WorldWideScience

Sample records for hypothetical reactivity initiated

  1. Doppler reactivity uncertainties and their effect upon a hypothetical LOF accident

    International Nuclear Information System (INIS)

    Malloy, D.J.

    1976-01-01

    The statistical uncertainties and the major methodological errors which contribute to the Doppler feedback uncertainty were reviewed and investigated. Improved estimates for the magnitudes of each type of uncertainty were established. The generally applied reactivity feedback methodology has been extended by explicitly treating the coupling effect which exists between the various feedback components. The improved methodology was specifically applied to the coupling of Doppler and sodium void reactivities. In addition, the description of the temperature dependence of the Doppler feedback has been improved by the use of a two-constant formula on a global and regional basis. Feedback and coupling coefficients are presented as a first comparison of the improved and the currently applied methods. Further, the energy release which results from hypothetical disassembly accidents was simulated with a special response surface in the parametric safety evaluation code PARSEC. The impact of the improved feedback methodology and of Doppler coefficient uncertainties was illustrated by the usual parametric relationship between available work-energy and the Doppler coefficient. The work-energy was calculated with the VENUS-II disassembly code and was represented as a response surface in PARSEC. Additionally, the probability distribution for available work-energy, which results from the statistical uncertainty of the Doppler coefficient, was calculated for the current and the improved feedback methodology. The improved feedback description yielded about a 16 percent higher average value for the work-energy. A substantially larger increase is found on the high-yield end of the spectrum: the probability for work-energy above 500 MJ was increased by about a factor of ten

  2. Analysis of initial events following hypothetical criticality of a transport flask

    International Nuclear Information System (INIS)

    Barbry, F.; Bonhomme, C.; Brown, M.L.; Hague, P.; Mather, D.J.; Shaw, P.M.

    1984-01-01

    This report deals with the estimation of possible consequences, eg energy release, temperatures reached etc, of such a hypothetical accident in a particular notional transport package design. This particular study examines the situation if criticality occurs during unloading or refilling of a PWR flask. In the first instance, an idealised model has been chosen in order to develop the calculational techniques; it is not initself a realistic accident representation

  3. Transient debris freezing and potential wall melting during a severe reactivity initiated accident experiment

    International Nuclear Information System (INIS)

    El-Genk, M.S.; Moore, R.L.

    1981-01-01

    It is important to light water reactor (LWR) safety analysis to understand the transient freezing of molten core debris on cold structures following a hypothetical core meltdown accident. The purpose of this paper is to (a) present the results of a severe reactivity initiated accident (RIA) in-pile experiment with regard to molten debris distribution and freezing following test fuel rod failure, (b) analyze the transient freezing of molten debris (primarily a mixture of UO/sub 2/ fuel and Zircaloy cladding) deposited on the inner surface of the test shroud wall upon rod failure, and (c) assess the potential for wall melting upon being contacted by the molten debris. 26 refs

  4. Calculation of isodose curves from initial neutron radiation of a hypothetical nuclear explosion using Monte Carlo Method

    Energy Technology Data Exchange (ETDEWEB)

    Medeiros, Marcos P.C.; Rebello, Wilson F.; Andrade, Edson R., E-mail: rebello@ime.eb.br, E-mail: daltongirao@yahoo.com.br [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Secao de Engenharia Nuclear; Silva, Ademir X., E-mail: ademir@nuclear.ufrj.br [Corrdenacao dos Programas de Pos-Graduacao em Egenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear

    2015-07-01

    Nuclear explosions are usually described in terms of its total yield and associated shock wave, thermal radiation and nuclear radiation effects. The nuclear radiation produced in such events has several components, consisting mainly of alpha and beta particles, neutrinos, X-rays, neutrons and gamma rays. For practical purposes, the radiation from a nuclear explosion is divided into {sup i}nitial nuclear radiation{sup ,} referring to what is issued within one minute after the detonation, and 'residual nuclear radiation' covering everything else. The initial nuclear radiation can also be split between 'instantaneous or 'prompt' radiation, which involves neutrons and gamma rays from fission and from interactions between neutrons and nuclei of surrounding materials, and 'delayed' radiation, comprising emissions from the decay of fission products and from interactions of neutrons with nuclei of the air. This work aims at presenting isodose curves calculations at ground level by Monte Carlo simulation, allowing risk assessment and consequences modeling in radiation protection context. The isodose curves are related to neutrons produced by the prompt nuclear radiation from a hypothetical nuclear explosion with a total yield of 20 KT. Neutron fluency and emission spectrum were based on data available in the literature. Doses were calculated in the form of ambient dose equivalent due to neutrons H*(10){sub n}{sup -}. (author)

  5. Calculation of isodose curves from initial neutron radiation of a hypothetical nuclear explosion using Monte Carlo Method

    International Nuclear Information System (INIS)

    Medeiros, Marcos P.C.; Rebello, Wilson F.; Andrade, Edson R.; Silva, Ademir X.

    2015-01-01

    Nuclear explosions are usually described in terms of its total yield and associated shock wave, thermal radiation and nuclear radiation effects. The nuclear radiation produced in such events has several components, consisting mainly of alpha and beta particles, neutrinos, X-rays, neutrons and gamma rays. For practical purposes, the radiation from a nuclear explosion is divided into i nitial nuclear radiation , referring to what is issued within one minute after the detonation, and 'residual nuclear radiation' covering everything else. The initial nuclear radiation can also be split between 'instantaneous or 'prompt' radiation, which involves neutrons and gamma rays from fission and from interactions between neutrons and nuclei of surrounding materials, and 'delayed' radiation, comprising emissions from the decay of fission products and from interactions of neutrons with nuclei of the air. This work aims at presenting isodose curves calculations at ground level by Monte Carlo simulation, allowing risk assessment and consequences modeling in radiation protection context. The isodose curves are related to neutrons produced by the prompt nuclear radiation from a hypothetical nuclear explosion with a total yield of 20 KT. Neutron fluency and emission spectrum were based on data available in the literature. Doses were calculated in the form of ambient dose equivalent due to neutrons H*(10) n - . (author)

  6. Kinematics of self-initiated and reactive karate punches.

    Science.gov (United States)

    Martinez de Quel, Oscar; Bennett, Simon J

    2014-03-01

    This study investigated whether within-task expertise affects the reported asymmetry in execution time exhibited in reactive and self-initiated movements. Karate practitioners and no-karate practitioners were compared performing a reverse punch in reaction to an external stimulus or following the intention to produce a response (self-initiated). The task was completed following the presentation of a specific (i.e., life-size image of opponent) or general stimulus and in the presence of click trains or white noise. Kinematic analyses indicated reactive movement had shorter time to peak velocity and movement time, as well as greater accuracy than self-initiated movement. These differences were independent of participant skill level although peak velocity was higher in the karate practice group than in the no-karate practice group. Reaction time (RT) of skilled participants was facilitated by a specific stimulus. There was no effect on RT or kinematic variables of the different type of auditory cues. The results of this study indicate that asymmetry in execution time of reactive and self-initiated movement holds irrespective of within-task expertise and stimulus specificity. This could have implications for training of sports and/or relearning of tasks that require rapid and accurate movements to intercept/contact a target.

  7. Predicting Reactive Transport Dynamics in Carbonates using Initial Pore Structure

    Science.gov (United States)

    Menke, H. P.; Nunes, J. P. P.; Blunt, M. J.

    2017-12-01

    Understanding rock-fluid interaction at the pore-scale is imperative for accurate predictive modelling of carbon storage permanence. However, coupled reactive transport models are computationally expensive, requiring either a sacrifice of resolution or high performance computing to solve relatively simple geometries. Many recent studies indicate that initial pore structure many be the dominant mechanism in determining the dissolution regime. Here we investigate how well the initial pore structure is predictive of distribution and amount of dissolution during reactive flow using particle tracking on the initial image. Two samples of carbonate rock with varying initial pore space heterogeneity were reacted with reservoir condition CO2-saturated brine and scanned dynamically during reactive flow at a 4-μm resolution between 4 and 40 times using 4D X-ray micro-tomography over the course of 1.5 hours using μ-CT. Flow was modelled on the initial binarized image using a Navier-Stokes solver. Particle tracking was then run on the velocity fields, the streamlines were traced, and the streamline density was calculated both on a voxel-by-voxel and a channel-by-channel basis. The density of streamlines was then compared to the amount of dissolution in subsequent time steps during reaction. It was found that for the flow and transport regimes studied, the streamline density distribution in the initial image accurately predicted the dominant pathways of dissolution and gave good indicators of the type of dissolution regime that would later develop. This work suggests that the eventual reaction-induced changes in pore structure are deterministic rather than stochastic and can be predicted with high resolution imaging of unreacted rock.

  8. Reactivity estimation during a reactivity-initiated accident using the extended Kalman filter

    International Nuclear Information System (INIS)

    Busquim e Silva, R.; Marques, A.L.F.; Cruz, J.J.; Shirvan, K.; Kazimi, M.S.

    2015-01-01

    Highlights: • The EKF is modeled using sophisticate strategies to make the algorithm robust and accurate. • For a supercritical reactor under RIA, the EKF presents better results compared to IPK method independent of magnitude of the noise loads. • A sensitivity for five distinct carry-over effects indicates that the EKF is less sensitive to the different set of noise. • Although the P3D/R5 simulates the reactivity using a spatial kinetics method, the use of PKRE to model the EKF provides accurate results. • The reactivity’s standard deviation is higher for the IKF method. • Under HZP (slow power response) the IPK reactivity varies widely from positive to negative values (add extra difficulty to controlling the supercritical reactor): the EKF method does not have similar behavior under the same conditions (better controlling the operation). - Abstract: This study implements the extended Kalman filter (EKF) to estimate the nuclear reactor reactivity behavior under a reactivity-initiated accident (RIA). A coupled neutronics/thermal hydraulics code PARCS/RELAP5 (P3D/R5) simulates a control rod assembly ejection (CRE) on a traditional 2272 MWt PWR to generate the reactor power profile. A MATLAB script adds random noise to the simulated reactor power. For comparison, the inverse point kinetics (IPK) deterministic method is also implemented. Three different cases of CRE are simulated and the EKF, IPK and the P3D/R5 reactivity are compared. It was found that the EKF method presents better results compared to the IPK method. Furthermore, under a RIA due to small reactivity insertion and slow power response, the IPK reactivity varies widely from positive to negative, which may add extra difficulty to the task of controlling a supercritical reactor. This feature is also confirmed by a sensitivity analysis for five different noise loads and three distinct noise measurements standard deviations (SD)

  9. Nuclear Fuel Behaviour during Reactivity Initiated Accidents. Workshop Proceedings

    International Nuclear Information System (INIS)

    2010-01-01

    A reactivity initiated accident (RIA) is a nuclear reactor accident that involves an unwanted increase in fission rate and reactor power. The power increase may damage the reactor core. The main objective of the workshop was to review the current status of the experimental and analytical studies of the fuel behavior during the RIA transients in PWR and BWR reactors and the acceptance criteria for RIA in use and under consideration. The workshop was organized in an opening session and 5 technical sessions: 1) Recent experimental results and experimental techniques used; 2) Modelling and Data Interpretation; 3) Code Assessment; 4) RIA Core Analysis and 5) Revision and application of safety criteria

  10. Reactivity initiated accidents and loss of shutdown - 20 years later

    International Nuclear Information System (INIS)

    Luxat, J.C.

    2007-01-01

    A review of the safety of Ontario's nuclear power reactors was conducted in 1987 after the Chernobyl accident. As part of this review an analysis was performed of a Loss of Coolant Accident in a Pickering A unit with coincident failure to shutdown. This analysis showed that the power excursion was halted by channel and calandria vessel failures leading to moderator fluid displacement. The containment structure did not fail and, at worst might suffer minor cracking at the top of the dome of the reactor building. Overall the dose consequences of such an accident were no worse than the limiting design basis dual failure event. In the intervening twenty years following this analysis, Significant experimental information has been obtained that relates to power pulse behaviour. This information, together with conservatisms in he original analysis, are reviewed and assessed in this paper. In addition, the issue of reactivity initiated events in other reactor types is reviewed to identify the reactor design characteristics that are of importance in these events. Contrary to popular belief the existence of positive coolant void reactivity is not as significant a factor as it is sometimes stated to be. On balance, with appropriate design measures, no one reactor type can be claimed to be 'more safe' than another. The underlying basis for this statement is articulated in this paper. (author)

  11. Applicability of modified burst test data to reactivity initiated accident

    Energy Technology Data Exchange (ETDEWEB)

    Yueh, K., E-mail: yuehky@hotmail.com

    2017-05-15

    A comprehensive irradiated cladding mechanical property dataset was generated by a recently developed modified burst test (MBT) under reactivity initiated accident (RIA) loading conditions [1,2]. The test data contains a wide range of test conditions that could bridge the gap between fast transient test reactor data (short pulse and/or low temperature) and prototypical commercial reactor conditions. This paper documents an evaluation performed to demonstrate the applicability of the MBT data to fuel cladding performance under RIA conditions. The current effort includes a comparison of calculated fuel cladding failure/burst strain for tests conducted at the Japan Atomic Energy Agency's (JAEA) Nuclear Safety Research Reactor (NSRR) to the MBT dataset, and an evaluation of potential mechanisms on how some NSRR tests survived beyond the cladding loading capacity. A simple shell model, coupled with temperature output from the Falcon fuel performance code, was used to calculate the fuel pellet thermal expansion of NSRR tests at the point of failure. The calculated fuel pellet thermal expansion correlates well directly with the MBT data at similar loading conditions. A 3-dimensional (3D) finite element analysis (FEA) model was used to evaluate fuel movement potential during a RIA. The evaluation indicates fuel relocation into the pellet chamfer and later into the dish is possible once a temperature threshold is reached before cladding failure and thus could significantly increase the fuel rod energy absorption capacity in a RIA event.

  12. The development of a model to study the thermal behaviour of the coolant in the blind elements of a fast sodium-cooled breeder in the case of a severe hypothetical accident during the initial phase

    International Nuclear Information System (INIS)

    Genter, G.

    1981-03-01

    The enthalpy level of the coolant is studied in the interior of gaps and special elements of a fast sodium coded breeder reactor during the initial and the final stages of a hypothetical accident. For this purpose numerical models are presented to calculate the heat transport in the special element on the basis of heat conduction and axial convection. (orig./RW) [de

  13. Influence of initial conditions on rod behaviour during boiling crisis phase following a reactivity initiated accident

    International Nuclear Information System (INIS)

    Georgenthum, V.; Sugiyama, T.

    2010-01-01

    In the frame of their research programs on high burn-up fuel safety, the French Institute for Radioprotection and Nuclear Safety (IRSN) and the Japan Atomic Energy Agency (JAEA) performed a large set of tests devoted to the study of PWR fuel rod behavior during Reactivity Initiated Accident (RIA) respectively in the CABRI reactor and in the NSRR reactor. The reactor test conditions are different in terms of coolant nature, temperature and pressure. In the CABRI reactor, tests were performed until now with sodium coolant at 280 Celsius degrees and 3 bar. In the NSRR reactor most of the tests were performed with stagnant water at 20 C. degrees and atmospheric pressure but recently a new high temperature high pressure capsule has been developed which allows to performed tests at up to 280 Celsius degrees and 70 bar. The paper discusses the influence of test conditions on rod behaviour during boiling phase, based on tests results and SCANAIR code calculations. The study shows that when the boiling crisis is reached, the initial inner and outer rod pressure have an essential impact on the clad straining and possible ballooning. The analysis of the different test conditions makes it possible to discriminate the influence of initial conditions on the different phases of the transient and is useful for modelling and code development. (authors)

  14. Development and verification of an efficient spatial neutron kinetics method for reactivity-initiated event analyses

    International Nuclear Information System (INIS)

    Ikeda, Hideaki; Takeda, Toshikazu

    2001-01-01

    A space/time nodal diffusion code based on the nodal expansion method (NEM), EPISODE, was developed in order to evaluate transient neutron behavior in light water reactor cores. The present code employs the improved quasistatic (IQS) method for spatial neutron kinetics, and neutron flux distribution is numerically obtained by solving the neutron diffusion equation with the nonlinear iteration scheme to achieve fast computation. A predictor-corrector (PC) method developed in the present study enabled to apply a coarse time mesh to the transient spatial neutron calculation than that applicable in the conventional IQS model, which improved computational efficiency further. Its computational advantage was demonstrated by applying to the numerical benchmark problems that simulate reactivity-initiated events, showing reduction of computational times up to a factor of three than the conventional IQS. The thermohydraulics model was also incorporated in EPISODE, and the capability of realistic reactivity event analyses was verified using the SPERT-III/E-Core experimental data. (author)

  15. Thermal chemical-mechanical reactive flow model of shock initiation in solid explosives

    International Nuclear Information System (INIS)

    Nicholls, A.L. III; Tarver, C.M.

    1998-01-01

    The three dimensional Arbitrary Lagrange Eulerian hydrodynamic computer code ALE3D with fully coupled thermal-chemical-mechanical material models provides the framework for the development of a physically realistic model of shock initiation and detonation of solid explosives. The processes of hot spot formation during shock compression, subsequent ignition of reaction or failure to react, growth of reaction in individual hot spots, and coalescence of reacting hot spots during the transition to detonation can now be modeled using Arrhenius chemical kinetic rate laws and heat transfer to propagate the reactive flow. This paper discusses the growth rates of reacting hot spots in HMX and TATB and their coalescence during shock to detonation transition. Hot spot deflagration rates are found to be fast enough to consume explosive particles less than 10 mm in diameter during typical shock duration times, but larger particles must fragment and create more reactive surface area in order to be rapidly consumed

  16. SeSBench - An initiative to benchmark reactive transport models for environmental subsurface processes

    Science.gov (United States)

    Jacques, Diederik

    2017-04-01

    As soil functions are governed by a multitude of interacting hydrological, geochemical and biological processes, simulation tools coupling mathematical models for interacting processes are needed. Coupled reactive transport models are a typical example of such coupled tools mainly focusing on hydrological and geochemical coupling (see e.g. Steefel et al., 2015). Mathematical and numerical complexity for both the tool itself or of the specific conceptual model can increase rapidly. Therefore, numerical verification of such type of models is a prerequisite for guaranteeing reliability and confidence and qualifying simulation tools and approaches for any further model application. In 2011, a first SeSBench -Subsurface Environmental Simulation Benchmarking- workshop was held in Berkeley (USA) followed by four other ones. The objective is to benchmark subsurface environmental simulation models and methods with a current focus on reactive transport processes. The final outcome was a special issue in Computational Geosciences (2015, issue 3 - Reactive transport benchmarks for subsurface environmental simulation) with a collection of 11 benchmarks. Benchmarks, proposed by the participants of the workshops, should be relevant for environmental or geo-engineering applications; the latter were mostly related to radioactive waste disposal issues - excluding benchmarks defined for pure mathematical reasons. Another important feature is the tiered approach within a benchmark with the definition of a single principle problem and different sub problems. The latter typically benchmarked individual or simplified processes (e.g. inert solute transport, simplified geochemical conceptual model) or geometries (e.g. batch or one-dimensional, homogeneous). Finally, three codes should be involved into a benchmark. The SeSBench initiative contributes to confidence building for applying reactive transport codes. Furthermore, it illustrates the use of those type of models for different

  17. Study on light water reactor fuel behavior under reactivity initiated accident condition in TREAT

    International Nuclear Information System (INIS)

    Ohnishi, Nobuaki; Ishijima, Kiyomi; Ochiai, Masaaki; Tanzawa, Sadamitsu; Uemura, Mutsumi

    1981-05-01

    This report reviews the results of the fuel failure experiments performed in TREAT in the U.S.A. simulating Reactivity Initiated Accidents. One of the main purposes of the TREAT experiments is the study of the fuel failure behavior, and the other is the study of the molten fuel-water coolant interaction and the consequent hydrogen behavior. This report mainly shows the results of the TREAT experiments studying the fuel failure behavior in Light Water Reactor, and then it describes the fuel failure threshold and the fuel failure mechanism, considering the results of the photographic experiments of the fuel failure behavior with transparent capsules. (author)

  18. Out-of pile mechanical test: simulating reactivity initiated accident (RIA) of zircaloy-4 cladding tube

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Myung Ho; Kim, Jun Hwan; Choi, Byoung Kwon; Jeong, Young Hwan [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    2004-07-01

    The ejection or drop of a control rod in a reactivity initiated accident (RIA) causes a sudden increase in reactor power and in turn deposits a large amount of energy into the fuel. In a RIA, cladding tubes bear thermal expansion due to sudden reactivity and may fail from the resulting mechanical damage. Thus, RIA can be one of the safety margin reducers because the oxide on the tubes makes their thickness to support the load less as well as hydrides from the corrosion reduce the ductility of the tubes. In a RIA, the peak of reactor power from reactivity change is about 0.1m second and the temperature of the cladding tubes increases up to 1000 .deg. C in several seconds. Although it is hard to fully simulate the situation, several attempts to measure the change of mechanical properties under a RIA situation has done using a reduction coil, ring tension tests with high speed. This research was done to see the effect of oxide on the change of circumferential strength and ductility of Zircaloy-4 tubes in a RIA. The ring stretch tensile tests were performed with the strain rate of 1/sec and 0.01/s to simulate a transient of the cladding tube under a RIA. Since the test results of the ring tensile test are very sensitive to the lubricant, the tests were also carried out to select a suitable lubricant before the test of oxided specimens.

  19. Large-Scale Reactive Atomistic Simulation of Shock-induced Initiation Processes in Energetic Materials

    Science.gov (United States)

    Thompson, Aidan

    2013-06-01

    Initiation in energetic materials is fundamentally dependent on the interaction between a host of complex chemical and mechanical processes, occurring on scales ranging from intramolecular vibrations through molecular crystal plasticity up to hydrodynamic phenomena at the mesoscale. A variety of methods (e.g. quantum electronic structure methods (QM), non-reactive classical molecular dynamics (MD), mesoscopic continuum mechanics) exist to study processes occurring on each of these scales in isolation, but cannot describe how these processes interact with each other. In contrast, the ReaxFF reactive force field, implemented in the LAMMPS parallel MD code, allows us to routinely perform multimillion-atom reactive MD simulations of shock-induced initiation in a variety of energetic materials. This is done either by explicitly driving a shock-wave through the structure (NEMD) or by imposing thermodynamic constraints on the collective dynamics of the simulation cell e.g. using the Multiscale Shock Technique (MSST). These MD simulations allow us to directly observe how energy is transferred from the shockwave into other processes, including intramolecular vibrational modes, plastic deformation of the crystal, and hydrodynamic jetting at interfaces. These processes in turn cause thermal excitation of chemical bonds leading to initial chemical reactions, and ultimately to exothermic formation of product species. Results will be presented on the application of this approach to several important energetic materials, including pentaerythritol tetranitrate (PETN) and ammonium nitrate/fuel oil (ANFO). In both cases, we validate the ReaxFF parameterizations against QM and experimental data. For PETN, we observe initiation occurring via different chemical pathways, depending on the shock direction. For PETN containing spherical voids, we observe enhanced sensitivity due to jetting, void collapse, and hotspot formation, with sensitivity increasing with void size. For ANFO, we

  20. Hanford ferrocyanide waste chemistry and reactivity preliminary catalyst and initiator screening studies

    International Nuclear Information System (INIS)

    Scheele, R.D.; Bryan, S.A.; Johnston, J.W.; Tingey, J.M.; Burger, L.L.; Hallen, R.T.

    1992-05-01

    During the 1950s, ferrocyanide was used to scavenge radiocesium from aqueous nitrate-containing Hanford wastes. During the production of defense materials and while these wastes were stored in high-level waste tanks at the Hanford Site, some of these wastes were likely mixed with other waste constituents and materials. Recently, Pacific Northwest Laboratory (PNL) was commissioned by Westinghouse Hanford Company (WHC) to investigate the chemical reactivity of these ferrocyanide-bearing wastes. Because of known or potential thermal reactivity hazards associated with ferrocyanide- and nitrate-bearing wastes, and because of the potential for different materials to act as catalysts or initiators of the reactions about which there is concern, we at PNL have begun investigating the effects of the other potential waste constituents. This report presents the results of a preliminary screening study to identify classes of materials that might be in the Hanford high-level waste tanks and that could accelerate or reduce the starting temperature of the reaction(s) of concern. We plan to use the resulted of this study to determine which materials or class of materials merit additional research

  1. Analysis of molten fuel-coolant interaction during a reactivity-initiated accident experiment

    International Nuclear Information System (INIS)

    El-Genk, M.S.; Hobbins, R.R.

    1981-01-01

    The results of a reactivity-initiated accident experiment, designated RIA-ST-4, are discussed and analyzed with regard to molten fuel-coolant interaction (MFCI). In this experiment, extensive amounts of molten UO 2 fuel and zircaloy cladding were produced and fragmented upon mixing with the coolant. Coolant pressurization up to 35 MPa and coolant overheating in excess of 940 K occurred after fuel rod failure. The initial coolant conditions were similar to those in boiling water reactors during a hot startup (that is, coolant pressure of 6.45 MPa, coolant temperature of 538 K, and coolant flow rate of 85 cm 3 /s). It is concluded that the high coolant pressure recorded in the RIA-ST-4 experiment was caused by an energetic MFCI and was not due to gas release from the test rod at failure, Zr/water reaction, or to UO 2 fuel vapor pressure. The high coolant temperature indicated the presence of superheated steam, which may have formed during the expansion of the working fluid back to the initial coolant pressure; yet, the thermal-to-mechanical energy conversion ratio is estimated to be only 0.3%

  2. Reactivity initiated accident analyses for the safety assessment of upgraded JRR-3

    International Nuclear Information System (INIS)

    Harami, Taikan; Uemura, Mutsumi; Ohnishi, Nobuaki

    1984-08-01

    JRR-3, currently a heavy water moderated and cooled 10 MW reactor, is to be upgraded to a light water moderated and cooled, heavy water reflected 20 MW reactor. This report describes the analytical results of reactivity initiated accidents for the safety assessment of upgraded JRR-3. The following five cases have been selected for the assessment; (1) uncontrolled control rod withdrawal from zero power, (2) uncontrolled control rod withdrawal from full power, (3) removal of irradiation samples, (4) increase of primary coolant flow, (5) failure of heavy water tank. Parameter studies have been made for each of the above cases to cover possible uncertainties. All analyses have been made by a computer code EUREKA-2. The results show that the safety criteria for upgraded JRR-3 are all met and the adequacy of the design is confirmed. (author)

  3. Out-of-pile test of zirconium cladding simulating reactivity initiated accident

    Energy Technology Data Exchange (ETDEWEB)

    Kim, J. H.; Lee, M. H.; Choi, B. K.; Bang, J. K.; Jung, Y. H. [KAERI, Taejon (Korea, Republic of)

    2004-07-01

    Mechanical properties of zirconium cladding such as Zircaloy-4 and advanced cladding were evaluated by ring tension test to simulate Reactivity-Initiated Accident (RIA) as an out-pile test. Cladding was hydrided by means of charging hydrogen up to 1000ppm to simulate high-burnup situation, finally fabricated to circumferential tensile specimen. Ring tension test was carried out from 0.01 to 1/sec to keep pace with actual RIA event. The results showed that mechanical strength of zirconium cladding increased at the value of 7.8% but ductility decreased at the 34% as applied strain rate and absorbed hydrogen increased. Further activities regarding out-of-pile testing plans for simulated high-burnup cladding were discussed in this paper.

  4. Experiment data report for Test RIA 1-2 (Reactivity Initiated Accident Test Series)

    International Nuclear Information System (INIS)

    Zimmermann, C.L.; White, C.E.; Evans, R.P.

    1979-06-01

    Recorded test data are presented for the second of six planned tests in the Reactivity Initiated Accident (RIA) Test Series I, Test RIA 1-2. This test, conducted at the Power Burst Facility, had the following objectives: (1) characterize the response of preirradiated fuel rods during an RIA event conducted at boiling water reactor hot-startup conditions; and (2) evaluate the effect of rod internal pressure on preirradiated fuel rod response during an RIA event. The data from Test RIA 1-2 are graphed in engineering units and have been appraised for quality and validity. These uninterpreted data are presented for use in the nuclear fuel behavior research field before detailed analysis and interpretation have been completed

  5. Initial growth and texture formation during reactive magnetron sputtering of TiN on Si(111)

    CERN Document Server

    Li, T Q; Tsuji, Y; Ohsawa, T; Komiyama, H

    2002-01-01

    The initial growth and texture formation mechanism of titanium nitride (TiN) films were investigated by depositing TiN films on (111) silicon substrates by using reactive magnetron sputtering of a Ti metallic target under a N sub 2 /Ar atmosphere, and then analyzing the films in detail by using transmission electron microscopy (TEM) and x-ray diffraction (XRD). Two power sources for the sputtering, dc and rf, were compared. At the initial growth stage, a continuous amorphous film containing randomly oriented nuclei was observed when the film thickness was about 3 nm. The nuclei grew and formed a polycrystalline layer when the film thickness was about 6 nm. As the film grew further, its orientation changed depending on the deposition conditions. For dc sputtering, the appearance of (111) or (200)-preferred orientations depended on the N sub 2 partial pressure, and the intensity of the preferred orientation increased with increasing film thickness. For rf sputtering, however, when the film thickness was small (...

  6. Modelling Reactivity-Initiated-Accident Experiments With Falcon And SCANAIR: A Comparison Exercise

    International Nuclear Information System (INIS)

    Romano, A.; Wallin, H.; Zimmermann, M.A.

    2005-01-01

    A critical assessment is made of the state-of-the-art fuel performance code FALCON in the context of selected Reactivity Initiated Accident (RIA) experiments from the CABRI REP Na series, and contrasts its predictions against those of the extensively benchmarked SCANAIR (Version 3.2) code. The thermal fields in the fuel and cladding, the clad mechanical deformation, and the Fission Gas Release (FGR) are adopted as 'Figures of Merit' by which to judge code performance. Particular attention is paid to the importance of fission-gas-induced clad deformation (which is modelled in SCANAIR, but not in FALCON), relative to that driven by the fuel thermal expansion (which is modelled by both codes). The thermal fields calculated by the codes are in good agreement with each other, especially during the initial stages of the transients --- the adiabatic phase. Larger discrepancies are observed at later times, and are due to the different models applied to calculate the gap conductance. FALCON predicts clad permanent deformations at the end of the transients with a maximum deviation from the experimental measurements of about 20%. Generally, the code always tends to underpredict the measurements. SCANAIR performs similarly, but grossly overpredicts the permanent clad strain for the case involving a very energetic pulse. The fission-gas-driven clad deformation is only relevant for very fast pulse energy injection cases, which are not prototypical of the RIA transients expected in PWRs. The FGR models in FALCON do not capture the mechanism of 'burst-release' in the RIA transients, having been developed for steady-state irradiation conditions. This also explains why they performed poorly when applied to the fast-transient cases analyzed here. In contrast, the FGR results from SCANAIR are in satisfactory agreement with the experimental results. (author)

  7. Behavior of irradiated ATR/MOX fuel under reactivity initiated accident conditions (Joint research)

    International Nuclear Information System (INIS)

    Sasajima, Hideo; Fuketa, Toyoshi; Nakamura, Takehiko; Nakamura, Jinichi; Uetsuka, Hiroshi

    2000-03-01

    Pulse irradiation experiments with irradiated ATR/MOX fuel rods of 20 MWd/kgHM were conducted at the NSRR in JAERI to study the transient behavior of MOX fuel rod under reactivity initiated accident conditions. Four pulse irradiation experiments were performed with peak fuel enthalpy ranging from 335 J/g to 586 J/g, resulted in no failure of fuel rods. Deformation of the fuel rods due to PCMI occurred in the experiments with peak fuel enthalpy above 500 J/g. Significant fission gas release up to 20% was measured by rod puncture measurement. The generation of fine radial cracks in pellet periphery, micro-cracks and boundary separation over the entire region of pellet were observed. These microstructure changes might contribute to the swelling of fuel pellets during the pulse irradiation. This could cause the large radial deformation of fuel rod and high fission gas release when the pulse irradiation conducted at relatively high peak fuel enthalpy. In addition, fine grain structures around the plutonium spot and cauliflower structure in cavity of the plutonium spot were observed in the outer region of the fuel pellet. (author)

  8. Analytical criteria for fuel failure modes observed in reactivity initiated accidents

    International Nuclear Information System (INIS)

    Luxat, J.C.

    2005-01-01

    The behaviour of nuclear fuel subjected to a short duration power pulse is of relevance to LWR and CANDU reactor safety. A Reactivity Initiated Accident (RIA) in an LWR would subject fuel to a short duration power pulse of large amplitude, whereas in CANDU a large break Loss of Coolant Accident (LOCA) would subject fuel to a longer duration, lower amplitude power excursion. The energy generated in the fuel during the power pulse is a key parameter governing the fuel response. This paper reviews the various power pulse tests that have been conducted in research reactors over the past three decades and summarizes the fuel failure modes that that have been observed in these tests. A simple analytical model is developed to characterize fuel behaviour under power pulse conditions and the model is applied to assess the experimental data from the power pulse tests. It is shown that the simple model provides a good basis for establishing criteria that demarcate the observed fuel failure modes for the various fuel designs that have been used in these tests. (author)

  9. Behaviour of rock-like oxide fuels under reactivity-initiated accident conditions

    International Nuclear Information System (INIS)

    Kazuyuki, Kusagaya; Takehiko, Nakamura; Makio, Yoshinaga; Hiroshi, Akie; Toshiyuki, Yamashita; Hiroshi, Uetsuka

    2002-01-01

    Pulse irradiation tests of three types of un-irradiated rock-like oxide (ROX) fuel - yttria-stabilised zirconia (YSZ) single phase, YSZ and spinel (MgAl 2 O 4 ) homogeneous mixture and particle-dispersed YSZ/spinel - were conducted in the Nuclear Safety Research Reactor to investigate the fuel behaviour under reactivity-initiated accident conditions. The ROX fuels failed at fuel volumetric enthalpies above 10 GJ/m 3 , which was comparable to that of un-irradiated UO 2 fuel. The failure mode of the ROX fuels, however, was quite different from that of the UO 2 fuel. The ROX fuels failed with fuel pellet melting and a part of the molten fuel was released out to the surrounding coolant water. In spite of the release, no significant mechanical energy generation due to fuel/coolant thermal interaction was observed in the tested enthalpy range below∼12 GJ/m 3 . The YSZ type and homogenous YSZ/spinel type ROX fuels failed by cladding burst when their temperatures peaked, while the particle-dispersed YSZ/spinel type ROX fuel seemed to have failed by cladding local melting. (author)

  10. Status on development and verification of reactivity initiated accident analysis code for PWR (NODAL3)

    International Nuclear Information System (INIS)

    Peng Hong Liem; Surian Pinem; Tagor Malem Sembiring; Tran Hoai Nam

    2015-01-01

    A coupled neutronics thermal-hydraulics code NODAL3 has been developed based on the nodal few-group neutron diffusion theory in 3-dimensional Cartesian geometry for a typical pressurized water reactor (PWR) static and transient analyses, especially for reactivity initiated accidents (RIA). The spatial variables are treated by using a polynomial nodal method (PNM) while for the neutron dynamic solver the adiabatic and improved quasi-static methods are adopted. A simple single channel thermal-hydraulics module and its steam table is implemented into the code. Verification works on static and transient benchmarks are being conducting to assess the accuracy of the code. For the static benchmark verification, the IAEA-2D, IAEA-3D, BIBLIS and KOEBERG light water reactor (LWR) benchmark problems were selected, while for the transient benchmark verification, the OECD NEACRP 3-D LWR Core Transient Benchmark and NEA-NSC 3-D/1-D PWR Core Transient Benchmark (Uncontrolled Withdrawal of Control Rods at Zero Power). Excellent agreement of the NODAL3 results with the reference solutions and other validated nodal codes was confirmed. (author)

  11. Reactivity initiated accident test series Test RIA 1-4 fuel behavior report

    International Nuclear Information System (INIS)

    Cook, B.A.; Martinson, Z.R.

    1984-09-01

    This report presents and discusses results from the final test in the Reactivity Initiated Accident (RIA) Test Series, Test RIA 1-4, conducted in the Power Burst Facility (PBF) at the Idaho National Engineering Laboratory. Nine preirradiated fuel rods in a 3 x 3 bundle configuration were subjected to a power burst while at boiling water reactor hot-startup system conditions. The test resulted in estimated axial peak, radial average fuel enthalpies of 234 cal/g UO 2 on the center rod, 255 cal/g UO 2 on the side rods, and 277 cal/g UO 2 on the corner rods. Test RIA 1-4 was conducted to investigate fuel coolability and channel blockage within a bundle of preirradiated rods near the present enthalpy limit of 280 cal/g UO 2 established by the US Nuclear Regulatory Commission. The test design and conduct are described, and the bundle and individual rod thermal and mechanical responses are evaluated. Conclusions from this final test and the entire PBF RIA Test Series are presented

  12. A study on gap heat transfer of LWR fuel rods under reactivity initiated accident conditions

    International Nuclear Information System (INIS)

    Fujishiro, Toshio

    1984-03-01

    Gap heat transfer between fuel pellet and cladding have a large influence on the LWR fuel behaviors under reactivity initiated accident (RIA) conditions. The objective of the present study is to investigate the effects of gap heat transfer on RIA fuel behaviors based on the results of the gap-gas parameter tests in NSRR and on their analysis with NSR-77 code. Through this study, transient variations of gap heat transfer, the effects of the gap heat transfer on fuel thermal behaviors and on fuel failure, effects of pellet-cladding sticking by eutectic formation, and the effects of cladding collapse under high external pressure have been clearified. The studies have also been performed on the applicability and its limit of modified Ross and Stoute equation which is extensively utilized to evaluate the gap heat transfer coefficient in the present fuel behavior codes. The method to evaluate the gap conductance to the conditions beyond the applicability limit of the Ross and Stoute equation has also been proposed. (author)

  13. Aspects of using a best-estimate approach for VVER safety analysis in reactivity initiated accidents

    Energy Technology Data Exchange (ETDEWEB)

    Ovdiienko, Iurii; Bilodid, Yevgen; Ieremenko, Maksym [State Scientific and Technical Centre on Nuclear and Radiation, Safety (SSTC N and RS), Kyiv (Ukraine); Loetsch, Thomas [TUEV SUED Industrie Service GmbH, Energie und Systeme, Muenchen (Germany)

    2016-09-15

    At present time, Ukraine faces the problem of small margins of acceptance criteria in connection with the implementation of a conservative approach for safety evaluations. The problem is particularly topical conducting feasibility analysis of power up-rating for Ukrainian nuclear power plants. Such situation requires the implementation of a best-estimate approach on the basis of an uncertainty analysis. For some kind of accidents, such as loss-of-coolant accident (LOCA), the best estimate approach is, more or less, developed and established. However, for reactivity initiated accident (RIA) analysis an application of best estimate method could be problematical. A regulatory document in Ukraine defines a nomenclature of neutronics calculations and so called ''generic safety parameters'' which should be used as boundary conditions for all VVER-1000 (V-320) reactors in RIA analysis. In this paper the ideas of uncertainty evaluations of generic safety parameters in RIA analysis in connection with the use of the 3D neutron kinetic code DYN3D and the GRS SUSA approach are presented.

  14. Prediction of failure of highly irradiated Zircaloy clad tubes under reactivity initiated accidents

    International Nuclear Information System (INIS)

    Jernkvist, L.O.

    2003-01-01

    This paper deals with failure of irradiated Zircaloy tubes under the heat-up stage of a reactivity initiated accident (RIA). More precisely, by use of a model for plastic strain localization and necking failure, we theoretically analyse the effects of local surface defects on clad ductility and survivability under RIA. The results show that even very shallow surface defects, e.g. arising from a non-uniform or partially spilled oxide layer, have a strong limiting effect on clad ductility. Moreover, in presence of surface defects, the ability of the clad tube to expand radially without necking failure is found to be extremely sensitive to the stress biaxiality ratio σ zz /σ θθ , which is here assumed to be in the range from 0 to 1. The results of our analysis are compared with clad ductility data available in literature, and their consequences for clad failure prediction under RIA are discussed. In particular, the results raise serious concerns regarding the applicability of failure criteria, which are based on clad strain energy density. These criteria do not capture the observed sensitivity to stress biaxiality on clad failure propensity. (author)

  15. A consistent approach to assess safety criteria for reactivity initiated accidents

    International Nuclear Information System (INIS)

    Sartoris, C.; Taisne, A.; Petit, M.; Barre, F.; Marchand, O.

    2010-01-01

    In the context of more and more demanding reactor managements, the fuel assembly discharge burn-up increases and raises the question of the current safety criteria relevance. In order to assess new safety criteria for reactivity initiated accidents, the IRSN is developing a consistent and original approach to assess safety. This approach is based on: -A thorough understanding of the physical mechanisms involved in each phase (PCMI and post-boiling phases) of the RIA, supported by the interpretation of the experimental database. This experimental data is constituted of global test outcomes, such as CABRI or Nuclear Safety Research Reactor (NSRR) experiments, and analytical program outcomes, such as PATRICIA tests, intending to understand some particular physical phenomena; -The development of computing codes, modelling the physical phenomena. The physical phenomena observed during the tests mentioned above were modelled in the SCANAIR code. SCANAIR is a thermal-mechanical code calculating fuel and clad temperatures and strains during RIA. The CLARIS module is used as a post-calculation tool to evaluate the clad failure risk based on critical flaw depth. These computing codes were validated by global and analytical tests results; -The development of a methodology. The first step of this methodology is the identification of all the parameters affecting the hydride rim depth. Besides, an envelope curve resulting from burst tests giving the hydride rim depth versus oxidation thickness is defined. After that, the critical flaw depth for a given energy pulse is calculated then compared to the hydride rim depth. This methodology results in an energy or enthalpy limit versus burn-up. This approach is planned to be followed for each phase of the RIA. An example of application is presented to evaluate a PCMI limit for a zircaloy-4 cladding UO 2 rod at Hot Zero Power.

  16. Behavior of small-sized BWR fuel under reactivity initiated accident conditions

    International Nuclear Information System (INIS)

    Yanagisawa, Kazuaki; Fujishiro, Toshio; Horiki, Oichiro; Chen Dianshan; Takeuchi, Kiyoshi.

    1992-01-01

    The present work was performed on this small-sized BWR fuel, where Zr liner and rod prepressurization were taken as experimental parameters. Experiment was done under simulated reactivity initiated accident (RIA) conditions at Nuclear Safety Research Reactor (NSRR) belonged to Japan Atomic Energy Research Institute (JAERI). Major remarks obtained are as follows: (1) Three different types of the fuel rods consisted of (a) Zr lined/pressurized (0.65MPa), (b) Zr lined/non-pressurized and (c) non-Zr lined/pressurized (o.65MPa) were used, respectively. Failure thresholds of these were not less than that (260 cal/g·fuel) described in Japanese RIA Licensing Guideline. Small-sized BWR and conventional 8 x 8 BWR fuels were considered to be in almost the same level in failure threshold. Failure modes of the three were (a) cladding melt/brittle, (b) cladding melt/brittle and (c) rupture by large ballooning, respectively. (2) The magnitude of pressure pulse at fuel fragmentation was also studied by lined/pressurized and non-lined/pressurized fuels. Above the energy deposition of 370 cal/g·fuel, mechanical energy (or pressure) was found to be released from these fragmented fuels. No measurable difference was, however, observed between the tested fuels and NSRR standard (and conventional 8 x 8 BWR) fuels. (3) It is worthy of mentioning that Zr liner tended to prevent the cladding from large ballooning. Non-lined/pressurized fuel tended to cause wrinkle deformation at cladding. Hence, cladding external was notched much by the wrinkles. (4) Time to fuel failure measured from the tested BWR fuels (pressurization < 0.6MPA) was longer than that measured from PWR fuels (pressurization < 3.2MPa). The magnitude of the former was of the order of 3 ∼ 6s, while that of the latter was < 1s. (J.P.N.)

  17. High burnup (41 - 61 GWd/tU) BWR fuel behavior under reactivity initiated accident conditions

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, Takehiko; Kusagaya, Kazuyuki; Yoshinaga, Makio; Uetsuka, Hiroshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2001-12-01

    High burnup boiling water reactor (BWR) fuel was pulse irradiated in the Nuclear Safety Research Reactor (NSRR) to investigate fuel behavior under cold startup reactivity initiated accident (RIA) conditions. Temperature, deformation, failure, and fission gas release behavior under the simulated RIA condition was studied in the tests. Fuel failure due to pellet-cladding mechanical interaction (PCMI) did not occur in the tests with typical domestic BWR fuel at burnups up to 56 GWd/tU, because they had limited cladding embrittlement due to hydrogen absorption of about 100 ppm or less. However, the cladding failure occurred in tests with fuel at a burnup of 61 GWd/tU, in which the peak hydrogen content in the cladding was above 150 ppm. This type of failure was observed for the first time in BWR fuels. The cladding failure occurred at fuel enthalpies of 260 to 360 J/g (62 to 86 cal/g), which were higher than the PCMI failure thresholds decided by the Japanese Nuclear Safety Commission. From post-test examinations of the failed fuel, it was found that the crack in the BWR cladding progressed in a manner different from the one in PWR cladding failed in earlier tests, owing to its more randomly oriented hydride distribution. Because of these differences, the BWR fuel was judged to have failed at hydrogen contents lower than those of the PWR fuel. Comparison of the test results with code calculations revealed that the PCMI failure was caused by thermal expansion of pellets, rather than by the fission gas expansion in the pellets. The gas expansion, however, was found to cause large cladding hoop deformation later after the cladding temperature escalated. (author)

  18. Assessing Hypothetical Gravity Control Propulsion

    OpenAIRE

    Millis, Marc G.

    2006-01-01

    Gauging the benefits of hypothetical gravity control propulsion is difficult, but addressable. The major challenge is that such breakthroughs are still only notional concepts rather than being specific methods from which performance can be rigorously quantified. A recent assessment by Tajmar and Bertolami used the rocket equation to correct naive misconceptions, but a more fundamental analysis requires the use of energy as the basis for comparison. The energy of a rocket is compared to an ide...

  19. Positional differences in reactive hyperemia provide insight into initial phase of exercise hyperemia

    OpenAIRE

    Jasperse, Jeffrey L.; Shoemaker, J. Kevin; Gray, Eric J.; Clifford, Philip S.

    2015-01-01

    Studies have reported a greater blood flow response to muscle contractions when the limb is below the heart compared with above the heart, and these results have been interpreted as evidence for a skeletal muscle pump contribution to exercise hyperemia. If limb position affects the blood flow response to other vascular challenges such as reactive hyperemia, this interpretation may not be correct. We hypothesized that the magnitude of reactive hyperemia would be greater with the limb below the...

  20. Surface reactivity of Ge[111] for organic functionalization by means of a radical-initiated reaction: A DFT study

    Energy Technology Data Exchange (ETDEWEB)

    Rubio-Pereda, Pamela, E-mail: rubio.pereda@gmail.com [Centro de Investigación Científica y de Educación Superior de Ensenada 3918, Código Postal 22860, Ensenada, Baja California (Mexico); Takeuchi, Noboru, E-mail: takeuchi@cnyn.unam.mx [Centro de Nanociencias y Nanotecnología, Universidad Nacional Autónoma de México, Apartado Postal 14, Código Postal 22800, Ensenada, Baja California (Mexico)

    2016-08-30

    Highlights: • The surface reactivity of the Ge [111] surface is studied with DFT for the attachment of organic molecules by means of a radical-initiated reaction. • A hydrogen vacancy in the hydrogen terminated Ge [111] surface exhibits an accumulation of charge and electron pairing. • These characteristics make the hydrogen vacancy less reactive for the attachment of unsaturated organic molecules. • The adsorption of acetylene is probable to occur while the adsorption of ethylene and styrene is substantially less probable to occur. • The hydrogen terminated Ge [111] surface is found to be less reactive than its two-dimensional analogue, the hydrogen-terminated germanene. - Abstract: The study of interfacial chemistry at semiconductor surfaces has become an important area of research. Functionalities such as molecular recognition, biocompatibility of surfaces, and molecular computing, could be achieved by the combinations of organic chemistry with the semiconductor technology. One way to accomplish this goal is by means of organic functionalization of semiconductor surfaces such as the bulk-terminated germanium surfaces, more specifically the Ge[111]. In this work, we theoretically study, by applying density functional theory, the surface reactivity of the bulk-terminated Ge[111] surface for organic functionalization by means of a radical-initiated reaction of unsaturated molecules such as acetylene, ethylene and styrene with a hydrogen vacancy on a previously hydrogen-terminated Ge[111] surface. Results derived from this work are compared with those obtained in our previous calculations on the germanene surface, following the same chemical route. Our calculations show an accumulation of electronic charge at the H-vacancy having as a result electron pairing due to strong lattice-electron coupling and therefore a diminished surface reactivity. Calculation of the transition states for acetylene and ethylene indicates that the surface reactivity of the

  1. CARNSORE: Hypothetical reactor accident study

    International Nuclear Information System (INIS)

    Walmod-Larsen, O.; Jensen, N.O.; Kristensen, L.; Meide, A.; Nedergaard, K.L.; Nielsen, F.; Lundtang Petersen, E.; Petersen, T.; Thykier-Nielsen, S.

    1984-06-01

    Two types of design-basis accident and a series of hypothetical core-melt accidents to a 600 MWe reactor are described and their consequences assessed. The PLUCON 2 model was used to calculate the consequences which are presented in terms of individual and collective doses, as well as early and late health consequences. The site proposed for the nucelar power station is Carnsore Point, County Wexford, south-east Ireland. The release fractions for the accidents described are those given in WASH-1400. The analyses are based on the resident population as given in the 1979 census and on 20 years of data from the meteorological stations at Rosslare Harbour, 8.5 km north of the site. The consequences of one of the hypothetical core-melt accidents are described in detail in a meteorological parametric study. Likewise the consequences of the worst conceivable combination of situations are described. Finally, the release fraction in one accident is varied and the consequences of a proposed, more probable ''Class 9 accident'' are presented. (author)

  2. Assessment of Core Failure Limits for Light Water Reactor Fuel under Reactivity Initiated Accidents

    International Nuclear Information System (INIS)

    Jernkvist, Lars Olof; Massih, Ali R.

    2004-12-01

    Core failure limits for high-burnup light water reactor UO 2 fuel rods, subjected to postulated reactivity initiated accidents (RIAs), are here assessed by use of best-estimate computational methods. The considered RIAs are the hot zero power rod ejection accident (HZP REA) in pressurized water reactors and the cold zero power control rod drop accident (CZP CRDA) in boiling water reactors. Burnup dependent core failure limits for these events are established by calculating the fuel radial average enthalpy connected with incipient fuel pellet melting for fuel burnups in the range of 30 to 70 MWd/kgU. The postulated HZP REA and CZP CRDA result in lower enthalpies for pellet melting than RIAs that take place at rated power. Consequently, the enthalpy thresholds presented here are lower bounds to RIAs at rated power. The calculations are performed with best-estimate models, which are applied in the FRAPCON-3.2 and SCANAIR-3.2 computer codes. Based on the results of three-dimensional core kinetics analyses, the considered power transients are simulated by a Gaussian pulse shape, with a fixed width of either 25 ms (REA) or 45 ms (CRDA). Notwithstanding the differences in postulated accident scenarios between the REA and the CRDA, the calculated core failure limits for these two events are similar. The calculated enthalpy thresholds for fuel pellet melting decrease gradually with fuel burnup, from approximately 960 J/gUO 2 at 30 MWd/kgU to 810 J/gUO 2 at 70 MWd/kgU. The decline is due to depression of the UO 2 melting temperature with increasing burnup, in combination with burnup related changes to the radial power distribution within the fuel pellets. The presented fuel enthalpy thresholds for incipient UO 2 melting provide best-estimate core failure limits for low- and intermediate-burnup fuel. However, pulse reactor tests on high-burnup fuel rods indicate that the accumulation of gaseous fission products within the pellets may lead to fuel dispersal into the coolant at

  3. Distinguishing hypothetical willingness from behavioral intentions to initiate HIV pre-exposure prophylaxis (PrEP): Findings from a large cohort of gay and bisexual men in the U.S.

    Science.gov (United States)

    Rendina, H Jonathon; Whitfield, Thomas H F; Grov, Christian; Starks, Tyrel J; Parsons, Jeffrey T

    2017-01-01

    Much of the data on the acceptability of HIV Pre-Exposure Prophylaxis (PrEP) is based on willingness to take PrEP (i.e., hypothetical receptivity) rather than actual intentions (i.e., planned behavioral action) to do so. We sought to examine differences between hypothetical willingness and behavioral intentions to begin PrEP in a national sample of gay and bisexual men (GBM) across the U.S. We utilized data collected in 2015 to examine differences between those Unwilling (42.6% n = 375), Willing but not intending (41.4%, n = 365), and willing and Intending to take PrEP (15.9%, n = 140) in a multivariable, multinomial logistic regression. Men with less education had higher odds of Intending to take PrEP. Compared to men unsure about PrEP's efficacy, those who believed PrEP was at least 90% efficacious had higher odds of Intending to take PrEP. Those who saw themselves as appropriate candidates for PrEP had higher odds of Intending to take PrEP while those who saw themselves as inappropriate candidates for PrEP had lower odds of Intending to take PrEP in comparison to men unsure if they were appropriate candidates. Increased motivation for condom non-use because of perceived sexual pressure by partners was associated with higher odds of Intending to take PrEP. The groups did not differ by risk behavior nor recent STI diagnosis. Overall, the distinction between willingness and intentions to take PrEP was meaningful and may help explain disparities between PrEP acceptability and uptake. While much of the literature has focused on hypothetical willingness to take PrEP, these results highlight the importance of simultaneously assessing willingness and intentions when examining correspondence with uptake and developing interventions to increase PrEP uptake. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. Restricted Predicates for Hypothetical Datalog

    Directory of Open Access Journals (Sweden)

    Fernando Sáenz-Pérez

    2015-12-01

    Full Text Available Hypothetical Datalog is based on an intuitionistic semantics rather than on a classical logic semantics, and embedded implications are allowed in rule bodies. While the usual implication (i.e., the neck of a Horn clause stands for inferring facts, an embedded implication plays the role of assuming its premise for deriving its consequence. A former work introduced both a formal framework and a goal-oriented tabled implementation, allowing negation in rule bodies. While in that work positive assumptions for both facts and rules can occur in the premise, negative assumptions are not allowed. In this work, we cover this subject by introducing a new concept: a restricted predicate, which allows negative assumptions by pruning the usual semantics of a predicate. This new setting has been implemented in the deductive system DES.

  5. Reactivity of vinyl ethers and vinyl ribosides in UV-initiated free radical copolymerization with acceptor monomers.

    Science.gov (United States)

    Pichavant, Loic; Guillermain, Céline; Coqueret, Xavier

    2010-09-13

    The reactivity of various vinyl ethers and vinyloxy derivatives of ribose in the presence of diethyl fumarate or diethyl maleate was investigated for evaluating the potential of donor-acceptor-type copolymerization applied to unsaturated monomers derived from renewable feedstock. The photochemically induced polymerization of model monomer blends in the bulk state was monitored by infrared spectroscopy. The method allowed us to examine the influence of monomer pair structure on the kinetic profiles. The simultaneous consumption of both monomers was observed, supporting an alternating copolymerization mechanism. A lower reactivity of the blends containing maleates compared with fumarates was confirmed. The obtained kinetic data revealed a general correlation between the initial polymerization rate and the Hansen parameter δ(H) associated with the H-bonding aptitude of the donor monomer.

  6. Positional differences in reactive hyperemia provide insight into initial phase of exercise hyperemia.

    Science.gov (United States)

    Jasperse, Jeffrey L; Shoemaker, J Kevin; Gray, Eric J; Clifford, Philip S

    2015-09-01

    Studies have reported a greater blood flow response to muscle contractions when the limb is below the heart compared with above the heart, and these results have been interpreted as evidence for a skeletal muscle pump contribution to exercise hyperemia. If limb position affects the blood flow response to other vascular challenges such as reactive hyperemia, this interpretation may not be correct. We hypothesized that the magnitude of reactive hyperemia would be greater with the limb below the heart. Brachial artery blood flow (Doppler ultrasound) and blood pressure (finger-cuff plethysmography) were measured in 10 healthy volunteers. Subjects lay supine with one arm supported in two different positions: above or below the heart. Reactive hyperemia was produced by occlusion of arterial inflow for varying durations: 0.5 min, 1 min, 2 min, or 5 min in randomized order. Peak increases in blood flow were 77 ± 11, 178 ± 24, 291 ± 25, and 398 ± 33 ml/min above the heart and 96 ± 19, 279 ± 62, 550 ± 60, and 711 ± 69 ml/min below the heart (P different responses depending on limb position. To determine whether these differences were due to mechanisms intrinsic to the arterial wall, a second set of experiments was performed in which acute intraluminal pressure reduction for 0.5 min, 1 min, 2 min, or 5 min was performed in isolated rat soleus feed arteries (n = 12). The magnitude of dilation upon pressure restoration was greater when acute pressure reduction occurred from 85 mmHg (mimicking pressure in the arm below the heart; 28.3 ± 7.9, 37.5 ± 5.9, 55.1 ± 9.9, and 68.9 ± 8.6% dilation) than from 48 mmHg (mimicking pressure in the arm above the heart; 20.8 ± 4.8, 22.6 ± 4.4, 31.2 ± 5.8, and 49.2 ± 7.1% dilation). These data support the hypothesis that arm position differences in reactive hyperemia are at least partially mediated by mechanisms intrinsic to the arterial wall. Overall, these results suggest the need to reevaluate studies employing positional

  7. Radiation initiated grafting of hydrophilic and reactive monomers on polyetherurethane for biomedical application

    International Nuclear Information System (INIS)

    Jansen, B.; Ellinghorst, G.

    1981-01-01

    Hydrogels such poly(hydroxyethylmethacrylate), poly (acrylamide) and poly(2,3-dihydroxypropylmethacrylate) are a class of well-known materials with good to excellent biomedical properties. Unfortunately the mechanical behaviour of the water-swollen gels is poor, and thus their application in pure state is limited. Much work has been done, especially by the grafting technique, on supporting the hydrogels by several techniques in order to improve their mechanical properties. In this work grafting of hydrogel forming or reactive monomers (which can be made hydrophilic by a following chemical process) onto a polyetherurethane was performed by a technique in which the trunk polymer is swollen in the graft monomer before irradiation. (author)

  8. Reactive flow modeling of initial density effect on divergence JB-9014 detonation driving

    Science.gov (United States)

    Yu, Xin; Huang, Kuibang; Zheng, Miao

    2016-06-01

    A serious of experiments were designed and the results were represented in this paper, in which 2mm thickness cooper shells were impacted by explosives named JB-9014 with different densities, and the surface velocities of the OFHC shells were measured. The comparison of experimental data shows the free surface velocity of the OFHC shell increase with the IHE density. Numerical modeling, which occupied phenomenological reactive flow rate model using the two-dimensional Lagrange hydrodynamic code, were carried out to simulate the above experiments, and empirical adjustments on detonation velocity and pressure and Pier Tang's adjustments on EOS of detonation products were both introduced in our numerical simulation work. The computational results agree well with that of experiments, and the numerical results with original parameters of products and the adjusted ones of JB-9014 could describe the density effect distinctly.

  9. The role of grain boundary fission gases in high burn-up fuel under reactivity initiated accident conditions

    International Nuclear Information System (INIS)

    Lemoine, F.; Papin, J.; Frizonnet, J.M.; Cazalis, B.; Rigat, H.

    2002-01-01

    In the frame of reactivity-initiated accidents (RIA) studies, the CABRI REP-Na programme is currently performed, focused on high burn-up UO 2 and MOX fuel behaviour. From 1993 to 1998, seven tests were performed with UO 2 fuel and three with MOX fuel. In all these tests, particular attention has been devoted to the role of fission gases in transient fuel behaviour and in clad loading mechanisms. From the analysis of experimental results, some basic phenomena were identified and a better understanding of the transient fission gas behaviour was obtained in relation to the fuel and clad thermo-mechanical evolution in RIA, but also to the initial state of the fuel before the transient. A high burn-up effect linked to the increasing part of grain boundary gases is clearly evidenced in the final gas release, which would also significantly contribute to the clad loading mechanisms. (authors)

  10. Total Monte-Carlo method applied to the assessment of uncertainties in a reactivity-initiated accident

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, D.F. da; Rochman, D.; Koning, A.J. [Nuclear Research and Consultancy Group NRG, Petten (Netherlands)

    2014-07-01

    The Total Monte-Carlo (TMC) method has been applied extensively since 2008 to propagate the uncertainties in nuclear data for reactor parameters and fuel inventory, and for several types of advanced nuclear systems. The analyses have been performed considering different levels of complexity, ranging from a single fuel rod to a full 3-D reactor core at steady-state. The current work applies the TMC method for a full 3-D pressurized water reactor core model under steady-state and transient conditions, considering thermal-hydraulic feedback. As a transient scenario the study focused on a reactivity-initiated accident, namely a control rod ejection accident initiated by a mechanical failure of the control rod drive mechanism. The uncertainties on the main reactor parameters due to variations in nuclear data for the isotopes {sup 235},{sup 238}U, {sup 239}Pu and thermal scattering data for {sup 1}H in water were quantified. (author)

  11. BISON Modeling of Reactivity-Initiated Accident Experiments in a Static Environment

    Energy Technology Data Exchange (ETDEWEB)

    Folsom, Charles P.; Jensen, Colby B.; Williamson, Richard L.; Woolstenhulme, Nicolas E.; Ban, Heng; Wachs, Daniel M.

    2016-09-01

    In conjunction with the restart of the TREAT reactor and the design of test vehicles, modeling and simulation efforts are being used to model the response of Accident Tolerant Fuel (ATF) concepts under reactivity insertion accident (RIA) conditions. The purpose of this work is to model a baseline case of a 10 cm long UO2-Zircaloy fuel rodlet using BISON and RELAP5 over a range of energy depositions and with varying reactor power pulse widths. The results show the effect of varying the pulse width and energy deposition on both thermal and mechanical parameters that are important for predicting failure of the fuel rodlet. The combined BISON/RELAP5 model captures coupled thermal and mechanical effects on the fuel-to-cladding gap conductance, cladding-to-coolant heat transfer coefficient and water temperature and pressure that would not be capable in each code individually. These combined effects allow for a more accurate modeling of the thermal and mechanical response in the fuel rodlet and thermal-hydraulics of the test vehicle.

  12. Analysis of reactivity characteristics of the MONJU initial core using JENDL-3.2

    Energy Technology Data Exchange (ETDEWEB)

    Sasaki, Kenji; Suzuki, Takayuki; Suzuki, Norimichi [Power Reactor and Nuclear Fuel Development Corp., Tsuruga, Fukui (Japan). Monju Construction Office; Itagaki, Yoshihiko

    1998-03-01

    This paper describes the evaluated results of criticality, absorber rod worth and coolant worth in the MONJU initial cores based on the JENDL-3.2 library compared with those of the JENDL-2 library. We confirm that the ratios of calculated and experimental (C/E) values using the JENDL-3.2 library are slightly better than those based on the JENDL-2 library. (author)

  13. Effect of Casmo-5 cross-section data and doppler temperature definitions on LWR reactivity initiated accidents - 166

    International Nuclear Information System (INIS)

    Grandi, G.; Smith, K.; Xu, Z.; Rhodes, J.

    2010-01-01

    During LWR Reactivity Initiated Accidents (RIA), the accurate evaluation of the Doppler reactivity feedback depends on the Doppler coefficient computed by the lattice physics code (e.g. CASMO-5), and on the effective Doppler temperature computed by the transient code (e.g. SIMULATE-3K) using the non-uniform intra-pellet temperature profile. CASMO-5 has many new features compared with its predecessor. Among them, the replacement of the L-library (based primarily on ENDF/B IV data) by the latest available nuclear data (ENDF/B VII.0), and the Monte Carlo based resonance elastic scattering model to overcome deficiencies in NJOY modeling have a significant impact on the fuel temperature coefficient, and hence on LWR RIA. The Doppler temperature effect in thermal reactors is driven by the 238 U absorption. The different effective Doppler temperature definitions, available in the literature, try to capture the considerable self-shielding of the 238 U absorption that occurs in the pellet surface by defining an appropriate fuel temperature to compute cross-sections. In this work, we investigate the effect of the nuclear data generated by CASMO-5 on RIA, as well as the impact of different effective Doppler temperature definitions, including one proposed by the authors. It is concluded: 1) LWR RIA evaluated using CASMO-5 cross section data will be milder because the energy released is ∼10% smaller; 2) the prompt enthalpy rise is barely affected by the choice of the Doppler temperature definition; and 3) the peak fuel enthalpy is affected by the choice of the Doppler temperature definition, the under-prediction of the Doppler reactivity by the 'NEA' Doppler temperature results in a conservative estimate of the peak fuel enthalpy. (authors)

  14. Pellet-Cladding Mechanical Interaction Failure Threshold for Reactivity Initiated Accidents for Pressurized Water Reactors and Boiling Water Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Beyer, Carl E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Geelhood, Kenneth J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2013-06-01

    Pacific Northwest National Laboratory (PNNL) has been requested by the U.S. Nuclear Regulatory Commission to evaluate the reactivity initiated accident (RIA) tests that have recently been performed in the Nuclear Safety Research Reactor (NSRR) and CABRI (French research reactor) on uranium dioxide (UO2) and mixed uranium and plutonium dioxide (MOX) fuels, and to propose pellet-cladding mechanical interaction (PCMI) failure thresholds for RIA events. This report discusses how PNNL developed PCMI failure thresholds for RIA based on least squares (LSQ) regression fits to the RIA test data from cold-worked stress relief annealed (CWSRA) and recrystallized annealed (RXA) cladding alloys under pressurized water reactor (PWR) hot zero power (HZP) conditions and boiling water reactor (BWR) cold zero power (CZP) conditions.

  15. Study on the behavior of waterside corroded PWR fuel rods under reactivity initiated accident conditions

    International Nuclear Information System (INIS)

    Sasajima, Hideo

    1989-06-01

    One of the highlighted problems from the fuel reliability point of view is a waterside corrosion of fuel cladding which becomes more significant at extended burnup stages. To date, at highly burned fuel, waterside corrosion was recognized as important because cladding oxidation increased with increasing burn-up. In experiments, as the basic research for the study of high burn-up fuel, the test fuel rods were prepressurized to ranges from 3.47 to 3.55 MPa, oxidized artificially to both 10 and 20 μm in thickness. Regarding fabricated oxide thickness of 10 μm, it is corresponded to be transition point from cubic law to linear law as a function of burn-up. Pulse irradiation experiments by NSRR were carried out to study the behavior of waterside corroded PWR type fuels under RIA conditions. Obtained results are: (1) The failure threshold of tested fuels was 110 cal/g·fuel (0.46 KJ/g·fuel) in enthalpy. This showed that the failure threshold of tested fuels was same as that of the past NSRR experimental data. (2) The failure mechanisms of the tested fuel rods was cladding rupture induced by ballooning. No differences in failure mechanisms existed between the past NSRR prepressurized standard fuel and the tested fuels. (3) Cracks were existed without propagating into cladding matrix, so that it was judged that these were not initiation of failure. (4) Whithin this experimental condition, reduction of cladding thickness being attributed to the increase of oxidation did not failure threshold. (author)

  16. Nuclear Reactor RA Safety Report, Vol. 16, Maximum hypothetical accident

    International Nuclear Information System (INIS)

    1986-11-01

    Fault tree analysis of the maximum hypothetical accident covers the basic elements: accident initiation, phase development phases - scheme of possible accident flow. Cause of the accident initiation is the break of primary cooling pipe, heavy water system. Loss of primary coolant causes loss of pressure in the primary circuit at the coolant input in the reactor vessel. This initiates safety protection system which should automatically shutdown the reactor. Separate chapters are devoted to: after-heat removal, coolant and moderator loss; accident effects on the reactor core, effects in the reactor building, and release of radioactive wastes [sr

  17. Initial Reactivity of Linkages and Monomer Rings in Lignin Pyrolysis Revealed by ReaxFF Molecular Dynamics.

    Science.gov (United States)

    Zhang, Tingting; Li, Xiaoxia; Guo, Li

    2017-10-24

    The initial conversion pathways of linkages and their linked monomer units in lignin pyrolysis were investigated comprehensively by ReaxFF MD simulations facilitated by the unique VARxMD for reaction analysis. The simulated molecular model contains 15 920 atoms and was constructed on the basis of Adler's softwood lignin model. The simulations uncover the initial conversion ratio of various linkages and their linked aryl monomers. For linkages and their linked monomer aryl rings of α-O-4, β-O-4 and α-O-4 & β-5, the C α /C β ether bond cracking dominates the initial pathway accounting for at least up to 80% of their consumption. For the linkage of β-β & γ-O-α, both the C α -O ether bond cracking and its linked monomer aryl ring opening are equally important. Ring-opening reactions dominate the initial consumption of other 4-O-5, 5-5, β-1, β-2, and β-5 linkages and their linked monomers. The ether bond cracking of C α -O and C β -O occurs at low temperature, and the aryl ring-opening reactions take place at relatively high temperature. The important intermediates leading to the stable aryl ring opening are the phenoxy radicals, the bridged five-membered and three-membered rings and the bridged six-membered and three-membered rings. In addition, the reactivity of a linkage and its monomer aryl ring may be affected by other linkages. The ether bond cracking of α-O-4 and β-O-4 linkages can activate its neighboring linkage or monomer ring through the formed phenoxy radicals as intermediates. The important intermediates revealed in this article should be of help in deepening the understanding of the controlling mechanism for producing aromatic chemicals from lignin pyrolysis.

  18. Experimental data report for Test TS-2 reactivity initiated accident test in NSRR with pre-irradiated BWR fuel rod

    International Nuclear Information System (INIS)

    Nakamura, Takehiko; Yoshinaga, Makio; Sobajima, Makoto; Fujishiro, Toshio; Kobayashi, Shinsho; Yamahara, Takeshi; Sukegawa, Tomohide; Kikuchi, Teruo

    1993-02-01

    This report presents experimental data for Test TS-2 which was the second test in a series of Reactivity Initiated Accident (RIA) condition test using pre-irradiated BWR fuel rods, performed at the Nuclear Safety Research Reactor (NSRR) in February, 1990. Test fuel rod used in the Test TS-2 was a short sized BWR (7x7) type rod which was fabricated from a commercial rod irradiated at Tsuruga Unit 1 power reactor. The fuel had an initial enrichment of 2.79% and a burnup of 21.3Gwd/tU (bundle average). A pulse irradiation of the test fuel rod was performed under a cooling condition of stagnant water at atmospheric pressure and at ambient temperature which simulated a BWR's cold start-up RIA event. The energy deposition of the fuel rod in this test was evaluated to be 72±5cal/g·fuel (66±5cal/g·fuel in peak fuel enthalpy) and no fuel failure was observed. Descriptions on test conditions, test procedures, transient behavior of the test rod during the pulse irradiation, and, results of pre and post pulse irradiation examinations are described in this report. (author)

  19. Experimental data report for Test TS-1 Reactivity Initiated Accident Test in NSRR with pre-irradiated BWR fuel rod

    International Nuclear Information System (INIS)

    Nakamura, Takehiko; Yoshinaga, Makio; Sobajima, Makoto; Fujishiro, Toshio; Horiki, Ohichiro; Yamahara, Takeshi; Ichihashi, Yoshinori; Kikuchi, Teruo

    1992-01-01

    This report presents experimental data for Test TS-1 which was the first in a series of tests, simulating Reactivity Initiated Accident (RIA) conditions using pre-irradiated BWR fuel rods, performed in the Nuclear Safety Research Reactor (NSRR) in October, 1989. Test fuel rod used in the Test TS-1 was a short-sized BWR (7 x 7) type rod which was fabricated from a commercial rod provided from Tsuruga Unit 1 power reactor. The fuel had an initial enrichment of 2.79 % and burnup of 21.3 GWd/t (bundle average). Pulse irradiation was performed at a condition of stagnant water cooling, atmospheric pressure and ambient temperature using a newly developed double container-type capsule. Energy deposition of the rod in this test was evaluated to be about 61 cal/g·fuel (55 cal/g·fuel in peak fuel enthalpy) and no fuel failure was observed. Descriptions on test conditions, test procedures, fuel burnup measurements, transient behavior of the test rod during pulse irradiation and results of post pulse irradiation examinations are contained in this report. (author)

  20. Analyses of hypothetical nuclear criticality excursions in 10- and 20-MW freezer/sublimer vessels

    International Nuclear Information System (INIS)

    Haught, C.F.; Jordan, W.C.; Basoglu, B.; Dodds, H.L.; Wilkinson, A.D.

    1995-01-01

    A theoretical model is used to predict the consequences of a postulated hypothetical nuclear criticality excursion in a freezer/sublimer (F/S). Previous work has shown that an intrusion of water into a F/S may result in a critical configuration. A first attempt is made to model the neutronic and thermal-hydraulic phenomena occurring during a criticality excursion involving both uranium hexafluoride (UF 6 ) and uranyl fluoride (UO 2 F 2 ) solution, which is present in the F/S during upset conditions. The model employs point neutronics coupled with simple thermal hydraulics. Reactivity feedback from changes in the properties of the system are included in the model. The excursion is studied in a 10-MW F/S with an initial load of 3,500 kg of 5% weight enriched UF 6 and in a 20-MW F/S with an initial load of 6,800 kg of 2% weight enriched UF 6 . The magnitude of the fission release determined in this work is 5.93 x 10 18 fissions in the 10-MW F/S and 4.21 x 10 18 fissions in the 20-MW F/S. In order to demonstrate the reliability of the techniques used in this work, a limited validation study was conducted by comparing the fission release and peak fission rate determined by this work with experimental results for a limited number of experiments. The agreement between calculations and experiments in the validation study is considered to be satisfactory. The calculational results for the hypothetical accidents in the two F/S vessels appear reasonable

  1. Comparison of SAS3A and MELT-III predictions for a transient overpower hypothetical accident

    International Nuclear Information System (INIS)

    Wilburn, N.P.

    1976-01-01

    A comparison is made of the predictions of the two major codes SAS3A and MELT-III for the hypothetical unprotected transient overpower accident in the FFTF. The predictions of temperatures, fuel restructuring, fuel melting, reactivity feedbacks, and core power are compared

  2. Effect of potential waste constituents on the reactivity of Hanford ferrocyanide wastes: Diluent, catalyst, and initiator studies

    International Nuclear Information System (INIS)

    Scheele, R.D.; Johnston, J.W.; Tingey, J.M.; Burger, L.L.; Sell, R.L.

    1993-04-01

    During the 1980s, scientists at the Hanford Site began considering disposal options for wastes in underground storage tanks. As a result of safety concerns, it was determined that special consideration should be given to ferrocyanide-bearing wastes to ensure their continued safe storage. In addition, Westinghouse Hanford Company (WHC) chartered Pacific Northwest Laboratory (PNL) to determine the conditions necessary for vigorous reactions to occur in the Hanford Site ferrocyanide wastes. As part of those studies, PNL has evaluated the effects of selected potential waste constituents to determine how they might affect the reactivity of the wastes. The authors' investigations of the diluent, catalytic, or initiating effects of potential waste constituents included studies (1) to determine the effect of the oxidant-to-ferrocyanide ratio, (2) to establish the effect of sodium aluminate concentration, (3) to identify materials that could affect the explosivity of a mixture of sodium nickel ferricyanide (a potential aging product of ferrocyanide) and sodium nitrate and nitrite, (4) and to determine the effect of nickel sulfide concentration. They also conducted a thermal sensitivity study and analyzed the results to determine the relative behaviors of sodium nickel ferrocyanide and ferricyanide. A statistical evaluation of the time-to-explosion (TTX) test results from the catalyst and initiator screening study found that the ferricyanide reacted at a faster rate than did the ferrocyanide analog. The thermal analyses indicated that the ferricyanide form is more thermally sensitive, exhibiting exothermic behavior at a lower temperature than the ferrocyanide form. The increased thermal sensitivity of the ferricyanide, which is a potential oxidation product of ferrocyanide, relative to the ferrocyanide analog, does not support the hypothesis that aging independent of the reaction pathway will necessarily reduce the reaction hazard of ferrocyanide wastes

  3. Reactive Oxygen Species Are Required for Human Mesenchymal Stem Cells to Initiate Proliferation after the Quiescence Exit

    Directory of Open Access Journals (Sweden)

    O. G. Lyublinskaya

    2015-01-01

    Full Text Available The present study focuses on the involvement of reactive oxygen species (ROS in the process of mesenchymal stem cells “waking up” and entering the cell cycle after the quiescence. Using human endometrial mesenchymal stem cells (eMSCs, we showed that intracellular basal ROS level is positively correlated with the proliferative status of the cell cultures. Our experiments with the eMSCs synchronized in the G0 phase of the cell cycle revealed a transient increase in the ROS level upon the quiescence exit after stimulation of the cell proliferation. This increase was registered before the eMSC entry to the S-phase of the cell cycle, and elimination of this increase by antioxidants (N-acetyl-L-cysteine, Tempol, and Resveratrol blocked G1–S-phase transition. Similarly, a cell cycle arrest which resulted from the antioxidant treatment was observed in the experiments with synchronized human mesenchymal stem cells derived from the adipose tissue. Thus, we showed that physiologically relevant level of ROS is required for the initiation of human mesenchymal stem cell proliferation and that low levels of ROS due to the antioxidant treatment can block the stem cell self-renewal.

  4. Driving force of PCMI failure under reactivity initiated accident conditions and influence of hydrogen embrittlement on failure limit

    International Nuclear Information System (INIS)

    Tomiyasu, Kunihiko; Sugiyama, Tomoyuki; Nakamura, Takehiko; Fuketa, Toyoshi

    2005-09-01

    In order to clarify the driving force of PCMI (Pellet/Cladding Mechanical Interaction) failure on high burnup fuels and to investigate the influence of hydrogen embrittlement on failure limit under RIA (Reactivity Initiated Accident) conditions, RIA-simulation experiments were performed on fresh fuel rods in the NSRR (Nuclear Safety Research Reactor). The driving force of PCMI was restricted only to thermal expansion of pellet by using fresh UO 2 pellets. Fresh claddings were pre-hydrided to simulate hydrogen absorption of high burnup fuel rods. In seven experiments out of fourteen, test rods resulted in PCMI failure, which has been observed in the NSRR tests on high burnup PWR fuels, in terms of the transient behavior and the fracture configuration. This indicates that the driving force of PCMI failure is sufficiently explained with thermal expansion of pellet and a contribution of fission gas on it is small. A large number of incipient cracks were generated in the outer surface of the cladding even on non-failed fuel rods, and they stopped at the boundary between hydride rim, which was a hydride layer localized in the periphery of the cladding, and metallic layer. It suggests that the integrity of the metallic layer except for the hydride rim has particular importance for failure limit. Fuel enthalpy at failure correlates with the thickness of hydride rim, and tends to decrease with thicker hydride layer. (author)

  5. Reducing hypothetical bias in choice experiments

    DEFF Research Database (Denmark)

    Ladenburg, Jacob; Olsen, Søren Bøye; Nielsen, Rasmus Christian Fejer

    eliminate some of the hypothetical bias. The present paper tests an addition to Cheap Talk, an Opt-Out Reminder. The Opt-Out Reminder is an objective short script presented prior to the choice sets, prompting the respondent to choose the opt-out alternative, if he/she finds the proposed policy generated...... alternatives in a choice set too expensive. The results suggest that adding an Opt-Out Reminder to Cheap Talk can in fact reduce hypothetical bias even further and reduces some of the ineffectiveness of CT in relation to the survey bid range and experienced respondents....

  6. C-reactive protein implications in new-onset hypertension in a healthy population initially aged 65 years : the Proof study

    NARCIS (Netherlands)

    Dauphinot, Virginie; Roche, Frederic; Kossovsky, Michel P.; Schott, Anne-Marie; Pichot, Vincent; Gaspoz, Jean-Michel; Gosse, Philippe; Barthelemy, Jean-Claude

    Background Because inflammation is known to be related with several cardiovascular diseases, we sought to determine whether C-reactive protein (CRP) might precede the onset of hypertension. Methods The study population was selected from the Proof study cohort including 1011 individuals initially

  7. Reactions to Hypothetical, Jealousy Producing Events.

    Science.gov (United States)

    Hansen, Gary L.

    1982-01-01

    Asked subjects (N=220) how they would feel about their mates' behavior in eight hypothetical situations designed to measure jealousy. Responses indicated that jealousy is likely to be a major issue. Sex role orientation is most consistently related to jealousy with sex role traditional subjects being the most jealous. (Author)

  8. Mechanical energy release and fuel fragmentation in high energy deposition into fuel under a reactivity initiated accident condition

    International Nuclear Information System (INIS)

    Tsuruta, Takaharu; Saito, Shinzo; Ochiai, Masaaki

    1985-01-01

    The fuel fragmentation is one of important subjects to be studied, since it is one of basic processes of molten fuel-coolant interaction (MFCI) and it has not yet been made clear enough. Accordingly, UO 2 fuel fragmentation was studied in the NSRR experiments simulating a reactivity initiated accident (RIA). As results of the experiments, the distribution of the size of fuel fragments was obtained and the mechanism of fuel fragmentation was discussed as described below. It was revealed that the distribution was well displayed in the form of logarithmic Rosin-Rammler's distribution law. It was shown that the conversion ratio from thermal energy to mechanical in the experiment was in inverse propotion to the volume-surface mean diameter defined as a ratio of the total volume of fragments to the total surface. Consequently, it was confirmed that the mean diameter was proper as an index for the degree of the fuel fragmentation. It was also pointed out that the Weber-type hydraulic instability model for fragmentation was consistent with the experimental results. The mechanism of the fuel fragmentation is understood as follows. Cladding tube is ruptured due to the increase in rod pressure when fuel is molten, and then molten fuel spouts through the openings in the form of jet. As a result of molten fuel spouting, fuel is fragmented by the Weber-type of hydraulic instability. The model well explains the effects of experimental parameters as heat deposition, subcooling of cooling water and capsule diameter, on the fuel fragmentation. According to the model, fuel fragments have to be spherical. There were many spherical particles which had hollow and burst crack. This may be due to internal burst during solidification process. The items which should be studied further are also described in the end of this report. (author)

  9. A micro-chip initiator with controlled combustion reactivity realized by integrating Al/CuO nanothermite composites on a microhotplate platform

    International Nuclear Information System (INIS)

    Ahn, Ji Young; Lee, Hyung Woo; Kim, Jong Man; Kim, Soo Hyung; Kim, Sang Beom; Kim, Ji Hoon; Jang, Nam Su; Kim, Dae Hyun

    2016-01-01

    The interfacial contact area between the fuel and oxidizer components plays an important role in determining the combustion reactivity of nanothermite composites. In addition, the development of compact and reliable ignition methods can extend the applicability of nanothermite composites to various thermal engineering fields. In this study we report the development of a micro-chip initiator with controlled combustion reactivity using concepts usually applied to microelectromechanical systems (MEMS) and simple nanofabrication processes. The nanothermite composites fabricated in this study consisted of aluminum nanoparticles (Al NPs) as the fuel and copper oxide nanoparticles (CuO NPs) as the oxidizer accumulated on a silicon oxide substrate with a serpentine-shaped gold (Au) electrode. The micro-chip initiator rapidly ignited and exploded when minimal current was supplied. The effects of stacking structures of Al and CuO-based multilayers on the combustion properties were systematically investigated in terms of the pressurization rate, peak explosion time, and heat flow. Pressurization rates of 0.004–0.025 MPa μs −1 and heat flows of 2.0–3.8 kJ g −1 with a commonly fast response time of less than 20 ms could be achieved by simply changing the interfacial structures of the Al and CuO multilayers. The controllability of combustion reactivity of micro-chip initiator can be made for general nanothermite composites composed of Al and various metal oxides (e.g. Fe 2 O 3 , CuO, KMnO 4 , etc). The micro-chip initiator fabricated in this study was reliable, compact, and proved to be a versatile platform, exhibiting controlled combustion reactivity and fast response time, which could be used for various civilian and military thermal engineering applications, such as in initiators and propulsion, welding, and ordinance systems. (paper)

  10. The role of fission gas in the analysis of hypothetical core disruptive accidents

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, E A [Gesellschaft fuer Kernforschung mbH, INR Kernforschungszentrum, Karlsruhe (Germany)

    1977-07-01

    This paper summarizes recent work at Karlsruhe with the goal of understanding the effects of fission gas in hypothetical core disruptive accidents. The fission gas behavior model is discussed. The computer programs LANGZEIT and KURZZEIT describe the long-term and the transient gas behavior, respectively. Recent improvements in the modeling and a comparison of results with experimental data are reported. A somewhat detailed study of the role of fission gas in transient overpower (TOP) accidents was carried out. If pessimistic assumptions, like pin failure near the axial midplane are made, these accidents end in core disassembly. The codes HOPE and KADIS were used to analyze the initiating and the disassembly phase in these studies. Improvements of the codes are discussed. They include an automatic data transfer from HOPE to KADIS, and a new equation of state in KADIS, with an improved model for fission gas behavior. The analysis of a 15 cents/sec reactivity ramp accident is presented. Different pin failure criteria are used. In the cases selected, the codes predict an energetic disassembly. For the much discussed loss-of-flow driven TOP, detailed models are presently not available at Karlsruhe. Therefore, only a few comments and the results of a few scoping calculations will be presented.

  11. Development of neutronics and thermal hydraulics coupled code – SAC-RIT for plate type fuel and its application to reactivity initiated transient analysis

    International Nuclear Information System (INIS)

    Singh, Tej; Kumar, Jainendra; Mazumdar, Tanay; Raina, V.K.

    2013-01-01

    Highlights: • A point reactor kinetics code coupled with thermal hydraulics of plate type fuel is developed. • This code is applicable for two phase flow of coolant. • Safety analysis of IAEA benchmark reactor core is carried out. • Results agree well with the results available in literature. - Abstract: A point reactor kinetics code SAC-RIT, acronym of Safety Analysis Code for Reactivity Initiated Transient, coupled with thermal hydraulics of two phase coolant flow for plate type fuel, is developed to calculate reactivity initiated transient analysis of nuclear research and test reactors. Point kinetics equations are solved by fourth order Runge Kutta method. Reactivity feedback effect is included into the code. Solution of kinetics equations gives neutronic power and it is then fed into a thermal hydraulic code where mass, momentum and thermal energy conservation equations are solved by explicit finite difference method to find out fuel, clad and coolant temperatures during transients. In this code, all possible flow regimes including laminar flow, transient flow and turbulent flow have been covered. Various heat transfer coefficients suitable for single liquid, sub-cooled boiling, saturation boiling, film boiling and single vapor phases are incorporated in the thermal hydraulic code

  12. Simulation and verification studies of reactivity initiated accident by comparative approach of NK/TH coupling codes and RELAP5 code

    Energy Technology Data Exchange (ETDEWEB)

    Ud-Din Khan, Salah [Chinese Academy of Sciences, Hefei (China). Inst. of Plasma Physics; King Saud Univ., Riyadh (Saudi Arabia). Sustainable Energy Technologies Center; Peng, Minjun [Harbin Engineering Univ. (China). College of Nuclear Science and Technology; Yuntao, Song; Ud-Din Khan, Shahab [Chinese Academy of Sciences, Hefei (China). Inst. of Plasma Physics; Haider, Sajjad [King Saud Univ., Riyadh (Saudi Arabia). Sustainable Energy Technologies Center

    2017-02-15

    The objective is to analyze the safety of small modular nuclear reactors of 220 MWe power. Reactivity initiated accidents (RIA) were investigated by neutron kinetic/thermal hydraulic (NK/TH) coupling approach and thermal hydraulic code i.e., RELAP5. The results obtained by these approaches were compared for validation and accuracy of simulation. In the NK/TH coupling technique, three codes (HELIOS, REMARK, THEATRe) were used. These codes calculate different parameters of the reactor core (fission power, reactivity, fuel temperature and inlet/outlet temperatures). The data exchanges between the codes were assessed by running the codes simultaneously. The results obtained from both (NK/TH coupling) and RELAP5 code analyses complement each other, hence confirming the accuracy of simulation.

  13. Testing QCD with Hypothetical Tau Leptons

    Energy Technology Data Exchange (ETDEWEB)

    Brodsky, Stanley J.

    1998-10-21

    We construct new tests of perturbative QCD by considering a hypothetical {tau} lepton of arbitrary mass, which decays hadronically through the electromagnetic current. We can explicitly compute its hadronic width ratio directly as an integral over the e{sup +}e{sup -} annihilation cross section ratio, R{sub e{sup +}e{sup -}}. Furthermore, we can design a set of commensurate scale relations and perturbative QCD tests by varying the weight function away from the form associated with the V-A decay of the physical {tau}. This method allows the wide range of the R{sub e{sup +}e{sup -}} data to be used as a probe of perturbative QCD.

  14. Hot spot formation and chemical reaction initiation in shocked HMX crystals with nanovoids: a large-scale reactive molecular dynamics study.

    Science.gov (United States)

    Zhou, Tingting; Lou, Jianfeng; Zhang, Yangeng; Song, Huajie; Huang, Fenglei

    2016-07-14

    We report million-atom reactive molecular dynamic simulations of shock initiation of β-cyclotetramethylene tetranitramine (β-HMX) single crystals containing nanometer-scale spherical voids. Shock induced void collapse and subsequent hot spot formation as well as chemical reaction initiation are observed which depend on the void size and impact strength. For an impact velocity of 1 km s(-1) and a void radius of 4 nm, the void collapse process includes three stages; the dominant mechanism is the convergence of upstream molecules toward the centerline and the downstream surface of the void forming flowing molecules. Hot spot formation also undergoes three stages, and the principal mechanism is kinetic energy transforming to thermal energy due to the collision of flowing molecules on the downstream surface. The high temperature of the hot spot initiates a local chemical reaction, and the breakage of the N-NO2 bond plays the key role in the initial reaction mechanism. The impact strength and void size have noticeable effects on the shock dynamical process, resulting in a variation of the predominant mechanisms leading to void collapse and hot spot formation. Larger voids or stronger shocks result in more intense hot spots and, thus, more violent chemical reactions, promoting more reaction channels and generating more reaction products in a shorter duration. The reaction products are mainly concentrated in the developed hot spot, indicating that the chemical reactivity of the hmx crystal is greatly enhanced by void collapse. The detailed information derived from this study can aid a thorough understanding of the role of void collapse in hot spot formation and the chemical reaction initiation of explosives.

  15. Hypothetical conflict situations with friends and peers

    Directory of Open Access Journals (Sweden)

    Petrović Danijela S.

    2012-01-01

    Full Text Available This paper deals with age and sex differences in preferred strategies of conflict resolution in friendship and peer relationships. The study was conducted on the sample of 286 adolescents. Conflict resolution strategies have been investigated by the method of hypothetical conflict situations. For the purposes of this research, we have created an instrument consisting of 20 hypothetical situations, with the following subjects of conflict: breaking the agreement, non-compliance with opinion differences, provocations, dishonesty and stubbornness. Conflict resolution strategies we examined were giving in, withdrawal, competition and problem solving. The results have shown that problem solving is the dominant strategy of adolescents in conflict with friends, while in peer conflicts they more often opt for competition. Age differences are reflected in the fact that older adolescents are more likely to choose problem solving than younger, whereas younger adolescents are more likely to choose a retreat (withdrawal strategy than older. Girls are more prone to choosing problem solving than boys, who, on the other hand, tend to withdraw more than girls. Also, gender of the other person in the conflict is proved to be important - in conflict with male peers, adolescents choose competition to a greater extent and withdraw to a minor extent, compared to when they are in conflict with female peers. The results have practical implications as well. In programs for teaching constructive conflict resolution that are designed for younger adolescents there should be more emphasis on empowerment and training for assertive behaviour. In addition, when teaching about constructive conflict resolution strategies, it is important to consider the gender of adolescents as well as the gender of the person with whom they are in conflict.

  16. The initiation of lateral roots in the primary roots of maize (Zea mays L.) implies a reactivation of cell proliferation in a group of founder pericycle cells.

    Science.gov (United States)

    Alarcón, M Victoria; Lloret, Pedro G; Martín-Partido, Gervasio; Salguero, Julio

    2016-03-15

    The initiation of lateral roots (LRs) has generally been viewed as a reactivation of proliferative activity in pericycle cells that are committed to initiate primordia. However, it is also possible that pericycle founder cells that initiate LRs never cease proliferative activity but rather are displaced to the most distal root zones while undertaking successive stages of LR initiation. In this study, we tested these two alternative hypotheses by examining the incorporation of 5-bromo-2'-deoxyuridine (BrdU) into the DNA of meristematic root cells of Zea mays. According to the values for the length of the cell cycle and values for cell displacement along the maize root, our results strongly suggest that pericycle cells that initiate LR primordia ceased proliferative activity upon exiting the meristematic zone. This finding is supported by the existence of a root zone between 4 and 20mm from the root cap junction, in which neither mitotic cells nor labelled nuclei were observed in phloem pericycle cells. Copyright © 2016 Elsevier GmbH. All rights reserved.

  17. Intersubassembly incoherencies and grouping techniques in LMFBR hypothetical overpower accident

    International Nuclear Information System (INIS)

    Wilburn, N.P.

    1977-10-01

    A detailed analysis was made of the FTR core using the 100-channel MELT-IIIA code. Results were studied for the transient overpower accident (where 0.5$/sec and 1$/sec ramps) and in which the Damage Parameter and the Failure Potential criteria were used. Using the information obtained from these series of runs, a new method of grouping the subassemblies into channels has been developed. Also, it was demonstrated that a 7-channel representation of the FTR core using this method does an adequate job of representing the behavior during a hypothetical disruptive transient overpower core accident. It has been shown that this new 7-channel grouping method does a better job than an earlier 20-channel grouping. It has also been demonstrated that the incoherency effects between subassemblies as shown during the 76-channel representation of the reactor can be adequately modeled by 7-channels, provided the 7-channels are selected according to the criteria stated in the report. The overall results of power and net reactivity were shown to be only slightly different in the two cases of the 7-channel and the 76-channel runs. Therefore, it can be concluded that any intersubassembly incoherencies can be modeled adequately by a small number of channels, provided the subassemblies making up these channels are selected according to the criteria stated

  18. EAC european accident code. A modular system of computer programs to simulate LMFBR hypothetical accidents

    International Nuclear Information System (INIS)

    Wider, H.; Cametti, J.; Clusaz, A.; Devos, J.; VanGoethem, G.; Nguyen, H.; Sola, A.

    1985-01-01

    One aspect of fast reactor safety analysis consists of calculating the strongly coupled system of physical phenomena which contribute to the reactivity balance in hypothetical whole-core accidents: these phenomena are neutronics, fuel behaviour and heat transfer together with coolant thermohydraulics in single- and two-phase flow. Temperature variations in fuel, coolant and neighbouring structures induce, in fact, thermal reactivity feedbacks which are added up and put in the neutronics calculation to predict the neutron flux and the subsequent heat generation in the reactor. At this point a whole-core analysis code is necessary to examine for any hypothetical transient whether the various feedbacks result effectively in a negative balance, which is the basis condition to ensure stability and safety. The European Accident Code (EAC), developed at the Joint Research Centre of the CEC at Ispra (Italy), fulfills this objective. It is a modular informatics structure (quasi 2-D multichannel approach) aimed at collecting stand-alone computer codes of neutronics, fuel pin mechanics and hydrodynamics, developed both in national laboratories and in the JRC itself. EAC makes these modules interact with each other and produces results for these hypothetical accidents in terms of core damage and total energy release. 10 refs

  19. Reduction in C-reactive protein and LDL cholesterol and cardiovascular event rates after initiation of rosuvastatin: a prospective study of the JUPITER trial

    DEFF Research Database (Denmark)

    Ridker, Paul M; Danielson, Eleanor; Fonseca, Francisco Ah

    2009-01-01

    BACKGROUND: Statins lower high-sensitivity C-reactive protein (hsCRP) and cholesterol concentrations, and hypothesis generating analyses suggest that clinical outcomes improve in patients given statins who achieve hsCRP concentrations less than 2 mg/L in addition to LDL cholesterol less than 1.......8 mmol/L (LDL cholesterol and hsCRP after the start of statin therapy is controversial. We prospectively tested this hypothesis. METHODS: In an analysis of 15 548 initially healthy men and women participating in the JUPITER trial (87% of full cohort), we...... to on-treatment concentrations of LDL cholesterol (>/=1.8 mmol/L or /=2 mg/L or

  20. In Silico screening for functional candidates amongst hypothetical proteins

    DEFF Research Database (Denmark)

    Desler, Claus; Suravajhala, Prashanth; Sanderhoff, May

    2009-01-01

    eukaryotes. With the general belief that the majority of hypothetical proteins are the product of pseudogenes, it is essential to have a tool with the ability of pinpointing the minority of hypothetical proteins with a high probability of being expressed. RESULTS: Here, we present an in silico selection...

  1. Experimental data report for test TS-3 Reactivity Initiated Accident test in the NSRR with pre-irradiated BWR fuel rod

    International Nuclear Information System (INIS)

    Nakamura, Takehiko; Yoshinaga, Makio; Fujishiro, Toshio; Kobayashi, Shinsho; Yamahara, Takeshi; Sukegawa, Tomohide; Kikuchi, Teruo; Sobajima, Makoto.

    1993-09-01

    This report presents experimental data for Test TS-3 which was the third test in a series of Reactivity Initiated Accident (RIA) tests using pre-irradiated BWR fuel rods, performed in the Nuclear Safety Research Reactor (NSRR) in September, 1990. Test fuel rod used in the Test TS-3 was a short-sized BWR (7 x 7) type rod which was re-fabricated from a commercial rod irradiated in the Tsuruga Unit 1 power reactor of Japan Atomic Power Co. The fuel had an initial enrichment of 2.79 % and a burnup of 26 Gwd/tU. A pulse irradiation of the test fuel rod was performed under a cooling condition of stagnant water at atmospheric pressure and at ambient temperature which simulated a BWR's cold start-up RIA event. The energy deposition of the fuel rod in this test was evaluated to be 94 ± 4 cal/g · fuel (88 ± 4 cal/g · fuel in peak fuel enthalpy) and no fuel failure was observed. Descriptions on test conditions, test procedures, transient behavior of the test rod during the pulse irradiation, and results of pre-pulse and post-pulse irradiation examinations are described in this report. (author)

  2. In Silico screening for functional candidates amongst hypothetical proteins

    Directory of Open Access Journals (Sweden)

    Sanderhoff May

    2009-09-01

    Full Text Available Abstract Background The definition of a hypothetical protein is a protein that is predicted to be expressed from an open reading frame, but for which there is no experimental evidence of translation. Hypothetical proteins constitute a substantial fraction of proteomes of human as well as of other eukaryotes. With the general belief that the majority of hypothetical proteins are the product of pseudogenes, it is essential to have a tool with the ability of pinpointing the minority of hypothetical proteins with a high probability of being expressed. Results Here, we present an in silico selection strategy where eukaryotic hypothetical proteins are sorted according to two criteria that can be reliably identified in silico: the presence of subcellular targeting signals and presence of characterized protein domains. To validate the selection strategy we applied it on a database of human hypothetical proteins dating to 2006 and compared the proteins predicted to be expressed by our selecting strategy, with their status in 2008. For the comparison we focused on mitochondrial proteins, since considerable amounts of research have focused on this field in between 2006 and 2008. Therefore, many proteins, defined as hypothetical in 2006, have later been characterized as mitochondrial. Conclusion Among the total amount of human proteins hypothetical in 2006, 21% have later been experimentally characterized and 6% of those have been shown to have a role in a mitochondrial context. In contrast, among the selected hypothetical proteins from the 2006 dataset, predicted by our strategy to have a mitochondrial role, 53-62% have later been experimentally characterized, and 85% of these have actually been assigned a role in mitochondria by 2008. Therefore our in silico selection strategy can be used to select the most promising candidates for subsequent in vitro and in vivo analyses.

  3. Consequence evaluation of hypothetical reactor pressure vessel support failure

    International Nuclear Information System (INIS)

    Lu, S.C.; Holman, G.S.; Lambert, H.E.

    1991-01-01

    This paper describes a consequence evaluation to address safety concerns raised by the radiation embrittlement of the reactor pressure vessel (RPV) supports for the Trojan nuclear power plant. The study comprises a structural evaluation and an effects evaluation and assumes that all four reactor vessel supports have completely lost the load carrying capability. The structural evaluation concludes that the Trojan reactor coolant loop (RCL) piping is capable of transferring loads to the steam generator (SG) supports and the reactor coolant pump (RCP) supports and that the SG supports and the RCP supports have sufficient design margins to accommodate additional loads transferred to them through the RCL piping. The effects evaluation, employing a systems analysis approach, investigates initiating events and the reliability of the engineered safeguard systems as the RPV is subject to movements caused by the RPV support failure. The evaluation identifies a number of areas for further investigation and concludes that a hypothetical failure of the Trojan RPV supports due to radiation embrittlement will not result in consequences of significant safety concerns. (author)

  4. Transition phase in LMFBR hypothetical accidents

    International Nuclear Information System (INIS)

    Ostensen, R.W.; Henninger, R.J.; Jackson, J.F.

    1976-01-01

    Mechanistic analyses of transient-under-cooling accidents have led in some cases to a mild initiating phase instead of a direct hydrodynamic disassembly of the core. The fuel is then trapped in the core by the strong mechanical surroundings and blockages formed by refrozen cladding steel and/or fuel. The formation of fuel blockages has been verified experimentally. The bottled-up core will boil on fission and decay heat, with steel as the working fluid. Boil-up in a churn turbulent flow regime may prevent recriticality due to fuel recompaction. Ultimate fuel removal from the core is probably by a two-phase blow-down after permanent leakage paths are opened. However, a vigorous recriticality can not be precluded. Reactors with void coefficients larger than that in CRBR are more likely to disassemble in the initiating phase, so the transition phase may be unique to small cores

  5. Simulation of reactivity-initiated accident transients on UO2-M5® fuel rods with ALCYONE V1.4 fuel performance code

    Directory of Open Access Journals (Sweden)

    Isabelle Guénot-Delahaie

    2018-03-01

    Full Text Available The ALCYONE multidimensional fuel performance code codeveloped by the CEA, EDF, and AREVA NP within the PLEIADES software environment models the behavior of fuel rods during irradiation in commercial pressurized water reactors (PWRs, power ramps in experimental reactors, or accidental conditions such as loss of coolant accidents or reactivity-initiated accidents (RIAs. As regards the latter case of transient in particular, ALCYONE is intended to predictively simulate the response of a fuel rod by taking account of mechanisms in a way that models the physics as closely as possible, encompassing all possible stages of the transient as well as various fuel/cladding material types and irradiation conditions of interest. On the way to complying with these objectives, ALCYONE development and validation shall include tests on PWR-UO2 fuel rods with advanced claddings such as M5® under “low pressure–low temperature” or “high pressure–high temperature” water coolant conditions.This article first presents ALCYONE V1.4 RIA-related features and modeling. It especially focuses on recent developments dedicated on the one hand to nonsteady water heat and mass transport and on the other hand to the modeling of grain boundary cracking-induced fission gas release and swelling. This article then compares some simulations of RIA transients performed on UO2-M5® fuel rods in flowing sodium or stagnant water coolant conditions to the relevant experimental results gained from tests performed in either the French CABRI or the Japanese NSRR nuclear transient reactor facilities. It shows in particular to what extent ALCYONE—starting from base irradiation conditions it itself computes—is currently able to handle both the first stage of the transient, namely the pellet-cladding mechanical interaction phase, and the second stage of the transient, should a boiling crisis occur.Areas of improvement are finally discussed with a view to simulating and

  6. Neutronics simulations on hypothetical power excursion and possible core melt scenarios in CANDU6

    International Nuclear Information System (INIS)

    Kim, Yonghee

    2015-01-01

    LOCA (Loss of coolant accident) is an outstanding safety issue in the CANDU reactor system since the coolant void reactivity is strongly positive. To deal with the LOCA, the CANDU systems are equipped with specially designed quickly-acting secondary shutdown system. Nevertheless, the so-called design-extended conditions are requested to be taken into account in the safety analysis for nuclear reactor systems after the Fukushima accident. As a DEC scenario, the worst accident situation in a CANDU reactor system is a unprotected LOCA, which is supposed to lead to a power excursion and possibly a core melt-down. In this work, the hypothetical unprotected LOCA scenario is simulated in view of the power excursion and fuel temperature changes by using a simplified point-kinetics (PK) model accounting for the fuel temperature change. In the PK model, the core reactivity is assumed to be affected by a large break LOCA and the fuel temperature is simulated to account for the Doppler effect. In addition, unlike the conventional PK simulation, we have also considered the Xe-I model to evaluate the impact of Xe during the LOCA. Also, we tried to simulate the fuel and core melt-down scenario in terms of the reactivity through a series of neutronics calculations for hypothetical core conditions. In case of a power excursion and possible fuel melt-down situation, the reactor system behavior is very uncertain. In this work, we tried to understand the impacts of fuel melt and relocation within the pressure vessel on the core reactivity and failure of pressure and calandria tubes. (author)

  7. Advanced computational methods for the assessment of reactor core behaviour during reactivity initiated accidents. Final report; Fortschrittliche Rechenmethoden zum Kernverhalten bei Reaktivitaetsstoerfaellen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Pautz, A.; Perin, Y.; Pasichnyk, I.; Velkov, K.; Zwermann, W.; Seubert, A.; Klein, M.; Gallner, L.; Krzycacz-Hausmann, B.

    2012-05-15

    The document at hand serves as the final report for the reactor safety research project RS1183 ''Advanced Computational Methods for the Assessment of Reactor Core Behavior During Reactivity-Initiated Accidents''. The work performed in the framework of this project was dedicated to the development, validation and application of advanced computational methods for the simulation of transients and accidents of nuclear installations. These simulation tools describe in particular the behavior of the reactor core (with respect to neutronics, thermal-hydraulics and thermal mechanics) at a very high level of detail. The overall goal of this project was the deployment of a modern nuclear computational chain which provides, besides advanced 3D tools for coupled neutronics/ thermal-hydraulics full core calculations, also appropriate tools for the generation of multi-group cross sections and Monte Carlo models for the verification of the individual calculational steps. This computational chain shall primarily be deployed for light water reactors (LWR), but should beyond that also be applicable for innovative reactor concepts. Thus, validation on computational benchmarks and critical experiments was of paramount importance. Finally, appropriate methods for uncertainty and sensitivity analysis were to be integrated into the computational framework, in order to assess and quantify the uncertainties due to insufficient knowledge of data, as well as due to methodological aspects.

  8. C-reactive protein in patients with advanced metastatic renal cell carcinoma: Usefulness in identifying patients most likely to benefit from initial nephrectomy

    International Nuclear Information System (INIS)

    Ito, Hiroki; Kishida, Takeshi; Miura, Takeshi; Kubota, Yoshinobu; Yao, Masahiro; Shioi, Koichi; Murakami, Takayuki; Takizawa, Akitoshi; Sano, Futoshi; Kawahara, Takashi; Mizuno, Nobuhiko; Makiyama, Kazuhide; Nakaigawa, Noboru

    2012-01-01

    C-reactive protein (CRP) is considered a useful serum marker for patients with RCC. However, its clinical utility in advanced metastatic renal cell carcinoma (AM-RCC), particularly in deciding whether to perform nephrectomy at the onset, is not well studied. We retrospectively evaluated 181 patients with AM-RCC, including 18 patients underwent potentially curative surgery, 111 underwent cytoreductive nephrectomy, and 52 received medical treatment only. CRP cutoff points were determined by receiver operating characteristic (ROC) curve analysis. Kaplan-Meier and Cox regression analyses were used for survival tests. ROC analysis suggested that grouping patients according to 3 CRP ranges was a rational model. Patients with highly elevated CRP (≥67.0 mg/L) presented remarkably poor prognosis despite treatment (nephrectomy or medical treatment only). Cox regression models demonstrated that risk factors of overall survival for patients who underwent nephrectomy were the CRP ranges defined in this study (≤18.0 mg/L, >18.0 and <67.0 mg/L, and ≥67.0 mg/L), ECOG PS (0, 1, and ≥2), and number of metastatic organ sites (0–1 and ≥2). The retrospective design is a limitation of this study. Our study demonstrated that the serum CRP level is a statistically significant prognostic parameter for patients with AM-RCC. The data also indicated that pretreatment serum CRP level provides useful prognostic information that helps in deciding whether to perform initial nephrectomy for patients with AM-RCC

  9. Acetazolamide-augmented dynamic BOLD (aczBOLD imaging for assessing cerebrovascular reactivity in chronic steno-occlusive disease of the anterior circulation: An initial experience

    Directory of Open Access Journals (Sweden)

    Junjie Wu

    2017-01-01

    Full Text Available The purpose of this study was to measure cerebrovascular reactivity (CVR in chronic steno-occlusive disease using a novel approach that couples BOLD imaging with acetazolamide (ACZ vasoreactivity (aczBOLD, to evaluate dynamic effects of ACZ on BOLD and to establish the relationship between aczBOLD and dynamic susceptibility contrast (DSC perfusion MRI. Eighteen patients with unilateral chronic steno-occlusive disease of the anterior circulation underwent a 20-min aczBOLD imaging protocol, with ACZ infusion starting at 5 min of scan initiation. AczBOLD reactivity was calculated on a voxel-by-voxel basis to generate CVR maps for subsequent quantitative analyses. Reduced CVR was observed in the diseased vs. the normal hemisphere both by qualitative and quantitative assessment (gray matter (GM: 4.13% ± 1.16% vs. 4.90% ± 0.98%, P = 0.002; white matter (WM: 2.83% ± 1.23% vs. 3.50% ± 0.94%, P = 0.005. In all cases BOLD signal began increasing immediately following ACZ infusion, approaching a plateau at ~8.5 min after infusion, with the tissue volume of reduced augmentation increasing progressively with time, peaking at 2.60 min (time range above 95% of the maximum value: 0–4.43 min for the GM and 1.80 min (time range above 95% of the maximum value: 1.40–3.53 min for the WM. In the diseased hemisphere, aczBOLD CVR significantly correlated with baseline DSC time-to-maximum of the residue function (Tmax (P = 0.008 for the WM and normalized cerebral blood flow (P = 0.003 for the GM, and P = 0.001 for the WM. AczBOLD provides a novel, safe, easily implementable approach to CVR measurement in the routine clinical environments. Further studies can establish quantitative thresholds from aczBOLD towards identification of patients at heightened risk of recurrent ischemia and cognitive decline.

  10. A hypothetical study of populations under constant mortality and fertility.

    Science.gov (United States)

    Gupta, R B

    1976-03-01

    28 countries with different characteristics have been selected in order to observe the amount of time it takes for these different countries to reach stable age distributions. The individual populations by sex and age were projected for 150 years in 5-year intervals with the present constant mortality and fertility schedules by component method. Observations have been made by considering the following characteristics of population when it has acquired stability: age distribution; the rate of growth, birthrate, and mortality rate; the population change; the intrinsic rate of growth, birthrate and mortality rate; and approximate time taken to stabilize the population. The initial age distribution has a significant part in the amount of time it takes for a population to acquire stability, and its intrinsic rate of growth is mostly dependent upon the existing age distribution of that population. The time taken for a country's population to become stable depends upon the age distribution, fertility and mortality schedules at the beginning. It has been observed that countries having a higher intrinsic rate of growth take comparatively less time in acquiring stability than the countries having a lower intrinsic rate of growth. The mortality and fertility schedules of a country is another important phenomenon. The populations of the different countries at the point of stability were growing according to their rates of growth. No specific trend of population growth could be found among the groups of countries. Time taken for stabilizing the population is completely based upon age distributions, fertility and mortality schedules a particular country was having at the beginning. The range of time taken for different countries to acquire stability generally ranged from 100 to 135 years. Among the different countries the relationship for the time it takes to acquire stability has not been established. This is a hypothetical approach in order to obtain some idea as to how a

  11. Comparing hypothetical versus non-hypothetical methods for measuring willingness to pay in a food context

    Energy Technology Data Exchange (ETDEWEB)

    Martínez-Carrasco, L.; Brugarolas, M.; Martínez-Poveda, A.; Ruiz-Martínez, J.J.

    2015-07-01

    Choosing a valid procedure to measure willingness to pay (WTP) is crucial for designating optimum price policies or for evaluating the demand for new products. This study compares two methods for obtaining WTP in a food context: a random nth price auction and an open-ended contingent valuation (CV) question. Participants were regular salad tomato buyers of Alicante and they were randomly assigned to one of the two treatments. The products about which they would show their WTP were traditional tomato varieties. Both treatments were divided into three stages: in the first stage the only available information was a reference price for the tomatoes. In stages 2 and 3 we revealed the local origin and the organic grown of the tomatoes respectively. Our results show that in the auction the percentage of participants willing to pay the same or more than the reference price was between 20 and 30%. In the CV method this percentage was between 40 and 65%. The mean WTP in the auction, considering the whole of the individuals, was situated between 1.90 and 2.13 €/kg. These same results obtained through the CV were situated between 2.54 and 3.21 €/kg. The results confirmed the findings of previous papers in which the hypothetical bias of CV was clarified because it yields higher values for WTP than the auction, especially when referring to the number of individuals willing to pay more. Additionally, hedonic price models were estimated for the prices obtained by both methods with the result that in all the models, WTP was directly related to the price paid for the latest purchase of tomatoes. (Author)

  12. Comparing hypothetical versus non-hypothetical methods for measuring willingness to pay in a food context

    Directory of Open Access Journals (Sweden)

    Laura Martínez-Carrasco

    2015-12-01

    Full Text Available Choosing a valid procedure to measure willingness to pay (WTP is crucial for designating optimum price policies or for evaluating the demand for new products. This study compares two methods for obtaining WTP in a food context: a random nth price auction and an open-ended contingent valuation (CV question. Participants were regular salad tomato buyers of Alicante and they were randomly assigned to one of the two treatments. The products about which they would show their WTP were traditional tomato varieties. Both treatments were divided into three stages: in the first stage the only available information was a reference price for the tomatoes. In stages 2 and 3 we revealed the local origin and the organic grown of the tomatoes respectively. Our results show that in the auction the percentage of participants willing to pay the same or more than the reference price was between 20 and 30%. In the CV method this percentage was between 40 and 65%. The mean WTP in the auction, considering the whole of the individuals, was situated between 1.90 and 2.13 €/kg. These same results obtained through the CV were situated between 2.54 and 3.21 €/kg. The results confirmed the findings of previous papers in which the hypothetical bias of CV was clarified because it yields higher values for WTP than the auction, especially when referring to the number of individuals willing to pay more. Additionally, hedonic price models were estimated for the prices obtained by both methods with the result that in all the models, WTP was directly related to the price paid for the latest purchase of tomatoes.

  13. Taskable Reactive Agent Communities

    National Research Council Canada - National Science Library

    Myers, Karen

    2002-01-01

    The focus of Taskable Reactive Agent Communities (TRAC) project was to develop mixed-initiative technology to enable humans to supervise and manage teams of agents as they perform tasks in dynamic environments...

  14. Potential impact of reactive vaccination in controlling cholera ...

    African Journals Online (AJOL)

    Background. To contain ongoing cholera outbreaks, the World Health Organization has suggested that reactive vaccination should be considered in addition to its previous control measures. Objectives. To explore the potential impact of a hypothetical reactive oral cholera vaccination using the example of the recent ...

  15. Evaluation of hypothetical (153)Gd source for use in brachytherapy.

    Science.gov (United States)

    Ghorbani, Mahdi; Behmadi, Marziyeh

    2016-01-01

    The purpose of this work is to evaluate the dosimetric parameters of a hypothetical (153)Gd source for use in brachytherapy and comparison of the dosimetric parameters with those of (192)Ir and (125)I sources. Dose rate constant, the radial dose function and the two dimensional (2D) anisotropy function data for the hypothetical (153)Gd source were obtained by simulation of the source using MCNPX code and then were compared with the corresponding data reported by Enger et al. A comprehensive comparison between this hypothetical source and a (192)Ir source with similar geometry and a (125)I source was performed as well. Excellent agreement was shown between the results of the two studies. Dose rate constant values for the hypothetical (153)Gd, (192)Ir, (125)I sources are 1.173 cGyh(-1) U(-1), 1.044 cGyh(-1) U(-1), 0.925 cGyh(-1) U(-1), respectively. Radial dose function for the hypothetical (153)Gd source has an increasing trend, while (192)Ir has more uniform and (125)I has more rapidly falling off radial dose functions. 2D anisotropy functions for these three sources indicate that, except at 0.5 cm distance, (192)Ir and (125)I have more isotropic trends as compared to the (153)Gd source. A more uniform radial dose function, and 2D anisotropy functions with more isotropy, a much higher specific activity are advantages of (192)Ir source over (153)Gd. However, a longer half-life of (153)Gd source compared to the other two sources, and lower energy of the source with respect to (192)Ir are advantages of using (153)Gd in brachytherapy versus (192)Ir source.

  16. Study of an hypothetical reactor meltdown accident for a 50 MW sub(th) fast reactor

    International Nuclear Information System (INIS)

    Azevedo, E.M. de.

    1983-01-01

    A melhodology for determining the energy released in hypothetical reactor meltdown accidents is presented. A numerical code was developed based upon the Nicholson method for a uniform and homogeneous reactor with spherical geometry. A comparative study with other know programs in the literature which use better approximations for small energy released, shows that the methodology used were compatible with those under comparison. Besides the influence of some parameters on the energy released, such as the initial power level and the prompt neutron lifetime was studied under this metodology and its result exhibitted. The Doppler effect was also analyzed and its influence on the energy released has been emphasized. (Author) [pt

  17. What makes ecological systems reactive?

    Science.gov (United States)

    Snyder, Robin E

    2010-06-01

    Although perturbations from a stable equilibrium must ultimately vanish, they can grow initially, and the maximum initial growth rate is called reactivity. Reactivity thus identifies systems that may undergo transient population surges or drops in response to perturbations; however, we lack biological and mathematical intuition about what makes a system reactive. This paper presents upper and lower bounds on reactivity for an arbitrary linearized model, explores their strictness, and discusses their biological implications. I find that less stable systems (i.e. systems with long transients) have a smaller possible range of reactivities for which no perturbations grow. Systems with more species have a higher capacity to be reactive, assuming species interactions do not weaken too rapidly as the number of species increases. Finally, I find that in discrete time, reactivity is determined largely by mean interaction strength and neither discrete nor continuous time reactivity are sensitive to food web topology. 2010 Elsevier Inc. All rights reserved.

  18. Hypothetical Scenario Generator for Fault-Tolerant Diagnosis

    Science.gov (United States)

    James, Mark

    2007-01-01

    The Hypothetical Scenario Generator for Fault-tolerant Diagnostics (HSG) is an algorithm being developed in conjunction with other components of artificial- intelligence systems for automated diagnosis and prognosis of faults in spacecraft, aircraft, and other complex engineering systems. By incorporating prognostic capabilities along with advanced diagnostic capabilities, these developments hold promise to increase the safety and affordability of the affected engineering systems by making it possible to obtain timely and accurate information on the statuses of the systems and predicting impending failures well in advance. The HSG is a specific instance of a hypothetical- scenario generator that implements an innovative approach for performing diagnostic reasoning when data are missing. The special purpose served by the HSG is to (1) look for all possible ways in which the present state of the engineering system can be mapped with respect to a given model and (2) generate a prioritized set of future possible states and the scenarios of which they are parts.

  19. A Tariff for Reactive Power

    Energy Technology Data Exchange (ETDEWEB)

    Kueck, John D [ORNL; Kirby, Brendan J [ORNL; Li, Fangxing [ORNL; Tufon, Christopher [Pacific Gas and Electric Company; Isemonger, Alan [California Independent System Operator

    2008-07-01

    reduce system losses, increase circuit capacity, increase reliability, and improve efficiency. Reactive power is theoretically available from any inverter-based equipment such as photovoltaic (PV) systems, fuel cells, microturbines, and adjustable-speed drives. However, the installation is usually only economical if reactive power supply is considered during the design and construction phase. In this report, we find that if the inverters of PV systems or the generators of combined heat and power (CHP) systems were designed with capability to supply dynamic reactive power, they could do this quite economically. In fact, on an annualized basis, these inverters and generators may be able to supply dynamic reactive power for about $5 or $6 per kVAR. The savings from the local supply of dynamic reactive power would be in reduced losses, increased capacity, and decreased transmission congestion. The net savings are estimated to be about $7 per kVAR on an annualized basis for a hypothetical circuit. Thus the distribution company could economically purchase a dynamic reactive power service from customers for perhaps $6/kVAR. This practice would provide for better voltage regulation in the distribution system and would provide an alternate revenue source to help amortize the cost of PV and CHP installations. As distribution and transmission systems are operated under rising levels of stress, the value of local dynamic reactive supply is expected to grow. Also, large power inverters, in the range of 500 kW to 1 MW, are expected to decrease in cost as they become mass produced. This report provides one data point which shows that the local supply of dynamic reactive power is marginally profitable at present for a hypothetical circuit. We expect that the trends of growing power flow on the existing system and mass production of inverters for distributed energy devices will make the dynamic supply of reactive power from customers an integral component of economical and reliable

  20. Analyses of hypothetical FCI's in a fast reactor

    International Nuclear Information System (INIS)

    Padilla, A. Jr.; Martin, F.J.; Niccoli, L.G.

    1981-01-01

    Parametric analyses using the SIMMER code were performed to evaluate the potential for a severe recriticality from a pressure-driven recompaction caused by an energetic FCI during the transition phase of a hypothetical accident in a fast reactor. For realistic and reasonable estimates for the assumed accident conditions, a severe recriticality was not predicted. The conditions under which a severe recriticality would be obtained or averted were identified. 10 figures, 2 tables

  1. Genome-wide screens for expressed hypothetical proteins

    DEFF Research Database (Denmark)

    Madsen, Claus Desler; Durhuus, Jon Ambæk; Rasmussen, Lene Juel

    2012-01-01

    A hypothetical protein (HP) is defined as a protein that is predicted to be expressed from an open reading frame, but for which there is no experimental evidence of translation. HPs constitute a substantial fraction of proteomes of human as well as of other organisms. With the general belief that...... that the majority of HPs are the product of pseudogenes, it is essential to have a tool with the ability of pinpointing the minority of HPs with a high probability of being expressed....

  2. Computer codes developed in FRG to analyse hypothetical meltdown accidents

    International Nuclear Information System (INIS)

    Hassmann, K.; Hosemann, J.P.; Koerber, H.; Reineke, H.

    1978-01-01

    It is the purpose of this paper to give the status of all significant computer codes developed in the core melt-down project which is incorporated in the light water reactor safety research program of the Federal Ministry of Research and Technology. For standard pressurized water reactors, results of some computer codes will be presented, describing the course and the duration of the hypothetical core meltdown accident. (author)

  3. Structural and Functional Annotation of Hypothetical Proteins of O139

    Directory of Open Access Journals (Sweden)

    Md. Saiful Islam

    2015-06-01

    Full Text Available In developing countries threat of cholera is a significant health concern whenever water purification and sewage disposal systems are inadequate. Vibrio cholerae is one of the responsible bacteria involved in cholera disease. The complete genome sequence of V. cholerae deciphers the presence of various genes and hypothetical proteins whose function are not yet understood. Hence analyzing and annotating the structure and function of hypothetical proteins is important for understanding the V. cholerae. V. cholerae O139 is the most common and pathogenic bacterial strain among various V. cholerae strains. In this study sequence of six hypothetical proteins of V. cholerae O139 has been annotated from NCBI. Various computational tools and databases have been used to determine domain family, protein-protein interaction, solubility of protein, ligand binding sites etc. The three dimensional structure of two proteins were modeled and their ligand binding sites were identified. We have found domains and families of only one protein. The analysis revealed that these proteins might have antibiotic resistance activity, DNA breaking-rejoining activity, integrase enzyme activity, restriction endonuclease, etc. Structural prediction of these proteins and detection of binding sites from this study would indicate a potential target aiding docking studies for therapeutic designing against cholera.

  4. Processing counterfactual and hypothetical conditionals: an fMRI investigation.

    Science.gov (United States)

    Kulakova, Eugenia; Aichhorn, Markus; Schurz, Matthias; Kronbichler, Martin; Perner, Josef

    2013-05-15

    Counterfactual thinking is ubiquitous in everyday life and an important aspect of cognition and emotion. Although counterfactual thought has been argued to differ from processing factual or hypothetical information, imaging data which elucidate these differences on a neural level are still scarce. We investigated the neural correlates of processing counterfactual sentences under visual and aural presentation. We compared conditionals in subjunctive mood which explicitly contradicted previously presented facts (i.e. counterfactuals) to conditionals framed in indicative mood which did not contradict factual world knowledge and thus conveyed a hypothetical supposition. Our results show activation in right occipital cortex (cuneus) and right basal ganglia (caudate nucleus) during counterfactual sentence processing. Importantly the occipital activation is not only present under visual presentation but also with purely auditory stimulus presentation, precluding a visual processing artifact. Thus our results can be interpreted as reflecting the fact that counterfactual conditionals pragmatically imply the relevance of keeping in mind both factual and supposed information whereas the hypothetical conditionals imply that real world information is irrelevant for processing the conditional and can be omitted. The need to sustain representations of factual and suppositional events during counterfactual sentence processing requires increased mental imagery and integration efforts. Our findings are compatible with predictions based on mental model theory. Copyright © 2013 Elsevier Inc. All rights reserved.

  5. Numerical analysis and simulation of behavior of high burn-up PWR fuel pulse-irradiated in reactivity-initiated accident conditions

    International Nuclear Information System (INIS)

    Suzuki, M.; Sugiyama, T.; Udagawa, Y.; Nagase, F.; Fuketa, T.

    2010-01-01

    The four cases of the NSRR experiments, consisting of two room temperature tests and two high temperature tests, using high burn-up PWR fuel rods are analyzed by using the RANNS code to discuss the fuel behavior in hypothetical pulse-irradiation conditions, and the results are compared with metallography observations of ruptured claddings. The cladding rupture occurred by a shear sliding which starts from the tip of incipient crack generated in the hydride dense layer. The analyses reveal that the onset of shear sliding leading to cladding rupture can be closely associated with the stress intensity factor KI at the crack tip and local plastic strain evolution around the tip as well, and that these two factors depend also on the temperature of cladding. Simulation calculations on the basis of experimental conditions reveals that the cladding stress is dependent on the height and half-width of pulse power, and for the same integral enthalpy of pulse a larger half-width mitigates the severity of transient and decreases KI to allow plastic strain by temperature rise, thus failure possibility would be markedly decreased

  6. CH3-ReO3 on gamma-Al2O3: understanding its structure, initiation,and reactivity in olefin metathesis

    Energy Technology Data Exchange (ETDEWEB)

    Salameh, Alain; Joubert, Jerome; Baudouin, Anne; Lukens, Wayne; Delbecq, Francoise; Sautet, Philippe; Basset, Jean Marie; Coperet,Christophe

    2007-01-20

    Me-ReO3 on gamma-alumina: understanding the structure, theinitiation and thereactivity of a highly active olefin metathesiscatalyst Heterolytic splitting of the C-H bond of the methyl group ofCH3ReO3 on AlsO reactive sites of alumina as a way to generate the activesite of CH3ReO3 supported on gamma-Al203.

  7. ATHENA-2D: A computer code for simulation of hypothetical recriticality accidents in a thermal neutron spectrum

    International Nuclear Information System (INIS)

    Schwinkendorf, K.N.

    1995-01-01

    In a damaged light water reactor core (as in the aftermath of a Three-Mile-Island-like core meltdown), water reflood is performed to carry off decay heat. The severely degraded geometry of the fuel debris bed may increase core reactivity with water reflood. Sufficient boron poisoning of the reflood water is therefore very important. One hypothetical accident is the reintroduction of cooling water that is insufficiently borated, resulting in the damaged reactor attaining criticality in this uncontrolled configuration. The goal in simulating this accident is the prediction of the energy release from the resulting transient

  8. Study on recriticality of fuel debris during hypothetical severe accidents in the Advanced Neutron Source reactor

    International Nuclear Information System (INIS)

    Kim, S.H.; Taleyarkhan, R.P.; Georgevich, V.; Navarro-Valenti, S.; Shin, S.T.

    1995-09-01

    A study has been performed to measure the potential of recriticality during hypothetical severe accident in Advanced Neutron Source (ANS). For the lumped debris configuration in the Reactor Coolant System (RCS), as found in the previous study, recriticality potential may be very low. However, if fuel debris is dispersed and mixed with heavy water in RCS, recriticality potential has been predicted to be substantial depending on thermal-hydraulic conditions surrounding fuel debris mixture. The recriticality potential in RCS is substantially reduced for the three element core design with 50% enrichment. Also, as observed in the previous study, strong dependencies of k eff on key thermal hydraulic parameters are shown. Light water contamination is shown to provide a positive reactivity, and void formation due to boiling of mixed water provides enough negative reactivity and to bring the system down to subcritical. For criticality potential in the subpile room, the lumped debris configuration does not pose a concern. Dispersed configuration in light water pool of the subpile room is also unlikely to result in criticality. However, if the debris is dispersed in the pool that is mixed with heavy water, the results indicate that a substantial potential exists for the debris to reach the criticality. However, if prompt recriticality disperses the debris completely in the subpile room pool, subsequent recriticality may be prevented since neutron leakage effects become large enough

  9. Association between lectin complement pathway initiators, C-reactive protein and left ventricular remodeling in myocardial infarction-a magnetic resonance study

    DEFF Research Database (Denmark)

    Schoos, Mikkel Malby; Munthe-Fog, Lea; Skjoedt, Mikkel-Ole

    2013-01-01

    Lectin complement pathway (LP) activation is an important mechanism in myocardial ischemia reperfusion injury (IRI). LP is activated via the recognition molecules mannose-binding lectin (MBL), ficolins-2 and-3 and is regulated by MBL/Ficolin-associated Protein-1 (MAP-1). Also, C-reactive protein...... (CRP) and ficolin-2 interact in vitro, but the role of the ficolins in IRI is unknown.Methods and results In 55 patients with ST segment elevation myocardial infarction, we investigated the association of LP components and CRP in plasma samples with left ventricular (LV) end systolic and diastolic......-activation in IRI and LV remodeling....

  10. Comparison of the hypothetical (57)Co brachytherapy source with the (192)Ir source.

    Science.gov (United States)

    Toossi, Mohammad Taghi Bahreyni; Ghorbani, Mahdi; Rostami, Atefeh; Khosroabadi, Mohsen; Khademi, Sara; Knaup, Courtney

    2016-01-01

    The (57)Co radioisotope has recently been proposed as a hypothetical brachytherapy source due to its high specific activity, appropriate half-life (272 days) and medium energy photons (114.17 keV on average). In this study, Task Group No. 43 dosimetric parameters were calculated and reported for a hypothetical (57)Co source. A hypothetical (57)Co source was simulated in MCNPX, consisting of an active cylinder with 3.5 mm length and 0.6 mm radius encapsulated in a stainless steel capsule. Three photon energies were utilized (136 keV [10.68%], 122 keV [85.60%], 14 keV [9.16%]) for the (57)Co source. Air kerma strength, dose rate constant, radial dose function, anisotropy function, and isodose curves for the source were calculated and compared to the corresponding data for a (192)Ir source. The results are presented as tables and figures. Air kerma strength per 1 mCi activity for the (57)Co source was 0.46 cGyh(-1) cm 2 mCi(-1). The dose rate constant for the (57)Co source was determined to be 1.215 cGyh(-1)U(-1). The radial dose function for the (57)Co source has an increasing trend due to multiple scattering of low energy photons. The anisotropy function for the (57)Co source at various distances from the source is more isotropic than the (192)Ir source. The (57)Co source has advantages over (192)Ir due to its lower energy photons, longer half-life, higher dose rate constant and more isotropic anisotropic function. However, the (192)Ir source has a higher initial air kerma strength and more uniform radial dose function. These properties make (57)Co a suitable source for use in brachytherapy applications.

  11. Demand curves for hypothetical cocaine in cocaine-dependent individuals.

    Science.gov (United States)

    Bruner, Natalie R; Johnson, Matthew W

    2014-03-01

    Drug purchasing tasks have been successfully used to examine demand for hypothetical consumption of abused drugs including heroin, nicotine, and alcohol. In these tasks, drug users make hypothetical choices whether to buy drugs, and if so, at what quantity, at various potential prices. These tasks allow for behavioral economic assessment of that drug's intensity of demand (preferred level of consumption at extremely low prices) and demand elasticity (sensitivity of consumption to price), among other metrics. However, a purchasing task for cocaine in cocaine-dependent individuals has not been investigated. This study examined a novel Cocaine Purchasing Task and the relation between resulting demand metrics and self-reported cocaine use data. Participants completed a questionnaire assessing hypothetical purchases of cocaine units at prices ranging from $0.01 to $1,000. Demand curves were generated from responses on the Cocaine Purchasing Task. Correlations compared metrics from the demand curve to measures of real-world cocaine use. Group and individual data were well modeled by a demand curve function. The validity of the Cocaine Purchasing Task was supported by a significant correlation between the demand curve metrics of demand intensity and O max (determined from Cocaine Purchasing Task data) and self-reported measures of cocaine use. Partial correlations revealed that after controlling for demand intensity, demand elasticity and the related measure, P max, were significantly correlated with real-world cocaine use. Results indicate that the Cocaine Purchasing Task produces orderly demand curve data, and that these data relate to real-world measures of cocaine use.

  12. Consequences of a hypothetical incident for different sectors

    CERN Document Server

    Bertinelli, F; Garion, C; Jimenez, J M; Parma, V; Perin, A; Schmidt, R; Tavian, L; Tock, J P; van Weelderen, R

    2011-01-01

    During the 2009 long shutdown, the LHC machine has been partially consolidated by adding safety relief devices in order to better protect the cryostats against large helium release and consequently to mitigate the risks of collateral damages. After recalling the present relief valve implementation and other mitigations related to the collateral damages, this paper describes the damage process of a hypothetical incident, presents its consequences for the different sectors and for beam energies up to 5 TeV with emphasis on the induced downtime.

  13. Effects of hypothetical improvised nuclear detonation on the electrical infrastructure

    International Nuclear Information System (INIS)

    Barrett, Christopher L.; Eubank, Stephen; Evrenosoglu, C. Yaman; Marathe, Achla; Marathe, Madhav V.; Phadke, Arun; Thorp, James; Vullikanti, Anil

    2013-01-01

    We study the impacts of a hypothetical improvised nuclear detonation (IND) on the electrical infrastructure and its cascading effects on other urban inter-dependent infrastructures of a major metropolitan area in the US. We synthesize open source information, expert knowledge, commercial software and Google Earth data to derive a realistic electrical transmission and distribution network spanning the region. A dynamic analysis of the geo-located grid is carried out to determine the cause of malfunction of components, and their short-term and long-term effect on the stability of the grid. Finally a detailed estimate of the cost of damage to the major components of the infrastructure is provided.

  14. Effects of hypothetical improvised nuclear detonation on the electrical infrastructure

    Energy Technology Data Exchange (ETDEWEB)

    Barrett, Christopher L.; Eubank, Stephen; Evrenosoglu, C. Yaman; Marathe, Achla; Marathe, Madhav V.; Phadke, Arun; Thorp, James; Vullikanti, Anil [Virginia Tech, Blacksburg, VA (United States). Network Dynamics and Simulation Science Lab.

    2013-07-01

    We study the impacts of a hypothetical improvised nuclear detonation (IND) on the electrical infrastructure and its cascading effects on other urban inter-dependent infrastructures of a major metropolitan area in the US. We synthesize open source information, expert knowledge, commercial software and Google Earth data to derive a realistic electrical transmission and distribution network spanning the region. A dynamic analysis of the geo-located grid is carried out to determine the cause of malfunction of components, and their short-term and long-term effect on the stability of the grid. Finally a detailed estimate of the cost of damage to the major components of the infrastructure is provided.

  15. 33 CFR Appendix B to Part 277 - Hypothetical Example of Cost Apportionment

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Hypothetical Example of Cost... APPORTIONMENT OF BRIDGE ALTERATIONS Pt. 277, App. B Appendix B to Part 277—Hypothetical Example of Cost... bridge was completed in 1908 and the superstructure completed in 1909. For this hypothetical example it...

  16. The impact of SOA for achieving healthcare interoperability. An empirical investigation based on a hypothetical adoption.

    Science.gov (United States)

    Daskalakis, S; Mantas, J

    2009-01-01

    The evaluation of a service-oriented prototype implementation for healthcare interoperability. A prototype framework was developed, aiming to exploit the use of service-oriented architecture (SOA) concepts for achieving healthcare interoperability and to move towards a virtual patient record (VPR) paradigm. The prototype implementation was evaluated for its hypothetical adoption. The evaluation strategy was based on the initial proposition of the DeLone and McLean model of information systems (IS) success [1], as modeled by Iivari [2]. A set of SOA and VPR characteristics were empirically encapsulated within the dimensions of IS success model, combined with measures from previous research works. The data gathered was analyzed using partial least squares (PLS). The results highlighted that system quality is a partial predictor of system use but not of user satisfaction. On the contrary, information quality proved to be a significant predictor of user satisfaction and partially a strong significant predictor of system use. Moreover, system use did not prove to be a significant predictor of individual impact whereas the bi-directional relation between use and user satisfaction did not confirm. Additionally, user satisfaction was found to be a strong significant predictor of individual impact. Finally, individual impact proved to be a strong significant predictor of organizational impact. The empirical study attempted to obtain hypothetical, but still useful beliefs and perceptions regarding the SOA prototype implementation. The deduced observations can form the basis for further investigation regarding the adaptability of SOA implementations with VPR characteristics in the healthcare domain.

  17. Trial of risk assessment of a hypothetical nuclear facility

    International Nuclear Information System (INIS)

    Terao, Norichika; Suzuki, Mitsutoshi

    2013-01-01

    An equation for risk assessment in physical protection is shown by a probability of an adversary attack during a period time, P A , a probability of system effectiveness, P E , and consequence value, C. In addition, P E is shown as the multiplication of a probability of interruption of the facility, P I , by a probability of neutralization by response force, P N . In this study, it is assumed that an adversary assaults a hypothetical nuclear facility. The new quantification method about P A and P I in risk evaluation formula is devised, and risk assessment is attempted. In case of P A , the possibility of assaults against a nuclear facility is discussed by using terrorism data written in the open source database of terrorism, Global Terrorism Database (GTD), summarized by University of Maryland. In addition, it is discussed about P I by using the way of thinking of a risk assessment tool, EASI, developed by the Sandia National Laboratories (SNL). In the hypothetical nuclear facility, the performance of response force, sensors, and communication is expressed quantitatively by probability distribution based on some assumptions. (author)

  18. Evaluation of Nuclide Release Scenarios for a Hypothetical LILW Repository

    International Nuclear Information System (INIS)

    Lee, Youn Myoung; Jeong, Jong Tae

    2010-11-01

    A program for the safety assessment and performance evaluation of a low- and intermediate-level radioactive waste (LILW) repository system has been developed. Utilizing GoldSim (GoldSim, 2006), the program evaluates nuclide release and transport into the geosphere and biosphere under various disruptive natural and manmade events and scenarios that can occur after a waste package failure. We envisaged and illustrated these events and scenarios as occurring after the closure of a hypothetical LILW repository, and they included the degradation of various manmade barriers, pumping well drilling, and natural disruptions such as the sudden formation of a preferential flow pathway in the far-field area of the repository. Possible enhancement of nuclide transport facilitated by colloids or chelating agents is also dealt with. We used the newly-developed GoldSim template program, which is capable of various nuclide release scenarios and is greatly suited for simulating a potential repository given the geological circumstances in Korea, to create the detailed source term and near-field release scheme, various nuclide transport modes in the far-field geosphere area, and the biosphere transfer. Even though all parameter values applied to the hypothetical repository were assumed, the illustrative results, particularly the probabilistic calculations and sensitivity studies, may be informative under various scenarios

  19. Reactivity and isotopic composition of spent PWR [pressurized-water-reactor] fuel as a function of initial enrichment, burnup, and cooling time

    International Nuclear Information System (INIS)

    Cerne, S.P.; Hermann, O.W.; Westfall, R.M.

    1987-10-01

    This study presents the reactivity loss of spent PWR fuel due to burnup in terms of the infinite lattice multiplications factor, k/sub ∞/. Calculations were performed using the SAS2 and CSAS1 control modules of the SCALE system. The k/sub ∞/ values calculated for all combinations of six enrichments, seven burnups, and five cooling times. The results are presented as a primary function of enrichment in both tabular and graphic form. An equation has been developed to estimate the tabulated values of k/sub ∞/'s by specifying enrichment, cooling time, and burnup. Atom densities for fresh fuel, and spent fuel at cooling times of 2, 10, and 20 years are included. 13 refs., 8 figs., 8 tabs

  20. Remediating Contaminant Plumes in Groundwater with Shallow Excavations Containing Coarse Reactive Media.

    Science.gov (United States)

    Hudak, Paul F

    2018-02-01

    A groundwater flow and mass transport model tested the capability of shallow excavations filled with coarse, reactive media to remediate a hypothetical unconfined aquifer with a maximum saturated thickness of 5 m. Modeled as contaminant sinks, the rectangular excavations were 10 m downgradient of an initial contaminant plume originating from a source at the top of the aquifer. The initial plume was approximately 259 m long, 23 m wide, and 5 m thick, with a downgradient tip located approximately 100 m upgradient of the site boundary. The smallest trench capable of preventing offsite migration was 11 m long (measured perpendicular to groundwater flow), 4 m wide (measured parallel to groundwater flow), and 3 m deep. Results of this study suggest that shallow trenches filled with coarse filter media that partially penetrate unconfined aquifers may be a viable alternative for remediating contaminated groundwater at some sites.

  1. BEACON/MOD2A analysis of the Arkansas-1 reactor cavity during a hypothetical hot leg break

    International Nuclear Information System (INIS)

    Ramsthaler, J.A.

    1979-01-01

    As part of the evaluation of the new MOD2A version of the BEACON code, the Arkansas-1 reactor cavity was modeled during a hypothetical loss-of-coolant accident. Results of the BEACON analysis were compared with results obtained previously with the COMPARE containment code. Studies were also made investigating some of the BEACON interphasic, timestep control, and wall heat transfer options to assure that these models were working properly and to observe their effects on the results. Descriptions of the Arkansas-1 reactor cavity, initial assumptions during the hypothetical LOCA, and methods of modeling with BEACON are presented. Some of the problems encountered in accurately modeling the penetrations surrounding the hot and cold leg pipes are also discussed

  2. RELAP 5 Simulations of a hypothetical LOCA in Ringhals 2

    International Nuclear Information System (INIS)

    Caraher, D.

    1987-01-01

    RELAP5 simulations of a hypothetical LOCA in Ringhals 2 were conducted in order to determine the sensitivity of the calculated peak cladding temperature (PCT) to Appendix K requirements. The PCT was most sensitive to the assumed model decay heat: Changing from the 1979 ANS Standard to 1.2 times the 1973 Standard increased the PCT by 70 to 100K. After decay heat, the two parameters which affected the PCT the most were steam generator heat transfer and heat transfer lockout. The PCT was not sensitive to the assumed pump rotor condition (locked vs coasting); nor was it sensitive to a modest amount (5 to 10%) of steam generator tube plugging. (author)

  3. Hanford groundwater transport estimates for hypothetical radioactive waste incidents

    International Nuclear Information System (INIS)

    Arnett, R.C.; Brown, D.J.; Baca, R.G.

    1977-06-01

    This report presents an analysis of the impact of subsurface contamination resulting from a series of hypothetical leaks or accidents involving Hanford high-level radioactive defense waste. Estimates of the amounts and concentrations of radionuclides reaching the Columbia River through the Hanford unconfined aquifer flow path were obtained by means of predictive models. The results of the study showed that the spatially averaged concentrations of 99 Tc, 3 H, and 106 Ru in the ground water as it discharges into the Columbia River are at all times far below the respective ERDA Manual Chapter 0524 Concentration Guides for uncontrolled areas. Upon entering the Columbia River, additional large dilutions of the water containing trace quantities of contaminants will occur

  4. Willingness to pay for three hypothetical malaria vaccines in Nigeria.

    Science.gov (United States)

    Udezi, Waka Anthony; Usifoh, Cyril Odianose; Ihimekpen, Omoyeme Oluwatosin

    2010-08-01

    Unlike some African countries that have reported a approximately 50% reduction in malaria deaths in recent years, Nigeria has shown no evidence of a systematic decline in malaria burden. An important and sustainable reduction in malaria burden cannot be achieved unless an effective and inexpensive malaria vaccine becomes available. The goals of this study were to determine the willingness to pay (WTP) for 3 hypothetical malaria vaccines with different levels of protection (in years), effectiveness, and adverse effects; and to identify factors that influence the price that people are willing to pay in Nigeria. With the aid of a questionnaire, a contingent valuation method using payment cards was used to elicit WTP values for 3 hypothetical malaria vaccines. Payment cards contained both a description of the features of the vaccine being evaluated and price options. The 3 hypothetical vaccines had the following characteristics: vaccine A was 75% effective, protected for 3 years, and was well tolerated; vaccine B was 85% effective, protected for 6 years, and was less well tolerated than vaccine A; and vaccine C was 95% effective and protected for 12 years, but was the least well tolerated. Participants consisted of a convenience sample of individuals who were at the pharmacy waiting area of the state-owned hospitals located in Benin City and Warri, Nigeria. Every third patient or caregiver who was in the pharmacy to fill a prescription was asked to take part in the study as they waited to see the pharmacist. If consent was not granted, the next person in line was approached to be interviewed. Linear multiple regression analysis and nonparametric Kruskal-Wallis, Mann-Whitney, or chi(2) test was applied in inferential analysis, where necessary, to investigate the effects of sociodemographic factors on WTP. Prices on payment cards were expressed in Nigerian naira (NGN 150.00 approximately US $1.00), but study results were expressed in US dollars. A total of 359

  5. Calculated magnetocrystalline anisotropy of existing and hypothetical MCo5 compounds

    International Nuclear Information System (INIS)

    Opahle, Ingo; Richter, Manuel; Kuz'min, Michael D.; Nitzsche, Ulrike; Koepernik, Klaus; Schramm, Lutz

    2005-01-01

    The magnetic properties, lattice parameters and formation enthalpies of existing and hypothetical MCo 5 compounds (M=Y, La, Th, Mg, Ca and Sr) are calculated within the framework of density functional theory. In these compounds the magnetocrystalline anisotropy energy is dominated by itinerant Co 3d contributions. Band energy calculations suggest that-within in a rigid band picture-anisotropy energies of comparable size to those of hard magnetic materials containing rare earths could be obtained by hole doping of YCo 5 , e.g. by the substitution of Ca or Mg for Y. This idea is confirmed by the presented total energy calculations. However, the calculated enthalpies of formation suggest that CaCo 5 and MgCo 5 could only be prepared by non-equilibrium methods

  6. Study on the experimental VHTR safety with analysis for a hypothetical rapid depressurization accident

    International Nuclear Information System (INIS)

    Mitake, S.; Suzuki, K.; Ohno, T.; Okada, T.

    1982-01-01

    A hypothetical rapid depressurization accident of the experimental VHTR has been analyzed, including all phenomena in the accident, from its initiating depressurization of the coolant to consequential radiological hazard. Based on reliability analysis of the engineered safety features, all possible sequences, in which the safety systems are in success or in failure, have been investigated with event tree analysis. The result shows the inherent safety characteristics of the reactor and the effectiveness of the engineered safety features. And through the analysis, it has been indicated that further investigations on some phenomena in the accident, e.g., air ingress by natural circulation flow and fission product transport in the plant, will bring forth more reasonable and sufficient safety of the reactor

  7. Reactive Arthritis

    Directory of Open Access Journals (Sweden)

    Eren Erken

    2013-06-01

    Full Text Available Reactive arthritis is an acute, sterile, non-suppurative and inflammatory arthropaty which has occured as a result of an infectious processes, mostly after gastrointestinal and genitourinary tract infections. Reiter syndrome is a frequent type of reactive arthritis. Both reactive arthritis and Reiter syndrome belong to the group of seronegative spondyloarthropathies, associated with HLA-B27 positivity and characterized by ongoing inflammation after an infectious episode. The classical triad of Reiter syndrome is defined as arthritis, conjuctivitis and urethritis and is seen only in one third of patients with Reiter syndrome. Recently, seronegative asymmetric arthritis and typical extraarticular involvement are thought to be adequate for the diagnosis. However, there is no established criteria for the diagnosis of reactive arthritis and the number of randomized and controlled studies about the therapy is not enough. [Archives Medical Review Journal 2013; 22(3.000: 283-299

  8. mGluR5 stimulating Homer–PIKE formation initiates icariin induced cardiomyogenesis of mouse embryonic stem cells by activating reactive oxygen species

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Limin; Huang, Yujie; Zhang, Yingying [Institute of Pharmacology, Toxicology and Biochemical Pharmaceutics, College of Pharmaceutical Sciences, Zhejiang University, No. 866, Yu Hang Tang Road, Hangzhou 310058 (China); Zhao, Qingwei [The First Affiliated Hospital, College of Medicine, Zhejiang University, No. 79, Qing Chun Road, Hangzhou 310003 (China); Zheng, Bei; Lou, Yijia [Institute of Pharmacology, Toxicology and Biochemical Pharmaceutics, College of Pharmaceutical Sciences, Zhejiang University, No. 866, Yu Hang Tang Road, Hangzhou 310058 (China); Zhu, Danyan, E-mail: zdyzxb@zju.edu.cn [Institute of Pharmacology, Toxicology and Biochemical Pharmaceutics, College of Pharmaceutical Sciences, Zhejiang University, No. 866, Yu Hang Tang Road, Hangzhou 310058 (China)

    2013-06-10

    Icariin (ICA) has been reported to facilitate cardiac differentiation of mouse embryonic stem (ES) cells; however, the mechanism by which ICA induced cardiomyogenesis has not been fully elucidated yet. Here, an underlying signaling network including metabotropic glutamate receptor 5 (mGluR5), Homer, phosphatidylinositol 3-Kinase Enhancer (PIKE), phosphatidylinositol 3-Kinase (PI3K), reactive oxygen species (ROS) and nuclear factor-kappaB (NF-κB) was investigated in ICA induced cardiomyogenesis. Our results showed that the co-expression of mGluR5 together with α-actinin or Troponin T in embryoid bodies (EBs) treated with ICA was elevated to 10.86% and 9.62%, compared with the case in the control (4.04% and 3.45%, respectively). Exposure of EBs to ICA for 2 h remarkably increased the dimeric form of mGluR5, which was inhibited by small interfering RNA targeting mGluR5 (si-mGluR5). Moreover, the extracellular glutamate concentration in ICA treatment medium was elevated to 28.9±3.5 μM. Furthermore, the activation of mGluR5 by ICA triggered the formation of Homer–PIKE complex and activated PI3K, stimulating ROS generation and NF-κB nuclear translocation. Knockdown of mGluR5 or inhibition of PI3K by LY294002 blocked ICA induced cardiomyogenesis via repressing mGluR5 pathway, reducing ROS and NF-κB activation. These results revealed that the inducible mechanisms of ICA were related to activate mGluR5 pathway. -- Highlights: • ICA increased mGluR5 expression in cardiac differentiation of ES cells. • ICA enhanced the glutamate level and the receptor mGluR5 dimerization, stimulating the formation of Homer–PIKE complex. • Knockdown of mGluR5 or inhibition of PI3K by LY294002 inhibited ICA induced ROS generation and NF-κB nuclear translocation.

  9. Interfacial adhesion improvement in carbon fiber/carbon nanotube reinforced hybrid composites by the application of a reactive hybrid resin initiated by gamma irradiation

    Science.gov (United States)

    Szebényi, G.; Faragó, D.; Lámfalusi, Cs.; Göbl, R.

    2018-04-01

    Interfacial adhesion is a key factor in composite materials. The effective co-working of the reinforcing materials and matrix is essential for the proper load transfer between them, and to achieve the desired reinforcing effect. In case of nanocomposites, especially carbon nanotube (CNT) reinforced nanocomposites the adhesion between the CNTs and the polymer matrix is poor. To improve the interfacial adhesion and exploit the reinforcing effect of these nanoparticles a two step curable epoxy (EP)/vinylester (VE) hybrid resin system was developed where the EP is cured using hardener in the first step, during the composite production, and in the second step the curing of the VE is initiated by gamma irradiation, which also activates the reinforcing materials and the cured matrix component. A total of six carbon fiber reinforced composite systems were compared with neat epoxy and EP/VE hybrid matrices with and without chemical initiator and MWCNT nano-reinforcement. The effect of gamma irradiation was investigated at four absorbed dose levels. According to our three point bending and interlaminar shear test results the adhesion has improved between all constituents of the composite system. It was demonstrated that gamma irradiation has beneficial effect on the static mechanical, especially interlaminar properties of both micro- and nanocomposites in terms of modulus, strength and interlaminar shear strength.

  10. Radiological Consequence Analyses Following a Hypothetical Severe Accident in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Juyub; Kim, Juyoul [FNC Technology Co., Yongin (Korea, Republic of)

    2016-10-15

    In order to reflect the lessons learned from the Fukushima Daiichi nuclear power plant accident, a simulator which is named NANAS (Northeast Asia Nuclear Accident Simulator) for overseas nuclear accident has been developed. It is composed of three modules: source-term estimation, atmospheric dispersion prediction and dose assessment. For the source-term estimation module, the representative reactor types were selected as CPR1000, BWR5 and BWR6 for China, Japan and Taiwan, respectively. Considering the design characteristics of each reactor type, the source-term estimation module simulates the transient of design basis accident and severe accident. The atmospheric dispersion prediction module analyzes the transport and dispersion of radioactive materials and prints out the air and ground concentration. Using the concentration result, the dose assessment module calculates effective dose and thyroid dose in the Korean Peninsula region. In this study, a hypothetical severe accident in Japan was simulated to demonstrate the function of NANAS. As a result, the radiological consequence to Korea was estimated from the accident. PC-based nuclear accident simulator, NANAS, has been developed. NANAS contains three modules: source-term estimation, atmospheric dispersion prediction and dose assessment. The source-term estimation module simulates a nuclear accident for the representative reactor types in China, Japan and Taiwan. Since the maximum calculation speed is 16 times than real time, it is possible to estimate the source-term release swiftly in case of the emergency. The atmospheric dispersion prediction module analyzes the transport and dispersion of radioactive materials in wide range including the Northeast Asia. Final results of the dose assessment module are a map projection and time chart of effective dose and thyroid dose. A hypothetical accident in Japan was simulated by NANAS. The radioactive materials were released during the first 24 hours and the source

  11. Modeling a Hypothetical 170Tm Source for Brachytherapy Applications

    International Nuclear Information System (INIS)

    Enger, Shirin A.; D'Amours, Michel; Beaulieu, Luc

    2011-01-01

    Purpose: To perform absorbed dose calculations based on Monte Carlo simulations for a hypothetical 170 Tm source and to investigate the influence of encapsulating material on the energy spectrum of the emitted electrons and photons. Methods: GEANT4 Monte Carlo code version 9.2 patch 2 was used to simulate the decay process of 170 Tm and to calculate the absorbed dose distribution using the GEANT4 Penelope physics models. A hypothetical 170 Tm source based on the Flexisource brachytherapy design with the active core set as a pure thulium cylinder (length 3.5 mm and diameter 0.6 mm) and different cylindrical source encapsulations (length 5 mm and thickness 0.125 mm) constructed of titanium, stainless-steel, gold, or platinum were simulated. The radial dose function for the line source approximation was calculated following the TG-43U1 formalism for the stainless-steel encapsulation. Results: For the titanium and stainless-steel encapsulation, 94% of the total bremsstrahlung is produced inside the core, 4.8 and 5.5% in titanium and stainless-steel capsules, respectively, and less than 1% in water. For the gold capsule, 85% is produced inside the core, 14.2% inside the gold capsule, and a negligible amount ( 170 Tm source is primarily a bremsstrahlung source, with the majority of bremsstrahlung photons being generated in the source core and experiencing little attenuation in the source encapsulation. Electrons are efficiently absorbed by the gold and platinum encapsulations. However, for the stainless-steel capsule (or other lower Z encapsulations) electrons will escape. The dose from these electrons is dominant over the photon dose in the first few millimeter but is not taken into account by current standard treatment planning systems. The total energy spectrum of photons emerging from the source depends on the encapsulation composition and results in mean photon energies well above 100 keV. This is higher than the main gamma-ray energy peak at 84 keV. Based on our

  12. Computational structural and functional analysis of hypothetical proteins of Staphylococcus aureus

    OpenAIRE

    Mohan, Ramadevi; Venugopal, Subhashree

    2012-01-01

    Genome sequencing projects has led to an explosion of large amount of gene products in which many are of hypothetical proteins with unknown function. Analyzing and annotating the functions of hypothetical proteins is important in Staphylococcus aureus which is a pathogenic bacterium that cause multiple types of diseases by infecting various sites in humans and animals. In this study, ten hypothetical proteins of Staphylococcus aureus were retrieved from NCBI and analyzed for their structural ...

  13. A hypothetical severe reactor accident in Sosnovyj Bor, Russia

    International Nuclear Information System (INIS)

    Lahtinen, J.; Toivonen, H.; Poellaenen, R.; Nordlund, G.

    1993-12-01

    Individual doses and short-term radiological consequences from a hypothetical severe accident at the Russian nuclear power plant in Sosnovyj Bor were estimated for two sites in Finland. The sites are Kotka, located 140 km from the plant, and Helsinki, 220 km from the plant. The release was assumed to start immediately after the shutdown of the reactor (a 1000 MW RBMK unit) which had been operating at nominal power level for a long time. An effective release height of 500 m was assumed. The prevailing meteorological conditions during the release were taken to present the situation typical of the area (effective wind speed 9 m/s, neutral dispersion conditions). The release fractions applied in the study were of the same order as in the Chernobyl accident, i.e. 100% for noble gases, 60% for iodines, 40% for cesium and 1-10% for other radiologically important nuclides. The release was assumed to last 24 hours. However, half of the nuclides were released during the first hour. No attention was paid to the actual sequence of events that could lead to such release characteristics and time behaviour. The concentration and dose calculations were performed with a modified version of the computer code OIVA developed in Finnish Centre for Radiation and Nuclear Safety. Inhalation dose and external doses from the release plume and from the deposited activity were calculated for adults only, and no sheltering was considered. (11 refs., 4 figs., 6 tabs.)

  14. Shock loading of reactor vessel following hypothetical core disruptive accident

    International Nuclear Information System (INIS)

    Srinivas, G.; Doshi, J.B.

    1990-01-01

    Hypothetical Core Disruptive Accident (HCDA) has been historically considered as the maximum credible accident in Fast Breeder Reactor systems. Environmental consequences of such an accident depends to a great extent on the ability of the reactor vessel to maintain integrity during the shock loading following an HCDA. In the present paper, a computational model of the reactor core and the surrounding coolant with a free surface is numerical technique. The equations for conservation of mass, momentum and energy along with an equation of state are considered in two dimensional cylindrical geometry. The reactor core at the end of HCDA is taken as a bubble of hot, vaporized fuel at high temperature and pressure, formed at the center of the reactor vessel and expanding against the surrounding liquid sodium coolant. The free surface of sodium at the top of the vessel and the movement of the core bubble-liquid coolant interface are tracked by Marker and Cell (MAC) procedure. The results are obtained for the transient pressure at the vessel wall and also for the loading on the roof plug by the impact of the slug of liquid sodium. The computer code developed is validated against a benchmark experiment chosen to be ISPRA experiment reported in literature. The computer code is next applied to predict the loading on the Indian Prototype Fast Breeder Reactor (PFBR) being developed at Kalpakkam

  15. Simulation of Groundwater Mounding Beneath Hypothetical Stormwater Infiltration Basins

    Science.gov (United States)

    Carleton, Glen B.

    2010-01-01

    Groundwater mounding occurs beneath stormwater management structures designed to infiltrate stormwater runoff. Concentrating recharge in a small area can cause groundwater mounding that affects the basements of nearby homes and other structures. Methods for quantitatively predicting the height and extent of groundwater mounding beneath and near stormwater Finite-difference groundwater-flow simulations of infiltration from hypothetical stormwater infiltration structures (which are typically constructed as basins or dry wells) were done for 10-acre and 1-acre developments. Aquifer and stormwater-runoff characteristics in the model were changed to determine which factors are most likely to have the greatest effect on simulating the maximum height and maximum extent of groundwater mounding. Aquifer characteristics that were changed include soil permeability, aquifer thickness, and specific yield. Stormwater-runoff variables that were changed include magnitude of design storm, percentage of impervious area, infiltration-structure depth (maximum depth of standing water), and infiltration-basin shape. Values used for all variables are representative of typical physical conditions and stormwater management designs in New Jersey but do not include all possible values. Results are considered to be a representative, but not all-inclusive, subset of likely results. Maximum heights of simulated groundwater mounds beneath stormwater infiltration structures are the most sensitive to (show the greatest change with changes to) soil permeability. The maximum height of the groundwater mound is higher when values of soil permeability, aquifer thickness, or specific yield are decreased or when basin depth is increased or the basin shape is square (and values of other variables are held constant). Changing soil permeability, aquifer thickness, specific yield, infiltration-structure depth, or infiltration-structure shape does not change the volume of water infiltrated, it changes the

  16. Studies of hypothetical and fundamental decay properties of positronium

    International Nuclear Information System (INIS)

    Wahl, W.

    1985-05-01

    For the solution of the CP problem in the standard theory of the strong interaction the existence of a neutral pseudoscalar boson was postulated which couples to quarks and leptons. If the mass of this so-called axion is smaller than two electron masses for orthopositronium 'o-Ps' the decay into one photon and axion is expected in concurrence to the standard decay into three photons. The detection of a monoenergetic photon would be an indication for this decay channel because the axion would only very weakly interact with matter. In the spectrum no lineshape of a monoenergetic photon is observed. From this results in dependence on the mass of a hypothetical particle and with a confidence limit of 90% for the branching ratio of o-Ps an upper limit which is in the range between 320 keV and 950 keV less than 10 -7 . Applied to the axion model an upper limit for the mass of the standard axion of 250 keV results. For the study of the fundamental decay properties of positronium the lifetime of o-Ps and the 3γ energy distribution of the decay quanta were measured. Furthermore the rare 4γ decay of para-positronium 'p-Ps' was searched for. The measured lifetime of o-Ps τ=141.2±1.2ns agrees well with the theoretical value. Calculations on the 3γ energy distribution are confirmed. For the 4γ decay of p-Ps predicted by QED with a branching ratio of ≅ 1.5x10 -6 an upper limit of 2x10 -5 results. (orig./HSI) [de

  17. Vulnerability Analysis of Physical Protection System at Hypothetical Facility

    International Nuclear Information System (INIS)

    Jung, Won Moog; Lee, Ho Jin; Yu, Dong Han; Min, Gyung Sik

    2006-01-01

    Since the 9/11 event in the U.S.A, International terror possibilities has been increasing for nuclear facilities including nuclear power plants(NPPs). It is necessary to evaluate the performance of an existing physical protection system(PPS) at nuclear facilities based on such malevolent acts. A PPS is a complex configuration of detection, delay, and response elements. Detection, delay, and response elements are all important to the analysis and evaluation of a PPS and its effectiveness. Methods are available to analyze a PPS and evaluate its effectiveness. Sandia National Laboratory(SNL) in the U.S.A was developed a System Analysis of Vulnerability to Intrusion (SAVI) computer code for evaluating the effectiveness of PPS against outsider threats. This study presents the vulnerability analysis of the PPS at hypothetical facility using SAVI code that the basic input parameters are from PPS of Hanaro Research Reactor at Korea Atomic Energy Research Institution. It is understand that PPS of research reactor and critical assemblies are deficient that that of NPP and nuclear materials of RRCAS are compact to transport For analysis, first, the site-specific Adversary Sequence Diagrams(ASDs) of the PPS is constructed. It helps to understand the functions of the existing PPS composed of physical areas and Protection Elements(PEs). Then, the most vulnerable path of an ASD as a measure of effectiveness is determined. The results in the analysis can used to suggest the possible PPS upgrades to the most vulnerable paths for the system like research reactor

  18. MCO gas composition for low reactive surface areas

    International Nuclear Information System (INIS)

    Packer, M.J.

    1998-01-01

    This calculation adjusts modeled output (HNF-SD-SNF-TI-040, Rev. 2) by considering lower reactive fuel surface areas and by increasing the input helium backfill overpressure from 0.5 to 1.5 atm (2.5 atm abs) to verify that MCO gas-phase oxygen concentrations can remain below 4 mole % over a 40 year interim period under a worst case condition of zero reactive surface area. Added backfill gas will dilute any gases generated during interim storage and is a strategy within the current design capability. The zero reactive surface area represents a hypothetical worst case example where there is no fuel scrap and/or damaged spent fuel rods in an MCO. Also included is a hypothetical case where only K East fuel exists in an MCO with an added backfill overpressure of 0.5 atm (1.5 atm abs)

  19. Point-of-views representation for hypothetical reasoning: application to decision-aid

    International Nuclear Information System (INIS)

    Diaz, Antoine

    1992-01-01

    Most of the knowledge based Decision Support Systems must deal with two difficulties in problem solving representation: reasoning with incomplete knowledge and managing contradictory reasoning. We propose a method which answers the question of reasoning revision when a contradiction occurs, while preserving the functionalities of the De Kleer's ATMS System for simulating hypothetical reasoning. As a matter of fact, these functionalities are particularly suitable for decision aiding problems. In order to formalize the ATMS, we use a resolution method called Cat-resolution (Cayrol and Tayrac). This method allows the computation of ATMS functions relating to a set of propositional clauses by saturating this set. Owing to this choice, we can use the same principles as ATMS on the saturation trace. Each clause in the saturated set can be linked to the sets of initial clauses justifying its derivation by Cat-resolution. The reasoning inconsistency is now managed. First the user can identify the source of the inconsistency thanks to the empty clause explanation. Then he can try to restore the reasoning consistency by relaxing at least one of the initial clauses justifying the empty clause. The computation of 'partial' ATMS, representing a point of view in the decision-making problem, is more effective owing to the justifications of the derived clauses. (author) [fr

  20. 47 CFR 69.608 - Carrier Common Line hypothetical net balance.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 3 2010-10-01 2010-10-01 false Carrier Common Line hypothetical net balance. 69.608 Section 69.608 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER... net balance. The hypothetical net balance shall be equal to a Carrier Common Line revenue requirement...

  1. Using respondent uncertainty to mitigate hypothetical bias in a stated choice experiment

    Science.gov (United States)

    Richard C. Ready; Patricia A. Champ; Jennifer L. Lawton

    2010-01-01

    In a choice experiment study, willingness to pay for a public good estimated from hypothetical choices was three times as large as willingness to pay estimated from choices requiring actual payment. This hypothetical bias was related to the stated level of certainty of respondents. We develop protocols to measure respondent certainty in the context of a choice...

  2. Can a Repeated Opt-Out Reminder remove hypothetical bias in discrete choice experiments?

    DEFF Research Database (Denmark)

    Alemu, Mohammed Hussen; Olsen, Søren Bøye

    hypothetical bias in stated DCE. The data originates from a field experiment concerning consumer preferences for a novel food product made from cricket flour. Utilizing a between-subject design with three treatments, we find significantly higher marginal willingness to pay values in hypothetical than...

  3. Adolescents' explicit and implicit evaluations of hypothetical and actual peers with different bullying participant roles.

    Science.gov (United States)

    Pouwels, J Loes; Lansu, Tessa A M; Cillessen, Antonius H N

    2017-07-01

    This study examined how adolescents evaluate bullying at three levels of specificity: (a) the general concept of bullying, (b) hypothetical peers in different bullying participant roles, and (c) actual peers in different bullying participant roles. Participants were 163 predominantly ethnic majority adolescents in The Netherlands (58% girls; M age =16.34years, SD=0.79). For the hypothetical peers, we examined adolescents' explicit evaluations as well as their implicit evaluations. Adolescents evaluated the general concept of bullying negatively. Adolescents' explicit evaluations of hypothetical and actual peers in the bullying roles depended on their own role, but adolescents' implicit evaluations of hypothetical peers did not. Adolescents' explicit evaluations of hypothetical peers and actual peers were different. Hypothetical bullies were evaluated negatively by all classmates, whereas hypothetical victims were evaluated relatively positively compared with the other roles. However, when adolescents evaluated their actual classmates, the differences between bullies and the other roles were smaller, whereas victims were evaluated the most negatively of all roles. Further research should take into account that adolescents' evaluations of hypothetical peers differ from their evaluations of actual peers. Copyright © 2017 Elsevier Inc. All rights reserved.

  4. Explaining the discrepancy between intentions and actions: the case of hypothetical bias in contingent valuation

    Science.gov (United States)

    Icek Ajzen; Thomas C. Brown; Franklin Carvajal

    2004-01-01

    An experiment was designed to account for intention-behavior discrepancies by applying the theory of planned behavior to contingent valuation. College students (N = 160) voted in hypothetical and real payment referenda to contribute $8 to a scholarship fund. Overestimates of willingness to pay in the hypothetical referendum could not be attributed to moderately...

  5. Combining aptamers and in silico interaction studies to decipher the function of hypothetical proteins

    DEFF Research Database (Denmark)

    Suravajhala, Prashanth; Burri, Harsha Vardhan Reddy; Heiskanen, Arto

    2014-01-01

    We present the potential role of aptamers in elucidating the function of hypothetical proteins, as well as the possibilities provided by bioinformatics for establishing a benchmark for aptamer-protein prediction methods. With these future perspectives, the role of hypothetical proteins as target ...... molecules for diagnostics and therapies could prove to be very useful in development of medical technology....

  6. Reactive Systems

    DEFF Research Database (Denmark)

    Aceto, Luca; Ingolfsdottir, Anna; Larsen, Kim Guldstrand

    A reactive system comprises networks of computing components, achieving their goals through interaction among themselves and their environment. Thus even relatively small systems may exhibit unexpectedly complex behaviours. As moreover reactive systems are often used in safety critical systems......, the need for mathematically based formal methodology is increasingly important. There are many books that look at particular methodologies for such systems. This book offers a more balanced introduction for graduate students and describes the various approaches, their strengths and weaknesses, and when...... they are best used. Milner's CCS and its operational semantics are introduced, together with the notions of behavioural equivalences based on bisimulation techniques and with recursive extensions of Hennessy-Milner logic. In the second part of the book, the presented theories are extended to take timing issues...

  7. Thermal characterization of organic matter along a (hypothetical) coalification gradient

    Science.gov (United States)

    Cavallo, Ornella; Provenzano, Maria Rosaria; Zaccone, Claudio

    2017-04-01

    Geochemical transformations of organic carbon (C) in aquatic and terrestrial ecosystems are important starting points for genesis of peats, brown coals and other coal precursors. The humification process plays a key role in biogeochemical transformations of organic C and, as a result, in the first stages of coal precursors formation. Thermal analysis was used by Schnitzer and other scientists since 1950-1960s, in order to investigate the stability of several organic materials of industrial value including peat and coal. What soil scientists found was the general occurrence of two exothermic peaks (exotherm 1 and 2) due to decomposition and combustion reactions of organic compounds having different thermal stability and, consequently, different degree of humification. Thermogravimetric analysis (TG) was carried out on different samples reproducing a "hypothetical" coalification gradient as follows: peat (IHSS Pahokee peat standard), fulvic acid (FA), a peat humic acid (HA), leonardite (IHSS Gascoyne standard) and charcoal. An aliquot of about 20 mg of each sample was heated in a ceramic crucible from 50 to 850˚ C at 30˚ C min-1, at a gas flow rate of 30 mL min-1 using a PerkinElmer TGA4000 thermobalance. Samples were analysed both under nitrogen and under synthetic air. All analyses were carried out in triplicate and the average coefficient of variation was bio-transformation of organic materials. Finally, the temperature at which half of the exothermic mass loss has occurred (TG-T50) was also calculated. Preliminary results obtained from TG analysis under air showed that WL2/WL1 ratio was lower for the FA sample and higher for leonardite and charcoal, following the order FA

  8. Emergency measures following hypothetical actions against nuclear facilities in Italy

    International Nuclear Information System (INIS)

    Rogani, A.; Tabet, E.

    2003-01-01

    Full text: After the Chernobyl accident a national emergency plan of protective measures for radiological emergencies has been set up in Italy to cope with nuclear risks which require actions at national level. Since most of the Italian nuclear installations are, at present, not operational, the most relevant nuclear risk sources identified in the national emergency plan stem from accidents in nuclear power plants near the Italian borders or aboard nuclearpropelled ships, or events related to the fall of nuclear-powered satellites and transportation of radioactive materials. The plan identifies a reference scenario for nation-wide emergency interventions and the proper structures to be involved in the radiological emergency. However, risks related to nuclear terrorism are not taken into account in the plan, whereas nuclear plants as well as nuclear materials and sources (in use in medical, scientific and industrial applications) are known to represent potential targets for hostile acts, potentially giving rise to harmful radioactive releases into the atmosphere. Along with four nuclear power plants, now undergoing a decommissioning procedure, several other nuclear facilities, such as provisional radioactive waste deposits or research centers, are present in Italy. Unfortunately not all of the radioactive waste inventory is conditioned in such a way to make a spread of radioactive contamination, as a consequence of a hostile action, unlikely; moreover, spent fuel elements are still kept, in some cases, inside the plant spent fuel storage pool. In this paper the hypothetical radiological impact of deliberate actions against some reference nuclear installations will be evaluated, together with its amplications for an appropriate profiling of the emergency countermeasures which could be required. Especially the case of a terrorism act against a spent fuel storage pool is worked out in some detail, as this event appears to be one of those with the most severe

  9. BOLD responses in reward regions to hypothetical and imaginary monetary rewards.

    Science.gov (United States)

    Miyapuram, Krishna P; Tobler, Philippe N; Gregorios-Pippas, Lucy; Schultz, Wolfram

    2012-01-16

    Monetary rewards are uniquely human. Because money is easy to quantify and present visually, it is the reward of choice for most fMRI studies, even though it cannot be handed over to participants inside the scanner. A typical fMRI study requires hundreds of trials and thus small amounts of monetary rewards per trial (e.g. 5p) if all trials are to be treated equally. However, small payoffs can have detrimental effects on performance due to their limited buying power. Hypothetical monetary rewards can overcome the limitations of smaller monetary rewards but it is less well known whether predictors of hypothetical rewards activate reward regions. In two experiments, visual stimuli were associated with hypothetical monetary rewards. In Experiment 1, we used stimuli predicting either visually presented or imagined hypothetical monetary rewards, together with non-rewarding control pictures. Activations to reward predictive stimuli occurred in reward regions, namely the medial orbitofrontal cortex and midbrain. In Experiment 2, we parametrically varied the amount of visually presented hypothetical monetary reward keeping constant the amount of actually received reward. Graded activation in midbrain was observed to stimuli predicting increasing hypothetical rewards. The results demonstrate the efficacy of using hypothetical monetary rewards in fMRI studies. Copyright © 2011 Elsevier Inc. All rights reserved.

  10. Thyroid disorders in patients with newly diagnosed rheumatoid arthritis is associated with poor initial treatment response evaluated by disease activity score in 28 joints-C-reactive protein (DAS28-CRP)

    DEFF Research Database (Denmark)

    Emamifar, Amir; Hangaard, Jørgen; Jensen Hansen, Inger Marie

    2017-01-01

    peptide antibody (anti-CCP), and antinuclear antibody (ANA), and also disease activity score in 28 joints-C-reactive protein at the time of diagnosis and after 4 months (±1–2 months) of treatment initiation were extracted from Danish Danbio Registry. Patients’ electronic hospital records for the past 10...... years were reviewed to reveal if they had been diagnosed with thyroid disorders or they had abnormal thyroid test.In all, 439 patients were included, female 60.1%, mean age 64.6 ± 15.0 years and disease duration 2.6 ± 1.7 years. Prevalence of thyroid disorders was 69/439 (15.7%) and hypothyroidism...... treatment compared with patients with isolated RA after 4 months of treatment (P = .02). There were no associations between thyroid disorders and age, disease duration, and also IgM RF positivity.Presence of thyroid disorders in RA patients is suggestive of a more aggressive disease and poor outcome...

  11. 10 CFR 71.73 - Hypothetical accident conditions.

    Science.gov (United States)

    2010-01-01

    ... of materials of construction, must be allowed to proceed until it terminates naturally. (5) Immersion... initial internal pressure within the containment system must be the maximum normal operating pressure... steel plate 1 m (40 in) by 1 m (40 in) and must fall in a horizontal attitude. The crush test is...

  12. Application of a safety assessment methodology to a hypothetical surface disposal at Serpong site, Indonesia

    International Nuclear Information System (INIS)

    Lubis, E.; Mallants, D.; Volckaert, G.; Marivoet, J.; Neerdael, B.

    2000-01-01

    A preliminary and generic safety assessment of a candidate shallow land burial (SLB) repository at Serpong site, Indonesia, has been performed. The step-by-step safety assessment methodology included an analysis of features, events, and processes (FEPs), and mathematical modelling of radionuclide migration in the near field, geosphere and biosphere. On the basis of an extensive FEP catalogue the most relevant scenarios to be considered in the consequence analysis were selected. Both the normal evolution scenario (NES) and the alternative scenarios were identified. On the basis of these scenarios a conceptual model that included all the important physical-chemical processes was built for the near field and geosphere. A two-dimensional numerical model was then used to solve the governing flow and transport equations for appropriate initial and boundary conditions. The calculations were performed using a repository-specific value for the total disposed activity in combination with hypothetical values for radionuclide composition based on a typical radionuclide content of low level waste in Belgium. Site-specific data on hydrogeological properties were used for the geosphere calculations. Typical results of the consequence analysis in terms of radionuclide fluxes to the geosphere and radionuclide concentrations in the groundwater are discussed. (author)

  13. Preliminary crystallographic analysis of two hypothetical ribose-5-phosphate isomerases from Streptococcus mutans

    International Nuclear Information System (INIS)

    Wang, Chen; Fan, Xuexin; Cao, Xiaofang; Liu, Xiang; Li, Lanfen; Su, Xiaodong

    2012-01-01

    Two hypothetical ribose-5-phosphate isomerases from S. mutans have been produced in E. coli and crystallized. The crystals diffracted to high resolutions suitable for crystallographic analyses. Study of the enzymes from sugar metabolic pathways may provide a better understanding of the pathogenesis of the human oral pathogen Streptococcus mutans. Bioinformatics, biochemical and crystallization methods were used to characterize and understand the function of two putative ribose-5-phosphate isomerases: SMU1234 and SMU2142. The proteins were cloned and constructed with N-terminal His tags. Protein purification was performed by Ni 2+ -chelating and size-exclusion chromatography. The crystals of SUM1234 diffracted to 1.9 Å resolution and belonged to space group P2 1 2 1 2 1 , with unit-cell parameters a = 48.97, b = 98.27, c = 101.09 Å, α = β = γ = 90°. The optimized SMU2142 crystals diffracted to 2.7 Å resolution and belonged to space group P1, with unit-cell parameters a = 53.7, b = 54.1, c = 86.5 Å, α = 74.2, β = 73.5, γ = 83.7°. Initial phasing of both proteins was attempted by molecular replacement; the structure of SMU1234 could easily be solved, but no useful results were obtained for SMU2142. Therefore, SeMet-labelled SMU2142 will be prepared for phasing

  14. Hypothetical physicochemical mechanisms of some intracellular processes: The hydrate hypothesis of mitosis and DNA replication

    International Nuclear Information System (INIS)

    Kadyshevich, E.A.; Ostrovskii, V.E.

    2007-01-01

    A DNA replication, mitosis, and binary fission hydrate hypothesis (MRH hypothesis) allowing non-trivial explanations for the physicochemical mechanisms of some intracellular processes is proposed. The hypothesis has a thermodynamic basis and is initiated by original experimental calorimetric and kinetic studies of the behavior of functional organic polymer and monomer substances in highly concentrated aqueous solutions. Experimental data demonstrating the occurrence of a short-range ordering in concentrated aqueous solutions of such substances are included. Hypothetical simple non-enzymatic unified mechanisms for the natural processes of DNA local unwinding preceding the start of duplication, DNA replication, formation and disappearance of the protein bonds between sister chromatids in the centromere region of eukaryotic DNA and in the centromere-like region of prokaryotic DNA, moving of daughter chromosomes apart to the opposite sides of cells in late anaphase, and formation of the nuclear envelopes in telophase and intracellular membranes between the newly formed nuclei in cytokinesis are formulated. The nature of a number of other intracellular phenomena is discussed

  15. C-Reactive Protein (CRP), Interferon Gamma-Inducible Protein 10 (IP-10), and Lipopolysaccharide (LPS) Are Associated with Risk of Tuberculosis after Initiation of Antiretroviral Therapy in Resource-Limited Settings

    Science.gov (United States)

    Tenforde, Mark W.; Gupte, Nikhil; Dowdy, David W.; Asmuth, David M.; Balagopal, Ashwin; Pollard, Richard B.; Sugandhavesa, Patcharaphan; Lama, Javier R.; Pillay, Sandy; Cardoso, Sandra W.; Pawar, Jyoti; Santos, Breno; Riviere, Cynthia; Mwelase, Noluthando; Kanyama, Cecilia; Kumwenda, Johnstone; Hakim, James G.; Kumarasamy, Nagalingeswaran; Bollinger, Robert; Semba, Richard D.; Campbell, Thomas B.; Gupta, Amita

    2015-01-01

    Objective The association between pre-antiretroviral (ART) inflammation and immune activation and risk for incident tuberculosis (TB) after ART initiation among adults is uncertain. Design Nested case-control study (n = 332) within ACTG PEARLS trial of three ART regimens among 1571 HIV-infected, treatment-naïve adults in 9 countries. We compared cases (participants with incident TB diagnosed by 96 weeks) to a random sample of controls (participants who did not develop TB, stratified by country and treatment arm). Methods We measured pre-ART C-reactive protein (CRP), EndoCab IgM, ferritin, interferon gamma (IFN-γ), interleukin 6 (IL-6), interferon gamma-inducible protein 10 (IP-10), lipopolysaccharide (LPS), soluble CD14 (sCD14), tumor necrosis factor alpha (TNF-α), and CD4/DR+/38+ and CD8/DR+/38+ T cells. Markers were defined according to established cutoff definitions when available, 75th percentile of measured values when not, and detectable versus undetectable for LPS. Using logistic regression, we measured associations between biomarkers and incident TB, adjusting for age, sex, study site, treatment arm, baseline CD4 and log10 viral load. We assessed the discriminatory value of biomarkers using receiver operating characteristic (ROC) analysis. Results Seventy-seven persons (4.9%) developed incident TB during follow-up. Elevated baseline CRP (aOR 3.25, 95% CI: 1.55–6.81) and IP-10 (aOR 1.89, 95% CI: 1.05–3.39), detectable plasma LPS (aOR 2.39, 95% CI: 1.13–5.06), and the established TB risk factors anemia and hypoalbuminemia were independently associated with incident TB. In ROC analysis, CRP, albumin, and LPS improved discrimination only modestly for TB risk when added to baseline routine patient characteristics including CD4 count, body mass index, and prior TB. Conclusion Incident TB occurs commonly after ART initiation. Although associated with higher post-ART TB risk, baseline CRP, IP-10, and LPS add limited value to routine patient characteristics

  16. [Science in the crosshairs of enlightenment. Significance of hypothetical thinking].

    Science.gov (United States)

    Wieland, Wolfgang

    2011-01-01

    To further the enlightenment primarily or even only by means of science was the hope of most representatives of the movement of the enlightenment which gave its name to a whole period of European cultural history. Only a few of its representatives, like Montesquieu and Rousseau, doubted for good reasons, whether and how the goals of the enlightenment can be reached at all by the means of science alone. In his Discours préliminaires to the Encyclopédie D'Alembert still wanted to limit science proper to the narrower field of those kinds of research which were strictly based on observations and calculations alone. In this way he remained committed to Descartes' ideal method of receiving authentic knowledge only by deduction from evident axioms or fundamental theorems. Pascal's casual discovery of the calculation of probabilities allowed to apply mathematics on the hidden laws of the apparent casualties of the human life world. Bacon's project of empirical science as a rational and methodological art of conducting experiments could replace the methodological ideal of science more geometrico. Lichtenberg's refined sensibility for the subjunctive linguistic forms of hypothetical thinking indicates a new understanding of inventing and testing hypotheses as the two most important methods of the experimental sciences when compared to the formal sciences of logic and mathematics. Whoever is studying the history of science of modern times in the cross wire of the enlightenment, will realize soon that science has always been in need of being illuminated about its own chances, risks and side effects. The project of enlightenment through science had to be complemented by the project of an enlightenment about science right from its beginning. Because of the implicit risks and side effects the project of enlightenment has to be enlightenment despite of science and because of science. On the one hand, as a special form of human practice the sciences are directed towards

  17. Analysis of hypothetical LMFBR whole-core accidents in the USA

    International Nuclear Information System (INIS)

    Ferguson, D.R.; Deitrich, L.W.; Brown, N.W.; Waltar, A.E.

    1978-01-01

    Methods used for analysis of material behaviour, accident phenomenology and integrated accident calculations are reviewed. Applications of these methods to hypothetical LOF and TOP accidents are discussed. Recent results obtained from applications to FFTF and CRBRP are presented. (author)

  18. An approach for estimating the radiological significance of a hypothetical major nuclear accident over long distance transboundary scales

    Energy Technology Data Exchange (ETDEWEB)

    Mitrakos, D., E-mail: dimitris.mitrakos@eeae.gr; Potiriadis, C.; Housiadas, C.

    2016-04-15

    Highlights: • Actions may be warranted after a major nuclear accident even at long distances. • Distance may not be the decisive parameter for longer term radiological impact. • Remote impact may vary orders of magnitude depending on the meteorological conditions. • The potential impact can be assessed using computationally inexpensive calculations. - Abstract: After the Fukushima accident important initiatives were taken in European level to enhance the nuclear safety level of the existing and planned nuclear reactors, such as the so-called nuclear “stress-tests” and the amendment of the Nuclear Safety Directive. A recent work of HERCA and WENRA focused on the need for a more consistent and harmonized response in a transboundary context in case of a hypothetical major nuclear accident in Europe. Such an accident, although very improbable, cannot be totally excluded and so, should be considered in emergency preparedness arrangements among the various European countries. In case of a hypothetical severe Fukushima-like accident in Europe, the role of the neighboring countries may be important, since the authorities should be able to provide information and advice to the government and the public, but also can contribute to the overall assessment of the situation be their own means. In this work we assess the radiological significance of a hypothetical major nuclear accident for distances longer than 300 km that are not typically covered by the internationally accepted emergency planning zones. The approach is simple and computationally inexpensive, since it is based on the calculation of only a few release scenarios at dates selected within a whole year on the basis of bounding the deposition levels at long distances in relation to the occurrence of precipitation. From the calculated results it is evident that distance is not the only decisive parameter in estimating the potential radiological significance of a severe nuclear accident. The hypothetical

  19. Soil carbon sequestration, carbon markets, and conservation agriculture practices: A hypothetical examination in Mozambique

    Directory of Open Access Journals (Sweden)

    Timoteo E. Simone

    2017-09-01

    Full Text Available Payments for Environmental Services (PES are relatively novel mechanisms whereby the adoption of sustainable management practices by a stakeholder is rewarded by incentives linked to external markets. Adoption of PES for conservation agricultural practices (CAPS by smallholder farmers may provide opportunities to increase household income or cover the technology costs of adoption if the carbon sequestration benefits of CAPS are quantifiable, adoption rates are accelerated and maintained, a mechanism exists whereby carbon sequestration services can be compensated, and carbon offset exchange markets are viable. This research suggests a methodology to examine a PES market for carbon offsets generated by the adoption of CAPS by farmers in Mozambique. Assuming a cumulative adoption of 60% over a 20-year period, revenue from PES market participation to CA adopters was two times higher than revenue earned when disadoption occurred midway through the simulation. Lower adoption targets are associated with higher per household returns when fertilizer rates typical to the region are increased. Establishing and maintaining a sustainable PES system in the study region would require significant investment in time and resources. The lack of on-the-ground institutions or local support for such a program would also challenge successful implementation. Finally, the programs where participant success depends on external markets, such as the hypothetical one suggested here, are subject to the ebb and flow of foreign demand for carbon offsets. Addressing these three broad constraints to a PES/CAPS program in the region would require grass-roots driven policy initiatives with buy-in at multiple social, economic, and political levels.

  20. Radiation doses estimation for hypothetical NPP Krsko accidents without and with PCFV using RASCAL software

    International Nuclear Information System (INIS)

    Vukovic, Josip; Konjarek, Damir; Grgic, Davor

    2014-01-01

    Calculation is done using Source Term to Dose module of RASCAL (Radiological Assessment System Consequence Analysis) software to estimate projected radiation doses from a radioactive plume to the environment. Utilizing this module, it is possible to do preliminary assessment of consequences to the environment in case of adverse reactor conditions or releases from other objects containing radioactive materials before the emergency situation has happened or in the early phase. RASCAL is simple, easy to use, fast-running tool able to provide initial estimate of radiological consequences of nuclear accidents. Upon entering rather limited amount of input parameters for the Krsko NPP, mostly key plant parameters, time dependent source term calculation is executed to determine radioactive inventory release rates for different plant conditions, release paths and availability of protective measures. These rates given for each radionuclide as a function of time are used as an input to atmospheric dispersion and transport model. Together with release rates, meteorological conditions dataset serve as input to determine the behavior of the radioactive releases that is plume in the atmosphere. So as an output, RASCAL produces a 'dispersion envelope' of radionuclide concentrations in the atmosphere. These concentrations of radionuclides in the atmosphere are further used for estimating the doses to the environment and the public downwind the release point. Throughout this paper, dose assessment is performed for two distances, close-in distance and distance out to 40 km from the source, for hypothetical NPP Krsko accidents without and with Passive Containment Filtered Vent (PCFV) system used. Obvious difference is related to released radioactivity of Iodine isotopes. Results of radioactive effluents deposition in the environment are displayed via various doze parameters, radionuclide concentrations and materials exposure rates in this particular case. (authors)

  1. The reactivity meter and core reactivity

    International Nuclear Information System (INIS)

    Siltanen, P.

    1999-01-01

    This paper discussed in depth the point kinetic equations and the characteristics of the point kinetic reactivity meter, particularly for large negative reactivities. From a given input signal representing the neutron flux seen by a detector, the meter computes a value of reactivity in dollars (ρ/β), based on inverse point kinetics. The prompt jump point of view is emphasised. (Author)

  2. Expression profiling of hypothetical genes in Desulfovibrio vulgaris leads to improved functional annotation

    Energy Technology Data Exchange (ETDEWEB)

    Elias, Dwayne A.; Mukhopadhyay, Aindrila; Joachimiak, Marcin P.; Drury, Elliott C.; Redding, Alyssa M.; Yen, Huei-Che B.; Fields, Matthew W.; Hazen, Terry C.; Arkin, Adam P.; Keasling, Jay D.; Wall, Judy D.

    2008-10-27

    Hypothetical and conserved hypothetical genes account for>30percent of sequenced bacterial genomes. For the sulfate-reducing bacterium Desulfovibrio vulgaris Hildenborough, 347 of the 3634 genes were annotated as conserved hypothetical (9.5percent) along with 887 hypothetical genes (24.4percent). Given the large fraction of the genome, it is plausible that some of these genes serve critical cellular roles. The study goals were to determine which genes were expressed and provide a more functionally based annotation. To accomplish this, expression profiles of 1234 hypothetical and conserved genes were used from transcriptomic datasets of 11 environmental stresses, complemented with shotgun LC-MS/MS and AMT tag proteomic data. Genes were divided into putatively polycistronic operons and those predicted to be monocistronic, then classified by basal expression levels and grouped according to changes in expression for one or multiple stresses. 1212 of these genes were transcribed with 786 producing detectable proteins. There was no evidence for expression of 17 predicted genes. Except for the latter, monocistronic gene annotation was expanded using the above criteria along with matching Clusters of Orthologous Groups. Polycistronic genes were annotated in the same manner with inferences from their proximity to more confidently annotated genes. Two targeted deletion mutants were used as test cases to determine the relevance of the inferred functional annotations.

  3. Further evidence of close correspondence for alcohol demand decision making for hypothetical and incentivized rewards.

    Science.gov (United States)

    Amlung, Michael; MacKillop, James

    2015-04-01

    Alcohol purchase tasks (APTs) are increasingly being used to assess behavioral economic demand for alcohol. Prior studies utilizing APTs have typically assessed demand for hypothetical outcomes, making the extent to which these hypothetical measures reflect preferences when actual rewards are at stake an important empirical question. This study examined alcohol demand across hypothetical and incentivized APTs. Nineteen male heavy drinkers completed two APTs - one for hypothetical alcohol and another in which one randomly-selected outcome was provided. Participants were given an opportunity to consume the alcohol associated with their choice on the incentivized APT during a self-administration period in a simulated bar environment. Results indicated generally close correspondence between APT versions, though participants were more sensitive to increases in price and tended to consume more at low prices on the incentivized version. Estimated consumption on the incentivized APT was highly correlated with the amount of alcohol consumed in the laboratory (r=.87, pdecision-making when rewards are hypothetical vs. actually available. Implications for behavioral economic approaches to addictive behavior and directions for future research are discussed. Copyright © 2015 Elsevier B.V. All rights reserved.

  4. In-vessel natural circulation during a hypothetical loss-of-heat-sink accident in the Fast Flux Test Facility

    International Nuclear Information System (INIS)

    Perkins, K.R.; Bari, R.A.; Pratt, W.T.

    1979-05-01

    The capability to remove decay heat from the FFTF core via in-vessel natural circulation has been analyzed for the preboiling phase using a lumped parameter model. The results indicate that boiling will occur in the average fuel assembly for a wide spectrum of initial conditions which appear to be representative of the hypothetical loss-of-heat-sink accident. Two-phase pressure drop calculations indicate that, once the saturation temperature is reached, coolability can only be assured for decay heat levels which are less than 0.5% of the operating power. A review of the limited sodium boiling data indicates that boiling-induced natural circulation may support up to 4% of the operating power, but geometric atypicalities and a large degree of inlet subcooling for the existing data limit the applicability to the loss-of-heat-sink accident in FFTF

  5. What we say and what we do: the relationship between real and hypothetical moral choices.

    Science.gov (United States)

    FeldmanHall, Oriel; Mobbs, Dean; Evans, Davy; Hiscox, Lucy; Navrady, Lauren; Dalgleish, Tim

    2012-06-01

    Moral ideals are strongly ingrained within society and individuals alike, but actual moral choices are profoundly influenced by tangible rewards and consequences. Across two studies we show that real moral decisions can dramatically contradict moral choices made in hypothetical scenarios (Study 1). However, by systematically enhancing the contextual information available to subjects when addressing a hypothetical moral problem-thereby reducing the opportunity for mental simulation-we were able to incrementally bring subjects' responses in line with their moral behaviour in real situations (Study 2). These results imply that previous work relying mainly on decontextualized hypothetical scenarios may not accurately reflect moral decisions in everyday life. The findings also shed light on contextual factors that can alter how moral decisions are made, such as the salience of a personal gain. Copyright © 2012 Elsevier B.V. All rights reserved.

  6. Differences in Behavior and Brain Activity during Hypothetical and Real Choices.

    Science.gov (United States)

    Camerer, Colin; Mobbs, Dean

    2017-01-01

    Real behaviors are binding consequential commitments to a course of action, such as harming another person, buying an Apple watch, or fleeing from danger. Cognitive scientists are generally interested in the psychological and neural processes that cause such real behavior. However, for practical reasons, many scientific studies measure behavior using only hypothetical or imagined stimuli. Generalizing from such studies to real behavior implicitly assumes that the processes underlying the two types of behavior are similar. We review evidence of similarity and differences in hypothetical and real mental processes. In many cases, hypothetical choice tasks give an incomplete picture of brain circuitry that is active during real choice. Copyright © 2016. Published by Elsevier Ltd.

  7. Identification of the conserved hypothetical protein BPSL0317 in Burkholderia pseudomallei K96243

    Science.gov (United States)

    Yusoff, Nur Syamimi; Damiri, Nadzirah; Firdaus-Raih, Mohd

    2014-09-01

    Burkholderia pseudomallei K96243 is the causative agent of melioidosis, a disease which is endemic in Northern Australia and Southeastern Asia. The genome encodes several essential proteins including those currently annotated as hypothetical proteins. We studied the conservation and the essentiality of expressed hypothetical proteins in normal and different stress conditions. Based on the comparative genomics, we identified a hypothetical protein, BPSL0317, a potential essential gene that is being expressed in all normal and stress conditions. BPSL0317 is also phylogenetically conserved in the Burkholderiales order suggesting that this protein is crucial for survival among the order's members. BPSL0317 therefore has a potential to be a candidate antimicrobial drug target for this group of bacteria.

  8. Optimization of binary breeder reactor. 1. Sodium void reactivity and Doppler effect in a new model

    International Nuclear Information System (INIS)

    Nascimento, J.A. do; Dias, A.F.; Ishiguro, Y.

    1985-01-01

    A model for the Binary Breeder Reactor (BBR) is examined for the inherent safety characteristics, sodium void reactivity and Doppler effect in the beginning of cycle and a hypothetical end of cycle. In addition to the standard fueling mode of the BBR, two others are considered: U 238 /U 233 -alternate fueling, and U 238 /PU-normal fueling of LMFBRs. (Author) [pt

  9. ATHENA2D, Simulation Hypothetical Recriticality Accident in a Thermal Neutron Spectrum

    International Nuclear Information System (INIS)

    1999-01-01

    1 - Description of program or function: ATHENA 2 D was written to simulate a hypothetical water reflood of a highly-damaged light water reactor (such as the Three-Mile-Island Unit-2 after meltdown, with a packed debris bed near the center of the core), but with insufficiently-borated reflood water. A recriticality transient may result because of the potentially more reactive debris bed. ATHENA-2D solves the transient multigroup neutron diffusion equations in (r,z) geometry. Executing in parallel with the transient neutronics, is a single-phase computational fluid dynamics (CFD) model, driven by multichannel thermal hydraulics based on detailed pin models. Numerous PV-Wave procedure files are included on the distribution media, useful for those who already have PV-Wave from Visual Numerics. These procedures are documented in the 'README' files included on the distribution CD. Some reactor lattice computer code such as WIMS-E, CCC-576/WIMSD4, or CCC-656/WIMSD5B is required for the creation of macroscopic cross section libraries, given pin-cell geometries. WIMS-E is a commercial product available from AEA Technologies, England, WIMS is not included on the ATHENA 2 D distribution CD. Several auxiliary routines are included in the package. TFMAX: Utility that searches through ATHENA 2 D binary output to find the maximum fuel temperature over space and time. POST V EL: Utility that searches through ATHENA 2 D binary output to find maximum scalar and flow field values (over space) and outputs normalization factors as a function of time. These results are used to correctly scale animations. CONVT: If executing ATHENA 2 D on a PC under Windows, this utility converts one form of binary output (directly from ATHENA 2 D) to another, which is readable by PV-Wave for Windows (PV-Wave is data animation and visualization software from Visual Numerics, Inc.) CALC M TX: Post-processing utility for calculating the model coefficients for the calculation matrix. 2 - Methods: Both the

  10. Physicians' willingness to grant requests for assistance in dying for children: a study of hypothetical cases

    NARCIS (Netherlands)

    Vrakking, A.M.; Heide, van der A.; Looman, C.W.; Delden, van J.J.M.; Philipsen, B.D.; Maas, van der P.J.; Wal, van der G.

    2005-01-01

    OBJECTIVE: To study the willingness of Dutch physicians to use potentially life-shortening or lethal drugs for severely ill children. STUDY DESIGN: We asked 63 pediatricians about their approach to 10 hypothetical cases of children with cancer. The age of the child (15, 11, or 6 years), the child's

  11. Bioinformatics and structural characterization of a hypothetical protein from Streptococcus mutans

    DEFF Research Database (Denmark)

    Nan, Jie; Brostromer, Erik; Liu, Xiang-Yu

    2009-01-01

    . From the interlinking structural and bioinformatics studies, we have concluded that SMU.440 could be involved in polyketide-like antibiotic resistance, providing a better understanding of this hypothetical protein. Besides, the combination of multiple methods in this study can be used as a general...

  12. An Assessment of the Hypothetical Impact of Drug Abuse on Combat Capability. Volume I.

    Science.gov (United States)

    1979-12-01

    25 I .4 Jill 1.6 MICROCOPY RESOLUTION TEST CHART NATIONAt BIURIA OF gMANI£ IWOI) A LEVEL AD SAI-80-113-WA AN ASSESSMENT OF THE HYPOTHETICAL IMPACTo OF...potential loss of unit effectiveness in each of these units. The resulting measure of unit effectiveness provides a powerful analy- tic tool for comparing

  13. Consequences in Norway after a hypothetical accident at Sellafield - Predicted impacts on the environment.

    Energy Technology Data Exchange (ETDEWEB)

    Thoerring, H.; Liland, A.

    2010-12-15

    This report deals with the environmental consequences in Norway after a hypothetical accident at Sellafield. The investigation is limited to the terrestrial environment, and focus on animals grazing natural pastures, plus wild berries and fungi. Only 137Cs is considered. The predicted consequences are severe, in particular for mutton and goat milk production. (Author)

  14. Can a Repeated Opt-Out Reminder mitigate hypothetical bias in discrete choice experiments?

    DEFF Research Database (Denmark)

    Alemu, Mohammed Hussen; Olsen, Søren Bøye

    2018-01-01

    In this paper, we test whether a Repeated Opt-Out Reminder (ROOR) can mitigate hypothetical bias in stated discrete choice experiments (DCE). The data originate from a field experiment concerning consumer preferences for a novel food product made from cricket flour. Utilising a between...

  15. The impact of arbitrarily applicable relational responding on evaluative learning about hypothetical money and shock outcomes.

    Science.gov (United States)

    Dymond, Simon; Molet, Mikael; Davies, Lynette

    2017-08-01

    Evaluative learning comprises changes in preferences after co-occurrences between conditioned stimuli (CSs) and an unconditioned stimulus (US) of affective value. Co-occurrences may involve relational responding. Two experiments examined the impact of arbitrary relational responding on evaluative preferences for hypothetical money and shock outcomes. In Experiment 1, participants were trained to make arbitrary relational responses by placing CSs of the same size but different colours into boxes and were then instructed that these CSs represented different intensities of hypothetical USs (money or shock). Liking ratings of the CSs were altered in accordance with the underlying bigger/smaller than relations. A reversal of preference was also observed: the CS associated with the smallest hypothetical shock was rated more positively than the CS associated with the smallest amount of hypothetical money. In Experiment 2, procedures from Relational Frame Theory (RFT) established a relational network of more than/less than relations consisting of five CSs (A-B-C-D-E). Overall, evaluative preferences were altered, but not reversed, depending on (a) how stimuli had been related to one another during the learning phase and (b) whether those stimuli referred to money or shocks. The contribution of RFT to evaluative learning research is discussed.

  16. study and analysis of asa river hypothetical dam break using hec-ras

    African Journals Online (AJOL)

    Impounded reservoirs provide beneficial functions such as flood control, recreation, hydropower and water supply but they also carry potential risks. Spontaneous dam break phenomenon can occur and the resultant flooding may cause substantial loss of life and property damage downstream of the dam. A hypothetical dam ...

  17. Consequences in Norway after a hypothetical accident at Sellafield - Predicted impacts on the environment

    International Nuclear Information System (INIS)

    Thoerring, H.; Liland, A.

    2010-12-01

    This report deals with the environmental consequences in Norway after a hypothetical accident at Sellafield. The investigation is limited to the terrestrial environment, and focus on animals grazing natural pastures, plus wild berries and fungi. Only 137Cs is considered. The predicted consequences are severe - in particular for mutton and goat milk production. (Author)

  18. Massive florid reactive periostitis

    International Nuclear Information System (INIS)

    Nance, K.V.; Renner, J.B.; Brashear, H.R.; Siegal, G.P.; North Carolina Univ., Chapel Hill, NC

    1990-01-01

    Florid reactive periostitis is a rare, benign process usually occurring in the small, tubular bones of the hands and feet. Typically the lesion occurs in an adolescent or young adult and presents as a small area of pain and erythema over the affected bone. Although the histologic features may suggest malignancy, there is usually little radiographic evidence to support such a diagnosis. In the following report an unusual example of this entity is described whose large size and relentless local progression led to initial diagnostic uncertainty and eventual aggressive management. This case suggests that a wide spectrum of radiologic and morphologic changes may be seen in this entity and that a seemingly unrelated genetic disease may alter the typical clinical course. (orig.)

  19. Radioactive dispersion analysis for hypothetical nuclear power plant (NPP) candidate site in Perak state, Malaysia

    Science.gov (United States)

    Shamsuddin, Shazmeen Daniar; Basri, Nor Afifah; Omar, Nurlyana; Koh, Meng-Hock; Ramli, Ahmad Termizi; Saridan Wan Hassan, Wan Muhamad

    2017-10-01

    Malaysia is planning to build a nuclear power plant (NPP) by 2030 to diversify the national electricity supply and resources. Selection of an NPP site must consider various factors, especially nuclear safety consideration to fulfil the nuclear safety objectives. Environmental Risk Assessment Analysis is a part of safety requirements by the International Atomic Energy Agency (IAEA) prior to the NPP commissioning process. Risk Assessments Analysis (RIA) is compulsory for the NPP site evaluation. One of RIA methods are Radioactive Dispersion Analysis using probabilistic risk analysis software. It is also important to perform studies to estimate the impact to the neighbouring population in the case of a nuclear accident at the power plant. In the present work, aimed to study the impact of a hypothetical nuclear accident by simulating the dispersion pattern of radionuclides originated from a candidate site at Manjung, Perak. The work has been performed using the HotSpot Health Physics codes. Two types of radionuclides have been considered namely 137Cs and 131I. In calculations, the initial concentration of radioactive materials of Fukushima Daiichi accident data are used which are 2.06 x 1016 Bq and 1.68 x 1017 Bq respectively for the two radionuclides. The result shows that the dispersion distance obtained from both software are not the same. It shows that 137Cs and 131I can be dispersed as far as 16 km and 80 km away from the site during radiological accident respectively, reaching major towns in Perak. Using HOTSPOT, the estimated total effective dose equivalent (TEDE) for 137Cs and 131I at major towns in Perak such as Lumut and Sitiawan are 1.2 mSv and 9.9 mSv. As for Taiping, Ipoh, Kampar, and Teluk Intan the estimated TEDE is around 0.2 mSv and 1.6 mSv respectively. In conclusion, the dispersion can reach as far as 80 km from the site. However, estimated annual effective dose is not more than 1 mSv limit, which is considered acceptable in the point of view of

  20. Radioactive dispersion analysis for hypothetical nuclear power plant (NPP candidate site in Perak state, Malaysia

    Directory of Open Access Journals (Sweden)

    Shamsuddin Shazmeen Daniar

    2017-01-01

    Full Text Available Malaysia is planning to build a nuclear power plant (NPP by 2030 to diversify the national electricity supply and resources. Selection of an NPP site must consider various factors, especially nuclear safety consideration to fulfil the nuclear safety objectives. Environmental Risk Assessment Analysis is a part of safety requirements by the International Atomic Energy Agency (IAEA prior to the NPP commissioning process. Risk Assessments Analysis (RIA is compulsory for the NPP site evaluation. One of RIA methods are Radioactive Dispersion Analysis using probabilistic risk analysis software. It is also important to perform studies to estimate the impact to the neighbouring population in the case of a nuclear accident at the power plant. In the present work, aimed to study the impact of a hypothetical nuclear accident by simulating the dispersion pattern of radionuclides originated from a candidate site at Manjung, Perak. The work has been performed using the HotSpot Health Physics codes. Two types of radionuclides have been considered namely 137Cs and 131I. In calculations, the initial concentration of radioactive materials of Fukushima Daiichi accident data are used which are 2.06 x 1016 Bq and 1.68 x 1017 Bq respectively for the two radionuclides. The result shows that the dispersion distance obtained from both software are not the same. It shows that 137Cs and 131I can be dispersed as far as 16 km and 80 km away from the site during radiological accident respectively, reaching major towns in Perak. Using HOTSPOT, the estimated total effective dose equivalent (TEDE for 137Cs and 131I at major towns in Perak such as Lumut and Sitiawan are 1.2 mSv and 9.9 mSv. As for Taiping, Ipoh, Kampar, and Teluk Intan the estimated TEDE is around 0.2 mSv and 1.6 mSv respectively. In conclusion, the dispersion can reach as far as 80 km from the site. However, estimated annual effective dose is not more than 1 mSv limit, which is considered acceptable in the point

  1. Estimating hypothetical present-day insured losses for past intense hurricanes in the French Antilles

    Science.gov (United States)

    Thornton, James; Desarthe, Jérémy; Naulin, Jean-Philippe; Garnier, Emmanuel; Liu, Ye; Moncoulon, David

    2015-04-01

    On the islands of the French Antilles, the period for which systematic meteorological measurements and historic event loss data are available is short relative to the recurrence intervals of very intense, damaging hurricanes. Additionally, the value of property at risk changes through time. As such, the recent past can only provide limited insight into potential losses from extreme storms in coming years. Here we present some research that seeks to overcome, as far as is possible, the limitations of record length in assessing the possible impacts of near-future hurricanes on insured properties. First, using the archives of the French overseas departments (which included administrative and weather reports, inventories of damage to houses, crops and trees, as well as some meteorological observations after 1950) we reconstructed the spatial patterns of hazard intensity associated with three historical events. They are: i) the 1928 Hurricane (Guadeloupe), ii) Hurricane Betsy (1956, Guadeloupe) and iii) Hurricane David (1979, Martinique). These events were selected because all were damaging, and the information available on each is rich. Then, using a recently developed catastrophe model for hurricanes affecting Guadeloupe, Martinique, Saint-Barthélemy and Saint-Martin, we simulated the hypothetical losses to insured properties that the reconstructed events might cause if they were to reoccur today. The model simulated damage due to wind, rainfall-induced flooding and storm surge flooding. These 'what if' scenarios provided an initial indication of the potential present-day exposure of the insurance industry to intense hurricanes. However, we acknowledge that historical events are unlikely to repeat exactly. We therefore extended the study by producing a stochastic event catalogue containing a large number of synthetic but plausible hurricane events. Instrumental data were used as a basis for event generation, but importantly the statistical methods we applied permit

  2. Reactive Kripke semantics

    CERN Document Server

    Gabbay, Dov M

    2013-01-01

    This text offers an extension to the traditional Kripke semantics for non-classical logics by adding the notion of reactivity. Reactive Kripke models change their accessibility relation as we progress in the evaluation process of formulas in the model. This feature makes the reactive Kripke semantics strictly stronger and more applicable than the traditional one. Here we investigate the properties and axiomatisations of this new and most effective semantics, and we offer a wide landscape of applications of the idea of reactivity. Applied topics include reactive automata, reactive grammars, rea

  3. Testing the effectiveness of certainty scales, cheap talk, and dissonance-minimization in reducing hypothetical bias in contingent valuation studies

    Science.gov (United States)

    Mark Morrison; Thomas C. Brown

    2009-01-01

    Stated preference methods such as contingent valuation and choice modeling are subject to various biases that may lead to differences between actual and hypothetical willingness to pay. Cheap talk, follow-up certainty scales, and dissonance minimization are three techniques for reducing this hypothetical bias. Cheap talk and certainty scales have received considerable...

  4. Reactive perforating collagenosis

    Directory of Open Access Journals (Sweden)

    Yadav Mukesh

    2009-01-01

    Full Text Available Reactive perforating collagenosis is a rare cutaneous disorder of unknown etiology. We hereby describe a case of acquired reactive perforating collagenosis in a patient of diabetes and chronic renal failure.

  5. Reactivity on the Web

    OpenAIRE

    Bailey, James; Bry, François; Eckert, Michael; Patrânjan, Paula Lavinia

    2005-01-01

    Reactivity, the ability to detect simple and composite events and respond in a timely manner, is an essential requirement in many present-day information systems. With the emergence of new, dynamic Web applications, reactivity on the Web is receiving increasing attention. Reactive Web-based systems need to detect and react not only to simple events but also to complex, real-life situations. This paper introduces XChange, a language for programming reactive behaviour on the Web,...

  6. Monadic Functional Reactive Programming

    NARCIS (Netherlands)

    A.J. van der Ploeg (Atze); C Shan

    2013-01-01

    htmlabstractFunctional Reactive Programming (FRP) is a way to program reactive systems in functional style, eliminating many of the problems that arise from imperative techniques. In this paper, we present an alternative FRP formulation that is based on the notion of a reactive computation: a

  7. Fuel assembly loads during a hypothetical blowdown event in a PWR

    International Nuclear Information System (INIS)

    Stabel, J.; Bosanyi, B.; Kim, J.D.

    1991-01-01

    As a consequence of a hypothetical sudden break of the main coolant pipe of a PWR, RPV-internals and fuel assemblies (FA's) are undergoing horizontal and vertical motions. FA's may impact against each other, against core shroud or against lower core support. The corresponding impact loads must be absorbed by the FA spacer grids and guide thimbles. In this paper FA-loads are calculated with and without consideration of Fluid-Structure-Interaction (FSI) effects for assumed different break sizes of the main coolant pipe. The analysis has been performed for a hypothetical cold leg break of a typical SIEMENS-4 loop plant. For this purpose the codes DAPSY/DAISY (GRS, Germany) were coupled with the structural code KWUSTOSS (SIEMENS). It is shown that the FA loads obtained in calculations with consideration of FSI effects are by a factor of 2-4 lower than those obtained in the corresponding calculations without consideration of FSI. (author)

  8. The Relationship Between Personality and Schadenfreude in Hypothetical Versus Live Situations.

    Science.gov (United States)

    Greenier, Keegan D

    2018-06-01

    This study sought to investigate how individual differences are related to schadenfreude (pleasure derived from another's misfortune) by replicating past findings and extending them to additional personality traits. Because most past research on schadenfreude has relied heavily on the use of reactions to hypothetical scenarios, an attempt was made to demonstrate external validity by also including a reaction to a live event (confederate misfortune). For the scenarios, schadenfreude was positively correlated with the Dark Triad and just world beliefs; negatively correlated with empathy and agreeableness; and uncorrelated with dispositional envy, self-esteem, or the remaining Big Five traits. For the live event, no personality traits were correlated with schadenfreude, suggesting responses to hypothetical situations may not be representative of real-life schadenfreude events.

  9. Methods and calculations for regional, continental, and global dose assessments from a hypothetical fuel reprocessing facility

    International Nuclear Information System (INIS)

    Schubert, J.F.; Kern, C.D.; Cooper, R.E.; Watts, J.R.

    1978-01-01

    The Savannah River Laboratory (SRL) is coordinating an interlaboratory effort to provide, test, and use state-of-the-art methods for calculating the environmental impact to an offsite population from the normal releases of radionuclides during the routine operation of a fuel-reprocessing plant. Results of this effort are the estimated doses to regional, continental, and global populations. Estimates are based upon operation of a hypothetical reprocessing plant at a site in the southeastern United States. The hypothetical plant will reprocess fuel used at a burn rate of 30 megawatts/metric ton and a burnup of 33,000 megawatt days/metric ton. All fuel will have been cooled for at least 365 days. The plant will have a 10 metric ton/day capacity and an assumed 3000 metric ton/year (82 percent online plant operation) output. Lifetime of the plant is assumed to be 40 years

  10. Application of an infiltration evaluation methodology to a hypothetical low-level waste disposal facility

    International Nuclear Information System (INIS)

    Meyer, P.D.

    1993-12-01

    This report provides an analysis of infiltration and percolation at a hypothetical low-level waste (LLW) disposal facility was carried out. The analysis was intended to illustrate general issues of concern in assessing the performance of LLW disposal facilities. Among the processes considered in the analysis were precipitation, runoff, information, evaporation, transpiration, and redistribution. The hypothetical facility was located in a humid environment characterized by frequent and often intense precipitation events. The facility consisted of a series of concrete vaults topped by a multilayer cover. Cover features included a sloping soil surface to promote runoff, plant growth to minimize erosion and promote transportation, a sloping clay layer, and a sloping capillary barrier. The analysis within the root zone was carried out using a one-dimensional, transient simulation of water flow. Below the root zone, the analysis was primarily two-dimensional and steady-state

  11. Structure of the conserved hypothetical protein MAL13P1.257 from Plasmodium falciparum

    International Nuclear Information System (INIS)

    Holmes, Margaret A.; Buckner, Frederick S.; Van Voorhis, Wesley C.; Mehlin, Christopher; Boni, Erica; Earnest, Thomas N.; DeTitta, George; Luft, Joseph; Lauricella, Angela; Anderson, Lori; Kalyuzhniy, Oleksandr; Zucker, Frank; Schoenfeld, Lori W.; Hol, Wim G. J.; Merritt, Ethan A.

    2006-01-01

    The crystal structure of a conserved hypothetical protein, MAL13P1.257 from P. falciparum, has been determined at 2.17 Å resolution. The structure represents a new protein fold and is the first structural representative for Pfam sequence family PF05907. The structure of a conserved hypothetical protein, PlasmoDB sequence MAL13P1.257 from Plasmodium falciparum, Pfam sequence family PF05907, has been determined as part of the structural genomics effort of the Structural Genomics of Pathogenic Protozoa consortium. The structure was determined by multiple-wavelength anomalous dispersion at 2.17 Å resolution. The structure is almost entirely β-sheet; it consists of 15 β-strands and one short 3 10 -helix and represents a new protein fold. The packing of the two monomers in the asymmetric unit indicates that the biological unit may be a dimer.

  12. Radiological consequences of a hypothetical ''roof breakdown'' accident of the Chernobyl sarcophagus

    International Nuclear Information System (INIS)

    Pretzsch, G.

    1997-01-01

    On behalf of the German Federal Ministry for Environment, Nature Conservation and Nuclear Safety GRS performed investigations with the aim to improve the safety of the Chernobyl Unit 4 shelter in close connection with the Ministry for Environment and Nuclear Safety of the Ukraina from 1992 to 1995. One of the tasks of the working programme was concerned with the analysis of hypothetical accidents of the present shelter, which comprises the newly built Sarcophagus and the remaining ruins of Unit 4. In close collaboration with Ukrainian and Russian experts the maximum hypothetical accident was defined to be the breakdown of the roof of the Sarcophagus and subsequent release of the radioactive dust which is mainly located in the destroyed reactor hall and the neighboring rooms

  13. Epstein-Barr virus (EBV Rta-mediated EBV and Kaposi's sarcoma-associated herpesvirus lytic reactivations in 293 cells.

    Directory of Open Access Journals (Sweden)

    Yen-Ju Chen

    Full Text Available Epstein-Barr virus (EBV Rta belongs to a lytic switch gene family that is evolutionarily conserved in all gamma-herpesviruses. Emerging evidence indicates that cell cycle arrest is a common means by which herpesviral immediate-early protein hijacks the host cell to advance the virus's lytic cycle progression. To examine the role of Rta in cell cycle regulation, we recently established a doxycycline (Dox-inducible Rta system in 293 cells. In this cell background, inducible Rta modulated the levels of signature G1 arrest proteins, followed by induction of the cellular senescence marker, SA-β-Gal. To delineate the relationship between Rta-induced cell growth arrest and EBV reactivation, recombinant viral genomes were transferred into Rta-inducible 293 cells. Somewhat unexpectedly, we found that Dox-inducible Rta reactivated both EBV and Kaposi's sarcoma-associated herpesvirus (KSHV, to similar efficacy. As a consequence, the Rta-mediated EBV and KSHV lytic replication systems, designated as EREV8 and ERKV, respectively, were homogenous, robust, and concurrent with cell death likely due to permissive lytic replication. In addition, the expression kinetics of EBV lytic genes in Dox-treated EREV8 cells was similar to that of their KSHV counterparts in Dox-induced ERKV cells, suggesting that a common pathway is used to disrupt viral latency in both cell systems. When the time course was compared, cell cycle arrest was achieved between 6 and 48 h, EBV or KSHV reactivation was initiated abruptly at 48 h, and the cellular senescence marker was not detected until 120 h after Dox treatment. These results lead us to hypothesize that in 293 cells, Rta-induced G1 cell cycle arrest could provide (1 an ideal environment for virus reactivation if EBV or KSHV coexists and (2 a preparatory milieu for cell senescence if no viral genome is available. The latter is hypothetical in a transient-lytic situation.

  14. Analysis of hypothetical incidents in nuclear power plants with PWR and HTR

    International Nuclear Information System (INIS)

    Geiser, H.

    1977-01-01

    Several accident analyses are reviewed with a view to fission product release, and the findings are transferred to German reactor plants with LWR and HTR and compared. First of all, hypothetical accidents are compared for both of these lines; after this, the history of accidents is briefly described, and the fission product release during these accidents is investigated. For both reactor lines, there is a different but sufficiently high potential for safety improvements. (orig.) [de

  15. Risk Management in Smallholder Cattle Farming: A Hypothetical Insurance Approach in Western Kenya

    OpenAIRE

    Otieno, David Jakinda; Oluoch-Kosura, Willis; Karugia, Joseph Thuo; Drucker, Adam G.; Rege, Edward

    2006-01-01

    Smallholder cattle farming is an important livelihood strategy in most developing countries like Kenya. However, tropical diseases in Africa often wipe out these valuable assets. This paper focuses on mitigation of cattle disease risks through a hypothetical insurance scheme. The study is based on data from a survey conducted on a purposive sample of 300 smallholder cattle farmers in Kakamega and Siaya districts of Western Kenya. Descriptive measures and a regression model were used in the an...

  16. Interpersonal deviance and consequent social impact in hypothetically schizophrenia-prone men.

    Science.gov (United States)

    Zborowski, M J; Garske, J P

    1993-08-01

    Interpersonal deviance is central to the theory of and research on schizotypal psychopathology. The present study investigated interpersonal deviance and its corresponding impact among hypothetically schizotypic, or schizophrenia-prone, men, defined by high scores on the Perceptual Aberration-Magical Ideation (Per-Mag) Scale. In a videotaped interview, high-scoring Ss relative to control Ss were rated as more odd (p scale and suggest that interpersonal factors may influence the eventual adjustment of high-scoring individuals.

  17. Parent and medical professional willingness to enroll children in a hypothetical pediatric optic neuritis treatment trial

    Directory of Open Access Journals (Sweden)

    Amy eWaldman

    2011-11-01

    Full Text Available The Optic Neuritis Treatment Trial and subsequent studies have had a tremendous impact on the treatment and prognosis of optic neuritis and multiple sclerosis in adults. The results of these studies have been extrapolated to children; however, pediatric data are sparse. Using the method of prospective preference assessment, the willingness of parents and medical professionals to enroll children in a hypothetical Pediatric Optic Neuritis Treatment Trial was assessed using a mock consent form and questionnaire. A 3-arm trial was proposed: 1 intravenous corticosteroids, 2 high-dose oral corticosteroids, and 3 an oral placebo. The forms were completed by 198 parents and 49 physicians. After reviewing the hypothetical scenario, trial design, risks and benefits, and alternatives to the study, 21% of parents would enroll their children in the trial whereas 98% of medical professionals would enroll their patients. With medical professional recommendation, 43% of parents would enroll their children. The manner in which this hypothetical trial was presented to parents, specifically with respect to the recommendation of their child’s health care team, influenced a parent’s willingness to participate.

  18. Excessive Gestational Weight Gain and Subsequent Maternal Obesity at Age 40: A Hypothetical Intervention.

    Science.gov (United States)

    Abrams, Barbara; Coyle, Jeremy; Cohen, Alison K; Headen, Irene; Hubbard, Alan; Ritchie, Lorrene; Rehkopf, David H

    2017-09-01

    To model the hypothetical impact of preventing excessive gestational weight gain on midlife obesity and compare the estimated reduction with the US Healthy People 2020 goal of a 10% reduction of obesity prevalence in adults. We analyzed 3917 women with 1 to 3 pregnancies in the prospective US National Longitudinal Survey of Youth, from 1979 to 2012. We compared the estimated obesity prevalence between 2 scenarios: gestational weight gain as reported and under the scenario of a hypothetical intervention that all women with excessive gestational weight gain instead gained as recommended by the Institute of Medicine (2009). A hypothetical intervention was associated with a significantly reduced estimated prevalence of obesity for first (3.3 percentage points; 95% confidence interval [CI] = 1.0, 5.6) and second (3.0 percentage points; 95% CI = 0.7, 5.2) births, and twice as high in Black as in White mothers, but not significant in Hispanics. The population attributable fraction was 10.7% (95% CI = 3.3%, 18.1%) in first and 9.3% (95% CI = 2.2%, 16.5%) in second births. Development of effective weight-management interventions for childbearing women could lead to meaningful reductions in long-term obesity.

  19. Digital reactivity meter

    International Nuclear Information System (INIS)

    Akkus, B.; Anac, H.; Alsan, S.; Erk, S.

    1991-01-01

    Nowadays, various digital methods making use of microcomputers for neutron detector signals and determining the reactivity by numerical calculations are used in reactor control systems in place of classical reactivity meters. In this work, a calculation based on the ''The Time Dependent Transport Equation'' has been developed for determining the reactivity numerically. The reactivity values have been obtained utilizing a computer-based data acquisition and control system and compared with the analog reactivity meter values as well as the values calculated from the ''Inhour Equation''

  20. Method of controlling reactivity

    International Nuclear Information System (INIS)

    Tochihara, Hiroshi.

    1982-01-01

    Purpose: To improve the reactivity controlling characteristics by artificially controlling the leakage of neutron from a reactor and providing a controller for controlling the reactivity. Method: A reactor core is divided into several water gaps to increase the leakage of neutron, its reactivity is reduced, a gas-filled control rod or a fuel assembly is inserted into the gap as required, the entire core is coupled in a system to reduce the leakage of the neutron, and the reactivity is increased. The reactor shutdown is conducted by the conventional control rod, and to maintain critical state, boron density varying system is used together. Futher, a control rod drive is used with that similar to the conventional one, thereby enabling fast reactivity variation, and the positive reactivity can be obtained by the insertion, thereby improving the reactivity controlling characteristics. (Yoshihara, H.)

  1. Global modelling of the total OH reactivity: investigations on the “missing” OH sink and its atmospheric implications

    Directory of Open Access Journals (Sweden)

    V. Ferracci

    2018-05-01

    Full Text Available The hydroxyl radical (OH plays a crucial role in the chemistry of the atmosphere as it initiates the removal of most trace gases. A number of field campaigns have observed the presence of a missing OH sink in a variety of regions across the planet. A comparison of direct measurements of the OH loss frequency, also known as total OH reactivity (kOH, with the sum of individual known OH sinks (obtained via the simultaneous detection of species such as volatile organic compounds and nitrogen oxides indicates that, in some cases, up to 80 % of kOH is unaccounted for. In this work, the UM-UKCA chemistry-climate model was used to investigate the wider implications of the missing reactivity on the oxidising capacity of the atmosphere. Simulations of the present-day atmosphere were performed and the model was evaluated against an array of field measurements to verify that the known OH sinks were reproduced well, with a resulting good agreement found for most species. Following this, an additional sink was introduced to simulate the missing OH reactivity as an emission of a hypothetical molecule, X, which undergoes rapid reaction with OH. The magnitude and spatial distribution of this sink were underpinned by observations of the missing reactivity. Model runs showed that the missing reactivity accounted for on average 6 % of the total OH loss flux at the surface and up to 50 % in regions where emissions of the additional sink were high. The lifetime of the hydroxyl radical was reduced by 3 % in the boundary layer, whilst tropospheric methane lifetime increased by 2 % when the additional OH sink was included. As no OH recycling was introduced following the initial oxidation of X, these results can be interpreted as an upper limit of the effects of the missing reactivity on the oxidising capacity of the troposphere. The UM-UKCA simulations also allowed us to establish the atmospheric implications of the newly characterised reactions of peroxy

  2. N-glycans released from glycoproteins using a commercial kit and comprehensively analyzed with a hypothetical database

    Directory of Open Access Journals (Sweden)

    Xue Sun

    2017-04-01

    Full Text Available The glycosylation of proteins is responsible for their structural and functional roles in many cellular activities. This work describes a strategy that combines an efficient release, labeling and liquid chromatography-mass spectral analysis with the use of a comprehensive database to analyze N-glycans. The analytical method described relies on a recently commercialized kit in which quick deglycosylation is followed by rapid labeling and cleanup of labeled glycans. This greatly improves the separation, mass spectrometry (MS analysis and fluorescence detection of N-glycans. A hypothetical database, constructed using GlycResoft, provides all compositional possibilities of N-glycans based on the common sugar residues found in N-glycans. In the initial version this database contains >8,700 N-glycans, and is compatible with MS instrument software and expandable. N-glycans from four different well-studied glycoproteins were analyzed by this strategy. The results provided much more accurate and comprehensive data than had been previously reported. This strategy was then used to analyze the N-glycans present on the membrane glycoproteins of gastric carcinoma cells with different degrees of differentiation. Accurate and comprehensive N-glycan data from those cells was obtained efficiently and their differences compared corresponding to their differentiation states. Thus, the novel strategy developed greatly improves accuracy, efficiency and comprehensiveness of N-glycan analysis.

  3. A coupled hydraulic and structure-dynamic model for prediction of RCCA drop time under hypothetical FA deformation

    International Nuclear Information System (INIS)

    Ren, Mingmin; Dressel, Bernd

    2009-01-01

    The ability of the RCCA (Rod Control Cluster Assemblies) in a pressurized water reactor (PWR) to be fully inserted into the core and to reach the dashpot within a required time limit is one of the important safety requirements for quick shutdown. This kind of quick shutdown in a PWR is initiated by allowing the control rod with the drive rod together to fall into the core by gravity. During normal operation, the RCCA drop time is mainly influenced by the weight of control assembly, hydraulic resistance in the CRDM (Control Rod Drive Mechanism), control rod guide assembly and guide thimbles and by the mechanical friction forces between the RCCA and its surroundings. In the case of an accident, e.g. earthquake, an additional influence of horizontal vibrations of the RCCA and its surroundings has to be considered [1]. A coupled hydraulic and structure-dynamic model is presented in this paper for prediction of RCCA drop time down to dashpot under hypothetical fuel assembly (FA) deformations. This coupled model was verified by RCCA static and dynamic drop tests with a deformed FA and by RCCA drop tests under operational conditions. (orig.)

  4. Assessment of possible allergenicity of hypothetical ORFs in common food crops using current bioinformatic guidelines and its implications for the safety assessment of GM crops.

    Science.gov (United States)

    Young, Gregory J; Zhang, Shiping; Mirsky, Henry P; Cressman, Robert F; Cong, Bin; Ladics, Gregory S; Zhong, Cathy X

    2012-10-01

    Before a genetically modified (GM) crop can be commercialized it must pass through a rigorous regulatory process to verify that it is safe for human and animal consumption, and to the environment. One particular area of focus is the potential introduction of a known or cross-reactive allergen not previously present within the crop. The assessment of possible allergenicity uses the guidelines outlined by the Food and Agriculture Organization (FAO) and World Health Organization's (WHO) Codex Alimentarius Commission (Codex) to evaluate all newly expressed proteins. Some regulatory authorities have broadened the scope of the assessment to include all DNA reading frames between stop codons across the insert and spanning the insert/genomic DNA junctions. To investigate the utility of this bioinformatic assessment, all naturally occurring stop-to-stop frames in the non-transgenic genomes of maize, rice, and soybean, as well as the human genome, were compared against the AllergenOnline (www.allergenonline.org) database using the Codex criteria. We discovered thousands of frames that exceeded the Codex defined threshold for potential cross-reactivity suggesting that evaluating hypothetical ORFs (stop-to-stop frames) has questionable value for making decisions on the safety of GM crops. Copyright © 2012 Elsevier Ltd. All rights reserved.

  5. Reactive Programming in Java

    CERN Document Server

    CERN. Geneva

    2017-01-01

    Reactive Programming in gaining a lot of excitement. Many libraries, tools, and frameworks are beginning to make use of reactive libraries. Besides, applications dealing with big data or high frequency data can benefit from this programming paradigm. Come to this presentation to learn about what reactive programming is, what kind of problems it solves, how it solves them. We will take an example oriented approach to learning the programming model and the abstraction.

  6. BN600 reactivity definition

    International Nuclear Information System (INIS)

    Zheltyshev, V.; Ivanov, A.

    2000-01-01

    Since 1980, the fast BN600 reactor with sodium coolant has been operated at Beloyarsk Nuclear Power Plant. The periodic monitoring of the reactivity modifications should be implemented in compliance with the standards and regulations applied in nuclear power engineering. The reactivity measurements are carried out in order to confirm the basic neutronic features of a BN600 reactor. The reactivity measurements are aimed to justify that nuclear safety is provided in course of the in-reactor installation of the experimental core components. Two reactivity meters are to be used on BN600 operation: 1. Digital on-line reactivity calculated under stationary reactor operation on power (approximation of the point-wise kinetics is applied). 2. Second reactivity meter used to define the reactor control rod operating components efficiency under reactor startup and take account of the changing efficiency of the sensor, however, this is more time-consumptive than the on-line reactivity meter. The application of two reactivity meters allows for the monitoring of the reactor reactivity under every operating mode. (authors)

  7. Sensitivity Analysis of Evacuation Speed in Hypothetical NPP Accident by Earthquake

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sung-yeop; Lim, Ho-Gon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    Effective emergency response in emergency situation of nuclear power plant (NPP) can make consequences be different therefore it is regarded important when establishing an emergency response plan and assessing the risk of hypothetical NPP accident. Situation of emergency response can be totally changed when NPP accident caused by earthquake or tsunami is considered due to the failure of roads and buildings by the disaster. In this study evacuation speed has been focused among above various factors and reasonable evacuation speed in earthquake scenario has been investigated. Finally, sensitivity analysis of evacuation speed in hypothetical NPP accident by earthquake has been performed in this study. Evacuation scenario can be entirely different in the situation of seismic hazard and the sensitivity analysis of evacuation speed in hypothetical NPP accident by earthquake has been performed in this study. Various references were investigated and earthquake evacuation model has been developed considering that evacuees may convert their evacuation method from using a vehicle to walking when they face the difficulty of using a vehicle due to intense traffic jam, failure of buildings and roads, and etc. The population dose within 5 km / 30 km have been found to be increased in earthquake situation due to decreased evacuation speed and become 1.5 - 2 times in the severest earthquake evacuation scenario set up in this study. It is not agreed that using same emergency response model which is used for normal evacuation situations when performing level 3 probabilistic safety assessment for earthquake and tsunami event. Investigation of data and sensitivity analysis for constructing differentiated emergency response model in the event of seismic hazard has been carried out in this study.

  8. Ability to Categorize Food Predicts Hypothetical Food Choices in Head Start Preschoolers.

    Science.gov (United States)

    Nicholson, Jody S; Barton, Jennifer M; Simons, Ali L

    2018-03-01

    To investigate whether preschoolers are able to identify and categorize foods, and whether their ability to classify food as healthy predicts their hypothetical food choice. Structured interviews and body measurements with preschoolers, and teacher reports of classroom performance. Six Head Start centers in a large southeastern region. A total of 235 preschoolers (mean age [SD], 4.73 [0.63] years; 45.4% girls). Teachers implemented a nutrition education intervention across the 2014-2015 school year in which children were taught to identify and categorize food as sometimes (ie, unhealthy) and anytime (ie, healthy). Preschooler responses to a hypothetical snack naming, classifying, and selection scenario. Hierarchical regression analyses to examine predictors of child hypothetical food selection. While controlling for child characteristics and cognitive functioning, preschoolers who were better at categorizing food as healthy or unhealthy were more likely to say they would choose the healthy food. Low-contrast food pairs in which food had to be classified based on multiple dimensions were outside the cognitive abilities of the preschoolers. Nutrition interventions may be more effective in helping children make healthy food choices if developmental limitations in preschoolers' abilities to categorize food is addressed in their curriculum. Classification of food into evaluative categories is challenging for this age group. Categorizing on multiple dimensions is difficult, and dichotomous labeling of food as good or bad is not always accurate in directing children toward making food choices. Future research could evaluate further preschoolers' developmental potential for food categorization and nutrition decision making and consider factors that influence healthy food choices at both snack and mealtime. Copyright © 2017 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

  9. Sensitivity Analysis of Evacuation Speed in Hypothetical NPP Accident by Earthquake

    International Nuclear Information System (INIS)

    Kim, Sung-yeop; Lim, Ho-Gon

    2016-01-01

    Effective emergency response in emergency situation of nuclear power plant (NPP) can make consequences be different therefore it is regarded important when establishing an emergency response plan and assessing the risk of hypothetical NPP accident. Situation of emergency response can be totally changed when NPP accident caused by earthquake or tsunami is considered due to the failure of roads and buildings by the disaster. In this study evacuation speed has been focused among above various factors and reasonable evacuation speed in earthquake scenario has been investigated. Finally, sensitivity analysis of evacuation speed in hypothetical NPP accident by earthquake has been performed in this study. Evacuation scenario can be entirely different in the situation of seismic hazard and the sensitivity analysis of evacuation speed in hypothetical NPP accident by earthquake has been performed in this study. Various references were investigated and earthquake evacuation model has been developed considering that evacuees may convert their evacuation method from using a vehicle to walking when they face the difficulty of using a vehicle due to intense traffic jam, failure of buildings and roads, and etc. The population dose within 5 km / 30 km have been found to be increased in earthquake situation due to decreased evacuation speed and become 1.5 - 2 times in the severest earthquake evacuation scenario set up in this study. It is not agreed that using same emergency response model which is used for normal evacuation situations when performing level 3 probabilistic safety assessment for earthquake and tsunami event. Investigation of data and sensitivity analysis for constructing differentiated emergency response model in the event of seismic hazard has been carried out in this study

  10. Guide to General Atomic studies of hypothetical nuclear driven accidents for the Fort St. Vrain reactor

    International Nuclear Information System (INIS)

    Wei, T.; Tobias, M.

    1974-03-01

    The work of the General Atomic Company (GAC) in preparing those portions of the Final Safety Analysis Report for the Fort St. Vrain Reactor (FSV) having to do with hypothetical nuclear driven accidents has been reviewed and a guide to this literature has been prepared. The sources for this study are the Final Safety Analysis Report itself, the Quarterly and Monthly Progress Reports, Topical Reports, and Technical Specifications. The problems considered and the methods used are outlined. An appendix gives a systematic analysis which was used as a guide in organizing the references. (U.S.)

  11. BOLD responses in reward regions to hypothetical and imaginary monetary rewards.

    OpenAIRE

    Miyapuram Krishna P; Tobler Philippe N; Gregorios-Pippas Lucy; Schultz Wolfram

    2012-01-01

    Monetary rewards are uniquely human. Because money is easy to quantify and present visually, it is the reward of choice for most fMRI studies, even though it cannot be handed over to participants inside the scanner. A typical fMRI study requires hundreds of trials and thus small amounts of monetary rewards per trial (e.g. 5p) if all trials are to be treated equally. However, small payoffs can have detrimental effects on performance due to their limited buying power. Hypothetical monetary rewa...

  12. KADIS: a program to analyse the disassembly phase of hypothetical accidents in LMFBRs

    International Nuclear Information System (INIS)

    Schmuck, P.; Jacobs, G.; Arnecke, G.

    1977-11-01

    The program KADIS models the disassembly phase during power excursions in LMFBR hypothetical accidents. KADIS is based on point kinetics in the neutronics part and on a 2-dimensional representation of the reactor core in the hydrodynamics part. The core is modeled as an ideal, compressible fluid which is heated up adiabatically during the excursion. KADIS was built up with the help of the VENUS program of Argonne National Laboratory. Several important features were added to the basic VENUS model. Therefore we give first a complete description of the mathematical models used. Secondly we provide the user with the necessary information to handle the input/output of KADIS. (orig.) [de

  13. Consequences in Norway of a hypothetical accident at Sellafield: Potential release - transport and fallout

    International Nuclear Information System (INIS)

    Ytre-Eide, M. A.; Standring, W.J.F.; Amundsen, I.; Sickel, M.; Liland, A.; Saltbones, J.; Bartnicki, J.; Haakenstad, H.; Salbu, B.

    2009-03-01

    This report focuses on transport and fallout from 'worst-case' scenarios based on a hypothetical accident at the B215 facility for storing Highly Active Liquors (HAL) at Sellafield. The scenarios involve an atmospheric release of between 0.1-10 % of the total HAL inventory; only transport and fallout of 137 Cs is considered in this case study. Simulations resulted in between 0.1-50 times the maximum 137 Cs fallout experienced in the most contaminated areas in Norway after the Chernobyl accident. (Author)

  14. Analysis of hypothetical LMFBR whole-core accidents in the USA

    International Nuclear Information System (INIS)

    Ferguson, D.R.; Deitrich, L.W.; Brown, N.W.; Waltar, A.E.

    1978-01-01

    The issue of hypothetical whole-core accidents continues to play a significant role in assessment of the potential risk to the public associated with LMFBR operation in the USA. The paper briefly characterizes the changing nature of this role, with emphasis on the current risk-oriented perspective. It then describes the models and codes used for accident analysis in the USA which have been developed under DOE sponsorship and summarizes some specific applications of the codes to the current generation of fast reactors. An assessment of future trends in this area concludes the paper

  15. Theoretical and hypothetical framework for research on political socialization process in the family

    Directory of Open Access Journals (Sweden)

    Čičkarić Lilijana

    2005-01-01

    Full Text Available The aim of the article is to sum up theoretical and hypothetical framework for empirical research of political socialization process in the family in Serbian society nowadays. The investigation focuses on two theoretical concepts, political socialization and generation as a sociological paradigm. Two methodological approaches are applied. First is interactive model of political socialization, based on analysis of relations between individual who is socialized, agents of political socialization, dominant political system and peripheral social sub-systems. The second one tests interactive relation of generation, lifecycle and effects of epoch. It is suitable for definition of certain historical periods with active role of political.

  16. Designing a Physical Security System for Risk Reduction in a Hypothetical Nuclear Facility

    International Nuclear Information System (INIS)

    Saleh, A.A.; Abd Elaziz, M.

    2017-01-01

    Physical security in a nuclear facility means detection, prevention and response to threat, the ft, sabotage, unauthorized access and illegal transfer involving radioactive and nuclear material. This paper proposes a physical security system designing concepts to reduce the risk associated with variant threats to a nuclear facility. This paper presents a study of the unauthorized removal and sabotage in a hypothetical nuclear facility considering deter, delay and response layers. More over, the study involves performing any required upgrading to the security system by investigating the nuclear facility layout and considering all physical security layers design to enhance the weakness for risk reduction

  17. Hypothetical air ingress scenarios in advanced modular high temperature gas cooled reactors

    International Nuclear Information System (INIS)

    Kroeger, P.G.

    1988-01-01

    Considering an extremely hypothetical scenario of complete cross duct failure and unlimited air supply into the reactor vessel of a modular high temperature gas cooled ractor, it is found that the potential air inflow remains limited due to the high friction pressure drop through the active core. All incoming air will be oxidized to CO and some local external burning would be temporarily possible in such a scenario. The accident would have to continue with unlimited air supply for hundreds of hours before the core structural integrity would be jeopardized

  18. Models and methods for predicting the release of fission products during hypothetical accidents in HTGRs

    International Nuclear Information System (INIS)

    Bailly, H.W.

    1988-01-01

    The paper deals with experiments, computational models and methods used to describe the fission product transport (diffusion and particle failure) in the fuel elements of a pebble-bed high-temperature module reactor (HTGR Module) during hypothetical accidents. The codes which describe the diffusion of fission products in the fuel elements are e.g. GETTER and FRESCO. PANAMA, IA/KWU failure function and the so called GOODIN models describe the particle failure. All these models may be used in the risk analysis. The experimental results obtained at the Nuclear Research Center Julich, Germany are discussed and compared with the model calculations for these experiments

  19. U.S. Adult Interest in Less Harmful and Less Addictive Hypothetical Modified Risk Tobacco Products.

    Science.gov (United States)

    O'Brien, Erin Keely; Persoskie, Alexander; Parascandola, Mark; Hoffman, Allison C

    2017-09-28

    Tobacco companies have a history of making health claims about their new products. Such claims are now regulated by the U.S. Food and Drug Administration. We examined consumer interest in hypothetical modified risk tobacco products (MRTPs) among current, former and never established smokers, and examined whether interest was associated with beliefs about tobacco and cancer. Data were analyzed from the U.S. nationally representative 2015 Health Information National Trends Survey (HINTS-FDA 2015; N = 3,738). Interest in hypothetical MRTPs was assessed by asking participants their likelihood of using tobacco products claiming to be less addictive and less harmful than other products. About half of current smokers and a tenth of both former and never smokers reported they were "somewhat" or "very" likely to try hypothetical MRTPs claiming to be less harmful or less addictive. Female smokers, former smokers with lower smoking harm perceptions, and never smokers who are young adults or without college education expressed more interest in these products. Interest in using these products was positively associated with believing that smoking status is a changeable individual characteristic and that it is possible for tobacco products to be made without some harmful chemicals. We identified several subgroups of current, former, and never smokers who may be particularly affected by the marketing of MRTPs and therefore important to study to inform models of the potential population health impact of authorizing the marketing of MRTPs. Findings about interest in hypothetical MRTPs can inform models of how the marketing of MRTPs could affect population health. Understanding which subgroups are particularly interested in MRTPs can help determine who might be important to study to inform these models. We identified several groups who may warrant specific attention: smokers who are female, former smokers who hold low harm perceptions of smoking, never smokers who are young adults or

  20. Emission control strategies for short-chain chloroparaffins in two semi-hypothetical case cities

    DEFF Research Database (Denmark)

    Eriksson, Eva; Revitt, M.; Lützhøft, Hans-Christian Holten

    2012-01-01

    The short-chain chloroparaffins (SCCP), (C10-13 chloroalkanes) are identified in the European Water Framework Directive, as priority hazardous substances. Within the ScorePP project, the aim is to develop emission control strategies that can be employed to reduce emissions from urban areas...... into receiving waters. Six different scenarios for mitigating SCCP emissions in two different semi-hypothetical case cities representing eastern inland and northern coastal conditions have been evaluated. The analysis, associated with scenario uncertainty, indicates that the EU legislation, Best Available...

  1. Modeling the consequences of hypothetical accidents for the Titan II system

    International Nuclear Information System (INIS)

    Greenly, G.D.; Sullivan, T.J.

    1981-11-01

    Calculations have been made with the Atmospheric Release Advisory Capability (ARAC) suite of three-dimensional transport and diffusion codes MATHEW/ADPIC to assess the consequences of severe, hypothetical accident scenarios. One set of calculations develops the integrated dose and surface deposition patterns for a non-nuclear, high explosive detonation and dispersal of material. A second set of calculations depicts the time integrated dose and instantaneous concentration patterns for a substantial, continuous leak of the missile fuel oxidizer converted to nitrogen dioxide (NO 2 ). The areas affected and some of the implications for emergency response management are discussed

  2. Reducing therapeutic misconception: A randomized intervention trial in hypothetical clinical trials.

    Directory of Open Access Journals (Sweden)

    Paul P Christopher

    Full Text Available Participants in clinical trials frequently fail to appreciate key differences between research and clinical care. This phenomenon, known as therapeutic misconception, undermines informed consent to clinical research, but to date there have been no effective interventions to reduce it and concerns have been expressed that to do so might impede recruitment. We determined whether a scientific reframing intervention reduces therapeutic misconception without significantly reducing willingness to participate in hypothetical clinical trials.This prospective randomized trial was conducted from 2015 to 2016 to test the efficacy of an informed consent intervention based on scientific reframing compared to a traditional informed consent procedure (control in reducing therapeutic misconception among patients considering enrollment in hypothetical clinical trials modeled on real-world studies for one of five disease categories. Patients with diabetes mellitus, hypertension, coronary artery disease, head/neck cancer, breast cancer, and major depression were recruited from medical clinics and a clinical research volunteer database. The primary outcomes were therapeutic misconception, as measured by a validated, ten-item Therapeutic Misconception Scale (range = 10-50, and willingness to participate in the clinical trial.154 participants completed the study (age range, 23-87 years; 92.3% white, 56.5% female; 74 (48.1% had been randomized to receive the experimental intervention. Therapeutic misconception was significantly lower (p = 0.004 in the scientific reframing group (26.4, 95% CI [23.7 to 29.1] compared to the control group (30.9, 95% CI [28.4 to 33.5], and remained so after controlling for education (p = 0.017. Willingness to participate in the hypothetical trial was not significantly different (p = 0.603 between intervention (52.1%, 95% CI [40.2% to 62.4%] and control (56.3%, 95% CI [45.3% to 66.6%] groups.An enhanced educational intervention augmenting

  3. Screening and expression of selected taxonomically conserved and unique hypothetical proteins in Burkholderia pseudomallei K96243

    Science.gov (United States)

    Akhir, Nor Azurah Mat; Nadzirin, Nurul; Mohamed, Rahmah; Firdaus-Raih, Mohd

    2015-09-01

    Hypothetical proteins of bacterial pathogens represent a large numbers of novel biological mechanisms which could belong to essential pathways in the bacteria. They lack functional characterizations mainly due to the inability of sequence homology based methods to detect functional relationships in the absence of detectable sequence similarity. The dataset derived from this study showed 550 candidates conserved in genomes that has pathogenicity information and only present in the Burkholderiales order. The dataset has been narrowed down to taxonomic clusters. Ten proteins were selected for ORF amplification, seven of them were successfully amplified, and only four proteins were successfully expressed. These proteins will be great candidates in determining the true function via structural biology.

  4. A reactive transport model for mercury fate in contaminated soil--sensitivity analysis.

    Science.gov (United States)

    Leterme, Bertrand; Jacques, Diederik

    2015-11-01

    We present a sensitivity analysis of a reactive transport model of mercury (Hg) fate in contaminated soil systems. The one-dimensional model, presented in Leterme et al. (2014), couples water flow in variably saturated conditions with Hg physico-chemical reactions. The sensitivity of Hg leaching and volatilisation to parameter uncertainty is examined using the elementary effect method. A test case is built using a hypothetical 1-m depth sandy soil and a 50-year time series of daily precipitation and evapotranspiration. Hg anthropogenic contamination is simulated in the topsoil by separately considering three different sources: cinnabar, non-aqueous phase liquid and aqueous mercuric chloride. The model sensitivity to a set of 13 input parameters is assessed, using three different model outputs (volatilized Hg, leached Hg, Hg still present in the contaminated soil horizon). Results show that dissolved organic matter (DOM) concentration in soil solution and the binding constant to DOM thiol groups are critical parameters, as well as parameters related to Hg sorption to humic and fulvic acids in solid organic matter. Initial Hg concentration is also identified as a sensitive parameter. The sensitivity analysis also brings out non-monotonic model behaviour for certain parameters.

  5. Electrospinning of reactive mesogens

    NARCIS (Netherlands)

    Yao, J.; Picot, O.T.; Hughes-Brittain, N.F.; Bastiaansen, C.W.M.; Peijs, T.

    2016-01-01

    The reinforcement potential of reactive liquid crystals or reactive mesogens (RMs) in electrospun fibers was investigated through the blending of two types of RMs (RM257 and RM82) with two types of thermoplastics; polyamide 6 (PA6) and poly(methyl methacrylate) (PMMA). Polymer/RM blends were

  6. Evaluating the impacts of farmers' behaviors on a hypothetical agricultural water market based on double auction

    Science.gov (United States)

    Du, Erhu; Cai, Ximing; Brozović, Nicholas; Minsker, Barbara

    2017-05-01

    Agricultural water markets are considered effective instruments to mitigate the impacts of water scarcity and to increase crop production. However, previous studies have limited understanding of how farmers' behaviors affect the performance of water markets. This study develops an agent-based model to explicitly incorporate farmers' behaviors, namely irrigation behavior (represented by farmers' sensitivity to soil water deficit λ) and bidding behavior (represented by farmers' rent seeking μ and learning rate β), in a hypothetical water market based on a double auction. The model is applied to the Guadalupe River Basin in Texas to simulate a hypothetical agricultural water market under various hydrological conditions. It is found that the joint impacts of the behavioral parameters on the water market are strong and complex. In particular, among the three behavioral parameters, λ affects the water market potential and its impacts on the performance of the water market are significant under most scenarios. The impacts of μ or β on the performance of the water market depend on the other two parameters. The water market could significantly increase crop production only when the following conditions are satisfied: (1) λ is small and (2) μ is small and/or β is large. The first condition requires efficient irrigation scheduling, and the second requires well-developed water market institutions that provide incentives to bid true valuation of water permits.

  7. The effects of restaurant menu calorie labeling on hypothetical meal choices of females with disordered eating.

    Science.gov (United States)

    Haynos, Ann F; Roberto, Christina A

    2017-03-01

    Concerns have been raised that obesity public policy measures may have harmful effects on individuals with eating disorders. However, little research has investigated this topic. We examined the impact of a popular obesity public policy, menu calorie labeling, on hypothetical food choices of women with disordered eating. Seven hundred sixteen adult females completed an online survey in which they were randomly assigned to receive a restaurant menu with or without calorie information listed. Participants selected foods representative of a meal they would choose to consume and answered questions on restaurant ordering and menu labeling. Participants completed the Eating Disorder Examination Questionnaire (Fairburn & Beglin, ) to assess global eating pathology. Diagnoses of anorexia nervosa (AN), bulimia nervosa (BN), and binge-eating disorder (BED) were also derived from this measure. Generalized linear modeling examined the impact of menu label condition, disordered eating, and the menu label by disordered eating interaction on hypothetical food selection and related variables. When disordered eating was examined continuously, menu labeling did not differentially affect food selections of those with elevated disordered eating (p = .45). However, when examined by eating disorder diagnosis, participants with AN or BN ordered significantly fewer (p < .001) and participants with BED ordered significantly more (p = .001) calories in the menu label versus no label condition. Menu labeling may decrease the calories ordered among individuals with AN or BN and increase calories ordered among individuals with BED. © 2017 Wiley Periodicals, Inc.

  8. The compatibility heuristic in non-categorical hypothetical reasoning: inferences between conditionals and disjunctions.

    Science.gov (United States)

    Espino, Orlando; Byrne, Ruth M J

    2013-11-01

    A new theory explains how people make hypothetical inferences from a premise consistent with several alternatives to a conclusion consistent with several alternatives. The key proposal is that people rely on a heuristic that identifies compatible possibilities. It is tested in 7 experiments that examine inferences between conditionals and disjunctions. Participants accepted inferences between conditionals and inclusive disjunctions when a compatible possibility was immediately available, in their binary judgments that a conclusion followed or not (Experiment 1a) and ternary judgments that included it was not possible to know (Experiment 1b). The compatibility effect was amplified when compatible possibilities were more readily available, e.g., for 'A only if B' conditionals (Experiment 2). It was eliminated when compatible possibilities were not available, e.g., for 'if and only if A B' bi-conditionals and exclusive disjunctions (Experiment 3). The compatibility heuristic occurs even for inferences based on implicit negation e.g., 'A or B, therefore if C D' (Experiment 4), and between universals 'All A's are B's' and disjunctions (Experiment 5a) and universals and conditionals (Experiment 5b). The implications of the results for alternative theories of the cognitive processes underlying hypothetical deductions are discussed. Copyright © 2013. Published by Elsevier Inc.

  9. Potential radiological exposure rates resulting from hypothetical dome failure at Tank W-10

    International Nuclear Information System (INIS)

    1994-07-01

    The main plant area at Oak Ridge National Laboratory (ORNL) contains 12 buried Gunite tanks that were used for the storage and transfer of liquid radioactive waste. Although the tanks are no longer in use, they are known to contain some residual contaminated sludges and liquids. In the event of an accidental tank dome failure, however unlikely, the liquids, sludges, and radioactive contaminants within the tank walls themselves could create radiation fields and result in above-background exposures to workers nearby. This Technical Memorandum documents a series of calculations to estimate potential radiological exposure rates and total exposures to workers in the event of a hypothetical collapse of a Gunite tank dome. Calculations were performed specifically for tank W-10 because it contains the largest radioactivity inventory (approximately half of the total activity) of all the Gunite tanks. These calculations focus only on external, direct gamma exposures for prescribed, hypothetical exposure scenarios and do not address other possible tank failure modes or routes of exposure. The calculations were performed with established, point-kernel gamma ray modeling codes

  10. Hypothetical Case and Scenario Description for International Transportation of Spent Nuclear Fuel.

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Adam David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Osborn, Douglas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Katherine A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kalinina, Elena Arkadievna [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Cohn, Brian [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Thomas, Maikael A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Parks, Mancel Jordan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Parks, Ethan Rutledge [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mohagheghi, Amir H. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-12-01

    To support more rigorous analysis on global security issues at Sandia National Laboratories (SNL), there is a need to develop realistic data sets without using "real" data or identifying "real" vulnerabilities, hazards or geopolitically embarrassing shortcomings. In response, an interdisciplinary team led by subject matter experts in SNL's Center for Global Security and Cooperation (CGSC) developed a hypothetical case description. This hypothetical case description assigns various attributes related to international SNF transportation that are representative, illustrative and indicative of "real" characteristics of "real" countries. There is no intent to identify any particular country and any similarity with specific real-world events is purely coincidental. To support the goal of this report to provide a case description (and set of scenarios of concern) for international SNF transportation inclusive of as much "real-world" complexity as possible -- without crossing over into politically sensitive or classified information -- this SAND report provides a subject matter expert-validated (and detailed) description of both technical and political influences on the international transportation of spent nuclear fuel. [PAGE INTENTIONALLY LEFT BLANK

  11. Reinforcing value and hypothetical behavioral economic demand for food and their relation to BMI.

    Science.gov (United States)

    Epstein, Leonard H; Paluch, Rocco A; Carr, Katelyn A; Temple, Jennifer L; Bickel, Warren K; MacKillop, James

    2018-04-01

    Food is a primary reinforcer, and food reinforcement is related to obesity. The reinforcing value of food can be measured by establishing how hard someone will work to get food on progressive-ratio schedules. An alternative way to measure food reinforcement is a hypothetical purchase task which creates behavioral economic demand curves. This paper studies whether reinforcing value and hypothetical behavioral demand approaches are assessing the same or unique aspects of food reinforcement for low (LED) and high (HED) energy density foods using a combination of analytic approaches in females of varying BMI. Results showed absolute reinforcing value for LED and HED foods and relative reinforcing value were related to demand intensity (r's = 0.20-0.30, p's demand elasticity (r's = 0.17-0.22, p's demand task, and the differential role of effort in the two tasks. Examples of how a better understanding of food reinforcement may be useful to prevent or treat obesity are discussed, including engaging in alternative non-food reinforcers as substitutes for food, such as crafts or socializing in a non-food environment, and reducing the value of immediate food reinforcers by episodic future thinking. Copyright © 2018. Published by Elsevier Ltd.

  12. Hypothetical model of factors determining performance and sports achievement in team sports

    Directory of Open Access Journals (Sweden)

    Trninić Marko

    2011-01-01

    Full Text Available The objective of this paper is formation of a comprehensive hypothetical dynamic interactional process model structured by assumed constructs, i.e. processes or mechanisms that obtain real features and influences on athlete's performance and athletic achievement. Thus there are formed and assumed reciprocal relations between high training and competition - based stress as the input variable, cognitive appraisal and interpretation as the mediator, and mood state as the moderator based on the development of the dynamic systems theory. Also, proposed model uses basic assumptions of the Action-Theory approach and it is in accordance with the contemporary socialcognitive view of team functioning in sports. Within the process model, the output variables are measures of efficacy evident through athlete's individual and team performance and athletic achievement. The situation, the team and athlete attributes, the performance and the athletic achievement are joined variables, and the individual and the collective efficacy are the consequence of their reciprocal interaction. Therefore, there are complex and reciprocal interactive processes in real sports and explorative situations amongst the attributes of athlete and team and the behaviour and situation that determine performance and athletic achievement. This is probably the result of an integrated network of reciprocal multi-causal activity of a set of stated assumed constructs from different theories. Thus the hypothetical model is an effort to describe elaborate correlations and/or interdependencies between internal and external determinants which presumably affect athlete's performance and athletic achievement.

  13. Comparative analysis of chemical similarity methods for modular natural products with a hypothetical structure enumeration algorithm.

    Science.gov (United States)

    Skinnider, Michael A; Dejong, Chris A; Franczak, Brian C; McNicholas, Paul D; Magarvey, Nathan A

    2017-08-16

    Natural products represent a prominent source of pharmaceutically and industrially important agents. Calculating the chemical similarity of two molecules is a central task in cheminformatics, with applications at multiple stages of the drug discovery pipeline. Quantifying the similarity of natural products is a particularly important problem, as the biological activities of these molecules have been extensively optimized by natural selection. The large and structurally complex scaffolds of natural products distinguish their physical and chemical properties from those of synthetic compounds. However, no analysis of the performance of existing methods for molecular similarity calculation specific to natural products has been reported to date. Here, we present LEMONS, an algorithm for the enumeration of hypothetical modular natural product structures. We leverage this algorithm to conduct a comparative analysis of molecular similarity methods within the unique chemical space occupied by modular natural products using controlled synthetic data, and comprehensively investigate the impact of diverse biosynthetic parameters on similarity search. We additionally investigate a recently described algorithm for natural product retrobiosynthesis and alignment, and find that when rule-based retrobiosynthesis can be applied, this approach outperforms conventional two-dimensional fingerprints, suggesting it may represent a valuable approach for the targeted exploration of natural product chemical space and microbial genome mining. Our open-source algorithm is an extensible method of enumerating hypothetical natural product structures with diverse potential applications in bioinformatics.

  14. Changes in adolescents' conflict responses associated with consecutive presentation of hypothetical conflict situations.

    Science.gov (United States)

    Johnson, H D; LaVoie, J C; Eggenburg, E; Mahoney, M A; Pounds, L

    2001-10-01

    The advantages of using hypothetical situations are one reason they have been widely used to examine adolescents' responses to conflict situations. One frequently used research protocol involves presenting several conflict scenarios to participants during a single session. However, in real-life situations multiple conflicts rarely occur within short periods of time, and the nature of this presentation may be associated with changes in adolescents' reports of conflict behaviors. Trend analyses of emotional, conflict goal, and conflict tactic responses from grade 8, 10, 12, and college students to consecutively presented conflict situations showed that responses were associated with presentation of the hypothetical situations. Findings revealed an increase in reports of assertive conflict behaviors and a decrease in reports of constructive conflict behaviors with successive situation presentation. Results from the current study suggest that researchers must consider trends in responses when examining findings from successive situation presentation methodologies because adolescent reports of conflict behavior may change as situation presentation proceeds. Copyright 2001 The Association for Professionals in Services for Adolescents.

  15. OPPORTUNITY COSTS OF REWARD DELAYS AND THE DISCOUNTING OF HYPOTHETICAL MONEY AND CIGARETTES

    Science.gov (United States)

    Johnson, Patrick S.; Herrmann, Evan S.; Johnson, Matthew W.

    2015-01-01

    Humans are reported to discount delayed rewards at lower rates than nonhumans. However, nonhumans are studied in tasks that restrict reinforcement during delays, whereas humans are typically studied in tasks that do not restrict reinforcement during delays. In nonhuman tasks, the opportunity cost of restricted reinforcement during delays may increase delay discounting rates. The present within-subjects study used online crowdsourcing (Amazon Mechanical Turk, or MTurk) to assess the discounting of hypothetical delayed money (and cigarettes in smokers) under four hypothetical framing conditions differing in the availability of reinforcement during delays. At one extreme, participants were free to leave their computer without returning, and engage in any behavior during reward delays (modeling typical human tasks). At the opposite extreme, participants were required to stay at their computer and engage in little other behavior during reward delays (modeling typical nonhuman tasks). Discounting rates increased as an orderly function of opportunity cost. Results also indicated predominantly hyperbolic discounting, the “magnitude effect,” steeper discounting of cigarettes than money, and positive correlations between discounting rates of these commodities. This is the first study to test the effects of opportunity costs on discounting, and suggests that procedural differences may partially account for observed species differences in discounting. PMID:25388973

  16. Conceptualization of a hypothetical high-level nuclear waste repository site in unsaturated, fractured tuff

    International Nuclear Information System (INIS)

    Parsons, A.M.; Olague, N.E.; Gallegos, D.P.

    1991-01-01

    Under the sponsorship of the US Nuclear Regulatory Commission (NRC), Sandia National Laboratories (SNL) is developing a performance assessment methodology for the analysis of long-term disposal and isolation of high-level nuclear wastes (HLW) in alternative geologic media. As part of this exercise, SNL created a conceptualization of ground-water flow and radionuclide transport in the far field of a hypothetical HLW repository site located in unsaturated, fractured tuff formations. This study provides a foundation for the development of conceptual mathematical, and numerical models to be used in this performance assessment methodology. This conceptualization is site specific in terms of geometry, the regional ground-water flow system, stratigraphy, and structure in that these are based on information from Yucca Mountain located on the Nevada Test Site. However, in terms of processes in unsaturated, fractured, porous media, the model is generic. This report also provides a review and evaluation of previously proposed conceptual models of unsaturated and saturated flow and solute transport. This report provides a qualitative description of a hypothetical HLW repository site in fractured tuff. However, evaluation of the current knowledge of flow and transport at Yucca Mountain does not yield a single conceptual model. Instead, multiple conceptual models are possible given the existing information

  17. Potential radiological exposure rates resulting from hypothetical dome failure at Tank W-10

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    The main plant area at Oak Ridge National Laboratory (ORNL) contains 12 buried Gunite tanks that were used for the storage and transfer of liquid radioactive waste. Although the tanks are no longer in use, they are known to contain some residual contaminated sludges and liquids. In the event of an accidental tank dome failure, however unlikely, the liquids, sludges, and radioactive contaminants within the tank walls themselves could create radiation fields and result in above-background exposures to workers nearby. This Technical Memorandum documents a series of calculations to estimate potential radiological exposure rates and total exposures to workers in the event of a hypothetical collapse of a Gunite tank dome. Calculations were performed specifically for tank W-10 because it contains the largest radioactivity inventory (approximately half of the total activity) of all the Gunite tanks. These calculations focus only on external, direct gamma exposures for prescribed, hypothetical exposure scenarios and do not address other possible tank failure modes or routes of exposure. The calculations were performed with established, point-kernel gamma ray modeling codes.

  18. Conceptualization of a hypothetical high-level nuclear waste repository site in unsaturated, fractured tuff

    Energy Technology Data Exchange (ETDEWEB)

    Parsons, A.M.; Olague, N.E.; Gallegos, D.P. [Sandia National Labs., Albuquerque, NM (USA)

    1991-01-01

    Under the sponsorship of the US Nuclear Regulatory Commission (NRC), Sandia National Laboratories (SNL) is developing a performance assessment methodology for the analysis of long-term disposal and isolation of high-level nuclear wastes (HLW) in alternative geologic media. As part of this exercise, SNL created a conceptualization of ground-water flow and radionuclide transport in the far field of a hypothetical HLW repository site located in unsaturated, fractured tuff formations. This study provides a foundation for the development of conceptual mathematical, and numerical models to be used in this performance assessment methodology. This conceptualization is site specific in terms of geometry, the regional ground-water flow system, stratigraphy, and structure in that these are based on information from Yucca Mountain located on the Nevada Test Site. However, in terms of processes in unsaturated, fractured, porous media, the model is generic. This report also provides a review and evaluation of previously proposed conceptual models of unsaturated and saturated flow and solute transport. This report provides a qualitative description of a hypothetical HLW repository site in fractured tuff. However, evaluation of the current knowledge of flow and transport at Yucca Mountain does not yield a single conceptual model. Instead, multiple conceptual models are possible given the existing information.

  19. Quadratic reactivity fuel cycle model

    International Nuclear Information System (INIS)

    Lewins, J.D.

    1985-01-01

    For educational purposes it is highly desirable to provide simple yet realistic models for fuel cycle and fuel economy. In particular, a lumped model without recourse to detailed spatial calculations would be very helpful in providing the student with a proper understanding of the purposes of fuel cycle calculations. A teaching model for fuel cycle studies based on a lumped model assuming the summability of partial reactivities with a linear dependence of reactivity usefully illustrates fuel utilization concepts. The linear burnup model does not satisfactorily represent natural enrichment reactors. A better model, showing the trend of initial plutonium production before subsequent fuel burnup and fission product generation, is a quadratic fit. The study of M-batch cycles, reloading 1/Mth of the core at end of cycle, is now complicated by nonlinear equations. A complete account of the asymptotic cycle for any order of M-batch refueling can be given and compared with the linear model. A complete account of the transient cycle can be obtained readily in the two-batch model and this exact solution would be useful in verifying numerical marching models. It is convenient to treat the parabolic fit rho = 1 - tau 2 as a special case of the general quadratic fit rho = 1 - C/sub tau/ - (1 - C)tau 2 in suitably normalized reactivity and cycle time units. The parabolic results are given in this paper

  20. Reactive nitrogen impacts on ecosystem services

    Science.gov (United States)

    The Ecosystem Services Research Program (ESRP) is a new, multi-year research initiative under development by the Environmental Protection Agency (EPA). As one of its components, ESRP has chosen to focus on reactive Nitrogen (Nr) for stressor-specific ecosystem research through a...

  1. Generalized Riemann problem for reactive flows

    International Nuclear Information System (INIS)

    Ben-Artzi, M.

    1989-01-01

    A generalized Riemann problem is introduced for the equations of reactive non-viscous compressible flow in one space dimension. Initial data are assumed to be linearly distributed on both sides of a jump discontinuity. The resolution of the singularity is studied and the first-order variation (in time) of flow variables is given in exact form. copyright 1989 Academic Press, Inc

  2. Large scale experiments simulating hydrogen distribution in a spent fuel pool building during a hypothetical fuel uncovery accident scenario

    Energy Technology Data Exchange (ETDEWEB)

    Mignot, Guillaume; Paranjape, Sidharth; Paladino, Domenico; Jaeckel, Bernd; Rydl, Adolf [Paul Scherrer Institute, Villigen (Switzerland)

    2016-08-15

    Following the Fukushima accident and its extended station blackout, attention was brought to the importance of the spent fuel pools' (SFPs) behavior in case of a prolonged loss of the cooling system. Since then, many analytical works have been performed to estimate the timing of hypothetical fuel uncovery for various SFP types. Experimentally, however, little was done to investigate issues related to the formation of a flammable gas mixture, distribution, and stratification in the SFP building itself and to some extent assess the capability for the code to correctly predict it. This paper presents the main outcomes of the Experiments on Spent Fuel Pool (ESFP) project carried out under the auspices of Swissnuclear (Framework 2012–2013) in the PANDA facility at the Paul Scherrer Institut in Switzerland. It consists of an experimental investigation focused on hydrogen concentration build-up into a SFP building during a predefined scaled scenario for different venting positions. Tests follow a two-phase scenario. Initially steam is released to mimic the boiling of the pool followed by a helium/steam mixture release to simulate the deterioration of the oxidizing spent fuel. Results shows that while the SFP building would mainly be inerted by the presence of a high concentration of steam, the volume located below the level of the pool in adjacent rooms would maintain a high air content. The interface of the two-gas mixture presents the highest risk of flammability. Additionally, it was observed that the gas mixture could become stagnant leading locally to high hydrogen concentration while steam condenses. Overall, the experiments provide relevant information for the potentially hazardous gas distribution formed in the SFP building and hints on accident management and on eventual retrofitting measures to be implemented in the SFP building.

  3. Environmental issues of repository licensing: an evaluation of a hypothetical high-level radioactive waste repository

    International Nuclear Information System (INIS)

    Owen, J.L.; McGinnis, J.T.; Harper, C.M.; Battelle Columbus Labs., OH)

    1982-01-01

    This paper presents results of an environmental assessment conducted under the direction of the Office of Nuclear Waste Isolation as part of the National Waste Terminal Storage program. The study defined a range of potential environmental effects of constructing, operating, decommissioning, and long-term isolation of a nuclear waste repository. The analytical methodology used to determine potential environmental effects required definition of a hypothetical environmental setting and repository. Potentially applicable regulatory requirements were identified and were used as guidelines to evaluate permitting feasibility. The environmental effects of repository development were analyzed for the two major time periods of concern: short term (the period of construction, operation, and decommissioning) and long term (the isolation period after decommissioning). As a result of this analysis, major environmental uncertainties and issues were identified. 11 references, 5 figures

  4. Performance assessment for a hypothetical low-level waste disposal facility

    International Nuclear Information System (INIS)

    Smith, C.S.; Rohe, M.J.; Ritter, P.D.

    1997-01-01

    Disposing of low-level waste (LLW) is a concern for many states throughout the United States. A common disposal method is below-grade concrete vaults. Performance assessment analyses make predictions of contaminant release, transport, ingestion, inhalation, or other routes of exposure, and the resulting doses for various disposal methods such as the below-grade concrete vaults. Numerous assumptions are required to simplify the processes associated with the disposal facility to make predictions feasible. In general, these assumptions are made conservatively so as to underestimate the performance of the facility. The objective of this report is to describe the methodology used in conducting a performance assessment for a hypothetical waste facility located in the northeastern United States using real data as much as possible. This report consists of the following: (a) a description of the disposal facility and site, (b) methods used to analyze performance of the facility, (c) the results of the analysis, and (d) the conclusions of this study

  5. Preliminary results of consequence assessment of a hypothetical severe accident using Thai meteorological data

    Science.gov (United States)

    Silva, K.; Lawawirojwong, S.; Promping, J.

    2017-06-01

    Consequence assessment of a hypothetical severe accident is one of the important elements of the risk assessment of a nuclear power plant. It is widely known that the meteorological conditions can significantly influence the outcomes of such assessment, since it determines the results of the calculation of the radionuclide environmental transport. This study aims to assess the impacts of the meteorological conditions to the results of the consequence assessment. The consequence assessment code, OSCAAR, of Japan Atomic Energy Agency (JAEA) is used for the assessment. The results of the consequence assessment using Thai meteorological data are compared with those using Japanese meteorological data. The Thai case has following characteristics. Low wind speed made the radionuclides concentrate at the center comparing to the Japanese case. The squalls induced the peaks in the ground concentration distribution. The evacuated land is larger than the Japanese case though the relocated land is smaller, which is attributed to the concentration of the radionuclides near the release point.

  6. Modelling of melting and solidification transport phenomena during hypothetical NPP severe accidents

    International Nuclear Information System (INIS)

    Sarler, B.

    1992-01-01

    A physical and mathematical framework to deal with the transport phenomena occuring during melting and solidification of the hypothetical NPP severe accidents is presented. It concentrates on the transient temperature, velocity, and species concentration distributions during such events. The framework is based on the Mixture Continuum Formulation of the components and phases, cast in the boundary-domain integral shape structured by the fundamental solution of the Laplace equation. The formulation could cope with various solid-liquid sub-systems through the inclusion of the specific closure relations. The deduced system of boundary-domain integral equations for conservation of mass, energy, momentum, and species could be solved by the boundary element discrete approximative method. (author) [sl

  7. Radiation dose evaluation for hypothetical accident with transport package containing Iridium-192 source

    International Nuclear Information System (INIS)

    Trontl, K.; Bace, M.; Pevec, D.

    2002-01-01

    The aim of this paper is to evaluate dose rates for a hypothetical accident with transport package containing Iridium-192 source and to design additional shielding necessary for the safe unloading of the container, assuming that during the unloading process the whole contents of a radioactive source is unshielded and that the operation is going to take place at the site where a working area exists in the vicinity of the unloading location. Based on the calculated radiation dose rates, a single arrangement of the additional concrete shields necessary for reduction of the gamma dose rates to the permitted level is proposed. The proposed solution is optimal considering safety on one hand and costs on the other.(author)

  8. Hypothetical Outcome Plots Outperform Error Bars and Violin Plots for Inferences about Reliability of Variable Ordering.

    Science.gov (United States)

    Hullman, Jessica; Resnick, Paul; Adar, Eytan

    2015-01-01

    Many visual depictions of probability distributions, such as error bars, are difficult for users to accurately interpret. We present and study an alternative representation, Hypothetical Outcome Plots (HOPs), that animates a finite set of individual draws. In contrast to the statistical background required to interpret many static representations of distributions, HOPs require relatively little background knowledge to interpret. Instead, HOPs enables viewers to infer properties of the distribution using mental processes like counting and integration. We conducted an experiment comparing HOPs to error bars and violin plots. With HOPs, people made much more accurate judgments about plots of two and three quantities. Accuracy was similar with all three representations for most questions about distributions of a single quantity.

  9. Hypothetical Outcome Plots Outperform Error Bars and Violin Plots for Inferences about Reliability of Variable Ordering.

    Directory of Open Access Journals (Sweden)

    Jessica Hullman

    Full Text Available Many visual depictions of probability distributions, such as error bars, are difficult for users to accurately interpret. We present and study an alternative representation, Hypothetical Outcome Plots (HOPs, that animates a finite set of individual draws. In contrast to the statistical background required to interpret many static representations of distributions, HOPs require relatively little background knowledge to interpret. Instead, HOPs enables viewers to infer properties of the distribution using mental processes like counting and integration. We conducted an experiment comparing HOPs to error bars and violin plots. With HOPs, people made much more accurate judgments about plots of two and three quantities. Accuracy was similar with all three representations for most questions about distributions of a single quantity.

  10. An analysis of reactor structural response to fuel sodium interaction in a hypothetical core disruptive accident

    International Nuclear Information System (INIS)

    Suzuki, K.; Tashiro, M.; Sasanuma, K.; Nagashima, K.

    1976-01-01

    This study shows the effect of constraints around FSI zone on FSI phenomena and deformations of reactor structures. SUGAR-PISCES code system has been developed to evaluate the phenomena of FSI and the response of reactor structure. SUGAR calculates the phenomena of FSI. PISCES, developed by Physics International Company in U.S.A., calculates the dynamic response of reactor structure in two-dimensional, time-dependent finite-difference Lagrangian model. The results show that the peak pressure and energy by FSI and the deformation of reactor structures are about twice in case of FSI zone surrounding by blanket than by coolant. The FSI phenomena highly depend on the reactor structure and the realistic configuration around core must be considered for analyzing hypothetical core disruptive accident. This work was supported by a grant from Power Reactor and Nuclear Fuel Development Corporation. (auth.)

  11. Groundwater flow modeling for near-field of a hypothetical near-surface disposal facility

    International Nuclear Information System (INIS)

    Park, H. Y.; Park, J. W.; Jang, G. M.; Kim, C. R.

    2000-01-01

    For a hypothetical near-surface radioactive disposal facility, the behavior of groundwater flow around the near-field of disposal vault located at the unsaturated zone were analyzed. Three alternative conceptual models proposed as the hydraulic barrier layer design were simulated to assess the hydrologic performance of engineered barriers for the facility. In order to evaluate the seepage possibility of the infiltrated water passed through the final disposal cover after the facility closure, the flow path around and water flux through each disposal vault were compared. The hydrologic parameters variation that accounts for the long-term aging and degradation of the cover and engineered materials was considered in the simulations. The results showed that it is necessary to construct the hydraulic barrier at the upper and sides of the vault, and that, for this case, achieving design hydraulic properties of bentonite/sand mixture barrier in the as-built condition is crucial to limit the seepage into the waste

  12. Important radionuclides and their sensitivity for groundwater pathway of a hypothetical near-surface disposal facility

    Energy Technology Data Exchange (ETDEWEB)

    Park, J. W.; Chang, K.; Kim, C. L. [Nuclear Enviroment Technology Institute, Taejon (Korea, Republic of)

    2001-04-01

    A radiological safety assessment was performed for a hypothetical near-surface radioactive waste repository as a simple screening calculation to identify important nuclides and to provide insights on the data needs for a successful demonstration of compliance. Individual effective doses were calculated for a conservative groundwater pathway scenario considering well drilling near the site boundary. Sensitivity of resulting ingestion dose to input parameter values was also analyzed using Monte Carlo sampling. Considering peak dose rate and assessment timescale, C-14 and I-129 were identified as important nuclides and U-235 and U-238 as potentially important nuclides. For C-14, the does was most sensitive to Darcy velocity in aquifer. The distribution coefficient showed high degree of sensitivity for I-129 release.

  13. Important radionuclides and their sensitivity for groundwater pathway of a hypothetical near-surface disposal facility

    International Nuclear Information System (INIS)

    Park, J. W.; Chang, K.; Kim, C. L.

    2001-01-01

    A radiological safety assessment was performed for a hypothetical near-surface radioactive waste repository as a simple screening calculation to identify important nuclides and to provide insights on the data needs for a successful demonstration of compliance. Individual effective doses were calculated for a conservative groundwater pathway scenario considering well drilling near the site boundary. Sensitivity of resulting ingestion dose to input parameter values was also analyzed using Monte Carlo sampling. Considering peak dose rate and assessment timescale, C-14 and I-129 were identified as important nuclides and U-235 and U-238 as potentially important nuclides. For C-14, the does was most sensitive to Darcy velocity in aquifer. The distribution coefficient showed high degree of sensitivity for I-129 release

  14. Assessment of Loads and Performance of a Containment in a Hypothetical Accident (ALPHA). Facility design report

    International Nuclear Information System (INIS)

    Yamano, Norihiro; Maruyama, Yu; Kudo, Tamotsu; Moriyama, Kiyofumi; Ito, Hideo; Komori, Keiichi; Sonobe, Hisao; Sugimoto, Jun

    1998-06-01

    In the ALPHA (Assessment of Loads and Performance of Containment in Hypothetical Accident) program, several tests have been performed to quantitatively evaluate loads to and performance of a containment vessel during a severe accident of a light water reactor. The ALPHA program focuses on investigating leak behavior through the containment vessel, fuel-coolant interaction, molten core-concrete interaction and FP aerosol behavior, which are generally recognized as significant phenomena considered to occur in the containment. In designing the experimental facility, it was considered to simulate appropriately the phenomena mentioned above, and to cover experimental conditions not covered by previous works involving high pressure and temperature. Experiments from the viewpoint of accident management were also included in the scope. The present report describes design specifications, dimensions, instrumentation of the ALPHA facility based on the specific test objectives and procedures. (author)

  15. Consequence analyses of hypothetical accidents of high temperature gas-cooled reactors. Pt. 2/3

    International Nuclear Information System (INIS)

    Mueller, A.; Badur, A.

    1978-06-01

    With regard to a hypothetical accident which is characterized by the rupture of the primary circuit and by the additional failure of active engineered safeguards, the fission product release resulting from the unlimited core heat-up is analyzed. The applied models are explained and the data base being used is documented. The generally conservative treatment yields pessimistic activity release rates into the containment. The results show in particular that spontaneous massive fission product release does not occur. The time-dependency of the activity release from the fuel elements, the primary circuit and at last from the containment leads to a time delay in the range of at least several hours, before the environmental radiation load is raised. Ultimately the maximum radiation load itself proves relatively favourable. (orig.) 891 HP [de

  16. Hypothetical accidents of light-water moderated nuclear power plants in the framework of emergency planning

    International Nuclear Information System (INIS)

    1979-07-01

    Hypothetical accidents in nuclear power plants are events which by definition can have a devastating impact on the surroundings of the plant. Apart from an adequate plant design, the protection of the population in case of an accident is covered by the emergency planning. Of major importance are the measures for the short-term emergency protection. The decision on whether these measures are applied has to be based on appropriate measurements within the plant. The aim and achieved result of this investigation is to specify accident types. They serve as operational decision making criteria to determine the necessary measurements for analysing the accident in the accident situation, and to provide indications for choosing the suitable strategy for the protection measures. (orig.) [de

  17. Performance assessment for a hypothetical low-level waste disposal facility

    Energy Technology Data Exchange (ETDEWEB)

    Smith, C.S.; Rohe, M.J.; Ritter, P.D. [and others

    1997-01-01

    Disposing of low-level waste (LLW) is a concern for many states throughout the United States. A common disposal method is below-grade concrete vaults. Performance assessment analyses make predictions of contaminant release, transport, ingestion, inhalation, or other routes of exposure, and the resulting doses for various disposal methods such as the below-grade concrete vaults. Numerous assumptions are required to simplify the processes associated with the disposal facility to make predictions feasible. In general, these assumptions are made conservatively so as to underestimate the performance of the facility. The objective of this report is to describe the methodology used in conducting a performance assessment for a hypothetical waste facility located in the northeastern United States using real data as much as possible. This report consists of the following: (a) a description of the disposal facility and site, (b) methods used to analyze performance of the facility, (c) the results of the analysis, and (d) the conclusions of this study.

  18. MCCI study for Pressurized Heavy Water Reactor under hypothetical accident condition

    International Nuclear Information System (INIS)

    Verma, Vishnu; Mukhopadhyay, Deb; Chatterjee, B.; Singh, R.K.; Vaze, K.K.

    2011-01-01

    In case of severe core damage accident in Pressurized Heavy Water Reactor (PHWR), large amount of molten corium is expected to come out into the calandria vault due to failure of calandria vessel. Molten corium at high temperature is sufficient to decompose and ablate concrete. Such attack could fail CV by basement penetration. Since containment is ultimate barrier for activity release. The Molten Core Concrete Interaction (MCCI) of the resulting pool of debris with the concrete has been identified as an important part of the accident sequence. MCCI Analysis has been carried out for PHWR for a hypothetical accident condition where total core material is considered to be relocated in calandria vault. Concrete ablation rate in vertical and radial direction is evaluated for rectangular geometry using MEDICIS module of ASTEC Code. Amount of gases released during MCCI is also evaluated. (author)

  19. Digital reactivity meter

    International Nuclear Information System (INIS)

    Jiang Zongbing

    1996-02-01

    The importance and the usual methods of reactivity measurement in a nuclear reactor are presented. Emphasis is put upon the calculation principle, software and hardware components, main specifications, application, as well as the features of the digital reactivity meter. The test results of operation in various reactors shown that the meter possess the following features: high accuracy, short response time, low output noise, high resolution, wide measuring range, simple and flexible to operate, high stability and reliability. In addition, the reactivity meter can save the measuring data automatically and have a perfect capability of self-verifying. It not only meet the requirement of the reactivity measurement in nuclear power plant, but also can be applied to various types of reactors. (1 tab.)

  20. Stress Reactivity in Insomnia.

    Science.gov (United States)

    Gehrman, Philip R; Hall, Martica; Barilla, Holly; Buysse, Daniel; Perlis, Michael; Gooneratne, Nalaka; Ross, Richard J

    2016-01-01

    This study examined whether individuals with primary insomnia (PI) are more reactive to stress than good sleepers (GS). PI and GS (n = 20 per group), matched on gender and age, completed three nights of polysomnography. On the stress night, participants received a mild electric shock and were told they could receive additional shocks during the night. Saliva samples were obtained for analysis of cortisol and alpha amylase along with self-report and visual analog scales (VAS). There was very little evidence of increased stress on the stress night, compared to the baseline night. There was also no evidence of greater stress reactivity in the PI group for any sleep or for salivary measures. In the GS group, stress reactivity measured by VAS scales was positively associated with an increase in sleep latency in the experimental night on exploratory analyses. Individuals with PI did not show greater stress reactivity compared to GS.

  1. Structure, Reactivity and Dynamics

    Indian Academy of Sciences (India)

    Understanding structure, reactivity and dynamics is the core issue in chemical ... functional theory (DFT) calculations, molecular dynamics (MD) simulations, light- ... between water and protein oxygen atoms, the superionic conductors which ...

  2. Testing and intercomparison of model predictions of radionuclide migration from a hypothetical area source

    International Nuclear Information System (INIS)

    O'Brien, R.S.; Yu, C.; Zeevaert, T.; Olyslaegers, G.; Amado, V.; Setlow, L.W.; Waggitt, P.W.

    2008-01-01

    This work was carried out as part of the International Atomic Energy Agency's EMRAS program. One aim of the work was to develop scenarios for testing computer models designed for simulating radionuclide migration in the environment, and to use these scenarios for testing the models and comparing predictions from different models. This paper presents the results of the development and testing of a hypothetical area source of NORM waste/residue using two complex computer models and one screening model. There are significant differences in the methods used to model groundwater flow between the complex models. The hypothetical source was used because of its relative simplicity and because of difficulties encountered in finding comprehensive, well-validated data sets for real sites. The source consisted of a simple repository of uniform thickness, with 1 Bq g -1 of uranium-238 ( 238 U) (in secular equilibrium with its decay products) distributed uniformly throughout the waste. These approximate real situations, such as engineered repositories, waste rock piles, tailings piles and landfills. Specification of the site also included the physical layout, vertical stratigraphic details, soil type for each layer of material, precipitation and runoff details, groundwater flow parameters, and meteorological data. Calculations were carried out with and without a cover layer of clean soil above the waste, for people working and living at different locations relative to the waste. The predictions of the two complex models showed several differences which need more detailed examination. The scenario is available for testing by other modelers. It can also be used as a planning tool for remediation work or for repository design, by changing the scenario parameters and running the models for a range of different inputs. Further development will include applying models to real scenarios and integrating environmental impact assessment methods with the safety assessment tools currently

  3. The multiple roles of hypothetical gene BPSS1356 in Burkholderia pseudomallei.

    Directory of Open Access Journals (Sweden)

    Hokchai Yam

    Full Text Available Burkholderia pseudomallei is an opportunistic pathogen and the causative agent of melioidosis. It is able to adapt to harsh environments and can live intracellularly in its infected hosts. In this study, identification of transcriptional factors that associate with the β' subunit (RpoC of RNA polymerase was performed. The N-terminal region of this subunit is known to trigger promoter melting when associated with a sigma factor. A pull-down assay using histidine-tagged B. pseudomallei RpoC N-terminal region as bait showed that a hypothetical protein BPSS1356 was one of the proteins bound. This hypothetical protein is conserved in all B. pseudomallei strains and present only in the Burkholderia genus. A BPSS1356 deletion mutant was generated to investigate its biological function. The mutant strain exhibited reduced biofilm formation and a lower cell density during the stationary phase of growth in LB medium. Electron microscopic analysis revealed that the ΔBPSS1356 mutant cells had a shrunken cytoplasm indicative of cell plasmolysis and a rougher surface when compared to the wild type. An RNA microarray result showed that a total of 63 genes were transcriptionally affected by the BPSS1356 deletion with fold change values of higher than 4. The expression of a group of genes encoding membrane located transporters was concurrently down-regulated in ΔBPSS1356 mutant. Amongst the affected genes, the putative ion transportation genes were the most severely suppressed. Deprivation of BPSS1356 also down-regulated the transcriptions of genes for the arginine deiminase system, glycerol metabolism, type III secretion system cluster 2, cytochrome bd oxidase and arsenic resistance. It is therefore obvious that BPSS1356 plays a multiple regulatory roles on many genes.

  4. Simulation and dose analysis of a hypothetical accident in Sanmen nuclear power plant

    International Nuclear Information System (INIS)

    Zhu, Yangmo; Guo, Jianghua; Nie, Chu; Zhou, Youhua

    2014-01-01

    Highlights: • Atmospheric dispersion following a hypothetical accident in Sanmen NPP is simulated. • Japan, North Korea and Russia are slightly influenced in this accident. • In Taiwan and South Korea, population on 100% and 35% of the land should be given information about reducing dose. • In mainland China, about 284 thousand people are likely to get cancer. - Abstract: In November 2013, an AP1000 nuclear power plant (NPP) will be put into commercial operation. An atmospheric dispersion of radionuclides during a severe hypothetical accident in Sanmen NPP, Zhejiang province, China, is simulated with a Lagrangian particle dispersion model FLEXPART. The accident assumes that a station blackout (SBO) accident occurred on August 25, 2011, 55% core was damaged and 49 radionuclides were released into the atmosphere. Our simulation indicates that, during this dispersion, the radioactive plume will cover the mainland China, Taiwan, Japan, North Korea, South Korea and Russia. The radiation dose levels in Japan, North Korea and Russia are the lightest, usually less than 1 mSv. The influenced areas in these countries are 9901 km 2 , 31,736 km 2 and 2,97,524 km 2 , respectively; dose levels in Taiwan and South Korea are moderate, no more than 20 mSv. Information about reducing dose should be given to the public. Total influenced areas in these two countries are 3621 km 2 and 42,370 km 2 , which take up 100% of the land in Taiwan and 35% of the land in South Korea; the worst situation happens in mainland China. The total influenced area is 3 × 106 km 2 and 1,40,000 km 2 in this area has a dose level higher than 20 mSv. Measurement must be taken to reduce the dose. More than 284 thousand residents will face the risk of developing cancer. Furthermore, 96% of this population is mainly concentrated in Zhejiang province, where Sanmen NPP locates

  5. Molecular Characterization and Immune Protection of a New Conserved Hypothetical Protein of Eimeria tenella.

    Directory of Open Access Journals (Sweden)

    Qi Zhai

    Full Text Available The genome sequences of Eimeria tenella have been sequenced, but >70% of these genes are currently categorized as having an unknown function or annotated as conserved hypothetical proteins, and few of them have been studied. In the present study, a conserved hypothetical protein gene of E. tenella, designated EtCHP559, was cloned using rapid amplification of cDNA 5'-ends (5'RACE based on the expressed sequence tag (EST. The 1746-bp full-length cDNA of EtCHP559 contained a 1224-bp open reading frame (ORF that encoded a 407-amino acid polypeptide with the predicted molecular weight of 46.04 kDa. Real-time quantitative PCR analysis revealed that EtCHP559 was expressed at higher levels in sporozoites than in the other developmental stages (unsporulated oocysts, sporulated oocysts and second generation merozoites. The ORF was inserted into pCold-TF to produce recombinant EtCHP559. Using western blotting, the recombinant protein was successfully recognized by rabbit serum against E. tenella sporozoites. Immunolocalization by using EtCHP559 antibody showed that EtCHP559 was mainly distributed on the parasite surface in free sporozoites and became concentrated in the anterior region after sporozoites were incubated in complete medium. The EtCHP559 became uniformly dispersed in immature and mature schizonts. Inhibition of EtCHP559 function using anti-rEtCHP559 polyclonal antibody reduced the ability of E. tenella sporozoites to invade host cells by >70%. Animal challenge experiments demonstrated that the recombinant EtCHP559 significantly increased the average body weight gain, reduced the oocyst outputs, alleviated cecal lesions of the infected chickens, and resulted in anticoccidial index >160 against E. tenella. These results suggest that EtCHP559 plays an important role in sporozoite invasion and could be an effective candidate for the development of a new vaccine against E. tenella.

  6. Geologic simulation model for a hypothetical site in the Columbia Plateau

    International Nuclear Information System (INIS)

    Petrie, G.M.; Zellmer, J.T.; Lindberg, J.W.; Foley, M.G.

    1981-04-01

    This report describes the structure and operation of the Assessment of Effectiveness of Geologic Isolation Systems (AEGIS) Geologic Simulation Model, a computer simulation model of the geology and hydrology of an area of the Columbia Plateau, Washington. The model is used to study the long-term suitability of the Columbia Plateau Basalts for the storage of nuclear waste in a mined repository. It is also a starting point for analyses of such repositories in other geologic settings. The Geologic Simulation Model will aid in formulating design disruptive sequences (i.e. those to be used for more detailed hydrologic, transport, and dose analyses) from the spectrum of hypothetical geological and hydrological developments that could result in transport of radionuclides out of a repository. Quantitative and auditable execution of this task, however, is impossible without computer simulation. The computer simulation model aids the geoscientist by generating the wide spectrum of possible future evolutionary paths of the areal geology and hydrology, identifying those that may affect the repository integrity. This allows the geoscientist to focus on potentially disruptive processes, or series of events. Eleven separate submodels are used in the simulation portion of the model: Climate, Continental Glaciation, Deformation, Geomorphic Events, Hydrology, Magmatic Events, Meteorite Impact, Sea-Level Fluctuations, Shaft-Seal Failure, Sub-Basalt Basement Faulting, and Undetected Features. Because of the modular construction of the model, each submodel can easily be replaced with an updated or modified version as new information or developments in the state of the art become available. The model simulates the geologic and hydrologic systems of a hypothetical repository site and region for a million years following repository decommissioning. The Geologic Simulation Model operates in both single-run and Monte Carlo modes

  7. Computational mining for hypothetical patterns of amino acid side chains in protein data bank (PDB)

    Science.gov (United States)

    Ghani, Nur Syatila Ab; Firdaus-Raih, Mohd

    2018-04-01

    The three-dimensional structure of a protein can provide insights regarding its function. Functional relationship between proteins can be inferred from fold and sequence similarities. In certain cases, sequence or fold comparison fails to conclude homology between proteins with similar mechanism. Since the structure is more conserved than the sequence, a constellation of functional residues can be similarly arranged among proteins of similar mechanism. Local structural similarity searches are able to detect such constellation of amino acids among distinct proteins, which can be useful to annotate proteins of unknown function. Detection of such patterns of amino acids on a large scale can increase the repertoire of important 3D motifs since available known 3D motifs currently, could not compensate the ever-increasing numbers of uncharacterized proteins to be annotated. Here, a computational platform for an automated detection of 3D motifs is described. A fuzzy-pattern searching algorithm derived from IMagine an Amino Acid 3D Arrangement search EnGINE (IMAAAGINE) was implemented to develop an automated method for searching of hypothetical patterns of amino acid side chains in Protein Data Bank (PDB), without the need for prior knowledge on related sequence or structure of pattern of interest. We present an example of the searches, which is the detection of a hypothetical pattern derived from known structural motif of C2H2 structural pattern from zinc fingers. The conservation of particular patterns of amino acid side chains in unrelated proteins is highlighted. This approach can act as a complementary method for available structure- and sequence-based platforms and may contribute in improving functional association between proteins.

  8. Purification and characterization of a thermostable hypothetical xylanase from Aspergillus oryzae HML366.

    Science.gov (United States)

    He, Haiyan; Qin, Yongling; Li, Nan; Chen, Guiguang; Liang, Zhiqun

    2015-03-01

    In the current study, fermentation broth of Aspergillus oryzae HML366 in sugar cane bagasse was subjected to ultrafiltration and ion exchange chromatography, and two xylanases, XynH1 and XynH2, were purified. Time-of-flight mass spectrometry coupled with SDS-PAGE analysis revealed that XynH1 is identical to the hypothetical A. oryzae RIB40 protein XP_001826985.1, with a molecular weight of 33.671 kDa. Likewise, XynH2 was identified as xylanase XynF1 with a molecular weight of 35.402 kDa. Sequence analysis indicated that XynH1 belongs to glycosyl hydrolases family 10. The specific activity of XynH1 was measured at 476.9 U/mg. Optimal xylanase activity was observed at pH 6.0, and enzyme remained active within pH 4.0-10.0 and at a temperature below 70 °C. Mg(2+), Mn(2+), Ca(2+), and K(+) enhanced the XynH1 xylanase activity to 146, 122, 114, and 108%, respectively. XynH1 hydrolyzed Birchwood xylan and Larchwood xylan effectively. The K m and V max of XynH1 values determined were 1.16 mM and 336 μmol/min/mg with Birchwood xylan as the substrate. A. oryzae HML366 xylanase XynH1 showed superior heat and pH tolerance, therefore may have significant applications in paper and biofuel industries. These studies constitute the first investigation of the xylanase activities of the hypothetical protein XP_001826985.1 form A. oryzae.

  9. Comparative analysis of a hypothetical coolant loss accident in an LMFB reactor with the use of various calculation models for a common reference problem

    International Nuclear Information System (INIS)

    Royl, P.

    1979-01-01

    The results of a comparative analysis of the initial and dismantling stages of a hypothetical loss of flow accident in an LMFB reactor are presented. The analyses were made for a common reference problem with four different calculation models (CARMEN/KADIS, SURDYN, CAPRI/KADIS and FRAX). The reference core is described specifically, as are the differences in its geometrical disposition in the models, the static and transient conditions before and after the start of boiling and during dismantling. The differences in the models used for simulating the boiling and the dismantling are compared. The structure of the core, as well as the calculation conditions and hypotheses, were intentionally designed so that the accident would culminate, in all cases, in an energetic hydrodynamic dismantling stage

  10. Reactive sputter deposition

    CERN Document Server

    Mahieu, Stijn

    2008-01-01

    In this valuable work, all aspects of the reactive magnetron sputtering process, from the discharge up to the resulting thin film growth, are described in detail, allowing the reader to understand the complete process. Hence, this book gives necessary information for those who want to start with reactive magnetron sputtering, understand and investigate the technique, control their sputtering process and tune their existing process, obtaining the desired thin films.

  11. Reactive power compensator

    Science.gov (United States)

    El-Sharkawi, Mohamed A.; Venkata, Subrahmanyam S.; Chen, Mingliang; Andexler, George; Huang, Tony

    1992-01-01

    A system and method for determining and providing reactive power compensation for an inductive load. A reactive power compensator (50,50') monitors the voltage and current flowing through each of three distribution lines (52a, 52b, 52c), which are supplying three-phase power to one or more inductive loads. Using signals indicative of the current on each of these lines when the voltage waveform on the line crosses zero, the reactive power compensator determines a reactive power compensator capacitance that must be connected to the lines to maintain a desired VAR level, power factor, or line voltage. Alternatively, an operator can manually select a specific capacitance for connection to each line, or the capacitance can be selected based on a time schedule. The reactive power compensator produces control signals, which are coupled through optical fibers (102/106) to a switch driver (110, 110') to select specific compensation capacitors (112) for connections to each line. The switch driver develops triggering signals that are supplied to a plurality of series-connected solid state switches (350), which control charge current in one direction in respect to ground for each compensation capacitor. During each cycle, current flows from ground to charge the capacitors as the voltage on the line begins to go negative from its positive peak value. The triggering signals are applied to gate the solid state switches into a conducting state when the potential on the lines and on the capacitors reaches a negative peak value, thereby minimizing both the potential difference and across the charge current through the switches when they begin to conduct. Any harmonic distortion on the potential and current carried by the lines is filtered out from the current and potential signals used by the reactive power compensator so that it does not affect the determination of the required reactive compensation.

  12. Reactive power compensator

    Energy Technology Data Exchange (ETDEWEB)

    El-Sharkawi, Mohamed A. (Renton, WA); Venkata, Subrahmanyam S. (Woodinville, WA); Chen, Mingliang (Kirkland, WA); Andexler, George (Everett, WA); Huang, Tony (Seattle, WA)

    1992-01-01

    A system and method for determining and providing reactive power compensation for an inductive load. A reactive power compensator (50,50') monitors the voltage and current flowing through each of three distribution lines (52a, 52b, 52c), which are supplying three-phase power to one or more inductive loads. Using signals indicative of the current on each of these lines when the voltage waveform on the line crosses zero, the reactive power compensator determines a reactive power compensator capacitance that must be connected to the lines to maintain a desired VAR level, power factor, or line voltage. Alternatively, an operator can manually select a specific capacitance for connection to each line, or the capacitance can be selected based on a time schedule. The reactive power compensator produces control signals, which are coupled through optical fibers (102/106) to a switch driver (110, 110') to select specific compensation capacitors (112) for connections to each line. The switch driver develops triggering signals that are supplied to a plurality of series-connected solid state switches (350), which control charge current in one direction in respect to ground for each compensation capacitor. During each cycle, current flows from ground to charge the capacitors as the voltage on the line begins to go negative from its positive peak value. The triggering signals are applied to gate the solid state switches into a conducting state when the potential on the lines and on the capacitors reaches a negative peak value, thereby minimizing both the potential difference and across the charge current through the switches when they begin to conduct. Any harmonic distortion on the potential and current carried by the lines is filtered out from the current and potential signals used by the reactive power compensator so that it does not affect the determination of the required reactive compensation.

  13. Actinide and Xenon reactivity effects in ATW high flux systems

    International Nuclear Information System (INIS)

    Woosley, M.; Olson, K.; Henderson, D.L.

    1995-01-01

    In this paper, initial system reactivity response to flux changes caused by the actinides and xenon are investigated separately for a high flux ATW system. The maximum change in reactivity after a flux change due to the effect of the changing quantities of actinides is generally at least two orders of magnitude smaller than either the positive or negative reactivity effect associated with xenon after a shutdown or start-up. In any transient flux event, the reactivity response of the system to xenon will generally occlude the response due to the actinides

  14. Actinide and xenon reactivity effects in ATW high flux systems

    International Nuclear Information System (INIS)

    Woosley, M.; Olson, K.; Henderson, D. L.; Sailor, W. C.

    1995-01-01

    In this paper, initial system reactivity response to flux changes caused by the actinides and xenon are investigated separately for a high flux ATW system. The maximum change in reactivity after a flux change due to the effect of the changing quantities of actinides is generally at least two orders of magnitude smaller than either the positive or negative reactivity effect associated with xenon after a shutdown or start-up. In any transient flux event, the reactivity response of the system to xenon will generally occlude the response due to the actinides

  15. Actinide and Xenon reactivity effects in ATW high flux systems

    Energy Technology Data Exchange (ETDEWEB)

    Woosley, M. [Univ. of Virginia, Charlottesville, VA (United States); Olson, K.; Henderson, D.L. [Univ. of Wisconsin, Madison, WI (United States)] [and others

    1995-10-01

    In this paper, initial system reactivity response to flux changes caused by the actinides and xenon are investigated separately for a high flux ATW system. The maximum change in reactivity after a flux change due to the effect of the changing quantities of actinides is generally at least two orders of magnitude smaller than either the positive or negative reactivity effect associated with xenon after a shutdown or start-up. In any transient flux event, the reactivity response of the system to xenon will generally occlude the response due to the actinides.

  16. Digital reactivity meter

    International Nuclear Information System (INIS)

    Copie, M.; Valantic, B.

    1978-01-01

    Digital reactivity meters (DRM) are mostly used as measuring instruments, e.g. for calibration of control rods, and there are only a few cases of their incorporation into the control systems of the reactors. To move in this direction there is more development work needed. First of all, fast algorithms are needed for inverse kinetics equations to relieve the computer for more important tasks of reactor model solving in real time. The next problem, currently under investigation, is the incorporation of the reactor thermal-hydraulic model into the DRM so that it can be used in the power range. Such an extension of DHM allows presentation not only of the instantaneous reactivity of the system, but also the inserted reactivity can be estimated from the temperature reactivity feed-backs. One of the applications of this concept is the anomalous digital reactivity monitor (ADRN) as part of the reactor protection system. As a solution of the first problem, a fast algorithm for solving the inverse kinetics equations has been implemented in the off-line program RODCAL on CDC 1700 computer and tested for its accuracy by performing different control rod calibrations on the reactor TRIGA

  17. Energy transfer in reactive and non-reactive H2 + OH collisions

    International Nuclear Information System (INIS)

    Rashed, O.; Brown, N.J.

    1985-04-01

    We have used the methods of quasi-classical dynamics to compute energy transfer properties of non-reactive and reactive H 2 + OH collisions. Energy transfer has been investigated as function of translational temperature, reagent rotational energy, and reagent vibrational energy. The energy transfer mechanism is complex with ten types of energy transfer possible, and evidence was found for all types. There is much more exchange between the translational degree of freedom and the H 2 vibrational degree of freedom than there is between translation and OH vibration. Translational energy is transferred to the rotational degrees of freedom of each molecule. There is a greater propensity for the transfer of translation to OH rotation than H 2 rotation. In reactive collisions, increases in reagent translational temperature predominantly appear as vibrational energy in the water molecule. Energy transfer in non-reactive and reactive collisions does not depend strongly on the initial angular momentum in either molecule. In non-reactive collisions, vibrational energy is transferred to translation, to the rotational degree of freedom of the same molecule, and to the rotational and vibrational degrees of freedom of the other molecule. In reactive collisions, the major effect of increasing the vibrational energy in reagent molecules is that, on the average, the vibrational energy of the reagents appears as product vibrational energy. 18 refs., 16 figs., 6 tabs

  18. Energy Extraction from a Hypothetical MHK Array in a Section of the Mississippi River

    Science.gov (United States)

    Barco, J.; James, S. C.; Roberts, J. D.; Jones, C. A.; Jepsen, R. A.

    2010-12-01

    The world is facing many challenges meeting the energy demands for the future. Growing populations and developing economies as well as increasing energy expenditures highlight the need for a spectrum of energy sources. Concerns about pollution and climate change have led to increased interest in all forms of renewable energy to stabilize or decrease consumption of fossil fuels. One promising renewable is marine and hydrokinetic (MHK) energy, which has the potential to make important contributions to energy portfolios of the future. However, a primary question remains: How much energy can be extracted from MHK devices in rivers and oceans without significant environmental effects? This study focuses on the potential energy extraction from different hypothetical MHK array configurations in a section of the Mississippi River located near to Scotlandville Bend, Louisiana. Bathymetry data, obtained from Free Flow Power Corporation (FFP) via the US Army Corps bathymetry survey library, were interpolated onto a DELFT3D curvilinear, orthogonal grid of the system using ArcGIS 9.3.1. Boundary conditions are constrained by the upstream and downstream river flow rates and gage heights obtained from USGS website. Acoustic Doppler Current Profiler (ADCP) measurements obtained from FFP are used for pre-array model validation. Energy extraction is simulated using momentum sinks recently coded into SNL-EFDC, which is an augmented version of US EPA’s Environmental Fluid Dynamics Code (EFDC). SNL-EFDC model includes a new module which considers energy removal by MHK devices and commensurate changes to the turbulent kinetic energy and turbulent kinetic energy dissipation rate. As expected, average velocities decrease downstream of each MHK device due to energy extraction and blunt-body form drag from the MHK support structures. Changes in the flow field can alter sediment transport dynamics around and downstream of an MHK array; various hypothetical scenarios are examined. This

  19. Looking for a hypothetical jovian metabolisms to explain a paucity of ammonia

    Science.gov (United States)

    Wong, M. L.

    2017-12-01

    One startling find from Juno's reconnaissance of Jupiter is a factor-of-two depletion from expected concentrations of NH3 in the 7-bar region of the atmosphere. Here, we investigate hypothetical NH3-consuming metabolisms of putative jovian life. Classically, astrobiologists state life's requirements as: liquid water, sources of CHNOPS, and the availability of free energy. On Jupiter, water clouds condense at a pressure of 7 bars—a region where the temperature is 300 K—providing droplets of liquid water. With its tight gravitational grip on hydrogen, Jupiter has bountiful reductants containing CHNOPS in the form of H2O, CH4, H2S, NH3, and PH3. However, the O-rich oxidants often considered for astrobiological systems on other worlds are largely absent. Instead, hypothetical metabolisms may rely on sulfur species as electron acceptors. Exposed to ultraviolet radiation, H2S will photolyze and react to form polysulfur (Sx, where x ≥ 8). Polysulfur may contribute to the coloration of Jupiter's upper atmosphere, particularly of the Great Red Spot. Polysulfur that rains down to the region of Jupiter's atmosphere where liquid water exists can provide significant redox disequilibrium from which free energy can be liberated. For instance, the reaction 16/3 NH3 + S8 ⟶ 8 H2S + 8/3 N2has a ΔG = -38.8 kJ per mol NH3 at 300 K and 7 bars. This reaction is promising in that: 1) it recycles S8 back to H2S, which can then be lofted to higher altitudes and create more S8; 2) it creates N2, which Juno cannot detect using its microwave radiometer. In order to be a plausible metabolism, we must show: 1) that this reaction is kinetically inhibited, i.e. that abiotic processes cannot easily resolve this disequilibrium; 2) that enough S8 is produced photochemically and is transported to the 7 bar region on short enough timescales to provide the requisite disequilibrium. Finally, copious lightning in the water cloud region—the flash rate has been estimated to be 30 flashes year-1

  20. Atmospheric transport of radioactive debris to Norway in case of a hypothetical accident related to the recovery of the Russian submarine K-27

    International Nuclear Information System (INIS)

    Bartnicki, Jerzy; Amundsen, Ingar; Brown, Justin; Hosseini, Ali; Hov, Øystein; Haakenstad, Hilde; Klein, Heiko; Lind, Ole Christian; Salbu, Brit; Szacinski Wendel, Cato C.; Ytre-Eide, Martin Album

    2016-01-01

    The Russian nuclear submarine K-27 suffered a loss of coolant accident in 1968 and with nuclear fuel in both reactors it was scuttled in 1981 in the outer part of Stepovogo Bay located on the eastern coast of Novaya Zemlya. The inventory of spent nuclear fuel on board the submarine is of concern because it represents a potential source of radioactive contamination of the Kara Sea and a criticality accident with potential for long-range atmospheric transport of radioactive particles cannot be ruled out. To address these concerns and to provide a better basis for evaluating possible radiological impacts of potential releases in case a salvage operation is initiated, we assessed the atmospheric transport of radionuclides and deposition in Norway from a hypothetical criticality accident on board the K-27. To achieve this, a long term (33 years) meteorological database has been prepared and used for selection of the worst case meteorological scenarios for each of three selected locations of the potential accident. Next, the dispersion model SNAP was run with the source term for the worst-case accident scenario and selected meteorological scenarios. The results showed predictions to be very sensitive to the estimation of the source term for the worst-case accident and especially to the sizes and densities of released radioactive particles. The results indicated that a large area of Norway could be affected, but that the deposition in Northern Norway would be considerably higher than in other areas of the country. The simulations showed that deposition from the worst-case scenario of a hypothetical K-27 accident would be at least two orders of magnitude lower than the deposition observed in Norway following the Chernobyl accident. - Highlights: • Long-term meteorological database has been developed for atmospheric dispersion. • Using this database, the worst case meteorological scenarios have been selected. • Mainly northern parts of Norwegian territory will be

  1. Long term contaminant migration and impacts from uranium mill tailings. Comparison of computer models using a hypothetical dataset

    International Nuclear Information System (INIS)

    Camus, H.

    1995-11-01

    The Uranium Mill Tailings Working Group of BIOMOVS II was initiated in Vienna in 1991 with the primary objective of comparing models which can be used to assess the long term impact of radioactive releases from uranium mill tailings, involving multiple pathways, multiple contaminants and multiple environmental receptors. A secondary objective was to examine how these models can be used to assess the fate of stable toxic elements. This is an interim report of the Working Group describing: development of a basic scenario describing a tailings system; application of models in deterministic calculations of contaminant concentrations in biosphere media, and related radiation doses, contaminant intakes and health risks; comparison of model results and review of the modelling. A hypothetical scenario has been developed for contaminant releases from a uranium mill tailings facility. The assumptions for the tailings facility and its environs have been chosen to facilitate the evaluation of potentially important processes incorporated into models. The site description is therefore idealised and does not represent any particular facility or type of facility. Atmospheric and groundwater release source terms have been chosen to facilitate comparison of models and should not be considered realistic. The time and effort taken over derivation of the scenario description and the associated preliminary modelling has been an important and valuable learning exercise. It also reflects the importance of gaining a clear picture of what is being modelled so that comparisons of model results are meaningful. Work within the exercise has contributed to new model development and to improvements and extensions to existing models. The scenario is a simplified description of a real facility and the releases which might occur. No allowance has been made for engineered features on the tailings disposal system which might reduce releases. The source terms have been chosen so as to test the models

  2. Long term contaminant migration and impacts from uranium mill tailings. Comparison of computer models using a hypothetical dataset

    Energy Technology Data Exchange (ETDEWEB)

    Camus, H [CEA Centre d' Etudes Nucleaires de Fontenay-aux-Roses (France). Inst. de Protection et de Surete Nucleaire; and others

    1995-11-01

    The Uranium Mill Tailings Working Group of BIOMOVS II was initiated in Vienna in 1991 with the primary objective of comparing models which can be used to assess the long term impact of radioactive releases from uranium mill tailings, involving multiple pathways, multiple contaminants and multiple environmental receptors. A secondary objective was to examine how these models can be used to assess the fate of stable toxic elements. This is an interim report of the Working Group describing: development of a basic scenario describing a tailings system; application of models in deterministic calculations of contaminant concentrations in biosphere media, and related radiation doses, contaminant intakes and health risks; comparison of model results and review of the modelling. A hypothetical scenario has been developed for contaminant releases from a uranium mill tailings facility. The assumptions for the tailings facility and its environs have been chosen to facilitate the evaluation of potentially important processes incorporated into models. The site description is therefore idealised and does not represent any particular facility or type of facility. Atmospheric and groundwater release source terms have been chosen to facilitate comparison of models and should not be considered realistic. The time and effort taken over derivation of the scenario description and the associated preliminary modelling has been an important and valuable learning exercise. It also reflects the importance of gaining a clear picture of what is being modelled so that comparisons of model results are meaningful. Work within the exercise has contributed to new model development and to improvements and extensions to existing models. The scenario is a simplified description of a real facility and the releases which might occur. No allowance has been made for engineered features on the tailings disposal system which might reduce releases. The source terms have been chosen so as to test the models

  3. Nuclear Reactor RA Safety Report, Vol. 16, Maximum hypothetical accident; Izvestaj o sigurnosti nuklearnog reaktora RA, Knjiga 16, Maksimalni hipoteticki akcident

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1986-11-15

    Fault tree analysis of the maximum hypothetical accident covers the basic elements: accident initiation, phase development phases - scheme of possible accident flow. Cause of the accident initiation is the break of primary cooling pipe, heavy water system. Loss of primary coolant causes loss of pressure in the primary circuit at the coolant input in the reactor vessel. This initiates safety protection system which should automatically shutdown the reactor. Separate chapters are devoted to: after-heat removal, coolant and moderator loss; accident effects on the reactor core, effects in the reactor building, and release of radioactive wastes. [Serbo-Croat] Sema granjanja za maksimalni hipoteticki akcident obuhvata osnovne elemente: pocetak akcidenta, faze razvoja akcidenta i stablo razvoja - sema potencijalnih akcidentnih tokova. Uzrok pocetka akcidenta je pucanje cevovoda primarnog rashladnog sistema jezgra, sistema teske vode. Gubitak primarnog hladioca izaziva pad pritiska u primarnom sistemu hladjenja na ulazu u reaktorski sud. Ovaj poremecaj pobudjuje sigurnosno kolo zastite koje automatski treba da prekine rad reaktora. Posebno je razmatrano generisanje zaostale snage, isticanje hladioca i moderatora, efekti akcidenta na jezgro, efekti u zgradi reaktora, oslobadjanje radioaktivnih produkata.

  4. Astrophysical implications of hypothetical stable TeV-scale black holes

    International Nuclear Information System (INIS)

    Giddings, Steven B.; Mangano, Michelangelo L.

    2008-01-01

    We analyze macroscopic effects of TeV-scale black holes, such as could possibly be produced at the LHC, in what is regarded as an extremely hypothetical scenario in which they are stable and, if trapped inside Earth, begin to accrete matter. We examine a wide variety of TeV-scale gravity scenarios, basing the resulting accretion models on first-principles, basic, and well-tested physical laws. These scenarios fall into two classes, depending on whether accretion could have any macroscopic effect on the Earth at times shorter than the Sun's natural lifetime. We argue that cases with such an effect at shorter times than the solar lifetime are ruled out, since in these scenarios black holes produced by cosmic rays impinging on much denser white dwarfs and neutron stars would then catalyze their decay on time scales incompatible with their known lifetimes. We also comment on relevant lifetimes for astronomical objects that capture primordial black holes. In short, this study finds no basis for concerns that TeV-scale black holes from the LHC could pose a risk to Earth on time scales shorter than the Earth's natural lifetime. Indeed, conservative arguments based on detailed calculations and the best-available scientific knowledge, including solid astronomical data, conclude, from multiple perspectives, that there is no risk of any significance whatsoever from such black holes.

  5. Public acceptance of a hypothetical Ebola virus vaccine in Aceh, Indonesia: A hospital-based survey

    Directory of Open Access Journals (Sweden)

    Harapan Harapan

    2017-04-01

    Full Text Available Objective: To determine the acceptance towards a hypothetical Ebola virus vaccine (EVV and associated factors in a non-affected country, Indonesia. Methods: A hospital-based, cross-sectional study was conducted in four regencies of Aceh, Indonesia. A set of pre-tested questionnaires was used to obtain information on acceptance towards EVV and a range of explanatory variables. Associations between EVV acceptance and explanatory variables were tested using multi-steps logistic regression analysis and the Spearman's rank correlation. Results: Participants who had knowledge on Ebola virus disease (EVD were 45.3% (192/424 and none of the participants achieved 80% correct answers on the knowledge regarding to EVD. About 73% of participants expressed their willingness to receive the EVV. Education attainment, occupation, monthly income, have heard regarding to EVD previously, socioeconomic level, attitude towards vaccination practice and knowledge regarding to EVD were associated significantly with acceptance towards EVV in univariate analysis (P < 0.05. In the final multivariate model, socio-economic level, attitude towards vaccination practice and knowledge regarding to EVD were the independent explanatory variables for EVV acceptance. Conclusions: The knowledge of EVD was low, but this minimally affected the acceptance towards EVV. However, to facilitate optimal uptake of EVV, dissemination of vaccine-related information prior to its introduction is required.

  6. Analysis of a hypothetical dropped spent nuclear fuel shipping cask impacting a floor mounted crush pad

    International Nuclear Information System (INIS)

    Hawkes, B.D.; Uldrich, E.D.

    1998-03-01

    A crush pad has been designed and analyzed to absorb the kinetic energy of a hypothetically dropped spent nuclear fuel shipping cask into a 44-ft. deep cask unloading pool at the Idaho Chemical Processing Plant. The 110-ton Large Cell Cask was assumed to be accidentally dropped onto the parapet of the unloading pool, causing the cask to tumble through the pool water and impact the floor mounted crush pad with the cask's top corner. The crush pad contains rigid polyurethane foam, which was modeled in a separate computer analysis to simulate the manufacturer's testing of the foam and to determine the foam's stress and strain characteristics. This computer analysis verified that the foam was accurately represented in the analysis to follow. A detailed non-linear, dynamic finite element analysis was then performed on the crush pad and adjacent pool structure to assure that a drop of this massive cask does not result in unacceptable damage to the storage facility. Additionally, verification was made that the crush pad adequately protects the cask from severe impact loading. At impact, the cask has significant vertical, horizontal and rotational velocities. The crush pad absorbs much of the energy of the cask through plastic deformation during primary and secondary impacts. After the primary impact with the crush pad, the cask still has sufficient energy to rebound and rotate until it impacts the pool wall. An assessment is made of the damage to the crush pad and pool wall and of the impact loading on the cask

  7. Determination of the maximum individual dose exposure resulting from a hypothetical LEU plate-melt accident

    International Nuclear Information System (INIS)

    Abdelhady, Amr

    2013-01-01

    Highlights: ► Studying the radioactive release results from hypothetical plate-melt accident. ► Hotspot code was used to study the dose distributions around the reactor. ► A 90% decrease in the received dose in proper operation of filtration. ► The received dose is lower than the annual permissible dose after filtration. - Abstract: The objective of this study was to provide an estimate of the potential impact of accidental radioactive release from the testing cell of the Egyptian second research reactor ETRR-2 on the dose level of public around the reactor. The assessment was performed for two cases: an evaluation of the impact that accidental release has on the dose that would be received by public around the reactor in case of proper operation of testing cell filtration system; and an assessment of the potential dose in case of loss of testing cell filtration system. The results show that the filtration system has a great role in decreasing the dose received by an individual located outside the reactor to a dose level lower than the annual permissible dose

  8. Tsunami Simulations in the Western Makran Using Hypothetical Heterogeneous Source Models from World's Great Earthquakes

    Science.gov (United States)

    Rashidi, Amin; Shomali, Zaher Hossein; Keshavarz Farajkhah, Nasser

    2018-03-01

    The western segment of Makran subduction zone is characterized with almost no major seismicity and no large earthquake for several centuries. A possible episode for this behavior is that this segment is currently locked accumulating energy to generate possible great future earthquakes. Taking into account this assumption, a hypothetical rupture area is considered in the western Makran to set different tsunamigenic scenarios. Slip distribution models of four recent tsunamigenic earthquakes, i.e. 2015 Chile M w 8.3, 2011 Tohoku-Oki M w 9.0 (using two different scenarios) and 2006 Kuril Islands M w 8.3, are scaled into the rupture area in the western Makran zone. The numerical modeling is performed to evaluate near-field and far-field tsunami hazards. Heterogeneity in slip distribution results in higher tsunami amplitudes. However, its effect reduces from local tsunamis to regional and distant tsunamis. Among all considered scenarios for the western Makran, only a similar tsunamigenic earthquake to the 2011 Tohoku-Oki event can re-produce a significant far-field tsunami and is considered as the worst case scenario. The potential of a tsunamigenic source is dominated by the degree of slip heterogeneity and the location of greatest slip on the rupture area. For the scenarios with similar slip patterns, the mean slip controls their relative power. Our conclusions also indicate that along the entire Makran coasts, the southeastern coast of Iran is the most vulnerable area subjected to tsunami hazard.

  9. The Presence of Real Food Usurps Hypothetical Health Value Judgment in Overweight People123

    Science.gov (United States)

    Ziauddeen, Hisham; Davies, Kirsty M.; Jebb, Susan A.; Marteau, Theresa M.

    2016-01-01

    Abstract To develop more ecologically valid models of the neurobiology of obesity, it is critical to determine how the neural processes involved in food-related decision-making translate into real-world eating behaviors. We examined the relationship between goal-directed valuations of food images in the MRI scanner and food consumption at a subsequent ad libitum buffet meal. We observed that 23 lean and 40 overweight human participants showed similar patterns of value-based neural responses to health and taste attributes of foods. In both groups, these value-based responses in the ventromedial PFC were predictive of subsequent consumption at the buffet. However, overweight participants consumed a greater proportion of unhealthy foods. This was not predicted by in-scanner choices or neural response. Moreover, in overweight participants alone, impulsivity scores predicted greater consumption of unhealthy foods. Overall, our findings suggest that, while the hypothetical valuation of the health of foods is predictive of eating behavior in both lean and overweight people, it is only the real-world food choices that clearly distinguish them. PMID:27280152

  10. An Application of Graphical Approach to Construct Multiple Testing Procedure in a Hypothetical Phase III Design

    Directory of Open Access Journals (Sweden)

    Naitee eTing

    2014-01-01

    Full Text Available Many multiple testing procedures (MTP have been developed in recent years. Among these new procedures, the graphical approach is flexible and easy to communicate with non-statisticians. A hypothetical Phase III clinical trial design is introduced in this manuscript to demonstrate how graphical approach can be applied in clinical product development. In this design, an active comparator is used. It is thought that this test drug under development could potentially be superior to this comparator. For comparison of efficacy, the primary endpoint is well established and widely accepted by regulatory agencies. However, an important secondary endpoint based on Phase II findings looks very promising. The target dose may have a good opportunity to deliver superiority to the comparator. Furthermore, a lower dose is included in case the target dose may demonstrate potential safety concerns. This Phase III study is designed as a non-inferiority trial with two doses, and two endpoints. This manuscript will illustrate how graphical approach is applied to this design in handling multiple testing issues.

  11. Process design and economic analysis of a hypothetical bioethanol production plant using carob pod as feedstock.

    Science.gov (United States)

    Sánchez-Segado, S; Lozano, L J; de Los Ríos, A P; Hernández-Fernández, F J; Godínez, C; Juan, D

    2012-01-01

    A process for the production of ethanol from carob (Ceratonia siliqua) pods was designed and an economic analysis was carried out for a hypothetical plant. The plant was assumed to perform an aqueous extraction of sugars from the pods followed by fermentation and distillation to produce ethanol. The total fixed capital investment for a base case process with a capacity to transform 68,000 t/year carob pod was calculated as 39.61 millon euros (€) with a minimum bioethanol production cost of 0.51 €/L and an internal rate of return of 7%. The plant was found to be profitable at carob pod prices lower than 0.188 €/kg. An increase in the transformation capacity of the plant from 33,880 to 135,450 t/year was calculated to result in an increase in the internal rate of return from 5.50% to 13.61%. The obtained results show that carob pod is a promising alternative source for bioethanol production. Copyright © 2011 Elsevier Ltd. All rights reserved.

  12. Simulation of hypothetical criticality accidents involving homogeneous damp low-enriched UO2 powder systems

    International Nuclear Information System (INIS)

    Basoglu, B.; Brewer, R.W.; Haught, C.F.; Hollenbach, D.F.; Wilkinson, A.D.; Dodds, H.L.; Pasqua, P.F.

    1994-01-01

    This paper describes the development of a computer model for predicting the excursion characteristics of a postulated, hypothetical, critically accident involving a homogeneous mixture of low-enriched UO 2 powder and water contained in a cylindrical blender. The model uses point neutronics coupled with simple lumped-parameter thermal-hydraulic feedback. The temperature of the system is calculated using a simple time-dependent energy balance where two extreme conditions for the thermal behavior of the system are considered, which bound the real life situation. Using these extremes, three different models are developed. To evaluate the models, the authors compared the results with the results of the POWDER code, which was developed by the Commissariat a l'Energie Atomique/United Kingdom Atomic Energy Authority (CEA/UKAEA) for damp powder systems. The agreement in these comparisons is satisfactory. Results of the excursion studies in this work show that approximately 10 19 fissions occur as a result of accidental water ingress into powder blenders containing 5,000 kg of low-enriched (5%) UO 2 powder

  13. Astrophysical implications of hypothetical stable TeV-scale black holes

    CERN Document Server

    Giddings, Steven B

    2008-01-01

    We analyze macroscopic effects of TeV-scale black holes, such as could possibly be produced at the LHC, in what is regarded as an extremely hypothetical scenario in which they are stable and, if trapped inside Earth, begin to accrete matter. We examine a wide variety of TeV-scale gravity scenarios, basing the resulting accretion models on first-principles, basic, and well-tested physical laws. These scenarios fall into two classes, depending on whether accretion could have any macroscopic effect on the Earth at times shorter than the Sun's natural lifetime. We argue that cases with such effect at shorter times than the solar lifetime are ruled out, since in these scenarios black holes produced by cosmic rays impinging on much denser white dwarfs and neutron stars would then catalyze their decay on timescales incompatible with their known lifetimes. We also comment on relevant lifetimes for astronomical objects that capture primordial black holes. In short, this study finds no basis for concerns that TeV-scale...

  14. Sequence Analysis of Hypothetical Proteins from 26695 to Identify Potential Virulence Factors

    Directory of Open Access Journals (Sweden)

    Ahmad Abu Turab Naqvi

    2016-09-01

    Full Text Available Helicobacter pylori is a Gram-negative bacteria that is responsible for gastritis in human. Its spiral flagellated body helps in locomotion and colonization in the host environment. It is capable of living in the highly acidic environment of the stomach with the help of acid adaptive genes. The genome of H. pylori 26695 strain contains 1,555 coding genes that encode 1,445 proteins. Out of these, 340 proteins are characterized as hypothetical proteins (HP. This study involves extensive analysis of the HPs using an established pipeline which comprises various bioinformatics tools and databases to find out probable functions of the HPs and identification of virulence factors. After extensive analysis of all the 340 HPs, we found that 104 HPs are showing characteristic similarities with the proteins with known functions. Thus, on the basis of such similarities, we assigned probable functions to 104 HPs with high confidence and precision. All the predicted HPs contain representative members of diverse functional classes of proteins such as enzymes, transporters, binding proteins, regulatory proteins, proteins involved in cellular processes and other proteins with miscellaneous functions. Therefore, we classified 104 HPs into aforementioned functional groups. During the virulence factors analysis of the HPs, we found 11 HPs are showing significant virulence. The identification of virulence proteins with the help their predicted functions may pave the way for drug target estimation and development of effective drug to counter the activity of that protein.

  15. Environmental release of carbon-14 gas from a hypothetical nuclear waste repository

    International Nuclear Information System (INIS)

    Lehto, M.A.; Merrell, G.B.

    1994-01-01

    Radioisotopes may form gases in a spent nuclear fuel waste package due to elevated temperatures or degradation of the fuel rods. Radioactive carbon-14, as gaseous carbon dioxide, is one of the gaseous radioisotopes of concern at an underground disposal facility for spent nuclear fuel and high-level radioactive waste. Carbon-14 dioxide may accumulate inside an intact waste container. Upon breach of the container, a potentially large pulse of carbon-14 dioxide gas may be released to the surrounding environment, followed by a lower, long-term continuous release. If the waste were disposed of in an unsaturated geologic environment, the carbon-14 gas would begin to move through the unsaturated zone to the accessible environment. This study investigates the transport of radioactive carbon-14 gas in geologic porous media using a one-dimensional analytical solution. Spent nuclear fuel emplaced in a deep geologic repository located at a generic unsaturated tuff site is analyzed. The source term for the carbon-14 gas and geologic parameters was obtained from previously published materials. The one-dimensional analytical solution includes diffusion, advection, radionuclide retardation, and radioactive decay terms. Two hypothetical sites are analyzed. One is dominated by advective transport, and the other is dominated by diffusive transport. The dominant transport mechanism at an actual site depends on the site characteristics. Results from the simulations include carbon-14 dioxide travel times to the accessible environment and the total release to the environment over a 10,000-year period. The results are compared to regulatory criteria

  16. Safety Assessment of a Hypothetical Near Surface Disposal at PPTN Serpong Site: Near-Field Modeling

    International Nuclear Information System (INIS)

    Lubis, Erwansyah

    2000-01-01

    The near field modeling of a hypothetical surface disposal at Serpong site has been performed. Considering a realistic downward water flux of 10 -1 0 m/s through the conditioned waste zone and the concrete barriers, transport of radionuclide by advection and dispersion below the bottom of the repository was calculated using PORFLOW computer code. The result shows that the highest fluxes were observed H-3, Cs-135, Nb-94 and Ni-59, all about 10 4 Bq/a/m 2 . Intermediate fluxes were obtained for Cs-137, I-129 and Co-60. Lowest were due to Ni-63 and C-14. The effect on radionuclide fluxes by having an unsaturated soil of 1.0-m depth below the bottom of the repository also was investigated. The results indicate that the highest fluxes are due to Cs-135, Nb-94 and Ni- 59, approximately 10 4 Bq/a/m 2 . The fluxes owing to H-3 has decreased to 10 -9 Bq/a/m 2 owing to decay. Radionuclides that are not absorbed onto lateritic clay soil, C-14 and I-129 are not decreased in flux. All other radionuclides has significantly smaller fluxes compared to the ones calculated at the bottom of the repository. This indicates that the lateric clay soil at Serpong site plays an important role in retarding and dispersing the radionuclide migration towards the ground water. (author)

  17. Tsunami Simulations in the Western Makran Using Hypothetical Heterogeneous Source Models from World's Great Earthquakes

    Science.gov (United States)

    Rashidi, Amin; Shomali, Zaher Hossein; Keshavarz Farajkhah, Nasser

    2018-04-01

    The western segment of Makran subduction zone is characterized with almost no major seismicity and no large earthquake for several centuries. A possible episode for this behavior is that this segment is currently locked accumulating energy to generate possible great future earthquakes. Taking into account this assumption, a hypothetical rupture area is considered in the western Makran to set different tsunamigenic scenarios. Slip distribution models of four recent tsunamigenic earthquakes, i.e. 2015 Chile M w 8.3, 2011 Tohoku-Oki M w 9.0 (using two different scenarios) and 2006 Kuril Islands M w 8.3, are scaled into the rupture area in the western Makran zone. The numerical modeling is performed to evaluate near-field and far-field tsunami hazards. Heterogeneity in slip distribution results in higher tsunami amplitudes. However, its effect reduces from local tsunamis to regional and distant tsunamis. Among all considered scenarios for the western Makran, only a similar tsunamigenic earthquake to the 2011 Tohoku-Oki event can re-produce a significant far-field tsunami and is considered as the worst case scenario. The potential of a tsunamigenic source is dominated by the degree of slip heterogeneity and the location of greatest slip on the rupture area. For the scenarios with similar slip patterns, the mean slip controls their relative power. Our conclusions also indicate that along the entire Makran coasts, the southeastern coast of Iran is the most vulnerable area subjected to tsunami hazard.

  18. Soymilk plant simulation to predict the formula of a new Hypothetical Product

    Directory of Open Access Journals (Sweden)

    Iacobi Boanerges Boanerges

    2018-01-01

    Full Text Available Ideal Patterns reactors alteration by real reactor patterns, for better accuracy was done using industrial software: Aspen Plus and Hysys Version 7.1 to represent the batch real mixer and soymilk production system. Fluid package for properties prediction was chosen from the software list. A feed steam of 41,67 Kg/h (Soybean was taken; mass fractions were given by element since the Soybean has a wide blend of substances which cannot be described as a unique compound formula. The elements were C, N, H, O, S, Na, K, Mg, Ca, Fe, P, and Cu. Final flow of 8,333 Kg/h was used to achieve the objective of this study: the elemental analysis method for the hypothetical new product prediction (based only in presence of Amino-acids and other macro and multiple substances. The macromolecules described here are the onset for new specific soymilk compounds such as the concluded on this study. Fulminic Acid Family compound and the protein analysis may correspond to new proteins which are not well-known such as the ones found in studies by the Hospital de Rhode Island in 2014. Presence of Fe and Cu in soybean was ascribed to the micronutrients that could be present in the soil of crop cultivation and in soybeans by absorption.

  19. Planning guidance for emergency response to a hypothetical nuclear attack on Riyadh, Saudi Arabia

    Science.gov (United States)

    Shubayr, Nasser Ali M.

    The threat of nuclear attack will remain imminent in an ever-advancing society. Saudi Arabia is not immune to this threat. This dissertation establishes planning guidance for response to a nuclear attack on Riyadh, the capital of Saudi Arabia, based on a hypothetical scenario of a nuclear detonation. A case scenario of a one-megaton thermonuclear bomb detonated at ground level over Riyadh is used to support the thesis. Previous nuclear tests and the Hiroshima and Nagasaki bombings have been used to present possible effects on Riyadh. US planning guidance and lessons learned from the Chernobyl and Fukushima nuclear plants accidents have been used to develop the emergency response guidance. The planning guidance outlines a rapid response to the nuclear detonation. Four damage zones have been identified; severe damage zone, moderate damage zone, light damage zone and dangerous fallout zone. Actions that are recommended, and those that should be avoided, have been determined for each zone. Shelter/ evacuation evaluation for blast-affected and fallout-affected areas is the basis for the recommendation that shelter in place is the best decision for the first hours to days after the attack. Guidelines for medical care response and population monitoring and decontamination are included to reduce the early and long-term effects of the attack. Recommendations to the Saudi Arabian authorities have been made to facilitate suitable preparedness and response for such an event.

  20. Testing the feasibility of a hypothetical whaling-conservation permit market in Norway.

    Science.gov (United States)

    Huang, Biao; Abbott, Joshua K; Fenichel, Eli P; Muneepeerakul, Rachata; Perrings, Charles; Gerber, Leah R

    2017-08-01

    A cap-and-trade system for managing whale harvests represents a potentially useful approach to resolve the current gridlock in international whale management. The establishment of whale permit markets, open to both whalers and conservationists, could reveal the strength of conservation demand, about which little is known. This lack of knowledge makes it difficult to predict the outcome of a hypothetical whale permit market. We developed a bioeconomic model to evaluate the influence of economic uncertainty about demand for whale conservation or harvest. We used simulations over a wide range of parameterizations of whaling and conservation demands to examine the potential ecological consequences of the establishment of a whale permit market in Norwegian waters under bounded (but substantial) economic uncertainty. Uncertainty variables were slope of whaling and conservation demand, participation level of conservationists and their willingness to pay for whale conservation, and functional forms of demand, including linear, quadratic, and log-linear forms. A whale-conservation market had the potential to yield a wide range of conservation and harvest outcomes, the most likely outcomes were those in which conservationists bought all whale permits. © 2017 Society for Conservation Biology.

  1. Quantitative valuation placed by children and teenagers on participation in two hypothetical research scenarios.

    Science.gov (United States)

    Funnell, Dan; Fertleman, Caroline; Carrey, Liz; Brierley, Joe

    2012-11-01

    For paediatric medicine to advance, research must be conducted specifically with children. Concern about poor recruitment has led to debate about payments to child research participants. Although concerns about undue influence by such 'compensation' have been expressed, it is useful to determine whether children can relate the time and inconvenience associated with participation to the value of payment offered. This study explores children's ability to determine fair remuneration for research participation, and reviews payments to children participating in research. Forty children were interviewed before outpatient visits at two London Hospitals: Great Ormond Street Children's Hospital and the Whittington Hospital District General Hospital. Children were asked to value their involvement in two hypothetical research scenarios - the first an 'additional blood sample', the second also involving daily oral oil capsules taken for a fortnight before further venesection. Background knowledge about familiarity with money, and experience with hospitalisation was assessed. The mean valuation of involvement in the second scenario (£13.18) was higher than in the first (£2.84) (pfair valuation for participation in medical research. The monetary sums are influenced by the time and inconvenience involved in the research, and by the extent of recent experience with hospital procedures. The authors review current ethical thinking regarding payments to child research participants and suggest that a fair wage model might be an ethically acceptable way to increase participation of children in research.

  2. "Hypothetical machines": the science fiction dreams of Cold War social science.

    Science.gov (United States)

    Lemov, Rebecca

    2010-06-01

    The introspectometer was a "hypothetical machine" Robert K. Merton introduced in the course of a 1956 how-to manual describing an actual research technique, the focused interview. This technique, in turn, formed the basis of wartime morale research and consumer behavior studies as well as perhaps the most ubiquitous social science tool, the focus group. This essay explores a new perspective on Cold War social science made possible by comparing two kinds of apparatuses: one real, the other imaginary. Even as Merton explored the nightmare potential of such machines, he suggested that the clear aim of social science was to build them or their functional equivalent: recording machines to access a person's experiential stream of reality, with the ability to turn this stream into real-time data. In this way, the introspectometer marks and symbolizes a broader entry during the Cold War of science-fiction-style aspirations into methodological prescriptions and procedural manuals. This essay considers the growth of the genre of methodological visions and revisions, painstakingly argued and absorbed, but punctuated by sci-fi aims to transform "the human" and build newly penetrating machines. It also considers the place of the nearly real-, and the artificial "near-substitute" as part of an experimental urge that animated these sciences.

  3. Development of Inundation Map for Hypothetical Asa Dam Break using HEC-RAS and ARC GIS

    Directory of Open Access Journals (Sweden)

    O. S. Balogun

    2017-12-01

    Full Text Available Asa Dam in Ilorin, Nigeria was constructed in the1980s. The dam made of earth material has a length of 507 meters and height of 27 meters. The maximum capacity of the impoundment during the raining season is approximately 43 x 106 m3. Years after construction, tremendous physical development is taking place along the river channel starting from the dam axis towards downstream for a distance of approximately 12 km. It is estimated that several thousands of people are currently living and performing various activities within the vicinity of the river channel. It is therefore necessary to evaluate the risk involved in case of a possible dam break disaster. In view of this, a hypothetical dam break scenario was studied and analyzed using Hydrologic Engineering Center’s River Analysis System computer model. Unsteady flow simulation was performed using geometric data obtained from Digital Terrain Model with 100-year, 24 hr flow event. The HEC-RAS was used in concert with HEC-GeoRAS to assess the flood hazard along the approximately 12 km river channel. The simulated water surface elevations were exported to Arc GIS to produce an inundation map that graphically indicates the extent of the flood hazard. The results show that some important locations such as industrial, residential, motor parks, recreational and places of worship along the river length are prone to significant flood impact. This map serves as an input for emergency preparation programme in the event of the dam break.

  4. Safety assessment of the Indonesian multipurpose reactor RSG-GAS against ATWS and hypothetical accidents

    International Nuclear Information System (INIS)

    Hastowo, H.; Nabbi, R.; Prayoto; Ismuntoyo, R.P.H.

    2004-01-01

    Investigation on ATWS and hypothetical accidents for the Indonesian Multipurpose Reactor RSG-GAS have been undertaken by computer simulation technique. Two computer codes, namely RELAP5 and PARET-ANL, were used as the main tools. The RELAP5 was utilized to perform system analysis while the PARET-ANL code was used to perform the reactor core analysis in more detail. Two different models have been applied as a basis of the simulation: Typical Working Core model (IWC-model) consisting of four regions with different radial power factors; and the hot-channel model consisting of two regions with different radial power factors. Both RELAP5 ad PARET-ANL results showed that in the occurrence of ATWS, failure on fuel element or fuel plate was limited to the region with the most highest power factor. The results also indicated that no high pressure development occurs in that region, so that mechanical damage on the fuel element or other core components due to pressure shock did not happen.(author)

  5. Economic impacts of a hypothetical H1N1 pandemic : a cross-sectional analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Braeton J.; Shaneyfelt, Calvin R.

    2010-06-01

    A NISAC study on the economic effects of a hypothetical H1N1 pandemic was done in order to assess the differential impacts at the state and industry levels given changes in absenteeism, mortality, and consumer spending rates. Part of the analysis was to determine if there were any direct relationships between pandemic impacts and gross domestic product (GDP) losses. Multiple regression analysis was used because it shows very clearly which predictors are significant in their impact on GDP. GDP impact data taken from the REMI PI+ (Regional Economic Models, Inc., Policy Insight +) model was used to serve as the response variable. NISAC economists selected the average absenteeism rate, mortality rate, and consumer spending categories as the predictor variables. Two outliers were found in the data: Nevada and Washington, DC. The analysis was done twice, with the outliers removed for the second analysis. The second set of regressions yielded a cleaner model, but for the purposes of this study, the analysts deemed it not as useful because particular interest was placed on determining the differential impacts to states. Hospitals and accommodation were found to be the most important predictors of percentage change in GDP among the consumer spending variables.

  6. Radioactive particulate release associated with the DOT specification 6M container under hypothetical accident conditions

    International Nuclear Information System (INIS)

    Taylor, J.M.; Raney, P.J.

    1986-02-01

    A testing program was conducted to determine the leakage of depleted uranium dioxide powder (DUO) from the inner containment components of the US Department of Transportation's (DOT) specification 6M container under hypothetical accident conditions. Depleted uranium dioxide was selected as a surrogate for plutonium oxide because of the similarities in the powder characteristics, density and particle size, and because of the special handling and special facilities required for plutonium oxide. The DUO was packaged inside food pack cans in three different configurations inside the 2R vessel of the 6M container. The amount of DUO powder leakage ranged from none detectable ( -7 g) to a high of 1 x 10 -3 g. The combination of gravity, vibration and pressure produced the highest leakage of DUO. Containers that had hermetic seals (leak rates -4 atm cc/min) did not leak any detectable amount ( -7 g) of DUO under the test conditions. Impact forces had no effect on the leakage of particles with the packaging configurations used. 23 refs., 24 figs., 3 tabs

  7. Summary of four release consequence analyses for hypothetical nuclear waste repositories in salt and granite

    International Nuclear Information System (INIS)

    Cole, C.R.; Bond, F.W.

    1980-12-01

    Release consequence methology developed under the Assessment of Effectiveness of Geologic Isolation Systems (AEGIS) program has now been applied to four hypothetical repository sites. This paper summarizes the results of these four studies in order to demonstrate that the far-field methodology developed under the AEGIS program offers a practical approach to the post-closure safety assessment of nuclear waste repositories sited in deep continental geologic formations. The four studies are briefly described and compared according to the following general categories: physical description of the repository (size, inventory, emplacement depth); geologic and hydrologic description of the site and the conceptual hydrologic model for the site; description of release scenario; hydrologic model implementation and results; engineered barriers and leach rate modeling; transport model implementation and results; and dose model implementation and results. These studies indicate the following: numerical modeling is a practical approach to post-closure safety assessment analysis for nuclear waste repositories; near-field modeling capability needs improvement to permit assessment of the consequences of human intrusion and pumping well scenarios; engineered barrier systems can be useful in mitigating consequences for postulated release scenarios that short-circuit the geohydrologic system; geohydrologic systems separating a repository from the natural biosphere discharge sites act to mitigate the consequences of postulated breaches in containment; and engineered barriers of types other than the containment or absorptive type may be useful

  8. Structure of Lmaj006129AAA, a hypothetical protein from Leishmania major

    International Nuclear Information System (INIS)

    Arakaki, Tracy; Le Trong, Isolde; Phizicky, Eric; Quartley, Erin; DeTitta, George; Luft, Joseph; Lauricella, Angela; Anderson, Lori; Kalyuzhniy, Oleksandr; Worthey, Elizabeth; Myler, Peter J.; Kim, David; Baker, David; Hol, Wim G. J.; Merritt, Ethan A.

    2006-01-01

    The crystal structure of a conserved hypothetical protein from L. major, Pfam sequence family PF04543, structural genomics target ID Lmaj006129AAA, has been determined at a resolution of 1.6 Å. The gene product of structural genomics target Lmaj006129 from Leishmania major codes for a 164-residue protein of unknown function. When SeMet expression of the full-length gene product failed, several truncation variants were created with the aid of Ginzu, a domain-prediction method. 11 truncations were selected for expression, purification and crystallization based upon secondary-structure elements and disorder. The structure of one of these variants, Lmaj006129AAH, was solved by multiple-wavelength anomalous diffraction (MAD) using ELVES, an automatic protein crystal structure-determination system. This model was then successfully used as a molecular-replacement probe for the parent full-length target, Lmaj006129AAA. The final structure of Lmaj006129AAA was refined to an R value of 0.185 (R free = 0.229) at 1.60 Å resolution. Structure and sequence comparisons based on Lmaj006129AAA suggest that proteins belonging to Pfam sequence families PF04543 and PF01878 may share a common ligand-binding motif

  9. An assessment of the effect of reactor size on hypothetical ore disruptive accidents

    International Nuclear Information System (INIS)

    Buttery, N.E.; Board, S.J.

    1978-01-01

    There is a general tendency towards larger plant sizes, in the interests primarily of economies of scale. In this paper the effect of core size on hypothetical core disruptive accidents (HCDA) is considered, and it is shown that the energy yield increases rapidly with size, primarily due to a tendency towards coherence of voiding in reactors with a large positive void coefficient. Small cores compare favourably in this respect with alternative large designs with low void coefficient cores, because the reduced mass more than compensates for the reduced doppler constant, and they also have a potential advantage in later stages of HCDA (transition phase and after). If energetic HCDA cannot be shown to be unrealistic and if containment of these events is provided as part of the general safety philosophy, then the costs (which may increase disproportionately with yield) of engineering an adequately reliable system needs to be accounted for. Containment costs are only one of many factors which need to be taken into account in optimising the design and so the energy release from a HCDA must take its proper place in the optimisation according to the safety principles and safety case agreed for LMFBRS. (author)

  10. Hypothetical learning trajectory design on the history of Indonesian independence struggle in Mathematics logic instruction

    Directory of Open Access Journals (Sweden)

    Dra Nurjanah

    2017-12-01

    Full Text Available The research was aimed at developing learning resources for mathematics logic using the hypothetical learning trajectory designed through reflection on the history of Indonesian independence struggle. The study was carried out at the Department of Mathematics Education of the Faculty of Teacher Training and Educational Sciences Nusantara Islamic University (Uninus. The study used design research consisted of three stages: preparing the experiments, design the experiments, and retrospective analysis. Preparing the experiments stage has been completed and design the experiments stage is currently under preparation. The main activities accomplished in preparing the experiments stage consisted of: studies of Indonesian independence struggle, curriculum analysis, literature review, and early prototype design. Design the experiments phase has enabled the development of the research instruments. The learning trajectory which has been designed in the first stage involved: reflections on the history of Indonesian independence struggle; implication and bi-implication; implication, bi-implication and their truth in the context of the history of the Indonesian independence struggle; and implication, bi-implication and their truth in the context of mathematics. Based on the results of discussions with colleagues, the students’ ability in mathematical thinking can be developed by using the history of Indonesian independence struggle as the context of learning in a mathematics logics course.

  11. Vulnerability Analysis for Physical Protection System at Hypothetical Facility of a Different Type Reactor

    International Nuclear Information System (INIS)

    Jung, Won-Moog; Kim, Jung-Soo; Kim, Jae-Kwang; Yoo, Ho-Sik; Kwak, Sung-Ho; Jang, Sung-Soon

    2007-01-01

    Since the 9/11 event in the U.S.A, International terror possibilities has been increased for nuclear facilities including nuclear power plants(NPPs). It is necessary to evaluate the performance of an existing physical protection system(PPS) at nuclear facilities based on such malevolent acts. Detection, delay, and response elements are all important to PPS. They are used for the analysis and evaluation of a PPS and its effectiveness. Methods are available to analyze a PPS and evaluate its effectiveness. Sandia National Laboratory(SNL) in the U.S.A developed a System Analysis of Vulnerability to Intrusion (SAVI) computer code for evaluating the effectiveness of PPS against outsider threats. This study presents the vulnerability analysis of the PPS at hypothetical facility of a different type using SAVI code that the basic input parameters are from PPS of a different type. For analysis, first, the site-specific Adversary Sequence Diagrams(ASDs) of the PPS is designed. It helps to understand the functions of the existing PPS composed of physical areas and Protection Elements(PEs). Then, the most vulnerable path of an ASD as a measure of effectiveness is determined. The results in the analysis can compare with the most vulnerable paths at a different type

  12. Effect of engineered safety features on the risk of hypothetical LMFBR accidents

    International Nuclear Information System (INIS)

    Cybulskis, P.

    1978-01-01

    The risks of hypothetical core-disruptive accidents in liquid-metal-cooled fast breeder reactors which involve meltthrough of the reactor vessel are compared for two plant designs: one design without specific provisions to accommodate such an accident and the other design with an ex-vessel core catcher and a cvity hot liner. The approach to risk analysis used is that developed in the Reactor Safety Study (WASH-1400). Since the probability of occurrence of such an event has not been evaluated, however, insight into the potential risk is gained only on a relative basis. The principal conclusions of this study are: (1) adding a core catcher--hot liner reduces the probabilty of accidents having major consequences; (2) the degree to which hot liner--core catcher systems can reduce the risk of melt-through accidents is limited by the failure probability of these systems; (3) fractional radioactive releases to the environment in the liquid-metal-cooled fast breeder reactor accidents considered are comparable to those from the light-water reactors evaluated in WASH-1400; (4) since sodium--concrete reactions are a dominant driving force during the accident, the integrity of the cavity liner is as important as the function of the core catcher; (5) there may be other accidents or paths to radioactive releases that are not affected by the addition of a hot liner--core catcher

  13. Exploring hypothetical learning progressions for the chemistry of nitrogen and nuclear processes

    Science.gov (United States)

    Henry, Deborah McKern

    Chemistry is a bridge that connects a number of scientific disciplines. High school students should be able to determine whether scientific information is accurate, how chemistry applies to daily life, and the mechanism by which systems operate (NRC, 2012). This research focuses on describing hypothetical learning progressions for student understanding of the chemical reactions of nitrogen and nuclear processes and examines whether there is consistency in scientific reasoning between these two distinct conceptual areas. The constant comparative method was used to analyze the written products of students including homework, formative and summative tests, laboratory notebooks, reflective journals, written presentations, and discussion board contributions via Edmodo (an online program). The ten participants were 15 and 16 year old students enrolled in a general high school chemistry course. Instruction took place over a ten week period. The learning progression levels ranged from 0 to 4 and were described as missing, novice, intermediate, proficient, and expert. The results were compared to the standards set by the NRC with a lower anchor (expectations for grade 8) and upper anchor (expectations for grade 12). The results indicate that, on average, students were able to reach an intermediate level of understanding for these concepts.

  14. Release of gases and their influence on containment integrity during a hypothetical meltdown accident

    International Nuclear Information System (INIS)

    Hassmann, K.; Reimann, M.

    1981-01-01

    The sequence of a hypothetical core melt down accident has been subdivided into four phases. Heating up of the core until failure of the core support structure is the first phase. It starts at a certain water level in the reactor pressure vessel (RPV) and ends with the failure of the grid plate. The second phase is characterized by the evaporation of the water in the lower plenum of the RPV. The second phase lasts until a molten core debris is formed. The third phase is concerned with the heating up of the pressure vessel after formation of a molten pool in the lower plenum of the RPV. After pressure vessel failure, the molten corium will interact in the fourth phase with the concrete structure beneath the pressure vessel. In this paper the gas release during all four accident phases and the resulting pressure-time history within the containment of a German standard PWR is given, taking into account violent combustion of hydrogen. In particular, the differences caused by dsestruction of concrete with silicious and with calcareous aggregates has been analyzed. The basis for the results in the 4th phase is the WECHSL code. Long term containment calculations have been performed with the COCMEL-code

  15. Identification of functional candidates amongst hypothetical proteins of Treponema pallidum ssp. pallidum.

    Science.gov (United States)

    Naqvi, Ahmad Abu Turab; Shahbaaz, Mohd; Ahmad, Faizan; Hassan, Md Imtaiyaz

    2015-01-01

    Syphilis is a globally occurring venereal disease, and its infection is propagated through sexual contact. The causative agent of syphilis, Treponema pallidum ssp. pallidum, a Gram-negative sphirochaete, is an obligate human parasite. Genome of T. pallidum ssp. pallidum SS14 strain (RefSeq NC_010741.1) encodes 1,027 proteins, of which 444 proteins are known as hypothetical proteins (HPs), i.e., proteins of unknown functions. Here, we performed functional annotation of HPs of T. pallidum ssp. pallidum using various database, domain architecture predictors, protein function annotators and clustering tools. We have analyzed the sequences of 444 HPs of T. pallidum ssp. pallidum and subsequently predicted the function of 207 HPs with a high level of confidence. However, functions of 237 HPs are predicted with less accuracy. We found various enzymes, transporters, binding proteins in the annotated group of HPs that may be possible molecular targets, facilitating for the survival of pathogen. Our comprehensive analysis helps to understand the mechanism of pathogenesis to provide many novel potential therapeutic interventions.

  16. Modelling of melting and solidification transport phenomena during hypothetical NPP severe accidents

    Energy Technology Data Exchange (ETDEWEB)

    Sarler, B [Inst. Jozef Stefan, Ljubljana (Slovenia)

    1992-07-01

    A physical and mathematical framework to deal with the transport phenomena occuring during melting and solidification of the hypothetical NPP severe accidents is presented. It concentrates on the transient temperature, velocity, and species concentration distributions during such events. The framework is based on the Mixture Continuum Formulation of the components and phases, cast in the boundary-domain integral shape structured by the fundamental solution of the Laplace equation. The formulation could cope with various solid-liquid sub-systems through the inclusion of the specific closure relations. The deduced system of boundary-domain integral equations for conservation of mass, energy, momentum, and species could be solved by the boundary element discrete approximative method. (author) [Slovenian] Predstavljeno je fizikalno in matematicno ogrodje za obravnavo prenosnih pojavov taljenja in strjevanja med hipoteticnimi tezkimi nezgodami v jedrskih elektrarnah. Osredotoceno je na popis neustaljene porazdelitve temperatur, hitrosti in koncentracij sestavin med taksnimi dogodki. Ogrodje temelji na formulaciji kontinuuma mesanice komponent in faz, v obliki robno obmocnih integralskih enacb, ki so sestavljena na podlagi fundamentalne resitve Laplace-ove enacbe. Formulacija lahko popisuje stevilne trdno-tekoce pod-sisteme na podlagi specificnih sklopitvenih relacij. Izpeljan sistem robno-obmocnih integralskih enacb za popis ohranitve mase, energije, gibalne kolicine in sestavin lahko resimo na podlagi diskretne aproksimativne metode robnih elementov. (author)

  17. Bioinformatics and structural characterization of a hypothetical protein from Streptococcus mutans: implication of antibiotic resistance.

    Directory of Open Access Journals (Sweden)

    Jie Nan

    2009-10-01

    Full Text Available As an oral bacterial pathogen, Streptococcus mutans has been known as the aetiologic agent of human dental caries. Among a total of 1960 identified proteins within the genome of this organism, there are about 500 without any known functions. One of these proteins, SMU.440, has very few homologs in the current protein databases and it does not fall into any protein functional families. Phylogenetic studies showed that SMU.440 is related to a particular ecological niche and conserved specifically in some oral pathogens, due to lateral gene transfer. The co-occurrence of a MarR protein within the same operon among these oral pathogens suggests that SMU.440 may be associated with antibiotic resistance. The structure determination of SMU.440 revealed that it shares the same fold and a similar pocket as polyketide cyclases, which indicated that it is very likely to bind some polyketide-like molecules. From the interlinking structural and bioinformatics studies, we have concluded that SMU.440 could be involved in polyketide-like antibiotic resistance, providing a better understanding of this hypothetical protein. Besides, the combination of multiple methods in this study can be used as a general approach for functional studies of a protein with unknown function.

  18. Individual differences in the use of the response scale determine valuations of hypothetical health states: an empirical study

    NARCIS (Netherlands)

    Essink-Bot, Marie-Louise; Stuifbergen, Marja C.; Meerding, Willem-Jan; Looman, Caspar W. N.; Bonsel, Gouke J.

    2007-01-01

    BACKGROUND: The effects of socio-demographic characteristics of the respondent, including age, on valuation scores of hypothetical health states remain inconclusive. Therefore, we analyzed data from a study designed to discriminate between the effects of respondents' age and time preference on

  19. Development of SPEEDI-MP and its application to a hypothetical accident of a nuclear submarine in the Japan Sea

    International Nuclear Information System (INIS)

    Kobayashi, Takuya; Nagai, Haruyasu; Chino, Masamichi; Togawa, Orihiko

    2004-01-01

    A software system SPEEDI-MP is being developed to resolve the environmental problems by simulating the behavior of pollutants in the atmospheric, oceanic and terrestrial environment. Verification of oceanic dispersion prediction codes on the system was carried out to assess the migration behavior of the released 241 Am from a hypothetically sunken nuclear submarine in the Japan Sea. (author)

  20. Perceptions of, and Assistance Provided to, a Hypothetical Rape Victim: Differences between Rape Disclosure Recipients and Nonrecipients

    Science.gov (United States)

    Paul, Lisa A.; Kehn, Andre; Gray, Matt J.; Salapska-Gelleri, Joanna

    2014-01-01

    Objective: Undergraduate rape disclosure recipients' and nonrecipients' sociodemographic and life experience variables, attitudes towards rape, and responses to a hypothetical rape disclosure were compared to determine differences between them. Participants: One hundred ninety-two undergraduates at 3 universities participated in this online survey…

  1. Issues in clustered nuclear siting: a comparison of a hypothetical nuclear energy center in New Jersey with dispersed nuclear siting

    International Nuclear Information System (INIS)

    Meier, P.M.; Morell, D.

    1976-09-01

    The report is an analysis of a hypothetical nuclear energy center (NEC) conducted in support of the recently completed study by the Nuclear Regulatory Commission, mandated by the Congress in the Energy Reorganization Act of 1974. The intent of the analysis of the hypothetical, or ''surrogate'', site was to inject a local and regional perspective into the assessment of technical, environmental, institutional, and socioeconomic issues which could be adequately addressed only by reference to a specific site. The hypothetical NEC site in Ocean County, New Jersey, was chosen to illustrate the problems and impacts of potential energy centers in coastal and near-coastal sites in relatively close proximity to large metropolitan areas. Earlier studies of hypothetical energy centers on the Mississippi River at River Bend, La., and on the Columbia River near Hanford, Washington, were also re-examined for their relevance to this new study effort. Neither Ocean County, nor any of the other surrogate sites, have been considered for actual construction of an NEC, nor does their selection for study purposes imply any judgement of desirability. Indeed, the major finding of the report presented is that Ocean County is a relatively poor location for an energy center, and this may well be true of many coastal locations similar to the Jersey shore. The objective in selecting surrogate sites, then, was not to find the best locations, but to select sites that would illustrate the broadest range of potential public policy and siting issues

  2. Characterization of hypothetical proteins Cpn0146, 0147, 0284 & 0285 that are predicted to be in the Chlamydia pneumoniae inclusion membrane

    Directory of Open Access Journals (Sweden)

    Liu Kaiyang

    2007-05-01

    Full Text Available Abstract Background Although more than 100 Chlamydia pneumoniae hypothetical proteins have been predicted to be inclusion membrane proteins, only a few have been experimentally demonstrated to be in the inclusion membrane. Using antibodies raised with fusion proteins, we characterized four such hypothetical proteins encoded by two gene clusters (Cpn0146-147 and Cpn0284-285 in the C. pneumoniae genome. Results Cpn0146 and 0147 were detected in the inclusion membrane while Cpn0284 and 0285 inside inclusion and mainly associated with reticulate bodies although all four proteins contain an N-terminal bi-lobed hydrophobic region, a signature motif assigned to inclusion membrane proteins. These four hypothetical proteins were only detected in cells infected with C. pneumoniae but not other chlamydial species, with Cpn0147 at 6 hours and Cpn0146, 0284 & 0285 at 24 hours after infection. Cpn0146 & 147 but not Cpn0284 and 285 co-localized with a host cell endoplasmic reticulum marker, a property known to be possessed by some chlamydial inclusion membrane proteins, when expressed in the host cell cytosol via transgenes. However, the endoplasmic reticulum localization of the C. pneumoniae inclusion membrane proteins did not result in inhibition of the subsequent C. pneumoniae infection. Conclusion The hypothetical proteins Cpn0146 & 0147 were localized in the C. pneumoniae inclusion membrane while Cpn0284 & 0285 within the inclusion although all four were predicted to be Inc proteins, suggesting the need to experimentally characterize the predicted Inc proteins.

  3. Research Ethics in Emerging Forms of Online Learning: Issues Arising from a Hypothetical Study on a MOOC

    Science.gov (United States)

    Esposito, Antonella

    2012-01-01

    This paper is concerned with how research ethics is evolving along with emerging online research methods and settings. In particular, it focuses on ethics issues implied in a hypothetical virtual ethnography study aiming to gain insights on participants' experience in an emergent context of networked learning, namely a MOOC--Massive Online Open…

  4. Children's Use and Knowledge of Display Rules for Anger following Hypothetical Vignettes versus following Live Peer Interaction.

    Science.gov (United States)

    Parker, Elizabeth H.; Hubbard, Julie A.; Ramsden, Sally R.; Relyea, Nicole; Dearing, Karen F.; Smithmyer, Catherine M.; Schimmel, Kelly D.

    2001-01-01

    Examined correspondence between second-graders' use and knowledge of anger display rules. Found that children's responses were moderately related across two contexts. Following live interactions, compared to hypothetical vignettes, children reported feeling and expressing less anger, intending to hide their anger more, and dissembling their anger…

  5. KSHV Rta promoter specification and viral reactivation

    Directory of Open Access Journals (Sweden)

    Jonathan eGuito

    2012-02-01

    Full Text Available Viruses are obligate intracellular pathogens whose biological success depends upon replication and packaging of viral genomes, and transmission of progeny viruses to new hosts. The biological success of herpesviruses is enhanced by their ability to reproduce their genomes without producing progeny viruses or killing the host cells, a process called latency. Latency permits a herpesvirus to remain undetected in its animal host for decades while maintaining the potential to reactivate, or switch, to a productive life cycle when host conditions are conducive to generating viral progeny. Direct interactions between many host and viral molecules are implicated in controlling herpesviral reactivation, suggesting complex biological networks that control the decision. One viral protein that is necessary and sufficient to switch latent KSHV into the lytic infection cycle is called K-Rta. Rta is a transcriptional activator that specifies promoters by binding direct DNA directly and interacting with cellular proteins. Among these cellular proteins, binding of K-Rta to RBP-Jk is essential for viral reactivation.. In contrast to the canonical model for Notch signaling, RBP-Jk is not uniformly and constitutively bound to the latent KSHV genome, but rather is recruited to DNA by interactions with K-Rta. Stimulation of RBP-Jk DNA binding requires high affinity binding of Rta to repetitive and palindromic CANT DNA repeats in promoters, and formation of ternary complexes with RBP-Jk. However, while K-Rta expression is necessary for initiating KSHV reactivation, K-Rta’s role as the switch is inefficient. Many factors modulate K-Rta’s function, suggesting that KSHV reactivation can be significantly regulated post-Rta expression and challenging the notion that herpesviral reactivation is bistable. This review analyzes rapidly evolving research on KSHV K-Rta to consider the role of K-Rta promoter specification in regulating the progression of KSHV reactivation.

  6. Spring 5 & reactive streams

    CERN Multimedia

    CERN. Geneva; Clozel, Brian

    2017-01-01

    Spring is a framework widely used by the world-wide Java community, and it is also extensively used at CERN. The accelerator control system is constituted of 10 million lines of Java code, spread across more than 1000 projects (jars) developed by 160 software engineers. Around half of this (all server-side Java code) is based on the Spring framework. Warning: the speakers will assume that people attending the seminar are familiar with Java and Spring’s basic concepts. Spring 5.0 and Spring Boot 2.0 updates (45 min) This talk will cover the big ticket items in the 5.0 release of Spring (including Kotlin support, @Nullable and JDK9) and provide an update on Spring Boot 2.0, which is scheduled for the end of the year. Reactive Spring (1h) Spring Framework 5.0 has been released - and it now supports reactive applications in the Spring ecosystem. During this presentation, we'll talk about the reactive foundations of Spring Framework with the Reactor project and the reactive streams specification. We'll al...

  7. Reactivity of nitriles

    International Nuclear Information System (INIS)

    Kukushkin, Yu.N.

    1987-01-01

    Reactivity of coordination nitriles in transition metal (Ru, Mo, W, Zr, Hf) complexes, namely: transformation of nitriles of the first coordination sphere into N-acyl-substituted amides, amidines, nitrile interaction; with water, alkalines, alcoholes, hydrogen, azide and cyanide ions is considered. Introduction of acetonitrile molecule to uranium (4)-carbon double bond is discussed

  8. Clojure reactive programming

    CERN Document Server

    Borges, Leonardo

    2015-01-01

    If you are a Clojure developer who is interested in using Reactive Programming to build asynchronous and concurrent applications, this book is for you. Knowledge of Clojure and Leiningen is required. Basic understanding of ClojureScript will be helpful for the web chapters, although it is not strictly necessary.

  9. A Universal Reactive Machine

    DEFF Research Database (Denmark)

    Andersen, Henrik Reif; Mørk, Simon; Sørensen, Morten U.

    1997-01-01

    Turing showed the existence of a model universal for the set of Turing machines in the sense that given an encoding of any Turing machine asinput the universal Turing machine simulates it. We introduce the concept of universality for reactive systems and construct a CCS processuniversal...

  10. Chemical Reactivity Test (CRT)

    Energy Technology Data Exchange (ETDEWEB)

    Zaka, F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-12-13

    The Chemical Reactivity Test (CRT) is used to determine the thermal stability of High Explosives (HEs) and chemical compatibility between (HEs) and alien materials. The CRT is one of the small-scale safety tests performed on HE at the High Explosives Applications Facility (HEAF).

  11. Reactive power compensating system

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Timothy J. (Redondo Beach, CA); El-Sharkawi, Mohamed A. (Renton, WA); Venkata, Subrahmanyam S. (Seattle, WA)

    1987-01-01

    The reactive power of an induction machine is compensated by providing fixed capacitors on each phase line for the minimum compensation required, sensing the current on one line at the time its voltage crosses zero to determine the actual compensation required for each phase, and selecting switched capacitors on each line to provide the balance of the compensation required.

  12. Reactive Power Compensating System.

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Timothy J.; El-Sharkawi, Mohamed A.; Venkata, Subrahmanyam S.

    1985-01-04

    The circuit was designed for the specific application of wind-driven induction generators. It has great potential for application in any situation where a varying reactive power load is present, such as with induction motors or generators, or for transmission network compensation.

  13. The iodine reactivity

    International Nuclear Information System (INIS)

    2003-01-01

    The iodine is an important element because it has long life isotopes (such as iodine 129) and a great mobility in natural media. Iodine presents a complex chemistry because of its volatility and its strong redox reactivity. The S.E.C.R. works to better understand the reactivity of this element in different natural, industrial or biological environments. It plays a part in thermochemical sites as a possible way of hydrogen formation. This seminar gives some aspects relative to the chemical reactivity of iodine, since its thermochemistry in the I/S cycles to produce hydrogen to its reactivity in the natural medium and its potential radiological impact. This document includes 4 presentations transparencies) dealing with: the 129 I cycle rejected in the low radioactive gaseous and liquid effluents of the La Hague reprocessing plant (C. Frechou); a bibliographic review of iodine retention in soils (F. Bazer-Bachi); the hydrogen production and the iodine/sulfur thermochemical cycle (role of iodine in the process); and the direct characterization by electro-spray ionization mass spectroscopy of iodine fixation by fulvic acids (P. Reiller, B. Amekraz, C. Moulin, V. Moulin)

  14. Upscaling of reactive flows

    NARCIS (Netherlands)

    Kumar, K.

    2012-01-01

    The thesis deals with the upscaling of reactive flows in complex geometry. The reactions which may include deposition or dissolution take place at a part of the boundary and depending on the size of the reaction domain, the changes in the pore structure that are due to the deposition process may or

  15. Proceedings of the topical meeting on reactivity initiated accidents (RIA)

    International Nuclear Information System (INIS)

    2003-01-01

    The topical meeting was devoted to RIA fuel acceptance criteria, in particular to the fuel fragmentation enthalpy limit and the PCMI failure enthalpy limit in relation to high burnup fuel. In total 50 participants attended. Research and industry organisations from France, Finland, Germany, Hungary, Japan, the Russian Federation, Sweden, the United Kingdom and the USA including the Swiss regulatory body, HSK, and the Halden reactor project, presented 16 papers in all. The papers covered three main areas: 'best estimate' core calculations for RIA energy deposition in high burnup fuels, the technical background of current and new RIA fuel safety criteria, and ongoing RIA experimental programmes. A number of open issues were identified, whose resolution is expected from ongoing and planned national and international experimental programmes

  16. Manufacturing Initiative

    Data.gov (United States)

    National Aeronautics and Space Administration — The Advanced Manufacturing Technologies (AMT) Project supports multiple activities within the Administration's National Manufacturing Initiative. A key component of...

  17. The 'overlooked trio' of hypothetical terrorist nuclear weapons - reactor grade plutonium, neptunium-237 and tritium

    International Nuclear Information System (INIS)

    Sholly, S.

    2002-01-01

    Full text: Considerations revolving around physical protection of nuclear material are quite commonly and naturally focused on protecting weapons-grade plutonium (WGPu) and highly enriched uranium (HEU) from theft and diversion. These two materials are the center of attention because of their well-known (and demonstrated) potential for use in first-generation nuclear explosive devices of which potential terrorists are widely thought to be capable. They are also the center of attention because of retirements of these materials from military use as the Russian Federation and the United States reduce the number of nuclear weapons in their arsenals. Three other materials - an 'overlooked trio' - must also be borne in mind within this context: (1) reactor-grade plutonium (RGPu); (2) neptunium-237 (Np-237); and (3) tritium (H-3). Although there are still some authorities who either contend that RGPu cannot be used in a nuclear explosive or that there are (for a terrorist) insurmountable difficulties in doing so, the knowledgeable scientific and technical community, recognizes the potential utility of RGPu for hypothetical terrorist nuclear devices. A much smaller community of experts recognizes the usefulness of Np-237 for nuclear devices, but Np-237 is as straight-forwardly and easily usable as HEU and similarly abundant (but not often in separated form). Tritium can be used (with a modest increase in design sophistication) in a conventional first-generation nuclear device with any of the weapons-usable materials (WGPu, HEU, RGPu or Np-237) to increase the yield and/or increase the reliability of a non-fizzle yield. Given the presence of RGPu and Np-237 in abundant quantities in spent commercial reactor fuel, widely available knowledge of how to separate these materials, and a world-wide total of more than 400 nuclear power plants, spent reactor fuel also requires stringent controls. This is especially true of old spent fuel which has far less radiation dose

  18. Immune reactivities against gums.

    Science.gov (United States)

    Vojdani, Aristo; Vojdani, Charlene

    2015-01-01

    Different kinds of gums from various sources enjoy an extremely broad range of commercial and industrial use, from food and pharmaceuticals to printing and adhesives. Although generally recognized as safe by the US Food and Drug Administration (FDA), gums have a history of association with sensitive or allergic reactions. In addition, studies have shown that gums have a structural, molecular similarity to a number of common foods. A possibility exists for cross-reactivity. Due to the widespread use of gums in almost every aspect of modern life, the overall goal of the current investigation was to determine the degree of immune reactivity to various gum antigens in the sera of individuals representing the general population. The study was a randomized, controlled trial. 288 sera purchased from a commercial source. The sera was screened for immunoglobulin G (IgG) and immunoglobulin E (IgE) antibodies against extracts of mastic gum, carrageenan, xantham gum, guar gum, gum tragacanth, locust bean gum, and β-glucan, using indirect enzyme-linked immunosorbent assay (ELISA) testing. For each gum antigen, inhibition testing was performed on the 4 sera that showed the highest IgG and IgE immune reactivity against the different gums used in the study. Inhibition testing on these same sera for sesame albumin, lentil, corn, rice, pineapple, peanut, pea protein, shrimp, or kidney bean was used to determine the cross-reactivity of these foods with the gum. Of the 288 samples, 4.2%-27% of the specimens showed a significant elevation in IgG antibodies against various gums. Only 4 of 288, or 1.4%, showed a simultaneous elevation of the IgG antibody against all 7 gum extracts. For the IgE antibody, 15.6%-29.1% of the specimens showed an elevation against the various gums. A significant percentage of the specimens, 12.8%, simultaneously produced IgE antibodies against all 7 tested extracts. Overall, the percentage of elevation in IgE antibodies against different gum extracts, with

  19. Plutonium Worlds. Fast Breeders, Systems Analysis and Computer Simulation in the Age of Hypotheticality

    Directory of Open Access Journals (Sweden)

    Sebastian Vehlken

    2014-09-01

    Full Text Available This article examines the media history of one of the hallmark civil nuclear energy programs in Western Germany – the development of Liquid Metal Fast Breeder Reactor (LMFBR technology. Promoted as a kind of perpetuum mobile of the Atomic Age, the "German Manhattan Project" not only imported big science thinking. In its context, nuclear technology was also put forth as an avantgarde of scientific inquiry, dealing with the most complex and critical technological endeavors. In the face of the risks of nuclear technology, German physicist Wolf Häfele thus announced a novel epistemology of "hypotheticality". In a context where traditional experimental engineering strategies became inappropiate, he called for the application of advanced media technologies: Computer Simulations (CS and Systems Analysis (SA generated computerized spaces for the production of knowledge. In the course of the German Fast Breeder program, such methods had a twofold impact. One the one hand, Häfele emphazised – as the "father of the German Fast Breeder" – the utilization of CS for the actual planning and construction of the novel reactor type. On the other, namely as the director of the department of Energy Systems at the International Institute for Applied Systems Analysis (IIASA, Häfele advised SA-based projections of energy consumption. These computerized scenarios provided the rationale for the conception of Fast Breeder programs as viable and necessary alternative energy sources in the first place. By focusing on the role of the involved CS techniques, the paper thus investigates the intertwined systems thinking of nuclear facilities’s planning and construction and the design of large-scale energy consumption and production scenarios in the 1970s and 1980s, as well as their conceptual afterlives in our contemporary era of computer simulation.

  20. Effects of recent modeling developments in prompt burst hypothetical core disruptive accident calculations

    International Nuclear Information System (INIS)

    Sienicki, J.J.; Abramson, P.B.

    1978-01-01

    The main objective of the development of multifield, multicomponent thermohydrodynamic computer codes is the detailed study of hypothetical core disruptive accidents (HCDAs) in liquid-metal fast breeder reactors. The main contributions such codes are expected to make are the inclusion of detailed modeling of the relative motion of liquid and vapor (slip), the inclusion of modeling of nonequilibrium/nonsaturation thermodynamics, and the use of more detailed neutronics methods. Scoping studies of the importance of including these phenomena performed with the parametric two-field, two-component coupled neutronic/thermodynamic/hydrodynamic code FX2-TWOPOOL indicate for the prompt burst portion of an HCDA that: (1) Vapor-liquid slip plays a relatively insignificant role in establishing energetics, implying that analyses that do not model vapor-liquid slip may be adequate. Furthermore, if conditions of saturation are assumed to be maintained, calculations that do not permit vapor-liquid slip appear to be conservative. (2) The modeling of conduction-limited fuel vaporization and condensation causes the energetics to be highly sensitive to variations in the droplet size (i.e., in the parametric values) for the sizes of interest in HCDA analysis. Care must therefore be exercised in the inclusion of this phenomenon in energetics calculations. (3) Insignificant differences are observed between the use of space-time kinetics (quasi-static diffusion theory) and point kinetics, indicating again that point kinetics is normally adequate for analysis of the prompt burst portion of an HCDA. (4) No significant differences were found to result from assuming that delayed neutron precursors remain stationary where they are created rather than assuming that they move together with fuel. (5) There is no need for implicit coupling between the neutronics and the hydrodynamics/thermodynamics routines, even outside the prompt burst portion

  1. Hypothetical influence of non-indexed Spanish journals on the impact factor of radiological journals

    International Nuclear Information System (INIS)

    Miguel-Dasit, Alberto; Aleixandre, Rafael; Valderrama, Juan C.; Marti-Bonmati, Luis; Sanfeliu, Pilar

    2005-01-01

    Objective: The aim of this study was to analyze the hypothetical changes in the 2001 impact factor of 52 radiological journals included in the Science Citation Index-Journal Citation Reports by also counting cites proceeding from 73 Spanish journals on different medical specialties. Also, to estimate the possible impact factor of the official Spanish radiology journal, Radiologia, not included in this database. Materials and methods: A modified 2001 impact factor of 52 radiological journals and Radiologia was obtained by adding the number of cites in 1999 and 2000 from the medical Spanish journals. Data were obtained by consulting the 2001 edition of the Journal Citation Reports in the 'Web of Science' database. Results: The 16,985 bibliographical references were analysed (232 of them to radiological journals). The journal with the largest increase in its 2001 impact factor (from 1.83 to 1.90) was Radiologic Clinics of North America. European Journal of Radiology was the European journal with the highest increase (from 1.084 to 1.110) in the difference between the 2001 modified and original impact factor. The modified 2001 impact factor of the 34 American journals was statistically higher (P = 0.016) than that of the 18 European journals (1.64 versus 0.93). Differences between the 2001 modified and original impact factor were slightly higher in the American journals (no statistically significant difference). The 2001 impact factor of Radiologia was 0.056. Discussion: Differences between the 2001 original and modified impact factor were small, but larger in the American journals. The 2001 impact factor of Radiologia was modest, although similar to other publications included in the Journal Citation Reports

  2. Crystal Structure of VC0702 at 2.0 Angstrom: Conserved Hypothetical Protein from Vibrio Cholerae

    International Nuclear Information System (INIS)

    Ni, S.; Forouhar, F.; Bussiere, D.; Robinson, H.; Kennedy, M.

    2006-01-01

    VC0702, a conserved hypothetical protein of unknown function from Vibrio cholerae, resides in a three-gene operon containing the MbaA gene that encodes for a GGDEF and EAL domain-containing protein which is involved in regulating formation of the extracellular matrix of biofilms in Vibrio cholerae. The VC0702 crystal structure has been determined at 2.0 Angstroms and refined to R work = 22.8% and R free = 26.3%. VC0702 crystallized in an orthorhombic crystal lattice in the C2221 space group with dimensions of a = 66.61 Angstroms, b = 88.118 Angstroms, and c = 118.35 Angstroms with a homodimer in the asymmetric unit. VC0702, which forms a mixed α + β three-layered αβα sandwich, belongs to the Pfam DUF84 and COG1986 families of proteins. Sequence conservation within the DUF84 and COG1986 families was used to identify a conserved patch of surface residues that define a cleft and potential substrate-binding site in VC0702. The three-dimensional structure of VC0702 is similar to that of Mj0226 from Methanococcus janeschii, which has been identified as a novel NTPase that binds NTP in a deep cleft similarly located to the conserved patch of surface residues that define an analogous cleft in VC0702. Collectively, the data suggest that VC0702 may have a biochemical function that involves NTP binding and phosphatase activity of some kind, and is likely involved in regulation of the signaling pathway that controls biofilm formation and maintenance in Vibrio cholerae

  3. Pollutant Plume Dispersion over Hypothetical Urban Areas based on Wind Tunnel Measurements

    Science.gov (United States)

    Mo, Ziwei; Liu, Chun-Ho

    2017-04-01

    Gaussian plume model is commonly adopted for pollutant concentration prediction in the atmospheric boundary layer (ABL). However, it has a number of limitations being applied to pollutant dispersion over complex land-surface morphology. In this study, the friction factor (f), as a measure of aerodynamic resistance induced by rough surfaces in the engineering community, was proposed to parameterize the vertical dispersion coefficient (σz) in the Gaussian model. A series of wind tunnel experiments were carried out to verify the mathematical hypothesis and to characterize plume dispersion as a function of surface roughness as well. Hypothetical urban areas, which were assembled in the form of idealized street canyons of different aspect (building-height-to-street-width) ratios (AR = 1/2, 1/4, 1/8 and 1/12), were fabricated by aligning identical square aluminum bars at different separation apart in cross flows. Pollutant emitted from a ground-level line source into the turbulent boundary layer (TBL) was simulated using water vapour generated by ultrasonic atomizer. The humidity and the velocity (mean and fluctuating components) were measured, respectively, by humidity sensors and hot-wire anemometry (HWA) with X-wire probes in streamwise and vertical directions. Wind tunnel results showed that the pollutant concentration exhibits the conventional Gaussian distribution, suggesting the feasibility of using water vapour as a passive scalar in wind tunnel experiments. The friction factor increased with decreasing aspect ratios (widening the building separation). It was peaked at AR = 1/8 and decreased thereafter. Besides, a positive correlation between σz/xn (x is the distance from the pollutant source) and f1/4 (correlation coefficient r2 = 0.61) was observed, formulating the basic parameterization of plume dispersion over urban areas.

  4. RELAP5 analyses of two hypothetical flow reversal events for the advanced neutron source reactor

    Energy Technology Data Exchange (ETDEWEB)

    Chen, N.C.J.; Wendel, M.W.; Yoder, G.L. Jr. [Oak Ridge National Lab., TN (United States)

    1995-09-01

    This paper presents RELAP5 results of two hypothetical, low flow transients analyzed as part of the Advanced Neutron Source Reactor safety program. The reactor design features four independent coolant loops (three active and one in standby), each containing a main curculation pump (with battery powered pony motor), heat exchanger, an accumulator, and a check valve. The first transient assumes one of these pumps fails, and additionally, that the check valve in that loop remains stuck in the open position. This accident is considered extremely unlikely. Flow reverses in this loop, reducing the core flow because much of the coolant is diverted from the intact loops back through the failed loop. The second transient examines a 102-mm-diam instantaneous pipe break near the core inlet (the worst break location). A break is assumed to occur 90 s after a total loss-of-offsite power. Core flow reversal occurs because accumulator injection overpowers the diminishing pump flow. Safety margins are evaluated against four thermal limits: T{sub wall}=T{sub sat}, incipient boiling, onset of significant void, and critical heat flux. For the first transient, the results show that these limits are not exceeded (at a 95% non-exceedance probability level) if the pony motor battery lasts 30 minutes (the present design value). For the second transient, the results show that the closest approach of the fuel surface temperature to the local saturation temperature during core flow reversal is about 39{degrees}C. Therefore the fuel remains cool during this transient. Although this work is done specifically for the ANSR geometry and operating conditions, the general conclusions may be applicable to other highly subcooled reactor systems.

  5. Ultraviolet-B phototoxicity and hypothetical photomelanomagenesis: intraocular and crystalline lens photoprotection.

    Science.gov (United States)

    Mainster, Martin A; Turner, Patricia L

    2010-04-01

    Ultraviolet-B (UV-B) radiation can cause phototoxic macular injuries in young people who have been sunbathing but not sungazing and in welders. Welders have a reportedly increased risk of uveal melanoma. We analyze phakic and pseudophakic risks for solar and welding arc UV-B exposure. Optical radiation measurement, analysis, and perspective. Spectral transmittances were measured for UV-transmitting, UV-blocking, and blue-blocking intraocular lenses (IOLs). The photoprotective performances of crystalline and intraocular lenses were analyzed using relevant epidemiologic and laboratory data and action spectra for acute retinal phototoxicity and melanoma photocarcinogenesis. Crystalline lens UV-B retinal protection is deficient in children and young adults, increasing their potential susceptibility to acute retinal phototoxicity and hypothetical photomelanomagenesis. UV-B radiation has sufficient energy/photon to induce primary melanomagenic DNA lesions, unlike blue light or UV-A radiation. UV-blocking and blue-blocking IOLs have negligible UV-B transmittance. UV-transmitting IOL transmittance of UV-B radiation is equivalent to that of a 15-year-old crystalline lens. If optical radiation exposure is responsible for welders' increased risk of uveal melanoma, then UV-B radiation is the most probable causative agent and spectacle wear is a potential confounding factor in epidemiologic studies of ocular melanoma. Welders under 30 years of age are at greater risk for welding maculopathy than older welders. Children, adults under 30 years of age, and pseudophakic individuals with UV-transmitting IOLs should wear sunglasses in bright environments because of the UV-B window in their crystalline lenses or IOLs. Copyright 2010 Elsevier Inc. All rights reserved.

  6. Industrial CO2 emissions in China based on the hypothetical extraction method: Linkage analysis

    International Nuclear Information System (INIS)

    Wang, Yuan; Wang, Wenqin; Mao, Guozhu; Cai, Hua; Zuo, Jian; Wang, Lili; Zhao, Peng

    2013-01-01

    Fossil fuel-related CO 2 emissions are regarded as the primary sources of global climate change. Unlike direct CO 2 emissions for each sector, CO 2 emissions associated with complex linkages among sectors are usually ignored. We integrated the input–output analysis with the hypothetical extraction method to uncover the in-depth characteristics of the inter-sectoral linkages of CO 2 emissions. Based on China's 2007 data, this paper compared the output and demand emissions of CO 2 among eight blocks. The difference between the demand and output emissions of a block indicates that CO 2 is transferred from one block to another. Among the sectors analyzed in this study, the Energy industry block has the greatest CO 2 emissions with the Technology industry, Construction and Service blocks as its emission's primary destinations. Low-carbon industries that have lower direct CO 2 emissions are deeply anchored to high-carbon ones. If no effective measures are taken to limit final demand emissions or adjust energy structure, shifting to an economy that is low-carbon industries oriented would entail a decrease in CO 2 emission intensity per unit GDP but an increase in overall CO 2 emissions in absolute terms. The results are discussed in the context of climate-change policy. - Highlights: • Quantitatively analyze the characteristics of inter-industrial CO 2 emission linkages. • Propose the linkage measuring method of CO 2 emissions based on the modified HEM. • Detect the energy industry is a key sector on the output of embodied carbon. • Conclude that low-carbon industries are deeply anchored to high-carbon industries

  7. Identifying optimal agricultural countermeasure strategies for a hypothetical contamination scenario using the strategy model

    International Nuclear Information System (INIS)

    Cox, G.; Beresford, N.A.; Alvarez-Farizo, B.; Oughton, D.; Kis, Z.; Eged, K.; Thorring, H.; Hunt, J.; Wright, S.; Barnett, C.L.; Gil, J.M.; Howard, B.J.; Crout, N.M.J.

    2005-01-01

    A spatially implemented model designed to assist the identification of optimal countermeasure strategies for radioactively contaminated regions is described. Collective and individual ingestion doses for people within the affected area are estimated together with collective exported ingestion dose. A range of countermeasures are incorporated within the model, and environmental restrictions have been included as appropriate. The model evaluates the effectiveness of a given combination of countermeasures through a cost function which balances the benefit obtained through the reduction in dose with the cost of implementation. The optimal countermeasure strategy is the combination of individual countermeasures (and when and where they are implemented) which gives the lowest value of the cost function. The model outputs should not be considered as definitive solutions, rather as interactive inputs to the decision making process. As a demonstration the model has been applied to a hypothetical scenario in Cumbria (UK). This scenario considered a published nuclear power plant accident scenario with a total deposition of 1.7 x 10 14 , 1.2 x 10 13 , 2.8 x 10 10 and 5.3 x 10 9 Bq for Cs-137, Sr-90, Pu-239/240 and Am-241, respectively. The model predicts that if no remediation measures were implemented the resulting collective dose would be approximately 36 000 person-Sv (predominantly from 137 Cs) over a 10-year period post-deposition. The optimal countermeasure strategy is predicted to avert approximately 33 000 person-Sv at a cost of approximately pound 160 million. The optimal strategy comprises a mixture of ploughing, AFCF (ammonium-ferric hexacyano-ferrate) administration, potassium fertiliser application, clean feeding of livestock and food restrictions. The model recommends specific areas within the contaminated area and time periods where these measures should be implemented

  8. A hypothetical model for predicting the toxicity of high aspect ratio nanoparticles (HARN)

    Science.gov (United States)

    Tran, C. L.; Tantra, R.; Donaldson, K.; Stone, V.; Hankin, S. M.; Ross, B.; Aitken, R. J.; Jones, A. D.

    2011-12-01

    The ability to predict nanoparticle (dimensional structures which are less than 100 nm in size) toxicity through the use of a suitable model is an important goal if nanoparticles are to be regulated in terms of exposures and toxicological effects. Recently, a model to predict toxicity of nanoparticles with high aspect ratio has been put forward by a consortium of scientists. The High aspect ratio nanoparticles (HARN) model is a platform that relates the physical dimensions of HARN (specifically length and diameter ratio) and biopersistence to their toxicity in biological environments. Potentially, this model is of great public health and economic importance, as it can be used as a tool to not only predict toxicological activity but can be used to classify the toxicity of various fibrous nanoparticles, without the need to carry out time-consuming and expensive toxicology studies. However, this model of toxicity is currently hypothetical in nature and is based solely on drawing similarities in its dimensional geometry with that of asbestos and synthetic vitreous fibres. The aim of this review is two-fold: (a) to present findings from past literature, on the physicochemical property and pathogenicity bioassay testing of HARN (b) to identify some of the challenges and future research steps crucial before the HARN model can be accepted as a predictive model. By presenting what has been done, we are able to identify scientific challenges and research directions that are needed for the HARN model to gain public acceptance. Our recommendations for future research includes the need to: (a) accurately link physicochemical data with corresponding pathogenicity assay data, through the use of suitable reference standards and standardised protocols, (b) develop better tools/techniques for physicochemical characterisation, (c) to develop better ways of monitoring HARN in the workplace, (d) to reliably measure dose exposure levels, in order to support future epidemiological

  9. Effects of spent fuel types on offsite consequences of hypothetical accidents

    International Nuclear Information System (INIS)

    Courtney, J. C.; Dwight, C. C.; Lehto, M. A.

    2000-01-01

    Argonne National Laboratory (ANL) conducts experimental work on the development of waste forms suitable for several types of spent fuel at its facility on the Idaho National Engineering and Environmental Laboratory (INEEL) located 48 km West of Idaho Falls, ID. The objective of this paper is to compare the offsite radiological consequences of hypothetical accidents involving the various types of spent nuclear fuel handled in nonreactor nuclear facilities. The highest offsite total effective dose equivalents (TEDEs) are estimated at a receptor located about 5 km SSE of ANL facilities. Criticality safety considerations limit the amount of enriched uranium and plutonium that could be at risk in any given scenario. Heat generated by decay of fission products and actinides does not limit the masses of spent fuel within any given operation because the minimum time elapsed since fissions occurred in any form is at least five years. At cooling times of this magnitude, fewer than ten radionuclides account for 99% of the projected TEDE at offsite receptors for any credible accident. Elimination of all but the most important nuclides allows rapid assessments of offsite doses with little loss of accuracy. Since the ARF (airborne release fraction), RF (respirable fraction), LPF (leak path fraction) and atmospheric dilution factor (χ/Q) can vary by orders of magnitude, it is not productive to consider nuclides that contribute less than a few percent of the total dose. Therefore, only 134 Cs, 137 Cs- 137m Ba, and the actinides significantly influence the offsite radiological consequences of severe accidents. Even using highly conservative assumptions in estimating radiological consequences, they remain well below current Department of Energy guidelines for highly unlikely accidents

  10. A hypothetical model for predicting the toxicity of high aspect ratio nanoparticles (HARN)

    International Nuclear Information System (INIS)

    Tran, C. L.; Tantra, R.; Donaldson, K.; Stone, V.; Hankin, S. M.; Ross, B.; Aitken, R. J.; Jones, A. D.

    2011-01-01

    The ability to predict nanoparticle (dimensional structures which are less than 100 nm in size) toxicity through the use of a suitable model is an important goal if nanoparticles are to be regulated in terms of exposures and toxicological effects. Recently, a model to predict toxicity of nanoparticles with high aspect ratio has been put forward by a consortium of scientists. The High aspect ratio nanoparticles (HARN) model is a platform that relates the physical dimensions of HARN (specifically length and diameter ratio) and biopersistence to their toxicity in biological environments. Potentially, this model is of great public health and economic importance, as it can be used as a tool to not only predict toxicological activity but can be used to classify the toxicity of various fibrous nanoparticles, without the need to carry out time-consuming and expensive toxicology studies. However, this model of toxicity is currently hypothetical in nature and is based solely on drawing similarities in its dimensional geometry with that of asbestos and synthetic vitreous fibres. The aim of this review is two-fold: (a) to present findings from past literature, on the physicochemical property and pathogenicity bioassay testing of HARN (b) to identify some of the challenges and future research steps crucial before the HARN model can be accepted as a predictive model. By presenting what has been done, we are able to identify scientific challenges and research directions that are needed for the HARN model to gain public acceptance. Our recommendations for future research includes the need to: (a) accurately link physicochemical data with corresponding pathogenicity assay data, through the use of suitable reference standards and standardised protocols, (b) develop better tools/techniques for physicochemical characterisation, (c) to develop better ways of monitoring HARN in the workplace, (d) to reliably measure dose exposure levels, in order to support future epidemiological

  11. Experimental and theoretical studies of the reaction of the OH radical with alkyl sulfides: 3. Kinetics and mechanism of the OH initiated oxidation of dimethyl, dipropyl, and dibutyl sulfides: reactivity trends in the alkyl sulfides and development of a predictive expression for the reaction of OH with DMS.

    Science.gov (United States)

    Williams, M B; Campuzano-Jost, P; Hynes, A J; Pounds, A J

    2009-06-18

    A pulsed laser photolysis-pulsed laser-induced fluorescence technique has been employed to measure rate coefficients for the OH-initiated oxidation of dimethyl sulfide (DMS), its deuterated analog (DMS-d(6)), dipropyl sulfide (DPS), and dibutyl sulfide (DBS). Effective rate coefficients have been measured as a function of the partial pressure of O(2) over the temperature range of 240-295 K and at 200 and 600 Torr total pressure. We report the first observations of an O(2) enhancement in the effective rate coefficients for the reactions of OH with DPS and DBS. All observations are consistent with oxidation proceeding via a two-channel oxidation mechanism involving abstraction and addition channels. Structures and thermochemistry of the DPSOH and DBSOH adducts were calculated. Calculated bond strengths of adducts increase with alkyl substitution but are comparable to that of the DMSOH adduct and are consistent with experimental observations. Reactivity trends across the series of alkyl sulfide (C(2)-C(8)) reactions are analyzed. All reactions proceed via a two-channel mechanism involving either an H-atom abstraction or the formation of an OH adduct that can then react with O(2). Measurements presented in this work, in conjunction with previous measurements, have been used to develop a predictive expression for the OH-initiated oxidation of DMS. This expression is based on the elementary rate coefficients in the two-channel mechanism. The expression can calculate the effective rate coefficient for the reaction of OH with DMS over the range of 200-300 K, 0-760 Torr, and 0-100% partial pressure of O(2). This expression expands on previously published work but is applicable to DMS oxidation throughout the troposphere.

  12. Large-Eddy Simulation of Chemically Reactive Pollutant Transport from a Point Source in Urban Area

    Science.gov (United States)

    Du, Tangzheng; Liu, Chun-Ho

    2013-04-01

    Most air pollutants are chemically reactive so using inert scalar as the tracer in pollutant dispersion modelling would often overlook their impact on urban inhabitants. In this study, large-eddy simulation (LES) is used to examine the plume dispersion of chemically reactive pollutants in a hypothetical atmospheric boundary layer (ABL) in neutral stratification. The irreversible chemistry mechanism of ozone (O3) titration is integrated into the LES model. Nitric oxide (NO) is emitted from an elevated point source in a rectangular spatial domain doped with O3. The LES results are compared well with the wind tunnel results available in literature. Afterwards, the LES model is applied to idealized two-dimensional (2D) street canyons of unity aspect ratio to study the behaviours of chemically reactive plume over idealized urban roughness. The relation among various time scales of reaction/turbulence and dimensionless number are analysed.

  13. Bearing for the reactivation

    International Nuclear Information System (INIS)

    Santamaria Alexandra

    2003-01-01

    Ecopetrol undertook an aggressive plan to reactivate the activities of seismic that allows fulfilling the goals proposed for this year (2003). Although the production registered a descent of 9%, the financial results throw utilities for $1.1 trillion pesos to the closing of September and contributions in bonuses for $1.2 trillions. The author also refers to the general balance, to the finances, raw production, taxes and transfers

  14. Take Me Out to the Ballgame, but Keep Me away from the Concession Stand Workers: A Hypothetical Case Involving Negligent Volunteers at Ballparks

    Science.gov (United States)

    Thor, Jennifer Cordon; York, Kenneth M.

    2016-01-01

    The hypothetical case presented in this article challenges students in a legal environment of business course to answer that question by examining key legal concepts in agency and contract law, and to conduct an ethical analysis in a case involving volunteers. Although the events in the following case are hypothetical, the contract that the…

  15. Iodine-catalyzed diazo activation to access radical reactivity.

    Science.gov (United States)

    Li, Pan; Zhao, Jingjing; Shi, Lijun; Wang, Jin; Shi, Xiaodong; Li, Fuwei

    2018-05-17

    Transition-metal-catalyzed diazo activation is a classical way to generate metal carbene, which are valuable intermediates in synthetic organic chemistry. An alternative iodine-catalyzed diazo activation is disclosed herein under either photo-initiated or thermal-initiated conditions, which represents an approach to enable carbene radical reactivity. This metal-free diazo activation strategy were successfully applied into olefin cyclopropanation and epoxidation, and applying this method to pyrrole synthesis under thermal-initiated conditions further demonstrates the unique reactivity using this method over typical metal-catalyzed conditions.

  16. Unilateral initiatives

    International Nuclear Information System (INIS)

    Anon.

    1988-01-01

    This paper reports on arms control which is generally thought of in terms of formal negotiations with an opponent, with the resulting agreements embodied in a treaty. This is not surprising, since arms control discussions between opponents are both important and politically visible. There are, however, strong reasons for countries to consider and frequently take unilateral initiatives. To do so is entirely consistent with the established major precepts of arms control which state that arms control is designed to reduce the risk of war, the costs of preparing for war, and the death and destruction if war should come. Unilateral initiatives on what weapons are purchased, which ones are eliminated and how forces are deployed can all relate to these objectives. There are two main categories of motives for unilateral initiatives in arms control. In one category, internal national objectives are the dominant, often sole, driving force; the initiative is undertaken for our own good

  17. Ports Initiative

    Science.gov (United States)

    EPA's Ports Initiative works in collaboration with the port industry, communities, and government to improve environmental performance and increase economic prosperity. This effort helps people near ports breath cleaner air and live better lives.

  18. The structure of the hypothetical protein smu.1377c from Streptococcus mutans suggests a role in tRNA modification

    International Nuclear Information System (INIS)

    Fu, Tian-Min; Liu, Xiang; Li, Lanfen; Su, Xiao-Dong

    2010-01-01

    The crystal structure of smu.1377c, a hypothetical protein from S. mutans, shows a similar fold to Sua5-YciO-YrdC-family proteins and indicates its functional role in tRNA modification. Members of the Sua5-YciO-YrdC protein family are found in both eukaryotes and prokaryotes and possess a conserved α/β twisted open-sheet fold. The Escherichia coli protein YrdC has been shown to be involved in modification of tRNA. The crystal structure of smu.1377c, a hypothetical protein from Streptococcus mutans, has been determined to 2.25 Å resolution. From structure analysis and comparison, it is shown that smu.1377c is a member of the Sua5-YciO-YrdC family and that it may play the same role as E. coli YrdC

  19. An Analysis of Reactor Structural Response to Fuel Sodium Interaction in a Hypothetical Core Disruptive Accident

    International Nuclear Information System (INIS)

    Suzuki, K.; Tashiro, M.; Sasanuma, K.; Nagashima, K.

    1976-01-01

    This study shows the effect of constraints around FSI zone on FSI phenomena and deformations of reactor structures. SUGAR-PISCES code system has been developed to evaluate the phenomena of FSI and the response of reactor structure. SUGAR calculates the phenomena of FSI. PISCES, developed by Physics International Company in U.S.A, calculates the dynamic response of reactor structure in two-dimensional, time-dependent finite-difference Lagrangian model. The results show that the peak pressure and energy by FSI and the deformation of reactor structures are about twice in case of FSI zone surrounding by blanket than by coolant. The FSI phenomena highly depend on the reactor structure and the realistic configuration around core must be considered for analyzing hypothetical core disruptive accident. In conclusion: FSI phenomena depend highly on constraints around FSI zone, so that the constraints must be dealt with realistically in analytical models. Although a two-dimensional model is superior to a quasi-two-dimensional model. The former needs long calculation time, so it is very expensive using in parametric study. Therefore, it is desirable that the two-dimensional model is used in the final study of reactor design and the quasi-two-dimensional model is used in parametric study. The blanket affects on the acoustic pressure and the deformations of radial structures, but affects scarcely on the upper vessel deformation. The blanket also affects on the mechanical work largely. The core barrel gives scarcely the effects on pressure in single phase but gives highly the effects on pressure in two-phase and deformation of reactor structures in this study. For studying the more realistic phenomena of FSI in the reactor design, the following works should be needed. (i) Spatial Distribution of FSI Region Spatial and time-dependent distribution of fuel temperature and molten fuel fraction must be taken in realistic simulation of accident condition. To this purpose, the code will

  20. Proliferation resistance of a hypothetical sodium fast reactor under an assumed breakout scenario

    Energy Technology Data Exchange (ETDEWEB)

    Whitlock, Jeremy [Non-Proliferation and Safeguards, AECL Chalk River Laboratories, Stn. 91, Chalk River, Ontario, K0J 1J0 (Canada); Inoue, Naoko; Senzaki, Masao [Japan Atomic Energy Agency - JAEA (Japan); Bley, Dennis [Buttonwood Consulting Inc., Oakton, VA (United States); Wonder, Ed [National Nuclear Security Administration, Department of Energy (United States)

    2009-06-15

    The Proliferation Resistance and Physical Protection (PR and PP) Working Group of the Generation IV International Forum (GIF) conducted a high-level pathway analysis of a hypothetical sodium fast reactor and integral fuel processing facility (called collectively the 'Example Sodium Fast Reactor' or ESFR), as a test of the effectiveness of its analysis methodology. From a common set of assumed host-state capabilities and objectives, a number of threat scenarios emerge (Concealed Diversion, Concealed Misuse, Breakout or Overt Misuse, and Theft/Sabotage). This paper presents the results of the analysis based on the Breakout scenario. A distinguishing aspect of Breakout scenario consideration concerns the optimal use of the time from breakout to weapons readiness, which is related to the Proliferation Time measure. The goal of analyzing the breakout scenario was therefore to complement other analyses involving the Concealed Misuse and Diversion scenarios by exploring the minimum post-breakout time to weapons readiness. Four target strategies were chosen for analysis: (1) Diversion of LEU feed material at front-end of the ESFR facility; (2) Misuse of the reactor facility to irradiate fertile material; (3) Misuse of the reactor facility to irradiate material in the in-core fuel storage basket; and (4) Misuse of the fuel processing facility to higher-purity TRU. The investigation identified several general 'sub-strategies' within the Breakout scenario, dependent upon the aggressiveness with which a State pursues its intent to break out (including its aversion to the risk of detection). The sub-strategy chosen by a proliferant state will affect both the time available and potential complexity for proliferation activities. The sub-strategy chosen is itself affected by political factors (foreign relations agenda of state, probability of external intervention after breakout, external dependence of proliferant state's supply chain, etc.) These factors

  1. Simulation of a hypothetical core disruptive accident in the mars test-facility

    International Nuclear Information System (INIS)

    Robbe, M.F.; Lepareux, M.

    2001-01-01

    In France, a large experimental programme MARA/MARS was undertaken in the 80's to estimate the mechanical consequences of an HCDA (Hypothetical Core Disruptive Accident) and to validate the SIRIUS computer code used at that time for the numerical simulations. At the end of the 80's, it was preferred to add a HCDA sodium-bubble-argon tri-component constitutive law to the general ALE fast dynamics finite element CASTEM-PLEXUS code rather than going on developing and using the specialized SIRIUS code. The experimental results of the MARA programme were used in the 90's to validate and qualify the CASTEM-PLEXUS code. A first series of computations of the tests MARA 8, MARA 10 and MARS was realised. The simulations showed a rather good agreement between the experimental and computed results for the MARA 8 and MARA 10 tests - even if there were some discrepancies - but the prediction of the MARS structure displacements and strains was overestimated. This conservatism was supposed to come from the fact that several MARS non axisymmetric structures like core elements, pumps and heat exchangers were not represented in the CASTEM-PLEXUS model. These structures, acting as porous barriers, had a protective effect on the mock-up containment by absorbing energy and slowing down the fluid impacting the containment. For these reasons, we developed in CASTEM-PLEXUS a new HCDA constitutive law taking into account the presence of the internal structures (without meshing them) by means of an equivalent porosity method. In other respects, the process used for dealing with the fluid-structure coupling in CASTEM-PLEXUS was improved. Thus a second series of simulations of the tests MARA8 and MARA10 was realised. A simulation of the test MARS was carried out too with the same simplified representation of the peripheral structures as in order to estimate the improvement provided by the new fluid-structure coupling. This paper presents a third numerical simulation of the MARS test with the

  2. Risks and consequences of a hypothetical radiological accident on nuclear powered submarine traversing Suez canal

    International Nuclear Information System (INIS)

    Salama, Mohamed

    2008-01-01

    Full text: Egypt has unique problem in Suez Canal, although there are, a number of radioactive Cargos traveling through the Canal which includes new and spent reactor fuel and about 100 metric tons of uranium hexafluoride each year, under the regulatory control of the Egyptian Atomic Energy Authority, there is, still a major problem concerning the passage of a number of nuclear powered vessels and submarines passing through the canal several times each year. The passage of these vessels and submarines has a political situation and not under the regulatory control of the Egyptian regulatory body. In spite of all precautions that are taken, in the nuclear powered vessels and submarines from the point of view of the rugged design of the reactor plant, multiple safety systems and operation with exceptional consideration for safety. Although of all of these a potential for a serious accident may does arise, even though, its probability is minimal. The Government of Egypt has established a national radiological emergency plan in order to cope with any radiological accidents, which may arise inside the country. Suez Canal lies in the north east of Egypt, and passes through a zone of considerable business, agriculture and industrial activities. The zone consists of three populated provinces, Port Said, Ismailia and Suez. According to Suez Canal authority regulations it is not allowed for these vessels and submarines to be landed in port. The motivation of the present paper was undertaken to discuss a hypothetical nuclear reactor accident aboard a nuclear powered submarine occurred during its passage in the Suez Canal. Such an accident will produce a radioactive cloud containing a number of radioactive materials. In such type of accidents contamination and causality zones, could extend to several kilometers. The different phases of the accident are going to be discussed and analyzed. The emergency actions taken during the accident phases are going to be presented. The

  3. Consequences in Norway after a hypothetical accident at Sellafield - Predicted impacts on the environment

    International Nuclear Information System (INIS)

    Thoerring, H.; Ytre-Eide, M.A.; Liland, A.

    2010-12-01

    This report describes the possible environmental consequences for Norway due to a hypothetical accident at the Sellafield complex in the UK. The scenario considered involves an explosion and fire at the B215 facility resulting in a 1 % release of the total HAL (Highly Active liquor) inventory of radioactive waste with a subsequent air transport and deposition in Norway. Air transport modelling is based on real meteorological data from October 2008 with wind direction towards Norway and heavy precipitation. This weather is considered to be quite representative as typical seasonal weather. Based on this weather scenario, the estimated fallout in Norway will be ∼ 17 P Bq of caesium-137 which is 7 times higher than the fallout from the Chernobyl accident. The modelled radioactive contamination is linked with data on transfer to the food chain and statistics on production and hunting to assess the consequences for foodstuffs. The investigation has been limited to the terrestrial environment, focussing on wild berries, fungi, and animals grazing unimproved pastures (i.e. various types of game, reindeer, sheep and goats). The predicted consequences are severe - especially in connection to sheep and goat production. Up to 80 % of the lambs in Norway could be exceeding the food intervention levels for radiocaesium the first years after the fallout, with 30-40 % likely to be above for many years. There will, consequently, be a need for extensive countermeasures in large areas for years or even decades involving several hundred thousand animals each year. Large consequences are also expected for reindeer husbandry - the first year in particular due to the time of fallout which is just prior to winter slaughter. The consequences will be most sever for reindeer herding in middle and southern parts of Norway, but problems may reach as far north as Finnmark where we find the majority of Norwegian reindeer production. The consequences for game will mostly depend on the regional

  4. Chronic Pain as a Hypothetical Construct: A Practical and Philosophical Consideration

    Directory of Open Access Journals (Sweden)

    Daniel M. Doleys

    2017-04-01

    Full Text Available Pain has been defined by the International Association for the Study of Pain (IASP as “an unpleasant sensory and emotional experience associated with actual or potential tissue damage, or described in terms of such damage.” Chronic pain is usually described as pain that has persisted for 3–6 months and/or beyond the expected time of healing. The numerical pain rating (NPR is the customary metric and often considered as a proxy for the subjective experience of chronic pain. This definition of pain (chronic has been of significant heuristic value. However, the definition and the models it has spawned tend to encourage the interpretation of pain as a measurable entity and implies that the patient’s experience of pain can be fully comprehended by someone other than the person in pain. Several major models of pain have been scrutinized and found to propagate the notion of pain as a ‘thing’ and fall prey to biomedical reductionism and Cartesian (mind-body dualism. Furthermore, the NPR does not appear to capture the complexity of chronic pain and correlates poorly with other clinically meaningful outcomes. It, and other aspects of the current notion of chronic pain, appear to be an extension of our reliance on the philosophical principles of reductionism and materialism. These and other shortcomings identified in the IASP definition have resulted in an increased interest in a reexamination and possible updating of our view of pain (chronic and its definition. The present paper describes an alternative view of pain, in particular chronic pain. It argues that chronic pain should be understood as a separate phenomenon from, rather than an extension of, acute pain and interpreted as a hypothetical construct (HC. HCs are contrasted to intervening variables (IV and the use of HCs in science is illustrated. The acceptance of the principles of nonlinearity and emergence are seen as important characteristics. The practical implications and barriers

  5. Consequences in Norway after a hypothetical accident at Sellafield - Predicted impacts on the environment

    Energy Technology Data Exchange (ETDEWEB)

    Thoerring, H.; Ytre-Eide, M.A.; Liland, A.

    2010-12-15

    This report describes the possible environmental consequences for Norway due to a hypothetical accident at the Sellafield complex in the UK. The scenario considered involves an explosion and fire at the B215 facility resulting in a 1 % release of the total HAL (Highly Active liquor) inventory of radioactive waste with a subsequent air transport and deposition in Norway. Air transport modelling is based on real meteorological data from October 2008 with wind direction towards Norway and heavy precipitation. This weather is considered to be quite representative as typical seasonal weather. Based on this weather scenario, the estimated fallout in Norway will be approx 17 P Bq of caesium-137 which is 7 times higher than the fallout from the Chernobyl accident. The modelled radioactive contamination is linked with data on transfer to the food chain and statistics on production and hunting to assess the consequences for foodstuffs. The investigation has been limited to the terrestrial environment, focussing on wild berries, fungi, and animals grazing unimproved pastures (i.e. various types of game, reindeer, sheep and goats). The predicted consequences are severe - especially in connection to sheep and goat production. Up to 80 % of the lambs in Norway could be exceeding the food intervention levels for radiocaesium the first years after the fallout, with 30-40 % likely to be above for many years. There will, consequently, be a need for extensive countermeasures in large areas for years or even decades involving several hundred thousand animals each year. Large consequences are also expected for reindeer husbandry - the first year in particular due to the time of fallout which is just prior to winter slaughter. The consequences will be most sever for reindeer herding in middle and southern parts of Norway, but problems may reach as far north as Finnmark where we find the majority of Norwegian reindeer production. The consequences for game will mostly depend on the

  6. Climate Risk Informed Decision Analysis: A Hypothetical Application to the Waas Region

    Science.gov (United States)

    Gilroy, Kristin; Mens, Marjolein; Haasnoot, Marjolijn; Jeuken, Ad

    2016-04-01

    More frequent and intense hydrologic events under climate change are expected to enhance water security and flood risk management challenges worldwide. Traditional planning approaches must be adapted to address climate change and develop solutions with an appropriate level of robustness and flexibility. The Climate Risk Informed Decision Analysis (CRIDA) method is a novel planning approach embodying a suite of complementary methods, including decision scaling and adaptation pathways. Decision scaling offers a bottom-up approach to assess risk and tailors the complexity of the analysis to the problem at hand and the available capacity. Through adaptation pathway,s an array of future strategies towards climate robustness are developed, ranging in flexibility and immediacy of investments. Flexible pathways include transfer points to other strategies to ensure that the system can be adapted if future conditions vary from those expected. CRIDA combines these two approaches in a stakeholder driven process which guides decision makers through the planning and decision process, taking into account how the confidence in the available science, the consequences in the system, and the capacity of institutions should influence strategy selection. In this presentation, we will explain the CRIDA method and compare it to existing planning processes, such as the US Army Corps of Engineers Principles and Guidelines as well as Integrated Water Resources Management Planning. Then, we will apply the approach to a hypothetical case study for the Waas Region, a large downstream river basin facing rapid development threatened by increased flood risks. Through the case study, we will demonstrate how a stakeholder driven process can be used to evaluate system robustness to climate change; develop adaptation pathways for multiple objectives and criteria; and illustrate how varying levels of confidence, consequences, and capacity would play a role in the decision making process, specifically

  7. A critical review of Jan Beyea's report: A study of some of the consequences of hypothetical reactor accidents at Barsebaeck

    International Nuclear Information System (INIS)

    Gjoerup, H.L.; Hedemann Jensen, P.; Jensen, N.O.; Pejtersen, V.; Lundtang Petersen, E.; Petersen, T.; Thykier-Nielsen, S.; Heikel Vinther, F.

    1978-04-01

    This report contains a critical review of Jan Beyea's report: A study of some of the consequences of hypothetical reactor accidents at Barsebaeck (Princeton University, January 1978). Unreasonable assumptions concerning dry deposition, plume rise, meteorological considerations, dose-response relationship and probability distributions were found in the report. It is found that the conclusions of the Beyea report are the result of a mathematical exercise rather than the results of a realistic risk evaluation for Barsebaeck. (author)

  8. Early Site Permit Demonstration Program, plant parameters envelopes: Comparison with ranges of values for four hypothetical sites

    International Nuclear Information System (INIS)

    1992-09-01

    The purpose of this volume is to report the results of the comparison of the ALWR plan parameters envelope with values of site characteristics developed for our hypothetical sites that generally represent conditions encountered within the United States. This effort is not intended to identify or address the suitability of any existing site, site area, or region in the United States. Also included in this volume is Appendix F, SERCH Summaries Regarding Siting

  9. Inventory of programs. Calculation of the isotope inventory after a hypothetical accident at the Cofrentes Nuclear power

    International Nuclear Information System (INIS)

    Albendea, M.

    2014-01-01

    Iberdrola is developing a new application to calculate the inventory of radiological material, then of a hypothetical accident, with the name of inventory. This application allows you to calculate the inventory isotopic, analysers and accurate thermal of all or part of the nucleus of the plant of Cofrentes, even of any single element, based on its history of irradiation and specific periods of decay, since the reactor at any time after the shutdown. (Author)

  10. Programming Reactive Extensions and LINQ

    CERN Document Server

    Liberty, Jesse

    2011-01-01

    Pro Reactive Extensions and LINQ is a deep dive into the next important technology for .NET developers: Reactive Extensions. This in-depth tutorial goes beyond what is available anywhere else to teach how to write WPF, Silverlight, and Windows Phone applications using the Reactive Extensions (Rx) to handle events and asynchronous method calls. Reactive programming allows you to turn those aspects of your code that are currently imperative into something much more event-driven and flexible. For this reason, it's sometimes referred to as LINQ for Events. Reactive programming hinges on the concep

  11. Streaming Pool: reuse, combine and create reactive streams with pleasure

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    When connecting together heterogeneous and complex systems, it is not easy to exchange data between components. Streams of data are successfully used in industry in order to overcome this problem, especially in the case of "live" data. Streams are a specialization of the Observer design pattern and they provide asynchronous and non-blocking data flow. The ongoing effort of the ReactiveX initiative is one example that demonstrates how demanding this technology is even for big companies. Bridging the discrepancies of different technologies with common interfaces is already done by the Reactive Streams initiative and, in the JVM world, via reactive-streams-jvm interfaces. Streaming Pool is a framework for providing and discovering reactive streams. Through the mechanism of dependency injection provided by the Spring Framework, Streaming Pool provides a so called Discovery Service. This object can discover and chain streams of data that are technologically agnostic, through the use of Stream IDs. The stream to ...

  12. Statistical equivalence and test-retest reliability of delay and probability discounting using real and hypothetical rewards.

    Science.gov (United States)

    Matusiewicz, Alexis K; Carter, Anne E; Landes, Reid D; Yi, Richard

    2013-11-01

    Delay discounting (DD) and probability discounting (PD) refer to the reduction in the subjective value of outcomes as a function of delay and uncertainty, respectively. Elevated measures of discounting are associated with a variety of maladaptive behaviors, and confidence in the validity of these measures is imperative. The present research examined (1) the statistical equivalence of discounting measures when rewards were hypothetical or real, and (2) their 1-week reliability. While previous research has partially explored these issues using the low threshold of nonsignificant difference, the present study fully addressed this issue using the more-compelling threshold of statistical equivalence. DD and PD measures were collected from 28 healthy adults using real and hypothetical $50 rewards during each of two experimental sessions, one week apart. Analyses using area-under-the-curve measures revealed a general pattern of statistical equivalence, indicating equivalence of real/hypothetical conditions as well as 1-week reliability. Exceptions are identified and discussed. Copyright © 2013 Elsevier B.V. All rights reserved.

  13. Paying the price: a cross-sectional survey of Australian socioeconomically disadvantaged smokers' responses to hypothetical cigarette price rises.

    Science.gov (United States)

    Guillaumier, Ashleigh; Bonevski, Billie; Paul, Christine; D'Este, Catherine; Doran, Christopher; Siahpush, Mohammad

    2014-03-01

    Increases in tobacco taxation can lead to reductions in tobacco consumption and prevalence of use across social groups. However, use of price-minimisation strategies to manage current and future tobacco use and the role of financial stress is less understood. This study aimed to measure the effect of cigarette price increases on price-minimisation strategy endorsement and financial stress among socioeconomically disadvantaged smokers. Community service organisation welfare recipients in NSW, Australia completed a touchscreen survey. Smoking history, financial stress, highest price to quit and responses to hypothetical cigarette price increases were assessed. Participants were 354 smokers (response rate = 79%). Most participants received income from a government pension (95%), earned price rises, significantly more participants endorsed trying to quit in response to the larger increase scenario (P price-minimisation strategies (e.g. switching to cheaper brands/products) were endorsed, but remained constant across hypothetical scenarios; level of financial stress appeared to have little influence. Smokers indicating they would not change their smoking in response to price rises had higher levels of nicotine dependence. Socially disadvantaged smokers endorsed numerous price-minimising strategies to maintain smoking at hypothetically increased costs. Larger cigarette price rises motivated more smokers to consider quitting, while price-resistant smokers appeared to have a more entrenched smoker status. © 2013 Australasian Professional Society on Alcohol and other Drugs.

  14. Reactivity costs in MARIA reactor

    International Nuclear Information System (INIS)

    Marcinkowska, Zuzanna E.; Pytel, Krzysztof M.; Frydrysiak, Andrzej

    2017-01-01

    Highlights: • The methodology for calculating consumed fuel cost of excess reactivity is proposed. • Correlation between time integral of the core excess reactivity and released energy. • Reactivity price gives number of fuel elements required for given excess reactivity. - Abstract: For the reactor operation at high power level and carrying out experiments and irradiations the major cost of reactor operation is the expense of nuclear fuel. In this paper the methodology for calculating consumed fuel cost-relatedness of excess reactivity is proposed. Reactivity costs have been determined on the basis of operating data. A number of examples of calculating the reactivity costs for processes such as: strong absorbing material irradiation, molybdenium-99 production, beryllium matrix poisoning and increased moderator temperature illustrates proposed method.

  15. Reactive Melt Infiltration Of Silicon Into Porous Carbon

    Science.gov (United States)

    Behrendt, Donald R.; Singh, Mrityunjay

    1994-01-01

    Report describes study of synthesis of silicon carbide and related ceramics by reactive melt infiltration of silicon and silicon/molybdenum alloys into porous carbon preforms. Reactive melt infiltration has potential for making components in nearly net shape, performed in less time and at lower temperature. Object of study to determine effect of initial pore volume fraction, pore size, and infiltration material on quality of resultant product.

  16. Latent Virus Reactivation: From Space to Earth

    Science.gov (United States)

    Mehta, Satish K.; Cohrs, Randall J.; Gilden, Donald H.; Tyring, Stephen K.; Castro, Victoria A.; Ott, C. Mark; Pierson, Duane L.

    2010-01-01

    Reactivation of latent viruses is a recognized consequence of decreased immunity. More recently viral reactivation has been identified as an important in vivo indicator of clinically relevant immune changes. Viral reactivation can be determined quickly and easily by the presence of virus in saliva and other body fluids. Real-time polymerase chain reaction (PCR) is a highly sensitive and specific molecular method to detect the presence of specific viral DNA. Studies in astronauts demonstrated that herpes simplex virus type 1(HSV-1), Epstein-Barr Virus (EBV), cytomegalovirus (CMV), and varicella zoster virus (VZV) reactivate at rates above normal during and after spaceflight in response to moderately decreased T-cell immunity. This technology was expanded to patients on Earth beginning with human immune deficiency virus (HIV) immuno-compromised patients. The HIV patients shed EBV in saliva at rates 9-fold higher than observed in astronauts demonstrating that the level of EBV shedding reflects the severity of impaired immunity. Whereas EBV reactivation is not expected to produce serious effects in astronauts on missions of 6 months or less, VZV reactivation in astronauts could produce shingles. Reactivation of live, infectious VZV in astronauts with no symptoms was demonstrated in astronauts during and after spaceflight. We applied our technology to study VZV-induced shingles in patients. In a study of 54 shingles patients, we showed salivary VZV was present in every patient on the day antiviral (acyclovir) treatment was initiated. Pain and skin lesions decreased with antiviral treatment. Corresponding decreases in levels of VZV were also observed and accompanied recovery. Although the level of VZV in shingles patients before the treatment was generally higher than those found in astronauts, lower range of VZV numbers in shingles patients overlapped with astronaut s levels. This suggests a potential risk of shingles to astronauts resulting from reactivation of VZV. In

  17. Reactivity insertion accident analysis

    International Nuclear Information System (INIS)

    Moreira, J.M.L.; Nakata, H.; Yorihaz, H.

    1990-04-01

    The correct prediction of postulated accidents is the fundamental requirement for the reactor licensing procedures. Accident sequences and severity of their consequences depend upon the analysis which rely on analytical tools which must be validated against known experimental results. Present work presents a systematic approach to analyse and estimate the reactivity insertion accident sequences. The methodology is based on the CINETHICA code which solves the point-kinetics/thermohydraulic coupled equations with weighted temperature feedback. Comparison against SPERT experimental results shows good agreement for the step insertion accidents. (author) [pt

  18. Assessment of environmental public exposure from a hypothetical nuclear accident for Unit-1 Bushehr nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Sohrabi, M.; Ghasemi, M.; Amrollahi, R.; Khamooshi, C.; Parsouzi, Z. [Amirkabir University of Technology, Health Physics and Dosimetry Research Laboratory, Department of Physics, Tehran (Iran, Islamic Republic of)

    2013-05-15

    Unit-1 of the Bushehr nuclear power plant (BNPP-1) is a VVER-type reactor with 1,000-MWe power constructed near Bushehr city at the coast of the Persian Gulf, Iran. The reactor has been recently operational to near its full power. The radiological impact of nuclear power plant (NPP) accidents is of public concern, and the assessment of radiological consequences of any hypothetical nuclear accident on public exposure is vital. The hypothetical accident scenario considered in this paper is a design-basis accident, that is, a primary coolant leakage to the secondary circuit. This scenario was selected in order to compare and verify the results obtained in the present paper with those reported in the Final Safety Analysis Report (FSAR 2007) of the BNPP-1 and to develop a well-proven methodology that can be used to study other and more severe hypothetical accident scenarios for this reactor. In the present study, the version 2.01 of the PC COSYMA code was applied. In the early phase of the accidental releases, effective doses (from external and internal exposures) as well as individual and collective doses (due to the late phase of accidental releases) were evaluated. The surrounding area of the BNPP-1 within a radius of 80 km was subdivided into seven concentric rings and 16 sectors, and distribution of population and agricultural products was calculated for this grid. The results show that during the first year following the modeled hypothetical accident, the effective doses do not exceed the limit of 5 mSv, for the considered distances from the BNPP-1. The results obtained in this study are in good agreement with those in the FSAR-2007 report. The agreement obtained is in light of many inherent uncertainties and variables existing in the two modeling procedures applied and proves that the methodology applied here can also be used to model other severe hypothetical accident scenarios of the BNPP-1 such as a small and large break in the reactor coolant system as well

  19. Measurements of total OH reactivity during PROPHET-AMOS 2016

    Science.gov (United States)

    Rickly, P.; Sakowski, J.; Bottorff, B.; Lew, M.; Stevens, P. S.; Sklaveniti, S.; Locoge, N.; Dusanter, S.

    2017-12-01

    As one of the main oxidant in the atmosphere, the hydroxyl radical (OH) initiates the oxidation of volatile organic compounds that can lead to the formation of ozone and secondary organic aerosols. Understanding both the sources and sinks of OH is therefore important to address issues related to air quality and climate change. Measurements of total OH reactivity can provide an important test of our understanding of the OH radical budget. Recent measurements of total reactivity in many environments have been greater than calculated based on the measured concentration of VOCs, suggesting that important OH sinks in these environments are not well characterized. Measurements of total OH reactivity were performed in a forested environment during the PROPHET - AMOS field campaign (Program for Research on Oxidants: PHotochemisty, Emissions, and Transport - Atmospheric Measurements of Oxidants in Summer) using the Comparative Reactivity Method (CRM) and the Total OH Loss Rate Method (TOHLM). The site is characterized by large emissions of isoprene and monoterpenes and low anthropogenic influence. Measurements of total OH reactivity using these two techniques agree to within their respective uncertainties, giving confidence in the measured OH reactivity. In addition, measurements of trace gases (VOCs, NOx, O3) were used to perform a comprehensive apportionment of OH sinks. These measurements are used in a chemical model using the Master Chemical Mechanism to calculate the expected OH reactivity. The results will be compared to previous measurements of total OH reactivity at this site.

  20. Reactive documentation system

    Science.gov (United States)

    Boehnlein, Thomas R.; Kramb, Victoria

    2018-04-01

    Proper formal documentation of computer acquired NDE experimental data generated during research is critical to the longevity and usefulness of the data. Without documentation describing how and why the data was acquired, NDE research teams lose capability such as their ability to generate new information from previously collected data or provide adequate information so that their work can be replicated by others seeking to validate their research. Despite the critical nature of this issue, NDE data is still being generated in research labs without appropriate documentation. By generating documentation in series with data, equal priority is given to both activities during the research process. One way to achieve this is to use a reactive documentation system (RDS). RDS prompts an operator to document the data as it is generated rather than relying on the operator to decide when and what to document. This paper discusses how such a system can be implemented in a dynamic environment made up of in-house and third party NDE data acquisition systems without creating additional burden on the operator. The reactive documentation approach presented here is agnostic enough that the principles can be applied to any operator controlled, computer based, data acquisition system.

  1. Initial Study

    DEFF Research Database (Denmark)

    Torp, Kristian

    2009-01-01

    increased. In the initial study presented here, the time it takes to pass an intersection is studied in details. Two major signal-controlled four-way intersections in the center of the city Aalborg are studied in details to estimate the congestion levels in these intersections, based on the time it takes...

  2. A study on integrity of LMFBR secondary cooling system to hypothetical tube failure propagation in the steam generator

    International Nuclear Information System (INIS)

    Yoshihisa Shindo; Kazuo Haga

    2005-01-01

    -LT code also developed in ANL. In this preliminary work event trees have been prepared to make clear the scenario from the initial small-scale leak to the severest large-scale leak due to the tube failure propagation in SG. The probability of failures of leak detectors, nickel membrane-type hydrogen detectors in sodium and pressure gauges that observe the cover gas pressure of SG (EV: evaporator and SH: superheater), is considered in the event trees. On the other hand, rupture disks in SH and EV were assumed to have the normal function in leak detection and reaction products release. In some cases, water/steam blow valves to mitigate leak propagation were assumed hypothetically to fail after the plant trip, and the water and steam remained in SG are not released. A relation between the maximum leak rate resulting from the tube failure propagation and the probability of its occurrence was obtained tentatively from these considerations. Then, the effect of pressure generated by the sodium-water reaction was evaluated to the structural integrity of the secondary cooling system components. (authors)

  3. Analysis of reactivity transient for the DIDO type research reactors using RELAP5

    International Nuclear Information System (INIS)

    Adorni, M.; Bousbia-Salah, A.; D'Auria, F.; Nabbi, R.

    2005-01-01

    Recent availability of high performance computers and computational methods together with the continuing increase in operational experience imposes revising some operational constrains and conservative safety margins. The application of Best-Estimate (BE) method constitutes a real necessity in the safety and design analysis and allows getting more realistic simulation of the processes taking place during the steady state operation and transients. In comparison to the conservative approaches, the application of Best-Estimate methods results in the mitigation of the constraining limits in design and operation. This paper presents the results of the application of the RELAP5/Mod3.3 system thermal-hydraulic code to the German FRJ-2 research reactor for a reactivity transient, which has been analyzed in the past using the verified system code CATHENA [1], [2], [3]. The work mainly aims checking the capability of RELAP5 [4] for research reactor transient analysis by the comparison of the results of the two codes and including modeling basis and analytical approaches. According to the existing references RELAP5 applications are concentrated on the transient analysis of nuclear power systems. The considered case consists of a simulation related to a hypothetical fast reactivity transient, which is assumed to be caused by the failure of one shutdown arm. The case has been chosen due to the importance of the models for the precise description of the complex phenomenon of subcooled boiling and two phase flow taking place during the transient. For this purpose, the fuel element assembly was modeled in detail according to design data. The primary circuit was included in the whole model in order to consider the interaction with individual fuel elements with core. In general the results of the two codes are in agreement and comparable during the initial phase of the transient. After reaching the flow regime with fully developed nucleate boiling and two phase flow RELAP5 exhibits

  4. Measurement of xenon reactivity in the reactor of the nuclear ship 'MUTSU'

    International Nuclear Information System (INIS)

    Itagaki, Masafumi; Miyoshi, Yoshinori; Gakuhari, Kazuhiko; Okada, Noboru.

    1993-01-01

    This report deals with the measurement of reactivity changes caused by the increase and decrease of xenon concentration in the reactor core of the nuclear ship 'MUTSU' after a change from long-term operation at 70 % to zero power. The change in xenon reactivity was compensated by control-rod movements and the compensated reactivity was measured using a digital reactivity meter. The xenon override peak was recognized five and half hours after the start of power reduction. The equilibrium and peak reactivities of xenon were estimated by reading the initial and peak values of a theoretical curve which was fitted to the measured variation in xenon reactivity. The xenon reactivity results obtained by the present method can be considered to be accurate since no control-rod worth data were used and the measured quantity was the reactivity itself. (author)

  5. [Reactive collisions of high-temperature systems

    International Nuclear Information System (INIS)

    Graff, M.M.

    1990-01-01

    The object of this research is to study reactivity at superthermal collision energies using a fast neutral beam that is generated by photodetachment. Systems scheduled for initial study include basic oxygen-hydrogen reactions. Unfortunately, we can not yet report realization of this goal, but during this funding period we have made advances that are anticipated to lead to successful measurements during the next year. The parameters described below refer to the model system O + H 2 → OH + H. The basic design involves the collision of fast neutrals, created by photodetachment of the corresponding negative molecular ion, with a stable reactant gas in a collision cell. Products are detected by ionization and mass analysis. We are equipped to study rotational effects on reactivity by comparing results for rotational levels J = 0 and 1 of H 2 . Highlights during the funding period are given in this report

  6. RETRANS, Reactivity Transients in LWR

    International Nuclear Information System (INIS)

    Kamelander, G.

    1989-01-01

    1 - Description of program or function: RETRANS is appropriate to calculate power excursions in light water reactors initiated by reactivity insertions due to withdrawal of control elements. As in the code TWIGL, the neutron physics model is based on the time-dependent two-group neutron diffusion equations. The equation of state of the coolant is approximated by a table built into the code. RETRANS solves the heat conduction equation and calculates the heat transfer coefficient for representative fuel rods at each time-step. 2 - Method of solution: The time-dependent neutron diffusion equations are modified by an exponential transformation and solved by means of a finite difference method. There is an option accelerating the inner iterations of the difference scheme by a coarse-mesh re-balancing method. The heat balance equations of the thermo- hydraulic model are discretized and converted into a tri-diagonal system of linear equations which is solved recursively. 3 - Restrictions on the complexity of the problem: r-z-geometry, one- phase-flow

  7. Reactive Power from Distributed Energy

    Energy Technology Data Exchange (ETDEWEB)

    Kueck, John; Kirby, Brendan; Rizy, Tom; Li, Fangxing; Fall, Ndeye

    2006-12-15

    Distributed energy is an attractive option for solving reactive power and distribution system voltage problems because of its proximity to load. But the cost of retrofitting DE devices to absorb or produce reactive power needs to be reduced. There also needs to be a market mechanism in place for ISOs, RTOs, and transmission operators to procure reactive power from the customer side of the meter where DE usually resides. (author)

  8. Reactive Power from Distributed Energy

    International Nuclear Information System (INIS)

    Kueck, John; Kirby, Brendan; Rizy, Tom; Li, Fangxing; Fall, Ndeye

    2006-01-01

    Distributed energy is an attractive option for solving reactive power and distribution system voltage problems because of its proximity to load. But the cost of retrofitting DE devices to absorb or produce reactive power needs to be reduced. There also needs to be a market mechanism in place for ISOs, RTOs, and transmission operators to procure reactive power from the customer side of the meter where DE usually resides. (author)

  9. Reactive programming in eventsourcing systems

    OpenAIRE

    Kučinskas, Žilvinas

    2017-01-01

    Eventsourcing describes current state as series of events that occurred in a system. Events hold all information that is needed to recreate current state. This method allows to achieve high volume of transactions, and enables efficient replication. Whereas reactive programming lets implement reactive systems in declarative style, decomposing logic into smaller, easier to understand components. Thesis aims to create reactive programming program interface, incorporating both principles. Applyin...

  10. Reactive Programming in Standard ML

    OpenAIRE

    Pucella, Riccardo

    2004-01-01

    Reactive systems are systems that maintain an ongoing interaction with their environment, activated by receiving input events from the environment and producing output events in response. Modern programming languages designed to program such systems use a paradigm based on the notions of instants and activations. We describe a library for Standard ML that provides basic primitives for programming reactive systems. The library is a low-level system upon which more sophisticated reactive behavi...

  11. Positive void reactivity

    International Nuclear Information System (INIS)

    Diamond, D.J.

    1992-09-01

    This report is a review of some of the important aspects of the analysis of large loss-of-coolant accidents (LOCAs). One important aspect is the calculation of positive void reactivity. To study this subject the lattice physics codes used for void worth calculations and the coupled neutronic and thermal-hydraulic codes used for the transient analysis are reviewed. Also reviewed are the measurements used to help validate the codes. The application of these codes to large LOCAs is studied with attention focused on the uncertainty factor for the void worth used to bias the results. Another aspect of the subject dealt with in the report is the acceptance criteria that are applied. This includes the criterion for peak fuel enthalpy and the question of whether prompt criticality should also be a criterion. To study the former, fuel behavior measurements and calculations are reviewed. (Author) (49 refs., 2 figs., tab.)

  12. Pembrolizumab reactivates pulmonary granulomatosis

    Directory of Open Access Journals (Sweden)

    Majdi Al-dliw

    2017-01-01

    Full Text Available Sarcoid like reaction is a well-known entity that occurs as a consequence to several malignancies or their therapies. Immunotherapy has gained a lot of interest in the past few years and has recently gained approval as first line therapy in multiple advanced stage malignancies. Pneumonitis has been described as complication of such therapy. Granulomatous inflammation has been only rarely reported subsequent to immunotherapy. We describe a case of granulomatous inflammation reactivation affecting the lungs in a patient previously exposed to Pembrolizumab and have evidence of a distant granulomatous infection. We discuss potential mechanisms of the inflammation and assert the importance of immunosuppression in controlling the dis-inhibited immune system.

  13. Reactive Oxygen Species

    DEFF Research Database (Denmark)

    Franchina, Davide G.; Dostert, Catherine; Brenner, Dirk

    2018-01-01

    T cells are a central component of defenses against pathogens and tumors. Their effector functions are sustained by specific metabolic changes that occur upon activation, and these have been the focus of renewed interest. Energy production inevitably generates unwanted products, namely reactive...... and transcription factors, influencing the outcome of the T cell response. We discuss here how ROS can directly fine-tune metabolism and effector functions of T cells....... oxygen species (ROS), which have long been known to trigger cell death. However, there is now evidence that ROS also act as intracellular signaling molecules both in steady-state and upon antigen recognition. The levels and localization of ROS contribute to the redox modeling of effector proteins...

  14. Weigle Reactivation in Acinetobacter Calcoaceticus

    DEFF Research Database (Denmark)

    Berenstein, Dvora

    1982-01-01

    phage and host survivals of about 5 times 10-6 and 1 times 10-1, respectively. Intracellular development of W-reactivated P78 was followed by one-step growth experiments. Conditions which allowed maximal W-reactivation also extended the period of phage production and yielded a somewhat reduced burst......Weigle (W)-reactivation was demonstrated in Acinetobacter calcoaceticus for the UV-irra-diated lysogenic phage P78. The reactivation factor (survival of irradiated phage on irradiated bacteria/ survival on unirradiated bacteria) reached a maximum value of 20. This was obtained at UV-doses giving...

  15. Calculation of individual and population doses on Danish territory resulting from hypothetical core-melt accidents at the Barsebaeck reactor

    International Nuclear Information System (INIS)

    1977-01-01

    Individual and population doses within Danish territory are calculated from hypothetical, severe core-melt accidents at the Swedish nuclear plant at Barsebaeck. The fission product inventory of the Barsebaeck reactor is calculated. The release fractions for the accidents are taken from WASH-1400. Based on parametric studies, doses are calculated for very unfavourable, but not incredible weather conditions. The probability of such conditions in combination with wind direction towards Danish territory is estimated. Doses to bone marrow, lungs, GI-tract and thyroid are calculated based on dose models developed at Risoe. These doses are found to be consistent with doses calculated with the models used in WASH-1400. (author)

  16. The retardation effect of structural graphite on the release of fission products in case of hypothetical accidents of HTRs

    International Nuclear Information System (INIS)

    Iniotakis, N.; Decken, C.B. von der

    1982-01-01

    In case of a hypothetical core heat up accident of an HTR the structural graphite of the reactor causes under certain circumstances a very important retardation of the release of fission products into the containment building of the plant. A model is presented which describes the transport phenomena in the graphite structure extensively taking into account specially the macro-structure of the graphite. It is shown by parameter variations under which conditions one can expect a large retardation effect and quantitative values of this retardation, which can be very important, are given. (author)

  17. Numerical investigation on the effect of reactivity gradient in an RCCI engine fueled with gasoline and diesel

    International Nuclear Information System (INIS)

    Li, J.; Yang, W.M.; An, H.; Zhou, D.Z.; Yu, W.B.; Wang, J.X.; Li, L.

    2015-01-01

    Highlights: • A chemical reaction mechanism is newly developed for dual fuel combustion. • The developed chemical kinetics is coupled with KIVA4 to model the combustion. • The role of reactivity gradient in RCCI combustion is investigated. • The RCCI (dual fuel mode) combustion is compared with blend fuel mode. - Abstract: The reactivity controlled compression ignition (RCCI), which belongs to dual fuel mode (DFM) combustion has been considered as a promising way to achieve high fuel conversion efficiency and low emissions. By this strategy, a fuel reactivity gradient is formed in the combustion chamber which offers the probability of controlling combustion phasing. In this study, the role of fuel reactivity gradient was examined numerically by comparing a DFM (i.e., RCCI) combustion with other hypothetical cases under one specific load condition. Firstly, a chemical reaction mechanism was developed aiming at a modelling study on dual fuel and blend fuel combustion in internal combustion (IC) engines fueled by gasoline/diesel and gasoline/biodiesel. Ignition delays were validated for 100% diesel, 100% gasoline and 100% biodiesel under 102 conditions in total. Subsequently, the validated reaction mechanism which consists of 107 species and 425 reactions was implemented in coupled KIVA4-CHEMKIN code. Three dimensional validations were further conducted under 3 conditions including pure diesel combustion, and gasoline/diesel DFM combustion with both single and double injection strategies in the engine. To investigate the fuel reactivity gradient, the gasoline/diesel DFM combustion with single injection was compared with other three hypothetical cases, one of which was DFM without fuel reactivity gradient, two were the blend fuel mode but with different start of injection (SOI) timings. The results showed that the fuel reactivity gradient could retard the ignition timing, reduce heat release rate, and ease peak pressure rise rate. In addition, low levels of NO

  18. Potential consequences in Norway after a hypothetical accident at Leningrad nuclear power plant. Potential release, fallout and predicted impacts on the environment

    International Nuclear Information System (INIS)

    Nalbandyan, A.; Ytre-Eide, M.A.; Thoerring, H.; Liland, A.; Bartnicki, J.; Balonov, M.

    2012-06-01

    The report describes different hypothetical accident scenarios at the Leningrad nuclear power plant for both RBMK and VVER-1200 reactors. The estimated release is combined with different meteorological scenarios to predict possible fallout of radioactive substances in Norway. For a hypothetical catastrophic accident at an RBMK reactor combined with a meteorological worst case scenario, the consequences in Norway could be considerable. Foodstuffs in many regions would be contaminated above the food intervention levels for radioactive cesium in Norway. (Author)

  19. Potential consequences in Norway after a hypothetical accident at Leningrad nuclear power plant. Potential release, fallout and predicted impacts on the environment

    Energy Technology Data Exchange (ETDEWEB)

    Nalbandyan, A.; Ytre-Eide, M.A.; Thoerring, H.; Liland, A.; Bartnicki, J.; Balonov, M.

    2012-06-15

    The report describes different hypothetical accident scenarios at the Leningrad nuclear power plant for both RBMK and VVER-1200 reactors. The estimated release is combined with different meteorological scenarios to predict possible fallout of radioactive substances in Norway. For a hypothetical catastrophic accident at an RBMK reactor combined with a meteorological worst case scenario, the consequences in Norway could be considerable. Foodstuffs in many regions would be contaminated above the food intervention levels for radioactive cesium in Norway. (Author)

  20. Regarding KUR Reactivity Measurement System

    International Nuclear Information System (INIS)

    Nakamori, Akira; Hasegawa, Kei; Tsuchiyama, Tatsuo; Yamamoto, Toshihiro; Okumura, Ryo; Sano, Tadafumi

    2012-01-01

    This article reported: (1) the outline of the reactivity measurement system of Kyoto University Research Reactor (KUR), (2) the calibration data of control rod, (3) the problems and the countermeasures for range switching of linear output meter. For the laptop PC for the reactivity measurement system, there are four input signals: (1) linear output meter, (2) logarithmic output meter, (3) core temperature gauge, and (4) control rod position. The hardware of reactivity measurement system is controlled with Labview installed on the laptop. Output, reactivity, reactor period, and the change in reactivity due to temperature effect or Xenon effect are internally calculated and displayed in real-time with Labview based on the four signals above. Calculation results are recorded in the form of a spreadsheet. At KUR, the reactor core arrangement was changed, so the control rod was re-calibrated. At this time, calculated and experimental values of reactivity based on the reactivity measurement system were compared, and it was confirmed that the reactivity calculation by Labview was accurate. The range switching of linear output meter in the nuclear instrumentation should automatically change within the laptop, however sometimes this did not function properly in the early stage. It was speculated that undefined percent values during the transition of percent value were included in the calculation and caused calculation errors. The range switching started working properly after fixing this issue. (S.K.)

  1. Reactive agents and perceptual ambiguity

    NARCIS (Netherlands)

    Dartel, M. van; Sprinkhuizen-Kuyper, I.G.; Postma, E.O.; Herik, H.J. van den

    2005-01-01

    Reactive agents are generally believed to be incapable of coping with perceptual ambiguity (i.e., identical sensory states that require different responses). However, a recent finding suggests that reactive agents can cope with perceptual ambiguity in a simple model (Nolfi, 2002). This paper

  2. Allergens involved in the cross-reactivity of Aedes aegypti with other arthropods.

    Science.gov (United States)

    Cantillo, Jose Fernando; Puerta, Leonardo; Lafosse-Marin, Sylvie; Subiza, Jose Luis; Caraballo, Luis; Fernandez-Caldas, Enrique

    2017-06-01

    Cross-reactivity between Aedes aegypti and mites, cockroaches, and shrimp has been previously suggested, but the involved molecular components have not been fully described. To evaluate the cross-reactivity between A aegypti and other arthropods. Thirty-four serum samples from patients with asthma and/or allergic rhinitis were selected, and specific IgE to A aegypti, Dermatophagoides pteronyssinus, Dermatophagoides farinae, Blomia tropicalis, Periplaneta americana. and Litopenaeus vannamei was measured by enzyme-linked immunosorbent assay. Cross-reactivity was investigated using pooled serum samples from allergic patients, allergenic extracts, and the recombinant tropomyosins (Aed a 10.0201, Der p 10, Blo t 10, Lit v 1, and Per a 7). Four IgE reactive bands were further characterized by matrix-assisted laser desorption/ionization tandem time of flight. Frequency of positive IgE reactivity was 82.35% to at least one mite species, 64.7% to A aegypti, 29.4% to P americana, and 23.5% to L vannamei. The highest IgE cross-reactivity was seen between A aegypti and D pteronyssinus (96.6%) followed by L vannamei (95.4%), B tropicalis (84.4%), and P americana (75.4%). Recombinant tropomyosins from mites, cockroach, or shrimp inhibited the IgE reactivity to the mosquito at a lower extent than the extracts from these arthropods. Several bands of A aegypti cross-reacted with arthropod extracts, and 4 of them were identified as odorant binding protein, mitochondrial cytochrome C, peptidyl-prolyl cis-trans isomerase, and protein with hypothetical magnesium ion binding function. We identified 4 novel cross-reactive allergens in A aegypti allergenic extract. These molecules could influence the manifestation of allergy to environmental allergens in the tropics. Copyright © 2017 American College of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

  3. A hypothetical role for vitamin K2 in the endocrine and exocrine aspects of dental caries.

    Science.gov (United States)

    Southward, Ken

    2015-03-01

    The growing interest in oral/systemic links demand new paradigms to understand disease processes. New opportunities for dental research, particularly in the fields of neuroscience and endocrinology will emerge. The role of the hypothalamus portion of the brain cannot be underestimated. Under the influence of nutrition, it plays a significant role in the systemic model of dental caries. Currently, the traditional theory of dental caries considers only the oral environment and does not recognize any significant role for the brain. The healthy tooth, however, has a centrifugal fluid flow to nourish and cleanse it. This is moderated by the hypothalamus/parotid axis which signals the endocrine portion of the parotid glands. High sugar intake creates an increase in reactive oxygen species and oxidative stress in the hypothalamus. When this signaling mechanism halts or reverses the dentinal fluid flow, it renders the tooth vulnerable to oral bacteria, which can now attach to the tooth's surface. Acid produced by oral bacteria such as Strep Mutans and lactobacillus can now de-mineralize the enamel and irritate the dentin. The acid attack stimulates an inflammatory response which results in dentin breakdown from the body's own matrix metalloproteinases. Vitamin K2 (K2) has been shown to have an antioxidant potential in the brain and may prove to be a potent way to preserve the endocrine controlled centrifugal dentinal fluid flow. Stress, including oxidative stress, magnifies the body's inflammatory response. Sugar can not only increase oral bacterial acid production but it can concurrently reduce the tooth's defenses through endocrine signaling. Saliva production is the exocrine function of the salivary glands. The buffering capacity of saliva is critical to neutralizing the oral environment. This minimizes the de-mineralization of enamel and enhances its re-mineralization. K2, such as that found in fermented cheese, improves salivary buffering through its influence on

  4. Modeling of fast reactor cladding failure for hypothetical accident transient analysis

    International Nuclear Information System (INIS)

    Kramer, J.M.; DiMelfi, R.J.; Hughes, T.H.; Deitrich, L.W.

    1979-01-01

    An analysis is made of burst experiments performed on neutron irradiated cladding tubes. This is done by employing a generalized Voce equation to describe the mechanical deformation of type 316 stainless steel, combined with an empirical creep crack growth law, each modified to account for the effects of irradiation matrix hardening, and irradiation induced grain boundary embrittlement, respectively. The results of this analysis indicate that for large initial hoop stress, failure occurs at relatively low temperature and is controlled by the onset of plastic instability. The increase in failure temperature of irradiated material, in this low temperature region, is due to irradiation strengthening. Failure in the case of relatively small initial hoop stress occurs at high temperature where the Voce equation reduces to a power law creep formula. The ductility of irradiated material, in this high temperature region, is adequately described through the use of an empirical intergranular crack growth law used in conjunction with the creep law. The effect of neutron irradiation is to reduce the activation energy for crack propagation from the value for creep to some lower value correlated to independent Dorn rupture parameter measurements. The result is a predicted reduced ductility which translates into a reduction in failure temperature at a given hoop stress value for irradiated material. (orig.)

  5. An in silico Approach for Structural and Functional Annotation of Salmonella enterica serovar typhimurium Hypothetical Protein R_27

    Directory of Open Access Journals (Sweden)

    Arif Khan

    2016-03-01

    Full Text Available Typhoid fever is a major cause of illness in most developing countries, including Bangladesh. In quest of new potential drug against Typhoid fever, the current study was designed to elucidate structural and functional details of S. typhi hypothetical protein (HP R_27. HP R_27 has the primary amino acid sequences available only. The structural annotation was determined by ProtParam, SOPMA, and CELLO. The three-dimensional (3D structure of HP R_27 predicted through homology modeling by using Phyre2. The 3D structure then refined and verified by ModRefiner, PROCHECK, ERRAT, QMEAN. The functional annotation was also performed by InterProScan, SMART, Pfam, NCBI-CDD and found Phospholipase D-like and DNA repair activity. Multiple sequence alignment also supported the existence of PLD-like domain and DNA repair protein domain in the selected hypothetical protein sequences. Finally, the cavity of drug binding was also identified to assist further molecular docking study and potent inhibitor identification. This in silico approach can be further utilized in molecular drug design for other clinically significant pathogens.

  6. Cloning, purification and preliminary crystallographic analysis of a conserved hypothetical protein, SA0961 (YlaN), from Staphylococcus aureus

    International Nuclear Information System (INIS)

    Xu, Ling; Sedelnikova, Svetlana E.; Baker, Patrick J.; Rice, David W.

    2006-01-01

    SA0961 is an unknown hypothetical protein from Staphylococcus aureus that can be identified in the Firmicutes division of Gram-positive bacteria. SA0961 was cloned and the protein was overexpressed in Escherichia coli, purified and subsequently crystallized. SA0961 is an unknown hypothetical protein from Staphylococcus aureus that can be identified in the Firmicutes division of Gram-positive bacteria. The gene for the homologue of SA0961 in Bacillus subtilis, ylaN, has been shown to be essential for cell survival, thus identifying the protein encoded by this gene as a potential target for the development of novel antibiotics. SA0961 was cloned and the protein was overexpressed in Escherichia coli, purified and subsequently crystallized. Crystals of selenomethionine-labelled SA0961 diffract to beyond 2.4 Å resolution and belong to the monoclinic space group P2 1 , with unit-cell parameters a = 31.5, b = 42.7, c = 62.7 Å, β = 92.4° and two molecules in the asymmetric unit. A full structure determination is under way to provide insights into the function of this protein

  7. Cloning, purification and preliminary crystallographic analysis of a conserved hypothetical protein, SA0961 (YlaN), from Staphylococcus aureus

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Ling; Sedelnikova, Svetlana E.; Baker, Patrick J.; Rice, David W., E-mail: d.rice@sheffield.ac.uk [Krebs Institute for Biomolecular Research, Department of Molecular Biology and Biotechnology, The University of Sheffield, Sheffield S10 2TN (United Kingdom)

    2006-08-01

    SA0961 is an unknown hypothetical protein from Staphylococcus aureus that can be identified in the Firmicutes division of Gram-positive bacteria. SA0961 was cloned and the protein was overexpressed in Escherichia coli, purified and subsequently crystallized. SA0961 is an unknown hypothetical protein from Staphylococcus aureus that can be identified in the Firmicutes division of Gram-positive bacteria. The gene for the homologue of SA0961 in Bacillus subtilis, ylaN, has been shown to be essential for cell survival, thus identifying the protein encoded by this gene as a potential target for the development of novel antibiotics. SA0961 was cloned and the protein was overexpressed in Escherichia coli, purified and subsequently crystallized. Crystals of selenomethionine-labelled SA0961 diffract to beyond 2.4 Å resolution and belong to the monoclinic space group P2{sub 1}, with unit-cell parameters a = 31.5, b = 42.7, c = 62.7 Å, β = 92.4° and two molecules in the asymmetric unit. A full structure determination is under way to provide insights into the function of this protein.

  8. Assessment in marine environment for a hypothetic nuclear accident based on the database of tidal harmonic constants

    International Nuclear Information System (INIS)

    Min, Byung-Il; Periáñez, Raúl; Park, Kihyun; Kim, In-Gyu; Suh, Kyung-Suk

    2014-01-01

    Highlights: • An oceanic dispersion assessment system has been developed. • The developed system is based on a database of tidal harmonic constants. • It used to evaluate pollutant behavior for the hypothetical nuclear accident. • It can predict the pollutant distributions with real-time in the ocean. - Abstract: The eleven nuclear power plants in operation, under construction and a well-planned plant in the east coast of China generally use seawater for reactor cooling. In this study, an oceanic dispersion assessment system based on a database of tidal harmonic constants is developed. This system can calculate the tidal current without a large computational cost, and it is possible to calculate real-time predictions of pollutant dispersions in the ocean. Calculated amplitudes and phases have maximum errors of 10% and 20% with observations, respectively. A number of hypothetical simulations were performed according to varying of the release starting time and duration of pollutant for the six nuclear sites in China. The developed system requires a computational time of one hour for one month of real-time forecasting in Linux OS. Thus, it can use to evaluate rapidly the dispersion characteristics of the pollutants released into the sea from a nuclear accident

  9. Framing of outcome and probability of recurrence: breast cancer patients' choice of adjuvant chemotherapy (ACT) in hypothetical patient scenarios.

    Science.gov (United States)

    Zimmermann, C; Baldo, C; Molino, A

    2000-03-01

    To examine the effects of framing of outcome and probabilities of cancer occurrence on the treatment preference which breast cancer patients indicate for hypothetical patient scenarios. A modified version of the Decision Board Instrument (Levine et al. 1992) was administered to 35 breast cancer patients with past ACT experience. Patients expressed their choice regarding ACT for six scenarios which were characterized by either negative or positive framing of outcome and by one of the three levels of probability of recurrence (high, medium, low). The framing had no influence on ACT choices over all three probability levels. The majority chose ACT for high and medium risk and one third switched from ACT to No ACT in the low-risk condition. This switch was statistically significant. Hypothetical treatment decisions against ACT occur only when the probability of recurrence is low and the benefit of ACT is small. This finding for patients with past experience of ACT is similar to those reported for other oncological patient groups still in treatment.

  10. Comprehensive and consistent interpretation of local fault experiments and application to hypothetical local overpower accident in Monju

    International Nuclear Information System (INIS)

    Fukano, Yoshitaka

    2013-01-01

    Experimental studies on local fault (LF) accidents in fast breeder reactors have been performed in many countries because LFs have been historically considered as one of the possible causes of severe accidents. Comprehensive and consistent interpretations of in-pile and out-of-pile experiments related to LF were arrived at in this study based on state-of-the-art review and data analysis techniques. Safety margins for a hypothetical local overpower accident, which was evaluated as a LF accident in the licensing document of the construction permit for a prototype fast breeder reactor called Monju, were also studied. Based on comprehensive interpretations of the latest experimental database, including those performed after the permission of Monju construction, it was clarified that the evaluation of the hypothetical local overpower accident in the Monju licensing was sufficiently conservative. Furthermore, it incorporated adequate safety margins in terms of failure thresholds of the fuel pin, molten fuel ejection, fuel sweep-out behavior after molten fuel ejection, and pin-to-pin failure propagation. Moreover, these comprehensive interpretations are valid and applicable to the safety evaluation of LF accidents of other fast breeder reactors with various fuel and core designs. (author)

  11. Using surveillance data to simulate the impact of a hypothetical pre-entry tuberculosis screening programme in Japan.

    Science.gov (United States)

    Kawatsu, L; Uchimura, K; Izumi, K; Ohkado, A; Kato, S

    2018-05-01

    Despite a growing burden of foreign-born tuberculosis (TB) patients, Japan does not currently practise pre-entry tuberculosis (TB) screening among foreign-born entrants. To evaluate the impact of a hypothetical pre-entry TB screening programme among new foreign-born entrants into Japan. Using publicly available sources, we estimated 1) the number of prevalent TB cases, defined as bacteriologically or clinically confirmed cases among new foreign-born entrants into Japan in 2015, and 2) the yield from a hypothetical pre-entry TB screening programme under three scenarios: Scenario A, in which screening would be required of all applicants intending to stay for 3 months; Scenario B, screening among applicants for visas for settlement purposes; and Scenario C, screening among student and technical intern visa applicants. The numbers of prevalent TB cases under Scenarios A, B and C were respectively 492, 54 and 248 out of a total of 328 791, 21 554 and 182 879 applicants, respectively 276, 29 and 137 of whom would be detected via the pre-entry screening programme, giving an yield of respectively 83.9, 134.5 and 74.9 per 100 000 screened under each scenario. The yield was the highest under Scenario B; however, the impact was greatest under Scenario A, in that it detected the greatest number of patients and thus contributed the most in reducing the burden of foreign-born TB cases in Japan.

  12. Personality and Behavior in Social Dilemmas: Testing the Situational Strength Hypothesis and the Role of Hypothetical Versus Real Incentives.

    Science.gov (United States)

    Lozano, José H

    2016-02-01

    Previous research aimed at testing the situational strength hypothesis suffers from serious limitations regarding the conceptualization of strength. In order to overcome these limitations, the present study attempts to test the situational strength hypothesis based on the operationalization of strength as reinforcement contingencies. One dispositional factor of proven effect on cooperative behavior, social value orientation (SVO), was used as a predictor of behavior in four social dilemmas with varying degree of situational strength. The moderating role of incentive condition (hypothetical vs. real) on the relationship between SVO and behavior was also tested. One hundred undergraduates were presented with the four social dilemmas and the Social Value Orientation Scale. One-half of the sample played the social dilemmas using real incentives, whereas the other half used hypothetical incentives. Results supported the situational strength hypothesis in that no behavioral variability and no effect of SVO on behavior were found in the strongest situation. However, situational strength did not moderate the effect of SVO on behavior in situations where behavior showed variability. No moderating effect was found for incentive condition either. The implications of these results for personality theory and assessment are discussed. © 2014 Wiley Periodicals, Inc.

  13. Questioning the differences between general public vs. patient based preferences towards EQ-5D-5L defined hypothetical health states.

    Science.gov (United States)

    Ogorevc, Marko; Murovec, Nika; Fernandez, Natacha Bolanos; Rupel, Valentina Prevolnik

    2017-03-28

    The purpose of this article is to explore whether any differences exist between the general population and patient based preferences towards EQ-5D-5L defined hypothetical health states. The article discusses the role of adaptation and self-interest in valuing health states and it also contributes rigorous empirical evidence to the scientific debate on the differences between the patient and general population preferences towards hypothetical health states. Patient preferences were elicited in 2015 with the EQ-5D-5L questionnaire using time trade-off and discrete choice experiment design and compared to the Spanish general population preferences, which were elicited using identical methods. Patients were chosen on a voluntary basis according to their willingness to participate in the survey. They were recruited from patient organisations and a hospital in Madrid, Spain. 282 metastatic breast cancer patients and 333 rheumatoid arthritis patients were included in the sample. The analysis revealed differences in preferences between the general population and patient groups. Based on the results of our analysis, it is suggested that the differences in preferences stem from patients being more able to accurately imagine "non-tangible" dimensions of health states (anxiety or depression, and pain or discomfort) than the general population with less experience in various health states. However, this does not mean that general public values should not be reflected in utilities derived for coverage decision making. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. PROCEEDINGS: MULTIPOLLUTANT SORBENT REACTIVITY ...

    Science.gov (United States)

    The report is a compilation of technical papers and visual aids presented by representatives of industry, academia, and government agencies at a workshop on multipollutant sorbent reactivity that was held at EPA's Environmental Research Center in Research Triangle Park, NC, on July 19-20, 1994. There were 16 technical presentations in three sessions, and a panel discussion between six research experts. The workshop was a forum for the exchange of ideas and information on the use of sorbents to control air emissions of acid gases (sulfur dioxide, nitrogen oxides, and hydrogen chloride); mercury and dioxins; and toxic metals, primarily from fossil fuel combustion. A secondary purpose for conducting the workshop was to help guide EPA's research planning activities. A general theme of the workshop was that a strategy of controlling many pollutants with a single system rather than systems to control individual pollutants should be a research goal. Some research needs cited were: hazardous air pollutant removal by flue gas desulfurization systems, dioxin formation and control, mercury control, waste minimization, impact of ash recycling on metals partitioning, impact of urea and sorbents on other pollutants, high temperature filtration, impact of coal cleaning on metals partitioning, and modeling dispersion of sorbents in flue gas. information

  15. Reactivation with productivity

    International Nuclear Information System (INIS)

    Garcia, Carlos Hernando

    2002-01-01

    A market to five years that it will move near $63.000 millions, starting from the production of 254.000 reserves that Ecopetrol requires for its maintenance and operation, it was projected with base in the offer study and it demands that they carried out the universities Javeriana and Industrial of Santander for the Colombian Company of Petroleum around the metal mechanic sector. In accordance with the figures of the report, Ecopetrol, like one of the state entities selected by the national government to design pilot programs, guided to reactivate the Colombian industry; it is projecting a good perspective for the Colombian economy and the invigoration of the national productive sector. In practical terms, the report points out that Ecopetrol, in its different operative centers, will require in next five years the quantity of had restored before mentioned in the lines of mechanical stamps, centrifugal bombs, inter chambers of heat, compressors and valves of security; pieces that are elaborated by international makers in 99%. To produce them nationally would represent to the company an economy of 52% of the total value of the purchases in next five years and a reduction of time of delivery of 17 weeks to one week

  16. Assessment of solid reactive mixtures for the development of biological permeable reactive barriers

    International Nuclear Information System (INIS)

    Pagnanelli, Francesca; Viggi, Carolina Cruz; Mainelli, Sara; Toro, Luigi

    2009-01-01

    Solid reactive mixtures were tested as filling material for the development of biological permeable reactive barriers for the treatment of heavy metals contaminated waters. Mixture selection was performed by taking into account the different mechanisms operating in sulphate and cadmium removal with particular attention to bioprecipitation and sorption onto the organic matrices in the mixtures. Suspensions of eight reactive mixtures were tested for sulphate removal (initial concentration 3 g L -1 ). Each mixture was made up of four main functional components: a mix of organic sources for bacterial growth, a neutralizing agent, a porous medium and zero-valent iron. The best mixture among the tested ones (M8: 6% leaves, 9% compost, 3% zero-valent iron, 30% silica sand, 30% perlite, 22% limestone) presented optimal conditions for SRB growth (pH 7.8 ± 0.1; E h = -410 ± 5 mV) and 83% sulphate removal in 22 days (25% due to bioreduction, 32% due to sorption onto compost and 20% onto leaves). M8 mixture allowed the complete abatement of cadmium with a significant contribution of sorption over bioprecipitation (6% Cd removal due to SRB activity). Sorption properties, characterised by potentiometric titrations and related modelling, were mainly due to carboxylic sites of organic components used in reactive mixtures.

  17. Antigen modulation of the immune response. III. Evaluation of the hypothetical short-lived memory cell

    International Nuclear Information System (INIS)

    Feldbush, T.L.; Lande, I.; Bryan, B.; O'Neill, E.

    1974-01-01

    The putative short-lived memory cells, whose existence has been suggested by the results of secondary adoptive transfer experiments, were investigated. On the basis of the following evidences we have concluded that the short-lived memory cell is probably an artifact of the adoptive transfer technique: when immune thoracic duct lymphocytes, known to consist predominantly of long-lived memory cells, were transferred to irradiated recipients and challenged at various times after transfer, approximately 80 to 90 percent of the initial response was absent by Day 14 challenge; preirradiating adoptive recipients with increasing dose of x-irradiation tended to lengthen the observed half life of memory cells; single or multiple treatments of immune donors with 0.3 mg Vinblastin before transfer resulted in neither a depression of the initial secondary response nor an alteration in the rate of decline of the memory potential; reconstitution of irradiated hosts with normal spleen cells one day before transfer of memory cells and challenge resulted in inhibition of the adoptive secondary response; and the transfer of memory cells to antigen free intermediate hosts, in which they were allowed to reside for one day or fourteen days before transfer to irradiated recipients, resulted in only a slight decline in their capacity to respond. We propose that the rapid decline of memory potential in adoptive recipients challenged at various times after transfer is due to modulating effects by the hosts as it recovers from irradiation. These effects may be the result of cell crowding or the loss of irradiation-produced stimulatory factors. The relevance of these findings to adoptive transfer systems in general and the secondary response of intact animals is discussed

  18. Melt Fragmentation Characteristics of Metal Fuel with Melt Injection Mass during Initiating Phase of SFR Severe Accidents

    Energy Technology Data Exchange (ETDEWEB)

    Heo, Hyo; Lee, Min Ho; Bang, In Cheol [Ulsan National Institute of Science and Technology, Ulsan (Korea, Republic of); Jerng, Dong Wook [Chung-Ang Univ., Seoul (Korea, Republic of)

    2016-05-15

    The PGSFR has adopted the metal fuel for its inherent safety under severe accident conditions. However, this fuel type is not demonstrated clearly yet under the such severe accident conditions. Additional experiments for examining these issues should be performed to support its licensing activities. Under initiating phase of hypothetic core disruptive accident (HCDA) conditions, the molten metal could be better dispersed and fragmented into the coolant channel than in the case of using oxide fuel. This safety strategy provides negative reactivity driven by a good dispersion of melt. If the coolant channel does not sufficient coolability, the severe recriticality would occur within the core region. Thus, it is important to examine the extent of melt fragmentation. The fragmentation behaviors of melt are closely related to a formation of debris shape. Once the debris shape is formed through the fragmentation process, its coolability is determined by the porosity or thermal conductivity of the melt. There were very limited studies for transient irradiation experiments of the metal fuel. These studies were performed by Transient Reactor Test Facility (TREAT) M series tests in U.S. The TREAT M series tests provided basic information of metal fuel performance under transient conditions. The effect of melt injection mass was evaluated in terms of the fragmentation behaviors of melt. These behaviors seemed to be similar between single-pin and multi-pins failure condition. However, the more melt was agglomerated in case of multi-pins failure.

  19. Phosphorus removal from UASB reactor effluent by reactive media filtration.

    Science.gov (United States)

    Rodríguez-Gómez, Raúl; Renman, Gunno

    2017-08-01

    The phosphorus (P) and BOD7 removal performance of an upflow packed bed reactor (PBR) filled with two reactive filter media was studied over 50 weeks. The lower one-fifth of the reactor was filled with calcium-silicate-hydrate (Sorbulite®) and the upper four-fifth with calcium-silicate (Polonite®). A laboratory-scale upflow anaerobic sludge bed reactor (UASB) delivered wastewater to the PBR. A model was developed to describe the gradient in P concentration change in the reactor, based on reaction kinetics. The reaction terms were assumed to follow the Langmuir isotherm, based on the results obtained in a batch test. First, a comparison was made between experimental and simulated results. The capability of the model to forecast P removal capacity was then tested for three hypothetical cases: (i) reactor filled with Sorbulite and Polonite, (ii) reactor filled with only Sorbulite, and (iii) reactor filled with only Polonite. Finally, a sensitivity analysis was performed for the main parameters in the model. The average removal of P and BOD7 from the UASB effluent was 98% and 90%, respectively. The starting pH of the dual-medium effluent was 12.2 and decreased gradually over time to 11.1. The simulation both overestimated and underestimated mean measured P removal but was within the range of maximum and minimum measured values. The hypothetical cases revealed that most P was removed by Polonite due to calcium phosphate precipitation. The removal capacity of the two filter materials and their layer height in the reactor were the most sensitive parameters in the simulation.

  20. Initial synthesis of area 13 239Pu data and other statistical analyses

    International Nuclear Information System (INIS)

    Gilbert, R.O.; Eberhardt, L.L.

    1976-02-01

    An initial effort is made here to synthesize the 239-240 Pu data currently available from Area 13 (Project 57). Plutonium concentrations for soil, vegetation, small vertebrates, and various tissues in beef cattle (grazed on the Pu contaminated vegetation) are plotted on a single graph for visual comparison. Hypothetical 239-240 Pu concentrations for lungs, skeletal bone, and kidney of a Standard Man assumed to live in and obtain most of his food from the area are also plotted. These hypothetical values were obtained using results from the plutonium transport and dose estimation model of Martin and Bloom (1975)

  1. Openness initiative

    International Nuclear Information System (INIS)

    Duncan, S.S.

    1995-01-01

    Although antinuclear campaigns seem to be effective, public communication and education efforts on low-level radioactive waste have mixed results. Attempts at public information programs on low-level radioactive waste still focus on influencing public opinion. A question then is: open-quotes Is it preferable to have a program focus on public education that will empower individuals to make informed decisions rather than trying to influence them in their decisions?close quotes To address this question, a case study with both quantitative and qualitative data will be used. The Ohio Low-Level Radioactive Waste Education Program has a goal to provide people with information they want/need to make their own decisions. The program initiated its efforts by conducting a statewide survey to determine information needed by people and where they turned for that information. This presentation reports data from the survey and then explores the program development process in which programs were designed and presented using the information. Pre and post data from the programs reveal attitude and knowledge shifts

  2. Openness initiative

    Energy Technology Data Exchange (ETDEWEB)

    Duncan, S.S. [Los Alamos National Lab., NM (United States)

    1995-12-31

    Although antinuclear campaigns seem to be effective, public communication and education efforts on low-level radioactive waste have mixed results. Attempts at public information programs on low-level radioactive waste still focus on influencing public opinion. A question then is: {open_quotes}Is it preferable to have a program focus on public education that will empower individuals to make informed decisions rather than trying to influence them in their decisions?{close_quotes} To address this question, a case study with both quantitative and qualitative data will be used. The Ohio Low-Level Radioactive Waste Education Program has a goal to provide people with information they want/need to make their own decisions. The program initiated its efforts by conducting a statewide survey to determine information needed by people and where they turned for that information. This presentation reports data from the survey and then explores the program development process in which programs were designed and presented using the information. Pre and post data from the programs reveal attitude and knowledge shifts.

  3. Initiative hard coal; Initiative Steinkohle

    Energy Technology Data Exchange (ETDEWEB)

    Leonhardt, J.

    2007-08-02

    In order to decrease the import dependence of hard coal in the European Union, the author has submitted suggestions to the director of conventional sources of energy (directorate general for energy and transport) of the European community, which found a positive resonance. These suggestions are summarized in an elaboration 'Initiative Hard Coal'. After clarifying the starting situation and defining the target the presupposition for a better use of hard coal deposits as raw material in the European Union are pointed out. On that basis concrete suggestions for measures are made. Apart from the conditions of the deposits it concerns thereby also new mining techniques and mining-economical developments, connected with tasks for the mining-machine industry. (orig.)

  4. Present art of reactivity determination

    International Nuclear Information System (INIS)

    Kaneko, Yoshihiko; Nakano, Masafumi; Matsuura, Shojiro

    1977-01-01

    Experimental techniques for reactivity determination of a reactor have been one of the long standing subjects in reactor physics. Recently, such a requirement was proposed by the reactor designers and operators that the values of reactivity should be measured more accurately. This is because importance is emphasized for the role of reactivity to the performance of reactor safety, economics and operability. Motivated by the requirement, some remarkable progresses are being made for the improvement of the experimental techniques. Then, the present review summarizes the research activities on this subject, identifies several reactor physics problems to be overcome, and makes mention of the future targets. (auth.)

  5. Hyper-reactive Malarial Splenomegaly: A Case Report and Review ...

    African Journals Online (AJOL)

    Hyper-reactive malarial splenomegaly is thought to represent a dysfunctional immune response to recurrent malaria infection. A 14 year old male child with hms, hypersplenism, ascites and peripheral lymphadenopathy is reported. There was initial poor response to proguanil aggravated by non compliance. He was started ...

  6. Processing of polymers using reactive solvents

    NARCIS (Netherlands)

    Lemstra, P.J.; Kurja, J.; Meijer, H.E.H.; Meijer, H.E.H.

    1997-01-01

    A review with many refs. on processing of polymers using reactive solvents including classification of synthetic polymers, guidelines for the selection of reactive solvents, basic aspects of processing, examples of intractable and tractable polymer/reactive solvent system

  7. Wind Tunnel Measurements of Turbulent Boundary Layer over Hypothetical Urban Roughness Elements

    Science.gov (United States)

    Ho, Y. K.; Liu, C. H.

    2012-04-01

    Urban morphology affects the near-ground atmospheric boundary layer that in turn modifies the wind flows and pollutant dispersion over urban areas. A number of numerical models (large-eddy simulation, LES and k-ɛ turbulence models) have been developed to elucidate the transport processes in and above urban street canyons. To complement the modelling results, we initiated a wind tunnel study to examine the influence of idealized urban roughness on the flow characteristics and pollutant dispersion mechanism over 2D idealized street canyons placed in cross flows. Hot-wire anemometry (HWA) was employed in this study to measure the flows over 2D street canyons in the wind tunnel in our university. Particular focus in the beginning stage was on the fabrication of hot-wire probes, data acquisition system, and signal processing technique. Employing the commonly adopted hot-wire universal function, we investigated the relationship in between and developed a scaling factor which could generalize the output of our hot-wire probes to the standardized one as each hot-wire probes has its unique behaviour. Preliminary experiments were performed to measure the wind flows over street canyons of unity aspect ratio. Vertical profiles of the ensemble average velocity and fluctuations at three different segments over the street canyons were collected. The results were then compared with our LES that show a good argument with each other. Additional experiments are undertaken to collect more data in order to formulate the pollutant dispersion mechanism of street canyons and urban areas.

  8. Reactive Collision Avoidance Algorithm

    Science.gov (United States)

    Scharf, Daniel; Acikmese, Behcet; Ploen, Scott; Hadaegh, Fred

    2010-01-01

    The reactive collision avoidance (RCA) algorithm allows a spacecraft to find a fuel-optimal trajectory for avoiding an arbitrary number of colliding spacecraft in real time while accounting for acceleration limits. In addition to spacecraft, the technology can be used for vehicles that can accelerate in any direction, such as helicopters and submersibles. In contrast to existing, passive algorithms that simultaneously design trajectories for a cluster of vehicles working to achieve a common goal, RCA is implemented onboard spacecraft only when an imminent collision is detected, and then plans a collision avoidance maneuver for only that host vehicle, thus preventing a collision in an off-nominal situation for which passive algorithms cannot. An example scenario for such a situation might be when a spacecraft in the cluster is approaching another one, but enters safe mode and begins to drift. Functionally, the RCA detects colliding spacecraft, plans an evasion trajectory by solving the Evasion Trajectory Problem (ETP), and then recovers after the collision is avoided. A direct optimization approach was used to develop the algorithm so it can run in real time. In this innovation, a parameterized class of avoidance trajectories is specified, and then the optimal trajectory is found by searching over the parameters. The class of trajectories is selected as bang-off-bang as motivated by optimal control theory. That is, an avoiding spacecraft first applies full acceleration in a constant direction, then coasts, and finally applies full acceleration to stop. The parameter optimization problem can be solved offline and stored as a look-up table of values. Using a look-up table allows the algorithm to run in real time. Given a colliding spacecraft, the properties of the collision geometry serve as indices of the look-up table that gives the optimal trajectory. For multiple colliding spacecraft, the set of trajectories that avoid all spacecraft is rapidly searched on

  9. Mannuronic Acids : Reactivity and Selectivity

    NARCIS (Netherlands)

    Codee, Jeroen D. C.; Walvoort, Marthe T. C.; de Jong, Ana-Rae; Lodder, Gerrit; Overkleeft, Herman S.; van der Marel, Gijsbert A.

    2011-01-01

    This review describes our recent studies toward the reactivity and selectivity of mannopyranosyl uronic acid donors, which have been found to be very powerful donors for the construction of beta-mannosidic linkages.

  10. Climate effects of a hypothetical regional nuclear war: Sensitivity to emission duration and particle composition

    Science.gov (United States)

    Pausata, Francesco S. R.; Lindvall, Jenny; Ekman, Annica M. L.; Svensson, Gunilla

    2016-11-01

    Here, we use a coupled atmospheric-ocean-aerosol model to investigate the plume development and climate effects of the smoke generated by fires following a regional nuclear war between emerging third-world nuclear powers. We simulate a standard scenario where 5 Tg of black carbon (BC) is emitted over 1 day in the upper troposphere-lower stratosphere. However, it is likely that the emissions from the fires ignited by bomb detonations include a substantial amount of particulate organic matter (POM) and that they last more than 1 day. We therefore test the sensitivity of the aerosol plume and climate system to the BC/POM ratio (1:3, 1:9) and to the emission length (1 day, 1 week, 1 month). We find that in general, an emission length of 1 month substantially reduces the cooling compared to the 1-day case, whereas taking into account POM emissions notably increases the cooling and the reduction of precipitation associated with the nuclear war during the first year following the detonation. Accounting for POM emissions increases the particle size in the short-emission-length scenarios (1 day/1 week), reducing the residence time of the injected particle. While the initial cooling is more intense when including POM emission, the long-lasting effects, while still large, may be less extreme compared to the BC-only case. Our study highlights that the emission altitude reached by the plume is sensitive to both the particle type emitted by the fires and the emission duration. Consequently, the climate effects of a nuclear war are strongly dependent on these parameters.

  11. Comparison of costs for three hypothetical alternative kitchen waste management systems.

    Science.gov (United States)

    Schiettecatte, Wim; Tize, Ronald; De Wever, Heleen

    2014-11-01

    Urban water and waste management continues to be a major challenge, with the Earth's population projected to rise to 9 billion by 2050, with 70% of this population expected to live in cities. A combined treatment of wastewater and the organic fraction of municipal solid waste offers opportunities for improved environmental protection and energy recovery, but the collection and transport of organic wastes must be cost effective. This study compares three alternative kitchen waste collection and transportation systems for a virtual modern urban area with 300,000 residents and a population density of 10,000 persons per square kilometre. Door-to-door collection, being the standard practice in modern urban centres, remains the most economically advantageous at a cost of 263 euros per tonne of kitchen waste. Important drawbacks are the difficult logistics, increased city traffic, air and noise pollution. The quieter, cleaner and more hygienic vacuum transport of kitchen waste comes with a higher cost of 367 euros per tonne, mainly resulting from a higher initial investment cost for the system installation. The third option includes the well-known use of under-sink food waste disposers (often called garbage grinders) that are connected to the kitchen's wastewater piping system, with a total yearly cost of 392 euros per tonne. Important advantages with this system are the clean operation and the current availability of a city-wide sewage conveyance pipeline system. Further research is recommended, for instance the application of a life cycle assessment approach, to more fully compare the advantages and disadvantages of each option. © The Author(s) 2014.

  12. Fuel Temperature Coefficient of Reactivity

    Energy Technology Data Exchange (ETDEWEB)

    Loewe, W.E.

    2001-07-31

    A method for measuring the fuel temperature coefficient of reactivity in a heterogeneous nuclear reactor is presented. The method, which is used during normal operation, requires that calibrated control rods be oscillated in a special way at a high reactor power level. The value of the fuel temperature coefficient of reactivity is found from the measured flux responses to these oscillations. Application of the method in a Savannah River reactor charged with natural uranium is discussed.

  13. Cues of High and Low Body Weight Negatively Influence Adults' Perceptions and Ratings in the Hypothetical Adoption Paradigm

    Directory of Open Access Journals (Sweden)

    Anthony A. Volk

    2006-01-01

    Full Text Available Infant and child facial cues influence perceptions and ratings in the Hypothetical Adoption Paradigm as well as actual parental care. A previous study demonstrated that infant and child facial cues of low body weight negatively influenced adults' ratings. The current study sought to replicate and expand on those results by presenting adults with normal faces as well as faces that were digitally altered to display high or low body weight. Cues of abnormal body weight significantly, and negatively, influenced adults’ ratings of adoption preference, health, and cuteness. Effect sizes were larger for cues of high body weight. Thus, infant and child facial cues of abnormal body weight may represent a relative risk factor to the quality of adult care obtained by children with abnormal body weight.

  14. Structural properties of hypothetical CeBa2Cu3O7 compound from LSDA+DMFT calculations

    Directory of Open Access Journals (Sweden)

    Łuszczek Maciej

    2016-09-01

    Full Text Available The hypothetical stoichiometric CeBa2Cu3O7 (Ce123 compound, which has not been synthesized as a single phase yet, was studied by the density functional theory (DFT. We utilized a method which merges the local spin density approximation (LSDA with the dynamical mean-field theory (DMFT to account for the electronic correlations. The LSDA+DMFT calculations were performed in the high-temperature range. The particular emphasis was put on the pressure-induced changes in the electronic band structure related to strongly correlated 4f states. The computational results indicate the occurrence of a large negative volumetric thermal expansion coefficient near T = 500 K and a trace of a low-volume isostructural metastable state at high temperatures.

  15. Conserved hypothetical protein Rv1977 in Mycobacterium tuberculosis strains contains sequence polymorphisms and might be involved in ongoing immune evasion.

    Science.gov (United States)

    Jiang, Yi; Liu, Haican; Wang, Xuezhi; Li, Guilian; Qiu, Yan; Dou, Xiangfeng; Wan, Kanglin

    2015-01-01

    Host immune pressure and associated parasite immune evasion are key features of host-pathogen co-evolution. A previous study showed that human T cell epitopes of Mycobacterium tuberculosis are evolutionarily hyperconserved and thus it was deduced that M. tuberculosis lacks antigenic variation and immune evasion. Here, we selected 151 clinical Mycobacterium tuberculosis isolates from China, amplified gene encoding Rv1977 and compared the sequences. The results showed that Rv1977, a conserved hypothetical protein, is not conserved in M. tuberculosis strains and there are polymorphisms existed in the protein. Some mutations, especially one frameshift mutation, occurred in the antigen Rv1977, which is uncommon in M.tb strains and may lead to the protein function altering. Mutations and deletion in the gene all affect one of three T cell epitopes and the changed T cell epitope contained more than one variable position, which may suggest ongoing immune evasion.

  16. Modelling the long-term consequences of a hypothetical dispersal of radioactivity in an urban area including remediation alternatives

    DEFF Research Database (Denmark)

    Thiessen, K.M.; Andersson, Kasper Grann; Batandjieva, B.

    2009-01-01

    The Urban Remediation Working Group of the International Atomic Energy Agency's EMRAS (Environmental Modelling for Radiation Safety) program was organized to address issues of remediation assessment modelling for urban areas contaminated with dispersed radionuclides. The present paper describes...... the second of two modelling exercises. This exercise was based on a hypothetical dispersal of radioactivity in an urban area from a radiological dispersal device, with reference surface contamination at selected sites used as the primary input information. Modelling endpoints for the exercise included...... radionuclide concentrations and external dose rates at specified locations, contributions to the dose rates from individual surfaces, and annual and cumulative external doses to specified reference individuals. Model predictions were performed for a "no action" situation (with no remedial measures...

  17. Preliminary scenarios for the release of radioactive waste from a hypothetical repository in basalt of the Columbia Plateau

    International Nuclear Information System (INIS)

    Hunter, R.L.

    1983-10-01

    Nine release phenomena - normal flow of water, tectonic disturbance of the fracture network, intersection of a new fault with the repository, glaciation, fluvia erosion, thermomechanical disturbances, subsidence, seal failure, and drilling - give rise to 318 preliminary scenarios for the release of waste from a hypothetical high-level-waste repository in basalt. The scenarios have relative probabilities that range over several orders of magnitude. The relative probabilities provide a means of screening the scenarios for the more limited set to be subjected to consequence analysis. Lack of data and of preliminary modeling, however, lead to great uncertainties in the highly conservative probabilities assigned here. As a result, the recommendations in this report are directed at resolution of the major uncertainties in the relative probabilities of the preliminary scenarios. The resolution of some of the uncertainties should help in the selection of the suite of scenarios for final consequence analysis. 38 references, 22 figures, 18 tables

  18. Thermal-hydraulics of wave propagation and pressure distribution under hypothetical steam explosion conditions in the ANS reactor

    Energy Technology Data Exchange (ETDEWEB)

    Taleyarkhan, R.P.; Georgevich, V.; N-Valenit, S.; Kim, S.H. [Oak Ridge National Lab., TN (United States)

    1995-09-01

    This paper describes salient aspects of the modeling and analysis framework for evaluation of dynamic loads, wave propagation, and pressure distributions (under hypothetical steam explosion conditions) around key structural boundaries of the Advanced Neutron Source (ANS) reactor core region. A staged approach was followed, using simple thermodynamic models for bounding loads and the CTH code for evaluating realistic estimates in a staged multidimensional framework. Effects of nodalization, melt dispersal into coolant during explosion, single versus multidirectional dissipation, energy level of melt, and rate of energy deposition into coolant were studied. The importance of capturing multidimensional effects that simultaneously account for fluid-structural interactions was demonstrated. As opposed to using bounding loads from thermodynamic evaluations, it was revealed that the ANS reactor system will not be vulnerable to vertically generated missiles that threaten containment if realistic estimates of energetics are used (from CTH calculations for thermally generated steam explosions without significant aluminum ignition).

  19. Sizing of type B package tie-downs on the basis of criteria related to hypothetical road transport accident conditions

    International Nuclear Information System (INIS)

    Phalippou, C.

    1986-01-01

    The aim is to guarantee intactness of the type B package containment system under hypothetical road accident conditions. Some experiments performed in France have led to analytical studies taking into account: a) the head-on collision, which is modelised by a uniform deceleration of 35 g, b) the side-on collision, which is modelised by a colliding object 3 times heavier than the package and an impact at 31.9 km/h. In the first case, the adopted criterion is the holding of the package on the vehicle by the strenght of the stowing members (tie-downs and chocks). In the second case, the adopted criterion is the desired breaking of the tie-downs in order to undamage package containment system; therefore it is assumed that no chock is acting against lateral impacts. Analytical and abacus methods have been developed for sizing the strenght of the stowing members in respect with the two above criteria [fr

  20. Dose assessment for public by packages shipping radioactive materials hypothetically sunk on the continental shelf. Annex 3

    International Nuclear Information System (INIS)

    Tsumune, Daisuke; Suzuki, Hiroshi; Saegusa, Toshiari; Watabe, Naohito; Asano, Hiroyuki; Maruyama, Koki; Kinehara, Yoshiki

    2001-01-01

    Radioactive materials such as spent fuel (SF), PuO 2 powder, high level wastes (HLW) and fresh mixed oxide (MOX) fuel have been transported by sea between Europe and Japan. Dose assessments for public have been performed in the past when the packages shipping radioactive materials were hypothetically sunk on the continental shelf. These studies employed various conditions and methods in their assessments and the results were not always the same. In this study, the dose assessment for these packages was performed under the same conditions and by the same methods. The effective dose equivalents of radiation exposure to the public for all materials become smaller than the previous evaluations due to more realistic assumption in this study. These evaluated results are far less than the effective dose equivalent limit (1 mSv year -1 ) by the ICRP recommendation. (author)

  1. A comparison between tandem and ovoids and interstitial gynecologic template brachytherapy dosimetry using a hypothetical computer model

    International Nuclear Information System (INIS)

    Hsu, I-Chow J.; Speight, Joycelyn; Hai, Jenny; Vigneault, Eric; Phillips, Theodore; Pouliot, Jean

    2002-01-01

    Purpose: To evaluate the dose distribution within the clinical target volume between two gynecologic brachytherapy systems - the tandem and ovoids and the Syed-Neblett gynecologic template - using a hypothetical computer model. Methods and Materials: Source positions of an intracavitary system (tandem and ovoids) and an interstitial system (GYN template) were digitized into the Nucletron Brachytherapy Planning System. The GYN template is composed of a 13-catheter implant (12 catheters plus a tandem) based on the Syed-Neblett gynecologic template. For the tandem and ovoids, the dwell times of all sources were evenly weighted to produce a pear-shaped isodose distribution. For the GYN template, the dwell times were determined using volume optimization. The prescribed dose was then normalized to point A in the intracavitary system and to a selected isodose line in the interstitial system. The treated volume in the two systems was kept approximately the same, and a cumulative dose-volume histogram of the treated volume was then generated with the Nucletron Brachytherapy Planning System to use for comparison. To evaluate the dose to a hypothetical target, in this case the cervix, a 2-cm-long, 3-cm-diameter cylinder centered along the tandem was digitized as the clinical target volume. The location of this hypothetical cervix was based on the optimal application of the brachytherapy system. A visual comparison of clinical target coverage by the treated volume on three different orthogonal planes through the treated volume was performed. The percentage dose-volume histograms of the target were generated for comparison. Multiple midline points were also placed at 5-mm intervals away from the tandem in the plane of the cervix to simulate the location of potential bladder and rectal dose points. Doses to these normal structures were calculated for comparison. Results: Although both systems covered the hypothetical cervix adequately, the interstitial system had a better

  2. Long-term consequences for Northern Norway of a hypothetical release from the Kola nuclear power plant

    International Nuclear Information System (INIS)

    Howard, B.J.; Wright, S.M.; Salbu, B.; Skuterud, K.L.; Hove, K.; Loe, R.

    2004-01-01

    The spatial and temporal variation in radiocaesium and 90 Sr doses to two population groups of the two Northernmost counties of Norway, Troms and Finnmark, following a hypothetical accident at the Kola nuclear power plant (KNPP) have been estimated using a model implemented within a geographical information system. The hypothetical accident assumes a severe loss of coolant accident at the KNPP coincident with meteorological conditions causing significant radionuclide deposition in the two counties. External doses are estimated from ground deposition and the behaviour of the different population groups, and internal doses from predicted food product activity concentrations and dietary consumption data. Doses are predicted for reindeer keepers and other Norwegian inhabitants, taking account of existing 137 Cs and 90 Sr deposition but not including the remedial effect of any countermeasures that might be used. The predicted doses, arising mainly from radiocaesium, confirm the Arctic Monitoring and Assessment Programme assessment that residents of the Arctic are particularly vulnerable to radiocaesium contamination, which could persist for many years. External doses are predicted to be negligible compared to ingestion doses. Ingestion doses for reindeer keepers are predicted to exceed 1 mSv y -1 for several decades primarily due to their high consumption of reindeer meat. Other Norwegians would also be potentially exposed to doses exceeding 1 mSv y -1 for several years, especially if they consume many local products. Whilst reindeer production is the most important exposure pathway, freshwater fish, lamb meat, dairy products, mushrooms and berries are also significant contributors to predicted ingestion doses. Radionuclide fluxes, defined as the total output of radioactivity in food from an area for a unit time, are dominated by reindeer meat. The results show the need for an effective emergency response, with appropriate countermeasures, should an accident of the

  3. Does message framing predict willingness to participate in a hypothetical HIV vaccine trial: an application of Prospect Theory.

    Science.gov (United States)

    Evangeli, Michael; Kafaar, Zuhayr; Kagee, Ashraf; Swartz, Leslie; Bullemor-Day, Philippa

    2013-01-01

    It is vital that enough participants are willing to participate in clinical trials to test HIV vaccines adequately. It is, therefore, necessary to explore what affects peoples' willingness to participate (WTP) in such trials. Studies have only examined individual factors associated with WTP and not the effect of messages about trial participation on potential participants (e.g., whether losses or gains are emphasized, or whether the outcome is certain or uncertain). This study explores whether the effects of message framing on WTP in a hypothetical HIV vaccine trial are consistent with Prospect Theory. This theory suggests that people are fundamentally risk averse and that (1) under conditions of low risk and high certainty, gain-framed messages will be influential (2) under conditions of high risk and low certainty, loss-framed messages will be influential. This cross-sectional study recruited 283 HIV-negative students from a South African university who were given a questionnaire that contained matched certain gain-framed, certain loss-framed, uncertain gain-framed, and uncertain loss-framed statements based on common barriers and facilitators of WTP. Participants were asked to rate how likely each statement was to result in their participation in a hypothetical preventative HIV vaccine trial. Consistent with Prospect Theory predictions, for certain outcomes, gain-framed messages were more likely to result in WTP than loss-framed messages. Inconsistent with predictions, loss-framed message were not more likely to be related to WTP for uncertain outcomes than gain-framed messages. Older students were less likely to express their WTP across the different message frames. Recruitment for HIV vaccine trials should pay attention to how messages about the trial are presented to potential participants.

  4. Redefining Perinatal Experience: A Philosophical Exploration of a Hypothetical Case of Gender-Diversity in Labour and Birth.

    Science.gov (United States)

    Richardson, Brianna; Price, Sheri; Campbell-Yeo, Marsha

    2018-05-18

    Using a queer phenomenological approach, the objective of this philosophical analysis is to explore the transgender experience in highly gendered clinical areas, such as the birth unit, and make recommendations on how to provide perinatal care that is inclusive of gender diversity within these areas. This paper aims to describes a hypothetical clinical experience to provide insight on the institutional barriers that currently exist and to provide nurses and midwives with pragmatic strategies to enhance gender-diverse care in general and gendered clinical areas. Currently, general healthcare providers are not sufficiently educated on how to care for and meet the needs of people who identify as lesbian, gay, bisexual, trans, queer, queer or questioning and other communities (LGBTQ+). This vulnerable population continually faces stigma, discrimination, and marginalization, which act as barriers to accessing healthcare services. Although transgender people often have difficulty accessing healthcare in general settings, they experience an even greater challenge within traditionally gendered clinical care areas. Queer Phenomenology was used to guide a critical philosophical analysis of hypothetical case reflecting a clinical scenario regarding a transgender man's experience in labour and birth. Healthcare professionals often provide insufficient care to transgender persons, inadvertently leading to further marginalization of this vulnerable population. Special consideration to provide gender-diverse care throughout the perinatal period is needed. Structures and supports are essential to enhance the care from providers in attending to the unique needs of transgender individuals and reduce oppressive effects from heteronormative environments. Nurses and midwives are leading exemplars of providing person-centered care and are capable of advocating for equitable care amongst all populations to influence systemic change. Strategies for implementing changes that address LGBTQ

  5. Atmospheric dispersion modeling and radiological safety analysis for a hypothetical accident of Ghana Research Reactor -1 (GHARR-1)

    International Nuclear Information System (INIS)

    Lunguya, J. M.

    2013-06-01

    This work presents the environmental impact analysis of some selected radionuclides released from the Ghana Research Reactor- 1 (GHARR-1) after a hypothetical postulated accidents scenario. The source term was identified and generated from an inventory of radioisotopes released during the accident. Atmospheric transport model was then applied to calculate the total effective dose and how it would be distributed to different organs of the human body as a function of distance downwind. All accident scenarios were selected from GHARR-1 Safety Analysis Report. After the source term was identified the MCNPX code was used to perform the core burnup/depletion analysis. The assumption was made that the activities were released to the atmosphere under a horse design basis accident scenario. The gaussian dose calculation method was applied, coded in Hotspot, a Healthy Physics computer code. This served as the computational tool to perform the atmospheric dispersion modeling and was used to calculate radionuclide concentration at downwind location. Based upon predominant meteorological conditions at the site, the adopted strategy was to use site-specific meteorological data and dispersion modeling to analyze the hypothetical release to the environment of radionuclides and evaluate to what extent such a release may have radiological effects on the public. Final data were processed and presented as Total Effective Dose Equivalent as a function of time and distance of deposition. The results indicate that all the values of Effective dose obtained are far below the regulatory limits, making the use of the reactor safe, even in the case of worst accident scenario where all the fission products were released into the atmosphere. (au)

  6. Analyses to demonstrate the structural performance of the CASTOR KN12 in hypothetical accident drop accident scenarios

    International Nuclear Information System (INIS)

    Diersch, R.; Weiss, M.; Tso, C.F.; Chung, S.H.; Lee, H.Y.

    2004-01-01

    CASTORc ircledR KN-12 is a new cask design by GNB for KHNP-NETEC for dry and wet transportation of up to twelve spent PWR fuel assemblies in Korea. It received its transport license from the Korean Competent Authority KINS in July 2002 and is now in use in South Korea. It has been designed to satisfy the regulatory requirements of the 10 CFR 71 and the IAEA ST-1 for Type B(U)F packages. Its structural performance was demonstrated against the load cases and boundary conditions as defined in 10 CFR 71 and NRC's Regulatory Guide 7.8, and further explained in NUREG 1617. This included normal conditions of transport load cases - including Hot Environment, Cold Environment, Increased External Pressure (140MPa), Minimum External Pressure (24.5kPa), Vibration and shock, and 0.3m free drop - and the hypothetical accident conditions load cases - including the 9m Free Drop, Puncture, Thermal Fire Accident, 200m Water Immersion and 1.5 x MNOP Internal Pressure. Structural performance were demonstrated by analysis, including state-of-the-art finite element (FE) simulation, and confirmed by tests using a 1/3-scale model. Test results were also used to verify the numerical tool and the methods used in the analyses. All the structural analyses including validation against drop tests were carried out by Arup, and testing were carried out by KAERI. This paper concentrates on the analysis carried out to demonstrate performance in the hypothetical accident 9m free drop scenarios, and results from a small selection of them

  7. Analyses to demonstrate the structural performance of the CASTOR KN12 in hypothetical accident drop accident scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Diersch, R.; Weiss, M. [Gesellschaft fuer Nuklear-Behaelter mbH (Germany); Tso, C.F. [Arup (United Kingdom); Chung, S.H.; Lee, H.Y. [KHNP-NETEC (Korea)

    2004-07-01

    CASTORc{sup ircledR} KN-12 is a new cask design by GNB for KHNP-NETEC for dry and wet transportation of up to twelve spent PWR fuel assemblies in Korea. It received its transport license from the Korean Competent Authority KINS in July 2002 and is now in use in South Korea. It has been designed to satisfy the regulatory requirements of the 10 CFR 71 and the IAEA ST-1 for Type B(U)F packages. Its structural performance was demonstrated against the load cases and boundary conditions as defined in 10 CFR 71 and NRC's Regulatory Guide 7.8, and further explained in NUREG 1617. This included normal conditions of transport load cases - including Hot Environment, Cold Environment, Increased External Pressure (140MPa), Minimum External Pressure (24.5kPa), Vibration and shock, and 0.3m free drop - and the hypothetical accident conditions load cases - including the 9m Free Drop, Puncture, Thermal Fire Accident, 200m Water Immersion and 1.5 x MNOP Internal Pressure. Structural performance were demonstrated by analysis, including state-of-the-art finite element (FE) simulation, and confirmed by tests using a 1/3-scale model. Test results were also used to verify the numerical tool and the methods used in the analyses. All the structural analyses including validation against drop tests were carried out by Arup, and testing were carried out by KAERI. This paper concentrates on the analysis carried out to demonstrate performance in the hypothetical accident 9m free drop scenarios, and results from a small selection of them.

  8. Modeling fates and impacts for bio-economic analysis of hypothetical oil spill scenarios in San Francisco Bay

    International Nuclear Information System (INIS)

    French McCay, D.; Whittier, N.; Sankaranarayanan, S.; Jennings, J.; Etkin, D.S.

    2002-01-01

    The oil spill risks associated with four submerged rock pinnacles near Alcatraz Island in San Francisco Bay are being evaluated by the United States Army Corps of Engineers. Oil spill modeling has been conducted for a hypothetical oil spill to determine biological impacts, damages to natural resources and response costs. The scenarios are hypothetical vessel grounding on the pinnacles. The SIMAP modeling software by the Applied Science Associates was used to model 3 spill sizes (20, 50 and 95 percentile by volume) and 4 types of oil (gasoline, diesel, heavy fuel oil, and crude oil). The frequency distribution of oil fates and impacts was determined by first running each scenario in stochastic mode. The oil fates and biological effects of the spills were the focus of this paper. It was shown that diesel and crude oil spills would have greater impacts in the water column than heavy fuel or gasoline because gasoline is more volatile and less toxic and because heavy oil spills would be small in volume. It was determined that the major impacts and damage to birds would be low due to the high dilution potential of the bay. It was also noted that dispersants would be very effective in reducing impacts on wildlife and the shoreline. These results are being used to evaluate the cost-benefit analysis of removing the rocks versus the risk of an oil spill. The work demonstrates a statistically quantifiable method to estimate potential impacts that could be used in ecological risk assessment and cost-benefit analysis. 15 refs., 13 tabs., 11 figs

  9. Role of Fault Attributions and Other Factors in Adults' Attitudes Toward Hypothetical Children With an Undesirable Characteristic.

    Science.gov (United States)

    Wadian, Taylor W; Sonnentag, Tammy L; Jones, Tucker L; Barnett, Mark A

    2018-01-01

    A total of 184 adults read descriptions of six hypothetical children with various undesirable characteristics (i.e., being extremely overweight, extremely aggressive, extremely shy, a poor student, a poor athlete, displaying symptoms of attention deficit hyperactivity disorder). Following each description, the participants were asked to rate how much they disagree or agree that the child, the child's parents, and the child's biological condition (i.e., "something wrong inside the child's body or brain") are at fault for the onset and the perpetuation of the undesirable characteristic. In addition, the participants were asked to rate their attitude toward each child using a 100-point "feeling thermometer." Analyses of the participants' various fault attribution ratings revealed that they tended to agree more strongly that a child's parents and his/her biological condition are at fault for the onset and the perpetuation of the child's undesirable characteristic than is the child him/herself. Despite the participants' reluctance to blame a hypothetical child for his/her undesirable characteristic, regression analyses revealed that, in general, the more they blamed the child for the onset of his/her undesirable characteristic, the more negative their attitude was toward the child. However, the participants' ratings of the extent to which the child's parents or biological condition are at fault for the onset and the perpetuation of the child's undesirable characteristic were not found to be associated with their attitude toward any of the children. Similarities and differences between the present findings and those reported in prior studies involving younger individuals are addressed.

  10. Response to hypothetical social scenarios in individuals with traumatic brain injury who present inappropriate social behavior: a preliminary report.

    Science.gov (United States)

    Gagnon, Jean; Henry, Anne; Decoste, François-Pierre; Ouellette, Michel; McDuff, Pierre; Daelman, Sacha

    2013-03-01

    Very little research thus far has examined the decision making that underlies inappropriate social behavior (ISB) post-TBI (traumatic brain injury). To verify the usefulness of a new instrument, the Social Responding Task, for investigating whether, in social decision making, individuals with TBI, who present inappropriate social behavior (ISB), have difficulty anticipating their own feelings of embarrassment and others' angry reactions following an ISB. Seven subjects with TBI presenting with inappropriate social behavior (TBI-ISB), 10 presenting with appropriate social behavior (TBI-ASB), and 15 healthy controls were given 12 hypothetical scenarios three times, each time ending with a different behavioral response. Subjects were asked to gauge the likelihood of their displaying the behavior in that situation (part A) and of it being followed by an angry reaction from the other or by feelings of embarrassment in themselves (part B). TBI-ISB subjects scored higher than TBI-ASB and healthy controls on a scale of likelihood of displaying an ISB. RESULTS regarding expectations of angry reactions from others and feelings of embarrassment after an ISB were similar among groups. Negative correlations between endorsement of an inappropriate behavior and anticipation of negative emotional consequences were significant for both TBI-ASB and control subjects, but not for TBI-ISB subjects. RESULTS suggest that the TBI-ISB participants were likely to endorse an ISB despite being able to anticipate a negative emotional response in themselves or others, suggesting that there were other explanations for their poor behavior. A self-reported likely response to hypothetical social scenarios can be a useful approach for studying the neurocognitive processes behind the poor choices of individuals with TBI-ISB, but the task needs further validation studies. A comprehensive discussion follows on the underlying mechanisms affecting social behaviors after a TBI.

  11. Response to Hypothetical Social Scenarios in Individuals with Traumatic Brain Injury Who Present Inappropriate Social Behavior: A Preliminary Report

    Directory of Open Access Journals (Sweden)

    Michel Ouellette

    2013-01-01

    Full Text Available Background: Very little research thus far has examined the decision making that underlies inappropriate social behavior (ISB post-TBI (traumatic brain injury. Objectives: To verify the usefulness of a new instrument, the Social Responding Task, for investigating whether, in social decision making, individuals with TBI, who present inappropriate social behavior (ISB, have difficulty anticipating their own feelings of embarrassment and others’ angry reactions following an ISB. Methods: Seven subjects with TBI presenting with inappropriate social behavior (TBI-ISB, 10 presenting with appropriate social behavior (TBI-ASB, and 15 healthy controls were given 12 hypothetical scenarios three times, each time ending with a different behavioral response. Subjects were asked to gauge the likelihood of their displaying the behavior in that situation (part A and of it being followed by an angry reaction from the other or by feelings of embarrassment in themselves (part B. Results: TBI-ISB subjects scored higher than TBI-ASB and healthy controls on a scale of likelihood of displaying an ISB. Results regarding expectations of angry reactions from others and feelings of embarrassment after an ISB were similar among groups. Negative correlations between endorsement of an inappropriate behavior and anticipation of negative emotional consequences were significant for both TBI-ASB and control subjects, but not for TBI-ISB subjects. Conclusions: Results suggest that the TBI-ISB participants were likely to endorse an ISB despite being able to anticipate a negative emotional response in themselves or others, suggesting that there were other explanations for their poor behavior. A self-reported likely response to hypothetical social scenarios can be a useful approach for studying the neurocognitive processes behind the poor choices of individuals with TBI-ISB, but the task needs further validation studies. A comprehensive discussion follows on the underlying

  12. Pediatrician’s cough and cold medication prescription for hypothetical cases – A cross-sectional multi-centric study

    Directory of Open Access Journals (Sweden)

    Sudha Chandelia

    2016-03-01

    Full Text Available Background: Concerns over inappropriate use of cough and cold medication (CCM in children have been raised. In addition to being ineffective, these are now considered toxic for young children. Despite this fact studies from some regions have shown high use of these medications by physicians. However data on pediatricians and from India are negligible. Aim: To study the burden and patterns of cough and cold medications use by pediatricians for hypothetical cases. Methods: In this cross-sectional study; 172 pediatricians of various hospitals of Delhi and Haryana were enrolled from February 15 to March 15, 2012. They were contacted personally by authors and asked to write their prescriptions for two hypothetical case scenarios [having cough and cold] of two different age groups; (1 less than 2 years and (2 2–5 years. We made two categories as recommendations exist for children less than 2 years while recommendations for the second category are underway. Results were summarized as percentages, counts and; presented in tables and figures. Chi square test was used to establish association between categorical variables of subgroups. Results: Response rate was 93%. The most used CCM was antihistaminics (82% and systemic sympathomimetics (48%. The use of CCM was significantly less in teaching hospitals as compared to non-teaching (77% vs. 95%; p-value – 0.025. However there was no statistical difference in the practice of post graduates and more senior pediatricians (p value-0.895. No difference in CCM use in two age groups {(82% (less than 2 years vs. 85% (2–5 years; p-value – 0.531} was observed. Conclusion: Overall use of CCM is still high irrespective of patient age, pediatrician’s seniority or hospital setting. Efforts should be made to create awareness among the pediatricians regarding cautious use of these medications.

  13. [Hyper-reactive malarial splenomegaly].

    Science.gov (United States)

    Maazoun, F; Deschamps, O; Barros-Kogel, E; Ngwem, E; Fauchet, N; Buffet, P; Froissart, A

    2015-11-01

    Hyper-reactive malarial splenomegaly is a rare and severe form of chronic malaria. This condition is a common cause of splenomegaly in endemic areas. The pathophysiology of hyper-reactive malarial splenomegaly involves an intense immune reaction (predominantly B cell-driven) to repeated/chronic infections with Plasmodium sp. The diagnosis may be difficult, due to a poorly specific clinical presentation (splenomegaly, fatigue, cytopenias), a long delay between residence in a malaria-endemic area and onset of symptoms, and a frequent absence of parasites on conventional thin and thick blood smears. A strongly contributive laboratory parameter is the presence of high levels of total immunoglobulin M. When the diagnostic of hyper-reactive malarial splenomegaly is considered, search for anti-Plasmodium antibodies and Plasmodium nucleic acids (genus and species) by PCR is useful. Diagnosis of hyper-reactive malarial splenomegaly relies on the simultaneous presence of epidemiological, clinical, biological and follow-up findings. Regression of both splenomegaly and hypersplenism following antimalarial therapy allows the differential diagnosis with splenic lymphoma, a common complication of hyper-reactive malarial splenomegaly. Although rare in Western countries, hyper-reactive malarial splenomegaly deserves increased medical awareness to reduce the incidence of incorrect diagnosis, to prevent progression to splenic lymphoma and to avoid splenectomy. Copyright © 2015 Société nationale française de médecine interne (SNFMI). Published by Elsevier SAS. All rights reserved.

  14. Reactive sites influence in PMMA oligomers reactivity: a DFT study

    Science.gov (United States)

    Paz, C. V.; Vásquez, S. R.; Flores, N.; García, L.; Rico, J. L.

    2018-01-01

    In this work, we present a theoretical study of methyl methacrylate (MMA) living anionic polymerization. The study was addressed to understanding two important experimental observations made for Michael Szwarc in 1956. The unexpected effect of reactive sites concentration in the propagation rate, and the self-killer behavior of MMA (deactivating of living anionic polymerization). The theoretical calculations were performed by density functional theory (DFT) to obtain the frontier molecular orbitals values. These values were used to calculate and analyze the chemical interaction descriptors in DFT-Koopmans’ theorem. As a result, it was observed that the longest chain-length species (related with low concentration of reactive sites) exhibit the highest reactivity (behavior associated with the increase of the propagation rate). The improvement in this reactivity was attributed to the crosslinking produced in the polymethyl methacrylate chains. Meanwhile, the self-killer behavior was associated with the intermolecular forces present in the reactive sites. This behavior was associated to an obstruction in solvation, since the active sites remained active through all propagation species. The theoretical results were in good agreement with the Szwarc experiments.

  15. Diffusive–Dispersive and Reactive Fronts in Porous Media

    DEFF Research Database (Denmark)

    Haberer, Christina M.; Muniruzzaman, Muhammad; Grathwohl, Peter

    2015-01-01

    , across the unsaturated–saturated interface, under both conservative and reactive transport conditions. As reactive system we considered the abiotic oxidation of Fe2+ in the presence of O2. We studied the reaction kinetics in batch experiments and its coupling with diffusive and dispersive transport...... processes by means of one-dimensional columns and two-dimensional flow-through experiments, respectively. A noninvasive optode technique was used to track O2 transport into the initially anoxic porous medium at highly resolved spatial and temporal scales. The results show significant differences...

  16. Study on reactive extrusion processes of block copolymer

    International Nuclear Information System (INIS)

    Wu Lili; Jia Yuxi; Sun Sheng; Zhang Guofang; Zhao Guoqun; An Lijia

    2007-01-01

    The anionic copolymerization process of styrene-butadiene (S/B) block copolymer in a closely intermeshing co-rotating twin screw extruder with butyl-lithium initiator was studied. According to the anionic copolymerization mechanism and the reactive extrusion characteristics, the mathematical models of monomer conversion, average molecular weight and fluid viscosity during the anionic copolymerization of S/B were constructed, and then the reactive extrusion process was simulated by means of the finite volume method and the uncoupled semi-implicit iterative algorithm. Finally, the influence of the feeding mixture composition on conversion was discussed. The simulated results were nearly in agreement with the experimental results

  17. Reactive Strength Index: A Poor Indicator of Reactive Strength?

    Science.gov (United States)

    Healy, Robin; Kenny, Ian; Harrison, Drew

    2017-11-28

    The primary aim was to assess the relationships between reactive strength measures and associated kinematic and kinetic performance variables achieved during drop jumps. A secondary aim was to highlight issues with the use of reactive strength measures as performance indicators. Twenty eight national and international level sprinters, consisting of fourteen men and women, participated in this cross-sectional analysis. Athletes performed drop jumps from a 0.3 m box onto a force platform with dependent variables contact time (CT), landing time (TLand), push-off time (TPush), flight time (FT), jump height (JH), reactive strength index (RSI, calculated as JH / CT), reactive strength ratio (RSR, calculated as FT / CT) and vertical leg spring stiffness (Kvert) recorded. Pearson's correlation test found very high to near perfect relationships between RSI and RSR (r = 0.91 to 0.97), with mixed relationships found between RSI, RSR and the key performance variables, (Men: r = -0.86 to -0.71 between RSI/RSR and CT, r = 0.80 to 0.92 between RSI/RSR and JH; Women: r = -0.85 to -0.56 between RSR and CT, r = 0.71 between RSI and JH). This study demonstrates that the method of assessing reactive strength (RSI versus RSR) may be influenced by the performance strategies adopted i.e. whether an athlete achieves their best reactive strength scores via low CTs, high JHs or a combination. Coaches are advised to limit the variability in performance strategies by implementing upper and / or lower CT thresholds to accurately compare performances between individuals.

  18. Biodecolorization and biodegradation of Reactive Blue by ...

    African Journals Online (AJOL)

    SERVER

    2007-06-18

    Jun 18, 2007 ... Aspergillus sp. effectively decolorized Reactive Blue and other structurally different synthetic dyes. Agitation was found to be an important ... Few chemically different dyes such as Reactive Black (75%), Reactive Yellow (70%),. Reactive Red (33%) and ..... Degradation of azo dyes by the lignin degrading ...

  19. Substation Reactive Power Regulation Strategy

    Science.gov (United States)

    Zhang, Junfeng; Zhang, Chunwang; Ma, Daqing

    2018-01-01

    With the increasing requirements on the power supply quality and reliability of distribution network, voltage and reactive power regulation of substations has become one of the indispensable ways to ensure voltage quality and reactive power balance and to improve the economy and reliability of distribution network. Therefore, it is a general concern of the current power workers and operators that what kind of flexible and effective control method should be used to adjust the on-load tap-changer (OLTC) transformer and shunt compensation capacitor in a substation to achieve reactive power balance in situ, improve voltage pass rate, increase power factor and reduce active power loss. In this paper, based on the traditional nine-zone diagram and combining with the characteristics of substation, a fuzzy variable-center nine-zone diagram control method is proposed and used to make a comprehensive regulation of substation voltage and reactive power. Through the calculation and simulation of the example, this method is proved to have satisfactorily reconciled the contradiction between reactive power and voltage in real-time control and achieved the basic goal of real-time control of the substation, providing a reference value to the practical application of the substation real-time control method.

  20. The reactivity of natural phenols

    Energy Technology Data Exchange (ETDEWEB)

    Denisov, Evgenii T; Denisova, Taisa G [Institute of Problems of Chemical Physics, Russian Academy of Sciences, Chernogolovka, Moscow Region (Russian Federation)

    2009-11-30

    This review surveys physicochemical data of natural phenols published in recent years. The structures of some compounds of this class are given. A complete set of the dissociation energies of the O-H bonds for 71 natural phenols is presented. Kinetic characteristics of the reactions of peroxyl, alkyl and thiyl radicals with natural phenols, exchange reactions of phenoxyl radicals with phenols and reactions of phenoxyl radicals with lipids, hydroperoxides, cysteine and ascorbic acid are compiled and described systematically. The reactivity of phenols in radical reactions and the factors that determine the reactivity (the enthalpy of reaction, triplet repulsion, the electronegativities of atoms at the reaction centre, the presence of pi-electrons adjacent to the reaction centre, the radii of atoms at the reaction centre, steric hindrance, the force constants of the reacting bonds) are discussed. An important role of hydrogen bonding between surrounding molecules and the OH groups of natural phenols in decreasing their reactivities is noted.

  1. Potential impact of reactive vaccination in controlling cholera outbreaks: an exploratory analysis using a Zimbabwean experience.

    Science.gov (United States)

    Kim, Sun-Young; Choi, Yeongchull; Mason, Peter R; Rusakaniko, Simbarashe; Goldie, Sue J

    2011-09-05

    To contain ongoing cholera outbreaks, the World Health Organization has suggested that reactive vaccination should be considered in addition to its previous control measures. To explore the potential impact of a hypothetical reactive oral cholera vaccination using the example of the recent large-scale cholera outbreak in Zimbabwe. This was a retrospective cost-effectiveness analysis calculating the health and economic burden of the cholera outbreak in Zimbabwe with and without reactive vaccination. The primary outcome measure was incremental cost per disability-adjusted life year (DALY) averted. Under the base-case assumptions (assuming 50% coverage among individuals aged ≥2 years), reactive vaccination could have averted 1 320 deaths and 23 650 DALYs. Considering herd immunity, the corresponding values would have been 2 920 deaths and 52 360 DALYs averted. The total vaccination costs would have been ~$74 million and ~$21 million, respectively, with per-dose vaccine price of US$5 and $1. The incremental costs per DALY averted of reactive vaccination were $2 770 and $370, respectively, for vaccine price set at $5 and $1. Assuming herd immunity, the corresponding cost was $980 with vaccine price of $5, and the programme was cost-saving with a vaccine price of $1. Results were most sensitive to case-fatality rate, per-dose vaccine price, and the size of the outbreak. Reactive vaccination has the potential to be a cost-effective measure to contain cholera outbreaks in countries at high risk. However, the feasibility of implementation should be further evaluated, and caution is warranted in extrapolating the findings to different settings in the absence of other in-depth studies.

  2. Determinants of physician empathy during medical education: hypothetical conclusions from an exploratory qualitative survey of practicing physicians

    Science.gov (United States)

    2014-01-01

    Background Empathy is an outcome-relevant physician characteristic and thus a crucial component of high-quality communication in health care. However, the factors that promote and inhibit the development of empathy during medical education have not been extensively researched. Also, currently there is no explicit research on the perspective of practicing physicians on the subject. Therefore the aim of our study was to explore physicians’ views of the positive and negative influences on the development of empathy during their medical education, as well as in their everyday work as physicians. Method We administered a written Qualitative Short Survey to 63 physicians in seven specialties. They were able to respond anonymously. Our open-ended question was: “What educational content in the course of your studies and/or your specialist training had a positive or negative effect on your empathy?” We analyzed the data using thematic content analysis following Mayring’s approach. Results Forty-two physicians took part in our survey. All together, they mentioned 68 specific factors (37 positive, 29 negative, 2 neutral) from which six themes emerged: 1. In general, medical education does not promote the development of empathy. 2. Recognizing the psycho-social dimensions of care fosters empathy. 3. Interactions with patients in medical practice promote empathy. 4. Physicians’ active self-development through reflective practice helps the development of empathy. 5. Interactions with colleagues can both promote and inhibit empathy through their role modeling of empathic and non-empathic behavior. 6. Stress, time pressure, and adverse working conditions are detrimental to empathy development. Conclusions Our results provide an overview of what might influence the development of clinical empathy, as well as hypothetical conclusions about how to promote it. Reflective practice seems to be lacking in current medical curricula and could be incorporated. Raising physicians

  3. Treatment of dyeing wastewater including reactive dyes (Reactive ...

    African Journals Online (AJOL)

    Fungal growth was not observed at pH 2. Maximum fungal decolourisation ocurred at pH 3 for anionic reactive dyes (RR, RBB, RB) and pH 6 for cationic MB dye. The fungal dye bioremoval was associated with the surface charge of the fungus due to electrostatic interactions. Growing R. arrhizus strain decolourised 100% of ...

  4. Memory reactivation improves visual perception.

    Science.gov (United States)

    Amar-Halpert, Rotem; Laor-Maayany, Rony; Nemni, Shlomi; Rosenblatt, Jonathan D; Censor, Nitzan

    2017-10-01

    Human perception thresholds can improve through learning. Here we report findings challenging the fundamental 'practice makes perfect' basis of procedural learning theory, showing that brief reactivations of encoded visual memories are sufficient to improve perceptual discrimination thresholds. Learning was comparable to standard practice-induced learning and was not due to short training per se, nor to an epiphenomenon of primed retrieval enhancement. The results demonstrate that basic perceptual functions can be substantially improved by memory reactivation, supporting a new account of perceptual learning dynamics.

  5. Initiation devices, initiation systems including initiation devices and related methods

    Energy Technology Data Exchange (ETDEWEB)

    Daniels, Michael A.; Condit, Reston A.; Rasmussen, Nikki; Wallace, Ronald S.

    2018-04-10

    Initiation devices may include at least one substrate, an initiation element positioned on a first side of the at least one substrate, and a spark gap electrically coupled to the initiation element and positioned on a second side of the at least one substrate. Initiation devices may include a plurality of substrates where at least one substrate of the plurality of substrates is electrically connected to at least one adjacent substrate of the plurality of substrates with at least one via extending through the at least one substrate. Initiation systems may include such initiation devices. Methods of igniting energetic materials include passing a current through a spark gap formed on at least one substrate of the initiation device, passing the current through at least one via formed through the at least one substrate, and passing the current through an explosive bridge wire of the initiation device.

  6. Studies on the effects of the hypothetic accidents in HTR reactors. (phase 1). HSK 1. Pt. 1

    International Nuclear Information System (INIS)

    Gabriel, H.W.; Redondo, J.A.

    1977-09-01

    The report is an attempt to outline the possibilities of a quantitative, i.e. objective safety assessment. The basic problem here are the controversial opinions an the term of 'risk'. As long as there is no technically and legally acceptable compromise between the opinion 'risk equals extent of damage' and the probabilistic concept, systems in development must follow both approaches. Using the HTR-1160 as an example, studies on the determination of the maximum possible extent of damage in nuclear power plants have been carried out with a special view to determining the rate of the course of extreme accident combinations. Knowledge on this point helps to quantify the chances to prevent the accident itself as well as the chances to protect the population. One basic assumption is that there are no active safety measures to ameliorate the course of the accident (hypothetic accident chains). Consequence analysis is based on nothing but analytically and experimentally validable data, i.e. 'natural law data' on the failure of passive reactor components. Present findings show that HTR reactors can be designed in such manner that accidents with vicinity dose development velocities above 100 rem/5 h are practically impossible. The time history of dose development velocities in the vicinity can be superposed by the course of possible administrative measures. Risk values can then be assessed with sufficient accuracy. (orig./HP) [de

  7. When Do Friends Prevent Friends from Hooking Up Intoxicated? An Examination of Sex Differences and Hypothetical Intoxication in Peer Interventions.

    Science.gov (United States)

    Savage, Matthew W; Menegatos, Lisa; Roberto, Anthony J

    2017-08-01

    Despite the risks involved when mixing alcohol with casual sexual activity, the majority of college students engage in hookups, and the majority of those hookups involve alcohol. This study focused on the protective role college students' peers can play and the situational factors that might influence their willingness to intervene when a close friend is about to hook up intoxicated. Drawing on the theory of planned behavior (TPB), this study investigated differences in students' (N = 1270) attitudes, norms, perceived behavioral control, and intentions to persuade a close friend not to engage in a hypothetical drunken hookup using a 2 (friend sex) × 2 (participant sex) × 2 (sober/intoxicated) factorial design. Results indicated significant differences in the TPB variables. Participants intended to intervene with female friends, but not male friends, and women were more likely to intervene than men. Participants in the sober condition had stronger intentions to intervene than those in the intoxicated condition, but this effect was driven by increases in men's intentions when sober. Implications for theory and prevention programming are discussed.

  8. Predicting hypothetical willingness to participate (WTP) in a future phase III HIV vaccine trial among high-risk adolescents.

    Science.gov (United States)

    Giocos, Georgina; Kagee, Ashraf; Swartz, Leslie

    2008-11-01

    The present study sought to determine whether the Theory of Planned Behaviour predicted stated hypothetical willingness to participate (WTP) in future Phase III HIV vaccine trials among South African adolescents. Hierarchical logistic regression analyses showed that The Theory of Planned Behaviour (TPB) significantly predicted WTP. Of all the predictors, Subjective norms significantly predicted WTP (OR = 1.19, 95% C.I. = 1.06-1.34). A stepwise logistic regression analysis revealed that Subjective Norms (OR = 1.19, 95% C.I. = 1.07-1.34) and Attitude towards participation in an HIV vaccine trial (OR = 1.32, 95% C.I. = 1.00-1.74) were significant predictors of WTP. The addition of Knowledge of HIV vaccines and HIV vaccine trials, Perceived self-risk of HIV infection, Health-promoting behaviours and Attitudes towards HIV/AIDS yielded non-significant results. These findings provide support for the Theory of Reasoned Action (TRA) and suggest that psychosocial factors may play an important role in WTP in Phase III HIV vaccine trials among adolescents.

  9. Modelling the long-term consequences of a hypothetical dispersal of radioactivity in an urban area including remediation alternatives

    International Nuclear Information System (INIS)

    Thiessen, K.M.; Andersson, K.G.; Batandjieva, B.; Cheng, J.-J.; Hwang, W.T.; Kaiser, J.C.; Kamboj, S.; Steiner, M.; Tomas, J.; Trifunovic, D.; Yu, C.

    2009-01-01

    The Urban Remediation Working Group of the International Atomic Energy Agency's EMRAS (Environmental Modelling for Radiation Safety) program was organized to address issues of remediation assessment modelling for urban areas contaminated with dispersed radionuclides. The present paper describes the second of two modelling exercises. This exercise was based on a hypothetical dispersal of radioactivity in an urban area from a radiological dispersal device, with reference surface contamination at selected sites used as the primary input information. Modelling endpoints for the exercise included radionuclide concentrations and external dose rates at specified locations, contributions to the dose rates from individual surfaces, and annual and cumulative external doses to specified reference individuals. Model predictions were performed for a 'no action' situation (with no remedial measures) and for selected countermeasures. The exercise provided an opportunity for comparison of three modelling approaches, as well as a comparison of the predicted effectiveness of various countermeasures in terms of their short-term and long-term effects on predicted doses to humans.

  10. Heat propagation in and around the deep repository. Thermal calculations applied to three hypothetical sites: Aberg, Beberg and Ceberg

    International Nuclear Information System (INIS)

    Ageskog, L.; Jansson, Patrik

    1999-01-01

    The purpose of the present study is to demonstrate the modelling of the thermal process in and around the deep repository for spent fuel. The model was developed in the general finite element program ANSYS and applied to the three hypothetical sites Aberg, Beberg and Ceberg included in the SR 97 analyse system. The canister emplacement in the repository was analysed based on certain criteria regarding the temperature on the canister surface. This was done with consideration to natural deviations in various thermal parameters as well as to the risk of a gap opening up between the canister surface and the bentonite buffer. The consequence of the latter was analysed separately as part of the study. The heat load in the model was applied stepwise, following an assumed time schedule for the actual deposition work. The calculations were extended to 1,000 years after the commencement of the deposition work. The outcome of the calculation is presented as coloured prints of isotherms in and around the repository at certain time intervals

  11. What would you say? Genetic counseling graduate students' and counselors' hypothetical responses to patient requested self-disclosure.

    Science.gov (United States)

    Redlinger-Grosse, Krista; Veach, Patricia McCarthy; MacFarlane, Ian M

    2013-08-01

    Genetic counselor self-disclosure is a complex behavior that lacks extensive characterization. In particular, data are limited about genetic counselors' responses when patients ask them to self-disclose. Accordingly, this study investigated genetic counseling students' (n = 114) and practicing genetic counselors' (n = 123) responses to two hypothetical scenarios in which a female prenatal patient requests self-disclosure. Scenarios were identical except for a final patient question: "Have you ever had an amniocentesis?" or "What would you do if you were me?" Imagining themselves as the counselor, participants wrote a response for each scenario and then explained their response. Differences in disclosure frequency for students vs. counselors and disclosure question were assessed, and themes in participant responses and explanations were extracted via content and thematic analysis methods. Chi-square analyses indicated no significant differences in frequency of student versus counselor disclosure. Self-disclosure was significantly higher for, "Have you ever had an amniocentesis?" (78.5 %) than for, "What would you do if you were me?" (53.2 %) (p self-disclosures included personal, professional, and mixed disclosures. Prevalent explanations for disclosure and non-disclosure responses included: remain patient focused and support/empower the patient. Additional findings, practice and training implications, and research recommendations are presented.

  12. PBDOWN - a computer code for simulating core material discharge and thermal to mechanical energy conversion in LMFBR hypothetical accidents

    International Nuclear Information System (INIS)

    Royl, P.

    1981-01-01

    PBDOWN is a computer code that simulates the blowdown of confined boiling materials ('pools') into a colder upper coolant plenum as time dependent ejection and expansion with consideration of a few selected exchange processes. Its application is restricted to situations resulting from hypothetical loss of flow (LOF) accidents in LMFBR's, where enough voiding has occured, that in core sodium vapor pressures become negligible. PBDOWN considers one working fluid for the discharge process (either fuel or steel) and a maximum of two working fluids (either fuel and sodium or steel and sodium) for the expansion process in the upper coolant plenum. Entrainment of sodium at the accelerated bubble liquid interfaces is mechanistically calculated by a Taylor instability entrainment model. Simulation of a hemispherical expansion form together with this mechanistic entrainment model gives a new integrated calculation of the time dependent sodium mass in the bubble. The paper summarizes the basic equations and assumptions of this computer model. Sample results compare different heat transfer and Na entrainment models during steel and fuel driven discharge processes. Mechanistic sodium entrainment simulation for SNR-type reactors coupled with a realistic heat transfer model is shown to reduce the integral mechanical work potential by a factor of 1.3 to 2.0 over the isentropic energy of the discharge working fluids. (orig.)

  13. Experimental analysis of the behaviour of iodine in the event of hypothetical accidents. Final report. Pt. 1

    International Nuclear Information System (INIS)

    Richter, F.; Rippel, R.; Proebstle, G.; Fernholz, O.

    1986-01-01

    Experiments have been performed simulating hypothetical core-melt accidents in order to determine droplet-bound transport of radio-nuclides. Different measurement methods have been applied to evaluate steam moisture and droplet size distribution, the carry-over factor of a tracer substance, and, to some extent, droplet velocity, under atmospheric sump water boiling conditions. Part flow analysis yields carry-over factor values on the order of magnitude 10 -5 . Thus it is smaller than would be expected from visual measurements of steam moisture in the main flow, a result which is due to droplet velocity characteristics which limit the carry-over through openings. Results distinctly show that steam moisture (10 -3 up to 7x10 -5 , depending on the distance from the sump) and the droplet size (4-57 μm) can only be used as a source term. In order to evaluate the quantity released from a leakage, a supplementary investigation of droplet carry-over mechanisms will be required. (orig.) [de

  14. A Comparative Assessment of Life-Cycle Greenhouse Gas Emissions from Hypothetical Electric Airport Transportation Services in Thailand

    Science.gov (United States)

    Koiwanit, J.

    2018-05-01

    Global warming is an increase of average temperature in the atmosphere, which causes adverse effects on the environment. Carbon dioxide (CO2) from transportation sector is one of the main contributors of the overall greenhouse gases (GHG). To cope with this issue, electric car services are increasingly seen as popular alternative modes of green transportation especially for urban cities as it is more flexible, more environmentally-friendly, and less expensive than the use of conventional vehicles. The study analyses and compare the hypothetical electric car systems from airport transportation services. Center of Environmental Science of Leiden University (CML) 2001, the Life Cycle Impact Assessment (LCIA) method, is applied to convert life cycle inventory data into environmental impacts. The observed results showed that the electric shuttle bus had the highest impact in global warming potential (GWP) compared to other transportation types. Alternatively, this Life Cycle Assessment (LCA) study that evaluated different transportations provided important information for decision makers on quantifying the differences between each scenario.

  15. Assessment of radiological impact due to a hypothetical core disruptive accident for PFBR using an advanced atmospheric dispersion system

    International Nuclear Information System (INIS)

    Srinivas, C.V.; Venkatesan, R.; Natarajan, A.

    2004-01-01

    Radiological impact due to air borne effluent dispersion from a hypothetical Core Disruptive Accident (CDA) scenario for Prototype Fast Breeder Reactor (PFBR) at Kalpakkam coastal site is estimated using an advanced system consisting of a 3-d meso-scale atmospheric model and a random walk particle dispersion model. A simulation of dispersion for CDA carried out for a typical summer day on 24th May 2003 predicted development of land-sea breeze circulation and Thermal Internal Boundary Layer (TIBL) at Kalpakkam site, which have been confirmed by observations. Analysis of dose distribution corresponding to predicted atmospheric conditions shows maximum dose from stack releases beyond the site boundary at about 4 km during TIBL fumigation and stable conditions respectively. A multi mode spatial concentration distribution has been noticed with diurnal meandering of wind under land sea breeze circulation. Over a meso-scale range of 25 km, turning of plume under sea breeze and maximum concentration along plume centerline at distances of 3 to 10 km have been noticed. The study has enabled to simulate the more complex meteorological situation that is actually present at the site. (author)

  16. Identification of functional candidates amongst hypothetical proteins of Mycobacterium leprae Br4923, a causative agent of leprosy.

    Science.gov (United States)

    Naqvi, Ahmad Abu Turab; Ahmad, Faizan; Hassan, Md Imtaiyaz

    2015-01-01

    Mycobacterium leprae is an intracellular obligate parasite that causes leprosy in humans, and it leads to the destruction of peripheral nerves and skin deformation. Here, we report an extensive analysis of the hypothetical proteins (HPs) from M. leprae strain Br4923, assigning their functions to better understand the mechanism of pathogenesis and to search for potential therapeutic interventions. The genome of M. leprae encodes 1604 proteins, of which the functions of 632 are not known (HPs). In this paper, we predicted the probable functions of 312 HPs. First, we classified all HPs into families and subfamilies on the basis of sequence similarity, followed by domain assignment, which provides many clues for their possible function. However, the functions of 320 proteins were not predicted because of low sequence similarity with proteins of known function. Annotated HPs were categorized into enzymes, binding proteins, transporters, and proteins involved in cellular processes. We found several novel proteins whose functions were unknown for M. leprae. These proteins have a requisite association with bacterial virulence and pathogenicity. Finally, our sequence-based analysis will be helpful for further validation and the search for potential drug targets while developing effective drugs to cure leprosy.

  17. Point Source contamination approach for hydrological risk assessment of a major hypothetical accident from second research reactor at Inshas site

    International Nuclear Information System (INIS)

    Sadek, M.A.; Tawfik, F.S.

    2002-01-01

    The point source contamination mechanism and the deterministic conservative approach have been implemented to demonstrate the hazards of hydrological pollution due to a major hypothetical accident in the second research reactor at Inshas. The radioactive inventory is assumed to be dissolved in 75% of the cooling water (25% are lost) and comes directly into contact with ground water and moved down gradient. Five radioisotopes(I-129, Sr-90, Ru-106, Cs-134 and Cs-137) of the entire inventory are found to be highly durable and represent vulnerability in the environment. Their downstream spread indices; C max : maximum concentration at the focus of the moving ellipse, delta: pollution duration at different distances, A:polluted area at different distances and X min : safety distance from the reactor, were calculated based on analytical solutions of the convection-dispersion partial differential equation for absorbable and decaying species. The largest downstream contamination range was found for Sr-90 and Ru-106 but still no potential. The geochemical and hydrological parameters of the water bearing formations play a great role in buffering and limiting the radiation effects. These reduce the retention time of the radioisotopes several order of magnitudes in the polluted distances. Sensitivity analysis of the computed pollution ranges shows low sensitivity to possible potential for variations activity of nuclide inventory, dispersivity and saturated thickness and high sensitivity for possible variations in groundwater velocity and retention factors

  18. Collective radiation doses following a hypothetical, very severe accident to an irradiated fuel transport flask containing AGR fuel

    International Nuclear Information System (INIS)

    Corbett, J.O.

    1985-05-01

    Studies of the consequences of very severe, although unlikely, accidents to irradiated fuel transport flasks are made in order to evaluate risks. If an irradiated fuel transport flask carrying AGR fuel were damaged in a hypothetical accident involving a severe impact followed by a prolonged fire, a small proportion of caesium and other fission products might be released to the atmosphere from the gap inventory of broken fuel pins. The consequent radiation dose to the public would arise predominantly by direct irradiation from ground deposits and the ingestion of slightly contaminated foodstuffs. Although these collective doses must generally be estimated with the aid of computer codes, it is shown here that the worst case, when a high proportion of the radioactivity is deposited in a densely population area, can be assessed approximately by a much simpler method, an approach which is of great value in explaining the calculation in a manner that can be readily understood. A comparison is made between the simple approach and equivalent results from the NECTAR code, the worst case is compared with an ensemble average over all weather conditions, and the relative contributions of the two main routes to collective dose are discussed. (author)

  19. Preparation, crystallization and preliminary X-ray characterization of a conserved hypothetical protein XC1692 from Xanthomonas campestris

    International Nuclear Information System (INIS)

    Chin, Ko-Hsin; Huang, Zhao-Wei; Wei, Kun-Chou; Chou, Chia-Cheng; Lee, Cheng-Chung; Shr, Hui-Lin; Gao, Fei Philip; Lyu, Ping-Chiang; Wang, Andrew H.-J.; Chou, Shan-Ho

    2005-01-01

    A conserved hypothetical protein XC1692 from X. campestris pv. campestris has been overexpressed in E. coli. The purified recombinant protein crystallized in a variety of forms and diffracted to a resolution of at least 1.45 Å. Xanthomonas campestris pv. campestris strain 17 is a Gram-negative yellow-pigmented pathogenic bacterium that causes black rot, one of the major worldwide diseases of cruciferous crops. Its genome contains approximately 4500 genes, one third of which have no known structure and/or function yet are highly conserved among several different bacterial genuses. One of these gene products is XC1692 protein, containing 141 amino acids. It was overexpressed in Escherichia coli, purified and crystallized in a variety of forms using the hanging-drop vapour-diffusion method. The crystals diffract to at least 1.45 Å resolution. They are hexagonal and belong to space group P6 3 , with unit-cell parameters a = b = 56.9, c = 71.0 Å. They contain one molecule per asymmetric unit

  20. Altruistic reasoning in adolescent-parent dyads considering participation in a hypothetical sexual health clinical trial for adolescents.

    Science.gov (United States)

    Chávez, Noé Rubén; Williams, Camille Y; Ipp, Lisa S; Catallozzi, Marina; Rosenthal, Susan L; Breitkopf, Carmen Radecki

    2016-04-01

    Altruism is a well-established reason underlying research participation. Less is known about altruism in adolescent-parent decision-making about clinical trials enrolling healthy adolescents. This qualitative investigation focused on identifying spontaneous statements of altruism within adolescent-parent (dyadic) discussions of participation in a hypothetical phase I clinical trial related to adolescent sexual health. Content analysis revealed several response patterns to each other's altruistic reasoning. Across 70 adolescent-parent dyads in which adolescents were 14-17 years of age and 91% of their parents were mothers, a majority (61%) of dyadic discussions included a statement reflecting altruism. Parents responded to adolescents' statements of altruism more frequently than adolescents responded to parents' statements. Responses included: expresses concern, reiterates altruistic reasoning, agrees with altruistic reasoning, and adds to/expands altruistic reasoning. Since an altruistic perspective was often balanced with concerns about risk or study procedures, researchers cannot assume that altruism will directly lead to study participation. Optimizing the informed consent process for early phase clinical trials involving healthy adolescents may include supporting parents to have conversations with their adolescents which will enhance their capacity to consider all aspects of trial participation.

  1. Assessment of Radiological and Economic Consequences of a Hypothetical Accident for ETRR-2, Egypt Utilizing COSYMA Code

    International Nuclear Information System (INIS)

    Tawfik, F.S.; Abdel-Aal, M.M.

    2008-01-01

    A comprehensive probabilistic study of an accident consequence assessment (ACA) for loss of coolant accident (LOCA) has accomplished to the second research reactor ETRR-2, located at Inshas Nuclear Research Center, Cairo, Egypt. PC-COSYMA, developed with the support of European Commission, has adopted to assess the radiological and economic consequences of a proposed accident. The consequences of the accident evaluated in case of early and late effects. The effective doses and doses in different organs carried out with and without countermeasures. The force mentioned calculations were required the following studies: the core inventory due to the hypothetical accident, the physical parameters of the source term, the hourly basis meteorological parameters for one complete year, and the population distribution around the plant. The hourly stability conditions and height of atmospheric boundary layers (ABL) of the concerned site were calculated. The results showed that, the nuclides that have short half-lives (few days) give the highest air and ground concentrations after the accident than the others. The area around the reactor requires the early and late countermeasures action after the accident especially in the downwind sectors. Economically, the costs of emergency plan are effectively high in case of applying countermeasures but countermeasures reduce the risk effects

  2. Possibilities of hydrogen removal. Phase 2: Limitation of hydrogen effects in hypothetical severe accidents in PWR reactors

    International Nuclear Information System (INIS)

    Langer, G.; Koehling, A.; Nikodem, H.

    1984-01-01

    In the event of hypothetical severe accidents in light-water reactors, considerable amounts of hydrogen may be produced and released into the containment. Combustion of the hydrogen may jeopardize the integrity of the containment. The study reported here aimed to identify methods to mitigate the hydrogen problem. These methods should either prevent hydrogen combustion, or limit its effects. The following methods have been investigated: pre-inerting; chemical oxygen absorption; removal of oxygen by combustion; post-inerting with N 2 , CO 2 , or halon; aqueous foam; water fog; deliberate ignition; containment purging; and containment venting. The present state of the art in both nuclear and non-nuclear facilities, has been identified. The assessment of the methods was based on accident scenarios assuming significant release of hydrogen and the spectrum of requirements derived from these scenarios was used to determine the advantages and drawbacks of the various methods, assuming their application in a pressurized water reactor of German design. (orig./RW) [de

  3. Hypothetical core disruptive accident analysis of a 2000 MWsub(e) liquid metal cooled fast breeder reactor

    International Nuclear Information System (INIS)

    Struwe, D.

    1977-12-01

    A structural phase diagram for hypothetical core disruptive accidents (HCDA) has been developed based on a variety of analyses for different LMFBR's. The intention was to identify the strategic phases of HCDA's important with regard to safety aspects of the plant. These phases are investigated in detail for a 2,000 MWsub(e) LMFBR (SNR-2,000). Characteristic data of SNR-2,000 are discussed concerning their influence on safety analysis. Reasons for the choice of model parameters for special phenomena as fuel coolant interaction, fuel pin failure mechanisms and sodium voiding are given. The results of calculations with CAPRI-2, HOPE and KADIS are analyzed for possibilities to enter energetic core disassembly with consequences, making power values below 2,000 MWsub(e) necessary. Investigation of these results shows that the expected consequences do not lead to design requirements, restricting the magnitude of the electrical power output of LMFBR's to values below 2,000 MWsub(e). Therefore, consequences of HCDA's are principal not expected to limit the feasibility of conventional core design of this order of magnitude. (orig.) [de

  4. Hypothetical "anatomy" of Brugada phenomenon: "Long QT sine Long QT" syndrome implicating morphologically undefined specific "Brugada's myocells".

    Science.gov (United States)

    Stirbys, Petras

    2017-01-01

    The Brugada syndrome (BrS) is associated with increased risk of ventricular arrhythmias and sudden cardiac death. It generates genetically mediated arrhythmias posing a true pathophysiological challenge. In search of the similarities between BrS and long QT syndrome some novel insights are suggested. In patients with BrS the duration of QT interval is usually normal. Some investigators have found prolonged QT interval in the syndrome's natural course or the duration of QT segment have been extended by provocative tests unmasking BrS. Thus, BrS might be characterized as "long QT sine long QT" syndrome. The existence of two functional types of myocites is suspected. Regarding structure and function the majority of ventricular myocardium is probably mostly healthy. The rest of myocardium (preferably the subepicardium of right ventricular outflow tract) due to its genotypic peculiarities demonstrates no negative influence on ventricular performance until early adulthood is reached and/or other unstable preconditions are fulfilled (nocturnal time, fever, specific drugs, etc.). Based on published findings of positive outcomes, following the epicardial ablation of the right ventricular outflow tract region, a new hypothetical concept suggesting the presence of specific, genetically affected "Brugada's myocells" is proposed. These cells as a suitable arrhythmogenic substrate reside intramurally within the subepicardial region of the outflow tract of right ventricle. In the daytime these cells likely are dormant but at rest their nocturnal proarrhythmic behavior is activated occasionally. Presumptions regarding the pathophysiology of BrS might be the focus of further discussion.

  5. Hypothetical operation model for the multi-bed system of the Tritium plant based on the scheduling approach

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae-Uk, E-mail: eslee@dongguk.edu [Department of Chemical Engineering, Pohang University of Science and Technology, San 31, Hyoja-Dong, Pohang 790-784 (Korea, Republic of); Chang, Min Ho; Yun, Sei-Hun [National Fusion Research Institute, 169-148-gil Kwahak-ro, Yusong-gu, Daejon 34133 (Korea, Republic of); Lee, Euy Soo [Department of Chemical & Biochemical Engineering, Dongguk University, Seoul 100-715 (Korea, Republic of); Lee, In-Beum [Department of Chemical Engineering and Graduate School of Engineering Mastership, Pohang University of Science and Technology, San 31, Hyoja-Dong, Pohang 790-784 (Korea, Republic of); Lee, Kun-Hong [Department of Chemical Engineering, Pohang University of Science and Technology, San 31, Hyoja-Dong, Pohang 790-784 (Korea, Republic of)

    2016-11-01

    Highlights: • We introduce a mathematical model for the multi-bed storage system in the tritium plant. • We obtain details of operation by solving the model. • The model assesses diverse operation scenarios with respect to risk. - Abstract: In this paper, we describe our hypothetical operation model (HOM) for the multi-bed system of the storage and delivery system (SDS) of the ITER tritium plant. The multi-bed system consists of multiple getter beds (i.e., for batch operation) and buffer vessels (i.e., for continuous operation). Our newly developed HOM is formulated as a mixed-integer linear programming (MILP) model and has been extensively investigated to optimize chemical and petrochemical production planning and scheduling. Our model determines the timing, duration, and size of tasks corresponding to each set of equipment. Further, inventory levels for each set of equipment are calculated. Our proposed model considers the operation of one cycle of one set of getter beds and is implemented and assessed as a case study problem.

  6. Real and hypothetical endowment effects when exchanging lottery tickets: Is regret a better explanation than loss aversion?

    Science.gov (United States)

    Kogler, Christoph; Kühberger, Anton; Gilhofer, Rainer

    2013-08-01

    The endowment effect is the finding that possession of an item adds to its value. We introduce a new procedure for testing this effect: participants are divided into two groups. Possession group participants inspect a numbered lottery ticket and know it is theirs, while inspection group participants only inspect a lottery ticket without being endowed with it. Subsequently participants choose between playing the lottery with this (possessed or inspected) ticket, or exchanging it for another one. Our procedure tests for the effect of endowment while controlling for the influence of transaction costs as well as for inspection effects and the influence of bargaining roles (buyer vs. seller), which often afflict experimentation with the endowment effect. In a real setting, tickets in possession were valued significantly higher than inspected tickets. Contrary to some findings in the literature participants also correctly predicted these valuation differences in a hypothetical situation, both for themselves as well as for others. Furthermore, our results suggest that regret rather than loss aversion may be the source of the endowment effect in an experimental setting using lottery tickets. Applying our procedure to a setting employing riskless objects in form of mugs revealed rather ambiguous results, thus emphasizing that the role of regret might be less prominent in non-lottery settings.

  7. Results of calculations of external gamma radiation exposure rates from local fallout and the related radionuclide compositions of two hypothetical 1-MT nuclear bursts. Final report

    International Nuclear Information System (INIS)

    Hicks, H.

    1984-12-01

    This report presents data on calculated gamma radiation exposure rates and local surface deposition of related radionuclides resulting from two hypothetical 1-Mt nuclear bursts. Calculations are made of the debris from two types of bombs: one containing 235 U as a fissionable material (designated oralloy), the other containing 238 U (designated tuballoy). 4 references

  8. Attributions of Responsibility in a Child Sexual Abuse (CSA) Vignette among Respondents with CSA Histories: The Role of Abuse Similarity to a Hypothetical Victim

    Science.gov (United States)

    Harding, Hilary G.; Zinzow, Heidi M.; Burns, Erin E.; Jackson, Joan L.

    2010-01-01

    Previous research suggests that similarity to a victim may influence attributions of responsibility in hypothetical child sexual abuse scenarios. One aspect of similarity receiving mixed support in the literature is respondent child sexual abuse history. Using a sample of 1,345 college women, the present study examined child sexual abuse history,…

  9. Can You Tell Me Something about Yourself?: Self-Presentation in Children and Adolescents with High Functioning Autism Spectrum Disorder in Hypothetical and Real Life Situations

    Science.gov (United States)

    Scheeren, Anke M.; Begeer, Sander; Banerjee, Robin; Terwogt, Mark Meerum; Koot, Hans M.

    2010-01-01

    The self-presentation skills of children and adolescents with high-functioning autistic spectrum disorder (HFASD) and typically developing (TD) controls were compared, in response to both hypothetical and real life situations. In both situations, 26 HFASD and 26 TD participants were prompted to describe themselves twice, first in a baseline…

  10. Early cost-utility analysis of general and cerebrospinal fluid-specific Alzheimer's disease biomarkers for hypothetical disease-modifying treatment decision in mild cognitive impairment

    NARCIS (Netherlands)

    Handels, Ron L. H.; Joore, Manuela A.; Tran-Duy, An; Wimo, Anders; Wolfs, Claire A. G.; Verhey, Frans R. J.; Severens, Johan L.

    Introduction: The study aimed to determine the room for improvement of a perfect cerebrospinal fluid (CSF) biomarker and the societal incremental net monetary benefit of CSF in subjects with mild cognitive impairment (MCI) assuming a hypothetical disease-modifying Alzheimer's disease (AD) treatment.

  11. Computer simulations of a 1/5-scale experiment of a Mark I boiler water reactor pressure-suppression system under hypothetical LOCA conditions

    International Nuclear Information System (INIS)

    Edwards, L.L.

    1978-01-01

    The CHAMP computer code was employed to simulate a plane-geometry cross section of a Mark I boiling water reactor toroidal pressure suppression system air discharge experiment under hypothetical loss-of-coolant accident conditions. The experiments were performed at the Lawrence Livermore Laboratory on a 1 / 5 -scale model of the Peach Bottom Nuclear Power Plant

  12. Do Children Do What They Say? Responses to Hypothetical and Real-Life Social Problems in Children with Mild Intellectual Disabilities and Behaviour Problems

    Science.gov (United States)

    van Nieuwenhuijzen, M.; Bijman, E. R.; Lamberix, I. C. W.; Wijnroks, L.; de Castro, B. Orobio; Vermeer, A.; Matthys, W.

    2005-01-01

    Abstract: Background Most research on children's social problem-solving skills is based on responses to hypothetical vignettes. Just how these responses relate to actual behaviour in real-life social situations is, however, unclear, particularly for children with mild intellectual disabilities (MID). Method: In the present study, the spontaneous…

  13. Do children do what they say? Responses to hypothetical and real-life social problems in children with mild intellectual disabilities and behaviour problems

    NARCIS (Netherlands)

    van Nieuwenhuijzen, M; Bijman, ER; Lamberix, ICW; Wijnroks, L; de Castro, BO; Vermeer, A; Matthys, W

    Background Most research on children's social problem-solving skills is based on responses to hypothetical vignettes. Just how these responses relate to actual behaviour in real-life social situations is, however, unclear, particularly for children with mild intellectual disabilities (MID). Method

  14. Homogenous and heterogenous advanced oxidation of two commercial reactive dyes.

    Science.gov (United States)

    Balcioglu, I A; Arslan, I; Sacan, M T

    2001-07-01

    Two commercial reactive dyes, the azo dye Reactive Black 5 and the copper phythalocyanine dye Reactive Blue 21, have been treated at a concentration of 75 mg l(-1) by titanium dioxide mediated photocatalytic (TiO2/UV), dark and UV-light assisted Fenton (Fe2+/H2O2) and Fenton-like (Fe3+/H2O2) processes in acidic medium. For the treatment of Reactive Black 5, all investigated advanced oxidation processes were quite effective in terms of colour, COD as well as TOC removal. Moreover, the relative growth inhibition of the azo dye towards the marine algae Dunaliella tertiolecta that was initially 70%, did not exhibit an increase during the studied advanced oxidation reactions and complete detoxification at the end of the treatment period could be achieved for all investigated treatment processes. However, for Reactive Blue 21, abatement in COD and UV-VIS absorbance values was mainly due to the adsorption of the dye on the photocatalyst surface and/or the coagulative effect of Fe3+/Fe2+ ions. Although only a limited fraction of the copper phythalocyanine dye underwent oxidative degradation, 47% of the total copper in the dye was already released after 1 h photocatalytic treatment.

  15. Hydroxyl radical reactivity with diethylhydroxylamine

    International Nuclear Information System (INIS)

    Gorse, R.A. Jr.; Lii, R.R.; Saunders, B.B.

    1977-01-01

    Diethylhydroxylamine (DEHA) reacts with gas-phase hydroxyl radicals on every third collision, whereas the corresponding reaction in aqueous solution is considerably slower. The high gas-phase reactivity explains the predicted inhibitory effect of DEHA in atmospheric smog processes. Results from the studies in the aqueous phase are helpful in predicting the mechanism of the reaction of DEHA with hydroxyl radicals

  16. Backup passive reactivity shutdown systems

    International Nuclear Information System (INIS)

    Ashurko, Yu.M.; Kuznetsov, L.A.

    1996-01-01

    The paper reviews self-actuated shutdown systems (SASSs) for liquid metal-cooled fast reactors (LMFRs). Principles of operation are described, advantages and drawbacks analyzed, and prospects for application in advanced fast reactors examined. Ways to improve reactor self-protection via reactivity feedback amplification and related problems are discussed. (author). 9 refs, 12 figs

  17. Insertion material for controlling reactivity

    International Nuclear Information System (INIS)

    Baba, Iwao.

    1994-01-01

    Moderators and a group of suspended materials having substantially the same density as the moderator are sealed in a hollow rod vertically inserted to a fuel assembly. Specifically, the group of suspended materials is adapted to have a density changing stepwise from density of the moderator at the exit temperature of the reactor core to that at the inlet temperature of the reactor core. Reactivity is selectively controlled for a portion of high power and a portion of high reactivity by utilizing the density of the moderator and the distribution of the density. That is, if the power distribution is flat, the density of the moderators changes at a constant rate over the vertical direction of the reactor core and the suspended materials stay at a portion of the same density, to form a uniform distribution. Further, upon reactor shutdown, since the liquid temperature of the moderators is lowered and the density is increased, all of beads are collected at the upper portion to remove water at the upper portion of the reactor core of low burnup degree thereby selectively controlling the reactivity at a portion of high power and a portion of high reactivity. (N.H.)

  18. Treating water-reactive wastes

    International Nuclear Information System (INIS)

    Lussiez, G.W.

    1993-01-01

    Some compounds and elements, such as lithium hydride, magnesium, sodium, and calcium react violently with water to generate much heat and produce hydrogen. The hydrogen can ignite or even form an explosive mixture with air. Other metals may react rapidly only if they are finely divided. Some of the waste produced at Los Alamos National Laboratory includes these metals that are contaminated with radioactivity. By far the greatest volume of water-reactive waste is lithium hydride contaminated with depleted uranium. Reactivity of the water-reactive wastes is neutralized with an atmosphere of humid nitrogen, which prevents the formation of an explosive mixture of hydrogen and air. When we adjust the temperature of the nitrogen and the humidifier, the nitrogen can be more or less humid, and the rate of reaction can be adjusted and controlled. Los Alamos has investigated the rates of reaction of lithium hydride as a function of the temperature and humidity, and, as anticipated, they in with in temperature and humidity. Los Alamos will investigate other variables. For example, the nitrogen flow will be optimized to conserve nitrogen and yet keep the reaction rates high. Reaction rates will be determined for various forms of lithium waste, from small chips to powder. Bench work will lead to the design of a skid-mounted process for treating wastes. Other water-reactive wastes will also be investigated

  19. Reactive surfactants in heterophase polymerization

    NARCIS (Netherlands)

    Guyot, A.; Tauer, K.; Asua, J.M.; Es, van J.J.G.S.; Gauthier, C.; Hellgren, A.C.; Sherrington, D.C.; Montoya-Goni, A.; Sjöberg, M.; Sindt, O.; Vidal, F.F.M.; Unzue, M.; Schoonbrood, H.A.S.; Schipper, E.T.W.M.; Lacroix-Desmazes, P.

    1999-01-01

    This paper summarizes the work carried out during 3 years in a Network of the program "Human Capital and Mobility" of the European Union CHRX 93-0159 entitled "Reactive surfactants in heterophase polymerization for high performance polymers". A series of about 25 original papers will be published in

  20. Backup passive reactivity shutdown systems

    Energy Technology Data Exchange (ETDEWEB)

    Ashurko, Yu M; Kuznetsov, L A [Institute of Physics and Power Engineering, Obninsk (Russian Federation)

    1996-12-01

    The paper reviews self-actuated shutdown systems (SASSs) for liquid metal-cooled fast reactors (LMFRs). Principles of operation are described, advantages and drawbacks analyzed, and prospects for application in advanced fast reactors examined. Ways to improve reactor self-protection via reactivity feedback amplification and related problems are discussed. (author). 9 refs, 12 figs.