Genes Important for Schizosaccharomyces pombe Meiosis Identified Through a Functional Genomics Screen

Science.gov (United States)

Blyth, Julie; Makrantoni, Vasso; Barton, Rachael E.; Spanos, Christos; Rappsilber, Juri; Marston, Adele L.

2018-01-01

Meiosis is a specialized cell division that generates gametes, such as eggs and sperm. Errors in meiosis result in miscarriages and are the leading cause of birth defects; however, the molecular origins of these defects remain unknown. Studies in model organisms are beginning to identify the genes and pathways important for meiosis, but the parts list is still poorly defined. Here we present a comprehensive catalog of genes important for meiosis in the fission yeast, Schizosaccharomyces pombe. Our genome-wide functional screen surveyed all nonessential genes for roles in chromosome segregation and spore formation. Novel genes important at distinct stages of the meiotic chromosome segregation and differentiation program were identified. Preliminary characterization implicated three of these genes in centrosome/spindle pole body, centromere, and cohesion function. Our findings represent a near-complete parts list of genes important for meiosis in fission yeast, providing a valuable resource to advance our molecular understanding of meiosis. PMID:29259000

Methodology for identifying boundaries of systems important to safety in CANDU nuclear power plants

International Nuclear Information System (INIS)

Therrien, S.; Komljenovic, D.; Therrien, P.; Ruest, C.; Prevost, P.; Vaillancourt, R.

2007-01-01

This paper presents a methodology developed to identify the boundaries of the systems important to safety (SIS) at the Gentilly-2 Nuclear Power Plant (NPP), Hydro-Quebec. The SIS boundaries identification considers nuclear safety only. Components that are not identified as important to safety are systematically identified as related to safety. A global assessment process such as WANO/INPO AP-913 'Equipment Reliability Process' will be needed to implement adequate changes in the management rules of those components. The paper depicts results in applying the methodology to the Shutdown Systems 1 and 2 (SDS 1, 2), and to the Emergency Core Cooling System (ECCS). This validation process enabled fine tuning the methodology, performing a better estimate of the effort required to evaluate a system, and identifying components important to safety of these systems. (author)

Importance of safety review to the safe operation of a nuclear plant

International Nuclear Information System (INIS)

Brinkerhoff, L.C.

1978-01-01

Widely differing standards of construction of nuclear reactors are employed in different countries. Although the reactor vendors, including designers and construction contractors, have a vested interest in safety, the ultimate responsibility for safety rests with the reactor facility operator. Even though governmental agencies, either directly or indirectly, must take a strong lead in developing policies and practices of safe operation, the reactor facility operator must recognize and accept the full responsibility for safe operation of the facility. The policies and practices of safe operation imposed by governmental agencies must help assure the prudent operation and the adequate maintenance of those structures, systems, and components of importance to safety. Since each country has a slightly different philosophy for achieving safety and each vendor utilizes different structures, systems, and components to fulfil this philosophy, it is imperative that the facility operator adequately maintain those engineered safety features and those plant protective systems which have been engineered into achieving the desired levels of safety. An additional method of helping to assure that those structures, systems, and components of importance to safety are prudently operated and adequately maintained is to assign the full safety responsibility for the overall operations of the reactor facility to the operating organization, i.e. assigning a 'line of responsibility' within the reactor facility operator. This assurance can be further strengthened by requiring that the facility operator establish a safety review body that overviews the operation and assures that the operating organization complies with those policies and practices of safe operation which have been imposed on the reactor facility. (author)

Active Learning with Rationales for Identifying Operationally Significant Anomalies in Aviation

Science.gov (United States)

Sharma, Manali; Das, Kamalika; Bilgic, Mustafa; Matthews, Bryan; Nielsen, David Lynn; Oza, Nikunj C.

2016-01-01

A major focus of the commercial aviation community is discovery of unknown safety events in flight operations data. Data-driven unsupervised anomaly detection methods are better at capturing unknown safety events compared to rule-based methods which only look for known violations. However, not all statistical anomalies that are discovered by these unsupervised anomaly detection methods are operationally significant (e.g., represent a safety concern). Subject Matter Experts (SMEs) have to spend significant time reviewing these statistical anomalies individually to identify a few operationally significant ones. In this paper we propose an active learning algorithm that incorporates SME feedback in the form of rationales to build a classifier that can distinguish between uninteresting and operationally significant anomalies. Experimental evaluation on real aviation data shows that our approach improves detection of operationally significant events by as much as 75% compared to the state-of-the-art. The learnt classifier also generalizes well to additional validation data sets.

The importance for nuclear safety of efficient feedback of operational experience

International Nuclear Information System (INIS)

1987-09-01

Experience of practical operation is a valuable source of information for improving and optimizing the safety and reliability of nuclear power plants. Therefore it is essential to collect information on abnormal events occurring at plants during operation and on all deviations from normal performance by systems and personnel that could be precursors of accidents. For this purpose it is necessary to establish hierarchical systems to feedback operational safety experience at utility, national and international levels and to make these systems as effective as possible. The present report attempts to identify the safety objectives of these systems, to analyse the difficulties presently encountered and to suggest possible improvements

Importance Of Penetration Testing For Legacy Operating System

Directory of Open Access Journals (Sweden)

Poorvi Bhatt

2017-12-01

Full Text Available Penetration testing is very important technique to find vulnerabilities in commercial networks. There are various techniques for ethical hacking via penetration testing. This report explains a white hat hacker approach of penetration testing. I have performed this test on private network where three PCs are connected through LAN via switch and without firewall. This network is not connected with Internet. All the PCs have windows operating system. The attacker host has windows server 2003 with Service Pack1 second host has windows XP with Service Pack 2 and third host has windows 2000 with service pack 4.

Buyer-focused operations as a supply chain strategy : Identifying the influence of business characteristics

NARCIS (Netherlands)

van der Vaart, T; van Donk, DP

2006-01-01

Purpose - Buyer-focused operations aim at a high level of supply chain alignment by singling out resources for one buyer in order to serve this buyer optimally. The purpose of this paper is to identify what business characteristics make suppliers choose buyer-focused operations as a supply chain

Prediction of chronic post-operative pain: pre-operative DNIC testing identifies patients at risk.

Science.gov (United States)

Yarnitsky, David; Crispel, Yonathan; Eisenberg, Elon; Granovsky, Yelena; Ben-Nun, Alon; Sprecher, Elliot; Best, Lael-Anson; Granot, Michal

2008-08-15

Surgical and medical procedures, mainly those associated with nerve injuries, may lead to chronic persistent pain. Currently, one cannot predict which patients undergoing such procedures are 'at risk' to develop chronic pain. We hypothesized that the endogenous analgesia system is key to determining the pattern of handling noxious events, and therefore testing diffuse noxious inhibitory control (DNIC) will predict susceptibility to develop chronic post-thoracotomy pain (CPTP). Pre-operative psychophysical tests, including DNIC assessment (pain reduction during exposure to another noxious stimulus at remote body area), were conducted in 62 patients, who were followed 29.0+/-16.9 weeks after thoracotomy. Logistic regression revealed that pre-operatively assessed DNIC efficiency and acute post-operative pain intensity were two independent predictors for CPTP. Efficient DNIC predicted lower risk of CPTP, with OR 0.52 (0.33-0.77 95% CI, p=0.0024), i.e., a 10-point numerical pain scale (NPS) reduction halves the chance to develop chronic pain. Higher acute pain intensity indicated OR of 1.80 (1.28-2.77, p=0.0024) predicting nearly a double chance to develop chronic pain for each 10-point increase. The other psychophysical measures, pain thresholds and supra-threshold pain magnitudes, did not predict CPTP. For prediction of acute post-operative pain intensity, DNIC efficiency was not found significant. Effectiveness of the endogenous analgesia system obtained at a pain-free state, therefore, seems to reflect the individual's ability to tackle noxious events, identifying patients 'at risk' to develop post-intervention chronic pain. Applying this diagnostic approach before procedures that might generate pain may allow individually tailored pain prevention and management, which may substantially reduce suffering.

Identifying important motivational factors for professionals in Greek hospitals

Science.gov (United States)

Kontodimopoulos, Nick; Paleologou, Victoria; Niakas, Dimitris

2009-01-01

Background The purpose of this study was to identify important motivational factors according to the views of health-care professionals in Greek hospitals and particularly to determine if these might differ in the public and private sectors. Methods A previously developed -and validated- instrument addressing four work-related motivators (job attributes, remuneration, co-workers and achievements) was used. Three categories of health care professionals, doctors (N = 354), nurses (N = 581) and office workers (N = 418), working in public and private hospitals, participated and motivation was compared across socio-demographic and occupational variables. Results The range of reported motivational factors was mixed and Maslow's conclusions that lower level motivational factors must be met before ascending to the next level were not confirmed. The highest ranked motivator for the entire sample, and by professional subgroup, was achievements (P motivators were similar, and only one significant difference was observed, namely between doctors and nurses in respect to co-workers (P motivated by all factors significantly more than their public-hospital counterparts. Conclusion The results are in agreement with the literature which focuses attention to management approaches employing both monetary and non-monetary incentives to motivate health care workers. This study showed that intrinsic factors are particularly important and should become a target for effective employee motivation. PMID:19754968

Importance of professional qualification for operators of body scanners in prisons; Importância da habilitação profissional para operadores de escâneres corporais em presídios

Energy Technology Data Exchange (ETDEWEB)

Kühn, P.; Huhn, A., E-mail: profpeterk@gmail.com [Instituto Federal de Santa Catarina (IFSC), Florianópolis, SC (Brazil). Mestrado Profissional em Proteção Radiológica

2017-07-01

Introduction: The implantation of the personal search by body scanners is gradually being implanted in Brazilian prisons. The body scanner, if operated by a qualified professional, allows the observation of images, generated by X-rays, of the whole body avoiding the intimate search, which is questioned for being embarrassing to the visitors of the inmates. The use of X-rays without control of absorbed doses may endanger the health of operators of equipment and, in the case of prisons, also to visitors. Method: Exploratory and descriptive, based on national and international legislation on the subject, in order to analyze and identify suitable training for the operation of body scanners. Results: The study was composed of the Standards and Recommendations of the National and International Nuclear Energy Commission. The results although the legislation does not clearly identify professional training to operate scanners in prisons, a broad knowledge on ionizing radiation and radiological protection is of the utmost importance. Conclusion: The manipulation of equipment generating ionizing radiation must be performed by qualified and authorized professional, to guarantee the principles of radiological protection to whoever operates the equipment and the population that will possibly be submitted to the personal search in the prison units. Therefore, it is understood that professionals with adequate training and competence to ensure the integrity of the health of all are the professional of Radiological Techniques and these must prove their training with registration in the specific Class Council.

Study of a methodology of identifying important research problems by the PIRT process

International Nuclear Information System (INIS)

Aoki, Takayuki; Takagi, Toshiyuki; Urayama, Ryoichi; Komura, Ichiro; Furukawa, Takashi; Yusa, Noritaka

2014-01-01

In this paper, we propose a new methodology of identifying important research problems to be solved to improve the performance of some specific scientific technologies by the phenomena identification and ranking table (PIRT) process which has been used as a methodology for demonstrating the validity of the best estimate simulation codes in US Nuclear Regulatory Commission (USNRC) licensing of nuclear power plants. The new methodology makes it possible to identify important factors affecting the performance of the technologies from the viewpoint of the figure of merit and problems associated with them while it keeps the fundamental concepts of the original PIRT process. Also in this paper, we demonstrate the effectiveness of the new methodology by applying it to a task of extracting research problems for improving an inspection accuracy of ultrasonic testing or eddy current testing in the inspection of objects having cracks due to fatigue or stress corrosion cracking. (author)

Study of a methodology of identifying important research problems by the PIRT process

International Nuclear Information System (INIS)

Aoki, Takayuki; Takagi, Toshiyuki; Urayama, Ryoichi; Komura, Ichiro; Furukawa, Takashi; Yusa, Noritaka

2013-01-01

In this paper, we propose a new methodology of identifying important research problems to be solved to improve the performance of some specific scientific technologies by the phenomena identification and ranking table (PIRT) process, which has been used as a methodology for demonstrating the validity of the best estimate simulation codes in USNRC licensing of nuclear power plants. It keeps the fundamental concepts of the original PIRT process but makes it possible to identify important factors affecting the performance of the technologies from the viewpoint of the figure of merit and problems associated with them, which need to be solved to improve the performance. Also in this paper, we demonstrate the effectiveness of the developed method by showing a specific example of the application to physical events or phenomena in objects having fatigue or SCC crack(s) under ultrasonic testing and eddy current testing. (author)

Statistical Analyses of Scatterplots to Identify Important Factors in Large-Scale Simulations

Energy Technology Data Exchange (ETDEWEB)

Kleijnen, J.P.C.; Helton, J.C.

1999-04-01

The robustness of procedures for identifying patterns in scatterplots generated in Monte Carlo sensitivity analyses is investigated. These procedures are based on attempts to detect increasingly complex patterns in the scatterplots under consideration and involve the identification of (1) linear relationships with correlation coefficients, (2) monotonic relationships with rank correlation coefficients, (3) trends in central tendency as defined by means, medians and the Kruskal-Wallis statistic, (4) trends in variability as defined by variances and interquartile ranges, and (5) deviations from randomness as defined by the chi-square statistic. The following two topics related to the robustness of these procedures are considered for a sequence of example analyses with a large model for two-phase fluid flow: the presence of Type I and Type II errors, and the stability of results obtained with independent Latin hypercube samples. Observations from analysis include: (1) Type I errors are unavoidable, (2) Type II errors can occur when inappropriate analysis procedures are used, (3) physical explanations should always be sought for why statistical procedures identify variables as being important, and (4) the identification of important variables tends to be stable for independent Latin hypercube samples.

49 CFR 192.905 - How does an operator identify a high consequence area?

Science.gov (United States)

2010-10-01

...) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Gas Transmission Pipeline Integrity Management § 192.905 How does an operator identify a high consequence area? (a...

41 CFR 102-85.175 - Are the standard level services for cleaning, mechanical operation, and maintenance identified in...

Science.gov (United States)

2010-07-01

... services for cleaning, mechanical operation, and maintenance identified in an OA? 102-85.175 Section 102-85... of Service § 102-85.175 Are the standard level services for cleaning, mechanical operation, and maintenance identified in an OA? Unless specified otherwise in the OA, standard level services for cleaning...

Identifying Methane Sources with an Airborne Pulsed IPDA Lidar System Operating near 1.65 µm

Science.gov (United States)

Yerasi, A.; Bartholomew, J.; Tandy, W., Jr.; Emery, W. J.

2016-12-01

Methane is a powerful greenhouse gas that is predicted to play an important role in future global climate trends. It would therefore be beneficial to locate areas that produce methane in significant amounts so that these trends can be better understood. In this investigation, some initial performance test results of a lidar system called the Advanced Leak Detector Lidar - Natural Gas (ALDL-NG) are discussed. The feasibility of applying its fundamental principle of operation to methane source identification is also explored. The ALDL-NG was originally created by the Ball Aerospace & Technologies Corp. to reveal leaks emanating from pipelines that transport natural gas, which is primarily composed of methane. It operates in a pulsed integrated path differential absorption (IPDA) configuration and it is carried by a piloted, single-engine aircraft. In order to detect the presence of natural gas leaks, the laser wavelengths of its online and offline channels operate in the 1.65 µm region. The functionality of the ALDL-NG was tested during a recent field campaign in Colorado. It was determined that the ambient concentration of methane in the troposphere ( 1.8 ppm) could indeed be retrieved from ALDL-NG data with a lower-than-expected uncertainty ( 0.2 ppm). Furthermore, when the ALDL-NG scanned over areas that were presumed to be methane sources (feedlots, landfills, etc.), significantly higher concentrations of methane were retrieved. These results are intriguing because the ALDL-NG was not specifically designed to observe anything beyond natural gas pipelines. Nevertheless, they strongly indicate that utilizing an airborne pulsed IPDA lidar system operating near 1.65 µm may very well be a viable technique for identifying methane sources. Perhaps future lidar systems could build upon the heritage of the ALDL-NG and measure methane concentration with even better precision for a variety of scientific applications.

75 FR 2490 - Taking and Importing Marine Mammals; Naval Explosive Ordnance Disposal School Training Operations...

Science.gov (United States)

2010-01-15

... Importing Marine Mammals; Naval Explosive Ordnance Disposal School Training Operations Activities at Eglin...) for authorization to take marine mammals, by harassment, incidental to Naval Explosive Ordnance Disposal School (NEODS) training operations, military readiness activities, at Eglin AFB, FL from...

The role and importance of UAV within the current theaters of operations

Directory of Open Access Journals (Sweden)

Niculae MARIN

2010-06-01

Full Text Available Current theaters of operations are not limited to battlefields, but they are much morediversified, including the fight against the international terrorism phenomenon, the social conflicts (ofreligious, political, economic and separatist nature within several countries, thus supplying somepolitical-military conflicts within different states and areas of the world. The armed interference mustbe done based on some highly accurate information that must be gathered without endangering thehuman lives. This is the role currently played by the unmanned air vehicles (UAVs; they can performseveral functions: surveillance, information gathering, data storage and their transmission to theground stations, including the function of interference, when needed. This paper presents, within theabove context, the status of the current theaters of operations and of the UAVs performing differentmissions within these theaters, together with their role and importance in warfare operations.

Increased importance of humanware in Operations Management

DEFF Research Database (Denmark)

Christiansen, Thomas Bøhm

Eksamens-paper til doctoral seminar in Operations Management på School of Management, Boston University......Eksamens-paper til doctoral seminar in Operations Management på School of Management, Boston University...

77 FR 25435 - Taking and Importing Marine Mammals; Naval Explosive Ordnance Disposal School Training Operations...

Science.gov (United States)

2012-04-30

... B harassment, incidental to Naval Explosive Ordnance Disposal School (NEODS) training operations at... Importing Marine Mammals; Naval Explosive Ordnance Disposal School Training Operations at Eglin Air Force... and the Issuance of Letters of Authorization to Take Marine Mammals, by Level B Harassment, Incidental...

Development of export and import operations in the market of poultry production

Directory of Open Access Journals (Sweden)

Kyryliuk O.F.

2017-12-01

Full Text Available the article examines the current trends in the development of the poultry industry in Ukraine in the context of the deepening of European integration; the priorities of export and import operations in the world food markets are examined. In recent years, Ukraine has officially changed the vector of foreign policy and economy.

Identify the Important Decision Factors of Online Shopping Adoption in Indonesia

Directory of Open Access Journals (Sweden)

Lailatul HIJRAH

2017-12-01

Full Text Available The objective of this study is to identify factors encouraging a consumer to engage in online shopping activities. The expected contribution of this study is for online entrepreneurs, in order to develop the most suitable business strategy, so that it will be clearly identified and sorted out which factors are the most important and the main motivation of Indonesian consumers to shop via online by using responses from respondents who usually shop online and offline in 3 cities in Indonesia, Jakarta, Surabaya and Samarinda. The research instruments were developed by conducting FGDs on relevant groups, either academics, online shopping activists, suppliers and courier businessmen in Jakarta, Surabaya and Samarinda Cities in effort to extract any information that encourages consumers to online shopping. After conducting FGD, the researcher produced 48 items proposed for factor analysis and after extracted to form eleven constructs, some items were removed because they had less loading factors. The eleven constructs or dimensions are trust, risk, consumer factors, website factors, price, service quality, convenience, subjective norm, product guarantee, variety of products and lifestyle. The implications of this study provide valuable insights about consumer decisions to online shopping or not online shopping.

The Importance of identifiers: IWGSC Meeting 20170720

OpenAIRE

Haak, Laurel

2017-01-01

Presentation by Laure Haak at the 20 July 2017 meeting of the IWGSC, about use of identifiers in connecting researchers, funding, facilities, and publications. Description of approach and initial results of User Facilities and Publications Working Group, and applications for Scientific Collections.

Prioritizing operation strategies of companies using fuzzy AHP and importance-performance matrix

Directory of Open Access Journals (Sweden)

Mohamad Amin Kaviani

2014-06-01

Full Text Available One of the most important steps to build an appropriate business unit is to setup a suitable long-term strategy. A good strategy helps organization take better advantage of the existing resources and improve the performance of the firm. This paper presents a hybrid method consists of importance-performance analysis combined with fuzzy analytical hierarchy process to determine different operating strategies to increase the performance of a cement industry in Iran. The results indicate that being competitive is number one priority followed by fast delivery, quality product, dependability, cost of production and flexibility.

Environmental concerns gaining importance in industry operations

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper reports that environmental concerns have leapt to the forefront of industry's concerns in operating in Latin America. The United Nations Conference on Environment and Development in Rio de Janeiro June 3-14 focused a strong world spotlight on the region's environmental and commercial resources. Protection of the region's rain forests, which accounts for a huge share of the world's total, is emerging as an especially contentious issue. Ecuador's Oriente region may well prove the litmus test of how or whether oil and gas companies are able to operate in Latin American rain forests. Controversy over industry operations in the Oriente have heated to the point that environmentalist and native groups have routinely picketed company offices in Quito and used mass fundraiser mailings in North America

Evaluations and utilizations of risk importances

International Nuclear Information System (INIS)

Vesely, W.E.; Davis, T.C.

1985-08-01

This report presents approaches for utilizing Probabilistic Risk Analyses (PRA's) to determine risk importances. Risk importances are determined for design features, plant operations, and other factors that can affect risk. PRA's can be used to identify the importances of risk contributors or proposed changes to designs or operations. The objective of this report is to serve as a handbook and guide in evaluating and applying risk importances. The utilization of both qualitative risk importances and quantitative risk importances is described in this report. Qualitative risk importances are based on the logic models in the PRA, while quantitative risk importances are based on the quantitative results of the PRA. Both types of importances are among the most robust and meaningful information a PRA can provide. A wide variety of risk importance evaluations are described including evaluations of the importances of design changes, testing, maintenance, degrading environments, and aging. Specific utilizations are described in inspection and in reliability assurance programs, however the general approaches have widespread applicability. The role of personal computers and decision support programs in applying risk importance evaluations is also described

Important characteristics of operational force members

CSIR Research Space (South Africa)

Van Heerden, Adelai

2017-10-01

Full Text Available The operational forces military context is generally acknowledged as one of the most stressful contexts as it is demanding of members on a physical, psychological, social level with organisational, intra- and inter-personal demands of an extreme...

The Importance of Rainfall Distribution in Urban Drainage Operation

DEFF Research Database (Denmark)

Nelen, Fons; Mooijman, Annemarieke; Jacobsen, Per

1992-01-01

be desired. Time-series simulations are performed for both an uncontrolled and a controlled system. It is shown that from a statistical point of view, rainfall distribution is NOT significant concerning the probability of occurrence of an overflow. The main contributing factor to the potential of real time......A control simulation model, called LOCUS, is used to investigate the effects of spatially distributed rain and the possibilities to benefit from this phenomenon by means of real time control. The study is undertaken for a catchment in Copenhagen, where rainfall is measured with a network of 8 rain...... control, concerning minimizing overflows, is to be found in the system itself, i.e. the distribution of available storage and discharge capacity. When other operational objectives are involved, e.g., to minimize peak flows to the treatment plant, rainfall distribution may be an important factor....

Water and Climate Impacts on Power System Operations: The Importance of Cooling Systems and Demand Response Measures

Energy Technology Data Exchange (ETDEWEB)

Macknick, Jordan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Zhou, Ella [National Renewable Energy Lab. (NREL), Golden, CO (United States); O' Connell, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States); Brinkman, Gregory [National Renewable Energy Lab. (NREL), Golden, CO (United States); Miara, Ariel [City College of New York, NY (United States); Ibanez, Eduardo [GE Energy Connections, Atlanta, GA (United States); Hummon, Marissa [Tendril, Denver, CO (United States)

2016-12-01

The U.S. electricity sector is highly dependent upon water resources; changes in water temperatures and water availability can affect operational costs and the reliability of power systems. Despite the importance of water for power system operations, the effects of changes in water characteristics on multiple generators in a system are generally not modeled. Moreover, demand response measures, which can change the magnitude and timing of loads and can have beneficial impacts on power system operations, have not yet been evaluated in the context of water-related power vulnerabilities. This effort provides a first comprehensive vulnerability and cost analysis of water-related impacts on a modeled power system and the potential for demand response measures to address vulnerability and cost concerns. This study uniquely combines outputs and inputs of a water and power plant system model, production cost, model, and relative capacity value model to look at variations in cooling systems, policy-related thermal curtailments, and demand response measures to characterize costs and vulnerability for a test system. Twenty-five scenarios over the course of one year are considered: a baseline scenario as well as a suite of scenarios to evaluate six cooling system combinations, the inclusion or exclusion of policy-related thermal curtailments, and the inclusion or exclusion of demand response measures. A water and power plant system model is utilized to identify changes in power plant efficiencies resulting from ambient conditions, a production cost model operating at an hourly scale is used to calculate generation technology dispatch and costs, and a relative capacity value model is used to evaluate expected loss of carrying capacity for the test system.

Identifying obstacles and ranking common biological control research priorities for Europe to manage most economically important pests in arable, vegetable and perennial crops.

Science.gov (United States)

Lamichhane, Jay Ram; Bischoff-Schaefer, Monika; Bluemel, Sylvia; Dachbrodt-Saaydeh, Silke; Dreux, Laure; Jansen, Jean-Pierre; Kiss, Jozsef; Köhl, Jürgen; Kudsk, Per; Malausa, Thibaut; Messéan, Antoine; Nicot, Philippe C; Ricci, Pierre; Thibierge, Jérôme; Villeneuve, François

2017-01-01

EU agriculture is currently in transition from conventional crop protection to integrated pest management (IPM). Because biocontrol is a key component of IPM, many European countries recently have intensified their national efforts on biocontrol research and innovation (R&I), although such initiatives are often fragmented. The operational outputs of national efforts would benefit from closer collaboration among stakeholders via transnationally coordinated approaches, as most economically important pests are similar across Europe. This paper proposes a common European framework on biocontrol R&I. It identifies generic R&I bottlenecks and needs as well as priorities for three crop types (arable, vegetable and perennial crops). The existing gap between the market offers of biocontrol solutions and the demand of growers, the lengthy and expensive registration process for biocontrol solutions and their varying effectiveness due to variable climatic conditions and site-specific factors across Europe are key obstacles hindering the development and adoption of biocontrol solutions in Europe. Considering arable, vegetable and perennial crops, a dozen common target pests are identified for each type of crop and ranked by order of importance at European level. Such a ranked list indicates numerous topics on which future joint transnational efforts would be justified. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Screening and prioritisation of chemical risks from metal mining operations, identifying exposure media of concern.

Science.gov (United States)

Pan, Jilang; Oates, Christopher J; Ihlenfeld, Christian; Plant, Jane A; Voulvoulis, Nikolaos

2010-04-01

Metals have been central to the development of human civilisation from the Bronze Age to modern times, although in the past, metal mining and smelting have been the cause of serious environmental pollution with the potential to harm human health. Despite problems from artisanal mining in some developing countries, modern mining to Western standards now uses the best available mining technology combined with environmental monitoring, mitigation and remediation measures to limit emissions to the environment. This paper develops risk screening and prioritisation methods previously used for contaminated land on military and civilian sites and engineering systems for the analysis and prioritisation of chemical risks from modern metal mining operations. It uses hierarchical holographic modelling and multi-criteria decision making to analyse and prioritise the risks from potentially hazardous inorganic chemical substances released by mining operations. A case study of an active platinum group metals mine in South Africa is used to demonstrate the potential of the method. This risk-based methodology for identifying, filtering and ranking mining-related environmental and human health risks can be used to identify exposure media of greatest concern to inform risk management. It also provides a practical decision-making tool for mine acquisition and helps to communicate risk to all members of mining operation teams.

Importance measures for use in PRAs and risk management

International Nuclear Information System (INIS)

Schmidt, E.R.; Jamali, K.M.; Parry, G.W.; Gibbon, S.H.

1985-01-01

There are many quantities estimated in probabilistic risk assessments (PRAs) to index the level of plant safety. If the PRA is to be used as a risk management tool to assist in the safe operation of the plant, it is essential that those elements of the plant design and its mode of operation that have the greatest impact on plant safety be identified. These elements may be identified by performing importance calculations. There are certain decisions that must be made before the importance calculation is carried out. The first is the definition of the events for which importance is to be evaluated; that is, to what level of resolution the analysis is to be performed. The second decision that must be made--and the major subject of this paper--is the choice of importance measure. Many measures of importance have been proposed; this discussion is restricted to three: the risk achievement (or degradation) worth, the risk reduction worth, and criticality importance. In the paper these measures of importance are defined, their interrelationships are discussed, and a generalized importance measure is introduced. The use of these three measures is compared and their advantages and disadvantages are discussed

The importance of hydronephrosis in percutaneous nephrolithotomy operation

Directory of Open Access Journals (Sweden)

Mehmet Murat Rifaioğlu

2013-09-01

Full Text Available Objective: The aim of this study is to investigate the relationbetween hydronephrosis grade and preoperative,peroperative and postoperative data and to evaluate theclinical significance of hydronephrosis in percutaneousnephrolithotomy (PNL.Methods: One hundred and thirty-two patients who hadundergone PNL operation by same surgeon betweenFebruary 2009 and February 2013 were reviewed retrospectively.Patients’ characteristics, preoperative kidneystatus, operative data were investigated. Grade 1, 2 hydronephrosiswere determined as Group I, Grade 3, 4hydronephrosis were determined as Group II. Preoperative,peroperative and postoperative property differencesbetween groups were compared statistically. For the multivariateanalysis, logistic regression analysis was usedto determine independent predictors of hydronephrosis.Results: Patients mean age was 46.2±13.7 years (8-73.Operation mean time was 101(10-250 minutes. 56 and76 patients’ data were analyzed in Group I and GroupII, respectively. There was no difference in age, gender,BMI, and surgeon experience between groups. Droppingstone history in same kidney (p=0.012, stone diameter(p=0.022, the number of calyceal stones (p=0.005, presencestone in the other kidney (p=0.027, renal parenchymalthickness (p=0.026 and operation time (p=0.011had significantly in univariate analysis. In logistic regressionmodel, dropping stone history in the same kidney,the number of calyceal stones, presence stone in theother kidney and operation time had a relationship withhydronephrosis.Conclusion: In PNL, patients with low-grade hydronephrosismight have decreased complication rates dueto diminished operation time, which resulted in reducednumber of calyceal stones and stone size.Key words: Percutaneous nephrolithotomy, PNL, hydronephrosis,outcome

Study Results on Knowledge Requirements for Entry-Level Airport Operations and Management Personnel

Science.gov (United States)

Quilty, Stephen M.

2005-01-01

This paper identifies important topical knowledge areas required of individuals employed in airport operations and management positions. A total of 116 airport managers and airfield operations personnel responded to a survey that sought to identify the importance of various subject matter for entry level airport operations personnel. The results from this study add to the body of research on aviation management curriculum development and can be used to better develop university curriculum and supplemental training focused on airport management and operations. Recommendations are made for specialized airport courses within aviation management programs. Further, this study identifies for job seekers or individuals employed in entry level positions those knowledge requirements deemed important by airport managers and operations personnel at different sized airports.

NRC Information No. 90-01: Importance of proper response to self-identified violations by licensees

International Nuclear Information System (INIS)

Cunningham, R.E.

1992-01-01

NRC expects a high standard of compliance by its licensees and requires that licensees provide NRC accurate and complete information and that required records will also be complete and accurate in all material respects. Licensees should be aware of the importance placed by NRC on licensee programs for self detection, correction and reporting of violations or errors related to regulatory requirements. The General Statement of Policy and Procedures for NRC Enforcement Actions in Appendix C to 10 CFR Part 2 underscores the importance of licensees responding promptly and properly to self-identified violations in two ways. It is suggested that when a licensee identifies a violation involving an NRC-required record, the licensee should make a dated notation indicating identification, either on the record itself or other appropriate documentation retrievable for NRC review. The record with the self-identified violation noted should not be altered in any way to mask the correction. The licensee should determine the cause of the violation, correct the root cause of the violation, and document such findings in an appropriate manner. Licensees should also assure that if a report of the violation is required, the report is submitted to NRC in a timely manner. These actions will be considered by NRC in making any enforcement decision, and generally lead to lesser or no civil penalty

Risk Importance Measures in the Designand Operation of Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Vrbanic I.; Samanta P.; Basic, I

2017-10-31

This monograph presents and discusses risk importance measures as quantified by the probabilistic risk assessment (PRA) models of nuclear power plants (NPPs) developed according to the current standards and practices. Usually, PRA tools calculate risk importance measures related to a single ?basic event? representing particular failure mode. This is, then, reflected in many current PRA applications. The monograph focuses on the concept of ?component-level? importance measures that take into account different failure modes of the component including common-cause failures (CCFs). In opening sections the roleof risk assessment in safety analysis of an NPP is introduced and discussion given of ?traditional?, mainly deterministic, design principles which have been established to assign a level of importance to a particular system, structure or component. This is followed by an overview of main risk importance measures for risk increase and risk decrease from current PRAs. Basic relations which exist among the measures are shown. Some of the current practical applications of risk importancemeasures from the field of NPP design, operation and regulation are discussed. The core of the monograph provides a discussion on theoreticalbackground and practical aspects of main risk importance measures at the level of ?component? as modeled in a PRA, starting from the simplest case, single basic event, and going toward more complexcases with multiple basic events and involvements in CCF groups. The intent is to express the component-level importance measures via theimportance measures and probabilities of the underlying single basic events, which are the inputs readily available from a PRA model andits results. Formulas are derived and discussed for some typical cases. The formulas and their results are demonstrated through some practicalexamples, done by means of a simplified PRA model developed in and run by RiskSpectrum? tool, which are presented in the appendices. The

Implementation of Canny and Isotropic Operator with Power Law Transformation to Identify Cervical Cancer

Science.gov (United States)

Amalia, A.; Rachmawati, D.; Lestari, I. A.; Mourisa, C.

2018-03-01

Colposcopy has been used primarily to diagnose pre-cancer and cancerous lesions because this procedure gives an exaggerated view of the tissues of the vagina and the cervix. But, the poor quality of colposcopy image sometimes makes physician challenging to recognize and analyze it. Generally, Implementation of image processing to identify cervical cancer have to implement a complex classification or clustering method. In this study, we wanted to prove that by only applying the identification of edge detection in the colposcopy image, identification of cervical cancer can be determined. In this study, we implement and comparing two edge detection operator which are isotropic and canny operator. Research methodology in this paper composed by image processing, training, and testing stages. In the image processing step, colposcopy image transformed by nth root power transformation to get better detection result and continued with edge detection process. Training is a process of labelling all dataset image with cervical cancer stage. This process involved pathology doctor as an expert in diagnosing the colposcopy image as a reference. Testing is a process of deciding cancer stage classification by comparing the similarity image of colposcopy results in the testing stage with the image of the results of the training process. We used 30 images as a dataset. The result gets same accuracy which is 80% for both Canny or Isotropic operator. Average running time for Canny operator implementation is 0.3619206 ms while Isotropic get 1.49136262 ms. The result showed that Canny operator is better than isotropic operator because Canny operator generates a more precise edge with a fast time instead.

Identifying and Prioritizing the Effective Parameters on Lack of Timeliness of Operations of Sugarcane Production using Analytical Hierarchy Process (AHP

Directory of Open Access Journals (Sweden)

N Monjezi

2017-10-01

Full Text Available Introduction Planning and scheduling of farming mechanized operations is very important. If the operation is not performed on time, yield will be reduced. Also for sugarcane, any delay in crop planting and harvesting operations reduces the yield. The most useful priority setting method for agricultural projects is the analytic hierarchy process (AHP. So, this article presents an introductry application manner of the Analytical Hierarchy Process (AHP as a mostly common method of setting agricultural projects priorities. Analytic Hierarchy process (AHP is a decision making algorithm developed by Dr. Saatyin 1980. It has many applications as documented in Decision Support System literature. Currently, this technique is widely used in complicated management decision makings which AHP was preferred from other established methodologies as it does not demand prior knowledge of the utility function; it is based on a hierarchy of criteria and attributes reflecting the understanding of the problem, and finally, because it allows relative and absolute comparisons, thus making this method a very robust tool. The purpose of this research is to identify and prioritize the effective parameters on lack of timeliness of operations of sugarcane production using AHP in Khuzestan province of Iran. Materials and Methods The effective parameters effecting on lack of timeliness of operations have been defined based on expert’s opinions. A questionnaire and personal interviews have formed the basis of this research. The study was applied to a panel of qualified informants made up of fourteen experts. Those interviewed were distributed in Sugarcane Development and By-products Company in 2013-2014. Then, by using the Analytical hierarchy process, a questionnaire was designed for defining the weight and importance of parameters affecting on lack of timeliness of operations. For this method of evaluation, three main criteria considered were yield criteria, cost criteria

Use of amplified fragment length polymorphism analysis to identify medically important Candida spp., including C-dubliniensis

NARCIS (Netherlands)

Borst, A; Theelen, B; Reinders, E; Boekhout, T; Fluit, AC; Savelkoul, PHM

Non-Candida albicans Candida species are increasingly being isolated. These species show differences in levels of resistance to antimycotic agents and mortality. Therefore, it is important to be able to correctly identify the causative organism to the species level. Identification of C. dubliniensis

Use of amplified fragment length polymorphism analysis to identify medically important Candida spp., including C. dubliniensis.

NARCIS (Netherlands)

Borst, A; Theelen, B; Reinders, E; Boekhout, T; Fluit, AC; Savelkoul, P.H.M.

2003-01-01

Non-Candida albicans Candida species are increasingly being isolated. These species show differences in levels of resistance to antimycotic agents and mortality. Therefore, it is important to be able to correctly identify the causative organism to the species level. Identification of C. dubliniensis

The building blocks of a 'Liveable Neighbourhood': Identifying the key performance indicators for walking of an operational planning policy in Perth, Western Australia.

Science.gov (United States)

Hooper, Paula; Knuiman, Matthew; Foster, Sarah; Giles-Corti, Billie

2015-11-01

Planning policy makers are requesting clearer guidance on the key design features required to build neighbourhoods that promote active living. Using a backwards stepwise elimination procedure (logistic regression with generalised estimating equations adjusting for demographic characteristics, self-selection factors, stage of construction and scale of development) this study identified specific design features (n=16) from an operational planning policy ("Liveable Neighbourhoods") that showed the strongest associations with walking behaviours (measured using the Neighbourhood Physical Activity Questionnaire). The interacting effects of design features on walking behaviours were also investigated. The urban design features identified were grouped into the "building blocks of a Liveable Neighbourhood", reflecting the scale, importance and sequencing of the design and implementation phases required to create walkable, pedestrian friendly developments. Copyright © 2015 Elsevier Ltd. All rights reserved.

Reducing uncertainty at minimal cost: a method to identify important input parameters and prioritize data collection

NARCIS (Netherlands)

Uwizeye, U.A.; Groen, E.A.; Gerber, P.J.; Schulte, Rogier P.O.; Boer, de I.J.M.

2016-01-01

The study aims to illustrate a method to identify important input parameters that explain most of the output variance ofenvironmental assessment models. The method is tested for the computation of life-cycle nitrogen (N) use efficiencyindicators among mixed dairy production systems in Rwanda. We

Identifying Special Operations as a Distinct Foreign Policy Instrument

DEFF Research Database (Denmark)

Johnsen, Anton Asklund

2017-01-01

to clarify and explain what special operations strategic qualities exactly are. The author then elaborates on specific elements of special operations with a point of departure in the “cognitive maps of SOF” as formulated in the research question. The author recommends that in order to influence policy...... on special operations, it is essential to have insight into the instrument’s capabilities and limitations, as this provides the prerequisites for sound contextual strategic analysis....

PCR-RFLP Method to Identify Salmonid Species of Economic Importance

Directory of Open Access Journals (Sweden)

Andreea Dudu

2011-05-01

Full Text Available The identification of different fish species by molecular methods has become necessary to avoid both the incorrect labelling of individuals involved in repopulation programmes and the commercial frauds on the fish market. Different fish species of great economical importance, like the salmonids, which are very much requested for their meat, can be identified using molecular techniques such as PCR-RFLP. The method is based on the amplification of a target region from the genome by PCR reaction followed by endonucleases digestion to detect the polymorphism of restriction fragments. In our study we analysed the following salmonid species from Romania: Salmo trutta fario, Salmo labrax, Salvelinus fontinalis, Onchorhynchus mykiss, Thymallus thymallus and Hucho hucho. In order to discriminate between the analysed species we amplified a fragment of mitochondrial genome comprising tRNAGlu/ cytochrome b/ tRNAThr/ tRNAPro/ D-loop/ tRNAPhe, followed by digestion with a specific restriction enzyme. The direct digestion of unpurified PCR products generated species-specific restriction patterns and proved to be a simple, reliable, inexpensive and fast method. Thus, it may be successfully utilized in specialized laboratories for the correct identification of the fish species for multiple purposes, including the traceability of fish food products.

Demonstration of statistical approaches to identify component's ageing by operational data analysis-A case study for the ageing PSA network

International Nuclear Information System (INIS)

Rodionov, Andrei; Atwood, Corwin L.; Kirchsteiger, Christian; Patrik, Milan

2008-01-01

The paper presents some results of a case study on 'Demonstration of statistical approaches to identify the component's ageing by operational data analysis', which was done in the frame of the EC JRC Ageing PSA Network. Several techniques: visual evaluation, nonparametric and parametric hypothesis tests, were proposed and applied in order to demonstrate the capacity, advantages and limitations of statistical approaches to identify the component's ageing by operational data analysis. Engineering considerations are out of the scope of the present study

Moderated mediation to identify the knowledge stocks, learning flows and barriers at a Dutch telecom operator

NARCIS (Netherlands)

de Schryver, Tom; Rosendaal, Bas

2013-01-01

Drawing on the 4I-model of Crossan et al. (1999), we have identified the knowledge stocks, learning flows and barriers at a Dutch telecom operator by means of moderated mediation. In this company, the strategic relevant knowledge stocks move in the same direction and many processes support their

Importance of Knowledge Management in Human Resource Development

International Nuclear Information System (INIS)

Pleslic, Sanda

2014-01-01

Human resource management and knowledge management: • In human resource management - important to identify crucial knowledge base on which competitiveness of company depends → according this ensure appropriate development of human resources. • Era of so-called knowledge economy - only individual and organizational knowledge could give competitive advantage. • From operational perspective, knowledge management - systematic processes by which an organization identifies, creates, captures, acquires, shares and increase knowledge

Using the Developmental Gene Bicoid to Identify Species of Forensically Important Blowflies (Diptera: Calliphoridae

Directory of Open Access Journals (Sweden)

Seong Hwan Park

2013-01-01

Full Text Available Identifying species of insects used to estimate postmortem interval (PMI is a major subject in forensic entomology. Because forensic insect specimens are morphologically uniform and are obtained at various developmental stages, DNA markers are greatly needed. To develop new autosomal DNA markers to identify species, partial genomic sequences of the bicoid (bcd genes, containing the homeobox and its flanking sequences, from 12 blowfly species (Aldrichina grahami, Calliphora vicina, Calliphora lata, Triceratopyga calliphoroides, Chrysomya megacephala, Chrysomya pinguis, Phormia regina, Lucilia ampullacea, Lucilia caesar, Lucilia illustris, Hemipyrellia ligurriens and Lucilia sericata; Calliphoridae: Diptera were determined and analyzed. This study first sequenced the ten blowfly species other than C. vicina and L. sericata. Based on the bcd sequences of these 12 blowfly species, a phylogenetic tree was constructed that discriminates the subfamilies of Calliphoridae (Luciliinae, Chrysomyinae, and Calliphorinae and most blowfly species. Even partial genomic sequences of about 500 bp can distinguish most blowfly species. The short intron 2 and coding sequences downstream of the bcd homeobox in exon 3 could be utilized to develop DNA markers for forensic applications. These gene sequences are important in the evolution of insect developmental biology and are potentially useful for identifying insect species in forensic science.

Using the Developmental Gene Bicoid to Identify Species of Forensically Important Blowflies (Diptera: Calliphoridae)

Science.gov (United States)

Park, Seong Hwan; Park, Chung Hyun; Zhang, Yong; Piao, Huguo; Chung, Ukhee; Kim, Seong Yoon; Ko, Kwang Soo; Yi, Cheong-Ho; Jo, Tae-Ho; Hwang, Juck-Joon

2013-01-01

Identifying species of insects used to estimate postmortem interval (PMI) is a major subject in forensic entomology. Because forensic insect specimens are morphologically uniform and are obtained at various developmental stages, DNA markers are greatly needed. To develop new autosomal DNA markers to identify species, partial genomic sequences of the bicoid (bcd) genes, containing the homeobox and its flanking sequences, from 12 blowfly species (Aldrichina grahami, Calliphora vicina, Calliphora lata, Triceratopyga calliphoroides, Chrysomya megacephala, Chrysomya pinguis, Phormia regina, Lucilia ampullacea, Lucilia caesar, Lucilia illustris, Hemipyrellia ligurriens and Lucilia sericata; Calliphoridae: Diptera) were determined and analyzed. This study first sequenced the ten blowfly species other than C. vicina and L. sericata. Based on the bcd sequences of these 12 blowfly species, a phylogenetic tree was constructed that discriminates the subfamilies of Calliphoridae (Luciliinae, Chrysomyinae, and Calliphorinae) and most blowfly species. Even partial genomic sequences of about 500 bp can distinguish most blowfly species. The short intron 2 and coding sequences downstream of the bcd homeobox in exon 3 could be utilized to develop DNA markers for forensic applications. These gene sequences are important in the evolution of insect developmental biology and are potentially useful for identifying insect species in forensic science. PMID:23586044

Resequencing 50 accessions of cultivated and wild rice yields markers for identifying agronomically important genes

DEFF Research Database (Denmark)

Xu, Xun; Liu, Xin; Ge, Song

2012-01-01

Rice is a staple crop that has undergone substantial phenotypic and physiological changes during domestication. Here we resequenced the genomes of 40 cultivated accessions selected from the major groups of rice and 10 accessions of their wild progenitors (Oryza rufipogon and Oryza nivara) to >15 x...... diversity in cultivated but not wild rice, which represent candidate regions selected during domestication. Some of these variants are associated with important biological features, whereas others have yet to be functionally characterized. The molecular markers we have identified should be valuable...... raw data coverage. We investigated genome-wide variation patterns in rice and obtained 6.5 million high-quality single nucleotide polymorphisms (SNPs) after excluding sites with missing data in any accession. Using these population SNP data, we identified thousands of genes with significantly lower...

Are All Pixels Equally Important?

CERN Multimedia

CERN. Geneva

2015-01-01

When we look at our environment, we primarily pay attention to visually distinctive objects. We refer to these objects as visually important or salient. For efficient visual processing, the human visual system identifies salients objects and dedicates most of its processing resources to them. An analogous resource allocation can be performed by salient-object detection algorithms, which identify objects of interest in an image. Consequently, thanks to salient-object detection, complex visual computing operations can focus on the important parts of the visual data and can save time and resources. About the speaker Dr. Gokhan Yildirim is a research assistant in the School of Computer and Communication Sciences (IC) at the École Polytechnique Fédérale de Lausanne (EPFL). His research interests include image understanding, multimedia, pattern recognition, machine learning, salient-object detection on images & videos and its applications on image proces...

The hierarchy-by-interval approach to identifying important models that need improvement in severe-accident simulation codes

International Nuclear Information System (INIS)

Heames, T.J.; Khatib-Rahbar, M.; Kelly, J.E.

1995-01-01

The hierarchy-by-interval (HBI) methodology was developed to determine an appropriate phenomena identification and ranking table for an independent peer review of severe-accident computer codes. The methodology is described, and the results of a specific code review are presented. Use of this systematic and structured approach ensures that important code models that need improvement are identified and prioritized, which allows code sponsors to more effectively direct limited resources in future code development. In addition, critical phenomenological areas that need more fundamental work, such as experimentation, are identified

ITER operating limit definition criteria

International Nuclear Information System (INIS)

Ciattaglia, S.; Barabaschi, P.; Carretero, J.A.; Chiocchio, S.; Hureau, D.; Girard, J.Ph.; Gordon, C.; Portone, A.; Rodrigo, L. Rodriguez; Roldan, C.; Saibene, G.; Uzan-Elbez, J.

2009-01-01

The operating limits and conditions (OLCs) are operating parameters and conditions, chosen among all system/components, which, together, define the domain of the safe operation of ITER in all foreseen ITER states (operation, maintenance, commissioning). At the same time they are selected to guarantee the required operation flexibility which is a critical factor for the success of an experimental machine such as ITER. System and components that are important for personnel or public safety (safety important class, SIC) are identified considering their functional importance in the overall plant safety analysis. SIC classification has to be presented already in the preliminary safety analysis report and approved by the licensing authority before manufacturing and construction. OLCs comprise the safety limits that, if exceeded, could result in a potential safety hazard, the relevant settings that determine the intervention of SIC systems, and the operational limits on equipment which warn against or stop a functional deviation from a planned operational status that could challenge equipment and functions. Some operational conditions, e.g. in-Vacuum Vessel (VV) radioactive inventories, will be controlled through procedures. Operating experience from present tokamaks, in particular JET, and from nuclear plants, is considered to the maximum possible extent. This paper presents the guidelines for the development of the ITER OLCs with particular reference to safety limits.

Ergonomics perspective for identifying and reducing internal operative flow disruption for laparoscopic urological surgery.

Science.gov (United States)

Al-Hakim, Latif; Xiao, Jiaquan; Sengupta, Shomik

2017-12-01

The aim of this study is to examine operative flow disruption that occurs inside the surgical field, (internal operative flow disruption (OFD)), during urological laparoscopies, and to relate those events to external ergonomics environment in terms of monitor location, level of instruments' handles, and location of surgical team members. According to the our best knowledge, this is the first study of its kind. A combination of real and video-aided observational study was conducted in the operating rooms at hospitals in Australia and China. Brain storming sessions were first conducted to identify the main internal OFD events, and the observable reasons, potential external, and latent ergonomic factors were listed. A prospective observational study was then conducted. The observer's records and the related video records of internal surgical fields were analysed. Procedures were categorised into groups based on similarity in ergonomics environment. The mapping process revealed 39 types of internal OFD events resulted from six reasons. A total of 24 procedures were selected and arranged into two groups, each with twelve procedures. Group A was carried out under satisfactory ergonomics environment, while Group B was conducted under unsatisfactory ergonomics environment. A total of 1178 OFD events were detected delaying the total observed operative times (2966 min) by 220 min (7.43%). Average OFD/h in group A was less than 15, while in group B about 29 OFD/h. There are two main latent ergonomics factors affecting the surgeon's performance; non-physiological posture and long-period static posture. The delays and number of internal OFD were nearly doubled where procedures were conducted under unsatisfactory external ergonomics environment. Some events such as stopping operation and irrelevant conversations during long procedures may have a positive influence on the surgeon's performance.

Statistical analyses of scatterplots to identify important factors in large-scale simulations, 2: robustness of techniques

International Nuclear Information System (INIS)

Kleijnen, J.P.C.; Helton, J.C.

1999-01-01

The robustness of procedures for identifying patterns in scatterplots generated in Monte Carlo sensitivity analyses is investigated. These procedures are based on attempts to detect increasingly complex patterns in the scatterplots under consideration and involve the identification of (i) linear relationships with correlation coefficients, (ii) monotonic relationships with rank correlation coefficients, (iii) trends in central tendency as defined by means, medians and the Kruskal-Wallis statistic, (iv) trends in variability as defined by variances and interquartile ranges, and (v) deviations from randomness as defined by the chi-square statistic. The following two topics related to the robustness of these procedures are considered for a sequence of example analyses with a large model for two-phase fluid flow: the presence of Type I and Type II errors, and the stability of results obtained with independent Latin hypercube samples. Observations from analysis include: (i) Type I errors are unavoidable, (ii) Type II errors can occur when inappropriate analysis procedures are used, (iii) physical explanations should always be sought for why statistical procedures identify variables as being important, and (iv) the identification of important variables tends to be stable for independent Latin hypercube samples

The Perforation-Operation time Interval; An Important Mortality Indicator in Peptic Ulcer Perforation.

Science.gov (United States)

Surapaneni, Sushama; S, Rajkumar; Reddy A, Vijaya Bhaskar

2013-05-01

To find out the significance of the Perforation-Operation Interval (POI) with respect to an early prognosis, in patients with peritonitis which is caused by peptic ulcer perforation. Case series. Place and Duration of the Study: Department of General Surgery, Konaseema Institute of Medical Sciences and RF Amalapuram, Andhra Pradesh, India from 2008-2011. This study included 150 patients with generalized peritonitis, who were diagnosed to have Perforated Peptic Ulcers (PPUs). The diagnosis of the PPUs was established on the basis of the history , the clinical examination and the radiological findings. The perforation-operation interval was calculated from the time of onset of the symptoms like severe abdominal pain or vomiting till the time the patient was operated. Out of the 150 patients 134 were males and 16 were females, with a male : female ratio of 9:1. Their ages ranged between 25-70 years. Out of the 150 patients, 65 patients (43.3%) presented within 24 hours of the onset of severe abdominal pain (Group A), 27 patients (18%) presented between 24-48 hours of the onset of severe abdominal pain (Group B) and 58 patients (38.6%) presented after 48 hours. There was no mortality in Group A and the morbidity was more in Group B and Group C. There were 15 deaths in Group C. The problem of peptic ulcer perforation with its complication, can be decreased by decreasing the perforation -operation time interval, which as per our study, appeared to be the single most important mortality and morbidity indicator in peptic ulcer perforation.

Identifying variables that influence manufacturing product quality

Directory of Open Access Journals (Sweden)

Marek Krynke

2014-10-01

Full Text Available In the article a risk analysis of the production process of selected products in a plant producing votive candles was conducted. The Pareto-Lorenz diagram and FMEA method were used which indicated the most important areas affecting the production of selected elements of candles. The synthesis of intangible factors affecting production in the audited company was also carried out with particular emphasis on the operation of the production system. The factors determining the validity of studies was examined, describing the principle of BOST 14 Toyota management. The most important areas of the company were identified, positively affecting the production process.

Operational Reconnaissance: Identifying the Right Problems in a Complex World

Science.gov (United States)

2015-05-23

velocity of human interactions and the diverse demographics among populations as having critical impacts on land operations. Understanding these can have a...Achtung Panzer! Translated by Christopher Duffy. London, England: Arms and Armour Press, 1995. Echevarria II, Antonio J. “American Operational Art

Importance of the awareness, training exchange of information and co-operation between regulatory authorities and customs, police and other law enforcement agencies

International Nuclear Information System (INIS)

Shakshooki, S.K.; Al-Ahaimer, R.O.

1998-01-01

Fast developments in science and technology are a great accomplishment in this century. These facilities have been utilized by criminals and deviants by identified way. Industrial developed countries have their own means to improve and to modify technology and scientific facilities to cope up with any new existing problems, such as the problem of illegal trading of nuclear materials. Facilities for exchange of information among industrial countries also play an important role to prevent any dangerous phenomena may exist. In contrast most developing countries lack the means of up-to-date follow up quick and continuous scientific and technological developments. However they have qualified personnel to follow up quickly and to prevent drug and narcotics smuggling. Recently we have heard about a dangerous phenomena, the illegal trading of nuclear materials, which derive attention internationally. The developed countries can cope easily with it. However, in developing countries, their lack of up to date facilities can cause a grate damage to their nations. Libyan Arab Jamahiriya is always willing to co-operate internationally to prevent any new dangerous phenomena. We think it is a time for conformation on international official agreement regarding this phenomena. Exchange of information between different countries through an international agency is important for prohibiting the illegal nuclear materials trading. Also to help in creation of a temporally scientific committee to provide different countries of the world the available information in this area and to co-operate specially with police, custom and law enforcement agencies of each nation providing an international legislation for dealing with such phenomena is a priority. Assistance for the arrangement of training through IAEA is of great importance. (author)

Special Operations And Cyber Warfare

Science.gov (United States)

2016-12-01

Cyber weapons have multiple functions and can be used for espionage or OPE. It is important to highlight the similarities between the intelligence...James Clapper, Director of National Intelligence, emphasized the importance of cyber operations as he identified cyber as the third major hazard facing...support the development of the capacity and capability of foreign security forces and their supporting institutions.”52 The DOD’s Cyber Strategy states

Transnational Research Co-operation: Opportunities and Challenges for transnational research co-operation

DEFF Research Database (Denmark)

of the NGOs have a lot of international experience (mainly in Denmark and Germany) as partners in different co-operation projects. Almost all the NGOs have recognized the important role of the scientific information in their activity. NGOs also feel the need for an easy access to required information...... for transnational co-operation like: an investigation/project concerning the driving forces behind urban development,or a co-operation in the field of wastewater reuse and minimization of wastewater loads and discharge, or a service page (internet) to search for potential partners. The governmental institutions...... in order to improve transnational cooperation are identified to be: • Search for national/international project partners • Access to existent co-operation projects or networks • Develop in common project proposals on themes requested by community groups • Exchange information/good operational practices...

Anesthesiologists' and surgeons' perceptions about routine pre-operative testing in low-risk patients: application of the Theoretical Domains Framework (TDF) to identify factors that influence physicians' decisions to order pre-operative tests.

Science.gov (United States)

Patey, Andrea M; Islam, Rafat; Francis, Jill J; Bryson, Gregory L; Grimshaw, Jeremy M

2012-06-09

Routine pre-operative tests for anesthesia management are often ordered by both anesthesiologists and surgeons for healthy patients undergoing low-risk surgery. The Theoretical Domains Framework (TDF) was developed to investigate determinants of behaviour and identify potential behaviour change interventions. In this study, the TDF is used to explore anaesthesiologists' and surgeons' perceptions of ordering routine tests for healthy patients undergoing low-risk surgery. Sixteen clinicians (eleven anesthesiologists and five surgeons) throughout Ontario were recruited. An interview guide based on the TDF was developed to identify beliefs about pre-operative testing practices. Content analysis of physicians' statements into the relevant theoretical domains was performed. Specific beliefs were identified by grouping similar utterances of the interview participants. Relevant domains were identified by noting the frequencies of the beliefs reported, presence of conflicting beliefs, and perceived influence on the performance of the behaviour under investigation. Seven of the twelve domains were identified as likely relevant to changing clinicians' behaviour about pre-operative test ordering for anesthesia management. Key beliefs were identified within these domains including: conflicting comments about who was responsible for the test-ordering (Social/professional role and identity); inability to cancel tests ordered by fellow physicians (Beliefs about capabilities and social influences); and the problem with tests being completed before the anesthesiologists see the patient (Beliefs about capabilities and Environmental context and resources). Often, tests were ordered by an anesthesiologist based on who may be the attending anesthesiologist on the day of surgery while surgeons ordered tests they thought anesthesiologists may need (Social influences). There were also conflicting comments about the potential consequences associated with reducing testing, from negative

A review on the importance of metals and metalloids in atmospheric dust and aerosol from mining operations.

Science.gov (United States)

Csavina, Janae; Field, Jason; Taylor, Mark P; Gao, Song; Landázuri, Andrea; Betterton, Eric A; Sáez, A Eduardo

2012-09-01

Contaminants can be transported rapidly and over relatively long distances by atmospheric dust and aerosol relative to other media such as water, soil and biota; yet few studies have explicitly evaluated the environmental implications of this pathway, making it a fundamental but understudied transport mechanism. Although there are numerous natural and anthropogenic activities that can increase dust and aerosol emissions and contaminant levels in the environment, mining operations are notable with respect to the quantity of particulates generated, the global extent of area impacted, and the toxicity of contaminants associated with the emissions. Here we review (i) the environmental fate and transport of metals and metalloids in dust and aerosol from mining operations, (ii) current methodologies used to assess contaminant concentrations and particulate emissions, and (iii) the potential health and environmental risks associated with airborne contaminants from mining operations. The review evaluates future research priorities based on the available literature and suggest that there is a particular need to measure and understand the generation, fate and transport of airborne particulates from mining operations, specifically the finer particle fraction. More generally, our findings suggest that mining operations play an important but underappreciated role in the generation of contaminated atmospheric dust and aerosol and the transport of metal and metalloid contaminants, and highlight the need for further research in this area. The role of mining activities in the fate and transport of environmental contaminants may become increasingly important in the coming decades, as climate change and land use are projected to intensify, both of which can substantially increase the potential for dust emissions and transport. Copyright © 2012 Elsevier B.V. All rights reserved.

A Review on the Importance of Metals and Metalloids in Atmospheric Dust and Aerosol from Mining Operations

Science.gov (United States)

Csavina, Janae; Field, Jason; Taylor, Mark P.; Gao, Song; Landázuri, Andrea; Betterton, Eric A.; Sáez, A. Eduardo

2012-01-01

Contaminants can be transported rapidly and over relatively long distances by atmospheric dust and aerosol relative to other media such as water, soil and biota; yet few studies have explicitly evaluated the environmental implications of this pathway, making it a fundamental but understudied transport mechanism. Although there are numerous natural and anthropogenic activities that can increase dust and aerosol emissions and contaminant levels in the environment, mining operations are notable with respect to the quantity of particulates generated, the global extent of area impacted, and the toxicity of contaminants associated with the emissions. Here we review (i) the environmental fate and transport of metals and metalloids in dust and aerosol from mining operations, (ii) current methodologies used to assess contaminant concentrations and particulate emissions, and (iii) the potential health and environmental risks associated with airborne contaminants from mining operations. The review evaluates future research priorities based on the available literature and suggest that there is a particular need to measure and understand the generation, fate and transport of airborne particulates from mining operations, specifically the finer particle fraction. More generally, our findings suggest that mining operations play an important but underappreciated role in the generation of contaminated atmospheric dust and aerosol and the transport of metal and metalloid contaminants, and highlight the need for further research in this area. The role of mining activities in the fate and transport of environmental contaminants may become increasingly important in the coming decades, as climate change and land use are projected to intensify, both of which can substantially increase the potential for dust emissions and transport. PMID:22766428

Risk-Aware Planetary Rover Operation: Autonomous Terrain Classification and Path Planning

Science.gov (United States)

Ono, Masahiro; Fuchs, Thoams J.; Steffy, Amanda; Maimone, Mark; Yen, Jeng

2015-01-01

Identifying and avoiding terrain hazards (e.g., soft soil and pointy embedded rocks) are crucial for the safety of planetary rovers. This paper presents a newly developed groundbased Mars rover operation tool that mitigates risks from terrain by automatically identifying hazards on the terrain, evaluating their risks, and suggesting operators safe paths options that avoids potential risks while achieving specified goals. The tool will bring benefits to rover operations by reducing operation cost, by reducing cognitive load of rover operators, by preventing human errors, and most importantly, by significantly reducing the risk of the loss of rovers.

Important radiation protection aspects of the operation of a commercial medical cyclotron

International Nuclear Information System (INIS)

Mukherjee, B.

1997-01-01

Since July 1991 the Radiopharmaceutical Division of the Australian Nuclear Science and Technology Organisation (ANSTO) operates a 30 MeV H'- ion Medical Cyclotron (Model; CYCLONE 30, Manufacturer: Ion Beam Applications, Louvain La Neuve, Belgium). During routine isotope production operations at the cyclotron a thick copper substrate plate electroplated with thin layer of selected enriched target material are bombarded with 30 MeV proton beam current up to 450 μA. The nuclear reaction of protons with the copper atoms result in the reduction of prompt evaporation neutrons with a peak energy of ∼ 1.8 MeV. These evaporation neutrons slow down via multiple collisions with the concrete shielding walls of the target cave, bounce back to the,interior space of the cave activating the cyclotron parts, beam tube components and other utilities installed in the irradiation cave. After the completion of 60 hour isotope production run, gamma dose equivalent rates of ∼10 5 μSvh -1 were measured at contact with the target irradiation stations and beam collimators. Evidently, these gamma rays emitted from the activated cyclotron components impose crucial radiation exposure hazard problems for the cyclotron maintenance technicians. Experiments had been carried out in order to identify the specific pathways of cyclotron component activation and to assess the probable personnel radiation exposure during handling of the activated cyclotron parts. The cool-down (radioactive decay) of the activated cyclotron components was estimated experimentally at different target bombardment conditions using the wall mounted gamma area monitors interfaced to the Health Physics Data Acquisition System. The gamma dose equivalent rates at contact with various locations of interest at the target irradiation station and at the typical work areas of the maintenance personnel were carefully recorded with a radiation (gamma) survey instrument during the three years operation period of the cyclotron. A

Conduct of operations: establishing operational focus and setting operational standards

International Nuclear Information System (INIS)

Lane, L.; McGuigan, K.

1998-01-01

Due to the nature of our business, we have often tended to focus on the technological aspects of the nuclear industry. The focus of this paper is directed towards the importance of addressing the people skills, attitudes, and 'culture' within, and surrounding, our facilities as key areas of improvement. Within Ontario Hydro Nuclear (OLIN) we have developed the terminology 'event free' operation and 'event free' culture. 'Event Free' recognizes errors as a part of human performance. 'Event Free' takes into account human weaknesses, and provides tools (such as standards) to manage, control, and mitigate errors. In essence, 'Event Free' encompasses two concepts: 1. Prevent errors from occurring; 2. If an error is made, catch it before it can affect safe operation of the facility, learn from the error, and ensure that it does not happen again. In addressing these business realities, Ontario Hydro has identified a number of key support mechanisms and corresponding performance standards that are essential for achieving operating excellence and an 'event free' business culture. This paper will discuss two operational aspects of an 'event free' culture, the first being a set of expectations to enhance the culture, and the second an example of cultural change: 1. Operating Standards - establishing clear expectations for human performance in operating staff; 2. Operational Focus - the understanding that, as a nuclear worker, you should consider every task, activity, in fact everything you do in this business, for the potential to affect safe and reliable operation of a nuclear facility. Note that although the term 'Operational' appears in the title, this concept applies to every individual in the nuclear business, from the cleaner, to the Board of Directors, to the external supplier. (author)

Genome-Wide Association Study Identifying Candidate Genes Influencing Important Agronomic Traits of Flax (Linum usitatissimum L.) Using SLAF-seq.

Science.gov (United States)

Xie, Dongwei; Dai, Zhigang; Yang, Zemao; Sun, Jian; Zhao, Debao; Yang, Xue; Zhang, Liguo; Tang, Qing; Su, Jianguang

2017-01-01

Flax ( Linum usitatissimum L.) is an important cash crop, and its agronomic traits directly affect yield and quality. Molecular studies on flax remain inadequate because relatively few flax genes have been associated with agronomic traits or have been identified as having potential applications. To identify markers and candidate genes that can potentially be used for genetic improvement of crucial agronomic traits, we examined 224 specimens of core flax germplasm; specifically, phenotypic data for key traits, including plant height, technical length, number of branches, number of fruits, and 1000-grain weight were investigated under three environmental conditions before specific-locus amplified fragment sequencing (SLAF-seq) was employed to perform a genome-wide association study (GWAS) for these five agronomic traits. Subsequently, the results were used to screen single nucleotide polymorphism (SNP) loci and candidate genes that exhibited a significant correlation with the important agronomic traits. Our analyses identified a total of 42 SNP loci that showed significant correlations with the five important agronomic flax traits. Next, candidate genes were screened in the 10 kb zone of each of the 42 SNP loci. These SNP loci were then analyzed by a more stringent screening via co-identification using both a general linear model (GLM) and a mixed linear model (MLM) as well as co-occurrences in at least two of the three environments, whereby 15 final candidate genes were obtained. Based on these results, we determined that UGT and PL are candidate genes for plant height, GRAS and XTH are candidate genes for the number of branches, Contig1437 and LU0019C12 are candidate genes for the number of fruits, and PHO1 is a candidate gene for the 1000-seed weight. We propose that the identified SNP loci and corresponding candidate genes might serve as a biological basis for improving crucial agronomic flax traits.

Genome-Wide Association Study Identifying Candidate Genes Influencing Important Agronomic Traits of Flax (Linum usitatissimum L. Using SLAF-seq

Directory of Open Access Journals (Sweden)

Dongwei Xie

2018-01-01

Full Text Available Flax (Linum usitatissimum L. is an important cash crop, and its agronomic traits directly affect yield and quality. Molecular studies on flax remain inadequate because relatively few flax genes have been associated with agronomic traits or have been identified as having potential applications. To identify markers and candidate genes that can potentially be used for genetic improvement of crucial agronomic traits, we examined 224 specimens of core flax germplasm; specifically, phenotypic data for key traits, including plant height, technical length, number of branches, number of fruits, and 1000-grain weight were investigated under three environmental conditions before specific-locus amplified fragment sequencing (SLAF-seq was employed to perform a genome-wide association study (GWAS for these five agronomic traits. Subsequently, the results were used to screen single nucleotide polymorphism (SNP loci and candidate genes that exhibited a significant correlation with the important agronomic traits. Our analyses identified a total of 42 SNP loci that showed significant correlations with the five important agronomic flax traits. Next, candidate genes were screened in the 10 kb zone of each of the 42 SNP loci. These SNP loci were then analyzed by a more stringent screening via co-identification using both a general linear model (GLM and a mixed linear model (MLM as well as co-occurrences in at least two of the three environments, whereby 15 final candidate genes were obtained. Based on these results, we determined that UGT and PL are candidate genes for plant height, GRAS and XTH are candidate genes for the number of branches, Contig1437 and LU0019C12 are candidate genes for the number of fruits, and PHO1 is a candidate gene for the 1000-seed weight. We propose that the identified SNP loci and corresponding candidate genes might serve as a biological basis for improving crucial agronomic flax traits.

Crowd-sourced Ontology for Photoleukocoria: Identifying Common Internet Search Terms for a Potentially Important Pediatric Ophthalmic Sign.

Science.gov (United States)

Staffieri, Sandra E; Kearns, Lisa S; Sanfilippo, Paul G; Craig, Jamie E; Mackey, David A; Hewitt, Alex W

2018-02-01

Leukocoria is the most common presenting sign for pediatric eye disease including retinoblastoma and cataract, with worse outcomes if diagnosis is delayed. We investigated whether individuals could identify leukocoria in photographs (photoleukocoria) and examined their subsequent Internet search behavior. Using a web-based questionnaire, in this cross-sectional study we invited adults aged over 18 years to view two photographs of a child with photoleukocoria, and then search the Internet to determine a possible diagnosis and action plan. The most commonly used search terms and websites accessed were recorded. The questionnaire was completed by 1639 individuals. Facebook advertisement was the most effective recruitment strategy. The mean age of all respondents was 38.95 ± 14.59 years (range, 18-83), 94% were female, and 59.3% had children. An abnormality in the images presented was identified by 1613 (98.4%) participants. The most commonly used search terms were: "white," "pupil," "photo," and "eye" reaching a variety of appropriate websites or links to print or social media articles. Different words or phrases were used to describe the same observation of photoleukocoria leading to a range of websites. Variations in the description of observed signs and search words influenced the sites reached, information obtained, and subsequent help-seeking intentions. Identifying the most commonly used search terms for photoleukocoria is an important step for search engine optimization. Being directed to the most appropriate websites informing of the significance of photoleukocoria and the appropriate actions to take could improve delays in diagnosis of important pediatric eye disease such as retinoblastoma or cataract.

Anesthesiologists’ and surgeons’ perceptions about routine pre-operative testing in low-risk patients: application of the Theoretical Domains Framework (TDF to identify factors that influence physicians’ decisions to order pre-operative tests

Directory of Open Access Journals (Sweden)

Patey Andrea M

2012-06-01

Full Text Available Abstract Background Routine pre-operative tests for anesthesia management are often ordered by both anesthesiologists and surgeons for healthy patients undergoing low-risk surgery. The Theoretical Domains Framework (TDF was developed to investigate determinants of behaviour and identify potential behaviour change interventions. In this study, the TDF is used to explore anaesthesiologists’ and surgeons’ perceptions of ordering routine tests for healthy patients undergoing low-risk surgery. Methods Sixteen clinicians (eleven anesthesiologists and five surgeons throughout Ontario were recruited. An interview guide based on the TDF was developed to identify beliefs about pre-operative testing practices. Content analysis of physicians’ statements into the relevant theoretical domains was performed. Specific beliefs were identified by grouping similar utterances of the interview participants. Relevant domains were identified by noting the frequencies of the beliefs reported, presence of conflicting beliefs, and perceived influence on the performance of the behaviour under investigation. Results Seven of the twelve domains were identified as likely relevant to changing clinicians’ behaviour about pre-operative test ordering for anesthesia management. Key beliefs were identified within these domains including: conflicting comments about who was responsible for the test-ordering (Social/professional role and identity; inability to cancel tests ordered by fellow physicians (Beliefs about capabilities and social influences; and the problem with tests being completed before the anesthesiologists see the patient (Beliefs about capabilities and Environmental context and resources. Often, tests were ordered by an anesthesiologist based on who may be the attending anesthesiologist on the day of surgery while surgeons ordered tests they thought anesthesiologists may need (Social influences. There were also conflicting comments about the potential

Operational Research during the Ebola Emergency.

LENUS (Irish Health Repository)

Fitzpatrick, Gabriel

2017-07-01

Operational research aims to identify interventions, strategies, or tools that can enhance the quality, effectiveness, or coverage of programs where the research is taking place. Médecins Sans Frontières admitted ≈5,200 patients with confirmed Ebola virus disease during the Ebola outbreak in West Africa and from the beginning nested operational research within its emergency response. This research covered critical areas, such as understanding how the virus spreads, clinical trials, community perceptions, challenges within Ebola treatment centers, and negative effects on non-Ebola healthcare. Importantly, operational research questions were decided to a large extent by returning volunteers who had first-hand knowledge of the immediate issues facing teams in the field. Such a method is appropriate for an emergency medical organization. Many challenges were also identified while carrying out operational research across 3 different countries, including the basic need for collecting data in standardized format to enable comparison of findings among treatment centers.

Important Non-Technical Skills in Video-Assisted Thoracoscopic Surgery Lobectomy

DEFF Research Database (Denmark)

Gjeraa, Kirsten; Mundt, Anna S.; Spanager, Lene

2017-01-01

Background Safety in the operating room is dependent on the team's non-technical skills. The importance of non-technical skills appears to be different for minimally invasive surgery as compared with open surgery. The aim of this study was to identify which non-technical skills are perceived...... with complementary and overlapping scopes of practice between surgical and anesthesia subteams. Conclusions This study identified six non-technical skills that serve as the foundation for shared mental models of the patient, the current situation, and team resources. These findings contribute three important...... by team members to be most important for patient safety, in the setting of video-assisted thoracoscopic surgery (VATS) lobectomy. Methods This was an explorative, semistructured interview-based study with 21 participants from all four thoracic surgery centers in Denmark that perform VATS lobectomy. Data...

Lithium control during normal operation

International Nuclear Information System (INIS)

Suryanarayan, S.; Jain, D.

2010-01-01

Periodic increases in lithium (Li) concentrations in the primary heat transport (PHT) system during normal operation are a generic problem at CANDU® stations. Lithiated mixed bed ion exchange resins are used at stations for pH control in the PHT system. Typically tight chemistry controls including Li concentrations are maintained in the PHT water. The reason for the Li increases during normal operation at CANDU stations such as Pickering was not fully understood. In order to address this issue a two pronged approach was employed. Firstly, PNGS-A data and information from other available sources was reviewed in an effort to identify possible factors that may contribute to the observed Li variations. Secondly, experimental studies were carried out to assess the importance of these factors in order to establish reasons for Li increases during normal operation. Based on the results of these studies, plausible mechanisms/reasons for Li increases have been identified and recommendations made for proactive control of Li concentrations in the PHT system. (author)

Imaging-Based Screen Identifies Laminin 411 as a Physiologically Relevant Niche Factor with Importance for i-Hep Applications

Directory of Open Access Journals (Sweden)

John Ong

2018-03-01

Full Text Available Summary: Use of hepatocytes derived from induced pluripotent stem cells (i-Heps is limited by their functional differences in comparison with primary cells. Extracellular niche factors likely play a critical role in bridging this gap. Using image-based characterization (high content analysis; HCA of freshly isolated hepatocytes from 17 human donors, we devised and validated an algorithm (Hepatocyte Likeness Index; HLI for comparing the hepatic properties of cells against a physiological gold standard. The HLI was then applied in a targeted screen of extracellular niche factors to identify substrates driving i-Heps closer to the standard. Laminin 411, the top hit, was validated in two additional induced pluripotent stem cell (iPSC lines, primary tissue, and an in vitro model of α1-antitrypsin deficiency. Cumulatively, these data provide a reference method to control and screen for i-Hep differentiation, identify Laminin 411 as a key niche protein, and underscore the importance of combining substrates, soluble factors, and HCA when developing iPSC applications. : Rashid and colleagues demonstrate the utility of a high-throughput imaging platform for identification of physiologically relevant extracellular niche factors to advance i-Heps closer to their primary tissue counterparts. The extracellular matrix (ECM protein screen identified Laminin 411 as an important niche factor facilitating i-Hep-based disease modeling in vitro. Keywords: iPS hepatocytes, extracellular niche, image-based screening, disease modeling, laminin

A pupal transcriptomic screen identifies Ral as a target of store-operated calcium entry in Drosophila neurons

OpenAIRE

Richhariya, Shlesha; Jayakumar, Siddharth; Abruzzi, Katharine; Rosbash, Michael; Hasan, Gaiti

2017-01-01

Transcriptional regulation by Store-operated Calcium Entry (SOCE) is well studied in non-excitable cells. However, the role of SOCE has been poorly documented in neuronal cells with more complicated calcium dynamics. Previous reports demonstrated a requirement for SOCE in neurons that regulate Drosophila flight bouts. We refine this requirement temporally to the early pupal stage and use RNA-sequencing to identify SOCE mediated gene expression changes in the developing Drosophila pupal nervou...

An investigation in purchasing practices of small F&B operators ...

African Journals Online (AJOL)

The food and beverage (F&B) purchasing function is operating in a rapidly changing environment, whereby professionalisation and efficiency become key. This paper aims to identify generic skills that are most important for small F&B operators when it comes down to purchasing and supply management. Factors facilitating ...

Dam pre-release as an important operation strategy in reducing flood impact in Malaysia

Science.gov (United States)

Hidayah Ishak, Nurul; Mustafa Hashim, Ahmad

2018-03-01

The 2014 flood was reported to be one of the worst natural disaster has ever affected several states in the northern part of Peninsular Malaysia. Overwhelming rainfall was noted as one of the main factors causing such impact, which was claimed to be unprecedented to some extent. The state of Perak, which is blessed with four cascading dams had also experienced flood damage at a scale that was considered the worst in history. The rainfall received had caused the dam to reach danger level that necessitated additional discharge to be released. Safety of the dams was of great importance and such unavoidable additional discharge was allowed to avoid catastrophic failure of the dam structures. This paper discusses the dam pre-release as a significant dam management strategy in reducing flood impact. An important balance between required dam storage to be maintained and the risk element that can be afforded is the crucial factor in such enhanced operation strategy. While further possibility in developing a carefully engineered dam pre-release strategy can be explored for dam operation in Malaysia, this has already been introduced in some developed countries. Australia and South Africa are examples where pre-release has been practiced and proven to reduce flood risk. The concept involves controlling the dam lake level throughout the year, in reference to the rainfall data and the hydrological properties for the catchment area of the dams. Plentiful data analysis need to be done in contemplation of producing the optimal pre-release model. The amount of heavy rainfalls received is beyond human control but the distribution of the discharge from the dams can be further managed with the appropriate pre-release strategy.

ITER Operating Limits and Conditions

International Nuclear Information System (INIS)

Ciattaglia, S.; Barabaschi, P.; Carretero, J.A.

2006-01-01

The Operating Limits and Conditions (OLCs) are operating parameters and conditions, chosen among all system/components, which together define the domain of the safe operation of ITER in all foreseen ITER status (operation, maintenance, commissioning). At the same time they are selected to guarantee the required operation flexibility which is a critical factor for the success of an experimental machine such as ITER. System and components important for personnel or public safety (Safety Important Class, SIC) are identified from the overall plant safety analysis on functional importance to safety of the components. SIC classification has to be presented already inside the preliminary safety analysis report and approved by the licensing safety authority before the relevant construction. OLCs comprise the safety limits, i.e. that if exceeded could result in a potential safety hazard, the relevant settings that determine the intervention of SIC systems and the operational limits on equipment which warn from or stop a functional departure from a planned operational status that could challenge equipment and functions. The safety limits have to indicate clearly states that leave the nominal safety state of ITER; they are derived from the safety analysis of ITER. OLCs can represent in some cases few parameters grouping together. Some operational conditions, e.g. inventories, will be controlled through no real time measurements and procedures. Operating experience from present tokamaks, in particular JET, and from nuclear plants is considered at the maximum possible extent. This paper presents the guidelines to develop the ITER OLCs with particular reference to safety limits. A few examples are reported as well as open issues on some OLCs control and measurement and the relevant R-and-D planned to solve the issues. (author)

The Promise of Virtual Teams: Identifying Key Factors in Effectiveness and Failure

Science.gov (United States)

Horwitz, Frank M.; Bravington, Desmond; Silvis, Ulrik

2006-01-01

Purpose: The aim of the investigation is to identify enabling and disenabling factors in the development and operation of virtual teams; to evaluate the importance of factors such as team development, cross-cultural variables, leadership, communication and social cohesion as contributors to virtual team effectiveness. Design/methodology/approach:…

Systematic reviews identify important methodological flaws in stroke rehabilitation therapy primary studies: review of reviews.

Science.gov (United States)

Santaguida, Pasqualina; Oremus, Mark; Walker, Kathryn; Wishart, Laurie R; Siegel, Karen Lohmann; Raina, Parminder

2012-04-01

A "review of reviews" was undertaken to assess methodological issues in studies evaluating nondrug rehabilitation interventions in stroke patients. MEDLINE, CINAHL, PsycINFO, and the Cochrane Database of Systematic Reviews were searched from January 2000 to January 2008 within the stroke rehabilitation setting. Electronic searches were supplemented by reviews of reference lists and citations identified by experts. Eligible studies were systematic reviews; excluded citations were narrative reviews or reviews of reviews. Review characteristics and criteria for assessing methodological quality of primary studies within them were extracted. The search yielded 949 English-language citations. We included a final set of 38 systematic reviews. Cochrane reviews, which have a standardized methodology, were generally of higher methodological quality than non-Cochrane reviews. Most systematic reviews used standardized quality assessment criteria for primary studies, but not all were comprehensive. Reviews showed that primary studies had problems with randomization, allocation concealment, and blinding. Baseline comparability, adverse events, and co-intervention or contamination were not consistently assessed. Blinding of patients and providers was often not feasible and was not evaluated as a source of bias. The eligible systematic reviews identified important methodological flaws in the evaluated primary studies, suggesting the need for improvement of research methods and reporting. Copyright © 2012 Elsevier Inc. All rights reserved.

Evaluation of factors important to enhance productivity

Directory of Open Access Journals (Sweden)

Sanjay Kumar

2016-12-01

Full Text Available Productivity as a measure for output is important to industry and academia. In this research, factors to enhance productivity have been identified from the literature by reviewing various international and national sources to explore this evergreen field of research that is “productivity,” which has always been an increasingly interesting area of research for researchers over decades or perhaps over centuries. In total, 15 number of factors have been identified to enhance productivity. Analytic hierarchy process approach has been appropriately chosen to rank these factors because of its simplicity and effectiveness. The tool has been used by taking perception of experts from the Indian manufacturing industry. Positive attitude and involvement of management, proactive employees, and good working conditions have been ranked as top three factors as per the experts’ opinion. The ranking of factors to enhance productivity, categorization of the factors into four perspectives, and hierarchy of perspective and action plan as a final outcome of the paper may help academia and operations managers toward effective management of “operations and production activities of firms/supply chains.”

Data mining of air traffic control operational errors

Science.gov (United States)

2006-01-01

In this paper we present the results of : applying data mining techniques to identify patterns and : anomalies in air traffic control operational errors (OEs). : Reducing the OE rate is of high importance and remains a : challenge in the aviation saf...

IE Information No. 86-71: Recent identified problems with Limitorque motor operators

International Nuclear Information System (INIS)

Jordan, E.L.

1992-01-01

This notice is provided to alert recipients of two potential problems discovered with Limitorque motor operators. On November 8, 1985 Georgia Power Company submitted a preliminary report to the NRC indicating that it had discovered burn damage to internal wiring in several Limitorque motor operators installed in their Vogtle Unit 1 Power Plant. On March 20, 1986 Georgia Power Company submitted a final report to the NRC which suggested that the burn damage was a generic problem applicable to all Limitorque motor operators. This assumption was based on a sampling inspection of 104 Limitorque motor operators installed in Vogtle Unit 1. Forty-six of the motor operators examined were Limitorque type SMB-000, and six of these were found to have burnt internal wiring. Out of the 58 operators other than type SMB-000 which were inspected, 5 were found to contain wires deemed susceptible to damage because of their close proximity to the heater elements (less than 1/2 inch). Several licensees have submitted reports to the NRC concerning a problem with cracked limit switch rotors on Limitorque motor operators installed inside and outside of containment. The limit switches are used for control of the motor operator and also provide indication of valve position in the control room. The cracks have been found on white melamine limit switch rotors. Most of these cracks were found in the area where the limit switch rotors are pinned to the pinion shafts. Some cracks have been found to extend halfway through the melamine rotors, weakening them to the extent that they are easily broken

Services Acquisition in the Department of Defense: Analysis of Operational and Performance Data to Identify Drivers of Success

Science.gov (United States)

2015-03-24

improving the disclosure of CPARS program office Audit results (Black et al., 2014, pp. 48–49). Acquisition Research Program Graduate School of...improving the disclosure of CPARS program office audit results (Black et al., 2014, pp. 44–49). Recommendations Based on our conclusions, we identified...Fitzsimmons, J. A., & Fitzsimmons, M. J. (2006). Service management: Operations, strategy, and information technology (5th ed.). New York, NY: McGraw -Hill

Operator performance evaluation using multi criteria decision making methods

Science.gov (United States)

Rani, Ruzanita Mat; Ismail, Wan Rosmanira; Razali, Siti Fatihah

2014-06-01

Operator performance evaluation is a very important operation in labor-intensive manufacturing industry because the company's productivity depends on the performance of its operators. The aims of operator performance evaluation are to give feedback to operators on their performance, to increase company's productivity and to identify strengths and weaknesses of each operator. In this paper, six multi criteria decision making methods; Analytical Hierarchy Process (AHP), fuzzy AHP (FAHP), ELECTRE, PROMETHEE II, Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) and VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR) are used to evaluate the operators' performance and to rank the operators. The performance evaluation is based on six main criteria; competency, experience and skill, teamwork and time punctuality, personal characteristics, capability and outcome. The study was conducted at one of the SME food manufacturing companies in Selangor. From the study, it is found that AHP and FAHP yielded the "outcome" criteria as the most important criteria. The results of operator performance evaluation showed that the same operator is ranked the first using all six methods.

The GOES-R/JPSS Approach for Identifying Hazardous Low Clouds: Overview and Operational Impacts

Science.gov (United States)

Calvert, Corey; Pavolonis, Michael; Lindstrom, Scott; Gravelle, Chad; Terborg, Amanda

2017-04-01

Low ceiling and visibility is a weather hazard that nearly every forecaster, in nearly every National Weather Service (NWS) Weather Forecast Office (WFO), must regularly address. In addition, national forecast centers such as the Aviation Weather Center (AWC), Alaska Aviation Weather Unit (AAWU) and the Ocean Prediction Center (OPC) are responsible for issuing low ceiling and visibility related products. As such, reliable methods for detecting and characterizing hazardous low clouds are needed. Traditionally, hazardous areas of Fog/Low Stratus (FLS) are identified using a simple stand-alone satellite product that is constructed by subtracting the 3.9 and 11 μm brightness temperatures. However, the 3.9-11 μm brightness temperature difference (BTD) has several major limitations. In an effort to address the limitations of the BTD product, the GOES-R Algorithm Working Group (AWG) developed an approach that fuses satellite, Numerical Weather Prediction (NWP) model, Sea Surface Temperature (SST) analyses, and other data sets (e.g. digital surface elevation maps, surface emissivity maps, and surface type maps) to determine the probability that hazardous low clouds are present using a naïve Bayesian classifier. In addition, recent research has focused on blending geostationary (e.g. GOES-R) and low earth orbit (e.g. JPSS) satellite data to further improve the products. The FLS algorithm has adopted an enterprise approach in that it can utilize satellite data from a variety of current and future operational sensors and NWP data from a variety of models. The FLS products are available in AWIPS/N-AWIPS/AWIPS-II and have been evaluated within NWS operations over the last four years as part of the Satellite Proving Ground. Forecaster feedback has been predominantly positive and references to these products within Area Forecast Discussions (AFD's) indicate that the products are influencing operational forecasts. At the request of the NWS, the FLS products are currently being

Role of computerized operator support system in nuclear industry

International Nuclear Information System (INIS)

Kossilov, A.

1994-01-01

Many existing and all new nuclear stations have a high degree of automation leading to substantial safety and operational benefits. Various operator support systems (OSSs) for nuclear power plants are already operational or under development in the Member States. OSSs are based on intelligent data processing and in addition to plant operation, they are becoming more important for safety also. A key feature of OSSs is their availability to structure data to increase its relevance to a given situation. This can improve the user's ability to identify plant function, systems and component state and to identify faults and diagnose them. OSSs can also assist the user to plan and implement corrective actions to improve NPP availability and safety. The paper describes several such systems or functions either in operation or under development phase as well as a way in which new artificial intelligence-based software techniques will enhance the support possible for providing to the operator. (author). 4 refs

Monitoring of the operation of a nuclear power station with design problems in an importing country: The Almaraz power station

International Nuclear Information System (INIS)

Reig, J.

1984-01-01

The purpose of this paper is to describe the regulatory activities carried out in Spain as a result of the design problem occurring in the steam generators during operation of Unit I of the Almaraz nuclear power station. First, a brief introduction is given to the operating history and characteristics of Unit I of Almaraz. Particular attention is paid to the specific licences issued subsequent to commercial operation which place limitations on the operation of the station and to the operational incidents of which the Nuclear Safety Council (CSN) has been notified. Next, a description is provided of the safety evaluation carried out by the CSN. Three aspects merit particular attention: methodology, evaluation and conclusions. The methodology applied by an importing country is normally based on that of the country of origin of the design, so that the overall evaluation by the NRC has been considered sufficiently representative of aspects specific to the Almaraz power station. In this regard the importance of international collaboration is clearly seen as a principal instrument for performing the evaluation. In the evaluation a distinction is made between general and specific aspects and between inspection programmes and quality assurance requirements. In addition, the conclusions leading to the requirement of the imposition of additional limitations on the operating licence are stated. Apart from the safety evaluation carried out by the CSN, other regulatory activities have been performed over this two-year period. These activities, which include site inspections, audits of the principal supplier company, other independent calculations and so on, are described. Lastly, the paper refers to the lessons learned from the operation of the above-mentioned unit, which are immediately applicable to other Spanish nuclear power stations. (author)

Identifying cognitive complexity factors affecting the complexity of procedural steps in emergency operating procedures of a nuclear power plant

International Nuclear Information System (INIS)

Park, Jinkyun; Jeong, Kwangsup; Jung, Wondea

2005-01-01

In complex systems such as a nuclear and chemical plant, it is well known that the provision of understandable procedures that allow operators to clarify what needs to be done and how to do it is one of the requisites to secure their safety. As a previous study in providing understandable procedures, the step complexity (SC) measure that can quantify the complexity of procedural steps in emergency operating procedures (EOPs) of a nuclear power plant (NPP) was suggested. However, the necessity of additional complexity factors that can consider a cognitive aspect in evaluating the complexity of procedural steps is raised. To this end, the comparisons between operators' performance data measured by the form of a step performance time with their behavior in carrying out the prescribed activities of procedural steps are conducted in this study. As a result, two kinds of complexity factors (the abstraction level of knowledge and the level of engineering decision) that could affect an operator's cognitive burden are identified. Although a well-designed experiment is indispensable for confirming the appropriateness of the additional complexity factors, it is strongly believed that the change of operators' performance data can be more authentically explained if the additional complexity factors are taken into consideration

Identifying cognitive complexity factors affecting the complexity of procedural steps in emergency operating procedures of a nuclear power plant

Energy Technology Data Exchange (ETDEWEB)

Park, Jinkyun [Integrated Safety Assessment Division, Korea Atomic Energy Research Institute, P.O. Box 105, Duckjin-Dong, Yusong-Ku, Taejon 305-600 (Korea, Republic of)]. E-mail: kshpjk@kaeri.re.kr; Jeong, Kwangsup [Integrated Safety Assessment Division, Korea Atomic Energy Research Institute, P.O. Box 105, Duckjin-Dong, Yusong-Ku, Taejon 305-600 (Korea, Republic of); Jung, Wondea [Integrated Safety Assessment Division, Korea Atomic Energy Research Institute, P.O. Box 105, Duckjin-Dong, Yusong-Ku, Taejon 305-600 (Korea, Republic of)

2005-08-01

In complex systems such as a nuclear and chemical plant, it is well known that the provision of understandable procedures that allow operators to clarify what needs to be done and how to do it is one of the requisites to secure their safety. As a previous study in providing understandable procedures, the step complexity (SC) measure that can quantify the complexity of procedural steps in emergency operating procedures (EOPs) of a nuclear power plant (NPP) was suggested. However, the necessity of additional complexity factors that can consider a cognitive aspect in evaluating the complexity of procedural steps is raised. To this end, the comparisons between operators' performance data measured by the form of a step performance time with their behavior in carrying out the prescribed activities of procedural steps are conducted in this study. As a result, two kinds of complexity factors (the abstraction level of knowledge and the level of engineering decision) that could affect an operator's cognitive burden are identified. Although a well-designed experiment is indispensable for confirming the appropriateness of the additional complexity factors, it is strongly believed that the change of operators' performance data can be more authentically explained if the additional complexity factors are taken into consideration.

Identifying cognitive complexity factors affecting the complexity of procedural steps in emergency operating procedures of a nuclear power plant

Energy Technology Data Exchange (ETDEWEB)

Jinkyun Park; Kwangsup Jeong; Wondea Jung [Korea Atomic Energy Research Institute, Taejon (Korea). Integrated Safety Assessment Division

2005-08-15

In complex systems such as a nuclear and chemical plant, it is well known that the provision of understandable procedures that allow operators to clarify what needs to be done and how to do it is one of the requisites to secure their safety. As a previous study in providing understandable procedures, the step complexity (SC) measure that can quantify the complexity of procedural steps in emergency operating procedures (EOPs) of a nuclear power plant (NPP) was suggested. However, the necessity of additional complexity factors that can consider a cognitive aspect in evaluating the complexity of procedural steps is raised. To this end, the comparisons between operator' performance data measured by the form of a step performance time with their behavior in carrying out the prescribed activities of procedural steps are conducted in this study. As a result, two kinds of complexity factors (the abstraction level of knowledge and the level of engineering decision) that could affect an operator's cognitive burden are identified. Although a well-designed experiment is indispensable for confirming the appropriateness of the additional complexity factors, it is strongly believed that the change of operators' performance data can be more authentically explained if the additional complexity factors are taken into consideration. (author)

Global sensitivity analysis for identifying important parameters of nitrogen nitrification and denitrification under model uncertainty and scenario uncertainty

Science.gov (United States)

Chen, Zhuowei; Shi, Liangsheng; Ye, Ming; Zhu, Yan; Yang, Jinzhong

2018-06-01

Nitrogen reactive transport modeling is subject to uncertainty in model parameters, structures, and scenarios. By using a new variance-based global sensitivity analysis method, this paper identifies important parameters for nitrogen reactive transport with simultaneous consideration of these three uncertainties. A combination of three scenarios of soil temperature and two scenarios of soil moisture creates a total of six scenarios. Four alternative models describing the effect of soil temperature and moisture content are used to evaluate the reduction functions used for calculating actual reaction rates. The results show that for nitrogen reactive transport problem, parameter importance varies substantially among different models and scenarios. Denitrification and nitrification process is sensitive to soil moisture content status rather than to the moisture function parameter. Nitrification process becomes more important at low moisture content and low temperature. However, the changing importance of nitrification activity with respect to temperature change highly relies on the selected model. Model-averaging is suggested to assess the nitrification (or denitrification) contribution by reducing the possible model error. Despite the introduction of biochemical heterogeneity or not, fairly consistent parameter importance rank is obtained in this study: optimal denitrification rate (Kden) is the most important parameter; reference temperature (Tr) is more important than temperature coefficient (Q10); empirical constant in moisture response function (m) is the least important one. Vertical distribution of soil moisture but not temperature plays predominant role controlling nitrogen reaction. This study provides insight into the nitrogen reactive transport modeling and demonstrates an effective strategy of selecting the important parameters when future temperature and soil moisture carry uncertainties or when modelers face with multiple ways of establishing nitrogen

Pilot program to identify valve failures which impact the safety and operation of light water nuclear power plants

International Nuclear Information System (INIS)

Tsacoyeanes, J.C.; Raju, P.P.

1980-04-01

The pilot program described has been initiated under the Department of Energy Light Water Reactor Safety Research and Development Program and has the following specific objectives: to identify the principal types and causes of failures in valves, valve operators and their controls and associated hardware, which lead to, or could lead to plant trip; and to suggest possible remedies for the prevention of these failures and recommend future research and development programs which could lead to minimizing these valve failures or mitigating their effect on plant operation. The data surveyed cover incidents reported over the six-year period, beginning 1973 through the end of 1978. Three sources of information on valve failures have been consulted: failure data centers, participating organizations in the nuclear power industry, and technical documents

On-line method to identify control rod drops in Pressurized Water Reactors

International Nuclear Information System (INIS)

Souza, T.J.; Martinez, A.S.; Medeiros, J.A.C.C.; Palma, D.A.P.; Gonçalves, A.C.

2014-01-01

Highlights: • On-line method to identify control rod drops in PWR reactors. • Identification method based on the readings of the ex-core detector. • Recognition of the patterns in the ex-core detector responses. - Abstract: A control rod drop event in PWR reactors leads to an unsafe operating condition. It is important to quickly identify the rod to minimise undesirable effects in such a scenario. The goal of this work is to develop an online method to identify control rod drops in PWR reactors. The method entails the construction of a tool based on ex-core detector responses. It proposes to recognize patterns in the neutron ex-core detectors responses and thus to make an online identification of a control rod drop in the core during the reactor operation. The results of the study, as well as the behaviour of the detector responses demonstrated the feasibility of this method

Identifying 21st Century STEM Competencies Using Workplace Data

Science.gov (United States)

Jang, Hyewon

2016-04-01

Gaps between science, technology, engineering, and mathematics (STEM) education and required workplace skills have been identified in industry, academia, and government. Educators acknowledge the need to reform STEM education to better prepare students for their future careers. We pursue this growing interest in the skills needed for STEM disciplines and ask whether frameworks for 21st century skills and engineering education cover all of important STEM competencies. In this study, we identify important STEM competencies and evaluate the relevance of current frameworks applied in education using the standardized job-specific database operated and maintained by the US Department of Labor. Our analysis of the importance of 109 skills, types of knowledge and work activities, revealed 18 skills, seven categories of knowledge, and 27 work activities important for STEM workers. We investigate the perspectives of STEM and non-STEM job incumbents, comparing the importance of each skill, knowledge, and work activity for the two groups. We aimed to condense dimensions of the 52 key areas by categorizing them according to the Katz and Kahn (1978) framework and testing for inter-rater reliability. Our findings show frameworks for 21st century skills and engineering education do not encompass all important STEM competencies. Implications for STEM education programs are discussed, including how they can bridge gaps between education and important workplace competencies.

The strategic importance of identifying knowledge-based and intangible assets for generating value, competitiveness and innovation in sub-Saharan Africa

Directory of Open Access Journals (Sweden)

Nicoline Ondari-Okemwa

2011-01-01

Full Text Available This article discusses the strategic importance of identifying intangible assets for creating value and enhancing competitiveness and innovation in science and technology in a knowledge economy with particular reference to the sub- Saharan Africa region. It has always been difficult to gather the prerequisite information to manage such assets and create value from them. The paper discusses the nature of intangible assets, the characteristics of a knowledge economy and the role of knowledge workers in a knowledge economy. The paper also discusses the importance of identifying intangible assets in relation to capturing the value of such assets, the transfer of intangible assets to other owners and the challenges of managing organizational intangible assets. Objectives of the article include: underscoring the strategic importance of identifying intangible assets in sub-Saharan Africa; examining the performance of intangible assets in a knowledge economy; how intangible assets may generate competitiveness, economic growth and innovation; and assess how knowledge workers are becoming a dominant factor in the knowledge economy. An extensive literature review was employed to collect data for this article. It is concluded in the article that organizations and governments in sub-Saharan Africa should look at knowledge-based assets as strategic resources, even though the traditional accounting systems may still be having problems in determining the exact book value of such assets. It is recommended that organizations and government departments in sub-Saharan Africa should implement a system of the reporting of the value of intangible organizational assets just like the reporting of the value of tangible assets; and that organizations in sub-Saharan Africa should use knowledge to produce “smart products and services” which command premium prices.

A Data Filter for Identifying Steady-State Operating Points in Engine Flight Data for Condition Monitoring Applications

Science.gov (United States)

Simon, Donald L.; Litt, Jonathan S.

2010-01-01

This paper presents an algorithm that automatically identifies and extracts steady-state engine operating points from engine flight data. It calculates the mean and standard deviation of select parameters contained in the incoming flight data stream. If the standard deviation of the data falls below defined constraints, the engine is assumed to be at a steady-state operating point, and the mean measurement data at that point are archived for subsequent condition monitoring purposes. The fundamental design of the steady-state data filter is completely generic and applicable for any dynamic system. Additional domain-specific logic constraints are applied to reduce data outliers and variance within the collected steady-state data. The filter is designed for on-line real-time processing of streaming data as opposed to post-processing of the data in batch mode. Results of applying the steady-state data filter to recorded helicopter engine flight data are shown, demonstrating its utility for engine condition monitoring applications.

WANO Activities Related to Identifying and Reducing the Likelihood for Recurring Events

International Nuclear Information System (INIS)

Llewellyn, Michael

2003-01-01

Since its inception, WANO has encouraged members to share operating experience and events information through the WANO Operating Experience Programme. Preventing recurring events is a prime reason for sharing events information. Over 2500 events have been shared through WANO since 1989. However, a review of WANO activities in 1997 identified that this information was not being used very well by WANO members, and that WANO was not adding much 'value' to the events sharing process. At the time, WANO only provided the 'postal exchange' function for events sharing, and was not reviewing events across WANO to help members focus on the really important issues. Often, these very important issues involve recurring events. As a result of the 1997 review of the WANO operating experience process, WANO re-sourced and developed new analysis capabilities and began producing new types of reports for its members. The resource commitment includes four seconded engineers (one from each WANO Regional Centre) brought to Paris to staff a WANO Operating Experience Central Team. This team analyses events across WANO, writes WANO event reports, provides operating experience-related training, and provides technical support to members to improve their use of operating experience information. One focus area for events analysis by WANO is the identification and subsequent industry notification of recurring events. As a result of the 1997 review of WANO activities, in 1998 WANO began production of several new types of event-based reports to communicate significant industry events to our members. A key focus of analysis of these significant events is whether they are recurring events (that is, very similar to previous events either at that NPP or another NPP in the industry). The reports are called Significant Operating Experience Reports (SOERs) and Significant Event Reports (SERs). Significant Operating Experience Reports (SOERs) are written by WANO when several event reports indicate that

OPERATIONAL RESTRICTIONS FOR REDUCING NOISE AND THE SAFETY OF AIR OPERATIONS

Directory of Open Access Journals (Sweden)

Anna KWASIBORSKA

2017-03-01

Full Text Available Many European airports are located in close proximity to residential or protected areas. Aircraft noise emissions caused by the landing and taking off of aircraft are a big problem in these areas. From an operational point of view, the method for reducing noise is to reduce traffic volume or change its organization, especially during the night. Some procedures and tools have been developed to support air traffic management in the implementation of operational constraints necessary to maintain noise at an acceptable level. The objective of this paper is to analyse the effectiveness of these tools. For this purpose, we have analysed existing methods of operational noise reduction, taking into account their influence on the structure, smoothness, punctuality and, especially, the safety of air traffic. As a result, existing risks have been identified, while methods have been proposed to combine two important air traffic service tasks: ensuring safety, while taking into account the environmental constraints, especially in relation to the acoustic climate.

The importance of the reliability study for the safety operation of chemical plants. Application in heavy water plants

International Nuclear Information System (INIS)

Dumitrescu, Maria; Lazar, Roxana Elena; Preda, Irina Aida; Stefanescu, Ioan

1999-01-01

Heavy water production in Romania is based on H 2 O-H 2 S isotopic exchange process followed by vacuum isotopic distillation. The heavy water plant are complex chemical systems, characterized by an ensemble of static and dynamic equipment, AMC components, enclosures. Such equipment must have a high degree of reliability, a maximum safety in technological operation and a high availability index. Safety, reliable and economical operation heavy water plants need to maintain the systems and the components at adequate levels of reliability. The paper is a synthesis of the qualitative and quantitative assessment reliability studies for heavy water plants. The operation analysis on subsystems, each subsystems being a well-defined unit, is required by the plant complexity. For each component the reliability indicators were estimated by parametric and non-parametric methods based on the plant operation data. Also, the reliability qualitative and quantitative assessment was done using the fault tree technique. For the dual temperature isotopic exchange plants the results indicate an increase of the MTBF after the first years of operation, illustrating both the operation experience increasing and maintenance improvement. Also a high degree of availability was illustrated by the reliability studies of the vacuum distillation plant. The establishment of the reliability characteristics for heavy water plant represents an important step, a guide for highlighting the elements and process liable to failure being at the same time a planning modality to correlate the control times with the maintenance operations. This is the way to minimise maintenance, control and costs. The main purpose of the reliability study was the safety increase of the plant operation and the support for decision making. (authors)

Mass and number size distributions of emitted particulates at five important operation units in a hazardous industrial waste incineration plant.

Science.gov (United States)

Lin, Chi-Chi; Huang, Hsiao-Lin; Hsiao, Wen-Yuan

2016-01-01

Past studies indicated particulates generated by waste incineration contain various hazardous compounds. The aerosol characteristics are very important for particulate hazard control and workers' protection. This study explores the detailed characteristics of emitted particulates from each important operation unit in a rotary kiln-based hazardous industrial waste incineration plant. A dust size analyzer (Grimm 1.109) and a scanning mobility particle sizer (SMPS) were used to measure the aerosol mass concentration, mass size distribution, and number size distribution at five operation units (S1-S5) during periods of normal operation, furnace shutdown, and annual maintenance. The place with the highest measured PM10 concentration was located at the area of fly ash discharge from air pollution control equipment (S5) during the period of normal operation. Fine particles (PM2.5) constituted the majority of the emitted particles from the incineration plant. The mass size distributions (elucidated) made it clear that the size of aerosols caused by the increased particulate mass, resulting from work activities, were mostly greater than 1.5 μm. Whereas the number size distributions showed that the major diameters of particulates that caused the increase of particulate number concentrations, from work activities, were distributed in the sub micrometer range. The process of discharging fly ash from air pollution control equipment can significantly increase the emission of nanoparticles. The mass concentrations and size distributions of emitted particulates were different at each operation unit. This information is valuable for managers to take appropriate strategy to reduce the particulate emission and associated worker exposure.

Quality function deployment in launch operations

Science.gov (United States)

Portanova, P. L.; Tomei, E. J., Jr.

1990-11-01

The goal of the Advanced Launch System (ALS) is a more efficient launch capability that provides a highly reliable and operable system at substantially lower cost than current launch systems. Total Quality Management (TQM) principles are being emphasized throughout the ALS program. A continuous improvement philosophy is directed toward satisfying users' and customer's requirements in terms of quality, performance, schedule, and cost. Quality Function Deployment (QFD) is interpreted as the voice of the customer (or user), and it is an important planning tool in translating these requirements throughout the whole process of design, development, manufacture, and operations. This report explores the application of QFD methodology to launch operations, including the modification and addition of events (operations planning) in the engineering development cycle, and presents an informal status of study results to date. QFD is a technique for systematically analyzing the customer's (Space Command) perceptions of what constitutes a highly reliable and operable system and functionally breaking down those attributes to identify the critical characteristics that determine an efficient launch system capability. In applying the principle of QFD, a series of matrices or charts are developed with emphasis on the one commonly known as the House of Quality (because of its roof-like format), which identifies and translates the most critical information.

The knowledge-based framework for a nuclear power plant operator advisor

International Nuclear Information System (INIS)

Miller, D.W.

1989-01-01

An important facet in the design, development, and evaluation of aids for complex systems is the identification of the tasks performed by the operator. Operator aids utilizing artificial intelligence, or more specifically knowledge-based systems, require identification of these tasks in the context of a knowledge-based framework. In this context, the operator responses to the plant behavior are to monitor and comprehend the state of the plant, identify normal and abnormal plant conditions, diagnose abnormal plant conditions, predict plant response to specific control actions, and select the best available control action, implement a feasible control action, monitor system response to the control action, and correct for any inappropriate responses. These tasks have been identified to formulate a knowledge-based framework for an operator advisor under development at Ohio State University that utilizes the generic task methodology proposed by Chandrasekaran. The paper lays the foundation to identify the responses as a knowledge-based set of tasks in accordance with the expected human operator responses during an event. Initial evaluation of the expert system indicates the potential for an operator aid that will improve the operator's ability to respond to both anticipated and unanticipated events

Statistical analyses of scatterplots to identify important factors in large-scale simulations, 1: Review and comparison of techniques

International Nuclear Information System (INIS)

Kleijnen, J.P.C.; Helton, J.C.

1999-01-01

Procedures for identifying patterns in scatterplots generated in Monte Carlo sensitivity analyses are described and illustrated. These procedures attempt to detect increasingly complex patterns in scatterplots and involve the identification of (i) linear relationships with correlation coefficients, (ii) monotonic relationships with rank correlation coefficients, (iii) trends in central tendency as defined by means, medians and the Kruskal-Wallis statistic, (iv) trends in variability as defined by variances and interquartile ranges, and (v) deviations from randomness as defined by the chi-square statistic. A sequence of example analyses with a large model for two-phase fluid flow illustrates how the individual procedures can differ in the variables that they identify as having effects on particular model outcomes. The example analyses indicate that the use of a sequence of procedures is a good analysis strategy and provides some assurance that an important effect is not overlooked

Operating and maintenance experience with computer-based systems in nuclear power plants - A report by the PWG-1 Task Group on Computer-based Systems Important to Safety

International Nuclear Information System (INIS)

1998-01-01

This report was prepared by the Task Group on Computer-based Systems Important to Safety of the Principal Working Group No. 1. Canada had a leading role in this study. Operating and Maintenance Experience with Computer-based Systems in nuclear power plants is essential for improving and upgrading against potential failures. The present report summarises the observations and findings related to the use of digital technology in nuclear power plants. It also makes recommendations for future activities in Member Countries. Continued expansion of digital technology in nuclear power reactor has resulted in new safety and licensing issues, since the existing licensing review criteria were mainly based on the analogue devices used when the plants were designed. On the industry side, a consensus approach is needed to help stabilise and standardise the treatment of digital installations and upgrades while ensuring safety and reliability. On the regulatory side, new guidelines and regulatory requirements are needed to assess digital upgrades. Upgrades or new installation issues always involve potential for system failures. They are addressed specifically in the 'hazard' or 'failure' analysis, and it is in this context that they ultimately are resolved in the design and addressed in licensing. Failure Analysis is normally performed in parallel with the design, verification and validation (V and V), and implementation activities of the upgrades. Current standards and guidelines in France, U.S. and Canada recognise the importance of failure analysis in computer-based system design. Thus failure analysis is an integral part of the design and implementation process and is aimed at evaluating potential failure modes and cause of system failures. In this context, it is essential to define 'System' as the plant system affected by the upgrade, not the 'Computer' system. The identified failures would provide input to the design process in the form of design requirements or design

Using Operational Analysis to Improve Access to Pulmonary Function Testing

Directory of Open Access Journals (Sweden)

Ada Ip

2016-01-01

Full Text Available Background. Timely pulmonary function testing is crucial to improving diagnosis and treatment of pulmonary diseases. Perceptions of poor access at an academic pulmonary function laboratory prompted analysis of system demand and capacity to identify factors contributing to poor access. Methods. Surveys and interviews identified stakeholder perspectives on operational processes and access challenges. Retrospective data on testing demand and resource capacity was analyzed to understand utilization of testing resources. Results. Qualitative analysis demonstrated that stakeholder groups had discrepant views on access and capacity in the laboratory. Mean daily resource utilization was 0.64 (SD 0.15, with monthly average utilization consistently less than 0.75. Reserved testing slots for subspecialty clinics were poorly utilized, leaving many testing slots unfilled. When subspecialty demand exceeded number of reserved slots, there was sufficient capacity in the pulmonary function schedule to accommodate added demand. Findings were shared with stakeholders and influenced scheduling process improvements. Conclusion. This study highlights the importance of operational data to identify causes of poor access, guide system decision-making, and determine effects of improvement initiatives in a variety of healthcare settings. Importantly, simple operational analysis can help to improve efficiency of health systems with little or no added financial investment.

Development of the Operational Events Groups Ranking Tool

International Nuclear Information System (INIS)

Simic, Zdenko; Banov, Reni

2014-01-01

Both because of complexity and ageing, facilities like nuclear power plants require feedback from the operating experience in order to further improve safety and operation performance. That is the reason why significant effort is dedicated to operating experience feedback. This paper contains description of the specification and development of the application for the operating events ranking software tool. Robust and consistent way of selecting most important events for detail investigation is important because it is not feasible or even useful to investigate all of them. Development of the tool is based on the comprehensive events characterisation and methodical prioritization. This includes rich set of events parameters which allow their top level preliminary analysis, different ways of groupings and even to evaluate uncertainty propagation to the ranking results. One distinct feature of the implemented method is that user (i.e., expert) could determine how important is particular ranking parameter based on their pairwise comparison. For tools demonstration and usability it is crucial that sample database is also created. For useful analysis the whole set of events for 5 years is selected and characterised. Based on the preliminary results this tool seems valuable for new preliminary prospective on data as whole, and especially for the identification of events groups which should have priority in the more detailed assessment. The results are consisting of different informative views on the events groups importance and related sensitivity and uncertainty results. This presents valuable tool for improving overall picture about specific operating experience and also for helping identify the most important events groups for further assessment. It is clear that completeness and consistency of the input data characterisation is very important to get full and valuable importance ranking. Method and tool development described in this paper is part of continuous effort of

Identifying selectively important amino acid positions associated with alternative habitat environments in fish mitochondrial genomes.

Science.gov (United States)

Xia, Jun Hong; Li, Hong Lian; Zhang, Yong; Meng, Zi Ning; Lin, Hao Ran

2018-05-01

Fish species inhabitating seawater (SW) or freshwater (FW) habitats have to develop genetic adaptations to alternative environment factors, especially salinity. Functional consequences of the protein variations associated with habitat environments in fish mitochondrial genomes have not yet received much attention. We analyzed 829 complete fish mitochondrial genomes and compared the amino acid differences of 13 mitochondrial protein families between FW and SW fish groups. We identified 47 specificity determining sites (SDS) that associated with FW or SW environments from 12 mitochondrial protein families. Thirty-two (68%) of the SDS sites are hydrophobic, 13 (28%) are neutral, and the remaining sites are acidic or basic. Seven of those SDS from ND1, ND2 and ND5 were scored as probably damaging to the protein structures. Furthermore, phylogenetic tree based Bayes Empirical Bayes analysis also detected 63 positive sites associated with alternative habitat environments across ten mtDNA proteins. These signatures could be important for studying mitochondrial genetic variation relevant to fish physiology and ecology.

Identifying and Characterizing Important Trembling Aspen Competitors with Juvenile Lodgepole Pine in Three South-Central British Columbia Ecosystems

Directory of Open Access Journals (Sweden)

Teresa A. Newsome

2012-01-01

Full Text Available Critical height ratios for predicting competition between trembling aspen and lodgepole pine were identified in six juvenile stands in three south-central British Columbia ecosystems. We used a series of regression analyses predicting pine stem diameter from the density of neighbouring aspen in successively shorter relative height classes to identify the aspen-pine height ratio that maximized R2. Critical height ratios varied widely among sites when stands were 8–12 years old but, by age 14–19, had converged at 1.25–1.5. Maximum R2 values at age 14–19 ranged from 13.4% to 69.8%, demonstrating that the importance of aspen competition varied widely across a relatively small geographic range. Logistic regression also indicated that the risk of poor pine vigour in the presence of aspen varied between sites. Generally, the degree of competition, risk to pine vigour, and size of individual aspen contributing to the models declined along a gradient of decreasing ecosystem productivity.

Triangulating Principal Effectiveness: How Perspectives of Parents, Teachers, and Assistant Principals Identify the Central Importance of Managerial Skills. Working Paper 35

Science.gov (United States)

Grissom, Jason A.; Loeb, Susanna

2009-01-01

While the importance of effective principals is undisputed, few studies have addressed what specific skills principals need to promote school success. This study draws on unique data combining survey responses from principals, assistant principals, teachers and parents with rich administrative data to identify which principal skills matter most…

Optimising costs in WLCG operations

CERN Document Server

Pradillo, Mar; Flix, Josep; Forti, Alessandra; Sciabà, Andrea

2015-01-01

The Worldwide LHC Computing Grid project (WLCG) provides the computing and storage resources required by the LHC collaborations to store, process and analyse the 50 Petabytes of data annually generated by the LHC. The WLCG operations are coordinated by a distributed team of managers and experts and performed by people at all participating sites and from all the experiments. Several improvements in the WLCG infrastructure have been implemented during the first long LHC shutdown to prepare for the increasing needs of the experiments during Run2 and beyond. However, constraints in funding will affect not only the computing resources but also the available effort for operations. This paper presents the results of a detailed investigation on the allocation of the effort in the different areas of WLCG operations, identifies the most important sources of inefficiency and proposes viable strategies for optimising the operational cost, taking into account the current trends in the evolution of the computing infrastruc...

Technical co-operation for nuclear safety in developing countries

International Nuclear Information System (INIS)

Flakus, F.N.; Giuliani, P.

1984-01-01

The Agency's programme on technical co-operation for nuclear safety is, largely, responsive in character and the Agency's response is tailored to needs identified by developing countries. However, the Agency's assistance alone is not sufficient: technical co-operation can only be successful and is most effective when there is also a strong input from the counterpart body participating in a particular project. The commitment of national governments is fundamental to success. Technical co-operation is most fruitful if the Agency's assistance capabilities and the recipient country's co-operation capabilities match. Co-operation activities mostly take the form of single projects hosted by individual institutions within a single country; regional and inter-regional projects are also important

IAEA activity on operator support systems in nuclear power plants

International Nuclear Information System (INIS)

Dounaev, V.; Fujita, Y.; Juslin, K.; Haugset, K.; Lux, I.; Naser, J.

1994-01-01

Various operator support systems for nuclear power plants are already operational or under development in the IAEA Member States. Operator support systems are based on intelligent data processing and, in addition to plant operation, they are also becoming more important for safety. A key feature of operator support systems is their availability to restructure data to increase its relevance for a given situation. This can improve the user's ability to identify plant mode, system state, and component state and to identify and diagnose faults. Operator support systems can also assist the user in planning and implementing corrective actions to improve the nuclear power plant's availability and safety. In September 1991, the IAEA Committee for Contractual Scientific Services approved the Co-ordinated Research Programme (CRP) on ''Operator Support Systems in Nuclear Power Plants'' in the framework of the Project ''Man-Machine Interface Studies''. The main objective of this programme is to provide guidance and technology transfer for the development and implementation of operator support systems. This includes the experience with human-machine interfaces and closely related issues such as instrumentation and control, the use of computers in nuclear power plants, and operator qualification. (author)

The Importance of Attitude to Knowledge and Innovation for Performance of Manufacturing Enterprises Operating Either Locally Or Internationally

Directory of Open Access Journals (Sweden)

Marcin Soniewicki

2016-06-01

Full Text Available Today knowledge management actions and innovation processes are very specific and complex topics. That is why this publication is focused on small and narrow aspect of these issues – their perception in only one category of entities, which are manufacturing companies. This paper analyzes and compares the attitude to knowledge management and innovation amid manufacturing enterprises operating locally only or internationally. It also checks the influence of various approaches to studied issues on creating mentioned businesses’ competitive advantage. Empirical study, in which 331 companies took part, has shown that enterprises in international process appreciate knowledge management and innovation more than their counterparts operating only on the local markets. Moreover, the research results demonstrated that knowledge and innovation appreciation by managers and employees is important for competitive advantage of every kind of manufacturing enterprises. Nevertheless, it is crucial to remember for those firms involved on foreign markets – the more a company is engaged in international operations the more attention it should pay to its knowledge and innovation processes.

A Survey on Operator Monotonicity, Operator Convexity, and Operator Means

Directory of Open Access Journals (Sweden)

Pattrawut Chansangiam

2015-01-01

Full Text Available This paper is an expository devoted to an important class of real-valued functions introduced by Löwner, namely, operator monotone functions. This concept is closely related to operator convex/concave functions. Various characterizations for such functions are given from the viewpoint of differential analysis in terms of matrix of divided differences. From the viewpoint of operator inequalities, various characterizations and the relationship between operator monotonicity and operator convexity are given by Hansen and Pedersen. In the viewpoint of measure theory, operator monotone functions on the nonnegative reals admit meaningful integral representations with respect to Borel measures on the unit interval. Furthermore, Kubo-Ando theory asserts the correspondence between operator monotone functions and operator means.

Experience in Cuba in the licensing during import, commissioning and operation of an Irradiator LLCo ISOGAMMA

International Nuclear Information System (INIS)

Forteza, Yamil Lopez; Reyes, Yolanda Perez; Garcia, Jose R. Quevedo; Molina, Igor I. Sarabia; Gonzalez, Leonel Omarovich; Zubiaur, Omar Cruz

2013-01-01

This work presented the experiences during the process of licensing an irradiator ISOGAMMA LLCo model according to the recommendations of the International Atomic Energy (IAEA). Aspects of the safety assessment are detailed, as well as control and verification requirements for radiation safety and security at different stages of the process (import, transportation, installation irradiator loading 60Co sources, commissioning and operation) of irradiator recently installed in Cuba. The results of the evaluation carried a source of reference and consultation necessary for the work of the regulator to consider for similar processes that lie ahead in other facilities irradiation

Commonwealth Edison operating experience: the people factor

International Nuclear Information System (INIS)

Soth, L.

1983-01-01

Since 1955, Commonwealth Edison's nuclear commitment has evolved into three operating stations, another in startup, and two more under construction. Paralleling this evolution has been the investment in the personnel resources to operate, maintain, and manage these facilities. The personnel resource, its training and development, is the foundation for safe operation at any nuclear plant - the people factor. The personnel requirement at Edison has expanded and evolved with each station to meet ever increasing regulatory requirements. An extensive training organization has been developed to emphasize the importance of the man side of the human factors man/machine interface. Personnel errors are investigated to identify and correct the root causes, and outstanding personnel performance is recognized by the Company

The Importance of Authorized Economic Operator Institution for the Security of Supply Chain in the International Goods Turnover of Polish Enterprises

Directory of Open Access Journals (Sweden)

Miroslawa Laszuk

2016-01-01

Full Text Available Together with the growth of international exchange of goods also the number of threats increases that potentially may influence the security of functioning international supply chains. Currently, there is a need of developing solutions which aim at facilitating flow of goods, simultaneously ensuring security against the increasing number of threats related to e.g. terrorist attacks, illegal smuggling, thefts and tax frauds. The article presents institution of an authorized operator – Authorized Economic Operator (AEO, introduced on the territory of the European Union in 2008. The discourse demonstrates influence of functioning AEO certificates on security of international supply chains with the particular attention drawn on the importance of AEO institution for Polish operators.

A pupal transcriptomic screen identifies Ral as a target of store-operated calcium entry in Drosophila neurons.

Science.gov (United States)

Richhariya, Shlesha; Jayakumar, Siddharth; Abruzzi, Katharine; Rosbash, Michael; Hasan, Gaiti

2017-02-14

Transcriptional regulation by Store-operated Calcium Entry (SOCE) is well studied in non-excitable cells. However, the role of SOCE has been poorly documented in neuronal cells with more complicated calcium dynamics. Previous reports demonstrated a requirement for SOCE in neurons that regulate Drosophila flight bouts. We refine this requirement temporally to the early pupal stage and use RNA-sequencing to identify SOCE mediated gene expression changes in the developing Drosophila pupal nervous system. Down regulation of dStim, the endoplasmic reticular calcium sensor and a principal component of SOCE in the nervous system, altered the expression of 131 genes including Ral, a small GTPase. Disruption of Ral function in neurons impaired flight, whereas ectopic expression of Ral in SOCE-compromised neurons restored flight. Through live imaging of calcium transients from cultured pupal neurons, we confirmed that Ral does not participate in SOCE, but acts downstream of it. These results identify neuronal SOCE as a mechanism that regulates expression of specific genes during development of the pupal nervous system and emphasizes the relevance of SOCE-regulated gene expression to flight circuit maturation.

Identification of important nodes in directed biological networks: a network motif approach.

Directory of Open Access Journals (Sweden)

Pei Wang

Full Text Available Identification of important nodes in complex networks has attracted an increasing attention over the last decade. Various measures have been proposed to characterize the importance of nodes in complex networks, such as the degree, betweenness and PageRank. Different measures consider different aspects of complex networks. Although there are numerous results reported on undirected complex networks, few results have been reported on directed biological networks. Based on network motifs and principal component analysis (PCA, this paper aims at introducing a new measure to characterize node importance in directed biological networks. Investigations on five real-world biological networks indicate that the proposed method can robustly identify actually important nodes in different networks, such as finding command interneurons, global regulators and non-hub but evolutionary conserved actually important nodes in biological networks. Receiver Operating Characteristic (ROC curves for the five networks indicate remarkable prediction accuracy of the proposed measure. The proposed index provides an alternative complex network metric. Potential implications of the related investigations include identifying network control and regulation targets, biological networks modeling and analysis, as well as networked medicine.

Factor analysis of financial and operational performance measures of non-profit hospitals.

Science.gov (United States)

Das, Dhiman

2009-01-01

To understand the important dimensions of the financial and operational performance of non-profit hospitals. Secondary data for non-profit US hospitals between 1996 and 2004. I use iterative principal factor analysis of hospitals' financial and operational ratios for each year of the study. For factor interpretation, I use oblique rotation. Financial ratios were created using cost report data from HCRIS 2552-96 available from the Centers for Medicaid & Medicare Services (CMS). I identify five factors--capital structure, profitability, activity, liquidity, and an operational factor--that explain most of the variation in the performance of non-profit hospitals. I also find that capital structure is more important than profitability in determining the performance of these hospitals. The importance of capital structure highlights a significant shift in the organization of the non-profit hospitals' finances.

Role of cognitive models of operators in the design, operation and licensing of nuclear power plants

International Nuclear Information System (INIS)

Rasmussen, J.

1982-01-01

Cognitive models of the behavior of nuclear power plant operators - that is, models developed in terms of human properties rather than external task characteristics - are assuming increasingly important roles in plant design, operation and licensing. This is partly due to an increased concern for human decision making during unfamiliar plant conditions, and partly due to problems that arise when modern information technology is used to support operators in complex situations. Some of the problems identified during work on interface design and risk analysis are described. First, the question of categories of models is raised. Next, the use of cognitive models for system design is discussed. The use of the available cognitive models for more effective operator training is also advocated. The need for using cognitive models in risk analysis is also emphasized. Finally, the sources of human performance data, that is, event reports, incident analysis, experiments, and training simulators are mentioned, and the need for a consistent framework for data analysis based on cognitive models is discussed

Hierarchthis: An Interactive Interface for Identifying Mission-Relevant Components of the Advanced Multi-Mission Operations System

Science.gov (United States)

Litomisky, Krystof

2012-01-01

Even though NASA's space missions are many and varied, there are some tasks that are common to all of them. For example, all spacecraft need to communicate with other entities, and all spacecraft need to know where they are. These tasks use tools and services that can be inherited and reused between missions, reducing systems engineering effort and therefore reducing cost.The Advanced Multi-Mission Operations System, or AMMOS, is a collection of multimission tools and services, whose development and maintenance are funded by NASA. I created HierarchThis, a plugin designed to provide an interactive interface to help customers identify mission-relevant tools and services. HierarchThis automatically creates diagrams of the AMMOS database, and then allows users to show/hide specific details through a graphical interface. Once customers identify tools and services they want for a specific mission, HierarchThis can automatically generate a contract between the Multimission Ground Systems and Services Office, which manages AMMOS, and the customer. The document contains the selected AMMOS components, along with their capabilities and satisfied requirements. HierarchThis reduces the time needed for the process from service selections to having a mission-specific contract from the order of days to the order of minutes.

Operational human performance reliability assessment (OHPRA)

International Nuclear Information System (INIS)

Haas, P.M.; Swanson, P.J.; Connelly, E.M.

1993-01-01

Operational Human Performance Reliability Assessment (OHPRA) is an approach for assessing human performance that is being developed in response to demands from modern process industries for practical and effective tools to assess and improve human performance, and therefore overall system performance and safety. The single most distinguishing feature of the approach is that is defines human performance in open-quotes operationalclose quotes terms. OHPRA is focused not on generation of human error probabilities, but on practical analysis of human performance to aid management in (1) identifying open-quotes fixableclose quotes problems and (2) providing input on the importance and nature of potential improvements. Development of the model in progress uses a unique approach for eliciting expert strategies for assessing performance. A PC-based model incorporating this expertise is planned. A preliminary version of the approach has already been used successfully to identify practical human performance problems in reactor and chemical process plant operations

Perceived cultural importance and actual self-importance of values in cultural identification.

Science.gov (United States)

Wan, Ching; Chiu, Chi-yue; Tam, Kim-pong; Lee, Sau-lai; Lau, Ivy Yee-man; Peng, Siqing

2007-02-01

Cross-cultural psychologists assume that core cultural values define to a large extent what a culture is. Typically, core values are identified through an actual self-importance approach, in which core values are those that members of the culture as a group strongly endorse. In this article, the authors propose a perceived cultural importance approach to identifying core values, in which core values are values that members of the culture as a group generally believe to be important in the culture. In 5 studies, the authors examine the utility of the perceived cultural importance approach. Results consistently showed that, compared with values of high actual self-importance, values of high perceived cultural importance play a more important role in cultural identification. These findings have important implications for conceptualizing and measuring cultures. ((c) 2007 APA, all rights reserved).

Strategic Leadership Development: An Operation Domain Application

Science.gov (United States)

1997-03-01

effectiveness. The Stratified Systems Theory Model is used to identify skills and attributes for the three leadership domains of Direct, Operation, and...tools they need to help the organization achieve its goals. In discussing leadership , it is important to distinguish between management and leadership ...Peter Drucker and Warren Bennis, two noted authors on leadership , offered the following differentiation: “ Management is doing things right

Conceptual and Operational Considerations in Identifying Socioenvironmental Factors Associated with Disability among Community-Dwelling Adults

Directory of Open Access Journals (Sweden)

Mathieu Philibert

2015-04-01

Full Text Available Disability is conceived as a person–context interaction. Physical and social environments are identified as intervention targets for improving social participation and independence. In comparison to the body of research on place and health, relatively few reports have been published on residential environments and disability in the health sciences literature. We reviewed studies evaluating the socioenvironmental correlates of disability. Searches were conducted in Medline, Embase and CINAHL databases for peer-reviewed articles published between 1997 and 2014. We found many environmental factors to be associated with disability, particularly area-level socioeconomic status and rurality. However, diversity in conceptual and methodological approaches to such research yields a limited basis for comparing studies. Conceptual inconsistencies in operational measures of disability and conceptual disagreement between studies potentially affect understanding of socioenvironmental influences. Similarly, greater precision in socioenvironmental measures and in study designs are likely to improve inference. Consistent and generalisable support for socioenvironmental influences on disability in the general adult population is scarce.

Operational limitations of light water reactors relating to fuel performance

International Nuclear Information System (INIS)

Cheng, H.S.

1976-07-01

General aspects of fuel performance for typical Boiling and Pressurized Water Reactors are presented. Emphasis is placed on fuel failures in order to make clear important operational limitations. A discussion of fuel element designs is first given to provide the background information for the subsequent discussion of several fuel failure modes that have been identified. Fuel failure experiences through December 31, 1974, are summarized. The operational limitations that are required to mitigate the effects of fuel failures are discussed

Identifying Important Career Indicators of Undergraduate Geoscience Students Upon Completion of Their Degree

Science.gov (United States)

Wilson, C. E.; Keane, C. M.; Houlton, H. R.

2012-12-01

The American Geosciences Institute (AGI) decided to create the National Geoscience Student Exit Survey in order to identify the initial pathways into the workforce for these graduating students, as well as assess their preparedness for entering the workforce upon graduation. The creation of this survey stemmed from a combination of experiences with the AGI/AGU Survey of Doctorates and discussions at the following Science Education Research Center (SERC) workshops: "Developing Pathways to Strong Programs for the Future", "Strengthening Your Geoscience Program", and "Assessing Geoscience Programs". These events identified distinct gaps in understanding the experiences and perspectives of geoscience students during one of their most profound professional transitions. Therefore, the idea for the survey arose as a way to evaluate how the discipline is preparing and educating students, as well as identifying the students' desired career paths. The discussions at the workshops solidified the need for this survey and created the initial framework for the first pilot of the survey. The purpose of this assessment tool is to evaluate student preparedness for entering the geosciences workforce; identify student decision points for entering geosciences fields and remaining in the geosciences workforce; identify geosciences fields that students pursue in undergraduate and graduate school; collect information on students' expected career trajectories and geosciences professions; identify geosciences career sectors that are hiring new graduates; collect information about salary projections; overall effectiveness of geosciences departments regionally and nationally; demonstrate the value of geosciences degrees to future students, the institutions, and employers; and establish a benchmark to perform longitudinal studies of geosciences graduates to understand their career pathways and impacts of their educational experiences on these decisions. AGI's Student Exit Survey went through

Experimental assessment of the importance of amino acid positions identified by an entropy-based correlation analysis of multiple-sequence alignments.

Science.gov (United States)

Dietrich, Susanne; Borst, Nadine; Schlee, Sandra; Schneider, Daniel; Janda, Jan-Oliver; Sterner, Reinhard; Merkl, Rainer

2012-07-17

The analysis of a multiple-sequence alignment (MSA) with correlation methods identifies pairs of residue positions whose occupation with amino acids changes in a concerted manner. It is plausible to assume that positions that are part of many such correlation pairs are important for protein function or stability. We have used the algorithm H2r to identify positions k in the MSAs of the enzymes anthranilate phosphoribosyl transferase (AnPRT) and indole-3-glycerol phosphate synthase (IGPS) that show a high conn(k) value, i.e., a large number of significant correlations in which k is involved. The importance of the identified residues was experimentally validated by performing mutagenesis studies with sAnPRT and sIGPS from the archaeon Sulfolobus solfataricus. For sAnPRT, five H2r mutant proteins were generated by replacing nonconserved residues with alanine or the prevalent residue of the MSA. As a control, five residues with conn(k) values of zero were chosen randomly and replaced with alanine. The catalytic activities and conformational stabilities of the H2r and control mutant proteins were analyzed by steady-state enzyme kinetics and thermal unfolding studies. Compared to wild-type sAnPRT, the catalytic efficiencies (k(cat)/K(M)) were largely unaltered. In contrast, the apparent thermal unfolding temperature (T(M)(app)) was lowered in most proteins. Remarkably, the strongest observed destabilization (ΔT(M)(app) = 14 °C) was caused by the V284A exchange, which pertains to the position with the highest correlation signal [conn(k) = 11]. For sIGPS, six H2r mutant and four control proteins with alanine exchanges were generated and characterized. The k(cat)/K(M) values of four H2r mutant proteins were reduced between 13- and 120-fold, and their T(M)(app) values were decreased by up to 5 °C. For the sIGPS control proteins, the observed activity and stability decreases were much less severe. Our findings demonstrate that positions with high conn(k) values have an

48 CFR 17.604 - Identifying management and operating contracts.

Science.gov (United States)

2010-10-01

... important areas (e.g., safety, security, cost control, site conditions). (c) The conduct of the work is wholly or at least substantially separate from the contractor's other business, if any. (d) The work is...

Rendezvous, proximity operations and capture quality function deployment report

Science.gov (United States)

Lamkin, Stephen L. (Editor)

1991-01-01

Rendezvous, Proximity Operations, and Capture (RPOC) is a missions operations area which is extremely important to present and future space initiatives and must be well planned and coordinated. To support this, a study team was formed to identify a specific plan of action using the Quality Function Deployment (QFD) process. This team was composed of members from a wide spectrum of engineering and operations organizations which are involved in the RPOC technology area. The key to this study's success is an understanding of the needs of potential programmatic customers and the technology base available for system implementation. To this end, the study team conducted interviews with a variety of near term and future programmatic customers and technology development sponsors. The QFD activity led to a thorough understanding of the needs of these customers in the RPOC area, as well as the relative importance of these needs.

Rendezvous, proximity operations and capture quality function deployment report

Science.gov (United States)

Lamkin, Stephen L.

1991-12-01

Rendezvous, Proximity Operations, and Capture (RPOC) is a missions operations area which is extremely important to present and future space initiatives and must be well planned and coordinated. To support this, a study team was formed to identify a specific plan of action using the Quality Function Deployment (QFD) process. This team was composed of members from a wide spectrum of engineering and operations organizations which are involved in the RPOC technology area. The key to this study's success is an understanding of the needs of potential programmatic customers and the technology base available for system implementation. To this end, the study team conducted interviews with a variety of near term and future programmatic customers and technology development sponsors. The QFD activity led to a thorough understanding of the needs of these customers in the RPOC area, as well as the relative importance of these needs.

A bottom-up approach to identifying the maximum operational adaptive capacity of water resource systems to a changing climate

Science.gov (United States)

Culley, S.; Noble, S.; Yates, A.; Timbs, M.; Westra, S.; Maier, H. R.; Giuliani, M.; Castelletti, A.

2016-09-01

Many water resource systems have been designed assuming that the statistical characteristics of future inflows are similar to those of the historical record. This assumption is no longer valid due to large-scale changes in the global climate, potentially causing declines in water resource system performance, or even complete system failure. Upgrading system infrastructure to cope with climate change can require substantial financial outlay, so it might be preferable to optimize existing system performance when possible. This paper builds on decision scaling theory by proposing a bottom-up approach to designing optimal feedback control policies for a water system exposed to a changing climate. This approach not only describes optimal operational policies for a range of potential climatic changes but also enables an assessment of a system's upper limit of its operational adaptive capacity, beyond which upgrades to infrastructure become unavoidable. The approach is illustrated using the Lake Como system in Northern Italy—a regulated system with a complex relationship between climate and system performance. By optimizing system operation under different hydrometeorological states, it is shown that the system can continue to meet its minimum performance requirements for more than three times as many states as it can under current operations. Importantly, a single management policy, no matter how robust, cannot fully utilize existing infrastructure as effectively as an ensemble of flexible management policies that are updated as the climate changes.

Comparing the operators' behavior in conducting emergency operating procedures with the complexity of procedural steps

International Nuclear Information System (INIS)

Park, Jin Kyun; Jung, Won Dea

2003-01-01

Many kinds of procedures have been used to reduce the operators' workload throughout various industries. However, significant portion of accidents or incidents was caused by procedure related human errors that are originated from non-compliance of procedures. According to related studies, several important factors for non-compliance behavior have been identified, and one if them is the complexity of procedures. This means that comparing the change of the operators' behavior with the complexity of procedures may be meaningful for investigating plausible reasons for the operators' non-compliance behavior. In this study, emergency training records were collected using a full scope simulator in order to obtain data related to the operators' non-compliance behavior. And then, collected data are compared with the complexity of procedural steps. As the result, two remarkable relationships are found, which indicate that the operators' behavior could be reasonably characterized by the complexity of procedural steps. Thus, these relationships can be used as meaningful clues not only to scrutinize the reason of non-compliance behavior but also to suggest appropriate remedies for the reduction of non-compliance behavior that can result in procedure related human errors

EDAM: an ontology of bioinformatics operations, types of data and identifiers, topics and formats

Science.gov (United States)

Ison, Jon; Kalaš, Matúš; Jonassen, Inge; Bolser, Dan; Uludag, Mahmut; McWilliam, Hamish; Malone, James; Lopez, Rodrigo; Pettifer, Steve; Rice, Peter

2013-01-01

Motivation: Advancing the search, publication and integration of bioinformatics tools and resources demands consistent machine-understandable descriptions. A comprehensive ontology allowing such descriptions is therefore required. Results: EDAM is an ontology of bioinformatics operations (tool or workflow functions), types of data and identifiers, application domains and data formats. EDAM supports semantic annotation of diverse entities such as Web services, databases, programmatic libraries, standalone tools, interactive applications, data schemas, datasets and publications within bioinformatics. EDAM applies to organizing and finding suitable tools and data and to automating their integration into complex applications or workflows. It includes over 2200 defined concepts and has successfully been used for annotations and implementations. Availability: The latest stable version of EDAM is available in OWL format from http://edamontology.org/EDAM.owl and in OBO format from http://edamontology.org/EDAM.obo. It can be viewed online at the NCBO BioPortal and the EBI Ontology Lookup Service. For documentation and license please refer to http://edamontology.org. This article describes version 1.2 available at http://edamontology.org/EDAM_1.2.owl. Contact: jison@ebi.ac.uk PMID:23479348

A landscape ecology approach identifies important drivers of urban biodiversity.

Science.gov (United States)

Turrini, Tabea; Knop, Eva

2015-04-01

Cities are growing rapidly worldwide, yet a mechanistic understanding of the impact of urbanization on biodiversity is lacking. We assessed the impact of urbanization on arthropod diversity (species richness and evenness) and abundance in a study of six cities and nearby intensively managed agricultural areas. Within the urban ecosystem, we disentangled the relative importance of two key landscape factors affecting biodiversity, namely the amount of vegetated area and patch isolation. To do so, we a priori selected sites that independently varied in the amount of vegetated area in the surrounding landscape at the 500-m scale and patch isolation at the 100-m scale, and we hold local patch characteristics constant. As indicator groups, we used bugs, beetles, leafhoppers, and spiders. Compared to intensively managed agricultural ecosystems, urban ecosystems supported a higher abundance of most indicator groups, a higher number of bug species, and a lower evenness of bug and beetle species. Within cities, a high amount of vegetated area increased species richness and abundance of most arthropod groups, whereas evenness showed no clear pattern. Patch isolation played only a limited role in urban ecosystems, which contrasts findings from agro-ecological studies. Our results show that urban areas can harbor a similar arthropod diversity and abundance compared to intensively managed agricultural ecosystems. Further, negative consequences of urbanization on arthropod diversity can be mitigated by providing sufficient vegetated space in the urban area, while patch connectivity is less important in an urban context. This highlights the need for applying a landscape ecological approach to understand the mechanisms shaping urban biodiversity and underlines the potential of appropriate urban planning for mitigating biodiversity loss. © 2015 John Wiley & Sons Ltd.

Important Non-Technical Skills in Video-Assisted Thoracoscopic Surgery Lobectomy: Team Perspectives.

Science.gov (United States)

Gjeraa, Kirsten; Mundt, Anna S; Spanager, Lene; Hansen, Henrik J; Konge, Lars; Petersen, René H; Østergaard, Doris

2017-07-01

Safety in the operating room is dependent on the team's non-technical skills. The importance of non-technical skills appears to be different for minimally invasive surgery as compared with open surgery. The aim of this study was to identify which non-technical skills are perceived by team members to be most important for patient safety, in the setting of video-assisted thoracoscopic surgery (VATS) lobectomy. This was an explorative, semistructured interview-based study with 21 participants from all four thoracic surgery centers in Denmark that perform VATS lobectomy. Data analysis was deductive, and directed content analysis was used to code the text into the Oxford Non-Technical Skills system for evaluating operating teams' non-technical skills. The most important non-technical skills described by the VATS teams were planning and preparation, situation awareness, problem solving, leadership, risk assessment, and teamwork. These non-technical skills enabled the team to achieve shared mental models, which in turn facilitated their efforts to anticipate next steps. This was viewed as important by the participants as they saw VATS lobectomy as a high-risk procedure with complementary and overlapping scopes of practice between surgical and anesthesia subteams. This study identified six non-technical skills that serve as the foundation for shared mental models of the patient, the current situation, and team resources. These findings contribute three important additions to the shared mental model construct: planning and preparation, risk assessment, and leadership. Shared mental models are crucial for patient safety because they enable VATS teams to anticipate problems through adaptive patterns of both implicit and explicit coordination. Copyright © 2017 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Development of the job concept of a nuclear power plant operator

International Nuclear Information System (INIS)

Alpeev, A.S.; Bukrinskii, A.M.

1994-01-01

An important conclusion drawn in the aftermath of the 1979 accident at Three Mile Island 2 in the USA, in particular, in discussions, held in Stockholm in 1980 at the International Conference on Safety Problems, of the causes of this accident, was that the plant-operator concept employed at the time in western countries had to be changed. The concept presupposed that the operator's actions must be strictly limited by instructions which supposedly encompass all possible situations associated with the accidents. The principal problem facing the operator in this concept is to identify the situation in which the appropriate instruction can be selected for immediate execution. An error in identifying the situation could influence decisively the evolution of further events in the power block of the nuclear plant, and this is precisely what happened at Three Mile Island 2. For this reason, operator training was based mainly on identifying the initial events, which corresponded to a definite sequence of the further developments owing to the technical scheme and laws of thermophysical processes. Such operator training is based on an event tree which gives a graphical representation of the probable consequences of the development of events in an accident with a given initial event. It is believed that approximately 20 initial events (tree roots) form the basic collection of events, each of which has three to seven branches, i.e., an accident can evolve in several possible directions. Every branch point on each tree is identified by a definite collection of technological parameters, according to which the operator must be able to identify the situation. Under the present concept, when the situation is identified correctly, the search for the required control instruction and its execution is a secondary process

Ergonomics as aid tool to identify and to analyze factors that can affect the operational performance of nuclear power plants

International Nuclear Information System (INIS)

Luquetti Santos, I.J.A.; Carvalho, P.V.R.

2005-01-01

The study of ergonomics has evolved around the world as one of the keys to understand human behavior in interaction with complex systems as nuclear power plant and to achieve the best match between the system and its users in the context of task to be performed. Increasing research efforts have yielded a considerable body of knowledge concerning the design of workstations, workplace, control rooms, human-system interfaces, user-interface interaction and organizational design to prevent worker discomfort, illness and also to improve productivity, product quality, ease of use and safety. The work ergonomics analysis consists of gathering a series of observation in order to better understand the work done and to propose changes and improvements in the working conditions. The work ergonomics analysis implies both the correction of existing situations (safety, reliability and production problems) and the development of new work system. Operator activity analysis provides a useful tool for the ergonomics approach, based on work ergonomics analysis. The operators will be systematically observed in their real work environment (control room) or in simulators. The focus is on description of the distributed regulated mechanisms (in the sense that operators work in crew), both in nominal and degraded situations, observing how operators regulate collectively their work during an increase in workload or when confronted with situations where incidents or accidents occur. Audio, video recorders and field notes can be used to collect empirical data, conversations and interactions that occur naturally within the work environment. Our research develops an applied ergonomics methodology, based on field studies, that permits to identify and analyze situations, factors that may affect the operational performance of nuclear power plants. Our contribution is related to the following technical topic: How best to learn from and share operational safety experience and manage changes during

JOYO operation support system 'JOYCAT' based on intelligent alarm handling

International Nuclear Information System (INIS)

Tamaoki, Tetsuo; Yamamoto, Hiroki; Sato, Masuo; Yoshida, Megumu; Kaneko, Tomoko; Terunuma, Seiichi; Takatsuto, Hiroshi; Morimoto, Makoto.

1992-01-01

An operation support system for the experimental fast reactor 'JOYO' was developed based on an intelligent alarm-handling. A specific feature of this system, called JOYCAT (JOYO Consulting and Analyzing Tool), is in its sequential processing structure that a uniform treatment by using design knowledge base is firstly applied for all activated alarms, and an exceptional treatment by using heuristic knowledge base is then applied only for the former results. This enables us to achieve real-time and flexible alarm-handling. The first alarm-handling determines the candidates of causal alarms, important alarms with which the operator should firstly cope, through identifying the cause-consequence relations among alarms based on the design knowledge base in which importance and activating conditions are described for each of 640 alarms in a frame format. The second alarm-handling makes the final judgement with the candidates by using the heuristic knowledge base described as production rules. Then, operation manuals concerning the most important alarms are displayed to operators. JOYCAT has been in commission since September of 1990, after a wide scope of validation tests by using an on-site full-scope training simulator. (author)

The DESCARTES-Nantes survey of kidney transplant recipients displaying clinical operational tolerance identifies 35 new tolerant patients and 34 almost tolerant patients.

Science.gov (United States)

Massart, Annick; Pallier, Annaïck; Pascual, Julio; Viklicky, Ondrej; Budde, Klemens; Spasovski, Goce; Klinger, Marian; Sever, Mehmet Sukru; Sørensen, Søren Schwartz; Hadaya, Karine; Oberbauer, Rainer; Dudley, Christopher; De Fijter, Johan W; Yussim, Alexander; Hazzan, Marc; Wekerle, Thomas; Berglund, David; De Biase, Consuelo; Pérez-Sáez, María José; Mühlfeld, Anja; Orlando, Giuseppe; Clemente, Katia; Lai, Quirino; Pisani, Francesco; Kandus, Aljosa; Baas, Marije; Bemelman, Frederike; Ponikvar, Jadranka Buturovic; Mazouz, Hakim; Stratta, Piero; Subra, Jean-François; Villemain, Florence; Hoitsma, Andries; Braun, Laura; Cantarell, Maria Carmen; Colak, Hulya; Courtney, Aisling; Frasca, Giovanni Maria; Howse, Matthew; Naesens, Maarten; Reischig, Tomas; Serón, Daniel; Seyahi, Nurhan; Tugmen, Cem; Alonso Hernandez, Angel; Beňa, Luboslav; Biancone, Luigi; Cuna, Vania; Díaz-Corte, Carmen; Dufay, Alexandre; Gaasbeek, André; Garnier, Arnaud; Gatault, Philippe; Gentil Govantes, Miguel Angel; Glowacki, François; Gross, Oliver; Hurault de Ligny, Bruno; Huynh-Do, Uyen; Janbon, Bénédicte; Jiménez Del Cerro, Luis Antonio; Keller, Frieder; La Manna, Gaetano; Lauzurica, Ricardo; Le Monies De Sagazan, Hervé; Thaiss, Friedrich; Legendre, Christophe; Martin, Séverine; Moal, Marie-Christine; Noël, Christian; Pillebout, Evangeline; Piredda, Gian Benedetto; Puga, Ana Ramírez; Sulowicz, Wladyslaw; Tuglular, Serhan; Prokopova, Michaela; Chesneau, Mélanie; Le Moine, Alain; Guérif, Pierrick; Soulillou, Jean-Paul; Abramowicz, Marc; Giral, Magali; Racapé, Judith; Maggiore, Umberto; Brouard, Sophie; Abramowicz, Daniel

2016-06-01

Kidney recipients maintaining a prolonged allograft survival in the absence of immunosuppressive drugs and without evidence of rejection are supposed to be exceptional. The ERA-EDTA-DESCARTES working group together with Nantes University launched a European-wide survey to identify new patients, describe them and estimate their frequency for the first time. Seventeen coordinators distributed a questionnaire in 256 transplant centres and 28 countries in order to report as many 'operationally tolerant' patients (TOL; defined as having a serum creatinine <1.7 mg/dL and proteinuria <1 g/day or g/g creatinine despite at least 1 year without any immunosuppressive drug) and 'almost tolerant' patients (minimally immunosuppressed patients (MIS) receiving low-dose steroids) as possible. We reported their number and the total number of kidney transplants performed at each centre to calculate their frequency. One hundred and forty-seven questionnaires were returned and we identified 66 TOL (61 with complete data) and 34 MIS patients. Of the 61 TOL patients, 26 were previously described by the Nantes group and 35 new patients are presented here. Most of them were noncompliant patients. At data collection, 31/35 patients were alive and 22/31 still operationally tolerant. For the remaining 9/31, 2 were restarted on immunosuppressive drugs and 7 had rising creatinine of whom 3 resumed dialysis. Considering all patients, 10-year death-censored graft survival post-immunosuppression weaning reached 85% in TOL patients and 100% in MIS patients. With 218 913 kidney recipients surveyed, cumulative incidences of operational tolerance and almost tolerance were estimated at 3 and 1.5 per 10 000 kidney recipients, respectively. In kidney transplantation, operational tolerance and almost tolerance are infrequent findings associated with excellent long-term death-censored graft survival. © The Author 2016. Published by Oxford University Press on behalf of ERA-EDTA. All rights reserved.

Method for identifying process reuse opportunities to enhance the operating model

CSIR Research Space (South Africa)

De Vries, M

2011-12-01

Full Text Available the volatility of strategy and suggests the use of an operating model (OM), which is a commitment to a way of doing business. The OM creates a company-wide vision for process standardization and data centralization and guides decisions about how a company...

NEW TRENDS AND CHELLENGES IN AUTOMOTIVE INDUSTRY LOGISTICS OPERATIONS

Directory of Open Access Journals (Sweden)

Dušan Sabadka

2015-03-01

Full Text Available This paper lays out the main features of the global automotive industry and identifies several important trends. Logistics operations (inbound and outbound in the automotive supply chain are complex and account for large expenses and therefore are segments in the value chainwhere improvements can be made. Better coordination between inbound and outbound logistics contributes to optimising the supply chains, to reducing inventories and to responding to consumer requests. As economies grow, the competition shifts towards brand image and customisation and here the speed and reliability of logistics operations becomes a critical elements.

Expert operator preferences in remote manipulator control systems

International Nuclear Information System (INIS)

Sundstrom, E.; Draper, J.V.; Fausz, A.; Woods, H.

1995-06-01

This report describes a survey of expert remote manipulator operators designed to identify features of control systems related to operator efficiency and comfort. It provides information for designing the control center for the Single-Shell Tank Waste Retrieval Manipulator System (TWRMS) Test Bed, described in a separate report. Research questions concerned preferred modes of control, optimum work sessions, sources of operator fatigue, importance of control system design features, and desired changes in control rooms. Participants comprised four expert remote manipulator operators at Oak Ridge National Laboratory, who individually have from 9 to 20 years of experience using teleoperators. The operators had all used rate and position control, and all preferred bilateral (force-reflecting) position control. They reported spending an average of 2.75 h in control of a teleoperator system during a typical shift. All were accustomed to working in a crew of two and alternating control and support roles in 2-h rotations in an 8-h shift. Operators reported that fatigue in using remote manipulator systems came mainly from watching TV monitors and making repetitive motions. Three of four experienced symptoms, including headaches and sore eyes, wrists, and back. Of 17 features of control rooms rated on importance, highest ratings went to comfort and support provided by the operator chair, location of controls, location of video monitors, video image clarity, types of controls, and control modes. When asked what they wanted to change, operators said work stations designed for comfort; simpler, lighter hand-controls; separate controls for each camera; better placement of remote camera; color monitors; and control room layouts that support crew interaction. Results of this small survey reinforced the importance of ergonomic factors in remote manipulation

Importance of loss-of-benefits considerations in nuclear regulatory decision-making

International Nuclear Information System (INIS)

Buehring, W.A.; Peerenboom, J.P.

1982-01-01

This paper identifies and discusses some of the important consequences of nuclear power plant unavailability, and quantifies a number of technical measures of loss of benefits that may help the Nuclear Regulatory Commission make decisions involving nuclear power plant licensing and operation. The loss-of-benefits analysis presented here is based on the results of a series of case studies developed by Argonne National Laboratory in cooperation with four electric utilities on hypothetical nuclear plant shutdowns

A Study on the Operator Decision Support for Feed-and-Bleed Operation

International Nuclear Information System (INIS)

Kim, Bo Gyung; Kim, Sang Ho; Kang, Hyun Gook; Yoon, Ho Joon

2014-01-01

In the case of a combined accident that includes a failure of the secondary cooling system, it is difficult for operators to recognize the necessity of an feed and bleed (F and B) operation because a lot of parameters and alarms should be checked before a decision, and operators may spend a considerable amount of time arriving at the entry for a proper emergency operating procedure that contains the procedure for an F and B operation. Therefore, a clear identification of the success boundary of an F and B operation would help operators in their decision-making when a combined accident that includes a secondary cooling system failure occurs. This study will provide a useful guideline for the initiation of an F and B operation for operators. Cooling the RCS after a scram is one of the most important safety functions for preventing core damage. To support the operator in decision making whether to initiate the F and B operation, plant conditions requiring the initiation of an F and B operation were identified. Plant conditions are affected by the steam generator inventory, RCS inventory, core inventory, and safety injection availability. The combination of accident types, component availabilities, and the initiation time of an F and B operation affect the success of the F and B operation. Operators need clear information about the RCS condition when the steam generators, the RCS's main residual heat removal mechanism, become unavailable. When this happens, the initiation of an F and B operation becomes necessary. As the number of the state increases, the necessity of an F and B operation increases. Especially, the operator should initiate an F and B operation when the RCS condition enters State 3 for Type 1 incidents or State 3-2 for Type 2 incidents. The results of this study may be useful in providing information regarding the necessity and effects of an F and B operation in a quantitative manner. In particular, in the case of a combined accident including a

Operating experience insights supporting ageing assessments

International Nuclear Information System (INIS)

Nitoi, M.

2013-01-01

Be effective in ageing management means looking at the right aspects, with the right techniques, and one of the most effective tool which could be used for that purpose is the analysis of operating experience. The paper has as objective to perform a review of available operating experience, with the aim to provide a better picture about the impact of ageing effects. The IAEA International Reporting System and NRC Licensee Event Reports were chosen as reference databases, both databases being internationally recognized as important sources of information about events occurrences in the nuclear power plants. The ageing related events identified in the selected time window were analyzed in detail, and the contributions of each major degradation mechanisms that have induced the ageing related events (specific to each defined group of components) was represented and discussed. The paper demonstrates the possibility to use operating experience insights in highlighting the ageing effects. (authors)

Spatial Operations

Directory of Open Access Journals (Sweden)

Anda VELICANU

2010-09-01

Full Text Available This paper contains a brief description of the most important operations that can be performed on spatial data such as spatial queries, create, update, insert, delete operations, conversions, operations on the map or analysis on grid cells. Each operation has a graphical example and some of them have code examples in Oracle and PostgreSQL.

Fractional power operation of tokamak reactors

International Nuclear Information System (INIS)

Mau, T.K.; Vold, E.L.; Conn, R.W.

1986-01-01

Methods to operate a tokamak fusion reactor at fractions of its rated power, identify the more effective control knobs and assess the impact of the requirements of fractional power operation on full power reactor design are explored. In particular, the role of burn control in maintaining the plasma at thermal equilibrium throughout these operations is studied. As a prerequisite to this task, the critical physics issues relevant to reactor performance predictions are examined and some insight into their impact on fractional power operation is offered. The basic tool of analysis consists of a zero-dimensional (0-D) time-dependent plasma power balance code which incorporates the most advanced data base and models in transport and burn plasma physics relevant to tokamaks. Because the plasma power balance is dominated by the transport loss and given the large uncertainty in the confinement model, the authors have studied the problem for a wide range of energy confinement scalings. The results of this analysis form the basis for studying the temporal behavior of the plasma under various thermal control mechanisms. Scenarios of thermally stable full and fractional power operations have been determined for a variety of transport models, with either passive or active feedback burn control. Important power control parameters, such as gas fueling rate, auxiliary power and other plasma quantities that affect transport losses, have also been identified. The results of these studies vary with the individual transport scaling used and, in particular, with respect to the effect of alpha heating power on confinement

How important is importance for prospective memory? A review

Directory of Open Access Journals (Sweden)

Stefan eWalter

2014-06-01

Full Text Available Forgetting to carry out an intention as planned can have serious consequences in everyday life. People sometimes even forget intentions that they consider as very important. Here, we review the literature on the impact of importance on prospective memory performance. We highlight different methods used to manipulate the importance of a prospective memory task such as providing rewards, importance relative to other ongoing activities, absolute importance, and providing social motives. Moreover, we address the relationship between importance and other factors known to affect prospective memory and ongoing task performance such as type of prospective memory task (time-, event- or activity-based, cognitive loads, and cue focality. Finally, we provide a connection to motivation, we summarize the effects of task importance and we identify important venues for future research.

How important is importance for prospective memory? A review

Science.gov (United States)

Walter, Stefan; Meier, Beat

2014-01-01

Forgetting to carry out an intention as planned can have serious consequences in everyday life. People sometimes even forget intentions that they consider as very important. Here, we review the literature on the impact of importance on prospective memory performance. We highlight different methods used to manipulate the importance of a prospective memory task such as providing rewards, importance relative to other ongoing activities, absolute importance, and providing social motives. Moreover, we address the relationship between importance and other factors known to affect prospective memory and ongoing task performance such as type of prospective memory task (time-, event-, or activity-based), cognitive loads, and processing overlaps. Finally, we provide a connection to motivation, we summarize the effects of task importance and we identify important venues for future research. PMID:25018743

Using the apparent diffusion coefficient to identifying MGMT promoter methylation status early in glioblastoma: importance of analytical method

Energy Technology Data Exchange (ETDEWEB)

Rundle-Thiele, Dayle [Centre for Clinical Research, University of Queensland, Brisbane, Queensland (Australia); Day, Bryan; Stringer, Brett [Brain Cancer Research Unit, Queensland Institute of Medical Research, Brisbane, Queensland (Australia); Fay, Michael [Department of Radiation Oncology, Royal Brisbane and Women' s Hospital, Brisbane, Queensland (Australia); Martin, Jennifer [Discipline of Clinical Pharmacology, School of Medicine and Public Health, University of Newcastle, Newcastle, New South Wales (Australia); Jeffree, Rosalind L [Department of Neurosurgery, Royal Brisbane and Women' s Hospital, Brisbane, Queensland (Australia); Thomas, Paul [Queensland PET Service, Royal Brisbane and Women' s Hospital, Brisbane, Queensland (Australia); Bell, Christopher [Centre for Clinical Research, University of Queensland, Brisbane, Queensland (Australia); Salvado, Olivier [CSIRO Digital Productivity Flagship, CSIRO, Herston, Queensland (Australia); Gal, Yaniv [Centre for Medical Diagnostic Technologies in Queensland, University of Queensland, Brisbane, Queensland (Australia); Coulthard, Alan [Discipline of Medical Imaging, University of Queensland, St Lucia, Queensland (Australia); Department of Medical Imaging, Royal Brisbane and Women' s Hospital, Brisbane, Queensland (Australia); Crozier, Stuart [Centre for Medical Diagnostic Technologies in Queensland, University of Queensland, Brisbane, Queensland (Australia); Rose, Stephen, E-mail: stephen.rose@csiro.au [CSIRO Digital Productivity Flagship, CSIRO, Herston, Queensland (Australia); Centre for Clinical Research, University of Queensland, Brisbane, Queensland (Australia)

2015-06-15

Accurate knowledge of O{sup 6}-methylguanine methyltransferase (MGMT) gene promoter subtype in patients with glioblastoma (GBM) is important for treatment. However, this test is not always available. Pre-operative diffusion MRI (dMRI) can be used to probe tumour biology using the apparent diffusion coefficient (ADC); however, its ability to act as a surrogate to predict MGMT status has shown mixed results. We investigated whether this was due to variations in the method used to analyse ADC. We undertook a retrospective study of 32 patients with GBM who had MGMT status measured. Matching pre-operative MRI data were used to calculate the ADC within contrast enhancing regions of tumour. The relationship between ADC and MGMT was examined using two published ADC methods. A strong trend between a measure of ‘minimum ADC’ and methylation status was seen. An elevated minimum ADC was more likely in the methylated compared to the unmethylated MGMT group (U = 56, P = 0.0561). In contrast, utilising a two-mixture model histogram approach, a significant reduction in mean measure of the ‘low ADC’ component within the histogram was associated with an MGMT promoter methylation subtype (P < 0.0246). This study shows that within the same patient cohort, the method selected to analyse ADC measures has a significant bearing on the use of that metric as a surrogate marker of MGMT status. Thus for dMRI data to be clinically useful, consistent methods of data analysis need to be established prior to establishing any relationship with genetic or epigenetic profiling.

Using the apparent diffusion coefficient to identifying MGMT promoter methylation status early in glioblastoma: importance of analytical method

International Nuclear Information System (INIS)

Rundle-Thiele, Dayle; Day, Bryan; Stringer, Brett; Fay, Michael; Martin, Jennifer; Jeffree, Rosalind L; Thomas, Paul; Bell, Christopher; Salvado, Olivier; Gal, Yaniv; Coulthard, Alan; Crozier, Stuart; Rose, Stephen

2015-01-01

Accurate knowledge of O 6 -methylguanine methyltransferase (MGMT) gene promoter subtype in patients with glioblastoma (GBM) is important for treatment. However, this test is not always available. Pre-operative diffusion MRI (dMRI) can be used to probe tumour biology using the apparent diffusion coefficient (ADC); however, its ability to act as a surrogate to predict MGMT status has shown mixed results. We investigated whether this was due to variations in the method used to analyse ADC. We undertook a retrospective study of 32 patients with GBM who had MGMT status measured. Matching pre-operative MRI data were used to calculate the ADC within contrast enhancing regions of tumour. The relationship between ADC and MGMT was examined using two published ADC methods. A strong trend between a measure of ‘minimum ADC’ and methylation status was seen. An elevated minimum ADC was more likely in the methylated compared to the unmethylated MGMT group (U = 56, P = 0.0561). In contrast, utilising a two-mixture model histogram approach, a significant reduction in mean measure of the ‘low ADC’ component within the histogram was associated with an MGMT promoter methylation subtype (P < 0.0246). This study shows that within the same patient cohort, the method selected to analyse ADC measures has a significant bearing on the use of that metric as a surrogate marker of MGMT status. Thus for dMRI data to be clinically useful, consistent methods of data analysis need to be established prior to establishing any relationship with genetic or epigenetic profiling

Further characteristics important in the operation of ceramic BeO TLD

International Nuclear Information System (INIS)

Gammage, R.B.

1977-01-01

There is now a considerable volume of published research dealing with ceramic BeO--TLD (Crase and Gammage, 1975; Yamashita et al., 1974; Scarpa et al., 1971). Its high sensitivity to radiation (1 mR), cheapness, commercial availability, non-toxicity, chemical stability, an atomic number of near tissue equivalence, and resistance to thermal fading, suggest that it should, by now, have found widespread acceptance as a TLD phosphor. It has not. There are only a small handful of reports dealing with the practical application of this type of dosimeter (Puite et al., 1974; Gammage and Haywood, 1976; Gesell et al., 1975). It seems wise, therefore, to look at the phosphor more closely and to focus on characteristics likely to cause problems under real operating conditions, especially those which are acting as a deterrent to its widespread acceptance. Operational characteristics were studied and the results are discussed

Best Practices in the Management of an Operating Experience Programme at Nuclear Power Plants

International Nuclear Information System (INIS)

2010-08-01

The IAEA Fundamental Safety Principles (IAEA Safety Standards Series No. SF-1) state the need for operating organizations to establish a programme for the feedback and analysis of operating experience in nuclear power plants. Such a programme ensures that operating experience is analysed, events important to safety are reviewed in depth, lessons learned are disseminated to the staff of the organization and to the relevant national and international organizations and corrective actions are effectively implemented. In IAEA Operational Safety Review Team (OSART) and Peer Review of the effectiveness of the Operational Safety Performance Experience Review (PROSPER) missions, weaknesses in the management of operating experience (OE) programmes have been identified as one of the root causes of the recurrence of events. This publication has been developed to provide advice and assistance to nuclear installation managers and related institutions, including contractors and support organizations, to strengthen and enhance the management of their OE processes. In this publication, a number of barriers to the successful management of an OE programme have been identified. Managers are encouraged to review and evaluate these barriers with a view to identifying and eliminating them within their own organizations

Consideration on HRA implementation during LPSD operation

International Nuclear Information System (INIS)

Kim, Ar Ryum; Kim, Jae Whan; Jang, In Seok; Seong, Poong Hyun

2014-01-01

During low power and shutdown operation, it has been pointed out that the important of human actions is significantly increased. Because automatic control may be disabled, most control room annunciation titles indicate alarm status, and procedures are insufficient, human operators plays a much larger role during outages and in lower power state. In this regards, in order to reduce human errors and secure nuclear power plant safety, it is necessary to identify and estimate human errors during LPSD operations. However, many researchers have argued that there is no comprehensive LPSD human reliability analysis (HRA) method so far. In this study, we reviewed and implemented the existing HRA methods during LPSD operations: Korean standard HRA (K-HRA), Simplified plant analysis risk HRA (SPAR-H), Caused based decision tree (CBDT), and human cognitive reliability/ operator reliability experiments (HCR/ORE). We reviewed HRA methods based on several reports related to the unique aspects of human operator during LPSD operation and HRA requirements. In addition, the existing HRA methods were implemented during various plant operating states (POS) of LPSD operation. Loss of shutdown cooling system (SCS) was selected as initiating event. As a result of review and implementation of HRA methods, we derived the some limitations of the existing HRA methods and related procedure during loss of SCS event

An Estimation of Operator's Diagnostic Time for Feed-And-Bleed Operation under Various Scenarios

Energy Technology Data Exchange (ETDEWEB)

Kim, Bo Gyung; Kang, Hyun Gook [KAIST, Daejeon (Korea, Republic of); Yoon, Ho Joon [Khalifa University of Science, Abu Dhabi (United Arab Emirates)

2015-10-15

In order to assess realistic safety of plant, effects of interactions between components, operator, and plant condition are needed to be considered in the PSA model. One of the important issues to estimate the CDF is the estimation of human error probability (HEP). When an accident occurs, operators follow the emergency operating procedure and check various alarm, parameters, and signals. In the conventional Korean PSA model, the Korean standard HRA (K-HRA) method is used. In this method, the HEP is the sum of diagnosis error probability and execution error probability. A diagnosis error probability is expressed by the available time for diagnosis and adjusting performance shaping factors, and an execution error probability is a function of task type and stress level. Available time for diagnosis is very important factor of HEP. If the available time for diagnosis is short, the HEP becomes high. In order to obtain the realistic risk assessment results, we first focus on the estimation of HEP considering the plant dynamics under various scenarios. Target operation and scenarios are feed-and bleed operation (F and B operation) and total loss of feedwater (TLOFW) accident with/without loss of coolant accident (LOCA). One of the highest HEP is HEP of FnB operation. In additional, Scenarios, which are related to combination secondary heat removal failure and primary heat removal failure, are most critical core damage scenario of the combined accident except scenarios related to station black out (SBO). In these scenarios, the FnB operation is last resort to prevent core damage. To estimate available operator diagnosis time, we identify the relationship between accidents, mitigation function, and plant condition. Distribution of available time of diagnosis was estimated using the MOSAIQUE. The variables are break size, break timing, trip timing of RCP, and availability of high pressure safety injection (HPSI) pump under the TLOFW accident with LOCA. For Type 1 accident

Problemi dei contingenti all'importazione (The problem with import quotas

Directory of Open Access Journals (Sweden)

V. BARATTIERI

2014-03-01

Full Text Available Today trade policy and the politics of protectionism in Italy, for the most part carried out within the EEC, essentially rely on the Community system of customs duties on imported products and variable taxes on agricultural imports. However, there is also a set of domestic trade policy instruments, among which the system of quantitative import restrictions. The present article analyzes the economic, legal and practical aspects of the complex problem of the allocation of import licenses between national operators. In the first part the authors summarize the main differences between quotas and customs duties. The formulas adopted to date in Italy are then re-examined and the criteria used by the other CEE countries are referred to. Finally, the objectives identified as priorities in the field of Public Administration are specified, the main shortcomings of the current system highlighted and some changes proposed.  JEL: F13, F15

Identifying lubricant options for compressor bearing designs

Science.gov (United States)

Karnaz, J.; Seeton, C.; Dixon, L.

2017-08-01

Today’s refrigeration and air conditioning market is not only driven by the environmental aspects of the refrigerants, but also by the energy efficiency and reliability of system operation. Numerous types of compressor designs are used in refrigeration and air conditioning applications which means that different bearings are used; and in some cases, multiple bearing types within a single compressor. Since only one lubricant is used, it is important to try to optimize the lubricant to meet the various demands and requirements for operation. This optimization entails investigating different types of lubricant chemistries, viscosities, and various formulation options. What makes evaluating these options more challenging is the refrigerant which changes the properties of the lubricant delivered to the bearing. Once the lubricant and refrigerant interaction are understood, through various test methods, then work can start on collaborating with compressor engineers on identifying the lubricant chemistry and formulation options. These interaction properties are important to the design engineer to make decisions on the adequacy of the lubricant before compressor tests are started. This paper will discuss the process to evaluate lubricants for various types of compressors and bearing design with focus on what’s needed for current refrigerant trends. In addition, the paper will show how the lubricant chemistry choice can be manipulated through understanding of the bearing design and knowledge of interaction with the refrigerant to maximize performance. Emphasis will be placed on evaluation of synthetic lubricants for both natural and synthetic low GWP refrigerants.

Importance of satisfaction and guests experience in hotel business organizations

Directory of Open Access Journals (Sweden)

Milošević Srđan

2012-01-01

Full Text Available Hotel companies which operate in today's competitive environment must constantly work on improving their products and services, at the request of their guests. Customer satisfaction is the key to retaining existing and attracting new guests. To achieve this goal, managers in the hotel organizations have become aware of the fact that the quality of staying in hotel represent unique experience for tourists. Lot of papers are dealing with the exploration of this topic, it only proves its importance nowadays. However, insufficient attention is paid to the simultaneous study of experience of guests and their satisfaction through the offered models (indexes that are created for this purpose. The purpose of this paper is to show the importance of these issues and identify their potential symbiosis.

Identifying a "default" visual search mode with operant conditioning.

Science.gov (United States)

Kawahara, Jun-ichiro

2010-09-01

The presence of a singleton in a task-irrelevant domain can impair visual search. This impairment, known as the attentional capture depends on the set of participants. When narrowly searching for a specific feature (the feature search mode), only matching stimuli capture attention. When searching broadly (the singleton detection mode), any oddball captures attention. The present study examined which strategy represents the "default" mode using an operant conditioning approach in which participants were trained, in the absence of explicit instructions, to search for a target in an ambiguous context in which one of two modes was available. The results revealed that participants behaviorally adopted the singleton detection as the default mode but reported using the feature search mode. Conscious strategies did not eliminate capture. These results challenge the view that a conscious set always modulates capture, suggesting that the visual system tends to rely on stimulus salience to deploy attention.

Thematic tourism as an important segment in the business of modern tour operators

Directory of Open Access Journals (Sweden)

Đurašević Silvana

2014-01-01

Full Text Available The aim of this paper is to point out to a growing trend of interests of modern tourists for various forms of thematic tourism, as a response to the tendency of uniformity of consumers' lifestyle, which globalization has brought. Thanks to their central place in the tourism system and their expertise, tour operators play a key role in the creation of new programs, 'tailored' to the taste of modern tourists. For that purpose, a number of theoretical assumptions and examples from practice have been analyzed and the method of understanding cause-and-effect relationships is used, in order to examine the role of tour operators in application of new thematic programs. The need to emphasize the special customers' requirements regarding travel services creates an additional problem to tour operators. It indicates the trend of individual trips, which requires a change in choice of markets and product differentiation. The research findings suggest the conclusion that tour operators need to adapt their business strategies to new market conditions, using advantages of information technology in designing diverse thematic programs, which will enable tourists to perceive other local values and express their individuality looking for authentic experiences.

Identifying Important Atlantic Areas for the conservation of Balearic shearwaters: Spatial overlap with conservation areas

Science.gov (United States)

Pérez-Roda, Amparo; Delord, Karine; Boué, Amélie; Arcos, José Manuel; García, David; Micol, Thierry; Weimerskirch, Henri; Pinaud, David; Louzao, Maite

2017-07-01

Marine protected areas (MPAs) are considered one of the main tools in both fisheries and conservation management to protect threatened species and their habitats around the globe. However, MPAs are underrepresented in marine environments compared to terrestrial environments. Within this context, we studied the Atlantic non-breeding distribution of the southern population of Balearic shearwaters (Puffinus mauretanicus) breeding in Eivissa during the 2011-2012 period based on global location sensing (GLS) devices. Our objectives were (1) to identify overall Important Atlantic Areas (IAAs) from a southern population, (2) to describe spatio-temporal patterns of oceanographic habitat use, and (3) to assess whether existing conservation areas (Natura 2000 sites and marine Important Bird Areas (IBAs)) cover the main IAAs of Balearic shearwaters. Our results highlighted that the Atlantic staging (from June to October in 2011) dynamic of the southern population was driven by individual segregation at both spatial and temporal scales. Individuals ranged in the North-East Atlantic over four main IAAs (Bay of Biscay: BoB, Western Iberian shelf: WIS, Gulf of Cadiz: GoC, West of Morocco: WoM). While most individuals spent more time on the WIS or in the GoC, a small number of birds visited IAAs at the extremes of their Atlantic distribution range (i.e., BoB and WoM). The chronology of the arrivals to the IAAs showed a latitudinal gradient with northern areas reached earlier during the Atlantic staging. The IAAs coincided with the most productive areas (higher chlorophyll a values) in the NE Atlantic between July and October. The spatial overlap between IAAs and conservation areas was higher for Natura 2000 sites than marine IBAs (areas with and without legal protection, respectively). Concerning the use of these areas, a slightly higher proportion of estimated positions fell within marine IBAs compared to designated Natura 2000 sites, with Spanish and Portuguese conservation

Buying Imported Products Online : A quantitative study about Chinese Online consumer behavior towards imported products

OpenAIRE

Chen, Qianqian; Wang, Yuren

2015-01-01

With the fast growing Chinese online marketplace and the increasing popularity of shopping imported products online in China, more and more practitioners and researchers are interested in understanding the cues that Chinese consumers use to evaluate imported products consumption online. Our quantitative study aims to identify what factors affect the behavior of Chinese online consumers towards imported products and the relationships between the identified factors and purchase intention, and t...

Antimicrobial activity of fluoride and its in vivo importance: identification of research questions.

Science.gov (United States)

Van Loveren, C

2001-01-01

This manuscript discusses the antimicrobial activity of fluoride and its in vivo importance in order to identify research questions. There is a lot of information on mechanisms by which fluoride may interfere with bacterial metabolism and dental plaque acidogenicity. The antimicrobial activity of fluoride products is enhanced when fluoride is associated with antimicrobial cations like Sn(2+) and amine. It is not clear whether the antimicrobial mechanisms of fluoride are operating in vivo or even to what extent antimicrobial activity can contribute to caries prevention. This latter question may be the most important one in research. Copyright 2001 S. Karger AG, Basel.

THE BEHAVIORAL PROFILE OF HARVESTER OPERATORS

Directory of Open Access Journals (Sweden)

Millana Burger Pagnussat

Full Text Available ABSTRACT This study aims to characterize the behavioral profile of harvester operators, with the goal of assisting forest managers in selecting and training new teams of employees. A forest company located in central-western Brazil was examined from a sample of 20 harvester operators that did not have experience carrying out the functions of their industry. A behavioral profile evaluation tool was used, consisting of a management system that creates a profile based on behavioral competencies; it was initially used to develop a profile of a high-performing harvester operator; or rather, a reference profile. Next, the behavioral profile of the operators were grouped into distinct classes and compared with the reference profile to identify traits that could positively or negatively affect an operators' performance. An optimal profile had the following qualities: attentive to details, meets deadlines and follows rules, technically-oriented, patient with repetitive tasks, the ability to avoid conflicts, and being an introvert. An improper profile included aspects such as aggressiveness, being argumentative, being persuasive, explosive, and tense at work. The behavioral profile evaluation tool can support the process of choosing forest machine operators; however, it is important to also consider skills and work experience.

The importance of production standard operating procedure in a family business company

Science.gov (United States)

Hongdiyanto, C.

2017-12-01

Plastic industry is a growing sector, therefore UD X which engage in this business has a great potential to grow as well. The problem faced by this family business company is that no standard operating procedure is used and it lead to problem in the quality and quantity produced. This research is aim to create a production standard operating procedure for UD X. Semistructure interview is used to gather information from respondent to help writer create the SOP. There are four SOP’s created, namely: classifying SOP, sorting SOP, milling SOP and packing SOP. Having SOP will improve the effectiveness of production because employees already know how to work in each stages of production process.

Universal operations in Hochschild homology

DEFF Research Database (Denmark)

Wahl, Nathalie

2016-01-01

operations is approximated by a certain chain complex of formal operations, for which we provide an explicit model that we can calculate in a number of cases. When E encodes the structure of open topological conformal field theories, we identify this last chain complex, up quasi-isomorphism, with the moduli...... space of Riemann surfaces with boundaries, thus establishing that the operations constructed by Costello and Kontsevich-Soibelman via different methods identify with all formal operations. When E encodes open topological quantum field theories (or symmetric Frobenius algebras) our chain complex...... topology operations, which had so far been elusive....

Assessing urban potential flooding risk and identifying effective risk-reduction measures.

Science.gov (United States)

Cherqui, Frédéric; Belmeziti, Ali; Granger, Damien; Sourdril, Antoine; Le Gauffre, Pascal

2015-05-01

Flood protection is one of the traditional functions of any drainage system, and it remains a major issue in many cities because of economic and health impact. Heavy rain flooding has been well studied and existing simulation software can be used to predict and improve level of protection. However, simulating minor flooding remains highly complex, due to the numerous possible causes related to operational deficiencies or negligent behaviour. According to the literature, causes of blockages vary widely from one case to another: it is impossible to provide utility managers with effective recommendations on how to improve the level of protection. It is therefore vital to analyse each context in order to define an appropriate strategy. Here we propose a method to represent and assess the flooding risk, using GIS and data gathered during operation and maintenance. Our method also identifies potential management responses. The approach proposed aims to provide decision makers with clear and comprehensible information. Our method has been successfully applied to the Urban Community of Bordeaux (France) on 4895 interventions related to flooding recorded during the 2009-2011 period. Results have shown the relative importance of different issues, such as human behaviour (grease, etc.) or operational deficiencies (roots, etc.), and lead to identify corrective and proactive. This study also confirms that blockages are not always directly due to the network itself and its deterioration. Many causes depend on environmental and operating conditions on the network and often require collaboration between municipal departments in charge of roads, green spaces, etc. Copyright © 2015 Elsevier B.V. All rights reserved.

An Indicator Based Assessment Methodology Proposal for the Identification of Domestic Systemically Important Banks within the Turkish Banking Sector

OpenAIRE

Ozge ULKUTAS SACCI; Guven SAYILGAN

2014-01-01

This study aims to identify domestic systemically important banks (D-SIB) operating within the Turkish Banking Sector. In this regard, adopting an indicator based assessment methodology together with the cluster analysis application, banks in the sample are classified in terms of their degree of systemic importance by using publicly available year-end data of 2012. The study has shown that a total of 7 banks with the highest systemic importance clustered away from the remaining 21 banks in th...

Sternal wound complications after primary isolated myocardial revascularization: the importance of the post-operative variables.

NARCIS (Netherlands)

Noyez, L.; Druten, J.A.M. van; Mulder, J.; Schroen, A.M.; Skotnicki, S.H.; Brouwer, R.

2001-01-01

OBJECTIVE: Select pre-, peri-, and post-operative variables, predictive for sternal wound complications (SWC), in a clinical setting. METHODS: We analyzed pre-, peri-, and post-operative data of 3815 patients who underwent a primary isolated bypass grafting. 100 patients (2.6%) had post-operative

Thoughts on identifiers

CERN Multimedia

CERN. Geneva

2005-01-01

As business processes and information transactions have become an inextricably intertwined with the Web, the importance of assignment, registration, discovery, and maintenance of identifiers has increased. In spite of this, integrated frameworks for managing identifiers have been slow to emerge. Instead, identification systems arise (quite naturally) from immediate business needs without consideration for how they fit into larger information architectures. In addition, many legacy identifier systems further complicate the landscape, making it difficult for content managers to select and deploy identifier systems that meet both the business case and long term information management objectives. This presentation will outline a model for evaluating identifier applications and the functional requirements of the systems necessary to support them. The model is based on a layered analysis of the characteristics of identifier systems, including: * Functional characteristics * Technology * Policy * Business * Social T...

Identifying Variability in Mental Models Within and Between Disciplines Caring for the Cardiac Surgical Patient.

Science.gov (United States)

Brown, Evans K H; Harder, Kathleen A; Apostolidou, Ioanna; Wahr, Joyce A; Shook, Douglas C; Farivar, R Saeid; Perry, Tjorvi E; Konia, Mojca R

2017-07-01

The cardiac operating room is a complex environment requiring efficient and effective communication between multiple disciplines. The objectives of this study were to identify and rank critical time points during the perioperative care of cardiac surgical patients, and to assess variability in responses, as a correlate of a shared mental model, regarding the importance of these time points between and within disciplines. Using Delphi technique methodology, panelists from 3 institutions were tasked with developing a list of critical time points, which were subsequently assigned to pause point (PP) categories. Panelists then rated these PPs on a 100-point visual analog scale. Descriptive statistics were expressed as percentages, medians, and interquartile ranges (IQRs). We defined low response variability between panelists as an IQR ≤ 20, moderate response variability as an IQR > 20 and ≤ 40, and high response variability as an IQR > 40. Panelists identified a total of 12 PPs. The PPs identified by the highest number of panelists were (1) before surgical incision, (2) before aortic cannulation, (3) before cardiopulmonary bypass (CPB) initiation, (4) before CPB separation, and (5) at time of transfer of care from operating room (OR) to intensive care unit (ICU) staff. There was low variability among panelists' ratings of the PP "before surgical incision," moderate response variability for the PPs "before separation from CPB," "before transfer from OR table to bed," and "at time of transfer of care from OR to ICU staff," and high response variability for the remaining 8 PPs. In addition, the perceived importance of each of these PPs varies between disciplines and between institutions. Cardiac surgical providers recognize distinct critical time points during cardiac surgery. However, there is a high degree of variability within and between disciplines as to the importance of these times, suggesting an absence of a shared mental model among disciplines caring for

Operations Research and the US (United States) Army

Science.gov (United States)

1983-04-07

technology "developed more rapidly than it could be absorbed effectively into military tactics and strategy." 4 World War II is usually identified as...Corporation, was formed by the Air Force as a non-profit organization to provide technological advice. 7 By the early 1950’s the public recognized operations... enlight - ening. He recognized the important and clearly distinguishable roles played by the technical analyst and the military decision maker. The systems

Importance of crevices formed between tubes and tube plate for the operational behaviour of heat exchangers

International Nuclear Information System (INIS)

Achten, N.; Herbsleb, G.; Wieling, N.

1986-01-01

It must be guaranteed by construction and manufacture of heat exchangers that primary and secondary medium are completely separated from each other. When this requirement is fullfilled, the operational use of heat exchangers can be impaired by corrosion reactions within the crevice formed between tube and tube plate which may result in corrosion damage. The various techniques which are in use to connect tubes and tube plate and which are described in the present report, must be valued with respect to the tightness of the connection as well as to the formation of crevices between tubes and tube plate. Corrosion resistant copperbase alloys and stainless steels are the most important materials which are in use for the construction of heat exchangers. The mechanisms of crevice corrosion with unalloyed and low alloy carbon steels, stainless steels, and mixed connections between tube and tube plate with these materials are described in detail. Crevice corrosion may be caused also by the formation of galvanic cells between materials of differing electrochemical response. Furthermore, the concentration of aggressive media in crevices between tubes and tube plate can lead to corrosion damage of heat exchanger tubes. For the service operation of heat exchangers without any hazard of corrosion damage in crevices between tubes and tube plate, such crevices must be avoided by proper construction and manufacture. As a model for suitable measures to avoid crevices, the manufacture of steam generators for PWR's is described. (orig.) [de

A Framework for Operational Due Diligence in Mergers and Acquisitions

DEFF Research Database (Denmark)

Porsgaard, Chris Berg; Haubjerg, Mathias; Herbert-Hansen, Zaza Nadja Lee

The number of mergers and acquisitions (M&As) has over the last five years increased greatly (Institute of Mergers, Acquisitions and Alliances, 2016). Furthermore, private equity professionals point to operational performance gains to drive an acquisition decision and attribute cost reductions...... as the most important lever for value creation, after a private equity firm acquires a company (PwC, 2016). However, the overall success rate of M&A activity remains low and the approach to understand an acquisition target’s operating model remains non-exhaustive and unstandardized. This paper investigates...... the pivotal eterminants for assessing operational performance and identifying improvement potentials in an acquisition target. The research question is: “What are the fundamental operational determinants influencing the acquisition decision for private equity firms in the due diligence phase?” This paper...

Estimation of minimum sample size for identification of the most important features: a case study providing a qualitative B2B sales data set

Directory of Open Access Journals (Sweden)

Marko Bohanec

2017-01-01

Full Text Available An important task in machine learning is to reduce data set dimensionality, which in turn contributes to reducing computational load and data collection costs, while improving human understanding and interpretation of models. We introduce an operational guideline for determining the minimum number of instances sufficient to identify correct ranks of features with the highest impact. We conduct tests based on qualitative B2B sales forecasting data. The results show that a relatively small instance subset is sufficient for identifying the most important features when rank is not important.

Quality assurance: Importance of systems and standard operating procedures.

Science.gov (United States)

Manghani, Kishu

2011-01-01

It is mandatory for sponsors of clinical trials and contract research organizations alike to establish, manage and monitor their quality control and quality assurance systems and their integral standard operating procedures and other quality documents to provide high-quality products and services to fully satisfy customer needs and expectations. Quality control and quality assurance systems together constitute the key quality systems. Quality control and quality assurance are parts of quality management. Quality control is focused on fulfilling quality requirements, whereas quality assurance is focused on providing confidence that quality requirements are fulfilled. The quality systems must be commensurate with the Company business objectives and business model. Top management commitment and its active involvement are critical in order to ensure at all times the adequacy, suitability, effectiveness and efficiency of the quality systems. Effective and efficient quality systems can promote timely registration of drugs by eliminating waste and the need for rework with overall financial and social benefits to the Company.

Quality assurance: Importance of systems and standard operating procedures

Directory of Open Access Journals (Sweden)

Kishu Manghani

2011-01-01

Full Text Available It is mandatory for sponsors of clinical trials and contract research organizations alike to establish, manage and monitor their quality control and quality assurance systems and their integral standard operating procedures and other quality documents to provide high-quality products and services to fully satisfy customer needs and expectations. Quality control and quality assurance systems together constitute the key quality systems. Quality control and quality assurance are parts of quality management. Quality control is focused on fulfilling quality requirements, whereas quality assurance is focused on providing confidence that quality requirements are fulfilled. The quality systems must be commensurate with the Company business objectives and business model. Top management commitment and its active involvement are critical in order to ensure at all times the adequacy, suitability, effectiveness and efficiency of the quality systems. Effective and efficient quality systems can promote timely registration of drugs by eliminating waste and the need for rework with overall financial and social benefits to the Company.

Finding The Most Important Actor in Online Crowd by Social Network Analysis

Science.gov (United States)

Yuliana, I.; Santosa, P. I.; Setiawan, N. A.; Sukirman

2017-02-01

Billion of people create trillions of connections through social media every single day. The increasing use of social media has led to dramatic changes in the of way science, government, healthcare, entertainment and enterprise operate. Large-scale participation in Technology-Mediated Social Participation (TMSP) system has opened up incredible new opportunities to deploy online crowd. This descriptive-correlational research used social network analysis (SNA) on data gathered from Fanpage Facebook of Greenpeace Indonesia related to important critical issues, the bushfires in 2015. SNA identifies relations on each member by sociometrics parameter such as three centrality (degree, closeness and betweenesse) for measuring and finding the most important actor in the online community. This paper use Fruchterman Rein-gold algorithm to visualize the online community in a graph, while Clauset-Newman-Moore is a technique to identify groups in community. As the result found 3735 vertices related to actors, 6927 edges as relation, 14 main actors in size order and 22 groups in Greenpeace Indonesia online community. This research contributes to organize some information for Greenpeace Indonesia managing their potency in online community to identify human behaviour.

Compton Operator in Quantum Electrodynamics

International Nuclear Information System (INIS)

Garcia, Hector Luna; Garcia, Luz Maria

2015-01-01

In the frame in the quantum electrodynamics exist four basic operators; the electron self-energy, vacuum polarization, vertex correction, and the Compton operator. The first three operators are very important by its relation with renormalized and Ward identity. However, the Compton operator has equal importance, but without divergence, and little attention has been given it. We have calculated the Compton operator and obtained the closed expression for it in the frame of dimensionally continuous integration and hypergeometric functions

The economic and social significance of RCA regional co-operative projects

International Nuclear Information System (INIS)

Fowler, E.E.

1979-01-01

The regional Co-operative Agreement for Research, Development and Training Related to Nuclear Science and Technology (RCA) is an established and valuable instrument between the International Atomic Energy Agency (IAEA) and Member States in South Asia, Southeast Asia and the Pacific or Far East for assisting in the transfer of modern technology to areas having economic and social importance to the region. The purpose of this review is to identify on-going or planned work which is designed to help achieve this goal. Currently approved RCA Regional Co-operative Research Projects are listed

NEW TRENDS AND CHELLENGES IN AUTOMOTIVE INDUSTRY LOGISTICS OPERATIONS

OpenAIRE

Dušan Sabadka

2015-01-01

This paper lays out the main features of the global automotive industry and identifies several important trends. Logistics operations (inbound and outbound) in the automotive supply chain are complex and account for large expenses and therefore are segments in the value chainwhere improvements can be made. Better coordination between inbound and outbound logistics contributes to optimising the supply chains, to reducing inventories and to responding to consumer requests. As econom...

Operational Forces soldiers’ perceptions of attributes and skills for career success

Directory of Open Access Journals (Sweden)

Ishreen Rawoot

2017-07-01

Full Text Available Orientation: A career within the South African Operational Forces is physically, mentally and emotionally challenging. It is a diverse working environment with its own organisational culture and unique challenges. Research purpose: The aim of the study was to explore the perceptions of Operational Forces soldiers regarding the unique requirements that facilitated their career success. Motivation for the study: A low percentage of candidates successfully complete the Operational Forces training. The financial implications of training candidates make it important to be able to identify candidates who have the potential to be successful, early on in the process. Research design, approach and method: Data were collected through a self-administered qualitative survey (n = 98. All participants were permanent Operational Forces soldiers with varying ranks and years of experience. The data were thematically analysed in order to identify themes and specific attributes and skills associated with a successful career in the Operational Forces. Main findings: A number of themes emerged from the data, each of which contributed to our understanding of the research question. The themes included self-concept, personality, interests, cognitive and physical factors. Practical and managerial implications: The research findings may help to inform decisions about approaches, practices and methodologies of the South African Operational Forces recruitment and selection process. Results also provide military organisations with the key characteristics to consider when identifying candidates with the highest potential for successful careers. Contribution and value-add: The study extends previous career success research by contributing an additional base of information regarding career success and factors that are perceived to influence it.

Energy management in mobile devices with the cinder operating system

KAUST Repository

Roy, Arjun

2011-01-01

We argue that controlling energy allocation is an increasingly useful and important feature for operating systems, especially on mobile devices. We present two new low-level abstractions in the Cinder operating system, reserves and taps, which store and distribute energy for application use. We identify three key properties of control - isolation, delegation, and subdivision - and show how using these abstractions can achieve them. We also show how the architecture of the HiStar information-flow control kernel lends itself well to energy control. We prototype and evaluate Cinder on a popular smartphone, the Android G1. Copyright © 2011 ACM.

Combining Methods to Describe Important Marine Habitats for Top Predators: Application to Identify Biological Hotspots in Tropical Waters.

Science.gov (United States)

Thiers, Laurie; Louzao, Maite; Ridoux, Vincent; Le Corre, Matthieu; Jaquemet, Sébastien; Weimerskirch, Henri

2014-01-01

In tropical waters resources are usually scarce and patchy, and predatory species generally show specific adaptations for foraging. Tropical seabirds often forage in association with sub-surface predators that create feeding opportunities by bringing prey close to the surface, and the birds often aggregate in large multispecific flocks. Here we hypothesize that frigatebirds, a tropical seabird adapted to foraging with low energetic costs, could be a good predictor of the distribution of their associated predatory species, including other seabirds (e.g. boobies, terns) and subsurface predators (e.g., dolphins, tunas). To test this hypothesis, we compared distribution patterns of marine predators in the Mozambique Channel based on a long-term dataset of both vessel- and aerial surveys, as well as tracking data of frigatebirds. By developing species distribution models (SDMs), we identified key marine areas for tropical predators in relation to contemporaneous oceanographic features to investigate multi-species spatial overlap areas and identify predator hotspots in the Mozambique Channel. SDMs reasonably matched observed patterns and both static (e.g. bathymetry) and dynamic (e.g. Chlorophyll a concentration and sea surface temperature) factors were important explaining predator distribution patterns. We found that the distribution of frigatebirds included the distributions of the associated species. The central part of the channel appeared to be the best habitat for the four groups of species considered in this study (frigatebirds, brown terns, boobies and sub-surface predators).

Combining Methods to Describe Important Marine Habitats for Top Predators: Application to Identify Biological Hotspots in Tropical Waters.

Directory of Open Access Journals (Sweden)

Laurie Thiers

Full Text Available In tropical waters resources are usually scarce and patchy, and predatory species generally show specific adaptations for foraging. Tropical seabirds often forage in association with sub-surface predators that create feeding opportunities by bringing prey close to the surface, and the birds often aggregate in large multispecific flocks. Here we hypothesize that frigatebirds, a tropical seabird adapted to foraging with low energetic costs, could be a good predictor of the distribution of their associated predatory species, including other seabirds (e.g. boobies, terns and subsurface predators (e.g., dolphins, tunas. To test this hypothesis, we compared distribution patterns of marine predators in the Mozambique Channel based on a long-term dataset of both vessel- and aerial surveys, as well as tracking data of frigatebirds. By developing species distribution models (SDMs, we identified key marine areas for tropical predators in relation to contemporaneous oceanographic features to investigate multi-species spatial overlap areas and identify predator hotspots in the Mozambique Channel. SDMs reasonably matched observed patterns and both static (e.g. bathymetry and dynamic (e.g. Chlorophyll a concentration and sea surface temperature factors were important explaining predator distribution patterns. We found that the distribution of frigatebirds included the distributions of the associated species. The central part of the channel appeared to be the best habitat for the four groups of species considered in this study (frigatebirds, brown terns, boobies and sub-surface predators.

Non-technical skills of the operating theatre scrub nurse: literature review.

Science.gov (United States)

Mitchell, Lucy; Flin, Rhona

2008-07-01

This paper is a report of a review to identify the non-technical (cognitive and social) skills used by scrub nurses. Recognition that failures in non-technical skills contributed to accidents in high-risk industries led to the development of research programmes to study the role of cognition and social interactions in operational safety. Recently, psychological research in operating theatres has revealed the importance of non-technical skills in safe and efficient performance. Most of the studies to date have focused on anaesthetists and surgeons. On-line sources and university library catalogues, publications of the Association for Perioperative Practice, National Association of Theatre Nurses and Association of Peri-Operative Registered Nurses were searched in 2007. Studies were included in the review if they presented data from scrub nurses on one or more of their non-technical skills. These findings were examined in relation to an existing medical non-technical skills framework with categories of communication, teamwork, leadership, situation awareness and decision-making. Of 424 publications retrieved, 13 were reviewed in detail. Ten concerned communication and eight of those also had data on teamwork. In 11 papers teamwork was examined, and one focused on nurses' situation awareness, teamwork and communication. None of the papers we reviewed examined leadership or decision-making by scrub nurses. Further work is needed to identify formally the non-technical skills which are important to the role of scrub nurse and then to design training in the identified non-technical skills during the education and development of scrub nurses.

BWR and PWR chemistry operating experience and perspectives

International Nuclear Information System (INIS)

Fruzzetti, K.; Garcia, S.; Lynch, N.; Reid, R.

2014-01-01

It is well recognized that proper control of water chemistry plays a critical role in ensuring the safe and reliable operation of Boiling Water Reactors (BWRs) and Pressurized Water Reactors (PWRs). State-of-the-art water chemistry programs reduce general and localized corrosion of reactor coolant system, steam cycle equipment, and fuel cladding materials; ensure continued integrity of cycle components; and reduce radiation fields. Once a particular nuclear plant component has been installed or plant system constructed, proper water chemistry provides a global tool to mitigate materials degradation problems, thereby reducing the need for costly repairs or replacements. Recognizing the importance of proper chemistry control and the value in understanding the relationship between chemistry guidance and actual operating experience, EPRI continues to collect, monitor, and evaluate operating data from BWRs and PWRs around the world. More than 900 cycles of valuable BWR and PWR operating chemistry data has been collected, including online, startup and shutdown chemistry data over more than 10 years (> 20 years for BWRs). This paper will provide an overview of current trends in BWR and PWR chemistry, focusing on plants in the U.S.. Important chemistry parameters will be highlighted and discussed in the context of the EPRI Water Chemistry Guidelines requirements (i.e., those parameters considered to be of key importance as related to the major goals identified in the EPRI Guidelines: materials integrity; fuel integrity; and minimizing plant radiation fields). Perspectives will be provided in light of recent industry initiatives and changes in the EPRI BWR and PWR Water Chemistry Guidelines. (author)

Applied Operations Research: Operator's Assistant

Science.gov (United States)

Cole, Stuart K.

2015-01-01

NASA operates high value critical equipment (HVCE) that requires trouble shooting, periodic maintenance and continued monitoring by Operations staff. The complexity HVCE and information required to maintain and trouble shoot HVCE to assure continued mission success as paper is voluminous. Training on new HVCE is commensurate with the need for equipment maintenance. LaRC Research Directorate has undertaken a proactive research to support Operations staff by initiation of the development and prototyping an electronic computer based portable maintenance aid (Operator's Assistant). This research established a goal with multiple objectives and a working prototype was developed. The research identified affordable solutions; constraints; demonstrated use of commercial off the shelf software; use of the US Coast Guard maintenance solution; NASA Procedure Representation Language; and the identification of computer system strategies; where these demonstrations and capabilities support the Operator, and maintenance. The results revealed validation against measures of effectiveness and overall proved a substantial training and capability sustainment tool. The research indicated that the OA could be deployed operationally at the LaRC Compressor Station with an expectation of satisfactorily results and to obtain additional lessons learned prior to deployment at other LaRC Research Directorate Facilities. The research revealed projected cost and time savings.

Operator entanglement of two-qubit joint unitary operations revisited: Schmidt number approach

Energy Technology Data Exchange (ETDEWEB)

Xia, Hui-Zhi; Li, Chao; Yang, Qing; Yang, Ming, E-mail: mingyang@ahu.edu.cn [Key Laboratory of Opto-electronic Information Acquisition and Manipulation, Ministry of Education, School of Physics and Material Science, Anhui University Hefei (China); Cao, Zhuo-Liang [School of Electronic Information Engineering, Hefei Normal University (China)

2012-08-15

The operator entanglement of two-qubit joint unitary operations is revisited. The Schmidt number, an important attribute of a two-qubit unitary operation, may have connection with the entanglement measure of the unitary operator. We find that the entanglement measure of a two-qubit unitary operators is classified by the Schmidt number of the unitary operators. We also discuss the exact relation between the operator entanglement and the parameters of the unitary operator. (author)

Operative Start Time Does Not Affect Post-Operative Infection Risk.

Science.gov (United States)

Guidry, Christopher A; Davies, Stephen W; Willis, Rhett N; Dietch, Zachary C; Shah, Puja M; Sawyer, Robert G

2016-10-01

Surgical care is delivered 24 h a day at most institutions. Alarmingly, some authors have found that certain operative start times are associated with greater morbidity and mortality rates. This effect has been noted in both the public and private sector. Although some of these differences may be related to process, they may also be caused by the human circadian rhythm and corresponding changes in host defenses. We hypothesized that the time of day of an operation would impact the frequency of certain post-operative outcomes significantly. Cases at a single tertiary-care center reported to the American College of Surgeons National Surgical Quality Improvement Program over a 10-year period were identified. Operative start times were divided into six-hour blocks, with 6 am to noon serving as the reference. Standard univariable techniques were applied. Multivariable logistic regression with mixed effects modeling then was used to determine the relation between operative start times and infectious outcomes, controlling for surgeon clustering. Statistical significance was set at p operative infectious complication. Seventy percent of these infections (n = 1,506) were surgical site infections. On univariable analysis considering all cases, nighttime and evening operations had higher rates of post-operative infections than those in performed during the day (9.1% from 6 am to noon; 9.7% from noon to 6 pm; 14.8% from 6 pm to midnight; and 14.4% from midnight to 6 am; p operative start time was not associated with the risk of post-operative infection, even when emergency cases were considered independently. Our data suggest that operative start times have no correlation with post-operative infectious complications. Further work is required to identify the source of the time-dependent outcome variability observed in previous studies.

Management of nuclear power plants for safe operation

International Nuclear Information System (INIS)

Kueffer, K.

1980-01-01

This lecture covers management aspects which have an immediate bearing on safety and identifies the objectives and tasks of management which are required for safe operation of a nuclear power plant and is based on the Codes of Practice and Safety Guides of the IAEA as well as arrangements in use at the Swiss Nuclear Power Station Beznau. This lecture - discusses the factors to be considered in structuring the operating organization, the support to be provided to plant management, the services and facilities needed and the management system for assuring the safety tasks are performed - describes the responsibilities of plant management and operating organization - outlines the requirements for recruitment, training and retraining as well as qualification and authorization of personnel - describes the programmes for maintenance, testing, examination, inspection, radiological protection, quality assurance, waste management, fuel management, emergency arrangement and security - describes the development of plant operating procedures including procedures to protect the personnel - outlines the requirements for initial and subsequent operation - describes the importance for evaluation and feedback of operating experience - describes the procedures for changes in hardware, procedures and set points - outlines the information flow and the requirements in reference to records and reports. (orig./RW)

The importance of the impact of political risk factors in South Africa

Directory of Open Access Journals (Sweden)

Rudolf Essel

2013-04-01

Full Text Available Political risk factors often impact negatively on the financial results of an enterprise, industry, geographical region or an entire country. In severe cases they may even lead to financial disasters. Previous research (by Essel identified 10 specific political risk factors which are common to emerging market economies. As South Africa is a developing country with an emerging market economy, these 10 political risk factors should also be present in this country. This paper focuses on the importance of the impact of political risk factors on an agent’s total annual claims amount when underwriting political risk insurance in South Africa. The objective of this research paper embodies the improvement of financial decision-making by a particular enterprise, industry, geographical region or country operating in an emerging market economy, pertaining to the importance of the impact of political risk factors. A literature study as well as an empirical survey was done to achieve the study’s objective. The conclusions of this research should also be valuable to other enterprises, industries, geographical regions or countries which operate in an emerging market economy.

Identifying blood biomarkers and physiological processes that distinguish humans with superior performance under psychological stress.

Directory of Open Access Journals (Sweden)

Amanda M Cooksey

2009-12-01

Full Text Available Attrition of students from aviation training is a serious financial and operational concern for the U.S. Navy. Each late stage navy aviator training failure costs the taxpayer over $1,000,000 and ultimately results in decreased operational readiness of the fleet. Currently, potential aviators are selected based on the Aviation Selection Test Battery (ASTB, which is a series of multiple-choice tests that evaluate basic and aviation-related knowledge and ability. However, the ASTB does not evaluate a person's response to stress. This is important because operating sophisticated aircraft demands exceptional performance and causes high psychological stress. Some people are more resistant to this type of stress, and consequently better able to cope with the demands of naval aviation, than others.Although many psychological studies have examined psychological stress resistance none have taken advantage of the human genome sequence. Here we use high-throughput -omic biology methods and a novel statistical data normalization method to identify plasma proteins associated with human performance under psychological stress. We identified proteins involved in four basic physiological processes: innate immunity, cardiac function, coagulation and plasma lipid physiology.The proteins identified here further elucidate the physiological response to psychological stress and suggest a hypothesis that stress-susceptible pilots may be more prone to shock. This work also provides potential biomarkers for screening humans for capability of superior performance under stress.

Computer aided operation of complex systems

International Nuclear Information System (INIS)

Goodstein, L.P.

1985-09-01

Advanced technology is having the effect that industrial systems are becoming more highly automated and do not rely on human intervention for the control of normally planned and/or predicted situations. Thus the importance of the operator has shifted from being a manual controller to becoming more of a systems manager and supervisory controller. At the same time, the use of advanced information technology in the control room and its potential impact on human-machine capabilities places additional demands on the designer. This report deals with work carried out to describe the plant-operator relationship in order to systematize the design and evaluation of suitable information systems in the control room. This design process starts with the control requirements from the plant and transforms them into corresponding sets of decision-making tasks with appropriate allocation of responsibilities between computer and operator. To further effectivize this cooperation, appropriate information display and accession are identified. The conceptual work has been supported by experimental studies on a small-scale simulator. (author)

A F o cus on Far Eastern Tourists – Tour Operator Selection Criteria

Directory of Open Access Journals (Sweden)

Ayşe Çelik

2014-03-01

Full Text Available Tour operators are becoming more important in the long haul destination market. Identifying tour operator selection criteria is crucial to orientate marketing strategies. The aim of the study was to determine the tour operation selection criteria of a package holiday maker visiting Turkey from the Far East according to the nationality. Data was drawn up and analyzed from tourists who came from three of these countries namely: Japan, South Korea, and China between February and April 2013 in Cappadocia. Quantitative methodology employing One-way ANOVA analysis was used. Deduction was made by analysing the tour operator selection criteria data that nationality was not a meaningful differentiation for a tourist in their assessment of the “Service Quality’” and “Opportunity to interact with other people’” items referred to in the survey questionnaire. Other items from the resulting data gave meaningful differences in cross - cultural behaviour. Results from the study provide important cues for tour operator managers to consider developing different promotional strategy initiatives to engage and attract more Japanese, South Korean, and Chinese tourists to Turkey.

Kvanefjeld refinery pilot plant operations

International Nuclear Information System (INIS)

Krebs, Damien; Furfaro, Domenic

2016-01-01

Greenland Minerals and Energy is a junior project development company which is listed on the Australian Stock Exchange (asx:GGG). It is developing the Kvanefjeld rare earth and uranium project located in the southern tip of Greenland. The project has completed a Feasibility Study and is currently in the permitting phase. Last year was a busy time for the company as it completed a Feasibility Study, a mining licence application (draft submitted in December 2015) and pilot plant operations. Beneficiation pilot plant operations were completed at GTK in Finland in April 2015. This pilot plant treated approximately 30 tonnes of ore to producing almost 2 tonnes of rare earth mineral concentrate. Later in the year a hydrometallurgical pilot plant was performed which mimicked the Refinery process. This pilot plant was performed at Outotec’s Pori Research laboratories in Finland from September till October 2015. The pilot plant treated approximately 200 kilograms of concentrate over 4 split operating campaigns. Each campaign was performed to focus on the performance of a specific part of the refinery flowsheet. This allowed for full operating focus on a single unit operation to ensure that it was operating correctly. The pilot plant operations were quite successful with no major issues with the flowsheet identified through continuous operation. Some fine tuning of conditions was required to ensure adequate removal of impurities was performed with recycle streams incorporated. Overall the leach extractions observed in the pilot plant exceeded the design assumptions in the Feasibility Study. These programs were partially funded by the EURARE program. The EURARE program aims to encourage the sustainable development of European based rare earth projects. This has the goal of allowing Europe to become less reliant on importation of these key raw materials. The professionalism and performance of both GTK and Outotec contributed significantly to the success of the pilot plant

Partitioned key-value store with atomic memory operations

Energy Technology Data Exchange (ETDEWEB)

Bent, John M.; Faibish, Sorin; Grider, Gary

2017-02-07

A partitioned key-value store is provided that supports atomic memory operations. A server performs a memory operation in a partitioned key-value store by receiving a request from an application for at least one atomic memory operation, the atomic memory operation comprising a memory address identifier; and, in response to the atomic memory operation, performing one or more of (i) reading a client-side memory location identified by the memory address identifier and storing one or more key-value pairs from the client-side memory location in a local key-value store of the server; and (ii) obtaining one or more key-value pairs from the local key-value store of the server and writing the obtained one or more key-value pairs into the client-side memory location identified by the memory address identifier. The server can perform functions obtained from a client-side memory location and return a result to the client using one or more of the atomic memory operations.

Learning from experience: development of a cognitive task-list to assess the second stage of labour for operative delivery.

Science.gov (United States)

Hodges, Ryan; Simpson, Andrea; Gurau, David; Secter, Michael; Mocarski, Eva; Pittini, Richard; Snelgrove, John; Windrim, Rory; Higgins, Mary

2015-04-01

Ensuring the availability of operative vaginal delivery is one strategy for reducing the rising Caesarean section rate. However, current training programs appear inadequate. We sought to systematically identify the core steps in assessing women in the second stage of labour for safe operative delivery, and to produce an expert task-list to assist residents and obstetricians in deciding on the safest mode of delivery for their patients. Labour and delivery nursing staff of three large university-associated hospitals identified clinicians they considered to be skilled in operative vaginal deliveries. Obstetricians who were identified consistently were invited to participate in the study. Participants were filmed performing their normal assessment of the second stage of labour on a model. Two clinicians reviewed all videos and documented all verbal and non-verbal components of the assessment; these components were grouped into overarching themes and combined into an integrated expert task-list. The task-list was then circulated to all participants for additional comments, checked against SOGC guidelines, and redrafted, allowing production of a final expert task-list. Thirty clinicians were identified by this process and 20 agreed to participate. Themes identified were assessment of suitability, focused history, physical examination including importance of an abdominal examination, strategies to accurately assess fetal position, station, and the likelihood of success, cautionary signs to prompt reassessment in the operating room, and warning signs to abandon operative delivery for Caesarean section. Communication strategies were emphasized. Having expert clinicians teach assessment in the second stage of labour is an important step in the education of residents and junior obstetricians to improve confidence in managing the second stage of labour.

Real-Time Detection of Important Sounds with a Wearable Vibration Based Device for Hearing-Impaired People

Directory of Open Access Journals (Sweden)

Mete Yağanoğlu

2018-04-01

Full Text Available Hearing-impaired people do not hear indoor and outdoor environment sounds, which are important for them both at home and outside. By means of a wearable device that we have developed, a hearing-impaired person will be informed of important sounds through vibrations, thereby understanding what kind of sound it is. Our system, which operates in real time, can achieve a success rate of 98% when estimating a door bell ringing sound, 99% success identifying an alarm sound, 99% success identifying a phone ringing, 91% success identifying honking, 93% success identifying brake sounds, 96% success identifying dog sounds, 97% success identifying human voice, and 96% success identifying other sounds using the audio fingerprint method. Audio fingerprint is a brief summary of an audio file, perceptively summarizing a piece of audio content. In this study, our wearable device is tested 100 times a day for 100 days on five deaf persons and 50 persons with normal hearing whose ears were covered by earphones that provided wind sounds. This study aims to improve the quality of life of deaf persons, and provide them a more prosperous life. In the questionnaire performed, deaf people rate the clarity of the system at 90%, usefulness at 97%, and the likelihood of using this device again at 100%.

Operating System Security

CERN Document Server

Jaeger, Trent

2008-01-01

Operating systems provide the fundamental mechanisms for securing computer processing. Since the 1960s, operating systems designers have explored how to build "secure" operating systems - operating systems whose mechanisms protect the system against a motivated adversary. Recently, the importance of ensuring such security has become a mainstream issue for all operating systems. In this book, we examine past research that outlines the requirements for a secure operating system and research that implements example systems that aim for such requirements. For system designs that aimed to

Genome-wide association study identified copy number variants important for appendicular lean mass.

Science.gov (United States)

Ran, Shu; Liu, Yong-Jun; Zhang, Lei; Pei, Yufang; Yang, Tie-Lin; Hai, Rong; Han, Ying-Ying; Lin, Yong; Tian, Qing; Deng, Hong-Wen

2014-01-01

Skeletal muscle is a major component of the human body. Age-related loss of muscle mass and function contributes to some public health problems such as sarcopenia and osteoporosis. Skeletal muscle, mainly composed of appendicular lean mass (ALM), is a heritable trait. Copy number variation (CNV) is a common type of human genome variant which may play an important role in the etiology of many human diseases. In this study, we performed genome-wide association analyses of CNV for ALM in 2,286 Caucasian subjects. We then replicated the major findings in 1,627 Chinese subjects. Two CNVs, CNV1191 and CNV2580, were detected to be associated with ALM (p = 2.26×10(-2) and 3.34×10(-3), respectively). In the Chinese replication sample, the two CNVs achieved p-values of 3.26×10(-2) and 0.107, respectively. CNV1191 covers a gene, GTPase of the immunity-associated protein family (GIMAP1), which is important for skeletal muscle cell survival/death in humans. CNV2580 is located in the Serine hydrolase-like protein (SERHL) gene, which plays an important role in normal peroxisome function and skeletal muscle growth in response to mechanical stimuli. In summary, our study suggested two novel CNVs and the related genes that may contribute to variation in ALM.

Genome-wide association study identified copy number variants important for appendicular lean mass.

Directory of Open Access Journals (Sweden)

Shu Ran

Full Text Available Skeletal muscle is a major component of the human body. Age-related loss of muscle mass and function contributes to some public health problems such as sarcopenia and osteoporosis. Skeletal muscle, mainly composed of appendicular lean mass (ALM, is a heritable trait. Copy number variation (CNV is a common type of human genome variant which may play an important role in the etiology of many human diseases. In this study, we performed genome-wide association analyses of CNV for ALM in 2,286 Caucasian subjects. We then replicated the major findings in 1,627 Chinese subjects. Two CNVs, CNV1191 and CNV2580, were detected to be associated with ALM (p = 2.26×10(-2 and 3.34×10(-3, respectively. In the Chinese replication sample, the two CNVs achieved p-values of 3.26×10(-2 and 0.107, respectively. CNV1191 covers a gene, GTPase of the immunity-associated protein family (GIMAP1, which is important for skeletal muscle cell survival/death in humans. CNV2580 is located in the Serine hydrolase-like protein (SERHL gene, which plays an important role in normal peroxisome function and skeletal muscle growth in response to mechanical stimuli. In summary, our study suggested two novel CNVs and the related genes that may contribute to variation in ALM.

US nuclear power plant operating cost and experience summaries

International Nuclear Information System (INIS)

Kohn, W.E.; Reid, R.L.; White, V.S.

1998-02-01

NUREG/CR-6577, U.S. Nuclear Power Plant Operating Cost and Experience Summaries, has been prepared to provide historical operating cost and experience information on U.S. commercial nuclear power plants. Cost incurred after initial construction are characterized as annual production costs, representing fuel and plant operating and maintenance expenses, and capital expenditures related to facility additions/modifications which are included in the plant capital asset base. As discussed in the report, annual data for these two cost categories were obtained from publicly available reports and must be accepted as having different degrees of accuracy and completeness. Treatment of inconclusive and incomplete data is discussed. As an aid to understanding the fluctuations in the cost histories, operating summaries for each nuclear unit are provided. The intent of these summaries is to identify important operating events; refueling, major maintenance, and other significant outages; operating milestones; and significant licensing or enforcement actions. Information used in the summaries is condensed from annual operating reports submitted by the licensees, plant histories contained in Nuclear Power Experience, trade press articles, and the Nuclear Regulatory Commission (NRC) web site (www.nrc.gov)

US nuclear power plant operating cost and experience summaries

Energy Technology Data Exchange (ETDEWEB)

Kohn, W.E.; Reid, R.L.; White, V.S.

1998-02-01

NUREG/CR-6577, U.S. Nuclear Power Plant Operating Cost and Experience Summaries, has been prepared to provide historical operating cost and experience information on U.S. commercial nuclear power plants. Cost incurred after initial construction are characterized as annual production costs, representing fuel and plant operating and maintenance expenses, and capital expenditures related to facility additions/modifications which are included in the plant capital asset base. As discussed in the report, annual data for these two cost categories were obtained from publicly available reports and must be accepted as having different degrees of accuracy and completeness. Treatment of inconclusive and incomplete data is discussed. As an aid to understanding the fluctuations in the cost histories, operating summaries for each nuclear unit are provided. The intent of these summaries is to identify important operating events; refueling, major maintenance, and other significant outages; operating milestones; and significant licensing or enforcement actions. Information used in the summaries is condensed from annual operating reports submitted by the licensees, plant histories contained in Nuclear Power Experience, trade press articles, and the Nuclear Regulatory Commission (NRC) web site (www.nrc.gov).

Operational limits and conditions and operating procedures for research reactors. Safety guide

International Nuclear Information System (INIS)

2008-01-01

This publication provides practical guidance on all important aspects of developing, formulating and presenting the operational limits and conditions as well as the operating procedures for research reactors. It covers the concept of operational limits and conditions, their content, and the responsibilities of the operating organization with respect to their establishment, modification, documentation and compliance. The guidance also covers the training of operating personnel on performing periodic testing, established by the operational limits and conditions, and operating procedures

Effective Human Resource Management is of Vital Importance to the Achievement of Organizational Strategic Goals

Institute of Scientific and Technical Information of China (English)

黄嘉

2014-01-01

Strategic human resource management is playing a more and more important role in modern organization management. Recruitment is the front line of human resource management. The effectiveness of recruitment directly influences the normal operation and management of business. The aim of this report is to identify a recruitment procedure that can solve the current problems of Dongfeng Cinema Equipment Company, supporting by related strategic human resource theories and concepts. It found out that different recruitment policy and procedure should be adopted according to the different developing stage of organization, and the scientific and systematic evaluation mechanism is also of vital importance.

Use of safety analysis results to support process operation

International Nuclear Information System (INIS)

Karvonen, I.; Heino, P.

1990-01-01

Safety and risk analysis carried out during the design phase of a process plant produces useful knowledge about the behavior and the disturbances of the system. This knowledge, however, often remains to the designer though it would be of benefit to the operators and supervisors of the process plant, too. In Technical Research Centre of Finland a project has been started to plan and construct a prototype of an information system to make use of the analysis knowledge during the operation phase. The project belongs to a Nordic KRM project (Knowledge Based Risk Management System). The information system is planned to base on safety and risk analysis carried out during the design phase and completed with operational experience. The safety analysis includes knowledge about potential disturbances, their causes and consequences in the form of Hazard and Operability Study, faut trees and/or event trees. During the operation disturbances can however, occur, which are not included in the safety analysis, or the causes or consequences of which have been incompletely identified. Thus the information system must also have an interface for the documentation of the operational knowledge missing from the analysis results. The main tasks off the system when supporting the management of a disturbance are to identify it (or the most important of the coexistent ones) from the stored knowledge and to present it in a proper form (for example as a deviation graph). The information system may also be used to transfer knowledge from one shift to another and to train process personnel

Plant operator performance evaluation system

International Nuclear Information System (INIS)

Ujita, Hiroshi; Fukuda, Mitsuko; Kubota, Ryuji.

1989-01-01

A plant operator performance evaluation system to analyze plant operation records during accident training and to identify and classify operator errors has been developed for the purpose of supporting realization of a training and education system for plant operators. A knowledge engineering technique was applied to evaluation of operator behavior by both even-based and symptom-based procedures, in various situations including event transition due to multiple failures or operational errors. The system classifies the identified errors as to their single and double types based on Swain's error classification and the error levels reflecting Rasmussen's cognitive level, and it also evaluates the effect of errors on plant state and then classifies error influence, using 'knowledge for phenomena and operations', as represented by frames. It has additional functions for analysis of error statistics and knowledge acquisition support of 'knowledge for operations'. The system was applied to a training analysis for a scram event in a BWR plant, and its error analysis function was confirmed to be effective by operational experts. (author)

Energy Efficient Mobile Operating Systems

OpenAIRE

Muhammad Waseem

2013-01-01

Energy is an important resource in mobile computers now days. It is important to manage energy in efficient manner so that energy consumption will be reduced. Developers of operating system decided to increase the battery life time of mobile phones at operating system level. So, design of energy efficient mobile operating system is the best way to reduce the energy consumption in mobile devices. In this paper, currently used energy efficient mobile operating system is discussed and compared. ...

Quantification of Operational Learning in Minimal Invasive Extracorporeal Circulation.

Science.gov (United States)

Anastasiadis, Kyriakos; Antonitsis, Polychronis; Asteriou, Christos; Argiriadou, Helena; Deliopoulos, Apostolos; Konstantinou, Dimitrios; Grosomanidis, Vassilios; Tossios, Paschalis

2017-07-01

Minimal invasive extracorporeal circulation (MiECC) has initiated important new efforts within science and technology towards a more physiologic perfusion. In this study, we aim to investigate the learning curve of our center regarding MiECC. We studied a series of 150 consecutive patients who underwent elective coronary artery bypass grafting by the same surgical team during the initial phase of MiECC application. Patients were randomly assigned into two groups. Group A (n = 75) included patients operated on MiECC, while group B (n = 75) included patients operated with conventional cardiopulmonary bypass (cCPB). The primary end-point of the study was to identify whether there is a learning curve when operating on MiECC. The following parameters were unrelated with increasing experience, even though the results favored MiECC use: reduced CPB duration (102.9 ± 25 vs. 122.2 ± 33 min, P learning applied to postoperative hematocrit and hemoglobin levels (R 2  = 0.098, P = 0.006). We identified that advantages of MiECC technology in terms of reduced hemodilution and improved end-organ protection and clinical outcome are evident from the first patient. Optimal results are obtained with 50 cases; this refers mainly to significant reduction in the need for intraoperative blood transfusion. Teamwork from surgeons, anesthesiologists, and perfusionists is of paramount importance in order to maximize the clinical benefits from this technology. © 2016 International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

Job task characteristics of Australian emergency services volunteers during search and rescue operations.

Science.gov (United States)

Silk, Aaron; Lenton, Gavin; Savage, Robbie; Aisbett, Brad

2018-02-01

Search and rescue operations are necessary in locating, assisting and recovering individuals lost or in distress. In Australia, land-based search and rescue roles require a range of physically demanding tasks undertaken in dynamic and challenging environments. The aim of the current research was to identify and characterise the physically demanding tasks inherent to search and rescue operation personnel within Australia. These aims were met through a subjective job task analysis approach. In total, 11 criterion tasks were identified by personnel. These tasks were the most physically demanding, frequently occurring and operationally important tasks to these specialist roles. Muscular strength was the dominant fitness component for 7 of the 11 tasks. In addition to the discrete criterion tasks, an operational scenario was established. With the tasks and operational scenario identified, objective task analysis procedures can be undertaken so that practitioners can implement evidence-based strategies, such as physical selection procedures and task-based physical training programs, commensurate with the physical demands of search and rescue job roles. Practitioner Summary: The identification of physically demanding tasks amongst specialist emergency service roles predicates health and safety strategies which can be incorporated into organisations. Knowledge of physical task parameters allows employers to mitigate injury risk through the implementation of strategies modelled on the precise physical demands of the role.

Human factors review of electric power dispatch control centers. Volume 4. Operator information needs. Final report

Energy Technology Data Exchange (ETDEWEB)

Miller, R.J.; Najaf-Zadeh, K.; Darlington, H.T.; McNair, H.D.; Seidenstein, S.; Williams, A.R.

1982-10-01

Human factors is a systems-oriented interdisciplinary specialty concerned with the design of systems, equipment, facilities and the operational environment. An important aspect leading to the design requirements is the determination of the information requirements for electric power dispatch control centers. There are significant differences between the system operator's actions during normal and degraded states of power system operation, and power system restoration. This project evaluated the information the operator requires for normal power system and control system operations and investigates the changes of information required by the operator as the power system and/or the control system degrades from a normal operating state. The Phase II study, published in two volumes, defines power system states and control system conditions to which operator information content can be related. This volume presents detailed data concerning operator information needs that identify the needs for and the uses of power system information by a system operator in conditions ranging from normal through degraded operation. The study defines power system states and control system conditions to which operator information content can be related, and it identifies the requisite information as consistent with current industry practice so as to aid control system designers. Training requirements are also included for planning entry-level and follow-on training for operators.

Study for on-line system to identify inadvertent control rod drops in PWR reactors using ex-core detector and thermocouple measures

International Nuclear Information System (INIS)

Souza, Thiago J.; Medeiros, Jose A.C.C.; Goncalves, Alessandro C.

2015-01-01

Accidental control rod drops event in PWR reactors leads to an unsafe operating condition. It is important to quickly identify the rod to minimize undesirable effects in such a scenario. In this event, there is a distortion in the power distribution and temperature in the reactor core. The goal of this study is to develop an on-line model to identify the inadvertent control rod dropped in PWR reactor. The proposed model is based on physical correlations and pattern recognition of ex-core detector responses and thermocouples measures. The results of the study demonstrated the feasibility of an on-line system, contributing to safer operation conditions and preventing undesirable effects, as its shutdown. (author)

Study for on-line system to identify inadvertent control rod drops in PWR reactors using ex-core detector and thermocouple measures

Energy Technology Data Exchange (ETDEWEB)

Souza, Thiago J.; Medeiros, Jose A.C.C.; Goncalves, Alessandro C., E-mail: tsouza@nuclear.ufrj.br, E-mail: canedo@lmp.ufrj.br, E-mail: alessandro@nuclear.ufrj.br [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear

2015-07-01

Accidental control rod drops event in PWR reactors leads to an unsafe operating condition. It is important to quickly identify the rod to minimize undesirable effects in such a scenario. In this event, there is a distortion in the power distribution and temperature in the reactor core. The goal of this study is to develop an on-line model to identify the inadvertent control rod dropped in PWR reactor. The proposed model is based on physical correlations and pattern recognition of ex-core detector responses and thermocouples measures. The results of the study demonstrated the feasibility of an on-line system, contributing to safer operation conditions and preventing undesirable effects, as its shutdown. (author)

Neutronics Phenomena Important in Modeling and Simulation of Liquid-Fuel Molten Salt Reactors

Energy Technology Data Exchange (ETDEWEB)

Diamond, David J.

2018-11-11

This paper discusses liquid-fuel molten salt reactors, how they will operate under normal, transient, and accident conditions, and the results of an expert elicitation to determine the corresponding neutronic phenomena important to understanding their behavior. Identifying these phenomena will enable the U.S. Nuclear Regulatory Commission (NRC) to develop or identify modeling functionalities and tools required to carry out confirmatory analyses that examine the validity and accuracy of applicants’ calculations and help determine the margin of safety in plant design. NRC frequently does an expert elicitation using a Phenomena Identification and Ranking Table (PIRT) to identify and evaluate the state of knowledge of important modeling phenomena. However, few details about the design of these reactors and the sequence of events during accidents are known, so the process used was considered a preliminary PIRT. A panel met to define phenomena that would need to be modeled and considered the impact/importance of each phenomenon with respect to specific figures-of-merit (FoMs) (e.g., power distribution, fluence, kinetics parameters and reactivity). Each FoM reflected a potential impact on radionuclide release or loss of a barrier to release. The panel considered what the path forward might be with respect to being able to model the phenomenon in a simulation code. Results are explained for both thermal and fast spectrum designs.

Operational safety of nuclear power plants

International Nuclear Information System (INIS)

Tanguy, P.

1987-01-01

The operational safety of nuclear power plants has become an important safety issue since the Chernobyl accident. A description is given of the various aspects of operational safety, including the importance of human factors, responsibility, the role and training of the operator, the operator-machine interface, commissioning and operating procedures, experience feedback, and maintenance. The lessons to be learnt from Chernobyl are considered with respect to operator errors and the management of severe accidents. Training of personnel, operating experience feedback, actions to be taken in case of severe accidents, and international cooperation in the field of operational safety, are also discussed. (U.K.)

Operating experience feedback report - Solenoid-operated valve problems

International Nuclear Information System (INIS)

Ornstein, H.L.

1991-02-01

This report highlights significant operating events involving observed or potential common-mode failures of solenoid-operated valves (SOVs) in US plants. These events resulted in degradation or malfunction of multiple trains of safety systems as well as of multiple safety systems. On the basis of the evaluation of these events, the Office for Analysis and Evaluation of Operational Data (AEOD) of the US Nuclear Regulatory Commission (NRC) concludes that the problems with solenoid-operated valves are an important issue that needs additional NRC and industry attention. This report also provides AEOD's recommendations for actions to reduce the occurrence of SOV common-mode failures. 115 refs., 7 figs., 2 tabs

75 FR 60694 - Taking and Importing Marine Mammals; Naval Explosive Ordnance Disposal School Training Operations...

Science.gov (United States)

2010-10-01

... Marine Mammals, by Harassment, Incidental to Naval Explosive Ordnance Disposal School Training Operations... School Training Operations at Eglin Air Force Base, Florida AGENCY: National Marine Fisheries Service... authorization to take marine mammals, by Level B harassment, incidental to Naval Explosive Ordnance Disposal...

Prevalence of operator fatigue in winter maintenance operations.

Science.gov (United States)

Camden, Matthew C; Medina-Flintsch, Alejandra; Hickman, Jeffrey S; Bryce, James; Flintsch, Gerardo; Hanowski, Richard J

2018-02-02

Similar to commercial motor vehicle drivers, winter maintenance operators are likely to be at an increased risk of becoming fatigued while driving due to long, inconsistent shifts, environmental stressors, and limited opportunities for sleep. Despite this risk, there is little research concerning the prevalence of winter maintenance operator fatigue during winter emergencies. The purpose of this research was to investigate the prevalence, sources, and countermeasures of fatigue in winter maintenance operations. Questionnaires from 1043 winter maintenance operators and 453 managers were received from 29 Clear Road member states. Results confirmed that fatigue was prevalent in winter maintenance operations. Over 70% of the operators and managers believed that fatigue has a moderate to significant impact on winter maintenance operations. Approximately 75% of winter maintenance operators reported to at least sometimes drive while fatigued, and 96% of managers believed their winter maintenance operators drove while fatigued at least some of the time. Furthermore, winter maintenance operators and managers identified fatigue countermeasures and sources of fatigue related to winter maintenance equipment. However, the countermeasures believed to be the most effective at reducing fatigue during winter emergencies (i.e., naps) were underutilized. For example, winter maintenance operators reported to never use naps to eliminate fatigue. These results indicated winter maintenance operations are impacted by operator fatigue. These results support the increased need for research and effective countermeasures targeting winter maintenance operator fatigue. Copyright © 2018 Elsevier Ltd. All rights reserved.

The importance of flexible power plant operation for Jiangsu's wind integration

DEFF Research Database (Denmark)

Hong, Lixuan; Lund, Henrik; Möller, Bernd

2012-01-01

This paper presents the influence of different regulation strategies on wind energy integration into the existing energy system of Jiangsu. The ability of wind integration is defined in terms of the ability to avoid excess electricity production, to conserve primary energy consumption and to redu...... regulations of Jiangsu’s energy system are compared and analyzed in the range of a wind input from 0% to 42% of the total electricity demand. It is concluded that operating power plants in a flexible way facilitates the promotion of more intermittent wind integration....

Energy benchmarking in wastewater treatment plants: the importance of site operation and layout.

Science.gov (United States)

Belloir, C; Stanford, C; Soares, A

2015-01-01

Energy benchmarking is a powerful tool in the optimization of wastewater treatment plants (WWTPs) in helping to reduce costs and greenhouse gas emissions. Traditionally, energy benchmarking methods focused solely on reporting electricity consumption, however, recent developments in this area have led to the inclusion of other types of energy, including electrical, manual, chemical and mechanical consumptions that can be expressed in kWh/m3. In this study, two full-scale WWTPs were benchmarked, both incorporated preliminary, secondary (oxidation ditch) and tertiary treatment processes, Site 1 also had an additional primary treatment step. The results indicated that Site 1 required 2.32 kWh/m3 against 0.98 kWh/m3 for Site 2. Aeration presented the highest energy consumption for both sites with 2.08 kWh/m3 required for Site 1 and 0.91 kWh/m3 in Site 2. The mechanical energy represented the second biggest consumption for Site 1 (9%, 0.212 kWh/m3) and chemical input was significant in Site 2 (4.1%, 0.026 kWh/m3). The analysis of the results indicated that Site 2 could be optimized by constructing a primary settling tank that would reduce the biochemical oxygen demand, total suspended solids and NH4 loads to the oxidation ditch by 55%, 75% and 12%, respectively, and at the same time reduce the aeration requirements by 49%. This study demonstrated that the effectiveness of the energy benchmarking exercise in identifying the highest energy-consuming assets, nevertheless it points out the need to develop a holistic overview of the WWTP and the need to include parameters such as effluent quality, site operation and plant layout to allow adequate benchmarking.

Space shuttle operations integration plan

Science.gov (United States)

1975-01-01

The Operations Integration Plan is presented, which is to provide functional definition of the activities necessary to develop and integrate shuttle operating plans and facilities to support flight, flight control, and operations. It identifies the major tasks, the organizations responsible, their interrelationships, the sequence of activities and interfaces, and the resultant products related to operations integration.

Identifying and prioritizing customer requirements from tractor production by QFD method

Directory of Open Access Journals (Sweden)

H Taghizadeh

2017-05-01

and theoretical bases of this study have been collected with research paper tab and the research data has been collected through four researcher-made questionnaires and interview tools. The questionnaire Type 1, used for determining the most important demands and needs of customers based on five choices Likert scale. The questionnaire Type 2 was for gathering data requirements to hierarchical AHP method, and the questionnaire Type 3 was for doing some evaluation about organization's present situation related with competitor's situation based on customer's demands and needs; and the questionnaire Type 4 had been implemented for finding technical requirement weights respect to customer's demands and needs. The reliability of the type 1, 3 and 4 questionnaires determined by Chronbach's Alpha method; after gathering required data for mentioned statistical test, these questionnaires' reliability rates are obtained: 0.768, 0.784 and 0.793, respectively. As well as, the validity of the questionnaires has been examined with content validity method. In this research, for analyzing the gathered data, while taking into account the different stages of QFD method, t- student statistical test was used for identifing the needs and demands of customers, and AHP was used for determining the priority of needs and demands of customers. Results and Discussion The results of one sample t-test for identifying the customer’s most important demands and needs showed that the factors such as: producing low price tractor, the quality of used auto-parts, sustainability and long-lasting the final production (production life and durability, comfort and peace during work, creating operator cabin, easy access to spare components, the amount of fuel consumption, warranty and maintenance, easy access to official repair stations, technical experts and suitable auto-parts, fast respond of brake system during braking and smooth moving identified the important demands and needs of customers. The results

Use of DNA sequences to identify forensically important fly species and their distribution in the coastal region of Central California.

Science.gov (United States)

Nakano, Angie; Honda, Jeff

2015-08-01

Forensic entomology has gained prominence in recent years, as improvements in DNA technology and molecular methods have allowed insect and other arthropod evidence to become increasingly useful in criminal and civil investigations. However, comprehensive faunal inventories are still needed, including cataloging local DNA sequences for forensically significant Diptera. This multi-year fly-trapping study was built upon and expanded a previous survey of these flies in Santa Clara County, including the addition of genetic barcoding data from collected species of flies. Flies from the families Calliphoridae, Sarcophagidae, and Muscidae were trapped in meat-baited traps set in a variety of locations throughout the county. Flies were identified using morphological features and confirmed by molecular analysis. A total of 16 calliphorid species, 11 sarcophagid species, and four muscid species were collected and differentiated. This study found more species of flies than previous area surveys and established new county records for two calliphorid species: Cynomya cadaverina and Chrysomya rufifacies. Differences were found in fly fauna in different areas of the county, indicating the importance of microclimates in the distribution of these flies. Molecular analysis supported the use of DNA barcoding as an effective method of identifying cryptic fly species. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

OPERATIVE GROUP: EDUCATIONAL PRACTICE AS AN EXPRESSION FOR SELF-CARE IN DIABETES MELLITUS TYPE 2

Directory of Open Access Journals (Sweden)

Mariana Almeida Maia

2013-12-01

Full Text Available The goal is to understand the views of users with type 2 diabetes about their participation in the operating groups and the impact of self-care practices. This is a qualitative descriptive- exploratory held in three basic health units of the sanitary district east of Belo Horizonte and involved the participation of 18 users in 2011. The speeches of the users were analyzed based on content analysis, identifying the categories: exchange of experience, education for self- care, assessment of user participation in the operative groups, Feelings and links between professionals and users. It was noted that the operational groups provided the construction of knowledge through listening, reflection and questioning of reality where the user identified the importance of knowledge about diet, physical activity and treatment. We found that health actions implemented through the operational groups encourage users to think about your lifestyle, characterized as a tool in health education from the perspective of promotion, prevention and control.

A Security Assessment Approach with Graded Importance Score of Security Controls and Asset Consequence for I and C Systems in Operating NPPs

Energy Technology Data Exchange (ETDEWEB)

Lee, Sooill; Kim, Yong Sik; Moon, Insun; Lee, Euijong [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

This paper introduces a security assessment approach with graded importance score of security controls and the asset consequence through an asset and risk analysis to manage the security levels in operating NPPs (Nuclear Power Plants). Whereas, those are being exposed to various types of new and existing cyber threats, vulnerabilities and risks which significantly increase the likelihood that those could be compromised. U.S. NRC(United States Nuclear Regulatory Commission) and KINAC(Korea Institute of Nuclear Nonproliferation And Control) request the cyber security plan by establishing the cyber security program through assessing and managing the potential for adverse effect on safety, security and emergency preparedness functions so as to provide high assurance that critical functions are properly protected from the cyber-attack. This paper shows the security assessment approach with graded importance score of security controls and the asset consequence. It could lead to manage the security levels consistent with the purpose of defense in- depth strategy based on regulatory rule as well as internal risk-based self-assessment. Also, this management of the security level may make effect of encouraging the installation of high ranked countermeasures in order to rapidly increase the security level. Proposed approach could be conducted for the pilot test on the model plants with each reactor type of operating NPPs.

A Security Assessment Approach with Graded Importance Score of Security Controls and Asset Consequence for I and C Systems in Operating NPPs

International Nuclear Information System (INIS)

Lee, Sooill; Kim, Yong Sik; Moon, Insun; Lee, Euijong

2016-01-01

This paper introduces a security assessment approach with graded importance score of security controls and the asset consequence through an asset and risk analysis to manage the security levels in operating NPPs (Nuclear Power Plants). Whereas, those are being exposed to various types of new and existing cyber threats, vulnerabilities and risks which significantly increase the likelihood that those could be compromised. U.S. NRC(United States Nuclear Regulatory Commission) and KINAC(Korea Institute of Nuclear Nonproliferation And Control) request the cyber security plan by establishing the cyber security program through assessing and managing the potential for adverse effect on safety, security and emergency preparedness functions so as to provide high assurance that critical functions are properly protected from the cyber-attack. This paper shows the security assessment approach with graded importance score of security controls and the asset consequence. It could lead to manage the security levels consistent with the purpose of defense in- depth strategy based on regulatory rule as well as internal risk-based self-assessment. Also, this management of the security level may make effect of encouraging the installation of high ranked countermeasures in order to rapidly increase the security level. Proposed approach could be conducted for the pilot test on the model plants with each reactor type of operating NPPs

Groundwater science in water-utility operations: global reflections on current status and future needs

Science.gov (United States)

Foster, Stephen; Sage, Rob

2017-08-01

The relevance of groundwater science to water-utility operations is analysed from a broad international perspective, identifying key concerns and specific opportunities for the future. The strategic importance worldwide of water utilities assuming the role of lead stakeholders for integrated groundwater resource management, recognizing their often considerable technical know-how and highly significant data holdings, is emphasized. Concurrently, the utilities themselves will need an ever-closer appreciation of groundwater-system behaviour if they are to manage efficiently their water-supply and wastewater operations.

Measures of risk importance and their applications

International Nuclear Information System (INIS)

Vesely, W.E.; Davis, T.C.; Denning, R.S.; Saltos, N.

1983-07-01

This work is part of a project being conducted for the Division of Risk Analysis (DRA) of the Nuclear Regulatory Commission (NRC). The objectives of the project are to evaluate the importances of containment, the different safety functions, and other various contributers as assessed in probabilistic risk analyses and to identify generic conclusions regarding the importances. Effective display of the importances is an important part of these objectives. To address these objectives, measures of risk importance need to be first identified and then they need to be evaluated for the different risk analyses which have been performed. This report describes the risk importance measures that were defined and were applied to the risk analyses which were performed as part of the Reactor Safety Study Methodology Applications Program (RSSMAP). The risk importance measures defined in this report measure the importance of features not only with regard to risk reduction but also with regard to reliability assurance, or risk maintenance. The goal of this report is not to identify new mathematical formulas for risk importance but to show how importance measures can be interpreted and can be applied

Operation and Maintenance Plan for the 300-FF-5 Operable Unit

International Nuclear Information System (INIS)

Singleton, K.M.

1996-09-01

This document is the operation and maintenance plan for the 300-FF-5 groundwater operable unit. The purpose of this plan is to identify tasks necessary to verify the effectiveness of the selected alternative. This plan also describes the monitoring program and administrative tasks that will be used as the preferred alternative for the remediation of groundwater in the 300-FF-5 Operable Unit. The preferred alternative selected for remediation of groundwater consists of institutional controls

Assessment of nonintrusive methods for monitoring the operational readiness of solenoid-operated valves

International Nuclear Information System (INIS)

Kryter, R.C.

1988-01-01

Solenoid-operated valves (SOVs) are being studied at Oak Ridge National Laboratory as part of the USNRC Nuclear Plant Aging Research (NPAR) Program. The primary objective of the study is to identify and recommend methods for inspection, surveillance, and maintenance of SOVs that can ensure their operational readiness-- that is, their ability to perform required safety functions under all anticipated operating conditions. An earlier (Phase I) study described SOV failure modes and causes and identified measurable parameters that might be used to monitor the various degradations that lead to functional failure. The present (Phase II) study focuses on devising and then demonstrating the effectiveness of techniques and/or equipment with which to measure the previously identified performance parameters and thus detect and trend the progress of any degradation. Several nonintrusive techniques are currently under investigation. Recent experimental results which demonstrate the feasibility and practicality of the techniques being studied are presented. 4 refs., 6 figs., 2 tabs

Molecular characterization of NRXN1 deletions from 19,263 clinical microarray cases identifies exons important for neurodevelopmental disease expression

Science.gov (United States)

Lowther, Chelsea; Speevak, Marsha; Armour, Christine M.; Goh, Elaine S.; Graham, Gail E.; Li, Chumei; Zeesman, Susan; Nowaczyk, Malgorzata J.M.; Schultz, Lee-Anne; Morra, Antonella; Nicolson, Rob; Bikangaga, Peter; Samdup, Dawa; Zaazou, Mostafa; Boyd, Kerry; Jung, Jack H.; Siu, Victoria; Rajguru, Manjulata; Goobie, Sharan; Tarnopolsky, Mark A.; Prasad, Chitra; Dick, Paul T.; Hussain, Asmaa S.; Walinga, Margreet; Reijenga, Renske G.; Gazzellone, Matthew; Lionel, Anath C.; Marshall, Christian R.; Scherer, Stephen W.; Stavropoulos, Dimitri J.; McCready, Elizabeth; Bassett, Anne S.

2016-01-01

Purpose The purpose of the current study was to assess the penetrance of NRXN1 deletions. Methods We compared the prevalence and genomic extent of NRXN1 deletions identified among 19,263 clinically referred cases to that of 15,264 controls. The burden of additional clinically relevant CNVs was used as a proxy to estimate the relative penetrance of NRXN1 deletions. Results We identified 41 (0.21%) previously unreported exonic NRXN1 deletions ascertained for developmental delay/intellectual disability, significantly greater than in controls [OR=8.14 (95% CI 2.91–22.72), p< 0.0001)]. Ten (22.7%) of these had a second clinically relevant CNV. Subjects with a deletion near the 3′ end of NRXN1 were significantly more likely to have a second rare CNV than subjects with a 5′ NRXN1 deletion [OR=7.47 (95% CI 2.36–23.61), p=0.0006]. The prevalence of intronic NRXN1 deletions was not statistically different between cases and controls (p=0.618). The majority (63.2%) of intronic NRXN1 deletion cases had a second rare CNV, a two-fold greater prevalence than for exonic NRXN1 deletion cases (p=0.0035). Conclusions The results support the importance of exons near the 5′ end of NRXN1 in the expression of neurodevelopmental disorders. Intronic NRXN1 deletions do not appear to substantially increase the risk for clinical phenotypes. PMID:27195815

Cognitive skill training for nuclear power plant operational decision making

Energy Technology Data Exchange (ETDEWEB)

Mumaw, R.J.; Swatzler, D.; Roth, E.M. [Westinghouse Electric Corp., Pittsburgh, PA (United States); Thomas, W.A. [Quantum Technologies, Inc., Oak Brook, IL (United States)

1994-06-01

Training for operator and other technical positions in the commercial nuclear power industry traditionally has focused on mastery of the formal procedures used to control plant systems and processes. However, decisionmaking tasks required of nuclear power plant operators involve cognitive skills (e.g., situation assessment, planning). Cognitive skills are needed in situations where formal procedures may not exist or may not be as prescriptive, as is the case in severe accident management (SAM). The Westinghouse research team investigated the potential cognitive demands of SAM on the control room operators and Technical Support Center staff who would be most involved in the selection and execution of severe accident control actions. A model of decision making, organized around six general cognitive processes, was developed to identify the types of cognitive skills that may be needed for effective performance. Also, twelve SAM scenarios were developed to reveal specific decision-making difficulties. Following the identification of relevant cognitive skills, 19 approaches for training individual and team cognitive skills were identified. A review of these approaches resulted in the identification of general characteristics that are important in effective training of cognitive skills.

Cognitive skill training for nuclear power plant operational decision making

International Nuclear Information System (INIS)

Mumaw, R.J.; Swatzler, D.; Roth, E.M.; Thomas, W.A.

1994-06-01

Training for operator and other technical positions in the commercial nuclear power industry traditionally has focused on mastery of the formal procedures used to control plant systems and processes. However, decisionmaking tasks required of nuclear power plant operators involve cognitive skills (e.g., situation assessment, planning). Cognitive skills are needed in situations where formal procedures may not exist or may not be as prescriptive, as is the case in severe accident management (SAM). The Westinghouse research team investigated the potential cognitive demands of SAM on the control room operators and Technical Support Center staff who would be most involved in the selection and execution of severe accident control actions. A model of decision making, organized around six general cognitive processes, was developed to identify the types of cognitive skills that may be needed for effective performance. Also, twelve SAM scenarios were developed to reveal specific decision-making difficulties. Following the identification of relevant cognitive skills, 19 approaches for training individual and team cognitive skills were identified. A review of these approaches resulted in the identification of general characteristics that are important in effective training of cognitive skills

Pre-operative assessment and post-operative care in elective shoulder surgery.

Science.gov (United States)

Akhtar, Ahsan; Macfarlane, Robert J; Waseem, Mohammad

2013-01-01

Pre-operative assessment is required prior to the majority of elective surgical procedures, primarily to ensure that the patient is fit to undergo surgery, whilst identifying issues that may need to be dealt with by the surgical or anaesthetic teams. The post-operative management of elective surgical patients begins during the peri-operative period and involves several health professionals. Appropriate monitoring and repeated clinical assessments are required in order for the signs of surgical complications to be recognised swiftly and adequately. This article examines the literature regarding pre-operative assessment in elective orthopaedic surgery and shoulder surgery, whilst also reviewing the essentials of peri- and post-operative care. The need to recognise common post-operative complications early and promptly is also evaluated, along with discussing thromboprophylaxis and post-operative analgesia following shoulder surgery.

Safety relevant failure mechanisms in the post-operational phase

International Nuclear Information System (INIS)

Mayer, Gerhard; Stiller, Jan Christopher; Roemer, Sarah

2017-03-01

When the 13"t"h amendment of the Atomic Energy Act came into force, eight Germ an nuclear power plant units had their power operating licences revoked and are now in the so-called post operation phase. Of the remaining nuclear power plants, one have by now also entered the post operation phase, with those left in operation bound for entering this phase sometime between now and the end of 2022. Therefore, failure mechanisms that are particularly relevant for post operation were to be identified and described in the frame of the present project. To do so, three major steps were taken: Firstly, recent national and international pertinent literature was evaluated to obtain indications of failure mechanisms in the post operation phase. It turned out that most of the national and international literature deals with the general procedure of the transition from power operation to decommissioning and dismantling. However, there were also some documents providing detailed indications of possible failure mechanisms in post operation. This includes e.g. the release of radioactive materials caused by the drop of containers, chemical impacts on systems important to safety in connection with decontamination work, and corrosion in connection with the storage of the core in the spent fuel pool, with the latter leading to the jamming of the fuel assemblies in the storage racks and a possible reduction of coolant circulation. In a second step, three safety analyses of pressurised water reactors prepared by the respective plant operators were evaluated to identify failure mechanisms based on systems engineering. The failure mechanisms that were found here include e.g. faults in the boric acid concentration of the reactor coolant, damage to the equipment airlock upon the unloading of Castor casks, leakages in connection with primary system decontamination, and the drop of packages holding radioactive residual materials or waste with subsequent mobilisation of radioactive aerosols

A methodology for nuclear power plant operational events evaluation

International Nuclear Information System (INIS)

Araujo, Jeferson

2015-01-01

to identify trends that might pass unnoticed. There are several methodologies for evaluation of operational events, specifically, for the determination of the causes of the event, where the concepts of root cause, direct cause and causal factors, among others. However, the most recent methodology in use in Brazil, date of 2003. The subject is so important that there is national legislation dealing with the theme, also it need of update. The actual regulations establishes criteria for notification of the occurrence of events considered significant for safety and establishes criteria and deadlines for the issuance of the report. Is also discussed the relationship between occurrence of operational events and a potential application for the life extension of the nuclear power plants, considering the regulatory focus, theme quite present in the international field. The present study intends to present a modern, appropriate methodology for evaluation of operational events, focusing on regulatory aspects and verify its applicability to nuclear power plants. Will also be presented a study of the occurrence of events, focusing on the last five years of operation. Finally will be also presented to international trends in development on this area. (author)

A methodology for nuclear power plant operational events evaluation

Energy Technology Data Exchange (ETDEWEB)

Araujo, Jeferson, E-mail: jeferson@cnen.gov.br [Comissao Nacional de Energia Nuclear (CGRC/CNEN), Rio de janeiro, RJ (Brazil). Coordenacao Geral de Reatores e do Ciclo de Combustivel; Costa, Sergio Dias, E-mail: sergiodiascosta@hotmail.com [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

2015-07-01

to identify trends that might pass unnoticed. There are several methodologies for evaluation of operational events, specifically, for the determination of the causes of the event, where the concepts of root cause, direct cause and causal factors, among others. However, the most recent methodology in use in Brazil, date of 2003. The subject is so important that there is national legislation dealing with the theme, also it need of update. The actual regulations establishes criteria for notification of the occurrence of events considered significant for safety and establishes criteria and deadlines for the issuance of the report. Is also discussed the relationship between occurrence of operational events and a potential application for the life extension of the nuclear power plants, considering the regulatory focus, theme quite present in the international field. The present study intends to present a modern, appropriate methodology for evaluation of operational events, focusing on regulatory aspects and verify its applicability to nuclear power plants. Will also be presented a study of the occurrence of events, focusing on the last five years of operation. Finally will be also presented to international trends in development on this area. (author)

Identifying the limitations of conventional biofiltration of diffuse methane emissions at long-term operation.

Science.gov (United States)

Gómez-Cuervo, S; Hernández, J; Omil, F

2016-08-01

There is growing international concern about the increasing levels of greenhouse gases in the atmosphere, particularly CO2 and methane. The emissions of methane derived from human activities are associated with large flows and very low concentrations, such as those emitted from landfills and wastewater treatment plants, among others. The present work was focused on the biological methane degradation at diffuse concentrations (0.2% vv(-1)) in a conventional biofilter using a mixture of compost, perlite and bark chips as carrier. An extensive characterization of the process was carried out at long-term operation (250 days) in a fully monitored pilot plant, achieving stable conditions during the entire period. Operational parameters such as waterings, nitrogen addition and inlet loads and contact time influences were evaluated. Obtained results indicate that empty bed residence times within 4-8 min are crucial to maximize elimination rates. Waterings and the type of nitrogen supplied in the nutrient solution (ammonia or nitrate) have a strong impact on the biofilter performance. The better results compatible with a stable operation were achieved using nitrate, with elimination capacities up to 7.6 ± 1.1 g CH4 m(-3 )h(-1). The operation at low inlet concentrations (IC) implied that removal rates obtained were quite limited (ranging 3-8 g CH4 m(-3 )h(-1)); however, these results could be significantly increased (up to 20.6 g CH4 m(-3) h(-1)) at higher IC, which indicates that the mass transfer from the gas to the liquid layer surrounding the biofilm is a key limitation of the process.

Thinking ahead of the surgeon. An interview study to identify scrub nurses' non-technical skills.

Science.gov (United States)

Mitchell, Lucy; Flin, Rhona; Yule, Steven; Mitchell, Janet; Coutts, Kathy; Youngson, George

2011-07-01

Efforts to reduce adverse event rates in healthcare have revealed the importance of identifying the essential non-technical (cognitive and social) skills for safe and effective performance. Previous research on non-technical skills for operating theatre staff has concentrated on doctors rather than nursing professionals. The aim of the study was to identify the critical non-technical skills that are essential for safe and effective performance as an operating theatre scrub nurse. Experienced scrub nurses (n = 25) and consultant surgeons (n = 9) from four Scottish hospitals were interviewed using a semi-structured format. The protocols were designed to identify the main social and cognitive skills required by scrub nurses. Interviews were digitally recorded, transcribed verbatim and independently coded to extract behaviours in order to produce a list of the main non-technical skills for safe and effective scrub nurse performance. The non-technical skills of situation awareness, communication, teamwork, task management and coping with stress were identified as key to successful scrub nurse task performance. Component sets of behaviours for each of these categories were also noted. The interviews with subject matter experts from scrub nursing and surgery produced preliminary evidence that situation awareness, communication, teamwork and coping with stress are the principal non-technical skills required for effective performance as a scrub nurse. Copyright © 2010 Elsevier Ltd. All rights reserved.

U.S. Nuclear Power Plant Operating Cost and Experience Summaries

International Nuclear Information System (INIS)

Reid, RL

2003-01-01

The ''U.S. Nuclear Power Plant Operating Cost and Experience Summaries'' (NUREG/CR-6577, Supp. 2) report has been prepared to provide historical operating cost and experience information on U.S. commercial nuclear power plants during 2000-2001. Costs incurred after initial construction are characterized as annual production costs, which represent fuel and plant operating and maintenance expenses, and capital expenditures related to facility additions/modifications, which are included in the plant capital asset base. As discussed in the report, annual data for these two cost categories were obtained from publicly available reports and must be accepted as having different degrees of accuracy and completeness. Treatment of inconclusive and incomplete data is discussed. As an aid to understanding the fluctuations in the cost histories, operations summaries for each nuclear unit are provided. The intent of these summaries is to identify important operating events; refueling, major maintenance, and other significant outages; operating milestones; and significant licensing or enforcement actions. Information used in the summaries is condensed from operating reports submitted by the licensees, the Nuclear Regulatory Commission (NRC) database for enforcement actions, and outage reports

DNA-SIP identifies sulfate-reducing Clostridia as important toluene degraders in tar-oil-contaminated aquifer sediment

Energy Technology Data Exchange (ETDEWEB)

Winderl, C.; Penning, H.; von Netzer, F.; Meckenstock, R.U.; Lueders, T. [Helmholtz Zentrum Munchen, Neuherberg (Germany)

2010-10-15

Global groundwater resources are constantly challenged by a multitude of contaminants such as aromatic hydrocarbons. Especially in anaerobic habitats, a large diversity of unrecognized microbial populations may be responsible for their degradation. Still, our present understanding of the respective microbiota and their ecophysiology is almost exclusively based on a small number of cultured organisms, mostly within the Proteobacteria. Here, by DNA-based stable isotope probing (SIP), we directly identified the most active sulfate-reducing toluene degraders in a diverse sedimentary microbial community originating from a tar-oil-contaminated aquifer at a former coal gasification plant. On incubation of fresh sediments with {sup 13}C{sub 7}-toluene, the production of both sulfide and (CS{sub 2}){sup 13}CO{sub 2} was clearly coupled to the {sup 13}Clabeling of DNA of microbes related to Desulfosporosinus spp. within the Peptococcaceae (Clostridia). The screening of labeled DNA fractions also suggested a novel benzylsuccinate synthase alpha-subunit (bssA) sequence type previously only detected in the environment to be tentatively affiliated with these degraders. However, carbon flow from the contaminant into degrader DNA was only similar to 50%, pointing toward high ratios of heterotrophic CS{sub 2}-fixation during assimilation of acetyl-CoA originating from the contaminant by these degraders. These findings demonstrate that the importance of non-proteobacterial populations in anaerobic aromatics degradation, as well as their specific ecophysiology in the subsurface may still be largely ungrasped.

Identifying airborne fungi in Seoul, Korea using metagenomics.

Science.gov (United States)

Oh, Seung-Yoon; Fong, Jonathan J; Park, Myung Soo; Chang, Limseok; Lim, Young Woon

2014-06-01

Fungal spores are widespread and common in the atmosphere. In this study, we use a metagenomic approach to study the fungal diversity in six total air samples collected from April to May 2012 in Seoul, Korea. This springtime period is important in Korea because of the peak in fungal spore concentration and Asian dust storms, although the year of this study (2012) was unique in that were no major Asian dust events. Clustering sequences for operational taxonomic unit (OTU) identification recovered 1,266 unique OTUs in the combined dataset, with between 223᾿96 OTUs present in individual samples. OTUs from three fungal phyla were identified. For Ascomycota, Davidiella (anamorph: Cladosporium) was the most common genus in all samples, often accounting for more than 50% of all sequences in a sample. Other common Ascomycota genera identified were Alternaria, Didymella, Khuskia, Geosmitha, Penicillium, and Aspergillus. While several Basidiomycota genera were observed, Chytridiomycota OTUs were only present in one sample. Consistency was observed within sampling days, but there was a large shift in species composition from Ascomycota dominant to Basidiomycota dominant in the middle of the sampling period. This marked change may have been caused by meteorological events. A potential set of 40 allergy-inducing genera were identified, accounting for a large proportion of the diversity present (22.5᾿7.2%). Our study identifies high fungal diversity and potentially high levels of fungal allergens in springtime air of Korea, and provides a good baseline for future comparisons with Asian dust storms.

[Importance of material logistics in the interface management of operation departments: is the supply of sterile equipment a new business area of operation room organization?].

Science.gov (United States)

Schmeck, J; Schmeck, S B; Kohnen, W; Werner, C; Schäfer, M; Gervais, H

2008-08-01

The implementation of diagnosis-related groups (DRGs) sharply increased economic pressure on hospitals. Hence, process optimization was focussed on cost-intensive areas, namely the operation room (OR) departments. Work-flow in the OR is characterized by a mandatory interlocking of the job functions of many different occupational groups and the availability of a variety of different materials. Alternatives for staff assignment optimization have been published in numerous publications dealing with the importance of OR management. In this connection the issue of material logistics in the context of OR management has not been frequently addressed. In order to perform a surgical procedure according to plan, one depends on personnel and on timely availability of the materials needed. Supply of sterilized materials is of utmost importance, because in most hospitals sterilized surgical devices constitute a critical resource. In order to coordinate the OR process with the production flow of sterilized materials, an organizational connection to the OR management makes sense. Hence, in a German university hospital the Department of Hospital Sterile Supplies was integrated into the OR management of the Department of Anesthesiology. This led to a close coordination of work-flow processes, and concomitantly a significant reduction of production costs of sterile supplies could be achieved by direct interaction with the OR. Thus, hospital sterile supplies can reasonably be integrated into an OR management representing a new interesting business area for OR organization.

Thermal-Hydraulics Phenomena Important in Modeling and Simulation of Liquid-Fuel Molten Salt Reactors

Energy Technology Data Exchange (ETDEWEB)

Bajorek, Stephen; Diamond, David J.

2018-11-11

This paper discusses liquid-fuel molten salt reactors, how they will operate under normal, transient, and accident conditions, and the results of an expert elicitation to determine the corresponding thermalhydraulic phenomena important to understanding their behavior. Identifying these phenomena will enable the U.S. Nuclear Regulatory Commission (NRC) to develop or identify modeling functionalities and tools required to carry out confirmatory analyses that examine the validity and accuracy of an applicant’s calculations and help determine the margin of safety in plant design. NRC frequently does an expert elicitation using a Phenomena Identification and Ranking Table (PIRT) to identify and evaluate the state of knowledge of important modeling phenomena. However, few details about the design of these reactors and the sequence of events during accidents are known, so the process used was considered a preliminary PIRT. A panel met to define phenomena that would need to be modeled and considered the impact/importance of each phenomenon with respect to specific figures-of-merit (FoMs) (e.g., salt temperature, velocity, and composition). Each FoM reflected a potential impact on radionuclide release or loss of a barrier to release. The panel considered what the path forward might be with respect to being able to model the phenomenon in a simulation code. Results are explained for both thermal and fast spectrum designs.

75 FR 12734 - Taking and Importing Marine Mammals; Taking Marine Mammals Incidental to Operation of Offshore...

Science.gov (United States)

2010-03-17

... marine mammal or marine mammal stock in the wild by causing disruption of behavioral patterns, including... supplies; production operations; drilling operations; pipeline design, inspection, and maintenance; routine...

High throughput phenotypic selection of Mycobacterium tuberculosis mutants with impaired resistance to reactive oxygen species identifies genes important for intracellular growth.

Directory of Open Access Journals (Sweden)

Olga Mestre

Full Text Available Mycobacterium tuberculosis has the remarkable capacity to survive within the hostile environment of the macrophage, and to resist potent antibacterial molecules such as reactive oxygen species (ROS. Thus, understanding mycobacterial resistance mechanisms against ROS may contribute to the development of new anti-tuberculosis therapies. Here we identified genes involved in such mechanisms by screening a high-density transposon mutant library, and we show that several of them are involved in the intracellular lifestyle of the pathogen. Many of these genes were found to play a part in cell envelope functions, further strengthening the important role of the mycobacterial cell envelope in protection against aggressions such as the ones caused by ROS inside host cells.

Ranking of input parameters importance for BWR stability based on Ringhals-1

International Nuclear Information System (INIS)

Gajev, Ivan; Kozlowski, Tomasz; Xu, Yunlin; Downar, Thomas

2011-01-01

Unstable behavior of Boiling Water Reactors (BWRs) is known to occur during operation at certain power and flow conditions. Uncertainty calculations for BWR stability, based on the Wilks' formula, have been already done for the Ringhals-1 benchmark. In this work, these calculations have been used to identify and rank the most important parameters affecting the stability of the Ringhals-1 plant. The ranking has been done in two different ways and a comparison of these two methods has been demonstrated. Results show that the methods provide different, but meaningful evaluations of the ranking. (author)

Stability of operational taxonomic units: an important but neglected property for analyzing microbial diversity.

Science.gov (United States)

He, Yan; Caporaso, J Gregory; Jiang, Xiao-Tao; Sheng, Hua-Fang; Huse, Susan M; Rideout, Jai Ram; Edgar, Robert C; Kopylova, Evguenia; Walters, William A; Knight, Rob; Zhou, Hong-Wei

2015-01-01

The operational taxonomic unit (OTU) is widely used in microbial ecology. Reproducibility in microbial ecology research depends on the reliability of OTU-based 16S ribosomal subunit RNA (rRNA) analyses. Here, we report that many hierarchical and greedy clustering methods produce unstable OTUs, with membership that depends on the number of sequences clustered. If OTUs are regenerated with additional sequences or samples, sequences originally assigned to a given OTU can be split into different OTUs. Alternatively, sequences assigned to different OTUs can be merged into a single OTU. This OTU instability affects alpha-diversity analyses such as rarefaction curves, beta-diversity analyses such as distance-based ordination (for example, Principal Coordinate Analysis (PCoA)), and the identification of differentially represented OTUs. Our results show that the proportion of unstable OTUs varies for different clustering methods. We found that the closed-reference method is the only one that produces completely stable OTUs, with the caveat that sequences that do not match a pre-existing reference sequence collection are discarded. As a compromise to the factors listed above, we propose using an open-reference method to enhance OTU stability. This type of method clusters sequences against a database and includes unmatched sequences by clustering them via a relatively stable de novo clustering method. OTU stability is an important consideration when analyzing microbial diversity and is a feature that should be taken into account during the development of novel OTU clustering methods.

Selection of important initiating events for Level 1 probabilistic safety assessment study at Puspati TRIGA Reactor

International Nuclear Information System (INIS)

Maskin, M.; Charlie, F.; Hassan, A.; Prak Tom, P.; Ramli, Z.; Mohamed, F.

2016-01-01

Highlights: • Identifying possible important initiating events (IEs) for Level 1 probabilistic safety assessment performed on research nuclear reactor. • Methods in screening and grouping IEs are addressed. • Focusing only on internal IEs due to random failures of components. - Abstract: This paper attempts to present the results in identifying possible important initiating events (IEs) as comprehensive as possible to be applied in the development of Level-1 probabilistic safety assessment (PSA) study. This involves the approaches in listing and the methods in screening and grouping IEs, by focusing only on the internal IEs due to random failures of components and human errors with full power operational conditions and reactor core as the radioactivity source. Five approaches were applied in listing the IEs and each step of the methodology was described and commented. The criteria in screening and grouping the IEs were also presented. The results provided the information on how the Malaysian PSA team applied the approaches in selecting the most probable IEs as complete as possible in order to ensure the set of IEs was identified systematically and as representative as possible, hence providing confidence to the completeness of the PSA study. This study is perhaps one of the first to address classic comprehensive steps in identifying important IEs to be used in a Level-1 PSA study.

Identifying the critical financial ratios for stocks evaluation: A fuzzy delphi approach

Science.gov (United States)

Mokhtar, Mazura; Shuib, Adibah; Mohamad, Daud

2014-12-01

Stocks evaluation has always been an interesting and challenging problem for both researchers and practitioners. Generally, the evaluation can be made based on a set of financial ratios. Nevertheless, there are a variety of financial ratios that can be considered and if all ratios in the set are placed into the evaluation process, data collection would be more difficult and time consuming. Thus, the objective of this paper is to identify the most important financial ratios upon which to focus in order to evaluate the stock's performance. For this purpose, a survey was carried out using an approach which is based on an expert judgement, namely the Fuzzy Delphi Method (FDM). The results of this study indicated that return on equity, return on assets, net profit margin, operating profit margin, earnings per share and debt to equity are the most important ratios.

Properties Important To Mixing For WTP Large Scale Integrated Testing

International Nuclear Information System (INIS)

Koopman, D.; Martino, C.; Poirier, M.

2012-01-01

Large Scale Integrated Testing (LSIT) is being planned by Bechtel National, Inc. to address uncertainties in the full scale mixing performance of the Hanford Waste Treatment and Immobilization Plant (WTP). Testing will use simulated waste rather than actual Hanford waste. Therefore, the use of suitable simulants is critical to achieving the goals of the test program. External review boards have raised questions regarding the overall representativeness of simulants used in previous mixing tests. Accordingly, WTP requested the Savannah River National Laboratory (SRNL) to assist with development of simulants for use in LSIT. Among the first tasks assigned to SRNL was to develop a list of waste properties that matter to pulse-jet mixer (PJM) mixing of WTP tanks. This report satisfies Commitment 5.2.3.1 of the Department of Energy Implementation Plan for Defense Nuclear Facilities Safety Board Recommendation 2010-2: physical properties important to mixing and scaling. In support of waste simulant development, the following two objectives are the focus of this report: (1) Assess physical and chemical properties important to the testing and development of mixing scaling relationships; (2) Identify the governing properties and associated ranges for LSIT to achieve the Newtonian and non-Newtonian test objectives. This includes the properties to support testing of sampling and heel management systems. The test objectives for LSIT relate to transfer and pump out of solid particles, prototypic integrated operations, sparger operation, PJM controllability, vessel level/density measurement accuracy, sampling, heel management, PJM restart, design and safety margin, Computational Fluid Dynamics (CFD) Verification and Validation (V and V) and comparison, performance testing and scaling, and high temperature operation. The slurry properties that are most important to Performance Testing and Scaling depend on the test objective and rheological classification of the slurry (i

PROPERTIES IMPORTANT TO MIXING FOR WTP LARGE SCALE INTEGRATED TESTING

Energy Technology Data Exchange (ETDEWEB)

Koopman, D.; Martino, C.; Poirier, M.

2012-04-26

Large Scale Integrated Testing (LSIT) is being planned by Bechtel National, Inc. to address uncertainties in the full scale mixing performance of the Hanford Waste Treatment and Immobilization Plant (WTP). Testing will use simulated waste rather than actual Hanford waste. Therefore, the use of suitable simulants is critical to achieving the goals of the test program. External review boards have raised questions regarding the overall representativeness of simulants used in previous mixing tests. Accordingly, WTP requested the Savannah River National Laboratory (SRNL) to assist with development of simulants for use in LSIT. Among the first tasks assigned to SRNL was to develop a list of waste properties that matter to pulse-jet mixer (PJM) mixing of WTP tanks. This report satisfies Commitment 5.2.3.1 of the Department of Energy Implementation Plan for Defense Nuclear Facilities Safety Board Recommendation 2010-2: physical properties important to mixing and scaling. In support of waste simulant development, the following two objectives are the focus of this report: (1) Assess physical and chemical properties important to the testing and development of mixing scaling relationships; (2) Identify the governing properties and associated ranges for LSIT to achieve the Newtonian and non-Newtonian test objectives. This includes the properties to support testing of sampling and heel management systems. The test objectives for LSIT relate to transfer and pump out of solid particles, prototypic integrated operations, sparger operation, PJM controllability, vessel level/density measurement accuracy, sampling, heel management, PJM restart, design and safety margin, Computational Fluid Dynamics (CFD) Verification and Validation (V and V) and comparison, performance testing and scaling, and high temperature operation. The slurry properties that are most important to Performance Testing and Scaling depend on the test objective and rheological classification of the slurry (i

Optimal coal import strategy

International Nuclear Information System (INIS)

Chen, C.Y.; Shih, L.H.

1992-01-01

Recently, the main power company in Taiwan has shifted the primary energy resource from oil to coal and tried to diversify the coal supply from various sources. The company wants to have the imported coal meet the environmental standards and operation requirements as well as to have high heating value. In order to achieve these objectives, establishment of a coal blending system for Taiwan is necessary. A mathematical model using mixed integer programming technique is used to model the import strategy and the blending system. 6 refs., 1 tab

The use of flow models for design of plant operating procedures

International Nuclear Information System (INIS)

Lind, M.

1982-03-01

The report describe a systematic approach to the design of operating procedures or sequence automatics for process plant control. It is shown how flow models representing the topology of mass and energy flows on different levels of function provide plant information which is important for the considered design problem. The modelling methodology leads to the definition of three categories of control tasks. Two tasks relate to the regulation and control of changes of levels and flows of mass and energy in a system within a defined mode of operation. The third type relate to the control actions necessary for switching operations involved in changes of operating mode. These control tasks are identified for a given plant as part of the flow modelling activity. It is discussed how the flow model deal with the problem of assigning control task precedence in time eg. during start-up or shut-down operations. The method may be a basis for providing automated procedure support to the operator in unforeseen situations or may be a tool for control design. (auth.)

Regulatory challenges in using nuclear operating experience

International Nuclear Information System (INIS)

2006-01-01

There can be no doubt that the systematic evaluation of operating experience by the operator and the regulator is essential for continued safe operation of nuclear power plants. Recent concerns have been voiced that the operating experience information and insights are not being used effectively to promote safety. If these concerns foreshadow a real trend in OECD countries toward complacency in reporting and analysing operating events and taking corrective actions, then past experience suggests that similar or even more serious events will recur. This report discusses how the regulator can take actions to assure that operators have effective programmes to collect and analyse operating experience and, just as important, for taking steps to follow up with actions to prevent the events and conditions from recurring. These regulatory actions include special inspections of an operator operating experience programme and discussion with senior plant managers to emphasize the importance of having an effective operating experience programme. In addition to overseeing the operator programmes, the regulator has the broader responsibility for assuring that industry-wide trends, both national and international are monitored. To meet these responsibilities, the regulatory body must have its own operating experience programme, and this report discusses the important attributes of such regulatory programmes. It is especially important for the regulator to have the capability for assessing the full scope of operating experience issues, including those that may not be included in an operator operating experience programme, such as new research results, international operating experience, and broad industry trend information. (author)

Ensuring the operational safety of finnish nuclear power plants

International Nuclear Information System (INIS)

Vuorinen, A.

1991-01-01

The Finnish nuclear energy programme has been successful both from the safety and economical point of view. These achievements are based on different factors which are discussed in the paper. Finnish Centre for Radiation and Nuclear Safety (STUK) has specified the technical requirements and procedures to be followed in the design, construction, commissioning and operation of NPPs in a series of guides. The guides are quite demanding and latest results of safety research and technical development are taken into account. Regulatory supervision of Finnish NPPs is comprehensive. As an example of this the regulatory inspection program for operational phase is presented. An important way to ensure operational safety of a NPP is to define a set of limits and conditions to identify limiting safety envelope for plant operation. Practices in Finland are reviewed in the paper. The strategy of Defence in Depth is amongst the fundamental principles of nuclear safety. Two corollary principles of defence of depth are accident prevention and accident mitigation. Means used in following these principles are discussed. (author)

Good practices in heavy water reactor operation

International Nuclear Information System (INIS)

2010-06-01

The value and importance of organizations in the nuclear industry engaged in the collection and analysis of operating experience and best practices has been clearly identified in various IAEA publications and exercises. Both facility safety and operational efficiency can benefit from such information sharing. Such sharing also benefits organizations engaged in the development of new nuclear power plants, as it provides information to assist in optimizing designs to deliver improved safety and power generation performance. In cooperation with Atomic Energy of Canada, Ltd, the IAEA organized the workshop on best practices in Heavy Water Reactor Operation in Toronto, Canada from 16 to 19 September 2008, to assist interested Member States in sharing best practices and to provide a forum for the exchange of information among participating nuclear professionals. This workshop was organized under Technical Cooperation Project INT/4/141, on Status and Prospects of Development for and Applications of Innovative Reactor Concepts for Developing Countries. The workshop participants were experts actively engaged in various aspects of heavy water reactor operation. Participants presented information on activities and practices deemed by them to be best practices in a particular area for consideration by the workshop participants. Presentations by the participants covered a broad range of operational practices, including regulatory aspects, the reduction of occupational dose, performance improvements, and reducing operating and maintenance costs. This publication summarizes the material presented at the workshop, and includes session summaries prepared by the chair of each session and papers submitted by the presenters

Computer-based systems important to safety (COMPSIS) - Reporting guidelines

International Nuclear Information System (INIS)

1999-07-01

The objective of this procedure is to help the user to prepare an COMPSIS report on an event so that important lessons learned are most efficiently transferred to the database. This procedure focuses on the content of the information to be provided in the report rather than on its format. The established procedure follows to large extend the procedure chosen by the IRS incident reporting system. However this database is built for I and C equipment with the purpose of the event report database to collect and disseminate information on events of significance involving Computer-Based Systems important to safety in nuclear power plants, and feedback conclusions and lessons learnt from such events. For events where human performance is dominant to draw lessons, more detailed guidance on the specific information that should be supplied is spelled out in the present procedure. This guidance differs somewhat from that for the provision of technical information, and takes into account that the engineering world is usually less familiar with human behavioural analysis than with technical analysis. The events to be reported to the COMPSIS database should be based on the national reporting criteria in the participating member countries. The aim is that all reports including computer based systems that meet each country reporting criteria should be reported. The database should give a broad picture of events/incidents occurring in operation with computer control systems. As soon as an event has been identified, the insights and lessons learnt to be conveyed to the international nuclear community shall be clearly identified. On the basis of the description of the event, the event shall be analyzed in detail under the aspect of direct and potential impact to plant safety functions. The first part should show the common involvement of operation and safety systems and the second part should show the special aspects of I and C functions, hardware and software

Sustainability management for operating organizations of research reactors

Energy Technology Data Exchange (ETDEWEB)

Kibrit, Eduardo; Aquino, Afonso Rodrigues de, E-mail: ekibrit@ipen.br, E-mail: araquino@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNE-SP), Sao Paulo, SP (Brazil)

2017-07-01

Sustainable development is development that meets the needs of the present without compromising the ability of future generations to meet their own needs. In a country like Brazil, where nuclear activity is geared towards peaceful purposes, any operating organization of research reactor should emphasize its commitment to social, environmental, economic and institutional aspects. Social aspects include research and development, production and supply of radiopharmaceuticals, radiation safety and special training for the nuclear sector. Environmental aspects include control of the surroundings and knowledge directed towards environment preservation. Economic aspects include import substitution and diversification of production. Institutional aspects include technology, innovation and knowledge. These aspects, if considered in the management system of an operating organization of research reactor, will help with its long-term maintenance and success in an increasingly competitive market scenario. About this, we propose a sustainability management system approach for operating organizations of research reactors. A bibliographical review on the theme is made. A methodology for identifying indicators for measuring sustainability in nuclear research reactors processes is also described. Finally, we propose a methodology for sustainability perception assessment to be applied at operating organizations of research reactors. (author)

Sustainability management for operating organizations of research reactors

International Nuclear Information System (INIS)

Kibrit, Eduardo; Aquino, Afonso Rodrigues de

2017-01-01

Sustainable development is development that meets the needs of the present without compromising the ability of future generations to meet their own needs. In a country like Brazil, where nuclear activity is geared towards peaceful purposes, any operating organization of research reactor should emphasize its commitment to social, environmental, economic and institutional aspects. Social aspects include research and development, production and supply of radiopharmaceuticals, radiation safety and special training for the nuclear sector. Environmental aspects include control of the surroundings and knowledge directed towards environment preservation. Economic aspects include import substitution and diversification of production. Institutional aspects include technology, innovation and knowledge. These aspects, if considered in the management system of an operating organization of research reactor, will help with its long-term maintenance and success in an increasingly competitive market scenario. About this, we propose a sustainability management system approach for operating organizations of research reactors. A bibliographical review on the theme is made. A methodology for identifying indicators for measuring sustainability in nuclear research reactors processes is also described. Finally, we propose a methodology for sustainability perception assessment to be applied at operating organizations of research reactors. (author)

Heat transfer operators associated with quantum operations

International Nuclear Information System (INIS)

Aksak, C; Turgut, S

2011-01-01

Any quantum operation applied on a physical system is performed as a unitary transformation on a larger extended system. If the extension used is a heat bath in thermal equilibrium, the concomitant change in the state of the bath necessarily implies a heat exchange with it. The dependence of the average heat transferred to the bath on the initial state of the system can then be found from the expectation value of a Hermitian operator, which is named as the heat transfer operator (HTO). The purpose of this paper is to investigate the relation between the HTOs and the associated quantum operations. Since any given quantum operation on a system can be realized by different baths and unitaries, many different HTOs are possible for each quantum operation. On the other hand, there are also strong restrictions on the HTOs which arise from the unitarity of the transformations. The most important of these is the Landauer erasure principle. This paper is concerned with the question of finding a complete set of restrictions on the HTOs that are associated with a given quantum operation. An answer to this question has been found only for a subset of quantum operations. For erasure operations, these characterizations are equivalent to the generalized Landauer erasure principle. For the case of generic quantum operations, however, it appears that the HTOs obey further restrictions which cannot be obtained from the entropic restrictions of the generalized Landauer erasure principle.

Operational experience with Dragon reactor experiment of relevance to commercial reactors

International Nuclear Information System (INIS)

Capp, P.D.; Simon, R.A.

1976-01-01

An important part of the experience gained during the first ten years of successful power operation of the Dragon Reactor is relevant to the design and operation of future High Temperature Reactors (HTRs). The aspects presented in this paper have been chosen as being particularly applicable to larger HTR systems. Core performance under a variety of conditions is surveyed with particular emphasis on a technique developed for the identification and location of unpurged releasing fuel and the presence of activation and fission products in the core area. The lessons learned during the reflector block replacement are presented. Operating experience with the primary circuit identifies the lack of mixing of gas streams within the hot plenum and the problems of gas streaming in ducts. Helium leakage from the circuit is often greater than the optimum 0.1%/d. Virtually all the leakage problems are associated with the small bore instrument pipework essential for the many experiments associated with the Dragon Reactor Experiment (DRE). Primary circuit maintenance work confirms the generally clean state of the DRE circuit but identifies 137 Cs and 110 Agsup(m) as possible hazards if fuel emitting these isotopes is irradiated. (author)

Operational safety reliability research

International Nuclear Information System (INIS)

Hall, R.E.; Boccio, J.L.

1986-01-01

Operating reactor events such as the TMI accident and the Salem automatic-trip failures raised the concern that during a plant's operating lifetime the reliability of systems could degrade from the design level that was considered in the licensing process. To address this concern, NRC is sponsoring the Operational Safety Reliability Research project. The objectives of this project are to identify the essential tasks of a reliability program and to evaluate the effectiveness and attributes of such a reliability program applicable to maintaining an acceptable level of safety during the operating lifetime at the plant

Quantitative estimation of the human error probability during soft control operations

International Nuclear Information System (INIS)

Lee, Seung Jun; Kim, Jaewhan; Jung, Wondea

2013-01-01

Highlights: ► An HRA method to evaluate execution HEP for soft control operations was proposed. ► The soft control tasks were analyzed and design-related influencing factors were identified. ► An application to evaluate the effects of soft controls was performed. - Abstract: In this work, a method was proposed for quantifying human errors that can occur during operation executions using soft controls. Soft controls of advanced main control rooms have totally different features from conventional controls, and thus they may have different human error modes and occurrence probabilities. It is important to identify the human error modes and quantify the error probability for evaluating the reliability of the system and preventing errors. This work suggests an evaluation framework for quantifying the execution error probability using soft controls. In the application result, it was observed that the human error probabilities of soft controls showed both positive and negative results compared to the conventional controls according to the design quality of advanced main control rooms

MPCV Exercise Operational Volume Analysis

Science.gov (United States)

Godfrey, A.; Humphreys, B.; Funk, J.; Perusek, G.; Lewandowski, B. E.

2017-01-01

In order to minimize the loss of bone and muscle mass during spaceflight, the Multi-purpose Crew Vehicle (MPCV) will include an exercise device and enough free space within the cabin for astronauts to use the device effectively. The NASA Digital Astronaut Project (DAP) has been tasked with using computational modeling to aid in determining whether or not the available operational volume is sufficient for in-flight exercise.Motion capture data was acquired using a 12-camera Smart DX system (BTS Bioengineering, Brooklyn, NY), while exercisers performed 9 resistive exercises without volume restrictions in a 1g environment. Data were collected from two male subjects, one being in the 99th percentile of height and the other in the 50th percentile of height, using between 25 and 60 motion capture markers. Motion capture data was also recorded as a third subject, also near the 50th percentile in height, performed aerobic rowing during a parabolic flight. A motion capture system and algorithms developed previously and presented at last years HRP-IWS were utilized to collect and process the data from the parabolic flight [1]. These motions were applied to a scaled version of a biomechanical model within the biomechanical modeling software OpenSim [2], and the volume sweeps of the motions were visually assessed against an imported CAD model of the operational volume. Further numerical analysis was performed using Matlab (Mathworks, Natick, MA) and the OpenSim API. This analysis determined the location of every marker in space over the duration of the exercise motion, and the distance of each marker to the nearest surface of the volume. Containment of the exercise motions within the operational volume was determined on a per-exercise and per-subject basis. The orientation of the exerciser and the angle of the footplate were two important factors upon which containment was dependent. Regions where the exercise motion exceeds the bounds of the operational volume have been

Organizational environment and operator culture

International Nuclear Information System (INIS)

Morisseau, D.S.; Schoenfeld, I.E.

1988-01-01

The Nuclear Regulatory Commission has historically reviewed corporate and plant level management and organization against the criteria of NUREG-0800, The Standard Review Plan. These criteria address the organizational structure, management control, lines of authority and communication, the range and level of experience, and the availability of manpower to effectively and safely operate the facility. Now that most nuclear power plants have received their operating licenses, the emphasis for review has shifted to the day-to-day operation of the facilities. Along with this has come greater recognition that hardware and engineering systems, through vitally important, are not the only components needed for safe operation of power plants. The people who run and operate these plants are a vitally important component and are an integral part of the entire system, i.e., machinery does not operate in isolation

Operating experience feedback report -- Pressure locking and thermal binding of gate valves

International Nuclear Information System (INIS)

Hsu, C.

1993-03-01

The potential for valve inoperability caused by pressure locking and thermal binding has been known for many years in the nuclear industry. Pressure locking or thermal binding is a common-mode failure mechanism that can prevent a gate valve from opening, and could render redundant trains of safety systems or multiple safety systems inoperable. In spite of numerous generic communications issued in the past by the Nuclear Regulatory Commission (NRC) and industry, pressure locking and thermal binding continues to occur to gate valves installed in safety-related systems of both boding water reactors (BWRs) and pressurized water reactors (PWRs). The generic communications to date have not led to effective industry action to fully identify, evaluate, and correct the problem. This report provides a review of operating events involving these failure mechanisms. As a result of this review this report: (1) identifies conditions when the failure mechanisms have occurred, (2) identifies the spectrum of safety systems that have been subjected to the failure mechanisms, and (3) identifies conditions that may introduce the failure mechanisms under both normal and accident conditions. On the basis of the evaluation of the operating events, the Office for Analysis and Evaluation of Operational Data (AEOD) of the NRC concludes that the binding problems with gate valves are an important safety issue that needs priority NRC and industry attention. This report also provides AEOD's recommendation for actions to effectively prevent the occurrence of valve binding failures

IMPORTANCE OF LIQUIDITY ANALYSIS IN THE PROCESS OF FINANCIAL MANAGEMENT OF COMPANIES OPERATING IN THE TOURISM SECTOR IN SLOVAKIA: AN EMPIRICAL STUDY

Directory of Open Access Journals (Sweden)

Vladimir Hiadlovsky

2016-12-01

Full Text Available The article defines the financial analysis, with the emphasis on the liquidity analysis, as an essential tool of the corporate financial management process. The main objective of the article is, based on the statistical verification, to analyse liquidity of companies operating in the tourism sector, namely companies providing accommodation services, identify the key factors which influence the level and development of liquidity and therefore, when managed appropriately, may bring the improvement in liquidity management leading to the enhancement of the quality of the financial management process in companies and to their excellence. On the selected sample of companies operating in the tourism sector in Slovakia, the research results reveal the low long-term level of average current and total liquidity for the 2011 to 2014 period and indicate moderate to weak relationship between selected liquidity and profitability ratios. As liquidity is one of the areas reflecting one side of company's performance, its systematic and proper management may help companies achieve their goals on the way to excellence.

Identifying indicators of harmful and problem gambling in a Canadian sample through receiver operating characteristic analysis.

Science.gov (United States)

Quilty, Lena C; Avila Murati, Daniela; Bagby, R Michael

2014-03-01

Many gamblers would prefer to reduce gambling on their own rather than to adopt an abstinence approach within the context of a gambling treatment program. Yet responsible gambling guidelines lack quantifiable markers to guide gamblers in wagering safely. To address these issues, the current investigation implemented receiver operating characteristic (ROC) analysis to identify behavioral indicators of harmful and problem gambling. Gambling involvement was assessed in 503 participants (275 psychiatric outpatients and 228 community gamblers) with the Canadian Problem Gambling Index. Overall gambling frequency, duration, and expenditure were able to distinguish harmful and problematic gambling at a moderate level. Indicators of harmful gambling were generated for engagement in specific gambling activities: frequency of tickets and casino; duration of bingo, casino, and investments; and expenditures on bingo, casino, sports betting, games of skill, and investments. Indicators of problem gambling were similarly produced for frequency of tickets and casino, and expenditures on bingo, casino, games of skill, and investments. Logistic regression analyses revealed that overall gambling frequency uniquely predicted the presence of harmful and problem gambling. Furthermore, frequency indicators for tickets and casino uniquely predicted the presence of both harmful and problem gambling. Together, these findings contribute to the development of an empirically based method enabling the minimization of harmful or problem gambling through self-control rather than abstinence.

Physician Rating Websites: What Aspects Are Important to Identify a Good Doctor, and Are Patients Capable of Assessing Them? A Mixed-Methods Approach Including Physicians' and Health Care Consumers' Perspectives.

Science.gov (United States)

Rothenfluh, Fabia; Schulz, Peter J

2017-05-01

Physician rating websites (PRWs) offer health care consumers the opportunity to evaluate their doctor anonymously. However, physicians' professional training and experience create a vast knowledge gap in medical matters between physicians and patients. This raises ethical concerns about the relevance and significance of health care consumers' evaluation of physicians' performance. To identify the aspects physician rating websites should offer for evaluation, this study investigated the aspects of physicians and their practice relevant for identifying a good doctor, and whether health care consumers are capable of evaluating these aspects. In a first step, a Delphi study with physicians from 4 specializations was conducted, testing various indicators to identify a good physician. These indicators were theoretically derived from Donabedian, who classifies quality in health care into pillars of structure, process, and outcome. In a second step, a cross-sectional survey with health care consumers in Switzerland (N=211) was launched based on the indicators developed in the Delphi study. Participants were asked to rate the importance of these indicators to identify a good physician and whether they would feel capable to evaluate those aspects after the first visit to a physician. All indicators were ordered into a 4×4 grid based on evaluation and importance, as judged by the physicians and health care consumers. Agreement between the physicians and health care consumers was calculated applying Holsti's method. In the majority of aspects, physicians and health care consumers agreed on what facets of care were important and not important to identify a good physician and whether patients were able to evaluate them, yielding a level of agreement of 74.3%. The two parties agreed that the infrastructure, staff, organization, and interpersonal skills are both important for a good physician and can be evaluated by health care consumers. Technical skills of a doctor and outcomes

Treasury operations management

OpenAIRE

Laurențiu Dumitru ANDREI; Petre BREZEANU

2014-01-01

Amid the globalization and centralization of treasury operations, establishing the principles for their optimal management is the instrument by means of which economic stability, market dynamics and standards of living can be ensured. The directions of these principles, as well as their flexibility, depend on correctly identifying the objectives of the financial management planning of treasury operations, in compliance with European and international policies related to this area.

The relevance of operational skills towards business sustainability: A focus on SMME manufacturers in the Vaal triangle region

Directory of Open Access Journals (Sweden)

R. Naidoo

2010-12-01

Full Text Available Purpose: Activities in the manufacturing sector are often considered the bedrock of an economy and a key driver of growth and development. Within the South African manufacturing sector, operations skills are reported to be deficient and are often cited as a main cause of failure in small, medium and micro enterprises (SMMEs. This study explores and tests this fragile relationship between operations skills and SMME sustainability. Empirical investigations are conducted in a high-density SMME manufacturing environment - the Vaal Triangle Region. Design/Methodology/Approach: Building on previously established literature on SMME sustainability and operations skills, various measures are developed and tested for reliability and validity. Factor analysis is used to identify relevant factors in terms of operations skills. Co-relational analysis is then employed to test the hypothesised relationship. The study is cross-sectional in design and relies on trained fieldworkers administering surveys for data collection. Findings: Five clear factors for operations skills are identified through factor analysis with an overall high reliability value. Based on descriptive and co-relational analysis results reveal that operations skills are positively associated with sustainability. Implications: SMME owners, educators and service providers may benefit from the study's findings in terms of the nature and associations that operational skills have on developing sustainable SMME's. Originality/Value: The study focused on a neglected area of SMMEs - the importance of operations towards business sustainability, and made an important contribution towards theory development through empirical explorations. In South Africa, this is the first time an instrument measuring operations skills has been validated and associated with SMMEs in a manufacturing context.

Predicting operative blood loss during spinal fusion for adolescent idiopathic scoliosis.

Science.gov (United States)

Ialenti, Marc N; Lonner, Baron S; Verma, Kushagra; Dean, Laura; Valdevit, Antonio; Errico, Thomas

2013-06-01

Patient and surgical factors are known to influence operative blood loss in spinal fusion for adolescent idiopathic scoliosis (AIS), but have only been loosely identified. To date, there are no established recommendations to guide decisions to predonate autologous blood, and the current practice is based primarily on surgeon preference. This study is designed to determine which patient and surgical factors are correlated with, and predictive of, blood loss during spinal fusion for AIS. Retrospective analysis of 340 (81 males, 259 females; mean age, 15.2 y) consecutive AIS patients treated by a single surgeon from 2000 to 2008. Demographic (sex, age, height, weight, and associated comorbidities), laboratory (hematocrit, platelet, PT/PTT/INR), standard radiographic, and perioperative data including complications were analyzed with a linear stepwise regression to develop a predictive model of blood loss. Estimated blood loss was 907±775 mL for posterior spinal fusion (PSF, n=188), 323±171 mL for anterior spinal fusion (ASF, n=124), and 1277±821 mL for combined procedures (n=28). For patients undergoing PSF, stepwise analysis identified sex, preoperative kyphosis, and operative time to be the most important predictors of increased blood loss (Ploss in PSF: blood loss (mL)=C+Op-time (min)×(6.4)-pre-op T2-T12 kyphosis (degrees)×(8.7), C=233 if male and -270 if female. We find sex, operative time, and preoperative kyphosis to be the most important predictors of increased blood loss in PSF for AIS. Mean arterial pressure and operative time were predictive of estimated blood loss in ASF. For posterior fusions, we also present a model that estimates blood loss preoperatively and can be used to guide decisions regarding predonation of blood and the use of antifibrinolytic agents. Retrospective study: Level II.

Impact of Scatterometer Ocean Wind Vector Data on NOAA Operations

Science.gov (United States)

Jelenak, Z.; Chang, P.; Brennan, M. J.; Sienkiewicz, J. M.

2015-12-01

Near real-time measurements of ocean surface vector winds (OSVW), including both wind speed and direction from non-NOAA satellites, are being widely used in critical operational NOAA forecasting and warning activities. The scatterometer wind data data have had major operational impact in: a) determining wind warning areas for mid-latitude systems (gale, storm,hurricane force); b) determining tropical cyclone 34-knot and 50-knot wind radii. c) tracking the center location of tropical cyclones, including the initial identification of their formation. d) identifying and warning of extreme gap and jet wind events at all latitudes. e) identifying the current location of frontal systems and high and low pressure centers. f) improving coastal surf and swell forecasts Much has been learned about the importance and utility of satellite OSVW data in operational weather forecasting and warning by exploiting OSVW research satellites in near real-time. Since December 1999 when first data from QuikSCAT scatterometer became available in near real time NOAA operations have been benefiting from ASCAT scatterometer observations on MetOp-A and B, Indian OSCAT scatterometer on OceanSat-3 and lately NASA's RapidScat mission on International Space Station. With oceans comprising over 70 percent of the earth's surface, the impacts of these data have been tremendous in serving society's needs for weather and water information and in supporting the nation's commerce with information for safe, efficient, and environmentally sound transportation and coastal preparedness. The satellite OSVW experience that has been gained over the past decade by users in the operational weather community allows for realistic operational OSVW requirements to be properly stated for future missions. Successful model of transitioning research data into operation implemented by Ocean Winds Team in NOAA's NESDIS/STAR office and subsequent data impacts will be presented and discussed.

Benchmarks for enhanced network performance: hands-on testing of operating system solutions to identify the optimal application server platform for the Graduate School of Business and Public Policy

OpenAIRE

Burman, Rex; Coca, Anthony R.

2010-01-01

MBA Professional Report With the release of next generation operating systems, network managers face the prospect of upgrading their systems based on the assumption that "newer is better". The Graduate School of Business and Public Policy is in the process of upgrading their network application server and one of the most important decisions to be made is which Server Operating System to use. Based on hands-on benchmark tests and analysis we aim to assist the GSBPP by providing benchma...

Pre operational background radiation monitoring around Kudankulam Nuclear Power Project site - a decade long experience

International Nuclear Information System (INIS)

Vijayakumar, B.; George, Thomas; Sundara Rajan, P.; Selvi, B.S.; Balamurugan, M.; Pandit, G.G.; Ravi, P.M.; Tripathi, R.M.

2014-01-01

Pre-operational environmental background radiation monitoring around nuclear power plants is very important to understand baseline values existing in the site and also to identify any hot spots of naturally occurring high background radiation areas and their sources. These baseline measurements will act as a benchmark for future comparison after the reactors go into operation. The radiation measurements are continued during the operational phase of the plant and the results are compared to see whether there is any impact of the operation of the plant on the environment. A comprehensive background radiation monitoring plan has been in vogue at site from 2004 to meet this objective. This paper describes the different monitoring strategies adopted around Kudankulam Nuclear Power Project site and throws light on the pre operational background radiation levels in the environment

Effect of important operating parameters on product properties and operation of HDPE slurry reactor

International Nuclear Information System (INIS)

Soltanieh, M.; Remezani Saadat Abadi, A.; Dashti, A.; Mokhtari, J.

2007-01-01

In this article, a complete model for the mixed flow slurry reactor for polymerization of ethylene to high density polyethylene in the presence of Ziegler-Natta catalyst is presented. In addition to the effects of the multiple active sites, the effect of other important parameters such as the catalyst concentration, co-catalyst, hydrogen, monomer, impurities and pressure on the mass-average and number-average polymer product chain length, the average product distribution index and the required residence time for the reactor were investigated. The simulation results show that as the catalyst, hydrogen and solvent concentrations increase, the mass and number-average polymer chain length decrease, whereas with increasing monomer concentration and pressure, the average molecular weight increases. The effects of these parameters on the polydispersity index and residence time do not follow the same trend and their relationship changes in some of these variables

The SSAC (State System of Accounting and Control) of Argentina: possible areas to increase co-operation with ABACC and IAEA

International Nuclear Information System (INIS)

Castro, Laura B.; Vicens, Hugo E.; Maceiras, Elena; Saavedra, Analia D.; Valentino, Lucia I.; Llacer, Carlos D.; Mairal, Maria L.; Fernandez Moreno, Sonia

2000-01-01

This paper deals with one of the measures identified in the program 93+2 to enhance international safeguards effectiveness and efficiency. This measure is related to increase co-operation between the IAEA and the SSAC in the implementation of safeguards. It is recognized that an effective SSAC could contribute to better safeguards. During the discussion to strengthen the safeguards system different levels of co-operation between the IAEA and SSAC were identified, depending on their features and capabilities. To start assessing the possibility of increasing this co-operation, a 'SSAC Questionnaire' was submitted by the IAEA to Member States, EURATOM and ABACC. At present, those questionnaires are being assessed by the IAEA in order to identify areas for further co-operation. One important aspect is the increased co-operation level that might be achieved when the Additional Protocol becomes an integral part of the safeguard agreements. Another one refers to the methodology that IAEA might employ to audit the quality and performance of the SSAC regarding the different levels of such co-operation. This paper will also describe the features of the SSAC of Argentina emphasizing its capabilities and the various areas that might be considered to increase further co-operation with ABACC and the IAEA. (author)

Analysis of remote operating systems for space-based servicing operations, volume 1

Science.gov (United States)

1985-01-01

A two phase study was conducted to analyze and develop the requirements for remote operating systems as applied to space based operations for the servicing, maintenance, and repair of satellites. Phase one consisted of the development of servicing requirements to establish design criteria for remote operating systems. Phase two defined preferred system concepts and development plans which met the requirements established in phase one. The specific tasks in phase two were to: (1) identify desirable operational and conceptual approaches for selected mission scenarios; (2) examine the potential impact of remote operating systems incorporated into the design of the space station; (3) address remote operating systems design issues, such as mobility, which are effected by the space station configuration; and (4) define the programmatic approaches for technology development, testing, simulation, and flight demonstration.

Operational risk and e-banking

Directory of Open Access Journals (Sweden)

Şerbu, R.

2010-12-01

Full Text Available Banking involves a variety of risks. Under Basel II, the main risks are the monitored credit risk, market risk and operational risk. Frequently, operational risks are underestimated, considering that they would not affect the optimal activity of a bank. However, past experience of some credit institutions have shown that operational risk is an important cause of financial losses in the banking sector. Operational risk is generated by a complex of factors that manifests primarily as a result of direct customer interaction with the credit institution. In this context, the provision of e-banking services reduces direct contact with bank customers and thus reduces potential losses arising from operational risk. In sum, we consider it necessary to be aware of the link between operational risk and e-banking services promoted by banks and of the importance of this connection especially in a financial environment affected by the financial crisis.

OSART Guidelines. 2015 Edition. Reference Report for IAEA Operational Safety Review Teams (OSARTs)

International Nuclear Information System (INIS)

2016-01-01

The IAEA works to provide a global nuclear safety and security framework for the protection of people and the environment from the effects of ionizing radiation, the minimization of the likelihood of accidents that could endanger life and property, and effective mitigation of the effects of any such events, should they occur. The strategic approach to achieving such a framework involves continual improvement in four areas: national and international safety infrastructures; the establishment and global acceptance of IAEA safety standards; an integrated approach to the provision for the application of the safety standards; and a global network of knowledge and experience. The IAEA Operational Safety Review Team (OSART) programme provides advice and assistance to Member States to enhance the safety of nuclear power plants during commissioning and operation. The OSART programme, initiated in 1982, is available to all Member States with nuclear power plants under commissioning or in operation. Conservative design, careful manufacture and sound construction are all prerequisites for the safe operation of nuclear power plants. However, the safety of the plant also depends ultimately on: sound management, policies, procedures, processes and practices; the capability and reliability of commissioning and operating personnel; comprehensive instructions; sound accident management and emergency preparedness; and adequate resources. Finally, a positive attitude and conscientiousness on the part of all staff in discharging their responsibilities is important to safety. The OSART programme is based on the safety standards applicable to nuclear power plants. IAEA safety standards reflect the consensus of Member States on nuclear safety matters. The reports of the International Nuclear Safety Group identify important current nuclear safety issues and also serve as references during an OSART review. The publication OSART Guidelines provides overall guidance on the conduct of OSART

Import of metal scrap - risks associated with radioactivity

International Nuclear Information System (INIS)

Elert, M.

1992-11-01

There is a growing concern in Sweden for the possibility that imported metal scrap is radioactive. The recent political and economical changes in eastern Europe and the increased cooperation with the CEC has affected Swedens import. In the last years, the import of metal scrap from the former USSR has increased considerably. In view of recent incidents, when radioactive materials have been found, the Swedish Radiation Protection Institute has detected a need for identifying the potential risk sources and evaluating the magnitude of the risk associated with the import of metal scrap. The purpose of this report is to provide some background material concerning import statistics, use of metal scrap in Sweden and to identify potential sources of radioactive metal scrap. In addition, the radionuclides of most concern has been identified and the possibility of detecting them in metal scrap shipments is analyzed

Impact of staffing parameters on operational reliability

International Nuclear Information System (INIS)

Hahn, H.A.; Houghton, F.K.

1993-01-01

This paper reports on a project related to human resource management of the Department of Energy's (DOE's) High-Level Waste (HLW) Tank program. Safety and reliability of waste tank operations is impacted by several issues, including not only the design of the tanks themselves, but also how operations and operational personnel are managed. As demonstrated by management assessments performed by the Tiger Teams, DOE believes that the effective use of human resources impacts environment safety, and health concerns. For the of the current paper, human resource management activities are identified as ''Staffing'' and include the of developing the functional responsibilities and qualifications of technical and administrative personnel. This paper discusses the importance of staff plans and management in the overall view of safety and reliability. The work activities and procedures associated with the project, a review of the results of these activities, including a summary of the literature and a preliminary analysis of the data. We conclude that although identification of staffing issues and the development of staffing plans contributes to the overall reliability and safety of the HLW tanks, the relationship is not well understood and is in need of further development

Impact of staffing parameters on operational reliability

International Nuclear Information System (INIS)

Hahn, H.A.; Houghton, F.K.

1993-01-01

This paper reports on a project related to human resource management of the Department of Energy (DOEs) High-Level Waste (HLW) Tank program. Safety and reliability of waste tank operations is impacted by several issues, including not only the design of the tanks themselves, but also how operations and operational personnel are managed. As demonstrated by management assessments performed by the Tiger Teams, DOE believes that the effective use of human resources impacts environment, safety, and health concerns. For the purposes of the current paper, human resource management activities are identified as 'Staffing' and include the process of developing the functional responsibilities and qualifications of technical and administrative personnel. This paper discusses the importance of staff plans and management in the overall view of safety and reliability, the work activities and procedures associated with the project, a review of the results of these activities, including a summary of the literature and a preliminary analysis of the data. We conclude that, although identification of staffing issues and the development of staffing plans contributes to the overall reliability and safety of the HLW tanks, the relationship is not well understood and is in need of further development

DTI measures identify mild and moderate TBI cases among patients with complex health problems: A receiver operating characteristic analysis of U.S. veterans.

Science.gov (United States)

Main, Keith L; Soman, Salil; Pestilli, Franco; Furst, Ansgar; Noda, Art; Hernandez, Beatriz; Kong, Jennifer; Cheng, Jauhtai; Fairchild, Jennifer K; Taylor, Joy; Yesavage, Jerome; Wesson Ashford, J; Kraemer, Helena; Adamson, Maheen M

2017-01-01

Standard MRI methods are often inadequate for identifying mild traumatic brain injury (TBI). Advances in diffusion tensor imaging now provide potential biomarkers of TBI among white matter fascicles (tracts). However, it is still unclear which tracts are most pertinent to TBI diagnosis. This study ranked fiber tracts on their ability to discriminate patients with and without TBI. We acquired diffusion tensor imaging data from military veterans admitted to a polytrauma clinic (Overall n  = 109; Age: M  = 47.2, SD  = 11.3; Male: 88%; TBI: 67%). TBI diagnosis was based on self-report and neurological examination. Fiber tractography analysis produced 20 fiber tracts per patient. Each tract yielded four clinically relevant measures (fractional anisotropy, mean diffusivity, radial diffusivity, and axial diffusivity). We applied receiver operating characteristic (ROC) analyses to identify the most diagnostic tract for each measure. The analyses produced an optimal cutpoint for each tract. We then used kappa coefficients to rate the agreement of each cutpoint with the neurologist's diagnosis. The tract with the highest kappa was most diagnostic. As a check on the ROC results, we performed a stepwise logistic regression on each measure using all 20 tracts as predictors. We also bootstrapped the ROC analyses to compute the 95% confidence intervals for sensitivity, specificity, and the highest kappa coefficients. The ROC analyses identified two fiber tracts as most diagnostic of TBI: the left cingulum (LCG) and the left inferior fronto-occipital fasciculus (LIF). Like ROC, logistic regression identified LCG as most predictive for the FA measure but identified the right anterior thalamic tract (RAT) for the MD, RD, and AD measures. These findings are potentially relevant to the development of TBI biomarkers. Our methods also demonstrate how ROC analysis may be used to identify clinically relevant variables in the TBI population.

New tracers identify hydraulic fracturing fluids and accidental releases from oil and gas operations.

Science.gov (United States)

Warner, N R; Darrah, T H; Jackson, R B; Millot, R; Kloppmann, W; Vengosh, A

2014-11-04

Identifying the geochemical fingerprints of fluids that return to the surface after high volume hydraulic fracturing of unconventional oil and gas reservoirs has important applications for assessing hydrocarbon resource recovery, environmental impacts, and wastewater treatment and disposal. Here, we report for the first time, novel diagnostic elemental and isotopic signatures (B/Cl, Li/Cl, δ11B, and δ7Li) useful for characterizing hydraulic fracturing flowback fluids (HFFF) and distinguishing sources of HFFF in the environment. Data from 39 HFFFs and produced water samples show that B/Cl (>0.001), Li/Cl (>0.002), δ11B (25-31‰) and δ7Li (6-10‰) compositions of HFFF from the Marcellus and Fayetteville black shale formations were distinct in most cases from produced waters sampled from conventional oil and gas wells. We posit that boron isotope geochemistry can be used to quantify small fractions (∼0.1%) of HFFF in contaminated fresh water and likely be applied universally to trace HFFF in other basins. The novel environmental application of this diagnostic isotopic tool is validated by examining the composition of effluent discharge from an oil and gas brine treatment facility in Pennsylvania and an accidental spill site in West Virginia. We hypothesize that the boron and lithium are mobilized from exchangeable sites on clay minerals in the shale formations during the hydraulic fracturing process, resulting in the relative enrichment of boron and lithium in HFFF.

Quality Improvement in Hospitals: Identifying and Understanding Behaviors

Directory of Open Access Journals (Sweden)

Lukasz M. Mazur

2012-01-01

Full Text Available Improving operational performance in hospitals is complicated, particularly if process improvement requires complex behavioral changes. Using single-loop and double-loop learning theory as a foundation, the purpose of this research is to empirically uncover key improvement behaviors and the factors that may be associated with such behaviors in hospitals. A two-phased approach was taken to collect data regarding improvement behaviors and associated factors, and data analysis was conducted using methods proposed by grounded theorists. The contributions of this research are twofold. First, five key behaviors related to process improvement are identified, namely Quick Fixing, Initiating, Conforming, Expediting, and Enhancing. Second, based on these observed behaviors, a set of force field diagrams is developed to structure and organize possible factors that are important to consider when attempting to change improvement behaviors. This begins to fill the gap in the knowledge about what factors drive effective improvement efforts in hospital settings.

Safety culture management: The importance of organizational factors

International Nuclear Information System (INIS)

Haber, S.B.; Shurberg, D.A.; Jacobs, R.; Hofmann, D.

1995-01-01

The concept of safety culture has been used extensively to explain the underlying causes of performance based events, both positive and negative, across the nuclear industry. The work described in this paper represents several years of effort to identify, define and assess the organizational factors important to safe performance in nuclear power plants (NPPs). The research discussed in this paper is primarily conducted in support of the US Nuclear Regulatory Commission's (NRC) efforts in understanding the impact of organizational performance on safety. As a result of a series of research activities undertaken by numerous NRC contractors, a collection of organizational dimensions has been identified and defined. These dimensions represent what is believed to be a comprehensive taxonomy of organizational elements that relate to the safe operation of nuclear power plants. Techniques were also developed by which to measure these organizational dimensions, and include structured interview protocols, behavioral checklists, and behavioral anchored rating scales (BARS). Recent efforts have focused on devising a methodology for the extraction of information related to the identified organizational dimensions from existing NRC documentation. This type of effort would assess the applicability of the organizational dimensions to existing NRC inspection and evaluation reports, refine the organizational dimensions previously developed so they are more relevant to the task of retrospective analysis, and attempt to rate plants based on the review of existing NRC documentation using the techniques previously developed for the assessment of organizational dimensions

Importance Sampling for Stochastic Timed Automata

DEFF Research Database (Denmark)

Jegourel, Cyrille; Larsen, Kim Guldstrand; Legay, Axel

2016-01-01

We present an importance sampling framework that combines symbolic analysis and simulation to estimate the probability of rare reachability properties in stochastic timed automata. By means of symbolic exploration, our framework first identifies states that cannot reach the goal. A state-wise cha......We present an importance sampling framework that combines symbolic analysis and simulation to estimate the probability of rare reachability properties in stochastic timed automata. By means of symbolic exploration, our framework first identifies states that cannot reach the goal. A state...

Collecting and identifying the radioactive waste

International Nuclear Information System (INIS)

Dogaru, C. GH.

2001-01-01

The procedure 'Collecting and identifying the radioactive waste' applied by the Radioactive Waste Management Department, STDR, complies with the requirements of the competent authority concerning the radioactive source management. One of the most important tasks, requiring the application of this procedure, is collecting and identification of 'historical wastes' for which a complete book keeping does not exist from different reasons. The chapter 1 presents the procedure's goal and the chapter 2 defines the applicability field. Chapter 3 enlists the reference documents while the chapter 4 gives the definitions and abbreviations used in the procedure. Chapter 5 defines responsibilities of the operators implied in collecting, identification and characterization of the radioactive wastes, the producers of the radioactive wastes being implied. Chapter 6 gives the preliminary conditions for applying the procedure. Among these, the transport, collecting, processing, storing and characterization costs are implied, as well as the compliance with technical and different other condition. The procedure structure is presented in the chapter 7. In collecting radioactive wastes, two situations are possible: 1- the producer is able to prepare the wastes for transport and to deliver them to STDR; 2 - the wastes are received from the producer by a delegate STDR operator, properly and technically prepared. The producer must demonstrate by documents the origin and possession, analysis bulletins specifying, the radionuclides activity and measurement date, physical state and, in addition, for spent radiation sources, the series/number of the container and producer. In case the producer is not able to display all this information, the wastes are taken into custody by the STDR labs in view of their analysis. A record in writing is completed specifying the transfer of radioactive wastes from the producer to the STDR, a record which is sent to the national authority in charge with the

Identifying organizational deficiencies through root-cause analysis

International Nuclear Information System (INIS)

Tuli, R.W.; Apostolakis, G.E.

1996-01-01

All nuclear power plants incorporate root-cause analysis as an instrument to help identify and isolate key factors judged to be of significance following an incident or accident. Identifying the principal deficiencies can become very difficult when the event involves not only human and machine interaction, but possibly the underlying safety and quality culture of the organization. The current state of root-cause analysis is to conclude the investigation after identifying human and/or hardware failures. In this work, root-cause analysis is taken one step further by examining plant work processes and organizational factors. This extension is considered significant to the success of the analysis, especially when management deficiency is believed to contribute to the incident. The results of root-cause analysis can be most effectively implemented if the organization, as a whole, wishes to improve the overall operation of the plant by preventing similar incidents from occurring again. The study adds to the existing root-cause analysis the ability to localize the causes of undesirable events and to focus on those problems hidden deeply within the work processes that are routinely followed in the operation and maintenance of the facility

Psychological factors of professional success of nuclear power plant main control room operators

Directory of Open Access Journals (Sweden)

Kosenkov A.A.

2014-12-01

Full Text Available Aim: to conduct a comparative analysis of the psychological characteristics of the most and least successful main control room operators. Material and Methods. Two NPP staff groups: the most and least successful main control room operators, who worked in routine operating conditions, were surveyed. Expert evaluation method has been applied to identify the groups. The subjects were administered the Minnesota Multiphasic Personality Inventory (MMPI, Cattell's Sixteen Personality Factor Questionnaire (16PF form A and Raven's Progressive Matrices test. Results. Numerous significant psychological differences between the groups of most and least successful control room operators were obtained: the best operators were significantly more introverted and correctly solved more logical tasks with smaller percentage of mistakes under time pressure than worst ones. Conclusions: 1. The psychodiagnostic methods used in the study were adequate to meet research objective 2. Tendency to introversion, as well as developed the ability to solve logic problems undertime pressure, apparently, are important professional qualities for control room operators. These indicators should be considered in the process of psychological selection and professional guidance of nuclear power plant operators.

Industry Operating Experience Process at Krsko NPP

International Nuclear Information System (INIS)

Bach, B.; Bozin, B.; Cizmek, R.

2012-01-01

Experience has shown that number of minor events and near misses, usually without immediate or significant impact to plant safety and reliability, are precursors of significant or severe events due to the same or similar root or apparent cause(s). It is therefore desirable to identify and analyze weaknesses of the precursor problems (events) in order to prevent occurrence of significant events. Theoretically, significant events could be prevented from occurring if the root cause(s) of these precursor problems could be identified and eliminated. The Operating Experience Program identifies such event precursors and by reporting them to the industry, plant specific corrective actions can be taken to prevent events at other operational plants. The intent of the Operating Experience Program is therefore to improve nuclear power plant safety and reliability of the operating nuclear power plants. Each plant develops its own Operating Experience Program in order to learn from the in-house operating experience as well as from the world community of nuclear plants. The effective use of operating experience includes analyzing both plant and industry events in order to identify fundamental weaknesses and then determining appropriate plant-specific actions that will minimize the likelihood of similar events. Learning and applying the lessons from operating experience is an integral part of station safety culture and is encouraged by managers throughout the top plant administrative programs and procedures. Krsko NPP is developed it own Operating Experience Program by using the most relevant INPO/WANO/IAEA guidelines as well as its own knowledge, skills an operating practice. The Operating Experience Program is a part of the Corrective Action Program, which is among top management programs, thus program is strongly encouraged by top management. The purpose of Operating Experience Program is to provide guidance for using, sharing, and evaluating operating experience information

Why operators fail licensing examinations

International Nuclear Information System (INIS)

Roth, D.R.; Zerbo, J.N.

1975-01-01

A survey was conducted among nuclear utility operators who have taken NRC licensing examinations to determine which factors they considered important in their success or failure. The operators also compared the actual NRC examination with their expectations prior to taking the examination. The results of the survey supplement NRC statistics with regard to failure rates. Over 350 operators and 20 utilities participated in the survey and a good cross section of the nuclear community is represented. Reactor theory and emergency procedures are important areas in which operators found NRC emphasis to be different than expected. Observation Training and Design Lecture Series are two training segments which appear to require improvement. Recommendations are made for the use of data collected through this survey and for continuation of the effort to give operators a mechanism of supplying feedback to the training and licensing process

Gene Expression Profiling Identifies Important Genes Affected by R2 Compound Disrupting FAK and P53 Complex

International Nuclear Information System (INIS)

Golubovskaya, Vita M.; Ho, Baotran; Conroy, Jeffrey; Liu, Song; Wang, Dan; Cance, William G.

2014-01-01

Focal Adhesion Kinase (FAK) is a non-receptor kinase that plays an important role in many cellular processes: adhesion, proliferation, invasion, angiogenesis, metastasis and survival. Recently, we have shown that Roslin 2 or R2 (1-benzyl-15,3,5,7-tetraazatricyclo[3.3.1.1~3,7~]decane) compound disrupts FAK and p53 proteins, activates p53 transcriptional activity, and blocks tumor growth. In this report we performed a microarray gene expression analysis of R2-treated HCT116 p53 +/+ and p53 −/− cells and detected 1484 genes that were significantly up- or down-regulated (p < 0.05) in HCT116 p53 +/+ cells but not in p53 −/− cells. Among up-regulated genes in HCT p53 +/+ cells we detected critical p53 targets: Mdm-2, Noxa-1, and RIP1. Among down-regulated genes, Met, PLK2, KIF14, BIRC2 and other genes were identified. In addition, a combination of R2 compound with M13 compound that disrupts FAK and Mmd-2 complex or R2 and Nutlin-1 that disrupts Mdm-2 and p53 decreased clonogenicity of HCT116 p53 +/+ colon cancer cells more significantly than each agent alone in a p53-dependent manner. Thus, the report detects gene expression profile in response to R2 treatment and demonstrates that the combination of drugs targeting FAK, Mdm-2, and p53 can be a novel therapy approach

Identifying gaps in the surgical training curriculum in Rwanda through evaluation of operative activity at a teaching hospital.

Science.gov (United States)

Rickard, Jennifer L; Ntakiyiruta, Georges; Chu, Kathryn M

2015-01-01

To define the operations performed by surgical residents at a tertiary referral hospital in Rwanda to help guide development of the residency program. Cross-sectional study of all patients operated by surgical residents from October 2012 to September 2013. University Teaching Hospital of Kigali (Centre Hospitalier Universitaire de Kigali [CHUK]), a public, tertiary referral hospital in Kigali, Rwanda. All patient data were entered into the operative database by surgical residents at CHUK. A total of 2833 cases were entered into the surgical database. Of them, 53 cases were excluded from further analysis because no surgical resident was listed as the primary or assistant surgeon, leaving 2780 cases for analysis. There were 2780 operations involving surgical residents. Of them, 51% of procedures were classified under general surgery, 38% orthopedics, 7% neurosurgery, and 4% urology. Emergency operations accounted for 64% of the procedures, with 56% of those being general surgery and 35% orthopedic. Further, 50% of all operations were trauma, with 71% of those orthopedic and 21% general surgery. Surgical faculty were involved in 45% of operations as either the primary or the assistant surgeons, while the remainder of operations did not involve surgical faculty. Residents were primary surgeons in 68% of procedures and assistant surgeons in 84% of procedures. The operative experience of surgery residents at CHUK primarily involves emergency and trauma procedures. Although this likely reflects the demographics of surgical care within Rwanda, more focus should be placed on elective procedures to ensure that surgical residents are broadly trained. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Logistics aspects of petroleum pipeline operations

Directory of Open Access Journals (Sweden)

W. J. Pienaar

2010-11-01

Full Text Available The paper identifies, assesses and describes the logistics aspects of the commercial operation of petroleum pipelines. The nature of petroleum-product supply chains, in which pipelines play a role, is outlined and the types of petroleum pipeline systems are described. An outline is presented of the nature of the logistics activities of petroleum pipeline operations. The reasons for the cost efficiency of petroleum pipeline operations are given. The relative modal service effectiveness of petroleum pipeline transport, based on the most pertinent service performance measures, is offered. The segments in the petroleum-products supply chain where pipelines can play an efficient and effective role are identified.

Evaluation of bentonite alteration due to interactions with iron. Sensitivity analyses to identify the important factors for the bentonite alteration

International Nuclear Information System (INIS)

Sasamoto, Hiroshi; Wilson, James; Sato, Tsutomu

2013-01-01

Performance assessment of geological disposal systems for high-level radioactive waste requires a consideration of long-term systems behaviour. It is possible that the alteration of swelling clay present in bentonite buffers might have an impact on buffer functions. In the present study, iron (as a candidate overpack material)-bentonite (I-B) interactions were evaluated as the main buffer alteration scenario. Existing knowledge on alteration of bentonite during I-B interactions was first reviewed, then the evaluation methodology was developed considering modeling techniques previously used overseas. A conceptual model for smectite alteration during I-B interactions was produced. The following reactions and processes were selected: 1) release of Fe 2+ due to overpack corrosion; 2) diffusion of Fe 2+ in compacted bentonite; 3) sorption of Fe 2+ on smectite edge and ion exchange in interlayers; 4) dissolution of primary phases and formation of alteration products. Sensitivity analyses were performed to identify the most important factors for the alteration of bentonite by I-B interactions. (author)

Agreement between pre-operative and intra-operative bacteriological samples in 85 chronic peri-prosthetic infections.

Science.gov (United States)

Matter-Parrat, V; Ronde-Oustau, C; Boéri, C; Gaudias, J; Jenny, J-Y

2017-04-01

Whether pre-operative microbiological sampling contributes to the management of chronic peri-prosthetic infection remains controversial. We assessed agreement between the results of pre-operative and intra-operative samples in patients undergoing single-stage prosthesis exchange to treat chronic peri-prosthetic infection. Agreement between pre-operative and intra-operative samples exceeds 75% in patients undergoing single-stage exchange of a hip or knee prosthesis to treat chronic peri-prosthetic infection. This single-centre retrospective study included 85 single-stage prosthesis exchange procedures in 82 patients with chronic peri-prosthetic infection at the hip or knee. Agreement between pre-operative and intra-operative sample results was evaluated. Changes to the initial antibiotic regimen made based on the intra-operative sample results were recorded. Of 149 pre-operative samples, 109 yielded positive cultures, in 75/85 cases. Of 452 intra-operative samples, 354 yielded positive cultures, in 85/85 cases. Agreement was complete in 54 (63%) cases and partial in 9 (11%) cases; there was no agreement in the remaining 22 (26%) cases. The complete agreement rate was significantly lower than 75% (P=0.01). The initial antibiotic regimen was inadequate in a single case. Pre-operative sampling may contribute to the diagnosis of peri-prosthetic infection but is neither necessary nor sufficient to confirm the diagnosis and identify the causative agent. The spectrum of the initial antibiotic regimen cannot be safely narrowed based on the pre-operative sample results. We suggest the routine prescription of a probabilistic broad-spectrum antibiotic regimen immediately after the prosthesis exchange, even when a pathogen was identified before surgery. IV, retrospective study. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Human-Capital based Governance Structure, Success Factors and Barriers to Effective Governance: Co-operatives in Malaysia

Directory of Open Access Journals (Sweden)

Rohana Othman

2016-01-01

Full Text Available Co-operatives comprise the crucial third engine of growth for the Malaysian economy after the public and private sectors. This study investigates the human capital based governance structure, success factors and barriers to effective governance of co-operatives in Malaysia. Questionnaires were distributed to the top 100 co-operatives listed in the Malaysian Co-operative Societies Commission website. Analysis of the responses to the questionnaires showed that human capital based co-operatives governance comprise members’ participation, independence of the board, depth of expertise and competencies of directors and other characteristics of the board. This study also identified branding as the most important success factor ahead of competitiveness and proximity. Malaysia’s economy is projected to continue relying significantly on the performance of co-operatives. Thus, it is incumbent for greater attention to be given towards an effective governance that results in successful co-operatives.

Operating room teamwork among physicians and nurses: teamwork in the eye of the beholder.

Science.gov (United States)

Makary, Martin A; Sexton, J Bryan; Freischlag, Julie A; Holzmueller, Christine G; Millman, E Anne; Rowen, Lisa; Pronovost, Peter J

2006-05-01

Teamwork is an important component of patient safety. In fact, communication errors are the most common cause of sentinel events and wrong-site operations in the US. Although efforts to improve patient safety through improving teamwork are growing, there is no validated tool to scientifically measure teamwork in the surgical setting. Operating room personnel in 60 hospitals were surveyed using the Safety Attitudes Questionnaire. Surgeons, anesthesiologists, certified registered nurse anesthetists, and operating room nurses rated their own peers and each other using a 5-point Likert scale (1 = very low, 5 = very high). Overall response rate was 77.1% (2,135 of 2,769). Ratings of teamwork differed substantially by operating room caregiver type, with the greatest differences in ratings shown by physicians: surgeons (F[4, 2058] = 41.73, p teamwork exist in the operating room, with physicians rating the teamwork of others as good, but at the same time, nurses perceive teamwork as mediocre. Given the importance of communication and collaboration in patient safety, health care organizations should measure teamwork using a scientifically valid method. The Safety Attitudes Questionnaire can be used to measure teamwork, identify disconnects between or within disciplines, and evaluate interventions aimed at improving patient safety.

ANALYSIS AND OPERATING LEVERAGE RELATIONSHIP WITH THE OPERATIONAL RISK CUBAN ENTERPRISES

Directory of Open Access Journals (Sweden)

María E. González-del Foyo

2016-01-01

Full Text Available The analysis of the equilibrium point is important in the planning process, because the relation costvolume-benefit may become significantly influenced by the investment of the company in fixed assets, and the changes in the ratio of fixed assets in relation to variable assets are determined at the moment, that the finantial plans are established. Together with the analysis of the equilibrium point, the degree of leverage is calculated and interpreted and its implicatiosn for the operative risk of an company is studied. The study of the degree of leverage and its interpretation from the operative risk point of view to which an company thats operate in different conditions and economies is faced, with is the basic objetive of the present paper and is of the highest importance for the decision taking of the management, being this a phenomenon present in all economic organizations. 

A fast algorithm for identifying friends-of-friends halos

Science.gov (United States)

Feng, Y.; Modi, C.

2017-07-01

We describe a simple and fast algorithm for identifying friends-of-friends features and prove its correctness. The algorithm avoids unnecessary expensive neighbor queries, uses minimal memory overhead, and rejects slowdown in high over-density regions. We define our algorithm formally based on pair enumeration, a problem that has been heavily studied in fast 2-point correlation codes and our reference implementation employs a dual KD-tree correlation function code. We construct features in a hierarchical tree structure, and use a splay operation to reduce the average cost of identifying the root of a feature from O [ log L ] to O [ 1 ] (L is the size of a feature) without additional memory costs. This reduces the overall time complexity of merging trees from O [ L log L ] to O [ L ] , reducing the number of operations per splay by orders of magnitude. We next introduce a pruning operation that skips merge operations between two fully self-connected KD-tree nodes. This improves the robustness of the algorithm, reducing the number of merge operations in high density peaks from O [δ2 ] to O [ δ ] . We show that for cosmological data set the algorithm eliminates more than half of merge operations for typically used linking lengths b ∼ 0 . 2 (relative to mean separation). Furthermore, our algorithm is extremely simple and easy to implement on top of an existing pair enumeration code, reusing the optimization effort that has been invested in fast correlation function codes.

Linking the salt transcriptome with physiological responses of a salt-resistant Populus species as a strategy to identify genes important for stress acclimation.

Science.gov (United States)

Brinker, Monika; Brosché, Mikael; Vinocur, Basia; Abo-Ogiala, Atef; Fayyaz, Payam; Janz, Dennis; Ottow, Eric A; Cullmann, Andreas D; Saborowski, Joachim; Kangasjärvi, Jaakko; Altman, Arie; Polle, Andrea

2010-12-01

To investigate early salt acclimation mechanisms in a salt-tolerant poplar species (Populus euphratica), the kinetics of molecular, metabolic, and physiological changes during a 24-h salt exposure were measured. Three distinct phases of salt stress were identified by analyses of the osmotic pressure and the shoot water potential: dehydration, salt accumulation, and osmotic restoration associated with ionic stress. The duration and intensity of these phases differed between leaves and roots. Transcriptome analysis using P. euphratica-specific microarrays revealed clusters of coexpressed genes in these phases, with only 3% overlapping salt-responsive genes in leaves and roots. Acclimation of cellular metabolism to high salt concentrations involved remodeling of amino acid and protein biosynthesis and increased expression of molecular chaperones (dehydrins, osmotin). Leaves suffered initially from dehydration, which resulted in changes in transcript levels of mitochondrial and photosynthetic genes, indicating adjustment of energy metabolism. Initially, decreases in stress-related genes were found, whereas increases occurred only when leaves had restored the osmotic balance by salt accumulation. Comparative in silico analysis of the poplar stress regulon with Arabidopsis (Arabidopsis thaliana) orthologs was used as a strategy to reduce the number of candidate genes for functional analysis. Analysis of Arabidopsis knockout lines identified a lipocalin-like gene (AtTIL) and a gene encoding a protein with previously unknown functions (AtSIS) to play roles in salt tolerance. In conclusion, by dissecting the stress transcriptome of tolerant species, novel genes important for salt endurance can be identified.

Finding Important Terms for Patients in Their Electronic Health Records: A Learning-to-Rank Approach Using Expert Annotations

Science.gov (United States)

Zheng, Jiaping; Yu, Hong

2016-01-01

Background Many health organizations allow patients to access their own electronic health record (EHR) notes through online patient portals as a way to enhance patient-centered care. However, EHR notes are typically long and contain abundant medical jargon that can be difficult for patients to understand. In addition, many medical terms in patients’ notes are not directly related to their health care needs. One way to help patients better comprehend their own notes is to reduce information overload and help them focus on medical terms that matter most to them. Interventions can then be developed by giving them targeted education to improve their EHR comprehension and the quality of care. Objective We aimed to develop a supervised natural language processing (NLP) system called Finding impOrtant medical Concepts most Useful to patientS (FOCUS) that automatically identifies and ranks medical terms in EHR notes based on their importance to the patients. Methods First, we built an expert-annotated corpus. For each EHR note, 2 physicians independently identified medical terms important to the patient. Using the physicians’ agreement as the gold standard, we developed and evaluated FOCUS. FOCUS first identifies candidate terms from each EHR note using MetaMap and then ranks the terms using a support vector machine-based learn-to-rank algorithm. We explored rich learning features, including distributed word representation, Unified Medical Language System semantic type, topic features, and features derived from consumer health vocabulary. We compared FOCUS with 2 strong baseline NLP systems. Results Physicians annotated 90 EHR notes and identified a mean of 9 (SD 5) important terms per note. The Cohen’s kappa annotation agreement was .51. The 10-fold cross-validation results show that FOCUS achieved an area under the receiver operating characteristic curve (AUC-ROC) of 0.940 for ranking candidate terms from EHR notes to identify important terms. When including term

High-Performance Operating Systems

DEFF Research Database (Denmark)

Sharp, Robin

1999-01-01

Notes prepared for the DTU course 49421 "High Performance Operating Systems". The notes deal with quantitative and qualitative techniques for use in the design and evaluation of operating systems in computer systems for which performance is an important parameter, such as real-time applications......, communication systems and multimedia systems....

Technical requirements on knowledge base and instrumentation system for decision making in plant operation and maintenance

International Nuclear Information System (INIS)

Kitamura, Masaharu; Yoshikawa, Shinji; Hasegawa, Makoto

1998-03-01

A series of technical surveys and studies are described in this report to examine and identify technical requirements to be posed on knowledge base and instrumentation system as the fundamental in high reliability computational decision making in operation and maintenance of nuclear power plants. Monitoring and diagnosis are focused as the important tasks among the operation/maintenance-related tasks. A concrete monitoring and diagnosis system configuration has been proposed consisting of distributed symptom database and of on-demand measurement subsystem. An prototype of the proposed system configuration has been successfully verified. (author)

Operator interface design considerations for a PACS information management system

Science.gov (United States)

Steinke, James E.; Nabijee, Kamal H.; Freeman, Rick H.; Prior, Fred W.

1990-08-01

As prototype PACS grow into fully digital departmental and hospital-wide systems, effective information storage and retrieval mechanisms become increasingly important. Thus far, designers of PACS workstations have concentrated on image communication and display functionality. The new challenge is to provide appropriate operator interface environments to facilitate information retrieval. The "Marburg Model" 1 provides a detailed analysis of the functions, control flows and data structures used in Radiology. It identifies a set of "actors" who perform information manipulation functions. Drawing on this model and its associated methodology it is possible to identify four modes of use of information systems in Radiology: Clinical Routine, Research, Consultation, and Administration. Each mode has its own specific access requirements and views of information. An operator interface strategy appropriate for each mode will be proposed. Clinical Routine mode is the principal concern of PACS primary diagnosis workstations. In a full PACS implementation, such workstations must provide a simple and consistent navigational aid for the on-line image database, a local work list of cases to be reviewed, and easy access to information from other hospital information systems. A hierarchical method of information access is preferred because it provides the ability to start at high-level entities and iteratively narrow the scope of information from which to select subsequent operations. An implementation using hierarchical, nested software windows which fulfills such requirements shall be examined.

Peace Operations

National Research Council Canada - National Science Library

Proks, Josef

2000-01-01

Peace operations are more and more important in the contemporary world. The end of the Cold War increased not only possibilities of solving disputes by the international community but also by the number and diversity of threats and issues...

T cell lymphoblastic lymphoma/leukemia within an adrenocorticotropic hormone and thyroid stimulating hormone positive pituitary adenoma: A cytohistological correlation emphasizing importance of intra-operative squash smear.

Science.gov (United States)

Gupta, Rakesh K; Saran, Ravindra K; Srivastava, Arvind K; Jagetia, Anita; Garg, Lalit; Sharma, Mehar C

2017-08-01

We present a rare case of primary pituitary T cell lymphoma/leukemia (T-LBL) in association with adrenocorticotropic hormone (ACTH) and thyroid stimulating hormone (TSH) expressing pituitary adenoma in a 55-year-old woman highlighting the importance of intra-operative squash smears examination. The patient presented with complaints of headache, diminution of vision and recent onset altered sensorium. MRI revealed a mass lesion in the sellar-suprasellar region with non-visualization of pituitary gland separately, extending to involve adjacent structures diagnosed as invasive pituitary macroadenoma. Intra-operative tissue was sent for squash smear examination. The cytology showed a tumor comprising of sheets of immature lymphoid cells intermixed with clusters of pituitary acinar cells with many mitoses and tingible body macrophages. A diagnosis of presence of immature lymphoid cells within the pituitary was offered and differentials of infiltration by lymphoma cells from systemic disease versus primary central nervous lymphoma-like lymphoma arising in the pituitary adenoma were considered. Later paraffin section examination and immunohistochemistry corroborated with the squash findings and a final diagnosis of primary pituitary T cell lymphoma/leukemia in association with ACTH and TSH expressing pituitary adenoma was made. To date, only six cases of primary pituitary T cell lymphomas, including three T-LBL cases, have been reported. This is the seventh case and first one additionally describing cytohistological correlation and importance of intra-operative cytology. © 2017 Japanese Society of Neuropathology.

IMPROVING CONTROL ROOM DESIGN AND OPERATIONS BASED ON HUMAN FACTORS ANALYSES OR HOW MUCH HUMAN FACTORS UPGRADE IS ENOUGH ?

Energy Technology Data Exchange (ETDEWEB)

HIGGINS,J.C.; OHARA,J.M.; ALMEIDA,P.

2002-09-19

THE JOSE CABRERA NUCLEAR POWER PLANT IS A ONE LOOP WESTINGHOUSE PRESSURIZED WATER REACTOR. IN THE CONTROL ROOM, THE DISPLAYS AND CONTROLS USED BY OPERATORS FOR THE EMERGENCY OPERATING PROCEDURES ARE DISTRIBUTED ON FRONT AND BACK PANELS. THIS CONFIGURATION CONTRIBUTED TO RISK IN THE PROBABILISTIC SAFETY ASSESSMENT WHERE IMPORTANT OPERATOR ACTIONS ARE REQUIRED. THIS STUDY WAS UNDERTAKEN TO EVALUATE THE IMPACT OF THE DESIGN ON CREW PERFORMANCE AND PLANT SAFETY AND TO DEVELOP DESIGN IMPROVEMENTS.FIVE POTENTIAL EFFECTS WERE IDENTIFIED. THEN NUREG-0711 [1], PROGRAMMATIC, HUMAN FACTORS, ANALYSES WERE CONDUCTED TO SYSTEMATICALLY EVALUATE THE CR-LA YOUT TO DETERMINE IF THERE WAS EVIDENCE OF THE POTENTIAL EFFECTS. THESE ANALYSES INCLUDED OPERATING EXPERIENCE REVIEW, PSA REVIEW, TASK ANALYSES, AND WALKTHROUGH SIMULATIONS. BASED ON THE RESULTS OF THESE ANALYSES, A VARIETY OF CONTROL ROOM MODIFICATIONS WERE IDENTIFIED. FROM THE ALTERNATIVES, A SELECTION WAS MADE THAT PROVIDED A REASONABLEBALANCE BE TWEEN PERFORMANCE, RISK AND ECONOMICS, AND MODIFICATIONS WERE MADE TO THE PLANT.

Trends of significant operating events in assessing programmatic issues

International Nuclear Information System (INIS)

Lanning, W.D.

1990-01-01

This paper describes one part of the U. S. Nuclear Regulatory Commission's (NRC's) program for evaluating significant events and the process for identifying trends that may be indicative of programmatic weaknesses at operating nuclear power plants. A database management system was developed to permit analyses of significant operating events, events of potential safety significance, and certain reactor scrams. The analyses were based on events and problems reported by telephone to the NRC by licensees within hours of the events and, therefore, provided current operational data trend information. The regulatory requirements for reporting significant events, the screening criteria, and the process for identifying outliers for formal evaluation are described herein. This process contributed to an understanding of the underlying causes for events and problems. Examples are included of operating experience assessments that identified plants with a poor operating experience history that was attributable to procedural inadequacies, operator training deficiencies, inadequate root cause analysis, and inadequate control and planning of activities

NATO, Libya operations and intelligence co-operation – a step forward?

DEFF Research Database (Denmark)

Svendsen, Adam David Morgan

2011-01-01

developments can be opened up for some further analysis, forming the main focus of this article. Ultimately, this article concludes that, over time and albeit while gradual, we have seen what can be regarded as ‘a step forward’ in co-operative intelligence activities in Libya. Although several pressing......"With the ‘fall’ of Tripoli towards the end of August 2011, it has become increasingly apparent that the intelligence co-operation witnessed in Libya during the NATO campaign performed an increasingly important role in realizing operational and strategic ‘successes’. These recent intelligence...

Tank Farm Operations Surveillance Automation Analysis

International Nuclear Information System (INIS)

MARQUEZ, D.L.

2000-01-01

The Nuclear Operations Project Services identified the need to improve manual tank farm surveillance data collection, review, distribution and storage practices often referred to as Operator Rounds. This document provides the analysis in terms of feasibility to improve the manual data collection methods by using handheld computer units, barcode technology, a database for storage and acquisitions, associated software, and operational procedures to increase the efficiency of Operator Rounds associated with surveillance activities

Operationally efficient propulsion system study (OEPSS) data book. Volume 6; Space Transfer Propulsion Operational Efficiency Study Task of OEPSS

Science.gov (United States)

Harmon, Timothy J.

1992-01-01

This document is the final report for the Space Transfer Propulsion Operational Efficiency Study Task of the Operationally Efficient Propulsion System Study (OEPSS) conducted by the Rocketdyne Division of Rockwell International. This Study task studied, evaluated and identified design concepts and technologies which minimized launch and in-space operations and optimized in-space vehicle propulsion system operability.

Developing control room operator selection procedures

International Nuclear Information System (INIS)

Bosshardt, M.J.; Bownas, D.A.

1979-01-01

PDRI is performing a two-year study to identify the tasks performed and attributes required in electric power generating plant operating jobs, and focusing on the control room operator position. Approximately 65 investor-owned utilities are participating in the study

Supporting plant operation through computer-based procedures

International Nuclear Information System (INIS)

Martinez, Victor; Medrano, Javier; Mendez, Julio

2014-01-01

Digital Systems are becoming more important in controlling and monitoring nuclear power plant operations. The capabilities of these systems provide additional functions as well as support operators in making decisions and avoiding errors. Regarding Operation Support Systems, an important way of taking advantage of these features is using computer-based procedures (CBPs) tools that enhance the plant operation. Integrating digital systems in analogue controls at nuclear power plants in operation becomes an extra challenge, in contrast to the integration of Digital Control Systems in new nuclear power plants. Considering the potential advantages of using this technology, Tecnatom has designed and developed a CBP platform taking currently operating nuclear power plants as its design basis. The result is a powerful tool which combines the advantages of CBPs and the conventional analogue control systems minimizing negative effects during plant operation and integrating operation aid-systems to support operators. (authors)

Dynamic operational risk management at industrial irradiation plants

International Nuclear Information System (INIS)

Wieland, Patricia; Lustosa, Leonardo J.

2010-01-01

Although feasibility studies indicate that industrial irradiation can be sound business, some initiatives fail in few years. In Brazil, the operation of some industrial irradiation plants has been discontinued in spite of the growing export market for tropical fruits like mangoes and papayas, of which Brazil is one of the major producers. This paper discusses the overall aspects of the food irradiation in Brazil, singles out dynamic operation risk management as an important need and provides suggestions for further developments. This research work involves literature review as well as interviews with irradiation industry stake holders in order to identify the ORs and to assess the situation in a logical and integrated way. The results show that public acceptance is not a major issue for the food preservation industry in Brazil. On the contrary, evidences show that there is public support, provided that information on the subject is disseminated among consumers. Need for improvements have been detected in the areas of industrial operational risk management, external relations for export, and regulatory issues, among others to support decision making in establishing and developing industrial food irradiation capabilities to serve Brazilian tropical fruit exports. (author)

Identifying organisational principles and management practices important to the quality of health care services for chronic conditions.

Science.gov (United States)

Frølich, Anne

2012-02-01

effect of financial incentives and public performance reporting on the behaviour of professionals and quality of care. Using secondary data, KP and the Danish health care system were compared in terms of six central dimensions: population, health care professionals, health care organisations, utilization patterns, quality measurements, and costs. Differences existed between the two systems on all dimensions, complicating the interpretation of findings. For instance, observed differences might be due to similar tendencies in the two health care systems that were observed at different times, rather than true structural differences. The expenses in the two health care systems were corrected for differences in the populations served and the purchasing power of currencies. However, no validated methods existed to correct for observed differences in case-mixes of chronic conditions. Data from a population of about half a million patients with diabetes in a large U.S. integrated health care delivery system affiliated with 41 medical centers employing 15 different CCM management practices was the basis for identifying effective management practices. Through the use of statistical modelling, the management practice of provider alerts was identified as most effective for promoting screening for hemoglobin A1c and lipid profile. The CCM was used as a framework for implementing four rehabilitation programs. The model promoted continuity of care and quality of health care services. New management practices were developed in the study, and known practices were further developed. However, the observational nature of the study limited the generalisability of the findings. In a structured literature survey focusing on the effect of financial incentives and public performance reporting on the quality of health care services, few studies documenting an effect were identified. The results varied, and important program aspects or contextual variables were often omitted. A model describing

Identifying the nontechnical skills required of nurses in general surgical wards.

Science.gov (United States)

Marshall, Dianne C; Finlayson, Mary P

2018-04-01

To identify the nontechnical skills (NTS) required of nurses in general surgical wards for safe and effective care. As the largest occupational group, nurses are in an ideal position to block the vulnerabilities of patient adverse events in a surgical ward. Previous studies in the surgical environment have identified the NTS required of nurses for safe care in operating rooms; however, these skills have not been identified for nurses in general surgical wards. A nonparticipant observational descriptive design was used. A purposive sample of 15 registered nurses was recruited from four surgical wards and observed for a full shift on a morning, afternoon or night shift. Nonparticipant observations were conducted using field notes to collect data. A coding frame was developed, and an inductive process was used to analyse the data. A taxonomy comprising seven NTS required of nurses in their roles in surgical ward teams emerged from the data analysis. They are communication, leadership and management, planning, decision-making, situation awareness, teamwork and patient advocacy. Patient care provided by general surgical nurses involved the seven identified key NTS. These particular NTS are an important component of safe nursing practice as they underpin the provision of safe and effective care for general surgical patients. Nurses block the trajectory of error by using NTS to address the vulnerabilities in the system that can lead to adverse patient events. Identifying general surgical nurses' NTS enables the development of teaching strategies that target the learning of those skills to achieve successful work outcomes and improve patient safety. © 2018 John Wiley & Sons Ltd.

Research for correction pre-operative MRI images of brain during operation using particle method simulation

International Nuclear Information System (INIS)

Shino, Ryosaku; Koshizuka, Seiichi; Sakai, Mikio; Ito, Hirotaka; Iseki, Hiroshi; Muragaki, Yoshihiro

2010-01-01

In the neurosurgical procedures, surgeon formulates a surgery plan based on pre-operative images such as MRI. However, the brain is transformed by removal of the affected area. In this paper, we propose a method for reconstructing pre-operative images involving the deformation with physical simulation. First, the domain of brain is identified in pre-operative images. Second, we create particles for physical simulation. Then, we carry out the linear elastic simulation taking into account the gravity. Finally, we reconstruct pre-operative images with deformation according to movement of the particles. We show the effectiveness of this method by reconstructing the pre-operative image actually taken before surgery. (author)

Co-Operative Advances in Behavioral Health and Performance Research and Operations

Science.gov (United States)

VanderArk, Stephen T.; Leveton, Lauren B.

2011-01-01

In organizations that engage in both operations and applied research, with operational needs guiding research questions and research informing improved operations, the ideal goal is a synergy of ideas and information. In reality, this ideal synergy is often lacking. Real-time operational needs driving day-to-day decisions, lack of communication, lag time in getting research advances plugged into operations can cause both areas to suffer from this gap between operations and research. At Johnson Space Center, the Behavior Health and Performance group (BHP) strives to bridge this gap by following a Human Research Program framework: Expectations of future operational needs identify the knowledge gaps; the gaps in turn guide research leading to a product that is transitioned into operations. Thus, the direction those of us in research take is in direct response to current and future needs of operations. Likewise, those of us in operations actively seek knowledge that is supported by evidence-based research. We make an ongoing effort to communicate across the research and operations gap by working closely with each other and making a conscious effort to keep each other informed. The objective of the proposed panel discussion is to demonstrate through the following presentations the results of a successful collaboration between research and operations and to provide ASMA members with more practical knowledge and strategies for building these bridges to serve our field of practice well. The panel will consist of six presenters from BHP operations, internal BHP research, and external research instigated by BHP who together represent the entire BHP Research Transition to Operations Framework

Gyrokinetic linearized Landau collision operator

DEFF Research Database (Denmark)

Madsen, Jens

2013-01-01

, which is important in multiple ion-species plasmas. Second, the equilibrium operator describes drag and diffusion of the magnetic field aligned component of the vorticity associated with the E×B drift. Therefore, a correct description of collisional effects in turbulent plasmas requires the equilibrium......The full gyrokinetic electrostatic linearized Landau collision operator is calculated including the equilibrium operator, which represents the effect of collisions between gyrokinetic Maxwellian particles. First, the equilibrium operator describes energy exchange between different plasma species...... operator, even for like-particle collisions....

Identifying Key Issues and Potential Solutions for Integrated Arrival, Departure, Surface Operations by Surveying Stakeholder Preferences

Science.gov (United States)

Aponso, Bimal; Coppenbarger, Richard A.; Jung, Yoon; Quon, Leighton; Lohr, Gary; O’Connor, Neil; Engelland, Shawn

2015-01-01

NASA's Aeronautics Research Mission Directorate (ARMD) collaborates with the FAA and industry to provide concepts and technologies that enhance the transition to the next-generation air-traffic management system (NextGen). To facilitate this collaboration, ARMD has a series of Airspace Technology Demonstration (ATD) sub-projects that develop, demonstrate, and transitions NASA technologies and concepts for implementation in the National Airspace System (NAS). The second of these sub-projects, ATD-2, is focused on the potential benefits to NAS stakeholders of integrated arrival, departure, surface (IADS) operations. To determine the project objectives and assess the benefits of a potential solution, NASA surveyed NAS stakeholders to understand the existing issues in arrival, departure, and surface operations, and the perceived benefits of better integrating these operations. NASA surveyed a broad cross-section of stakeholders representing the airlines, airports, air-navigation service providers, and industry providers of NAS tools. The survey indicated that improving the predictability of flight times (schedules) could improve efficiency in arrival, departure, and surface operations. Stakeholders also mentioned the need for better strategic and tactical information on traffic constraints as well as better information sharing and a coupled collaborative planning process that allows stakeholders to coordinate IADS operations. To assess the impact of a potential solution, NASA sketched an initial departure scheduling concept and assessed its viability by surveying a select group of stakeholders for a second time. The objective of the departure scheduler was to enable flights to move continuously from gate to cruise with minimal interruption in a busy metroplex airspace environment using strategic and tactical scheduling enhanced by collaborative planning between airlines and service providers. The stakeholders agreed that this departure concept could improve schedule

Operator companion

International Nuclear Information System (INIS)

Natalizio, A.; Anderson, J.W.D.; Sills, H.E.

1988-01-01

Abundant, cheap computing power has provided industry with a far greater opportunity than was available one or two decades ago to automate industrial processes and to improve the man-machine interface. Exciting innovations in knowledge representation methods arising from artificial intelligence research pave the way for advanced support systems for assisting plant operators. AECL has recognized the importance of knowledge based system technology, particularly expert systems, in the achievement of this objective and also, as a strategic technology to be fully exploited in the next generation of CANDU reactors. Operator Companion, an expert system intended to diagnose plant faults and advise the operator on appropriate restoring or corrective actions, is a major undertaking which is receiving support within the research and engineering groups of AECL

Identifying and quantifying energy savings on fired plant using low cost modelling techniques

International Nuclear Information System (INIS)

Tucker, Robert; Ward, John

2012-01-01

Research highlights: → Furnace models based on the zone method for radiation calculation are described. → Validated steady-state and transient models have been developed. → We show how these simple models can identify the best options for saving energy. → High emissivity coatings predicted to give performance enhancement on a fired heater. → Optimal heat recovery strategies on a steel reheating furnace are predicted. -- Abstract: Combustion in fired heaters, boilers and furnaces often accounts for the major energy consumption on industrial processes. Small improvements in efficiency can result in large reductions in energy consumption, CO 2 emissions, and operating costs. This paper will describe some useful low cost modelling techniques based on the zone method to help identify energy saving opportunities on high temperature fuel-fired process plant. The zone method has for many decades, been successfully applied to small batch furnaces through to large steel-reheating furnaces, glass tanks, boilers and fired heaters on petrochemical plant. Zone models can simulate both steady-state furnace operation and more complex transient operation typical of a production environment. These models can be used to predict thermal efficiency and performance, and more importantly, to assist in identifying and predicting energy saving opportunities from such measures as: ·Improving air/fuel ratio and temperature controls. ·Improved insulation. ·Use of oxygen or oxygen enrichment. ·Air preheating via flue gas heat recovery. ·Modification to furnace geometry and hearth loading. There is also increasing interest in the application of refractory coatings for increasing surface radiation in fired plant. All of the techniques can yield savings ranging from a few percent upwards and can deliver rapid financial payback, but their evaluation often requires robust and reliable models in order to increase confidence in making financial investment decisions. This paper gives

Operational Stress Control and Readiness (OSCAR): The United States Marine Corps Initiative to Deliver Mental Health Services to Operating Forces

National Research Council Canada - National Science Library

Nash, William P

2006-01-01

Combat/operational stress control, defined as programs and policies to prevent, identify, and manage adverse combat/operational stress reactions, is the primary responsibility of military commanders...

Semi-automated knowledge discovery: identifying and profiling human trafficking

Science.gov (United States)

Poelmans, Jonas; Elzinga, Paul; Ignatov, Dmitry I.; Kuznetsov, Sergei O.

2012-11-01

We propose an iterative and human-centred knowledge discovery methodology based on formal concept analysis. The proposed approach recognizes the important role of the domain expert in mining real-world enterprise applications and makes use of specific domain knowledge, including human intelligence and domain-specific constraints. Our approach was empirically validated at the Amsterdam-Amstelland police to identify suspects and victims of human trafficking in 266,157 suspicious activity reports. Based on guidelines of the Attorney Generals of the Netherlands, we first defined multiple early warning indicators that were used to index the police reports. Using concept lattices, we revealed numerous unknown human trafficking and loverboy suspects. In-depth investigation by the police resulted in a confirmation of their involvement in illegal activities resulting in actual arrestments been made. Our human-centred approach was embedded into operational policing practice and is now successfully used on a daily basis to cope with the vastly growing amount of unstructured information.

Human factors review of electric power dispatch control centers. Volume 3. Operator information needs summary. Final report

Energy Technology Data Exchange (ETDEWEB)

Miller, R.J.; Najaf-Zadeh, K.; Darlington, H.T.; McNair, H.D.; Seidenstein, S.; Williams, A.R.

1982-10-01

Human factors is a systems-oriented interdisciplinary specialty concerned with the design of systems, equipment, facilities and the operational environment. An important aspect leading to the design requirements is the determination of the information requirements for electric power dispatch control centers. There are significant differences between the system operator's actions during normal and degraded states of power system operation, and power system restoration. This project evaluated the information the operator requires for normal power system and control system operations and investigates the changes of information required by the operator as the power system and/or the control system degrades from a normal operating state. The Phase II study, published in two volumes, defines power system states and control system conditions to which operator information content can be related. This volume presents a summary of operator information needs, identifying the needs for and the uses of power system information by a system operator in conditions ranging from normal through degraded operation. Training requirements are also included for planning entry-level and follow-on training for operators.

Model improves oil field operating cost estimates

International Nuclear Information System (INIS)

Glaeser, J.L.

1996-01-01

A detailed operating cost model that forecasts operating cost profiles toward the end of a field's life should be constructed for testing depletion strategies and plans for major oil fields. Developing a good understanding of future operating cost trends is important. Incorrectly forecasting the trend can result in bad decision making regarding investments and reservoir operating strategies. Recent projects show that significant operating expense reductions can be made in the latter stages o field depletion without significantly reducing the expected ultimate recoverable reserves. Predicting future operating cost trends is especially important for operators who are currently producing a field and must forecast the economic limit of the property. For reasons presented in this article, it is usually not correct to either assume that operating expense stays fixed in dollar terms throughout the lifetime of a field, nor is it correct to assume that operating costs stay fixed on a dollar per barrel basis

Identifying faecal impaction is important for ensuring the timely diagnosis of childhood functional constipation

DEFF Research Database (Denmark)

Modin, Line; Walsted, Anne-Mette; Jakobsen, Marianne Skytte

2015-01-01

AIM: Most research on functional constipation has been carried out at a tertiary level. We focused this study on a secondary-level hospital outpatients' department, assessing the distribution of diagnostic criteria for childhood functional constipation and evaluating the consequences of current...... diagnostic practice based on current guidelines. METHODS: We enrolled 235 children, aged two to 16 years of age, with functional constipation according to the Rome III criteria and assessed them using medical histories and physical examinations, including rectal examinations and ultrasound measurements...... the timely diagnosis of childhood functional constipation at the secondary care level. Ultrasound examination proved a reliable alternative to rectal examination or abdominal radiography when identifying faecal impaction....

Operating Room Utilization at Frederick Memorial Hospital

National Research Council Canada - National Science Library

Edwards, Jonathan A

2007-01-01

.... A logistical regression analysis was used to identify the impact of variables on operating room utilization rates and therefore help explain how or why some operating rooms incurred higher utilization rates than others...

Operational safety improvement in OPR 1000

International Nuclear Information System (INIS)

Jung, Y.-E.

2005-01-01

Nuclear power operating experience management might be an important factor for the operational safety improvement. KHNP's nuclear information management system, called KONIS receives, distributes and manages all nuclear information from domestic and foreign, especially operating experience. Ulchin 3 and 4, the first units of OPR 1000 series operates several organizations regarding management of operating experience e.g. specialist group program, various task forces, equipment specialist system for operator, etc. Peer review is another contribution for nuclear safety. (author)

[Inflammatory pseudotumour of the liver. Importance of intra-operative histopathology].

Science.gov (United States)

Onieva-González, Francisco Gabriel; Galeano-Díaz, Francisco; Matito-Díaz, María José; López-Guerra, Diego; Fernández-Pérez, Juana; Blanco-Fernández, Gerardo

2015-01-01

Inflammatory pseudotumour is a rare entity, considered benign, and characterised by inflammatory cell mesenchymal proliferation. The case is presented 70 year-old man with fever of unknown origin syndrome. He was diagnosed with liver abscesses (one segment IV, adjacent to gallbladder fundus and segment VI), who progressed slowly after antibiotic treatment. In the absence of a diagnosis, although fine needle puncture-aspiration and different imaging tests were performed, elective surgery was decided. The intra-operative histopathology reported the existence of an inflammatory pseudotumour. Inflammatory pseudotumours are clinically classified into different types according to their aetiology, varying therapeutic management based on the same. It is very difficult to diagnose because of the absence of symptoms, blood disorders, or specific radiological findings. Definitive diagnosis often requires histopathological confirmation, in most cases by percutaneous liver puncture, but sometimes exploratory laparotomy or even performing a hepatectomy for confirmation is necessary. The natural history of inflammatory pseudotumour is its regression; thus conservative management may be used through regular checks until resolution, or can be treated with antibiotics, anti-inflammatories and even corticosteroids. Surgical resection is indicated for persistent unresolved systemic symptoms despite medical treatment, in those situations where growth is evident, with or without symptoms, when involving the hepatic hilum, and finally, in case where the possibility of malignancy cannot be ruled out. Copyright © 2015 Academia Mexicana de Cirugía A.C. Published by Masson Doyma México S.A. All rights reserved.

AN OPERATING MODEL FOR THE ENVIRONMENTAL RISK ASSESSMENT APPLIED TO ITALIAN SITES OF COMMUNITY IMPORTANCE: IDENTIFICATION OF POTENTIAL EFFECTS ON SOIL

Directory of Open Access Journals (Sweden)

Valentina Rastelli

2014-01-01

Full Text Available The fast development of agro-biotechnologies asks for a harmonized approach in risk analysis of GMOs releases. An Italian experts group has elaborated an operating model for the environmental risk assessment (OMERA based on the assumption that the occurring of a risk is related to the presence of four components: source, diffusion factors, dispersal routes, receptors. This model has been further developed to become a Decision Supporting System based on Fuzzy logic (FDSS to assessors and notifiers. It is a web based Questionnaire that conducts the user through a decision tree from the source to the receptors and leads to the identification and assessment of the risks. The FDSS has been tested on case studies, simulating, as source, herbicide tolerant oilseed rape and insect resistant maize. The resulting identified potential effects on soil are changes to structure and microbial diversity.

Reproducibility of neuroimaging analyses across operating systems.

Science.gov (United States)

Glatard, Tristan; Lewis, Lindsay B; Ferreira da Silva, Rafael; Adalat, Reza; Beck, Natacha; Lepage, Claude; Rioux, Pierre; Rousseau, Marc-Etienne; Sherif, Tarek; Deelman, Ewa; Khalili-Mahani, Najmeh; Evans, Alan C

2015-01-01

Neuroimaging pipelines are known to generate different results depending on the computing platform where they are compiled and executed. We quantify these differences for brain tissue classification, fMRI analysis, and cortical thickness (CT) extraction, using three of the main neuroimaging packages (FSL, Freesurfer and CIVET) and different versions of GNU/Linux. We also identify some causes of these differences using library and system call interception. We find that these packages use mathematical functions based on single-precision floating-point arithmetic whose implementations in operating systems continue to evolve. While these differences have little or no impact on simple analysis pipelines such as brain extraction and cortical tissue classification, their accumulation creates important differences in longer pipelines such as subcortical tissue classification, fMRI analysis, and cortical thickness extraction. With FSL, most Dice coefficients between subcortical classifications obtained on different operating systems remain above 0.9, but values as low as 0.59 are observed. Independent component analyses (ICA) of fMRI data differ between operating systems in one third of the tested subjects, due to differences in motion correction. With Freesurfer and CIVET, in some brain regions we find an effect of build or operating system on cortical thickness. A first step to correct these reproducibility issues would be to use more precise representations of floating-point numbers in the critical sections of the pipelines. The numerical stability of pipelines should also be reviewed.

Identifying important and feasible policies and actions for health at community sports clubs: a consensus-generating approach.

Science.gov (United States)

Kelly, Bridget; King, Lesley; Bauman, Adrian E; Baur, Louise A; Macniven, Rona; Chapman, Kathy; Smith, Ben J

2014-01-01

Children's high participation in organised sport in Australia makes sport an ideal setting for health promotion. This study aimed to generate consensus on priority health promotion objectives for community sports clubs, based on informed expert judgements. Delphi survey using three structured questionnaires. Forty-six health promotion, nutrition, physical activity and sport management/delivery professionals were approached to participate in the survey. Questionnaires used an iterative process to determine aspects of sports clubs deemed necessary for developing healthy sporting environments for children. Initially, participants were provided with a list of potential standards for a range of health promotion areas and asked to rate standards based on their importance and feasibility, and any barriers to implementation. Subsequently, participants were provided with information that summarised ratings for each standard to indicate convergence of the group, and asked to review and potentially revise their responses where they diverged. In a third round, participants ranked confirmed standards by priority. 26 professionals completed round 1, 21 completed round 2, and 18 completed round 3. The highest ranked standards related to responsible alcohol practices, availability of healthy food and drinks at sports canteens, smoke-free club facilities, restricting the sale and consumption of alcohol during junior sporting activities, and restricting unhealthy food and beverage company sponsorship. Identifying and prioritising health promotion areas that are relevant to children's sports clubs assists in focusing public health efforts and may guide future engagement of sports clubs. Approaches for providing informational and financial support to clubs to operationalise these standards are proposed. Copyright © 2013 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

21 CFR 1304.32 - Reports of manufacturers importing coca leaves.

Science.gov (United States)

2010-04-01

... manufacturer importing or manufacturing from raw coca leaves shall submit information accounting for the importation and for all manufacturing operations performed between the importation and the manufacture of bulk or finished products standardized in accordance with U.S. Pharmacopoeia, National Formulary, or other...

The Customs Regulation of Export-Import Operations in the Context of the Deep and Comprehensive Free Trade Area between Ukraine and the EU

Directory of Open Access Journals (Sweden)

Kuzmin Oleh Ye.

2017-05-01

Full Text Available The article is concerned with the problems of reforming the customs regulation of export-import operations in the context of the Deep and Comprehensive Free Trade Area between Ukraine and the EU. Both the goods and the territorial structures of Ukraine’s export-import activities with the EU Member States were analyzed. Trends in the cooperation of the foreign economic actors in the Lviv region with the EU counterparts were explored. The key activities carried out in Ukraine in the sphere of customs regulation in the context of implementation of the Deep and Comprehensive Free Trade Area between Ukraine and the EU have been outlined and characterized, in particular: administration of tariff quotas, issuance of certificates by the customs authorities for the transport of EUR 1 goods, granting of the status of authorized exporter to economic entities, launching of an automated system of customs services «One-stop window», transition to electronic declaration, etc. The results, problematic issues and benefits of implementing the above activities in the sphere of customs regulation of the export-import activities of enterprises have been characterized.

Supply chain cost improvement opportunities through streamlining cross-border operations

Directory of Open Access Journals (Sweden)

Jan Hendrik Havenga

2013-09-01

Full Text Available The Cross-Border Road Transport Agency (CBRTA in South Africa aims to encourage and facilitate trade between South Africa and its neighbouring countries. The CBRTA sponsored a study by Stellenbosch University (SU to determine the logistics cost impact of cross-border delays between South Africa and its major neighbouring trading partners, and prioritise opportunities for improvement. SU is the proprietor of both a comprehensive freight demand model and a logistics cost model for South Africa, which enable extractions and extensions of freight flows and related costs for specific purposes. Through the application of these models, the following information is identified and presented in this paper: South Africa’s most important border posts (based on traffic flows; a product profile for imports and exports through these border posts; the modal split (road and rail; the annual logistics costs incurred on the corridors feeding the border posts, as well as the additional costs incurred due to border delays. The research has proved that the streamlining of border-post operations that take a total supply chain view (i.e. of both border operations and those that could be moved from the border is beneficial.

Competence Description for Personal Recommendations: The Importance of Identifying the Complexity of Learning and Performance Situations

Science.gov (United States)

Prins, Frans J.; Nadolski, Rob J.; Berlanga, Adriana J.; Drachsler, Hendrik; Hummel, Hans G. K.; Koper, Rob

2008-01-01

For competences development of learners and professionals, target competences and corresponding competence development opportunities have to be identified. Personal Recommender Systems (PRS) provide personal recommendations for learners aimed at finding and selecting learning activities that best match their needs. This article argues that a…

The importance of simulation facilities for the development of review criteria for advanced human system interfaces

International Nuclear Information System (INIS)

O'Hara, J.M.; Wachtel, J.

1994-01-01

Advanced control room (ACR) concepts are being developed in the commercial nuclear industry as part of future reactor designs. The ACRs will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator's overall role (function) in the system, the method of information presentation, the ways in which the operator interacts with the system, and the requirements on the operator to understand and supervise an increasingly complex system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The NRC is developing guidelines to support their review of these advanced designs. As part of this effort, a methodology for guidance development was established, and topics in need of further research were identified. Simulators of various kinds are likely to play important roles in the development of review guidelines and in the evaluation of ACRs. This paper describes a general approach to review criteria development, and discusses the role of simulators in addressing research needs

Selection/licensing of nuclear power plant operators

International Nuclear Information System (INIS)

Saari, L.M.

1983-07-01

An important aspect of nuclear power plant (NPP) safety is the reactor operator in the control room. The operators are the first individuals to deal with an emergency situation, and thus, effective performance on their part is essential for safe plant operations. Important issues pertaining to NPP reactor operators would fall within the personnel subsystem of our safety system analysis. While there are many potential aspects of the personnel subsystem, a key first step in this focus is the selection of individuals - attempting to choose individuals for the job of reactor operator who will safely perform the job. This requires a valid (job-related) selection process. Some background information on the Nuclear Regulatory Commission (NRC) licensing process used for selecting NPP reactor operators is briefly presented and a description of a research endeavor now underway at Battelle for developing a valid reactor operator licensing examination is included

Nuclear Power Plant Operating Experience from the IAEA/NEA International Reporting System for Operating Experience 2012-2014

International Nuclear Information System (INIS)

2018-03-01

The International Reporting System for Operating Experience (IRS) is an essential element of the international operating experience feedback system for nuclear power plants. Its fundamental objective is to contribute to improving safety of commercial nuclear power plants which are operated worldwide. IRS reports contain information on events of safety significance with important lessons learned which assist in reducing recurrence of events at other plants. This sixth publication, covering the period 2012 - 2014, follows the structure of the previous editions. It highlights important lessons based on a review of the approximately 240 event reports received from the participating countries over this period.

Hazard and operability study (Haz Op) of the 2 MW IEA-R1 reactor startup procedures

International Nuclear Information System (INIS)

Sauer, Maria E.L.J.; Correa, Francisco; Sara Neto, Antonio J.; Costa, Carlos A.R. da; Santos, Cilas C. dos; Cardenas, Jose P.N.; Berretta, Jose R.; Neves Conti, Thadeu das

1997-01-01

This work presents the Hazard and Operability Study (Haz Op) applied to startup procedures of the 2 MW IEA-R1 research reactor, at IPEN/CNEN-S P. The Haz Op was developed by reviewing the procedures of the installation startup, in order to identify hazards and/or operational problems caused by deviations in the execution of these routines. This paper summarizes this study. describing some potential problems of relevant importance to safety as well as preventives and/or correctives measures to avoid their occurrence. Besides, an benefits evaluation and the technique limitations is made. (author). 5 refs., 1 tab

Operation management for a low-carbon economy: a literature review on stakeholders, barriers and motivations

Directory of Open Access Journals (Sweden)

Daniela Andriani Ribeiro

2017-03-01

Full Text Available The aim of this study is to identify stakeholders acting as barriers and/or motivations for the adoption of low- -carbon operation management practices through the lens of the stakeholder theory. Stakeholders have a strong influence on companies to adopt environmental practices due to the climate change context and its consequences on the economic, environmental and social scenario. Thus, this study conducts a literature review in the Scopus database with searches that relate stakeholder theory and low-carbon practices to identify stakeholders. As a result, Customers and Government are the most active stakeholders as drivers or barriers to the adoption of environmental practices. Therefore, it is important to understand the different attributes of each stakeholder and their demands in order to trace hierarchy strategies of adopting any low-carbon operation management practices and creating mechanisms of collaboration with those stakeholders who drive the adoption of those practices.

ORSERG resource book. Operational reactor safety engineering and review group. Final report, March 1992

International Nuclear Information System (INIS)

1992-03-01

EPRI has prepared this resource book to help utilities with their Self-Assessment Programs at nuclear power plants. Self-assessments are reviews performed by nuclear power plant utilities to monitor plant performance status and adequacy, identify trends in operational activities important to safety, and assess the impact of these trends on plant safety. Activities performed as self-assessments include reviews and evaluations of plant performance and abnormal events, technical evaluations of plant activities to identify potential problem areas, and reviews of other sources of plant design and operating experience for applicability to safety. This resource book is based on information obtained from utilities and includes examples of activities and methods that have proven effective. The resource book includes a summary of NRC requirements, guidelines for self-assessment program planning, descriptions and examples of investigative techniques, and key references that can be consulted for additional information. It can serve as a training guide for plant staff members who are assigned to self-assessment activities. (author)

Data mining in bone marrow transplant records to identify patients with high odds of survival.

Science.gov (United States)

Taati, Babak; Snoek, Jasper; Aleman, Dionne; Ghavamzadeh, Ardeshir

2014-01-01

Patients undergoing a bone marrow stem cell transplant (BMT) face various risk factors. Analyzing data from past transplants could enhance the understanding of the factors influencing success. Records up to 120 measurements per transplant procedure from 1751 patients undergoing BMT were collected (Shariati Hospital). Collaborative filtering techniques allowed the processing of highly sparse records with 22.3% missing values. Ten-fold cross-validation was used to evaluate the performance of various classification algorithms trained on predicting the survival status. Modest accuracy levels were obtained in predicting the survival status (AUC = 0.69). More importantly, however, operations that had the highest chances of success were shown to be identifiable with high accuracy, e.g., 92% or 97% when identifying 74 or 31 recipients, respectively. Identifying the patients with the highest chances of survival has direct application in the prioritization of resources and in donor matching. For patients where high-confidence prediction is not achieved, assigning a probability to their survival odds has potential applications in probabilistic decision support systems and in combination with other sources of information.

Review on Malaysian Rail Transit Operation and Management System: Issues and Solution in Integration

Science.gov (United States)

Masirin, Mohd Idrus Mohd; Salin, Aminah Mohd; Zainorabidin, Adnan; Martin, David; Samsuddin, Norshakina

2017-08-01

In any context, operation and management of transportation systems are key issues which may affect both life quality and economic development. In large urban agglomerations, an efficient public transportation system may help abate the negative externalities of private car use such as congestion, air and noise pollution, accident and fuel consumption, without excessively penalizing user travel times or zone accessibility. Thus, this study is conducted to appraise the Malaysian rural rail transit operation and management system, which are considered important as there are many issues and solution in integration of the services that need to be tackled more conscientiously. The purpose of this paper is to describe some of the most important issues on integration of services and rail transit system in Malaysian and how to solve or reduce these problems and conflicts. In this paper, it consists of the historical development of rail transit construction in Malaysia. This paper also attempts to identify the important issues related to rail transit services and integration in Malaysian rural rail operation and management system. Comparison is also conducted with other countries such as UK, France, and Japan. Finally, a critical analysis is presented in this paper by looking at the possible application for future Malaysian rail transit operation system and management, especially focusing on enhancing the quality of Malaysian rural rail transit. In conclusion, this paper is expected to successfully review and appraise the existing Malaysian rural rail transit operation and management system pertaining to issues & solution in integration. It is also hoped that reformation or transformation of present service delivery quality of the rail transit operation and management will enable Malaysia to succeed in transforming Malaysian transportation system to greater heights.

Computerized operator decision aids

International Nuclear Information System (INIS)

Long, A.B.

1984-01-01

This article explores the potential benefits associated with the use of computers in nuclear plants by the operating crew as an aid in making decisions. Pertinent findings are presented from recently completed projects to establish the context in which operating decisions have to be made. Key factors influencing the decision-making process itself are also identified. Safety parameter display systems, which are being implemented in various forms by the nuclear industry, are described within the context of decision making. In addition, relevant worldwide research and development activities are examined as potential enhancements to computerized operator decision aids to further improve plant safety and availability

Unitary input DEA model to identify beef cattle production systems typologies

Directory of Open Access Journals (Sweden)

Eliane Gonçalves Gomes

2012-08-01

Full Text Available The cow-calf beef production sector in Brazil has a wide variety of operating systems. This suggests the identification and the characterization of homogeneous regions of production, with consequent implementation of actions to achieve its sustainability. In this paper we attempted to measure the performance of 21 livestock modal production systems, in their cow-calf phase. We measured the performance of these systems, considering husbandry and production variables. The proposed approach is based on data envelopment analysis (DEA. We used unitary input DEA model, with apparent input orientation, together with the efficiency measurements generated by the inverted DEA frontier. We identified five modal production systems typologies, using the isoefficiency layers approach. The results showed that the knowledge and the processes management are the most important factors for improving the efficiency of beef cattle production systems.

An investigation into the causes of unexpected intra-operative transoesophageal echocardiography findings.

Science.gov (United States)

Skinner, H J; Mahmoud, A; Uddin, A; Mathew, T

2012-04-01

There is uncertainty regarding echocardiography before cardiac surgery, especially with regard to timing and disease progression as well as potential errors. We investigated the causes of unexpected intra-operative transoesophageal echocardiography findings by performing a 33-month audit. We found that there were 50/797 (6%) unexpected findings that led to an alteration in surgical strategy in 34 (4%) patients. Of the unexpected findings, 25 (50%) were unrelated to pre-operative pathology. After reviewing pre-operative studies and reports, unexpected findings were found to be due to: reporting errors in 20 patients (44%); limitations in transthoracic compared to transoesophageal echocardiography in 14 patients (30%); disease progression in 10 patients (22%); and inter-observer variability in two patients (4%). We identified six reports out of 797 (0.8%) that contained potentially serious errors. Surgical management changed in 18/20 (90%) patients in whom the unexpected change was due to reporting error, compared to 16/30 (53%) patients whose pre-operative echocardiogram was correctly reported (p = 0.006). Our study suggests that pre-operative echocardiography reporting errors are common and important. Anaesthesia © 2012 The Association of Anaesthetists of Great Britain and Ireland.

Risk Importance Determination Process of CANDU Maintenance Rule Function

International Nuclear Information System (INIS)

Seo, Mi Ro; Jo, Ha Yan; Hwang, Mi Jeong

2009-01-01

In Korea, Maintenance Rule (MR) programs development for all PWR were completed. However, in case of PHWR (CANDU type, Wolsong Unit 1,2,3,4), the study of MR program was delayed, since the design concepts and operating experiences are different from those of PWR. This paper describes the process and results for the risk importance determination process of functions in scope. The risk importance was determined by PSA Basic Event Mapping and Delphi method. For Delphi evaluation, Delphi evaluation item for CANDU need to be developed because the design and normal operation functions are different from PWR

Proteome profiling of flax (Linum usitatissimum) seed: characterization of functional metabolic pathways operating during seed development.

Science.gov (United States)

Barvkar, Vitthal T; Pardeshi, Varsha C; Kale, Sandip M; Kadoo, Narendra Y; Giri, Ashok P; Gupta, Vidya S

2012-12-07

Flax (Linum usitatissimum L.) seeds are an important source of food and feed due to the presence of various health promoting compounds, making it a nutritionally and economically important plant. An in-depth analysis of the proteome of developing flax seed is expected to provide significant information with respect to the regulation and accumulation of such storage compounds. Therefore, a proteomic analysis of seven seed developmental stages (4, 8, 12, 16, 22, 30, and 48 days after anthesis) in a flax variety, NL-97 was carried out using a combination of 1D-SDS-PAGE and LC-MSE methods. A total 1716 proteins were identified and their functional annotation revealed that a majority of them were involved in primary metabolism, protein destination, storage and energy. Three carbon assimilatory pathways appeared to operate in flax seeds. Reverse transcription quantitative PCR of selected 19 genes was carried out to understand their roles during seed development. Besides storage proteins, methionine synthase, RuBisCO and S-adenosylmethionine synthetase were highly expressed transcripts, highlighting their importance in flax seed development. Further, the identified proteins were mapped onto developmental seed specific expressed sequence tag (EST) libraries of flax to obtain transcriptional evidence and 81% of them had detectable expression at the mRNA level. This study provides new insights into the complex seed developmental processes operating in flax.

[Importance of parathyroid SPECT and 99mTc scintigraphy, and of clinical, laboratorial, ultrasonographic and citologic correlation in the pre-operative localization of the parathyroid adenoma - pictorial assay].

Science.gov (United States)

Oliveira, Marco Antônio Condé de; Maeda, Sérgio Setsuo; Dreyer, Patrícia; Lobo, Alberto; Andrade, Victor Piana de; Hoff, Ana O; Biscolla, Rosa Paula Mello; Smanio, Paola; Brandão, Cynthia M A; Vieira, José G

2010-06-01

In patients with primary hyperparathyroidism, candidates for surgical intervention, the parathyroid pre-operative localization is of fundamental importance in planning the appropriate surgical approach. The additional acquisition of SPECT and Technetium-99m images, during parathyroid scintigraphy with Sestamibi, is not common practice. Usually, only planar image acquisition, 15 minutes prior and 2 hours after radiopharmaceutical administration, is performed. In our experience, the complete protocol in parathyroid scintigraphy increases the accuracy of pre-operative parathyroid localization. The complete utilization of all available nuclear medicine methods (SPECT e 99mTc) and image interpretation in a multidisciplinary context can improve the accuracy of parathyroid scintigraphy.

Measuring the operational efficiency of individual theme park attractions.

Science.gov (United States)

Kim, Changhee; Kim, Soowook

2016-01-01

This study assesses the operation efficiency of theme park attractions using the data envelopment analysis, utilizing actual data on 15 attractions at Samsung Everland located in Yongin-si, Republic of Korea. In particular, this study identifies crowding and waiting time as one of the main causes of visitor's satisfaction, and analyzes the efficiency of individual attractions in terms of waiting time. The installation area, installation cost, and annual repair cost are set as input factors and the number of annual users and customer satisfaction as output factors. The results show that the roller coaster-type attractions were less efficient than other types of attractions while rotating-type attractions were relatively more efficient. However, an importance performance analysis on individual attraction's efficiency and satisfaction showed that operational efficiency should not be the sole consideration in attraction installation. In addition, the projection points for input factors for efficient use of attractions and the appropriate reference set for benchmarking are provided as guideline for attraction efficiency management.

Pre-operative and early post-operative factors associated with surgical site infection after laparoscopic sleeve gastrectomy.

Science.gov (United States)

Ruiz-Tovar, Jaime; Oller, Inmaculada; Llavero, Carolina; Arroyo, Antonio; Muñoz, Jose Luis; Calero, Alicia; Diez, María; Zubiaga, Lorea; Calpena, Rafael

2013-08-01

Surgical procedures on obese patients are expected to have a high incidence of surgical site infection (SSI). The identification of pre-operative or early post-operative risk factors for SSI may help the surgeon to identify subjects in risk and adequately optimize their status. We conducted a study of the association of comorbidities and pre- and post-operative analytical variables with SSI following laparoscopic sleeve gastrectomy for the treatment of morbid obesity. We performed a prospective study of all morbidly obese patients undergoing laparoscopic sleeve gastrectomy as a bariatric procedure between 2007 and 2011. An association of clinical and analytical variables with SSI was investigated. The study included 40 patients with a mean pre-operative body mass index (BMI) of 51.2±7.9 kg/m(2). Surgical site infections appeared in three patients (7.5%), of whom two had an intra-abdominal abscess located in the left hypochondrium and the third had a superficial incisional SSI. Pre-operatively, a BMI >45 kg/m(2) (OR 8.7; p=0.008), restrictive disorders identified by pulmonary function tests (OR 10.0; p=0.012), a serum total protein concentration 30 mcg/dL (OR 13.0; p=0.003), and a mean corpuscular volume (MCV) operative SSI. Post-operatively, a serum glucose >128 mg/dL (OR 4.7; p=0.012) and hemoglobin operative anemia and hyperglycemia as risk factors for SSI. In these situations, the surgeon must be aware of and seek to control these risk factors.

THE HANFORD WASTE FEED DELIVERY OPERATIONS RESEARCH MODEL

International Nuclear Information System (INIS)

Berry, J.; Gallaher, B.N.

2011-01-01

Washington River Protection Solutions (WRPS), the Hanford tank farm contractor, is tasked with the long term planning of the cleanup mission. Cleanup plans do not explicitly reflect the mission effects associated with tank farm operating equipment failures. EnergySolutions, a subcontractor to WRPS has developed, in conjunction with WRPS tank farms staff, an Operations Research (OR) model to assess and identify areas to improve the performance of the Waste Feed Delivery Systems. This paper provides an example of how OR modeling can be used to help identify and mitigate operational risks at the Hanford tank farms.

Reactor operations, inspection and maintenance. PNGS Calibration Program

International Nuclear Information System (INIS)

Lopez, E.

1997-01-01

The PNGS Calibration Program is being implemented as a response to various concerns identified in recent PEER evaluations and AECB audits. Identified areas of concern were the approach to instrument calibration of Special Safety Systems (SSS). The implementation of a calibration program is a significant improvement in operating practices. A systematic and comprehensive approach to calibration of instrumentation will improve the quality of operation of the plant with a positive contribution to PNGS safety of operation and economic objectives. This paper describes the strategy to implement the proposed calibration program and describes its calibration data requirements. (DM)

Applying Multi-Class Support Vector Machines for performance assessment of shipping operations: The case of tanker vessels

DEFF Research Database (Denmark)

Pagoropoulos, Aris; Møller, Anders H.; McAloone, Tim C.

2017-01-01

of feature selection algorithms. Afterwards, a model based on Multi- Class Support Vector Machines (SVM) was constructed and the efficacy of the approach is shown through the application of a test set. The results demonstrate the importance and benefits of machine learning algorithms in driving energy....... Identifying the potential of behavioural savings can be challenging, due to the inherent difficulty in analysing the data and operationalizing energy efficiency within the dynamic operating environment of the vessels. This article proposes a supervised learning model for identifying the presence of energy...

Operational readiness of EFAD systems

International Nuclear Information System (INIS)

Kabat, M.J.

1992-02-01

An assessment of the operational readiness of the Emergency Filtered Air Discharge (EFAD) systems, installed in Canadian CANDU multi-unit nuclear power plants, was performed in this project. Relevant Canadian and foreign standards and regulatory requirements have been reviewed and documentation on EFAD system design, operation, testing and maintenance have been assessed to identify likely causes and potential failures of EFAD systems and their components under both standby and accident conditions. Recommendations have also been provided in this report for revisions which are needed to achieve and maintain appropriate operational readiness of EFAD systems

Qualitative techniques for managing operational risk

OpenAIRE

Delfiner, Miguel; Pailhé, Cristina

2009-01-01

Qualitative techniques are essential tools for identifying and assessing operational risk (OR). Their relevance in assessing OR can be understood due to the lack of a quantitative static model capable of capturing the dynamic operational risk profile which is shaped by managerial decisions. An operational risk profile obtained solely from historical loss data could further change due to corrective actions implemented by the bank after the occurrence of those events. This document introduces s...

Structural identifiability of cyclic graphical models of biological networks with latent variables.

Science.gov (United States)

Wang, Yulin; Lu, Na; Miao, Hongyu

2016-06-13

Graphical models have long been used to describe biological networks for a variety of important tasks such as the determination of key biological parameters, and the structure of graphical model ultimately determines whether such unknown parameters can be unambiguously obtained from experimental observations (i.e., the identifiability problem). Limited by resources or technical capacities, complex biological networks are usually partially observed in experiment, which thus introduces latent variables into the corresponding graphical models. A number of previous studies have tackled the parameter identifiability problem for graphical models such as linear structural equation models (SEMs) with or without latent variables. However, the limited resolution and efficiency of existing approaches necessarily calls for further development of novel structural identifiability analysis algorithms. An efficient structural identifiability analysis algorithm is developed in this study for a broad range of network structures. The proposed method adopts the Wright's path coefficient method to generate identifiability equations in forms of symbolic polynomials, and then converts these symbolic equations to binary matrices (called identifiability matrix). Several matrix operations are introduced for identifiability matrix reduction with system equivalency maintained. Based on the reduced identifiability matrices, the structural identifiability of each parameter is determined. A number of benchmark models are used to verify the validity of the proposed approach. Finally, the network module for influenza A virus replication is employed as a real example to illustrate the application of the proposed approach in practice. The proposed approach can deal with cyclic networks with latent variables. The key advantage is that it intentionally avoids symbolic computation and is thus highly efficient. Also, this method is capable of determining the identifiability of each single parameter and

Safety management in multiemployer worksites in the manufacturing industry: opinions on co-operation and problems encountered.

Science.gov (United States)

Nenonen, Sanna; Vasara, Juha

2013-01-01

Co-operation between different parties and effective safety management play an important role in ensuring safety in multiemployer worksites. This article reviews safety co-operation and factors complicating safety management in Finnish multiemployer manufacturing worksites. The paper focuses on the service providers' opinions; however, a comparison of the customers' views is also presented. The results show that safety-related co-operation between providers and customers is generally considered as successful but strongly dependent on the partner. Safety co-operation is provided through, e.g., training, orientation and risk analysis. Problems encountered include ensuring adequate communication, identifying hazards, co-ordinating work tasks and determining responsibilities. The providers and the customers encounter similar safety management problems. The results presented in this article can help companies to focus their efforts on the most problematic points of safety management and to avoid common pitfalls.

Identifying Key Performance Indicators for Holistic Hospital Management with a Modified DEMATEL Approach.

Science.gov (United States)

Si, Sheng-Li; You, Xiao-Yue; Liu, Hu-Chen; Huang, Jia

2017-08-19

Performance analysis is an important way for hospitals to achieve higher efficiency and effectiveness in providing services to their customers. The performance of the healthcare system can be measured by many indicators, but it is difficult to improve them simultaneously due to the limited resources. A feasible way is to identify the central and influential indicators to improve healthcare performance in a stepwise manner. In this paper, we propose a hybrid multiple criteria decision making (MCDM) approach to identify key performance indicators (KPIs) for holistic hospital management. First, through integrating evidential reasoning approach and interval 2-tuple linguistic variables, various assessments of performance indicators provided by healthcare experts are modeled. Then, the decision making trial and evaluation laboratory (DEMATEL) technique is adopted to build an interactive network and visualize the causal relationships between the performance indicators. Finally, an empirical case study is provided to demonstrate the proposed approach for improving the efficiency of healthcare management. The results show that "accidents/adverse events", "nosocomial infection", ''incidents/errors", "number of operations/procedures" are significant influential indicators. Also, the indicators of "length of stay", "bed occupancy" and "financial measures" play important roles in performance evaluation of the healthcare organization. The proposed decision making approach could be considered as a reference for healthcare administrators to enhance the performance of their healthcare institutions.

Lessons Learned from Missing Flooding Barriers Operating Experience

International Nuclear Information System (INIS)

Simic, Z.; Veira, M. P.

2016-01-01

Flooding hazard is highly significant for nuclear power plant safety because of its potential for common cause impact on safety related systems, and because operating experience reviews regularly identify flooding as a cause of concern. Source of the flooding could be external (location) or internal (plant design). The amount of flooding water could vary but even small amount might suffice to affect redundant trains of safety related systems for power supply and cooling. The protection from the flooding is related to the design-basis flood level (DBFL) and it consists of three elements: structural, organizational and accessibility. Determination of the DBFL is critical, as Fukushima Daiichi accident terribly proved. However, as the topic of flooding is very broad, the scope of this paper is focused only on the issues related to the missing flood barriers. Structural measures are physically preventing flooding water to reach or damage safety related system, and they could be permanent or temporary. For temporary measures it is important to have necessary material, equipment and organizational capacity for the timely implementation. Maintenance is important for permanent protection and periodical review is important for assuring readiness and feasibility of temporary flooding protection. Final flooding protection element is assured accessibility to safety related systems during the flooding. Appropriate flooding protection is based on the right implementation of design requirements, proper maintenance and periodic reviews. Operating experience is constantly proving how numerous water sources and systems interactions make flooding protection challenging. This paper is presenting recent related operating experience feedback involving equipment, procedures and analysis. Most frequent deficiencies are: inadequate, degraded or missing seals that would allow floodwaters into safety related spaces. Procedures are inadequate typically because they underestimate necessary

Cohering power of quantum operations

Energy Technology Data Exchange (ETDEWEB)

Bu, Kaifeng, E-mail: bkf@zju.edu.cn [School of Mathematical Sciences, Zhejiang University, Hangzhou 310027 (China); Kumar, Asutosh, E-mail: asukumar@hri.res.in [Harish-Chandra Research Institute, Chhatnag Road, Jhunsi, Allahabad 211019 (India); Homi Bhabha National Institute, Anushaktinagar, Mumbai 400094 (India); Zhang, Lin, E-mail: linyz@zju.edu.cn [Institute of Mathematics, Hangzhou Dianzi University, Hangzhou 310018 (China); Wu, Junde, E-mail: wjd@zju.edu.cn [School of Mathematical Sciences, Zhejiang University, Hangzhou 310027 (China)

2017-05-18

Highlights: • Quantum coherence. • Cohering power: production of quantum coherence by quantum operations. • Study of cohering power and generalized cohering power, and their comparison for differentmeasures of quantum coherence. • Operational interpretation of cohering power. • Bound on cohering power of a generic quantum operation. - Abstract: Quantum coherence and entanglement, which play a crucial role in quantum information processing tasks, are usually fragile under decoherence. Therefore, the production of quantum coherence by quantum operations is important to preserve quantum correlations including entanglement. In this paper, we study cohering power–the ability of quantum operations to produce coherence. First, we provide an operational interpretation of cohering power. Then, we decompose a generic quantum operation into three basic operations, namely, unitary, appending and dismissal operations, and show that the cohering power of any quantum operation is upper bounded by the corresponding unitary operation. Furthermore, we compare cohering power and generalized cohering power of quantum operations for different measures of coherence.

Mined Geologic Disposal System Concept of Operations

International Nuclear Information System (INIS)

Heidt, R.M.

1995-01-01

A Concept of Operations has been developed for the disposal of high-level radioactive waste in the potential geologic repository at Yucca Mountain. The Concept of Operations has been developed to document a cormion understanding of how the repository is to be operated. It is based on the repository architecture identified in the Initial Summary Report for Repository/Waste Package Advanced Conceptual Design and describes the operation of the repository from the initial receipt of waste through repository closure. Also described are operations for waste retrieval

Ergonomic design for operator flexibility

International Nuclear Information System (INIS)

Pope, R.H.

1980-01-01

The Three Mile Island accident highlighted the importance of ergonomic design of control rooms. Emphasis has been on a reappraisal of the reactor/operator interface, but in the United Kingdom the CEGB maintains that safe efficient operation needs a centralised information system optimised for all control room staff. (author)

Distributed Persistent Identifiers System Design

Directory of Open Access Journals (Sweden)

Pavel Golodoniuc

2017-06-01

Full Text Available The need to identify both digital and physical objects is ubiquitous in our society. Past and present persistent identifier (PID systems, of which there is a great variety in terms of technical and social implementation, have evolved with the advent of the Internet, which has allowed for globally unique and globally resolvable identifiers. PID systems have, by in large, catered for identifier uniqueness, integrity, and persistence, regardless of the identifier’s application domain. Trustworthiness of these systems has been measured by the criteria first defined by Bütikofer (2009 and further elaborated by Golodoniuc 'et al'. (2016 and Car 'et al'. (2017. Since many PID systems have been largely conceived and developed by a single organisation they faced challenges for widespread adoption and, most importantly, the ability to survive change of technology. We believe that a cause of PID systems that were once successful fading away is the centralisation of support infrastructure – both organisational and computing and data storage systems. In this paper, we propose a PID system design that implements the pillars of a trustworthy system – ensuring identifiers’ independence of any particular technology or organisation, implementation of core PID system functions, separation from data delivery, and enabling the system to adapt for future change. We propose decentralisation at all levels — persistent identifiers and information objects registration, resolution, and data delivery — using Distributed Hash Tables and traditional peer-to-peer networks with information replication and caching mechanisms, thus eliminating the need for a central PID data store. This will increase overall system fault tolerance thus ensuring its trustworthiness. We also discuss important aspects of the distributed system’s governance, such as the notion of the authoritative source and data integrity

Adaptive Micro-Grid Operation Based on IEC 61850

Directory of Open Access Journals (Sweden)

Wei Deng

2015-05-01

Full Text Available Automatically identifying the new equipment after its integration and adjusting operation strategy to realize “plug and play” functionality are becoming essential for micro-grid operations. In order to improve and perfect the micro-grid “plug and play” function with the increased amount of equipment with different information protocols and more diverse system applications, this paper presents a solution for adaptive micro-grid operation based on IEC 61850, and proposes the design and specific implementation methods of micro-grid “plug and play” function and system operation mode conversion in detail, by using the established IEC 61850 information model of a micro-grid. Actual operation tests based on the developed IED and micro-grid test platform are performed to verify the feasibility and validity of the proposed solution. The tests results show that the solution can automatically identify the IEC 61850 information model of equipment after its integration, intelligently adjust the operation strategies to adapt to new system states and achieves a reliable system operation mode conversion.

A practical guide for operational validation of discrete simulation models

Directory of Open Access Journals (Sweden)

Fabiano Leal

2011-04-01

Full Text Available As the number of simulation experiments increases, the necessity for validation and verification of these models demands special attention on the part of the simulation practitioners. By analyzing the current scientific literature, it is observed that the operational validation description presented in many papers does not agree on the importance designated to this process and about its applied techniques, subjective or objective. With the expectation of orienting professionals, researchers and students in simulation, this article aims to elaborate a practical guide through the compilation of statistical techniques in the operational validation of discrete simulation models. Finally, the guide's applicability was evaluated by using two study objects, which represent two manufacturing cells, one from the automobile industry and the other from a Brazilian tech company. For each application, the guide identified distinct steps, due to the different aspects that characterize the analyzed distributions

Mode Combinations and International Operations

DEFF Research Database (Denmark)

Benito, Gabriel R. G.; Petersen, Bent; Welch, Lawrence S.

2011-01-01

reveals that companies tend to combine modes of operation; thereby producing unique foreign operation mode “packages” for given activities and/or countries, and that the packages are liable to be modified over time – providing a potentially important optional path for international expansion. Our data...... key markets (China, UK and USA) as the basis for an exploration of the extent to which, and how and why, companies combine clearly different foreign operation modes. We examine their use of foreign operation mode combinations within given value activities as well as within given countries. The study...

International relations and co-operation

International Nuclear Information System (INIS)

2002-01-01

This bulletin contains information about activities of the Nuclear Regulatory Authority of the Slovak Republic (UJD). In this leaflet the international relations and co-operation of the UJD are presented. International community is aware of the fact that nuclear energy shall be used exclusively for peaceful purposes and on condition of high standard of nuclear safety. Therefore, the long-term aim of UJD in the area of international relations is to maintain and develop internationally recognised system of state supervision upon the peaceful use of nuclear energy and to reach internationally accepted level of nuclear safety in the Slovak Republic. There are many important international treaties (Treaty on the Non-proliferation of Nuclear Weapons Convention on Nuclear Safety, etc.) to which slovakia is a party. In order to meet the obligations of these treaties UJD has the main aim for contribute to the process of international disarmament, and to a mutually advantageous co-operation. By means of the most important international organisations (e.g. International Atomic Energy Agency) the Slovak Republic actively participates in the international co-operation. Under the leadership of UJD, Slovak institutions participate in many projects and activities which have the aim to improve the safety of nuclear international obligations. In addition, UJD actively participates in the integration process of the Slovak Republic into European and Trans-Atlantic structures. Since 1993 the co-operation with the European Commission and the Nuclear Energy Agency of Organisation for Economic Co-operation and development (OECD/NEA) has been successfully implemented. Besides multilateral co-operation UJD attaches extraordinary importance to bilateral co-operation, in particular with neighbouring countries. Regular meetings of senior Slovak experts with foreign experts are organised, with the aim to exchange the newest experiences and information on peaceful use of nuclear energy. Also in

Some Trends and Applications of Operational Research/Management Science to Operations Management

Directory of Open Access Journals (Sweden)

Ramón Companys Pascual

2015-01-01

Full Text Available The editor suggested us to write about our point of view on the current use of Operations Research techniques applied to the Operations Management and about its future evolution. With some of unconsciousness we accept it, but it is obvious that our vision, even though we try to do our best, will be partial and biased. Hence the title chosen shows signs of prudence. More caution have been applied to the development where, after a glance at the past and reflection on the abundance of new denominations without content, we consider five aspects that, nowadays, acquire increasing importance and that will strongly influence in future developments. Among the five aspects two correspond to trends in the field of operations research techniques, one is a philosophy in the field of operations management, another to an area of the company and the last one to an industrial sector in which operations management, supported by operations research methods, is taking a predominant role.

Training aids: the motor operator valve trainer

International Nuclear Information System (INIS)

McCulloch, B.

1987-01-01

The spectrum of training aids used in the nuclear industry runs the gamut from the very basic (i.e., valve training aids - gate, globe, check) to the highly complex (i.e., nuclear full scope simulator). Designing and purchasing the best training aids take much time, detailed investigation, and good understanding of plant operations. The training aid that has given the New York Power Authority the best results has been the motor operator valve (MOV) trainer. Some of the items that make the MOV trainer a good choice are: (1) large number of MOVs in the plant, (2) importance of MOVs to safe plant operation, (3) detailed MOV procedures used by the plant, (4) history of MOV problems, and (5) ability to demonstrate important concepts and operation - hammer blow effect, torque and limit switch adjustment and functions, and actual sequence of operation of the limitorque valve operator

Operation of nuclear power plants

International Nuclear Information System (INIS)

Severa, P.

1988-04-01

The textbook for training nuclear power plant personnel is centred on the most important aspects of operating modes of WWER-440 reactors. Attention is devoted to the steady state operation of the unit, shutdown, overhaul with refuelling, physical and power start-up. Also given are the regulations of shift operation and the duties of individual categories of personnel during the shift and during the change of shifts. (Z.M.). 3 figs., 1 tab

Automation and efficiency in the operational processes: a case study in a logistics operator

OpenAIRE

Nascimento, Dener Gomes do; Silva, Giovanni Henrique da

2017-01-01

Globalization has made the automations become increasingly feasible and with the technological development many operations can be optimized, bringing productivity gains. Logistics is a major benefit of all this development, because lives a time extremely competitive, in which being efficient is a requirement to stay alive in the market. Inserted in this context, this article seeks from the analysis of the processes in a distribution center, identify opportunities to automate operations to gai...

NREL Analysis Identifies Where Commercial Customers Might Benefit from

Science.gov (United States)

Battery Energy Storage | NREL | News | NREL NREL Analysis Identifies Where Commercial Customers Customers Might Benefit from Battery Energy Storage August 24, 2017 After upfront costs, batteries may reduce operating costs for customers paying demand charges Commercial electricity customers who are

77 FR 16718 - Taking and Importing Marine Mammals; Naval Explosive Ordnance Disposal School Training Operations...

Science.gov (United States)

2012-03-22

... bottlenose dolphins, by Level B harassment, incidental to Naval Explosive Ordnance Disposal School (NEODS... School Training Operations at Eglin Air Force Base, Florida AGENCY: National Marine Fisheries Service... Harassment Authorizations (IHAs) pursuant to section 101(a)(5)(D) of the MMPA for similar specified...

International military operations and mental health--A review.

Science.gov (United States)

Kaikkonen, Noora M; Laukkala, Tanja

2016-01-01

Volunteering in international military missions has been scrutinized for its effects on mental health. Different kinds of exposures to traumatic events are associated with a variety of mental disorders, mainly heightened rates of post-traumatic stress disorder (PTSD) and alcohol abuse. Based on the literature we discuss risk and protective factors concerning the psychological well-being of soldiers attending to international military operations. A systematic literature search was carried out using relevant search terms to identify the articles for this review. The ability to recognize and treat acute stress reactions during deployments is important. Post-deployment psychosocial support and services have a role in lowering barriers to care, diminishing stigma and also in recognizing individuals who suffer from psychological distress or psychiatric symptoms, to connect them with appropriate care. Further investigation of gender differences and the role of stigmatization is warranted. Most of those participating in international military operations are repatriated without problems, but repeated exposure to combat situations and other stressors may affect mental health in various ways. Stigmatization is still a barrier to care.

Special Operations Forces (SOF) technical analysis and evaluation

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-08-31

In response to Task Order 001, Los Alamos National Laboratory Contract 9-L5H-1508P-1, Betac Corporation is pleased to provide ten quick-response, short-term analytical papers in support of Low Intensity Conflict (LIC) and Special Operations (SO). The papers are study methodologies which provide background, baseline, concepts, approaches, and recommendations in the mission areas identified in the Statement of Work. Although the Statement of Work specifies only nine papers, a tenth paper has been included addressing Command Relationships, since this subject affects all other topics and is of critical importance to USCINCSOC in establishing the United States Special Operations Command (USSOCOM). Each paper addresses the feasibility of further effort in each area of interest. The ten papers address: (1) mission support systems; (2) research, development, and acquisition; (3) headquarters equipment; (4) C3I architecture; (5) intelligence dissemination; (6) intelligence collection management; (7) intelligence support to SOF targeting; (8) joint mission area analysis (JMAA); (9) joint SOF master plan; and (10) command relationships.

Importance of properly treating human performance in probabilistic risk assessments

International Nuclear Information System (INIS)

Kukielka, C.A.; Butler, F.G.; Chaiko, M.A.

1997-01-01

A critical issue to consider when developing Advanced Reactor Systems (ARS) is the operators' ability to reliably execute Emergency Operating Procedures (EOPs) during accidents. A combined probabilistic and deterministic method for evaluating operator performance is outlined in this paper. Three questions are addressed: (1) does the operator understand the status of the plant? (2) does the operator know what to do? and (3) what are the odds of successful EOP execution? Deterministic methods are used to evaluate questions 1 and 2, and question 3 is addressed by statistical analysis. Simulator exercises are used to develop probability of response as a function of time curves for time limited operator actions. This method has been used to identify and resolve deficiencies in the plant operating procedures and the operator interface. An application is provided to the Anticipated Transient without Scram accident sequences. The results of Human Reliability Analysis are compared with the results of similar BWR analyses. 2 figs., 2 tabs

DETERMINATION OF IMPORTANCE EVALUATION FOR THE SUBSURFACE EXPLORATORY STUDIES FACILITY

International Nuclear Information System (INIS)

Clark, W.J.

1999-01-01

This Determination of Importance Evaluation (DIE) applies to the Subsurface Exploratory Studies Facility (ESF), encompassing the Topopah Spring (TS) Loop from Station 0+00 meters (m) at the North Portal to breakthrough at the South Portal (approximately 78+77 m), the Enhanced Characterization of the Repository Block (ECRB) East-West Cross Drift Starter Tunnel (to approximate ECRB Station 0+26 m), and ancillary test and operation support areas in the TS Loop. This evaluation applies to the construction, operation, and maintenance of these excavations. A more detailed description of these items is provided in Section 6.0. Testing activities are not evaluated in this DIE. Certain construction activities with respect to testing activities are evaluated; but the testing activities themselves are not evaluated. The DIE for ESF Subsurface Testing Activities (BAJ3000000-01717-2200-000111) (CRWMS M and O 1998a) evaluates Subsurface ESF Testing activities. The construction, operation, and maintenance of the TS Loop niches and alcove slot cuts is evaluated herein and is also discussed in CRWMS M and O 1998a. The construction, operation, and maintenance of the Busted Butte subsurface test area in support of the Unsaturated Zone (UZ) Transport Test is evaluated in CRWMS M and O 1998a. Potential test-to-test interference and the waste isolation impacts of testing activities are evaluated in the ESF Subsurface Testing Activities DIE and other applicable evaluation(s) for the Job Package (JP), Test Planning Package (TPP), and/or Field Work Package (FWP). The objectives of this DIE are to determine whether the Subsurface ESF TS Loop and associated excavations, including activities associated with their construction and operation, potentially impact site characterization testing or the waste isolation capabilities of the site. Controls needed to limit any potential impacts are identified. The validity and veracity of the individual tests, including data collection, are the

DETERMINATION OF IMPORTANCE EVALUATION FOR THE SUBSURFACE EXPORATORY STUDIES FACILITY

Energy Technology Data Exchange (ETDEWEB)

W.J. Clark

1999-06-28

This Determination of Importance Evaluation (DIE) applies to the Subsurface Exploratory Studies Facility (ESF), encompassing the Topopah Spring (TS) Loop from Station 0+00 meters (m) at the North Portal to breakthrough at the South Portal (approximately 78+77 m), the Enhanced Characterization of the Repository Block (ECRB) East-West Cross Drift Starter Tunnel (to approximate ECRB Station 0+26 m), and ancillary test and operation support areas in the TS Loop. This evaluation applies to the construction, operation, and maintenance of these excavations. A more detailed description of these items is provided in Section 6.0. Testing activities are not evaluated in this DIE. Certain construction activities with respect to testing activities are evaluated; but the testing activities themselves are not evaluated. The DIE for ESF Subsurface Testing Activities (BAJ3000000-01717-2200-00011 Rev 01) (CRWMS M&O 1998a) evaluates Subsurface ESF Testing activities. The construction, operation, and maintenance of the TS Loop niches and alcove slot cuts is evaluated herein and is also discussed in CRWMS M&O 1998a. The construction, operation, and maintenance of the Busted Butte subsurface test area in support of the Unsaturated Zone (UZ) Transport Test is evaluated in CRWMS M&O 1998a. Potential test-to-test interference and the waste isolation impacts of testing activities are evaluated in the ESF Subsurface Testing Activities DIE and other applicable evaluation(s) for the Job Package (JP), Test Planning Package (TPP), and/or Field Work Package (FWP). The objectives of this DIE are to determine whether the Subsurface ESF TS Loop and associated excavations, including activities associated with their construction and operation, potentially impact site characterization testing or the waste isolation capabilities of the site. Controls needed to limit any potential impacts are identified. The validity and veracity of the individual tests, including data collection, are the responsibility

An operator support system for research reactor operations and fault diagnosis through a connectionist framework and PSA based knowledge based systems

International Nuclear Information System (INIS)

Varde, P.V.; Sankar, S.; Verma, A.K.

1998-01-01

During reactor upset/abnormal conditions, emphasis is placed on the plant operator's ability to quickly identify the problem and perform diagnosis and initiate recovery action to ensure the safety of the plant. However, the reliability of human action is adversely affected at the time of crisis due to time stress and psychological factors. The availability of operational aids capable of monitoring the status of the plant and quickly identifying the deviation from normal operation is expected to significantly improve the operator reliability. The development of operator support systems using probabilistic safety assessment (PSA) techniques and information is finding wide application in nuclear plant operation. Often it is observed that most of the applications use a rule-based approach for diagnosis as well as safety status/transient conditions monitoring. A more efficient approach using artificial neural networks for safety status/transient condition monitoring and rule-based systems for diagnosis and emergency procedure generation has been applied for the development of a prototype operator adviser (OPAD) system for a 100 MW(th) heavy water moderated, cooled and natural uranium fueled research reactor. The development objective of this system is to improve the reliability of operator action and hence the reactor safety at the time of crisis as well as in normal operation. In order to address safety objectives at various stages of development of OPAD, the PSA techniques and tools have been used for knowledge representation. It has been demonstrated, with recall tests on the artificial neural network, that it can efficiently identify the reactor status in real-time scenario. This paper discusses various issues related to the development of an operator support system in a comprehensive way, right from the study of safety objectives, to data collection, to implementation of such a system

Climate impacts from import of waste fuels; Klimatpaaverkan fraan import av braennbart avfall

Energy Technology Data Exchange (ETDEWEB)

Haraldsson, Maarten; Sundberg, Johan (Profu, Moelndal (Sweden))

2009-04-15

Imports of combustible waste has increased in recent years and imported waste has become an increasingly important fuel in the Swedish district heating systems. The projections for the next few years show that the imports can be much higher, partly due to reduced amounts of waste in the wake of economic downturn the world economy, partly because several new incinerators will be put into operation. In a environmental perspective, imports are controversial and it has been proposed that imports should be restricted. This report provides an assessment of the climate impact of importing waste for combustion. The report shows that greenhouse gas emissions due to imports of waste to the Swedish district heating plants in 2007 was reduced by 500 000 tonnes of carbon dioxide. This is equivalent to the emissions from 300 000 Swedes car journeys a year, or 2.5% of the total emission reduction target set by the Government for the non-trading sector until 2020. Imports of wood waste-chips accounts for the largest reduction, but the study shows that imports of other types of waste contribute to a reduction in emissions of greenhouse gases. The reasons for the reduction is that the use of imported waste fuel substitute for other heating and electricity generation, which gives the consequence that emissions are avoided. The largest emission reductions are obtained, however, by the importation of household waste by replacing the alternative waste treatment of the corresponding waste in the country of origin. In the countries from which imports of waste currently takes place there is a lack of treatment capacity for organic waste. The alternative treatment available is primarily deposition. This treatment causes significant emissions of methane, which is a very strong greenhouse gas. The shipment of waste that occur as a result of imports gives a marginal contribution of greenhouse gases, compared against the emission reductions outlined above

Operational Research for Developing Countries - a case of transfer of technology

DEFF Research Database (Denmark)

Vidal, Rene Victor Valqui; Ravn, Hans V.

1986-01-01

This paper is concerned with some fundamental aspects of the process of transfer of operational research from the industrialized countries to the Third World. Two complementary conceptions of operational research are identified: technical and social operational research. The main contribution of ...... of this paper is to regard the discussion of operational research for developing countries as a case of transfer of technology. Finally, some proposals for action and further research will be briefly outlined.......This paper is concerned with some fundamental aspects of the process of transfer of operational research from the industrialized countries to the Third World. Two complementary conceptions of operational research are identified: technical and social operational research. The main contribution...

An implementation of TPB method for learning important factors influencing knowledge sharing

Directory of Open Access Journals (Sweden)

Shahrzad Karampour

2012-10-01

Full Text Available Knowledge management incorporates the systematic management of vital knowledge resources and the associated processes of creating, organizing, gathering, utilizing, diffusion and exploiting data. A key challenge emerging is learn to encourage knowledge sharing (KS within firms because knowledge is an organization’s intellectual capital and plays an important role in gaining a competitive advantage. Isolated initiatives for promoting KS and team collaboration without taking into consideration the limitations and constraints of KS can halt any further development in the KM culture of an operation. In this paper, in addition to individual and social factors, an effect of individual perception, which is an important factor for any behavior, is studied. We first identify effective factors in KS behavior through the theory of planned behavior, six factors of trust, knowledge power, organizational motivation, organizational culture, IT and Communities of Practice (COP as effective factors in three categories of behavioral beliefs, subjective norms and perceived behaviors are analyzed for an Iranian research center. The results of this research helps develop KS behavior and enhance performance and creativity of research in this center.

International regulatory issues and approaches in the transition phase from operation to decommissioning

International Nuclear Information System (INIS)

Pyy, P.; Hrehor, M.; ); Murley, T.; Ranieri, R.; Laaksonen, J.

2005-01-01

Full text: The paper summarizes the work performed by an international group of senior nuclear safety regulators which was convened by the Committee on Nuclear Regulatory Activities (CNRA) of the OECD/Nuclear Energy Agency. The fundamental objective of this work was to identify the safety, environmental, organizational, human factors and public policy issues arising from decommissioning that will produce new challenges for the regulator. The study begins by recognizing that decommissioning is not simply an extension of operation and thus it is important for both the management of the facility and the regulator to understand the fundamental nature of the change taking place. Major regulatory policy issues discussed during this study include assurance of adequate funds, waste storage and disposal sites, material release criteria and site release criteria. Some of the important regulatory challenges relate to organizational and human factors, to safety and security requirements and to waste disposal and license termination. The importance of regular communication with both the corporate and site management and with public is recognized in the study as one of the key factors. When a nuclear facility ceases operation and enters into the decommissioning phase, both the operator and the regulator face a new set of challenges very different from those of an operating facility. The operator should have in place a strategic plan for decommissioning, prepared well in advance and reviewed by the regulatory body, to guide the facility managers and personnel through the changed circumstances. An essential part of the strategic plan should be the operator's plan for securing adequate funds to complete the decommissioning activities. In fact, the regulator should ensure that the operator sets aside funds, perhaps in a trust fund, while the facility is still operating and generating revenues. Both the operator and the regulator should expect a heightened public interest and concern

Identifiers for the 21st century: How to design, provision, and reuse persistent identifiers to maximize utility and impact of life science data.

Science.gov (United States)

McMurry, Julie A; Juty, Nick; Blomberg, Niklas; Burdett, Tony; Conlin, Tom; Conte, Nathalie; Courtot, Mélanie; Deck, John; Dumontier, Michel; Fellows, Donal K; Gonzalez-Beltran, Alejandra; Gormanns, Philipp; Grethe, Jeffrey; Hastings, Janna; Hériché, Jean-Karim; Hermjakob, Henning; Ison, Jon C; Jimenez, Rafael C; Jupp, Simon; Kunze, John; Laibe, Camille; Le Novère, Nicolas; Malone, James; Martin, Maria Jesus; McEntyre, Johanna R; Morris, Chris; Muilu, Juha; Müller, Wolfgang; Rocca-Serra, Philippe; Sansone, Susanna-Assunta; Sariyar, Murat; Snoep, Jacky L; Soiland-Reyes, Stian; Stanford, Natalie J; Swainston, Neil; Washington, Nicole; Williams, Alan R; Wimalaratne, Sarala M; Winfree, Lilly M; Wolstencroft, Katherine; Goble, Carole; Mungall, Christopher J; Haendel, Melissa A; Parkinson, Helen

2017-06-01

In many disciplines, data are highly decentralized across thousands of online databases (repositories, registries, and knowledgebases). Wringing value from such databases depends on the discipline of data science and on the humble bricks and mortar that make integration possible; identifiers are a core component of this integration infrastructure. Drawing on our experience and on work by other groups, we outline 10 lessons we have learned about the identifier qualities and best practices that facilitate large-scale data integration. Specifically, we propose actions that identifier practitioners (database providers) should take in the design, provision and reuse of identifiers. We also outline the important considerations for those referencing identifiers in various circumstances, including by authors and data generators. While the importance and relevance of each lesson will vary by context, there is a need for increased awareness about how to avoid and manage common identifier problems, especially those related to persistence and web-accessibility/resolvability. We focus strongly on web-based identifiers in the life sciences; however, the principles are broadly relevant to other disciplines.

Identifiers for the 21st century: How to design, provision, and reuse persistent identifiers to maximize utility and impact of life science data.

Directory of Open Access Journals (Sweden)

Julie A McMurry

2017-06-01

Full Text Available In many disciplines, data are highly decentralized across thousands of online databases (repositories, registries, and knowledgebases. Wringing value from such databases depends on the discipline of data science and on the humble bricks and mortar that make integration possible; identifiers are a core component of this integration infrastructure. Drawing on our experience and on work by other groups, we outline 10 lessons we have learned about the identifier qualities and best practices that facilitate large-scale data integration. Specifically, we propose actions that identifier practitioners (database providers should take in the design, provision and reuse of identifiers. We also outline the important considerations for those referencing identifiers in various circumstances, including by authors and data generators. While the importance and relevance of each lesson will vary by context, there is a need for increased awareness about how to avoid and manage common identifier problems, especially those related to persistence and web-accessibility/resolvability. We focus strongly on web-based identifiers in the life sciences; however, the principles are broadly relevant to other disciplines.

Duration and predictors of emergency surgical operations - basis for medical management of mass casualty incidents

Directory of Open Access Journals (Sweden)

Huber-Wagner S

2009-12-01

Full Text Available Abstract Background Hospitals have a critically important role in the management of mass causality incidents (MCI, yet there is little information to assist emergency planners. A significantly limiting factor of a hospital's capability to treat those affected is its surgical capacity. We therefore intended to provide data about the duration and predictors of life saving operations. Methods The data of 20,815 predominantly blunt trauma patients recorded in the Trauma Registry of the German-Trauma-Society was retrospectively analyzed to calculate the duration of life-saving operations as well as their predictors. Inclusion criteria were an ISS ≥ 16 and the performance of relevant ICPM-coded procedures within 6 h of admission. Results From 1,228 patients fulfilling the inclusion criteria 1,793 operations could be identified as life-saving operations. Acute injuries to the abdomen accounted for 54.1% followed by head injuries (26.3%, pelvic injuries (11.5%, thoracic injuries (5.0% and major amputations (3.1%. The mean cut to suture time was 130 min (IQR 65-165 min. Logistic regression revealed 8 variables associated with an emergency operation: AIS of abdomen ≥ 3 (OR 4,00, ISS ≥ 35 (OR 2,94, hemoglobin level ≤ 8 mg/dL (OR 1,40, pulse rate on hospital admission 120/min (OR 1,39, blood pressure on hospital admission Conclusions The mean operation time of 130 min calculated for emergency life-saving surgical operations provides a realistic guideline for the prospective treatment capacity which can be estimated and projected into an actual incident admission capacity. Knowledge of predictive factors for life-saving emergency operations helps to identify those patients that need most urgent operative treatment in case of blunt MCI.

WRAP TRUPACT loading systems operational test report

International Nuclear Information System (INIS)

DOSRAMOS, E.V.

1999-01-01

This Operational Test Report documents the operational testing of the TRUPACT process equipment HNF-3918, Revision 0, TRUPACT Operational Test Procedure. The test accomplished the following: Procedure validation; Facility equipment interface; Facility personnel support; and Subcontractor personnel support interface. Field changes are documented as test exceptions with resolutions. All resolutions are completed or a formal method is identified to track the resolution through to completion

Validity and reliability of a dental operator posture assessment instrument (PAI).

Science.gov (United States)

Branson, Bonnie G; Williams, Karen B; Bray, Kimberly Krust; Mcllnay, Sandy L; Dickey, Diana

2002-01-01

Basic operating posture is considered an important occupational health issue for oral health care clinicians. It is generally agreed that the physical posture of the operator, while providing care, should be such that all muscles are in a relaxed, well-balanced, and neutral position. Postures outside of this neutral position are likely to cause musculoskeletal discomfort. To date, the range of the neutral operator position has not been well-defined; nor have any specific instruments been identified that can quantitatively or semi-quantitatively assess dental operator posture. This paper reports on the development of an instrument that can be used to semi-quantitatively evaluate postural components. During the first phase of the study, an expert panel defined the basic parameters for acceptable, compromised, and harmful operator postures and established face validity of a posture assessment instrument (PAI). During the second phase, the PAI was tested for reliability using generalizability theory. Four raters tested the instrument for reliability. Overall, total PAI scores were similar amongst three of the raters, with the fourth rater's scores being slightly greater than the other three. The main effect of the rater on individual postural components was moderate, indicating that rater variance contributed to 11.9% of total variance. The PAI measures posture as it occurs and will have numerous applications when evaluating operator performance in the dental and dental hygiene education setting. Also, the PAI will prove useful when examining the effects of operator posture and musculoskeletal disorders.

Identifying Factors for Worker Motivation in Zambia's Rural Health Facilities.

Science.gov (United States)

Cross, Samuel S; Baernholdt, Dr Marianne

2017-01-01

Within Zambia there is a shortage of health workers in rural areas. This study aims to identify motivating factors for retaining rural health workers. Sixty rural health workers completed surveys and 46 were interviewed. They rated the importance of six motivating factors and discussed these and other factors in interviews. An interview was conducted with a Government Human Resources Manager (HR Manager) to elicit contextual information. All six factors were identified as being very important motivators, as were two additional factors. Additional career training was identified by many as the most important factor. Comparison of results and the HR Manager interview revealed that workers lacked knowledge about opportunities and that the HR manager was aware of barriers to career development. The Zambian government might better motivate and retain rural health workers by offering them any combination of identified factors, and by addressing the barriers to career development.

Iterative methods for nonlinear set-valued operators of the monotone type with applications to operator equations

International Nuclear Information System (INIS)

Chidume, C.E.

1989-06-01

The fixed points of set-valued operators satisfying a condition of monotonicity type in real Banach spaces with uniformly convex dual spaces are approximated by recursive averaging processes. Applications to important classes of linear and nonlinear operator equations are also presented. (author). 33 refs

Flight Operations . [Zero Knowledge to Mission Complete

Science.gov (United States)

Forest, Greg; Apyan, Alex; Hillin, Andrew

2016-01-01

Outline the process that takes new hires with zero knowledge all the way to the point of completing missions in Flight Operations. Audience members should be able to outline the attributes of a flight controller and instructor, outline the training flow for flight controllers and instructors, and identify how the flight controller and instructor attributes are necessary to ensure operational excellence in mission prep and execution. Identify how the simulation environment is used to develop crisis management, communication, teamwork, and leadership skills for SGT employees beyond what can be provided by classroom training.

Planning and Estimation of Operations Support Requirements

Science.gov (United States)

Newhouse, Marilyn E.; Barley, Bryan; Bacskay, Allen; Clardy, Dennon

2010-01-01

Life Cycle Cost (LCC) estimates during the proposal and early design phases, as well as project replans during the development phase, are heavily focused on hardware development schedules and costs. Operations (phase E) costs are typically small compared to the spacecraft development and test costs. This, combined with the long lead time for realizing operations costs, can lead to de-emphasizing estimation of operations support requirements during proposal, early design, and replan cost exercises. The Discovery and New Frontiers (D&NF) programs comprise small, cost-capped missions supporting scientific exploration of the solar system. Any LCC growth can directly impact the programs' ability to fund new missions, and even moderate yearly underestimates of the operations costs can present significant LCC impacts for deep space missions with long operational durations. The National Aeronautics and Space Administration (NASA) D&NF Program Office at Marshall Space Flight Center (MSFC) recently studied cost overruns and schedule delays for 5 missions. The goal was to identify the underlying causes for the overruns and delays, and to develop practical mitigations to assist the D&NF projects in identifying potential risks and controlling the associated impacts to proposed mission costs and schedules. The study found that 4 out of the 5 missions studied had significant overruns at or after launch due to underestimation of the complexity and supporting requirements for operations activities; the fifth mission had not launched at the time of the mission. The drivers behind these overruns include overly optimistic assumptions regarding the savings resulting from the use of heritage technology, late development of operations requirements, inadequate planning for sustaining engineering and the special requirements of long duration missions (e.g., knowledge retention and hardware/software refresh), and delayed completion of ground system development work. This paper updates the D

Methodology to identify, review, and evaluate components for license renewal

International Nuclear Information System (INIS)

Carlson, D.D.; Gregor, F.E.; Walker, R.S.

1988-01-01

A methodology has been developed to systematically identify, review, and evaluate plant equipment for license renewal. The method builds upon the existing licensing basis, operating history, and accepted deterministic and probabilistic techniques. Use of these approaches provides a focus for license renewal upon those safety-significant systems and components that are not routinely replaced, refurbished, or subject to detailed inspection as part of the plant's existing test, maintenance, and surveillance programs. Application of the method identified the PWR and BWR systems that should be subjected to detailed license renewal review. Detailed examination of two example systems demonstrates the approach. The review and evaluation of plant equipment for license renewal differ from the initial licensing of the plant. A substantial operating history has been established, the licensing basis has evolved from the original one, and plant equipment has been subject to periodic maintenance and surveillance throughout its life. In consideration of these differences, a basis for license renewal is needed. License renewal should be based upon continuation of the existing licensing basis and recognition of existing programs and operating history

Process hazards analysis (PrHA) program, bridging accident analyses and operational safety

International Nuclear Information System (INIS)

Richardson, J.A.; McKernan, S.A.; Vigil, M.J.

2003-01-01

Recently the Final Safety Analysis Report (FSAR) for the Plutonium Facility at Los Alamos National Laboratory, Technical Area 55 (TA-55) was revised and submitted to the US. Department of Energy (DOE). As a part of this effort, over seventy Process Hazards Analyses (PrHAs) were written and/or revised over the six years prior to the FSAR revision. TA-55 is a research, development, and production nuclear facility that primarily supports US. defense and space programs. Nuclear fuels and material research; material recovery, refining and analyses; and the casting, machining and fabrication of plutonium components are some of the activities conducted at TA-35. These operations involve a wide variety of industrial, chemical and nuclear hazards. Operational personnel along with safety analysts work as a team to prepare the PrHA. PrHAs describe the process; identi fy the hazards; and analyze hazards including determining hazard scenarios, their likelihood, and consequences. In addition, the interaction of the process to facility systems, structures and operational specific protective features are part of the PrHA. This information is rolled-up to determine bounding accidents and mitigating systems and structures. Further detailed accident analysis is performed for the bounding accidents and included in the FSAR. The FSAR is part of the Documented Safety Analysis (DSA) that defines the safety envelope for all facility operations in order to protect the worker, the public, and the environment. The DSA is in compliance with the US. Code of Federal Regulations, 10 CFR 830, Nuclear Safety Management and is approved by DOE. The DSA sets forth the bounding conditions necessary for the safe operation for the facility and is essentially a 'license to operate.' Safely of day-to-day operations is based on Hazard Control Plans (HCPs). Hazards are initially identified in the PrI-IA for the specific operation and act as input to the HCP. Specific protective features important to worker

Operating experience and aging-seismic assessment of electric motors

International Nuclear Information System (INIS)

Subudhi, M.; Burns, E.L.; Taylor, J.H.

1985-06-01

Objectives of this program are to identify concerns related to the aging and service wear of equipment operating in nuclear power plants, to assess their possible impact on plant safety, to identify effective inspection surveillance and monitoring methods and to recommend suitable maintenance practices for mitigating aging related concerns and diminish the rate of degradation due to aging and service wear. Motor design and materials of construction are reviewed to identify age-sensitive components. Operational and accidental stressors are determined, and their effect on promoting aging degradation is assessed. Failure modes, mechanisms, and causes have been reviewed from operating experiences and existing data banks. The study has also included consideration for the seismic correlation of age-degraded motor components. The aforementioned reviews and assessments were assimilated to characterize the dielectric, rotational, and mechanical hazards on motor performance and operational readiness. The functional indicators which can be monitored to assess motor component deterioration due to aging or other accidental stressors are identified. Conforming with the NPAR strategy as outlined in the program plan, the study also includes a preliminary discussion of current standards and guides, maintenance programs, and research activities pertaining to nuclear power plant safety-related electric motors

Variables influencing medical student learning in the operating room.

Science.gov (United States)

Schwind, Cathy J; Boehler, Margaret L; Rogers, David A; Williams, Reed G; Dunnington, Gary; Folse, Roland; Markwell, Stephen J

2004-02-01

The operating room (OR) is an important venue where surgeons do much of medical student teaching and yet there has been little work evaluating variables that influence learning in this unique environment. We designed this study to identify variables that affected medical student learning in the OR. We developed a questionnaire based on surgery faculty observations of learning in the OR. The medical students completed the questionnaire on 114 learning episodes in the OR. Pearson correlation coefficient was used to establish the strength of association between various variables and the student's overall perception of learning. The students evaluated 27 variables that might impact their learning in the OR. Strong correlations were identified between the attending physician's attitude, interactions and teaching ability in the OR and the environment being conducive to learning. Surgical faculty behavior is a powerful determinant of student perceptions of what provides for a favorable learning environment in the OR.

Operation statistics of KEKB

International Nuclear Information System (INIS)

Kawasumi, Takeshi; Funakoshi, Yoshihiro

2008-01-01

KEKB accelerator has been operated since December 1998. We achieved the design peak luminosity of 10.00/nb/s. The present record is 17.12/nb/s. Detailed data of the KEKB Operation is important to evaluate the KEKB performance and to suggest the direction of the performance enhancement. We have classified all KEKB machine time into the following seven categories (1) Physics Run (2) Machine Study (3) Machine Tuning (4) Beam Tuning (5) Trouble (6) Maintenance (7) Others, to estimate the accelerator availability. In this paper we report the operation statistics of the KEKB accelerator. (author)

Operating results and experience and operating regimes in changing demands of energy world

International Nuclear Information System (INIS)

Hobza, L.

2004-01-01

In this paper, there are stated some operating results and experience obtained from trial operation of Temelin NPP. In Europe, Temelin NPP is presently one of the latest implemented projects of the series of VVER 1000 nuclear units with proven V-320 pressurized water reactor. The distinction between Temelin NPP and original project lays mainly in supply of nuclear fuel and in I and C systems delivered by Westinghouse Company. Temelin NPP has passed through commissioning period and trial operation. The main goal of the trial operation was to meet the requirements of section 2, par. 4, point b) of Decree No. 106/98 Sb. and verification of project parameters and stability of operation, and the situation leading to violation of safety functions fulfilment according to Pre-operational Safety Report should not occur. The integral part of trial operation assessment was also successful performing of determined monitoring programmes, first refuelling and performing of prescribed tests and operational inspections. Simultaneously, first experience was obtained with nuclear fuel; providing of ancillary services; reliability of important components; operation of turbine-generator 1000 MW; chemical regime; influence to environment; and quality of contractors. As safety is the most important indicator, it can be stated that: no facts which would lead to decreasing of safety systems operability have been detected; no facts which would lead to negative affecting of barriers against fading the radioactivity into both working areas and environment, have been detected; good condition of fire safety has been continuously documented; requirements of limits for releasing waste water into environment have been continuously complied with; requirements of limits for releasing radioactive substances (in gaseous and/or liquid state) into environment have been continuously complied with. From the operation regimes point of view is clear, that it would be suitable for the power plant if the

Advanced operation strategy for feed-and-bleed operation in an OPR1000

International Nuclear Information System (INIS)

Kim, Bo Gyung; Yoon, Ho Joon; Kim, Jaewhan; Kang, Hyun Gook

2016-01-01

Highlights: • Advanced operating strategy covers all necessary conditions for F&B operation. • Advanced operating strategy identifies the urgency of F&B operation. • An advanced operating strategy for F&B operation is developed using a decision tree. • Human error probability is re-estimated based on a thermohydraulic analysis and K-HRA method. • An advanced operation strategy provides indications under various plant situations. - Abstract: When the secondary side is unavailable in a pressurized water reactor (PWR), heat from the core will accumulate in the primary side causing core damage. In this situation a heat removal mechanism called feed-and-bleed operation (F&B operation) must be used, which is a process of directly cooling the primary reactor cooling system (RCS). However, conventional operation strategy in emergency operating procedures (EOPs) does not cover all possible conditions to initiate F&B operation. If the EOP informs on the urgency of F&B operation, operators will be able to more clearly make decisions regarding F&B operation initiation. In order to cover all possible scenarios for F&B operation and systematically inform its urgency, an advanced operating strategy using a decision tree is developed in this study. The plant condition can be classified according to failure of secondary side, RCS pressure condition, injectable inventory to RCS, and remaining core inventory. RCS pressure, core level, and RCS temperature are representative indicators which provide information regarding the initiation of F&B operation. Indicators can be selected based on their detectability and quantification, and a decision tree is developed according to combinations of indicators. To estimate the effects of the advanced operation strategy, human error probability (HEP) of F&B operation is re-estimated based on a thermohydraulic analysis. The available time for operators to initiate F&B operation is also re-estimated to obtain more realistic data. This

Analyses of systems availability and operator actions to support the development of severe accident procedures

International Nuclear Information System (INIS)

Lutz, R.J. Jr.; Scobel, J.H.

1989-01-01

This paper reports on traditional analyses of severe accidents, such as those presented in Probabilistic Risk Assessment (PRA) studies of nuclear power stations, that have generally been performed on the assumption that all means of cooling the reactor core are lost and that no operator actions to mitigate the consequences or progression of the severe accident are performed. The assumption to neglect the availability of safety systems and operator actions which do not prevent core melting can lead to erroneous conclusions regarding the plant severer accident profile. Recent work in severe accident management has identified the need to perform analyses which consider all systems availabilities and operator actions, irrespective of their contribution to the prevention of core melting. These new analyses indicate that the traditional analyses result in overfly pessimistic predictions of the time of core melting and the subsequent potential for recovery of core cooling prior to core melting. Additionally, since the traditional analyses do not model all of the operator actions which are prescribed, the impact of additional severe accident operator actions on the progression and consequences of the accident cannot be reliably identified. Further, the more detailed analysis can change the focus of the importance of various system to the prevention of core damage and the mitigation of severe accident consequences. Finally, the simplicity of the traditional analyses can have a considerable impact on severe accident decision making, particularly in the evaluation of alternate plant design features and the priorities for research studies

C*-algebras and operator theory

CERN Document Server

Murphy, Gerald J

1990-01-01

This book constitutes a first- or second-year graduate course in operator theory. It is a field that has great importance for other areas of mathematics and physics, such as algebraic topology, differential geometry, and quantum mechanics. It assumes a basic knowledge in functional analysis but no prior acquaintance with operator theory is required.

Bubbling surface operators and S-duality