WorldWideScience

Sample records for identify physical mechanisms

  1. Identifying mechanisms in the control of quantum dynamics through Hamiltonian encoding

    International Nuclear Information System (INIS)

    Mitra, Abhra; Rabitz, Herschel

    2003-01-01

    A variety of means are now available to design control fields for manipulating the evolution of quantum systems. However, the underlying physical mechanisms often remain obscure, especially in the cases of strong fields and high quantum state congestion. This paper proposes a method to quantitatively determine the various pathways taken by a quantum system in going from the initial state to the final target. The mechanism is revealed by encoding a signal in the system Hamiltonian and decoding the resultant nonlinear distortion of the signal in the system time-evolution operator. The relevant interfering pathways determined by this analysis give insight into the physical mechanisms operative during the evolution of the quantum system. A hierarchy of mechanism identification algorithms with increasing ability to extract more detailed pathway information is presented. The mechanism identification concept is presented in the context of analyzing computer simulations of controlled dynamics. As illustrations of the concept, mechanisms are identified in the control of several simple, discrete-state quantum systems. The mechanism analysis tools reveal the roles of multiple interacting quantum pathways to maximally take advantage of constructive and destructive interference. Similar procedures may be applied directly in the laboratory to identify control mechanisms without resort to computer modeling, although this extension is not addressed in this paper

  2. Underlying mechanisms of improving physical activity behavior after rehabilitation

    NARCIS (Netherlands)

    van der Ploeg, H.P.; Streppel, K.R.; van der Beek, A.J.; van der Woude, L.H.V.; van Harten, W.H.; van Mechelen, W.

    2008-01-01

    Background: Regular physical activity is beneficial for the health and functioning of people with a disability. Effective components of successful physical activity promotion interventions should be identified and disseminated. Purpose: To study the underlying mechanisms of the combined sport

  3. Underlying Mechanisms of Improving Physical Activity Behavior after Rehabilitation

    NARCIS (Netherlands)

    van der Ploeg, Hidde P.; Streppel, Kitty R.M.; van der Beek, Allard J.; Woude, Luc H.V.; van Harten, Willem H.; Vollenbroek-Hutten, Miriam Marie Rosé; van Mechelen, Willem

    2008-01-01

    Background: Regular physical activity is beneficial for the health and functioning of people with a disability. Effective components of successful physical activity promotion interventions should be identified and disseminated. Purpose: To study the underlying mechanisms of the combined sport

  4. New Physical Mechanism for Lightning

    Science.gov (United States)

    Artekha, Sergey N.; Belyan, Andrey V.

    2018-02-01

    The article is devoted to electromagnetic phenomena in the atmosphere. The set of experimental data on the thunderstorm activity is analyzed. It helps to identify a possible physical mechanism of lightning flashes. This mechanism can involve the formation of metallic bonds in thunderclouds. The analysis of the problem is performed at a microphysical level within the framework of quantum mechanics. The mechanism of appearance of metallic conductivity includes the resonant tunneling of electrons along resonance-percolation trajectories. Such bonds allow the charges from the vast cloud charged subsystems concentrate quickly in lightning channel. The formation of metal bonds in the thunderstorm cloudiness is described as the second-order phase transition. A successive mechanism for the process of formation and development of the lightning channel is suggested. This mechanism is associated with the change in the orientation of crystals in growing electric field. Possible consequences of the quantum-mechanical mechanism under discussion are compared with the results of observations.

  5. Physics: quantum mechanics

    International Nuclear Information System (INIS)

    Basdevant, J.L.

    1983-01-01

    This book is the second part of the physic lectures on quantum mechanics from Ecole Polytechnique. It contains some physic complements a little more thoroughly studied, mathematical complements to which refer, and an exercise and problem collection [fr

  6. The emerging quantum the physics behind quantum mechanics

    CERN Document Server

    Pena, Luis de la; Valdes-Hernandez, Andrea

    2014-01-01

    This monograph presents the latest findings from a long-term research project intended to identify the physics behind Quantum Mechanics. A fundamental theory for quantum mechanics is constructed from first physical principles, revealing quantization as an emergent phenomenon arising from a deeper stochastic process. As such, it offers the vibrant community working on the foundations of quantum mechanics an alternative contribution open to discussion. The book starts with a critical summary of the main conceptual problems that still beset quantum mechanics.  The basic consideration is then introduced that any material system is an open system in permanent contact with the random zero-point radiation field, with which it may reach a state of equilibrium. Working from this basis, a comprehensive and self-consistent theoretical framework is then developed. The pillars of the quantum-mechanical formalism are derived, as well as the radiative corrections of nonrelativistic QED, while revealing the underlying physi...

  7. Mechanics lectures on theoretical physics

    CERN Document Server

    Sommerfeld, Arnold Johannes Wilhelm

    1952-01-01

    Mechanics: Lectures on Theoretical Physics, Volume I covers a general course on theoretical physics. The book discusses the mechanics of a particle; the mechanics of systems; the principle of virtual work; and d'alembert's principle. The text also describes oscillation problems; the kinematics, statics, and dynamics of a rigid body; the theory of relative motion; and the integral variational principles of mechanics. Lagrange's equations for generalized coordinates and the theory of Hamilton are also considered. Physicists, mathematicians, and students taking Physics courses will find the book

  8. Physics: quantum mechanics

    International Nuclear Information System (INIS)

    Basdevant, J.L.

    1983-01-01

    From important experiment descriptions (sometimes, intentionally simplified), the essential concepts in Quantum Mechanics are first introduced. Wave function notion is described, Schroedinger equation is established, and, after applications rich in physical signification, quantum state and Hilbert space formalism are introduced, which will help to understand many essential phenomena. Then the quantum mechanic general formulation is written and some important consequences are deduced. This formalism is applied to a simple physical problem series (angular momentum, hydrogen atom, etc.) aiming at assimilating the theory operation and its application [fr

  9. Theoretical physics. Quantum mechanics

    International Nuclear Information System (INIS)

    Rebhan, Eckhard

    2008-01-01

    From the first in two comprehensive volumes appeared Theoretical Physics of the author by this after Mechanics and Electrodynamics also Quantum mechanics appears as thinner single volume. First the illustrative approach via wave mechanics is reproduced. The more abstract Hilbert-space formulation introduces the author later by postulates, which are because of the preceding wave mechanics sufficiently plausible. All concepts of quantum mechanics, which contradict often to the intuitive understanding formed by macroscopic experiences, are extensively discussed and made by means of many examples as well as problems - in the largest part provided with solutions - understandable. To the interpretation of quantum mechanics an extensive special chapter is dedicated. this book arose from courses on theoretical physics, which the author has held at the Heinrich-Heine University in Duesseldorf, and was in numerous repetitions fitted to the requirement of the studyings. it is so designed that it is also after the study suited as reference book or for the renewing. All problems are very thoroughly and such extensively studied that each step is separately reproducible. About motivation and good understandability is cared much

  10. Mathematical physics classical mechanics

    CERN Document Server

    Knauf, Andreas

    2018-01-01

    As a limit theory of quantum mechanics, classical dynamics comprises a large variety of phenomena, from computable (integrable) to chaotic (mixing) behavior. This book presents the KAM (Kolmogorov-Arnold-Moser) theory and asymptotic completeness in classical scattering. Including a wealth of fascinating examples in physics, it offers not only an excellent selection of basic topics, but also an introduction to a number of current areas of research in the field of classical mechanics. Thanks to the didactic structure and concise appendices, the presentation is self-contained and requires only knowledge of the basic courses in mathematics. The book addresses the needs of graduate and senior undergraduate students in mathematics and physics, and of researchers interested in approaching classical mechanics from a modern point of view.

  11. Teaching assistants’ performance at identifying common introductory student difficulties in mechanics revealed by the Force Concept Inventory

    Directory of Open Access Journals (Sweden)

    Alexandru Maries

    2016-05-01

    Full Text Available The Force Concept Inventory (FCI has been widely used to assess student understanding of introductory mechanics concepts by a variety of educators and physics education researchers. One reason for this extensive use is that many of the items on the FCI have strong distractor choices which correspond to students’ alternate conceptions in mechanics. Instruction is unlikely to be effective if instructors do not know the common alternate conceptions of introductory physics students and explicitly take into account students’ initial knowledge states in their instructional design. Here, we discuss research involving the FCI to evaluate one aspect of the pedagogical content knowledge of teaching assistants (TAs: knowledge of introductory student alternate conceptions in mechanics as revealed by the FCI. For each item on the FCI, the TAs were asked to identify the most common incorrect answer choice of introductory physics students. This exercise was followed by a class discussion with the TAs related to this task, including the importance of knowing student difficulties in teaching and learning. Then, we used FCI pretest and post-test data from a large population (∼900 of introductory physics students to assess the extent to which TAs were able to identify alternate conceptions of introductory students related to force and motion. In addition, we carried out think-aloud interviews with graduate students who had more than two semesters of teaching experience in recitations to examine how they reason about the task. We find that while the TAs, on average, performed better than random guessing at identifying introductory students’ difficulties with FCI content, they did not identify many common difficulties that introductory physics students have after traditional instruction. We discuss specific alternate conceptions, the extent to which TAs are able to identify them, and results from the think-aloud interviews that provided valuable information

  12. Quantum mechanics for applied physics and engineering

    CERN Document Server

    Fromhold, Albert T

    2011-01-01

    This excellent text, directed to upper-level undergraduates and graduate students in engineering and applied physics, introduces the fundamentals of quantum mechanics, emphasizing those aspects of quantum mechanics and quantum statistics essential to an understanding of solid-state theory. A heavy background in mathematics and physics is not required beyond basic courses in calculus, differential equations, and calculus-based elementary physics.The first three chapters introduce quantum mechanics (using the Schrödinger equations), quantum statistics, and the free-electron theory of metals. Ch

  13. Mechanics problems in undergraduate physics

    CERN Document Server

    Strelkov, S P

    2013-01-01

    Problems in Undergraduate Physics, Volume I: Mechanics focuses on solutions to problems in physics. The book first discusses the fundamental problems in physics. Topics include laws of conservation of momentum and energy; dynamics of a point particle in circular motion; dynamics of a rotating rigid body; hydrostatics and aerostatics; and acoustics. The text also offers information on solutions to problems in physics. Answers to problems in kinematics, statics, gravity, elastic deformations, vibrations, and hydrostatics and aerostatics are discussed. Solutions to problems related to the laws of

  14. Baseball Physics: A New Mechanics Lab

    Science.gov (United States)

    Wagoner, Kasey; Flanagan, Daniel

    2018-01-01

    The game of baseball provides an interesting laboratory for experimenting with mechanical phenomena (there are many good examples in "The Physics Teacher," available on Professor Alan Nathan's website, and discussed in "Physics of Baseball & Softball"). We have developed a lab, for an introductory-level physics course, that…

  15. Theoretical physics 1 classical mechanics

    CERN Document Server

    Nolting, Wolfgang

    2016-01-01

    This textbook offers a clear and comprehensive introduction to classical mechanics, one of the core components of undergraduate physics courses. The book starts with a thorough introduction to the mathematical tools needed, to make this textbook self-contained for learning. The second part of the book introduces the mechanics of the free mass point and details conservation principles. The third part expands the previous to mechanics of many particle systems. Finally the mechanics of the rigid body is illustrated with rotational forces, inertia and gyroscope movement. Ideally suited to undergraduate students in their first year, the book is enhanced throughout with learning features such as boxed inserts and chapter summaries, with key mathematical derivations highlighted to aid understanding. The text is supported by numerous worked examples and end of chapter problem sets. About the Theoretical Physics series Translated from the renowned and highly successful German editions, the eight volumes of this series...

  16. Mechanisms of physical activity limitation in chronic lung diseases.

    Science.gov (United States)

    Vogiatzis, Ioannis; Zakynthinos, George; Andrianopoulos, Vasileios

    2012-01-01

    In chronic lung diseases physical activity limitation is multifactorial involving respiratory, hemodynamic, and peripheral muscle abnormalities. The mechanisms of limitation discussed in this paper relate to (i) the imbalance between ventilatory capacity and demand, (ii) the imbalance between energy demand and supply to working respiratory and peripheral muscles, and (iii) the factors that induce peripheral muscle dysfunction. In practice, intolerable exertional symptoms (i.e., dyspnea) and/or leg discomfort are the main symptoms that limit physical performance in patients with chronic lung diseases. Furthermore, the reduced capacity for physical work and the adoption of a sedentary lifestyle, in an attempt to avoid breathlessness upon physical exertion, cause profound muscle deconditioning which in turn leads to disability and loss of functional independence. Accordingly, physical inactivity is an important component of worsening the patients' quality of life and contributes importantly to poor prognosis. Identifying the factors which prevent a patient with lung disease to easily carry out activities of daily living provides a unique as well as important perspective for the choice of the appropriate therapeutic strategy.

  17. Mechanisms of Physical Activity Limitation in Chronic Lung Diseases

    Directory of Open Access Journals (Sweden)

    Ioannis Vogiatzis

    2012-01-01

    Full Text Available In chronic lung diseases physical activity limitation is multifactorial involving respiratory, hemodynamic, and peripheral muscle abnormalities. The mechanisms of limitation discussed in this paper relate to (i the imbalance between ventilatory capacity and demand, (ii the imbalance between energy demand and supply to working respiratory and peripheral muscles, and (iii the factors that induce peripheral muscle dysfunction. In practice, intolerable exertional symptoms (i.e., dyspnea and/or leg discomfort are the main symptoms that limit physical performance in patients with chronic lung diseases. Furthermore, the reduced capacity for physical work and the adoption of a sedentary lifestyle, in an attempt to avoid breathlessness upon physical exertion, cause profound muscle deconditioning which in turn leads to disability and loss of functional independence. Accordingly, physical inactivity is an important component of worsening the patients’ quality of life and contributes importantly to poor prognosis. Identifying the factors which prevent a patient with lung disease to easily carry out activities of daily living provides a unique as well as important perspective for the choice of the appropriate therapeutic strategy.

  18. Mechanics and Physics of Precise Vacuum Mechanisms

    CERN Document Server

    Deulin, E. A; Panfilov, Yu V; Nevshupa, R. A

    2010-01-01

    In this book the Russian expertise in the field of the design of precise vacuum mechanics is summarized. A wide range of physical applications of mechanism design in electronic, optical-electronic, chemical, and aerospace industries is presented in a comprehensible way. Topics treated include the method of microparticles flow regulation and its determination in vacuum equipment and mechanisms of electronics; precise mechanisms of nanoscale precision based on magnetic and electric rheology; precise harmonic rotary and not-coaxial nut-screw linear motion vacuum feedthroughs with technical parameters considered the best in the world; elastically deformed vacuum motion feedthroughs without friction couples usage; the computer system of vacuum mechanisms failure predicting. This English edition incorporates a number of features which should improve its usefulness as a textbook without changing the basic organization or the general philosophy of presentation of the subject matter of the original Russian work. Exper...

  19. Theoretical physics 6 quantum mechanics : basics

    CERN Document Server

    Nolting, Wolfgang

    2017-01-01

    This textbook offers a clear and comprehensive introduction to the basics of quantum mechanics, one of the core components of undergraduate physics courses. It follows on naturally from the previous volumes in this series, thus developing the physical understanding further on to quantized states. The first part of the book introduces wave equations while exploring the Schrödinger equation and the hydrogen atom. More complex themes are covered in the second part of the book, which describes the Dirac formulism of quantum mechanics. Ideally suited to undergraduate students with some grounding in classical mechanics and electrodynamics, the book is enhanced throughout with learning features such as boxed inserts and chapter summaries, with key mathematical derivations highlighted to aid understanding. The text is supported by numerous worked examples and end of chapter problem sets. About the Theoretical Physics series Translated from the renowned and highly successful German editions, the eight volumes of this...

  20. Facts at your fingertips introducing physics : mechanics

    CERN Document Server

    Bateman, Graham

    2011-01-01

    This series explains and illustrates the science of physics and its everyday applications. Physics is concerned with matter - the stuff from which everything is made - and with energy in all its forms. Mechanics deals with force and motion. In order for something to move a force must be involved, and when opposing forces are equal an object will be stationary.While this book deals primarily with mechanics it also describes levers and other simple machines. Numerous diagrams and practical experiments help to provide the perfect introduction to the science of physics.

  1. Identifying the critical physical demanding tasks of paramedic work: Towards the development of a physical employment standard.

    Science.gov (United States)

    Fischer, Steven L; Sinden, Kathryn E; MacPhee, Renee S

    2017-11-01

    Public safety related occupations including police, fire and military commonly apply physical employment standard (PES) to facilitate job matching, an approach to evaluate if candidates demonstrate acceptable physical capabilities as required to perform the job safely and effectively. In Canada, paramedics remain as one of the few public safety occupations without an evidence-based, validated PES. The purpose of this study was to document and describe the physical demands of paramedic work and to identify the most physically demanding tasks. These outcomes are essential to inform the design and development of an evidence-based PES for the paramedic sector. Physical demands of paramedic work were documented and described using a direct observation-based task analysis technique. Five paramedic's were trained to document the physical demands of their work, then applied their training to observe more than 90 calls over the course of 20 full 12-h work shifts. Physical demands data were then listed in a survey, administered service-wide, where 155 frontline paramedics identified critically demanding tasks and rank-ordered physical demands from not physically demanding to very strongly demanding. Critically important and physically demanding tasks were identified such as: transferring a patient; loading or unloading a stretcher in to or out of the ambulance; performing CPR; and, raising and lowering a stretcher. It is important that a paramedic-based PES evaluate a candidate's physical capabilities to perform the critical and physically demanding tasks identified in this study. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Physics and Mechanics of New Materials and Their Applications

    CERN Document Server

    Chang, Shun-Hsyung; Gupta, Vijay

    2018-01-01

    This book presents selected peer-reviewed contributions from the 2017 International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2017 (Jabalpur, India, 14–16 October, 2017), which is devoted to processing techniques, physics, mechanics, and applications of advanced materials. The book focuses on a wide spectrum of nanostructures, ferroelectric crystals, materials and composites as well as promising materials with special properties. It presents nanotechnology approaches, modern environmentally friendly piezoelectric and ferromagnetic techniques and physical and mechanical studies of the structural and physical–mechanical properties of materials. Various original mathematical and numerical methods are applied to the solution of different technological, mechanical and physical problems that are interesting from theoretical, modeling and experimental points of view. Further, the book highlights novel devices with high accuracy, longevity and extended capabilities ...

  3. Theoretical physics 2 analytical mechanics

    CERN Document Server

    Nolting, Wolfgang

    2016-01-01

    This textbook offers a clear and comprehensive introduction to analytical mechanics, one of the core components of undergraduate physics courses.It follows on naturally from the previous volumes in this series, thus expanding the knowledge in classical mechanics. The book starts with a thorough introduction into Lagrangian mechanics, detailing the d’Alembert principle, Hamilton’s principle and conservation laws. It continues with an in-depth explanation of Hamiltonian mechanics, illustrated by canonical and Legendre transformation, the generalization to quantum mechanics through Poisson brackets and all relevant variational principles. Finally, the Hamilton-Jacobi theory and the transition to wave mechanics are presented in detail. Ideally suited to undergraduate students with some grounding in classical mechanics, the book is enhanced throughout with learning features such as boxed inserts and chapter summaries, with key mathematical derivations highlighted to aid understanding. The text is supported by ...

  4. An improved anti-leech mechanism based on session identifier

    Science.gov (United States)

    Zhang, Jianbiao; Zhu, Tong; Zhang, Han; Lin, Li

    2012-01-01

    With the rapid development of information technology and extensive requirement of network resource sharing, plenty of resource hotlinking phenomenons appear on the internet. The hotlinking problem not only harms the interests of legal websites but also leads to a great affection to fair internet environment. The anti-leech technique based on session identifier is highly secure, but the transmission of session identifier in plaintext form causes some security flaws. In this paper, a proxy hotlinking technique based on session identifier is introduced firstly to illustrate these security flaws; next, this paper proposes an improved anti-leech mechanism based on session identifier, the mechanism takes the random factor as the core and detects hotlinking request using a map table that contains random factor, user's information and time stamp; at last the paper analyzes the security of mechanism in theory. The result reveals that the improved mechanism has the merits of simple realization, high security and great flexibility.

  5. Identifying links between origami and compliant mechanisms

    Directory of Open Access Journals (Sweden)

    H. C. Greenberg

    2011-12-01

    Full Text Available Origami is the art of folding paper. In the context of engineering, orimimetics is the application of folding to solve problems. Kinetic origami behavior can be modeled with the pseudo-rigid-body model since the origami are compliant mechanisms. These compliant mechanisms, when having a flat initial state and motion emerging out of the fabrication plane, are classified as lamina emergent mechanisms (LEMs. To demonstrate the feasibility of identifying links between origami and compliant mechanism analysis and design methods, four flat folding paper mechanisms are presented with their corresponding kinematic and graph models. Principles from graph theory are used to abstract the mechanisms to show them as coupled, or inter-connected, mechanisms. It is anticipated that this work lays a foundation for exploring methods for LEM synthesis based on the analogy between flat-folding origami models and linkage assembly.

  6. A statistical mechanical interpretation of algorithmic information theory: Total statistical mechanical interpretation based on physical argument

    International Nuclear Information System (INIS)

    Tadaki, Kohtaro

    2010-01-01

    The statistical mechanical interpretation of algorithmic information theory (AIT, for short) was introduced and developed by our former works [K. Tadaki, Local Proceedings of CiE 2008, pp. 425-434, 2008] and [K. Tadaki, Proceedings of LFCS'09, Springer's LNCS, vol. 5407, pp. 422-440, 2009], where we introduced the notion of thermodynamic quantities, such as partition function Z(T), free energy F(T), energy E(T), statistical mechanical entropy S(T), and specific heat C(T), into AIT. We then discovered that, in the interpretation, the temperature T equals to the partial randomness of the values of all these thermodynamic quantities, where the notion of partial randomness is a stronger representation of the compression rate by means of program-size complexity. Furthermore, we showed that this situation holds for the temperature T itself, which is one of the most typical thermodynamic quantities. Namely, we showed that, for each of the thermodynamic quantities Z(T), F(T), E(T), and S(T) above, the computability of its value at temperature T gives a sufficient condition for T is an element of (0,1) to satisfy the condition that the partial randomness of T equals to T. In this paper, based on a physical argument on the same level of mathematical strictness as normal statistical mechanics in physics, we develop a total statistical mechanical interpretation of AIT which actualizes a perfect correspondence to normal statistical mechanics. We do this by identifying a microcanonical ensemble in the framework of AIT. As a result, we clarify the statistical mechanical meaning of the thermodynamic quantities of AIT.

  7. Modeling Instruction in AP Physics C: Mechanics and Electricity and Magnetism

    Science.gov (United States)

    Belcher, Nathan Tillman

    This action research study used data from multiple assessments in Mechanics and Electricity and Magnetism to determine the viability of Modeling Instruction as a pedagogy for students in AP Physics C: Mechanics and Electricity and Magnetism. Modeling Instruction is a guided-inquiry approach to teaching science in which students progress through the Modeling Cycle to develop a fully-constructed model for a scientific concept. AP Physics C: Mechanics and Electricity and Magnetism are calculus-based physics courses, approximately equivalent to first-year calculus-based physics courses at the collegiate level. Using a one-group pretest-posttest design, students were assessed in Mechanics using the Force Concept Inventory, Mechanics Baseline Test, and 2015 AP Physics C: Mechanics Practice Exam. With the same design, students were assessed in Electricity and Magnetism on the Brief Electricity and Magnetism Assessment, Electricity and Magnetism Conceptual Assessment, and 2015 AP Physics C: Electricity and Magnetism Practice Exam. In a one-shot case study design, student scores were collected from the 2017 AP Physics C: Mechanics and Electricity and Magnetism Exams. Students performed moderately well on the assessments in Mechanics and Electricity and Magnetism, demonstrating that Modeling Instruction is a viable pedagogy in AP Physics C: Electricity and Magnetism.

  8. The physics of quantum mechanics

    CERN Document Server

    Binney, James

    2014-01-01

    The Physics of Quantum Mechanics aims to give students a good understanding of how quantum mechanics describes the material world. It shows that the theory follows naturally from the use of probability amplitudes to derive probabilities. It stresses that stationary states are unphysical mathematical abstractions that enable us to solve the theory's governing equation, the time-dependent Schroedinger equation. Every opportunity is taken to illustrate the emergence of the familiarclassical, dynamical world through the quantum interference of stationary states. The text stresses the continuity be

  9. Identifying barriers to remaining physically active after rehabilitation: differences in perception between physical therapists and older adult patients.

    Science.gov (United States)

    Zalewski, Kathryn; Alt, Carlynn; Arvinen-Barrow, Monna

    2014-06-01

    Cross-sectional study. To describe readiness for change and barriers to physical activity in older adults and to contrast perceptions of physical therapists and patients using the Barriers to Being Active Quiz. Regular physical activity is vital to recovery after discharge from physical therapy. Physical therapists are positioned to support change in physical activity habits for those transitioning to home care. Understanding of readiness for change and barriers to physical activity could optimize recovery. Thirteen physical therapists enrolled in the study and invited patients who met the inclusion criteria to enroll (79 patients enrolled). The physical therapists provided the ICD-9 code, the physical therapist diagnosis, and completed the Barriers to Being Active Quiz as they perceived their patients would. The enrolled patients provided demographics and filled out the Satisfaction With Life Scale, the stages-of-change scale for physical activity, and the Barriers to Being Active Quiz. Patients were predominantly in the early stages of readiness for change. Both patients and physical therapists identified lack of willpower as the primary barrier to physical activity. Patients identified lack of willpower and social influence as critical barriers more often than physical therapists, whereas physical therapists identified fear of injury and lack of time more often than their patients did. Differences between physical therapists and their patients were noted for fear of injury (z = 2.66, P = .008) and lack of time (z = 3.46, P = .001). The stage of change for physical activity impacted perception of social influence (χ2 = 9.64, Pbarriers to physical activity may allow physical therapists to better tailor intervention strategies to impact physical activity behavior change.

  10. Inner-shell physics after fifty years of quantum mechanics

    International Nuclear Information System (INIS)

    Merzbacher, E.

    1976-01-01

    A historical view is given of how the development of quantum mechanics has been affected by the information relating to inner shells, gathered by physicists since the early days of atomic physics, and of the impact of quantum mechanics on the physics of inner atomic shells. 25 refs

  11. Theoretical physics IV. Quantum mechanics with problems in MAPLE

    International Nuclear Information System (INIS)

    Reinecker, Peter; Schulz, Michael; Schulz, Beatrix M.

    2008-01-01

    Quantum mechanics 2 is the fourth volume of the new and unique series for theoretical physics with Maple applications. This from basics newly concipated series mediates theoretical physics from contemporary view and in a way referring to a comprehensive lecture experience. Extensively and completely in five consecutively appearing volumes classical mechanics, electrodynamics, quantum mechanics 1 and 2, as well as statistical physics and thermodynamics are presented. Additionally for the elegant and extensive presentation on an each added CP applications for MAPLE trademark are contained, the software, which at more and more university is already applied in the lecture. They allow the experimenting with theory - and facilitate the understanding essentially. The present volume mediates extending, more complex contents of quantum mechanics, which are based on volume III of the series

  12. Quantum mechanics as total physical theory

    International Nuclear Information System (INIS)

    Slavnov, D.A.

    2002-01-01

    It is shown that the principles of the total physical theory and conclusions of the standard quantum mechanics are not at such an antagonistic variance as it is usually accepted. The axioms, which make it possible to plot the renewed mathematical scheme of the quantum mechanics are formulated within the frames of the algebraic approach. The above scheme includes the standard mathematical apparatus of the quantum mechanics. Simultaneously there exists the mathematical object, which adequately describes the individual experiment. The examples of applying the proposed scheme is presented [ru

  13. Introduction to physics mechanics, hydrodynamics thermodynamics

    CERN Document Server

    Frauenfelder, P

    2013-01-01

    Introduction of Physics: Mechanics , Hydrodynamics, Thermodynamics covers the principles of matter and its motion through space and time, as well as the related concepts of energy and force. This book is composed of eleven chapters, and begins with an introduction to the basic principles of mechanics, hydrodynamics, and thermodynamics. The subsequent chapters deal with the statics of rigid bodies and the dynamics of particles and rigid bodies. These topics are followed by discussions on elasticity, mechanics of fluids, the basic concept of thermodynamic, kinetic theory, and crystal structure o

  14. Physical mechanisms of Cu-Cu wafer bonding

    International Nuclear Information System (INIS)

    Rebhan, B.

    2014-01-01

    Modern manufacturing processes of complex integrated semiconductor devices are based on wafer-level manufacturing of components which are subsequently interconnected. When compared with classical monolithic bi-dimensional integrated circuits (2D ICs), the new approach of three-dimensional integrated circuits (3D ICs) exhibits significant benefits in terms of signal propagation delay and power consumption due to the reduced metal interconnection length and allows high integration levels with reduced form factor. Metal thermo-compression bonding is a process suitable for 3D interconnects applications at wafer level, which facilitates the electrical and mechanical connection of two wafers even processed in different technologies, such as complementary metal oxide semiconductor (CMOS) and microelectromechanical systems (MEMS). Due to its high electrical conductivity, copper is a very attractive material for electrical interconnects. For Cu-Cu wafer bonding the process requires typically bonding for around 1 h at 400°C and high contact pressure applied during bonding. Temperature reduction below such values is required in order to solve issues regarding (i) throughput in the wafer bonder, (ii) wafer-to-wafer misalignment after bonding and (iii) to minimise thermo-mechanical stresses or device degradation. The aim of this work was to study the physical mechanisms of Cu-Cu bonding and based on this study to further optimise the bonding process for low temperatures. The critical sample parameters (roughness, oxide, crystallinity) were identified using selected analytical techniques and correlated with the characteristics of the bonded Cu-Cu interfaces. Based on the results of this study the impact of several materials and process specifications on the bonding result were theoretically defined and experimentally proven. These fundamental findings subsequently facilitated low temperature (LT) metal thermo-compression Cu-Cu wafer bonding and even room temperature direct

  15. Baseball Physics: A New Mechanics Lab

    Science.gov (United States)

    Wagoner, Kasey; Flanagan, Daniel

    2018-05-01

    The game of baseball provides an interesting laboratory for experimenting with mechanical phenomena (there are many good examples in The Physics Teacher, available on Professor Alan Nathan's website, and discussed in Physics of Baseball & Softball). We have developed a lab, for an introductory-level physics course, that investigates many of these phenomena. The lab uses inexpensive, readily available equipment such as wooden baseball bats, baseballs, and actual Major League Baseball data. By the end of the lab, students have revisited many concepts they learned earlier in the semester and come away with an understanding of how to put seemingly disparate ideas together to analyze a fun sport.

  16. Swelling and mechanical properties of physically crosslinked poly(vinyl alcohol) hydrogels.

    Science.gov (United States)

    Suzuki, Atsushi; Sasaki, Saori

    2015-12-01

    Physically crosslinked poly(vinyl alcohol) gels are versatile biomaterials due to their excellent biocompatibility. In the past decades, physically crosslinked poly(vinyl alcohol) and poly(vinyl alcohol)-based hydrogels have been extensively studied for biomedical applications. However, these materials have not yet been implemented due to their mechanical strength. Physically crosslinked poly(vinyl alcohol) gels consist of a swollen amorphous network of poly(vinyl alcohol) physically crosslinked by microcrystallites. Although the mechanical properties can be improved to some extent by controlling the distribution of microcrystallites on the nano- and micro-scales, enhancing the mechanical properties while maintaining high water content remains very difficult. It may be technologically impossible to significantly improve the mechanical properties while keeping the gel's high water absorbance ability using conventional fabrication methods. Physical and chemical understandings of the swelling and mechanical properties of physically crosslinked poly(vinyl alcohol) gels are considered here; some promising strategies for their practical applications are presented. This review focuses more on the recent studies on swelling and mechanical properties of poly(vinyl alcohol) hydrogels, prepared using only poly(vinyl alcohol) and pure water with no other chemicals, as potential biomedical materials. © IMechE 2015.

  17. Quantum mechanical tunneling in chemical physics

    CERN Document Server

    Nakamura, Hiroki

    2016-01-01

    Quantum mechanical tunneling plays important roles in a wide range of natural sciences, from nuclear and solid-state physics to proton transfer and chemical reactions in chemistry and biology. Responding to the need for further understanding of multidimensional tunneling, the authors have recently developed practical methods that can be applied to multidimensional systems. Quantum Mechanical Tunneling in Chemical Physics presents basic theories, as well as original ones developed by the authors. It also provides methodologies and numerical applications to real molecular systems. The book offers information so readers can understand the basic concepts and dynamics of multidimensional tunneling phenomena and use the described methods for various molecular spectroscopy and chemical dynamics problems. The text focuses on three tunneling phenomena: (1) energy splitting, or tunneling splitting, in symmetric double well potential, (2) decay of metastable state through tunneling, and (3) tunneling effects in chemical...

  18. Neural mechanism of facilitation system during physical fatigue.

    Directory of Open Access Journals (Sweden)

    Masaaki Tanaka

    Full Text Available An enhanced facilitation system caused by motivational input plays an important role in supporting performance during physical fatigue. We tried to clarify the neural mechanisms of the facilitation system during physical fatigue using magnetoencephalography (MEG and a classical conditioning technique. Twelve right-handed volunteers participated in this study. Participants underwent MEG recording during the imagery of maximum grips of the right hand guided by metronome sounds for 10 min. Thereafter, fatigue-inducing maximum handgrip trials were performed for 10 min; the metronome sounds were started 5 min after the beginning of the handgrip trials. The metronome sounds were used as conditioned stimuli and maximum handgrip trials as unconditioned stimuli. The next day, they were randomly assigned to two groups in a single-blinded, two-crossover fashion to undergo two types of MEG recordings, that is, for the control and motivation sessions, during the imagery of maximum grips of the right hand guided by metronome sounds for 10 min. The alpha-band event-related desynchronizations (ERDs of the motivation session relative to the control session within the time windows of 500 to 700 and 800 to 900 ms after the onset of handgrip cue sounds were identified in the sensorimotor areas. In addition, the alpha-band ERD within the time window of 400 to 500 ms was identified in the right dorsolateral prefrontal cortex (Brodmann's area 46. The ERD level in the right dorsolateral prefrontal cortex was positively associated with that in the sensorimotor areas within the time window of 500 to 700 ms. These results suggest that the right dorsolateral prefrontal cortex is involved in the neural substrates of the facilitation system and activates the sensorimotor areas during physical fatigue.

  19. An Investigation of Adolescent Girls' Global Self-Concept, Physical Self-Concept, Identified Regulation, and Leisure-Time Physical Activity in Physical Education

    Science.gov (United States)

    Beasley, Emily Kristin; Garn, Alex C.

    2013-01-01

    This study examined the relationships among identified regulation, physical self-concept, global self-concept, and leisure-time physical activity with a sample of middle and high school girls (N = 319) enrolled in physical education. Based on Marsh's theory of self-concept, it was hypothesized that a) physical self-concept would mediate the…

  20. Mechanics of neurulation: From classical to current perspectives on the physical mechanics that shape, fold, and form the neural tube.

    Science.gov (United States)

    Vijayraghavan, Deepthi S; Davidson, Lance A

    2017-01-30

    Neural tube defects arise from mechanical failures in the process of neurulation. At the most fundamental level, formation of the neural tube relies on coordinated, complex tissue movements that mechanically transform the flat neural epithelium into a lumenized epithelial tube (Davidson, 2012). The nature of this mechanical transformation has mystified embryologists, geneticists, and clinicians for more than 100 years. Early embryologists pondered the physical mechanisms that guide this transformation. Detailed observations of cell and tissue movements as well as experimental embryological manipulations allowed researchers to generate and test elementary hypotheses of the intrinsic and extrinsic forces acting on the neural tissue. Current research has turned toward understanding the molecular mechanisms underlying neurulation. Genetic and molecular perturbation have identified a multitude of subcellular components that correlate with cell behaviors and tissue movements during neural tube formation. In this review, we focus on methods and conceptual frameworks that have been applied to the study of amphibian neurulation that can be used to determine how molecular and physical mechanisms are integrated and responsible for neurulation. We will describe how qualitative descriptions and quantitative measurements of strain, force generation, and tissue material properties as well as simulations can be used to understand how embryos use morphogenetic programs to drive neurulation. Birth Defects Research 109:153-168, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  1. Ad Hoc Physical Hilbert Spaces in Quantum Mechanics

    Czech Academy of Sciences Publication Activity Database

    Fernandez, F. M.; Garcia, J.; Semorádová, Iveta; Znojil, Miloslav

    2015-01-01

    Roč. 54, č. 12 (2015), s. 4187-4203 ISSN 0020-7748 Institutional support: RVO:61389005 Keywords : quantum mechanics * physical Hilbert spaces * ad hoc inner product * singular potentials regularized * low lying energies Subject RIV: BE - Theoretical Physics Impact factor: 1.041, year: 2015

  2. Identifying predictors of physics item difficulty: A linear regression approach

    Science.gov (United States)

    Mesic, Vanes; Muratovic, Hasnija

    2011-06-01

    Large-scale assessments of student achievement in physics are often approached with an intention to discriminate students based on the attained level of their physics competencies. Therefore, for purposes of test design, it is important that items display an acceptable discriminatory behavior. To that end, it is recommended to avoid extraordinary difficult and very easy items. Knowing the factors that influence physics item difficulty makes it possible to model the item difficulty even before the first pilot study is conducted. Thus, by identifying predictors of physics item difficulty, we can improve the test-design process. Furthermore, we get additional qualitative feedback regarding the basic aspects of student cognitive achievement in physics that are directly responsible for the obtained, quantitative test results. In this study, we conducted a secondary analysis of data that came from two large-scale assessments of student physics achievement at the end of compulsory education in Bosnia and Herzegovina. Foremost, we explored the concept of “physics competence” and performed a content analysis of 123 physics items that were included within the above-mentioned assessments. Thereafter, an item database was created. Items were described by variables which reflect some basic cognitive aspects of physics competence. For each of the assessments, Rasch item difficulties were calculated in separate analyses. In order to make the item difficulties from different assessments comparable, a virtual test equating procedure had to be implemented. Finally, a regression model of physics item difficulty was created. It has been shown that 61.2% of item difficulty variance can be explained by factors which reflect the automaticity, complexity, and modality of the knowledge structure that is relevant for generating the most probable correct solution, as well as by the divergence of required thinking and interference effects between intuitive and formal physics knowledge

  3. Identifying predictors of physics item difficulty: A linear regression approach

    Directory of Open Access Journals (Sweden)

    Hasnija Muratovic

    2011-06-01

    Full Text Available Large-scale assessments of student achievement in physics are often approached with an intention to discriminate students based on the attained level of their physics competencies. Therefore, for purposes of test design, it is important that items display an acceptable discriminatory behavior. To that end, it is recommended to avoid extraordinary difficult and very easy items. Knowing the factors that influence physics item difficulty makes it possible to model the item difficulty even before the first pilot study is conducted. Thus, by identifying predictors of physics item difficulty, we can improve the test-design process. Furthermore, we get additional qualitative feedback regarding the basic aspects of student cognitive achievement in physics that are directly responsible for the obtained, quantitative test results. In this study, we conducted a secondary analysis of data that came from two large-scale assessments of student physics achievement at the end of compulsory education in Bosnia and Herzegovina. Foremost, we explored the concept of “physics competence” and performed a content analysis of 123 physics items that were included within the above-mentioned assessments. Thereafter, an item database was created. Items were described by variables which reflect some basic cognitive aspects of physics competence. For each of the assessments, Rasch item difficulties were calculated in separate analyses. In order to make the item difficulties from different assessments comparable, a virtual test equating procedure had to be implemented. Finally, a regression model of physics item difficulty was created. It has been shown that 61.2% of item difficulty variance can be explained by factors which reflect the automaticity, complexity, and modality of the knowledge structure that is relevant for generating the most probable correct solution, as well as by the divergence of required thinking and interference effects between intuitive and formal

  4. Mathematica for Theoretical Physics Classical Mechanics and Nonlinear Dynamics

    CERN Document Server

    Baumann, Gerd

    2005-01-01

    Mathematica for Theoretical Physics: Classical Mechanics and Nonlinear Dynamics This second edition of Baumann's Mathematica® in Theoretical Physics shows readers how to solve physical problems and deal with their underlying theoretical concepts while using Mathematica® to derive numeric and symbolic solutions. Each example and calculation can be evaluated by the reader, and the reader can change the example calculations and adopt the given code to related or similar problems. The second edition has been completely revised and expanded into two volumes: The first volume covers classical mechanics and nonlinear dynamics. Both topics are the basis of a regular mechanics course. The second volume covers electrodynamics, quantum mechanics, relativity, and fractals and fractional calculus. New examples have been added and the representation has been reworked to provide a more interactive problem-solving presentation. This book can be used as a textbook or as a reference work, by students and researchers alike. A...

  5. Identifying the physical and anthropometric qualities explanatory of paddling adolescents.

    Science.gov (United States)

    Sinclair, Wade H; Leicht, Anthony S; Eady, Troy W; Marshall, Nick J; Woods, Carl T

    2017-12-01

    This study aimed to identify the physical and/or anthropometric qualities explanatory of adolescent surf lifesavers participating in paddling activities. Cross-sectional observational study. A total of 53 (14-18years) male participants were recruited and classified into two groups; paddlers (n=30; actively participating in paddling), non-paddlers (n=23; not actively participating in paddling). All participants completed a testing battery that consisted of 16 physical (isometric strength and muscular endurance) and anthropometric (height, mass, segment lengths and breadths) assessments. Binary logistic regression models and receiver operating characteristic curves were built to identify the physical and/or anthropometric qualities most explanatory of paddling status (two levels: 1=paddlers, 0=non-paddlers). Significant between group differences were noted for 14 of the 16 assessments (Ptalent detection programs focused toward the recognition of performance potential in paddling-oriented sports. Copyright © 2017 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  6. Head First Physics A learner's companion to mechanics and practical physics (AP Physics B - Advanced Placement)

    CERN Document Server

    Lang, Heather

    2008-01-01

    Wouldn't it be great if there were a physics book that showed you how things work instead of telling you how? Finally, with Head First Physics, there is. This comprehensive book takes the stress out of learning mechanics and practical physics by providing a fun and engaging experience, especially for students who "just don't get it." Head First Physics offers a format that's rich in visuals and full of activities, including pictures, illustrations, puzzles, stories, and quizzes -- a mixed-media style proven to stimulate learning and retention. One look will convince you: This isn't mere theo

  7. Study on Mechanical and Physical Behaviour of Hybrid GFRP

    Directory of Open Access Journals (Sweden)

    Nor Bahiyah Baba

    2015-01-01

    Full Text Available The paper discusses the mechanical and physical behaviour of hybrid glass fibre reinforced plastic (GFRP. Hybrid GFRP was fabricated by three different types of glass fibre, namely, 3D, woven, and chopped, which were selected and combined with mixture of polyester resin and hardener. The hybrid GFRP was investigated by varying three parameters which were the composite volume fractions, hybrid GFRP arrangement, and single type fibre. The hybrid GFRP was fabricated by using open mould hand lay-up technique. Mechanical testing was conducted by tensile test for strength and stiffness whereas physical testing was performed using water absorption and hardness. These tests were carried out to determine the effect of mechanical and physical behaviour over the hybrid GFRP. The highest volume fraction of 0.5 gives the highest strength and stiffness of 73 MPa and 821 MPa, respectively. Varying hybrid fibre arrangement which is the arrangement of chopped-woven-3D-woven-chopped showed the best value in strength of 66.2 MPa. The stiffness is best at arrangement of woven-chopped-woven-chopped-woven at 690 MPa. This arrangement also showed the lowest water absorption of 4.5%. Comparing the single fibre type, woven had overtaken the others in terms of both mechanical and physical properties.

  8. Middle school students' learning of mechanics concepts through engagement in different sequences of physical and virtual experiments

    Science.gov (United States)

    Sullivan, Sarah; Gnesdilow, Dana; Puntambekar, Sadhana; Kim, Jee-Seon

    2017-08-01

    Physical and virtual experimentation are thought to have different affordances for supporting students' learning. Research investigating the use of physical and virtual experiments to support students' learning has identified a variety of, sometimes conflicting, outcomes. Unanswered questions remain about how physical and virtual experiments may impact students' learning and for which contexts and content areas they may be most effective. Using a quasi-experimental design, we examined eighth grade students' (N = 100) learning of physics concepts related to pulleys depending on the sequence of physical and virtual labs they engaged in. Five classes of students were assigned to either the: physical first condition (PF) (n = 55), where students performed a physical pulley experiment and then performed the same experiment virtually, or virtual first condition (VF) (n = 45), with the opposite sequence. Repeated measures ANOVA's were conducted to examine how physical and virtual labs impacted students' learning of specific physics concepts. While we did not find clear-cut support that one sequence was better, we did find evidence that participating in virtual experiments may be more beneficial for learning certain physics concepts, such as work and mechanical advantage. Our findings support the idea that if time or physical materials are limited, using virtual experiments may help students understand work and mechanical advantage.

  9. A prediction model to identify hospitalised, older adults with reduced physical performance

    DEFF Research Database (Denmark)

    Bruun, Inge H; Maribo, Thomas; Nørgaard, Birgitte

    2017-01-01

    of discharge, health systems could offer these patients additional therapy to maintain or improve health and prevent institutionalisation or readmission. The principle aim of this study was to identify predictors for persisting, reduced physical performance in older adults following acute hospitalisation......BACKGROUND: Identifying older adults with reduced physical performance at the time of hospital admission can significantly affect patient management and trajectory. For example, such patients could receive targeted hospital interventions such as routine mobilisation. Furthermore, at the time...... admission, falls, physical activity level, self-rated health, use of a walking aid before admission, number of prescribed medications, 30s-CST, and the De Morton Mobility Index. RESULTS: A total of 78 (67%) patients improved in physical performance in the interval between admission and follow-up assessment...

  10. Vanadium alloys for structural applications in fusion systems: A review of vanadium alloy mechanical and physical properties

    Energy Technology Data Exchange (ETDEWEB)

    Loomis, B.A.; Smith, D.L.

    1991-12-16

    The current knowledge is reviewed on (1) the effects of neutron irradiation on tensile strength and ductility, ductile-brittle transition temperature, creep, fatigue, and swelling of vanadium-base alloys, (2) the compatibility of vanadium-base alloys with liquid lithium, water, and helium environments, and (3) the effects of hydrogen and helium on the physical and mechanical properties of vanadium alloys that are potential candidates for structural materials applications in fusion systems. Also, physical and mechanical properties issues are identified that have not been adequately investigated in order to qualify a vanadium-base alloy for the structural material in experimental fusion devices and/or in fusion reactors.

  11. Vanadium alloys for structural applications in fusion systems: A review of vanadium alloy mechanical and physical properties

    International Nuclear Information System (INIS)

    Loomis, B.A.; Smith, D.L.

    1991-01-01

    The current knowledge is reviewed on (1) the effects of neutron irradiation on tensile strength and ductility, ductile-brittle transition temperature, creep, fatigue, and swelling of vanadium-base alloys, (2) the compatibility of vanadium-base alloys with liquid lithium, water, and helium environments, and (3) the effects of hydrogen and helium on the physical and mechanical properties of vanadium alloys that are potential candidates for structural materials applications in fusion systems. Also, physical and mechanical properties issues are identified that have not been adequately investigated in order to qualify a vanadium-base alloy for the structural material in experimental fusion devices and/or in fusion reactors

  12. Mechanisms of action in mindfulness-based cognitive therapy (MBCT) and mindfulness-based stress reduction (MBSR) in people with physical and/or psychological conditions: A systematic review.

    Science.gov (United States)

    Alsubaie, Modi; Abbott, Rebecca; Dunn, Barnaby; Dickens, Chris; Keil, Tina Frieda; Henley, William; Kuyken, Willem

    2017-07-01

    Recently, there has been an increased interest in studying the effects of mindfulness-based interventions for people with psychological and physical problems. However, the mechanisms of action in these interventions that lead to beneficial physical and psychological outcomes have yet to be clearly identified. The aim of this paper is to review, systematically, the evidence to date on the mechanisms of action in mindfulness interventions in populations with physical and/or psychological conditions. Searches of seven databases (PsycINFO, Medline (Ovid), Cochrane Central Register of Controlled Trials, EMBASE, CINAHL, AMED, ClinicalTrials.gov) were undertaken in June 2014 and July 2015. We evaluated to what extent the studies we identified met the criteria suggested by Kazdin for establishing mechanisms of action within a psychological treatment (2007, 2009). We identified four trials examining mechanisms of mindfulness interventions in those with comorbid psychological and physical health problems and 14 in those with psychological conditions. These studies examined a diverse range of potential mechanisms, including mindfulness and rumination. Of these candidate mechanisms, the most consistent finding was that greater self-reported change in mindfulness mediated superior clinical outcomes. However, very few studies fully met the Kazdin criteria for examining treatment mechanisms. There was evidence that global changes in mindfulness are linked to better outcomes. This evidence pertained more to interventions targeting psychological rather than physical health conditions. While there is promising evidence that MBCT/MBSR intervention effects are mediated by hypothesised mechanisms, there is a lack of methodological rigour in the field of testing mechanisms of action for both MBCT and MBSR, which precludes definitive conclusions. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Project Physics Text 3, The Triumph of Mechanics.

    Science.gov (United States)

    Harvard Univ., Cambridge, MA. Harvard Project Physics.

    Mechanical theories are presented in this unit of the Project Physics text for senior high students. Collisions, Newton's laws, isolated systems, and Leibniz' concept are discussed, leading to conservation of mass and momentum. Energy conservation is analyzed in terms of mechanical energy, heat energy, steam engines, Watt's engine, Joule's…

  14. Physical and mechanical properties of gamma radiation cross-linked polyethylene

    International Nuclear Information System (INIS)

    Gonzalez, Maria E.; Romero, G.; Smolko, Eduardo E.

    1999-01-01

    Granulated LDPE 2003 polyethylene was extruded and irradiated under nitrogen with 150, 200 and 300 kGy gamma rays doses to produce cross-linking. The study of the physical and mechanical properties shows that the product has a high degree of molecular cross-linking, can be heated up to 200 C for 2 hours without deformation and that the mechanical properties improve. Preliminary aging tests indicate that after heating at 60 C for 4 weeks no physical or mechanical deterioration can be observed. (author)

  15. Principles of physics from quantum field theory to classical mechanics

    CERN Document Server

    Jun, Ni

    2014-01-01

    This book starts from a set of common basic principles to establish the formalisms in all areas of fundamental physics, including quantum field theory, quantum mechanics, statistical mechanics, thermodynamics, general relativity, electromagnetic field, and classical mechanics. Instead of the traditional pedagogic way, the author arranges the subjects and formalisms in a logical-sequential way, i.e. all the formulas are derived from the formulas before them. The formalisms are also kept self-contained. Most of the required mathematical tools are also given in the appendices. Although this book covers all the disciplines of fundamental physics, the book is concise and can be treated as an integrated entity. This is consistent with the aphorism that simplicity is beauty, unification is beauty, and thus physics is beauty. The book may be used as an advanced textbook by graduate students. It is also suitable for physicists who wish to have an overview of fundamental physics. Readership: This is an advanced gradua...

  16. Effects of gamma rays on the physical and mechanical properties of hide

    International Nuclear Information System (INIS)

    Sutrisno Puspodikoro.

    1976-01-01

    The effect of gamma rays on the physical and mechanical properties of hide has been studied, using Gammacell 220 as an irradiator. The determination of the physical and mechanical properties of the irradiated hide was carried out by Balai Penelitian Kulit (Leather Research Institute) at Yogyakarta. Experiments show that up to a certain dose of irradiation, favourable effects can be obtained, while higher doses impair the physical and mechanical properties of the leather raw materials. (author)

  17. A review of the chemical and physical mechanisms of the storage stability of fast pyrolysis bio-oils

    Energy Technology Data Exchange (ETDEWEB)

    Diebold, J.P.

    1999-01-27

    Understanding the fundamental chemical and physical aging mechanisms is necessary to learn how to produce a bio-oil that is more stable during shipping and storage. This review provides a basis for this understanding and identifies possible future research paths to produce bio-oils with better storage stability.

  18. The scientifiv way of thinking in statistics, statistical physics and quantum mechanics

    OpenAIRE

    Săvoiu, Gheorghe

    2008-01-01

    This paper focuses on the way of thinking in both classical and modern Physics and Statistics, Statistical Mechanics or Statistical Physics and Quantum Mechanics. These different statistical ways of thinking and their specific methods have generated new fields for new activities and new scientific disciplines, like Econophysics (between Economics and Physics), Sociophysics (between Sociology and Physics), Mediaphysics (between all media and comunication sciences), etc. After describing some r...

  19. The scientific way of thinking in statistics, statistical physics and quantum mechanics

    OpenAIRE

    Săvoiu, Gheorghe

    2008-01-01

    This paper focuses on the way of thinking in both classical and modern Physics and Statistics, Statistical Mechanics or Statistical Physics and Quantum Mechanics. These different statistical ways of thinking and their specific methods have generated new fields for new activities and new scientific disciplines, like Econophysics (between Economics and Physics), Sociophysics (between Sociology and Physics), Mediaphysics (between all media and comunication sciences), etc. After describing some r...

  20. 2016 International Conference on Physics and Mechanics of New Materials and Their Applications

    CERN Document Server

    Chang, Shun-Hsyung; Jani, Muaffaq

    2017-01-01

    This book presents 50 selected peer-reviewed reports from the 2016 International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2016 (Surabaya, Indonesia, 19–22 July, 2016). The Proceedings are devoted to processing techniques, physics, mechanics, and applications of advanced materials. As such, they examine a wide spectrum of nanostructures, ferroelectric crystals, materials and composites, as well as other promising materials with special properties. They present nanotechnology approaches, modern environmentally friendly piezoelectric and ferromagnetic techniques, and physical and mechanical studies of the structural and physical-mechanical properties of the materials discussed.  Further, a broad range of original mathematical and numerical methods is applied to solve various technological, mechanical and physical problems, which are inte resting for applications. Great attention is devoted to novel devices with high accuracy, longevity and extended possibilitie...

  1. The Cytoskeleton: Mechanical, Physical, and Biological Interactions

    Science.gov (United States)

    1996-01-01

    This workshop, entitled "The Cytoskeleton: Mechanical, Physical, and Biological Interactions," was sponsored by the Center for Advanced Studies in the Space Life Sciences at the Marine Biological Laboratory. This Center was established through a cooperative agreement between the MBL and the Life Sciences Division of the National Aeronautics and Space Administration. To achieve these goals, the Center sponsors a series of workshops on various topics in the life sciences. Elements of the cytoskeleton have been implicated in the effects of gravity on the growth of plants fungi. An intriguing finding in this regard is the report indicating that an integrin-like protein may be the gravireceptor in the internodal cells of Chara. Involvement of the cytoskeleton in cellular graviperception of the basidiomycete Flammulina velutipes has also been reported. Although the responses of mammalian cells to gravity are not well documented, it has been proposed that integrins can act as mechanochemical transducers in mammalian cells. Little is known about the integrated mechanical and physical properties of cytoplasm, this workshop would be the best place to begin developing interdisciplinary approaches to the effects of mechanical stresses on cells and their most likely responsive cytoplasmic elements- the fibrous proteins comprising the cytoskeleton.

  2. Replacement of quartz in cementitious composites using PET particles:A statistical analysis of the physical and mechanical properties

    OpenAIRE

    Detomi, Anine Cristina; Filho, Sergio Luiz Moni Ribeiro; Panzera, Túlio H C; Schiavon, Marco Antonio; Silva, Vania R V; Scarpa, Fabrizio

    2016-01-01

    This work investigates the mechanical behavior of cementitious composites (mortar) when quartz inclusions are totally or partially replaced with polyethylene terephthalate (PET) particles. A full factorial design is performed to identify the effect of the water/cement ratio and the range of quartz particles size used in the replacement on the different mechanical and physical parameters (bulk density, apparent porosity, water absorption, oxygen permeability, compressive strength, and modulus ...

  3. Calculations in fundamental physics mechanics and heat

    CERN Document Server

    Heddle, T

    2013-01-01

    Calculations in Fundamental Physics, Volume I: Mechanics and Heat focuses on the mechanisms of heat. The manuscript first discusses motion, including parabolic, angular, and rectilinear motions, relative velocity, acceleration of gravity, and non-uniform acceleration. The book then discusses combinations of forces, such as polygons and resolution, friction, center of gravity, shearing force, and bending moment. The text looks at force and acceleration, energy and power, and machines. Considerations include momentum, horizontal or vertical motion, work and energy, pulley systems, gears and chai

  4. Fluctuations of physical values in statistical mechanics

    International Nuclear Information System (INIS)

    Zaripov, R.G.

    1999-01-01

    The new matrix inequalities for the boundary of measurement accuracy of physical values in the ensemble of quantum systems were obtained. The multidimensional thermodynamical parameter measurement is estimated. The matrix inequalities obtained are quantum analogs of the Cramer-Rao information inequalities in mathematical statistics. The quantity of information in quantum mechanical measurement, connected with the boundaries of jointly measurable values in one macroscopic experiment was determined. The lower boundary of the variance of estimation of multidimensional quantum mechanical parameter was found. (author)

  5. Video-based problems in introductory mechanics physics courses

    International Nuclear Information System (INIS)

    Gröber, Sebastian; Klein, Pascal; Kuhn, Jochen

    2014-01-01

    Introductory mechanics physics courses at the transition from school to university are a challenge for students. They are faced with an abrupt and necessary increase of theoretical content and requirements on their conceptual understanding of phyiscs. In order to support this transition we replaced part of the mandatory weekly theory-based paper-and-pencil problems with video analysis problems of equal content and level of difficulty. Video-based problems (VBP) are a new problem format for teaching physics from a linked sequence of theoretical and video-based experimental tasks. Experimental tasks are related to the well-known concept of video motion analysis. This introduction of an experimental part in recitations allows the establishment of theory–experiment interplay as well as connections between physical content and context fields such as nature, technique, everyday life and applied physics by conducting model-and context-related experiments. Furthermore, laws and formulas as predominantly representative forms are extended by the use of diagrams and vectors. In this paper we give general reasons for this approach, describe the structure and added values of VBP, and show that they cover a relevant part of mechanics courses at university. Emphasis is put on theory–experiment interplay as a structural added value of VBP to promote students' construction of knowledge and conceptual understanding. (paper)

  6. Theoretical Physics 1. Theoretical Mechanics

    International Nuclear Information System (INIS)

    Dreizler, Reiner M.; Luedde, Cora S.

    2010-01-01

    After an introduction to basic concepts of mechanics more advanced topics build the major part of this book. Interspersed is a discussion of selected problems of motion. This is followed by a concise treatment of the Lagrangian and the Hamiltonian formulation of mechanics, as well as a brief excursion on chaotic motion. The last chapter deals with applications of the Lagrangian formulation to specific systems (coupled oscillators, rotating coordinate systems, rigid bodies). The level of this textbook is advanced undergraduate. The authors combine teaching experience of more than 40 years in all fields of Theoretical Physics and related mathematical disciplines and thorough knowledge in creating advanced eLearning content. The text is accompanied by an extensive collection of online material, in which the possibilities of the electronic medium are fully exploited, e.g. in the form of applets, 2D- and 3D-animations. (orig.)

  7. Theoretical Physics 1. Theoretical Mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Dreizler, Reiner M.; Luedde, Cora S. [Frankfurt Univ. (Germany). Inst. fuer Theoretische Physik

    2010-07-01

    After an introduction to basic concepts of mechanics more advanced topics build the major part of this book. Interspersed is a discussion of selected problems of motion. This is followed by a concise treatment of the Lagrangian and the Hamiltonian formulation of mechanics, as well as a brief excursion on chaotic motion. The last chapter deals with applications of the Lagrangian formulation to specific systems (coupled oscillators, rotating coordinate systems, rigid bodies). The level of this textbook is advanced undergraduate. The authors combine teaching experience of more than 40 years in all fields of Theoretical Physics and related mathematical disciplines and thorough knowledge in creating advanced eLearning content. The text is accompanied by an extensive collection of online material, in which the possibilities of the electronic medium are fully exploited, e.g. in the form of applets, 2D- and 3D-animations. (orig.)

  8. Representative volume size: A comparison of statistical continuum mechanics and statistical physics

    Energy Technology Data Exchange (ETDEWEB)

    AIDUN,JOHN B.; TRUCANO,TIMOTHY G.; LO,CHI S.; FYE,RICHARD M.

    1999-05-01

    In this combination background and position paper, the authors argue that careful work is needed to develop accurate methods for relating the results of fine-scale numerical simulations of material processes to meaningful values of macroscopic properties for use in constitutive models suitable for finite element solid mechanics simulations. To provide a definite context for this discussion, the problem is couched in terms of the lack of general objective criteria for identifying the size of the representative volume (RV) of a material. The objective of this report is to lay out at least the beginnings of an approach for applying results and methods from statistical physics to develop concepts and tools necessary for determining the RV size, as well as alternatives to RV volume-averaging for situations in which the RV is unmanageably large. The background necessary to understand the pertinent issues and statistical physics concepts is presented.

  9. Identifying Facilitators and Barriers to Physical Activity for Adults with Down Syndrome

    Science.gov (United States)

    Mahy, J.; Shields, N.; Taylor, N. F.; Dodd, K. J.

    2010-01-01

    Background: Adults with Down syndrome are typically sedentary, and many do not participate in the recommended levels of physical activity per week. The aim of this study was to identify the facilitators and barriers to physical activity for this group. Method: Semi-structured interviews were conducted to elicit the views of adults with Down…

  10. Theoretical Mechanics Theoretical Physics 1

    CERN Document Server

    Dreizler, Reiner M

    2011-01-01

    After an introduction to basic concepts of mechanics more advanced topics build the major part of this book. Interspersed is a discussion of selected problems of motion. This is followed by a concise treatment of the Lagrangian and the Hamiltonian formulation of mechanics, as well as a brief excursion on chaotic motion. The last chapter deals with applications of the Lagrangian formulation to specific systems (coupled oscillators, rotating coordinate systems, rigid bodies). The level of this textbook is advanced undergraduate. The authors combine teaching experience of more than 40 years in all fields of Theoretical Physics and related mathematical disciplines and thorough knowledge in creating advanced eLearning content. The text is accompanied by an extensive collection of online material, in which the possibilities of the electronic medium are fully exploited, e.g. in the form of applets, 2D- and 3D-animations. - A collection of 74 problems with detailed step-by-step guidance towards the solutions. - A col...

  11. Physical mechanisms of biological molecular motors

    International Nuclear Information System (INIS)

    Miller, John H. Jr.; Vajrala, Vijayanand; Infante, Hans L.; Claycomb, James R.; Palanisami, Akilan; Fang Jie; Mercier, George T.

    2009-01-01

    Biological motors generally fall into two categories: (1) those that convert chemical into mechanical energy via hydrolysis of a nucleoside triphosphate, usually adenosine triphosphate, regarded as life's chemical currency of energy and (2) membrane bound motors driven directly by an ion gradient and/or membrane potential. Here we argue that electrostatic interactions play a vital role for both types of motors and, therefore, the tools of physics can greatly contribute to understanding biological motors

  12. Physical aspects of pseudo-Hermitian and PT-symmetric quantum mechanics

    International Nuclear Information System (INIS)

    Mostafazadeh, Ali; Batal, Ahmet

    2004-01-01

    For a non-Hermitian Hamiltonian H possessing a real spectrum, we introduce a canonical orthonormal basis in which a previously introduced unitary mapping of H to a Hermitian Hamiltonian h takes a simple form. We use this basis to construct the observables O α of the quantum mechanics based on H. In particular, we introduce pseudo-Hermitian position and momentum operators and a pseudo-Hermitian quantization scheme that relates the latter to the ordinary classical position and momentum observables. These allow us to address the problem of determining the conserved probability density and the underlying classical system for pseudo-Hermitian and in particular PT-symmetric quantum systems. As a concrete example we construct the Hermitian Hamiltonian h, the physical observables O α , the localized states and the conserved probability density for the non-Hermitian PT-symmetric square well. We achieve this by employing an appropriate perturbation scheme. For this system, we conduct a comprehensive study of both the kinematical and dynamical effects of the non-Hermiticity of the Hamiltonian on various physical quantities. In particular, we show that these effects are quantum mechanical in nature and diminish in the classical limit. Our results provide an objective assessment of the physical aspects of PT-symmetric quantum mechanics and clarify its relationship with both conventional quantum mechanics and classical mechanics

  13. The Quantum Mechanics Solver How to Apply Quantum Theory to Modern Physics

    CERN Document Server

    Basdevant, Jean-Louis

    2006-01-01

    The Quantum Mechanics Solver grew from topics which are part of the final examination in quantum theory at the Ecole Polytechnique at Palaiseau near Paris, France. The aim of the text is to guide the student towards applying quantum mechanics to research problems in fields such as atomic and molecular physics, condensed matter physics, and laser physics. Advanced undergraduates and graduate students will find a rich and challenging source for improving their skills in this field.

  14. The quantum mechanics solver. How to apply quantum theory to modern physics. 2. ed.

    International Nuclear Information System (INIS)

    Basdevant, J.L.; Dalibard, J.

    2006-01-01

    The Quantum Mechanics Solver uniquely illustrates the application of quantum mechanical concepts to various fields of modern physics. It aims at encouraging the reader to apply quantum mechanics to research problems in fields such as molecular physics, condensed matter physics or laser physics. Advanced undergraduates and graduate students will find a rich and challenging source of material for further exploration. This book consists of a series of problems concerning present-day experimental or theoretical questions on quantum mechanics. All of these problems are based on actual physical examples, even if sometimes the mathematical structure of the models under consideration is simplified intentionally in order to get hold of the physics more rapidly. The new edition features new themes, such as the progress in measuring neutrino oscillations, quantum boxes, the quantum thermometer etc. Secondly, it includes a brief summary on the basics of quantum mechanics and the formalism we use. Finally, the problems under three main themes: Elementary Particles, Nuclei and Atoms; Quantum Entanglement and Measurement; and Complex Systems. (orig.)

  15. Physical mechanisms of biological molecular motors

    Energy Technology Data Exchange (ETDEWEB)

    Miller, John H. Jr. [Department of Physics and Texas Center for Superconductivity, University of Houston, 4800 Calhoun Road, Ste. 617 SR1 Houston, TX 77204-5005 (United States)], E-mail: jhmiller@uh.edu; Vajrala, Vijayanand; Infante, Hans L. [Department of Physics and Texas Center for Superconductivity, University of Houston, 4800 Calhoun Road, Ste. 617 SR1 Houston, TX 77204-5005 (United States); Claycomb, James R. [Department of Physics and Texas Center for Superconductivity, University of Houston, 4800 Calhoun Road, Ste. 617 SR1 Houston, TX 77204-5005 (United States); Department of Mathematics and Physics, Houston Baptist University, 7502 Fondren Road, Houston, TX 77074-3298 (United States); Palanisami, Akilan; Fang Jie; Mercier, George T. [Department of Physics and Texas Center for Superconductivity, University of Houston, 4800 Calhoun Road, Ste. 617 SR1 Houston, TX 77204-5005 (United States)

    2009-03-01

    Biological motors generally fall into two categories: (1) those that convert chemical into mechanical energy via hydrolysis of a nucleoside triphosphate, usually adenosine triphosphate, regarded as life's chemical currency of energy and (2) membrane bound motors driven directly by an ion gradient and/or membrane potential. Here we argue that electrostatic interactions play a vital role for both types of motors and, therefore, the tools of physics can greatly contribute to understanding biological motors.

  16. Quantum mechanics and the physical reality concept

    International Nuclear Information System (INIS)

    von Borzeszkowski, H.H.; Wahsner, R.

    1988-01-01

    The difference between the measurement bases of classical and quantum mechanics is often interpreted as a loss of reality arising in quantum mechanics. In this paper it is shown that this apparent loss occurs only if one believes that refined everyday experience determines the Euclidean space as the real space, instead of considering this space, both in classical and quantum mechanics, as a theoretical construction needed for measurement and representing one part of a dualistic space conception. From this point of view, Einstein's program of a unified field theory can be interpreted as the attempt to find a physical theory that is less dualistic. However, if one regards this dualism as resulting from the requirements of measurements, one can hope for a weakening of the dualism but not expect to remove it completely

  17. Ultrasonic evaluation of the physical and mechanical properties of granites.

    Science.gov (United States)

    Vasconcelos, G; Lourenço, P B; Alves, C A S; Pamplona, J

    2008-09-01

    Masonry is the oldest building material that survived until today, being used all over the world and being present in the most impressive historical structures as an evidence of spirit of enterprise of ancient cultures. Conservation, rehabilitation and strengthening of the built heritage and protection of human lives are clear demands of modern societies. In this process, the use of nondestructive methods has become much common in the diagnosis of structural integrity of masonry elements. With respect to the evaluation of the stone condition, the ultrasonic pulse velocity is a simple and economical tool. Thus, the central issue of the present paper concerns the evaluation of the suitability of the ultrasonic pulse velocity method for describing the mechanical and physical properties of granites (range size between 0.1-4.0 mm and 0.3-16.5 mm) and for the assessment of its weathering state. The mechanical properties encompass the compressive and tensile strength and modulus of elasticity, and the physical properties include the density and porosity. For this purpose, measurements of the longitudinal ultrasonic pulse velocity with distinct natural frequency of the transducers were carried out on specimens with different size and shape. A discussion of the factors that induce variations on the ultrasonic velocity is also provided. Additionally, statistical correlations between ultrasonic pulse velocity and mechanical and physical properties of granites are presented and discussed. The major output of the work is the confirmation that ultrasonic pulse velocity can be effectively used as a simple and economical nondestructive method for a preliminary prediction of mechanical and physical properties, as well as a tool for the assessment of the weathering changes of granites that occur during the serviceable life. This is of much interest due to the usual difficulties in removing specimens for mechanical characterization.

  18. 2015 International Conference on Physics and Mechanics of New Materials and their Applications

    CERN Document Server

    Chang, Shun-Hsyung; Topolov, Vitaly

    2016-01-01

    This proceedings volume presents selected and peer reviewed 50 reports of the 2015 International Conference on “Physics and Mechanics of New Materials and Their Applications” (Azov, Russia, 19-22 May, 2015), devoted to 100th Anniversary of the Southern Federal University, Russia. The book presents processing techniques, physics, mechanics, and applications of advanced materials. The book is concentrated on some nanostructures, ferroelectric crystals, materials and composites and other materials with specific properties. In this book are presented nanotechnology approaches, modern piezoelectric techniques, physical and mechanical studies of the structure-sensitive properties of the materials. A wide spectrum of mathematical and numerical methods is applied to the solution of different technological, mechanical and physical problems for applications. Great attention is devoted to novel devices with high accuracy, longevity and extended possibilities to work in a large scale of  temperatures and pressure r...

  19. Fundamentals of physics II electromagnetism, optics, and quantum mechanics

    CERN Document Server

    Shankar, R

    2016-01-01

    R. Shankar, a well-known physicist and contagiously enthusiastic educator, was among the first to offer a course through the innovative Open Yale Course program. His popular online video lectures on introductory physics have been viewed over a million times. In this second book based on his online Yale course, Shankar explains essential concepts, including electromagnetism, optics, and quantum mechanics. The book begins at the simplest level, develops the basics, and reinforces fundamentals, ensuring a solid foundation in the principles and methods of physics. It provides an ideal introduction for college-level students of physics, chemistry, and engineering; for motivated AP Physics students; and for general readers interested in advances in the sciences.

  20. Mathematica® for Theoretical Physics Electrodynamics, Quantum Mechanics, General Relativity and Fractals

    CERN Document Server

    Baumann, Gerd

    2005-01-01

    Mathematica for Theoretical Physics: Electrodynamics, Quantum Mechanics, General Relativity, and Fractals This second edition of Baumann's Mathematica® in Theoretical Physics shows readers how to solve physical problems and deal with their underlying theoretical concepts while using Mathematica® to derive numeric and symbolic solutions. Each example and calculation can be evaluated by the reader, and the reader can change the example calculations and adopt the given code to related or similar problems. The second edition has been completely revised and expanded into two volumes: The first volume covers classical mechanics and nonlinear dynamics. Both topics are the basis of a regular mechanics course. The second volume covers electrodynamics, quantum mechanics, relativity, and fractals and fractional calculus. New examples have been added and the representation has been reworked to provide a more interactive problem-solving presentation. This book can be used as a textbook or as a reference work, by student...

  1. Biological mechanisms underlying the role of physical fitness in health and resilience

    OpenAIRE

    Silverman, Marni N.; Deuster, Patricia A.

    2014-01-01

    Physical fitness, achieved through regular exercise and/or spontaneous physical activity, confers resilience by inducing positive psychological and physiological benefits, blunting stress reactivity, protecting against potentially adverse behavioural and metabolic consequences of stressful events and preventing many chronic diseases. In this review, we discuss the biological mechanisms underlying the beneficial effects of physical fitness on mental and physical health. Physical fitness appear...

  2. Theoretical physics 7 quantum mechanics : methods and applications

    CERN Document Server

    Nolting, Wolfgang

    2017-01-01

    This textbook offers a clear and comprehensive introduction to methods and applications in quantum mechanics, one of the core components of undergraduate physics courses. It follows on naturally from the previous volumes in this series, thus developing the understanding of quantized states further on. The first part of the book introduces the quantum theory of angular momentum and approximation methods. More complex themes are covered in the second part of the book, which describes multiple particle systems and scattering theory. Ideally suited to undergraduate students with some grounding in the basics of quantum mechanics, the book is enhanced throughout with learning features such as boxed inserts and chapter summaries, with key mathematical derivations highlighted to aid understanding. The text is supported by numerous worked examples and end of chapter problem sets.  About the Theoretical Physics series Translated from the renowned and highly successful German editions, the eight volumes of this seri...

  3. Novel instrument for characterizing comprehensive physical properties under multi-mechanical loads and multi-physical field coupling conditions

    Science.gov (United States)

    Liu, Changyi; Zhao, Hongwei; Ma, Zhichao; Qiao, Yuansen; Hong, Kun; Ren, Zhuang; Zhang, Jianhai; Pei, Yongmao; Ren, Luquan

    2018-02-01

    Functional materials represented by ferromagnetics and ferroelectrics are widely used in advanced sensor and precision actuation due to their special characterization under coupling interactions of complex loads and external physical fields. However, the conventional devices for material characterization can only provide a limited type of loads and physical fields and cannot simulate the actual service conditions of materials. A multi-field coupling instrument for characterization has been designed and implemented to overcome this barrier and measure the comprehensive physical properties under complex service conditions. The testing forms include tension, compression, bending, torsion, and fatigue in mechanical loads, as well as different external physical fields, including electric, magnetic, and thermal fields. In order to offer a variety of information to reveal mechanical damage or deformation forms, a series of measurement methods at the microscale are integrated with the instrument including an indentation unit and in situ microimaging module. Finally, several coupling experiments which cover all the loading and measurement functions of the instrument have been implemented. The results illustrate the functions and characteristics of the instrument and then reveal the variety in mechanical and electromagnetic properties of the piezoelectric transducer ceramic, TbDyFe alloy, and carbon fiber reinforced polymer under coupling conditions.

  4. Identifying patient fear-avoidance beliefs by physical therapists managing patients with low back pain.

    Science.gov (United States)

    Calley, Darren Q; Jackson, Steven; Collins, Heather; George, Steven Z

    2010-12-01

    Cross-sectional. To evaluate the accuracy with which physical therapists identify fear-avoidance beliefs in patients with low back pain by comparing therapist ratings of perceived patient fear-avoidance to the Fear-Avoidance Beliefs Questionnaire (FABQ), Tampa Scale of Kinesiophobia 11-item (TSK-11), and Pain Catastrophizing Scale (PCS). To compare the concurrent validity of therapist ratings of perceived patient fear-avoidance and a 2-item questionnaire on fear of physical activity and harm, with clinical measures of fear-avoidance (FABQ, TSK-11, PCS), pain intensity as assessed with a numeric pain rating scale (NPRS), and disability as assessed with the Oswestry Disability Questionnaire (ODQ). The need to consider psychosocial factors for identifying patients at risk for disability and chronic low back pain has been well documented. Yet the ability of physical therapists to identify fear-avoidance beliefs using direct observation has not been studied. Eight physical therapists and 80 patients with low back pain from 3 physical therapy clinics participated in the study. Patients completed the FABQ, TSK-11, PCS, ODQ, NPRS, and a dichotomous 2-item fear-avoidance screening questionnaire. Following the initial evaluation, physical therapists rated perceived patient fear-avoidance on a 0-to-10 scale and recorded 2 influences on their ratings. Spearman correlation and independent t tests determined the level of association of therapist 0-to-10 ratings and 2-item screening with fear-avoidance and clinical measures. Therapist ratings of perceived patient fear-avoidance had fair to moderate interrater reliability (ICC2,1 = 0.663). Therapist ratings did not strongly correlate with FABQ or TSK-11 scores. Instead, they unexpectedly had stronger associations with ODQ and PCS scores. Both 2-item screening questions were associated with FABQ-physical activity scores, while the fear of physical activity question was also associated with FABQ-work, TSK-11, PCS, and ODQ scores

  5. Identifying Stereotypes in the Online Perception of Physical Attractiveness

    OpenAIRE

    Araújo, Camila Souza; Meira Jr., Wagner; Almeida, Virgilio

    2016-01-01

    Stereotyping can be viewed as oversimplified ideas about social groups. They can be positive, neutral or negative. The main goal of this paper is to identify stereotypes for female physical attractiveness in images available in the Web. We look at the search engines as possible sources of stereotypes. We conducted experiments on Google and Bing by querying the search engines for beautiful and ugly women. We then collect images and extract information of faces. We propose a methodology and app...

  6. PHYSICAL AND MECHANICAL CHARACTERISTICS OF BUILDING MATERIALS OF HISTORIC BUILDINGS

    Directory of Open Access Journals (Sweden)

    Jiří Witzany

    2017-12-01

    Full Text Available The article presents partial results of laboratory research into physical and mechanical characteristics of materials most commonly used as walling units in masonry structures of historic and heritage buildings. Core boreholes and specimens for the laboratory research of selected characteristics were sampled from accessible places of historic buildings, which had not been restored or reconstructed. The results of the research brought new knowledge about the unreliability (variance of the properties of historical, mainly natural building materials, and, at the same time, pointed out the need for further research and extension of knowledge necessary for the assessment of residual physical and mechanical characteristics of historic masonry structures.

  7. PHYSICAL AND MECHANICAL PROPERTIES OF Araucaria angustifolia (Bertol. WOOD FOR THREE STRATUM PHYTOSOCIOLOGICAL

    Directory of Open Access Journals (Sweden)

    Rafael Beltrame

    2010-11-01

    Full Text Available The study of physical and mechanical properties of wood is essential for industrial use both in construction and the manufacture of furniture. Thus, the study aimed to determine the physical and mechanical properties of the Araucaria angustifolia wood in terms of three strata phytosociological. For this, 15 trees were felled, five belonging to the upper stratum, the middle stratum five and five for the lower strata. The trees were deployed for the preparation of specimens used for mechanical testing. In the mechanical characterization of the species assays were performed for impact resistance, static bending, compression axial and perpendicular to the fibers. As for the characterization of physical properties, determined the apparent specific gravity at 12% relative humidity for each extract. The results did not show significant differences in the tests of impact resistance and static bending to the strata phytosociological. As for the apparent specific gravity, compression axial and perpendicular there was a change in the values of propertiesbetween the strata phytosociological, is generally butter in the middle and upper strata. Therefore the physical and mechanical properties tend to present higher values these two strata. The data analysis allowed of Araucaria angustifolia wood has moderate mechanical strength when compared with other species studies.

  8. Project Physics Tests 3, The Triumph of Mechanics.

    Science.gov (United States)

    Harvard Univ., Cambridge, MA. Harvard Project Physics.

    Test items relating to Project Physics Unit 3 are presented in this booklet. Included are 70 multiple-choice and 20 problem-and-essay questions. Concepts of mechanics are examined on energy, momentum, kinetic theory of gases, pulse analyses, "heat death," water waves, power, conservation laws, normal distribution, thermodynamic laws, and…

  9. Thermal behavior and mechanical properties of physically crosslinked PVA/Gelatin hydrogels.

    Science.gov (United States)

    Liu, Yurong; Geever, Luke M; Kennedy, James E; Higginbotham, Clement L; Cahill, Paul A; McGuinness, Garrett B

    2010-02-01

    Poly (vinyl alcohol)/Gelatin hydrogels are under active investigation as potential vascular cell culture biomaterials, tissue models and vascular implants. The PVA/Gelatin hydrogels are physically crosslinked by the freeze-thaw technique, which is followed by a coagulation bath treatment. In this study, the thermal behavior of the gels was examined by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). Rheological measurement and uniaxial tensile tests revealed key mechanical properties. The role of polymer fraction in relation to these mechanical properties is explored. Gelatin has no significant effect on the thermal behavior of PVA, which indicates that no substantial change occurs in the PVA crystallite due to the presence of gelatin. The glass transition temperature, melting temperature, degree of crystallinity, polymer fraction, storage modulus (G') and ultimate strength of one freeze-thaw cycle (1FT) hydrogels are inferior to those of 3FT hydrogels. With coagulation, both 1FT and 3FT hydrogels shifted to a lower value of T(g), melting temperature and polymer fraction are further increased and the degree of crystallinity is depressed. The mechanical properties of 1FT, but not 3FT, were strengthened with coagulation treatment. This study gives a detailed investigation of the microstructure formation of PVA/Gelatin hydrogel in each stage of physical treatments which helps us to explain the role of physical treatments in tuning their physical properties for biomechanical applications. Copyright 2009 Elsevier Ltd. All rights reserved.

  10. Physical, mechanical, and fire properties of oriented strandboard with fire retardant treated veneers

    Science.gov (United States)

    Nadir Ayrilmis; Zeki Candan; Robert White

    2007-01-01

    This study evaluated physical, mechanical and fire properties of oriented strand boards (OSB) covered with fire retardant treated veneers. The beech (Fagus orientalis Lipsky) veneers were treated with either monoammonium phosphate, diammonium phosphate, lime water or a borax/boric acid (1 : 1 by weight) mixture. Physical and mechanical properties of the specimens were...

  11. Mechanical and physical properties of agro-based fiberboard

    Science.gov (United States)

    S. Lee; T.F. Shupe; C.Y. Hse

    2006-01-01

    In order to better utilize agricultural fibers as an alternative resource for composite panels, several variables were investigated to improve mechanical and physical properties of agm-based fiberboard. This study focused on the effect of fiber morphology, slenderness ratios (UD), and fiber mixing combinations on panel properties. The panel construction types were also...

  12. Some Physical and Mechanical Properties of Daniellia Ogea Harms ...

    African Journals Online (AJOL)

    ADOWIE PERE

    density were the physical properties tested while the mechanical properties were the modulus of rupture ... 300kN capacity of the food laboratory of the department of Agriculture of the University. ..... Negro, F; Cremonini, C; Zanuttini, R (2013).

  13. Mechanism-based classification of pain for physical therapy management in palliative care: A clinical commentary

    Directory of Open Access Journals (Sweden)

    Senthil P Kumar

    2011-01-01

    Full Text Available Pain relief is a major goal for palliative care in India so much that most palliative care interventions necessarily begin first with pain relief. Physical therapists play an important role in palliative care and they are regarded as highly proficient members of a multidisciplinary healthcare team towards management of chronic pain. Pain necessarily involves three different levels of classification-based upon pain symptoms, pain mechanisms and pain syndromes. Mechanism-based treatments are most likely to succeed compared to symptomatic treatments or diagnosis-based treatments. The objective of this clinical commentary is to update the physical therapists working in palliative care, on the mechanism-based classification of pain and its interpretation, with available therapeutic evidence for providing optimal patient care using physical therapy. The paper describes the evolution of mechanism-based classification of pain, the five mechanisms (central sensitization, peripheral neuropathic, nociceptive, sympathetically maintained pain and cognitive-affective are explained with recent evidence for physical therapy treatments for each of the mechanisms.

  14. Progress in organic and physical chemistry structures and mechanisms

    CERN Document Server

    Zaikov, Gennady E; Lobanov, Anton V

    2013-01-01

    Progress in Organic and Physical Chemistry: Structures and Mechanisms provides a collection of new research in the field of organic and physical properties, including new research on: The physical principles of the conductivity of electrical conducting polymer compounds The dependence on constants of electromagnetic interactions upon electron spacial-energy characteristics Effects of chitosan molecultural weight on rehological behavior of chitosan modified nanoclay at hight hydrated state Bio-structural energy criteria of functional states in normal and pathological conditions Potentiometric study on the international between devalent cations and sodium carboxylates in aqueous solutions Structural characteristic changes in erythrocyte membranes of mice bearing Alzheimer's-like disease caused by the olfactory bulbetomy This volume is intended to provide an overview of new studies and research for engineers, faculty, researchers, and upper-level students in the field of organic and physical chemistry.

  15. PHYSICAL AND MECHANICAL PROPERTIES OF JUVENILE Schizolobium amazonicum WOOD

    Directory of Open Access Journals (Sweden)

    Graziela Baptista Vidaurre

    2018-03-01

    Full Text Available ABSTRACT Growth in world demand for wood implies a search for new fast growing species with silvicultural potential, and in this scenario for native species such as Paricá . Thus, the objective of this study was determining the physical and mechanical wood properties of the Schizolobium amazonicum species (known as Paricá in Brazil. Trees were collected from commercial plantations located in the north of Brazil with ages of 5, 7, 9 and 11 years. Four logs from trees of each age in the longitudinal direction of the trees were obtained, and later a diametrical plank of each log was taken to manufacture the specimens which were used to evaluate some physical and mechanical properties of the wood. The basic density of Paricá was reduced in the basetop direction and no difference between the radial positions was observed, while the average basic density of this wood was characterized as low. The region close to the bark showed less longitudinal contraction and also greater homogeneity of this property along the trunk, while for tangential contraction the smallest variation was found in the region near the pith. Paricá wood contraction was characterized as low. Age influenced most of the mechanical properties, where logs from the base had the highest values of mechanical strength.

  16. Review on Synthesis, Thermo-Physical Property, and Heat Transfer Mechanism of Nanofluids

    Directory of Open Access Journals (Sweden)

    Mahesh Suresh Patil

    2016-10-01

    Full Text Available Nanofluids are suspended nano-sized particles in a base fluid. With increasing demand for more high efficiency thermal systems, nanofluids seem to be a promising option for researchers. As a result, numerous investigations have been undertaken to understand the behaviors of nanofluids. Since their discovery, the thermo-physical properties of nanofluids have been under intense research. Inadequate understanding of the mechanisms involved in the heat transfer of nanofluids has been the major obstacle for the development of sophisticated nanofluids with the desired properties. In this comprehensive review paper, investigations on synthesis, thermo-physical properties, and heat transfer mechanisms of nanofluids have been reviewed and presented. Results show that the thermal conductivity of nanofluids increases with the increase of the operating temperature. This can potentially be used for the efficiency enhancement of thermal systems under higher operating temperatures. In addition, this paper also provides details concerning dependency of the thermo-physical properties as well as synthesis and the heat transfer mechanism of the nanofluids.

  17. Understanding the mechanisms of lung mechanical stress

    Directory of Open Access Journals (Sweden)

    C.S.N.B. Garcia

    2006-06-01

    Full Text Available Physical forces affect both the function and phenotype of cells in the lung. Bronchial, alveolar, and other parenchymal cells, as well as fibroblasts and macrophages, are normally subjected to a variety of passive and active mechanical forces associated with lung inflation and vascular perfusion as a result of the dynamic nature of lung function. These forces include changes in stress (force per unit area or strain (any forced change in length in relation to the initial length and shear stress (the stress component parallel to a given surface. The responses of cells to mechanical forces are the result of the cell's ability to sense and transduce these stimuli into intracellular signaling pathways able to communicate the information to its interior. This review will focus on the modulation of intracellular pathways by lung mechanical forces and the intercellular signaling. A better understanding of the mechanisms by which lung cells transduce physical forces into biochemical and biological signals is of key importance for identifying targets for the treatment and prevention of physical force-related disorders.

  18. Are quantum-mechanical-like models possible, or necessary, outside quantum physics?

    International Nuclear Information System (INIS)

    Plotnitsky, Arkady

    2014-01-01

    This article examines some experimental conditions that invite and possibly require recourse to quantum-mechanical-like mathematical models (QMLMs), models based on the key mathematical features of quantum mechanics, in scientific fields outside physics, such as biology, cognitive psychology, or economics. In particular, I consider whether the following two correlative features of quantum phenomena that were decisive for establishing the mathematical formalism of quantum mechanics play similarly important roles in QMLMs elsewhere. The first is the individuality and discreteness of quantum phenomena, and the second is the irreducibly probabilistic nature of our predictions concerning them, coupled to the particular character of the probabilities involved, as different from the character of probabilities found in classical physics. I also argue that these features could be interpreted in terms of a particular form of epistemology that suspends and even precludes a causal and, in the first place, realist description of quantum objects and processes. This epistemology limits the descriptive capacity of quantum theory to the description, classical in nature, of the observed quantum phenomena manifested in measuring instruments. Quantum mechanics itself only provides descriptions, probabilistic in nature, concerning numerical data pertaining to such phenomena, without offering a physical description of quantum objects and processes. While QMLMs share their use of the quantum-mechanical or analogous mathematical formalism, they may differ by the roles, if any, the two features in question play in them and by different ways of interpreting the phenomena they considered and this formalism itself. This article will address those differences as well. (paper)

  19. Women with physical disability and the mammogram: An observational study to identify barriers and facilitators

    International Nuclear Information System (INIS)

    Poulos, Ann; Balandin, Susan; Llewellyn, Gwynnyth; McCarthy, Louella; Dark, Leigha

    2011-01-01

    Purpose: To identify barriers and facilitators experienced by women with physical disability having a mammogram. Method: Direct observation of the mammography procedure for women with a range of physical disability at screening facilities of BreastScreen NSW Australia. Results: A volunteer sample of 13 women with varying degrees of physical disability participated in the study. The outcomes suggested that many barriers for women with physical disability can be ameliorated by environmental adaptations and guidelines for both radiographers and women. Some women however cannot be screened successfully, or can be screened only with a level of trauma and/or pain which militates against their continuation within the screening program. This study has identified physical limitations which preclude a successful outcome, those which increase the discomfort/pain of the procedure and aspects of the procedure which can be improved to minimise the experience of discomfort/pain. Conclusion: From the outcomes of the study the development of a decision tool is indicated as a method of providing information for women with physical disability and their doctors as to the likelihood of a successful outcome to participation in mammography screening.

  20. Women with physical disability and the mammogram: An observational study to identify barriers and facilitators

    Energy Technology Data Exchange (ETDEWEB)

    Poulos, Ann, E-mail: ann.poulos@sydney.edu.a [University of Sydney, Faculty of Health Sciences, Discipline of Medical Radiation Sciences, PO Box 170, Lidcombe, NSW 1825 (Australia); Balandin, Susan [University of Sydney, Faculty of Health Sciences, Discipline of Speech Pathology, PO Box 170, Lidcombe, NSW 1825 (Australia); Avdeling for helse- og sosialfag, Hogskolen i Molde, Postboks 2110, 6402 Molde (Norway); Llewellyn, Gwynnyth; McCarthy, Louella [University of Sydney, Faculty of Health Sciences, Discipline of Occupational Therapy, PO Box 170, Lidcombe, NSW 1825 (Australia); Dark, Leigha [University of Sydney, Faculty of Health Sciences, Discipline of Speech Pathology, PO Box 170, Lidcombe, NSW 1825 (Australia)

    2011-02-15

    Purpose: To identify barriers and facilitators experienced by women with physical disability having a mammogram. Method: Direct observation of the mammography procedure for women with a range of physical disability at screening facilities of BreastScreen NSW Australia. Results: A volunteer sample of 13 women with varying degrees of physical disability participated in the study. The outcomes suggested that many barriers for women with physical disability can be ameliorated by environmental adaptations and guidelines for both radiographers and women. Some women however cannot be screened successfully, or can be screened only with a level of trauma and/or pain which militates against their continuation within the screening program. This study has identified physical limitations which preclude a successful outcome, those which increase the discomfort/pain of the procedure and aspects of the procedure which can be improved to minimise the experience of discomfort/pain. Conclusion: From the outcomes of the study the development of a decision tool is indicated as a method of providing information for women with physical disability and their doctors as to the likelihood of a successful outcome to participation in mammography screening.

  1. Investigation on the feasibility of coffee husk (endocarp) as efficient filler material for enhancing physical and mechanical properties of styrofoam based particleboard

    Science.gov (United States)

    Milawarni; Nurlaili; Ernayusnianti

    2018-03-01

    This research focuses on introducing a coffee husk as viable and efficient filler for enhancing physical and mechanical properties of Styrofoam based particleboard. Heat treatment method was adopted to produce the particleboard from the mixture of coffee husk (CH) with Styrofoam (PS). Styrofoam is material derived from polystyrene. The aim of this research is to get the appropriate weight composition between coffee husks with PS and to identify the physical and mechanical properties of the produced particleboard. The composition of coffee husk varies between 0-90%wt. The manufacture of particleboard i.e. coffee husk milled with size 20/10 mesh then soak with 10% NaOH for 2 hours, rinsed with clean water and dried and weight according to the composition. The mixture of CH and PS is inserted into mold and put into hot-press. The result shows from physical properties that density, water absorption and thick development test corresponding with SNI 03-2105-2006 standard, the mechanical properties shows MOR test meets the standard on the addition of CH 10-50%, while the MOE test has not meet the standard.

  2. Investigation of gamma-ray fingerprint identifying mechanism for the types of radiation sources

    International Nuclear Information System (INIS)

    Liu Suping; Wu Huailong; Gu Dangchang; Gong Jian; Hao Fanhua; Hu Guangchun

    2002-01-01

    Radiation fingerprints sometimes can be used to label and identify the radiation resources. For instance, in a future nuclear reduction treaty that requires verification of irreversible dismantling of reduced nuclear warheads, the radiation fingerprints of nuclear warheads are expected to play a key role in labelling and identifying the reduced warheads. It would promote the development of nuclear warheads deep-cuts verification technologies if authors start right now some investigations on the issues related to the radiation fingerprints. The author dedicated to the investigation of gamma-ray fingerprint identifying mechanism for the types of radiation resources. The purpose of the identifying mechanism investigation is to find a credible way to tell whether any two gamma-ray spectral fingerprints that are under comparison are radiated from the same resource. The authors created the spectrum pattern comparison (SPC) to study the comparability of the two radiation fingerprints. Guided by the principle of SPC, the authors programmed a software dedicated to identify the types of radiation resources. The efficiency of the software was tested by a series of experiments with some laboratory gamma-ray resources. The experiments were designed to look into the relations between comparability and radioactive statistics, and the relations between comparability and some measurement conditions such as real time, resource activity and background etc. Two main results can be drawn from the investigation: 1) it is quite feasible to use the concept of spectral comparability to answer the question whether any two gamma-ray fingerprints are identity or not; 2) the identifying mechanism can only identify the types of radiation resources, and cannot identify the individuals with the same type and small differences

  3. Inflammatory Mechanisms Associated with Skeletal Muscle Sequelae after Stroke: Role of Physical Exercise

    Science.gov (United States)

    Coelho Junior, Hélio José; Gambassi, Bruno Bavaresco; Diniz, Tiego Aparecido; Fernandes, Isabela Maia da Cruz; Caperuto, Érico Chagas; Uchida, Marco Carlos; Lira, Fabio Santos

    2016-01-01

    Inflammatory markers are increased systematically and locally (e.g., skeletal muscle) in stroke patients. Besides being associated with cardiovascular risk factors, proinflammatory cytokines seem to play a key role in muscle atrophy by regulating the pathways involved in this condition. As such, they may cause severe decrease in muscle strength and power, as well as impairment in cardiorespiratory fitness. On the other hand, physical exercise (PE) has been widely suggested as a powerful tool for treating stroke patients, since PE is able to regenerate, even if partially, physical and cognitive functions. However, the mechanisms underlying the beneficial effects of physical exercise in poststroke patients remain poorly understood. Thus, in this study we analyze the candidate mechanisms associated with muscle atrophy in stroke patients, as well as the modulatory effect of inflammation in this condition. Later, we suggest the two strongest anti-inflammatory candidate mechanisms, myokines and the cholinergic anti-inflammatory pathway, which may be activated by physical exercise and may contribute to a decrease in proinflammatory markers of poststroke patients. PMID:27647951

  4. a comparative study of the physical and mechanical properties

    African Journals Online (AJOL)

    HP-User

    [11] British Standard Institutes, BS EN 1097-6:2000, Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption, British Standard Institution, London. [12] Adaba, C. S., Agunwamba, J. C., Nwoji, C. U., Onya, O. E.,. Oze, S, “Comparative Cost And Strength Analysis Of.

  5. Effect of Kettlebell Lifting on Physical Condition of Future Mechanical Engineers

    Directory of Open Access Journals (Sweden)

    А. П. Конох

    2016-08-01

    Full Text Available The objective of the paper is to study the effect of exercises with kettlebell lifting elements on the physical condition of future mechanical engineers. Materials and methods. To address the tasks set, the study used the following research methods: theoretical analysis and collation of literary sources; implementation of a pilot program of physical education through kettlebell lifting in higher agricultural educational institutions; methods of mathematical statistics. Research results. The paper focuses on the relevant issue of theoretical and methodological support of the process of improving students' physical condition. The study has determined the effect of kettlebell lifting on the physical condition of the future mechanical engineers involved in maintenance and repair of agricultural equipment and machinery. Kettlebell lifting proves to provide good physical training, has a positive effect on the human body, and strengthens health in general. The research conducted gave grounds to determine that the level of the physical condition of the test group students is satisfactory on all indicators. This meets the requirements set before the future specialists. Conclusions. The study of the effectiveness of kettlebell lifting influence on the physical condition of the test group students yielded positive results. As a result, the training improves the performance of the students’ respiratory and cardiovascular systems, decreases their heart rate and blood pressure, enhances economization of the body systems performance at rest and at load, boosts the reserve capacity of these systems, reduces the recovery period after load, and improves the metabolic processes, which contributes to enhancing the organism tolerance to the unfavorable factors of the profession-related activity.

  6. From classical to quantum mechanics: ``How to translate physical ideas into mathematical language''

    Science.gov (United States)

    Bergeron, H.

    2001-09-01

    Following previous works by E. Prugovečki [Physica A 91A, 202 (1978) and Stochastic Quantum Mechanics and Quantum Space-time (Reidel, Dordrecht, 1986)] on common features of classical and quantum mechanics, we develop a unified mathematical framework for classical and quantum mechanics (based on L2-spaces over classical phase space), in order to investigate to what extent quantum mechanics can be obtained as a simple modification of classical mechanics (on both logical and analytical levels). To obtain this unified framework, we split quantum theory in two parts: (i) general quantum axiomatics (a system is described by a state in a Hilbert space, observables are self-adjoints operators, and so on) and (ii) quantum mechanics proper that specifies the Hilbert space as L2(Rn); the Heisenberg rule [pi,qj]=-iℏδij with p=-iℏ∇, the free Hamiltonian H=-ℏ2Δ/2m and so on. We show that general quantum axiomatics (up to a supplementary "axiom of classicity") can be used as a nonstandard mathematical ground to formulate physical ideas and equations of ordinary classical statistical mechanics. So, the question of a "true quantization" with "ℏ" must be seen as an independent physical problem not directly related with quantum formalism. At this stage, we show that this nonstandard formulation of classical mechanics exhibits a new kind of operation that has no classical counterpart: this operation is related to the "quantization process," and we show why quantization physically depends on group theory (the Galilei group). This analytical procedure of quantization replaces the "correspondence principle" (or canonical quantization) and allows us to map classical mechanics into quantum mechanics, giving all operators of quantum dynamics and the Schrödinger equation. The great advantage of this point of view is that quantization is based on concrete physical arguments and not derived from some "pure algebraic rule" (we exhibit also some limit of the correspondence

  7. The regulatory framework of special medical group students' physical education: identifying the problem.

    Directory of Open Access Journals (Sweden)

    Mazur Valerij Anatol'evich

    2011-09-01

    Full Text Available The question of regulatory framework for special medical group students' physical education, and their physical condition in particular is elaborated. It is found that in the current program the identified question is missing, although the assessment of individual performance standards for the physical condition of the students was envisaged in the programs of 1977 and 1982. The need for such an assessment is indicated by the large number of Ukrainian and foreign pediatricians and specialists in therapeutic physical culture. At the same time the standards for assessing these indicators are not developed. It complicates the formation of positive motivation of students to regular classes, and does not promote their self-confidence, capabilities and effectiveness of monitoring the effectiveness of exercise in various forms. The findings suggest the need to define the optimal composition of the bulk of tests and functional tests to assess the physical condition of special medical group students with various diseases and to develop appropriate indicators for their evaluation standards.

  8. Identifying serotonergic mechanisms underlying the corticolimbic response to threat in humans

    DEFF Research Database (Denmark)

    Fisher, Patrick M; Hariri, Ahmad R

    2013-01-01

    . Integrating these methodological approaches offers novel opportunities to identify mechanisms through which serotonin signalling contributes to differences in brain function and behaviour, which in turn can illuminate factors that confer risk for illness and inform the development of more effective treatment...

  9. Introduction to Physics (Mechanics): A Semi-Self Paced Approach.

    Science.gov (United States)

    Schlenker, Richard M.

    Presented is a guide for an introductory college level physics course in mechanics. The course is contract graded and allows students to proceed at their own pace; however, lectures, problem solving sessions, and laboratory sessions are included. Students on an independent basis review video tapes, film loops, library study, and conduct an…

  10. Hamiltonian and physical Hilbert space in polymer quantum mechanics

    International Nuclear Information System (INIS)

    Corichi, Alejandro; Vukasinac, Tatjana; Zapata, Jose A

    2007-01-01

    In this paper, a version of polymer quantum mechanics, which is inspired by loop quantum gravity, is considered and shown to be equivalent, in a precise sense, to the standard, experimentally tested Schroedinger quantum mechanics. The kinematical cornerstone of our framework is the so-called polymer representation of the Heisenberg-Weyl (HW) algebra, which is the starting point of the construction. The dynamics is constructed as a continuum limit of effective theories characterized by a scale, and requires a renormalization of the inner product. The result is a physical Hilbert space in which the continuum Hamiltonian can be represented and that is unitarily equivalent to the Schroedinger representation of quantum mechanics. As a concrete implementation of our formalism, the simple harmonic oscillator is fully developed

  11. Research Methods Identifying Correlation Between Physical Environment of Schools and Educational Paradigms

    Directory of Open Access Journals (Sweden)

    Grėtė Brukštutė

    2016-04-01

    Full Text Available The article is analysing the research that was already carried out in order to determine correlation between a physical environment of schools and educational paradigms. While selecting materials for the analysis, the attention was focused on studies conducted in the USA and European countries. Based on these studies the methodological attitudes towards coherence of the education and spatial structures were tried to identify. Homogeneity and conformity of an educational character and a physical learning environment became especially important during changes of educational conceptions. The issue how educational paradigms affect the architecture of school buildings is not yet analysed in Lithuania, therefore the results of this research could actualize a theme on correlation between educational paradigms and the architecture of school buildings and form initial guidelines for the development of the modern physical learning environment.

  12. Identifying and addressing specific student difficulties in advanced thermal physics

    Science.gov (United States)

    Smith, Trevor I.

    As part of an ongoing multi-university research study on student understanding of concepts in thermal physics at the upper division, I identified several student difficulties with topics related to heat engines (especially the Carnot cycle), as well as difficulties related to the Boltzmann factor. In an effort to address these difficulties, I developed two guided-inquiry worksheet activities (a.k.a. tutorials) for use in advanced undergraduate thermal physics courses. Both tutorials seek to improve student understanding of the utility and physical background of a particular mathematical expression. One tutorial focuses on a derivation of Carnot's theorem regarding the limit on thermodynamic efficiency, starting from the Second Law of Thermodynamics. The other tutorial helps students gain an appreciation for the origin of the Boltzmann factor and when it is applicable; focusing on the physical justification of its mathematical derivation, with emphasis on the connections between probability, multiplicity, entropy, and energy. Student understanding of the use and physical implications of Carnot's theorem and the Boltzmann factor was assessed using written surveys both before and after tutorial instruction within the advanced thermal physics courses at the University of Maine and at other institutions. Classroom tutorial sessions at the University of Maine were videotaped to allow in-depth scrutiny of student successes and failures following tutorial prompts. I also interviewed students on various topics related to the Boltzmann factor to gain a more complete picture of their understanding and inform tutorial revisions. Results from several implementations of my tutorials at the University of Maine indicate that students did not have a robust understanding of these physical principles after lectures alone, and that they gain a better understanding of relevant topics after tutorial instruction; Fisher's exact tests yield statistically significant improvement at the

  13. Investigation of gamma-ray fingerprint identifying mechanism for the types of radiation sources

    CERN Document Server

    Liu Su Ping; Gu Dang Chang; Gong-Jian; Hao Fan Hua; Hu Guang Chun

    2002-01-01

    Radiation fingerprints sometimes can be used to label and identify the radiation resources. For instance, in a future nuclear reduction treaty that requires verification of irreversible dismantling of reduced nuclear warheads, the radiation fingerprints of nuclear warheads are expected to play a key role in labelling and identifying the reduced warheads. It would promote the development of nuclear warheads deep-cuts verification technologies if authors start right now some investigations on the issues related to the radiation fingerprints. The author dedicated to the investigation of gamma-ray fingerprint identifying mechanism for the types of radiation resources. The purpose of the identifying mechanism investigation is to find a credible way to tell whether any two gamma-ray spectral fingerprints that are under comparison are radiated from the same resource. The authors created the spectrum pattern comparison (SPC) to study the comparability of the two radiation fingerprints. Guided by the principle of SPC,...

  14. Physical and mechanical behaviour of a roller compacted concrete ...

    African Journals Online (AJOL)

    In order to study the behaviour of a roller compacted concrete (RCC) reinforced with polypropylene fiber, six types of RCC were made with different content of fibers (0, 0.5, 1, 1.5, 2 and 2.5 Kg/m3). The physical parameters are the density, the workability, the shrinkage and the water absorption. For the mechanical ...

  15. Impact of Desalination on Physical and Mechanical Properties of Lanzhou Loess

    Science.gov (United States)

    Bing, Hui; Zhang, Ying; Ma, Min

    2017-12-01

    Soluble salt in soil has a significant influence on the physical and mechanical properties of the soil. We performed desalination experiments on Lanzhou loess, a typical sulfate saline soil, to study the effects of salt on the physical and mechanical properties of the loess and compare variations in the soil properties after desalination. The Atterberg limits of the soil increased after desalination as a result of changes in the soil particle composition and grain refinement. The shear and uniaxial compressive strength of the soil increased as a result of decreased calcitic cementation and other changes to the soil structure. Scanning electron microstructure (SEM) and mercury intrusion porosimetry (MIP) procedures revealed changes to the microstructure and pore-size distribution of the Lanzhou loess after desalination.

  16. Physical and mechanical properties of LDPE incorporated with different starch sources

    Science.gov (United States)

    Kormin, Shaharuddin; Kormin, Faridah; Dalour Hossen Beg, Mohammad; Bijarimi Mat Piah, Mohd

    2017-08-01

    In this study it was investigated the incorporation of different starches, such as sago starch, corn starch, potato starch, tapioca starch and wheat starch, in low-density polyethylene matrix (LDPE) to enhanced mechanical properties and to obtain partially biodegradable product with the aim to reduce the plastics wastes in the environment. For comparison, virgin LDPE, LDPE with different sources of starch blends were prepared and characterized under the same conditions. The starches were mixed to the LDPE using a twin screw extruder to guarantee the homogeneity of the formulations. The compound were shaping processed by injection moulding. The characterization of those compounds was done by physical (density, MFI), mechanical (Universal tensile machine). The addition of starch to LDPE reduced the MFI values, the tensile strength, elongation at break and impact strength, whereas the elastic modulus, flexural modulus and flexural strength increased. LDPE/SS show the good mechanical behavior compared to other formulation. The physical and mechanical properties were evident when 5 and 30 wt% were added. Water uptake increased with increased starch content and immersion time. The time taken for the composites to equilibrate was about one month even when they were immersed completely in water.

  17. Use of globally unique identifiers (GUIDs) to link herbarium specimen records to physical specimens.

    Science.gov (United States)

    Nelson, Gil; Sweeney, Patrick; Gilbert, Edward

    2018-02-01

    With the advent of the U.S. National Science Foundation's Advancing Digitization of Biodiversity Collections program and related worldwide digitization initiatives, the rate of herbarium specimen digitization in the United States has expanded exponentially. As the number of electronic herbarium records proliferates, the importance of linking these records to the physical specimens they represent as well as to related records from other sources will intensify. Although a rich and diverse literature has developed over the past decade that addresses the use of specimen identifiers for facilitating linking across the internet, few implementable guidelines or recommended practices for herbaria have been advanced. Here we review this literature with the express purpose of distilling a specific set of recommendations especially tailored to herbarium specimen digitization, curation, and management. We argue that associating globally unique identifiers (GUIDs) with physical herbarium specimens and including these identifiers in all electronic records about those specimens is essential to effective digital data curation. We also address practical applications for ensuring these associations.

  18. The Grasp of Physics Concepts of Motion: Identifying Particular Patterns in Students' Thinking

    Science.gov (United States)

    Obaidat, Ihab; Malkawi, Ehab

    2009-01-01

    We have investigated the grasp of some of the basic concepts of motion by students taking the introductory physics course in Mechanics at United Arab Emirates University (UAEU). We have developed a short research-based multiple-choice test where we were able to extract some information about the state of knowledge of the students. In general, the…

  19. Investigation of the mechanical and physical properties of greywacke specimens

    Czech Academy of Sciences Publication Activity Database

    Holub, Karel; Konečný, Pavel; Knejzlík, Jaromír

    2009-01-01

    Roč. 46, č. 1 (2009), s. 188-193 ISSN 1365-1609 Institutional research plan: CEZ:AV0Z30860518 Keywords : greywacke * mechanical and physical properties Subject RIV: DC - Siesmology, Volcanology, Earth Structure Impact factor: 1.142, year: 2009 www.elsevier.com/locate ijrmms

  20. Statistical mechanics and the physics of fluids

    CERN Document Server

    Tosi, Mario

    This volume collects the lecture notes of a course on statistical mechanics, held at Scuola Normale Superiore di Pisa for third-to-fifth year students in physics and chemistry. Three main themes are covered in the book. The first part gives a compact presentation of the foundations of statistical mechanics and their connections with thermodynamics. Applications to ideal gases of material particles and of excitation quanta are followed by a brief introduction to a real classical gas and to a weakly coupled classical plasma, and by a broad overview on the three states of matter.The second part is devoted to fluctuations around equilibrium and their correlations. Coverage of liquid structure and critical phenomena is followed by a discussion of irreversible processes as exemplified by diffusive motions and by the dynamics of density and heat fluctuations. Finally, the third part is an introduction to some advanced themes: supercooling and the glassy state, non-Newtonian fluids including polymers and liquid cryst...

  1. Uncovering the underlying physical mechanisms of biological systems via quantification of landscape and flux

    International Nuclear Information System (INIS)

    Xu Li; Chu Xiakun; Yan Zhiqiang; Zheng Xiliang; Zhang Kun; Zhang Feng; Yan Han; Wu Wei; Wang Jin

    2016-01-01

    In this review, we explore the physical mechanisms of biological processes such as protein folding and recognition, ligand binding, and systems biology, including cell cycle, stem cell, cancer, evolution, ecology, and neural networks. Our approach is based on the landscape and flux theory for nonequilibrium dynamical systems. This theory provides a unifying principle and foundation for investigating the underlying mechanisms and physical quantification of biological systems. (topical review)

  2. An industrial educational laboratory at Ducati Foundation: narrative approaches to mechanics based upon continuum physics

    Science.gov (United States)

    Corni, Federico; Fuchs, Hans U.; Savino, Giovanni

    2018-02-01

    This is a description of the conceptual foundations used for designing a novel learning environment for mechanics implemented as an Industrial Educational Laboratory - called Fisica in Moto (FiM) - at the Ducati Foundation in Bologna. In this paper, we will describe the motivation for and design of the conceptual approach to mechanics used in the lab - as such, the paper is theoretical in nature. The goal of FiM is to provide an approach to the teaching of mechanics based upon imaginative structures found in continuum physics suitable to engineering and science. We show how continuum physics creates models of mechanical phenomena by using momentum and angular momentum as primitive quantities. We analyse this approach in terms of cognitive linguistic concepts such as conceptual metaphor and narrative framing of macroscopic physical phenomena. The model discussed here has been used in the didactical design of the actual lab and raises questions for an investigation of student learning of mechanics in a narrative setting.

  3. 2013 International Symposium on Physics and Mechanics of New Materials and Underwater Applications

    CERN Document Server

    Parinov, Ivan; Topolov, Vitaly; Advanced Materials : Physics, Mechanics and Applications

    2014-01-01

    Advanced materials are the basis of modern science and technology. This proceedings volume presents a broad spectrum of studies of novel materials covering their processing techniques, physics, mechanics, and applications. The book is concentrated on nanostructures, ferroelectric crystals, materials and composites, materials for solar cells and also polymeric composites. Nanotechnology approaches, modern piezoelectric techniques and also latest achievements in materials science, condensed matter physics, mechanics of deformable solids and numerical methods are presented. Great attention is devoted to novel devices with high accuracy, longevity and extended possibilities to work in wide temperature and pressure ranges, aggressive media etc. The characteristics of materials and composites with improved properties opening new possibilities of various physical processes, in particular transmission and receipt of signals under water, are described.

  4. IMPACT OF NANOMODIFIERS ON MECHANICAL AND PHYSICAL PROPERTIES OF GYPSUM BINDERS

    Directory of Open Access Journals (Sweden)

    DEREVIANKO V. N.

    2017-02-01

    Full Text Available Summary. Problem statement. In the next 10 years, more than 90% of materials will be replaced with new materials – nanocomposites [1]. The nanocomponents application will allow manufacture of high-strength materials with reduced production cost and will ensure demand for products [2]. Researches aimed to determination of carbon nanotube type nanomodifier concentration impact on the physical and mechanical properties of gypsum binders are important today and must result in creation of competitive strong nano-materials. Purpose. Research of carbon nanotube (CNT type nanomodifier concentration impact on the physical and mechanical properties of gypsum binders. Conclusion. Sample microstructure analysis revealed that the non-modified gypsum sample structure is dominated by prismatic and lamellar crystals randomly distributed throughout the matrix volume. In this case, loose structure with increased porosity is formed, which results in sample mechanical strength reduction. In the CNT-modified gypsum matrix, well-ordered and homogeneous structure is formed with larger needle-shaped crystals, which results in the phase-contacting area increase, porosity reduction and thus the physical and mechanical characteristics improvement. It is experimentally proved that at the identical nano-modifier content in the gypsum matrix (0.035 %, maximum compression strength gain is achieved with the use of CNT and makes 28- 30%. At the use of initial carbon nanotubes, increase in strength at the same nano-modifier content makes 13-15%. The Ca2+ ions interaction with the graphene-like carbon surface was investigated by the DFT method. Capability is demonstrated of the covalent calcium bonding with the hexagonal carbon surface cell as a result of overlap of Ca2+ valence 3p orbitals and carbon 2р orbitals.

  5. TA Mentorship in Lecture significantly enhances students' learning in mechanics in large introductory physics classes

    Science.gov (United States)

    Cheng, K.; Caglar, Mehmet

    2011-10-01

    Lab is an important component of students' learning in a traditional lecture-lab setting of introductory physics courses. Using standard mechanics concepts and baseline surveys as well as independent classroom observations, the effects of TA mentorship in Lecture on students' learning of physics concepts and problem-solving skills among different student subgroups taught by other TAs and lecturers using different level of student interactive engagement in classes have been analyzed. Our data indicate that in lecture training of TA promotes lecture/lab synergism in improvement students' learning of mechanics in large introductory physics classes.

  6. Effectiveness of physical, social and digital mechanisms against laptop theft in open organizations

    NARCIS (Netherlands)

    Dimkov, T.; Pieters, Wolter; Hartel, Pieter H.

    2010-01-01

    Organizations rely on physical, digital and social mechanisms to protect their IT systems. Of all IT systems, laptops are probably the most troublesome to protect, since they are easy to remove and conceal. When the thief has physical possession of the laptop, it is also difficult to protect the

  7. Evaluation of the mechanical and physical properties of a posterior ...

    African Journals Online (AJOL)

    To evaluate the mechanical and physical properties of a micro-hybrid resin composite used in adult posterior restorations A micro-hybrid, light curing resin composite Unolux BCS Composite Restorative, (UnoDent, England) was used to restore 74 carious classes I and II cavities on posterior teeth of 62 adult patients.

  8. Mechanical and assembly units of viral capsids identified via quasi-rigid domain decomposition.

    Directory of Open Access Journals (Sweden)

    Guido Polles

    Full Text Available Key steps in a viral life-cycle, such as self-assembly of a protective protein container or in some cases also subsequent maturation events, are governed by the interplay of physico-chemical mechanisms involving various spatial and temporal scales. These salient aspects of a viral life cycle are hence well described and rationalised from a mesoscopic perspective. Accordingly, various experimental and computational efforts have been directed towards identifying the fundamental building blocks that are instrumental for the mechanical response, or constitute the assembly units, of a few specific viral shells. Motivated by these earlier studies we introduce and apply a general and efficient computational scheme for identifying the stable domains of a given viral capsid. The method is based on elastic network models and quasi-rigid domain decomposition. It is first applied to a heterogeneous set of well-characterized viruses (CCMV, MS2, STNV, STMV for which the known mechanical or assembly domains are correctly identified. The validated method is next applied to other viral particles such as L-A, Pariacoto and polyoma viruses, whose fundamental functional domains are still unknown or debated and for which we formulate verifiable predictions. The numerical code implementing the domain decomposition strategy is made freely available.

  9. Identifying mechanisms that structure ecological communities by snapping model parameters to empirically observed tradeoffs.

    Science.gov (United States)

    Thomas Clark, Adam; Lehman, Clarence; Tilman, David

    2018-04-01

    Theory predicts that interspecific tradeoffs are primary determinants of coexistence and community composition. Using information from empirically observed tradeoffs to augment the parametrisation of mechanism-based models should therefore improve model predictions, provided that tradeoffs and mechanisms are chosen correctly. We developed and tested such a model for 35 grassland plant species using monoculture measurements of three species characteristics related to nitrogen uptake and retention, which previous experiments indicate as important at our site. Matching classical theoretical expectations, these characteristics defined a distinct tradeoff surface, and models parameterised with these characteristics closely matched observations from experimental multi-species mixtures. Importantly, predictions improved significantly when we incorporated information from tradeoffs by 'snapping' characteristics to the nearest location on the tradeoff surface, suggesting that the tradeoffs and mechanisms we identify are important determinants of local community structure. This 'snapping' method could therefore constitute a broadly applicable test for identifying influential tradeoffs and mechanisms. © 2018 The Authors. Ecology Letters published by CNRS and John Wiley & Sons Ltd.

  10. Mechanics of Ballast Compaction. Volume 3 : Field Test Results for Ballast Physical State Measurement

    Science.gov (United States)

    1982-03-01

    The important mechanical processes which influence the ballast physical state in track are tamping, crib and shoulder compaction and train traffic. Three methods of assessing physical state were used at four railroad sites to obtain needed data on th...

  11. Correlation between some mechanical and physical properties of polycrystalline graphites

    International Nuclear Information System (INIS)

    Yoda, Shinichi; Fujisaki, Katsuo

    1982-01-01

    Mechanical and physical properties of polycrystalline graphites, tensile strength, compressive strength, flexural strength, Young's modulus, thermal expansion coefficient, electrical resistivity, volume fraction of porosity, and graphitisation were measured for ten brand graphites. Correlation between the mechanical and physical properties of the graphites were studied. Young's modulus and thermal expansion coefficient of the graphites depend on volume fraction of porosity. The Young's modulus of the graphites tended to increase with increasing the thermal expansion coefficient. For an anisotropic graphite, an interesting relationship between the Young's modulus E and the thermal expansion coefficient al pha was found in any specimen orientations; alpha E=constant. The value of alphah E was dependent upon the volume fraction of porosity. It should be noted here that the electrical resistivity increased with decreasing grain size. The flexural and the compressive strength were related with the volume fraction of porosity while the tensile strength was not, The relationships between the tensile, the compressive and the flexural strength can be approximately expressed as linear functions over a wide range of the stresses. (author)

  12. Physical Activity in an Underserved Population: Identifying Technology Preferences.

    Science.gov (United States)

    Medairos, Robert; Kang, Vicky; Aboubakare, Carissa; Kramer, Matthew; Dugan, Sheila Ann

    2017-01-01

    This study aims to identify patterns of use and preferences related to technology platforms that could support physical activity (PA) programs in an underserved population. A 29-item questionnaire was administered at 5 health and wellness sites targeting low income communities in Chicago. Frequency tables were generated for Internet, cell phone, and social media use and preferences. Chi-squared analysis was used to evaluate differences across age and income groups. A total of 291 individuals participated and were predominantly female (69.0%). Majority reported incomes less than $30,000 (72.9%) and identified as African American/Black/Caribbean (49.3%) or Mexican/Mexican American (34.3%). Most participants regularly used smartphones (63.2%) and the Internet (75.9%). Respondents frequently used Facebook (84.8%), and less commonly used Instagram (43.6%), and Twitter (20.0%). Free Internet-based exercise programs were the most preferred method to increase PA levels (31.6%), while some respondents (21.0%) thought none of the surveyed technology applications would help. Cell phone, Internet, and social media use is common among the surveyed underserved population. Technology preferences to increase PA levels varied, with a considerable number of respondents not preferring the surveyed technology platforms. Creating educational opportunities to increase awareness may maximize the effectiveness of technology-based PA interventions.

  13. Investigation of the physical and mechanical properties of Shea Tree ...

    African Journals Online (AJOL)

    Investigation of the physical and mechanical properties of Shea Tree timber ( Vitellaria paradoxa ) used for structural applications in Kwara State, Nigeria. ... strength parallel to grain of 24.7 (N/mm2), compressive strength perpendicular to grain of 8.99 (N/mm2), shear strength of 2.01 (N/mm2), and tensile strength parallel to ...

  14. Physical activity and exercise training in multiple sclerosis: a review and content analysis of qualitative research identifying perceived determinants and consequences.

    Science.gov (United States)

    Learmonth, Yvonne C; Motl, Robert W

    2016-01-01

    This systematic review was conducted to provide rich and deep evidence of the perceived determinants and consequences of physical activity and exercise based on qualitative research in multiple sclerosis (MS). Electronic databases and article reference lists were searched to identify qualitative studies of physical activity and exercise in MS. Studies were included if they were written in English and examined consequences/determinants of physical activity in persons with MS. Content analysis of perceived determinants and consequences of physical activity and exercise was undertaken using an inductive analysis guided by the Physical Activity for people with Disabilities framework and Social Cognitive Theory, respectively. Nineteen articles were reviewed. The most commonly identified perceived barriers of physical activity and exercise were related to the environmental (i.e. minimal or no disabled facilities, and minimal or conflicting advice from healthcare professionals) and related to personal barriers (i.e. fatigue, and fear and apprehension). The most commonly identified perceived facilitators of physical activity were related to the environment (i.e. the type of exercise modality and peer support) and related to personal facilitators (i.e. appropriate exercise and feelings of accomplishment). The most commonly identified perceived beneficial consequences of physical activity and exercise were maintaining physical functions, increased social participation and feelings of self-management and control. The most commonly identified perceived adverse consequences were increased fatigue and feelings of frustration and lost control. Results will inform future research on the perceived determinants and consequences of physical activity and exercise in those with MS and can be adopted for developing professional education and interventions for physical activity and exercise in MS. Physical activity and exercise behaviour in people with multiple sclerosis (MS) is subject

  15. Identifying and Addressing Student Difficulties and Misconceptions: Examples from Physics and from Materials Science and Engineering

    Science.gov (United States)

    Rosenblatt, Rebecca

    2012-01-01

    Here I present my work identifying and addressing student difficulties with several materials science and physics topics. In the first part of this thesis, I present my work identifying student difficulties and misconceptions about the directional relationships between net force, velocity, and acceleration in one dimension. This is accomplished…

  16. Mechanism by which BMI influences leisure-time physical activity behavior.

    Science.gov (United States)

    Godin, Gaston; Bélanger-Gravel, Ariane; Nolin, Bertrand

    2008-06-01

    The objective of this prospective study was to clarify the mechanism by which BMI influences leisure-time physical activity. This was achieved in accordance with the assumptions underlying the Theory of Planned Behavior (TPB), considered as one of the most useful theories to predict behavior adoption. At baseline, a sample of 1,530 respondents completed a short questionnaire to measure intention and perceived behavioral control (PBC), the two proximal determinants of behavior of TPB. Past behavior, sociodemographic variables, and weight and height were also assessed. The dependent variable, leisure-time physical activity was assessed 3 months later. Hierarchical multiple regression analyses revealed that BMI is a direct predictor of future leisure-time physical activity, not mediated by the variables of TPB. Additional hierarchical analyses indicated that BMI was not a moderator of the intention-behavior and PBC-behavior relationships. The results of this study suggest that high BMI is a significant negative determinant of leisure-time physical activity. This observation reinforces the importance of preventing weight gain as a health promotion strategy for avoiding a sedentary lifestyle.

  17. Quantum mechanics. Textbook on Theoretical Physics III. 5. ed.

    International Nuclear Information System (INIS)

    Fliessbach, Torsten

    2008-01-01

    This textbook gives an introduction to quantum mechanics, as it is presented at the university in the cycle ''Theoretical Physics''. Special care has the author put om a well readable, understandable, and clearly arranged presentation, so that the reader can it reproduce without greater difficulties. By the partition into chapters, which form self-contained teaching units, and the kind of presentation the book is also very well suited for bachelor courses. Quantum mechanics is first introduced in form of Schroedinger's wave mechanics. The fundamental relations and their interpretation are thereby explained hand in hand with examples and first applications. In the following parts the most important applications of the Schroedinger equation are studied, as the alpha decay, the scattering of particles on a potential, and the hydrogen atom. Thereafter the abstract formulation of quantum mechanics (Hilbert space) is introduced in analogy to the known structure of the vector space. This formulation is applied to concrete problems, as the oscillator, the angular momentum, and the spin. The most important approximation methods of quantum mechanics are then summarized. In the final part about many-particle systems the ideal Fermi gas is treated; simple application of this model in atomic, solid-state,and astrophysics are discussed

  18. Basic course theoretical physics. Vol. 5/1. Quantum mechanics - foundations. 7. upd. ed.

    International Nuclear Information System (INIS)

    Nolting, Wolfgang

    2009-01-01

    The favoured basic course theoretical physics covers in seven volumes all fields relevant for the diploma. Each volume mediates well thought the in each semester necessary theoretically-physical tools. Numerous exercise problem with extensive solutions serve for the deepening of the matter. The first part of the fifth volume begins with an inductive foundation of quantum mechanics in order to illustrate after a study and summary of the formal foundations of quantum mechanics on simple model systems the concepts and term formations. The present new edition was fundamentally worked out and supplemented. The meanwhile proved two-color presentation allows a very understandable and fast approach to the matter [de

  19. Development and Application of Diagnostic Test to Identify Students' Misconceptions of Quantum Physics

    International Nuclear Information System (INIS)

    Halim, A.A.; Meerah, T.S.; Lilia Halim

    2009-01-01

    A study on students' misconceptions on quantum physics is rarely being done, because the target audience is quite small. It is important to understand quantum physics concepts correctly especially for science students. This study was under taken to help students identify their misconceptions at the early stage. The aim of this study is to develop a diagnostic test which can access the students' misconceptions, and use the findings for the benefits of quantum physics courses. A multiple-choice Quantum Physics Diagnostic Test (QPDT), that involves concepts of light, atomic model, particle-wave dualism, wave function, and potential energy, was administered to 200 university students. The results shows that many students use the classical concepts to describe the quantum phenomenon. For example students describe light only as a wave, an electron only as a particle, and that the atomic structure is parallel to the solar system. To overcome these problems, it is suggested that lecturers spend more time in explaining the basic definitions and using analogies in quantum physics teaching. (author)

  20. Physical and mechanical properties of self-compacting concrete containing superplasticizer and metakaolin

    Science.gov (United States)

    Shahidan, Shahiron; Tayeh, Bassam A.; Jamaludin, A. A.; Bahari, N. A. A. S.; Mohd, S. S.; Zuki Ali, N.; Khalid, F. S.

    2017-11-01

    The development of concrete technology shows a variety of admixtures in concrete to produce special concrete. This includes the production of self-compacting concrete which is able to fill up all spaces, take formwork shapes and pass through congested reinforcement bars without vibrating or needing any external energy. In this study, the main objective is to compare the physical and mechanical properties of self-compacting concrete containing metakaolin with normal concrete. Four types of samples were produced to study the effect of metakaolin towards the physical and mechanical properties of self-compacting concrete where 0%, 5%, 10% and 15% of metakaolin were used as cement replacement. The physical properties were investigated using slump test for normal concrete and slump flow test for self-compacting concrete. The mechanical properties were tested for compressive strength and tensile strength. The findings of this study show that the inclusion of metakaolin as cement replacement can increase both compressive and tensile strength compared to normal concrete. The highest compressive strength was found in self-compacting concrete with 15% metakaolin replacement at 53.3 MPa while self-compacting concrete with 10% metakaolin replacement showed the highest tensile strength at 3.6 MPa. On top of that, the finishing or concrete surface of both cube and cylinder samples made of self-compacting concrete produced a smooth surface with the appearance of less honeycombs compared to normal concrete.

  1. Physical and mechanical testing of essential oil-embedded cellulose ester films

    Science.gov (United States)

    Polymer films made from cellulose esters are useful for embedding plant essential oils, either for food packaging or air freshener applications. Studies and testing were done on the physical and mechanical properties of cellulose ester-based films incorporating essential oils (EO) from lemongrass (C...

  2. Experimental identification for physical mechanism of fiber-form nanostructure growth on metal surfaces with helium plasma irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Takamura, S., E-mail: takamura@aitech.ac.jp [Faculty of Engineering, Aichi Institute of Technology, Yakusa-cho, Toyota 470-0392 (Japan); Uesugi, Y. [Faculty of Electrical and Computer Engineering, Institute of Science and Engineering, Kanazawa University, Kanazawa 920-1192 (Japan)

    2015-11-30

    Highlights: • Initial growth process of fiber-form nanostructure on metal surfaces under helium ion irradiation is given based on experimental knowledge, where the pitting of original surface and forming nano-walls and/or loop-like nanostructure works as precursors. • The physical mechanism of fiber growth is discussed in terms of shear modulus of metals influenced by helium content as well as surface temperature. • The physical model explains the reason why tantalum does not make sufficiently grown nano-fibers, and the temperature dependence of surface morphology of titanium. - Abstract: The initial stage of fiber-form nanostructure growth on metal surface with helium plasma irradiation is illustrated, taking recent research knowledge using a flux gradient technique, and including loop-like nano-scale structure as precursors. The growth mechanism of fibers is discussed in terms of the shear modulus of various materials that is influenced by the helium content as well as the surface temperature, and the mobility of helium atoms, clusters and/or nano-bubbles in the bulk, loops and fibers. This model may explain the reason why tantalum does not provide fiber-form nanostructure although the loop-like structure was identified. The model also suggests the mechanism of an existence of two kinds of nanostructure of titanium depending on surface temperature. Industrial applications of such nanostructures are suggested in the properties and the possibilities of its growth on other basic materials.

  3. Perspectives in Quantum Physics: Epistemological, Ontological and Pedagogical--An Investigation into Student and Expert Perspectives on the Physical Interpretation of Quantum Mechanics, with Implications for Modern Physics Instruction

    Science.gov (United States)

    Baily, Charles Raymond

    2011-01-01

    A common learning goal for modern physics instructors is for students to recognize a difference between the experimental uncertainty of classical physics and the fundamental uncertainty of quantum mechanics. Our studies suggest this notoriously difficult task may be frustrated by the intuitively "realist" perspectives of introductory…

  4. [Research Progress on the Interaction Effects and Its Neural Mechanisms between Physical Fatigue and Mental Fatigue].

    Science.gov (United States)

    Zhang, Lixin; Zhang, Chuncui; He, Feng; Zhao, Xin; Qi, Hongzhi; Wan, Baikun; Ming, Dong

    2015-10-01

    Fatigue is an exhaustion state caused by prolonged physical work and mental work, which can reduce working efficiency and even cause industrial accidents. Fatigue is a complex concept involving both physiological and psychological factors. Fatigue can cause a decline of concentration and work performance and induce chronic diseases. Prolonged fatigue may endanger life safety. In most of the scenarios, physical and mental workloads co-lead operator into fatigue state. Thus, it is very important to study the interaction influence and its neural mechanisms between physical and mental fatigues. This paper introduces recent progresses on the interaction effects and discusses some research challenges and future development directions. It is believed that mutual influence between physical fatigue and mental fatigue may occur in the central nervous system. Revealing the basal ganglia function and dopamine release may be important to explore the neural mechanisms between physical fatigue and mental fatigue. Future effort is to optimize fatigue models, to evaluate parameters and to explore the neural mechanisms so as to provide scientific basis and theoretical guidance for complex task designs and fatigue monitoring.

  5. How Monte Carlo heuristics aid to identify the physical processes of drug release kinetics.

    Science.gov (United States)

    Lecca, Paola

    2018-01-01

    We implement a Monte Carlo heuristic algorithm to model drug release from a solid dosage form. We show that with Monte Carlo simulations it is possible to identify and explain the causes of the unsatisfactory predictive power of current drug release models. It is well known that the power-law, the exponential models, as well as those derived from or inspired by them accurately reproduce only the first 60% of the release curve of a drug from a dosage form. In this study, by using Monte Carlo simulation approaches, we show that these models fit quite accurately almost the entire release profile when the release kinetics is not governed by the coexistence of different physico-chemical mechanisms. We show that the accuracy of the traditional models are comparable with those of Monte Carlo heuristics when these heuristics approximate and oversimply the phenomenology of drug release. This observation suggests to develop and use novel Monte Carlo simulation heuristics able to describe the complexity of the release kinetics, and consequently to generate data more similar to those observed in real experiments. Implementing Monte Carlo simulation heuristics of the drug release phenomenology may be much straightforward and efficient than hypothesizing and implementing from scratch complex mathematical models of the physical processes involved in drug release. Identifying and understanding through simulation heuristics what processes of this phenomenology reproduce the observed data and then formalize them in mathematics may allow avoiding time-consuming, trial-error based regression procedures. Three bullet points, highlighting the customization of the procedure. •An efficient heuristics based on Monte Carlo methods for simulating drug release from solid dosage form encodes is presented. It specifies the model of the physical process in a simple but accurate way in the formula of the Monte Carlo Micro Step (MCS) time interval.•Given the experimentally observed curve of

  6. Heart rate biofeedback fails to enhance children's ability to identify time spent in moderate to vigorous physical activity.

    Science.gov (United States)

    Conley, Marguerite M; Gastin, Paul B; Brown, Helen; Shaw, Christine

    2011-03-01

    Physical activity recommendations for children in several countries advise that all young people should accumulate at least 60 min of moderate to vigorous physical activity every day. Perceiving physical activity intensity, however, can be a difficult task for children and it is not clear whether children can identify their levels of moderate to vigorous physical activity in accordance with the recommended guidelines. This study aimed to (1) explore whether children can identify time spent in moderate to vigorous physical activity; and (2) investigate whether heart rate biofeedback would improve children's ability to estimate time spent in moderate to vigorous physical activity. Thirty seven children (15 boys and 22 girls, mean age 12.6 years) wore data recording Polar E600 heart rate monitors during eight physical education lessons. At the end of each lesson children's estimated time in zone was compared to their actual time in zone. During a six lesson Intervention phase, one class was assigned to a biofeedback group whilst the other class acted as the control group and received no heart rate biofeedback. Post-Intervention, students in the biofeedback group were no better than the control group at estimating time spent in zone (mean relative error of estimation biofeedback group: Pre-Intervention 41±32% to Post-Intervention 28±26%; control group: Pre-Intervention 40±39% to Post-Intervention 31±37%). Thus it seems that identifying time spent in moderate to vigorous physical activity remains a complex task for children aged 11-13 even with the help of heart rate biofeedback. Copyright © 2010 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  7. Understanding low levels of physical activity in people with intellectual disabilities : A systematic review to identify barriers and facilitators

    NARCIS (Netherlands)

    Bossink, Leontien; van der Putten, Annette; Vlaskamp, Carla

    2017-01-01

    Background: People with intellectual disabilities (ID) undertake extremely low levels of physical activity. Aims: To enhance understanding concerning low levels of physical activity in people with ID, this study has three aims: (1) to identify barriers to and facilitators of physical activity in

  8. Identifying the Physical Properties of Showers That Influence User Satisfaction to Aid in Developing Water-Saving Showers

    Directory of Open Access Journals (Sweden)

    Minami Okamoto

    2015-07-01

    Full Text Available This research was conducted with the goal of clarifying the required conditions of water-saving showerheads. In order to this, the research analyzes the mutual relationship between water usage flow, the level of satisfaction and the physical properties of spray of showerheads. The physical properties of spray were measured using physical properties test apparatus of standard or scheme for water-saving showerheads issued in several water-saving countries, and satisfaction evaluation data was acquired through bathing experiments. The evaluated showerheads were separated into three groups according to usage water flow and the level of satisfaction. The relationships between usage water flow, the level of satisfaction and physical properties were compared. The results identified that Spray Force and Spray Force-per-Hole were physical properties that influence usage water flow. Spray force-per-hole, water volume ratio in Spray Patterns within φ 100 and φ 150, Temperature Drop and Spray Angle were identified as physical properties that influenced the level of satisfaction. The level of satisfaction and usage water flow has a spurious correlation through the physical properties of Spray Force-per-Hole and Temperature Drop. It is possible to improve the level of satisfaction independent of amount of water usage through designs that set an appropriate value for water volume ratio and Spray Angle for Spray Patterns within φ 100 and φ 150.

  9. Forcefields based molecular modeling on the mechanical and physical properties of emeraldine base polyaniline

    NARCIS (Netherlands)

    Chen, X.; Yuan, C.A.; Wong, K.Y.; Zhang, G.Q.

    2010-01-01

    Molecular dynamics (MD) and molecular mechanical (MM) analysis are carried out to provide reliable and accurate model for emeraldine base polyaniline. This study validate the forcefields and model with the physical and mechanical properties of the polyaniline. The temperature effects on non-bond

  10. Microstructure and physical properties of mechanically alloyed Fe-Mo powder

    Czech Academy of Sciences Publication Activity Database

    Jirásková, Yvonna; Zábranský, Karel; Turek, Ilja; Buršík, Jiří; Jančík, D.

    2009-01-01

    Roč. 477, - (2009), s. 55-61 ISSN 0925-8388 R&D Projects: GA ČR GA202/05/2111; GA ČR GD106/05/H008 Institutional research plan: CEZ:AV0Z20410507 Keywords : Nanostructured materials * Mechanical alloying * Microstructure * Magnetic measurements * Mössbauer spectroscopy Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.135, year: 2009

  11. Time with friends and physical activity as mechanisms linking obesity and television viewing among youth.

    Science.gov (United States)

    Vandewater, Elizabeth A; Park, Seoung Eun; Hébert, Emily T; Cummings, Hope M

    2015-07-27

    Though bivariate relationships between childhood obesity, physical activity, friendships and television viewing are well documented, empirical assessment of the extent to which links between obesity and television may be mediated by these factors is scarce. This study examines the possibility that time with friends and physical activity are potential mechanisms linking overweight/obesity to television viewing in youth. Data were drawn from children ages 10-18 years old (M = 13.81, SD = 2.55) participating in the 2002 wave of Child Development Supplement (CDS) to the Panel Study of Income Dynamics (PSID) (n = 1,545). Data were collected both directly and via self-report from children and their parents. Path analysis was employed to examine a model whereby the relationships between youth overweight/obesity and television viewing were mediated by time spent with friends and moderate-to-vigorous physical activity (MVPA). Overweight/obesity was directly related to less time spent with friends, but not to MVPA. Time spent with friends was directly and positively related to MVPA, and directly and negatively related to time spent watching television without friends. In turn, MVPA was directly and negatively related to watching television without friends. There were significant indirect effects of both overweight/obesity and time with friends on television viewing through MVPA, and of overweight/obesity on MVPA through time with friends. Net of any indirect effects, the direct effect of overweight/obesity on television viewing remained. The final model fit the data extremely well (χ2 = 5.77, df = 5, ptelevision viewing in youth. These findings highlight the importance of moving from examinations of bivariate relationships between weight status and television viewing to more nuanced explanatory models which attempt to identify and unpack the possible mechanisms linking them.

  12. Identifying partial topology of complex dynamical networks via a pinning mechanism

    Science.gov (United States)

    Zhu, Shuaibing; Zhou, Jin; Lu, Jun-an

    2018-04-01

    In this paper, we study the problem of identifying the partial topology of complex dynamical networks via a pinning mechanism. By using the network synchronization theory and the adaptive feedback controlling method, we propose a method which can greatly reduce the number of nodes and observers in the response network. Particularly, this method can also identify the whole topology of complex networks. A theorem is established rigorously, from which some corollaries are also derived in order to make our method more cost-effective. Several numerical examples are provided to verify the effectiveness of the proposed method. In the simulation, an approach is also given to avoid possible identification failure caused by inner synchronization of the drive network.

  13. Mutual associations among microstructural, physical and mechanical properties of human cancellous bone

    DEFF Research Database (Denmark)

    Ding, Ming; Odgaard, A; Danielsen, CC

    2002-01-01

    structure and mechanical properties. In this study, 160 cancellous bone specimens were produced from 40 normal human tibiae aged from 16 to 85 years at post-mortem. The specimens underwent micro-CT and the microstructural properties were calculated using unbiased three-dimensional methods. The specimens...... were tested to determine the mechanical properties and the physical/compositional properties were evaluated. The type of structure together with anisotropy correlated well with Young's modulus of human tibial cancellous bone. The plate-like structure reflected high mechanical stress and the rod......-like structure low mechanical stress. There was a strong correlation between the type of trabecular structure and the bone-volume fraction. The most effective microstructural properties for predicting the mechanical properties of cancellous bone seem to differ with age....

  14. The correlational research on the physical mechanical indexes of typical soil collecting from the Xu Wei Lianyungang port

    Science.gov (United States)

    Liu, Wenbin; Wang, Yuanzhan; Liu, Aimin

    2017-11-01

    The tests on the physical mechanical indexes of the reclaimed soft clay are necessary to be done before the foundation strengthening treatment. This paper focus on the study of correlational relationship between the physical mechanical indexes, such as the natural water content, the void ratio, the liquid limit etc., by fitting the data of model test on samples collecting from the Xu Wei Lianyungang port. The linear relationship fitting curve of the physical mechanical indexes is proposed, and these results support the high efficient operation in engineering practice.

  15. Physics. Examples and problems. Mechanics, heat, electricity and magnetism, oscillations and waves, atomic and nuclear physics

    International Nuclear Information System (INIS)

    Stroppe, Heribert; Streitenberger, Peter; Specht, Eckard; Zeitler, Juergen; Langer, Heinz

    2017-01-01

    The present book is the unification of the proved problem collections for the basic physical training of studyings of especially engineering courses at technical colleges and universities. The book contains - didactically prepared and structured in the style of a textbook as well as with increasing difficulty - a total of 960 exemplary and additional tasks from the fields mechanics, heat, electricity and magnetism, oscillations and waves, as well as atomic and nuclear physics. For the exemplary problems the whole solution path and the complete calculation process with explanation of the relevant physical laws are extensively presented, for the additional problems for the self-control only the solutions and, if necessary, intermediate calculations are given. The examples and problems with mostly practice-oriented content are selected in such a way that they largely cover the matter treated in courses and exercises and make by their didactical preparation an effective repetition and optimal examination-preparation possible.

  16. Study on Physical Mechanism of the Magnus Effect

    Science.gov (United States)

    Maruyama, Yuichi

    Two kinds of methods of explaining the physical mechanism of the Magnus effect are compared with each other and fully discussed. The first method uses Bernoulli's theorem and the fluid velocity difference between both sides of the body. The second one is based on the momentum theorem which relates the lift force with the fluid acceleration perpendicular to the uniform flow direction, which is caused by the asymmetry of separation points. It is shown that the latter method is preferable because it can be strictly applied to the real flow field containing both the rotational and the irrotational flow regions.

  17. Logical reformulation of quantum mechanics. IV. Projectors in semiclassical physics

    International Nuclear Information System (INIS)

    Omnes, R.

    1989-01-01

    This is a technical paper providing the proofs of three useful theorems playing a central role in two kinds of physical applications: an explicit logical and mathematical formulation of the interpretation of quantum mechanics and the corresponding description of irreversibility. The Appendix contains a brief mathematical introduction to microlocal analysis. Three theorems are derived in the text: (A) Associating a projector in Hilbert space with a macroscopic regular cell in classical phase space. (B) Specifying the algebra of the projectors associated with different cells. (C) Showing the connection between the classical motion of cells and the Schroedinger evolution of projectors for a class of regular Hamiltonians corresponding approximately to deterministic systems as described within the framework of quantum mechanics. Applications to the interpretation of quantum mechanics are given and the consequences for irreversibility will be given later

  18. Physical Mechanisms Responsible for Electrical Conduction in Pt/GaN Schottky Diodes

    OpenAIRE

    H. MAZARI; K. AMEUR; N. BENSEDDIK; Z. BENAMARA; R. KHELIFI; M. MOSTEFAOUI; N. ZOUGAGH; N. BENYAHYA; R. BECHAREF; G. BASSOU; B. GRUZZA; J. M. BLUET; C. BRU-CHEVALLIER

    2014-01-01

    The current-voltage (I-V) characteristics of Pt/(n.u.d)-GaN and Pt/Si-doped-GaN diodes Schottky are investigated. Based on these measurements, physical mechanisms responsible for electrical conduction have been suggested. The contribution of thermionic-emission current and various other current transport mechanisms were assumed when evaluating the Schottky barrier height. Thus the generation-recombination, tunneling and leakage currents caused by inhomogeneities and defects at metal-semicondu...

  19. Quantum mechanics. Textbook on theoretical physics III. 4. rev. ed.

    International Nuclear Information System (INIS)

    Fliessbach, T.

    2005-01-01

    This textbook present an intoduction to quantum mechanics, as it is offerred at the university in the cycle ''Theoretical Physics''. Special value has the author put on a well readable, understandable, and surveyable representation, so that the reader it can reproduce without larger difficulties. By the partition into chapters, which form separated course units, and the kind of the representation the book is also suited for bachelor curricula. The quantum mechanics are first introduced in the form of Schroedinge's wave mechanics. The fundamental relations of quantum mechanics and their interpretation are thereby explained by means of examples and first applications. In the following chapters the most important applications of the Schroedinger equation are studied, like the alpha decay, the scattering of a particle on a potential, and the hydrogen atom. Thereafter the abstract formulation of quantum mechanics (Hilbert space) is introduced in analogy to the known structure of the vector space. This formulation is then applied to concrete problems like the oscillator, tha angular momentum, and the spin. The most important approximation methods of quantum mechanics are then summarized. In the concluding part about many-particle systems the ideal Fermi gas is treated; simple applications of this model in atomic, solid-state, nuclear, ans astrophysics are discussed

  20. Experimental analysis on physical and mechanical properties of thermal shock damage of granite

    Directory of Open Access Journals (Sweden)

    He Xiao

    2017-01-01

    Full Text Available The purpose of this study was to explore the changes of mechanical and physical properties of granite under different thermal loading effects. Uniaxial compression experiments studying the rules of the influence of temperature load on mechanical properties of granite were carried out. After high-temperature heating at above 600 °C, granite tended to have stronger ductility and plasticity as well as declined peak stress and compressive strength. Thermogravimetry - differential scanning calorimetry (TG-DSC analysis results showed that, thermal load at different temperatures induced reactions such as water loss, oxidation and crystallization in the microstructure of granite, which led to physical changes of granite. Hence it is concluded that, heating can significantly weaken the mechanical performance of granite, which provides an important support for the optimization of heating assisted processing of granite. It also reveals that, heating assisted cutting technique can effectively lower energy consumption and improve processing efficiency.

  1. Identifying potential dropouts from college physics classes

    Science.gov (United States)

    Wollman, Warren; Lawrenz, Frances

    Hudson and Rottman (1981) established that mathematics ability is probably a secondary factor influencing dropout from college physics courses. Other factors remain to be found for predicting who will drop out or at least have difficulty with the course. When mathematics ability is coupled with general indicators of performance (total GPA and ACT natural science), prediction of performance for those who complete the course is substantially improved. Moreover, discriminant analyses reveal who will have at least some difficulty, but not who will drop out. The problem of isolating specific weaknesses of students who have difficulty persists. Physics achievement appears to depend on mathematics ability only to the extent that students possess the ability to utilize mathematics knowledge for solving physics problems. Identification of the specific aspects of this ability as well as the specific deficiencies leading to dropout should be the object of future research. For the present, interviews might be more revealing than group testing methods.

  2. Role of differential physical properties in the collective mechanics and dynamics of tissues

    Science.gov (United States)

    Das, Moumita

    Living cells and tissues are highly mechanically sensitive and active. Mechanical stimuli influence the shape, motility, and functions of cells, modulate the behavior of tissues, and play a key role in several diseases. In this talk I will discuss how collective biophysical properties of tissues emerge from the interplay between differential mechanical properties and statistical physics of underlying components, focusing on two complementary tissue types whose properties are primarily determined by (1) the extracellular matrix (ECM), and (2) individual and collective cell properties. I will start with the structure-mechanics-function relationships in articular cartilage (AC), a soft tissue that has very few cells, and its mechanical response is primarily due to its ECM. AC is a remarkable tissue: it can support loads exceeding ten times our body weight and bear 60+ years of daily mechanical loading despite having minimal regenerative capacity. I will discuss the biophysical principles underlying this exceptional mechanical response using the framework of rigidity percolation theory, and compare our predictions with experiments done by our collaborators. Next I will discuss ongoing theoretical work on how the differences in cell mechanics, motility, adhesion, and proliferation in a co-culture of breast cancer cells and healthy breast epithelial cells may modulate experimentally observed differential migration and segregation. Our results may provide insights into the mechanobiology of tissues with cell populations with different physical properties present together such as during the formation of embryos or the initiation of tumors. This work was partially supported by a Cottrell College Science Award.

  3. Mechanism-based classification and physical therapy management of persons with cancer pain: A prospective case series

    Directory of Open Access Journals (Sweden)

    Senthil P Kumar

    2013-01-01

    Full Text Available Context: Mechanism-based classification (MBC was established with current evidence and physical therapy (PT management methods for both cancer and for noncancer pain. Aims: This study aims to describe the efficacy of MBC-based PT in persons with primary complaints of cancer pain. Settings and Design: A prospective case series of patients who attended the physiotherapy department of a multispecialty university-affiliated teaching hospital. Material and Methods: A total of 24 adults (18 female, 6 male aged 47.5 ± 10.6 years, with primary diagnosis of heterogeneous group of cancer, chief complaints of chronic disabling pain were included in the study on their consent for participation The patients were evaluated and classified on the basis of five predominant mechanisms for pain. Physical therapy interventions were recommended based on mechanisms identified and home program was prescribed with a patient log to ensure compliance. Treatments were given in five consecutive weekly sessions for five weeks each of 30 min duration. Statistical Analysis Used: Pre-post comparisons for pain severity (PS and pain interference (PI subscales of Brief pain inventory-Cancer pain (BPI-CP and, European organization for research and treatment in cancer-quality of life questionnaire (EORTC-QLQ-C30 were done using Wilcoxon signed-rank test at 95% confidence interval using SPSS for Windows version 16.0 (SPSS Inc, Chicago, IL. Results: There were statistically significant ( P < 0.05 reduction in pain severity, pain interference and total BPI-CP scores, and the EORTC-QLQ-C30. Conclusion: MBC-PT was effective for improving BPI-CP and EORTC-QLQ-C30 scores in people with cancer pain.

  4. Quantum mechanics. Textbook for students of physics, mathematics and physical chemistry. Quantenmechanik. Studienbuch fuer Studierende der Physik, Mathematik und Physikalischen Chemie

    Energy Technology Data Exchange (ETDEWEB)

    Grawert, G. (Marburg Univ. (Germany, F.R.). Fachbereich 13 - Physik)

    1989-01-01

    The aim of the textbook now present in fifth edition is the representation of the fundamental physical concepts of the theory of quantum mechanics. It is confined to the nonrelativistic quantum mechanics; however also themes are treated which are in an extended form important just for quantum field theory up to the modern development. (orig.) With 22 figs.

  5. Can Quantum-Mechanical Description of Physical Reality Be Considered Correct?

    Science.gov (United States)

    Brassard, Gilles; Méthot, André Allan

    2010-04-01

    In an earlier paper written in loving memory of Asher Peres, we gave a critical analysis of the celebrated 1935 paper in which Einstein, Podolsky and Rosen (EPR) challenged the completeness of quantum mechanics. There, we had pointed out logical shortcomings in the EPR paper. Now, we raise additional questions concerning their suggested program to find a theory that would “provide a complete description of the physical reality”. In particular, we investigate the extent to which the EPR argumentation could have lead to the more dramatic conclusion that quantum mechanics is in fact incorrect. With this in mind, we propose a speculation, made necessary by a logical shortcoming in the EPR paper caused by the lack of a necessary condition for “elements of reality”, and surmise that an eventually complete theory would either be inconsistent with quantum mechanics, or would at least violate Heisenberg’s Uncertainty Principle.

  6. Topical thermal therapy with hot packs suppresses physical inactivity-induced mechanical hyperalgesia and up-regulation of NGF.

    Science.gov (United States)

    Nakagawa, Tatsuki; Hiraga, Shin-Ichiro; Mizumura, Kazue; Hori, Kiyomi; Ozaki, Noriyuki; Koeda, Tomoko

    2017-10-12

    We focused on the analgesic effect of hot packs for mechanical hyperalgesia in physically inactive rats. Male Wistar rats were randomly divided into four groups: control, physical inactivity (PI), PI + sham treatment (PI + sham), and PI + hot pack treatment (PI + hot pack) groups. Physical inactivity rats wore casts on both hind limbs in full plantar flexed position for 4 weeks. Hot pack treatment was performed for 20 min a day, 5 days a week. Although mechanical hyperalgesia and the up-regulation of NGF in the plantar skin and gastrocnemius muscle were observed in the PI and the PI + sham groups, these changes were significantly suppressed in the PI + hot pack group. The present results clearly demonstrated that hot pack treatment was effective in reducing physical inactivity-induced mechanical hyperalgesia and up-regulation of NGF in plantar skin and gastrocnemius muscle.

  7. Bioresorption mechanisms of chitosan physical hydrogels: A scanning electron microscopy study

    International Nuclear Information System (INIS)

    Malaise, Sébastien; Rami, Lila; Montembault, Alexandra; Alcouffe, Pierre; Burdin, Béatrice; Bordenave, Laurence; Delmond, Samantha; David, Laurent

    2014-01-01

    Tissue-engineered biodegradable medical devices are widely studied and systems must present suitable balance between versatility and elaboration simplicity. In this work, we aim at illustrating that such equilibrium can be found by processing chitosan physical hydrogels without external cross-linker. Chitosan concentration, degree of acetylation, solvent composition, and neutralization route were modulated in order to obtain hydrogels exhibiting different physico-chemical properties. The resulting in vivo biological response was investigated by scanning electron microscopy. “Soft” hydrogels were obtained from chitosan of high degree of acetylation (35%) and by the neutralization with gaseous ammonia of a chitosan acetate aqueous solutions presenting low polymer concentration (Cp = 1.6% w/w). “Harder” hydrogels were obtained from chitosan with lower degree of acetylation (5%) and after neutralization in sodium hydroxide bath (1 M) of hydro-alcoholic chitosan solutions (50/50 w/w water/1,2-propanediol) with a polymer concentration of 2.5% w/w. Soft and hard hydrogels exhibited bioresorption times from below 10 days to higher than 60 days, respectively. We also evidenced that cell colonization and neo-vascularization mechanisms depend on the hydrogel-aggregated structure that is controlled by elaboration conditions and possibly in relation with mechanical properties. Specific processing conditions induced micron-range capillary formation, which can be assimilated to colonization channels, also acting on the resorption scenario. - Highlights: • We elaborated physical chitosan hydrogels presenting tuneable biological properties. • Cell colonization mechanism depends on biological and mechanical hydrogel properties. • Increasing the degree of acetylation will reduce the bioresorption time. • Capillaries played a role of cell colonization pathways

  8. Bioresorption mechanisms of chitosan physical hydrogels: A scanning electron microscopy study

    Energy Technology Data Exchange (ETDEWEB)

    Malaise, Sébastien, E-mail: sebastien.malaise@gmail.com [Université de Lyon, Université Claude Bernard Lyon 1, CNRS, Ingénierie des Matériaux Polymères (IMP-UMR 5223), 15 Boulevard Latarjet, 69622 Villeurbanne Cedex (France); Rami, Lila [Université de Bordeaux, Bordeaux 33000 (France); Inserm U1026, Bioingénierie Tissulaire, Bordeaux 33000 (France); Montembault, Alexandra; Alcouffe, Pierre [Université de Lyon, Université Claude Bernard Lyon 1, CNRS, Ingénierie des Matériaux Polymères (IMP-UMR 5223), 15 Boulevard Latarjet, 69622 Villeurbanne Cedex (France); Burdin, Béatrice [Université de Lyon, Université Claude Bernard Lyon 1, Centre Technologique des Microstructure, 69622 Villeurbanne Cedex (France); Bordenave, Laurence [Université de Bordeaux, Bordeaux 33000 (France); Inserm U1026, Bioingénierie Tissulaire, Bordeaux 33000 (France); CHU de Bordeaux, CIC-IT Biomaterials, F-33000 Bordeaux (France); Delmond, Samantha [CHU de Bordeaux, CIC-IT Biomaterials, F-33000 Bordeaux (France); David, Laurent [Université de Lyon, Université Claude Bernard Lyon 1, CNRS, Ingénierie des Matériaux Polymères (IMP-UMR 5223), 15 Boulevard Latarjet, 69622 Villeurbanne Cedex (France)

    2014-09-01

    Tissue-engineered biodegradable medical devices are widely studied and systems must present suitable balance between versatility and elaboration simplicity. In this work, we aim at illustrating that such equilibrium can be found by processing chitosan physical hydrogels without external cross-linker. Chitosan concentration, degree of acetylation, solvent composition, and neutralization route were modulated in order to obtain hydrogels exhibiting different physico-chemical properties. The resulting in vivo biological response was investigated by scanning electron microscopy. “Soft” hydrogels were obtained from chitosan of high degree of acetylation (35%) and by the neutralization with gaseous ammonia of a chitosan acetate aqueous solutions presenting low polymer concentration (Cp = 1.6% w/w). “Harder” hydrogels were obtained from chitosan with lower degree of acetylation (5%) and after neutralization in sodium hydroxide bath (1 M) of hydro-alcoholic chitosan solutions (50/50 w/w water/1,2-propanediol) with a polymer concentration of 2.5% w/w. Soft and hard hydrogels exhibited bioresorption times from below 10 days to higher than 60 days, respectively. We also evidenced that cell colonization and neo-vascularization mechanisms depend on the hydrogel-aggregated structure that is controlled by elaboration conditions and possibly in relation with mechanical properties. Specific processing conditions induced micron-range capillary formation, which can be assimilated to colonization channels, also acting on the resorption scenario. - Highlights: • We elaborated physical chitosan hydrogels presenting tuneable biological properties. • Cell colonization mechanism depends on biological and mechanical hydrogel properties. • Increasing the degree of acetylation will reduce the bioresorption time. • Capillaries played a role of cell colonization pathways.

  9. Some physical and mechanical properties of palm kernel shell (PKS ...

    African Journals Online (AJOL)

    In this study, some of the mechanical and physical properties of palm kernel shells (PKS) were evaluated. These are moisture content, 7.8325 ± 0.6672%; true density, 1.254 ± 5.292 x 10-3 g/cm3; bulk density, 1.1248g/cm3; mean rupture force along width, and thickness were 3174.52 ± 270.70N and 2806.94 ± 498.45N for ...

  10. Physical-mechanical characterization of hydroxyapatite-titanium oxide composites made by the polymeric sponge method

    International Nuclear Information System (INIS)

    Galdino, A.G.S.; Zavaglia, C.A.C.

    2011-01-01

    Bioceramics have been used as bone reconstruction materials since last decades, where hydroxyapatite is one of the most used for this purpose. However, hydroxyapatite's mechanical strength is not so high when compared to other bioceramics. This work aimed on characterizing physically and mechanically composites of HA-TiO_2. Samples were made by the polymeric sponge method with 70% - 30% wt., 60% - 40% wt. and 50% - 50% wt. of HA - TiO_2, calcined at 550 deg C for sponge burning and sintered at 1250 deg C, 1300 deg C and 1350 deg C. Samples were submitted to mechanical essays of compression and Hardness Vickers and to physical essays of water absorption, apparent density, burning linear retraction and apparent density. Results showed relatively better than those of pure hydroxyapatite and they are in accordance with the literature. (author)

  11. Transport Physics Mechanisms in Thin-Film Oxides.

    Science.gov (United States)

    Tierney, Brian D.; Hjalmarson, Harold P.; Jacobs-Gedrim, Robin B.; James, Conrad D.; Marinella, Matthew M.

    A physics-based model of electron transport mechanisms in metal-insulating oxide-metal (M-I-M) systems is presented focusing on transport through the metal-oxide interfaces and in the bulk of the oxide. Interface tunneling, such as electron tunneling between the metal and the conduction band, or to oxide defect states, is accounted for via a WKB model. The effects of thermionic emission are also included. In the bulk of the oxide, defect-site hopping is dominant. Corresponding continuum calculations are performed for Ta2O5 M-I-M systems utilizing two different metal electrodes, e.g., platinum and tantalum. Such an asymmetrical M-I-M structure, applicable to resistive memory applications or oxide-based capacitors, reveals that the current can be either bulk or interface limited depending on the bias polarity and concentration of oxygen vacancy defects. Also, the dominance of some transport mechanisms over others is shown to be due to a complex interdependence between the vacancy concentration and bias polarity. Sandia National Laboratories is a multi-mission laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

  12. A statistical–mechanical view on source coding: physical compression and data compression

    International Nuclear Information System (INIS)

    Merhav, Neri

    2011-01-01

    We draw a certain analogy between the classical information-theoretic problem of lossy data compression (source coding) of memoryless information sources and the statistical–mechanical behavior of a certain model of a chain of connected particles (e.g. a polymer) that is subjected to a contracting force. The free energy difference pertaining to such a contraction turns out to be proportional to the rate-distortion function in the analogous data compression model, and the contracting force is proportional to the derivative of this function. Beyond the fact that this analogy may be interesting in its own right, it may provide a physical perspective on the behavior of optimum schemes for lossy data compression (and perhaps also an information-theoretic perspective on certain physical system models). Moreover, it triggers the derivation of lossy compression performance for systems with memory, using analysis tools and insights from statistical mechanics

  13. Testing principle working mechanisms of the health action process approach for subjective physical age groups.

    Science.gov (United States)

    Wienert, Julian; Kuhlmann, Tim; Fink, Sebastian; Hambrecht, Rainer; Lippke, Sonia

    2016-01-01

    This study investigated differences in social-cognitive predictors and self-regulatory planning, as proposed by the health action process approach (HAPA), across three different subjective physical age groups for physical activity. With a cross-sectional design, 521 participants across the chronological age span from 25 to 86 years (M = 48.79; SD = 12.66) were separated into three groups: those who feel physically younger than they are in terms of chronological age, the same perceived and chronological age, and feeling physically older compared to their chronological age. Participants were assessed regarding their perceived vulnerability, outcome expectancies, general intentions, planning, self-efficacy, and stages of physical activity (non-intenders, intenders, and actors). Data were analysed via mean comparison and multigroup structural equation modelling. Mean differences for all but one construct were eminent in all groups, generally showing that those feeling physically younger also report better social-cognitive predictors of physical activity (e.g. lower perceived vulnerability) in comparison to those who feel the same age or older. The model showed that basic working mechanisms of the HAPA can be applied to all groups. With that, the results provide for the first time evidence that principle working mechanism of the HAPA can be applied to all subjective physical age groups. These may be used to tailor health promoting interventions according to participants' needs as a more suitable proxy than chronological age.

  14. Nonmaxwell relaxation in disordered media: Physical mechanisms and fractional relaxation equations

    International Nuclear Information System (INIS)

    Arkhincheev, V.E.

    2004-12-01

    The problem of charge relaxation in disordered systems has been solved. It is shown, that due to the inhomogeneity of the medium the charge relaxation has a non-Maxwell character. The two physical mechanisms of a such behavior have been founded. The first one is connected with the 'fractality' of conducting ways. The second mechanism of nonexponential non-Maxwell behavior is connected with the frequency dispersion of effective conductivity of heterogeneous medium, initially consisting of conducting phases without dispersion. The new generalized relaxation equations in the form of fractional temporal integro-differential equations are deduced. (author)

  15. 41 CFR 102-85.175 - Are the standard level services for cleaning, mechanical operation, and maintenance identified in...

    Science.gov (United States)

    2010-07-01

    ... services for cleaning, mechanical operation, and maintenance identified in an OA? 102-85.175 Section 102-85... of Service § 102-85.175 Are the standard level services for cleaning, mechanical operation, and maintenance identified in an OA? Unless specified otherwise in the OA, standard level services for cleaning...

  16. Postharvest Chemical, Sensorial and Physical-Mechanical Properties of Wild Apricot (Prunus armeniaca L.

    Directory of Open Access Journals (Sweden)

    Evica MRATINIĆ

    2011-11-01

    Full Text Available Some chemical, sensorial and physical-mechanical properties of 19 apricot genotypes and Hungarian Best (control such as moisture content, soluble solids content, titratable acidity ratio and their ratio, fruit and stone mass, flesh/stone ratio, fruit dimensions (length, width, thickness, arithmetic and geometric mean diameter, sphericity, surface area and aspect ratio were determined. Their application is also discussed. The highest moisture content and stone mass observed in X-1/1/04 and X-1/2/04, soluble solids content in ZO-1/03, titratable acidity in ZL-2/03, SS/TA ratio in ZL-1/03, and fruit mass and flesh/stone ratio in DL-1/1/04 genotype. The most number of genotypes have orange and deep orange skin and flesh colour, respectively, whereas sweet kernel taste was predominant in most genotypes. Regarding physical-mechanical properties, the superior fruit dimensions (length, width, thickness, arithmetic and geometric mean diameter and surface area observed in DL-1/1/04 genotype, whereas the highest sphericity and surface area observed in X-1/1/04 and X-1/2/04 genotypes. Also, the series of genotypes evaluated have better chemical, sensorial and physical-mechanical properties than Hungarian Best (control. Finally, information about these properties is very important for understanding the behaviour of the product during the postharvest operations.

  17. Physical Mechanisms Responsible for Electrical Conduction in Pt/GaN Schottky Diodes

    Directory of Open Access Journals (Sweden)

    H. MAZARI

    2014-05-01

    Full Text Available The current-voltage (I-V characteristics of Pt/(n.u.d-GaN and Pt/Si-doped-GaN diodes Schottky are investigated. Based on these measurements, physical mechanisms responsible for electrical conduction have been suggested. The contribution of thermionic-emission current and various other current transport mechanisms were assumed when evaluating the Schottky barrier height. Thus the generation-recombination, tunneling and leakage currents caused by inhomogeneities and defects at metal-semiconductor interface were taken into account.

  18. Physical biology of human brain development

    Directory of Open Access Journals (Sweden)

    Silvia eBudday

    2015-07-01

    Full Text Available Neurodevelopment is a complex, dynamic process that involves a precisely orchestrated sequence of genetic, environmental, biochemical, and physical events. Developmental biology and genetics have shaped our understanding of the molecular and cellular mechanisms during neurodevelopment. Recent studies suggest that physical forces play a central role in translating these cellular mechanisms into the complex surface morphology of the human brain. However, the precise impact of neuronal differentiation, migration, and connection on the physical forces during cortical folding remains unknown. Here we review the cellular mechanisms of neurodevelopment with a view towards surface morphogenesis, pattern selection, and evolution of shape. We revisit cortical folding as the instability problem of constrained differential growth in a multi-layered system. To identify the contributing factors of differential growth, we map out the timeline of neurodevelopment in humans and highlight the cellular events associated with extreme radial and tangential expansion. We demonstrate how computational modeling of differential growth can bridge the scales-from phenomena on the cellular level towards form and function on the organ level-to make quantitative, personalized predictions. Physics-based models can quantify cortical stresses, identify critical folding conditions, rationalize pattern selection, and predict gyral wavelengths and gyrification indices. We illustrate that physical forces can explain cortical malformations as emergent properties of developmental disorders. Combining biology and physics holds promise to advance our understanding of human brain development and enable early diagnostics of cortical malformations with the ultimate goal to improve treatment of neurodevelopmental disorders including epilepsy, autism spectrum disorders, and schizophrenia.

  19. Congenital amusics use a secondary pitch mechanism to identify lexical tones.

    Science.gov (United States)

    Bones, Oliver; Wong, Patrick C M

    2017-09-01

    Amusia is a pitch perception disorder associated with deficits in processing and production of both musical and lexical tones, which previous reports have suggested may be constrained to fine-grained pitch judgements. In the present study speakers of tone-languages, in which lexical tones are used to convey meaning, identified words present in chimera stimuli containing conflicting pitch-cues in the temporal fine-structure and temporal envelope, and which therefore conveyed two distinct utterances. Amusics were found to be more likely than controls to judge the word according to the envelope pitch-cues. This demonstrates that amusia is not associated with fine-grained pitch judgements alone, and is consistent with there being two distinct pitch mechanisms and with amusics having an atypical reliance on a secondary mechanism based upon envelope cues. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  20. Why Social Pain Can Live on: Different Neural Mechanisms Are Associated with Reliving Social and Physical Pain.

    Science.gov (United States)

    Meyer, Meghan L; Williams, Kipling D; Eisenberger, Naomi I

    2015-01-01

    Although social and physical pain recruit overlapping neural activity in regions associated with the affective component of pain, the two pains can diverge in their phenomenology. Most notably, feelings of social pain can be re-experienced or "relived," even when the painful episode has long passed, whereas feelings of physical pain cannot be easily relived once the painful episode subsides. Here, we observed that reliving social (vs. physical) pain led to greater self-reported re-experienced pain and greater activity in affective pain regions (dorsal anterior cingulate cortex and anterior insula). Moreover, the degree of relived pain correlated positively with affective pain system activity. In contrast, reliving physical (vs. social) pain led to greater activity in the sensory-discriminative pain system (primary and secondary somatosensory cortex and posterior insula), which did not correlate with relived pain. Preferential engagement of these different pain mechanisms may reflect the use of different top-down neurocognitive pathways to elicit the pain. Social pain reliving recruited dorsomedial prefrontal cortex, often associated with mental state processing, which functionally correlated with affective pain system responses. In contrast, physical pain reliving recruited inferior frontal gyrus, known to be involved in body state processing, which functionally correlated with activation in the sensory pain system. These results update the physical-social pain overlap hypothesis: while overlapping mechanisms support live social and physical pain, distinct mechanisms guide internally-generated pain.

  1. Mathematica for Theoretical Physics: Electrodynamics, Quantum Mechanics, General Relativity and Fractals

    International Nuclear Information System (INIS)

    Heusler, Stefan

    2006-01-01

    The main focus of the second, enlarged edition of the book Mathematica for Theoretical Physics is on computational examples using the computer program Mathematica in various areas in physics. It is a notebook rather than a textbook. Indeed, the book is just a printout of the Mathematica notebooks included on the CD. The second edition is divided into two volumes, the first covering classical mechanics and nonlinear dynamics, the second dealing with examples in electrodynamics, quantum mechanics, general relativity and fractal geometry. The second volume is not suited for newcomers because basic and simple physical ideas which lead to complex formulas are not explained in detail. Instead, the computer technology makes it possible to write down and manipulate formulas of practically any length. For researchers with experience in computing, the book contains a lot of interesting and non-trivial examples. Most of the examples discussed are standard textbook problems, but the power of Mathematica opens the path to more sophisticated solutions. For example, the exact solution for the perihelion shift of Mercury within general relativity is worked out in detail using elliptic functions. The virial equation of state for molecules' interaction with Lennard-Jones-like potentials is discussed, including both classical and quantum corrections to the second virial coefficient. Interestingly, closed solutions become available using sophisticated computing methods within Mathematica. In my opinion, the textbook should not show formulas in detail which cover three or more pages-these technical data should just be contained on the CD. Instead, the textbook should focus on more detailed explanation of the physical concepts behind the technicalities. The discussion of the virial equation would benefit much from replacing 15 pages of Mathematica output with 15 pages of further explanation and motivation. In this combination, the power of computing merged with physical intuition would

  2. An Overview of Promising Grades of Tool Materials Based on the Analysis of their Physical-Mechanical Characteristics

    Science.gov (United States)

    Kudryashov, E. A.; Smirnov, I. M.; Grishin, D. V.; Khizhnyak, N. A.

    2018-06-01

    The work is aimed at selecting a promising grade of a tool material, whose physical-mechanical characteristics would allow using it for processing the surfaces of discontinuous parts in the presence of shock loads. An analysis of the physical-mechanical characteristics of most common tool materials is performed and the data on a possible provision of the metal-working processes with promising composite grades are presented.

  3. Applied mechanics of solids

    CERN Document Server

    Bower, Allan F

    2009-01-01

    Modern computer simulations make stress analysis easy. As they continue to replace classical mathematical methods of analysis, these software programs require users to have a solid understanding of the fundamental principles on which they are based. Develop Intuitive Ability to Identify and Avoid Physically Meaningless Predictions Applied Mechanics of Solids is a powerful tool for understanding how to take advantage of these revolutionary computer advances in the field of solid mechanics. Beginning with a description of the physical and mathematical laws that govern deformation in solids, the text presents modern constitutive equations, as well as analytical and computational methods of stress analysis and fracture mechanics. It also addresses the nonlinear theory of deformable rods, membranes, plates, and shells, and solutions to important boundary and initial value problems in solid mechanics. The author uses the step-by-step manner of a blackboard lecture to explain problem solving methods, often providing...

  4. Introductory quantum mechanics a traditional approach emphasizing connections with classical physics

    CERN Document Server

    Berman, Paul R

    2018-01-01

    This book presents a basic introduction to quantum mechanics at the undergraduate level. Depending on the choice of topics, it can be used for a one-semester or two-semester course. An attempt has been made to anticipate the conceptual problems students encounter when they first study quantum mechanics. Wherever possible, examples are given to illustrate the underlying physics associated with the mathematical equations of quantum mechanics. To this end, connections are made with corresponding phenomena in classical mechanics and electromagnetism. The problems at the end of each chapter are intended to help students master the course material and to explore more advanced topics. Many calculations exploit the extraordinary capabilities of computer programs such as Mathematica, MatLab, and Maple. Students are urged to use these programs, just as they had been urged to use calculators in the past. The treatment of various topics is rather complete, in that most steps in derivations are included. Several of the ch...

  5. Physical-mechanical image of the cell surface on the base of AFM data in contact mode

    Science.gov (United States)

    Starodubtseva, M. N.; Starodubtsev, I. E.; Yegorenkov, N. I.; Kuzhel, N. S.; Konstantinova, E. E.; Chizhik, S. A.

    2017-10-01

    Physical and mechanical properties of the cell surface are well-known markers of a cell state. The complex of the parameters characterizing the cell surface properties, such as the elastic modulus (E), the parameters of adhesive (Fa), and friction (Ff) forces can be measured using atomic force microscope (AFM) in a contact mode and form namely the physical-mechanical image of the cell surface that is a fundamental element of the cell mechanical phenotype. The paper aims at forming the physical-mechanical images of the surface of two types of glutaraldehyde-fixed cancerous cells (human epithelial cells of larynx carcinoma, HEp-2c cells, and breast adenocarcinoma, MCF-7 cells) based on the data obtained by AFM in air and revealing the basic difference between them. The average values of friction, elastic and adhesive forces, and the roughness of lateral force maps, as well as dependence of the fractal dimension of lateral force maps on Z-scale factor have been studied. We have revealed that the response of microscale areas of the HEp-2c cell surface having numerous microvilli to external mechanical forces is less expressed and more homogeneous in comparison with the response of MCF-7 cell surface.

  6. Random number generators and the Metropolis algorithm: application to various problems in physics and mechanics as an introduction to computational physics

    International Nuclear Information System (INIS)

    Calvayrac, Florent

    2005-01-01

    We present known and new applications of pseudo random numbers and of the Metropolis algorithm to phenomena of physical and mechanical interest, such as the search of simple clusters isomers with interactive visualization, or vehicle motion planning. The progression towards complicated problems was used with first-year graduate students who wrote most of the programs presented here. We argue that the use of pseudo random numbers in simulation and extrema research programs in teaching numerical methods in physics allows one to get quick programs and physically meaningful and demonstrative results without recurring to the advanced numerical analysis methods

  7. Identifying and Investigating Difficult Concepts in Engineering Mechanics and Electric Circuits. Research Brief

    Science.gov (United States)

    Streveler, Ruth; Geist, Monica; Ammerman, Ravel; Sulzbach, Candace; Miller, Ronald; Olds, Barbara; Nelson, Mary

    2007-01-01

    This study extends ongoing work to identify difficult concepts in thermal and transport science and measure students' understanding of those concepts via a concept inventory. Two research questions provided the focal point: "What important concepts in electric circuits and engineering mechanics do students find difficult to learn?" and…

  8. Characterization of parameters and strategies used by physical therapists in difficult mechanical ventilation weaning

    Directory of Open Access Journals (Sweden)

    Fabíola Maria Sabino Meireles

    2013-03-01

    Full Text Available Objective: To characterize the main strategies and parameters used by physical therapists in difficult mechanical ventilation weaning. Methods: Cross-sectional study including all the physical therapists working in adult Intensive Care Units in three public hospitals in Fortaleza-CE. A questionnaire with closed questions related to difficult mechanical ventilation weaning was applied, with either one or multiple answers. The data was treated with descriptive and non-parametric analysis. Results: Among the parameters mostly used by the 56 interviewed physical therapists for the difficult weaning, were found: current volume reduction (26 - 46.4% and desaturation during aspiration (17 - 30.4%. It was observed that 38 (67.9% alternate T-tube and continuous positive airway pressure (CPAP as strategies for difficult weaning, and 28 (50% reported reducing the pressure support. There was no statistical difference between the strategies used in the studied hospitals, neither correlation between strategies and parameters. Conclusion: It was found that physical therapists have been performing similar strategies, which are also shown in the literature, but this is not the case with the parameters. The parameters used are not supported by the literature.

  9. Computational mechanics research at ONR

    International Nuclear Information System (INIS)

    Kushner, A.S.

    1986-01-01

    Computational mechanics is not an identified program at the Office of Naval Research (ONR), but rather plays a key role in the Solid Mechanics, Fluid Mechanics, Energy Conversion, and Materials Science programs. The basic philosophy of the Mechanics Division at ONR is to support fundamental research which expands the basis for understanding, predicting, and controlling the behavior of solid and fluid materials and systems at the physical and geometric scales appropriate to the phenomena of interest. It is shown in this paper that a strong commonalty of computational mechanics drivers exists for the forefront research areas in both solid and fluid mechanics

  10. Physical and Mechanical Properties of the Muds of the Fergoug Dam

    Directory of Open Access Journals (Sweden)

    A. Benaissa

    2014-08-01

    Full Text Available Volumes of dredged sediments are rather considerable and are estimated approximately 600 million m3 per year worldwide. These can represent a very interesting source of raw materials, in particular for a sector consuming aggregates such as civil engineering. The work presented in this article is interested particularly in the valorization of the muds which come from the dam of Fergoug (Algeria, with an aim of improving their mechanical behavior using binders (cement, lime in order to use them in road engineering. To this end, we carried out a series of physical, chemical, mechanical and mineralogical analyses presented in this paper.

  11. Continuum methods of physical modeling continuum mechanics, dimensional analysis, turbulence

    CERN Document Server

    Hutter, Kolumban

    2004-01-01

    The book unifies classical continuum mechanics and turbulence modeling, i.e. the same fundamental concepts are used to derive model equations for material behaviour and turbulence closure and complements these with methods of dimensional analysis. The intention is to equip the reader with the ability to understand the complex nonlinear modeling in material behaviour and turbulence closure as well as to derive or invent his own models. Examples are mostly taken from environmental physics and geophysics.

  12. On the Quantum Mechanical Wave Function as a Link Between Cognition and the Physical World A Role for Psychology

    CERN Document Server

    Snyder, D

    2002-01-01

    A straightforward explanation of fundamental tenets of quantum mechanics concerning the wave function results in the thesis that the quantum mechanical wave function is a link between human cognition and the physical world. The reticence on the part of physicists to adopt this thesis is discussed. A comparison is made to the behaviorists' consideration of mind, and the historical roots of how the problem concerning the quantum mechanical wave function arose are discussed. The basis for an empirical demonstration that the wave function is a link between human cognition and the physical world is provided through developing an experiment using methodology from psychology and physics. Based on research in psychology and physics that relied on this methodology, it is likely that Einstein, Podolsky, and Rosen's theoretical result that mutually exclusive wave functions can simultaneously apply to the same concrete physical circumstances can be implemented on an empirical level.

  13. Identifying events that impact self-efficacy in physics learning

    Directory of Open Access Journals (Sweden)

    Vashti Sawtelle

    2012-09-01

    Full Text Available We present a method of analyzing the development of self-efficacy in real time using a framework of self-efficacy opportunities (SEOs. Considerable research has shown a connection between self-efficacy, or the confidence in one’s own ability to perform a task, and success in science fields. Traditional methods of investigating the development of self-efficacy have required participants to recollect past events. This reliance on participant memory makes it difficult to understand what impact particular events may have on developing self-efficacy in the moment. We use video recordings of three undergraduate Modeling Instruction students solving a physics problem to characterize SEOs in a moment-by-moment analysis. We then validate these characterizations of the development of self-efficacy by reviewing the problem-solving session with the participants and find evidence that the SEOs identified are taken up and impact self-efficacy. This characterization and validation of SEOs in the moment represents a first step towards establishing a methodology for analyzing the development of self-efficacy in real time.

  14. Stereology application in the investigation of physical and mechanical properties of porous materials

    International Nuclear Information System (INIS)

    Cytermann, Richard.

    1979-04-01

    The sintering of carbonyl nickel powders has been studied through stereology (quantitative microscopy) associated with different physical and mechanical measurements. This study demonstrated that a set of stereological parameters, such as porosity, grain size, mean pore volume ..., was necessary to characterize porous parts with the same porosity obtained through different ways. On the one hand, stereology permitted to elucidate powder shape and speed of pressure rising influence on the compacting process. On the other hand, the study of physical and mechanical properties related to their microstructure led to distinguish: properties such as elasticity modulus independant of compacting pressure, sintering temperature and powder shape. Their evolution has been characterized through contiguity coefficient; properties such as tensile strength dependant of sintering parameters. Their characterization required the simultaneous measurement of porosity mean pore volume, shape factor and grain size [fr

  15. Towards a conceptual framework for identifying student difficulties with solving Real-World Problems in Physics

    DEFF Research Database (Denmark)

    Niss, Martin

    2012-01-01

    This paper develops a conceptual framework for identifying the challenges and obstacles university students encounter when solving real-world problems involving Physics. The framework is based on viewing problem solving as a modelling process. In order to solve a real-world problem, the problem...... solver has to go through the steps and do the tasks of such a process. The paper presents a theoretical analysis of what it takes to solve three real-world problems, demonstrating how the framework presented captures the essential aspects of solving them. Moreover, it is argued that three steps critical...... for real-world problem solving – initial analysis of the problem situation, choice of relevant physical theory (the so-called paradigmatic choice) and mathematization – are not covered by existing models of problem solving in Physics. Finally, the existing research on student difficulties with problem...

  16. Physical Mechanism of Comet Outbursts: The Movie

    Science.gov (United States)

    Hartmann, William K.

    2014-11-01

    During experiments conducted in 1976 at the NASA Ames Research Center’s Vertical Gun Facility (VGF), the author studied low velocity impacts into simulated regolith powders and gravels, in order to examine physics of low-velocity collisions during early solar system planetesimal formation. In one “accidental” experiment, the bucket of powder remained gas-charged during evacuation of the VGF vacuum chamber. The impactor, moving at 5.5 m/s, disturbed the surface, initiating eruptions of dust-charged gas, shooting in jets from multiple vents at speeds up to about 3 m/s, with sporadic venting until 17 seconds after the impact. This experiment was described in [1], which concluded that it simulated comet eruption phenomena. In this hypothesis, a comet nucleus develops a lag deposit of regolith in at least some regions. At a certain distance from the sun, the thermal wave penetrates to an ice-rich depth, causing sublimation. Gas rises into the regolith, collects in pore spaces, and creates a gas-charged powder, as in our experiment. Any surface disturbance, such as a meteoroid, may initiate a temporary eruption, or eventually the gas pressure becomes sufficient to blow off the overburden. Our observed ejection speed would be sufficient to launch dust off of a kilometer-scale comet nucleus.Film (100 frames/s) of the event was obtained, but was partially torn up in a projector. It has recently been reconstituted (Centric Photo Labs, Tucson) and dramatically illustrates various cometary phenomena. Parabolic curtains of erupted material resemble curtains of material photographed from earth in real comet comas, “falling back” under solar wind forces. In retrospect, the mechanism photographed here helps explain:*sporadic eruptions in Comet P/Schwassmann-Wachmann 1 (near-circular orbit at ~6 A.U., where repeated recharge may occur).*sporadic eruptions on “asteroid” 2060 Chiron (which stays beyond 8.5 A.U.). *the thicker dust curtain (and longer eruption?) than

  17. Physical-chemical mechanisms of pattern formation during gastrulation

    Science.gov (United States)

    Bozorgui, Behnaz; Kolomeisky, Anatoly B.; Teimouri, Hamid

    2018-03-01

    Gastrulation is a fundamental phase during the biological development of most animals when a single layer of identical embryo cells is transformed into a three-layer structure, from which the organs start to develop. Despite a remarkable progress in quantifying the gastrulation processes, molecular mechanisms of these processes remain not well understood. Here we theoretically investigate early spatial patterning in a geometrically confined colony of embryonic stem cells. Using a reaction-diffusion model, a role of Bone-Morphogenetic Protein 4 (BMP4) signaling pathway in gastrulation is specifically analyzed. Our results show that for slow diffusion rates of BMP4 molecules, a new length scale appears, which is independent of the size of the system. This length scale separates the central region of the colony with uniform low concentrations of BMP molecules from the region near the colony edge where the concentration of signaling molecules is elevated. The roles of different components of the signaling pathway are also explained. Theoretical results are consistent with recent in vitro experiments, providing microscopic explanations for some features of early embryonic spatial patterning. Physical-chemical mechanisms of these processes are discussed.

  18. Lithium doped calcium phosphate cement maintains physical mechanical properties and promotes osteoblast proliferation and differentiation.

    Science.gov (United States)

    Li, Li; Wang, Renchong; Li, Baichuan; Liang, Wei; Pan, Haobo; Cui, Xu; Tang, Jingli; Li, Bing

    2017-07-01

    Calcium phosphate cement (CPC) has been widely used in bone tissue repairing due to its physical mechanical properties and biocompatibility. Addition of trace element to CPC has shown promising evidence to improve the physical properties and biological activities of CPC. Lithium (Li) has effect on osteoblast proliferation and differentiation. In this study, we incorporated Li to CPC and examined the physical properties of Li/CPC and its effect on osteoblast proliferation and differentiation. We found that Li doped CPC maintained similar setting time, pore size distribution, compressive strength, composition, and morphology as CPC without Li. Additionally, Li doped CPC improved osteoblast proliferation and differentiation significantly compared to CPC without Li. To our knowledge, our results, for the first time, show that Li doped CPC has beneficial effect on osteoblast in cell culture while keeps the excellent physical-mechanical properties of CPC. This study will lead to potential application of Li doped CPC in bone tissue engineering. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 944-952, 2017. © 2016 Wiley Periodicals, Inc.

  19. Mechanical and physical properties of hydrothermally altered rocks, Taupo Volcanic Zone, New Zealand

    Science.gov (United States)

    Wyering, L. D.; Villeneuve, M. C.; Wallis, I. C.; Siratovich, P. A.; Kennedy, B. M.; Gravley, D. M.; Cant, J. L.

    2014-11-01

    Mechanical characterization of hydrothermally altered rocks from geothermal reservoirs will lead to an improved understanding of rock mechanics in a geothermal environment. To characterize rock properties of the selected formations, we prepared samples from intact core for non-destructive (porosity, density and ultrasonic wave velocities) and destructive laboratory testing (uniaxial compressive strength). We characterised the hydrothermal alteration assemblage using optical mineralogy and existing petrography reports and showed that lithologies had a spread of secondary mineralisation that occurred across the smectite, argillic and propylitic alteration zones. The results from the three geothermal fields show a wide variety of physical rock properties. The testing results for the non-destructive testing shows that samples that originated from the shallow and low temperature section of the geothermal field had higher porosity (15 - 56%), lower density (1222 - 2114 kg/m3) and slower ultrasonic waves (1925 - 3512 m/s (vp) and 818 - 1980 m/s (vs)), than the samples from a deeper and higher temperature section of the field (1.5 - 20%, 2072 - 2837 kg/m3, 2639 - 4593 m/s (vp) and 1476 - 2752 m/s (vs), respectively). The shallow lithologies had uniaxial compressive strengths of 2 - 75 MPa, and the deep lithologies had strengths of 16 - 211 MPa. Typically samples of the same lithologies that originate from multiple wells across a field have variable rock properties because of the different alteration zones from which each sample originates. However, in addition to the alteration zones, the primary rock properties and burial depth of the samples also have an impact on the physical and mechanical properties of the rock. Where this data spread exists, we have been able to derive trends for this specific dataset and subsequently have gained an improved understanding of how hydrothermal alteration affects physical and mechanical properties.

  20. Theoretical mechanics an introduction to mathematical physics

    CERN Document Server

    Sweetman Ames, Joseph

    1958-01-01

    In this book Professors Ames and Murnaghan undertake a mathematically rigorous development of theoretical mechanics from the point of view of modern physics. It gives an intensive survey of this basis field with extensive and extremely thorough discussions of vector and tensor methods, the displacement and motion of a rigid body, dynamics of inertial and non-inertial reference frames, dynamics of a particle, harmonic vibrations, nonrectilinear motion of a particle, central forces and universal gravitation, dynamics of a systems of material particle,impulsive forces, motion of a rigid body about a fixed point, gyroscopic and barygyroscopic theory, general dynamical theorems, vibrations about a point of equilibrium, the principle of least action, holonomic and nonholonomic systems, the principle of least constraint, general methods of integration and the three body problem, the potential function (including simple-layer and double-layer potentials), wave motion, the Lorentz-Einstein transformation and an illumi...

  1. Working mechanisms of a behavioural intervention promoting physical activity in persons with subacute spinal cord injury

    NARCIS (Netherlands)

    Nooijen, Carla F. J.; Stam, Henk J.; Schoenmakers, Imte; Sluis, Tebbe; Post, Marcel; Twisk, Jos; van den Berg-Emons, Rita J. G.

    OBJECTIVE: In order to unravel the working mechanisms that underlie the effectiveness of a behavioural intervention promoting physical activity in persons with subacute spinal cord injury, the aim of this study was to assess the mediating effects of physical and psychosocial factors on the

  2. Principles of designing cyber-physical system of producing mechanical assembly components at Industry 4.0 enterprise

    Science.gov (United States)

    Gurjanov, A. V.; Zakoldaev, D. A.; Shukalov, A. V.; Zharinov, I. O.

    2018-03-01

    The task of developing principles of cyber-physical system constitution at the Industry 4.0 company of the item designing components of mechanical assembly production is being studied. The task has been solved by analyzing the components and technologies, which have some practical application in the digital production organization. The list of components has been defined and the authors proposed the scheme of the components and technologies interconnection in the Industry 4.0 of mechanical assembly production to make an uninterrupted manufacturing route of the item designing components with application of some cyber-physical systems.

  3. Quantum Mechanics/Molecular Mechanics Simulations Identify the Ring-Opening Mechanism of Creatininase.

    Science.gov (United States)

    Jitonnom, Jitrayut; Mujika, Jon I; van der Kamp, Marc W; Mulholland, Adrian J

    2017-12-05

    Creatininase catalyzes the conversion of creatinine (a biosensor for kidney function) to creatine via a two-step mechanism: water addition followed by ring opening. Water addition is common to other known cyclic amidohydrolases, but the precise mechanism for ring opening is still under debate. The proton donor in this step is either His178 or a water molecule bound to one of the metal ions, and the roles of His178 and Glu122 are unclear. Here, the two possible reaction pathways have been fully examined by means of combined quantum mechanics/molecular mechanics simulations at the SCC-DFTB/CHARMM22 level of theory. The results indicate that His178 is the main catalytic residue for the whole reaction and explain its role as proton shuttle during the ring-opening step. In the first step, His178 provides electrostatic stabilization to the gem-diolate tetrahedral intermediate. In the second step, His178 abstracts the hydroxyl proton of the intermediate and delivers it to the cyclic amide nitrogen, leading to ring opening. The latter is the rate-limiting step with a free energy barrier of 18.5 kcal/mol, in agreement with the experiment. We find that Glu122 must be protonated during the enzyme reaction, so that it can form a stable hydrogen bond with its neighboring water molecule. Simulations of the E122Q mutant showed that this replacement disrupts the H-bond network formed by three conserved residues (Glu34, Ser78, and Glu122) and water, increasing the energy barrier. Our computational studies provide a comprehensive explanation for previous structural and kinetic observations, including why the H178A mutation causes a complete loss of activity but the E122Q mutation does not.

  4. Validation of a physical activity questionnaire to measure the effect of mechanical strain on bone mass.

    Science.gov (United States)

    Kemper, Han C G; Bakker, I; Twisk, J W R; van Mechelen, W

    2002-05-01

    Most of the questionnaires available to estimate the daily physical activity levels of humans are based on measuring the intensity of these activities as multiples of resting metabolic rate (METs). Metabolic intensity of physical activities is the most important component for evaluating effects on cardiopulmonary fitness. However, animal studies have indicated that for effects on bone mass the intensity in terms of energy expenditure (metabolic component) of physical activities is less important than the intensity of mechanical strain in terms of the forces by the skeletal muscles and/or the ground reaction forces. The physical activity questionnaire (PAQ) used in the Amsterdam Growth and Health Longitudinal Study (AGAHLS) was applied to investigate the long-term effects of habitual physical activity patterns during youth on health and fitness in later adulthood. The PAQ estimates both the metabolic components of physical activities (METPA) and the mechanical components of physical activities (MECHPA). Longitudinal measurements of METPA and MECHPA were made in a young population of males and females ranging in age from 13 to 32 years. This enabled evaluation of the differential effects of physical activities during adolescence (13-16 years), young adulthood (21-28 years), and the total period of 15 years (age 13-28 years) on bone mineral density (BMD) of the lumbar spine, as measured by dual-energy X-ray absorptiometry (DXA) in males (n = 139) and females (n = 163) at a mean age of 32 years. The PAQ used in the AGAHLS during adolescence (13-16 years) and young adulthood (21-28 years) has the ability to measure the physical activity patterns of both genders, which are important for the development of bone mass at the adult age. MECHPA is more important than METPA. The highest coefficient of 0.33 (p PAQ was established by comparing PAQ scores during four annual measurements in 200 boys and girls with two other objective measures of physical activity: movement

  5. Psychotropic Drug Use in Physically Restrained, Critically Ill Adults Receiving Mechanical Ventilation.

    Science.gov (United States)

    Guenette, Melanie; Burry, Lisa; Cheung, Alexandra; Farquharson, Tara; Traille, Marlene; Mantas, Ioanna; Mehta, Sangeeta; Rose, Louise

    2017-09-01

    Restraining therapies (physical or pharmacological) are used to promote the safety of both patients and health care workers. Some guidelines recommend nonpharmacological or pharmacological interventions be used before physical restraints in critically ill patients. To characterize psychotropic drug interventions before and after use of physical restraints in critically ill adults receiving mechanical ventilation. A single-center, prospective, observational study documenting psychotropic drug use and Sedation-Agitation Scale (SAS) scores in the 2 hours before and the 6 hours after application of physical restraints. Ninety-three patients were restrained for a median of 21 hours (interquartile range, 9-70 hours). Thirty percent of patients did not receive a psychotropic drug or had a drug stopped or decreased before physical restraints were applied. More patients received a psychotropic drug intervention after use of physical restraints than before (86% vs 56%, P = .001). Administration of opioids was more common after the use of physical restraints (54% vs 20% of patients, P = .001) and accounted for more drug interventions (45% vs 29%, P = .001). Fifty patients had SAS scores from both time periods; 16% remained oversedated, 24% were appropriately sedated, and 16% remained agitated in both time periods. Patients became oversedated (20%), more agitated (10%), less agitated (8%), and less sedated (6%) after restraint use. Psychotropic drug interventions (mostly using opioids) were more common after use of physical restraints. Some patients may be physically restrained for anticipated treatment interference without consideration of pharmacological options and without documented agitation. ©2017 American Association of Critical-Care Nurses.

  6. Development of Physics and Control of Multiple Forcing Mechanisms for the Alaska Tsunami Forecast Model

    Science.gov (United States)

    Bahng, B.; Whitmore, P.; Macpherson, K. A.; Knight, W. R.

    2016-12-01

    The Alaska Tsunami Forecast Model (ATFM) is a numerical model used to forecast propagation and inundation of tsunamis generated by earthquakes or other mechanisms in either the Pacific Ocean, Atlantic Ocean or Gulf of Mexico. At the U.S. National Tsunami Warning Center (NTWC), the use of the model has been mainly for tsunami pre-computation due to earthquakes. That is, results for hundreds of hypothetical events are computed before alerts, and are accessed and calibrated with observations during tsunamis to immediately produce forecasts. The model has also been used for tsunami hindcasting due to submarine landslides and due to atmospheric pressure jumps, but in a very case-specific and somewhat limited manner. ATFM uses the non-linear, depth-averaged, shallow-water equations of motion with multiply nested grids in two-way communications between domains of each parent-child pair as waves approach coastal waters. The shallow-water wave physics is readily applicable to all of the above tsunamis as well as to tides. Recently, the model has been expanded to include multiple forcing mechanisms in a systematic fashion, and to enhance the model physics for non-earthquake events.ATFM is now able to handle multiple source mechanisms, either individually or jointly, which include earthquake, submarine landslide, meteo-tsunami and tidal forcing. As for earthquakes, the source can be a single unit source or multiple, interacting source blocks. Horizontal slip contribution can be added to the sea-floor displacement. The model now includes submarine landslide physics, modeling the source either as a rigid slump, or as a viscous fluid. Additional shallow-water physics have been implemented for the viscous submarine landslides. With rigid slumping, any trajectory can be followed. As for meteo-tsunami, the forcing mechanism is capable of following any trajectory shape. Wind stress physics has also been implemented for the meteo-tsunami case, if required. As an example of multiple

  7. The antidepressant effects of physical activity: mediating self-esteem and self-efficacy mechanisms.

    Science.gov (United States)

    Ryan, Michael P

    2008-01-01

    The investigation of physiological mechanisms responsible for the antidepressant effects of physical activity has been hampered by the failure to control adequately for psychosocial effects and the failure to control for participant expectancies concerning exercise outcomes. This retrospective, cross-sectional study of 188 male and 193 female undergraduates used structural regression modeling to assess the adequacy of the revised version of the Exercise and Self-Esteem Model (EXSEM; Sonstroem, R. J., Harlow, L. L., & Josephs, L. (1994). Exercise and self-esteem: Validity of model expansion and exercise associations. Journal of Sport & Exercise Psychology, 16, 29-42), a modified version of that model, and an Exercise Self-Esteem and Efficacy Model (EXSEEM). Direct effects of physical activity on depressive symptomatology (SCL90R-D; Derogatis, L. R. (1994). SCL-90-R: Administration, scoring, and procedures manual-II for the revised version (2nd ed.). Towson, MD: Clinical Psychometric Research) were obtained using a disguised-measures procedure to minimize expectancy artifacts. However, direct activity effects were negligible when activity-based esteem and efficacy effects were added to the structural regression model. Eliminating direct physical-activity effects did not reduce the quality of fit of the EXSEEM model nor the variance accounted for in SCL90R-D scores. Direct effects of physical-self esteem, but not global self-esteem, on SCL90R-D scores were found for females. Conversely, direct effects of global self-esteem, but not physical self-esteem, on SCL90R-D scores were found for males. Supplementary analyses indicated that scheduling efficacy for aerobic exercise had a direct effect on SCL90R-D scores for males and females, but task efficacy had direct effects only on perceived endurance for both males and females. These findings are consistent with the proposed EXSEEM model and imply that independent self-esteem and self-efficacy mechanisms are sufficient to

  8. Quantum mechanics. Textbook for students of physics, mathematics and physical chemistry. 4. ed. Quantenmechanik. Studienbuch fuer Studierende der Physik, Mathematik und Physikalischen Chemie

    Energy Technology Data Exchange (ETDEWEB)

    Grawert, G.

    1985-01-01

    The aim of the textbook now present in fourth edition is the representation of the fundamental physical concepts of the theory of quantum mechanics. It is confined to the nonrelativistic quantum mechanics; however also themes are treated which are in an extended form important just for quantum field theory up to the modern development. (orig./HSI). With 22 figs.

  9. Mechanical reliability of structures subjected to time-variant physical phenomena

    International Nuclear Information System (INIS)

    Lemaire, Celine

    1999-01-01

    This work deals with two-phase critical flows in order to improve the way to dimension safety systems. It brings a numerical, physical and experimental contribution. We emphasized the importance to validate separately the numerical method and the physical model. Reference numerical solutions, assimilated to quasi-analytical solutions, were elaborated for a stationary one-dimensional restriction. They allowed to validate in space non stationary numerical schemes converged in time and constitute space convergence indicator (2 schemes validated). With this reliable numerical solution, we studied the physical model. The potential of a particular existing dispersed flow model has been validated thanks to experimental data. The validity domain of such a model is inevitably reduced. During this study, particular behaviors have been exhibited like the pseudo-critical nature of flow with a relaxation process, the non characteristic properties/nature of critical parameters where disequilibrium is largely reduced or the predominance of pressure due to interfacial transfers. The multidimensional aspect has been studied. A data base included local parameters corresponding to a simplify geometry has been constituted. The flow impact on the disk has been characterized and multidimensional effects identified. These effects form an additional step to the validation of multidimensional physical models. (author) [fr

  10. Probabilistic-Stochastic Model of Distribution of Physical and Mechanical Properties of Soft Mineral Rocks

    Directory of Open Access Journals (Sweden)

    O.O. Sdvizhkova

    2017-12-01

    Full Text Available The physical and mechanical characteristics of soils and soft rocks obtained as a result of laboratory tests are important initial parameters for assessing the stability of natural and artificial slopes. Such properties of rocks as adhesion and the angle of internal friction are due to the influence of a number of natural and technogenic factors. At the same time, from the set of factors influencing the stability of the slope, the most significant ones are singled out, which to a greater extent determine the properties of the rocks. The more factors are taken into account in the geotechnical model, the more closely the properties of the rocks are studied, which increases the accuracy of the scientific forecast of the landslide danger of the slope. On the other hand, an increase in the number of factors involved in the model complicates it and causes a decrease in the reliability of geotechnical calculations. The aim of the work is to construct a statistical distribution of the studied physical and mechanical properties of soft rocks and to substantiate a probabilistic statistical model. Based on the results of laboratory tests of rocks, the statistical distributions of the quantitative traits studied, the angle of internal friction φ and the cohesion, were constructed. It was established that the statistical distribution of physical mechanical properties of rocks is close to a uniform law.

  11. Mechanical and physical simulation of complex 3-D bulk forming processes with Forge3

    International Nuclear Information System (INIS)

    Chenot, J-L.; Chastel, Y.

    2000-01-01

    To-day there is a growing need to predict numerically not only the mechanical parameters, but also the final microstructure of the work-piece. On the other hand, the use of simulation codes to analyze complex laboratory experiments can be viewed as a powerful way to improve the analysis of physical data. We outline basic methods for developing a finite element model of unsteady metal forming processes. At first the thermal and mechanical equations are recalled with several integral formulations. The most important issues are discussed, including time integration, evolving contact with rigid or deformable tools, meshing, remeshing, and parallel computing. Physical coupling is presented with the two possible approaches: introduction of internal parameters describing the evolution of microstructure and coupling with constitutive equations; multi-scale computation illustrated by the texture prediction. Finally it is shown that the inverse approach can be successfully applied to improve parameters identification from data acquisition of laboratory tests, or possibly from industrial experiments. This methodology can be utilized for: constitutive modeling, friction behavior, or even for internal parameters laws describing physical evolution. (author)

  12. Mechanistic phenotypes: an aggregative phenotyping strategy to identify disease mechanisms using GWAS data.

    Directory of Open Access Journals (Sweden)

    Jonathan D Mosley

    Full Text Available A single mutation can alter cellular and global homeostatic mechanisms and give rise to multiple clinical diseases. We hypothesized that these disease mechanisms could be identified using low minor allele frequency (MAF<0.1 non-synonymous SNPs (nsSNPs associated with "mechanistic phenotypes", comprised of collections of related diagnoses. We studied two mechanistic phenotypes: (1 thrombosis, evaluated in a population of 1,655 African Americans; and (2 four groupings of cancer diagnoses, evaluated in 3,009 white European Americans. We tested associations between nsSNPs represented on GWAS platforms and mechanistic phenotypes ascertained from electronic medical records (EMRs, and sought enrichment in functional ontologies across the top-ranked associations. We used a two-step analytic approach whereby nsSNPs were first sorted by the strength of their association with a phenotype. We tested associations using two reverse genetic models and standard additive and recessive models. In the second step, we employed a hypothesis-free ontological enrichment analysis using the sorted nsSNPs to identify functional mechanisms underlying the diagnoses comprising the mechanistic phenotypes. The thrombosis phenotype was solely associated with ontologies related to blood coagulation (Fisher's p = 0.0001, FDR p = 0.03, driven by the F5, P2RY12 and F2RL2 genes. For the cancer phenotypes, the reverse genetics models were enriched in DNA repair functions (p = 2×10-5, FDR p = 0.03 (POLG/FANCI, SLX4/FANCP, XRCC1, BRCA1, FANCA, CHD1L while the additive model showed enrichment related to chromatid segregation (p = 4×10-6, FDR p = 0.005 (KIF25, PINX1. We were able to replicate nsSNP associations for POLG/FANCI, BRCA1, FANCA and CHD1L in independent data sets. Mechanism-oriented phenotyping using collections of EMR-derived diagnoses can elucidate fundamental disease mechanisms.

  13. The Dependence of the Physical Mechanical Properties of Expanded-Clay Lightweight Concrete on the Composition

    Directory of Open Access Journals (Sweden)

    Marija Vaičienė

    2011-04-01

    Full Text Available Binder material is the most expensive raw component of concrete; thus, scientists are looking for cheaper substitute materials. This paper shows that when manufacturing, a part of the binder material of expanded-clay lightweight concrete can be replaced with active filler. The conducted studies show that technogenic – catalyst waste could act as similar filler. The study also includes the dependence of the physical and mechanical properties of expanded-clay lightweight concrete on the concrete mixture and the chemical composition of the samples obtained. Different formation and composition mixtures of expanded-clay lightweight concrete were chosen to determine the properties of physical-mechanical properties such as density, water absorption and compressive strength.Article in Lithuanian

  14. Quantum mechanics at the crossroads. New perspectives from history, philosophy and physics

    International Nuclear Information System (INIS)

    Evans, J.; Thorndike, A.S.

    2007-01-01

    Quantum mechanics is a beautiful, strange and successful theory that originated in the 1920s. The theory, which Niels Bohr regarded as finished and complete, has in the last few decades rapidly developed in unexpected directions. An intense new focus on the stranger aspects of the theory, including entanglement and nonlocality, has resulted in new perceptions of the foundations of quantum mechanics, as well as surprising new exploitations of quantum phenomena. Historians and philosophers of science have also renewed their attention to quantum mechanics, opening up its human dimensions and asking searching questions about its meaning. This volume brings together new insights from different vantage points: Historians of physics, such as J. L. Heilbron; philosophers of science, such as Abner Shimony and Michel Bitbol; and quantum physicists, such as Wolfgang Ketterle and Roland Omncs, join forces to tackle essential questions in quantum mechanics and its interpretation. All the authors have written for a broad readership, and the resulting volume will appeal to everyone wishing to keep abreast of new developments in quantum mechanics, as well as its history and philosophy. (orig.)

  15. Effects of varied porosity on the physic-mechanical properties of sintered ceramic from Ifon clay

    Directory of Open Access Journals (Sweden)

    Fatai Olufemi ARAMIDE

    2017-12-01

    Full Text Available The effects of saw dust admixture on the physic-mechanical properties of sintered clay bonded carbonized palm kernel shell ceramic was investigated. Composite mixtures of powdered carbonized palm kernel shell and clay from Ifon deposit were produced using equal amount of clay and carbonized palm kernel shell. These were then mixed with varied amount of saw dust (0%, 5% and 10% in a ball mill for 6 hours. From this standard sample specimens were produced using uniaxial compression after mixing each mixture with 10% moisture of clay contents. The compressed samples were sintered at 9500C and soaked for one hour. The sintered samples were characterized for various physic-mechanical properties using state of the art equipment’s. The fired samples were also characterized using ultra-high-resolution field emission scanning electron microscope (UHR-FEGSEM equipped with energy dispersive spectroscopy (EDX. It was observed that the apparent porosity and water absorption of the clay bonded carbonized palm kernel shell ceramic increased with increased amount of saw dust admixture, cold crushing strength, Young’ modulus of elasticity and absorbed energy of the sample reduced with increased amount of saw dust admixture. It was concluded that the sample with 0% saw dust admixture is judged to possess optimum physic-mechanical properties.

  16. Quantum Mechanics at the Crossroads New Perspectives from History, Philosophy and Physics

    CERN Document Server

    Evans, James

    2007-01-01

    Quantum mechanics is a beautiful, strange and successful theory that originated in the 1920s. The theory, which Niels Bohr regarded as finished and complete, has in the last few decades rapidly developed in unexpected directions. An intense new focus on the stranger aspects of the theory, including entanglement and nonlocality, has resulted in new perceptions of the foundations of quantum mechanics, as well as surprising new exploitations of quantum phenomena. Historians and philosophers of science have also renewed their attention to quantum mechanics, opening up its human dimensions and asking searching questions about its meaning. This volume brings together new insights from different vantage points: Historians of physics, such as J. L. Heilbron; philosophers of science, such as Abner Shimony and Michel Bitbol; and quantum physicists, such as Wolfgang Ketterle and Roland Omnès, join forces to tackle essential questions in quantum mechanics and its interpretation. All the authors have written for a broad ...

  17. Investigating and Improving Student Understanding of Key Ideas in Quantum Mechanics throughout Instruction

    Science.gov (United States)

    Emigh, Paul Jeffrey

    This dissertation describes research on student understanding of quantum mechanics across multiple levels of instruction. The primary focus has been to identify patterns in student reasoning related to key concepts in quantum mechanics. The specific topics include quantum measurements, time dependence, vector spaces, and angular momentum. The research has spanned a variety of different quantum courses intended for introductory physics students, upper-division physics majors, and graduate students in physics. The results of this research have been used to develop a set of curriculum, Tutorials in Physics: Quantum Mechanics, for addressing the most persistent student difficulties. We document both the development of this curriculum and how it has impacted and improved student understanding of quantum mechanics.

  18. Simplifications and Idealizations in High School Physics in Mechanics: A Study of Slovenian Curriculum and Textbooks

    Science.gov (United States)

    Forjan, Matej; Sliško, Josip

    2014-01-01

    This article presents the results of an analysis of three Slovenian textbooks for high school physics, from the point of view of simplifications and idealizations in the field of mechanics. In modeling of physical systems, making simplifications and idealizations is important, since one ignores minor effects and focuses on the most important…

  19. PHYSICAL OBJECT-ORIENTED MODELING IN DEVELOPMENT OF INDIVIDUALIZED TEACHING AND ORGANIZATION OF MINI-RESEARCH IN MECHANICS COURSES

    Directory of Open Access Journals (Sweden)

    Alexander S. Chirtsov

    2017-03-01

    Full Text Available Subject of Research. The paper presents a relatively simple method to develop interactive computer models of physical systems without computer programming skills or automatic generation of the numerical computer code for the complex physical systems. Developed computer models are available over the Internet for educational purposes and can be edited by users in an unlimited number of possibilities. An applicability of computer simulations for the massive open individualized teaching and an organization of undergraduate research are also discussed. Method. The presented approach employs an original physical object-oriented modeling method, which is an extension of object-oriented programming ideas to tasks of developing simulations of the complex physical systems. In this framework, a computer model of the physical system is constructed as a set of interconnected computer objects simulating the system components: particles and fields. Interactions between the system components are described by self-adapting algorithms that are specified during the model initiation stage and are set according to either the classical or relativistic approach. The utilized technique requires neither a priori knowledge regarding an evolution of the physical system nor a formulation of differential equations describing the physical system. Main Results. Testing of the numerical implementation and an accuracy of the algorithms was performed with the use of benchmarks with the known analytical solutions. The developed method - a physical reality constructor - has provided an opportunity to assemble a series of computer models to demonstrate physical phenomena studied in the high school and university mechanic courses. More than 150 original interactive models were included into the collections of multi-level multimedia resources to support teaching of the mechanics. The physical reality constructor was successfully tested to serve as a test bed for the independent

  20. The use of physical and virtual manipulatives in an undergraduate mechanical engineering (Dynamics) course

    Science.gov (United States)

    Pan, Edward A.

    Science, technology, engineering, and mathematics (STEM) education is a national focus. Engineering education, as part of STEM education, needs to adapt to meet the needs of the nation in a rapidly changing world. Using computer-based visualization tools and corresponding 3D printed physical objects may help nontraditional students succeed in engineering classes. This dissertation investigated how adding physical or virtual learning objects (called manipulatives) to courses that require mental visualization of mechanical systems can aid student performance. Dynamics is one such course, and tends to be taught using lecture and textbooks with static diagrams of moving systems. Students often fail to solve the problems correctly and an inability to mentally visualize the system can contribute to student difficulties. This study found no differences between treatment groups on quantitative measures of spatial ability and conceptual knowledge. There were differences between treatments on measures of mechanical reasoning ability, in favor of the use of physical and virtual manipulatives over static diagrams alone. There were no major differences in student performance between the use of physical and virtual manipulatives. Students used the physical and virtual manipulatives to test their theories about how the machines worked, however their actual time handling the manipulatives was extremely limited relative to the amount of time they spent working on the problems. Students used the physical and virtual manipulatives as visual aids when communicating about the problem with their partners, and this behavior was also seen with Traditional group students who had to use the static diagrams and gesture instead. The explanations students gave for how the machines worked provided evidence of mental simulation; however, their causal chain analyses were often flawed, probably due to attempts to decrease cognitive load. Student opinions about the static diagrams and dynamic

  1. Identifying social mechanisms for the prevention of adolescent drinking and driving.

    Science.gov (United States)

    Chen, Meng-Jinn; Grube, Joel W; Nygaard, Peter; Miller, Brenda A

    2008-03-01

    This study identifies social mechanisms that might help prevent youth from being involved in driving under the influence of alcohol (DUI) and riding with drinking drivers (RWDD). Data collected through telephone surveys with 1534 adolescents and young adults aged 15-20 years (mean=17.6, S.D.=1.6) in California, USA, were analyzed. Structural equation modeling analyses showed that DUI and RWDD were strongly related to drinking in unstructured situations, modeling of DUI by peers and parents, and perceived peer approval or disapproval of DUI. DUI outcome expectancies were indirectly related to DUI and RWDD through situational drinking. Parental monitoring and DUI law enforcement were also indirectly related to DUI and RWDD through DUI expectancies and other mechanisms. The findings, overall, suggest that parental influence remains important even through late adolescence. Parental monitoring, in particular, might help to reduce unstructured socializing with peers, drinking, and affiliation with peers who engage in DUI. Parental monitoring may also foster beliefs about the risks of DUI. Conversely, parents' own DUI behavior may normalize drinking and DUI behaviors, thus countering monitoring efforts.

  2. Identifying Social Mechanisms for the Prevention of Adolescent Drinking and Driving

    Science.gov (United States)

    Chen, Meng-Jinn; Grube, Joel W.; Nygaard, Peter; Miller, Brenda A.

    2008-01-01

    This study identifies social mechanisms that might help prevent youth from being involved in driving under the influence of alcohol (DUI) and riding with drinking drivers (RWDD). Data collected through telephone surveys with 1,534 adolescents and young adults aged 15–20 years (mean = 17.6, SD = 1.6) in California, USA were analyzed. Structural equation modeling analyses showed that DUI and RWDD were strongly related to drinking in unstructured situations, modeling of DUI by peers and parents, and perceived peer approval or disapproval of DUI. DUI outcome expectancies were indirectly related to DUI and RWDD through situational drinking. Parental monitoring and DUI law enforcement were also indirectly related to DUI and RWDD through DUI expectancies and other mechanisms. The findings, overall, suggest that parental influence remains important even through late adolescence. Parental monitoring, in particular, might help to reduce unstructured socializing with peers, drinking, and affiliation with peers who engage in DUI. Parental monitoring may also foster beliefs about the risks of DUI. Conversely, parents’ own DUI behavior may normalize drinking and DUI behaviors, thus countering monitoring efforts. PMID:18329409

  3. Tutorium quantum mechanics. By an experienced tutor for students of physics and mathematics

    International Nuclear Information System (INIS)

    Schwindt, Jan-Markus

    2013-01-01

    Tutorium quantum mechanics is a book, written by an experiences tutor for all, who finally want to understand from the beginning physics and mathematics of quantum mechanics. The book treats the matter of the corresponding course in the framework of theoretical physics. The main topic lies in this book on the general postulates of quantum mechanics and the clarification of the fundamental terms. What is precisely a Hilbert space? What is an Hermitian operator? A tensor product? An entangled state? To what extend wave functions are vectors? The postulates raise until today also many questions concerning their interpretation. This is discussed in a separate chapter. This book is structured in such a way that each step and each new term is explained by means of simple examples. The author attaches great importance to the clarity of the applied mathematics - something, what he and many students in other textbooks had hitherto to miss. By this main topic is also very well suited for mathematicists, who want to deal with the issue. In the examination preparation the book is especially well suited for the clarification of terms and questions of understanding. The questions of understanding and the exercise problems interspersed in the text with solutions support additionally the learning and the preparation for examination.

  4. Complex Reaction Kinetics in Chemistry: A Unified Picture Suggested by Mechanics in Physics

    Directory of Open Access Journals (Sweden)

    Elena Agliari

    2018-01-01

    Full Text Available Complex biochemical pathways can be reduced to chains of elementary reactions, which can be described in terms of chemical kinetics. Among the elementary reactions so far extensively investigated, we recall the Michaelis-Menten and the Hill positive-cooperative kinetics, which apply to molecular binding and are characterized by the absence and the presence, respectively, of cooperative interactions between binding sites. However, there is evidence of reactions displaying a more complex pattern: these follow the positive-cooperative scenario at small substrate concentration, yet negative-cooperative effects emerge as the substrate concentration is increased. Here, we analyze the formal analogy between the mathematical backbone of (classical reaction kinetics in Chemistry and that of (classical mechanics in Physics. We first show that standard cooperative kinetics can be framed in terms of classical mechanics, where the emerging phenomenology can be obtained by applying the principle of least action of classical mechanics. Further, since the saturation function plays in Chemistry the same role played by velocity in Physics, we show that a relativistic scaffold naturally accounts for the kinetics of the above-mentioned complex reactions. The proposed formalism yields to a unique, consistent picture for cooperative-like reactions and to a stronger mathematical control.

  5. Identifying Strategies Programs Adopt to Meet Healthy Eating and Physical Activity Standards in Afterschool Programs.

    Science.gov (United States)

    Weaver, Robert G; Moore, Justin B; Turner-McGrievy, Brie; Saunders, Ruth; Beighle, Aaron; Khan, M Mahmud; Chandler, Jessica; Brazendale, Keith; Randell, Allison; Webster, Collin; Beets, Michael W

    2017-08-01

    The YMCA of USA has adopted Healthy Eating and Physical Activity (HEPA) Standards for its afterschool programs (ASPs). Little is known about strategies YMCA ASPs are implementing to achieve Standards and these strategies' effectiveness. (1) Identify strategies implemented in YMCA ASPs and (2) evaluate the relationship between strategy implementation and meeting Standards. HEPA was measured via accelerometer (moderate-to-vigorous-physical-activity [MVPA]) and direct observation (snacks served) in 20 ASPs. Strategies were identified and mapped onto a capacity building framework ( Strategies To Enhance Practice [STEPs]). Mixed-effects regression estimated increases in HEPA outcomes as implementation increased. Model-implied estimates were calculated for high (i.e., highest implementation score achieved), moderate (median implementation score across programs), and low (lowest implementation score achieved) implementation for both HEPA separately. Programs implemented a variety of strategies identified in STEPs. For every 1-point increase in implementation score 1.45% (95% confidence interval = 0.33% to 2.55%, p ≤ .001) more girls accumulated 30 min/day of MVPA and fruits and/or vegetables were served on 0.11 more days (95% confidence interval = 0.11-0.45, p ≤ .01). Relationships between implementation and other HEPA outcomes did not reach statistical significance. Still regression estimates indicated that desserts are served on 1.94 fewer days (i.e., 0.40 vs. 2.34) in the highest implementing program than the lowest implementing program and water is served 0.73 more days (i.e., 2.37 vs. 1.64). Adopting HEPA Standards at the national level does not lead to changes in routine practice in all programs. Practical strategies that programs could adopt to more fully comply with the HEPA Standards are identified.

  6. On the Meaning of Element in the Science of Italic Tradition, the Question of Physical Objectivity (and/or Physical Meaning) and Quantum Mechanics

    Science.gov (United States)

    Boscarino, Giuseppe

    2006-06-01

    It is questioned: Is quantum mechanics a new science or a new (or rather old) philosophy of physical science? It is shown that Einstein's attempt in his article of 1935 to bring the concept of "element" from the classical (we call it Italic) philosophical-epistemological tradition, which goes under the names of Pythagoras Parmenides, Democritus, and Newton, into quantum mechanical theory is unclear, inadequate and contradictory.

  7. Rock Burst Mechanics: Insight from Physical and Mathematical Modelling

    Directory of Open Access Journals (Sweden)

    J. Vacek

    2008-01-01

    Full Text Available Rock burst processes in mines are studied by many groups active in the field of geomechanics. Physical and mathematical modelling can be used to better understand the phenomena and mechanisms involved in the bursts. In the present paper we describe both physical and mathematical models of a rock burst occurring in a gallery of a coal mine.For rock bursts (also called bumps to occur, the rock has to possess certain particular rock burst properties leading to accumulation of energy and the potential to release this energy. Such materials may be brittle, or the rock burst may arise at the interfacial zones of two parts of the rock, which have principally different material properties (e.g. in the Poíbram uranium mines.The solution is based on experimental and mathematical modelling. These two methods have to allow the problem to be studied on the basis of three presumptions:· the solution must be time dependent,· the solution must allow the creation of cracks in the rock mass,· the solution must allow an extrusion of rock into an open space (bump effect. 

  8. Primary physical mechanism of different magnetic fields action on roots of some plants

    Directory of Open Access Journals (Sweden)

    N. V. Sheykina

    2017-12-01

    Full Text Available Background: Though the magnetic field action on biological object is proved now by many experiments it cannot be explained. The counterarguments are the small value of magnetic induction, that is effective for static magnetic field and the small value of ions free path length for ion cyclotron resonance presence.   Objectives of the article were to generalize all the results that had been obtained before in static, alternative and combined magnetic fields and to explain all results by one and the same primary physical mechanism. Materials and methods that were used to obtain experimental results were based on the using of well reproducible magnetic conditions. For this purpose 3 lays µ-metal shield and superconductive shield with warm volume were used. The artificial magnetic field was created in the shield. The objects of the investigation were roots of cress, maize and pea. Their gravitropic reaction was studied. Results and discussion: All experimental results were compared with the theories and calculations maid before and following from the three mechanisms proposed below.  It was shown that there were three physical primary mechanisms that could lead to effect of low frequency alternative and combined magnetic fields and permanent magnetic field on gravitropic reaction in plants. All of them depended on the relative location of roots, gravity and components of permanent and alternative magnetic fields between themselves. The first mechanism is based on the classic model of the rotation of ions in the plane that is perpendicular to the magnetic field direction or precession of magnetic moments round the direction of magnetic field vector. The second mechanism is connected with the piezoelectric properties of starch grain (porous piezoelectricity. This property of starch may create the change in the moving of starch grains in alternative and combined magnetic fields, and even in static one. The third mechanism is caused by the phase

  9. Physics of the mechanical toy Gee-Haw Whammy Diddle.

    Science.gov (United States)

    Marek, Martin; Badin, Matej; Plesch, Martin

    2018-02-27

    Gee-Haw Whammy Diddle is a seemingly simple mechanical toy consisting of a wooden stick and a second stick that is made up of a series of notches with a propeller at its end. When the wooden stick is pulled over the notches, the propeller starts to rotate. Despite its simplicity, physical principles governing the motion of the stick and the propeller are rather complicated and interesting. Here we provide a thorough analysis of the system and parameters influencing the motion. We show that contrary to the results published on this topic so far, neither elliptic motion of the stick nor frequency synchronization is needed for starting a stable motion of the propeller.

  10. Conceptual citation frequency - quantum mechanics and elementary particle physics

    International Nuclear Information System (INIS)

    Hurt, C.D.

    1986-01-01

    The differences in conceptual citation frequency are examined between quantum mechanics literature and elementary particle physics literature. Using a sample based on increments of 5 years, 7 contrast tests were generated over a literature period of 35 years. A Dunn planned comparison procedure indicated a statistical difference in years 5 and 10 but no differences were found in the remaining years. The results must be weighed against the time frames in which the literature was produced but clearly point to an initial difference in the two areas. Additional work is required to reevaluate the findings and to investigate the conceptual citation frequency issue further. The frequency distribution generated approximates a cumulative advantage process. (author)

  11. Physics and Mechanics of Cometary Materials

    International Nuclear Information System (INIS)

    Hunt, J.; Guyenne, T.D.

    1989-01-01

    In these proceedings the following questions are reported: comet missions and comet models, review of physical and compositional comet nucleus models, physical and chemical properties of ices and ice-dust mixtures

  12. Influence of radiative irradiation on structure and physical-mechanical properties of polyolefins

    International Nuclear Information System (INIS)

    Kakhramanov, N.T.; Mamedova, N.A.; Gasanova, A.A.

    2014-01-01

    Full text : Today in the world it is synthesized a large number of polymer materials, which in one or another way satisfy the requirements for plastic construction products used in the various branches of industry and agriculture. In this work the main attention is paid to investigation of influence of radiative irradiation dose on structural peculiarities and basic physical-mechanical characteristics of cross-linked polyolefins

  13. Characteristics of physical loads endured by military officers of mechanized troops during field maneuvres

    Directory of Open Access Journals (Sweden)

    I.L. Shlyamar

    2015-09-01

    Full Text Available Purpose: observation over influence of physical loads on military officers in process of acquiring and mastering of military applied skills during field maneuvers. Material: in experiment 120 military officers of 20-25 years old age with equal physical fitness participated. Results: it was determined that in period of field maneuvers the greatest load was endured by military officers in attack exercises and on the march. The least physical loads were in period of organization and fulfillment of combat shooting. It was also established that main part of motor actions was fulfilled in aerobic mode. Military officers’ functioning in field maneuvers was accompanied by heart beats rate of 120-150 b.p.m. and 60-90 b.p.m. during long time. Conclusions: We offered to practice physical training of mechanized units’ military officers in modes, close to field ones.

  14. Physical Chemistry Chemical Kinetics and Reaction Mechanism

    CERN Document Server

    Trimm, Harold H

    2011-01-01

    Physical chemistry covers diverse topics, from biochemistry to materials properties to the development of quantum computers. Physical chemistry applies physics and math to problems that interest chemists, biologists, and engineers. Physical chemists use theoretical constructs and mathematical computations to understand chemical properties and describe the behavior of molecular and condensed matter. Their work involves manipulations of data as well as materials. Physical chemistry entails extensive work with sophisticated instrumentation and equipment as well as state-of-the-art computers. This

  15. Physical nonexistence of signals going backwards in time, and quantum mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Garuccio, A. (Bari Univ. (Italy). Ist. di Fisica; Istituto Nazionale di Fisica Nucleare, Bari (Italy)); Maccarrone, G.D. (Catania Univ. (Italy). Scuola di Specializzazione in Fisica); Recami, E. (Catania Univ. (Italy). Ist. di Fisica; Istituto Nazionale di Fisica Nucleare, Catania (Italy); Centro Siciliano di Fisica Nucleare e Struttura della Materia, Catania (Italy))

    1980-01-12

    With regard to the recent results of new experiments about the EPR-paradox, which seem to disagree with Bell inequality and appear to confirm quantum mechanics, some theoretical interpretations have been proposed. In this letter, it is shown that the interpretations invoking transmission of signals into the past do not seem to be physically acceptable. The positive role of the ''Reinterpretation Principle'' (for an orthodox reinterpretation of the ''advanced solutions'') is in particular stressed.

  16. Identifying Country-Specific Cultures of Physics Education: A differential item functioning approach

    Science.gov (United States)

    Mesic, Vanes

    2012-11-01

    In international large-scale assessments of educational outcomes, student achievement is often represented by unidimensional constructs. This approach allows for drawing general conclusions about country rankings with respect to the given achievement measure, but it typically does not provide specific diagnostic information which is necessary for systematic comparisons and improvements of educational systems. Useful information could be obtained by exploring the differences in national profiles of student achievement between low-achieving and high-achieving countries. In this study, we aimed to identify the relative weaknesses and strengths of eighth graders' physics achievement in Bosnia and Herzegovina in comparison to the achievement of their peers from Slovenia. For this purpose, we ran a secondary analysis of Trends in International Mathematics and Science Study (TIMSS) 2007 data. The student sample consisted of 4,220 students from Bosnia and Herzegovina and 4,043 students from Slovenia. After analysing the cognitive demands of TIMSS 2007 physics items, the correspondent differential item functioning (DIF)/differential group functioning contrasts were estimated. Approximately 40% of items exhibited large DIF contrasts, indicating significant differences between cultures of physics education in Bosnia and Herzegovina and Slovenia. The relative strength of students from Bosnia and Herzegovina showed to be mainly associated with the topic area 'Electricity and magnetism'. Classes of items which required the knowledge of experimental method, counterintuitive thinking, proportional reasoning and/or the use of complex knowledge structures proved to be differentially easier for students from Slovenia. In the light of the presented results, the common practice of ranking countries with respect to universally established cognitive categories seems to be potentially misleading.

  17. Effect of moisture content on some physical and mechanical properties of juvenile rubberwood (Hevea brasiliensis Muell. Arg.

    Directory of Open Access Journals (Sweden)

    Buhnnum Kyokong

    2003-05-01

    Full Text Available Moisture content of rubberwood is an important factor influencing its physical and mechanical behaviours. This research aimed at quantifying effect of moisture content on physical and mechanical properties of juvenile rubberwood core. The specimens at various moisture contents were tested in compression and shear parallel to grain. Information was gathered to determine shrinkage, density and specific gravity of specimens. The equilibrium moisture content determined from desorption experiment, was well described by the Hailwood-Horrobin solution theory. Moisture content of 23+4% best represented the value of apparent fiber saturation point, Mp, determined from physical and mechanical properties data. Above Mp, values of all physical and mechanical properties examined were fairly constant. Maximum volumetric shrinkage from moisture content above Mp to an oven-dry condition was 8.2+1.8%. Specific gravity and density were 0.55+0.03 and 614+30 kg/m3 at 12% moisture content. Below Mp, ultimate compressive stress (UCS parallel to grain, ultimate shear stress parallel to grain, modulus of elasticity (MOE for compression parallel to grain, and shear modulus parallel to grain increased exponentially with decreasing moisture content. Shear strain at fracture and work to fracture of shear parallel to grain were found to increase as moisture content decreased below Mp and attained the maximum values at 20% and 12% moisture content, respectively. The values decreased with further lowering of the level of moisture content. Ultimate compressive stress (UCS parallel to grain was closely correlated with specific gravity and was more sensitive to changes in moisture content at higher specific gravity level.

  18. Quantum Mechanics as Classical Physics

    OpenAIRE

    Sebens, CT

    2015-01-01

    Here I explore a novel no-collapse interpretation of quantum mechanics which combines aspects of two familiar and well-developed alternatives, Bohmian mechanics and the many-worlds interpretation. Despite reproducing the empirical predictions of quantum mechanics, the theory looks surprisingly classical. All there is at the fundamental level are particles interacting via Newtonian forces. There is no wave function. However, there are many worlds.

  19. Effects of postpolymerization microwave irradiation on provisional dental acrylics: physical and mechanical properties.

    Science.gov (United States)

    Ozkomur, Ahmet; Fortes, Carmen Beatriz Borges

    2016-07-26

    This study aimed to evaluate the effects of microwave irradiation on the physical and mechanical properties of poly(methyl methacrylate) (PMMA) provisional resins. Twenty bars and 20 disc-shaped specimens were fabricated for each selected provisional restorative material (Dencor and Duralay). Test groups were subjected to microwave irradiation (3 minutes at 600 W) after polymerization. Bar specimens were subjected to a flexural strength test. Disc-shaped specimens were used to evaluate microhardness. Backscattered Raman spectroscopy was employed for each group to define the degree of conversion of the monomer/polymer. The frequency bands corresponding to C = C and C = O groups were used to determine the conversion of methyl methacrylate (MMA) monomers into polymers. Glass transition temperature was determined using a differential scanning calorimeter. Microwave irradiation of both tested autopolymerizing PMMA provisional materials resulted in a statistically significant increase in microhardness, degree of conversion and glass transition temperature values. Also, the results demonstrated a significant increase in flexural strength after postpolymerization microwave irradiation for the Dencor specimens. It is concluded that mechanical and physical properties are positively influenced by microwave irradiation.

  20. The effects of weathering on the physical and mechanical properties of igneous and metamorphic saprolites

    DEFF Research Database (Denmark)

    Rocchi, Irene; Coop, M. R.; Maccarini, M.

    2017-01-01

    The present paper presents three extensive datasets of laboratory testing on weathered geomaterials, which are emblematic of soil types widely found worldwide. The overall dataset includes soils originating from igneous and metamorphic rocks, either coarse or fine grained and having either felsic...... or mafic minerals. In particular, the data are interpreted to highlight the effects that weathering has on the physical and mechanical properties of these natural geomaterials comparing them with published data with the aim to provide a general framework of interpretation that takes into account...... this geological process and links soil mechanics to engineering geology. Generally, weathering induces a reduction in the grain size, both due to physical actions (e.g. opening of grain contacts) and to the chemical decomposition of minerals resulting in the formation of clay minerals. As weathering proceeds...

  1. Determination and Investigation of Some Physical and Mechanical Properties of Date Fruit (Kabkab Variety

    Directory of Open Access Journals (Sweden)

    A. M. Kermani

    2015-01-01

    Full Text Available Knowledge on physical and mechanical properties of fruits is necessary for designing and optimizing processing systems. In this study, several physical and mechanical properties of date fruit (Kabkab cultivar and its seed were determined. The average of length, width, thickness, unit mass, 1000 fruit mass, geometric mean diameter, unit volume, surface and projected areas, sphericity, fruit true and bulk densities, porosity of Kabkab cultivar date fruit were 36.89, 18.68, 23.56 mm, 8264.07 and 8.25 g, 25.24 mm, 8507.8 mm3, 2008.27 mm2, 502.07 mm2, 0.96 g/cm3, 0.51 g/cm3, 46.20%, respectively. The respective values for its seeds were 22.98, 6.25, 7.48 mm, 789.2 and 0.79 g, 10.23 mm, 568.24 mm3, 330.30 mm2, 82.58 mm2, 0.99 g/cm3, 0.65 g/cm3, 30.45%, respectively. The static coefficients of friction were 0.34 for galvanized, 0.30 for steel, 0.32 for plexiglass, 0.31 for glass and 0.42 for plywood. Compressive loading testes were conducted at three loading rates of 5, 15 and 25 mm/min for deformation of fruit until 15%, 30% and 45% of thickness of fruit with seven replications. Some mechanical parameters such as force-deformation, energy and toughness were determined. The results showed that the loading rates affected the mechanical parameters significantly. By increasing the loading rate, the mean values of the mechanical parameters increased significantly.

  2. Possibilities for modelling the effect of compression on mechanical and physical properties of various Dutch soil types

    NARCIS (Netherlands)

    Perdok, U.D.; Kroesbergen, B.; Hoogmoed, W.B.

    2002-01-01

    The state of compactness of the arable soil layer changes during the growing season as a result of tillage and traction. The aim of this study was to assess and predict some soil mechanical and physical properties governing machine performance and crop response. The following mechanical properties

  3. Dynamics in microbial communities: Unraveling mechanisms to identify principles

    Energy Technology Data Exchange (ETDEWEB)

    Konopka, Allan; Lindemann, Stephen R.; Fredrickson, Jim K.

    2015-07-01

    Diversity begets higher order properties such as functional stability and robustness in microbial communities, but principles that inform conceptual (and eventually predictive) models of community dynamics are lacking. Recent work has shown that selection as well as dispersal and drift shape communities, but the mechanistic bases for assembly of communities and the forces that maintain their function in the face of environmental perturbation are not well understood. Conceptually, some interactions among community members could generate endogenous dynamics in composition, even in the absence of environmental changes. These endogenous dynamics are further perturbed by exogenous forcing factors to produce a richer network of community interactions, and it is this “system” that is the basis for higher order community properties. Elucidation of principles that follow from this conceptual model requires identifying the mechanisms that (a) optimize diversity within a community and (b) impart community stability. The network of interactions between organisms can be an important element by providing a buffer against disturbance beyond the effect of functional redundancy, as alternative pathways with different combinations of microbes can be recruited to fulfill specific functions.

  4. Empirical correlation between mechanical and physical parameters of irradiated pressure vessel steels

    International Nuclear Information System (INIS)

    Tipping, P.; Solt, G.; Waeber, W.

    1991-02-01

    Neutron irradiation embrittlement of nuclear reactor pressure vessel (PV) steels is one of the best known ageing factors of nuclear power plants. If the safety limits set by the regulators for the PV steel are not satisfied any more, and other measures are too expensive for the economics of the plant, this embrittlement could lead to the closure of the plant. Despite this, the fundamental mechanisms of neutron embrittlement are not yet fully understood, and usually only empirical mathematical models exist to asses neutron fluence effects on embrittlement, as given by the Charpy test for example. In this report, results of a systematic study of a French forging (1.2 MD 07 B), irradiated to several fluences will be reported. Mechanical property measurements (Charpy tensile and Vickers microhardness), and physical property measurements (small angle neutron scattering - SANS), have been done on specimens having the same irradiation or irradiation-annealing-reirradiation treatment histories. Empirical correlations have been established between the temperature shift and the decrease in the upper shelf energy as measured on Charpy specimens and tensile stresses and hardness increases on the one hand, and the size of the copper-rich precipitates formed by the irradiation on the other hand. The effect of copper (as an impurity element) in enhancing the degradation of mechanical properties has been demonstrated; the SANS measurements have shown that the size and amount of precipitates are important. The correlations represent the first step in an effort to develop a description of neutron irradiation induced embrittlement which is based on physical models. (author) 6 figs., 27 refs

  5. Sustaining Physics Teacher Education Coalition programs in physics teacher education

    Directory of Open Access Journals (Sweden)

    Rachel E. Scherr

    2017-02-01

    Full Text Available Understanding the mechanisms of increasing the number of physics teachers educated per year at institutions with thriving physics teacher preparation programs may inspire and support other institutions in building thriving programs of their own. The Physics Teacher Education Coalition (PhysTEC, led by the American Physical Society (APS and the American Association of Physics Teachers (AAPT, has supported transformation of physics teacher preparation programs at a number of institutions around the country for over a decade. In 2012–2013, PhysTEC supported an independent study on the sustainability of its sites after project funding ends. The study sought to measure the extent to which programs have been sustained and to identify what features should be prioritized for building sustainable physics teacher preparation programs. Most of the studied sites have sustained increases in the number of physics teachers educated per year as well as funding for physics teacher preparation. About half of the programs are thriving, in that in the post-award period, they have further increased both the number of physics teachers educated per year and funding for physics teacher preparation. All studied sites that sustained increases in the number of physics teachers educated per year have two features in common: a champion of physics teacher education and institutional commitment. The thriving physics teacher preparation programs in this study implemented different elements of physics teacher preparation according to diverse local priorities and opportunities, including the unique expertise of local personnel.

  6. Identifying the receptor subtype selectivity of retinoid X and retinoic acid receptors via quantum mechanics.

    Science.gov (United States)

    Tsuji, Motonori; Shudo, Koichi; Kagechika, Hiroyuki

    2017-03-01

    Understanding and identifying the receptor subtype selectivity of a ligand is an important issue in the field of drug discovery. Using a combination of classical molecular mechanics and quantum mechanical calculations, this report assesses the receptor subtype selectivity for the human retinoid X receptor (hRXR) and retinoic acid receptor (hRAR) ligand-binding domains (LBDs) complexed with retinoid ligands. The calculated energies show good correlation with the experimentally reported binding affinities. The technique proposed here is a promising method as it reveals the origin of the receptor subtype selectivity of selective ligands.

  7. People who perceive themselves as active cannot identify the intensity recommended by the international physical activity guidelines

    Directory of Open Access Journals (Sweden)

    Prokop NW

    2014-10-01

    Full Text Available Neal W Prokop,1 Travis JR Hrubeniuk,1 Martin Sénéchal,2,3 Danielle R Bouchard1,4 1Faculty of Kinesiology and Recreation Management, University of Manitoba, Winnipeg, Manitoba, Canada; 2Manitoba Institute of Child Health, Winnipeg, Manitoba, Canada; 3Department of Pediatrics and Child Health, Faculty of Medicine, University of Manitoba, Winnipeg, Manitoba, Canada; 4Health, Leisure, and Human Performance Research Institute, Winnipeg, Manitoba, Canada Background: Many national and international organizations recommend that adults achieve at least 150 minutes of aerobic physical activity (PA weekly, at a minimum moderate intensity to optimize health benefits. It is unknown if people who consider themselves as active have the ability to identify what is considered moderate intensity. Methods: Fifty-one participants who reported achieving a minimum 150 minutes per week at a minimum of moderate intensity PA were recruited through a local fitness facility. All participants underwent a single assessment involving questionnaires, clinical measures, and a treadmill test to measure the ability to perceive moderate intensity. Following the visit, participants' PA level was evaluated by heart rate monitor, while exercising, for 7 consecutive days. Results: Eighty percent of participants overestimated moderate intensity on the treadmill test; they were at vigorous intensity compared to what is considered moderate. Only 11.8% of participants accurately identified moderate intensity; all of them were women (P=0.03, had a high level of education (P=0.04, and knew that moderate intensity was the minimum intensity recommended by health organizations (P<0.01. Only 69.2% of participants reached the aerobic component of the International Physical Activity Guidelines with no significant advantage for those correctly identifying moderate intensity. Conclusion: Most people who perceive themselves as active are exercising at vigorous intensity while believing they are

  8. Towards identifying the mechanisms underlying field-aligned edge-loss of HHFW power on NSTX

    International Nuclear Information System (INIS)

    Perkins, R. J.; Bell, R. E.; Bertelli, N.; Diallo, A.; Gerhardt, S.; Hosea, J. C.; Jaworski, M. A.; LeBlanc, B. P.; Kramer, G. J.; Maingi, R.; Phillips, C. K.; Podestà, M.; Roquemore, L.; Scotti, F.; Taylor, G.; Wilson, J. R.; Ahn, J-W.; Gray, T. K.; Green, D. L.; McLean, A.

    2014-01-01

    Fast-wave heating will be a major heating scheme on ITER, as it can heat ions directly and is relatively unaffected by the large machine size unlike neutral beams. However, fast-wave interactions with the plasma edge can lead to deleterious effects such as, in the case of the high-harmonic fast-wave (HHFW) system on NSTX, large losses of fast-wave power in the scrape off layer (SOL) under certain conditions. In such scenarios, a large fraction of the lost HHFW power is deposited on the upper and lower divertors in bright spiral shapes. The responsible mechanism(s) has not yet been identified but may include fast-wave propagation in the scrape off layer, parametric decay instability, and RF currents driven by the antenna reactive fields. Understanding and mitigating these losses is important not only for improving the heating and current-drive on NSTX-Upgrade but also for understanding fast-wave propagation across the SOL in any fast-wave system. This talk summarizes experimental results demonstrating that the flow of lost HHFW power to the divertor regions largely follows the open SOL magnetic field lines. This lost power flux is relatively large close to both the antenna and the last closed flux surface with a reduced level in between, so the loss mechanism cannot be localized to the antenna. At the same time, significant losses also occur along field lines connected to the inboard edge of the bottom antenna plate. The power lost within the spirals is roughly estimated, showing that these field-aligned losses to the divertor are significant but may not account for the total HHFW loss. To elucidate the role of the onset layer for perpendicular fast-wave propagation with regards to fast-wave propagation in the SOL, a cylindrical cold-plasma model is being developed. This model, in addition to advanced RF codes such as TORIC and AORSA, is aimed at identifying the underlying mechanism(s) behind these SOL losses, to minimize their effects in NSTX-U, and to predict

  9. Towards identifying the mechanisms underlying field-aligned edge-loss of HHFW power on NSTX

    Energy Technology Data Exchange (ETDEWEB)

    Perkins, R. J.; Bell, R. E.; Bertelli, N.; Diallo, A.; Gerhardt, S.; Hosea, J. C.; Jaworski, M. A.; LeBlanc, B. P.; Kramer, G. J.; Maingi, R.; Phillips, C. K.; Podestà, M.; Roquemore, L.; Scotti, F.; Taylor, G.; Wilson, J. R. [Princeton Plasma Physics Laboratory, Princeton, NJ (United States); Ahn, J-W.; Gray, T. K.; Green, D. L.; McLean, A. [Oak Ridge National Laboratory, Oak Ridge, TN (United States); and others

    2014-02-12

    Fast-wave heating will be a major heating scheme on ITER, as it can heat ions directly and is relatively unaffected by the large machine size unlike neutral beams. However, fast-wave interactions with the plasma edge can lead to deleterious effects such as, in the case of the high-harmonic fast-wave (HHFW) system on NSTX, large losses of fast-wave power in the scrape off layer (SOL) under certain conditions. In such scenarios, a large fraction of the lost HHFW power is deposited on the upper and lower divertors in bright spiral shapes. The responsible mechanism(s) has not yet been identified but may include fast-wave propagation in the scrape off layer, parametric decay instability, and RF currents driven by the antenna reactive fields. Understanding and mitigating these losses is important not only for improving the heating and current-drive on NSTX-Upgrade but also for understanding fast-wave propagation across the SOL in any fast-wave system. This talk summarizes experimental results demonstrating that the flow of lost HHFW power to the divertor regions largely follows the open SOL magnetic field lines. This lost power flux is relatively large close to both the antenna and the last closed flux surface with a reduced level in between, so the loss mechanism cannot be localized to the antenna. At the same time, significant losses also occur along field lines connected to the inboard edge of the bottom antenna plate. The power lost within the spirals is roughly estimated, showing that these field-aligned losses to the divertor are significant but may not account for the total HHFW loss. To elucidate the role of the onset layer for perpendicular fast-wave propagation with regards to fast-wave propagation in the SOL, a cylindrical cold-plasma model is being developed. This model, in addition to advanced RF codes such as TORIC and AORSA, is aimed at identifying the underlying mechanism(s) behind these SOL losses, to minimize their effects in NSTX-U, and to predict

  10. Lifetimes of organic photovoltaics: Combining chemical and physical characterisation techniques to study degradation mechanisms

    DEFF Research Database (Denmark)

    Norrman, K.; Larsen, N.B.; Krebs, Frederik C

    2006-01-01

    Degradation mechanisms of a photovoltaic device with an Al/C-60/C-12-PSV/PEDOT:PSS/ITO/glass geometry was studied using a combination of in-plane physical and chemical analysis techniques: TOF-SIMS, AFM, SEM, interference microscopy and fluorescence microscopy. A comparison was made between...

  11. The planning of Mechanics and Modern Physics teaching activities for blind students: difficulties and alternatives.

    Directory of Open Access Journals (Sweden)

    Eder Pires de Camargo

    2006-12-01

    Full Text Available We report here partial outcomes of a study aimed to verify future High School teachers performance when, during the development of a called “TeachingPractice” undergraduate course, were asked to plan Mechanics and Modern Physics topics to a students class which included visual handicapped pupils. Data analyzed show that the main difficulties presented by the future Physics High School teachers are related to the approach to know physics phenomena as dependent of vision. By other hand, as alternatives, future teachers showed creativity in order to surpass passive aptitudes related to this educational problem and working out methodological strategies deprived of the relation knowing/seeing.

  12. Functional neuroanatomy of intuitive physical inference.

    Science.gov (United States)

    Fischer, Jason; Mikhael, John G; Tenenbaum, Joshua B; Kanwisher, Nancy

    2016-08-23

    To engage with the world-to understand the scene in front of us, plan actions, and predict what will happen next-we must have an intuitive grasp of the world's physical structure and dynamics. How do the objects in front of us rest on and support each other, how much force would be required to move them, and how will they behave when they fall, roll, or collide? Despite the centrality of physical inferences in daily life, little is known about the brain mechanisms recruited to interpret the physical structure of a scene and predict how physical events will unfold. Here, in a series of fMRI experiments, we identified a set of cortical regions that are selectively engaged when people watch and predict the unfolding of physical events-a "physics engine" in the brain. These brain regions are selective to physical inferences relative to nonphysical but otherwise highly similar scenes and tasks. However, these regions are not exclusively engaged in physical inferences per se or, indeed, even in scene understanding; they overlap with the domain-general "multiple demand" system, especially the parts of that system involved in action planning and tool use, pointing to a close relationship between the cognitive and neural mechanisms involved in parsing the physical content of a scene and preparing an appropriate action.

  13. RNA sequencing of Populus x canadensis roots identifies key molecular mechanisms underlying physiological adaption to excess zinc.

    Directory of Open Access Journals (Sweden)

    Andrea Ariani

    Full Text Available Populus x canadensis clone I-214 exhibits a general indicator phenotype in response to excess Zn, and a higher metal uptake in roots than in shoots with a reduced translocation to aerial parts under hydroponic conditions. This physiological adaptation seems mainly regulated by roots, although the molecular mechanisms that underlie these processes are still poorly understood. Here, differential expression analysis using RNA-sequencing technology was used to identify the molecular mechanisms involved in the response to excess Zn in root. In order to maximize specificity of detection of differentially expressed (DE genes, we consider the intersection of genes identified by three distinct statistical approaches (61 up- and 19 down-regulated and validate them by RT-qPCR, yielding an agreement of 93% between the two experimental techniques. Gene Ontology (GO terms related to oxidation-reduction processes, transport and cellular iron ion homeostasis were enriched among DE genes, highlighting the importance of metal homeostasis in adaptation to excess Zn by P. x canadensis clone I-214. We identified the up-regulation of two Populus metal transporters (ZIP2 and NRAMP1 probably involved in metal uptake, and the down-regulation of a NAS4 gene involved in metal translocation. We identified also four Fe-homeostasis transcription factors (two bHLH38 genes, FIT and BTS that were differentially expressed, probably for reducing Zn-induced Fe-deficiency. In particular, we suggest that the down-regulation of FIT transcription factor could be a mechanism to cope with Zn-induced Fe-deficiency in Populus. These results provide insight into the molecular mechanisms involved in adaption to excess Zn in Populus spp., but could also constitute a starting point for the identification and characterization of molecular markers or biotechnological targets for possible improvement of phytoremediation performances of poplar trees.

  14. A study on pre-service physics teachers' conceptualization on elementary quantum mechanics

    Directory of Open Access Journals (Sweden)

    Glauco Cohen Ferreira Pantoja

    2017-08-01

    Full Text Available In this work, we present the results of a research in which we aimed to evidence obstacles and advances in pre-service teachers’ conceptualization on a subject involving elementary Quantum Mechanics. We based our analysis on the theories due to David Ausubel and Gèrard Vergnaud to study Meaningful Learning patterns, both in predicative and operatory form of knowledge, of six students involved in a didactical intervention composed of six classes, in which we emphasized both similarities and differences between Classical and Quantum Physics. With this intervention, we intended to teach the concepts of Physical System, Dynamical Variables, State of a Physical System and Time Evolution. We guided our data analysis by the methodology of content analysis (Bardin, 2008 and it turned possible to map Meaningful Learning patterns involving the four concepts to which were associated a set of essential features (in the predicative stage and a set of theorems-in-action (in the operatory stage relating the aim-concepts in problem-solving or conceptual mapping.

  15. Signal of Acceleration and Physical Mechanism of Water Cycle in Xinjiang, China

    OpenAIRE

    Feng, Guo-Lin; Wu, Yong-Ping

    2016-01-01

    Global warming accelerates water cycle with features of regional difference. However, little is known about the physical mechanism behind the phenomenon. To reveal the links between water cycle and climatic environment, we analyzed the changes of water cycle elements and their relationships with climatic and environmental factors. We found that when global warming was significant during the period of 1986-2003, the precipitation in Tarim mountains as well as Xinjiang increased rapidly except ...

  16. Rapid, computer vision-enabled murine screening system identifies neuropharmacological potential of two new mechanisms

    Directory of Open Access Journals (Sweden)

    Steven L Roberds

    2011-09-01

    Full Text Available The lack of predictive in vitro models for behavioral phenotypes impedes rapid advancement in neuropharmacology and psychopharmacology. In vivo behavioral assays are more predictive of activity in human disorders, but such assays are often highly resource-intensive. Here we describe the successful application of a computer vision-enabled system to identify potential neuropharmacological activity of two new mechanisms. The analytical system was trained using multiple drugs that are used clinically to treat depression, schizophrenia, anxiety, and other psychiatric or behavioral disorders. During blinded testing the PDE10 inhibitor TP-10 produced a signature of activity suggesting potential antipsychotic activity. This finding is consistent with TP-10’s activity in multiple rodent models that is similar to that of clinically used antipsychotic drugs. The CK1ε inhibitor PF-670462 produced a signature consistent with anxiolytic activity and, at the highest dose tested, behavioral effects similar to that of opiate analgesics. Neither TP-10 nor PF-670462 was included in the training set. Thus, computer vision-based behavioral analysis can facilitate drug discovery by identifying neuropharmacological effects of compounds acting through new mechanisms.

  17. Physical and mechanical properties of biobased materials - Starch polylactate and polyhydroxybutyrate

    DEFF Research Database (Denmark)

    Bergenholtz, Karina P.; Nielsen, Per Væggemose; Olsen, M.B.

    2001-01-01

    Commercial and semi-commercial biobased materials (Polylactate, PLA, polyhydroxybutyrate, PHB, wheat starch and corn starch) were investigated. Physical and mechanical characterisation (tensile strength, elongation, tear strength, compression, gas permeability (CO2 and O-2) and water vapour...... permeability (WVP)) was examined. Tests on both films and cups show potential use of these materials for primary food packaging, especially PLA and PHB. An interesting O-2:CO2 permeability ratio (1:7 to 1:12) was seen, which make these materials suitable for packaging of food with high respiration...

  18. Physical, mechanical, and biodegradable properties of meranti wood polymer composites

    International Nuclear Information System (INIS)

    Enamul Hoque, M.; Aminudin, M.A.M.; Jawaid, M.; Islam, M.S.; Saba, N.; Paridah, M.T.

    2014-01-01

    Highlights: • In-situ polymerization and solution casting method used to manufacture WPC. • In-situ WPC exhibited better properties compared to pure wood, 5% WPC and 20% WPC. • Lowest water absorption and least biodegradability shown by In-situ wood. - Abstract: In-situ polymerization and solution casting techniques are two effective methods to manufacture wood polymer composites (WPCs). In this study, wood polymer composites (WPCs) were manufactured from meranti sapwood by solution casting and in-situ polymerization process using methyl methacrylate (MMA) and epoxy matrix respectively. Physical, mechanical, and morphological characterizations of fabricated WPCs were then carried out to analyse their properties. Morphological properties of composites samples were analyzed through scanning electron microscopy (SEM). The result reveals that in-situ wood composite exhibited better properties compared to pure wood, 5% WPC and 20% WPC. Moreover, in-situ WPC had lowest water absorption and least biodegraded. Conversely, pure wood shown moderate mechanical strength, high biodegradation and water absorption rate. In term of biodegradation, earth-medium brought more severe effect than water in deteriorating the properties of the specimens

  19. Foundations of quantum mechanics an exploration of the physical meaning of quantum theory

    CERN Document Server

    Norsen, Travis

    2017-01-01

    Authored by an acclaimed teacher of quantum physics and philosophy, this textbook pays special attention to the aspects that many courses sweep under the carpet. Traditional courses in quantum mechanics teach students how to use the quantum formalism to make calculations. But even the best students - indeed, especially the best students - emerge rather confused about what, exactly, the theory says is going on, physically, in microscopic systems. This supplementary textbook is designed to help such students understand that they are not alone in their confusions (luminaries such as Albert Einstein, Erwin Schroedinger, and John Stewart Bell having shared them), to sharpen their understanding of the most important difficulties associated with interpreting quantum theory in a realistic manner, and to introduce them to the most promising attempts to formulate the theory in a way that is physically clear and coherent. The text is acces sible to students with at least one semester of prior exposure to quantum (or...

  20. Spinorial space-time and the origin of Quantum Mechanics. The dynamical role of the physical vacuum

    International Nuclear Information System (INIS)

    Gonzalez-Mestres, Luis

    2016-01-01

    Is Quantum Mechanics really and ultimate principle of Physics described by a set of intrinsic exact laws? Are standard particles the ultimate constituents of matter? The two questions appear to be closely related, as a preonic structure of the physical vacuum would have an influence on the properties of quantum particles. Although the first preon models were just « quark-like » and assumed preons to be direct constituents of the conventional « elementary » particles, we suggested in 1995 that preons could instead be constituents of the physical vacuum (the superbradyon hypothesis). Standard particles would then be excitations of the preonic vacuum and have substantially different properties from those of preons themselves (critical speed…). The standard laws of Particle Physics would be approximate expressions generated from basic preon dynamics. In parallel, the mathematical properties of space-time structures such as the spinoral space-time (SST) we introduced in 1996-97 can have strong implications for Quantum Mechanics and even be its real origin. We complete here our recent discussion of the subject by pointing out that: i) Quantum Mechanics corresponds to a natural set of properties of vacuum excitations in the presence of a SST geometry ; ii) the recently observed entanglement at long distances would be a logical property if preons are superluminal (superbradyons), so that superluminal signals and correlations can propagate in vacuum ; iii) in a specific description, the function of space-time associated to the extended internal structure of a spin-1/2 particle at very small distances may be incompatible with a continuous motion at space and time scales where the internal structure of vacuum can be felt. In the dynamics associated to iii), and using the SST approach to space-time, a contradiction can appear between macroscopic and microscopic space-times due to an overlap in the time variable directly related to the fact that a spinorial function takes

  1. Extraction of cellulose from pistachio shell and physical and mechanical characterisation of cellulose-based nanocomposites

    Science.gov (United States)

    Movva, Mounika; Kommineni, Ravindra

    2017-04-01

    Cellulose is an important nanoentity that have been used for the preparation of composites. The present work focuses on the extraction of cellulose from pistachio shell and preparing a partially degradable nanocomposite with extracted cellulose. Physical and microstructural characteristics of nanocellulose extracted from pistachio shell powder (PSP) through various stages of chemical treatment are identified from scanning electron microscopy (SEM), Fourier transform infra-red spectroscopy (FTIR), x-ray powder diffraction (XRD), and thermogravimetric analysis (TGA). Later, characterized nanocellulose is reinforced in a polyester matrix to fabricate nanocellulose-based composites according to the ASTM standard. The resulting nanocellulose composite performance is evaluated in the mechanical perspective through tensile and flexural loading. SEM, FTIR, and XRD showed that the process for extraction is efficient in obtaining 95% crystalline cellulose. Cellulose also showed good thermal stability with a peak thermal degradation temperature of 361 °C. Such cellulose when reinforced in a matrix material showed a noteworthy rise in tensile and flexural strengths of 43 MPa and 127 MPa, at a definite weight percent of 5%.

  2. Using High Speed Smartphone Cameras and Video Analysis Techniques to Teach Mechanical Wave Physics

    Science.gov (United States)

    Bonato, Jacopo; Gratton, Luigi M.; Onorato, Pasquale; Oss, Stefano

    2017-01-01

    We propose the use of smartphone-based slow-motion video analysis techniques as a valuable tool for investigating physics concepts ruling mechanical wave propagation. The simple experimental activities presented here, suitable for both high school and undergraduate students, allows one to measure, in a simple yet rigorous way, the speed of pulses…

  3. Classical mechanics

    CERN Document Server

    Benacquista, Matthew J

    2018-01-01

    This textbook provides an introduction to classical mechanics at a level intermediate between the typical undergraduate and advanced graduate level. This text describes the background and tools for use in the fields of modern physics, such as quantum mechanics, astrophysics, particle physics, and relativity. Students who have had basic undergraduate classical mechanics or who have a good understanding of the mathematical methods of physics will benefit from this book.

  4. Theoretical physics vol. 2. Quantum mechanics, relativistic quantum mechanics, quantum field theory, elementar-particle theory, thermodynamics and statistics

    International Nuclear Information System (INIS)

    Rebhan, E.

    2005-01-01

    The present second volume treats quantum mechanics, relativistic quantum mechanics, the foundations of quantum-field and elementary-particle theory as well as thermodynamics and statistics. Both volumes comprehend all fields, which are usually offered in a course about theoretical physics. In all treated fields a very careful introduction to the basic natural laws forms the starting point, whereby it is thoroughly analysed, which of them is based on empirics, which is logically deducible, and which role play basic definitions. Extendingly the matter extend of the corresponding courses starting from the relativistic quantum theory an introduction to the elementary particles is developed. All problems are very thoroughly and such extensively studied, that each step is singularly reproducible. On motivation and good understandability is cared much about. The mixing of mathematical difficulties with problems of physical nature often obstructive in the learning is so circumvented, that important mathematical methods are presented in own chapters (for instance Hilbert spaces, Lie groups). By means of many examples and problems (for a large part with solutions) the matter worked out is deepened and exercised. Developments, which are indeed important, but seem for the first approach abandonable, are pursued in excurses. This book starts from courses, which the author has held at the Heinrich-Heine university in Duesseldorf, and was in many repetitions fitted to the requirements of the students. It is conceived in such a way, that it is also after the study suited as dictionary or for the regeneration

  5. The geometry of higher-order Lagrange spaces applications to mechanics and physics

    CERN Document Server

    Miron, Radu

    1997-01-01

    This monograph is devoted to the problem of the geometrizing of Lagrangians which depend on higher-order accelerations It presents a construction of the geometry of the total space of the bundle of the accelerations of order k>=1 A geometrical study of the notion of the higher-order Lagrange space is conducted, and the old problem of prolongation of Riemannian spaces to k-osculator manifolds is solved Also, the geometrical ground for variational calculus on the integral of actions involving higher-order Lagrangians is dealt with Applications to higher-order analytical mechanics and theoretical physics are included as well Audience This volume will be of interest to scientists whose work involves differential geometry, mechanics of particles and systems, calculus of variation and optimal control, optimization, optics, electromagnetic theory, and biology

  6. Spatial Dependence of Physical Attributes and Mechanical Properties of Ultisol in a Sugarcane Field.

    Science.gov (United States)

    Tavares, Uilka Elisa; Rolim, Mário Monteiro; de Oliveira, Veronildo Souza; Pedrosa, Elvira Maria Regis; Siqueira, Glécio Machado; Magalhães, Adriana Guedes

    2015-01-01

    This study investigates the effect of conventional tillage and application of the monoculture of sugar cane on soil health. Variables like density, moisture, texture, consistency limits, and preconsolidation stress were taken as indicators of soil quality. The measurements were made at a 120 × 120 m field cropped with sugar cane under conventional tillage. The objective of this work was to characterize the soil and to study the spatial dependence of the physical and mechanical attributes. Then, undisturbed soil samples were collected to measure bulk density, moisture content and preconsolidation stress and disturbed soil samples for classification of soil texture, and consistency limits. The soil texture indicated that soil can be characterized as sandy clay soil and a sandy clay loam soil, and the consistency limits indicated that the soil presents an inorganic low plasticity clay. The preconsolidation tests tillage in soil moisture content around 19% should be avoided or should be chosen a management of soil with lighter vehicles in this moisture content, to avoid risk of compaction. Using geostatistical techniques mapping was possible to identify areas of greatest conservation soil and greater disturbance of the ground.

  7. A physical mechanism producing suprathermal populations and initiating substorms in the Earth's magnetotail

    Directory of Open Access Journals (Sweden)

    D. V. Sarafopoulos

    2008-06-01

    Full Text Available We suggest a candidate physical mechanism, combining there dimensional structure and temporal development, which is potentially able to produce suprathermal populations and cross-tail current disruptions in the Earth's plasma sheet. At the core of the proposed process is the "akis" structure; in a thin current sheet (TCS the stretched (tail-like magnetic field lines locally terminate into a sharp tip around the tail midplane. At this sharp tip of the TCS, ions become non-adiabatic, while a percentage of electrons are accumulated and trapped: The strong and transient electrostatic electric fields established along the magnetic field lines produce suprathermal populations. In parallel, the tip structure is associated with field aligned and mutually attracted parallel filamentary currents which progressively become more intense and inevitably the structure collapses, and so does the local TCS. The mechanism is observationally based on elementary, almost autonomous and spatiotemporal entities that correspond each to a local thinning/dipolarization pair having duration of ~1 min. Energetic proton and electron populations do not occur simultaneously, and we infer that they are separately accelerated at local thinnings and dipolarizations, respectively. In one example energetic particles are accelerated without any dB/dt variation and before the substorm expansion phase onset. A particular effort is undertaken demonstrating that the proposed acceleration mechanism may explain the plasma sheet ratio Ti/Te≈7. All our inferences are checked by the highest resolution datasets obtained by the Geotail Energetic Particles and Ion Composition (EPIC instrument. The energetic particles are used as the best diagnostics for the accelerating source. Near Earth (X≈10 RE selected events support our basic concept. The proposed mechanism seems to reveal a fundamental building block of the substorm phenomenon and may be the basic process/structure, which is now

  8. Irreversible Aspects of Continuum Mechanics and Transfer of Physical Characteristics in Moving Fluids : Symposia

    CERN Document Server

    Sedov, L

    1968-01-01

    At its meeting on April 23, 1965 in Paris the Bureau of IUTAM decided to have a Symposium on the Irreversible Aspects of Continaum Mechanics held in June 1966 in Vienna. In addition, a Symposium on the Transfer of Physical Characteristics in Moving Fluids which, orig­ inally, had been scheduled to take place in Stockholm was rescheduled to be held in Vienna immediately following the Symposium on the Irre­ versible Aspects of Continuum Mechanics. It was felt that the subjects of the two symposia were so closely related that participants should be given an opportunity to attend both. Both decisions were unanimously approved by the members of the General Assembly of IUTAM. Prof. H. PARKUS, Vienna, was appointed Chairman of the Symposium on the Irreversible Aspects, and Prof. L. I. SEDOV, Moscow, was appointed Chairman of the Symposium on the Transfer of Physical Characteristics, with Prof. P ARKUS being re­ sponsible for the local organization of both symposia. In accordance with the policy set forth by IUTAM...

  9. Effects of fire retardants on physical, mechanical, and fire properties of flat-pressed WPCs

    Science.gov (United States)

    Nadir Ayrilmis; Jan T. Benthien; Heiko Thoemen; Robert H. White

    2012-01-01

    Physical, mechanical, and fire properties of the flat-pressed wood plastic composites (WPCs) incorporated with various fire retardants (10% by weight) at different levels of wood flour (WF) content, 40, 50, or 60 wt%, were investigated. The WPC panels were made from dry-blended WF, polypropylene (PP), and fire retardant (FR) powders with maleic anhydride-grafted PP (2...

  10. Identifying parents' perceptions about physical activity: a qualitative exploration of salient behavioural, normative and control beliefs among mothers and fathers of young children.

    Science.gov (United States)

    Hamilton, Kyra; White, Katherine M

    2010-11-01

    Drawing on the belief-based framework of the Theory of Planned Behaviour, this study employs qualitative methodology involving individual and group interviews to examine the beliefs associated with regular physical activity performance among parents of young children (N = 40). The data were analysed using thematic content analysis. A range of advantages (e.g. improves parenting practices), disadvantages (e.g. interferes with commitments), barriers (e.g. time), and facilitators (e.g. social support) to performing physical activity are identified. Normative pressures are also identified as affecting parents' activity behaviour. These identified beliefs can be used to inform interventions to challenge inactivity among this at-risk group.

  11. Effect of nanoclay particles on some physical and mechanical properties of soils

    Directory of Open Access Journals (Sweden)

    H Sharifnasab

    2016-04-01

    Full Text Available Introduction: As a mechanical tillage practices on soil preparation improve soil structure, increase in porosity, better distribution of soil aggregates and eventually modify the physical properties of soil. The use of nano-technology in agricultural science and its application in tillage for improving the physical properties and mechanical issues has grown substantially. Nanotechnology is an appropriate way to reduce soil limitations. However the nanoparticles are very small amounts in soil, due to features such as high surface area, surface charge (appearance and sometimes porous nano-engineering of physical-chemical properties of soil are affected significantly (Mohammadi & Niazian, 2013. To use of nanomaterials in the territory of a new issue (Taipodia et al., 2011. Small developments on the use of nanoparticles to improve soil quality and land reform have been taken (Theron et al., 2008. Clay soil was used to enhance the compressive strength (Yonekura & Miwa, 1993. Nanosilica particle effects were examined for increasing resistance against penetration and consolidation (Noll et al., 1992. In 2005, these particles were used to increase adhesion and reduce viscosity. It seemed that the adhesion of the particles was depended on Nanosilica (Mohammadi & Niazian, 2013. The use of nanomaterials showed that the increased pH and soil fertility, improved soil physical structure, and reduced mobility, availability and toxicity of heavy metals and other environmental factors and those that will stabilize the soil components and subsides the erosion in the mining pick, (Lal, 2008. In agriculture, the soil conditioner studies have shown that nanoparticles can mine the soil quality by increasing water-holding capacity, increasing silt and clay and improve levels of nutrients, and eliminate toxins, (Liu and Lal, 2012.In this study, the effect on some physical and mechanical properties of soil contain clay gradation, Atterberg limits, specifications

  12. Visualization of the Invisible: The Qubit as Key to Quantum Physics

    Science.gov (United States)

    Dür, Wolfgang; Heusler, Stefan

    2014-01-01

    Quantum mechanics is one of the pillars of modern physics, however rather difficult to teach at the introductory level due to the conceptual difficulties and the required advanced mathematics. Nevertheless, attempts to identify relevant features of quantum mechanics and to put forward concepts of how to teach it have been proposed. Here we present…

  13. Physical mechanisms of copper-copper wafer bonding

    International Nuclear Information System (INIS)

    Rebhan, B.; Hingerl, K.

    2015-01-01

    The study of the physical mechanisms driving Cu-Cu wafer bonding allowed for reducing the bonding temperatures below 200 °C. Metal thermo-compression Cu-Cu wafer bonding results obtained at such low temperatures are very encouraging and suggest that the process is possible even at room temperature if some boundary conditions are fulfilled. Sputtered (PVD) and electroplated Cu thin layers were investigated, and the analysis of both metallization techniques demonstrated the importance of decreasing Cu surface roughness. For an equal surface roughness, the bonding temperature of PVD Cu wafers could be even further reduced due to the favorable microstructure. Their smaller grain size enhances the length of the grain boundaries (observed on the surface prior bonding), acting as efficient mass transfer channels across the interface, and hence the grains are able to grow over the initial bonding interface. Due to the higher concentration of random high-angle grain boundaries, this effect is intensified. The model presented is explaining the microstructural changes based on atomic migration, taking into account that the reduction of the grain boundary area is the major driving force to reduce the Gibbs free energy, and predicts the subsequent microstructure evolution (grain growth) during thermal annealing

  14. Physical-mechanical and anatomical characterization in 26-year-old Eucalyptus resinifera wood

    OpenAIRE

    Lima,Israel Luiz de; Longui,Eduardo Luiz; Freitas,Miguel Luiz Menezes; Zanatto,Antonio Carlos Scatena; Zanata,Marcelo; Florsheim,Sandra Monteiro Borges; Bortoletto Jr.,Geraldo

    2014-01-01

    In the present study, we aimed to characterize Eucalyptus resinifera wood through physical and mechanical assays and wood anatomy studies, as well as determine the relationships between the properties and anatomy of wood. We used samples collected from the area close to the bark of ten 26-year-old E. resinifera trees. We concluded that the specific gravity (Gb), compression (f c0), and shear parallel to grain (f v0) were ranked in strength classes C30, C40 and C60, respectively, and that volu...

  15. Effect of temperature on physical and mechanical properties of concrete containing silica fume

    International Nuclear Information System (INIS)

    Saad, M.; Hanna, G.B.; Abo-El-Enein, S.A.; Kotkata, M.F.

    1996-01-01

    Heat-resistant materials are usually used for structural purposes. The need for such building materials is particularly important in the chemical and metallurgical industries and for the thermal shieldings of nuclear power plants. Thus the effect of high temperatures on physical and mechanical properties of concrete was investigated. In this study ordinary Portland cement has been partially replaced by ratios of silica fume. The heat treatment temperature varied from 100 to 600 C by increments of 100 C for three hours without any load. Concrete specimens were treated at each temperature level. The specimens were heated under the same condition for each temperature level. Comparison between physical and mechanical properties during heat treatment were investigated. All specimens were moist-cured for 28 days after casting. Tests were carried out on specimens cooled slowly to room temperature after heating. Results of this investigation indicated that the replacement of ordinary Portland cement by 10% silica fume by weight improved the compressive strength by about 64.6%, but replacement of ordinary Portland cement by silica fume by ratios 20 and 30% improved the compressive strength by only 28% at 600 C. This could be attributed to the additional tobermorite gel (CSH phase) which formed due to the reaction of silica fume with Ca(OH) 2

  16. The validity of generic trends on multiple scales in rock-physical and rock-mechanical properties of the Whitby Mudstone, United Kingdom

    NARCIS (Netherlands)

    Douma, L.A.N.R.; Primarini, M.I.W.; Houben, M.E.; Barnhoorn, A.

    Finding generic trends in mechanical and physical rock properties will help to make predictions of the rock-mechanical behaviour of shales. Understanding the rock-mechanical behaviour of shales is important for the successful development of unconventional hydrocarbon reservoirs. This paper presents

  17. Influences of mechanical exposure biographies on physical capabilities of workers from automotive industry - a study on possible dose-response relationships and consequences for short and long term job rotation.

    Science.gov (United States)

    Rademacher, Holger; Bruder, Ralph; Sinn-Behrendt, Andrea; Landau, Kurt

    2012-01-01

    This paper describes a field study in production areas of a vehicle manufacturing plant, where 106 male workers (aged from 20 to 63 years) were examined and interviewed by the authors. Aim of study was to identify relationships between specific physical worker capabilities and doses of mechanical exposures using self-developed standardized questionnaires as well as a battery of work-specific tests. The dependent variables are different "physical capabilities", classified using a five-point rating scale with regard to the grade of limitation of the respective capability. Independent variables are "age" and specific "mechanical exposures". Several exposures were combined and multiplied with their respective durations in order to determine doses on three different body regions - back, shoulder-neck and upper limbs. There are significant positive correlations between "age" and "dose of mechanical exposure on back/shoulder-neck/upper limbs region". The analysis of the relationship between dose of exposure and different capabilities to lift or reposition loads (with variable weight) shows weak significant correlations for all three body regions. Data analysis shows no significant correlations between any dose of mechanical exposure and capabilities to work in awkward body postures.These results should be considered in age management programs when scheduling future employee assignments to workplaces, especially for production systems where manual handling tasks are dominant.

  18. On the physical nonexistence of signals going backwards in time, and quantum mechanics

    International Nuclear Information System (INIS)

    Garuccio, A.; Maccarrone, G.D.

    1980-01-01

    With regard to the recent results of new experiments about the EPR-paradox, which seem to disagree with Bell inequality and appear to confirm quantum mechanics, some theoretical interpretations have been proposed. In this letter, it is shown that the interpretations invoking transmission of signals into the past do not seem to be physically acceptable. The positive role of the ''Reinterpretation Principle'' (for an orthodox reinterpretation of the ''advanced solutions'') is in particular stressed. (author)

  19. Postharvest Chemical, Sensorial and Physical-Mechanical Properties of Wild Apricot (Prunus armeniaca L.)

    OpenAIRE

    Evica MRATINIĆ; Bojan POPOVSKI; Tomo MILOŠEVIĆ; Melpomena POPOVSKA

    2011-01-01

    Some chemical, sensorial and physical-mechanical properties of 19 apricot genotypes and Hungarian Best (control) such as moisture content, soluble solids content, titratable acidity ratio and their ratio, fruit and stone mass, flesh/stone ratio, fruit dimensions (length, width, thickness), arithmetic and geometric mean diameter, sphericity, surface area and aspect ratio were determined. Their application is also discussed. The highest moisture content and stone mass observed in X-1/1/04 and X...

  20. A Physical Mechanism and Global Quantification of Breast Cancer.

    Directory of Open Access Journals (Sweden)

    Chong Yu

    Full Text Available Initiation and progression of cancer depend on many factors. Those on the genetic level are often considered crucial. To gain insight into the physical mechanisms of breast cancer, we construct a gene regulatory network (GRN which reflects both genetic and environmental aspects of breast cancer. The construction of the GRN is based on available experimental data. Three basins of attraction, representing the normal, premalignant and cancer states respectively, were found on the phenotypic landscape. The progression of breast cancer can be seen as switching transitions between different state basins. We quantified the stabilities and kinetic paths of the three state basins to uncover the biological process of breast cancer formation. The gene expression levels at each state were obtained, which can be tested directly in experiments. Furthermore, by performing global sensitivity analysis on the landscape topography, six key genes (HER2, MDM2, TP53, BRCA1, ATM, CDK2 and four regulations (HER2⊣TP53, CDK2⊣BRCA1, ATM→MDM2, TP53→ATM were identified as being critical for breast cancer. Interestingly, HER2 and MDM2 are the most popular targets for treating breast cancer. BRCA1 and TP53 are the most important oncogene of breast cancer and tumor suppressor gene, respectively. This further validates the feasibility of our model and the reliability of our prediction results. The regulation ATM→MDM2 has been extensive studied on DNA damage but not on breast cancer. We notice the importance of ATM→MDM2 on breast cancer. Previous studies of breast cancer have often focused on individual genes and the anti-cancer drugs are mainly used to target the individual genes. Our results show that the network-based strategy is more effective on treating breast cancer. The landscape approach serves as a new strategy for analyzing breast cancer on both the genetic and epigenetic levels and can help on designing network based medicine for breast cancer.

  1. Physical Therapy in the Treatment of Central Pain Mechanisms for Female Sexual Pain.

    Science.gov (United States)

    Vandyken, Carolyn; Hilton, Sandra

    2017-01-01

    The complexity of female sexual pain requires an interdisciplinary approach. Physical therapists trained in pelvic health conditions are well positioned to be active members of an interdisciplinary team addressing the assessment and treatment of female sexual pain. Changes within physical therapy practice in the last ten years have resulted in significant utilization of pelvic floor muscle relaxation and manual therapy techniques to address a variety of pelvic pain conditions, including female sexual pain. However, sexual pain is a complex issue giving credence to the necessity of addressing all of the drivers of the pain experience- biological, psychological and social. This review aims to reconcile current pain science with a plan for integrating a biopsychosocial approach into the evaluation and subsequent treatment for female sexual pain for physical therapists. A literature review of the important components of skilled physical therapy interventions is presented including the physical examination, pain biology education, cognitive behavioral influences in treatment design, motivational interviewing as an adjunct to empathetic practice, and the integration of non-threatening movement and mindfulness into treatment. A single case study is used to demonstrate the biopsychosocial framework utilized in this approach. Appropriate measures for assessing psychosocial factors are readily available and inform a reasoned approach for physical therapy design that addresses both peripheral and central pain mechanisms. Decades of research support the integration of a biopsychosocial approach in the treatment of complex pain, including female sexual pain. It is reasonable for physical therapists to utilize evidence based strategies such as CBT, pain biology education, Mindfulness Based Stress Reduction (MBSR), yoga and imagery based exercises to address the biopsychosocial components of female sexual pain. Copyright © 2016 International Society for Sexual Medicine

  2. Identifying the nonlinear mechanical behaviour of micro-speakers from their quasi-linear electrical response

    Science.gov (United States)

    Zilletti, Michele; Marker, Arthur; Elliott, Stephen John; Holland, Keith

    2017-05-01

    In this study model identification of the nonlinear dynamics of a micro-speaker is carried out by purely electrical measurements, avoiding any explicit vibration measurements. It is shown that a dynamic model of the micro-speaker, which takes into account the nonlinear damping characteristic of the device, can be identified by measuring the response between the voltage input and the current flowing into the coil. An analytical formulation of the quasi-linear model of the micro-speaker is first derived and an optimisation method is then used to identify a polynomial function which describes the mechanical damping behaviour of the micro-speaker. The analytical results of the quasi-linear model are compared with numerical results. This study potentially opens up the possibility of efficiently implementing nonlinear echo cancellers.

  3. Physical Principles Pertaining to Ultrasonic and Mechanical Properties of Anisotropic Media and Their Application to Nondestructive Evaluation of Fiber-Reinforced Composite Materials

    Science.gov (United States)

    Handley, Scott Michael

    The central theme of this thesis is to contribute to the physics underlying the mechanical properties of highly anisotropic materials. Our hypothesis is that a fundamental understanding of the physics involved in the interaction of interrogating ultrasonic waves with anisotropic media will provide useful information applicable to quantitative ultrasonic measurement techniques employed for the determination of material properties. Fiber-reinforced plastics represent a class of advanced composite materials that exhibit substantial anisotropy. The desired characteristics of practical fiber -reinforced composites depend on average mechanical properties achieved by placing fibers at specific angles relative to the external surfaces of the finished part. We examine the physics underlying the use of ultrasound as an interrogation probe for determination of ultrasonic and mechanical properties of anisotropic materials such as fiber-reinforced composites. Fundamental constituent parameters, such as elastic stiffness coefficients (c_{rm IJ}), are experimentally determined from ultrasonic time-of-flight measurements. Mechanical moduli (Poisson's ratio, Young's and shear modulus) descriptive of the anisotropic mechanical properties of unidirectional graphite/epoxy composites are obtained from the ultrasonically determined stiffness coefficients. Three-dimensional visualizations of the anisotropic ultrasonic and mechanical properties of unidirectional graphite/epoxy composites are generated. A related goal of the research is to strengthen the connection-between practical ultrasonic nondestructive evaluation methods and the physics underlying quantitative ultrasonic measurements for the assessment of manufactured fiber-reinforced composites. Production defects such as porosity have proven to be of substantial concern in the manufacturing of composites. We investigate the applicability of ultrasonic interrogation techniques for the detection and characterization of porosity in

  4. Deviant Peer Affiliation as an Explanatory Mechanism in the Association between Corporal Punishment and Physical Aggression: a Longitudinal Study among Chinese Adolescents.

    Science.gov (United States)

    Zhu, Jianjun; Yu, Chengfu; Bao, Zhenzhou; Jiang, Yanping; Zhang, Wei; Chen, Yuanyuan; Qiu, Boyu; Zhang, Jianjun

    2017-11-01

    Previous research has focused primarily on corporal punishment as a cause and adolescents' physical aggression as an outcome. However, there is a large gap in knowledge of the potentially bidirectional association and explanatory mechanism underlying the association between corporal punishment and physical aggression. The current study, using a longitudinal design across three time points (the fall semester of 7th grade, the fall of 8th grade, and the fall of 9th grade), aimed to a) examine the reciprocal processes between corporal punishment and physical aggression, and b) explore whether deviant peer affiliation may explain such reciprocal connections. Only adolescents participating in all the three time points were included in this study, resulting in a final sample of 342 adolescents (175 boys, 167 girls) who completed questionnaires regarding corporal punishment, deviant peer affiliation, and aggression. Gender, age and socioeconomic status were controlled for in the analyses. Autoregressive cross-lagged models showed that the results did not support the direct reciprocal effect between corporal punishment and physical aggression among Chinese adolescents. A direct longitudinal link from corporal punishment to physical aggression was found, however, the inverse association was not significant. Moreover, regarding the longitudinal underlying process, in one direction, corporal punishment at 7th grade predicted higher levels of deviant peer affiliation at 8th grade. In turn, higher deviant peer affiliation at 8th grade predicted increased physical aggression at 9th grade. At the same time, in the other direction, adolescent physical aggression at 7th grade significantly predicted deviant peer affiliation at 8th grade. In turn, higher deviant peer affiliation at 8th grade predicted decreased corporal punishment at 9th grade. Identifying the direct and underlying reciprocal processes between corporal punishment and adolescent physical aggression has important

  5. Quantum mechanics

    CERN Document Server

    Rae, Alastair I M

    2016-01-01

    A Thorough Update of One of the Most Highly Regarded Textbooks on Quantum Mechanics Continuing to offer an exceptionally clear, up-to-date treatment of the subject, Quantum Mechanics, Sixth Edition explains the concepts of quantum mechanics for undergraduate students in physics and related disciplines and provides the foundation necessary for other specialized courses. This sixth edition builds on its highly praised predecessors to make the text even more accessible to a wider audience. It is now divided into five parts that separately cover broad topics suitable for any general course on quantum mechanics. New to the Sixth Edition * Three chapters that review prerequisite physics and mathematics, laying out the notation, formalism, and physical basis necessary for the rest of the book * Short descriptions of numerous applications relevant to the physics discussed, giving students a brief look at what quantum mechanics has made possible industrially and scientifically * Additional end-of-chapter problems with...

  6. Near Identifiability of Dynamical Systems

    Science.gov (United States)

    Hadaegh, F. Y.; Bekey, G. A.

    1987-01-01

    Concepts regarding approximate mathematical models treated rigorously. Paper presents new results in analysis of structural identifiability, equivalence, and near equivalence between mathematical models and physical processes they represent. Helps establish rigorous mathematical basis for concepts related to structural identifiability and equivalence revealing fundamental requirements, tacit assumptions, and sources of error. "Structural identifiability," as used by workers in this field, loosely translates as meaning ability to specify unique mathematical model and set of model parameters that accurately predict behavior of corresponding physical system.

  7. On the physical mechanisms governing self-excited pressure surge in Francis turbines

    International Nuclear Information System (INIS)

    Müller, A; Favrel, A; Landry, C; Yamamoto, K; Avellan, F

    2014-01-01

    The required operating range for hydraulic machines is continually extended in an effort to integrate renewable energy sources with unsteady power outputs into the existing electrical grid. The off-design operation however brings forth unfavorable flow patterns in the machine, causing dynamic problems involving cavitation, which may represent a limiting factor to the energy production. In Francis turbines it is observed that the self-excited oscillation of a vortex rope in the draft tube cone prevents the delivery of maximum power when required. This phenomenon is referred to as full load pressure surge and has been the object of extensive research during the past decades. Several contributions deepened its understanding through measurement and simulation of the local flow properties and the global stability parameters. The draft tube pressure level and the runner outlet swirl are identified as key variables in the modelling of the vortex rope dynamics. Recently, a cyclic appearance of blade cavitation has been observed at overload conditions in a multiphase numerical simulation coupling the runner and the draft tube. From the analysis of the simulation it becomes obvious that the cyclic appearance of blade cavitation has a direct effect on the runner outlet swirl, thus introducing an additional interaction mechanism that is not accounted for in formerly published models. For the presented work, the results of this numerical study are confirmed experimentally on a reduced scale model of a Francis turbine. Several wall pressure measurements in the draft tube cone are performed, together with high speed visualizations of the vortex rope and the blade cavitation. The flow swirl is calculated based on Laser Doppler Velocimetry measurements. A possible mechanism explaining the coupling between the self-excited pressure and vortex rope oscillation and the cyclic appearance of the blade cavitation is proposed. Furthermore, the streamwise propagation speed of the flow

  8. Propagation of SH waves in a piezoelectric/piezomagnetic plate: Effects of interfacial imperfection couplings and the related physical mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    Wei, Hong-Xing [Beijing Advanced Innovation Center for Imaging Technology, Capital Normal University, Beijing 100048 (China); Li, Yong-Dong, E-mail: LYDbeijing@163.com [Beijing Advanced Innovation Center for Imaging Technology, Capital Normal University, Beijing 100048 (China); Department of Mechanical Engineering, Academy of Armored Force Engineering, Beijing 100072 (China); Xiong, Tao [Department of Mechanical Engineering, Academy of Armored Force Engineering, Beijing 100072 (China); Guan, Yong [Beijing Advanced Innovation Center for Imaging Technology, Capital Normal University, Beijing 100048 (China)

    2016-09-07

    The problem of dispersive SH wave in a piezoelectric/piezomagnetic plate that contains an imperfect interface is considered in the present work. An imperfection coupling model is adopted to describe the magnetic, electric and mechanical imperfections on the interface. A transcendental dispersion equation is derived and numerically solved to get the phase velocity. The validity of the numerical procedure is verified in a degenerated case. The effects of the coupled interfacial imperfections on the dispersion behavior of SH waves are discussed in detail and the related underlying physical mechanisms are explained. - Highlights: • SH-wave is investigated in a multiferroic plate with coupled interfacial imperfections. • SH-wave is affected by both interfacial imperfections and their inter-couplings. • Physical mechanisms of the effects are explained via energy transformations.

  9. Propagation of SH waves in a piezoelectric/piezomagnetic plate: Effects of interfacial imperfection couplings and the related physical mechanisms

    International Nuclear Information System (INIS)

    Wei, Hong-Xing; Li, Yong-Dong; Xiong, Tao; Guan, Yong

    2016-01-01

    The problem of dispersive SH wave in a piezoelectric/piezomagnetic plate that contains an imperfect interface is considered in the present work. An imperfection coupling model is adopted to describe the magnetic, electric and mechanical imperfections on the interface. A transcendental dispersion equation is derived and numerically solved to get the phase velocity. The validity of the numerical procedure is verified in a degenerated case. The effects of the coupled interfacial imperfections on the dispersion behavior of SH waves are discussed in detail and the related underlying physical mechanisms are explained. - Highlights: • SH-wave is investigated in a multiferroic plate with coupled interfacial imperfections. • SH-wave is affected by both interfacial imperfections and their inter-couplings. • Physical mechanisms of the effects are explained via energy transformations.

  10. Developing a questionnaire to identify perceived barriers for implementing the Dutch physical therapy COPD clinical practice guideline.

    Science.gov (United States)

    van der Wees, Philip J; Zagers, Cor A M; de Die, Sara E; Hendriks, Erik J M; Nijhuis-van der Sanden, Maria W G; de Bie, Rob A

    2013-05-01

    Clinical practice guidelines have been developed to assist healthcare practitioners in clinical decision making. Publication of clinical practice guidelines does not automatically lead to their uptake and barrier identification has been recognized as an important step in implementation planning. This study aimed at developing a questionnaire to identify perceived barriers for implementing the Dutch COPD guideline for physical therapists and its recommended measurement instruments. An overall questionnaire, based on two existing questionnaires, was constructed to identify barriers and facilitators for implementing the COPD guideline. The construct of the questionnaire was assessed in a cross-sectional study among 246 chest physical therapists. Factor analysis was conducted to explore underlying dimensions. Psychometric properties were analyzed using Cronbach's alpha. Barriers and facilitators were assessed using descriptive statistics. Some 139 physical therapists (57%) responded. Factor analysis revealed 4-factor and 5-factor solutions with an explained variance of 36% and 39% respectively. Cronbach's alpha of the overall questionnaire was 0.90, and varied from 0.66 to 0.92 for the different factors. Underlying domains of the 5-factor solution were characterized as: attitude towards using measurement instruments, knowledge and skills of the physical therapist, applicability of the COPD guideline, required investment of time & money, and patient characteristics. Physical therapists showed a positive attitude toward using the COPD guideline. Main barriers for implementation were required time investment and financial constraints. The construct of the questionnaire revealed relevant underlying domains for the identification of barriers and facilitators for implementing the COPD guideline. The questionnaire allowed for tailoring to the target group and may be used across health care professionals as basis for in-depth analysis of barriers to specific recommendations in

  11. Physical organogels: mechanism and kinetics of evaporation of the solvents entrapped within network scaffolding

    International Nuclear Information System (INIS)

    Markovic, Nov; Dutta, Naba K.

    2005-01-01

    A series of hydrocarbon gels (based on leaded petrol and decalin) using physically crosslinked networks have been prepared using Al-salt of fatty acid as the physical gelling agent. The effects of gel network scaffolding on the mechanism and kinetics of evaporation of the solvents from the gels were investigated using conventional, isothermal and modulated thermogravimetric analysis. It has been clearly observed that the evaporation of solvent from gels followed a complex evaporation pattern compared to the pure solvent. It appears that with increase in network scaffolding the maximum rate of evaporation of the solvent decreases and its distribution become broader. The activation energy of evaporation for these solvents was found not to be dramatically dependent on the concentration of the gelator and tightness of the network scaffolding. Amongst different methods employed, isothermal measurements provided reliable information about the mechanism of evaporation. Modulated thermogravimetric analysis proved to be an efficient method to achieve kinetic parameters of evaporation from a single dynamic experiment. Scanning electron microscopy was used to probe for both dry gelator and gel network after evaporation of the solvents for evaluation of their surface morphology

  12. Phloem physics: mechanisms, constraints, and perspectives.

    Science.gov (United States)

    Jensen, Kaare H

    2018-04-13

    Plants have evolved specialized vascular tissues for the distribution of energy, water, nutrients, and for communication. The phloem transports sugars from photosynthetic source regions (e.g. mature leaves) to sugar sinks (e.g. developing tissues such as buds, flowers, roots). Moreover, chemical signals such as hormones, RNAs and proteins also move in the phloem. Basic physical processes strongly limit phloem anatomy and function. This paper provides an overview of recent research and perspectives on phloem biomechanics and the physical constraints relevant to sugar transport in plants. Copyright © 2018 Elsevier Ltd. All rights reserved.

  13. Characterization of Physical and Mechanical Properties of Miscible Lactose-Sugars Systems.

    Science.gov (United States)

    Li, Runjing; Roos, Yrjö H; Miao, Song

    2017-09-01

    Lactose-sugars systems were produced by spray drying. They were lactose, lactose-glucose (4:1) mixtures, lactose-maltose (4:1) mixtures, lactose-sucrose (4:1) mixtures, lactose-trehalose (4:1) mixtures, and lactose-corn syrup solids (CSS) (4:1) mixtures. The physical characteristics, water sorption behavior, glass transition, and mechanical properties of miscible lactose-sugars systems were investigated. Lactose-glucose mixtures had larger particle size than other lactose-sugars systems after spray drying. The presence of glucose or sucrose in lactose-sugars mixtures decreased the glass transition temperatures of amorphous systems, while the presence of maltose and trehalose had only minor impact on the glass transition temperatures. Moreover, glucose accelerated the crystallization of amorphous system at 0.44 a w , but its presence delayed the loss of sorbed water at higher water activities (≥0.54 a w ). Mechanical property study indicated that glucose and sucrose in amorphous system could result in an increase of molecular mobility, while the presence of CSS could decrease the free volume and maintain the stiffness of the miscible systems. © 2017 Institute of Food Technologists®.

  14. Examining the Gender Gap in Introductory Physics

    Science.gov (United States)

    Kost, Lauren; Pollock, Steven; Finkelstein, Noah

    2009-05-01

    Our previous research[1] showed that despite the use of interactive engagement techniques in the introductory physics course, the gap in performance between males and females on a mechanics conceptual learning survey persisted from pre- to post-test, at our institution. Such findings were counter to previously published work[2]. Follow-up studies[3] identified correlations between student performance on the conceptual learning survey and students' prior physics and math knowledge and their incoming attitudes and beliefs about physics and learning physics. The results indicate that the gender gap at our institution is predominantly associated with differences in males' and females' previous physics and math knowledge, and attitudes and beliefs. Our current work extends these results in two ways: 1) we look at the gender gap in the second semester of the introductory sequence and find results similar to those in the first semester course and 2) we identify ways in which males and females differentially experience several aspects of the introductory course. [1] Pollock, et al, Phys Rev: ST: PER 3, 010107. [2] Lorenzo, et al, Am J Phys 74, 118. [3] Kost, et al, PERC Proceedings 2008.

  15. Preparation of highly absorbing polymeric hydrogels by radiation processing: mechanical and physical properties

    International Nuclear Information System (INIS)

    Dragusin, M.

    1994-01-01

    Some highly absorbing polymeric hydrogels such as acrylic polymers were produced by radiation processing with gamma sources Co-60 of 10,000 Ci, 3 kGy/h and an electron beam accelerator of 3 - 6 MeV, 0.3 - 3 kGy/s. For practical purposes, such as different applications in agriculture, etc, we studied the physical properties of residual monomers by refractometric and polarographic methods and the mechanical properties (gel strength) with devices made in our laboratory. (Author)

  16. EFFECT OF TEMPERATURE AND pH OF MODIFICATION PROCESS ON THE PHYSICAL-MECHANICAL PROPERTIES OF MODIFIED CASSAVA STARCH

    Directory of Open Access Journals (Sweden)

    Yudi Wicaksono

    2016-11-01

    Full Text Available The use of cassava starch for excipient in the manufacturing of the tablet has some problems, especially on physical-mechanical properties. The purpose of this study was to determine the effect of the differentness of temperature and pH in the process of modification on the physical-mechanical properties of modified cassava starch. Modifications were performed by suspending cassava starch into a solution of 3 % (w/v PVP K30. The effect of the difference of temperature was observed at temperatures of 25; 45 and 65 0C, while the effect of the difference of pH was observed at pH of 4.0; 7.0 and 12.0. The results showed that the temperature and pH did not affect the physical-mechanical properties of the modified cassava starch. Modification of cassava starch at pH and temperature of 7.0 and 45 0C was produced modified cassava starch with the most excellent solubility, while the best swelling power were formed by the modification process at pH and temperature of 7.0 and 25 0C. Overall, the most excellent compression properties of modified cassava starch resulted from the modification process at pH 12.

  17. Capillary-Physics Mechanism of Elastic-Wave Mobilization of Residual Oil

    Science.gov (United States)

    Beresnev, I. A.; Pennington, W. D.; Turpening, R. M.

    2003-12-01

    Much attention has been given to the possibility of vibratory mobilization of residual oil as a method of enhanced recovery. The common features of the relevant applications have nonetheless been inconsistency in the results of field tests and the lack of understanding of a physical mechanism that would explain variable experiences. Such a mechanism can be found in the physics of capillary trapping of oil ganglia, driven through the pore channels by an external pressure gradient. Entrapping of ganglia occurs due to the capillary pressure building on the downstream meniscus entering a narrow pore throat. The resulting internal-pressure imbalance acts against the external gradient, which needs to exceed a certain threshold to carry the ganglion through. The ganglion flow thus exhibits the properties of the Bingham (yield-stress) flow, not the Darcy flow. The application of vibrations is equivalent to the addition of an oscillatory forcing to the constant gradient. When this extra forcing acts along the gradient, an instant "unplugging" occurs, while, when the vibration reverses direction, the flow is plugged. This asymmetry results in an average non-zero flow over one period of vibration, which explains the mobilization effect. The minimum-amplitude and maximum-frequency thresholds apply for the mobilization to occur. When the vibration amplitude exceeds a certain "saturation" level, the flow returns to the Darcy regime. The criterion of the mobilization of a particular ganglion involves the parameters of both the medium (pore geometry, interfacial and wetting properties, fluid viscosity) and the oscillatory field (amplitude and frequency). The medium parameters vary widely under natural conditions. It follows that an elastic wave with a given amplitude and frequency will always produce a certain mobilization effect, mobilizing some ganglia and leaving others intact. The exact macroscopic effect is hard to predict, as it will represent a response of the populations

  18. Mechanical and Physical Properties of Polyester Polymer Concrete Using Recycled Aggregates from Concrete Sleepers

    OpenAIRE

    Carrión, F.; Montalban Domingo, Maria Laura; Real Herráiz, Julia Irene; Real, T.

    2014-01-01

    Currently, reuse of solid waste from disused infrastructures is an important environmental issue to study. In this research, polymer concrete was developed by mixing orthophthalic unsaturated polyester resin, artificial microfillers (calcium carbonate) and waste aggregates (basalt and limestone) coming from the recycling process of concrete sleepers. The variation of the mechanical and physical properties of the polymer concrete (compressive strenght, flexural strength, modulus of elasticity,...

  19. Modeling the mechanics of cancer: effect of changes in cellular and extra-cellular mechanical properties.

    Science.gov (United States)

    Katira, Parag; Bonnecaze, Roger T; Zaman, Muhammad H

    2013-01-01

    Malignant transformation, though primarily driven by genetic mutations in cells, is also accompanied by specific changes in cellular and extra-cellular mechanical properties such as stiffness and adhesivity. As the transformed cells grow into tumors, they interact with their surroundings via physical contacts and the application of forces. These forces can lead to changes in the mechanical regulation of cell fate based on the mechanical properties of the cells and their surrounding environment. A comprehensive understanding of cancer progression requires the study of how specific changes in mechanical properties influences collective cell behavior during tumor growth and metastasis. Here we review some key results from computational models describing the effect of changes in cellular and extra-cellular mechanical properties and identify mechanistic pathways for cancer progression that can be targeted for the prediction, treatment, and prevention of cancer.

  20. Concepts of particle physics

    International Nuclear Information System (INIS)

    Gottfried, K.; Weisskopf, V.F.

    1984-01-01

    This volume elucidates basic and well-established concepts of particle physics for the autodidact who is curious about recent developments in fundamental physics. Elementary quantum mechanics is a background must. Contents, abridged: The evolution of the particle concept before the advent of quantum mechanics. Nonrelativistic quantum mechanics and atomic physics. Relativistic quantum theory. Nuclear phenomena. Subnuclear phenomena. Index

  1. Physical Activity and Gastrointestinal Cancers: Primary and Tertiary Preventive Effects and Possible Biological Mechanisms

    Directory of Open Access Journals (Sweden)

    Karen Steindorf

    2015-07-01

    Full Text Available Gastrointestinal cancers account for 37% of all cancer deaths worldwide, underlining the need to further investigate modifiable factors for gastrointestinal cancer risk and prognosis. This review summarizes the corresponding evidence for physical activity (PA, including, briefly, possible biological mechanisms. Despite high public health relevance, there is still a scarcity of studies, especially for tertiary prevention. Besides the convincing evidence of beneficial effects of PA on colon cancer risk, clear risk reduction for gastroesophageal cancer was identified, as well as weak indications for pancreatic cancer. Inverse associations were observed for liver cancer, yet based on few studies. Only for rectal cancer, PA appeared to be not associated with cancer risk. With regard to cancer-specific mortality of the general population, published data were rare but indicated suggestive evidence of protective effects for colon and liver cancer, and to a lesser extent for rectal and gastroesophageal cancer. Studies in cancer patients on cancer-specific and total mortality were published for colorectal cancer only, providing good evidence of inverse associations with post-diagnosis PA. Overall, evidence of associations of PA with gastrointestinal cancer risk and progression is promising but still limited. However, the already available knowledge further underlines the importance of PA to combat cancer.

  2. A cyber-physical approach to experimental fluid mechanics

    Science.gov (United States)

    Mackowski, Andrew Williams

    This Thesis documents the design, implementation, and use of a novel type of experimental apparatus, termed Cyber-Physical Fluid Dynamics (CPFD). Unlike traditional fluid mechanics experiments, CPFD is a general-purpose technique that allows one to impose arbitrary forces on an object submerged in a fluid. By combining fluid mechanics with robotics, we can perform experiments that would otherwise be incredibly difficult or time-consuming. More generally, CPFD allows a high degree of automation and control of the experimental process, allowing for much more efficient use of experimental facilities. Examples of CPFD's capabilites include imposing a gravitational force in the horizontal direction (allowing a test object to "fall" sideways in a water channel), simulating nonlinear springs for a vibrating fluid-structure system, or allowing a self-propelled body to move forward under its own force. Because experimental parameters (including forces and even the mass of the test object) are defined in software, one can define entire ensembles of experiments to run autonomously. CPFD additionally integrates related systems such as water channel speed control, LDV flow speed measurements, and PIV flowfield measurements. The end result is a general-purpose experimental system that opens the door to a vast array of fluid-structure interaction problems. We begin by describing the design and implementation of CPFD, the heart of which is a high-performance force-feedback control system. Precise measurement of time-varying forces (including removing effects of the test object's inertia) is more critical here than in typical robotic force-feedback applications. CPFD is based on an integration of ideas from control theory, fluid dynamics, computer science, electrical engineering, and solid mechanics. We also describe experiments using the CPFD experimental apparatus to study vortex-induced vibration (VIV) and oscillating-airfoil propulsion. We show how CPFD can be used to simulate

  3. Laboratory Investigation on Physical and Mechanical Properties of Granite After Heating and Water-Cooling Treatment

    Science.gov (United States)

    Zhang, Fan; Zhao, Jianjian; Hu, Dawei; Skoczylas, Frederic; Shao, Jianfu

    2018-03-01

    High-temperature treatment may cause changes in physical and mechanical properties of rocks. Temperature changing rate (heating, cooling and both of them) plays an important role in those changes. Thermal conductivity tests, ultrasonic pulse velocity tests, gas permeability tests and triaxial compression tests are performed on granite samples after a heating and rapid cooling treatment in order to characterize the changes in physical and mechanical properties. Seven levels of temperature (from 25 to 900 °C) are used. It is found that the physical and mechanical properties of granite are significantly deteriorated by the thermal treatment. The porosity shows a significant increase from 1.19% at the initial state to 6.13% for samples heated to 900 °C. The increase in porosity is mainly due to three factors: (1) a large number of microcracks caused by the rapid cooling rate; (2) the mineral transformation of granite through high-temperature heating and water-cooling process; (3) the rapid cooling process causes the mineral particles to weaken. As the temperature of treatment increases, the thermal conductivity and P-wave velocity decrease while the gas permeability increases. Below 200 °C, the elastic modulus and cohesion increase with temperature increasing. Between 200 and 500 °C, the elastic modulus and cohesion have no obvious change with temperature. Beyond 500 °C, as the temperature increases, the elastic modulus and cohesion obviously decrease and the decreasing rate becomes slower with the increase in confining pressure. Poisson's ratio and internal frictional coefficient have no obvious change as the temperature increases. Moreover, there is a transition from a brittle to ductile behavior when the temperature becomes high. At 900 °C, the granite shows an obvious elastic-plastic behavior.

  4. Virtual laboratory learning media development to improve science literacy skills of mechanical engineering students on basic physics concept of material measurement

    Science.gov (United States)

    Jannati, E. D.; Setiawan, A.; Siahaan, P.; Rochman, C.

    2018-05-01

    This study aims to determine the description of virtual laboratory learning media development to improve science literacy skills of Mechanical Engineering students on the concept of basic Physics. Quasi experimental method was employed in this research. The participants of this research were first semester students of mechanical engineering in Majalengka University. The research instrument was readability test of instructional media. The results of virtual laboratory learning media readability test show that the average score is 78.5%. It indicates that virtual laboratory learning media development are feasible to be used in improving science literacy skill of Mechanical Engineering students in Majalengka University, specifically on basic Physics concepts of material measurement.

  5. Mathematical mechanic using physical reasoning to solve problems

    CERN Document Server

    Levi, Mark

    2009-01-01

    Everybody knows that mathematics is indispensable to physics--imagine where we'd be today if Einstein and Newton didn't have the math to back up their ideas. But how many people realize that physics can be used to produce many astonishing and strikingly elegant solutions in mathematics? Mark Levi shows how in this delightful book, treating readers to a host of entertaining problems and mind-bending puzzlers that will amuse and inspire their inner physicist. Levi turns math and physics upside down, revealing how physics can simplify proofs and lead to quicker solutions and new theorems, and how physical solutions can illustrate why results are true in ways lengthy mathematical calculations never can

  6. Physical and Mechanical Properties of Sorghum Grains (Sorghum Vulgare

    Directory of Open Access Journals (Sweden)

    2016-11-01

    Full Text Available The physical and mechanical properties of sorghum grains (sorghum vulgare were studied at varying moisture contents of 13%, 20% and 30% (w.b. The four varieties of sorghum grains studied include; Dura, Guinea, Faterita and Kafir. Results indicate that the size ranges were 3.94mm - 4.83mm for Dura variety; 3.75mm - 4.54mm for Guinea variety; 3.21mm - 4.42mm for Kafir variety and 2.70mm - 4.14mm for Faterita variety. Irregularities in the shapes of the grains were observed but all approximated to a sphere. In the mechanical properties, at major diameter, Dura variety had highest rupture force of 1.16kN at 13% moisture content (w.b while the Guinea variety had the lowest rupture force of 0.955kN. In minor diameter, the Dura variety also recorded highest rupture force of 1.12kN at 13% moisture content (w.b while the Kafir variety had the lowest value of 0.952kN. Also at 20% moisture content, the Dura variety had highest rupture force of 1.025kN while the Guinea variety had the lowest rupture force of 0.965kN. The same trend applies in the varieties at 30% moisture content. This is because, increase in moisture content results to decrease in rupture force. And this implies that force beyond these points at these moisture contents may cause damage to the sorghum varieties.

  7. An integrated program for developing auxillary processes and mechanization of physical labor in coal enterprises

    Energy Technology Data Exchange (ETDEWEB)

    Lostorfer, R.; Bendzsak, I.; Jakucs, S.; Lahorszki, L.; Rosa, A.; Szalai, K.

    1979-01-01

    After explaining the long-term plan of coal enterprises, a review is given of the engineering and economic system of an enterprise. A detailed analysis of the auxilliary processes and mechanization of physical labor is presented. A description of underground and surface transport, repair of mining vehicles, stock-piling and preservation of tailings are presented.

  8. Identifying profiles of actual and perceived motor competence among adolescents: associations with motivation, physical activity, and sports participation.

    Science.gov (United States)

    De Meester, An; Maes, Jolien; Stodden, David; Cardon, Greet; Goodway, Jacqueline; Lenoir, Matthieu; Haerens, Leen

    2016-11-01

    The present study identified adolescents' motor competence (MC)-based profiles (e.g., high actual and low perceived MC), and accordingly investigated differences in motivation for physical education (PE), physical activity (PA) levels, and sports participation between profiles by using regression analyses. Actual MC was measured with the Körperkoordinationstest für Kinder. Adolescents (n = 215; 66.0% boys; mean age = 13.64 ± .58 years) completed validated questionnaires to assess perceived MC, motivation for PE, PA-levels, and sports participation. Actual and perceived MC were only moderately correlated and cluster analyses identified four groups. Two groups of overestimators (low - overestimation, average - overestimation) were identified (51%), who particularly displayed better motivation for PE when compared to their peers who accurately estimated themselves (low - accurate, average - accurate). Moreover, adolescents with low actual MC, but high perceived MC were significantly more active than adolescents with low actual MC who accurately estimated themselves. Results pointed in the same direction for organised sports participation. Underestimators were not found in the current sample, which is positive as underestimation might negatively influence adolescents' motivation to achieve and persist in PA and sports. In conclusion, results emphasise that developing perceived MC, especially among adolescents with low levels of actual MC, seems crucial to stimulate motivation for PE, and engagement in PA and sports.

  9. A systems biology strategy to identify molecular mechanisms of action and protein indicators of traumatic brain injury.

    Science.gov (United States)

    Yu, Chenggang; Boutté, Angela; Yu, Xueping; Dutta, Bhaskar; Feala, Jacob D; Schmid, Kara; Dave, Jitendra; Tawa, Gregory J; Wallqvist, Anders; Reifman, Jaques

    2015-02-01

    The multifactorial nature of traumatic brain injury (TBI), especially the complex secondary tissue injury involving intertwined networks of molecular pathways that mediate cellular behavior, has confounded attempts to elucidate the pathology underlying the progression of TBI. Here, systems biology strategies are exploited to identify novel molecular mechanisms and protein indicators of brain injury. To this end, we performed a meta-analysis of four distinct high-throughput gene expression studies involving different animal models of TBI. By using canonical pathways and a large human protein-interaction network as a scaffold, we separately overlaid the gene expression data from each study to identify molecular signatures that were conserved across the different studies. At 24 hr after injury, the significantly activated molecular signatures were nonspecific to TBI, whereas the significantly suppressed molecular signatures were specific to the nervous system. In particular, we identified a suppressed subnetwork consisting of 58 highly interacting, coregulated proteins associated with synaptic function. We selected three proteins from this subnetwork, postsynaptic density protein 95, nitric oxide synthase 1, and disrupted in schizophrenia 1, and hypothesized that their abundance would be significantly reduced after TBI. In a penetrating ballistic-like brain injury rat model of severe TBI, Western blot analysis confirmed our hypothesis. In addition, our analysis recovered 12 previously identified protein biomarkers of TBI. The results suggest that systems biology may provide an efficient, high-yield approach to generate testable hypotheses that can be experimentally validated to identify novel mechanisms of action and molecular indicators of TBI. © 2014 The Authors. Journal of Neuroscience Research Published by Wiley Periodicals, Inc.

  10. Photocrosslinked PLA-PEO-PLA Hydrogels from Self-Assembled Physical Networks: Mechanical Properties and Influence of Assumed Constitutive Relationships

    Science.gov (United States)

    Sanabria-DeLong, Naomi; Crosby, Alfred J.; Tew, Gregory N.

    2014-01-01

    Poly(lactide) – block – poly(ethylene oxide) – block – poly(lactide) [PLA-PEO-PLA] triblock copolymers are known to form physical hydrogels in water, due to the polymer's amphiphilicity. Their mechanical properties, biocompatibility, and biodegradability have made them attractive for use as soft tissue scaffolds. However, the network junction points are not covalently crosslinked and in a highly aqueous environment these hydrogels adsorb more water, transform from gel to sol, and lose the designed mechanical properties. In this report, a hydrogel was formed by using a novel two step approach. In the first step end-functionalized PLA-PEOPLA triblock was self-assembled into a physical hydrogel through hydrophobic micelle network junctions, and then, in the second step, this self-assembled physical network structure was locked into place by photocrosslinking the terminal acrylate groups. In contrast to physical hydrogels, the photocrosslinked gels remained intact in phosphate buffered solution at body temperature. The swelling, degradation, and mechanical properties were characterized and demonstrated extended degradation time (~ 65 days), exponential decrease in modulus with degradation time, and tunable shear modulus (1.6 – 133 kPa) by varying concentration. We also discuss the various constitutive relationships (Hookean, Neo-Hookean, and Mooney-Rivlin) that can be used to describe the stress-strain behavior of these hydrogels. The chosen model and assumptions used for data fitting influences the obtained modulus values by as much as a factor of 3.5, demonstrating the importance of clearly stating one's data fitting parameters so that accurate comparisons can be made within the literature. PMID:18817440

  11. The Short Physical Performance Battery is a discriminative tool for identifying patients with COPD at risk of disability

    Directory of Open Access Journals (Sweden)

    Bernabeu-Mora R

    2015-12-01

    Full Text Available Roberto Bernabeu-Mora,1,2 Françesc Medina-Mirapeix,2 Eduardo Llamazares-Herrán,3 Gloria García-Guillamón,2 Luz María Giménez-Giménez,2 Juan Miguel Sánchez-Nieto1,4 1Division of Pneumology, Hospital Morales Meseguer, 2Department of Physical Therapy, University of Murcia, Murcia, 3Department of Physical Therapy, Alcala University, Alcala de Henares, 4Department of Intern Medical, University of Murcia, Murcia, Spain Background: Limited mobility is a risk factor for developing chronic obstructive pulmonary disease (COPD-related disabilities. Little is known about the validity of the Short Physical Performance Battery (SPPB for identifying mobility limitations in patients with COPD. Objective: To determine the clinical validity of the SPPB summary score and its three components (standing balance, 4-meter gait speed, and five-repetition sit-to-stand for identifying mobility limitations in patients with COPD.Methods: This cross-sectional study included 137 patients with COPD, recruited from a hospital in Spain. Muscle strength tests and SPPB were measured; then, patients were surveyed for self-reported mobility limitations. The validity of SPPB scores was analyzed by developing receiver operating characteristic curves to analyze the sensitivity and specificity for identifying patients with mobility limitations; by examining group differences in SPPB scores across categories of mobility activities; and by correlating SPPB scores to strength tests.Results: Only the SPPB summary score and the five-repetition sit-to-stand components showed good discriminative capabilities; both showed areas under the receiver operating characteristic curves greater than 0.7. Patients with limitations had significantly lower SPPB scores than patients without limitations in nine different mobility activities. SPPB scores were moderately correlated with the quadriceps test (r>0.40, and less correlated with the handgrip test (r<0.30, which reinforced convergent and

  12. The Role of Self-Efficacy and Friend Support on Adolescent Vigorous Physical Activity

    Science.gov (United States)

    Hamilton, Kyra; Warner, Lisa M.; Schwarzer, Ralf

    2017-01-01

    Objectives: Physical activity, including some form of vigorous activity, is a key component of a healthy lifestyle in young people. Self-efficacy and social support have been identified as key determinants of physical activity; however, the mechanism that reflects the interplay of these two factors is not well understood. The aim of the current…

  13. Research physic-mechanical properties of composite materials on the base of peeled veneer and low density polyethylene

    Science.gov (United States)

    Ibragimov, Aleksandr; Vasilkin, Andrey; Fedotov, Aleksandr

    2017-10-01

    Use film of LDPE as thermoplastic binder for production of plywood is proposed. Results of physic-mechanical properties of plywood based on the LDPE film of different thicknesses in comparison with conventional thermosetting synthetic binder are presented.

  14. Existence and asymptotic estimates of periodic solutions of El Niño mechanism of atmospheric physics

    International Nuclear Information System (INIS)

    Xiao-Jing, Li

    2010-01-01

    This paper is devoted to studying the El Niño mechanism of atmospheric physics. The existence and asymptotic estimates of periodic solutions for its model are obtained by employing the technique of upper and lower solution, and using the continuation theorem of coincidence degree theory. (general)

  15. Discrete mechanics

    CERN Document Server

    Caltagirone, Jean-Paul

    2014-01-01

    This book presents the fundamental principles of mechanics to re-establish the equations of Discrete Mechanics. It introduces physics and thermodynamics associated to the physical modeling.  The development and the complementarity of sciences lead to review today the old concepts that were the basis for the development of continuum mechanics. The differential geometry is used to review the conservation laws of mechanics. For instance, this formalism requires a different location of vector and scalar quantities in space. The equations of Discrete Mechanics form a system of equations where the H

  16. Physical mechanism of mind changes and tradeoffs among speed, accuracy, and energy cost in brain decision making: Landscape, flux, and path perspectives

    International Nuclear Information System (INIS)

    Yan Han; Wang Jin; Zhang Kun

    2016-01-01

    Cognitive behaviors are determined by underlying neural networks. Many brain functions, such as learning and memory, have been successfully described by attractor dynamics. For decision making in the brain, a quantitative description of global attractor landscapes has not yet been completely given. Here, we developed a theoretical framework to quantify the landscape associated with the steady state probability distributions and associated steady state curl flux, measuring the degree of non-equilibrium through the degree of detailed balance breaking for decision making. We quantified the decision-making processes with optimal paths from the undecided attractor states to the decided attractor states, which are identified as basins of attractions, on the landscape. Both landscape and flux determine the kinetic paths and speed. The kinetics and global stability of decision making are explored by quantifying the landscape topography through the barrier heights and the mean first passage time. Our theoretical predictions are in agreement with experimental observations: more errors occur under time pressure. We quantitatively explored two mechanisms of the speed-accuracy tradeoff with speed emphasis and further uncovered the tradeoffs among speed, accuracy, and energy cost. Our results imply that there is an optimal balance among speed, accuracy, and the energy cost in decision making. We uncovered the possible mechanisms of changes of mind and how mind changes improve performance in decision processes. Our landscape approach can help facilitate an understanding of the underlying physical mechanisms of cognitive processes and identify the key factors in the corresponding neural networks. (paper)

  17. Physical mechanism for gating and mechanosensitivity of the human TRAAK K+ channel

    Science.gov (United States)

    Brohawn, Stephen G.; Campbell, Ernest B.; MacKinnon, Roderick

    2015-01-01

    Summary Activation of mechanosensitive ion channels by physical force underlies many physiological processes including the sensation of touch, hearing and pain1–5. TRAAK ion channels are neuronally expressed members of the two-pore domain K+ (K2P) channel family and are mechanosensitive6. They are involved in controlling mechanical and temperature nociception in mice7. Mechanosensitivity of TRAAK is mediated directly through the lipid bilayer: it is a membrane tension gated channel8. However, the molecular mechanism of TRAAK channel gating and mechanosensitivity is unknown. Here we present crystal structures of TRAAK in conductive and nonconductive conformations defined by the presence of permeant ions along the conduction pathway. In the nonconductive state, a lipid acyl chain accesses the channel cavity through a 5 Å-wide lateral opening in the membrane inner leaflet and physically blocks ion passage. In the conductive state, rotation of a transmembrane helix (TM4) about a central hinge seals the intramembrane opening, preventing lipid block of the cavity and permitting ion entry. Additional rotation of a membrane interacting TM2-TM3 segment, unique to mechanosensitive K2Ps, against TM4 may further stabilize the conductive conformation. Comparison of the structures reveals a biophysical explanation for TRAAK mechanosensitivity: an expansion in cross sectional area up to 2.7 nm2 in the conductive state is expected to create a membrane tension-dependent energy difference between conformations that promotes force activation. Our results show how tension of the lipid bilayer can be harnessed to control gating and mechanosensitivity of a eukaryotic ion channel. PMID:25471887

  18. Mechanical and physical properties of LVL panels made from three amazonic species

    Directory of Open Access Journals (Sweden)

    Nerci Nina Lima

    2013-09-01

    Full Text Available This work aimed to evaluate the physical-mechanical performance of laminated veneer lumber (LV produced with different compositions of tropical Amazonian species and Pinus oocarpa. Three tropical species were used: Cordia goeldiana Huber. (Freijó, Parkia gigantocarpa Ducke (Faveira and Brosimum parinarioides Ducke (Amapá doce. For comparison, Pinus oocarpa wood obtained from an experimental stand was used. Three types of veneer combination were evaluated: (i one species; (ii the three Amazonian species combination and (iii combination of Amazonian species with Pinus oocarpa. The acoustic propagation velocity was also evaluated with the stress wave timer for correlation between dynamic modulus of elasticity (MOEd and static modulus of elasticity (MOEs of the panel. Panels produced with Amazonian species presented lower water absorption than Pinus oocarpa panels. Regarding the mechanical properties, the lowest strength was verified for "faveira" panels. There was no statistical difference among panels in glue line shear strength. The stress wave timer could be used for prediction of MOEs by using MOEd.

  19. Statistical physics as an approximate method of many-body quantum mechanics in the representation of occupation numbers

    International Nuclear Information System (INIS)

    Kushnirenko, A.N.

    1989-01-01

    An attempt was made to substantiate statistical physics from the viewpoint of many-body quantum mechanics in the representation of occupation numbers. This approach enabled to develop the variation method for solution of stationary and nonstationary nonequilibrium problems

  20. Quantum physics

    International Nuclear Information System (INIS)

    Basdevant, J.L.; Dalibart, J.

    1997-01-01

    This pedagogical book gives an initiation to the principles and practice of quantum mechanics. A large part is devoted to experimental facts and to their analysis: concrete facts, phenomena and applications related to fundamental physics, elementary particles, astrophysics, high-technology, semi-conductors, micro-electronics and lasers. The book is divided in 22 chapters dealing with: quantum phenomena, wave function and Schroedinger equation, physical units and measurements, energy quantification of some simple systems, Hilbert space, Dirac formalism and quantum mechanics postulates, two-state systems and ammonia Maser principle, bands theory and crystals conductibility, commutation of observables, Stern and Gerlach experiment, approximation methods, kinetic momentum in quantum mechanics, first description of atoms, 1/2 spin formalism and magnetic resonance, Lagrangian, Hamiltonian and Lorentz force in quantum mechanics, addition of kinetic momenta and fine and hyper-fine structure of atomic lines, identical particle systems and Pauli principle, qualitative physics and scale of size of some microscopic and macroscopic phenomena, systems evolution, collisions and cross sections, invariance and conservation laws, quantum mechanics and astrophysics, and historical aspects of quantum mechanics. (J.S.)

  1. Mechanical and physical properties of 2 1/4 Cr--1 Mo steel in support of CRBRP steam generator design

    International Nuclear Information System (INIS)

    Brinkman, C.R.; Williams, R.K.; Klueh, R.L.; Hebble, T.L.

    1975-01-01

    Mechanical and physical property tests on annealed 2 1 / 4 Cr-1 Mo steel were conducted in an effort to define behavior in support of the design of the Clinch River Breeder Reactor Plant (CRBRP) steam generator design. Interim empirical expressions and/or data are reported from the results of tensile, creep, fatigue, creep-fatigue, subcritical crack growth, thermal conductivity, thermal diffusivity, and thermal expansion tests and analysis. These expressions cover behavior, where appropriate, over a range of temperatures from 25 to as high as 700 0 C. Comparisons between thermal conductivity and diffusivity values and those found in the American Society of Mechanical Engineers (ASME) Code indicated that the new values were significantly higher than those found presently in the Code. The importance and complexity of obtaining valid mechanical and physical properties for the Clinch River Breeder Reactor Plant (CRBRP) steam generator are discussed. (U.S.)

  2. Boron carbide reinforced aluminium matrix composite: Physical, mechanical characterization and mathematical modelling

    International Nuclear Information System (INIS)

    Shirvanimoghaddam, K.; Khayyam, H.; Abdizadeh, H.; Karbalaei Akbari, M.; Pakseresht, A.H.; Ghasali, E.; Naebe, M.

    2016-01-01

    This paper investigates the manufacturing of aluminium–boron carbide composites using the stir casting method. Mechanical and physical properties tests to obtain hardness, ultimate tensile strength (UTS) and density are performed after solidification of specimens. The results show that hardness and tensile strength of aluminium based composite are higher than monolithic metal. Increasing the volume fraction of B_4C, enhances the tensile strength and hardness of the composite; however over-loading of B_4C caused particle agglomeration, rejection from molten metal and migration to slag. This phenomenon decreases the tensile strength and hardness of the aluminium based composite samples cast at 800 °C. For Al-15 vol% B_4C samples, the ultimate tensile strength and Vickers hardness of the samples that were cast at 1000 °C, are the highest among all composites. To predict the mechanical properties of aluminium matrix composites, two key prediction modelling methods including Neural Network learned by Levenberg–Marquardt Algorithm (NN-LMA) and Thin Plate Spline (TPS) models are constructed based on experimental data. Although the results revealed that both mathematical models of mechanical properties of Al–B_4C are reliable with a high level of accuracy, the TPS models predict the hardness and tensile strength values with less error compared to NN-LMA models.

  3. A course in mathematical physics 3 quantum mechanics of atoms and molecules

    CERN Document Server

    Thirring, Walter

    1981-01-01

    In this third volume of A Course in Mathematical Physics I have attempted not simply to introduce axioms and derive quantum mechanics from them, but also to progress to relevant applications. Reading the axiomatic litera­ ture often gives one the impression that it largely consists of making refined axioms, thereby freeing physics from any trace of down-to-earth residue and cutting it off from simpler ways of thinking. The goal pursued here, however, is to come up with concrete results that can be compared with experimental facts. Everything else should be regarded only as a side issue, and has been chosen for pragmatic reasons. It is precisely with this in mind that I feel it appropriate to draw upon the most modern mathematical methods. Only by their means can the logical fabric of quantum theory be woven with a smooth structure; in their absence, rough spots would . inevitably appear, especially in the theory of unbounded operators, where the details are too intricate to be comprehended easily. Great care...

  4. Mechanical and Physical Properties of Polyester Polymer Concrete Using Recycled Aggregates from Concrete Sleepers

    Directory of Open Access Journals (Sweden)

    Francisco Carrión

    2014-01-01

    Full Text Available Currently, reuse of solid waste from disused infrastructures is an important environmental issue to study. In this research, polymer concrete was developed by mixing orthophthalic unsaturated polyester resin, artificial microfillers (calcium carbonate, and waste aggregates (basalt and limestone coming from the recycling process of concrete sleepers. The variation of the mechanical and physical properties of the polymer concrete (compressive strength, flexural strength, modulus of elasticity, density, and water absorption was analyzed based on the modification of different variables: nature of the recycled aggregates, resin contents (11 wt%, 12 wt%, and 13 wt%, and particle-size distributions of microfillers used. The results show the influence of these variables on mechanical performance of polymer concrete. Compressive and flexural strength of recycled polymer concrete were improved by increasing amount of polyester resin and by optimizing the particle-size distribution of the microfillers. Besides, the results show the feasibility of developing a polymer concrete with excellent mechanical behavior.

  5. Mechanical and physical properties of polyester polymer concrete using recycled aggregates from concrete sleepers.

    Science.gov (United States)

    Carrión, Francisco; Montalbán, Laura; Real, Julia I; Real, Teresa

    2014-01-01

    Currently, reuse of solid waste from disused infrastructures is an important environmental issue to study. In this research, polymer concrete was developed by mixing orthophthalic unsaturated polyester resin, artificial microfillers (calcium carbonate), and waste aggregates (basalt and limestone) coming from the recycling process of concrete sleepers. The variation of the mechanical and physical properties of the polymer concrete (compressive strength, flexural strength, modulus of elasticity, density, and water absorption) was analyzed based on the modification of different variables: nature of the recycled aggregates, resin contents (11 wt%, 12 wt%, and 13 wt%), and particle-size distributions of microfillers used. The results show the influence of these variables on mechanical performance of polymer concrete. Compressive and flexural strength of recycled polymer concrete were improved by increasing amount of polyester resin and by optimizing the particle-size distribution of the microfillers. Besides, the results show the feasibility of developing a polymer concrete with excellent mechanical behavior.

  6. Effect of boron and phosphate compounds on physical, mechanical, and fire properties of wood-polypropylene composites

    Science.gov (United States)

    Nadir Ayrilmis; Turgay Akbulut; Turker Dundar; Robert H. White; Fatih Mengeloglu; Umit Buyuksari; Zeki Candan; Erkan Avci

    2012-01-01

    Physical, mechanical, and fire properties of the injection-molded wood flour/polypropylene composites incorporated with different contents of boron compounds; borax/boric acid and zinc borate, and phosphate compounds; mono and diammonium phosphates were investigated. The effect of the coupling agent content, maleic anhydride-grafted polypropylene, on the properties of...

  7. Effects of Physical Exercise on Alzheimer's Disease Biomarkers

    DEFF Research Database (Denmark)

    Frederiksen, Kristian Steen; Gjerum, Le; Waldemar, Gunhild

    2018-01-01

    Physical exercise may be an important adjunct to pharmacological treatment of Alzheimer's disease (AD). Animal studies indicate that exercise may be disease modifying through several mechanisms including reduction of AD pathology. We carried out a systematic review of intervention studies...... of physical exercise with hippocampal volume (on MRI), amyloid-β, total tau, phosphorylated tau in cerebrospinal fluid (CSF), 18F-FDG-PET or amyloid PET as outcome measures in healthy subjects, patients with subjective memory complaints, mild cognitive impairment, or AD. We identified a total of 8 studies...

  8. Individuals with knee impairments identify items in need of clarification in the Patient Reported Outcomes Measurement Information System (PROMIS®) pain interference and physical function item banks - a qualitative study.

    Science.gov (United States)

    Lynch, Andrew D; Dodds, Nathan E; Yu, Lan; Pilkonis, Paul A; Irrgang, James J

    2016-05-11

    The content and wording of the Patient Reported Outcome Measurement Information System (PROMIS) Physical Function and Pain Interference item banks have not been qualitatively assessed by individuals with knee joint impairments. The purpose of this investigation was to identify items in the PROMIS Physical Function and Pain Interference Item Banks that are irrelevant, unclear, or otherwise difficult to respond to for individuals with impairment of the knee and to suggest modifications based on cognitive interviews. Twenty-nine individuals with knee joint impairments qualitatively assessed items in the Pain Interference and Physical Function Item Banks in a mixed-methods cognitive interview. Field notes were analyzed to identify themes and frequency counts were calculated to identify items not relevant to individuals with knee joint impairments. Issues with clarity were identified in 23 items in the Physical Function Item Bank, resulting in the creation of 43 new or modified items, typically changing words within the item to be clearer. Interpretation issues included whether or not the knee joint played a significant role in overall health and age/gender differences in items. One quarter of the original items (31 of 124) in the Physical Function Item Bank were identified as irrelevant to the knee joint. All 41 items in the Pain Interference Item Bank were identified as clear, although individuals without significant pain substituted other symptoms which interfered with their life. The Physical Function Item Bank would benefit from additional items that are relevant to individuals with knee joint impairments and, by extension, to other lower extremity impairments. Several issues in clarity were identified that are likely to be present in other patient cohorts as well.

  9. Influence of fluorescent dye on physical-mechanical properties of luting cements for confocal microscopy analysis.

    Science.gov (United States)

    Oliveira, Dayane; Prieto, Lúcia; Araújo, Cíntia; Coppini, Erick; Pereira, Gisele; Paulillo, Luís

    2014-12-01

    To evaluate the influence of a fluorescent dye (rhodamine B) on the physical and mechanical properties of three different luting cements: a conventional adhesive luting cement (RelyX ARC, 3M/ESPE), a self-adhesive luting cement (RelyX U-200, 3M/ESPE), and a self-etching and self-adhesive luting cement (SeT PP, SDI). The cements were mixed with 0.03 wt% rhodamine B, formed into bar-shaped specimens (n = 10), and light cured using an LED curing unit (Radii, SDI) with a radiant exposure of 32 J/cm(2) . The Knoop hardness (KHN), flexural strength (FS), and Young's modulus (YM) analyses were evaluated after storage for 24 h. Outcomes were subjected to two-way ANOVA and Tukey's test (P = 0.05) for multiple comparisons. No significant differences in FS or YM were observed among the tested groups (P ≥ 0.05); the addition of rhodamine B increased the hardness of the luting cements tested. The addition of a fluorescent agent at 0.03 wt% concentration does not negatively affect the physical-mechanical properties of the luting cement polymerization behavior. © 2014 Wiley Periodicals, Inc.

  10. PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLEBOARDS OF Acrocarpus fraxinifolius COMPOUNDS WITH DIFFERENT PERCENTAGES OF BARK

    Directory of Open Access Journals (Sweden)

    Rosilani Trianoski

    2013-12-01

    Full Text Available http://dx.doi.org/10.5902/1980509812360The particleboard industries have used a large volume of wood mainly from planted forest of Pinus, beingnecessary to diversify the wood species and optimize the use of raw material. One of the ways to optimizethe use of this resource is the utilization of the bark in the particleboard manufacturing process. In thisway, this research was developed to evaluate the physical and mechanical properties of the particleboardmanufactured with the wood of Acrocarpus fraxinifolius and different proportions of the bark. The boardswere manufactured with 100% of wood particles of Acrocarpus fraxinifolius and replacing the woodparticles with 30%, 20% and 10% of bark, board density of 0.75 g/cm³ and 8% of urea-formaldehyde resin.The properties of board density, water absorption and thickness swelling, static bending, internal bond andscrew pullout strength, were determined according to EN and NBR standards, and then compared with thestandard treatment (100% Pinus taeda and with the minimum requirements of these standards. The resultsindicated that Acrocarpus fraxinifolius species showed technical feasibility for particleboard production and the addition of the bark until 30% did not negatively affect the physical and mechanical properties ofthe boards.

  11. Physical mechanism and numerical simulation of the inception of the lightning upward leader

    International Nuclear Information System (INIS)

    Li Qingmin; Lu Xinchang; Shi Wei; Zhang Li; Zou Liang; Lou Jie

    2012-01-01

    The upward leader is a key physical process of the leader progression model of lightning shielding. The inception mechanism and criterion of the upward leader need further understanding and clarification. Based on leader discharge theory, this paper proposes the critical electric field intensity of the stable upward leader (CEFISUL) and characterizes it by the valve electric field intensity on the conductor surface, E L , which is the basis of a new inception criterion for the upward leader. Through numerical simulation under various physical conditions, we verified that E L is mainly related to the conductor radius, and data fitting yields the mathematical expression of E L . We further establish a computational model for lightning shielding performance of the transmission lines based on the proposed CEFISUL criterion, which reproduces the shielding failure rate of typical UHV transmission lines. The model-based calculation results agree well with the statistical data from on-site operations, which show the effectiveness and validity of the CEFISUL criterion.

  12. Physical activity as a possible mechanism behind the relationship between green space and health: a multilevel analysis.

    NARCIS (Netherlands)

    Maas, J.; Verheij, R.A.; Spreeuwenberg, P.; Groenewegen, P.P.

    2008-01-01

    Background: The aim of this study was to investigate whether physical activity (in general, and more specifically, walking and cycling during leisure time and for commuting purposes, sports and gardening) is an underlying mechanism in the relationship between the amount of green space in people's

  13. Data on the physical and mechanical properties of soilcrete materials modified with metakaolin

    Directory of Open Access Journals (Sweden)

    Panagiotis G. Asteris

    2017-08-01

    Full Text Available During the last decades eco-friendly, low-cost, sustainable construction materials for utilization in civil engineering projects have attracted much attention. To this end, soilcretes are non-conventional construction materials produced by mixing natural soil such as natural clay or limestone sand with a hydraulic binder and are recently under detailed and in-depth investigation by many researchers. In this paper the results of the physical and mechanical characteristics of a large set of cylindrical specimens under uniaxial compression, are presented. Specifically, two types of soils such as sand and clay with metakaolin as a mineral additive have been used. This database can be extremely valuable for better understanding of the behavior of soilcrete materials. Furthermore, the results presented herein expected to be of great interest for researchers who deal with the prediction of mechanical properties of materials using soft computing techniques such as artificial intelligence (AI techniques.

  14. Molecular imaging and the unification of multilevel mechanisms and data in medical physics

    International Nuclear Information System (INIS)

    Nikiforidis, George C.; Sakellaropoulos, George C.; Kagadis, George C.

    2008-01-01

    Molecular imaging (MI) constitutes a recently developed approach of imaging, where modalities and agents have been reinvented and used in novel combinations in order to expose and measure biologic processes occurring at molecular and cellular levels. It is an approach that bridges the gap between modalities acquiring data from high (e.g., computed tomography, magnetic resonance imaging, and positron-emitting isotopes) and low (e.g., PCR, microarrays) levels of a biological organization. While data integration methodologies will lead to improved diagnostic and prognostic performance, interdisciplinary collaboration, triggered by MI, will result in a better perception of the underlying biological mechanisms. Toward the development of a unifying theory describing these mechanisms, medical physicists can formulate new hypotheses, provide the physical constraints bounding them, and consequently design appropriate experiments. Their new scientific and working environment calls for interventions in their syllabi to educate scientists with enhanced capabilities for holistic views and synthesis.

  15. Data on the physical and mechanical properties of soilcrete materials modified with metakaolin.

    Science.gov (United States)

    Asteris, Panagiotis G; Kolovos, Konstantinos G

    2017-08-01

    During the last decades eco-friendly, low-cost, sustainable construction materials for utilization in civil engineering projects have attracted much attention. To this end, soilcretes are non-conventional construction materials produced by mixing natural soil such as natural clay or limestone sand with a hydraulic binder and are recently under detailed and in-depth investigation by many researchers. In this paper the results of the physical and mechanical characteristics of a large set of cylindrical specimens under uniaxial compression, are presented. Specifically, two types of soils such as sand and clay with metakaolin as a mineral additive have been used. This database can be extremely valuable for better understanding of the behavior of soilcrete materials. Furthermore, the results presented herein expected to be of great interest for researchers who deal with the prediction of mechanical properties of materials using soft computing techniques such as artificial intelligence (AI) techniques.

  16. Coupled Thermo-Mechanical and Photo-Chemical Degradation Mechanisms that determine the Reliability and Operational Lifetimes for CPV Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Dauskardt, Reinhold H. [Stanford Univ., CA (United States)

    2017-04-30

    This project sought to identify and characterize the coupled intrinsic photo-chemo-mechanical degradation mechanisms that determine the reliability and operational lifetimes for CPV technologies. Over a three year period, we have completed a highly successful program which has developed quantitative metrologies and detailed physics-based degradation models, providing new insight into the fundamental reliability physics necessary for improving materials, creating accelerated testing protocols, and producing more accurate lifetime predictions. The tasks for the program were separated into two focus areas shown in the figure below. Focus Area 1, led by Reinhold Dauskardt and Warren Cai with a primary collaboration with David Miller of NREL, studied the degradation mechanisms present in encapsulant materials. Focus Area 2, led by Reinhold Dauskardt and Ryan Brock with a primary collaboration with James Ermer and Peter Hebert of Spectrolab, studied stress development and degradation within internal CPV device interfaces. Each focus area was productive, leading to several publications, including findings on the degradation of silicone encapsulant under terrestrial UV, a model for photodegradation of silicone encapsulant adhesion, quantification and process tuning of antireflective layers on CPV, and discovery of a thermal cycling degradation mechanism present in metal gridline structures.

  17. Behaviour change techniques in physical activity interventions for men with prostate cancer: A systematic review.

    Science.gov (United States)

    Hallward, Laura; Patel, Nisha; Duncan, Lindsay R

    2018-02-01

    Physical activity interventions can improve prostate cancer survivors' health. Determining the behaviour change techniques used in physical activity interventions can help elucidate the mechanisms by which an intervention successfully changes behaviour. The purpose of this systematic review was to identify and evaluate behaviour change techniques in physical activity interventions for prostate cancer survivors. A total of 7 databases were searched and 15 studies were retained. The studies included a mean 6.87 behaviour change techniques (range = 3-10), and similar behaviour change techniques were implemented in all studies. Consideration of how behaviour change techniques are implemented may help identify how behaviour change techniques enhance physical activity interventions for prostate cancer survivors.

  18. Identifying group-sensitive physical activities: a differential item functioning analysis of NHANES data.

    Science.gov (United States)

    Gao, Yong; Zhu, Weimo

    2011-05-01

    The purpose of this study was to identify subgroup-sensitive physical activities (PA) using differential item functioning (DIF) analysis. A sub-unweighted sample of 1857 (men=923 and women=934) from the 2003-2004 National Health and Nutrition Examination Survey PA questionnaire data was used for the analyses. Using the Mantel-Haenszel, the simultaneous item bias test, and the ANOVA DIF methods, 33 specific leisure-time moderate and/or vigorous PA (MVPA) items were analyzed for DIF across race/ethnicity, gender, education, income, and age groups. Many leisure-time MVPA items were identified as large DIF items. When participating in the same amount of leisure-time MVPA, non-Hispanic blacks were more likely to participate in basketball and dance activities than non-Hispanic whites (NHW); NHW were more likely to participated in golf and hiking than non-Hispanic blacks; Hispanics were more likely to participate in dancing, hiking, and soccer than NHW, whereas NHW were more likely to engage in bicycling, golf, swimming, and walking than Hispanics; women were more likely to participate in aerobics, dancing, stretching, and walking than men, whereas men were more likely to engage in basketball, fishing, golf, running, soccer, weightlifting, and hunting than women; educated persons were more likely to participate in jogging and treadmill exercise than less educated persons; persons with higher incomes were more likely to engage in golf than those with lower incomes; and adults (20-59 yr) were more likely to participate in basketball, dancing, jogging, running, and weightlifting than older adults (60+ yr), whereas older adults were more likely to participate in walking and golf than younger adults. DIF methods are able to identify subgroup-sensitive PA and thus provide useful information to help design group-sensitive, targeted interventions for disadvantaged PA subgroups. © 2011 by the American College of Sports Medicine

  19. Physical Environment Correlates of Physical Activity in Developing Countries: A Review.

    Science.gov (United States)

    Day, Kristen

    2018-04-01

    Noncommunicable diseases and obesity are considered problems of wealthy, developed countries. These conditions are rising dramatically in developing countries. Most existing research on the role of the physical environment to support physical activity examines developed countries only. This review identifies physical environment factors that are associated with physical activity in developing countries. This review is modeled on a highly cited review by Saelens and Handy in 2008. The current review analyzes findings from 159 empirical studies in the 138 developing countries. Results discuss the association of physical environment features and physical activity for all developing countries and identify the patterns within regions. The review supports the association of traffic safety with physical activity for transportation. Rural (vs urban) residence, distance to nonresidential land uses, and "composite" features of the physical environment are associated with general physical activity. Rural (vs urban) residence is associated with physical activity for work. More research is needed on associations between the physical environment and physical activity in developing countries. Research should identify specific physical environment features in urban areas that are associated with higher activity levels.

  20. One-single physical exercise session after object recognition learning promotes memory persistence through hippocampal noradrenergic mechanisms.

    Science.gov (United States)

    da Silva de Vargas, Liane; Neves, Ben-Hur Souto das; Roehrs, Rafael; Izquierdo, Iván; Mello-Carpes, Pâmela

    2017-06-30

    Previously we showed the involvement of the hippocampal noradrenergic system in the consolidation and persistence of object recognition (OR) memory. Here we show that one-single physical exercise session performed immediately after learning promotes OR memory persistence and increases norepinephrine levels in the hippocampus. Additionally, effects of exercise on memory are avoided by an intra-hippocampal beta-adrenergic antagonist infusion. Taken together, these results suggest that exercise effects on memory can be related to noradrenergic mechanisms and acute physical exercise can be a non-pharmacological intervention to assist memory consolidation and persistence, with few or no side effects. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. Effect of Weathering Time on the Physical - Mechanical Properties and Color Change in Wood Flour/HDPE Composite

    Directory of Open Access Journals (Sweden)

    Behzad Kord

    2014-05-01

    Full Text Available This study was carried out to investigate the effect of weathering time on the physical and mechanical properties and color change in composite made of wood flour and high density polyethylene (HDPE. For this purpose, wood flour and polyethylene at a weight ratio of 60:40 with coupling agent were compounded in an internal mixer, and the samples were made in injection molding. Then, the weathering process by ultraviolet irradiation and water spray was done on the samples at different times of 250, 500, 1000 and 2000 hours in accelerated weathering apparatus. Finally, the physical and mechanical properties and color measurement of samples were tested, and compared with control samples. Results indicated that the flexural strength, flexural modulus, tensile strength and tensile modulus decreased with an increase in weathering time; however, the water absorption increased. Also, the yellowness of wood plastic samples decreased with an increase in weathering time and due to the lightness and color change increased.

  2. Statistical mechanics of driven diffusive systems

    CERN Document Server

    Schmittmann, B

    1995-01-01

    Far-from-equilibrium phenomena, while abundant in nature, are not nearly as well understood as their equilibrium counterparts. On the theoretical side, progress is slowed by the lack of a simple framework, such as the Boltzmann-Gbbs paradigm in the case of equilibrium thermodynamics. On the experimental side, the enormous structural complexity of real systems poses serious obstacles to comprehension. Similar difficulties have been overcome in equilibrium statistical mechanics by focusing on model systems. Even if they seem too simplistic for known physical systems, models give us considerable insight, provided they capture the essential physics. They serve as important theoretical testing grounds where the relationship between the generic physical behavior and the key ingredients of a successful theory can be identified and understood in detail. Within the vast realm of non-equilibrium physics, driven diffusive systems form a subset with particularly interesting properties. As a prototype model for these syst...

  3. Physics-based scoring of protein-ligand interactions: explicit polarizability, quantum mechanics and free energies.

    Science.gov (United States)

    Bryce, Richard A

    2011-04-01

    The ability to accurately predict the interaction of a ligand with its receptor is a key limitation in computer-aided drug design approaches such as virtual screening and de novo design. In this article, we examine current strategies for a physics-based approach to scoring of protein-ligand affinity, as well as outlining recent developments in force fields and quantum chemical techniques. We also consider advances in the development and application of simulation-based free energy methods to study protein-ligand interactions. Fuelled by recent advances in computational algorithms and hardware, there is the opportunity for increased integration of physics-based scoring approaches at earlier stages in computationally guided drug discovery. Specifically, we envisage increased use of implicit solvent models and simulation-based scoring methods as tools for computing the affinities of large virtual ligand libraries. Approaches based on end point simulations and reference potentials allow the application of more advanced potential energy functions to prediction of protein-ligand binding affinities. Comprehensive evaluation of polarizable force fields and quantum mechanical (QM)/molecular mechanical and QM methods in scoring of protein-ligand interactions is required, particularly in their ability to address challenging targets such as metalloproteins and other proteins that make highly polar interactions. Finally, we anticipate increasingly quantitative free energy perturbation and thermodynamic integration methods that are practical for optimization of hits obtained from screened ligand libraries.

  4. Investigating and improving student understanding of the probability distributions for measuring physical observables in quantum mechanics

    International Nuclear Information System (INIS)

    Marshman, Emily; Singh, Chandralekha

    2017-01-01

    A solid grasp of the probability distributions for measuring physical observables is central to connecting the quantum formalism to measurements. However, students often struggle with the probability distributions of measurement outcomes for an observable and have difficulty expressing this concept in different representations. Here we first describe the difficulties that upper-level undergraduate and PhD students have with the probability distributions for measuring physical observables in quantum mechanics. We then discuss how student difficulties found in written surveys and individual interviews were used as a guide in the development of a quantum interactive learning tutorial (QuILT) to help students develop a good grasp of the probability distributions of measurement outcomes for physical observables. The QuILT strives to help students become proficient in expressing the probability distributions for the measurement of physical observables in Dirac notation and in the position representation and be able to convert from Dirac notation to position representation and vice versa. We describe the development and evaluation of the QuILT and findings about the effectiveness of the QuILT from in-class evaluations. (paper)

  5. Comments on microscopic mechanics, generalizations of classical mechanics and Planck's oscillators

    International Nuclear Information System (INIS)

    Yussouff, M.

    1983-05-01

    The new microscopic mechanics removes the dichotomy of physics into classical and quantum phenomena. Its physical picture and connections with generalizations of classical mechanics are discussed. It gives a new meaning to Bohr's frequency relation and Planck's oscillators. (author)

  6. A method for automated processing of measurement information during mechanical drilling

    Energy Technology Data Exchange (ETDEWEB)

    Samonenko, V.I.; Belinkov, V.G.; Romanova, L.A.

    1984-01-01

    An algorithm is cited for a developed method for automated processing of measurement information during mechanical drilling. Its use in conditions of operation of an automated control system (ASU) from drilling will make it possible to precisely identify a change in the lithology, the physical and mechanical and the abrasive properties, in the stratum (pore) pressure in the rock being drilled out during mechanical drilling, which along with other methods for testing the drilling process will increase the reliability of the decisions made.

  7. The physics of cancer

    CERN Document Server

    La Porta, Caterina A M

    2017-01-01

    Recent years have witnessed an increasing number of theoretical and experimental contributions to cancer research from different fields of physics, from biomechanics and soft-condensed matter physics to the statistical mechanics of complex systems. Reviewing these contributions and providing a sophisticated overview of the topic, this is the first book devoted to the emerging interdisciplinary field of cancer physics. Systematically integrating approaches from physics and biology, it includes topics such as cancer initiation and progression, metastasis, angiogenesis, cancer stem cells, tumor immunology, cancer cell mechanics and migration. Biological hallmarks of cancer are presented in an intuitive yet comprehensive way, providing graduate-level students and researchers in physics with a thorough introduction to this important subject. The impact of the physical mechanisms of cancer are explained through analytical and computational models, making this an essential reference for cancer biologists interested ...

  8. Effects of Static Magnetic Fields on the Physical, Mechanical, and Microstructural Properties of Cement Pastes

    OpenAIRE

    Soto-Bernal, Juan J.; Gonzalez-Mota, Rosario; Rosales-Candelas, Iliana; Ortiz-Lozano, Jose A.

    2015-01-01

    This paper presents the results of an experimental study carried out to comprehend the physical, mechanical, and microstructural behavior of cement pastes subjected to static magnetic fields while hydrating and setting. The experimental methodology consisted in exposing fresh cement pastes to static magnetic fields at three different magnetic induction strengths: 19.07, 22.22, and 25.37 Gauss. The microstructural characterization makes evident that there are differences in relation to amount ...

  9. Fractional quantum mechanics

    CERN Document Server

    Laskin, Nick

    2018-01-01

    Fractional quantum mechanics is a recently emerged and rapidly developing field of quantum physics. This is the first monograph on fundamentals and physical applications of fractional quantum mechanics, written by its founder. The fractional Schrödinger equation and the fractional path integral are new fundamental physical concepts introduced and elaborated in the book. The fractional Schrödinger equation is a manifestation of fractional quantum mechanics. The fractional path integral is a new mathematical tool based on integration over Lévy flights. The fractional path integral method enhances the well-known Feynman path integral framework. Related topics covered in the text include time fractional quantum mechanics, fractional statistical mechanics, fractional classical mechanics and the α-stable Lévy random process. The book is well-suited for theorists, pure and applied mathematicians, solid-state physicists, chemists, and others working with the Schrödinger equation, the path integral technique...

  10. Role of Pediatric Emergency Physicians in Identifying Bullying.

    Science.gov (United States)

    Waseem, Muhammad; Paul, Audrey; Schwartz, Gerald; Pauzé, Denis; Eakin, Paul; Barata, Isabel; Holtzman, Doug; Benjamin, Lee S; Wright, Joseph L; Nickerson, Amanda B; Joseph, Madeline

    2017-02-01

    Bullying is an important public health issue with broad implications. Although this issue has been studied extensively, there is limited emergency medicine literature addressing bullying. The emergency department (ED) physician has a unique opportunity to identify children and adolescents that are victims of bullying, and make a difference in their lives. Our aim is to discuss the role of the emergency physician (EP) in identifying patients who have been victims of bullying and how to provide effective management as well as referral for further resources. This document provides a framework for recognizing, stabilizing, and managing children who have experienced bullying. With the advent of social media, bullying behavior is not limited to in-person situations, and often occurs via electronic communication, further complicating recognition because it may not impart any physical harm to the child. Recognition of bullying requires a high level of suspicion, as patients may not offer this history. After the stabilization of any acute or overt indications of physical injury, along with obtaining a history of the mechanism of injury, the EP has the opportunity to identify the existence of bullying as the cause of the injury, and can address the issue in the ED while collaborating with "physician-extenders," such as social workers, toward identifying local resources for further support. The ED is an important arena for the assessment and management of children who have experienced bullying. It is imperative that EPs on the front lines of patient care address this public health epidemic. They have the opportunity to exert a positive impact on the lives of the children and families who are the victims of bullying. Copyright © 2016 Elsevier Inc. All rights reserved.

  11. Nanodiamond particles/PVDF nanocomposite flexible films: thermal, mechanical and physical properties

    Science.gov (United States)

    Jaleh, Babak; Sodagar, Shima; Momeni, Amir; Jabbari, Ameneh

    2016-08-01

    Recently, polymer nanocomposites reinforced with nanoparticles have attracted a lot of attention due to their unique physical and mechanical properties. In this work, poly (vinylidene fluoride)/nanodiamond particles nanocomposite films were prepared by solution casting method with various nanodiamond particles contents. The samples were investigated by Fourier transform infrared spectroscopy and x-ray diffraction technique. The results revealed an obvious α to β-phase transformation compared to pure PVDF. The most (or the maximum) phase transformation from α to β-phase (>90%) was found for nanocomposite film with 8% wt nanodiamond particles. Scanning electron micrographs showed considerable decrease in the size of spherulitic crystal structure of PVDF with adding nanoparticles. The photoluminescence property of nanocomposite films was investigated by photoluminescence spectroscopy and the optical band gap value was calculated from the UV-visible absorption spectra. The results showed that after the incorporation of nanoparticles into PVDF, the value of optical band gap decreased. Thermal stability of samples was studied by thermogravimetric analysis. Due to an increase in the electroactive phase (β) percentage by adding nanoparticles, the resistance of samples to thermal degradation improved. The mechanical properties of samples were investigated by tensile test and hardness measurements. The elastic modulus and hardness of samples were enhanced by adding nanodiamond particles and elongation to fracture decreased.

  12. Mechanical - physical treatment of used motor oil within a sustainable waste management system

    Directory of Open Access Journals (Sweden)

    Đukić Veljko N.

    2015-01-01

    Full Text Available Waste oils are all mineral or synthetic oils that cannot be used for the purpose for which they were originally produced. These are: hydraulic oils, motor oils, ship oils, liquids for the transfer of heat or insulation, oily remains from reservoirs, oil-water emulsions and various oil-water mixtures. In its chemical makeup used motor oil contains hydrocarbons, organic minerals, heavy metals (cobalt, magnesium, iron, zinc, sulfur, chlorine, nitrogen, phosphorus, compounds from additives and other products that are dangerous as they have cancerous effects on health. As it is considered the biggest contaminant of the environment and classified as hazardous waste; special attention must be given in the handling of used motor oil to ensure its appropriate disposal. Setting up of a viable system for Mechanical-Physical Treatment of used motor oil makes it possible to re-use it as a secondary raw material i.e. the problem of collection, transportation, treatment and storing of the used motor oil is being solved. . The subject of this research is the advantage of the mechanical-physical treatment of used motor oil. Re- refined motor oil can be used for multiple purposes such as a base for the other synthetic oils, for heating etc. Improper disposal of used motor oil causes multiple damage; firstly, losing the valuable secondary base which, with the addition of certain additives, can be used as the basis for the other synthetic oils; secondly, causing damage to the environment by the pollution with inability to repair the damage to all environmental components.

  13. High Energy Physics

    Science.gov (United States)

    Untitled Document [Argonne Logo] [DOE Logo] High Energy Physics Home Division ES&H Personnel Collider Physics Cosmic Frontier Cosmic Frontier Theory & Computing Detector R&D Electronic Design Mechanical Design Neutrino Physics Theoretical Physics Seminars HEP Division Seminar HEP Lunch Seminar HEP

  14. Mechanical design issues associated with mounting, maintenance, and handling of an ITER divertor

    International Nuclear Information System (INIS)

    Goranson, D.L.; Fogarty, D.J.; Jones, G.H.

    1992-01-01

    Several designs that address plasma-facing plate configurations and thermal-hydraulic design issues have been developed for the ITER divertor. Design criteria growing out of physics requirements, physical constraints, and remote handling requirements impose severe mechanical requirements on the support structure and its attachments. These pose a challenge to the mechanical design of a divertor, which must be addressed before a functional divertor is practical that is, one that can be remotely handled, aligned, and maintained; that functions reliably under thermal loading and disruptions; and that gives the required life in the nuclear environment predicted for ITER. This paper discusses the design criteria for the divertor mounting structure and identifies the mechanical design issues that need to be addressed

  15. Effect of Amount of 3-Methacryloxy Propyl Thrimethoxysilane Coupling Agent and Nano Filling Structure on Physic-Mechanical Properties of Dental Resin Composite

    Directory of Open Access Journals (Sweden)

    Farbod Tondnevis

    2017-07-01

    Full Text Available Many researchers in the field of dental polymeric base nano composite investigated the effect filling morphology and filling material content on mechanical and physical properties of construction after setting reaction. Our present study concentrated on the effect of ϒ metacryloxy propyloxt tri metoxy silane (ϒ MPS content as coupling agent (orgnic material on physical and mechanical performance of nano composite material. It was shown that despite of contraction after setting reaction, all this properties improved and efficient silanization can efficiently affect structural integrity of dental filling nano composite

  16. Physical activity and bone: The importance of the various mechanical stimuli for bone mineral density. A review

    Directory of Open Access Journals (Sweden)

    Bente Morseth

    2011-08-01

    Full Text Available Numerous studies have reported benefits of regular physical activity on bone mineral density (BMD. The effects of physical activity on BMD are primarily linked to the mechanisms of mechanical loading, but the understanding of the precise mechanism behind the association is incomplete. The aim of this paper was to review the main findings concerning sources and types of mechanical stimuli in relation to BMD. Mechanical forces that act on bone are generated from impact with the ground (ground-reaction forces and from skeletal muscle contractions (muscle forces or muscle-joint forces, but the relative importance of these two sources has not been elucidated. Both muscle-joint forces and gravitational forces seem to be able to induce bone adaptation independently, and there may be differences in the importance of loading sources at different skeletal sites. The nature of the stimuli is affected by the type, intensity, frequency, and duration of the activity. The activity should be dynamic, not static, and the magnitude and rate of the stimuli should be high. In accordance with this, cross-sectional studies report highest BMD in athletes of high-impact activities such as dancing, soccer, volleyball, basketball, squash, speed skating, gymnastics, hockey, and step-aerobics. Endurance activities such as orienteering, skiing, and triathlon seem to be beneficial to a lesser degree, whereas low-impact activities such as swimming and cycling are associated with lower BMD than controls. Both the intensity and frequency of the activity should be varied and increased beyond the habitual level. Duration of the activity seems to be less important, and a few loading cycles seem to be sufficient.

  17. PHYSICAL AND MECHANICAL PROPERTIES OF BLACK WOOD (EBONY AS A CONSTRUCTION MATERIAL

    Directory of Open Access Journals (Sweden)

    Fengky Satria Yoresta

    2015-01-01

    Full Text Available This research is aimed to determine physical and mechanical properties of Ebony wood as a construction material. The physical and mechanical properties test is conducted based on ASTM D 143-94 code. The mean value of moisture content and specific gravity of Ebony wood is obtained 12,90% and 0,92 gr.cm-3 respectively. Meanwhile MOE, bending strength, compressive strength parallel to grain, shear strength, and tensile strength parallel to grain are 180.425,87 kg.cm-2; 1656,22 kg.cm-2; 861,55 kg.cm-2; 119,61 kg.cm-2; dan 2.319,03 kg.cm-2 respectively. Based on the test results, it can be concluded that Ebony wood is classified to Strength Class I due to PKKI 1961, so it can be recommended for use in heavy construction such as bridge and building structures   Penelitian ini bertujuan menentukan sifat fisis dan mekanis kayu  Ebony sebagai material konstruksi. Pengujian sifat fisis dan mekanis dilakukan berdasarkan standar ASTM D 143-94. -3Nilai kadar air rata-rata kayu Ebony diperoleh sebesar 12,90% dan berat jenis 0,92 gr.cm . Sementara nilai rata-rata MOE, kuat lentur, kuat tekan sejajar serat, kuat geser, dan kuat tarik -2 -2 -2sejajar serat berturut-turut adalah 180.425,87 kg.cm ; 1656,22 kg.cm ; 861,55 kg.cm ; -2 -2119,61 kg.cm ; dan 2.319,03 kg.cm . Berdasarkan hasil penelitian dapat disimpulkan bahwa kayu Ebony tergolong kelas kuat I menurut PKKI 1961, sehingga dapat direkomendasikan untuk digunakan pada konstruksi-konstruksi berat seperti jembatan dan struktur bangunan.   REFERENCES Aghayere A & Jason V. 2007. Structural Wood Design: A Practice-Oriented Approach Using the ASD Method. John Wiley & Sons, Inc., New Jersey Boen T. 2009. Constructing Seismic Resistant Masonry Houses in Indonesia. United Nation. Chauf KA. 2005. Karakteristik Mekanik Kayu Kamper sebagai Bahan Konstruksi. Majalah Ilmiah MEKTEK . Vol 7 : 41-47. Dolan JD. 2004. Timber Structures. Pp 628-669 in Wai FC & Eric ML (Eds Handbook of Structural Engineering – 2nd

  18. Imagery, intuition and imagination in quantum physics education

    Science.gov (United States)

    Stapleton, Andrew J.

    2018-03-01

    In response to the authors, I demonstrate how threshold concepts offer a means to both contextualise teaching and learning of quantum physics and help transform students into the culture of physics, and as a way to identify particularly troublesome concepts within quantum physics. By drawing parallels from my own doctoral research in another area of contemporary physics—special relativity—I highlight concepts that require an ontological change, namely a shift beyond the reality of everyday Newtonian experience such as time dilation and length contraction, as being troublesome concepts that can present barriers to learning with students often asking "is it real?". Similarly, the domain of quantum physics requires students to move beyond "common sense" perception as it brings into sharp focus the difference between what is experienced via the sense perceptions and the mental abstraction of phenomena. And it's this issue that highlights the important role imagery and creativity have both in quantum physics and in the evolution of physics more generally, and lies in stark contrast to the apparent mathematical focus and lack of opportunity for students to explore ontological issues evident in the authors' research. By reflecting on the authors' observations of a focus on mathematical formalisms and problem solving at the expense of alternative approaches, I explore the dialectic between Heisenberg's highly mathematical approach and Schrödinger's mechanical wave view of the atom, together with its conceptual imagery, at the heart of the evolution of quantum mechanics. In turn, I highlight the significance of imagery, imagination and intuition in quantum physics, together with the importance of adopting an epistemological pluralism—multiple ways of knowing and thinking—in physics education. Again drawing parallels with the authors' work and my own, I identify the role thought experiments have in both quantum physics education and in physics more generally. By

  19. Identifying Intraplate Mechanism by B-Value Calculations in the South of Java Island

    Science.gov (United States)

    Bagus Suananda Y., Ida; Aufa, Irfan; Harlianti, Ulvienin

    2018-03-01

    Java is the most populous island in Indonesia with 50 million people live there. This island geologically formed at the Eurasia plate margin by the subduction of the Australian oceanic crust. At the south part of Java, beside the occurrence of 2-plate convergence earthquake (interplate), there are also the activities of the intraplate earthquake. Research for distinguish this 2 different earthquake type is necessary for estimating the behavior of the earthquake that may occur. The aim of this research is to map the b-value in the south of Java using earthquake data from 1963 until 2008. The research area are divided into clusters based on the epicenter mapping results with magnitude more than 4 and three different depth (0-30 km, 30-60 km, 60-100 km). This location clustering indicate group of earthquakes occurred by the same structure or mechanism. On some cluster in the south of Java, b-value obtained are between 0.8 and 1.25. This range of b-value indicates the region was intraplate earthquake zone, with 0.72-1.2 b-value range is the indication of intraplate earthquake zone. The final validation is to determine the mechanism of a segment done by correlating the epicenter and b-value plot with the available structural geology data. Based on this research, we discover that the earthquakes occur in Java not only the interplate earthquake, the intraplate earthquake also occurred here. By identifying the mechanism of a segment in the south of Java, earthquake characterization that may occur can be done for developing the accurate earthquake disaster mitigation system.

  20. The Physics of Semiconductors

    Science.gov (United States)

    Brennan, Kevin F.

    1999-02-01

    Modern fabrication techniques have made it possible to produce semiconductor devices whose dimensions are so small that quantum mechanical effects dominate their behavior. This book describes the key elements of quantum mechanics, statistical mechanics, and solid-state physics that are necessary in understanding these modern semiconductor devices. The author begins with a review of elementary quantum mechanics, and then describes more advanced topics, such as multiple quantum wells. He then disusses equilibrium and nonequilibrium statistical mechanics. Following this introduction, he provides a thorough treatment of solid-state physics, covering electron motion in periodic potentials, electron-phonon interaction, and recombination processes. The final four chapters deal exclusively with real devices, such as semiconductor lasers, photodiodes, flat panel displays, and MOSFETs. The book contains many homework exercises and is suitable as a textbook for electrical engineering, materials science, or physics students taking courses in solid-state device physics. It will also be a valuable reference for practicing engineers in optoelectronics and related areas.

  1. Magnetic and physical-mechanical properties of polymer composites with soft magnetic fillers

    International Nuclear Information System (INIS)

    Usakova, M.; Usak, E.; Olah, V.; Rekosova, J.

    2013-01-01

    In this paper the influence of soft magnetic ferrite fillers on magnetic and physical-mechanical properties of the prepared composite samples based in natural rubber matrix was studied. The soft magnetic ferrite materials with the chemical composition Mn_0_._3_7Zn_0_._5_7Fe_2_._0_6O_4 and Ni_0_._3_3Zn_0_._6_7Fe_2O_4 were used as magnetic filler in various concentrations. Further, the effect of thermo-oxidative ageing on the prepared composite materials was investigated. Magneto-rheological elastomers are solid analogues to magneto-rheological fluids. These materials are considered as smart materials comprising of micro- or submicro-sized magnetic particles dispersed in non-magnetic matrix. (authors)

  2. Cluster analysis of spontaneous preterm birth phenotypes identifies potential associations among preterm birth mechanisms.

    Science.gov (United States)

    Esplin, M Sean; Manuck, Tracy A; Varner, Michael W; Christensen, Bryce; Biggio, Joseph; Bukowski, Radek; Parry, Samuel; Zhang, Heping; Huang, Hao; Andrews, William; Saade, George; Sadovsky, Yoel; Reddy, Uma M; Ilekis, John

    2015-09-01

    We sought to use an innovative tool that is based on common biologic pathways to identify specific phenotypes among women with spontaneous preterm birth (SPTB) to enhance investigators' ability to identify and to highlight common mechanisms and underlying genetic factors that are responsible for SPTB. We performed a secondary analysis of a prospective case-control multicenter study of SPTB. All cases delivered a preterm singleton at SPTB ≤34.0 weeks' gestation. Each woman was assessed for the presence of underlying SPTB causes. A hierarchic cluster analysis was used to identify groups of women with homogeneous phenotypic profiles. One of the phenotypic clusters was selected for candidate gene association analysis with the use of VEGAS software. One thousand twenty-eight women with SPTB were assigned phenotypes. Hierarchic clustering of the phenotypes revealed 5 major clusters. Cluster 1 (n = 445) was characterized by maternal stress; cluster 2 (n = 294) was characterized by premature membrane rupture; cluster 3 (n = 120) was characterized by familial factors, and cluster 4 (n = 63) was characterized by maternal comorbidities. Cluster 5 (n = 106) was multifactorial and characterized by infection (INF), decidual hemorrhage (DH), and placental dysfunction (PD). These 3 phenotypes were correlated highly by χ(2) analysis (PD and DH, P cluster 3 of SPTB. We identified 5 major clusters of SPTB based on a phenotype tool and hierarch clustering. There was significant correlation between several of the phenotypes. The INS gene was associated with familial factors that were underlying SPTB. Copyright © 2015 Elsevier Inc. All rights reserved.

  3. Cluster Analysis of an International Pressure Pain Threshold Database Identifies 4 Meaningful Subgroups of Adults With Mechanical Neck Pain

    DEFF Research Database (Denmark)

    Walton, David M; Kwok, Timothy S H; Mehta, Swati

    2017-01-01

    OBJECTIVE: To determine pressure pain detection threshold (PPDT) related phenotypes of individuals with mechanical neck pain that may be identifiable in clinical practice. METHODS: This report describes a secondary analysis of 5 independent, international mechanical neck pain databases of PPDT...... values taken at both a local and distal region (total N=1176). Minor systematic differences in mean PPDT values across cohorts necessitated z-transformation before analysis, and each cohort was split into male and female sexes. Latent profile analysis (LPA) using the k-means approach was undertaken...... to identify the most parsimonious set of PPDT-based phenotypes that were both statistically and clinically meaningful. RESULTS: LPA revealed 4 distinct clusters named according to PPDT levels at the local and distal zones: low-low PPDT (67%), mod-mod (25%), mod-high (4%), and high-high (4%). Secondary...

  4. Effect of boron compounds on physical, mechanical, and fire properties of injection molded wood plastic composites

    Science.gov (United States)

    Nadir Ayrilmis; Turgay Akbulut; Turker Dundar; Robert H. White; Fatih Mengeloglu; Zeki Candan; Umit Buyuksari; Erkan Avci

    2011-01-01

    Physical, mechanical, and fire properties of the injection-molded wood flour/polypropylene composites (WPCs) incorporated with different levels of boron compounds, borax/boric acid (BX/BA) (0.5:0.5 wt %) and zinc borate (ZB) (4, 8, or 12 wt %) were investigated. The effect of the coupling agent loading (2, 4, or 6 wt %), maleic anhydride-grafted PP (MAPP), on the...

  5. Conquering the Physics GRE

    Science.gov (United States)

    Kahn, Yoni; Anderson, Adam

    2018-03-01

    Preface; How to use this book; Resources; 1. Classical mechanics; 2. Electricity and magnetism; 3. Optics and waves; 4. Thermodynamics and statistical mechanics; 5. Quantum mechanics and atomic physics; 6. Special relativity; 7. Laboratory methods; 8. Specialized topics; 9. Special tips and tricks for the Physics GRE; Sample exams and solutions; References; Equation index; Subject index; Problems index.

  6. The magnetosphere in relativistic physics

    International Nuclear Information System (INIS)

    Zapffe, C.A.

    1982-01-01

    The present paper takes off from the author's earlier epistemological analysis and criticism of the Special Theory of Relativity, identifies the problem as lying in Einstein's choice of the inertial frame of Newtonian mechanics rather than the electromagnetic frame of the locally embedding Maxwellian field when discussing electrodynamics, then proposes this Maxwellian field of the magnetosphere as the specific rest frame proper to all experimentation of optical or electromagnetic sort conducted within its bounds. The result is shown to remove all paradoxes from relativistic physics. (author)

  7. High-PT Physics with Identified Particles

    Energy Technology Data Exchange (ETDEWEB)

    Fries, R.; Liu, W.

    2009-11-09

    The suppression of high-P{sub T} particles in heavy ion collisions was one of the key discoveries at the Relativistic Heavy Ion Collider. This is usually parameterized by the average rate of momentum-transfer squared to this particle, {cflx q}. Here we argue that measurements of identified particles at high P{sub T} can lead to complementary information about the medium. The leading particle of a jet can change its identity through interactions with the medium. Tracing such flavor conversions could allow us to constrain the mean free path. Here we review the basic concepts of flavor conversions and discuss applications to particle ratios and elliptic flow. We make a prediction that strangeness is enhanced at high P{sub T} at RHIC energies while its elliptic flow is suppressed.

  8. Nuclear and particle physics applications of the Bohm picture of quantum mechanics

    International Nuclear Information System (INIS)

    Miranda, A

    2009-01-01

    Aproximation methods for calculating individual particle/field motions in spacetime at the quantum level of accuracy (a key feature of the Bohm picture (BP) of quantum mechanics) are studied. This sharply illuminates not only the deep quantum structures underlying any observable quantum statistical laws of motion of particles and fields in spacetime, but also how the continuous merging of the so-called classical and quantal modes of description actually occurs, with no breaks anywhere. Modern textbook presentations of Quantum Theory are used throughout, but only to provide the necessary, already existing, tested formalisms and calculational techniques. New coherent insights, reinterpretations of old solutions and results, and new (in principle testable) quantitative and qualitative predictions can be obtained on the basis of the BP that complete the standard type of postdictions and predictions. Most of the dead wood still cluttering discussions on the meaning of Quantum Theory and the role of the BP is by-passed. We shall try to draw attention to the physics of this unfortunately hardly known novel formulation of Quantum Theory by giving additional illustrative examples inspired from the daily practices of contemporary Nuclear and Particle Physics, subjects that as yet have not been thoroughly reinterpreted within the BP. These fields of research offer excellent oppurtunities for explaining and illustrating the significance of time in quantum transitions, as well as the closely related features of quantum non-locality and quantum wholeness, as hard physical facts. We claim that in addition we can obtain a substantial gain in predictive powers of the underlying, all-encompassing, Quantum Theory.

  9. Wave Physics Oscillations - Solitons - Chaos

    CERN Document Server

    Nettel, Stephen

    2009-01-01

    This textbook is intended for those second year undergraduates in science and engineering who will later need an understanding of electromagnetic theory and quantum mechanics. The classical physics of oscillations and waves is developed at a more advanced level than has been customary for the second year, providing a basis for the quantum mechanics that follows. In this new edition the Green's function is explained, reinforcing the integration of quantum mechanics with classical physics. The text may also form the basis of an "introduction to theoretical physics" for physics majors. The concluding chapters give special attention to topics in current wave physics: nonlinear waves, solitons, and chaotic behavior.

  10. Mechanisms of change in psychotherapy for depression: An empirical update and evaluation of research aimed at identifying psychological mediators.

    Science.gov (United States)

    Lemmens, Lotte H J M; Müller, Viola N L S; Arntz, Arnoud; Huibers, Marcus J H

    2016-12-01

    We present a systematic empirical update and critical evaluation of the current status of research aimed at identifying a variety of psychological mediators in various forms of psychotherapy for depression. We summarize study characteristics and results of 35 relevant studies, and discuss the extent to which these studies meet several important requirements for mechanism research. Our review indicates that in spite of increased attention for the topic, advances in theoretical consensus about necessities for mechanism research, and sophistication of study designs, research in this field is still heterogeneous and unsatisfactory in methodological respect. Probably the biggest challenge in the field is demonstrating the causal relation between change in the mediator and change in depressive symptoms. The field would benefit from a further refinement of research methods to identify processes of therapeutic change. Recommendations for future research are discussed. However, even in the most optimal research designs, explaining psychotherapeutic change remains a challenge. Psychotherapy is a multi-dimensional phenomenon that might work through interplay of multiple mechanisms at several levels. As a result, it might be too complex to be explained in relatively simple causal models of psychological change. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. Sustaining Physics Teacher Education Coalition Programs in Physics Teacher Education

    Science.gov (United States)

    Scherr, Rachel E.; Plisch, Monica; Goertzen, Renee Michelle

    2017-01-01

    Understanding the mechanisms of increasing the number of physics teachers educated per year at institutions with thriving physics teacher preparation programs may inspire and support other institutions in building thriving programs of their own. The Physics Teacher Education Coalition (PhysTEC), led by the American Physical Society (APS) and the…

  12. Physical activity and quality of life of amputees in southern Brazil.

    Science.gov (United States)

    da Silva, Rudney; Rizzo, Julia Ghazel; Gutierres Filho, Paulo José Barbosa; Ramos, Valmor; Deans, Sarah

    2011-12-01

    Physical activity is a positive component of human health. Its effects are associated with improvement in physical, psychological and social aspects of quality of life. Physical activity is therefore an important factor in the rehabilitation of amputees. To analyse the relationship between physical activity and quality of life for amputees in southern Brazil. Descriptive, cross-sectional design with nonrandomized sample. A total of 40 questionnaire instruments were distributed to subjects who met the inclusion criteria, with a response rate of 55% (22 individuals, n = 15 males, n = 7 females). Outcome measurements were obtained through the International Physical Activity Questionnaire and World Health Organization Quality of Life-Bref. The sample was characterized by physically active adult male prosthetic users with positive quality of life, and amputation below the right knee caused by mechanical trauma related to traffic accidents with motorcycles. Significant correlations were identified between all domains of quality of life and between level of physical activity and psychological quality of life. No correlation was identified between gender and quality of life variables or physical activity levels. This study showed that in very active amputees of both genders, level of physical activity is not associated with quality of life except for the psychological domain.

  13. Applications of quantum mechanical techniques to areas outside of quantum mechanics

    CERN Document Server

    Khrennikov, Andrei

    2018-01-01

    This book deals with applications of quantum mechanical techniques to areas outside of quantum mechanics, so-called quantum-like modeling. Research in this area has grown over the last 15 years. But even already more than 50 years ago, the interaction between Physics Nobelist Pauli and the psychologist Carl Jung in the 1950's on seeking to find analogous uses of the complementarity principle from quantum mechanics in psychology needs noting. This book does NOT want to advance that society is quantum mechanical! The macroscopic world is manifestly not quantum mechanical. But this rules not out that one can use concepts and the mathematical apparatus from quantum physics in a macroscopic environment. A mainstay ingredient of quantum mechanics, is 'quantum probability' and this tool has been proven to be useful in the mathematical modelling of decision making. In the most basic experiment of quantum physics, the double slit experiment, it is known (from the works of A. Khrennikov) that the law of total probabi...

  14. Central sensitization does not identify patients with carpal tunnel syndrome who are likely to achieve short-term success with physical therapy.

    Science.gov (United States)

    Fernández-de-Las-Peñas, César; Cleland, Joshua A; Ortega-Santiago, Ricardo; de-la-Llave-Rincon, Ana Isabel; Martínez-Perez, Almudena; Pareja, Juan A

    2010-11-01

    The aim of the current study was to identify whether hyperexcitability of the central nervous system is a prognostic factor for individuals with carpal tunnel syndrome (CTS) likely to experience rapid and clinical self-reported improvement following a physical therapy program including soft tissue mobilization and nerve slider neurodynamic interventions. Women presenting with clinical and electrophysiological findings of CTS were involved in a prospective single-arm trial. Participants underwent a standardized examination and then a physical therapy session. The physical therapy sessions included both soft tissue mobilization directed at the anatomical sites of potential median nerve entrapment and a passive nerve slider neurodynamic technique targeted to the median nerve. Pressure pain thresholds (PPT) over the median, radial and ulnar nerves, C5-C6 zygapophyseal joint, carpal tunnel and tibialis anterior muscle were assessed bilaterally. Additionally, thermal detection and pain thresholds were measured over the carpal tunnel and thenar eminence bilaterally to evaluate central nervous system excitability. Subjects were classified as responders (having achieved a successful outcome) or non-responders based on self-perceived recovery. Variables were entered into a stepwise logistic regression model to determine the most accurate variables for determining prognosis. Data from 72 women were included in the analysis, of which 35 experienced a successful outcome (48.6%). Three variables including PPT over the C5-C6 joint affected side 66 points were identified. If 2 out of 3 variables were present (LR + 14.8), the likelihood of success increased from 48.6 to 93.3%. We identified 3 factors that may be associated with a rapid clinical response to both soft tissue mobilization and nerve slider neurodynamic techniques targeted to the median nerve in women presenting with CTS. Our results support that widespread central sensitization may not be present in women with CTS who

  15. Physical and mechanical properties of cast 17-4 PH stainless steel

    International Nuclear Information System (INIS)

    Rack, H.J.

    1981-02-01

    The physical and mechanical properties of an overaged 17-4 PH stainless steel casting have been examined. The tensile and compressive properties of cast 17-4 PH are only influenced to a slight degree by changing test temperature and strain rate. However, both the Charpy impact energy and dynamic fracture toughness exhibit a tough-to-brittle transition with decreasing temperature - this transition being related to a change in fracture mode from ductile, dimple to cleavage-like. Finally, although the overaged 17-4 PH casting had a relatively low room temperature Charpy impact energy when compared to wrought 17-4 PH, its fracture toughness was at least comparable to that of wrought 17-4 PH. This observation suggests that prior correlations between Charpy impact energies and fracture toughness, as derived from wrought materials, must be approached with caution when applied to cast alloys

  16. Industrial metrology as applied to large physics experiments

    International Nuclear Information System (INIS)

    Veal, D.

    1993-05-01

    A physics experiment is a large complex 3-D object (typ. 1200 m 3 , 35000 tonnes), with sub-millimetric alignment requirements. Two generic survey alignment tasks can be identified; first, an iterative positioning of the apparatus subsystems in space and, second, a quantification of as-built parameters. The most convenient measurement technique is industrial triangulation but the complexity of the measured object and measurement environment constraints frequently requires a more sophisticated approach. To enlarge the ''survey alignment toolbox'' measurement techniques commonly associated with other disciplines such as geodesy, applied geodesy for accelerator alignment, and mechanical engineering are also used. Disparate observables require a heavy reliance on least squares programs for campaign pre-analysis and calculation. This paper will offer an introduction to the alignment of physics experiments and will identify trends for the next generation of SSC experiments

  17. Industrial metrology as applied to large physics experiments

    Energy Technology Data Exchange (ETDEWEB)

    Veal, D.

    1993-05-01

    A physics experiment is a large complex 3-D object (typ. 1200 m{sup 3}, 35000 tonnes), with sub-millimetric alignment requirements. Two generic survey alignment tasks can be identified; first, an iterative positioning of the apparatus subsystems in space and, second, a quantification of as-built parameters. The most convenient measurement technique is industrial triangulation but the complexity of the measured object and measurement environment constraints frequently requires a more sophisticated approach. To enlarge the ``survey alignment toolbox`` measurement techniques commonly associated with other disciplines such as geodesy, applied geodesy for accelerator alignment, and mechanical engineering are also used. Disparate observables require a heavy reliance on least squares programs for campaign pre-analysis and calculation. This paper will offer an introduction to the alignment of physics experiments and will identify trends for the next generation of SSC experiments.

  18. Antimicrobial and physical-mechanical properties of agar-based films incorporated with grapefruit seed extract.

    Science.gov (United States)

    Kanmani, Paulraj; Rhim, Jong-Whan

    2014-02-15

    The use of synthetic petroleum based packaging films caused serious environmental problems due to their difficulty in recycling and poor biodegradability. Therefore, present study was aimed to develop natural biopolymer-based antimicrobial packaging films as an alternative for the synthetic packaging films. As a natural antimicrobial agent, grapefruit seed extract (GSE) has been incorporated into agar to prepare antimicrobial packaging film. The films with different concentrations of GSE were prepared by a solvent casting method and the resulting composite films were examined physically and mechanically. In addition, the films were characterized by FE-SEM, XRD, FT-IR and TGA. The incorporation of GSE caused increase in color, UV barrier, moisture content, water solubility and water vapor permeability, while decrease in surface hydrophobicity, tensile strength and elastic modulus of the films. As the concentration of GSE increased from 0.6 to 13.3 μg/mL, the physical and mechanical properties of the films were affected significantly. The addition of GSE changed film microstructure of the film, but did not influence the crystallinity of agar and thermal stability of the agar-based films. The agar/GSE films exhibited distinctive antimicrobial activity against three test food pathogens, such as Listeria monocytogenes, Bacillus cereus and Escherichia coli. These results suggest that agar/GSE films have potential to be used in an active food packaging systems for maintaining food safety and extending the shelf-life of the packaged food. Copyright © 2013 Elsevier Ltd. All rights reserved.

  19. Revisiting of Channel Access Mechanisms in Mobile Wireless Networks through Exploiting Physical Layer Technologies

    Directory of Open Access Journals (Sweden)

    Junmei Yao

    2018-01-01

    Full Text Available The wireless local area networks (WLANs have been widely deployed with the rapid development of mobile devices and have further been brought into new applications with infrastructure mobility due to the growth of unmanned aerial vehicles (UAVs. However, the WLANs still face persistent challenge on increasing the network throughput to meet the customer’s requirement and fight against the node mobility. Interference is a well-known issue that would degrade the network performance due to the broadcast characteristics of the wireless signals. Moreover, with infrastructure mobility, the interference becomes the key obstacle in pursuing the channel capacity. Legacy interference management mechanism through the channel access control in the MAC layer design of the 802.11 standard has some well-known drawbacks, such as exposed and hidden terminal problems, inefficient rate adaptation, and retransmission schemes, making the efficient interference management an everlasting research topic over the years. Recently, interference management through exploiting physical layer mechanisms has attracted much research interest and has been proven to be a promising way to improve the network throughput, especially under the infrastructure mobility scenarios which provides more indicators for node dynamics. In this paper, we introduce a series of representative physical layer techniques and analyze how they are exploited for interference management to improve the network performance. We also provide some discussions about the research challenges and give potential future research topics in this area.

  20. Effects of current physical activity on affective response to exercise: physical and social-cognitive mechanisms.

    Science.gov (United States)

    Magnan, Renee E; Kwan, Bethany M; Bryan, Angela D

    2013-01-01

    Affective responses during exercise are often important determinants of exercise initiation and maintenance. Current physical activity may be one individual difference that is associated with the degree to which individuals have positive (or negative) affective experiences during exercise. The objective of this study was to explore physical and cognitive explanations of the relationship between current activity status (more versus less active) and affective response during a 30-minute bout of moderate-intensity exercise. Participants reported their current level of physical activity, exercise self-efficacy and affect during a 30-minute bout of moderate-intensity exercise. More active individuals experienced higher levels of positive affect and tranquillity and lower levels of negative affect and fatigue during exercise. Multivariate models for each affective state indicated separate processes through which physical activity may be associated with changes in affect during exercise. These models indicate that affect experienced during physical activity is related to the current activity level and these relationships can be partially explained by the physical and cognitive factors explored in this study. Recommendations for future research to elucidate whether positive affective response to physical activity improves as a function of becoming more active over time are discussed.

  1. Sustaining Physics Teacher Education Coalition programs in physics teacher education

    OpenAIRE

    Rachel E. Scherr; Monica Plisch; Renee Michelle Goertzen

    2017-01-01

    Understanding the mechanisms of increasing the number of physics teachers educated per year at institutions with thriving physics teacher preparation programs may inspire and support other institutions in building thriving programs of their own. The Physics Teacher Education Coalition (PhysTEC), led by the American Physical Society (APS) and the American Association of Physics Teachers (AAPT), has supported transformation of physics teacher preparation programs at a number of institutions aro...

  2. From classical physics to quantum physics. An historically-critical deductive derivation with application examples from solid-state physics

    International Nuclear Information System (INIS)

    Enders, P.

    2006-01-01

    This book goes a novel way from classical physics to quantum physics. After the description of Euler's and Helmholtz's representations of classical mechanics the Schroedinger equation is derivated without making any additional assumptions about the nature of quantum mechanical systems. Thereby not the differences between but the common properties of classical and quantum mechanics are accentuated and four fundamental problems of the quantization named by Schroedinger are solved. Extensively to the historical literature is related. This book applies not only to students and scientists but also to teachers and historians of natural sciences: It contains many details which enter no more into modern presentations of classical mechanics, but are important for the understanding of quantum mechanics [de

  3. The philosophy of physics

    CERN Document Server

    Rickles, Dean

    2016-01-01

    Does the future exist already? What is space? Are time machines physically possible? What is quantum mechanical reality like? Are there many universes? Is there a 'true' geometry of the universe? Why does there appear to be an arrow of time? Do humans play a special role in the world? In this unique introductory book, Dean Rickles guides the reader through these and other core questions that keep philosophers of physics up at night. He discusses the three pillars of modern physics (quantum mechanics, statistical mechanics, and the theories of relativity), in addition to more cutting-edge themes such as econophysics, quantum gravity, quantum computers, and gauge theories. The book's approach is based on the idea that philosophy of physics is a kind of 'interpretation game' in which we try to map physical theories onto our world. But the rules of this game often lead to a multiplicity of possible victors: rarely do we encounter a simple answer. The Philosophy of Physics offers a highly accessible introduction...

  4. The strength study of the rotating device driver indexing spatial mechanism

    Science.gov (United States)

    Zakharenkov, N. V.; Kvasov, I. N.

    2018-04-01

    The indexing spatial mechanisms are widely used in automatic machines. The mechanisms maximum load-bearing capacity measurement is possible based on both the physical and numerical models tests results. The paper deals with the driven disk indexing spatial cam mechanism numerical model at the constant angular cam velocity. The presented mechanism kinematics and geometry parameters and finite element model are analyzed in the SolidWorks design environment. The calculation initial data and missing parameters having been found from the structure analysis were identified. The structure and kinematics analysis revealed the mechanism failures possible reasons. The numerical calculations results showing the structure performance at the contact and bending stresses are represented.

  5. New perspectives on mechanisms of sound generation in songbirds

    DEFF Research Database (Denmark)

    Goller, Franz; Larsen, Ole Næsbye

    2002-01-01

    -tone mechanism similar to human phonation with the labia forming a pneumatic valve. The classical avian model proposed that vibrations of the thin medial tympaniform membranes are the primary sound generating mechanism. As a direct test of these two hypotheses we ablated the medial tympaniform membranes in two......The physical mechanisms of sound generation in the vocal organ, the syrinx, of songbirds have been investigated mostly with indirect methods. Recent direct endoscopic observation identified vibrations of the labia as the principal sound source. This model suggests sound generation in a pulse...... atmosphere) as well as direct (labial vibration during tonal sound) measurements of syringeal vibrations support a vibration-based soundgenerating mechanism even for tonal sounds....

  6. The Physical Mechanism of Frictional Aging Revealed by Nanoindentation Creep

    Science.gov (United States)

    Thom, C.; Carpick, R. W.; Goldsby, D. L.

    2017-12-01

    A classical observation from rock friction experiments is that friction increases linearly with the logarithm of the time of stationary contact, a phenomenon sometimes referred to as aging. Aging is most often attributed to an increase in the real area of contact due to asperity creep. However, recent atomic force microscopy (AFM) experiments and molecular dynamics simulations suggest that time-dependent siloxane (Si—O—Si) bonding gives rise to aging in silica-silica contacts in the absence of plastic deformation. Determining whether an increase in contact `quantity' (due to creep), contact `quality' (due to chemical bonding), or another unknown mechanism causes aging is a challenging experimental task, despite its importance for developing a physical basis for rate and state friction laws. An intriguing observation is that aging is absent in friction experiments on quartz rocks and gouge at humidities water on asperity creep (via hydrolytic weakening) or on the adhesive strength of contacts. To discern between these possibilities, we have conducted nanoindentation experiments on single crystals of quartz to measure their indentation hardness and creep behavior at humidities of 2% to 50%, and in vacuum. Samples were loaded at 1000 mN/s to a peak load of 15, 40, or 400 mN, which was then held constant for 10 s. After the peak load is reached, the tip sinks into the material with time due to creep of the indentation contact. Our experiments reveal that there is no effect of varying humidity on either indentation hardness or indentation creep behavior over the full range of humidities investigated. If asperity creep were the dominant mechanism of frictional aging for quartz in the experiments cited above, then significant increases in hardness and decreases in the growth rate of indentation contacts at low humidities is expected, in stark contrast with our nanoindentation data. Our experiments indicate that asperity creep cannot be the cause of aging in quartz

  7. The physics companion

    CERN Document Server

    Fischer-Cripps, Anthony C

    2014-01-01

    Updated and expanded with new topics, The Physics Companion, 2nd Edition offers a unique and educational approach to learning physics at a level suitable for first-year science students. This new edition expands the presentation to include senior topics, such as statistical mechanics, quantum physics, and nuclear physics.

  8. A methodology for identification and control of electro-mechanical actuators.

    Science.gov (United States)

    Tutunji, Tarek A; Saleem, Ashraf

    2015-01-01

    Mechatronic systems are fully-integrated engineering systems that are composed of mechanical, electronic, and computer control sub-systems. These integrated systems use electro-mechanical actuators to cause the required motion. Therefore, the design of appropriate controllers for these actuators are an essential step in mechatronic system design. In this paper, a three-stage methodology for real-time identification and control of electro-mechanical actuator plants is presented, tested, and validated. First, identification models are constructed from experimental data to approximate the plants' response. Second, the identified model is used in a simulation environment for the purpose of designing a suitable controller. Finally, the designed controller is applied and tested on the real plant through Hardware-in-the-Loop (HIL) environment. The described three-stage methodology provides the following practical contributions: •Establishes an easy-to-follow methodology for controller design of electro-mechanical actuators.•Combines off-line and on-line controller design for practical performance.•Modifies the HIL concept by using physical plants with computer control (rather than virtual plants with physical controllers). Simulated and experimental results for two case studies, induction motor and vehicle drive system, are presented in order to validate the proposed methodology. These results showed that electromechanical actuators can be identified and controlled using an easy-to-duplicate and flexible procedure.

  9. Physical fracture properties (fracture surfaces as information sources; crackgrowth and fracture mechanisms; exemples of cracks)

    International Nuclear Information System (INIS)

    Meny, Lucienne.

    1979-06-01

    Fracture surfaces are considered as a useful source of informations: an introduction to fractography is presented; the fracture surface may be observed through X ray microanalysis, and other physical methods such as Auger electron spectroscopy or secundary ion emission. The mechanisms of macroscopic and microscopic crackgrowth and fracture are described, in the case of unstable fracture (cleavage, ductile with shear, intergranular brittleness) and of progressive crack propagation (creep, fatigue). Exemples of cracks are presented in the last chapter [fr

  10. Physical, mechanical and thermal properties of Crushed Sand Concrete containing Rubber Waste

    Directory of Open Access Journals (Sweden)

    Mohamed Guendouz

    2018-01-01

    Full Text Available Over the past twenty years, the rubber wastes are an important part of municipal solid waste. This work focuses on the recycling of rubber waste, specifically rubber waste of used shoes discharged into the nature and added in the mass of crushed sand concrete with percentage (10%, 20%, 30% and 40%. The physical (workability, fresh density, mechanical (compressive and flexural strength and thermal (thermal conductivity of different crushed sand concrete made are analyzed and compared to the respective controls. The use of rubber waste in crushed sand concrete contributes to reduce the bulk density and performance of sand concrete. Nevertheless, the use of rubber aggregate leads to a significant reduction in thermal conductivity, which improves the thermal insulation of crushed sand concrete.

  11. Manufacturing of wollastonite-based glass from cement dust: Physical and mechanical properties

    Directory of Open Access Journals (Sweden)

    A.A. Francis

    2016-12-01

    Full Text Available By-pass cement dust is considered as a source of environmental pollution. Wollastonite-based glass foams are made by adding glass waste and SiC to the cement dust. XRD on samples indicated that the main crystalline phase after heat treatment at 850–1,000°C is wollastonite. Empirical models were developed to derive conclusion on the impact of SiC and temperature on the physical and mechanical properties of the products. The optimum sintering temperature was found to be at 900°C for 60 min, at which crushing strength was about 15 MPa and was the best uniform. Such wollastonite-based glass foam could be very attractive for thermal and acoustic applications.

  12. Raman spectroscopy applied to identify metabolites in urine of physically active subjects.

    Science.gov (United States)

    Moreira, Letícia Parada; Silveira, Landulfo; da Silva, Alexandre Galvão; Fernandes, Adriana Barrinha; Pacheco, Marcos Tadeu Tavares; Rocco, Débora Dias Ferraretto Moura

    2017-11-01

    Raman spectroscopy is a rapid and non-destructive technique suitable for biological fluids analysis. In this work, dispersive Raman spectroscopy has been employed as a rapid and nondestructive technique to detect the metabolites in urine of physically active subjects before and after vigorous 30min pedaling or running compared to sedentary subjects. For so, urine samples from 9 subjects were obtained before and immediately after physical activities and submitted to Raman spectroscopy (830nm excitation, 250mW laser power, 20s integration time) and compared to urine from 5 sedentary subjects. The Raman spectra of urine from sedentary showed peaks related to urea, creatinine, ketone bodies, phosphate and other nitrogenous compounds. These metabolic biomarkers presented peaks with different intensities in the urine of physically active individuals after exercises compared to before, measured by the intensity of selected peaks the Raman spectra, which means different concentrations after training. These peaks presented different intensity values for each subject before physical activity, also behaving differently compared to the post-training: some subjects presented increase while others decrease the intensity. Raman spectroscopy may allow the development of a rapid and non-destructive test for metabolic evaluation of the physical training in active and trained subjects using urine samples, allowing nutrition adjustment with the sport's performance. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Possible Mechanisms Explaining the Association Between Physical Activity and Mental Health. Findings From the 2001 Dutch Health Behaviour in School-Aged Children Survey

    NARCIS (Netherlands)

    Monshouwer, K.; ten Have, M.; van Poppel, M.N.M.; Kemper, H.C.G.; Vollebergh, W.A.M.

    2013-01-01

    More physical activity is associated with fewer mental health problems among adolescents, but the underlying mechanisms are not clear. The aim of this article is to investigate whether the association between physical activity and mental health is mediated by body-weight perception (self-image) or

  14. The use of sports images in Mechanics teaching: an analysis on physics textbooks

    Directory of Open Access Journals (Sweden)

    Luiz Marcelo Darroz

    2017-12-01

    Full Text Available This article presents the results of a research performed in the first volumes of the 14 Physics textbooks recommended by the Brazilian Textbook Program (PNLD – 2015, which aimed to analyze how sports images are addressed in Mechanics concepts. Categories created by Perales and Jiménez (2002 were used as analysis criteria and allowed understanding the characteristics of the images presented in the textbooks. Therefore, the results showed that although sports images are present in these books, the adoption of methods is required so this didactic tool is used efficiently, thus promoting the construction of the knowledge intended to be taught.

  15. Quantum mechanics and Bell's inequalities

    International Nuclear Information System (INIS)

    Jones, R.T.; Adelberger, E.G.

    1994-01-01

    Santos argues that, if one interprets probabilities as ratios of detected events to copies of the physical system initially prepared, the quantum mechanical predictions for the classic tests of Bell's inequalities do not violate the inequalities. Furthermore, he suggests that quantum mechanical states which do violate the inequalities are not physically realizable. We discuss a physically realizable experiment, meeting his requirements, where quantum mechanics does violate the inequalities

  16. Physical activity, sedentary behavior, and vitamin D metabolites.

    Science.gov (United States)

    Hibler, Elizabeth A; Sardo Molmenti, Christine L; Dai, Qi; Kohler, Lindsay N; Warren Anderson, Shaneda; Jurutka, Peter W; Jacobs, Elizabeth T

    2016-02-01

    Physical activity is associated with circulating 25-hydroxyvitamin D (25(OH)D). However, the influence of activity and/or sedentary behavior on the biologically active, seco-steroid hormone 1α,25-dihydroxyvitamin D (1,25(OH)2D) is unknown. We conducted a cross-sectional analysis among ursodeoxycholic acid (UDCA) randomized trial participants (n=876) to evaluate associations between physical activity, sedentary behavior, and circulating vitamin D metabolite concentrations. Continuous vitamin D metabolite measurements and clinical thresholds were evaluated using multiple linear and logistic regression models, mutually adjusted for either 1,25(OH)2D or 25(OH)D and additional confounding factors. A statistically significant linear association between 1,25(OH)2D and moderate-vigorous physical activity per week was strongest among women (β (95% CI): 3.10 (1.51-6.35)) versus men (β (95% CI): 1.35 (0.79-2.29)) in the highest tertile of activity compared to the lowest (p-interaction=0.003). Furthermore, 25(OH)D was 1.54ng/ml (95% CI 1.09-1.98) higher per hour increase in moderate-vigorous activity (p=0.001) and odds of sufficient 25(OH)D status was higher among physically active participants (p=0.001). Sedentary behavior was not significantly associated with either metabolite in linear regression models, nor was a statistically significant interaction by sex identified. The current study identified novel associations between physical activity and serum 1,25(OH)2D levels, adjusted for 25(OH)D concentrations. These results identify the biologically active form of vitamin D as a potential physiologic mechanism related to observed population-level associations between moderate-vigorous physical activity with bone health and chronic disease risk. However, future longitudinal studies are needed to further evaluate the role of physical activity and vitamin D metabolites in chronic disease prevention. Copyright © 2015 Elsevier Inc. All rights reserved.

  17. The physical metallurgy of mechanically-alloyed, dispersion-strengthened Al-Li-Mg and Al-Li-Cu alloys

    Science.gov (United States)

    Gilman, P. S.

    1984-01-01

    Powder processing of Al-Li-Mg and Al-Li-Cu alloys by mechanical alloying (MA) is described, with a discussion of physical and mechanical properties of early experimental alloys of these compositions. The experimental samples were mechanically alloyed in a Szegvari attritor, extruded at 343 and 427 C, and some were solution-treated at 520 and 566 C and naturally, as well as artificially, aged at 170, 190, and 210 C for times of up to 1000 hours. All alloys exhibited maximum hardness after being aged at 170 C; lower hardness corresponds to the solution treatment at 566 C than to that at 520 C. A comparison with ingot metallurgy alloys of the same composition shows the MA material to be stronger and more ductile. It is also noted that properly aged MA alloys can develop a better combination of yield strength and notched toughness at lower alloying levels.

  18. THREE-DIMENSIONAL WEB-BASED PHYSICS SIMULATION APPLICATION FOR PHYSICS LEARNING TOOL

    Directory of Open Access Journals (Sweden)

    William Salim

    2012-10-01

    Full Text Available The purpose of this research is to present a multimedia application for doing simulation in Physics. The application is a web based simulator that implementing HTML5, WebGL, and JavaScript. The objects and the environment will be in three dimensional views. This application is hoped will become the substitute for practicum activity. The current development is the application only covers Newtonian mechanics. Questionnaire and literature study is used as the data collecting method. While Waterfall Method used as the design method. The result is Three-DimensionalPhysics Simulator as online web application. Three-Dimensionaldesign and mentor-mentee relationship is the key features of this application. The conclusion made is Three-DimensionalPhysics Simulator already fulfilled in both design and functionality according to user. This application also helps them to understand Newtonian mechanics by simulation. Improvements are needed, because this application only covers Newtonian Mechanics. There is a lot possibility in the future that this simulation can also covers other Physics topic, such as optic, energy, or electricity.Keywords: Simulation, Physic, Learning Tool, HTML5, WebGL

  19. Modern introductory physics

    CERN Document Server

    Holbrow, Charles H; Amato, Joseph C; Galvez, Enrique; Parks, M. Elizabeth

    2010-01-01

    Modern Introductory Physics, 2nd Edition, by Charles H. Holbrow, James N. Lloyd, Joseph C. Amato, Enrique Galvez, and Beth Parks, is a successful innovative text for teaching introductory college and university physics. It is thematically organized to emphasize the physics that answers the fundamental question: Why do we believe in atoms and their properties?  The book provides a sound introduction to basic physical concepts with particular attention to the nineteenth- and twentieth-century physics underlying our modern ideas of atoms and their structure.  After a review of basic Newtonian mechanics, the book discusses early physical evidence that matter is made of atoms.  With a simple model of the atom Newtonian mechanics can explain the ideal gas laws, temperature, and viscosity.  Basic concepts of electricity and magnetism are introduced along with a more complicated model of the atom to account for the observed electrical properties of atoms. The physics of waves---particularly light and x-rays---an...

  20. Returning to the bedside: using the history and physical examination to identify rotator cuff tears.

    Science.gov (United States)

    Litaker, D; Pioro, M; El Bilbeisi, H; Brems, J

    2000-12-01

    To determine the value of elements of the bedside history and physical examination in predicting arthrography results in older patients with suspected rotator cuff tear (RCT). Retrospective chart review Orthopedic practice limited to disorders of the shoulder 448 consecutive patients with suspected RCT referred for arthrography over a 4-year period Presence of partial or complete RCT on arthrogram 301 patients (67.2%) had evidence of complete or partial RCT. Clinical findings in the univariate analysis most closely associated with rotator cuff tear included infra- and supraspinatus atrophy (P or = 65 (AOR 4.05(2.47, 16.07)), and night pain (AOR 2.61 (1.004, 7.39)) best predicted the presence of RCT. A five-point scoring system developed from this model was applied in the remaining patient sample (n = 216) to test validity. No significant differences in performance were noted using ROC curve comparison. Using likelihood ratios, a clinical score = 4 was superior in predicting RCT to the diagnostic prediction of an expert clinician. This score had specificity equivalent to magnetic resonance imaging or ultrasonography in diagnosis of RCT. The presence of three simple features in the history and physical examination of the shoulder can identify RCT efficiently. This approach offers a valuable strategy to diagnosis at the bedside without compromising sensitivity or specificity.

  1. Distributed Persistent Identifiers System Design

    Directory of Open Access Journals (Sweden)

    Pavel Golodoniuc

    2017-06-01

    Full Text Available The need to identify both digital and physical objects is ubiquitous in our society. Past and present persistent identifier (PID systems, of which there is a great variety in terms of technical and social implementation, have evolved with the advent of the Internet, which has allowed for globally unique and globally resolvable identifiers. PID systems have, by in large, catered for identifier uniqueness, integrity, and persistence, regardless of the identifier’s application domain. Trustworthiness of these systems has been measured by the criteria first defined by Bütikofer (2009 and further elaborated by Golodoniuc 'et al'. (2016 and Car 'et al'. (2017. Since many PID systems have been largely conceived and developed by a single organisation they faced challenges for widespread adoption and, most importantly, the ability to survive change of technology. We believe that a cause of PID systems that were once successful fading away is the centralisation of support infrastructure – both organisational and computing and data storage systems. In this paper, we propose a PID system design that implements the pillars of a trustworthy system – ensuring identifiers’ independence of any particular technology or organisation, implementation of core PID system functions, separation from data delivery, and enabling the system to adapt for future change. We propose decentralisation at all levels — persistent identifiers and information objects registration, resolution, and data delivery — using Distributed Hash Tables and traditional peer-to-peer networks with information replication and caching mechanisms, thus eliminating the need for a central PID data store. This will increase overall system fault tolerance thus ensuring its trustworthiness. We also discuss important aspects of the distributed system’s governance, such as the notion of the authoritative source and data integrity

  2. Photo-cross-linked PLA-PEO-PLA hydrogels from self-assembled physical networks: mechanical properties and influence of assumed constitutive relationships.

    Science.gov (United States)

    Sanabria-DeLong, Naomi; Crosby, Alfred J; Tew, Gregory N

    2008-10-01

    Poly(lactide)-block-poly(ethylene oxide)-block-poly(lactide) (PLA-PEO-PLA) triblock copolymers are known to form physical hydrogels in water as a result of the polymer's amphiphilicity. Their mechanical properties, biocompatibility, and biodegradability have made them attractive for use as soft tissue scaffolds. However, the network junction points are not covalently cross-linked, and in a highly aqueous environment these hydrogels adsorb more water, transform from gel to sol, and lose the designed mechanical properties. In this article, a hydrogel was formed by the use of a novel two-step approach. In the first step, the end-functionalized PLA-PEO-PLA triblock was self-assembled into a physical hydrogel through hydrophobic micelle network junctions, and in the second step, this self-assembled physical network structure was locked into place by photo-cross-linking the terminal acrylate groups. In contrast with physical hydrogels, the photo-cross-linked gels remained intact in phosphate-buffered solution at body temperature. The swelling, degradation, and mechanical properties were characterized, and they demonstrated an extended degradation time (approximately 65 days), an exponential decrease in modulus with degradation time, and a tunable shear modulus (1.6-133 kPa). We also discuss the various constitutive relationships (Hookean, neo-Hookean, and Mooney-Rivlin) that can be used to describe the stress-strain behavior of these hydrogels. The chosen model and assumptions used for data fitting influenced the obtained modulus values by as much as a factor of 3.5, which demonstrates the importance of clearly stating one's data fitting parameters so that accurate comparisons can be made within the literature.

  3. Physical and Mechanical Properties of LoVAR: A New Lightweight Particle-Reinforced Fe-36Ni Alloy

    Science.gov (United States)

    Stephenson, Timothy; Tricker, David; Tarrant, Andrew; Michel, Robert; Clune, Jason

    2015-01-01

    Fe-36Ni is an alloy of choice for low thermal expansion coefficient (CTE) for optical, instrument and electrical applications in particular where dimensional stability is critical. This paper outlines the development of a particle-reinforced Fe-36Ni alloy that offers reduced density and lower CTE compared to the matrix alloy. A summary of processing capability will be given relating the composition and microstructure to mechanical and physical properties.

  4. Nilpotent Quantum Mechanics: Analogs and Applications

    Directory of Open Access Journals (Sweden)

    Peter Marcer

    2017-07-01

    Full Text Available The most significant characteristic of nilpotent quantum mechanics is that the quantum system (fermion state and its environment (vacuum are, in mathematical terms, mirror images of each other. So a change in one automatically leads to corresponding changes in the other. We have used this characteristic as a model for self-organization, which has applications well beyond quantum physics. The nilpotent structure has also been identified as being constructed from two commutative vector spaces. This zero square-root construction has a number of identifiable characteristics which we can expect to find in systems where self-organization is dominant, and a case presented after the publication of a paper by us on “The ‘Logic’ of Self-Organizing Systems” [1], in the organization of the neurons in the visual cortex. We expect to find many more complex systems where our general principles, based, by analogy, on nilpotent quantum mechanics, will apply.

  5. Physical, chemical and mechanical properties of pehuen cellulosic husk and its pehuen-starch based composites.

    Science.gov (United States)

    Castaño, J; Rodríguez-Llamazares, S; Carrasco, C; Bouza, R

    2012-11-06

    Pehuen cellulosic husk was characterized and employed as reinforcement for composite materials. In this research, thermoplastic pehuen starch (TPS) and TPS/poly(lactic acid) (PLA)/polyvinyl alcohol (PVA) composites, reinforced with 5 and 10% of pehuen husk, were prepared by melt-blending. Comparative samples of pehuen TPS and TPS/PLA/PVA blend were also studied. Physical, thermal, structural and mechanical properties of composites were evaluated. Pehuen husk mainly consists of cellulose (50 wt%), hemicellulose (30 wt%) and lignin (14 wt%). In respect to lipids, this husk has only a 0.6 wt%. Its surface is smooth and damage-free and it is decomposed above 325 °C. The incorporation of pehuen husk improved considerably the thermal stability and mechanical properties of the studied composites, mainly in TPS composites. Their thermal stability enhances since biofiber hinders the "out-diffusion" of volatile molecules from the polymer matrix, while mechanical properties could raise due to the natural affinity between husk and starch in the pehuen seed. Copyright © 2012 Elsevier Ltd. All rights reserved.

  6. Predicting Physics Achievement: Attitude towards Physics, Self-Efficacy of Learning Physics, and Mathematics Achievement

    Science.gov (United States)

    Kapucu, Serkan

    2017-01-01

    This study aims to explore the relationships among Turkish high school students' attitude towards physics, self-efficacy of learning physics, mathematics achievement, and physics achievement. To investigate the relationships, a unique questionnaire that identifies the attitude, self-efficacy and achievements were delivered to a total of 301 high…

  7. Equilibrium statistical mechanics

    CERN Document Server

    Mayer, J E

    1968-01-01

    The International Encyclopedia of Physical Chemistry and Chemical Physics, Volume 1: Equilibrium Statistical Mechanics covers the fundamental principles and the development of theoretical aspects of equilibrium statistical mechanics. Statistical mechanical is the study of the connection between the macroscopic behavior of bulk matter and the microscopic properties of its constituent atoms and molecules. This book contains eight chapters, and begins with a presentation of the master equation used for the calculation of the fundamental thermodynamic functions. The succeeding chapters highlight t

  8. The physical mechanism of magnetic field controlled magnetocaloric effect and magnetoresistance in bulk PrGa compound

    Science.gov (United States)

    Zheng, X. Q.; Wu, H.; Chen, J.; Zhang, B.; Li, Y. Q.; Hu, F. X.; Sun, J. R.; Huang, Q. Z.; Shen, B. G.

    2015-01-01

    The PrGa compound shows excellent performance on the magnetocaloric effect (MCE) and magnetoresistance (MR). The physical mechanism of MCE and MR in PrGa compound was investigated and elaborated in detail on the basis of magnetic measurement, heat capacity measurement and neutron powder diffraction (NPD) experiment. New types of magnetic structure and magnetic transition are found. The results of the NPD along with the saturation magnetic moment (MS) and magnetic entropy (SM) indicate that the magnetic moments are randomly distributed within the equivalent conical surface in the ferromagnetic (FM) temperature range. PrGa compound undergoes an FM to FM transition and an FM to paramagnetic (PM) transition as temperature increases. The magnetizing process was discussed in detail and the physical mechanism of the magnetic field controlled magnetocaloric effect (MCE) and the magnetoresistance (MR) was studied. The formation of the plateau on MCE curve was explained and MR was calculated in detail on the basis of the magnetic structure and the analysis of the magnetizing process. The experimental results are in excellent agreement with the calculations. Finally, the expression of MR = β(T)X2 and its application conditions were discussed, where X is M(H)/Meff, and Meff is the paramagnetic effective moment. PMID:26455711

  9. Influence of aluminium content on the physical, mechanical and sliding wear properties of zinc-based alloys

    International Nuclear Information System (INIS)

    Prasad, B.K.; Patwardhan, A.K.; Yegneswaran, A.H.

    1997-01-01

    Attention has been focussed on the influence of Al content on the physical, mechanical and sliding wear properties of Zn-based alloys. Aspects studied include microstructure, density, electrical conductivity, hardness, tensile strength and elongation as well as sliding wear response of the alloys. Microstructural features of the alloys showed the presence of primary α, eutectic/eutectoid α + η (depending on whether the alloy was hypereutectic/hypereutectoid with regard to the concentration of Al) along with the meta stable ε phase. The study suggests that it is possible to design and develop Zn-based alloys with a wide range of concentration of Al. The alloys in turn attain different combinations of physical, mechanical and wear properties which could suit a variety of engineering applications. Increasing the Al content in the alloy system proves beneficial within limits. In other words, there exists an optimum quantity of Al which could reap its advantage to the maximum extent. This of course varies with reference to a specific property of the alloy(s). The changing response of the alloys has been explained in terms of their microstructural features and the effects produced as a result of the test conditions maintained while characterizing the specimens. (orig.)

  10. Effect of epoxidised soybean oil loading as plasticiser on physical, mechanical and thermal properties of polyvinylchloride

    Science.gov (United States)

    Rahmah, M.; Nurazzi, N. Mohd; Farah Nordyana, A. R.; Syed Anas, S. M.

    2017-07-01

    The aim of this paper is to study the effect of epoxidised soybean oil (ESO) as an alternative plasticizer on physical, mechanical and thermal properties of plasticised polyvinyl chloride (PPVC). Samples were prepared using 10, 20, 30 and 40% by weight percent of ESO. The samples were characterized for density, water absorption, tensile, hardness and thermal properties. The addition of ESO as plasticizer in PVC had caused significant effect on the physical and mechanical properties of PPVC. Increasing of ESO loading had resulted in decreased density, tensile strength, tensile modulus but increased in elongation at break and shore hardness. From water absorption study, it was observed that the all the samples reached the plateau absorption at days 8 to 10 with absorption percentages of between 1.8 to 2%. In general the crystallinity of PPVC maintained between 10 to 13% with increase in ESO loading while the melting point ( Tm) is slightly decreased about 3 to 6°C. In this study, ESO which acts as plasticiser were found to result in lower glass transition temperature (Tg). The enhancements of super cooling with higher ESO loading were found to increase the crystallization temperature, promoting crystallisation and act as nucleating agent.

  11. 30 years of Physics Education Research at the University of Washington

    Science.gov (United States)

    Shaffer, Peter S.

    2017-01-01

    Over the past 30 years, members of the UW Physics Education Group have examined student learning in courses serving a wide range of populations. Most of the focus has been on elementary, middle, and high school teachers and students in introductory university physics courses, but more recently, the effort has expanded to include physics majors in upper-division courses on quantum mechanics and electrodynamics. In general, the group has taken a practical approach that focuses on identifying instructional strategies that are effective at promoting conceptual understanding and student reasoning ability. Examples will be drawn from across these courses to illustrate common themes and connections.

  12. The association between type of spine fracture and the mechanism of trauma: A useful tool for identifying mechanism of trauma on legal medicine field.

    Science.gov (United States)

    Aghakhani, Kamran; Kordrostami, Roya; Memarian, Azadeh; Asl, Nahid Dadashzadeh; Zavareh, Fatemeh Noorian

    2018-05-01

    Determining the association between mechanism of trauma, and the type of spine column fracture is a useful approach for exactly describing spine injury on forensic medicine field. We aimed to determine mechanism of trauma based on distribution of the transition of spinal column fractures. This cross-sectional survey was performed on 117 consecutive patients with the history of spinal trauma who were admitted to emergency ward of Rasoul-e-Akram Hospital in Tehran, Iran from April 2015 to March 2016. The baseline characteristics were collected by reviewing the hospital recorded files. With respect to mechanism of fracture, 63.2% of fractures were caused by falling, 30.8% by collisions with motor vehicles, and others caused by the violence. Regarding site of fracture, lumbosacral was affected in 47.9%, thoracic in 29.9%, and cervical in 13.7%. Regarding type of fracture, burst fracture was the most common type (71.8%) followed by compressive fracture (14.5%). The site of fracture was specifically associated with the mechanism of injury; the most common injuries induced by falling from height were found in lumbosacral and cervical sites, and the most frequent injuries by traffic accidents were found in thoracic site; also the injuries following violence were observed more in lumbar vertebrae. The burst fractures were more revealed in the patients affected by falling from height and by traffic accidents, and both burst and compressive fractures were more observed with the same result in the patients injured with violence (p = 0.003). The type of spine fracture due to trauma is closely associated with the mechanism of trauma that can be helpful in legal medicine to identify the mechanism of trauma in affected patients. Copyright © 2018. Published by Elsevier Ltd.

  13. Streptococcus pneumoniae eradicates preformed Staphylococcus aureus biofilms through a mechanism requiring physical contact

    Directory of Open Access Journals (Sweden)

    Faidad Khan

    2016-09-01

    Full Text Available Staphylococcus aureus (Sau strains are a main cause of disease, including nosocomial infections which have been linked to the production of biofilms and the propagation of antibiotic resistance strains such as methicillin-resistant Staphylococcus aureus (MRSA. A previous study found that Streptococcus pneumoniae (Spn strains kill planktonic cultures of Sau strains. In this work, we have further evaluated in detail the eradication of Sau biofilms and investigated ultrastructural interactions of the biofilmicidal effect. Spn strain D39, which produces the competence stimulating peptide 1 (CSP1, reduced Sau biofilms within 8 h of inoculation, while TIGR4, producing CSP2, eradicated Sau biofilms and planktonic cells within 4 h. Differences were not attributed to pherotypes as other Spn strains producing different pheromones eradicated Sau within 4 h. Experiments using Transwell devices, which physically separated both species growing in the same well, demonstrated that direct contact between Spn and Sau was required to efficiently eradicate Sau biofilms and biofilm-released planktonic cells. Physical contact-mediated killing of Sau was not related to production of hydrogen peroxide as an isogenic TIGR4spxB mutant eradicated Sau bacteria within 4 h. Confocal micrographs confirmed eradication of Sau biofilms by TIGR4 and allowed us to visualize ultrastructural point of contacts between Sau and Spn. A time-course study further demonstrated spatial colocalization of Spn chains and Sau tetrads as early as 30 min post-inoculation (Pearson’s coefficient >0.72. Finally, precolonized biofilms produced by Sau strain Newman, or MRSA strain USA300, were eradicated by mid-log phase cultures of washed TIGR4 bacteria within 2 h post-inoculation. In conclusion, Spn strains rapidly eradicate pre-colonized Sau aureus biofilms, including those formed by MRSA strains, by a mechanism(s requiring bacterium-bacterium contact, but independent from the production of

  14. Potential of isotope analysis (C, Cl) to identify dechlorination mechanisms

    Science.gov (United States)

    Cretnik, Stefan; Thoreson, Kristen; Bernstein, Anat; Ebert, Karin; Buchner, Daniel; Laskov, Christine; Haderlein, Stefan; Shouakar-Stash, Orfan; Kliegman, Sarah; McNeill, Kristopher; Elsner, Martin

    2013-04-01

    Chloroethenes are commonly used in industrial applications, and detected as carcinogenic contaminants in the environment. Their dehalogenation is of environmental importance in remediation processes. However, a detailed understanding frequently accounted problem is the accumulation of toxic degradation products such as cis-dichloroethylene (cis-DCE) at contaminated sites. Several studies have addressed the reductive dehalogenation reactions using biotic and abiotic model systems, but a crucial question in this context has remained open: Do environmental transformations occur by the same mechanism as in their corresponding in vitro model systems? The presented study shows the potential to close this research gap using the latest developments in compound specific chlorine isotope analysis, which make it possible to routinely measure chlorine isotope fractionation of chloroethenes in environmental samples and complex reaction mixtures.1,2 In particular, such chlorine isotope analysis enables the measurement of isotope fractionation for two elements (i.e., C and Cl) in chloroethenes. When isotope values of both elements are plotted against each other, different slopes reflect different underlying mechanisms and are remarkably insensitive towards masking. Our results suggest that different microbial strains (G. lovleyi strain SZ, D. hafniense Y51) and the isolated cofactor cobalamin employ similar mechanisms of reductive dechlorination of TCE. In contrast, evidence for a different mechanism was obtained with cobaloxime cautioning its use as a model for biodegradation. The study shows the potential of the dual isotope approach as a tool to directly compare transformation mechanisms of environmental scenarios, biotic transformations, and their putative chemical lab scale systems. Furthermore, it serves as an essential reference when using the dual isotope approach to assess the fate of chlorinated compounds in the environment.

  15. Physical and mechanical properties of spinach for whole-surface online imaging inspection

    Science.gov (United States)

    Tang, Xiuying; Mo, Chang Y.; Chan, Diane E.; Peng, Yankun; Qin, Jianwei; Yang, Chun-Chieh; Kim, Moon S.; Chao, Kuanglin

    2011-06-01

    The physical and mechanical properties of baby spinach were investigated, including density, Young's modulus, fracture strength, and friction coefficient. The average apparent density of baby spinach leaves was 0.5666 g/mm3. The tensile tests were performed using parallel, perpendicular, and diagonal directions with respect to the midrib of each leaf. The test results showed that the mechanical properties of spinach are anisotropic. For the parallel, diagonal, and perpendicular test directions, the average values for the Young's modulus values were found to be 2.137MPa, 1.0841 MPa, and 0.3914 MPa, respectively, and the average fracture strength values were 0.2429 MPa, 0.1396 MPa, and 0.1113 MPa, respectively. The static and kinetic friction coefficient between the baby spinach and conveyor belt were researched, whose test results showed that the average coefficients of kinetic and maximum static friction between the adaxial (front side) spinach leaf surface and conveyor belt were 1.2737 and 1.3635, respectively, and between the abaxial (back side) spinach leaf surface and conveyor belt were 1.1780 and 1.2451 respectively. These works provide the basis for future development of a whole-surface online imaging inspection system that can be used by the commercial vegetable processing industry to reduce food safety risks.

  16. Report on the SNL/NSF International Workshop on Joint Mechanics, Arlington, Virginia, 16-18 October 2006.

    Energy Technology Data Exchange (ETDEWEB)

    Ewins, David J. (Imperial College, London England, UK); Bergman, Lawrence A. (University of Illinois, Urbana, IL); Segalman, Daniel Joseph

    2007-11-01

    The NSF/SNL joint mechanics workshop, held in Arlington, Virginia, 16-18 October, 2006, attempted to assess the current state of the art for modeling joint mechanics for the purpose of structural dynamics calculation, to identify the underlying physics issues that must be addressed to advance the field, and to propose a path forward. Distinguished participants from several countries representing research communities that focus on very different length and time scales identified multiple challenges in bridging those scales. Additionally, two complementary points of view were developed for addressing those challenges. The first approach - the 'bottom-up' perspective - attempts to bridge scales by starting from the smallest length scale and working up. The other approach starts at the length scale of application and attempts to deduce mechanics at smaller length scales through reconciliation with laboratory observation. Because interface physics is a limiting element of predictive simulation in defense and transportation, this issue will be of continuing importance for the foreseeable future.

  17. Physics from symmetry

    CERN Document Server

    Schwichtenberg, Jakob

    2015-01-01

    This is a textbook that derives the fundamental theories of physics from symmetry.   It starts by introducing, in a completely self-contained way, all mathematical tools needed to use symmetry ideas in physics. Thereafter, these tools are put into action and by using symmetry constraints, the fundamental equations of Quantum Mechanics, Quantum Field Theory, Electromagnetism, and Classical Mechanics are derived. As a result, the reader is able to understand the basic assumptions behind, and the connections between the modern theories of physics. The book concludes with first applications of the previously derived equations.

  18. Statistical Physics

    CERN Document Server

    Mandl, Franz

    1988-01-01

    The Manchester Physics Series General Editors: D. J. Sandiford; F. Mandl; A. C. Phillips Department of Physics and Astronomy, University of Manchester Properties of Matter B. H. Flowers and E. Mendoza Optics Second Edition F. G. Smith and J. H. Thomson Statistical Physics Second Edition E. Mandl Electromagnetism Second Edition I. S. Grant and W. R. Phillips Statistics R. J. Barlow Solid State Physics Second Edition J. R. Hook and H. E. Hall Quantum Mechanics F. Mandl Particle Physics Second Edition B. R. Martin and G. Shaw The Physics of Stars Second Edition A. C. Phillips Computing for Scient

  19. Physical mechanisms related to the degradation of LPCVD tungsten contacts at elevated temperatures

    International Nuclear Information System (INIS)

    Shenai, K.; Lewis, N.; Smith, G.A.; McConnell, M.D.; Burrell, M.

    1990-01-01

    The thermal stability of LPCVD (low pressure chemical vapor deposition) tungsten contacts to n-type silicon is studied at elevated temperatures in excess of 650 degrees C. The process variants studied include silicon doping, tungsten thickness, and post tungsten deposition dielectric stress temperatures. Detailed measurements of Kelvin contact resistance were made at room temperature as well as at elevated temperatures up to 165 degrees C. The tungsten contact resistance degradation at elevated stress temperatures is correlated with worm hole formation in silicon and the formation and diffusion of tungsten silicide. Extensive analytical measurements were used to characterize the material transformation at elevated stress temperatures to understand the physical mechanisms causing contact degradation

  20. Rooting the biggest problems in physics

    DEFF Research Database (Denmark)

    Javadi, Hossein; Forouzbakhsh, Farshid

    2016-01-01

    to combine these three theories of classical mechanics, quantum mechanics and relativity in order to reach to a unique physics. Eventually, by answering the unanswered questions, the physics problems will be solved. In this paper, the stems of physics problems are expressed and the solution of them...

  1. Oriented particleboard made from tali bamboo (Gigantochloa Apus): effect of particle length on physical and mechanical properties

    Science.gov (United States)

    Iswanto, A. H.

    2018-02-01

    Strength properties are one of the problems of particleboard. The objective of this research was to analyze the effect of particle length on physical and mechanical properties oriented particleboard (OPB). The variation particle length size in this experiment namely 3, 5, and 7 cm. The width and thickness size of all bamboo particles were 1 and 0.1 cm respectively. 12% mixed resin of UF and MDI (70/30 %w/w) used for binding. Board size fabricated in 25 by 25 cm2 with thickness and density target of 1 cm and 0.75 gcm-3. The OPB layers for face and back layers aligned perpendicular to the core layer. The weight ratio of the face-to-core-to-back layers were set at 1:2:1. Mat was pressed at 160 °C under 30 kgcm-2 as the pressure for 10 minutes. The results showed that 7 cm length particle produced of the best strength and dimensional stability. The increase of particle length resulted in increasing of strength properties. Over all the parameters of physical and mechanical properties fulfill requirements of JIS A 5908 (2003) excepted of thickness swelling and modulus of elasticity.

  2. Comparing Physical Therapy Accompanying Exercise with Only Exercise Treatments in Patients with Chronic Mechanical Low Back Pain

    Directory of Open Access Journals (Sweden)

    Özlem Yılmaz

    2015-08-01

    Full Text Available Objective: Investigating and comparing the effects of exercise and physical therapy accompanying exercise treatments in patients with chronic low back pain. Materials and Methods: Twenty three patients with mechanical type low back existing more than 3 months were included one of the exercise or the physical therapy+exercise groups according to their application sequence. Both of the groups performed lumbar flexion and extension exercises, strengthening of the lumbar and abdominal muscle exercises and iliopsoas, hamstring and quadriceps stretching exercises two times a day for 14 days. The physical therapy group was given hot pack+therapeutic ultrasound+ interferential current for 10 days additionally. Degree of the low back pain was evaluated with visual analog scale (VAS, range of joint motion was evaluated with hand finger floor distance (HFFD and Modified Schober test, functional status was evaluated with Modified Oswestry Low Back Pain Scale and quality of life was evaluated with Short form-36 (SF-36 before and a month after the treatments. Results: In both groups (exercise group: average age 59 years, 21 females, 2 males; physical therapy group: average age 60 years, 20 females, 3 males pain intensity and HFFD decreased and Modified Schober increased, functionality recovered, pain and physical functions of SF-36 improved after the treatments. SF-36-physical role difficulty also improved in the exercise group. Decrease in pain, increase in HFFD andimproving of the functional status were all significantly more in the physical therapy group. There were no difference between the groups in terms of Modified Schober measurement and changes of the quality of life. Conclusions: Exercises and exercise+physical therapy are both effective in chronic low back pain. Successful results can be taken by addition of the physical therapy in patients who do not benefit sufficiently from exercise therapy. (Turkish Journal of Osteoporosis 2015;21: 73-8

  3. Probabilities in physics

    CERN Document Server

    Hartmann, Stephan

    2011-01-01

    Many results of modern physics--those of quantum mechanics, for instance--come in a probabilistic guise. But what do probabilistic statements in physics mean? Are probabilities matters of objective fact and part of the furniture of the world, as objectivists think? Or do they only express ignorance or belief, as Bayesians suggest? And how are probabilistic hypotheses justified and supported by empirical evidence? Finally, what does the probabilistic nature of physics imply for our understanding of the world? This volume is the first to provide a philosophical appraisal of probabilities in all of physics. Its main aim is to make sense of probabilistic statements as they occur in the various physical theories and models and to provide a plausible epistemology and metaphysics of probabilities. The essays collected here consider statistical physics, probabilistic modelling, and quantum mechanics, and critically assess the merits and disadvantages of objectivist and subjectivist views of probabilities in these fie...

  4. Candidate mechanisms accounting for effects of physical activity on breast carcinogenesis.

    Science.gov (United States)

    Thompson, Henry J; Jiang, Weiqin; Zhu, Zongjian

    2009-09-01

    Evidence is strong that a reduction in risk for breast cancer is associated with moderate to vigorous physical activity (PA); however, there is limited understanding of the role of type, intensity, duration, and frequency of PA and their mechanisms in accounting for this health benefit. The objective of this review is to stimulate investigations of candidate mechanisms that may account for the effects of the intensity and duration of aerobic PA on breast cancer risk and tumor burden. Three hypotheses are considered: 1) the mTOR network hypothesis: PA inhibits carcinogenesis by suppressing the activation of the mTOR signaling network in mammary carcinomas; 2) the hormesis hypothesis: the carcinogenic response to PA is nonlinear and accounted for by a physiological cellular stress response; and 3) the metabolic reprogramming hypothesis: PA limits the amount of glucose and glutamine available to mammary carcinomas thereby inducing apoptosis because tumor-associated metabolic programming is reversed. To link these hypotheses to systemic effects of PA, it is recommended that consideration be given to determining: 1) what contracting muscle releases into circulation or removes from circulation that would directly modulate the carcinogenic process in epithelial cells; 2) whether the effects of muscle contraction on epithelial cell carcinogenesis are exerted in an endocrine, paracrine, autocrine, or intracrine manner; and 3) if the effects of muscle contraction on malignant cells differ from effects on normal or premalignant cells that do not manifest the hallmarks of malignancy. (c) 2009 IUBMB

  5. EFFECT OF REMOVING OLEORESIN WITH VARIOUS CHEMICAL COMPOUNDS ON PHYSICAL AND MECHANICAL PROPERTIES OF KERUING WOOD (DIPTEROCARPUS SPP.

    Directory of Open Access Journals (Sweden)

    Bambang Wiyono

    2007-03-01

    Full Text Available Keruing  (Dipterocarpus spp.  was  the  second  important  wood  export of   Indonesia. Unfortunately, this wood contains oleoresin that hinders its utilization. Currently, the method used to remove oleoresin from keruing is by soaking it into bollied sodium salt solution. Result of  this method is unsatisfactory because the residual heavy oleoresin might still appear on the wood surface. The study was conducted to determine suitable chemical compounds for removing oleoresin from keruing, and the effects on physical and mechanical properties of the wood. Four types of chemical compounds were tested, i.e. sodium chloride, oxalic acid, sulfuric acid, and nitric acid, each at the concentrations of  0.5 percent, 1.0 percent, and 1.5 percent. Wood samples were soaked in the boiling solution at different concentration level for seven hours. When the solution cooled down, the oleoresin exudated out of  the wood samples was separated. The oleoresin was weighed for recovery determination after air dried, and the wood samples were cut into smaller-sized specimens for the physical and mechanical testing (MOE, MOR, compression parallel to grain, hardness and density. Results showed that sulfuric acid was the best chemical compound for removing oleoresin, and the higher the concentration the greater the oleoresin recovery. The second best chemical compound was nitric acid at an optimum concentration of one percent. The soaking of keruing in sulfuric acid and oxalic acid solution resulted in paler wood color compare with the untreated wood sample. Nitric acid solutions caused the color of the wood surface to turn into yellow brownish. The physical and mechanical properties (MOE, MOR, compression parallel to grain, hardness and density of the oleoresin-removed keruing were slightly lower than the untreated (control samples.

  6. Quantum physics; Physique quantique

    Energy Technology Data Exchange (ETDEWEB)

    Basdevant, J.L.; Dalibart, J. [Ecole Polytechnique, 75 - Paris (France)

    1997-12-31

    This pedagogical book gives an initiation to the principles and practice of quantum mechanics. A large part is devoted to experimental facts and to their analysis: concrete facts, phenomena and applications related to fundamental physics, elementary particles, astrophysics, high-technology, semi-conductors, micro-electronics and lasers. The book is divided in 22 chapters dealing with: quantum phenomena, wave function and Schroedinger equation, physical units and measurements, energy quantification of some simple systems, Hilbert space, Dirac formalism and quantum mechanics postulates, two-state systems and ammonia Maser principle, bands theory and crystals conductibility, commutation of observables, Stern and Gerlach experiment, approximation methods, kinetic momentum in quantum mechanics, first description of atoms, 1/2 spin formalism and magnetic resonance, Lagrangian, Hamiltonian and Lorentz force in quantum mechanics, addition of kinetic momenta and fine and hyper-fine structure of atomic lines, identical particle systems and Pauli principle, qualitative physics and scale of size of some microscopic and macroscopic phenomena, systems evolution, collisions and cross sections, invariance and conservation laws, quantum mechanics and astrophysics, and historical aspects of quantum mechanics. (J.S.) refs.

  7. Advances in applied mechanics

    CERN Document Server

    Wu, Theodore Y; Wu, Theodore Y

    2000-01-01

    This highly acclaimed series provides survey articles on the present state and future direction of research in important branches of applied solid and fluid mechanics. Mechanics is defined as a branch of physics that focuses on motion and on the reaction of physical systems to internal and external forces.

  8. Connecting Symbolic Integrals to Physical Meaning in Introductory Physics

    Science.gov (United States)

    Amos, Nathaniel R.

    This dissertation presents a series of studies pertaining to introductory physics students' abilities to derive physical meaning from symbolic integrals (e.g., the integral of vdt) and their components, namely differentials and differential products (e.g., dt and vdt, respectively). Our studies focus on physical meaning in the form of interpretations (e.g., "the total displacement of an object") and units (e.g., "meters"). Our first pair of studies independently attempted to identify introductory-level mechanics students' common conceptual difficulties with and unproductive interpretations of physics integrals and their components, as well as to estimate the frequencies of these difficulties. Our results confirmed some previously-observed incorrect interpretations, such as the notion that differentials are physically meaningless; however, we also uncovered two new conceptualizations of differentials, the "rate" (differentials are "rates" or "derivatives") and "instantaneous value" (differentials are values of physical variables "at an instant") interpretations, which were exhibited by more than half of our participants at least once. Our next study used linear regression analysis to estimate the strengths of the inter-connections between the abilities to derive physical meaning from each of differentials, differential products, and integrals in both first- and second-semester, calculus-based introductory physics. As part of this study, we also developed a highly reliable, multiple choice assessment designed to measure students' abilities to connect symbolic differentials, differential products, and integrals with their physical interpretations and units. Findings from this study were consistent with statistical mediation via differential products. In particular, students' abilities to extract physical meaning from differentials were seen to be strongly related to their abilities to derive physical meaning from differential products, and similarly differential

  9. iNR-PhysChem: a sequence-based predictor for identifying nuclear receptors and their subfamilies via physical-chemical property matrix.

    Directory of Open Access Journals (Sweden)

    Xuan Xiao

    Full Text Available Nuclear receptors (NRs form a family of ligand-activated transcription factors that regulate a wide variety of biological processes, such as homeostasis, reproduction, development, and metabolism. Human genome contains 48 genes encoding NRs. These receptors have become one of the most important targets for therapeutic drug development. According to their different action mechanisms or functions, NRs have been classified into seven subfamilies. With the avalanche of protein sequences generated in the postgenomic age, we are facing the following challenging problems. Given an uncharacterized protein sequence, how can we identify whether it is a nuclear receptor? If it is, what subfamily it belongs to? To address these problems, we developed a predictor called iNR-PhysChem in which the protein samples were expressed by a novel mode of pseudo amino acid composition (PseAAC whose components were derived from a physical-chemical matrix via a series of auto-covariance and cross-covariance transformations. It was observed that the overall success rate achieved by iNR-PhysChem was over 98% in identifying NRs or non-NRs, and over 92% in identifying NRs among the following seven subfamilies: NR1--thyroid hormone like, NR2--HNF4-like, NR3--estrogen like, NR4--nerve growth factor IB-like, NR5--fushi tarazu-F1 like, NR6--germ cell nuclear factor like, and NR0--knirps like. These rates were derived by the jackknife tests on a stringent benchmark dataset in which none of protein sequences included has ≥60% pairwise sequence identity to any other in a same subset. As a user-friendly web-server, iNR-PhysChem is freely accessible to the public at either http://www.jci-bioinfo.cn/iNR-PhysChem or http://icpr.jci.edu.cn/bioinfo/iNR-PhysChem. Also a step-by-step guide is provided on how to use the web-server to get the desired results without the need to follow the complicated mathematics involved in developing the predictor. It is anticipated that iNR-PhysChem may

  10. Philosophy of physics quantum theory

    CERN Document Server

    Maudlin, Tim

    2019-01-01

    In this book, Tim Maudlin, one of the world’s leading philosophers of physics, offers a sophisticated, original introduction to the philosophy of quantum mechanics. The briefest, clearest, and most refined account of his influential approach to the subject, the book will be invaluable to all students of philosophy and physics. Quantum mechanics holds a unique place in the history of physics. It has produced the most accurate predictions of any scientific theory, but, more astonishing, there has never been any agreement about what the theory implies about physical reality. Maudlin argues that the very term “quantum theory” is a misnomer. A proper physical theory should clearly describe what is there and what it does—yet standard textbooks present quantum mechanics as a predictive recipe in search of a physical theory. In contrast, Maudlin explores three proper theories that recover the quantum predictions: the indeterministic wavefunction collapse theory of Ghirardi, Rimini, and Weber; the deterministic ...

  11. Using a Physical Education Environmental Survey to Identify Areas of Concern and Improve Conditions

    Science.gov (United States)

    Hill, Grant; Hulbert, George

    2007-01-01

    School environmental conditions can impact learning in physical educational classes. It is important for schools to control environmental health hazards, not only to promote a conducive school learning environment, but to also reduce associated health risks. To help physical education leaders determine the quality of physical education facilities…

  12. Identifying the causes of differences in ozone production from the CB05 and CBMIV chemical mechanisms

    Directory of Open Access Journals (Sweden)

    R. D. Saylor

    2012-02-01

    Full Text Available An investigation was conducted to identify the mechanistic differences between two versions of the carbon bond gas-phase chemical mechanism (CB05 and CBMIV which consistently lead to larger ground-level ozone concentrations being produced in the CB05 version of the National Air Quality Forecasting Capability (NAQFC modeling system even though the two parallel forecast systems utilize the same meteorology and base emissions and similar initial and boundary conditions. Box models of each of the mechanisms as they are implemented in the NAQFC were created and a set of 12 sensitivity simulations was designed. The sensitivity simulations independently probed the conceptual mechanistic differences between CB05 and CBMIV and were exercised over a 45-scenario simulation suite designed to emulate the wide range of chemical regimes encountered in a continental-scale atmospheric chemistry model. Results of the sensitivity simulations indicate that two sets of reactions that were included in the CB05 mechanism, but which were absent from the CBMIV mechanism, are the primary causes of the greater ozone production in the CB05 version of the NAQFC. One set of reactions recycles the higher organic peroxide species of CB05 (ROOH, resulting in additional photochemically reactive products that act to produce additional ozone in some chemical regimes. The other set of reactions recycles reactive nitrogen from less reactive forms back to NO2, increasing the effective NOx concentration of the system. In particular, the organic nitrate species (NTR, which was a terminal product for reactive nitrogen in the CBMIV mechanism, acts as a reservoir species in CB05 to redistribute NOx from major source areas to potentially NOx-sensitive areas where additional ozone may be produced in areas remote from direct NOx sources.

  13. Theoretical physics 8 statistical physics

    CERN Document Server

    Nolting, Wolfgang

    2018-01-01

    This textbook offers a clear and comprehensive introduction to statistical physics, one of the core components of advanced undergraduate physics courses. It follows on naturally from the previous volumes in this series, using methods of probability theory and statistics to solve physical problems. The first part of the book gives a detailed overview on classical statistical physics and introduces all mathematical tools needed. The second part of the book covers topics related to quantized states, gives a thorough introduction to quantum statistics, followed by a concise treatment of quantum gases. Ideally suited to undergraduate students with some grounding in quantum mechanics, the book is enhanced throughout with learning features such as boxed inserts and chapter summaries, with key mathematical derivations highlighted to aid understanding. The text is supported by numerous worked examples and end of chapter problem sets. About the Theoretical Physics series Translated from the renowned and highly successf...

  14. Shedding light: laser physics and mechanism of action.

    Science.gov (United States)

    De Felice, E

    2010-02-01

    Lasers have affected health care in many ways. Clinical applications have been found in a number of medical and surgical specialities. In particular, applications of laser technology in phlebology has made it essential for vein physicians to obtain a fundamental knowledge of laser physics, laser operation and also to be well versed in laser safety procedures. This article reviews recommended text books and current literature to detail the basics of laser physics and its application to venous disease. Laser safety and laser side effects are also discussed.

  15. Physical microscopic free-choice model in the framework of a Darwinian approach to quantum mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Baladron, Carlos [Departamento de Fisica Teorica, Atomica y Optica, Universidad de Valladolid, E-47011, Valladolid (Spain)

    2017-06-15

    A compatibilistic model of free choice for a fundamental particle is built within a general framework that explores the possibility that quantum mechanics be the emergent result of generalised Darwinian evolution acting on the abstract landscape of possible physical theories. The central element in this approach is a probabilistic classical Turing machine -basically an information processor plus a randomiser- methodologically associated with every fundamental particle. In this scheme every system acts not under a general law, but as a consequence of the command of a particular, evolved algorithm. This evolved programme enables the particle to algorithmically anticipate possible future world configurations in information space, and as a consequence, without altering the natural forward causal order in physical space, to incorporate elements to the decision making procedure that are neither purely random nor strictly in the past, but in a possible future. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  16. After physics

    CERN Document Server

    Albert, David Z

    2015-01-01

    After Physics presents ambitious new essays about some of the deepest questions at the foundations of physics, by the physicist and philosopher David Albert. The book’s title alludes to the close connections between physics and metaphysics, much in evidence throughout these essays. It also alludes to the work of imagining what it would be like for the project of physical science—considered as an investigation into the fundamental laws of nature—to be complete. Albert argues that the difference between the past and the future—traditionally regarded as a matter for metaphysical or conceptual or linguistic or phenomenological analysis—can be understood as a mechanical phenomenon of nature. In another essay he contends that all versions of quantum mechanics that are compatible with the special theory of relativity make it impossible, even in principle, to present the entirety of what can be said about the world as a narrative sequence of “befores” and “afters.” Any sensible and realistic way of...

  17. The effect of alkali treatment of bamboo on the physical and mechanical properties of particleboard made from bamboo - industrial wood particles

    Directory of Open Access Journals (Sweden)

    vahid vaziri

    2018-02-01

    Full Text Available In this study, physical and mechanical properties of single layer particleboard made from bamboo powder (with and without alkali treatment and wood particles were investigated. Bamboo powder (30 mesh particles was treated with 5% hydroxide sodium for 120 minutes. Industrial wood chips from Sanate Choube Shomal Company were used.The variable in this research were the ratio of bamboo powder (with and without alkali treatment to wood chips (at four levels; 0:100, 10:90, 20:80, 30:70. Urea formaldehyde resin used at 10 percent level of dry weight of raw material as well as ammonium chloride was used as a catalyst at 2 percent level of the dry weight of adhesive. Physical and mechanical properties of panels measured according to EN Standard. Mechanical properties of the particleboards made from treated bamboo was superior to the relevant untreated bamboo. Water absorption and thickness swelling after 2 and 24 hours immersion in water decreased with alkali treatment. Mercerization, or treating cellulose fibers in alkaline solution, because of fibrillation, the removal of lignin and hemicellulose enhances the mechanical properties and dimension stability of the particleboard by promoting resin-fiber mechanical interlocking at the interface. Results showed, there was usability of the treated bamboo up to 30 percent for general purpose boards for use in dry conditions.

  18. Quantum Physics for Beginners.

    Science.gov (United States)

    Strand, J.

    1981-01-01

    Suggests a new approach for teaching secondary school quantum physics. Reviews traditional approaches and presents some characteristics of the three-part "Quantum Physics for Beginners" project, including: quantum physics, quantum mechanics, and a short historical survey. (SK)

  19. Defended to the Nines: 25 Years of Resistance Gene Cloning Identifies Nine Mechanisms for R Protein Function.

    Science.gov (United States)

    Kourelis, Jiorgos; van der Hoorn, Renier A L

    2018-02-01

    Plants have many, highly variable resistance ( R ) gene loci, which provide resistance to a variety of pathogens. The first R gene to be cloned, maize ( Zea mays ) Hm1 , was published over 25 years ago, and since then, many different R genes have been identified and isolated. The encoded proteins have provided clues to the diverse molecular mechanisms underlying immunity. Here, we present a meta-analysis of 314 cloned R genes. The majority of R genes encode cell surface or intracellular receptors, and we distinguish nine molecular mechanisms by which R proteins can elevate or trigger disease resistance: direct (1) or indirect (2) perception of pathogen-derived molecules on the cell surface by receptor-like proteins and receptor-like kinases; direct (3) or indirect (4) intracellular detection of pathogen-derived molecules by nucleotide binding, leucine-rich repeat receptors, or detection through integrated domains (5); perception of transcription activator-like effectors through activation of executor genes (6); and active (7), passive (8), or host reprogramming-mediated (9) loss of susceptibility. Although the molecular mechanisms underlying the functions of R genes are only understood for a small proportion of known R genes, a clearer understanding of mechanisms is emerging and will be crucial for rational engineering and deployment of novel R genes. © 2018 American Society of Plant Biologists. All rights reserved.

  20. An effective XML based name mapping mechanism within StoRM

    International Nuclear Information System (INIS)

    Corso, E; Forti, A; Ghiselli, A; Magnoni, L; Zappi, R

    2008-01-01

    In a Grid environment the naming capability allows users to refer to specific data resources in a physical storage system using a high level logical identifier. This logical identifier is typically organized in a file system like structure, a hierarchical tree of names. Storage Resource Manager (SRM) services map the logical identifier to the physical location of data evaluating a set of parameters as the desired quality of services and the VOMS attributes specified in the requests. StoRM is a SRM service developed by INFN and ICTP-EGRID to manage file and space on standard POSIX and high performing parallel and cluster file systems. An upcoming requirement in the Grid data scenario is the orthogonality of the logical name and the physical location of data, in order to refer, with the same identifier, to different copies of data archived in various storage areas with different quality of service. The mapping mechanism proposed in StoRM is based on a XML document that represents the different storage components managed by the service, the storage areas defined by the site administrator, the quality of service they provide and the Virtual Organization that want to use the storage area. An appropriate directory tree is realized in each storage component reflecting the XML schema. In this scenario StoRM is able to identify the physical location of a requested data evaluating the logical identifier and the specified attributes following the XML schema, without querying any database service. This paper presents the namespace schema defined, the different entities represented and the technical details of the StoRM implementation

  1. Modern Physics Simulations

    Science.gov (United States)

    Brandt, Douglas; Hiller, John R.; Moloney, Michael J.

    1995-10-01

    The Consortium for Upper Level Physics Software (CUPS) has developed a comprehensive series of Nine Book/Software packages that Wiley will publish in FY `95 and `96. CUPS is an international group of 27 physicists, all with extensive backgrounds in the research, teaching, and development of instructional software. The project is being supported by the National Science Foundation (PHY-9014548), and it has received other support from the IBM Corp., Apple Computer Corp., and George Mason University. The Simulations being developed are: Astrophysics, Classical Mechanics, Electricity & Magnetism, Modern Physics, Nuclear and Particle Physics, Quantum Mechanics, Solid State, Thermal and Statistical, and Wave and Optics.

  2. Effect of Radiation on Physical and Mechanical Properties of Polyblend polyethylene (LDPE)-Akrilonitril Butadiene Styrene(ADS)

    International Nuclear Information System (INIS)

    Infrawan, M.H.; Mashuri; Sudirman

    2001-01-01

    Poly blend material is blended material that made of two or more polymer material with or without chemical reaction. Polyethylene (LDPE)- ABS poly blend material was made of two materials, ABS resin and Low Density Polyethylene (LDPE). This research is conducted to synthesize LDPE and ABS poly blend material before and after irradiation by γ ray and to investigate the effect of γ-ray irradiation doses on mechanical, and physical properties. This effect will enhanced mechanical properties of poly blend LDPE and ABS material that was caused by crosslinking. The gel fraction showed that the crosslinking occurred. The other effect of γ-ray irradiation are increased tensile strength and melting point, but the elongation at break, and yield strength decreased. The best composition to get the best properties is 5 % LDPE : 95 % ABS

  3. The role of SiO2 nanoparticles and ground granulated blast furnace slag admixtures on physical, thermal and mechanical properties of self compacting concrete

    International Nuclear Information System (INIS)

    Nazari, Ali; Riahi, Shadi

    2011-01-01

    Research highlights: → Nanoparticles in concrete. → Ground granulated blast furnace slag as concrete's binder. → Mechanical properties of concrete specimens by non-traditional admixtures. - Abstract: In this work, strength assessments and percentage of water absorption of self compacting concrete containing ground granulated blast furnace slag and SiO 2 nanoparticles as binder have been investigated. Portland cement was replaced by different amounts of ground granulated blast furnace slag and the properties of concrete specimens were investigated. Although it negatively impacts the physical and mechanical properties of concrete at early ages of curing, ground granulated blast furnace slag was found to improve the physical and mechanical properties of concrete up to 45 wt% at later ages. SiO 2 nanoparticles with the average particle size of 15 nm were added partially to concrete with the optimum content of ground granulated blast furnace slag and physical and mechanical properties of the specimens were measured. SiO 2 nanoparticle as a partial replacement of cement up to 3.0 wt% could accelerate C-S-H gel formation as a result of increased crystalline Ca(OH) 2 amount at the early ages and hence increase strength and improve the resistance to water permeability of concrete specimens. The increased SiO 2 nanoparticles' content by more than 3.0 wt%, causes the reduced strength because of the decreased crystalline Ca(OH) 2 content required for C-S-H gel formation. Several empirical relationships have been presented to predict flexural and split tensile strength of the specimens by means of the corresponding compressive strength at a certain age of curing. Accelerated peak appearance in conduction calorimetry tests, more weight loss in thermogravimetric analysis and more rapid appearance of the peaks related to hydrated products in X-ray diffraction results, all indicate that SiO 2 nanoparticles could improve mechanical and physical properties of the concrete

  4. Running from Disease: Molecular Mechanisms Associating Dopamine and Leptin Signaling in the Brain with Physical Inactivity, Obesity, and Type 2 Diabetes.

    Science.gov (United States)

    Ruegsegger, Gregory N; Booth, Frank W

    2017-01-01

    Physical inactivity is a primary contributor to diseases such as obesity, cardiovascular disease, and type 2 diabetes. Accelerometry data suggest that a majority of US adults fail to perform substantial levels of physical activity needed to improve health. Thus, understanding the molecular factors that stimulate physical activity, and physical inactivity, is imperative for the development of strategies to reduce sedentary behavior and in turn prevent chronic disease. Despite many of the well-known health benefits of physical activity being described, little is known about genetic and biological factors that may influence this complex behavior. The mesolimbic dopamine system regulates motivating and rewarding behavior as well as motor movement. Here, we present data supporting the hypothesis that obesity may mechanistically lower voluntary physical activity levels via dopamine dysregulation. In doing so, we review data that suggest mesolimbic dopamine activity is a strong contributor to voluntary physical activity behavior. We also summarize findings suggesting that obesity leads to central dopaminergic dysfunction, which in turn contributes to reductions in physical activity that often accompany obesity. Additionally, we highlight examples in which central leptin activity influences physical activity levels in a dopamine-dependent manner. Future elucidation of these mechanisms will help support strategies to increase physical activity levels in obese patients and prevent diseases caused by physical inactivity.

  5. Mechanical Analysis Of Limestone In Jaya, Lhong, And Lhoknga

    Directory of Open Access Journals (Sweden)

    Raihan .

    2012-09-01

    Full Text Available Research about mechanical analysis of limestone in District Jaya, Lhong, and Lhoknga has been done from Dec. 2011 to Mei 2012. This study aim is to classify the limestones based on physical and mechanical tests as well as identify opportunities limestone utilization in accordance with the SII 0378-80 as a condition of quality natural stone for building. Research have been done by testing compressive strength, modulus Young, wear, specific gravity, porosity, and absorption. The result shows that the limestones are qualified natural stone for building the foundation, curbstone, stone and ornamental stone or paste.

  6. Quantum mechanics

    CERN Document Server

    Mandl, Franz

    1992-01-01

    The Manchester Physics Series General Editors: D. J. Sandiford; F. Mandl; A. C. Phillips Department of Physics and Astronomy, University of Manchester Properties of Matter B. H. Flowers and E. Mendoza Optics Second Edition F. G. Smith and J. H. Thomson Statistical Physics Second Edition F. Mandl Electromagnetism Second Edition I. S. Grant and W. R. Phillips Statistics R. J. Barlow Solid State Physics Second Edition J. R. Hook and H. E. Hall Quantum Mechanics F. Mandl Particle Physics Second Edition B. R. Martin and G. Shaw The Physics of Stars Second Edition A. C. Phillips Computing for Scient

  7. 2nd National Conference on Theoretical Physics. Abstracts Book

    International Nuclear Information System (INIS)

    Grecu, Alexandru Tudor

    2004-01-01

    The 2nd National Conference on Theoretical Physics was held on 26-29 August 2004 in Constanta, Romania. The addressed physics fields within the INIS scope are as follows: classical and quantum mechanics, general physics, physics of elementary particles and fields, nuclear physics and radiation physics, classical and quantum mechanics, general physics, atomic and molecular physics, condensed matter physics

  8. Identifying the Physical Fitness, Anthropometric and Athletic Movement Qualities Discriminant of Developmental Level in Elite Junior Australian Football: Implications for the Development of Talent.

    Science.gov (United States)

    Gaudion, Sarah L; Doma, Kenji; Sinclair, Wade; Banyard, Harry G; Woods, Carl T

    2017-07-01

    Gaudion, SL, Doma, K, Sinclair, W, Banyard, HG, and Woods, CT. Identifying the physical fitness, anthropometric and athletic movement qualities discriminant of developmental level in elite junior Australian football: implications for the development of talent. J Strength Cond Res 31(7): 1830-1839, 2017-This study aimed to identify the physical fitness, anthropometric and athletic movement qualities discriminant of developmental level in elite junior Australian football (AF). From a total of 77 players, 2 groups were defined according to their developmental level; under 16 (U16) (n = 40, 15.6 to 15.9 years), and U18 (n = 37, 17.1 to 17.9 years). Players performed a test battery consisting of 7 physical fitness assessments, 2 anthropometric measurements, and a fundamental athletic movement assessment. A multivariate analysis of variance tested the main effect of developmental level (2 levels: U16 and U18) on the assessment criterions, whilst binary logistic regression models and receiver operating characteristic (ROC) curves were built to identify the qualities most discriminant of developmental level. A significant effect of developmental level was evident on 9 of the assessments (d = 0.27-0.88; p ≤ 0.05). However, it was a combination of body mass, dynamic vertical jump height (nondominant leg), repeat sprint time, and the score on the 20-m multistage fitness test that provided the greatest association with developmental level (Akaike's information criterion = 80.84). The ROC curve was maximized with a combined score of 180.7, successfully discriminating 89 and 60% of the U18 and U16 players, respectively (area under the curve = 79.3%). These results indicate that there are distinctive physical fitness and anthropometric qualities discriminant of developmental level within the junior AF talent pathway. Coaches should consider these differences when designing training interventions at the U16 level to assist with the development of prospective U18 AF players.

  9. The infinite well and Dirac delta function potentials as pedagogical, mathematical and physical models in quantum mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Belloni, M., E-mail: mabelloni@davidson.edu [Physics Department, Davidson College, Davidson, NC 28035 (United States); Robinett, R.W., E-mail: rick@phys.psu.edu [Department of Physics, The Pennsylvania State University, University Park, PA 16802 (United States)

    2014-07-01

    The infinite square well and the attractive Dirac delta function potentials are arguably two of the most widely used models of one-dimensional bound-state systems in quantum mechanics. These models frequently appear in the research literature and are staples in the teaching of quantum theory on all levels. We review the history, mathematical properties, and visualization of these models, their many variations, and their applications to physical systems.

  10. Pre-Service Physics Teachers' Comprehension of Quantum Mechanical Concepts

    Science.gov (United States)

    Didis, Nilufer; Eryilmaz, Ali; Erkoc, Sakir

    2010-01-01

    When quantum theory caused a paradigm shift in physics, it introduced difficulties in both learning and teaching of physics. Because of its abstract, counter-intuitive and mathematical structure, students have difficulty in learning this theory, and instructors have difficulty in teaching the concepts of the theory. This case study investigates…

  11. Effect of Camphorquinone Concentration in Physical-Mechanical Properties of Experimental Flowable Resin Composites

    Directory of Open Access Journals (Sweden)

    Dayany da Silva Alves Maciel

    2018-01-01

    Full Text Available The aim of this study was to evaluate the effect of camphorquinone concentration in physical-mechanical properties of experimental flowable composites in order to find the concentration that results in maximum conversion, balanced mechanical strength, and minimum shrinkage stress. Model composites based on BISGMA/TEGDMA with 70% wt filler loading were prepared containing different concentrations of camphorquinone (CQ on resin matrix (0.25%, 0.50%, 1%, 1.50%, and 2% by weight. Degree of conversion was determined by FTIR. Surface hardness was assessed before and after 24 h ethanol storage and softening rate was determined. Depth of cure was determined by Knoop hardness evaluation at different depths. Color was assessed by reflectance spectrophotometer, employing the CIE-Lab system. Flexural strength and elastic modulus were determined by a three-point bending test. Shrinkage stress was determined in a Universal Testing Machine in a high compliance system. Data were submitted to ANOVA and Tukey’s test (α = 0.05. The increase in CQ concentration caused a significant increase on flexural strength and luminosity of composites. Surface hardness was not affected by the concentration of CQ. Composite containing 0.25% wt CQ showed lower elastic modulus and shrinkage stress when compared to others. Depth of cure was 3 mm for composite containing 1% CQ and 2 mm for the other tested composites. Degree of conversion was inversely correlated with softening rate and directly correlated with elastic modulus and shrinkage stress. In conclusion, CQ concentration affects polymerization characteristics and mechanical strength of composites. The concentration of CQ in flowable composite for optimized polymerization and properties was 1% wt of the resin matrix, which allows adequate balance among degree of conversion, depth of cure, mechanical properties, and color characteristics of these materials.

  12. Seismic Methods of Identifying Explosions and Estimating Their Yield

    Science.gov (United States)

    Walter, W. R.; Ford, S. R.; Pasyanos, M.; Pyle, M. L.; Myers, S. C.; Mellors, R. J.; Pitarka, A.; Rodgers, A. J.; Hauk, T. F.

    2014-12-01

    Seismology plays a key national security role in detecting, locating, identifying and determining the yield of explosions from a variety of causes, including accidents, terrorist attacks and nuclear testing treaty violations (e.g. Koper et al., 2003, 1999; Walter et al. 1995). A collection of mainly empirical forensic techniques has been successfully developed over many years to obtain source information on explosions from their seismic signatures (e.g. Bowers and Selby, 2009). However a lesson from the three DPRK declared nuclear explosions since 2006, is that our historic collection of data may not be representative of future nuclear test signatures (e.g. Selby et al., 2012). To have confidence in identifying future explosions amongst the background of other seismic signals, and accurately estimate their yield, we need to put our empirical methods on a firmer physical footing. Goals of current research are to improve our physical understanding of the mechanisms of explosion generation of S- and surface-waves, and to advance our ability to numerically model and predict them. As part of that process we are re-examining regional seismic data from a variety of nuclear test sites including the DPRK and the former Nevada Test Site (now the Nevada National Security Site (NNSS)). Newer relative location and amplitude techniques can be employed to better quantify differences between explosions and used to understand those differences in term of depth, media and other properties. We are also making use of the Source Physics Experiments (SPE) at NNSS. The SPE chemical explosions are explicitly designed to improve our understanding of emplacement and source material effects on the generation of shear and surface waves (e.g. Snelson et al., 2013). Finally we are also exploring the value of combining seismic information with other technologies including acoustic and InSAR techniques to better understand the source characteristics. Our goal is to improve our explosion models

  13. Mecanismos adaptativos do sistema imunológico em resposta ao treinamento físico Adaptative mechanisms of the immune system in response to physical training

    Directory of Open Access Journals (Sweden)

    Carol Góis Leandro

    2007-10-01

    Full Text Available O treinamento físico, de intensidade moderada, melhora os sistemas de defesa, enquanto que o treinamento intenso causa imunossupressão. Os mecanismos subjacentes estão associados à comunicação entre os sistemas nervoso, endócrino e imunológico, sugerindo vias autonômicas e modulação da resposta imune. Células do sistema imune, quando expostas a pequenas cargas de estresse, desenvolvem mecanismo de tolerância. Em muitos tecidos tem-se demonstrado que a resposta a situações agressivas parece ser atenuada pelo treinamento físico aplicado previamente, isto é, o treinamento induz tolerância para situações agressivas/estressantes. Nesta revisão são relatados estudos sugerindo os mecanismos adaptativos do sistema imunológico em resposta ao treinamento físico.Moderate physical training enhances the defense mechanisms, while intense physical training induces to immune suppression. The underlying mechanisms are associated with the link between nervous, endocrine, and immune systems. It suggests autonomic patterns and modulation of immune response. Immune cells, when exposed to regular bouts of stress, develop a mechanism of tolerance. In many tissues, it has been demonstrated that the response to aggressive conditions is attenuated by moderate physical training. Thus, training can induce tolerance to aggressive/stressful situations. In this review, studies suggesting the adaptation mechanisms of the immune system in response to physical training will be reported.

  14. Advances in Soft Matter Mechanics

    CERN Document Server

    Li, Shaofan

    2012-01-01

    "Advances in Soft Matter Mechanics" is a compilation and selection of recent works in soft matter mechanics by a group of active researchers in the field. The main objectives of this book are first to disseminate the latest developments in soft matter mechanics in the field of applied and computational mechanics, and second to introduce soft matter mechanics as a sub-discipline of soft matter physics. As an important branch of soft matter physics, soft matter mechanics has developed rapidly in recent years. A number of the novel approaches discussed in this book are unique, such as the coarse grained finite element method for modeling colloidal adhesion, entropic elasticity, meshfree simulations of liquid crystal elastomers, simulations of DNA, etc. The book is intended for researchers and graduate students in the field of mechanics, condensed matter physics and biomaterials. Dr. Shaofan Li is a professor of the University of California-Berkeley, U.S.A; Dr. Bohua Sun is a professor of Cape Peninsula Universit...

  15. Can Pre-Service Physical Education Majors Identify Learning Standards during Authentic Teaching Episodes?

    Science.gov (United States)

    Kniffin, Mike; Foley, John; MacDonald, Lynn Couturier; Howarth, Kath

    2014-01-01

    Only a handful of research studies have been conducted to determine whether or not physical educators or pre-service physical education teachers are utilizing learning standards in their teaching. While pre-service teachers are typically required to align lesson objectives and content, their extent of their understanding of how learning standards…

  16. Quantum physics and statistical physics. 5. ed.

    International Nuclear Information System (INIS)

    Alonso, Marcelo; Finn, Edward J.

    2012-01-01

    By logical and uniform presentation this recognized introduction in modern physics treats both the experimental and theoretical aspects. The first part of the book deals with quantum mechanics and their application to atoms, molecules, nuclei, solids, and elementary particles. The statistical physics with classical statistics, thermodynamics, and quantum statistics is theme of the second part. Alsonso and Finn avoid complicated mathematical developments; by numerous sketches and diagrams as well as many problems and examples they make the reader early and above all easily understandably familiar with the formations of concepts of modern physics.

  17. Classical Mechanics as Nonlinear Quantum Mechanics

    International Nuclear Information System (INIS)

    Nikolic, Hrvoje

    2007-01-01

    All measurable predictions of classical mechanics can be reproduced from a quantum-like interpretation of a nonlinear Schroedinger equation. The key observation leading to classical physics is the fact that a wave function that satisfies a linear equation is real and positive, rather than complex. This has profound implications on the role of the Bohmian classical-like interpretation of linear quantum mechanics, as well as on the possibilities to find a consistent interpretation of arbitrary nonlinear generalizations of quantum mechanics

  18. Bronchopulmonary hygiene physical therapy in bronchiectasis and chronic obstructive pulmonary disease: a systematic review.

    Science.gov (United States)

    Jones, A; Rowe, B H

    2000-01-01

    This study had two objectives: (1) to examine the effects of bronchopulmonary hygiene physical therapy on patients with chronic obstructive pulmonary disease and bronchiectasis; (2) to determine any differences between manual and mechanical techniques for bronchopulmonary hygiene physical therapy. The study design was a systematic review of the literature that used an exhaustive search for trials and review methods prescribed by the Cochrane Collaboration. Randomized controlled trials examined patient groups, interventions, and dependent variables. Patients included those with chronic obstructive pulmonary diseases (emphysema or chronic bronchitis) or bronchiectasis. Any of the following interventions or combinations thereof were included: manual interventions, such as postural drainage, chest percussion, vibration, chest shaking, directed coughing, or forced exhalation technique. Controls of the study were as follows: no intervention; placebo; coughing; and mechanical interventions, such as mechanical vibration. The search identified 99 potential trials; inclusion or exclusion analysis left 7, which examined a total of 126 patients. Mean score on trial quality was 1.4 (5 = greatest). Three separate trials (N = 51) found statistically significant effects for bronchopulmonary hygiene physical therapy on sputum production and radioaerosol clearance. No trials (N = 126) found statistically significant effects on pulmonary function variables or differences between manual and mechanical techniques. Considering the small sizes, low quality, and mixed results from the trials, the research on bronchopulmonary hygiene physical therapy is inconclusive. There is a need for adequately sized, high-quality, randomized controlled trials with uniform patient populations to examine the effects of bronchopulmonary hygiene physical therapy.

  19. Performance differences between male and female marines on standardized physical fitness tests and combat proxy tasks: identifying the gap.

    Science.gov (United States)

    Jameson, Jason; Pappa, Leon; McGuire, Brian; Kelly, Karen R

    2015-01-01

    For decades women have been restricted from direct assignment to certain military occupational specialties such as infantry. These restrictions can limit the advancement of women through the ranks of military leadership. Thus, the purpose of this effort was to identify those physical requirements most likely to serve as barriers for women wanting to enter closed combat arms positions, and to evaluate the quality of existing physical fitness tests as potential measures of assessment of combat readiness. Data were collected from 3 different sites within the US Marine Corps Training and Education Command. All participants (409 male, 379 femaile) were active-duty Marines who recently completed the Physical Fitness Test (PFT) and Combat Fitness Test (CFT). Participants completed 6 physical tasks: 120-mm tank loading drill, 155-mm artillery round carry, negotiating an obstacle course wall while wearing a fighting load (≈30 lb), pull-ups, deadlift, and clean and press. Overall, there was a high rate of successful completion on the combat proxy tasks (men, ≈80% to 100%; women, ≈70% to 100%), with the notable exception being the clean and press (men, 80%; women, 9%) and pull-ups (men, 16±4; women, 4±2). The PFT and CFT components tasks were also related, strongly in some cases, with performance on combat-related proxy tasks (Spearman's ρ typically ranged from 0.60 to 0.80). Estimates of fat-free mass and VO2max were also strongly related to an overall measure of combat readiness (Spearman's ρ=0.77 and ρ=0.56, respectively). The primary physical obstacle for women is upper body strength. However, some women could successfully complete all of the proxy tasks and thus are physically capable of meeting the demands of closed combat occupations. The fact that some female Marines could complete the most challenging upper body strength tasks suggests that these barriers are not inherent but may be due to a lack of training specificity.

  20. Continuum mechanics

    CERN Document Server

    Spencer, A J M

    2004-01-01

    The mechanics of fluids and the mechanics of solids represent the two major areas of physics and applied mathematics that meet in continuum mechanics, a field that forms the foundation of civil and mechanical engineering. This unified approach to the teaching of fluid and solid mechanics focuses on the general mechanical principles that apply to all materials. Students who have familiarized themselves with the basic principles can go on to specialize in any of the different branches of continuum mechanics. This text opens with introductory chapters on matrix algebra, vectors and Cartesian ten

  1. Identifying Green Infrastructure as a Basis for an Incentive Mechanism at the Municipality Level in Biscay (Basque Country

    Directory of Open Access Journals (Sweden)

    Gloria Rodríguez-Loinaz

    2018-01-01

    Full Text Available The contributions of green infrastructure (GI to human well-being have been widely recognised; however, pathways for its systematic implementation are missing. Local governments can play a crucial role in the conservation of GI, and a formal recognition of this role in budgeting systems would foster the inclusion of GI in their agenda. The aim of this study is to identify the principal components of GI at the local level to form a basis for a compensatory economic scheme. We identified the principal components of GI based on the mapping of biodiversity conservation and ecosystem services provision. Furthermore, we analysed the potentiality of an incentive mechanism to promote GI based on the protection status of GI. Finally, an incentive mechanism to promote GI at the municipality level was proposed. The results showed that the GI of Biscay is mainly composed of the natural forests presented in the area, and that 50% of the principal components of the GI are not protected. Furthermore, one third of the protected principal components of the GI only has protection at the municipality level. So, we propose a Payment for Ecosystem Services (PES-like scheme at the municipality level based on the cover of natural forests, where the objective is the conservation and promotion of the GI.

  2. Mechanical Kinesiology.

    Science.gov (United States)

    Barham, Jerry N.

    Mechanical kinesiology is defined as a study of the mechanical factors affecting human movement, i.e., applying the physical laws of mechanics to the study of human motor behavior. This textbook on the subject is divided into thirty lessons. Each lesson is organized into three parts: a part on the text proper; a part entitled "study…

  3. Bohmian mechanics. The physics and mathematics of quantum theory

    International Nuclear Information System (INIS)

    Duerr, Detlef; Teufel, Stefan

    2009-01-01

    Bohmian Mechanics was formulated in 1952 by David Bohm as a complete theory of quantum phenomena based on a particle picture. It was promoted some decades later by John S. Bell, who, intrigued by the manifestly nonlocal structure of the theory, was led to his famous Bell's inequalities. Experimental tests of the inequalities verified that nature is indeed nonlocal. Bohmian mechanics has since then prospered as the straightforward completion of quantum mechanics. This book provides a systematic introduction to Bohmian mechanics and to the mathematical abstractions of quantum mechanics, which range from the self-adjointness of the Schroedinger operator to scattering theory. It explains how the quantum formalism emerges when Boltzmann's ideas about statistical mechanics are applied to Bohmian mechanics. The book is self-contained, mathematically rigorous and an ideal starting point for a fundamental approach to quantum mechanics. It will appeal to students and newcomers to the field, as well as to established scientists seeking a clear exposition of the theory. (orig.)

  4. Bohmian mechanics. The physics and mathematics of quantum theory

    Energy Technology Data Exchange (ETDEWEB)

    Duerr, Detlef [Muenchen Univ. (Germany). Fakultaet Mathematik; Teufel, Stefan [Tuebingen Univ. (Germany). Mathematisches Inst.

    2009-07-01

    Bohmian Mechanics was formulated in 1952 by David Bohm as a complete theory of quantum phenomena based on a particle picture. It was promoted some decades later by John S. Bell, who, intrigued by the manifestly nonlocal structure of the theory, was led to his famous Bell's inequalities. Experimental tests of the inequalities verified that nature is indeed nonlocal. Bohmian mechanics has since then prospered as the straightforward completion of quantum mechanics. This book provides a systematic introduction to Bohmian mechanics and to the mathematical abstractions of quantum mechanics, which range from the self-adjointness of the Schroedinger operator to scattering theory. It explains how the quantum formalism emerges when Boltzmann's ideas about statistical mechanics are applied to Bohmian mechanics. The book is self-contained, mathematically rigorous and an ideal starting point for a fundamental approach to quantum mechanics. It will appeal to students and newcomers to the field, as well as to established scientists seeking a clear exposition of the theory. (orig.)

  5. Stochastic mechanics and quantum theory

    International Nuclear Information System (INIS)

    Goldstein, S.

    1987-01-01

    Stochastic mechanics may be regarded as both generalizing classical mechanics to processes with intrinsic randomness, as well as providing the sort of detailed description of microscopic events declared impossible under the traditional interpretation of quantum mechanics. It avoids the many conceptual difficulties which arise from the assumption that quantum mechanics, i.e., the wave function, provides a complete description of (microscopic) physical reality. Stochastic mechanics presents a unified treatment of the microscopic and macroscopic domains, in which the process of measurement plays no special physical role and which reduces to Newtonian mechanics in the macroscopic limit

  6. Physics of Limiting Phenomena in Superconducting Microwave Resonators: Vortex Dissipation, Ultimate Quench and Quality Factor Degradation Mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    Checchin, Mattia [Illinois Inst. of Technology, Chicago, IL (United States)

    2016-12-01

    Superconducting niobium accelerating cavities are devices operating in radio-frequency and able to accelerate charged particles up to energy of tera-electron-volts. Such accelerating structures are though limited in terms of quality factor and accelerating gradient, that translates--in some cases--in higher capital costs of construction and operation of superconducting rf accelerators. Looking forward for a new generation of more affordable accelerators, the physical description of limiting mechanisms in superconducting microwave resonators is discussed. In particular, the physics behind the dissipation introduced by vortices in the superconductor, the ultimate quench limitations and the quality factor degradation mechanism after a quench are described in detail. One of the limiting factor of the quality factor is the dissipation introduced by trapped magnetic flux vortices. The radio-frequency complex response of trapped vortices in superconductors is derived by solving the motion equation for a magnetic flux line, assuming a bi-dimensional and mean free path-dependent Lorentzian-shaped pinning potential. The resulting surface resistance shows the bell-shaped trend as a function of the mean free path, in agreement with the experimental data observed. Such bell-shaped trend of the surface resistance is described in terms of the interplay of the two limiting regimes identified as pinning and flux flow regimes, for low and large mean free path values respectively. The model predicts that the dissipation regime--pinning- or flux-flow-dominated--can be tuned either by acting on the frequency or on the electron mean free path value. The effect of different configurations of pinning sites and strength on the vortex surface resistance are also discussed. Accelerating cavities are also limited by the quench of the superconductive state, which limits the maximum accelerating gradient achievable. The accelerating field limiting factor is usually associate d to the

  7. Physics of limiting phenomena in superconducting microwave resonators: Vortex dissipation, ultimate quench and quality factor degradation mechanisms

    Science.gov (United States)

    Checchin, Mattia

    Superconducting niobium accelerating cavities are devices operating in radiofrequency and able to accelerate charged particles up to energy of tera-electron-volts. Such accelerating structures are though limited in terms of quality factor and accelerating gradient, that translates--in some cases--in higher capital costs of construction and operation of superconducting rf accelerators. Looking forward for a new generation of more affordable accelerators, the physical description of limiting mechanisms in superconducting microwave resonators is discussed. In particular, the physics behind the dissipation introduced by vortices in the superconductor, the ultimate quench limitations and the quality factor degradation mechanism after a quench are described in detail. One of the limiting factor of the quality factor is the dissipation introduced by trapped magnetic flux vortices. The radio-frequency complex response of trapped vortices in superconductors is derived by solving the motion equation for a magnetic flux line, assuming a bi-dimensional and mean free path-dependent Lorentzian-shaped pinning potential. The resulting surface resistance shows the bell-shaped trend as a function of the mean free path, in agreement with the experimental data observed. Such bell-shaped trend of the surface resistance is described in terms of the interplay of the two limiting regimes identified as pinning and flux flow regimes, for low and large mean free path values respectively. The model predicts that the dissipation regime--pinning- or flux-flow-dominated--can be tuned either by acting on the frequency or on the electron mean free path value. The effect of different configurations of pinning sites and strength on the vortex surface resistance are also discussed. Accelerating cavities are also limited by the quench of the superconductive state, which limits the maximum accelerating gradient achievable. The accelerating field limiting factor is usually associated to the superheating

  8. Determination of the mechanical and physical properties of cartilage by coupling poroelastic-based finite element models of indentation with artificial neural networks.

    Science.gov (United States)

    Arbabi, Vahid; Pouran, Behdad; Campoli, Gianni; Weinans, Harrie; Zadpoor, Amir A

    2016-03-21

    One of the most widely used techniques to determine the mechanical properties of cartilage is based on indentation tests and interpretation of the obtained force-time or displacement-time data. In the current computational approaches, one needs to simulate the indentation test with finite element models and use an optimization algorithm to estimate the mechanical properties of cartilage. The modeling procedure is cumbersome, and the simulations need to be repeated for every new experiment. For the first time, we propose a method for fast and accurate estimation of the mechanical and physical properties of cartilage as a poroelastic material with the aid of artificial neural networks. In our study, we used finite element models to simulate the indentation for poroelastic materials with wide combinations of mechanical and physical properties. The obtained force-time curves are then divided into three parts: the first two parts of the data is used for training and validation of an artificial neural network, while the third part is used for testing the trained network. The trained neural network receives the force-time curves as the input and provides the properties of cartilage as the output. We observed that the trained network could accurately predict the properties of cartilage within the range of properties for which it was trained. The mechanical and physical properties of cartilage could therefore be estimated very fast, since no additional finite element modeling is required once the neural network is trained. The robustness of the trained artificial neural network in determining the properties of cartilage based on noisy force-time data was assessed by introducing noise to the simulated force-time data. We found that the training procedure could be optimized so as to maximize the robustness of the neural network against noisy force-time data. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Particles, fields, quanta. From quantum mechanics to the Standard Model of particle physics; Teilchen, Felder, Quanten. Von der Quantenmechanik zum Standardmodell der Teilchenphysik

    Energy Technology Data Exchange (ETDEWEB)

    Ecker, Gerhard [Wien Univ. (Austria). Fakultaet fuer Physik

    2017-07-01

    The following topics are dealt with: Physics around 1900, the way to quantum mechanics, quantum field theory with quantum electrodynamics as prototype, the crisis of quantum field theory, from the beta decay to the electroweak gauge theory, quantum chromodynamics as quantum field theory of the strong nuclear force, the standard model of the fundamental interactions, physics beyond the standard model. (HSI)

  10. Disability reconsidered: the paradox of physical therapy.

    Science.gov (United States)

    Roush, Susan E; Sharby, Nancy

    2011-12-01

    The purposes of this perspective article are: (1) to explore models of disability from the perspective of the academic discipline of disability studies (DS), (2) to consider the paradox of improving functional capacities while valuing disability as diversity, (3) to identify how physical therapy's use of the International Classification of Functioning, Disability and Health (ICF) disablement model intersects with various disability models, and (4) to apply this broader understanding of disability to physical therapist practice, education, and research. The DS literature has been critical of rehabilitation professionals, particularly targeting the medical model of disability. In contrast, advocates for a social model of disability recognize disability as diversity. It is paradoxical for physical therapy to simultaneously work to ameliorate disability while celebrating it as diversity. The ICF biopsychosocial disablement model offers a mechanism to practice within this paradox and suggests that it is no longer sufficient to conceptualize disability as a purely individual matter that requires attention in isolation from the impact of the larger society.

  11. Physical activity and its effects on reproduction.

    Science.gov (United States)

    Redman, Leanne M

    2006-05-01

    The reproductive system is tightly coupled with energy balance, and thereby changes in the status of energy balance through changes in physical activity can impact on the reproductive system. In light of the new physical activity for health recommendations, it is therefore important to understand the inherent effects, both positive and negative, of physical activity on the reproductive system. At both extremes of the energy spectrum, disorders of chronic energy excess and energy deficiency are characterized by a wide range of reproductive disorders, including menstrual irregularity, anovulation, polycystic ovarian syndrome, and infertility in women, and erectile dysfunction and altered spermatogenesis in men. Although laboratory research indicates that individuals may be able to prevent or reverse reproductive disruptions, either by increasing energy expenditure in cases of energy excess or by dietary reform in cases of energy deficits, there is an acute need for applied research to confirm this idea and to identify mechanisms by which the availability of energy per se regulates reproductive function in humans.

  12. A course in classical physics

    CERN Document Server

    Bettini, Alessandro

    This first volume covers the mechanics of point particles, gravitation, extended systems (starting from the two-body system), the basic concepts of relativistic mechanics and the mechanics of rigid bodies and fluids. The four-volume textbook, which covers electromagnetism, mechanics, fluids and thermodynamics, and waves and light, is designed to reflect the typical syllabus during the first two years of a calculus-based university physics program. Throughout all four volumes, particular attention is paid to in-depth clarification of conceptual aspects, and to this end the historical roots of the principal concepts are traced. Writings by the founders of classical mechanics, G. Galilei and I. Newton, are reproduced, encouraging students to consult them. Emphasis is also consistently placed on the experimental basis of the concepts, highlighting the experimental nature of physics. Whenever feasible at the elementary level, concepts relevant to more advanced courses in modern physics are included. Each chapter b...

  13. Defended to the Nines: 25 Years of Resistance Gene Cloning Identifies Nine Mechanisms for R Protein Function[OPEN

    Science.gov (United States)

    2018-01-01

    Plants have many, highly variable resistance (R) gene loci, which provide resistance to a variety of pathogens. The first R gene to be cloned, maize (Zea mays) Hm1, was published over 25 years ago, and since then, many different R genes have been identified and isolated. The encoded proteins have provided clues to the diverse molecular mechanisms underlying immunity. Here, we present a meta-analysis of 314 cloned R genes. The majority of R genes encode cell surface or intracellular receptors, and we distinguish nine molecular mechanisms by which R proteins can elevate or trigger disease resistance: direct (1) or indirect (2) perception of pathogen-derived molecules on the cell surface by receptor-like proteins and receptor-like kinases; direct (3) or indirect (4) intracellular detection of pathogen-derived molecules by nucleotide binding, leucine-rich repeat receptors, or detection through integrated domains (5); perception of transcription activator-like effectors through activation of executor genes (6); and active (7), passive (8), or host reprogramming-mediated (9) loss of susceptibility. Although the molecular mechanisms underlying the functions of R genes are only understood for a small proportion of known R genes, a clearer understanding of mechanisms is emerging and will be crucial for rational engineering and deployment of novel R genes. PMID:29382771

  14. Mathematical methods of classical physics

    CERN Document Server

    Cortés, Vicente

    2017-01-01

    This short primer, geared towards students with a strong interest in mathematically rigorous approaches, introduces the essentials of classical physics, briefly points out its place in the history of physics and its relation to modern physics, and explains what benefits can be gained from a mathematical perspective. As a starting point, Newtonian mechanics is introduced and its limitations are discussed. This leads to and motivates the study of different formulations of classical mechanics, such as Lagrangian and Hamiltonian mechanics, which are the subjects of later chapters. In the second part, a chapter on classical field theories introduces more advanced material. Numerous exercises are collected in the appendix.

  15. Scattering theory in quantum mechanics. Physical principles and mathematical methods

    International Nuclear Information System (INIS)

    Amrein, W.O.; Jauch, J.M.; Sinha, K.B.

    1977-01-01

    A contemporary approach is given to the classical topics of physics. The purpose is to explain the basic physical concepts of quantum scattering theory, to develop the necessary mathematical tools for their description, to display the interrelation between the three methods (the Schroedinger equation solutions, stationary scattering theory, and time dependence) to derive the properties of various quantities of physical interest with mathematically rigorous methods

  16. Effects of Static Magnetic Fields on the Physical, Mechanical, and Microstructural Properties of Cement Pastes

    Directory of Open Access Journals (Sweden)

    Juan J. Soto-Bernal

    2015-01-01

    Full Text Available This paper presents the results of an experimental study carried out to comprehend the physical, mechanical, and microstructural behavior of cement pastes subjected to static magnetic fields while hydrating and setting. The experimental methodology consisted in exposing fresh cement pastes to static magnetic fields at three different magnetic induction strengths: 19.07, 22.22, and 25.37 Gauss. The microstructural characterization makes evident that there are differences in relation to amount and morphology of CSH gel; the amount of CSH is larger and its morphology becomes denser and less porous with higher magnetostatic induction strengths; it also shows the evidence of changes in the mineralogical composition of the hydrated cement pastes. The temperature increasing has no negative effects over the cement paste compressive strength since the magnetostatic field affects the process of hydration through a molecular restructuring process, which makes cement pastes improve microstructurally, with a reduced porosity and a higher mechanical strength.

  17. Effect of an admixture from Agave americana on the physical and mechanical properties of plaster

    Directory of Open Access Journals (Sweden)

    Ochoa, J. C.

    2013-03-01

    Full Text Available Physical and mechanical properties of a plaster paste added with an organic admixture, of the leaves of Agave americana, were studied. Plastic consistency behavior was evaluated and the water/gypsum(w/g ratio was determined for each dosage of the admixture. Admixtur eeffect on setting was evaluated too. The chemical transformation of the hemihydrated form to gypsum (dihydrated form was studied using a novel technique based on a moisture analyzer by halogen light. Flexural and compressive strengths were measured. The results show that ,for the same consistency, accordingly mechanical strengths were improved too. The setting times were increased which would enhance the application time of plaster and would reduce plastic shrinkage, common problems in this type of material. The changes in these physical properties not substantially affect the final mechanical strengths.

    Se estudiaron algunas propiedades físicas y mecánicas de pastas de yeso de construcción adicionadas con un aditivo de origen orgánico, producto de las hojas de la planta Agave americana. Se evaluó el comportamiento plástico de la pasta mediante ensayos de consistencia y se determinó, para cada dosificación, su relación agua/ yeso (a/y. Se evaluó la incidencia del aditivo en los tiempos de fraguado. La transformación química del hemihidrato a yeso dihidrato se estudió mediante una novedosa técnica basada en un analizador de humedad por luz halógena. Se midieron las resistencias mecánicas a flexo-tracción y a compresión. Los resultados del estudio muestran que, para una misma consistencia, se mejoran las resistencias mecánicas. Los tiempos de fraguado de la pasta se aumentaron lo que ayudaría mejorar los tiempos de aplicación del yeso y a disminuir las retracciones plásticas. Las modificaciones de estas propiedades físicas no afectan considerablemente las resistencias mecánicas finales.

  18. Testing Nonassociative Quantum Mechanics.

    Science.gov (United States)

    Bojowald, Martin; Brahma, Suddhasattwa; Büyükçam, Umut

    2015-11-27

    The familiar concepts of state vectors and operators in quantum mechanics rely on associative products of observables. However, these notions do not apply to some exotic systems such as magnetic monopoles, which have long been known to lead to nonassociative algebras. Their quantum physics has remained obscure. This Letter presents the first derivation of potentially testable physical results in nonassociative quantum mechanics, based on effective potentials. They imply new effects which cannot be mimicked in usual quantum mechanics with standard magnetic fields.

  19. Physics colloquium: Single-electron counting in quantum metrology and in statistical mechanics

    CERN Multimedia

    Geneva University

    2011-01-01

    GENEVA UNIVERSITY Ecole de physique Département de physique nucléaire et corspusculaire 24, quai Ernest-Ansermet 1211 Genève 4 Tél.: (022) 379 62 73 Fax: (022) 379 69 92olé   Lundi 17 octobre 2011 17h00 - Ecole de Physique, Auditoire Stueckelberg PHYSICS COLLOQUIUM « Single-electron counting in quantum metrology and in statistical mechanics » Prof. Jukka Pekola Low Temperature Laboratory, Aalto University Helsinki, Finland   First I discuss the basics of single-electron tunneling and its potential applications in metrology. My main focus is in developing an accurate source of single-electron current for the realization of the unit ampere. I discuss the principle and the present status of the so-called single- electron turnstile. Investigation of errors in transporting electrons one by one has revealed a wealth of observations on fundamental phenomena in mesoscopic superconductivity, including individual Andreev...

  20. Quantum mechanics & the big world

    NARCIS (Netherlands)

    Wezel, Jasper van

    2007-01-01

    Quantum Mechanics is one of the most successful physical theories of the last century. It explains physical phenomena from the smallest to the largest lengthscales. Despite this triumph, quantum mechanics is often perceived as a mysterious theory, involving superposition states that are alien to our

  1. 21 CFR 890.3100 - Mechanical chair.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Mechanical chair. 890.3100 Section 890.3100 Food... DEVICES PHYSICAL MEDICINE DEVICES Physical Medicine Prosthetic Devices § 890.3100 Mechanical chair. (a) Identification. A mechanical chair is a manually operated device intended for medical purposes that is used to...

  2. Running from Disease: Molecular Mechanisms Associating Dopamine and Leptin Signaling in the Brain with Physical Inactivity, Obesity, and Type 2 Diabetes

    Directory of Open Access Journals (Sweden)

    Gregory N. Ruegsegger

    2017-05-01

    Full Text Available Physical inactivity is a primary contributor to diseases such as obesity, cardiovascular disease, and type 2 diabetes. Accelerometry data suggest that a majority of US adults fail to perform substantial levels of physical activity needed to improve health. Thus, understanding the molecular factors that stimulate physical activity, and physical inactivity, is imperative for the development of strategies to reduce sedentary behavior and in turn prevent chronic disease. Despite many of the well-known health benefits of physical activity being described, little is known about genetic and biological factors that may influence this complex behavior. The mesolimbic dopamine system regulates motivating and rewarding behavior as well as motor movement. Here, we present data supporting the hypothesis that obesity may mechanistically lower voluntary physical activity levels via dopamine dysregulation. In doing so, we review data that suggest mesolimbic dopamine activity is a strong contributor to voluntary physical activity behavior. We also summarize findings suggesting that obesity leads to central dopaminergic dysfunction, which in turn contributes to reductions in physical activity that often accompany obesity. Additionally, we highlight examples in which central leptin activity influences physical activity levels in a dopamine-dependent manner. Future elucidation of these mechanisms will help support strategies to increase physical activity levels in obese patients and prevent diseases caused by physical inactivity.

  3. Molecular Mechanisms for High Hydrostatic Pressure-Induced Wing Mutagenesis in Drosophila melanogaster.

    Science.gov (United States)

    Wang, Hua; Wang, Kai; Xiao, Guanjun; Ma, Junfeng; Wang, Bingying; Shen, Sile; Fu, Xueqi; Zou, Guangtian; Zou, Bo

    2015-10-08

    Although High hydrostatic pressure (HHP) as an important physical and chemical tool has been increasingly applied to research of organism, the response mechanisms of organism to HHP have not been elucidated clearly thus far. To identify mutagenic mechanisms of HHP on organisms, here, we treated Drosophila melanogaster (D. melanogaster) eggs with HHP. Approximately 75% of the surviving flies showed significant morphological abnormalities from the egg to the adult stages compared with control flies (p melanogaster induced by HHP were used to investigate the mutagenic mechanisms of HHP on organism. Thus 285 differentially expressed genes associated with wing mutations were identified using Affymetrix Drosophila Genome Array 2.0 and verified with RT-PCR. We also compared wing development-related central genes in the mutant flies with control flies using DNA sequencing to show two point mutations in the vestigial (vg) gene. This study revealed the mutagenic mechanisms of HHP-induced mutagenesis in D. melanogaster and provided a new model for the study of evolution on organisms.

  4. Physics through the 1990s: Atomic, molecular, and optical physics

    International Nuclear Information System (INIS)

    1986-01-01

    This report was prepared by the Panel on Atomic, Molecular, and Optical Physics of the Physics Survey Committee in response to its charge to describe the field, to characterize the recent advances, and to identify the current frontiers of research. Some of the areas discussed are: atomic structure, atomic dynamics, accelerator-based atomic physics, molecular photoionization and electron-molecule scattering, astrophysics, laser spectroscopy, atmospheric physics, plasma physics, and applications

  5. Attitude Towards Physics and Additional Mathematics Achievement Towards Physics Achievement

    Science.gov (United States)

    Veloo, Arsaythamby; Nor, Rahimah; Khalid, Rozalina

    2015-01-01

    The purpose of this research is to identify the difference in students' attitude towards Physics and Additional Mathematics achievement based on gender and relationship between attitudinal variables towards Physics and Additional Mathematics achievement with achievement in Physics. This research focused on six variables, which is attitude towards…

  6. 21 CFR 890.3825 - Mechanical walker.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Mechanical walker. 890.3825 Section 890.3825 Food... DEVICES PHYSICAL MEDICINE DEVICES Physical Medicine Prosthetic Devices § 890.3825 Mechanical walker. (a) Identification. A mechanical walker is a four-legged device with a metal frame intended for medical purposes to...

  7. 21 CFR 890.3750 - Mechanical table.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Mechanical table. 890.3750 Section 890.3750 Food... DEVICES PHYSICAL MEDICINE DEVICES Physical Medicine Prosthetic Devices § 890.3750 Mechanical table. (a) Identification. A mechanical table is a device intended for medical purposes that has a flat surface that can be...

  8. Resistive switching in ZrO2 films: physical mechanism for filament formation and dissolution

    International Nuclear Information System (INIS)

    Parreira, Pedro; McVitie, Stephen; MacLaren, D A

    2014-01-01

    Resistive switching devices, also called memristors, have attracted much attention due to their potential memory, logic and even neuromorphic applications. Multiple physical mechanisms underpin the non-volatile switching process and are ultimately believed to give rise to the formation and dissolution of a discrete conductive filament within the active layer. However, a detailed nanoscopic analysis that fully explains all the contributory events remains to be presented. Here, we present aspects of the switching events that are correlated back to tunable details of the device fabrication process. Transmission electron microscopy and atomically resolved electron energy loss spectroscopy (EELS) studies of electrically stressed devices will then be presented, with a view to understanding the driving forces behind filament formation and dissolution

  9. Influence of alloy elements on physical and mechanical properties of single crystalline austenitic stainless steels

    International Nuclear Information System (INIS)

    Okamoto, Kazutaka; Kaneda, Junya; Yoshinari, Akira; Aono, Yasuhisa

    2000-01-01

    The single crystalline austenitic stainless steels based on 316 L were developed to improve their resistance to intergranular corrosion and stress corrosion cracking. However the mechanical properties of the single crystals were lower than those of polycrystalline. The precipitation hardening methods were applied to the single crystal for the increase of their mechanical strength by addition of niobium and heat treatments. In this paper, the influences of niobium concentration on the several physical and mechanical properties of these single crystalline austenitic stainless steels were studied. The thermal conductivity, coefficients of thermal expansion and elastic constants of the single crystals were almost the same as those of polycrystalline independently of the niobium concentration. The mechanical properties of the single crystals strongly depended on the niobium concentration and the orientation. In the specimen which contains 1.0 mass% niobium, 0.2% proof stress were remarkably improved; 370 MPa, 337 MPa and 403 MPa were obtained in , and orientations at the room temperature. The creep rupture strength and the high cycle fatigue strength were also improved by addition of niobium. In the -orientated specimen which contains 1.0 mass% niobium, the creep rupture strength at 873 K for 103 hours, 245 MPa and the high cycle fatigue strength at 773 K for 107 cycles, 220 MPa were obtained. Furthermore, the single crystalline pipe, bolts and nuts were successfully manufactured for the application of these single crystals. (author)

  10. Chimera states in mechanical oscillator networks

    DEFF Research Database (Denmark)

    Martens, Erik Andreas; Thutupalli, Shashi; Fourrière, Antoine

    2013-01-01

    of identical oscillators, numerous theoretical studies in recent years have revealed the intriguing possibility of "chimera states," in which the symmetry of the oscillator population is broken into a synchronous part and an asynchronous part. However, a striking lack of empirical evidence raises the question...... of whether chimeras are indeed characteristic of natural systems. This calls for a palpable realization of chimera states without any fine-tuning, from which physical mechanisms underlying their emergence can be uncovered. Here, we devise a simple experiment with mechanical oscillators coupled...... in a hierarchical network to show that chimeras emerge naturally from a competition between two antagonistic synchronization patterns. We identify a wide spectrum of complex states, encompassing and extending the set of previously described chimeras. Our mathematical model shows that the self-organization observed...

  11. Condensed matter physics

    CERN Document Server

    Isihara, A

    2007-01-01

    More than a graduate text and advanced research guide on condensed matter physics, this volume is useful to plasma physicists and polymer chemists, and their students. It emphasizes applications of statistical mechanics to a variety of systems in condensed matter physics rather than theoretical derivations of the principles of statistical mechanics and techniques. Isihara addresses a dozen different subjects in separate chapters, each designed to be directly accessible and used independently of previous chapters. Topics include simple liquids, electron systems and correlations, two-dimensional

  12. Nuclear and Particle Physics Simulations: The Consortium of Upper-Level Physics Software

    Science.gov (United States)

    Bigelow, Roberta; Moloney, Michael J.; Philpott, John; Rothberg, Joseph

    1995-06-01

    The Consortium for Upper Level Physics Software (CUPS) has developed a comprehensive series of Nine Book/Software packages that Wiley will publish in FY `95 and `96. CUPS is an international group of 27 physicists, all with extensive backgrounds in the research, teaching, and development of instructional software. The project is being supported by the National Science Foundation (PHY-9014548), and it has received other support from the IBM Corp., Apple Computer Corp., and George Mason University. The Simulations being developed are: Astrophysics, Classical Mechanics, Electricity & Magnetism, Modern Physics, Nuclear and Particle Physics, Quantum Mechanics, Solid State, Thermal and Statistical, and Wave and Optics.

  13. VISCOSE BASED MAGNETIC YARNS – PHYSICAL AND MECHANICAL CHARACTERIZATION

    Directory of Open Access Journals (Sweden)

    GROSU Marian-Cătălin

    2017-05-01

    Full Text Available In the context of the rapid growth in the number of electrical and electronic devices and accessories that emit electromagnetic energy in different frequency bands we present and characterize here several magnetic functionalized viscose twisted yarns. A 100% viscose twisted staple yarn was covered through an in-house developed process with a polymeric solution containing micrometric sized barium hexaferrite magnetic powder. The in-house developed process allows deposition of micrometric thickness polymeric paste layer on the yarn surface. Barium hexaferrite is a hard magnetic material exhibiting high chemical stability and corrosion resistivity, relatively large saturation and residual magnetization and microwave absorbing properties. Five different percentages of the magnetic powder in the polymer solution were used, i.e. ranging from 15 wt% to 45 wt%. Physical characterization shows a very good adherence between the highly hygroscopic viscose staple fibers and the polymeric solution that contains polyvinyl acetate and polyurethane as binders. SEM images evidenced the fact that the polymeric solution penetrated more than 1/3 of the yarn diameter. The concentration of magnetic powder in the polymeric solution has a direct influence on the coating amount, diameter and density. The mechanical characterization of the coated yarns revealed that the breaking force is increasing with increasing magnetic powder content up to o certain value and then decreased because the magnetic layer became stiffer. At the same time, the elongation at brake is decreasing.

  14. Mechanical and Physical Studies on Different Doses of Radiation Pre vulcanized Natural Rubber Latex (RVNRL)

    International Nuclear Information System (INIS)

    Syuhada Ramli; Sofian Ibrahim; Muhammad Saiful Omar; Mohd Noorwadi Mat Lazim; Khairul Hisyam Mohamed Yusof; Najib Mohammmad Zakey; Hafizuddin Maseri

    2014-01-01

    RVNRL mixture of 12 kGy (RVNRL12) and 25 kGy (RVNRL25) at different blending ratios were prepared by stirring the mixture using a magnetic stirrer RVNRL at a speed of 1-3 rpm overnight to get the dough consistency. RVNRL12 with RVNRL25 attendance at a ratio of 90:10, 80:20, 70:30, 60:40 and 50:50 investigated. The study of physical and mechanical properties of 12/ 25 blends RVNRL performed on film samples prepared by immersion method coagulant. RVNRL25 result of the addition of the mixture RVNRL12 showed an increase in tensile strength mixture ratio of 90:10 RVNRL12 / RVNRL25 and tensile strength are declining at a ratio higher RVNRL25 content. Increase the tensile strength was found to increase due to the impact of lower doses of dough RVNRL12 and RVNRL25. This shows that blending RVNRL lower doses help improve the physical properties of latex due to exposure dose exceeding the dose required RVNRL. (author)

  15. Characteristic of bioplastic’s physical and mechanical (Study on Tapioca Concentration and Composition Mixture of Plasticizer

    Directory of Open Access Journals (Sweden)

    Bambang Admadi Harsojuwono

    2016-03-01

    Full Text Available This study aims to (1 the effect of the concentration of starch and  ratio mixture of plasticizer to the physical and mechanical characteristics of bioplastics (2 determine the concentration of starch and plasticizer RATIO mixture  that results in physical and mechanical characteristics of bio plastics best. The experiment was conducted using a factorial randomized block design. The first factor is the concentration of tapioca consisting of 3 levels 4%, 5% and 6% (w / w. The second factor is the   mixture plasticizer ratio  of glycerol and sorbitol   consisting of 5 levels ie (100: 0%, (95: 5%, (90:10%, (85:15%, (80:20% b / b. Each combination of treatments classified into 2 time  processing bio plastics, so there are 30 experimental units. Variables observed water content, elongation at break, tensile strength and Young's modulus . The data obtained were analyzed of variant and  test of Duncan's. The results showed that the concentration of tapioca and  mixture plasticizer had no effect on water content but significant effect on the elongation at break, tensile strength and Young's modulus. The concentration of starch 6% with a ratio of mixture of plasticizers glycerol: sorbitol ( 100: 0 produces the best characteristics of bioplastics with water content of 3.98%, elongation at break of 18.75%, the tensile strength of 930 MPa and a Young's modulus of 50 MPa.

  16. Effects of physical attractiveness on political beliefs.

    Science.gov (United States)

    Peterson, Rolfe Daus; Palmer, Carl L

    2017-01-01

    Physical attractiveness is an important social factor in our daily interactions. Scholars in social psychology provide evidence that attractiveness stereotypes and the "halo effect" are prominent in affecting the traits we attribute to others. However, the interest in attractiveness has not directly filtered down to questions of political behavior beyond candidates and elites. Utilizing measures of attractiveness across multiple surveys, we examine the relationship between attractiveness and political beliefs. Controlling for socioeconomic status, we find that more attractive individuals are more likely to report higher levels of political efficacy, identify as conservative, and identify as Republican. These findings suggest an additional mechanism for political socialization that has further implications for understanding how the body intertwines with the social nature of politics.

  17. Fluid Mechanics.

    Science.gov (United States)

    Drazin, Philip

    1987-01-01

    Outlines the contents of Volume II of "Principia" by Sir Isaac Newton. Reviews the contributions of subsequent scientists to the physics of fluid dynamics. Discusses the treatment of fluid mechanics in physics curricula. Highlights a few of the problems of modern research in fluid dynamics. Shows that problems still remain. (CW)

  18. Photodegradation of polymers physical characteristics and applications

    CERN Document Server

    Rabek, Jan F

    1996-01-01

    In this book on physical characteristics and practical aspects of polymer photodegradation Rabek emphasizes the experimental work on the subject. The most important feature of the book is the physical interpretation of polymer degradation, e.g. mechanism of UV/light absorption, formation of excited states, energy transfer mechanism, kinetics, dependence on physical properties of macromolecules and polymer matrices, formation of mechanical defects, practics during environmental ageing. He includes also some aspects of polymer photodegradation in environmental and space condition.

  19. Randomness in quantum mechanics: philosophy, physics and technology.

    Science.gov (United States)

    Bera, Manabendra Nath; Acín, Antonio; Kuś, Marek; Mitchell, Morgan W; Lewenstein, Maciej

    2017-12-01

    This progress report covers recent developments in the area of quantum randomness, which is an extraordinarily interdisciplinary area that belongs not only to physics, but also to philosophy, mathematics, computer science, and technology. For this reason the article contains three parts that will be essentially devoted to different aspects of quantum randomness, and even directed, although not restricted, to various audiences: a philosophical part, a physical part, and a technological part. For these reasons the article is written on an elementary level, combining simple and non-technical descriptions with a concise review of more advanced results. In this way readers of various provenances will be able to gain while reading the article.

  20. Randomness in quantum mechanics: philosophy, physics and technology

    Science.gov (United States)

    Nath Bera, Manabendra; Acín, Antonio; Kuś, Marek; Mitchell, Morgan W.; Lewenstein, Maciej

    2017-12-01

    This progress report covers recent developments in the area of quantum randomness, which is an extraordinarily interdisciplinary area that belongs not only to physics, but also to philosophy, mathematics, computer science, and technology. For this reason the article contains three parts that will be essentially devoted to different aspects of quantum randomness, and even directed, although not restricted, to various audiences: a philosophical part, a physical part, and a technological part. For these reasons the article is written on an elementary level, combining simple and non-technical descriptions with a concise review of more advanced results. In this way readers of various provenances will be able to gain while reading the article.