWAKARTA DISTRICT

Directory of Open Access Journals (Sweden)

Nanda Erlangga

2012-09-01

Full Text Available The objectives of this research were (1 to determine the value chain of mangosteen at Kiara Pedes Sub district, Purwakarta District, (2 to identify the gap between actual condition at Kiara Pedes and Global GAP standard, (3 to identify internal and external factors that can affect the implementation strategy of Global GAP standards, and (4 to develop alternative strategies that can be applied to improve the system of mangosteen cultivation and post harvest handling based on Global GAP standards. The analytical tools being used in this study were value chain analysis, gap analysis, internal and external factor evaluation (IFE, EFE, IE matrix, SWOT analysis, and quantitative strategic planning matrix (QSPM. Identified primary actors in mangosteen value chain were farmers, middlemen, suppliers, exporters, and local and overseas retailers. Based on IE Matrix and SWOT analysis, the strategies to implement Global GAP standards were (a to increase mangosteen productivity and improve its quality by using developed cultivation and postharvest technology, (b to increase productivity, and improve quality and transportation network in accordance with Global GAP standard, (c to improve clean water and post-harvest infrastructure through cooperation with exporters and financial institutions, and (d to improve warehouse and supporting facilities such as packaging and sanitation according to the Global GAP standard for minimizing the environmental constraints. The most priority strategies from the QSPM analysis were improving clean water and post-harvest infrastructure through cooperation with exporters and financial institutions, followed by using the developed cultivation and postharvest technology to increase mangosteen productivity and improve its quality.Keywords: Mangosteen, Global GAP Standard, Value Chain, Improvement Strategies, Farming and Postharvest Handling Practices

Human strongyloidiasis: identifying knowledge gaps, with emphasis on environmental control

Directory of Open Access Journals (Sweden)

Taylor MJ

2014-08-01

Full Text Available Michael J Taylor, Tara A Garrard, Francis J O'Donahoo, Kirstin E Ross Health and Environment, School of the Environment, Flinders University, Adelaide, SA, Australia Abstract: Strongyloides is a human parasitic nematode that is poorly understood outside a clinical context. This article identifies gaps within the literature, with particular emphasis on gaps that are hindering environmental control of Strongyloides. The prevalence and distribution of Strongyloides is unclear. An estimate of 100–370 million people infected worldwide has been proposed; however, inaccuracy of diagnosis, unreliability of prevalence mapping, and the fact that strongyloidiasis remains a neglected disease suggest that the higher figure of more than 300 million cases is likely to be a more accurate estimate. The complexity of Strongyloides life cycle means that laboratory cultures cannot be maintained outside of a host. This currently limits the range of laboratory-based research, which is vital to controlling Strongyloides through environmental alteration or treatment. Successful clinical treatment with antihelminthic drugs has meant that controlling Strongyloides through environmental control, rather than clinical intervention, has been largely overlooked. These control measures may encompass alteration of the soil environment through physical means, such as desiccation or removal of nutrients, or through chemical or biological agents. Repeated antihelminthic treatment of individuals with recurrent strongyloidiasis has not been observed to result in the selection of resistant strains; however, this has not been explicitly demonstrated, and relying on such assumptions in the long-term may prove to be shortsighted. It is ultimately naive to assume that continued administration of antihelminthics will be without any negative long-term effects. In Australia, strongyloidiasis primarily affects Indigenous communities, including communities from arid central Australia. This

Carbon emissions reductions and technology gaps in the world's factory, 1990–2012

International Nuclear Information System (INIS)

Zhang, Ning; Wang, Bing; Chen, Zhongfei

2016-01-01

China's manufacturing industries are traditionally energy-intensive sectors and are responsible for over half of the country's total CO_2 emissions. In this paper, we propose a global meta-frontier non-radial directional distance function approach to measure the CO_2 emissions performance of Chinese manufacturing sectors during the period of 1990–2012. This approach allows us to simultaneously consider technological heterogeneity in manufacturing, non-radial slacks, and undesirable outputs. The global level of environmental technology is incorporated into the efficiency model to improve discriminating power and comparability. The results indicate significant differences in CO_2-emissions-reduction performance among five broad groups of Chinese manufacturing industries. The “global technologies/ innovators group” is the most efficient under meta-frontier technologies, with the smallest technology gap. Meanwhile, the “energy-/resource-intensive commodities group” is, on average, the least efficient. Therefore, the Chinese government should implement targeted policies that encourage firms in the global technologies/innovators group to increase market share while supporting those in the energy-/resource-intensive commodities group to upgrade their technologies. - Highlights: • Global meta-frontier non-radial directional distance function approach is proposed. • It measures CO_2 emissions performance of Chinese manufacturing during 1990–2012. • The impact of group heterogeneity is incorporated. • Global technologies/innovators group is the most efficient under meta-frontier. • Energy-/resource-intensive commodities group is, on average, the least efficient.

Identifying 21st Century STEM Competencies Using Workplace Data

Science.gov (United States)

Jang, Hyewon

2016-01-01

Gaps between science, technology, engineering, and mathematics (STEM) education and required workplace skills have been identified in industry, academia, and government. Educators acknowledge the need to reform STEM education to better prepare students for their future careers. We pursue this growing interest in the skills needed for STEM…

The technology gap and efficiency measure in WEC countries: Application of the hybrid meta frontier model

International Nuclear Information System (INIS)

Chiu, Yung-Ho; Lee, Jen-Hui; Lu, Ching-Cheng; Shyu, Ming-Kuang; Luo, Zhengying

2012-01-01

This study develops the hybrid meta frontier DEA model for which inputs are distinguished into radial inputs that change proportionally and non-radial inputs that change non-proportionally, in order to measure the technical efficiency and technology gap ratios (TGR) of four different regions: Asia, Africa, America, and Europe. This paper selects 87 countries that are members of the World Energy Council from 2005 to 2007. The input variables are industry and population, while the output variances are gross domestic product (GDP) and the amount of fossil-fuel CO 2 emissions. The result shows that countries’ efficiency ranking among their own region presents more implied volatility. In view of the Technology Gap Ratio, Europe is the most efficient of any region, but during the same period, Asia has a lower efficiency than other regions. Finally, regions with higher industry (or GDP) might not have higher efficiency from 2005 to 2007. And higher CO 2 emissions or population also might not mean lower efficiency for other regions. In addition, Brazil is not OECD member, but it is higher efficiency than other OECD members in emerging countries case. OECD countries are better efficiency than non-OECD countries and Europe is higher than Asia to control CO 2 emissions. If non-OECD countries or Asia countries could reach the best efficiency score, they should try to control CO 2 emissions. - Highlights: ► The new meta frontier Model for evaluating the efficiency and technology gap ratios. ► Higher CO 2 emissions might not lower efficiency than any other regions, like Europe. ► Asia’s output and CO 2 emissions simultaneously increased and lower of its efficiency. ► Non-OECD or Asia countries should control CO 2 emissions to reach best efficiency score.

Spinal Cord Injury Clinical Registries: Improving Care across the SCI Care Continuum by Identifying Knowledge Gaps.

Science.gov (United States)

Dvorak, Marcel F; Cheng, Christiana L; Fallah, Nader; Santos, Argelio; Atkins, Derek; Humphreys, Suzanne; Rivers, Carly S; White, Barry A B; Ho, Chester; Ahn, Henry; Kwon, Brian K; Christie, Sean; Noonan, Vanessa K

2017-10-15

Timely access and ongoing delivery of care and therapeutic interventions is needed to maximize recovery and function after traumatic spinal cord injury (tSCI). To ensure these decisions are evidence-based, access to consistent, reliable, and valid sources of clinical data is required. The Access to Care and Timing Model used data from the Rick Hansen SCI Registry (RHSCIR) to generate a simulation of healthcare delivery for persons after tSCI and to test scenarios aimed at improving outcomes and reducing the economic burden of SCI. Through model development, we identified knowledge gaps and challenges in the literature and current health outcomes data collection throughout the continuum of SCI care. The objectives of this article were to describe these gaps and to provide recommendations for bridging them. Accurate information on injury severity after tSCI was hindered by difficulties in conducting neurological assessments and classifications of SCI (e.g., timing), variations in reporting, and the lack of a validated SCI-specific measure of associated injuries. There was also limited availability of reliable data on patient factors such as multi-morbidity and patient-reported measures. Knowledge gaps related to structures (e.g., protocols) and processes (e.g., costs) at each phase of care have prevented comprehensive evaluation of system performance. Addressing these knowledge gaps will enhance comparative and cost-effectiveness evaluations to inform decision-making and standards of care. Recommendations to do so were: standardize data element collection and facilitate database linkages, validate and adopt more outcome measures for SCI, and increase opportunities for collaborations with stakeholders from diverse backgrounds.

Mind the Gap

Science.gov (United States)

Fairbanks, Terry; Savage, Erica; Adams, Katie; Wittie, Michael; Boone, Edna; Hayden, Andrew; Barnes, Janey; Hettinger, Zach; Gettinger, Andrew

2016-01-01

Summary Objective Decisions made during electronic health record (EHR) implementations profoundly affect usability and safety. This study aims to identify gaps between the current literature and key stakeholders’ perceptions of usability and safety practices and the challenges encountered during the implementation of EHRs. Materials and Methods Two approaches were used: a literature review and interviews with key stakeholders. We performed a systematic review of the literature to identify usability and safety challenges and best practices during implementation. A total of 55 articles were reviewed through searches of PubMed, Web of Science and Scopus. We used a qualitative approach to identify key stakeholders’ perceptions; semi-structured interviews were conducted with a diverse set of health IT stakeholders to understand their current practices and challenges related to usability during implementation. We used a grounded theory approach: data were coded, sorted, and emerging themes were identified. Conclusions from both sources of data were compared to identify areas of misalignment. Results We identified six emerging themes from the literature and stakeholder interviews: cost and resources, risk assessment, governance and consensus building, customization, clinical work-flow and usability testing, and training. Across these themes, there were misalignments between the literature and stakeholder perspectives, indicating major gaps. Discussion Major gaps identified from each of six emerging themes are discussed as critical areas for future research, opportunities for new stakeholder initiatives, and opportunities to better disseminate resources to improve the implementation of EHRs. Conclusion Our analysis identified practices and challenges across six different emerging themes, illustrated important gaps, and results suggest critical areas for future research and dissemination to improve EHR implementation. PMID:27847961

Awareness of technology-induced errors and processes for identifying and preventing such errors.

Science.gov (United States)

Bellwood, Paule; Borycki, Elizabeth M; Kushniruk, Andre W

2015-01-01

There is a need to determine if organizations working with health information technology are aware of technology-induced errors and how they are addressing and preventing them. The purpose of this study was to: a) determine the degree of technology-induced error awareness in various Canadian healthcare organizations, and b) identify those processes and procedures that are currently in place to help address, manage, and prevent technology-induced errors. We identified a lack of technology-induced error awareness among participants. Participants identified there was a lack of well-defined procedures in place for reporting technology-induced errors, addressing them when they arise, and preventing them.

Technography and Design-Actuality Gap-Analysis of Internet Computer Technologies-Assisted Education: Western Expectations and Global Education

Science.gov (United States)

Greenhalgh-Spencer, Heather; Jerbi, Moja

2017-01-01

In this paper, we provide a design-actuality gap-analysis of the internet infrastructure that exists in developing nations and nations in the global South with the deployed internet computer technologies (ICT)-assisted programs that are designed to use internet infrastructure to provide educational opportunities. Programs that specifically…

The Adaptation Gap Report - a Preliminary Assessment

DEFF Research Database (Denmark)

Alverson, Keith; Olhoff, Anne; Noble, Ian

This first Adaptation Gap report provides an equally sobering assessment of the gap between adaptation needs and reality, based on preliminary thinking on how baselines, future goals or targets, and gaps between them might be defined for climate change adaptation. The report focuses on gaps...... in developing countries in three important areas: finance, technology and knowledge....

Physical Activity in an Underserved Population: Identifying Technology Preferences.

Science.gov (United States)

Medairos, Robert; Kang, Vicky; Aboubakare, Carissa; Kramer, Matthew; Dugan, Sheila Ann

2017-01-01

This study aims to identify patterns of use and preferences related to technology platforms that could support physical activity (PA) programs in an underserved population. A 29-item questionnaire was administered at 5 health and wellness sites targeting low income communities in Chicago. Frequency tables were generated for Internet, cell phone, and social media use and preferences. Chi-squared analysis was used to evaluate differences across age and income groups. A total of 291 individuals participated and were predominantly female (69.0%). Majority reported incomes less than $30,000 (72.9%) and identified as African American/Black/Caribbean (49.3%) or Mexican/Mexican American (34.3%). Most participants regularly used smartphones (63.2%) and the Internet (75.9%). Respondents frequently used Facebook (84.8%), and less commonly used Instagram (43.6%), and Twitter (20.0%). Free Internet-based exercise programs were the most preferred method to increase PA levels (31.6%), while some respondents (21.0%) thought none of the surveyed technology applications would help. Cell phone, Internet, and social media use is common among the surveyed underserved population. Technology preferences to increase PA levels varied, with a considerable number of respondents not preferring the surveyed technology platforms. Creating educational opportunities to increase awareness may maximize the effectiveness of technology-based PA interventions.

Identifying technology innovations for marginalized smallholders-A conceptual approach.

Science.gov (United States)

Malek, Mohammad Abdul; Gatzweiler, Franz W; Von Braun, Joachim

2017-05-01

This paper adds a contribution in the existing literature in terms of theoretical and conceptual background for the identification of idle potentials of marginal rural areas and people by means of technological and institutional innovations. The approach follows ex-ante assessment for identifying suitable technology and institutional innovations for marginalized smallholders in marginal areas-divided into three main parts (mapping, surveying and evaluating) and several steps. Finally, it contributes to the inclusion of marginalized smallholders by an improved way of understanding the interactions between technology needs, farming systems, ecological resources and poverty characteristics in the different segments of the poor, and to link these insights with productivity enhancing technologies.

Ontology of gaps in content-based image retrieval.

Science.gov (United States)

Deserno, Thomas M; Antani, Sameer; Long, Rodney

2009-04-01

Content-based image retrieval (CBIR) is a promising technology to enrich the core functionality of picture archiving and communication systems (PACS). CBIR has a potential for making a strong impact in diagnostics, research, and education. Research as reported in the scientific literature, however, has not made significant inroads as medical CBIR applications incorporated into routine clinical medicine or medical research. The cause is often attributed (without supporting analysis) to the inability of these applications in overcoming the "semantic gap." The semantic gap divides the high-level scene understanding and interpretation available with human cognitive capabilities from the low-level pixel analysis of computers, based on mathematical processing and artificial intelligence methods. In this paper, we suggest a more systematic and comprehensive view of the concept of "gaps" in medical CBIR research. In particular, we define an ontology of 14 gaps that addresses the image content and features, as well as system performance and usability. In addition to these gaps, we identify seven system characteristics that impact CBIR applicability and performance. The framework we have created can be used a posteriori to compare medical CBIR systems and approaches for specific biomedical image domains and goals and a priori during the design phase of a medical CBIR application, as the systematic analysis of gaps provides detailed insight in system comparison and helps to direct future research.

The Use of Technology in Identifying Hospital Malnutrition: Scoping Review.

Science.gov (United States)

Trtovac, Dino; Lee, Joon

2018-01-19

Malnutrition is a condition most commonly arising from the inadequate consumption of nutrients necessary to maintain physiological health and is associated with the development of cardiovascular disease, osteoporosis, and sarcopenia. Malnutrition occurring in the hospital setting is caused by insufficient monitoring, identification, and assessment efforts. Furthermore, the ability of health care workers to identify and recognize malnourished patients is suboptimal. Therefore, interventions focusing on the identification and treatment of malnutrition are valuable, as they reduce the risks and rates of malnutrition within hospitals. Technology may be a particularly useful ally in identifying malnutrition due to scalability, timeliness, and effectiveness. In an effort to explore the issue, this scoping review synthesized the availability of technological tools to detect and identify hospital malnutrition. Our objective was to conduct a scoping review of the different forms of technology used in addressing malnutrition among adults admitted to hospital to (1) identify the extent of the published literature on this topic, (2) describe key findings, and (3) identify outcomes. We designed and implemented a search strategy in 3 databases (PubMed, Scopus, and CINAHL). We completed a descriptive numerical summary and analyzed study characteristics. One reviewer independently extracted data from the databases. We retrieved and reviewed a total of 21 articles. We categorized articles by the computerized tool or app type: malnutrition assessment (n=15), food intake monitoring (n=5), or both (n=1). Within those categories, we subcategorized the different technologies as either hardware (n=4), software (n=13), or both (n=4). An additional subcategory under software was cloud-based apps (n=1). Malnutrition in the acute hospital setting was largely an unrecognized problem, owing to insufficient monitoring, identification, and initial assessments of identifying both patients who are

Customizing Laboratory Information Systems: Closing the Functionality Gap.

Science.gov (United States)

Gershkovich, Peter; Sinard, John H

2015-09-01

Highly customizable laboratory information systems help to address great variations in laboratory workflows, typical in Pathology. Often, however, built-in customization tools are not sufficient to add all of the desired functionality and improve systems interoperability. Emerging technologies and advances in medicine often create a void in functionality that we call a functionality gap. These gaps have distinct characteristics—a persuasive need to change the way a pathology group operates, the general availability of technology to address the missing functionality, the absence of this technology from your laboratory information system, and inability of built-in customization tools to address it. We emphasize the pervasive nature of these gaps, the role of pathology informatics in closing them, and suggest methods on how to achieve that. We found that a large number of the papers in the Journal of Pathology Informatics are concerned with these functionality gaps, and an even larger proportion of electronic posters and abstracts presented at the Pathology Informatics Summit conference each year deal directly with these unmet needs in pathology practice. A rapid, continuous, and sustainable approach to closing these gaps is critical for Pathology to provide the highest quality of care, adopt new technologies, and meet regulatory and financial challenges. The key element of successfully addressing functionality gaps is gap ownership—the ability to control the entire pathology information infrastructure with access to complementary systems and components. In addition, software developers with detailed domain expertise, equipped with right tools and methodology can effectively address these needs as they emerge.

Top IS research on quality of transaction standards: a structured literature review to identify a research gap

OpenAIRE

Folmer, E.J.A.; Berends, W.; Oude Luttighuis, P.; Hillegersberg, J. van

2009-01-01

This paper contains the results of a systematic literature review executed to determine the coverage of transaction standards in top information systems (IS) and management journals. Specifically, it aims to identify a research gap with respect to this topic. The top 25 journals are thoroughly searched and the selected publications are classified in order to make grounded statements. A moderate amount of literature found specifically aims at transaction standards. Hardly any research is found...

Gender Gap in Science, Technology, Engineering, and Mathematics (STEM): Current Knowledge, Implications for Practice, Policy, and Future Directions

Science.gov (United States)

Wang, Ming-Te; Degol, Jessica L.

2017-01-01

Although the gender gap in math course-taking and performance has narrowed in recent decades, females continue to be underrepresented in math-intensive fields of Science, Technology, Engineering, and Mathematics (STEM). Career pathways encompass the ability to pursue a career as well as the motivation to employ that ability. Individual differences…

Assessment of the Cast Stone Low-Temperature Waste Form Technology Coupled with Technetium Removal - 14379

Energy Technology Data Exchange (ETDEWEB)

Brown, Christopher F.; Rapko, Brian M.; Serne, R. Jeffrey; Westsik, Joseph H.; Cozzi, Alex; Fox, Kevin M.; Mccabe, Daniel J.; Nash, C. A.; Wilmarth, William R.

2014-03-03

The U.S. Department of Energy Office of Environmental Management (EM) is engaging the national laboratories to provide the scientific and technological rigor to support EM program and project planning, technology development and deployment, project execution, and assessment of program outcomes. As an early demonstration of this new responsibility, Pacific Northwest National Laboratory (PNNL) and Savannah River National Laboratory (SRNL) were chartered to implement a science and technology program addressing low-temperature waste forms for immobilization of DOE aqueous waste streams, including technetium removal as an implementing technology. As a first step, the laboratories examined the technical risks and uncertainties associated with the Cast Stone waste immobilization and technetium removal projects at Hanford. Science and technology gaps were identified for work associated with 1) conducting performance assessments and risk assessments of waste form and disposal system performance, and 2) technetium chemistry in tank wastes and separation of technetium from waste processing streams. Technical approaches to address the science and technology gaps were identified and an initial sequencing priority was suggested. A subset of research was initiated in 2013 to begin addressing the most significant science and technology gaps. The purpose of this paper is to report progress made towards closing these gaps and provide notable highlights of results achieved to date.

Closing the transatlantic technology gap

NARCIS (Netherlands)

Heerkens, Johannes M.G.

1999-01-01

Looks at how Europe can catch up with the United States in several critical areas of aerospace technology. Creation of a business-friendly atmosphere for civil aviation manufacturers; Promotion of cooperation between aerospace research institutes; Sponsorship of technology demonstrator programs at

Strategies to Address Identified Education Gaps in the Preparation of a National Security Workforce

Energy Technology Data Exchange (ETDEWEB)

None

2008-06-30

This report will discuss strategies available to address identified gaps and weaknesses in education efforts aimed at the preparation of a skilled and properly trained national security workforce.The need to adequately train and educate a national security workforce is at a critical juncture. Even though there are an increasing number of college graduates in the appropriate fields, many of these graduates choose to work in the private sector because of more desirable salary and benefit packages. This is contributing to an inability to fill vacant positions at NNSA resulting from high personnel turnover from the large number of retirements. Further, many of the retirees are practically irreplaceable because they are Cold War scientists that have experience and expertise with nuclear weapons.

The role of new information technology meeting the global need and gap of education in pediatric surgery.

Science.gov (United States)

Ure, Benno; Zoeller, Christoph; Lacher, Martin

2015-06-01

Traditionally, pediatric surgical education consisted of exposure to patients, textbooks, lectures, team-based education, congresses, and workshops. Over the last decades, however, new information technology (IT) and the internet revolutionized the sharing of information and communication. IT has become relevant in particular for the younger generation of pediatric surgeons. Today, gaps in children's health and the quality of pediatric surgical education persist between countries and regions. Advances in health care are not shared equitably. The use of IT for resource libraries, teleconferences, virtual symposiums, and telementoring has great potential in closing this gap and meeting the global needs for pediatric surgical education. This article focuses on the potential role of IT in this respect. Copyright © 2015 Elsevier Inc. All rights reserved.

Enhancing the Employability of Chinese International Students: Identifying Achievements and Gaps in the Research Field

Directory of Open Access Journals (Sweden)

Xuemeng Cao

2017-10-01

Full Text Available This article shows what achievements have been made by existing studies on graduate employability, and what gaps need to be filled in this field. It starts with a retrospective account of the changing concept of employability, followed by a presentation of the practices that have been used to support graduate employability enhancement in different countries. Moreover, this article gives a critical review of Chinese contexts of graduate labour market. Last but not least, limitations of existing studies are identified, which reflect an expectation for future research on graduate employability to meet the demand of an increasingly international dimension of higher education.

River Protection Project Technology and Innovation Roadmap.

Energy Technology Data Exchange (ETDEWEB)

Reid, D. S. [Hanford Site (HNF), Richland, WA (United States); Wooley, T. A. [Hanford Site (HNF), Richland, WA (United States); Kelly, S. E. [Hanford Site (HNF), Richland, WA (United States)

2017-08-14

The Technology and Innovation Roadmap is a planning tool for WRPS management, DOE ORP, DOE EM, and others to understand the risks and technology gaps associated with the RPP mission. The roadmap identifies and prioritizes technical areas that require technology solutions and underscores where timely and appropriate technology development can have the greatest impact to reduce those risks and uncertainties. The roadmap also serves as a tool for determining allocation of resources.

Identifying the gaps: Armenian health care legislation and human rights in patient care protections.

Science.gov (United States)

Zopunyan, Violeta; Krmoyan, Suren; Quinn, Ryan

2013-12-12

Since the collapse of the Soviet Union, the Republic of Armenia has undergone an extensive legislative overhaul. Although a number of developments have aimed to improve the quality and accessibility of Armenia's health care system, a host of factors has prevented the country from fully introducing measures to ensure respect for human rights in patient care. In particular, inadequate health care financing continues to oblige patients to make both formal and informal payments to obtain basic medical care and services. More generally, a lack of oversight and monitoring mechanisms has obstructed the implementation of Armenia's commitments to human rights in several international agreements. Within the framework of a broader project on promoting human rights in patient care, research was carried out to examine Armenia’s health care legislation with the aim of identifying gaps in comparison with international and regional standards. This research was designed using the 14 rights enshrined in the European Charter on Patient Rights as guiding principles, along with domestic legal acts relevant to the rights of health care providers. The gaps analysis revealed numerous problems with Armenian legislation governing the relationships between stakeholders in health care service delivery. It also identified several practical inconsistencies with the international legal instruments ratified by the Armenian government. These legislative shortcomings are illustrated by highlighting key health-related rights violations experienced by patients and their health care providers, and by indicating opportunities for improved rights protections. A full list of human rights relevant to patient care and recommendations for promoting them in the Armenian context is provided in Tables 1 and 2. A number of initiatives must be undertaken in order to promote the full spectrum of human rights in patient care in Armenia. This section highlights certain recommendations flowing from the findings of

Photonic band gap materials: Technology, applications and challenges

International Nuclear Information System (INIS)

Johri, M.; Ahmed, Y.A.; Bezboruah, T.

2006-05-01

Last century has been the age of Artificial Materials. One material that stands out in this regard is the semiconductor. The revolution in electronic industry in the 20th century was made possible by the ability of semiconductors to microscopically manipulate the flow of electrons. Further advancement in the field made scientists suggest that the new millennium will be the age of photonics in which artificial materials will be synthesized to microscopically manipulate the flow of light. One of these will be Photonic Band Gap material (PBG). PBG are periodic dielectric structures that forbid propagation of electromagnetic waves in a certain frequency range. They are able to engineer most fundamental properties of electromagnetic waves such as the laws of refraction, diffraction, and emission of light from atoms. Such PBG material not only opens up variety of possible applications (in lasers, antennas, millimeter wave devices, efficient solar cells photo-catalytic processes, integrated optical communication etc.) but also give rise to new physics (cavity electrodynamics, localization, disorder, photon-number-state squeezing). Unlike electronic micro-cavity, optical waveguides in a PBG microchip can simultaneously conduct hundreds of wavelength channels of information in a three dimensional circuit path. In this article we have discussed some aspects of PBG materials and their unusual properties, which provided a foundation for novel practical applications ranging from clinical medicine to information technology. (author)

Electron Elevator: Excitations across the Band Gap via a Dynamical Gap State.

Science.gov (United States)

Lim, A; Foulkes, W M C; Horsfield, A P; Mason, D R; Schleife, A; Draeger, E W; Correa, A A

2016-01-29

We use time-dependent density functional theory to study self-irradiated Si. We calculate the electronic stopping power of Si in Si by evaluating the energy transferred to the electrons per unit path length by an ion of kinetic energy from 1 eV to 100 keV moving through the host. Electronic stopping is found to be significant below the threshold velocity normally identified with transitions across the band gap. A structured crossover at low velocity exists in place of a hard threshold. An analysis of the time dependence of the transition rates using coupled linear rate equations enables one of the excitation mechanisms to be clearly identified: a defect state induced in the gap by the moving ion acts like an elevator and carries electrons across the band gap.

Constellations of gaps in Eratosthenes sieve

OpenAIRE

Holt, Fred B.

2015-01-01

A few years ago we identified a recursion that works directly with the gaps among the generators in each stage of Eratosthenes sieve. This recursion provides explicit enumerations of sequences of gaps among the generators, which sequences are known as constellations. Over the last year we identified a discrete linear system that exactly models the population of any gap across all stages of the sieve. In August 2014 we summarized our results from analyzing this discrete model on populations of...

Trunnion Collar Removal Machine - Gap Analysis Table

International Nuclear Information System (INIS)

Johnson, M.

2005-01-01

The purpose of this document is to review the existing the trunnion collar removal machine against the ''Nuclear Safety Design Bases for License Application'' (NSDB) [Ref. 10] requirements and to identify codes and standards and supplemental requirements to meet these requirements. If these codes and standards can not fully meet these requirements then a ''gap'' is identified. These gaps will be identified here and addressed using the ''Trunnion Collar Removal Machine Design Development Plan'' [Ref. 15]. The codes and standards, supplemental requirements, and design development requirements for the trunnion collar removal machine are provided in the gap analysis table (Appendix A, Table 1). Because the trunnion collar removal machine is credited with performing functions important to safety (ITS) in the NSDB [Ref. 10], design basis requirements are applicable to ensure equipment is available and performs required safety functions when needed. The gap analysis table is used to identify design objectives and provide a means to satisfy safety requirements. To ensure that the trunnion collar removal machine performs required safety functions and meets performance criteria, this portion of the gap analysis tables supplies codes and standards sections and the supplemental requirements and identifies design development requirements, if needed

Maternal and child health care in an underprivileged area of Bangalore city: Identifying the gaps in the continuum of care

Directory of Open Access Journals (Sweden)

Avita R Johnson

2015-01-01

Full Text Available Background With over 100 million Indians living in urban slums and high child mortality among low-income groups, focusing on maternal and child health (MCH among urban underprivileged is vital, if India is to achieve the fourth and fifth Millennium Development goals. Objectives To identify the gaps in the MCH Continuum of care, by assessing coverage and quality of Maternal and Child Health Services in an urban underprivileged area of Bangalore City. Methods A survey was conducted in an urban slum of Bangalore City, using systematic random sampling. A total of 178 subjects were interviewed with a pre-tested questionnaire. 88 were mothers who delivered in the last one year (to assess maternal care services, and 90 were mothers of a child aged 12-23 months (to assess immunization coverage. Breastfeeding practices and care during childhood illness were documented in both groups. Results Though institutional delivery rate was 97.7%, only 34.1% mothers had received full antenatal care. The quality of antenatal and postnatal services was poor, practices like prelacteal feeds and delayed initiation of breastfeeding were common. Less than 40 % of children were exclusively breastfed for at least 6 months. Only 53% of children aged 12-23 months were fully immunised. Primary immunisation drop-out rates were high. Mothers’ knowledge regarding vaccines was poor. Children with diarrhea received less fluids and food and only 61% received ORS. Conclusion This study identified the following gaps in the MCH Continuum of Care- lack of IFA consumption, poor quality of antenatal and postnatal care, high immunisation dropout rates, erroneous breastfeeding practices and inadequate care during diarrhoea. Further research may identify potential solutions to bridging these gaps in MCH care.

Maternal and child health care in an underprivileged area of Bangalore city: Identifying the gaps in the continuum of care

Directory of Open Access Journals (Sweden)

Avita R Johnson

2015-10-01

Full Text Available Background With over 100 million Indians living in urban slums and high child mortality among low-­‐income groups, focusing on maternal and child health (MCH among urban underprivileged is vital, if India is to achieve the fourth and fifth Millennium Development goals. Objectives To identify the gaps in the MCH Continuum of care, by assessing coverage and quality of Maternal and Child Health Services in an urban underprivileged area of Bangalore City. Methods A survey was conducted in an urban slum of Bangalore City, using systematic random sampling. A total of 178 subjects were interviewed with a pre-­‐tested questionnaire. 88 were mothers who delivered in the last one year (to assess maternal care services, and 90 were mothers of a child aged 12-­‐23 months (to assess immunization coverage. Breastfeeding practices and care during childhood illness were documented in both groups. Results Though institutional delivery rate was 97.7%, only 34.1% mothers had received full antenatal care. The quality of antenatal and postnatal services was poor, practices like prelacteal feeds and delayed initiation of breastfeeding were common. Less than 40 % of children were exclusively breastfed for at least 6 months. Only 53% of children aged 12-­‐23 months were fully immunised. Primary immunisation drop-­‐out rates were high. Mothers’ knowledge regarding vaccines was poor. Children with diarrhea received less fluids and food and only 61% received ORS. Conclusion This study identified the following gaps in the MCH Continuum of Care-­‐ lack of IFA consumption, poor quality of antenatal and postnatal care, high immunisation dropout rates, erroneous breastfeeding practices and inadequate care during diarrhoea. Further research may identify potential solutions to bridging these gaps in MCH care.

GapMis: a tool for pairwise sequence alignment with a single gap.

Science.gov (United States)

Flouri, Tomás; Frousios, Kimon; Iliopoulos, Costas S; Park, Kunsoo; Pissis, Solon P; Tischler, German

2013-08-01

Pairwise sequence alignment has received a new motivation due to the advent of recent patents in next-generation sequencing technologies, particularly so for the application of re-sequencing---the assembly of a genome directed by a reference sequence. After the fast alignment between a factor of the reference sequence and a high-quality fragment of a short read by a short-read alignment programme, an important problem is to find the alignment between a relatively short succeeding factor of the reference sequence and the remaining low-quality part of the read allowing a number of mismatches and the insertion of a single gap in the alignment. We present GapMis, a tool for pairwise sequence alignment with a single gap. It is based on a simple algorithm, which computes a different version of the traditional dynamic programming matrix. The presented experimental results demonstrate that GapMis is more suitable and efficient than most popular tools for this task.

Bridging the Civil Military Gap Capitalizing on Crisis

Science.gov (United States)

2002-01-01

solutions. Researchers identifying the sources of the gap discussed above, have also suggested some methods for reducing the gap . While some are policy...Strategy Research Project DATE: 09 April 2002 PAGES: 42 CLASSIFICATION: Unclassified Researchers have identified a "civil-military gap ," an observable...would indicate a desire by the civilian populous to draw closer to the military, creating an opportunity to close or at least narrow this gap . The media

Research Market Gap in Law Enforcement Technology: Lessons from Czech Security Research Funding Programmes

Directory of Open Access Journals (Sweden)

Luděk Moravec

2014-12-01

Full Text Available While security research funding schemes are nothing new to the EU (Horizon 2020 and FP7, or to several Member States, their priorities and procedures are usually decided administratively or shaped by advisory groups of varying membership. Only recently did the EU shift its focus to the role of end users in security research programmes, seeking their input in order to maximise the utility of funded solutions. Such a hint to limited usefulness of some industrial solutions is not exactly inconspicuous. This paper discusses the gap between the stated needs of law enforcement agencies in terms of R&D funding and the grant project applications in the area of law enforcement. It aims to define and describe the gap, and consequently the market opportunities, between the supply and demand sides represented by industry-driven grant project applications and end-user-formulated calls. The study is based on empirical data from two Czech security research funding programmes that have been running since 2010 and should deliver their results by 2015. It seeks to contribute some preliminary observations about the structure of both end user needs and industry capabilities in such a particular area as law enforcement technology.

Closing yield gaps in China by empowering smallholder farmers

Science.gov (United States)

Zhang, Weifeng; Cao, Guoxin; Li, Xiaolin; Zhang, Hongyan; Wang, Chong; Liu, Quanqing; Chen, Xinping; Cui, Zhenling; Shen, Jianbo; Jiang, Rongfeng; Mi, Guohua; Miao, Yuxin; Zhang, Fusuo; Dou, Zhengxia

2016-09-01

Sustainably feeding the world’s growing population is a challenge, and closing yield gaps (that is, differences between farmers’ yields and what are attainable for a given region) is a vital strategy to address this challenge. The magnitude of yield gaps is particularly large in developing countries where smallholder farming dominates the agricultural landscape. Many factors and constraints interact to limit yields, and progress in problem-solving to bring about changes at the ground level is rare. Here we present an innovative approach for enabling smallholders to achieve yield and economic gains sustainably via the Science and Technology Backyard (STB) platform. STB involves agricultural scientists living in villages among farmers, advancing participatory innovation and technology transfer, and garnering public and private support. We identified multifaceted yield-limiting factors involving agronomic, infrastructural, and socioeconomic conditions. When these limitations and farmers’ concerns were addressed, the farmers adopted recommended management practices, thereby improving production outcomes. In one region in China, the five-year average yield increased from 67.9% of the attainable level to 97.0% among 71 leading farmers, and from 62.8% to 79.6% countywide (93,074 households); this was accompanied by resource and economic benefits.

Strengthening the dementia care triad: identifying knowledge gaps and linking to resources.

Science.gov (United States)

Jensen, Christine J; Inker, Jennifer

2015-05-01

This article describes a project to identify the needs of family caregivers and health care providers caring for persons with dementia. Participants included 128 caregivers, who completed a survey, and 27 health care providers, who participated in a focus group and completed a survey. Caregivers reported their primary source of information about the disease was the doctor; however, the majority also reported they were primarily informed of medications and not about needed resources. Health care providers identified limited time with patients and families, and lack of awareness of community services, as their main challenges. Recommendations include strengthening the partnership between physicians, patients, and caregivers (the dementia care triad) through additional support and training for physicians and caregivers, increasing awareness of the Alzheimer's Association, and utilization of technology for families and professionals to track the needs of persons with dementia. © The Author(s) 2014.

Structural analyses of Legionella LepB reveal a new GAP fold that catalytically mimics eukaryotic RasGAP.

Science.gov (United States)

Yu, Qin; Hu, Liyan; Yao, Qing; Zhu, Yongqun; Dong, Na; Wang, Da-Cheng; Shao, Feng

2013-06-01

Rab GTPases are emerging targets of diverse bacterial pathogens. Here, we perform biochemical and structural analyses of LepB, a Rab GTPase-activating protein (GAP) effector from Legionella pneumophila. We map LepB GAP domain to residues 313-618 and show that the GAP domain is Rab1 specific with a catalytic activity higher than the canonical eukaryotic TBC GAP and the newly identified VirA/EspG family of bacterial RabGAP effectors. Exhaustive mutation analyses identify Arg444 as the arginine finger, but no catalytically essential glutamine residues. Crystal structures of LepB313-618 alone and the GAP domain of Legionella drancourtii LepB in complex with Rab1-GDP-AlF3 support the catalytic role of Arg444, and also further reveal a 3D architecture and a GTPase-binding mode distinct from all known GAPs. Glu449, structurally equivalent to TBC RabGAP glutamine finger in apo-LepB, undergoes a drastic movement upon Rab1 binding, which induces Rab1 Gln70 side-chain flipping towards GDP-AlF3 through a strong ionic interaction. This conformationally rearranged Gln70 acts as the catalytic cis-glutamine, therefore uncovering an unexpected RasGAP-like catalytic mechanism for LepB. Our studies highlight an extraordinary structural and catalytic diversity of RabGAPs, particularly those from bacterial pathogens.

Using hyperspectral imaging technology to identify diseased tomato leaves

Science.gov (United States)

Li, Cuiling; Wang, Xiu; Zhao, Xueguan; Meng, Zhijun; Zou, Wei

2016-11-01

In the process of tomato plants growth, due to the effect of plants genetic factors, poor environment factors, or disoperation of parasites, there will generate a series of unusual symptoms on tomato plants from physiology, organization structure and external form, as a result, they cannot grow normally, and further to influence the tomato yield and economic benefits. Hyperspectral image usually has high spectral resolution, not only contains spectral information, but also contains the image information, so this study adopted hyperspectral imaging technology to identify diseased tomato leaves, and developed a simple hyperspectral imaging system, including a halogen lamp light source unit, a hyperspectral image acquisition unit and a data processing unit. Spectrometer detection wavelength ranged from 400nm to 1000nm. After hyperspectral images of tomato leaves being captured, it was needed to calibrate hyperspectral images. This research used spectrum angle matching method and spectral red edge parameters discriminant method respectively to identify diseased tomato leaves. Using spectral red edge parameters discriminant method produced higher recognition accuracy, the accuracy was higher than 90%. Research results have shown that using hyperspectral imaging technology to identify diseased tomato leaves is feasible, and provides the discriminant basis for subsequent disease control of tomato plants.

The Expanded Large Scale Gap Test

Science.gov (United States)

1987-03-01

NSWC TR 86-32 DTIC THE EXPANDED LARGE SCALE GAP TEST BY T. P. LIDDIARD D. PRICE RESEARCH AND TECHNOLOGY DEPARTMENT ’ ~MARCH 1987 Ap~proved for public...arises, to reduce the spread in the LSGT 50% gap value.) The worst charges, such as those with the highest or lowest densities, the largest re-pressed...Arlington, VA 22217 PE 62314N INS3A 1 RJ14E31 7R4TBK 11 TITLE (Include Security CIlmsilficatiorn The Expanded Large Scale Gap Test . 12. PEIRSONAL AUTHOR() T

Weapons of Mass Destruction Technology Evaluation and Training Range

Energy Technology Data Exchange (ETDEWEB)

Kevin Larry Young

2009-05-01

The Idaho National Laboratory (INL) has a long history for providing technology evaluation and training for military and other federal level Weapons of Mass Destruction (WMD) response agencies. Currently there are many federal organizations and commercial companies developing technologies related to detecting, assessing, mitigating and protecting against hazards associated with a WMD event. Unfortunately, very few locations exist within the United States where WMD response technologies are realistically field tested and evaluated using real chemical, biological, radiological, nuclear and explosive materials. This is particularly true with biological and radiological hazards. Related to this lack of adequate WMD, multi-hazard technology testing capability is the shortage of locations where WMD response teams can train using actual chemical, biological, and radiological material or highly realistic simulates. In response to these technology evaluation and training needs, the INL has assembled a consortium of subject matter experts from existing programs and identified dedicated resources for the purpose of establishing an all-hazards, WMD technology evaluation and training range. The author describes the challenges associated with creating the all-hazards WMD technology evaluation and training range and lists the technical, logistical and financial benefits of an all-hazards technology evaluation and training range. Current resources and capabilities for conducting all-hazard technology evaluation and training at the INL are identified. Existing technology evaluation and training programs at the INL related to radiological, biological and chemical hazards are highlighted, including successes and lessons learned. Finally, remaining gaps in WMD technology evaluation and training capabilities are identified along with recommendations for closing those gaps.

Gap Analysis: Rethinking the Conceptual Foundations

Science.gov (United States)

2008-04-23

there could exist a basis for gap in capability and, therefore, a desire to close the capability gap . What one desires versus what one has is, in...Analysis is not intended to close the space between the most distant extremes or the rarest occurrences. Rather, Gap Analysis is centered on the larger...åÖÉ=======- 13 - = = Research Objectives The process of identifying needs and unsatisfied desires, or gaps in capability—in essence, the goal—is

Technology Roadmapping for Waste Management

International Nuclear Information System (INIS)

Bray, O.

2003-01-01

Technology roadmapping can be an effective strategic technology planning tool. This paper describes a process for customizing a generic technology roadmapping process. Starting with a generic process reduces the learning curve and speeds up the roadmap development. Similarly, starting with a generic domain model provides leverage across multiple applications or situations within the domain. A process that combines these two approaches facilitates identifying technology gaps and determining common core technologies that can be reused for multiple applications or situations within the domain. This paper describes both of these processes and how they can be integrated. A core team and a number of technology working groups develop the technology roadmap, which includes critical system requirements and targets, technology areas and metrics for each area, and identifies and evaluates possible technology alternatives to recommend the most appropriate ones to pursue. A generalized waste management model, generated by considering multiple situations or applications in terms of a generic waste management model, provides the domain requirements for the technology roadmapping process. Finally, the paper discusses lessons learns from a number of roadmapping projects

The reasons for the epilepsy treatment gap in Kilifi, Kenya: using formative research to identify interventions to improve adherence to antiepileptic drugs.

Science.gov (United States)

Carter, Julie A; Molyneux, Catherine S; Mbuba, Caroline K; Jenkins, Jo; Newton, Charles R J C; Hartley, Sally D

2012-12-01

Many people with epilepsy (PWE) in resource-poor countries do not receive appropriate treatment, a phenomenon referred to as the epilepsy treatment gap (ETG). We conducted a qualitative study to explore the reasons for this gap and to identify possible interventions in Kilifi, Kenya. Focus group discussions (FGDs) were carried out of PWE and their caregivers. Individual interviews were conducted of PWE, their caregivers, traditional healers, community health workers and leaders, nurses and doctors. In addition, a series of workshops was conducted, and four factors contributing to the ETG were identified: 1) lack of knowledge about the causes, treatment and prognosis of epilepsy; 2) inaccessibility to antiepileptic drugs; 3) misconceptions about epilepsy derived from superstitions about its origin; 4) and dissatisfaction with the communication skills of health providers. These data indicated possible interventions: 1) education and support for PWE and their caregivers; 2) communication skills training for health providers; 3) and improved drug provision. Copyright © 2012 Elsevier Inc. All rights reserved.

Identifying key performance indicators in food technology contract R&D

NARCIS (Netherlands)

Flipse, S.M.; Sanden, van der M.C.A.; Velden, van der T.; Fortuin, F.T.J.M.; Omta, S.W.F.; Osseweijer, P.

2013-01-01

Innovating companies increasingly rely on outsourcing to Contract Research Organisations (CROs) for their Research and Development (R&D), which are largely understudied. This paper presents the outcome of a case study in the field of food technology contract research, identifying context

Performance-Based Technology Selection Filter description report

International Nuclear Information System (INIS)

O'Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

1992-05-01

A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL)

Performance-Based Technology Selection Filter description report

Energy Technology Data Exchange (ETDEWEB)

O' Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

1992-05-01

A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL).

DISCONTOOLS: a database to identify research gaps on vaccines, pharmaceuticals and diagnostics for the control of infectious diseases of animals.

Science.gov (United States)

O'Brien, Declan; Scudamore, Jim; Charlier, Johannes; Delavergne, Morgane

2017-01-03

The public and private sector in the EU spend around €800 million per year on animal health and welfare related research. An objective process to identify critical gaps in knowledge and available control tools should aid the prioritisation of research in order to speed up the development of new or improved diagnostics, vaccines and pharmaceuticals and reduce the burden of animal diseases. Here, we describe the construction of a database based on expert consultation for 52 infectious diseases of animals. For each disease, an expert group produced a disease and product analysis document that formed the basis for gap analysis and prioritisation. The prioritisation model was based on a closed scoring system, employing identical weights for six evaluation criteria (disease knowledge; impact on animal health and welfare; impact on public health; impact on wider society; impact on trade; control tools). The diseases were classified into three groups: epizootic diseases, food-producing animal complexes or zoonotic diseases. The highly ranked diseases in the prioritisation model comprised mostly zoonotic and epizootic diseases with important gaps identified in vaccine development and pharmaceuticals, respectively. The most important outcome is the identification of key research needs by disease. The rankings and research needs by disease are provided on a public website ( www.discontools.eu ) which is currently being updated based on new expert consultations. As such, it can become a reference point for funders of research including the European Commission, member states, foundations, trusts along with private industry to prioritise research. This will deliver benefits in terms of animal health and welfare but also public health, societal benefits and a safe and secure food supply.

Distributed Collaborative Learning Communities Enabled by Information Communication Technology

NARCIS (Netherlands)

H.L. Alvarez (Heidi Lee)

2006-01-01

textabstractHow and why can Information Communication Technology (ICT) contribute to enhancing learning in distributed Collaborative Learning Communities (CLCs)? Drawing from relevant theories concerned with phenomenon of ICT enabled distributed collaborative learning, this book identifies gaps in

Novel technologies for safeguards

International Nuclear Information System (INIS)

Annese, C.; Monteith, A.; Whichello, J.

2009-01-01

Full-text: The International Atomic Energy Agency (IAEA) Novel Technologies Project is providing access to a wider range of methods and instruments, as well as establishing a systematic mechanism to analyse gaps in the inspectorate's technical support capabilities. The project also targets emerging and future inspectorate needs in the areas of verification and the detection of undeclared nuclear activities, materials, and facilities, providing an effective pathway to technologies in support of safeguards implementation. The identification of safeguards-useful nuclear fuel cycle (NFC) indicators and signatures (I and S) is a fundamental sub-task within the Project. It interfaces with other IAEA efforts currently underway to develop future safeguards approaches through undertaking an in-depth review of NFC processes. Primarily, the sub-task aims to identify unique and safeguards-useful 'indicators', which identify the presence of a particular process, and 'signatures', which emanate from that process when it is in operation. The matching of safeguards needs to detection tool capabilities facilitates the identification of gaps where no current method or instrument exists. The Project has already identified several promising technologies based on atmospheric gas sampling and analysis, laser spectrometry and optically stimulated luminescence. Instruments based on these technologies are presently being developed through support programme tasks with Member States. This paper discusses the IAEA's project, Novel Technologies for the Detection of Undeclared Nuclear Activities, Materials and Facilities and its goal to develop improved methods and instruments. The paper also describes the method that has been devised within the Project to identify safeguards-useful NFC I and S and to determine how the sub-task interfaces with other IAEA efforts to establish emerging safeguards approaches. As with all safeguards-targeted research and development (R and D), the IAEA depends

Extension Systems in Tanzania: Identifying Gaps in Research

African Journals Online (AJOL)

in Tanzania on agricultural extension systems; review research globally on agricultural ... cal techniques, unique results and major recommendations. .... participation in decision-making, natural .... soil and water management technologies in.

Measuring outcomes in adult spinal deformity surgery: a systematic review to identify current strengths, weaknesses and gaps in patient-reported outcome measures.

Science.gov (United States)

Faraj, Sayf S A; van Hooff, Miranda L; Holewijn, Roderick M; Polly, David W; Haanstra, Tsjitske M; de Kleuver, Marinus

2017-08-01

Adult spinal deformity (ASD) causes severe disability, reduces overall quality of life, and results in a substantial societal burden of disease. As healthcare is becoming more value based, and to facilitate global benchmarking, it is critical to identify and standardize patient-reported outcome measures (PROMs). This study aims to identify the current strengths, weaknesses, and gaps in PROMs used for ASD. Studies were included following a systematic search in multiple bibliographic databases between 2000 and 2015. PROMs were extracted and linked to the outcome domains of WHO's International Classification of Functioning and Health (ICF) framework. Subsequently, the clinimetric quality of identified PROMs was evaluated. The literature search identified 144 papers that met the inclusion criteria, and nine frequently used PROMs were identified. These covered 29 ICF outcome domains, which could be grouped into three of the four main ICF chapters: body function (n = 7), activity and participation (n = 19), environmental factors (n = 3), and body structure (n = 0). A low quantity (n = 3) of papers was identified that studied the clinimetric quality of PROMs. The Scoliosis Research Society (SRS)-22 has the highest level of clinimetric quality for ASD. Outcome domains related to mobility and pain were well represented. We identified a gap in current outcome measures regarding neurological and pulmonary function. In addition, no outcome domains were measured in the ICF chapter body structure. These results will serve as a foundation for the process of seeking international consensus on a standard set of outcome domains, accompanied PROMs and contributing factors to be used in future clinical trials and spine registries.

Solar-Powered, Micron-Gap Thermophotovoltaics for MEO Applications, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The proposed innovation is an InGaAs-based, radiation-tolerant, micron-gap thermophotovoltaic (MTPV) technology. The use of a micron wide gap between the radiation...

A Study of Scientometric Methods to Identify Emerging Technologies via Modeling of Milestones

Energy Technology Data Exchange (ETDEWEB)

Abercrombie, Robert K [ORNL; Udoeyop, Akaninyene W [ORNL; Schlicher, Bob G [ORNL

2012-01-01

This work examines a scientometric model that tracks the emergence of an identified technology from initial discovery (via original scientific and conference literature), through critical discoveries (via original scientific, conference literature and patents), transitioning through Technology Readiness Levels (TRLs) and ultimately on to commercial application. During the period of innovation and technology transfer, the impact of scholarly works, patents and on-line web news sources are identified. As trends develop, currency of citations, collaboration indicators, and on-line news patterns are identified. The combinations of four distinct and separate searchable on-line networked sources (i.e., scholarly publications and citation, patents, news archives, and online mapping networks) are assembled to become one collective network (a dataset for analysis of relations). This established network becomes the basis from which to quickly analyze the temporal flow of activity (searchable events) for the example subject domain we investigated.

Space-charge limitation of avalanche growth in narrow-gap resistive plate chambers

CERN Document Server

Williams, M C S

2004-01-01

A big advance in resistive plate chamber technology happened in 1996 with the advent of the multigap resistive plate chamber (MRPC). The MRPC allows us to easily construct detectors with many small gas gaps and thus we obtain good timing together with high detection efficiency. Using this technology, it is now common to build detectors with gas gaps of 200-300 mum in width. This paper examines space-charge limited avalanche growth; this becomes a dominant effect for narrow gap resistive plate chambers. This effect controls gas gain and explains the reason for the excellent behaviour of MRPCs built with this gas gap.

Mind the Gap!

DEFF Research Database (Denmark)

Schmidt, Kjeld; Simone, Carla

2000-01-01

CSCW at large seems to be pursuing two diverging strategies: on one hand a strategy aiming at coordination technologies that reduce the complexity of coordinating cooperative activities by regulating the coordinative interactions, and on the other hand a strategy that aims at radically flexible m...... and blended in the course of real world cooperative activities. On the basis of this discussion the paper outlines an approach which may help CSCW research to bridge this gap....... means of interaction which do not regulate interaction but rather leave it to the users to cope with the complexity of coordinating their activities. As both strategies reflect genuine requirements, we need to address the issue of how the gap can be bridged, that is, how the two strategies can...

The Primary Solid Waste Storage Gaps Experienced By Nairobi ...

African Journals Online (AJOL)

`123456789jkl''''#

This study identifies and analyses the solid waste management service gaps and situations in these different socio-economic ... identifying gaps existing at primary (household) SW ... internal structure is based on land uses and income levels.

Human Trafficking in Ethiopia: A Scoping Review to Identify Gaps in Service Delivery, Research, and Policy.

Science.gov (United States)

Beck, Dana C; Choi, Kristen R; Munro-Kramer, Michelle L; Lori, Jody R

2017-12-01

The purpose of this review is to integrate evidence on human trafficking in Ethiopia and identify gaps and recommendations for service delivery, research and training, and policy. A scoping literature review approach was used to systematically search nursing, medical, psychological, law, and international databases and synthesize information on a complex, understudied topic. The search yielded 826 articles, and 39 met the predetermined criteria for inclusion in the review. Trafficking in Ethiopia has occurred internally and externally in the form of adult and child labor and sex trafficking. There were also some reports of organ trafficking and other closely related human rights violations, such as child marriage, child soldiering, and exploitative intercountry adoption. Risk factors for trafficking included push factors (poverty, political instability, economic problems, and gender discrimination) and pull factors (demand for cheap labor). Trafficking was associated with poor health and economic outcomes for victims. Key recommendations for service delivery, research and training, and policy are identified, including establishing comprehensive services for survivor rehabilitation and reintegration, conducting quantitative health outcomes research, and reforming policy around migration and trafficking. Implementing the recommendations identified by this review will allow policy makers, researchers, and practitioners to take meaningful steps toward confronting human trafficking in Ethiopia.

Technology Estimating: A Process to Determine the Cost and Schedule of Space Technology Research and Development

Science.gov (United States)

Cole, Stuart K.; Reeves, John D.; Williams-Byrd, Julie A.; Greenberg, Marc; Comstock, Doug; Olds, John R.; Wallace, Jon; DePasquale, Dominic; Schaffer, Mark

2013-01-01

NASA is investing in new technologies that include 14 primary technology roadmap areas, and aeronautics. Understanding the cost for research and development of these technologies and the time it takes to increase the maturity of the technology is important to the support of the ongoing and future NASA missions. Overall, technology estimating may help provide guidance to technology investment strategies to help improve evaluation of technology affordability, and aid in decision support. The research provides a summary of the framework development of a Technology Estimating process where four technology roadmap areas were selected to be studied. The framework includes definition of terms, discussion for narrowing the focus from 14 NASA Technology Roadmap areas to four, and further refinement to include technologies, TRL range of 2 to 6. Included in this paper is a discussion to address the evaluation of 20 unique technology parameters that were initially identified, evaluated and then subsequently reduced for use in characterizing these technologies. A discussion of data acquisition effort and criteria established for data quality are provided. The findings obtained during the research included gaps identified, and a description of a spreadsheet-based estimating tool initiated as a part of the Technology Estimating process.

Closing the gap between research and management

Science.gov (United States)

Deborah M. Finch; Marcia Patton-Mallory

1993-01-01

In this paper, we evaluate the reasons for gaps in communication between researchers and natural resource managers and identify methods to close these gaps. Gaps originate from differing patterns of language use, disparities in organizational culture and values, generation of knowledge that is too narrowly-focused to solve complex problems, failure by managers to relay...

Low carbon mini grids 'Identifying the gaps; building the evidence base', Support Study for DFID - Final Report

International Nuclear Information System (INIS)

2013-11-01

This report represents the final report on the support study on 'Identifying the gaps and building the evidence base on low carbon mini-grids'. The review forms part of a preliminary initiative of DFID to promote Green Mini-Grids (GMG) in Africa under the International Climate Fund (ICF) with the objective of providing guidance and recommendations for DFID intervention and program implementation. The support study started in November 2012 and ended in September 2013. The report is based on activities which have included kick-off meetings, development of the methodological framework, literature and web review of documents relevant to the state-of-the-art practices for mini-grids, collation of relevant international experience, and a field visit in 2 targeted African countries (Kenya and Mozambique) to conduct interviews with key stakeholders and to collect field data. The report is structured in 8 chapters as per the requirements of the TOR, with a 'Highlights' section: 1- International Review of Mini-Grids and Data Collection, overview of the technologies, and of implementation schemes. The reality of the target countries is that while there are a number of diesel based mini-grids run either by private operators with low service and high cost, outside any regulated framework, and some run through various forms of Public Private Partnerships, there are extremely few Green Mini-Grids. Some Renewable Energy Power Generation operations are found to be for self-consumption or feeding into the grid, but very seldom for powering a Mini-Grid isolated from the interconnected network. 2 - Relevance of Mini-Grid Solutions, proposes an approach to help the planner identify whether in a given country/region, Mini-Grids - and further Green Mini-Grids are a viable option for access to electricity services. These mini-grid areas are those which will remain out reach of the interconnected grid for a few years to come, and yet where there is sufficient load density to ensure the

The Health Gap: Beyond Pregnancy and Reproduction | IDRC ...

International Development Research Centre (IDRC) Digital Library (Canada)

The Health Gap identifies and addresses key gaps in gender and health research: women and AIDS, tropical disease, the working environment, barriers to quality health care, and the health of adolescent and older women. It also identifies new and emerging themes in women's health and sets priorities for future action.

Developing a Gap Taxonomy to Address Crew Health Risks in NASA's Human Research Program

Science.gov (United States)

Kundrot, Craig E.; Edwards, J. Michelle

2009-01-01

The mission of NASA's Human Research Program (HRP) is to understand and reduce the risk to crew health and performance in exploration missions. The HRP addresses 27 specific risks by identifying and then filling gaps in understanding the risks and in the ability to disposition the risks. The primary bases for identifying gaps have been past experience and requirements definition. This approach has been very effective in identifying some important, relevant gaps, but may be inadequate for identifying gaps outside the past experience base. We are exploring the use of a gap taxonomy as a comprehensive, underlying conceptual framework that allows a more systematic identification of gaps. The taxonomy is based on these stages in medical care: prediction, prevention, detection/diagnosis, treatment, monitoring, rehabilitation, and lifetime surveillance. This gap taxonomy approach identifies new gaps in HRP health risks. Many of the new gaps suggest risk reduction approaches that are more cost effective than present approaches. A major benefit of the gap taxonomy approach is to identify new, economical approaches that reduce the likelihood and/or consequence of a risk.

Characterization and handling solutions through development and adaptation of available technologies

International Nuclear Information System (INIS)

Michel, W.S.; Frazee, C.

1998-01-01

The Department of Energy (DOE) faces unique challenges in characterizing and handling its mixed wastes. Mixed waste is low-level or transuranic (TRU) contaminated wastes containing Resource Conservation and Recovery Act (RCRA) hazardous materials. Characterization and material handling technologies will be required to solve pretreatment and disposal needs, and to meet transportation requirements. The Mixed Waste Focus Area (MWFA) will fund the development and demonstration of characterization and material handling technologies to ensure the availability to support the DOE mixed waste needs. The MWFA will be evaluating commercially available and laboratory developed technologies for applicability in meeting these needs. Improved systems will be developed, on the commercial or laboratory side, as needed to address unmet needs. Studies/demonstrations are taking place this year to evaluate the capabilities of existing systems and identify technology gaps. Calls for proposals will be made to both industry and laboratory to identify work to address those gaps. Prioritization of applicable proposals will take place and activities funded appropriately to address characterization and material handling needs

Identifying Disruptive Technologies in Design: Horizon Scanning in the Early Stages of Design

DEFF Research Database (Denmark)

Ernstsen, Sidsel Katrine; Thuesen, Christian; Larsen, Laurids Rolighed

context to anticipate disruption of construction. By means of a 3-step horizon scan, we identify 133 potentially disruptive technologies from across industries. We find that when preparing for disruption, design may benefit from the future-oriented and technology-focused features of horizon scanning....

Identifying and Researching Market Opportunities for New High Technology Products.

Science.gov (United States)

Dunstan, Peter

Using a product called the synchro-pulse welder as a case study example, this paper discusses the activities of CSIRO (Commonwealth Scientific and Industrial Research Organisation) in identifying and marketing new high-technology products. A general discussion of CSIRO's market research plans includes two goals to be attained within the next 5…

Scope of application of bio-technology for fire control and ameliorating environmental pollution of coal mines

International Nuclear Information System (INIS)

Banerjee, S.C.

1995-01-01

A few technology knowledge gaps in the control of mine fires and environmental pollution control and abatement programmes have been identified and examined the scope of application of bio-technological approach in resolving them. (author). 16 refs., 2 tabs

Identifying Ghanaian Pre-Service Teachers' Readiness for Computer Use: A Technology Acceptance Model Approach

Science.gov (United States)

Gyamfi, Stephen Adu

2016-01-01

This study extends the technology acceptance model to identify factors that influence technology acceptance among pre-service teachers in Ghana. Data from 380 usable questionnaires were tested against the research model. Utilising the extended technology acceptance model (TAM) as a research framework, the study found that: pre-service teachers'…

[Predictive distribution and planting GAP of Cyathula officinalis in China based on 3S technology and MaxEnt modelling].

Science.gov (United States)

Wu, Ming-Yan; He, Lan; Chen, Jia-Li; Dong, Guang; Cheng, Wu-Xue

2017-11-01

Research on predictive distribution and planting GAP of Cyathula officinalis in China is helpful to provide scientific basis for its protection and planting popularization. According to the data in 63 distribution sites and 49 ecological variables, using MaxEnt ecological niche model and 3S technology, we performed a quantitative analysis of suitable distribution and planting GAP of C. officinalis in China. Our results show that: ① the area of suitable distribution of C. officinalis is about 634 385.80 km² in total, and mainly in Northeastern and Southeastern Sichuan, Northern and Southeastern Yunnan, Western and Southwestern Guizhou, Southwestern and Northeastern Chongqing, Southwestern Shaanxi, Southeastern Gansu, Western Guangxi, Southeastern Tibet. ② The main ecological factors determining the potential distribution are precipitation, altitude, minimum temperature of coldest month, soil type, monthly mean temperature. ③ The planting GAP region are mainly in Guangyuan, Mianyang, Ya'an, Leshan, Liangshan, Panzhihua of Sichuan province, Hanzhong of Shaanxi province, Dali, Nujiang, Chuxiong, Baoshan, Qujing, Wenshan of Yunnan province, southwestern autonomous prefecture in Guizhou province. The results are of great significance for realizing the growth environment, predicting the potential distribution and promoting planting popularization for C. officinalis. Copyright© by the Chinese Pharmaceutical Association.

Identifying Disruptive Technologies in Design: Horizon Scanning in the Early Stages of Design

DEFF Research Database (Denmark)

Ernstsen, Sidsel Katrine; Thuesen, Christian; Larsen, Laurids Rolighed

Technology development is accelerating, driving disruption. Design is seen as key differentiator in creating innovative offerings but few design methods consider future technologies explicitly. In this article, we explore how a foresight method, namely horizon scanning, may be applied in a design...... context to anticipate disruption of construction. By means of a 3-step horizon scan, we identify 133 potentially disruptive technologies from across industries. We find that when preparing for disruption, design may benefit from the future-oriented and technology-focused features of horizon scanning....

Tire Crumb Research Study Literature Review / Gap ...

Science.gov (United States)

In order to more fully understand data gaps in human exposure and toxicity to tire crumb materials, ATSDR, CPSC and EPA undertook a collaborative effort in the form of a scientific literature review and subsequent gaps analysis. The first objective of the Literature Review and Gap Analysis (LRGA) collaboration was to identify the existing body of literature related specifically to human exposure to tire crumb materials through the use of synthetic turf athletic fields and playgrounds. The second objective was to characterize and summarize the relevant data from the scientific literature. The final objective was to review the summary information and identify data gaps to build on the current understanding of the state-of-the-science and inform the development of specific research efforts that would be most impactful in the near-term. Because of the need for additional information, the U.S. Environmental Protection Agency (EPA), the Centers for Disease Control and Prevention/Agency for Toxic Substances and Disease Registry (ATSDR), and the U.S. Consumer Product Safety Commission (CPSC) launched a multi-agency action plan to study key environmental human health questions. The Federal Research Action Plan includes numerous activities, including research studies (U.S. EPA, 2016). A key objective of the Action Plan is to identify key knowledge gaps.

Research gaps and technology needs in development of PHM for passive AdvSMR components

Energy Technology Data Exchange (ETDEWEB)

Meyer, Ryan M.; Ramuhalli, Pradeep; Hirt, Evelyn H.; Mitchell, Mark R.; Wootan, David W.; Berglin, Eric J.; Henagar, Chuck H. Jr. [Pacific Northwest National Laboratory, 902 Battelle Blvd., Richland, WA 99352 (United States); Coble, Jamie B. [University of Tennessee, Knoxville, Department of Nuclear Engineering, 315 Pasqua Engineering Building, Knoxville, TN 37996 (United States); Bond, Leonard J. [Iowa State University, Center for Nondestructive Evaluation, 1915 Scholl Rd., Ames, IA 50011 (United States)

2014-02-18

Advanced small modular reactors (AdvSMRs), which are based on modularization of advanced reactor concepts, may provide a longer-term alternative to traditional light-water reactors and near-term small modular reactors (SMRs), which are based on integral pressurized water reactor (iPWR) concepts. SMRs are challenged economically because of losses in economy of scale; thus, there is increased motivation to reduce the controllable operations and maintenance costs through automation technologies including prognostics health management (PHM) systems. In this regard, PHM systems have the potential to play a vital role in supporting the deployment of AdvSMRs and face several unique challenges with respect to implementation for passive AdvSMR components. This paper presents a summary of a research gaps and technical needs assessment performed for implementation of PHM for passive AdvSMR components.

Vehicle Codes and Standards: Overview and Gap Analysis

Energy Technology Data Exchange (ETDEWEB)

Blake, C.; Buttner, W.; Rivkin, C.

2010-02-01

This report identifies gaps in vehicle codes and standards and recommends ways to fill the gaps, focusing on six alternative fuels: biodiesel, natural gas, electricity, ethanol, hydrogen, and propane.

A gap analysis of meteorological requirements for commercial space operators

Science.gov (United States)

Stapleton, Nicholas James

Commercial space companies will soon be the primary method of launching people and supplies into orbit. Among the critical aspects of space launches are the meteorological concerns. Laws and regulations pertaining to meteorological considerations have been created to ensure the safety of the space industry and those living around spaceports; but, are they adequate? Perhaps the commercial space industry can turn to the commercial aviation industry to help answer that question. Throughout its history, the aviation industry has dealt with lessons learned from mishaps due to failures in understanding the significance of weather impacts on operations. Using lessons from the aviation industry, the commercial space industry can preempt such accidents and maintain viability as an industry. Using Lanicci's Strategic Planning Model, this study identified the weather needs of the commercial space industry by conducting three gap analyses. First, a comparative analysis was done between laws and regulations in commercial aviation and those in the commercial space industry pertaining to meteorological support, finding a "legislative gap" between the two industries, as no legal guarantee is in place to ensure weather products remain available to the commercial space industry. A second analysis was conducted between the meteorological services provided for the commercial aviation industry and commercial space industry, finding a gap at facilities not located at an established launch facility or airport. At such facilities, many weather observational technologies would not be present, and would need to be purchased by the company operating the spaceport facility. A third analysis was conducted between the meteorological products and regulations that are currently in existence, and those needed for safe operations within the commercial space industry, finding gaps in predicting lightning, electric field charge, and space weather. Recommendations to address these deficiencies have

Filling the gaps in SCWR materials research: advanced nuclear corrosion research facilities in Hamilton

International Nuclear Information System (INIS)

Krausher, J.L.; Zheng, W.; Li, J.; Guzonas, D.; Botton, G.

2011-01-01

Research efforts on materials selection and development in support of the design of supercritical water-cooled reactors (SCWRs) have produced a considerable amount of data on corrosion, creep and other related properties. Summaries of the data on corrosion [1] and stress corrosion cracking [2] have recently been produced. As research on the SCWR advances, gaps and limitations in the published data are being identified. In terms of corrosion properties, these gaps can be seen in several areas, including: 1) the test environment, 2) the physical and chemical severity of the tests conducted as compared with likely reactor service/operating conditions, and 3) the test methods used. While some of these gaps can be filled readily using existing facilities, others require the availability of advanced test facilities for specific tests and assessments. In this paper, highlights of the new materials research facilities jointly established in Hamilton by CANMET Materials Technology Laboratory and McMaster University are presented. (author)

Difficulties Using Standardized Tests to Identify the Receptive Expressive Gap in Bilingual Children's Vocabularies.

Science.gov (United States)

Gibson, Todd A; Oller, D Kimbrough; Jarmulowicz, Linda

2018-03-01

Receptive standardized vocabulary scores have been found to be much higher than expressive standardized vocabulary scores in children with Spanish as L1, learning L2 (English) in school (Gibson et al., 2012). Here we present evidence suggesting the receptive-expressive gap may be harder to evaluate than previously thought because widely-used standardized tests may not offer comparable normed scores. Furthermore monolingual Spanish-speaking children tested in Mexico and monolingual English-speaking children in the US showed other, yet different statistically significant discrepancies between receptive and expressive scores. Results suggest comparisons across widely used standardized tests in attempts to assess a receptive-expressive gap are precarious.

globalization, technology transfer and the knowledge gap

African Journals Online (AJOL)

USER

2011-06-10

Jun 10, 2011 ... manufacturing technology to the less developed countries of the South (Nigeria) in ... the primary sources of progress (Mill 1846 cited .... globalization process as in Asia and Latin. America. The Nigerian technology dream is.

Resources and development: trying to close the gap responsibly

Energy Technology Data Exchange (ETDEWEB)

Hotz, M C.B.

1981-01-01

While many countries struggle to industrialize, developed countries face economic and social problems which could preclude continued economic growth and may result in structural changes toward new economic systems as well as radically different lifestyles. The widening gap between rich and poor countries suggests that developing nations could take a different path in the way resources are owned and used. Resource management is complicated in developing countries if a large manpower pool is displaced by technology. This complexity also affects matters of health and man's relationship to the biological world. Industrial countries have resolved the problem of pollution control through technology, which adds another layer of economic and social impacts. The need is for new industrial processes that are supportive of the environment and for approaches that will identify linkages between human activity and environmental quality. Such harmony must be based on public knowledge and an understanding of policies. The focus should be on urban areas and the concept transferred in conjunction with technology to developing areas. (DCK)

Innovative new technologies to identify and treat traumatic brain injuries: crossover technologies and approaches between military and civilian applications.

Science.gov (United States)

Doarn, Charles R; McVeigh, Francis; Poropatich, Ronald

2010-04-01

Traumatic brain injury (TBI) has become the signature injury of Operation Iraqi Freedom and Operation Enduring Freedom. The use of improvised explosive devices has seen an exponential increase in both Iraq and Afghanistan. In previous conflicts prior to Iraq, survivability of such an injury was far less. Today, technological improvements in trauma care have increased an injured warfighter's chance of survival. A reduction in severe TBI has been achieved but an increase in mild or moderate TBI has been observed. The consequences of this kind of injury can be both physical and mental and can often be hidden or even misdiagnosed. The U.S. Army is interested in pursuing technological solutions for early detection and treatment of TBI to reduce its lasting impact on the warfighter. Such technological breakthroughs have benefit beyond the military, as TBI is a high probable event in nonmilitary settings as well. To gauge what technologies or methods are currently available, the U.S. Army's Telemedicine and Advanced Technology Research Center partnered with the American Telemedicine Association to organize and conduct a discipline-specific symposium entitled "Innovative New Technologies to Identify and Treat Traumatic Brain Injuries: Crossover Technologies and Approaches Between Military and Civilian Applications." This symposium was held in Palm Springs, CA, in September 2009. The purpose of the meeting was to provide a unique opportunity for leaders from disparate organizations involved in telemedicine and related other activities to meet and explore opportunities to collaborate in new partnership models. The meeting was designed to help Telemedicine and Advanced Technology Research Center identify opportunities to expand strategic operations and form new alliances. This report summarizes this symposium while raising awareness for collaboration into better ways of adapting and adopting technologies to address this growing health issue.

Biological transfer of radionuclides in marine environments - Identifying and filling knowledge gaps for environmental impact assessments

International Nuclear Information System (INIS)

Brown, J.E.; Borretzen, P.; Hosseini, A.; Iosjpe, M.

2004-01-01

A review on concentration factors (CF) for the marine environment was conducted in order to consider the relevance of existing data from the perspective of environmental protection and to identify areas of data paucity. Data have been organised in a format compatible with a reference organism approach, for selected radionuclides, and efforts have been taken to identify the factors that may be of importance in the context of dosimetric and dose-effects analyses. These reference organism categories had been previously selected by identifying organism groups that were likely to experience the highest levels of radiation exposure, owing to high uptake levels or residence in a particular habitat, for defined scenarios. Significant data gaps in the CF database have been identified, notably for marine mammals and birds. Most empirical information pertains to a limit suite of radionuclides, particularly 137 Cs, 210 Po and 99 Tc. A methodology has been developed to help bridge this information deficit. This has been based on simple dynamic, biokinetic models that mainly use parameters derived from laboratory-based study and field observation. In some cases, allometric relationships have been employed to allow further model parameterization. Initial testing of the model by comparing model output with empirical data sets suggest that the models provide sensible equilibrium CFs. Furthermore, analyses of modelling results suggest that for some radionuclides, in particularly those with long effective half-lives, the time to equilibrium can be far greater than the life-time of an organism. This clearly emphasises the limitations of applying a universal equilibrium approach. The methodology, therefore, has an added advantage that non-equilibrium scenarios can be considered in a more rigorous manner. Further refinements to the modelling approach might be attained by exploring the importance of various model parameters, through sensitivity analyses, and by identifying those

Young people's experiences of persistent musculoskeletal pain, needs, gaps and perceptions about the role of digital technologies to support their co-care: a qualitative study.

Science.gov (United States)

Slater, Helen; Jordan, Joanne E; Chua, Jason; Schütze, Robert; Wark, John D; Briggs, Andrew M

2016-12-09

To investigate young people's experiences of persistent musculoskeletal pain, including care needs and current service gaps as well as perceptions about the role of digital technologies to support their co-care. A qualitative study employing two independent data collection modes: in-depth individual semistructured interviews and focus groups. Community settings throughout Australia. Participants were included if they had experienced persistent musculoskeletal pain of >3-month duration with an average of ≥3 on the visual analogue scale over the preceding 3 months, including non-specific conditions (eg, low back pain) and specific conditions (eg, juvenile idiopathic arthritis and other systemic arthritides), with/without pre-existing or current diagnosed mental health conditions. 23 young people (87.0% women; mean (SD) age: 20.8 (2.4) years) from across 6 Australian jurisdictions participated. Almost two-thirds of participants with persistent musculoskeletal pain reported comorbid mental health conditions. Inductive and deductive approaches to analyse and derive key themes from verbatim transcripts. Participants described their daily experiences of living with persistent musculoskeletal pain, their fears and the challenges imposed by the invisibility of pain, and the two-way relationship between their pain and mental well-being. A lack of relevant and accessible information and resources tailored to young people's unique needs, integrated and youth-relevant healthcare services and adequately skilled healthcare practitioners were identified as key care gaps. Participants strongly advocated for the use of digital technologies to improve access to age-appropriate resources and support for co-care. Young people living with persistent musculoskeletal pain described the absence of age-appropriate pain services and clearly articulated their perceptions on the role of, and opportunities provided by, digital technologies to connect with and support improved pain

Obesity educational interventions in U.S. medical schools: a systematic review and identified gaps.

Science.gov (United States)

Vitolins, Mara Z; Crandall, Sonia; Miller, David; Ip, Eddie; Marion, Gail; Spangler, John G

2012-01-01

Obesity is the second leading cause of preventable death in the United States. However, physicians feel poorly trained to address the obesity epidemic. This article examines effective training methods for overweight and obesity intervention in undergraduate medical education. Using indexing terms related to overweight, obesity, and medical student education, we conducted a literature searched PubMed PsycINFO, Cochrane, and ERIC for relevant articles in English. References from articles identified were also reviewed to located additional articles. We included all studies that incorporated process or outcome evaluations of obesity educational interventions for U.S. medical students. Of an initial 168 citations, 40 abstracts were retrieved; 11 studies were found to be pertinent to medical student obesity education, but only 5 included intervention and evaluation elements. Quality criteria for inclusion consisted of explicit evaluation of the educational methods used. Data extraction identified participants (e.g., year of medical students), interventions, evaluations, and results. These 5 studies successfully used a variety of teaching methods including hands on training, didactic lectures, role-playing, and standardized patient interaction to increase medical students' knowledge, attitudes, and skills regarding overweight and obesity intervention. Two studies addressed medical student bias toward overweight and obese patients. No studies addressed health disparities in the epidemiology and bias of obesity. Despite the commonly cited "obesity epidemic," there are very few published studies that report the effectiveness of medical school obesity educational programs. Gaps still exist within undergraduate medical education including specific training that addresses obesity and long-term studies showing that such training is retained.

Water limits to closing yield gaps

Science.gov (United States)

Davis, Kyle Frankel; Rulli, Maria Cristina; Garrassino, Francesco; Chiarelli, Davide; Seveso, Antonio; D'Odorico, Paolo

2017-01-01

Agricultural intensification is often seen as a suitable approach to meet the growing demand for agricultural products and improve food security. It typically entails the use of fertilizers, new cultivars, irrigation, and other modern technology. In regions of the world affected by seasonal or chronic water scarcity, yield gap closure is strongly dependent on irrigation (blue water). Global yield gap assessments have often ignored whether the water required to close the yield gap is locally available. Here we perform a gridded global analysis (10 km resolution) of the blue water consumption that is needed annually to close the yield gap worldwide and evaluate the associated pressure on renewable freshwater resources. We find that, to close the yield gap, human appropriation of freshwater resources for irrigation would have to increase at least by 146%. Most study countries would experience at least a doubling in blue water requirement, with 71% of the additional blue water being required by only four crops - maize, rice, soybeans, and wheat. Further, in some countries (e.g., Algeria, Morocco, Syria, Tunisia, and Yemen) the total volume of blue water required for yield gap closure would exceed sustainable levels of freshwater consumption (i.e., 40% of total renewable surface and groundwater resources).

ADMS State of the Industry and Gap Analysis

Energy Technology Data Exchange (ETDEWEB)

Agalgaonkar, Yashodhan P.; Marinovici, Maria C.; Vadari, Subramanian V.; Schneider, Kevin P.; Melton, Ronald B.

2016-03-31

An Advanced distribution management system (ADMS) is a platform for optimized distribution system operational management. This platform comprises of distribution management system (DMS) applications, supervisory control and data acquisition (SCADA), outage management system (OMS), and distributed energy resource management system (DERMS). One of the primary objectives of this work is to study and analyze several ADMS component and auxiliary systems. All the important component and auxiliary systems, SCADA, GISs, DMSs, AMRs/AMIs, OMSs, and DERMS, are discussed in this report. Their current generation technologies are analyzed, and their integration (or evolution) with an ADMS technology is discussed. An ADMS technology state of the art and gap analysis is also presented. There are two technical gaps observed. The integration challenge between the component operational systems is the single largest challenge for ADMS design and deployment. Another significant challenge noted is concerning essential ADMS applications, for instance, fault location, isolation, and service restoration (FLISR), volt-var optimization (VVO), etc. There are a relatively small number of ADMS application developers as ADMS software platform is not open source. There is another critical gap and while not being technical in nature (when compared the two above) is still important to consider. The data models currently residing in utility GIS systems are either incomplete or inaccurate or both. This data is essential for planning and operations because it is typically one of the primary sources from which power system model are created. To achieve the full potential of ADMS, the ability to execute acute Power Flow solution is an important pre-requisite. These critical gaps are hindering wider Utility adoption of an ADMS technology. The development of an open architecture platform can eliminate many of these barriers and also aid seamless integration of distribution Utility legacy systems with an

Bots mind the social-technical gap

NARCIS (Netherlands)

Lee, M.; Frank, L.E.; Beute, F.; de Kort, Y.A.W.; IJsselsteijn, W.A.

2017-01-01

Mobile workers experience the social-technical gap when moral dilemmas occur on communication platforms, and technology cannot adapt to social contexts on ethical matters. On messaging applications, bots are non-human team members and/or assistants that can aid mobile workers manage ethical

Bridging the Gap: Ideas for water sustainability in the western United States

Science.gov (United States)

Tidwell, V. C.; Passell, H. D.; Roach, J. D.

2012-12-01

Incremental improvements in water sustainability in the western U.S. may not be able to close the growing gap between increasing freshwater demand, climate driven variability in freshwater supply, and growing environmental consciousness. Incremental improvements include municipal conservation, improvements to irrigation technologies, desalination, water leasing, and others. These measures, as manifest today in the western U.S., are successful in themselves but limited in their ability to solve long term water scarcity issues. Examples are plainly evident and range from the steady and long term decline of important aquifers and their projected inability to provide water for future agricultural irrigation, projected declines in states' abilities to meet legal water delivery obligations between states, projected shortages of water for energy production, and others. In many cases, measures that can close the water scarcity gap have been identified, but often these solutions simply shift the gap from water to some other sector, e.g., economics. Saline, brackish or produced water purification, for example, could help solve western water shortages in some areas, but will be extremely expensive, and so shift the gap from water to economics. Transfers of water out of agriculture could help close the water scarcity gap in other areas; however, loss of agriculture will shift the gap to regional food security. All these gaps, whether in water, economics, food security, or other sectors, will have a negative impact on the western states. Narrowing these future gaps requires both technical and policy solutions as well as tools to understand the tradeoffs. Here we discuss several examples from across the western U.S. that span differing scales and decision spaces. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear

Water resources management in Tanzania: identifying research ...

African Journals Online (AJOL)

This paper aims at identifying research gaps and needs and recommendations for a research agenda on water resources management in Tanzania. We reviewed published literature on water resources management in Tanzania in order to highlight what is currently known, and to identify knowledge gaps, and suggest ...

NIH Common Fund - Disruptive Proteomics Technologies - Challenges and Opportunities | Office of Cancer Clinical Proteomics Research

Science.gov (United States)

This Request for Information (RFI) is directed toward determining how best to accelerate research in disruptive proteomics technologies. The Disruptive Proteomics Technologies (DPT) Working Group of the NIH Common Fund wishes to identify gaps and opportunities in current technologies and methodologies related to proteome-wide measurements.  For the purposes of this RFI, “disruptive” is defined as very rapid, very significant gains, similar to the "disruptive" technology development that occurred in DNA sequencing technology.

On the selection of financing instruments to push the development of new technologies: Application to clean energy technologies

International Nuclear Information System (INIS)

Olmos, Luis; Ruester, Sophia; Liong, Siok-Jen

2012-01-01

Achieving climate policy goals requires mobilizing public funds to bring still immature clean technologies to competitiveness and create new technological options. The format of direct public support must be tailored to the characteristics of technologies addressed. Based on the experience accumulated with innovation programs, we have identified those features of innovation that should directly condition the choice of direct support instruments. These include the funding gap between the cost of innovation activities and the amount of private funds leveraged; the ability of technologies targeted to compete for public funds in the market; the probability that these technologies fail to reach the market; and the type of entity best suited to conduct these activities. Clean innovation features are matched to those of direct support instruments to provide recommendations on the use to be made of each type of instrument. Given the large financing gap of most clean energy innovation projects, public grants and contracts should finance a large part of clean pre-deployment innovation. However, public loans, equity investments, prizes and tax credits or rebates can successfully support certain innovation processes at a lower public cost. Principles derived are applied to identify the instrument best suited to a case example. - Highlights: ► Public financing instruments must be tailored to the features of supported innovation. ► Instruments should trigger desired innovation at the lowest public cost possible. ► They should strike the right balance between technology selection and competition. ► Public funds mobilized through them should reach the innovating entity. ► Public loans, equity investments, prizes, and rebates should be used in specific cases.

Emplacement Gantry Gap Analysis Study

International Nuclear Information System (INIS)

Thornley, R.

2005-01-01

To date, the project has established important to safety (ITS) performance requirements for structures, systems, and components (SSCs) based on the identification and categorization of event sequences that may result in a radiological release. These performance requirements are defined within the ''Nuclear Safety Design Bases for License Application'' (NSDB) (BSC 2005 [DIRS 171512], Table A-11). Further, SSCs credited with performing safety functions are classified as ITS. In turn, assurance that these SSCs will perform as required is sought through the use of consensus codes and standards. This gap analysis is based on the design completed for license application only. Accordingly, identification of ITS SSCs beyond those defined within the NSDB are based on designs that may be subject to further development during detail design. Furthermore, several design alternatives may still be under consideration to satisfy certain safety functions, and final selection will not be determined until further design development has occurred. Therefore, for completeness, alternative designs currently under consideration will be discussed throughout this study. This gap analysis will evaluate each code and standard identified within the ''Emplacement Gantry ITS Standards Identification Study'' (BSC 2005 [DIRS 173586]) to ensure each ITS performance requirement is fully satisfied. When a performance requirement is not fully satisfied, a gap is highlighted. This study will identify requirements to supplement or augment the code or standard to meet performance requirements. Further, this gap analysis will identify nonstandard areas of the design that will be subject to a design development plan. Nonstandard components and nonstandard design configurations are defined as areas of the design that do not follow standard industry practices or codes and standards. Whereby, assurance that an SSC will perform as required may not be readily sought though the use of consensus standards. This

Characterization and assessment of novel bulk storage technologies : a study for the DOE Energy Storage Systems program.

Energy Technology Data Exchange (ETDEWEB)

Huff, Georgianne; Tong, Nellie (KEMA Consulting, Fairfax, VA); Fioravanti, Richard (KEMA Consulting, Fairfax, VA); Gordon, Paul (Sentech/SRA International, Bethesda, MD); Markel, Larry (Sentech/SRA International, Bethesda, MD); Agrawal, Poonum (Sentech/SRA International, Bethesda, MD); Nourai, Ali (KEMA Consulting, Fairfax, VA)

2011-04-01

This paper reports the results of a high-level study to assess the technological readiness and technical and economic feasibility of 17 novel bulk energy storage technologies. The novel technologies assessed were variations of either pumped storage hydropower (PSH) or compressed air energy storage (CAES). The report also identifies major technological gaps and barriers to the commercialization of each technology. Recommendations as to where future R&D efforts for the various technologies are also provided based on each technology's technological readiness and the expected time to commercialization (short, medium, or long term). The U.S. Department of Energy (DOE) commissioned this assessment of novel concepts in large-scale energy storage to aid in future program planning of its Energy Storage Program. The intent of the study is to determine if any new but still unproven bulk energy storage concepts merit government support to investigate their technical and economic feasibility or to speed their commercialization. The study focuses on compressed air energy storage (CAES) and pumped storage hydropower (PSH). It identifies relevant applications for bulk storage, defines the associated technical requirements, characterizes and assesses the feasibility of the proposed new concepts to address these requirements, identifies gaps and barriers, and recommends the type of government support and research and development (R&D) needed to accelerate the commercialization of these technologies.

A novel multi-level IC-compatible surface microfabrication technology for MEMS with independently controlled lateral and vertical submicron transduction gaps

Science.gov (United States)

Cicek, Paul-Vahe; Elsayed, Mohannad; Nabki, Frederic; El-Gamal, Mourad

2017-11-01

An above-IC compatible multi-level MEMS surface microfabrication technology based on a silicon carbide structural layer is presented. The fabrication process flow provides optimal electrostatic transduction by allowing the creation of independently controlled submicron vertical and lateral gaps without the need for high resolution lithography. Adopting silicon carbide as the structural material, the technology ensures material, chemical and thermal compatibility with modern semiconductor nodes, reporting the lowest peak processing temperature (i.e. 200 °C) of all comparable works. This makes this process ideally suited for integrating capacitive-based MEMS directly above standard CMOS substrates. Process flow design and optimization are presented in the context of bulk-mode disk resonators, devices that are shown to exhibit improved performance with respect to previous generation flexural beam resonators, and that represent relatively complex MEMS structures. The impact of impending improvements to the fabrication technology is discussed.

A novel multi-level IC-compatible surface microfabrication technology for MEMS with independently controlled lateral and vertical submicron transduction gaps

International Nuclear Information System (INIS)

Cicek, Paul-Vahe; Elsayed, Mohannad; Nabki, Frederic; El-Gamal, Mourad

2017-01-01

An above-IC compatible multi-level MEMS surface microfabrication technology based on a silicon carbide structural layer is presented. The fabrication process flow provides optimal electrostatic transduction by allowing the creation of independently controlled submicron vertical and lateral gaps without the need for high resolution lithography. Adopting silicon carbide as the structural material, the technology ensures material, chemical and thermal compatibility with modern semiconductor nodes, reporting the lowest peak processing temperature (i.e. 200 °C) of all comparable works. This makes this process ideally suited for integrating capacitive-based MEMS directly above standard CMOS substrates. Process flow design and optimization are presented in the context of bulk-mode disk resonators, devices that are shown to exhibit improved performance with respect to previous generation flexural beam resonators, and that represent relatively complex MEMS structures. The impact of impending improvements to the fabrication technology is discussed. (paper)

Development of gap filling technique in HLW repository

International Nuclear Information System (INIS)

Nakashima, Hitoshi; Saito, Akira; Ishii, Takashi; Toguri, Satohito; Okihara, Mitsunobu; Iwasa, Kengo

2016-01-01

HLW is supposed to be disposed underground at depths more than 300 m in Japan. Buffer is an artificial barrier that controls radionuclides migrating into the groundwater. The buffer would be made of a natural swelling clay, bentonite. Construction technology for the buffer has been studied for many years, but studies for the gaps surrounding the buffer are little. The proper handling of the gaps is important for guaranteeing the functions of the buffer. In this paper, gap filling techniques using bentonite pellets have been developed in order to the gap having the same performance as the buffer. A new method for manufacturing high-density spherical pellets has been developed to fill the gap higher density ever reported. For the bentonite pellets, the filling performance and how to use were determined. And full-scale filling tests provided availability of the bentonite pellets and filling techniques. (author)

CIEEM Skills Gap Project

OpenAIRE

Bartlett, Deborah

2017-01-01

This paper describes the research conducted for the Chartered Institute for Ecology and Environmental Management to identify skills gaps within the profession. It involved surveys of professionals, conference workshops and an investigation into the views of employers regarding graduate recruitment.

Reducing Excellence Gaps: A Research-Based Model

Science.gov (United States)

Plucker, Jonathan A.; Peters, Scott J.; Schmalensee, Stephanie

2017-01-01

As the awareness of the existence and negative effects of excellence gaps has grown among educators and policy makers, so too has a desire for research-supported interventions to reduce these gaps. A recent review of research related to promoting equitable outcomes for all gifted students identified six specific strategies for reducing excellence…

Healthcare technology innovation adoption electronic health records and other emerging health information technology innovations

CERN Document Server

Daim, Tugrul U; Basoglu, Nuri; Kök, Orhun M; Hogaboam, Liliya

2016-01-01

This book aims to study the factors affecting the adoption and diffusion of Health Information Technology (HIT) innovation. It analyzes the adoption processes of various tools and applications, particularly Electronic Health Records (EHR), highlighting the impact on various sectors of the healthcare system, such as physicians, administration,  and patient care, while also identifying the various pitfalls and gaps in the literature. With the various challenges currently facing the United States healthcare system, the study, adoption and diffusion of healthcare technology innovation, particularly HIT, is imperative to achieving national goals. This book is organized into three sections. Section one reviews theories and applications for the diffusion of Health Care Technologies. Section two evaluates EHR technology, including the barriers and enables in adoption and alternative technologies. Finally, section three examines the factors impacting the adoption of EHR systems. This book will be a key source for stu...

Magnetization states and switching in narrow-gapped ferromagnetic nanorings

Directory of Open Access Journals (Sweden)

Jie Li

2012-03-01

Full Text Available We study permalloy nanorings that are lithographically fabricated with narrow gaps that break the rotational symmetry of the ring while retaining the vortex ground state, using both micromagnetic simulations and magnetic force microscopy (MFM. The vortex chirality in these structures can be readily set with an in-plane magnetic field and easily probed by MFM due to the field associated with the gap, suggesting such rings for possible applications in storage technologies. We find that the gapped ring edge characteristics (i.e., edge profile and gap shape are critical in determining the magnetization switching field, thus elucidating an essential parameter in the controls of devices that might incorporate such structures.

Assessment of technologies for the remediation of radioactively contaminated Superfund sites

International Nuclear Information System (INIS)

1990-01-01

The report is a screening evaluation of information needs for the development of generic treatability studies for the remediation of Superfund Radiation Sites on the National Priorities List (NPL). It presents a categorization of the 25 radiation sites currently proposed or listed on the NPL, and provides a rating system for evaluating technologies that may be used to remediate these sites. It also identifies gaps in site assessment and technology data and provides information about and recommendations for technology development

Tensile-strain effect of inducing the indirect-to-direct band-gap transition and reducing the band-gap energy of Ge

Energy Technology Data Exchange (ETDEWEB)

Inaoka, Takeshi, E-mail: inaoka@phys.u-ryukyu.ac.jp; Furukawa, Takuro; Toma, Ryo; Yanagisawa, Susumu [Department of Physics and Earth Sciences, Faculty of Science, University of the Ryukyus, 1 Senbaru, Nishihara, Okinawa 903-0213 (Japan)

2015-09-14

By means of a hybrid density-functional method, we investigate the tensile-strain effect of inducing the indirect-to-direct band-gap transition and reducing the band-gap energy of Ge. We consider [001], [111], and [110] uniaxial tensility and (001), (111), and (110) biaxial tensility. Under the condition of no normal stress, we determine both normal compression and internal strain, namely, relative displacement of two atoms in the primitive unit cell, by minimizing the total energy. We identify those strain types which can induce the band-gap transition, and evaluate the critical strain coefficient where the gap transition occurs. Either normal compression or internal strain operates unfavorably to induce the gap transition, which raises the critical strain coefficient or even blocks the transition. We also examine how each type of tensile strain decreases the band-gap energy, depending on its orientation. Our analysis clearly shows that synergistic operation of strain orientation and band anisotropy has a great influence on the gap transition and the gap energy.

Incentives to create and sustain healthy behaviors: technology solutions and research needs.

Science.gov (United States)

Teyhen, Deydre S; Aldag, Matt; Centola, Damon; Edinborough, Elton; Ghannadian, Jason D; Haught, Andrea; Jackson, Theresa; Kinn, Julie; Kunkler, Kevin J; Levine, Betty; Martindale, Valerie E; Neal, David; Snyder, Leslie B; Styn, Mindi A; Thorndike, Frances; Trabosh, Valerie; Parramore, David J

2014-12-01

Health-related technology, its relevance, and its availability are rapidly evolving. Technology offers great potential to minimize and/or mitigate barriers associated with achieving optimal health, performance, and readiness. In support of the U.S. Army Surgeon General's vision for a "System for Health" and its Performance Triad initiative, the U.S. Army Telemedicine and Advanced Technology Research Center hosted a workshop in April 2013 titled "Incentives to Create and Sustain Change for Health." Members of government and academia participated to identify and define the opportunities, gain clarity in leading practices and research gaps, and articulate the characteristics of future technology solutions to create and sustain real change in the health of individuals, the Army, and the nation. The key factors discussed included (1) public health messaging, (2) changing health habits and the environmental influence on health, (3) goal setting and tracking, (4) the role of incentives in behavior change intervention, and (5) the role of peer and social networks in change. This report summarizes the recommendations on how technology solutions could be employed to leverage evidence-based best practices and identifies gaps in research where further investigation is needed. Reprint & Copyright © 2014 Association of Military Surgeons of the U.S.

76 FR 10360 - Access to Confidential Business Information by Guident Technologies Inc. and Its Identified...

Science.gov (United States)

2011-02-24

... Business Information by Guident Technologies Inc. and Its Identified Subcontractors AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: EPA has authorized its contractor, Guident Technologies... information may be claimed or determined to be Confidential Business Information (CBI). DATES: Access to the...

Rural and remote dental services shortages: filling the gaps through geo-spatial analysis evidence-based targeting.

Science.gov (United States)

Shiika, Yulia; Kruger, Estie; Tennant, Marc

Australia has a significant mal-distribution of its limited dental workforce. Outside the major capital cities, the distribution of accessible dental care is at best patchy. This study applied geo-spatial analysis technology to locate gaps in dental service accessibility for rural and remote dwelling Australians, in order to test the hypothesis that there are a few key location points in Australia where further dental services could make a significant contribution to ameliorating the immediate shortage crisis. A total of 2,086 dental practices were located in country areas, covering a combined catchment area of 1.84 million square kilometers, based on 50 km catchment zones around each clinic. Geo-spatial analysis technology was used to identify gaps in the accessibility of dental services for rural and remote dwelling Australians. An extraction of data was obtained to analyse the integrated geographically-aligned database. Results: Resolution of the lack of dental practices for 74 townships (of greater than 500 residents) across Australia could potentially address access for 104,000 people. An examination of the socio-economic mix found that the majority of the dental practices (84%) are located in areas classified as less disadvantaged. Output from the study provided a cohesive national map that has identified locations that could have health improvement via the targeting of dental services to that location. The study identified potential location sites for dental clinics, to address the current inequity in accessing dental services in rural and remote Australia.

Techno-economical parameters of renewable electricity options in 2008. Draft recommendation for financial gap calculations

International Nuclear Information System (INIS)

Van Tilburg, X.; Stienstra, G.J.; Lensink, S.M.; Pfeiffer, E.A.; Cleijne, H.

2007-02-01

The results of a study on the financial gaps of renewable energy production technologies are presented. These financial gaps form the basis for determining the level of so-called MEP-subsidies (feed-in tariffs) for different renewable electricity sources and technologies. This report contains a recommendation on the financial gaps for projects in the Netherlands which are planned to be finalized in 2008. Although the report is based on careful research, the results have not been presented to stakeholders for consultation [nl

Priorities for technology development and policy to reduce the risk from radioactive materials

International Nuclear Information System (INIS)

Duggan, Ruth Ann

2010-01-01

The Standing Committee on International Security of Radioactive and Nuclear Materials in the Nonproliferation and Arms Control Division conducted its fourth annual workshop in February 2010 on Reducing the Risk from Radioactive and Nuclear Materials. This workshop examined new technologies in real-time tracking of radioactive materials, new risks and policy issues in transportation security, the best practices and challenges found in addressing illicit radioactive materials trafficking, industry leadership in reducing proliferation risk, and verification of the Nuclear Nonproliferation Treaty, Article VI. Technology gaps, policy gaps, and prioritization for addressing the identified gaps were discussed. Participants included academia, policy makers, radioactive materials users, physical security and safeguards specialists, and vendors of radioactive sources and transportation services. This paper summarizes the results of this workshop with the recommendations and calls to action for the Institute of Nuclear Materials Management (INMM) membership community.

Report from the Light Water Reactor Sustainability Workshop on On-Line Monitoring Technologies

International Nuclear Information System (INIS)

Baldwin, Thomas; Tawfik, Magdy; Bond, Leonard

2010-01-01

In support of expanding the use of nuclear power, interest is growing in methods of determining the feasibility of longer term operation for the U.S. fleet of nuclear power plants, particularly operation beyond 60 years. To help establish the scientific and technical basis for such longer term operation, the DOE-NE has established a research and development (R and D) objective. This objective seeks to develop technologies and other solutions that can improve the reliability, sustain the safety, and extend the life of current reactors. The Light Water Reactor Sustainability (LWRS) Program, which addresses the needs of this objective, is being developed in collaboration with industry R and D programs to provide the technical foundations for licensing and managing the long-term, safe, and economical operation of nuclear power plants. The LWRS Program focus is on longer-term and higher-risk/reward research that contributes to the national policy objectives of energy and environmental security. In moving to identify priorities and plan activities, the Light Water Reactor Sustainability Workshop on On-Line Monitoring (OLM) Technologies was held June 10-12, 2010, in Seattle, Washington. The workshop was run to enable industry stakeholders and researchers to identify the nuclear industry needs in the areas of future OLM technologies and corresponding technology gaps and research capabilities. It also sought to identify approaches for collaboration that would be able to bridge or fill the technology gaps. This report is the meeting proceedings, documenting the presentations and discussions of the workshop and is intended to serve as a basis for a plan which is under development that will enable the I and C research pathway to achieve its goals. Benefits to the nuclear industry accruing from On Line Monitoring Technology cannot be ignored. Information gathered thus far has contributed significantly to the Department of Energy's Light Water Reactor Sustainability Program. DOE

Report from the Light Water Reactor Sustainability Workshop on On-Line Monitoring Technologies

Energy Technology Data Exchange (ETDEWEB)

Thomas Baldwin; Magdy Tawfik; Leonard Bond

2010-06-01

In support of expanding the use of nuclear power, interest is growing in methods of determining the feasibility of longer term operation for the U.S. fleet of nuclear power plants, particularly operation beyond 60 years. To help establish the scientific and technical basis for such longer term operation, the DOE-NE has established a research and development (R&D) objective. This objective seeks to develop technologies and other solutions that can improve the reliability, sustain the safety, and extend the life of current reactors. The Light Water Reactor Sustainability (LWRS) Program, which addresses the needs of this objective, is being developed in collaboration with industry R&D programs to provide the technical foundations for licensing and managing the long-term, safe, and economical operation of nuclear power plants. The LWRS Program focus is on longer-term and higher-risk/reward research that contributes to the national policy objectives of energy and environmental security. In moving to identify priorities and plan activities, the Light Water Reactor Sustainability Workshop on On-Line Monitoring (OLM) Technologies was held June 10–12, 2010, in Seattle, Washington. The workshop was run to enable industry stakeholders and researchers to identify the nuclear industry needs in the areas of future OLM technologies and corresponding technology gaps and research capabilities. It also sought to identify approaches for collaboration that would be able to bridge or fill the technology gaps. This report is the meeting proceedings, documenting the presentations and discussions of the workshop and is intended to serve as a basis for a plan which is under development that will enable the I&C research pathway to achieve its goals. Benefits to the nuclear industry accruing from On Line Monitoring Technology cannot be ignored. Information gathered thus far has contributed significantly to the Department of Energy’s Light Water Reactor Sustainability Program. DOE has

Research on monitoring technology of axial gap change about high-speed rotating machinery

International Nuclear Information System (INIS)

Zhang Xiaochan; Liu Fanglei; Hu Shihua; Xie Qing; Li Zhen

2014-01-01

This paper describes that the only measuring point of high-speed rotating machinery (speed monitoring transducer) measuring the operation of the axial gap change and application. According to mechanism analysis the speed monitoring transducer's signal, prove its amplitude changes including the axial gap change information. To carry out the speed monitoring transducer qualitative and quantitative axial gap change research, Find the output signal amplitude and clearance change corresponding relationship formula of speed monitoring transducer, define the measurement method. Based on the above analsis, manufacture the single channel measurement devices and multiple unit measurement system, provide an important fault decision of high-speed rotating machinery, it can be applied to new equipment development and production. (authors)

Technology and Manufacturing Readiness of Early Market Motive and Non-Motive Hydrogen Storage Technologies for Fuel Cell Applications

Energy Technology Data Exchange (ETDEWEB)

Ronnebro, Ewa

2012-06-16

PNNL’s objective in this report is to provide DOE with a technology and manufacturing readiness assessment to identify hydrogen storage technologies’ maturity levels for early market motive and non-motive applications and to provide a path forward toward commercialization. PNNL’s Technology Readiness Assessment (TRA) is based on a combination of Technology Readiness Level (TRL) and Manufacturing Readiness Level (MRL) designations that enable evaluation of hydrogen storage technologies in varying levels of development. This approach provides a logical methodology and roadmap to enable the identification of hydrogen storage technologies, their advantages/disadvantages, gaps and R&D needs on an unbiased and transparent scale that is easily communicated to interagency partners. The TRA report documents the process used to conduct the TRA, reports the TRL and MRL for each assessed technology and provides recommendations based on the findings.

Symmetry breaking and gap opening in two-dimensional hexagonal lattices

Energy Technology Data Exchange (ETDEWEB)

Malterre, D; Kierren, B; Fagot-Revurat, Y; Didiot, C [Institut Jean Lamour, UMR 7198, Nancy-Universite, BP 239, F-54506 Vandoeuvre-les-Nancy (France); GarcIa de Abajo, F J [Instituto de Optica-CSIC, Serrano 121, 28006 Madrid (Spain); Schiller, F; Ortega, J E [Centro de Fisica de Materiales CSIC/UPV-EHU-Materials Physics Center, Manuel Lardizabal 5, E-20018 San Sebastian (Spain); Cordon, J, E-mail: daniel.malterre@ijl.nancy-universite.fr [Dpto Fisica Aplicada I, Universidad del PaIs Vasco, E-20018 San Sebastian (Spain)

2011-01-15

The inhibition in wave propagation at band gap energies plays a central role in many areas of technology such as electronics (electron gaps), nanophotonics (light gaps) and phononics (acoustic gaps), among others. Here we demonstrate that metal surfaces featuring free-electron-like bands may become semiconducting by periodic nanostructuration. We combine scanning tunneling spectroscopy and angle-resolved photoemisssion to accurately determine the energy-dependent local density of states and band structure of the Ag/Cu(111) noble metal interface patterned with an array of triangular dislocations, demonstrating the existence of a 25 meV band gap that extends over the entire surface Brillouin zone. We prove that this gap is a general consequence of symmetry reduction in close-packed metallic overlayers; in particular, we show that the gap opening is due to the symmetry lowering of the wave vector group at the K point from C{sub 3v} to C{sub 3}.

Standard Modular Hydropower Technology Acceleration Workshop: Summary Report

Energy Technology Data Exchange (ETDEWEB)

Smith, Brennan T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); DeNeale, Scott T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Witt, Adam M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Mobley, Miles H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Fernandez, Alisha R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-08-01

In support of the Department of Energy (DOE) funded Standard Modular Hydropower (SMH) Technology Acceleration project, Oak Ridge National Laboratory (ORNL) staff convened with five small hydropower technology entrepreneurs on June 14 and 15, 2017 to discuss gaps, challenges, and opportunities for small modular hydropower development. The workshop was designed to walk through SMH concepts, discuss the SMH research vision, assess how each participant’s technology aligns with SMH concepts and research, and identify future pathways for mutually beneficial collaboration that leverages ORNL expertise and entrepreneurial industry experience. The goal coming out of the workshop is to advance standardized, scalable, modular hydropower technologies and development approaches with sustained and open dialogue among diverse stakeholder groups.

Incorporating shrub and snag specific LiDAR data into GAP wildlife models

Science.gov (United States)

Teresa J Lorenz; Kerri T Vierling; Jody Vogeler; Jeffrey Lonneker; Jocelyn Aycrigg

2015-01-01

The U.S. Geological Survey’s Gap Analysis Program (hereafter, GAP) is a nationally based program that uses land cover, vertebrate distributions, and land ownership to identify locations where gaps in conservation coverage exist, and GAP products are commonly used by government agencies, nongovernmental organizations, and private citizens. The GAP land-cover...

Integration Of Innovative Technologies And Affective Teaching amp Learning In Programming Courses

Directory of Open Access Journals (Sweden)

Alvin Prasad

2015-08-01

Full Text Available Abstract Technology has been integral component in the teaching and learning process in this millennium. In this review paper we evaluate the different technologies which are used to currently facilitate the teaching and learning of computer programming courses. The aim is to identify problems or gaps in technology usage in the learning environment and suggest affective solutions for technology integration into programming courses at the University levels in the future. We believe that with the inclusion of suggested innovative technologies and affective solutions in programming courses teaching and learning will be attractive and best for the programming industry.

Medical Simulation as a Vital Adjunct to Identifying Clinical Life-Threatening Gaps in Austere Environments.

Science.gov (United States)

Chima, Adaora M; Koka, Rahul; Lee, Benjamin; Tran, Tina; Ogbuagu, Onyebuchi U; Nelson-Williams, Howard; Rosen, Michael; Koroma, Michael; Sampson, John B

2018-04-01

substantial risks to patient care and provides evidence to support the feasibility and value of in-situ simulation-based performance assessment for identifying critical gaps in safe anesthesia care in the low-resource settings. Further investigations may validate the impact and sustainability of simulation based training on skills transfer and retention among anesthesia providers low resource environments. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

The Effect of Technology Integration on High School Students' Literacy Achievement

Science.gov (United States)

Robinson, Kara

2016-01-01

This literature review presents a critical appraisal of current research on the role technology integration plays in high school students' literacy achievement. It identifies the gaps within the research through comprehensive analysis. The review develops an argument that the use of laptops in secondary English classrooms has a significant impact…

Risk and Performance Technologies: Identifying the Keys to Successful Implementation

International Nuclear Information System (INIS)

McClain, Lynn; Smith, Art; O'Regan, Patrick

2002-01-01

The nuclear power industry has been utilizing risk and performance based technologies for over thirty years. Applications of these technologies have included risk assessment (e.g. Individual Plant Examinations), burden reduction (e.g. Risk-Informed Inservice Inspection, RI-ISI) and risk management (Maintenance Rule, 10CFR50.65). Over the last five to ten years the number of risk-informed (RI) burden reduction initiatives has increased. Unfortunately, the efficiencies of some of these applications have been questionable. This paper investigates those attributes necessary to support successful, cost-effective RI-applications. The premise to this paper is that by understanding the key attributes that support one successful application, insights can be gleaned that will streamline/coordinate future RI-applications. This paper is an extension to a paper presented at the Pressure Vessel and Piping (PVP-2001) Conference. In that paper, a number issues and opportunities were identified that needed to be assessed in order to support future (and efficient) RI-applications. It was noted in the paper that a proper understanding and resolution of these issues will facilitate implementation of risk and performance technology in the operation, maintenance and design disciplines. In addition, it will provide the foundation necessary to support regulatory review and approval. (authors)

GaAsP on GaP top solar cells

Science.gov (United States)

Mcneely, J. B.; Negley, G. H.; Barnett, A. M.

1985-01-01

GaAsP on GaP top solar cells as an attachment to silicon bottom solar cells are being developed. The GaAsP on GaP system offers several advantages for this top solar cell. The most important is that the gallium phosphide substrate provides a rugged, transparent mechanical substrate which does not have to be removed or thinned during processing. Additional advantages are that: (1) gallium phosphide is more oxidation resistant than the III-V aluminum compounds, (2) a range of energy band gaps higher than 1.75 eV is readily available for system efficiency optimization, (3) reliable ohmic contact technology is available from the light-emitting diode industry, and (4) the system readily lends itself to graded band gap structures for additional increases in efficiency.

Incorporating the Technology Roadmap Uncertainties into the Project Risk Assessment

International Nuclear Information System (INIS)

Bonnema, B.E.

2002-01-01

This paper describes two methods, Technology Roadmapping and Project Risk Assessment, which were used to identify and manage the technical risks relating to the treatment of sodium bearing waste at the Idaho National Engineering and Environmental Laboratory. The waste treatment technology under consideration was Direct Vitrification. The primary objective of the Technology Roadmap is to identify technical data uncertainties for the technologies involved and to prioritize the testing or development studies to fill the data gaps. Similarly, project management's objective for a multi-million dollar construction project includes managing all the key risks in accordance to DOE O 413.3 - ''Program and Project Management for the Acquisition of Capital Assets.'' In the early stages, the Project Risk Assessment is based upon a qualitative analysis for each risk's probability and consequence. In order to clearly prioritize the work to resolve the technical issues identified in the Technology Roadmap, the issues must be cross- referenced to the project's Risk Assessment. This will enable the project to get the best value for the cost to mitigate the risks

WHO Mental Health Gap Action Programme (mhGAP) Intervention Guide: a systematic review of evidence from low and middle-income countries.

Science.gov (United States)

Keynejad, Roxanne C; Dua, Tarun; Barbui, Corrado; Thornicroft, Graham

2018-02-01

Despite mental, neurological and substance use (MNS) disorders being highly prevalent, there is a worldwide gap between service need and provision. WHO launched its Mental Health Gap Action Programme (mhGAP) in 2008, and the Intervention Guide (mhGAP-IG) in 2010. mhGAP-IG provides evidence-based guidance and tools for assessment and integrated management of priority MNS disorders in low and middle-income countries (LMICs), using clinical decision-making protocols. It targets a non-specialised primary healthcare audience, but has also been used by ministries, non-governmental organisations and academics, for mental health service scale-up in 90 countries. This review aimed to identify evidence to date for mhGAP-IG implementation in LMICs. We searched MEDLINE, Embase, PsycINFO, Web of Knowledge/Web of Science, Scopus, CINAHL, LILACS, SciELO/Web of Science, Cochrane, Pubmed databases and Google Scholar for studies reporting evidence, experience or evaluation of mhGAP-IG in LMICs, in any language. Data were extracted from included papers, but heterogeneity prevented meta-analysis. We conducted a systematic review of evidence to date, of mhGAP-IG implementation and evaluation in LMICs. Thirty-three included studies reported 15 training courses, 9 clinical implementations, 3 country contextualisations, 3 economic models, 2 uses as control interventions and 1 use to develop a rating scale. Our review identified the importance of detailed reports of contextual challenges in the field, alongside detailed protocols, qualitative studies and randomised controlled trials. The mhGAP-IG literature is substantial, relative to other published evaluations of clinical practice guidelines: an important contribution to a neglected field. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

The prototype GAPS (pGAPS) experiment

International Nuclear Information System (INIS)

Mognet, S.A.I.; Aramaki, T.; Bando, N.; Boggs, S.E.; Doetinchem, P. von; Fuke, H.; Gahbauer, F.H.; Hailey, C.J.; Koglin, J.E.; Madden, N.; Mori, K.; Okazaki, S.; Ong, R.A.; Perez, K.M.; Tajiri, G.; Yoshida, T.; Zweerink, J.

2014-01-01

The General Antiparticle Spectrometer (GAPS) experiment is a novel approach for the detection of cosmic ray antiparticles. A prototype GAPS (pGAPS) experiment was successfully flown on a high-altitude balloon in June of 2012. The goals of the pGAPS experiment were: to test the operation of lithium drifted silicon (Si(Li)) detectors at balloon altitudes, to validate the thermal model and cooling concept needed for engineering of a full-size GAPS instrument, and to characterize cosmic ray and X-ray backgrounds. The instrument was launched from the Japan Aerospace Exploration Agency's (JAXA) Taiki Aerospace Research Field in Hokkaido, Japan. The flight lasted a total of 6 h, with over 3 h at float altitude (∼33km). Over one million cosmic ray triggers were recorded and all flight goals were met or exceeded

ROSS Skills, Knowledge, and Abilities Training Evaluation. Gaps and Recommendations

Energy Technology Data Exchange (ETDEWEB)

Ala, Maureen [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gruidl, Jeremiah [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Buddemeier, Brooke [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2015-09-30

This document describes the development of the ROSS SKAs, the cross-mapping of the SKAs to the available training, identifies gaps in the SKA and training, and provides recommendations to address those gaps.

Cochrane systematic reviews are useful to map research gaps for decreasing maternal mortality.

Science.gov (United States)

Chapman, Evelina; Reveiz, Ludovic; Chambliss, Amy; Sangalang, Stephanie; Bonfill, Xavier

2013-01-01

To use an "evidence-mapping" approach to assess the usefulness of Cochrane reviews in identifying research gaps in the maternal health. The article describes the general mapping, prioritizing, reconciling, and updating approach: (1) identifying gaps in the maternal health research using published systematic reviews and formulating research questions, (2) prioritizing questions using Delphi method, (3) reconciling identified research priorities with the existing literature (i.e., searching of ongoing trials in trials registries), (4) updating the process. A comprehensive search of Cochrane systematic reviews published or updated from January 2006 to March 2011 was performed. We evaluated the "Implications for Research" section to identify gaps in the research. Our search strategy identified 695 references; 178 systematic reviews identifying at least one research gap were used. We formulated 319 research questions, which were classified into 11 different categories based on the direct and indirect causes of maternal mortality: postpartum hemorrhage, abortion, hypertensive disorders, infection/sepsis, caesarean section, diabetes, pregnancy prevention, preterm labor, other direct causes, indirect causes, and health policies and systems. Most research questions concerned the effectiveness of clinical interventions, including drugs (42.6%), nonpharmacologic interventions (16.3%), and health system (14.7%). It is possible to identify gaps in the maternal health research by using this approach. Copyright © 2013 Elsevier Inc. All rights reserved.

Plutonium focus area. Technology summary

International Nuclear Information System (INIS)

1997-09-01

The Assistant Secretary for the Office of Environmental Management (EM) at the U.S. Department of Energy (DOE) chartered the Plutonium Focus Area (PFA) in October 1995. The PFA open-quotes...provides for peer and technical reviews of research and development in plutonium stabilization activities...close quotes In addition, the PFA identifies and develops relevant research and technology. The purpose of this document is to focus attention on the requirements used to develop research and technology for stabilization, storage, and preparation for disposition of nuclear materials. The PFA Technology Summary presents the approach the PFA uses to identify, recommend, and review research. It lists research requirements, research being conducted, and gaps where research is needed. It also summarizes research performed by the PFA in the traditional research summary format. This document encourages researchers and commercial enterprises to do business with PFA by submitting research proposals or open-quotes white papers.close quotes In addition, it suggests ways to increase the likelihood that PFA will recommend proposed research to the Nuclear Materials Stabilization Task Group (NMSTG) of DOE

Green Product Purchasing Phenomenon: Exploring The Gaps Of Theoretical, Methodological And Empirical

Directory of Open Access Journals (Sweden)

Rahab Bin Tafsir

2016-12-01

Full Text Available This study aims to identify research gaps on green purchasing topics and proposes several recommendations for future research. To explain the phenomenon of green products  purchase, this study uses Theory of Planned Behavior (TPB in framework. The research uses a  qualitative method approach by conducting a review of articles that traced through four popular journal providers: Ebsco, J-Stors, Proquest and Emeraldinsight. A literature search process held between April, 2015 until Juni, 2015 and resulted on 67 chosen articles. The outcome of the review identified four theoretical gaps, two  methodological gaps and one practical gap.

The prototype GAPS (pGAPS) experiment

Energy Technology Data Exchange (ETDEWEB)

Mognet, S.A.I., E-mail: mognet@astro.ucla.edu [University of California, Los Angeles, CA 90095 (United States); Aramaki, T. [Columbia University, New York, NY 10027 (United States); Bando, N. [Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency (ISAS/JAXA), Sagamihara, Kanagawa 252-5210 (Japan); Boggs, S.E.; Doetinchem, P. von [Space Sciences Laboratory, University of California, Berkeley, CA 94720 (United States); Fuke, H. [Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency (ISAS/JAXA), Sagamihara, Kanagawa 252-5210 (Japan); Gahbauer, F.H.; Hailey, C.J.; Koglin, J.E.; Madden, N. [Columbia University, New York, NY 10027 (United States); Mori, K.; Okazaki, S. [Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency (ISAS/JAXA), Sagamihara, Kanagawa 252-5210 (Japan); Ong, R.A. [University of California, Los Angeles, CA 90095 (United States); Perez, K.M.; Tajiri, G. [Columbia University, New York, NY 10027 (United States); Yoshida, T. [Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency (ISAS/JAXA), Sagamihara, Kanagawa 252-5210 (Japan); Zweerink, J. [University of California, Los Angeles, CA 90095 (United States)

2014-01-21

The General Antiparticle Spectrometer (GAPS) experiment is a novel approach for the detection of cosmic ray antiparticles. A prototype GAPS (pGAPS) experiment was successfully flown on a high-altitude balloon in June of 2012. The goals of the pGAPS experiment were: to test the operation of lithium drifted silicon (Si(Li)) detectors at balloon altitudes, to validate the thermal model and cooling concept needed for engineering of a full-size GAPS instrument, and to characterize cosmic ray and X-ray backgrounds. The instrument was launched from the Japan Aerospace Exploration Agency's (JAXA) Taiki Aerospace Research Field in Hokkaido, Japan. The flight lasted a total of 6 h, with over 3 h at float altitude (∼33km). Over one million cosmic ray triggers were recorded and all flight goals were met or exceeded.

Nearrealtime tracking of gaps in prevention of mothertochild transmission of HIV in three districts of KwaZuluNatal Province South Africa

Directory of Open Access Journals (Sweden)

F Moyo

2018-03-01

Full Text Available Background. Identifying and addressing gaps in the prevention of mother-to-child transmission of HIV (PMTCT is required if South Africa (SA is to achieve targets for eliminating MTCT (eMTCT. Potential PMTCT gaps that increase MTCT risk include late maternal HIV diagnosis, lack of or delayed antiretroviral therapy (ART during pregnancy and breastfeeding, and lack of effective prophylaxis for HIV-exposed infants.Objectives. To investigate, in near real time, PMTCT gaps among HIV-infected infants in three districts of KwaZulu-Natal Province, SA.Methods. Between May and September 2016, PMTCT co-ordinators from eThekwini, uMgungundlovu and uMkhanyakude districts received daily email notification of all HIV polymerase chain reaction (PCR-positive results. Co-ordinators reviewed facility records for each infant to identify gaps in PMTCT care, including maternal age, timing of maternal HIV diagnosis, maternal treatment history and maternal viral load (VL monitoring. Data were submitted via the mobile phone SMS (text message service using Rapid Pro technology and analysed in Stata 14.Results. Data on PMTCT gaps were received for 367 (91.8% of 400 infants with HIV PCR-positive results, within a median time of 12.5 days (interquartile range (IQR 6 - 23. The median maternal age was 25 years (IQR 22 - 30, with 48 teenage mothers (15 - 19 years. The sample size was too small to determine whether there were significant differences in PMTCT gaps between the 48 teenage mothers and 293 older (20 - 34 years mothers. Of the mothers, 220 (60.0% were first diagnosed prior to conception or at their first antenatal care (ANC visit, and 127 (34.6% at or after delivery; 137 (37.3% transmitted HIV to their infants despite receiving >12 weeks of ART. VL results were unavailable for 70.0% of women. Only 41 (17.5% of women known to be HIV-positive during ANC had confirmed virological suppression. No statistically significant differences in PMTCT gaps were observed between

Technology Assessment and Roadmap for the Emergency Radiation Dose Assessment Program

International Nuclear Information System (INIS)

Turteltaub, K W; Hartman-Siantar, C; Easterly, C; Blakely, W

2005-01-01

A Joint Interagency Working Group (JIWG) under the auspices of the Department of Homeland Security Office of Research and Development conducted a technology assessment of emergency radiological dose assessment capabilities as part of the overall need for rapid emergency medical response in the event of a radiological terrorist event in the United States. The goal of the evaluation is to identify gaps and recommend general research and development needs to better prepare the Country for mitigating the effects of such an event. Given the capabilities and roles for responding to a radiological event extend across many agencies, a consensus of gaps and suggested development plans was a major goal of this evaluation and road-mapping effort. The working group consisted of experts representing the Departments of Homeland Security, Health and Human Services (Centers for Disease Control and the National Institutes of Health), Food and Drug Administration, Department of Defense and the Department of Energy's National Laboratories (see appendix A for participants). The specific goals of this Technology Assessment and Roadmap were to: (1) Describe the general context for deployment of emergency radiation dose assessment tools following terrorist use of a radiological or nuclear device; (2) Assess current and emerging dose assessment technologies; and (3) Put forward a consensus high-level technology roadmap for interagency research and development in this area. This report provides a summary of the consensus of needs, gaps and recommendations for a research program in the area of radiation dosimetry for early response, followed by a summary of the technologies available and on the near-term horizon. We then present a roadmap for a research program to bring present and emerging near-term technologies to bear on the gaps in radiation dose assessment and triage. Finally we present detailed supporting discussion on the nature of the threats we considered, the status of technology

Technology Assessment and Roadmap for the Emergency Radiation Dose Assessment Program

Energy Technology Data Exchange (ETDEWEB)

Turteltaub, K W; Hartman-Siantar, C; Easterly, C; Blakely, W

2005-10-03

A Joint Interagency Working Group (JIWG) under the auspices of the Department of Homeland Security Office of Research and Development conducted a technology assessment of emergency radiological dose assessment capabilities as part of the overall need for rapid emergency medical response in the event of a radiological terrorist event in the United States. The goal of the evaluation is to identify gaps and recommend general research and development needs to better prepare the Country for mitigating the effects of such an event. Given the capabilities and roles for responding to a radiological event extend across many agencies, a consensus of gaps and suggested development plans was a major goal of this evaluation and road-mapping effort. The working group consisted of experts representing the Departments of Homeland Security, Health and Human Services (Centers for Disease Control and the National Institutes of Health), Food and Drug Administration, Department of Defense and the Department of Energy's National Laboratories (see appendix A for participants). The specific goals of this Technology Assessment and Roadmap were to: (1) Describe the general context for deployment of emergency radiation dose assessment tools following terrorist use of a radiological or nuclear device; (2) Assess current and emerging dose assessment technologies; and (3) Put forward a consensus high-level technology roadmap for interagency research and development in this area. This report provides a summary of the consensus of needs, gaps and recommendations for a research program in the area of radiation dosimetry for early response, followed by a summary of the technologies available and on the near-term horizon. We then present a roadmap for a research program to bring present and emerging near-term technologies to bear on the gaps in radiation dose assessment and triage. Finally we present detailed supporting discussion on the nature of the threats we considered, the status of

Identifying Health Information Technology Needs of Oncologists to Facilitate the Adoption of Genomic Medicine: Recommendations From the 2016 American Society of Clinical Oncology Omics and Precision Oncology Workshop.

Science.gov (United States)

Hughes, Kevin S; Ambinder, Edward P; Hess, Gregory P; Yu, Peter Paul; Bernstam, Elmer V; Routbort, Mark J; Clemenceau, Jean Rene; Hamm, John T; Febbo, Phillip G; Domchek, Susan M; Chen, James L; Warner, Jeremy L

2017-09-20

At the ASCO Data Standards and Interoperability Summit held in May 2016, it was unanimously decided that four areas of current oncology clinical practice have serious, unmet health information technology needs. The following areas of need were identified: 1) omics and precision oncology, 2) advancing interoperability, 3) patient engagement, and 4) value-based oncology. To begin to address these issues, ASCO convened two complementary workshops: the Omics and Precision Oncology Workshop in October 2016 and the Advancing Interoperability Workshop in December 2016. A common goal was to address the complexity, enormity, and rapidly changing nature of genomic information, which existing electronic health records are ill equipped to manage. The subject matter experts invited to the Omics and Precision Oncology Workgroup were tasked with the responsibility of determining a specific, limited need that could be addressed by a software application (app) in the short-term future, using currently available genomic knowledge bases. Hence, the scope of this workshop was to determine the basic functionality of one app that could serve as a test case for app development. The goal of the second workshop, described separately, was to identify the specifications for such an app. This approach was chosen both to facilitate the development of a useful app and to help ASCO and oncologists better understand the mechanics, difficulties, and gaps in genomic clinical decision support tool development. In this article, we discuss the key challenges and recommendations identified by the workshop participants. Our hope is to narrow the gap between the practicing oncologist and ongoing national efforts to provide precision oncology and value-based care to cancer patients.

Estimating Gender Wage Gaps

Science.gov (United States)

McDonald, Judith A.; Thornton, Robert J.

2011-01-01

Course research projects that use easy-to-access real-world data and that generate findings with which undergraduate students can readily identify are hard to find. The authors describe a project that requires students to estimate the current female-male earnings gap for new college graduates. The project also enables students to see to what…

Counselling users of hearing technology: a comprehensive literature review.

Science.gov (United States)

Meibos, Alex; Muñoz, Karen; Schultz, Jared; Price, Tanner; Whicker, John J; Caballero, Ana; Graham, Laurel

2017-12-01

The purpose of this review is to determine the scope of peer-reviewed empirical research related to counselling in audiology with patients using hearing technology and to identify limitations and gaps to guide recommendations for future research. A rapid evidence assessment was used to identify relevant articles for the review. Eighteen articles met the inclusion criteria. Three themes were identified: (1) audiologist counselling perspectives, (2) counselling communication trends in practice and (3) audiologist experiences with professional training and reported patient outcomes. Findings revealed audiologists are more confident providing information than counselling that addresses adjustment aspects, and other communication gaps have been observed. There is limited research related to counselling in audiology. Audiologists continue to report a need for more training in counselling in their graduate programmes. Additional research is needed to determine effective ways to implement counselling in practice and to improve graduate student supervision for the development of counselling competencies and confidence in using skills in practice.

Identifying the science and technology dimensions of emerging public policy issues through horizon scanning.

Science.gov (United States)

Parker, Miles; Acland, Andrew; Armstrong, Harry J; Bellingham, Jim R; Bland, Jessica; Bodmer, Helen C; Burall, Simon; Castell, Sarah; Chilvers, Jason; Cleevely, David D; Cope, David; Costanzo, Lucia; Dolan, James A; Doubleday, Robert; Feng, Wai Yi; Godfray, H Charles J; Good, David A; Grant, Jonathan; Green, Nick; Groen, Arnoud J; Guilliams, Tim T; Gupta, Sunjai; Hall, Amanda C; Heathfield, Adam; Hotopp, Ulrike; Kass, Gary; Leeder, Tim; Lickorish, Fiona A; Lueshi, Leila M; Magee, Chris; Mata, Tiago; McBride, Tony; McCarthy, Natasha; Mercer, Alan; Neilson, Ross; Ouchikh, Jackie; Oughton, Edward J; Oxenham, David; Pallett, Helen; Palmer, James; Patmore, Jeff; Petts, Judith; Pinkerton, Jan; Ploszek, Richard; Pratt, Alan; Rocks, Sophie A; Stansfield, Neil; Surkovic, Elizabeth; Tyler, Christopher P; Watkinson, Andrew R; Wentworth, Jonny; Willis, Rebecca; Wollner, Patrick K A; Worts, Kim; Sutherland, William J

2014-01-01

Public policy requires public support, which in turn implies a need to enable the public not just to understand policy but also to be engaged in its development. Where complex science and technology issues are involved in policy making, this takes time, so it is important to identify emerging issues of this type and prepare engagement plans. In our horizon scanning exercise, we used a modified Delphi technique. A wide group of people with interests in the science and policy interface (drawn from policy makers, policy adviser, practitioners, the private sector and academics) elicited a long list of emergent policy issues in which science and technology would feature strongly and which would also necessitate public engagement as policies are developed. This was then refined to a short list of top priorities for policy makers. Thirty issues were identified within broad areas of business and technology; energy and environment; government, politics and education; health, healthcare, population and aging; information, communication, infrastructure and transport; and public safety and national security.

Identifying the science and technology dimensions of emerging public policy issues through horizon scanning.

Directory of Open Access Journals (Sweden)

Miles Parker

Full Text Available Public policy requires public support, which in turn implies a need to enable the public not just to understand policy but also to be engaged in its development. Where complex science and technology issues are involved in policy making, this takes time, so it is important to identify emerging issues of this type and prepare engagement plans. In our horizon scanning exercise, we used a modified Delphi technique. A wide group of people with interests in the science and policy interface (drawn from policy makers, policy adviser, practitioners, the private sector and academics elicited a long list of emergent policy issues in which science and technology would feature strongly and which would also necessitate public engagement as policies are developed. This was then refined to a short list of top priorities for policy makers. Thirty issues were identified within broad areas of business and technology; energy and environment; government, politics and education; health, healthcare, population and aging; information, communication, infrastructure and transport; and public safety and national security.

Identifying the Science and Technology Dimensions of Emerging Public Policy Issues through Horizon Scanning

Science.gov (United States)

Parker, Miles; Acland, Andrew; Armstrong, Harry J.; Bellingham, Jim R.; Bland, Jessica; Bodmer, Helen C.; Burall, Simon; Castell, Sarah; Chilvers, Jason; Cleevely, David D.; Cope, David; Costanzo, Lucia; Dolan, James A.; Doubleday, Robert; Feng, Wai Yi; Godfray, H. Charles J.; Good, David A.; Grant, Jonathan; Green, Nick; Groen, Arnoud J.; Guilliams, Tim T.; Gupta, Sunjai; Hall, Amanda C.; Heathfield, Adam; Hotopp, Ulrike; Kass, Gary; Leeder, Tim; Lickorish, Fiona A.; Lueshi, Leila M.; Magee, Chris; Mata, Tiago; McBride, Tony; McCarthy, Natasha; Mercer, Alan; Neilson, Ross; Ouchikh, Jackie; Oughton, Edward J.; Oxenham, David; Pallett, Helen; Palmer, James; Patmore, Jeff; Petts, Judith; Pinkerton, Jan; Ploszek, Richard; Pratt, Alan; Rocks, Sophie A.; Stansfield, Neil; Surkovic, Elizabeth; Tyler, Christopher P.; Watkinson, Andrew R.; Wentworth, Jonny; Willis, Rebecca; Wollner, Patrick K. A.; Worts, Kim; Sutherland, William J.

2014-01-01

Public policy requires public support, which in turn implies a need to enable the public not just to understand policy but also to be engaged in its development. Where complex science and technology issues are involved in policy making, this takes time, so it is important to identify emerging issues of this type and prepare engagement plans. In our horizon scanning exercise, we used a modified Delphi technique [1]. A wide group of people with interests in the science and policy interface (drawn from policy makers, policy adviser, practitioners, the private sector and academics) elicited a long list of emergent policy issues in which science and technology would feature strongly and which would also necessitate public engagement as policies are developed. This was then refined to a short list of top priorities for policy makers. Thirty issues were identified within broad areas of business and technology; energy and environment; government, politics and education; health, healthcare, population and aging; information, communication, infrastructure and transport; and public safety and national security. PMID:24879444

Applying Sensor-Based Technology to Improve Construction Safety Management.

Science.gov (United States)

Zhang, Mingyuan; Cao, Tianzhuo; Zhao, Xuefeng

2017-08-11

Construction sites are dynamic and complicated systems. The movement and interaction of people, goods and energy make construction safety management extremely difficult. Due to the ever-increasing amount of information, traditional construction safety management has operated under difficult circumstances. As an effective way to collect, identify and process information, sensor-based technology is deemed to provide new generation of methods for advancing construction safety management. It makes the real-time construction safety management with high efficiency and accuracy a reality and provides a solid foundation for facilitating its modernization, and informatization. Nowadays, various sensor-based technologies have been adopted for construction safety management, including locating sensor-based technology, vision-based sensing and wireless sensor networks. This paper provides a systematic and comprehensive review of previous studies in this field to acknowledge useful findings, identify the research gaps and point out future research directions.

Review of decontamination technologies for chemical counter-terrorism

Energy Technology Data Exchange (ETDEWEB)

Volchek, K.; Boudreau, L.; Hornof, M. [SAIC Canada, Ottawa, ON (Canada); Fingas, M.F.; Gamble, R.L. [Environment Canada, Ottawa, ON (Canada). Emergencies Science and Technology Div]|[Environment Canada, Ottawa, ON (Canada). River Road Environmental Technology Centre

2004-07-01

The two categories of chemical agents that could be used in acts of chemical terrorism are conventional chemical warfare agents and commercial toxic chemicals. Industrial chemicals are easier to access than warfare agents, and must therefore be considered when evaluating decontamination techniques. This study involved a search of public-domain documents to identify decontamination technologies including: physical/mechanical treatment or removal; chemical treatment; and, biological methods including natural degradation and attenuation. The technologies were analyzed with reference to their effectiveness for specific groups of chemical agents, state of development, availability and costs. Results indicate that there are many decontamination methods available, both developed and under development, that work effectively for most agents. The two most common decontamination methods are oxidation and alkali hydrolysis followed by dehalogenation. Technology limitations and gaps were also identified, suggesting a need for more research to further the development of promising processes. 31 refs., 2 tabs.

Photonic band gap engineering in 2D photonic crystals

Indian Academy of Sciences (India)

Department of Applied Physics, Delhi College of Engineering, Faculty of Technology. (University of ... Photonic crystal; photonic band gap; plane-wave expansion method. PACS Nos 71.20 .... Numerical analysis and results. To obtain the ...

School Counselors: Closing Achievement Gaps and Writing Results Reports

Science.gov (United States)

Hartline, Julie; Cobia, Debra

2012-01-01

Charged with closing the achievement gap for marginalized students, school counselors need to be able to identify gaps, develop interventions, evaluate effectiveness, and share results. This study examined 100 summary results reports submitted by school counselors after having received four days of training on the ASCA National Model. Findings…

Mind the Gap: Assessing the Disconnect Between Postpartum Health Information Desired and Health Information Received.

Science.gov (United States)

Guerra-Reyes, Lucia; Christie, Vanessa M; Prabhakar, Annu; Siek, Katie A

Seeking and receiving health information are critical aspects of prenatal and postpartum care; however, many informational sources lack postpartum content. This study explores the gaps between information desired and information received postpartum and identifies the sources women use for health information seeking, with an emphasis on emergent online and mobile phone-based resources. Participants were recruited from our community partners' client base for a cross-sectional study. Mothers (n = 77) of a child 48 months or younger completed a survey on health information seeking, health information needs, and technology use. Postpartum health information gaps were defined as topics about which a participant indicated that she wanted information, but did not receive information. Bivariate analyses assessed the association between demographic characteristics, sources of health information used during pregnancy, and postpartum information gaps. Health care providers, Internet-based resources, and mobile applications were common sources of health information during pregnancy. Mental and sexual health were the most common types of postpartum health information gaps. In bivariate analyses, higher income and education were associated with postpartum information gaps in mental health and sexual health, respectively (p higher levels of education and income and postpartum health information gaps were observed in bivariate analyses. Health educators have the opportunity to capitalize on high rates of Internet information seeking by providing health information online. Health care providers must incorporate mental and sexual health into routine postpartum care. Copyright © 2016 Jacobs Institute of Women's Health. Published by Elsevier Inc. All rights reserved.

Identification of remediation needs and technology development focus areas for the Environmental Restoration (ER) Project at Sandia National Laboratories/New Mexico (SNL/NM)

International Nuclear Information System (INIS)

Tucker, M.D.

1995-06-01

The Environmental Restoration (ER) Project has been tasked with the characterization, assessment, remediation and long-term monitoring of contaminated waste sites at Sandia National Laboratories/New Mexico (SNL/NM). Many of these sites will require remediation which will involve the use of baseline technologies, innovative technologies that are currently under development, and new methods which will be developed in the near future. The Technology Applications Program (TAP) supports the ER Project and is responsible for development of new technologies for use at the contaminated waste sites, including technologies that will be used for remediation and restoration of these sites. The purpose of this report is to define the remediation needs of the ER Project and to identify those remediation needs for which the baseline technologies and the current development efforts are inadequate. The area between the remediation needs and the existing baseline/innovative technology base represents a technology gap which must be filled in order to remediate contaminated waste sites at SNL/NM economically and efficiently. In the first part of this report, the remediation needs of the ER Project are defined by both the ER Project task leaders and by TAP personnel. The next section outlines the baseline technologies, including EPA defined Best Demonstrated Available Technologies (BDATs), that are applicable at SNL/NM ER sites. This is followed by recommendations of innovative technologies that are currently being developed that may also be applicable at SNL/NM ER sites. Finally, the gap between the existing baseline/innovative technology base and the remediation needs is identified. This technology gap will help define the future direction of technology development for the ER Project

Closing the Gap: The Maturing of Quality Assurance in Australian University Libraries

Science.gov (United States)

Tang, Karen

2012-01-01

A benchmarking review of the quality assurance practices of the libraries of the Australian Technology Network conducted in 2006 revealed exemplars of best practice, but also sector-wide gaps. A follow-up review in 2010 indicated the best practices that remain relevant. While some gaps persist, there has been improvement across the libraries and…

Understanding the Knowledge Gap Experienced by U.S. Safety Net Patients in Teleretinal Screening.

Science.gov (United States)

George, Sheba M; Hayes, Erin Moran; Fish, Allison; Daskivich, Lauren Patty; Ogunyemi, Omolola I

2016-01-01

Safety-net patients' socioeconomic barriers interact with limited digital and health literacies to produce a "knowledge gap" that impacts the delivery of healthcare via telehealth technologies. Six focus groups (2 African- American and 4 Latino) were conducted with patients who received teleretinal screening in a U.S. urban safety-net setting. Focus groups were analyzed using a modified grounded theory methodology. Findings indicate that patients' knowledge gap is primarily produced at three points during the delivery of care: (1) exacerbation of patients' pre-existing personal barriers in the clinical setting; (2) encounters with technology during screening; and (3) lack of follow up after the visit. This knowledge gap produces confusion, potentially limiting patients' perceptions of care and their ability to manage their own care. It may be ameliorated through delivery of patient education focused on both disease pathology and specific role of telehealth technologies in disease management.

Closing the Gender Gap in the Technology Major

Science.gov (United States)

Jung, Laura; Clark, Ulku; Patterson, Laurie; Pence, Toni

2017-01-01

Technology makes up our daily lives and is a part of everything we do. The tech job market is expanding with more and more jobs needing to be filled by those with the necessary qualifications. Students are realizing the vast opportunities a career in technology can offer them and many are making the conscience decision to major in a technical…

An Investigation of Relationships between Internal and External Factors Affecting Technology Integration in Classrooms

Science.gov (United States)

Hur, Jung Won; Shannon, David; Wolf, Sara

2016-01-01

Various factors affecting technology integration have been identified, but little research has examined the relationships between factors, especially internal and external ones, and whether they directly or indirectly influenced each other. To fill this research gap, this study examined the significance and relationships of five factors…

Learning in context: identifying gaps in research on the transfer of medical communication skills to the clinical workplace.

Science.gov (United States)

van den Eertwegh, Valerie; van Dulmen, Sandra; van Dalen, Jan; Scherpbier, Albert J J A; van der Vleuten, Cees P M

2013-02-01

In order to reduce the inconsistencies of findings and the apparent low transfer of communication skills from training to medical practice, this narrative review identifies some main gaps in research on medical communication skills training and presents insights from theories on learning and transfer to broaden the view for future research. Relevant literature was identified using Pubmed, GoogleScholar, Cochrane database, and Web of Science; and analyzed using an iterative procedure. Research findings on the effectiveness of medical communication training still show inconsistencies and variability. Contemporary theories on learning based on a constructivist paradigm offer the following insights: acquisition of knowledge and skills should be viewed as an ongoing process of exchange between the learner and his environment, so called lifelong learning. This process can neither be atomized nor separated from the context in which it occurs. Four contemporary approaches are presented as examples. The following shift in focus for future research is proposed: beyond isolated single factor effectiveness studies toward constructivist, non-reductionistic studies integrating the context. Future research should investigate how constructivist approaches can be used in the medical context to increase effective learning and transition of communication skills. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

An exploratory study on the gaps and pathways to the Korean fusion DEMO

International Nuclear Information System (INIS)

Kim, Hyuck Jong; Heo, Gyunyoung; Kim, Hyung Chan; Yeom, Jun Ho; Kim, Jong Kyung; Lee, Young-seok; Kwon, Myeun; Lee, Gyung-Su; Kim, Yong-soo; Kim, Eunbae; Lee, Chul-sik

2012-01-01

With the vision of being an early demonstrator of fusion energy, the strategic plans for the Fusion DEMO program of Korea (K-DEMO program) has been developed. A staged development of the K-DEMO plant was considered in the strategic plans as to verify technical feasibility in the first stage and economic feasibility in the second stage. The top-tier design requirements and assumptions of the first stage K-DEMO plant are defined and postulated. With these requirements and assumptions, the desired and current status of nuclear fusion technologies are compared to identify the gaps to be filled to design, fabricate, construct, and operate it. The pathways from KSTAR, ITER to K-DEMO plant have also been studied to identify R and D activities for K-DEMO program that are to go in parallel with KSTAR and ITER are extracted from the pathways. Cross-cutting with the fusion R and D activities of the other countries and utilizing the commonalities with the existing systems are discussed with the provision of open-innovation strategy that is one of the key strategies of K-DEMO program. The priority of the R and D activities of K-DEMO program is qualitatively determined in consideration of the gaps, cross-cutting, and risks associated with the R and D investments.

Intangibles and the gender wage gap: An analysis of gender wage gaps across occupations in the Finnish private sector

OpenAIRE

Asplund, Rita; Napari, Sami

2011-01-01

The paper compares the gender wage differentials of two occupation groups - innovation and non-innovation workers - separately for manufacturing and services using Finnish private-sector data. We apply a decomposition method based on unconditional quantile regression techniques to identify key factors underlying the gender wage gaps observed along the whole wage distribution, as well as changes in these wage gaps between 2002 and 2009. This more nuanced approach provides important new insight...

In-Space Structural Assembly: Applications and Technology

Science.gov (United States)

Belvin, W. Keith; Doggett, Bill R.; Watson, Judith J.; Dorsey, John T.; Warren, Jay; Jones, Thomas C.; Komendera, Erik E.; Mann, Troy O.; Bowman, Lynn

2016-01-01

As NASA exploration moves beyond earth's orbit, the need exists for long duration space systems that are resilient to events that compromise safety and performance. Fortunately, technology advances in autonomy, robotic manipulators, and modular plug-and-play architectures over the past two decades have made in-space vehicle assembly and servicing possible at acceptable cost and risk. This study evaluates future space systems needed to support scientific observatories and human/robotic Mars exploration to assess key structural design considerations. The impact of in-space assembly is discussed to identify gaps in structural technology and opportunities for new vehicle designs to support NASA's future long duration missions.

Proceedings of Wireless Technology in the Electric Power Industry Workshop

International Nuclear Information System (INIS)

2001-01-01

A one-day workshop was conducted at EPRI Charlotte to identify technology issues related to wireless technology in nuclear power plants. The meeting concluded with a roundtable discussion to determine what projects could be conducted to address opportunities and gaps in this technology; the three projects recommended for further investigation were a risk analysis, development of a technology strategy, and development of guidelines for reliable implementation of wireless technologies. The Proceedings CD includes workshop presentations in PowerPoint format. The presentations cover the following topics: (1) Wireless Project at TXU: Integration of Voice, Data, and Video; (2) Radio Upgrade Project at Public Service Electric and Gas Company (PSE and G) of New Jersey; and (3) Operational Experience with Wireless Communication at Nuclear Plants

In Situ Remediation Integrated Program: Evaluation and assessment of containment technology

International Nuclear Information System (INIS)

Gerber, M.A.; Fayer, M.J.

1994-06-01

Containment technology refers to a broad range of methods that are used to contain waste or contaminated groundwater and to keep uncontaminated water from entering a waste site. The U.S. Department of Energy's (DOE) Office of Technology Development has instituted the In Situ Remediation Integrated Program (ISRIP) to advance the state-of-the-art of innovative technologies that contain or treat, in situ, contaminated media such as soil and groundwater, to the point of demonstration and to broaden the applicability of these technologies to the widely varying site remediation requirements throughout the DOE complex. The information provided here is an overview of the state-of-the-art of containment technology and includes a discussion of ongoing development projects; identifies the technical gaps; discusses the priorities for resolution of the technical gaps; and identifies the site parameters affecting the application of a specific containment method. The containment technology described in this document cover surface caps; vertical barriers such as slurry walls, grout curtains, sheet pilings, frozen soil barriers, and vitrified barriers; horizontal barriers; sorbent barriers; and gravel layers/curtains. Within DOE, containment technology could be used to prevent water infiltration into buried waste; to provide for long-term containment of pits, trenches, and buried waste sites; for the interim containment of leaking underground storage tanks and piping; for the removal of contaminants from groundwater to prevent contamination from migrating off-site; and as an interim measure to prevent the further migration of contamination during the application of an in situ treatment technology such as soil flushing. The ultimate goal is the implementation of containment technology at DOE sites as a cost-effective, efficient, and safe choice for environmental remediation and restoration activities

Project Management Plan for the INEL technology logic diagrams

International Nuclear Information System (INIS)

Rudin, M.J.

1992-10-01

This Project Management Plan (PjMP) describes the elements of project planning and control that apply to activities outlined in Technical Task Plan (TTP) ID-121117, ''Technology Logic Diagrams For The INEL.'' The work on this project will be conducted by personnel in EG ampersand G Idaho, Inc.'s Waste Technology Development Program. Technology logic diagrams represent a formal methodology to identify technology gaps or needs within Environmental Restoration/Waste Management Operations, which will focus on Office of Environmental Restoration and Waste Management (EM-50) research and development, demonstration, test, and evaluation efforts throughout the US Department of Energy complex. This PjMP describes the objectives, organization, roles and responsibilities, workscope and processes for implementing and managing the technology logic diagram for the Idaho National Engineering Laboratory project

Gap analysis of Mycoplasma bovis disease, diagnosis and control: An aid to identify future development requirements.

Science.gov (United States)

Calcutt, M J; Lysnyansky, I; Sachse, K; Fox, L K; Nicholas, R A J; Ayling, R D

2018-05-01

There is a worldwide problem of disease caused by Mycoplasma (M.) bovis in cattle; it has a significant detrimental economic and animal welfare impact on cattle rearing. Infection can manifest as a plethora of clinical signs including mastitis, pneumonia, arthritis, keratoconjunctivitis, otitis media and genital disorders that may result in infertility and abortion. Current diagnosis and control information are reviewed and analysed to identify gaps in knowledge of the causative organism in respect of the disease pathology, diagnosis and control methods. The main considerations are as follows: no vaccines are commercially available; antimicrobial resistance is increasing; diagnostic and antimicrobial sensitivity testing needs to be improved; and a pen-side test would facilitate more rapid diagnosis and implementation of treatment with antimicrobials. More data on host susceptibility, stress factors, immune response and infectious dose levels are required. The impact of asymptomatic carriers, M. bovis survival in the environment and the role of wildlife in transmitting the disease also needs investigation. To facilitate development of vaccines, further analysis of more M. bovis genomes, its pathogenic mechanisms, including variable surface proteins, is required, along with reproducible disease models. © 2018 Blackwell Verlag GmbH.

Technologies in organic farming

DEFF Research Database (Denmark)

Lassen, Jesper

2015-01-01

the nutrient gap by recycling sewage sludge, and in particular the criteria applied when these technologies are assessed, are analysed. This part of the analysis shows how organic consumers base their assessment of alternative strategies and technologies primarily on concerns about environmental risks...... to phase out their use of conventional manure before 2021. This, however, raises a number of questions about consumers’ acceptance of the alternative technologies that have been proposed to close the nutrient gap. Drawing on qualitative interviews with Danish organic consumers, this paper first discusses...... what, from a consumers perspective, characterizes the technologies consumers associate with organic production. This part of the analysis shows that by and large consumers regard organic technologies as the opposite of conventional farming. Second, consumers’ perceptions of solutions suggested to close...

Performance-Based Technology Selection Filter description report. INEL Buried Waste Integrated Demonstration System Analysis project

Energy Technology Data Exchange (ETDEWEB)

O`Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

1992-05-01

A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL).

Technology strategy for cost-effective drilling and intervention; Technology Target Areas; TTA4 - Cost effective drilling and intervention

Energy Technology Data Exchange (ETDEWEB)

2007-07-01

The main goals of the OG21 initiative are to (1) develop new technology and knowledge to increase the value creation of Norwegian oil and gas resources and (2) enhance the export of Norwegian oil and gas technology. The OG21 Cost-effective Drilling and Intervention (CEDI) Technology Target Area (TTA) has identified some key strategic drilling and well intervention needs to help meet the goals of OG21. These key strategic drilling and well intervention needs are based on a review of present and anticipated future offshore-Norway drilling and well intervention conditions and the Norwegian drilling and well intervention industry. A gap analysis has been performed to assess the extent to which current drilling and well intervention research and development and other activities will meet the key strategic needs. Based on the identified strategic drilling and well intervention needs and the current industry res each and development and other activities, the most important technology areas for meeting the OG21 goals are: environment-friendly and low-cost exploration wells; low-cost methods for well intervention/sidetracks; faster and extended-reach drilling; deep water drilling, completion and intervention; offshore automated drilling; subsea and sub-ice drilling; drilling through basalt and tight carbonates; drilling and completion in salt formation. More specific goals for each area: reduce cost of exploration wells by 50%; reduce cost for well intervention/sidetracks by 50%; increase drilling efficiency by 40%; reduce drilling cost in deep water by 40 %; enable offshore automated drilling before 2012; enable automated drilling from seabed in 2020. Particular focus should be placed on developing new technology for low-cost exploration wells to stem the downward trends in the number of exploration wells drilled and the volume of discovered resources. The CEDI TTA has the following additional recommendations: The perceived gaps in addressing the key strategic drilling and

The Oncogenic Role of RhoGAPs in Basal-Like Breast Cancer

Science.gov (United States)

2016-04-01

mouse models . c) In vivo tumorigenesis and metastasis assays. Milestones: Identify whether ArhGAP11A and RacGAP1 can promote tumor growth and/or...proteins. RacGAP1 is a component of the centralspindlin complex during mitosis and cytokinesis, but its function during interphase is not well...switches: Rho GTPase regulation during animal cell mitosis . Cell Signal 2014;26:2998-3006. 30. Zhao WM, Fang G. MgcRacGAP controls the assembly of the

Using Active Learning to Identify Health Information Technology Related Patient Safety Events.

Science.gov (United States)

Fong, Allan; Howe, Jessica L; Adams, Katharine T; Ratwani, Raj M

2017-01-18

The widespread adoption of health information technology (HIT) has led to new patient safety hazards that are often difficult to identify. Patient safety event reports, which are self-reported descriptions of safety hazards, provide one view of potential HIT-related safety events. However, identifying HIT-related reports can be challenging as they are often categorized under other more predominate clinical categories. This challenge of identifying HIT-related reports is exacerbated by the increasing number and complexity of reports which pose challenges to human annotators that must manually review reports. In this paper, we apply active learning techniques to support classification of patient safety event reports as HIT-related. We evaluated different strategies and demonstrated a 30% increase in average precision of a confirmatory sampling strategy over a baseline no active learning approach after 10 learning iterations.

Structural Dynamics of Tropical Moist Forest Gaps

Science.gov (United States)

Hunter, Maria O.; Keller, Michael; Morton, Douglas; Cook, Bruce; Lefsky, Michael; Ducey, Mark; Saleska, Scott; de Oliveira, Raimundo Cosme; Schietti, Juliana

2015-01-01

Gap phase dynamics are the dominant mode of forest turnover in tropical forests. However, gap processes are infrequently studied at the landscape scale. Airborne lidar data offer detailed information on three-dimensional forest structure, providing a means to characterize fine-scale (1 m) processes in tropical forests over large areas. Lidar-based estimates of forest structure (top down) differ from traditional field measurements (bottom up), and necessitate clear-cut definitions unencumbered by the wisdom of a field observer. We offer a new definition of a forest gap that is driven by forest dynamics and consistent with precise ranging measurements from airborne lidar data and tall, multi-layered tropical forest structure. We used 1000 ha of multi-temporal lidar data (2008, 2012) at two sites, the Tapajos National Forest and Ducke Reserve, to study gap dynamics in the Brazilian Amazon. Here, we identified dynamic gaps as contiguous areas of significant growth, that correspond to areas > 10 m2, with height gap at Tapajos National Forest (4.8 %) as compared to Ducke Reserve (2.0 %). On average, gaps were smaller at Ducke Reserve and closed slightly more rapidly, with estimated height gains of 1.2 m y-1 versus 1.1 m y-1 at Tapajos. At the Tapajos site, height growth in gap centers was greater than the average height gain in gaps (1.3 m y-1 versus 1.1 m y-1). Rates of height growth between lidar acquisitions reflect the interplay between gap edge mortality, horizontal ingrowth and gap size at the two sites. We estimated that approximately 10 % of gap area closed via horizontal ingrowth at Ducke Reserve as opposed to 6 % at Tapajos National Forest. Height loss (interpreted as repeat damage and/or mortality) and horizontal ingrowth accounted for similar proportions of gap area at Ducke Reserve (13 % and 10 %, respectively). At Tapajos, height loss had a much stronger signal (23 % versus 6 %) within gaps. Both sites demonstrate limited gap contagiousness defined by an

The influence of organic production on food quality - research findings, gaps and future challenges

DEFF Research Database (Denmark)

Załęcka, Aneta; Bügel, Susanne Gjedsted; Paoletti, Flavio

2014-01-01

in order to identify research gaps and suggest future research challenges. Organic food is described according to a quality model already published. The influence of organic production on food quality is structured in primary production and processing. Furthermore, organic food authentication is discussed...... with so called 'conventional' food seems not to be appropriate, because 'conventional' is not defined. In organic food quality research a system approach is needed from which systemic markers can be selected. Research on the impact of processing technologies on the quality according to organic principles...

Identifying 21st Century STEM Competencies Using Workplace Data

Science.gov (United States)

Jang, Hyewon

2016-04-01

Gaps between science, technology, engineering, and mathematics (STEM) education and required workplace skills have been identified in industry, academia, and government. Educators acknowledge the need to reform STEM education to better prepare students for their future careers. We pursue this growing interest in the skills needed for STEM disciplines and ask whether frameworks for 21st century skills and engineering education cover all of important STEM competencies. In this study, we identify important STEM competencies and evaluate the relevance of current frameworks applied in education using the standardized job-specific database operated and maintained by the US Department of Labor. Our analysis of the importance of 109 skills, types of knowledge and work activities, revealed 18 skills, seven categories of knowledge, and 27 work activities important for STEM workers. We investigate the perspectives of STEM and non-STEM job incumbents, comparing the importance of each skill, knowledge, and work activity for the two groups. We aimed to condense dimensions of the 52 key areas by categorizing them according to the Katz and Kahn (1978) framework and testing for inter-rater reliability. Our findings show frameworks for 21st century skills and engineering education do not encompass all important STEM competencies. Implications for STEM education programs are discussed, including how they can bridge gaps between education and important workplace competencies.

Environmental measurements and technology for non-proliferation objectives. Final report

International Nuclear Information System (INIS)

Broadway, J.A.

1998-01-01

The purpose of this study is to identify multi-disciplinary and single focus laboratories from the environmental and public health communities that can serve as technical center of opportunity for nuclear, inorganic and organic analyses. The objectives of the Office of Research and Development effort are twofold: (1) to identify the technology shortcomings and technologies gaps (thus requirements) within these communities that could benefit from state-of-the-art infield analysis technologies currently under development and (2) to promote scientist-to-scientist dialog and technical exchange under such existing US government internship programs (eg SABIT/USDOC) to improve skills and work relationships. Although the data analysis will focus on environmentally sensitive signatures and materials, the office of Research and Development wishes to further its nuclear non-proliferation objectives by assessing the current technical skill and ingenious analytical tools in less-developed countries so as to broaden the base of capability for multi-species measurement technology development

Sustainability Tools Inventory Initial Gap Analysis

Science.gov (United States)

This report identifies a suite of tools that address a comprehensive set of community sustainability concerns. The objective is to discover whether "gaps" exist in the tool suite’s analytic capabilities. These tools address activities that significantly influence resource consu...

Race, ethnicity, recreation, and leisure: An assessment of research gaps

Science.gov (United States)

Edwin Gomez

2008-01-01

The purpose of this report is to identify research gaps related to the race/ethnicity and leisure literature. This was done by first highlighting the trends involved in the ethnicity and leisure literature, and then presenting five gaps found in the literature for future researchers to consider.

Refining Current Scientific Priorities and Identifying New Scientific Gaps in HIV-Related Heart, Lung, Blood, and Sleep Research.

Science.gov (United States)

Twigg, Homer L; Crystal, Ronald; Currier, Judith; Ridker, Paul; Berliner, Nancy; Kiem, Hans-Peter; Rutherford, George; Zou, Shimian; Glynn, Simone; Wong, Renee; Peprah, Emmanuel; Engelgau, Michael; Creazzo, Tony; Colombini-Hatch, Sandra; Caler, Elisabet

2017-09-01

The National Heart, Lung, and Blood Institute (NHLBI) AIDS Program's goal is to provide direction and support for research and training programs in areas of HIV-related heart, lung, blood, and sleep (HLBS) diseases. To better define NHLBI current HIV-related scientific priorities and with the goal of identifying new scientific priorities and gaps in HIV-related HLBS research, a wide group of investigators gathered for a scientific NHLBI HIV Working Group on December 14-15, 2015, in Bethesda, MD. The core objectives of the Working Group included discussions on: (1) HIV-related HLBS comorbidities in the antiretroviral era; (2) HIV cure; (3) HIV prevention; and (4) mechanisms to implement new scientific discoveries in an efficient and timely manner so as to have the most impact on people living with HIV. The 2015 Working Group represented an opportunity for the NHLBI to obtain expert advice on HIV/AIDS scientific priorities and approaches over the next decade.

The Adaptation Finance Gap Update - with insights from the INDCs

DEFF Research Database (Denmark)

Olhoff, Anne; Bee, Skylar; Puig, Daniel

In 2014 the United Nations Environment Programme (UNEP) published its first global Adaptation Gap Report (AGR 2014) (UNEP, 2014), which put forward a preliminary framework for assessing adaptation gaps along with an initial assessment in three selected areas: finance, technology and knowledge....... Further to the positive reception of this report, several countries requested UNEP to produce follow up reports focusing on specific adaptation gaps. In response to these requests, UNEP has commissioned a new report with a special focus on finance gaps and options to bridge them. The report...... will be published in the spring of 2016. This update is intended as an input to discussions at the 21st session of the Conference of the Parties (COP 21) to the United Nations Framework Convention on Climate Change (UNFCCC). It brings together key findings on adaptation costs and finance from AGR 2014...

Using satellite data to identify the causes of and potential solutions for yield gaps in India’s Wheat Belt

Science.gov (United States)

Jain, M.; Singh, Balwinder; Srivastava, A. A. K.; Malik, R. K.; McDonald, A. J.; Lobell, D. B.

2017-09-01

Food security will be increasingly challenged by climate change, natural resource degradation, and population growth. Wheat yields, in particular, have already stagnated in many regions and will be further affected by warming temperatures. Despite these challenges, wheat yields can be increased by improving management practices in regions with existing yield gaps. To identify the magnitude and causes of current yield gaps in India, one of the largest wheat producers globally, we produced 30 meter resolution yield maps from 2001 to 2015 across the Indo-Gangetic Plains (IGP), the nation’s main wheat belt. Yield maps were derived using a new method that translates satellite vegetation indices to yield estimates using crop model simulations, bypassing the need for ground calibration data. This is one of the first attempts to apply this method to a smallholder agriculture system, where ground calibration data are rarely available. We find that yields can be increased by 11% on average and up to 32% in the eastern IGP by improving management to current best practices within a given district. Additionally, if current best practices from the highest-yielding state of Punjab are implemented in the eastern IGP, yields could increase by almost 110%. Considering the factors that most influence yields, later sow dates and warmer temperatures are most associated with low yields across the IGP. This suggests that strategies to reduce the negative effects of heat stress, like earlier sowing and planting heat-tolerant wheat varieties, are critical to increasing wheat yields in this globally-important agricultural region.

Filling the Data Gaps in Mountain Climate Observatories Through Advanced Technology, Refined Instrument Siting, and a Focus on Gradients

Directory of Open Access Journals (Sweden)

Scotty Strachan

2016-11-01

Full Text Available The mountain research community is still contending with the need to monitor ecosystems, both to improve local management practices and to address regional and global science questions related to the Future Earth themes of Dynamic Planet, Global Sustainable Development, and Transformations Towards Sustainability. How such efforts may be designed and coordinated remains an open question. Historical climate and ecological observatories and networks typically have not represented the scope or spatial and topographic distribution of near-surface processes in mountains, creating knowledge gaps. Grassroots, in situ investigations have revealed the existence of topoclimates that are not linearly related to general atmospheric conditions, and are also not adequately represented in gridded model products. In this paper, we describe how some of the disconnects between data, models, and applications in mountains can be addressed using a combination of gradient monitoring, uniform observational siting and standards, and modern technology (cyberinfrastructure. Existing observational studies need to expand their topographic niches, and future observatories should be planned to span entire gradients. Use of cyberinfrastructure tools such as digital telemetry and Internet Protocol networks can reduce costs and data gaps while improving data quality control processes and widening audience outreach. Embracing this approach and working toward common sets of comparable measurements should be goals of emerging mountain observatories worldwide.

Growth of Wide Band Gap II-VI Compound Semiconductors by Physical Vapor Transport

Science.gov (United States)

Su, Ching-Hua; Sha, Yi-Gao

1995-01-01

The studies on the crystal growth and characterization of II-VI wide band gap compound semiconductors, such as ZnTe, CdS, ZnSe and ZnS, have been conducted over the past three decades. The research was not quite as extensive as that on Si, III-V, or even narrow band gap II-VI semiconductors because of the high melting temperatures as well as the specialized applications associated with these wide band gap semiconductors. In the past several years, major advances in the thin film technology such as Molecular Beam Epitaxy (MBE) and Metal Organic Chemical Vapor Deposition (MOCVD) have demonstrated the applications of these materials for the important devices such as light-emitting diode, laser and ultraviolet detectors and the tunability of energy band gap by employing ternary or even quaternary systems of these compounds. At the same time, the development in the crystal growth of bulk materials has not advanced far enough to provide low price, high quality substrates needed for the thin film growth technology.

Trends in publications regarding evidence-practice gaps: a literature review.

Science.gov (United States)

Evensen, Ann E; Sanson-Fisher, Rob; D'Este, Catherine; Fitzgerald, Michael

2010-02-03

Well-designed trials of strategies to improve adherence to clinical practice guidelines are needed to close persistent evidence-practice gaps. We studied how the number of these trials is changing with time, and to what extent physicians are participating in such trials. This is a literature-based study of trends in evidence-practice gap publications over 10 years and participation of clinicians in intervention trials to narrow evidence-practice gaps. We chose nine evidence-based guidelines and identified relevant publications in the PubMed database from January 1998 to December 2007. We coded these publications by study type (intervention versus non-intervention studies). We further subdivided intervention studies into those for clinicians and those for patients. Data were analyzed to determine if observed trends were statistically significant. We identified 1,151 publications that discussed evidence-practice gaps in nine topic areas. There were 169 intervention studies that were designed to improve adherence to well-established clinical guidelines, averaging 1.9 studies per year per topic area. Twenty-eight publications (34%; 95% CI: 24% - 45%) reported interventions intended for clinicians or health systems that met Effective Practice and Organization of Care (EPOC) criteria for adequate design. The median consent rate of physicians asked to participate in these well-designed studies was 60% (95% CI, 25% to 69%). We evaluated research publications for nine evidence-practice gaps, and identified small numbers of well-designed intervention trials and low rates of physician participation in these trials.

Realization of a universal patient identifier for electronic medical records through biometric technology.

Science.gov (United States)

Leonard, D C; Pons, Alexander P; Asfour, Shihab S

2009-07-01

The technology exists for the migration of healthcare data from its archaic paper-based system to an electronic one, and, once in digital form, to be transported anywhere in the world in a matter of seconds. The advent of universally accessible healthcare data has benefited all participants, but one of the outstanding problems that must be addressed is how the creation of a standardized nationwide electronic healthcare record system in the United States would uniquely identify and match a composite of an individual's recorded healthcare information to an identified individual patients out of approximately 300 million people to a 1:1 match. To date, a few solutions to this problem have been proposed that are limited in their effectiveness. We propose the use of biometric technology within our fingerprint, iris, retina scan, and DNA (FIRD) framework, which is a multiphase system whose primary phase is a multilayer consisting of these four types of biometric identifiers: 1) fingerprint; 2) iris; 3) retina scan; and 4) DNA. In addition, it also consists of additional phases of integration, consolidation, and data discrepancy functions to solve the unique association of a patient to their medical data distinctively. This would allow a patient to have real-time access to all of their recorded healthcare information electronically whenever it is necessary, securely with minimal effort, greater effectiveness, and ease.

The emergent role of digital technologies in the Circular Economy: A review

DEFF Research Database (Denmark)

Pagoropoulos, Aris; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2017-01-01

Digital technologies have enabled the formulation of multiple Product Service-Systems (PSS) with considerable economic, environmental and societal benefits. One of the most promising paradigms, which is inspired by business models and value propositions that have already been described in the PSS....... The study concludes by identifying research gaps, reflecting on the application of digital technologies in the field of PSS and proposing suggestions for future research....... literature, is the concept of Circular Economy. Circular Economy is characterized as an economy that is restorative and regenerative by design and is attracting significant attention from researchers and policy makers alike. In light of the recent proliferation of digital technologies such as Big Data...... and the Internet of Things, this article attempts to identify how can digital technologies support the transition to Circular Economy. This article conducted a systematic review of the literature based on a review protocol, in an effort to evaluate the application of key digital technologies in Circular Economy...

Active epilepsy prevalence, the treatment gap, and treatment gap risk profile in eastern China: A population-based study.

Science.gov (United States)

Ding, Xiaoyan; Zheng, Yang; Guo, Yi; Shen, Chunhong; Wang, Shan; Chen, Feng; Yan, Shengqiang; Ding, Meiping

2018-01-01

We measured the prevalence of active epilepsy and investigated the treatment gap and treatment gap risk profile in eastern China. This was a cross-sectional population-based survey conducted in Zhejiang, China, from October 2013 to March 2014. A total 54,976 people were selected using multi-stage cluster sampling. A two-stage questionnaire-based process was used to identify patients with active epilepsy and to record their demographic, socioeconomic, and epilepsy-related features. Logistic regression analysis was used to analyze risk factors of the treatment gap in eastern China, as adjusted for age and sex. We interviewed 50,035 people; 118 had active epilepsy (2.4‰), among which the treatment gap was 58.5%. In multivariate analysis, failure to receive appropriate antiepileptic treatment was associated with higher seizure frequency of 12-23 times per year (adjusted odds ratio=6.874; 95% confidence interval [CI]=2.372-19.918), >24 times per year (adjusted odds ratio=19.623; 95% CI=4.999-77.024), and a lack of health insurance (adjusted odds ratio=7.284; 95% CI=1.321-40.154). Eastern China has relatively lower prevalence of active epilepsy and smaller treatment gap. Interventions aimed at reducing seizure frequency, improving the health insurance system should be investigated as potential targets to further bridge the treatment gap. Copyright © 2017 Elsevier Inc. All rights reserved.

Biosafety initiatives in BMENA region: identification of gaps and advances

Directory of Open Access Journals (Sweden)

Erum eKhan

2016-03-01

Full Text Available AbstractIntroduction: The objectives of this study were to identify and assess the impact of capacity-building biosafety initiatives and programs that have taken place in the broader Middle East and north Africa (BMENA region between 2001-13, to highlight gaps that require further development, and to suggest sustainable ways to build cooperative regional biosafety opportunities. Methods: A cross sectional study was conducted with two aspects 1 thorough desktop review of literature for all biosafety / biosecurity related activities in the study countries such as seminars, conferences, workshops, policy documents, technology transfer, sustained scientific endeavours between countries etc.; and 2 an online survey of scientists in countries in the region to get first-hand information about biosafety and biosecurity initiatives and gaps in their country. Results: A total of 1832 initiatives of biosafety / biosecurity were recorded from 97 web-links,70.68% (n=1295 initiatives were focused on raising general awareness among the scientific community about biosafety/biosecurity/biocontainment. The most frequent areas of interest were biorisk management in biomedical and biotechnology laboratories 13% (n=239, followed by Living Modified Organisms (LMO’s 9.17% (n=168. Hands-on training accounted for 2.67% (n=49 of initiatives. On line survey results confirmed desktop review findings, however the response rate was 11%.

Biosafety Initiatives in BMENA Region: Identification of Gaps and Advances.

Science.gov (United States)

Khan, Erum; Ahmed, Nayla; Temsamani, Khalid R; El-Gendy, Atef; Cohen, Murray; Hasan, Ariba; Gastfriend, Hilliard; Cole, Jennifer

2016-01-01

The objectives of this study were to identify and assess the impact of capacity-building biosafety initiatives and programs that have taken place in the broader Middle East and North Africa (BMENA) region between 2001 and 2013, to highlight gaps that require further development, and to suggest sustainable ways to build cooperative regional biosafety opportunities. A cross-sectional study was conducted with two aspects (1) thorough desktop review of literature for all biosafety/biosecurity-related activities in the study countries, such as seminars, conferences, workshops, policy documents, technology transfer, sustained scientific endeavors between countries, etc. and (2) an online survey of scientists in countries in the region to get first-hand information about biosafety and biosecurity initiatives and gaps in their country. A total of 1832 initiatives of biosafety/biosecurity were recorded from 97 web links; 70.68% (n = 1295) initiatives were focused on raising general awareness among the scientific community about biosafety/biosecurity/biocontainment. The most frequent areas of interest were biorisk management in biomedical and biotechnology laboratories 13% (n = 239), followed by living modified organisms (LMOs) 9.17% (n = 168). Hands-on training accounted for 2.67% (n = 49) of initiatives. Online survey results confirmed desktop review findings; however, the response rate was 11%.

Effect of Climate and Management Factors on Potential and Gap of Wheat Yield in Iran with Using WOFOST Model

Directory of Open Access Journals (Sweden)

A Koocheki

2017-10-01

Full Text Available Introduction Human diets strongly rely on wheat (Triticum aestivum L.. Its production has increased dramatically during the past 50 years, partly due to area extension and new varieties but mainly as a consequence of intensified land management and introduction of new technologies. For the future, a continuous strong increase in the demand for agricultural products is expected. It is highly unlikely that this increasing demand will be satisfied by area expansion because productive land is scarce and also increasingly demanded by non-agricultural uses. The role of agricultural intensification as key to increasing actual crop yields and food supply has been discussed in several studies. However, in many regions, increases in grain yields have been declining Inefficient management of agricultural land may cause deviations of actual from potential crop yields: the yield gap. At the global scale little information is available on the spatial distribution of agricultural yield gaps and the potential for agricultural intensification. Actual yield is mostly lower than potential yield due to inefficient management and technological that difference between these yields is considered as yield gap. Understanding of relative share of every management factors in yield gap could be as one of the important keys to reduce gap and close actual yield to potential yield. Materials and Methods In order to evaluate the amount of wheat yield gap and also relative share of management and technological variables in yield gap, frontier production function was used which is a multi-variable regression. The frontier production function to be estimated is a Cobb-Douglas function as proposed by Coelli et al. (2005. Cobb-Douglas functions are extensively used in agricultural production studies to explain returns to scale. We propose a methodology to explain the spatial variation of the potential for intensification and identifying the nature of the constraints for further

Long-Term Stewardship Program Science and Technology Requirements

Energy Technology Data Exchange (ETDEWEB)

Joan McDonald

2002-09-01

Many of the United States’ hazardous and radioactively contaminated waste sites will not be sufficiently remediated to allow unrestricted land use because funding and technology limitations preclude cleanup to pristine conditions. This means that after cleanup is completed, the Department of Energy will have long-term stewardship responsibilities to monitor and safeguard more than 100 sites that still contain residual contamination. Long-term stewardship encompasses all physical and institutional controls, institutions, information, and other mechanisms required to protect human health and the environment from the hazards remaining. The Department of Energy Long-Term Stewardship National Program is in the early stages of development, so considerable planning is still required to identify all the specific roles and responsibilities, policies, and activities needed over the next few years to support the program’s mission. The Idaho National Engineering and Environmental Laboratory was tasked with leading the development of Science and Technology within the Long-Term Stewardship National Program. As part of that role, a task was undertaken to identify the existing science and technology related requirements, identify gaps and conflicts that exist, and make recommendations to the Department of Energy for future requirements related to science and technology requirements for long-term stewardship. This work is summarized in this document.

KNOWLEDGE GAPS IN ORAL AND MAXILLOFACIAL SURGERY

DEFF Research Database (Denmark)

Österberg, Marie; Holmlund, Anders; Sunzel, Bo

2017-01-01

OBJECTIVES: The aim of this study was to evaluate available knowledge and identify knowledge gaps within the field of oral and maxillofacial surgery, by systematically collecting and evaluating systematic reviews. Twelve specific domains were selected: surgical removal of teeth, antibiotic....... However, in all domains, the search revealed a large number of knowledge gaps. Also of concern was the lack of data regarding health economics and ethics. CONCLUSIONS: In conclusion, there is a need for well-conducted clinical research in the fields of oral and maxillofacial surgery........ RESULTS: In all, 1,778 abstracts were identified, of which 200 met the inclusion criteria. Forty-five systematic reviews were assessed as of high to moderate quality. The results disclosed some existing evidence in a few domains, such as surgical removal of teeth and implant survival after sinus lifts...

Digital Architecture – Results From a Gap Analysis

Energy Technology Data Exchange (ETDEWEB)

Oxstrand, Johanna Helene [Idaho National Lab. (INL), Idaho Falls, ID (United States); Thomas, Kenneth David [Idaho National Lab. (INL), Idaho Falls, ID (United States); Fitzgerald, Kirk [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-09-01

The digital architecture is defined as a collection of IT capabilities needed to support and integrate a wide-spectrum of real-time digital capabilities for nuclear power plant performance improvements. The digital architecture can be thought of as an integration of the separate I&C and information systems already in place in NPPs, brought together for the purpose of creating new levels of automation in NPP work activities. In some cases, it might be an extension of the current communication systems, to provide digital communications where they are currently analog only. This collection of IT capabilities must in turn be based on a set of user requirements that must be supported for the interconnected technologies to operate in an integrated manner. These requirements, simply put, are a statement of what sorts of digital work functions will be exercised in a fully-implemented seamless digital environment and how much they will be used. The goal of the digital architecture research is to develop a methodology for mapping nuclear power plant operational and support activities into the digital architecture, which includes the development of a consensus model for advanced information and control architecture. The consensus model should be developed at a level of detail that is useful to the industry. In other words, not so detailed that it specifies specific protocols and not so vague that it is only provides a high level description of technology. The next step towards the model development is to determine the current state of digital architecture at typical NPPs. To investigate the current state, the researchers conducted a gap analysis to determine to what extent the NPPs can support the future digital technology environment with their existing I&C and IT structure, and where gaps exist with respect to the full deployment of technology over time. The methodology, result, and conclusions from the gap analysis are described in this report.

Identifying influential factors on integrated marketing planning using information technology

Directory of Open Access Journals (Sweden)

Karim Hamdi

2014-07-01

Full Text Available This paper presents an empirical investigation to identify important factors influencing integrated marketing planning using information technology. The proposed study designs a questionnaire for measuring integrated marketing planning, which consists of three categories of structural factors, behavioral factors and background factors. There are 40 questions associated with the proposed study in Likert scale. Cronbach alphas have been calculated for structural factors, behavioral factors and background factors as 0.89, 0.86 and 0.83, respectively. Using some statistical test, the study has confirmed the effects of three factors on integrated marketing. In addition, the implementation of Freedman test has revealed that structural factors were the most important factor followed by background factors and behavioral factors.

Tools for Communication: Novel infrastructure to address patient-perceived gaps in oncology care
.

Science.gov (United States)

McMullen, Suzanne; Szabo, Shelagh; Halbert, Ronald J; Lai, Catherine; Parikh, Aparna; Bunce, Mikele; Khoury, Raya; Small, Art; Masaquel, Anthony

2017-04-01

Healthcare providers (HCPs) and patient communication are integral to high-quality oncology care. The patient and HCP perspectives are needed to identify gaps in care and develop communication tools.
. This study aimed to understand patient- and HCP-perceived elements of and gaps in high-quality care to develop novel communication tools to improve care. 
. Qualitative interviews were conducted among 16 patients with cancer and 10 HCPs in the United States. Trained interviewers elicited patients' and HCPs' concerns, views, and perceived needs for communication tools. A thematic analysis was used to identify four quality of care domains, depicted in a conceptual model, and two draft communication tools were developed to address identified gaps.
. No patients reported previously using a communication tool, and gaps in communication regarding treatment aims and education were evident. Two tools were developed to assess patients' life and treatment goals and the importance of ongoing education.

Managing Low Back Pain in the Primary Care Setting: The Know-Do Gap

Directory of Open Access Journals (Sweden)

N Ann Scott

2010-01-01

Full Text Available OBJECTIVE: To ascertain knowledge gaps in the diagnosis and treatment of acute and chronic low back pain (LBP in the primary care setting to prepare a scoping survey for identifying knowledge gaps in LBP management among Alberta’s primary care practitioners, and to identify potential barriers to implementing a multidisciplinary LBP guideline.

Examining the Gender Gap in Introductory Physics

Science.gov (United States)

Kost, Lauren; Pollock, Steven; Finkelstein, Noah

2009-05-01

Our previous research[1] showed that despite the use of interactive engagement techniques in the introductory physics course, the gap in performance between males and females on a mechanics conceptual learning survey persisted from pre- to post-test, at our institution. Such findings were counter to previously published work[2]. Follow-up studies[3] identified correlations between student performance on the conceptual learning survey and students' prior physics and math knowledge and their incoming attitudes and beliefs about physics and learning physics. The results indicate that the gender gap at our institution is predominantly associated with differences in males' and females' previous physics and math knowledge, and attitudes and beliefs. Our current work extends these results in two ways: 1) we look at the gender gap in the second semester of the introductory sequence and find results similar to those in the first semester course and 2) we identify ways in which males and females differentially experience several aspects of the introductory course. [1] Pollock, et al, Phys Rev: ST: PER 3, 010107. [2] Lorenzo, et al, Am J Phys 74, 118. [3] Kost, et al, PERC Proceedings 2008.

Exploring cross-national differences in gender gaps in education

NARCIS (Netherlands)

Langen, A.M.L. van; Bosker, R.J.; Dekkers, H.P.J.M.

2006-01-01

Although the participation rates of females in science, technology, engineering, and mathematics (or STEM) education is poor in most Western countries, considerable differences across countries exist as well. This may be due to differences in the so-called gender achievement gaps, that is, delays of

Soil moisture in sessile oak forest gaps

Science.gov (United States)

Zagyvainé Kiss, Katalin Anita; Vastag, Viktor; Gribovszki, Zoltán; Kalicz, Péter

2015-04-01

By social demands are being promoted the aspects of the natural forest management. In forestry the concept of continuous forest has been an accepted principle also in Hungary since the last decades. The first step from even-aged stand to continuous forest can be the forest regeneration based on gap cutting, so small openings are formed in a forest due to forestry interventions. This new stand structure modifies the hydrological conditions for the regrowth. Without canopy and due to the decreasing amounts of forest litter the interception is less significant so higher amount of precipitation reaching the soil. This research focuses on soil moisture patterns caused by gaps. The spatio-temporal variability of soil water content is measured in gaps and in surrounding sessile oak (Quercus petraea) forest stand. Soil moisture was determined with manual soil moisture meter which use Time-Domain Reflectometry (TDR) technology. The three different sizes gaps (G1: 10m, G2: 20m, G3: 30m) was opened next to Sopron on the Dalos Hill in Hungary. First, it was determined that there is difference in soil moisture between forest stand and gaps. Second, it was defined that how the gap size influences the soil moisture content. To explore the short term variability of soil moisture, two 24-hour (in growing season) and a 48-hour (in dormant season) field campaign were also performed in case of the medium-sized G2 gap along two/four transects. Subdaily changes of soil moisture were performed. The measured soil moisture pattern was compared with the radiation pattern. It was found that the non-illuminated areas were wetter and in the dormant season the subdaily changes cease. According to our measurements, in the gap there is more available water than under the forest stand due to the less evaporation and interception loss. Acknowledgements: The research was supported by TÁMOP-4.2.2.A-11/1/KONV-2012-0004 and AGRARKLIMA.2 VKSZ_12-1-2013-0034.

Unpacking policy processes for addressing systemic problems in technological innovation systems : The case of offshore wind in Germany

NARCIS (Netherlands)

Reichardt, Kristin; Rogge, Karoline S.; Negro, Simona O.

2017-01-01

While empirical studies on technological innovation systems (TIS) usually focus on policy instruments and their suitability for curing identified weaknesses of such emerging systems, the underlying policy processes and their effects have been largely disregarded. We address this gap by exploring the

An Analysis of Asia-Pacific Educational Technology Research Published Internationally in 2000-2013

Science.gov (United States)

Jung, Insung; Yoo, Mina

2014-01-01

The past fourteen years have seen a significant rise in the percentage of Asia-Pacific papers on educational technology (ET) published internationally: from 13.7% in 2000 to 38.4% in 2013. This study seeks to identify the overall trends and gaps in this research. Of the 4,332 articles published in five selected international journals between 2000…

The identification of conduction gaps after pulmonary vein isolation using a new electroanatomic mapping system.

Science.gov (United States)

Masuda, Masaharu; Fujita, Masashi; Iida, Osamu; Okamoto, Shin; Ishihara, Takayuki; Nanto, Kiyonori; Kanda, Takashi; Tsujimura, Takuya; Matsuda, Yasuhiro; Okuno, Shota; Ohashi, Takuya; Tsuji, Aki; Mano, Toshiaki

2017-11-01

The reconnection of left atrial-pulmonary vein (LA-PV) conduction after the initial procedure of pulmonary vein (PV) isolation is not rare, and is one of the main cause of atrial fibrillation (AF) recurrence after PV isolation. We investigated feasibility of a new ultrahigh-resolution mapping system using a 64-pole small basket catheter for the identification of LA-PV conduction gaps. This prospective study included 31 consecutive patients (20 with persistent AF) undergoing a second ablation after a PV isolation procedure with LA-PV reconnected conduction at any of the 4 PVs. An LA-PV map was created using the mapping system, and ablation was performed at the estimated gap location. The propagation map identified 54 gaps from 39 ipsilateral PV pairs, requiring manual electrogram reannotation for 23 gaps (43%). Gaps at the anterior and carinal regions of left and right ipsilateral PVs required manual electrogram reannotation more frequently than the other regions. The voltage map could identify the gap only in 19 instances (35%). Electrophysiological properties of the gaps (multiple gaps in the same ipsilateral PVs, conduction time, velocity, width, and length) did not differ between those needing and not needing manual electrogram reannotation. During the gap ablation, either the activation sequence alteration or elimination of PV potentials was observed using a circular catheter placed in the PV, suggesting that all the identified gaps were correct. This new electroanatomic mapping system visualized all the LA-PV gaps in patients undergoing a second AF ablation. Copyright © 2017 Heart Rhythm Society. Published by Elsevier Inc. All rights reserved.

Human Performance Optimization Metrics: Consensus Findings, Gaps, and Recommendations for Future Research.

Science.gov (United States)

Nindl, Bradley C; Jaffin, Dianna P; Dretsch, Michael N; Cheuvront, Samuel N; Wesensten, Nancy J; Kent, Michael L; Grunberg, Neil E; Pierce, Joseph R; Barry, Erin S; Scott, Jonathan M; Young, Andrew J; OʼConnor, Francis G; Deuster, Patricia A

2015-11-01

Human performance optimization (HPO) is defined as "the process of applying knowledge, skills and emerging technologies to improve and preserve the capabilities of military members, and organizations to execute essential tasks." The lack of consensus for operationally relevant and standardized metrics that meet joint military requirements has been identified as the single most important gap for research and application of HPO. In 2013, the Consortium for Health and Military Performance hosted a meeting to develop a toolkit of standardized HPO metrics for use in military and civilian research, and potentially for field applications by commanders, units, and organizations. Performance was considered from a holistic perspective as being influenced by various behaviors and barriers. To accomplish the goal of developing a standardized toolkit, key metrics were identified and evaluated across a spectrum of domains that contribute to HPO: physical performance, nutritional status, psychological status, cognitive performance, environmental challenges, sleep, and pain. These domains were chosen based on relevant data with regard to performance enhancers and degraders. The specific objectives at this meeting were to (a) identify and evaluate current metrics for assessing human performance within selected domains; (b) prioritize metrics within each domain to establish a human performance assessment toolkit; and (c) identify scientific gaps and the needed research to more effectively assess human performance across domains. This article provides of a summary of 150 total HPO metrics across multiple domains that can be used as a starting point-the beginning of an HPO toolkit: physical fitness (29 metrics), nutrition (24 metrics), psychological status (36 metrics), cognitive performance (35 metrics), environment (12 metrics), sleep (9 metrics), and pain (5 metrics). These metrics can be particularly valuable as the military emphasizes a renewed interest in Human Dimension efforts

Transport and acceleration of the high-current ion beam in magneto-isolated gap

International Nuclear Information System (INIS)

Karas', V.I.; Kornilov, E.A.; Manuilenko, O.V.; Fedorovskaya, O.V.; Tarakanov, V.P.

2015-01-01

The possibility of transportation and acceleration of the high-current ion beam in the magneto-isolated gap has been demonstrated. Found the parameters of the system and beams (the magnetic field produced by the coils with opposing currents, the size of the system, and the parameters of the beams), under which the uniform acceleration of the high-current ion beam all along the gap length is realized. It is shown that the quality of the ion beam, during transport and acceleration, at the exit of the gap is acceptable for many technological applications.

Engineers and the Web: An analysis of real life gaps in information usage

NARCIS (Netherlands)

Kraaijenbrink, Jeroen

2007-01-01

Engineers face a wide range of gaps when trying to identify, acquire, and utilize information from the Web. To be able to avoid creating such gaps, it is essential to understand them in detail. This paper reports the results of a study of the real life gaps in information usage processes of 17

An undergraduate course to bridge the gap between textbooks and scientific research.

Science.gov (United States)

Wiegant, Fred; Scager, Karin; Boonstra, Johannes

2011-01-01

This article reports on a one-semester Advanced Cell Biology course that endeavors to bridge the gap between gaining basic textbook knowledge about cell biology and learning to think and work as a researcher. The key elements of this course are 1) learning to work with primary articles in order to get acquainted with the field of choice, to learn scientific reasoning, and to identify gaps in our current knowledge that represent opportunities for further research; 2) formulating a research project with fellow students; 3) gaining thorough knowledge of relevant methodology and technologies used within the field of cell biology; 4) developing cooperation and leadership skills; and 5) presenting and defending research projects before a jury of experts. The course activities were student centered and focused on designing a genuine research program. Our 5-yr experience with this course demonstrates that 1) undergraduate students are capable of delivering high-quality research designs that meet professional standards, and 2) the authenticity of the learning environment in this course strongly engages students to become self-directed and critical thinkers. We hope to provide colleagues with an example of a course that encourages and stimulates students to develop essential research thinking skills.

The Use of Gap Analysis to Increase Student Completion Rates at Travelor Adult School

Science.gov (United States)

Gil, Blanca Estela

2013-01-01

This project applied the gap analysis problem-solving framework (Clark & Estes, 2008) in order to help develop strategies to increase completion rates at Travelor Adult School. The purpose of the study was to identify whether the knowledge, motivation and organization barriers were contributing to the identified gap. A mixed method approached…

Technology Strategy for 'Environmental Technology for the Future'; Technology Target Areas; TTA1 - environmental technology for the future

Energy Technology Data Exchange (ETDEWEB)

2007-07-01

The OG21 Technology Target Area 1 (TTA 1) group has produced a strategy for 'Environmental Technology for the Future'. A key aim of this work is to ensure that the operators on the Norwegian Continental Shelf (NCS) remain in a leading position with respect to environmental performance, while contributing to optimised resource recovery and value creation. This strategy focuses on environmental technology, which includes hardware, methods, software and knowledge. The TTA 1 group has agreed on a common vision: 'Norwegian oil and gas activities shall be leading in environmental performance, and Norway shall have the world leading knowledge and technology cluster within environmental technologies to support the zero harmful impact goals of the oil and gas industry.' Priorities have been made with emphasis on gaps that are considered most important to close and that will benefit from public research and development funding either for initialisation (primarily via the Petromaks and Climit programs) or acceleration (via Petromaks / Climit and particularly Demo 2000 where demonstration or piloting is required). The priorities aim to avoid technology gaps that are expected to be closed adequately through existing projects / programs or which are covered in other TTA strategies. The priority areas as identified are: Environmental impact and risk identification / quantification for new areas: Make quality assured environmental baseline data available on the web. Develop competence necessary to quantify and monitor the risks and risk reductions to the marine environment in new area ecosystems; Carbon capture and storage: Quantify environmental risks and waste management issues associated with bi-products from carbon capture processes and storage solutions. Develop and demonstrate effective carbon storage risk management, monitoring and mitigation technologies. Develop more cost and energy efficient power-from-shore solutions to reduce / eliminate CO{sub 2

Using technology to deliver mental health services to children and youth: a scoping review.

Science.gov (United States)

Boydell, Katherine M; Hodgins, Michael; Pignatiello, Antonio; Teshima, John; Edwards, Helen; Willis, David

2014-05-01

To conduct a scoping review on the use of technology to deliver mental health services to children and youth in order to identify the breadth of peer-reviewed literature, summarize findings and identify gaps. A literature database search identified 126 original studies meeting criteria for review. Descriptive numerical summary and thematic analyses were conducted. Two reviewers independently extracted data. Studies were characterized by diverse technologies including videoconferencing, telephone and mobile phone applications and Internet-based applications such as email, web sites and CD-ROMs. The use of technologies plays a major role in the delivery of mental health services and supports to children and youth in providing prevention, assessment, diagnosis, counseling and treatment programs. Strategies are growing exponentially on a global basis, thus it is critical to study the impact of these technologies on child and youth mental health service delivery. An in-depth review and synthesis of the quality of findings of studies on effectiveness of the use of technologies in service delivery are also warranted. A full systematic review would provide that opportunity.

Development of Multidimensional Gap Conductance model using Virtual Link Gap Element

Energy Technology Data Exchange (ETDEWEB)

Kim, Hyo Chan; Yang, Yong Sik; Kim, Dae Ho; Bang, Je Geon; Kim, Sun Ki; Koo, Yang Hyun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-10-15

The gap conductance that determines temperature gradient between pellet and cladding can be quite sensitive to gap thickness. For instance, once the gap size increases up to several micrometers in certain region, difference of pellet surface temperatures increases up to 100 Kelvin. Therefore, iterative thermo-mechanical coupled analysis is required to solve temperature distribution throughout pellet and cladding. Recently, multidimensional fuel performance codes have been being developed in the advanced countries to evaluate thermal behavior of fuel for off normal conditions and DBA(design based accident) conditions using the Finite Element Method (FEM). FRAPCON-FRAPTRAN code system, which is well known as the verified and reliable code, incorporates 1D thermal module and multidimensional mechanical module. In this code, multidimensional gap conductance model is not applied. ALCYONE developed by CEA introduces equivalent heat convection coefficient that represents multidimensional gap conductance as a function of gap thickness. BISON, which is multidimensional fuel performance code developed by INL, owns multidimensional gap conductance model using projected thermal contact. In general, thermal contact algorithm is nonlinear calculation which is expensive approach numerically. The gap conductance model for multi-dimension is difficult issue in terms of convergence and nonlinearity because gap conductance is function of gap thickness which depends on mechanical analysis at each iteration step. In this paper, virtual link gap (VLG) element has been proposed to resolve convergence issue and nonlinear characteristic of multidimensional gap conductance. In terms of calculation accuracy and convergence efficiency, the proposed VLG model was evaluated. LWR fuel performance codes should incorporate thermo-mechanical loop to solve gap conductance problem, iteratively. However, gap conductance in multidimensional model is difficult issue owing to its nonlinearity and

Identifying Predictors of Taxane-Induced Peripheral Neuropathy Using Mass Spectrometry-Based Proteomics Technology.

Directory of Open Access Journals (Sweden)

Emily I Chen

Full Text Available Major advances in early detection and therapy have significantly increased the survival of breast cancer patients. Unfortunately, most cancer therapies are known to carry a substantial risk of adverse long-term treatment-related effects. Little is known about patient susceptibility to severe side effects after chemotherapy. Chemotherapy-induced peripheral neuropathy (CIPN is a common side effect of taxanes. Recent advances in genome-wide genotyping and sequencing technologies have supported the discoveries of a number of pharmacogenetic markers that predict response to chemotherapy. However, effectively implementing these pharmacogenetic markers in the clinic remains a major challenge. On the other hand, recent advances in proteomic technologies incorporating mass spectrometry (MS for biomarker discovery show great promise to provide clinically relevant protein biomarkers. In this study, we evaluated the association between protein content in serum exosomes and severity of CIPN. Women with early stage breast cancer receiving adjuvant taxane chemotherapy were assessed with the FACT-Ntx score and serum was collected before and after the taxane treatment. Based on the change in FACT-Ntx score from baseline to 12 month follow-up, we separated patients into two groups: those who had no change (Group 1, N = 9 and those who had a ≥20% worsening (Group 1, N = 8. MS-based proteomics technology was used to identify proteins present in serum exosomes to determine potential biomarkers. Mann-Whitney-Wilcoxon analysis was applied and maximum FDR was controlled at 20%. From the serum exosomes derived from this cohort, we identified over 700 proteins known to be in different subcellular locations and have different functions. Statistical analysis revealed a 12-protein signature that resulted in a distinct separation between baseline serum samples of both groups (q<0.2 suggesting that the baseline samples can predict subsequent neurotoxicity. These toxicity

Magnet system optimization for segmented adaptive-gap in-vacuum undulator

Energy Technology Data Exchange (ETDEWEB)

Kitegi, C., E-mail: ckitegi@bnl.gov; Chubar, O.; Eng, C. [Energy Sciences Directorates, Brookhaven National Laboratory, Upton NY1 1973 (United States)

2016-07-27

Segmented Adaptive Gap in-vacuum Undulator (SAGU), in which different segments have different gaps and periods, promises a considerable spectral performance gain over a conventional undulator with uniform gap and period. According to calculations, this gain can be comparable to the gain achievable with a superior undulator technology (e.g. a room-temperature in-vacuum hybrid SAGU would perform as a cryo-cooled hybrid in-vacuum undulator with uniform gap and period). However, for reaching the high spectral performance, SAGU magnetic design has to include compensation of kicks experienced by the electron beam at segment junctions because of different deflection parameter values in the segments. We show that such compensation to large extent can be accomplished by using a passive correction, however, simple correction coils are nevertheless required as well to reach perfect compensation over a whole SAGU tuning range. Magnetic optimizations performed with Radia code, and the resulting undulator radiation spectra calculated using SRW code, demonstrating a possibility of nearly perfect correction, are presented.

[Good agricultural practice (GAP) of Chinese materia medica (CMM) for ten years: achievements, problems and proposals].

Science.gov (United States)

Guo, Lan-Ping; Zhang, Yan; Zhu, Shou-Dong; Wang, Gui-Hua; Wang, Xiu; Zhang, Xiao-Bo; Chen, Mei-Lan; He, Ya-Li; Han, Bang-Xing; Chen, Nai-Fu; Huang, Lu-Qi

2014-04-01

support for the CMM production; (5) To deepen the understanding of GAP, to vigorously promote ecological planting and precision agriculture, in order to overcome the continuous cropping obstacle. The authors think that despite the fact that we are still facing with a huge array of management and technological problems, the GAP in the CMM growing has already enjoyed widespread support and showed great potential. In the future, with people's deeper understanding of GAP and the great progress of the science and technology, the GAP will constantly be fused with the theory, methodology and technology in the modern agriculture like precision agriculture, eco-agriculture and etc.

The inverse F-BAR domain protein srGAP2 acts through srGAP3 to modulate neuronal differentiation and neurite outgrowth of mouse neuroblastoma cells.

Directory of Open Access Journals (Sweden)

Yue Ma

Full Text Available The inverse F-BAR (IF-BAR domain proteins srGAP1, srGAP2 and srGAP3 are implicated in neuronal development and may be linked to mental retardation, schizophrenia and seizure. A partially overlapping expression pattern and highly similar protein structures indicate a functional redundancy of srGAPs in neuronal development. Our previous study suggests that srGAP3 negatively regulates neuronal differentiation in a Rac1-dependent manner in mouse Neuro2a cells. Here we show that exogenously expressed srGAP1 and srGAP2 are sufficient to inhibit valporic acid (VPA-induced neurite initiation and growth in the mouse Neuro2a cells. While ectopic- or over-expression of RhoGAP-defective mutants, srGAP1(R542A and srGAP2(R527A exert a visible inhibitory effect on neuronal differentiation. Unexpectedly, knockdown of endogenous srGAP2 fails to facilitate the neuronal differentiation induced by VPA, but promotes neurite outgrowth of differentiated cells. All three IF-BAR domains from srGAP1-3 can induce filopodia formation in Neuro2a, but the isolated IF-BAR domain from srGAP2, not from srGAP1 and srGAP3, can promote VPA-induced neurite initiation and neuronal differentiation. We identify biochemical and functional interactions of the three srGAPs family members. We propose that srGAP3-Rac1 signaling may be required for the effect of srGAP1 and srGAP2 on attenuating neuronal differentiation. Furthermore, inhibition of Slit-Robo interaction can phenocopy a loss-of-function of srGAP3, indicating that srGAP3 may be dedicated to the Slit-Robo pathway. Our results demonstrate the interplay between srGAP1, srGAP2 and srGAP3 regulates neuronal differentiation and neurite outgrowth. These findings may provide us new insights into the possible roles of srGAPs in neuronal development and a potential mechanism for neurodevelopmental diseases.

Critical Gap distance in Laser Butt-welding

DEFF Research Database (Denmark)

Bagger, Claus; Olsen, Flemming Ove

of "reference" welds are made and compared to sheets with the edges shear cut. The gap distance is precisely controlled by inserting spacers between the sheets. In the tests the gap is set at 0.00, 0.02, 0.05, 0.08 and 0.10 mm. Mild steel (St 1203) with thickness? of 0.75 and 1.25 mm with and without zinc......When butt-welding metal sheets with high power lasers the gap distance between the sheets determine the final quality of the seam. In a number of systematic laboratory experiments the critical gap distance that results in sound beads is identified. By grinding the edges of the sheets, a number...... coating were analysed. A total of 120 welds are made at different welding speeds.As quality norm DIN 8563 is used to divide the welds into quality classes. Since this norm only deals with surface defects a number of welds are also x-ray photographed.According to DIN 8563 the welds have classes of either B...

Innovative Competency Gap Analysis; A Malaysian Nuclear Research Institute Case Study

International Nuclear Information System (INIS)

Muhd Husamuddin A Khalil; Zakaria Taib; Zuraida Zainudin; Munira Shaikh Nasir; Abul Adli Anuar

2015-01-01

Human resource development has become an essential component to the development process of Research and Development institute like Malaysian Nuclear Agency as it relies heavily on a specialized and highly trained work force for its technical capability and sustainability. In this paper, it is urged that human resource development be supported by appropriate survey tools to achieve its one of the most important objective which is to prepare training platforms that follow-through from the systematic competency gap analysis approach. The purpose of this study was to find the competency needs and investigate the competency gaps in Malaysia Nuclear Agency using modified Systematic Assessment of Regulatory Competence Needs for Regulatory Bodies of Nuclear Facilities (SARCoN) tools by International Atomic Energy Agency (IAEA) based on basic, applied and specialized Science and Technology area of expertise. To achieve this purpose, the secretariat identified the appropriate competency statements based on each Division and investigation has been done on all the researchers to find the competency gaps via survey using SARCoN tools. On this ground, it has been concluded that a lot of competency on specialized subject matters need to be systematically analyzed using innovative analytical method that yield 2 important parameters: i. organizational core competencies; ii. Personnel core competencies. From a before and after comparison, it is concluded that the new strategy is better placed to manage the training and educational programme to preserve the sustainability of subject matter experts of nuclear HRD in this organization and Malaysia as a whole. (author)

Technology of substrates for molecular beam homo epitaxy of wide - gap AII-BVI semiconductors and construction of a simplified setup for this process

International Nuclear Information System (INIS)

Mycielski, A.; Szadkowski, A.; Kaliszek, W.

2000-01-01

The technology of 'epi-ready' substrate plates (for MBE) of the wide gap AII-BVI semiconductor compounds, i. e. - preparation of the ultra pure elements, synthesis of the source material, crystallization by the physical vapour transport technique, cutting of the oriented plates, mechano-chemical polishing and preparation of the 'epi-ready' surface - is described, as well as the construction of a simplified version of the MBE setup for covering the substrate plates with the homoepitaxial layer. The results of the characterization of the substrate crystals and plates are presented. (author)

Identifying the Education Needs of the Business Analyst: An Australian Study

Directory of Open Access Journals (Sweden)

Deborah Richards

2014-06-01

Full Text Available The Business Analyst (BA plays a key role in ensuring that technology is appropriately used to achieve the organisation’s goals. This important mediating role is currently in high (unmet demand in many English-speaking countries and thus more people need to be trained for this role. To determine the educational and/or training needs of a BA we conducted a survey in the Information and Communication Technology industry in Australia. The survey items are based on prior studies of information systems educational requirements and the internationally-developed Skills Framework for the Information Age (SFIA that has been endorsed by the Australian Computer Society. From the literature we identified three types of skills: soft, business and technical. With the increasing importance of GreenIT and the pivotal role that the BA could play in green decision making, we added a fourth type of skill: green. The survey considers 85 skills, their importance, the level of attainment of that skill, skill gaps and types of skills. Results show that all soft skills were considered to be important with the smallest knowledge gaps. Selected business skills and green skills were seen to be important. Technical skills were considered less important, but also where the largest knowledge gaps existed. Further we asked respondents whether each skill should be acquired via an undergraduate or postgraduate degree and/or industry training and experience. We found that the workplace was considered the most appropriate place to acquire and/or develop all skills, except the ability to innovate. While we found that softskills should be taught almost equally at the undergraduate and postgraduate level, business and green skills were more appropriate in a postgraduate degree. In contrast, technical skills were best acquired in an undergraduate program of study.

Amygdala-enriched genes identified by microarray technology are restricted to specific amygdaloid subnuclei

OpenAIRE

Zirlinger, M.; Kreiman, Gabriel; Anderson, D. J.

2001-01-01

Microarray technology represents a potentially powerful method for identifying cell type- and regionally restricted genes expressed in the brain. Here we have combined a microarray analysis of differential gene expression among five selected brain regions, including the amygdala, cerebellum, hippocampus, olfactory bulb, and periaqueductal gray, with in situ hybridization. On average, 0.3% of the 34,000 genes interrogated were highly enriched in each of the five regions...

Advanced manufacturing technology effectiveness: A review of literature and some issues

Science.gov (United States)

Goyal, Sanjeev; Grover, Sandeep

2012-09-01

Advanced manufacturing technology (AMT) provides advantages to manufacturing managers in terms of flexibility, quality, reduced delivery times, and global competitiveness. Although a large number of publications had presented the importance of this technology, only a few had delved into related literature review. Considering the importance of this technology and the recent contributions by various authors, the present paper conducts a more comprehensive review. Literature was reviewed in a way that will help researchers, academicians, and practitioners to take a closer look at the implementation, evaluation, and justification of the AMT. The authors reviewed various papers, proposed a different classification scheme, and identified certain gaps that will provide hints for further research in AMT management.

Gaps and strategies in developing health research capacity: experience from the Nigeria Implementation Science Alliance.

Science.gov (United States)

Ezeanolue, Echezona E; Menson, William Nii Ayitey; Patel, Dina; Aarons, Gregory; Olutola, Ayodotun; Obiefune, Michael; Dakum, Patrick; Okonkwo, Prosper; Gobir, Bola; Akinmurele, Timothy; Nwandu, Anthea; Khamofu, Hadiza; Oyeledun, Bolanle; Aina, Muyiwa; Eyo, Andy; Oleribe, Obinna; Ibanga, Ikoedem; Oko, John; Anyaike, Chukwuma; Idoko, John; Aliyu, Muktar H; Sturke, Rachel

2018-02-12

Despite being disproportionately burdened by preventable diseases than more advanced countries, low- and middle-income countries (LMICs) continue to trail behind other parts of the world in the number, quality and impact of scholarly activities by their health researchers. Our strategy at the Nigerian Implementation Science Alliance (NISA) is to utilise innovative platforms that catalyse collaboration, enhance communication between different stakeholders, and promote the uptake of evidence-based interventions in improving healthcare delivery. This article reports on findings from a structured group exercise conducted at the 2016 NISA Conference to identify (1) gaps in developing research capacity and (2) potential strategies to address these gaps. A 1-hour structured group exercise was conducted with 15 groups of 2-9 individuals (n = 94) to brainstorm gaps for implementation, strategies to address gaps and to rank their top 3 in each category. Qualitative thematic analysis was used. First, duplicate responses were merged and analyses identified emerging themes. Each of the gaps and strategies identified were categorised as falling into the purview of policy-makers, researchers, implementing partners or multiple groups. Participating stakeholders identified 98 gaps and 91 strategies related to increasing research capacity in Nigeria. A total of 45 gaps and an equal number of strategies were ranked; 39 gaps and 43 strategies were then analysed, from which 8 recurring themes emerged for gaps (lack of sufficient funding, poor research focus in education, inadequate mentorship and training, inadequate research infrastructure, lack of collaboration between researchers, research-policy dissonance, lack of motivation for research, lack of leadership buy-in for research) and 7 themes emerged for strategies (increased funding for research, improved research education, improved mentorship and training, improved infrastructure for research, increased collaboration between

NASA Astrophysics Funds Strategic Technology Development

Science.gov (United States)

Seery, Bernard D.; Ganel, Opher; Pham, Bruce

2016-01-01

The COR and PCOS Program Offices (POs) reside at the NASA Goddard Space Flight Center (GSFC), serving as the NASA Astrophysics Division's implementation arm for matters relating to the two programs. One aspect of the PO's activities is managing the COR and PCOS Strategic Astrophysics Technology (SAT) program, helping mature technologies to enable and enhance future astrophysics missions. For example, the SAT program is expected to fund key technology developments needed to close gaps identified by Science and Technology Definition Teams (STDTs) planned to study several large mission concept studies in preparation for the 2020 Decadal Survey.The POs are guided by the National Research Council's "New Worlds, New Horizons in Astronomy and Astrophysics" Decadal Survey report, NASA's Astrophysics Implementation Plan, and the visionary Astrophysics Roadmap, "Enduring Quests, Daring Visions." Strategic goals include dark energy, gravitational waves, and X-ray observatories. Future missions pursuing these goals include, e.g., US participation in ESA's Euclid, Athena, and L3 missions; Inflation probe; and a large UV/Optical/IR (LUVOIR) telescope.To date, 65 COR and 71 PCOS SAT proposals have been received, of which 15 COR and 22 PCOS projects were funded. Notable successes include maturation of a new far-IR detector, later adopted by the SOFIA HAWC instrument; maturation of the H4RG near-IR detector, adopted by WFIRST; development of an antenna-coupled transition-edge superconducting bolometer, a technology deployed by BICEP2/BICEP3/Keck to measure polarization in the CMB signal; advanced UV reflective coatings implemented on the optics of GOLD and ICON, two heliophysics Explorers; and finally, the REXIS instrument on OSIRIS-REx is incorporating CCDs with directly deposited optical blocking filters developed by another SAT-funded project.We discuss our technology development process, with community input and strategic prioritization informing calls for SAT proposals and

Closing the mycetoma knowledge gap.

Science.gov (United States)

van de Sande, Wendy; Fahal, Ahmed; Ahmed, Sarah Abdalla; Serrano, Julian Alberto; Bonifaz, Alexandro; Zijlstra, Ed

2018-04-01

On 28th May 2016, mycetoma was recognized as a neglected tropical disease by the World Health Organization. This was the result of a 4-year journey starting in February 2013 with a meeting of global mycetoma experts. Knowledge gaps were identified and included the incidence, prevalence, and mapping of mycetoma; the mode of transmission; the development of methods for early diagnosis; and better treatment. In this review, we review the road to recognition, the ISHAM working group meeting in Argentina, and we address the progress made in closing the knowledge gaps since 2013. Progress included adding another 9000 patients to the literature, which allowed us to update the prevalence map on mycetoma. Furthermore, based on molecular phylogeny, species names were corrected and four novel mycetoma causative agents were identified. By mapping mycetoma causative agents an association with Acacia trees was found. For early diagnosis, three different isothermal amplification techniques were developed, and novel antigens were discovered. To develop better treatment strategies for mycetoma patients, in vitro susceptibility tests for the coelomycete agents of black grain mycetoma were developed, and the first randomized clinical trial for eumycetoma started early 2017.

Identifying gaps between current and expected ICT competencies of nurses in Serbia.

Science.gov (United States)

Paunic, Sanja; Stojkovic, Ivana

2014-01-01

Introducing of ICT in the health care system in Serbia started 19 years ago and systematic training of nurses and technicians has not been realized yet. The primary objective of this paper is to determine the gap between the sets of ICT competencies of nurses and technicians acquiring education and experience and the necessary skill set required for their daily work. The qualitative research included questioning of the focus group of experts and 400 nurses and technicians employed in secondary and tertiary health institutions in Serbia. Based on the analysis of existing literature we choose the Informatics competencies for nurses at four levels of practice (Staggers, Gassert, Curran, 2001), and for the purposes of this study, we used a list of competencies of the first, and partially of the second and third level. At the start, the group of 12 experts had the task to eliminate some of listed competencies to express the subjective expectations of the ICT competencies of nurses. After that nurses and medical technicians were expected to grade, by Likert scale, their level of knowledge and skills for each of the 39 competencies, respectively. The answers were analyzed using measure of central tendency and distribution of results was done by median. Comparison of perceived competence of the nurses and the desired/expected level by managers shows that there is difference in 25 of the 39 offered statements. Managers expect that nurses are great users of administrative applications for staff scheduling and for maintaining employee records, while nurses declared that these programs they use relatively poorly or not at all. The larger gap is also observed when it comes to computer skill for documenting patient care--experts expect that nurses do it well, and nurses, again, estimate that their documentation skills are relatively poor. The same situation is with use of ICT for patient education. It can be concluded that further training is required in the field of ICT, either

The Data Gap in the EHR for Clinical Research Eligibility Screening.

Science.gov (United States)

Butler, Alex; Wei, Wei; Yuan, Chi; Kang, Tian; Si, Yuqi; Weng, Chunhua

2018-01-01

Much effort has been devoted to leverage EHR data for matching patients into clinical trials. However, EHRs may not contain all important data elements for clinical research eligibility screening. To better design research-friendly EHRs, an important step is to identify data elements frequently used for eligibility screening but not yet available in EHRs. This study fills this knowledge gap. Using the Alzheimer's disease domain as an example, we performed text mining on the eligibility criteria text in Clinicaltrials.gov to identify frequently used eligibility criteria concepts. We compared them to the EHR data elements of a cohort of Alzheimer's Disease patients to assess the data gap by usingthe OMOP Common Data Model to standardize the representations for both criteria concepts and EHR data elements. We identified the most common SNOMED CT concepts used in Alzheimer 's Disease trials, andfound 40% of common eligibility criteria concepts were not even defined in the concept space in the EHR dataset for a cohort of Alzheimer 'sDisease patients, indicating a significant data gap may impede EHR-based eligibility screening. The results of this study can be useful for designing targeted research data collection forms to help fill the data gap in the EHR.

Perceptions and experiences of a gender gap at a Canadian research institute and potential strategies to mitigate this gap: a sequential mixed-methods study.

Science.gov (United States)

Mascarenhas, Alekhya; Moore, Julia E; Tricco, Andrea C; Hamid, Jemila; Daly, Caitlin; Bain, Julie; Jassemi, Sabrina; Kiran, Tara; Baxter, Nancy; Straus, Sharon E

2017-01-01

The gender gap in academia is long-standing. Failure to ensure that our academic faculty reflect our student pool and national population deprives Canada of talent. We explored the gender distribution and perceptions of the gender gap at a Canadian university-affiliated, hospital-based research institute. We completed a sequential mixed-methods study. In phase 1, we used the research institute's registry of scientists (1999-2014) and estimated overall prevalence of a gender gap and the gap with respect to job description (e.g., associate v. full-time) and research discipline. In phase 2, we conducted qualitative interviews to provide context for phase 1 data. Both purposive and snowball sampling were used for recruitment. The institute included 30.1% ( n = 62) women and 69.9% ( n = 144) men, indicating a 39.8% gender gap. Most full-time scientists (60.3%, n = 70) were clinicians; there were 54.2% more male than female clinician scientists. Ninety-five percent of basic scientists were men, indicating a 90.5% gap. Seven key themes emerged from 21 interviews, including perceived impact of the gender gap, factors perceived to influence the gap, recruitment trends, presence of institutional support, mentorship and suggestions to mitigate the gap. Several factors were postulated to contribute to the gender gap, including unconscious bias in hiring. A substantial gender gap exists within this research institute. Participants identified strategies to address this gap, such as establishing transparent search processes, providing opportunities for informal networking and mentorship of female scientists and establishing institutional support for work-life balance.

Optical Manufacturing and Testing Requirements Identified by the NASA Science Instruments, Observatories and Sensor Systems Technology Assessment

Science.gov (United States)

Stahl, H. Philip; Barney, Rich; Bauman, Jill; Feinberg, Lee; Mcleese, Dan; Singh, Upendra

2011-01-01

In August 2010, the NASA Office of Chief Technologist (OCT) commissioned an assessment of 15 different technology areas of importance to the future of NASA. Technology assessment #8 (TA8) was Science Instruments, Observatories and Sensor Systems (SIOSS). SIOSS assess the needs for optical technology ranging from detectors to lasers, x-ray mirrors to microwave antenna, in-situ spectrographs for on-surface planetary sample characterization to large space telescopes. The needs assessment looked across the entirety of NASA and not just the Science Mission Directorate. This paper reviews the optical manufacturing and testing technologies identified by SIOSS which require development in order to enable future NASA high priority missions.

AIR GAP CONTROL SYSTEM FOR HYDROGENERATORS

Directory of Open Access Journals (Sweden)

I. O. Zaitsev

2017-01-01

Full Text Available In this paper, we report of the solving the actual problem of control the air gap in the hydrogenerators. The aim of the study was development of a computerized information-measuring system for measuring the air gap in the hydrogenator, which used two capacitive sensors with parallel coplanar electrodes, and the method of determining the shape of the envelope parameters hydrogenerator rotor poles relative to the center axis of rotation, using the measurement results of the air gap.In practical studies of the sensor circuit it has been shown that its use allows for the informative value of the sensor capacitance conversion function to obtain a high accuracy and resolution measurement with digital linearization of converting function of the sensor with use program utility. To determine the form deviations of the envelope line of the rotor pole from the ideal cylinder, which is one of the main structural defects of the technological errors as results the distortion of the shape of the air gap in the hydrogenator, when the machine was manufacture and assembly. It is proposed to describe the shape of the envelope to use a Fourier transform. Calculation of the coefficients of the Fourier series is performed using the method of least squares as the regression coefficients.Application of this method in processing the measuring data in a computerized information-measuring system the developed with the primary converter with coplanar parallel electrodes allowed attaining the high measurement accuracy and resolution informative in magnitude of the capacity.

Integrating themes, evidence gaps, and research needs identified by workshop on iron screening and supplementation in iron-replete pregnant women and young children.

Science.gov (United States)

Brannon, Patsy M; Stover, Patrick J; Taylor, Christine L

2017-12-01

This report addresses the evidence and the uncertainties, knowledge gaps, and research needs identified by participants at the NIH workshop related to iron screening and routine iron supplementation of largely iron-replete pregnant women and young children (6-24 mo) in developed countries. The workshop presentations and panel discussions focused on current understanding and knowledge gaps related to iron homeostasis, measurement of and evidence for iron status, and emerging concerns about supplementing iron-replete members of these vulnerable populations. Four integrating themes emerged across workshop presentations and discussion and centered on 1 ) physiologic or developmental adaptations of iron homeostasis to pregnancy and early infancy, respectively, and their implications, 2 ) improvement of the assessment of iron status across the full continuum from iron deficiency anemia to iron deficiency to iron replete to iron excess, 3 ) the linkage of iron status with health outcomes beyond hematologic outcomes, and 4 ) the balance of benefit and harm of iron supplementation of iron-replete pregnant women and young children. Research that addresses these themes in the context of the full continuum of iron status is needed to inform approaches to the balancing of benefits and harms of screening and routine supplementation. © 2017 American Society for Nutrition.

Bridging the Gap: Identifying Global Trends in Gender Disparity Among the Radiology Physician Workforce.

Science.gov (United States)

Cater, Sarah Wallace; Yoon, Sora C; Lowell, Dorothy A; Campbell, James C; Sulioti, Gary; Qin, Rosie; Jiang, Brian; Grimm, Lars J

2018-02-01

Women make up half of American medical school graduates, but remain underrepresented among radiologists. This study sought to determine whether workforce gender disparities exist in other countries, and to identify any country-specific indices associated with increased female representation. In this cross-sectional study, 95 professional radiology organizations in 75 countries were contacted via email to provide membership statistics, including proportion of female members, female members aged 35 or under, and women in society leadership positions. Country-specific metrics collected included gross domestic product, Gini index, percent female medical school enrollment, and Gender Development Index for the purposes of univariate multiple regression analysis. Twenty-nine organizations provided data on 184,888 radiologists, representing 26 countries from Europe (n = 12), North America (n = 2), Central/South America (n = 6), Oceania (n = 2), Asia (n = 3), and Africa (n = 1) for a response rate of 34.7% (26/75). Globally, 33.5% of radiologists are female. Women constitute a higher proportion of younger radiologists, with 48.5% of radiologists aged 35 or under being female. Female representation in radiology is lowest in the United States (27.2%), highest in Thailand (85.0%), and most variable in Europe (mean 40.1%, range 28.8%-68.9%). The proportion of female radiologists was positively associated with a country's Gender Development Index (P = .006), percent female medical student enrollment (P = .001), and Gini index (P = .002), and negatively associated with gross domestic product (P = .03). Women are underrepresented in radiology globally, most notably in the United States. Countries with greater representation of women had higher gender equality and percent female medical school enrollment, suggesting these factors may play a role in the gender gap. Copyright © 2018 The Association of University Radiologists. Published by

Developing framework to analyze world-class maintenance (wcm) indicators: gap analysis to highlight challenges and opportunities for the Norwegian petroleum industry

OpenAIRE

Imam, Syeda Fahmida

2012-01-01

Master's thesis in Offshore Technology World-class Maintenance (WCM) is a unique business process which actually does not cost, rather pays back. This study was an initial attempt to understand the extent of WCM concept being utilized in the Norwegian industry. The aim of the study was to develop a framework for analyzing the WCM indicators. For this purpose, the study was focused to: identify measurable WCM indicators, find the trends of WCM in the Norwegian sector, and find gap betwee...

[Research progress of larger flexion gap than extension gap in total knee arthroplasty].

Science.gov (United States)

Zhang, Weisong; Hao, Dingjun

2017-05-01

To summarize the progress of larger flexion gap than extension gap in total knee arthro-plasty (TKA). The domestic and foreign related literature about larger flexion gap than extension gap in TKA, and its impact factors, biomechanical and kinematic features, and clinical results were summarized. During TKA, to adjust the relations of flexion gap and extension gap is one of the key factors of successful operation. The biomechanical, kinematic, and clinical researches show that properly larger flexion gap than extension gap can improve both the postoperative knee range of motion and the satisfaction of patients, but does not affect the stability of the knee joint. However, there are also contrary findings. So adjustment of flexion gap and extension gap during TKA is still in dispute. Larger flexion gap than extension gap in TKA is a new joint space theory, and long-term clinical efficacy, operation skills, and related complications still need further study.

Seed plant features, distribution patterns, diversity hotspots, and conservation gaps in Xinjiang, China

Directory of Open Access Journals (Sweden)

Jihong Huang

2018-06-01

Full Text Available The flora in Xinjiang is unique. Decisions about biodiversity conservation and management based on seed plant diversity hotspots and conservation gaps in Xinjiang are essential to maintain this unique flora. Based on a species distribution dataset of seed plants, we measured seed plant diversity using species richness and phylogenetic diversity indices. Five percent of Xinjiang’s total land area with the highest biodiversity was used to identify hotspots for each index. In total, eight hotspots were identified. Most hotspots were located in mountainous areas, mainly in the Tianshan Mountains and Altai Mountains. Furthermore, we detected conservation gaps for Xinjiang’s seed flora hotspots by overlaying nature reserve maps on to maps of identified hotspots and we designated priority conservation gaps for hotspots by overlaying global biodiversity hotspot maps on to hotspot conservation gaps maps. Most of Xinjiang’s seed plant hotspots are poorly protected; only 10.45% of these hotspots were covered by nature reserves. We suggest that it is essential to promote network function of nature reserves within these hotspots in Xinjiang to conserve this unique flora.

Barriers affecting successful technology enablement of supply chain: An Indian perspective

Science.gov (United States)

Arora, R.; Haleem, A.; Farooquie, J. A.

2018-03-01

In order to compete, organizations need to focus on improving supply chain and technology acts as a major enabler. Technology enablement of supply chain has not always been successful and has been examined by many researchers. The purpose of this paper is to do a systematic literature review of technology enabled supply chain from a strategic viewpoint. The literature is examined from two perspectives. Firstly, it studies the growing interest in technology-enabled supply chain in India. Secondly, it studies barriers affecting technology enablement of supply chain. The literature review identifies that technology enabled supply chain helps in improving performance via effective decision making, monitoring entire supply chain, faster reaction to customer service problems, etc. The research has emphasized the importance of 12 barriers affecting technology enablement. This research will help as a guide for practitioners in order to successfully implement technology and fills the gap in existing literature by highlighting and consolidating the significant research work done in past.

Gap Junctions

Science.gov (United States)

Nielsen, Morten Schak; Axelsen, Lene Nygaard; Sorgen, Paul L.; Verma, Vandana; Delmar, Mario; Holstein-Rathlou, Niels-Henrik

2013-01-01

Gap junctions are essential to the function of multicellular animals, which require a high degree of coordination between cells. In vertebrates, gap junctions comprise connexins and currently 21 connexins are known in humans. The functions of gap junctions are highly diverse and include exchange of metabolites and electrical signals between cells, as well as functions, which are apparently unrelated to intercellular communication. Given the diversity of gap junction physiology, regulation of gap junction activity is complex. The structure of the various connexins is known to some extent; and structural rearrangements and intramolecular interactions are important for regulation of channel function. Intercellular coupling is further regulated by the number and activity of channels present in gap junctional plaques. The number of connexins in cell-cell channels is regulated by controlling transcription, translation, trafficking, and degradation; and all of these processes are under strict control. Once in the membrane, channel activity is determined by the conductive properties of the connexin involved, which can be regulated by voltage and chemical gating, as well as a large number of posttranslational modifications. The aim of the present article is to review our current knowledge on the structure, regulation, function, and pharmacology of gap junctions. This will be supported by examples of how different connexins and their regulation act in concert to achieve appropriate physiological control, and how disturbances of connexin function can lead to disease. © 2012 American Physiological Society. Compr Physiol 2:1981-2035, 2012. PMID:23723031

Thermodynamics, transport phenomena, and electrochemistry of external field-assisted nonthermal food technologies.

Science.gov (United States)

Misra, N N; Martynenko, Alex; Chemat, Farid; Paniwnyk, Larysa; Barba, Francisco J; Jambrak, Anet Režek

2018-07-24

Interest in the development and adoption of nonthermal technologies is burgeoning within the food and bioprocess industry, the associated research community, and among the consumers. This is evident from not only the success of some innovative nonthermal technologies at industrial scale, but also from the increasing number of publications dealing with these topics, a growing demand for foods processed by nonthermal technologies and use of natural ingredients. A notable feature of the nonthermal technologies such as cold plasma, electrohydrodynamic processing, pulsed electric fields, and ultrasound is the involvement of external fields, either electric or sound. Therefore, it merits to study the fundamentals of these technologies and the associated phenomenon with a unified approach. In this review, we revisit the fundamental physical and chemical phenomena governing the selected technologies, highlight similarities, and contrasts, describe few successful applications, and finally, identify the gaps in research.

Identifying and Assessing Effective Mechanisms for Technology Transfer

Science.gov (United States)

2007-03-01

There is a distinct manner in which civilian technology is protected; even though secrecy is one option, as is the case with the Coca - Cola formula...done with the appropriate dedicated resources. They also placed heavy emphasis on acquiring early sponsorship for the technology and be able to set

Sequence-based model of gap gene regulatory network.

Science.gov (United States)

Kozlov, Konstantin; Gursky, Vitaly; Kulakovskiy, Ivan; Samsonova, Maria

2014-01-01

The detailed analysis of transcriptional regulation is crucially important for understanding biological processes. The gap gene network in Drosophila attracts large interest among researches studying mechanisms of transcriptional regulation. It implements the most upstream regulatory layer of the segmentation gene network. The knowledge of molecular mechanisms involved in gap gene regulation is far less complete than that of genetics of the system. Mathematical modeling goes beyond insights gained by genetics and molecular approaches. It allows us to reconstruct wild-type gene expression patterns in silico, infer underlying regulatory mechanism and prove its sufficiency. We developed a new model that provides a dynamical description of gap gene regulatory systems, using detailed DNA-based information, as well as spatial transcription factor concentration data at varying time points. We showed that this model correctly reproduces gap gene expression patterns in wild type embryos and is able to predict gap expression patterns in Kr mutants and four reporter constructs. We used four-fold cross validation test and fitting to random dataset to validate the model and proof its sufficiency in data description. The identifiability analysis showed that most model parameters are well identifiable. We reconstructed the gap gene network topology and studied the impact of individual transcription factor binding sites on the model output. We measured this impact by calculating the site regulatory weight as a normalized difference between the residual sum of squares error for the set of all annotated sites and for the set with the site of interest excluded. The reconstructed topology of the gap gene network is in agreement with previous modeling results and data from literature. We showed that 1) the regulatory weights of transcription factor binding sites show very weak correlation with their PWM score; 2) sites with low regulatory weight are important for the model output; 3

Sustainability Tools Inventory - Initial Gaps Analysis | Science ...

Science.gov (United States)

This report identifies a suite of tools that address a comprehensive set of community sustainability concerns. The objective is to discover whether "gaps" exist in the tool suite’s analytic capabilities. These tools address activities that significantly influence resource consumption, waste generation, and hazard generation including air pollution and greenhouse gases. In addition, the tools have been evaluated using four screening criteria: relevance to community decision making, tools in an appropriate developmental stage, tools that may be transferrable to situations useful for communities, and tools with requiring skill levels appropriate to communities. This document provides an initial gap analysis in the area of community sustainability decision support tools. It provides a reference to communities for existing decision support tools, and a set of gaps for those wishing to develop additional needed tools to help communities to achieve sustainability. It contributes to SHC 1.61.4

Simple indicator to identify the environmental soundness of growth of consumption and technology: "eco-velocity of consumption".

Science.gov (United States)

Nansai, Keisuke; Kagawa, Shigemi; Suh, Sangwon; Inaba, Rokuta; Moriguchi, Yuichi

2007-02-15

Today's material welfare has been achieved at the expense of consumption of finite resources and generation of environmental burdens. Over the past few decades the volume of global consumption has grown dramatically, while at the same time technological advances have enabled products with greater efficiencies. These two directions of change, consumption growth and technological advance, are the foci of the present paper. Using quantitative measures for these two factors, we define a new indicator, "eco-velocity of consumption", analogous to velocity in physics. The indicator not only identifies the environmental soundness of consumption growth and technological advance but also indicates whether and to what extent our society is shifting toward sustainable consumption. This study demonstrates the practicability of the indicator through a case study in which we calculate the eco-velocities of Japanese household consumption in 2 years: 1995 and 2000. The rate of technological advance during the periods concerned is quantified in terms of the embodied carbon dioxide emission per yen of product. The results show that the current growth rate of Japanese household consumption is greater than the rate of technological advance to mitigate carbon dioxide emissions. The eco-velocities at the level of individual commodity groups are also examined, and the sources of changes in eco-velocity for each commodity are identified using structural decomposition analysis.

Micro Ethnographic Research as a Method for Informing Educational Technology Design in Practice

DEFF Research Database (Denmark)

Davidsen, Jacob; Vanderlinde, Ruben

2013-01-01

Objectives and purposes. This paper describes research on how micro ethnographic classroom studies (Mehan, 1979) of the integration of technology can inform researchers understanding of teachers and children’s situated acts with technology. Hence, the objective of this paper is to show stories...... of the integration of technology from the teachers and children’s perspective. The central research question of the study is: how can researchers of educational technology represent the local and situated action of teachers and children to inform future technologies? Theoretical frameworks. Integrating technology...... technology researchers discuss how to bridge the gap between researchers and practitioners (Vanderlinde & Van Braak, 2010). Similar, there is also a gap between educational technology developers and practitioners. This gap between developers of technology and the users have been described in the Scandinavian...

Intracellular trafficking pathways of Cx43 gap junction channels.

Science.gov (United States)

Epifantseva, Irina; Shaw, Robin M

2018-01-01

Gap Junction (GJ) channels, including the most common Connexin 43 (Cx43), have fundamental roles in excitable tissues by facilitating rapid transmission of action potentials between adjacent cells. For instance, synchronization during each heartbeat is regulated by these ion channels at the cardiomyocyte cell-cell border. Cx43 protein has a short half-life, and rapid synthesis and timely delivery of those proteins to particular subdomains are crucial for the cellular organization of gap junctions and maintenance of intracellular coupling. Impairment in gap junction trafficking contributes to dangerous complications in diseased hearts such as the arrhythmias of sudden cardiac death. Of recent interest are the protein-protein interactions with the Cx43 carboxy-terminus. These interactions have significant impact on the full length Cx43 lifecycle and also contribute to trafficking of Cx43 as well as possibly other functions. We are learning that many of the known non-canonical roles of Cx43 can be attributed to the recently identified six endogenous Cx43 truncated isoforms which are produced by internal translation. In general, alternative translation is a new leading edge for proteome expansion and therapeutic drug development. This review highlights recent mechanisms identified in the trafficking of gap junction channels, involvement of other proteins contributing to the delivery of channels to the cell-cell border, and understanding of possible roles of the newly discovered alternatively translated isoforms in Cx43 biology. This article is part of a Special Issue entitled: Gap Junction Proteins edited by Jean Claude Herve. Copyright © 2017 Elsevier B.V. All rights reserved.

A Capstone Project Using the Gap Analysis Model: Closing the College Readiness Gap for Latino English Language Learners with a Focus on School Support and School Counseling Resources

Science.gov (United States)

Jimenez, Evelyn

2013-01-01

This capstone project applied Clark and Estes' (2008) gap analysis framework to identify performance gaps, develop perceived root causes, validate the causes, and formulate research-based solutions to present to Trojan High School. The purpose was to examine ways to increase the academic achievement of ELL students, specifically Latinos, by…

Identifying the Ethical Challenges Encountered by Information Technology Professionals Working within the Nevada Casino Industry

Science.gov (United States)

Essig, Michael R.

2014-01-01

A thematic analysis qualitative study was used to identify the unethical challenges encountered by Information Technology (IT) professionals working within the Nevada casino industry. Fourteen current and former IT leaders working or who worked in the Nevada casino industry were interviewed. Using thematic analysis, nine themes regarding ethical…

Mythic gaps

Directory of Open Access Journals (Sweden)

William Hansen

2014-11-01

Full Text Available Different kinds of omissions sometimes occur, or are perceived to occur, in traditional narratives and in tradition-inspired literature. A familiar instance is when a narrator realizes that he or she does not fully remember the story that he or she has begun to tell, and so leaves out part of it, which for listeners may possibly result in an unintelligible narrative. But many instances of narrative gap are not so obvious. From straightforward, objective gaps one can distinguish less-obvious subjective gaps: in many cases narrators do not leave out anything crucial or truly relevant from their exposition, and yet readers perceive gaps and take steps to fill them. The present paper considers four examples of subjective gaps drawn from ancient Greek literature (the Pandora myth, ancient Roman literature (the Pygmalion legend, ancient Hebrew literature (the Joseph legend, and early Christian literature (the Jesus legend. I consider the quite varied ways in which interpreters expand the inherited texts of these stories, such as by devising names, manufacturing motives, creating backstories, and in general filling in biographical ellipses. Finally, I suggest an explanation for the phenomenon of subjective gaps, arguing that, despite their variety, they have a single cause.

Real-space description of semiconducting band gaps in substitutional systems

International Nuclear Information System (INIS)

Magri, R.; Zunger, A.

1991-01-01

The goal of ''band-gap engineering'' in substitutional lattices is to identify atomic configurations that would give rise to a desired value of the band gap. Yet, current theoretical approaches to the problems, based largely on compilations of band structures for various latice configurations, have not yielded simple rules relating structural motifs to band gaps. We show that the band gap of substitutional AlAs/GaAs lattices can be usefully expanded in terms of a hierarchy of contributions from real-space ''atomic figures'' (pairs, triplets, quadruplets) detemined from first-principles band-structure calculations. Pair figures (up to fourth neighbors) and three-body figures are dominant. In analogy with similar cluster expansions of the total energy, this permits a systematic search among all lattice configurations for those having ''special'' band gaps. This approach enables the design of substitutional systems with certain band-gap properties by assembling atomic figures. As an illustration, we predict that the [0 bar 12]-oriented (AlAs) 1 /(GaAs) 4 /(AlAs) 1 /(GaAs) 2 superlattice has the largest band gap among all Al 0.25 Ga 0.75 As lattices with a maximum of ten cations per unit cell

A Unifying Perspective on Oxygen Vacancies in Wide Band Gap Oxides.

Science.gov (United States)

Linderälv, Christopher; Lindman, Anders; Erhart, Paul

2018-01-04

Wide band gap oxides are versatile materials with numerous applications in research and technology. Many properties of these materials are intimately related to defects, with the most important defect being the oxygen vacancy. Here, using electronic structure calculations, we show that the charge transition level (CTL) and eigenstates associated with oxygen vacancies, which to a large extent determine their electronic properties, are confined to a rather narrow energy range, even while band gap and the electronic structure of the conduction band vary substantially. Vacancies are classified according to their character (deep versus shallow), which shows that the alignment of electronic eigenenergies and CTL can be understood in terms of the transition between cavity-like localized levels in the large band gap limit and strong coupling between conduction band and vacancy states for small to medium band gaps. We consider both conventional and hybrid functionals and demonstrate that the former yields results in very good agreement with the latter provided that band edge alignment is taken into account.

Novel technologies for the detection of undeclared nuclear activities, materials and facilities

Energy Technology Data Exchange (ETDEWEB)

Whichello, Julian V.K.; Annese, Cynthia E. [International Atomic Energy Agency, Vienna (Austria). Division of Technical Support

2008-07-01

This paper will discuss the International Atomic Energy Agency's (IAEA's) Novel Technologies Project and its main goal of developing improved methods and technologies that will further enhance the detection of undeclared nuclear activities, materials and facilities. A major and fundamental task within the Project has been the development of methodologies and tools for identifying, documenting and utilizing nuclear fuel cycle (NFC) indicators and signatures (I and S) to facilitate a nuclear safeguards technology gap analysis. The outcome of this work will provide a basis for a novel range of methods and instruments, the development of which will contribute to the IAEA's overall objective of enhanced detection capabilities. (author)

Spatial Dynamics of Technological Evolution: Technological Relatedness as Driver for Radical Emerging Technologies

DEFF Research Database (Denmark)

Tanner, Anne Nygaard

and applied knowledge in firms, universities, research institutes etc., and 2) the existence of risk-taking actors who are willing and capable of implementing and exploiting radical technologies. This paper focuses on the former. Where evolutionary economics have been occupied by accumulation of knowledge......Despite the consent of the fundamental role technological change plays for economic growth, it seems that little attention has been paid to how new technologies come into being. In particular, an understanding of the spatial and dynamic processes driving the emergence of radical technology...... is lacking. This paper seeks to fill out this research gap by bridging the school of evolutionary economics and the school of economic geography. Following Dosi (1988) two factors are in particular important for technological change in emerging technological paradigms: 1) accumulation of scientific...

Electronic materials with a wide band gap: recent developments

Directory of Open Access Journals (Sweden)

Detlef Klimm

2014-09-01

Full Text Available The development of semiconductor electronics is reviewed briefly, beginning with the development of germanium devices (band gap Eg = 0.66 eV after World War II. A tendency towards alternative materials with wider band gaps quickly became apparent, starting with silicon (Eg = 1.12 eV. This improved the signal-to-noise ratio for classical electronic applications. Both semiconductors have a tetrahedral coordination, and by isoelectronic alternative replacement of Ge or Si with carbon or various anions and cations, other semiconductors with wider Eg were obtained. These are transparent to visible light and belong to the group of wide band gap semiconductors. Nowadays, some nitrides, especially GaN and AlN, are the most important materials for optical emission in the ultraviolet and blue regions. Oxide crystals, such as ZnO and β-Ga2O3, offer similarly good electronic properties but still suffer from significant difficulties in obtaining stable and technologically adequate p-type conductivity.

Closing the Gap GEF Experiences in Global Energy Efficiency

CERN Document Server

Yang, Ming

2013-01-01

Energy efficiency plays and will continue to play an important role in the world to save energy and mitigate greenhouse gas (GHG) emissions. However, little is known on how much additional capital should be invested to ensure using energy efficiently as it should be, and very little is known which sub-areas, technologies, and countries shall achieve maximum greenhouse gas emissions mitigation per dollar of investment in energy efficiency worldwide. Analyzing completed and slowly moving energy efficiency projects by the Global Environment Facility during 1991-2010, Closing the Gap: GEF Experiences in Global Energy Efficiency evaluates impacts of multi-billion-dollar investments in the world energy efficiency. It covers the following areas: 1.       Reviewing the world energy efficiency investment and disclosing the global energy efficiency gap and market barriers that cause the gap; 2.       Leveraging private funds with public funds and other resources in energy efficiency investments; using...

Estimating yield gaps at the cropping system level.

Science.gov (United States)

Guilpart, Nicolas; Grassini, Patricio; Sadras, Victor O; Timsina, Jagadish; Cassman, Kenneth G

2017-05-01

Yield gap analyses of individual crops have been used to estimate opportunities for increasing crop production at local to global scales, thus providing information crucial to food security. However, increases in crop production can also be achieved by improving cropping system yield through modification of spatial and temporal arrangement of individual crops. In this paper we define the cropping system yield potential as the output from the combination of crops that gives the highest energy yield per unit of land and time, and the cropping system yield gap as the difference between actual energy yield of an existing cropping system and the cropping system yield potential. Then, we provide a framework to identify alternative cropping systems which can be evaluated against the current ones. A proof-of-concept is provided with irrigated rice-maize systems at four locations in Bangladesh that represent a range of climatic conditions in that country. The proposed framework identified (i) realistic alternative cropping systems at each location, and (ii) two locations where expected improvements in crop production from changes in cropping intensity (number of crops per year) were 43% to 64% higher than from improving the management of individual crops within the current cropping systems. The proposed framework provides a tool to help assess food production capacity of new systems ( e.g. with increased cropping intensity) arising from climate change, and assess resource requirements (water and N) and associated environmental footprint per unit of land and production of these new systems. By expanding yield gap analysis from individual crops to the cropping system level and applying it to new systems, this framework could also be helpful to bridge the gap between yield gap analysis and cropping/farming system design.

Gender gap or program gap? Students' negotiations of study practice in a course in electromagnetism

Science.gov (United States)

Andersson, Staffan; Johansson, Anders

2016-12-01

[This paper is part of the Focused Collection on Gender in Physics.] This study of achievement differences, as reflected by course grades, on a third-semester electromagnetism course at a Swedish research university was motivated by instructor concerns about gender inequalities. Quantitative analysis showed a gender gap in course grades between female and male students for the period of fall 2007 to spring 2013. Dynamics behind this gap were explored through interpretative discourse analysis on interviews of 21 students who had recently passed the course. A recurring pattern was identified in the interviews. Students described studying electromagnetism as either studying to pass or studying to learn. Their choice of practice was influenced by the significance recognized in the course, which primarily was discussed in relation to program affiliation. Students stressed that perceived differences, in their study context, were larger between students affiliated with different programs than between male and female students on the same program. This was supported by quantitative analysis of course grades in relation to study programs, where the grade difference between female and male students on the same program in most cases were not statistically significant. The gender gap in grades for the whole course was related to different achievements on different programs. Programs further from the discipline of physics had lower mean grades and also enrolled a larger fraction of female students. Society-wide gender differences in interest and study choice are reflected in the grades on this single course. These results displace the achievement gap from the level of individuals to that of programs, and the gender gap from a difference in achievement to a difference in study choice. We discuss the implications of this shift of perspective in relation to gender differences for both research and teaching.

Installations in practice. Gap between technological options and users of health care services; Installaties in de praktijk. Dichten kloof tussen mogelijkheden technologie en zorgontvangers

Energy Technology Data Exchange (ETDEWEB)

Van Hoof, J. [Hogeschool Utrecht, Utrecht (Netherlands)

2009-02-15

Health care and building services professionals are increasingly working together, even though there are apparent differences in each others approaches. This paper will zoom in on these differences. Examples from long-term care and ageing-in-place such as home automation, technology for dementia, medical equipment at home, the need for cooling during hot summers, and special lighting systems should lead to steps to bridge the gap between technology and health care. [Dutch] De zorg en de installatiewereld werken steeds nauwer met elkaar samen, zij het dat elkaars werkwijzen duidelijk verschillen. Dit artikel gaat hier dieper op in. Aan de hand van voorbeelden uit de ouderenzorg en het langer zelfstandig wonen, zoals domotica, technologie voor dementie, medische apparatuur aen huis, koeling bij hete zomers en speciale verlichting, zal worden geprobeerd de technologie dichter naar de zorg toe te laten groeien.

The Knowledge Gap Versus the Belief Gap and Abstinence-Only Sex Education.

Science.gov (United States)

Hindman, Douglas Blanks; Yan, Changmin

2015-08-01

The knowledge gap hypothesis predicts widening disparities in knowledge of heavily publicized public affairs issues among socioeconomic status groups. The belief gap hypothesis extends the knowledge gap hypothesis to account for knowledge and beliefs about politically contested issues based on empirically verifiable information. This analysis of 3 national surveys shows belief gaps developed between liberals and conservatives regarding abstinence-only sex education; socioeconomic status-based knowledge gaps did not widen. The findings partially support both belief gap and knowledge gap hypotheses. In addition, the unique contributions of exposure to Fox News, CNN, and MSNBC in this process were investigated. Only exposure to Fox News was linked to beliefs about abstinence-only sex education directly and indirectly through the cultivation of conservative ideology.

Limitations of Commercializing Fuel Cell Technologies

Science.gov (United States)

Nordin, Normayati

2010-06-01

Fuel cell is the technology that, nowadays, is deemed having a great potential to be used in supplying energy. Basically, fuel cells can be categorized particularly by the kind of employed electrolyte. Several fuel cells types which are currently identified having huge potential to be utilized, namely, Solid Oxide Fuel Cells (SOFC), Molten Carbonate Fuel Cells (MCFC), Alkaline Fuel Cells (AFC), Phosphoric Acid Fuel Cells (PAFC), Polymer Electron Membrane Fuel Cell (PEMFC), Direct Methanol Fuel Cells (DMFC) and Regenerative Fuel Cells (RFC). In general, each of these fuel cells types has their own characteristics and specifications which assign the capability and suitability of them to be utilized for any particular applications. Stationary power generations and transport applications are the two most significant applications currently aimed for the fuel cell market. It is generally accepted that there are lots of advantages if fuel cells can be excessively commercialized primarily in context of environmental concerns and energy security. Nevertheless, this is a demanding task to be accomplished, as there is some gap in fuel cells technology itself which needs a major enhancement. It can be concluded, from the previous study, cost, durability and performance are identified as the main limitations to be firstly overcome in enabling fuel cells technology become viable for the market.

Regression analysis for bivariate gap time with missing first gap time data.

Science.gov (United States)

Huang, Chia-Hui; Chen, Yi-Hau

2017-01-01

We consider ordered bivariate gap time while data on the first gap time are unobservable. This study is motivated by the HIV infection and AIDS study, where the initial HIV contracting time is unavailable, but the diagnosis times for HIV and AIDS are available. We are interested in studying the risk factors for the gap time between initial HIV contraction and HIV diagnosis, and gap time between HIV and AIDS diagnoses. Besides, the association between the two gap times is also of interest. Accordingly, in the data analysis we are faced with two-fold complexity, namely data on the first gap time is completely missing, and the second gap time is subject to induced informative censoring due to dependence between the two gap times. We propose a modeling framework for regression analysis of bivariate gap time under the complexity of the data. The estimating equations for the covariate effects on, as well as the association between, the two gap times are derived through maximum likelihood and suitable counting processes. Large sample properties of the resulting estimators are developed by martingale theory. Simulations are performed to examine the performance of the proposed analysis procedure. An application of data from the HIV and AIDS study mentioned above is reported for illustration.

Global foot-and-mouth disease research update and gap analysis: 3 - vaccines

Science.gov (United States)

In 2014, the Global Foot-and-mouth disease Research Alliance (GFRA) conducted a gap analysis of FMD research. In this paper, we report updated findings in the field of FMD vaccine research. This paper consists of the following four sections: 1) Research priorities identified in the 2010 GFRA gap ana...

The narrow-gap TIG welding concerns the electric power plants manufacturers

International Nuclear Information System (INIS)

Anon.

2009-01-01

Polysoude, France, played host to an expert forum on narrow gap welding from 5-7 November 2008. The successful event welcomed around one hundred experts.The power plant construction sector is currently booming worldwide. For plant construction this means using more pressure-resistant, thick-walled pipes made from high temperature steels. The key quality features of this new steel grade are the values for high creep rupture strength that also apply without restriction as the benchmark for every weld seam on these pipes. In particular, the forum on narrow gap welding addressed this area of automated welding technology. During the forum, Mr Hans-Peter Mariner (Polysoude's CEO), has offered an in-depth insight into the latest developments in narrow gap welding. This presentation highlighted that with wall thicknesses of over 60 mm, welding time is shortened by a factor of five to ten in comparison to conventional TIG processes with a traditional V seam. The welding characteristics of the parent material are the decisive factor in the application of the narrow gap process. Technical advances in equipment technology such as automatic centring, HF-free ignition, seam preparation and optimised gas protection further increase the application limits. The geometry and gap width of the weld groove are based on the mechanical properties of the materials being joined, with the shrinkage characteristics of the seam being particularly important. Another key part of the programme was a presentation on the three different narrow gap-welding techniques. The first involves a single pass weld per layer and torch or work-piece revolution. The second is dual pass welding next to one another, when the seam preparation or positioning exceed the required narrow tolerances of a few tenths of a millimetre for one stringer bead per layer. TIG narrow gap welding with a shuttle-motion electrode is ideal with very large wall thicknesses of 150-200 mm. This is particularly the case if the

Research Facility for Mechanical Press Closed Gap Adjuster

Directory of Open Access Journals (Sweden)

A. A. Ancifirov

2016-01-01

Full Text Available The article describes an example of the research facility for closed gap adjustment mechanism based on the KD2128 closed-die forging press. Its rated force with a servo drive used is 630kN. The servo drive consists of a motor with nominal power of 1.57kW and a frequency converter with power of 7.5kW, which has functions of the programmable logic controller.The article notes that such a facility is expedient and useful for practical classes on forging-andstamping machines at the BMSTU Department of «Technology processing by pressure» to demonstrate the capabilities of existing technological facility, learn a design of forging-andstamping machine units, solve the problems of automatic control, monitoring, and diagnostics in blank manufacturing.The article presents a detailed facility diagram of the closed gap adjustment mechanism and its photograph, describes the mechanism and its basic parameters, gives characteristics of the synchronous motor to drive the mechanism, reviews practical works, which the research facility may provide.Based on the four experiments the article estimates an efficiency of the research facilityuse under consideration, especially when modeling a servo motor shaft under the maximum load. The relevant diagrams confirm experimental results, namely: control current, angle of motor shaft and its speed versus time. Thus, upon the diagram analysis it can be noted that the research facility design allows providing kinematics and dynamics of the press closed gap adjuster.This article describes how to determine the closed gap adjusting accuracy of the press. Eight experiments have been conducted to evaluate a working out control signal to the linear movement of the press punch when using the research facility. It is noted that the linear positioning accuracy of the press punch reaches the hundredth parts of a millimeter of the adjustment value that is sufficient to achieve the required precision when performing operations such as

Potential human factors research relating to modern technology in nuclear power plants

International Nuclear Information System (INIS)

Ketchel, J.; Fink, R.; Hanes, L.; Williges, R.; Williges, B.

1994-01-01

This paper discusses proposed human factors research to address advanced human-machine interface technology in nuclear power plants. It relates to a current EPRI project to identify a prioritized list of specific research issues that could be assessed to improve control room and other user interface areas. The project seeks to bridge the gap between the functional requirements of advanced design initiatives and the human factors research needed to support them. It seeks to identify potential benefits to be expected, as well as potential problems that might be introduced by advanced technology. It provides an organized approach to identifying human factors research needs, information already available, and measures of performance and effectiveness that might be used to assess the value of potential improvements. Those parts of the proposed plan that are subsequently approved by EPRI management and by the utility advisory committee will provide a basis for recommending research priorities

Technology in Parkinson disease: Challenges and Opportunities

Science.gov (United States)

Espay, Alberto J.; Bonato, Paolo; Nahab, Fatta; Maetzler, Walter; Dean, John M.; Klucken, Jochen; Eskofier, Bjoern M.; Merola, Aristide; Horak, Fay; Lang, Anthony E.; Reilmann, Ralf; Giuffrida, Joe; Nieuwboer, Alice; Horne, Malcolm; Little, Max A.; Litvan, Irene; Simuni, Tanya; Dorsey, E. Ray; Burack, Michelle A.; Kubota, Ken; Kamondi, Anita; Godinho, Catarina; Daneault, Jean-Francois; Mitsi, Georgia; Krinke, Lothar; Hausdorff, Jeffery M.; Bloem, Bastiaan R.; Papapetropoulos, Spyros

2016-01-01

The miniaturization, sophistication, proliferation, and accessibility of technologies are enabling the capturing of more and previously inaccessible phenomena in Parkinson disease (PD). However, more information has not translated into greater understanding of disease complexity to satisfy diagnostic and therapeutic needs. Challenges include non-compatible technology platforms, the need for wide-scale and long-term deployment of sensor technology (in particular among vulnerable elderly patients), and the gap between the “big data” acquired with sensitive measurement technologies and their limited clinical application. Major opportunities could be realized if new technologies are developed as part of open-source and/or open-hardware platforms enabling multi-channel data capture, sensitive to the broad range of motor and non-motor problems that characterize PD, and adaptable into self-adjusting, individualized treatment delivery systems. The International Parkinson and Movement Disorders Society Task Force on Technology is entrusted to convene engineers, clinicians, researchers, and patients to promote the development of integrated measurement and closed-loop therapeutic systems with high patient adherence that also serve to: 1) encourage the adoption of clinico-pathophysiologic phenotyping and early detection of critical disease milestones; 2) enhance tailoring of symptomatic therapy; 3) improve subgroup targeting of patients for future testing of disease modifying treatments; and 4) identify objective biomarkers to improve longitudinal tracking of impairments in clinical care and research. This article summarizes the work carried out by the Task Force toward identifying challenges and opportunities in the development of technologies with potential for improving the clinical management and quality of life of individuals with PD. PMID:27125836

Defining the anesthesia gap for reproductive health procedures in resource-limited settings.

Science.gov (United States)

Anderson, R Eleanor; Ahn, Roy; Nelson, Brett D; Chavez, Jean; de Redon, Emily; Burke, Thomas

2014-12-01

In resource-limited settings, severe shortages of anesthetists and anesthesiologists lead to surgical delays that increase maternal and neonatal mortality and morbidity. To more clearly understand the individual components of the anesthesia gap pertaining to reproductive health surgeries and procedures in resource-limited settings. Medline, the Cochrane Library, CINAHL, Embase, and POPLINE were systematically searched for reports published before December 31, 2013. Search terms were related to obstetric surgery, resource-limited settings, and anesthesia. Studies that addressed the use of anesthesia in reproductive procedures in resource-limited settings were included. Reviewers independently evaluated the full text of identified studies, extracted information related to study objectives and conclusions, and identified the anesthesia gap. Overall, 14 publications met the inclusion criteria. A significant lack of infrastructure, equipment and supplies, and trained personnel were identified as key factors responsible for a lack of anesthesia services. A shortage of trained anesthesia providers, equipment, supplies, medications, and infrastructure, along with limitations in transportation in resource-limited settings have produced a wide gap between available anesthesia services and the demand for them for reproductive health surgeries and procedures. Safe, affordable, and scalable solutions to address the anesthesia gap are urgently needed. Copyright © 2014 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

Assessing the impact of a medical librarian on identification of valid and actionable practice gaps for a continuing medical education committee.

Science.gov (United States)

Bartkowiak, Barbara A; Safford, Lindsey A; Stratman, Erik J

2014-01-01

Identifying educational needs related to professional practice gaps can be a complex process for continuing medical education (CME) committees and for physicians who submit activity applications. Medical librarians possess unique skills that may be useful for identifying practice gaps relevant to CME committees. We assessed this assumption by assessing a medical librarian's contributions to practice gap identification for the Marshfield Clinic's CME Committee. We reviewed all locally relevant, locally actionable practice gaps identified annually by various stakeholders and presented to our CME Committee from 2010 to 2013. Total numbers of practice gaps identified, total categorized as actionable, and numbers of subsequent activities resulting from these gaps were calculated for each year. Medical librarian totals were compared to those of other CME committee stakeholders to determine the relative contribution. The medical librarian identified unique, actionable published practice gaps that directly contributed to CME activity planning. For each study year, contributions by the medical librarian grew, from 0 of 27 actionable gaps validated by CME Committee in 2010 to 49 of 108 (45.4%) in 2013. With the librarian's assistance, the number of valid practice gaps submitted between 2010 and 2013 by stakeholders climbed from 23 for 155 activities (14.8%) to 133 for 157 activities (84.7%). Medical librarians can provide a valuable service to CME committees by identifying valid professional practice gaps that inform decisions about educational activities aimed at improving clinical practice. Medical librarians bring into deliberations unique information, including national health policy priorities, practice gaps found in the literature, and point-of-care search engine statistics. © 2014 The Alliance for Continuing Education in the Health Professions, the Society for Academic Continuing Medical Education, and the Council on Continuing Medical Education, Association for

The Differential Valuation of Women's Work: A New Look at the Gender Gap in Lawyers' Incomes

Science.gov (United States)

Dinovitzer, Ronit; Reichman, Nancy; Sterling, Joyce

2009-01-01

This article seeks to identify the mechanisms underlying the gender wage gap among new lawyers. Relying on nationally representative data to examine the salaries of lawyers working fulltime in private practice, we find a gender gap of about 5 percent. Identifying four mechanisms--work profiles, opportunity paths and structures, credentials, and…

How to close the ever widening gap of Africa's agriculture

NARCIS (Netherlands)

Bindraban, P.S.; Löffler, H.J.M.; Rabbinge, R.

2008-01-01

While global food availability increased by 27% per person over the past four decades, it decreased by 12% in Sub-Saharan Africa (SSA). This paper explores the role of technology use on agricultural development to understand the ever widening gap of SSA with other global regions. It looks into land

A Summary of Actinide Enrichment Technologies and Capability Gaps

Energy Technology Data Exchange (ETDEWEB)

Patton, Bradley D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Robinson, Sharon M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-01-01

The evaluation performed in this study indicates that a new program is needed to efficiently provide a national actinide radioisotope enrichment capability to produce milligram-to-gram quantities of unique materials for user communities. This program should leverage past actinide enrichment, the recent advances in stable isotope enrichment, and assessments of the future requirements to cost effectively develop this capability while establishing an experience base for a new generation of researchers in this vital area. Preliminary evaluations indicate that an electromagnetic isotope separation (EMIS) device would have the capability to meet the future needs of the user community for enriched actinides. The EMIS technology could be potentially coupled with other enrichment technologies, such as irradiation, as pre-enrichment and/or post-enrichment systems to increase the throughput, reduce losses of material, and/or reduce operational costs of the base EMIS system. Past actinide enrichment experience and advances in the EMIS technology applied in stable isotope separations should be leveraged with this new evaluation information to assist in the establishment of a domestic actinide radioisotope enrichment capability.

Research, Research Gap and the Research Problem

OpenAIRE

Dissanayake, D.M.N.S.W.

2013-01-01

Mainly, due to new scientific inquiries and technological advancements Knowledge becomes obsolete. So it creates a dilemma where the applicability of so called theories and models which we learnt in class can still be applied to solve problems? Thus, the scholars bring the notion of RESEARCH as a definite solution which enriches the existing understanding of a phenomenon. This can be either a theory testing or a theory extension (theory building) approach. In fact, gap identification and form...

Applying deep learning technology to automatically identify metaphase chromosomes using scanning microscopic images: an initial investigation

Science.gov (United States)

Qiu, Yuchen; Lu, Xianglan; Yan, Shiju; Tan, Maxine; Cheng, Samuel; Li, Shibo; Liu, Hong; Zheng, Bin

2016-03-01

Automated high throughput scanning microscopy is a fast developing screening technology used in cytogenetic laboratories for the diagnosis of leukemia or other genetic diseases. However, one of the major challenges of using this new technology is how to efficiently detect the analyzable metaphase chromosomes during the scanning process. The purpose of this investigation is to develop a computer aided detection (CAD) scheme based on deep learning technology, which can identify the metaphase chromosomes with high accuracy. The CAD scheme includes an eight layer neural network. The first six layers compose of an automatic feature extraction module, which has an architecture of three convolution-max-pooling layer pairs. The 1st, 2nd and 3rd pair contains 30, 20, 20 feature maps, respectively. The seventh and eighth layers compose of a multiple layer perception (MLP) based classifier, which is used to identify the analyzable metaphase chromosomes. The performance of new CAD scheme was assessed by receiver operation characteristic (ROC) method. A number of 150 regions of interest (ROIs) were selected to test the performance of our new CAD scheme. Each ROI contains either interphase cell or metaphase chromosomes. The results indicate that new scheme is able to achieve an area under the ROC curve (AUC) of 0.886+/-0.043. This investigation demonstrates that applying a deep learning technique may enable to significantly improve the accuracy of the metaphase chromosome detection using a scanning microscopic imaging technology in the future.

Gaps in perceived quality of facility services between stakeholders in the built learning environment

NARCIS (Netherlands)

Kok, Herman; Mobach, Mark P.; Omta, Onno; Alexander, K.

2013-01-01

Purpose - This paper aims to identify perception gaps on the quality of facility services among different users of educational buildings, and provide possible explanations for these perception gaps, and discussing the consequences regarding Facility Management (FM) governance.

Adaptation to diverse nitrogen-limited environments by deletion or extrachromosomal element formation of the GAP1 locus

DEFF Research Database (Denmark)

Gresham, D.; Usaite, Renata; Germann, S.M.

2010-01-01

and deletions at the GAP1 locus. GAP1 encodes the general amino acid permease, which transports amino acids across the plasma membrane. We identified a self-propagating extrachromosomal circular DNA molecule that results from intrachromosomal recombination between long terminal repeats (LTRs) flanking GAP1....... Extrachromosomal DNA circles (GAP1(circle)) contain GAP1, the replication origin ARS1116, and a single hybrid LTR derived from recombination between the two flanking LTRs. Formation of the GAP1(circle) is associated with deletion of chromosomal GAP1 (gap1 Delta) and production of a single hybrid LTR at the GAP1...

Exploring the public-private sector wage gap in European countries

OpenAIRE

Christofides, Louis N.; Michael, Maria

2013-01-01

We estimate the public-private sector pay gap for 27 European countries, using the 2008 EU SILC. The coefficients of conditional (on personal and job characteristics) public sector controls give a first impression on wage differences, while decompositions into explained and unexplained components (also accounting for selectivity) allow for a more complete analysis, which helps to identify possible causes of the gap. Regional patterns exist. Separate subsample decompositions based on age, educ...

Results of the Lunar Exploration Analysis Group (LEAG) Gap Review: Specific Action Team (SAT), Examination of Strategic Knowledge Gaps (SKGs) for Human Exploration of the Moon

Science.gov (United States)

Shearer, C. K.; Eppler, D.; Farrell, W.; Gruener, J.; Lawrence, S.; Pellis, N.; Spudis, P. D.; Stopar, J.; Zeigler, R.; Neal, C;

Band gap opening in silicene on MgBr2(0001) induced by Li and Na

KAUST Repository

Zhu, Jiajie

2014-11-12

Silicene consists of a monolayer of Si atoms in a buckled honeycomb structure and is expected to be well compatible with the current Si-based technology. However, the band gap is strongly influenced by the substrate. In this context, the structural and electronic properties of silicene on MgBr2(0001) modified by Li and Na are investigated by first-principles calculations. Charge transfer from silicene (substrate) to substrate (silicene) is found for substitutional doping (intercalation). As compared to a band gap of 0.01 eV on the pristine substrate, strongly enhanced band gaps of 0.65 eV (substitutional doping) and 0.24 eV (intercalation) are achieved. The band gap increases with the dopant concentration.

GAP Analysis Program (GAP)

Data.gov (United States)

Kansas Data Access and Support Center — The Kansas GAP Analysis Land Cover database depicts 43 land cover classes for the state of Kansas. The database was generated using a two-stage hybrid classification...

THE PECULIARITIES OF THE ACCOUNTING OF CONSUMPTIONS CONCERNING GAPS REMOVAL IN VINEYARDS

Directory of Open Access Journals (Sweden)

Tatiana ŞEVCIUC

2013-01-01

Full Text Available Today’s methodology of the accounting of the economic operations concerning gaps removal in vineyards is imperfect; it generates numerous uncertainties and it doesn’t take into account some factors that directly influence gaps removal technology. In our opinion, the rationality of gaps removal in fruitful vineyards may be argued from both economic and biological points. Some authors suggest solving this problem by classifying current accounts that is doubtful as these suggestions don’t have a sound accounting basis and they neglect the fundamental principles of the accounting. That is why, this article suggests the economic way of solving this problem by determining the time of consumptions recovery when planting, caring and growing the cuttings till they give fruit.

Technology support for military capability based acquisition

CSIR Research Space (South Africa)

Thaba, Mphahlela

2017-05-01

Full Text Available gap between capability planning and acquisition of product systems in the SANDF. (Thaba J et al, 2015). The need for decision support tools and technologies to assist capability planners to close this gap and make sound decisions has become more...

Optical study of the band structure of wurtzite GaP nanowires

OpenAIRE

Assali, S.; Greil, J.; Zardo, I.; Belabbes, A.; de Moor, M.W.A.; Kölling, S.; Koenraad, P.M.; Bechstedt, F.; Bakkers, E.P.A.M.; Haverkort, J.E.M.

2016-01-01

We investigated the optical properties of wurtzite (WZ) GaP nanowires by performing photoluminescence (PL) and time-resolved PL measurements in the temperature range from 4 K to 300 K, together with atom probe tomography to identify residual impurities in the nanowires. At low temperature, the WZ GaP luminescence shows donor-acceptor pair emission at 2.115 eV and 2.088 eV, and Burstein-Moss band-filling continuum between 2.180 and 2.253 eV, resulting in a direct band gap above 2.170 eV. Sharp...

Identifying and Assessing Life-Cycle-Related Critical Technology Elements (CTEs) for Technology Readiness Assessments (TRAs)

National Research Council Canada - National Science Library

Mandelbaum, Jay

2006-01-01

.... Because these technologies are not emphasized in the current Technology Readiness Assessment (TRA) process this document is intended to improve the focus on life-cycle-related technologies in TRAs...

Technology development for the Advanced Technology Large Aperture Space Telescope (ATLAST) as a candidate large UV-Optical-Infrared (LUVOIR) surveyor

Science.gov (United States)

Bolcar, Matthew R.; Balasubramanian, Kunjithapatham; Clampin, Mark; Crooke, Julie; Feinberg, Lee; Postman, Marc; Quijada, Manuel; Rauscher, Bernard; Redding, David; Rioux, Norman; Shaklan, Stuart; Stahl, H. Philip; Stahle, Carl; Thronson, Harley

2015-09-01

The Advanced Technology Large Aperture Space Telescope (ATLAST) team has identified five key technologies to enable candidate architectures for the future large-aperture ultraviolet/optical/infrared (LUVOIR) space observatory envisioned by the NASA Astrophysics 30-year roadmap, Enduring Quests, Daring Visions. The science goals of ATLAST address a broad range of astrophysical questions from early galaxy and star formation to the processes that contributed to the formation of life on Earth, combining general astrophysics with direct-imaging and spectroscopy of habitable exoplanets. The key technologies are: internal coronagraphs, starshades (or external occulters), ultra-stable large-aperture telescopes, detectors, and mirror coatings. Selected technology performance goals include: 1x10-10 raw contrast at an inner working angle of 35 milli-arcseconds, wavefront error stability on the order of 10 pm RMS per wavefront control step, autonomous on-board sensing and control, and zero-read-noise single-photon detectors spanning the exoplanet science bandpass between 400 nm and 1.8 μm. Development of these technologies will provide significant advances over current and planned observatories in terms of sensitivity, angular resolution, stability, and high-contrast imaging. The science goals of ATLAST are presented and flowed down to top-level telescope and instrument performance requirements in the context of a reference architecture: a 10-meter-class, segmented aperture telescope operating at room temperature (~290 K) at the sun-Earth Lagrange-2 point. For each technology area, we define best estimates of required capabilities, current state-of-the-art performance, and current Technology Readiness Level (TRL) - thus identifying the current technology gap. We report on current, planned, or recommended efforts to develop each technology to TRL 5.

Phononic Band Gaps in 2D Quadratic and 3D Cubic Cellular Structures.

Science.gov (United States)

Warmuth, Franziska; Körner, Carolin

2015-12-02

The static and dynamic mechanical behaviour of cellular materials can be designed by the architecture of the underlying unit cell. In this paper, the phononic band structure of 2D and 3D cellular structures is investigated. It is shown how the geometry of the unit cell influences the band structure and eventually leads to full band gaps. The mechanism leading to full band gaps is elucidated. Based on this knowledge, a 3D cellular structure with a broad full band gap is identified. Furthermore, the dependence of the width of the gap on the geometry parameters of the unit cell is presented.

THE USE OF GAP AND MAPLE SOFTWARE IN TEACHING GROUP THEORY

Directory of Open Access Journals (Sweden)

Ema Carnia

2017-12-01

Full Text Available Algebra is a subject that must be taken by all students in an undergraduate mathematics study program. However, teachers are often faced with students’ difficulties in understanding some of the concepts that are contained in this subject. The tendency of students who generally follow the development of technology can be seen as an opportunity to overcome these problems. Several studies have been undertaken regarding the use of computers in teaching abstract algebra. This paper will detail a comparison between GAP and Maple software as a commonly used software and constantly updated until today. The paper focused on the concept of group theory as the basis for understanding the course of abstract algebra. Result shows that in terms of visualization, Maple is better than GAP but in terms of substance GAP is better than Maple.

Technology Candidates for Air-to-Air and Air-to-Ground Data Exchange

Science.gov (United States)

Haynes, Brian D.

2015-01-01

Technology Candidates for Air-to-Air and Air-to-Ground Data Exchange is a two-year research effort to visualize the U. S. aviation industry at a point 50 years in the future, and to define potential communication solutions to meet those future data exchange needs. The research team, led by XCELAR, was tasked with identifying future National Airspace System (NAS) scenarios, determining requirements and functions (including gaps), investigating technical and business issues for air, ground, & air-to-ground interactions, and reporting on the results. The project was conducted under technical direction from NASA and in collaboration with XCELAR's partner, National Institute of Aerospace, and NASA technical representatives. Parallel efforts were initiated to define the information exchange functional needs of the future NAS, and specific communication link technologies to potentially serve those needs. Those efforts converged with the mapping of each identified future NAS function to potential enabling communication solutions; those solutions were then compared with, and ranked relative to, each other on a technical basis in a structured analysis process. The technical solutions emerging from that process were then assessed from a business case perspective to determine their viability from a real-world adoption and deployment standpoint. The results of that analysis produced a proposed set of future solutions and most promising candidate technologies. Gap analyses were conducted at two points in the process, the first examining technical factors, and the second as part of the business case analysis. In each case, no gaps or unmet needs were identified in applying the solutions evaluated to the requirements identified. The future communication solutions identified in the research comprise both specific link technologies and two enabling technologies that apply to most or all specific links. As a result, the research resulted in a new analysis approach, viewing the

Filling in biodiversity threat gaps

DEFF Research Database (Denmark)

Joppa, L. N.; O'Connor, Brian; Visconti, Piero

2016-01-01

increase to 10,000 times the background rate should species threatened with extinction succumb to pressures they face (4). Reversing these trends is a focus of the Convention on Biological Diversity's 2020 Strategic Plan for Biodiversity and its 20 Aichi Targets and is explicitly incorporated...... into the United Nations' 2030 Agenda for Sustainable Development and its 17 Sustainable Development Goals (SDGs). We identify major gaps in data available for assessing global biodiversity threats and suggest mechanisms for closing them....

Technique for estimating relocated gap width for gap conductance calculations

International Nuclear Information System (INIS)

Klink, P.H.

1978-01-01

Thermally induced fuel fragmentation and relocation has been demonstrated to influence the thermal behavior of a fuel rod in two ways. The effective fuel pellet conductivity is decreased and pellet-to-cladding heat transfer is improved. This paper presents a correlation between as-built and relocated gap width which, used with the Ross and Stoute Gap Conductance Correlation and an appropriate fuel thermal expansion model, closely predicts the measured gap conductances

AFCI Safeguards Enhancement Study: Technology Development Roadmap

Energy Technology Data Exchange (ETDEWEB)

Smith, Leon E.; Dougan, A.; Tobin, Stephen; Cipiti, B.; Ehinger, Michael H.; Bakel, A. J.; Bean, Robert; Grate, Jay W.; Santi, P.; Bryan, Steven; Kinlaw, M. T.; Schwantes, Jon M.; Burr, Tom; Lehn, Scott A.; Tolk, K.; Chichester, David; Menlove, H.; Vo, D.; Duckworth, Douglas C.; Merkle, P.; Wang, T. F.; Duran, F.; Nakae, L.; Warren, Glen A.; Friedrich, S.; Rabin, M.

2008-12-31

The Advanced Fuel Cycle Initiative (AFCI) Safeguards Campaign aims to develop safeguards technologies and processes that will significantly reduce the risk of proliferation in the U.S. nuclear fuel cycle of tomorrow. The Safeguards Enhancement Study was chartered with identifying promising research and development (R&D) directions over timescales both near-term and long-term, and under safeguards oversight both domestic and international. This technology development roadmap documents recognized gaps and needs in the safeguarding of nuclear fuel cycles, and outlines corresponding performance targets for each of those needs. Drawing on the collective expertise of technologists and user-representatives, a list of over 30 technologies that have the potential to meet those needs was developed, along with brief summaries of each candidate technology. Each summary describes the potential impact of that technology, key research questions to be addressed, and prospective development milestones that could lead to a definitive viability or performance assessment. Important programmatic linkages between U.S. agencies and offices are also described, reflecting the emergence of several safeguards R&D programs in the U.S. and the reinvigoration of nuclear fuel cycles across the globe.

Next Generation Nuclear Plant GAP Analysis Report

Energy Technology Data Exchange (ETDEWEB)

Ball, Sydney J [ORNL; Burchell, Timothy D [ORNL; Corwin, William R [ORNL; Fisher, Stephen Eugene [ORNL; Forsberg, Charles W. [Massachusetts Institute of Technology (MIT); Morris, Robert Noel [ORNL; Moses, David Lewis [ORNL

2008-12-01

As a follow-up to the phenomena identification and ranking table (PIRT) studies conducted recently by NRC on next generation nuclear plant (NGNP) safety, a study was conducted to identify the significant 'gaps' between what is needed and what is already available to adequately assess NGNP safety characteristics. The PIRT studies focused on identifying important phenomena affecting NGNP plant behavior, while the gap study gives more attention to off-normal behavior, uncertainties, and event probabilities under both normal operation and postulated accident conditions. Hence, this process also involved incorporating more detailed evaluations of accident sequences and risk assessments. This study considers thermal-fluid and neutronic behavior under both normal and postulated accident conditions, fission product transport (FPT), high-temperature metals, and graphite behavior and their effects on safety. In addition, safety issues related to coupling process heat (hydrogen production) systems to the reactor are addressed, given the limited design information currently available. Recommendations for further study, including analytical methods development and experimental needs, are presented as appropriate in each of these areas.

Bridging the gap among healthcare workers and decision-makers ...

International Development Research Centre (IDRC) Digital Library (Canada)

Bridging the gap among healthcare workers and decision-makers through improved ... Through this project, researchers will build on insights gained from previous ... and identify the critical factors required for the scale-up and integration of the ...

Canopy gap edge determination and the importance of gap edges for plant diversity

Directory of Open Access Journals (Sweden)

D. Salvador-Van Eysenrode

2002-01-01

Full Text Available Canopy gaps, i.e. openings in the forest cover caused by the fall of structural elements, are considered to be important for the maintenance of diversity and for the forest cycle. A gap can be considered as a young forest patch in the forest matrix, composed of interior surrounded by an edge, both enclosed by a perimeter. Much of the attention has been focused on the gap interior. However, at gap edges the spectrum of regeneration opportunities for plants may be larger than in the interior. Although definitions of gap are still discussed, any definition can describe it in an acceptable way, if justified, but defining edges is complicated and appropriate descriptors should be used. A method to determine gap interior and edge, using light as a descriptor, is presented with an example of gaps from a beech forest (Fagus sylvatica in Belgium. Also, the relevance and implications of gap edges for plant diversity and calculation of forest turnover is discussed.

Identifying concepts for studying implementation of information technology in facilities management

DEFF Research Database (Denmark)

Ebbesen, Poul; Bonke, Sten

2014-01-01

. Background: Experiences from the FM sector indicate that IT systems meant to support FM operations and workflows often do not generate the expected added value neither to the FM department itself nor to the basic organization supported by the FM department. Approach (Theory/Methodology): Based on findings......Purpose: To contribute to identifying a conceptual framework for describing and understanding the processes involved when implementing and using Information Technology (IT) in Facilities Management (FM). This paper discusses how basic concepts from different theories can be applied in parallel when...... from exciting research on IT implementation a range of more generic theoretical concepts applicable to the typical setting or situation of IT implementation in FM has been found. These theoretical concepts all clarify and describe different aspects of the implementation process and they may all...

Information technology-enabled team-based, patient-centered care: The example of depression screening and management in cancer care.

Science.gov (United States)

Randhawa, Gurvaneet S; Ahern, David K; Hesse, Bradford W

2017-03-01

The existing healthcare delivery systems across the world need to be redesigned to ensure high-quality care is delivered to all patients. This redesign needs to ensure care is knowledge-based, patient-centered and systems-minded. The rapid advances in the capabilities of information and communication technology and its recent rapid adoption in healthcare delivery have ensured this technology will play a vital role in the redesign of the healthcare delivery system. This commentary highlights promising new developments in health information technology (IT) that can support patient engagement and self-management as well as team-based, patient-centered care. Collaborative care is an effective approach to screen and treat depression in cancer patients and it is a good example of the benefits of team-based and patient-centered care. However, this approach was developed prior to the widespread adoption and use of health IT. We provide examples to illustrate how health IT can improve prevention and treatment of depression in cancer patients. We found several knowledge gaps that limit our ability to realize the full potential of health IT in the context of cancer and comorbid depression care. These gaps need to be filled to improve patient engagement; enhance the reach and effectiveness of collaborative care and web-based programs to prevent and treat depression in cancer patients. We also identify knowledge gaps in health IT design and implementation. Filling these gaps will help shape policies that enable clinical teams to deliver high-quality cancer care globally.

Understanding the cell-to-module efficiency gap in Cu(In,Ga)(S,Se)2 photovoltaics scale-up

Science.gov (United States)

Bermudez, Veronica; Perez-Rodriguez, Alejandro

2018-06-01

Cu(In,Ga)(S,Se)2 (CIGS) solar cells show record efficiencies comparable to those of crystalline Si-based technologies. Their industrial module production costs are also comparable to those of Si photovoltaics in spite of their much lower production volume. However, the competitiveness of CIGS is compromised by the difference in performance between cell and module scales, known as the cell-to-module efficiency gap, which is significantly higher than in competing industrial photovoltaic technologies. In this Review, we quantify the main cell-to-module efficiency loss mechanisms and discuss the various strategies explored in academia and industry to reduce the efficiency gap: new transparent conductive oxides, hybrid modularization approaches and the use of wide-bandgap solar absorbers in the 1.4-1.5 eV range. To implement these strategies, research gaps relating to various device layers need to be filled.

Virtual Reality and Its Potential Use in Special Education. Identifying Emerging Issues and Trends in Technology for Special Education.

Science.gov (United States)

Woodward, John

As part of a 3-year study to identify emerging issues and trends in technology for special education, this paper addresses the possible contributions of virtual reality technology to educational services for students with disabilities. An example of the use of virtual reality in medical imaging introduces the paper and leads to a brief review of…

Factors Influencing Adoption of Information Technology Infrastructure Library: Utilizing the Technology Acceptance Model (TAM)

Science.gov (United States)

Cox, Din S. Z.

2013-01-01

There is a shortage of evidence based research that provides organizations with the necessary information in support of their technology adoption decisions in relation to ITSM technologies. As such, this research study attempted to bridge the gap by offering insight on possible factors that could influence such decisions. An examination of…

Prediction of Gap Asymmetry in Differential Micro Accelerometers

Directory of Open Access Journals (Sweden)

Xiaoping He

2012-05-01

Full Text Available Gap asymmetry in differential capacitors is the primary source of the zero bias output of force-balanced micro accelerometers. It is also used to evaluate the applicability of differential structures in MEMS manufacturing. Therefore, determining the asymmetry level has considerable significance for the design of MEMS devices. This paper proposes an experimental-theoretical method for predicting gap asymmetry in differential sensing capacitors of micro accelerometers. The method involves three processes: first, bi-directional measurement, which can sharply reduce the influence of the feedback circuit on bias output, is proposed. Experiments are then carried out on a centrifuge to obtain the input and output data of an accelerometer. Second, the analytical input-output relationship of the accelerometer with gap asymmetry and circuit error is theoretically derived. Finally, the prediction methodology combines the measurement results and analytical derivation to identify the asymmetric error of 30 accelerometers fabricated by DRIE. Results indicate that the level of asymmetry induced by fabrication uncertainty is about ±5 × 10⁻², and that the absolute error is about ±0.2 µm under a 4 µm gap.

The SI-Gap: How British Units Are Impeding Advances in STEM

Science.gov (United States)

Jones, M. P.; Cook, Courtney J.

2017-11-01

The United States is one of only three countries in the world that remain uncommitted to the metric system. Perhaps to policymakers the decision to hang on to miles, pounds, and gallons is one of tradition. However, as a physics teacher I have seen firsthand how growing up with U.S. Customary Units (commonly called by the pseudonym "British Units") has negatively impacted my students. Sure, they can convert between "British" and SI units; and they can effectively toggle between SI prefixes. However, they typically lack intuition regarding the values they express in SI. This is a major problem, but is by no means a criticism against them. Their disadvantage is the result of a unique learning gap that exists in the United States. I call it the SI(sī)-gap. The SI-gap not only impedes our ability as teachers to inspire students when it comes to science, technology, engineering, and mathematics (STEM); it also prevents our students from properly assessing the validity of their own results. As we shall soon see, the SI-gap carries consequences beyond the classroom. If we are to solve the problems that relate to the SI-gap, we need to reform the way we introduce SI units to the current generation of students.

A comparison of the wide gap and narrow gap resistive plate chamber

International Nuclear Information System (INIS)

Cerron Zeballos, E.; Crotty, I.; Hatzifotiadou, D.; Valverde, J.L.; Neupane, S.; Peskov, V.; Singh, S.; Williams, M.C.S.; Zichichi, A.

1996-01-01

In this paper we study the performance of a wide gap RPC and compare it with that of a narrow gap RPC, both operated in avalanche mode. We have studied the total charge produced in the avalanche. We have measured the dependence of the performance with rate. In addition we have considered the effect of the tolerance of gas gap and calculated the power dissipated in these two types of RPC. We find that the narrow gap RPC has better timing ability; however the wide gap has superior rate capability, lower power dissipation in the gas volume and can be constructed with less stringent mechanical tolerances. (orig.)

A comparison of the wide gap and narrow gap resistive plate chamber

CERN Document Server

Cerron-Zeballos, E; Hatzifotiadou, D; Lamas-Valverde, J; Neupane, S; Peskov, Vladimir; Singh, S; Williams, M C S; Zichichi, Antonino

1996-01-01

In this paper we study the performance of a wide gap RPC and compare it with that of a narrow gap RPC, both operated in avalanche mode. We have studied the total charge produced in the avalanche. We have measured the dependence of the performance with rate. In addition we have considered the effect of the tolerance of gas gap and calculated the power dissipated in these two types of RPC. We find that the narrow gap RPC has better timing ability; however the wide gap has superior rate capability, lower power dissipation in the gas volume and can be constructed with less stringent mechanical tolerances.

Critical Gap distance in Laser Butt-welding

DEFF Research Database (Denmark)

Bagger, Claus; Olsen, Flemming Ove

1999-01-01

In a number of systematic laboratory experiments the critical gap distance that results in sound beads in laser butt welding is sought identified. By grinding the edges of the sheets, a number of "reference" welds are made and compared to the sheets with shear cut edges. In the tests the gap...... was set at 0.00, 0.02, 0.05, 0.08 and 0.10 mm. Mild steel (St 1203) with a thickness of 0.75 and 1.25 mm with and without zinc coating were analysed. A total of 120 welds were made at different welding speeds.As quality norm DIN 8563 was used to divide the welds into quality classes. A number of welds...... were also x-ray photographed.Of the weld combinations analysed 80 % were of high quality and 17 % of a non-acceptable quality. 90 % of the bad welds had a gap distance larger than 0.05 mm. The results showed that 85 % of the bad welds were shear cut and only 15 % grinded. Two third of the bad welds...

Game Mechanics and Bodily Interactions: Designing Interactive Technologies for Sports Training

DEFF Research Database (Denmark)

Jensen, Mads Møller

and enjoyment. Thus, despite being two coexisting research areas, they do not extend or contribute to one another per se. However, bridging this gap by combining skill acquisition knowledge from sports training technologies with motivational game mechanics from bodily games holds great potential for designing...... and developing relevant and engaging training experiences. I term this combination interactive sports training games. This dissertation bridges this gap by exploring how to design and develop bodily interactions that leverage the quality and engagement of sports training by using game mechanics, but also how...... to identify and avoid the pitfalls and challenges that emerge in the process. It further explores how competition can be facilitated in bodily games and how it affects players. These explorations are done by designing, developing and evaluating innovative interactive sports training games. The results...

Accounting Practitioners Reflect on Faculty Impact: Bridging the Gap between Theory and Practice

Science.gov (United States)

Johnson, Ryan

2014-01-01

A gap exists between the perception of accounting education in the classroom and accounting as it is practiced. This study explores qualitatively the perceptions and experiences of mid-career accounting professionals with respect to the impact of academic faculty on their careers in accounting. The study identifies a perception gap in the…

Demographic characteristics in patients with short-gap and long-gap ...

African Journals Online (AJOL)

Further analysis of this topic is warranted ... Keywords: demographic characteristics, long-gap esophageal atresia, short-gap ... Thus, we conducted the present study to analyze the character- ..... this issue, providing fundamental information.

A Case Study into Microbial Genome Assembly Gap Sequences and Finishing Strategies.

Science.gov (United States)

Utturkar, Sagar M; Klingeman, Dawn M; Hurt, Richard A; Brown, Steven D

2017-01-01

This study characterized regions of DNA which remained unassembled by either PacBio and Illumina sequencing technologies for seven bacterial genomes. Two genomes were manually finished using bioinformatics and PCR/Sanger sequencing approaches and regions not assembled by automated software were analyzed. Gaps present within Illumina assemblies mostly correspond to repetitive DNA regions such as multiple rRNA operon sequences. PacBio gap sequences were evaluated for several properties such as GC content, read coverage, gap length, ability to form strong secondary structures, and corresponding annotations. Our hypothesis that strong secondary DNA structures blocked DNA polymerases and contributed to gap sequences was not accepted. PacBio assemblies had few limitations overall and gaps were explained as cumulative effect of lower than average sequence coverage and repetitive sequences at contig termini. An important aspect of the present study is the compilation of biological features that interfered with assembly and included active transposons, multiple plasmid sequences, phage DNA integration, and large sequence duplication. Our targeted genome finishing approach and systematic evaluation of the unassembled DNA will be useful for others looking to close, finish, and polish microbial genome sequences.

Identifying Interdisciplinary Research Collaboration in Instructional Technology

Science.gov (United States)

Cho, Yonjoo

2017-01-01

Interdisciplinarity is defined as communication and collaboration across academic disciplines. The instructional technology (IT) field has claimed to have an interdisciplinary nature influenced by neighboring fields such as psychology, communication, and management. However, it has been difficult to find outstanding evidence of the field's…

Ab initio Thermodynamic Approach to Identify Mixed Solid Sorbents for CO2 Capture Technology

Directory of Open Access Journals (Sweden)

Yuhua eDuan

2015-10-01

Full Text Available Because the current technologies for capturing CO2 are still too energy intensive, new materials must be developed that can capture CO2 reversibly with acceptable energy costs. At a given CO2 pressure, the turnover temperature (Tt of the reaction of an individual solid that can capture CO2 is fixed. Such Tt may be outside the operating temperature range (ΔTo for a practical capture technology. To adjust Tt to fit the practical ΔTo, in this study, three scenarios of mixing schemes are explored by combining thermodynamic database mining with first principles density functional theory and phonon lattice dynamics calculations. Our calculated results demonstrate that by mixing different types of solids, it’s possible to shift Tt to the range of practical operating temperature conditions. According to the requirements imposed by the pre- and post- combustion technologies and based on our calculated thermodynamic properties for the CO2 capture reactions by the mixed solids of interest, we were able to identify the mixing ratios of two or more solids to form new sorbent materials for which lower capture energy costs are expected at the desired pressure and temperature conditions.

Parental Characteristics and the Achievement Gap in Mathematics: Hierarchical Linear Modeling Analysis of Longitudinal Study of American Youth (LSAY)

Science.gov (United States)

Shoraka, Mohammad; Arnold, Robert; Kim, Eun Sook; Salinitri, Geri; Kromrey, Jeffrey

2015-01-01

One of the most salient problems in education is the achievement gap. The researchers investigated the effects of parental education and parental occupations in science, technology, engineering, mathematics, or medical professions (STEMM) on the achievement gap in mathematics. Because students were nested within schools, two-level Hierarchical…

Identifying the key processes for technology transfer through spin-offs in academic institutions : a case study in Flanders and The Netherlands

OpenAIRE

Meysman, Jasmine; Cleyn, De, Sven H.; Braet, Johan

2017-01-01

Abstract: The position and role of technology transfer offices within universities and academic institutions have changed under influence of todays society, with diminishing government subsidies and technology transfer related policies having their impact on the technology transfer processes. In order to find out what the effect of this impact is, we performed a multiple-case study on six technology transfer offices in Flanders and The Netherlands. As a result of the study, we identified two ...

Selective and lithography-independent fabrication of 20 nm nano-gap electrodes and nano-channels for nanoelectrofluidics applications

International Nuclear Information System (INIS)

Zhang, J Y; Wang, X F; Wang, X D; Fan, Z C; Li, Y; Ji, An; Yang, F H

2010-01-01

A new method has been developed to selectively fabricate nano-gap electrodes and nano-channels by conventional lithography. Based on a sacrificial spacer process, we have successfully obtained sub-100-nm nano-gap electrodes and nano-channels and further reduced the dimensions to 20 nm by shrinking the sacrificial spacer size. Our method shows good selectivity between nano-gap electrodes and nano-channels due to different sacrificial spacer etch conditions. There is no length limit for the nano-gap electrode and the nano-channel. The method reported in this paper also allows for wafer scale fabrication, high throughput, low cost, and good compatibility with modern semiconductor technology.

Do air-gaps behind soft body armour affect protection?

Science.gov (United States)

Tilsley, Lee; Carr, D J; Lankester, C; Malbon, C

2018-02-01

Body armour typically comprises a fabric garment covering the torso combined with hard armour (ceramic/composite). Some users wear only soft armour which provides protection from sharp weapons and pistol ammunition. It is usually recommended that body armour is worn against the body with no air-gaps being present between the wearer and the armour. However, air-gaps can occur in certain situations such as females around the breasts, in badly fitting armour and where manufacturers have incorporated an air-gap claiming improvements in thermophysiological burden. The effect of an air-gap on the ballistic protection and the back face signature (BFS) as a result of a non-perforating ballistic impact was determined. Armour panels representative of typical police armour (400x400 mm) were mounted on calibrated Roma Plastilina No 1 and impacted with 9 mm Luger FMJ (9×19 mm; full metal jacket; Dynamit Nobel DM11A1B2) ammunition at 365±10 m/s with a range of air-gaps (0-15 mm). Whether or not the ammunition perforated the armour was noted, the BFS was measured and the incidence of pencilling (a severe, deep and narrow BFS) was identified. For 0° impacts, a critical air-gap size of 10 mm is detrimental to armour performance for the armour/ammunition combination assessed in this work. Specifically, the incidences of pencilling were more common with a 10 mm air-gap and resulted in BFS depth:volume ratios ≥1.0. For impacts at 30° the armour was susceptible to perforation irrespective of air-gap. This work suggested that an air-gap behind police body armour might result in an increased likelihood of injury. It is recommended that body armour is worn with no air-gap underneath. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Spin Orbit Coupling Gap and Indirect Gap in Strain-Tuned Topological Insulator-Antimonene

OpenAIRE

Cheung, Chi-Ho; Fuh, Huei-Ru; Hsu, Ming-Chien; Lin, Yeu-Chung; Chang, Ching-Ray

2016-01-01

Recently, searching large-bulk band gap topological insulator (TI) is under intensive study. Through k?P theory and first-principles calculations analysis on antimonene, we find that ?-phase antimonene can be tuned to a 2D TI under an in-plane anisotropic strain and the magnitude of direct bulk band gap (SOC gap) depends on the strength of spin-orbit coupling (SOC) which is strain-dependent. As the band inversion of this TI accompanies with an indirect band gap, the TI bulk band gap is the in...

Science and Technology for Communication and Persuasion Abroad: Gap Analysis and Survey

Science.gov (United States)

2012-03-01

technology are heavily influenced by studying technology use in the West—which, some argue, biases the field toward individualist rather than collectivist ...serious games, particularly for non-Western cultures , and to develop new technologies to that end. Such investment should include immersive virtual...environments, which favor different strategies of influence than text-based environments.27 Rilla Khaled, " Culturally -Relevant Persuasive Technology

Sub-arc narrow gap welding of Atucha 2 RPV closure head

International Nuclear Information System (INIS)

Hantsch, H.; Million, K.; Zimmermann, H.

1982-01-01

Narrow gap technology was used for reasons of design and fabrication when welding the closure-head dome to its flange. Preliminary tests had yielded the necessary improvements of the well-proven sub-arc practice. New facilities had to be developed for welding proper and for the accompanying machining work (finishing in the narrow gap). Special measures were adopted for monitoring the welding process and for recording the welding parameters. The new method was tried out on several large test coupons before welding of the final product was started. No difficulties were encountered during the welding job. Fabrication of the closure head is shown in a short film sequence. (orig.)

Mechanics of Fluid-Filled Interstitial Gaps. II. Gap Characteristics in Xenopus Embryonic Ectoderm.

Science.gov (United States)

Barua, Debanjan; Parent, Serge E; Winklbauer, Rudolf

2017-08-22

The ectoderm of the Xenopus embryo is permeated by a network of channels that appear in histological sections as interstitial gaps. We characterized this interstitial space by measuring gap sizes, angles formed between adjacent cells, and curvatures of cell surfaces at gaps. From these parameters, and from surface-tension values measured previously, we estimated the values of critical mechanical variables that determine gap sizes and shapes in the ectoderm, using a general model of interstitial gap mechanics. We concluded that gaps of 1-4 μm side length can be formed by the insertion of extracellular matrix fluid at three-cell junctions such that cell adhesion is locally disrupted and a tension difference between cell-cell contacts and the free cell surface at gaps of 0.003 mJ/m 2 is generated. Furthermore, a cell hydrostatic pressure of 16.8 ± 1.7 Pa and an interstitial pressure of 3.9 ± 3.6 Pa, relative to the central blastocoel cavity of the embryo, was found to be consistent with the observed gap size and shape distribution. Reduction of cell adhesion by the knockdown of C-cadherin increased gap volume while leaving intracellular and interstitial pressures essentially unchanged. In both normal and adhesion-reduced ectoderm, cortical tension of the free cell surfaces at gaps does not return to the high values characteristic of the free surface of the whole tissue. Copyright © 2017 Biophysical Society. Published by Elsevier Inc. All rights reserved.

Closing yield gaps: perils and possibilities for biodiversity conservation.

Science.gov (United States)

Phalan, Ben; Green, Rhys; Balmford, Andrew

2014-04-05

Increasing agricultural productivity to 'close yield gaps' creates both perils and possibilities for biodiversity conservation. Yield increases often have negative impacts on species within farmland, but at the same time could potentially make it more feasible to minimize further cropland expansion into natural habitats. We combine global data on yield gaps, projected future production of maize, rice and wheat, the distributions of birds and their estimated sensitivity to changes in crop yields to map where it might be most beneficial for bird conservation to close yield gaps as part of a land-sparing strategy, and where doing so might be most damaging. Closing yield gaps to attainable levels to meet projected demand in 2050 could potentially help spare an area equivalent to that of the Indian subcontinent. Increasing yields this much on existing farmland would inevitably reduce its biodiversity, and therefore we advocate efforts both to constrain further increases in global food demand, and to identify the least harmful ways of increasing yields. The land-sparing potential of closing yield gaps will not be realized without specific mechanisms to link yield increases to habitat protection (and restoration), and therefore we suggest that conservationists, farmers, crop scientists and policy-makers collaborate to explore promising mechanisms.

Factors shaping effective utilization of health information technology in urban safety-net clinics.

Science.gov (United States)

George, Sheba; Garth, Belinda; Fish, Allison; Baker, Richard

2013-09-01

Urban safety-net clinics are considered prime targets for the adoption of health information technology innovations; however, little is known about their utilization in such safety-net settings. Current scholarship provides limited guidance on the implementation of health information technology into safety-net settings as it typically assumes that adopting institutions have sufficient basic resources. This study addresses this gap by exploring the unique challenges urban resource-poor safety-net clinics must consider when adopting and utilizing health information technology. In-depth interviews (N = 15) were used with key stakeholders (clinic chief executive officers, medical directors, nursing directors, chief financial officers, and information technology directors) from staff at four clinics to explore (a) nonhealth information technology-related clinic needs, (b) how health information technology may provide solutions, and (c) perceptions of and experiences with health information technology. Participants identified several challenges, some of which appear amenable to health information technology solutions. Also identified were requirements for effective utilization of health information technology including physical infrastructural improvements, funding for equipment/training, creation of user groups to share health information technology knowledge/experiences, and specially tailored electronic billing guidelines. We found that despite the potential benefit that can be derived from health information technologies, the unplanned and uninformed introduction of these tools into these settings might actually create more problems than are solved. From these data, we were able to identify a set of factors that should be considered when integrating health information technology into the existing workflows of low-resourced urban safety-net clinics in order to maximize their utilization and enhance the quality of health care in such settings.

The gap-startle paradigm to assess auditory temporal processing: Bridging animal and human research.

Science.gov (United States)

Fournier, Philippe; Hébert, Sylvie

2016-05-01

The gap-prepulse inhibition of the acoustic startle (GPIAS) paradigm is the primary test used in animal research to identify gap detection thresholds and impairment. When a silent gap is presented shortly before a loud startling stimulus, the startle reflex is inhibited and the extent of inhibition is assumed to reflect detection. Here, we applied the same paradigm in humans. One hundred and fifty-seven normal-hearing participants were tested using one of five gap durations (5, 25, 50, 100, 200 ms) in one of the following two paradigms-gap-embedded in or gap-following-the continuous background noise. The duration-inhibition relationship was observable for both conditions but followed different patterns. In the gap-embedded paradigm, GPIAS increased significantly with gap duration up to 50 ms and then more slowly up to 200 ms (trend only). In contrast, in the gap-following paradigm, significant inhibition-different from 0--was observable only at gap durations from 50 to 200 ms. The finding that different patterns are found depending on gap position within the background noise is compatible with distinct mechanisms underlying each of the two paradigms. © 2016 Society for Psychophysiological Research.

Identification of gap cooling phenomena from LAVA-4 experiment using MELCOR

International Nuclear Information System (INIS)

Park, Jong-Hwa; Kim, Dong-Ha; Kim, See-Darl; Kim, Sang-Baik; Kim, Hee-Dong

2000-01-01

During the severe accident, whether the hot debris in. lower head will be cool-down or not is the important issue concerning the plant safety. KAERI has launched the 'LAVA' experimental program to examine the existence of initial gap and its effect on the cooling of hot debris. The objective of this study is to identify the gap cooling phenomena from the analysis of simulation results on LAVA-4 experiment using MELCOR1.8.4 code. Three parameters on the debris coolability in MELCOR are the quenching heat transfer coefficient for the interaction between molten Al 2 O 3 and water, the heat transfer coefficient from debris to wall and the diameter of the particulate debris for calculating the available heat transfer area with water. The sensitivity study was performed with these three parameters. However it was believed that there must be a gap between debris and inside wall during the transient. MELCOR1.8.4 does not consider these gap-cooling phenomena. Therefore a conceptual gap-cooling model has been developed and implemented into the lower plenum model in MELCOR to take into account the gap effect in the lower plenum. When the 'gap model' is implemented, the peak temperature of the vessel wall was reduced and its cooling rate was increased. (author)

Procedures for identifying reasonably available control technology for stationary sources of PM-10. Final report

International Nuclear Information System (INIS)

Fitzpatrick, M.J.; Ellefson, R.

1992-09-01

The guidance document sets forth procedures and identifies sources of information that will assist State and local air pollution control agencies in determining Reasonably Available Control Technology (RACT) for PM-10 (particulate matter having a nominal aerometric diameter of 10 microns or less) emission from existing stationary sources on a case-by-case basis. It provides an annotated bibliography of documents to aid in identifying the activities that cause PM-10 emissions as well as applicable air pollution control measures and their effectiveness in reducing emissions. The most stringent state total particulate matter (PM) emission limits are identified for several categories of PM-10 sources and compared to available emission test data. Finally, guidance is provided on procedures for estimating total capital investment and total annual cost of the control measures which are generally used to control PM-10 emissions

Gender Gap in Science, Technology, Engineering, and Mathematics (STEM): Current Knowledge, Implications for Practice, Policy, and Future Directions.

Science.gov (United States)

Wang, Ming-Te; Degol, Jessica L

2017-03-01

Although the gender gap in math course-taking and performance has narrowed in recent decades, females continue to be underrepresented in math-intensive fields of Science, Technology, Engineering, and Mathematics (STEM). Career pathways encompass the ability to pursue a career as well as the motivation to employ that ability. Individual differences in cognitive capacity and motivation are also influenced by broader sociocultural factors. After reviewing research from the fields of psychology, sociology, economics, and education over the past 30 years, we summarize six explanations for US women's underrepresentation in math-intensive STEM fields: (a) cognitive ability, (b) relative cognitive strengths, (c) occupational interests or preferences, (d) lifestyle values or work-family balance preferences, (e) field-specific ability beliefs, and (f) gender-related stereotypes and biases. We then describe the potential biological and sociocultural explanations for observed gender differences on cognitive and motivational factors and demonstrate the developmental period(s) during which each factor becomes most relevant. We then propose evidence-based recommendations for policy and practice to improve STEM diversity and recommendations for future research directions.

Learning services-based technological ecosystems

OpenAIRE

García-Peñalvo, Francisco J.; Hernández-García, Ángel; Conde, Miguel Á; Fidalgo-Blanco, Ángel; Sein-Echaluce, María L.; Alier, Marc; Llorens Largo, Faraón; Iglesias-Pradas, Santiago

2015-01-01

The gap between technology and learning methods has two important implications: on the one hand, we should not expect the integration of technological advances into teaching to be an easy task; and there is a danger that mature educational technologies and methods might not give an adequate answer to the demands and needs of society, underusing their transforming potential to improve learning processes. This study discusses the need for a new technological environment supporting learning serv...

Gender Gaps in Achievement and Participation in Multiple Introductory Biology Classrooms

Science.gov (United States)

Eddy, Sarah L.; Brownell, Sara E.; Wenderoth, Mary Pat

2014-01-01

Although gender gaps have been a major concern in male-dominated science, technology, engineering, and mathematics disciplines such as physics and engineering, the numerical dominance of female students in biology has supported the assumption that gender disparities do not exist at the undergraduate level in life sciences. Using data from 23 large…

Yield gaps and ecological footprints of potato production systems in Chile

NARCIS (Netherlands)

Haverkort, A.J.

2014-01-01

In Chile, potatoes are grown in a wide range of ecological zones and levels of technology resulting in wide ranges of crop management and yields. The aim of the present study was to assess yield gaps, resource use efficiencies and foot-printing in different potato cropping zones between 18 and 53°

The Fishbone diagram to identify, systematize and analyze the sources of general purpose technologies

OpenAIRE

COCCIA, Mario

2017-01-01

Abstract. This study suggests the fishbone diagram for technological analysis. Fishbone diagram (also called Ishikawa diagrams or cause-and-effect diagrams) is a graphical technique to show the several causes of a specific event or phenomenon. In particular, a fishbone diagram (the shape is similar to a fish skeleton) is a common tool used for a cause and effect analysis to identify a complex interplay of causes for a specific problem or event. The fishbone diagram can be a comprehensive theo...

The Adoption of Grid Computing Technology by Organizations: A Quantitative Study Using Technology Acceptance Model

Science.gov (United States)

Udoh, Emmanuel E.

2010-01-01

Advances in grid technology have enabled some organizations to harness enormous computational power on demand. However, the prediction of widespread adoption of the grid technology has not materialized despite the obvious grid advantages. This situation has encouraged intense efforts to close the research gap in the grid adoption process. In this…

Convergent use of RhoGAP toxins by eukaryotic parasites and bacterial pathogens.

Directory of Open Access Journals (Sweden)

Dominique Colinet

2007-12-01

Full Text Available Inactivation of host Rho GTPases is a widespread strategy employed by bacterial pathogens to manipulate mammalian cellular functions and avoid immune defenses. Some bacterial toxins mimic eukaryotic Rho GTPase-activating proteins (GAPs to inactivate mammalian GTPases, probably as a result of evolutionary convergence. An intriguing question remains whether eukaryotic pathogens or parasites may use endogenous GAPs as immune-suppressive toxins to target the same key genes as bacterial pathogens. Interestingly, a RhoGAP domain-containing protein, LbGAP, was recently characterized from the parasitoid wasp Leptopilina boulardi, and shown to protect parasitoid eggs from the immune response of Drosophila host larvae. We demonstrate here that LbGAP has structural characteristics of eukaryotic RhoGAPs but that it acts similarly to bacterial RhoGAP toxins in mammals. First, we show by immunocytochemistry that LbGAP enters Drosophila immune cells, plasmatocytes and lamellocytes, and that morphological changes in lamellocytes are correlated with the quantity of LbGAP they contain. Demonstration that LbGAP displays a GAP activity and specifically interacts with the active, GTP-bound form of the two Drosophila Rho GTPases Rac1 and Rac2, both required for successful encapsulation of Leptopilina eggs, was then achieved using biochemical tests, yeast two-hybrid analysis, and GST pull-down assays. In addition, we show that the overall structure of LbGAP is similar to that of eukaryotic RhoGAP domains, and we identify distinct residues involved in its interaction with Rac GTPases. Altogether, these results show that eukaryotic parasites can use endogenous RhoGAPs as virulence factors and that despite their differences in sequence and structure, eukaryotic and bacterial RhoGAP toxins are similarly used to target the same immune pathways in insects and mammals.

NEN Division Funding Gap Analysis

International Nuclear Information System (INIS)

Esch, Ernst I.; Goettee, Jeffrey D.; Desimone, David J.; Lakis, Rollin E.; Miko, David K.

2012-01-01

The work in NEN Division revolves around proliferation detection. The sponsor funding model seems to have shifted over the last decades. For the past three lustra, sponsors are mainly interested in funding ideas and detection systems that are already at a technical readiness level 6 (TRL 6 -- one step below an industrial prototype) or higher. Once this level is reached, the sponsoring agency is willing to fund the commercialization, implementation, and training for the systems (TRL 8, 9). These sponsors are looking for a fast turnaround (1-2 years) technology development efforts to implement technology. To support the critical national and international needs for nonprolifertion solutions, we have to maintain a fluent stream of subject matter expertise from the fundamental principals of radiation detection through prototype development all the way to the implementation and training of others. NEN Division has large funding gaps in the Valley of Death region. In the current competitive climate for nuclear nonproliferation projects, it is imminent to increase our lead in this field.

Strategic environmental assessment and monitoring: Arctic key gaps and bridging pathways

International Nuclear Information System (INIS)

Azcárate, Juan; Balfors, Berit; Bring, Arvid; Destouni, Georgia

2013-01-01

The Arctic region undergoes rapid and unprecedented environmental change. Environmental assessment and monitoring is needed to understand and decide how to mitigate and/or adapt to the changes and their impacts on society and ecosystems. This letter analyzes the application of strategic environmental assessment (SEA) and the monitoring, based on environmental observations, that should be part of SEA, elucidates main gaps in both, and proposes an overarching SEA framework to systematically link and improve both with focus on the rapidly changing Arctic region. Shortcomings in the monitoring of environmental change are concretized by examples of main gaps in the observations of Arctic hydroclimatic changes. For relevant identification and efficient reduction of such gaps and remaining uncertainties under typical conditions of limited monitoring resources, the proposed overarching framework for SEA application includes components for explicit gap/uncertainty handling and monitoring, systematically integrated within all steps of the SEA process. The framework further links to adaptive governance, which should explicitly consider key knowledge and information gaps that are identified through and must be handled in the SEA process, and accordingly (re)formulate and promote necessary new or modified monitoring objectives for bridging these gaps. (letter)

Detection of muscle gap by L-BIA in muscle injuries: clinical prognosis.

Science.gov (United States)

Nescolarde, L; Yanguas, J; Terricabras, J; Lukaski, H; Alomar, X; Rosell-Ferrer, J; Rodas, G

2017-06-21

Sport-related muscle injury classifications are based basically on imaging criteria such as ultrasound (US) and magnetic resonance imaging (MRI) without consensus because of a lack of clinical prognostics for return-to-play (RTP), which is conditioned upon the severity of the injury, and this in turn with the muscle gap (muscular fibers retraction). Recently, Futbol Club Barcelona's medical department proposed a new muscle injury classification in which muscle gap plays an important role, with the drawback that it is not always possible to identify by MRI. Localized bioimpedance measurement (L-BIA) has emerged as a non-invasive technique for supporting US and MRI to quantify the disrupted soft tissue structure in injured muscles. To correlate the severity of the injury according to the gap with the RTP, through the percent of change in resistance (R), reactance (Xc) and phase-angle (PA) by L-BIA measurements in 22 muscle injuries. After grouping the data according to the muscle gap (by MRI exam), there were significant differences in R between grade 1 and grade 2f (myotendinous or myofascial muscle injury with feather-like appearance), as well as between grade 2f and grade 2g (myotendinous or myofascial muscle injury with feather and gap). The Xc and PA values decrease significantly between each grade (i.e. 1 versus 2f, 1 versus 2g and 2f versus 2g). In addition, the severity of the muscle gap adversely affected the RTP with significant differences observed between 1 and 2g as well as between 2f and 2g. These results show that L-BIA could aid MRI and US in identifying the severity of an injured muscle according to muscle gap and therefore to accurately predict the RTP.

Is there a gap in the gap? Regional differences in the gender pay gap

OpenAIRE

Hirsch, Boris; König, Marion; Möller, Joachim

2009-01-01

In this paper, we investigate regional differences in the gender pay gap both theoretically and empirically. Within a spatial oligopsony model, we show that more densely populated labour markets are more competitive and constrain employers' ability to discriminate against women. Utilising a large administrative data set for western Germany and a flexible semi-parametric propensity score matching approach, we find that the unexplained gender pay gap for young workers is substantially lower in ...

Identifying and Synchronizing Health Information Technology (HIT) Events from FDA Medical Device Reports.

Science.gov (United States)

Kang, Hong; Wang, Frank; Zhou, Sicheng; Miao, Qi; Gong, Yang

2017-01-01

Health information technology (HIT) events, a subtype of patient safety events, pose a major threat and barrier toward a safer healthcare system. It is crucial to gain a better understanding of the nature of the errors and adverse events caused by current HIT systems. The scarcity of HIT event-exclusive databases and event reporting systems indicates the challenge of identifying the HIT events from existing resources. FDA Manufacturer and User Facility Device Experience (MAUDE) database is a potential resource for HIT events. However, the low proportion and the rapid evolvement of HIT-related events present challenges for distinguishing them from other equipment failures and hazards. We proposed a strategy to identify and synchronize HIT events from MAUDE by using a filter based on structured features and classifiers based on unstructured features. The strategy will help us develop and grow an HIT event-exclusive database, keeping pace with updates to MAUDE toward shared learning.

Proceedings of wide band gap semiconductors

International Nuclear Information System (INIS)

Moustakas, T.D.; Pankove, J.I.; Hamakawa, Y.

1992-01-01

This book contains the proceedings of wide band gap semiconductors. Wide band gap semiconductors are under intense study because of their potential applications in photonic devices in the visible and ultraviolet part of the electromagnetic spectrum, and devices for high temperature, high frequency and high power electronics. Additionally, due to their unique mechanical, thermal, optical, chemical, and electronic properties many wide band gap semiconductors are anticipated to find applications in thermoelectric, electrooptic, piezoelectric and acoustooptic devices as well as protective coatings, hard coatings and heat sinks. Material systems covered in this symposium include diamond, II-VI compounds, III-V nitrides, silicon carbide, boron compounds, amorphous and microcrystalline semiconductors, chalcopyrites, oxides and halides. The various papers addressed recent experimental and theoretical developments. They covered issues related to crystal growth (bulk and thin films), structure and microstructure, defects, doping, optoelectronic properties and device applications. A theoretical session was dedicated to identifying common themes in the heteroepitaxy and the role of defects in doping, compensation and phase stability of this unique class of materials. Important experimental milestones included the demonstrations of bright blue injection luminescence at room temperatures from junctions based on III-V nitrides and a similar result from multiple quantum wells in a ZnSe double heterojunction at liquid nitrogen temperatures

The Challenge of Ensuring Persistency of Identifier Systems in the World of Ever-Changing Technology

Directory of Open Access Journals (Sweden)

Nicholas J. Car

2017-04-01

Full Text Available The identification of information objects has always been important with library collections with indexes having been created in the most ancient times. Since the digital age, many specialised and generic persistent identifier (PID systems have been used to identify digital objects. Just as many ancient indexes have died over time, so too PID systems have had a lifecycle from inception to active phase to paralysis, and eventually a fall into oblivion. Where the indexes within the Great Library at Alexandria finally succumbed to fire, technology change has been the destroyer of more recent digital indexes. We distil four PID system design principles from observations over the years that we think should be implemented by PID system architects to ensure that their systems survive change. The principles: describe how to ensure identifiers’ system and organisation independence; codify the delivery of essential PID system functions; mandate a separation of PID functions from data delivery mechanisms; and require generation of policies detailing how change is handled. In addition to suggesting specific items for each principle, we propose that a platform-independent model (PIM be established for persistent identifiers – of any sort and with any resolver technology – in order to enable transition between present and future systems and the preservation of the identifiers’ functioning. We detail our PID system—the PID Service—that implements the proposed principles and a data model to some extent and we describe an implementation case study of an organisation’s implementation of PID systems that implement the Pillars further but still not completely. Penultimately, we describe in a Future Work section, an opportunity for the use of both the Pillars and the PIM; that of the World Wide Web Consortium’s Permanent Identifier Community Group who is seeking to “set up and maintain a secure permanent, URL re-direction service for the web”.

The serum anion gap in the evaluation of acid-base disorders: what are its limitations and can its effectiveness be improved?

Science.gov (United States)

Kraut, Jeffrey A; Nagami, Glenn T

2013-11-01

The serum anion gap has been utilized to identify errors in the measurement of electrolytes, to detect paraproteins, and, most relevant to the nephrologist, to evaluate patients with suspected acid-base disorders. In regard to the latter purpose, traditionally an increased anion gap is identified when it exceeds the upper limit of normal for a particular clinical laboratory measurement. However, because there is a wide range of normal values (often 8-10 mEq/L), an increase in anion concentration can be present in the absence of an increased anion gap. In addition, the type of retained anion can affect the magnitude of the increase in anion gap relative to change in serum [HCO3(-)] being greater with lactic acidosis compared with ketoacidosis. This review examines the methods of calculation of the serum anion gap in textbooks and published literature, the effect of perturbations other than changes in acid-base balance, and its effectiveness in identifying mild and more severe disturbances in acid-base balance. Limitations of the present methods of determining the normal anion gap and change in the anion gap are highlighted. The possibility of identifying the baseline value for individuals to optimize the use of the calculation in the detection of metabolic acidosis is suggested.

Identificação de atributos críticos de satisfação em um serviço através da análise competitiva do gap de melhoria Identifying critical attributes of satisfaction in a service using the competitive analysis of the improvement gap

Directory of Open Access Journals (Sweden)

Gérson Tontini

2007-04-01

Full Text Available O presente trabalho tem por objetivo apresentar um método para identificar atributos críticos para a satisfação do cliente e oportunidades de melhoria em bens e serviços em um mercado competitivo, reduzindo os problemas apresentados pela análise através da matriz de importância e desempenho proposta por Martilla e James (1977. Quanto a sua metodologia, a pesquisa foi do tipo exploratório-descritiva. A coleta de dados se deu em dois momentos. Inicialmente, foi realizada uma discussão com um grupo de foco com oito clientes de videolocadoras, procurando-se descobrir quais os atributos-chave para sua satisfação. Em seguida, 240 clientes de videolocadoras e alunos de graduação de uma instituição de ensino superior responderam um questionário modificado do modelo proposto por Kano et al. (1984. Para classificação dos atributos, segundo o Modelo Kano, foi utilizada uma análise de gap derivada do método proposto por Tontini e Silveira (2005. Dezenove atributos foram pesquisados, sendo que destes, quatro foram classificados como atrativos, dez como obrigatórios, dois como unidimensionais e três como neutros. Conclui-se que o método de gap corrigido, proposto neste trabalho, pôde auxiliar na identificação de atributos atrativos e obrigatórios para os clientes, permitindo priorizar quais deles deveriam ser objeto de melhoria e quais poderiam se tornar fonte de diferencial competitivo, superando algumas limitações da análise de importância x desempenho e do Modelo Kano tradicional.Using attributes of Video Rental Stores as a case study, this paper presents a method to identify satisfaction attributes and improvement opportunities in products and services in a competitive market, overcoming some of the limitations of the importance performance analysis proposed by Martilla and James (1977. The methodology was of an exploratory-descriptive type. The data collection was carried out in two steps. First, a focus group with 8

Regulatory Technology Development Plan - Sodium Fast Reactor. Mechanistic Source Term - Trial Calculation. Work Plan

International Nuclear Information System (INIS)

Grabaskas, David; Bucknor, Matthew; Jerden, James; Brunett, Acacia J.

2016-01-01

The overall objective of the SFR Regulatory Technology Development Plan (RTDP) effort is to identify and address potential impediments to the SFR regulatory licensing process. In FY14, an analysis by Argonne identified the development of an SFR-specific MST methodology as an existing licensing gap with high regulatory importance and a potentially long lead-time to closure. This work was followed by an initial examination of the current state-of-knowledge regarding SFR source term development (ANLART-3), which reported several potential gaps. Among these were the potential inadequacies of current computational tools to properly model and assess the transport and retention of radionuclides during a metal fuel pool-type SFR core damage incident. The objective of the current work is to determine the adequacy of existing computational tools, and the associated knowledge database, for the calculation of an SFR MST. To accomplish this task, a trial MST calculation will be performed using available computational tools to establish their limitations with regard to relevant radionuclide release/retention/transport phenomena. The application of existing modeling tools will provide a definitive test to assess their suitability for an SFR MST calculation, while also identifying potential gaps in the current knowledge base and providing insight into open issues regarding regulatory criteria/requirements. The findings of this analysis will assist in determining future research and development needs.

Applying revised gap analysis model in measuring hotel service quality.

Science.gov (United States)

Lee, Yu-Cheng; Wang, Yu-Che; Chien, Chih-Hung; Wu, Chia-Huei; Lu, Shu-Chiung; Tsai, Sang-Bing; Dong, Weiwei

2016-01-01

With the number of tourists coming to Taiwan growing by 10-20 % since 2010, the number has increased due to an increasing number of foreign tourists, particularly after deregulation allowed admitting tourist groups, followed later on by foreign individual tourists, from mainland China. The purpose of this study is to propose a revised gap model to evaluate and improve service quality in Taiwanese hotel industry. Thus, service quality could be clearly measured through gap analysis, which was more effective for offering direction in developing and improving service quality. The HOLSERV instrument was used to identify and analyze service gaps from the perceptions of internal and external customers. The sample for this study included three main categories of respondents: tourists, employees, and managers. The results show that five gaps influenced tourists' evaluations of service quality. In particular, the study revealed that Gap 1 (management perceptions vs. customer expectations) and Gap 9 (service provider perceptions of management perceptions vs. service delivery) were more critical than the others in affecting perceived service quality, making service delivery the main area of improvement. This study contributes toward an evaluation of the service quality of the Taiwanese hotel industry from the perspectives of customers, service providers, and managers, which is considerably valuable for hotel managers. It was the aim of this study to explore all of these together in order to better understand the possible gaps in the hotel industry in Taiwan.

Exploring the Importance of Soft and Hard Skills as Perceived by IT Internship Students and Industry: A Gap Analysis

Science.gov (United States)

Patacsil, Frederick F.; Tablatin, Christine Lourrine S.

2017-01-01

The research paper proposes a skills gap methodology that utilized the respondent experiences in the internship program to measure the importance of the Information Technology (IT) skills gap as perceived by IT students and the industry. The questionnaires were formulated based on previous studies, however, was slightly modified, validated and…

Tracking the Creation of Tropical Forest Canopy Gaps with UAV Computer Vision Remote Sensing

Science.gov (United States)

Dandois, J. P.

2015-12-01

The formation of canopy gaps is fundamental for shaping forest structure and is an important component of ecosystem function. Recent time-series of airborne LIDAR have shown great promise for improving understanding of the spatial distribution and size of forest gaps. However, such work typically looks at gap formation across multiple years and important intra-annual variation in gap dynamics remains unknown. Here we present findings on the intra-annual dynamics of canopy gap formation within the 50 ha forest dynamics plot of Barro Colorado Island (BCI), Panama based on unmanned aerial vehicle (UAV) remote sensing. High-resolution imagery (7 cm GSD) over the 50 ha plot was obtained regularly (≈ every 10 days) beginning October 2014 using a UAV equipped with a point and shoot camera. Imagery was processed into three-dimensional (3D) digital surface models (DSMs) using automated computer vision structure from motion / photogrammetric methods. New gaps that formed between each UAV flight were identified by subtracting DSMs between each interval and identifying areas of large deviation. A total of 48 new gaps were detected from 2014-10-02 to 2015-07-23, with sizes ranging from less than 20 m2 to greater than 350 m2. The creation of new gaps was also evaluated across wet and dry seasons with 4.5 new gaps detected per month in the dry season (Jan. - May) and 5.2 per month outside the dry season (Oct. - Jan. & May - July). The incidence of gap formation was positively correlated with ground-surveyed liana stem density (R2 = 0.77, p < 0.001) at the 1 hectare scale. Further research will consider the role of climate in predicting gap formation frequency as well as site history and other edaphic factors. Future satellite missions capable of observing vegetation structure at greater extents and frequencies than airborne observations will be greatly enhanced by the high spatial and temporal resolution bridging scale made possible by UAV remote sensing.

Assessment of the State of the Art of Integrated Vehicle Health Management Technologies as Applicable to Damage Conditions

Science.gov (United States)

Reveley, Mary S.; Kurtoglu, Tolga; Leone, Karen M.; Briggs, Jeffrey L.; Withrow, Colleen A.

2010-01-01

A survey of literature from academia, industry, and other Government agencies assessed the state of the art in current integrated vehicle health management (IVHM) aircraft technologies. These are the technologies that are used for assessing vehicle health at the system and subsystem level. This study reports on how these technologies are employed by major military and commercial platforms for detection, diagnosis, prognosis, and mitigation. Over 200 papers from five conferences from the time period of 2004 to 2009 were reviewed. Over 30 of these IVHM technologies are then mapped into the 17 different adverse event damage conditions identified in a previous study. This study illustrates existing gaps and opportunities for additional research by the NASA IVHM Project.

Exergy Analysis of Air-Gap Membrane Distillation Systems for Water Purification Applications

Directory of Open Access Journals (Sweden)

Daniel Woldemariam

2017-03-01

Full Text Available Exergy analyses are essential tools for the performance evaluation of water desalination and other separation systems, including those featuring membrane distillation (MD. One of the challenges in the commercialization of MD technologies is its substantial heat demand, especially for large scale applications. Identifying such heat flows in the system plays a crucial role in pinpointing the heat loss and thermal integration potential by the help of exergy analysis. This study presents an exergetic evaluation of air-gap membrane distillation (AGMD systems at a laboratory and pilot scale. A series of experiments were conducted to obtain thermodynamic data for the water streams included in the calculations. Exergy efficiency and destruction for two different types of flat-plate AGMD were analyzed for a range of feed and coolant temperatures. The bench scale AGMD system incorporating condensation plate with more favorable heat conductivity contributed to improved performance parameters including permeate flux, specific heat demand, and exergy efficiency. For both types of AGMD systems, the contributions of the major components involved in exergy destruction were identified. The result suggested that the MD modules caused the highest fraction of destructions followed by re-concentrating tanks.

Investigation of photonic band gaps with special emphasis on hyperuniform structures

OpenAIRE

Siedentop, Lukas

2016-01-01

A toolbox of considerable size was collected within the course of this work that enables the study of photonic meta materials. It is now possible to successfully simulate, fabricate and moreover characterise meta materials with a photonic band gap. This is of great interest for applications, where waveguides are one possible object of interest, as well as fundamental theoretical investigations, namely identify the properties a pattern needs to posses to form such a photonic band gap, for exam...

40 CFR 255.10 - Criteria for identifying regions.

Science.gov (United States)

2010-07-01

... institutional gaps or inadequacies are found, regions should be identified keeping in mind which agencies would... section 208 of the Federal Water Pollution Control Act, with underground injection control agencies...

When yield gaps are poverty traps: The paradigm of ecological intensification in African smallholder agriculture

NARCIS (Netherlands)

Tittonell, P.A.; Giller, K.E.

2013-01-01

Yield gaps are pervasive in African smallholder agriculture, and are large for almost all crops in all regions. There is consensus that poor soil fertility and nutrient availability are the major biophysical limitations to agricultural production in the continent. We identify two major yield gaps:

A review of higher education image and reputation literature: Knowledge gaps and a research agenda

Directory of Open Access Journals (Sweden)

Amaia Lafuente-Ruiz-de-Sabando

2018-01-01

Full Text Available Higher education institutions are investing increasing resources in order to achieve favourable perceptions among their stakeholders. However, image and reputation management is a complex issue and how stakeholders perceive universities does not always coincide with the image the latter wish to project. For this reason, in this article we address a review of the literature on higher education image and reputation to identify the main knowledge gaps and establish the research lines that merit deeper examination in the future. The gaps identified highlight the need to improve knowledge about the way perceptions (image and reputation of university institutions are shaped, pinpointing the dimensions or essential aspects that influence their formation and determining whether their degree of influence differs when considering the perspectives of different stakeholders or individuals from different geographical areas. Theoretical propositions related to the identified gaps have been set out.

For the sake of technology?

DEFF Research Database (Denmark)

Olesen, Anne Rørbæk

2016-01-01

While digital technologies are becoming increasingly commonplace in museum practice, research that critically considers the processes in which they emerge is still scarce. This article demonstrates the role of technology views in these processes. Based on ethnographic data from two design processes...... of technology conceptualisations, constructed with inspiration from science and technology studies and information systems research. To bridge the gap, funding bodies and museum designers are encouraged to focus on processes rather than on product specifications when funding and designing digital museum...

Football refereeing: Identifying innovative methods

Directory of Open Access Journals (Sweden)

Reza MohammadKazemi

2014-08-01

Full Text Available The aim of the present study is to identify the potentials innovation in football industry. Data were collected from 10 national and international referees, assistant referees and referees’ supervisors in Iran. In this study, technological innovations are identified that assist better refereeing performances. The analysis revealed a significant relationship between using new technologies and referees ‘performance. The results indicate that elite referees, assistant referees and supervisors agreed to use new technological innovations during the game. According to their comments, this kind of technology causes the referees’ performance development.

Mind the Gap: Technology, Millennial Leadership and the Cross-Generational Workforce

Science.gov (United States)

Murray, Adam

2011-01-01

It comes as no surprise that different generations respond to and utilise emerging technology in vastly different ways. However as more Millennials take on leadership positions within academic libraries, their attitudes towards and uses of technology may bring conflicting expectations for leadership to the forefront. What are the generational…

Human Spaceflight Technology Needs - A Foundation for JSC's Technology Strategy

Science.gov (United States)

Stecklein, Jonette M.

2013-01-01

Human space exploration has always been heavily influenced by goals to achieve a specific mission on a specific schedule. This approach drove rapid technology development, the rapidity of which adds risks as well as provides a major driver for costs and cost uncertainty. The National Aeronautics and Space Administration (NASA) is now approaching the extension of human presence throughout the solar system by balancing a proactive yet less schedule-driven development of technology with opportunistic scheduling of missions as the needed technologies are realized. This approach should provide cost effective, low risk technology development that will enable efficient and effective manned spaceflight missions. As a first step, the NASA Human Spaceflight Architecture Team (HAT) has identified a suite of critical technologies needed to support future manned missions across a range of destinations, including in cis-lunar space, near earth asteroid visits, lunar exploration, Mars moons, and Mars exploration. The challenge now is to develop a strategy and plan for technology development that efficiently enables these missions over a reasonable time period, without increasing technology development costs unnecessarily due to schedule pressure, and subsequently mitigating development and mission risks. NASA's Johnson Space Center (JSC), as the nation s primary center for human exploration, is addressing this challenge through an innovative approach in allocating Internal Research and Development funding to projects. The HAT Technology Needs (TechNeeds) Database has been developed to correlate across critical technologies and the NASA Office of Chief Technologist Technology Area Breakdown Structure (TABS). The TechNeeds Database illuminates that many critical technologies may support a single technical capability gap, that many HAT technology needs may map to a single TABS technology discipline, and that a single HAT technology need may map to multiple TABS technology

Human spaceflight technology needs-a foundation for JSC's technology strategy

Science.gov (United States)

Stecklein, J. M.

Human space exploration has always been heavily influenced by goals to achieve a specific mission on a specific schedule. This approach drove rapid technology development, the rapidity of which added risks and became a major driver for costs and cost uncertainty. The National Aeronautics and Space Administration (NASA) is now approaching the extension of human presence throughout the solar system by balancing a proactive yet less schedule-driven development of technology with opportunistic scheduling of missions as the needed technologies are realized. This approach should provide cost effective, low risk technology development that will enable efficient and effective manned spaceflight missions. As a first step, the NASA Human Spaceflight Architecture Team (HAT) has identified a suite of critical technologies needed to support future manned missions across a range of destinations, including in cis-lunar space, near earth asteroid visits, lunar exploration, Mars moons, and Mars exploration. The challenge now is to develop a strategy and plan for technology development that efficiently enables these missions over a reasonable time period, without increasing technology development costs unnecessarily due to schedule pressure, and subsequently mitigating development and mission risks. NASA's Johnson Space Center (JSC), as the nation's primary center for human exploration, is addressing this challenge through an innovative approach in allocating Internal Research and Development funding to projects. The HAT Technology Needs (Tech Needs) Database has been developed to correlate across critical technologies and the NASA Office of Chief Technologist Technology Area Breakdown Structure (TABS). The TechNeeds Database illuminates that many critical technologies may support a single technical capability gap, that many HAT technology needs may map to a single TABS technology discipline, and that a single HAT technology need may map to multiple TABS technology disciplines. Th

Genetic and functional analysis of the gene encoding GAP-43 in schizophrenia.

Science.gov (United States)

Shen, Yu-Chih; Tsai, Ho-Min; Cheng, Min-Chih; Hsu, Shih-Hsin; Chen, Shih-Fen; Chen, Chia-Hsiang

2012-02-01

In earlier reports, growth-associated protein 43 (GAP-43) has been shown to be critical for initial establishment or reorganization of synaptic connections, a process thought to be disrupted in schizophrenia. Additionally, abnormal GAP-43 expression in different brain regions has been linked to this disorder in postmortem brain studies. In this study, we investigated the involvement of the gene encoding GAP-43 in the susceptibility to schizophrenia. We searched for genetic variants in the promoter region and 3 exons (including both UTR ends) of the GAP-43 gene using direct sequencing in a sample of patients with schizophrenia (n=586) and non-psychotic controls (n=576), both being Han Chinese from Taiwan, and conducted an association and functional study. We identified 11 common polymorphisms in the GAP-43 gene. SNP and haplotype-based analyses displayed no associations with schizophrenia. Additionally, we identified 4 rare variants in 5 out of 586 patients, including 1 variant located at the promoter region (c.-258-4722G>T) and 1 synonymous (V110V) and 2 missense (G150R and P188L) variants located at exon 2. No rare variants were found in the control subjects. The results of the reporter gene assay demonstrated that the regulatory activity of construct containing c.-258-4722T was significantly lower as compared to the wild type construct (c.-258-4722G; panalysis also demonstrated the functional relevance of other rare variants. Our study lends support to the hypothesis of multiple rare mutations in schizophrenia, and it provides genetic clues that indicate the involvement of GAP-43 in this disorder. Copyright © 2011 Elsevier B.V. All rights reserved.

Bridging two translation gaps: a new informatics research agenda for telemonitoring of chronic disease

NARCIS (Netherlands)

Hardisty, A.R.; Peirce, S.C.; Preece, A.; Bolton, C.E.; Conley, E.C.; Gray, W.A.; Rana, O.F.; Yousef, Z.; Elwyn, G.

2011-01-01

OBJECTIVE: To propose a research agenda that addresses technological and other knowledge gaps in developing telemonitoring solutions for patients with chronic diseases, with particular focus on detecting deterioration early enough to intervene effectively. DESIGN: A mixed methods approach

Determining the ’Gap’

Science.gov (United States)

2009-05-01

Army training doctrine, and by adjusting the curriculum of the officer core in order to close the knowledge gap . The author closes by concluding...fight. The research to find these gaps begins with a process trace of doctrine from 1976 to the present, starting with the advent of Active Defense...discovering the one gap , three were found. Upon further examination below, even these initially perceived gaps dissipate under close scrutiny. Gap

Mechanics of Fluid-Filled Interstitial Gaps. I. Modeling Gaps in a Compact Tissue.

Science.gov (United States)

Parent, Serge E; Barua, Debanjan; Winklbauer, Rudolf

2017-08-22

Fluid-filled interstitial gaps are a common feature of compact tissues held together by cell-cell adhesion. Although such gaps can in principle be the result of weak, incomplete cell attachment, adhesion is usually too strong for this to occur. Using a mechanical model of tissue cohesion, we show that, instead, a combination of local prevention of cell adhesion at three-cell junctions by fluidlike extracellular material and a reduction of cortical tension at the gap surface are sufficient to generate stable gaps. The size and shape of these interstitial gaps depends on the mechanical tensions between cells and at gap surfaces, and on the difference between intracellular and interstitial pressures that is related to the volume of the interstitial fluid. As a consequence of the dependence on tension/tension ratios, the presence of gaps does not depend on the absolute strength of cell adhesion, and similar gaps are predicted to occur in tissues of widely differing cohesion. Tissue mechanical parameters can also vary within and between cells of a given tissue, generating asymmetrical gaps. Within limits, these can be approximated by symmetrical gaps. Copyright © 2017 Biophysical Society. Published by Elsevier Inc. All rights reserved.

Identifying Emerging Trends of Financial Business Method Patents

Directory of Open Access Journals (Sweden)

Won Sang Lee

2017-09-01

Full Text Available Financial technology has become an important part of the banking industry in recent times. This study attempts to propose a framework to identify emerging areas and trends using financial business method patents. Based on the abstracts of financial business method patents registered at the United States Patent and Trademark Office, this study first applies latent Dirichlet allocation to identify emerging topics. The probability of the annual occurrence of each topic is adjusted through the exponentially weighted moving average to reflect the importance of the recent probability of topics. Each topic is classified as “hot” or “cold” depending on whether the exponentially weighted moving average of the probabilities exceeds the threshold. We applied survival analysis to the time gap of recurrently becoming hot from a cold status with the associated factor of financial business method patents. The findings suggest that the topic with the short granted period and high forward citation is likely to become hot. In addition, the topic that is aged and specific in narrow areas is likely to continuously change into the hot or cold status. The approach proposed in this study contributes toward understanding topic emergence in the financial area and pursuing sustainable development.

Allogeneic cell therapy bioprocess economics and optimization: single-use cell expansion technologies.

Science.gov (United States)

Simaria, Ana S; Hassan, Sally; Varadaraju, Hemanthram; Rowley, Jon; Warren, Kim; Vanek, Philip; Farid, Suzanne S

2014-01-01

For allogeneic cell therapies to reach their therapeutic potential, challenges related to achieving scalable and robust manufacturing processes will need to be addressed. A particular challenge is producing lot-sizes capable of meeting commercial demands of up to 10(9) cells/dose for large patient numbers due to the current limitations of expansion technologies. This article describes the application of a decisional tool to identify the most cost-effective expansion technologies for different scales of production as well as current gaps in the technology capabilities for allogeneic cell therapy manufacture. The tool integrates bioprocess economics with optimization to assess the economic competitiveness of planar and microcarrier-based cell expansion technologies. Visualization methods were used to identify the production scales where planar technologies will cease to be cost-effective and where microcarrier-based bioreactors become the only option. The tool outputs also predict that for the industry to be sustainable for high demand scenarios, significant increases will likely be needed in the performance capabilities of microcarrier-based systems. These data are presented using a technology S-curve as well as windows of operation to identify the combination of cell productivities and scale of single-use bioreactors required to meet future lot sizes. The modeling insights can be used to identify where future R&D investment should be focused to improve the performance of the most promising technologies so that they become a robust and scalable option that enables the cell therapy industry reach commercially relevant lot sizes. The tool outputs can facilitate decision-making very early on in development and be used to predict, and better manage, the risk of process changes needed as products proceed through the development pathway. © 2013 Wiley Periodicals, Inc.

Gender Pay Gap, Productivity Gap and Discrimination in Canadian Clothing Manufacturing in 1870

OpenAIRE

Catherine L McDevitt; James R Irwin; Kris Inwood

2009-01-01

Women's earnings were less than men's in Canadian clothing factories in 1870. Orthodox neoclassical theory would explain that gender pay gap as a reflection of a gender productivity gap. Using classical hypothesis testing we reject that view, based on a large cross-section of 1870 census data. We find the gender pay gap was significantly larger than the gender productivity gap, much as Hellerstein et al. [1999] found for US manufacturing circa 1990. Our results are clear and compell...

Bridging the Gap: Use of Spaceflight Technologies for Earth-Based Problems

Science.gov (United States)

Brinley, Alaina; Vidlak, Carissa; Davis, Jeffrey R.

2012-01-01

Spaceflight is colloquially deemed, the final frontier, or the last area which humans have not yet explored in great depth. While this is true, there are still many regions on Earth that remain isolated from the urban, socially and electronically connected world. Because travelling to space requires a great deal of foresight, engineers are required to think creatively in order to invent technologies that are durable enough to withstand the rigors of the unique and often treacherous environment of outer space. The innovations that are a result of spaceflight designs can often be applied to life on Earth, particularly in the rural, isolated communities found throughout the world. The NASA Human Health and Performance Center (NHHPC) is a collaborative, virtual forum that connects businesses, non-profit organizations, academia, and government agencies to allow for better distribution of ideas and technology between these entities (http://www.nasa.gov/offices/NHHPC). There are many technologies that have been developed for spaceflight that can be readily applied to rural communities on Earth. For example, water filtration systems designed for spaceflight must be robust and easily repaired; therefore, a system with these qualifications may be used in rural areas on Earth. This particular initiative seeks to connect established, non-profit organizations working in isolated communities throughout the world with NASA technologies devised for spaceflight. These technologies could include water purification systems, solar power generators, or telemedicine techniques. Applying innovative, spaceflight technologies to isolated communities on Earth provides greater benefits from the same research dollars, thus fulfilling the Space Life Science motto at Johnson Space Center: Exploring Space and Enhancing Life. This paper will discuss this NHHPC global outreach initiative and give examples based on the recent work of the organization.

Bridging the gap between sample collection and laboratory analysis: using dried blood spots to identify human exposure to chemical agents

Science.gov (United States)

Hamelin, Elizabeth I.; Blake, Thomas A.; Perez, Jonas W.; Crow, Brian S.; Shaner, Rebecca L.; Coleman, Rebecca M.; Johnson, Rudolph C.

2016-05-01

Public health response to large scale chemical emergencies presents logistical challenges for sample collection, transport, and analysis. Diagnostic methods used to identify and determine exposure to chemical warfare agents, toxins, and poisons traditionally involve blood collection by phlebotomists, cold transport of biomedical samples, and costly sample preparation techniques. Use of dried blood spots, which consist of dried blood on an FDA-approved substrate, can increase analyte stability, decrease infection hazard for those handling samples, greatly reduce the cost of shipping/storing samples by removing the need for refrigeration and cold chain transportation, and be self-prepared by potentially exposed individuals using a simple finger prick and blood spot compatible paper. Our laboratory has developed clinical assays to detect human exposures to nerve agents through the analysis of specific protein adducts and metabolites, for which a simple extraction from a dried blood spot is sufficient for removing matrix interferents and attaining sensitivities on par with traditional sampling methods. The use of dried blood spots can bridge the gap between the laboratory and the field allowing for large scale sample collection with minimal impact on hospital resources while maintaining sensitivity, specificity, traceability, and quality requirements for both clinical and forensic applications.

UK innovation systems for new and renewable energy technologies: drivers, barriers and systems failures

International Nuclear Information System (INIS)

Foxon, T.J.; Gross, R.; Chase, A.; Howes, J.; Arnall, A.; Anderson, D.

2005-01-01

A better understanding of the systemic processes by which innovation occurs is useful, both conceptually and to inform policy-making in support of innovation in more sustainable technologies. This paper analyses current innovation systems in the UK for a range of new and renewable energy technologies, and generates policy recommendations for improving the effectiveness of these innovation systems. Although incentives are in place in the UK to encourage innovation in these technologies, system failures - or 'gaps' - are identified in moving technologies along the innovation chain, preventing their successful commercialisation. Sustained investment will be needed for these technologies to achieve their potential. It is argued that a stable and consistent policy framework is required to help create the conditions for this. In particular, such a framework should be aimed at improving risk/reward ratios for demonstration and pre-commercial stage technologies. This would enhance positive expectations, stimulate learning effects leading to cost reductions, and increase the likelihood of successful commercialisation

NASA Program Office Technology Investments to Enable Future Missions

Science.gov (United States)

Thronson, Harley; Pham, Thai; Ganel, Opher

2018-01-01

The Cosmic Origins (COR) and Physics of the Cosmos (PCOS) Program Offices (POs) reside at NASA GSFC and implement priorities for the NASA HQ Astrophysics Division (APD). One major aspect of the POs’ activities is managing our Strategic Astrophysics Technology (SAT) program to mature technologies for future strategic missions. The Programs follow APD guidance on which missions are strategic, currently informed by the NRC’s 2010 Decadal Survey report, as well as APD’s Implementation Plan and the Astrophysics Roadmap.In preparation for the upcoming 2020 Decadal Survey, the APD has established Science and Technology Definition Teams (STDTs) to study four large-mission concepts: the Origins Space Telescope (née, Far-IR Surveyor), Habitable Exoplanet Imaging Mission, Large UV/Optical/IR Surveyor, and Lynx (née, X-ray Surveyor). The STDTs will develop the science case and design reference mission, assess technology development needs, and estimate the cost of their concept. A fifth team, the L3 Study Team (L3ST), was charged to study potential US contributions to ESA’s planned Laser Interferometer Space Antenna (LISA) gravitational-wave observatory.The POs use a rigorous and transparent process to solicit technology gaps from the scientific and technical communities, and prioritize those entries based on strategic alignment, expected impact, cross-cutting applicability, and urgency. For the past two years, the technology-gap assessments of the four STDTs and the L3ST are included in our process. Until a study team submits its final report, community-proposed changes to gaps submitted or adopted by a study team are forwarded to that study team for consideration.We discuss our technology development process, with strategic prioritization informing calls for SAT proposals and informing investment decisions. We also present results of the 2017 technology gap prioritization and showcase our current portfolio of technology development projects. To date, 96 COR and 86

Heat stress intervention research in construction: gaps and recommendations.

Science.gov (United States)

Yang, Yang; Chan, Albert Ping-Chuen

2017-06-08

Developing heat stress interventions for construction workers has received mounting concerns in recent years. However, limited efforts have been exerted to elaborate the rationale, methodology, and practicality of heat stress intervention in the construction industry. This study aims to review previous heat stress intervention research in construction, to identify the major research gaps in methodological issues, and to offer detailed recommendations for future studies. A total of 35 peer-reviewed journal papers have been identified to develop administrative, environmental or personal engineering interventions to safeguard construction workers. It was found that methodological limitations, such as arbitrary sampling methods and unreliable instruments, could be the major obstacle in undertaking heat stress intervention research. To bridge the identified research gaps, this study then refined a research framework for conducting heat stress intervention studies in the construction industry. The proposed research strategy provides researchers and practitioners with fresh insights into expanding multidisciplinary research areas and solving practical problems in the management of heat stress. The proposed research framework may foster the development of heat stress intervention research in construction, which further aids researchers, practitioners, and policymakers in formulating proper intervention strategies.