Statistical Analyses of Scatterplots to Identify Important Factors in Large-Scale Simulations

Energy Technology Data Exchange (ETDEWEB)

Kleijnen, J.P.C.; Helton, J.C.

1999-04-01

The robustness of procedures for identifying patterns in scatterplots generated in Monte Carlo sensitivity analyses is investigated. These procedures are based on attempts to detect increasingly complex patterns in the scatterplots under consideration and involve the identification of (1) linear relationships with correlation coefficients, (2) monotonic relationships with rank correlation coefficients, (3) trends in central tendency as defined by means, medians and the Kruskal-Wallis statistic, (4) trends in variability as defined by variances and interquartile ranges, and (5) deviations from randomness as defined by the chi-square statistic. The following two topics related to the robustness of these procedures are considered for a sequence of example analyses with a large model for two-phase fluid flow: the presence of Type I and Type II errors, and the stability of results obtained with independent Latin hypercube samples. Observations from analysis include: (1) Type I errors are unavoidable, (2) Type II errors can occur when inappropriate analysis procedures are used, (3) physical explanations should always be sought for why statistical procedures identify variables as being important, and (4) the identification of important variables tends to be stable for independent Latin hypercube samples.

Investigations regarding the lowering of specific intellectual property risks identified in the production process

Directory of Open Access Journals (Sweden)

Pakocs Ramona

2017-01-01

Full Text Available The main purpose of this research is to decrease the emergence of specific intellectual property risks within the production process as well as increasing risk management performance of IP by preventing them. In order to achieve this, previous studies regarding the main specific intellectual property risks from industrial companies were analyzed together with their managerial methods as well as the possibility of reducing their emergence. As a result of the research conducted were identified five types of intellectual property risks that have a high potential of emergence in the production process, namely: the risk of production of goods in violation of IP rights; the know-how, production knowledge and trade secret disclosure risk; the technological risk of unprotected utility models; the technological risk of unprotected integrated circuits topographies and finally the risk of product counterfeit. In order to achieve the main purpose of our investigation, we have proposed new formulas for estimating the specific intellectual property risks identified in the production process. Their purpose was to minimalize the risk’s negative effects on industrial companies and to increase the managerial performance from the intellectual property domain through a new type of management appropriately named: intellectual property management. The research is finalized with a case study regarding the lapse of rights of a patented invention. Based on a case analysis, it was proved that the exploitation of an invention without a contract represents a counterfeit.

Important physical properties of peat materials

Science.gov (United States)

D.H. Boelter

1968-01-01

Peat materials from 12 bogs in northern Minnesota, U.S.A., showed significant differences in physical properties. It is pointed out that 1) these properties can be related to the hydrology of organic soils only if the soils represent undisturbed field conditions, and 2) volumetric expressions of water content are necessary to correctly evaluate the amount of water in a...

Intellectual property enforcement at the EU border: the challenge of private imports

DEFF Research Database (Denmark)

Petersen, Clement Salung; Riis, Thomas; Schovsbo, Jens Hemmingsen

2012-01-01

commercial importers of counterfeit and pirated goods, a consumer who imports such goods for his or her private use does not infringe any intellectual property rights (IPR). This article discusses how and to what extent right holders may nonetheless use the Customs Regulation to enforce their IPR against...... private imports. After having dismissed the so-called “manufacturing fiction” following the decision of the ECJ in Philips/Nokia the article elaborates on an alternative method which is called the “infringing sale of goods-“approach and which may find support in the ECJ decision in L'Oréal and possibly...

Identify the Important Decision Factors of Online Shopping Adoption in Indonesia

Directory of Open Access Journals (Sweden)

Lailatul HIJRAH

2017-12-01

Full Text Available The objective of this study is to identify factors encouraging a consumer to engage in online shopping activities. The expected contribution of this study is for online entrepreneurs, in order to develop the most suitable business strategy, so that it will be clearly identified and sorted out which factors are the most important and the main motivation of Indonesian consumers to shop via online by using responses from respondents who usually shop online and offline in 3 cities in Indonesia, Jakarta, Surabaya and Samarinda. The research instruments were developed by conducting FGDs on relevant groups, either academics, online shopping activists, suppliers and courier businessmen in Jakarta, Surabaya and Samarinda Cities in effort to extract any information that encourages consumers to online shopping. After conducting FGD, the researcher produced 48 items proposed for factor analysis and after extracted to form eleven constructs, some items were removed because they had less loading factors. The eleven constructs or dimensions are trust, risk, consumer factors, website factors, price, service quality, convenience, subjective norm, product guarantee, variety of products and lifestyle. The implications of this study provide valuable insights about consumer decisions to online shopping or not online shopping.

The Importance of identifiers: IWGSC Meeting 20170720

OpenAIRE

Haak, Laurel

2017-01-01

Presentation by Laure Haak at the 20 July 2017 meeting of the IWGSC, about use of identifiers in connecting researchers, funding, facilities, and publications. Description of approach and initial results of User Facilities and Publications Working Group, and applications for Scientific Collections.

Influence of biodiesel blending on physicochemical properties and importance of mathematical model for predicting the properties of biodiesel blend

International Nuclear Information System (INIS)

Wakil, M.A.; Kalam, M.A.; Masjuki, H.H.; Atabani, A.E.; Rizwanul Fattah, I.M.

2015-01-01

Highlights: • Short identification of selected biodiesel feedstock. • Review of physicochemical properties for blended biodiesel. • Mathematical model for predicting properties of various biodiesel blends. - Abstract: The growing demand for green world serves as one of the most significant challenges of modernization. Requirements like largest usage of energy for modern society as well as demand for friendly milieu create a deep concern in field of research. Biofuels are placed at the peak of the research arena for their underlying benefits as mentioned by multiple researches. Out of a number of vegetable oils, only a few are used commercially for biodiesel production. Due to various limitations of edible oil, non-edible oils are becoming a profitable choice. Till today, very little percentage of biodiesel is used successfully in engine. The research is still continuing for improving the biodiesel usage level. Recently, it is found that the blended biodiesel from more than one feedstock provides better performance in engine. This paper reviews the physicochemical properties of different biodiesel blends obtained from various feedstocks with a view to properly understand the fuel quality. Moreover, a short description of each feedstock is given along with graphical presentation of important properties for various blend percentages from B0 to B100. Finally, mathematical model is formed for predicting various properties of biodiesel blend with the help of different research data by using polynomial curve fitting method. The results obtained from a number of literature based on this work shows that the heating value of biodiesel is about 11% lower than diesel except coconut (14.5% lower) whereas kinematic viscosity is in the range of 4–5.4 mm 2 /s. Flash point of all biodiesels are more than 150 °C, except neem and coconut. Cold flow properties of calophyllum, palm, jatropha, moringa are inferior to others. This would help to determine important properties of

Identifying the molecular functions of electron transport proteins using radial basis function networks and biochemical properties.

Science.gov (United States)

Le, Nguyen-Quoc-Khanh; Nguyen, Trinh-Trung-Duong; Ou, Yu-Yen

2017-05-01

The electron transport proteins have an important role in storing and transferring electrons in cellular respiration, which is the most proficient process through which cells gather energy from consumed food. According to the molecular functions, the electron transport chain components could be formed with five complexes with several different electron carriers and functions. Therefore, identifying the molecular functions in the electron transport chain is vital for helping biologists understand the electron transport chain process and energy production in cells. This work includes two phases for discriminating electron transport proteins from transport proteins and classifying categories of five complexes in electron transport proteins. In the first phase, the performances from PSSM with AAIndex feature set were successful in identifying electron transport proteins in transport proteins with achieved sensitivity of 73.2%, specificity of 94.1%, and accuracy of 91.3%, with MCC of 0.64 for independent data set. With the second phase, our method can approach a precise model for identifying of five complexes with different molecular functions in electron transport proteins. The PSSM with AAIndex properties in five complexes achieved MCC of 0.51, 0.47, 0.42, 0.74, and 1.00 for independent data set, respectively. We suggest that our study could be a power model for determining new proteins that belongs into which molecular function of electron transport proteins. Copyright © 2017 Elsevier Inc. All rights reserved.

Spectroscopic properties for identifying sapphire samples from Ban Bo Kaew, Phrae Province, Thailand

Science.gov (United States)

Mogmued, J.; Monarumit, N.; Won-in, K.; Satitkune, S.

2017-09-01

Gemstone commercial is a high revenue for Thailand especially ruby and sapphire. Moreover, Phrae is a potential gem field located in the northern part of Thailand. The studies of spectroscopic properties are mainly to identify gemstone using advanced techniques (e.g. UV-Vis-NIR spectrophotometry, FTIR spectrometry and Raman spectroscopy). Typically, UV-Vis-NIR spectrophotometry is a technique to study the cause of color in gemstones. FTIR spectrometry is a technique to study the functional groups in gem-materials. Raman pattern can be applied to identify the mineral inclusions in gemstones. In this study, the natural sapphires from Ban Bo Kaew were divided into two groups based on colors including blue and green. The samples were analyzed by UV-Vis-NIR spectrophotometer, FTIR spectrometer and Raman spectroscope for studying spectroscopic properties. According to UV-Vis-NIR spectra, the blue sapphires show higher Fe3+/Ti4+ and Fe2+/Fe3+ absorption peaks than those of green sapphires. Otherwise, green sapphires display higher Fe3+/Fe3+ absorption peaks than blue sapphires. The FTIR spectra of both blue and green sapphire samples show the absorption peaks of -OH,-CH and CO2. The mineral inclusions such as ferrocolumbite and rutile in sapphires from this area were observed by Raman spectroscope. The spectroscopic properties of sapphire samples from Ban Bo Kaew, Phrae Province, Thailand are applied to be the specific evidence for gemstone identification.

Identifying the Physical Properties of Showers That Influence User Satisfaction to Aid in Developing Water-Saving Showers

Directory of Open Access Journals (Sweden)

Minami Okamoto

2015-07-01

Full Text Available This research was conducted with the goal of clarifying the required conditions of water-saving showerheads. In order to this, the research analyzes the mutual relationship between water usage flow, the level of satisfaction and the physical properties of spray of showerheads. The physical properties of spray were measured using physical properties test apparatus of standard or scheme for water-saving showerheads issued in several water-saving countries, and satisfaction evaluation data was acquired through bathing experiments. The evaluated showerheads were separated into three groups according to usage water flow and the level of satisfaction. The relationships between usage water flow, the level of satisfaction and physical properties were compared. The results identified that Spray Force and Spray Force-per-Hole were physical properties that influence usage water flow. Spray force-per-hole, water volume ratio in Spray Patterns within φ 100 and φ 150, Temperature Drop and Spray Angle were identified as physical properties that influenced the level of satisfaction. The level of satisfaction and usage water flow has a spurious correlation through the physical properties of Spray Force-per-Hole and Temperature Drop. It is possible to improve the level of satisfaction independent of amount of water usage through designs that set an appropriate value for water volume ratio and Spray Angle for Spray Patterns within φ 100 and φ 150.

Determining the Most Important Soil Properties Affecting the Yield of Saffron in the Ghayenat Area

Directory of Open Access Journals (Sweden)

amir ranjbar

2016-02-01

Full Text Available Introduction: Saffron is one of the most important economic plants in the Khorasan province. Awareness of soil quality in agricultural lands is essential for the best management of lands and for obtaining maximum economic benefit. In general, plant growth is a function of environmental factors especially chemical and physical properties of soil (20. It has been demonstrated that there was a positive and high correlation between soil organic matter and saffron yield. Increasing the yield of saffron due to organic matter is probably due to soil nutrient, especially phosphorous and nitrogen and also improvement of soil physical quality (6, 28, 29. The yield of saffron in soils with high nitrogen as a result of vegetative growth is high (8. Shahandeh (6 found that most of the variation of saffron yield depends on soil properties. Due to the economic importance of saffron and the role of soil properties on saffron yield, this research was conducted to find the relationship between saffron yield and some soil physical and chemical properties, and to determine the contribution of soil properties that have the greatest impact on saffron yield in the Ghayenat area. Materials and Methods: This research was performed in 30 saffron fields (30 soil samples of the Ghayenat area (longitude 59° 10΄ 10.37˝ - 59° 11΄ 38.41˝ and latitude 33° 43΄ 35.08˝ - 33΄ 44΄ 02.78˝, which is located in the Khrasan province of Iran. In this research, 21 soil properties were regarded as the total data set (TDS. Then the principal component analysis (PCA was used to determine the most important soil properties affecting saffron yield as a minimum data set (MDS and the stepwise regression to estimate saffron yield. To estimate the yield of saffron in stepwise regression method, saffron yield was considered as a dependent variable and soil physical and chemical properties were considered to be independent variables. Results and Discussion: According to the PCA method

The contribution of nature to people: Applying concepts of values and properties to rate the management importance of natural elements.

Science.gov (United States)

Smith, Michael J; Wagner, Christian; Wallace, Ken J; Pourabdollah, Amir; Lewis, Loretta

2016-06-15

An important, and yet unresolved question in natural resource management is how best to manage natural elements and their associated values to ensure human wellbeing. Specifically, there is a lack of measurement tools to assess the contribution of nature to people. We present one approach to overcome this global issue and show that the preferred state of any system element, in terms of realising human values, is a function of element properties. Consequently, natural resource managers need to understand the nature of the relationships between element properties and values if they are to successfully manage for human wellbeing. In two case studies of applied planning, we demonstrate how to identify key element properties, quantify their relationships to priority human values, and combine this information to model the contribution of elements to human wellbeing. In one of the two case studies we also compared the modelling outputs with directly elicited stakeholder opinions regarding the importance of the elements for realising the given priority values. The two, largely congruent outputs provide additional support for the approach. The study shows that rating sets of elements on their relative overall value for human wellbeing, or utility, provides critical information for subsequent management decisions and a basis for productive new research. We consider that the described approach is broadly applicable within the domain of natural resource management. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Candidate nematicidal proteins in a new Pseudomonas veronii isolate identified by its antagonistic properties against Xiphinema index.

Science.gov (United States)

Canchignia, Hayron; Altimira, Fabiola; Montes, Christian; Sánchez, Evelyn; Tapia, Eduardo; Miccono, María; Espinoza, Daniel; Aguirre, Carlos; Seeger, Michael; Prieto, Humberto

2017-03-17

The nematode Xiphinema index affects grape vines and transmits important viruses associated with fanleaf degeneration. Pseudomonas spp. are an extensive bacterial group in which important biodegradation and/or biocontrol properties can occur for several strains in the group. The aim of this study was to identify new Pseudomonas isolates with antagonist activity against X. index. Forty bacterial isolates were obtained from soil and root samples from Chilean vineyards. Thirteen new fluorescent pseudomonads were found and assessed for their antagonistic capability. The nematicide Pseudomonas protegens CHA0 was used as a control. Challenges of nematode individuals in King's B semi-solid agar Petri dishes facilitated the identification of the Pseudomonas veronii isolate R4, as determined by a 16S rRNA sequence comparison. This isolate was as effective as CHA0 as an antagonist of X. index, although it had a different lethality kinetic. Milk-induced R4 cultures exhibited protease and lipase activities in cell supernatants using both gelatin/tributyrin Petri dish assays and zymograms. Three proteins with these activities were isolated and subjected to mass spectrometry. Amino acid partial sequences enabled the identification of a 49-kDa protease similar to metalloprotease AprA and two lipases of 50 kDa and 69 kDa similar to LipA and ExoU, respectively. Electron microscopy analyses of challenged nematodes revealed degraded cuticle after R4 supernatant treatment. These results represent a new and unexplored property in this species associated with the presence of secretable lipases and protease, similar to characterized enzymes present in biocontrol pseudomonads.

Applying network theory to animal movements to identify properties of landscape space use.

Science.gov (United States)

Bastille-Rousseau, Guillaume; Douglas-Hamilton, Iain; Blake, Stephen; Northrup, Joseph M; Wittemyer, George

2018-04-01

Network (graph) theory is a popular analytical framework to characterize the structure and dynamics among discrete objects and is particularly effective at identifying critical hubs and patterns of connectivity. The identification of such attributes is a fundamental objective of animal movement research, yet network theory has rarely been applied directly to animal relocation data. We develop an approach that allows the analysis of movement data using network theory by defining occupied pixels as nodes and connection among these pixels as edges. We first quantify node-level (local) metrics and graph-level (system) metrics on simulated movement trajectories to assess the ability of these metrics to pull out known properties in movement paths. We then apply our framework to empirical data from African elephants (Loxodonta africana), giant Galapagos tortoises (Chelonoidis spp.), and mule deer (Odocoileous hemionus). Our results indicate that certain node-level metrics, namely degree, weight, and betweenness, perform well in capturing local patterns of space use, such as the definition of core areas and paths used for inter-patch movement. These metrics were generally applicable across data sets, indicating their robustness to assumptions structuring analysis or strategies of movement. Other metrics capture local patterns effectively, but were sensitive to specified graph properties, indicating case specific applications. Our analysis indicates that graph-level metrics are unlikely to outperform other approaches for the categorization of general movement strategies (central place foraging, migration, nomadism). By identifying critical nodes, our approach provides a robust quantitative framework to identify local properties of space use that can be used to evaluate the effect of the loss of specific nodes on range wide connectivity. Our network approach is intuitive, and can be implemented across imperfectly sampled or large-scale data sets efficiently, providing a

Identifying potential heirs properties in the Southeastern United States: a new GIS methodology utilizing mass appraisal data

Science.gov (United States)

Scott Pippin; Shana Jones; Cassandra. Johnson Gaither

2017-01-01

This report presents a methodology for identifying land parcels that have an increased probability of being heirs property. Heirs property is inherited land passed to successive generations intestate, without clear title, typically to family members. This land ownership type is widespread among rural, African-American populations and is also thought to be pervasive in...

41 CFR 102-75.75 - What is the most important consideration in evaluating a proposed transfer of excess real property?

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What is the most... Guidelines § 102-75.75 What is the most important consideration in evaluating a proposed transfer of excess real property? In every case of a proposed transfer of excess real property, the most important...

NRC Information No. 90-01: Importance of proper response to self-identified violations by licensees

International Nuclear Information System (INIS)

Cunningham, R.E.

1992-01-01

NRC expects a high standard of compliance by its licensees and requires that licensees provide NRC accurate and complete information and that required records will also be complete and accurate in all material respects. Licensees should be aware of the importance placed by NRC on licensee programs for self detection, correction and reporting of violations or errors related to regulatory requirements. The General Statement of Policy and Procedures for NRC Enforcement Actions in Appendix C to 10 CFR Part 2 underscores the importance of licensees responding promptly and properly to self-identified violations in two ways. It is suggested that when a licensee identifies a violation involving an NRC-required record, the licensee should make a dated notation indicating identification, either on the record itself or other appropriate documentation retrievable for NRC review. The record with the self-identified violation noted should not be altered in any way to mask the correction. The licensee should determine the cause of the violation, correct the root cause of the violation, and document such findings in an appropriate manner. Licensees should also assure that if a report of the violation is required, the report is submitted to NRC in a timely manner. These actions will be considered by NRC in making any enforcement decision, and generally lead to lesser or no civil penalty

On the importance of identifying, characterizing, and predicting fundamental phenomena towards microbial electrochemistry applications.

Science.gov (United States)

Torres, César Iván

2014-06-01

The development of microbial electrochemistry research toward technological applications has increased significantly in the past years, leading to many process configurations. This short review focuses on the need to identify and characterize the fundamental phenomena that control the performance of microbial electrochemical cells (MXCs). Specifically, it discusses the importance of recent efforts to discover and characterize novel microorganisms for MXC applications, as well as recent developments to understand transport limitations in MXCs. As we increase our understanding of how MXCs operate, it is imperative to continue modeling efforts in order to effectively predict their performance, design efficient MXC technologies, and implement them commercially. Thus, the success of MXC technologies largely depends on the path of identifying, understanding, and predicting fundamental phenomena that determine MXC performance. Copyright © 2013 Elsevier Ltd. All rights reserved.

Use of amplified fragment length polymorphism analysis to identify medically important Candida spp., including C-dubliniensis

NARCIS (Netherlands)

Borst, A; Theelen, B; Reinders, E; Boekhout, T; Fluit, AC; Savelkoul, PHM

Non-Candida albicans Candida species are increasingly being isolated. These species show differences in levels of resistance to antimycotic agents and mortality. Therefore, it is important to be able to correctly identify the causative organism to the species level. Identification of C. dubliniensis

Use of amplified fragment length polymorphism analysis to identify medically important Candida spp., including C. dubliniensis.

NARCIS (Netherlands)

Borst, A; Theelen, B; Reinders, E; Boekhout, T; Fluit, AC; Savelkoul, P.H.M.

2003-01-01

Non-Candida albicans Candida species are increasingly being isolated. These species show differences in levels of resistance to antimycotic agents and mortality. Therefore, it is important to be able to correctly identify the causative organism to the species level. Identification of C. dubliniensis

Reducing uncertainty at minimal cost: a method to identify important input parameters and prioritize data collection

NARCIS (Netherlands)

Uwizeye, U.A.; Groen, E.A.; Gerber, P.J.; Schulte, Rogier P.O.; Boer, de I.J.M.

2016-01-01

The study aims to illustrate a method to identify important input parameters that explain most of the output variance ofenvironmental assessment models. The method is tested for the computation of life-cycle nitrogen (N) use efficiencyindicators among mixed dairy production systems in Rwanda. We

PCR-RFLP Method to Identify Salmonid Species of Economic Importance

Directory of Open Access Journals (Sweden)

Andreea Dudu

2011-05-01

Full Text Available The identification of different fish species by molecular methods has become necessary to avoid both the incorrect labelling of individuals involved in repopulation programmes and the commercial frauds on the fish market. Different fish species of great economical importance, like the salmonids, which are very much requested for their meat, can be identified using molecular techniques such as PCR-RFLP. The method is based on the amplification of a target region from the genome by PCR reaction followed by endonucleases digestion to detect the polymorphism of restriction fragments. In our study we analysed the following salmonid species from Romania: Salmo trutta fario, Salmo labrax, Salvelinus fontinalis, Onchorhynchus mykiss, Thymallus thymallus and Hucho hucho. In order to discriminate between the analysed species we amplified a fragment of mitochondrial genome comprising tRNAGlu/ cytochrome b/ tRNAThr/ tRNAPro/ D-loop/ tRNAPhe, followed by digestion with a specific restriction enzyme. The direct digestion of unpurified PCR products generated species-specific restriction patterns and proved to be a simple, reliable, inexpensive and fast method. Thus, it may be successfully utilized in specialized laboratories for the correct identification of the fish species for multiple purposes, including the traceability of fish food products.

Measuring the Electronic Properties of DNA-Specific Schottky Diodes Towards Detecting and Identifying Basidiomycetes DNA

Science.gov (United States)

Periasamy, Vengadesh; Rizan, Nastaran; Al-Ta’ii, Hassan Maktuff Jaber; Tan, Yee Shin; Tajuddin, Hairul Annuar; Iwamoto, Mitsumasa

2016-01-01

The discovery of semiconducting behavior of deoxyribonucleic acid (DNA) has resulted in a large number of literatures in the study of DNA electronics. Sequence-specific electronic response provides a platform towards understanding charge transfer mechanism and therefore the electronic properties of DNA. It is possible to utilize these characteristic properties to identify/detect DNA. In this current work, we demonstrate a novel method of DNA-based identification of basidiomycetes using current-voltage (I-V) profiles obtained from DNA-specific Schottky barrier diodes. Electronic properties such as ideality factor, barrier height, shunt resistance, series resistance, turn-on voltage, knee-voltage, breakdown voltage and breakdown current were calculated and used to quantify the identification process as compared to morphological and molecular characterization techniques. The use of these techniques is necessary in order to study biodiversity, but sometimes it can be misleading and unreliable and is not sufficiently useful for the identification of fungi genera. Many of these methods have failed when it comes to identification of closely related species of certain genus like Pleurotus. Our electronics profiles, both in the negative and positive bias regions were however found to be highly characteristic according to the base-pair sequences. We believe that this simple, low-cost and practical method could be useful towards identifying and detecting DNA in biotechnology and pathology. PMID:27435636

Properties important to mixing and simulant recommendations for WTP full-scale vessel testing

Energy Technology Data Exchange (ETDEWEB)

Poirier, M. R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Martino, C. J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2015-12-01

Full Scale Vessel Testing (FSVT) is being planned by Bechtel National, Inc., to demonstrate the ability of the standard high solids vessel design (SHSVD) to meet mixing requirements over the range of fluid properties planned for processing in the Pretreatment Facility (PTF) of the Hanford Waste Treatment and Immobilization Plant (WTP). Testing will use simulated waste rather than actual Hanford waste. Therefore, the use of suitable simulants is critical to achieving the goals of the test program. WTP personnel requested the Savannah River National Laboratory (SRNL) to assist with development of simulants for use in FSVT. Among the tasks assigned to SRNL was to develop a list of waste properties that are important to pulse-jet mixer (PJM) performance in WTP vessels with elevated concentrations of solids.

Using the Developmental Gene Bicoid to Identify Species of Forensically Important Blowflies (Diptera: Calliphoridae

Directory of Open Access Journals (Sweden)

Seong Hwan Park

2013-01-01

Full Text Available Identifying species of insects used to estimate postmortem interval (PMI is a major subject in forensic entomology. Because forensic insect specimens are morphologically uniform and are obtained at various developmental stages, DNA markers are greatly needed. To develop new autosomal DNA markers to identify species, partial genomic sequences of the bicoid (bcd genes, containing the homeobox and its flanking sequences, from 12 blowfly species (Aldrichina grahami, Calliphora vicina, Calliphora lata, Triceratopyga calliphoroides, Chrysomya megacephala, Chrysomya pinguis, Phormia regina, Lucilia ampullacea, Lucilia caesar, Lucilia illustris, Hemipyrellia ligurriens and Lucilia sericata; Calliphoridae: Diptera were determined and analyzed. This study first sequenced the ten blowfly species other than C. vicina and L. sericata. Based on the bcd sequences of these 12 blowfly species, a phylogenetic tree was constructed that discriminates the subfamilies of Calliphoridae (Luciliinae, Chrysomyinae, and Calliphorinae and most blowfly species. Even partial genomic sequences of about 500 bp can distinguish most blowfly species. The short intron 2 and coding sequences downstream of the bcd homeobox in exon 3 could be utilized to develop DNA markers for forensic applications. These gene sequences are important in the evolution of insect developmental biology and are potentially useful for identifying insect species in forensic science.

Using the Developmental Gene Bicoid to Identify Species of Forensically Important Blowflies (Diptera: Calliphoridae)

Science.gov (United States)

Park, Seong Hwan; Park, Chung Hyun; Zhang, Yong; Piao, Huguo; Chung, Ukhee; Kim, Seong Yoon; Ko, Kwang Soo; Yi, Cheong-Ho; Jo, Tae-Ho; Hwang, Juck-Joon

2013-01-01

Identifying species of insects used to estimate postmortem interval (PMI) is a major subject in forensic entomology. Because forensic insect specimens are morphologically uniform and are obtained at various developmental stages, DNA markers are greatly needed. To develop new autosomal DNA markers to identify species, partial genomic sequences of the bicoid (bcd) genes, containing the homeobox and its flanking sequences, from 12 blowfly species (Aldrichina grahami, Calliphora vicina, Calliphora lata, Triceratopyga calliphoroides, Chrysomya megacephala, Chrysomya pinguis, Phormia regina, Lucilia ampullacea, Lucilia caesar, Lucilia illustris, Hemipyrellia ligurriens and Lucilia sericata; Calliphoridae: Diptera) were determined and analyzed. This study first sequenced the ten blowfly species other than C. vicina and L. sericata. Based on the bcd sequences of these 12 blowfly species, a phylogenetic tree was constructed that discriminates the subfamilies of Calliphoridae (Luciliinae, Chrysomyinae, and Calliphorinae) and most blowfly species. Even partial genomic sequences of about 500 bp can distinguish most blowfly species. The short intron 2 and coding sequences downstream of the bcd homeobox in exon 3 could be utilized to develop DNA markers for forensic applications. These gene sequences are important in the evolution of insect developmental biology and are potentially useful for identifying insect species in forensic science. PMID:23586044

Importance of intellectual property generated by biomedical research at universities and academic hospitals.

Science.gov (United States)

Heus, Joris J; de Pauw, Elmar S; Leloux, Mirjam; Morpurgo, Margherita; Hamblin, Michael R; Heger, Michal

2017-01-01

Biomedical research has many different facets. Researchers and clinicians study disease biology and biochemistry to discover novel therapeutic targets, unravel biochemical pathways and identify biomarkers to improve diagnosis, or devise new approaches to clinically manage diseases more effectively. In all instances, the overall goal of biomedical research is to ensure that results thereof (such as a therapy, a device, or a method which may be broadly referred to as "inventions") are clinically implemented. Most of the researchers' efforts are centered on the advance of technical and scientific aspects of an invention. The development and implementation of an invention can be arduous and very costly. Historically, it has proven to be crucial to protect intellectual property rights (IPR) to an invention (i.e., a patent) to ensure that companies can obtain a fair return on their investment that is needed to develop an academic invention into a product for the benefit of patients. However, the importance of IPR is not generally acknowledged among researchers at academic institutions active in biomedical research. Therefore this paper aims to (1) raise IP awareness amongst clinical and translational researchers; (2) provide a concise overview of what the patenting trajectory entails; and (3) highlight the importance of patenting for research and the researcher. Adequate patent protection of inventions generated through biomedical research at academic institutions increases the probability that patients will benefit from these inventions, and indirectly enables the financing of clinical studies, mainly by opening up funding opportunities (e.g. specific grants aimed at start-ups, pre-seed and seed capital) that otherwise would not be accessible. As a consequence, patented inventions are more likely to become clinically tested and reach the market, providing patients with more treatment options.

Properties of Two Novel Esterases Identified from Culture Supernatant of Penicillium purpurogenum Grown on Sugar Beet Pulp.

Science.gov (United States)

Oleas, Gabriela; Callegari, Eduardo; Sepulveda, Romina; Eyzaguirre, Jaime

2016-01-01

The filamentous fungus Penicillium purpurogenum grows on a variety of natural carbon sources, such as sugar beet pulp, and secretes to the medium a large number of enzymes that degrade the carbohydrate components of lignocellulose. Sugar beet pulp is rich in pectin, and the purpose of this work is to identify novel esterases produced by the fungus, which may participate in pectin degradation. Partially purified culture supernatants of the fungus grown on sugar beet pulp were subjected to mass spectrometry analysis. Peptides thus identified, which may be part of potential esterases were probed against the proteins deduced from the fungal genome sequence. The cDNAs of two putative esterases identified were expressed in Pichia pastoris and their properties studied. One of these enzymes, named FAET, is a feruloyl esterase, while the other, PE, is classified as a pectin methyl esterase. These findings add to our knowledge of the enzymology of pectin degradation by Penicillium purpurogenum, and define properties of two novel esterases acting on de-esterification of pectin. Their availability may be useful as tools for the study of pectin structure and degradation.

Resequencing 50 accessions of cultivated and wild rice yields markers for identifying agronomically important genes

DEFF Research Database (Denmark)

Xu, Xun; Liu, Xin; Ge, Song

2012-01-01

Rice is a staple crop that has undergone substantial phenotypic and physiological changes during domestication. Here we resequenced the genomes of 40 cultivated accessions selected from the major groups of rice and 10 accessions of their wild progenitors (Oryza rufipogon and Oryza nivara) to >15 x...... diversity in cultivated but not wild rice, which represent candidate regions selected during domestication. Some of these variants are associated with important biological features, whereas others have yet to be functionally characterized. The molecular markers we have identified should be valuable...... raw data coverage. We investigated genome-wide variation patterns in rice and obtained 6.5 million high-quality single nucleotide polymorphisms (SNPs) after excluding sites with missing data in any accession. Using these population SNP data, we identified thousands of genes with significantly lower...

Identifying important parameters for a continuous bioscouring process

NARCIS (Netherlands)

Lenting, H.B.M.; Lenting, H.B.M.; Zwier, E.; Nierstrasz, Vincent

2002-01-01

Compared to a bioscouring process in the batch mode, a continuously operating process requires relatively short processing steps. This study focusses on minimizing the required enzymatic incubation time. It is clear that the presence of a sufficient level of surfactant is of major importance in

The hierarchy-by-interval approach to identifying important models that need improvement in severe-accident simulation codes

International Nuclear Information System (INIS)

Heames, T.J.; Khatib-Rahbar, M.; Kelly, J.E.

1995-01-01

The hierarchy-by-interval (HBI) methodology was developed to determine an appropriate phenomena identification and ranking table for an independent peer review of severe-accident computer codes. The methodology is described, and the results of a specific code review are presented. Use of this systematic and structured approach ensures that important code models that need improvement are identified and prioritized, which allows code sponsors to more effectively direct limited resources in future code development. In addition, critical phenomenological areas that need more fundamental work, such as experimentation, are identified

To Identify the Important Soil Properties Affecting Dinoseb Adsorption with Statistical Analysis

Directory of Open Access Journals (Sweden)

Yiqing Guan

2013-01-01

Full Text Available Investigating the influences of soil characteristic factors on dinoseb adsorption parameter with different statistical methods would be valuable to explicitly figure out the extent of these influences. The correlation coefficients and the direct, indirect effects of soil characteristic factors on dinoseb adsorption parameter were analyzed through bivariate correlation analysis, and path analysis. With stepwise regression analysis the factors which had little influence on the adsorption parameter were excluded. Results indicate that pH and CEC had moderate relationship and lower direct effect on dinoseb adsorption parameter due to the multicollinearity with other soil factors, and organic carbon and clay contents were found to be the most significant soil factors which affect the dinoseb adsorption process. A regression is thereby set up to explore the relationship between the dinoseb adsorption parameter and the two soil factors: the soil organic carbon and clay contents. A 92% of the variation of dinoseb sorption coefficient could be attributed to the variation of the soil organic carbon and clay contents.

Statistical analyses of scatterplots to identify important factors in large-scale simulations, 2: robustness of techniques

International Nuclear Information System (INIS)

Kleijnen, J.P.C.; Helton, J.C.

1999-01-01

The robustness of procedures for identifying patterns in scatterplots generated in Monte Carlo sensitivity analyses is investigated. These procedures are based on attempts to detect increasingly complex patterns in the scatterplots under consideration and involve the identification of (i) linear relationships with correlation coefficients, (ii) monotonic relationships with rank correlation coefficients, (iii) trends in central tendency as defined by means, medians and the Kruskal-Wallis statistic, (iv) trends in variability as defined by variances and interquartile ranges, and (v) deviations from randomness as defined by the chi-square statistic. The following two topics related to the robustness of these procedures are considered for a sequence of example analyses with a large model for two-phase fluid flow: the presence of Type I and Type II errors, and the stability of results obtained with independent Latin hypercube samples. Observations from analysis include: (i) Type I errors are unavoidable, (ii) Type II errors can occur when inappropriate analysis procedures are used, (iii) physical explanations should always be sought for why statistical procedures identify variables as being important, and (iv) the identification of important variables tends to be stable for independent Latin hypercube samples

Predicting and analyzing DNA-binding domains using a systematic approach to identifying a set of informative physicochemical and biochemical properties

Science.gov (United States)

2011-01-01

Background Existing methods of predicting DNA-binding proteins used valuable features of physicochemical properties to design support vector machine (SVM) based classifiers. Generally, selection of physicochemical properties and determination of their corresponding feature vectors rely mainly on known properties of binding mechanism and experience of designers. However, there exists a troublesome problem for designers that some different physicochemical properties have similar vectors of representing 20 amino acids and some closely related physicochemical properties have dissimilar vectors. Results This study proposes a systematic approach (named Auto-IDPCPs) to automatically identify a set of physicochemical and biochemical properties in the AAindex database to design SVM-based classifiers for predicting and analyzing DNA-binding domains/proteins. Auto-IDPCPs consists of 1) clustering 531 amino acid indices in AAindex into 20 clusters using a fuzzy c-means algorithm, 2) utilizing an efficient genetic algorithm based optimization method IBCGA to select an informative feature set of size m to represent sequences, and 3) analyzing the selected features to identify related physicochemical properties which may affect the binding mechanism of DNA-binding domains/proteins. The proposed Auto-IDPCPs identified m=22 features of properties belonging to five clusters for predicting DNA-binding domains with a five-fold cross-validation accuracy of 87.12%, which is promising compared with the accuracy of 86.62% of the existing method PSSM-400. For predicting DNA-binding sequences, the accuracy of 75.50% was obtained using m=28 features, where PSSM-400 has an accuracy of 74.22%. Auto-IDPCPs and PSSM-400 have accuracies of 80.73% and 82.81%, respectively, applied to an independent test data set of DNA-binding domains. Some typical physicochemical properties discovered are hydrophobicity, secondary structure, charge, solvent accessibility, polarity, flexibility, normalized Van Der

Antimicrobial properties of nest volatiles in red imported fire ants, Solenopsis invicta (hymenoptera: formicidae)

Science.gov (United States)

Wang, Lei; Elliott, Brad; Jin, Xixuan; Zeng, Ling; Chen, Jian

2015-12-01

The antimicrobial property of volatiles produced by red imported fire ants, Solenopsis invicta, against Beauveria bassiana, a common entomopathogenic fungus, was demonstrated. The germination rate of B. bassiana spores was significantly reduced after they were exposed to volatiles within an artificial ant nest. Since the air that contained the same level of O2 and CO2 as that in artificial fire ant nests did not suppress the germination rate of B. bassiana, the observed reduction of germination rate must be caused by the toxicity of nest volatiles. Nest fumigation may be an important component of the social immune system in S. invicta.

Long-term properties of bituminized waste products

International Nuclear Information System (INIS)

Snellman, M.; Valkiainen, M.

1985-10-01

This study is a survey of the factors of importance for the long term behaviour of bituminized ion exchange resins. Phenomena occurring in bituminized waste products affected by the treatment, storage and disposal are identified. Test methods have been developed for characterizing product properties, which are important for the long-term behaviour. The long-term properties of bituminized ion-exchange resins are studied in a repository environment with access of water equilibrated with concrete. In these circumstances the most important properties are related to the interactions of bituminized waste with the surrounding barriers. The most important phenomena are water uptake due to rehydration of the resins and subsequent swelling of the product

Long-term properties of bituminized waste products

International Nuclear Information System (INIS)

Snellman, M.; Valkiainen, M.

1985-10-01

This study is a survey of the factors of importance for long term behaviour of bituminized ion exchange resins. Phenomena occurring in bituminized waste products affected by the treatment, storage and disposal are identified. Test methods have been developed for characterizing product properties, which are important for the long-term behaviour. The long-term properties of bituminized ion-exchange resins are studied in a repository environment with access of water equilibrated with concrete. In these circumstances the most important properties are ralated to the interactions of bituminized waste with the surrounding barriers. The most important phenomena are water uptake due to rehydration of the resins and subsequent swelling of the product. (author)

Neighborhood properties are important determinants of temperature sensitive mutations.

Directory of Open Access Journals (Sweden)

Svetlana Lockwood

Full Text Available Temperature-sensitive (TS mutants are powerful tools to study gene function in vivo. These mutants exhibit wild-type activity at permissive temperatures and reduced activity at restrictive temperatures. Although random mutagenesis can be used to generate TS mutants, the procedure is laborious and unfeasible in multicellular organisms. Further, the underlying molecular mechanisms of the TS phenotype are poorly understood. To elucidate TS mechanisms, we used a machine learning method-logistic regression-to investigate a large number of sequence and structure features. We developed and tested 133 features, describing properties of either the mutation site or the mutation site neighborhood. We defined three types of neighborhood using sequence distance, Euclidean distance, and topological distance. We discovered that neighborhood features outperformed mutation site features in predicting TS mutations. The most predictive features suggest that TS mutations tend to occur at buried and rigid residues, and are located at conserved protein domains. The environment of a buried residue often determines the overall structural stability of a protein, thus may lead to reversible activity change upon temperature switch. We developed TS prediction models based on logistic regression and the Lasso regularized procedure. Through a ten-fold cross-validation, we obtained the area under the curve of 0.91 for the model using both sequence and structure features. Testing on independent datasets suggested that the model predicted TS mutations with a 50% precision. In summary, our study elucidated the molecular basis of TS mutants and suggested the importance of neighborhood properties in determining TS mutations. We further developed models to predict TS mutations derived from single amino acid substitutions. In this way, TS mutants can be efficiently obtained through experimentally introducing the predicted mutations.

The important parameters of polyurethane's properties and preparation

International Nuclear Information System (INIS)

Rad, A.S.

2009-01-01

Polyurethane (PU) is a type of plastic rind is formed by reacting a polyol (a polymeric alcohol with more than. two reactive hydroxyl groups per molecule) with diisocyanates or polymeric isocyanate in the presence of suitable catalysts and additives. Variations in the number of substitutions and the spacing between and within branch chains produce PUs ranging from linear to branched and flexible to rigid. Linear PUs are used for the manufacture of fibers and molding. The structure of polyurethane can be medley containing 'hard' and 'soft' sect, which contribute to the harmony between rigid and elastomeric properties. The chemical composition and molecular weight distribution (MWD)- of the incorporated soft block influence the macroscopic properties of the resulting coating. In modifying the backbone structure of PU coatings it is necessary to consider the end use for the coating and the cost of modification: The properties of the modified PU coating, The resistance of the coating towards mechanical and The compatibility of the coating and the substrate over the temperature range of expected application and The between the benefits to be gained and the additional cost are the parameters that must be A surface functionalization of a synthetic polyurethane was carried out by using biofunctional moieties to obtain a material with the appropriate mechanical properties and processing conditions. (author)

The Importance of Thermophysical Properties of Steels for the Numerical Simulation of a Concasting Process

Directory of Open Access Journals (Sweden)

Frantisek KAVICKA

2010-12-01

Full Text Available The thermophysical properties of steels have significant influence on the actual concasting process, and on the accuracy of its numerical simulation and optimization. The determination of these properties (heat conductivity, specific heat capacity and density in the solid and liquid states often requires more time than the actual numerical calculation of the temperature fields of a continuously cast steel billet, cylinder or slab (generally a concasting. The influence of individual properties should be neither under- nor over-estimated. Therefore, an analysis/parametric study of these thermophysical properties was conducted. The order of importance within the actual process and the accuracy of simulation and optimization were also determined. Individual properties, which, in some cases, were obtained from tables, and in others experimentally, were substituted by an approximation using orthogonal polynomials. The accuracy of each polynomial is dependent on the precision of individual values. The order of significance of individual thermophysical properties was determined with respect to the metallurgical length. The analysis was performed by means of a so-called calculation experiment, i.e. by means of the original and universal numerical concasting model developed by the authors of this paper. It is convenient to conduct such an analysis in order to facilitate the simulation of each individual case of concasting, thus enhancing the process of optimization.

Properties and CAPE

DEFF Research Database (Denmark)

Gani, Rafiqul; O'Connell, J.P.

2001-01-01

The role of properties in the solution of Computer Aided Process Engineering (CAPE) problems is described in terms of current trend, future challenges and important issues. Three distinct roles of properties in CAFE have been identified - a service role, a service plus advice role and a service......, advice plus solve role. The CAFE problems solved under each of these roles are described together with simple illustrative examples. Finally, the paper describes how some of the future problems related to integration of synthesis, design and control might be dealt with efficiently and reliably through co......-operative CAFE and properties methodologies. (C) 2001 Elsevier Science Ltd. All rights reserved....

Identifying influential spreaders in interconnected networks

International Nuclear Information System (INIS)

Zhao, Dawei; Li, Lixiang; Huo, Yujia; Yang, Yixian; Li, Shudong

2014-01-01

Identifying the most influential spreaders in spreading dynamics is of the utmost importance for various purposes for understanding or controlling these processes. The existing relevant works are limited to a single network. Most real networks are actually not isolated, but typically coupled and affected by others. The properties of epidemic spreading have recently been found to have some significant differences in interconnected networks from those in a single network. In this paper, we focus on identifying the influential spreaders in interconnected networks. We find that the well-known k-shell index loses effectiveness; some insignificant spreaders in a single network become the influential spreaders in the whole interconnected networks while some influential spreaders become no longer important. The simulation results show that the spreading capabilities of the nodes not only depend on their influence for the network topology, but also are dramatically influenced by the spreading rate. Based on this perception, a novel index is proposed for measuring the influential spreaders in interconnected networks. We then support the efficiency of this index with numerical simulations. (paper)

Genome-Wide Association Study Identifying Candidate Genes Influencing Important Agronomic Traits of Flax (Linum usitatissimum L.) Using SLAF-seq.

Science.gov (United States)

Xie, Dongwei; Dai, Zhigang; Yang, Zemao; Sun, Jian; Zhao, Debao; Yang, Xue; Zhang, Liguo; Tang, Qing; Su, Jianguang

2017-01-01

Flax ( Linum usitatissimum L.) is an important cash crop, and its agronomic traits directly affect yield and quality. Molecular studies on flax remain inadequate because relatively few flax genes have been associated with agronomic traits or have been identified as having potential applications. To identify markers and candidate genes that can potentially be used for genetic improvement of crucial agronomic traits, we examined 224 specimens of core flax germplasm; specifically, phenotypic data for key traits, including plant height, technical length, number of branches, number of fruits, and 1000-grain weight were investigated under three environmental conditions before specific-locus amplified fragment sequencing (SLAF-seq) was employed to perform a genome-wide association study (GWAS) for these five agronomic traits. Subsequently, the results were used to screen single nucleotide polymorphism (SNP) loci and candidate genes that exhibited a significant correlation with the important agronomic traits. Our analyses identified a total of 42 SNP loci that showed significant correlations with the five important agronomic flax traits. Next, candidate genes were screened in the 10 kb zone of each of the 42 SNP loci. These SNP loci were then analyzed by a more stringent screening via co-identification using both a general linear model (GLM) and a mixed linear model (MLM) as well as co-occurrences in at least two of the three environments, whereby 15 final candidate genes were obtained. Based on these results, we determined that UGT and PL are candidate genes for plant height, GRAS and XTH are candidate genes for the number of branches, Contig1437 and LU0019C12 are candidate genes for the number of fruits, and PHO1 is a candidate gene for the 1000-seed weight. We propose that the identified SNP loci and corresponding candidate genes might serve as a biological basis for improving crucial agronomic flax traits.

Genome-Wide Association Study Identifying Candidate Genes Influencing Important Agronomic Traits of Flax (Linum usitatissimum L. Using SLAF-seq

Directory of Open Access Journals (Sweden)

Dongwei Xie

2018-01-01

Full Text Available Flax (Linum usitatissimum L. is an important cash crop, and its agronomic traits directly affect yield and quality. Molecular studies on flax remain inadequate because relatively few flax genes have been associated with agronomic traits or have been identified as having potential applications. To identify markers and candidate genes that can potentially be used for genetic improvement of crucial agronomic traits, we examined 224 specimens of core flax germplasm; specifically, phenotypic data for key traits, including plant height, technical length, number of branches, number of fruits, and 1000-grain weight were investigated under three environmental conditions before specific-locus amplified fragment sequencing (SLAF-seq was employed to perform a genome-wide association study (GWAS for these five agronomic traits. Subsequently, the results were used to screen single nucleotide polymorphism (SNP loci and candidate genes that exhibited a significant correlation with the important agronomic traits. Our analyses identified a total of 42 SNP loci that showed significant correlations with the five important agronomic flax traits. Next, candidate genes were screened in the 10 kb zone of each of the 42 SNP loci. These SNP loci were then analyzed by a more stringent screening via co-identification using both a general linear model (GLM and a mixed linear model (MLM as well as co-occurrences in at least two of the three environments, whereby 15 final candidate genes were obtained. Based on these results, we determined that UGT and PL are candidate genes for plant height, GRAS and XTH are candidate genes for the number of branches, Contig1437 and LU0019C12 are candidate genes for the number of fruits, and PHO1 is a candidate gene for the 1000-seed weight. We propose that the identified SNP loci and corresponding candidate genes might serve as a biological basis for improving crucial agronomic flax traits.

Identifying sources of soil inorganic pollutants on a regional scale using a multivariate statistical approach: Role of pollutant migration and soil physicochemical properties

International Nuclear Information System (INIS)

Zhang Changbo; Wu Longhua; Luo Yongming; Zhang Haibo; Christie, Peter

2008-01-01

Principal components analysis (PCA) and correlation analysis were used to estimate the contribution of four components related to pollutant sources on the total variation in concentrations of Cu, Zn, Pb, Cd, As, Se, Hg, Fe and Mn in surface soil samples from a valley in east China with numerous copper and zinc smelters. Results indicate that when carrying out source identification of inorganic pollutants their tendency to migrate in soils may result in differences between the pollutant composition of the source and the receptor soil, potentially leading to errors in the characterization of pollutants using multivariate statistics. The stability and potential migration or movement of pollutants in soils must therefore be taken into account. Soil physicochemical properties may offer additional useful information. Two different mechanisms have been hypothesized for correlations between soil heavy metal concentrations and soil organic matter content and these may be helpful in interpreting the statistical analysis. - Principal components analysis with Varimax rotation can help identify sources of soil inorganic pollutants but pollutant migration and soil properties can exert important effects

Crowd-sourced Ontology for Photoleukocoria: Identifying Common Internet Search Terms for a Potentially Important Pediatric Ophthalmic Sign.

Science.gov (United States)

Staffieri, Sandra E; Kearns, Lisa S; Sanfilippo, Paul G; Craig, Jamie E; Mackey, David A; Hewitt, Alex W

2018-02-01

Leukocoria is the most common presenting sign for pediatric eye disease including retinoblastoma and cataract, with worse outcomes if diagnosis is delayed. We investigated whether individuals could identify leukocoria in photographs (photoleukocoria) and examined their subsequent Internet search behavior. Using a web-based questionnaire, in this cross-sectional study we invited adults aged over 18 years to view two photographs of a child with photoleukocoria, and then search the Internet to determine a possible diagnosis and action plan. The most commonly used search terms and websites accessed were recorded. The questionnaire was completed by 1639 individuals. Facebook advertisement was the most effective recruitment strategy. The mean age of all respondents was 38.95 ± 14.59 years (range, 18-83), 94% were female, and 59.3% had children. An abnormality in the images presented was identified by 1613 (98.4%) participants. The most commonly used search terms were: "white," "pupil," "photo," and "eye" reaching a variety of appropriate websites or links to print or social media articles. Different words or phrases were used to describe the same observation of photoleukocoria leading to a range of websites. Variations in the description of observed signs and search words influenced the sites reached, information obtained, and subsequent help-seeking intentions. Identifying the most commonly used search terms for photoleukocoria is an important step for search engine optimization. Being directed to the most appropriate websites informing of the significance of photoleukocoria and the appropriate actions to take could improve delays in diagnosis of important pediatric eye disease such as retinoblastoma or cataract.

Importance of van der Waals interaction on structural, vibrational, and thermodynamic properties of NaCl

Science.gov (United States)

Marcondes, Michel L.; Wentzcovitch, Renata M.; Assali, Lucy V. C.

2018-05-01

Thermal equations of state (EOS) are essential in several scientific domains. However, experimental determination of EOS parameters may be limited at extreme conditions, therefore, ab initio calculations have become an important method to obtain them. Density functional theory (DFT) and its extensions with various degrees of approximations for the exchange and correlation (XC) energy is the method of choice, but large errors in the EOS parameters are still common. The alkali halides have been problematic from the onset of this field and the quest for appropriate DFT functionals for such ionic and relatively weakly bonded systems has remained an active topic of research. Here we use DFT + van der Waals functionals to calculate vibrational properties, thermal EOS, thermodynamic properties, and the B1 to B2 phase boundary of NaCl with high precision. Our results reveal a remarkable improvement over the performance of standard local density approximation and generalized gradient approximation functionals for all these properties and phase transition boundary, as well as great sensitivity of anharmonic effects on the choice of XC functional.

An introduction to intellectual property licensing for technology companies

Science.gov (United States)

Meier, Lawrence H.

2001-05-01

Intellectual property licensing is an important issue facing all technology companies. Before entering into license agreements a number of issues need to be addressed, including invention ownership, obtaining and identifying licensable subject matter, and developing a licensing strategy. There are a number of important provisions that are included in most intellectual property license agreements. These provisions include definitions, the license grant, consideration, audit rights confidentiality, warranties, indemnification, and limitation of liability. Special licensing considerations exist relative to each type of intellectual property, and when the other party is a foreign company or a university.

Properties important for solid–liquid separations change during the enzymatic hydrolysis of pretreated wheat straw

DEFF Research Database (Denmark)

Weiss, Noah Daniel; Felby, Claus; Thygesen, Lisbeth Garbrecht

2018-01-01

Objectives The biochemical conversion of lignocellulosic biomass into renewable fuels and chemicals provides new challenges for industrial scale processes. One such process, which has received little attention, but is of great importance for efficient product recovery, is solid–liquid separations......, which may occur both after pretreatment and after the enzymatic hydrolysis steps. Due to the changing nature of the solid biomass during processing, the solid–liquid separation properties of the biomass can also change. The objective of this study was to show the effect of enzymatic hydrolysis...... of cellulose upon the water retention properties of pretreated biomass over the course of the hydrolysis reaction. Results Water retention value measurements, coupled with 1H NMR T2 relaxometry data, showed an increase in water retention and constraint of water by the biomass with increasing levels...

Sensory properties of Californian and imported extra virgin olive oils.

Science.gov (United States)

Delgado, Claudia; Guinard, Jean-Xavier

2011-04-01

Production and consumption of extra-virgin olive has been increasing in the United States, particularly in California. The objective of this study was to compare the sensory characteristics of 22 extra virgin olive oils (EVOO) from California, Italy, Spain, Chile, and Australia using a generic descriptive analysis. A total of 22 sensory attributes were identified and defined by the descriptive panel. With the exception of thick and citrus, all sensory attributes were significantly different among the oils. Canonical Variate Analysis (CVA) showed that California oils differed from some imported EVOOs, mainly by their absence of defects. A second analysis, of only those attributes included in the International Olive Council (IOC) official scorecard, provided a less detailed description of the samples and did not allow for a full characterization of the oils. While the IOC attributes allowed for faster classification in terms of clean versus defective EVOOs, the more comprehensive descriptive analysis provided both more information and a more refined classification of the samples. Variety and region of origin were important factors in the classification of both Californian and imported EVOOs.   Measuring olive oil sensory quality using the IOC method-positive attributes of fruitiness, bitterness, and pungency, and defects including fusty, musty, winey, and rancid-allows for the certification of oils as extra virgin but it provides limited information on the sensory characteristics of the oils. A full descriptive profile, on the other hand, provides information that can be used by producers in the processing and marketing of their oils, and is a useful tool in the education of consumers about the wide range of (positive) sensory attributes in EVOO and the various sensory styles of EVOO.

Sea Cucumber Glycosides: Chemical Structures, Producing Species and Important Biological Properties.

Science.gov (United States)

Mondol, Muhammad Abdul Mojid; Shin, Hee Jae; Rahman, M Aminur; Islam, Mohamad Tofazzal

2017-10-17

Sea cucumbers belonging to echinoderm are traditionally used as tonic food in China and other Asian countries. They produce abundant biologically active triterpene glycosides. More than 300 triterpene glycosides have been isolated and characterized from various species of sea cucumbers, which are classified as holostane and nonholostane depending on the presence or absence of a specific structural unit γ(18,20)-lactone in the aglycone. Triterpene glycosides contain a carbohydrate chain up to six monosaccharide units mainly consisting of d-xylose, 3-O-methy-d-xylose, d-glucose, 3-O-methyl-d-glucose, and d-quinovose. Cytotoxicity is the common biological property of triterpene glycosides isolated from sea cucumbers. Besides cytotoxicity, triterpene glycosides also exhibit antifungal, antiviral and hemolytic activities. This review updates and summarizes our understanding on diverse chemical structures of triterpene glycosides from various species of sea cucumbers and their important biological activities. Mechanisms of action and structural-activity relationships (SARs) of sea cucumber glycosides are also discussed briefly.

Systematic reviews identify important methodological flaws in stroke rehabilitation therapy primary studies: review of reviews.

Science.gov (United States)

Santaguida, Pasqualina; Oremus, Mark; Walker, Kathryn; Wishart, Laurie R; Siegel, Karen Lohmann; Raina, Parminder

2012-04-01

A "review of reviews" was undertaken to assess methodological issues in studies evaluating nondrug rehabilitation interventions in stroke patients. MEDLINE, CINAHL, PsycINFO, and the Cochrane Database of Systematic Reviews were searched from January 2000 to January 2008 within the stroke rehabilitation setting. Electronic searches were supplemented by reviews of reference lists and citations identified by experts. Eligible studies were systematic reviews; excluded citations were narrative reviews or reviews of reviews. Review characteristics and criteria for assessing methodological quality of primary studies within them were extracted. The search yielded 949 English-language citations. We included a final set of 38 systematic reviews. Cochrane reviews, which have a standardized methodology, were generally of higher methodological quality than non-Cochrane reviews. Most systematic reviews used standardized quality assessment criteria for primary studies, but not all were comprehensive. Reviews showed that primary studies had problems with randomization, allocation concealment, and blinding. Baseline comparability, adverse events, and co-intervention or contamination were not consistently assessed. Blinding of patients and providers was often not feasible and was not evaluated as a source of bias. The eligible systematic reviews identified important methodological flaws in the evaluated primary studies, suggesting the need for improvement of research methods and reporting. Copyright © 2012 Elsevier Inc. All rights reserved.

Identifying the changes of geo-engineering properties of dunites due to weathering utilizing electrical resistivity tomography (ERT)

International Nuclear Information System (INIS)

Ündül, Ömer; Tuğrul, Atiye; Zarif, İ Halil; Özyalın, Şenol

2015-01-01

Weathering phenomena have an important role in many construction facilities with varying depths and grades. Due to the anisotropic and heterogeneous nature of weathering profiles of some rocks, uncertainities exist in determining the geo-engineering properties. Geo-electrical studies have been utilized to overcome such uncertainities for various subsurface conditions including the determination of boundaries between weathered and unweathered parts of different rock types.In this study, the electrical resistivity tomography (ERT) results were correlated with conventional methods in determining the effects of weathering on the geo-engineering properties of dunites. During the research, weathering grades were determined by field studies including discontinuity spacings, aperture and properties of fill materials. The detailed petrographical studies, determination of petrophysical properties (e.g. water absorption and effective porosity) and mechanical properties (e.g. unconfined compressive strength (UCS)) constitute the laboratory studies. ERT studies were carried out in a row of sixty electrodes with electrode spacings of 0.5 m utilizing a Wenner–Schlumberger configuration. According to the comparison of the inversion model sections with the weathering profiles obtained by field and laboratory studies it is concluded that the use of ERT with a Wenner–Schlumberger configuration supplies comparable data for wider subsurface areas from the view of weathering and its effect on geo-engineering properties of dunites. In addition, ERT techniques are very useful where conventional techniques are inadequate in determining the full weathering profile. (paper)

Global sensitivity analysis for identifying important parameters of nitrogen nitrification and denitrification under model uncertainty and scenario uncertainty

Science.gov (United States)

Chen, Zhuowei; Shi, Liangsheng; Ye, Ming; Zhu, Yan; Yang, Jinzhong

2018-06-01

Nitrogen reactive transport modeling is subject to uncertainty in model parameters, structures, and scenarios. By using a new variance-based global sensitivity analysis method, this paper identifies important parameters for nitrogen reactive transport with simultaneous consideration of these three uncertainties. A combination of three scenarios of soil temperature and two scenarios of soil moisture creates a total of six scenarios. Four alternative models describing the effect of soil temperature and moisture content are used to evaluate the reduction functions used for calculating actual reaction rates. The results show that for nitrogen reactive transport problem, parameter importance varies substantially among different models and scenarios. Denitrification and nitrification process is sensitive to soil moisture content status rather than to the moisture function parameter. Nitrification process becomes more important at low moisture content and low temperature. However, the changing importance of nitrification activity with respect to temperature change highly relies on the selected model. Model-averaging is suggested to assess the nitrification (or denitrification) contribution by reducing the possible model error. Despite the introduction of biochemical heterogeneity or not, fairly consistent parameter importance rank is obtained in this study: optimal denitrification rate (Kden) is the most important parameter; reference temperature (Tr) is more important than temperature coefficient (Q10); empirical constant in moisture response function (m) is the least important one. Vertical distribution of soil moisture but not temperature plays predominant role controlling nitrogen reaction. This study provides insight into the nitrogen reactive transport modeling and demonstrates an effective strategy of selecting the important parameters when future temperature and soil moisture carry uncertainties or when modelers face with multiple ways of establishing nitrogen

The strategic importance of identifying knowledge-based and intangible assets for generating value, competitiveness and innovation in sub-Saharan Africa

Directory of Open Access Journals (Sweden)

Nicoline Ondari-Okemwa

2011-01-01

Full Text Available This article discusses the strategic importance of identifying intangible assets for creating value and enhancing competitiveness and innovation in science and technology in a knowledge economy with particular reference to the sub- Saharan Africa region. It has always been difficult to gather the prerequisite information to manage such assets and create value from them. The paper discusses the nature of intangible assets, the characteristics of a knowledge economy and the role of knowledge workers in a knowledge economy. The paper also discusses the importance of identifying intangible assets in relation to capturing the value of such assets, the transfer of intangible assets to other owners and the challenges of managing organizational intangible assets. Objectives of the article include: underscoring the strategic importance of identifying intangible assets in sub-Saharan Africa; examining the performance of intangible assets in a knowledge economy; how intangible assets may generate competitiveness, economic growth and innovation; and assess how knowledge workers are becoming a dominant factor in the knowledge economy. An extensive literature review was employed to collect data for this article. It is concluded in the article that organizations and governments in sub-Saharan Africa should look at knowledge-based assets as strategic resources, even though the traditional accounting systems may still be having problems in determining the exact book value of such assets. It is recommended that organizations and government departments in sub-Saharan Africa should implement a system of the reporting of the value of intangible organizational assets just like the reporting of the value of tangible assets; and that organizations in sub-Saharan Africa should use knowledge to produce “smart products and services” which command premium prices.

Structure, stability, and properties of the trans peroxo nitrate radical: the importance of nondynamic correlation.

Science.gov (United States)

Dutta, Achintya Kumar; Dar, Manzoor; Vaval, Nayana; Pal, Sourav

2014-02-27

We report a comparative single-reference and multireference coupled-cluster investigation on the structure, potential energy surface, and IR spectroscopic properties of the trans peroxo nitrate radical, one of the key intermediates in stratospheric NOX chemistry. The previous single-reference ab initio studies predicted an unbound structure for the trans peroxo nitrate radical. However, our Fock space multireference coupled-cluster calculation confirms a bound structure for the trans peroxo nitrate radical, in accordance with the experimental results reported earlier. Further, the analysis of the potential energy surface in FSMRCC method indicates a well-behaved minima, contrary to the shallow minima predicted by the single-reference coupled-cluster method. The harmonic force field analysis, of various possible isomers of peroxo nitrate also reveals that only the trans structure leads to the experimentally observed IR peak at 1840 cm(-1). The present study highlights the critical importance of nondynamic correlation in predicting the structure and properties of high-energy stratospheric NOx radicals.

Machine Learning Identification of Protein Properties Useful for Specific Applications

KAUST Repository

Khamis, Abdullah

2016-03-31

Proteins play critical roles in cellular processes of living organisms. It is therefore important to identify and characterize their key properties associated with their functions. Correlating protein’s structural, sequence and physicochemical properties of its amino acids (aa) with protein functions could identify some of the critical factors governing the specific functionality. We point out that not all functions of even well studied proteins are known. This, complemented by the huge increase in the number of newly discovered and predicted proteins, makes challenging the experimental characterization of the whole spectrum of possible protein functions for all proteins of interest. Consequently, the use of computational methods has become more attractive. Here we address two questions. The first one is how to use protein aa sequence and physicochemical properties to characterize a family of proteins. The second one focuses on how to use transcription factor (TF) protein’s domains to enhance accuracy of predicting TF DNA binding sites (TFBSs). To address the first question, we developed a novel method using computational representation of proteins based on characteristics of different protein regions (N-terminal, M-region and C-terminal) and combined these with the properties of protein aa sequences. We show that this description provides important biological insight about characterization of the protein functional groups. Using feature selection techniques, we identified key properties of proteins that allow for very accurate characterization of different protein families. We demonstrated efficiency of our method in application to a number of antimicrobial peptide families. To address the second question we developed another novel method that uses a combination of aa properties of DNA binding domains of TFs and their TFBS properties to develop machine learning models for predicting TFBSs. Feature selection is used to identify the most relevant characteristics

Identifying Phase Space Boundaries with Voronoi Tessellations

CERN Document Server

Debnath, Dipsikha; Kilic, Can; Kim, Doojin; Matchev, Konstantin T.; Yang, Yuan-Pao

2016-11-24

Determining the masses of new physics particles appearing in decay chains is an important and longstanding problem in high energy phenomenology. Recently it has been shown that these mass measurements can be improved by utilizing the boundary of the allowed region in the fully differentiable phase space in its full dimensionality. Here we show that the practical challenge of identifying this boundary can be solved using techniques based on the geometric properties of the cells resulting from Voronoi tessellations of the relevant data. The robust detection of such phase space boundaries in the data could also be used to corroborate a new physics discovery based on a cut-and-count analysis.

Statistical analyses of scatterplots to identify important factors in large-scale simulations, 1: Review and comparison of techniques

International Nuclear Information System (INIS)

Kleijnen, J.P.C.; Helton, J.C.

1999-01-01

Procedures for identifying patterns in scatterplots generated in Monte Carlo sensitivity analyses are described and illustrated. These procedures attempt to detect increasingly complex patterns in scatterplots and involve the identification of (i) linear relationships with correlation coefficients, (ii) monotonic relationships with rank correlation coefficients, (iii) trends in central tendency as defined by means, medians and the Kruskal-Wallis statistic, (iv) trends in variability as defined by variances and interquartile ranges, and (v) deviations from randomness as defined by the chi-square statistic. A sequence of example analyses with a large model for two-phase fluid flow illustrates how the individual procedures can differ in the variables that they identify as having effects on particular model outcomes. The example analyses indicate that the use of a sequence of procedures is a good analysis strategy and provides some assurance that an important effect is not overlooked

Identifying selectively important amino acid positions associated with alternative habitat environments in fish mitochondrial genomes.

Science.gov (United States)

Xia, Jun Hong; Li, Hong Lian; Zhang, Yong; Meng, Zi Ning; Lin, Hao Ran

2018-05-01

Fish species inhabitating seawater (SW) or freshwater (FW) habitats have to develop genetic adaptations to alternative environment factors, especially salinity. Functional consequences of the protein variations associated with habitat environments in fish mitochondrial genomes have not yet received much attention. We analyzed 829 complete fish mitochondrial genomes and compared the amino acid differences of 13 mitochondrial protein families between FW and SW fish groups. We identified 47 specificity determining sites (SDS) that associated with FW or SW environments from 12 mitochondrial protein families. Thirty-two (68%) of the SDS sites are hydrophobic, 13 (28%) are neutral, and the remaining sites are acidic or basic. Seven of those SDS from ND1, ND2 and ND5 were scored as probably damaging to the protein structures. Furthermore, phylogenetic tree based Bayes Empirical Bayes analysis also detected 63 positive sites associated with alternative habitat environments across ten mtDNA proteins. These signatures could be important for studying mitochondrial genetic variation relevant to fish physiology and ecology.

Identifying and Characterizing Important Trembling Aspen Competitors with Juvenile Lodgepole Pine in Three South-Central British Columbia Ecosystems

Directory of Open Access Journals (Sweden)

Teresa A. Newsome

2012-01-01

Full Text Available Critical height ratios for predicting competition between trembling aspen and lodgepole pine were identified in six juvenile stands in three south-central British Columbia ecosystems. We used a series of regression analyses predicting pine stem diameter from the density of neighbouring aspen in successively shorter relative height classes to identify the aspen-pine height ratio that maximized R2. Critical height ratios varied widely among sites when stands were 8–12 years old but, by age 14–19, had converged at 1.25–1.5. Maximum R2 values at age 14–19 ranged from 13.4% to 69.8%, demonstrating that the importance of aspen competition varied widely across a relatively small geographic range. Logistic regression also indicated that the risk of poor pine vigour in the presence of aspen varied between sites. Generally, the degree of competition, risk to pine vigour, and size of individual aspen contributing to the models declined along a gradient of decreasing ecosystem productivity.

Triangulating Principal Effectiveness: How Perspectives of Parents, Teachers, and Assistant Principals Identify the Central Importance of Managerial Skills. Working Paper 35

Science.gov (United States)

Grissom, Jason A.; Loeb, Susanna

2009-01-01

While the importance of effective principals is undisputed, few studies have addressed what specific skills principals need to promote school success. This study draws on unique data combining survey responses from principals, assistant principals, teachers and parents with rich administrative data to identify which principal skills matter most…

Machine Learning Identification of Protein Properties Useful for Specific Applications

KAUST Repository

Khamis, Abdullah M.

2016-01-01

Proteins play critical roles in cellular processes of living organisms. It is therefore important to identify and characterize their key properties associated with their functions. Correlating protein’s structural, sequence and physicochemical

Reconsidering the importance of interfacial properties in foam stability

NARCIS (Netherlands)

Wierenga, P.A.; Norel, van L.; Basheva, E.S.

2009-01-01

In food industry, protein isolates are often used to help in the formation and stabilisation of food foams. Subsequently there is great interest in (1) understanding the effect of processing parameters on the functional properties of the isolate, and (2) methods and techniques that can help to

Identifying phase-space boundaries with Voronoi tessellations

International Nuclear Information System (INIS)

Debnath, Dipsikha; Matchev, Konstantin T.; Gainer, James S.; Kilic, Can; Yang, Yuan-Pao; Kim, Doojin

2016-01-01

Determining the masses of new physics particles appearing in decay chains is an important and longstanding problem in high energy phenomenology. Recently it has been shown that these mass measurements can be improved by utilizing the boundary of the allowed region in the fully differentiable phase space in its full dimensionality. Here we show that the practical challenge of identifying this boundary can be solved using techniques based on the geometric properties of the cells resulting from Voronoi tessellations of the relevant data. The robust detection of such phase-space boundaries in the data could also be used to corroborate a new physics discovery based on a cut-and-count analysis. (orig.)

Identifying phase-space boundaries with Voronoi tessellations

Energy Technology Data Exchange (ETDEWEB)

Debnath, Dipsikha; Matchev, Konstantin T. [University of Florida, Physics Department, Gainesville, FL (United States); Gainer, James S. [University of Hawaii, Department of Physics and Astronomy, Honolulu, HI (United States); Kilic, Can; Yang, Yuan-Pao [The University of Texas at Austin, Theory Group, Department of Physics and Texas Cosmology Center, Austin, TX (United States); Kim, Doojin [University of Florida, Physics Department, Gainesville, FL (United States); CERN, Theory Division, Geneva 23 (Switzerland)

2016-11-15

Determining the masses of new physics particles appearing in decay chains is an important and longstanding problem in high energy phenomenology. Recently it has been shown that these mass measurements can be improved by utilizing the boundary of the allowed region in the fully differentiable phase space in its full dimensionality. Here we show that the practical challenge of identifying this boundary can be solved using techniques based on the geometric properties of the cells resulting from Voronoi tessellations of the relevant data. The robust detection of such phase-space boundaries in the data could also be used to corroborate a new physics discovery based on a cut-and-count analysis. (orig.)

Perceived cultural importance and actual self-importance of values in cultural identification.

Science.gov (United States)

Wan, Ching; Chiu, Chi-yue; Tam, Kim-pong; Lee, Sau-lai; Lau, Ivy Yee-man; Peng, Siqing

2007-02-01

Cross-cultural psychologists assume that core cultural values define to a large extent what a culture is. Typically, core values are identified through an actual self-importance approach, in which core values are those that members of the culture as a group strongly endorse. In this article, the authors propose a perceived cultural importance approach to identifying core values, in which core values are values that members of the culture as a group generally believe to be important in the culture. In 5 studies, the authors examine the utility of the perceived cultural importance approach. Results consistently showed that, compared with values of high actual self-importance, values of high perceived cultural importance play a more important role in cultural identification. These findings have important implications for conceptualizing and measuring cultures. ((c) 2007 APA, all rights reserved).

Investigations on Important Properties of the 10 cm x 10 cm GEM Prototype

CERN Document Server

Saenboonruang, Kiadtisak; Kulasri, Kittipong; Ritthirong, Anawat

2015-01-01

The Gas Electron Multiplier (GEM) detector is one of promising particle and radiation detectors that has been improved greatly from previous gas detectors. The improvement includes better spatial resolutions, higher detection rate capabilities, and flexibilities in designs. In particular, the 10 cm x 10 cm GEM prototype is designed and provided by the Gas Detectors Development group (GDD) at CERN, Switzerland. With its simplicity in operations and designs, while still maintaining high qualities, the GEM prototype is suitable for both start-up and advanced researches. This article aims to report the investigations on some important properties of the 10 cm x 10 cm GEM detector using current measurement and signal counting. Results have shown that gains of the GEM prototype exponentially increase as voltage supplied to the detector increases, while the detector reaches full efficiency (plateau region) when the voltage is greater than 4100 V. In terms of signal sharing between X and Y strips of the readout, X str...

Genomic Regions Affecting Cheese Making Properties Identified in Danish Holsteins

DEFF Research Database (Denmark)

Gregersen, Vivi Raundahl; Bertelsen, Henriette Pasgaard; Poulsen, Nina Aagaard

The cheese renneting process is affected by a number of factors associated to milk composition and a number of Danish Holsteins has previously been identified to have poor milk coagulation ability. Therefore, the aim of this study was to identify genomic regions affecting the technological...

Identifying Important Career Indicators of Undergraduate Geoscience Students Upon Completion of Their Degree

Science.gov (United States)

Wilson, C. E.; Keane, C. M.; Houlton, H. R.

2012-12-01

The American Geosciences Institute (AGI) decided to create the National Geoscience Student Exit Survey in order to identify the initial pathways into the workforce for these graduating students, as well as assess their preparedness for entering the workforce upon graduation. The creation of this survey stemmed from a combination of experiences with the AGI/AGU Survey of Doctorates and discussions at the following Science Education Research Center (SERC) workshops: "Developing Pathways to Strong Programs for the Future", "Strengthening Your Geoscience Program", and "Assessing Geoscience Programs". These events identified distinct gaps in understanding the experiences and perspectives of geoscience students during one of their most profound professional transitions. Therefore, the idea for the survey arose as a way to evaluate how the discipline is preparing and educating students, as well as identifying the students' desired career paths. The discussions at the workshops solidified the need for this survey and created the initial framework for the first pilot of the survey. The purpose of this assessment tool is to evaluate student preparedness for entering the geosciences workforce; identify student decision points for entering geosciences fields and remaining in the geosciences workforce; identify geosciences fields that students pursue in undergraduate and graduate school; collect information on students' expected career trajectories and geosciences professions; identify geosciences career sectors that are hiring new graduates; collect information about salary projections; overall effectiveness of geosciences departments regionally and nationally; demonstrate the value of geosciences degrees to future students, the institutions, and employers; and establish a benchmark to perform longitudinal studies of geosciences graduates to understand their career pathways and impacts of their educational experiences on these decisions. AGI's Student Exit Survey went through

Experimental assessment of the importance of amino acid positions identified by an entropy-based correlation analysis of multiple-sequence alignments.

Science.gov (United States)

Dietrich, Susanne; Borst, Nadine; Schlee, Sandra; Schneider, Daniel; Janda, Jan-Oliver; Sterner, Reinhard; Merkl, Rainer

2012-07-17

The analysis of a multiple-sequence alignment (MSA) with correlation methods identifies pairs of residue positions whose occupation with amino acids changes in a concerted manner. It is plausible to assume that positions that are part of many such correlation pairs are important for protein function or stability. We have used the algorithm H2r to identify positions k in the MSAs of the enzymes anthranilate phosphoribosyl transferase (AnPRT) and indole-3-glycerol phosphate synthase (IGPS) that show a high conn(k) value, i.e., a large number of significant correlations in which k is involved. The importance of the identified residues was experimentally validated by performing mutagenesis studies with sAnPRT and sIGPS from the archaeon Sulfolobus solfataricus. For sAnPRT, five H2r mutant proteins were generated by replacing nonconserved residues with alanine or the prevalent residue of the MSA. As a control, five residues with conn(k) values of zero were chosen randomly and replaced with alanine. The catalytic activities and conformational stabilities of the H2r and control mutant proteins were analyzed by steady-state enzyme kinetics and thermal unfolding studies. Compared to wild-type sAnPRT, the catalytic efficiencies (k(cat)/K(M)) were largely unaltered. In contrast, the apparent thermal unfolding temperature (T(M)(app)) was lowered in most proteins. Remarkably, the strongest observed destabilization (ΔT(M)(app) = 14 °C) was caused by the V284A exchange, which pertains to the position with the highest correlation signal [conn(k) = 11]. For sIGPS, six H2r mutant and four control proteins with alanine exchanges were generated and characterized. The k(cat)/K(M) values of four H2r mutant proteins were reduced between 13- and 120-fold, and their T(M)(app) values were decreased by up to 5 °C. For the sIGPS control proteins, the observed activity and stability decreases were much less severe. Our findings demonstrate that positions with high conn(k) values have an

Identifying lubricant options for compressor bearing designs

Science.gov (United States)

Karnaz, J.; Seeton, C.; Dixon, L.

2017-08-01

Today’s refrigeration and air conditioning market is not only driven by the environmental aspects of the refrigerants, but also by the energy efficiency and reliability of system operation. Numerous types of compressor designs are used in refrigeration and air conditioning applications which means that different bearings are used; and in some cases, multiple bearing types within a single compressor. Since only one lubricant is used, it is important to try to optimize the lubricant to meet the various demands and requirements for operation. This optimization entails investigating different types of lubricant chemistries, viscosities, and various formulation options. What makes evaluating these options more challenging is the refrigerant which changes the properties of the lubricant delivered to the bearing. Once the lubricant and refrigerant interaction are understood, through various test methods, then work can start on collaborating with compressor engineers on identifying the lubricant chemistry and formulation options. These interaction properties are important to the design engineer to make decisions on the adequacy of the lubricant before compressor tests are started. This paper will discuss the process to evaluate lubricants for various types of compressors and bearing design with focus on what’s needed for current refrigerant trends. In addition, the paper will show how the lubricant chemistry choice can be manipulated through understanding of the bearing design and knowledge of interaction with the refrigerant to maximize performance. Emphasis will be placed on evaluation of synthetic lubricants for both natural and synthetic low GWP refrigerants.

The relative importance of climate and vegetation properties on patterns of North American breeding bird species richness

International Nuclear Information System (INIS)

Goetz, Scott J; Sun, Mindy; Zolkos, Scott; Hansen, Andy; Dubayah, Ralph

2014-01-01

Recent advances in remote sensing and ecological modeling warrant a timely and robust investigation of the ecological variables that underlie large-scale patterns of breeding bird species richness, particularly in the context of intensifying land use and climate change. Our objective was to address this need using an array of bioclimatic and remotely sensed data sets representing vegetation properties and structure, and other aspects of the physical environment. We first build models of bird species richness across breeding bird survey (BBS) routes, and then spatially predict richness across the coterminous US at moderately high spatial resolution (1 km). Predictor variables were derived from various sources and maps of species richness were generated for four groups (guilds) of birds with different breeding habitat affiliation (forest, grassland, open woodland, scrub/shrub), as well as all guilds combined. Predictions of forest bird distributions were strong (R 2 = 0.85), followed by grassland (0.76), scrub/shrub (0.63) and open woodland (0.60) species. Vegetation properties were generally the strongest determinants of species richness, whereas bioclimatic and lidar-derived vertical structure metrics were of variable importance and dependent upon the guild type. Environmental variables (climate and the physical environment) were also frequently selected predictors, but canopy structure variables were not as important as expected based on more local to regional scale studies. Relatively sparse sampling of canopy structure metrics from the satellite lidar sensor may have reduced their importance relative to other predictor variables across the study domain. We discuss these results in the context of the ecological drivers of species richness patterns, the spatial scale of bird diversity analyses, and the potential of next generation space-borne lidar systems relevant to vegetation and ecosystem studies. This study strengthens current understanding of bird species�

A landscape ecology approach identifies important drivers of urban biodiversity.

Science.gov (United States)

Turrini, Tabea; Knop, Eva

2015-04-01

Cities are growing rapidly worldwide, yet a mechanistic understanding of the impact of urbanization on biodiversity is lacking. We assessed the impact of urbanization on arthropod diversity (species richness and evenness) and abundance in a study of six cities and nearby intensively managed agricultural areas. Within the urban ecosystem, we disentangled the relative importance of two key landscape factors affecting biodiversity, namely the amount of vegetated area and patch isolation. To do so, we a priori selected sites that independently varied in the amount of vegetated area in the surrounding landscape at the 500-m scale and patch isolation at the 100-m scale, and we hold local patch characteristics constant. As indicator groups, we used bugs, beetles, leafhoppers, and spiders. Compared to intensively managed agricultural ecosystems, urban ecosystems supported a higher abundance of most indicator groups, a higher number of bug species, and a lower evenness of bug and beetle species. Within cities, a high amount of vegetated area increased species richness and abundance of most arthropod groups, whereas evenness showed no clear pattern. Patch isolation played only a limited role in urban ecosystems, which contrasts findings from agro-ecological studies. Our results show that urban areas can harbor a similar arthropod diversity and abundance compared to intensively managed agricultural ecosystems. Further, negative consequences of urbanization on arthropod diversity can be mitigated by providing sufficient vegetated space in the urban area, while patch connectivity is less important in an urban context. This highlights the need for applying a landscape ecological approach to understand the mechanisms shaping urban biodiversity and underlines the potential of appropriate urban planning for mitigating biodiversity loss. © 2015 John Wiley & Sons Ltd.

Synthesis, Properties and Mineralogy of Important Inorganic Materials

DEFF Research Database (Denmark)

Warner, Terence Edwin

chosen so as to illustrate the large variety of physico-chemical properties encountered in inorganic materials, and to provide practical experience covering a wide range of preparative methods, with an emphasis on high-temperature techniques. The majority of the materials described in the book relate...... in extending their repertoire of teaching material into the realms of high-temperature synthesis. It is also of interest to professional chemists, physicists, materials scientists and technologists, ceramicists, mineralogists, geologists, geochemists, archaeologists, metallurgists, engineers, and non......-specialists, who are interested in learning more about how technological ceramic materials and artificial minerals are made. Finally, the author assumes that the reader is familiar with the basic principles and concepts of materials chemistry (or at least has access to such knowledge), such as; thermodynamic...

Effects of excipients on the tensile strength, surface properties and free volume of Klucel® free films of pharmaceutical importance

International Nuclear Information System (INIS)

Gottnek, Mihály; Süvegh, Károly; Pintye-Hódi, Klára; Regdon, Géza

2013-01-01

The physicochemical properties of polymers planned to be applied as mucoadhesive films were studied. Two types of Klucel ® hydroxypropylcellulose (LF and MF) were used as film-forming polymers. Hydroxypropylcellulose was incorporated in 2 w/w% with glycerol and xylitol as excipients and lidocaine base as an active ingredient at 5, 10 or 15 w/w% of the mass of the film-forming polymer. The free volume changes of the films were investigated by positron annihilation lifetime spectroscopy, the mechanical properties of the samples were measured with a tensile strength tester and contact angles were determined to assess the surface properties of the films. It was found that the Klucel ® MF films had better physicochemical properties than those of the LF films. Klucel ® MF as a film-forming polymer with lidocaine base and both excipients at 5 w/w% exhibited physicochemical properties and good workability. The excipients proved to exert strong effects on the physicochemical properties of the tested systems and it is very important to study them intensively in preformulation studies in the pharmaceutical technology in order to utilise their benefits and to avoid any disadvantageous effects. - Highlights: • Glycerol increases, whereas xylitol decreases the free volume of both LF and MF HPC. • Both xylitol and glycerol increase the tensile strength of MF films. • The tensile strength of the MF product makes it suitable for pharmaceutical use. • The surface properties reveal a macroscopically stable film structure. • All measurements indicate a macroscopically homogeneous film structure

Spectral Data Captures Important Variability Between and Among Species and Functional Types

Science.gov (United States)

Townsend, P. A.; Serbin, S. P.; Kingdon, C.; Singh, A.; Couture, J. J.; Gamon, J. A.

2013-12-01

different genotypes of aspen. A clonal species, aspen is widely recognized for its high genotypic and phenotypic variability, and this variability expresses itself in differences in both functional and spectral traits. We demonstrate that spectral characteristics can be used to identify different genets of aspen and that this spectral variability among genets is also related to differences in traits important to ecosystem processes. Third, we illustrate variability in spectral properties of soybean related to the presence of aphids, and how those spectral properties translate to differences in yield. Finally, we show how short-term variability in milkweed spectra (within hours) is related to changes in cardenolide concentrations associated with induced defensive responses. These results demonstrate the capacity of spectroscopy to not just characterize important plant traits, but also to measure how plants vary naturally and respond dynamically to environmental changes.

Parameter identifiability and redundancy: theoretical considerations.

Directory of Open Access Journals (Sweden)

Mark P Little

Full Text Available BACKGROUND: Models for complex biological systems may involve a large number of parameters. It may well be that some of these parameters cannot be derived from observed data via regression techniques. Such parameters are said to be unidentifiable, the remaining parameters being identifiable. Closely related to this idea is that of redundancy, that a set of parameters can be expressed in terms of some smaller set. Before data is analysed it is critical to determine which model parameters are identifiable or redundant to avoid ill-defined and poorly convergent regression. METHODOLOGY/PRINCIPAL FINDINGS: In this paper we outline general considerations on parameter identifiability, and introduce the notion of weak local identifiability and gradient weak local identifiability. These are based on local properties of the likelihood, in particular the rank of the Hessian matrix. We relate these to the notions of parameter identifiability and redundancy previously introduced by Rothenberg (Econometrica 39 (1971 577-591 and Catchpole and Morgan (Biometrika 84 (1997 187-196. Within the widely used exponential family, parameter irredundancy, local identifiability, gradient weak local identifiability and weak local identifiability are shown to be largely equivalent. We consider applications to a recently developed class of cancer models of Little and Wright (Math Biosciences 183 (2003 111-134 and Little et al. (J Theoret Biol 254 (2008 229-238 that generalize a large number of other recently used quasi-biological cancer models. CONCLUSIONS/SIGNIFICANCE: We have shown that the previously developed concepts of parameter local identifiability and redundancy are closely related to the apparently weaker properties of weak local identifiability and gradient weak local identifiability--within the widely used exponential family these concepts largely coincide.

Mechanical Properties of a Library of Low-Band-Gap Polymers

DEFF Research Database (Denmark)

Roth, Bérenger; Savagatrup, Suchol; de los Santos, Nathaniel V.

2016-01-01

The mechanical properties of low-band-gap polymers are important for the long-term survivability of roll to-roll processed organic electronic devices. Such devices, e.g., solar cells, displays, and thin-film transistors, must survive the rigors of roll-to-roll coating and also thermal...... of low-band-gap polymers to better understand the connection between molecular structures and mechanical properties in order to design conjugated polymers that permit mechanical robustness and even extreme deformability. While one of the principal conclusions of these experiments is that the structure...... of an isolated molecule only partially determines the mechanical properties another important codeterminant is the packing structure some general trends can be identified. (1) Fused rings tend to increase the modulus and decrease the ductility. (2) Branched side chains have the opposite effect. Despite...

How important is importance for prospective memory? A review

Directory of Open Access Journals (Sweden)

Stefan eWalter

2014-06-01

Full Text Available Forgetting to carry out an intention as planned can have serious consequences in everyday life. People sometimes even forget intentions that they consider as very important. Here, we review the literature on the impact of importance on prospective memory performance. We highlight different methods used to manipulate the importance of a prospective memory task such as providing rewards, importance relative to other ongoing activities, absolute importance, and providing social motives. Moreover, we address the relationship between importance and other factors known to affect prospective memory and ongoing task performance such as type of prospective memory task (time-, event- or activity-based, cognitive loads, and cue focality. Finally, we provide a connection to motivation, we summarize the effects of task importance and we identify important venues for future research.

How important is importance for prospective memory? A review

Science.gov (United States)

Walter, Stefan; Meier, Beat

2014-01-01

Forgetting to carry out an intention as planned can have serious consequences in everyday life. People sometimes even forget intentions that they consider as very important. Here, we review the literature on the impact of importance on prospective memory performance. We highlight different methods used to manipulate the importance of a prospective memory task such as providing rewards, importance relative to other ongoing activities, absolute importance, and providing social motives. Moreover, we address the relationship between importance and other factors known to affect prospective memory and ongoing task performance such as type of prospective memory task (time-, event-, or activity-based), cognitive loads, and processing overlaps. Finally, we provide a connection to motivation, we summarize the effects of task importance and we identify important venues for future research. PMID:25018743

The Hanford Site N Reactor buildings task identification and evaluation of historic properties

International Nuclear Information System (INIS)

Stapp, D.C.; Marceau, T.E.

1996-01-01

The New Production Reactor complex at Hanford (hereafter referred to as N Reactor) is proposed to be deactivated, decommissioned, and demolished in the coming years. Recognizing that the Hanford Site has been important to the nation, state, and local community, a task was funded to examine the effects that these activities may have on the historic properties of N Reactor. The objectives of the N Reactor buildings task were to identify potential historic properties at N Reactor, to complete Historic Property Inventory forms for all structures considered eligible and ineligible for listing in the National Register of Historic Places, and to prepare a Memorandum of Agreement that identifies the measures required to mitigate any adverse effects

Targeted Lipidomics in Drosophila melanogaster Identifies Novel 2-Monoacylglycerols and N-acyl Amides

Science.gov (United States)

Takacs, Sara M.; Stuart, Jordyn M.; Basnet, Arjun; Raboune, Siham; Widlanski, Theodore S.; Doherty, Patrick; Bradshaw, Heather B.

2013-01-01

Lipid metabolism is critical to coordinate organ development and physiology in response to tissue-autonomous signals and environmental cues. Changes to the availability and signaling of lipid mediators can limit competitiveness, adaptation to environmental stressors, and augment pathological processes. Two classes of lipids, the N-acyl amides and the 2-acyl glycerols, have emerged as important signaling molecules in a wide range of species with important signaling properties, though most of what is known about their cellular functions is from mammalian models. Therefore, expanding available knowledge on the repertoire of these lipids in invertebrates will provide additional avenues of research aimed at elucidating biosynthetic, metabolic, and signaling properties of these molecules. Drosophila melanogaster is a commonly used organism to study intercellular communication, including the functions of bioactive lipids. However, limited information is available on the molecular identity of lipids with putative biological activities in Drosophila. Here, we used a targeted lipidomics approach to identify putative signaling lipids in third instar Drosophila larvae, possessing particularly large lipid mass in their fat body. We identified 2-linoleoyl glycerol, 2-oleoyl glycerol, and 45 N-acyl amides in larval tissues, and validated our findings by the comparative analysis of Oregon-RS, Canton-S and w1118 strains. Data here suggest that Drosophila represent another model system to use for the study of 2-acyl glycerol and N-acyl amide signaling. PMID:23874457

Identifying Important Atlantic Areas for the conservation of Balearic shearwaters: Spatial overlap with conservation areas

Science.gov (United States)

Pérez-Roda, Amparo; Delord, Karine; Boué, Amélie; Arcos, José Manuel; García, David; Micol, Thierry; Weimerskirch, Henri; Pinaud, David; Louzao, Maite

2017-07-01

Marine protected areas (MPAs) are considered one of the main tools in both fisheries and conservation management to protect threatened species and their habitats around the globe. However, MPAs are underrepresented in marine environments compared to terrestrial environments. Within this context, we studied the Atlantic non-breeding distribution of the southern population of Balearic shearwaters (Puffinus mauretanicus) breeding in Eivissa during the 2011-2012 period based on global location sensing (GLS) devices. Our objectives were (1) to identify overall Important Atlantic Areas (IAAs) from a southern population, (2) to describe spatio-temporal patterns of oceanographic habitat use, and (3) to assess whether existing conservation areas (Natura 2000 sites and marine Important Bird Areas (IBAs)) cover the main IAAs of Balearic shearwaters. Our results highlighted that the Atlantic staging (from June to October in 2011) dynamic of the southern population was driven by individual segregation at both spatial and temporal scales. Individuals ranged in the North-East Atlantic over four main IAAs (Bay of Biscay: BoB, Western Iberian shelf: WIS, Gulf of Cadiz: GoC, West of Morocco: WoM). While most individuals spent more time on the WIS or in the GoC, a small number of birds visited IAAs at the extremes of their Atlantic distribution range (i.e., BoB and WoM). The chronology of the arrivals to the IAAs showed a latitudinal gradient with northern areas reached earlier during the Atlantic staging. The IAAs coincided with the most productive areas (higher chlorophyll a values) in the NE Atlantic between July and October. The spatial overlap between IAAs and conservation areas was higher for Natura 2000 sites than marine IBAs (areas with and without legal protection, respectively). Concerning the use of these areas, a slightly higher proportion of estimated positions fell within marine IBAs compared to designated Natura 2000 sites, with Spanish and Portuguese conservation

Buying Imported Products Online : A quantitative study about Chinese Online consumer behavior towards imported products

OpenAIRE

Chen, Qianqian; Wang, Yuren

2015-01-01

With the fast growing Chinese online marketplace and the increasing popularity of shopping imported products online in China, more and more practitioners and researchers are interested in understanding the cues that Chinese consumers use to evaluate imported products consumption online. Our quantitative study aims to identify what factors affect the behavior of Chinese online consumers towards imported products and the relationships between the identified factors and purchase intention, and t...

Effects of excipients on the tensile strength, surface properties and free volume of Klucel{sup ®} free films of pharmaceutical importance

Energy Technology Data Exchange (ETDEWEB)

Gottnek, Mihály [Department of Pharmaceutical Technology, University of Szeged, Eötvös utca 6, H-6720 Szeged (Hungary); Süvegh, Károly [Laboratory of Nuclear Chemistry, Eötvös Loránd University, P.O. Box 32, H-1518 Budapest 112 (Hungary); Pintye-Hódi, Klára [Department of Pharmaceutical Technology, University of Szeged, Eötvös utca 6, H-6720 Szeged (Hungary); Regdon, Géza [Department of Pharmaceutical Technology, University of Szeged, Eötvös utca 6, H-6720 Szeged (Hungary)

2013-08-15

The physicochemical properties of polymers planned to be applied as mucoadhesive films were studied. Two types of Klucel{sup ®} hydroxypropylcellulose (LF and MF) were used as film-forming polymers. Hydroxypropylcellulose was incorporated in 2 w/w% with glycerol and xylitol as excipients and lidocaine base as an active ingredient at 5, 10 or 15 w/w% of the mass of the film-forming polymer. The free volume changes of the films were investigated by positron annihilation lifetime spectroscopy, the mechanical properties of the samples were measured with a tensile strength tester and contact angles were determined to assess the surface properties of the films. It was found that the Klucel{sup ®} MF films had better physicochemical properties than those of the LF films. Klucel{sup ®} MF as a film-forming polymer with lidocaine base and both excipients at 5 w/w% exhibited physicochemical properties and good workability. The excipients proved to exert strong effects on the physicochemical properties of the tested systems and it is very important to study them intensively in preformulation studies in the pharmaceutical technology in order to utilise their benefits and to avoid any disadvantageous effects. - Highlights: • Glycerol increases, whereas xylitol decreases the free volume of both LF and MF HPC. • Both xylitol and glycerol increase the tensile strength of MF films. • The tensile strength of the MF product makes it suitable for pharmaceutical use. • The surface properties reveal a macroscopically stable film structure. • All measurements indicate a macroscopically homogeneous film structure.

Dynamics in microbial communities: Unraveling mechanisms to identify principles

Energy Technology Data Exchange (ETDEWEB)

Konopka, Allan; Lindemann, Stephen R.; Fredrickson, Jim K.

2015-07-01

Diversity begets higher order properties such as functional stability and robustness in microbial communities, but principles that inform conceptual (and eventually predictive) models of community dynamics are lacking. Recent work has shown that selection as well as dispersal and drift shape communities, but the mechanistic bases for assembly of communities and the forces that maintain their function in the face of environmental perturbation are not well understood. Conceptually, some interactions among community members could generate endogenous dynamics in composition, even in the absence of environmental changes. These endogenous dynamics are further perturbed by exogenous forcing factors to produce a richer network of community interactions, and it is this “system” that is the basis for higher order community properties. Elucidation of principles that follow from this conceptual model requires identifying the mechanisms that (a) optimize diversity within a community and (b) impart community stability. The network of interactions between organisms can be an important element by providing a buffer against disturbance beyond the effect of functional redundancy, as alternative pathways with different combinations of microbes can be recruited to fulfill specific functions.

Exploring the spatial variation in quality-adjusted rental prices and identifying hot spots in Berlin’s residential property market

DEFF Research Database (Denmark)

Meulen, Philipp an de; Mitze, Timo Friedel

2014-01-01

In this work, we use residual values obtained from an estimated hedonic pricing model to assess the role of district-level neighbourhood effects for the spatial variation in quality-adjusted rental prices in Berlin between 2008 and 2013. By doing so, we also aim at identifying hot and cold spots ...... analysis (ESDA) toolbox, we finally pinpoint particular hot spots of the city’s residential property market associated with a significant spatial clustering of similar rental price values around individual observations....... proximity to the city centre compared to similar properties in Berlin’s periphery once we control for the properties’ physical characteristics. The observed temporal evolution of the rental price distribution between 2008 and 2013 thereby hints at an ongoing gentrification process in Germany’s capital...... associated with the current housing market boom. This visual impression is also confirmed by the application of quantile regressions for a correlation analysis between quality-adjusted rental price values and Berlin district-level characteristics obtained from the last census in 2011. Among other factors, we...

The importance of habitat resistance for movement decisions in the common lizard, Lacerta vivipara

Directory of Open Access Journals (Sweden)

Zajitschek Susanne RK

2012-07-01

Full Text Available Abstract Background Movement behaviour can be influenced by a multitude of biotic and abiotic factors. Here, we investigate the speed of movement in relation to environmental and individual phenotypic properties in subadult common lizards (Lacerta vivipara. We aim to disentangle the importance of substrate, cover, humidity, basking opportunity and individual phenotype on moving tendencies in 12 treatment combinations, at which each lizard was tested. Results We find that movement behaviour depends on the starting conditions, the physical properties of the dispersal corridor, and on the individuals’ phenotype. Specifically, the presence of cover and substrate providing suitable traction in the corridor had positive effects on individual movement decisions. Additionally, we find high phenotypic variation in the propensity to move dependent on the presence of cover. Individual back patterns also strongly affected movement decisions in interaction with the physical properties of the dispersal corridor. Conclusions Our results highlight the importance of understanding the habitat resistance for movement patterns, with humid habitats with covering vegetation providing the best conditions to initiate movement in the common lizard. In addition, population effects, differences in back pattern phenotype and individual plasticity were identified as key parameters influencing movement behaviour.

Thoughts on identifiers

CERN Multimedia

CERN. Geneva

2005-01-01

As business processes and information transactions have become an inextricably intertwined with the Web, the importance of assignment, registration, discovery, and maintenance of identifiers has increased. In spite of this, integrated frameworks for managing identifiers have been slow to emerge. Instead, identification systems arise (quite naturally) from immediate business needs without consideration for how they fit into larger information architectures. In addition, many legacy identifier systems further complicate the landscape, making it difficult for content managers to select and deploy identifier systems that meet both the business case and long term information management objectives. This presentation will outline a model for evaluating identifier applications and the functional requirements of the systems necessary to support them. The model is based on a layered analysis of the characteristics of identifier systems, including: * Functional characteristics * Technology * Policy * Business * Social T...

The Fermi LAT Very Important Project (VIP) List of Active Galactic Nuclei

Science.gov (United States)

Thompson, David J.; Fermi Large Area Telescope Collaboration

2018-01-01

Using nine years of Fermi Gamma-ray Space Telescope Large Area Telescope (LAT) observations, we have identified 30 projects for Active Galactic Nuclei (AGN) that appear to provide strong prospects for significant scientific advances. This Very Important Project (VIP) AGN list includes AGNs that have good multiwavelength coverage, are regularly detected by the Fermi LAT, and offer scientifically interesting timing or spectral properties. Each project has one or more LAT scientists identified who are actively monitoring the source. They will be regularly updating the LAT results for these VIP AGNs, working together with multiwavelength observers and theorists to maximize the scientific return during the coming years of the Fermi mission. See https://confluence.slac.stanford.edu/display/GLAMCOG/VIP+List+of+AGNs+for+Continued+Study

Spectroscopic properties of rare earths in optical materials

CERN Document Server

Parisi, Jürgen; Osgood, R; Warlimont, Hans; Liu, Guokui; Jacquier, Bernard

2005-01-01

Aimed at researchers and graduate students, this book provides up-to-date information for understanding electronic interactions that impact the optical properties of rare earth ions in solids. Its goal is to establish a connection between fundamental principles and the materials properties of rare-earth activated luminescent and laser optical materials. The theoretical survey and introduction to spectroscopic properties include electronic energy level structure, intensities of optical transitions, ion-phonon interactions, line broadening, and energy transfer and up-conversion. An important aspect of the book lies in its deep and detailed discussions on materials properties and the potential of new applications such as optical storage, information processing, nanophotonics, and molecular probes that have been identified in recent experimental studies. This volume will be a valuable reference book on advanced topics of rare earth spectroscopy and materials science.

An Efficient Metric of Automatic Weight Generation for Properties in Instance Matching Technique

OpenAIRE

Seddiqui, Md. Hanif; Nath, Rudra Pratap Deb; Aono, Masaki

2015-01-01

The proliferation of heterogeneous data sources of semantic knowledge base intensifies the need of an automatic instance matching technique. However, the efficiency of instance matching is often influenced by the weight of a property associated to instances. Automatic weight generation is a non-trivial, however an important task in instance matching technique. Therefore, identifying an appropriate metric for generating weight for a property automatically is nevertheless a formidab...

Combining Methods to Describe Important Marine Habitats for Top Predators: Application to Identify Biological Hotspots in Tropical Waters.

Science.gov (United States)

Thiers, Laurie; Louzao, Maite; Ridoux, Vincent; Le Corre, Matthieu; Jaquemet, Sébastien; Weimerskirch, Henri

2014-01-01

In tropical waters resources are usually scarce and patchy, and predatory species generally show specific adaptations for foraging. Tropical seabirds often forage in association with sub-surface predators that create feeding opportunities by bringing prey close to the surface, and the birds often aggregate in large multispecific flocks. Here we hypothesize that frigatebirds, a tropical seabird adapted to foraging with low energetic costs, could be a good predictor of the distribution of their associated predatory species, including other seabirds (e.g. boobies, terns) and subsurface predators (e.g., dolphins, tunas). To test this hypothesis, we compared distribution patterns of marine predators in the Mozambique Channel based on a long-term dataset of both vessel- and aerial surveys, as well as tracking data of frigatebirds. By developing species distribution models (SDMs), we identified key marine areas for tropical predators in relation to contemporaneous oceanographic features to investigate multi-species spatial overlap areas and identify predator hotspots in the Mozambique Channel. SDMs reasonably matched observed patterns and both static (e.g. bathymetry) and dynamic (e.g. Chlorophyll a concentration and sea surface temperature) factors were important explaining predator distribution patterns. We found that the distribution of frigatebirds included the distributions of the associated species. The central part of the channel appeared to be the best habitat for the four groups of species considered in this study (frigatebirds, brown terns, boobies and sub-surface predators).

Combining Methods to Describe Important Marine Habitats for Top Predators: Application to Identify Biological Hotspots in Tropical Waters.

Directory of Open Access Journals (Sweden)

Laurie Thiers

Full Text Available In tropical waters resources are usually scarce and patchy, and predatory species generally show specific adaptations for foraging. Tropical seabirds often forage in association with sub-surface predators that create feeding opportunities by bringing prey close to the surface, and the birds often aggregate in large multispecific flocks. Here we hypothesize that frigatebirds, a tropical seabird adapted to foraging with low energetic costs, could be a good predictor of the distribution of their associated predatory species, including other seabirds (e.g. boobies, terns and subsurface predators (e.g., dolphins, tunas. To test this hypothesis, we compared distribution patterns of marine predators in the Mozambique Channel based on a long-term dataset of both vessel- and aerial surveys, as well as tracking data of frigatebirds. By developing species distribution models (SDMs, we identified key marine areas for tropical predators in relation to contemporaneous oceanographic features to investigate multi-species spatial overlap areas and identify predator hotspots in the Mozambique Channel. SDMs reasonably matched observed patterns and both static (e.g. bathymetry and dynamic (e.g. Chlorophyll a concentration and sea surface temperature factors were important explaining predator distribution patterns. We found that the distribution of frigatebirds included the distributions of the associated species. The central part of the channel appeared to be the best habitat for the four groups of species considered in this study (frigatebirds, brown terns, boobies and sub-surface predators.

Efflux inhibitor suppresses Streptococcus mutans virulence properties.

Science.gov (United States)

Zeng, Huihui; Liu, Jia; Ling, Junqi

2017-04-01

It is well established that efflux pumps play important roles in bacterial pathogenicity and efflux inhibitors (EIs) have been proved to be effective in suppressing bacterial virulence properties. However, little is known regarding the EI of Streptococcus mutans, a well-known caries-inducing bacterium. In this study, we identified the EI of S. mutans through ethidium bromide efflux assay and investigated how EI affected S. mutans virulence regarding the cariogenicity and stress response. Results indicated that reserpine, the identified EI, suppressed acid tolerance, mutacin production and transformation efficiency of S. mutans, and modified biofilm architecture and extracellular polysaccharide distribution. Suppressed glycosyltransferase activity was also noted after reserpine exposure. The data from quantitative real-time-PCR demonstrated that reserpine significantly altered the expression profile of quorum-sensing and virulence-associated genes. These findings suggest that reserpine represents a promising adjunct anticariogenic agent in that it suppresses virulence properties of S. mutans. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Identifying and annotating human bifunctional RNAs reveals their versatile functions.

Science.gov (United States)

Chen, Geng; Yang, Juan; Chen, Jiwei; Song, Yunjie; Cao, Ruifang; Shi, Tieliu; Shi, Leming

2016-10-01

Bifunctional RNAs that possess both protein-coding and noncoding functional properties were less explored and poorly understood. Here we systematically explored the characteristics and functions of such human bifunctional RNAs by integrating tandem mass spectrometry and RNA-seq data. We first constructed a pipeline to identify and annotate bifunctional RNAs, leading to the characterization of 132 high-confidence bifunctional RNAs. Our analyses indicate that bifunctional RNAs may be involved in human embryonic development and can be functional in diverse tissues. Moreover, bifunctional RNAs could interact with multiple miRNAs and RNA-binding proteins to exert their corresponding roles. Bifunctional RNAs may also function as competing endogenous RNAs to regulate the expression of many genes by competing for common targeting miRNAs. Finally, somatic mutations of diverse carcinomas may generate harmful effect on corresponding bifunctional RNAs. Collectively, our study not only provides the pipeline for identifying and annotating bifunctional RNAs but also reveals their important gene-regulatory functions.

Property impacts on Carbon Capture and Storage (CCS) processes: A review

International Nuclear Information System (INIS)

Tan, Yuting; Nookuea, Worrada; Li, Hailong; Thorin, Eva; Yan, Jinyue

2016-01-01

Highlights: • Property impacts on CCS processes have been reviewed. • Properties were ranked and priority of properties in model development was analyzed. • Relevant properties in the design and operation of CCS processes have been identified. • The studied CCS processes include CO_2 capture, conditioning, transport and storage. - Abstract: The knowledge of thermodynamic and transport properties of CO_2-mixtures is important for designing and operating different processes in carbon capture and storage systems. A literature survey was conducted to review the impact of uncertainty in thermos-physical properties on the design and operation of components and processes involved in CO_2 capture, conditioning, transport and storage. According to the existing studies on property impacts, liquid phase viscosity and diffusivity as well as gas phase diffusivity significantly impact the process simulation and absorber design for chemical absorption. Moreover, the phase equilibrium is important for regenerating energy estimation. For CO_2 compression and pumping processes, thermos-physical properties have more obvious impacts on pumps than on compressors. Heat capacity, density, enthalpy and entropy are the most important properties in the pumping process, whereas the compression process is more sensitive to heat capacity and compressibility. In the condensation and liquefaction process, the impacts of density, enthalpy and entropy are low on heat exchangers. For the transport process, existing studies mainly focused on property impacts on the performance of pipeline steady flow processes. Among the properties, density and heat capacity are most important. In the storage process, density and viscosity have received the most attention in property impact studies and were regarded as the most important properties in terms of storage capacity and enhanced oil recovery rate. However, for physical absorption, physical adsorption and membrane separation, there has been a

Importance of the Recurrent Tax on Immovable Property in the Tax Systems of EU Countries

OpenAIRE

Břetislav Andrlík; Lucie Formanová

2014-01-01

This paper deals with the issue of the recurrent tax on immovable property and its significance in the tax systems of the EU Member States. The recurrent tax on immovable property is classified as property taxes, also according to the international methodology of the classification of taxes. This tax is imposed on the owners (in some cases on the lessee or user) of the immovable property in the various tax jurisdictions and belong to the taxes that the taxpayer cannot avoid and from this pers...

76 FR 27377 - Additional Identifying Information Associated With Persons Whose Property and Interests in...

Science.gov (United States)

2011-05-11

... 13572 of April 29, 2011, ``Blocking Property of Certain Persons With Respect to Human Rights Abuses in... 29, 2011, ``Blocking Property of Certain Persons with Respect to Human Rights Abuses in Syria... Emergency Economic Powers Act (50 U.S.C. 1701-06). In the Order, the President expanded the scope of the...

The Budding Yeast “Saccharomyces cerevisiae” as a Drug Discovery Tool to Identify Plant-Derived Natural Products with Anti-Proliferative Properties

Directory of Open Access Journals (Sweden)

Bouchra Qaddouri

2011-01-01

Full Text Available The budding yeast Saccharomyces cerevisiae is a valuable system to study cell-cycle regulation, which is defective in cancer cells. Due to the highly conserved nature of the cell-cycle machinery between yeast and humans, yeast studies are directly relevant to anticancer-drug discovery. The budding yeast is also an excellent model system for identifying and studying antifungal compounds because of the functional conservation of fungal genes. Moreover, yeast studies have also contributed greatly to our understanding of the biological targets and modes of action of bioactive compounds. Understanding the mechanism of action of clinically relevant compounds is essential for the design of improved second-generation molecules. Here we describe our methodology for screening a library of plant-derived natural products in yeast in order to identify and characterize new compounds with anti-proliferative properties.

Chronic alcohol abuse in men alters bone mechanical properties by affecting both tissue mechanical properties and microarchitectural parameters.

Science.gov (United States)

Cruel, M; Granke, M; Bosser, C; Audran, M; Hoc, T

2017-06-01

Alcohol-induced secondary osteoporosis in men has been characterized by higher fracture prevalence and a modification of bone microarchitecture. Chronic alcohol consumption impairs bone cell activity and results in an increased fragility. A few studies highlighted effects of heavy alcohol consumption on some microarchitectural parameters of trabecular bone. But to date and to our knowledge, micro- and macro-mechanical properties of bone of alcoholic subjects have not been investigated. In the present study, mechanical properties and microarchitecture of trabecular bone samples from the iliac crest of alcoholic male patients (n=15) were analyzed and compared to a control group (n=8). Nanoindentation tests were performed to determine the tissue's micromechanical properties, micro-computed tomography was used to measure microarchitectural parameters, and numerical simulations provided the apparent mechanical properties of the samples. Compared to controls, bone tissue from alcoholic patients exhibited an increase of micromechanical properties at tissue scale, a significant decrease of apparent mechanical properties at sample scale, and significant changes in several microarchitectural parameters. In particular, a crucial role of structure model index (SMI) on mechanical properties was identified. 3D microarchitectural parameters are at least as important as bone volume fraction to predict bone fracture risk in the case of alcoholic patients. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Selection of components based on their importance

International Nuclear Information System (INIS)

Stvan, F.

2004-12-01

A proposal is presented for sorting components of the Dukovany nuclear power plant with respect to their importance. The classification scheme includes property priority, property criticality and property structure. Each area has its criteria with weight coefficients to calculate the importance of each component by the Risk Priority Number method. The aim of the process is to generate a list of components in order of operating and safety importance, which will help spend funds to ensure operation and safety in an optimal manner. This proposal is linked to a proposal for a simple database which should serve to enter information and perform assessments. The present stage focused on a safety assessment of components categorized in safety classes BT1, BT2 and BT3 pursuant to Decree No. 76. Assessment was performed based ona PSE study for Level 1. The database includes inputs for entering financial data, which are represented by a potential damage resulting from the given failure and by the loss of MWh in financial terms. In a next input, the failure incidence intensity and time of correction can be entered. Information regarding the property structure, represented by the degree of backup and reparability of the component, is the last input available

Genome-wide association study identified copy number variants important for appendicular lean mass.

Science.gov (United States)

Ran, Shu; Liu, Yong-Jun; Zhang, Lei; Pei, Yufang; Yang, Tie-Lin; Hai, Rong; Han, Ying-Ying; Lin, Yong; Tian, Qing; Deng, Hong-Wen

2014-01-01

Skeletal muscle is a major component of the human body. Age-related loss of muscle mass and function contributes to some public health problems such as sarcopenia and osteoporosis. Skeletal muscle, mainly composed of appendicular lean mass (ALM), is a heritable trait. Copy number variation (CNV) is a common type of human genome variant which may play an important role in the etiology of many human diseases. In this study, we performed genome-wide association analyses of CNV for ALM in 2,286 Caucasian subjects. We then replicated the major findings in 1,627 Chinese subjects. Two CNVs, CNV1191 and CNV2580, were detected to be associated with ALM (p = 2.26×10(-2) and 3.34×10(-3), respectively). In the Chinese replication sample, the two CNVs achieved p-values of 3.26×10(-2) and 0.107, respectively. CNV1191 covers a gene, GTPase of the immunity-associated protein family (GIMAP1), which is important for skeletal muscle cell survival/death in humans. CNV2580 is located in the Serine hydrolase-like protein (SERHL) gene, which plays an important role in normal peroxisome function and skeletal muscle growth in response to mechanical stimuli. In summary, our study suggested two novel CNVs and the related genes that may contribute to variation in ALM.

Genome-wide association study identified copy number variants important for appendicular lean mass.

Directory of Open Access Journals (Sweden)

Shu Ran

Full Text Available Skeletal muscle is a major component of the human body. Age-related loss of muscle mass and function contributes to some public health problems such as sarcopenia and osteoporosis. Skeletal muscle, mainly composed of appendicular lean mass (ALM, is a heritable trait. Copy number variation (CNV is a common type of human genome variant which may play an important role in the etiology of many human diseases. In this study, we performed genome-wide association analyses of CNV for ALM in 2,286 Caucasian subjects. We then replicated the major findings in 1,627 Chinese subjects. Two CNVs, CNV1191 and CNV2580, were detected to be associated with ALM (p = 2.26×10(-2 and 3.34×10(-3, respectively. In the Chinese replication sample, the two CNVs achieved p-values of 3.26×10(-2 and 0.107, respectively. CNV1191 covers a gene, GTPase of the immunity-associated protein family (GIMAP1, which is important for skeletal muscle cell survival/death in humans. CNV2580 is located in the Serine hydrolase-like protein (SERHL gene, which plays an important role in normal peroxisome function and skeletal muscle growth in response to mechanical stimuli. In summary, our study suggested two novel CNVs and the related genes that may contribute to variation in ALM.

Identifying obstacles and ranking common biological control research priorities for Europe to manage most economically important pests in arable, vegetable and perennial crops.

Science.gov (United States)

Lamichhane, Jay Ram; Bischoff-Schaefer, Monika; Bluemel, Sylvia; Dachbrodt-Saaydeh, Silke; Dreux, Laure; Jansen, Jean-Pierre; Kiss, Jozsef; Köhl, Jürgen; Kudsk, Per; Malausa, Thibaut; Messéan, Antoine; Nicot, Philippe C; Ricci, Pierre; Thibierge, Jérôme; Villeneuve, François

2017-01-01

EU agriculture is currently in transition from conventional crop protection to integrated pest management (IPM). Because biocontrol is a key component of IPM, many European countries recently have intensified their national efforts on biocontrol research and innovation (R&I), although such initiatives are often fragmented. The operational outputs of national efforts would benefit from closer collaboration among stakeholders via transnationally coordinated approaches, as most economically important pests are similar across Europe. This paper proposes a common European framework on biocontrol R&I. It identifies generic R&I bottlenecks and needs as well as priorities for three crop types (arable, vegetable and perennial crops). The existing gap between the market offers of biocontrol solutions and the demand of growers, the lengthy and expensive registration process for biocontrol solutions and their varying effectiveness due to variable climatic conditions and site-specific factors across Europe are key obstacles hindering the development and adoption of biocontrol solutions in Europe. Considering arable, vegetable and perennial crops, a dozen common target pests are identified for each type of crop and ranked by order of importance at European level. Such a ranked list indicates numerous topics on which future joint transnational efforts would be justified. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Statistical Evaluation of the Identified Structural Parameters of an idling Offshore Wind Turbine

International Nuclear Information System (INIS)

Kramers, Hendrik C.; Van der Valk, Paul L.C.; Van Wingerden, Jan-Willem

2016-01-01

With the increased need for renewable energy, new offshore wind farms are being developed at an unprecedented scale. However, as the costs of offshore wind energy are still too high, design optimization and new innovations are required for lowering its cost. The design of modern day offshore wind turbines relies on numerical models for estimating ultimate and fatigue loads of the turbines. The dynamic behavior and the resulting structural loading of the turbines is determined for a large part by its structural properties, such as the natural frequencies and damping ratios. Hence, it is important to obtain accurate estimates of these modal properties. For this purpose stochastic subspace identification (SSI), in combination with clustering and statistical evaluation methods, is used to obtain the variance of the identified modal properties of an installed 3.6MW offshore wind turbine in idling conditions. It is found that one is able to obtain confidence intervals for the means of eigenfrequencies and damping ratios of the fore-aft and side-side modes of the wind turbine. (paper)

Intellectual Property Rights, Parallel Imports and Strategic Behavior

OpenAIRE

Maskus, Keith E.; Ganslandt, Mattias

2007-01-01

The existence of parallel imports (PI) raises a number of interesting policy and strategic questions, which are the subject of this survey article. For example, parallel trade is essentially arbitrage within policy-integrated markets of IPR-protected goods, which may have different prices across countries. Thus, we analyze fully two types of price differences that give rise to such arbitrage. First is simple retail-level trade in horizontal markets because consumer prices may differ. Second i...

Effect of physical, chemical and electro-kinetic properties of pumice samples on radiation shielding properties of pumice material

International Nuclear Information System (INIS)

Tapan, Mücip; Yalçın, Zeynel; İçelli, Orhan; Kara, Hüsnü; Orak, Salim; Özvan, Ali; Depci, Tolga

2014-01-01

Highlights: • Radiation shielding properties of pumice materials are studied. • The relationship between physical, chemical and electro-kinetic properties pumice samples is identified. • The photon atomic parameters are important for the absorber peculiarity of the pumices. - Abstract: Pumice has been used in cement, concrete, brick, and ceramic industries as an additive and aggregate material. In this study, some gamma-ray photon absorption parameters such as the total mass attenuation coefficients, effective atomic number and electronic density have been investigated for six different pumice samples. Numerous values of energy related parameters from low energy (1 keV) to high energy (100 MeV) were calculated using WinXCom programme. The relationship between radiation shielding properties of the pumice samples and their physical, chemical and electro-kinetic properties was evaluated using simple regression analysis. Simple regression analysis indicated a strong correlation between photon energy absorption parameters and density and SiO 2 , Fe 2 O 3 , CaO, MgO, TiO 2 content of pumice samples in this study. It is found that photon energy absorption parameters are not related to electro-kinetic properties of pumice samples

Identifying structural damage with ground penetrating radar

CSIR Research Space (South Africa)

Van Schoor, Abraham M

2008-07-01

Full Text Available Ground penetrating radar (GPR) and electrical resistance tomography (ERT) surveys were conducted in an urban environment in an attempt to identify the cause of severe structural damage to a historically significant residential property...

Use of DNA sequences to identify forensically important fly species and their distribution in the coastal region of Central California.

Science.gov (United States)

Nakano, Angie; Honda, Jeff

2015-08-01

Forensic entomology has gained prominence in recent years, as improvements in DNA technology and molecular methods have allowed insect and other arthropod evidence to become increasingly useful in criminal and civil investigations. However, comprehensive faunal inventories are still needed, including cataloging local DNA sequences for forensically significant Diptera. This multi-year fly-trapping study was built upon and expanded a previous survey of these flies in Santa Clara County, including the addition of genetic barcoding data from collected species of flies. Flies from the families Calliphoridae, Sarcophagidae, and Muscidae were trapped in meat-baited traps set in a variety of locations throughout the county. Flies were identified using morphological features and confirmed by molecular analysis. A total of 16 calliphorid species, 11 sarcophagid species, and four muscid species were collected and differentiated. This study found more species of flies than previous area surveys and established new county records for two calliphorid species: Cynomya cadaverina and Chrysomya rufifacies. Differences were found in fly fauna in different areas of the county, indicating the importance of microclimates in the distribution of these flies. Molecular analysis supported the use of DNA barcoding as an effective method of identifying cryptic fly species. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Measures of risk importance and their applications

International Nuclear Information System (INIS)

Vesely, W.E.; Davis, T.C.; Denning, R.S.; Saltos, N.

1983-07-01

This work is part of a project being conducted for the Division of Risk Analysis (DRA) of the Nuclear Regulatory Commission (NRC). The objectives of the project are to evaluate the importances of containment, the different safety functions, and other various contributers as assessed in probabilistic risk analyses and to identify generic conclusions regarding the importances. Effective display of the importances is an important part of these objectives. To address these objectives, measures of risk importance need to be first identified and then they need to be evaluated for the different risk analyses which have been performed. This report describes the risk importance measures that were defined and were applied to the risk analyses which were performed as part of the Reactor Safety Study Methodology Applications Program (RSSMAP). The risk importance measures defined in this report measure the importance of features not only with regard to risk reduction but also with regard to reliability assurance, or risk maintenance. The goal of this report is not to identify new mathematical formulas for risk importance but to show how importance measures can be interpreted and can be applied

Molecular characterization of NRXN1 deletions from 19,263 clinical microarray cases identifies exons important for neurodevelopmental disease expression

Science.gov (United States)

Lowther, Chelsea; Speevak, Marsha; Armour, Christine M.; Goh, Elaine S.; Graham, Gail E.; Li, Chumei; Zeesman, Susan; Nowaczyk, Malgorzata J.M.; Schultz, Lee-Anne; Morra, Antonella; Nicolson, Rob; Bikangaga, Peter; Samdup, Dawa; Zaazou, Mostafa; Boyd, Kerry; Jung, Jack H.; Siu, Victoria; Rajguru, Manjulata; Goobie, Sharan; Tarnopolsky, Mark A.; Prasad, Chitra; Dick, Paul T.; Hussain, Asmaa S.; Walinga, Margreet; Reijenga, Renske G.; Gazzellone, Matthew; Lionel, Anath C.; Marshall, Christian R.; Scherer, Stephen W.; Stavropoulos, Dimitri J.; McCready, Elizabeth; Bassett, Anne S.

2016-01-01

Purpose The purpose of the current study was to assess the penetrance of NRXN1 deletions. Methods We compared the prevalence and genomic extent of NRXN1 deletions identified among 19,263 clinically referred cases to that of 15,264 controls. The burden of additional clinically relevant CNVs was used as a proxy to estimate the relative penetrance of NRXN1 deletions. Results We identified 41 (0.21%) previously unreported exonic NRXN1 deletions ascertained for developmental delay/intellectual disability, significantly greater than in controls [OR=8.14 (95% CI 2.91–22.72), p< 0.0001)]. Ten (22.7%) of these had a second clinically relevant CNV. Subjects with a deletion near the 3′ end of NRXN1 were significantly more likely to have a second rare CNV than subjects with a 5′ NRXN1 deletion [OR=7.47 (95% CI 2.36–23.61), p=0.0006]. The prevalence of intronic NRXN1 deletions was not statistically different between cases and controls (p=0.618). The majority (63.2%) of intronic NRXN1 deletion cases had a second rare CNV, a two-fold greater prevalence than for exonic NRXN1 deletion cases (p=0.0035). Conclusions The results support the importance of exons near the 5′ end of NRXN1 in the expression of neurodevelopmental disorders. Intronic NRXN1 deletions do not appear to substantially increase the risk for clinical phenotypes. PMID:27195815

Inulin and Oligofructosis: a review about functional properties, prebiotic effects and importance for food industry

Directory of Open Access Journals (Sweden)

Maria Celia de Oliveira Hauly

2002-01-01

Full Text Available Nowadays consumers are more conscious about the relation between food and health. Therefore food industry has been looking for food that has a lot of benefits besides good flavor and appearance. Inulin and oligofructose are fructose polimers, vastly found in plants as storage carbohydrates. They present important functional for the food industry. Both inulin and oligofructose have been used as fiber bulk in food products. Differently from other fibers, they do not add flavor, allowing the food to be improved without changing its viscosity. Inulin and oligofructose have similar nutritional properties. Inulin is more indicated for obtaining products with a low fat content such as ice cream, cake and soup, while oligofructose is indicated for yogurt with a low caloric value and in order to mask the residual flavor from high intensity sweeteners used in food preparation. Research has shown that inulin and oligofructose have prebiotic effects because they are not digestible and they can develop bifidogenic effects, improving the intestinal microflora. The simultaneous use of inulin and oligofructose with probiotic agents in food is recommended for symbiotic effects.

Seed Potato Production and Its Importance

OpenAIRE

Erdoğan ÖZTÜRK; Taşkın POLAT

2017-01-01

Our country has different agricultural regions showed different ecological properties in terms of climate and soil characteristics increase the plant variety. Within this variety the potato is one of the most important plants for agriculture and economic of our country, also it is an important food source for human. It is important to use productive and quality seed for healthy agricultural production. With the using of good quality seed, can be obtained about 20% increase in yield. Certified...

Identifying the influence of the intrinsic defects in Gd-doped ZnO thin-films

KAUST Repository

Flemban, Tahani H.; Sequeira, M. C.; Zhang, Z.; Venkatesh, S.; Alves, E.; Lorenz, K.; Roqan, Iman S.

2016-01-01

Gd-doped ZnO thin films were prepared using pulsed laser deposition at different oxygen pressures and varied Gd concentrations. The effects of oxygen deficiency-related defects on the Gd incorporation, optical and structural properties, were explored by studying the impact of oxygen pressure during deposition and post-growth thermal annealing in vacuum. Rutherford Backscattering Spectrometry revealed that the Gd concentration increases with increasing oxygen pressure for samples grown with the same Gd-doped ZnO target. Unexpectedly, the c-lattice parameter of the samples tends to decrease with increasing Gd concentration, suggesting that Gd-defect complexes play an important role in the structural properties. Using low-temperature photoluminescence(PL), Raman measurements and density functional theory calculations, we identified oxygen vacancies as the dominant intrinsic point defects. PL spectra show a defect band related to oxygen vacancies for samples grown at oxygen deficiency.

Identifying the influence of the intrinsic defects in Gd-doped ZnO thin-films

KAUST Repository

Flemban, Tahani H.

2016-02-08

Gd-doped ZnO thin films were prepared using pulsed laser deposition at different oxygen pressures and varied Gd concentrations. The effects of oxygen deficiency-related defects on the Gd incorporation, optical and structural properties, were explored by studying the impact of oxygen pressure during deposition and post-growth thermal annealing in vacuum. Rutherford Backscattering Spectrometry revealed that the Gd concentration increases with increasing oxygen pressure for samples grown with the same Gd-doped ZnO target. Unexpectedly, the c-lattice parameter of the samples tends to decrease with increasing Gd concentration, suggesting that Gd-defect complexes play an important role in the structural properties. Using low-temperature photoluminescence(PL), Raman measurements and density functional theory calculations, we identified oxygen vacancies as the dominant intrinsic point defects. PL spectra show a defect band related to oxygen vacancies for samples grown at oxygen deficiency.

Electromechanical actuation of buckypaper actuator: Material properties and performance relationships

International Nuclear Information System (INIS)

Cottinet, P.-J.; Souders, C.; Tsai, S.-Y.; Liang, R.; Wang, B.; Zhang, C.

2012-01-01

Carbon nanotubes can be assembled into macroscopic thin film materials called buckypapers. To incorporate buckypaper actuators into engineering systems, it is of high importance to understand their material property-actuation performance relationships in order to model and predict the behavior of these actuators. The electromechanical actuation of macroscopic buckypaper structures and their actuators, including single and multi-walled carbon nanotube buckypapers and aligned single-walled nanotube buckypapers, were analyzed and compared. From the experimental evidence, this Letter discusses the effects of the fundamental material properties, including Young modulus and electrical double layer properties, on actuation performance of the resultant actuators. -- Highlights: ► In this study we identified the figure of merit of the electromechanical conversion. ► Different type of buckypaper was realized and characterized for actuation properties. ► The results demonstrated the potential of Buckypapers/Nafion for actuation

TRIPs Agreement, Important Multilateral WTO Treaty

Directory of Open Access Journals (Sweden)

Oana-Maria Florescu

2006-08-01

Full Text Available This article aims at presenting the content and the frame of the TRIPs. Agreement. It starts by introducing the reader to the terms that defined the world economical climate by the time of the Agreement negociation. Also, it explains the need of having an Agreement on intellectual property rights with impact on the business world. Moreover, the article reviews the main provisions of the Agreement and the most important intellectual property rights.

DNA-SIP identifies sulfate-reducing Clostridia as important toluene degraders in tar-oil-contaminated aquifer sediment

Energy Technology Data Exchange (ETDEWEB)

Winderl, C.; Penning, H.; von Netzer, F.; Meckenstock, R.U.; Lueders, T. [Helmholtz Zentrum Munchen, Neuherberg (Germany)

2010-10-15

Global groundwater resources are constantly challenged by a multitude of contaminants such as aromatic hydrocarbons. Especially in anaerobic habitats, a large diversity of unrecognized microbial populations may be responsible for their degradation. Still, our present understanding of the respective microbiota and their ecophysiology is almost exclusively based on a small number of cultured organisms, mostly within the Proteobacteria. Here, by DNA-based stable isotope probing (SIP), we directly identified the most active sulfate-reducing toluene degraders in a diverse sedimentary microbial community originating from a tar-oil-contaminated aquifer at a former coal gasification plant. On incubation of fresh sediments with {sup 13}C{sub 7}-toluene, the production of both sulfide and (CS{sub 2}){sup 13}CO{sub 2} was clearly coupled to the {sup 13}Clabeling of DNA of microbes related to Desulfosporosinus spp. within the Peptococcaceae (Clostridia). The screening of labeled DNA fractions also suggested a novel benzylsuccinate synthase alpha-subunit (bssA) sequence type previously only detected in the environment to be tentatively affiliated with these degraders. However, carbon flow from the contaminant into degrader DNA was only similar to 50%, pointing toward high ratios of heterotrophic CS{sub 2}-fixation during assimilation of acetyl-CoA originating from the contaminant by these degraders. These findings demonstrate that the importance of non-proteobacterial populations in anaerobic aromatics degradation, as well as their specific ecophysiology in the subsurface may still be largely ungrasped.

High throughput phenotypic selection of Mycobacterium tuberculosis mutants with impaired resistance to reactive oxygen species identifies genes important for intracellular growth.

Directory of Open Access Journals (Sweden)

Olga Mestre

Full Text Available Mycobacterium tuberculosis has the remarkable capacity to survive within the hostile environment of the macrophage, and to resist potent antibacterial molecules such as reactive oxygen species (ROS. Thus, understanding mycobacterial resistance mechanisms against ROS may contribute to the development of new anti-tuberculosis therapies. Here we identified genes involved in such mechanisms by screening a high-density transposon mutant library, and we show that several of them are involved in the intracellular lifestyle of the pathogen. Many of these genes were found to play a part in cell envelope functions, further strengthening the important role of the mycobacterial cell envelope in protection against aggressions such as the ones caused by ROS inside host cells.

Willingness to Use Microbicides Is Affected by the Importance of Product Characteristics, Use Parameters, and Protective Properties

Science.gov (United States)

Morrow, Kathleen M.; Fava, Joseph L.; Rosen, Rochelle K.; Vargas, Sara; Barroso, Candelaria; Christensen, Anna L.; Woodsong, Cynthia; Severy, Lawrence

2008-01-01

Background Along with efficacy, a microbicide’s acceptability will be integral to its impact on the pandemic. Understanding Product Characteristics that users find most acceptable and determining who will use which type of product are key to optimizing use effectiveness. Objectives To evaluate psychometrically the Important Microbicide Characteristics (IMC) instrument and examine its relationship to willingness to use microbicides. Results Exploratory and confirmatory factor analyses revealed 2 IMC subscales (Cronbach’s coefficient α: Product Characteristics subscale (α = 0.84) and Protective Properties subscale (α = 0.89)). Significant differences on Product Characteristics subscale scores were found for history of douching (P = 0.002) and employment status (P = 0.001). Whether a woman used a method to prevent pregnancy or sexually transmitted disease (STD) in the last 3 months (P IMC instrument serves as a template for future studies of candidate microbicides. PMID:17325607

Hotspots of missense mutation identify novel neurodevelopmental disorder genes and functional domains

Science.gov (United States)

Geisheker, Madeleine R.; Heymann, Gabriel; Wang, Tianyun; Coe, Bradley P.; Turner, Tychele N.; Stessman, Holly A.F.; Hoekzema, Kendra; Kvarnung, Malin; Shaw, Marie; Friend, Kathryn; Liebelt, Jan; Barnett, Christopher; Thompson, Elizabeth M.; Haan, Eric; Guo, Hui; Anderlid, Britt-Marie; Nordgren, Ann; Lindstrand, Anna; Vandeweyer, Geert; Alberti, Antonino; Avola, Emanuela; Vinci, Mirella; Giusto, Stefania; Pramparo, Tiziano; Pierce, Karen; Nalabolu, Srinivasa; Michaelson, Jacob J.; Sedlacek, Zdenek; Santen, Gijs W.E.; Peeters, Hilde; Hakonarson, Hakon; Courchesne, Eric; Romano, Corrado; Kooy, R. Frank; Bernier, Raphael A.; Nordenskjöld, Magnus; Gecz, Jozef; Xia, Kun; Zweifel, Larry S.; Eichler, Evan E.

2017-01-01

Although de novo missense mutations have been predicted to account for more cases of autism than gene-truncating mutations, most research has focused on the latter. We identified the properties of de novo missense mutations in patients with neurodevelopmental disorders (NDDs) and highlight 35 genes with excess missense mutations. Additionally, 40 amino acid sites were recurrently mutated in 36 genes, and targeted sequencing of 20 sites in 17,689 NDD patients identified 21 new patients with identical missense mutations. One recurrent site (p.Ala636Thr) occurs in a glutamate receptor subunit, GRIA1. This same amino acid substitution in the homologous but distinct mouse glutamate receptor subunit Grid2 is associated with Lurcher ataxia. Phenotypic follow-up in five individuals with GRIA1 mutations shows evidence of specific learning disabilities and autism. Overall, we find significant clustering of de novo mutations in 200 genes, highlighting specific functional domains and synaptic candidate genes important in NDD pathology. PMID:28628100

Robust Subjective Visual Property Prediction from Crowdsourced Pairwise Labels.

Science.gov (United States)

Fu, Yanwei; Hospedales, Timothy M; Xiang, Tao; Xiong, Jiechao; Gong, Shaogang; Wang, Yizhou; Yao, Yuan

2016-03-01

The problem of estimating subjective visual properties from image and video has attracted increasing interest. A subjective visual property is useful either on its own (e.g. image and video interestingness) or as an intermediate representation for visual recognition (e.g. a relative attribute). Due to its ambiguous nature, annotating the value of a subjective visual property for learning a prediction model is challenging. To make the annotation more reliable, recent studies employ crowdsourcing tools to collect pairwise comparison labels. However, using crowdsourced data also introduces outliers. Existing methods rely on majority voting to prune the annotation outliers/errors. They thus require a large amount of pairwise labels to be collected. More importantly as a local outlier detection method, majority voting is ineffective in identifying outliers that can cause global ranking inconsistencies. In this paper, we propose a more principled way to identify annotation outliers by formulating the subjective visual property prediction task as a unified robust learning to rank problem, tackling both the outlier detection and learning to rank jointly. This differs from existing methods in that (1) the proposed method integrates local pairwise comparison labels together to minimise a cost that corresponds to global inconsistency of ranking order, and (2) the outlier detection and learning to rank problems are solved jointly. This not only leads to better detection of annotation outliers but also enables learning with extremely sparse annotations.

An Overview of Important Ethnomedicinal Herbs of Phyllanthus Species: Present Status and Future Prospects

Directory of Open Access Journals (Sweden)

Bharti Sarin

2014-01-01

Full Text Available The genus Phyllanthus consists of more than 1000 species, of which many are used as traditional medicines. The plant extracts have been used since ancient times, for treating hypertension, diabetes, hepatic, urinary, and sexual disorders, and other common ailments. Modern day scientific investigations have now confirmed pharmacognostic properties of Phyllanthus herbs. The phytochemicals attributing these medicinal properties have been identified in many of the Phyllanthus herbs. The morphologically similar herbs of Phyllanthus grow together and admixture of species during collection for manufacture of herbal medicines is quite common. Hence, along with pharmacognostic and phytochemical studies, appropriate protocols for correct identification of species are also important. As the use of these herbs as green medicines is becoming more popular, it is imperative to assess its genetic diversity and phylogenetic relatedness for future conservation strategies. This review is an attempt to present an overview of the existing studies on pharmacognostics, phytochemistry, species identification, and genetic diversity of Phyllanthus herbs and consequently (i highlight areas where further research is needed and (ii draw attention towards extending similar studies in underutilized but potentially important herbs such as P. maderaspatensis, P. kozhikodianus, P. rheedii, P. scabrifolius, and P. rotundifolius.

Structural identifiability of polynomial and rational systems

NARCIS (Netherlands)

J. Nemcová (Jana)

2010-01-01

htmlabstractSince analysis and simulation of biological phenomena require the availability of their fully specified models, one needs to be able to estimate unknown parameter values of the models. In this paper we deal with identifiability of parametrizations which is the property of one-to-one

Inhibition of Orobanche crenata seed germination and radicle growth by allelochemicals identified in cereals.

Science.gov (United States)

Fernández-Aparicio, Mónica; Cimmino, Alessio; Evidente, Antonio; Rubiales, Diego

2013-10-16

Orobanche crenata is a parasitic weed that causes severe yield losses in important grain and forage legume crops. Cereals have been reported to inhibit O. crenata parasitism when grown intercropped with susceptible legumes, but the responsible metabolites have not been identified. A number of metabolites have been reported in cereals that have allelopathic properties against weeds, pests, and pathogens. We tested the effect of several allelochemicals identified in cereals on O. crenata seed germination and radicle development. We found that 2-benzoxazolinone, its derivative 6-chloroacetyl-2-benzoxazolinone, and scopoletin significantly inhibited O. crenata seed germination. Benzoxazolinones, l-tryptophan, and coumalic acid caused the stronger inhibition of radicle growth. Also, other metabolites reduced radicle length, this inhibition being dose-dependent. Only scopoletin caused cell necrotic-like darkening in the young radicles. Prospects for their application to parasitic weed management are discussed.

Chemical hydrogen storage material property guidelines for automotive applications

Science.gov (United States)

Semelsberger, Troy A.; Brooks, Kriston P.

2015-04-01

Chemical hydrogen storage is the sought after hydrogen storage media for automotive applications because of the expected low pressure operation (0.05 kg H2/kgsystem), and system volumetric capacities (>0.05 kg H2/Lsystem). Currently, the primary shortcomings of chemical hydrogen storage are regeneration efficiency, fuel cost and fuel phase (i.e., solid or slurry phase). Understanding the required material properties to meet the DOE Technical Targets for Onboard Hydrogen Storage Systems is a critical knowledge gap in the hydrogen storage research community. This study presents a set of fluid-phase chemical hydrogen storage material property guidelines for automotive applications meeting the 2017 DOE technical targets. Viable material properties were determined using a boiler-plate automotive system design. The fluid-phase chemical hydrogen storage media considered in this study were neat liquids, solutions, and non-settling homogeneous slurries. Material properties examined include kinetics, heats of reaction, fuel-cell impurities, gravimetric and volumetric hydrogen storage capacities, and regeneration efficiency. The material properties, although not exhaustive, are an essential first step in identifying viable chemical hydrogen storage material properties-and most important, their implications on system mass, system volume and system performance.

Physician Rating Websites: What Aspects Are Important to Identify a Good Doctor, and Are Patients Capable of Assessing Them? A Mixed-Methods Approach Including Physicians' and Health Care Consumers' Perspectives.

Science.gov (United States)

Rothenfluh, Fabia; Schulz, Peter J

2017-05-01

Physician rating websites (PRWs) offer health care consumers the opportunity to evaluate their doctor anonymously. However, physicians' professional training and experience create a vast knowledge gap in medical matters between physicians and patients. This raises ethical concerns about the relevance and significance of health care consumers' evaluation of physicians' performance. To identify the aspects physician rating websites should offer for evaluation, this study investigated the aspects of physicians and their practice relevant for identifying a good doctor, and whether health care consumers are capable of evaluating these aspects. In a first step, a Delphi study with physicians from 4 specializations was conducted, testing various indicators to identify a good physician. These indicators were theoretically derived from Donabedian, who classifies quality in health care into pillars of structure, process, and outcome. In a second step, a cross-sectional survey with health care consumers in Switzerland (N=211) was launched based on the indicators developed in the Delphi study. Participants were asked to rate the importance of these indicators to identify a good physician and whether they would feel capable to evaluate those aspects after the first visit to a physician. All indicators were ordered into a 4×4 grid based on evaluation and importance, as judged by the physicians and health care consumers. Agreement between the physicians and health care consumers was calculated applying Holsti's method. In the majority of aspects, physicians and health care consumers agreed on what facets of care were important and not important to identify a good physician and whether patients were able to evaluate them, yielding a level of agreement of 74.3%. The two parties agreed that the infrastructure, staff, organization, and interpersonal skills are both important for a good physician and can be evaluated by health care consumers. Technical skills of a doctor and outcomes

The importance of fire simulation in fire prediction

Directory of Open Access Journals (Sweden)

Jevtić Radoje B.

2014-01-01

Full Text Available The appearance of fire in objects with lot of humans inside represents very possible real situation that could be very danger and could cause destructive consequences on human lives and material properties. Very important influence in fire prediction, fire protection, human and material properties safety could be a fire simulation in object. This simulation could give many useful information of possible fire propagation; possible and existed evacuation routes; possible and exited placing of fire, smoke, temperature conditions in object and many other information of crucial importance for human lives and material properties, such as the best places for sensors position, optimal number of sensors, projection of possible evacuation routes etc. There are many different programs for fire simulation. This paper presents complete fire simulation in Electrotechnical school Nikola Tesla in Niš in FDS.

The importance of the protection of industrial property, how and to defend it; La importancia de la tutela de la propiedad industrial como y por que defenderla

Energy Technology Data Exchange (ETDEWEB)

Ferrandis, S.; Miazzetto, F.; Gracia, J. L.; Rodriguez, F.; Ortiz, A.; Bosh, A.

2011-07-01

The global economy has strengthened the importance that Intellectual Property rights have in our society, converting the investments done in intangible assets and their following enforcement in key factors of the entrepreneurial success and of the economy as a whole. The article offers a comprehensive vision of the reasons pushing the entrepreneurs to enforce their intellectual property and, at the same time, it tries to describe the means and corresponding proceedings that the Spanish system offers them with this aim. (Author)

X-Ray structure and biophysical properties of rabbit fibroblast growth factor 1

Energy Technology Data Exchange (ETDEWEB)

Lee, Jihun; Blaber, Sachiko I.; Irsigler, Andre; Aspinwall, Eric; Blaber, Michael; (FSU)

2010-01-14

The rabbit is an important and de facto animal model in the study of ischemic disease and angiogenic therapy. Additionally, fibroblast growth factor 1 (FGF-1) is emerging as one of the most important growth factors for novel pro-angiogenic and pro-arteriogenic therapy. However, despite its significance, the fundamental biophysical properties of rabbit FGF-1, including its X-ray structure, have never been reported. Here, the cloning, crystallization, X-ray structure and determination of the biophysical properties of rabbit FGF-1 are described. The X-ray structure shows that the amino-acid differences between human and rabbit FGF-1 are solvent-exposed and therefore potentially immunogenic, while the biophysical studies identify differences in thermostability and receptor-binding affinity that distinguish rabbit FGF-1 from human FGF-1.

Identifying an outcome measure to assess the impact of Mobility Dogs.

Science.gov (United States)

Mudge, Suzie; Rewi, Dallas; Channon, Alexis

2017-01-01

Mobility Dogs® trains dogs to work with people with physical disabilities to increase independence, confidence, self-esteem and participation. Mobility Dogs® seeks to critically evaluate and improve its services as it grows. This study aimed to identify and implement a standardised outcome measure into practice at Mobility Dogs®. Based on the Consolidated Framework for Implementation Research and guided by a steering group of key stakeholders, a three-phase approach was developed to identify and assess an outcome measure. The steering group highlighted the organisation's specific needs, selected participation as the assessment domain and identified core utility requirements of the measure. A comprehensive review of evidence was undertaken to identify and rank potential measures according to the specified needs. Of the seven participation outcome measures that met inclusion criteria, the three highest ranked measures were critically evaluated by the steering group to determine suitability against the organisation's needs. The Impact on Participation and Autonomy (IPA) was selected for implementation into practice at Mobility Dogs®. Use of the IPA is an important first step for Mobility Dogs® to test the benefits of trained service dogs. This process could be replicated by other service dog organisations to identify outcome measures to assess their own services. Implications for Rehabilitation Service dogs (such as Mobility Dogs® in New Zealand) assist people living with physical impairments by performing tasks, however there is limited evidence on outcomes. The process for selecting an appropriate outcome measure for Mobility Dogs® involving partnership between Mobility Dogs® personnel and academics was an effective way to steer the project by determining important properties of the measure, before a search of the literature was undertaken. While the IPA was selected as the most appropriate outcome measure for use at Mobility Dogs®, it was the process that

Towards novel efficient and stable nuclear import signals: synthesis and properties of trimethylguanosine cap analogs modified within the 5',5'-triphosphate bridge.

Science.gov (United States)

Zytek, Malgorzata; Kowalska, Joanna; Lukaszewicz, Maciej; Wojtczak, Blazej A; Zuberek, Joanna; Ferenc-Mrozek, Aleksandra; Darzynkiewicz, Edward; Niedzwiecka, Anna; Jemielity, Jacek

2014-12-07

A trimethylguanosine (TMG) cap is present at the 5' end of several small nuclear and nucleolar RNAs. Recently, it has been reported that the TMG cap is a potential nuclear import signal for nucleus-targeting therapeutic nucleic acids and proteins. The import is mediated by recognition of the TMG cap by the snRNA transporting protein, snurportin1. This work describes the synthesis and properties of a series of dinucleotide TMG cap (m3(2,2,7)GpppG) analogs modified in the 5',5'-triphosphate bridge as tools to study TMG cap-dependent biological processes. The bridge was altered at different positions by introducing either bridging (imidodiphosphate, O to NH and methylenebisphosphonate, O to CH2) or non-bridging (phosphorothioate, O to S and boranophosphate, O to BH3) modifications, or by elongation to tetraphosphate. The stability of novel analogs in blood serum was studied to reveal that the α,β-bridging O to NH substitution (m3(2,2,7)GppNHpG) confers the highest resistance. Short RNAs capped with analogs containing α,β-bridging (m3(2,2,7)GppNHpG) or β-non-bridging (m3(2,2,7)GppSpG D2) modifications were resistant to decapping pyrophosphatase, hNudt16. Preliminary studies on binding by human snurportin1 revealed that both O to NH and O to S substitutions support this binding. Due to favorable properties in all three assays, m3(2,2,7)GppNHpG was selected as a promising candidate for further studies on the efficiency of the TMG cap as a nuclear import signal.

Panel 2 - properties of diamond and diamond-like-carbon films

Energy Technology Data Exchange (ETDEWEB)

Blau, P.J.; Clausing, R.E. [Oak Ridge National Lab., TN (United States); Ajayi, O.O.; Liu, Y.Y.; Purohit, A. [Argonne National Lab., IL (United States); Bartelt, P.F. [Deere & Co., Moline, IL (United States); Baughman, R.H. [Allied Signal, Morristown, NJ (United States); Bhushan, B. [Ohio State Univ., Columbus (United States); Cooper, C.V. [United Technologies Research Center, East Hartford, CT (United States); Dugger, M.T. [Sandia National Laboratories, Albuquerque, NM (United States); Freedman, A. [Aerodyne Research, Inc., Billerica, MA (United States); Larsen-Basse, J. [National Science Foundation, Washington, DC (United States); McGuire, N.R. [Caterpillar, Peoria, IL (United States); Messier, R.F. [Pennsylvania State Univ., University Park (United States); Noble, G.L.; Ostrowki, M.H. [John Crane, Inc., Morton Grove, IL (United States); Sartwell, B.D. [Naval Research Lab., Washington, DC (United States); Wei, R. [Colorado State Univ., Fort Collins (United States)

1993-01-01

This panel attempted to identify and prioritize research and development needs in determining the physical, mechanical and chemical properties of diamond and diamond-like-carbon films (D/DLCF). Three specific goals were established. They were: (1) To identify problem areas which produce concern and require a better knowledge of D/DLCF properties. (2) To identify and prioritize key properties of D/DLCF to promote transportation applications. (3) To identify needs for improvement in properties-measurement methods. Each of these goals is addressed subsequently.

Import of metal scrap - risks associated with radioactivity

International Nuclear Information System (INIS)

Elert, M.

1992-11-01

There is a growing concern in Sweden for the possibility that imported metal scrap is radioactive. The recent political and economical changes in eastern Europe and the increased cooperation with the CEC has affected Swedens import. In the last years, the import of metal scrap from the former USSR has increased considerably. In view of recent incidents, when radioactive materials have been found, the Swedish Radiation Protection Institute has detected a need for identifying the potential risk sources and evaluating the magnitude of the risk associated with the import of metal scrap. The purpose of this report is to provide some background material concerning import statistics, use of metal scrap in Sweden and to identify potential sources of radioactive metal scrap. In addition, the radionuclides of most concern has been identified and the possibility of detecting them in metal scrap shipments is analyzed

Identifying 8-hydroxynaringenin as a suicide substrate of mushroom tyrosinase.

Science.gov (United States)

Chang, Te-Sheng; Lin, Meng-Yi; Lin, Hsuan-Jung

2010-01-01

A biotransformed metabolite of naringenin was isolated from the fermentation broth of Aspergillus oryzae, fed with naringenin, and identified as 8-hydroxynaringenin based on the mass and (1)H- and (13)C-NMR spectral data. The compound showed characteristics of both an irreversible inhibitor and a substrate of mushroom tyrosinase in preincubation and HPLC analysis. These results demonstrate that 8-hydroxynaringenin belongs to a suicide substrate of mushroom tyrosinase. The partition ratio between the compound's molecules in the formation of product and in the inactivation of the enzyme was determined to be 283 +/- 21. The present study's results, together with our previous findings, which proved that both 8-hydroxydaidzein and 8-hydroxygenistein are suicide substrates of mushroom tyrosinase, show that 7,8,4'-trihydroxyl functional groups on flavonoids' skeletons play important roles in producing suicide substrate properties toward mushroom tyrosinase.

Importance of the Recurrent Tax on Immovable Property in the Tax Systems of EU Countries

Directory of Open Access Journals (Sweden)

Břetislav Andrlík

2014-01-01

Full Text Available This paper deals with the issue of the recurrent tax on immovable property and its significance in the tax systems of the EU Member States. The recurrent tax on immovable property is classified as property taxes, also according to the international methodology of the classification of taxes. This tax is imposed on the owners (in some cases on the lessee or user of the immovable property in the various tax jurisdictions and belong to the taxes that the taxpayer cannot avoid and from this perspective it represents a stable source of income for the public budgets of the modern market economies. This paper discusses the current state of the application of this tax in the tax systems of the Member States with an emphasis on numerical characteristics on the defined timeline. In frame of the analysis of the numerical characteristics there are use the primary sources, which are followed by the interpretation of the calculated results. The theoretical introduction is defining the theoretical basis for the application of this tax in modern tax systems and its conflict with the issue of double taxation.

Characterization-Based Molecular Design of Bio-Fuel Additives Using Chemometric and Property Clustering Techniques

International Nuclear Information System (INIS)

Hada, Subin; Solvason, Charles C.; Eden, Mario R.

2014-01-01

In this work, multivariate characterization data such as infrared spectroscopy was used as a source of descriptor data involving information on molecular architecture for designing structured molecules with tailored properties. Application of multivariate statistical techniques such as principal component analysis allowed capturing important features of the molecular architecture from enormous amount of complex data to build appropriate latent variable models. Combining the property clustering techniques and group contribution methods based on characterization (cGCM) data in a reverse problem formulation enabled identifying candidate components by combining or mixing molecular fragments until the resulting properties match the targets. The developed methodology is demonstrated using molecular design of biodiesel additive, which when mixed with off-spec biodiesel produces biodiesel that meets the desired fuel specifications. The contribution of this work is that the complex structures and orientations of the molecule can be included in the design, thereby allowing enumeration of all feasible candidate molecules that matched the identified target but were not part of original training set of molecules.

Characterization-Based Molecular Design of Bio-Fuel Additives Using Chemometric and Property Clustering Techniques

Energy Technology Data Exchange (ETDEWEB)

Hada, Subin; Solvason, Charles C.; Eden, Mario R., E-mail: edenmar@auburn.edu [Department of Chemical Engineering, Auburn University, Auburn, AL (United States)

2014-06-10

In this work, multivariate characterization data such as infrared spectroscopy was used as a source of descriptor data involving information on molecular architecture for designing structured molecules with tailored properties. Application of multivariate statistical techniques such as principal component analysis allowed capturing important features of the molecular architecture from enormous amount of complex data to build appropriate latent variable models. Combining the property clustering techniques and group contribution methods based on characterization (cGCM) data in a reverse problem formulation enabled identifying candidate components by combining or mixing molecular fragments until the resulting properties match the targets. The developed methodology is demonstrated using molecular design of biodiesel additive, which when mixed with off-spec biodiesel produces biodiesel that meets the desired fuel specifications. The contribution of this work is that the complex structures and orientations of the molecule can be included in the design, thereby allowing enumeration of all feasible candidate molecules that matched the identified target but were not part of original training set of molecules.

Soil properties associated with net nitrification following watershed conversion with Appalachian hardwoods to Norway spruce

Science.gov (United States)

Charlene N. Kelly; Stephen H. Schoenholtz; Mary Beth Adams

2011-01-01

Nitrate (NO3-N) in soil solution and streamwater can be an important vector of nitrogen (N) loss from forested watersheds, and nitrification is associated with negative consequences of soil acidification and eutrophication of aquatic ecosystems. The purpose of this study was to identify vegetation-mediated soil properties that may control...

A parametric study of influence of material properties on car cabin environment

Directory of Open Access Journals (Sweden)

Pokorny Jan

2014-03-01

Full Text Available Recently the author presented the paper describing a car cabin heat load model for the prediction of the car cabin environment. The model allowed to simulate a transient behavior of the car cabin, i.e. radiant temperature of surfaces, air temperature and relative humidity. The model was developed in Dymola and was built on the basic principles of thermodynamics and heat balance equations. The model was validated by experiments performed on the Škoda Felicia during various operational conditions. In this paper the authors present a parametric study investigating influence of material properties on a car cabin environment. The Matlab version of the car cabin heat load model has been developed and used. The model was extended by simple graphical user interface and it was deployed into the stand alone executable application. The aim of this parametric study is to identify most important material properties and its effect on the cabin environment during specific operational conditions of car. By means of a sensitive analysis it can identified which material parameters have to be defined precisely and which parameters are not so important for the prediction of the air temperature inside cabin.

Gene Expression Profiling Identifies Important Genes Affected by R2 Compound Disrupting FAK and P53 Complex

International Nuclear Information System (INIS)

Golubovskaya, Vita M.; Ho, Baotran; Conroy, Jeffrey; Liu, Song; Wang, Dan; Cance, William G.

2014-01-01

Focal Adhesion Kinase (FAK) is a non-receptor kinase that plays an important role in many cellular processes: adhesion, proliferation, invasion, angiogenesis, metastasis and survival. Recently, we have shown that Roslin 2 or R2 (1-benzyl-15,3,5,7-tetraazatricyclo[3.3.1.1~3,7~]decane) compound disrupts FAK and p53 proteins, activates p53 transcriptional activity, and blocks tumor growth. In this report we performed a microarray gene expression analysis of R2-treated HCT116 p53 +/+ and p53 −/− cells and detected 1484 genes that were significantly up- or down-regulated (p < 0.05) in HCT116 p53 +/+ cells but not in p53 −/− cells. Among up-regulated genes in HCT p53 +/+ cells we detected critical p53 targets: Mdm-2, Noxa-1, and RIP1. Among down-regulated genes, Met, PLK2, KIF14, BIRC2 and other genes were identified. In addition, a combination of R2 compound with M13 compound that disrupts FAK and Mmd-2 complex or R2 and Nutlin-1 that disrupts Mdm-2 and p53 decreased clonogenicity of HCT116 p53 +/+ colon cancer cells more significantly than each agent alone in a p53-dependent manner. Thus, the report detects gene expression profile in response to R2 treatment and demonstrates that the combination of drugs targeting FAK, Mdm-2, and p53 can be a novel therapy approach

Effect of metallurgical factors on the bulk magnetic properties of non-oriented electrical steels

Energy Technology Data Exchange (ETDEWEB)

Ghosh, Pampa, E-mail: pampaghosh@gmail.com [Department of Mining and Materials Engineering, McGill University, 3610 University Street, Montreal, Que., Canada H3A 0C5 (Canada); Chromik, Richard R., E-mail: richard.chromik@mcgill.ca [Department of Mining and Materials Engineering, McGill University, 3610 University Street, Montreal, Que., Canada H3A 0C5 (Canada); Knight, Andrew M. [Department of Electrical and Computer Engineering, University of Alberta, Edmonton, Alta., Canada T6G 2V4 (Canada); Wakade, Shekhar G. [GM Powertrain, General Motors Company, 823 Joslyn Avenue, Building B, 4AJ35, Pontiac, MI 48340-2920 (United States)

2014-04-01

Non-oriented electrical steel (NOES) is one of the most common material used in electrical motors. Core loss and permeability are the most important properties that the motor manufacturers look for. Both these properties are structure sensitive and depend on several metallurgical factors; such as chemistry, grain size, crystallographic texture, cleanliness and stress states in non-oriented electrical steels. It has been observed in this course of the study that the grain size and Si content of NOES are the primary controlling factors to core loss, especially at higher frequencies. On the contrary, crystallographic texture plays an important role at lower frequencies. At higher frequency, core loss increases with increasing grain size and decreasing Si content of the steels. Small difference in grain size (∼50 μm) at lower frequency range has little influence on the magnetic properties but has significant adverse effect as frequency reaches high enough. - Highlights: • Magnetic properties of a set of electrical steels were measured. • Crystallographic texture, chemistry and grain size were studied for their effects on core loss and permeability. • Structure–magnetic property relationships were identified for the electrical steels.

Identifying Bitcoin users by transaction behavior

Science.gov (United States)

Monaco, John V.

2015-05-01

Digital currencies, such as Bitcoin, offer convenience and security to criminals operating in the black marketplace. Some Bitcoin marketplaces, such as Silk Road, even claim anonymity. This claim contradicts the findings in this work, where long term transactional behavior is used to identify and verify account holders. Transaction timestamps and network properties observed over time contribute to this finding. The timestamp of each transaction is the result of many factors: the desire purchase an item, daily schedule and activities, as well as hardware and network latency. Dynamic network properties of the transaction, such as coin flow and the number of edge outputs and inputs, contribute further to reveal account identity. In this paper, we propose a novel methodology for identifying and verifying Bitcoin users based on the observation of Bitcoin transactions over time. The behavior we attempt to quantify roughly occurs in the social band of Newell's time scale. A subset of the Blockchain 230686 is taken, selecting users that initiated between 100 and 1000 unique transactions per month for at least 6 different months. This dataset shows evidence of being nonrandom and nonlinear, thus a dynamical systems approach is taken. Classification and authentication accuracies are obtained under various representations of the monthly Bitcoin samples: outgoing transactions, as well as both outgoing and incoming transactions are considered, along with the timing and dynamic network properties of transaction sequences. The most appropriate representations of monthly Bitcoin samples are proposed. Results show an inherent lack of anonymity by exploiting patterns in long-term transactional behavior.

36 CFR 1212.230 - How and when must I identify workplaces?

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false How and when must I identify workplaces? 1212.230 Section 1212.230 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS... employees in each local unemployment office, performers in concert halls or radio studios). (c) If you...

Evaluation of bentonite alteration due to interactions with iron. Sensitivity analyses to identify the important factors for the bentonite alteration

International Nuclear Information System (INIS)

Sasamoto, Hiroshi; Wilson, James; Sato, Tsutomu

2013-01-01

Performance assessment of geological disposal systems for high-level radioactive waste requires a consideration of long-term systems behaviour. It is possible that the alteration of swelling clay present in bentonite buffers might have an impact on buffer functions. In the present study, iron (as a candidate overpack material)-bentonite (I-B) interactions were evaluated as the main buffer alteration scenario. Existing knowledge on alteration of bentonite during I-B interactions was first reviewed, then the evaluation methodology was developed considering modeling techniques previously used overseas. A conceptual model for smectite alteration during I-B interactions was produced. The following reactions and processes were selected: 1) release of Fe 2+ due to overpack corrosion; 2) diffusion of Fe 2+ in compacted bentonite; 3) sorption of Fe 2+ on smectite edge and ion exchange in interlayers; 4) dissolution of primary phases and formation of alteration products. Sensitivity analyses were performed to identify the most important factors for the alteration of bentonite by I-B interactions. (author)

75 FR 61246 - Additional Identifying Information Associated With Persons Whose Property and Interests in...

Science.gov (United States)

2010-10-04

... situation in North Korea. Section 1 of the Order blocks, with certain exceptions, all property and interests...), Sosong Street, Kyongrim-Dong, Pyongyang, Korea, North; Changgwang Street, Pyongyang, Korea, North [DPRK...

Composition-Based Prediction of Temperature-Dependent Thermophysical Food Properties: Reevaluating Component Groups and Prediction Models.

Science.gov (United States)

Phinney, David Martin; Frelka, John C; Heldman, Dennis Ray

2017-01-01

Prediction of temperature-dependent thermophysical properties (thermal conductivity, density, specific heat, and thermal diffusivity) is an important component of process design for food manufacturing. Current models for prediction of thermophysical properties of foods are based on the composition, specifically, fat, carbohydrate, protein, fiber, water, and ash contents, all of which change with temperature. The objectives of this investigation were to reevaluate and improve the prediction expressions for thermophysical properties. Previously published data were analyzed over the temperature range from 10 to 150 °C. These data were analyzed to create a series of relationships between the thermophysical properties and temperature for each food component, as well as to identify the dependence of the thermophysical properties on more specific structural properties of the fats, carbohydrates, and proteins. Results from this investigation revealed that the relationships between the thermophysical properties of the major constituents of foods and temperature can be statistically described by linear expressions, in contrast to the current polynomial models. Links between variability in thermophysical properties and structural properties were observed. Relationships for several thermophysical properties based on more specific constituents have been identified. Distinctions between simple sugars (fructose, glucose, and lactose) and complex carbohydrates (starch, pectin, and cellulose) have been proposed. The relationships between the thermophysical properties and proteins revealed a potential correlation with the molecular weight of the protein. The significance of relating variability in constituent thermophysical properties with structural properties--such as molecular mass--could significantly improve composition-based prediction models and, consequently, the effectiveness of process design. © 2016 Institute of Food Technologists®.

Study of material properties important for an optical property modulation-based radiation detection method for positron emission tomography

OpenAIRE

Tao, Li; Daghighian, Henry M.; Levin, Craig S.

2017-01-01

We compare the performance of two detector materials, cadmium telluride (CdTe) and bismuth silicon oxide (BSO), for optical property modulation-based radiation detection method for positron emission tomography (PET), which is a potential new direction to dramatically improve the annihilation photon pair coincidence time resolution. We have shown that the induced current flow in the detector crystal resulting from ionizing radiation determines the strength of optical modulation signal. A large...

Instruments assessing attitudes toward or capability regarding self-management of osteoarthritis: a systematic review of measurement properties.

Science.gov (United States)

Eyles, J P; Hunter, D J; Meneses, S R F; Collins, N J; Dobson, F; Lucas, B R; Mills, K

2017-08-01

To make a recommendation on the "best" instrument to assess attitudes toward and/or capabilities regarding self-management of osteoarthritis (OA) based on available measurement property evidence. Electronic searches were performed in MEDLINE, EMBASE, CINAHL and PsychINFO (inception to 27 December 2016). Two reviewers independently rated measurement properties using the Consensus-based Standards for the selection of Health Measurement Instruments (COSMIN) 4-point scale. Best evidence synthesis was determined by considering COSMIN ratings for measurement property results and the level of evidence available for each measurement property of each instrument. Eight studies out of 5653 publications met the inclusion criteria, with eight instruments identified for evaluation: Multidimensional Health Locus of Control (MHLC), Perceived Behavioural Control (PBC), Patient Activation Measure (PAM), Educational Needs Assessment (ENAT), Stages of Change Questionnaire in Osteoarthritis (SCQOA), Effective Consumer Scale (EC-17) and Perceived Efficacy in Patient-Physician Interactions five item (PEPPI-5) and ten item scales. Measurement properties assessed for these instruments included internal consistency (k = 8), structural validity (k = 8), test-retest reliability (k = 2), measurement error (k = 1), hypothesis testing (k = 3) and cross-cultural validity (k = 3). No information was available for content validity, responsiveness or minimal important change (MIC)/minimal important difference (MID). The Dutch PEPPI-5 demonstrated the best measurement property evidence; strong evidence for internal consistency and structural validity but limited evidence for reliability and construct validity. Although PEPPI-5 was identified as having the best measurement properties, overall there is a poor level of evidence currently available concerning measurement properties of instruments to assess attitudes toward and/or capabilities regarding osteoarthritis self-management. Further

Identification of fluorescent compounds with non-specific binding property via high throughput live cell microscopy.

Directory of Open Access Journals (Sweden)

Sangeeta Nath

Full Text Available INTRODUCTION: Compounds exhibiting low non-specific intracellular binding or non-stickiness are concomitant with rapid clearing and in high demand for live-cell imaging assays because they allow for intracellular receptor localization with a high signal/noise ratio. The non-stickiness property is particularly important for imaging intracellular receptors due to the equilibria involved. METHOD: Three mammalian cell lines with diverse genetic backgrounds were used to screen a combinatorial fluorescence library via high throughput live cell microscopy for potential ligands with high in- and out-flux properties. The binding properties of ligands identified from the first screen were subsequently validated on plant root hair. A correlative analysis was then performed between each ligand and its corresponding physiochemical and structural properties. RESULTS: The non-stickiness property of each ligand was quantified as a function of the temporal uptake and retention on a cell-by-cell basis. Our data shows that (i mammalian systems can serve as a pre-screening tool for complex plant species that are not amenable to high-throughput imaging; (ii retention and spatial localization of chemical compounds vary within and between each cell line; and (iii the structural similarities of compounds can infer their non-specific binding properties. CONCLUSION: We have validated a protocol for identifying chemical compounds with non-specific binding properties that is testable across diverse species. Further analysis reveals an overlap between the non-stickiness property and the structural similarity of compounds. The net result is a more robust screening assay for identifying desirable ligands that can be used to monitor intracellular localization. Several new applications of the screening protocol and results are also presented.

The trespasses of property law.

Science.gov (United States)

Wall, Jesse

2014-01-01

The purpose of this article is to identify a limit to the appropriate application of property law to the use and storage of bodily material. I argue here that property law ought to be limited to protecting 'contingent rights' and that recent cases where property rights have been recognised in semen represent the application of property law beyond this limit. I also suggest how the law ought to develop in order to avoid the overextensive use of property law.

Identifying future directions for subsurface hydrocarbon migration research

Science.gov (United States)

Leifer, I.; Clark, J. F.; Luyendyk, B.; Valentine, D.

Subsurface hydrocarbon migration is important for understanding the input and impacts of natural hydrocarbon seepage on the environment. Great uncertainties remain in most aspects of hydrocarbon migration, including some basic mechanisms of this four-phase flow of tar, oil, water, and gas through the complex fracture-network geometry particularly since the phases span a wide range of properties. Academic, government, and industry representatives recently attended a workshop to identify the areas of greatest need for future research in shallow hydrocarbon migration.Novel approaches such as studying temporal and spatial seepage variations and analogous geofluid systems (e.g., geysers and trickle beds) allow deductions of subsurface processes and structures that remain largely unclear. Unique complexities exist in hydrocarbon migration due to its multiphase flow and complex geometry, including in-situ biological weathering. Furthermore, many aspects of the role of hydrocarbons (positive and negative) in the environment are poorly understood, including how they enter the food chain (respiration, consumption, etc.) and “percolate” to higher trophic levels. But understanding these ecological impacts requires knowledge of the emissions' temporal and spatial variability and trajectories.

Linking the salt transcriptome with physiological responses of a salt-resistant Populus species as a strategy to identify genes important for stress acclimation.

Science.gov (United States)

Brinker, Monika; Brosché, Mikael; Vinocur, Basia; Abo-Ogiala, Atef; Fayyaz, Payam; Janz, Dennis; Ottow, Eric A; Cullmann, Andreas D; Saborowski, Joachim; Kangasjärvi, Jaakko; Altman, Arie; Polle, Andrea

2010-12-01

To investigate early salt acclimation mechanisms in a salt-tolerant poplar species (Populus euphratica), the kinetics of molecular, metabolic, and physiological changes during a 24-h salt exposure were measured. Three distinct phases of salt stress were identified by analyses of the osmotic pressure and the shoot water potential: dehydration, salt accumulation, and osmotic restoration associated with ionic stress. The duration and intensity of these phases differed between leaves and roots. Transcriptome analysis using P. euphratica-specific microarrays revealed clusters of coexpressed genes in these phases, with only 3% overlapping salt-responsive genes in leaves and roots. Acclimation of cellular metabolism to high salt concentrations involved remodeling of amino acid and protein biosynthesis and increased expression of molecular chaperones (dehydrins, osmotin). Leaves suffered initially from dehydration, which resulted in changes in transcript levels of mitochondrial and photosynthetic genes, indicating adjustment of energy metabolism. Initially, decreases in stress-related genes were found, whereas increases occurred only when leaves had restored the osmotic balance by salt accumulation. Comparative in silico analysis of the poplar stress regulon with Arabidopsis (Arabidopsis thaliana) orthologs was used as a strategy to reduce the number of candidate genes for functional analysis. Analysis of Arabidopsis knockout lines identified a lipocalin-like gene (AtTIL) and a gene encoding a protein with previously unknown functions (AtSIS) to play roles in salt tolerance. In conclusion, by dissecting the stress transcriptome of tolerant species, novel genes important for salt endurance can be identified.

Characterization-Based Molecular Design of Biofuel Additives Using Chemometric and Property Clustering Techniques

Directory of Open Access Journals (Sweden)

Subin eHada

2014-06-01

Full Text Available In this work, multivariate characterization data such as infrared (IR spectroscopy was used as a source of descriptor data involving information on molecular architecture for designing structured molecules with tailored properties. Application of multivariate statistical techniques such as principal component analysis (PCA allowed capturing important features of the molecular architecture from complex data to build appropriate latent variable models. Combining the property clustering techniques and group contribution methods (GCM based on characterization data in a reverse problem formulation enabled identifying candidate components by combining or mixing molecular fragments until the resulting properties match the targets. The developed methodology is demonstrated using molecular design of biodiesel additive which when mixed with off-spec biodiesel produces biodiesel that meets the desired fuel specifications. The contribution of this work is that the complex structures and orientations of the molecule can be included in the design, thereby allowing enumeration of all feasible candidate molecules that matched the identified target but were not part of original training set of molecules.

User-identified gel characteristics: a qualitative exploration of perceived product efficacy of topical vaginal microbicides.

Science.gov (United States)

Morrow, Kathleen M; Underhill, Kristen; van den Berg, Jacob J; Vargas, Sara; Rosen, Rochelle K; Katz, David F

2014-10-01

Research has demonstrated that certain vaginal gel products--microbicides containing antiretroviral drugs--may reduce HIV infection risk among women. But for vaginal gels to avert HIV and other sexually transmitted infections (STIs), at-risk women must be willing to use them as directed. These products must therefore be "acceptable" to women and an important component of acceptability is users' perception that the product will work to prevent infection. We sought to understand how women's perceptions of vaginal gel properties may shape their understanding of product efficacy for HIV and STI prevention. Sixteen women completed two in-depth qualitative interviews (k = 32) to identify the range and types of sensory perceptions they experienced when using two vaginal gels. We identified emergent themes and linkages between users' sensory perceptions and their beliefs about product efficacy. Users' predictions about product efficacy for preventing infection corresponded to measurable physical properties, including gel volume, location in the vagina, coating behavior, sensation of the gel in the vagina, leakage, and gel changes during coital acts. Although the women described similar sensory experiences (e.g., gel leaked from the vagina), they interpreted these experiences to have varying implications for product efficacy (e.g., leakage was predicted to increase or decrease efficacy). To improve microbicide acceptability, gel developers should investigate and deliberately incorporate properties that influence users' perceptions of efficacy. When a microbicide is approved for use, providers should educate users to anticipate and understand their sensory experiences; improving users' experience can maximize adherence and product effectiveness.

Content Validity and Psychometric Properties of the Nomination Scale for Identifying Football Talent (NSIFT: Application to Coaches, Parents and Players

Directory of Open Access Journals (Sweden)

Alejandro Prieto-Ayuso

2017-01-01

Full Text Available The identification of football talent is a critical issue both for clubs and the families of players. However, despite its importance in a sporting, economic and social sense, there appears to be a lack of instruments that can reliably measure talent performance. The aim of this study was to design and validate the Nomination Scale for Identifying Football Talent (NSIFT, with the aim of optimising the processes for identifying said talent. The scale was first validated through expert judgment, and then statistically, by means of an exploratory factor analysis (EFA, confirmatory factor analysis (CFA, internal reliability and convergent validity. The results reveal the presence of three factors in the scale’s factor matrix, with these results being confirmed by the CFA. The scale revealed suitable internal reliability and homogeneity indices. Convergent validity showed that it is teammates who are best able to identify football talent, followed by coaches and parents. It can be concluded that the NSIFT is suitable for use in the football world. Future studies should seek to confirm these results in different contexts by means of further CFAs.

Tool for assessment of process importance at the groundwater/surface water interface.

Science.gov (United States)

Palakodeti, Ravi C; LeBoeuf, Eugene J; Clarke, James H

2009-10-01

The groundwater/surface water interface (GWSWI) represents an important transition zone between groundwater and surface water environments that potentially changes the nature and flux of contaminants exchanged between the two systems. Identifying dominant and rate-limiting contaminant transformation processes is critically important for estimating contaminant fluxes and compositional changes across the GWSWI. A new, user-friendly, spreadsheet- and Visual Basic-based analytical screening tool that assists in evaluating the dominance of controlling kinetic processes across the GWSWI is presented. Based on contaminant properties, first-order processes that may play a significant role in solute transport/transformation are evaluated in terms of a ratio of process importance (P(i)) that relates the process rate to the rate of fluid transfer. Besides possessing several useful compilations of contaminant and process data, the screening tool also includes 1-D analytical models that assist users in evaluating contaminant transport across the GWSWI. The tool currently applies to 29 organics and 10 inorganics of interest within the context of the GWSWI. Application of the new screening tool is demonstrated through an evaluation of natural attenuation at a site with trichloroethylene and 1,1,2,2-tetrachloroethane contaminated groundwater discharging into wetlands.

GENERAL GUIDELINES CONCERNING THE RELATION INTERNATIONAL INTELLECTUAL PROPERTY BUSINESS VERSUS HUMAN RIGHTS AND CIVIL LIBERTIES

Directory of Open Access Journals (Sweden)

Speriusi-Vlad Alin

2014-07-01

Full Text Available Today, the intellectual property protection is no longer an absolute social and legal that justifies adoption of any measures necessary to protect it. Initially seen as the prerequisite for sustainable development, implementation of new technologies, and encouragement of international trade, the intellectual property, especially prior to ACTA (Anti-Counterfeiting Trade Agreement international trial implementation, and also thereafter, was increasingly identified as a source of violation of fundamental rights and civil liberties, i.e. the right to protection of personal data, the right to privacy, freedom to send and receive information freedom of information, freedom to contract, and freedom to carry out economic activities (freedom of commerce. As far as international trade transactions have often a component of intellectual property that requires to be protected, it is necessary to identify the landmarks, the rules establishing de facto limits in order to protect the intellectual property without risk of infringement of fundamental rights and civil liberties of other persons, in particular users or potential users of goods and services incorporating intellectual property. The best guidelines in this regard may be provided by the CJEU (Court of Justice of the European Union case-law both due to its reasoning underlying the decision of the Parliament to reject ACTA ratification and the fact that the case-law of this Court, especially the most recent one, is highly complex and nuanced, not denying in any way the importance of intellectual property, and identifying certain cases where their primacy persist and whose analysis leads to laying down some general rules in the field.

Identifying organisational principles and management practices important to the quality of health care services for chronic conditions.

Science.gov (United States)

Frølich, Anne

2012-02-01

effect of financial incentives and public performance reporting on the behaviour of professionals and quality of care. Using secondary data, KP and the Danish health care system were compared in terms of six central dimensions: population, health care professionals, health care organisations, utilization patterns, quality measurements, and costs. Differences existed between the two systems on all dimensions, complicating the interpretation of findings. For instance, observed differences might be due to similar tendencies in the two health care systems that were observed at different times, rather than true structural differences. The expenses in the two health care systems were corrected for differences in the populations served and the purchasing power of currencies. However, no validated methods existed to correct for observed differences in case-mixes of chronic conditions. Data from a population of about half a million patients with diabetes in a large U.S. integrated health care delivery system affiliated with 41 medical centers employing 15 different CCM management practices was the basis for identifying effective management practices. Through the use of statistical modelling, the management practice of provider alerts was identified as most effective for promoting screening for hemoglobin A1c and lipid profile. The CCM was used as a framework for implementing four rehabilitation programs. The model promoted continuity of care and quality of health care services. New management practices were developed in the study, and known practices were further developed. However, the observational nature of the study limited the generalisability of the findings. In a structured literature survey focusing on the effect of financial incentives and public performance reporting on the quality of health care services, few studies documenting an effect were identified. The results varied, and important program aspects or contextual variables were often omitted. A model describing

The right of property and its social function

Directory of Open Access Journals (Sweden)

Erida Pejo

2017-11-01

Full Text Available Rights of property are the main prerequisites for the existence of any political society, as it is an objective necessity for their normal functioning and continuity. Property and right of property are the constituent of autonomous life in the realization of the world of individual or collective goals, without the protection and guarantee of which, it is oft en stated that the respect and enjoyment of the entirety of other constitutional rights cannot be imagined. Rights of property are presented and considered as one of the most important issues of legal and political doctrines, and it represents one of the fundamental issues of national and international policy. The classic liberal property concept has dominated the modern legal and political debates and imagination. The property institution is oft en conceived as a quasi absolute subjective right, a concept that, in the modern era, competes with alternative concepts that have influenced both state policies and modern legal culture and consciousness, the consequences of which are reflected in legal systems. One of the most influential alternative concepts is the social function of property,1 of course in modern legal culture the property is understood as an individual right, limited not only by the rights of others, but also by the public interest. Thus, modern legal thinking, although it regards it as a basic element of the normal functioning of the Rule of Law, the private property institution has given a new emphasis to this right, altering the basis for the attribution of property power by the fact that, the relation of the individual to his/ her personality in a social organization, is considered as substantive to the juridical order, therefore the volume of ownership power may not be more unconditional. The social function cannot be identified with the external limitation of ownership which is reserved to collectivity, but it is presented as an elitist, unifying expression of the

Defective TiO2 with oxygen vacancies: synthesis, properties and photocatalytic applications

Science.gov (United States)

Pan, Xiaoyang; Yang, Min-Quan; Fu, Xianzhi; Zhang, Nan; Xu, Yi-Jun

2013-04-01

Titanium dioxide (TiO2), as an important semiconductor metal oxide, has been widely investigated in the field of photocatalysis. The properties of TiO2, including its light absorption, charge transport and surface adsorption, are closely related to its defect disorder, which in turn plays a significant role in the photocatalytic performance of TiO2. Among all the defects identified in TiO2, oxygen vacancy is one of the most important and is supposed to be the prevalent defect in many metal oxides, which has been widely investigated both by theoretical calculations and experimental characterizations. Here, we give a short review on the existing strategies for the synthesis of defective TiO2 with oxygen vacancies, and the defect related properties of TiO2 including structural, electronic, optical, dissociative adsorption and reductive properties, which are intimately related to the photocatalytic performance of TiO2. In particular, photocatalytic applications with regard to defective TiO2 are outlined. In addition, we offer some perspectives on the challenge and new direction for future research in this field. We hope that this tutorial minireview would provide some useful contribution to the future design and fabrication of defective semiconductor-based nanomaterials for diverse photocatalytic applications.Titanium dioxide (TiO2), as an important semiconductor metal oxide, has been widely investigated in the field of photocatalysis. The properties of TiO2, including its light absorption, charge transport and surface adsorption, are closely related to its defect disorder, which in turn plays a significant role in the photocatalytic performance of TiO2. Among all the defects identified in TiO2, oxygen vacancy is one of the most important and is supposed to be the prevalent defect in many metal oxides, which has been widely investigated both by theoretical calculations and experimental characterizations. Here, we give a short review on the existing strategies for the

Metabolomics coupled with similarity analysis advances the elucidation of the cold/hot properties of traditional Chinese medicines.

Science.gov (United States)

Jia, Yan; Zhang, Zheng-Zheng; Wei, Yu-Hai; Xue-Mei, Qin; Li, Zhen-Yu

2017-08-01

It recently becomes an important and urgent mission for modern scientific research to identify and explain the theory of traditional Chinese medicine (TCM), which has been utilized in China for more than four millennia. Since few works have been contributed to understanding the TCM theory, the mechanism of actions of drugs with cold/hot properties remains unclear. In the present study, six kinds of typical herbs with cold or hot properties were orally administered into mice, and serum and liver samples were analyzed using an untargeted nuclear magnetic resonance (NMR) based metabolomics approach coupled with similarity analysis. This approach was performed to identify and quantify changes in metabolic pathways to elucidate drug actions on the treated mice. Our results showed that those drugs with same property exerted similar effects on the metabolic alterations in mouse serum and liver samples, while drugs with different property showed different effects. The effects of herbal medicines with cold/hot properties were exerted by regulating the pathways linked to glycometabolism, lipid metabolism, amino acids metabolism and other metabolic pathways. The results elucidated the differences and similarities of drugs with cold/hot properties, providing useful information on the explanation of medicinal properties of these TCMs. Copyright © 2017 China Pharmaceutical University. Published by Elsevier B.V. All rights reserved.

Identifiability of location and magnitude of flow barriers in slightly compressible flow

NARCIS (Netherlands)

Kahrobaei, S.; Mansoori Habib Abadi, M.; Joosten, G.J.P.; Hof, Van den P.M.J.; Jansen, J.D.

2015-01-01

Classic identifiability analysis of flow barriers in incompressible single-phase flow reveals that it is not possible to identify the location and permeability of low-permeability barriers from production data (wellbore pressures and rates), and that only averaged reservoir properties in between

Identifiability of location and magnitude of flow barriers in slightly compressible flow

NARCIS (Netherlands)

Kahrobaei, S.; Mansoori Habib Abadi, M.; Joosten, G.J.P.; Van den Hof, P.; Jansen, J.D.

2016-01-01

Classic identifiability analysis of flow barriers in incompressible single-phase flow reveals that it is not possible to identify the location and permeability of low-permeability barriers from production data (wellbore pressures and rates), and that only averaged reservoir properties in between

Identifying faecal impaction is important for ensuring the timely diagnosis of childhood functional constipation

DEFF Research Database (Denmark)

Modin, Line; Walsted, Anne-Mette; Jakobsen, Marianne Skytte

2015-01-01

AIM: Most research on functional constipation has been carried out at a tertiary level. We focused this study on a secondary-level hospital outpatients' department, assessing the distribution of diagnostic criteria for childhood functional constipation and evaluating the consequences of current...... diagnostic practice based on current guidelines. METHODS: We enrolled 235 children, aged two to 16 years of age, with functional constipation according to the Rome III criteria and assessed them using medical histories and physical examinations, including rectal examinations and ultrasound measurements...... the timely diagnosis of childhood functional constipation at the secondary care level. Ultrasound examination proved a reliable alternative to rectal examination or abdominal radiography when identifying faecal impaction....

41 CFR 105-74.230 - How and when must I identify workplaces?

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false How and when must I identify workplaces? 105-74.230 Section 105-74.230 Public Contracts and Property Management Federal... employees in each local unemployment office, performers in concert halls or radio studios). (c) If you...

Use of the Plant Defense Protein Osmotin To Identify Fusarium oxysporum Genes That Control Cell Wall Properties

KAUST Repository

Lee, H.

2010-02-26

Fusarium oxysporum is the causative agent of fungal wilt disease in a variety of crops. The capacity of a fungal pathogen such as F. oxysporum f. sp. nicotianae to establish infection on its tobacco (Nicotiana tabacum) host depends in part on its capacity to evade the toxicity of tobacco defense proteins, such as osmotin. Fusarium genes that control resistance to osmotin would therefore reflect coevolutionary pressures and include genes that control mutual recognition, avoidance, and detoxification. We identified FOR (Fusarium Osmotin Resistance) genes on the basis of their ability to confer osmotin resistance to an osmotin-sensitive strain of Saccharomyces cerevisiae. FOR1 encodes a putative cell wall glycoprotein. FOR2 encodes the structural gene for glutamine:fructose-6-phosphate amidotransferase, the first and rate-limiting step in the biosynthesis of hexosamine and cell wall chitin. FOR3 encodes a homolog of SSD1, which controls cell wall composition, longevity, and virulence in S. cerevisiae. A for3 null mutation increased osmotin sensitivity of conidia and hyphae of F. oxysporum f. sp. nicotianae and also reduced cell wall β-1,3-glucan content. Together our findings show that conserved fungal genes that determine cell wall properties play a crucial role in regulating fungal susceptibility to the plant defense protein osmotin.

Use of the Plant Defense Protein Osmotin To Identify Fusarium oxysporum Genes That Control Cell Wall Properties

KAUST Repository

Lee, H.; Damsz, B.; Woloshuk, C. P.; Bressan, R. A.; Narasimhan, Meena L.

2010-01-01

Fusarium oxysporum is the causative agent of fungal wilt disease in a variety of crops. The capacity of a fungal pathogen such as F. oxysporum f. sp. nicotianae to establish infection on its tobacco (Nicotiana tabacum) host depends in part on its capacity to evade the toxicity of tobacco defense proteins, such as osmotin. Fusarium genes that control resistance to osmotin would therefore reflect coevolutionary pressures and include genes that control mutual recognition, avoidance, and detoxification. We identified FOR (Fusarium Osmotin Resistance) genes on the basis of their ability to confer osmotin resistance to an osmotin-sensitive strain of Saccharomyces cerevisiae. FOR1 encodes a putative cell wall glycoprotein. FOR2 encodes the structural gene for glutamine:fructose-6-phosphate amidotransferase, the first and rate-limiting step in the biosynthesis of hexosamine and cell wall chitin. FOR3 encodes a homolog of SSD1, which controls cell wall composition, longevity, and virulence in S. cerevisiae. A for3 null mutation increased osmotin sensitivity of conidia and hyphae of F. oxysporum f. sp. nicotianae and also reduced cell wall β-1,3-glucan content. Together our findings show that conserved fungal genes that determine cell wall properties play a crucial role in regulating fungal susceptibility to the plant defense protein osmotin.

Recognizing brain motor imagery activities by identifying chaos properties of oxy-hemoglobin dynamics time series

International Nuclear Information System (INIS)

Khoa, Truong Quang Dang; Yuichi, Nakamura; Masahiro, Nakagawa

2009-01-01

In recent years, functional near-infrared spectroscopy (NIRS) has been introduced as a new neuroimaging modality with which to conduct functional brain-imaging studies. With its advanced features, NIRS signal processing has become a very attractive field in computational science. This work explores nonlinear physical aspects of cerebral hemodynamic changes over the time series of NIRS. Detecting the presence of chaos in a dynamical system is an important problem in studying the irregular or chaotic motion that is generated by nonlinear systems whose dynamical laws uniquely determine the time of evolution of a state of the system. The strategy results directly from the definition of the largest Lyapunov exponent. The Lyapunov exponents quantify the exponential divergence of initially close state-space trajectories and estimate the amount of chaos in a system. The method is an application of the Rosenstein algorithm, an efficient method for calculating the largest Lyapunov exponent from an experimental time series. In the present paper, the authors focus mainly on the detection of chaos characteristics of the time series associated to hemoglobin dynamics. Furthermore, the chaos parameters obtained can be used to identify the active state period of the human brain.

Identifying important and feasible policies and actions for health at community sports clubs: a consensus-generating approach.

Science.gov (United States)

Kelly, Bridget; King, Lesley; Bauman, Adrian E; Baur, Louise A; Macniven, Rona; Chapman, Kathy; Smith, Ben J

2014-01-01

Children's high participation in organised sport in Australia makes sport an ideal setting for health promotion. This study aimed to generate consensus on priority health promotion objectives for community sports clubs, based on informed expert judgements. Delphi survey using three structured questionnaires. Forty-six health promotion, nutrition, physical activity and sport management/delivery professionals were approached to participate in the survey. Questionnaires used an iterative process to determine aspects of sports clubs deemed necessary for developing healthy sporting environments for children. Initially, participants were provided with a list of potential standards for a range of health promotion areas and asked to rate standards based on their importance and feasibility, and any barriers to implementation. Subsequently, participants were provided with information that summarised ratings for each standard to indicate convergence of the group, and asked to review and potentially revise their responses where they diverged. In a third round, participants ranked confirmed standards by priority. 26 professionals completed round 1, 21 completed round 2, and 18 completed round 3. The highest ranked standards related to responsible alcohol practices, availability of healthy food and drinks at sports canteens, smoke-free club facilities, restricting the sale and consumption of alcohol during junior sporting activities, and restricting unhealthy food and beverage company sponsorship. Identifying and prioritising health promotion areas that are relevant to children's sports clubs assists in focusing public health efforts and may guide future engagement of sports clubs. Approaches for providing informational and financial support to clubs to operationalise these standards are proposed. Copyright © 2013 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

77 FR 39573 - Additional Identifying Information Associated With Persons Whose Property and Interests in...

Science.gov (United States)

2012-07-03

... of State, and the Secretary of Homeland Security may designate and block the property and interests... in, or providing financial or technological support for or to, or providing goods or services in..., DOB 24 Mar 1967; POB Sinaloa, Mexico; citizen Mexico; nationality Mexico; Passport TJT000291379...

77 FR 31068 - Additional Identifying Information Associated With Persons Whose Property and Interests in...

Science.gov (United States)

2012-05-24

... With Respect to Grave Human Rights Abuses by Governments of Iran and Syria via Information Technology... Human Rights Abuses by the Governments of Iran and Syria via Information Technology,'' whose property... Respect to Grave Human Rights Abuses by the Governments of Iran and Syria via Information Technology...

Towards Mining Latent Client Identifiers from Network Traffic

Directory of Open Access Journals (Sweden)

Jain Sakshi

2016-04-01

Full Text Available Websites extensively track users via identifiers that uniquely map to client machines or user accounts. Although such tracking has desirable properties like enabling personalization and website analytics, it also raises serious concerns about online user privacy, and can potentially enable illicit surveillance by adversaries who broadly monitor network traffic.

Effects of Microstructural Variability on Thermo-Mechanical Properties of a Woven Ceramic Matrix Composite

Science.gov (United States)

Goldsmith, Marlana B.; Sankar, Bhavani V.; Haftka, Raphael T.; Goldberg, Robert K.

2013-01-01

The objectives of this paper include identifying important architectural parameters that describe the SiC/SiC five-harness satin weave composite and characterizing the statistical distributions and correlations of those parameters from photomicrographs of various cross sections. In addition, realistic artificial cross sections of a 2D representative volume element (RVE) are generated reflecting the variability found in the photomicrographs, which are used to determine the effects of architectural variability on the thermo-mechanical properties. Lastly, preliminary information is obtained on the sensitivity of thermo-mechanical properties to architectural variations. Finite element analysis is used in combination with a response surface and it is shown that the present method is effective in determining the effects of architectural variability on thermo-mechanical properties.

A Preliminary Study of the Application of Electromagnetic Conductivity Meter on Soil Properties of Paddy Cultivation Areas at Wue Village, Jantho, Aceh Besar District, Indonesia

OpenAIRE

Marwan,

2015-01-01

Conventional soil sampling is time consuming and requires meticulous laboratory analysis. Hence, mapping of soil apparent in respect to electrical conductivity (ECa) has been developed to identify areas of contrasting soil properties. Such ECa values are represent measures of soil properties. The sensor system, GF Instrument model CMD-4 were used to analyze soil physical properties. This system consists of three important parts, ECa sensor, data logger and Global Positioning System (DGPS) rec...

Competence Description for Personal Recommendations: The Importance of Identifying the Complexity of Learning and Performance Situations

Science.gov (United States)

Prins, Frans J.; Nadolski, Rob J.; Berlanga, Adriana J.; Drachsler, Hendrik; Hummel, Hans G. K.; Koper, Rob

2008-01-01

For competences development of learners and professionals, target competences and corresponding competence development opportunities have to be identified. Personal Recommender Systems (PRS) provide personal recommendations for learners aimed at finding and selecting learning activities that best match their needs. This article argues that a…

Possibilities and importance of using computer games and simulations in educational process

Directory of Open Access Journals (Sweden)

Danilović Mirčeta S.

2003-01-01

Full Text Available The paper discusses if it is possible and appropriate to use simulations (simulation games and traditional games in the process of education. It is stressed that the terms "game" and "simulation" can and should be taken in a broader sense, although they are chiefly investigated herein as video-computer games and simulations. Any activity combining the properties of game (competition, rules, players and the properties of simulation (i.e. operational presentation of reality should be understood as simulation games, where role-play constitutes their essence and basis. In those games the student assumes a new identity, identifies himself with another personality and responds similarly. Game rules are basic and most important conditions for its existence, accomplishment and goal achievement. Games and simulations make possible for a student to acquire experience and practice i.e. to do exercises in nearly similar or identical life situations, to develop cognitive and psycho-motor abilities and skills, to acquire knowledge, to develop, create and change attitudes and value criteria, and to develop perception of other people’s feelings and attitudes. It is obligatory for the teacher to conduct preparations to use and apply simulation games in the process of teaching.

Effect of stacking sequence on mechanical properties neem wood veneer plastic composites

Science.gov (United States)

Nagamadhu, M.; Kumar, G. C. Mohan; Jeyaraj, P.

2018-04-01

This study investigates the effect of wood veneer stacking sequence on mechanical properties of neem wood polymer composite (WPC) experimentally. Wood laminated samples were fabricated by conventional hand layup technique in a mold and cured under pressure at room temperature and then post cured at elevated temperature. Initially, the tensile, flexural, and impact test were conducted to understand the effect of weight fraction of fiber on mechanical properties. The mechanical properties have increased with the weight fraction of fiber. Moreover the stacking sequence of neem wood plays an important role. As it has a significant impact on the mechanical properties. The results indicated that 0°/0° WPC shows highest mechanical properties as compared to other sequences (90°/90°, 0°/90°, 45°/90°, 45°/45°). The Fourier Transform Infrared Spectroscopy (FTIR) Analysis were carried out to identify chemical compounds both in raw neem wood and neem wood epoxy composite. The microstructure raw/neat neem wood and the interfacial bonding characteristics of neem wood composite investigated using Scanning electron microscopy images.

Genesis and properties of wetland soils by VIS-NIR-SWIR as a technique for environmental monitoring.

Science.gov (United States)

Demattê, José Alexandre Melo; Horák-Terra, Ingrid; Beirigo, Raphael Moreira; Terra, Fabrício da Silva; Marques, Karina Patrícia Prazeres; Fongaro, Caio Troula; Silva, Alexandre Christófaro; Vidal-Torrado, Pablo

2017-07-15

Wetlands are important ecosystems characterized by redoximorphic environments producing typical soil forming processes and organic carbon accumulation. Assessments and management of these areas are dependent on knowledge about soil characteristics and variability. By reflectance spectroscopy, information about soils can be obtained since their spectral behaviors are directly related to their chemical, physical, and mineralogical properties reflecting the pedogenetic processes and environment conditions. Our aims were: (a) to characterize the main soil classes of wetlands regarding their spectral behaviors in VIS-NIR-SWIR (350-2500 nm) and relate them to pedogenesis and environmental conditions, (b) to determine spectral ranges (bands) with greater expression of the main soil properties, (c) to identify spectral variations and similarities between hydromorphic soils from wetlands and other soils under different moisture conditions, and (d) to propose spectral models to quantify some chemical and physical soil properties used as environmental quality indicators. Nine soil profiles from the Pantanal region (Mato Grosso State, Brazil) and one from the Serra do Espinhaço Meridional (Minas Gerais State, Brazil) were investigated. Spectral morphology interpretation allowed identifying horizon differences regarding shape, absorption features and reflectance intensity. Some pedogenetic processes of wetland soils related to organic carbon accumulation and oxide iron variation were identified by spectra. Principal Component Analysis allowed discriminating soils from wetland and outside this area (oxidic environment). Quantification of organic carbon was possible with R 2 of 0.90 and low error. Quantification of clay content was masked by soils with organic carbon content over 2% where it was not possible to quantify with high R 2 and low error both properties when dataset has soil samples with high organic carbon content. By reflectance spectroscopy, important

IMMUNO-MODULATORY PROPERTIES OF PREBIOTICS EXTRACTED FROM vernonia amygdalina.

Science.gov (United States)

Im, Ezeonu; Ae, Asuquo; Bn, Ukwah; Po, Ukoha

2016-01-01

Vernonia amygdalina , commonly called bitter-leaf, is widely consumed in many parts of Africa, and Nigeria, in particular. The leaf extract has been reported to have antimicrobial, anti-plasmodial, anti-helminthic, as well as prebiotic properties, but its immuno-modulatory effects have not been well-studied, neither have the prebiotics been identified. This study evaluated the immuno-modulatory properties of the aqueous leaf extract and identified the prebiotic components. The immuno-modulatory potential was evaluated by monitoring the effects of oral administration of the extract on immunological, haematological and lipid profiles of Rattus norvegicus , while the prebiotic components were identified by thin layer chromatography (TLC), following liquid-liquid fractionation of the extract. Consumption of the extract caused significant increases in CD4+-, white blood cell-, total lymphocyte- and high density lipid (HDL) counts; decreases in low density lipid (LDL) and triglycerides and no significant effect on haemoglobin (Hb) and packed cell volume (PCV) in the blood of test animals. The water-soluble fraction of the extract contained most of the phyto-constituents of the extract and Thin Layer Chromatographic analysis of the fraction revealed the presence of fructo-oligosaccharide and galacto-oligosaccharide prebiotics. The results from this study have shown that the aqueous leaf extract of V. amygdalina has positive immune-modulatory and haematologic effects and contains some important prebiotic compounds.

The importance of fuel properties in the formation of nitrogen oxides and in combustion

International Nuclear Information System (INIS)

Huotari, J.; Aho, M.; Haemaelaeinen, J.; Huotari, J.; Saastamoinen, J.; Rantanen, J.

1995-01-01

The goal of this work is to find new information about the effects of pressure, temperature and fuel properties (Fuel-O/Fuel-N) on the formation of nitrogen oxides through the most important intermediates (NH 3 and HCN). In addition, a single particle model for the simultaneous pyrolysis and char combustion will be improved to be used for calculating combustion under pressure. Experimental work is done with an electrically heated pressurized entrained flow reactor (PEFR) which is equipped with modern analytics (as FT-IR for the analysis of N 2 O, NO and NO 2 and FT-IR pyrometry for the measurement of particle temperatures). The experimental work is carried out in several stages: (a) Study of the formation of HCN and NH 3 during pressurized pyrolysis (b) Oxidation of HCN and NH 3 to nitrogen oxides in pressurized combustion (c) Reduction of NO by NH 3 under pressure (thermax denox) Task a is performed with fuels of various O/N ratio. Task b is performed with pure HCN and NH 3 and with more complicated gas mixtures including HCN and NH 3 . A large part of these results are utilized in kinetic modelling in Aabo Akademi University, Finland in project LIEKKI 2-201. Two kinds of modelling work is performed in VTT in this project (a) Simultaneous modelling of the composition of solid and gaseous phases in the pyrolysis and combustion of a small fuel particle (multiphase modelling) (b) Modelling of pyrolysis and combustion of a single fuel particle under pressurized conditions (single particle modelling). The results can be used in planning of pressurized combustors and in minimizing the emissions of nitrogen oxides. (author)

Estimating patient-specific soft-tissue properties in a TKA knee.

Science.gov (United States)

Ewing, Joseph A; Kaufman, Michelle K; Hutter, Erin E; Granger, Jeffrey F; Beal, Matthew D; Piazza, Stephen J; Siston, Robert A

2016-03-01

Surgical technique is one factor that has been identified as critical to success of total knee arthroplasty. Researchers have shown that computer simulations can aid in determining how decisions in the operating room generally affect post-operative outcomes. However, to use simulations to make clinically relevant predictions about knee forces and motions for a specific total knee patient, patient-specific models are needed. This study introduces a methodology for estimating knee soft-tissue properties of an individual total knee patient. A custom surgical navigation system and stability device were used to measure the force-displacement relationship of the knee. Soft-tissue properties were estimated using a parameter optimization that matched simulated tibiofemoral kinematics with experimental tibiofemoral kinematics. Simulations using optimized ligament properties had an average root mean square error of 3.5° across all tests while simulations using generic ligament properties taken from literature had an average root mean square error of 8.4°. Specimens showed large variability among ligament properties regardless of similarities in prosthetic component alignment and measured knee laxity. These results demonstrate the importance of soft-tissue properties in determining knee stability, and suggest that to make clinically relevant predictions of post-operative knee motions and forces using computer simulations, patient-specific soft-tissue properties are needed. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

The study of thermodynamic properties and transport properties of multicomponent systems with chemical reactions

Directory of Open Access Journals (Sweden)

Samujlov E.

2013-04-01

Full Text Available In case of system with chemical reaction the most important properties are heat conductivity and heat capacity. In this work we have considered the equation for estimate the component of these properties caused by chemical reaction and ionization processes. We have evaluated the contribution of this part in heat conductivity and heat capacity too. At the high temperatures contribution in heat conductivity from ionization begins to play an important role. We have created a model, which describe partial and full ionization of gases and gas mixtures. In addition, in this work we present the comparison of our result with experimental data and data from numerical simulation. We was used the data about transport properties of middle composition of Russian coals and the data of thermophysical properties of natural gas for comparison.

Identifying the ideal profile of French yogurts for different clusters of consumers.

Science.gov (United States)

Masson, M; Saint-Eve, A; Delarue, J; Blumenthal, D

2016-05-01

Identifying the sensory properties that affect consumer preferences for food products is an important feature of product development. Different methods, such as external preference mapping or partial least squares regression, are used to establish relationships between sensory data and consumer preferences and to identify sensory attributes that drive consumer preferences, by highlighting optimum products. Plain French yogurts were evaluated by a sensory profiling method performed by 12 trained judges. In parallel, 180 consumers were asked to score their overall liking and complete a cognitive restraint questionnaire. After hierarchical cluster analysis on the liking scores, preference mapping using a quadratic regression model was performed. Five clusters of consumers were identified as a function of different preference patterns. Contrary to our expectations, fat levels were not discriminating. For each cluster, the results of preference mapping enabled the identification of optimum products. A comparison of the 5 sensory profiles revealed numerous differences between key sensory attributes. For example, one consumer cluster had a strong preference for products perceived as very thick, grainy, but with a less flowing texture, less sticky, whey presence and color, in contrast to other clusters. In addition, each segment of consumers was characterized according to the results of the cognitive restraint questionnaire. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Distributed Persistent Identifiers System Design

Directory of Open Access Journals (Sweden)

Pavel Golodoniuc

2017-06-01

Full Text Available The need to identify both digital and physical objects is ubiquitous in our society. Past and present persistent identifier (PID systems, of which there is a great variety in terms of technical and social implementation, have evolved with the advent of the Internet, which has allowed for globally unique and globally resolvable identifiers. PID systems have, by in large, catered for identifier uniqueness, integrity, and persistence, regardless of the identifier’s application domain. Trustworthiness of these systems has been measured by the criteria first defined by Bütikofer (2009 and further elaborated by Golodoniuc 'et al'. (2016 and Car 'et al'. (2017. Since many PID systems have been largely conceived and developed by a single organisation they faced challenges for widespread adoption and, most importantly, the ability to survive change of technology. We believe that a cause of PID systems that were once successful fading away is the centralisation of support infrastructure – both organisational and computing and data storage systems. In this paper, we propose a PID system design that implements the pillars of a trustworthy system – ensuring identifiers’ independence of any particular technology or organisation, implementation of core PID system functions, separation from data delivery, and enabling the system to adapt for future change. We propose decentralisation at all levels — persistent identifiers and information objects registration, resolution, and data delivery — using Distributed Hash Tables and traditional peer-to-peer networks with information replication and caching mechanisms, thus eliminating the need for a central PID data store. This will increase overall system fault tolerance thus ensuring its trustworthiness. We also discuss important aspects of the distributed system’s governance, such as the notion of the authoritative source and data integrity

Informal caregiving in COPD: A systematic review of instruments and their measurement properties.

Science.gov (United States)

Cruz, Joana; Marques, Alda; Machado, Ana; O'Hoski, Sachi; Goldstein, Roger; Brooks, Dina

2017-07-01

Increasing symptoms and activity restriction associated with COPD progression greatly impact on the lives of their informal caregivers, who play a vital role in maintaining their health. An understanding of this impact is important for clinicians to support caregivers and maintain a viable patient environment at home. This systematic review aimed to identify the instruments commonly used to assess informal caregiving in COPD and describe their measurement properties in this population. Searches were conducted in PubMed, Scopus, Web of Science, CINAHL and PsycINFO and in references of key articles, until November 2016 (PROSPERO: CRD42016041401). Instruments used to assess the impact of COPD on caregivers were identified and their properties described. Quality of studies was rated using the COnsensus-based Standards for the selection of health Measurement INstruments (COSMIN) checklist. Quality of the measurement properties of instruments was rated as 'positive', 'negative' or 'indeterminate'. Patients cared for, had moderate to very severe COPD and the sample of caregivers ranged from 24 to 406. Thirty-five instruments were used in fifty studies to assess caregivers' psychological status and mood (9 instruments), burden/distress (12 instruments), quality of life (5 instruments) or other (9 instruments). Eighteen studies assessed the measurement properties of 21 instruments, most commonly hypothesis testing (known validity) and internal consistency. Study quality varied from 'poor' to 'fair' and with many properties rated as 'indeterminate'. Although several instruments have been used to assess the impact of COPD on caregivers, an increased understanding of their properties is needed before their widespread implementation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Are All Pixels Equally Important?

CERN Multimedia

CERN. Geneva

2015-01-01

When we look at our environment, we primarily pay attention to visually distinctive objects. We refer to these objects as visually important or salient. For efficient visual processing, the human visual system identifies salients objects and dedicates most of its processing resources to them. An analogous resource allocation can be performed by salient-object detection algorithms, which identify objects of interest in an image. Consequently, thanks to salient-object detection, complex visual computing operations can focus on the important parts of the visual data and can save time and resources. About the speaker Dr. Gokhan Yildirim is a research assistant in the School of Computer and Communication Sciences (IC) at the École Polytechnique Fédérale de Lausanne (EPFL). His research interests include image understanding, multimedia, pattern recognition, machine learning, salient-object detection on images & videos and its applications on image proces...

Properties of mathematical objects (Goedel on classes, properties and concepts)

International Nuclear Information System (INIS)

Materna, Pavel

2007-01-01

In terms of a sufficiently fine-grained theory we should distinguish between classes, properties and concepts. Since properties are best modeled as a kind of non-trivial intensions while mathematical objects are never non-trivial intensions we should not speak about properties of mathematical objects. When we do use the term property in mathematics (as Goedel did) we either mean classes, or the more fine-grained entities to be called concepts. In the latter case concepts have to be defined so that various distinct concepts could identify one and the same object. The notion of construction in transparent intensional logic makes it possible to construe concepts as abstract procedures. At the same time we have to distinguish between this notion and the notion of construction in constructivist systems: the former - unlike the latter - are objective and, therefore, acceptable for a realist

A comparison of coronal mass ejections identified by manual and automatic methods

Directory of Open Access Journals (Sweden)

S. Yashiro

2008-10-01

Full Text Available Coronal mass ejections (CMEs are related to many phenomena (e.g. flares, solar energetic particles, geomagnetic storms, thus compiling of event catalogs is important for a global understanding these phenomena. CMEs have been identified manually for a long time, but in the SOHO era, automatic identification methods are being developed. In order to clarify the advantage and disadvantage of the manual and automatic CME catalogs, we examined the distributions of CME properties listed in the CDAW (manual and CACTus (automatic catalogs. Both catalogs have a good agreement on the wide CMEs (width>120° in their properties, while there is a significant discrepancy on the narrow CMEs (width≤30°: CACTus has a larger number of narrow CMEs than CDAW. We carried out an event-by-event examination of a sample of events and found that the CDAW catalog have missed many narrow CMEs during the solar maximum. Another significant discrepancy was found on the fast CMEs (speed>1000 km/s: the majority of the fast CDAW CMEs are wide and originate from low latitudes, while the fast CACTus CMEs are narrow and originate from all latitudes. Event-by-event examination of a sample of events suggests that CACTus has a problem on the detection of the fast CMEs.

Identifying open magnetic field regions of the Sun and their heliospheric counterparts

Science.gov (United States)

Krista, L. D.; Reinard, A.

2017-12-01

Open magnetic regions on the Sun are either long-lived (coronal holes) or transient (dimmings) in nature. Both phenomena are fundamental to our understanding of the solar behavior as a whole. Coronal holes are the sources of high-speed solar wind streams that cause recurrent geomagnetic storms. Furthermore, the variation of coronal hole properties (area, location, magnetic field strength) over the solar activity cycle is an important marker of the global evolution of the solar magnetic field. Dimming regions, on the other hand, are short-lived coronal holes that often emerge in the wake of solar eruptions. By analyzing their physical properties and their temporal evolution, we aim to understand their connection with their eruptive counterparts (flares and coronal mass ejections) and predict the possibility of a geomagnetic storm. The author developed the Coronal Hole Automated Recognition and Monitoring (CHARM) and the Coronal Dimming Tracker (CoDiT) algorithms. These tools not only identify but track the evolution of open magnetic field regions. CHARM also provides daily coronal hole maps, that are used for forecasts at the NOAA Space Weather Prediction Center. Our goal is to better understand the processes that give rise to eruptive and non-eruptive open field regions and investigate how these regions evolve over time and influence space weather.

Commercially important properties of plants of the genus Plantago

Directory of Open Access Journals (Sweden)

Elżbieta Weryszko-Chmielewska

2012-12-01

Full Text Available The centuries-old experience of folk medicine, nutritional traditions, and the results of numerous research studies show that plants of the genus Plantago can be used for medicinal, cosmetic, dietetic, and ritual purposes. In the phytochemical composition of Plantago, there is an abundance of biologically active substances (among others, glycosides, flavonoids, polysaccharides, and vitamins exhibiting beneficial effects and, simultaneously, there is a low content of compounds that may exert a toxic effect. Scientific research has confirmed that Plantago plants have antioxidative, apoptosis-inhibiting, protective, healing-enhancing, spasmolytic, anthelmintic, and antimicrobial properties; they inhibit the development of some tumours, reduce the level of lipids in blood and inhibit tissue glycation. In phytotherapy, leaves, stems, and/or seeds of different plantain species are used. Plantago leaves and seeds are also used to manufacture creams, lotions, and face masks. Different parts of these plants (fresh plant material, extracts, or isolated substances are also used in human and animal nutrition. Plantain leaves can be eaten like lettuce or added to salads, fried in pastry, used to prepare a tea, juice, or wine. Its seeds are added to cakes, bread, breakfast cereals, ice cream, and drinks, or they are cooked like groats. Animals fed with plantain can live longer and are healthier, while meat derived from such animals is tastier and healthier to humans. Plantago seeds are readily eaten by cage birds. Plantain pollen, produced in large amounts (up to 20,000 pollen grains per 1 stamen of P. lancolata, can cause allergies in sensitive people. Due to a long flowering period of plants of the genus Plantago, the effect of the allergenic factor persists for many weeks. In Poland days with the maximum concentration of airborne plantain pollen most often occur in July.

Environmental audits of oil and gas properties

International Nuclear Information System (INIS)

Moody, T.D.; Forbes, S.

1991-01-01

The growing concern over one, the cost of correcting environmental damage and two, the potential financial liabilities associated with the acquisition, sale or lease of oil and gas properties, has led many prospective buyers to investigate the environmental liabilities associated with the property transfer. The environmental audit provides a tool or mechanism to assist the prudent investor in identifying environmental problems that could adversely effect an otherwise normal business activity. Accordingly, an environmental audit can identify potential environmental liabilities associated with the property, thus allowing the investor an opportunity to better assess financial risks. In addition, should the negative findings of the environmental audit be limited, the findings could be used by the buyer in negotiating the final price of the subject property to account for potential or known liabilities. As this suggests, environmental damage to an oil and gas property does not necessarily render the property worthless. This paper provides a brief guide on environmental audits of oil and gas properties as well as general information on the most common exploration and production wastes

Anti-adhesive properties of fish tropomyosins

DEFF Research Database (Denmark)

Vejborg, Rebecca Munk; Bernbom, Nete; Gram, Lone

2008-01-01

Aims: We have recently found that preconditioning of stainless steel surfaces with an aqueous fish muscle extract can significantly impede bacterial adhesion. The purpose of this study was to identify and characterize the primary components associated with this bacteria-repelling effect. Methods...... to the formation of a proteinaceous conditioning film composed primarily of fish tropomyosins. These fibrous proteins formed a considerable anti-adhesive conditioning layer on and reduced bacterial adhesion to several different materials including polystyrene, vinyl plastic, stainless steel and glass. The protein...... the importance of substratum's physiochemical properties and exposure time with regards to protein adsorption/elution efficiency and subsequent bacterial adhesion. Significance and Impact of the Study: Fish tropomyosin-coatings could potentially offer a nontoxic and relatively inexpensive measure of reducing...

Identifiers for the 21st century: How to design, provision, and reuse persistent identifiers to maximize utility and impact of life science data.

Science.gov (United States)

McMurry, Julie A; Juty, Nick; Blomberg, Niklas; Burdett, Tony; Conlin, Tom; Conte, Nathalie; Courtot, Mélanie; Deck, John; Dumontier, Michel; Fellows, Donal K; Gonzalez-Beltran, Alejandra; Gormanns, Philipp; Grethe, Jeffrey; Hastings, Janna; Hériché, Jean-Karim; Hermjakob, Henning; Ison, Jon C; Jimenez, Rafael C; Jupp, Simon; Kunze, John; Laibe, Camille; Le Novère, Nicolas; Malone, James; Martin, Maria Jesus; McEntyre, Johanna R; Morris, Chris; Muilu, Juha; Müller, Wolfgang; Rocca-Serra, Philippe; Sansone, Susanna-Assunta; Sariyar, Murat; Snoep, Jacky L; Soiland-Reyes, Stian; Stanford, Natalie J; Swainston, Neil; Washington, Nicole; Williams, Alan R; Wimalaratne, Sarala M; Winfree, Lilly M; Wolstencroft, Katherine; Goble, Carole; Mungall, Christopher J; Haendel, Melissa A; Parkinson, Helen

2017-06-01

In many disciplines, data are highly decentralized across thousands of online databases (repositories, registries, and knowledgebases). Wringing value from such databases depends on the discipline of data science and on the humble bricks and mortar that make integration possible; identifiers are a core component of this integration infrastructure. Drawing on our experience and on work by other groups, we outline 10 lessons we have learned about the identifier qualities and best practices that facilitate large-scale data integration. Specifically, we propose actions that identifier practitioners (database providers) should take in the design, provision and reuse of identifiers. We also outline the important considerations for those referencing identifiers in various circumstances, including by authors and data generators. While the importance and relevance of each lesson will vary by context, there is a need for increased awareness about how to avoid and manage common identifier problems, especially those related to persistence and web-accessibility/resolvability. We focus strongly on web-based identifiers in the life sciences; however, the principles are broadly relevant to other disciplines.

Identifiers for the 21st century: How to design, provision, and reuse persistent identifiers to maximize utility and impact of life science data.

Directory of Open Access Journals (Sweden)

Julie A McMurry

2017-06-01

Full Text Available In many disciplines, data are highly decentralized across thousands of online databases (repositories, registries, and knowledgebases. Wringing value from such databases depends on the discipline of data science and on the humble bricks and mortar that make integration possible; identifiers are a core component of this integration infrastructure. Drawing on our experience and on work by other groups, we outline 10 lessons we have learned about the identifier qualities and best practices that facilitate large-scale data integration. Specifically, we propose actions that identifier practitioners (database providers should take in the design, provision and reuse of identifiers. We also outline the important considerations for those referencing identifiers in various circumstances, including by authors and data generators. While the importance and relevance of each lesson will vary by context, there is a need for increased awareness about how to avoid and manage common identifier problems, especially those related to persistence and web-accessibility/resolvability. We focus strongly on web-based identifiers in the life sciences; however, the principles are broadly relevant to other disciplines.

Importance of intrinsic properties of dense caseinate dispersions for structure formation.

Science.gov (United States)

Manski, Julita M; van Riemsdijk, Lieke E; van der Goot, Atze J; Boom, Remko M

2007-11-01

Rheological measurements of dense calcium caseinate and sodium caseinate dispersions (> or =15%) provided insight into the factors determining shear-induced structure formation in caseinates. Calcium caseinate at a sufficiently high concentration (30%) was shown to form highly anisotropic structures during shearing and concurrent enzymatic cross-linking. In contrast, sodium caseinate formed isotropic structures using similar processing conditions. The main difference between the two types of caseinates is the counterion present, and as a consequence, the size of structural elements and their interactions. The rheological behavior of calcium caseinate and sodium caseinate reflected these differences, yielding non-monotonic and shear thinning flow behavior for calcium caseinate whereas sodium caseinate behaved only slightly shear thinning. It appears that the intrinsic properties of the dense caseinate dispersions, which are reflected in their rheological behavior, affect the structure formation that was found after applying shear. Therefore, rheological measurements are useful to obtain an indication of the structure formation potential of caseinate dispersions.

Phytochemical and Pharmacological Properties of Gymnema sylvestre: An Important Medicinal Plant

Directory of Open Access Journals (Sweden)

Pragya Tiwari

2014-01-01

Full Text Available Gymnema sylvestre (Asclepiadaceae, popularly known as “gurmar” for its distinct property as sugar destroyer, is a reputed herb in the Ayurvedic system of medicine. The phytoconstituents responsible for sweet suppression activity includes triterpene saponins known as gymnemic acids, gymnemasaponins, and a polypeptide, gurmarin. The herb exhibits a broad range of therapeutic effects as an effective natural remedy for diabetes, besides being used for arthritis, diuretic, anemia, osteoporosis, hypercholesterolemia, cardiopathy, asthma, constipation, microbial infections, indigestion, and anti-inflammatory. G. sylvestre has good prospects in the treatment of diabetes as it shows positive effects on blood sugar homeostasis, controls sugar cravings, and promotes regeneration of pancreas. The herbal extract is used in dietary supplements since it reduces body weight, blood cholesterol, and triglyceride levels and holds great prospects in dietary as well as pharmacological applications. This review explores the transition of a traditional therapeutic to a modern contemporary medication with an overview of phytochemistry and pharmacological activities of the herb and its phytoconstituents.

Identifying Factors for Worker Motivation in Zambia's Rural Health Facilities.

Science.gov (United States)

Cross, Samuel S; Baernholdt, Dr Marianne

2017-01-01

Within Zambia there is a shortage of health workers in rural areas. This study aims to identify motivating factors for retaining rural health workers. Sixty rural health workers completed surveys and 46 were interviewed. They rated the importance of six motivating factors and discussed these and other factors in interviews. An interview was conducted with a Government Human Resources Manager (HR Manager) to elicit contextual information. All six factors were identified as being very important motivators, as were two additional factors. Additional career training was identified by many as the most important factor. Comparison of results and the HR Manager interview revealed that workers lacked knowledge about opportunities and that the HR manager was aware of barriers to career development. The Zambian government might better motivate and retain rural health workers by offering them any combination of identified factors, and by addressing the barriers to career development.

History of an Issue – Property

Directory of Open Access Journals (Sweden)

Niadi-Corina CERNICA,

2012-12-01

Full Text Available Property becomes a issue of philosophy and political reflections owing to Platon`s “Republic”. In this dialogue, the military class of his political Utopia is obliged not to possess goods. So that the Republic is more important than their interests. For this reason the military class is obliged not to have family. The interest of Republic is more important than the individual interests. David Hume thinks the right comes from the property (the two concepts have developed correspondingly. Property is a result of human natural needs. The needs are complied with the property. Human nature implies the property. John Locke affirms property comes from work, so it is a moral right. J.J. Rousseau thinks the property is the origin of social and political inequality, in contrast with natural equality of human beings. Karl Marx affirms property is the origin of alienation. Property is the origin of estrangement of human beings from themselves. “Marxist humanism” implies to regain the dignity of work and the social dignity. Other philosophers think the property is a warrant of freedom. Property was tied to social interests (Platon, to morality (Thomas Morus, John Locke, to human nature (J. J. Rousseau, David Hume, Karl Marx and freedom.

Identifying Controlling Nodes in Neuronal Networks in Different Scales

Science.gov (United States)

Tang, Yang; Gao, Huijun; Zou, Wei; Kurths, Jürgen

2012-01-01

Recent studies have detected hubs in neuronal networks using degree, betweenness centrality, motif and synchronization and revealed the importance of hubs in their structural and functional roles. In addition, the analysis of complex networks in different scales are widely used in physics community. This can provide detailed insights into the intrinsic properties of networks. In this study, we focus on the identification of controlling regions in cortical networks of cats’ brain in microscopic, mesoscopic and macroscopic scales, based on single-objective evolutionary computation methods. The problem is investigated by considering two measures of controllability separately. The impact of the number of driver nodes on controllability is revealed and the properties of controlling nodes are shown in a statistical way. Our results show that the statistical properties of the controlling nodes display a concave or convex shape with an increase of the allowed number of controlling nodes, revealing a transition in choosing driver nodes from the areas with a large degree to the areas with a low degree. Interestingly, the community Auditory in cats’ brain, which has sparse connections with other communities, plays an important role in controlling the neuronal networks. PMID:22848475

Molecular structure based property modeling: Development/ improvement of property models through a systematic property-data-model analysis

DEFF Research Database (Denmark)

Hukkerikar, Amol Shivajirao; Sarup, Bent; Sin, Gürkan

2013-01-01

models. To make the property-data-model analysis fast and efficient, an approach based on the “molecular structure similarity criteria” to identify molecules (mono-functional, bi-functional, etc.) containing specified set of structural parameters (that is, groups) is employed. The method has been applied...

Optimization of mechanical properties, biocorrosion properties and antibacterial properties of wrought Ti-3Cu alloy by heat treatment

Directory of Open Access Journals (Sweden)

Mianmian Bao

2018-03-01

Full Text Available Previous study has shown that Ti-3Cu alloy shows good antibacterial properties (>90% antibacterial rate, but the mechanical properties still need to be improved. In this paper, a series of heat-treatment processes were selected to adjust the microstructure in order to optimize the properties of Ti-3Cu alloy. Microstructure, mechanical properties, biocorrosion properties and antibacterial properties of wrought Ti-3Cu alloy at different conditions was systematically investigated by X-ray diffraction, optical microscope, scanning electron microscope, transmission electron microscopy, electrochemical measurements, tensile test, fatigue test and antibacterial test. Heat treatment could significantly improve the mechanical properties, corrosion resistance and antibacterial rate due to the redistribution of copper elements and precipitation of Ti2Cu phase. Solid solution treatment increased the yield strength from 400 to 740 MPa and improved the antibacterial rate from 33% to 65.2% while aging treatment enhanced the yield strength to 800–850 MPa and antibacterial rate (>91.32%. It was demonstrated that homogeneous distribution and fine Ti2Cu phase plays a very important role in mechanical properties, corrosion resistance and antibacterial properties.

Optimization of mechanical properties, biocorrosion properties and antibacterial properties of wrought Ti-3Cu alloy by heat treatment.

Science.gov (United States)

Bao, Mianmian; Liu, Ying; Wang, Xiaoyan; Yang, Lei; Li, Shengyi; Ren, Jing; Qin, Gaowu; Zhang, Erlin

2018-03-01

Previous study has shown that Ti-3Cu alloy shows good antibacterial properties (>90% antibacterial rate), but the mechanical properties still need to be improved. In this paper, a series of heat-treatment processes were selected to adjust the microstructure in order to optimize the properties of Ti-3Cu alloy. Microstructure, mechanical properties, biocorrosion properties and antibacterial properties of wrought Ti-3Cu alloy at different conditions was systematically investigated by X-ray diffraction, optical microscope, scanning electron microscope, transmission electron microscopy, electrochemical measurements, tensile test, fatigue test and antibacterial test. Heat treatment could significantly improve the mechanical properties, corrosion resistance and antibacterial rate due to the redistribution of copper elements and precipitation of Ti 2 Cu phase. Solid solution treatment increased the yield strength from 400 to 740 MPa and improved the antibacterial rate from 33% to 65.2% while aging treatment enhanced the yield strength to 800-850 MPa and antibacterial rate (>91.32%). It was demonstrated that homogeneous distribution and fine Ti 2 Cu phase plays a very important role in mechanical properties, corrosion resistance and antibacterial properties.

Material Property Estimation for Direct Detection of DNAPL using Integrated Ground-Penetrating Radar Velocity, Imaging and Attribute Analysis

Energy Technology Data Exchange (ETDEWEB)

John H. Bradford; Stephen Holbrook; Scott B. Smithson

2004-12-09

The focus of this project is direct detection of DNAPL's specifically chlorinated solvents, via material property estimation from multi-fold surface ground-penetrating radar (GPR) data. We combine state-of-the-art GPR processing methodology with quantitative attribute analysis and material property estimation to determine the location and extent of residual and/or pooled DNAPL in both the vadose and saturated zones. An important byproduct of our research is state-of-the-art imaging which allows us to pinpoint attribute anomalies, characterize stratigraphy, identify fracture zones, and locate buried objects.

Finding identifiable parameter combinations in nonlinear ODE models and the rational reparameterization of their input-output equations.

Science.gov (United States)

Meshkat, Nicolette; Anderson, Chris; Distefano, Joseph J

2011-09-01

When examining the structural identifiability properties of dynamic system models, some parameters can take on an infinite number of values and yet yield identical input-output data. These parameters and the model are then said to be unidentifiable. Finding identifiable combinations of parameters with which to reparameterize the model provides a means for quantitatively analyzing the model and computing solutions in terms of the combinations. In this paper, we revisit and explore the properties of an algorithm for finding identifiable parameter combinations using Gröbner Bases and prove useful theoretical properties of these parameter combinations. We prove a set of M algebraically independent identifiable parameter combinations can be found using this algorithm and that there exists a unique rational reparameterization of the input-output equations over these parameter combinations. We also demonstrate application of the procedure to a nonlinear biomodel. Copyright © 2011 Elsevier Inc. All rights reserved.

Property Model-based Tailor-made Design of Chemical-based Products

DEFF Research Database (Denmark)

Kalakul, Sawitree

Computer-aided model-based methods and tools are increasingly playing important roles in chemical product design. They have the potential to very quickly search for and identify reliable product candidates that can then be verified through experiments. Inthis way, the time and resources spent...... on experiment are reduced leading to faster and cheaper to market the products. The tools also help to manage the solution of product design problems, which usually require efficient handling of model-data-knowledge from different sources and at different time and size scales. The main contribution...... the needed template for a desired product is not available. VPPD-Lab employs a suite of algorithms(such as database search, molecular and mixture blend design) and toolboxes (such asproperty calculations and property model consistency tests) for specific product property prediction, design, and/or analysis...

Institutional framework of state property pledge in nizhniy Novgorod Rregion

Directory of Open Access Journals (Sweden)

Tat'yana Nikolaevna Danilova

2012-09-01

Full Text Available Collateral legal relations are an important factor of the investment process development. They reduce opportunistic loan risks and increase partners’ confidence within the transaction. The mortgage fund of Nizhniy Novgorod region is nowadays involved in the implementation of investment and innovation projects up to 70%. Although theinstitutionalenvironment of regional collateral relation has drastically improved in the last 11 years, the current status is far away from the ideal. Imperfect legal framework of collateral legal relations with the public property leads not only to information asymmetry, but also to a reduced states’ incomefrom thesetransactions. The paper analyzes the current legislative pledge of state property, describes the main steps of its modernization, identifies the positive aspects and trends, as well as deficiencies, provides and gives a proof of necessary legal framework changes aimed at collateral financial relations efficiency improvement in the region

A new uncertainty importance measure

International Nuclear Information System (INIS)

Borgonovo, E.

2007-01-01

Uncertainty in parameters is present in many risk assessment problems and leads to uncertainty in model predictions. In this work, we introduce a global sensitivity indicator which looks at the influence of input uncertainty on the entire output distribution without reference to a specific moment of the output (moment independence) and which can be defined also in the presence of correlations among the parameters. We discuss its mathematical properties and highlight the differences between the present indicator, variance-based uncertainty importance measures and a moment independent sensitivity indicator previously introduced in the literature. Numerical results are discussed with application to the probabilistic risk assessment model on which Iman [A matrix-based approach to uncertainty and sensitivity analysis for fault trees. Risk Anal 1987;7(1):22-33] first introduced uncertainty importance measures

Identifying organisational principles and management practices important to the quality of health care services for chronic conditions

DEFF Research Database (Denmark)

Frølich, Anne

2012-01-01

are limited, it is necessary to identify efficient methods to improve the quality of care. Comparing health care systems is a well-known method for identifying new knowledge regarding, for instance, organisational methods and principles. Kaiser Permanente (KP), an integrated health care delivery system...... in the U.S., is recognized as providing high-quality chronic care; to some extent, this is due to KP's implementation of the chronic care model (CCM). This model recommends a range of evidence-based management practices that support the implementation of evidence-based medicine. However, it is not clear...... which management practices in the CCM are most efficient and in what combinations. In addition, financial incentives and public reporting of performance are often considered effective at improving the quality of health care services, but this has not yet been definitively proved....

Thiosemicarbazones: preparation methods, synthetic applications and biological importance

International Nuclear Information System (INIS)

Tenorio, Romulo P.; Goes, Alexandre J.S.; Lima, Jose G. de; Faria, Antonio R. de; Alves, Antonio J.; Aquino, Thiago M. de

2005-01-01

Thiosemicarbazones are a class of compounds known by their chemical and biological properties, such as antitumor, antibacterial, antiviral and antiprotozoal activity. Their ability to form chelates with metals has great importance in their biological activities. Their synthesis is very simple, versatile and clean, usually giving high yields. They are largely employed as intermediates, in the synthesis of others compounds. This article is a survey of some of these characteristics showing their great importance to organic and medicinal chemistry. (author)

Responsiveness and minimal clinically important change

DEFF Research Database (Denmark)

Christiansen, David Høyrup; Frost, Poul; Falla, Deborah

2015-01-01

Study Design A prospective cohort study nested in a randomized controlled trial. Objectives To determine and compare responsiveness and minimal clinically important change of the modified Constant score (CS) and the Oxford Shoulder Score (OSS). Background The OSS and the CS are commonly used...... to assess shoulder outcomes. However, few studies have evaluated the measurement properties of the OSS and CS in terms of responsiveness and minimal clinically important change. Methods The study included 126 patients who reported having difficulty returning to usual activities 8 to 12 weeks after...... were observed for the CS and the OSS. Minimal clinically important change ROC values were 6 points for the OSS and 11 points for the CS, with upper 95% cutoff limits of 12 and 22 points, respectively. Conclusion The CS and the OSS were both suitable for assessing improvement after decompression surgery....

Evaluations and utilizations of risk importances

International Nuclear Information System (INIS)

Vesely, W.E.; Davis, T.C.

1985-08-01

This report presents approaches for utilizing Probabilistic Risk Analyses (PRA's) to determine risk importances. Risk importances are determined for design features, plant operations, and other factors that can affect risk. PRA's can be used to identify the importances of risk contributors or proposed changes to designs or operations. The objective of this report is to serve as a handbook and guide in evaluating and applying risk importances. The utilization of both qualitative risk importances and quantitative risk importances is described in this report. Qualitative risk importances are based on the logic models in the PRA, while quantitative risk importances are based on the quantitative results of the PRA. Both types of importances are among the most robust and meaningful information a PRA can provide. A wide variety of risk importance evaluations are described including evaluations of the importances of design changes, testing, maintenance, degrading environments, and aging. Specific utilizations are described in inspection and in reliability assurance programs, however the general approaches have widespread applicability. The role of personal computers and decision support programs in applying risk importance evaluations is also described

Capturing optically important constituents and properties in a marine biogeochemical and ecosystem model

Science.gov (United States)

Dutkiewicz, S.; Hickman, A. E.; Jahn, O.; Gregg, W. W.; Mouw, C. B.; Follows, M. J.

2015-07-01

We present a numerical model of the ocean that couples a three-stream radiative transfer component with a marine biogeochemical-ecosystem component in a dynamic three-dimensional physical framework. The radiative transfer component resolves the penetration of spectral irradiance as it is absorbed and scattered within the water column. We explicitly include the effect of several optically important water constituents (different phytoplankton functional types; detrital particles; and coloured dissolved organic matter, CDOM). The model is evaluated against in situ-observed and satellite-derived products. In particular we compare to concurrently measured biogeochemical, ecosystem, and optical data along a meridional transect of the Atlantic Ocean. The simulation captures the patterns and magnitudes of these data, and estimates surface upwelling irradiance analogous to that observed by ocean colour satellite instruments. We find that incorporating the different optically important constituents explicitly and including spectral irradiance was crucial to capture the variability in the depth of the subsurface chlorophyll a (Chl a) maximum. We conduct a series of sensitivity experiments to demonstrate, globally, the relative importance of each of the water constituents, as well as the crucial feedbacks between the light field, the relative fitness of phytoplankton types, and the biogeochemistry of the ocean. CDOM has proportionally more importance at attenuating light at short wavelengths and in more productive waters, phytoplankton absorption is relatively more important at the subsurface Chl a maximum, and water molecules have the greatest contribution when concentrations of other constituents are low, such as in the oligotrophic gyres. Scattering had less effect on attenuation, but since it is important for the amount and type of upwelling irradiance, it is crucial for setting sea surface reflectance. Strikingly, sensitivity experiments in which absorption by any of the

TECHNOLOGICAL AND FUNCTIONAL PROPERTIES OF LACTIC ACID BACTERIA: THE IMPORTANCE OF THESE MICROORGANISMS FOR FOOD

Directory of Open Access Journals (Sweden)

Amanda de Souza Motta

2015-12-01

Full Text Available Eacters of coccus or rods Gram-positive, catalase negative, non-sporulating, which produce lactic acid as the major end product during the fermentation of carbohydrates. When applied on food, provides beneficial effects to consumers through its functional and technological properties. With this the present review article, explore the potential application of lactic acid bacteria in food. The following genera are considered the principal lactic acid bacteria: Aerococcus, Carnobacterium, Enterococcus, Lactobacillus, Lactococcus, Leuconostoc, Oenococcus, Pediococcus, Streptococcus, Tetragenococcus, Vagococcus and Weissella. These cultures have been used as starter or adjunct cultures for the fermentation of foods and beverages due to their contributions to the sensorial characteristics of these products and by microbiological stability. Their probiotic properties have also been investigated. More recent studies by indigenous cultures have received increased attention in light of the search for isolated cultures of a given raw material and a certain region. These microorganisms are being investigated for its functional and technological potential that may be applied in product development with its own characteristics and designation of origin. Those properties will be discussed in the present review in order to highlight the performance of these bacteria and the high degree of control over the fermentation process and standardization of the final product. The use of autochthonous cultures will be considered due the increase of studies of new cultures of lactic acid bacteria isolated of milk and meat of distinct products.

Effect of irradiation on functional properties of Gum Tragacanth

Directory of Open Access Journals (Sweden)

Neda Mollakhalili meybodi

2017-03-01

Full Text Available Background and objective: irradiation is a physical treatment in which products are exposed to ionized radiation such as gamma and x rays to improve the security and quality. Hydrocolloids are components that are used in food science to improve texture properties. Exposing to irradiation treatment may change structural and functional properties. By regard to the importance of irradiation on decontaminating of hydrocolloids in food application, the aim of this study is studying the effect of irradiation at different doses on functional properties of Gum Tragacanth in food application. Material and methods: effect of irradiation treatment was studied on the rheological properties, zeta potential, particle size distribution and surface tension of dispersion systems contained 0/5% w/ w gum tragacanth that is irradiated at different doses (0, 0.75. 3, 5 kGy. The effect of irradiation on rheological properties was monitored by rheometer. In order to monitor the effect of irradiation treatment on particle size distribution, zeta potential and surface tension, particle sizer, Brookhaven zeta plus and tensiometer sere used respectively. All treatments were performed three times and the data were analyzed by one way ANOVA. Significant differences between means were identified (P values < 0.05 using Duncan test. Results: Irradiation, change rheologiacal properties and particle size distribution of dispersion contained gum tragacanth. Irradiation treatment up to 0.75 kGy increase zeta potential, but irradiating at higher doses decrease it again. Results of studying parameters showed that irradiation changes the functional properties by affecting on structure. These changes depend on irradiation dose Conclusion: Gum tragacanth irradiation may improve the functional properties by affecting on structure.

Importance of soil-water relation in assessment endpoint in bioremediated soils: Plant growth and soil physical properties

International Nuclear Information System (INIS)

Li, X.; Sawatsky, N.

1995-01-01

Much effort has been focused on defining the end-point of bioremediated soils by chemical analysis (Alberta Tier 1 or CCME Guideline for Contaminated Soils) or toxicity tests. However, these tests do not completely assess the soil quality, or the capability of soil to support plant growth after bioremediation. This study compared barley (Hordeum vulgare) growth on: (i) non-contaminated, agricultural topsoil, (2) oil-contaminated soil (4% total extractable hydrocarbons, or TEH), and (3) oil-contaminated soil treated by bioremediation (< 2% TEH). Soil physical properties including water retention, water uptake, and water repellence were measured. The results indicated that the growth of barley was significantly reduced by oil-contamination of agricultural topsoil. Furthermore, bioremediation did not improve the barley yield. The lack of effects from bioremediation was attributed to development of water repellence in hydrocarbon contaminated soils. There seemed to be a critical water content around 18% to 20% in contaminated soils. Above this value the water uptake by contaminated soil was near that of the agricultural topsoil. For lower water contents, there was a strong divergence in sorptivity between contaminated and agricultural topsoil. For these soils, water availability was likely the single most important parameter controlling plant growth. This parameter should be considered in assessing endpoint of bioremediation for hydrocarbon contaminated soils

Importance of the textural characteristics of inert additives in the reduction of coal thermoplastic properties

Energy Technology Data Exchange (ETDEWEB)

A.M. Fernandez; C. Barriocanal; M.A. Diez; R. Alvarez [Instituto Nacional del Carbon, Oviedo (Spain)

2010-11-15

Seven carbonaceous materials of different origin were chosen in order to study the influence of their porous structure on the modification of the thermoplastic properties of a bituminous coal. The materials included were: two non-coking coals, a petroleum coke, coke fines, two residues from tyre recycling and a bituminous residue. The materials were heat-treated to 900{sup o}C to prevent any chemical interaction between the volatiles evolved during co-carbonization. The thermoplastic properties of blends that contained 10 wt.% of additive were measured by means of the Gieseler test. Microporosity was measured by CO{sub 2} adsorption at 273 K, whereas meso and macroporosity were determined by means of mercury porosimetry. The results of the porous structure assessment are discussed in relation to the modification of coal plasticity. 32 refs., 5 figs., 5 tabs.

Level of importance attached to competitive intelligence at a mass import retail organization

Directory of Open Access Journals (Sweden)

M. Begg

2007-12-01

Full Text Available The purpose of this research was to establish the level of importance attached to competitive intelligence (CI at a mass import retail organization in South Africa. The rationale of CI is to alert an organization about the current situation as it relates to its business environment and competitors, and how these aspects affect the competitive situation. In this article, the value and significance that CI presents to organizations upon implementation are discussed by focusing upon the need for a competitive strategy, the significance of institutionalizing CI, various organizational structure options and the establishment of a CI culture. A survey was conducted at a mass import retail organization to determine the level of importance attached to CI. A total of 107 employees were randomly selected to participate in the completion of a questionnaire. Based on the results, it was found that this organization practised CI, albeit in an informal manner, and it was concluded that there was a relatively high level of importance attached to CI within this organization. However, areas for improvement were identified and a recommendation was made of implementing a formal CI function within the organization.

Level of importance attached to competitive intelligence at a mass import retail organization

Directory of Open Access Journals (Sweden)

M. Begg

2008-01-01

Full Text Available The purpose of this research was to establish the level of importance attached to competitive intelligence (CI at a mass import retail organization in South Africa. The rationale of CI is to alert an organization about the current situation as it relates to its business environment and competitors, and how these aspects affect the competitive situation. In this article, the value and significance that CI presents to organizations upon implementation are discussed by focusing upon the need for a competitive strategy, the significance of institutionalizing CI, various organizational structure options and the establishment of a CI culture. A survey was conducted at a mass import retail organization to determine the level of importance attached to CI. A total of 107 employees were randomly selected to participate in the completion of a questionnaire. Based on the results, it was found that this organization practised CI, albeit in an informal manner, and it was concluded that there was a relatively high level of importance attached to CI within this organization. However, areas for improvement were identified and a recommendation was made of implementing a formal CI function within the organization.

Core personal competencies important to entering students' success in medical school: what are they and how could they be assessed early in the admission process?

Science.gov (United States)

Koenig, Thomas W; Parrish, Samuel K; Terregino, Carol A; Williams, Joy P; Dunleavy, Dana M; Volsch, Joseph M

2013-05-01

Assessing applicants' personal competencies in the admission process has proven difficult because there is not an agreed-on set of personal competencies for entering medical students. In addition, there are questions about the measurement properties and costs of currently available assessment tools. The Association of American Medical College's Innovation Lab Working Group (ILWG) and Admissions Initiative therefore engaged in a multistep, multiyear process to identify personal competencies important to entering students' success in medical school as well as ways to measure them early in the admission process. To identify core personal competencies, they conducted literature reviews, surveyed U.S and Canadian medical school admission officers, and solicited input from the admission community. To identify tools with the potential to provide data in time for pre-interview screening, they reviewed the higher education and employment literature and evaluated tools' psychometric properties, group differences, risk of coaching/faking, likely applicant and admission officer reactions, costs, and scalability. This process resulted in a list of nine core personal competencies rated by stakeholders as very or extremely important for entering medical students: ethical responsibility to self and others; reliability and dependability; service orientation; social skills; capacity for improvement; resilience and adaptability; cultural competence; oral communication; and teamwork. The ILWG's research suggests that some tools hold promise for assessing personal competencies, but the authors caution that none are perfect for all situations. They recommend that multiple tools be used to evaluate information about applicants' personal competencies in deciding whom to interview.

Identifying Genes Controlling Ferulate Cross-Linking Formation in Grass Cell Walls

Energy Technology Data Exchange (ETDEWEB)

de O. Buanafina, Marcia Maria [Pennsylvania State Univ., University Park, PA (United States)

2013-10-16

This proposal focuses on cell wall feruloylation and our long term goal is to identify and isolate novel genes controlling feruloylation and to characterize the phenotype of mutants in this pathway, with a spotlight on cell wall properties.

Electrochemical Behavior of Biologically Important Indole Derivatives

Directory of Open Access Journals (Sweden)

Cigdem Karaaslan

2011-01-01

Full Text Available Voltammetric techniques are most suitable to investigate the redox properties of a new drug. Use of electrochemistry is an important approach in drug discovery and research as well as quality control, drug stability, and determination of physiological activity. The indole nucleus is an essential element of a number of natural and synthetic products with significant biological activity. Indole derivatives are the well-known electroactive compounds that are readily oxidized at carbon-based electrodes, and thus analytical procedures, such as electrochemical detection and voltammetry, have been developed for the determination of biologically important indoles. This paper explains some of the relevant and recent achievements in the electrochemistry processes and parameters mainly related to biologically important indole derivatives in view of drug discovery and analysis.

Making and Breaking Property Rights

DEFF Research Database (Denmark)

Justesen, Mogens Kamp

2015-01-01

This paper analyzes why some governments protect property rights while others do not. Although institutional constraints may affect government incentives to protect property rights, the paper emphasizes that different political institutions have dissimilar effects. Coalition institutions that make...... governments accountable to large groups in society are particularly important, whereas division of powers between veto players is hypothesized to have more ambiguous effects on property rights. Empirical analyses of panel data support the proposition that coalition institutions matter for property-rights...

PDB2Graph: A toolbox for identifying critical amino acids map in proteins based on graph theory.

Science.gov (United States)

Niknam, Niloofar; Khakzad, Hamed; Arab, Seyed Shahriar; Naderi-Manesh, Hossein

2016-05-01

The integrative and cooperative nature of protein structure involves the assessment of topological and global features of constituent parts. Network concept takes complete advantage of both of these properties in the analysis concomitantly. High compatibility to structural concepts or physicochemical properties in addition to exploiting a remarkable simplification in the system has made network an ideal tool to explore biological systems. There are numerous examples in which different protein structural and functional characteristics have been clarified by the network approach. Here, we present an interactive and user-friendly Matlab-based toolbox, PDB2Graph, devoted to protein structure network construction, visualization, and analysis. Moreover, PDB2Graph is an appropriate tool for identifying critical nodes involved in protein structural robustness and function based on centrality indices. It maps critical amino acids in protein networks and can greatly aid structural biologists in selecting proper amino acid candidates for manipulating protein structures in a more reasonable and rational manner. To introduce the capability and efficiency of PDB2Graph in detail, the structural modification of Calmodulin through allosteric binding of Ca(2+) is considered. In addition, a mutational analysis for three well-identified model proteins including Phage T4 lysozyme, Barnase and Ribonuclease HI, was performed to inspect the influence of mutating important central residues on protein activity. Copyright © 2016 Elsevier Ltd. All rights reserved.

Path innovation of rural property mortgage financing in China

OpenAIRE

Wu Yongchao

2016-01-01

Rural property mortgage financing, as an important breakthrough to deepen the reform of rural property right system and financial system, is an important approach to increase the farmers’ property income. Besides, rural property mortgage financing is of great significance in implementing the rural land usufructuary right and meeting the demand of medium-and-long-term and large-scale operation of the funds used in agricultural production. Under the existing institutional arrangement, the prope...

Machine Learning Analysis Identifies Drosophila Grunge/Atrophin as an Important Learning and Memory Gene Required for Memory Retention and Social Learning.

Science.gov (United States)

Kacsoh, Balint Z; Greene, Casey S; Bosco, Giovanni

2017-11-06

High-throughput experiments are becoming increasingly common, and scientists must balance hypothesis-driven experiments with genome-wide data acquisition. We sought to predict novel genes involved in Drosophila learning and long-term memory from existing public high-throughput data. We performed an analysis using PILGRM, which analyzes public gene expression compendia using machine learning. We evaluated the top prediction alongside genes involved in learning and memory in IMP, an interface for functional relationship networks. We identified Grunge/Atrophin ( Gug/Atro ), a transcriptional repressor, histone deacetylase, as our top candidate. We find, through multiple, distinct assays, that Gug has an active role as a modulator of memory retention in the fly and its function is required in the adult mushroom body. Depletion of Gug specifically in neurons of the adult mushroom body, after cell division and neuronal development is complete, suggests that Gug function is important for memory retention through regulation of neuronal activity, and not by altering neurodevelopment. Our study provides a previously uncharacterized role for Gug as a possible regulator of neuronal plasticity at the interface of memory retention and memory extinction. Copyright © 2017 Kacsoh et al.

Leading change: 1--identifying the issue.

Science.gov (United States)

Kerridge, Joanna

To enable sustainable change, nurses need to take the lead in managing it. Recent national initiatives have emphasised the importance of frontline staff in service improvement. The ability to influence and manage change has been identified as an essential skill for delivering new models of care. This article is the first in a three-part series designed to help nurses at all levels develop the knowledge and skills they will need to initiate and manage change. This article focuses on identifying what needs to be changed and why.

Imports/exports issues and options : discussion paper

International Nuclear Information System (INIS)

2001-01-01

The Alberta marketplace is ideally located for connections to British Columbia, the Pacific Northwest, Saskatchewan, Manitoba and the Mid-Continental Area Power Pool (MAPP). Alignment with other markets becomes an important issue and provides challenges that must be overcome. It provides an opportunity for expanded trade in Alberta based loads and generation. The Real Time (RT) market for the trading of physical, dispatchable energy and the forwards markets (financial and intended to go to delivery through the RT market) are comprised in the Alberta marketplace. The development of a complete marketplace for electricity is fully supported by the Power Poll of Alberta. Developments in those two markets allow greater opportunity for a review of the interconnections in the Alberta electricity market. In this document, an attempt is made to identify issues relating to the imports and exports and develop alternative mechanisms to resolve these issues. Three main objectives were put forth: identify a better mechanism to meet the requirements of the Pool Price Deficiency Regulation (PPDR), identify a better mechanism to allow imports and exports to participate in the Alberta market that takes into consideration the impact of transmission constraints, and to better align with external markets. An hour ahead firm market for interconnections was one option that addresses the issues under consideration

Path innovation of rural property mortgage financing in China

Directory of Open Access Journals (Sweden)

Wu Yongchao

2016-01-01

Full Text Available Rural property mortgage financing, as an important breakthrough to deepen the reform of rural property right system and financial system, is an important approach to increase the farmers’ property income. Besides, rural property mortgage financing is of great significance in implementing the rural land usufructuary right and meeting the demand of medium-and-long-term and large-scale operation of the funds used in agricultural production. Under the existing institutional arrangement, the property mortgage financing in the rural areas of our country still is faced with many obstacles, and it is still at the stage of low level development. In this paper, closely based on the acceptability and the difficulty in the mortgaged property involving in legal disposal, the author puts forward important methods: clearly define the ownership, unify the urban and rural markets, increase the participation enthusiasm of financing bodies, and improve the supporting policies to promote property mortgage financing in rural area. Finally, the government should give farmers more property rights and revitalize the usufructuary right of agricultural land and its derivative right.

Testing properties of generic functions

NARCIS (Netherlands)

Jansson, P.; Jeuring, J.T.; Cabenda, L.; Engels, G.; Kleerekoper, J.; Mak, S.; Overeem, M.; Visser, Kees

2006-01-01

Software testing is an important part of the software devel- opment process. Testing comes in many flavours: unit testing, property testing, regression testing, contract checking, etc. QuickCheck is proba- bly one of the most advanced tools for testing properties of functional programs. It

SPARQL-enabled identifier conversion with Identifiers.org.

Science.gov (United States)

Wimalaratne, Sarala M; Bolleman, Jerven; Juty, Nick; Katayama, Toshiaki; Dumontier, Michel; Redaschi, Nicole; Le Novère, Nicolas; Hermjakob, Henning; Laibe, Camille

2015-06-01

On the semantic web, in life sciences in particular, data is often distributed via multiple resources. Each of these sources is likely to use their own International Resource Identifier for conceptually the same resource or database record. The lack of correspondence between identifiers introduces a barrier when executing federated SPARQL queries across life science data. We introduce a novel SPARQL-based service to enable on-the-fly integration of life science data. This service uses the identifier patterns defined in the Identifiers.org Registry to generate a plurality of identifier variants, which can then be used to match source identifiers with target identifiers. We demonstrate the utility of this identifier integration approach by answering queries across major producers of life science Linked Data. The SPARQL-based identifier conversion service is available without restriction at http://identifiers.org/services/sparql. © The Author 2015. Published by Oxford University Press.

SPARQL-enabled identifier conversion with Identifiers.org

Science.gov (United States)

Wimalaratne, Sarala M.; Bolleman, Jerven; Juty, Nick; Katayama, Toshiaki; Dumontier, Michel; Redaschi, Nicole; Le Novère, Nicolas; Hermjakob, Henning; Laibe, Camille

2015-01-01

Motivation: On the semantic web, in life sciences in particular, data is often distributed via multiple resources. Each of these sources is likely to use their own International Resource Identifier for conceptually the same resource or database record. The lack of correspondence between identifiers introduces a barrier when executing federated SPARQL queries across life science data. Results: We introduce a novel SPARQL-based service to enable on-the-fly integration of life science data. This service uses the identifier patterns defined in the Identifiers.org Registry to generate a plurality of identifier variants, which can then be used to match source identifiers with target identifiers. We demonstrate the utility of this identifier integration approach by answering queries across major producers of life science Linked Data. Availability and implementation: The SPARQL-based identifier conversion service is available without restriction at http://identifiers.org/services/sparql. Contact: sarala@ebi.ac.uk PMID:25638809

Sign and magnitude scaling properties of heart rate variability in patients with end-stage renal failure: Are these properties useful to identify pathophysiological adaptations?

Science.gov (United States)

Lerma, Claudia; Echeverría, Juan C.; Infante, Oscar; Pérez-Grovas, Héctor; González-Gómez, Hortensia

2017-09-01

The scaling properties of heart rate variability data are reliable dynamical features to predict mortality and for the assessment of cardiovascular risk. The aim of this manuscript was to determine if the scaling properties, as provided by the sign and magnitude analysis, can be used to differentiate between pathological changes and those adaptations basically introduced by modifications of the mean heart rate in distinct manoeuvres (active standing or hemodialysis treatment, HD), as well as clinical conditions (end stage renal disease, ESRD). We found that in response to active standing, the short-term scaling index (α1) increased in healthy subjects and in ESRD patients only after HD. The sign short-term scaling exponent (α1sign) increased in healthy subjects and ESRD patients, showing a less anticorrelated behavior in active standing. Both α1 and α1sign did show covariance with the mean heart rate in healthy subjects, while in ESRD patients, this covariance was observed only after HD. A reliable estimation of the magnitude short-term scaling exponent (α1magn) required the analysis of time series with a large number of samples (>3000 data points). This exponent was similar for both groups and conditions and did not show covariance with the mean heart rate. A surrogate analysis confirmed the presence of multifractal properties (α1magn > 0.5) in the time series of healthy subjects and ESDR patients. In conclusion, α1 and α1sign provided insights into the physiological adaptations during active standing, which revealed a transitory impairment before HD in ESRD patients. The presence of multifractal properties indicated that a reduced short-term variability does not necessarily imply a declined regulatory complexity in these patients.

Use of computed tomography to identify atrial fibrillation associated differences in left atrial wall thickness and density.

Science.gov (United States)

Dewland, Thomas A; Wintermark, Max; Vaysman, Anna; Smith, Lisa M; Tong, Elizabeth; Vittinghoff, Eric; Marcus, Gregory M

2013-01-01

Left atrial (LA) tissue characteristics may play an important role in atrial fibrillation (AF) induction and perpetuation. Although frequently used in clinical practice, computed tomography (CT) has not been employed to describe differences in LA wall properties between AF patients and controls. We sought to noninvasively characterize AF-associated differences in LA tissue using CT. CT images of the LA were obtained in 98 consecutive patients undergoing AF ablation and in 89 controls. A custom software algorithm was used to measure wall thickness and density in four prespecified regions of the LA. On average, LA walls were thinner (-15.5%, 95% confidence interval [CI] -23.2 to -7.8%, P identified significant thinning of the LA wall and regional alterations in tissue density in patients with a history of AF. These findings suggest differences in LA tissue composition can be noninvasively identified and quantified using CT. ©2012, The Authors. Journal compilation ©2012 Wiley Periodicals, Inc.

Effect of Uncertainties in CO2 Property Databases on the S-CO2 Compressor Performance

International Nuclear Information System (INIS)

Lee, Je Kyoung; Lee, Jeong Ik; Ahn, Yoonhan; Kim, Seong Gu; Cha, Je Eun

2013-01-01

Various S-CO 2 Brayton cycle experiment facilities are on the state of construction or operation for demonstration of the technology. However, during the data analysis, S-CO 2 property databases are widely used to predict the performance and characteristics of S-CO 2 Brayton cycle. Thus, a reliable property database is very important before any experiment data analyses or calculation. In this paper, deviation of two different property databases which are widely used for the data analysis will be identified by using three selected properties for comparison, C p , density and enthalpy. Furthermore, effect of above mentioned deviation on the analysis of test data will be briefly discussed. From this deviation, results of the test data analysis can have critical error. As the S-CO 2 Brayton cycle researcher knows, CO 2 near the critical point has dramatic change on thermodynamic properties. Thus, it is true that a potential error source of property prediction exists in CO 2 properties near the critical point. During an experiment data analysis with the S-CO 2 Brayton cycle experiment facility, thermodynamic properties are always involved to predict the component performance and characteristics. Thus, construction or defining of precise CO 2 property database should be carried out to develop Korean S-CO 2 Brayton cycle technology

Thermophysical properties

Energy Technology Data Exchange (ETDEWEB)

Kayser, R.F.

1993-01-01

Numerous fluids have been identified as promising alternative refrigerants, but much of the information needed to predict their behavior as pure fluids and as components in mixtures does not exist. In particular, reliable thermophysical properties data and models are needed to predict the performance of the new refrigerants in heating and cooling equipment and to design and optimize equipment to be reliable and energy efficient. The objective of this project is to provide highly accurate, selected thermophysical properties data for Refrigerants 32, 123, 124, and 125, and to use these data to fit simple and complex equations of state and detailed transport property models. The new data will fill gaps in the existing data sets and resolve the problems and uncertainties that exist in and between the data sets. This report describes the progress made during the fourth quarter of this fifteen-month project, which was initiated in late January, 1992.

The importance of nuclear quantum effects in spectral line broadening of optical spectra and electrostatic properties in aromatic chromophores

Science.gov (United States)

Law, Y. K.; Hassanali, A. A.

2018-03-01

In this work, we examine the importance of nuclear quantum effects on capturing the line broadening and vibronic structure of optical spectra. We determine the absorption spectra of three aromatic molecules indole, pyridine, and benzene using time dependent density functional theory with several molecular dynamics sampling protocols: force-field based empirical potentials, ab initio simulations, and finally path-integrals for the inclusion of nuclear quantum effects. We show that the absorption spectrum for all these chromophores are similarly broadened in the presence of nuclear quantum effects regardless of the presence of hydrogen bond donor or acceptor groups. We also show that simulations incorporating nuclear quantum effects are able to reproduce the heterogeneous broadening of the absorption spectra even with empirical force fields. The spectral broadening associated with nuclear quantum effects can be accounted for by the broadened distribution of chromophore size as revealed by a particle in the box model. We also highlight the role that nuclear quantum effects have on the underlying electronic structure of aromatic molecules as probed by various electrostatic properties.

How important are scaffolds and their surface properties in regenerative medicine

Energy Technology Data Exchange (ETDEWEB)

Idaszek, J.; Kijeńska, E.; Łojkowski, M.; Swieszkowski, W., E-mail: wojciech.swieszkowski@inmat.pw.edu.pl

2016-12-01

Highlights: • Cell performance on AM scaffolds can be controlled by modification of surface chemistry as well as their architecture. • Introduction of chemical groups/particles increasing surface wettability and surface energy has a positive effect on cell retention and adhesion. • The properties of nanofiber scaffold like fibers orientation, wettability, roughness and chemical composition direct spreading, proliferation, maturation and differentiation of the cells promoting tissue re-growth. - Abstract: The ability of cells to sense various cues present within their natural habitat gives a tremendous opportunity to steer their fate in vitro within artificial matrices (scaffolds). However, the variety of signals and their chemical and physical origin makes engineering of the scaffolds quite challenging and requires careful design in order to obtained the desired outcome. Herein, we discuss the effect of architecture and surface of scaffolds fabricated by means of additive manufacturing and electrospinning on cell retention, spreading, proliferation and differentiation. Additionally, we present some of the reported surface and bulk modifications of the scaffolds, which positively affected cell performance. Finally, in the last part we discuss application of multicellular spheroids as a useful tool to study cell performance within three-dimensional and porous structures.

How important are scaffolds and their surface properties in regenerative medicine

International Nuclear Information System (INIS)

Idaszek, J.; Kijeńska, E.; Łojkowski, M.; Swieszkowski, W.

2016-01-01

Highlights: • Cell performance on AM scaffolds can be controlled by modification of surface chemistry as well as their architecture. • Introduction of chemical groups/particles increasing surface wettability and surface energy has a positive effect on cell retention and adhesion. • The properties of nanofiber scaffold like fibers orientation, wettability, roughness and chemical composition direct spreading, proliferation, maturation and differentiation of the cells promoting tissue re-growth. - Abstract: The ability of cells to sense various cues present within their natural habitat gives a tremendous opportunity to steer their fate in vitro within artificial matrices (scaffolds). However, the variety of signals and their chemical and physical origin makes engineering of the scaffolds quite challenging and requires careful design in order to obtained the desired outcome. Herein, we discuss the effect of architecture and surface of scaffolds fabricated by means of additive manufacturing and electrospinning on cell retention, spreading, proliferation and differentiation. Additionally, we present some of the reported surface and bulk modifications of the scaffolds, which positively affected cell performance. Finally, in the last part we discuss application of multicellular spheroids as a useful tool to study cell performance within three-dimensional and porous structures.

Using a 2D detector array for meaningful and efficient linear accelerator beam property validations.

Science.gov (United States)

Ritter, Timothy A; Gallagher, Ian; Roberson, Peter L

2014-11-08

Following linear accelerator commissioning, the qualified medical physicist is responsible for monitoring the machine's ongoing performance, detecting and investigating any changes in beam properties, and assessing the impact of unscheduled repairs. In support of these responsibilities, the authors developed a method of using a 2D ionization chamber array to efficiently test and validate important linear accelerator photon beam properties. A team of three physicists identified critical properties of the accelerator and developed constancy tests that were sensitive to each of the properties. The result was a 14-field test plan. The test plan includes large and small fields at varying depths, a reduced SSD field at shallow depth for sensitivity to extra focal photon and electron components, and analysis of flatness, symmetry, dose, dose profiles, and dose ratios. Constancy tests were repeated five times over a period of six weeks and used to set upper and lower investigation levels at ± 3 SDs. Deliberate variations in output, penumbra, and energy were tested to determine the suitability of the proposed method. Measurements were also performed on a similar, but distinct, machine to assess test sensitivity. The results demonstrated upper and lower investigation levels significantly smaller than the comparable TG-142 annual recommendations, with the exception of the surrogate used for output calibration, which still fell within the TG-142 monthly recommendation. Subtle changes in output, beam energy, and penumbra were swiftly identified for further investigation. The test set identified the distinct nature of the second accelerator. The beam properties of two photon energies can be validated in approximately 1.5 hrs using this method. The test suite can be used to evaluate the impact of minor repairs, detect changes in machine performance over time, and supplement other machine quality assurance testing.

Linking the Salt Transcriptome with Physiological Responses of a Salt-Resistant Populus Species as a Strategy to Identify Genes Important for Stress Acclimation1[W][OA

Science.gov (United States)

Brinker, Monika; Brosché, Mikael; Vinocur, Basia; Abo-Ogiala, Atef; Fayyaz, Payam; Janz, Dennis; Ottow, Eric A.; Cullmann, Andreas D.; Saborowski, Joachim; Kangasjärvi, Jaakko; Altman, Arie; Polle, Andrea

2010-01-01

To investigate early salt acclimation mechanisms in a salt-tolerant poplar species (Populus euphratica), the kinetics of molecular, metabolic, and physiological changes during a 24-h salt exposure were measured. Three distinct phases of salt stress were identified by analyses of the osmotic pressure and the shoot water potential: dehydration, salt accumulation, and osmotic restoration associated with ionic stress. The duration and intensity of these phases differed between leaves and roots. Transcriptome analysis using P. euphratica-specific microarrays revealed clusters of coexpressed genes in these phases, with only 3% overlapping salt-responsive genes in leaves and roots. Acclimation of cellular metabolism to high salt concentrations involved remodeling of amino acid and protein biosynthesis and increased expression of molecular chaperones (dehydrins, osmotin). Leaves suffered initially from dehydration, which resulted in changes in transcript levels of mitochondrial and photosynthetic genes, indicating adjustment of energy metabolism. Initially, decreases in stress-related genes were found, whereas increases occurred only when leaves had restored the osmotic balance by salt accumulation. Comparative in silico analysis of the poplar stress regulon with Arabidopsis (Arabidopsis thaliana) orthologs was used as a strategy to reduce the number of candidate genes for functional analysis. Analysis of Arabidopsis knockout lines identified a lipocalin-like gene (AtTIL) and a gene encoding a protein with previously unknown functions (AtSIS) to play roles in salt tolerance. In conclusion, by dissecting the stress transcriptome of tolerant species, novel genes important for salt endurance can be identified. PMID:20959419

The importance of the biomimetic composites components for recreating the optical properties and molecular composition of intact dental tissues.

Science.gov (United States)

Seredin, P. V.; Goloshchapov, D. L.; Gushchin, M. S.; Ippolitov, Y. A.; Prutskij, T.

2017-11-01

The objective of this paper was to investigate whether it is possible to obtain biomimetic materials recreating the luminescent properties and molecular composition of intact dental tissues. Biomimetic materials were produced and their properties compared with native dental tissues. In addition, the overall contribution of the organic and non-organic components in the photoluminescence band was investigated. The results showed that it is possible to develop biomimetic materials with similar molecular composition and optical properties to native dental tissues for the early identification of dental caries.

CORRELATION ANALYSIS OF A LARGE SAMPLE OF NARROW-LINE SEYFERT 1 GALAXIES: LINKING CENTRAL ENGINE AND HOST PROPERTIES

International Nuclear Information System (INIS)

Xu Dawei; Komossa, S.; Wang Jing; Yuan Weimin; Zhou Hongyan; Lu Honglin; Li Cheng; Grupe, Dirk

2012-01-01

We present a statistical study of a large, homogeneously analyzed sample of narrow-line Seyfert 1 (NLS1) galaxies, accompanied by a comparison sample of broad-line Seyfert 1 (BLS1) galaxies. Optical emission-line and continuum properties are subjected to correlation analyses, in order to identify the main drivers of the correlation space of active galactic nuclei (AGNs), and of NLS1 galaxies in particular. For the first time, we have established the density of the narrow-line region as a key parameter in Eigenvector 1 space, as important as the Eddington ratio L/L Edd . This is important because it links the properties of the central engine with the properties of the host galaxy, i.e., the interstellar medium (ISM). We also confirm previously found correlations involving the line width of Hβ and the strength of the Fe II and [O III] λ5007 emission lines, and we confirm the important role played by L/L Edd in driving the properties of NLS1 galaxies. A spatial correlation analysis shows that large-scale environments of the BLS1 and NLS1 galaxies of our sample are similar. If mergers are rare in our sample, accretion-driven winds, on the one hand, or bar-driven inflows, on the other hand, may account for the strong dependence of Eigenvector 1 on ISM density.

Importance measures for use in PRAs and risk management

International Nuclear Information System (INIS)

Schmidt, E.R.; Jamali, K.M.; Parry, G.W.; Gibbon, S.H.

1985-01-01

There are many quantities estimated in probabilistic risk assessments (PRAs) to index the level of plant safety. If the PRA is to be used as a risk management tool to assist in the safe operation of the plant, it is essential that those elements of the plant design and its mode of operation that have the greatest impact on plant safety be identified. These elements may be identified by performing importance calculations. There are certain decisions that must be made before the importance calculation is carried out. The first is the definition of the events for which importance is to be evaluated; that is, to what level of resolution the analysis is to be performed. The second decision that must be made--and the major subject of this paper--is the choice of importance measure. Many measures of importance have been proposed; this discussion is restricted to three: the risk achievement (or degradation) worth, the risk reduction worth, and criticality importance. In the paper these measures of importance are defined, their interrelationships are discussed, and a generalized importance measure is introduced. The use of these three measures is compared and their advantages and disadvantages are discussed

Modeling of microstructure property relationships in titanium-aluminum-vanadium

Science.gov (United States)

Tiley, Jaimie Scott

Fuzzy logic neural network models were developed to predict the room temperature tensile behavior of Ti-6Al-4V. This involved the development of a database relating microstructure to properties. This necessitated establishing heat treatment processes to develop microstructural features, mechanical testing of samples, creating rigorous stereology procedures, developing numerical models to predict mechanical behavior, and determining trends and inter-relationships relating microstructural features to mechanical properties. Microstructural features were developed using a Gleeble(TM) 1500 Thermal-mechanical simulator. Samples were obtained from mill annealed plate material and both alpha + beta forged and beta forged materials. A total of 72 samples were beta solutionized and heat treated using different heating and cooling conditions. Rigorous stereology procedures were developed to characterize the important microstructural features. The features included Widmanstatten alpha lath thickness, volume fraction of total alpha, volume fraction of Widmanstatten alpha, grain boundary alpha thickness, mean edge length, colony scale factor, and prior beta grain size factor. Chemical composition was also determined using standard chemical analysis and microscopy techniques. The samples were tested for yield strength, ultimate tensile strength, and elongation at room temperature. Results from the tests and the characterization were used to develop fuzzy logic neural network models to predict the mechanical behaviors and develop relationships between the microstructural features (using CubiCalc RTC(TM)). Results were compared to standard multi-variable regression models. The fuzzy logic neural network models were able to predict the yield, and ultimate tensile strength, within acceptable error ranges with a limited number of input data samples. The models also predicted the elongation values but with larger errors. Of particular importance, the models identified the importance of

smRNAome profiling to identify conserved and novel microRNAs in Stevia rebaudiana Bertoni

Science.gov (United States)

2012-01-01

Background MicroRNAs (miRNAs) constitute a family of small RNA (sRNA) population that regulates the gene expression and plays an important role in plant development, metabolism, signal transduction and stress response. Extensive studies on miRNAs have been performed in different plants such as Arabidopsis thaliana, Oryza sativa etc. and volume of the miRNA database, mirBASE, has been increasing on day to day basis. Stevia rebaudiana Bertoni is an important perennial herb which accumulates high concentrations of diterpene steviol glycosides which contributes to its high indexed sweetening property with no calorific value. Several studies have been carried out for understanding molecular mechanism involved in biosynthesis of these glycosides, however, information about miRNAs has been lacking in S. rebaudiana. Deep sequencing of small RNAs combined with transcriptomic data is a powerful tool for identifying conserved and novel miRNAs irrespective of availability of genome sequence data. Results To identify miRNAs in S. rebaudiana, sRNA library was constructed and sequenced using Illumina genome analyzer II. A total of 30,472,534 reads representing 2,509,190 distinct sequences were obtained from sRNA library. Based on sequence similarity, we identified 100 miRNAs belonging to 34 highly conserved families. Also, we identified 12 novel miRNAs whose precursors were potentially generated from stevia EST and nucleotide sequences. All novel sequences have not been earlier described in other plant species. Putative target genes were predicted for most conserved and novel miRNAs. The predicted targets are mainly mRNA encoding enzymes regulating essential plant metabolic and signaling pathways. Conclusions This study led to the identification of 34 highly conserved miRNA families and 12 novel potential miRNAs indicating that specific miRNAs exist in stevia species. Our results provided information on stevia miRNAs and their targets building a foundation for future studies to

Investigation of some properties of Nylon-6 surface treated by corona discharge in helium

International Nuclear Information System (INIS)

Dumitrascu, N.; Surdu, S.; Popa, Gh.; Raileanu, D.

1996-01-01

In this work an easy and less expensive method of treatment has been used by corona discharge. This allows to modify the surface properties and especially to improve the compatibility of polymers with biological tissue. The Nylon-6 as a test material was chosen. A scanning electron microscope to visualize the morphology of the morphology of the surface and an IR spectrophotometer able to identify the amide groups and other as well, have been used. Morphology of the treated surface by corona discharge emphasis an etching an etching and/or a crosslinking of amorphous domains, generally important to improve the properties as wetting, dyeing, adhesion, etc. Over all treated surface there is significant blood compatible properties without the need of heparinization of surface. The treated surface influences the biological behaviour of micro-organisms, respectively, that surface is a favourable medium for division of cells and may increase their lifetime. (authors)

Identifying the community structure of the food-trade international multi-network

Science.gov (United States)

Torreggiani, S.; Mangioni, G.; Puma, M. J.; Fagiolo, G.

2018-05-01

Achieving international food security requires improved understanding of how international trade networks connect countries around the world through the import-export flows of food commodities. The properties of international food trade networks are still poorly documented, especially from a multi-network perspective. In particular, nothing is known about the multi-network’s community structure. Here we find that the individual crop-specific layers of the multi-network have densely connected trading groups, a consistent characteristic over the period 2001–2011. Further, the multi-network is characterized by low variability over this period but with substantial heterogeneity across layers in each year. In particular, the layers are mostly assortative: more-intensively connected countries tend to import from and export to countries that are themselves more connected. We also fit econometric models to identify social, economic and geographic factors explaining the probability that any two countries are co-present in the same community. Our estimates indicate that the probability of country pairs belonging to the same food trade community depends more on geopolitical and economic factors—such as geographical proximity and trade-agreement co-membership—than on country economic size and/or income. These community-structure findings of the multi-network are especially valuable for efforts to understand past and emerging dynamics in the global food system, especially those that examine potential ‘shocks’ to global food trade.

Importance of non-parabolic band effects in the thermoelectric properties of semiconductors

Science.gov (United States)

Chen, Xin; Parker, David; Singh, David J.

2013-01-01

We present an analysis of the thermoelectric properties of of n-type GeTe and SnTe in relation to the lead chalcogenides PbTe and PbSe. We find that the singly degenerate conduction bands of semiconducting GeTe and SnTe are highly non-ellipsoidal, even very close to the band edges. This leads to isoenergy surfaces with a strongly corrugated shape that is clearly evident at carrier concentrations well below 0.005 e per formula unit (7–9 × 1019 cm−3 depending on material). Analysis within Boltzmann theory suggests that this corrugation may be favorable for the thermoelectric transport. Our calculations also indicate that values of the power factor for these two materials may well exceed those of PbTe and PbSe. As a result these materials may exhibit n-type performance exceeding that of the lead chalcogenides. PMID:24196778

ORCID: Author Identifiers for Librarians

Directory of Open Access Journals (Sweden)

Robyn B. Reed

2017-10-01

Full Text Available Generating accurate publication lists by researchers can be challenging when faced with scholars who have common names or who have published under name variations. This article describes ORCID and the goal of generating author identifiers for scholars to connect their research outputs. Included are the reasons for having author identifiers as well as the types of information within individual profiles. This article includes information on how academic libraries are playing a role with ORCID initiatives as well as describing how publishers, institutions, and funders are employing ORCID in their workflows. Highlighted is material on academic institutions in Pennsylvania using ORCID. The purpose of the article is to provide an overview of ORCID and its uses to inform librarians about this important initiative.

On The Importance of Connecting Laboratory Measurements of Ice Crystal Growth with Model Parameterizations: Predicting Ice Particle Properties

Science.gov (United States)

Harrington, J. Y.

2017-12-01

Parameterizing the growth of ice particles in numerical models is at an interesting cross-roads. Most parameterizations developed in the past, including some that I have developed, parse model ice into numerous categories based primarily on the growth mode of the particle. Models routinely possess smaller ice, snow crystals, aggregates, graupel, and hail. The snow and ice categories in some models are further split into subcategories to account for the various shapes of ice. There has been a relatively recent shift towards a new class of microphysical models that predict the properties of ice particles instead of using multiple categories and subcategories. Particle property models predict the physical characteristics of ice, such as aspect ratio, maximum dimension, effective density, rime density, effective area, and so forth. These models are attractive in the sense that particle characteristics evolve naturally in time and space without the need for numerous (and somewhat artificial) transitions among pre-defined classes. However, particle property models often require fundamental parameters that are typically derived from laboratory measurements. For instance, the evolution of particle shape during vapor depositional growth requires knowledge of the growth efficiencies for the various axis of the crystals, which in turn depends on surface parameters that can only be determined in the laboratory. The evolution of particle shapes and density during riming, aggregation, and melting require data on the redistribution of mass across a crystals axis as that crystal collects water drops, ice crystals, or melts. Predicting the evolution of particle properties based on laboratory-determined parameters has a substantial influence on the evolution of some cloud systems. Radiatively-driven cirrus clouds show a broader range of competition between heterogeneous nucleation and homogeneous freezing when ice crystal properties are predicted. Even strongly convective squall

Formal consensus to identify clinically important changes in management resulting from the use of cardiovascular magnetic resonance (CMR) in patients who activate the primary percutaneous coronary intervention (PPCI) pathway.

Science.gov (United States)

Pufulete, Maria; Brierley, Rachel C; Bucciarelli-Ducci, Chiara; Greenwood, John P; Dorman, Stephen; Anderson, Richard A; Harris, Jessica; McAlindon, Elisa; Rogers, Chris A; Reeves, Barnaby C

2017-06-22

To define important changes in management arising from the use of cardiovascular magnetic resonance (CMR) in patients who activate the primary percutaneous coronary intervention (PPCI) pathway. Formal consensus study using literature review and cardiologist expert opinion to formulate consensus statements and setting up a consensus panel to review the statements (by completing a web-based survey, attending a face-to-face meeting to discuss survey results and modify the survey to reflect group discussion and completing the modified survey to determine which statements were in consensus). Formulation of consensus statements: four cardiologists (two CMR and two interventional) and six non-clinical researchers. Formal consensus: seven cardiologists (two CMR and three interventional, one echocardiography and one heart failure). Forty-nine additional cardiologists completed the modified survey. Thirty-seven draft statements describing changes in management following CMR were generated; these were condensed into 12 statements and reviewed through the formal consensus process. Three of 12 statements were classified in consensus in the first survey; these related to the role of CMR in identifying the cause of out-of-hospital cardiac arrest, providing a definitive diagnosis in patients found to have unobstructed arteries on angiography and identifying patients with left ventricular thrombus. Two additional statements were in consensus in the modified survey, relating to the ability of CMR to identify patients who have a poor prognosis after PPCI and assess ischaemia and viability in patients with multivessel disease. There was consensus that CMR leads to clinically important changes in management in five subgroups of patients who activate the PPCI pathway. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Optical adhesive property study

Energy Technology Data Exchange (ETDEWEB)

Sundvold, P.D.

1996-01-01

Tests were performed to characterize the mechanical and thermal properties of selected optical adhesives to identify the most likely candidate which could survive the operating environment of the Direct Optical Initiation (DOI) program. The DOI system consists of a high power laser and an optical module used to split the beam into a number of channels to initiate the system. The DOI requirements are for a high shock environment which current military optical systems do not operate. Five candidate adhesives were selected and evaluated using standardized test methods to determine the adhesives` physical properties. EC2216, manufactured by 3M, was selected as the baseline candidate adhesive based on the test results of the physical properties.

The behavioural characteristics of sediment properties and their implications for sediment fingerprinting as an approach for identifying sediment sources in river basins

Science.gov (United States)

Koiter, A. J.; Owens, P. N.; Petticrew, E. L.; Lobb, D. A.

2013-10-01

Sediment fingerprinting is a technique that is increasingly being used to improve the understanding of sediment dynamics within river basins. At present, one of the main limitations of the technique is the ability to link sediment back to their sources due to the non-conservative nature of many of the sediment properties. The processes that occur between the sediment source locations and the point of collection downstream are not well understood or quantified and currently represent a black-box in the sediment fingerprinting approach. The literature on sediment fingerprinting tends to assume that there is a direct connection between sources and sinks, while much of the broader environmental sedimentology literature identifies that numerous chemical, biological and physical transformations and alterations can occur as sediment moves through the landscape. The focus of this paper is on the processes that drive particle size and organic matter selectivity and biological, geochemical and physical transformations and how understanding these processes can be used to guide sampling protocols, fingerprint selection and data interpretation. The application of statistical approaches without consideration of how unique sediment fingerprints have developed and how robust they are within the environment is a major limitation of many recent studies. This review summarises the current information, identifies areas that need further investigation and provides recommendations for sediment fingerprinting that should be considered for adoption in future studies if the full potential and utility of the approach are to be realised.

Identifying Social Trust in Cross-Country Analysis: Do We Really Measure the Same?

Science.gov (United States)

Torpe, Lars; Lolle, Henrik

2011-01-01

Many see trust as an important social resource for the welfare of individuals as well as nations. It is therefore important to be able to identify trust and explain its sources. Cross-country survey analysis has been an important tool in this respect, and often one single variable is used to identify social trust understood as trust in strangers,…

Identifying and designing chemicals with minimal acute aquatic toxicity.

Science.gov (United States)

Kostal, Jakub; Voutchkova-Kostal, Adelina; Anastas, Paul T; Zimmerman, Julie Beth

2015-05-19

Industrial ecology has revolutionized our understanding of material stocks and flows in our economy and society. For this important discipline to have even deeper impact, we must understand the inherent nature of these materials in terms of human health and the environment. This paper focuses on methods to design synthetic chemicals to reduce their intrinsic ability to cause adverse consequence to the biosphere. Advances in the fields of computational chemistry and molecular toxicology in recent decades allow the development of predictive models that inform the design of molecules with reduced potential to be toxic to humans or the environment. The approach presented herein builds on the important work in quantitative structure-activity relationships by linking toxicological and chemical mechanistic insights to the identification of critical physical-chemical properties needed to be modified. This in silico approach yields design guidelines using boundary values for physiochemical properties. Acute aquatic toxicity serves as a model endpoint in this study. Defining value ranges for properties related to bioavailability and reactivity eliminates 99% of the chemicals in the highest concern for acute aquatic toxicity category. This approach and its future implementations are expected to yield very powerful tools for life cycle assessment practitioners and molecular designers that allow rapid assessment of multiple environmental and human health endpoints and inform modifications to minimize hazard.

The relationship of whole human vertebral body creep to geometric, microstructural, and material properties.

Science.gov (United States)

Oravec, Daniel; Kim, Woong; Flynn, Michael J; Yeni, Yener N

2018-05-17

Creep, the time dependent deformation of a structure under load, is an important viscoelastic property of bone and may play a role in the development of permanent deformity of the vertebrae in vivo leading to clinically observable spinal fractures. To date, creep properties and their relationship to geometric, microstructural, and material properties have not been described in isolated human vertebral bodies. In this study, a range of image-based measures of vertebral bone geometry, bone mass, microarchitecture and mineralization were examined in multiple regression models in an effort to understand their contribution to creep behavior. Several variables, such as measures of mineralization heterogeneity, average bone density, and connectivity density persistently appeared as significant effects in multiple regression models (adjusted r 2 : 0.17-0.56). Although further work is needed to identify additional tissue properties to fully describe the portion of variability not explained by these models, these data are expected to help understand mechanisms underlying creep and improve prediction of vertebral deformities that eventually progress to a clinically observable fracture. Copyright © 2018 Elsevier Ltd. All rights reserved.

History of an Issue – Property

OpenAIRE

Niadi-Corina CERNICA,

2012-01-01

Property becomes a issue of philosophy and political reflections owing to Platon`s “Republic”. In this dialogue, the military class of his political Utopia is obliged not to possess goods. So that the Republic is more important than their interests. For this reason the military class is obliged not to have family. The interest of Republic is more important than the individual interests. David Hume thinks the right comes from the property (the two concepts have developed correspondingly). P...

Landscape architecture as an entity of property development in Wilayah Persekutuan, Putrajaya

Directory of Open Access Journals (Sweden)

Ahmad Nasyution bin Abdul Razak

2015-12-01

Full Text Available This study explores the relationship between landscape architecture and property development. Landscape architecture emphasizes the nature of conservation, development of public parks, city parks, local parks, artificial forests, lakes, recreational areas, outdoor recreation centers, open space systems and other components of landscape architecture in providing opportunities and benefits for real estate development. Backed by ample literature review, this study reveals the significant relationship between land, real estate and landscape architecture. Landscape architecture which provides an open park and green space can be expanded to benefit the social, environment and economy through optimal used of space in property development project. Hence, this study discusses the objectives which are to determine significant factors in the development of landscape architecture, to identify the importance of landscape architecture in real estate development, and to assess the relationship between landscape architecture and property development land. This study involved 50 respondents from renowned developers; Putrajaya Holdings Sdn Bhd (PJH, Selangor State Development Corporation (PKNS, the local authority; Putrajaya Corporation (PPJ, Kajang Municipal Council (MPKj, relevant agencies; Valuation and Property Services Department-JPPH (Ministry of Finance, Department of Town and Country Planning (Peninsular Malaysia, developers registered with ReHDA and residents / property owners in the study area. To conclude, this study offers adequate benefits to policy makers, also relevant agencies such as the local authorities, landowners, property developers, the relevant professionals and communities on the positive effects and significant relationships between landscape architecture and property development.

Identifying and Ranking the Determinants of Tourism Performance

DEFF Research Database (Denmark)

Assaf, A.George; Josiassen, Alexander

2012-01-01

, their tourism industries, and tourism businesses seek to improve the performance of the tourism industry and its constituents by vigorously promoting themselves to international tourists, cutting costs, and identifying synergies in their tourism endeavors. In seeking to improve the tourism industry......, the determinants that affect tourism performance are of key interest to the stakeholders. A key obstacle toward improving performance is the multitude of determinants that can affect tourism performance. The literature has yet to provide concrete insights into the determinants of tourism performance...... and their relative importance. The present study addresses this important gap. We identify and rank the determinants of tourism performance. We also provide performance measures of international tourism destinations. The results are derived using the Data Envelopment Analysis (DEA) and bootstrap truncated regression...

Properties and selection criteria for adsorbents

International Nuclear Information System (INIS)

Wirth, H.

1976-01-01

The paper gives a survey of the most important industrial adsorbents and of their suitability for different purposes. With special consideration of activated carbon, the properties and characteristic data are discussed which are used for assessing adsorbents. These, among other things, are as follows: specific surface area, pore size distribution, adsorption isotherms, hydrophobic properties, catalytic properties, chemical resistance, heat resistance, particle size and hardness. (orig.) [de

MicroRNAs regulate T-cell production of interleukin-9 and identify hypoxia-inducible factor-2α as an important regulator of T helper 9 and regulatory T-cell differentiation.

Science.gov (United States)

Singh, Yogesh; Garden, Oliver A; Lang, Florian; Cobb, Bradley S

2016-09-01

MicroRNAs (miRNAs) regulate many aspects of helper T cell (Th) development and function. Here we found that they are required for the suppression of interleukin-9 (IL-9) expression in Th9 cells and other Th subsets. Two highly related miRNAs (miR-15b and miR-16) that we previously found to play an important role in regulatory T (Treg) cell differentiation were capable of suppressing IL-9 expression when they were over-expressed in Th9 cells. We used these miRNAs as tools to identify novel regulators of IL-9 expression and found that they could regulate the expression of Epas1, which encodes hypoxia-inducible factor (HIF)-2α. HIF proteins regulate metabolic pathway usage that is important in determining appropriate Th differentiation. The related protein, HIF-1α enhances Th17 differentiation and inhibits Treg cell differentiation. Here we found that HIF-2α was required for IL-9 expression in Th9 cells, but its expression was not sufficient in other Th subsets. Furthermore, HIF-2α suppressed Treg cell differentiation like HIF-1α, demonstrating both similar and distinct roles of the HIF proteins in Th differentiation and adding a further dimension to their function. Ironically, even though miR-15b and miR-16 suppressed HIF-2α expression in Treg cells, inhibiting their function in Treg cells did not lead to an increase in IL-9 expression. Therefore, the physiologically relevant miRNAs that regulate IL-9 expression in Treg cells and other subsets remain unknown. Nevertheless, the analysis of miR-15b and miR-16 function led to the discovery of the importance of HIF-2α so this work demonstrated the utility of studying miRNA function to identify novel regulatory pathways in helper T-cell development. © 2016 John Wiley & Sons Ltd.

Useful and usable alarm systems : recommended properties

International Nuclear Information System (INIS)

Veland, Oeystein; Kaarstad, Magnhild; Seim, Lars Aage; Foerdestroemmen, Nils T.

2001-01-01

This document describes the result of a study on alarm systems conducted by IFE in Halden. The study was initiated by the Norwegian Petroleum Directorate. The objective was to identify and formulate a set of important properties for useful and usable alarm systems. The study is mainly based on review of the latest international recognised guidelines and standards on alarm systems available at the time of writing, with focus on realistic solutions from research and best practice from different industries. In addition, IFE experiences gathered through specification and design of alarm systems and experimental activities in HAMMLAB and bilateral projects, have been utilized where relevant. The document presents a total of 43 recommendations divided into a number of general recommendations and more detailed recommendations on alarm generation, structuring, prioritisation, presentation and handling. (Author)

CORRELATION BETWEEN INTELLECTUAL PROPERTY AND SCIENTIFIC ACTIVITY

Directory of Open Access Journals (Sweden)

Nataliia Shust

2017-07-01

Full Text Available Purpose: The article is dedicated to the analysis of legal nature and peculiarities of optimal correlation between the notions of intellectual property and scientific activity. Nowadays intellectual property as institution goes through the period of establishment in Ukraine. As the Soviet system of civil law was based on recognition and regulation of authors’ rights for the authors of scientific works, discoveries, inventions and innovation proposals as the ones having mainly relative, i.e. legally mandatory, but not absolute character.  Getting started to define the notion of intellectual property and intellectual property right in the system of interaction with scientific activity, it is important to say that such notion as “intellectual property” still needs enhancement. Its imperfection is due to the fact that this kind of property implies being formed by intellectual efforts of the author of scientific work, but legally it is processed with the help of documents that guarantee property right. Methods. General scientific method, philosophical method, specially-legal method of scientific research, system analysis method. Results: It is important to emphasize that not every result of scientific or creative work can become the object of intellectual property right, but the one that corresponds with law. Any scientific work falls within the purview of law if it corresponds with law demands. Scientific and technical results obtain legal protection only in case of appropriate qualification established by specific agency of State administration and issuement of law-enforcement document being limited by the territory of Ukraine. Protection of rights on the territory of other countries is realized only on the basis of correspondent international conventions and treaties. Discussion: Advanced modern countries realized the meaning and importance of usage and proper protection of creative and scientific work results known as �

Which outcomes are most important to people with aphasia and their families?

DEFF Research Database (Denmark)

Wallace, Sarah J.; Worrall, Linda; Rose, Tanya

2017-01-01

Purpose: To identify important treatment outcomes from the perspective of people with aphasia and their families using the ICF as a frame of reference. Methods: The nominal group technique was used with people with aphasia and their family members in seven countries to identify and rank important...... for research outcome measurement and clinical service provision which currently focuses on the measurement of body function outcomes. The wide range of desired outcomes generated by both people with aphasia and their family members, highlights the importance of collaborative goal setting within a family...... function components of the ICF. • The outcomes identified in this study suggest a broad role for clinicians working in aphasia rehabilitation. The categories of identified outcomes may be used clinically as a starting point in goal-setting discussions with clients and their families....

Predicting Soil-Air and Soil-Water Transport Properties During Soil Vapor Extraction

DEFF Research Database (Denmark)

Poulsen, Tjalfe

Increased application of in-situ technology for control and removal of volatile organic compounds (VOC) in the subsurface has made the understanding of soil physical properties and their impact upon contaminant transport even more important. Knowledge of contaminant transport is important when...... properties of undisturbed soil from more easily measurable soil properties are developed. The importance of soil properties with respect to contaminant migration during remediation by soil vapor extraction (SVE) in the unsaturated zone was investigated using numerical simulations....

Atomistic Properties of Solids

CERN Document Server

Sirdeshmukh, Dinker B; Subhadra, K G

2011-01-01

The book deals with atomistic properties of solids which are determined by the crystal structure, interatomic forces and atomic displacements influenced by the effects of temperature, stress and electric fields. The book gives equal importance to experimental details and theory. There are full chapters dedicated to the tensor nature of physical properties, mechanical properties, lattice vibrations, crystal structure determination and ferroelectricity. The other crystalline states like nano-, poly-, liquid- and quasi crystals are discussed. Several new topics like nonlinear optics and the Rietveld method are presented in the book. The book lays emphasis on the role of symmetry in crystal properties. Comprehensiveness is the strength of the book; this allows users at different levels a choice of chapters according to their requirements.

Importance of Cross-Cultural Counseling in Rehabilitation Counseling Curricula.

Science.gov (United States)

Watson, Albert L.

1988-01-01

Ninety-one members of the National Council on Rehabilitation Education were surveyed concerning the level of importance placed on cross-cultural content in rehabilitation counselor education curricula. Respondents rated 27 of 32 cross-cultural educational offerings as important, and identified seven additional offerings. Respondents' demographic…

Distributed design approach in persistent identifiers systems

Science.gov (United States)

Golodoniuc, Pavel; Car, Nicholas; Klump, Jens

2017-04-01

The need to identify both digital and physical objects is ubiquitous in our society. Past and present persistent identifier (PID) systems, of which there is a great variety in terms of technical and social implementations, have evolved with the advent of the Internet, which has allowed for globally unique and globally resolvable identifiers. PID systems have catered for identifier uniqueness, integrity, persistence, and trustworthiness, regardless of the identifier's application domain, the scope of which has expanded significantly in the past two decades. Since many PID systems have been largely conceived and developed by small communities, or even a single organisation, they have faced challenges in gaining widespread adoption and, most importantly, the ability to survive change of technology. This has left a legacy of identifiers that still exist and are being used but which have lost their resolution service. We believe that one of the causes of once successful PID systems fading is their reliance on a centralised technical infrastructure or a governing authority. Golodoniuc et al. (2016) proposed an approach to the development of PID systems that combines the use of (a) the Handle system, as a distributed system for the registration and first-degree resolution of persistent identifiers, and (b) the PID Service (Golodoniuc et al., 2015), to enable fine-grained resolution to different information object representations. The proposed approach solved the problem of guaranteed first-degree resolution of identifiers, but left fine-grained resolution and information delivery under the control of a single authoritative source, posing risk to the long-term availability of information resources. Herein, we develop these approaches further and explore the potential of large-scale decentralisation at all levels: (i) persistent identifiers and information resources registration; (ii) identifier resolution; and (iii) data delivery. To achieve large-scale decentralisation

Properties and behavior of quartz for the silicon process

Energy Technology Data Exchange (ETDEWEB)

Aasly, Kurt

2008-07-01

This PhD-thesis is a result of the study on important properties of quartz as a raw material for the metallurgical production of ferrosilicon and silicon metal. This includes defining mechanical properties important for the size reduction experienced during transport and storage and thermo-mechanical properties of quartz that is important for how the quartz reacts to the high temperatures experienced as it is charged on the furnace. Additionally, softening properties of quartz have been briefly discussed in some of the papers. Another important goal has been to test analytical and experimental methods for investigating the various properties. The investigations of important factors for the mechanical properties of ores and industrial minerals have been carried out as a literature study. The mining operation and transport from mine to smelter has been discussed and several factors that are significant for achieving best possible mechanical properties of the quartz have been identified. The most important factors are related to production in the mine and processing plant, which should be carefully planned to minimize the amount of blast-induced damage in the rock and thus achieve the best possible mechanical strength of the raw material. The amount of fines can be minimized by controlling the handling of the raw materials during the transport and storage. It is especially important to avoid high drops, both high single drops and accumulated height of all the drops in total. Investigations of the thermo-mechanical properties of quartz have been carried out by using different experimental and characterization methods. The petrographic investigations of the raw materials by polarized light microscopy have been important. Thermo-mechanical investigations have been high-temperature microthermometry and shock heating of quartz samples in an induction furnace with subsequent investigations of the heated material. The subsequent investigation included polarized- and

Assessing the relative importance of correlates of loneliness in later life

DEFF Research Database (Denmark)

Ejlskov, Linda; Wulff, Jesper; Bøggild, Henrik

2017-01-01

OBJECTIVES: Improving the design and targeting of interventions is important for alleviating loneliness among older adults. This requires identifying which correlates are the most important predictors of loneliness. This study demonstrates the use of recursive partitioning in exploring...... the characteristics and assessing the relative importance of correlates of loneliness in older adults. METHOD: Using exploratory regression trees and random forests, we examined combinations and the relative importance of 42 correlates in relation to loneliness at age 68 among 2453 participants from the birth cohort...... study the MRC National Survey of Health and Development. RESULTS: Positive mental well-being, personal mastery, identifying the spouse as the closest confidant, being extrovert and informal social contact were the most important correlates of lower loneliness levels. Participation in organised groups...

A Statistical Test for Identifying the Number of Creep Regimes When Using the Wilshire Equations for Creep Property Predictions

Science.gov (United States)

Evans, Mark

2016-12-01

A new parametric approach, termed the Wilshire equations, offers the realistic potential of being able to accurately lift materials operating at in-service conditions from accelerated test results lasting no more than 5000 hours. The success of this approach can be attributed to a well-defined linear relationship that appears to exist between various creep properties and a log transformation of the normalized stress. However, these linear trends are subject to discontinuities, the number of which appears to differ from material to material. These discontinuities have until now been (1) treated as abrupt in nature and (2) identified by eye from an inspection of simple graphical plots of the data. This article puts forward a statistical test for determining the correct number of discontinuities present within a creep data set and a method for allowing these discontinuities to occur more gradually, so that the methodology is more in line with the accepted view as to how creep mechanisms evolve with changing test conditions. These two developments are fully illustrated using creep data sets on two steel alloys. When these new procedures are applied to these steel alloys, not only do they produce more accurate and realistic looking long-term predictions of the minimum creep rate, but they also lead to different conclusions about the mechanisms determining the rates of creep from those originally put forward by Wilshire.

Patent analysis to identify shale gas development in China and the United States

International Nuclear Information System (INIS)

Lee, Woo Jin; Sohn, So Young

2014-01-01

Shale gas has become an increasingly important form of hydrocarbon energy, and related technologies reflect the geographical characteristics of the countries where the gas is extracted and stored. The United States (U.S.) produces most of the world’s shale gas, while China has the world’s largest shale gas reserves. In this research, we focused on identifying the trends in shale-gas related technologies registered to the United States Patent and Trademark Office (USPTO) and to the State Intellectual Property Office of the People’s Republic of China (SIPO) respectively. To cluster shale-gas related technologies, we text-mined the abstracts of patent specifications. It was found that in the U.S., the key advanced technologies were related to hydraulic fracturing, horizontal drilling, and slick water areas, whereas China had a focus on proppants. The results of our study are expected to assist energy experts in designing energy policies related to technology importation. - Highlights: • We analyzed shale gas-related patent applications in the USPTO and SIPO. • We clustered shale gas patents by text mining patent abstract. • Differences were observed in shale gas technologies developed in the U.S. and China. • We proposed the policies of shale gas exploration and development based on patent analysis

Identifying 21st Century STEM Competencies Using Workplace Data

Science.gov (United States)

Jang, Hyewon

2016-04-01

Gaps between science, technology, engineering, and mathematics (STEM) education and required workplace skills have been identified in industry, academia, and government. Educators acknowledge the need to reform STEM education to better prepare students for their future careers. We pursue this growing interest in the skills needed for STEM disciplines and ask whether frameworks for 21st century skills and engineering education cover all of important STEM competencies. In this study, we identify important STEM competencies and evaluate the relevance of current frameworks applied in education using the standardized job-specific database operated and maintained by the US Department of Labor. Our analysis of the importance of 109 skills, types of knowledge and work activities, revealed 18 skills, seven categories of knowledge, and 27 work activities important for STEM workers. We investigate the perspectives of STEM and non-STEM job incumbents, comparing the importance of each skill, knowledge, and work activity for the two groups. We aimed to condense dimensions of the 52 key areas by categorizing them according to the Katz and Kahn (1978) framework and testing for inter-rater reliability. Our findings show frameworks for 21st century skills and engineering education do not encompass all important STEM competencies. Implications for STEM education programs are discussed, including how they can bridge gaps between education and important workplace competencies.

Critically Important Object Security System Element Model

Directory of Open Access Journals (Sweden)

I. V. Khomyackov

2012-03-01

Full Text Available A stochastic model of critically important object security system element has been developed. The model includes mathematical description of the security system element properties and external influences. The state evolution of the security system element is described by the semi-Markov process with finite states number, the semi-Markov matrix and the initial semi-Markov process states probabilities distribution. External influences are set with the intensity of the Poisson thread.

Properties of Risk Measures of Generalized Entropy in Portfolio Selection

Directory of Open Access Journals (Sweden)

Rongxi Zhou

2017-12-01

Full Text Available This paper systematically investigates the properties of six kinds of entropy-based risk measures: Information Entropy and Cumulative Residual Entropy in the probability space, Fuzzy Entropy, Credibility Entropy and Sine Entropy in the fuzzy space, and Hybrid Entropy in the hybridized uncertainty of both fuzziness and randomness. We discover that none of the risk measures satisfy all six of the following properties, which various scholars have associated with effective risk measures: Monotonicity, Translation Invariance, Sub-additivity, Positive Homogeneity, Consistency and Convexity. Measures based on Fuzzy Entropy, Credibility Entropy, and Sine Entropy all exhibit the same properties: Sub-additivity, Positive Homogeneity, Consistency, and Convexity. These measures based on Information Entropy and Hybrid Entropy, meanwhile, only exhibit Sub-additivity and Consistency. Cumulative Residual Entropy satisfies just Sub-additivity, Positive Homogeneity, and Convexity. After identifying these properties, we develop seven portfolio models based on different risk measures and made empirical comparisons using samples from both the Shenzhen Stock Exchange of China and the New York Stock Exchange of America. The comparisons show that the Mean Fuzzy Entropy Model performs the best among the seven models with respect to both daily returns and relative cumulative returns. Overall, these results could provide an important reference for both constructing effective risk measures and rationally selecting the appropriate risk measure under different portfolio selection conditions.

THE MICROLENSING PROPERTIES OF A SAMPLE OF 87 LENSED QUASARS

International Nuclear Information System (INIS)

Mosquera, A. M.; Kochanek, C. S.

2011-01-01

Gravitational microlensing is a powerful tool for probing the physical properties of quasar accretion disks and properties of the lens galaxy such as its dark matter fraction and mean stellar mass. Unfortunately, the number of lensed quasars (∼90) exceeds our monitoring capabilities. Thus, estimating their microlensing properties is important for identifying good microlensing candidates as well as for the expectations of future surveys. In this work, we estimate the microlensing properties of a sample of 87 lensed quasars. While the median Einstein radius crossing timescale is 20.6 years, the median source crossing timescale is 7.3 months. Broadly speaking, this means that on ∼10 year timescales roughly half the lenses will be quiescent, with the source in a broad demagnified valley, and roughly half will be active with the source lying in the caustic ridges. We also found that the location of the lens system relative to the cosmic microwave background dipole has a modest effect on microlensing timescales, and in theory microlensing could be used to confirm the kinematic origin of the dipole. As a corollary of our study we analyzed the accretion rate parameters in a sub-sample of 32 lensed quasars. At fixed black hole mass, it is possible to sample a broad range of luminosities (i.e., Eddington factors) if it becomes feasible to monitor fainter lenses.

Packing and Cohesive Properties of Some Locally Extracted Starches

African Journals Online (AJOL)

... properties of the particles affect the packing and cohesive properties of the starches, and are important in predicting the behaviour of the starches during handling and use in pharmaceutical preparations. These properties need to be closely controlled in pre-formulation studies. Keywords: Packing and cohesive properties, ...

Mapping out the regulatory environment and its interaction with land and property markets

International Nuclear Information System (INIS)

Adams, David

2008-01-01

The purpose of this paper is to explain how the regulatory environment created by planning and building regulations interacts with land and property markets. Since this regulatory environment operates as a form of intervention within property markets in general and the development process in particular, it is essential first to understand the nature, structure and operation of land and property markets. These are covered in the first section. The second section identifies the aims and components of the planning system and building regulations. From this basis, four broad types of policy intervention are reviewed in the third section. These cover policies that seek to shape, regulate or stimulate market activity, and those that aim to build state or market capacity to produce desired outcomes. The final section uses the private residential development process as a case study to explore the extent to which state intervention can influence producer-consumer relationships in one important market sector. The paper argues that effective intervention in land and property markets requires the creation of a broad range of policy tools and their appropriate deployment to suit particular market circumstances. (author)

Properties of conventional contrast media

International Nuclear Information System (INIS)

Muetzel, W.

1981-01-01

A comprehensive overview is given of the properties of contrast media currently used in computed tomography (CT). The chemical structure of the compounds and the physicochemical properties derived therefrom are described. Emphasis is placed on the importance of the physicochemical properties of contrast media for tolerance and the pharmacokinetic behavior of compounds in the body. An outline is given of the basic ideas governing rational use of contrast media in CT, which result from complex, time-dependent distribution of contrast media in different tissue spaces. (Auth.)

Combinatorial Drug Screening Identifies Ewing Sarcoma-specific Sensitivities

DEFF Research Database (Denmark)

Radic-Sarikas, Branka; Tsafou, Kalliopi P; Emdal, Kristina B.

2017-01-01

Improvements in survival for Ewing sarcoma pediatric and adolescent patients have been modest over the past 20 years. Combinations of anticancer agents endure as an option to overcome resistance to single treatments caused by compensatory pathways. Moreover, combinations are thought to lessen any...... associated adverse side effects through reduced dosing, which is particularly important in childhood tumors. Using a parallel phenotypic combinatorial screening approach of cells derived from three pediatric tumor types, we identified Ewing sarcoma-specific interactions of a diverse set of targeted agents...... including approved drugs. We were able to retrieve highly synergistic drug combinations specific for Ewing sarcoma and identified signaling processes important for Ewing sarcoma cell proliferation determined by EWS-FLI1 We generated a molecular target profile of PKC412, a multikinase inhibitor with strong...

Surface properties of beached plastics.

Science.gov (United States)

Fotopoulou, Kalliopi N; Karapanagioti, Hrissi K

2015-07-01

Studying plastic characteristics in the marine environment is important to better understand interaction between plastics and the environment. In the present study, high-density polyethylene (HDPE), polyethylene terephalate (PET), and polyvinyl chloride (PVC) samples were collected from the coastal environment in order to study their surface properties. Surface properties such as surface functional groups, surface topography, point of zero charge, and color change are important factors that change during degradation. Eroded HDPE demonstrated an altered surface topography and color and new functional groups. Eroded PET surface was uneven, yellow, and occasionally, colonized by microbes. A decrease in Fourier transform infrared (FTIR) peaks was observed for eroded PET suggesting that degradation had occurred. For eroded PVC, its surface became more lamellar and a new FTIR peak was observed. These surface properties were obtained due to degradation and could be used to explain the interaction between plastics, microbes, and pollutants.

ECOPHARMACOVIGILANCE: ITS IMPORTANCE AND CHALLENGES

OpenAIRE

Dr. Bhavana Srivastava

2014-01-01

Active pharmaceutical ingredients represent a group of emerging environmental contamination. Even in trace amounts, they are of great concern due to then continuous introduction into the environment, their impact an ecosystem and human and vetenery health is of great importance. This has given birth to the science of Ecopharmacovigilance (EPV). It aims to ensure that significant environmental issues associated with pharmaceuticals in the environment are identified and managed appropriately. ...

Physical-chemical property based sequence motifs and methods regarding same

Science.gov (United States)

Braun, Werner [Friendswood, TX; Mathura, Venkatarajan S [Sarasota, FL; Schein, Catherine H [Friendswood, TX

2008-09-09

A data analysis system, program, and/or method, e.g., a data mining/data exploration method, using physical-chemical property motifs. For example, a sequence database may be searched for identifying segments thereof having physical-chemical properties similar to the physical-chemical property motifs.

Effects of chemical contamination on HDPE - thermo-mechanical and characterisation properties

International Nuclear Information System (INIS)

Ashraf, G.

2002-01-01

Studying the effects of chemical contamination on HDPE is an important precursor in recycling of plastic packaging and polymer reprocessing. This research involves and discusses the results of an in-depth investigation into the effects of chemically contaminating, using various acids, commercial grade high density polyethylene (HDPE) used commonly in packaging applications. An extensive formulation study was conducted and it became obvious that in some cases degradation had occurred to HDPE when chemically contaminated with particular functional group types. The functional groups in contaminated HDPE were successfully identified. A variety of analytical techniques such as Fourier transform Infra-red spectroscopy, X-ray Florescence, x-ray photo electron spectroscopy could identify compounds such as HCl acid, HNO/sub 3/ acid and other related contaminants. Some chemical additives had effects on the mechanical and thermal properties when added in the most appropriate concentration. The results have shown lower tensile modulus and strength tensile elongation, lower modular weight, melt flow index and crystallinity. The amount of contaminant concentration, the type of chemical functional groups used and the type of test selected to affect degradation are important factors in proving the effects of chemical contamination on HDPE in the melt state. (author)

Mechanical Properties and Acoustic Emission Properties of Rocks with Different Transverse Scales

Directory of Open Access Journals (Sweden)

Xi Yan

2017-01-01

Full Text Available Since the stability of engineering rock masses has important practical significance to projects like mining, tunneling, and petroleum engineering, it is necessary to study mechanical properties and stability prediction methods for rocks, cementing materials that are composed of minerals in all shapes and sizes. Rocks will generate acoustic emission during damage failure processes, which is deemed as an effective means of monitoring the stability of coal rocks. In the meantime, actual mining and roadway surrounding rocks tend to have transverse effects; namely, the transverse scale is larger than the length scale. Therefore, it is important to explore mechanical properties and acoustic emission properties of rocks under transverse size effects. Considering the transverse scale effects of rocks, this paper employs the microparticle flow software PFC2D to explore the influence of different aspect ratios on damage mechanics and acoustic emission properties of rocks. The results show that (1 the transverse scale affects uniaxial compression strength of rocks. As the aspect ratio increases, uniaxial compression strength of rocks decreases initially and later increases, showing a V-shape structure and (2 although it affects the maximum hit rate and the strain range of acoustic emission, it has little influence on the period of occurrence. As the transverse scale increases, both damage degree and damage rate of rocks decrease initially and later increase.

Comparison of physical chemical properties of powders and respirable aerosols of industrial mixed uranium and plutonium oxide fuels

International Nuclear Information System (INIS)

Eidson, A.F.

1982-01-01

Studies were performed to characterize physical and chemical properties which may be important in determining the metabolism of accidentally released, inhaled aerosols of industrial mixed uranium and plutonium oxide fuels and to compare the properties of bulk powders and the respirable fraction they include. X-ray diffraction measurements showed that analysis of mixed-oxide powders from four process steps served to characterize their respirable fractions. IR spectroscopy was useful as a method to detect organic binders that were not observed by X-ray diffraction methods. Both X-ray diffraction and IR spectroscopy methods can be used in combination to identify the sources of a complex aerosol that might be released from more than one fabrication step. Isotopic distributions in powders and aerosols showed that information important for radiation dose to tissue calculations or Pu lung burden estimates can be obtained by analysis of powders. (U.K.)

A target based approach identifies genomic predictors of breast cancer patient response to chemotherapy

Directory of Open Access Journals (Sweden)

Hallett Robin M

2012-05-01

Full Text Available Abstract Background The efficacy of chemotherapy regimens in breast cancer patients is variable and unpredictable. Whether individual patients either achieve long-term remission or suffer recurrence after therapy may be dictated by intrinsic properties of their breast tumors including genetic lesions and consequent aberrant transcriptional programs. Global gene expression profiling provides a powerful tool to identify such tumor-intrinsic transcriptional programs, whose analyses provide insight into the underlying biology of individual patient tumors. For example, multi-gene expression signatures have been identified that can predict the likelihood of disease reccurrence, and thus guide patient prognosis. Whereas such prognostic signatures are being introduced in the clinical setting, similar signatures that predict sensitivity or resistance to chemotherapy are not currently clinically available. Methods We used gene expression profiling to identify genes that were co-expressed with genes whose transcripts encode the protein targets of commonly used chemotherapeutic agents. Results Here, we present target based expression indices that predict breast tumor response to anthracycline and taxane based chemotherapy. Indeed, these signatures were independently predictive of chemotherapy response after adjusting for standard clinic-pathological variables such as age, grade, and estrogen receptor status in a cohort of 488 breast cancer patients treated with adriamycin and taxotere/taxol. Conclusions Importantly, our findings suggest the practicality of developing target based indices that predict response to therapeutics, as well as highlight the possibility of using gene signatures to guide the use of chemotherapy during treatment of breast cancer patients.

Identifying public expectations of genetic biobanks.

Science.gov (United States)

Critchley, Christine; Nicol, Dianne; McWhirter, Rebekah

2017-08-01

Understanding public priorities for biobanks is vital for maximising utility and efficiency of genetic research and maintaining respect for donors. This research directly assessed the relative importance the public place on different expectations of biobanks. Quantitative and qualitative results from a national sample of 800 Australians revealed that the majority attributed more importance to protecting privacy and ethical conduct than maximising new healthcare benefits, which was in turn viewed as more important than obtaining specific consent, benefit sharing, collaborating and sharing data. A latent class analysis identified two distinct classes displaying different patterns of expectations. One placed higher priority on behaviours that respect the donor ( n = 623), the other on accelerating science ( n = 278). Additional expectations derived from qualitative data included the need for biobanks to be transparent and to prioritise their research focus, educate the public and address commercialisation.

Phase transformations in synthesis technologies and sorption properties of zeolites from coal fly ash

Directory of Open Access Journals (Sweden)

О. Б. Котова

2016-08-01

Full Text Available Coal fly ash is generated in the course of combustion of coal at thermal power plants. Environmental problems increase sharply without disposing that industrial waste. Technologies were tested of hydrothermal synthesis of zeolites from fly ash forming during combustion of coal at thermal power plants of the Pechora coal basin and dependences were identified of the experiment conditions on physical and chemical properties of the end product. It is demonstrated that synthesizing zeolites from fly ash is the first stage of forming ceramic materials (ceramic membranes, which defines the fundamental character (importance of that area of studies. It was for the first time that sorption and structural characteristics and cation-exchange properties of fly ash from the Pechora basin coals were studied with respect to, Ba2+ and Sr2+.

Principal component analysis of normalized full spectrum mass spectrometry data in multiMS-toolbox: An effective tool to identify important factors for classification of different metabolic patterns and bacterial strains.

Science.gov (United States)

Cejnar, Pavel; Kuckova, Stepanka; Prochazka, Ales; Karamonova, Ludmila; Svobodova, Barbora

2018-06-15

Explorative statistical analysis of mass spectrometry data is still a time-consuming step. We analyzed critical factors for application of principal component analysis (PCA) in mass spectrometry and focused on two whole spectrum based normalization techniques and their application in the analysis of registered peak data and, in comparison, in full spectrum data analysis. We used this technique to identify different metabolic patterns in the bacterial culture of Cronobacter sakazakii, an important foodborne pathogen. Two software utilities, the ms-alone, a python-based utility for mass spectrometry data preprocessing and peak extraction, and the multiMS-toolbox, an R software tool for advanced peak registration and detailed explorative statistical analysis, were implemented. The bacterial culture of Cronobacter sakazakii was cultivated on Enterobacter sakazakii Isolation Agar, Blood Agar Base and Tryptone Soya Agar for 24 h and 48 h and applied by the smear method on an Autoflex speed MALDI-TOF mass spectrometer. For three tested cultivation media only two different metabolic patterns of Cronobacter sakazakii were identified using PCA applied on data normalized by two different normalization techniques. Results from matched peak data and subsequent detailed full spectrum analysis identified only two different metabolic patterns - a cultivation on Enterobacter sakazakii Isolation Agar showed significant differences to the cultivation on the other two tested media. The metabolic patterns for all tested cultivation media also proved the dependence on cultivation time. Both whole spectrum based normalization techniques together with the full spectrum PCA allow identification of important discriminative factors in experiments with several variable condition factors avoiding any problems with improper identification of peaks or emphasis on bellow threshold peak data. The amounts of processed data remain still manageable. Both implemented software utilities are available

Relationships between Molecular Composition and Optical Properties of Dissolved Organic Matter

Science.gov (United States)

Cooper, W. T.; Tfaily, M.; Osborne, D.; Paul, A.; Podgorski, D. C.; Corbett, J.; Chanton, J.

2009-12-01

Our focus is on the relationships between the optical properties of dissolved organic matter (DOM) and its molecular composition. For example, we demonstrated that changes in the absorption and fluorescence characteristics of DOM in outwelling from Brazilian mangrove forests correlated with decreases in highly unsaturated organic compounds as DOM was transported from mangrove porewaters to the continental shelf. In that work we combined ultrahigh resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) that provided detailed compositional information with absorption and Excitation/Emission Matrix (EEM) spectroscopy This presentation will highlight new results utilizing the combination of optical spectroscopy and FT-ICR mass spectrometry to illuminate the processes which control DOM cycling. Our focus will be on the contributions of the heteroatom components of DOM (i.e. organic sulfur and organic nitrogen) to its optical properties and how changes in optical properties correlate with important environmental processes like humification and bioavailability. Figure 1 below includes a narrow 0.20 Dalton window from a mass spectrum which demonstrates the ability of ultrahigh resolution mass spectrometry to resolve and identify nitrogen heteroatom compounds in DOM. Our study sites include the Glacial Lake Agassiz Peatlands (GLAP) in northern Minnesota and wetlands in the Caloosahatchee River basin in South Florida. Figure 1. Isolated 0.20 Da window of an ESI-FT-ICR mass spectrum of DOM from a GLAP bog. Labels identify N1 (d,e,f) and N3 classes of nitrogen heteroatoms. The 0.0031 Da mass spacing is used to confirm the N3 class.

The importance of interpersonal communication in poison centers.

Science.gov (United States)

Crouch, B I; Thomas, K C; Rothwell, E; Planalp, S; Ellington, L; Teemant, K

2013-11-01

Poison control center (PCC) personnel face many challenges in communicating with callers and with each other. The purpose of this study was to identify interpersonal communication issues that affect the work environment within PCCs. As part of a larger questionnaire study distributed electronically to members of the American Association of Poison Control Centers (AAPCC) to assess communication training needs for PCCs, three questions were included to assess interpersonal communication within the work environment: (1) How important is interpersonal communication within your center to a positive work environment? (not at all to extremely important, 1-7); (2) How disruptive is interpersonal communication to your work? (not at all to extremely disruptive, 1-7); and (3) What communication issues do you find most disruptive to your work? (free-text response). Descriptive and qualitative content analyses were used to identify themes in responses. A total of 537 responses were received from SPIs, directors, medical directors, and other PCC staff. Interpersonal communication within the PCC was rated as extremely important to a positive work environment (median = 7 and IQR = 6-7; 62.3% rated as extremely important). Interpersonal communication was rated as less than moderately disruptive on average (median = 3 and IQR = 2-4). Free-text responses were received from 335 (62%) respondents. Free-text comments were broadly categorized as relating to PCC personnel and work environment and issues related to PCC callers. Categories that emerged from the PCC personnel and work environment category included the following: poor interpersonal communication (n = 104; 31%); background noise (n = 96; 29%); poor work procedures (n = 51; 15%); and poor management communication (n = 38; 11%). Interpersonal communication within PCCs was considered to be important for a positive work environment. Although not found to be strongly disruptive by most respondents, several specific interpersonal

Production and antimicrobial property of glycolipid biosurfactants

Science.gov (United States)

Microbial glycolipids such as rhamnolipid (RL) and sophorolipid (SL) are an important class of biosurfactants with excellent surface tension-lowering activity. Besides their surfactant- and environment-friendly properties, however, additional value-added property such as bacteriocidal activity is n...

Importance of Knowledge Management in Human Resource Development

International Nuclear Information System (INIS)

Pleslic, Sanda

2014-01-01

Human resource management and knowledge management: • In human resource management - important to identify crucial knowledge base on which competitiveness of company depends → according this ensure appropriate development of human resources. • Era of so-called knowledge economy - only individual and organizational knowledge could give competitive advantage. • From operational perspective, knowledge management - systematic processes by which an organization identifies, creates, captures, acquires, shares and increase knowledge

Meteorological and Land Surface Properties Impacting Sea Breeze Extent and Aerosol Distribution in a Dry Environment

Science.gov (United States)

Igel, Adele L.; van den Heever, Susan C.; Johnson, Jill S.

2018-01-01

The properties of sea breeze circulations are influenced by a variety of meteorological and geophysical factors that interact with one another. These circulations can redistribute aerosol particles and pollution and therefore can play an important role in local air quality, as well as impact remote sensing. In this study, we select 11 factors that have the potential to impact either the sea breeze circulation properties and/or the spatial distribution of aerosols. Simulations are run to identify which of the 11 factors have the largest influence on the sea breeze properties and aerosol concentrations and to subsequently understand the mean response of these variables to the selected factors. All simulations are designed to be representative of conditions in coastal sub tropical environments and are thus relatively dry, as such they do not support deep convection associated with the sea breeze front. For this dry sea breeze regime, we find that the background wind speed was the most influential factor for the sea breeze propagation, with the soil saturation fraction also being important. For the spatial aerosol distribution, the most important factors were the soil moisture, sea-air temperature difference, and the initial boundary layer height. The importance of these factors seems to be strongly tied to the development of the surface-based mixed layer both ahead of and behind the sea breeze front. This study highlights potential avenues for further research regarding sea breeze dynamics and the impact of sea breeze circulations on pollution dispersion and remote sensing algorithms.

Importance of the neutron spectrum for determination of radiation damage

International Nuclear Information System (INIS)

Hehn, G.; Stiller, P.; Mattes, M.

1977-01-01

Since the radiation effects of neutrons depend strongly on the neutron energy, the correlation between the induced damage and the fluence of the fast neutrons shows appreciable disadvantages. The measured values of changes in material properties resulted in large differences for the same fast neutron fluence, being partly due to different neutron spectra. The uncertainties in damage data led to strong overdesign of important structural components. Different neutron environment at surveillance sample position may give an underestimation of the embrittlement in the reactor pressure vessel, which has to be avoided. The application of damage functions combined with accurately calculated neutron spectra, promise to be a reasonable solution. The damage function has the advantage of a phenomenological quantity that all spectral effects are included. But the correlation quantity has to be determined of high experimental costs. Therefore approximations of its energy distributions are very important. For the keV energy region the kerma function is reasonably good. For the MeV energy region a higher effort is needed to calculate the displacement cross section. The same holds for the low energy part. In all three parts the formation of stable material property levels may vary, so that the final correlation can be determined only by measurements of material properties in different neutron spectra. In material samples the spectra distribution of the displacement production rate was determined at different local positions outside the reactor core of a PWR and a fast breeder showing the most important energy regions of both reactors. (orig.) [de

77 FR 51026 - Federal Acquisition Regulation; Submission for OMB Review; Government Property

Science.gov (United States)

2012-08-23

..., special test equipment, and agency-peculiar property. Government property includes both Government... to the Plant Clearance Officer. (l) FAR 52.245-9(d) requires a contractor to identify the property...; Submission for OMB Review; Government Property AGENCY: Department of Defense (DOD), General Services...

Prediction of fruit and vegetable intake: The importance of contextualizing motivation.

Science.gov (United States)

Evans, Rachel; Kawabata, Masato; Thomas, Shirley

2015-09-01

Motivation is identified as a key antecedent of self-regulated behaviour, such as eating fruit and vegetables. However, inaccurate measurement of this construct may lead to poor prediction of behaviour and inflate the impact of post-motivational factors, such as planning, in models of health behaviour. This study explored the properties of a newly identified measure of motivation, termed behavioural resolve (Rhodes & Horne, 2013, Psychol. Sport Exerc., 14, 455-460), in relation to intention, planning, and fruit and vegetable intake (FVI). Prospective self-report survey. University students living in the United Kingdom completed two online surveys. The first assessed demographic and predictor variables (intention, behavioural resolve, action planning, and coping planning). The second, completed approximately 2 weeks later, measured average daily FVI and perceived experience of obstacles to FVI. At Time 1, there were 195 respondents, with 139 providing follow-up data. All predictor variables were significantly correlated with FVI. Two independent multiple hierarchical regression analyses revealed that both intention and behavioural resolve were significant predictors of FVI, but behavioural resolve explained greater FVI variance (40.1%) than intention (36.4%). Furthermore, action planning showed incremental predictive utility over intention, but not behavioural resolve, in predicting FVI. The results indicated that motivation is an important determinant of FVI for students, with behavioural resolve demonstrating advantages over intention as a measure of this domain and a predictor of FVI behaviour. © 2014 The British Psychological Society.

Politetrafluorene suture used as artificial mitral chord: mechanical properties and surgical implications.

Science.gov (United States)

Caimmi, Philippe P; Sabbatini, Maurizio; Fusaro, Luca; Cannas, Mario

2017-12-01

Novel surgical approach to repair degenerative mitral regurgitation such as transapical chordae tendineae replacement and "loop in loop" in loop techniques, need of artificial chordae longer than that used in the older techniques of chordae tendineae replacement. This difference in length has been reported as potential critical point for durability of artificial chordae. In the present paper we have investigated the elastic behavior of different diameter and length politetrafluorene (PTFE) suture threads as substitute of native chordae, to identify their reliability to use as long artificial chordae. PTFE suture threads with different diameters were investigated in their mechanical properties at different length from 2 to 14 cm, by a servo hydraulic testing machine, to test the elastic properties of the sample in their use as mitral chordae substitutes. Our study shows that the chordae length is an important parameter that can change the performance of chordae itself. The analysis of elastic/properties of suture threads specimen, reveals that long PTFE chords have an optimal mechanical behavior in which elongation is accompanied by a safe elastic properties that make them well resistance during multiple tractions. In conclusion the use of PTFE as an artificial chordae may represent a valid choice in case of insertion of artificial chordae with extra anatomic length.

Carotenoid Derivates in Achiote (Bixa orellana Seeds: Synthesis and Health Promoting Properties

Directory of Open Access Journals (Sweden)

Renata Rivera-Madrid

2016-09-01

Full Text Available Bixa orellana (family Bixaceae is a neotropical fast growing perennial tree of great agro-industrial value because its seeds have a high carotenoid content, mainly bixin. It has been used since pre-colonial times as a culinary colorant and spice, and for healing purposes. It is currently used as a natural pigment in the food, in pharmaceutical, and cosmetic industries, and it is commercially known as annatto. Recently, several studies have addressed the biological and medical properties of this natural pigment, both as potential source of new drugs or because its ingestion as a condiment or diet supplement may protect against several diseases. The most documented properties are anti-oxidative; but its anti-cancer, hypoglucemic, antibiotic and anti-inflammatory properties are also being studied. Bixin’s pathway elucidation and its regulation mechanisms are critical to improve the produce of this important carotenoid. Even though the bixin pathway has been established, the regulation of the genes involved in bixin production remains largely unknown. Our laboratory recently published B. orellana’s transcriptome and we have identified most of its MEP (methyl-D-erythritol 4-phosphate and carotenoid pathway genes. Annatto is a potential source of new drugs and can be a valuable nutraceutical supplement. However, its nutritional and healing properties require further study.

The development of infants' use of property-poor sounds to individuate objects.

Science.gov (United States)

Wilcox, Teresa; Smith, Tracy R

2010-12-01

There is evidence that infants as young as 4.5 months use property-rich but not property-poor sounds as the basis for individuating objects (Wilcox, Woods, Tuggy, & Napoli, 2006). The current research sought to identify the age at which infants demonstrate the capacity to use property-poor sounds. Using the task of Wilcox et al., infants aged 7 and 9 months were tested. The results revealed that 9- but not 7-month-olds demonstrated sensitivity to property-poor sounds (electronic tones) in an object individuation task. Additional results confirmed that the younger infants were sensitive to property-rich sounds (rattle sounds). These are the first positive results obtained with property-poor sounds in infants and lay the foundation for future research to identify the underlying basis for the developmental hierarchy favoring property-rich over property-poor sounds and possible mechanisms for change. Copyright © 2010 Elsevier Inc. All rights reserved.

Identifying Core Concepts of Cybersecurity: Results of Two Delphi Processes

Science.gov (United States)

Parekh, Geet; DeLatte, David; Herman, Geoffrey L.; Oliva, Linda; Phatak, Dhananjay; Scheponik, Travis; Sherman, Alan T.

2018-01-01

This paper presents and analyzes results of two Delphi processes that polled cybersecurity experts to rate cybersecurity topics based on importance, difficulty, and timelessness. These ratings can be used to identify core concepts--cross-cutting ideas that connect knowledge in the discipline. The first Delphi process identified core concepts that…

Mechanical Properties of Moringa ( Moringa oleifera ) Seeds in ...

African Journals Online (AJOL)

Mechanical properties are very important in the design of machines and the analysis of the behaviour of products during agricultural processing. In this research work, the mechanical properties of Moringa were determined as design parameters for the development of an oil expeller for the crop. The properties were the ...

Radiative Importance of Aerosol-Cloud Interaction

Science.gov (United States)

Tsay, Si-Chee

1999-01-01

even greater consequences. Presently we know that through the use of fossil fuel and land-use changes we have increased the concentration of greenhouse gases in the atmosphere. In parallel, we have seen a modest increase of global temperature in the last century. These two observations have been linked as cause and effect by climate models, but this connection is still experimentally not verified. The spatial and seasonal distribution of aerosol forcing is different from that of greenhouse gases, thus generating a different spatial fingerprint of climate change. This fingerprint was suggested as a method to identify the response of the climate system to anthropogenic forcing of greenhouse gases and aerosol. The aerosol fingerprint may be the only way to firmly establish the presence (or absence) of human impact on climate. Aerosol-cloud interaction through the indirect effect will be an important component of establishing this fingerprint.

Algorithm of actions to identify and reduce risks in the production of milk and plant products

Directory of Open Access Journals (Sweden)

L. E. Glagoleva

2016-01-01

Full Text Available Foods with a new generation of functional and improved consumer properties, corresponds to the modern concepts of nutrition science and consumer needs. functional food production is a major global trend in food science and the subject of innovation. One of the important trends is the use of plant complexes and plant food systems. Using the plant complexes (PC and plant food systems (PFS provides a number of benefits: improved consumer properties of the product, do not need to change the process, it is possible to control directional rheological properties and consistency of the finished products, reduced the number of risk points in the production cycle. This paper describes the development of an algorithm of action to identify and mitigate risks in the production of milk and plant products. Also conducted a risk analysis, identified and assessed the risks in the process of production, installed capacity of available resources to reduce the level of risk. Established and submitted to the critical control points in production processes, as well as the critical limits for each critical control points, and the procedure for corrective action in case of violations of the past. During the study, measured changes in the quantitative and qualitative composition of microflora of semi-finished and Quantity of Mesophilic Aerobic and Facultative Anaerobic Microorganisms (QMAFAnM. To determine QMAFAnM samples were taken: 1 – cheesecakes (control, 2 – cheesecakes with RPS. Microbiological studies analyzed frozen-conjugated semi-finished products was determined within 90 days. It is clear from the data that the cottage cheese with semi-finished products have a lower RPM 11.7%. Analyzing the data, it is possible to conclude that the physico-chemical, organoleptic and microbiological indicators of products was developed to set standards on cheese semi-finished products. multilevel structure that characterizes the quality indicators has been developed and is

Evaluation of the effect of salts on chemical, structural, textural, sensory and heating properties of cheese: Contribution of conventional methods and spectral ones.

Science.gov (United States)

Loudiyi, M; Aït-Kaddour, A

2018-03-21

Chemical composition, sensory characteristics, textural and functional properties are among the most important characteristics, which directly relates to the global quality of cheese and to consumer acceptability. A number of factors including milk composition, processing conditions and salt content, influences these properties. The past decades many investigations were performed on the possibilities to reduce salt content of cheese due to its adverse health effects, the current lifestyle and the awareness of the consumers for nutrition quality products. Due to the multiple potential effects of reducing NaCl (simple reduction or substitution) on cheese attributes, it is of utmost importance to identify and understand those effects in order to control the global quality and safety of the final product. In the present review a collection of the different results and conclusions drawn after studying the effect of salts by conventional (e.g. wet chemistry) and instrumental (e.g. spectral) methods on chemical, structural, textural, sensory and heating properties of cheese are presented.

Quantifying the risks of solid aerosol geoengineering: the role of fundamental material properties

Science.gov (United States)

Dykema, J. A.; Keutsch, F. N.; Keith, D.

2017-12-01

Solid aerosols have been considered as an alternative to sulfate aerosols for solar geoengineering due to their optical and chemical properties, which lead to different and possibly more attractive risk profiles. Solid aerosols can achieve higher solar scattering efficiency due to their higher refractive index, and in some cases may also be less effective absorbers of thermal infrared radiation. The optical properties of solid aerosols are however sensitive functions of the detailed physical properties of solid materials in question. The relevant details include the exact crystalline structure of the aerosols, the physical size of the particles, and interactions with background stratospheric molecular and particulate constituents. In this work, we examine the impact of these detailed physical properties on the radiative properties of calcite (CaCO3) solid aerosols. We examine how crystal morphology, size, chemical reactions, and interaction with background stratospheric aerosol may alter the scattering and absorption properties of calcite aerosols for solar and thermal infrared radiation. For example, in small particles, crystal lattice vibrations associated with the particle surface may lead to substantially different infrared absorption properties than bulk materials. We examine the wavelength dependence of absorption by the particles, which may lead to altered patterns of stratospheric radiative heating and equilibrium temperatures. Such temperature changes can lead to dynamical changes, with consequences for both stratospheric composition and tropospheric climate. We identify important uncertainties in the current state of understanding, investigate risks associated with these uncertainties, and survey potential approaches to quantitatively improving our knowledge of the relevant material properties.

Thermal and physicochemical properties important for the long term behavior of nuclear waste glasses

International Nuclear Information System (INIS)

Vernaz, E.; Matzke, H.J.

1992-01-01

High level nuclear waste from reprocessing of spent nuclear fuel has to be solidified in a stable matrix for safe long-time storage. Vitrification in borosilicate glasses is the technique accepted worldwide. A number of different glasses was developed in different national programs. The criteria and the reasons for selecting the final compositions are briefly described. Emphasis is placed on the French product R7T7 and on thermal and physicochemical properties though glasses developed in other national projects (e.g. the German product GP 98/12 etc.) are also treated. The basic physical and mechanical properties and the chemical durability of the glass in contact with water or other aqueous solutions are described. The basic mechanisms of aqueous corrosion are discussed and the evolving modelling of the leaching process is dealt with, as well as effects of container material, backfill, etc. The thermal behavior has also been studied and extensive data exist on diffusion of glass constituents (Na) and of interesting elements of the waste such as the alkalis Rb and Cs or the actinides U and Pu, as well as on crystallization processes in the glass during storage at elevated temperatures. Emphasis is placed on the radiation stability of the glasses, based on extensive studies using short-lived actinides (e.g. Cm-244) or ion-implantation to produce the damage expected during long storage at an accelerated rate. The radiation stability is shown to be very good, if realistic damage conditions are used. The knowledge accumulated in the past years is used to evaluate and predict the long-term evolution of the glass under storage conditions

Magnetic susceptibility to identify landscape segments on a detailed scale in the region of Jaboticabal, São Paulo, Brazil

Directory of Open Access Journals (Sweden)

Mariana dos Reis Barrios

2012-08-01

Full Text Available The agricultural potential is generally assessed and managed based on a one-dimensional vision of the soil profile, however, the increased appreciation of sustainable production has stimulated studies on faster and more accurate evaluation techniques and methods of the agricultural potential on detailed scales. The objective of this study was to investigate the possibility of using soil magnetic susceptibility for the identification of landscape segments on a detailed scale in the region of Jaboticabal, São Paulo State. The studied area has two slope curvatures: linear and concave, subdivided into three landscape segments: upper slope (US, concave, middle slope (MS, linear and lower slope (LS, linear. In each of these segments, 20 points were randomly sampled from a database with 207 samples forming a regular grid installed in each landscape segment. The soil physical and chemical properties, CO2 emissions (FCO2 and magnetic susceptibility (MS of the samples were evaluated represented by: magnetic susceptibility of air-dried fine earth (MS ADFE, magnetic susceptibility of the total sand fraction (MS TS and magnetic susceptibility of the clay fraction (MS Cl in the 0.00 - 0.15 m layer. The principal component analysis showed that MS is an important property that can be used to identify landscape segments, because the correlation of this property within the first principal component was high. The hierarchical cluster analysis method identified two groups based on the variables selected by principal component analysis; of the six selected variables, three were related to magnetic susceptibility. The landscape segments were differentiated similarly by the principal component analysis and by the cluster analysis using only the properties with higher discriminatory power. The cluster analysis of MS ADFE, MS TS and MS Cl allowed the formation of three groups that agree with the segment division established in the field. The grouping by cluster

NHash: Randomized N-Gram Hashing for Distributed Generation of Validatable Unique Study Identifiers in Multicenter Research.

Science.gov (United States)

Zhang, Guo-Qiang; Tao, Shiqiang; Xing, Guangming; Mozes, Jeno; Zonjy, Bilal; Lhatoo, Samden D; Cui, Licong

2015-11-10

A unique study identifier serves as a key for linking research data about a study subject without revealing protected health information in the identifier. While sufficient for single-site and limited-scale studies, the use of common unique study identifiers has several drawbacks for large multicenter studies, where thousands of research participants may be recruited from multiple sites. An important property of study identifiers is error tolerance (or validatable), in that inadvertent editing mistakes during their transmission and use will most likely result in invalid study identifiers. This paper introduces a novel method called "Randomized N-gram Hashing (NHash)," for generating unique study identifiers in a distributed and validatable fashion, in multicenter research. NHash has a unique set of properties: (1) it is a pseudonym serving the purpose of linking research data about a study participant for research purposes; (2) it can be generated automatically in a completely distributed fashion with virtually no risk for identifier collision; (3) it incorporates a set of cryptographic hash functions based on N-grams, with a combination of additional encryption techniques such as a shift cipher; (d) it is validatable (error tolerant) in the sense that inadvertent edit errors will mostly result in invalid identifiers. NHash consists of 2 phases. First, an intermediate string using randomized N-gram hashing is generated. This string consists of a collection of N-gram hashes f1, f2, ..., fk. The input for each function fi has 3 components: a random number r, an integer n, and input data m. The result, fi(r, n, m), is an n-gram of m with a starting position s, which is computed as (r mod |m|), where |m| represents the length of m. The output for Step 1 is the concatenation of the sequence f1(r1, n1, m1), f2(r2, n2, m2), ..., fk(rk, nk, mk). In the second phase, the intermediate string generated in Phase 1 is encrypted using techniques such as shift cipher. The result

The carboxyl-terminus directs TAF(I)48 to the nucleus and nucleolus and associates with multiple nuclear import receptors.

Science.gov (United States)

Dynes, Joseph L; Xu, Shuping; Bothner, Sarah; Lahti, Jill M; Hori, Roderick T

2004-03-01

The protein complex Selectivity Factor 1, composed of TBP, TAF(I)48, TAF(I)63 and TAF(I)110, is required for rRNA transcription by RNA polymerase I in the nucleolus. The steps involved in targeting Selectivity Factor 1 will be dependent on the transport pathways that are used and the localization signals that direct this trafficking. In order to investigate these issues, we characterized human TAF(I)48, a subunit of Selectivity Factor 1. By domain analysis of TAF(I)48, the carboxyl-terminal 51 residues were found to be required for the localization of TAF(I)48, as well as sufficient to direct Green Fluorescent Protein to the nucleus and nucleolus. The carboxyl-terminus of TAF(I)48 also has the ability to associate with multiple members of the beta-karyopherin family of nuclear import receptors, including importin beta (karyopherin beta1), transportin (karyopherin beta2) and RanBP5 (karyopherin beta3), in a Ran-dependent manner. This property of interacting with multiple beta-karyopherins has been previously reported for the nuclear localization signals of some ribosomal proteins that are likewise directed to the nucleolus. This study identifies the first nuclear import sequence identified within the TBP-Associated Factor subunits of Selectivity Factor 1.

Fungi identify the geographic origin of dust samples.

Directory of Open Access Journals (Sweden)

Neal S Grantham

Full Text Available There is a long history of archaeologists and forensic scientists using pollen found in a dust sample to identify its geographic origin or history. Such palynological approaches have important limitations as they require time-consuming identification of pollen grains, a priori knowledge of plant species distributions, and a sufficient diversity of pollen types to permit spatial or temporal identification. We demonstrate an alternative approach based on DNA sequencing analyses of the fungal diversity found in dust samples. Using nearly 1,000 dust samples collected from across the continental U.S., our analyses identify up to 40,000 fungal taxa from these samples, many of which exhibit a high degree of geographic endemism. We develop a statistical learning algorithm via discriminant analysis that exploits this geographic endemicity in the fungal diversity to correctly identify samples to within a few hundred kilometers of their geographic origin with high probability. In addition, our statistical approach provides a measure of certainty for each prediction, in contrast with current palynology methods that are almost always based on expert opinion and devoid of statistical inference. Fungal taxa found in dust samples can therefore be used to identify the origin of that dust and, more importantly, we can quantify our degree of certainty that a sample originated in a particular place. This work opens up a new approach to forensic biology that could be used by scientists to identify the origin of dust or soil samples found on objects, clothing, or archaeological artifacts.

Phenolic Composition and Sensory Properties of Ciders Produced from Latvian Apples

Directory of Open Access Journals (Sweden)

Riekstina-Dolge Rita

2014-07-01

Full Text Available Polyphenol compounds are very important components of cider – they are responsible for the colour and the bitterness and astringency balance of cider. The polyphenolic profile of apples and apple drinks is influenced by several factors: apple variety, climate, maturity, and technological processes applied. This research paper concerns the influence of apple variety on the phenolic compounds and sensory properties of cider. Fermentation of 12 varieties of apple juice with Saccharomyces cerevisiae yeast ‘71B-1122’ (Lalvin, Canada was performed in a laboratory of the Faculty of Food Technology of the Latvia University of Agriculture. The total phenol content (TPC was determined according to the Folin-Ciocalteu spectrophotometric method. Individual phenolic compounds were analysed using HPLC. Sensory properties (clarity, the apple, fruit and yeast aroma, the apple and yeast taste, sourness, astringency, and bitterness were evaluated by trained panelists using a line scale. Special attention was paid to the use of dessert apples for the production of cider. The most important sensory properties of cider are the aroma and taste of apples and fruit. All cider samples showed the intensity of apple aroma ranging from 5.3 to 7.6 points, and higher results were obtained for cider from the bvariety ‘Auksis’ apples. The TPC in cider samples varied from 792.68 to 3399.78 mg L-1: Among crab apples, the highest TPC was detected in ciders made from the ‘Hyslop’ and ’Riku’ varieties, whereas among dessert apples, the highest TPC was detected in ciders made from the ‘Antonovka’ variety. Among the twelve phenols identified in cider samples, chlorogenic acid and caffeic acid were the dominating ones. Variation in the sensory properties of ciders was dependent on the physicochemical composition of the apples used.

Identifying predictors of work engagement: An example from a management consultancy company

OpenAIRE

Persson, Andreas

2010-01-01

Empirical evidence suggests work engagement to be of crucial importance for business critical aspects such as work performance and employee retention. When building a strategy for enhancing engagement in the workplace, identifying its predictors becomes important. Therefore, the aim of this study was to identify predictors related to work engagement. The study was conducted in a management consultancy company, through analyzing their employee survey. Results indicated satisfaction with leader...

A case study of identify importance of land use planning in road safety, Benidorm

Energy Technology Data Exchange (ETDEWEB)

Casares Blanco, J.; Sanchez Galiano, J.C.; Fernandez Aracil, P.; Ortuño Padilla, A.

2016-07-01

This research analyses how urban form, land use and urban density, may influence the incidence of traffic-related crashes injuries and deaths. It begins with a theoretical overview of studies which deal with the study of the relationship between urban patterns and road safety. Next, it details the development of a database of crash incidence and urban form at the district level for the city of Benidorm (Alicante, Spain) in 2010. Subsequently, it is developed a negative binomial approach for intra-city motor vehicle crash analysis. One-year crash data for Benidorm (the fourth largest tourism destination of Spain, after Barcelona, Madrid and San Bartolomé de Tirajana, and exclusively tourist-oriented city) are analyzed using a geographic information system (GIS) to generate relevant inputs for the analysis. In general, the study finds that a strong land use mix results on fewer road accidents, whereas accidents are more common but less severe in areas of high urban density. Finally, pedestrian accidents research showed that rural and low density environment is related to an important road accident numbers unlike tourism-oriented zones, much more safe for them. Based on these findings, the paper discusses the implications for urban design practice. (Author)

A simple electrostatic switch important in the activation of type I protein kinase A by cyclic AMP.

Science.gov (United States)

Vigil, Dominico; Lin, Jung-Hsin; Sotriffer, Christoph A; Pennypacker, Juniper K; McCammon, J Andrew; Taylor, Susan S

2006-01-01

Cyclic AMP activates protein kinase A by binding to an inhibitory regulatory (R) subunit and releasing inhibition of the catalytic (C) subunit. Even though crystal structures of regulatory and catalytic subunits have been solved, the precise molecular mechanism by which cyclic AMP activates the kinase remains unknown. The dynamic properties of the cAMP binding domain in the absence of cAMP or C-subunit are also unknown. Here we report molecular-dynamics simulations and mutational studies of the RIalpha R-subunit that identify the C-helix as a highly dynamic switch which relays cAMP binding to the helical C-subunit binding regions. Furthermore, we identify an important salt bridge which links cAMP binding directly to the C-helix that is necessary for normal activation. Additional mutations show that a hydrophobic "hinge" region is not as critical for the cross-talk in PKA as it is in the homologous EPAC protein, illustrating how cAMP can control diverse functions using the evolutionarily conserved cAMP-binding domains.

Effect of crystallographic texture on the bulk magnetic properties of non-oriented electrical steels

Energy Technology Data Exchange (ETDEWEB)

Ghosh, Pampa, E-mail: pampaghosh@gmail.com [Department of Mining and Materials Engineering, McGill University, 3610 University Street, Montreal, Quebec, Canada H3A 0C5 (Canada); Chromik, Richard R., E-mail: richard.chromik@mcgill.ca [Department of Mining and Materials Engineering, McGill University, 3610 University Street, Montreal, Quebec, Canada H3A 0C5 (Canada); Vashegi, Babak; Knight, Andrew M. [Department of Electrical and Computer Engineering, University of Alberta, Edmonton, Alberta, Canada T6G 2V4 (Canada)

2014-09-01

Quantitative physical models for non-oriented electrical steels require precise knowledge of chemical and microstructural parameters for the material, with crystallographic texture being one of the most important. Describing the structure–property relationships in these materials is made difficult in that all of the parameters have an effect on magnetic properties. In the present study, a set of non-oriented electrical steel specimens are examined, where chemistry and grain size are kept similar from sample to sample, but texture is varied. A new texture parameter called Magnetic Texture Factor is introduced which is defined as the ratio of the volume fractions of 〈100〉 direction to 〈111〉 direction along magnetization vector. It was found that this Magnetic Texture Factor was a better parameter for identifying trends of magnetic properties with crystallographic texture than the often used Texture Factor, which is described as the ratio of the volume fractions of {100} planes to {111} planes. - Highlights: • Magnetic properties of a set of electrical steels were measured. • The effect of crystallographic texture was isolated from other material parameters. • A new texture factor is introduced called the Magnetic Texture Factor.

Measurement of diffusive properties of intact rock

Energy Technology Data Exchange (ETDEWEB)

Harvey, K B

1996-12-01

In the Postclosure Assessment of a Reference System for the Disposal of Canada`s Nuclear Fuel Waste (Goodwin et al. 1994) the disposal vault is assumed to be surrounded by a zone of intact rock, referred to as the `exclusion zone.` A sensitivity analysis of the relative effectiveness of the several engineered and natural barriers that contribute to the safety of the reference disposal system has shown that this zone of intact rock is the most effective of these barriers to the movement of radionuclides through the reference system. Peer review of the geosphere model used in the case study for the EIS (Environmental Impact Statement) of the Canadian Nuclear Fuel Waste Management Program has identified the need to quantify the properties of the intact rock surrounding the disposal vault that would control the transport of radionuclides by diffusion. The Postclosure Assessment also identified the need for appropriate values of the free water diffusion coefficient (D{sub o}) for {sup 129}1 and {sup 14}C. The measurement of rock resistivity allows the calculation of the Formation Factor for a rock This review describes the Formation Factor, diffusivity, permeability, and porosity, and how these properties might be measured or inferred for insitu rock under the conditions that apply to the intact rock surrounding a potential disposal vault. The importance of measuring the intrinsic diffusion coefficient (D{sup i}) of diffusing species under solution salinities simulating those of groundwaters is emphasised, and a method of measurement is described that is independent of the diffusing medium, and which would be appropriate for measurements made in chemically complex media such as groundwaters. (author). 95 refs., 4 tabs., 39 figs.

Measurement of diffusive properties of intact rock

International Nuclear Information System (INIS)

Harvey, K.B.

1996-12-01

In the Postclosure Assessment of a Reference System for the Disposal of Canada's Nuclear Fuel Waste (Goodwin et al. 1994) the disposal vault is assumed to be surrounded by a zone of intact rock, referred to as the 'exclusion zone.' A sensitivity analysis of the relative effectiveness of the several engineered and natural barriers that contribute to the safety of the reference disposal system has shown that this zone of intact rock is the most effective of these barriers to the movement of radionuclides through the reference system. Peer review of the geosphere model used in the case study for the EIS (Environmental Impact Statement) of the Canadian Nuclear Fuel Waste Management Program has identified the need to quantify the properties of the intact rock surrounding the disposal vault that would control the transport of radionuclides by diffusion. The Postclosure Assessment also identified the need for appropriate values of the free water diffusion coefficient (D o ) for 129 1 and 14 C. The measurement of rock resistivity allows the calculation of the Formation Factor for a rock This review describes the Formation Factor, diffusivity, permeability, and porosity, and how these properties might be measured or inferred for insitu rock under the conditions that apply to the intact rock surrounding a potential disposal vault. The importance of measuring the intrinsic diffusion coefficient (D i ) of diffusing species under solution salinities simulating those of groundwaters is emphasised, and a method of measurement is described that is independent of the diffusing medium, and which would be appropriate for measurements made in chemically complex media such as groundwaters. (author). 95 refs., 4 tabs., 39 figs

Use of genetic algorithm to identify thermophysical properties of deposited fouling in heat exchanger tubes

International Nuclear Information System (INIS)

Adili, Ali; Ben Salah, Mohieddine; Kerkeni, Chekib; Ben Nasrallah, Sassi

2009-01-01

At high temperature, the circulation of fluid in heat exchangers provides a tendency for fouling accumulation to take place on the internal surface of tubes. This paper shows an experimental process of thermophysical properties estimation of the fouling deposited on internal surface of a heat exchanger tube using genetic algorithms (GAs). The genetic algorithm is used to minimize an objective function containing calculated and measured temperatures. The experimental bench using a photothermal method with a finite width pulse heat excitation is used and the estimated parameters are obtained with high accuracy

Economic importance and GIS mapping of medicinal plants in Iran ...

African Journals Online (AJOL)

This study identified the economic importance of medicinal plants and evaluated with Geographical Information System (GIS) tool to develop spatial maps covering medicinal plants prevalent in Darkesh area, Northern Khorasan, Iran. Then provide the coordinates of the identified area as your results. 10 medicinal plants ...

Drosophila melanogaster "a potential model organism" for identification of pharmacological properties of plants/plant-derived components.

Science.gov (United States)

Panchal, Komal; Tiwari, Anand K

2017-05-01

Plants/plant-derived components have been used from ancient times to treat/cure several human diseases. Plants and their parts possess several chemical components that play the vital role in the improvement of human health and their life expectancy. Allopathic medicines have been playing a key role in the treatment of several diseases. Though allopathic medicines provide fast relief, long time consumption cause serious health concerns such as hyperallergic reactions, liver damage, etc. So, the study of medicinal plants which rarely cause any side effect is very important to mankind. Plants contain many health benefit properties like antioxidant, anti-aging, neuroprotective, anti-genotoxic, anti-mutagenic and bioinsecticidal activity. Thus, identification of pharmacological properties of plants/plant-derived components are of utmost importance to be explored. Several model organisms have been used to identify the pharmacological properties of the different plants or active components therein and Drosophila is one of them. Drosophila melanogaster "fruit fly" is a well understood, high-throughput model organism being used more than 110 years to study the different biological aspects related to the development and diseases. Most of the developmental and cell signaling pathways and ∼75% human disease-related genes are conserved between human and Drosophila. Using Drosophila, one can easily analyze the pharmacological properties of plants/plant-derived components by performing several assays available with flies such as survivorship, locomotor, antioxidant, cell death, etc. The current review focuses on the potential of Drosophila melanogaster for the identification of medicinal/pharmacological properties associated with plants/plant-derived components. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Psychometric properties and reliability of the Assessment Screen to Identify Survivors Toolkit for Gender Based Violence (ASIST-GBV): results from humanitarian settings in Ethiopia and Colombia.

Science.gov (United States)

Vu, Alexander; Wirtz, Andrea; Pham, Kiemanh; Singh, Sonal; Rubenstein, Leonard; Glass, Nancy; Perrin, Nancy

2016-01-01

Refugees and internally displaced persons who are affected by armed-conflict are at increased vulnerability to some forms of sexual violence or other types of gender-based violence. A validated, brief and easy-to-administer screening tool will help service providers identify GBV survivors and refer them to appropriate GBV services. To date, no such GBV screening tool exists. We developed the 7-item ASIST-GBV screening tool from qualitative research that included individual interviews and focus groups with GBV refugee and IDP survivors. This study presents the psychometric properties of the ASIST-GBV with female refugees living in Ethiopia and IDPs in Colombia. Several strategies were used to validate ASIST-GBV, including a 3 month implementation to validate the brief screening tool with women/girls seeking health services, aged ≥15 years in Ethiopia (N = 487) and female IDPs aged ≥ 18 years in Colombia (N = 511). High proportions of women screened positive for past-year GBV according to the ASIST-GBV: 50.6 % in Ethiopia and 63.4 % in Colombia. The factor analysis identified a single dimension, meaning that all items loaded on the single factor. Cronbach's α = 0.77. A 2-parameter logistic IRT model was used for estimating the precision and discriminating power of each item. Item difficulty varied across the continuum of GBV experiences in the following order (lowest to highest): threats of violence (0.690), physical violence (1.28), forced sex (2.49), coercive sex for survival (2.25), forced marriage (3.51), and forced pregnancy (6.33). Discrimination results showed that forced pregnancy was the item with the strongest ability to discriminate between different levels of GBV. Physical violence and forced sex also have higher levels of discrimination with threats of violence discriminating among women at the low end of the GBV continuum and coercive sex for survival among women at the mid-range of the continuum. The findings demonstrate that

Modeling material-degradation-induced elastic property of tissue engineering scaffolds.

Science.gov (United States)

Bawolin, N K; Li, M G; Chen, X B; Zhang, W J

2010-11-01

The mechanical properties of tissue engineering scaffolds play a critical role in the success of repairing damaged tissues/organs. Determining the mechanical properties has proven to be a challenging task as these properties are not constant but depend upon time as the scaffold degrades. In this study, the modeling of the time-dependent mechanical properties of a scaffold is performed based on the concept of finite element model updating. This modeling approach contains three steps: (1) development of a finite element model for the effective mechanical properties of the scaffold, (2) parametrizing the finite element model by selecting parameters associated with the scaffold microstructure and/or material properties, which vary with scaffold degradation, and (3) identifying selected parameters as functions of time based on measurements from the tests on the scaffold mechanical properties as they degrade. To validate the developed model, scaffolds were made from the biocompatible polymer polycaprolactone (PCL) mixed with hydroxylapatite (HA) nanoparticles and their mechanical properties were examined in terms of the Young modulus. Based on the bulk degradation exhibited by the PCL/HA scaffold, the molecular weight was selected for model updating. With the identified molecular weight, the finite element model developed was effective for predicting the time-dependent mechanical properties of PCL/HA scaffolds during degradation.

Patients' perceptions of their "most" and "least" important medications: a retrospective cohort study.

Science.gov (United States)

Linsky, Amy; Simon, Steven R

2012-11-02

Despite benefits of adherence, little is known about the degree to which patients will express their perceptions of medications as more or less important to take as prescribed. We determined the frequency with which Veteran patients would explicitly identify one of their medications as "most important" or "least important." We conducted a retrospective cohort study of patients from ambulatory clinics at VA Boston from April 2010-July 2011. Patients answered two questions: "Which one of your medicines, if any, do you think is the most important? (if none, please write 'none')" and "Which one of your medicines, if any, do you think is the least important? (if none, please write 'none')." We determined the prevalence of response categories for each question. Our cohort of 104 patients was predominantly male (95%), with a mean of 9 medications (SD 5.7). Regarding their most important medication, 41 patients (39%) identified one specific medication; 26 (25%) selected more than one; 21 (20%) wrote "none"; and 16 (15%) did not answer the question. For their least important medication, 31 Veterans (30%) chose one specific medication; two (2%) chose more than one; 51 (49%) wrote "none"; and 20 (19%) did not directly answer the question. Thirty-five percent of patients did not identify a most important medication, and 68% did not identify a least important medication. Better understanding of how patients prioritize medications and how best to elicit this information will improve patient-provider communication, which may in turn lead to better adherence.

Functional importance of PAI-1 glycosylation

DEFF Research Database (Denmark)

Christensen, Anni; Naessens, Dominik; Skottrup, Peter

2001-01-01

Structure-function studies of plasminogen activator inhibitor-1 (PAI-1) have previously been performed mostly with non-glycosylated material expressed in E. coli. We have now studied the importance of PAI-1 glycosylation for its functional properties. PAI-1 has 3 potential sites for N......-glycosylated PAI-1 could be conferred upon PAI-1 expressed in HEK293 cells by mutational inactivation of one or the other glycosylation site. These findings reveal a novel functional role for glycosylation of a serpin. The glycosylation sites are localised between a-helix H and b-strand 2C and b-strand 3C and a...

Group-contribution⁺ (GC⁺) based estimation of properties of pure components: Improved property estimation and uncertainty analysis

DEFF Research Database (Denmark)

Hukkerikar, Amol; Sarup, Bent; Ten Kate, Antoon

2012-01-01

, Hansen solubility parameters, Hildebrand solubility parameter, octanol/water partition coefficient, acentric factor, and liquid molar volume at 298 K. Important issues related to property modeling such as reliability and predictive capability of the property prediction models, and thermodynamic...

Targeting imported malaria through social networks: a potential strategy for malaria elimination in Swaziland.

Science.gov (United States)

Koita, Kadiatou; Novotny, Joseph; Kunene, Simon; Zulu, Zulizile; Ntshalintshali, Nyasatu; Gandhi, Monica; Gosling, Roland

2013-06-27

Swaziland has made great progress towards its goal of malaria elimination by 2015. However, malaria importation from neighbouring high-endemic Mozambique through Swaziland's eastern border remains a major factor that could prevent elimination from being achieved. In order to reach elimination, Swaziland must rapidly identify and treat imported malaria cases before onward transmission occurs. A nationwide formative assessment was conducted over eight weeks to determine if the imported cases of malaria identified by the Swaziland National Malaria Control Programme could be linked to broader social networks and to explore methods to access these networks. Using a structured format, interviews were carried out with malaria surveillance agents (6), health providers (10), previously identified imported malaria cases (19) and people belonging to the networks identified through these interviews (25). Most imported malaria cases were Mozambicans (63%, 12/19) making a living in Swaziland and sustaining their families in Mozambique. The majority of imported cases (73%, 14/19) were labourers and self-employed contractors who travelled frequently to Mozambique to visit their families and conduct business. Social networks of imported cases with similar travel patterns were identified through these interviews. Nearly all imported cases (89%, 17/19) were willing to share contact information to enable network members to be interviewed. Interviews of network members and key informants revealed common congregation points, such as the urban market places in Manzini and Malkerns, as well as certain bus stations, where people with similar travel patterns and malaria risk behaviours could be located and tested for malaria. This study demonstrated that imported cases of malaria belonged to networks of people with similar travel patterns. This study may provide novel methods for screening high-risk groups of travellers using both snowball sampling and time-location sampling of networks to

Anisotropic nanomaterials preparation, properties, and applications

CERN Document Server

Li, Quan

2015-01-01

In this book anisotropic one-dimensional and two-dimensional nanoscale building blocks and their assembly into fascinating and qualitatively new functional structures embracing both hard and soft components are explained. Contributions from leading experts regarding important aspects like synthesis, assembly, properties and applications of the above materials are compiled into a reference book. The anisotropy, i.e. the direction-dependent physical properties, of materials is fascinating and elegant and has sparked the quest for anisotropic materials with useful properties. With such a curiosi

Identifying variables that influence manufacturing product quality

Directory of Open Access Journals (Sweden)

Marek Krynke

2014-10-01

Full Text Available In the article a risk analysis of the production process of selected products in a plant producing votive candles was conducted. The Pareto-Lorenz diagram and FMEA method were used which indicated the most important areas affecting the production of selected elements of candles. The synthesis of intangible factors affecting production in the audited company was also carried out with particular emphasis on the operation of the production system. The factors determining the validity of studies was examined, describing the principle of BOST 14 Toyota management. The most important areas of the company were identified, positively affecting the production process.

Coastal upwelling ecosystems are often identified as regions ...

African Journals Online (AJOL)

spamer

... are often identified as regions susceptible to seasonal blooms of harmful ... that the bay acts as a net importer of bottom water and net exporter of surface waters over a synoptic cycle. This ... waves or wind stress on the surface friction layer.

Formulation of eb-curable epoxy resin : some important parameters

International Nuclear Information System (INIS)

Dahlan bin Haji Mohd; Hosoi, Fumio; Sasaki, Takashi

1989-01-01

The works on the electron-beam curing of surface coatings using epoxy acrylic-based resins were discussed. The works covered among other things the effect of molecular weights of the resins on the physical properties of coatings and their physical and chemical characterizations. The emphasis was given to formulating the resins applicable to surface coatings. Curings were done on a low-energy electron beam accelerator operating at 250 kV. A number of parameters deemed important to formulations, such as the molecular weights of the oligomers and monomers, monomer ratios, and HEA additions were explored. It was found that one could modify the physical properties of the coatings by changing or adjusting those parameters. (author)

Statistical properties of country risk ratings under oil price volatility: Evidence from selected oil-exporting countries

International Nuclear Information System (INIS)

Liu, Chang; Sun, Xiaolei; Chen, Jianming; Li, Jianping

2016-01-01

This paper focuses on the application of panel models for identification and analysis of influence of oil price volatility on statistical properties of country risk ratings which stem from uncertainty of macroeconomic fluctuations. Firstly, two statistical properties of country risk ratings, volatility clustering and asymmetrical revision were identified in a theoretical framework based on Cruces (2006). Secondly, considering the oil price volatility, numerical experiments were conducted based on extended models to test and verify specific properties of country risk ratings in selected oil-exporting countries. Empirical results suggest that properties of country risk remain comparatively steady despite oil price volatility. It is also found that the oil price volatility can obviously exaggerate the country risk volatility, as it happened during 2007–2009. Country clustering based on the properties of country risk ratings shows that the selected countries maintain a significant clustering tendency. These features are of great importance for estimating risk exposure of international trade and investments in oil export during extreme situations. - Highlights: •Relationship between oil price volatility and country risk is the focus. •An extended model based on Cruces (2006) is proposed. •Volatility clustering and asymmetrical revision of country risk ratings is explored. •Oil price volatility can obviously exaggerate properties of country risk volatility.

Characterisation, quantity and sorptive properties of microplastics extracted from cosmetics.

Science.gov (United States)

Napper, Imogen E; Bakir, Adil; Rowland, Steven J; Thompson, Richard C

2015-10-15

Cosmetic products, such as facial scrubs, have been identified as potentially important primary sources of microplastics to the marine environment. This study characterises, quantifies and then investigates the sorptive properties of plastic microbeads that are used as exfoliants in cosmetics. Polyethylene microbeads were extracted from several products, and shown to have a wide size range (mean diameters between 164 and 327 μm). We estimated that between 4594 and 94,500 microbeads could be released in a single use. To examine the potential for microbeads to accumulate and transport chemicals they were exposed to a binary mixture of (3)H-phenanthrene and (14)C-DDT in seawater. The potential for transport of sorbed chemicals by microbeads was broadly similar to that of polythene (PE) particles used in previous sorption studies. In conclusion, cosmetic exfoliants are a potentially important, yet preventable source of microplastic contamination in the marine environment. Copyright © 2015 Elsevier Ltd. All rights reserved.

Importance of individual events in temporal networks

International Nuclear Information System (INIS)

Takaguchi, Taro; Masuda, Naoki; Sato, Nobuo; Yano, Kazuo

2012-01-01

Records of time-stamped social interactions between pairs of individuals (e.g. face-to-face conversations, e-mail exchanges and phone calls) constitute a so-called temporal network. A remarkable difference between temporal networks and conventional static networks is that time-stamped events rather than links are the unit elements generating the collective behavior of nodes. We propose an importance measure for single interaction events. By generalizing the concept of the advance of events proposed by Kossinets et al (2008 Proc. 14th ACM SIGKDD Int. Conf. on Knowledge Discovery and Data Mining p 435), we propose that an event is central when it carries new information about others to the two nodes involved in the event. We find that the proposed measure properly quantifies the importance of events in connecting nodes along time-ordered paths. Because of strong heterogeneity in the importance of events present in real data, a small fraction of highly important events is necessary and sufficient to sustain the connectivity of temporal networks. Nevertheless, in contrast to the behavior of scale-free networks against link removal, this property mainly results from bursty activity patterns and not heterogeneous degree distributions. (paper)

Efficiency of different techniques to identify changes in land use

Science.gov (United States)

Zornoza, Raúl; Mateix-Solera, Jorge; Gerrero, César

2013-04-01

The need for the development of sensitive and efficient methodologies for soil quality evaluation is increasing. The ability to assess soil quality and identify key soil properties that serve as indicators of soil function is complicated by the multiplicity of physical, chemical and biological factors that control soil processes. In the mountain region of the Mediterranean Basin of Spain, almond trees have been cultivated in terraced orchards for centuries. These crops are immersed in the Mediterranean forest scenery, configuring a mosaic landscape where orchards are integrated in the forest masses. In the last decades, almond orchards are being abandoned, leading to an increase in vegetation cover, since abandoned fields are naturally colonized by the surrounded natural vegetation. Soil processes and properties are expected to be associated with vegetation successional dynamics. Thus, the establishment of suitable parameters to monitor soil quality related to land use changes is particularly important to guarantee the regeneration of the mature community. In this study, we selected three land uses, constituted by forest, almond trees orchards, and orchards abandoned between 10 and 15 years previously to sampling. Sampling was carried out in four different locations in SE Spain. The main purpose was to evaluate if changes in management have significantly influenced different sets of soil characteristics. For this purpose, we used a discriminant analysis (DA). The different sets of soil characteristics tested in this study were 1: physical, chemical and biochemical properties; 2: soil near infrared (NIR) spectra; and 3: phospholipid fatty acids (PLFAs). After the DA performed with the sets 1 and 2, the three land uses were clearly separated by the two first discriminant functions, and more than 85 % of the samples were correctly classified (grouped). Using the sets 3 and 4 for DA resulted in a slightly better separation of land uses, being more than 85% of the

Alteration dependent physical-mechanical properties of quartz-diorite building stones

Directory of Open Access Journals (Sweden)

Masoud Torkan

2016-12-01

Full Text Available The microscopic and geomechanical properties of igneous building stones include the level of alteration, presence of micro cracks, peak strength, porosity, proportion of detrimental minerals, etc. Porosity is reportedly of a devastating impact on the peak strength of igneous rocks. The quartz diorite rock samples in this study were selected from five quarries in Natanz, Iran and subject to microscopic and geomechanical investigations. The level of alteration and the minerals detrimental to the strength of the samples were identified from thin sections. Therefore, the geomechanical tests upon density, porosity, durability index, the Brazilian, and triaxial tests were conducted as per ISRM standards. The findings from microscopic studies reveal that alteration is of more intense impact on rock peak strength compared to that of porosity. The results were compared to standard values and a qualitative correlation between strength and microscopic properties was detected accentuating the importance of microscopic studies on construction stones. The correlation thereupon may be adopted in the exploration, exploitation, and process of construction stones to avoid heavy expenditures and damage to the environment.

Stem Properties of Autobacteria

Directory of Open Access Journals (Sweden)

Boris A. Berdichevskyy

2014-03-01

Full Text Available This paper discusses the stem properties of the autobacteria as part of the activation syndrome and persistence of the endogenous microflora in the adaptation process of the macroorganism to stress, as well as the ability of the bacteria to stimulate the cells of the macroorganism to manifest stem properties. The essence of this syndrome involves testing the tissue with the autobacteria of their "host" body to identify the foci of cellular insolvency with the subsequent inclusion of the autostrains in the implementation phase of the catabolic and anabolic inflammations. Considering the genetic tropism of the microbes to the organ-specific tissue of the area affected, the existence of the stem properties of the autobacteria is assumed to be realized in the process of reparative regeneration. The great clinical significance of further study of this phenomenon is not excluded.

Symptom outcomes important to women with anal incontinence: a conceptual framework.

Science.gov (United States)

Sung, Vivian W; Rogers, Rebecca G; Bann, Carla M; Arya, Lily; Barber, Matthew D; Lowder, Jerry; Lukacz, Emily S; Markland, Alayne; Siddiqui, Nazema; Wilmot, Amanda; Meikle, Susan F

2014-05-01

To develop a framework that describes the most important symptom outcomes for anal incontinence treatment from the patient perspective. A conceptual framework was developed by the Pelvic Floor Disorders Network based on four semistructured focus groups and confirmed in two sets of 10 cognitive interviews including women with anal incontinence. We explored: 1) patient-preferred terminology for describing anal incontinence symptoms; 2) patient definitions of treatment "success"; 3) importance of symptoms and outcomes in the framework; and 4) conceptual gaps (defined as outcomes not previously identified as important). Sessions were conducted according to grounded theory transcribed, coded, and qualitatively and quantitatively analyzed to identify relevant themes. Content and face validity of the framework were further assessed using cognitive interviews. Thirty-four women participated in focus groups and 20 in cognitive interviews. Overall, 29 (54%) were aged 60 years or older, 42 (78%) were white, and 10 (19%) had a high school degree or less. Two overarching outcome themes were identified: "primary bowel leakage symptoms" and "ancillary bowel symptoms." Subdomains important in primary bowel leakage symptoms included leakage characteristics (symptom frequency, amount of leakage, symptom bother) and conditions when bowel leakage occurs (predictability, awareness, urgency). Subdomains important under ancillary bowel symptoms included emptying disorders (constipation, obstructed defecation, and wiping issues) and discomfort (pain, burning). New outcomes identified included predictability, awareness, wiping issues, and discomfort. Women with anal incontinence desire a wide range of symptom outcomes after treatment. These are captured in our conceptual framework, which can aid clinicians and researchers in assessing anal incontinence. LEVEL OF EVIEDENCE: II.

Identifying Important Gaps in Randomized Controlled Trials of Adult Cardiac Arrest Treatments: A Systematic Review of the Published Literature

Science.gov (United States)

Sinha, Shashank S.; Sukul, Devraj; Lazarus, John J.; Polavarapu, Vivek; Chan, Paul S.; Neumar, Robert W.; Nallamothu, Brahmajee K.

2016-01-01

Background Cardiac arrests are a major public health concern worldwide. The extent and types of randomized controlled trials (RCTs) – our most reliable source of clinical evidence – conducted in these high-risk patients over recent years are largely unknown. Methods and Results We performed a systematic review, identifying all RCTs published in PubMed, EMBASE, Scopus, Web of Science, and the Cochrane Library from 1995 to 2014 that focused on acute treatment of non-traumatic cardiac arrest in adults. We then extracted data on the setting of study populations, types and timing of interventions studied, risk of bias, outcomes reported and how these factors have changed over time. Over this twenty-year period, 92 RCTs were published containing 64,309 patients (median, 225.5 per trial). Of these, 81 RCTs (88.0%) involved out-of-hospital cardiac arrest whereas 4 (4.3%) involved in-hospital cardiac arrest and 7 (7.6%) included both. Eighteen RCTs (19.6%) were performed in the U.S., 68 (73.9%) were performed outside the U.S., and 6 (6.5%) were performed in both settings. Thirty-eight RCTs (41.3%) evaluated drug therapy, 39 (42.4%) evaluated device therapy, and 15 (16.3%) evaluated protocol improvements. Seventy-four RCTs (80.4%) examined interventions during the cardiac arrest, 15 (16.3%) examined post-cardiac arrest treatment, and 3 (3.3%) studied both. Overall, reporting of risk of bias was limited. The most common outcome reported was ROSC: 86 (93.5%) with only 22 (23.9%) reporting survival beyond 6 months. Fifty-three RCTs (57.6%) reported global ordinal outcomes whereas 15 (16.3%) reported quality-of-life. RCTs in the last 5 years were more likely to be focused on protocol improvement and post-cardiac arrest care. Conclusions Important gaps in RCTs of cardiac arrest treatments exist, especially those examining in-hospital cardiac arrest, protocol improvement, post-cardiac arrest care, and long-term or quality-of-life outcomes. PMID:27756794

Optical properties of solids

CERN Document Server

Wooten, Frederick

1972-01-01

Optical Properties of Solids covers the important concepts of intrinsic optical properties and photoelectric emission. The book starts by providing an introduction to the fundamental optical spectra of solids. The text then discusses Maxwell's equations and the dielectric function; absorption and dispersion; and the theory of free-electron metals. The quantum mechanical theory of direct and indirect transitions between bands; the applications of dispersion relations; and the derivation of an expression for the dielectric function in the self-consistent field approximation are also encompassed.

Performance testing to identify climate-ready trees

Science.gov (United States)

E.Gregory McPherson; Alison M. Berry; Natalie S. van Doorn

2018-01-01

Urban forests produce ecosystem services that can benefit city dwellers, but are especially vulnerable to climate change stressors such as heat, drought, extreme winds and pests. Tree selection is an important decision point for managers wanting to transition to a more stable and resilient urban forest structure. This study describes a five-step process to identify and...

Physical Properties of Moringa ( Moringa oleifera ) Seeds in relation ...

African Journals Online (AJOL)

Physical properties are very important in the design and manufacturing of processing machines. In this research work, the physical properties of Moringa were determined as design parameters for the development of an oil expeller for the crop. The properties were: length, width, thickness, arithmetic and geometric ...

Estimating Infiltration Rates for a Loessal Silt Loam Using Soil Properties

Science.gov (United States)

M. Dean Knighton

1978-01-01

Soil properties were related to infiltration rates as measured by single-ringsteady-head infiltometers. The properties showing strong simple correlations were identified. Regression models were developed to estimate infiltration rate from several soil properties. The best model gave fair agreement to measured rates at another location.

Physicochemical properties of the liquid mixture between stearate methyl / acid methyl sulfur stearate

Directory of Open Access Journals (Sweden)

Jesús Alfonso Torres Ortega

2008-06-01

Full Text Available The need of new alternatives for advance of the domestic oil-chemical industry, based local natural resources, make use of palm oil (Elaeis guineensis, as a source for obtaining alkyl esters, an excellent alternative development to be explored initially by the research groups at universities or institutions of scientifc innovation and development. The sulfonation process for the manufacture of surfactant were conducted in a falling flm reactor by the absorption and chemical reaction with SO3 gas on methyl esters derived from hydrogenated palm stearin. Identifying the properties of the reactants, products, and its mix is very important for the characterized by gas chromatography and infrared spectroscopy. It presents the properties of these inputs as a result of a series of experiments, which varies the mole ratio of the mixture of reactants and products, the process temperature and the percentage of sulfonate agent in the gas fow.

What makes astronomical heritage valuable? Identifying potential Outstanding Universal Value in cultural properties relating to astronomy

Science.gov (United States)

Cotte, Michel

2016-10-01

This communication presents the situation regarding astronomical and archaeoastronomical heritage related to the World Heritage Convention through recent years up until today. Some parallel events and works were promoted strongly within the IAU-UNESCO Initiative during the International Year of Astronomy (2009). This was followed by a joint program by the IAU and ICOMOS-an official advisory body assisting the World Heritage Committee in the evaluation of nomination dossiers. The result of that work is an important publication by around 40 authors from 20 different countries all around the world: Heritage Sites of Astronomy and Archaeoastronomy in the Context of the UNESCO World Heritage Convention (Ruggles & Cotte 2010). A second volume is under preparation (2015). It was also accompanied by some initiatives such as the ``Windows to the Universe" organisation and the parallel constitution of local ``Starlight Reserves''. Some regional meetings studying specific facets or regional heritage in the field giving significant knowledge progresses also accompanied the global trend for astronomical heritage. WH assessment is defined by a relatively strict format and methodology. A key phrase is ``demonstration of Outstanding Universal Value'' to justify the WH Listing by the Committee. This communication first examines the requirements and evaluation practices about of demonstrating OUV for a given place in the context of astronomical or archaeoastronomical heritage. That means the examination of the tangible attributes, an inventory of the property in terms of immoveable and moveable components and an inventory of intangible issues related to the history (history of the place in the context of the history of astronomy and cultural history). This is also related to the application to the site of the concept of integrity and authenticity, as regards the place itself and in comparison with other similar places (WH sites already listed, sites on national WH Tentative Lists

Important Non-Technical Skills in Video-Assisted Thoracoscopic Surgery Lobectomy

DEFF Research Database (Denmark)

Gjeraa, Kirsten; Mundt, Anna S.; Spanager, Lene

2017-01-01

Background Safety in the operating room is dependent on the team's non-technical skills. The importance of non-technical skills appears to be different for minimally invasive surgery as compared with open surgery. The aim of this study was to identify which non-technical skills are perceived...... with complementary and overlapping scopes of practice between surgical and anesthesia subteams. Conclusions This study identified six non-technical skills that serve as the foundation for shared mental models of the patient, the current situation, and team resources. These findings contribute three important...... by team members to be most important for patient safety, in the setting of video-assisted thoracoscopic surgery (VATS) lobectomy. Methods This was an explorative, semistructured interview-based study with 21 participants from all four thoracic surgery centers in Denmark that perform VATS lobectomy. Data...

A new importance measure for sensitivity analysis

International Nuclear Information System (INIS)

Liu, Qiao; Homma, Toshimitsu

2010-01-01

Uncertainty is an integral part of risk assessment of complex engineering systems, such as nuclear power plants and space crafts. The aim of sensitivity analysis is to identify the contribution of the uncertainty in model inputs to the uncertainty in the model output. In this study, a new importance measure that characterizes the influence of the entire input distribution on the entire output distribution was proposed. It represents the expected deviation of the cumulative distribution function (CDF) of the model output that would be obtained when one input parameter of interest were known. The applicability of this importance measure was tested with two models, a nonlinear nonmonotonic mathematical model and a risk model. In addition, a comparison of this new importance measure with several other importance measures was carried out and the differences between these measures were explained. (author)

An Automated Summarization Assessment Algorithm for Identifying Summarizing Strategies.

Directory of Open Access Journals (Sweden)

Asad Abdi

Full Text Available Summarization is a process to select important information from a source text. Summarizing strategies are the core cognitive processes in summarization activity. Since summarization can be important as a tool to improve comprehension, it has attracted interest of teachers for teaching summary writing through direct instruction. To do this, they need to review and assess the students' summaries and these tasks are very time-consuming. Thus, a computer-assisted assessment can be used to help teachers to conduct this task more effectively.This paper aims to propose an algorithm based on the combination of semantic relations between words and their syntactic composition to identify summarizing strategies employed by students in summary writing. An innovative aspect of our algorithm lies in its ability to identify summarizing strategies at the syntactic and semantic levels. The efficiency of the algorithm is measured in terms of Precision, Recall and F-measure. We then implemented the algorithm for the automated summarization assessment system that can be used to identify the summarizing strategies used by students in summary writing.

Dissection of culture media for embryos: the most important and less important components and characteristics.

Science.gov (United States)

Gardner, David K

2008-01-01

Improvements in culture media formulations have led to an increase in the ability to maintain the mammalian embryo in culture throughout the preimplantation and pre-attachment period. Amino acids and specific macromolecules have been identified as being key medium components, whereas temporal dynamics have been recognised as important media characteristics. Furthermore, other laboratory factors that directly impact embryo development and viability have been identified. Such factors include the use of a reduced oxygen tension, an appropriate incubation system and an adequate prescreening of all contact supplies. With rigourous quality systems in place, it is possible to obtain in vivo rates of embryo development in vitro using new media formulations while maintaining high levels of embryo viability. The future of embryo culture will likely be based on novel culture chips capable of providing temporal dynamics while facilitating real-time analysis of embryo physiology.

Electrical Properties of Sunflower Achenes

Directory of Open Access Journals (Sweden)

Novák Ján

2014-12-01

Full Text Available This work contains the results of measuring the electrical properties of sunflower achenes. The interest in electrical properties of biological materials resulted in engineering research in this field. The results of measurements are used for determining the moisture content, the surface level of liquid and grainy materials, for controlling the presence of pests in grain storage, for the quantitative determination of mechanical damage, in the application of dielectric heating, and in many other areas. Electrical measurements of these materials are of fundamental importance in relation to the analysis of quantity of absorbed water and dielectric heating characteristics. It is a well-known fact that electrical properties of materials, namely dielectric constant and conductivity, are affected by the moisture content of material. This fact is important for the design of many commercial moisturetesting instruments for agricultural products. The knowledge of dielectric properties of materials is necessary for the application of dielectric heating. The aim of this work was to measure conductivity, dielectric constant and loss tangent on samples of sunflower achenes, the electrical properties of which had not been sufficiently measured. Measurements were performed under variable moisture content and the frequency of electric field ranging from 1 MHz to 16 MHz, using a Q meter with coaxial probe. It was concluded that conductivity, dielectric constant and loss tangent increased with increasing moisture content, and dielectric constant and loss tangent decreased as the frequency of electric field increased.

Identifying diabetes-related important protein targets with few interacting partners with the PageRank algorithm.

Science.gov (United States)

Grolmusz, Vince I

2015-04-01

Diabetes is a growing concern for the developed nations worldwide. New genomic, metagenomic and gene-technologic approaches may yield considerable results in the next several years in its early diagnosis, or in advances in therapy and management. In this work, we highlight some human proteins that may serve as new targets in the early diagnosis and therapy. With the help of a very successful mathematical tool for network analysis that formed the basis of the early successes of Google(TM), Inc., we analyse the human protein-protein interaction network gained from the IntAct database with a mathematical algorithm. The novelty of our approach is that the new protein targets suggested do not have many interacting partners (so, they are not hubs or super-hubs), so their inhibition or promotion probably will not have serious side effects. We have identified numerous possible protein targets for diabetes therapy and/or management; some of these have been well known for a long time (these validate our method), some of them appeared in the literature in the last 12 months (these show the cutting edge of the algorithm), and the remainder are still unknown to be connected with diabetes, witnessing completely new hits of the method.

Importance of punching and workability in non-oriented electrical steel sheets

International Nuclear Information System (INIS)

Kurosaki, Yousuke; Mogi, Hisashi; Fujii, Hiroyasu; Kubota, Takeshi; Shiozaki, Morio

2008-01-01

In order to reduce energy loss in motors, the use of high-efficiency non-oriented electrical steel sheets and an optimal motor core design are important. It is also crucial to minimize the deterioration of magnetic properties during the motor core manufacturing process. Accordingly, this report evaluates the effects of cutting and clamping methods on the deterioration factors of motor cores. Magnetic properties are largely influenced by both cutting and clamping methods. While it is difficult to avoid cutting and clamping altogether, it is necessary to adopt suitable production conditions and minimize the deterioration involved

Evaluation of stigmatized properties

Directory of Open Access Journals (Sweden)

Hajnal István

2017-12-01

Full Text Available Stigmatized property is real estate burdened with an external negative effect. Individual cases are spread along a broad spectrum, along many dimensions that include the rational and the irrational, the acute and the chronic. Examples for the stigmatizing effect are a nearby airport, ground water contaminated by chemicals, presence of a high-voltage power line, and so on. Eval­uation of these properties needs special methodology. Stigma can reduce the property’s market value through a particular, multi-layered filter. The author systematically examines the professional literature’s cases of evaluation of stigmatized properties. The research aims to organize and compare the cases in order to calculate the market value of stigmatized properties. Based on the analysis, six significant dimensions are identified. A focus group of 19 experts examined and individually evaluated the stigma­tizing effects along these different dimensions. The author suggests that it is possible to estimate the stigma’s effect and compare different cases to one another effectively. The results allow the international methodology of valu­ation to be processed.

Mapping ash properties using principal components analysis

Science.gov (United States)

Pereira, Paulo; Brevik, Eric; Cerda, Artemi; Ubeda, Xavier; Novara, Agata; Francos, Marcos; Rodrigo-Comino, Jesus; Bogunovic, Igor; Khaledian, Yones

2017-04-01

In post-fire environments ash has important benefits for soils, such as protection and source of nutrients, crucial for vegetation recuperation (Jordan et al., 2016; Pereira et al., 2015a; 2016a,b). The thickness and distribution of ash are fundamental aspects for soil protection (Cerdà and Doerr, 2008; Pereira et al., 2015b) and the severity at which was produced is important for the type and amount of elements that is released in soil solution (Bodi et al., 2014). Ash is very mobile material, and it is important were it will be deposited. Until the first rainfalls are is very mobile. After it, bind in the soil surface and is harder to erode. Mapping ash properties in the immediate period after fire is complex, since it is constantly moving (Pereira et al., 2015b). However, is an important task, since according the amount and type of ash produced we can identify the degree of soil protection and the nutrients that will be dissolved. The objective of this work is to apply to map ash properties (CaCO3, pH, and select extractable elements) using a principal component analysis (PCA) in the immediate period after the fire. Four days after the fire we established a grid in a 9x27 m area and took ash samples every 3 meters for a total of 40 sampling points (Pereira et al., 2017). The PCA identified 5 different factors. Factor 1 identified high loadings in electrical conductivity, calcium, and magnesium and negative with aluminum and iron, while Factor 3 had high positive loadings in total phosphorous and silica. Factor 3 showed high positive loadings in sodium and potassium, factor 4 high negative loadings in CaCO3 and pH, and factor 5 high loadings in sodium and potassium. The experimental variograms of the extracted factors showed that the Gaussian model was the most precise to model factor 1, the linear to model factor 2 and the wave hole effect to model factor 3, 4 and 5. The maps produced confirm the patternd observed in the experimental variograms. Factor 1 and 2

Cheminformatics Modeling of Amine Solutions for Assessing their CO2 Absorption Properties.

Science.gov (United States)

Kuenemann, Melaine A; Fourches, Denis

2017-07-01

As stricter regulations on CO 2 emissions are adopted worldwide, identifying efficient chemical processes to capture and recycle CO 2 is of critical importance for industry. The most common process known as amine scrubbing suffers from the lack of available amine solutions capable of capturing CO 2 efficiently. Tertiary amines characterized by low heats of reaction are considered good candidates but their absorption properties can significantly differ from one analogue to another despite high structural similarity. Herein, after collecting and curating experimental data from the literature, we have built a modeling set of 41 amine structures with their absorption properties. Then we analyzed their chemical composition using molecular descriptors and non-supervised clustering. Furthermore, we developed a series of quantitative structure-property relationships (QSPR) to assess amines' CO 2 absorption properties from their structural characteristics. These models afforded reasonable prediction performances (e. g., Q 2 LOO =0.63 for CO 2 absorption amount) even though they are solely based on 2D chemical descriptors and individual machine learning techniques (random forest and neural network). Overall, we believe the chemical analysis and the series of QSPR models presented in this proof-of-concept study represent new knowledge and innovative tools that could be very useful for screening and prioritizing hypothetical amines to be synthesized and tested experimentally for their CO 2 absorption properties. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

A criterion to identify the equilibration time in lipid bilayer simulations

Directory of Open Access Journals (Sweden)

Rodolfo D. Porasso

2012-11-01

Full Text Available With the aim of establishing a criterion for identifying when a lipid bilayer has reached steady state using the molecular dynamics simulation technique, lipid bilayers of different composition in their liquid crystalline phase were simulated in aqueous solution in presence of CaCl_2 as electrolyte, at different concentration levels. In this regard, we used two different lipid bilayer systems: one composed by 288 DPPC (DiPalmitoylPhosphatidylCholine and another constituted by 288 DPPS (DiPalmitoylPhosphatidylSerine. In this sense, for both type of lipid bilayers, we have studied the temporal evolution of some lipids properties, such as the surface area per lipid, the deuterium order parameter, the lipid hydration and the lipid-calcium coordination. From their analysis, it became evident how each property has a different time to achieve equilibrium. The following order was found, from faster property to slower property: coordination of ions $approx$ deuterium order parameter > area per lipid $approx$ hydration. Consequently, when the hydration of lipids or the mean area per lipid are stable, we can ensure that the lipid membrane has reached the steady state.

Characterization of site-specific biomechanical properties of human meniscus-Importance of collagen and fluid on mechanical nonlinearities.

Science.gov (United States)

Danso, E K; Mäkelä, J T A; Tanska, P; Mononen, M E; Honkanen, J T J; Jurvelin, J S; Töyräs, J; Julkunen, P; Korhonen, R K

2015-06-01

Meniscus adapts to joint loads by depth- and site-specific variations in its composition and structure. However, site-specific mechanical characteristics of intact meniscus under compression are poorly known. In particular, mechanical nonlinearities caused by different meniscal constituents (collagen and fluid) are not known. In the current study, in situ indentation testing was conducted to determine site-specific elastic, viscoelastic and poroelastic properties of intact human menisci. Lateral and medial menisci (n=26) were harvested from the left knee joint of 13 human cadavers. Indentation tests, using stress-relaxation and dynamic (sinusoidal) loading protocols, were conducted for menisci at different sites (anterior, middle, posterior, n=78). Sample- and site-specific axisymmetric finite element models with fibril-reinforced poroelastic properties were fitted to the corresponding stress-relaxation curves to determine the mechanical parameters. Elastic moduli, especially the instantaneous and dynamic moduli, showed site-specific variation only in the medial meniscus (pmeniscus. The phase angle showed no statistically significant variation between the sites (p>0.05). The values for the strain-dependent fibril network modulus (nonlinear behaviour of collagen) were significantly different (pmeniscus only between the middle and posterior sites. For the strain-dependent permeability coefficient, only anterior and middle sites showed a significant difference (pmeniscus. This parameter demonstrated a significant difference (pmeniscus shows more site-dependent variation in the mechanical properties as compared to lateral meniscus. In particular, anterior horn of medial meniscus was the stiffest and showed the most nonlinear mechanical behaviour. The nonlinearity was related to both collagen fibrils and fluid. Copyright © 2015 Elsevier Ltd. All rights reserved.

Instruments Measuring Integrated Care: A Systematic Review of Measurement Properties.

Science.gov (United States)

Bautista, Mary Ann C; Nurjono, Milawaty; Lim, Yee Wei; Dessers, Ezra; Vrijhoef, Hubertus Jm

2016-12-01

Policy Points: Investigations on systematic methodologies for measuring integrated care should coincide with the growing interest in this field of research. A systematic review of instruments provides insights into integrated care measurement, including setting the research agenda for validating available instruments and informing the decision to develop new ones. This study is the first systematic review of instruments measuring integrated care with an evidence synthesis of the measurement properties. We found 209 index instruments measuring different constructs related to integrated care; the strength of evidence on the adequacy of the majority of their measurement properties remained largely unassessed. Integrated care is an important strategy for increasing health system performance. Despite its growing significance, detailed evidence on the measurement properties of integrated care instruments remains vague and limited. Our systematic review aims to provide evidence on the state of the art in measuring integrated care. Our comprehensive systematic review framework builds on the Rainbow Model for Integrated Care (RMIC). We searched MEDLINE/PubMed for published articles on the measurement properties of instruments measuring integrated care and identified eligible articles using a standard set of selection criteria. We assessed the methodological quality of every validation study reported using the COSMIN checklist and extracted data on study and instrument characteristics. We also evaluated the measurement properties of each examined instrument per validation study and provided a best evidence synthesis on the adequacy of measurement properties of the index instruments. From the 300 eligible articles, we assessed the methodological quality of 379 validation studies from which we identified 209 index instruments measuring integrated care constructs. The majority of studies reported on instruments measuring constructs related to care integration (33%) and patient

Instruments Measuring Integrated Care: A Systematic Review of Measurement Properties

Science.gov (United States)

BAUTISTA, MARY ANN C.; NURJONO, MILAWATY; DESSERS, EZRA; VRIJHOEF, HUBERTUS JM

2016-01-01

Policy Points: Investigations on systematic methodologies for measuring integrated care should coincide with the growing interest in this field of research.A systematic review of instruments provides insights into integrated care measurement, including setting the research agenda for validating available instruments and informing the decision to develop new ones.This study is the first systematic review of instruments measuring integrated care with an evidence synthesis of the measurement properties.We found 209 index instruments measuring different constructs related to integrated care; the strength of evidence on the adequacy of the majority of their measurement properties remained largely unassessed. Context Integrated care is an important strategy for increasing health system performance. Despite its growing significance, detailed evidence on the measurement properties of integrated care instruments remains vague and limited. Our systematic review aims to provide evidence on the state of the art in measuring integrated care. Methods Our comprehensive systematic review framework builds on the Rainbow Model for Integrated Care (RMIC). We searched MEDLINE/PubMed for published articles on the measurement properties of instruments measuring integrated care and identified eligible articles using a standard set of selection criteria. We assessed the methodological quality of every validation study reported using the COSMIN checklist and extracted data on study and instrument characteristics. We also evaluated the measurement properties of each examined instrument per validation study and provided a best evidence synthesis on the adequacy of measurement properties of the index instruments. Findings From the 300 eligible articles, we assessed the methodological quality of 379 validation studies from which we identified 209 index instruments measuring integrated care constructs. The majority of studies reported on instruments measuring constructs related to care

Colligations of Prepositions: Essential Properties of Legal Phraseology

Directory of Open Access Journals (Sweden)

Kamariah Yunus

2016-11-01

Full Text Available Specialised discourses manifest the organising thoughts of the discourse community that speaks the language.  They are formed by a series of interrelated linguistic properties that are joined in sentences by small but very important lexico-grammatical properties - colligations of prepositions. This paper reviewed the linguistic properties that constitute these linguistic patterns (colligations of prepositions as well as their semantic and pragmatic functions in legal discourse. The literature reveals that prepositions have both the lexical and grammatical statuses. They are prevalent in legal texts, and they play very important role in conveying the thoughts of the discourse community of the law. Proficient linguistic users are marked by having competence of these patterns. Due to the importance of colligations of prepositions in legal discourse, it is recommended that law students and legal scholars be taught colligations of prepositions explicitly rather than learning them implicitly.

Measurement properties of screening and diagnostic tools for autism spectrum adults of mean normal intelligence: A systematic review.

Science.gov (United States)

Baghdadli, A; Russet, F; Mottron, L

2017-07-01

The autism spectrum (AS) is a multifaceted neurodevelopmental variant associated with lifelong challenges. Despite the relevant importance of identifying AS in adults for epidemiological, public health, and quality of life issues, the measurement properties of the tools currently used to screen and diagnose adults without intellectual disabilities (ID) have not been assessed. This systematic review addresses the accuracy, reliability, and validity of the reported AS screening and diagnostic tools used in adults without ID. Electronic databases and bibliographies were searched, and identified papers evaluated against inclusion criteria. The PRISMA statement was used for reporting the review. We evaluated the quality of the papers using the COSMIN Checklist for psychometric data, and QUADAS-2 for diagnostic data. For the COSMIN assessment, evidence was considered to be strong when several methodologically good articles, or one excellent article, reported consistent evidence for or against a measurement property. For the QUADAS ratings, evidence was considered to be "satisfactory" if at least one study was rated with a low risk of bias and low concern about applicability. We included 38 articles comprising 32 studies, five reviews, and one book chapter and assessed nine tools (three diagnostic and six screening, including eight of their short versions). Among screening tools, only AQ-50, AQ-S, and RAADS-R and RAADS-14 were found to provide satisfactory or intermediate values for their psychometric properties, supported by strong or moderate evidence. Nevertheless, risks of bias and concerns on the applicability of these tools limit the evidence on their diagnostic properties. We found that none of the gold standard diagnostic tools used for children had satisfactory measurement properties. There is limited evidence for the measurement properties of the screening and diagnostic tools used for AS adults with a mean normal range of measured intelligence. This may lessen

Integrated physiological, biochemical and molecular analysis identifies important traits and mechanisms associated with differential response of rice genotypes to elevated temperature

Directory of Open Access Journals (Sweden)

Boghireddy eSailaja

2015-11-01

Full Text Available In changing climate, heat stress caused by high temperature poses a serious threat to rice cultivation. A multiple organizational analysis at physiological, biochemical and molecular level is required to fully understand the impact of elevated temperature in rice. This study was aimed at deciphering the elevated temperature response in eleven popular and mega rice cultivars widely grown in India. Physiological and biochemical traits specifically membrane thermostability (MTS, antioxidants, and photosynthesis were studied at vegetative and reproductive phases which were used to establish a correlation with grain yield under stress. Several useful traits in different genotypes were identified which will be important resource to develop high temperature tolerant rice cultivars. Interestingly, Nagina22 emerged as best performer in terms of yield as well as expression of physiological and biochemical traits at elevated temperature. It showed lesser relative injury, lesser reduction in chlorophyll content, increased super oxide dismutase, catalase and peroxidase activity, lesser reduction in net photosynthetic rate (PN, high transpiration rate (E and other photosynthetic/ fluorescence parameters contributing to least reduction in spikelet fertility and grain yield at elevated temperature. Further, expression of 14 genes including heat shock transcription factors and heat shock proteins was analyzed in Nagina22 (tolerant and Vandana (susceptible at flowering phase, strengthening the fact that N22 performs better at molecular level also during elevated temperature. This study shows that elevated temperature response is complex and involves multiple biological processes which are needed to be characterized to address the challenges of future climate extreme conditions.

Structure and properties of diamond and diamond-like films

Energy Technology Data Exchange (ETDEWEB)

Clausing, R.E. [Oak Ridge National Lab., TN (United States)

1993-01-01

This section is broken into four parts: (1) introduction, (2) natural IIa diamond, (3) importance of structure and composition, and (4) control of structure and properties. Conclusions of this discussion are that properties of chemical vapor deposited diamond films can compare favorably with natural diamond, that properties are anisotropic and are a strong function of structure and crystal perfection, that crystal perfection and morphology are functions of growth conditions and can be controlled, and that the manipulation of texture and thereby surface morphology and internal crystal perfection is an important step in optimizing chemically deposited diamond films for applications.

Thermodynamic properties of cryogenic fluids

CERN Document Server

Leachman, Jacob; Lemmon, Eric; Penoncello, Steven

2017-01-01

This update to a classic reference text provides practising engineers and scientists with accurate thermophysical property data for cryogenic fluids. The equations for fifteen important cryogenic fluids are presented in a basic format, accompanied by pressure-enthalpy and temperature-entropy charts and tables of thermodynamic properties. It begins with a chapter introducing the thermodynamic relations and functional forms for equations of state, and goes on to describe the requirements for thermodynamic property formulations, needed for the complete definition of the thermodynamic properties of a fluid. The core of the book comprises extensive data tables and charts for the most commonly-encountered cryogenic fluids. This new edition sees significant updates to the data presented for air, argon, carbon monoxide, deuterium, ethane, helium, hydrogen, krypton, nitrogen and xenon. The book supports and complements NIST’s REFPROP - an interactive database and tool for the calculation of thermodynamic propertie...

Properties of spatial Cox process models

DEFF Research Database (Denmark)

Møller, Jesper

Probabilistic properties of Cox processes of relevance for statistical modelling and inference are studied. Particularly, we study the most important classes of Cox processes, including log Gaussian Cox processes, shot noise Cox processes, and permanent Cox processes. We consider moment properties...... and point process operations such as thinning, displacements, and superpositioning. We also discuss how to simulate specific Cox processes....

Analysis of aerosol absorption properties and transport over North Africa and the Middle East using AERONET data

Directory of Open Access Journals (Sweden)

A. Farahat

2016-11-01

Full Text Available In this paper particle categorization and absorption properties were discussed to understand transport mechanisms at different geographic locations and possible radiative impacts on climate. The long-term Aerosol Robotic Network (AERONET data set (1999–2015 is used to estimate aerosol optical depth (AOD, single scattering albedo (SSA, and the absorption Ångström exponent (αabs at eight locations in North Africa and the Middle East. Average variation in SSA is calculated at four wavelengths (440, 675, 870, and 1020 nm, and the relationship between aerosol absorption and physical properties is used to infer dominant aerosol types at different locations. It was found that seasonality and geographic location play a major role in identifying dominant aerosol types at each location. Analyzing aerosol characteristics among different sites using AERONET Version 2, Level 2.0 data retrievals and the Hybrid Single Particle Lagrangian Integrated Trajectory model (HYSPLIT backward trajectories shows possible aerosol particle transport among different locations indicating the importance of understanding transport mechanisms in identifying aerosol sources.

Identifying the "Truly Disadvantaged": A Comprehensive Biosocial Approach

Science.gov (United States)

Barnes, J. C.; Beaver, Kevin M.; Connolly, Eric J.; Schwartz, Joseph A.

2016-01-01

There has been significant interest in examining the developmental factors that predispose individuals to chronic criminal offending. This body of research has identified some social-environmental risk factors as potentially important. At the same time, the research producing these results has generally failed to employ genetically sensitive…

Laboratory ultrasonic pulse velocity logging for determination of elastic properties from rock core

Science.gov (United States)

Blacklock, Natalie Erin

During the development of deep underground excavations spalling and rockbursting have been recognized as significant mechanisms of violent brittle failure. In order to predict whether violent brittle failure will occur, it is important to identify the location of stiffness transitions that are associated with geologic structure. One approach to identify the effect of geologic structures is to apply borehole geophysical tools ahead of the tunnel advance. Stiffness transitions can be identified using mechanical property analysis surveys that combine acoustic velocity and density data to calculate acoustic estimates of elastic moduli. However, logistical concerns arise since the approach must be conducted at the advancing tunnel face. As a result, borehole mechanical property analyses are rarely used. Within this context, laboratory ultrasonic pulse velocity testing has been proposed as a potential alternative to borehole mechanical property analysis since moving the analysis to the laboratory would remove logistical constraints and improve safety for the evaluators. In addition to the traditional method of conducting velocity testing along the core axis, two new methodologies for point-focused testing were developed across the core diameter, and indirectly along intact lengths of drill core. The indirect test procedure was implemented in a continuous ultrasonic velocity test program along 573m of drill core to identify key geologic structures that generated transitions in ultrasonic elastic moduli. The test program was successful at identifying the location of geologic contacts, igneous intrusions, faults and shear structures. Ultrasonic values of Young's modulus and bulk modulus were determined at locations of significant velocity transitions to examine the potential for energy storage and energy release. Comparison of results from different ultrasonic velocity test configurations determined that the indirect test configuration provided underestimates for values of

Comparative and bioinformatics analyses of pathogenic bacterial secretomes identified by mass spectrometry in Burkholderia species.

Science.gov (United States)

Nguyen, Thao Thi; Chon, Tae-Soo; Kim, Jaehan; Seo, Young-Su; Heo, Muyoung

2017-07-01

Secreted proteins (secretomes) play crucial roles during bacterial pathogenesis in both plant and human hosts. The identification and characterization of secretomes in the two plant pathogens Burkholderia glumae BGR1 and B. gladioli BSR3, which cause diseases in rice such as seedling blight, panicle blight, and grain rot, are important steps to not only understand the disease-causing mechanisms but also find remedies for the diseases. Here, we identified two datasets of secretomes in B. glumae BGR1 and B. gladioli BSR3, which consist of 118 and 111 proteins, respectively, using mass spectrometry approach and literature curation. Next, we characterized the functional properties, potential secretion pathways and sequence information properties of secretomes of two plant pathogens in a comparative analysis by various computational approaches. The ratio of potential non-classically secreted proteins (NCSPs) to classically secreted proteins (CSPs) in B. glumae BGR1 was greater than that in B. gladioli BSR3. For CSPs, the putative hydrophobic regions (PHRs) which are essential for secretion process of CSPs were screened in detail at their N-terminal sequences using hidden Markov model (HMM)-based method. Total 31 pairs of homologous proteins in two bacterial secretomes were indicated based on the global alignment (identity ≥ 70%). Our results may facilitate the understanding of the species-specific features of secretomes in two plant pathogenic Burkholderia species.

Research on working property and early age mechanical property of self-compacting concrete used in steel-concrete structure

International Nuclear Information System (INIS)

Zhao Yongguang

2013-01-01

Background: Self-compacting concrete that has good working property is the prerequisite of steel-concrete structure. The early age mechanical property of self-compacting concrete is the important parameter when design steel-concrete structure. Purpose: This paper attempts to research the working property and early age mechanical property of self-compacting concrete. Methods: Test is used to research the working property and early age mechanical property of self-compacting concrete. Results: Self-compacting concrete that could meet the requirement of steel-concrete structure has been mixed and parameters of early age mechanical property of self-compacting concrete which is necessary for design of steel-concrete structure have been presented. Conclusions: Base on the results, this paper can guide the construction of self-compacting concrete in steel-concrete structure and the design and construction of steel-concrete structure. (author)

41 CFR 102-2.125 - What source of information can my agency use to identify materials that describe how to do...

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What source of information can my agency use to identify materials that describe how to do business with GSA? 102-2.125 Section 102-2.125 Public Contracts and Property Management Federal Property Management Regulations System...

Thermogravimetric study on the influence of structural, textural and chemical properties of biomass chars on CO2 gasification reactivity

International Nuclear Information System (INIS)

Bouraoui, Zeineb; Jeguirim, Mejdi; Guizani, Chamseddine; Limousy, Lionel; Dupont, Capucine; Gadiou, Roger

2015-01-01

The present investigation aims to examine the influence of textural, structural and chemical properties of biomass chars on the CO 2 gasification rate. Various lignocellulosic biomass chars were prepared under the same conditions. Different analytical techniques were used to determine the char properties such as Scanning Electronic Microscopy, nitrogen adsorption manometry, Raman spectroscopy and X Ray Fluorescence. Gasification tests were carried out in a thermobalance under 20% CO 2 in nitrogen at 800 °C. Significant differences of the total average reactivity were observed with a factor of 2 between the prepared chars. Moreover, different behaviors of gasification rate profiles versus conversion were obtained. This difference of behavior appeared to be correlated with the biomass char properties. Hence, up to 70% of conversion, the gasification rate was shown to depend on the char external surface and the potassium content. At higher conversion ratio, a satisfactory correlation between the Catalytic Index and the average gasification rate was identified. The results highlight the importance of knowing both textural and structural properties and mineral contents of biomass chars to predict fuel reactivity during CO 2 gasification processes. Such behavior prediction is highly important in the gasifiers design for char conversion. - Highlights: • CO 2 gasification reactivity of various lignocellulosic chars were examined. • Chars properties affect strongly samples gasification behavior. • Initial gasification rate is affected by external surface, K content and D3/G ratio. • Gasification rate behavior depends on the Alkali index at high conversion

The importance of charge-transfer interactions in determining chromophoric dissolved organic matter (CDOM) optical and photochemical properties.

Science.gov (United States)

Sharpless, Charles M; Blough, Neil V

2014-04-01

Absorption of sunlight by chromophoric dissolved natural organic matter (CDOM) is environmentally significant because it controls photic zone depth and causes photochemistry that affects elemental cycling and contaminant fate. Both the optics (absorbance and fluorescence) and photochemistry of CDOM display unusual properties that cannot easily be ascribed to a superposition of individual chromophores. These include (i) broad, unstructured absorbance that decreases monotonically well into the visible and near IR, (ii) fluorescence emission spectra that all fall into a single envelope regardless of the excitation wavelength, and (iii) photobleaching and photochemical quantum yields that decrease monotonically with increasing wavelength. In contrast to a simple superposition model, these phenomena and others can be reasonably well explained by a physical model in which charge-transfer interactions between electron donating and accepting chromophores within the CDOM control the optical and photophysical properties. This review summarizes current understanding of the processes underlying CDOM photophysics and photochemistry as well as their physical basis.

Lectures on geometrical properties of nuclei

International Nuclear Information System (INIS)

Myers, W.D.

1975-11-01

Material concerning the geometrical properties of nuclei is drawn from a number of different sources. The leptodermous nature of nuclear density distributions and potential wells is used to draw together the various geometrical properties of these systems and to provide a unified means for their description. Extensive use is made of expansions of radial properties in terms of the surface diffuseness. A strong case is made for the use of convolution as a geometrical ansatz for generating diffuse surface distributions because of the number of simplifications that arise which are of practical importance. 7 figures

Current situation and countermeasures of the defense technology industry intellectual property management

International Nuclear Information System (INIS)

Fan Fei

2014-01-01

In Defense technology industry is a strategic industry of our country, is an important foundation for China to achieve modernization of national defense, is also important driving force of our national economy. Intellectual property plays a very important role in the defense industry ' strengthen the basis of capacity, combining military and civilian, leapfrog development' strategy. Defense-related science, technology and industry advanced nature of intellectual property management and its ownership is a direct reflection of the capability of independent innovation and sustainable development of the defense industry. Therefore, how to make the effective protection and management of intellectual property rights in the Defense Industry has also become a new issue that we face. In this paper, by analyzing the status of the defense technology industry intellectual property management, at home and abroad, and other industry advanced experience in intellectual property management, put forward recommendations to strengthen our national defense science and technology industry intellectual property management. (author)

Finite Element Creep-Fatigue Analysis of a Welded Furnace Roll for Identifying Failure Root Cause

Science.gov (United States)

Yang, Y. P.; Mohr, W. C.

2015-11-01

Creep-fatigue induced failures are often observed in engineering components operating under high temperature and cyclic loading. Understanding the creep-fatigue damage process and identifying failure root cause are very important for preventing such failures and improving the lifetime of engineering components. Finite element analyses including a heat transfer analysis and a creep-fatigue analysis were conducted to model the cyclic thermal and mechanical process of a furnace roll in a continuous hot-dip coating line. Typically, the roll has a short life, modeling heat convection from hot air inside the furnace. The creep-fatigue analysis was performed by inputting the predicted temperature history and applying mechanical loads. The analysis results showed that the failure was resulted from a creep-fatigue mechanism rather than a creep mechanism. The difference of material properties between the filler metal and the base metal is the root cause for the roll failure, which induces higher creep strain and stress in the interface between the weld and the HAZ.

Biologically Important Areas for Cetaceans within U.S. Waters

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Cetacean Density and Distribution Mapping Working Group identified Biologically Important Areas (BIAs) for 24 cetacean species, stocks, or populations in seven...

Chemical and rheological properties of exopolysaccharides produced by four isolates of rhizobia.

Science.gov (United States)

Moretto, Cristiane; Castellane, Tereza Cristina Luque; Lopes, Erica Mendes; Omori, Wellington Pine; Sacco, Laís Postai; Lemos, Eliana Gertrudes de Macedo

2015-11-01

The rheological, physicochemical properties, emulsification and stability of exopolysaccharides (EPSs) from four rhizobia isolates (LBMP-C01, LBMP-C02, LBMP-C03 and LBMP-C04) were studied. The EPS yields of isolates under these experimental conditions were in the range of 1.5-6.63gL(-1). The LBMP-C04 isolate, which presented the highest EPS production (6.63gL(-1)), was isolated from Arachis pintoi and was identified as a Rhizobium sp. strain that could be explored as a possible potential source for the production of extracellular heteropolysaccharides. All polymers showed a pseudoplastic non-Newtonian fluid behavior or shear thinning property in aqueous solutions. Among the four EPS tested against hydrocarbons, EPS LBMP-C01 was found to be more effective against hexane, olive and soybean oils (89.94%, 82.75% and 81.15%, respectively). Importantly, we found that changes in pH (2-11) and salinity (0-30%) influenced the emulsification of diesel oil by the EPSs. EPSLBMP-C04 presented optimal emulsification capacity at pH 10 (E24=53%) and 30% salinity (E24=27%). These findings contribute to the understanding of the influence of the chemical composition, physical properties and biotechnology applications of rhizobial EPS solutions their bioemulsifying properties. Copyright © 2015 Elsevier B.V. All rights reserved.

A Genome-Scale Investigation of How Sequence, Function, and Tree-Based Gene Properties Influence Phylogenetic Inference.

Science.gov (United States)

Shen, Xing-Xing; Salichos, Leonidas; Rokas, Antonis

2016-09-02

Molecular phylogenetic inference is inherently dependent on choices in both methodology and data. Many insightful studies have shown how choices in methodology, such as the model of sequence evolution or optimality criterion used, can strongly influence inference. In contrast, much less is known about the impact of choices in the properties of the data, typically genes, on phylogenetic inference. We investigated the relationships between 52 gene properties (24 sequence-based, 19 function-based, and 9 tree-based) with each other and with three measures of phylogenetic signal in two assembled data sets of 2,832 yeast and 2,002 mammalian genes. We found that most gene properties, such as evolutionary rate (measured through the percent average of pairwise identity across taxa) and total tree length, were highly correlated with each other. Similarly, several gene properties, such as gene alignment length, Guanine-Cytosine content, and the proportion of tree distance on internal branches divided by relative composition variability (treeness/RCV), were strongly correlated with phylogenetic signal. Analysis of partial correlations between gene properties and phylogenetic signal in which gene evolutionary rate and alignment length were simultaneously controlled, showed similar patterns of correlations, albeit weaker in strength. Examination of the relative importance of each gene property on phylogenetic signal identified gene alignment length, alongside with number of parsimony-informative sites and variable sites, as the most important predictors. Interestingly, the subsets of gene properties that optimally predicted phylogenetic signal differed considerably across our three phylogenetic measures and two data sets; however, gene alignment length and RCV were consistently included as predictors of all three phylogenetic measures in both yeasts and mammals. These results suggest that a handful of sequence-based gene properties are reliable predictors of phylogenetic signal

Identifying the Structure and Effect of Drinking-Related Self-Schemas.

Science.gov (United States)

Domenico, Lisa H; Strobbe, Stephen; Stein, Karen Farchaus; Giordani, Bruno J; Hagerty, Bonnie M; Pressler, Susan J

2017-07-01

Self-schemas have received increased attention as favorable targets for therapeutic intervention because of their central role in self-perception and behavior. The purpose of this integrative review was to identify, evaluate, and synthesize existing research pertaining to drinking-related self-schemas. Russell's integrative review strategy guided the search. Sixteen published works were identified, meeting criteria for evaluation ( n = 12 data-based publications and n = 4 models). The retrieved data-based publications rated fair-good using Polit and Beck's criteria; the overall body of literature rated "B" using Grimes and Schulz criteria. Retrieved models rated 4 to 7 using Fitzpatrick and Whall's criteria. The existing literature strongly supports the availability of a drinking-related self-schema among moderate-to-heavy drinking samples, and suggests a positive relationship between elaboration and drinking behavior. The relationship between valenced content of the schema and drinking behavior remains unexplored. Identifying variation in the structural properties of drinking-related self-schemas could lay the foundation for future interventions.

Southeast Atlantic Cloud Properties in a Multivariate Statistical Model - How Relevant is Air Mass History for Local Cloud Properties?

Science.gov (United States)

Fuchs, Julia; Cermak, Jan; Andersen, Hendrik

2017-04-01

This study aims at untangling the impacts of external dynamics and local conditions on cloud properties in the Southeast Atlantic (SEA) by combining satellite and reanalysis data using multivariate statistics. The understanding of clouds and their determinants at different scales is important for constraining the Earth's radiative budget, and thus prominent in climate-system research. In this study, SEA stratocumulus cloud properties are observed not only as the result of local environmental conditions but also as affected by external dynamics and spatial origins of air masses entering the study area. In order to assess to what extent cloud properties are impacted by aerosol concentration, air mass history, and meteorology, a multivariate approach is conducted using satellite observations of aerosol and cloud properties (MODIS, SEVIRI), information on aerosol species composition (MACC) and meteorological context (ERA-Interim reanalysis). To account for the often-neglected but important role of air mass origin, information on air mass history based on HYSPLIT modeling is included in the statistical model. This multivariate approach is intended to lead to a better understanding of the physical processes behind observed stratocumulus cloud properties in the SEA.

Some properties of the computable cross-norm criterion for separability

International Nuclear Information System (INIS)

Rudolph, Oliver

2003-01-01

The computable cross-norm (CCN) criterion is a powerful analytical and computable separability criterion for bipartite quantum states, which is also known to systematically detect bound entanglement. In certain aspects this criterion complements the well-known Peres positive partial transpose (PPT) criterion. In the present paper we study important analytical properties of the CCN criterion. We show that in contrast to the PPT criterion it is not sufficient in dimension 2x2. In higher dimensions, theorems connecting the fidelity of a quantum state with the CCN criterion are proved. We also analyze the behavior of the CCN criterion under local operations and identify the operations that leave it invariant. It turns out that the CCN criterion is in general not invariant under local operations

Fluid-transfer properties of recombinant battery separator media

Energy Technology Data Exchange (ETDEWEB)

Zguris, G.C. [Hollingsworth and Vose, Groton, MA (United States)

2000-05-01

The fluid-transfer properties of the separator play a critical role in both acid- and alkaline-based batteries. These properties are of particular importance in a lead-acid battery since the sulfuric acid is an active component of the battery reaction; the acid is depleted as the battery discharges. In a flooded lead-acid, the function of the separator to deliver acid is less significant than in a valve-regulated design. This paper discusses some issues with regards to this important interaction. (orig.)

A New Approach to Identify Optimal Properties of Shunting Elements for Maximum Damping of Structural Vibration Using Piezoelectric Patches

Science.gov (United States)

Park, Junhong; Palumbo, Daniel L.

2004-01-01

The use of shunted piezoelectric patches in reducing vibration and sound radiation of structures has several advantages over passive viscoelastic elements, e.g., lower weight with increased controllability. The performance of the piezoelectric patches depends on the shunting electronics that are designed to dissipate vibration energy through a resistive element. In past efforts most of the proposed tuning methods were based on modal properties of the structure. In these cases, the tuning applies only to one mode of interest and maximum tuning is limited to invariant points when based on den Hartog's invariant points concept. In this study, a design method based on the wave propagation approach is proposed. Optimal tuning is investigated depending on the dynamic and geometric properties that include effects from boundary conditions and position of the shunted piezoelectric patch relative to the structure. Active filters are proposed as shunting electronics to implement the tuning criteria. The developed tuning methods resulted in superior capabilities in minimizing structural vibration and noise radiation compared to other tuning methods. The tuned circuits are relatively insensitive to changes in modal properties and boundary conditions, and can applied to frequency ranges in which multiple modes have effects.

78 FR 21962 - Federal Property Suitable as Facilities To Assist the Homeless

Science.gov (United States)

2013-04-12

... regarding particular properties identified in this Notice (i.e., acreage, floor plan, existing sanitary.../AVAILABLE PROPERTIES Building Alaska FCC Monitoring Station & Res. Agent's Office 6721 Raspberry Rd...

Some technological properties of phenotypically identified ...

African Journals Online (AJOL)

STORAGESEVER

2009-12-15

Dec 15, 2009 ... found in dairy products, where they may contribute to ripening of the cheese ... tellurite and resistance to heat (60°C for 15 and 30 min) (Holt et al.,. 1994; Manero and .... proteinaceous nature and were eliminated by treatment.

Assessing the relative importance of correlates of loneliness in later life: Gaining insight using recursive partitioning

DEFF Research Database (Denmark)

Ejlskov, Linda; Wulff, Jesper; Bøggild, Henrik

2017-01-01

and demographic correlates were poor identifiers of loneliness. The regression tree suggested that loneliness was not raised among those with poor mental wellbeing if they identified their partner as closest confidante and had frequent social contact. CONCLUSION: Recursive partitioning can identify which......OBJECTIVES: Improving the design and targeting of interventions is important for alleviating loneliness among older adults. This requires identifying which correlates are the most important predictors of loneliness. This study demonstrates the use of recursive partitioning in exploring...... the characteristics and assessing the relative importance of correlates of loneliness in older adults. METHOD: Using exploratory regression trees and random forests, we examined combinations and the relative importance of 42 correlates in relation to loneliness at age 68 among 2453 participants from the birth cohort...

Importance and sensitivity of parameters affecting the Zion Seismic Risk

International Nuclear Information System (INIS)

George, L.L.; O'Connell, W.J.

1985-06-01

This report presents the results of a study on the importance and sensitivity of structures, systems, equipment, components and design parameters used in the Zion Seismic Risk Calculations. This study is part of the Seismic Safety Margins Research Program (SSMRP) supported by the NRC Office of Nuclear Regulatory Research. The objective of this study is to provide the NRC with results on the importance and sensitivity of parameters used to evaluate seismic risk. These results can assist the NRC in making decisions dealing with the allocation of research resources on seismic issues. This study uses marginal analysis in addition to importance and sensitivity analysis to identify subject areas (input parameter areas) for improvements that reduce risk, estimate how much the improvement dfforts reduce risk, and rank the subject areas for improvements. Importance analysis identifies the systems, components, and parameters that are important to risk. Sensitivity analysis estimates the change in risk per unit improvement. Marginal analysis indicates the reduction in risk or uncertainty for improvement effort made in each subject area. The results described in this study were generated using the SEISIM (Systematic Evaluation of Important Safety Improvement Measures) and CHAIN computer codes. Part 1 of the SEISIM computer code generated the failure probabilities and risk values. Part 2 of SEISIM, along with the CHAIN computer code, generated the importance and sensitivity measures

Importance and sensitivity of parameters affecting the Zion Seismic Risk

Energy Technology Data Exchange (ETDEWEB)

George, L.L.; O' Connell, W.J.

1985-06-01

This report presents the results of a study on the importance and sensitivity of structures, systems, equipment, components and design parameters used in the Zion Seismic Risk Calculations. This study is part of the Seismic Safety Margins Research Program (SSMRP) supported by the NRC Office of Nuclear Regulatory Research. The objective of this study is to provide the NRC with results on the importance and sensitivity of parameters used to evaluate seismic risk. These results can assist the NRC in making decisions dealing with the allocation of research resources on seismic issues. This study uses marginal analysis in addition to importance and sensitivity analysis to identify subject areas (input parameter areas) for improvements that reduce risk, estimate how much the improvement dfforts reduce risk, and rank the subject areas for improvements. Importance analysis identifies the systems, components, and parameters that are important to risk. Sensitivity analysis estimates the change in risk per unit improvement. Marginal analysis indicates the reduction in risk or uncertainty for improvement effort made in each subject area. The results described in this study were generated using the SEISIM (Systematic Evaluation of Important Safety Improvement Measures) and CHAIN computer codes. Part 1 of the SEISIM computer code generated the failure probabilities and risk values. Part 2 of SEISIM, along with the CHAIN computer code, generated the importance and sensitivity measures.

Property rights in human gametes in Australia.

Science.gov (United States)

White, Vanessa

2013-03-01

It has long been a basic tenet of the common law that there can be no property interest in human bodies or body parts. However, exceptions to the rule have been recognised from the mid-19th century and developed over time. In the early 21st century, there have been interesting developments in the common law of Australia and England, with Australian Supreme Court judges and the English Court of Appeal casting aside existing exceptions, and finding property rights in human body parts, including gametes, by relying instead on a "rational" and "logical" basis to identify property interests in human body parts.

Geometrical properties of tension-induced fractures in granite

International Nuclear Information System (INIS)

Sato, Hisashi; Sawada, Atsushi; Yasuhara, Hideaki

2011-03-01

Considering a safe, long-term sequestration of energy byproducts such as high level radioactive wastes, it is of significant importance to well-constrain the hydraulic and transport behavior of targeted permeants within fractured rocks. Specifically, fluid flow within low-permeability crystalline rock masses (e.g., granite) is often dominated by transport in through-cutting fractures, and thus careful considerations are needed on the behavior. There are three planes along that granites fail most easily under tension, and those may be identified as the rift, grain, and hardway planes. This anisotropic fabric may be attributed to preferentially oriented microcrack sets contained within intact rock. In this research, geometrical properties of tension-induced fractures are evaluated as listed below; (1) Creation of tension-induced fractures considering the anisotropy clarified by elastic wave measurements. (2) Evaluation of geometrical properties in those fractures characterized by the anisotropy. In the item (1), the three planes of rift, grain and hardway were identified by measuring elastic wave. In the item (2), JRC, variogram, fractal dimension and distributions of elevations in the fracture surfaces were evaluated using digitized data of the fracture surfaces measured via a laser profilometry. Results show that rift planes are less rougher than the other planes of grain and hardway, and grain planes are generically rougher than the other planes of rift and hardway. It was also confirmed that the fracture shape anisotropy was correlated with the direction of the slit which constructed during tensile tests. On the other hand, the tendency peculiar to the direction of slit and granites fail about the estimated aperture distribution from fracture shape was not seen. (author)

Fatigue Properties of Aged Mod. 9Cr-1Mo

International Nuclear Information System (INIS)

Kim, Dae Whan; Kim, Sung Ho; Lee, Chan Bock

2007-01-01

Ferritic/Martensitic steel has a good mechanical properties and a lower thermal expansion coefficient than austenitic stainless steel. Mechanical property of Mod. 9Cr-1Mo steel is less than austenitic stainless steel at high temperature. High temperature mechanical properties are affected by precipitation for Mod. 9Cr-1Mo. FMS steel is used for long time at high temperature and the effect of aging on mechanical properties is very important. In this study, low cycle fatigue properties with aging were investigated

Studies of electrical properties of low-resistivity sandstones based on digital rock technology

Science.gov (United States)

Yan, Weichao; Sun, Jianmeng; Zhang, Jinyan; Yuan, Weiguo; Zhang, Li; Cui, Likai; Dong, Huaimin

2018-02-01

Electrical properties are important parameters to quantitatively calculate water saturation in oil and gas reservoirs by well logging interpretation. It is usual that oil layers show high resistivity responses, while water layers show low-resistivity responses. However, there are low-resistivity oil zones that exist in many oilfields around the world, leading to difficulties for reservoir evaluation. In our research, we used digital rock technology to study different internal and external factors to account for low rock resistivity responses in oil layers. We first constructed three-dimensional digital rock models with five components based on micro-computed tomography technology and x-ray diffraction experimental results, and then oil and water distributions in pores were determined by the pore morphology method. When the resistivity of each component was assigned, rock resistivities were calculated by using the finite element method. We collected 20 sandstone samples to prove the effectiveness of our numerical simulation methods. Based on the control variate method, we studied the effects of different factors on the resistivity indexes and rock resistivities. After sensitivity analyses, we found the main factors which caused low rock resistivities in oil layers. For unfractured rocks, influential factors arranged in descending order of importance were porosity, clay content, temperature, water salinity, heavy mineral, clay type and wettability. In addition, we found that the resistivity index could not provide enough information to identify a low-resistivity oil zone by using laboratory rock-electric experimental results. These results can not only expand our understandings of the electrical properties of low-resistivity rocks from oil layers, but also help identify low-resistivity oil zones better.

Plasma electrolytic oxidation of magnesium and its alloys: Mechanism, properties and applications

Directory of Open Access Journals (Sweden)

Gh. Barati Darband

2017-03-01

Full Text Available Plasma Electrolyte Oxidation (PEO process has increasingly been employed to improve magnesium surface properties by fabrication of an MgO-based coating. Originating from conventional anodizing procedures, this high-voltage process produces an adhesive ceramic film on the surface. The present article provides a comprehensive review around mechanisms of PEO coatings fabrication and their different properties. Due to complexity of PEO coatings formation, a complete explanation regarding fabrication mechanisms of PEO coatings has not yet been proposed; however, the most important advancements in the field of fabrication mechanisms of PEO coatings were gathered in this work. Mechanisms of PEO coatings fabrication on magnesium were reviewed considering voltage–time plots, optical spectrometry, acoustic emission spectrometry and electronic properties of the ceramic film. Afterwards, the coatings properties, affecting parameters and improvement strategies were discussed. In addition, corrosion resistance of coatings, important factors in corrosion resistance and methods for corrosion resistance improvement were considered. Tribological properties (important factors and improvement methods of coatings were also studied. Since magnesium and its alloys are broadly used in biological applications, the biological properties of PEO coatings, important factors in their biological performance and existing methods for improvement of coatings were explained. Addition of ceramic based nanoparticles and formation of nanocomposite coatings may considerably influence properties of plasma electrolyte oxidation coatings. Nanocomposite coatings properties and nanoparticles adsorption mechanisms were included in a separate sector. Another method to improve coatings properties is formation of hybrid coatings on PEO coatings which was discussed in the end.

Characterization of porosity in support of mechanical property analysis

International Nuclear Information System (INIS)

Price, R.H.; Martin, R.J. III; Boyd, P.J.

1992-01-01

Previous laboratory investigations of tuff have shown that porosity has a dominant, general effect on mechanical properties. As a result, it is very important for the interpretation of mechanical property data that porosity is measured on each sample tested. Porosity alone, however, does not address all of the issues important to mechanical behavior. Variability in size and distribution of pore space produces significantly different mechanical properties. A nondestructive technique for characterizing the internal structure of the sample prior to testing is being developed and the results are being analyzed. The information obtained from this technique can help in both qualitative and quantitative interpretation of test results

iNR-PhysChem: a sequence-based predictor for identifying nuclear receptors and their subfamilies via physical-chemical property matrix.

Directory of Open Access Journals (Sweden)

Xuan Xiao

Full Text Available Nuclear receptors (NRs form a family of ligand-activated transcription factors that regulate a wide variety of biological processes, such as homeostasis, reproduction, development, and metabolism. Human genome contains 48 genes encoding NRs. These receptors have become one of the most important targets for therapeutic drug development. According to their different action mechanisms or functions, NRs have been classified into seven subfamilies. With the avalanche of protein sequences generated in the postgenomic age, we are facing the following challenging problems. Given an uncharacterized protein sequence, how can we identify whether it is a nuclear receptor? If it is, what subfamily it belongs to? To address these problems, we developed a predictor called iNR-PhysChem in which the protein samples were expressed by a novel mode of pseudo amino acid composition (PseAAC whose components were derived from a physical-chemical matrix via a series of auto-covariance and cross-covariance transformations. It was observed that the overall success rate achieved by iNR-PhysChem was over 98% in identifying NRs or non-NRs, and over 92% in identifying NRs among the following seven subfamilies: NR1--thyroid hormone like, NR2--HNF4-like, NR3--estrogen like, NR4--nerve growth factor IB-like, NR5--fushi tarazu-F1 like, NR6--germ cell nuclear factor like, and NR0--knirps like. These rates were derived by the jackknife tests on a stringent benchmark dataset in which none of protein sequences included has ≥60% pairwise sequence identity to any other in a same subset. As a user-friendly web-server, iNR-PhysChem is freely accessible to the public at either http://www.jci-bioinfo.cn/iNR-PhysChem or http://icpr.jci.edu.cn/bioinfo/iNR-PhysChem. Also a step-by-step guide is provided on how to use the web-server to get the desired results without the need to follow the complicated mathematics involved in developing the predictor. It is anticipated that iNR-PhysChem may

Identifying workers at risk of sickness absence by questionnaire

NARCIS (Netherlands)

Roelen, Corne A. M.; van der Pol, Tjepke R.; Koopmans, Petra C.; Groothoff, Johan W.

2006-01-01

Background Sickness absence is an important economic problem, because of high costs and lost productivity. Determining factors associated with increased risk of sickness absence may lead to the development of preventive measures. Aims To determine whether self-report questionnaires can identify

Measurement properties of comorbidity indices in maternal health research: a systematic review.

Science.gov (United States)

Aoyama, Kazuyoshi; D'Souza, Rohan; Inada, Eiichi; Lapinsky, Stephen E; Fowler, Robert A

2017-11-13

Maternal critical illness occurs in 1.2 to 4.7 of every 1000 live births in the United States and approximately 1 in 100 women who become critically ill will die. Patient characteristics and comorbid conditions are commonly summarized as an index or score for the purpose of predicting the likelihood of dying; however, most such indices have arisen from non-pregnant patient populations. We sought to systematically review comorbidity indices used in health administrative datasets of pregnant women, in order to critically appraise their measurement properties and recommend optimal tools for clinicians and maternal health researchers. We conducted a systematic search of MEDLINE and EMBASE to identify studies published from 1946 and 1947, respectively, to May 2017 that describe predictive validity of comorbidity indices using health administrative datasets in the field of maternal health research. We applied a methodological PubMed search filter to identify all studies of measurement properties for each index. Our initial search retrieved 8944 citations. The full text of 61 articles were identified and assessed for final eligibility. Finally, two eligible articles, describing three comorbidity indices appropriate for health administrative data remained: The Maternal comorbidity index, the Charlson comorbidity index and the Elixhauser Comorbidity Index. These studies of identified indices had a low risk of bias. The lack of an established consensus-building methodology in generating each index resulted in marginal sensibility for all indices. Only the Maternal Comorbidity Index was derived and validated specifically from a cohort of pregnant and postpartum women, using an administrative dataset, and had an associated c-statistic of 0.675 (95% Confidence Interval 0.647-0.666) in predicting mortality. Only the Maternal Comorbidity Index directly evaluated measurement properties relevant to pregnant women in health administrative datasets; however, it has only modest

On the importance of PURE - Public Understanding of Renewable Energy

Energy Technology Data Exchange (ETDEWEB)

Broman, Lars; Kandpal, Tara C.

2013-09-15

Public understanding of science (PUS) is a central concept among science communicators. Public understanding of renewable energy (PURE) is proposed as an important sub-concept of PUS. The aim of this paper is to interest and invite renewable energy scientists to join a PURE research project. Four separate important questions for a PURE research project can be identified: (A) Is PURE important? (B) Which issues of PURE are the most important ones, according to renewable energy scientists? (C) What understanding of renewable energy has the general public today, worldwide? (D) How to achieve PURE?.

Development of Ad Valorem Real Property Taxation System in Moldova

Directory of Open Access Journals (Sweden)

Olga Buzu

2014-12-01

Full Text Available The author analyzes key aspects of the new ad valorem property taxation (AVT system which is currently implemented in the Republic of Moldova and outlines ways of its further potential development. The author uses both systemic and synergistic approaches to develop a methodology for the assessment of the AVT system efficiency based on the multipurpose cadastre data. The study identifies key characteristics of the AVT system, as well as main problems associated with the implementation of the new property taxation system and with the compatibility of the fiscal and the real property cadastre data, and makes suggestions for further development of the AVT system in the country. The study allows to identify and maximize the benefits of the AVT system.

A manual to identify sources of fluvial sediment

Science.gov (United States)

Gellis, Allen C.; Fitzpatrick, Faith A.; Schubauer-Berigan, Joseph

2016-01-01

Sediment is an important pollutant of concern that can degrade and alter aquatic habitat. A sediment budget is an accounting of the sources, storage, and export of sediment over a defined spatial and temporal scale. This manual focuses on field approaches to estimate a sediment budget. We also highlight the sediment fingerprinting approach to attribute sediment to different watershed sources. Determining the sources and sinks of sediment is important in developing strategies to reduce sediment loads to water bodies impaired by sediment. Therefore, this manual can be used when developing a sediment TMDL requiring identification of sediment sources.The manual takes the user through the seven necessary steps to construct a sediment budget:Decision-making for watershed scale and time period of interestFamiliarization with the watershed by conducting a literature review, compiling background information and maps relevant to study questions, conducting a reconnaissance of the watershedDeveloping partnerships with landowners and jurisdictionsCharacterization of watershed geomorphic settingDevelopment of a sediment budget designData collectionInterpretation and construction of the sediment budgetGenerating products (maps, reports, and presentations) to communicate findings.Sediment budget construction begins with examining the question(s) being asked and whether a sediment budget is necessary to answer these question(s). If undertaking a sediment budget analysis is a viable option, the next step is to define the spatial scale of the watershed and the time scale needed to answer the question(s). Of course, we understand that monetary constraints play a big role in any decision.Early in the sediment budget development process, we suggest getting to know your watershed by conducting a reconnaissance and meeting with local stakeholders. The reconnaissance aids in understanding the geomorphic setting of the watershed and potential sources of sediment. Identifying the potential

Synthesis, crystallographic and magnetic properties of protactinium pnictides

International Nuclear Information System (INIS)

Hery, Yves.

1979-03-01

From a theoretical point of view, protactinium lies in a very important place in the periodic system for it seems to be the first element of the actinide series where the 5f state is occupied. We have studied protactinium pnictides, particularly arsenides and antimonides. PaAs 2 , Pa 3 As 4 , PaSb 2 and Pa 3 Sb 4 were synthetized and their crystallographic properties were determined and discussed. We have measured the magnetic susceptibilities of PaC, PaAs 2 and PaSb 2 . Protactinium exhibits a dual character. In its monocarbide, which is a weakly diamagnet, it behaves as a transition element while in the temperature independent paramagnets PaAs 2 and PaSb 2 , it behaves like a 'f' element. This 'f' element character increases with increasing metal-metal distances. Furthermore the radial expansion of the protactinium 5f orbital seems to be more important than the Uranium one, and consequently the corresponding protactinium 5f electrons are less localized. In addition, some protactinium chalcogenides (βPaS 2 , γPaSe 2 and PaOSe) have been identified [fr

IDENTIFYING COLLISIONAL FAMILIES IN THE KUIPER BELT

International Nuclear Information System (INIS)

Marcus, Robert A.; Ragozzine, Darin; Murray-Clay, Ruth A.; Holman, Matthew J.

2011-01-01

The identification and characterization of numerous collisional families-clusters of bodies with a common collisional origin-in the asteroid belt has added greatly to the understanding of asteroid belt formation and evolution. More recent study has also led to an appreciation of physical processes that had previously been neglected (e.g., the Yarkovsky effect). Collisions have certainly played an important role in the evolution of the Kuiper Belt as well, though only one collisional family has been identified in that region to date, around the dwarf planet Haumea. In this paper, we combine insights into collisional families from numerical simulations with the current observational constraints on the dynamical structure of the Kuiper Belt to investigate the ideal sizes and locations for identifying collisional families. We find that larger progenitors (r ∼ 500 km) result in more easily identifiable families, given the difficulty in identifying fragments of smaller progenitors in magnitude-limited surveys, despite their larger spread and less frequent occurrence. However, even these families do not stand out well from the background. Identifying families as statistical overdensities is much easier than characterizing families by distinguishing individual members from interlopers. Such identification seems promising, provided the background population is well known. In either case, families will also be much easier to study where the background population is small, i.e., at high inclinations. Overall, our results indicate that entirely different techniques for identifying families will be needed for the Kuiper Belt, and we provide some suggestions.

Comprehensive analyses of ventricular myocyte models identify targets exhibiting favorable rate dependence.

Directory of Open Access Journals (Sweden)

Megan A Cummins

2014-03-01

Full Text Available Reverse rate dependence is a problematic property of antiarrhythmic drugs that prolong the cardiac action potential (AP. The prolongation caused by reverse rate dependent agents is greater at slow heart rates, resulting in both reduced arrhythmia suppression at fast rates and increased arrhythmia risk at slow rates. The opposite property, forward rate dependence, would theoretically overcome these parallel problems, yet forward rate dependent (FRD antiarrhythmics remain elusive. Moreover, there is evidence that reverse rate dependence is an intrinsic property of perturbations to the AP. We have addressed the possibility of forward rate dependence by performing a comprehensive analysis of 13 ventricular myocyte models. By simulating populations of myocytes with varying properties and analyzing population results statistically, we simultaneously predicted the rate-dependent effects of changes in multiple model parameters. An average of 40 parameters were tested in each model, and effects on AP duration were assessed at slow (0.2 Hz and fast (2 Hz rates. The analysis identified a variety of FRD ionic current perturbations and generated specific predictions regarding their mechanisms. For instance, an increase in L-type calcium current is FRD when this is accompanied by indirect, rate-dependent changes in slow delayed rectifier potassium current. A comparison of predictions across models identified inward rectifier potassium current and the sodium-potassium pump as the two targets most likely to produce FRD AP prolongation. Finally, a statistical analysis of results from the 13 models demonstrated that models displaying minimal rate-dependent changes in AP shape have little capacity for FRD perturbations, whereas models with large shape changes have considerable FRD potential. This can explain differences between species and between ventricular cell types. Overall, this study provides new insights, both specific and general, into the determinants of

Physical properties of liquid sodium

International Nuclear Information System (INIS)

Alberdi Primicia, J.; Martinez Piquer, T.A.

1977-01-01

The molten sodium has been the more accepted coolant for the first generation of FBR, by this reason the knowledge of its technology is needed for the development of the next LMFBR. A series of necessary data for designing sodium liquid systems are given. Tables and graphics about the most important physical sodium properties between 1200-1400 degC are gathered. The results have been obtained from equations that relate the properties with temperature using a Fortran IV program. (author) [es

From properties to materials: An efficient and simple approach.

Science.gov (United States)

Huwig, Kai; Fan, Chencheng; Springborg, Michael

2017-12-21

We present an inverse-design method, the poor man's materials optimization, that is designed to identify materials within a very large class with optimized values for a pre-chosen property. The method combines an efficient genetic-algorithm-based optimization, an automatic approach for generating modified molecules, a simple approach for calculating the property of interest, and a mathematical formulation of the quantity whose value shall be optimized. In order to illustrate the performance of our approach, we study the properties of organic molecules related to those used in dye-sensitized solar cells, whereby we, for the sake of proof of principle, consider benzene as a simple test system. Using a genetic algorithm, the substituents attached to the organic backbone are varied and the best performing molecules are identified. We consider several properties to describe the performance of organic molecules, including the HOMO-LUMO gap, the sunlight absorption, the spatial distance of the orbitals, and the reorganisation energy. The results show that our method is able to identify a large number of good candidate structures within a short time. In some cases, chemical/physical intuition can be used to rationalize the substitution pattern of the best structures, although this is not always possible. The present investigations provide a solid foundation for dealing with more complex and technically relevant systems such as porphyrins. Furthermore, our "properties first, materials second" approach is not limited to solar-energy harvesting but can be applied to many other fields, as briefly is discussed in the paper.

From properties to materials: An efficient and simple approach

Science.gov (United States)

Huwig, Kai; Fan, Chencheng; Springborg, Michael

2017-12-01

We present an inverse-design method, the poor man's materials optimization, that is designed to identify materials within a very large class with optimized values for a pre-chosen property. The method combines an efficient genetic-algorithm-based optimization, an automatic approach for generating modified molecules, a simple approach for calculating the property of interest, and a mathematical formulation of the quantity whose value shall be optimized. In order to illustrate the performance of our approach, we study the properties of organic molecules related to those used in dye-sensitized solar cells, whereby we, for the sake of proof of principle, consider benzene as a simple test system. Using a genetic algorithm, the substituents attached to the organic backbone are varied and the best performing molecules are identified. We consider several properties to describe the performance of organic molecules, including the HOMO-LUMO gap, the sunlight absorption, the spatial distance of the orbitals, and the reorganisation energy. The results show that our method is able to identify a large number of good candidate structures within a short time. In some cases, chemical/physical intuition can be used to rationalize the substitution pattern of the best structures, although this is not always possible. The present investigations provide a solid foundation for dealing with more complex and technically relevant systems such as porphyrins. Furthermore, our "properties first, materials second" approach is not limited to solar-energy harvesting but can be applied to many other fields, as briefly is discussed in the paper.

Importance of the hexagonal lipid phase in biological membrane organisation

Directory of Open Access Journals (Sweden)

Juliette eJouhet

2013-12-01

Full Text Available Abstract:Domains are present in every natural membrane. They are characterised by a distinctive protein and/or lipid composition. Their size is highly variable from the nano- to the micrometer scale. The domains confer specific properties to the membrane leading to original structure and function. The determinants leading to domain organisation are therefore important but remain obscure. This review presents how the ability of lipids to organize into hexagonal II or lamellar phases can promote particular local structures within membranes. Since biological membranes are composed of a mixture of lipids, each with distinctive biophysical properties, lateral and transversal sorting of lipids can promote creation of domains inside the membrane through local modulation of the lipid phase. Lipid biophysical properties have been characterized for long based on in vitro analyses using non-natural lipid molecules; their re-examinations using natural lipids might open interesting perspectives on membrane architecture occurring in vivo in various cellular and physiological contexts.

Importance of the hexagonal lipid phase in biological membrane organization.

Science.gov (United States)

Jouhet, Juliette

2013-01-01

Domains are present in every natural membrane. They are characterized by a distinctive protein and/or lipid composition. Their size is highly variable from the nano- to the micrometer scale. The domains confer specific properties to the membrane leading to original structure and function. The determinants leading to domain organization are therefore important but remain obscure. This review presents how the ability of lipids to organize into hexagonal II or lamellar phases can promote particular local structures within membranes. Since biological membranes are composed of a mixture of lipids, each with distinctive biophysical properties, lateral and transversal sorting of lipids can promote creation of domains inside the membrane through local modulation of the lipid phase. Lipid biophysical properties have been characterized for long based on in vitro analyses using non-natural lipid molecules; their re-examinations using natural lipids might open interesting perspectives on membrane architecture occurring in vivo in various cellular and physiological contexts.

Intellectual property rights in nanotechnology

International Nuclear Information System (INIS)

Bastani, Behfar; Fernandez, Dennis

2002-01-01

Intellectual property (IP) rights are essential in today's technology-driven age. Building a strategic IP portfolio is economically important from both an offensive and defensive standpoint. After an introduction to intellectual property rights and acquisitions, we provide an overview of current efforts in nanotechnology. Research into nano-scale materials and devices and requirements for their efficient mass production are outlined, with focus on the applicable IP rights and strategies. We present current and future applications of nanotechnology to such fields as electronics, sensors, aerospace, medicine, environment and sanitation, together with the IP rights that can be brought to bear in each. Finally, some challenging issues surrounding the acquisition of intellectual property rights in nanotechnology are presented

Identifying a new particle with jet substructures

International Nuclear Information System (INIS)

Han, Chengcheng; Kim, Doojin; Kim, Minho; Postech, Pohang

2017-01-01

Here, we investigate a potential of determining properties of a new heavy resonance of mass O(1)TeV which decays to collimated jets via heavy Standard Model intermediary states, exploiting jet substructure techniques. Employing the Z gauge boson as a concrete example for the intermediary state, we utilize a "merged jet" defined by a large jet size to capture the two quarks from its decay. The use of the merged jet bene ts the identification of a Z-induced jet as a single, reconstructed object without any combinatorial ambiguity. We also find that jet substructure procedures may enhance features in some kinematic observables formed with subjet four-momenta extracted from a merged jet. This observation motivates us to feed subjet momenta into the matrix elements associated with plausible hypotheses on the nature of the heavy resonance, which are further processed to construct a matrix element method (MEM)-based observable. For both moderately and highly boosted Z bosons, we demonstrate that the MEM in combination with jet substructure techniques can be a very powerful tool for identifying its physical properties. Finally, we discuss effects from choosing different jet sizes for merged jets and jet-grooming parameters upon the MEM analyses.

Relative importance of professional practice and engineering management competencies

Science.gov (United States)

Pons, Dirk

2016-09-01

Problem: The professional practice of engineering always involves engineering management, but it is difficult to know what specifically to include in the undergraduate curriculum. Approach: The population of New Zealand practising engineers was surveyed to determine the importance they placed on specific professional practice and engineering management competencies. Findings: Results show that communication and project planning were the two most important topics, followed by others as identified. The context in which practitioners use communication skills was found to be primarily with project management, with secondary contexts identified. The necessity for engineers to develop the ability to use multiple soft skills in an integrative manner is strongly supported by the data. Originality: This paper is one of only a few large-scale surveys of practising engineers to have explored the soft skill attributes. It makes a didactic contribution of providing a ranked list of topics which can be used for designing the curriculum and prioritising teaching effort, which has not previously been achieved. It yields the new insight that combinations of topics are sometimes more important than individual topics.

Children's Education as the Most Important Savings Goal.

Science.gov (United States)

DeVaney, Sharon A.; Chien, Yi-Wen

2002-01-01

Factors related to the importance of saving for children's education were identified in a study of 1,332 couples from the 1998 Survey of Consumer Finances. Factors included number of children in the household, age and health of head of household, and employment of spouse. (JOW)

Basic properties of semiconductors

CERN Document Server

Landsberg, PT

2013-01-01

Since Volume 1 was published in 1982, the centres of interest in the basic physics of semiconductors have shifted. Volume 1 was called Band Theory and Transport Properties in the first edition, but the subject has broadened to such an extent that Basic Properties is now a more suitable title. Seven chapters have been rewritten by the original authors. However, twelve chapters are essentially new, with the bulk of this work being devoted to important current topics which give this volume an almost encyclopaedic form. The first three chapters discuss various aspects of modern band theory and the

CD271+ osteosarcoma cells display stem-like properties.

Directory of Open Access Journals (Sweden)

Jiguang Tian

Full Text Available Cancer stem cell (CSC theory has been proposed and verified in many cancers. The existence of osteosarcoma CSCs has been confirmed for many years and multiple surface markers have been employed to identify them. In this study, we identified CD271(+ subpopulation of osteosarcoma displaying stem-like properties. CD271, known as the neural crest nerve growth factor receptor, is the marker of bone marrow mesenchymal stem cells (MSCs and human melanoma-initiating cells. We discovered that CD271 was expressed differentially in diverse types of human osteosarcoma and stabilized cell lines. CD271(+ osteosarcoma cells displayed most of the properties of CSC, such as self-renewal, differentiation, drug resistance and tumorigenicity in vivo. Nanog, Oct3/4, STAT3, DNA-PKcs, Bcl-2 and ABCG2 were more expressed in CD271(+ cells compared with CD271- cells. Our study supported the osteosarcoma CSC hypothesis and, to a certain extent, revealed one of the possible mechanisms involved in maintaining CSCs properties.

A decision-oriented measure of uncertainty importance for use in PSA

International Nuclear Information System (INIS)

Poern, Kurt

1997-01-01

For the interpretation of the results of probabilistic risk assessments it is important to have measures which identify the basic events that contribute most to the frequency of the top event but also to identify basic events that are the main contributors to the uncertainty in this frequency. Both types of measures, often called Importance Measure and Measure of Uncertainty Importance, respectively, have been the subject of interest for many researchers in the reliability field. The most frequent mode of uncertainty analysis in connection with probabilistic risk assessment has been to propagate the uncertainty of all model parameters up to an uncertainty distribution for the top event frequency. Various uncertainty importance measures have been proposed in order to point out the parameters that in some sense are the main contributors to the top event distribution. The new measure of uncertainty importance suggested here goes a step further in that it has been developed within a decision theory framework, thereby providing an indication of on what basic event it would be most valuable, from the decision-making point of view, to procure more information

Material properties in complement activation

DEFF Research Database (Denmark)

Moghimi, S. Moein; Andersen, Alina Joukainen; Ahmadvand, Davoud

2011-01-01

activation differently and through different sensing molecules and initiation pathways. The importance of material properties in triggering complement is considered and mechanistic aspects discussed. Mechanistic understanding of complement events could provide rational approaches for improved material design...

Sugarcane trash management assessed by the interaction of yield with soil properties

Directory of Open Access Journals (Sweden)

Flávio Carlos Dalchiavon

2013-12-01

Full Text Available Currently, sugarcane plays an important global role, particularly with a view to alternative energy sources. Thus, in a sugarcane field of the mill Vale do Paraná S/A Álcool e Açúcar, Rubineia, São Paulo State, managed under two green cane harvest systems (cane trash left on and cane trash removed from the soil, Pearson and spatial correlations between the sugarcane yield (variety RB855035 in the third cut and soil physical and chemical properties were studied to identify the property best correlated with stalk yield and the best harvest method. For this purpose, two geostatistical grids (121 sampling points on 1.30 ha were installed on a eutrophic Red Argisol (homogeneous slope of 0.065 m m-1, in 2011, to determine the properties: stalk yield and sugarcane plant population, and soil resistance to penetration, gravimetric moisture, bulk density, and carbon stock, in the layers 0-0.20 and 0.20-0.40 m. The data were analyzed by descriptive, linear correlation and geostatistical analysis. In both treatments, the property stand density was best correlated with sugarcane yield (r = 0.725 in the trash mulching treatment - TM and r = 0.769 in the trash removal treatment - TR. However, in relation to the soil properties, bulk density (0-0.20 m was best correlated (r = 0.305 in TM, r = 0.211 in TR. Similarly, from the spatial point of view, stand density was the property that best explained the sugarcane yield. However, in the TM treatment the density (0.20-0.40 m was the only soil property spatially correlated with stalk yield. The carbon stock in the soil of the TM was 11.5 % higher than in the TR treatment. Results of the TM treatment were best, also with regard to soil management and conservation.

Important projects are being implemented jointly

International Nuclear Information System (INIS)

Medeliene, D.

1998-01-01

Full text: Sweden is continuing its support to Lithuania in the field of nuclear safety. The major current projects include the testing of gap between graphite and pressure tube measuring device, the pressure tube investigation of material properties, content of hydrogen, microstructure, etc., ALS Structure verification using non-destructive testing, Conceptual study on Leak Before Break, Management seminars for VATESI, Multimedia System for the Ignalina NPP's Information Center and Waste management projects. Some of the projects are partially financed by Ignalina NPP. Sweden and Norway provide financing for the extremely important and expensive project - Physical protection: perimeter around the plant. Two new EC projects, Continuation of support to VATESI: licensing, inservice and decommissioning, and Phare TSO project to help building up TSO competence in Lithuania are no less important. In the beginning of September a functional exercise was organised with the Ignalina NPP emergency preparedness Information unit. This exercise was the second one of the two to prepare the personnel for the problems they have to solve in communication with public and media in the case of an accident at the Ignalina NPP

Hardrock Elastic Physical Properties: Birch's Seismic Parameter Revisited

Science.gov (United States)

Wu, M.; Milkereit, B.

2014-12-01

Identifying rock composition and properties is imperative in a variety of fields including geotechnical engineering, mining, and petroleum exploration, in order to accurately make any petrophysical calculations. Density is, in particular, an important parameter that allows us to differentiate between lithologies and estimate or calculate other petrophysical properties. It is well established that compressional and shear wave velocities of common crystalline rocks increase with increasing densities (i.e. the Birch and Nafe-Drake relationships). Conventional empirical relations do not take into account S-wave velocity. Physical properties of Fe-oxides and massive sulfides, however, differ significantly from the empirical velocity-density relationships. Currently, acquiring in-situ density data is challenging and problematic, and therefore, developing an approximation for density based on seismic wave velocity and elastic moduli would be beneficial. With the goal of finding other possible or better relationships between density and the elastic moduli, a database of density, P-wave velocity, S-wave velocity, bulk modulus, shear modulus, Young's modulus, and Poisson's ratio was compiled based on a multitude of lab samples. The database is comprised of isotropic, non-porous metamorphic rock. Multi-parameter cross plots of the various elastic parameters have been analyzed in order to find a suitable parameter combination that reduces high density outliers. As expected, the P-wave velocity to S-wave velocity ratios show no correlation with density. However, Birch's seismic parameter, along with the bulk modulus, shows promise in providing a link between observed compressional and shear wave velocities and rock densities, including massive sulfides and Fe-oxides.

The node-weighted Steiner tree approach to identify elements of cancer-related signaling pathways.

Science.gov (United States)

Sun, Yahui; Ma, Chenkai; Halgamuge, Saman

2017-12-28

Cancer constitutes a momentous health burden in our society. Critical information on cancer may be hidden in its signaling pathways. However, even though a large amount of money has been spent on cancer research, some critical information on cancer-related signaling pathways still remains elusive. Hence, new works towards a complete understanding of cancer-related signaling pathways will greatly benefit the prevention, diagnosis, and treatment of cancer. We propose the node-weighted Steiner tree approach to identify important elements of cancer-related signaling pathways at the level of proteins. This new approach has advantages over previous approaches since it is fast in processing large protein-protein interaction networks. We apply this new approach to identify important elements of two well-known cancer-related signaling pathways: PI3K/Akt and MAPK. First, we generate a node-weighted protein-protein interaction network using protein and signaling pathway data. Second, we modify and use two preprocessing techniques and a state-of-the-art Steiner tree algorithm to identify a subnetwork in the generated network. Third, we propose two new metrics to select important elements from this subnetwork. On a commonly used personal computer, this new approach takes less than 2 s to identify the important elements of PI3K/Akt and MAPK signaling pathways in a large node-weighted protein-protein interaction network with 16,843 vertices and 1,736,922 edges. We further analyze and demonstrate the significance of these identified elements to cancer signal transduction by exploring previously reported experimental evidences. Our node-weighted Steiner tree approach is shown to be both fast and effective to identify important elements of cancer-related signaling pathways. Furthermore, it may provide new perspectives into the identification of signaling pathways for other human diseases.

Biosphere dose conversion Factor Importance and Sensitivity Analysis

International Nuclear Information System (INIS)

M. Wasiolek

2004-01-01

This report presents importance and sensitivity analysis for the environmental radiation model for Yucca Mountain, Nevada (ERMYN). ERMYN is a biosphere model supporting the total system performance assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis concerns the output of the model, biosphere dose conversion factors (BDCFs) for the groundwater, and the volcanic ash exposure scenarios. It identifies important processes and parameters that influence the BDCF values and distributions, enhances understanding of the relative importance of the physical and environmental processes on the outcome of the biosphere model, includes a detailed pathway analysis for key radionuclides, and evaluates the appropriateness of selected parameter values that are not site-specific or have large uncertainty

41 CFR 102-75.340 - Where hazardous substance activity has been identified on property proposed for disposal, what...

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Where hazardous... Provisions Relating to Hazardous Substance Activity § 102-75.340 Where hazardous substance activity has been... offer to purchase and the conveyance document? Where the existence of hazardous substance activity has...

A review of the impacts of degradation threats on soil properties in the UK.

Science.gov (United States)

Gregory, A S; Ritz, K; McGrath, S P; Quinton, J N; Goulding, K W T; Jones, R J A; Harris, J A; Bol, R; Wallace, P; Pilgrim, E S; Whitmore, A P

2015-10-01

National governments are becoming increasingly aware of the importance of their soil resources and are shaping strategies accordingly. Implicit in any such strategy is that degradation threats and their potential effect on important soil properties and functions are defined and understood. In this paper, we aimed to review the principal degradation threats on important soil properties in the UK, seeking quantitative data where possible. Soil erosion results in the removal of important topsoil and, with it, nutrients, C and porosity. A decline in soil organic matter principally affects soil biological and microbiological properties, but also impacts on soil physical properties because of the link with soil structure. Soil contamination affects soil chemical properties, affecting nutrient availability and degrading microbial properties, whilst soil compaction degrades the soil pore network. Soil sealing removes the link between the soil and most of the 'spheres', significantly affecting hydrological and microbial functions, and soils on re-developed brownfield sites are typically degraded in most soil properties. Having synthesized the literature on the impact on soil properties, we discuss potential subsequent impacts on the important soil functions, including food and fibre production, storage of water and C, support for biodiversity, and protection of cultural and archaeological heritage. Looking forward, we suggest a twin approach of field-based monitoring supported by controlled laboratory experimentation to improve our mechanistic understanding of soils. This would enable us to better predict future impacts of degradation processes, including climate change, on soil properties and functions so that we may manage soil resources sustainably.

Born to roam? Surveying cat owners in Tasmania, Australia, to identify the drivers and barriers to cat containment.

Science.gov (United States)

McLeod, Lynette J; Hine, Donald W; Bengsen, Andrew J

2015-12-01

Free-roaming domestic cats, Felis catus, are a major public nuisance in neighbourhoods across the world, and have been linked to biodiversity loss and a host of community health problems. Owners who let their cats roam, also place their cats at risk of serious injury. One management strategy that is gaining considerable support involves encouraging cat owners to contain their pets within their property. Contemporary behaviour change models highlight the importance of identifying drivers and barriers that encourage and discourage target behaviours such as cat containment. Results from a random dial phone survey of 356 cat owners in northern Tasmania identified four distinct cat containment profiles: owners who contained their cat all the time, owners who only contained their cat at night, owners who sporadically contained their cat with no set routine, and owners who made no attempt to contain their pet. Our results indicated that cat-owners' decisions to contain or not contain their cats were guided by a range of factors including owners' beliefs about their ability to implement an effective containment strategy and their views about the physical and psychological needs of their cats. The results are discussed in terms of improving the behavioural effectiveness of cat containment interventions by selecting appropriate behavioural change tools for the identified drivers and barriers, and developing targeted engagement strategies and messaging. Copyright © 2015 Elsevier B.V. All rights reserved.

Phenomena and parameters important to burnup credit

International Nuclear Information System (INIS)

Parks, C.V.; Dehart, M.D.; Wagner, J.C.

2001-01-01

Since the mid-1980s, a significant number of studies have been directed at understanding the phenomena and parameters important to implementation of burnup credit in out-of-reactor applications involving pressurized-water- reactor (PWR) spent fuel. The efforts directed at burnup credit involving boiling-water-reactor (BWR) spent fuel have been more limited. This paper reviews the knowledge and experience gained from work performed in the United States and other countries in the study of burnup credit. Relevant physics and analysis phenomenon are identified, and an assessment of their importance to burnup credit implementation for transport and dry cask storage is given. (author)

Tensile Properties Characterization of AlSi10Mg Parts Produced by Direct Metal Laser Sintering via Nested Effects Modeling.

Science.gov (United States)

Palumbo, Biagio; Del Re, Francesco; Martorelli, Massimo; Lanzotti, Antonio; Corrado, Pasquale

2017-02-08

A statistical approach for the characterization of Additive Manufacturing (AM) processes is presented in this paper. Design of Experiments (DOE) and ANalysis of VAriance (ANOVA), both based on Nested Effects Modeling (NEM) technique, are adopted to assess the effect of different laser exposure strategies on physical and mechanical properties of AlSi10Mg parts produced by Direct Metal Laser Sintering (DMLS). Due to the wide industrial interest in AM technologies in many different fields, it is extremely important to ensure high parts performances and productivity. For this aim, the present paper focuses on the evaluation of tensile properties of specimens built with different laser exposure strategies. Two optimal laser parameters settings, in terms of both process quality (part performances) and productivity (part build rate), are identified.

The Survey of Treatment Entry Pressures (STEP): identifying client's reasons for entering substance abuse treatment.

Science.gov (United States)

Dugosh, Karen Leggett; Festinger, David S; Lynch, Kevin G; Marlowe, Douglas B

2014-10-01

Systematically identifying reasons that clients enter substance abuse treatment may allow clinicians to immediately focus on issues of greatest relevance to the individual and enhance treatment engagement. We developed the Survey of Treatment Entry Pressures (STEP) to identify the specific factors that precipitated an individual's treatment entry. The instrument contains 121 items from 6 psychosocial domains (i.e., family, financial, social, medical, psychiatric, legal). The current study examined the STEP's psychometric properties. A total of 761 participants from various treatment settings and modalities completed the STEP prior to treatment admission and 4-7 days later. Analyses were performed to examine the instrument's psychometric properties including item response rates, test-retest reliability, internal consistency, and factor structure. The items displayed adequate test-retest reliability and internal consistency within each psychosocial domain. Generally, results from exploratory and confirmatory factor analyses support a 2-factor structure reflecting type of reinforcement schedule. The study provides preliminary support for the psychometric properties of the STEP. The STEP may provide a reliable way for clinicians to characterize and capitalize on a client's treatment motivation early on which may serve to improve treatment retention and therapeutic outcomes. © 2014 Wiley Periodicals, Inc.

Importance of gradients in membrane properties and electrical coupling in sinoatrial node pacing.

Directory of Open Access Journals (Sweden)

Shin Inada

Full Text Available The sinoatrial node (SAN is heterogeneous in terms of cell size, ion channels, current densities, connexins and electrical coupling. For example, Nav1.5 (responsible for INa and Cx43 (responsible for electrical coupling are absent from the centre of the SAN (normally the leading pacemaker site, but present in the periphery (at SAN-atrial muscle junction. To test whether the heterogeneity is important for the functioning of the SAN, one- and two-dimensional models of the SAN and surrounding atrial muscle were created. Normal functioning of the SAN (in terms of cycle length, position of leading pacemaker site, conduction times, activation and repolarization sequences and space constants was observed when, from the centre to the periphery, (i cell characteristics (cell size and ionic current densities were changed in a gradient fashion from a central-type (lacking INa to a peripheral-type (possessing INa and (ii coupling conductance was increased in a gradient fashion. We conclude that the heterogeneous nature of the node is important for its normal functioning. The presence of Nav1.5 and Cx43 in the periphery may be essential for the node to be able to drive the atrial muscle: Nav1.5 provides the necessary depolarizing current and Cx43 delivers it to the atrial muscle.

SitesIdentify: a protein functional site prediction tool

Directory of Open Access Journals (Sweden)

Doig Andrew J

2009-11-01

Full Text Available Abstract Background The rate of protein structures being deposited in the Protein Data Bank surpasses the capacity to experimentally characterise them and therefore computational methods to analyse these structures have become increasingly important. Identifying the region of the protein most likely to be involved in function is useful in order to gain information about its potential role. There are many available approaches to predict functional site, but many are not made available via a publicly-accessible application. Results Here we present a functional site prediction tool (SitesIdentify, based on combining sequence conservation information with geometry-based cleft identification, that is freely available via a web-server. We have shown that SitesIdentify compares favourably to other functional site prediction tools in a comparison of seven methods on a non-redundant set of 237 enzymes with annotated active sites. Conclusion SitesIdentify is able to produce comparable accuracy in predicting functional sites to its closest available counterpart, but in addition achieves improved accuracy for proteins with few characterised homologues. SitesIdentify is available via a webserver at http://www.manchester.ac.uk/bioinformatics/sitesidentify/

Identifying Relevant Studies in Software Engineering

DEFF Research Database (Denmark)

Zhang, He; Ali Babar, Muhammad; Tell, Paolo

2011-01-01

Context: Systematic literature review (SLR) has become an important research methodology in software engineering since the introduction of evidence-based software engineering (EBSE) in 2004. One critical step in applying this methodology is to design and execute appropriate and effective search....... Objective: The main objective of the research reported in this paper is to improve the search step of undertaking SLRs in software engineering (SE) by devising and evaluating systematic and practical approaches to identifying relevant studies in SE. Method: We have systematically selected and analytically...

31 CFR 545.205 - Prohibited importation of goods, software, technology, or services.

Science.gov (United States)

2010-07-01

..., software, technology, or services. 545.205 Section 545.205 Money and Finance: Treasury Regulations Relating..., software, technology, or services owned or controlled by the Taliban or persons whose property or interests... (AFGHANISTAN) SANCTIONS REGULATIONS Prohibitions § 545.205 Prohibited importation of goods, software...

Role of Pediatric Emergency Physicians in Identifying Bullying.

Science.gov (United States)

Waseem, Muhammad; Paul, Audrey; Schwartz, Gerald; Pauzé, Denis; Eakin, Paul; Barata, Isabel; Holtzman, Doug; Benjamin, Lee S; Wright, Joseph L; Nickerson, Amanda B; Joseph, Madeline

2017-02-01

Bullying is an important public health issue with broad implications. Although this issue has been studied extensively, there is limited emergency medicine literature addressing bullying. The emergency department (ED) physician has a unique opportunity to identify children and adolescents that are victims of bullying, and make a difference in their lives. Our aim is to discuss the role of the emergency physician (EP) in identifying patients who have been victims of bullying and how to provide effective management as well as referral for further resources. This document provides a framework for recognizing, stabilizing, and managing children who have experienced bullying. With the advent of social media, bullying behavior is not limited to in-person situations, and often occurs via electronic communication, further complicating recognition because it may not impart any physical harm to the child. Recognition of bullying requires a high level of suspicion, as patients may not offer this history. After the stabilization of any acute or overt indications of physical injury, along with obtaining a history of the mechanism of injury, the EP has the opportunity to identify the existence of bullying as the cause of the injury, and can address the issue in the ED while collaborating with "physician-extenders," such as social workers, toward identifying local resources for further support. The ED is an important arena for the assessment and management of children who have experienced bullying. It is imperative that EPs on the front lines of patient care address this public health epidemic. They have the opportunity to exert a positive impact on the lives of the children and families who are the victims of bullying. Copyright © 2016 Elsevier Inc. All rights reserved.

Use of importance measures in risk-informed regulatory applications

International Nuclear Information System (INIS)

Cheok, Michael C.; Parry, Gareth W.; Sherry, Richard R.

1998-01-01

The use of importance measures to analyze PRA results is discussed. Commonly used importance measures are defined. Some issues that have been identified as potentially limiting their usefulness are addressed, namely: there is no simple relationship between importance measures evaluated at the single component level and those evaluated at the level of a group of components, and, as a result, some of the commonly used importance measures are not realistic measures of the sensitivity of the overall risk to parameter value changes; and, importance measures do not typically take into account parameter uncertainties which raises the question of the robustness of conclusions drawn from importance analyses. The issues are explored in the context of both ranking and categorization of structures, systems, and components (SSCs) with respect to risk-significance and safety-significance for use in risk-informed regulatory analyses

Sources of variability in canopy reflectance and the convergent properties of plants.

Science.gov (United States)

Ollinger, S V

2011-01-01

How plants interact with sunlight is central to the existence of life and provides a window to the functioning of ecosystems. Although the basic properties of leaf spectra have been known for decades, interpreting canopy-level spectra is more challenging because leaf-level effects are complicated by a host of stem- and canopy-level traits. Progress has been made through empirical analyses and models, although both methods have been hampered by a series of persistent challenges. Here, I review current understanding of plant spectral properties with respect to sources of uncertainty at leaf to canopy scales. I also discuss the role of evolutionary convergence in plant functioning and the difficulty of identifying individual properties among a suite of interrelated traits. A pattern that emerges suggests a synergy among the scattering effects of leaf-, stem- and canopy-level traits that becomes most apparent in the near-infrared (NIR) region. This explains the widespread and well-known importance of the NIR region in vegetation remote sensing, but presents an interesting paradox that has yet to be fully explored: that we can often gain more insight about the functioning of plants by examining wavelengths that are not used in photosynthesis than by examining those that are. © 2010 The Author. New Phytologist © 2010 New Phytologist Trust.