hysafe sbep-v20 numerical: Topics by WorldWideScience.org

Sample records for hysafe sbep-v20 numerical

Achievements of the EC network of excellence HySafe

NARCIS (Netherlands)

Jordan, T.; Adams, P.; Azkarate, I.; Baraldi, D.; Barthelemy, H.; Bauwens, L.; Bengaouer, A.; Brennan, S.; Carcassi, M.; Dahoe, A.; Eisenreich, N.; Engebo, A.; Funnemark, E.; Gallego, E.; Gavrikov, A.; Haland, E.; Hansen, A.M.; Haugom, G.P.; Hawksworth, S.; Jedicke, O.; Kessler, A.; Kotchourko, A.; Kumar, S.; Langer, G.; Ledin, S.; Makarov, D.; Marangon, A.; Markert, F.; Middha, P.; Molkov, V.; Nilsen, S.; Papanikolaou, E.; Perrette, L.; Reinecke, E.-A.; Schmidtchen, U.; Serre-Combe, P.; Stöcklin, M.; Sully, A.; Teodorczyk, A.; Tigreat, D.; Venetsanos, A.; Verfondern, K.; Versloot, N.A.H.; Vetere, A.; Wilms, M.; Zaretskiy, N.

2009-01-01

In many areas European research has been largely fragmented. To support the required integration and to focus and coordinate related research efforts the European Commission created a new instrument, the Networks of Excellences (NoEs). The goal of the NoE HySafe has been to provide the basis to
HySafe - The Network of Excellence for Hydrogen Safety

International Nuclear Information System (INIS)

Jordan, T.

2006-01-01

Safety always has been a critical issue for innovations as it influences the economic attractiveness and public acceptance of any new idea. Furthermore, a fair market for trading innovative products has to be based on homogenized legal regulations, which usually refer commonly accepted standards. Ideally, these standards should be the unique outcome of safety assessments, based on profound and concerted pre-normative research work. However, in Europe the research related to hydrogen safety is still fragmented. This was the reason for the European Commission to support the needed integration and focusing of the related efforts with the help of a new instrument, the so-called Networks of Excellence NoE. So, the goal of NoE HySafe is to provide the basis to facilitate the safe introduction of hydrogen as an energy carrier, by removing the described safety related obstacles. The network is constituted by 24 partners from 12 European countries and from Canada, representing private industries, especially from the automotive sector, universities and research institutions. More than 120 scientists perform integrative work in 15 work packages. A biennial report on Hydrogen Safety is going to be published, the available experimental facilities have been catalogued and qualified, educational programs are designed. After the first successful International Conference on Hydrogen Safety the second will be organized 2007 in San Sebastian, Spain. The European codes and standards activities will be supported by scientifically based information formulated in the HySafe position papers. The web-site www.hysafe.net offers a versatile platform for internal and external communication. The further work program is orientated not only at the results of a state-of-the-art report and a PIRT analysis performed within the NoE but also complies with the needs identified in the external network including other European projects related to hydrogen like StorHy, HyWays and NATURALHY. By shifting
HySafe research priorities workshop report Summary of the workshop organized in cooperation with US DOE and supported by EC JRC in Washington DC November 10-11 2014.

Energy Technology Data Exchange (ETDEWEB)

Jay Keller; Laura Hill; Kristian Kiuru; Groth, Katrina M.; Hecht, Ethan; Will James

2016-03-01

The HySafe research priorities workshop is held on the even years between the International Conference on Hydrogen Safety (ICHS) which is held on the odd years. The research priorities workshop is intended to identify the state-of-the-art in understanding of the physical behavior of hydrogen and hydrogen systems with a focus on safety. Typical issues addressed include behavior of unintended hydrogen releases, transient combustion phenomena, effectiveness of mitigation measures, and hydrogen effects in materials. In the workshop critical knowledge gaps are identified. Areas of research and coordinated actions for the near and medium term are derived and prioritized from these knowledge gaps. The stimulated research helps pave the way for the rapid and safe deployment of hydrogen technologies on a global scale. To support the idea of delivering globally accepted research priorities for hydrogen safety the workshop is organized as an internationally open meeting. In attendance are stakeholders from the academic community (universities, national laboratories), funding agencies, and industry. The industry participation is critically important to ensure that the research priorities align with the current needs of the industry responsible for the deployment of hydrogen technologies. This report presents the results of the HySafe Research Priorities Workshop held in Washing- ton, D.C. on November 10-11, 2014. At the workshop the participants presented updates (since the previous workshop organized two years before in Berlin, Germany) of their research and development work on hydrogen safety. Following the workshop, participants were asked to provide feedback on high-priority topics for each of the research areas discussed and to rank research area categories and individual research topics within these categories. The research areas were ranked as follows (with the percentage of the vote in parenthesis): 1. Quantitative Risk Assessment (QRA) Tools (23%) 2. Reduced Model
76 FR 20835 - Amendment of VOR Federal Airways V-1, V-7, V-11 and V-20; Kona, HI

Science.gov (United States)

2011-04-14

...; Airspace Docket No. 10-AWP-20] Amendment of VOR Federal Airways V-1, V-7, V-11 and V-20; Kona, HI AGENCY..., HI; V-1, V-7, V-11 and V-20. The FAA is taking this action due to procedural changes requiring..., (76 FR 13082), amends VOR Federal Airways V-1, V-7 V-11 and V-20; Kona, HI. These VHF Omnidirectional...
The combustion system of the MAN 20V35/44G gas engine; Das Brennverfahren des Gasmotors 20V35/44G von MAN

Energy Technology Data Exchange (ETDEWEB)

Bauer, Markus; Auer, Matthias; Stiesch, Gunnar [MAN Diesel and Turbo SE, Augsburg (Germany)

2013-04-15

The new gas engine 20V35/44G by MAN Diesel and Turbo SE has a power output of 10.6 MW. The high effective efficiency level of 48.4 % as well as numerous technical innovations allow an environment-friendly, economical and reliable engine operation. Key to achieve this is the combustion system, which has been optimised during advanced engineering by means of modern simulation tools and extensive single-cylinder tests. (orig.)
NDL-v2.0: A new version of the numerical differentiation library for parallel architectures

Science.gov (United States)

Hadjidoukas, P. E.; Angelikopoulos, P.; Voglis, C.; Papageorgiou, D. G.; Lagaris, I. E.

2014-07-01

We present a new version of the numerical differentiation library (NDL) used for the numerical estimation of first and second order partial derivatives of a function by finite differencing. In this version we have restructured the serial implementation of the code so as to achieve optimal task-based parallelization. The pure shared-memory parallelization of the library has been based on the lightweight OpenMP tasking model allowing for the full extraction of the available parallelism and efficient scheduling of multiple concurrent library calls. On multicore clusters, parallelism is exploited by means of TORC, an MPI-based multi-threaded tasking library. The new MPI implementation of NDL provides optimal performance in terms of function calls and, furthermore, supports asynchronous execution of multiple library calls within legacy MPI programs. In addition, a Python interface has been implemented for all cases, exporting the functionality of our library to sequential Python codes. Catalog identifier: AEDG_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEDG_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 63036 No. of bytes in distributed program, including test data, etc.: 801872 Distribution format: tar.gz Programming language: ANSI Fortran-77, ANSI C, Python. Computer: Distributed systems (clusters), shared memory systems. Operating system: Linux, Unix. Has the code been vectorized or parallelized?: Yes. RAM: The library uses O(N) internal storage, N being the dimension of the problem. It can use up to O(N2) internal storage for Hessian calculations, if a task throttling factor has not been set by the user. Classification: 4.9, 4.14, 6.5. Catalog identifier of previous version: AEDG_v1_0 Journal reference of previous version: Comput. Phys. Comm. 180
PROMIS®-29 v2.0 profile physical and mental health summary scores.

Science.gov (United States)

Hays, Ron D; Spritzer, Karen L; Schalet, Benjamin D; Cella, David

2018-03-22

The PROMIS-29 v2.0 profile assesses pain intensity using a single 0-10 numeric rating item and seven health domains (physical function, fatigue, pain interference, depressive symptoms, anxiety, ability to participate in social roles and activities, and sleep disturbance) using four items per domain. This paper describes the development of physical and mental health summary scores for the PROMIS-29 v2.0. We conducted factor analyses of PROMIS-29 scales on data collected from two internet panels (n = 3000 and 2000). Confirmatory factor analyses provided support for a physical health factor defined by physical function, pain (interference and intensity), and ability to participate in social roles and activities, and a mental health factor defined primarily by emotional distress (anxiety and depressive symptoms). Reliabilities for these two summary scores were 0.98 (physical health) and 0.97 (mental health). Correlations of the PROMIS-29 v2.0 physical and mental health summary scores with chronic conditions and other health-related quality of life measures were consistent with a priori hypotheses. This study develops and provides preliminary evidence supporting the reliability and validity of PROMIS-29 v2.0 physical and mental health summary scores that can be used in future studies to assess impacts of health care interventions and track changes in health over time. Further evaluation of these and alternative summary measures is recommended.
Overview of the independent ASTEC V2.0 validation by SARNET partners

International Nuclear Information System (INIS)

Chatelard, Patrick; Arndt, Siegfried; Atanasova, Boryana; Bandini, Giacomino; Bleyer, Alexandre; Brähler, Thimo; Buck, Michael; Kljenak, Ivo; Kujal, Bohumir

2014-01-01

Significant efforts are put into the assessment of the severe accident integral code ASTEC, jointly developed since several years by IRSN and GRS, either through comparison with results of the most important international experiments or through benchmarks with other severe accident simulation codes on plant applications. These efforts are done in first priority by the code developers’ organisations, IRSN and GRS, and also by numerous partners, in particular in the frame of the SARNET European network. The first version of the new series ASTEC V2 had been released in July 2009 to SARNET partners. Two subsequent V2.0 code revisions, including several modelling improvements, have been then released to the same partners, respectively in 2010 and 2011. This paper summarises first the approach of ASTEC validation vs. experiments, along with a description of the validation matrix, and presents then a few examples of applications of the ASTEC V2.0-rev1 version carried out in 2011 by the SARNET users. These calculation examples are selected in a way to cover diverse aspects of severe accident phenomenology, i.e. to cover both in-vessel and ex-vessel processes, in order to provide a good picture of the current ASTEC V2 capabilities. Finally, the main lessons drawn from this joint validation task are summarised, along with an evaluation of the current physical modelling relevance and thus an identification of the ASTEC V2.0 validity domain
The combustion system of the MAN 20V35/44G gas engine

Energy Technology Data Exchange (ETDEWEB)

Bauer, Markus; Auer, Matthias; Stiesch, Gunnnar [MAN Diesel and Turbo SE, Augsburg (Germany)

2013-05-15

The new gas engine 20V35/44G by MAN Diesel and Turbo SE has a power output of 10.6 MW. The high effective efficiency level of 48.4 % as well as numerous technical innovations allow an environmentally-friendly, economical and reliable engine operation. Key to achieve this is the combustion system, which has been optimised during advanced engineering by means of modern simulation tools and extensive single-cylinder tests. (orig.)
Deposit formation by 20 % (V/V) FAME fuels in premix burner systems; Ablagerungsbildung durch 20% (V/V) FAME-Brennstoffe in Vormischbrennersystemen

Energy Technology Data Exchange (ETDEWEB)

Jaschinski, Christian; Rheinberg, Oliver van [OWI Oel-Waerme-Institut GmbH, Aachen (Germany); RWTH Aachen (Germany). An-Institut

2012-09-15

In the domestic heating market the development and use of fuels with an increasing share of biogenic or alternative fuels is propagated. Due to the fact, that modern fuel oil burner feature a complex carburation techniques and combustion, changes on the fuel properties and composition can lead to increased emissions or deposit formation therein. Furthermore, the different fuel properties may result in decreased storage stability, which has to be evaluated before introducing them into the market. The scope of the project was to investigate the performance of low-sulfur domestic heating oil (DHO) with up to 20 % v/v FAME on the storage stability and on the use in oil-fired heating systems. The project was split into two major parts. The first part covered a two-year storage of the fuels including sampling and analysis of the fuels every half year. The analysis was conducted according to DIN 51603-1 for the pure DHO and according to DIN SPEC 51603-6 for the blends. It has been shown, that low sulphur domestic heating oil with up to 20 % (V/V) of FAME after two years of storage fits the parameter of the corresponding standards. Furthermore, a new testing method, called 'DGMK-714' derived from the PetroOxy-test (EN 16091) has been defined. With this method for the determination of oxidation stability the fuels can be characterized being comparable to the standardized testing methods of modified Rancimat or PetroOxy. The higher sample volume of the method allows further analysis of the fuel sample after testing for characterization of the fuels. The second part of the project investigated the deposit formation tendencies of the fuels in an idealized testing apparatus and in three different kinds of oil burners. Using the idealized testing apparatus proved an increased tendency of deposit formation during evaporation for an increasing FAME content. However, this tendency could not be observed in the three commercial oil-fired heating systems. A precise fuel
Printed board dipole trim magnet design for 20 MeV LIA

Energy Technology Data Exchange (ETDEWEB)

Liu, Chengjun; Zhu, Wenjun; Zhang, Kaizhi; Zhang, Wenwei; Yu, Haijun [China Academy of Engineering Physics., Chengdu (China). Inst. of Fluid Physics

1997-12-31

The printed board dipole trim magnet design for a 20 MeV LIA is presented. The prototype dipole magnet with the sin/cos distributed windings has demonstrated more than 650 Gs-cm integrated dipole field and 1% integrated dipole field homogeneity within 5 cm in radius, which is about 40% of the magnet radius. Numerical modeling of two prototype magnet designs using the 3D magnetic field code SCMAG is presented as well as data from magnetic field measurements of the two magnets. The agreement between the calculations and measurements is accurate to 2-3%. (author). 3 figs., 4 refs.
The evaluation of H total cross section from 20 MeV to 2 GeV

Energy Technology Data Exchange (ETDEWEB)

Tingjin, Liu [Chinese Nuclear Data Center, Beijing, BJ (China)

1996-06-01

The H total cross section was evaluated in the neutron energy region from 20 to 2000 MeV. The recommended experimental data were fitted by using Spline fit program with knot optimization, the fit values are taken as recommended ones. The data are compared with those from ENDF/B-6 (<100 MeV), the differences are 0.5%{approx}2.0% from 20 to 40 MeV, and almost the same in the energy region 40{approx}100 MeV.
76 FR 13082 - Amendment of VOR Federal Airways V-1, V-7, V-11 and V-20; Kona, HI

Science.gov (United States)

2011-03-10

... V-20; Kona, HI AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: This action amends four VHF Omnidirectional Range (VOR) Federal airways in the vicinity of Kona, HI; V- 1, V-7... Keahole Airport property Kailua-Kona, HI. This will enhance the management of aircraft operations over...
Neutron total cross section measurements in the energy region from 47 keV to 20 MeV

International Nuclear Information System (INIS)

Poenitz, W.P.; Whalen, J.F.

1983-05-01

Neutron total cross sections were measured for 26 elements. Data were obtained in the energy range from 47 keV to 20 MeV for 11 elements in the range of light-mass fission products. Previously reported measurements for eight heavy and actinide isotopes were extended to 20 MeV. Data were also obtained for Cu (47 keV to 1.4 MeV) and for Sc, Zn, Nd, Hf, and Pt (1.8 to 20 MeV). The present work is part of a continuing effort to provide accurate neutron total cross sections for evaluations and for optical-model parameteriztions. The latter are required for the derivation of other nuclear-data information of importance to applied programs. 37 references
The Budapest Reference Connectome Server v2.0.

Science.gov (United States)

Szalkai, Balázs; Kerepesi, Csaba; Varga, Bálint; Grolmusz, Vince

2015-05-19

The connectomes of different human brains are pairwise distinct: we cannot talk about an abstract "graph of the brain". Two typical connectomes, however, have quite a few common graph edges that may describe the same connections between the same cortical areas. The Budapest Reference Connectome Server v2.0 generates the common edges of the connectomes of 96 distinct cortexes, each with 1015 vertices, computed from 96 MRI data sets of the Human Connectome Project. The user may set numerous parameters for the identification and filtering of common edges, and the graphs are downloadable in both csv and GraphML formats; both formats carry the anatomical annotations of the vertices, generated by the FreeSurfer program. The resulting consensus graph is also automatically visualized in a 3D rotating brain model on the website. The consensus graphs, generated with various parameter settings, can be used as reference connectomes based on different, independent MRI images, therefore they may serve as reduced-error, low-noise, robust graph representations of the human brain. The webserver is available at http://connectome.pitgroup.org. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.
Evaluation of 235U(n,f) between 100 keV and 20 MeV

International Nuclear Information System (INIS)

Poenitz, W.P.

1979-07-01

The 235 U(n,f) cross section is evaluated in the energy range from 100 keV to 20 MeV. Experimental data are included up to the 1978 Harwell Conference on Neutron Physics. The evaluation methodology is discussed in detail. The shape and the normalization of the cross section are evalutated in separate steps. An extensive comparison of the evaluation result with experimental data sets is made. The shape of the cross section obtained in a preliminary version of the present evaluation and a normalization factor extracted from data provided within the framework of this evaluation were used by the Subcommittee on Standards and Normalizations of the Cross Sections Evaluation Working Group to establish 235 U(n,f) for ENDF/B-V above 100 keV. 20 figures, 6 tables
20 võtit ettevõtte konkurentsivõime tõstmiseks / Kadri Kristjuhan

Index Scriptorium Estoniae

Kristjuhan, Kadri

2005-01-01

Deloitte & Touche Eesti AS-i vanemkonsultant tutvustab 20 võtme teooriat. See peaks aitama Eesti tööstusel tulla edukalt välja olukorrast, kus kapitali napib ja tööjõud aina kallineb. Joonis: 20 võtme mudel. Vt. samas: Eesmärk on kaasata kõik töötajad
Evaluation of the NucliSens EasyQ v2.0 assay in comparison with the Roche Amplicor v1.5 and the Roche CAP/CTM HIV-1 Test v2.0 in quantification of C-clade HIV-1 in plasma.

Directory of Open Access Journals (Sweden)

Maximilian Muenchhoff

Full Text Available Human immunodeficiency virus type 1 (HIV-1 genetic diversity poses a challenge to reliable viral load monitoring. Discrepancies between different testing platforms have been observed, especially for non-clade-B virus. Therefore we compare, in antiretroviral therapy (ART-naïve South African subjects predominantly infected with HIV-1 clade-C, three commercially available assays: the COBAS AmpliPrep/COBAS TaqMan HIV-1 Test version 2.0 by Roche (CAP/CTM v2.0, the BioMérieux NucliSens Version 2.0 Easy Q/Easy Mag (NucliSens v2.0 and the Roche COBAS Amplicor HIV-1 Monitor Test Version 1.5 (Amplicor v1.5. Strong linear correlation was observed and Bland-Altman analyses showed overall good agreement between the assays with mean viral load differences of 0.078 log cp/ml (NucliSens v2.0 - Amplicor v1.5, 0.260 log cp/ml (CAP/CTM v2.0 - Amplicor v1.5 and 0.164 log cp/ml (CAP/CTM v2.0 - NucliSens v2.0, indicating lower mean viral load results for the Amplicor v1.5 and higher mean readings for the CAP/CTM v2.0. Consistent with observations following previous comparisons of CAP/CTM v2.0 versus Amplicor v1.5, the CAP/CTM v2.0 assay detected low-level viremia (median 65 cp/ml in more than one-third of those in whom viremia had been undetectable (<20 cp/ml in assays using the NucliSens platform. These levels of viremia are of uncertain clinical significance but may be of importance in early detection of ART resistance in those on treatment. Overall the three assays showed good comparability of results but with consistent, albeit relatively small, discrepancies for HIV-1 clade-C samples, especially in the low-viremic range that should be taken into account when interpreting viral load data.
Actinide neutron-induced fission up to 20 MeV

International Nuclear Information System (INIS)

Maslov, V.M.

2001-01-01

Fission and total level densities modelling along with double-humped fission barrier parameters allow to describe available actinide neutron-induced fission cross section data in the incident neutron energy range of ∼ 10 keV - 20 MeV. Saddle asymmetries relevant to shell correction model calculations influence fission barriers, extracted by cross section data analysis. The inner barrier was assumed axially symmetric in case of U, Np and Pu neutron-deficient nuclei. It is shown that observed irregularities in neutron-induced fission cross section data in the energy range of 0.5-3 MeV could be attributed to the interplay of few-quasiparticle excitations in the level density of fissioning and residual nuclei. Estimates of first-chance fission cross section and secondary neutron spectrum model were validated by 238 U fission, (n,2n) and (n,3n) data description up to 20 MeV. (author)
Actinide neutron-induced fission up to 20 MeV

Energy Technology Data Exchange (ETDEWEB)

Maslov, V M [Radiation Physics and Chemistry Problems Institute, Minsk-Sosny (Belarus)

2001-12-15

Fission and total level densities modelling along with double-humped fission barrier parameters allow to describe available actinide neutron-induced fission cross section data in the incident neutron energy range of {approx} 10 keV - 20 MeV. Saddle asymmetries relevant to shell correction model calculations influence fission barriers, extracted by cross section data analysis. The inner barrier was assumed axially symmetric in case of U, Np and Pu neutron-deficient nuclei. It is shown that observed irregularities in neutron-induced fission cross section data in the energy range of 0.5-3 MeV could be attributed to the interplay of few-quasiparticle excitations in the level density of fissioning and residual nuclei. Estimates of first-chance fission cross section and secondary neutron spectrum model were validated by {sup 238}U fission, (n,2n) and (n,3n) data description up to 20 MeV. (author)

Neutron radiative capture by the 241Am nucleus in the energy range 1 keV-20 MeV

International Nuclear Information System (INIS)

Zolotarev, K.I.; Ignatyuk, A.V.; Tolstikov, V.A.; Tertychnyj, G.Ya.

1998-01-01

Production of high actinides leads to many technological problems in the nuclear power. The 241 Am(n,γ) 242 Am reaction is one of the sources of high actinide buildup. So a knowledge of the radiative capture cross-section of 241 Am for neutron energies up to 20 MeV is of considerable important for present day fission reactors and future advanced reactors. The main goal of this paper is the evaluation of the excitation function for the reaction 241 Am(n,γ) 242 Am in the energy range 1 keV-20 MeV. The evaluation was done on the basis of analysed experimental data, data from theoretical model calculations and systematic predictions for 14.5 MeV and 20 MeV. Data from the present evaluation are compared with the cross-section values given in the evaluations carried out earlier. (author)
SMM observation of a cosmic gamma-ray burst from 20 keV to 100 MeV

Science.gov (United States)

Share, G. H.; Matz, S. M.; Messina, D. C.; Nolan, P. L.; Chupp, E. L.

1986-01-01

The Solar Maximum Mission gamma-ray spectrometer has detected an intense gamma-ray burst that occurred on August 5, 1984. The burst originated from a source in the constellation Hydra and lasted about 45 s. Its integral fluence at 20 keV was 0.003 erg/sq cm. Spectral evolution similar to other bursts detected by SMM was observed. The overall shape of the spectrum from 20 keV to 100 MeV, on timescales as short as 2 s, is relatively constant. This shape can be fitted by the sum of an exponential-type function and a power law. There is no evidence for narrow or broadened emission lines.
Evaluation of the 235U fission cross-section from 100 eV to 20 MeV

International Nuclear Information System (INIS)

Bhat, M.R.

1976-01-01

The evaluation of the 235 U fission cross section from 100 eV to 20 MeV for ENDF/B-V is described. The evaluated average cross sections from 100 eV to 200 keV are given, and it is proposed to include structure in the cross section in this energy region. Above 200 keV, the cross section is given as a smooth curve, and is recommended as a standard. Preliminary error estimates in the cross section are also given
Measurement of the Atmospheric Muon Spectrum from 20 to 3000 GeV

CERN Document Server

Achard, P; Aguilar-Benítez, M; Van den Ancker, M E; Alcaraz, J; Alemanni, G; Allaby, James V; Aloisio, A; Alviggi, M G; Anderhub, H; Andreev, V P; Anselmo, F; Arefev, A; Azemoon, T; Aziz, T; Bagnaia, P; Bajo, A; Baksay, G; Baksay, L; Bähr, J; Baldew, S V; Banerjee, S; Banerjee, Sw; Barczyk, A; Barillère, R; Bartalini, P; Basile, M; Batalova, N; Battiston, R; Bay, A; Becattini, F; Becker, U; Behner, F; Bellucci, L; Berbeco, R; Berdugo, J; Berges, P; Bertucci, B; Betev, B L; Biasini, M; Biglietti, M; Biland, A; Blaising, J J; Blyth, S C; Bobbink, G J; Böhm, A; Boldizsar, L; Borgia, B; Bottai, S; Bourilkov, D; Bourquin, Maurice; Braccini, S; Branson, J G; Brochu, F; Burger, J D; Burger, W J; Cai, X D; Capell, M; Cara Romeo, G; Carlino, G; Cartacci, A; Casaus, J; Cavallari, F; Cavallo, N; Cecchi, C; Cerrada, M; Chamizo-Llatas, M; Chiarusi, T; Chang, Y H; Chemarin, M; Chen, A; Chen, G; Chen, G M; Chen, H F; Chen, H S; Chiefari, G; Cifarelli, Luisa; Cindolo, F; Clare, I; Clare, R; Coignet, G; Colino, N; Costantini, S; de la Cruz, B; Cucciarelli, S; van Dalen, J A; De Asmundis, R; Déglon, P L; Debreczeni, J; Degré, A; Dehmelt, K; Deiters, K; Della Volpe, D; Delmeire, E; Denes, P; De Notaristefani, F; De Salvo, A; Diemoz, M; Dierckxsens, M; Ding, L K; Dionisi, C; Dittmar, M; Doria, A; Dova, M T; Duchesneau, D; Duda, M; Durán, I; Echenard, B; Eline, A; El-Hage, A; El-Mamouni, H; Engler, A; Eppling, F J; Extermann, P; Faber, G; Falagán, M A; Falciano, S; Favara, A; Fay, J; Fedin, O; Felcini, M; Ferguson, T; Fesefeldt, H S; Fiandrini, E; Field, J H; Filthaut, F; Fisher, W; Fisk, I; Forconi, G; Freudenreich, Klaus; Furetta, C; Galaktionov, Yu; Ganguli, S N; García-Abia, P; Gataullin, M; Gentile, S; Giagu, S; Gong, Z F; Grabosch, H J; Grenier, G; Grimm, O; Groenstege, H L; Grünewald, M W; Guida, M; Guo, Y N; Gupta, S; Gupta, V K; Gurtu, A; Gutay, L J; Haas, D; Haller, C; Hatzifotiadou, D; Hayashi, Y; He, Z X; Hebbeker, T; Hervé, A; Hirschfelder, J; Hofer, H; Hoferjun, H; Hohlmann, M; Holzner, G; Hou, S R; Huo, A X; Hu, Y; Ito, N; Jin, B N; Jing, C L; Jones, L W; de Jong, P; Josa-Mutuberria, I; Kantserov, V A; Kaur, M; Kawakami, S; Kienzle-Focacci, M N; Kim, J K; Kirkby, Jasper; Kittel, E W; Klimentov, A; König, A C; Kok, E; Korn, A J; Kopal, M; Koutsenko, V F; Kräber, M H; Kuang Hao Huai; Krämer, R W; Krüger, A; Kuijpers, J; Kunin, A; Ladrón de Guevara, P; Laktineh, I; Landi, G; Lebeau, M; Lebedev, A; Lebrun, P; Lecomte, P; Lecoq, P; Le Coultre, P; Le Goff, J M; Lei, Y; Leich, H; Leiste, R; Levtchenko, M; Levchenko, P M; Li, C; Li, L; Li, Z C; Likhoded, S; Lin, C H; Lin, W T; Linde, Frank L; Lista, L; Liu, Z A; Lohmann, W; Longo, E; Lü, Y S; Luci, C; Luminari, L; Lustermann, W; Ma Wen Gan; Ma, X H; Ma, Y Q; Malgeri, L; Malinin, A; Maña, C; Mans, J; Martin, J P; Marzano, F; Mazumdar, K; McNeil, R R; Mele, S; Meng, X W; Merola, L; Meschini, M; Metzger, W J; Mihul, A; Van Mil, A; Milcent, H; Mirabelli, G; Mnich, J; Mohanty, G B; Monteleoni, B; Muanza, G S; Muijs, A J M; Musicar, B; Musy, M; Nagy, S; Nahnhauer, R; Naumov, V A; Natale, S; Napolitano, M; Nessi-Tedaldi, F; Newman, H; Nisati, A; Novák, T; Nowak, H; Ofierzynski, R A; Organtini, G; Pal, I; Palomares, C; Paolucci, P; Paramatti, R; Parriaud, J F; Passaleva, G; Patricelli, S; Paul, T; Pauluzzi, M; Paus, C; Pauss, Felicitas; Pedace, M; Pensotti, S; Perret-Gallix, D; Petersen, B; Piccolo, D; Pierella, F; Pieri, M; Pioppi, M; Piroué, P A; Pistolesi, E; Plyaskin, V; Pohl, M; Pozhidaev, V; Pothier, J; Prokofev, D; Prokofiev, D O; Quartieri, J; Qing, C R; Rahal-Callot, G; Rahaman, M A; Raics, P; Raja, N; Ramelli, R; Rancoita, P G; Ranieri, R; Raspereza, A V; Ravindran, K C; Razis, P; Ren, D; Rescigno, M; Reucroft, S; Rewiersma, P A M; Riemann, S; Riles, K; Roe, B P; Rojkov, A; Romero, L; Rosca, A; Rosemann, C; Rosenbleck, C; Rosier-Lees, S; Roth, S; Rubio, J A; Ruggiero, G; Rykaczewski, H; Saidi, R; Sakharov, A; Saremi, S; Sarkar, S; Salicio, J; Sánchez, E; Schäfer, C; Shchegelskii, V; Schmitt, V; Schöneich, B; Schopper, Herwig Franz; Schotanus, D J; Sciacca, C; Servoli, L; Shen, C Q; Shevchenko, S; Shivarov, N; Shoutko, V; Shumilov, E; Shvorob, A V; Son, D; Souga, C; Spillantini, P; Steuer, M; Stickland, D P; Stoyanov, B; Strässner, A; Sudhakar, K; Sulanke, H; Sultanov, G G; Sun, L Z; Sushkov, S; Suter, H; Swain, J D; Szillási, Z; Tang, X W; Tarjan, P; Tauscher, L; Taylor, L; Tellili, B; Teyssier, D; Timmermans, C; Ting, Samuel C C; Ting, S M; Tonwar, S C; Tóth, J; Trowitzsch, G; Tully, C; Tung, K L; Ulbricht, J; Unger, M; Valente, E; Verkooijen, H; Van de Walle, R T; Vásquez, R; Veszpremi, V; Vesztergombi, G; Vetlitskii, I; Vicinanza, D; Viertel, Gert M; Villa, S; Vivargent, M; Vlachos, S; Vodopyanov, I; Vogel, H; Vogt, H; Vorobev, I; Vorobyov, A A; Wadhwa, M; Wang, R G; Wang, Q; Wang, X L; Wang, X W; Wang, Z M; Weber, M; Van Wijk, R F; Wijnen, T A M; Wilkens, H; Wynhoff, S; Xia, L; Xu, Y P; Xu, J S; Xu, Z Z; Yamamoto, J; Yang, B Z; Yang, C G; Yang, H J; Yang, M; Yang, X F; Yao, Z G; Yeh, S C; Yu, Z Q; Zalite, A; Zalite, Yu; Zhang, C; Zhang, F; Zhang, J; Zhang, S; Zhang, Z P; Zhao, J; Zhou, S J; Zhu, G Y; Zhu, R Y; Zhuang, H L; Zhu, Q Q; Zichichi, A; Zimmermann, B; Zöller, M; Zwart, A N M

2004-01-01

The absolute muon flux between 20 GeV and 300 GeV is measured with the L3 magnetic muon spectrometer for zenith angles ranging from 0 degree to 58 degrees. Due to the large exposure of about 150 m2 sr d, and the excellent momentum resolution of the L3 muon chambers, a precision of 2.3% at 150 GeV in the vertical direction is achieved. The ratio of positive to negative muons is studied between 20 GeV and 500 GeV, and the average vertical muon charge ratio is found to be 1.285 +- 0.003 (stat.)+- 0.019 (syst.).
Measurement of the atmospheric muon spectrum from 20 to 2000 GeV

CERN Document Server

Unger, Michael

2003-01-01

The atmospheric muon spectrum between 20 and 2000 GeV was measured with the L3 magnetic muon spectrometer for zenith angles ranging from 0 to 58 degrees. Due to the large data set and the good detector resolution, a precision of 2.6% at 100 GeV was achieved for the absolute normalization of the vertical muon flux. The momentum dependence of the ratio of positive to negative muons was obtained between 20 and 630 GeV.
Monte Carlo 20 and 45 MeV Bremsstrahlung and dose-reduction calculations

Energy Technology Data Exchange (ETDEWEB)

Goosman, D.R.

1984-08-14

The SANDYL electron-photon coupled Monte Carlo code has been compared with previously published experimental bremsstrahlung data at 20.9 MeV electron energy. The code was then used to calculate forward-directed spectra, angular distributions and dose-reduction factors for three practical configurations. These are: 20 MeV electrons incident on 1 mm of W + 59 mm of Be, 45 MeV electrons of 1 mm of W and 45 MeV electrons on 1 mm of W + 147 mm of Be. The application of these results to flash radiography is discussed. 7 references, 12 figures, 1 table.
Monte Carlo 20 and 45 MeV Bremsstrahlung and dose-reduction calculations

International Nuclear Information System (INIS)

Goosman, D.R.

1984-01-01

The SANDYL electron-photon coupled Monte Carlo code has been compared with previously published experimental bremsstrahlung data at 20.9 MeV electron energy. The code was then used to calculate forward-directed spectra, angular distributions and dose-reduction factors for three practical configurations. These are: 20 MeV electrons incident on 1 mm of W + 59 mm of Be, 45 MeV electrons of 1 mm of W and 45 MeV electrons on 1 mm of W + 147 mm of Be. The application of these results to flash radiography is discussed. 7 references, 12 figures, 1 table
A Innovative Engineering Summer School V2.0

DEFF Research Database (Denmark)

Bennedsen, Jens; Larsen, Peter Gorm

2010-01-01

This article describes a summer school which focuses on a conceive-design project. The summer school has been run three times; each of the implementations is described. The last implementation (v2.0) is discussed and four challenges are identified and discussed in detail: assignments, the role...
Performances of large BGO crystals below 20 MeV

International Nuclear Information System (INIS)

Burq, J.P.; Chemarin, M.; El Mamouni, H.

1986-11-01

This paper presents the performances of large tapered BGO crystals to low energy photons of 6 to 20 MeV. The read-out of the crystals was made with large area photodiodes associated to shaping amplifiers
Tensile properties and microstructure of helium injected and reactor irradiated V-20 Ti

International Nuclear Information System (INIS)

Tanaka, M.P.; Bloom, E.E.; Horak, J.A.

1980-01-01

The objective of this work was to determine the effect of preinjected helium followed by neutron irradiation on the mechanical properties and microstructure of V-20% Ti. These results will be used for the evaluation of the potential use of V-20% Ti in fusion reactor service
Low-temperature thermal expansion measurements in PrV2Al20

International Nuclear Information System (INIS)

Magata, A.; Matsumoto, Y.; Tsujimoto, M.; Tomita, T.; Sakai, A.; Nakatsuji, S.; Kiichler, R.

2016-01-01

We have measured thermal expansion of PrV 2 Al 20 and LaV 2 Al 20 from room temperature down to 2 K, using a capacitance dilatometer. Linear thermal expansion ΔL/L along [111] direction decreases monotonically on cooling in both materials. The extracted 4ƒ electrons contribution of the linear thermal expansion coefficient a clearly shows a broad peak at ∼ 30 K which may correspond to the crystal electric field excited state at 40 K suggested in the previous specific heat study. (paper)
Enhancement of radiative Auger emission in lithium-like 23V20+ ions

International Nuclear Information System (INIS)

Bernstein, E.M.; Clark, M.W.

1988-01-01

Measurements have been made of projectile X-ray spectra coincident with single electron losss in collisions of 3.5-9.0 MeV amu -1 23 V q+ (q = 19, 20, 21) ions with He targets under single collision conditions. Non-monoenergetic X-rays observed in the coincidence spectra for V 20+ (lithium-like) projectiles are attributed to the radiative Auger effect (RAE). The intensity of RAE photons relative to the characteristic K x-ray yield is more than an order of magnitude larger than expected from theoretical calculations and from earlier measurements for atomic targets. (author)
Software of the System Protection for the PEFP 20MeV Proton Linac

International Nuclear Information System (INIS)

Song, Young-Gi; Hong, In-Seok; Cho, Yong-Sub

2007-01-01

A 20 MeV proton linear accelerator (linac) has been developed at Proton Engineering Frontier Project (PEFP). A 20 MeV linac consists of 50 keV proton injector, 3 MeV radio frequency quadrupole (RFQ), and 20 MeV drift tube linac (DTL). PEFP control system is developed with several sub-systems (e.g. machine control, diagnostic control, timing control, and interlock systems). These systems have each EPICS based control system which provides a network-based real time distributed control. For stable and harmonic operation, we had developed sequential logic by using state notation language (SNL) and database records with alarm fields for warning signal. The various control system can drop a transmission rate of the control network traffic. We need to manage control signals by a control network gateway and protect values of control servers by security management. In this paper, the stabilization methods of the control signals are described and the results of the stabilized signals are presented
A numerical dressing method for the nonlinear superposition of solutions of the KdV equation

International Nuclear Information System (INIS)

Trogdon, Thomas; Deconinck, Bernard

2014-01-01

In this paper we present the unification of two existing numerical methods for the construction of solutions of the Korteweg–de Vries (KdV) equation. The first method is used to solve the Cauchy initial-value problem on the line for rapidly decaying initial data. The second method is used to compute finite-genus solutions of the KdV equation. The combination of these numerical methods allows for the computation of exact solutions that are asymptotically (quasi-)periodic finite-gap solutions and are a nonlinear superposition of dispersive, soliton and (quasi-)periodic solutions in the finite (x, t)-plane. Such solutions are referred to as superposition solutions. We compute these solutions accurately for all values of x and t. (paper)
Wilson loops to 20th order numerical stochastic perturbation theory

Energy Technology Data Exchange (ETDEWEB)

Horsley, R. [Edinburgh Univ. (United Kingdom). School of Physics; Hotzel, G.; Perlt, H.; Schiller, A. [Leipzig Univ. (Germany). Inst. fuer Theoretische Physik; Ilgenfritz, E.M. [Humboldt-Universitaet, Berlin (Germany). Inst. fuer Physik; Joint Institute for Nuclear Research, VBLHEP, Dubna (Russian Federation); Millo, R.; Rakow, P.E.L. [Liverpool Univ. (Germany). Theoretical Physics Div.; Nakamura, Y. [RIKEN Advanced Institute for Computational Science, Kobe, Hyogo (Japan); Schierholz, G. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

2012-05-15

We calculate Wilson loops of various sizes up to 20 loops in SU(3) pure lattice gauge theory at different lattice sizes for Wilson gauge action using the technique of numerical stochastic perturbation theory. This allows us to investigate the perturbative series for various Wilson loops at high loop orders. We observe differences in the behavior of those series as function of the loop order. Up to n=20 we do not find evidence for the factorial growth of the expansion coefficients often assumed to characterize an asymptotic series. Based on the actually observed behavior we sum the series in a model parametrized by hypergeometric functions. Alternatively we estimate the total series in boosted perturbation theory using information from the first 14 loops. We introduce generalized ratios of Wilson loops of different sizes. Together with the corresponding Wilson loops from standard Monte Carlo measurements they enable us to assess their non-perturbative parts.
Numerical simulation research of 300 kV, 5 electrodes negative ion beam system

International Nuclear Information System (INIS)

Wang Huisan; Jian Guangde

2001-01-01

According to the characteristic of high current negative ion beam extraction and acceleration system for negative ion-based neutral beam injector, a numerical simulation model and a calculation code of the negative ion beam system are established in order to assist the design of the system. The movement behavior of the negative ion beam and accompanying electron beam in joint effect of the electric and magnetic field of the system is calculated. The effect of relative parameters on the negative ion beam optics characteristic is investigated, such as beam density, negative ion initial temperature and stripping losses, final electrode aperture displacement. The electromagnetic configuration in the system is optimized. The initial optimized results for the 300 kV, 5 electrodes negative ion beam system show that the magnetic field of this system can deflect the electron beam to the extraction electrode as electron acceptor at lower energy and that assuming 20% stripping losses of the H - ion in extraction region and 21 mA ·cm -2 extracted H - beam density, the r.m.s. divergence angle of all output beam lets and divergence angle of 85% output beam lets are 0.327 deg. and 0.460 deg., respectively
Numerical and classical analysis of V/STOL aircraft using selected propulsion systems

Science.gov (United States)

Wilson, S. B., III; Kidwell, G. H., Jr.; Christiansen, R. S.

1981-01-01

The development needed for the evolution of selected V/STOL research vehicles into optimized antisubmarine warfare (ASW) aircraft configurations, using numerical procedures and traditional analytical methods, has been examined. Three propulsion systems, which represent state-of-the-art development aimed at solving the thrust-vectoring and attitude-control problems of V/STOL aircraft, are analyzed. The use of NASA computer programs for aircraft synthesis (ACSYNT), and for optimizing configurations (COMMIN), coupled with contractor-supplied propulsion system data provides for accurate performance prediction of the selected ASW configurations. Particular emphasis on the transition phase between the research vehicle and the optimized configuration demonstrates the strengths and weaknesses of using generic research aircraft instead of building prototypes to demonstrate new technology
Physical modeling and numerical simulation of V-die forging ingot with central void

DEFF Research Database (Denmark)

Christiansen, Peter; Hattel, Jesper Henri; Bay, Niels

2014-01-01

Numerical simulation and physical modeling performed on small-scale ingots made from pure lead, having a hole drilled through their centerline to mimic porosity, are utilized to characterize the deformation mechanics of a single open die forging compression stage and to identify the influence...... of the lower V-die angle on porosity closure and forging load requirements of large cast ingots. Results show that a lower V-die angle of 120 provides the best closure of centerline porosity without demanding the highest forging loads or developing unreasonably asymmetric shapes that may create difficulties...... in multi-stage open die forging procedures....
Systematic of fusion incompleteness in 20Ne induced reactions at energy 4-7 MeV/nucleon

International Nuclear Information System (INIS)

Ali, Sabir; Ahmad, Tauseef; Kumar, Kamal

2016-01-01

In the present work, a study of fusion incompleteness using the 20 Ne projectile over 51 V, 55 Mn and 59 Co and targets has been carried out. The experiment involving 20 N e+ 51 V system was performed at VECC, Kolkata, India. The targets of thickness range 1.19-1.50 rug/cm 2 of spectroscopically pure 51 V (purity 99.99%) were prepared by depositing on aluminum backing of thickness range 1.47-1.64 mg/cm 2 by the vacuum evaporation technique at the target lab of VECC. A stack of six 51 V targets was irradiated for ≈ 11 hrs by 20 Ne 6+ beam at ≈145 MeV. The irradiation of the stack covered the desired energy range of 82-145 MeV. The beam current was ≈ 40 nA during the irradiation hours. The energy of the 20 Ne ion beam incident on each target foil was calculated using stopping power software SRIM. The overall error in the present work is estimated to be ≤20%
Investigation of nuclear interactions around 20 TeV

Energy Technology Data Exchange (ETDEWEB)

Sato, Y [Waseda Univ., Tokyo (Japan). Science and Engineering Research Lab.; Sugimoto, H; Saito, T

1976-12-01

Nuclear interactions at a mean energy of about 20 TeV are studied by means of a nuclear emulsion chamber with jet producer. In the present analysis, particular emphasis is placed on the experimental condition. The transverse momentum spectrum of secondary ..gamma.. rays is approximated by a single exponential in a range of 0.3
V/c. The mean transverse momentum of ..pi../sup 0/ mesons is estimated to be 0.44+-0.02GeV/c. The fractional energy spectrum of ..gamma.. rays, E sub(..gamma..)/..sigma..E sub(..gamma..), in the range of 0.003

Exclusive data-based modeling of neutron-nuclear reactions below 20 MeV

Science.gov (United States)

Savin, Dmitry; Kosov, Mikhail

2017-09-01

We are developing CHIPS-TPT physics library for exclusive simulation of neutron-nuclear reactions below 20 MeV. Exclusive modeling reproduces each separate scattering and thus requires conservation of energy, momentum and quantum numbers in each reaction. Inclusive modeling reproduces only selected values while averaging over the others and imposes no such constraints. Therefore the exclusive modeling allows to simulate additional quantities like secondary particle correlations and gamma-lines broadening and avoid artificial fluctuations. CHIPS-TPT is based on the formerly included in Geant4 CHIPS library, which follows the exclusive approach, and extends it to incident neutrons with the energy below 20 MeV. The NeutronHP model for neutrons below 20 MeV included in Geant4 follows the inclusive approach like the well known MCNP code. Unfortunately, the available data in this energy region is mostly presented in ENDF-6 format and semi-inclusive. Imposing additional constraints on secondary particles complicates modeling but also allows to detect inconsistencies in the input data and to avoid errors that may remain unnoticed in inclusive modeling.
UVI ThunnderBird Cup v2.0 Workshop: Worshop Analysis 2016.

Energy Technology Data Exchange (ETDEWEB)

Lee, Wellington K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Morris, Tyler Jake [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Chu, Andrew Chun-An [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Russ, Joshua [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Emerson-Lewis, Michelle

2016-11-01

The ThunderBird Cup v2.0 (TBC2) program falls under the Minority Serving Institution Pipeline Program (MSIPP) that aims to establish a world-class workforce development, education and research program that combines the strengths of Historically Black Colleges and Universities (HBCUs) and national laboratories to create a K-20 pipeline of students to participate in cybersecurity and related fields.
A third-order KdV solution for internal solitary waves and its application in the numerical wave tank

Directory of Open Access Journals (Sweden)

Qicheng Meng

2016-04-01

Full Text Available A third-order KdV solution to the internal solitary wave is derived by a new method based on the weakly nonlinear assumptions in a rigid-lid two-layer system. The solution corrects an error by Mirie and Su (1984. A two-dimensional numerical wave tank has been established with the help of the open source CFD library OpenFOAM and the third-party software waves2Foam. Various analytical solutions, including the first-order to third-order KdV solutions, the eKdV solution and the MCC solution, have been used to initialise the flow fields in the CFD simulations of internal solitary waves. Two groups including 11 numerical cases have been carried out. In the same group, the initial wave amplitudes are the same but the implemented analytical solutions are different. The simulated wave profiles at different moments have been presented. The relative errors in terms of the wave amplitude between the last time step and the initial input have been analysed quantitatively. It is found that the third-order KdV solution results in the most stable internal solitary wave in the numerical wave tank for both small-amplitude and finite-amplitude cases. The finding is significant for the further simulations involving internal solitary waves.
Empirical formulae for mass attenuation and energy absorption coefficients from 1 keV to 20 MeV

International Nuclear Information System (INIS)

Manjunatha, H.C.; Sowmya, N.; Seenappa, L.; Sridhar, K.N.; Hanumantharayappa, C.

2017-01-01

Mass attenuation and energy absorption coefficients represents attenuation and absorption of X-rays and gamma rays in the material medium. A new empirical formula is proposed for mass attenuation and energy absorption coefficients in the region 1 < Z < 92 and from 1 keV to 20 MeV. The mass attenuation and energy absorption coefficients do not varies linearly with energy. We have performed the nonlinear regressions/nonlinear least square fittings and proposed the simple empirical relations between mass attenuation coefficients (μ/ρ) and mass energy absorption coefficients (μ en /ρ) and energy. We have compared the values produced by this formula with that of experiments. A good agreement of present formula with the experiments/previous models suggests that the present formulae could be used to evaluate mass attenuation and energy absorption coefficients in the region 1 < Z < 92. This formula is a model-independent formula and is the first of its kind that produces a mass attenuation and energy absorption coefficient values with the only simple input of energy for wide energy range 1 keV - 20 MeV in the atomic number region 1 < Z < 92. This formula is very much useful in the fields of radiation physics and dosimetry
20 GeV e+ x 400 GeV p: some synchrotron radiation considerations

International Nuclear Information System (INIS)

Humphrey, J.W.; Limon, P.J.

1977-01-01

The possibility of a 20 GeV electron ring in the 400 x 400 GeV 2 ISABELLE tunnel is considered. The conclusions that can be drawn from these considerations are: (1) much work remains to be done on the implications of synchrotron radiation for insertion design; (2) in the absence of considerations concerning insertion areas with longitudinal polarization, placing the electron ring in the same vertical plane as the electron ring is mildly favored; (3) creating insertions for longitudinally polarized electrons is difficult, and elementary considerations indicate that the synchrotron radiation flux in the insertion region will increase by a factor of approximately 100 and the luminosity may decrease by a factor of approximately 10; and (4) the creation of insertions for longitudinally polarized electrons favors placing the electron ring in the same horizontal plane as the proton ring
Ab initio I-V characteristics of short C-20 chains

DEFF Research Database (Denmark)

Roland, C.; Larade, B.; Taylor, Jeremy Philip

2002-01-01

We have calculated the I-V characteristics of short chains of C-20 molecular cages between Al and Au leads with an ab initio formalism. The results indicate that a linear chain of such molecules acts primarily as metallic nanowires. The transmission, however, depends sensitively both...
Comparison of the Roche COBAS AmpliPrep/COBAS TaqMan HIV-1 test v1.0 with v2.0 in HIV-1 viral load quantification

Directory of Open Access Journals (Sweden)

Yi-Ching Tung

2015-04-01

Full Text Available Roche modified the COBAS AmpliPrep/COBAS TaqMan human immunodeficiency virus type 1 (HIV-1 test version 1.0 (CAP/CTM v1.0, resulting in the COBAS AmpliPrep/COBAS TaqMan HIV-1 test version 2.0 (CAP/CTM v2.0. The aim of this study was to evaluate the performance of the CAP/CTM v2.0 and to compare this performance with that of the CAP/CTM v1.0. The study was conducted in a small local study group in Kaohsiung Medical University Hospital, Kaohsiung, Taiwan. A total of 86 plasma samples from HIV-1-seropositive patients were tested using the two assays. The correlation and concordance of results between the two assays were calculated. The CAP/CTM v2.0 generated higher values than did the CAP/CTM v1.0, and five samples (5.8% yielded a difference of > 1 log10 copies/mL. In addition, our data show that CAP/CTM v1.0 and CAP/CTM v2.0 yielded relatively consistent values for 23 samples with low viral loads (< 200 copies/mL. Furthermore, when viral loads were in a medium range (2–5 log10 copies/mL, the results of the two assays were more compatible. This study shows a good correlation between CAP/CTM v1.0 and v2.0 in HIV-1 viral load measurement. Further attention must be paid to those cases in which measured viral loads present larger differences between the two assays.
Investigation of error estimation method of observational data and comparison method between numerical and observational results toward V and V of seismic simulation

International Nuclear Information System (INIS)

Suzuki, Yoshio; Kawakami, Yoshiaki; Nakajima, Norihiro

2017-01-01

The method to estimate errors included in observational data and the method to compare numerical results with observational results are investigated toward the verification and validation (V and V) of a seismic simulation. For the method to estimate errors, 144 literatures for the past 5 years (from the year 2010 to 2014) in the structure engineering field and earthquake engineering field where the description about acceleration data is frequent are surveyed. As a result, it is found that some processes to remove components regarded as errors from observational data are used in about 30% of those literatures. Errors are caused by the resolution, the linearity, the temperature coefficient for sensitivity, the temperature coefficient for zero shift, the transverse sensitivity, the seismometer property, the aliasing, and so on. Those processes can be exploited to estimate errors individually. For the method to compare numerical results with observational results, public materials of ASME V and V Symposium 2012-2015, their references, and above 144 literatures are surveyed. As a result, it is found that six methods have been mainly proposed in existing researches. Evaluating those methods using nine items, advantages and disadvantages for those methods are arranged. The method is not well established so that it is necessary to employ those methods by compensating disadvantages and/or to search for a solution to a novel method. (author)
n + 2759Co(En≤20 MeV) nuclear data calculation and analysis

International Nuclear Information System (INIS)

Wang Shunuan

2006-01-01

Whole set of nuclear data calculation in ENDF/B-6 format for n + 27 59 Co (E n ≤20 MeV) has been finished by using spherical optical model, coupled channel optical model, pre-equilibrium exciton model and Hauser-Fashbach equilibrium statistical model. The calculated cross sections, angular distributions, spectrum and double differential cross sections by using codes of APOM, ECIS95 and UNF are compared with all existing experimental data for n + 27 59 Co(E n ≤20 MeV) takefrom EXFOR. The calculated results are analyzed from point of view of theoretical model and model parameters used. The work is for CENDL-3. (authors)
The Status and Promise of Advanced M&V: An Overview of “M&V 2.0” Methods, Tools, and Applications

Energy Technology Data Exchange (ETDEWEB)

Franconi, Ellen [Rocky Mountain Inst., Boulder, CO (United States); Gee, Matt [Univ. of Chicago, IL (United States); Goldberg, Miriam [DNV GL, Oslo (Norway); Granderson, Jessica [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Guiterman, Tim [EnergySavvy, Seattle, WA (United States); Li, Michael [U.S. Department of Energy (DOE), Baltimore, MD (United States); Smith, Brian Arthur [Pacific Gas and Electric, San Francisco, CA (United States)

2017-04-11

Advanced measurement and verification (M&V) of energy efficiency savings, often referred to as M&V 2.0 or advanced M&V, is currently an object of much industry attention. Thus far, however, there has been a lack of clarity about what techniques M&V 2.0 includes, how those techniques differ from traditional approaches, what the key considerations are for their use, and what value propositions M&V 2.0 presents to different stakeholders. The objective of this paper is to provide background information and frame key discussion points related to advanced M&V. The paper identifies the benefits, methods, and requirements of advanced M&V and outlines key technical issues for applying these methods. It presents an overview of the distinguishing elements of M&V 2.0 tools and of how the industry is addressing needs for tool testing, consistency, and standardization, and it identifies opportunities for collaboration. In this paper, we consider two key features of M&V 2.0: (1) automated analytics that can provide ongoing, near-real-time savings estimates, and (2) increased data granularity in terms of frequency, volume, or end-use detail. Greater data granularity for large numbers of customers, such as that derived from comprehensive implementation of advanced metering infrastructure (AMI) systems, leads to very large data volumes. This drives interest in automated processing systems. It is worth noting, however, that automated processing can provide value even when applied to less granular data, such as monthly consumption data series. Likewise, more granular data, such as interval or end-use data, delivers value with or without automated processing, provided the processing is manageable. But it is the combination of greater data detail with automated processing that offers the greatest opportunity for value. Using M&V methods that capture load shapes together with automated processing1 can determine savings in near-real time to provide stakeholders with more timely and
Zenith-angle distributions of atmospheric muons above 20 GeV

International Nuclear Information System (INIS)

Decoster, R.J.; Stevenson, M.L.; Breakstone, A.; Flatte, S.M.

1975-01-01

The results of a magnetic-spectrometer experiment at ground level with optical spark chambers, scintillator hodoscope trigger and an air-gap magnet, are reported to given an evaluation of the zenith-angle distribution of the atmospheric muons above 20 GeV. An automatic flying spot digitizer, the Hummingbird, was used
Analysis of the THAI Iod-11 and Iod-12 tests: Advancements and limitations of ASTEC V2.0R3p1 and MELCOR V2.1.4803

International Nuclear Information System (INIS)

Gonfiotti, Bruno; Paci, Sandro

2015-01-01

Highlights: • The I 2 transport in a multi-compartment vessel was analysed. • ASTEC and MELCOR codes were employed. • Same nodalisation for the code-to-code comparison. • The I 2 concentrations were quite well simulated in ASTEC. • Numerical issues on MELCOR. - Abstract: This work is related to the application of the ASTEC V2.0R3p1 and MELCOR V2.1.4803 codes to the analysis of the THAI Iod-11 and Iod-12 containment tests characterised by an iodine release. The main scope of these two tests was to investigate the steel interaction on dry and wet surfaces, with an interaction supposed to be a two-steps process: an initial faster and reversible physisorption followed by a slower, and irreversible, chemisorption of the physisorbed I 2 . The aim of the present work is to highlight advancements and limitations of the current ASTEC and MELCOR code versions respect to the older code versions employed during the European SARNET projects. The investigation was carried out as a code-to-code comparison vs. the experimental THAI data, focusing on the evaluation of the code models treating the iodine behaviour. A similar spatial nodalisation was employed for both codes. As main result, ASTEC had shown an overall good agreement compared to the iodine related experimental data while, on contrary, MELCOR had shown poor results, probably due to unsolved numerical issues and unsatisfactory iodine modellisation
Structure of recombinant Ves v 2 at 2.0 Angstrom resolution

DEFF Research Database (Denmark)

Skov, Lars K; Seppälä, Ulla; Coen, Jeremy J F

2006-01-01

Wasp venom from Vespula vulgaris contains three major allergens: Ves v 1, Ves v 2 and Ves v 5. Here, the cloning, expression, biochemical characterization and crystal structure determination of the hyaluronidase Ves v 2 from family 56 of the glycoside hydrolases are reported. The allergen...... was expressed in Escherichia coli as an insoluble protein and refolded and purified to obtain full enzymatic activity. Three N-glycosylation sites at Asn79, Asn99 and Asn127 were identified in Ves v 2 from a natural source by enzymatic digestions combined with MALDI-TOF mass spectrometry. The crystal structure...... of recombinant Ves v 2 was determined at 2.0 A resolution and reveals a central (beta/alpha)(7) core that is further stabilized by two disulfide bonds (Cys19-Cys308 and Cys185-Cys197). Based on sequence alignments and structural comparison with the honeybee allergen Api m 2, it is proposed that a conserved...
Development of 750 keV/20kW DC accelerator

International Nuclear Information System (INIS)

Bapna, S.C.; Banwari, R.; Venkateswaran, S.V.; Tripathi, Alok; Kasliwal, Apollo; Pramod, R.; Kumar, Pankaj

2001-01-01

This paper discusses development of a DC accelerator at CAT for industrial applications. This accelerator is housed in two floors; first floor having the accelerator and the ground floor is an irradiation cell. It will operate in the voltage range of 300kV to 750kV and will give maximum beam power of 20kW. The electron gun, acceleration column, focusing coil, high voltage multiplier stack, filament power supply and the control unit are housed in a 1.5 m diameter 3.2 m high pressure vessel which will be pressurized to 5.5 bar of SF 6 gas
The Effect of School-Based Exercise Practices of 9-11 Year Old Girls Students on Obesity and Health-Related Quality of Life

Science.gov (United States)

Demirci, Nevzat; Demirci, Pervin Toptas; Demirci, Erdal

2017-01-01

This study was planned to determine the effects of school-based exercise practices (SBEP) on obesity and health-related quality of life (HRQL) in 9-11 year old girls. Participants consist of girls students from 9-11 years old in two state schools in Kars. Intervention Group (n: 85) courses of games and physical activities (CGPA) and SBEP…
ASTEC V2 severe accident integral code main features, current V2.0 modelling status, perspectives

International Nuclear Information System (INIS)

Chatelard, P.; Reinke, N.; Arndt, S.; Belon, S.; Cantrel, L.; Carenini, L.; Chevalier-Jabet, K.; Cousin, F.; Eckel, J.; Jacq, F.; Marchetto, C.; Mun, C.; Piar, L.

2014-01-01

The severe accident integral code ASTEC, jointly developed since almost 20 years by IRSN and GRS, simulates the behaviour of a whole nuclear power plant under severe accident conditions, including severe accident management by engineering systems and procedures. Since 2004, the ASTEC code is progressively becoming the reference European severe accident integral code through in particular the intensification of research activities carried out in the frame of the SARNET European network of excellence. The first version of the new series ASTEC V2 was released in 2009 to about 30 organizations worldwide and in particular to SARNET partners. With respect to the previous V1 series, this new V2 series includes advanced core degradation models (issued from the ICARE2 IRSN mechanistic code) and necessary extensions to be applicable to Gen. III reactor designs, notably a description of the core catcher component to simulate severe accidents transients applied to the EPR reactor. Besides these two key-evolutions, most of the other physical modules have also been improved and ASTEC V2 is now coupled to the SUNSET statistical tool to make easier the uncertainty and sensitivity analyses. The ASTEC models are today at the state of the art (in particular fission product models with respect to source term evaluation), except for quenching of a severely damage core. Beyond the need to develop an adequate model for the reflooding of a degraded core, the main other mean-term objectives are to further progress on the on-going extension of the scope of application to BWR and CANDU reactors, to spent fuel pool accidents as well as to accidents in both the ITER Fusion facility and Gen. IV reactors (in priority on sodium-cooled fast reactors) while making ASTEC evolving towards a severe accident simulator constitutes the main long-term objective. This paper presents the status of the ASTEC V2 versions, focussing on the description of V2.0 models for water-cooled nuclear plants
SpaceCube v2.0 Space Flight Hybrid Reconfigurable Data Processing System

Science.gov (United States)

Petrick, Dave

2014-01-01

This paper details the design architecture, design methodology, and the advantages of the SpaceCube v2.0 high performance data processing system for space applications. The purpose in building the SpaceCube v2.0 system is to create a superior high performance, reconfigurable, hybrid data processing system that can be used in a multitude of applications including those that require a radiation hardened and reliable solution. The SpaceCube v2.0 system leverages seven years of board design, avionics systems design, and space flight application experiences. This paper shows how SpaceCube v2.0 solves the increasing computing demands of space data processing applications that cannot be attained with a standalone processor approach.The main objective during the design stage is to find a good system balance between power, size, reliability, cost, and data processing capability. These design variables directly impact each other, and it is important to understand how to achieve a suitable balance. This paper will detail how these critical design factors were managed including the construction of an Engineering Model for an experiment on the International Space Station to test out design concepts. We will describe the designs for the processor card, power card, backplane, and a mission unique interface card. The mechanical design for the box will also be detailed since it is critical in meeting the stringent thermal and structural requirements imposed by the processing system. In addition, the mechanical design uses advanced thermal conduction techniques to solve the internal thermal challenges.The SpaceCube v2.0 processing system is based on an extended version of the 3U cPCI standard form factor where each card is 190mm x 100mm in size The typical power draw of the processor card is 8 to 10W and scales with application complexity. The SpaceCube v2.0 data processing card features two Xilinx Virtex-5 QV Field Programmable Gate Arrays (FPGA), eight memory modules, a monitor
Negative pion-nucleus elastic scattering at 20 and 40 MeV

International Nuclear Information System (INIS)

Burleson, G.; Blanpied, G.; Cottingame, W.; Daw, G.; Park, B.; Seth, K.K.; Barlow, D.; Iversen, S.; Kaletka, M.; Nann, H.; Saha, A.; Smith, D.; Redwine, R.P.; Burger, W.; Farkhondeh, M.; Saghai, B.; Anderson, R.

1994-01-01

Differential cross sections for the elastic scattering of 20 and 40 MeV π - by nuclei ranging from 12 C to 208 Pb are reported. Comparisons are made with the predictions of the Michigan State University (MSU) optical potential
On the use of hydrogen in confined spaces: Results from the internal project InsHyde

NARCIS (Netherlands)

Venetsanos, A.G.; Adams, P.; Azkarate, I.; Bengaouer, A.; Brett, L.; Carcassi, M.N.; Engebø, A.; Gallego, E.; Gavrikov, A.I.; Hansen, O.R.; Hawksworth, S.; Jordan, T.; Kessler, A.; Kumar, S.; Molkov, V.; Nilsen, S.; Reinecke, E.; Stöcklin, M.; Schmidtchen, U.; Teodorczyk, A.; Tigreat, D.; Versloot, N.H.A.

2011-01-01

The paper presents an overview of the main achievements of the internal project InsHyde of the HySafe NoE. The scope of InsHyde was to investigate realistic small-medium indoor hydrogen leaks and provide recommendations for the safe use/storage of indoor hydrogen systems. Additionally, InsHyde
Concurrent validity and clinical utility of the HCR-20V3 compared with the HCR-20 in forensic mental health nursing: similar tools but improved method.

Science.gov (United States)

Bjørkly, Stål; Eidhammer, Gunnar; Selmer, Lars Erik

2014-01-01

The main scope of this small-scale investigation was to compare clinical application of the HCR-20V3 with its predecessor, the HCR-20. To explore concurrent validity, two experienced nurses assessed 20 forensic mental health service patients with the tools. Estimates of internal consistency for the HCR-20 and the HCR-20V3 were calculated by Cronbach's alpha for two levels of measurement: the H-, C-, and R-scales and the total sum scores. We found moderate (C-scale) to good (H- and R- scales and aggregate scores) estimates of internal consistency and significant differences for the two versions of the HCR. This finding indicates that the two versions reflect common underlying dimensions and that there still appears to be differences between V2 and V3 ratings for the same patients. A case from forensic mental health was used to illustrate similarities and differences in assessment results between the two HCR-20 versions. The case illustration depicts clinical use of the HCR-20V3 and application of two structured nursing interventions pertaining to the risk management part of the tool. According to our experience, Version 3 is superior to Version 2 concerning: (a) item clarity; (b) the distinction between presence and relevance of risk factors; (c) the integration of risk formulation and risk scenario; and (d) the explicit demand to construct a risk management plan as part of the standard assessment procedure.

Numerical Simulation of the Water Cycle Change Over the 20th Century

Science.gov (United States)

Bosilovich, Michael G.; Schubert, Siegfried D.

2003-01-01

We have used numerical models to test the impact of the change in Sea Surface Temperatures (SSTs) and carbon dioxide (CO2) concentration on the global circulation, particularly focusing on the hydrologic cycle, namely the global cycling of water and continental recycling of water. We have run four numerical simulations using mean annual SST from the early part of the 20th century (1900-1920) and the later part (1980-2000). In addition, we vary the CO2 concentrations for these periods as well. The duration of the simulations is 15 years, and the spatial resolution is 2 degrees. We use passive tracers to study the geographical sources of water. Surface evaporation from predetermined continental and oceanic regions provides the source of water for each passive tracer. In this way, we compute the percent of precipitation of each region over the globe. This can also be used to estimate precipitation recycling. In addition, we are using the passive tracers to independently compute the global cycling of water (compared to the traditional, Q/P calculation).
A technique for determining electron losses for a 20 MeV microtron

International Nuclear Information System (INIS)

Harisha, P.; Nayak, A.R.; Mehta, S.K.; Soni, H.C.; Siddappa, K.

1999-01-01

A 22 orbit, 20 MeV electron microtron is used as a preaccelerator for the 700 MeV booster synchrotron at INDUS-1, CAT, Indore. Estimation of electron losses at the RF cavity from each orbit is important in obtaining the radiation doses from the body of the microtron. Radiation mapping of the microtron can be used to estimate these loss terms as an alternate to actual measurement by using a measuring probe. (author)
Preliminary design for a 20 TeV Collider in a deep tunnel at Fermilab

International Nuclear Information System (INIS)

1985-01-01

The Reference Design Study for a 20 TeV Collider demonstrated the technical and cost feasibility of a 20 TeV superconducting collider facility. Based on magnets of 3T, 5T, and 6.5T the Main Ring of the Collider would have a circumference of 164 km, 113 km, or 90 km. There would be six collision regions, of which four would be developed intially. The 5T and 6.5T rings would have twelve major refrigeration stations, while the 3T design would have 24 major refrigeration stations
Reduction of radiation pneumonitis by V20-constraints in breast cancer

International Nuclear Information System (INIS)

Goldman, Ulla Blom; Wennberg, Berit; Svane, Gunilla; Bylund, Håkan; Lind, Pehr

2010-01-01

Adjuvant local-regional radiotherapy (LRRT) is routinely recommended for breast cancer patients. It is well known being related to pulmonary side-effects. We studied post-RT radiological changes on X-ray and CT, and correlated the findings with Quality of Life (QoL), common dosimetric factors and co-variates. The results were compared with a previously reported cohort of 137 irradiated women. 88 women underwent chest X-ray and CT pre-and 4-5 months after 3-D planned LRRT, minimizing the dose to the ipsilateral lung to V 20 < 30%. The lung field was divided into 3 regions and the development of post-RT density changes were graded (0-3). Patients with radiological changes were compared with non-responders. Clinical symptoms were registered and data on patient and treatment related co-variates were gathered prospectively. The ipsilateral lung dosimetric factors V 13 , V 20 , V 30 and mean dose were calculated and QoL was assessed before and 4 months after RT. The use of dose-volume constraints significally reduced moderate-severe radiological changes on chest X-ray compared with our earlier study (Chi square trend test: p < 0.001). Symptomatic pneumonitis was also rare in the present study. No agreement was found between CT and chest X-ray as diagnostic tools for post-RT pneumonitis. V 13 correlated independently with radiological changes on CT (logistic regression: p = 0.04; ROC area: 0.7). The Co-variates smoking habits, age, chemotherapy, endocrine or trastuzumab therapy did not influence the outcome on multivariate analysis. QoL changes in physical function, i.e. fatigue, dyspnoea were not detected but there was a trend for a worse recovery after chemotherapy in patients with high V 13 (Spearman Rank Correlation: p < 0.05). The use of dose-volume constraints significantly reduced post-RT radiological changes on chest X-ray in LRRT for BC. The lung changes on CT were also generally limited when we used this strategy and was not always picked up on chest X
Fragment emission in the interaction of xenon with 1-20 GeV protons

International Nuclear Information System (INIS)

Porile, N.T.; Bujak, A.J.; Carmony, D.D.; Chung, Y.H.; Gutay, L.J.; Hirsch, A.S.; Mahi, M.; Paderewski, G.L.; Sangster, T.C.; Scharenberg, R.P.; Stringfellow, B.C.

1989-01-01

Differential cross sections for the emission of intermediate mass fragments in the interaction of xenon with 1-20 GeV protons have been measured. The cross sections increase sharply with energy up to 10 GeV and then level off. The energy spectra were fitted with an expression based on the phase transition droplet model and excellent fits were obtained above 9 GeV. Below 6 GeV, the fits show an increasing contribution from another mechanism, believed to be binary breakup. A droplet model fit to the cross sections ascribed to the multi-fragmentation component is able to reproduce their variation with both fragment mass and proton energy
A 20 keV electron gun system for the electron irradiation experiments

International Nuclear Information System (INIS)

Mahapatra, S.K.; Dhole, S.D.; Bhoraskar, V.N.

2005-01-01

An electron gun consisting of cathode, focusing electrode, control electrode and anode has been designed and fabricated for the electron irradiation experiments. This electron gun can provide electrons of any energy over the range 1-20 keV, with current upto 50 μA. This electron gun and a Faraday cup are mounted in the cylindrical chamber. The samples are fixed on the Faraday cup and irradiated with electrons at a pressure ∼10 -7 mbar. The special features of this electron gun system are that, at any electron energy above 1 keV, the electron beam diameter can be varied from 5 to 120 mm on the Faraday cup mounted at a distance of 200 mm from the anode in the chamber. The variation in the electron current over the beam spot of 120 mm diameter is less than 15% and the beam current stability is better than 5%. This system is being used for studying the irradiation effects of 1-20 keV energy electrons on the space quality materials in which the irradiation time may vary from a few tens of seconds to hours
A 20 keV electron gun system for the electron irradiation experiments

Energy Technology Data Exchange (ETDEWEB)

Mahapatra, S.K. [Department of Physics, University of Pune, Pune 411007 (India); Dhole, S.D. [Department of Physics, University of Pune, Pune 411007 (India); Bhoraskar, V.N. [Department of Physics, University of Pune, Pune 411007 (India)]. E-mail: vnb@physics.unipune.ernet.in

2005-01-01

An electron gun consisting of cathode, focusing electrode, control electrode and anode has been designed and fabricated for the electron irradiation experiments. This electron gun can provide electrons of any energy over the range 1-20 keV, with current upto 50 {mu}A. This electron gun and a Faraday cup are mounted in the cylindrical chamber. The samples are fixed on the Faraday cup and irradiated with electrons at a pressure {approx}10{sup -7} mbar. The special features of this electron gun system are that, at any electron energy above 1 keV, the electron beam diameter can be varied from 5 to 120 mm on the Faraday cup mounted at a distance of 200 mm from the anode in the chamber. The variation in the electron current over the beam spot of 120 mm diameter is less than 15% and the beam current stability is better than 5%. This system is being used for studying the irradiation effects of 1-20 keV energy electrons on the space quality materials in which the irradiation time may vary from a few tens of seconds to hours.
Neutron cross-sections above 20 MeV for design and modeling of ...

Indian Academy of Sciences (India)

bination of a high-power, high-energy accelerator, a spallation target for neutron ... The development of the commercial critical reactors of today motivated a large effort on nuclear data up to about 20 MeV, and presently ..... facility in the world.
Inter-comparison of High Energy Files (neutron-induced, from 20 to 150 MeV)

Energy Technology Data Exchange (ETDEWEB)

Lee, Young-Ouk; Fukahori, Tokio [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1998-11-01

Recent new applications using accelerator-driven system require well-tested nuclear data when modeling the interaction of neutrons above 20 MeV. This work is aimed to review evaluation methods applied in currently available neutron high energy files above 20 to 150 MeV, to inter-compare their evaluated cross sections on some important isotopes, and to analyze resulting discrepancies. Through out these, integrities and consistencies of the high energy files are checked, applicability of physics models and evaluation methodologies are assessed, and some directions are derived to improve and expand current JENDL High Energy File. (author)
Energy dependence of multiplicity fluctuations in heavy ion collisions at 20A to 158A GeV

CERN Document Server

Alt, C.; Baatar, B.; Barna, D.; Bartke, J.; Betev, L.; Bialkowska, Helena; Blume, Christoph; Boimska, B.; Botje, Michiel; Bracinik, J.; Bramm, R.; Buncic, P.; Cerny, V.; Christakoglou, P.; Chung, P.; Chvala, O.; Cramer, J.G.; Csato, P.; Dinkelaker, P.; Eckardt, V.; Flierl, D.; Fodor, Zoltan; Foka, P.; Friese, Volker; Gal, J.; Gazdzicki, Marek; Genchev, V.; Georgopoulos, G.; Gladysz, E.; Grebieszkow, K.; Hegyi, S.; Hohne, C.; Kadija, K.; Karev, A.; Kikola, D.; Kliemant, M.; Kniege, S.; Kolesnikov, V.I.; Kornas, E.; Korus, R.; Kowalski, M.; Kraus, I.; Kreps, M.; Laszlo, A.; Lacey, Roy A.; van Leeuwen, M.; Levai, P.; Litov, Leandar; Makariev, M.; Malakhov, A.I.; Mateev, M.; Melkumov, G.L.; Mischke, A.; Mitrovski, M.; Molnar, J.; Mrowczynski, St.; Nicolic, V.; Palla, G.; Panagiotou, Apostolos D.; Panayotov, D.; Peryt, W.; Pikna, M.; Pluta, J.; Prindle, D.; Puhlhofer, F.; Renfordt, R.; Roland, C.; Roland, Gunther; Rybczynski, M.; Rybicki, A.; Sandoval, Andres; Schmitz, Norbert; Schuster, T.; Seyboth, P.; Sikler, F.; Sitar, B.; Skrzypczak, E.; Slodkowski, M.; Stefanek, Grzegorz; Stock, R.; Strabel, C.; Strobele, H.; Susa, T.; Szentpetery, I.; Sziklai, J.; Szuba, M.; Szymanski, P.; Trubnikov, V.; Utvic, M.; Varga, D.; Vassiliou, M.; Veres, G.I.; Vesztergombi, G.; Vranic, D.; Wetzler, A.; Wlodarczyk, Z.; Wojtaszek, A.; Yoo, I.K.

2008-01-01

Multiplicity fluctuations of positively, negatively and all charged hadrons in the forward hemisphere were studied in central Pb+Pb collisions at 20A, 30A, 40A, 80A and 158A GeV. The multiplicity distributions and their scaled variances $\\omega$ are presented in dependence of collision energy as well as of rapidity and transverse momentum. The distributions have bell-like shape and their scaled variances are in the range from 0.8 to 1.2 without any significant structure in their energy dependence. No indication of the critical point fluctuations are observed. The string-hadronic model UrQMD significantly overpredicts the mean, but approximately reproduces the scaled variance of the multiplicity distributions. The predictions of the statistical hadron-resonance gas model obtained within the grand-canonical and canonical ensembles disagree with the measured scaled variances. The narrower than Poissonian multiplicity fluctuations measured in numerous cases may be explained by the impact of conservation laws on f...
PLTS Transformerless Tegangan 20 kV menggunakan Cascaded H-Bridge Multilevel Inverter

Directory of Open Access Journals (Sweden)

ANGGARA BRAJAMUSTHI

2018-03-01

Full Text Available ABSTRAK Aplikasi dari inverter multilevel pada sistem Pusat Listrik Tenaga Surya (PLTS dapat menghilangkan kebutuhan terhadap transformator, sehingga dapat mengurangi biaya investasi, mengurangi kompleksitas instalasi dan menghilangkan rugi-rugi daya transformator. Pada penelitian ini, sebuah inverter dengan topologi Cascaded H-Bridge Multilevel Inverter dirancang agar mampu mengubah tegangan rendah DC dari beberapa Photovoltaic (PV array menjadi tegangan fasa-fasa 20 kV AC. Perancangan menghasilkan sebuah inverter 3 fasa 27-level dimana setiap level masing-masing memiliki PV array, DC-DC boost converter, H-bridge inverter, dan keluaran 3 fasa terhubung dengan filter LCL. Setiap komponen dari inverter dan sistem tersebut kemudian dimodelkan pada MATLAB Simulink untuk mensimulasikan kinerja dari setiap komponen dan sistem pada Standard Test Condition (STC dari modul PV. Pada keadaan STC, daya 3 fasa maksimum yang dapat dihasilkan adalah 1,716 MW atau 68,54% dari daya DC maksimum sebesar 2,5 MWp. Sistem dapat menghasilkan tegangan fasa-fasa keluaran sebesar 20 kV dengan Total Harmonic Distortion (THD di bawah 5%. Kata kunci: Pusat Listrik Tenaga Surya (PLTS, photovoltaic, Cascaded H-Bridge Multilevel Inverter ABSTRACT The application of Multilevel Inverter in a Photovoltaic Solar Power Plant system could eliminate the needs of step-up transformer, which will reduce the system investment cost, simplify the system installation and also eliminate power losses of the transformer. In this paper, an inverter design was proposed with Cascaded H-Bridge Multilevel Inverter topology that is capable of converting low voltage DC power from several PV arrays into 20 kV AC power. The design resulted a 3 phase 27-level inverter where each level in the inverter has its own photovoltaic array, DC-DC boost converter, H-bridge inverter, and the 3 phase output is connected to LCL filter. Each component of the Inverter and the system were then modelled in MATLAB
A feasibility Study: The Succinct Solver v2.0, XSB Prolog v2.6, and Flow-Logic Based Program Analysis for Carmel

DEFF Research Database (Denmark)

Pilegaard, Henrik

2003-01-01

We perform a direct comparison of the {Succinct Solver v2.0} and {XSB Prolog v2.6} based on experiments with {Control Flow Analyses} of scalable {Discretionary Ambient programs} and {Carmel programs}. To facilitate this comparison we expand ALFP clauses accepted by the Succinct Solver into more g...
RAF V Sweatman (162/2014) [2015] ZASCA 22 (20 march 2015) A ...

African Journals Online (AJOL)

RAF V Sweatman (162/2014) [2015] ZASCA 22 (20 march 2015) A simple illustration of the SCA's statutory ... Log in or Register to get access to full text downloads. ... The effect is that one of the primary purposes of the Amendment Act is ...
Study of {sup 24}Na activity in concrete using 20-MeV proton beam on Cu

Energy Technology Data Exchange (ETDEWEB)

Oranj, Leila Mokhtanri; Jung, Nam Suk; Lee, Arim; Heo, Tae Min; Bakhtian, Mahdi; Lee, Hee Seock [POSTECH, Pohang (Korea, Republic of)

2017-04-15

The number of medical cyclotrons capable of accelerating protons to about 20 MeV is increasing in Korea. In such facilities, various radionuclides could be induced in shielding materials like concrete from secondary neutrons which Causes problems from the view point of radiation safety. Among these radionuclides, gamma-ray from {sup 24}Na (Tz1/2 = 15 h) is the most important origin of radiation exposure. {sup 24}Na could be produced from secondary neutrons on Na, Al and Mg component which exist in the concrete. {sup 24} Na Could be produced from thermal neutrons on Na and fast neutron with energy lower than 20 MeV on Al and Mg. Due to interaction of 20 MeV protons on Cu target, secondary neutrons with the energy of less than 20 MeV were produced. therefore, among the concrete components, Na, Al and Mg are only corespondent to produce {sup 24}Na. In this work, {sup 24}Na activity induced in concrete and chemical reagents of concrete (NaHCO{sub 3}, Al{sub 2}O{sub 3} and MgO) were measured. To produce neutrons, Cu target was irradiated by 20 MeV protons. Measured data were compared with results of simulations by FLUKA and MARS as well as earlier works and theocratical data. In the case of Mg and Al chemical reagents, FLUKA code overestimates our measurements by approximately four times, while, for Na sample, FLUKA underestimates the experimental data by almost 0.5. Data from FLUKA and measurement for the concrete are consistent. Calculation from TALYS for Mg overestimates the measured data by a factor of 2.5.
Numerical modelling of the V-J combinations of the T cell receptor TRA/TRD locus.

Directory of Open Access Journals (Sweden)

Florence Thuderoz

2010-02-01

Full Text Available T-Cell antigen Receptor (TR repertoire is generated through rearrangements of V and J genes encoding alpha and beta chains. The quantification and frequency for every V-J combination during ontogeny and development of the immune system remain to be precisely established. We have addressed this issue by building a model able to account for Valpha-Jalpha gene rearrangements during thymus development of mice. So we developed a numerical model on the whole TRA/TRD locus, based on experimental data, to estimate how Valpha and Jalpha genes become accessible to rearrangements. The progressive opening of the locus to V-J gene recombinations is modeled through windows of accessibility of different sizes and with different speeds of progression. Furthermore, the possibility of successive secondary V-J rearrangements was included in the modelling. The model points out some unbalanced V-J associations resulting from a preferential access to gene rearrangements and from a non-uniform partition of the accessibility of the J genes, depending on their location in the locus. The model shows that 3 to 4 successive rearrangements are sufficient to explain the use of all the V and J genes of the locus. Finally, the model provides information on both the kinetics of rearrangements and frequencies of each V-J associations. The model accounts for the essential features of the observed rearrangements on the TRA/TRD locus and may provide a reference for the repertoire of the V-J combinatorial diversity.
Numerical Modelling Of The V-J Combinations Of The T Cell Receptor TRA/TRD Locus

Science.gov (United States)

Dariz, Aurélie; Baum, Thierry Pascal; Hierle, Vivien; Demongeot, Jacques; Marche, Patrice Noël; Jouvin-Marche, Evelyne

2010-01-01

T-Cell antigen Receptor (TR) repertoire is generated through rearrangements of V and J genes encoding α and β chains. The quantification and frequency for every V-J combination during ontogeny and development of the immune system remain to be precisely established. We have addressed this issue by building a model able to account for Vα-Jα gene rearrangements during thymus development of mice. So we developed a numerical model on the whole TRA/TRD locus, based on experimental data, to estimate how Vα and Jα genes become accessible to rearrangements. The progressive opening of the locus to V-J gene recombinations is modeled through windows of accessibility of different sizes and with different speeds of progression. Furthermore, the possibility of successive secondary V-J rearrangements was included in the modelling. The model points out some unbalanced V-J associations resulting from a preferential access to gene rearrangements and from a non-uniform partition of the accessibility of the J genes, depending on their location in the locus. The model shows that 3 to 4 successive rearrangements are sufficient to explain the use of all the V and J genes of the locus. Finally, the model provides information on both the kinetics of rearrangements and frequencies of each V-J associations. The model accounts for the essential features of the observed rearrangements on the TRA/TRD locus and may provide a reference for the repertoire of the V-J combinatorial diversity. PMID:20174554
Stability of a Magnetically Confined 20-KeV Steady-State Plasma; Stabilite d'un Plasma Stationnaire de 20 KeV Confine par un Champ Magnetique; Ustojchivost' 20 KehV-statsionarnoj plazmy, uderzhivaemoj magnitnym polem; Estabilidad en Regimen Estacionario de un Plasma de 20 KeV Confinado Magneticamente

Energy Technology Data Exchange (ETDEWEB)

Futch, Jr., A. H.; Damm, C. C.; Foote, J. H.; Freis, R.; Gordon, F. J.; Hunt, A. L.; Killeen, J.; Moses, K. G.; Post, R. F.; Steinhaus, J. F. [Lawrence Radiation Laboratory, Livermore, CA (United States)

1966-04-15

The stability of the steady-state 20-keV hydrogen plasma of the Livermore neutral-injection experiment ''Alice'' has been investigated in various confining magnetic fields. In a simple mirror field, observations of low-frequency oscillations and of a limitation on trapped- ion density are interpreted in terms of a low-frequency drift instability. A theoretical treatment of this instability has been made which includes the effects resulting from the finite size of the ion orbits, effects of a zero-order electric field and of unequal ion and electron densities. In the present treatment both the electric field and the magnetic field may be arbitrary functions of the spatial coordinater. As it is not in general possible to obtain analytical solutions to the resulting differential equations, the basic equations were solved numerically by finite-difference methods. These results, which agree with analytical solutions obtained in the limiting case of no zero-order electric field, are successful in explaining density and drift-frequency variations observed experimentally under conditions of finite zero-order electric field. Since the present theoretical treatment assumes the magnetic field to be an arbitrary function of r, it is possible to obtain results for fields with an initially negative gradient, which then becomes positive as the coordinate r increases. Results of such calculations are compared with experimental observations of drift stabilization achieved when line cusp fields are added to the simple mirror field. Experimentally, both dodecapole and octopole line cusps have been shown to be effective in suppressing ion losses due to the drift instability. Remaining ion losses arise solely from charge exchange with residual gas over most of the accessible density range. However, anomalous losses appear under some conditions at the highest density ({approx} 2 x 10{sup 8} ions cm{sup -3}). Correlation of small decreases in ion density with the detection of
Pulse compression system for the ANL 20 MeV linac

International Nuclear Information System (INIS)

Mavrogenes, G.; Norem, J.; Simpson, J.

1986-01-01

This paper describes the pulse compression system being built on the Argonne 20 MeV electron linac. The system is designed to rotate the bunch from the present measured pulse length of 38 psec FWHM, to pulse lengths of 5 to 6 ps with the large instantaneous currents (1 to 4 kA) possible instantaneous current. This system was necessary to extend the study of reactive fragments of molecules to the time scale of a few picoseconds, in particular to examine the chemistry of electrons and ions before and during relaxation of the surrounding media. These experiments are not sensitive to the beam energy spread, High Energy Physics experiments studying wake fields have also been proposed using the short bunches and the facility was designed so that the wake field experiment could share the beam bunching system. The 20 MeV electron linac uses a double gap, 12th subharmonic prebuncher together with a one wavelength 1.3 Ghz prebuncher to produce a single pulse of 38 ps from one occupied rf bucket. Beam emittances of 15.7 mmmr have been measured for 40 nC of accelerated charge and 8 mmmr at 10 nC. The energy spread of dE/E = 1% (FWHM) has been measured at 40 nC. Thus the accelerated beam has excellent time structure, high current, and good emittance
Multi-epoch VLBA Imaging of 20 New TeV Blazars: Apparent Jet Speeds

Science.gov (United States)

Piner, B. Glenn; Edwards, Philip G.

2018-01-01

We present 88 multi-epoch Very Long Baseline Array (VLBA) images (most at an observing frequency of 8 GHz) of 20 TeV blazars, all of the high-frequency-peaked BL Lac (HBL) class, that have not been previously studied at multiple epochs on the parsec scale. From these 20 sources, we analyze the apparent speeds of 43 jet components that are all detected at four or more epochs. As has been found for other TeV HBLs, the apparent speeds of these components are relatively slow. About two-thirds of the components have an apparent speed that is consistent (within 2σ) with no motion, and some of these components may be stationary patterns whose apparent speed does not relate to the underlying bulk flow speed. In addition, a superluminal tail to the apparent speed distribution of the TeV HBLs is detected for the first time, with eight components in seven sources having a 2σ lower limit on the apparent speed exceeding 1c. We combine the data from these 20 sources with an additional 18 sources from the literature to analyze the complete apparent speed distribution of all 38 TeV HBLs that have been studied with very long baseline interferometry at multiple epochs. The highest 2σ apparent speed lower limit considering all sources is 3.6c. This suggests that bulk Lorentz factors of up to about 4, but probably not much higher, exist in the parsec-scale radio-emitting regions of these sources, consistent with estimates obtained in the radio by other means such as brightness temperatures. This can be reconciled with the high Lorentz factors estimated from the high-energy data if the jet has velocity structures consisting of different emission regions with different Lorentz factors. In particular, we analyze the current apparent speed data for the TeV HBLs in the context of a model with a fast central spine and a slower outer layer.
Comparison of GATE/GEANT4 with EGSnrc and MCNP for electron dose calculations at energies between 15 keV and 20 MeV.

Science.gov (United States)

Maigne, L; Perrot, Y; Schaart, D R; Donnarieix, D; Breton, V

2011-02-07

The GATE Monte Carlo simulation platform based on the GEANT4 toolkit has come into widespread use for simulating positron emission tomography (PET) and single photon emission computed tomography (SPECT) imaging devices. Here, we explore its use for calculating electron dose distributions in water. Mono-energetic electron dose point kernels and pencil beam kernels in water are calculated for different energies between 15 keV and 20 MeV by means of GATE 6.0, which makes use of the GEANT4 version 9.2 Standard Electromagnetic Physics Package. The results are compared to the well-validated codes EGSnrc and MCNP4C. It is shown that recent improvements made to the GEANT4/GATE software result in significantly better agreement with the other codes. We furthermore illustrate several issues of general interest to GATE and GEANT4 users who wish to perform accurate simulations involving electrons. Provided that the electron step size is sufficiently restricted, GATE 6.0 and EGSnrc dose point kernels are shown to agree to within less than 3% of the maximum dose between 50 keV and 4 MeV, while pencil beam kernels are found to agree to within less than 4% of the maximum dose between 15 keV and 20 MeV.

Measurements of T20 in backward elastic d p scattering at deuteron momenta 3.5 - 6 GeV/c

International Nuclear Information System (INIS)

Azhgirej, L.S.; Borzunov, Yu.T.; Chernykh, E.V.

1994-01-01

We present results of measurements of the tensor analyzing power T 20 in d p backward elastic scattering at initial deuterons momenta 3.5-6.0 GeV/c, which corresponds to the range of internal momentum of the deuteron constituents k = 0.5 - 0.8 GeV/c. New structure was observed at k = 0.65 GeV/c. Difference between behavior of T 20 for d p backward elastic scattering and for breakup reaction, which have a smooth behavior of T 20 at high k, is discussed. 12 refs.; 3 figs. (author)
NONCODE v2.0: decoding the non-coding.

Science.gov (United States)

He, Shunmin; Liu, Changning; Skogerbø, Geir; Zhao, Haitao; Wang, Jie; Liu, Tao; Bai, Baoyan; Zhao, Yi; Chen, Runsheng

2008-01-01

The NONCODE database is an integrated knowledge database designed for the analysis of non-coding RNAs (ncRNAs). Since NONCODE was first released 3 years ago, the number of known ncRNAs has grown rapidly, and there is growing recognition that ncRNAs play important regulatory roles in most organisms. In the updated version of NONCODE (NONCODE v2.0), the number of collected ncRNAs has reached 206 226, including a wide range of microRNAs, Piwi-interacting RNAs and mRNA-like ncRNAs. The improvements brought to the database include not only new and updated ncRNA data sets, but also an incorporation of BLAST alignment search service and access through our custom UCSC Genome Browser. NONCODE can be found under http://www.noncode.org or http://noncode.bioinfo.org.cn.
WATERLOPP V2/64: A highly parallel machine for numerical computation

Science.gov (United States)

Ostlund, Neil S.

1985-07-01

Current technological trends suggest that the high performance scientific machines of the future are very likely to consist of a large number (greater than 1024) of processors connected and communicating with each other in some as yet undetermined manner. Such an assembly of processors should behave as a single machine in obtaining numerical solutions to scientific problems. However, the appropriate way of organizing both the hardware and software of such an assembly of processors is an unsolved and active area of research. It is particularly important to minimize the organizational overhead of interprocessor comunication, global synchronization, and contention for shared resources if the performance of a large number ( n) of processors is to be anything like the desirable n times the performance of a single processor. In many situations, adding a processor actually decreases the performance of the overall system since the extra organizational overhead is larger than the extra processing power added. The systolic loop architecture is a new multiple processor architecture which attemps at a solution to the problem of how to organize a large number of asynchronous processors into an effective computational system while minimizing the organizational overhead. This paper gives a brief overview of the basic systolic loop architecture, systolic loop algorithms for numerical computation, and a 64-processor implementation of the architecture, WATERLOOP V2/64, that is being used as a testbed for exploring the hardware, software, and algorithmic aspects of the architecture.
Conceptual Design Report. Antiproton - Proton Collider Upgrade 20 GeV Rings. Technical Components and Civil Construction May, 1988

Energy Technology Data Exchange (ETDEWEB)

None

1988-05-01

This report contains a description of the design and cost estimate of two new 20 GeV rings which will be required to support the upgrade of the Fermilab Collider with a luminosity goal of 5x10³¹ cm^-2s^-1. The new rings include an antiproton post-accumulator, denoted the Antiproton Super Booster (ASB), and a proton post-booster, denoted the Proton Super Booster (PSB). The siting of the rings is shown in Figure I-1. Both rings are capable of operation at 20 GeV, eliminating the need for ever again injecting beam into the Main Ring below transition, and significantly enhancing Main Ring performance. The Antiproton Super Booster is designed to accept and accumulate up to 4x10¹² antiprotons from the existing Antiproton Accumulator, and deliver them to the Main Ring at 20 GeV for acceleration and injection into the Collider. It is also designed to accept diluted antiprotons from the Main Ring at 20 GeV for recooling. The PSB accepts 8.9 GeV protons from the existing Booster and accelerates them to 20 GeV for injection into the Main Ring. The PSB is designed to operate at 5 Hz. The siting shown in Figure I-1 has the attractive feature that it removes all Main Ring injection hardware from the AO straight section, opening the possibility of installing a third proton-antiproton interaction region in the Tevatron Collider.
A new evaluation of neutron data for the 209Bi between 10-5 eV and 20 MeV

International Nuclear Information System (INIS)

Bersillon, O.; Caput, B.; Philis, C.A.

1982-09-01

A new evaluation of neutron induced cross-sections on 209 Bi has been completed within the full energy range 10 - 5 eV - 20 MeV and put under ENDF format. A careful study of the resonance region led to a consistent set of resonance parameters. On this basis, the tabulated cross-sections (total, elastic, capture) have been calculated using the Reich-Moore formalism. At higher energies a consistent set of optical model parameters has been obtained by fitting mainly the total cross-section between 0.7 and 150 MeV and elastic scattering angular distributions from 4 to 24 MeV. The so obtained neutron penetrabilities have been used for Hauser-Feshbach statistical model calculations which have been completed with pre-equilibrium and direct interaction components to get elastic and inelastic cross sections, angular distributions, secondary neutron spectra and gamma production. All the results are generally in good agreement with the available experimental data [fr
McSUB V2.0, an upgraded version of the Monte Carlo library McSUB with inclusion of weight factors

International Nuclear Information System (INIS)

Hoek, M.

1991-02-01

The Monte Carlo library McSUB, which was described in an earlier report, has been upgraded to McSUB V2.0. McSUB V2.0 can be used to simulate the neutron transport in a medium which is a mixture of hydrogen and carbon or a mixture of deuterium and carbon. The implemented neutron energy interval is 0.1 - 20 MeV and the library can be used to simulate elastic and inelastic scattering. The inelastic scattering with carbon takes into account the four lowest excited states of the carbon nucleus. McSUB V2.0 is downward compatible with McSUB expect for the layout of the parameter file which now contains more variables. The major upgrade has been the inclusion of routines using weight factors which has speeded up the old version considerably. McSUB V2.0 also makes a biasing technique possible. It is now possible to e.g. let a neutron scatter with a selected nucleus followed by a biased scattering direction. (au)
Angular distribution of ejected electrons from 20 keV He+ impact on He

International Nuclear Information System (INIS)

Tokoro, N.; Takenouchi, S.; Urakawa, J.; Oda, N.

1982-01-01

The angular distributions of ejected electrons in the energy range 5-70 eV have been measured at angles from 30 to 150 0 for 20 keV He + impact on He. The angular dependence of excitation cross sections of autoionisation states 2s 2 1 S and 2p 2 1 D+2s2p 1 P are in good agreement with previous data measured by Bordenave-Montesquieu et al (Phys. Rev.; A25:245 (1982)). The continuous parts of the electron spectra show symmetrical angular distributions around 90 0 in the laboratory frame for low-energy electrons (< approximately equal to 30 eV). These angular distributions are discussed in connection with the molecular autoionisation mechanism. (author)
Theoretical detection limit of PIXE analysis using 20 MeV proton beams

Science.gov (United States)

Ishii, Keizo; Hitomi, Keitaro

2018-02-01

Particle-induced X-ray emission (PIXE) analysis is usually performed using proton beams with energies in the range 2∼3 MeV because at these energies, the detection limit is low. The detection limit of PIXE analysis depends on the X-ray production cross-section, the continuous background of the PIXE spectrum and the experimental parameters such as the beam currents and the solid angle and detector efficiency of X-ray detector. Though the continuous background increases as the projectile energy increases, the cross-section of the X-ray increases as well. Therefore, the detection limit of high energy proton PIXE is not expected to increase significantly. We calculated the cross sections of continuous X-rays produced in several bremsstrahlung processes and estimated the detection limit of a 20 MeV proton PIXE analysis by modelling the Compton tail of the γ-rays produced in the nuclear reactions, and the escape effect on the secondary electron bremsstrahlung. We found that the Compton tail does not affect the detection limit when a thin X-ray detector is used, but the secondary electron bremsstrahlung escape effect does have an impact. We also confirmed that the detection limit of the PIXE analysis, when used with 4 μm polyethylene backing film and an integrated beam current of 1 μC, is 0.4∼2.0 ppm for proton energies in the range 10∼30 MeV and elements with Z = 16-90. This result demonstrates the usefulness of several 10 MeV cyclotrons for performing PIXE analysis. Cyclotrons with these properties are currently installed in positron emission tomography (PET) centers.
RECLAIM V2.0: comparison of calculated doses with other assessment tools when emulating contaminated land scenarios

International Nuclear Information System (INIS)

Willans, Mark; Galais, Nathalie; Lennon, Chris; Trivedil, Divyesh

2007-01-01

ReCLAIM v2.0 is a software tool designed to calculate doses to exposure groups from radioactively contaminated land including UK Nuclear Licensed Sites. When using tools to undertake contaminated land assessments, it is important to understand the functionality of the tool and how the tool should be best used to undertake an assessment. This work describes the results from inter-comparison of ReCLAIM v2.0 with two other radioactively contaminated land tools (Conland and RCLEA). For the majority of cases there was little difference between ReCLAIM v2.0 and the other tools. In all cases where there were significant differences, the cause of the variation could be explained and quantified. In the majority of these cases the main exposure pathway was external irradiation. In these cases, variations in the calculated doses were due to the differing ways in which underpinning shielding calculations were undertaken to calculate external radiation dose coefficients. The effect was most noticeable for radionuclides emitting high energy penetrating radiation such as Co-60, Cs-134 and Cs-137. For these cases, there was a greater difference of up to around 60% in the dose comparisons between ReCLAIM v2.0 and the alternative tools, with ReCLAIM v2.0 being more conservative. These results demonstrate that where the algorithms and parameter values are similar, different tools will produce similar results. The user of such tools should be aware of cases where different results may be produced in order that an appropriate level of confidence can be assigned when making decisions based upon the results. (authors)
Numerical simulations of heat transfer distribution of a two-pass square channel with V-rib turbulator and bleed holes

Science.gov (United States)

Kumar, Sourabh; Amano, R. S.; Lucci, Jose Martinez

2013-08-01

The blade tip region in gas turbine encounters high thermal loads due to temperature difference and hence efforts for high durability and safe operations are essential. Improved and robust methods of cooling are required to downgrade heat transfer rate to turbine blades. The blade tip regions, which are exposed to high gas flow, suffers high local thermal load which are due to external tip leakage. Jet impingement, pin cooling etc. are techniques used for cooling blades. A more usual way is to use serpentine passage with 180-degree turn. In this study, numerical simulation of heat transfer distribution of a two-pass square channel with rib turbulators and bleed holes were done. Periodical rib turbulators and bleed holes were used in the channel. The ribs arrangement were 60 degree V rib, 60 degree inverted V ribs, combination of 60 degree V rib at inlet and 60 inverted V rib at outlet section and combination of Inverted V at inlet and V rib at the outlet. The results were numerically computed using Fluent with Reynolds number of 12,500 and 28,500. Turbulence models used for computations were k-ω-SST and RSM. Temperature based and shear stress based techniques were used for heat transfer distribution prediction. The results for 60 degree V rib, 60 degree inverted V ribs were compared with the experimental results for validation of the results obtained. Detailed distribution shows distinctive peaks in heat transfer around bleed holes and rib turbulator. Comparisons of the overall performance of the models with different orientation of rib turbulator are presented. It is found that due to the combination of 60 degree inverted V rib in inlet and 60 V rib in outlet with bleed holes provides better heat treatment. It is suggested that the use of rib turbulator with bleed holes provides suitable for augmenting blade cooling to achieve an optimal balance between thermal and mechanical design requirements.
Structures in 20O from the 14C(7Li, p) reaction at 44 MeV

International Nuclear Information System (INIS)

Bohlen, H.G.; Oertzen, W. von; Kokalova, T.; Wheldon, C.; Milin, M.; Dorsch, T.; Kruecken, R.; Faestermann, T.; Mahgoub, M.; Hertenberger, R.; Wirth, H.F.

2011-01-01

We have studied the multi-nucleon transfer reaction 14 C( 7 Li, p) at E Lab ( 7 Li) = 44 MeV populating states of the neutron-rich oxygen isotope 20 O. The experiments have been performed at the Munich Tandem accelerator using the high-resolution Q3D magnetic spectrometer, with an overall energy resolution of 45keV. States were populated up to 20MeV excitation energy -65 states have been identified in the analysis, among which 42 are new. Rotational bands are proposed in terms of underlying intrinsic reflection-asymmetric cluster and prolate molecular structures (namely 14 C x 2n x α) as parity doublet bands. A rectangular oblate structure is suggested for some very narrow states at high excitation energies. (orig.)
Study of inclusive proton spectra from 20 MeV deuteron breakup by bismuth

International Nuclear Information System (INIS)

Badiger, N.M.; Hallur, B.R.; Madhusoodhanan, T.; Sathyavathiamma, M.P.; Puttaswamy, N.G.; Darshan, V.P.; Sharma, H.; Chintalapudi, S.N.

1997-01-01

The breakup of deuteron into proton and neutron has been studied earlier to understand the breakup mechanism. Inclusive measurements show the expected broad bumps near the beam velocity. In the present experiment, the breakup of 20 MeV deuterons by bismuth target has been investigated
Analysis of the experimental data on carbon-neutron interactions for energy below 20MeV

International Nuclear Information System (INIS)

Haouat, G.; Lachkar, J.; Patin, Y.; Sigaud, J.; Cocu, F.

1975-01-01

An evaluation of the neutron-induced cross sections of carbon has been completed for the energy region 10 -4 eV to 20MeV. The recommended data are based on experiments, some of them being done in this laboratory. Energy and angular distributions of secondary neutrons and photons are included. The adopted values are discussed [fr
Evaluation of the capture cross section of natural Ti from 10-5eV to 20.106eV

International Nuclear Information System (INIS)

Simon, G.; Bersillon, O.; Mosinski, G.; Philis, C.; Trochon, J.; Verges, N.

1977-01-01

In the 10 -5 eV - 200 keV energy range a coherent resolved resonance parameter set has been determined for each titanium isotope. From these sets the titanium capture cross section has been calculated with the Reich-Moore formalism and corrected for the missing resonances. From 200 keV up to 20 MeV all the isotopic cross sections were calculated with the help of two statistical model codes NCNR and FISPRO. These calculations have been adjusted on available 50 Ti(n,γ) 51 Ti and Ti(n,γ) experimental results. The elemental titanium capture cross section has been obtained as the weighted sum of the isotopic cross sections. The present evaluation is descriptive of the experimental values. The comparison of the present evaluation with ENDF/BIV shows the ameliorations brought in this cross section: a better description of all the resonances known in the 1 keV - 200 keV energy range; above 200 keV the new data give a more realistic shape showing compound nucleus competition of prominent inelastic scattering channels. As titanium is used as structural material for fast reactors the capture cross section integrals for the two evaluations in different energy ranges are compared. These comparisons show considerable discrepancies in some areas. Thus the new evaluation may change the results of reactor calculations
High Current, Low Voltage Power Converter [20kA, 6V] LHC Converter Prototype

CERN Document Server

Jørgensen, H E; Dupaquier, A; Fernqvist, G

1998-01-01

The superconducting LHC accelerator requires high currents (~12.5kA) and relatively low voltages (~10 V) for its magnets. The need to install the power converters underground is the driving force for reduced volume and high efficiency. Moreover, the LHC machine will require a very high level of performance from the power converters, particularly in terms of DC stability, dynamic response and also in matters of EMC. To meet these requirements soft-switching techniques will be used. This paper describes the development of a [20kA,6V] power converter intended as a stable high-current source for D CCT calibration and an evaluation prototype for the future LHC converters. The converter is made with a modular concept with five current sources [4kA,6V] in parallel. The 4kA sources are built as plu g-in modules: a diode rectifier on the AC mains with a damped L-C passive filter, a Zero Voltage Switching inverter working at 20 kHz and an output stage (high frequency transformers, Schottky rectifi ers and output filter...
Microdosimetry of 0.5 to 2.0 MeV electron beams

International Nuclear Information System (INIS)

Braby, L.A.; Roesch, W.C.

1980-08-01

The energy imparted in microscopic volumes by electron beams with initial energies from 0.5 to 2.0 MeV has been measured at various depths in plastic. The problems associated with measuring energy deposition spectra of low LET radiations are serious, but the potential importance of these measurements in radiation biophysics justifies the effort required to obtain them. Recent results obtained by Goodhead et al. indicate an RBE greater than 2 for 0.3 keV x-rays compared to 250 kV x-rays, and our results with Chlamydomonas reinhardi indicate an RBE of 1.6 for a 1.5 MeV electron beam at a depth of 400 gm/cm 2 in lucite compared to the same beam at the surface. Development of a theory which appears to explain these results in terms of the microscopic distribution of energy deposition has motivated a detailed study of energy deposition spectra for an electron beam attenuated by various thicknesses of lucite. Simulated sites from 0.5 to 1.9 μm in diameter were studied. The values of anti y determined in these single event measurements compare favorably with those calculated from direct measurements of z reported previously. As expected, the means of the distributions increase significantly with increasing depth in an absorber
Giant metal sputtering yields induced by 20-5000 keV/atom gold clusters

International Nuclear Information System (INIS)

Andersen, H.H.; Brunelle, A.; Della-Negra, S.; Depauw, J.; Jacquet, D.; Le Beyec, Y.

1997-01-01

Very large non-linear effects have been found in cluster-induced metal sputtering over a broad projectile energy interval for the first time. Recently available cluster beams from tandem accelerators have allowed sputtering yield measurements to be made with Au 1 to Au 5 from 20 keV/atom to 5 MeV/atom. The cluster-sputtering yield maxima were found at the same total energy but not at the same energy/atom as expected. For Au 5 a yield as high as 3000 was reached at 150 keV/atom while the Au 1 yield was only 55 at the same velocity. The Sigmund-Claussen thermal spike theory, which fits published data at low energy, cannot reproduce our extended new data set. (author)
Evaluation of the Reference Numerical Parameters of the Monthly Method in ISO 13790 Considering S/V Ratio

Directory of Open Access Journals (Sweden)

Hee-Jeong Kwak

2015-01-01

Full Text Available Many studies have investigated the accuracy of the numerical parameters in the application of the quasi steady-state calculation method. The aim of this study is to derive the reference numerical parameters of the ISO 13790 monthly method by reflecting the surface-to-volume (S/V ratio and the characteristics of the structures. The calculation process was established, and the parameters necessary to derive the reference numerical parameters were calculated based on the input data prepared for the established calculation processes. The reference numerical parameters were then derived through regression analyses of the calculated parameters and the time constant. The parameters obtained from an apartment building and the parameters of the international standard were both applied to the Passive House Planning Package (PHPP and EnergyPlus programs, and the results were analyzed in order to evaluate the validity of the results. The analysis revealed that the calculation results based on the parameters derived from this study yielded lower error rates than those based on the default parameters in ISO 13790. However, the differences were shown to be negligible in the case of high heat capacity.
Condition based maintenance of a 20 kV-PE/XLPE-insulated cable network using the IRC-Analysis; Zustandsorientierte Instandhaltung eines polymerisolierten 20-kV-Kabelnetzes mit der IRC-Analyse. Moderne Diagnostik reduziert Stoerungsrate

Energy Technology Data Exchange (ETDEWEB)

Hoff, G.; Kranz, H.G. [BUGH Wuppertal (Germany). Labs. fuer Hochspannungstechnik; Beigert, M.; Petzold, F. [Seba Dynatronic Mess- und Ortungstechnik GmbH, Baunach (Germany); Kneissl, C. [Bereich Konzeption und Messtechnik, Lech Elektrizitaetswerke AG, Augsburg (Germany)

2001-10-22

For a preventive maintenance of a polymer insulated cable network a destruction free estimation of the status of the buried PE/XLPE-cables is needed. This contribution presents a condition based maintenance concept which is based on the IRC-Analysis. With this concept a major German utility was able to reduce the amount of failures in a part of the 20kV-cable network. The general tendency of increasing faults was broken. (orig.) [German] Die praeventive Instandhaltung in polymerisolierten Kabelnetzen setzt eine zerstoerungsfreie Zustandbestimmung von gelegten PE/VPE-isolierten Kabeln voraus. Die-Verfasser beschreiben ein zustandsorientiertes Wartungskonzept auf Basis der IRC-Analyse, mit dem es gelungen ist, in einem Teil des 20-kV-Kabelnetzes eines Energieversorgers die in der Vergangenheit stetig steigende Stoerungsrate drastisch zu reduzieren. (orig.)
Comparison of Bonner sphere responses calculated by different Monte Carlo codes at energies between 1 MeV and 1 GeV – Potential impact on neutron dosimetry at energies higher than 20 MeV

CERN Document Server

Rühm, W; Pioch, C; Agosteo, S; Endo, A; Ferrarini, M; Rakhno, I; Rollet, S; Satoh, D; Vincke, H

2014-01-01

Bonner Spheres Spectrometry in its high-energy extended version is an established method to quantify neutrons at a wide energy range from several meV up to more than 1 GeV. In order to allow for quantitative measurements, the responses of the various spheres used in a Bonner Sphere Spectrometer (BSS) are usually simulated by Monte Carlo (MC) codes over the neutron energy range of interest. Because above 20 MeV experimental cross section data are scarce, intra-nuclear cascade (INC) and evaporation models are applied in these MC codes. It was suspected that this lack of data above 20 MeV may translate to differences in simulated BSS response functions depending on the MC code and nuclear models used, which in turn may add to the uncertainty involved in Bonner Sphere Spectrometry, in particular for neutron energies above 20 MeV. In order to investigate this issue in a systematic way, EURADOS (European Radiation Dosimetry Group) initiated an exercise where six groups having experience in neutron transport calcula...

Ultrasonic wave propagation in real-life austenitic V-butt welds: Numerical modeling and validation

International Nuclear Information System (INIS)

Hannemann, R.; Marklein, R.; Langenberg, K. J.; Schurig, C.; Koehler, B.; Walte, F.

2000-01-01

In nondestructive testing the evaluation of austenitic steel welds with ultrasound is a commonly used method. But, since the wave propagation, scattering, and diffraction effects in such complicated media are hardly understood, computer simulations are very helpful to increase the knowledge of the physical phenomena in such samples. A particularly powerful numerical time domain modeling tool is the well established Elastodynamic Finite Integration Technique (EFIT). Recently, EFIT has been extended to simulate elastic waves in inhomogeneous anisotropic media. In this paper, the step-by-step evaluation of ultrasonic wave propagation in inhomogeneous anisotropic media will be described and the results will be validated against measurements. As a simplified model, a V-butt weld with perpendicular grain structure is investigated. The coincidence between the B Scans of the simulation and the measurement of an idealized V-butt weld is remarkable and even effects predicted by theory and simulation - the appearance of two coupled quasi-SV waves - can be observed. As a next step, an improved and more realistic model of the grain orientation inside the V-butt weld is introduced. This model has been implemented in the EFIT code and has been validated against measurements. For this verification, measured and simulated B-Scans for a real-life V-butt weld have been compared and a significant coincidence has been observed. Furthermore, the main pulses in the B-Scans are interpreted by analyzing the snapshot-movies of the wavefronts
Neutral strange-particle production in anti p 20Ne reactions at 607 MeV/c

International Nuclear Information System (INIS)

Balestra, F.; Bussa, M.P.; Busso, L.; Fava, L.; Ferrero, L.; Panzieri, D.; Piragino, G.; Tosello, F.; Bendiscioli, G.; Rotondi, A.; Salvini, P.; Zenoni, A.; Batusov, Yu.A.; Falomkin, I.V.; Pontecorvo, G.B.; Sapozhnikow, M.G.; Tretyak, V.I.; Guaraldo, C.; Maggiora, A.; Haatuft, A.; Halsteinslid, A.; Myklebost, K.; Olsen, J.M.; Breivik, F.O.; Jacobsen, T.; Soerensen, S.O.

1987-01-01

The Λ 0 and K 0 s production cross sections have been measured at 607 MeV/c for the reaction anti p + 20 Ne → V 0 + X (V 0 = Λ 0 , K s 0 ). The Λ 0 /K s 0 production ratio is found to be (2.3 ± 0.7). The data are consistent with an evaporative character of the emission mechanism from a multinucleon system for Λ 0 and from one nucleon K s 0 . The rapidity distributions of negative tracks in K s 0 events are different from those in Λ 0 events and events without V 0 . (orig.)
Improvement the Capacity of Cockcroft-Walton High Voltage Source from 300 kV/20 mA to 500 kV/20 mA for Accelerating Voltage of Electron Beam Machine

International Nuclear Information System (INIS)

Suprapto; Djasiman

2002-01-01

The improvement capacity of Cockcroft-Walton high voltage source from 300 kV/20 mA to 500 kV/mA has been carrying out. To improve the capacity of high voltage source was done by means of increasing the stage number of voltage multiplier from 11 to 18 and its output voltage measuring resistance. Each stage of voltage multiplier consists of 2 capacitors and 2 circuits of high voltage diode. This voltage multiplier is constructed using main components of high voltage capacitor and high voltage diode each of 0.22 μF/50 kV and UF 5408 respectively. To avoid stray discharge and corona it was provided with high voltage electrode and corona ring. The test result indicated that the output voltage obtained from 16 stages was 350 kV according to operating condition of 25 MΩ resistive load and first stage voltage of 28.5 kV with oscillator frequency of 24 Hz. That condition requires anode voltage and current of 5.5 kV and 2.5 A respectively. The no load test for 16 stages indicates 400 kV of output voltage and 28.5 kV first stage voltage. Efficiency of high voltage source was 48 % at 6.75 kW of output power. The expected test of 500 kV with 18 stages of voltage multiplier can not be carried out because of some restrictive of loading system. From the test result can be predicted that the output voltage of 500 kV with 18 stages of voltage multiplier requires 31.2 kV of first stage voltage. Then the expected high voltage source of Cockcroft-Walton is capable as accelerating voltage source for Electron Beam Machine with energy of 500 kV. (author)
Three-dimensional numerical simulation of the 20 June 1991, Orlando microburst

Science.gov (United States)

Proctor, Fred H.

1992-01-01

On 20 June 1991, NASA's Boeing 737, equipped with in-situ and look-ahead wind-shear detection systems, made direct low-level penetrations (300-350 m AGL) through a microburst during several stages of its evolution. This microburst was located roughly 20 km northeast of Orlando International Airport and was monitored by a Terminal Doppler Weather Radar (TDWR) located about 10 km south of the airport. The first NASA encounter with this microburst (Event 142), at approximately 2041 UTC, was during its intensification phase. At flight level, in-situ measurements indicated a peak 1-km (averaged) F-factor of approximately 0.1. The second NASA encounter (Event 143) occurred at approximately 2046 UTC, about the time of microburst peak intensity. It was during this penetration that a peak 1-km F-factor of approximately 17 was encountered, which was the largest in-situ measurement of the 1991 summer deployment. By the third encounter (Event 144), at approximately 2051 UTC, the microburst had expanded into a macroburst. During this phase of evolution, an in-situ 1-km F-factor of 0.08 was measured. The focus of this paper is to examine this microburst via numerical simulation from an unsteady, three-dimensional meteorological cloud model. The simulated high-resolution data fields of wind, temperature, radar reflectivity factor, and precipitation are closely examined so as to derive information not readily available from 'observations' and to enhance our understanding of the actual event. Characteristics of the simulated microburst evolution are compared with TDWR and in-situ measurements.
Experimental and numerical assessment of ignition delay period for pure diesel and biodiesel B20

Science.gov (United States)

Aldhaidhawi, Mohanad; Brabec, Marek; Lucian, Miron; Chiriac, Radu; Bădescu, Viorel

2017-10-01

The ignition delay period for a compression ignition engine fueled alternatively with pure diesel and with biodiesel B20 has been experimentally and numerically investigated. The engine was operated under full load conditions for two speeds, 1400 rpm speed for maximum brake torque and 2400 rpm speed for maximum brake power. Different parameters suggested as important to define the start of combustion have been considered before the acceptance of a certain evaluation technique of ignition delay. Correlations between these parameters were analyzed and concluded about the best method to identify the start of combustion. The experimental results were further compared with the ignition delay predicted by some correlations. The results showed that the determined ignition delays are in good agreement with those of the Arrhenius type expressions for pure diesel fuel, while for biodiesel B20 the correlation results are significantly different than the experimental results.
Correlation between the pain numeric rating scale and the 12-item WHO Disability Assessment Schedule 2.0 in patients with musculoskeletal pain.

Science.gov (United States)

Saltychev, Mikhail; Bärlund, Esa; Laimi, Katri

2018-03-01

The aim of this study was to assess the correlation between pain severity measured on a numeric rating scale and restrictions of functioning measured with the WHO Disability Assessment Schedule (WHODAS 2.0). This was a cross-sectional study of 1207 patients with musculoskeletal pain conditions. Correlation was assessed using Spearman's and Pearson tests. Although all the Spearman's rank correlations between WHODAS 2.0 items and pain severity were statistically significant, they were mostly weak, with only a few moderate associations for 'S2 household responsibilities', 'S8 washing', 'S9 dressing', and 'S12 day-to-day work'. The correlation between the WHODAS 2.0 total score and pain severity was also moderate: 0.41 [95% confidence interval (CI): 0.36-0.45] for average pain and 0.42 (95% CI: 0.37-0.46) for worst pain. The correlation between the WHODAS 2.0 total score and pain level was also assessed using Pearson's product-moment correlation, yielding figures that were similar to Spearman's correlation: 0.42 (Pcorrelation between pain severity measured by numeric rating scale and functioning level measured by WHODAS 2.0 was weak to moderate, with slightly stronger associations in physical domains of functioning.
Photonuclear and Radiation Effects Testing with a Refurbished 20 MeV Medical Electron Linac

CERN Document Server

Webb, Timothy; Beezhold, Wendland; De Veaux, Linda C; Harmon, Frank; Petrisko, Jill E; Spaulding, Randy

2005-01-01

An S-band 20 MeV electron linear accelerator formerly used for medical applications has been recommissioned to provide a wide range of photonuclear activation studies as well as various radiation effects on biological and microelectronic systems. Four radiation effect applications involving the electron/photon beams are described. Photonuclear activation of a stable isotope of oxygen provides an active means of characterizing polymer degradation. Biological irradiations of microorganisms including bacteria were used to study total dose and dose rate effects on survivability and the adaptation of these organisms to repeated exposures. Microelectronic devices including bipolar junction transistors (BJTs) and diodes were irradiated to study photocurrent from these devices as a function of peak dose rate with comparisons to computer modeling results. In addition, the 20 MeV linac may easily be converted to a medium energy neutron source which has been used to study neutron damage effects on transistors.
Neutron emission cross sections on 93Nb at 20 MeV incident energy

International Nuclear Information System (INIS)

Marcinkowski, A.; Kielan, D.

1991-01-01

Over the last years fully quantum-mechanical theories of nuclear reactions have been developed that provide, at least in principle, parameter-free methods of calculating double-differential continuum cross sections. The DWBA-based theory of direct processes to the continuum was derived by Tamura et al. The statistical theory of Feshback, Kerman and Koonin (FKK) introduced two reaction types in parallel as complementary mechanisms contributing to the preequilibrium decay. The multistep compound mechanism (MSC) results in symmetric angular distributions of the emitted particles, whereas the multistep direct mechanism (MSD) gives rise to the forward-peaked angular distributions. The theories of the MSC reactions differ in that the FKK theory incorporates the ''never come back'' hypothesis, which allowed the formulation of an applicable model that was successfully used in practical calculations. On the other hand the FKK theory of the MSD reactions differs conceptually from the theory of Tamura et al. and from the more general theory developed most recently by Nishioka et al. The latter theories were shown to be founded upon a postulated chaos located in the residual nucleus. In contrast, the theory of FKK assumes a chaotic interaction of the continuum particle to be emitted with the residual nucleus. The continuum or leading-particle statistics of the FKK theory results in the simple, convolution like, MSD cross section formula, which facilitates numerical calculations. Nevertheless two-step statistical DWBA calculations have been also performed. This paper extends the application of the FKK theory to the 93 Nb(n,xn) reaction at 20 MeV incident energy. (author). 14 refs, 1 fig
ATLAS event at 13 TeV - 20 May 2015 - Run 265532 Evt 3280065

CERN Multimedia

ATLAS Collaboration

2015-01-01

Display of a proton-proton collision event recorded by ATLAS on 20 May 2015, at 13 TeV collision energy. Tracks are reconstructed from hits in the outer parts of the inner tracking detector which were switched on at the time. The green and red bars indicate energy deposits in the Liquid Argon and Scintillating Tile calorimeters respectively.
Automated Transportation Management System (ATMS) V2.0 logistics module PBI acceptance criteria

International Nuclear Information System (INIS)

Weidert, R.S.

1995-01-01

This document defines the acceptance criteria for the Automated Transportation Management System V2.0 Logistics Module Performance Based Incentive (PBI). This acceptance criteria will be the primary basis for the generation of acceptance test procedures. The purpose of this document is to define the minimum criteria that must be fulfilled to guarantee acceptance of the Logistics Module
Uralic numerals : is the evolution of numeral system reconstructable? : (Reading new Václav Balzhek's book on numerals in Eurasia) / Vladimir Napolskich

Index Scriptorium Estoniae

Napolskich, Vladimir

2003-01-01

Rmt.: Balzhek, Václav. Numerals. Comparative-etymological analyses of numeral systems and their implications (saharan, nubian, egyptian, berber, kartvelian, ralic, altaic and indo-european languages). Brno, 1999. (Spisy Masarykovy Univerzity v Brné. Filozofická fakulta; 322). Ülevaade uurali keelte arvsõnu käsitlevast osast
Measurement of the fission cross section of uranium-235 between 4 eV and 20 keV; Mesure de la section efficace de fission de l'uranium-235 entre 4 eV et 20 keV

Energy Technology Data Exchange (ETDEWEB)

Michaudon, A; Genin, R; Joly, R; Vendryes, G

1959-01-01

The neutron fission cross section of uranium-235 has been measured between 4 ev and 20 kev by the time of flight method with the Saclay electron linear accelerator as a pulsed neutron source. After a brief description of the experimental apparatus and the conditions of work during the experiment, the curve {sigma}{sub F} {radical}E in the energy range studied is shown. This curve is then analyzed by the ''area'' method and a set of {sigma}{sub 0} {gamma}{sub F} values is obtained. With {sigma}{sub 0} {gamma} values measured in other laboratories, it is possible to compute fission widths for several resonances and to study their distribution. This distribution is then compared to Porter-Thomas distributions with different values of the number of exit channels. (authors) [French] La section efficace de fission de l'uranium--235 a ete mesuree entre 4 eV et 20 KeV par la methode du temps de vol en utilisant l'accelerateur lineaire a electrons de Saclay comme source pulses de neutrons. Apres une rapide description de l'appareillage experimental et des conditions de fonctionnement au cours de l'experience, on presente la courbe {sigma}{sub F} {radical}E obtenue dans la game d'energie etudiee. Cette courbe est ensuite analysee par la methode de surface des resonances et un lot de valeurs de {sigma}{sub 0} {gamma}{sub F} est obtenue. Conjuguee avec les valeurs de {sigma}{sub 0} {gamma} obtenues dans d'autres laboratoires, cette analyse permet de calculer les largeurs de fission pour plusieurs resonances et d'etudier leur distribution. Cette distribution est ensuite comparee aux distributions de Porter et Thomas correspondant a differentes valeurs du nombre de voies de sortie. (auteurs)
MetaPIGA v2.0: maximum likelihood large phylogeny estimation using the metapopulation genetic algorithm and other stochastic heuristics.

Science.gov (United States)

Helaers, Raphaël; Milinkovitch, Michel C

2010-07-15

The development, in the last decade, of stochastic heuristics implemented in robust application softwares has made large phylogeny inference a key step in most comparative studies involving molecular sequences. Still, the choice of a phylogeny inference software is often dictated by a combination of parameters not related to the raw performance of the implemented algorithm(s) but rather by practical issues such as ergonomics and/or the availability of specific functionalities. Here, we present MetaPIGA v2.0, a robust implementation of several stochastic heuristics for large phylogeny inference (under maximum likelihood), including a Simulated Annealing algorithm, a classical Genetic Algorithm, and the Metapopulation Genetic Algorithm (metaGA) together with complex substitution models, discrete Gamma rate heterogeneity, and the possibility to partition data. MetaPIGA v2.0 also implements the Likelihood Ratio Test, the Akaike Information Criterion, and the Bayesian Information Criterion for automated selection of substitution models that best fit the data. Heuristics and substitution models are highly customizable through manual batch files and command line processing. However, MetaPIGA v2.0 also offers an extensive graphical user interface for parameters setting, generating and running batch files, following run progress, and manipulating result trees. MetaPIGA v2.0 uses standard formats for data sets and trees, is platform independent, runs in 32 and 64-bits systems, and takes advantage of multiprocessor and multicore computers. The metaGA resolves the major problem inherent to classical Genetic Algorithms by maintaining high inter-population variation even under strong intra-population selection. Implementation of the metaGA together with additional stochastic heuristics into a single software will allow rigorous optimization of each heuristic as well as a meaningful comparison of performances among these algorithms. MetaPIGA v2.0 gives access both to high
Rotation harmonics for a numerical diatomic potential

International Nuclear Information System (INIS)

Kobeissi, H.; Korek, M.

1983-01-01

The problem of the determination of the rotation harmonics phi 1 , phi 2 , ... for the case of a numerical diatomic potential is considered. These harmonics defined in a recent work by psisub(vJ) = psisub(vO) + lambda 2 phi 2 + ... (where psisub(vJ) is the wave function of the vibration level v and the rotation level J, and lambda = J(J+1)) are studied for the case of the Dunham potential and for a numerical potential defined by the coordinates of its turning points with polynomial interpolations and extrapolations. It is proved that the analytical expressions of the harmonics phi 1 , phi 2 , ... reduce to polynomials where the coefficients are simply related to those of the potential in the case of the Dunham potential, and to the coordinates of the turning points in the case of the numerical potential. The numerical application is simple. The examples presented show that the vibration-rotation wave function psisub(vJ) calculated by using two harmonics only is ''exact'' up to eight significant figures
Numerical simulation of electrons dynamics in a microtron on 6 - 10 MeV

Science.gov (United States)

Bashmakov, Y. A.; Dyubkov, V. S.; Lozeev, Y. Y.

2017-12-01

Electron dynamics in 6.5 MeV classic microtron of the Lebedev Physics Institute (LPI) is investigated by means of numerical methods. Particular emphasis is placed on the formation mechanism of electron bunches at the first circular orbits. An effect of microtron main parameters such as accelerating RF field amplitude, DC magnetic field, as well as a geometry and a position of a thermal emitter on characteristics of electron beam extracted from the microtron are studied. In the space of mentioned parameters a region corresponding an optimal microtron operation mode is found. It is noted that the unique geometric and energy characteristics of accelerated beam makes use of microtron attractive not only as injector into a synchrotron, but also as a driver in experiments on generation of coherent terahertz electromagnetic radiation.
Angular distribution of ejected electrons from 20 keV He/sup +/ impact on He

Energy Technology Data Exchange (ETDEWEB)

Tokoro, N.; Takenouchi, S.; Urakawa, J.; Oda, N. (Tokyo Inst. of Tech. (Japan). Research Lab. of Nuclear Reactor)

1982-10-28

The angular distributions of ejected electrons in the energy range 5-70 eV have been measured at angles from 30 to 150/sup 0/ for 20 keV He/sup +/ impact on He. The angular dependence of excitation cross sections of autoionisation states 2s/sup 2/ /sup 1/S and 2p/sup 2/ /sup 1/D+2s2p /sup 1/P are in good agreement with previous data measured by Bordenave-Montesquieu et al (Phys. Rev.; A25:245 (1982)). The continuous parts of the electron spectra show symmetrical angular distributions around 90/sup 0/ in the laboratory frame for low-energy electrons (V). These angular distributions are discussed in connection with the molecular autoionisation mechanism.
Measurement of the energy spectrum with proportional counters with spherical cathodes between 20 keV and 2.5 MeV with the propagation of 14 MeV neutrons in liquid nitrogen and liquid air

International Nuclear Information System (INIS)

Schneider-Kuehnle, P.

1974-01-01

This work deals with the measurement of the energy spectrum of a 14 MeV neutron source in liquid nitrogen and liquid air in the energy region of 20 keV to 2.5 MeV as a function of the distance from the source. The measured results together with those of a scintispectrometer which measures the energies between 2.5 MeV and 14 MeV, are to serve as experimentally-supported input data for shielding calculations and are to enable the checking of transport theoretical calculations. (orig./LH) [de
Proceedings of V International Seminar and V National Workshop 'Use and development of products isotopic health industry'. 20th anniversary CENTIS

International Nuclear Information System (INIS)

2016-01-01

At the Salon Copa Room. Hotel Habana Riviera Took place the V International Seminar and V National Workshop 'Use and development of products isotopic health industry' for the 20th anniversary CENTIS. The event was organized by the Isotope Center. Some 200 domestic and foreign experts debated topics related to the development and production of radiopharmaceuticals in Cuba and the world, its therapeutic applications in certain tumors, and quality management systems in nuclear medicine. (author)
Complete neutronic nuclear data evaluation for 85Rb and 87Rb from 10-5 eV to 20 MeV

International Nuclear Information System (INIS)

Simon, Gerard; Prince, Augustus; Lalie, Evelyne.

1981-04-01

The total, elastic, inelastic, capture, (n,p), (n,d), (n,t), (n, 3 He), (n,α), (n,2n), (n,n'p), (n,n'α) cross-sections have been evaluated for 85 Rb and 87 Rb in the 10 -5 eV - 20 MeV energy range. This evaluation is based on available experimental data and theoretical calculations carried out in the framework of spherical optical model and statistical model. Angular distributions for elastic and discret inelastic scattering, and energy distributions for continuum inelastic scattering and for (n,2n) reaction have also been calculated. This evaluation, set under ENDF/BIV format, completes and plainly improves the corresponding evaluation given in the ENDF/BIV files [fr
RBE comparison between rapid electrons of 20 MeV and 45 MeV with survival rate, DNA synthesis, DNA reparation and nucleoid sedimentation

International Nuclear Information System (INIS)

Alth, G.; Weniger, P.; Turtzer, K.; Klein, W.; Kocsis, F.; Krankenhaus der Stadt Wien-Lainz; Oesterreichisches Forschungszentrum Seibersdorf G.m.b.H. Inst. fuer Biologie)

1982-01-01

In order to find out possible differences of the biologic efficacy of rapid electrons of different energies, the authors examined the influence of rapid electrons of 20 MeV and 45 MeV upon the survival rate of Hela cells S3, their cell growth, DNA synthesis, DNA reparation, and sedimentation of nucleoids. The results show a difference only for the nucleoid sedimentation, i.e. there are more fractured DNA cords after 45 MeV irradiation. No significant differences could be demonstrated for the parameters of the survival curve, DNA synthesis and DNA reparation. Four double tests were carried out corresponding to the indicated types of examination. (orig.) [de

Adapting the SpaceCube v2.0 Data Processing System for Mission-Unique Application Requirements

Science.gov (United States)

Petrick, David; Gill, Nat; Hasouneh, Munther; Stone, Robert; Winternitz, Luke; Thomas, Luke; Davis, Milton; Sparacino, Pietro; Flatley, Thomas

2015-01-01

The SpaceCube (sup TM) v2.0 system is a superior high performance, reconfigurable, hybrid data processing system that can be used in a multitude of applications including those that require a radiation hardened and reliable solution. This paper provides an overview of the design architecture, flexibility, and the advantages of the modular SpaceCube v2.0 high performance data processing system for space applications. The current state of the proven SpaceCube technology is based on nine years of engineering and operations. Five systems have been successfully operated in space starting in 2008 with four more to be delivered for launch vehicle integration in 2015. The SpaceCube v2.0 system is also baselined as the avionics solution for five additional flight projects and is always a top consideration as the core avionics for new instruments or spacecraft control. This paper will highlight how this multipurpose system is currently being used to solve design challenges of three independent applications. The SpaceCube hardware adapts to new system requirements by allowing for application-unique interface cards that are utilized by reconfiguring the underlying programmable elements on the core processor card. We will show how this system is being used to improve on a heritage NASA GPS technology, enable a cutting-edge LiDAR instrument, and serve as a typical command and data handling (C&DH) computer for a space robotics technology demonstration.
Detection of explosive atmospheres using the software AtmosXp V 2.0

Directory of Open Access Journals (Sweden)

Carlos Mauricio Álvarez Álvarez

2014-01-01

Full Text Available Las condiciones de atmósferas explosivas y acumulación de gases dentro de las minas subterráneas de carbón requieren un anális is detallado y el desarrollo de modelos y mecanismos que permitan su detección. Para tal fin se ha desarrollado el software Atmos Xp V2.0 que incluye el diagrama de Coward para el análisis de estas mez clas explosivas.
Design and construction of program frame software of 300 keV/20 mA EBM control panel computerized base

International Nuclear Information System (INIS)

Eko Priyono; Saminto

2015-01-01

The program frame software of computer based control panel for 300 keV/20 mA EBM has been designed and constructed. This software is used for EBM components operating system, EBM operating parameters monitor and control system. This software contain instructions program for acquisition, actuation, process and display operation parameters data which is made by using visual basic V.6. This software displays some menus i.e. cover menu, main menu, sub menu and sub-sub menu. Performance test was done by integrating software and hardware and then operated the EBM via computer device. The test show that data communication between software and hardware was suitable, EBM components can be operated via computer device, EMB operation parameters can be controlled and monitored in form digital number, bar graph and continuous graphics the device can execute properly all instruction output program of 300 keV/20 mA control panel so the device is ready to use as one of computerize operating system of 300 keV/20 mA. (author)
Effects of uranium bombardment by 20-40 KeV argon ions, Annex 2

International Nuclear Information System (INIS)

Nenadovic, T.; Jurela, Z.

1966-01-01

This paper shows the results of argon ions interaction with the polycrystal natural uranium. Thin foil of uranium about 200 μ was bombarded by 20-40 KeV argon ions. Coefficients of cathode scattering δ and secondary electrons emission γ were measured, during the process A + →U. The foil was then studied by transmission method and method of single step replica using an electron microscope [sr
Comparison of turbulence models for numerical calculation of airflow in an annex 20 room

DEFF Research Database (Denmark)

Voigt, Lars P. K.

2000-01-01

The report deals with 2-D numerical calculation of room airflow in an isothermal annex 20 room. The report documents the ability of the flow solver EllipSys2D to give results in good agreement with measurements for the specified test case. The flow solver is a finite volume code solving the Reyno.......Applying theory for a two-dimensional wall jet, measurements are compared with calculated values of the turbulent kinetic energy....... the Reynolds Averaged Navier Stokes equations.Five two-equation turbulence models were tested. These are the standard k-epsilon model, the low-Reynolds number k-epison model by Launder & Sharma, the k-omega model by Wilcox, the k-omega baseline (BSL) model by Menter and the k-omega Shear Stress Transport (SST...
Hypothetical interaction mechanisms for heavy-ion collisions between 20 and 50 MeV/u

International Nuclear Information System (INIS)

Ngo, C.; Dalili, D.; Lucas, R.

1985-01-01

A brief survey of some aspects of heavy-ion interaction mechanisms, at bombarding energies between 20 and 50 MeV/u is presented. The maximum energy content of a nuclear system, the most probable linear momentum transfer and the possible existence of a ''calefaction'' phenomenon in heavy-ion collisions have also been investigated
Preequilibrium light particle emission in heavy ion collisions for E/A between 10 and 20 MeV/A

International Nuclear Information System (INIS)

Kailas, S.

1989-01-01

It is known that when two heavy ions collide, while the interaction process is dominated by nucleus-nucleus mean field effects at lower energies (E/A < 10Me V), the nucleon-nucleon collision aspects dominate at higher energies (E/A <100 MeV) . In the intermediate E/A region, both the above mentioned effects are important t o varying degrees. Many experiments have shown that when the incident energy excee ds 10 MeV/A, the complete fusion (CF) of target and projectile gives way to an inco mplete fusion (ICF) mechanism associated with preequilibrium light particle (PELP) emmi sion. This phenomenon becomes increasingly important as E increases and at E/A < 20 Me V, the cross section for PELP emission becomes comparable to the reaction cross section . Considerable progress has been made in the last decade towards understanding of ICF and PELP. In the present work, the review of this field is mainly restricted to E/A values lying between 10 and 20 MeV/A. (author). 27 refs., 5 figs
MetaPIGA v2.0: maximum likelihood large phylogeny estimation using the metapopulation genetic algorithm and other stochastic heuristics

Directory of Open Access Journals (Sweden)

Milinkovitch Michel C

2010-07-01

Full Text Available Abstract Background The development, in the last decade, of stochastic heuristics implemented in robust application softwares has made large phylogeny inference a key step in most comparative studies involving molecular sequences. Still, the choice of a phylogeny inference software is often dictated by a combination of parameters not related to the raw performance of the implemented algorithm(s but rather by practical issues such as ergonomics and/or the availability of specific functionalities. Results Here, we present MetaPIGA v2.0, a robust implementation of several stochastic heuristics for large phylogeny inference (under maximum likelihood, including a Simulated Annealing algorithm, a classical Genetic Algorithm, and the Metapopulation Genetic Algorithm (metaGA together with complex substitution models, discrete Gamma rate heterogeneity, and the possibility to partition data. MetaPIGA v2.0 also implements the Likelihood Ratio Test, the Akaike Information Criterion, and the Bayesian Information Criterion for automated selection of substitution models that best fit the data. Heuristics and substitution models are highly customizable through manual batch files and command line processing. However, MetaPIGA v2.0 also offers an extensive graphical user interface for parameters setting, generating and running batch files, following run progress, and manipulating result trees. MetaPIGA v2.0 uses standard formats for data sets and trees, is platform independent, runs in 32 and 64-bits systems, and takes advantage of multiprocessor and multicore computers. Conclusions The metaGA resolves the major problem inherent to classical Genetic Algorithms by maintaining high inter-population variation even under strong intra-population selection. Implementation of the metaGA together with additional stochastic heuristics into a single software will allow rigorous optimization of each heuristic as well as a meaningful comparison of performances among these
Inclusive charged and neutral pion photoproduction at 20 GeV

International Nuclear Information System (INIS)

Rickman O'Dell, V.

1987-05-01

The inclusive charged and neutral pion distributions from the interactions of 20 GeV photons on protons have been measured. The assumptions and analysis done to obtain these distributions are described, and the pion distributions are found to agree with general predictions of the quark-parton model. The quark-quark fusion model and the recombination model were compared to the inclusive pion distributions assuming the photon could be approximated by a superposition of rho and omega vector meson states - an assumption prompted by the Vector Meson Dominance Model of photon structure. Quark models applied to the difference in the charged pion cross sections are examined. The inclusive charge structure of the photoproduced charged pions and that of electroproduced and hadroproduced charged pions were compared
Eesti õpetajaskonna välissidemed 20.-30. aastail / Harri Kelder

Index Scriptorium Estoniae

Kelder, Harri

2000-01-01

Eesti Õpetajate Liidu eestvõttel toimunud rahvusvahelistest kontaktidest 20.-30.-ndatel. Tuginetud on sel perioodil pedagoogikaväljaandeis Õpetajate Leht, Kasvatus ja Eesti kool ilmunud erirubriikidele, mis kajastasid õpetajate kutseorganisatsioonide tegevust ja ettevõtmisi, sealhulgas välissidemeid. Balti Riikide Õpetajate Liidu (kuulusid Eesti, Läti ja Leedu õpetajate liidud) kaalukamateks üritusteks olid kolme riigi ühised õpetajate konverentsid, mis peeti 1925.a. Riias, 1928.a. Tallinnas ja 1931.a. Kaunases. Eesti-Soome õpetajate päevadest 1935.a., Eesti-Soome esimesest koolikongressist 1921.a. ja teisest koolikongressist 1937.a. Eesti Õpetajate Liit kuulus ka Rahvusvahelisse Õpetajate Liitude Föderatsiooni (Federatsion Internationale des Assotciationa dÌnstituteurs - FIAI) ja Rahvusvahelisse Keskkooliõpetajate Liitude Föderatsiooni (FIPESO)
Numerical Simulation of Adiabatic Shear Bands in Ti-6Al-4V Alloy Due to Fragment Impact

National Research Council Canada - National Science Library

Fermen-Coker, Muege

2004-01-01

... and lethality technologies for the Army's Future Combat Systems. Onset and propagation of adiabatic shear bands are investigated both experimentally and computationally by studying the ballistic impact of 20-mm steel fragments against Ti-6Al-4V plates...
Direct determination of k Q factors for cylindrical and plane-parallel ionization chambers in high-energy electron beams from 6 MeV to 20 MeV

Science.gov (United States)

Krauss, A.; Kapsch, R.-P.

2018-02-01

For the ionometric determination of the absorbed dose to water, D w, in high-energy electron beams from a clinical accelerator, beam quality dependent correction factors, k Q, are required. By using a water calorimeter, these factors can be determined experimentally and potentially with lower standard uncertainties than those of the calculated k Q factors, which are tabulated in various dosimetry protocols. However, one of the challenges of water calorimetry in electron beams is the small measurement depths in water, together with the steep dose gradients present especially at lower energies. In this investigation, water calorimetry was implemented in electron beams to determine k Q factors for different types of cylindrical and plane-parallel ionization chambers (NE2561, NE2571, FC65-G, TM34001) in 10 cm × 10 cm electron beams from 6 MeV to 20 MeV (corresponding beam quality index R 50 ranging from 1.9 cm to 7.5 cm). The measurements were carried out using the linear accelerator facility of the Physikalisch-Technische Bundesanstalt. Relative standard uncertainties for the k Q factors between 0.50% for the 20 MeV beam and 0.75% for the 6 MeV beam were achieved. For electron energies above 8 MeV, general agreement was found between the relative electron energy dependencies of the k Q factors measured and those derived from the AAPM TG-51 protocol and recent Monte Carlo-based studies, as well as those from other experimental investigations. However, towards lower energies, discrepancies of up to 2.0% occurred for the k Q factors of the TM34001 and the NE2571 chamber.
Direct determination of k Q factors for cylindrical and plane-parallel ionization chambers in high-energy electron beams from 6 MeV to 20 MeV.

Science.gov (United States)

Krauss, A; Kapsch, R-P

2018-02-06

For the ionometric determination of the absorbed dose to water, D w , in high-energy electron beams from a clinical accelerator, beam quality dependent correction factors, k Q , are required. By using a water calorimeter, these factors can be determined experimentally and potentially with lower standard uncertainties than those of the calculated k Q factors, which are tabulated in various dosimetry protocols. However, one of the challenges of water calorimetry in electron beams is the small measurement depths in water, together with the steep dose gradients present especially at lower energies. In this investigation, water calorimetry was implemented in electron beams to determine k Q factors for different types of cylindrical and plane-parallel ionization chambers (NE2561, NE2571, FC65-G, TM34001) in 10 cm × 10 cm electron beams from 6 MeV to 20 MeV (corresponding beam quality index R 50 ranging from 1.9 cm to 7.5 cm). The measurements were carried out using the linear accelerator facility of the Physikalisch-Technische Bundesanstalt. Relative standard uncertainties for the k Q factors between 0.50% for the 20 MeV beam and 0.75% for the 6 MeV beam were achieved. For electron energies above 8 MeV, general agreement was found between the relative electron energy dependencies of the k Q factors measured and those derived from the AAPM TG-51 protocol and recent Monte Carlo-based studies, as well as those from other experimental investigations. However, towards lower energies, discrepancies of up to 2.0% occurred for the k Q factors of the TM34001 and the NE2571 chamber.
Long-pulse neutral beam power supply system for LBL 20 kV, 10 A sources

International Nuclear Information System (INIS)

Honey, V.J.; Baker, W.R.; Fitzgerald, M.L.

1976-05-01

A description is given of the power supplies and control system for the LBL 20 kV, 10 A, 10 sec long-pulse neutral beam source test facility, now in operation. Such sources are used in a number of existing and planned fusion power experiments
Effective atomic numbers for photon energy absorption of essential amino acids in the energy range 1 keV to 20 MeV

International Nuclear Information System (INIS)

Manohara, S.R.; Hanagodimath, S.M.

2007-01-01

Effective atomic numbers for photon energy-absorption (Z PEAeff ) of essential amino acids histidine, leucine, lysine, methionine, phenylalanine, threonine, tryptophan and valine have been calculated by a direct method in the energy region of 1 keV to 20 MeV. The Z PEAeff values have been found to change with energy and composition of the amino acids. The variations of mass energy-absorption coefficient, effective atomic number for photon interaction (Z PIeff ) and Z PEAeff with energy are shown graphically. Significant differences exist between Z PIeff and the Z PEAeff in the energy region of 8-100 keV for histidine and threonine; 6-100 keV for leucine, lysine, tryptophan, phenylalanine and valine; 15-400 keV for methionine. The effect of absorption edge on effective atomic numbers and the possibility of defining two set values of these parameters at the K-absorption edge of high-Z element present in the amino acids are discussed. The reasons for using Z PEAeff rather than the commonly used Z PIeff in medical radiation dosimetry for the calculation of absorbed dose in radiation therapy are also discussed
Numerical simulation of range and backscattering for keV protons incident on random targets

International Nuclear Information System (INIS)

Robinson, J.E.; Agamy, S.

1975-01-01

Using a Monte-Carlo technique, projected range distributions and backscattering coefficients have been calculated for keV protons normally incident on heavy targets. For an incident reduced energy range of 1 less than epsilon 0 less than 20, both the projected range distributions and backscattering coefficients have been found to be in good agreement with a third order Edgeworth range approximation. Backscattered energy and angular distributions have also been calculated and are compared to available theoretical and experimental data. (4 figs.) (U.S.)
Complete fusion 20Ne + 12C at 110 MeV

International Nuclear Information System (INIS)

Saulnier, J.-C.

1978-01-01

Identification in mass and charge of products of the reaction 20 Ne (Elab = 110 MeV) + 12 C has been obtained using a time-of-flight system and a ΔE-E telescope. Angular distributions and energy spectra have been measured between laboratory angles of 3,7 0 and 17 0 . The fusion cross-section has been measured to be 1270 +- 150 mb, with the reaction cross-section of 1700 +- 170 mb. Yields of evaporation residues are compared to predictions of the code GROGI2, using the Hauser-Feshbach angular momentum dependent formalism. Calculations of the laboratory energy and angular distributions of evaporation residues are carried out and compared with the experimental data for several center of mass angular distributions (isotropic, 1/sin theta, 1/sin 2 theta) [fr
Photo-neutron yields from thin and thick targets irradiated by 2.0 GeV electrons

International Nuclear Information System (INIS)

Hee-Seock, Lee; Syuichi, Ban; Toshiya, Sanami; Kazutoshi, Takahashi; Tatsuhiko, Sato; Kazuo, Shin

2005-01-01

The photo-neutron yields from thin and thick targets irradiated by high energy electrons were studied. The photo-neutron spectra at 90 deg C relative to the incident 2.0 GeV electrons were measured by the pulsed beam time-of-flight technique using the Pilot-U plastic scintillator and the NE213 liquid scintillator with 2 inches in length and 2 inches in diameter. Targets, from low-Z element (carbon) to high-Z element (bismuth) and with thin (0.5 Xo) and thick (10 Xo) thickness, were used in this study. The differential photo-neutron yields between 2 MeV (mainly 8 MeV) and 400 MeV were obtained. The systematics was studied to make empirical yield terms for shielding application. Recently, the study of the angular distributed yields was conducted at two other observing angles, 48 deg C and 140 deg C. The photo-neutron yields between 8 MeV and 250 MeV were obtained for thick targets. The experimental data were compared with results calculated using the EGS4+PICA3 or the MCNPX 2.5d code. (authors)
Numerical analysis

CERN Document Server

Brezinski, C

2012-01-01

Numerical analysis has witnessed many significant developments in the 20th century. This book brings together 16 papers dealing with historical developments, survey papers and papers on recent trends in selected areas of numerical analysis, such as: approximation and interpolation, solution of linear systems and eigenvalue problems, iterative methods, quadrature rules, solution of ordinary-, partial- and integral equations. The papers are reprinted from the 7-volume project of the Journal of Computational and Applied Mathematics on '/homepage/sac/cam/na2000/index.html<
Construction of an electron accelerator of 20 KeV: application in the polymeric study

International Nuclear Information System (INIS)

Sandonato, G.M.

1983-01-01

A low energy electron accelerator (maximum energy 20 KeV) is constructed. A black and white kinescope electron gun, with a single thermionic emitter was used as electron source. The energy of electron beam can be changed continuously from 0 to 20 KeV. The intensity of the current can be changed from a minimum of 10 -12 A to a maximum of 3 μA, and can be mantained contant in time after its value has been fixed. The irradiated area can be changed from a diameter of 1 milimeter to a maximum of 6 centimeter, by focalizing or defocalizing the image of electron beam. The final pressure reached in vacuum chambers was 10 -7 Torr. During operation the surface of cathode of electron gun is damaged by ion bombardeament. The degree of damage can be checked if the cathode image is focalized and examined on a luminescent screen. The accelerator was used to study electron irradiation effects in Teflon, employing the method of the split Faraday cup. Transient charging and discharging currents were measured. The average range of electrons of the electrons and the induced conductivity were determined. (Author) [pt

SedFoam-2.0: a 3-D two-phase flow numerical model for sediment transport

Directory of Open Access Journals (Sweden)

J. Chauchat

2017-11-01

Full Text Available In this paper, a three-dimensional two-phase flow solver, SedFoam-2.0, is presented for sediment transport applications. The solver is extended from twoPhaseEulerFoam available in the 2.1.0 release of the open-source CFD (computational fluid dynamics toolbox OpenFOAM. In this approach the sediment phase is modeled as a continuum, and constitutive laws have to be prescribed for the sediment stresses. In the proposed solver, two different intergranular stress models are implemented: the kinetic theory of granular flows and the dense granular flow rheology μ(I. For the fluid stress, laminar or turbulent flow regimes can be simulated and three different turbulence models are available for sediment transport: a simple mixing length model (one-dimensional configuration only, a k − ε, and a k − ω model. The numerical implementation is demonstrated on four test cases: sedimentation of suspended particles, laminar bed load, sheet flow, and scour at an apron. These test cases illustrate the capabilities of SedFoam-2.0 to deal with complex turbulent sediment transport problems with different combinations of intergranular stress and turbulence models.
SedFoam-2.0: a 3-D two-phase flow numerical model for sediment transport

Science.gov (United States)

Chauchat, Julien; Cheng, Zhen; Nagel, Tim; Bonamy, Cyrille; Hsu, Tian-Jian

2017-11-01

In this paper, a three-dimensional two-phase flow solver, SedFoam-2.0, is presented for sediment transport applications. The solver is extended from twoPhaseEulerFoam available in the 2.1.0 release of the open-source CFD (computational fluid dynamics) toolbox OpenFOAM. In this approach the sediment phase is modeled as a continuum, and constitutive laws have to be prescribed for the sediment stresses. In the proposed solver, two different intergranular stress models are implemented: the kinetic theory of granular flows and the dense granular flow rheology μ(I). For the fluid stress, laminar or turbulent flow regimes can be simulated and three different turbulence models are available for sediment transport: a simple mixing length model (one-dimensional configuration only), a k - ɛ, and a k - ω model. The numerical implementation is demonstrated on four test cases: sedimentation of suspended particles, laminar bed load, sheet flow, and scour at an apron. These test cases illustrate the capabilities of SedFoam-2.0 to deal with complex turbulent sediment transport problems with different combinations of intergranular stress and turbulence models.
Neutron cross section standards for the energy region above 20 MeV

International Nuclear Information System (INIS)

1991-01-01

These proceedings of a specialists' meeting on Neutron cross section standards for the energy region above 20 MeV are divided into 6 sessions bearing on: - session 1: status of the date base for (n-p) scattering (2 conferences) - session 2: status of nucleon-nucleon phase shift calculations (1 conference) - session 3: recent and planned experimental work on n-p cross section measurements and facilities (7 conferences) - session 4: Instruments for utilizing the H (n.n) standard for neutron fluence measurement (4 conferences) - session 5: proposal for other neutron cross-section standards (4 conferences) - session 6: monitor reactions for radiation dosimetry (3 conferences)
Violence of heavy-ion reactions from neutron multiplicity: 11 to 20A MeV /sup 20/Ne+ /sup 238/U

International Nuclear Information System (INIS)

Jahnke, U.; Ingold, G.; Hilscher, D.; Lehmann, M.; Schwinn, E.; Zank, P.

1986-01-01

The suitability of the neutron multiplicity as a gauge for the violence of medium-energy heavy-ion reactions is investigated for the first time. For this purpose the number of neutrons emitted from fission reactions induced by 220-, 290-, and 400-MeV /sup 20/Ne on /sup 238/U is registered event-by-event with a large 4π scintillator tank. It is shown that the neutron multiplicity is indeed closely related to the two quantities characterizing the violence: the induced total intrinsic excitation and the linear momentum transfer
Conventional 20-TeV, 10-Tesla, p/sup +-/ colliders

International Nuclear Information System (INIS)

Diebold, R.; Ankenbrandt, C.; Collins, T.

1982-01-01

The performance of various 20-TeV colliders is discussed assuming 10-Tesla bending magnets. For bunched beams, the luminosity for anti pp collisions will be approximately x 10 31 cm - 2 sec - 1 where is the average number of interactions per bunch collision desired by the experimenters; for pp collisions this becomes x 10 32 cm - 2 sec - 1 . Values of up to 25 can be accommodated in a straightforward manner. Continuous beam pp collisions may yield a luminosity of 10 33 to 10 34 cm - 2 sec - 1 if the large amount of energy in the intense beams can be handled. Assuming that adequate and reliable 10-Tesla magnets can be built without unforeseen difficulties, the construction cost of such a collider, together with its new laboratory in the desert, would cost 2 to 3 billion dollars (FY-82 dollars) using present-day, conventional techniques. Although such a machine appears straightforward to build, considerable R and D will be required in order to optimize the design and bring down costs
Ellipsometry and energy characterization of the electron impact polymerization in the range 0–20 eV

International Nuclear Information System (INIS)

Zyn, V.I.

2016-01-01

The electron impact polymerization of adsorbed vapors of a hydrocarbon vacuum oil with molecular mass 450 Da (C 32 H 66 ) has been studied in-situ in the range 0–20 eV using ellipsometry and a servo system with the Kelvin's vibrating probe. This allowed registering at the same time the two energy-dependent characteristics (spectra) of the process: the film growth rate and the electrical potential of the irradiated surface. The first spectrum has two resonance maxima near 2.5 and 9.5 eV while the surface potential has only one weak extremum near 9.5 eV. The first growth rate peak at 2.5 eV was connected with a creation of radicals through a resonant process of the dissociative electron attachment and beginning polymerization. The peaks at 9.5 eV in both the spectra mean accelerating polymerization and decreasing surface charge owing to simultaneous birth of highly active radicals and free electrons. The single resonant process controlling both the processes simultaneously is the dissociative attachment of an electron to an anti-bonding molecular orbital, almost the same as at the 2.5 eV but differing by deeper decomposition of the transient anion, among the products of which are now not the radicals only but also free electrons. The kinetic curves obtained in pulsed regimes of the electron bombardment were qualitatively identical for different precursors and were used for calculations of cross sections of these processes. - Highlights: • Obtaining spectra of activated polymerization using ellipsometry and Kelvin probe. • Identified: two resonant and one non-resonant mechanisms of the activation. • The resonances are due to the action of the dissociative electron attachment. • Kinetics of transient processes in adsorbed layer under 20 eV pulsed electron beam.
HETC-3STEP calculations of proton induced nuclide production cross sections at incident energies between 20 MeV and 5 GeV

International Nuclear Information System (INIS)

Takada, Hiroshi; Yoshizawa, Nobuaki; Ishibashi, Kenji.

1996-08-01

For the OECD/NEA code intercomparison, nuclide production cross sections of 16 O, 27 Al, nat Fe, 59 Co, nat Zr and 197 Au for the proton incidence with energies of 20 MeV to 5 GeV are calculated with the HETC-3STEP code based on the intranuclear cascade evaporation model including the preequilibrium and high energy fission processes. In the code, the level density parameter derived by Ignatyuk, the atomic mass table of Audi and Wapstra and the mass formula derived by Tachibana et al. are newly employed in the evaporation calculation part. The calculated results are compared with the experimental ones. It is confirmed that HETC-3STEP reproduces the production of the nuclides having the mass number close to that of the target nucleus with an accuracy of a factor of two to three at incident proton energies above 100 MeV for nat Zr and 197 Au. However, the HETC-3STEP code has poor accuracy on the nuclide production at low incident energies and the light nuclide production through the fragmentation process induced by protons with energies above hundreds of MeV. Therefore, further improvement is required. (author)
FIRST INTEGRAL OBSERVATIONS OF V404 CYGNI DURING THE 2015 OUTBURST: SPECTRAL BEHAVIOR IN THE 20–650 KeV ENERGY RANGE

Energy Technology Data Exchange (ETDEWEB)

Roques, Jean-Pierre; Jourdain, Elisabeth [Université Toulouse, UPS-OMP, CNRS, IRAP, 9 Av. Roche, BP 44346, F-31028 Toulouse (France); Bazzano, Angela; Fiocchi, Mariateresa; Natalucci, Lorenzo; Ubertini, Pietro [Istituto di Astrofisica e Planetologia Spaziali, INAF, Via Fosso del Cavaliere 100, I-00133 Roma, Italy (Italy)

2015-11-01

In 2015 June, the source V404 Cygni (= GS2023+38) underwent an extraordinary outburst. We present the results obtained during the first revolution dedicated to this target by the INTEGRAL mission and focus on the spectral behavior in the hard X-ray domain, using both SPI and IBIS instruments. The source exhibits extreme variability and reaches fluxes of several tens of Crab. However, the emission between 20 and 650 keV can be understood in terms of two main components, varying on all the observable timescales, similar to what is observed in the persistent black hole system Cyg X-1. The low-energy component (up to ∼200 keV) presents a rather unusual shape, probably due to the intrinsic source variability. Nonetheless, a satisfactory description is obtained with a Comptonization model, if an unusually hot population of seed photons (kT{sub 0} ∼ 7 keV) is introduced. Above this first component, a clear excess extending up to 400–600 keV leads us to investigate a scenario where an additional (cutoff) power law could correspond to the contribution of the jet synchrotron emission, as proposed in Cyg X-1. A search for an annihilation feature did not provide any firm detection, with an upper limit of 2 × 10{sup −4} ph cm{sup −2} s{sup −1} (2σ) for a narrow line centered at 511 keV, on the averaged obtained spectrum.
Modification of Modulating Anode Voltage Supply of Klystron for PEFP 20 MeV Linac

International Nuclear Information System (INIS)

Kim, Dae Il; Kwon, Hyeok Jung; Kim, Han Sung; Cho, Yong Sub

2011-01-01

The klystron (TH2089F, THALES) for PEFP 20MeV proton linear accelerator has a triode type electron gun and the modulating anode voltage should be supplied. The klystron has gone through some modification in the modulating anode voltage supply circuit. Formerly, the mod-anode voltage was supplied by using the tetrode-controlled voltage divider. This system requires addition power supply for the tetrode and the grid control circuit. Recently we modified the mod-anode supply from the tetrode-controlled voltage divider to a resistive voltage divider. The resistors for the previous voltage divider were installed at a supporter with high voltage bushing structure next to the klystron. In the previous system, the resistors were exposed to the air and their size was very bulky, length of which was about 1m long. To reduce the space occupied by the voltage divider and to improve the electrical insulation performance, the voltage dividing resistors were moved into the oil tank of the klystron. During the operation of the 20 MeV linac, the klystron parameters were measured. In this paper, the modification of the voltage divider and the operational characteristics of the klystron with modified voltage divider circuit are presented
Optimization of the microwave coupler and microwave measurements of the microtron cavity for 20 MeV pre-injector microtron for INDUS-I SRS

International Nuclear Information System (INIS)

Wanmode, Y.D.; Shrivastava, Purushottam; Hannurkar, P.R.

2003-01-01

A 20 MeV microtron was developed indigenously by CAT for pre-injection of 20 MeV electrons to the 450 MeV/700 MeV Booster Synchrotron for INDUS-I and INDUS-II Synchrotron Radiation Sources. The injector microtron uses a high Q microwave cavity for acceleration of electrons. The microwave power is fed to the microtron cavity through an iris type coupler whose dimensions are optimized for the coupling factor and resonant frequency for the accelerator. The present paper gives the procedure details for coupling factor optimization, tuning of the resonant frequency and results achieved. (author)
Ordinary dielectric function of corundumlike α -Ga2O3 from 40 meV to 20 eV

Science.gov (United States)

Feneberg, Martin; Nixdorf, Jakob; Neumann, Maciej D.; Esser, Norbert; Artús, Lluis; Cuscó, Ramon; Yamaguchi, Tomohiro; Goldhahn, Rüdiger

2018-04-01

The linear optical response of metastable α -Ga2O3 is investigated by spectroscopic ellipsometry. We determine the ordinary dielectric function from lattice vibrations up to the vacuum ultraviolet spectral range at room temperature for a sample with a (0001 ) surface. Three out of four Eu infrared-active phonon modes are unambiguously determined, and their frequencies are in good agreement with density functional theory calculations. The dispersion of the refractive index in the visible and ultraviolet part of the spectrum is determined. High-energy interband transitions are characterized up to 20 eV . By comparison with the optical response of α -Al2O3 and with theoretical results, a tentative assignment of interband transitions is proposed.
On generation of high power x-rays in the range 7-20 keV

International Nuclear Information System (INIS)

Ratakhin, N.A.

1997-01-01

An attempt is made on the base of general relations to evaluate possibility of two approaches to the problem of receiving powerful x-radiation id spectral range of (7-20) keV. Extremely cut possibilities of electron beams of vacuum diodes and Z-pinch plasma thermal radiation are shown. Some perspectives of increasing such radiation power in connection with possibility of generation of high-energy electrons in Z-pinch plasma are noted
Positron impact excitation (n = 2 states) of hydrogen at 20 eV

Energy Technology Data Exchange (ETDEWEB)

Kamali, M. Z. M.; Ratnavelu, K. [University of Malaya, Kuala Lumpur (Malaysia)

2011-10-15

The calculation of accurate differential cross sections (DCS) has always posed a litmus test for theoretical models. Among the positron-atom scattering systems, the positron-hydrogen (e{sup +}-H) atom system is the fundamental prototype. Thus, the present work utilizes 12- and 15-states coupled channel optical method (CCOM) calculations to study the DCS H(2s+2p) excitation, together with the angular correlation parameters ({lambda}(2p)), for the e{sup +}-H system at 20 eV, but up to now, there have been no measurements yet on the DCS for this system. A comparison is done with other theoretical and experimental works, including the electron case.
Biological effect of 20 keV N+ ion implantation on Stevia rebaudianum

International Nuclear Information System (INIS)

Su Tingting; Yang Tingting; Ji Guohong; Xiang Xingjia; Chen Xuetao; Wang Yu; Wu Yaojin

2010-01-01

The germinability and gemination rate of Stevia rebaudianum seeds implanted with 20 keV N + ions in doses of 0 (CK), 100 x 2500, 400 x 2500 and 1000 x 2500 N + /cm 2 were studied by analyzing the differences in seed germinability and gemination rate between the groups. By statistical analysis, the germinability and gemination rate were affected at the level of α=0.05 by the implantation dose. The results showed that the germinability and gemination rate increased with the dose first and then decreased. At 400 x 2500 N + /cm 2 , the seeds had the largest germinability and the gemination rate. (authors)
Studies on effective atomic numbers for photon energy absorption and electron density of some narcotic drugs in the energy range 1 keV-20 MeV

Science.gov (United States)

Gounhalli, Shivraj G.; Shantappa, Anil; Hanagodimath, S. M.

2013-04-01

Effective atomic numbers for photon energy absorption ZPEA,eff, photon interaction ZPI,eff and for electron density Nel, have been calculated by a direct method in the photon-energy region from 1 keV to 20 MeV for narcotic drugs, such as Heroin (H), Cocaine (CO), Caffeine (CA), Tetrahydrocannabinol (THC), Cannabinol (CBD), Tetrahydrocannabivarin (THCV). The ZPEA,eff, ZPI,eff and Nel values have been found to change with energy and composition of the narcotic drugs. The energy dependence ZPEA,eff, ZPI,eff and Nel is shown graphically. The maximum difference between the values of ZPEA,eff, and ZPI,eff occurs at 30 keV and the significant difference of 2 to 33% for the energy region 5-100 keV for all drugs. The reason for these differences is discussed.
Photo-double ionization of argon at 20 and 40 eV excess energy

International Nuclear Information System (INIS)

Bolognesi, P; Zitnik, M; Malegat, L; Selles, P; Turri, G; Coreno, M; Camilloni, R; Avaldi, L

2004-01-01

We have measured the triple differential cross section of the Ar 2+ 3p 4 ( 3 P e ) state at 20 and 40 eV excess energy in equal and unequal energy sharing conditions, respectively. The present results and previous data of the He 2+ ( 1 S e ) state measured in the same conditions have been represented by an exact parametrization of the triple differential cross section given by Malegat et al (1997 J. Phys. B: At. Mol. Opt. Phys. 30 251; 2002 J. Phys. B: At. Mol. Opt. Phys. 35 5169)
Gamma-ray production cross sections for 0.9 to 20 MeV neutron interactions with 10B

International Nuclear Information System (INIS)

Bywater, R.L. Jr.

1986-09-01

Gamma-ray spectral data previously obtained at the 20-meter station of the Oak Ridge Electron Linear Accelerator flight-path 8 were studied to determine cross sections for 0.9- to 20-MeV neutron interactions with 10 B. Data reduction techniques, including those for determination of incident neutron fluences as well as those to compensate for Doppler-broadened gamma-ray-detection responses, are given in some detail in this report. 9 refs., 4 figs., 2 tabs
The Work Role Functioning Questionnaire v2.0 Showed Consistent Factor Structure Across Six Working Samples

DEFF Research Database (Denmark)

Abma, Femke I.; Bültmann, Ute; Amick, Benjamin C.

2017-01-01

Objective: The Work Role Functioning Questionnaire v2.0 (WRFQ) is an outcome measure linking a persons’ health to the ability to meet work demands in the twenty-first century. We aimed to examine the construct validity of the WRFQ in a heterogeneous set of working samples in the Netherlands...
The Work Role Functioning Questionnaire v2.0 Showed Consistent Factor Structure Across Six Working Samples

NARCIS (Netherlands)

Abma, F.I.; Bultmann, U.; Amick III, B.C.; Arends, I.; Dorland, P.A.; Flach, P.A.; Klink, J.J.L van der; Ven H.A., van de; Bjørner, J.B.

2017-01-01

Objective The Work Role Functioning Questionnaire v2.0 (WRFQ) is an outcome measure linking a persons’ health to the ability to meet work demands in the twenty-first century. We aimed to examine the construct validity of the WRFQ in a heterogeneous set of working samples in the Netherlands with
Investigation of complete and incomplete fusion in 20Ne + 51V system using recoil range measurement

Directory of Open Access Journals (Sweden)

Ali Sabir

2015-01-01

Full Text Available Recoil range distributions of evaporation residues, populated in 20Ne + 51V reaction at Elab ≈ 145 MeV, have been studied to determine the degree of momentum transferred through the complete and incomplete fusion reactions. Evaporation residues (ERs populated through the complete and incomplete fusion reactions have been identified on the basis of their recoil range in the Al catcher medium. Measured recoil range of evaporation residues have been compared with the theoretical value calculated using the code SRIM. Range integrated cross section of observed ERs have been compared with the value predicted by statistical model code PACE4.

HETC-3STEP calculations of proton induced nuclide production cross sections at incident energies between 20 MeV and 5 GeV

Energy Technology Data Exchange (ETDEWEB)

Takada, Hiroshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Yoshizawa, Nobuaki; Ishibashi, Kenji

1996-08-01

For the OECD/NEA code intercomparison, nuclide production cross sections of {sup 16}O, {sup 27}Al, {sup nat}Fe, {sup 59}Co, {sup nat}Zr and {sup 197}Au for the proton incidence with energies of 20 MeV to 5 GeV are calculated with the HETC-3STEP code based on the intranuclear cascade evaporation model including the preequilibrium and high energy fission processes. In the code, the level density parameter derived by Ignatyuk, the atomic mass table of Audi and Wapstra and the mass formula derived by Tachibana et al. are newly employed in the evaporation calculation part. The calculated results are compared with the experimental ones. It is confirmed that HETC-3STEP reproduces the production of the nuclides having the mass number close to that of the target nucleus with an accuracy of a factor of two to three at incident proton energies above 100 MeV for {sup nat}Zr and {sup 197}Au. However, the HETC-3STEP code has poor accuracy on the nuclide production at low incident energies and the light nuclide production through the fragmentation process induced by protons with energies above hundreds of MeV. Therefore, further improvement is required. (author)
ECO2N V. 2.0: A New TOUGH2 Fluid Property Module for Mixtures of Water, NaCl, and CO₂

Energy Technology Data Exchange (ETDEWEB)

Pan, L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Spycher, N. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Doughty, C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Pruess, K. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2014-12-01

ECO2N V2.0 is a fluid property module for the TOUGH2 simulator (Version 2.1) that was designed for applications to geologic sequestration of CO₂ in saline aquifers and enhanced geothermal reservoirs. ECO2N V2.0 is an enhanced version of the previous ECO2N V1.0 module (Pruess, 2005). It expands the temperature range up to about 300°C whereas V1.0 can only be used for temperatures below about 110°C. V2.0 includes a comprehensive description of the thermodynamics and thermophysical properties of H₂O - NaCl -CO₂ mixtures, that reproduces fluid properties largely within experimental error for the temperature, pressure and salinity conditions of interest (10 °C < T < 300 °C; P < 600 bar; salinity up to halite saturation). This includes density, viscosity, and specific enthalpy of fluid phases as functions of temperature, pressure, and composition, as well as partitioning of mass components H₂O, NaCl and CO₂ among the different phases. In particular, V2.0 accounts for the effects of water on the thermophysical properties of the CO₂-rich phase, which was ignored in V1.0, using a model consistent with the solubility models developed by Spycher and Pruess (2005, 2010). In terms of solubility models, V2.0 uses the same model for partitioning of mass components among the different phases (Spycher and Pruess, 2005) as V1.0 for the low temperature range (<99°C) but uses a new model (Spycher and Pruess, 2010) for the high temperature range (>109°C). In the transition range (99-109°C), a smooth interpolation is applied to estimate the partitioning as a function of the temperature. Flow processes can be modeled isothermally or non-isothermally, and phase conditions represented may include a single (aqueous or CO₂-rich) phase, as well as two-phase mixtures. Fluid phases may appear or disappear in the course of a simulation, and solid salt may precipitate or dissolve. This report gives technical
Mass spectra and fusion cross sections for 20Ne+24Mg interaction at 55 and 85 MeV

International Nuclear Information System (INIS)

Grotowski, K.; Belery, P.; Delbar, T.; El Masri, Y.; Gregoire, G.; Janssens, R.; Vervier, J.; Paic, G.; Albinska, M.; Albinski, J.; Kopta, S.; Kozik, T.; Planeta, R.

1981-01-01

Inclusive γ spectra from the 20 Ne+ 24 Mg interaction have been measured using 55- and 85-MeV 20 Ne ions. The identification of γ lines allows the determination of mass spectra in the region 12< or =A< or =43. Experimental results are compared with statistical model calculations. The total reaction and fusion cross sections are extracted. Cross sections for inelastic scattering, few nucleon transfers, and deep inelastic scattering are estimated
Model calculation of neutron reaction data for 31P in the energy range from 0.1 to 20 MeV

International Nuclear Information System (INIS)

Li Jiangting; Ge Zhigang; Sun Xiuquan

2006-01-01

The neutron data calculation of 31 P in the energy range from 0.1 to 20 MeV was carried out. The neutron optical potential parameters for 31 P in energy range from O.1 to 20 MeV were obtained, based on the fitting of the available neutron experimental data with the code APOM94. The DWUCK4 code was used to investigate the cross section for neutron direct inelastic scattering. The re-evaluated neutron data is based on the available measured data by using the UNF code. The theoretical results reproduce the experimental data well, and the results were given in ENDF/B-6 format. (authors)
The Efficiency of the BC-720 Scintillator in a High-Energy (20--800 MeV) Accelerator Neutron Field

Energy Technology Data Exchange (ETDEWEB)

Miles, Leslie H. [Univ. of Missouri, Columbia, MO (United States)

2005-12-01

High-energy neutron doses (>20 MeV) are of little importance to most radiation workers. However, space and flight crews, and people working around medical and scientific accelerators receive over half of their radiation dose from high-energy neutrons. Unfortunately, neutrons are difficult to measure, and no suitable dosimetry has yet been developed to measure this radiation. In this paper, basic high-energy neutron interactions, characteristics of high-energy neutron environments, present neutron dosimetry, and quantities used in neutron dosimetry are discussed before looking into the potential of the BC-720 scintillator to improve dosimetry. This research utilized 800 MeV protons impinging upon the WNR Facility spallation neutron source at Los Alamos National Laboratory. Time-of-flight methods and a U-238 Fission Chamber were used to aid evaluation of the efficiency of the BC-720. Results showed that the efficiency is finite over the 20–650 MeV energy region studied, although it decreases by a factor of ten between 40 and 100 MeV. This limits the use of this dosimeter to measure doses at sitespecific locations. It also encourages modifications to use this dosimeter for any unknown neutron field. As such, this dosimeter has the potential for a small, lightweight, real-time dose measurement, which could impact neutron dosimetry in all high-energy neutron environments.
ACUTE-TO-CHRONIC ESTIMATION (ACE V 2.0) WITH TIME-CONCENTRATION-EFFECT MODELS: USER MANUAL AND SOFTWARE

Science.gov (United States)

Ellersieck, Mark R., Amha Asfaw, Foster L. Mayer, Gary F. Krause, Kai Sun and Gunhee Lee. 2003. Acute-to-Chronic Estimation (ACE v2.0) with Time-Concentration-Effect Models: User Manual and Software. EPA/600/R-03/107. U.S. Environmental Protection Agency, National Health and Envi...
Investigation of charge stripping scheme for uranium ions at 1-20 MeV/nucleon

Science.gov (United States)

Kuboki, Hironori; Harada, Hiroyuki; Saha, Pranab K.

2018-05-01

We investigated a possibility to obtain charge distributions of uranium ions under the conditions to meet the requirements of the booster synchrotron proposed for heavy ion acceleration at J-PARC. The charge distribution is expected to have a width as narrow as possible to realize multi-charge acceleration. The main candidate of stripping material is a carbon foil because we can obtain narrower distributions than gas stripper and a lot of data is available. Besides that, the thickness of the stripping material should be less than 142 μg cm-2 because the energy loss in the stripping material would be compensated by an auxiliary accelerating cavity in the synchrotron ring. We studied the impact energy with which the charge distribution attains equilibrium within this thickness and has the narrowest width. The width is estimated over 1-20 MeV/nucleon by the calculation using the ionization and electron capture cross sections. Scaling factors are introduced to reproduce the experimental data and are determined to be 2.0 and 0.08 for the cross sections of ionization and electron capture, respectively. We concluded that the narrowest width can be obtained at 5.5 MeV/nucleon with a 109-μg cm-2-thick carbon foil.
Evaluated neutron-induced cross sections for 40Ca from 20 to 40 MeV

International Nuclear Information System (INIS)

Hetrick, D.M.; Fu, C.Y.; Larson, D.C.

1982-09-01

Nuclear model codes were used to compute cross sections for neutron-induced reactions on 40 Ca for incident energies from 20 to 40 MeV. The input parameters for the model codes were determined through analysis of experimental data in this energy region. Computed cross sections along with emission spectra for each product were combined into an Evaluated Nuclear Data File (ENDF) using the proposed format for charged-particle reactions. Discussion of the models used, the resulting calculations, and the final evaluated data file are presented
Interagency mechanical operations group numerical systems group

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-09-01

This report consists of the minutes of the May 20-21, 1971 meeting of the Interagency Mechanical Operations Group (IMOG) Numerical Systems Group. This group looks at issues related to numerical control in the machining industry. Items discussed related to the use of CAD and CAM, EIA standards, data links, and numerical control.
Cosmic rays: the spectrum and chemical composition from 10{sup 10} to 10{sup 20} eV

Energy Technology Data Exchange (ETDEWEB)

Peixoto, C.J. Todero; De Souza, Vitor [Instituto de Física de São Carlos, Universidade de São Paulo, Av. Trabalhador São-carlense 400, São Carlos (Brazil); Biermann, Peter L., E-mail: toderocj@usp.br, E-mail: vitor@ifsc.usp.br, E-mail: plbiermann@mpifr-bonn.mpg.de [Max-Planck-Institute for Radioastronomy, Auf dem Hügel 69, 53121 Bonn (Germany)

2015-07-01

The production of energetic particles in the universe remains one of the great mysteries of modern science. The mechanisms of acceleration in astrophysical sources and the details about the propagation through the galactic and extragalactic media are still to be defined. In recent years, the cosmic ray flux has been measured with high precision in the energy range from 10{sup 10} to 10{sup 20.5} eV by several experiments using different techniques. In some energy ranges, it has been possible to determine the flux of individual elements (hydrogen to iron nuclei). This paper explores an astrophysical scenario in which only our Galaxy and the radio galaxy Cen A produce all particles measured on Earth in the energy range from 10{sup 10} to 10{sup 20.5} eV . Data from AMS-02, CREAM, KASCADE, KASCADE-Grande and the Pierre Auger Observatories are considered. The model developed here is compared to the total and if available to the individual particle flux of the experiments considered.The flux of each element as determined by AMS-02, CREAM, KASCADE and KASCADE-Grande and the mass sensitivity parameter X{sub max} measured by the Pierre Auger Observatory above 10 eV are also explored within the framework of the model. The transition from 10{sup 16} to 10{sup 18} eV is carefully analyzed. It is shown that the flux measured in this energy range suggest the existence of an extra component of cosmic rays yet to be understood.
Break-down stage in a 20 kV coaxial gun

International Nuclear Information System (INIS)

Feugeas, J.; Massa, M.; VonPamel, O.

1984-01-01

The electrical break-down of hydrogen in a coaxial electrode system (similar to Mather-type Plasma Focus) was studied for a wide range of pressures. A squirrel's cage outer electrode (cathode) of 50 mm of diameter was used to allow lateral views of the discharge, with an inner electrode (anode) of 17 mm of diameter and a pyrex sleeve of 25 mm length as insulator located at the breech of the gun. A low inductance plane plate transmission line was discharged (20 kV) through a spark gap switch over the system, with a typical peak current of 22 kA, reached after 80 ns from onset of the discharge. The fine structure of the luminous current sheath was studied by frontal and lateral open shutter photographs and by monitoring the current distribution along and across the electrodes gap. The authors tests determine the relative importance of the resistivity related to particle collision effects (αiota) and of the inductive resistivity (α L-center dot) during the break-down stage (iota=length of break-down path, L=inductance)
Update photovoltaics in view of Ecoinvent data V2.0

Energy Technology Data Exchange (ETDEWEB)

Jungbluth, N.; Tuchschmid, M.

2007-12-15

This final report for the Swiss Federal Office of Energy (SFOE) reports on the updating of the Ecoinvent database on behalf of the European Photovoltaics Industry Association and the Swiss Federal Office of Energy. In this project, data has been collected directly from manufacturers and research projects. Life-Cycle Analyses (LCA) made by various authors have been considered for the assessment. The information was used to elaborate life cycle inventories for electricity production using photovoltaics in grid-connected, 3 kWp plants in the year 2005. The inventories cover monocrystalline and polycrystalline cells, amorphous and ribbon-silicon, CdTe and CIS thin-film cells. The environmental impact caused by infrastructure at all stages of production and the effluents from wafer production are also considered. The Ecoinvent V2.0 data is used as a background data-base. The report investigates the LCA inventories for photovoltaics, comparing different types of cells used in Switzerland and also analyses the electricity production in different countries. The report also discusses how the environmental impact of photovoltaics has been reduced over the last 15 years.
Incomplete momentum transfer components in /sup 16/O + /sup 12/C Fusion at 20 MeV/A

Energy Technology Data Exchange (ETDEWEB)

Menchaca-Rocha, A.; Brandan, M.E. (Grenoble-1 Univ., 38 (France). Inst. des Sciences Nucleaires); Dacal, A.; Galindo, A.; Mahoney, J.; Murphy, M.; Rae, W.D.M. (California Univ., Berkeley (USA). Lawrence Berkeley Lab.)

1983-01-27

The energy spectra of Z = 3-9 particles from reactions induced by 20 MeV/A /sup 16/O on /sup 12/C have been measured. The systematics found from the fusion-like residues clearly deviate from those expected for complete fusion, giving evidence for important incomplete momentum transfer components.
Photon production in Pb + Pb collisions at √{sNN } = 2.76 TeV

Science.gov (United States)

Fu, Yong-Ping; Xi, Qin

2018-02-01

We calculate the high energy photon production from the Pb + Pb collisions for different centrality classes at √{sNN } = 2.76 TeV Large Hadron Collider (LHC) energy. The jet energy loss in the jet fragmentation, jet-photon conversion and jet bremsstrahlung is considered by using the Wang-Huang-Sarcevic (WHS) and Baier-Dokshitzer-Mueller-Peigne-Schiff (BDMPS) models. We use the (1 + 1)-dimensional ideal relativistic hydrodynamics to study the collective transverse flow and space-time evolution of the quark gluon plasma (QGP). The numerical results agree well with the ALICE data of the direct photons from the Pb + Pb collisions (√{sNN } = 2.76 TeV) for 0-20%, 20-40% and 40-80% centrality classes.
Monte-Carlo calculations of forward directed bremsstrahlung produced by 20 and 45 MeV electrons on tungsten

International Nuclear Information System (INIS)

Goosman, D.R.

1983-01-01

The SANDYL Monte-Carlo code has been used to calculate the Bremsstrahlung photon production from beams of parallel electrons incident upon three target geometries. These are 20 MeV electrons onto 1 mm of tungsten + 59 mm of Be, which simulates the operating parameters of the FXR electron accelerator at LLNL Bldg. 801, 45 MeV electrons onto 1 mm of tungsten, and finally 45 MeV electrons onto 1 mm of tungsten and 147 mm of Be. The latter two situations simulate possible future modifications to the FXR accelerator. Graphs of the spectral shape of the Bremsstrahlung photons emitted with angles between 0 0 and 1 0 to the electron direction, the angular distribution of photon-MeV, and the dose reduction curves for each of the three geometries are given. The latter dose reduction curves allow one to calculate forward-directed photon fluxes in real-life situations where the electron beam has non-zero angular divergence
Development of a 20 MeV Dielectric-Loaded Accelerator Test Facility

International Nuclear Information System (INIS)

Gold, Steven H.; Fliflet, Arne W.; Kinkead, Allen K.; Gai Wei; Power, John G.; Konecny, Richard; Jing Chunguang; Tantawi, Sami G.; Nantista, Christopher D.; Hu, Y.; Chen, H.; Tang, C.; Lin, Y.; Bruce, Ralph W.; Bruce, Robert L.; Lewis, David III

2004-01-01

This paper describes a joint project by the Naval Research Laboratory (NRL) and Argonne National Laboratory (ANL), in collaboration with the StanFord Linear Accelerator Center (SLAC), to develop a dielectric-loaded accelerator (DLA) test facility powered by a high-power 11.424-GHz magnicon amplifier. The magnicon can presently produce 25 MW of output power in a 250-ns pulse at 10 Hz, and efforts are in progress to increase this to 50 MW. The facility will include a 5 MeV electron injector being developed by the Accelerator Laboratory of Tsinghua University in Beijing, China. The DLA test structures are being developed by ANL, and some have undergone testing at NRL at gradients up to ∼8 MV/m. SLAC is developing a means to combine the two magnicon output arms, and to drive an injector and accelerator with separate control of the power ratio and relative phase. RWBruce Associates, Inc., working with NRL, is developing a means to join short ceramic sections into a continuous accelerator tube by ceramic brazing using an intense millimeter-wave beam. The installation and testing of the first dielectric-loaded test accelerator, including injector, DLA structure, and spectrometer, should take place within the next year. The facility will be used for testing DLA structures using a variety of materials and configurations, and also for testing other X-band accelerator concepts. The initial goal is to produce a compact 20 MeV dielectric-loaded test accelerator
Numerical investigation of heat transfer and friction factor characteristics in a circular tube fitted with V-cut twisted tape inserts.

Science.gov (United States)

Salman, Sami D; Kadhum, Abdul Amir H; Takriff, Mohd S; Mohamad, Abu Bakar

2013-01-01

Numerical investigation of the heat transfer and friction factor characteristics of a circular fitted with V-cut twisted tape (VCT) insert with twist ratio (y = 2.93) and different cut depths (w = 0.5, 1, and 1.5 cm) were studied for laminar flow using CFD package (FLUENT-6.3.26). The data obtained from plain tube were verified with the literature correlation to ensure the validation of simulation results. Classical twisted tape (CTT) with different twist ratios (y = 2.93, 3.91, 4.89) were also studied for comparison. The results show that the enhancement of heat transfer rate induced by the classical and V-cut twisted tape inserts increases with the Reynolds number and decreases with twist ratio. The results also revealed that the V-cut twisted tape with twist ratio y = 2.93 and cut depth w = 0.5 cm offered higher heat transfer rate with significant increases in friction factor than other tapes. In addition the results of V-cut twist tape compared with experimental and simulated data of right-left helical tape inserts (RLT), it is found that the V-cut twist tape offered better thermal contact between the surface and the fluid which ultimately leads to a high heat transfer coefficient. Consequently, 107% of maximum heat transfer was obtained by using this configuration.
Design of power oscillator for 500 keV/20 mA Cockroft-Walton high voltage supply

International Nuclear Information System (INIS)

Djasiman; Sudjatmoko; Suprapto

1999-01-01

A design of power oscillator for Cockroft-Walton high voltage supply was carried out. This high voltage supply would be used as the acceleration voltage supply of an electron beam machine designed to have 500 keV/20 mA capacity. The power oscillator design consisted of output specification, circuit diagram, power supply and oscillator main components determinations. The power oscillator output wave power, voltage and frequency designed according to voltage multiplier input requirements. The design results showed that the circuit was class-c tickler oscillator having an output specification of 12.1 kW, 15 kV and 40 kHz sinus wave. The main component was a ITK 15-2 triode tube. (author)
Pion-proton elastic scattering at 20 and 50 GeV/c incident momenta in the momentum transfer range 0.7 2

International Nuclear Information System (INIS)

Asa'd, Z.; Coupland, M.; Davis, D.G.; Duff, B.G.; Gjerpe, I.; Heymann, F.F.; Imrie, D.C.; Lowndes, R.; Lush, G.J.; Phillips, M.; Baglin, C.; Poulet, M.; Yvert, M.; Benso, S.; Buzzo, A.; Ferroni, S.; Gracco, V.; Macri, M.; Santroni, A.; Brobakken, K.; Bugge, L.; Buran, T.; Fearnley, T.; Helgaker, P.; Kirsebom, K.; Moe, A.; Soerensen, S.O.; Hansen, J.D.; Myrheim, J.; Skjevling, G.

1982-01-01

Measurements of the differential elastic cross sections for π - p scattering at incident momenta of 20 and 50 GeV/c and π + p at 50 GeV/c in the momentum transfer range 0.7 2 are presented. The data are compared with various models of elastic scattering. (orig.)
On low-resistance neutral earthing mode in 20 kV overhead and cable networks

Directory of Open Access Journals (Sweden)

Mayorov Andrey

2017-01-01

Full Text Available The problems of justification and selection of the required single-phase short-circuit current values in cable and overhead networks of 20 kV with low-resistance neutral earthing are considered. It is shown that the desired values of the short-circuit current can be determined on the basis of harmonization of conflicting influencing factors: reliability of the relay protection and automation devices and required resistances of the earthing devices of electrical installations, including personnel safety. In this case, the main influencing factor is the electrical network structure and parameters

Microscopical investigation of steamside oxide on X20CrMoV121 superheater tubes

DEFF Research Database (Denmark)

Montgomery, Melanie; Hansson, Anette Nørgaard; Jensen, Søren A.

2011-01-01

X20CrMoV121 is a 12%Cr martensitic steel which has been used in power plants in Europe for many decades. Superheater tubes exposed for various durations up to 135,000 hours in power plants in Denmark at steam temperatures varying from 450 to 575°C were investigated. Light optical and scanning ele...... electron microscopy was used to investigate steamside oxide morphologies. At all temperatures there is a double layered oxide, however, the inner:outer oxide thickness is not always equal. At the lower steam temperature range of...
New Numerical Treatment for Solving the KDV Equation

Directory of Open Access Journals (Sweden)

khalid ali

2017-01-01

Full Text Available In the present article, a numerical method is proposed for the numerical solution of the KdV equation by using collocation method with the modified exponential cubic B-spline. In this paper we convert the KdV equation to system of two equations. The method is shown to be unconditionally stable using von-Neumann technique. To test accuracy the error norms2L, ?L are computed. Three invariants of motion are predestined to determine the preservation properties of the problem, and the numerical scheme leads to careful and active results. Furthermore, interaction of two and three solitary waves is shown. These results show that the technique introduced here is easy to apply.
Np(VI)/Np(V) in concentrated carbonate medium; Np(VI)Np(V) en milieu carbonate concentre

Energy Technology Data Exchange (ETDEWEB)

Offerle, S.; Capdevila, H.; Vitorge, P.

1995-02-01

The formal potential, E, of the Np (VI)Np(V) redox couple is measured versus a Ag/AgC1 electrode with junction potential less than 0.002 V, by using cyclic voltammetry in 0.22, 0.55, 1, 1.25 and 1.5 M Na{sub 2}CO{sub 3} solutions, and at T = 5, 15, 25, 35, 45, 55 and 60 deg. C. At each T, E is extrapolated to I 0 (I: ionic strength) by using the Specific Interaction Theory (SIT) formula E(I) E(0) + 9 a{radical}I/1+ Ba{sub i}{radical}I + 2 {delta}{xi}m. At each I, E data are fitted to a second order polynomial expression as a function of T, to deduce the entropy change, {delta}S, and the heat capacity change, {delta}Cp. The variations of {delta}S and {delta}Cp with I calculated by using formulae deduced from the SIT one, are consistent with the data. In the standard conditions E deg.=0.341 {+-} 0.017 V/ESH, {delta}Sdeg. = -190 {+-} 5 J/K/mol, {delta}Cpdeg. -345{+-}750 J/K/mol. {delta}{xi} = 0,15 + 0,05 -(0,005{+-}0,001){delta}T + 0,00004 {delta}T{sup 2} kg /mol, where {delta}T=T-25 deg.C. These numerical values are consistent with the U and Pu ones. The redox potential measured in 1 M Na{sub 2}CO{sub 3} solution, is greater by about 0.06 V than the published ones. Junction potentials might account for this difference. Supplementary materials are added, concerning the calculation of activity of water in a weak electrolyte, and on correlation between the numerical values of {xi}, or with ionic radius. (authors). 12 refs., 20 figs., 19 tabs.
Analysis of the Air Cooling for 350 keV/20 mA Electron Beam Machine Rooms

International Nuclear Information System (INIS)

Sutadi; Suprapto; Suyamto; Sukaryono

2003-01-01

It has been analyzed the cooling capacity for 350 keV/20 mA electron beam machine rooms at P3TM. The analysis of cooling load based on the building construction and the device for supported the electron beam machines operation, were obtained head dissipation and provided the cooling load. From the result it can be determined that for cooling the electron beam machine rooms with 945 m cubic of volume and supporter device in the room, in order to reach the air condition about 20 o C of temperatures and 50 % of relative humidity for the electron beam machine rooms, it was needed the air conditioning system with total cooling capacity about 213.000 BTU/Hours. (author)
Reevaluation and Validation of the 241Pu Resonance Parameters in the Energy Range Thermal to 20 eV

International Nuclear Information System (INIS)

Derrien, H.; Leal, L.C.; Courcelle, A.; Santamarina, A.

2005-01-01

A new SAMMY analysis of the 241 Pu resonance parameters from thermal to 20 eV is presented. This evaluation takes into account the trends given by integral experiments [post-irradiation experiments performed in French pressurized water reactors (PWRs)]. Compared to the previous evaluations performed by Derrien and de Saussure, the capture cross section increases especially in the 0.26-eV resonance. It is shown that the new resonance parameters proposed in this work improve the prediction of the 242 Pu buildup in a PWR, which was significantly underestimated with the previous evaluations
Secondary standards (non-activation) for neutron data measurements above 20 MeV

International Nuclear Information System (INIS)

Haight, R.C.

1991-01-01

In addition to H(n,p) scattering and 235,238 U(n,f) reactions, secondary standards for neutron flux determination may be useful for neutron energies above 20 MeV. For experiments where gamma rays are detected, reference gamma-ray production cross sections are relevant. For neutron-induced charged particle production, standard (n,p) and (n,alpha) cross sections would be helpful. Total cross section standards would serve to check the accuracy of these measurements. These secondary standards are desirable because they can be used with the same detector systems employed in measuring the quantities of interest. Uncertainties due to detector efficiency, geometrical effects, timing and length of flight paths can therefore be significantly reduced. Several secondary standards that do not depend on activation techniques are proposed. 14 refs
A numerical approach for size optimization and performance prediction of solar P V-hybrid power systems

International Nuclear Information System (INIS)

Zahedi, A.; Calia, N.

2001-10-01

Iran is blessed with an abundance of sunlight almost all year round. so obviously, with the right planning and strategies that are coupled to the right technology and development in the market, the potential for the new renewable energies, specially solar photovoltaic, as an alternative source of power looks promising and is constantly gaining popularity. Development and application of new renewable energy in Iran, however, is still in its infancy and will require active support by government, utilities and financing institutions. some experts might argue that Iran has plenty of natural resources like oil and gas. We should not forget, however, that even in countries with cheap fossil energy, the P V system is an economical option in supplying electricity for remote located communities and facilities. But there are good reasons suggesting that like many other countries in the world, Iran also needs to be active in utilization of sun energy. The objectives of this paper are: to give a comprehensive overview on the current solar photovoltaic energy technology. (Authors of this paper believe that Photovoltaic is the most appropriate renewable energy technology for Iran); to present the results obtained from a study which has been carried out on the size optimization, cost calculation of the photovoltaic systems for climate conditions of Iran. The method presented in this paper can be used for systems of any size and application. A further objective of this paper is to present a numerical approach for evaluating the performance of P V-Hybrid power systems. A method is developed to predict the performance of all components integrated into a P V-hybrid system. The system under investigation is a hybrid power system, in which the integrated components are P V array, a battery bank for backing up the system and a diesel generator set for supporting the battery bank. State of charge of batteries is used as a measure for the performance of the system. The running time of
Model calculation of neutron reaction data for {sup 31}P in the energy range from 0.1 to 20 MeV

Energy Technology Data Exchange (ETDEWEB)

Jiangting, Li [Physics Department, Northwest Univ., Xi' an (China); Zhigang, Ge [China Nuclear Data Center, China Inst. of Atomic Energy, Beijing (China); Xiuquan, Sun [Engineering and Technology Department, Shenzhen University, Shenzhen (China)

2006-07-15

The neutron data calculation of {sup 31}P in the energy range from 0.1 to 20 MeV was carried out. The neutron optical potential parameters for {sup 31}P in energy range from O.1 to 20 MeV were obtained, based on the fitting of the available neutron experimental data with the code APOM94. The DWUCK4 code was used to investigate the cross section for neutron direct inelastic scattering. The re-evaluated neutron data is based on the available measured data by using the UNF code. The theoretical results reproduce the experimental data well, and the results were given in ENDF/B-6 format. (authors)
Neutron-deuteron elastic scattering and breakup reactions below 20 MeV

Energy Technology Data Exchange (ETDEWEB)

Howell, C.R.; Tornow, W.; Pfuetzner, H.G.; Roberts, M.L.; Murphy, K.; Felsher, P.D.; Weisel, G.J.; Mertens, G.; Walter, R.L. (Duke Univ. and Triangle Universities Nuclear Lab., Durham, NC (USA)); Lambert, J.M.; Treado, P.A. (Physics Dept., Georgetown Univ., Washington, DC (USA)); Slaus, I. (Rudjer Boskovic Inst., Zagreb (Yugoslavia))

1991-05-01

In this paper we review the results of a series of high-accuracy measurements on the neutron-deuteron (n-d) scattering system at incident neutron energies below 20 MeV. These measurements were designed to: 1) provide data of sufficient accuracy to be used to refine the parametrization of the nucleon-nucleon force, 2) to test the reaction dynamics in the ''rigorous'' calculations of three-nucleon (3N) breakup reactions, and 3) identify 3N scattering observables that are specifically sensitive to three-nucleus forces and/or off-shell effects. At TUNL we have measured vector analyzing powers A{sub y}({theta}) for n-d elastic scattering and the breakup reaction to an accuracy better than {+-}0.005 and {+-}0.020, respectively. Recent results on items 1) and 2) will be presented. Also, results of cross-section measurements for n-d and p-d breakup will be compared to a ''rigorous'' 3N calculation. (orig.).
Neutron-deuteron elastic scattering and breakup reactions below 20 MeV

International Nuclear Information System (INIS)

Howell, C.R.; Tornow, W.; Pfuetzner, H.G.; Roberts, M.L.; Murphy, K.; Felsher, P.D.; Weisel, G.J.; Mertens, G.; Walter, R.L.; Lambert, J.M.; Treado, P.A.; Slaus, I.

1991-01-01

In this paper we review the results of a series of high-accuracy measurements on the neutron-deuteron (n-d) scattering system at incident neutron energies below 20 MeV. These measurements were designed to: 1) provide data of sufficient accuracy to be used to refine the parametrization of the nucleon-nucleon force, 2) to test the reaction dynamics in the ''rigorous'' calculations of three-nucleon (3N) breakup reactions, and 3) identify 3N scattering observables that are specifically sensitive to three-nucleus forces and/or off-shell effects. At TUNL we have measured vector analyzing powers A y (θ) for n-d elastic scattering and the breakup reaction to an accuracy better than ±0.005 and ±0.020, respectively. Recent results on items 1) and 2) will be presented. Also, results of cross-section measurements for n-d and p-d breakup will be compared to a ''rigorous'' 3N calculation. (orig.)
Inelastic hadron-nucleus interactions at 20 and 37 GeV/c

International Nuclear Information System (INIS)

Faessler, M.A.; Lynen, U.; Niewisch, J.; Pietrzyk, B.; Povh, B.; Schroeder, H.; Gugelot, P.C.

1979-01-01

The experiment studies charged particle production for π - , K - , and anti p interactions on nuclei at 20 and 37 GeV/c at the CERN SPS. A non-magnetic detector, consisting of CsI(Tl) scintillation and lucite Cerenkov counters, distinguishes between fast particles, mainly pions, and slow particles, mainly nucleons, with a cut at velocity β approximately 0.7. Angular distributions, multiplicity distributions and correlations of slow and fast particles were analysed. It is shown that the measurement of the correlations can provide a critical test for different theoretical models of the hadron-nucleus interaction. At the energies studied so far a systematic deviation from KNO scaling is observed. This gives further support to the 'standard picture' of the hadron-nucleus interaction and it contrasts with predictions of the coherent-tube model. The regularity observed for the angular distribution of fast secondaries as a function of the number of slow particles can only be explained by combining features predicted by different models. (Auth.)
The quasi-monochromatic photon beam used in photoneutron experiments from 20-120 MeV at the 600 MeV Saclay Linac

International Nuclear Information System (INIS)

Veyssiere, A.; Beil, H.; Bergere, R.; Carlos, P.; Fagot, J.; Lepretre, A.; Ahrens, J.

1979-01-01

A beam of 20-130 MeV positrons, with average intensities between 10 nA and 50 nA, is used at the 600 MeV Saclay Linac to create a quasi-monochromatic photon beam with a continuously variable energy. This beam was used to measure photoneutron cross sections and the corresponding photonuclear facility is first described. The computer-controlled methods, implemented to measure the energy spectrum and the emittance of the positron beam are described. The quasi-monochromatic photon lines are produced by the annihilation in flight of monoenergetic positrons in two annihilation radiators with different Z successively. The photon beam emission angle theta is shown to be the most critical parameter in the search for an optimum overall signal to background ratio for a specific photoneutron experiment. The choice of an angle theta approximately 4 0 is explained for absolute measurements of sigma(γ, xn) cross-sections, for which the used average intensities of monochromatic photons were thus purposely reduced to approximately 5 X 10 3 s -1 , with an energy resolution approximately 12%. (Auth.)
SCC and Corrosion Fatigue characterization of a Ti-6Al-4V alloy in a corrosive environment – experiments and numerical models

Directory of Open Access Journals (Sweden)

S. Baragetti

2014-10-01

Full Text Available In the present article, a review of the complete characterization in different aggressive media of a Ti-6Al-4V titanium alloy, performed by the Structural Mechanics Laboratory of the University of Bergamo, is presented. The light alloy has been investigated in terms of corrosion fatigue, by axial fatigue testing (R = 0.1 of smooth and notched flat dogbone specimens in laboratory air, 3.5% wt. NaCl–water mixture and methanol–water mixture at different concentrations. The first corrosive medium reproduced a marine environment, while the latter was used as a reference aggressive environment. Results showed that a certain corrosion fatigue resistance is found in a salt water medium, while the methanol environment caused a significant drop – from 23% to 55% in terms of limiting stress reduction – of the fatigue resistance of the Ti-6Al-4V alloy, even for a solution containing 5% of methanol. A Stress Corrosion Cracking (SCC experimental campaign at different methanol concentrations has been conducted over slightly notched dog-bone specimens (Kt = 1.18, to characterize the corrosion resistance of the alloy under quasi-static load conditions. Finally, crack propagation models have been implemented to predict the crack propagation rates for smooth specimens, by using Paris, Walker and Kato-Deng-Inoue-Takatsu propagation formulae. The different outcomes from the forecasting numerical models were compared with experimental results, proposing modeling procedures for the numerical simulation of fatigue behavior of a Ti-6Al-4V alloy.
Studies of projectile-like fragments in the 16O + 238U reaction at 20 MeV/u

International Nuclear Information System (INIS)

Dyer, P.; Awes, T.C.; Gelbke, C.K.; Back, B.B.; Mignerey, A.C.; Wolf, K.L.; Breuer, H.; Viola, V.E.; Meyer, W.G.

1979-01-01

Projectile residues were studied in coincidence with angle-correlated fission fragments resulting from reactions of 20-MeV/u 16 O ions on 238 U. Distributions of the missing parallel momentum are shown for different projectile residues, and the dependence of the average parallel recoil momentum on the average parallel momentum of the projectile residue is plotted. 2 figures
Calculations of (n,2n) reaction cross sections for Barium isotopes from 5 to 20 MeV

Science.gov (United States)

Sahan, Halide; Sahan, Muhittin; Tel, Eyyup

2017-09-01

In this study, the excitation functions of (n,2n) reactions for 30,32,34,35,37,38Ba isotopes are calculated using TALYS 1.6, EMPIRE-3.2.2, and ALICE-GDH codes based on statistical model up to 20 MeV. Moreover, the cross section for each isotope have also been estimated at 14.2 MeV using semi empirical formula developed by four different authors. The calculated and estimated cross-sections are compared with experimental cross-sections from EXFOR and compared with the evaluation data in ENDF/B-VII.1 library. Results are close agreement with the experimental data from literature.
Total cross sections ν μ and ḡn μcharged-current interactions between 20 and 200 GeV

Science.gov (United States)

Bosetti, P.; Deden, H.; Fritze, P.; Grässler, H.; Hasert, F. J.; Schulte, R.; Böckmann, K.; Kokott, Th.; Nellen, B.; Wünsch, B.; Cundy, D. C.; Grant, A.; Hulth, P. O.; Klein, H.; Morrison, D. R. O.; Pagiola, E.; Pape, L.; Peyrou, Ch.; Scott, W. G.; Wachsmuth, H.; Simopoulou, E.; Vayaki, A.; Barnham, K. W. J.; Butterworth, I.; Iaselli, G.; Miller, D. B.; Mobayyen, M.; Penfold, C.; Petrides, A.; Powell, K. J.; Albajar, C.; Perkins, D. H.; Radojicic, D.; Saitta, B.; Bolognese, T.; Tallini, B.; Velasco, J.; Vignaud, D.; Aachen-Bonn-Cern-Demokritos-London-Oxford-Saclay Collaboration

1982-03-01

Exposures of the Ne/H 2 filled Big European Bubble Chamber (BEBC) to a dichromatic neutrino (antineutrino) beam produced by 400 GeV protons of the CERN SPS yielded ∼ 3100 events with a negative, and ∼ 1100 with a positive, muon. The neutrino flux is determined from the muon flux in the shielding. Assuming a linear energy dependence of the cross section, the values {σ}/{E} between 20 and 200 GeV are found to be 0.657 ± 0.012 (stat.) ± 0.027 (syst.) and 0.309 ± 0.009 (stat.) ± 0.013 (syst.) cm 2 (GeV nucleon) -1, for neutrinos and antineutrinos, respectively. The scaling variable {q 2}/{E} decreases significantly with increasing energy both for neutrinos and antineutrinos.
Search for cosmic γ-point sources above 20 TeV with the HEGRA detector fields

International Nuclear Information System (INIS)

Prahl, J.

1999-01-01

The topic of this thesis is the search for point sources of high energy γ-rays (above 20 TeV) during the time interval from December 1993 until September 1995 with the HEGRA scintillator and AIROBICC arrays. The main aim is to exploit the available data as complete as possible in order to achieve a maximum in sensitivity. A thorough MtCarlo simulation of the registered events from the cosmic-ray-induced air showers allows for the use of all acquired events [de
NOAA-CIRES 20th Century Reanalysis (V2)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The 20th Century Reanalysis version 2 (20CRV2)is an effort led by PSD and the CIRES at the University of Colorado to produce a reanalysis dataset spanning the entire...
Tensile properties and microstructure of helium-injected and reactor-irradiated V-20 Ti

International Nuclear Information System (INIS)

Tanaka, M.P.; Bloom, E.E.; Horak, J.A.

1981-01-01

Mechanical properties and microstructure of vanadium-20% titanium were examined following helium-injection and reactor irradiation. Helium was injected at ambient temperature to concentrations of 90 and 200 at. ppM; neutron irradiation was at 400, 575, 625, and 700 0 C to fluence of 3 x 10 26 n/m 2 , E > 0.1 MeV. Cavities representing negligible volume swelling were observed in all helium-injected specimens. Degradation of mechanical properties, especially loss of ductility due to helium, occurred at temperatures of 625 and 700 0 C. The levels of helium produced in the fusion spectrum can be expected to alter the response of vanadium alloys from that observed in fast reactor irradiations
Tensile properties and microstructure of helium-injected and reactor-irradiated V-20 Ti

Energy Technology Data Exchange (ETDEWEB)

Tanaka, M.P.; Bloom, E.E.; Horak, J.A.

1981-01-01

Mechanical properties and microstructure of vanadium-20% titanium were examined following helium-injection and reactor irradiation. Helium was injected at ambient temperature to concentrations of 90 and 200 at. ppM; neutron irradiation was at 400, 575, 625, and 700/sup 0/C to fluence of 3 x 10/sup 26/ n/m/sup 2/, E > 0.1 MeV. Cavities representing negligible volume swelling were observed in all helium-injected specimens. Degradation of mechanical properties, especially loss of ductility due to helium, occurred at temperatures of 625 and 700/sup 0/C. The levels of helium produced in the fusion spectrum can be expected to alter the response of vanadium alloys from that observed in fast reactor irradiations.

Autonomy, Affinity, and the Assessment of Damages: Acb v Thomson Medical Pte Ltd [2017] SGCA 20 and Shaw v Kovak [2017] EWCA Civ 1028.

Science.gov (United States)

Purshouse, Craig

2017-11-17

In ACB v Thomson Medical Pte Ltd [2017] SGCA 20 and Shaw v Kovak [2017] EWCA Civ 1028, the idea that 'lost autonomy' should be recognised as a new form of actionable damage in the tort of negligence was rejected in Singapore and England, respectively. This, it will be argued, was the correct outcome. Protecting an interest in autonomy via the tort of negligence would undermine the coherence of that tort. In ACB, however, a new, different, form of damage was recognised: loss of 'genetic affinity'. This commentary will discuss some problems that protecting an interest in 'genetic affinity' raises before critiquing the approach to assessing damages in ACB. © The Author 2017. Published by Oxford University Press; all rights reserved. For Permissions, please email: journals.permissions@oup.com.
The design and construction of a scintillation pair spectrometer for the detection of {gamma}-rays in the energy range 2-20 MeV; Realisation d'un spectrometre a scintillations et a paires pour la detection des rayonnements {gamma} d'energie comprise entre 2 et 20 MeV

Energy Technology Data Exchange (ETDEWEB)

Longequeue, J P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-15

The scintillation pair spectrometer is designed to allow the measurement of the energy of {gamma} rays in the range 2 to 20 MeV. Such an instrument is chosen because of its main features: high energy resolution and ease of working. Against this, however, the efficiency is low. It was possible to tolerate this low efficiency because of the facts that the {gamma}-rays studied emanated from (p, {gamma}) reactions and that the two electrostatic acceleration available could provide beams of 500 {mu}A having energy maxima at 300 and 600 keV. We used the {gamma} rays produced by the reactions {sup 23}Na (p, {gamma}) {sup 24}Mg, {sup 19}F (p, {alpha} {gamma}) {sup 16}O and {sup 7}Li (p, {gamma}) {sup 8}Be as well as the {gamma} rays emitted by sources of RTh and of {sup 24}Na. Under these conditions the spectrometer attained a resolving power of 6,5 {+-} 0,5 per cent at 6,1 MeV and it was able to separate the 14,8 and 17,6 MeV lines produced by the reaction {sup 7}Li (p, {gamma}) {sup 8}Be. As well as this, the efficiency which varied from 2.10{sup -4} to 1,7.10{sup -3} between 2 and 20 MeV was well above the efficiencies already obtained with this type of instrument. (author) [French] Le spectrometre a scintillations et a paires presente dans cette these a pour but de mesurer l'energie des rayonnements {gamma} dans la bande de 2 a 20 MeV. Le choix d'un tel appareil est du a ses caracteristiques essentielles: bonne resolution en energie et maniabilite. Par contre, son efficacite est faible. Nous avons pu tolerer cette faible efficacite car les rayonnements {gamma} que nous avons etudies provenaient de reactions (p, {gamma}) et les deux accelerateurs electrostatiques dont nous disposions pouvaient fournir des faisceaux de 500 {mu}A avec des energies maximum de 300 et 600 keV. Nous avons utilise les rayonnements {gamma} produits par les reactions {sup 23}Na (p, {gamma}) {sup 24}Mg, {sup 19}F (p, {alpha} {gamma}) {sup 16}O et {sup 7}Li (p, {gamma}) {sup 8}Be ainsi que les
Calculations of complete data for n + 89Y in the energy region 0.001∼20 MeV

International Nuclear Information System (INIS)

Cai Chonghai

1998-01-01

All reaction cross sections, secondary neutron spectra and elastic scattering angular distributions of n + 89 Y in E n = 0.001 ∼20 MeV are calculated. Pretty good results in accordance with experimental data are obtained. And the data results are given in ENDF/B-6 format
Determination of the 20 MeV linear accelerator, new injector for the synchrotron Saturne. Choice of the electrical and dynamical particle parameters; Determination de l'accelerateur lineaire de 20 MeV, nouvel injecteur du synchrotron Saturne. Choix des parametres electriques, dynamique des particules

Energy Technology Data Exchange (ETDEWEB)

Prome, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-12-15

This report takes place in the general determination of the 20 MeV linear accelerator which will be the new Saturne injector; it deals with particle dynamics. Starting from beam requirements at the output of the linac, cells lengths with variable synchronous phase angle, buncher and de-buncher parameters, beam emittances at the output in several phase spaces are successively determined. (author) [French] Dans le contexte general de la determination de l'accelerateur lineaire de 20 MeV, nouvel injecteur du synchrotron Saturne, ce rapport traite de la partie relative au mecanisme de l'acceleration des particules; a partir des caracteristiques souhaitees pour le faisceau a la sortie de cet accelerateur, on determine successivement les longueurs des cellules, compte tenu du choix d'un angle de phase synchrone variable, les caracteristiques du groupeur et du degroupeur et les emittances du faisceau en sortie dans les differents plans de phase. (auteur)
On a generalized fifth order KdV equations

International Nuclear Information System (INIS)

Kaya, Dogan; El-Sayed, Salah M.

2003-01-01

In this Letter, we dealt with finding the solutions of a generalized fifth order KdV equation (for short, gfKdV) by using the Adomian decomposition method (for short, ADM). We prove the convergence of ADM applied to the gfKdV equation. Then we obtain the exact solitary-wave solutions and numerical solutions of the gfKdV equation for the initial conditions. The numerical solutions are compared with the known analytical solutions. Their remarkable accuracy are finally demonstrated for the gfKdV equation
Energy dependence of effective atomic numbers for photon energy absorption and photon interaction: Studies of some biological molecules in the energy range 1 keV-20 MeV

DEFF Research Database (Denmark)

Manohara, S.R.; Hanagodimath, S.M.; Gerward, Leif

2008-01-01

Effective atomic numbers for photon energy absorption, Z(PEA,eff), and for photon interaction, Z(PI,eff), have been calculated by a direct method in the photon-energy region from 1 keV to 20 MeV for biological molecules, such as fatty acids (lauric, myristic, palmitic, stearic, oleic, linoleic......, linolenic, arachidonic, and arachidic acids), nucleotide bases (adenine, guanine, cytosine, uracil, and thymine), and carbohydrates (glucose, sucrose, raffinose, and starch). The Z(PEA, eff) and Z(PI, eff) values have been found to change with energy and composition of the biological molecules. The energy...
Modification of EXIFON code and analysis of O16+n reactions in En=20-50 MeV

Energy Technology Data Exchange (ETDEWEB)

Murata, Toru [Nippon Nuclear Fuel Development Co. Ltd., Oarai, Ibaraki (Japan)

1997-03-01

To evaluate the nuclear data concerning neutron induced reactions of O-16 and N-14 in the incident energy range of 20-50 MeV, the statistical multistep reaction code EXIFON was modified to include the outgoing channels of deuteron, triton and He-3. The calculated double differential cross sections (DDXs) with the modified code are compared with experimental DDXs. (author)
Theoretical model application to the evaluation of fission neutron data up to 20 MeV incidence energy

International Nuclear Information System (INIS)

Ruben, A.; Maerten, H.; Seeliger, D.

1990-01-01

A complex statistical theory of fission neutron emission combined with a phenomenological fission model has been used to calculate fission neutron data for 238 U. Obtained neutron multiplicities and energy spectra as well as average fragment energies for incidence energies from threshold to 20 MeV (including multiple-chance fission) are compared with traditional data representations. (author). 19 refs, 6 figs
Aplikovaná tělesná výchova v USA v první polovině 20. století American adapted physical education in the first half of the 20th century

Directory of Open Access Journals (Sweden)

Martin Kudláček

2006-02-01

Full Text Available Aplikovaná tělesná výchova se v USA vyvinula z léčebné, zdravotní tělesné výchovy. Původní vliv švédské léčebné tělesné výchovy na americké vysoké školy mají "na svědomí" Hartwig Nissen (1855–1924, Nils Posse (1862–1895 a William Skarstrom (1896–1951. Mezi první americké průkopníky zdravotní tělesné výchovy patřily Lilian Curtis Drew a Louisa Lipin. Korektivní přístup zdravotní tělesné výchovy byl dominantní v období 1920–1950. Vůdčími osobnostmi té doby byli Charles Kosman (1879–1977, George Stafford (1894–1968 a Josephina Rathbone (1899–1989. Tito odborníci v té době velmi úzce spolupracovali s fyzioterapeuty. Velký počet veteránů z druhé světové války způsobil významné změny v přístupu k pohybovým aktivitám osob se zdravotním postižením. Toto později vedlo k oddělení korektivní fyzioterapie od aplikované tělesné výchovy v roce 1952. Adapted physical education in the U. S. has evolved from medical, corrective gymnastics. The original influence of Swedish gymnastics was passed on to American Universities via Hartwig Nissen (1855–1924, Nils Posse (1862–1895 and William Skarstrom (1896–1951. The first American leaders of corrective gymnastics were Lillian Curtis Drew and Louisa Lippitt. The corrective approach was the philosophy of physical education for students with special needs from the 1920 till the 1950. Leaders of APE in that era were Charles Lowman (1879–1977, George Stafford (1894–1968 and Josephine Rathbone (1899–1989. They very closely cooperated with physical therapists. A great number of World War II veterans influenced the major changes in sport for people with disabilities. World War II significantly changed the approach to physical activities for people with disabilities, which led to the separation of corrective physical therapy and adapted physical education in 1952.
/sup 1/H(t,n)/sup 3/He reaction as monoenergetic neutron source in the (10/20) MeV energy interval

Energy Technology Data Exchange (ETDEWEB)

Zago, G. (Padua Univ. (Italy). Ist. di Fisica; Istituto Nazionale di Fisica Nucleare, Padua (Italy))

1981-11-14

This article examines the problem of finding a neutron source in the (10/20) MeV energy interval, having convenient properties for controlled thermonuclear-fusion researches and biomedical applications.
Equilibration in the reaction of 175 and 252 MeV 20Ne with 197Au

International Nuclear Information System (INIS)

Moulton, J.B.

1978-06-01

The highly inelastic nuclear reaction of 197 Au with 20 Ne at 175 and 252 MeV laboratory energies is studied. Energy-, elemental-, and angular- distributions for atomic numbers 5 to 30 (175 MeV) or 34 (252 MeV) are presented. The means and widths of the kinetic energy spectra for detected elements are compared with a theoretical calculation. The calculation postulates thermalization of the incident projectile kinetic energy, and includes one sha(e-vibrational degree of freedom and rigid rotation of the reaction complex. The effect of particle evaporation is considered. Good agreement of the expurimental mean energies with the theory is obtained. Poorer agreement of the kinetic energy widths with the theory may be due to a low-temperature quantal effect. The relative elemental yields are analyzed for their degree of equilibration, based on a model of diffusive nucleon exchange as described by the master equation. A similar degree of equilibration is observed for both reaction energies. The absolute elemental yields are reproduced qualitatively by employing an advanced diffusion code, coupled with calculation of the subsequent fission of heavy reaction products, including the compound nucleus. The angular distributions are analyzed with a simple model, to estimate the reaction lifetime of selected elements
Latitude SSTmax = 0 SSTmax = 10 SSTmax = 20

Indian Academy of Sciences (India)

. −10. −5. 0. 5. 10. V (m/s). −30. −20. −10. 0. 10. 20. 30. −10. −5. 0. 5. 10. Latitude. V (m/s). V Non−linear model. Non−linear advection term. Pressure gradient term. SSTmax = 0. SSTmax = 10. SSTmax = 20.
Numerical simulation of neutral injection in a hot-electron mirror target plasma

International Nuclear Information System (INIS)

Werkoff, F.; Bardet, R.; Briand, P.; Dupas, L.; Gormezano, C.; Melin, G.; Association Euratom-CEA, Centre d'Etudes Nucleaires de Grenoble, 38

1976-01-01

In the case of neutral injection into a hot-electron target plasma, the use of the existing Fokker-Planck codes is greatly complicated by the fact that the scale of the energies and times of the confined ions and electrons is very large. To avoid this difficulty, a simplified multi-species model is set up, in which each species is described by time-dependent density and energy equations with analytical approximations for the interactions between the species. During the neutral injection, instantaneous high values of the ambipolar potential (higher than the half value of hot-ion energy) may appear, but do not prevent hot-ion density build-up. However, the hot-electron target plasma must not be maintained for a too long time. Numerical runs are performed with typical target parameters: density 2x10 13 cm -3 , electron energy 30 keV, ion energy 400 eV, time duration during which the target density is maintained 1 ms. Hot-ion density, a few 10 14 cm -3 , can be achieved with a neutral beam of 100 A, 20 keV. (author)
Numerical Methods for Free Boundary Problems

CERN Document Server

1991-01-01

About 80 participants from 16 countries attended the Conference on Numerical Methods for Free Boundary Problems, held at the University of Jyviiskylii, Finland, July 23-27, 1990. The main purpose of this conference was to provide up-to-date information on important directions of research in the field of free boundary problems and their numerical solutions. The contributions contained in this volume cover the lectures given in the conference. The invited lectures were given by H.W. Alt, V. Barbu, K-H. Hoffmann, H. Mittelmann and V. Rivkind. In his lecture H.W. Alt considered a mathematical model and existence theory for non-isothermal phase separations in binary systems. The lecture of V. Barbu was on the approximate solvability of the inverse one phase Stefan problem. K-H. Hoff mann gave an up-to-date survey of several directions in free boundary problems and listed several applications, but the material of his lecture is not included in this proceedings. H.D. Mittelmann handled the stability of thermo capi...
Effects of anisotropic properties on bursting behavior of rectangular cup with a V-notch

Energy Technology Data Exchange (ETDEWEB)

Kim, Jeong Tai [R and D Center, TERA Co. Ltd., Seoul (Korea, Republic of); Kim, Sang Mok [R and D Center, Hyosung Power and Industrial Systems PG, Changwon (Korea, Republic of); Kang, Beom Soo [Dept. of Aerospace Engineering, Pusan National University, Busan (Korea, Republic of); Ku, Tae Wan [Engineering Research Center of Innovative Technology on Advanced Forming, Pusan National University, Busan (Korea, Republic of)

2016-09-15

Effects of mechanical anisotropic properties on bursting failure and its pressure of rectangular deep-drawn cup fabricated by using AA3005-H14 thin sheet are investigated to utilize for electrolyte container of lithium-ion secondary batteries. The V-notch shape with a depth of 0.1 mm and an angle of 20.0 degrees is defined on the rectangular cup, which has a thickness of 0.20 mm on the major surface and that of 0.30 mm on the minor surface. With the measured mechanical properties by uni-axial tensile tests and the defined V-notch geometry, a series of numerical prediction models considering isotropic, planar and normal anisotropic characteristics, are built-up and the bursting simulations are performed. Thereafter, the bursting fracture behavior is investigated by adopting ductile fracture criterion proposed by Cockcroft and Latham. The results predicted for the planar and the normal anisotropic models show that the bursting fracture pressure is well matched to 0.400 MPa, and the isotropic and the planar anisotropic models present a bursting fracture height of about 4.95 mm and 4.92 mm, respectively. A series of experimental investigations are undertaken to verify the bursting deformation that had been predicted. The bursting pressure and its height during experimental verifications are shown to be in good agreement with each variation of about 5.88% and roughly 0.20% with respect to the numerical results obtained using the planar anisotropic model.
LEP measurements of $V_{cb}$ and $V_{ub}$

CERN Document Server

Hawkings, R

2001-01-01

The measurements of the magnitudes of the CKM matrix elements V/sub cb/ and V/sub ub/ from LEP are reviewed. V/sub cb/ is measured using the decay B/sup 0/ to D*/sup +/l/sup -/ nu , whilst V/sub ub/ is measured using inclusive charmless semileptonic b decays. Particular attention is paid to the limiting systematic errors in each case. (20 refs).
Delta 2.0

DEFF Research Database (Denmark)

Skott, Jeppe; Skott, Charlotte Krog; Jess, Kristine

DELTA 2.0 er en ny og helt opdateret udgave af Delta, der i ti år været brugt i matematiklærernes grund-, efter- og videreuddannelse. DELTA 2.0 er seriens almene fagdidaktik. Der er også fagdidaktiske overvejelser i de øvrige bøger i serien, men de er knyttet til specifikt matematisk indhold. DELTA...... 2.0 behandler mere generelle matematikdidaktiske problemstillinger såsom læringsteoretiske overvejelser i forbindelse med matematik, centrale aspekter af det at undervise i matematik og digitale teknologier som værktøj til at støtte elevers faglige læring af matematik....
The 1H(t,n)3He reaction as monoenergetic neutron source in the (10/20) MeV energy interval

International Nuclear Information System (INIS)

Zago, G.

1981-01-01

The 1 H(t,n) 3 He reaction, considered as a neutron source in the (10/20) MeV energy interval, is a ''white'' neutron source having intensity, mean energy, and directionality which may prove advantageous in technological and biomedical researches. (author)
The level structure of 13C around Esub(x)=20 MeV studied by polarised neutron scattering from 12C

International Nuclear Information System (INIS)

Tornow, W.; Woye, E.

1987-01-01

Analysing-power data for elastic scattering of neutrons from 12 C have been obtained at selected angles in small energy steps between incident energies of 15.55 and 17.35 MeV. The excitation energy, spin and parity of levels in 13 C have been determined for excitation energies around 20 MeV via a phase-shift analysis of these data and of previously measured n- 12 C total cross section data. In addition, an auxiliary phase-shift analysis has been performed in the neutron energy range from 12 to 15 MeV. All experimental data are well reproduced by the phase shifts obtained. The need for further experimental data is pointed out. (author)
Measurement of deuteron induced gamma-ray emission differential cross sections on {sup nat}Cl from 1.0 to 2.0 MeV

Energy Technology Data Exchange (ETDEWEB)

Jokar, A., E-mail: arezajokar@gmail.com; Kakuee, O.; Lamehi-Rachti, M.

2016-06-15

In this research work, measured differential cross sections for gamma-ray emission from the nuclear reactions {sup 35}Cl(d,pγ{sub 1-0}){sup 36}Cl (E{sub γ} = 788 keV), {sup 35}Cl(d,pγ{sub 2-0}){sup 36}Cl (Eγ = 1165 keV), {sup 37}Cl(d,pγ{sub 1-0}){sup 38}Cl (E{sub γ} = 671 keV) and {sup 37}Cl(d,pγ{sub 2-0}){sup 38}Cl (E{sub γ} = 755 keV) are presented. For these measurements a thin natural BaCl{sub 2} target evaporated onto a 50 μm-thick Mo foil was used. The gamma-rays and backscattered deuterons were detected simultaneously. An HPGe detector placed at an angle of 90° with respect to the beam direction was employed to collect gamma-rays while an ion implanted Si detector placed at a scattering angle of 165° was used to detect backscattered deuterons. The validity of the obtained differential cross sections was verified through a thick target benchmarking experiment. The overall systematic uncertainty of cross section values was estimated to be ±10%.

Study of muon-pair production at centre-of-mass energies from 20 to 136 GeV with the ALEPH detector

Science.gov (United States)

Barate, R.; Buskulic, D.; Decamp, D.; Ghez, P.; Goy, C.; Lees, J.-P.; Lucotte, A.; Minard, M.-N.; Nief, J.-Y.; Odier, P.; Pietrzyk, B.; Casado, M. P.; Chmeissani, M.; Comas, P.; Crespo, J. M.; Delfino, M.; Fernandez, E.; Fernandez-Bosman, M.; Garrido, Ll.; Juste, A.; Martinez, M.; Orteu, S.; Padilla, C.; Park, I. C.; Pascual, A.; Perlas, J. A.; Riu, I.; Sanchez, F.; Teubert, F.; Colaleo, A.; Creanza, D.; de Palma, M.; Gelao, G.; Iaselli, G.; Maggi, G.; Maggi, M.; Marinelli, N.; Nuzzo, S.; Ranieri, A.; Raso, G.; Ruggieri, F.; Selvaggi, G.; Silvestris, L.; Tempesta, P.; Tricomi, A.; Zito, G.; Huang, X.; Lin, J.; Ouyang, Q.; Wang, T.; Xie, Y.; Xu, R.; Xue, S.; Zhang, J.; Zhang, L.; Zhao, W.; Abbaneo, D.; Alemany, R.; Bazarko, A. O.; Bright-Thomas, P.; Cattaneo, M.; Cerutti, F.; Drevermann, H.; Forty, R. W.; Frank, M.; Hagelberg, R.; Harvey, J.; Janot, P.; Jost, B.; Kneringer, E.; Knobloch, J.; Lehraus, I.; Lutters, G.; Mato, P.; Minten, A.; Miquel, R.; Mir, Ll. M.; Moneta, L.; Oest, T.; Pacheco, A.; Pusztaszeri, J.-F.; Ranjard, F.; Rensing, P.; Rizzo, G.; Rolandi, L.; Schlatter, D.; Schmelling, M.; Schmitt, M.; Schneider, O.; Tejessy, W.; Tomalin, I. R.; Venturi, A.; Wachsmuth, H.; Wagner, A.; Ajaltouni, Z.; Barrès, A.; Boyer, C.; Falvard, A.; Ferdi, C.; Gay, P.; Guicheney, C.; Henrard, P.; Jousset, J.; Michel, B.; Monteil, S.; Montret, J.-C.; Pallin, D.; Perret, P.; Podlyski, F.; Proriol, J.; Rosnet, P.; Rossignol, J.-M.; Fearnley, T.; Hansen, J. B.; Hansen, J. D.; Hansen, J. R.; Hansen, P. H.; Nilsson, B. S.; Rensch, B.; Wäänänen, A.; Daskalakis, G.; Kyriakis, A.; Markou, C.; Simopoulou, E.; Vayaki, A.; Zachariadou, K.; Blondel, A.; Brient, J. C.; Machefert, F.; Rougé, A.; Rumpf, M.; Valassi, A.; Videau, H.; Focardi, E.; Parrini, G.; Corden, M.; Georgiopoulos, C.; Jaffe, D. E.; Antonelli, A.; Bencivenni, G.; Bologna, G.; Bossi, F.; Campana, P.; Capon, G.; Casper, D.; Chiarella, V.; Felici, G.; Laurelli, P.; Mannocchi, G.; Murtas, F.; Murtas, G. P.; Passalacqua, L.; Pepe-Altarelli, M.; Curtis, L.; Dorris, S. J.; Halley, A. W.; Knowles, I. G.; Lynch, J. G.; O'Shea, V.; Raine, C.; Scarr, J. M.; Smith, K.; Teixeira-Dias, P.; Thompson, A. S.; Thomson, E.; Thomson, F.; Turnbull, R. M.; Becker, U.; Geweniger, C.; Graefe, G.; Hanke, P.; Hansper, G.; Hepp, V.; Kluge, E. E.; Putzer, A.; Schmidt, M.; Sommer, J.; Stenzel, H.; Tittel, K.; Werner, S.; Wunsch, M.; Beuselinck, R.; Binnie, D. M.; Cameron, W.; Dornan, P. J.; Girone, M.; Goodsir, S.; Martin, E. B.; Morawitz, P.; Moutoussi, A.; Nash, J.; Sedgbeer, J. K.; Stacey, A. M.; Williams, M. D.; Dissertori, G.; Girtler, P.; Kuhn, D.; Rudolph, G.; Betteridge, A. P.; Bowdery, C. K.; Colrain, P.; Crawford, G.; Finch, A. J.; Foster, F.; Hughes, G.; Jones, R. W.; Sloan, T.; Whelan, E. P.; Williams, M. I.; Hoffmann, C.; Jakobs, K.; Kleinknecht, K.; Quast, G.; Renk, B.; Rohne, E.; Sander, H.-G.; van Gemmeren, P.; Zeitnitz, C.; Aubert, J. J.; Benchouk, C.; Bonissent, A.; Buiosa, G.; Calvet, D.; Carr, J.; Coyle, P.; Diaconu, C.; Konstantinidis, N.; Leroy, O.; Payre, P.; Rousseau, D.; Talby, M.; Sadouki, A.; Thulasidas, M.; Tilquin, A.; Trabelsi, K.; Aleppo, M.; Ragusa, F.; Berlich, R.; Blum, W.; Büscher, V.; Dietl, H.; Dydak, F.; Ganis, G.; Gotzhein, C.; Kroha, H.; Lütjens, G.; Lutz, G.; Männer, W.; Moser, H.-G.; Richter, R.; Rosado-Schlosser, A.; Schael, S.; Settles, R.; Seywerd, H.; St. Denis, R.; Stenzel, H.; Wiedenmann, W.; Wolf, G.; Boucrot, J.; Callot, O.; Chen, S.; Cordier, A.; Davier, M.; Duflot, L.; Grivaz, J.-F.; Heusse, Ph.; Höcker, A.; Jacholkowska, A.; Jacquet, M.; Kim, D. W.; Le Diberder, F.; Lefrançois, J.; Lutz, A.-M.; Nikolic, I.; Park, H. J.; Schune, M.-H.; Simion, S.; Veillet, J.-J.; Videau, I.; Zerwas, D.; Azzurri, P.; Bagliesi, G.; Batignani, G.; Bettarini, S.; Bozzi, C.; Calderini, G.; Carpinelli, M.; Ciocci, M. A.; Ciulli, V.; dell'Orso, R.; Fantechi, R.; Ferrante, I.; Giassi, A.; Gregorio, A.; Ligabue, F.; Lusiani, A.; Marrocchesi, P. S.; Messineo, A.; Palla, F.; Sanguinetti, G.; Sciabà, A.; Spagnolo, P.; Steinberger, J.; Tenchini, R.; Tonelli, G.; Vannini, C.; Verdini, P. G.; Blair, G. A.; Bryant, L. M.; Chambers, J. T.; Gao, Y.; Green, M. G.; Medcalf, T.; Perrodo, P.; Strong, J. A.; von Wimmersperg-Toeller, J. H.; Botterill, D. R.; Clifft, R. W.; Edgecock, T. R.; Haywood, S.; Maley, P.; Norton, P. R.; Thompson, J. C.; Wright, A. E.; Bloch-Devaux, B.; Colas, P.; Kozanecki, W.; Lançon, E.; Lemaire, M. C.; Locci, E.; Perez, P.; Rander, J.; Renardy, J.-F.; Roussarie, A.; Schuller, J.-P.; Schwindling, J.; Trabelsi, A.; Vallage, B.; Black, S. N.; Dann, J. H.; Kim, H. Y.; Litke, A. M.; McNeil, M. A.; Taylor, G.; Booth, C. N.; Boswell, R.; Brew, C. A. J.; Cartwright, S.; Combley, F.; Kelly, M. S.; Letho, M.; Newton, W. M.; Reeve, J.; Thompson, L. F.; Affholderbach, K.; Böhrer, A.; Brandt, S.; Cowan, G.; Grupen, C.; Saraiva, P.; Smolik, L.; Stephan, F.; Apollonio, M.; Bosisio, L.; della Marina, R.; Giannini, G.; Gobbo, B.; Musolino, G.; Putz, J.; Rothberg, J.; Wasserbaech, S.; Williams, R. W.; Armstrong, S. R.; Elmer, P.; Feng, Z.; Ferguson, D. P. S.; Gao, Y. S.; González, S.; Grahl, J.; Greening, T. C.; Hayes, O. J.; Hu, H.; McNamara, P. A.; Nachtman, J. M.; Orejudos, W.; Pan, Y. B.; Saadi, Y.; Scott, I. J.; Walsh, J.; Sau, Lan Wu; Wu, X.; Yamartino, J. M.; Zheng, M.; Zobernig, G.

1997-02-01

The total cross section and the forward-backward asymmetry for the process e+e- -> μ+μ-(nγ) are measured in the energy range 20-136 GeV by reconstructing the effective centre-of-mass energy after initial state radiation. The analysis is based on the data recorded with the ALEPH detector at LEP between 1990 and 1995, corresponding to a total integrated luminosity of 143.5 pb-1. Two different approaches are used: in the first one an exclusive selection of events with hard initial state radiation in the energy range 20-88 GeV is directly compared with the Standard Model predictions showing good agreement. In the second one, all events are used to obtain a precise measurement of the energy dependence of σ0 and σ0 and A0FB from a model independent fit, enabling constraints to be placed on models with extra Z bosons.
The AMS-02 RICH Imager Prototype - In-Beam Tests with 20 GeV/c per Nucleon Ions -

CERN Document Server

Buenerd, M.; Aguilar Benitez, M.; Arruda, L.; Barao, F.; Barrau, A.; Baret, B.; Belmont, E.; Berdugo, J.; Boudoul, G.; Borges, J.; Casadei, D.; Casaus, J.; Delgado, C.; Diaz, C.; Derome, L.; Eraud, L.; Gallin-Martel, L.; Giovacchini, F.; Goncalves, P.; Lanciotti, E.; Laurenti, G.; Malinine, A.; Mana, C.; Marin, J.; Martinez, G.; Menchaca-Rocha, A.; Palomares, C.; Pimenta, M.; Protasov, K.; Sanchez, E.; Seo, E-S.; Sevilla, I.; Torrento, A.; Vargas-Trevino, M.

2003-01-01

A prototype of the AMS Cherenkov imager (RICH) has been tested at CERN by means of a low intensity 20 GeV/c per nucleon ion beam obtained by fragmentation of a primary beam of Pb ions. Data have been collected with a single beam setting, over the range of nuclear charges 2
Production of low energy gamma rays by neutron interactions with fluorine for incident neutron energies between 0.1 and 20 MeV

International Nuclear Information System (INIS)

Morgan, G.L.; Dickens, J.K.

1975-06-01

Differential cross sections for the production of low-energy gamma rays (less than 240 keV) by neutron interactions in fluorine have been measured for neutron energies between 0.1 and 20 MeV. The Oak Ridge Electron Linear Accelerator was used as the neutron source. Gamma rays were detected at 92 0 using an intrinsic germanium detector. Incident neutron energies were determined by time-of-flight techniques. Tables are presented for the production cross sections of three gamma rays having energies of 96, 110, and 197 keV. (14 figures, 3 tables) (U.S.)
Photoproduction of π+π-π0 on hydrogen with linearly polarized photons of energy 20-70 GeV

International Nuclear Information System (INIS)

Lasalle, J.C.; Patrick, G.N.; Storr, K.M.; Atkinson, M.; Axon, T.J.; Barberis, D.; Brodbeck, T.J.; Brookes, G.R.; Bunn, J.J.; Bussey, P.J.; Clegg, A.B.; Dainton, J.B.; Davenport, M.; Dickinson, B.; Dieckmann, B.; Donnachie, A.; Ellison, R.J.; Flower, P.; Flynn, P.J.; Galbraith, W.; Heinloth, K.; Henderson, R.C.W.; Hughes-Jones, R.E.; Hutton, J.S.; Ibbotson, M.; Jakob, H.P.; Jung, M.; Kemp, M.A.R.; Kumar, B.R.; Laberrigue, J.; Lafferty, G.D.; Lane, J.B.; Levy, J.M.; Liebenau, V.; McClatchey, R.H.; Mercer, D.; Morris, J.A.G.; Morris, J.V.; Newton, D.; Paterson, C.; Paul, E.; Raine, C.; Reidenbach, M.; Rotscheidt, H.; Schloesser, A.; Sharp, P.H.; Skillicorn, I.O.; Smith, K.M.; Thompson, R.J.; Vaissiere, C. de la; Waite, A.P.; Worsell, M.F.; Yiou, T.P.

1984-01-01

Results on photoproduction of π + π - π 0 in the photon energy range 20-70 GeV are presented. For the ω meson, the production cross-section is found to be 1010 +- 15 (statistical) +- 290 (systematic) nb and is constant over the incident photon energy range. Spin-density matrix elements are evaluated for ω meson production. The PHI meson is observed with a total photoproduction cross section (corrected for branching ratio to π + π - π 0 ) of 610 +- 35 +- 170 nb. A third resonance, at 1.67 GeV, is seen in the mass spectrum and its interpretation is discussed. The production of a braod π + π - π 0 continuum, mainly via rhoπ, and peaking at 1.2 GeV, contributes with a cross section of about 2.5 μb. The spin-parity content is analysed by the moments of the π + π - π 0 decay angular distribution in the helicity frame and by maximum likelihood fits to the π + π - π 0 Dalitz plot. It is found that production of Jsup(P) = 1 - states accounts for less than half of the total mass spectrum above 900 MeV. There is a broad enhancement in the 1 + wave around 1.15 GeV indicating photoproduction of the H(1190) meson. (orig.)
A 20MeV (p,d) study of nuclear structure in the even and odd tin isotopes

International Nuclear Information System (INIS)

Fleming, D.G.; Paris-11 Univ., 91 - Orsay

1978-01-01

The even and odd tin isotopes have been studied by 20 MeV (p,d) reactions. States strongly populated in the odd isotopes are due to the valence neutron shells and extend up to only 2 MeV of excitation energy; 'deep hole' states were not identified. The occupation probabilities extracted from finite-range distorted-wave-Born-approximation calculations generally agree well with the predictions of the BCS theory of superconducting nuclei, particularly with the calculations of Clement and Baranger. In the even tin isotopes, strongly populated states are characterized predominantly by L=2 transfers extending up to 4 MeV excitation energy. The experimental spectroscopic factors are compared with the BCS calculated values of Clement and Baranger, Alzetta and Sawicki, and Van Gunsteren; relatively good agreement is obtained for L=2 transitions, but not for L=0 transitions. A considerable fraction of the sum rule L=2 strength in 118 Sn is missing in the 119 Sn(p,d) 118 Sn experimental spectrum; in like manner, no 4 + strength could be identified in either 114 Sn or 118 Sn
Modeling of Electric Field Around 100 MVA 150/20 kV Power Transformator using Charge Simulation Method

Directory of Open Access Journals (Sweden)

Noviadi Arief Rachman

2013-07-01

Full Text Available Charge Simulation Method is one of the field theory that can be used as an approach to calculate the electromagnetic distribution on the electrical conductor. This paper discussed electric field modeling around power transformator by using Matlab to find the safety distance. The safe distance threshold of the electric field to human health refers to WHO and SNI was 5 kV/m. The specification of the power transformator was three phases, 150/20 kV, and 100 MVA. The basic concept is to change the distribution charge on the conductor or dielectric polarization charge with a set of discrete fictitious charge. The value of discrete fictitious charge was equivalent to the potential value of the conductor, and became a reference to calculate the electric field around the surface contour of the selected power transformator. The measurement distance was 5 meter on each side of the transformator surface. The results showed that the magnitude of the electric field at the front side was 5541 V/m, exceeding the safety limits.
rpe v5: an emulator for reduced floating-point precision in large numerical simulations

Science.gov (United States)

Dawson, Andrew; Düben, Peter D.

2017-06-01

This paper describes the rpe (reduced-precision emulator) library which has the capability to emulate the use of arbitrary reduced floating-point precision within large numerical models written in Fortran. The rpe software allows model developers to test how reduced floating-point precision affects the result of their simulations without having to make extensive code changes or port the model onto specialized hardware. The software can be used to identify parts of a program that are problematic for numerical precision and to guide changes to the program to allow a stronger reduction in precision.The development of rpe was motivated by the strong demand for more computing power. If numerical precision can be reduced for an application under consideration while still achieving results of acceptable quality, computational cost can be reduced, since a reduction in numerical precision may allow an increase in performance or a reduction in power consumption. For simulations with weather and climate models, savings due to a reduction in precision could be reinvested to allow model simulations at higher spatial resolution or complexity, or to increase the number of ensemble members to improve predictions. rpe was developed with a particular focus on the community of weather and climate modelling, but the software could be used with numerical simulations from other domains.
Numerical consistency check between two approaches to radiative ...

Indian Academy of Sciences (India)

approaches for a consistency check on numerical accuracy, and find out the stabil- ... ln(MR/1 GeV) to top-quark mass scale t0(= ln(mt/1 GeV)) where t0 ≤ t ≤ tR, we ..... It is in general to tone down the solar mixing angle through further fine.
Chromatic Aberration Correction for Atomic Resolution TEM Imaging from 20 to 80 kV.

Science.gov (United States)

Linck, Martin; Hartel, Peter; Uhlemann, Stephan; Kahl, Frank; Müller, Heiko; Zach, Joachim; Haider, Max; Niestadt, Marcel; Bischoff, Maarten; Biskupek, Johannes; Lee, Zhongbo; Lehnert, Tibor; Börrnert, Felix; Rose, Harald; Kaiser, Ute

2016-08-12

Atomic resolution in transmission electron microscopy of thin and light-atom materials requires a rigorous reduction of the beam energy to reduce knockon damage. However, at the same time, the chromatic aberration deteriorates the resolution of the TEM image dramatically. Within the framework of the SALVE project, we introduce a newly developed C_{c}/C_{s} corrector that is capable of correcting both the chromatic and the spherical aberration in the range of accelerating voltages from 20 to 80 kV. The corrector allows correcting axial aberrations up to fifth order as well as the dominating off-axial aberrations. Over the entire voltage range, optimum phase-contrast imaging conditions for weak signals from light atoms can be adjusted for an optical aperture of at least 55 mrad. The information transfer within this aperture is no longer limited by chromatic aberrations. We demonstrate the performance of the microscope using the examples of 30 kV phase-contrast TEM images of graphene and molybdenum disulfide, showing unprecedented contrast and resolution that matches image calculations.
Zdeněk Kopal: Numerical Analyst

Science.gov (United States)

Křížek, M.

2015-07-01

We give a brief overview of Zdeněk Kopal's life, his activities in the Czech Astronomical Society, his collaboration with Vladimír Vand, and his studies at Charles University, Cambridge, Harvard, and MIT. Then we survey Kopal's professional life. He published 26 monographs and 20 conference proceedings. We will concentrate on Kopal's extensive monograph Numerical Analysis (1955, 1961) that is widely accepted to be the first comprehensive textbook on numerical methods. It describes, for instance, methods for polynomial interpolation, numerical differentiation and integration, numerical solution of ordinary differential equations with initial or boundary conditions, and numerical solution of integral and integro-differential equations. Special emphasis will be laid on error analysis. Kopal himself applied numerical methods to celestial mechanics, in particular to the N-body problem. He also used Fourier analysis to investigate light curves of close binaries to discover their properties. This is, in fact, a problem from mathematical analysis.
Calculated neutron-induced cross sections for /sup 58,60/Ni from 1 to 20 MeV and comparisons with experiments

International Nuclear Information System (INIS)

Hetrick, D.M.; Fu, C.Y.; Larson, D.C.

1987-06-01

Nuclear model codes were used to compute cross sections for neutron-induced reactions on both 58 Ni and 60 Ni for incident energies from 1 to 20 MeV. The input parameters for the model codes were determined through analysis of experimental data in this energy region. Discussion of the models used, the input data, the resulting calculations, extensive comparisons to measured data, and comparisons to the Evaluated Nuclear Data File (ENDF/B-V) for Ni (MAT 1328) are included in this report. 118 refs., 101 figs., 19 tabs
Search for gamma ray emission above 20 MeV from the Crab nebula and the NP 0532 pulsar

International Nuclear Information System (INIS)

Leray, J.-P.

1976-08-01

The search for gamma-ray emission above 20 MeV from the Crab Nebula and Pulsar NP 0532 was undertaken. A critical analysis of the detector is presented together with a study of the background. The observed flux from the sources are compared with a theoretical model for the gamma-ray emission bases on the synchrotron process in the Crab Nebula and Pulsar NP 0532 [fr
Using Linear Equating to Map PROMIS(®) Global Health Items and the PROMIS-29 V2.0 Profile Measure to the Health Utilities Index Mark 3.

Science.gov (United States)

Hays, Ron D; Revicki, Dennis A; Feeny, David; Fayers, Peter; Spritzer, Karen L; Cella, David

2016-10-01

Preference-based health-related quality of life (HR-QOL) scores are useful as outcome measures in clinical studies, for monitoring the health of populations, and for estimating quality-adjusted life-years. This was a secondary analysis of data collected in an internet survey as part of the Patient-Reported Outcomes Measurement Information System (PROMIS(®)) project. To estimate Health Utilities Index Mark 3 (HUI-3) preference scores, we used the ten PROMIS(®) global health items, the PROMIS-29 V2.0 single pain intensity item and seven multi-item scales (physical functioning, fatigue, pain interference, depressive symptoms, anxiety, ability to participate in social roles and activities, sleep disturbance), and the PROMIS-29 V2.0 items. Linear regression analyses were used to identify significant predictors, followed by simple linear equating to avoid regression to the mean. The regression models explained 48 % (global health items), 61 % (PROMIS-29 V2.0 scales), and 64 % (PROMIS-29 V2.0 items) of the variance in the HUI-3 preference score. Linear equated scores were similar to observed scores, although differences tended to be larger for older study participants. HUI-3 preference scores can be estimated from the PROMIS(®) global health items or PROMIS-29 V2.0. The estimated HUI-3 scores from the PROMIS(®) health measures can be used for economic applications and as a measure of overall HR-QOL in research.
On numerical-analytic techniques for boundary value problems

Czech Academy of Sciences Publication Activity Database

Rontó, András; Rontó, M.; Shchobak, N.

2012-01-01

Roč. 12, č. 3 (2012), s. 5-10 ISSN 1335-8243 Institutional support: RVO:67985840 Keywords : numerical-analytic method * periodic successive approximations * Lyapunov-Schmidt method Subject RIV: BA - General Mathematics http://www.degruyter.com/view/j/aeei.2012.12.issue-3/v10198-012-0035-1/v10198-012-0035-1.xml?format=INT
SIVEH: Numerical Computing Simulation of Wireless Energy-Harvesting Sensor Nodes

Directory of Open Access Journals (Sweden)

Pedro Yuste

2013-09-01

Full Text Available The paper presents a numerical energy harvesting model for sensor nodes, SIVEH (Simulator I–V for EH, based on I–V hardware tracking. I–V tracking is demonstrated to be more accurate than traditional energy modeling techniques when some of the components present different power dissipation at either different operating voltages or drawn currents. SIVEH numerical computing allows fast simulation of long periods of time—days, weeks, months or years—using real solar radiation curves. Moreover, SIVEH modeling has been enhanced with sleep time rate dynamic adjustment, while seeking energy-neutral operation. This paper presents the model description, a functional verification and a critical comparison with the classic energy approach.
NOAA-CIRES 20th Century Reanalysis (V2c)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The 20th Century Reanalysis version 2c (20CRV2c)is an effort led by PSD and the CIRES at the University of Colorado to produce a reanalysis dataset spanning the...
Numerická simulace v biomechanice – forenzní příklad Numerical simulation in biomechanics – a forensic example

Directory of Open Access Journals (Sweden)

Norbert Praxl

2006-02-01

Full Text Available Příspěvek prezentuje vybraný příklad forenzní aplikace biomechanických metod zahrnujících numerickou simulaci s použitím modelů lidského těla. Postup biomechanické rekonstrukce je demonstrován na konkrétním případu smrtelného pádu z výšky. Základem biomechanické rekonstrukce jsou stopy na místě nálezu těla spolu se zraněními zjištěnými při provedné soudní pitvě. Konečným cílem biomechanické analýzy je jednoznačné a bezesporné přiřazení veškerých zjištěných stop a objasnění celé události z mechanického hlediska. Některá zranění zjištěná v tomto konkrétním případě byla pro pád z výšky typická, část nálezu ale nebylo možno prima vista zařadit. Policejní vyšetřování na místě nálezu také přineslo některá fakta, která nebylo možno uspokojivě vysvětlit. Numerická simulace s použitím modelů lidského těla přinesla údaje umožňující vysvětlení mnoha do té doby nejasných aspektů případu. Tato metoda poskytuje objektivní a kvantitativní informace umožnující daleko přesnější analýzu studovaného jevu nebo události – kinematické i dynamické parametry lidského těla a jeho interakce s okolními strukturami. Dokonce je možné zjišťovat i síly působící uvnitř organismu a díky tomu přesněji predikovat trauma. Všechny důležité neznámé parametry (počáteční podmínky numerické simulace, jako pozice těla a jeho jednotlivých segmentů, jeho orientace v prostoru, počáteční rychlost atp. lze parametrizovat a obsáhnout tak všechny možné konstelace. Další velmi důležitou předností této metody je propracovaná a efektivní vizualizace výsledků výpočtů, která usnadňujě pochopení studovaných událostí a jevů i bez důkladných biomechanických znalostí. Největší omezení použití modelů lidského těla představuje v současné době nemožnost simulovat aktivní pohyby; modely svých chov
Total cross sections for slow-electron (1--20 eV) scattering in solid H2O

International Nuclear Information System (INIS)

Michaud, M.; Sanche, L.

1987-01-01

An analytical method is proposed to determine absolute total cross sections per scatterer and related mean free paths for low-energy electron scattering in disordered molecular solid films. The procedure is based on a two-stream multiple-scattering model of the thickness dependence of the film reflectivity for elastic electrons. The expected analytical behavior and accuracy are tested on a model sample whose scattering properties are generated by a Monte Carlo simulation from initially known parameters. The effects of multiple scattering inside the film and at its interfaces are taken into account and discussed. The thickness dependence of the elastic electron reflectivity of H 2 O film condensed at 14 K is reported between 1 and 20 eV incident energy with a spectrometer resolution of 10 MeV. The proposed method is applied to extract from these measurements the energy dependence of the total effective and total inelastic cross sections for electron scattering in amorphous ice
Fluence-to-Absorbed Dose Conversion Coefficients for Use in Radiological Protection of Embryo and Foetus Against External Exposure to Muons from 20MeV to 50GeV

International Nuclear Information System (INIS)

Chen Jing

2008-01-01

This study used the Monte-Carlo code MCNPX to determine mean absorbed doses to the embryo and foetus when the mother is exposed to external muon fields. Monoenergetic muons ranging from 20 MeV to 50 GeV were considered. The irradiation geometries include anteroposterior (AP), postero-anterior (PA), lateral (LAT), rotational (ROT), isotropic (ISO), and top-down (TOP). At each of these irradiation geometries, absorbed doses to the foetal body were calculated for the embryo of 8 weeks and the foetus of 3, 6 or 9 months, respectively. Muon fluence-to-absorbed-dose conversion coefficients were derived for the four prenatal ages. Since such conversion coefficients are yet unknown, the results presented here fill a data gap
Application of ASTEC V2.0 to severe accident analyses for German KONVOI type reactors

International Nuclear Information System (INIS)

Nowack, H.; Erdmann, W.; Reinke, N.

2011-01-01

The integral code ASTEC is jointly developed by IRSN (Institut de Radioprotection et de Surete Nucleaire, France) and GRS (Germany). Its main objective is to simulate severe accident scenarios in PWRs from the initiating event up to the release of radioactive material into the environment. This paper describes the ASTEC modeling approach and the nodalisation of a KONVOI type PWR as an application example. Results from an integral severe accident study are presented and shortcomings as well as advantages are outlined. As a conclusion, the applicability of ASTEC V2.0 for deterministic severe accident analyses used for PSA level 2 and Severe Accident Management studies will be assessed. (author)

Põhja-Kaukaasias võtab vägivald jälle võimust / Jaanus Piirsalu

Index Scriptorium Estoniae

Piirsalu, Jaanus, 1973-

2009-01-01

Inguššias Nazranis hukkus terrorirünnakus vähemalt 20 inimest, vigastada sai 138 inimest. Tänavu on tulevahetustes hukkunud või tapetud üle 120 õiguskaitseorgani töötaja ja sõjaväelase, tapetud on vaimulikke ja ametnikke
Study on a metal pushing V-belt type CVT. Numerical analysis for belt tension distribution in brands of a ring at steady state; Kinzoku V belt wo mochiita CVT ni kansuru kenkyu. Sekiso belt (steel ring) no dendo kiko kaiseki

Energy Technology Data Exchange (ETDEWEB)

Fujii, T; Kuwabara, S [Doshisha University, Kyoto (Japan); Kanehara, S [Honda Motor Co. Ltd., Tokyo (Japan)

1997-10-01

The power transmitting mechanisms for laminated belts were studied to analyze belt tension in each band of the ring of metal V-belts. A numerical model consisting of linear springs and frictional elements was proposed. The present model was experimentally proved. It is revealed based on the numerical results that each band shares the ring tension equally when the coefficients of friction for bands and a pulley are the same while the first band must support more when the coefficients of friction between two bands are lower than that between a saddle surface of the block and the inner band. 4 refs., 9 figs.
Inverse Thermal Analysis of Ti-6Al-4V Friction Stir Welds Using Numerical-Analytical Basis Functions with Pseudo-Advection

Science.gov (United States)

Lambrakos, S. G.

2018-04-01

Inverse thermal analysis of Ti-6Al-4V friction stir welds is presented that demonstrates application of a methodology using numerical-analytical basis functions and temperature-field constraint conditions. This analysis provides parametric representation of friction-stir-weld temperature histories that can be adopted as input data to computational procedures for prediction of solid-state phase transformations and mechanical response. These parameterized temperature histories can be used for inverse thermal analysis of friction stir welds having process conditions similar those considered here. Case studies are presented for inverse thermal analysis of friction stir welds that use three-dimensional constraint conditions on calculated temperature fields, which are associated with experimentally measured transformation boundaries and weld-stir-zone cross sections.
Fluence measurements applied to 5-20 MeV/amu ion beam dosimetry by simultaneous use of a total-absorption calorimeter and a Faraday cup

CERN Document Server

Kojima, T; Takizawa, H; Tachibana, H; Tanaka, R

1998-01-01

A Faraday cup was fabricated for measuring the beam current of a few tens MeV/amu ion beams of the TIARA AVF cyclotron. It has been applied as a beam monitor for studying the characteristics of film dosimeters that are well-established for high doses of sup 6 sup 0 Co gamma-rays and 1 to 10 MeV electrons. A total absorption calorimeter designed to measure energy fluence has also been tested for estimating the uncertainty in fluence measurement of 5-20 MeV/amu ion beams, by simultaneous use of the calorimeter and the Faraday cup in a broad uniform fluence field. The estimated fluence was evaluated on the basis of nominal particle energy values derived from the cyclotron acceleration parameters. The average ratio of the measured fluence values to the estimated values is 1.024, and the average precision is within +-2% at a 68% confidence level, for most of the ion beams with a range of kinetic energy per nucleon, 5-20 MeV/amu, at an integrated charge above 5 nC/cm sup 2.
Level structure of /sup 13/C around Esub(x)=20 MeV studied by polarised neutron scattering from /sup 12/C

Energy Technology Data Exchange (ETDEWEB)

Tornow, W.; Woye, E.; Walter, R.L.

1987-02-01

Analysing-power data for elastic scattering of neutrons from /sup 12/C have been obtained at selected angles in small energy steps between incident energies of 15.55 and 17.35 MeV. The excitation energy, spin and parity of levels in /sup 13/C have been determined for excitation energies around 20 MeV via a phase-shift analysis of these data and of previously measured n-/sup 12/C total cross section data. In addition, an auxiliary phase-shift analysis has been performed in the neutron energy range from 12 to 15 MeV. All experimental data are well reproduced by the phase shifts obtained. The need for further experimental data is pointed out.
Study of the muon-pair production at centre-of-mass energies from 20 to 136 GeV with the ALEPH detector

CERN Document Server

Barate, R; Décamp, D; Ghez, P; Goy, C; Lees, J P; Lucotte, A; Minard, M N; Nief, J Y; Odier, P; Pietrzyk, B; Casado, M P; Chmeissani, M; Comas, P; Crespo, J M; Delfino, M C; Fernández, E; Fernández-Bosman, M; Garrido, L; Juste, A; Martínez, M; Orteu, S; Padilla, C; Park, I C; Pascual, A; Perlas, J A; Riu, I; Sánchez, F; Teubert, F; Colaleo, A; Creanza, D; De Palma, M; Gelao, G; Iaselli, Giuseppe; Maggi, G; Maggi, M; Marinelli, N; Nuzzo, S; Ranieri, A; Raso, G; Ruggieri, F; Selvaggi, G; Silvestris, L; Tempesta, P; Tricomi, A; Zito, G; Huang, X; Lin, J; Ouyang, Q; Wang, T; Xie, Y; Xu, R; Xue, S; Zhang, J; Zhang, L; Zhao, W; Abbaneo, D; Alemany, R; Bazarko, A O; Bright-Thomas, P G; Cattaneo, M; Cerutti, F; Drevermann, H; Forty, Roger W; Frank, M; Hagelberg, R; Harvey, J; Janot, P; Jost, B; Kneringer, E; Knobloch, J; Lehraus, Ivan; Lutters, G; Mato, P; Minten, Adolf G; Miquel, R; Mir, L M; Moneta, L; Oest, T; Pacheco, A; Pusztaszeri, J F; Ranjard, F; Rensing, P E; Rizzo, G; Rolandi, Luigi; Schlatter, W D; Schmelling, M; Schmitt, M; Schneider, O; Tejessy, W; Tomalin, I R; Venturi, A; Wachsmuth, H W; Wagner, A; Ajaltouni, Ziad J; Barrès, A; Boyer, C; Falvard, A; Ferdi, C; Gay, P; Guicheney, C; Henrard, P; Jousset, J; Michel, B; Monteil, S; Montret, J C; Pallin, D; Perret, P; Podlyski, F; Proriol, J; Rosnet, P; Rossignol, J M; Fearnley, Tom; Hansen, J B; Hansen, J D; Hansen, J R; Hansen, P H; Nilsson, B S; Rensch, B; Wäänänen, A; Daskalakis, G; Kyriakis, A; Markou, C; Simopoulou, Errietta; Vayaki, Anna; Zachariadou, K; Blondel, A; Brient, J C; Machefert, F P; Rougé, A; Rumpf, M; Valassi, Andrea; Videau, H L; Focardi, E; Parrini, G; Corden, M; Georgiopoulos, C H; Jaffe, D E; Antonelli, A; Bencivenni, G; Bologna, G; Bossi, F; Campana, P; Capon, G; Casper, David William; Chiarella, V; Felici, G; Laurelli, P; Mannocchi, G; Murtas, F; Murtas, G P; Passalacqua, L; Pepé-Altarelli, M; Curtis, L; Dorris, S J; Halley, A W; Knowles, I G; Lynch, J G; O'Shea, V; Raine, C; Scarr, J M; Smith, K; Teixeira-Dias, P; Thompson, A S; Thomson, E; Thomson, F; Turnbull, R M; Becker, U; Geweniger, C; Graefe, G; Hanke, P; Hansper, G; Hepp, V; Kluge, E E; Putzer, A; Schmidt, M; Sommer, J; Tittel, K; Werner, S; Wunsch, M; Beuselinck, R; Binnie, David M; Cameron, W; Dornan, Peter J; Girone, M; Goodsir, S M; Martin, E B; Morawitz, P; Moutoussi, A; Nash, J; Sedgbeer, J K; Stacey, A M; Williams, M D; Dissertori, G; Girtler, P; Kuhn, D; Rudolph, G; Betteridge, A P; Bowdery, C K; Colrain, P; Crawford, G; Finch, A J; Foster, F; Hughes, G; Jones, R W L; Sloan, Terence; Whelan, E P; Williams, M I; Hoffmann, C; Jakobs, K; Kleinknecht, K; Quast, G; Renk, B; Rohne, E; Sander, H G; Van Gemmeren, P; Zeitnitz, C; Aubert, Jean-Jacques; Benchouk, C; Bonissent, A; Bujosa, G; Calvet, D; Carr, J; Coyle, P; Diaconu, C A; Konstantinidis, N P; Leroy, O; Payre, P; Rousseau, D; Talby, M; Sadouki, A; Thulasidas, M; Tilquin, A; Trabelsi, K; Aleppo, M; Ragusa, F; Berlich, R; Blum, Walter; Büscher, V; Dietl, H; Dydak, Friedrich; Ganis, G; Gotzhein, C; Kroha, H; Lütjens, G; Lutz, Gerhard; Männer, W; Moser, H G; Richter, R H; Rosado-Schlosser, A; Schael, S; Settles, Ronald; Seywerd, H C J; Saint-Denis, R; Stenzel, H; Wiedenmann, W; Wolf, G; Boucrot, J; Callot, O; Chen, S; Cordier, A; Davier, M; Duflot, L; Grivaz, J F; Heusse, P; Höcker, A; Jacholkowska, A; Jacquet, M; Kim, D W; Le Diberder, F R; Lefrançois, J; Lutz, A M; Nikolic, I A; Park, H J; Schune, M H; Simion, S; Veillet, J J; Videau, I; Zerwas, D; Azzurri, P; Bagliesi, G; Batignani, G; Bettarini, S; Bozzi, C; Calderini, G; Carpinelli, M; Ciocci, M A; Ciulli, V; Dell'Orso, R; Fantechi, R; Ferrante, I; Giassi, A; Gregorio, A; Ligabue, F; Lusiani, A; Marrocchesi, P S; Messineo, A; Palla, Fabrizio; Sanguinetti, G; Sciabà, A; Spagnolo, P; Steinberger, Jack; Tenchini, Roberto; Tonelli, G; Vannini, C; Verdini, P G; Blair, G A; Bryant, L M; Chambers, J T; Gao, Y; Green, M G; Medcalf, T; Perrodo, P; Strong, J A; Von Wimmersperg-Töller, J H; Botterill, David R; Clifft, R W; Edgecock, T R; Haywood, S; Maley, P; Norton, P R; Thompson, J C; Wright, A E; Bloch-Devaux, B; Colas, P; Kozanecki, Witold; Lançon, E; Lemaire, M C; Locci, E; Pérez, P; Rander, J; Renardy, J F; Roussarie, A; Schuller, J P; Schwindling, J; Trabelsi, A; Vallage, B; Black, S N; Dann, J H; Kim, H Y; Litke, A M; McNeil, M A; Taylor, G; Booth, C N; Boswell, R; Brew, C A J; Cartwright, S L; Combley, F; Kelly, M S; Lehto, M H; Newton, W M; Reeve, J; Thompson, L F; Affholderbach, K; Böhrer, A; Brandt, S; Cowan, G D; Grupen, Claus; Saraiva, P; Smolik, L; Stephan, F; Apollonio, M; Bosisio, L; Della Marina, R; Giannini, G; Gobbo, B; Musolino, G; Pütz, J; Rothberg, J E; Wasserbaech, S R; Williams, R W; Armstrong, S R; Elmer, P; Feng, Z; Ferguson, D P S; Gao, Y S; González, S; Grahl, J; Greening, T C; Hayes, O J; Hu, H; McNamara, P A; Nachtman, J M; Orejudos, W; Pan, Y B; Saadi, Y; Scott, I J; Walsh, J; Wu Sau Lan; Wu, X; Yamartino, J M; Zheng, M; Zobernig, G

1997-01-01

The total cross section and the forward-backward asymmetry for the process $e^+ e^- \\rightarrow \\mu^+ \\mu^- (n \\gamma)$ are measured in the energy range 20-136 GeV by reconstructing the effective centre-of-mass energy after initial state radiation. The analysis is based on the data recorded with the ALEPH detector at LEP between 1990 and 1995, corresponding to a total integrated luminosity of 143.5 $\\mathrm{pb}^{-1}$. Two different approaches are used: in the first one an exclusive selection of events with hard initial state radiation in the energy range 20-88 GeV is directly compared with the Standard Model predictions showing good agreement. In the second one, all events are used to obtain a precise measurement of the energy dependence of $\\sigma^0$ and $A_{\\mathrm{FB}}^0$ from a model independent fit, enabling constraints to be placed on models with extra Z bosons.
Calculated neutron-induced cross sections for /sup 63/ /sup 65/Cu from 1 to 20 MeV and comparisons with experiments

Energy Technology Data Exchange (ETDEWEB)

Hetrick, D.M.; Fu, C.Y.; Larson, D.C.

1984-08-01

Nuclear model codes were used to compute cross sections for neutron-induced reactions on both /sup 63/Cu and /sup 65/Cu for incident energies from 1 to 20 MeV. The input parameters for the model codes were determined through analysis of experimental data in this energy region. Discussion of the models used, the input data, the resulting calculations, extensive comparisons to measured data, and comparisons to the Evaluated Nuclear Data File (ENDF/B-V) for Cu (MAT 1329) are included in this report.
On "new travelling wave solutions" of the KdV and the KdV-Burgers equations

NARCIS (Netherlands)

Kudryashov, Nikolai A.

The Korteweg-de Vries and the Korteweg-de Vries-Burgers equations are considered. Using the travelling wave the general solutions of these equations are presented. "New travelling wave solutions" of the KdV and the KdV-Burgers equations by Wazzan [Wazzan L Commun Nonlinear Sci Numer Simulat
Simple numerical chromosome aberrations in two pituitary adenomas

DEFF Research Database (Denmark)

Dietrich, C U; Pandis, N; Bjerre, P

1993-01-01

Cytogenetic analysis of short-term cultures of one non-secreting and one prolactin-producing pituitary adenoma revealed simple clonal numerical abnormalities in both tumors. The karyotype of the non-secreting adenoma was 48,XX, +4, +9[42]/49,XX, +4, +9, +20[2]/46,XX[6]. In the prolactin-secreting......Cytogenetic analysis of short-term cultures of one non-secreting and one prolactin-producing pituitary adenoma revealed simple clonal numerical abnormalities in both tumors. The karyotype of the non-secreting adenoma was 48,XX, +4, +9[42]/49,XX, +4, +9, +20[2]/46,XX[6]. In the prolactin...
Separation of gamma and hadron initiated air showers with energies between 20 and 500 TeV

Energy Technology Data Exchange (ETDEWEB)

Arqueros, F. [Universidad Complutense de Madrid (Spain). Facultad de Ciencias Fisicas; Karle, A. [Max-Planck-Institut fuer Physik, Muenchen (Germany); Lorenz, E. [Max-Planck-Institut fuer Physik, Muenchen (Germany); Martinez, S. [Universidad Complutense de Madrid (Spain). Facultad de Ciencias Fisicas; Plaga, R. [Max-Planck-Institut fuer Physik, Muenchen (Germany); Rozanska, M. [Institute of Nuclear Physics, Cracow (Poland)

1994-04-24

The discrimination between air showers initiated by {gamma} rays and by hadrons is one of the fundamental problems in experimental cosmic-ray physics. The physics of this `{gamma}/hadron separation` is discussed in this paper. We restrict ourselves to the energy range from about 20 to 500 TeV, and take only the information contained in the lateral Cerenkov light distribution and the number of electrons at the detector level into consideration. An understanding of the differences between air showers generated by {gamma} rays and those due to hadrons leads us to formulate suitable observables for the separation process. Angle integrating Cerenkov arrays (AICA) offer a promising new approach to ground-based {gamma}-ray astronomy in the energy region from about 20 to 500 TeV. In order to establish this technique, an efficient suppression of the overwhelming hadronic background radiation is required. As an example for our general discussion, we present one method for {gamma}/hadron separation in AICAs called ``LES``. It is based on the simultaneous determination of the shower size and some characteristic parameters of the lateral distribution of the Cerenkov light. The potential inherent within this technique is demonstrated in quantitative detail for the existing ``AIROBICC`` AICA. We also propose an objective measure of the intrinsic sensitivity of a detection scheme in ground-based {gamma}-ray astronomy, the ``reduced quality factor``. It is shown that AICAs may reach a sensitivity to {gamma}-ray point sources in the high VHE range similar to that of the Cerenkov-telescope imaging technique in the low VHE region. (orig.)
Separation of gamma and hadron initiated air showers with energies between 20 and 500 TeV

International Nuclear Information System (INIS)

Arqueros, F.; Lorenz, E.; Martinez, S.; Rozanska, M.

1995-01-01

The discrimination between air showers initiated by γ rays and by hadrons is one of the fundamental problems in experimental cosmic-ray physics. The physics of this 'γ/hadron separation' is discussed in this paper. We restrict ourselves to the energy range from about 20 to 500 TeV, and take only the information contained in the lateral Cerenkov light distribution and the number of electrons at the detector level into consideration. An understanding of the differences between air showers generated by γ rays and those due to hadrons leads us to formulate suitable observables for the separation process. Angle integrating Cerenkov arrays (AICA) offer a promising new approach to ground-based γ-ray astronomy in the energy region from about 20 to 500 TeV. In order to establish this technique, an efficient suppression of the overwhelming hadronic background radiation is required. As an example for our general discussion, we present one method for γ/hadron separation in AICAs called ''LES''. It is based on the simultaneous determination of the shower size and some characteristic parameters of the lateral distribution of the Cerenkov light. The potential inherent within this technique is demonstrated in quantitative detail for the existing ''AIROBICC'' AICA. We also propose an objective measure of the intrinsic sensitivity of a detection scheme in ground-based γ-ray astronomy, the ''reduced quality factor''. It is shown that AICAs may reach a sensitivity to γ-ray point sources in the high VHE range similar to that of the Cerenkov-telescope imaging technique in the low VHE region. (orig.)
Total cross sections for nu$_{mu}$ and n$\\overline{u}_{mu}$ charged-current interactions between 20 and 200 GeV

CERN Document Server

Bosetti, Peter C; Fritze, P; Grässler, Herbert; Hasert, F J; Schulte, R; Böckmann, Klaus; Kokott, T P; Nellen, B; Wünsch, B; Cundy, Donald C; Grant, A; Hulth, P O; Klein, H; Morrison, Douglas Robert Ogston; Pagiola, E; Pape, L; Peyrou, Charles; Scott, W G; Wachsmuth, H W; Simopoulou, Errietta; Vayaki, Anna; Barnham, Keith W J; Butterworth, Ian; Iaselli, Giuseppe; Miller, D B; Mobayyen, M; Penfold, C; Petrides, A; Powell, K J; Albajar, C; Perkins, Donald Hill; Radojicic, D; Saitta, B; Bolognese, T; Tallini, Bruno; Velasco, J; Vignaud, D

1982-01-01

Exposures of the Ne/H/sub 2/ filled Big European Bubble Chamber (BEBC) to a dichromatic neutrino (antineutrino) beam produced by 400 GeV protons of the CERN SPS yielded approximately 3100 events with a negative, and approximately 1100 with a positive, muon. The neutrino flux is determined from the muon flux in the shielding. Assuming a linear energy dependence of the cross section, the values sigma /E between 20 and 200 GeV are found to be 0.657+or-0.012 (stat.)+or-0.027 (syst.) and 0.309+or-0.009 (stat.)+or-0.013 (syst.) cm/sup 2/ (GeV nucleon)/sup -1/, for neutrinos and antineutrinos, respectively. The scaling variable q/sup 2//E decreases significantly with increasing energy both for neutrinos and antineutrinos.
The rho'(1600) in the reaction γp->π+π-π0π0p at photon energies of 20-70 GeV

International Nuclear Information System (INIS)

Atkinson, M.; Davenport, M.; Flower, P.; Hutton, J.S.; Kumar, B.R.; Morris, J.A.G.; Morris, J.V.; Sharp, P.H.; Bussey, P.J.; Dainton, J.B.; Paterson, C.; Raine, C.; Skillicorn, I.O.; Smith, K.M.; Brodbeck, T.J.; Clegg, A.B.; Flynn, P.J.; Henderson, R.C.W.; Newton, D.; Axon, T.J.; Barberis, D.; Dickinson, B.; Donnachie, A.; Ellison, R.J.; Hughes-Jones, R.E.; Ibbotson, M.; Lafferty, G.D.; Lane, J.B.; Mercer, D.; Thompson, R.J.; Waite, A.P.; Worsell, M.F.; Laberrigue, J.; Levy, J.M.; Vaissiere, C. de la; Yiou, T.P.; Brookes, G.R.; Bunn, J.J.; Galbraith, W.; McClatchey, R.

1985-01-01

The reaction γp->π + π - π 0 π 0 p (excluding ωπ 0 production) has been studied for photon energies in the range 20-70 GeV. A peak is seen in the 4π mass spectrum at proportional1.66 GeV with a width of proportional0.3 GeV which is identified with the rho'(1600). Maximum likelihood fits show that the peak is dominantly in rhosup(+-)πsup(-+)π 0 with B(rho'->rho 0 π 0 π 0 )/(Brho'->rhosup(+-)πsup(-+)π 0 ) 1 or π'. (orig.)
Effect of 520 MeV Kr{sup 20+} ion irradiation on the critical current density of Bi-2212 single crystals

Energy Technology Data Exchange (ETDEWEB)

Terai, Takayuki; Ito, Yasuyuki [Tokyo Univ. (Japan). Faculty of Engineering; Kishio, Kouji

1996-10-01

Change in magnetic properties of Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+y} (Bi-2212) single crystals due to Kr{sup 20+} ion irradiation is reported, focused on critical current density and irreversibility magnetic field. The Bi-2212 single crystal specimens (3x3x0.3 mm{sup 3}) were prepared by the floating zone method. Each specimen was irradiated with 520 MeV Kr{sup 20+} ions of 10{sup 10}-10{sup 11} cm{sup -2} in the fluence. Magnetic hysteresis was measured at 4.2K-60K with a vibrating sample magnetometer before and after irradiation. Very large enhancement was observed in critical current density and irreversibility magnetic field above 20K. (author)
Investigation of V and V process for thermal fatigue issue in a sodium cooled fast reactor – Application of uncertainty quantification scheme in verification and validation with fluid-structure thermal interaction problem in T-junction piping system

Energy Technology Data Exchange (ETDEWEB)

Tanaka, Masaaki, E-mail: tanaka.masaaki@jaea.go.jp

2014-11-15

Highlights: • Outline of numerical simulation code MUGTHES for fluid-structure thermal interaction was described. • The grid convergence index (GCI) method was applied according to the ASME V and V-20 guide. • Uncertainty of MUGTHES can be successfully quantified for thermal-hydraulic problems and unsteady heat conduction problems in the structure. • Validation for fluid-structure thermal interaction problem in a T-junction piping system was well conducted. - Abstract: Thermal fatigue caused by thermal mixing phenomena is one of the most important issues in design and safety assessment of fast breeder reactors. A numerical simulation code MUGTHES consisting of two calculation modules for unsteady thermal-hydraulics analysis and unsteady heat conduction analysis in structure has been developed to predict thermal mixing phenomena and to estimate thermal response of structure under the thermal interaction between fluid and structure fields. Although verification and validation (V and V) of MUGTHES has been required, actual procedure for uncertainty quantification is not fixed yet. In order to specify an actual procedure of V and V, uncertainty quantifications with the grid convergence index (GCI) estimation according to the existing guidelines were conducted in fundamental laminar flow problems for the thermal-hydraulics analysis module, and also uncertainty for the structure heat conduction analysis module and conjugate heat transfer model was quantified in comparison with the theoretical solutions of unsteady heat conduction problems. After the verification, MUGTHES was validated for a practical fluid-structure thermal interaction problem in T-junction piping system compared with measured results of velocity and temperatures of fluid and structure. Through the numerical simulations in the verification and validation, uncertainty of the code was successfully estimated and applicability of the code to the thermal fatigue issue was confirmed.
Design and rf tuning of the KEK 40 MeV proton linear accelerator

International Nuclear Information System (INIS)

Kato, Takao.

1986-09-01

An Alvarez linac was designed and constructed on the basis of a model linac study to increase the output energy from 20 to 40 MeV. The linac was tuned by frequency tuners and post couplers. Stabilization of the field was achieved and a variation within ± 0.7 % of the accelerating field was obtained. An equivalent circuit analysis which can numerically solve loop equations, including stem and post currents in addition to tank current, can explain the rf characteristics of a postcoupled structure. (author)
Measurement of neutron activation cross-sections for elements Co, Ni, Y, Nb, Tm and Au between 12 and 20 MeV

International Nuclear Information System (INIS)

Iwasaki, S.; Matsuyama, S.; Ohkubo, T.; Fukuda, H.; Sakuma, M.; Kitamura, M.; Odano, N.

1995-01-01

Neutron activation cross-sections for cobalt, nickel, yttrium, niobium, thulium and gold have been measured in the neutron energies from 12 to 20 MeV with the reference cross section of NEA 93 Nb(n,2n) 92m Nb at Tohoku Dynamitron Facility. (author)
Database-independent, database-dependent, and extended interpretation of peptide mass spectra in VEMS V2.0

DEFF Research Database (Denmark)

Matthiesen, Rune; Bunkenborg, Jakob; Stensballe, Allan

2004-01-01

, and generation of protein and peptide databases. VEMS V2.0 has been developed into a fast tool for combining database-independent and -dependent protein assignments in an extended analysis of MS/MS-peptide data. MS or MS/MS data can be directly recalibrated after the first search by fitting the data to the best...... search result using polynomial equations. The score function is an improvement of known scoring algorithms and can be adapted for any MS instrument type. In addition, VEMS offers a novel statistical model for evaluating the significance of the protein assignment. The novel features are illustrated...
Numerical solution of ordinary differential equations

CERN Document Server

Fox, L

1987-01-01

Nearly 20 years ago we produced a treatise (of about the same length as this book) entitled Computing methods for scientists and engineers. It was stated that most computation is performed by workers whose mathematical training stopped somewhere short of the 'professional' level, and that some books are therefore needed which use quite simple mathematics but which nevertheless communicate the essence of the 'numerical sense' which is exhibited by the real computing experts and which is surely needed, at least to some extent, by all who use modern computers and modern numerical software. In that book we treated, at no great length, a variety of computational problems in which the material on ordinary differential equations occupied about 50 pages. At that time it was quite common to find books on numerical analysis, with a little on each topic ofthat field, whereas today we are more likely to see similarly-sized books on each major topic: for example on numerical linear algebra, numerical approximation, numeri...
Effect of spectral shape in the relative efficiency of LiF: Mg,Ti exposed to 20 keV effective energy X-rays

Energy Technology Data Exchange (ETDEWEB)

Ixquiac-Cabrera, J.M., E-mail: mixquiac@nucleares.unam.m [Instituto de Ciencias Nucleares, Universidad Nacional Autonoma de Mexico, A.P. 70-543, 04510 DF (Mexico); Departamento de Fisica, Universidad de San Carlos de Guatemala, Edificio T-1 Facultad de Ingenieria (Guatemala); Brandan, M.E.; Martinez-Davalos, A.; Rodriguez-Villafuerte, M.; Ruiz-Trejo, C. [Instituto de Fisica, Universidad Nacional Autonoma de Mexico, A.P. 20-364, 01000 DF (Mexico); Gamboa-deBuen, I. [Instituto de Ciencias Nucleares, Universidad Nacional Autonoma de Mexico, A.P. 70-543, 04510 DF (Mexico)

2011-04-15

This work is aimed at studying the possible dependence of the thermoluminescent response of LiF:Mg,Ti (TLD-100) on the X-ray beam spectrum. TLD-100 chips were irradiated with 20 keV effective energy filtered tungsten X-ray spectra, generated by a tube operated at 30, 40, 50, 60, 70 and 80 kV, and the response was measured relative to the response to {sup 60}Co gammas. TLDs were exposed in air at air kerma values between 50 and 300 mGy. Glow curve deconvolution into 8 peaks (3, 4, 5, 6a, 6b, 7, 8 and 9) was performed in order to evaluate the response of individual peaks and regions of interest in the glow curve. Results show that all peaks display a linear response, at least up to 200 mGy, for all X-ray beam qualities. The relative response of the total glow curve area, the dosimetric region (peaks 3 + 4 + 5) and peaks 5 to 9 is statistically constant for beams generated by voltages from 30 to 70 kV; for 80 kV, the values are lower by about 20% for peaks 8 and 9 and 9% for the rest. The relative efficiency for the glow curve area, the dosimetric region and peaks 5 (1.15, 1.10 and 1.13), peaks 8 and 9 (2.05 and 1.55) do not depend on the beam spectrum between 30 and 70 kV, while for 80 kV the efficiency is lower. For peaks 6a, 6b and 7, relative efficiencies (1.91, 2.94 and 2.60) are voltage independent.

Numerical simulation of fluid flow in microporous media

International Nuclear Information System (INIS)

Xu Ruina; Jiang Peixue

2008-01-01

The flow characteristics of water and air in microporous media with average diameters of 200 μm, 125 μm, 90 μm, 40 μm, 20 μm, and 10 μm were studied numerically. The calculated friction factors for water and air in the non-slip-flow regime in the microporous media agree well with the known correlation suitable for normal size porous media. The numerically predicted friction factors for air in the slip-flow regime in the microporous media with 90 μm, 40 μm, 20 μm, and 10 μm diameter particles were less than the correlation for normal size porous media but close to experimental data and a modified correlation that accounts for rarefaction. Comparisons of the numerical results with the experimental data and the modified correlations show that rarefaction effects occur in air flows in the microporous media with particle diameters less than 90 μm and that the numerical calculations with velocity slip on the boundary can properly simulate the fluid flow in microporous media
INTERBALL-Auroral observations of 0.1-12 keV ion gaps in the diffuse auroral zone

Directory of Open Access Journals (Sweden)

R. A. Kovrazhkin

1999-06-01

Full Text Available We examine ion flux dropouts detected by INTERBALL-Auroral upon traversal of the auroral zone at altitudes of \\sim13 000 up to 20 000 km. These dropouts which we refer to as "gaps", are frequently observed irrespectively of longitudinal sector and appear characteristic of INTERBALL-Auroral ion spectrograms. Whereas some of these gaps display a nearly monoenergetic character (~12 keV, others occur at energies of a few hundreds of eV up to several keV. INTERBALL-Auroral data exhibit the former monoenergetic gap variety essentially in the evening sector. As examined in previous studies, these gaps appear related to transition from particle orbits that are connected with the magnetotail plasma source to closed orbits encircling the Earth. The latter gap variety, which spreads over several hundreds of eV to a few keV is often observed in the dayside magnetosphere. It is argued that such gaps are due to magnetospheric residence times well above the ion lifetime. This interpretation is supported by numerical orbit calculations which reveal extremely large (up to several tens of hours times of flight in a limited energy range as a result of conflicting E × B and gradient-curvature drifts. The characteristic energies obtained numerically depend upon both longitude and latitude and are quite consistent with those measured in-situ.Key words. Magnetospheric physics (auroral phenomena; plasma convection
Astrophysical s-factor measurements for {sup 1}20Te(p,{gamma}){sup 1}21I and {sup 1}20Te(p,n){sup 1}20I reactions; {sup 1}20Te(p,{gamma}){sup 1}21I ve {sup 1}20Te(p,n){sup 1}20I reaksiyonlarinin astrofiziksel s-factor oelcuemleri

Energy Technology Data Exchange (ETDEWEB)

Gueray, R T; Oezkan, N; Yalcin, C [Kocaeli University, Kocaeli (Turkey); Goerres, J; DeBoer, R; Palumbo, A; Tan, W P; Wiescher, M [University of Notre Dame, (United States); Fueloep, Zs; Somorjai, E [Institute of Nuclear Research ATOMKI (Hungary); Lee, H Y [Argonne National Laboratory (United States)

2009-07-01

Astrophysical S-factors for the {sup 1}20Te(p,{gamma}){sup 1}21I and {sup 1}20Te(p,n){sup 1}20I reactions have been measured in the effective center-of-mass energies between 2.47 MeV and 7.93 MeV. Experimental data have been compared with the Hauser-Fesbach statistical model calculations obtained with the model codes NON-SMOKER and TALYS. The discrepancies between the experimental results and calculations can mainly be attributed to the optical model potentials used in the codes.
Calculation of Multisphere Neutron Spectrometer Response Functions in Energy Range up to 20 MeV

CERN Document Server

Martinkovic, J

2005-01-01

Multisphere neutron spectrometer is a basic instrument of neutron measurements in the scattered radiation field at charged-particles accelerators for radiation protection and dosimetry purposes. The precise calculation of the spectrometer response functions is a necessary condition of the propriety of neutron spectra unfolding. The results of the response functions calculation for the JINR spectrometer with LiI(Eu) detector (a set of 6 homogeneous and 1 heterogeneous moderators, "bare" detector within cadmium cover and without it) at two geometries of the spectrometer irradiation - in uniform monodirectional and uniform isotropic neutron fields - are given. The calculation was carried out by the code MCNP in the neutron energy range 10$^{-8}$-20 MeV.
Excitation of giant resonances in 20Ne + 90Zr and 208Pb inelastic scattering at 40 MeV/u1

International Nuclear Information System (INIS)

Suomijaervi, T.; Beaumel, D.; Blumenfeld, Y.; Chomaz, P.; Frascaria, N.; Garron, J.P.; Jacmart, J.C.; Roynette, J.C.; Kraus, L.; Link, I.

1988-01-01

The giant resonance region in the inelastic spectra from the reactions 20 Ne + 90 Zr and 20 Ne + 208 Pb at 40 MeV/nucleon has been studied with a good energy and angular resolutions. The strength distributions of the different multipolarities contributing to the cross section were obtained by a resonance shape independent analysis. In the case of 208 Pb the GDR strength was found to be strongly shifted towards lower excitation energies which can be explained by the exponentially decreasing Coulomb excitation probability. Furthermore, indications for a high multipolarity component in the resonance structure were found in both reactions
Recommended ALIs and DACs for 10 CFR part 220: A consistent numerical set

Energy Technology Data Exchange (ETDEWEB)

Eckerman, K.F.

1996-05-01

Appendix B to 10 CFR Part 20 contains numerical data for controlling the intake of radionuclides in the workplace or in the environment. These data, derived from the recommendations of the International Commission on Radiological Protection (ICRP), do not provide a numerically consistent basis for demonstrating compliance with the limitation on dose stated in the regulation. This situation is largely a consequence of the numerical procedures used by the ICRP which did not maintain, in a strict numerical sense, the hierarchial relationship among the radiation protection quantities. In this work recommended values of the quantities in Appendix B to CFR Part 20 are developed using the dose coefficients of the applicable ICRP publications and a numerical procedure which ensures that the tabulated quantities are numerically consistent.
/sup 1/H(t,n)/sup 3/He reaction as monoenergetic neutron source in the (10/20) MeV energy interval

Energy Technology Data Exchange (ETDEWEB)

Zago, G. (Padua Univ. (Italy). Ist. di Fisica)

1981-11-14

The /sup 1/H(t,n)/sup 3/He reaction, considered as a neutron source in the (10/20) MeV energy interval, is a ''white'' neutron source having intensity, mean energy, and directionality which may prove advantageous in technological and biomedical researches.
V Deepak

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education. V Deepak. Articles written in Resonance – Journal of Science Education. Volume 20 Issue 1 January 2015 pp 47-54 Feature Article. Nature Watch: A Tale of Two Turtles · V Deepak · More Details Fulltext PDF ...
Producing explicit UPSILON flavor in e/sup +/e/sup -/ annihilation at DORIS energies. [neutral currents, cross section, signature, 15 to 20 MeV

Energy Technology Data Exchange (ETDEWEB)

Genz, H [Karlsruhe Univ. (TH) (Germany, F.R.). Inst. fuer Theoretische Kernphysik; Gorn, M [Karlsruhe Univ. (TH) (Germany, F.R.)

1978-07-31

If the neutral currents changing the flavor implicit in the UPSILON(9.5) are not suppressed, vector mesons with explicit UPSILON flavor should be produced in e/sup +/e/sup -/ annihilation at up to two e/sup +/e/sup -/ energies between ..sqrt..s approximately 5 - 6.5 GeV with a cross section sigma (peak, averaged over 7 MeV beam resolution) approximately 0.25% of sigma(e/sup +/e/sup -/..--> mu../sup +/..mu../sup -/). The signature would be monochromatic ..gamma.. lines with Esub(..gamma..)approximately 50-150 MeV, probably together with K production. Explicit flavor of a (anti QQ)sub(V) at 30 GeV would be produced at ..sqrt..s approximately 15-16 and ..sqrt..s approximately 20 GeV with sigmasup(averaged)sub(peak) approximately 3% and 5% of sigmasub(..mu../sup +/..mu../sup -/) with GAMMAsub(beam) = 27 and 48 MeV, respectively. The signature would be the same as above.
Experimental and numerical investigations of stable crack growth of axial surface flaws in a pressure vessel

International Nuclear Information System (INIS)

Brocks, W.; Krafka, H.; Mueller, W.; Wobst, K.

1988-01-01

In connection with the problem of the transferability of parameters obtained experimentally with the help of fracture-mechanical test specimens and used for the initiation and the stable propagation of cracks in cases of pulsating stress and of the elasto-plastic behaviour of construction components, a pressure vessel with an inside diameter of 1500 mm, a cylindrical length of 3000 mm and a wall thickness of 40 mm was hydraulically loaded with the help of internal pressure in the first stage, to attain an average crack growth of 1 mm at Δ a ≅, the loading taking place at about 21deg C. This stress-free annealed vessel exhibited an axial semielliptical vibration-induced surface crack about 181 mm long and 20 mm deep, as a test defect, in a welded circular blank made of the steel 20MnMoNi 55. The fractographic analysis of the first stable crack revealed that its growth rate of Δa was highest in the area of transition from the weak to the strong bend of the crack front (55deg m /σ v (average principal stress: σ m , Mises' reference stress: σ v v). A comparison of the experimental with the numerical results from the first stable crack shows that the local stable crack growth Δa cannot be calculated solely with reference to J, because Δa appears to depend essentially on the quotient σ m /σ v . (orig./MM) [de
Search for high-mass dilepton resonances in 20/fb of pp collisions at sqrt(s) = 8 TeV with the ATLAS experiment

CERN Document Server

Coggeshall, J; The ATLAS collaboration

2013-01-01

The ATLAS detector is used to search for heavy neutral gauge bosons (Z′) decaying to an electron-positron pair or a muon-antimuon pair. Results are presented based on the analysis of pp collisions at a center-of-mass energy of 8 TeV corresponding to an integrated luminosity of approximately 20 fb−1. A Z′ with Standard Model Z couplings to fermions is excluded at 95\\% C.L. for masses below 2.79 TeV in the electron channel, 2.48 TeV in the muon channel, and 2.86 TeV in the two channels combined. Limits on other model interpretations are also presented, including a Grand Unification model based on the E6 gauge group, a Randall-Sundrum graviton and a technicolor model with a composite Higgs boson.
Measurement of hadronic exclusive cross sections in e+e- annihilation from 1.42 to 2.20 GeV

International Nuclear Information System (INIS)

Bacci, C.; De Zorzi, G.; Penso, G.; Stella, B.; Baldini Celio, R.; Battistoni, G.; Capon, G.; Del Fabbro, R.; Iarocci, E.; Murtas, G.P.

1981-01-01

Total cross sections for reactions e + e - → π + π - π 0 , π + π - 2π 0 , 2π + 2π - π 0 , 2π + 2π - 2π 0 , 3π + 3π - have been measured in the total c.m. energy range 1.42-2.20 GeV. Partial R = sigmasub(had)/sigmasub(μ + μ - ) values for two and four produced charged pions, and cross sections for positive and negative G-parity states are also reported. (orig.)
The method to set up file-6 in neutron data library of light nuclei below 20 MeV

International Nuclear Information System (INIS)

Zhang Jingshang; Han Yinlu

2001-01-01

So far there is no file-6 (double differential cross section data, DDX) of the light nuclei in the main evaluated neutron nuclear data libraries in the world. Therefore, locating a proper description on the double differential cross section of all kinds of outgoing particles from neutron induced light nucleus reaction below 20 MeV is necessary. The motivation for this work is to introduce a way to set up file-6 in the neutron data library
Resonance parameters of the 6.67-, 20.9-, and 36.8-eV levels in 238U

International Nuclear Information System (INIS)

Olsen, D.K.; de Saussure, G.; Perez, R.B.; Difilippo, F.C.

1976-01-01

The ENDF/B-IV 238 U cross sections (MAT-1262) yield an effective capture resonance integral in strongly self-shielded situations which is too high. This situation suggests that the ENDF/B capture widths for the first few s-wave levels may be too large. Recent ORELA measurements of transmission through 238 U have been analyzed with a multilevel formula to determine the parameters of the 6.67-, 20.9-, and 36.6-eV levels. These three levels provide 86 percent of the infinitely dilute capture resonance integral
Extended VHE γ-ray emission towards SGR1806-20, LBV 1806-20, and stellar cluster Cl* 1806-20

Science.gov (United States)

H.E.S.S. Collaboration; Abdalla, H.; Abramowski, A.; Aharonian, F.; Ait Benkhali, F.; Akhperjanian, A. G.; Angüner, E. O.; Arrieta, M.; Aubert, P.; Backes, M.; Balzer, A.; Barnard, M.; Becherini, Y.; Becker Tjus, J.; Berge, D.; Bernhard, S.; Bernlöhr, K.; Birsin, E.; Blackwell, R.; Böttcher, M.; Boisson, C.; Bolmont, J.; Bordas, P.; Bregeon, J.; Brun, F.; Brun, P.; Bryan, M.; Bulik, T.; Capasso, M.; Carr, J.; Casanova, S.; Chakraborty, N.; Chalme-Calvet, R.; Chaves, R. C. G.; Chen, A.; Chevalier, J.; Chrétien, M.; Colafrancesco, S.; Cologna, G.; Condon, B.; Conrad, J.; Couturier, C.; Cui, Y.; Davids, I. D.; Degrange, B.; Deil, C.; deWilt, P.; Djannati-Ataï, A.; Domainko, W.; Donath, A.; Drury, L. O.'C.; Dubus, G.; Dutson, K.; Dyks, J.; Dyrda, M.; Edwards, T.; Egberts, K.; Eger, P.; Ernenwein, J.-P.; Eschbach, S.; Farnier, C.; Fegan, S.; Fernandes, M. V.; Fiasson, A.; Fontaine, G.; Förster, A.; Funk, S.; Füßling, M.; Gabici, S.; Gajdus, M.; Gallant, Y. A.; Garrigoux, T.; Giavitto, G.; Giebels, B.; Glicenstein, J. F.; Gottschall, D.; Goyal, A.; Grondin, M.-H.; Grudzińska, M.; Hadasch, D.; Hahn, J.; Hawkes, J.; Heinzelmann, G.; Henri, G.; Hermann, G.; Hervet, O.; Hillert, A.; Hinton, J. A.; Hofmann, W.; Hoischen, C.; Holler, M.; Horns, D.; Ivascenko, A.; Jacholkowska, A.; Jamrozy, M.; Janiak, M.; Jankowsky, D.; Jankowsky, F.; Jingo, M.; Jogler, T.; Jouvin, L.; Jung-Richardt, I.; Kastendieck, M. A.; Katarzyński, K.; Katz, U.; Kerszberg, D.; Khélifi, B.; Kieffer, M.; King, J.; Klepser, S.; Klochkov, D.; Kluźniak, W.; Kolitzus, D.; Komin, Nu.; Kosack, K.; Krakau, S.; Kraus, M.; Krayzel, F.; Krüger, P. P.; Laffon, H.; Lamanna, G.; Lau, J.; Lees, J.-P.; Lefaucheur, J.; Lefranc, V.; Lemière, A.; Lemoine-Goumard, M.; Lenain, J.-P.; Leser, E.; Lohse, T.; Lorentz, M.; Liu, R.; Lypova, I.; Marandon, V.; Marcowith, A.; Mariaud, C.; Marx, R.; Maurin, G.; Maxted, N.; Mayer, M.; Meintjes, P. J.; Menzler, U.; Meyer, M.; Mitchell, A. M. W.; Moderski, R.; Mohamed, M.; Morå, K.; Moulin, E.; Murach, T.; de Naurois, M.; Niederwanger, F.; Niemiec, J.; Oakes, L.; Odaka, H.; Öttl, S.; Ohm, S.; Ostrowski, M.; Oya, I.; Padovani, M.; Panter, M.; Parsons, R. D.; Paz Arribas, M.; Pekeur, N. W.; Pelletier, G.; Petrucci, P.-O.; Peyaud, B.; Pita, S.; Poon, H.; Prokhorov, D.; Prokoph, H.; Pühlhofer, G.; Punch, M.; Quirrenbach, A.; Raab, S.; Reimer, A.; Reimer, O.; Renaud, M.; de Reyes, R.; Rieger, F.; Romoli, C.; Rosier-Lees, S.; Rowell, G.; Rudak, B.; Rulten, C. B.; Sahakian, V.; Salek, D.; Sanchez, D. A.; Santangelo, A.; Sasaki, M.; Schlickeiser, R.; Schüssler, F.; Schulz, A.; Schwanke, U.; Schwemmer, S.; Seyffert, A. S.; Shafi, N.; Shilon, I.; Simoni, R.; Sol, H.; Spanier, F.; Spengler, G.; Spies, F.; Stawarz, Ł.; Steenkamp, R.; Stegmann, C.; Stinzing, F.; Stycz, K.; Sushch, I.; Tavernet, J.-P.; Tavernier, T.; Taylor, A. M.; Terrier, R.; Tluczykont, M.; Trichard, C.; Tuffs, R.; van der Walt, J.; van Eldik, C.; van Soelen, B.; Vasileiadis, G.; Veh, J.; Venter, C.; Viana, A.; Vincent, P.; Vink, J.; Voisin, F.; Völk, H. J.; Vuillaume, T.; Wadiasingh, Z.; Wagner, S. J.; Wagner, P.; Wagner, R. M.; White, R.; Wierzcholska, A.; Willmann, P.; Wörnlein, A.; Wouters, D.; Yang, R.; Zabalza, V.; Zaborov, D.; Zacharias, M.; Zdziarski, A. A.; Zech, A.; Zefi, F.; Ziegler, A.; Żywucka, N.

2018-04-01

Using the High Energy Spectroscopic System (H.E.S.S.) telescopes we have discovered a steady and extended very high-energy (VHE) γ-ray source towards the luminous blue variable candidate LBV 1806-20, massive stellar cluster Cl* 1806-20, and magnetar SGR 1806-20. The new VHE source, HESS J1808-204, was detected at a statistical significance of >6σ (post-trial) with a photon flux normalisation (2.9 ± 0.4stat ± 0.5sys) × 10-13 ph cm-2 s-1 TeV-1 at 1 TeV and a power-law photon index of 2.3 ± 0.2stat ± 0.3sys. The luminosity of this source (0.2 to 10 TeV; scaled to distance d = 8.7 kpc) is LVHE 1.6 × 1034(d/8.7 kpc)2 erg s-1. The VHE γ-ray emission is extended and is well fit by a single Gaussian with statistical standard deviation of 0.095° ± 0.015°. This extension is similar to that of the synchrotron radio nebula G10.0-0.3, which is thought to be powered by LBV 1806-20. The VHE γ-ray luminosity could be provided by the stellar wind luminosity of LBV 1806-20 by itself and/or the massive star members of Cl* 1806-20. Alternatively, magnetic dissipation (e.g. via reconnection) from SGR 1806-20 can potentially account for the VHE luminosity. The origin and hadronic and/or leptonic nature of the accelerated particles responsible for HESS J1808-204 is not yet clear. If associated with SGR 1806-20, the potentially young age of the magnetar (650 yr) can be used to infer the transport limits of these particles to match the VHE source size. This discovery provides new interest in the potential for high-energy particle acceleration from magnetars, massive stars, and/or stellar clusters.
Error-free Dispersion-uncompensated Transmission at 20 Gb/s over SSMF using a Hybrid III-V/SOI DML with MRR Filtering

DEFF Research Database (Denmark)

Cristofori, Valentina; Kamchevska, Valerija; Ding, Yunhong

2016-01-01

Error-free 20-Gb/s directly-modulated transmission is achieved by enhancing the dispersion tolerance of a III-V/SOI DFB laser with a silicon micro-ring resonator. Low (∼0.4 dB) penalty compared to back-to-back without ring is demonstrated after 5-km SSMF....
Numerical evaluation of tensor Feynman integrals in Euclidean kinematics

Energy Technology Data Exchange (ETDEWEB)

Gluza, J.; Kajda [Silesia Univ., Katowice (Poland). Inst. of Physics; Riemann, T.; Yundin, V. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany)

2010-10-15

For the investigation of higher order Feynman integrals, potentially with tensor structure, it is highly desirable to have numerical methods and automated tools for dedicated, but sufficiently 'simple' numerical approaches. We elaborate two algorithms for this purpose which may be applied in the Euclidean kinematical region and in d=4-2{epsilon} dimensions. One method uses Mellin-Barnes representations for the Feynman parameter representation of multi-loop Feynman integrals with arbitrary tensor rank. Our Mathematica package AMBRE has been extended for that purpose, and together with the packages MB (M. Czakon) or MBresolve (A. V. Smirnov and V. A. Smirnov) one may perform automatically a numerical evaluation of planar tensor Feynman integrals. Alternatively, one may apply sector decomposition to planar and non-planar multi-loop {epsilon}-expanded Feynman integrals with arbitrary tensor rank. We automatized the preparations of Feynman integrals for an immediate application of the package sectordecomposition (C. Bogner and S. Weinzierl) so that one has to give only a proper definition of propagators and numerators. The efficiency of the two implementations, based on Mellin-Barnes representations and sector decompositions, is compared. The computational packages are publicly available. (orig.)
Radiation protection issues after 20 years of LHC operation

CERN Document Server

Forkel-Wirth, D.; Roesler, S.; Theis, C.; Ulrici, L.; Vincke, H.; Vincke, Hz.

2011-01-01

Since November 2009, the LHC commissioning progresses very well, both with proton and lead beams. It will continue in 2011 and nominal LHC operation is expected to be attained in 2013. In parallel, plans for various LHC upgrades are under discussion, suggesting a High-Luminosity (HL) upgrade first and a High-Energy (HE) upgrade in a later state. Whereas the upgrade in luminosity would require the modification of only some few key accelerator components like the inner triplets, the upgrade in beam energy from 7 TeV to 16.5 TeV would require the exchange of all dipoles and of numerous other accelerator components. The paper gives an overview of the radiation protection issues related to the dismantling of LHC components prior to the installation of the HE-LHC components, i.e. after about 20 years of LHC operation. Two main topics will be discussed: (i) the exposure of workers to ionizing radiation during the dismantling of dipoles, inner triplets or collimators and experiments and (ii) the production, condition...
ANALISIS PENGARUH REKONFIGURASI GROUNDING KABEL POWER 20 kV TERHADAP ERROR RATIO CURRENT TRANSFORMERS PELANGGAN TEGANGAN MENENGAH DI HOTEL GOLDEN TULIP SEMINYAK

Directory of Open Access Journals (Sweden)

Kadek Amerta Yasa

2017-10-01

Full Text Available Hotel Golden Tulip Seminyak merupakan pelanggan listrik tegangan menengah yang sangat potensial. Pada penelitian di hotel ini, kami menemukan bahwa error ratio trafo arus sebelum rekonfigurasi grounding berkisar – 67% dan rugi-rugi daya sebesar - 214.809,00 W pada persentase beban 20%. Error ratio memengaruhi arus yang terbaca di sisi sekunder trafo dan juga memengaruhi rugi daya. Upaya yang dilakukan untuk mengurangi nilai error ratio dan rugi daya tersebut yaitu dengan melakukan rekonfigurasi grounding yaitu dengan memindahkan posisi tap grounding kabel power 20 kV masuk kembali melalui sisi primer trafo arus. Nilai error ratio setelah rekonfigurasi grounding diperoleh berkisar – 0,05% dan rugi-rugi daya - 20,18 W pada persentase beban 20%.
People and things. CERN Courier, June 1980, v. 20(4)

International Nuclear Information System (INIS)

Anon.

1980-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: On 25th April at a specially convened session of the CERN Council delegates of the twelve CERN Member States unanimously appointed Professor Herwig Schopper as Director General of CERN for the five years 1981-85; On 1 April, His Royal Highness Prince Charles went on a short tour of the TRIUMF site during a visit to Vancouver; An International Symposium on the History of Particle Physics was held at Fermilab from 28-31 May. It concentrated on the origins of particle physics back in the 1930s and 40s before the advent of the big particle accelerators; The Regents of the University of California have approved the formation of a new Institute for Particle Physics on its Santa Cruz Campus. Acronymed SCIPP (the Santa Cruz Institute for Particle Physics I it builds on the strength of existing groups of theoretical and experimental particle physicists; On 18 April, Fermilab brought into operation the world's largest helium liquefier plant; During a few shifts devoted to machine developments on 20 April, the stored beam of PETRA reached the design energy of 19 GeV. ; Earlier this year, a high energy physics meeting, organized by the Academia Sinica, was held in the pleasant winter climate of Guangzhou, Canton.; At a Physics Congress in Ulm the Chancellor of the Federal Republic of Germany, Helmut Schmidt, voiced his unambiguous support for fundamental research

V S C Manga Rao

Indian Academy of Sciences (India)

Home; Journals; Pramana – Journal of Physics. V S C Manga Rao. Articles written in Pramana – Journal of Physics. Volume 61 Issue 3 September 2003 pp 563-575 Research Articles. Phase conjugation of gap solitons: A numerical study · V S C Manga Rao S Dutta Gupta · More Details Abstract Fulltext PDF. We study the ...
Introduction of a conceptual model for integrating the MMPI-2-RF into HCR-20V3 violence risk assessments and associations between the MMPI-2-RF and institutional violence.

Science.gov (United States)

Tarescavage, Anthony M; Glassmire, David M; Burchett, Danielle

2016-12-01

Reflecting the need to prevent violence, structured professional judgment assessment tools have been developed specifically to assess the likelihood of future violence. These tools typically integrate data from clinical interviews and collateral records to assist in the conceptualization of violence risk, but objective psychological testing may also be useful in completing the instruments. The authors describe the advantages of using the Minnesota Multiphasic Personality Inventory-2-Restructured Form (MMPI-2-RF) in this manner with the Historical Clinical Management-20 Version 3 (HCR-20 V3 ). Accordingly, they have 2 purposes. First, they sought to identify conceptual links between the constructs measured by the tools and introduce a model to integrate MMPI-2-RF findings into an HCR-20 V3 risk assessment. Second, although the authors did not have collateral HCR-20 V3 ratings, they sought to examine associations between the MMPI-2-RF scales and future violence in a sample of 303 psychiatric patients (233 males, 70 females) adjudicated as not guilty by reason of insanity. The authors found that the MMPI-2-RF scales demonstrated significant, meaningful associations with a count of future violent acts at the hospital. The largest associations involved scales measuring emotional dysregulation and externalizing dysfunction. These associations were qualified by relative risk ratio analyses indicating that patients producing elevations on these scales were at 1.5 to 2.5 times greater risk of future violence than those without elevations. Overall, the findings indicated that most MMPI-2-RF scales conceptually linked to the HCR-20 V3 risk factors were associated with future violence. In light of these findings, the authors discuss recommendations for integrating the MMPI-2-RF when interpreting HCR-20 V3 risk factors. (PsycINFO Database Record (c) 2016 APA, all rights reserved).
Rapidity and energy dependence of the electric charge correlations in A+A collisions from 20A to 158A GeV

NARCIS (Netherlands)

Botje, M.A.J.; van Leeuwen, M.; Mischke, A.

2007-01-01

Results from electric charge correlations studied with the Balance Function (BF) method in A+A collisions from 20A to 158A GeV are presented in two different rapidity intervals: In the midrapidity region we observe a decrease of the width of the BF distribution with increasing centrality of the
A high-resolution study of the sup 20 Ne( sup 3 He,t) sup 20 Na reaction and the sup 19 Ne(p,. gamma. ) sup 20 Na reaction rate

Energy Technology Data Exchange (ETDEWEB)

Smith, M S; Magnus, P V; Hahn, K I; Howard, A J; Parker, P D [A.W. Wright Nuclear Structure Lab., Yale Univ., New Haven, CT (United States); Champagne, A E; Mao, Z Q [Dept. of Physics, Princeton Univ., NJ (United States)

1992-01-13

A high-precision measurement of the {sup 20}Ne({sup 3}He,t){sup 20}Na reaction has been made using implanted {sup 20}Ne transmission targets to obtain pertinent information on the low-energy resonances in the {sup 19}Ne(p,{gamma}){sup 20}Na reaction. Resonance energies (447{+-}5, 658{+-}5, 787{+-}5, and 857{+-}5 keV) and upper limits on total intrinsic widths (<10, <6, <10, and <16 keV) have been measured for four excited states above the 2.199 MeV proton threshold in {sup 20}Na. The stellar {sup 19}Ne(p,{gamma}){sup 20}Na reaction rate is calculated for temperatures between 1x10{sup 8} and 1x10{sup 9} K. When combined with a recent study of the {sup 15}O({alpha},{gamma}){sup 19}Ne reaction, a new estimate is made of the conditions required for breakout from the Hot CNO cylce to the rapid proton capture process. (orig.).
A new numerical method for inverse Laplace transforms used to obtain gluon distributions from the proton structure function

Energy Technology Data Exchange (ETDEWEB)

Block, Martin M. [Northwestern University, Department of Physics and Astronomy, Evanston, IL (United States); Durand, Loyal [University of Wisconsin, Department of Physics, Madison, WI (United States)

2011-11-15

We recently derived a very accurate and fast new algorithm for numerically inverting the Laplace transforms needed to obtain gluon distributions from the proton structure function F{sub 2}{sup {gamma}}{sup p}(x,Q{sup 2}). We numerically inverted the function g(s), s being the variable in Laplace space, to G(v), where v is the variable in ordinary space. We have since discovered that the algorithm does not work if g(s){yields}0 less rapidly than 1/s as s{yields}{infinity}, e.g., as 1/s{sup {beta}} for 0 <{beta}<1. In this note, we derive a new numerical algorithm for such cases, which holds for all positive and non-integer negative values of {beta}. The new algorithm is exact if the original function G(v) is given by the product of a power v{sup {beta}}{sup -1} and a polynomial in v. We test the algorithm numerically for very small positive {beta}, {beta}=10{sup -6} obtaining numerical results that imitate the Dirac delta function {delta}(v). We also devolve the published MSTW2008LO gluon distribution at virtuality Q{sup 2}=5 GeV{sup 2} down to the lower virtuality Q{sup 2}=1.69 GeV{sup 2}. For devolution, {beta} is negative, giving rise to inverse Laplace transforms that are distributions and not proper functions. This requires us to introduce the concept of Hadamard Finite Part integrals, which we discuss in detail. (orig.)
Numerical computation of soliton dynamics for NLS equations in a driving potential

Directory of Open Access Journals (Sweden)

Marco Caliari

2010-06-01

Full Text Available We provide numerical computations for the soliton dynamics of the nonlinear Schrodinger equation with an external potential. After computing the ground state solution r of a related elliptic equation we show that, in the semi-classical regime, the center of mass of the solution with initial datum built upon r is driven by the solution to $ddot x=- abla V(x$. Finally, we provide examples and analyze the numerical errors in the two dimensional case when V is a harmonic potential.
Problematika sebereflexe v románu 20. století

OpenAIRE

KOUDELKOVÁ, Jana

2011-01-01

This diploma thesis deals with the problems of the self-reflection in the prose of the 20th century. At first there are described the techniques of the narration, which appeared in the 20th century. Then there are defined the general signs of the self-reflection and the influence of social situation on the increase of the self-reflection. In the next section the work involves the analysis of the novel Život a názory blahorodého pana Tristrama Shandyho. The conception of the self-reflection is...
Prueba de dosificación de la sembradora V-20 con semilla de amaranto (amaranthus hypochondriacus l.)

OpenAIRE

Pedro Mayans Céspedes; José R. Soca Cabrera; Gilberto López Canteñs; Eugenio Romantchik Kriuchkova

2009-01-01

En el presente trabajo se muestran los resultados de la prueba de dosificación realizada a la sembradora V-20 con semilla de amaranto. Para la prueba se contó con un banco construido en las instalaciones del Centro Nacional de Estandarización de Maquinaria Agrícola (CENEMA), utilizándose la Norma Mexicana: "Método de evaluación de sembradoras y/o fertilizadoras de tracción mecánica con dosificador de disco" y la Norma Cubana 34-50 "Sembradora de granos, metodología para la realización de las ...
Measurement of the X-ray mass attenuation coefficients of silver in the 5-20 keV range.

Science.gov (United States)

Islam, M Tauhidul; Tantau, Lachlan J; Rae, Nicholas A; Barnea, Zwi; Tran, Chanh Q; Chantler, Christopher T

2014-03-01

The X-ray mass attenuation coefficients of silver were measured in the energy range 5-20 keV with an accuracy of 0.01-0.2% on a relative scale down to 5.3 keV, and of 0.09-1.22% on an absolute scale to 5.0 keV. This analysis confirms that with careful choice of foil thickness and careful correction for systematics, especially including harmonic contents at lower energies, the X-ray attenuation of high-Z elements can be measured with high accuracy even at low X-ray energies (silver in the low energy range, indicating the possibility of obtaining high-accuracy X-ray absorption fine structure down to the L1 edge (3.8 keV) of silver. Comparison of results reported here with an earlier data set optimized for higher energies confirms accuracy to within one standard error of each data set collected and analysed using the principles of the X-ray extended-range technique (XERT). Comparison with theory shows a slow divergence towards lower energies in this region away from absorption edges. The methodology developed can be used for the XAFS analysis of compounds and solutions to investigate structural features, bonding and coordination chemistry.
Inflammation in disseminated lesions: an analysis of CD4+, CD20+, CD68+, CD31+ and vW+ cells in non-ulcerated lesions of disseminated leishmaniasis

Directory of Open Access Journals (Sweden)

Dayana Santos Mendes

2013-02-01

Full Text Available Disseminated leishmaniasis (DL differs from other clinical forms of the disease due to the presence of many non-ulcerated lesions (papules and nodules in non-contiguous areas of the body. We describe the histopathology of DL non-ulcerated lesions and the presence of CD4-, CD20-, CD68-, CD31- and von Willebrand factor (vW-positive cells in the inflamed area. We analysed eighteen biopsies from non-ulcerated lesions and quantified the inflamed areas and the expression of CD4, CD20, CD68, CD31 and vW using Image-Pro software (Media Cybernetics. Diffuse lymphoplasmacytic perivascular infiltrates were found in dermal skin. Inflammation was observed in 3-73% of the total biopsy area and showed a significant linear correlation with the number of vW+ vessels. The most common cells were CD68+ macrophages, CD20+ B-cells and CD4+ T-cells. A significant linear correlation between CD4+ and CD20+ cells and the size of the inflamed area was also found. Our findings show chronic inflammation in all DL non-ulcerated lesions predominantly formed by macrophages, plasmacytes and T and B-cells. As the inflamed area expanded, the number of granulomas and extent of the vascular framework increased. Thus, we demonstrate that vessels may have an important role in the clinical evolution of DL lesions.
Adjacent Vehicle Number-Triggered Adaptive Transmission for V2V Communications.

Science.gov (United States)

Wei, Yiqiao; Chen, Jingjun; Hwang, Seung-Hoon

2018-03-02

For vehicle-to-vehicle (V2V) communication, such issues as continuity and reliability still have to be solved. Specifically, it is necessary to consider a more scalable physical layer due to the high-speed mobility of vehicles and the complex channel environment. Adaptive transmission has been adapted in channel-dependent scheduling. However, it has been neglected with regards to the physical topology changes in the vehicle network. In this paper, we propose a physical topology-triggered adaptive transmission scheme which adjusts the data rate between vehicles according to the number of connectable vehicles nearby. Also, we investigate the performance of the proposed method using computer simulations and compare it with the conventional methods. The numerical results show that the proposed method can provide more continuous and reliable data transmission for V2V communications.
Inclusive photoproduction of rho and ω in the photon energy range 20 to 70 GeV

International Nuclear Information System (INIS)

Atkinson, M.; Laberrigue, J.; Levy, J.M.; La Vaissiere, C. de; Yiou, T.P.; Lassalle, J.C.; Patrick, G.N.; Storr, K.M.; Axon, T.J.; Barberis, D.; Brodbeck, T.J.; Brookes, G.R.; Bunn, J.J.; Bussey, P.J.; Clegg, A.B.; Dainton, J.B.; Davenport, M.; Dickinson, B.; Diekmann, B.; Donnachie, A.; Ellison, R.J.; Flower, P.; Hughes-Jones, R.E.; Hutton, J.S.; Ibbotson, M.; Jakob, H.P.; Jung, M.; Kemp, M.A.R.; Kumar, B.R.; Lafferty, G.D.; Lane, J.B.; Liebenau, V.; McClatchey, R.H.; Mercer, D.; Morris, J.A.G.; Morris, J.V.; Newton, D.; Paterson, C.; Paul, E.; Raine, C.; Reidenbach, M.; Rotscheidt, H.; Schloesser, A.; Sharp, P.H.; Skillicorn, I.O.; Smith, K.M.; Thompson, R.J.; Waite, A.P.; Worsell, M.F.

1984-01-01

Inclusive production of rho 0 , ω, and rhosup(+-) at low transverse momentum has been measured in γp collisions with photons of energy 20 to 70 GeV. The vector mesons have been studied as functions of the Feynman variable chisub(F), varying between -0.2 and 0.95, i.e. excluding the 'elastic' peaks of rho 0 and ω photoproduction. For chisub(F) 0 ) approx.= sigma (ω) approx.= 1/2[sigma(p + ) + sigma(p - )]. For chisub(F) > 0.6, it is observed that sigma(p 0 ) > sigma(ω) >=1/2[sigma(rho + )+sigma(rho - )] and the differences increase with increasing chisub(F). Over the rhosub(F) range -0.2 0 and ω production. (orig.)
Elastic scattering of 7Li projectiles in the energy range of 20 to 34 MeV

International Nuclear Information System (INIS)

Khallaf, S.A.E.

1983-01-01

As far as it is known, the Watanabe folding model has not been used to analyse the elastic scattering of 7 Li projectiles. The main purpose of the present work is to calculate the differential cross sections for 7 Li elastic scattering von 90 Zr, 48 , 40 Ca, 16 O and 12 C at incident energies of 20 to 34 MeV using the Watanabe folding model and to study the applicability of this model for 7 Li elastic scattering. The potentials of 7 Li ions are revealed by Taylor expansions of alpha and triton cluster potentials. The resulting differential cross sections are compared with the predicted cross sections using phenomenological potentials of 7 Li ions. (orig./WL)
Numerical simulation of runaway electron effect on Plasma Facing Components

International Nuclear Information System (INIS)

Ezato, Koichiro; Suzuki, Satoshi; Akiba, Masato; Kunugi, Tomoaki

1998-07-01

The runaway electron effects on Plasma Facing Components (PFCs) are studied by the numerical analyses. The present study is the first investigation of time-dependent thermal response of PFCs caused by runaway electron impact. For this purpose, we developed a new integrated numerical code, which consists of the Monte Carlo code for the coupled electrons and photons transport analysis and the finite element code for the thermo-mechanical analysis. In this code, we apply the practical incident parameters and distribution of runaway electrons recently proposed by S. Putvinski, which can express the time-dependent behavior of runaway electrons impact. The incident parameters of electrons in this study are the energy density ranging from 10 to 75 MJ/m 2 , the average electrons' energy of 12.5 MeV, the incident angle of 0.01deg and the characteristic time constant for decay of runaway electrons event of 0.15sec. The numerical results showed that the divertor with CFC (Carbon-Fiber-Composite) armor did not suffer serious damage. On the other hand, maximum temperatures at the surface of the divertor with tungsten armor and the first wall with beryllium armor exceed the melting point in case of the incident energy density of 20 and 50 MJ/m 2 . Within the range of the incident condition of runaway electrons, the cooling pipe of each PFCs can be prevented from the melting or burn-out caused by runaway electrons impact, which is one of the possible consequences of runaway electrons event so far. (author)
Neutron-induced fission cross-section of 233U, 241Am and 243Am in the energy range 0.5 MeV ≤ En ≤ 20 MeV

International Nuclear Information System (INIS)

Belloni, F.; Milazzo, P.M.; Calviani, M.

2011-01-01

Neutron-induced fission cross-sections of 233 U, 241 Am and 243 Am relative to 235 U have been measured in a wide energy range at the neutron time of flight facility n-TOF in Geneva to address the present discrepancies in evaluated and experimental databases for reactions and isotopes relevant for transmutation and new generation fast reactors. A dedicated fast ionization chamber was used. Each isotope was mounted in a different cell of the modular detector. The measurements took advantage of the characteristics of the n-TOF installation. Its intrinsically low background, coupled to its high instantaneous neutron flux, results in high accuracy data. Its wide energy neutron spectrum helps to reduce systematic uncertainties due to energy-domain matching problems while the 185 m flight path and a 6 ns pulse width assure an excellent energy resolution. This paper presents results obtained between 500 keV and 20 MeV neutron energy. (authors)
vSphere high performance cookbook

CERN Document Server

Sarkar, Prasenjit

2013-01-01

vSphere High Performance Cookbook is written in a practical, helpful style with numerous recipes focusing on answering and providing solutions to common, and not-so common, performance issues and problems.The book is primarily written for technical professionals with system administration skills and some VMware experience who wish to learn about advanced optimization and the configuration features and functions for vSphere 5.1.
Analysis of Plane-Parallel Electron Beam Propagation in Different Media by Numerical Simulation Methods

Science.gov (United States)

Miloichikova, I. A.; Bespalov, V. I.; Krasnykh, A. A.; Stuchebrov, S. G.; Cherepennikov, Yu. M.; Dusaev, R. R.

2018-04-01

Simulation by the Monte Carlo method is widely used to calculate the character of ionizing radiation interaction with substance. A wide variety of programs based on the given method allows users to choose the most suitable package for solving computational problems. In turn, it is important to know exactly restrictions of numerical systems to avoid gross errors. Results of estimation of the feasibility of application of the program PCLab (Computer Laboratory, version 9.9) for numerical simulation of the electron energy distribution absorbed in beryllium, aluminum, gold, and water for industrial, research, and clinical beams are presented. The data obtained using programs ITS and Geant4 being the most popular software packages for solving the given problems and the program PCLab are presented in the graphic form. A comparison and an analysis of the results obtained demonstrate the feasibility of application of the program PCLab for simulation of the absorbed energy distribution and dose of electrons in various materials for energies in the range 1-20 MeV.
Color-Space-Based Visual-MIMO for V2X Communication.

Science.gov (United States)

Kim, Jai-Eun; Kim, Ji-Won; Park, Youngil; Kim, Ki-Doo

2016-04-23

In this paper, we analyze the applicability of color-space-based, color-independent visual-MIMO for V2X. We aim to achieve a visual-MIMO scheme that can maintain the original color and brightness while performing seamless communication. We consider two scenarios of GCM based visual-MIMO for V2X. One is a multipath transmission using visual-MIMO networking and the other is multi-node V2X communication. In the scenario of multipath transmission, we analyze the channel capacity numerically and we illustrate the significance of networking information such as distance, reference color (symbol), and multiplexing-diversity mode transitions. In addition, in the V2X scenario of multiple access, we may achieve the simultaneous multiple access communication without node interferences by dividing the communication area using image processing. Finally, through numerical simulation, we show the superior SER performance of the visual-MIMO scheme compared with LED-PD communication and show the numerical result of the GCM based visual-MIMO channel capacity versus distance.
Coupled-channel optical calculation of electron-atom scattering: elastic scattering from sodium at 20 to 150 eV

International Nuclear Information System (INIS)

Bray, Igor; Konovalov, D.A.; McCarthy, I.E.

1991-04-01

A coupled-channel optical method for electron-atom scattering is applied to elastic electron-sodium scattering at energies of 20, 22.1, 54.4, 100, and 150 eV. It is demonstrated that the effect of all the inelastic channels on elastic scattering may be well reproduced by the 'ab initio' calculated complex non-local polarization potential. Whilst the experiments generally agree at small angles and therefore agree on the total elastic cross section, there is considerable discrepancy at intermediate and backward angles. 9 refs., 2 tabs., 1 fig
Informace - komunikace - věda - výzkum

Czech Academy of Sciences Publication Activity Database

Papíková, Vendula; Papík, R.

2007-01-01

Roč. 11, č. 3 (2007), s. 14-18 ISSN 1335-793X R&D Projects: GA MŠk(CZ) 1M06014; GA AV ČR IAA701010606 Institutional research plan: CEZ:AV0Z10300504 Keywords : komunikace vědeckých informací * vědecké lékařské informace * Web 2.0 Subject RIV: IN - Informatics, Computer Science

A new numerical method for inverse Laplace transforms used to obtain gluon distributions from the proton structure function

International Nuclear Information System (INIS)

Block, Martin M.; Durand, Loyal

2011-01-01

We recently derived a very accurate and fast new algorithm for numerically inverting the Laplace transforms needed to obtain gluon distributions from the proton structure function F 2 γp (x,Q 2 ). We numerically inverted the function g(s), s being the variable in Laplace space, to G(v), where v is the variable in ordinary space. We have since discovered that the algorithm does not work if g(s)→0 less rapidly than 1/s as s→∞, e.g., as 1/s β for 0 β-1 and a polynomial in v. We test the algorithm numerically for very small positive β, β=10 -6 obtaining numerical results that imitate the Dirac delta function δ(v). We also devolve the published MSTW2008LO gluon distribution at virtuality Q 2 =5 GeV 2 down to the lower virtuality Q 2 =1.69 GeV 2 . For devolution, β is negative, giving rise to inverse Laplace transforms that are distributions and not proper functions. This requires us to introduce the concept of Hadamard Finite Part integrals, which we discuss in detail. (orig.)
Experimental determination of the real elements of the density matrix of H(n=3) atoms produced in 20--100-keV collisions of H+ on Kr

International Nuclear Information System (INIS)

Seifert, N.; Gibson, N.D.; Risley, J.S.

1995-01-01

In continuation of our previous work, charge transfer processes occurring in protons on rare-gas-atom collisions have been investigated. Diagonal and real off-diagonal coherence elements of the density matrix for H(n=3) atoms produced in 20--100-keV electron-capture collisions with Kr atoms are experimentally determined by analyzing the Balmer-α light from the decay of H atoms from the (n=3) state to the (n=2) state. The intensity and polarization of the emitted light are measured as functions of an axially symmetric electric field in the collision region. These data are fitted to a numerical model of the H atom in an electric field in order to extract density-matrix elements. The results are compared to previous studies of H + on He and Ar. The collisionally produced dipole moment of the H(n=3) atom decreases for increasing atomic number of the rare-gas target atoms, which indicates that the final phase of the collision process is not essential for the formation of the dipole moment. This physical picture is further supported by our alignment data. Absolute cross sections for charge transfer to the 3s, 3p, and 3d levels are presented as well
Adjacent Vehicle Number-Triggered Adaptive Transmission for V2V Communications

Science.gov (United States)

Wei, Yiqiao; Chen, Jingjun

2018-01-01

For vehicle-to-vehicle (V2V) communication, such issues as continuity and reliability still have to be solved. Specifically, it is necessary to consider a more scalable physical layer due to the high-speed mobility of vehicles and the complex channel environment. Adaptive transmission has been adapted in channel-dependent scheduling. However, it has been neglected with regards to the physical topology changes in the vehicle network. In this paper, we propose a physical topology-triggered adaptive transmission scheme which adjusts the data rate between vehicles according to the number of connectable vehicles nearby. Also, we investigate the performance of the proposed method using computer simulations and compare it with the conventional methods. The numerical results show that the proposed method can provide more continuous and reliable data transmission for V2V communications. PMID:29498646
Microsoft Hyper-V cluster design

CERN Document Server

Siron, Eric

2013-01-01

This book is written in a friendly and practical style with numerous tutorials centred on common as well as atypical Hyper-V cluster designs. This book also features a sample cluster design throughout to help you learn how to design a Hyper-V in a real-world scenario.Microsoft Hyper-V Cluster Design is perfect for the systems administrator who has a good understanding of Windows Server in an Active Directory domain and is ready to expand into a highly available virtualized environment. It only expects that you will be familiar with basic hypervisor terminology.
The numerical simulation of the WWER-440/V-213 reactor pressure vessel internals response to maximum hypothetical large break loss of coolant accident

International Nuclear Information System (INIS)

Hermansky, P.; Krajcovic, M.

2012-01-01

The reactor internals are designed to ensure cooling of the fuel, to ensure the movement of emergency control assemblies under all operating conditions including accidents and facilitate removal of the fuel and of the internals following an accident This paper presents results of the numerical simulation of the WWER-440/V213 reactor vessel internals dynamic response to maximum hypothetical Large-Break Loss of Coolant Accident. The purpose of this analysis is to determine the reactor vessel internals response due to rapid depressurization and to prove no such deformations occur in the reactor vessel internals which would prevent timely and proper activation of the emergency control assemblies. (Authors)
Moodsad ja võimekad

Index Scriptorium Estoniae

2014-01-01

TM võrdleb: nelikveolised universaalid: Audi A4 Allroad 2,0 TDI Quattro S tronic, Opel Insignia Country Tourer 2,0 CDTI BiTurbo 4×4 A, Peugeot 508 RXH HYbrid4, Subaru Outback 2,0 D Lineartronic, Volkswagen Passat Alltrack 2,0 TDI 4Motion DSG, Volvo XC70 D4 Momentum AWD
Cross sections and differential spectra for reactions of 2-20 MeV neutrons on /sup nat/Cr

International Nuclear Information System (INIS)

Blann, M.; Komoto, T.T.

1988-01-01

This report summarizes product yields, secondary n,p and α spectra, and γ-ray spectra calculated for incident neutrons of 2 to 20 MeV on /sup nat/Cr targets. Results are all from the code ALICE, using the version ALISO which does weighting of results for targets which are a mix of isotopes. Where natural isotopic targets are involved, yields and n,p,α spectra will be reported weighted over isotopic yields. Gamma-ray spectra, however, will be reported for the most abundant isotope. We present product yields versus incident neutron energy, n,p,α spectra versus incident neutron energy, and calculated γ-ray spectra
Multiple ionization of noble gases by 2.0 MeV proton impact: comparison with equi-velocity electron impact ionization

International Nuclear Information System (INIS)

Melo, W.S.; Santos, A.C.F.; Sant'Anna, M.M.; Sigaud, G.M.; Montenegro, E.C.

2002-01-01

Absolute single- and multiple-ionization cross sections of rare gases (He, Ne, Ar, Kr and Xe) have been measured for collisions with 2.0 MeV p + . A comparison is made with equi-velocity electron impact ionization cross sections as well as with the available proton impact data. For the light rare gases the single-ionization cross sections are essentially the same for both proton and electron impacts, but increasing differences appear for the heavier targets. (author). Letter-to-the-editor
Simple Numerical Schemes for the Korteweg-deVries Equation

International Nuclear Information System (INIS)

McKinstrie, C. J.; Kozlov, M.V.

2000-01-01

Two numerical schemes, which simulate the propagation of dispersive non-linear waves, are described. The first is a split-step Fourier scheme for the Korteweg-de Vries (KdV) equation. The second is a finite-difference scheme for the modified KdV equation. The stability and accuracy of both schemes are discussed. These simple schemes can be used to study a wide variety of physical processes that involve dispersive nonlinear waves
Simple Numerical Schemes for the Korteweg-deVries Equation

Energy Technology Data Exchange (ETDEWEB)

C. J. McKinstrie; M. V. Kozlov

2000-12-01

Two numerical schemes, which simulate the propagation of dispersive non-linear waves, are described. The first is a split-step Fourier scheme for the Korteweg-de Vries (KdV) equation. The second is a finite-difference scheme for the modified KdV equation. The stability and accuracy of both schemes are discussed. These simple schemes can be used to study a wide variety of physical processes that involve dispersive nonlinear waves.
Measurement of the total ZZ production cross section in proton-proton collisions at √s = 8 TeV in 20 fb−1 with the ATLAS detector

CERN Document Server

The ATLAS collaboration

2013-01-01

The ZZ production cross section has been measured by the ATLAS experiment using the four-lepton decay channel, where the term lepton implies electrons and muons. A data sample of 20.3±0.6 fb−1 collected in pp collisions at √s = 8 TeV at the LHC in 2012 is used. Events are selected by requiring four leptons, forming two opposite-sign same-flavour lepton pairs each with an invariant mass between 66 GeV and 116 GeV. We observe 305 candidate events with a background expectation of 20.4±2.9(stat)±5.0(syst.). The ZZ → l−l+l′−l′+ production cross section is measured to be 20.7+1.3(stat.) ± 0.8(syst.) ± 0.6(lumi.) fb in a −1.2 fiducial phase-space corresponding closely to the acceptance region. After correcting for the ZZ → l−l+l′−l′+ branching fraction and the fiducial acceptance, the total ZZ production cross section is measured to be 7.1+0.5(stat.)±0.3(syst.)±0.2(lumi.) pb, where the total cross −0.4 section is defined by requiring both Z bosons to have an invariant mass be...
Mass distribution of fission-like fragments formed in 20Ne + 165Ho system at Elab≈ 8.2 MeV/A

International Nuclear Information System (INIS)

Singh, D.; Linda, Sneha Bharti; Giri, Pankaj K.

2017-01-01

In the present work, an attempt has been made to study CFF and IFF in 20 Ne + 165 Ho system at projectile energy ≈ 8.2 MeV/A. Twelve fission like fragments (FLF) produced through complete fusion-fission (CFF) and/or incomplete fusion-fission (IFF) in the present system have been identified. The production cross-sections of identified fission like fragments have been measured and the mass distribution of fission like fragments studied
Photo-double ionisation of the Ne 2s studied in equal-energy-sharing condition at 20 eV above threshold

Energy Technology Data Exchange (ETDEWEB)

Bolognesi, P. [CNR-IMIP, Area della Ricerca di Roma 1, CP10, 00016 Monterotondo Scalo (Italy); Otranto, S. [CONICET and Depto. de Fisica, Universidad Nacional del Sur, 8000 Bahia Blanca (Argentina); Garibotti, C.R. [CONICET and Centro Atomico Bariloche, 8400 S.C. de Bariloche (Argentina); Flammini, R. [CNR-IMIP, Area della Ricerca di Roma 1, CP10, 00016 Monterotondo Scalo (Italy); Alberti, G. [CNR-IMIP, Area della Ricerca di Roma 1, CP10, 00016 Monterotondo Scalo (Italy); Avaldi, L. [CNR-IMIP, Area della Ricerca di Roma 1, CP10, 00016 Monterotondo Scalo (Italy)]. E-mail: lorenzo.avaldi@imip.cnr.it

2005-06-15

The triple differential cross-section (TDCS) for the photo-double ionisation of Ne leading to the Ne{sup 2+}(2s{sup -2}2p{sup 6}) has been measured 20 eV above threshold in equal-energy-sharing conditions. The results are compared with the recently introduced SC3 model, which can be used to study targets different from He since it allows an easy implementation with different initial-state wavefunctions.
Cross measurements of linear momentum transfer and energy dissipation in collisions between 290 MeV 20Ne and 238U

International Nuclear Information System (INIS)

Galin, J.; Ingold, G.; Jahnke, U.; Hilscher, D.; Lehmann, M.; Rossner, H.; Schwinn, E.

1988-01-01

The 20 Ne+U reactions are investigated at 290 MeV bombarding energy. The linear momentum transfer and excitation energy are deduced eventwise from the respective measurements of the folding angle between correlated fission fragments and the neutron multiplicity. A simple incomplete fusion picture is shown to essentially account for the data. The sensitivity of the two measurements in order to infer the violence of a collision is discussed in details. (orig.)
Estimation of the measurement effective point in cylindrical ionization chamber used in electron beams with energies between 6 and 20 MeV

International Nuclear Information System (INIS)

Araujo, M.M. de.

1984-01-01

The radial displacement was determined in a water phantom for electrons beams at energies from 6 to 20 MeV for three commercial cylindrical ionization chambers of internal diameters varying from 3.5 to 9.0 mm. The chambers were irradiated with the main axis perpendicular to the direction of the beam. A 300 V bias voltage was applied and readings were taken with both polarities. It was observed that, with increasing depth in the water phantom, the radial displacement remains constant for the 8.9 MeV beam, it increases for the 12.6 MeV electrons and decreases for those of 16.8 and 19.7 MeV. A theoretical model was built in order to calculate the displacement of the effective point of measurement. The Fermi-Eyges multiple scattering theory and a retangular beam normalism developed by Jette (1983) for therapeutic electron beam are used. It was found that the radial displacement stays constant with increasing depth and it decreases with increasing average energy of the incident beam. The model also predicts that the displacement is dependent on the chamber radius. The experimental and theoretical results are compared. They show good agreement for 8.9 and 12.6 MeV electrons, while for 16.8 and 19.7 MeV electrons they indicate that modifications in the theoretical model are necessary. (Author) [pt
Electric field studies of a 2 MeV electrostatic energy analyzer

International Nuclear Information System (INIS)

McLaren, P.E.; Connor, K.A.; Lewis, J.F.; Hickok, R.L.; Crowley, T.P.; Schatz, J.G.; Vilardi, G.H.

1990-01-01

An energy analyzer based on the Proca and Green parallel-plate design is being developed for use with the 2 MeV heavy ion beam probe on TEXT. In a departure from the conventional configuration, guard ring electrodes will not be used. Instead, a shaped top plate will provide for comparable, or improved, uniformity of the analyzer electric field region. To quantify this effect, and to characterize the electrostatic field, numerical solution methods have been utilized. Simulations have included effects of top plate shape, wire screens, vacuum chamber design, and dielectric support structures. The modeling has permitted us to design an analyzer electrode structure that is an integral part of a uniquely shaped vacuum vessel. The design electric field is 20 kV/cm with less than 1% error in uniformity within the parallel plate region. To examine the electric field structure experimentally, a quarter-scale prototype analyzer has been constructed and tested. The electric field characteristics are examined by varying the path of a heavy ion beam through the analyzer and examining the resulting analyzer performance. A simulated vacuum wall can be positioned to examine the effects of different vessel configurations and to determine the sensitivity of the analyzer to this boundary condition. The experimental results show excellent agreement with the numerically predicted fields and confirm the validity of the shaped top plate electrode concept
Alpha-particle breakup at incident energies of 20 and 40 MeV/nucleon

International Nuclear Information System (INIS)

Wu, J.R.; Chang, C.C.; Holmgren, H.D.; Koontz, R.W.

1979-01-01

The breakup of alpha particles at incident energies of 20 and 40 MeV/nucleon on 27 Al, 58 Ni, 90 Zr, and 209 Bi has been studied. It was found that the breakup cross section decreases rapidly with increasing angles and increases with increasing target mass and incident energy. The total breakup yield, summed over all charged fragments, is approx.15--35% of the alpha-particle total reaction cross section, and has an approximate A/sup 1/3/ dependence. The ratios of breakup yields among different fragments are approximately p:d:t: 3 He approx. = 13:3:1:2, and are roughly independent of the incident energy and the target nucleus. These features suggest that the alpha-particle fragmentation is a peripheral process and is dominated by the properties of the incident projectile. A simple plane-wave alpha-particle breakup model gives a rather good description to the experimental data. In addition to the breakup deuteron peak at half of the beam energy, a second peak at quarter of the beam energy (or the same energy as the breakup proton peak) is observed. This peak might be due to a two-step breakup-pickup process
Adjustment of a goniometer for X-rays optics calibration in the spectral range 1.5-20 KeV

International Nuclear Information System (INIS)

Legistre, S.

1992-10-01

The aim of this memoir is the adjustment of a (θ, 2θ) goniometer coupled to X-rays source to calibrate mirrors (single layers like C, Ni, Au, etc... and multilayers like C/W, Si/W, etc...) in the spectral range 1.5 - 20 keV. For each kind of tested optics the adjustment of the goniometer include the procedure alignment of the different components (X-ray source, collimation slits, optics, detectors) and the first reflectivity measurements. Those measurements are compared those realized at LURE, using synchrotron radiation provided by SUPER ACO storage ring, and to a theoretical simulation
Multicenter validation of the VITEK MS v2.0 MALDI-TOF mass spectrometry system for the identification of fastidious gram-negative bacteria.

Science.gov (United States)

Branda, John A; Rychert, Jenna; Burnham, Carey-Ann D; Bythrow, Maureen; Garner, Omai B; Ginocchio, Christine C; Jennemann, Rebecca; Lewinski, Michael A; Manji, Ryhana; Mochon, A Brian; Procop, Gary W; Richter, Sandra S; Sercia, Linda F; Westblade, Lars F; Ferraro, Mary Jane

2014-02-01

The VITEK MS v2.0 MALDI-TOF mass spectrometry system's performance in identifying fastidious gram-negative bacteria was evaluated in a multicenter study. Compared with the reference method (DNA sequencing), the VITEK MS system provided an accurate, species-level identification for 96% of 226 isolates; an additional 1% were accurately identified to the genus level. © 2013.
The contributions of numerical acuity and non-numerical stimulus features to the development of the number sense and symbolic math achievement.

Science.gov (United States)

Starr, Ariel; DeWind, Nicholas K; Brannon, Elizabeth M

2017-11-01

Numerical acuity, frequently measured by a Weber fraction derived from nonsymbolic numerical comparison judgments, has been shown to be predictive of mathematical ability. However, recent findings suggest that stimulus controls in these tasks are often insufficiently implemented, and the proposal has been made that alternative visual features or inhibitory control capacities may actually explain this relation. Here, we use a novel mathematical algorithm to parse the relative influence of numerosity from other visual features in nonsymbolic numerical discrimination and to examine the strength of the relations between each of these variables, including inhibitory control, and mathematical ability. We examined these questions developmentally by testing 4-year-old children, 6-year-old children, and adults with a nonsymbolic numerical comparison task, a symbolic math assessment, and a test of inhibitory control. We found that the influence of non-numerical features decreased significantly over development but that numerosity was a primary determinate of decision making at all ages. In addition, numerical acuity was a stronger predictor of math achievement than either non-numerical bias or inhibitory control in children. These results suggest that the ability to selectively attend to number contributes to the maturation of the number sense and that numerical acuity, independent of inhibitory control, contributes to math achievement in early childhood. Copyright © 2017 Elsevier B.V. All rights reserved.

Gas Chromatograph Method Optimization Trade Study for RESOLVE: 20-meter Column v. 8-meter Column

Science.gov (United States)

Huz, Kateryna

2014-01-01

RESOLVE is the payload on a Class D mission, Resource Prospector, which will prospect for water and other volatile resources at a lunar pole. The RESOLVE payload's primary scientific purpose includes determining the presence of water on the moon in the lunar regolith. In order to detect the water, a gas chromatograph (GC) will be used in conjunction with a mass spectrometer (MS). The goal of the experiment was to compare two GC column lengths and recommend which would be best for RESOLVE's purposes. Throughout the experiment, an Inficon Fusion GC and an Inficon Micro GC 3000 were used. The Fusion had a 20m long column with 0.25mm internal diameter (Id). The Micro GC 3000 had an 8m long column with a 0.32mm Id. By varying the column temperature and column pressure while holding all other parameters constant, the ideal conditions for testing with each column length in their individual instrument configurations were determined. The criteria used for determining the optimal method parameters included (in no particular order) (1) quickest run time, (2) peak sharpness, and (3) peak separation. After testing numerous combinations of temperature and pressure, the parameters for each column length that resulted in the most optimal data given my three criteria were selected. The ideal temperature and pressure for the 20m column were 95 C and 50psig. At this temperature and pressure, the peaks were separated and the retention times were shorter compared to other combinations. The Inficon Micro GC 3000 operated better at lower temperature mainly due to the shorter 8m column. The optimal column temperature and pressure were 70 C and 30psig. The Inficon Micro GC 3000 8m column had worse separation than the Inficon Fusion 20m column, but was able to separate water within a shorter run time. Therefore, the most significant tradeoff between the two column lengths was peak separation of the sample versus run time. After performing several tests, it was concluded that better
THE HIGH-ENERGY EMISSION OF THE CRAB NEBULA FROM 20 keV TO 6 MeV WITH INTEGRAL SPI

International Nuclear Information System (INIS)

Jourdain, E.; Roques, J. P.

2009-01-01

The SPI spectrometer aboard the International Gamma-Ray Astrophysics Laboratory mission regularly observes the Crab Nebula since 2003. We report on observations distributed over 5.5 years and investigate the variability of the intensity and spectral shape of this remarkable source in the hard X-rays domain up to a few MeV. While single power-law models give a good description in the X-ray domain (mean photon index ∼ 2.05) and MeV domain (photon index ∼ 2.23), crucial information is contained in the evolution of the slope with energy between these two values. This study has been carried out through individual observations and long duration (∼ 400 ks) averaged spectra. The stability of the emission is remarkable and excludes a single power-law model. The slopes measured below and above 100 keV agree perfectly with the last values reported in the X-ray and MeV regions, respectively, but without indication of a localized break point. This suggests a gradual softening in the emission around 100 keV and thus a continuous evolution rather than an actual change in the mechanism parameters. In the MeV region, no significant deviation from the proposed power-law model is visible up to 5-6 MeV. Finally, we take advantage of the spectroscopic capability of the instrument to seek for previously reported spectral features in the covered energy range with negative results for any significant cyclotron or annihilation emission on 400 ks timescales. Beyond the scientific results, the performance and reliability of the SPI instrument is explicitly demonstrated, with some details about the most appropriate analysis method.
Color-Space-Based Visual-MIMO for V2X Communication

Directory of Open Access Journals (Sweden)

Jai-Eun Kim

2016-04-01

Full Text Available In this paper, we analyze the applicability of color-space-based, color-independent visual-MIMO for V2X. We aim to achieve a visual-MIMO scheme that can maintain the original color and brightness while performing seamless communication. We consider two scenarios of GCM based visual-MIMO for V2X. One is a multipath transmission using visual-MIMO networking and the other is multi-node V2X communication. In the scenario of multipath transmission, we analyze the channel capacity numerically and we illustrate the significance of networking information such as distance, reference color (symbol, and multiplexing-diversity mode transitions. In addition, in the V2X scenario of multiple access, we may achieve the simultaneous multiple access communication without node interferences by dividing the communication area using image processing. Finally, through numerical simulation, we show the superior SER performance of the visual-MIMO scheme compared with LED-PD communication and show the numerical result of the GCM based visual-MIMO channel capacity versus distance.
Fluence-to-effective dose conversion coefficients from a Saudi population based phantom for monoenergetic photon beams from 10 keV to 20 MeV

International Nuclear Information System (INIS)

Ma, Andy K; Hussein, Mohammed Adel; Altaher, Khalid Mohammed; Farid, Khalid Yousif; Amer, Mamun; Aldhafery, Bander Fuhaid; Alghamdi, Ali A

2015-01-01

Fluence-to-dose conversion coefficients are important quantities for radiation protection, derived from Monte Carlo simulations of the radiation particles through a stylised phantom or voxel based phantoms. The voxel phantoms have been developed for many ethnic groups for their accurate reflection of the anatomy. In this study, we used the Monte Carlo code MCNPX to calculate the photon fluence-to-effective dose conversion coefficients with a voxel phantom based on the Saudi Arabian male population. Six irradiation geometries, anterior–posterior (AP), posterior–anterior (PA), left lateral (LLAT), right lateral (RLAT), rotational (ROT) and isotropic (ISO) were simulated for monoenergetic photon beams from 10 keV to 20 MeV. We compared the coefficients with the reference values in ICRP Publication 116. The coefficients in the AP and PA geometries match the reference values to 9% and 12% on average as measured by root mean square while those in the LLAT, RLAT ROT and ISO geometries differ, mostly below, from the reference by 23, 22, 15 and 16%, respectively. The torso of the Saudi phantom is wider than the ICRP reference male phantom and likely to cause more attenuation to the lateral beam. The ICRP reference coefficients serve well for the Saudi male population as conservative estimations for the purpose of radiation protection. (paper)
Neutron-rich rare isotope production from projectile fission of heavy beams in the energy range of 20 MeV/nucleon

OpenAIRE

Vonta, N.; Souliotis, G. A.; Loveland, W. D.; Kwon, Y. K.; Tshoo, K.; Jeong, S. C.; Veselsky, M.; Bonasera, A.; Botvina, A.

2016-01-01

We investigate the possibilities of producing neutron-rich nuclides in projectile fission of heavy beams in the energy range of 20 MeV/nucleon expected from low-energy facilities. We report our efforts to theoretically describe the reaction mechanism of projectile fission following a multinucleon transfer collision at this energy range. Our calculations are mainly based on a two-step approach: the dynamical stage of the collision is described with either the phenomenological Deep-Inelastic Tr...
Psychometrics of the Short Form 36 Health Survey version 2 (SF-36v2) and the Quality of Life Scale for Drug Addicts (QOL-DAv2.0) in Chinese mainland patients with methadone maintenance treatment.

Science.gov (United States)

Zhou, Kaina; Zhuang, Guihua; Zhang, Hongmei; Liang, Peifeng; Yin, Juan; Kou, Lingling; Hao, Mengmeng; You, Lijuan

2013-01-01

To test psychometrics of the Short Form 36 Health Survey version 2 (SF-36v2) and the Quality of Life Scale for Drug Addicts (QOL-DAv2.0) in Chinese mainland patients with methadone maintenance treatment (MMT). A total of 1,212 patients were recruited from two MMT clinics in Xi'an, China. Reliability was estimated with Cronbach's α and intra-class correlation (ICC). Convergent and discriminant validity was assessed using multitrait-multimethod correlation matrix. Sensitivity was measured with ANOVA and relative efficiency. Responsiveness was evaluated by pre-post paired-samples t-test and standardized response mean based on the patients' health status changes following 6-month period. Cronbach's α of the SF-36v2 physical and mental summary components were 0.80 and 0.86 (eight scales range 0.73-0.92) and the QOL-DAv2.0 was 0.96 (four scales range: 0.80-0.93). ICC of the SF-36v2 two components were 0.86 and 0.85 (eight scales range: 0.72-0.87) and the QOL-DAv2.0 was 0.94 (four scales range: 0.88-0.92). Convergent validity was lower between the two instruments (γ <0.70) while discriminant validity was acceptable within each instrument. Sensitivity was satisfied in self-evaluated health status (both instruments) and average daily methadone dose (SF-36v2 physical functioning and vitality scales; QOL-DAv2.0 except psychology scale). Responsiveness was acceptable in the improved health status change (SF-36v2 except vitality scale; QOL-DAv2.0 except psychology and symptoms scales) and deteriorated health status change (SF-36v2 except vitality, social functioning and mental health scales; QOL-DAv2.0 except society scale). The SF-36v2 and the QOL-DAv2.0 are valid tools and can be used independently or complementary according to different emphases of health-related quality of life evaluation in patients with MMT.
Psychometrics of the Short Form 36 Health Survey version 2 (SF-36v2 and the Quality of Life Scale for Drug Addicts (QOL-DAv2.0 in Chinese mainland patients with methadone maintenance treatment.

Directory of Open Access Journals (Sweden)

Kaina Zhou

Full Text Available OBJECTIVE: To test psychometrics of the Short Form 36 Health Survey version 2 (SF-36v2 and the Quality of Life Scale for Drug Addicts (QOL-DAv2.0 in Chinese mainland patients with methadone maintenance treatment (MMT. METHODS: A total of 1,212 patients were recruited from two MMT clinics in Xi'an, China. Reliability was estimated with Cronbach's α and intra-class correlation (ICC. Convergent and discriminant validity was assessed using multitrait-multimethod correlation matrix. Sensitivity was measured with ANOVA and relative efficiency. Responsiveness was evaluated by pre-post paired-samples t-test and standardized response mean based on the patients' health status changes following 6-month period. RESULTS: Cronbach's α of the SF-36v2 physical and mental summary components were 0.80 and 0.86 (eight scales range 0.73-0.92 and the QOL-DAv2.0 was 0.96 (four scales range: 0.80-0.93. ICC of the SF-36v2 two components were 0.86 and 0.85 (eight scales range: 0.72-0.87 and the QOL-DAv2.0 was 0.94 (four scales range: 0.88-0.92. Convergent validity was lower between the two instruments (γ <0.70 while discriminant validity was acceptable within each instrument. Sensitivity was satisfied in self-evaluated health status (both instruments and average daily methadone dose (SF-36v2 physical functioning and vitality scales; QOL-DAv2.0 except psychology scale. Responsiveness was acceptable in the improved health status change (SF-36v2 except vitality scale; QOL-DAv2.0 except psychology and symptoms scales and deteriorated health status change (SF-36v2 except vitality, social functioning and mental health scales; QOL-DAv2.0 except society scale. CONCLUSIONS: The SF-36v2 and the QOL-DAv2.0 are valid tools and can be used independently or complementary according to different emphases of health-related quality of life evaluation in patients with MMT.
A Microdose PET Study of the Safety, Immunogenicity, Biodistribution, and Radiation Dosimetry of 18F-FB-A20FMDV2 for Imaging the Integrin αvβ6.

Science.gov (United States)

Keat, Nicholas; Kenny, Julia; Chen, Keguan; Onega, Mayca; Garman, Nadia; Slack, Robert J; Parker, Christine A; Lumbers, R Thomas; Hallett, Will; Saleem, Azeem; Passchier, Jan; Lukey, Pauline T

2018-06-01

The α v β 6 integrin is involved in the pathogenesis of cancer and fibrosis. A radiolabeled 20-amino-acid α v β 6 -binding peptide, derived from the foot and mouth virus (NAVPNLRGDLQVLAQKVART [A20FMDV2]), has been developed to image α v β 6 levels preclinically. This study was designed to translate these findings into a clinical PET imaging protocol to measure the expression of α v β 6 in humans. Methods: Preclinical toxicology was undertaken, and a direct immunoassay was developed for 4-fluorobenzamide (FB)-A20FMDV2. Four healthy human subjects (2 male and 2 female) received a single microdose of 18 F-FB-A20FMDV2 followed by a multibed PET scan of the whole body over more than 3 h. Results: There were no findings in the preclinical toxicology assessments, and no anti-A20FMDV2 antibodies were detected before or after dosing with the PET ligand. The mean and SD of the administered mass of 18 F-FB-A20FMDV2 was 8.7 ± 4.4 μg (range, 2.7-13.0 μg). The mean administered activity was 124 ± 20 MBq (range, 98-145 MBq). There were no adverse or clinically detectable pharmacologic effects in any of the subjects. No significant changes in vital signs, laboratory study results, or electrocardiography results were observed. Uptake of radioactivity was observed in the thyroid, salivary glands, liver, stomach wall, spleen, kidneys, ureters, and bladder. Time-activity curves indicated that the highest activity was in the bladder content, followed by the kidneys, small intestine, stomach, liver, spleen, thyroid, and gallbladder. The largest component of the residence times was the voided urine, followed by muscle, bladder, and liver. Using the mean residence time over all subjects as input to OLINDA/EXM, the effective dose was determined to be 0.0217 mSv/MBq; using residence times from single subjects gave an SD of 0.0020 mSv/MBq from the mean. The critical organ was the urinary bladder, with an absorbed dose of 0.18 mGy/MBq. Conclusion: 18 F-FB-A20FMDV2 successfully
Tensorial analyzing power T20 at 1800C.M. in d vector p elastic scattering between 0.3 and 2.3 GeV

International Nuclear Information System (INIS)

Gaillard, G.

1984-01-01

The results of the measurement of the analysing power T 20 at 180 0 CM in d vector p elastic scattering for 16 energies between 300 and 2300 MeV are presented. The values which have been obtained are badly reproduced by the calculations based on neutron transfer (ONT) and Δ excitation in the intermediate state (TME) mechanisms, principal beyond 1 GeV. The excitation of possible tribaryon resonances, which are introduced in an elementary way, is added to these two mechanisms. The results of these calculations show that one could thus obtain a satisfying agreement with the experimental values. A measurement of angular distribution of the analysing powers Asub(y) and Asub(yy) between 70 and 180 0 CM at 1200 MeV is also presented [fr
Behavioral modeling of SRIM tables for numerical simulation

Energy Technology Data Exchange (ETDEWEB)

Martinie, S., E-mail: sebastien.martinie@cea.fr; Saad-Saoud, T.; Moindjie, S.; Munteanu, D.; Autran, J.L., E-mail: jean-luc.autran@univ-amu.fr

2014-03-01

Highlights: • Behavioral modeling of SRIM data is performed on the basis of power polynomial fitting functions. • Fast and continuous numerical functions are proposed for the stopping power and projected range. • Functions have been successfully tested for a wide variety of ions and targets. • Typical accuracies below the percent have been obtained in the range 1 keV–1 GeV. - Abstract: This work describes a simple way to implement SRIM stopping power and range tabulated data in the form of fast and continuous numerical functions for intensive simulation. We provide here the methodology of this behavioral modeling as well as the details of the implementation and some numerical examples for ions in silicon target. Developed functions have been successfully tested and used for the simulation of soft errors in microelectronics circuits.
Behavioral modeling of SRIM tables for numerical simulation

International Nuclear Information System (INIS)

Martinie, S.; Saad-Saoud, T.; Moindjie, S.; Munteanu, D.; Autran, J.L.

2014-01-01

Highlights: • Behavioral modeling of SRIM data is performed on the basis of power polynomial fitting functions. • Fast and continuous numerical functions are proposed for the stopping power and projected range. • Functions have been successfully tested for a wide variety of ions and targets. • Typical accuracies below the percent have been obtained in the range 1 keV–1 GeV. - Abstract: This work describes a simple way to implement SRIM stopping power and range tabulated data in the form of fast and continuous numerical functions for intensive simulation. We provide here the methodology of this behavioral modeling as well as the details of the implementation and some numerical examples for ions in silicon target. Developed functions have been successfully tested and used for the simulation of soft errors in microelectronics circuits
Code Verification Capabilities and Assessments in Support of ASC V&V Level 2 Milestone #6035

Energy Technology Data Exchange (ETDEWEB)

Doebling, Scott William [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Budzien, Joanne Louise [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ferguson, Jim Michael [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Harwell, Megan Louise [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hickmann, Kyle Scott [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Israel, Daniel M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Magrogan, William Richard III [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Singleton, Jr., Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Srinivasan, Gowri [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Walter, Jr, John William [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Woods, Charles Nathan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-09-26

This document provides a summary of the code verification activities supporting the FY17 Level 2 V&V milestone entitled “Deliver a Capability for V&V Assessments of Code Implementations of Physics Models and Numerical Algorithms in Support of Future Predictive Capability Framework Pegposts.” The physics validation activities supporting this milestone are documented separately. The objectives of this portion of the milestone are: 1) Develop software tools to support code verification analysis; 2) Document standard definitions of code verification test problems; and 3) Perform code verification assessments (focusing on error behavior of algorithms). This report and a set of additional standalone documents serve as the compilation of results demonstrating accomplishment of these objectives.
D-, O- and OD- desorption induced by low-energy (0-20 eV) electron impact on amorphous D2O films

International Nuclear Information System (INIS)

Pan Xiaoning; Abdoul-Carime, Hassan; Cloutier, Pierre; Bass, Andrew D.; Sanche, Leon

2005-01-01

We report measurements of low-energy electron stimulated desorption of D - , O - and OD - anions from multilayer amorphous D 2 O films physisorbed on a Pt substrate. The 0-20 eV incident energy dependence (i.e., the yield function) of the desorbed D - yield reveals the presence of a strong peak located at 7.2 eV with a shoulder near 9 eV, which are due to dissociation of the transient states 2 B 1 and 2 A 1 of D 2 O, respectively. The O - and OD - yield functions each exhibit a single broad structure between 5 and 12 eV which also result from dissociative electron attachment (DEA). Due to the weakness of the O - and OD - signals, three possible processes involving DEA must be considered to explain their yield functions, i.e., direct DEA, reactive scattering and DEA to a new product in the film synthesized by the electron beam. It is concluded that at large electron doses (>7.5x10 14 electrons/cm 2 ), these broad peaks arise from DEA to a new product, whereas at lower dose the possibility of direct DEA (i.e., e - +D 2 O→D 2 O - →O - +D 2 and OD - +D) cannot be entirely discounted. Above 15 eV, all anion yield functions exhibit a monotonic rise due to direct dipolar dissociation
Determination of the 20 MeV linear accelerator, new injector for the synchrotron Saturne. Choice of the electrical and dynamical particle parameters

International Nuclear Information System (INIS)

Prome, M.

1968-12-01

This report takes place in the general determination of the 20 MeV linear accelerator which will be the new Saturne injector; it deals with particle dynamics. Starting from beam requirements at the output of the linac, cells lengths with variable synchronous phase angle, buncher and de-buncher parameters, beam emittances at the output in several phase spaces are successively determined. (author) [fr
Coherent Bremsstrahlung, Coherent Pair Production, Birefringence and Polarimetry in the 20-170 GeV energy range using aligned crystals

CERN Document Server

Apyan, A; Badelek, B; Ballestrero, S; Biino, C; Birol, I; Cenci, P; Connell, S H; Eichblatt, S; Fonseca, T; Freund, A; Gorini, B; Groess, R; Ispirian, K; Ketel, T; Kononets, Y V; López, A; Mangiarotti, A; Sellschop, J P Friedel; Shieh, M; Sona, P; Strakhovenko, V M; Uggerhøj, U; Uggerhøj, Erik; Van Rens, B; Velasco, M; Vilakazi, Z Z; Wessely, O; Ünel, G; Kononets, Yu V

2008-01-01

The processes of coherent bremsstrahlung (CB) and coherent pair production (CPP) based on aligned crystal targets have been studied in the energy range 20-170 GeV. The experimental arrangement allowed these phenomena as well as their polarization dependence to be evaluated under conditions where single-photon cross-sections could be measured. This proved very important as the theoretical description of CB and CPP is an area of active theoretical debate and development. The theoretical approach used in this paper predicts both the cross sections and polarization observables very well for the experimental conditions investigated, indicating that the understanding of CB and CPP is reliable up to energies of 170 GeV. A birefringence effect in CPP was studied and it was demonstrated this enabled new technologies for high energy photon beam optics, such as polarimeters (for both linear and circular polarization) and phase plates. We also present new results regarding the features of coherent high energy photon emis...
Simulation of ultra-high energy photon propagation with PRESHOWER 2.0

Science.gov (United States)

Homola, P.; Engel, R.; Pysz, A.; Wilczyński, H.

2013-05-01

In this paper we describe a new release of the PRESHOWER program, a tool for Monte Carlo simulation of propagation of ultra-high energy photons in the magnetic field of the Earth. The PRESHOWER program is designed to calculate magnetic pair production and bremsstrahlung and should be used together with other programs to simulate extensive air showers induced by photons. The main new features of the PRESHOWER code include a much faster algorithm applied in the procedures of simulating the processes of gamma conversion and bremsstrahlung, update of the geomagnetic field model, and a minor correction. The new simulation procedure increases the flexibility of the code so that it can also be applied to other magnetic field configurations such as, for example, encountered in the vicinity of the sun or neutron stars. Program summaryProgram title: PRESHOWER 2.0 Catalog identifier: ADWG_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADWG_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 3968 No. of bytes in distributed program, including test data, etc.: 37198 Distribution format: tar.gz Programming language: C, FORTRAN 77. Computer: Intel-Pentium based PC. Operating system: Linux or Unix. RAM:probability of the process expected to occur. The new algorithm reduces significantly the number of tracking steps and speeds up the execution of the program. The geomagnetic field model has been updated to IGRF-11, allowing for interpolations up to the year 2015. Numerical Recipes procedures to calculate modified Bessel functions have been replaced with an open source CERN routine DBSKA. One minor bug has been fixed. Restrictions: Gamma conversion into particles other than an electron pair is not considered. Spatial structure of the cascade is neglected. Additional comments
Numerical Procedure for Optimizing Dye-Sensitized Solar Cells

Directory of Open Access Journals (Sweden)

Mihai Razvan Mitroi

2014-01-01

Full Text Available We propose a numerical procedure consisting of a simplified physical model and a numerical method with the aim of optimizing the performance parameters of dye-sensitized solar cells (DSSCs. We calculate the real rate of absorbed photons (in the dye spectral range Grealx by introducing a factor β<1 in order to simplify the light absorption and reflection on TCO electrode. We consider the electrical transport to be purely diffusive and the recombination process only to occur between electrons from the TiO2 conduction band and anions from the electrolyte. The used numerical method permits solving the system of differential equations resulting from the physical model. We apply the proposed numerical procedure on a classical DSSC based on Ruthenium dye in order to validate it. For this, we simulate the J-V characteristics and calculate the main parameters: short-circuit current density Jsc, open circuit voltage Voc, fill factor FF, and power conversion efficiency η. We analyze the influence of the nature of semiconductor (TiO2 and dye and also the influence of different technological parameters on the performance parameters of DSSCs. The obtained results show that the proposed numerical procedure is suitable for developing a numerical simulation platform for improving the DSSCs performance by choosing the optimal parameters.
2 MeV/20 kW industrial electron beam accelerator vis-s-vis its vacuum system

International Nuclear Information System (INIS)

Khader, S.A.; Assadullah, M.; Sarma, K.S.S.; Bandi, L.N.

2003-01-01

Full text: Electron beam accelerators in the energy range 200 keV to 10 MeV have been extensively used for many radiation processing applications that include polymerization, polymer modifications, radiation sterilization, food irradiation and gem coloration. The accelerator technology is a multidisciplinary one wherein production of stable vacuum in various accelerator systems is of utmost importance to achieve required output beam parameters like beam energy and current for processing industrial products at large through puts on continuous basis. A 2 MeV, 20 kW industrial electron beam accelerator has been in operation since 2001 at BARC-BRIT complex, Navi Mumbai for commercial and R and D applications like crosslinking of wire and cables, heat shrinkable tubes, PE O rings, PTEE degradation and color enhancement in diamonds. The machine is a ILU-6 type pulse RF accelerator consisting of a single resonator copper cavity of 1.2 m diameter and 1.2 m height (volume:∼ 1.5 m3) placed inside a stainless steel container (called cavity container) and a s.s. beam extraction window wherein vacuum needs to be maintained at a minimum 10-6 torr. Four sputter ion pumps are directly fixed on the cavity container to obtain maximum pumping efficiency. The fore vacuum is generated using a combination rotary and a roots pump. The beam extraction widow has a 50 and 956 m thick titanium foil acting as the exit window for electrons from the vacuum into air. Both the cavity and the beam extraction window are coupled through a gate valve which acts as a vacuum separator isolating the systems from each other during foil puncture, scanning system failure or any other related problems. This paper reports details of the vacuum system, measurements, vacuum leaks and detection and the operational experience related to maintenance and troubleshooting exercises that have been carried in the accelerator
RELATIVISTIC (E > 0.6, > 2.0, AND > 4.0 MeV) ELECTRON ACCELERATION AT GEOSYNCHRONOUS ORBIT DURING HIGH-INTENSITY, LONG-DURATION, CONTINUOUS AE ACTIVITY (HILDCAA) EVENTS

International Nuclear Information System (INIS)

Hajra, Rajkumar; Echer, Ezequiel; Gonzalez, Walter D.; Tsurutani, Bruce T.; Santolik, Ondrej

2015-01-01

Radiation-belt relativistic (E > 0.6, > 2.0, and > 4.0 MeV) electron acceleration is studied for solar cycle 23 (1995-2008). High-intensity, long-duration, continuous AE activity (HILDCAA) events are considered as the basis of the analyses. All of the 35 HILDCAA events under study were found to be characterized by flux enhancements of magnetospheric relativistic electrons of all three energies compared to the pre-event flux levels. For the E > 2.0 MeV electron fluxes, enhancement of >50% occurred during 100% of HILDCAAs. Cluster-4 passes were examined for electromagnetic chorus waves in the 5 < L < 10 and 0 < MLT < 12 region when wave data were available. Fully 100% of these HILDCAA cases were associated with enhanced whistler-mode chorus waves. The enhancements of E > 0.6, > 2.0, and > 4.0 MeV electrons occurred ∼1.0 day, ∼1.5 days, and ∼2.5 days after the statistical HILDCAA onset, respectively. The statistical acceleration rates for the three energy ranges were ∼1.8 × 10 5 , 2.2 × 10 3 , and 1.0 × 10 1 cm –2 s –1 sr –1 d –1 , respectively. The relativistic electron-decay timescales were determined to be ∼7.7, 5.5, and 4.0 days for the three energy ranges, respectively. The HILDCAAs were divided into short-duration (D ≤ 3 days) and long-duration (D > 3 days) events to study the dependence of relativistic electron variation on HILDCAA duration. For long-duration events, the flux enhancements during HILDCAAs with respect to pre-event fluxes were ∼290%, 520%, and 82% for E > 0.6, > 2.0, and > 4.0 MeV electrons, respectively. The enhancements were ∼250%, 400%, and 27% respectively, for short-duration events. The results are discussed with respect to the current understanding of radiation-belt dynamics
25 CFR 36.20 - Standard V-Minimum academic programs/school calendar.

Science.gov (United States)

2010-04-01

..., physical education, music, etc.) which are directly related to or affect student instruction shall provide....20 Section 36.20 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY...

A study of two photon production of two-body final states with invariant mass greater than 2.0 GeV

International Nuclear Information System (INIS)

Berger, C.; Genzel, H.; Grigull, R.; Lackas, W.; Raupach, F.; Wagner, W.; Ackermann, H.; Alexander, G.

1982-02-01

We have measured the electron, muon, and charged-hadron pair production rates in two-photon interactions for invariant masses above 2.0 GeV over a large range of momentum transfers. The cross sections for electron and muon pairs show good agreement with the QED predictions at both small and large momentum transfers. The observed rate of hadron production is less than 6% of the rate that QED predicts for point-like hadrons, consistent with recent leading-order QCD calculations. (orig.)
V zajetí Gutenbergova syndromu: Metodologické aspekty vizuálních stimulů v sociálně vědním výzkumu

Czech Academy of Sciences Publication Activity Database

Buchtík, Martin

2015-01-01

Roč. 13, č. 1 (2015), s. 13-22 ISSN 1214-438X R&D Projects: GA ČR GA13-10320S Institutional support: RVO:68378025 Keywords : visual research * methodology * visual stimuli Subject RIV: AO - Sociology, Demography http://cvvm.soc.cas.cz/ media /com_form2content/documents/c3/a7405/f11/NS15-1_V%20zajeti%20Gutenbergova%20syndromu.pdf
Surface temperature measurements for ion-bombarded Si and GaAs at 1.0 to 2.0 MeV

International Nuclear Information System (INIS)

Lowe, L.F.; Kennedy, J.K.; Davies, D.E.; Deane, M.L.; Eyges, L.J.

1975-01-01

Surface temperatures of ion-bombarded silicon and gallium arsenide have been measured using an infrared detector. Ion beams of N + , N + 2 , O + , O + 2 , C + , CO + , and H + were used at energies from 1--2.0 MeV and at current densities up to 12 μAcenter-dotcm/sup -2/. No temperature dependence was found on ion species, energy, or current. The change in temperature depended only on beam power, target material, and sample mounting technique. With proper mounting temperature increases of 20 degreeC for silicon and 65 degreeC for gallium arsenide were observed for a beam power density of 1.0 Wcenter-dotcm/sup -2/
Study of one-nucleon transfer reactions with polarized deuterons of 20 MeV

International Nuclear Information System (INIS)

Seichert, N.

1983-01-01

In this thesis the results of the study of (d vector,p), (d vector,t), and (d vector, 3 He) reactions at Esub(d)approx.=20 MeV on the target nuclei 16 O, 18 O, 28 Si, 36 Ar, 40 Ca, 48 Ca, 54 Cr, 65 Cu, 90 Zr, 144 Sm, and 208 Pb in the framework of a DWBA analysis are presented. The collection of the results of the analysis over this wide mass range shall permit a survey, how well the conventional DWBA describes the measured angular distributions of dsigma/dΩ(theta) and iT 11 (theta). Furthermore in justified cases the contribution of higher order processes (inelastic transfer) are studied by means of a CCBA analysis. The spectroscopical possibilities given by the measurement of the analyzing power iT 11 (theta) are presented in detail on the example of the reaction 144 Sm (d vector,p) 145 Sm. The analysis of the tensor analyzing power T 21 (theta) in the framework of a finite range DWBA in the last part of the thesis permits quantitative statements about the D state amplitude in the relative wave function of the deuteron, the triton, and of 3 He. (orig./HSI) [de
Ionization chamber with build-up cup spectral sensitivity to megavoltage (0.5-20 MeV) photon fluences in free air

International Nuclear Information System (INIS)

Gorlachev, G.E.

2002-01-01

In-air measurements of photon beam properties, used in radiation therapy, is common practice for determining radiation output dependence from the field size, known as head scatter factors (HSF). PMMA and brass build-up caps are most popular miniphantoms for providing electron equilibrium. Discrepancies up to 2% in HSF measurements by different combinations of detectors and equilibrium caps have been published. One of the main reasons of those discrepancies is the detector system spectral sensitivity and differences in primary and scatter radiation spectra. In the light of new model based dose calculation methods direct radiation fluence measurement is of great interest. So, understanding of detector spectral sensitivity is important task for modern dosimetry of radiation therapy. In the present study Monte Carlo (MC) method was employed to calculate ionization chamber response to monoenergetic photon fluences, normalized to water kerma units. Simulation was done using EGS4 package. Electron transport was performed with ESTEPE equal to 4%. PEGS cross sections were generated for maximal energy 20 MeV with cutoff kinetic energy 10 KeV both for photons and electrons. Scanditronix RK-05 ionization chamber was chosen as a prototype. Eight cylindrical miniphantoms, representing four materials (PMMA, Al, Cu, Pb) and two front wall thickness, were simulated. Results are presented. Miniphantom front wall thicknesses in each case are shown in the figure. Diameter depends on the material and equal respectively: PMMA - 4, Al - 2.5, Cu - 1.5, and PB - 1.5 cm. Ionization chamber outer diameter is equal to 0.7 cm. Detector sensitivity has considerable energy dependence. Two effects explain it. First is the radiation attenuation in the miniphantom. Second is pair production, which dominates in high atomic number miniphantoms for energies above 5 MeV. Depending on the miniphantom material detector response changes from 1.5 to 5 times in the energy range from 0.5 to 20 MeV. Correct
Cross-sections of 45Sc(n,2n)44m,gSc reaction from the reaction threshold to 20 MeV

International Nuclear Information System (INIS)

Luo, J.; Peking Univ., Beijing; Liu, R.; Jiang, L.; Liu, Z.; Sun, G.; Ge, S.

2013-01-01

Cross sections of 45 Sc(n,2n) 44m,g Sc reactions and their isomeric cross section ratios σ m /σ g have been measured at three neutron energies between 13.5 and 14.8 MeV using the activation technique. The pure cross section of the groundstate was then obtained by utilizing the absolute cross section of the metastable state and analysis methods of residual nuclear decay. The monoenergetic neutron beam was produced via the 3 H(d, n) 4 He reaction. The cross sections were also estimated with the TALYS-1.2 nuclear model code using different level density options, at neutron energies varying from the reaction threshold to 20 MeV. Results are also discussed and compared with some corresponding values found in the literature. (orig.)
Color-Space-Based Visual-MIMO for V2X Communication †

Science.gov (United States)

Kim, Jai-Eun; Kim, Ji-Won; Park, Youngil; Kim, Ki-Doo

2016-01-01

In this paper, we analyze the applicability of color-space-based, color-independent visual-MIMO for V2X. We aim to achieve a visual-MIMO scheme that can maintain the original color and brightness while performing seamless communication. We consider two scenarios of GCM based visual-MIMO for V2X. One is a multipath transmission using visual-MIMO networking and the other is multi-node V2X communication. In the scenario of multipath transmission, we analyze the channel capacity numerically and we illustrate the significance of networking information such as distance, reference color (symbol), and multiplexing-diversity mode transitions. In addition, in the V2X scenario of multiple access, we may achieve the simultaneous multiple access communication without node interferences by dividing the communication area using image processing. Finally, through numerical simulation, we show the superior SER performance of the visual-MIMO scheme compared with LED-PD communication and show the numerical result of the GCM based visual-MIMO channel capacity versus distance. PMID:27120603
Towards a dynamical description of intermediate mass fragment formation in heavy-ion collisions at some tens of MeV/A

International Nuclear Information System (INIS)

Suraud, E.

1990-01-01

We briefly remind the possible dynamical scenario of fragments formation in central heavy-ion collisions at some tens of MeV/A. We discuss how present day dynamical models can describe fragment formation. We show that particle methods provide a reasonable solution of Boltzman-like equations. We next turn to the Boltzmann-Langevin formalism which gives a well defined framework for the understanding of Intermediate Mass Fragments formation. We present a first numerical solution of this equation and show the importance of fluctuations in the dynamics of the collision. We finally apply the formalism to the onset of multifragmentation in the 40 Ca + 40 Ca system between 20 and 60 MeV/A beam energy
The electron beam characteristics of energies up to 20 MeV and comparison of electron parameters of linear accelerators

International Nuclear Information System (INIS)

Awada, M.; Elleithy, M.A.; ElWihady, G.F.; Mostafa, K.A.

2005-01-01

The electron beams characteristics studded for the energies 4-20 MeV of Varian 23 EX ,experimental results are presented and compared with the published data. The CADD curves are measured for all energies and carried out the PDD of different applicator sizes ,that compared with the PDD of in the BJR. The quality beam parameters are determined from the CADD curves and calculated the yielded parameters of the corresponding electron energies which compared with the published data of other accelerators and theoretical Monte-Carlo calculation. The beam profiles are measured at different depths to construct the isodose distribution
Hydrostatic pressure, water temperature, and others collected from R/V Pelican in Gulf of Mexico from 2012-11-28 to 2012-12-20 (NCEI Accession 0156587)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data was collected during the GISR G03 cruise aboard R/V Pelican held from 28 November to 20 December 2012. This data set includes vertical profiles of...
Elastic scattering of deuterons from hydrogen at 2.0, 1.6 and 1.2 GeV, and search for critical opalescence in inelastic scattering of proton from carbon-12 at 800 MeV

International Nuclear Information System (INIS)

Haji-Saeid, S.M.

1980-01-01

Large deuteron vector and tensor asymmetries have been measured for the first time at intermediate energies. The polarized deuteron beam whose tensor and vector components were 0.75 and 0.25, respectively, were used at energies of 2.0, 1.6 and 1.2 GeV. The tensor and vector quantities Pyy and Py were extracted from the data obtained within beam polarization normal to the scattering plane, and Pxx was obtained when the polarization was precessed into the scattering plane. Analysis of the data using multiple scattering theory demonstrates the importance of the non-eikonal correction to the Glauber Model and also the sensitivity of the data to double-spin flip components of the NN amplitudes. In another experiment the differential cross section for the 12C(P,P')12C*(15.11 MeV, 1 + T = 1) reaction has been measured at 800 MeV; the range of the angular distribution corresponds to momentum transfers of 0.7 to 2.4 fm -1 (1 to 3.3 mπ). The cross section decreases almost exponentially at large angles; no maximum is observed in the region where nuclear critical opalescence might be expected. The cross sections which measured in parallel to the 15.11 MeV state were for the levels at 11.83 (2 - ), 12.71 (1 + ), 13.35 (2 - ), 16.1 (2 + ) and 16.58 (2 - ) MeV
Proposal for the Award of a Contract for the Supply of 13 kA and 20.5 kA, 18 V Switched-Mode Power Converters for the LHC

CERN Document Server

2003-01-01

This document concerns the award of a contract for the supply of 13 kA and 20.5 kA, 18 V switched-mode power converters using sub-converters of 3.25 kA. Following a market survey (MS-2866/SL/LHC) carried out among 81 firms in seventeen Member States and a call for tenders for prototypes (IT-2919/SL/LHC) sent on 11 June 2001, a call for tenders for the supply of the pre-series and series of 13 kA and 20.5 kA, 18 V switched-mode power converters both using sub-converters of 3.25 kA was sent to two firms on 17 September 2002. The Finance Committee is invited to agree to the negotiation of a contract with TRANSTECHNIK (DE), the only firm that has delivered a successfully qualifying prototype, for the supply of eighteen 13 kA and one 20.5 kA, 18 V switched-mode power converters and spares for a total amount of 4 607 731 euros (6 747 300 Swiss francs), not subject to revision. The rate of exchange used is that stipulated in the tender. The firm has indicated the following distribution by country of the contract val...
The Role of Low-Energy (less than 20 eV) Electrons in Astrochemistry: A Tale of Two Molecules

Science.gov (United States)

Arumainayagam, Chris

2016-07-01

In the interstellar medium, UV photolysis of ice mantles encasing dust grains is thought to be the mechanism that drives the synthesis of "complex" molecules. The source of this reaction-initiating UV light is assumed to be local because externally-sourced UV radiation cannot pass through the ice-containing dark, dense molecular clouds. Externally sourced cosmic rays (E_{max} ˜10^{20} eV), in addition to producing UV light within these clouds, also produce large numbers of low-energy (≤ 20 eV) secondary electrons. The goal of our studies is to understand the low-energy electron-induced processes that occur when high-energy cosmic rays interact with interstellar ices. Using electron stimulated desorption (ESD), post-irradiation temperature-programmed desorption (TPD), and infrared reflection absorption spectroscopy (IRAS), we have investigated the radiolysis initiated by electrons in condensed methanol and ammonia at ˜90K under ultrahigh vacuum (1 × 10^{-9} Torr) conditions. We have identified fifteen low-energy electron-induced methanol radiolysis products, many of which have been previously identified as being formed by methanol UV photolysis in the interstellar medium. We have also found evidence for the electron-induced formation from ammonia of hydrazine (N_2 H_4), diazene (N_2 H_2), cyclotriazane/triazene (N_3 H_3) and triazane (N_3 H_5). We have investigated the reaction yields' dependence on film thickness, irradiation time, incident current, electron energy, and metal substrate. These results provide a basis from which we can begin to understand the mechanisms by which methanol and ammonia can form more complex species in cosmic ices. Studies such as ours may ultimately help us better understand the initial stages of the genesis of life.
Insights into N-calls of mitochondrial DNA sequencing using MitoChip v2.0

Directory of Open Access Journals (Sweden)

Blakely Emma L

2011-10-01

Full Text Available Abstract Background Developments in DNA resequencing microarrays include mitochondrial DNA (mtDNA sequencing and mutation detection. Failure by the microarray to identify a base, compared to the reference sequence, is designated an 'N-call.' This study re-examined the N-call distribution of mtDNA samples sequenced by the Affymetrix MitoChip v.2.0, based on the hypothesis that N-calls may represent insertions or deletions (indels in mtDNA. Findings We analysed 16 patient mtDNA samples using MitoChip. N-calls by the proprietary GSEQ software were significantly reduced when either of the freeware on-line algorithms ResqMi or sPROFILER was utilized. With sPROFILER, this decrease in N-calls had no effect on the homoplasmic or heteroplasmic mutation levels compared to GSEQ software, but ResqMi produced a significant change in mutation load, as well as producing longer N-cell stretches. For these reasons, further analysis using ResqMi was not attempted. Conventional DNA sequencing of the longer N-calls stretches from sPROFILER revealed 7 insertions and 12 point mutations. Moreover, analysis of single-base N-calls of one mtDNA sample found 3 other point mutations. Conclusions Our study is the first to analyse N-calls produced from GSEQ software for the MitoChipv2.0. By narrowing the focus to longer stretches of N-calls revealed by sPROFILER, conventional sequencing was able to identify unique insertions and point mutations. Shorter N-calls also harboured point mutations, but the absence of deletions among N-calls suggests that probe confirmation affects binding and thus N-calling. This study supports the contention that the GSEQ is more capable of assigning bases when used in conjunction with sPROFILER.
Long-time behavior in numerical solutions of certain dynamical systems

International Nuclear Information System (INIS)

Vazquez, L.

1987-01-01

A general discretization of the ordinary nonlinear differential equations d 2 v/dt 2 =f(v) and dv/dt=g(v) is studied. The discrete scheme conserves the discrete analogous of a quantity that is conserved by the corresponding equations. This method is applied to two cases and no ''ghost solutions'' were observed for the long range calculation. In these cases we analyze the stability of the corresponding numerical scheme as a dynamical system and in the sense studied by Kuo Pen-Yu and Stetter. In particular we find a correspondence between both kinds of stability. (author)
Oxidation of SO2 and formation of water droplets under irradiation of 20MeV protons in N2/H2O/SO2

DEFF Research Database (Denmark)

Tomita, Shigeo; Nakai, Yoichi; Funada, Shuhei

2015-01-01

We have performed an experiment on charged droplet formation in a humidified N2 gas with trace SO2 concentration and induced by 20MeV proton irradiation. It is thought that SO2 reacts with the chemical species, such as OH radicals, generated through the reactions triggered by N2+ production. Both...
ChIPBase v2.0: decoding transcriptional regulatory networks of non-coding RNAs and protein-coding genes from ChIP-seq data.

Science.gov (United States)

Zhou, Ke-Ren; Liu, Shun; Sun, Wen-Ju; Zheng, Ling-Ling; Zhou, Hui; Yang, Jian-Hua; Qu, Liang-Hu

2017-01-04

The abnormal transcriptional regulation of non-coding RNAs (ncRNAs) and protein-coding genes (PCGs) is contributed to various biological processes and linked with human diseases, but the underlying mechanisms remain elusive. In this study, we developed ChIPBase v2.0 (http://rna.sysu.edu.cn/chipbase/) to explore the transcriptional regulatory networks of ncRNAs and PCGs. ChIPBase v2.0 has been expanded with ∼10 200 curated ChIP-seq datasets, which represent about 20 times expansion when comparing to the previous released version. We identified thousands of binding motif matrices and their binding sites from ChIP-seq data of DNA-binding proteins and predicted millions of transcriptional regulatory relationships between transcription factors (TFs) and genes. We constructed 'Regulator' module to predict hundreds of TFs and histone modifications that were involved in or affected transcription of ncRNAs and PCGs. Moreover, we built a web-based tool, Co-Expression, to explore the co-expression patterns between DNA-binding proteins and various types of genes by integrating the gene expression profiles of ∼10 000 tumor samples and ∼9100 normal tissues and cell lines. ChIPBase also provides a ChIP-Function tool and a genome browser to predict functions of diverse genes and visualize various ChIP-seq data. This study will greatly expand our understanding of the transcriptional regulations of ncRNAs and PCGs. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.
Microstructure-based modelling of the long-term monotonic and cyclic creep of the martensitic steel X 20(22) CrMoV 12 1

International Nuclear Information System (INIS)

Henes, D.; Straub, S.; Blum, W.; Moehlig, H.; Granacher, J.; Berger, C.

1999-01-01

The current state of development of the composite model of deformation of the martensitic steel X 20(22) CrMoV 12 1 under conditions of creep is briefly described. The model is able to reproduce differences in monotonic creep strength of different melts with slightly different initial microstructures and to simulate cyclic creep with alternating phases of tension and compression. (orig.)
Numerically evaluating the bispectrum in curved field-space— with PyTransport 2.0

Science.gov (United States)

Ronayne, John W.; Mulryne, David J.

2018-01-01

We extend the transport framework for numerically evaluating the power spectrum and bispectrum in multi-field inflation to the case of a curved field-space metric. This method naturally accounts for all sub- and super-horizon tree level effects, including those induced by the curvature of the field-space. We present an open source implementation of our equations in an extension of the publicly available PyTransport code. Finally we illustrate how our technique is applied to examples of inflationary models with a non-trivial field-space metric.
Projectile and target fragmentation at intermediate energies (20 MeV <= E/A <= 100 MeV)

International Nuclear Information System (INIS)

Dayras, R.A.

1985-04-01

In order to follow the evolution of the reaction mechanisms in the transition region of the intermediate energy range, detailed studies of projectile-like fragments from a 44 MeV/u 40 Ar projectile bombarding 27 Al and sup(NAT)T: targets have been made. Experimental results are given. Discussion of the data is presented: transfer reactions, isotopic distributions, the fragmentation model, and abrasion model are used in the discussion

Testing and Comparison of Imaging Detectors for Electrons in the Energy Range 10-20 keV

Science.gov (United States)

Matheson, J.; Moldovan, G.; Kirkland, A.; Allinson, N.; Abrahams, J. P.

2017-11-01

Interest in direct detectors for low-energy electrons has increased markedly in recent years. Detection of electrons in the energy range up to low tens of keV is important in techniques such as photoelectron emission microscopy (PEEM) and electron backscatter diffraction (EBSD) on scanning electron microscopes (SEMs). The PEEM technique is used both in the laboratory and on synchrotron light sources worldwide. The ubiquity of SEMs means that there is a very large market for EBSD detectors for materials studies. Currently, the most widely used detectors in these applications are based on indirect detection of incident electrons. Examples include scintillators or microchannel plates (MCPs), coupled to CCD cameras. Such approaches result in blurring in scintillators/phosphors, distortions in optical systems, and inefficiencies due the limited active area of MCPs. In principle, these difficulties can be overcome using direct detection in a semiconductor device. Growing out of a feasibility study into the use of a direct detector for use on an XPEEM, we have built at Rutherford Appleton Laboratory a system to illuminate detectors with an electron beam of energy up to 20 keV . We describe this system in detail. It has been used to measure the performance of a custom back-thinned monolithic active pixel sensor (MAPS), a detector based on the Medipix2 chip, and a commercial detector based on MCPs. We present a selection of the results from these measurements and compare and contrast different detector types.
Numerical study on the effect of non-condensable gases on the bi-phasic flow in geothermal wells; Estudio numerico del efecto de gases incondensables sobre el flujo bifasico en pozos geotermicos

Energy Technology Data Exchange (ETDEWEB)

Santoyo Gutierrez, Edgar; Garcia Gutierrez, Alfonso; Santoyo Gutierrez, Socrates; Morales Rosas, Jose Manuel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1993-09-01

The objective of this paper is to describe a numerical study to determine the flow characteristics that predominate in geothermal wells and that produces a significant amount of non-condensable gases. It is known that these gases affect the thermodynamic conditions that dominate the fluid transport in the well or inclusively within the proper producing reservoir, therefore, it is extremely important to evaluate this effect. For this purpose the numerical model Geopozo V2.0 was developed. This model considers the carbon dioxide (CO{sub 2}) as the representative gas of the non-condensable gases present in the geothermal fluid. Due to this consideration, Geopozo V2.0 includes a methodology or the estimation of the thermodynamic and transport properties of geothermal fluids, considering these as a mix of two components: H{sub 2}O (vapor and liquid) and CO{sub 2}, under conditions of monophasic and biphasic flow. The application of Geopozo V2.0 for a typical case of flow in geothermal wells with high CO{sub 2} content revealed that the presence of this gas affects significantly the location of the flashing point inside the well and consequently, the amount of steam produced. This is of importance or the design and selection of the surface and generation equipment, aspect that to this date has been ignored (Suwana, 1991). [Espanol] El objetivo de este trabajo es describir un estudio numerico para determinar las caracteristicas del flujo que predominan en pozos geotermicos y que producen una cantidad significante de gases incondensables. Se tiene conocimiento de que estos gases afectan las condiciones termodinamicas que dominan el transporte de fluidos en el pozo o incluso dentro del mismo yacimiento geotermico productor, por lo que es de suma importancia evaluar dicho efecto. Para ello fue desarrollado el modelo numerico Geopozo V2.0. Este modelo considera al dioxido de carbono (CO{sub 2}) como el gas representativo de los incondensables presentes en el fluido geotermico
Tensor analysing power T{sub 2}0 in inelastic (d, d`) X scattering at 0{sup 0} on {sup 1}H and {sup 12}C from 4.5 to 9.0 GeV/c

Energy Technology Data Exchange (ETDEWEB)

Azhgirej, L S; Chernykh, E V [Laboratory of High Energies, Joint Institute for Nuclear Research, Dubna (Russian Federation); Kobushkin, A P [Institute of Theoretical Physics, Ukrainian Academy of Sciences, Kiev (Ukraine); and others

1998-12-01

Tensor analysing power T{sub 20} for inelastic (d, d`) X reaction at deuteron momentum from 4.2 to 9 GeV/c is presented. It is observed that T{sub 20} taken as a function of the four-momentum transfer squared t demonstrates an approximate scaling; its absolute value is small at |t| <{approx_equal} (0.05 - 0.1) GeV{sup 2}/c{sup 2} and has a maximum at -t {approx_equal}0.3 GeV{sup 2}/c{sup 2}. No significant dependence on the type of the target was observed 10 refs., 4 figs., 4 tabs.
Two co-existing germline mutations P53 V157D and PMS2 R20Q promote tumorigenesis in a familial cancer syndrome.

Science.gov (United States)

Wang, Zuoyun; Sun, Yihua; Gao, Bin; Lu, Yi; Fang, Rong; Gao, Yijun; Xiao, Tian; Liu, Xin-Yuan; Pao, William; Zhao, Yun; Chen, Haiquan; Ji, Hongbin

2014-01-01

Germline mutations are responsible for familial cancer syndromes which account for approximately 5-10% of all types of cancers. These mutations mainly occur at tumor suppressor genes or genome stability genes, such as DNA repair genes. Here we have identified a cancer predisposition family, in which eight members were inflicted with a wide spectrum of cancer including one diagnosed with lung cancer at 22years old. Sequencing analysis of tumor samples as well as histologically normal specimens identified two germline mutations co-existing in the familial cancer syndrome, the mutation of tumor suppressor gene P53 V157D and mismatch repair gene PMS2 R20Q. We further demonstrate that P53 V157D and/or PMS2 R20Q mutant promotes lung cancer cell proliferation. These two mutants are capable of promoting colony formation in soft agar as well as tumor formation in transgenic drosophila system. Collectively, these data have uncovered the important role of co-existing germline P53 and PMS2 mutations in the familial cancer syndrome development. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.
Numerical simulation of water quality in Yangtze Estuary

Directory of Open Access Journals (Sweden)

Xi Li

2009-12-01

Full Text Available In order to monitor water quality in the Yangtze Estuary, water samples were collected and field observation of current and velocity stratification was carried out using a shipboard acoustic Doppler current profiler (ADCP. Results of two representative variables, the temporal and spatial variation of new point source sewage discharge as manifested by chemical oxygen demand (COD and the initial water quality distribution as manifested by dissolved oxygen (DO, were obtained by application of the Environmental Fluid Dynamics Code (EFDC with solutions for hydrodynamics during tides. The numerical results were compared with field data, and the field data provided verification of numerical application: this numerical model is an effective tool for water quality simulation. For point source discharge, COD concentration was simulated with an initial value in the river of zero. The simulated increments and distribution of COD in the water show acceptable agreement with field data. The concentration of DO is much higher in the North Branch than in the South Branch due to consumption of oxygen in the South Branch resulting from discharge of sewage from Shanghai. The DO concentration is greater in the surface layer than in the bottom layer. The DO concentration is low in areas with a depth of less than 20 m, and high in areas between the 20-m and 30-m isobaths. It is concluded that the numerical model is valuable in simulation of water quality in the case of specific point source pollutant discharge. The EFDC model is also of satisfactory accuracy in water quality simulation of the Yangtze Estuary.
Salpeter equation in position space: Numerical solution for arbitrary confining potentials

International Nuclear Information System (INIS)

Nickisch, L.J.; Durand, L.; Durand, B.

1984-01-01

We present and test two new methods for the numerical solution of the relativistic wave equation [(-del 2 +m 1 2 )/sup 1/2/+(-del 2 +m 2 2 )/sup 1/2/+V(r)-M]psi( r ) = 0, which appears in the theory of relativistic quark-antiquark bound states. Our methods work directly in position space, and hence have the desirable features that we can vary the potential V(r) locally in fitting the qq-bar mass spectrum, and can easily build in the expected behavior of V for r→0,infinity. Our first method converts the nonlocal square-root operators to mildly singular integral operators involving hyperbolic Bessel functions. The resulting integral equation can be solved numerically by matrix techniques. Our second method approximates the square-root operators directly by finite matrices. Both methods converge rapidly with increasing matrix size (the square-root matrix method more rapidly) and can be used in fast-fitting routines. We present some tests for oscillator and Coulomb interactions, and for the realistic Coulomb-plus-linear potential used in qq-bar phenomenology
Numerical 3D Model for Thermal Integration of 20W Methanol Reformer

National Research Council Canada - National Science Library

Blackwell, N. E; Palo, D. R

2006-01-01

....8 cm 20W methanol reformer for Future Force Warrior and Future Combat Systems. Fuel cell technology development is being pursued around the world to provide electric power in many potential applications in the military and commercial sector...
Analytical and numerical solutions of the Schrödinger–KdV equation

Indian Academy of Sciences (India)

solitary wave ansatz method is used to carry out the integration of the ..... Exact rational travelling wave solutions of SKdV equation obtained by the ...... Air Force Office of Scientific Research (AFOSR) under the award number: W54428-RT-.
Validation and Verification (V&V) of Safety-Critical Systems Operating Under Off-Nominal Conditions

Science.gov (United States)

Belcastro, Christine M.

2012-01-01

Loss of control (LOC) remains one of the largest contributors to aircraft fatal accidents worldwide. Aircraft LOC accidents are highly complex in that they can result from numerous causal and contributing factors acting alone or more often in combination. Hence, there is no single intervention strategy to prevent these accidents. Research is underway at the National Aeronautics and Space Administration (NASA) in the development of advanced onboard system technologies for preventing or recovering from loss of vehicle control and for assuring safe operation under off-nominal conditions associated with aircraft LOC accidents. The transition of these technologies into the commercial fleet will require their extensive validation and verification (V&V) and ultimate certification. The V&V of complex integrated systems poses highly significant technical challenges and is the subject of a parallel research effort at NASA. This chapter summarizes the V&V problem and presents a proposed process that could be applied to complex integrated safety-critical systems developed for preventing aircraft LOC accidents. A summary of recent research accomplishments in this effort is referenced.
agriGO v2.0: a GO analysis toolkit for the agricultural community, 2017 update.

Science.gov (United States)

Tian, Tian; Liu, Yue; Yan, Hengyu; You, Qi; Yi, Xin; Du, Zhou; Xu, Wenying; Su, Zhen

2017-07-03

The agriGO platform, which has been serving the scientific community for >10 years, specifically focuses on gene ontology (GO) enrichment analyses of plant and agricultural species. We continuously maintain and update the databases and accommodate the various requests of our global users. Here, we present our updated agriGO that has a largely expanded number of supporting species (394) and datatypes (865). In addition, a larger number of species have been classified into groups covering crops, vegetables, fish, birds and insects closely related to the agricultural community. We further improved the computational efficiency, including the batch analysis and P-value distribution (PVD), and the user-friendliness of the web pages. More visualization features were added to the platform, including SEACOMPARE (cross comparison of singular enrichment analysis), direct acyclic graph (DAG) and Scatter Plots, which can be merged by choosing any significant GO term. The updated platform agriGO v2.0 is now publicly accessible at http://systemsbiology.cau.edu.cn/agriGOv2/. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.
Measurements of the np total cross section difference ΔσL at 1.59,1.79 and 2.20 GeV

International Nuclear Information System (INIS)

Sharov, V.I.; Zaporozhets, S.A.

2000-01-01

New results of the neutron-proton spin-dependent total cross section difference Δσ L (np) at the neutron beam kinetic energies 1.59,1.79 and 2.20 GeV are presented. Measurements were performed at the Synchrophasotron of the Laboratory of High Energies of the Joint Institute for Nuclear Research in Dubna. A quasi-monochromatic neutron beam was produced by break-up of extracted polarized deuterons. Neutrons were transmitted through a large polarized proton target. Measurements were performed either with a parallel or an antiparallel beam and target polarizations, both oriented along the beam momentum. The results at the two higher energies were measured with two opposite beam and target polarization directions. Only one target polarization direction was available at 1.59 GeV. The present measurements agree well with existing data. A fast decrease of the -Δσ L (np) values with increasing energy above 1.1 GeV was confirmed. The new results are also compared with model predictions and with phase shift analysis fits. The Δσ L quantities for the isosinglet state I=0, deduced from the measured Δσ L (np) values and known Δσ L (pp) data, are given. (orig.)
CASSINI RSS RAW DATA SET - SROC20 V1.0

Data.gov (United States)

National Aeronautics and Space Administration — The Cassini Radio Science Saturn Ring and Atmospheric Occultation experiments (SROC20) Raw Data Archive is a time-ordered collection of radio science raw data...
A beamline design and data acquisition with the 20-MeV, 20-ps electron beam for the higher-order mode studies of the APS SR-rf cavities

International Nuclear Information System (INIS)

Song, J.; Nassiri, A.; Daly, R.

1993-01-01

A beamline has been designed and assembled to use the ANL Chemistry Division 20-MeV electron linac for the testing of higher-order mode excitation and damping in rf cavities. The beamline consists of two sections (a beam collimating section with a 1.5 inches-OD vacuum line, and a cavity test section with a 3 inches-OD vacuum line), separated by two double aluminum foil windows. The beam diagnostics consist of a stripline beam position monitor, integrating current transformers, fluorescent screens, and a Faraday cup. EPICS (Experimental Physics and Industrial Control System) is used for beamline control, monitoring, and data acquisition. Also described is the diagnostic system used for beam image capture and analysis using EPICS-controlled hardware and PV-WAVE software. The rf cavity measurement will be described in a separate paper
Further evidence for mesons with spin 3, 4, and 5 in the mass region 2.0 to 2.6 GeV/c2

International Nuclear Information System (INIS)

Carter, A.A.

1977-04-01

The experimental trajectories of dsigma/dΩ zeros in the complex z-plane for anti p p elastic scattering in the backward hemisphere over the c.m. energy region 2.0 to 2.6 GeV are determined. The results support the existence of dominant states with Jsup(PC) = 3 -- , 4 ++ , 5 -- at masses consistent with enhancements seen in other anti p p formation reactions. (author)
Magnetoresistances in Ni80Fe20-ITO granular film

International Nuclear Information System (INIS)

Gao Chunhong; Chen Ke; Yang Yanxia; Xiong Yuanqiang; Chen Peng

2012-01-01

Highlights: ► Magnetoresistance (MR) in Ni 80 Fe 20 -ITO granular film are investigated. ► MR is positive at high temperature, and is negative at low temperature. ► MR results from the competition among three mechanisms. - Abstract: The magnetic properties, electrical properties and magnetoresistance are investigated in Ni 80 Fe 20 -ITO granular film with various volume fractions V NF of Ni 80 Fe 20 . The room temperature magnetization hysteresis of sample with V NF = 25% shows superparamagnetic behavior. Current-voltage curve of sample with V NF = 25% at 175 K shows typical tunneling-type behavior. The magnetoresistances of samples with low V NF are positive at high temperature, and are negative at low temperature. The temperature-dependent magnetoresistances result from the competition among ordinary magnetoresistances, the granular-typed tunneling magnetoresistance and the spin-mixing induced magnetoresistances.
Plasma modelling and numerical simulation

International Nuclear Information System (INIS)

Van Dijk, J; Kroesen, G M W; Bogaerts, A

2009-01-01

Plasma modelling is an exciting subject in which virtually all physical disciplines are represented. Plasma models combine the electromagnetic, statistical and fluid dynamical theories that have their roots in the 19th century with the modern insights concerning the structure of matter that were developed throughout the 20th century. The present cluster issue consists of 20 invited contributions, which are representative of the state of the art in plasma modelling and numerical simulation. These contributions provide an in-depth discussion of the major theories and modelling and simulation strategies, and their applications to contemporary plasma-based technologies. In this editorial review, we introduce and complement those papers by providing a bird's eye perspective on plasma modelling and discussing the historical context in which it has surfaced. (editorial review)
Dissipative behavior of some fully non-linear KdV-type equations

Science.gov (United States)

Brenier, Yann; Levy, Doron

2000-03-01

The KdV equation can be considered as a special case of the general equation u t+f(u) x-δg(u xx) x=0, δ>0, where f is non-linear and g is linear, namely f( u)= u2/2 and g( v)= v. As the parameter δ tends to 0, the dispersive behavior of the KdV equation has been throughly investigated (see, e.g., [P.G. Drazin, Solitons, London Math. Soc. Lect. Note Ser. 85, Cambridge University Press, Cambridge, 1983; P.D. Lax, C.D. Levermore, The small dispersion limit of the Korteweg-de Vries equation, III, Commun. Pure Appl. Math. 36 (1983) 809-829; G.B. Whitham, Linear and Nonlinear Waves, Wiley/Interscience, New York, 1974] and the references therein). We show through numerical evidence that a completely different, dissipative behavior occurs when g is non-linear, namely when g is an even concave function such as g( v)=-∣ v∣ or g( v)=- v2. In particular, our numerical results hint that as δ→0 the solutions strongly converge to the unique entropy solution of the formal limit equation, in total contrast with the solutions of the KdV equation.
Towards tabletop production of intense quasimonochromatic X-ray beams using small 2-20 MeV accelerators

International Nuclear Information System (INIS)

Avakian, R.O.; Ispirian, K.A.

2004-01-01

Full text: The existing synchrotron radiation sources and the fourth generation x-ray sources, which are projected at SLAC, USA, and DESY, Germany, are very expensive. For this reason the search of the novel and cheaper sources using various types of radiation produced by 5-20 MeV electrons available at many hospitals, universities and firms in various countries is of great interest. In this article a review of the physics, history, new theoretical and experimental results and of some applications is given with a purpose to consider the possibilities of construction of small tabletop sources of quasimonochromatic X-ray photon beams necessary for scientific, industrial, medicine and other applications. Simple formulae for almost all types of radiation are given with the help of which one can estimate the expected useful yield and background. PACS: 41.60.-m; 43.35.Ty; 61.85+p;m 78.67.Pt; 78.70.-g. Key words: Bremsstrahlung/Cherenkov radiation/ Transition radiation / Parametric X-ray radiation / Channeling radiation/ Compton scattering
Total neutron cross sections at energies around 20 MeV

International Nuclear Information System (INIS)

Morales, J.R.; Romero, J.L.; Martens, P.

1990-09-01

The results for measurements of total cross sections on C, Al, Mg, Cu, Ge and Pb at 17.6 and 19.8 MeV are reported. A detailed comparison is presented with previous data and with the global optical model by the Ohio group. We also discuss plans for total non elastic cross section measurements. 31 refs, 12 figs, 2 tabs
Study of energy response and resolution of the ATLAS barrel calorimeter to hadrons of energies from 20 to 350 GeV

Energy Technology Data Exchange (ETDEWEB)

Abat, E [Bogazici University, Faculty of Sciences, Department of Physics, TR - 80815 Bebek-Istanbul (Turkey); Abdallah, J M [Institut de Fisica d' Altes Energies, IFAE, Universitat Autonoma de Barcelona, Edifici Cn, ES - 08193 Bellaterra (Barcelona) (Spain); Addy, T N [Hampton University, Department of Physics, Hampton, VA 23668 (United States); Adragna, P [Queen Mary, University of London, Mile End Road, E1 4NS London (United Kingdom); Aharrouche, M [Universitaet Mainz, Institut fuer Physik, Staudinger Weg 7, DE 55099 (Germany); Ahmad, A [Department of Physics and Astronomy, Stony Brook, NY 11794-3800 (United States); Akesson, T P.A. [Lunds Universitet, Naturvetenskapliga Fakulteten, Fysiska Institutionen, Box 118, SE - 221 00, Lund (Sweden); Aleksa, M [European Laboratory for Particle Physics (CERN), CH-1211 Geneva 23 (Switzerland); Alexa, C [National Institute of Physics and Nuclear Engineering (Bucharest -IFIN-HH), P.O. Box MG-6, R-077125 Bucharest (Romania); Anderson, K [University of Chicago, Enrico Fermi Institute, 5640 S. Ellis Avenue, Chicago, IL 60637 (United States); Anghinolfi, F [European Laboratory for Particle Physics (CERN), CH-1211 Geneva 23 (Switzerland); Antonaki, A; Arabidze, G [University of Athens, Nuclear and Particle Physics Department of Physics, Panepistimiopouli Zografou, GR 15771 Athens (Greece); Arik, E [Bogazici University, Faculty of Sciences, Department of Physics, TR - 80815 Bebek-Istanbul (Turkey); Baker, O K [Yale University, Department of Physics, PO Box 208121, New Haven, CT 06520-8121 (United States); Banfi, D [Universita di Milano, Dipartimento di Fisica and INFN, via Celoria 16, IT - 20133 Milano (Italy); Baron, S [European Laboratory for Particle Physics (CERN), CH-1211 Geneva 23 (Switzerland); Beck, H P [University of Bern, Laboratory for High Energy Physics, Sidlerstrasse 5, CH - 3012 Bern (Switzerland)

2010-09-21

A fully instrumented slice of the ATLAS detector was exposed to test beams from the SPS (Super Proton Synchrotron) at CERN in 2004. In this paper, the results of the measurements of the response of the barrel calorimeter to hadrons with energies in the range 20-350 GeV and beam impact points and angles corresponding to pseudo-rapidity values in the range 0.2-0.65 are reported. The results are compared to the predictions of a simulation program using the Geant 4 toolkit.

Study of energy response and resolution of the ATLAS barrel calorimeter to hadrons of energies from 20 to 350 GeV

International Nuclear Information System (INIS)

Abat, E.; Abdallah, J.M.; Addy, T.N.; Adragna, P.; Aharrouche, M.; Ahmad, A.; Akesson, T.P.A.; Aleksa, M.; Alexa, C.; Anderson, K.; Anghinolfi, F.; Antonaki, A.; Arabidze, G.; Arik, E.; Baker, O.K.; Banfi, D.; Baron, S.; Beck, H.P.

2010-01-01

A fully instrumented slice of the ATLAS detector was exposed to test beams from the SPS (Super Proton Synchrotron) at CERN in 2004. In this paper, the results of the measurements of the response of the barrel calorimeter to hadrons with energies in the range 20-350 GeV and beam impact points and angles corresponding to pseudo-rapidity values in the range 0.2-0.65 are reported. The results are compared to the predictions of a simulation program using the Geant 4 toolkit.
Resonances in the system of π+π--mesons from np→npπ+π- reaction at Pn=5.20 GeV/c: search, results of direct observations, interpretation

International Nuclear Information System (INIS)

Troyan, Yu.A.; Plekhanov, E.B.; Pechenov, V.N.; Troyan, A.Yu.; Belyaev, A.V.; Ierusalimov, A.P.; Arakelyan, S.G.

2002-01-01

Ten resonances were found in the mass spectrum of a π + π - system based on 66075 events from np→npπ + π - reaction in np-interactions at P n =(5.20±0.16)GeV/c in the one-meter hydrogen bubble chamber of the LHE (JINR) by using the criterion cos Θ* p>0. These masses are the following: (347±12), (418±6), (511±12), (610±5), (678±17), (757±5), (880±12), (987±12), (1133±15), and (1285±22) MeV/c 2 ; their excesses above the background are 2.9, 5.2, 3.5, 1.4, 2.0, 8.5, 4.8, 3.8, 5.2, and 6.0 standard deviations, respectively. The experimental widths of the resonances vary within the region from 16 to 94 MeV/c 2 . Such effects were not found in π - π 0 combinations from np→ppπ - π 0 reaction. Therefore, it is necessary to attribute the value of isotopic spin I=0 to the resonances found in the mass spectrum of the π + π - system. The spin was estimated for the most statistically provided resonances at masses of 418, 511 and 757 MeV/c 2 . We determine with a high degree of confidence that J=0 for the resonances at M R =757 MeV/c 2 and M R =418 MeV/c 2 and the most probable value of J=0 for the resonance at M R =511 MeV/c 2 . Therefore, it can be affirmed that at least 3 states with quantum numbers of σ 0 -meson 0 + (0 ++ ) have been found at masses of 418, 511 and 757 MeV/c 2 . The fact that low-mass σ 0 -mesons are glueballs is one of the possible interpretations. Comparison with the data of other papers has also been made
Følelser for farver i det 20. århundrede

DEFF Research Database (Denmark)

Skude, Flemming

2002-01-01

Grundtræk i arkitekternes farvesyn i det 20. århundrede med vægt på Le Corbusiers indflydelse og den senere postmoderne pluralisme i farvesætningen.......Grundtræk i arkitekternes farvesyn i det 20. århundrede med vægt på Le Corbusiers indflydelse og den senere postmoderne pluralisme i farvesætningen....
Fusion with projectiles from carbon to argon at energies between 20A MeV and 60A MeV

International Nuclear Information System (INIS)

Galin, J.

1986-01-01

Fusion reactions are known to be the dominant reaction channel at low bombarding energies and can now be investigated with a large variety of projectiles at several tens of MeV per nucleon. The gross characteristics of the fusion process can be studied by measuring global quantities, such as the linear momentum transferred from projectile to target and the dissipated energy of the reaction. The strong correlation between these two quantities is demonstrated at moderate bombarding energies, with a Ne projectile on a U target. It is expected that light particle (charged or neutron) multiplicity measurements can be extended to this higher energy domain and be used to selectively filter these collisions, according to their degree of violence. A review of the linear momentum transfer is made, considering essentially heavy targets and two important parameters in the entrance channel: the projectile energy and its mass. Over a broad mass range, and for energies up to 30A MeV, the momentum transfer scales with the mass of the projectile. At 30A MeV, the most probable value of projectile momentum transferred to the fused system is 80%, and this represents roughly 180 MeV/c per projectile nucleon. At higher bombarding energies, the momentum distribution in the fused systems, as observed from binary fission events, seems to depend on the mass of the projectile. Further studies are still needed to understand this behavior. Finally, the decay of highly excited (E* similarly ordered 500-800 MeV) fused systems, with masses close to 270 amu, is studied from the characteristics of both fusion fragments and light charged particles. It is shown that thermal equilibrium is reached before fission, even for such high energy deposition. However, the decay sequence is sensitive to dynamical effects and does not depend only on available phase space
Neural underpinnings of divergent production of rules in numerical analogical reasoning.

Science.gov (United States)

Wu, Xiaofei; Jung, Rex E; Zhang, Hao

2016-05-01

Creativity plays an important role in numerical problem solving. Although the neural underpinnings of creativity have been studied over decades, very little is known about neural mechanisms of the creative process that relates to numerical problem solving. In the present study, we employed a numerical analogical reasoning task with functional Magnetic Resonance Imaging (fMRI) to investigate the neural correlates of divergent production of rules in numerical analogical reasoning. Participants performed two tasks: a multiple solution analogical reasoning task and a single solution analogical reasoning task. Results revealed that divergent production of rules involves significant activations at Brodmann area (BA) 10 in the right middle frontal cortex, BA 40 in the left inferior parietal lobule, and BA 8 in the superior frontal cortex. The results suggest that right BA 10 and left BA 40 are involved in the generation of novel rules, and BA 8 is associated with the inhibition of initial rules in numerical analogical reasoning. The findings shed light on the neural mechanisms of creativity in numerical processing. Copyright © 2016 Elsevier B.V. All rights reserved.
Numerical analysis of free surface instabilities in the IFMIF lithium target

International Nuclear Information System (INIS)

Gordeev, S.; Heinzel, V.; Moeslang, A.

2007-01-01

The International Fusion Materials Facility (IFMIF) facility uses a high speed (10-20 m/s) Lithium (Li) jet flow as a target for two 40 MeV/125 mA deuteron beams. The major function of the Li target is to provide a stable Li jet for the production of an intense neutron flux. For the understanding the lithium jet behaviour and elimination of the free-surface flow instabilities a detailed analysis of the Li jet flow is necessary. Different kinds of instability mechanisms in the liquid jet flow have been evaluated and classified based on analytical and experimental data. Numerical investigations of the target free surface flow have been performed. Previous numerical investigations have shown in principle the suitability of CFD code Star- CD for the simulation of the Li-target flow. The main objective of this study is detailed numerical analysis of instabilities in the Li-jet flow caused by boundary layer relaxation near the nozzle exit, transition to the turbulence flow and back wall curvature. A number of CFD models are developed to investigate the formation of instabilities on the target surface. Turbulence models are validated on the experimental data. Experimental observations have shown that the change of the nozzle geometry at the outlet such as a slight divergence of the nozzle surfaces or nozzle edge defects causes the flow separation and occurrence of longitudinal periodic structures on the free surface with an amplitude up to 5 mm. Target surface fluctuations of this magnitude can lead to the penetration of the deuteron beam in the target structure and cause the local overheating of the back plat. Analysis of large instabilities in the Li-target flow combined with the heat distribution in lithium depending on the free surface shape is performed in this study. (orig.)
Implementation of life cycle impact assessment methods. Data v2.0 (2007). Ecoinvent report No. 3

International Nuclear Information System (INIS)

Frischknecht, R.; Jungbluth, N.; Althaus, H.-J.; Hischier, R.; Doka, G.; Bauer, Ch.; Dones, R.; Nemecek, T.; Hellweg, S.; Humbert, S.; Margni, M.; Koellner, T.; Loerincik, Y.

2007-12-01

The ecoinvent database offers life cycle inventory (LCI) and life cycle impact assessment (LCIA) results. The following LCIA methods are implemented in the ecoinvent data v2.0: CML 2001; Cumulative energy demand; Cumulative exergy demand; Eco-indicator 99; Ecological footprint; Ecological scarcity 1997; Ecosystem damage potential EDP; EDIP'97 and 2003 (Environmental design of industrial products); EPS 2000 (environmental priority strategies in product development (will be provided with ecoinvent data v2.1)); IMPACT 2002+; IPCC 2001 (climate change); TRACI; Selected life cycle inventory indicators. There is a range of methodological problems and questions while linking the LCIA methods with the elementary flows of a database. This lead to different results in the past, even if the same LCIA method was applied on the same inventory results. The aim of this report is to avoid such discrepancies. In the first part of this report the general assumptions for the implementation of impact assessment methods on the ecoinvent life cycle inventory data are described. For that purpose, general and harmonised rules were developed how to deal with a certain problem. The second part of this report contains a detailed description of the implementation of the above mentioned methods. Please refer to the original publications for a general description and the scientific background of the methods. It is strongly recommended to read the original publications before using the LCIA results from the ecoinvent database. It is recommended to follow these implementation guidelines also while using other or new LCIA methods, which are so far not implemented in ecoinvent data. (authors)
Implementation of life cycle impact assessment methods. Data v2.0 (2007). Ecoinvent report No. 3

Energy Technology Data Exchange (ETDEWEB)

Frischknecht, R. (ed.) [Ecoinvent Centre, Swiss Federal Laboratories for Materials Testing and Research (EMPA), Duebendorf (Switzerland); Jungbluth, N. (ed.) [ESU-services Ltd, Uster (Switzerland); Althaus, H.-J.; Hischier, R. [Swiss Federal Laboratories for Materials Testing and Research (EMPA), Duebendorf (Switzerland); Doka, G. [Doka Life Cycle Assessments (LCA), Zuerich (Switzerland); Bauer, Ch.; Dones, R. [Paul Scherrer Institute (PSI), Villigen (Switzerland); Nemecek, T. [Forschungsanstalt Agroscope Reckenholz-Taenikon (ART), Zuerich (Switzerland); Hellweg, S. [Swiss Federal Institute of Technology (ETHZ), Institute for Chemicals and Bioengineering (ICB), Zuerich (Switzerland); Humbert, S.; Margni, M. [Swiss Federal Institute of Technology (EPFL), Lausanne (Switzerland); Koellner, T. [Swiss Federal Institute of Technology (ETHZ), Zuerich (Switzerland); Loerincik, Y. [Ecointesys, Swiss Federal Institute of Technology (EPFL), Lausanne (Switzerland)

2007-12-15

The ecoinvent database offers life cycle inventory (LCI) and life cycle impact assessment (LCIA) results. The following LCIA methods are implemented in the ecoinvent data v2.0: CML 2001; Cumulative energy demand; Cumulative exergy demand; Eco-indicator 99; Ecological footprint; Ecological scarcity 1997; Ecosystem damage potential EDP; EDIP'97 and 2003 (Environmental design of industrial products); EPS 2000 (environmental priority strategies in product development (will be provided with ecoinvent data v2.1)); IMPACT 2002+; IPCC 2001 (climate change); TRACI; Selected life cycle inventory indicators. There is a range of methodological problems and questions while linking the LCIA methods with the elementary flows of a database. This lead to different results in the past, even if the same LCIA method was applied on the same inventory results. The aim of this report is to avoid such discrepancies. In the first part of this report the general assumptions for the implementation of impact assessment methods on the ecoinvent life cycle inventory data are described. For that purpose, general and harmonised rules were developed how to deal with a certain problem. The second part of this report contains a detailed description of the implementation of the above mentioned methods. Please refer to the original publications for a general description and the scientific background of the methods. It is strongly recommended to read the original publications before using the LCIA results from the ecoinvent database. It is recommended to follow these implementation guidelines also while using other or new LCIA methods, which are so far not implemented in ecoinvent data. (authors)
Design of 20-44 GHz broadband doubler MMIC

International Nuclear Information System (INIS)

Li Qin; Wang Zhigong; Li Wei

2010-01-01

This paper presents the design and performance of a broadband millimeter-wave frequency doubler MMIC using active 0.15 μm GaAs PHEMT and operating at output frequencies from 20 to 44 GHz. This chip is composed of a single ended-into differential-out active Balun, balanced FETs in push-push configuration, and a distributed amplifier. The MMIC doubler exhibits more than 4 dB conversion gain with 12 dBm of output power, and the fundamental frequency suppression is typically -20 dBc up to 44 GHz. The MMIC works at V DD = 3.5 V, V SS = -3.5 V, I d = 200 mA and the chip size is 1.5 x 1.8 mm 2 . (semiconductor integrated circuits)
Numerical Investigation of the IFMIF Lithium Target

International Nuclear Information System (INIS)

Gordeev, S.; Heinzel, V.; Slobodchuk, V.; Leichtle, D.; Anton Moeslang, A.

2006-01-01

The International Fusion Materials Facility (IFMIF) facility uses a high speed (10-20 m/s) Lithium (Li) jet flow as a target for two 40 MeV / 125 mA deuteron beams. The major function of the Li target is to provide a stable Li jet for the production of an intense neutron flux. For the understanding the lithium jet behaviour and elimination of the free-surface flow instabilities a detailed analysis of the Li jet flow is necessary. Numerical investigations of the IFMIF Li - Target have been performed with the CFD code Star-CD. A number of turbulence models were tested on the experimental data obtained at the water jet test facility of the Institute for Physics and Power Engineering (IPPE), Obninsk, Russia. Calculated and measured velocity profiles and thickness of the flow cross sections have been compared. The most suitable turbulence models were used for numerical investigations of the IFMIF Li-jet. For the analysis of the IFMIF Li target 3D models of the nozzle and jet flows have been developed. In the first part of analyses the nozzle flow effects, such as relaminarization of the accelerated flow, secondary motions and their influence on the development of the viscous layer and velocity profile have been investigated. Further evaluation of turbulence models was performed and recommendations for suitable turbulence models are given. Calculations predict the complete laminarization of the flow at the nozzle outlet for velocities less than 10 m/s. Within the transition region of velocities between 10 and 20 m/s calculations show the laminarization only in the first convergent part. In this case the acceleration dose not suppress secondary flows in the straight part near the nozzle exit. The second task is devoted to the stability of the Li jet flow. To this end, the influence of the nozzle outlet boundaries, jet curvature effects, gravity and surface tension on the free surface stability has been analysed. First calculations show, that such factors as gravity and
Numerical Characterization of Piezoceramics Using Resonance Curves

Science.gov (United States)

Pérez, Nicolás; Buiochi, Flávio; Brizzotti Andrade, Marco Aurélio; Adamowski, Julio Cezar

2016-01-01

Piezoelectric materials characterization is a challenging problem involving physical concepts, electrical and mechanical measurements and numerical optimization techniques. Piezoelectric ceramics such as Lead Zirconate Titanate (PZT) belong to the 6 mm symmetry class, which requires five elastic, three piezoelectric and two dielectric constants to fully represent the material properties. If losses are considered, the material properties can be represented by complex numbers. In this case, 20 independent material constants are required to obtain the full model. Several numerical methods have been used to adjust the theoretical models to the experimental results. The continuous improvement of the computer processing ability has allowed the use of a specific numerical method, the Finite Element Method (FEM), to iteratively solve the problem of finding the piezoelectric constants. This review presents the recent advances in the numerical characterization of 6 mm piezoelectric materials from experimental electrical impedance curves. The basic strategy consists in measuring the electrical impedance curve of a piezoelectric disk, and then combining the Finite Element Method with an iterative algorithm to find a set of material properties that minimizes the difference between the numerical impedance curve and the experimental one. Different methods to validate the results are also discussed. Examples of characterization of some common piezoelectric ceramics are presented to show the practical application of the described methods. PMID:28787875
Numerical Characterization of Piezoceramics Using Resonance Curves

Directory of Open Access Journals (Sweden)

Nicolás Pérez

2016-01-01

Full Text Available Piezoelectric materials characterization is a challenging problem involving physical concepts, electrical and mechanical measurements and numerical optimization techniques. Piezoelectric ceramics such as Lead Zirconate Titanate (PZT belong to the 6 mm symmetry class, which requires five elastic, three piezoelectric and two dielectric constants to fully represent the material properties. If losses are considered, the material properties can be represented by complex numbers. In this case, 20 independent material constants are required to obtain the full model. Several numerical methods have been used to adjust the theoretical models to the experimental results. The continuous improvement of the computer processing ability has allowed the use of a specific numerical method, the Finite Element Method (FEM, to iteratively solve the problem of finding the piezoelectric constants. This review presents the recent advances in the numerical characterization of 6 mm piezoelectric materials from experimental electrical impedance curves. The basic strategy consists in measuring the electrical impedance curve of a piezoelectric disk, and then combining the Finite Element Method with an iterative algorithm to find a set of material properties that minimizes the difference between the numerical impedance curve and the experimental one. Different methods to validate the results are also discussed. Examples of characterization of some common piezoelectric ceramics are presented to show the practical application of the described methods.
Calculation of a complete data set for n + 83Kr, 84Kr, 85Kr and 86Kr in the energy region 0.001-20 MeV

International Nuclear Information System (INIS)

Cai Chonghai

1999-01-01

Complete reaction cross sections, secondary neutron spectra and elastic scattering angular distributions of 83 Kr, 84 Kr, 85 Kr and 86 Kr in the energy region 0.001-20 MeV are calculated, theoretical results are in ENDF/B-6 in pretty good accordance with experimental data
Peripheral heavy-ion induced reactions at intermediate energies 20MeVV

International Nuclear Information System (INIS)

Barrette, J.; Berthier, B.; Chavez, E.

1984-03-01

Inclusive energy spectra and angular distributions of projectile like fragments in reactions induced by a 44 MeV/nucleon 40 Ar beam bombarding 27 Al and sup(nat)Ti targets show many of the features of high energy fragmentation. However, several aspects such as energy dissipation and production of fragments heavier than the projectile are reminiscent of a low energy behaviour
Interpretation of recent positron-electron measurements between 20 and 800 MeV

International Nuclear Information System (INIS)

Pellerin, C.J.; Hartman, R.C.

1975-01-01

The recent positron and negatron spectra measured by Hartman and Pellerin (see pages 402-407) are discussed with regard to the problem of solar modulation. At energies above 180 MeV, the spherically symmetric Fokker-Planck equation with a diffusion coefficient proportional to particle rigidity provides reasonable fits to both the positron and total electron data. At energies below 180 MeV the data are consistent with a continuation of the same diffusion coefficient and local source of negatrons, or a change in the diffusion coefficient to a constant value. (orig.) [de
Few-MeV neutrons incident on yttrium

International Nuclear Information System (INIS)

Budtz-Jorgensen, C.; Guenther, P.; Smith, A.; Whalen, J.

1982-09-01

Neutron total and scattering cross sections of elemental yttrium are measured in the few-MeV region with broad resolutions. The total-cross section measurements extend from approx. = 0.5 to 4.2 MeV in steps of less than or equal to 0.1 MeV. Neutron elastic- and inelastic-scattering cross sections are measured from approx. = 1.5 to 4.0 MeV, at incident-neutron energy intervals of less than or equal to 50 keV and at ten or more scattering angles distributed between 20 and 160 deg. Inelastically-scattered neutron groups are observed corresponding to the excitation of levels at 909 +- 23, 1504 +- 20, 1747 +- 16, 2224 +- 16, 2567 +- 26, 2889 +- 12 and 3104 +- 10 keV. The experimental results are discussed in terms of the spherical optical-statistical, coupled-channels and core-coupling models and compared with corresponding quantities given in the evaluated nuclear data file ENDF/B-V
Numerical relativity

International Nuclear Information System (INIS)

Piran, T.

1982-01-01

There are many recent developments in numerical relativity, but there remain important unsolved theoretical and practical problems. The author reviews existing numerical approaches to solution of the exact Einstein equations. A framework for classification and comparison of different numerical schemes is presented. Recent numerical codes are compared using this framework. The discussion focuses on new developments and on currently open questions, excluding a review of numerical techniques. (Auth.)
Nanoparticle formation in H2O/N-2 and H2O/Ar mixtures under irradiation by 20 MeV protons and positive corona discharge

DEFF Research Database (Denmark)

Imanaka, M.; Tomita, S.; Kanda, S.

2010-01-01

To investigate the contribution of ions to gas nucleation, we have performed experiments on the formation of water droplets in H2O/N-2 and H2O/Ar gas mixtures by irradiation with a 20 MeV proton beam and by positive corona discharge. The size of the formed nanoparticles was measured using...
SimUVEx v2 : a numeric tool to predict anatomical solar ultraviolet exposure

OpenAIRE

Religi, Arianna; Moccozet, Laurent; Farahmand, Meghdad; Vuilleumier, L.aurent; Vernez, David; Milon, Antoine; Backes, Claudine; Bulliard, Jean-Luc

2016-01-01

Solar ultraviolet (UV) radiation has a dual effect on human health: low UV doses promote the photosynthesis of vitamin D and regulate calcium and phosphorus metabolism, while an excessive UV exposure is the main cause of skin cancer, along with eye diseases and premature skin ageing. The link between UV radiation levels and UV exposure is not fully understood since exposure data are limited and individual anatomical variations in UV doses are significant. SimUVEx is a numeric simulation tool ...
Study on mutation breeding and fermentation of antimicrobial lipopeptides yielding bacterium with 20 keV N+ ion beam implantation

International Nuclear Information System (INIS)

Fang Chuanji; Lu Zhaoxin; Sun Lijun; Lv Fengxia; Bie Xiaomei

2006-01-01

Bacillus amyloliquefaciens ES-2 was implanted with 20 keV N + ion beam to breed mutants of high yield of antimicrobial lipopeptides. The dose effects of the nitrogen ion implantation on the survival and positive mutations rate was studied. The mutant strain designated as B. amyloliquefaciens ES-2-4 showing higher yield of antimicrobial lipopeptides was obtained. The concentration of the lipopeptides in fermentation liquid increased by 15.2% compared with the original strain. The authors also studied the fermentation process between the mutant and the original strain. It indicated that the mutant with shorter lag phase, longer stable phase and higher yield of the lipopeptides, which was suitable for large-scale production. (authors)

Elastic scattering of polarized deuterons from hydrogen at 2.0, 1.6, and 1.2 GeV and search for critical opalescence in inelastic scattering of protons from carbon-12 at 800 MeV

International Nuclear Information System (INIS)

Haji-Saeid, S.M.

1981-01-01

Large deuteron vector and tensor asymmetries were measured for the first time at intermediate energies. The polarized deuteron beam (with tensor and vector components of 0.75 and 0.25, respectively) was used at energies of 2.0, 1.6, and 1.2 GeV. The tensor and vector quantities P/sub yy/ and P/sub y/ were extracted from the data obtained within beam polarization normal to the scattering plane, and P/sub xx/ was obtained when the polarization was precessed into the scattering plane. Analysis of the data using multiple scattering theory demonstrates the importance of the noneikona correction to the Glauber Model and also the sensitivity of the data to double-spin flip components of the NN amplitudes. The differential cross section for the 12 C(p,p') 12 C* (15.11 MeV, 1 + , T=1) reaction was measured at 800 MeV; the range of the angular distribution corresponds to momentum transfers of 0.7 to 2.4 fm -1 (1 to 3.3 m/sub π/). The cross section decreases almost exponentially at large angles; no maximum is observed in the region where nuclear critical opalescence might be expected. Cross sections measured in parallel to the 15.11-MeV state were for the levels at 11.83 (2 - ), 12.71 (1 + ), 13.35 (2 - ), 16.1 (2 + ), and 16.58 (2 - ) MeV. 86 figures 18 tables
Fast neutron emission in the interaction of 9 MeV/nucleon 12C and 20Ne ions with 181Ta nuclei

International Nuclear Information System (INIS)

Kozulin, Eh.M.; Blinov, M.V.; Kovalenko, S.S.; Mozhaev, A.N.; Borcha, K.; Penionzhkevich, Yu.Eh.

1987-01-01

Energy spectra and angular distributions have been measured for neutrons emitted from the 12 C(105 MeV)+ 181 Ta and 20 Ne(180 MeV)+ 181 Ta reactions. The obtained experimental data suggest a conclusion that both the equilibrium and pre-equilibrium components of the neutron emission are present in each reaction. However, yields and angular distributions of the pre-equilibrium neutrons emitted in these reactions are considerably different. By comparing the present results with other data, it is shown that the pre-equilibrium neutron emission has a more isotropic distribution than that for protons for the same entrance channel of the reaction. Besides, an information has been obtained on a dependence of the preequilibrium neutron and proton yields on the projectile mass. The data are analysed in terms of a statistical model describing the emission of evaporated neutrons, as well as in terms of the ''rotating hot spot'' model and the moving source model, for preequilibrium neutrons
Study air ingress into the reactor vessel using ICARE/CATHARE V2.0 in case of severe accident

International Nuclear Information System (INIS)

Gwenaelle Le Dantec; Fichot, F.

2005-01-01

Full text of publication follows: Safety analyses show that core degradation during a severe reactor accident would not be uniform. This was confirmed by TMI2 examinations. In fact, a central region of the core may overheat, melt and flow down to the lower plenum of the reactor while peripheral regions of the core would remain almost intact. Following rupture of the vessel by molten debris, air may be drawn from the containment by natural convection into the reactor coolant system, and react with the intact rods. Studying air ingress into the reactor vessel is of interest because the interaction of air with Zircaloy cladding can strongly affect the evolution of severe accident scenarios. The main effects are heat generation, increasing clad degradation, fission product release and nitriding. In case of air/steam recirculation in the vessel, significant nitriding of cladding can occur. The resulting ZrN phase is characterized by its brittleness and instability under oxidizing conditions, Oxidation of pre-existing ZrN phase layers has been observed to result in violent oxidation and heat release. Therefore, the first consequence for safety is a risk of strong deflagration in the vessel if a large number of rods on which a substantial layer of ZrN has grown are suddenly in contact with oxygen or steam. The second consequence is a late melting of core materials due to the very exothermic oxidation, leading to a late release of materials out of the reactor pressure vessel (RPV). In this paper we present an ICARE/CATHARE V2.0 calculation simulating air ingress into the vessel and in particular to describe the nitriding due to natural convection in the reactor vessel. The basic modeling and the necessary extensions of both ICARE and CATHARE are explained. The natural circulation is calculated to predict the regions of oxygen starvation where nitriding takes place. Key words: air ingress, nitriding, ICARE/CATHARE V2.0. (authors)
Operational experience with -20 kV, 5 A DC power supply in Indus-2 RF system

International Nuclear Information System (INIS)

Tyagi, R.K.; Tripathi, A.; Upadhyay, R.; Badapanda, M.K.; Lad, M.

2015-01-01

An AC regulator based -20 kV, 5 A DC power supply is employed to bias 60 kW, 505.8 MHz klystron amplifier in Indus-2 RF system. A three terminal triggered spark gap based crowbar along with suitable limiting elements is incorporated at the output of the power supply for protection of sensitive klystron amplifier during load arcing conditions. Wire burn test is carried out on this power supply along with crowbar to ensure that the stored energy dumped into klystron during its arcing is less than 20 Joule. Various protection circuits like over voltage, over current, under voltage, phase failure, thermal overload and transformer oil over temperature protection have been incorporated in this power supply. Preventive maintenance of the power supply is carried out at regular intervals to ensure that it operates satisfactorily during actual operation.This includes checking the breakdown strength of transformer oil, drying of Silica gels in transformer breathers, checking of all electrical connections and cleaning of all high voltage components. The calibration of various meters, checking the setting of various protection-interlock cards and checking the healthiness of crowbar system are also done at regular intervals. During operation, crucial performance parameters of this power supply along with various interlock signals are continuously monitored. Suitable arrangement has been made to operate this supply either in local mode as well as in remote mode. This power supply is operating satisfactorily with klystron amplifier in Indus-2 RF system in round the clock mode for last 15 years and its operational experience are presented in this paper. (author)
Curriculum vitae of the LOTOS–EUROS (v2.0 chemistry transport model

Directory of Open Access Journals (Sweden)

A. M. M. Manders

2017-11-01

on the effect of model changes using benchmarking and validation. The performance of v2.0 with respect to EMEP observations is good, with spatial correlations around 0.8 or higher for concentrations and wet deposition. Temporal correlations are around 0.5 or higher. Recent innovative applications include source apportionment and data assimilation, particle number modelling, and energy transition scenarios including corresponding land use changes as well as Saharan dust forecasting. Future developments would enable more flexibility with respect to model horizontal and vertical resolution and further detailing of model input data. This includes the use of different sources of land use characterization (roughness length and vegetation, detailing of emissions in space and time, and efficient coupling to meteorology from different meteorological models.
Tensor analyzing power T20 of the dd →3Hen and dd →3Hp reactions at zero angle for energies 140, 200, and 270 MeV

International Nuclear Information System (INIS)

Ladygin, V. P.; Uesaka, T.; Saito, T.; Hatano, M.; Isupov, A. Yu.; Kato, H.; Ladygina, N. B.; Maeda, Y.; Malakhov, A. I.; Nishikawa, J.; Ohnishi, T.; Okamura, H.; Reznikov, S. G.; Sakai, H.; Sakamoto, N.; Sakoda, S.; Satou, Y.; Sekiguchi, K.; Suda, K.; Tamii, A.

2006-01-01

RIKEN Accelerator Research Facility data on the tensor analyzing power T 20 of the dd → 3 Hen and dd → 3 Hp reactions at zero angle for deuteron kinetic energies of 140, 200, and 270 MeV are reported. The observed positive sign of T 20 clearly demonstrates the sensitivity to the D/S-wave ratio in the 3 He and 3 H wave functions in the energy range of the experiment. Data on T 20 for the 3 Hen channel are in agreement with those for the 3 Hp channel within the experimental errors
An annealing study of charge collection efficiency on Float-Zone p-on-n ministrip sensors irradiated with 24 GeV/c protons and 20 MeV neutrons

International Nuclear Information System (INIS)

Pacifico, N.; Dolenc-Kittelmann, I.; Gabrysch, M.; Moll, M.; Lucas, C.

2015-01-01

Float-Zone n-bulk p-readout silicon sensors are currently operated in the tracking layers of many High Energy Physics experiments, where they are exposed to moderate to high fluences of hadrons. Though n-readout sensors, either with p or n bulk, are available and are offering an improved radiation hardness, p-on-n sensors are still widely used and are e.g. installed in the present ATLAS and CMS experiments at CERN. Their radiation hardness and long-term performance are therefore of high interest to the detector community. We present here a study performed on these sensors after irradiation with 24 GeV/c protons and 20 MeV neutrons to fluences ranging from 1⋅10 14 to 1⋅10 15 n eq /cm 2 . The sensors were then investigated for charge collection efficiency after different isothermal annealing steps in order to understand the performance evolution of the sensor with annealing time. Additional measurements were performed for the highest neutron fluence by means of the Edge-TCT technique, to assess the electric field configuration within the sensor. The irradiation and the annealing scenarios were chosen to represent the radiation damage scenario over the expected lifetime of the LHC detectors (and even further) and to assess the effect of unplanned annealing due to potentially longer warm shutdowns or cooling problems
Analytical and numerical solutions of the Schrödinger–KdV equation

Indian Academy of Sciences (India)

The Schrödinger–KdV equation with power-law nonlinearity is studied in this paper. The solitary wave ansatz method is used to carry out the integration of the equation and obtain one-soliton solution. The ′/ method is also used to integrate this equation. Subsequently, the variational iteration method and homotopy ...
Study of dissipative collisions of 20Ne (MeV/≅7-11 nucleon)+ 27Al

International Nuclear Information System (INIS)

Dey, Aparajita; Bhattacharya, C.; Bhattacharya, S.; Rana, T. K.; Kundu, S.; Banerjee, K.; Mukhopadhyay, S.; Banerjee, S. R.; Gupta, D.; Saha, R.

2007-01-01

The inclusive energy distributions of complex fragments (3≤9) emitted in the reactions 20 Ne (145, 158, 200, 218 MeV) + 27 Al have been measured in the angular range 10 deg. - 50 deg. The fusion-fission and the deep-inelastic components of the fragment yield have been extracted using multiple Gaussian functions from the experimental fragment energy spectra. The elemental yields of the fusion-fission component have been found to be fairly well explained in the framework of the standard statistical model. It is found that strong competition occurs between the fusion-fission and the deep-inelastic processes at these energies. The time scale of the deep-inelastic process was estimated to be typically in the range of ∼10 -21 -10 -22 s, and it was found to decrease with increasing fragment mass. The angular momentum dissipations in the fully energy damped deep-inelastic process have been estimated from the average energies of the deep-inelastic components of the fragment energy spectra. The estimated angular momentum dissipations, for lighter fragments in particular, are found to be greater than those predicted by the empirical sticking limit
The Focinator v2-0 - Graphical Interface, Four Channels, Colocalization Analysis and Cell Phase Identification.

Science.gov (United States)

Oeck, Sebastian; Malewicz, Nathalie M; Hurst, Sebastian; Al-Refae, Klaudia; Krysztofiak, Adam; Jendrossek, Verena

2017-07-01

The quantitative analysis of foci plays an important role in various cell biological methods. In the fields of radiation biology and experimental oncology, the effect of ionizing radiation, chemotherapy or molecularly targeted drugs on DNA damage induction and repair is frequently performed by the analysis of protein clusters or phosphorylated proteins recruited to so called repair foci at DNA damage sites, involving for example γ-H2A.X, 53BP1 or RAD51. We recently developed "The Focinator" as a reliable and fast tool for automated quantitative and qualitative analysis of nuclei and DNA damage foci. The refined software is now even more user-friendly due to a graphical interface and further features. Thus, we included an R-script-based mode for automated image opening, file naming, progress monitoring and an error report. Consequently, the evaluation no longer required the attendance of the operator after initial parameter definition. Moreover, the Focinator v2-0 is now able to perform multi-channel analysis of four channels and evaluation of protein-protein colocalization by comparison of up to three foci channels. This enables for example the quantification of foci in cells of a specific cell cycle phase.
Numerical and Experimental Study of Ti6Al4V Components Manufactured Using Powder Bed Fusion Additive Manufacturing

Science.gov (United States)

Zielinski, Jonas; Mindt, Hans-Wilfried; Düchting, Jan; Schleifenbaum, Johannes Henrich; Megahed, Mustafa

2017-12-01

Powder bed fusion additive manufacturing of titanium alloys is an interesting manufacturing route for many applications requiring high material strength combined with geometric complexity. Managing powder bed fusion challenges, including porosity, surface finish, distortions and residual stresses of as-built material, is the key to bringing the advantages of this process to production main stream. This paper discusses the application of experimental and numerical analysis towards optimizing the manufacturing process of a demonstration component. Powder characterization including assessment of the reusability, assessment of material consolidation and process window optimization is pursued prior to applying the identified optima to study the distortion and residual stresses of the demonstrator. Comparisons of numerical predictions with measurements show good correlations along the complete numerical chain.
Synthesis of [64Cu]DOTA-ADIBON3-Ala-PEG28-A20FMDV2 via copper-free click chemistry for PET imaging of integrin αvβ6

International Nuclear Information System (INIS)

Drishty Satpati; Nadine Bauer; Hausner, S.H.

2014-01-01

Catalyst-free click reactions are effective chemical tools for synthesis of radiometal-based radiopharmaceuticals offering advantages towards preparation of non-toxic agents with high specific activity. In the present study the radiotracer [ 64 Cu]DOTA-ADIBON 3 -Ala-PEG 28 -A20FMDV2, [ 64 Cu]3, was synthesized for positron emission tomography imaging of integrin α v β 6 expressing tumors via a strain-promoted click reaction using both a 'pre-click' and 'post-click' approaches. The radiotracer, prepared in >99 % radiochemical yield, was evaluated in vitro (64.6 ± 2.8 % binding to α v β 6 -positive cells vs. v β 6 -negative cells) and in vivo (α v β 6 -positive tumor uptake: 1.52 ± 0.16 % ID/g, 24 h p.i.). While the high initial renal uptake (76.2 ± 10.7 % ID/g at 1 h p.i.) was comparable to a previously reported radiotracer, [ 64 Cu]DOTA-PEG 28 -A20FMDV2, [ 64 Cu]3 showed notably improved renal clearance (11.3 ± 2.5 % ID/g at 24 h p.i.). Thus, the introduction of a chelator-strained alkyne system resulted in improved pharmacokinetics for the present radiotracer, highlighting the attractive prospects of strain-promoted click-based preparations in the construction of radiometalated bioconjugates for targeted molecular imaging and therapy. (author)
Enhance heat transfer in the channel with V-shaped wavy lower plate using liquid nanofluids

Directory of Open Access Journals (Sweden)

Azher M. Abed

2015-03-01

Full Text Available The heat transfer and flow characteristics in corrugated with V-shape lower plate using nanofluids are numerically studied. The computations are performed on uniform heat flux over a range of Reynolds number (Re 8000–20,000. The governing equations are numerically solved in the domain by a finite volume method (FVM using the k–ε standard turbulent model. Studies are carried out for different types of nanoparticles Al2O3,CuO, SiO2 and ZnO with different volume fractions in the range of 0–4%. Three different types of base fluid (water, glycerin, ethylene glycol are also examined. Results indicated that the average Nusselt number for nanofluids is greater than that of the base liquid. The SiO2 nanofluid yields the best heat transfer enhancement among all other type of nanofluids. Heat transfer enhancement increase with increases the volumetric concentration, but it is accompanied by increasing pressure drop values. Moreover, the average Nusselt number increases with an increase in Reynolds number and volume concentration. The SiO2–glycerin nanofluid has the highest Nusselt number compared with other base fluids. The present study shows that these V-shaped wavy channels have advantages by using nanofluids and thus serve as promising candidates for incorporation into efficient heat transfer devices.
Numerical relativity

CERN Document Server

Shibata, Masaru

2016-01-01

This book is composed of two parts: First part describes basics in numerical relativity, that is, the formulations and methods for a solution of Einstein's equation and general relativistic matter field equations. This part will be helpful for beginners of numerical relativity who would like to understand the content of numerical relativity and its background. The second part focuses on the application of numerical relativity. A wide variety of scientific numerical results are introduced focusing in particular on the merger of binary neutron stars and black holes.
Numerical analysis

CERN Document Server

Khabaza, I M

1960-01-01

Numerical Analysis is an elementary introduction to numerical analysis, its applications, limitations, and pitfalls. Methods suitable for digital computers are emphasized, but some desk computations are also described. Topics covered range from the use of digital computers in numerical work to errors in computations using desk machines, finite difference methods, and numerical solution of ordinary differential equations. This book is comprised of eight chapters and begins with an overview of the importance of digital computers in numerical analysis, followed by a discussion on errors in comput
Steam oxidation of X20CrMoV121: Comparison of laboratory exposures and in situ exposure in power plants

DEFF Research Database (Denmark)

Montgomery, M.; Hansson, A. N.; Vilhelmsen, T.

2012-01-01

X20CrMoV121 is a 12% Cr martensitic steel which has been used in power plants in Europe for many decades. Specimens have been removed from superheater tubes to investigate long‐term exposure with respect to steam oxidation. These tubes have been exposed for various durations up to 135 000 h...... in power plants in Denmark at steam temperatures varying from 450–565 °C. This paper collates the data, compares oxide morphologies and assesses to what extent parabolic kinetics can be used to describe the oxidation rate. The steam oxidation behaviour has been investigated in the laboratory in an Ar‐46%H2...
Measurements of e p →e'π+n at 1.6 2.0 GeV and extraction of nucleon resonance electrocouplings at CLAS

Science.gov (United States)

Park, K.; Aznauryan, I. G.; Burkert, V. D.; Adhikari, K. P.; Amaryan, M. J.; Pereira, S. Anefalos; Avakian, H.; Battaglieri, M.; Badui, R.; Bedlinskiy, I.; Biselli, A. S.; Bono, J.; Briscoe, W. J.; Brooks, W. K.; Carman, D. S.; Celentano, A.; Chandavar, S.; Charles, G.; Colaneri, L.; Cole, P. L.; Contalbrigo, M.; Cortes, O.; Crede, V.; D'Angelo, A.; Dashyan, N.; De Vita, R.; De Sanctis, E.; Deur, A.; Djalali, C.; Doughty, D.; Dupre, R.; Egiyan, H.; Alaoui, A. El; Elouadrhiri, L.; Fassi, L. El; Eugenio, P.; Fedotov, G.; Fegan, S.; Fersch, R.; Filippi, A.; Fleming, J. A.; Garillon, B.; Garçon, M.; Gevorgyan, N.; Gilfoyle, G. P.; Giovanetti, K. L.; Girod, F. X.; Joo, H. S.; Goetz, J. T.; Golovatch, E.; Gothe, R. W.; Griffioen, K. A.; Guegan, B.; Guidal, M.; Guo, L.; Hakobyan, H.; Hanretty, C.; Hattawy, M.; Hicks, K.; Holtrop, M.; Hughes, S. M.; Hyde, C. E.; Ilieva, Y.; Ireland, D. G.; Ishkhanov, B. S.; Isupov, E. L.; Jenkins, D.; Jiang, H.; Jo, H. S.; Joo, K.; Joosten, S.; Keller, D.; Khandaker, M.; Kim, A.; Kim, W.; Klein, A.; Klein, F. J.; Kubarovsky, V.; Kuhn, S. E.; Kuleshov, S. V.; Lenisa, P.; Livingston, K.; Lu, H. Y.; MacGregor, I. J. D.; Markov, N.; Martinez, D.; McKinnon, B.; Mokeev, V.; Montgomery, R. A.; Moutarde, H.; Camacho, C. Munoz; Nadel-Turonski, P.; Niccolai, S.; Niculescu, G.; Niculescu, I.; Osipenko, M.; Ostrovidov, A. I.; Paolone, M.; Pasyuk, E.; Peng, P.; Phelps, W.; Phillips, J. J.; Pisano, S.; Pogorelko, O.; Price, J. W.; Procureur, S.; Prok, Y.; Protopopescu, D.; Puckett, A. J. R.; Raue, B. A.; Ripani, M.; Rizzo, A.; Rosner, G.; Rossi, P.; Roy, P.; Sabatié, F.; Salgado, C.; Schott, D.; Schumacher, R. A.; Seder, E.; Sharabian, Y. G.; Simonyan, A.; Skorodumina, Iu.; Smith, E. S.; Smith, G. D.; Sparveris, N.; Stoler, P.; Strakovsky, I. I.; Strauch, S.; Sytnik, V.; Taiuti, M.; Tang, W.; Taylor, C. E.; Tian, Ye; Trivedi, A.; Ungaro, M.; Voskanyan, H.; Voutier, E.; Walford, N. K.; Watts, D. P.; Wei, X.; Weinstein, L. B.; Wood, M. H.; Zachariou, N.; Zana, L.; Zhang, J.; Zhao, Z. W.; Zonta, I.; CLAS Collaboration

2015-04-01

Differential cross sections of the exclusive process e p →e'π+n were measured with good precision in the range of the photon virtuality Q2=1.8 -4.5 GeV2 and the invariant mass range of the π+n final state W =1.6 -2.0 GeV using the Continuous Electron Beam Accelerator Facility Large Acceptance Spectrometer. Data were collected with nearly complete coverage in the azimuthal and polar angles of the n π+ center-of-mass system. More than 37 000 cross-section points were measured. The contributions of the isospin I =1/2 resonances N (1675 ) 5/2-,N (1680 ) 5/2+ , and N (1710 ) 1/2+ were extracted at different values of Q2 using a single-channel, energy-dependent resonance amplitude analysis. Two different approaches, the unitary isobar model and the fixed-t dispersion relations, were employed in the analysis. We observe significant strength of the N (1675 ) 5/2- in the A1 /2 amplitude, which is in strong disagreement with quark models that predict both transverse amplitudes to be strongly suppressed. For the N (1680 ) 5/2+ we observe a slow changeover from the dominance of the A3 /2 amplitude at the real photon point (Q2=0 ) to a Q2 where A1 /2 begins to dominate. The scalar amplitude S1 /2 drops rapidly with Q2 consistent with quark model prediction. For the N (1710 ) 1/2+ resonance our analysis shows significant strength for the A1 /2 amplitude at Q2<2.5 GeV2.
Kilingi-Nõmme on miljööväärtuslik väikelinn / Tõnu Kann

Index Scriptorium Estoniae

Kann, Tõnu, 1957-

2009-01-01

Tõnu Kanni ja Henn Soodla kuues matk Pärnumaa 20. sajandi väärtarhitektuuri jälgedes, kaasas kunstiteadlane Epp Lankots, kes leidis Kilingi-Nõmmel kuus hoonet, mida ta pakub riikliku kultuurimälestisena kaitse alla võtta. Üks neist Konstantin Meyeri projekti järgi ehitatud funktsionalistlik villa
Elastic scattering of charged mesons, antiprotons and protons on protons at incident momenta of 20, 30 and 50 GeV/c in the momentum tranfer range 0. 5 <= -t < 8 (GeV/c)/sup 2/

Energy Technology Data Exchange (ETDEWEB)

Asa' d, Z.; Coupland, M.; Davis, D.G.; Duff, B.G.; Fearnley, T.; Heymann, F.F.; Imrie, D.C.; Lush, G.J.; Phillips, M. (University Coll., London (UK)); Baglin, C.

1985-06-24

Results are presented from experiment WA7 at the CERN SPS, which has measured the elastic differential cross sections of ..pi..sup(+-)p, Ksup(+-)p, anti pp and pp at incident momenta of 20, 30 and 50 GeV/c. The measurements cover the momentum transfer range 0.5 < vertical stroketvertical stroke < 8 (GeV/c)/sup 2/, corresponding to c.m. scattering angles between 10/sup 0/ and 50/sup 0/. The experimental set-up, trigger logic and data analysis are described. The experimental results are compared with existing meson-proton and nucleon-proton data at lower and higher energies covering the medium- and large-vertical stroketvertical stroke region. Some prominent models and their predictions for elastic scattering at WA7 energies and beyond are reviewed, with emphasis on geometrical scaling, factorizing eikonal models, lowest-order QCD and other dynamical exchange-type models. Results for anti pp two-body annihilation into ..pi../sup -/..pi../sup +/ and K/sup -/K/sup +/ at 30 and 50 GeV/c, obtained in parallel with the elastic anti pp data, are also presented.
WEBnm@ v2.0: Web server and services for comparing protein flexibility.

Science.gov (United States)

Tiwari, Sandhya P; Fuglebakk, Edvin; Hollup, Siv M; Skjærven, Lars; Cragnolini, Tristan; Grindhaug, Svenn H; Tekle, Kidane M; Reuter, Nathalie

2014-12-30

Normal mode analysis (NMA) using elastic network models is a reliable and cost-effective computational method to characterise protein flexibility and by extension, their dynamics. Further insight into the dynamics-function relationship can be gained by comparing protein motions between protein homologs and functional classifications. This can be achieved by comparing normal modes obtained from sets of evolutionary related proteins. We have developed an automated tool for comparative NMA of a set of pre-aligned protein structures. The user can submit a sequence alignment in the FASTA format and the corresponding coordinate files in the Protein Data Bank (PDB) format. The computed normalised squared atomic fluctuations and atomic deformation energies of the submitted structures can be easily compared on graphs provided by the web user interface. The web server provides pairwise comparison of the dynamics of all proteins included in the submitted set using two measures: the Root Mean Squared Inner Product and the Bhattacharyya Coefficient. The Comparative Analysis has been implemented on our web server for NMA, WEBnm@, which also provides recently upgraded functionality for NMA of single protein structures. This includes new visualisations of protein motion, visualisation of inter-residue correlations and the analysis of conformational change using the overlap analysis. In addition, programmatic access to WEBnm@ is now available through a SOAP-based web service. Webnm@ is available at http://apps.cbu.uib.no/webnma . WEBnm@ v2.0 is an online tool offering unique capability for comparative NMA on multiple protein structures. Along with a convenient web interface, powerful computing resources, and several methods for mode analyses, WEBnm@ facilitates the assessment of protein flexibility within protein families and superfamilies. These analyses can give a good view of how the structures move and how the flexibility is conserved over the different structures.

Numerical study of read scheme in one-selector one-resistor crossbar array

Science.gov (United States)

Kim, Sungho; Kim, Hee-Dong; Choi, Sung-Jin

2015-12-01

A comprehensive numerical circuit analysis of read schemes of a one selector-one resistance change memory (1S1R) crossbar array is carried out. Three schemes-the ground, V/2, and V/3 schemes-are compared with each other in terms of sensing margin and power consumption. Without the aid of a complex analytical approach or SPICE-based simulation, a simple numerical iteration method is developed to simulate entire current flows and node voltages within a crossbar array. Understanding such phenomena is essential in successfully evaluating the electrical specifications of selectors for suppressing intrinsic drawbacks of crossbar arrays, such as sneaky current paths and series line resistance problems. This method provides a quantitative tool for the accurate analysis of crossbar arrays and provides guidelines for developing an optimal read scheme, array configuration, and selector device specifications.
Development and validation of the nasopharyngeal cancer scale among the system of quality of life instruments for cancer patients (QLICP-NA V2.0): combined classical test theory and generalizability theory.

Science.gov (United States)

Wu, Jiayuan; Hu, Liren; Zhang, Gaohua; Liang, Qilian; Meng, Qiong; Wan, Chonghua

2016-08-01

This research was designed to develop a nasopharyngeal cancer (NPC) scale based on quality of life (QOL) instruments for cancer patients (QLICP-NA). This scale was developed by using a modular approach and was evaluated by classical test and generalizability theories. Programmed decision procedures and theories on instrument development were applied to create QLICP-NA V2.0. A total of 121 NPC inpatients were assessed using QLICP-NA V2.0 to measure their QOL data from hospital admission until discharge. Scale validity, reliability, and responsiveness were evaluated by correlation, factor, parallel, multi-trait scaling, and t test analyses, as well as by generalizability (G) and decision (D) studies of the generalizability theory. Results of multi-trait scaling, correlation, factor, and parallel analyses indicated that QLICP-NA V2.0 exhibited good construct validity. The significant difference of QOL between the treated and untreated NPC patients indicated a good clinical validity of the questionnaire. The internal consistency (α) and test-retest reliability coefficients (intra-class correlations) of each domain, as well as the overall scale, were all >0.70. Ceiling effects were not found in all domains and most facets, except for common side effects (24.8 %) in the domain of common symptoms and side effects, tumor early symptoms (27.3 %) and therapeutic side effects (23.2 %) in specific domain, whereas floor effects did not exist in each domain/facet. The overall changes in the physical and social domains were significantly different between pre- and post-treatments with a moderate effective size (standard response mean) ranging from 0.21 to 0.27 (p theory. QLICP-NA V2.0 exhibited reasonable degrees of validity, reliability, and responsiveness. However, this scale must be further improved before it can be used as a practical instrument to evaluate the QOL of NPC patients in China.
PLESNO IZRAŽANJE V DRAMSKI UMETNOSTI

OpenAIRE

Poslek, Lucija

2012-01-01

V tem diplomskem delu je predstavljeno, kako se lahko ples izrazi v dramski umetnosti. Podrobneje je predstavljen razvoj plesa v zgodovinskem obdobju s poudarkom na 20. stoletju in kako je bil ples v zgodovini izražen kot oblika umetnosti. Pomemben poudarek je tudi na pomenu plesne vzgoje in na načinih, s katerimi lahko predšolskim otrokom približamo plesno umetnost in pomen plesa. Z namenom lažjega razumevanja pomena plesnega ustvarjanja v dramski umetnosti je slednja tudi natančneje predsta...
Metamagnetism, sign reversal and low temperature magnetocaloric effect in single-crystalline EuV2Al20

Science.gov (United States)

Ramesh Kumar, K.; Nair, Harikrishnan S.; Bhattacharyya, A.; Thamizhavel, A.; Strydom, André M.

2018-04-01

The Frank-Kasper cage compound EuV2Al20 crystallizes in the cubic structure with Fd 3 ‾ m space group and exhibits unusual magnetic and transport properties. The system undergoes an antiferromagnetic transition below 5.6 K wherein the Eu2+ moments are aligned anti-parallel along 〈1 1 1〉 direction and the system exhibits a weak metamagetic transition at the field of 1 T. Arrott plots (M2 vs H / M) show a "S" shaped variation in the low fields below TN and the plausible reason for the occurrence of negative slope is discussed. Isothermal magnetic entropy change is estimated from both magnetization and heat capacity measurements invoking the Maxwell's thermodynamic relations. Temperature variation of ΔSm showed a weak negative minimum and a sign reversal at the field value of 1 T due to field induced metamagnetic transition. Universal master curve is constructed by rescaling the ΔSm vs T curves in the context of analysing the nature of the magnetic transition.
Mechanism of the Dual Activities of Human CYP17A1 and Binding to Anti-Prostate Cancer Drug Abiraterone Revealed by a Novel V366M Mutation Causing 17,20 Lyase Deficiency

Directory of Open Access Journals (Sweden)

Mónica Fernández-Cancio

2018-04-01

Full Text Available The CYP17A1 gene regulates sex steroid biosynthesis in humans through 17α-hydroxylase/17,20 lyase activities and is a target of anti-prostate cancer drug abiraterone. In a 46, XY patient with female external genitalia, together with a loss of function mutation S441P, we identified a novel missense mutation V366M at the catalytic center of CYP17A1 which preferentially impaired 17,20 lyase activity. Kinetic experiments with bacterially expressed proteins revealed that V366M mutant enzyme can bind and metabolize pregnenolone to 17OH-pregnenolone, but 17OH-pregnenolone binding and conversion to dehydroepiandrosterone (DHEA was impaired, explaining the patient’s steroid profile. Abiraterone could not bind and inhibit the 17α-hydroxylase activity of the CYP17A1-V366M mutant. Molecular dynamics (MD simulations showed that V366M creates a “one-way valve” and suggests a mechanism for dual activities of human CYP17A1 where, after the conversion of pregnenolone to 17OH-pregnenolone, the product exits the active site and re-enters for conversion to dehydroepiandrosterone. The V366M mutant also explained the effectiveness of the anti-prostate cancer drug abiraterone as a potent inhibitor of CYP17A1 by binding tightly at the active site in the WT enzyme. The V366M is the first human mutation to be described at the active site of CYP17A1 that causes isolated 17,20 lyase deficiency. Knowledge about the specificity of CYP17A1 activities is of importance for the development of treatments for polycystic ovary syndrome and inhibitors for prostate cancer therapy.
Numerical investigation of beam-driven PWFA in quasi-nonlinear regime

International Nuclear Information System (INIS)

Londrillo, P.; Gatti, C.; Ferrario, M.

2014-01-01

In beam-driven Plasma Based Wakefield Acceleration (PWFA), the quasi-nonlinear model has been designed to combine high efficient ‘blowout’ regimes, where cold and overdense driving electron beams form a totally rarefied plasma channel, with low charge beam distribution assuring the excited wakefield preserves relevant linear properties. This scheme can have applications in experimental facilities, like SPARC 150 MeV linac at LNF-INFN laboratories, where low-emittance, low-charge narrow electron beams can be produced to be injected on a preformed plasma channel. Here we present a preliminary numerical investigation of this configuration, using the fully 3D ALaDyn PIC code, as a preparatory work to design optimal conditions for the COMB experimental set-up. Specific numerical tools, having computational and diagnostic advantages in PWFA conditions and checks of the numerical outcomes with analytical results, are also presented and discussed
Validation of ASTEC v2.0 corium jet fragmentation model using FARO experiments

International Nuclear Information System (INIS)

Hermsmeyer, S.; Pla, P.; Sangiorgi, M.

2015-01-01

Highlights: • Model validation base extended to six FARO experiments. • Focus on the calculation of the fragmented particle diameter. • Capability and limits of the ASTEC fragmentation model. • Sensitivity analysis of model outputs. - Abstract: ASTEC is an integral code for the prediction of Severe Accidents in Nuclear Power Plants. As such, it needs to cover all physical processes that could occur during accident progression, yet keeping its models simple enough for the ensemble to stay manageable and produce results within an acceptable time. The present paper is concerned with the validation of the Corium jet fragmentation model of ASTEC v2.0 rev3 by means of a selection of six experiments carried out within the FARO facility. The different conditions applied within these six experiments help to analyse the model behaviour in different situations and to expose model limits. In addition to comparing model outputs with experimental measurements, sensitivity analyses are applied to investigate the model. Results of the paper are (i) validation runs, accompanied by an identification of situations where the implemented fragmentation model does not match the experiments well, and discussion of results; (ii) its special attention to the models calculating the diameter of fragmented particles, the identification of a fault in one model implemented, and the discussion of simplification and ad hoc modification to improve the model fit; and, (iii) an investigation of the sensitivity of predictions towards inputs and parameters. In this way, the paper offers a thorough investigation of the merit and limitation of the fragmentation model used in ASTEC
deepBase v2.0: identification, expression, evolution and function of small RNAs, LncRNAs and circular RNAs from deep-sequencing data.

Science.gov (United States)

Zheng, Ling-Ling; Li, Jun-Hao; Wu, Jie; Sun, Wen-Ju; Liu, Shun; Wang, Ze-Lin; Zhou, Hui; Yang, Jian-Hua; Qu, Liang-Hu

2016-01-04

Small non-coding RNAs (e.g. miRNAs) and long non-coding RNAs (e.g. lincRNAs and circRNAs) are emerging as key regulators of various cellular processes. However, only a very small fraction of these enigmatic RNAs have been well functionally characterized. In this study, we describe deepBase v2.0 (http://biocenter.sysu.edu.cn/deepBase/), an updated platform, to decode evolution, expression patterns and functions of diverse ncRNAs across 19 species. deepBase v2.0 has been updated to provide the most comprehensive collection of ncRNA-derived small RNAs generated from 588 sRNA-Seq datasets. Moreover, we developed a pipeline named lncSeeker to identify 176 680 high-confidence lncRNAs from 14 species. Temporal and spatial expression patterns of various ncRNAs were profiled. We identified approximately 24 280 primate-specific, 5193 rodent-specific lncRNAs, and 55 highly conserved lncRNA orthologs between human and zebrafish. We annotated 14 867 human circRNAs, 1260 of which are orthologous to mouse circRNAs. By combining expression profiles and functional genomic annotations, we developed lncFunction web-server to predict the function of lncRNAs based on protein-lncRNA co-expression networks. This study is expected to provide considerable resources to facilitate future experimental studies and to uncover ncRNA functions. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.
Mathematical and numerical aspects of low mach number flows

Energy Technology Data Exchange (ETDEWEB)

Schochet, St.; Bresch, D.; Grenier, E.; Alazard, T.; Gordner, A.; Sankaran, V.; Massot, M.; Sery, R.; Pebay, P.; Lunch, O.; Mazhorova, O.; Turkel, O.E.; Faille, I.; Danchin, R.; Allain, O.; Birken, P.; Lafitte, O.; Kloczko, T.; Frick, W.; Bui, T.; Dellacherie, S.; Klein, R.; Roe, Ph.; Accary, G.; Braack, M.; Picano, F.; Cadiou, A.; Dinescu, C.; Lesage, A.C.; Wesseling, P.; Heuveline, V.; Jobelin, M.; Weisman, C.; Merkle, C.

2004-07-01

diphasic system (S. DELLACHERIE); a preconditioning technique for biphasic flows with interfaces (C. DINESCU, B. LEONARD, C. HIRSCH); two models for the simulation of multiphase flows in oil and gas pipelines (I. FAILLE); physics and insects require compressible low Mach number flow (W. FRICK); multigrid for low mach number flows including acoustic modes (A. GORDNER); adaptive finite element method for low mach number flows (V. HEUVELINE); using multiple scales asymptotics in the construction of low Mach number numerics (R. KLEIN); a matrix-free implicit method for flows at all speeds (T. KLOCZKO, A. BECCANTINI, C. CORRE); linear growth rate for the quasi-isobaric ablation front model of Kull-Anisimov (O. LAFITTE); augmented projection methods for incompressible and dilatable flows (J. CLATCHE, M. JOBELIN, C. LAPUERTA, P. ANGOT, B. PIAR); a numerical accuracy study for level set formulations (A.C. LESAGE, O. ALLAIN, A. DERVIEUX) 3D computer simulation of convective instability in the multicomponent solution (O. MAZHOROVA, V. KOLMYCHKOV, Y. POPOV, P. BONTOUX, M. El GANAOUI); multicomponent reactive flows: symmetrization and the low Mach number limit (M. MASSOT, V. GIOVANGIGLI); computation of low mach number flows with a generalized Gibbs relation (C.L. MERKLE, V. SANKARAN, D. LI); a Mach-uniform pressure correction algorithm (K. NERINCK, J. VIERENDEELS, E. DICK); application of Turkel preconditioning method in external free convection and incompressible flows (T.H. NGUYEN-BUI, B. DUBROCA, P.H. MAIRE); a half-explicit, non-split projection method for low mach number flows (P.P. PEBAY, H. N. NAJIM, J. POUSIN); combustion in low Mach number isotropic turbulence (F. PICANO, P. GUALTIERI, B. FAVINI); calculation of low Mach number acoustics: a comparison of MPV, EIF and linearized Euler equations (S. ROLLER, T. SCHWARTKOFF, M. DUMBSER, C.D. MUNZ) comparison of pressure-based and density-based methods for low Mach number CFD computations (V. SANKARAN, C. MERKLE); the
Experimental and Numerical Study of Twin Underexpanded Impinging Jets

Institute of Scientific and Technical Information of China (English)

Minoru Yaga; Minoru Okano; Masumi Tamashiro; Kenyu Oyakawa

2003-01-01

In this paper, the dual underexpanded impinging jets are experimentally and numerically studied. The experiments were performed by measuring the unsteady and averaged wall static pressures and by visualizing density fields using schlieren method. Numerical calculations were also conducted by solving unsteady three dimensional compressible Navier-Stokes equations with Baldwin-Lomax turbulence model. The main parameters for the dual jets are the non-dimensional distance between the two nozzle centers H/D covering 1.5, 2.0, the nozzle to plate separation L/D 2.0, 3.0,4.0 and 5.0 and the pressure ratio defined by Po/Pb 1.0～6.0, where D is the diameter of each nozzle exit, Po the stagnation pressure and Pb the back pressure. It is found that the agreement between the experiments and the calculations is good. The fountain flow at the middle of the two jets is observed both in the experiments and the calculation. According to FFT analysis of the experiments for the twin jets,relatively low frequency (up to 5 kHz) is dominant for H/D =1.5, L/D =2.0 and pressure ratio Po/Pb =3.0 and 5.0,which is confirmed by the experiments.
Bis(tetraphenylphosphonium) tetracyanidonitridochromate(V) dihydrate

DEFF Research Database (Denmark)

Schau-Magnussen, Magnus; Bendix, Jesper

2011-01-01

In the title compound, (C 24 H 20 P) 2 [Cr(CN) 4 (N)]·2H 2 O, the complex anion exhibits a square-based pyramidal geometry around the central Cr V atom, which is coordinated by a nitride ligand in the apical position and by four cyanide ligands in the equatorial plane. The ......In the title compound, (C 24 H 20 P) 2 [Cr(CN) 4 (N)]·2H 2 O, the complex anion exhibits a square-based pyramidal geometry around the central Cr V atom, which is coordinated by a nitride ligand in the apical position and by four cyanide ligands in the equatorial plane. The ...
β-delayed γ decay of 20Mg and the 19Ne(p , γ) 20 Na breakout reaction in Type I X-ray bursts

Science.gov (United States)

Glassman, B. E.; Pérez-Loureiro, D.; Wrede, C.; Allen, J.; Bardayan, D. W.; Bennett, M. B.; Brown, B. A.; Chipps, K. A.; Febbraro, M.; Friedman, M.; Fry, C.; Hall, M. R.; Hall, O.; Liddick, S. N.; O'Malley, P.; Ong, W. J.; Pain, S. D.; Prokop, C.; Schwartz, S. B.; Shidling, P.; Sims, H.; Thompson, P.; Zhang, H.

2018-03-01

Certain astrophysical environments such as thermonuclear outbursts on accreting neutron stars (Type-I X-ray bursts) are hot enough to allow for breakout from the Hot CNO hydrogen burning cycles to the rapid proton capture (rp) process. An important breakout reaction sequence is 15O(α,γ)19Ne(p,γ)20Na and the 19Ne(p,γ)20Na reaction rate is expected to be dominated by a single resonance at 457 keV above the proton threshold in 20Na. The resonance strength and, hence, reaction rate depends strongly on whether this 20Na state at an excitation energy of 2647 keV has spin and parity of 1+ or 3+. Previous 20Mg (Jπ =0+) β+ decay experiments have relied almost entirely on searches for β-delayed proton emission from this resonance in 20Na to limit the log ft value and, hence, Jπ. However there is a non-negligible γ-ray branch expected that must also be limited experimentally to determine the log ft value and constrain Jπ. We have measured the β-delayed γ decay of 20Mg to complement previous β-delayed proton decay work and provide the first complete limit based on all energetically allowed decay channels through the 2647 keV state. Our limit confirms that a 1+ assignment for this state is highly unlikely.
Sb{sup III} - Sb{sup V} Exchange Reaction in Hydrochloric: Acid Solutions; Echange Sb{sup III}-Sb{sup V} dans des Solutions d'Acide Chlorhydrique; Reaktsiya obmena Sb(III) - Sb(V) v rastvorakh khloristovodorodnoj kisloty; Intercambio Sb{sup III}-Sb{sup V} en Soluciones de HCl

Energy Technology Data Exchange (ETDEWEB)

Kambara, T.; Yamaguchi, K.; Yasuba, S. [Shizuoka University, Shizuoka City (Japan)

1965-10-15

The exchange reaction of Sb{sup III} - Sb{sup V} in solutions of low HCl concentrations was studied using {sup 124}Sb as a tracer. The effects of HCl concentrations and chemical forms of antimony on the exchange rate were investigated. The HCl concentrations of the antimony solutions ((Sb{sup III}) =(Sb{sup V}) = 6.8 x 10{sup -4}M) were changed from 0.8 to 4.0M and the half-time for the exchange was measured by plotting log (1 - F) versus time t to calculate the exchange rate assuming the second-ordet reaction. It was found that the exchange rate was sharply increased with the increase of HCl concentrations (at 25 Degree-Sign C, from 0.8 to 2.0M) and at 2.0M HCl concentration the rate reached the maximum, from which the rate was decreased with the increase of HCl concentrations (at 25 Degree-Sign C, from 2.0 to 4.0M). Two sorts of Sb{sup V} species were used for our investigations, i.e. one was used directly after the dilution of 10M HCl Sb{sup V} solution with water and the other was used after 24 hours standing at room temperature from the dilution. (The Sb{sup III} species were also kept standing after preparation from 10M HCl Sb{sup III} solution.) In both cases the maximum rates were found to exist at 2.0M HCl concentration. The rate R{sub 1} for the former (directly after dilution) was 4.5 x 10{sup -6} mole litre{sup -1} min{sup -1} and the rate R{sub 2} for the latter (24 hours standing) was 1.2 x 10{sup -}{sub 6} mole litre. Also the activation energy for these cases was found to be 12.2 kcal/mole and 19.1 kcal/mole. By spectrophotometric studies, the Sb{sup V} species of the former type were found to be mainly consisting of SbCl{sup -}{sub 6} and the species of the latter type to be of SbCl{sub 4}(OH){sup -}{sub 2}, etc. Besides these facts the form of Sb{sup III} species was found to have no influence on the exchange rate. A much sharper increase of the exchange rate was observed when the HCl concentration of the antimony solution was fixed at 0.8M and
Event-by-event fluctuations of the particle yield ratios in heavy-ion collisions at 20 - 158 AGeV

Energy Technology Data Exchange (ETDEWEB)

Kresan, Dmytro

2010-12-22

Non-statistical event-by-event fluctuations are considered as an important signal for the critical endpoint of the QCD phase diagram. Event-by-event fluctuations of different observables are thus investigated in detail in current experiments but are also an important observable to be studied at the future CBM experiment at FAIR. In this work we present the energy and centrality dependence of event-by-event fluctuations of particle yield ratios measured by the NA49 experiment in Pb+Pb collisions at 20-158 AGeV. Systematic studies of the influence of the dE/dx resolution on the particle identification and the centrality bin size were performed. Results can be compared to event-by-event fluctuations measured by NA49 for different observables such as or the mean charged particle multiplicity. Main results of these studies are an increase of absolute value of the dynamical particle ratio fluctuations with decreasing centrality for all considered ratios, saturation of the K/{pi} and K/p ratio fluctuations for peripheral Pb + Pb collisions at 158A GeV and scaling of the energy and centrality dependences of the p/{pi} ratio fluctuations with N{sub p}N{sub {pi}}. The measured energy and centrality dependences of the K/{pi} and K/p ratio fluctuations scale with N{sub K} in a different way. The saturation of the mentioned ratios fluctuations was attributed to the development of pronounced spike at zero in the eventwise ratio distributions, which, as was shown by Monte Carlo simulations, influence the measured fluctuations in the very peripheral Pb + Pb collisions at 158A GeV. In future, the CBM experiment at FAIR will investigate the intermediate region of the QCD phase diagram in great detail searching for the first order phase transition line and the expected critical endpoint. It is therefore important to closely investigate its sensitivity towards particle ratio fluctuations in Au+Au collisions at 10-45 AGeV beam energy. Detailed simulation studies are
Cross-sections of {sup 45}Sc(n,2n){sup 44m,g}Sc reaction from the reaction threshold to 20 MeV

Energy Technology Data Exchange (ETDEWEB)

Luo, J. [Hexi Univ., Zhangye (China). School of Physics and Electromechanical Engineering; Peking Univ., Beijing (China). State Key Laboratory of Nuclear Physics and Technology; Liu, R.; Jiang, L. [Chinese Academy of Engineering Physics, Mianyang (China). Inst. of Nuclear Physics and Chemistry; Liu, Z.; Sun, G.; Ge, S. [Hexi Univ., Zhangye (China). School of Physics and Electromechanical Engineering

2013-07-01

Cross sections of {sup 45}Sc(n,2n){sup 44m,g}Sc reactions and their isomeric cross section ratios {sigma}{sub m}/{sigma}{sub g} have been measured at three neutron energies between 13.5 and 14.8 MeV using the activation technique. The pure cross section of the groundstate was then obtained by utilizing the absolute cross section of the metastable state and analysis methods of residual nuclear decay. The monoenergetic neutron beam was produced via the {sup 3}H(d, n){sup 4}He reaction. The cross sections were also estimated with the TALYS-1.2 nuclear model code using different level density options, at neutron energies varying from the reaction threshold to 20 MeV. Results are also discussed and compared with some corresponding values found in the literature. (orig.)
Review of numerical simulation of capillary tube using refrigerant mixtures

Energy Technology Data Exchange (ETDEWEB)

Garcia-Valladares, O. [Centro de Investigacion en Energia de la UNAM, Morelos (Mexico)

2004-05-01

A detailed one-dimensional steady and transient state numerical simulation of the thermal and fluid-dynamic behaviour of capillary tube expansion devices considering metastable region and working with pure and mixed refrigerants has been developed and presented in previous works [Appl. Therm. Eng. 22 (2002) 173; Appl. Therm. Eng. 22 (2002) 379]. The discretized governing equations are coupled using an implicit step-by-step method. Due to the changes observed in the thermo-physical properties of mixtures using REFPROP v7.0 [Reference Fluid Thermodynamic and Transport Properties, NIST Standard Reference Database 23, Gaithersburg, MD 20899, USA, 2002] compared to REFPROP v5.0 [NIST Thermodynamic Properties of Refrigerants and Refrigerant Mixtures Database, Standard Reference Data Program, Gaithersburg, MD 20899, USA (February 1996)]; an extensive comparison of the numerical simulation developed with experimental data presented in the technical literature will be shown in order to demonstrate the accuracy of this detailed model. Finally, refrigerant-specific rating charts to predict in an easy way R-407C flow rates through adiabatic capillary tube are shown and used. (author)
Review of numerical simulation of capillary tube using refrigerant mixtures

International Nuclear Information System (INIS)

Garcia-Valladares, O.

2004-01-01

A detailed one-dimensional steady and transient state numerical simulation of the thermal and fluid-dynamic behaviour of capillary tube expansion devices considering metastable region and working with pure and mixed refrigerants has been developed and presented in previous works [Appl. Therm. Eng. 22 (2002) 173; Appl. Therm. Eng. 22 (2002) 379]. The discretized governing equations are coupled using an implicit step-by-step method. Due to the changes observed in the thermo-physical properties of mixtures using REFPROP v7.0 [Reference Fluid Thermodynamic and Transport Properties, NIST Standard Reference Database 23, Gaithersbug, MD 20899, USA, 2002] compared to REFPROP v5.0 [NIST Thermodynamic Properties of Refrigerants and Refrigerant Mixtures Database, Standard Reference Data Program, Gaithersbug, MD 20899, USA (February 1996)]; an extensive comparison of the numerical simulation developed with experimental data presented in the technical literature will be shown in order to demonstrate the accuracy of this detailed model. Finally, refrigerant-specific rating charts to predict in an easy way R-407C flow rates through adiabatic capillary tube are shown and used
The tensor analyzing power T20 in the dd → 3Hen and dd → 3Hp reactions at the energies 140, 200 and 270 MeV at zero angle

International Nuclear Information System (INIS)

Ladygin, V.P.; ); Uesaka, T.; Saito, T.

2006-01-01

The data on the tensor analyzing power T 20 in the dd → 3 Hen and dd → 3 Hp reactions at 140, 200 and 270 MeV of the deuteron kinetic energy and at zero angle obtained at RIKEN Accelerator Research Facility are presented. The observed positive sign of T 20 clearly demonstrates the sensitivity to the D/S wave ratios in the 3 He and 3 H in the energy domain of the measurements. The T 20 data for the 3 Hen and 3 Hp channels are in agreement within experimental accuracy [ru
Cross-sections for the formation of isomeric pair {sup 75}Ge{sup m,g} through (n, 2n), (n, p) and (n, {alpha}) reactions measured over 13.73 MeV to 14.77 MeV and calculated from near threshold to 20 MeV neutron energies

Energy Technology Data Exchange (ETDEWEB)

Attar, F.M.D.; Dhole, S.D. [Department of Physics, University of Pune, Pune-411007 (India); Kailas, S. [Nuclear Physics Division, BARC, Mumbai-400085 (India); Bhoraskar, V.N. [Department of Physics, University of Pune, Pune-411007 (India)], E-mail: vnb@physics.unipune.ernet.in

2009-09-15

The cross-sections for formation of isomeric pair, {sup 75}Ge{sup m}({sigma}{sub m}) and {sup 75}Ge{sup g}({sigma}{sub g}), through {sup 76}Ge(n, 2n), {sup 75}As(n, p) and {sup 78}Se(n, {alpha}) reactions were measured at 13.73 MeV, 14.42 MeV and 14.77 MeV neutrons and also estimated using EMPIRE-II and TALYS codes over neutron energies from near threshold to 20 MeV. For each (n, 2n), (n, p) and (n, {alpha}) reaction, the cross-section initially increases with neutron energy, but starts decreasing as the neutron energy exceeds the respective threshold of (n, 3n), (n, pn) and (n, {alpha}n) reactions. The higher values of {sigma}{sub m} relative to {sigma}{sub g} reveal that the transitions of the excited {sup 75}Ge from higher energy levels to metastable state (7{sup +}/2) are favored as compared to unstable ground state (1{sup -}/2). The present values of cross sections for formation of {sup 75}Ge{sup m,g} through (n, 2n) and (n, {alpha}) reactions are lower, and that of (n, p) reaction are higher compared to most of the corresponding literature cross-sections.
V1309 Scorpii: merger of a contact binary

Science.gov (United States)

Tylenda, R.; Hajduk, M.; Kamiński, T.; Udalski, A.; Soszyński, I.; Szymański, M. K.; Kubiak, M.; Pietrzyński, G.; Poleski, R.; Wyrzykowski, Ł.; Ulaczyk, K.

2011-04-01

Context. Stellar mergers are expected to take place in numerous circumstences in the evolution of stellar systems. In particular, they are considered as a plausible origin of stellar eruptions of the V838 Mon type. V1309 Sco is the most recent eruption of this type in our Galaxy. The object was discovered in September 2008. Aims: Our aim is to investigate the nature of V1309 Sco. Methods: V1309 Sco has been photometrically observed in course of the OGLE project since August 2001. We analyse these observations in different ways. In particular, periodogram analyses were done to investigate the nature of the observed short-term variability of the progenitor. Results: We find that the progenitor of V1309 Sco was a contact binary with an orbital period of ~1.4 day. This period was decreasing with time. The light curve of the binary was also evolving, indicating that the system evolved towards its merger. The violent phase of the merger, marked by the systematic brightenning of the object, began in March 2008, i.e. half a year before the outburst discovery. We also investigate the observations of V1309 Sco during the outburst and the decline and show that they can be fully accounted for within the merger hypothesis. Conclusions: For the first time in the literature we show from direct observations that contact binaries indeed end up by merging into a single object, as was suggested in numerous theoretical studies of these systems. Our study also shows that stellar mergers indeed result in eruptions of the V838 Mon type. Based on observations obtained with the 1.3-m Warsaw telescope at the Las Campanas Observatory of the Carnegie Institution of Washington. The photometric data analysed in the present paper are available from the OGLE Internet archive: ftp://ogle.astrouw.edu.pl/ogle/ogle3/V1309_SCO

Numerical weld modeling - a method for calculating weld-induced residual stresses

International Nuclear Information System (INIS)

Fricke, S.; Keim, E.; Schmidt, J.

2001-01-01

In the past, weld-induced residual stresses caused damage to numerous (power) plant parts, components and systems (Erve, M., Wesseling, U., Kilian, R., Hardt, R., Bruemmer, G., Maier, V., Ilg, U., 1994. Cracking in Stabilized Austenitic Stainless Steel Piping of German Boiling Water Reactors - Characteristic Features and Root Causes. 20. MPA-Seminar 1994, vol. 2, paper 29, pp.29.1-29.21). In the case of BWR nuclear power plants, this damage can be caused by the mechanism of intergranular stress corrosion cracking in austenitic piping or the core shroud in the reactor pressure vessel and is triggered chiefly by weld-induced residual stresses. One solution of this problem that has been used in the past involves experimental measurements of residual stresses in conjunction with weld optimization testing. However, the experimental analysis of all relevant parameters is an extremely tedious process. Numerical simulation using the finite element method (FEM) not only supplements this method but, in view of modern computer capacities, is also an equally valid alternative in its own right. This paper will demonstrate that the technique developed for numerical simulation of the welding process has not only been properly verified and validated on austenitic pipe welds, but that it also permits making selective statements on improvements to the welding process. For instance, numerical simulation can provide information on the starting point of welding for every weld bead, the effect of interpass cooling as far as a possible sensitization of the heat affected zone (HAZ) is concerned, the effect of gap width on the resultant weld residual stresses, or the effect of the 'last pass heat sink welding' (welding of the final passes while simultaneously cooling the inner surface with water) producing compressive stresses in the root area of a circumferential weld in an austenitic pipe. The computer program FERESA (finite element residual stress analysis) was based on a commercially
Verification and validation of a numeric procedure for flow simulation of a 2x2 PWR rod bundle

International Nuclear Information System (INIS)

Santos, Andre A.C.; Barros Filho, Jose Afonso; Navarro, Moyses A.

2011-01-01

Before Computational Fluid Dynamics (CFD) can be considered as a reliable tool for the analysis of flow through rod bundles there is a need to establish the credibility of the numerical results. Procedures must be defined to evaluate the error and uncertainty due to aspects such as mesh refinement, turbulence model, wall treatment and appropriate definition of boundary conditions. These procedures are referred to as Verification and Validation (V and V) processes. In 2009 a standard was published by the American Society of Mechanical Engineers (ASME) establishing detailed procedures for V and V of CFD simulations. This paper presents a V and V evaluation of a numerical methodology applied to the simulation of a PWR rod bundle segment with a split vane spacer grid based on ASMEs standard. In this study six progressively refined meshes were generated to evaluate the numerical uncertainty through the verification procedure. Experimental and analytical results available in the literature were used in this study for validation purpose. The results show that the ASME verification procedure can give highly variable predictions of uncertainty depending on the mesh triplet used for the evaluation. However, the procedure can give good insight towards optimization of the mesh size and overall result quality. Although the experimental results used for the validation were not ideal, through the validation procedure the deficiencies and strengths of the presented modeling could be detected and reasonably evaluated. Even though it is difficult to obtain reliable estimates of the uncertainty of flow quantities in the turbulent flow, this study shows that the V and V process is a necessary step in a CFD analysis of a spacer grid design. (author)
Developing of complex for hot plastic deformation modeling of steel type 20-30CrNiMoV for heavy forging

Directory of Open Access Journals (Sweden)

Dub Vladimir

2017-01-01

Full Text Available Production of heavy forging of bars weighing more then 235 tons for such products as rotors made of steel type 20-30CrNiMoV is a critical independent work, failure to perform which entails high costs related to repeated production (in case of defective product and untimely launch of production plants. One of the frequent causes of a defective product is the impossibility of ultrasonic testing in the barrel-gate zones on the rotor workpiece, which is due to the microstructure of the metal, namely the grain size. Determing the stages of deformation process wich causes such defects in structure is the main goal of this work.
Procedures for determining MATMOD-4V material constants

Energy Technology Data Exchange (ETDEWEB)

Lowe, T.C.

1993-11-01

The MATMOD-4V constitutive relations were developed from the original MATMOD model to extend the range of nonelastic deformation behaviors represented to include transient phenomena such as strain softening. Improvements in MATMOD-4V increased the number of independent material constants and the difficulty in determining their values. Though the constitutive relations are conceptually simple, their form and procedures for obtaining their constants can be complex. This paper reviews in detail the experiments, numerical procedures, and assumptions that have been used to determine a complete set of MATMOD-4V constants for high purity aluminum.
Comparison between human serum and Albuminar-20 (TM) supplement for in-vitro fertilization.

Science.gov (United States)

Staessen, C; Van den Abbeel, E; Carlé, M; Khan, I; Devroey, P; Van Steirteghem, A C

1990-04-01

Patient or fetal cord serum is commonly used as a protein supplement to culture media used in in-vitro fertilization (IVF). To eliminate the variability and possible hazards related to the use of human serum, a well-defined protein supplement, Albuminar-20 (Armour Pharmaceutical Cy) was evaluated as a substitute for serum. Prior to its application in the human, Earle's culture media supplemented with 0.5% (w/v) bovine serum albumin, 8% (v/v) decomplemented patient serum or 2.25% (v/v) Albuminar-20 were compared in a mouse bioassay. For the three different conditions, the percentages of blastocysts formed after 120 h in-vitro culture were respectively 91.2, 85.2 and 87.8% (NS). In the human IVF, a controlled comparison was performed from October to December 1988, between Earle's medium supplemented with patients' serum or Albuminar-20. When oocytes and spermatozoa were cultured in these two media, the fertilization rates were similar, 58.9% in human serum versus 59.4% in Albuminar-20. After further culture, the morphological quality of the cleaved embryos was better in the embryos cultured in Albuminar-20. The higher pregnancy rate in Albuminar-20 was correlated with the better morphological appearance of the embryos and their more advanced cleavage stage at the time of transfer. Therefore, Albuminar-20 can be considered as a suitable protein supplement in human IVF.
PR 2.0 müsteeriumid / Jaan Vare

Index Scriptorium Estoniae

Vare, Jaan, 1977-

2008-01-01

PR 2.0 ehk avalike suhete uus põlvkond kasutab rohkem uusi võimalusi, viies interneti ja sealsete kommuunide kaudu omavahel kokku turu eri segmendid ning ühendades tarbijaid tootjaga. Üheks uueks firma häälekandjaks veebis võib olla ka blogimine
Inclusive photoproduction of PHI, Ksup(*)(890) and Ksup(*)(1420) in the photon energy range 20 to 70 GeV

International Nuclear Information System (INIS)

Atkinson, M.; Davenport, M.; Flower, P.; Hutton, J.S.; Kumar, B.R.; Morris, J.A.G.; Morris, J.V.; Sharp, P.H.

1986-01-01

Inclusive photoproduction of PHI, Ksup(*0)(890), anti Ksup(*0)(890) and Ksup(*0)(1420), anti Ksup(*0)(1420) has been studied in γp collisions with photons of energy 20 to 70 GeV and in the range 0.1<=chisub(F)<=0.95 [0.4<=chisub(F)<=0.8 for the anti Ksup(*)(1420)], chisub(F) being the Feynman variable of the vector/tensor meson. The cross-sections for these processes, averaged over the photon energy range and integrated over chisub(F) are given. The inclusive PHI production in the forward direction can be described quantitatively by a triple-Regge model calculation. The remaining PHI production and the total Ksup(*0)(890) and anti Ksup(*0)(890) production are consistent with a quark fusion picture. (orig.)
Numerical Simulation of Hydrogen Combustion: Global Reaction Model and Validation

Energy Technology Data Exchange (ETDEWEB)

Zhang, Yun [School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an (China); Department of Mechanical, Aerospace and Nuclear Engineering, Rensselaer Polytechnic Institute, Troy, NY (United States); Liu, Yinhe, E-mail: yinheliu@mail.xjtu.edu.cn [School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an (China)

2017-11-20

Due to the complexity of modeling the combustion process in nuclear power plants, the global mechanisms are preferred for numerical simulation. To quickly perform the highly resolved simulations with limited processing resources of large-scale hydrogen combustion, a method based on thermal theory was developed to obtain kinetic parameters of global reaction mechanism of hydrogen–air combustion in a wide range. The calculated kinetic parameters at lower hydrogen concentration (C{sub hydrogen} < 20%) were validated against the results obtained from experimental measurements in a container and combustion test facility. In addition, the numerical data by the global mechanism (C{sub hydrogen} > 20%) were compared with the results by detailed mechanism. Good agreement between the model prediction and the experimental data was achieved, and the comparison between simulation results by the detailed mechanism and the global reaction mechanism show that the present calculated global mechanism has excellent predictable capabilities for a wide range of hydrogen–air mixtures.
Numerical Simulation of Hydrogen Combustion: Global Reaction Model and Validation

International Nuclear Information System (INIS)

Zhang, Yun; Liu, Yinhe

2017-01-01

Due to the complexity of modeling the combustion process in nuclear power plants, the global mechanisms are preferred for numerical simulation. To quickly perform the highly resolved simulations with limited processing resources of large-scale hydrogen combustion, a method based on thermal theory was developed to obtain kinetic parameters of global reaction mechanism of hydrogen–air combustion in a wide range. The calculated kinetic parameters at lower hydrogen concentration (C hydrogen < 20%) were validated against the results obtained from experimental measurements in a container and combustion test facility. In addition, the numerical data by the global mechanism (C hydrogen > 20%) were compared with the results by detailed mechanism. Good agreement between the model prediction and the experimental data was achieved, and the comparison between simulation results by the detailed mechanism and the global reaction mechanism show that the present calculated global mechanism has excellent predictable capabilities for a wide range of hydrogen–air mixtures.
Fission cross section measurements at the LLL 100-MeV linac

International Nuclear Information System (INIS)

Browne, J.C.

1975-01-01

The fission cross section for 235 U was measured from thermal energy to 20 MeV in several steps. First, the cross section was measured from 8 MeV to 20 MeV relative to the n,p scattering cross section and then from thermal to one MeV relative to 6 Li(n,α). In addition, a measurement of the ratio of the fission cross sections of 235 U and 238 U relative to 235 U has been completed in the range 1 keV to 30 MeV for 233 U and 100 keV to 30 MeV for 238 U. Statistical uncertainties are less than 4 percent. (U.S.)
The application of modern electric systems to T and D infrastructures to achieve EU 20/20/20 climate and energy targets

International Nuclear Information System (INIS)

Bonfiglio, A.; Delfino, F.; Denegri, G.B.; Invernizzi, M.; Procopio, R.; Pampararo, F.; Amann, G.; Bessede, J. L.; Luxa, A.; Monizza, G.

2011-03-01

This paper is the outcome of a collaboration between T and D Europe - The European Association of the Electricity Transmission and Distribution Equipment and Services Industry and the Power Systems Research Team at the University of Genoa. It presents a scientific analysis of how much modern products and systems from the electric industry contribute to the European Union's (EU) efforts to mitigate climate change (EU's Climate and Energy Policy 20/20/20 [1]). A methodology is proposed in order to quantify the possible environmental benefits in terms of efficiency increase, CO 2 reduction and a wider employ of renewable energy resources as well as of power quality improvement provided by a renewal of the European T and D infrastructures. Such methodology is based both on the identification of suitable technical KPIs (Key Performance Indicators) to be used to rank the benefits brought by the different grid upgrading measures and on the definition of suitable 'test networks', which can be employed as benchmarks to perform the numerical evaluation of the introduced KPIs. (authors)
The application of modern electric systems to T and D infrastructures to achieve EU 20/20/20 climate and energy targets

Energy Technology Data Exchange (ETDEWEB)

Bonfiglio, A.; Delfino, F.; Denegri, G.B.; Invernizzi, M.; Procopio, R.; Pampararo, F. [Department of Electrical Engineering, University of Genoa, via Opera Pia, 11 a, I-16145 Genova (Italy); Amann, G.; Bessede, J. L.; Luxa, A.; Monizza, G. [T and D Europe - The European Association of the Electricity Transmission and Distribution Equipment and Services Industry, Diamant Building, Boulevard A. Reyers 80, B 1030 Brussels (Belgium)

2011-03-15

This paper is the outcome of a collaboration between T and D Europe - The European Association of the Electricity Transmission and Distribution Equipment and Services Industry and the Power Systems Research Team at the University of Genoa. It presents a scientific analysis of how much modern products and systems from the electric industry contribute to the European Union's (EU) efforts to mitigate climate change (EU's Climate and Energy Policy 20/20/20 [1]). A methodology is proposed in order to quantify the possible environmental benefits in terms of efficiency increase, CO{sub 2} reduction and a wider employ of renewable energy resources as well as of power quality improvement provided by a renewal of the European T and D infrastructures. Such methodology is based both on the identification of suitable technical KPIs (Key Performance Indicators) to be used to rank the benefits brought by the different grid upgrading measures and on the definition of suitable 'test networks', which can be employed as benchmarks to perform the numerical evaluation of the introduced KPIs. (authors)
Mathematical study and numerical simulations of bi-kinetic plasma sheaths

International Nuclear Information System (INIS)

Badsi, Mehdi

2016-01-01

This thesis focuses on the construction and the numerical simulation theoretical models of plasmas in interaction with an absorbing wall. These models are based on two species Vlasov-Poisson or Vlasov-Ampere systems in the presence of boundary conditions. The expected stationary solutions must verify the balance of the flux of charges in the orthogonal direction to the wall. This feature is called the ambi-polarity. Through the study of a non linear Poisson equation, we prove the well-posedness of 1d-1v stationary Vlasov-Poisson system, for which we determine incoming particles distributions and a wall potential that induces the ambi-polarity as well as a non negative charge density hold. We also give a quantitative estimates of the thickness of the boundary layer that develops at the wall. These results are illustrated numerically. We prove the linear stability of the electronic stationary solution for a non-stationary Vlasov-Ampere system. Finally, we study a 1d-3v stationary Vlasov-Poisson system in the presence of a constant and parallel to the wall magnetic field. We determine incoming particles distributions and a wall potential so that the ambi-polarity holds. We study a non linear Poisson equation through a non linear functional energy that admits minimizers. We established some bounds on the numerical parameters inside which, our model is relevant and we propose an interpretation of the results. (author)
Investigation of EBT2 and EBT3 films for proton dosimetry in the 4-20 MeV energy range.

Science.gov (United States)

Reinhardt, S; Würl, M; Greubel, C; Humble, N; Wilkens, J J; Hillbrand, M; Mairani, A; Assmann, W; Parodi, K

2015-03-01

Radiochromic films such as Gafchromic EBT2 or EBT3 films are widely used for dose determination in radiation therapy because they offer a superior spatial resolution compared to any other digital dosimetric 2D detector array. The possibility to detect steep dose gradients is not only attractive for intensity-modulated radiation therapy with photons but also for intensity-modulated proton therapy. Their characteristic dose rate-independent response makes radiochromic films also attractive for dose determination in cell irradiation experiments using laser-driven ion accelerators, which are currently being investigated as future medical ion accelerators. However, when using these films in ion beams, the energy-dependent dose response in the vicinity of the Bragg peak has to be considered. In this work, the response of these films for low-energy protons is investigated. To allow for reproducible and background-free irradiation conditions, the films were exposed to mono-energetic protons from an electrostatic accelerator, in the 4-20 MeV energy range. For comparison, irradiation with clinical photons was also performed. It turned out that in general, EBT2 and EBT3 films show a comparable performance. For example, dose-response curves for photons and protons with energies as low as 11 MeV show almost no differences. However, corrections are required for proton energies below 11 MeV. Care has to be taken when correction factors are related to an average LET from depth-dose measurements, because only the dose-averaged LET yields similar results as obtained in mono-energetic measurements.
Communication of nuclear data progress No.20(1998)

International Nuclear Information System (INIS)

1998-12-01

This is the 20th issue of Communication of Nuclear Data Progress (CNDP), in which the achievements in nuclear data field for the last year in China are carried. It includes the measurement of cross sections for 92 Mo (n,p) 92m Nb reaction and deduction of low energy neutron; theoretical calculations of n + 9 Be, 12 C, 85,87 Rb, 88,89,90 Sr, 89 Y, 113 Cd, 115 In, 121,123 Sb below 20 MeV and γ + 51 V, 180,182,183,184,186 W below 30 MeV; evaluations of 63,65,Nat Cu(n, α), (n,n'α) and γ + 51 V reactions and 238 U fission product yields; a method and program CABEI for adjusting consistency between the cross section data of natural element and its isotopes; testing of the tritium production for 6 Li and 7 Li; and fragment angular anisotropies and inertia parameters
Comparative molecular-orbital and atomic-orbital study of electron transfer and excitation in He++Na(3s) collisions at energies of 0.05 to 20 keV/amu

International Nuclear Information System (INIS)

Fritsch, W.; Kimura, M.; Lane, N.F.

1990-01-01

Electron transfer and excitation in 0.05- to 20-keV/amu He + +Na(3s) collisions is studied theoretically within the close-coupling method with two-electron molecular- and atomic-orbital expansion basis sets. Results agree with the trend of other information on this system. Remaining discrepancies that are larger than those in similar contemporary studies of one-electron systems are discussed with reference to the convergence of this two-electron study. Results for the integral alignment parameter A 20 are also presented as a guideline for future experimental study
Novel digital K-edge imaging system with transition radiation from an 855-MeV electron beam

CERN Document Server

Hagenbuck, F; Clawiter, N; Euteneuer, H; Görgen, F; Holl, P; Johann, K; Kiser, K H; Kemmer, J; Kerschner, T; Kettig, O; Koch, H; Kube, G; Lauth, W; Mauhay, H; Schütrumpf, M; Stotter, R; Strüder, L; Walcher, T; Wilms, A; von Zanthier, C; Zemter, M

2001-01-01

A novel K-edge imaging method has been developed at the Mainz Microtron MAMI aiming at a very efficient use of the transition radiation (TR) flux generated by the external 855-MeV electron beam in a foil stack. A fan-like quasi-monochromatic hard X-ray beam is produced from the +or-1-mrad-wide TR cone with a highly oriented pyrolytic graphite (HOPG) crystal. The absorption of the object in front of a 30 mm*10 mm pn charge-coupled device (pn-CCD) photon detector is measured at every pixel by a broad-band energy scan around the K-absorption edge. This is accomplished by a synchronous variation of the lateral crystal position and the electron beam direction which defines also the direction of the TR cone. The system has been checked with a phantom consisting of a 2.5- mu m thick molybdenum sample embedded in a 136- or 272- mu m-thick copper bulk foil. A numerical analysis of the energy spectrum for every pixel demonstrates that data as far as +or-0.75 keV away from the K edge of molybdenum at 20 keV still improv...
Nuclear power plant V-2

International Nuclear Information System (INIS)

1998-01-01

The nuclear power plant Bohunice V -2 is briefly described. This NPP consists from two reactor units. Their main time characteristics are (Reactor Unit 1, Reactor Unit 2): beginning of construction - December 1976; first controlled reactor power - 7 August 1984, 2 August 1985; connection to the grid - 20 August 1984, 9 August 1985; commercial operation - 14 February 1985, 18 December 1985. This leaflet contains: NPP V-2 construction; Major technological equipment [WWER 440 V230 type reactor; Nuclear Power plant operation safety (Safety barriers; Safety systems [Active safety systems, Passive safety systems]); Centralized heat supply system; Scheme of Bohunice V-2 NPP and technical data
Numerical evaluation of two-center integrals over Slater type orbitals

Energy Technology Data Exchange (ETDEWEB)

Kurt, S. A., E-mail: slaykurt@gmail.com [Department of Physics, Natural Sciences Institute, Ondokuz Mayıs University, 55139, Samsun (Turkey); Yükçü, N., E-mail: nyukcu@gmail.com [Department of Energy Systems Engineering, Faculty of Technology, Adıyaman University, 02040, Adıyaman (Turkey)

2016-03-25

Slater Type Orbitals (STOs) which one of the types of exponential type orbitals (ETOs) are used usually as basis functions in the multicenter molecular integrals to better understand physical and chemical properties of matter. In this work, we develop algorithms for two-center overlap and two-center two-electron hybrid and Coulomb integrals which are calculated with help of translation method for STOs and some auxiliary functions by V. Magnasco’s group. We use Mathematica programming language to produce algorithms for these calculations. Numerical results for some quantum numbers are presented in the tables. Consequently, we compare our obtained numerical results with the other known literature results and other details of evaluation method are discussed.
Numerical evaluation of two-center integrals over Slater type orbitals

International Nuclear Information System (INIS)

Kurt, S. A.; Yükçü, N.

2016-01-01

Slater Type Orbitals (STOs) which one of the types of exponential type orbitals (ETOs) are used usually as basis functions in the multicenter molecular integrals to better understand physical and chemical properties of matter. In this work, we develop algorithms for two-center overlap and two-center two-electron hybrid and Coulomb integrals which are calculated with help of translation method for STOs and some auxiliary functions by V. Magnasco’s group. We use Mathematica programming language to produce algorithms for these calculations. Numerical results for some quantum numbers are presented in the tables. Consequently, we compare our obtained numerical results with the other known literature results and other details of evaluation method are discussed.

V2282 Sgr Revisited

Directory of Open Access Journals (Sweden)

Roberto Nesci

2014-12-01

Full Text Available The nature of V2282 Sgr is examined on the basis of several multiband observations: a 20 years long I-band light curve of V2282 Sgr obtained from archive photographic plates of the Asiago and Catania Observatories; a CCD R-band light curve obtained at Cornero Observatory; JHK photometry from 2MASS and UKDISS; Spitzer IRAC and MIPS images; optical spectra from Loiano Observatory; X-ray flux from CHANDRA. The star has a K-type spectrum with strong emission lines and is irregularly variable at all wavebands. The overall evidences suggest that V2282 Sgr is a Pre Main Sequence star with an accretion disk.
Numerical analysis

CERN Document Server

Rao, G Shanker

2006-01-01

About the Book: This book provides an introduction to Numerical Analysis for the students of Mathematics and Engineering. The book is designed in accordance with the common core syllabus of Numerical Analysis of Universities of Andhra Pradesh and also the syllabus prescribed in most of the Indian Universities. Salient features: Approximate and Numerical Solutions of Algebraic and Transcendental Equation Interpolation of Functions Numerical Differentiation and Integration and Numerical Solution of Ordinary Differential Equations The last three chapters deal with Curve Fitting, Eigen Values and Eigen Vectors of a Matrix and Regression Analysis. Each chapter is supplemented with a number of worked-out examples as well as number of problems to be solved by the students. This would help in the better understanding of the subject. Contents: Errors Solution of Algebraic and Transcendental Equations Finite Differences Interpolation with Equal Intervals Interpolation with Unequal Int...
Emission of fast neutrons in the iteraction of 12C and 20Ne ions at energy 9 MeV/nucleon with 181Ta nuclei

International Nuclear Information System (INIS)

Kozulin, E.M.; Blinov, M.V.; Borcha, K.; Kovalenko, S.S.; Mozhaev, A.N.; Penionzhkevich, Y.E.

1987-01-01

The energy spectra and angular distributions have been measured for neutrons emitted in the reactions 12 C(105 MeV)+ 181 Ta and 20 Ne(180 MeV)+ 181 Ta. The experimental data obtained permitted the conclusion that there are equilibrium and pre-equilibrium components in the emission of neutrons in each of the reactions. The yields and angular distributions of pre-equilibrium neutrons from these reactions are appreciably different. From comparison of results of the present work with the data from other studies, information is obtained on the dependence of the yield of pre-equilibrium neutrons and protons on the incident-ion mass. The analysis is carried out with the use of the statistical model for describing the emission of evaporation neutrons and also use of the ''rotating spot'' and ''moving source'' models for pre-equilibrium neutrons
Re-Designing Open Data 2.0

Directory of Open Access Journals (Sweden)

Alon Peled

2013-12-01

Full Text Available Since 2009, eighty-one countries subscribed to President Obama’s Open Government program including its dominant Open Data (OD component. Do Open Data 2.0 plans address the problems detected during the first generation of this program (2010-2012? If not, how can these plans be improved? The article is a review of the main lines of criticism of the original OD program based on lessons learned worldwide. OD1.0 suffered from bad design, flawed execution, and adverse consequences. Open Data 2.0 plans fail to address the critical flaws of the first Open Data program. The analysis of OD1.0 reveals two primary lessons for converting OD2.0 into a more focused and effective openness program: OD2.0 architects must consider agencies’ data release strategies, and avoid creating a transparency “policy bubble”. Numerous countries followed the path of the original American Open Data program; therefore, the future of this program will have an impact on bureaucracies worldwide.
A DATABASE OF >20 keV ELECTRON GREEN'S FUNCTIONS OF INTERPLANETARY TRANSPORT AT 1 AU

Energy Technology Data Exchange (ETDEWEB)

Agueda, N.; Sanahuja, B. [Departament d' Astronomia i Meteorologia, Institut de Ciencies del Cosmos, Universitat de Barcelona, Barcelona (Spain); Vainio, R. [Department of Physics, University of Helsinki, Helsinki (Finland)

2012-10-15

We use interplanetary transport simulations to compute a database of electron Green's functions, i.e., differential intensities resulting at the spacecraft position from an impulsive injection of energetic (>20 keV) electrons close to the Sun, for a large number of values of two standard interplanetary transport parameters: the scattering mean free path and the solar wind speed. The nominal energy channels of the ACE, STEREO, and Wind spacecraft have been used in the interplanetary transport simulations to conceive a unique tool for the study of near-relativistic electron events observed at 1 AU. In this paper, we quantify the characteristic times of the Green's functions (onset and peak time, rise and decay phase duration) as a function of the interplanetary transport conditions. We use the database to calculate the FWHM of the pitch-angle distributions at different times of the event and under different scattering conditions. This allows us to provide a first quantitative result that can be compared with observations, and to assess the validity of the frequently used term beam-like pitch-angle distribution.
Development of a 33 kV, 20 A long pulse converter modulator for high average power klystron

International Nuclear Information System (INIS)

Reghu, T.; Mandloi, V.; Shrivastava, Purushottam

2014-01-01

Research, design, and development of high average power, long pulse modulators for the proposed Indian Spallation Neutron Source are underway at Raja Ramanna Centre for Advanced Technology. With this objective, a prototype of long pulse modulator capable of delivering 33 kV, 20 A at 5 Hz repetition rate has been designed and developed. Three Insulated Gate Bipolar Transistors (IGBT) based switching modules driving high frequency, high voltage transformers have been used to generate high voltage output. The IGBT based switching modules are shifted in phase by 120° with respect to each other. The switching frequency is 25 kHz. Pulses of 1.6 ms pulse width, 80 μs rise time, and 70 μs fall time have been achieved at the modulator output. A droop of ±0.6% is achieved using a simple segmented digital droop correction technique. The total fault energy transferred to the load during fault has been measured by conducting wire burn tests and is found to be within 3.5 J
Development of a 33 kV, 20 A long pulse converter modulator for high average power klystron

Science.gov (United States)

Reghu, T.; Mandloi, V.; Shrivastava, Purushottam

2014-05-01

Research, design, and development of high average power, long pulse modulators for the proposed Indian Spallation Neutron Source are underway at Raja Ramanna Centre for Advanced Technology. With this objective, a prototype of long pulse modulator capable of delivering 33 kV, 20 A at 5 Hz repetition rate has been designed and developed. Three Insulated Gate Bipolar Transistors (IGBT) based switching modules driving high frequency, high voltage transformers have been used to generate high voltage output. The IGBT based switching modules are shifted in phase by 120° with respect to each other. The switching frequency is 25 kHz. Pulses of 1.6 ms pulse width, 80 μs rise time, and 70 μs fall time have been achieved at the modulator output. A droop of ±0.6% is achieved using a simple segmented digital droop correction technique. The total fault energy transferred to the load during fault has been measured by conducting wire burn tests and is found to be within 3.5 J.
Development of a 33 kV, 20 A long pulse converter modulator for high average power klystron

Energy Technology Data Exchange (ETDEWEB)

Reghu, T.; Mandloi, V.; Shrivastava, Purushottam [Pulsed High Power Microwave Section, Raja Ramanna Centre for Advanced Technology, Indore 452013, M.P. (India)

2014-05-15

Research, design, and development of high average power, long pulse modulators for the proposed Indian Spallation Neutron Source are underway at Raja Ramanna Centre for Advanced Technology. With this objective, a prototype of long pulse modulator capable of delivering 33 kV, 20 A at 5 Hz repetition rate has been designed and developed. Three Insulated Gate Bipolar Transistors (IGBT) based switching modules driving high frequency, high voltage transformers have been used to generate high voltage output. The IGBT based switching modules are shifted in phase by 120° with respect to each other. The switching frequency is 25 kHz. Pulses of 1.6 ms pulse width, 80 μs rise time, and 70 μs fall time have been achieved at the modulator output. A droop of ±0.6% is achieved using a simple segmented digital droop correction technique. The total fault energy transferred to the load during fault has been measured by conducting wire burn tests and is found to be within 3.5 J.
The SU(3) beta function from numerical stochastic perturbation theory

Energy Technology Data Exchange (ETDEWEB)

Horsley, R. [Edinburgh Univ. (United Kingdom). School of Physics and Astronomy; Perlt, H. [Leipzig Univ. (Germany). Inst. fuer Theoretische Physik; Bonn Univ. (Germany). Helmholtz Inst. fuer Strahlen- und Kernphysik; Rakow, P.E.L. [Liverpool Univ. (United Kingdom). Theoretical Physics Div.; Schierholz, G.; Schiller, A. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

2013-09-15

The SU(3) beta function is derived from Wilson loops computed to 20th order in numerical stochastic perturbation theory. An attempt is made to include massless fermions, whose contribution is known analytically to 4th order. The question whether the theory admits an infrared stable fixed point is addressed.
Majanduskriis ja G20 / Marianne Mikko

Index Scriptorium Estoniae

Mikko, Marianne, 1961-

2008-01-01

Euroopa sotsiaaldemokraatide arvates on Euroopale õige suund hästireguleeritud sotsiaalne turumajandus. Washingtonis toimuv 20 juhtiva majandusriigi kohtumine pakub võimalust Euroopa rahvamajandusliku mudeli mõjuala laiendada. Ilmunud ka: Harju Ekspress 21. nov. lk. 6
CHIRON: a package for ChPT numerical results at two loops

Energy Technology Data Exchange (ETDEWEB)

Bijnens, Johan [Lund University, Department of Astronomy and Theoretical Physics, Lund (Sweden)

2015-01-01

This document describes the package CHIRON which includes two libraries, chiron itself and jbnumlib.chiron is a set of routines useful for two-loop numerical results in chiral perturbation theory (ChPT). It includes programs for the needed one- and two-loop integrals as well as routines to deal with the ChPT parameters. The present version includes everything needed for the masses, decay constants and quark-antiquark vacuum-expectation-values. An added routine calculates consistent values for the masses and decay constants when the pion and kaon masses are varied. In addition a number of finite volume results are included: one-loop tadpole integrals, two-loop sunset integrals and the results for masses and decay constants. The numerical routine library jbnumlib contains the numerical routines used in chiron. Many are to a large extent simple C++ versions of routines in the CERNLIB numerical library. Notable exceptions are the dilogarithm and the Jacobi theta function implementations. This paper describes what is included in CHIRON v0.50. (orig.)
Color-Space-Based Visual-MIMO for V2X Communication

OpenAIRE

Jai-Eun Kim; Ji-Won Kim; Youngil Park; Ki-Doo Kim

2016-01-01

In this paper, we analyze the applicability of color-space-based, color-independent visual-MIMO for V2X. We aim to achieve a visual-MIMO scheme that can maintain the original color and brightness while performing seamless communication. We consider two scenarios of GCM based visual-MIMO for V2X. One is a multipath transmission using visual-MIMO networking and the other is multi-node V2X communication. In the scenario of multipath transmission, we analyze the channel capacity numerically and w...
Neutron yield of thick {sup 12}C and {sup 13}C targets with 20 and 30 MeV deuterons

Energy Technology Data Exchange (ETDEWEB)

Lhersonneau, G.; Fadil, M. [GANIL, Caen (France); Malkiewicz, T. [CSC - IT Center for Science Ltd., Espoo (Finland); Gorelov, D.; Sorri, J.; Trzaska, W.H. [University of Jyvaskyla, Department of Physics, Jyvaskyla (Finland); Jones, P.; Ngcobo, P.Z. [iThemba Laboratory for Accelerator Based Science, Western Cape (South Africa)

2016-12-15

The neutron yield of thick targets of carbon, natural and enriched in {sup 13}C, bombarded by deuterons of 20 and 30 MeV has been measured by the activation method. The gain with respect to a {sup 12}C target is the same as with protons beams. The yield ratio is about 1.2 only and hardly can justify the use of a {sup 13}C target with deuteron beams. The data, apart from being of interest for the design of facilities where secondary neutron beams are used, provide a test case for calculations where both beam and target have a weakly bound neutron. The MCNPx code version 2.6.0, despite failing to reproduce some details of the experimental distributions, describes their global properties fairly well, especially the relative yields of the {sup 12}C and {sup 13}C targets. (orig.)
Backward production of mesons associated with. Delta. sup ++ (1232) in. pi. sup + p interactions at 20 GeV/c

Energy Technology Data Exchange (ETDEWEB)

Perepelitsa, V.F.; Mikhailichenko, V.I.; Nikitin, S.Ya.; Zhokin, A.S. (Institut Teoreticheskoj i Ehksperimental' noj Fiziki, Moscow (USSR)); Akopov, N.Z.; Grigoryan, A.A.; Karapetyan, V.V. (Erevanskij Fizicheskij Inst., Erevan (USSR)); Dorsaz, L.; Sonderegger, P. (European Organization for Nuclear Research, Geneva (Switzerland)); Ferrer, A. (Centro Mixto Valencia Univ./CSIC, Valencia (Spain). Inst. de Fisica Corpuscular)

1991-05-01

We have analyzed backward meson production in {pi}{sup +}p reactions at 20 GeV/c, which were measured in the CERN {Omega} spectrometer triggered by a fast proton (p{sub f}), in experiment WA 56. Production via baryon exchange of quasi-two-body final states {Delta}{sup ++}(1232) rho{sup 0}(770), {Delta}{sup ++}(1232) f{sub 2}(1270) and {Delta}{sup ++}(1232) rho{sub 3}{sup 0}(1690) is clearly identified. The density matrix elements of meson resonances and of {Delta}{sup ++}(1232) are analyzed. We have observed also the reactions {pi}{sup +}p->{Delta}{sup ++}(1232){pi}{sup 0} and {pi}{sup +}p->{Delta}{sup ++}(1232){omega} in the p{sub f}{pi}{sup +}{pi}{sup 0} and p{sub f}{pi}{sup +}{pi}{sup +}{pi}{sup -}{pi}{sup 0} final states. (orig.).
The Chandra Source Catalog 2.0: Calibrations

Science.gov (United States)

Graessle, Dale E.; Evans, Ian N.; Rots, Arnold H.; Allen, Christopher E.; Anderson, Craig S.; Budynkiewicz, Jamie A.; Burke, Douglas; Chen, Judy C.; Civano, Francesca Maria; D'Abrusco, Raffaele; Doe, Stephen M.; Evans, Janet D.; Fabbiano, Giuseppina; Gibbs, Danny G., II; Glotfelty, Kenny J.; Grier, John D.; Hain, Roger; Hall, Diane M.; Harbo, Peter N.; Houck, John C.; Lauer, Jennifer L.; Laurino, Omar; Lee, Nicholas P.; Martínez-Galarza, Juan Rafael; McCollough, Michael L.; McDowell, Jonathan C.; Miller, Joseph; McLaughlin, Warren; Morgan, Douglas L.; Mossman, Amy E.; Nguyen, Dan T.; Nichols, Joy S.; Nowak, Michael A.; Paxson, Charles; Plummer, David A.; Primini, Francis Anthony; Siemiginowska, Aneta; Sundheim, Beth A.; Tibbetts, Michael; Van Stone, David W.; Zografou, Panagoula

2018-01-01

Among the many enhancements implemented for the release of Chandra Source Catalog (CSC) 2.0 are improvements in the processing calibration database (CalDB). We have included a thorough overhaul of the CalDB software used in the processing. The software system upgrade, called "CalDB version 4," allows for a more rational and consistent specification of flight configurations and calibration boundary conditions. Numerous improvements in the specific calibrations applied have also been added. Chandra's radiometric and detector response calibrations vary considerably with time, detector operating temperature, and position on the detector. The CalDB has been enhanced to provide the best calibrations possible to each observation over the fifteen-year period included in CSC 2.0. Calibration updates include an improved ACIS contamination model, as well as updated time-varying gain (i.e., photon energy) and quantum efficiency maps for ACIS and HRC-I. Additionally, improved corrections for the ACIS quantum efficiency losses due to CCD charge transfer inefficiency (CTI) have been added for each of the ten ACIS detectors. These CTI corrections are now time and temperature-dependent, allowing ACIS to maintain a 0.3% energy calibration accuracy over the 0.5-7.0 keV range for any ACIS source in the catalog. Radiometric calibration (effective area) accuracy is estimated at ~4% over that range. We include a few examples where improvements in the Chandra CalDB allow for improved data reduction and modeling for the new CSC.This work has been supported by NASA under contract NAS 8-03060 to the Smithsonian Astrophysical Observatory for operation of the Chandra X-ray Center.
G20 veeretas eile Londonis triljonit dollarit / Heiki Suurkask

Index Scriptorium Estoniae

Suurkask, Heiki, 1972-

2009-01-01

Londonis toimunud G20 tippkohtumisel jõuti kokkuleppele, et maailma kriisist välja aitamiseks antakse maailmakaubandusele rahasüst ning IMF saab juba olemasolevale 250 miljardile dollarile lisaks rohkem vahendeid. Skeem: Majanduse stimuleerimise paketid G20 riikides
Measurement of D(d,p)T Reaction Cross Sections in Sm Metal in Low Energy Region (10(≤) Ed(≤)20 keV)

Institute of Scientific and Technical Information of China (English)

WANG Tie-Shan; YANG Zhen; H. Yunemura; A. Nakagawa; LV Hui-Yi; CHEN Jian-Yong; LIU Sheng-Jin; J. Kasagi

2007-01-01

To study the screening effect of nuclear reactions in metallic environments, the thick target yields, the cross sections and the experimental S(E) factors of the D{d,p)T reaction have been measured on deuterons implanted in Sm metal at 133.2 K for beam energies ranging from 10 to 20keV. The thick target yields of protons emitted in the D(d,p)T reaction are measured and compared with those data extrapolated from cross sections and stopping power data at higher energies. The screening potential in Sm metal at 133.2K is deduced to be 520±56eV. As compared with the value achieved in the gas target, the calculated screening potential values are much larger. This screening potential cannot be simply interpreted only by the electron screening. Energy dependences of the cross section cr(E) and the experimental S(E) factor for D(d,p)T reaction in Sm metal at 133.2K are obtained, respectively.
Experimental and numerical analysis of the static and dynamic crack growth resistance behaviour of structural steels in the temperature range from 20 C to 350 C

International Nuclear Information System (INIS)

Aurich, D.; Gerwien, P.; Huenecke, J.; Klingbeil, D.; Krafka, H.; Kuenecke, G.; Ohm, K.; Veith, H.; Wossidlo, P.; Haecker, R.

1998-01-01

The crack growth resistance behaviour of the steels StE 460 and 22NiMoCr3-7 was determined in the temperature range from 23 C to 350 C by means of C(T), M(T), and ISO-V specimens tested under quasistatic and dynamic loads. The Russian steel 15Ch2NMFA-A was tested at room temperature and 50 C. In the steels StE 460 and 22 NiMoCr3-7, the minimum crack growth resistance is observed at about 250 C, with measured values always being higher for the latter steel type. The crack growth resistance behaviour of the tested materials correlates with the behaviour of flow curve, yield strength, and notch impact toughness as a function of temperature. Impact tests of ISO-V specimens give higher crack resistance values than quasistatic load tests, and the temperature dependence is significantly lower than those of specimens tested under static loads. A metallurgical analysis of the materials shows the causes of the dissimilar behaviour. The stretching zones determined for the C(T) specimen correspond to the toughness of the steels examined, and they are not much influenced by the temperature. The numerical analysis using damaging models for simulation of ductile crack growth is reported for all specimen types and two different temperatures each. (orig./CB) [de
Ductile-phase toughening in V-V3Si in situ composites

International Nuclear Information System (INIS)

Henshall, G.; Strum, M.J.; Bewlay, B.P.; Sutliff, J.A.

1997-01-01

This article describes the room-temperature fracture behavior of ductile-phase-toughened V-V 3 Si in situ composites that were produced by arc melting (AM), cold-crucible induction melting (IM), and cold-crucible directional solidification (DS). Composites were produced containing a wide range of microstructures, interstitial impurity contents, and volume fractions of the ductile V-Si solid solution phase, denoted (V). The fracture toughness of these composites generally increases as the volume fraction of (V) increases, but is strongly influenced by the microstructure, the mechanical properties of the component phases, and the crystallographic orientation of the (V) phase with respect to the maximum principal stress direction. For eutectic composites that have a (V) volume fraction of about 50 pct, the fracture toughness increases with decreasing ''''effective'''' interstitial impurity concentration, [I] = [N] + 1.33 [O] + 9 [H]. As [I] decreases from 1,400 ppm (AM) to 400 ppm (IM), the fracture toughness of the eutectic composites increases from 10 to 20 MPa √m. Further, the fracture toughness of the DS eutectic composites is greater when the crack propagation direction is perpendicular, rather than parallel, to the composite growth direction. These results are discussed in light of conventional ductile-phase bridging theories, which alone cannot fully explain the fracture toughness of V-Si in situ composites
Characterisation of a monolithic active pixel sensor for electron detection in the energy range 10-20 keV

International Nuclear Information System (INIS)

Matheson, J.; Moldovan, G.; Clark, A.; Prydderch, M.; Turchetta, R.; Derbyshire, G.; Kirkland, A.; Allinson, N.

2009-01-01

As part of a feasibility study into the use of novel electron detectors for X-ray photoelectron emission microscopes (XPEEM), we have characterised the imaging performance of a back-illuminated monolithic active pixel sensor (MAPS) operating under both integrating and counting modes for electrons in the energy range 10-20 keV. For integrating mode, we present the detective quantum efficiency (DQE), which shows marked improvements over conventional indirect detectors based on microchannel plates. We also present the modulation transfer function (MTF) and noise power spectrum (NPS), again demonstrating significantly improved performance. For counting mode, we present the quantum efficiency (QE) as a function of incident electron energy. We have evaluated the charge collection efficiency (CCE) and we thereby demonstrate the presence of a ∼200 nm thick dead layer that is linked with reduced CCE at low electron energies. Based on our findings, we believe that the MAPS technology is well matched to future XPEEM instruments using aberration correction.

A delta-rule model of numerical and non-numerical order processing.

Science.gov (United States)

Verguts, Tom; Van Opstal, Filip

2014-06-01

Numerical and non-numerical order processing share empirical characteristics (distance effect and semantic congruity), but there are also important differences (in size effect and end effect). At the same time, models and theories of numerical and non-numerical order processing developed largely separately. Currently, we combine insights from 2 earlier models to integrate them in a common framework. We argue that the same learning principle underlies numerical and non-numerical orders, but that environmental features determine the empirical differences. Implications for current theories on order processing are pointed out. PsycINFO Database Record (c) 2014 APA, all rights reserved.
Milano rohelised võrsed / Piret Veigel, Varje Talivee

Index Scriptorium Estoniae

Veigel, Piret, 1961-

2005-01-01

13.-19. IV 2005 toimunud Milano mööblimessist. Noorte talentide konkursil Design Report Award 2005 võitis peapreemia jaapani büroo Yoneya, Kimizuka & Masuko valgusskulptuur Shadow Game. 20 värv. ill
Numerical and Experimental Analyses of Residual Stresses in

DEFF Research Database (Denmark)

Hansen, Jan Langkjær; Hattel, Jesper; Lorentzen, Torben

1999-01-01

Butt-welding in one pass with SMAW of two 10mm mild steel plates is investigated. In order to predict the residual stress fields associated with the welding procedure, a finite element model in 3D has been developed in ABAQUS. This model applies a sequential thermal and mechanical numerical...... analysis. In order to evaluate and refine the model parameters for the thermal analysis, the numerical results from this analysis are compared with experimental measurements of the temperature. To evaluate the predicted stress/strain fields, the mechanical model has been validated experimentally. This has...... been done using the novel non-destructive technique of neutron diffraction.The thermal model takes into account the moving heat source in the V-shaped weld. The heat source is modelled by filler material being added continuously in connection with a body flux. In order to obtain a more realistic weld...
Numerical modelling of the Concorde wake during ZEBRE

Energy Technology Data Exchange (ETDEWEB)

Gierens, K. [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Oberpfaffenhofen (Germany). Inst. fuer Physik der Atmosphaere

1997-12-31

Numerical simulations of the Concorde contrail during the ZEBRE experiment have been performed. The main goal of the simulations is to reproduce the fast vanishing of the contrail which disappeared 20-30 s after exhaust. It is difficult to evaporate ice crystals during the jet and vortex phase of the aircraft wake, when the exhaust products are trapped in the vortex cores. The trapping also excludes spatial dispersion of the ice crystals as an explanation of the short contrail lifetime. The disappearance of the contrail within 20-30 s requires that a substantial part of the exhaust gases escapes from the region that is later on trapped in the vortex cores. (author) 10 refs.
Numerical modelling of the Concorde wake during ZEBRE

Energy Technology Data Exchange (ETDEWEB)

Gierens, K [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Oberpfaffenhofen (Germany). Inst. fuer Physik der Atmosphaere

1998-12-31

Numerical simulations of the Concorde contrail during the ZEBRE experiment have been performed. The main goal of the simulations is to reproduce the fast vanishing of the contrail which disappeared 20-30 s after exhaust. It is difficult to evaporate ice crystals during the jet and vortex phase of the aircraft wake, when the exhaust products are trapped in the vortex cores. The trapping also excludes spatial dispersion of the ice crystals as an explanation of the short contrail lifetime. The disappearance of the contrail within 20-30 s requires that a substantial part of the exhaust gases escapes from the region that is later on trapped in the vortex cores. (author) 10 refs.
Systematic study of (n, p) reaction cross sections from the reaction threshold to 20 MeV

NARCIS (Netherlands)

Lalremruata, B.; Otuka, N.; Tambave, G. J.; Mulik, V. K.; Patil, B. J.; Dhole, S. D.; Saxena, A.; Ganesan, S.; Bhoraskar, V. N.

2012-01-01

The cross sections of Cr-nat(n, x)V-52, Cr-52(n, p)V-52, Cr-nat(n, x)V-53, Cr-53(n, p)V-53, Zn-nat(n, x)Cu-66, Zn-66(n, p)Cu-66, Zn-nat(n, x)Cu-68(m), Zn-68(n, p)Cu-68(m), Mo-nat(n, x)Nb-97(g), Mo-97(n, p)Nb-97(g), Mo-nat(n, x)Nb-97(m), Mo-97(n, p)Nb-97(m), Sn-nat(n, x)In-116(m1+m2), Sn-116(n,
Adiabatic invariants of the extended KdV equation

Energy Technology Data Exchange (ETDEWEB)

Karczewska, Anna [Faculty of Mathematics, Computer Science and Econometrics, University of Zielona Góra, Szafrana 4a, 65-246 Zielona Góra (Poland); Rozmej, Piotr, E-mail: p.rozmej@if.uz.zgora.pl [Institute of Physics, Faculty of Physics and Astronomy, University of Zielona Góra, Szafrana 4a, 65-246 Zielona Góra (Poland); Infeld, Eryk [National Centre for Nuclear Research, Hoża 69, 00-681 Warszawa (Poland); Rowlands, George [Department of Physics, University of Warwick, Coventry, CV4 7A (United Kingdom)

2017-01-30

When the Euler equations for shallow water are taken to the next order, beyond KdV, momentum and energy are no longer exact invariants. (The only one is mass.) However, adiabatic invariants (AI) can be found. When the KdV expansion parameters are zero, exact invariants are recovered. Existence of adiabatic invariants results from general theory of near-identity transformations (NIT) which allow us to transform higher order nonintegrable equations to asymptotically equivalent (when small parameters tend to zero) integrable form. Here we present a direct method of calculations of adiabatic invariants. It does not need a transformation to a moving reference frame nor performing a near-identity transformation. Numerical tests show that deviations of AI from constant values are indeed small. - Highlights: • We suggest a new and simple method for calculating adiabatic invariants of second order wave equations. • It is easy to use and we hope that it will be useful if published. • Interesting numerics included.
Playing Linear Numerical Board Games Promotes Low-Income Children's Numerical Development

Science.gov (United States)

Siegler, Robert S.; Ramani, Geetha B.

2008-01-01

The numerical knowledge of children from low-income backgrounds trails behind that of peers from middle-income backgrounds even before the children enter school. This gap may reflect differing prior experience with informal numerical activities, such as numerical board games. Experiment 1 indicated that the numerical magnitude knowledge of…
Synthesis of national reports for Rio+20

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-01-15

In the lead up to the United Nations Conference on Sustainable Development (Rio+20), which took place in Brazil in June 2012, there were numerous efforts in countries around the world to help governments, civil society organizations and individuals prepare for the event. One of the more significant efforts led by UNDP in collaboration with the United Nations Department of Economic and Social Affairs (UN DESA) was a support programme to 72 countries across all regions to build a consensus on national views around the themes and objectives of the Rio+20 Conference. This report highlights significant advances in sustainable development from almost 60 country reports and underscores the challenges and bottlenecks to moving beyond the economic-led growth strategies of the past 20 years.
People and things. CERN Courier, September 1980, v. 20(6)

International Nuclear Information System (INIS)

Anon.

1980-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: ; At the 66th Session of the CERN Council on 27 June the project to construct a large electron-positron storage ring, known as LEP, as Europe's next major facility for high energy physics research was formally presented for the first time; A meeting, organized jointly by DESY and the Max-Planck Institute in Munich, will be held in Munich on 24-25 October for those interested in the construction and later use of the proposed HERA electron-proton colliding ring; On 19 June papers were signed at Fermilab extending the collaboration in high energy physics between the USA and China which first took formal form early in 1979; At the end of May, a second International Symposium on the History of Particle Physics was held at Fermilab; The Government of the Canadian province of Alberta has given interim funding for the conceptual design of an accelerator complex which will consist primarily of a heavy ion synchrotron giving ions up to A = 40 and 600 MeV/amu. The project has the acronym 'MARIA' — Medical Accelerator Research Institute, Alberta; On 16, 17 June a Cryogenic Workshop was held at Fermilab to focus on helium refrigeration systems for superconducting high energy accelerators. ; A few years ago, when the 5 GeV electron synchrotron NINA at the Daresbury Laboratory was in its final years of operation, the magnets of NINA seemed to be built into every new accelerator proposal then emerging in Europe. Now, with the machine closed down, the magnets remain available and Daresbury would like to see them in action again if anyone could make good use of them
Evidence for two narrow pp resonances at 2020 MeV and 2200 MeV

CERN Document Server

Benkheiri, P; Bouquet, B; Briandet, P; D'Almagne, B; Dang-Vu, C; De Rosny, G; Eisenstein, B I; Ferrer, A; Fleury, P; Grossetête, B; Irwin, G; Jacholkowski, A; Lahellec, A; Nguyen, H; Petroff, P; Richard, F; Rivet, P; Roudeau, P; Rougé, A; Rumpf, M; Six, J; Thénard, J M; Treille, D; Volte, A; Yaffe, D; Yiou, T P; Yoshida, H

1977-01-01

From the study of the reaction pi /sup -/p to p/sub F/pp pi /sup -/ using a fast proton (p/sub F/) trigger device in the CERN Omega spectrometer, the authors find evidence for two narrow pp states produced mainly in association with a Delta degrees (1232) and a N degrees (1520). The statistical significance of each peak is greater than 6 standard deviations. Masses and natural widths of these resonances are respectively M/sub 1/=2020+or-3 MeV, Gamma /sub 1 /=24+or-12 MeV and M/sub 2/=2204+or-5 MeV, Gamma /sub 2/=16/sub -16 //sup +20/ MeV. The data are consistent with a small production of the narrow approximately 1935 MeV resonance already reported. Production cross sections for these new pp resonances are given. (8 refs).
The tensor analyzing power T20 in the dd → 3Hen and dd → 3Hp reactions at the energies 140, 200 and 270 MeV and at zero degree

International Nuclear Information System (INIS)

Ladygin, V.P.; Uesaka, T.; Saito, T.

2005-01-01

The data on the tensor analyzing power T 20 in the dd → 3 Hen and dd → 3 Hp reactions at 140, 200 and 270 MeV of the deuteron kinetic energy and at zero degree obtained at RIKEN Accelerator Research Facility are presented. The observed positive sign of T 20 clearly demonstrates the sensitivity to the D/S wave ratios in the 3 He and 3 H in the energy domain of the measurements. The T 20 data for the 3 He-n and 3 H-p channels are in agreement within experimental accuracy
COLOUR CENTRES IN OXIDESEffect of the V- ↔ V= transformation on positron annihilation lifetime spectra in MgO

OpenAIRE

Mallard , W.; Hsu , F.; Vance , E.

1980-01-01

Positron annihilation lifetime spectra have been measured in MgO : OD- containing ~ 20 ppm of isolated cation vacancies produced by electron irradiation. For the V- ↔ V= transformation, the intensities of the longer-lived lifetime components were enhanced slightly when the vacancies trapped holes and reduced when holes were released.
Numerical abilities in fish: A methodological review.

Science.gov (United States)

Agrillo, Christian; Miletto Petrazzini, Maria Elena; Bisazza, Angelo

2017-08-01

The ability to utilize numerical information can be adaptive in a number of ecological contexts including foraging, mating, parental care, and anti-predator strategies. Numerical abilities of mammals and birds have been studied both in natural conditions and in controlled laboratory conditions using a variety of approaches. During the last decade this ability was also investigated in some fish species. Here we reviewed the main methods used to study this group, highlighting the strengths and weaknesses of each of the methods used. Fish have only been studied under laboratory conditions and among the methods used with other species, only two have been systematically used in fish-spontaneous choice tests and discrimination learning procedures. In the former case, the choice between two options is observed in a biologically relevant situation and the degree of preference for the larger/smaller group is taken as a measure of the capacity to discriminate the two quantities (e.g., two shoals differing in number). In discrimination learning tasks, fish are trained to select the larger or the smaller of two sets of abstract objects, typically two-dimensional geometric figures, using food or social companions as reward. Beyond methodological differences, what emerges from the literature is a substantial similarity of the numerical abilities of fish with those of other vertebrates studied. Copyright © 2017 Elsevier B.V. All rights reserved.
High energy density of Li3-xNaxV2(PO4)3/C cathode material with high rate cycling performance for lithium-ion batteries

Science.gov (United States)

Zuo, Zong-Lin; Deng, Jian-Qiu; Pan, Jin; Luo, Wen-Bin; Yao, Qing-Rong; Wang, Zhong-Min; Zhou, Huai-Ying; Liu, Hua-Kun

2017-07-01

A serials of micro-sized Li3-xNaxV2(PO4)3/C composite has been synthesized by sol-gel method, comprised of numerous primary nanocrystals. This structure can efficiently facilitate lithium-ion transport in secondary aggregated individual particles due to the short diffusion distance among primary nanocrystals, along with a high tap density. With the increasing of Na doping content, the structure evolution occurs in Li3-xNaxV2(PO4)3 from a single-phase structure to a two-phase structure. The appearance of rhombohedral phase can provide a larger free volume of the interstitial space, fastening ionic movement to offer an excellent high rate capability. Furthermore, Na doping can stabilize the rhombohedral structure of the V2(PO4)3 framework, leading to the remarkable cycling stability. Among all the composites, Li2.6Na0.4V2(PO4)3/C presents the best electrochemical performance with a high energy density of 478.8 Wh kg-1, delivering high initial discharge capacities of 121.6, 113.8 and 109.7 mAh g-1 at the rate of 5 C, 10 C and 20 C in a voltage range of 3.0 - 4.3 V, respectively. It also exhibit an excellent high rate cycling performance, with capacity retention of 85.9 %, 81.7 % and 76.5 % after 1000 cycles at the rate of 5 C, 10 C and 20 C in a voltage range of 3.0 - 4.3 V.
Tšernobõl põhjustab 90 000 vähisurma / Arko Olesk

Index Scriptorium Estoniae

Olesk, Arko, 1981-

2006-01-01

Vt. Postimees : na russkom jazõke 20. apr., lk. 9. Tuumajaama õnnetus 20 aasta eest Ukrainas Tšernobõlis tapab vähktõvega Euroopas ligikaudu 90 000 inimest, arvestab keskkonnaorganisatsiooni Greenpeace värske uurimus. Lisa: Eri hinnangud
Proton, deuteron, and triton emission at target rapidity in Au+Au collisions at 10.20A GeV: Spectra and directed flow

International Nuclear Information System (INIS)

Ashktorab, K.; Beavis, D.; Chasman, C.; Chen, Z.; Chu, Y.Y.; Cumming, J.B.; Debbe, R.; Gonin, M.; Gushue, S.; Levine, M.; Moskowitz, B.; Olness, J.; Remsberg, L.P.; Tannenbaum, M.J.; Videbaek, F.; Zhu, F.; Crawford, H.J.; Engelage, J.; Judd, E.; Chang, J.; Eldredge, W.; Fung, S.Y.; Seto, R.; Xu, G.; Zhu, Q.; Chi, C.; Cole, B.A.; Moulson, M.; Nagamiya, S.; Nayak, T.K.; Wang, F.Q.; Wang, Y.; Wu, Y.; Zajc, W.A.; Akiba, Y.; Hamagaki, H.; Homma, S.; Sako, H.; Kaneko, H.; Britt, H.C.; Cianciolo, V.; Luke, J.; Namboodiri, M.N.; Sangster, T.C.; Soltz, R.; Thomas, J.H.; Tonse, S.R.; Ahle, L.; Baker, M.D.; Heintzelman, G.; Ogilvie, C.A.; Steadman, S.G.; Stephans, G.S.; Sung, T.; Woodruff, D.S.; Zachary, D.; Hayano, R.S.; Shigaki, K.; Kumagai, A.; Kurita, K.; Miake, Y.; Ueno-Hayashi, S.; Yagi, K.; Kang, J.H.; Gaardhoje, J.J.; Hansen, A.G.; Hansen, L.

1998-01-01

Systematic results are presented on proton, deuteron, and triton emission from the target spectator region in collisions of 10.20A GeV gold projectiles with a gold target. A forward hodoscope utilizes detection of projectile spectator fragments to determine the orientation of the reaction plane, event by event. The directed flow left-angle p x right-angle is determined as a function of pseudorapidity. Projectile spectator energy is used to estimate impact parameters. Results are compared to current theoretical models ARC, ART, and RQMD. In all cases good agreement with theory is obtained for calculations utilizing a pure cascade without nuclear potential contributions. copyright 1998 The American Physical Society
The H(n,n) cross section in the 20 MeV to 350 MeV range

International Nuclear Information System (INIS)

1997-01-01

The differential H(n,n) cross section has been used as a standard relative to which other neutron emission cross sections, e.g., elastic or inelastic scattering, have been measured in several Mev region and these measured values are compared with the VL40 solution of R. Arndt, and R.L. Workman, Nuclear Data Standards for Nuclear Measurements, H. Conde (ed.). NEANDC-311, INDC (SEC)-101, 1992, p. 17. For hydrogen, the differential elastic scattering cross section can be directly related to the total cross section, since no other channels of importance are open below the pion production threshold at about 280 MeV (the capture and Bremsstrahlung cross section are very small). 16 refs, 3 figs
The Future of Family Medicine version 2.0: reflections from Pisacano scholars.

Science.gov (United States)

Doohan, Noemi C; Duane, Marguerite; Harrison, Bridget; Lesko, Sarah; DeVoe, Jennifer E

2014-01-01

The Future of Family Medicine (FFM) project has helped shape and direct the evolution of primary care medicine over the past decade. Pisacano Scholars, a group of leaders in family medicine supported by the American Board of Family Medicine, gathered for a 2-day symposium in April 2013 to explore the history of the FFM project and outline a vision for the next phase of this work-FFM version 2.0 (v2.0). After learning about the original FFM project (FFM v1.0), the group held interactive discussions using the World Café approach to conversational leadership. This commentary summarizes the discussions and highlights major themes relevant to FFM v2.0 identified by the group. The group endorsed the FFM v1.0 recommendations as still relevant and marvelled at the progress made toward achieving many of those goals. Most elements of FFM v1.0 have moved forward, and some have been incorporated into policy blueprints for reform. Now is the time to refocus attention on facets of FFM v1.0 not yet realized and to identify key aspects missing from FFM v1.0. The Pisacano Scholars are committed to moving the FFM goals forward and hope that this expression of the group's vision will help to do so.
Transverse and longitudinal event-by-event flow fluctuations of $v_1$−$v_4$ in 5.02 TeV Pb+Pb collisions with the ATLAS detector

CERN Document Server

Zhou, Mingliang; The ATLAS collaboration

2018-01-01

Multi-particle flow correlations in Pb+Pb collisions provide unique insight into the nature of event-by-event fluctuations of the initial eccentricity as well as final state dynamics in the transverse and longitudinal directions. This talk presents a detailed study of transverse flow fluctuations using 4 and 6-particle cumulants $v_n\\{4\\}$ and $v_n\\{6\\}$ for $n=1,2,3$ and 4. This includes several new results: the first measurement of a negative dipolar flow $v_1\\{4\\}$; a high-precision measurement of $v_4\\{4\\}$, changing sign around 20-25$\\%$ centrality; observation of an intriguing sign-change pattern of $v_2\\{4\\}$ and $v_2\\{6\\}$ in ultra-central collisions; a detailed study of the cumulant ratio $v_n\\{6\\}/v_n\\{4\\}$ which shows significant deviation of $v_2$ and $v_3$ from both Bessel-Gaussian and elliptic-power distributions. The three-subevent cumulant method is used to show that these results are unlikely to be due to non-flow effects. The talk also presents a detailed study of the longitudinal dynamics o...

Some links on this page may take you to non-federal websites. Their policies may differ from this site.