WorldWideScience

Sample records for hydrochloric acid based

  1. A Concentrated Hydrochloric Acid-based Method for Complete Recovery of DNA from Bone.

    Science.gov (United States)

    Huynen, Leon; Lambert, David M

    2015-11-01

    The successful extraction of DNA from historical or ancient animal bone is important for the analysis of discriminating genetic markers. Methods used currently rely on the digestion of bone with EDTA and proteinase K, followed by purification with phenol/chloroform and silica bed binding. We have developed a simple concentrated hydrochloric acid-based method that precludes the use of phenol/chloroform purification and can lead to a several-fold increase in DNA yield when compared to other commonly used methods. Concentrated hydrochloric acid was shown to dissolve most of the undigested bone and allowed the efficient recovery of DNA fragments <100 bases in length. This method should prove useful for the recovery of DNAs from highly degraded animal bone, such as that found in historical or ancient samples.

  2. Hydrochloric acid recycling from chlorinated hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Sowieja, D. [Sulzer Escher Wyss GmbH, Ravensburg (Germany); Schaub, M. [Sulzer Chemtech Ltd., Winterthur (Switzerland)

    1993-12-31

    Chlorinated hydrocarbons present a major ecological hazard since most of them are only poorly biodegradable. Incineration is an economical process for their destruction, however the usually recovered sodium or calcium chlorides do not present a value and their disposal may even be very costly. Recovery of hydrochloric acid may therefore present an economical solution, mainly were large quantities of highly chlorinated compounds can be processed (author) 6 refs., 4 figs., 1 tab.

  3. Hydrochloric acid for treating metabolic alkalosis.

    Science.gov (United States)

    Korkmaz, A; Yildirim, E; Aras, N; Ercan, F

    1989-09-01

    Six patients with severe metabolic alkalosis were treated with intravenous hydrochloric acid (HCl) infusion. HCl was given through a central venous catheter, at a concentration of 0.1 mEq per ml. At least two of the following criteria were considered for initiation of the therapy: An arterial pH of greater than 7.45, a base excess (BE) of greater than +7 mmol/L, a PaCO2 of greater than 50 mmHg. The HCl amount was calculated using the BE formula, however, two thirds was infused for avoiding excessive acid loading. Patients were monitored by the blood gases, serum electrolytes, hemoglobin, hematocrit, bilirubin determinations and blood smear findings. While a significant decrease was noticed in pH and BE values, moderate changes were detected in PaCO2 due to different ventilatory status of the cases. All laboratory test results remained within normal limits and no complication was encountered. The advantage of the therapy is that less volume is needed for the correction of alkalosis, particularly in the cases requiring fluid restriction. HCl therapy, moreover, is a safe and time-saving method because of having rapid response to the treatment in the critically ill surgical patients.

  4. Extraction of Gold(III) from Hydrochloric Acid Solutions with a PVC-based Polymer Inclusion Membrane (PIM) Containing Cyphos® IL 104

    OpenAIRE

    2015-01-01

    Abstract: Poly(vinyl chloride) (PVC) based polymer inclusion membranes (PIMs), with different concentrations of Cyphos® IL 104 as the membrane extractant/carrier, were studied for their ability to extract Au(III) from hydrochloric acid solutions. Some of the PIMs also contained one of the following plasticizers or modifiers: 2-nitrophenyloctyl ether, dioctylphthalate, 1-dodecanol, 1-tetradecanol, or tri(2-ethylhexyl) phosphate. The best performance, in terms of extraction rate and amount of A...

  5. Interactions of some Schiff base compounds with mild steel surface in hydrochloric acid solution

    Energy Technology Data Exchange (ETDEWEB)

    Bayol, Emel [Department of Chemistry, Faculty of Science and Art, Nigde University, Nigde 51200 (Turkey); Guerten, Tijen [Department of Chemistry, Faculty of Science and Art, Cukurova University, Adana 01330 (Turkey); Guerten, A. Ali [Department of Chemistry, Faculty of Science and Art, Nigde University, Nigde 51200 (Turkey)], E-mail: agurten@nigde.edu.tr; Erbil, Mehmet [Department of Chemistry, Faculty of Science and Art, Cukurova University, Adana 01330 (Turkey)

    2008-12-01

    The inhibition effect of the Schiff bases N,N'-bis(salicylidene)-1,2-ethylenediamine (Salen), N,N'-bis(5-methoxysalicylidene)-1,2-ethylenediamine (MeO-Salen) and N,N'-bis(5-nitrosalicylidene)-1,2-ethylenediamine (NO{sub 2}-Salen) on the corrosion of the mild steel in 1.0 M HCl has been studied by electrochemical impedance spectroscopy (EIS), linear polarisation resistance (LPR) and Tafel polarisation measurements. Maximum inhibition for MeO-Salen was obtained. Results showed that the inhibition efficiency have increased when the concentration of the Schiff bases have increased. Polarisation curves revealed that the Schiff bases acted as anodic inhibitors. The surface adsorption of the Schiff bases has lead to a decrease in the double layer capacitance and to an increase in polarisation resistance. The inhibitor performance depended strongly on the type of functional groups on benzene ring. The adsorption process is spontaneous one and follows Langmuir adsorption isotherm model. Scanning electron microscopy (SEM) has been applied to identify the surface morphology of the mild steel both in the absence and presence of the Schiff base molecules.

  6. Corrosion inhibition of mild steel in hydrochloric acid solution by some double Schiff bases

    Energy Technology Data Exchange (ETDEWEB)

    Soltani, N. [Payame Noor University (PNU), Shahin Shahr Branch, Isfahan (Iran, Islamic Republic of)], E-mail: N.Soltani@kashanu.ac.ir; Behpour, M.; Ghoreishi, S.M.; Naeimi, H. [Department of Chemistry, Faculty of Science, University of Kashan, Kashan (Iran, Islamic Republic of)

    2010-04-15

    The inhibition effect of four double Schiff bases on the corrosion of mild steel in 2 M HCl has been studied by polarization, electrochemical impedance spectroscopy (EIS) and weight loss measurements. The inhibitors were adsorbed on the steel surface according to the Langmuir adsorption isotherm model. From the adsorption isotherm, some thermodynamic data for the adsorption process were calculated and discussed. Kinetic parameters activation such as E{sub a}, {delta}H*, {delta}S* were evaluated from the effect of temperature on corrosion and inhibition processes. Quantum chemical calculations have been performed and several quantum chemical indices were calculated and correlated with the corresponding inhibition efficiencies.

  7. HYDROXYLAMMONIUM [ON 111 AQUEOUS HYDROCHLORIC ACID

    African Journals Online (AJOL)

    octacyanomolybdateiv) anion by hydroxylammonium ion has been studied in aqueous hydrochloric ... of substrates have been investigated in aqueous solution (1-7). The results of ... (4) and nitrogen was identified as described previously (8).

  8. Ethanol-based organosolv treatment with trace hydrochloric acid improves the enzymatic digestibility of Japanese cypress (Chamaecyparis obtusa) by exposing nanofibers on the surface.

    Science.gov (United States)

    Hideno, Akihiro; Kawashima, Ayato; Endo, Takashi; Honda, Katsuhisa; Morita, Masatoshi

    2013-03-01

    The effects of adding trace acids in ethanol based organosolv treatment were investigated to increase the enzymatic digestibility of Japanese cypress. A high glucose yield (60%) in the enzymatic hydrolysis was obtained by treating the sample at 170 °C for 45 min in 50% ethanol liquor containing 0.4% hydrochloric acid. Moreover, the enzymatic digestibility of the treated sample was improved to ∼70% by changing the enzyme from acremonium cellulase to Accellerase1500. Field emission scanning electron microscopy revealed the presence of lignin droplets and partial cellulose nanofibers on the surface of the treated sample. Simultaneous saccharification and fermentation of the treated samples using thermotolerant yeast (Kluyveromyces marxianus NBRC1777) was tested. A high ethanol concentration (22.1 g/L) was achieved using the EtOH50/W50/HCl0.4-treated sample compared with samples from other treatments.

  9. Extraction of Gold(III) from Hydrochloric Acid Solutions with a PVC-based Polymer Inclusion Membrane (PIM) Containing Cyphos(®) IL 104.

    Science.gov (United States)

    Bonggotgetsakul, Ya Ya Nutchapurida; Cattrall, Robert W; Kolev, Spas D

    2015-12-08

    Poly(vinyl chloride) (PVC) based polymer inclusion membranes (PIMs), with different concentrations of Cyphos® IL 104 as the membrane extractant/carrier, were studied for their ability to extract Au(III) from hydrochloric acid solutions. Some of the PIMs also contained one of the following plasticizers or modifiers: 2-nitrophenyloctyl ether, dioctylphthalate, 1-dodecanol, 1-tetradecanol, or tri(2-ethylhexyl) phosphate. The best performance, in terms of extraction rate and amount of Au(III) extracted, was exhibited by a PIM consisting of 25 wt% Cyphos(®) IL 104, 5 wt% 1-dodecanol, and 70 wt% PVC. An almost complete back-extraction of the Au(III) extracted from this membrane was achieved by using a 0.10 mol L(-1) Na₂SO₃ receiver solution at pH 8. The stoichiometry of the extracted Au(III)/Cyphos® IL 104 adduct was determined as [P]⁺ [AuCl₄](-) H⁺ [PO₂](-) where [P]⁺ and [PO₂](-) represent trihexyl(tetradecyl) phosphonium and bis(2,4,4-trimethylpentyl) phosphinate ions, respectively. Back-extraction of Au(III) is suggested to occur by reduction of Au(III) to Au(I), with the formation of the species [Au(SO₃)₂](3-) in the aqueous receiver solution. Loss of 1-dodecanol from the newly developed PIM to the aqueous solutions in contact with it was observed, which indicated that this membrane was suitable for single use in the efficient recovery of Au(III) from hydrochloric acid solutions of electronic scrap or recycled jewelry.

  10. An unusual presentation of hydrochloric acid ingestion: a mystery unraveled.

    Science.gov (United States)

    Ganapathy, Vinod Prabhu; Das, Rashmi Ranjan; Chinnakkannan, Selvakumar; Panda, Shasanka Shekhar

    2015-03-01

    Unintentional acid ingestion is less commonly encountered than alkali ingestion. The injury develops for hours to days after ingestion and often results in progressively increasing difficulty in airway management. However, gastric perforation is rare. A 3-year-old boy presented to us with an orotonsillopharyngeal membrane and severe upper airway obstruction. Subsequently, he was diagnosed with a case of gastric perforation due to unintentional hydrochloric acid ingestion. He was treated with partial gastrectomy and feeding jejunostomy, and the recovery was good. Unintentional hydrochloric acid ingestion is rare in children. The manifestations masquerade many other clinical conditions, and the diagnosis is difficult in cases in which history of ingestion is not available. Treatment is symptomatic, and emergency surgery is indicated in case of gastrointestinal perforation.

  11. Kinetic study of free fatty acid esterification reaction catalyzed by recoverable and reusable hydrochloric acid.

    Science.gov (United States)

    Su, Chia-Hung

    2013-02-01

    The catalytic performance and recoverability of several homogeneous acid catalysts (hydrochloric, sulfuric, and nitric acids) for the esterification of enzyme-hydrolyzed free fatty acid (FFA) and methanol were studied. Although all tested catalysts drove the reaction to a high yield, hydrochloric acid was the only catalyst that could be considerably recovered and reused. The kinetics of the esterification reaction catalyzed by hydrochloric acid was investigated under varying catalyst loading (0.1-1M), reaction temperature (303-343K), and methanol/FFA molar ratio (1:1-20:1). In addition, a pseudo-homogeneous kinetic model incorporating the above factors was developed. A good agreement (r(2)=0.98) between the experimental and calculated data was obtained, thus proving the reliability of the model. Furthermore, the reusability of hydrochloric acid in FFA esterification can be predicted by the developed model. The recoverable hydrochloric acid achieved high yields of FFA esterification within five times of reuse.

  12. Accidental intoxication with hydrochloric acid and hydrofluoric acid mixture

    Directory of Open Access Journals (Sweden)

    Anna Smędra-Kaźmirska

    2014-08-01

    Full Text Available The paper describes a fatal case of accidental ingestion of a mixture of hydrochloric acid and hydrofluoric acid. The man was admitted to hospital, where appropriate treatment, adequate to his condition, was instituted. Numerous ventricular fibrillation episodes, for which the patient was defibrillated repeatedly, were observed during the period of hospitalization. The patient was in a critical condition, with progressive symptoms of hypovolemic shock and multiorgan failure. On the next day after admission, signs of electromechanical dissociation progressing to asystole were noted. The instituted resuscitation procedure proved ineffective and the patient died. Autopsy revealed brownish discoloration of the esophageal, gastric, and small intestinal mucous membranes. Numerous ulcerations without signs of perforation were found both in the esophagus and in the stomach. The mucous membrane of the small intestine demonstrated focal rubefactions, whereas no focal lesions of the large intestinal mucosa were seen. Microscopic investigation of the biopsy specimens collected from the stomach, duodenum and small intestine revealed mucous membrane necrosis foci, reaching the deeper layers of the wall of these organs. The mucous membrane of the large intestine was congested. Bioptates obtained from the lungs indicated the presence of hemorrhagic infarcts and focal extravasations. Poisoning with the aforementioned acids with consequent necrosis of the esophageal, gastric, duodenal and small intestinal walls with hemorrhages to the gastrointestinal tract, as well as extravasations and hemorrhagic infarcts in the lungs was considered to be the cause of death.

  13. Accidental intoxication with hydrochloric acid and hydrofluoric acid mixture.

    Science.gov (United States)

    Smędra-Kaźmirska, A; Kędzierski, M; Barzdo, M; Jurczyk, Ap; Szram, S; Berent, J

    2014-01-01

    The paper describes a fatal case of accidental ingestion of a mixture of hydrochloric acid and hydrofluoric acid. The man was admitted to hospital, where appropriate treatment, adequate to his condition, was instituted. Numerous ventricular fibrillation episodes, for which the patient was defibrillated repeatedly, were observed during the period of hospitalization. The patient was in a critical condition, with progressive symptoms of hypovolemic shock and multiorgan failure. On the next day after admission, signs of electromechanical dissociation progressing to asystole were noted. The instituted resuscitation procedure proved ineffective and the patient died. Autopsy revealed brownish discoloration of the esophageal, gastric, and small intestinal mucous membranes. Numerous ulcerations without signs of perforation were found both in the esophagus and in the stomach. The mucous membrane of the small intestine demonstrated focal rubefactions, whereas no focal lesions of the large intestinal mucosa were seen. Microscopic investigation of the biopsy specimens collected from the stomach, duodenum and small intestine revealed mucous membrane necrosis foci, reaching the deeper layers of the wall of these organs. The mucous membrane of the large intestine was congested. Bioptates obtained from the lungs indicated the presence of hemorrhagic infarcts and focal extravasations. Poisoning with the aforementioned acids with consequent necrosis of the esophageal, gastric, duodenal and small intestinal walls with hemorrhages to the gastrointestinal tract, as well as extravasations and hemorrhagic infarcts in the lungs was considered to be the cause of death.

  14. A novel triazole-based cationic gemini surfactant: synthesis and effect on corrosion inhibition of carbon steel in hydrochloric acid

    Energy Technology Data Exchange (ETDEWEB)

    Qiu Lingguang [School of Chemistry and Chemical Engineering, Anhui University, Hefei 230039 (China)]. E-mail: lgahu@163.com; Xie Anjian [School of Chemistry and Chemical Engineering, Anhui University, Hefei 230039 (China); Shen Yuhua [School of Chemistry and Chemical Engineering, Anhui University, Hefei 230039 (China)

    2005-06-15

    A triazole-based cationic gemini surfactant, 3,5-bis(methylene octadecyl dimethylammonium chloride)-1,2,4-triazole (18-triazole-18) has been synthesized, and its effect on corrosion inhibition of A{sub 3} steel in 1 M HCl has been studied using the weight-loss method. The result showed that 18-triazole-18 acted as an excellent inhibitor in 1 M HCl. It was found that the adsorption mechanism of 18-triazole-18 on the steel surface in acid medium was quite different from that of cationic gemini surfactants containing dimethylene as a spacer, as well as that of conventional cationic single-chained surfactants, which is due to unique molecular structure of 18-triazole-18. 18-Triazole-18 may be adsorbed on the steel surface in acid medium through a maximum of four atoms or groups, i.e., the two nitrogen atoms of triazole ring and two quaternary ammonium head groups. Four regions of surfactant concentration could be divided to illustrate the adsorption of 18-triazole-18 on the steel surface, and four different adsorption mechanisms may take place in different regions of surfactant concentration.

  15. Corrosion inhibition of 6061 Al-15 vol. pct. SiC(p) composite and its base alloy in a mixture of sulphuric acid and hydrochloric acid by 4-(N,N-dimethyl amino) benzaldehyde thiosemicarbazone

    Energy Technology Data Exchange (ETDEWEB)

    Pinto, Geetha Mable [Department of Chemistry, National Institute of Technology Karnataka, Surathkal, Srinivasnagar 575 025, Mangalore, Karnataka (India); Nayak, Jagannath [Department of Metallurgical and Materials Engineering, National Institute of Technology Karnataka, Surathkal, Srinivasnagar 575 025, Karnataka (India); Shetty, A. Nityananda, E-mail: nityashreya@gmail.com [Department of Chemistry, National Institute of Technology Karnataka, Surathkal, Srinivasnagar 575 025, Mangalore, Karnataka (India)

    2011-02-15

    Research highlights: {yields} Corrosion inhibition of Al-SiC composite. {yields} DMABT as corrosion inhibitor. {yields} Inhibition through physisorption of DMABT. - Abstract: The corrosion inhibition characteristics of 4-(N,N-dimethylamino) benzaldehyde thiosemicarbazone (DMABT) on the corrosion behavior of 6061 Al-15 vol. pct. SiC(p) composite and its base alloy were studied at different temperatures in acid mixture medium containing varying concentrations of hydrochloric acid and sulphuric acid using Tafel extrapolation technique and ac impedance spectroscopy (EIS). The effect of inhibitor concentration, temperature and concentration of the acid mixture media on the inhibitor action was investigated. It was found that inhibition efficiencies increase with the increase in inhibitor concentration, but decrease with the increase in temperature and with the increase in concentration of the acid media. Thermodynamic parameters for dissolution process were determined. The adsorption of DMABT on both the composite and base alloy was found to be through physisorption obeying Freundlich adsorption isotherm.

  16. Corrosion inhibition efficiency and surface activity of benzothiazol-3-ium cationic Schiff base derivatives in hydrochloric acid

    Energy Technology Data Exchange (ETDEWEB)

    Negm, N.A., E-mail: nabelnegm@hotmail.co [Petrochemicals Department, Egyptian Petroleum Research Institute, Nasr City, Cairo (Egypt); Elkholy, Y.M.; Zahran, M.K. [Chemistry Department, Faculty of Science, Helwan University, Helwan (Egypt); Tawfik, S.M. [Petrochemicals Department, Egyptian Petroleum Research Institute, Nasr City, Cairo (Egypt)

    2010-10-15

    Research highlights: {yields} Benzothiazolium inhibitors show high corrosion inhibition for carbon steel. {yields} Weight loss and corrosion rates decrease by increasing inhibitor dose. {yields} Inhibition mechanism suggested as physisorption mechanism supported by adsorption free energy values. {yields} The adsorption of the inhibitors obeys Langmuir isotherm. {yields} Side chains have ascending order on the corrosion inhibition of the different inhibitors. - Abstract: Two series of cationic Schiff base surfactants namely: 2-(benzylideneamino)-3-(2-oxo-2-alkoxyethyl)-1,3-benzothiazol-3-ium bromide and 2-[(4-methoxybenzylidene)amino]-3-(2-oxo-2-alkoxyethyl)-1, 3-benzothiazol-3-ium bromide were prepared and confirmed using elemental analysis, FTIR, and {sup 1}H NMR spectra. The surface activity of the synthesized Schiff bases showed their tendency towards adsorption at the interfaces. The prepared compounds were evaluated as corrosion inhibitors for carbon steel in 0.5 M HCl solution using gravimetric and polarization measurements. By fitting the gravimetric data, some thermodynamic and kinetic parameters were estimated. The adsorption of the inhibitors on the carbon steel surface obeyed Langmuir adsorption isotherm and had a physical mechanism. Polarization measurements showed that the synthesized inhibitors act as mixed inhibitors for carbon steel in the acidic media. The results of the corrosion inhibition using two different methods showed narrow differences in the obtained values between the two methods within 5%.

  17. Electrochemical impedance study on the corrosion of Al-Pure in hydrochloric acid solution using Schiff bases

    Indian Academy of Sciences (India)

    A S Patel; V A Panchal; N K Shah

    2012-04-01

    The inhibition effect of newly synthesized Schiff bases -benzylidene benzylamine (A) and benzenemethanamine--methyl--(phenylmethylene) (B) on the corrosion behaviour of Al-Pure in 1.0 M HCl was studied using galvanostatic polarization and electrochemical impedance spectroscopy (EIS) and adsorption studies. The effects of inhibitor concentration, temperature and surface coverage are investigated. The effect of inhibitor concentration and other parameters are evaluated for different inhibitor concentrations and the probable mechanism was also proposed. The results show that (A) and (B) possess excellent inhibiting effect for the corrosion of Al-Pure and the inhibitors act as mixed type inhibitors. The inhibitors do not affect the mechanism of the electrode processes and inhibit corrosion by blocking the reaction sites. The high inhibition efficiency of (A) and (B) were due to the adsorption of inhibitor molecules on the metal surface. The decrease of surface area available for electrode reactions to take place is due to the formation of a protective film. Activation energy and free energy of adsorption have been calculated.

  18. Kinetics of Sawdust Hydrolysis with Dilute Hydrochloric Acid and Ferrous Chloride

    Institute of Scientific and Technical Information of China (English)

    袁传敏; 颜涌捷; 任铮伟; 李庭琛; 曹建勤

    2004-01-01

    With dilute hydrochloric acid as catalyst and promoted by ferrous chloride, hydrolysis of waste sawdust to produce monosaccharides was conducted by using an one-step method in a batch-wise operation reactor. Based on the model of first order consecutive irreversible reactions, the kinetics equation incorporating the term of catalyst concentration was obtained that is suitable for describing the hydrolysis of sawdust. Activation energies were calculated for hydrolysis of sawdust and decomposition of monosaccharides.

  19. Laboratory investigation of three distinct emissions monitors for hydrochloric acid.

    Science.gov (United States)

    Dene, Charles E; Pisano, John T; Durbin, Thomas D; Bumiller, Kurt; Crabbe, Keith; Muzio, Lawrence J

    2016-12-01

    The measurement of hydrochloric acid (HCl) on a continuous basis in coal-fired plants is expected to become more important if HCl standards become implemented as part of the Federal Mercury and Air Toxics Standards (MATS) standards that are under consideration. For this study, the operational performance of three methods/instruments, including tunable diode laser absorption spectroscopy (TDLAS), cavity ring down spectroscopy (CRDS), and Fourier transform infrared (FTIR) spectroscopy, were evaluated over a range of real-world operating environments. Evaluations were done over an HCl concentration range of 0-25 ppmv and temperatures of 25, 100, and 185 °C. The average differences with respect to temperature were 3.0% for the TDL for values over 2.0 ppmv and 6.9% of all concentrations, 3.3% for the CRDS, and 4.5% for the FTIR. Interference tests for H2O, SO2, and CO, CO2, and NO for a range of concentrations typical of flue gases from coal-fired power plants did not show any strong interferences. The possible exception was an interference from H2O with the FTIR. The instrument average precision over the entire range was 4.4% for the TDL with better precision seen for concentrations levels of 2.0 ppmv and above, 2.5% for the CRDS, and 3.5% for the FTIR. The minimum detection limits were all on the order of 0.25 ppmv, or less, utilizing the TDL values with a 5-m path. Zero drift was found to be 1.48% for the TDL, 0.88% for the CRDS, and 1.28% for the FTIR. This study provides an evaluation of the operational performance of three methods/instruments, including TDL absorption spectroscopy (TDLAS), cavity ring down spectroscopy (CRDS), and FTIR spectroscopy, for the measurement of hydrochloric acid (HCl) over a range of real-world operating environments. The results showed good instrument accuracy as a function of temperature and no strong interferences for flue gases typical to coal-fired power plants. The results show that these instruments would be viable for the

  20. Synthesis of imidazoline-based dissymmetric bis-quaternary ammonium gemini surfactant and its inhibition mechanism on Q235 steel in hydrochloric acid medium

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, J.; Gong, X.L.; Song, W.W.; Jiang, B.; Du, M. [Key Laboratory of Marine Chemistry Theory and Technology, Ministry of Education, College of Chemistry and Chemical Engineering, Ocean University of China, Qingdao, Shandong Province (China)

    2012-07-15

    An imidazoline-based dissymmetric bis-quaternary ammonium gemini surfactant has been synthesized. Its surface active properties at equilibrium in water at 25 C were determined. The inhibitive effect of the compound on Q235 steel in 1 M hydrochloric solution was investigated by the weight-loss method, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM) analysis, and quantum chemical calculations. The results indicate that the compound has high surface properties and the inhibition efficiency (IE) increases with the increase in inhibitor concentration, which attain the maximum value around the CMC value. The imidazoline-based dissymmetric bis-quaternary ammonium acts as a mixed type inhibitor mainly inhibiting the cathodic processes and does not change the mechanism of either hydrogen evolution reaction or mild steel dissolution. The best IE is obtained at the immersion time of 144 h. The adsorption of the studied inhibitor on Q235 steel can be fitted to a Langmuir isotherm and the adsorption process is a spontaneous chemical adsorption. Quantum chemistry calculation results show that the imidazoline ring and heteroatoms of N, O, are the active sites of the inhibitors. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  1. Determination of uranium isotopes in environmental samples by anion exchange in sulfuric and hydrochloric acid media.

    Science.gov (United States)

    Popov, L

    2016-09-01

    Method for determination of uranium isotopes in various environmental samples is presented. The major advantages of the method are the low cost of the analysis, high radiochemical yields and good decontamination factors from the matrix elements, natural and man-made radionuclides. The separation and purification of uranium is attained by adsorption with strong base anion exchange resin in sulfuric and hydrochloric acid media. Uranium is electrodeposited on a stainless steel disk and measured by alpha spectrometry. The analytical method has been applied for the determination of concentrations of uranium isotopes in mineral, spring and tap waters from Bulgaria. The analytical quality was checked by analyzing reference materials.

  2. Comparison between phosphoric acid and hydrochloric acid in microabrasion technique for the treatment of dental fluorosis

    OpenAIRE

    Mahshid Mohammadi Bassir; Golnaz Bagheri

    2013-01-01

    Purpose: To compare the effectiveness of phosphoric acid (H 3 PO 4 )-pumice compound with conventional hydrochloric acid (HCl)-pumice compound in treating different severities of dental fluorosis with the microabrasion technique. Materials and Methods: Sixty-seven anterior teeth from seven patients with different severities of dental fluorosis were treated. In each patient, half of the teeth were treated with HCl-pumice compound and the other half with H 3 PO 4 -pumice compound (split-mou...

  3. Camphor Sulfonic Acid-hydrochloric Acid Codoped Polyaniline/polyvinyl Alcohol Composite: Synthesis and Characterization

    OpenAIRE

    Jorge Enrique Osorio-Fuente; Carlos Gómez-Yáñez; María de los Ángeles Hernández-Pérez; Fidel Pérez-Moreno

    2014-01-01

    A complementary dopant system formed by hydrochloric and camphor sulfonic (CSA) acids was used in the in-situ synthesis of a polyaniline (PANi)/polyvinyl alcohol (PVA) composite. The conductivity measurements showed that the use of CSA either as single dopant or codopant caused a decrement up to 2 orders of magnitude on the overall conductivity as well as an improvement on thermal stability. The PANi/PVA composites were characterized by spectroscopic and thermal analysis. Conducting emeraldin...

  4. Selenium dioxide catalysed oxidation of acetic acid hydrazide by bromate in aqueous hydrochloric acid medium

    Indian Academy of Sciences (India)

    R S Yalgudre; G S Gokavi

    2012-07-01

    Selenium dioxide catalysed acetic acid hydrazide oxidation by bromate was studied in hydrochloric acid medium. The order in oxidant concentration, substrate and catalyst were found to be unity. Increasing hydrogen ion concentration increases the rate of the reaction due to protonation equilibria of the oxidant. The mechanism of the reaction involves prior complex formation between the catalyst and substrate, hydrazide, followed by its oxidation by diprotonated bromate in a slow step. Acetic acid was found to be the oxidation product. Other kinetic data like effect of solvent polarity and ionic strength on the reaction support the proposed mechanism.

  5. Superficial performance and pore structure of palygorskite treated by hydrochloric acid

    Institute of Scientific and Technical Information of China (English)

    LIU Yi-xin; DAI Wei-wei; Wang Ting; TAO Yong

    2006-01-01

    In order to amend the superficial performance of palygorskite and improve its application, the natural palygorskite(NP) was treated in the dipping and ionic exchanging experiments using 6 mol/L hydrochloric acid treatment. The performance and pore structure of the treated palygorskite(TP) were investigated by means of microscope analyses, FT-IR, XRF, BET-SSA and full hole distribution analytical techniques. The results show that the hydrochloric acid treatment can make the gracile and aggregating compact crystal bundles inside palygorskite clay broken and dispersed, the roughness of microcrystalline surface increases, which not only can dissolve or remove dolomite but vary the superficial performance of palygorskite to some degree. The specific surface area and pore volume increase a lot, while the mean pore size decreases. The pore structure of TP changes remarkably compared with that of NP after 6 mol/L hydrochloric acid treatment, and the relevant physicochemical performance can be improved.

  6. Extraction of Alumina from high-silica bauxite by hydrochloric acid leaching using preliminary roasting method

    Science.gov (United States)

    Valeev, D. V.; Mansurova, E. R.; Bychinskii, V. A.; Chudnenko, K. V.

    2016-02-01

    A process of dissolution Severoonezhsk deposit boehmite-kaolinite bauxite by hydrochloric acid, as well as the processes that occur during open-air calcination, were investigated. A dehydration process has been studied, and the basic phase transformation temperatures were identified. Temperature and time of calcination influence on bauxite dehydration speed were determined. It is shown that the preliminary calcination increases the extraction ratio of alumina into solution up to 89%. Thermodynamic modelling of physical and chemical processes of bauxite decomposition by hydrochloric acid and the basic forms of aluminium speciation in solution were obtained.

  7. Molecular Structure of Phenylthiourea as a Corrosion Inhibitor for Mild Steel in Hydrochloric Acid

    Institute of Scientific and Technical Information of China (English)

    Anees A, Khadom

    2011-01-01

    The application of statistical analysis and quantum chemical models on the corrosion inhibition of mild steel in hydrochloric acid in presence of phenylthiourea (PTU) as corrosion inhibitor have been investigated. Two mathematical models were used, second order polynomial model and Arrhenius type equation model. STATISTICA software based on Levenberg-Marquardt estimation method was used to evaluate the coefficients of two Models. It follows that the two models were suitable to represent the corrosion rate data at different conditions. The correlation coefficient of second order polynomial model was 0.973, while for the Arrhenius type model was 0.919. The structure of inhibitor was optimized by ArgusLab 4.0.1 package. The quantum chemical parameters (EHoMO, ELUMO, AE, and dipole moment μ) were estimated by PM3-SCF method.

  8. Extraction Mechanism of La3+ from Hydrochloric Acid Solution Using Cyanex 302

    Institute of Scientific and Technical Information of China (English)

    乌东北; 牛春吉; 李德谦

    2004-01-01

    The solvent extraction of La3+ from hydrochloric acid solutions was investigated using bis(2, 4, 4-trimethylpentyl) monothiophosphinic acid(Cyanex 302, HL) as an extractant. The effect of equilibrium of aqueous acidity on extraction of La3+ using Cyanex 302 in different diluents was discussed. The effects of extractant concentration and chloride ion on the extraction reaction were also studied. Stoichiometry of the extraction reactions and the nature of metal complexes formed were determined using slope analysis technique and IR measurement.

  9. Acidification of formula with citric acid is equally effective and better tolerated than acidification with hydrochloric acid.

    Science.gov (United States)

    Mehall, John R; Saltzman, Daniel A; Jackson, Richard J; Smith, Samuel D

    2002-08-01

    To determine whether acidification of formula with citric acid is equally protective against bacterial translocation and gut colonization but better tolerated than acidification with hydrochloric acid in neonatal rabbits. Paired animal model with control. Animal laboratory. Premature neonatal New Zealand rabbit pups. A standard neonatal rabbit model in two versions, a bacterial challenge and a no bacterial challenge model, was used to assess bacterial translocation and gut colonization. Two hundred forty-six rabbit pups were delivered by cesarean section 1 day premature and randomly placed into two groups sorted by type of formula acidification (hydrochloric acid or citric acid). Pups were gavage fed pH 3 kitten formula every 12 hrs. Ranitidine hydrochloride at 20 mg x kg(-1) x day(-1) was added to all formula. Bacterial challenge animals were given 1 x 10(6) colony-forming units/mL of Enterobacter cloacae with the third feeding. Animals in the no bacterial challenge group received no bacterial challenge. Animals were killed on day of life 3, and the liver, spleen, mesenteric lymph nodes, and cecum were sequentially harvested and cultured. Organs were qualitatively judged for growth, whereas cecal cultures were quantified as colony-forming units/gram. Stomach biopsies were performed to look for mucosal damage. Long-term tolerance was assessed in 48 pups fed formula acidified to pH 3 with either hydrochloric acid or citric acid and 20 animals fed pH 7 formula without ranitidine. Weight gain and mortality rate were followed for 14 days. Gut colonization and bacterial translocation to liver, spleen, and mesenteric lymph nodes were equivalent between citric acid and hydrochloric acid in both bacterial challenge and no bacterial challenge models. Long term, citric acid animals exceeded hydrochloric acid animals in daily weight gain and survival (p formula with citric acid is equally protective against bacteria but better tolerated than acidification with hydrochloric

  10. Influence of Formazan Derivatives on Corrosion Inhibition of Mild Steel in Hydrochloric Acid Medium

    OpenAIRE

    Venkatesan, P.; Anand, B.; P. Matheswaran

    2009-01-01

    Formazan of benzaldehyde (FB) and formazan of p-dimethyl amino benzaldehyde (FD) were synthesized. These compounds were studied as corrosion inhibitor for mild steel in 1.11 N hydrochloric acid by weight loss method. The result showed that the corrosion inhibition efficiency of these compounds was found to vary with the temperature and acid concentration. Also, it was found that the corrosion inhibition behaviour of FD is greater than that of FB. The kinetic treatment of the results gave firs...

  11. Inhibitory effect of some carbazides on corrosion of aluminium in hydrochloric acid and sodium hydroxide solutions

    Energy Technology Data Exchange (ETDEWEB)

    Fouda, A.S. [El-Mansoura Univ. (Egypt). Dept. of Chemistry; Madkour, L.H. [Tanta Univ. (Egypt). Dept. of Chemistry; Elshafei, A.A. [El-Mansoura Univ. (Egypt). Dept. of Chemistry; Elasklany, A.H. [El-Mansoura Univ. (Egypt). Dept. of Chemistry

    1995-06-01

    The dissolution of aluminium in hydrochloric acid and sodium hydroxide solutions in the presence of semicarbazide, thiosemicarbazide and sym.diphenylcarbazide as corrosion inhibitors has been studied using thermometric, weight-loss and polarization methods. The three methods gave consistent results. The higher inhibition efficiency of these compounds in acidic than in alkaline madia may be due to the less negative potential of aluminium in hydrochloric acid solution, favouring adsorption of the additive. The adsorption of these compounds were found to obey Frumkin adsorption isotherm. Cathodic polarization measurements showed that these compounds are cathodic inhibitors and their adsorption in the double layer does not change the mechanism of the hydrogen evolution reaction. The results are analysed in terms of both molecular and cationic adsorption. (orig.)

  12. Rare earth elements recycling from waste phosphor by dual hydrochloric acid dissolution.

    Science.gov (United States)

    Liu, Hu; Zhang, Shengen; Pan, Dean; Tian, Jianjun; Yang, Min; Wu, Maolin; Volinsky, Alex A

    2014-05-15

    This paper is a comparative study of recycling rare earth elements from waste phosphor, which focuses on the leaching rate and the technical principle. The traditional and dual dissolution by hydrochloric acid (DHA) methods were compared. The method of dual dissolution by hydrochloric acid has been developed. The Red rare earth phosphor (Y0.95Eu0.05)2O3 in waste phosphor is dissolved during the first step of acid leaching, while the Green phosphor (Ce0.67Tb0.33MgAl11O19) and the Blue phosphor (Ba0.9Eu0.1MgAl10O17) mixed with caustic soda are obtained by alkali sintering. The excess caustic soda and NaAlO2 are removed by washing. The insoluble matter is leached by the hydrochloric acid, followed by solvent extraction and precipitation (the DHA method). In comparison, the total leaching rate of the rare earth elements was 94.6% by DHA, which is much higher than 42.08% achieved by the traditional method. The leaching rate of Y, Eu, Ce and Tb reached 94.6%, 99.05%, 71.45%, and 76.22%, respectively. DHA can decrease the consumption of chemicals and energy. The suggested DHA method is feasible for industrial applications.

  13. Experimental and quantum chemical studies on corrosion inhibition performance of fluconazole in hydrochloric acid solution

    Indian Academy of Sciences (India)

    P Malekmohammadi Nouri; M M Attar

    2015-04-01

    The corrosion inhibition effect of fluconazole (FLU) was investigated on steel in 1 M hydrochloric acid solution. Weight loss measurements and atomic force microscope analysis were utilized to investigate the corrosion inhibition properties and film formation behaviour of FLU. Quantum chemical approach was also used to calculate some electronic properties of the molecule in neutral and protonated form in order to find any correlation between the inhibition effect and molecular structure of FLU molecule. The results showed that FLU can act as a good corrosion inhibitor for steel in hydrochloric acid solution at different temperatures and it can inhibit steel corrosion up to 95%. The adsorption followed the Langmuir isotherm and the thermodynamic parameters were also determined and discussed. Quantum chemical studies showed that in adsorption process of FLU molecules, nitrogen and oxygen atoms and benzene ring act as active centres.

  14. Pretreatment of corn stover for sugar production using dilute hydrochloric acid followed by lime.

    Science.gov (United States)

    Zu, Shuai; Li, Wen-zhi; Zhang, Mingjian; Li, Zihong; Wang, Ziyu; Jameel, Hasan; Chang, Hou-min

    2014-01-01

    In this study, a two stage process was evaluated to increase the sugar recovery. Firstly, corn stover was treated with diluted hydrochloric acid to maximize the xylose yield, and then the residue was treated with lime to alter the lignin structure and swell the cellulose surface. The optimal condition was 120 °C and 40 min for diluted hydrochloric acid pretreatment followed by lime pretreatment at 60 °C for 12h with lime loading at 0.1 g/g of substrate. The glucose and xylose yield was 78.0% and 97.0%, respectively, with cellulase dosage at 5 FPU/g of substrate. The total glucose yield increased to 85.9% when the cellulase loading was increased to 10 FPU/g of substrate. This two stage process was effective due to the swelling of the internal surface, an increase in the porosity and a decrease in the degree of polymerization.

  15. ANTICORROSION POTENTIAL OF HYDRALAZINE FOR CORROSION OF MILD STEEL IN 1M HYDROCHLORIC ACID SOLUTION

    Directory of Open Access Journals (Sweden)

    B. M. Prasanna

    2015-05-01

    Full Text Available Anticorrosion potential of mild steel by Hydralazine as corrosion inhibitor for mild steel in 1M hydrochloric acid was investigated by chemical and electrochemical measurements at 303-333 K temperature. The maximum inhibition efficiency of inhibitor by Weight loss method is around 90%, Tafel polarization method is around 85%; electrochemical impedance spectroscopy measurement around 90% at 1250 ppm of Hydralazine in. The result shows that the inhibition efficiency increases with I 1M hydrochloric acid. Hydralazine acts as a mixed type inhibitor which inhibits the corrosion of mild steel due to the adsorption on metal surface. This adsorption system obeys the Langmuir adsorption isotherm.Activation parameters explains the effect of temperature with inhibition efficiency of inhibitor molecule.SEM images of inhibited mild steel strips shows a formation of passive protective film over the surface.

  16. Acid hydrolysis of corn stover using hydrochloric acid: Kinetic modeling and statistical optimization

    Directory of Open Access Journals (Sweden)

    Sun Yong

    2014-01-01

    Full Text Available The hydrolysis of corn stover using hydrochloric acid was studied. The kinetic parameters of the mathematical models for predicting the yields of xylose, glucose, furfural and acetic acid were obtained, and the corresponding xylose generation activation energy of 100 kJ/mol was determined. The characterization of corn stover using with different techniques during hydrolysis indicated an effective removal of xylan and the slightly alteration on the structures of cellulose and lignin. A 23five levels Central Composite Design (CCD was used to develop a statistical model for the optimization of process variables including acid concentration, pretreatment temperature and time. The optimum conditions determined by this model were found to be 108ºC for 80 minutes with acid concentration of 5.8%. Under these conditions, the maximised results are the following: xylose 19.93 g/L, glucose 1.2 g/L, furfural 1.5 g/L, acetic acid 1.3 g/L. The validation of the model indicates a good agreement between the experimental results and the predicted values.

  17. Inhibition of Mild Steel Corrosion in Hydrochloric Acid Solution by Ciprofloxacin Drug

    OpenAIRE

    2013-01-01

    The inhibition of mild steel corrosion in hydrochloric acid solution by ciprofloxacin drug as an eco-friendly and commercially available inhibitor was studied at room temperature by weight loss technique. It was found that the test drug has a promising inhibitory action against corrosion of mild steel in the medium investigated. The inhibition efficiency was found to increase with a corresponding increase in the concentration of the inhibitor. It was also found that the adsorption as well as ...

  18. Corrosion Inhibition Synergism between Lanthanum(Ⅲ) Ion and 8-Hydroxyquinoline for Zinc in Hydrochloric Acid

    Institute of Scientific and Technical Information of China (English)

    木冠南; 唐丽斌; 李学铭

    2002-01-01

    The effects of La3+ ion and chelate reagent 8-hydroxyquinoline on the corrosion rate of zinc in hydrochloric acid were investigated by using weight loss method and electrochemical method. It is found that in a specific concentration range of La3+ ion and 8-hydroxyquinoline, the obvious corrosion inhibition synergism is obtained. The mechanism of corrosion inhibition synergism was discussed on basis of adsorption theory.

  19. Effect of dentifrices against hydrochloric acid-induced erosion.

    Science.gov (United States)

    Messias, Danielle Cristine; Maeda, Fernando Akio; Turssi, Cecilia Pedroso; Serra, Mônica Campos

    2011-01-01

    This in vitro investigation assessed whether different dentifrices would be capable of controlling the enamel erosion progression caused by HCl. Sixty bovine enamel slabs were covered with acid-resistant varnish, except for a 2.5-mm2 circular area on the labial surface. According to a complete block design, the experimental units were immersed in HCl solution (pH 1.2; 0.1M). After storage in artificial saliva for 1 h, specimens (n = 15) were exposed to different dentifrices: Sensodyne Cool Gel (1100 ppm F), Sensodyne ProNamel (1450 ppm F), and PrevDent 5000 (5000 ppm F). The control group was immersed in deionised water. Following five cycles of erosive challenge, the slabs were prepared for porosity evaluation using solutions of copper sulfate and rubeanic acid. ANOVA demonstrated no difference in the enamel porosity as a function of the dentifrice employed (P = 0.5494). The damage caused by a simulated intrinsic erosive challenge seems unable to be controlled by fluoridated dentifrices, even when this ion is found in elevated concentrations.

  20. Electrochemical and theoretical investigation of the inhibitory effect of two Schiff bases of benzaldehyde for the corrosion of aluminium in hydrochloric acid

    Science.gov (United States)

    Naik, U. J.; Jha, P. C.; Lone, M. Y.; Shah, R. R.; Shah, N. K.

    2016-12-01

    The corrosion inhibition effect of o-Aminophenol-N-Benzylidene (o-AmphNB) and o-Anisidene-N-Benzylidene (o-AnsNB) for pure Aluminium in 1 M HCl at different concentrations of two different inhibitors were investigated by means of weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The values of Δ Gadso revealed that the adsorption mechanism of these molecules on aluminium surface is competitive phenomenon between chemical and physical adsorption. Potentiodynamic polarization parameters revealed the mixed mode of inhibition with predominance of cathodic inhibition. The impedance results showed that with increase in concentration of inhibitor, charge transfer resistance increases while double layer capacitance decreases. Quantum chemical calculations based on density functional theory (DFT) method were performed on o-AmphNB and o-AnsNB to determine the relationship between molecular structures and their inhibition efficiencies. Correlation analysis concluded that the inhibition effect of inhibitors could be explained in terms of electronic properties.

  1. Corrosion inhibition of iron in hydrochloric acid by polyacrylamide

    Directory of Open Access Journals (Sweden)

    DRAGICA CHAMOVSKA

    2007-07-01

    Full Text Available The corrosion protection and/or adsorption of polyacrylamide (PAA of number average molecular weight, , between 15,000 – 1,350,000 g mol-1 on mild steel and iron (99.99 % Fe in 3 M HCl at room temperature was studied using spectrophotometry (the phenanthroline method, the weight loss method and EIS (Electrochemical Impedance Spectroscopy. It was found that the corrosion protect­tion efficiency of the PAA – adsorbed layers strongly depends on both the molar concentration of PAA in the solution and its molecular weight, reaching limiting values between 85 and 96 %. Simultaneously, it was also concluded that a relatively high surface coverage could be obtained with very low PAA concentrations (0.5 – 2 ppm, indicating the good adsorption characteristics of PAA on mild steel and iron in hydrochloride acid. The experimentally obtained results follow a Lan­gmuir adsorption isotherm. According to the best fitting parameters, the adsorption coef­f­i­cient B ranged between 2×107 and 4×108 mol-1 and depended strongly on the mole­cular weight of the PAA: B = k (for a ≈ 0.67 and k = 2.95×104 or the size of the polymer coil. As was found by EIS, the thickness of the adsorbed PAA layer was approx. 1.1 nm (for er = 15 and corresponded only to the polymer segments attached to the metal surface. On the other hand, as was found by ellipsometry, the limiting layer of the adsorbed PAA molecules was highly voluminous and relatively thick (100 – 200 nm, containing entangled polymer coils.

  2. Investigating the Acid Failure of Aluminium Alloy in 2 M Hydrochloric Acid Using Vernonia amygdalina

    Directory of Open Access Journals (Sweden)

    Olugbenga A. Omotosho

    2012-04-01

    Full Text Available The acid failure of aluminium alloy in 2 M hydrochloric acid solution in the presence of Vernonia amygdalina extract was investigated using gasometric technique. Aluminium alloy coupons of dimension 4 cm by 1 cm were immersed in test solutions of free acid and also those containing extract volumes of 2, 3, 4 and 5 cm3 at ambient temperature for 30 minutes. The volumes of hydrogen gas evolved as a result of the rate of reaction were recorded and analyzed. Analysis revealed that maximum inhibitor efficiency which corresponds to the lowest corrosion rate was obtained at optimum inhibitor volumes of 5 cm3, with reduction in the corrosion rate observed to follow in order of increasing extract volumes. Adsorption study revealed that Temkin isotherm best described the metal surface interaction with the extract phytochemicals, with 12 minutes becoming the best exposure time for the phytochemicals to adsorb to the metal surface at all volumes. Statistical modelling of the corrosion rate yielded an important relationship suitable for estimating corrosion rate values once volumes of the extract is known. Microstructural studies, showed an indirect relationship between crack growth rates and extract volumes, while consistency of the irregular intermetallic phases increases with increasing extract volumes.

  3. Removing hydrochloric acid exhaust products from high performance solid rocket propellant using aluminum-lithium alloy.

    Science.gov (United States)

    Terry, Brandon C; Sippel, Travis R; Pfeil, Mark A; Gunduz, I Emre; Son, Steven F

    2016-11-05

    Hydrochloric acid (HCl) pollution from perchlorate based propellants is well known for both launch site contamination, as well as the possible ozone layer depletion effects. Past efforts in developing environmentally cleaner solid propellants by scavenging the chlorine ion have focused on replacing a portion of the chorine-containing oxidant (i.e., ammonium perchlorate) with an alkali metal nitrate. The alkali metal (e.g., Li or Na) in the nitrate reacts with the chlorine ion to form an alkali metal chloride (i.e., a salt instead of HCl). While this technique can potentially reduce HCl formation, it also results in reduced ideal specific impulse (ISP). Here, we show using thermochemical calculations that using aluminum-lithium (Al-Li) alloy can reduce HCl formation by more than 95% (with lithium contents ≥15 mass%) and increase the ideal ISP by ∼7s compared to neat aluminum (using 80/20 mass% Al-Li alloy). Two solid propellants were formulated using 80/20 Al-Li alloy or neat aluminum as fuel additives. The halide scavenging effect of Al-Li propellants was verified using wet bomb combustion experiments (75.5±4.8% reduction in pH, ∝ [HCl], when compared to neat aluminum). Additionally, no measurable HCl evolution was detected using differential scanning calorimetry coupled with thermogravimetric analysis, mass spectrometry, and Fourier transform infrared absorption. Copyright © 2016 Elsevier B.V. All rights reserved.

  4. Thermodynamics and kinetics of lutetium extraction with HEH(EHP) in hydrochloric acid medium

    Institute of Scientific and Technical Information of China (English)

    DONG Jinshi; XU Yang; WANG Liangshi; HUANG Xiaowei; LONG Zhiqi; WU Shengxi

    2016-01-01

    Solvent extraction has been the most widely used technique for rare earths separation. In this study, thermodynamics and kinetics of lutetium extraction with HEH (EHP) in hydrochloric acid medium were investigated. The extraction mechanism and the relevant parameters were determined by experiment research which can guide the practical extraction process. The data indicated that chloride ion had no effect on lutetium extraction, the rate constant increased when stirring speed was enhanced. Effects of temperature, HEH (EHP) concentration, acidity, and chloride concentration were also studied. Thickness of the diffusion film was also calculated to be 4.66×10–3 cm at 150 r/min.

  5. Influence of Formazan Derivatives on Corrosion Inhibition of Mild Steel in Hydrochloric Acid Medium

    Directory of Open Access Journals (Sweden)

    P. Venkatesan

    2009-01-01

    Full Text Available Formazan of benzaldehyde (FB and formazan of p-dimethyl amino benzaldehyde (FD were synthesized. These compounds were studied as corrosion inhibitor for mild steel in 1.11 N hydrochloric acid by weight loss method. The result showed that the corrosion inhibition efficiency of these compounds was found to vary with the temperature and acid concentration. Also, it was found that the corrosion inhibition behaviour of FD is greater than that of FB. The kinetic treatment of the results gave first order kinetics. The relative corrosion inhibition efficiency of these compounds has been explained on the basis of structure dependent - electron donor properties of the inhibitors.

  6. Formation of linear polyenes in poly(vinyl alcohol) films catalyzed by phosphotungstic acid, aluminum chloride, and hydrochloric acid

    Science.gov (United States)

    Tretinnikov, O. N.; Sushko, N. I.; Malyi, A. B.

    2016-07-01

    Formation of linear polyenes-(CH=CH)n-via acid-catalyzed thermal dehydration of polyvinyl alcohol in 9- to 40-µm-thick films of this polymer containing hydrochloric acid, aluminum chloride, and phosphotungstic acid as dehydration catalysts was studied by electronic absorption spectroscopy. The concentration of long-chain ( n ≥ 8) polyenes in films containing phosphotungstic acid is found to monotonically increase with the duration of thermal treatment of films, although the kinetics of this process is independent of film thickness. In films containing hydrochloric acid and aluminum chloride, the formation rate of polyenes with n ≥ 8 rapidly drops as film thickness decreases and the annealing time increases. As a result, at a film thickness of less than 10-12 µm, long-chain polyenes are not formed at all in these films no matter how long thermal duration is. The reason for this behavior is that hydrochloric acid catalyzing polymer dehydration in these films evaporates from the films during thermal treatment, the evaporation rate inversely depending on film thickness.

  7. Leaching lithium from the anode electrode materials of spent lithium-ion batteries by hydrochloric acid (HCl).

    Science.gov (United States)

    Guo, Yang; Li, Feng; Zhu, Haochen; Li, Guangming; Huang, Juwen; He, Wenzhi

    2016-05-01

    Spent lithium-ion batteries (LIBs) are considered as an important secondary resource for its high contents of valuable components, such as lithium and cobalt. Currently, studies mainly focus on the recycling of cathode electrodes. There are few studies concentrating on the recovery of anode electrodes. In this work, based on the analysis result of high amount of lithium contained in the anode electrode, the acid leaching process was applied to recycle lithium from anode electrodes of spent LIBs. Hydrochloric acid was introduced as leaching reagent, and hydrogen peroxide as reducing agent. Within the range of experiment performed, hydrogen peroxide was found to have little effect on lithium leaching process. The highest leaching recovery of 99.4wt% Li was obtained at leaching temperature of 80°C, 3M hydrochloric acid and S/L ratio of 1:50g/ml for 90min. The graphite configuration with a better crystal structure obtained after the leaching process can also be recycled.

  8. Effect of beverages on bovine dental enamel subjected to erosive challenge with hydrochloric acid.

    Science.gov (United States)

    Amoras, Dinah Ribeiro; Corona, Silmara Aparecida Milori; Rodrigues, Antonio Luiz; Serra, Mônica Campos

    2012-01-01

    This study evaluated by an in vitro model the effect of beverages on dental enamel previously subjected to erosive challenge with hydrochloric acid. The factor under study was the type of beverage, in five levels: Sprite® Zero Low-calorie Soda Lime (positive control), Parmalat® ultra high temperature (UHT) milk, Ades® Original soymilk, Leão® Ice Tea Zero ready-to-drink low-calorie peach-flavored black teaand Prata® natural mineral water (negative control). Seventy-five bovine enamel specimens were distributed among the five types of beverages (n=15), according to a randomized complete block design. For the formation of erosive wear lesions, the specimens were immersed in 10 mL aqueous solution of hydrochloric acid 0.01 M for 2 min. Subsequently, the specimens were immersed in 20 mL of the beverages for 1 min, twice daily for 2 days at room temperature. In between, the specimens were kept in 20 mL of artificial saliva at 37ºC. The response variable was the quantitative enamel microhardness. ANOVA and Tukey's test showed highly significant differences (penamel exposed to hydrochloric acid and beverages. The soft drink caused a significantly higher decrease in microhardness compared with the other beverages. The black tea caused a significantly higher reduction in microhardness than the mineral water, UHT milk and soymilk, but lower than the soft drink. Among the analyzed beverages, the soft drink and the black tea caused the most deleterious effects on dental enamel microhardness.

  9. Removing hydrochloric acid exhaust products from high performance solid rocket propellant using aluminum-lithium alloy

    Energy Technology Data Exchange (ETDEWEB)

    Terry, Brandon C., E-mail: terry13@purdue.edu [School of Aeronautics and Astronautics, Purdue University, Zucrow Laboratories, 500 Allison Rd, West Lafayette, IN 47907 (United States); Sippel, Travis R. [Department of Mechanical Engineering, Iowa State University, 2025 Black Engineering, Ames, IA 50011 (United States); Pfeil, Mark A. [School of Aeronautics and Astronautics, Purdue University, Zucrow Laboratories, 500 Allison Rd, West Lafayette, IN 47907 (United States); Gunduz, I.Emre; Son, Steven F. [School of Mechanical Engineering, Purdue University, Zucrow Laboratories, 500 Allison Rd, West Lafayette, IN 47907 (United States)

    2016-11-05

    Highlights: • Al-Li alloy propellant has increased ideal specific impulse over neat aluminum. • Al-Li alloy propellant has a near complete reduction in HCl acid formation. • Reduction in HCl was verified with wet bomb experiments and DSC/TGA-MS/FTIR. - Abstract: Hydrochloric acid (HCl) pollution from perchlorate based propellants is well known for both launch site contamination, as well as the possible ozone layer depletion effects. Past efforts in developing environmentally cleaner solid propellants by scavenging the chlorine ion have focused on replacing a portion of the chorine-containing oxidant (i.e., ammonium perchlorate) with an alkali metal nitrate. The alkali metal (e.g., Li or Na) in the nitrate reacts with the chlorine ion to form an alkali metal chloride (i.e., a salt instead of HCl). While this technique can potentially reduce HCl formation, it also results in reduced ideal specific impulse (I{sub SP}). Here, we show using thermochemical calculations that using aluminum-lithium (Al-Li) alloy can reduce HCl formation by more than 95% (with lithium contents ≥15 mass%) and increase the ideal I{sub SP} by ∼7 s compared to neat aluminum (using 80/20 mass% Al-Li alloy). Two solid propellants were formulated using 80/20 Al-Li alloy or neat aluminum as fuel additives. The halide scavenging effect of Al-Li propellants was verified using wet bomb combustion experiments (75.5 ± 4.8% reduction in pH, ∝ [HCl], when compared to neat aluminum). Additionally, no measurable HCl evolution was detected using differential scanning calorimetry coupled with thermogravimetric analysis, mass spectrometry, and Fourier transform infrared absorption.

  10. Inhibition of Mild Steel Corrosion in Hydrochloric Acid Solution by Ciprofloxacin Drug

    Directory of Open Access Journals (Sweden)

    Inemesit A. Akpan

    2013-01-01

    Full Text Available The inhibition of mild steel corrosion in hydrochloric acid solution by ciprofloxacin drug as an eco-friendly and commercially available inhibitor was studied at room temperature by weight loss technique. It was found that the test drug has a promising inhibitory action against corrosion of mild steel in the medium investigated. The inhibition efficiency was found to increase with a corresponding increase in the concentration of the inhibitor. It was also found that the adsorption as well as the inhibition process followed a first-order kinetics and obeyed Langmuir’s adsorption isotherm.

  11. Effect of molecular structure of aniline-formaldehyde copolymers on corrosion inhibition of mild steel in hydrochloric acid solution.

    Science.gov (United States)

    Zhang, Yan; Nie, Mengyan; Wang, Xiutong; Zhu, Yukun; Shi, Fuhua; Yu, Jianqiang; Hou, Baorong

    2015-05-30

    Aniline-formaldehyde copolymers with different molecular structures have been prepared and investigated for the purpose of corrosion control of mild steel in hydrochloric acid. The copolymers were synthesized by a condensation polymerization process with different ratios of aniline to formaldehyde in acidic precursor solutions. The corrosion inhibition efficiency of as-synthesized copolymers for Q235 mild steel was investigated in 1.0 mol L(-1) hydrochloric acid solution by weight loss measurement, potentiodynamic polarization, and electrochemical impedance spectroscopy, respectively. All the results demonstrate that as-prepared aniline-formaldehyde copolymers are efficient mixed-type corrosion inhibitors for mild steels in hydrochloric acid. The corrosion inhibition mechanism is discussed in terms of the role of molecular structure on adsorption of the copolymers onto the steel surface in acid solution.

  12. Recovery of Co(Ⅱ) and Ni(Ⅱ) from hydrochloric acid solution of alloy scrap

    Institute of Scientific and Technical Information of China (English)

    SHEN Yong-feng; XUE Wen-ying; NIU Wen-yong

    2008-01-01

    A hydrometallurgical process was developed for recovery of nickel and cobalt from the hydrochloric acid leaching solution of alloy scraps. The process consists of five major unit operations: 1) leaching with 6 mol/L hydrochloric acid under the L/S ratio of 10:1 at 95 ℃ for 3 h; 2) copper replacement by iron scraps under pH value of 2.0 at 80 ℃, and stirring for 1 h; 3) removal of iron and chromium by chemical precipitation: iron removal under pH value of 2.0 at 90 ℃ by dropwise addition of sodium chlorate and 18% sodium carbonate solution, then chromium removal under pH value of 4.0 at 70 ℃ by addition of nickel carbonate solution, stirred by air flow for 2 h; 4) selective separation of cobalt from nickel by extraction using 30% trialkyl amine+50% kerosene (volume fraction) and tri-n-butylphosphate (TBP) as a phase modifier with the O/A ratio of 2:1, and stripping of cobalt with 0.01 mol/L HC1; 5) crystallization of nickel chloride and electrodeposition of cobalt. It is found that the nickel recovery of 95% and the cobalt recovery of approximately 60% with purity over 99.9% are obtained by this process.

  13. Kinetic Aspects of Leaching Zinc from Waste Galvanizing Zinc by Using Hydrochloric Acid Solutions

    Science.gov (United States)

    Sminčáková, Emília; Trpčevská, Jarmila; Pirošková, Jana

    2017-10-01

    In this work, the results of acid leaching of flux skimmings coming from two plants are presented. Sample A contained two phases, Zn(OH)Cl and NH4Cl. In sample B, the presence of three phases, Zn5(OH)8Cl2·H2O, (NH4)2(ZnCl4) and ZnCl2(NH3)2, was proved. The aqueous solution of hydrochloric acid and distilled water was used as the leaching medium. The effects of the leaching time, temperature and concentration of the leaching medium on the zinc extraction were investigated. The apparent activation energy, E a = 4.61 kJ mol-1, and apparent reaction order n = 0.18 for sample A, and the values E a = 6.28 kJ mol-1 and n = 0.33 for sample B were experimentally determined. Zinc leaching in acid medium is a diffusion-controlled process.

  14. Kinetic Aspects of Leaching Zinc from Waste Galvanizing Zinc by Using Hydrochloric Acid Solutions

    Science.gov (United States)

    Sminčáková, Emília; Trpčevská, Jarmila; Pirošková, Jana

    2016-10-01

    In this work, the results of acid leaching of flux skimmings coming from two plants are presented. Sample A contained two phases, Zn(OH)Cl and NH4Cl. In sample B, the presence of three phases, Zn5(OH)8Cl2·H2O, (NH4)2(ZnCl4) and ZnCl2(NH3)2, was proved. The aqueous solution of hydrochloric acid and distilled water was used as the leaching medium. The effects of the leaching time, temperature and concentration of the leaching medium on the zinc extraction were investigated. The apparent activation energy, E a = 4.61 kJ mol-1, and apparent reaction order n = 0.18 for sample A, and the values E a = 6.28 kJ mol-1 and n = 0.33 for sample B were experimentally determined. Zinc leaching in acid medium is a diffusion-controlled process.

  15. Direct Spectroscopic Determination of Europium(Ⅱ) Concentration During Europium(Ⅲ) Electro-Reduction in Hydrochloric Acid Medium

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    UV-Vis spectroscopy was used to directly determine the concentration of Eu(Ⅱ) during electroreduction of Eu(Ⅲ) in hydrochloric acid medium. Electroreduction was carried out in a flow type electrolyzer with glassy carbon cathode at the constant potential of -800 mV vs. Ag/AgCl. The effects of oxygen and concentration of hydrochloric acid on the system were investigated. For 0.01 mol·L-1 hydrochloric acid, calibration curves for Eu(Ⅱ) absorption bands at 248 and 320 nm were constructed. Molar absorption coefficients were estimated to be 2016 and 648 L·mol-1·cm-1, respectively. The absorbance strongly decreased with decrease in pH of the solution, whereas concentration of chloride had only a negligible effect.

  16. The Comparison of Hydrochloric Acid and Phosphoric Acid Treatments in the Preparation of Montmorillonite Catalysts for RNA Synthesis

    Science.gov (United States)

    Aldersley, Michael Frank; Joshi, Prakash C.; Huang, Yixing

    2017-02-01

    The treatment of clay minerals with a preliminary acid wash and titration to pH 7 has proven to generate catalysts for the most interesting of oligomerization reactions in which activated RNA-nucleotides generate oligomers up to 40-mers. Significantly, not all clay minerals become catalytic following this treatment and none are catalytic in the absence of such treatment. The washing procedure has been modified and explored further using phosphoric acid and the outcomes are compared to those obtained when clay samples are prepared following a hydrochloric acid wash.

  17. Analysis of twenty phenolic compounds in human urine: hydrochloric acid hydrolysis, solid-phase extraction based on K2CO 3-treated silica, and gas chromatography tandem mass spectrometry.

    Science.gov (United States)

    Lu, Dasheng; Feng, Chao; Wang, Dongli; Lin, Yuanjie; Ip, Ho Sai Simon; She, Jianwen; Xu, Qian; Wu, Chunhua; Wang, Guoquan; Zhou, Zhijun

    2015-05-01

    This study developed a new method for the analysis of 20 phenolic compounds in human urine. The urine samples were prepared by hydrochloric acid (HCl) hydrolysis, liquid-liquid extraction (LLE), and solid-phase extraction (SPE) cleanup. We found that HCl hydrolysis is of similar effectiveness to, and much cheaper than, the traditional enzymatic method. Vanillic acid was co-eluted with butyl paraben and interfered with the determination of butyl paraben in urine. K2CO3-treated-silica-gel SPE was designed to efficiently eliminate interference from the endogenous organic acids (especially vanillic acid) in urine. After derivatization, the samples were analyzed by large-volume-injection gas chromatography-tandem mass spectrometry (LVI-GC-MS-MS). Good linearity (R (2) ≥ 0.996) was established in the range 0.1-100 ng mL(-1) for all analytes. Method detection limits (MDLs) were 0.7-9.8 pg mL(-1). Intraday (n = 5) and interday (n = 5 days) validation was performed, with satisfactory accuracy (recovery: 70-126 % and 73-107 %, respectively) and precision (RSD ≤ 19 %) at two levels (low: 0.1 and 0.5 ng mL(-1); high: 5 and 10 ng mL(-1)). The method was used in a population study and achieved more than 85 % detection for most analytes; mean analyte concentrations were in the range 0.01-185 ng mL(-1). The method is suitable for the analysis of multiple phenolic metabolites in human urine.

  18. Integrated Computational and Experimental Protocol for Understanding Rh(III) Speciation in Hydrochloric and Nitric Acid Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Samuels, Alex C.; Boele, Cherilynn A.; Bennett, Kevin T.; Clark, Sue B.; Wall, Nathalie; Clark, Aurora E.

    2014-12-01

    A combined experimental and theoretical approach has investigated the complex speciation of Rh(III) in hydrochloric and nitric acid media, as a function of acid concentration. This has relevance to the separation and isolation of Rh(III) from dissolved spent nuclear fuel, which is an emergent and attractive alternative source of platinum group metals, relative to traditional mining efforts.

  19. EDTA and hydrochloric acid effects on mercury accumulation by Lupinus albus.

    Science.gov (United States)

    Rodríguez, Luis; Alonso-Azcárate, Jacinto; Villaseñor, José; Rodríguez-Castellanos, Laura

    2016-12-01

    The efficiency of white lupine (Lupinus albus) to uptake and accumulate mercury from a soil polluted by mining activities was assessed in a pot experiment with chemically assisted phytoextraction. The mobilizing agents tested were ethylenediaminetetracetic acid (EDTA) and hydrochloric acid (HCl). Two doses of each amendment were used (0.5 and 1.0 g of amendment per kg of soil), and unamended pots were used as a control. Addition of HCl to the soil did not negatively affect plant biomass, while the use of EDTA led to a significant decrease in plant growth when compared to that found for non-treated pots, with plants visually showing symptoms of toxicity. The addition of hydrochloric acid increased root, shoot and total plant Hg uptake of white lupine by 3.7 times, 3.1 times and 3.5 times, respectively, in relation to non-amended plants. The greatest efficiency was obtained for the highest HCl dose. EDTA led to higher concentrations of total plant Hg than that found with the control, but, due to the aforementioned decrease in plant biomass, the Hg phytoextraction yield was not significantly increased. These results were attributed to the capability of both amendments to form stable Hg complexes. The concentration of Hg in the water of the soil pores after the phytoextraction experiment was very low for all treatments, showing that risks derived from metal leaching could be partially avoided by using doses and chemicals suitable to the concentration of metal in the soil and plant performance.

  20. Anomalous spin polarization in the photoreduction of chromone-2-carboxylic acid with alcohol induced by hydrochloric acid

    Science.gov (United States)

    Ohara, Keishi; Mukai, Kazuo

    2000-02-01

    The addition effect of hydrochloric acid (HCl) on the photoreduction of chromone-2-carboxylic acid (CRCA) is studied by time-resolved EPR. The EPR lines of CRCA ketyl radical show an enhanced absorption in the presence of HCl, while without HCl these show an emissive character. On the other hand, the lines of the CRCA alkyl type radical show an emissive character whether HCl is included or not. The simultaneous reactions of the closely-lying two excited triplet states (T 1 and T 2) of CRCA may induce the above anomalous CIDEP behavior.

  1. Comparison of sulfuric and hydrochloric acids as catalysts in hydrolysis of Kappaphycus alvarezii (cottonii).

    Science.gov (United States)

    Meinita, Maria Dyah Nur; Hong, Yong-Ki; Jeong, Gwi-Taek

    2012-01-01

    In this study, hydrolysis of marine algal biomass Kappaphhycus alvarezii using two different acid catalysts was examined with the goal of identifying optimal reaction conditions for the formation of sugars and by-products. K. alvarezii were hydrolyzed by autoclave using sulfuric acid or hydrochloric acid as catalyst with different acid concentrations (0.1-1.0 M), substrate concentrations (1.0-13.5%), hydrolysis time (10-90 min) and hydrolysis temperatures (100-130 (°)C). A difference in galactose, glucose, reducing sugar and total sugar content was observed under the different hydrolysis conditions. Different by-product compounds such as 5-hydroxymethylfurfural and levulinic acid were also observed under the different reaction conditions. The optimal conditions for hydrolysis were achieved at a sulfuric acid concentration, temperature and reaction time of 0.2 M, 130 °C and 15 min, respectively. These results may provide useful information for the development of more efficient systems for biofuel production from marine biomass.

  2. Detection of anhydrous hydrochloric acid, HCl, in IRC+10216 with the Herschel SPIRE and PACS spectrometers

    CERN Document Server

    Cernicharo, J; Barlow, M J; Agundez, M; Royer, P; Vandenbussche, B; Wesson, R; Polehampton, E T; De Beck, E; Blommaert, J A D L; Daniel, F; De Meester, W; Exter, K M; Feuchtgruber, H; Gear, W K; Goicoechea, J R; Gomez, H L; Groenewegen, M A T; Hargrave, P C; Huygen, R; Imhof, P; Ivison, R J; Jean, C; Kerschbaum, F; Leeks, S J; Lim, T L; Matsuura, M; Olofsson, G; Posch, T; Regibo, S; Savini, G; Sibthorpe, B; Swinyard, B M; Vandenbussche, B; Waelkens, C

    2010-01-01

    We report on the detection of anhydrous hydrochloric acid (hydrogen chlorine, HCl) in the carbon-rich star IRC+10216 using the spectroscopic facilities onboard the Herschel satellite. Lines from J=1-0 up to J=7-6 have been detected. From the observed intensities, we conclude that HCl is produced in the innermost layers of the circumstellar envelope with an abundance relative to H2 of 5x10^-8 and extends until the molecules reach its photodissociation zone. Upper limits to the column densities of AlH, MgH, CaH, CuH, KH, NaH, FeH, and other diatomic hydrides have also been obtained.

  3. Hydrochloric acid recovery from rare earth chloride solutions by vacuum membrane distillation

    Institute of Scientific and Technical Information of China (English)

    TANG Jianjun; ZHOU Kanggen

    2006-01-01

    The possibility of the recovery of hydrochloric acid from rare earth (RE) chloride solutions was first experimentally studied by batch vacuum membrane distillation (VMD). The recovery by continuous VMD was also studied to devise methods that enabled the operation of VMD setup in a stable condition as well as to increase the membrane-operating life The results indicated that HCl separation with RE by VMD was possible, and the recovery ratio of 80% could be achieved by batch VMD. In continuous VMD, when the temperature of circular solutions, circular rate, and downstream pressure was62-63℃, 5.4 cm/s, and 9.33 kPa, respectively, the HCl concentration in circular solutions and the processing capacity per membrane area were obtained. The mathematical results were in accordance with the experimental ones.

  4. Use of hydrochloric acid for determinining solid-phase arsenic partitioning in sulfidic sediments.

    Science.gov (United States)

    Wilkin, Richard T; Ford, Robert G

    2002-11-15

    We examined the use of room-temperature hydrochloric acid (1-6 M) and salt solutions of magnesium chloride, sodium carbonate, and sodium sulfide for the removal of arsenic from synthetic iron monosulfides and contaminated sediments containing acid-volatile sulfides (AVS). Results indicate that acid-soluble arsenic reacts with H2S released from AVS phases and precipitates at low pH as disordered orpiment or alacranite. Arsenic sulfide precipitation is consistent with geochemical modeling in that conditions during acid extraction are predicted to be oversaturated with respect to orpiment, realgar, or both. Binding of arsenic with sulfide at low pH is sufficiently strong that 6 M HCl will not keep spiked arsenic in the dissolved fraction. Over a wide range of AVS concentrations and molar [As]/[AVS] ratios, acid extraction of arsenic from sulfide-bearing sediments will give biased results that overestimate the stability or underestimate the bioavailability of sediment-bound arsenic. Alkaline solutions of sodium sulfide and sodium carbonate are efficient in removing arsenic from arsenic sulfides and mixed iron-arsenic sulfides because of the high solubility of arsenic at alkaline pH, the formation of stable arsenic complexes with sulfide or carbonate, or both.

  5. 304 Cu抗菌不锈钢盐酸基酸洗工艺的研究%Research on hydrochloric acid-based pickling process of 304Cu antibacterial stainless steel

    Institute of Scientific and Technical Information of China (English)

    王冬; 邹德宁; 韩英; 薛清连

    2016-01-01

    为了明确盐酸基酸洗液对含Cu抗菌不锈钢表面氧化层的酸洗行为,采用正交试验法研究以盐酸为基础,Fe3+、H2 O2和HNO3为氧化剂的304Cu抗菌不锈钢酸洗工艺.并运用扫描电镜、透射电镜及电化学等手段分析经最佳配方酸洗后试样的表面形貌、成分及酸洗机理.结果表明:最佳酸洗工艺配方为HCl (36%~38%)120 ml/L、H2O2(30%)80 ml/L、FeCl3·6H2 O 20g/L、HNO310 ml/L,酸洗温度30℃,酸洗时间15 min.经该配方酸洗后材料表面平整度和光亮度较好,具有抗菌性能的点状ε-Cu相在基体上弥散分布.材料经酸洗去除氧化层后,仍具有足够含量的抗菌元素Cu存在.酸洗脱除氧化层过程由电荷传递过程控制,该酸洗液对不锈钢具有孔蚀诱导性,酸洗时间不宜过长.%In order to clarify pickling process of hydrochloric acid lotion against Cu⁃contained surface oxide layer of antibacterial stainless steel, the pickling process of 304Cu antibacterial stainless steel by using Fe3+, H2 O2 and HNO3 as the oxidants and taking hydrochloric acid as basis was studied by orthogonal experiment. And the surface morphology, composition and pickling mechanism of samples were analyzed by scanning electron microscopy, transmission electron microscopy and electrochemical after the best recipe pickling. The results show that the best pickling recipe is HCl (36%~38%) 120 ml/L, H2O2(30%) 80 ml/L, FeCl3· 6H2 O 20 g/L , HNO3 10 ml/L, pickling temperature is 30 ℃ and pickling for 15 min. The flatness and brightness of material surface are better after pickling, and antimicrobial properties of dot ε-Cu phase is dispersed on the substrate. After pickling to remove oxide layer of material, it still has enough content of antibacterial element Cu. Pickling process of removing oxide layer is controlled by the charge transfer process, the pickling solution of stainless steel with pitting corrosion

  6. Cellulose acetate layer effect toward aluminium corrosion rate in hydrochloric acid media

    Science.gov (United States)

    Andarany, K. S.; Sagir, A.; Ahmad, A.; Deni, S. K.; Gunawan, W.

    2017-09-01

    Corrosion occurs due to the oxidation and reduction reactions between the material and its environment. The oxidation reaction defined as reactions that produce electrons and reduction is between two elements that bind the electrons. Corrosion cannot be inevitable in life both within the industry and household. Corrosion cannot eliminate but can be control. According to the voltaic table, Aluminum is a metal that easily corroded. This study attempts to characterize the type of corrosion by using a strong acid media (HCl). Experiment using a strong acid (HCl), at a low concentration that occurs is pitting corrosion, whereas at high concentrations that occurs is corrosion erosion. One of prevention method is by using a coating method. An efforts are made to slow the rate of corrosion is by coating the metal with “cellulose acetate” (CA). cellulose acetate consisted of cellulose powder dissolved in 99% acetic acid, and then applied to the aluminum metal. Soaking experiments using hydrochloric acid, cellulose acetate is able to slow down the corrosion rate of 47 479%.

  7. Extraction of gold from hydrochloric acid solutions by Alamine 336 and Alkylaniline

    Directory of Open Access Journals (Sweden)

    Natalya Dolgova

    2013-09-01

    Full Text Available The extraction of gold with 336 Alamin and Alkylaniline from hydrochloric acid solutions was studied. Shown that Alamin extracts gold quantitatively in the field of acidity of the aqueuous phase pH=3,0 – СHCl=3,5 M when used as diluents of kerosene and higher carboxylic acids in admixture with paraffin. The time of quantitative extraction of gold: with Alamin – 3 minutes, with Alkylaniline – 5 minutes, regardless of the choice of diluent. The composition of the extracted complex and scheme of  gold extraction process with Alamin was proposed. Extraction of gold with 5%- Alamin-HCA-paraffin can be used for development of a combined extraction -  X-ray fluorescence technique for determination of gold because the resulting solids extracts meet the requirements imposed on emitters samples in X-ray fluorescence analysis. Calibration characteritstic is linear in the range of gold content in the samples emitters 0,006-0,17 wt%.

  8. Enhanced Blood Compatibility of Metallocene Polyethylene Subjected to Hydrochloric Acid Treatment for Cardiovascular Implants

    Directory of Open Access Journals (Sweden)

    Saravana Kumar Jaganathan

    2014-01-01

    Full Text Available Blood compatibility of metallocene polyethylene (mPE was investigated after modifying the surface using hydrochloric acid. Contact angle of the mPE exposed to HCl poses a decrease in its value which indicates increasing wettability and better blood compatibility. Surface of mPE analyzed by using FTIR revealed no significant changes in its functional groups after treatment. Furthermore, scanning electron microscope images supported the increasing wettability through the modifications like pit formations and etching on the acid rendered surface. To evaluate the effect of acid treatment on the coagulation cascade, prothrombin time (PT and activated partial thromboplastin time (APTT were measured. Both PT and APTT were delayed significantly (P<0.05 after 60 min exposure implying improved blood compatibility of the surfaces. Hemolysis assay of the treated surface showed a remarkable decrease in the percentage of lysis of red blood cells when compared with untreated surface. Moreover, platelet adhesion assay demonstrated that HCl exposed surfaces deter the attachment of platelets and thereby reduce the chances of activation of blood coagulation cascade. These results confirmed the enhanced blood compatibility of mPE after HCl exposure which can be utilized for cardiovascular implants like artificial vascular prostheses, implants, and various blood contacting devices.

  9. Quantitative Leaching of a Spent Cell Phone Printed Circuit Board by Hydrochloric acid

    Directory of Open Access Journals (Sweden)

    Alafara A. Baba

    2014-07-01

    Full Text Available This paper presents a kinetic data on the hydrometallurgical recovery of some metal ions from a printed circuit board (PCB of a spent cell phone by hydrochloric acid leaching. The effects of acid concentration, temperature and particle diameter on the dissolution efficiency at various leaching time intervals were examined. The results of the leaching investigations showed that the powdered cell phone dissolution increases with increasing acid concentration, system temperature with decreasing particle diameter at 360 rpm. With 2M HCl solution, about 88.49% of the sample was dissolved within 120 minutes using 0.075-0.112 mm particle diameter at 800 C. The results of the study indicated that the dissolution reaction could be represented by a shrinking core model with surface chemical reaction. A value of 0.61, 60.67 kJ/mol and 12.9s-1 were calculated as reaction order, activation energy and frequency factor, respectively for the dissolution process.

  10. Surface chemical compositions and dispersity of starch nanocrystals formed by sulfuric and hydrochloric acid hydrolysis.

    Science.gov (United States)

    Wei, Benxi; Xu, Xueming; Jin, Zhengyu; Tian, Yaoqi

    2014-01-01

    Surface chemical compositions of starch nanocrystals (SNC) prepared using sulfuric acid (H2SO4) and hydrochloric acid (HCl) hydrolysis were analyzed by X-ray photoelectron spectroscopy (XPS) and FT-IR. The results showed that carboxyl groups and sulfate esters were presented in SNC after hydrolysis with H2SO4, while no sulfate esters were detected in SNC during HCl-hydrolysis. TEM results showed that, compared to H2SO4-hydrolyzed sample, a wider size distribution of SNC prepared by HCl-hydrolysis were observed. Zeta-potentials were -23.1 and -5.02 mV for H2SO4- and HCl-hydrolyzed SNC suspensions at pH 6.5, respectively. Nevertheless, the zeta-potential values decreased to -32.3 and -10.2 mV as the dispersion pH was adjusted to 10.6. After placed 48 h at pH 10.6, zeta-potential increased to -24.1 mV for H2SO4-hydrolyzed SNC, while no change was detected for HCl-hydrolyzed one. The higher zeta-potential and relative small particle distribution of SNC caused more stable suspensions compared to HCl-hydrolyzed sample.

  11. Surface chemical compositions and dispersity of starch nanocrystals formed by sulfuric and hydrochloric acid hydrolysis.

    Directory of Open Access Journals (Sweden)

    Benxi Wei

    Full Text Available Surface chemical compositions of starch nanocrystals (SNC prepared using sulfuric acid (H2SO4 and hydrochloric acid (HCl hydrolysis were analyzed by X-ray photoelectron spectroscopy (XPS and FT-IR. The results showed that carboxyl groups and sulfate esters were presented in SNC after hydrolysis with H2SO4, while no sulfate esters were detected in SNC during HCl-hydrolysis. TEM results showed that, compared to H2SO4-hydrolyzed sample, a wider size distribution of SNC prepared by HCl-hydrolysis were observed. Zeta-potentials were -23.1 and -5.02 mV for H2SO4- and HCl-hydrolyzed SNC suspensions at pH 6.5, respectively. Nevertheless, the zeta-potential values decreased to -32.3 and -10.2 mV as the dispersion pH was adjusted to 10.6. After placed 48 h at pH 10.6, zeta-potential increased to -24.1 mV for H2SO4-hydrolyzed SNC, while no change was detected for HCl-hydrolyzed one. The higher zeta-potential and relative small particle distribution of SNC caused more stable suspensions compared to HCl-hydrolyzed sample.

  12. Impact of α-amylase combined with hydrochloric acid hydrolysis on structure and digestion of waxy rice starch.

    Science.gov (United States)

    Li, Hongyan; Zhu, Yanqiao; Jiao, Aiquan; Zhao, Jianwei; Chen, Xiaoming; Wei, Benxi; Hu, Xiuting; Wu, Chunsen; Jin, Zhengyu; Tian, Yaoqi

    2013-04-01

    The structure and in vitro digestibility of native waxy rice starch by the combined hydrolysis of α-amylase and hydrochloric acid were investigated in this study. The combined hydrolysis technique generated higher hydrolysis rate and extent than the enzymatic hydrolysis. The granular appearance and chromatograph profile demonstrated that α-amylase and hydrochloric acid exhibited different patterns of hydrolysis. The rise in the ratio of absorbance 1047/1022cm(-1), the melting temperature range (Tc-To), and the melting enthalpy (ΔH) were observed during the combined hydrolysis. These results suggest that α-amylase simultaneously cleaves the amorphous and crystalline regions, whereas the amorphous regions of starch granules are preferentially hydrolyzed during the acid hydrolysis. Furthermore, the combined hydrolysis increased rapidly digestible starch (RDS) while decreased slowly digestible starch (SDS) and resistant starch (RS), indicating that the hydrolysis mode affected the digestion property of native waxy rice starch.

  13. Thermal decomposition of ethylenediaminetetraacetic acid in the presence of 1,2-phenylenediamine and hydrochloric acid

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Jingwen [Yancheng Institute of Technology, Yancheng (China); Gao, Jinhao [Nanjing Univ., Nanjing (China). Coordination Chemistry Institute. State Key Lab. of Coordination Chemistry; Wang, Xiaoyong [Nanjing Univ., Nanjing (China). School of Life Science. State Key Lab. of Pharmaceutical Biotechnology]. E-mail: boxwxy@nju.edu.cn

    2006-09-15

    Based on the reaction products of ethylenediaminetetraacetic acid (EDTA) with 1,2- phenylenediamine (o-PDA), a novel thermal decomposition pathway of EDTA is proposed. The strong acidic medium and the presence of o-PDA facilitate the decomposition of EDTA as evidenced by the relatively lower reaction temperature. In addition to the steps described in literatures, rearrangement process is involved in the decomposition reaction. The rearranged intermediates condense with o-PDA, forming an unexpected biologically active compound 2,2,4- trimethyl-3H-5-hydro-1,5-benzodiazepine, thus provides the possibility to explore an alternative decomposition mechanism for this widely used chelator. (author)

  14. Effect of foods and drinks on primary tooth enamel after erosive challenge with hydrochloric acid.

    Science.gov (United States)

    Mesquita-Guimarães, Késsia Suênia Fidelis de; Scatena, Camila; Borsatto, Maria Cristina; Rodrigues-Júnior, Antonio Luiz; Serra, Mônica Campos

    2015-01-01

    The aim of this study was to evaluate the effect of industrialised foods and drinks on primary tooth enamel previously eroded with hydrochloric acid (HCl). The crowns of one hundred two specimens were subjected to an erosive challenge with HCl and randomly divided into six groups (n = 17): Chocolate Milk (Toddynho® - Pepsico) - negative control; Petit Suisse Yogurt (Danoninho® - Danone); Strawberry Yogurt (Vigor); Apple puree (Nestlé); Fermented Milk (Yakult® - Yakult); and Home Squeezed Style Orange Juice (del Valle) - positive control. The 28-day immersion cycles for the test products were performed twice daily and were interspersed with exposure of the test substrate to artificial saliva. Measurements of enamel surface microhardness (SMH) were performed initially, after immersion in HCl and at 7, 14, 21 and 28 days of experimentation. A two-way ANOVA, according to a split-plot design, followed by the sum of squares decomposition and Tukey's test, revealed a significant effect for the interaction between Foods and Drinks and Length of Exposure (p < 0.00001). Orange juice resulted in greater mineral loss of enamel after 28 days. None of the test products was associated with recovery of tooth enamel microhardness.

  15. Two pyrazine derivatives as inhibitors of the cold rolled steel corrosion in hydrochloric acid solution

    Energy Technology Data Exchange (ETDEWEB)

    Deng Shuduan, E-mail: dengshuduan@163.co [Faculty of Wood Science and Decoration Technology, Southwest Forestry University, Kunming 650224 (China); Li Xianghong; Fu Hui [Department of Fundamental Courses, Southwest Forestry University, Kunming 650224 (China)

    2011-02-15

    Research highlights: Two pyrazine derivatives of 2-aminopyrazine (AP) and 2-amino-5-bromopyrazine (ABP) are good inhibitors for the corrosion of steel in 1.0 M HCl solution. The inhibition efficiency follows the order: ABP > AP. The substitution Br of ABP is the additional centre of adsorption and increases the electron density of pyrazine ring, which can facilitate its adsorption on the metal surface. For either ABP or AP, the adsorption obeys Langmuir adsorption isotherm. Both ABP and AP act as mixed-type inhibitors. - Abstract: The inhibition effect of two pyrazine derivatives of 2-aminopyrazine (AP) and 2-amino-5-bromopyrazine (ABP) on the corrosion of cold rolled steel (CRS) in 1.0 M hydrochloric acid (HCl) was studied by weight loss, potentiodynamic polarization curves, and electrochemical impedance spectroscopy (EIS) methods. The results show that both AP and ABP are good inhibitors, and inhibition efficiency follows the order: ABP > AP. The adsorption of each inhibitor on CRS surface obeys Langmuir adsorption isotherm. Potentiodynamic polarization curves show that two pyrazine derivatives act as mixed-type inhibitors. EIS spectra exhibit one capacitive loop and confirm the inhibitive ability.

  16. Effect of foods and drinks on primary tooth enamel after erosive challenge with hydrochloric acid

    Directory of Open Access Journals (Sweden)

    Késsia Suênia Fidelis de MESQUITA-GUIMARÃES

    2015-01-01

    Full Text Available The aim of this study was to evaluate the effect of industrialised foods and drinks on primary tooth enamel previously eroded with hydrochloric acid (HCl. The crowns of one hundred two specimens were subjected to an erosive challenge with HCl and randomly divided into six groups (n = 17: Chocolate Milk (Toddynho® - Pepsico - negative control; Petit Suisse Yogurt (Danoninho® - Danone; Strawberry Yogurt (Vigor; Apple puree (Nestlé; Fermented Milk (Yakult® - Yakult; and Home Squeezed Style Orange Juice (del Valle - positive control. The 28-day immersion cycles for the test products were performed twice daily and were interspersed with exposure of the test substrate to artificial saliva. Measurements of enamel surface microhardness (SMH were performed initially, after immersion in HCl and at 7, 14, 21 and 28 days of experimentation. A two-way ANOVA, according to a split-plot design, followed by the sum of squares decomposition and Tukey’s test, revealed a significant effect for the interaction between Foods and Drinks and Length of Exposure (p < 0.00001. Orange juice resulted in greater mineral loss of enamel after 28 days. None of the test products was associated with recovery of tooth enamel microhardness.

  17. Heavy metal removal from sewage sludge ash by thermochemical treatment with gaseous hydrochloric acid.

    Science.gov (United States)

    Vogel, Christian; Adam, Christian

    2011-09-01

    Sewage sludge ash (SSA) is a suitable raw material for fertilizers due to its high phosphorus (P) content. However, heavy metals must be removed before agricultural application and P should be transferred into a bioavailable form. The utilization of gaseous hydrochloric acid for thermochemical heavy metal removal from SSA at approximately 1000 °C was investigated and compared to the utilization of alkaline earth metal chlorides. The heavy metal removal efficiency increased as expected with higher gas concentration, longer retention time and higher temperature. Equivalent heavy metal removal efficiency were achieved with these different Cl-donors under comparable conditions (150 g Cl/kg SSA, 1000 °C). In contrast, the bioavailability of the P-bearing compounds present in the SSA after thermal treatment with gaseous HCl was not as good as the bioavailability of the P-bearing compounds formed by the utilization of magnesium chloride. This disadvantage was overcome by mixing MgCO(3) as an Mg-donor to the SSA before thermochemical treatment with the gaseous Cl-donor. A test series under systematic variation of the operational parameters showed that copper removal is more depending on the retention time than the removal of zinc. Zn-removal was declined by a decreasing ratio of the partial pressures of ZnCl(2) and water.

  18. Direct anodic hydrochloric acid and cathodic caustic production during water electrolysis

    Science.gov (United States)

    Lin, Hui-Wen; Cejudo-Marín, Rocío; Jeremiasse, Adriaan W.; Rabaey, Korneel; Yuan, Zhiguo; Pikaar, Ilje

    2016-02-01

    Hydrochloric acid (HCl) and caustic (NaOH) are among the most widely used chemicals by the water industry. Direct anodic electrochemical HCl production by water electrolysis has not been successful as current commercially available electrodes are prone to chlorine formation. This study presents an innovative technology simultaneously generating HCl and NaOH from NaCl using a Mn0.84Mo0.16O2.23 oxygen evolution electrode during water electrolysis. The results showed that protons could be anodically generated at a high Coulombic efficiency (i.e. ≥ 95%) with chlorine formation accounting for 3 ~ 5% of the charge supplied. HCl was anodically produced at moderate strengths at a CE of 65 ± 4% together with a CE of 89 ± 1% for cathodic caustic production. The reduction in CE for HCl generation was caused by proton cross-over from the anode to the middle compartment. Overall, this study showed the potential of simultaneous HCl and NaOH generation from NaCl and represents a major step forward for the water industry towards on-site production of HCl and NaOH. In this study, artificial brine was used as a source of sodium and chloride ions. In theory, artificial brine could be replaced by saline waste streams such as Reverse Osmosis Concentrate (ROC), turning ROC into a valuable resource.

  19. Inhibition of the corrosion of mild steel in hydrochloric acid by isatin and isatin glycine

    Directory of Open Access Journals (Sweden)

    B.I. Ita

    2006-12-01

    Full Text Available The inhibition of corrosion of mild steel in hydrochloric acid by isatin glycine (ING and isatin (IN at 30-60 oC and concentrations of 0.0001 M to 0.0005 M was studied via weight loss method. At the highest inhibitor concentration studied ING exhibited inhibition efficiency of 87% while IN exhibited 84% at 60 oC. A chemical adsorption mechanism was proposed on the basis of the temperature effect and obtained average activation energy values of 143.9 kJ/mol for ING and 118.5 kJ/mol for IN. The two inhibitors were confirmed to obey the Langmuir adsorption isotherm equation at the concentrations studied. Also a first-order type of mechanism was proposed from the kinetic treatment of the result. The difference in the inhibitory properties of the inhibitors was explained in terms of the difference in their molecular structures and solubility rather than difference in molecular weights alone.

  20. Adsorption of Methylene Blue from Aqueous Solution onto Hydrochloric Acid-modified Rectorite

    Institute of Scientific and Technical Information of China (English)

    ZHANG Gaoke; LIU Guanfeng; GUO Yadan

    2011-01-01

    H+-rectorite clay,which was prepared by modifying the raw rectorite with 10% hydrochloric acid at 60 ℃C for 24 h,was used as an absorbent for removal of methyl blue (MB) from aqueous solutions.The morphology and the structure and crystallinity of the pristine rectorite and the H+-rectorite were characterized by scanning electron microscopy (SEM) technique and X-ray diffraction (XRD) technique,respectively.The results showed that the H+-rectorite exhibited high adsorption ability than the raw rectorite,and it was found that the removal percentage of MB increased with increasing in adsorbents dose,whereas the adsorption amount q,(mg/g) decreased.The equilibrium was attained within 30 min in adsorption process,and the maximum adsorption capacity of H+-rectorite for methylene blue reached as high as 37 mg/g.Besides,the effect of temperature on the adsorption of MB with H+-rectorite was investigated and the equilibrium data were well fitted to Freundlich equations.The H+-rectorite absorbent saturated with MB can be regenerated by calcinating at 400 ℃ for 2 h and the regenerated absorbent still showed higher percentage removal of MB.

  1. Eclipta Alba as Corrosion Pickling Inhibitor on Mild Steel in Hydrochloric Acid

    Institute of Scientific and Technical Information of China (English)

    M. Shyamala; A. Arulanantham

    2009-01-01

    Due to ease of application, cost effectiveness and environmentally safe, in this study, the corrosion inhibition effect of aqueous extract of Eclipta alba in 1 N hydrochloric acid has been investigated by weight loss, potentiodynamic polarization and impedance methods and the extracts of Eclipta alba were found to be effective corrosion pickling inhibitor. The effect of immersion time and temperature revealed that the extracts of Eclipta alba with an optimum concentration of 8.0% v/v showed maximum inhibition efficiency of 99.6% at 3 h immersion time and 30℃. Arrhenius plots for mild steel immersed in 1 N HCI solution in the absence and presence of optimum concentration (8.0% in v/v) of Eclipta alba extract showed the effect of temperature. Polarization studies indicate that this plant extract acts as a mixed type inhibitor. The adsorption of Eclipta alba follows Langmuir adsorption isotherm. The inhibition action may be due to the presence of the Wedelactone and also the alkaloid Ecliptine present in the leaves of Eclipta alba.

  2. Establishment of hydrochloric acid/lipopolysaccharide-induced pelvic inflammatory disease model.

    Science.gov (United States)

    Oh, Yeonsu; Lee, Jaehun; Kim, Hyeon-Cheol; Hahn, Tae-Wook; Yoon, Byung-Il; Han, Jeong-Hee; Kwon, Yong-Soo; Park, Joung Jun; Koo, Deog-Bon; Rhee, Ki-Jong; Jung, Bae Dong

    2016-09-30

    Pelvic inflammatory disease (PID), which is one of the most problematic complications experienced by women with sexually transmitted diseases, frequently causes secondary infections after reproductive abnormalities in veterinary animals. Although the uterus is self-protective, it becomes fragile during periods or pregnancy. To investigate PID, bacteria or lipopolysaccharide (LPS) extracted from gram negative bacteria has been used to induce the disease in several animal models. However, when LPS is applied to the peritoneum, it often causes systemic sepsis leading to death and the PID was not consistently demonstrated. Hydrochloric acid (HCl) has been used to induce inflammation in the lungs and stomach but not tested for reproductive organs. In this study, we developed a PID model in mice by HCl and LPS sequential intracervical (i.c.) administration. The proinflammatory cytokines, interleukin (IL)-1β, IL-6 and tumor necrosis factor-α, were detected in the mouse uterus by western blot analysis and cytokine enzyme-linked immunosorbent assay after HCl (25 mg/kg) administration i.c. followed by four LPS (50 mg/kg) treatments. Moreover, mice exhibited increased infiltration of neutrophils in the endometrium and epithelial layer. These results suggest that ic co-administration of HCl and LPS induces PID in mice. This new model may provide a consistent and reproducible PID model for future research.

  3. Studies on the inhibition of mild steel corrosion in hydrochloric acid solution by atenolol drug

    Directory of Open Access Journals (Sweden)

    G. Karthik

    2016-06-01

    Full Text Available The inhibition performance of atenolol on mild steel in 1 M hydrochloric acid solution was studied by weight loss and electrochemical methods. The results show the inhibition efficiency was found to increase with increasing the concentration of the inhibitor from 50 to 300 ppm. The maximum inhibition efficiency 93.8% was observed in the presence of 300 ppm inhibitor (in case of potentiodynamic polarization. The inhibition action of atenolol was explained in terms of adsorption on the mild steel surface. The adsorption process follows Langmuir isotherm via physical adsorption. Electrochemical Impedance spectroscopic technique (EIS exhibits one capacitive loop indicating that, the corrosion reaction is controlled by charge transfer process. Polarization measurements showed that the inhibitor is of a mixed type. The results obtained from the different methods are in good agreement. The surface morphologies of mild steel were examined by Fourier-transform infrared (FT-IR spectroscopy, scanning electron microscope (SEM. Further, the computational calculations are performed to find a relation between their electronic and structural properties.

  4. Dissolution Process of Palladium in Hydrochloric Acid: A Route via Alkali Metal Palladates

    Science.gov (United States)

    Kasuya, Ryo; Miki, Takeshi; Morikawa, Hisashi; Tai, Yutaka

    2015-12-01

    To improve the safety of the Pd recovery processes that use toxic oxidizers, dissolution of Pd in hydrochloric acid with alkali metal palladates was investigated. Alkali metal palladates were prepared by calcining a mixture of Pd black and alkali metal (Li, Na, and K) carbonates in air. Almost the entire amount of Pd was converted into Li2PdO2 after calcination at 1073 K (800 °C) using Li2CO3. In contrast, PdO was obtained by calcination at 1073 K (800 °C) using Na and K carbonates. Our results indicated that Li2CO3 is the most active reagent among the examined alkali metal carbonates for the formation of palladates. In addition, dissolution of the resulting Li2PdO2 in HCl solutions was evaluated under various conditions. In particular, Li2PdO2 rapidly dissolved in diluted (0.1 M) HCl at ambient temperature. Solubility of Pd of Li2PdO2 was found to be 99 pct or larger after dissolution treatment at 353 K (80 °C) for 5 minutes; in contrast, PdO hardly dissolved in 0.1 M HCl. The dissolution mechanism of Li2PdO2 in HCl was also elucidated by analysis of crystal structures and particulate properties. Since our process is completely free from toxic oxidizers, the dissolution process via alkali metal palladates is much safer than currently employed methods.

  5. The inhibitive effect of bipyrazolic derivatives on the corrosion of steel in hydrochloric acid solution

    Energy Technology Data Exchange (ETDEWEB)

    Tebbji, K. [Laboratoire de Chimie des Eaux et Corrosion, Faculte des Sciences, B.P. 717, Oujda (Morocco); Hammouti, B. [Laboratoire de Chimie des Eaux et Corrosion, Faculte des Sciences, B.P. 717, Oujda (Morocco); Oudda, H. [Laboratoire des Procedes de Separation, Faculte des Sciences, Kenitra (Morocco); Ramdani, A. [Laboratoire de Chimie Organique-Physique, Faculte des Sciences, B.P. 717, Oujda (Morocco); Benkadour, M. [Laboratoire de Chimie des Eaux et Corrosion, Faculte des Sciences, B.P. 717, Oujda (Morocco)

    2005-12-15

    The effect of two pyrazole-type organic compounds, namely ethyl 5,5'-dimethyl-1'H-1,3'-bipyrazole-3 carboxylate (P1) and 3,5,5'-trimethyl-1'H-1,3'-bipyrazole (P2) on the corrosion behaviour of steel in 1 M hydrochloric acid (HCl) solution is investigated at 308 K by weight loss measurements, potentiodynamic polarisation and impedance spectroscopy (EIS) methods. The inhibition efficiencies obtained from cathodic Tafel plots, gravimetric and EIS methods are in good agreement. Results obtained show that the compound P2 is the best inhibitor and its efficiency reaches 84% at 10{sup -3} M. Potentiodynamic polarisation studies show that pyrazolic derivatives are cathodic-type inhibitors and these compounds act on the cathodic reaction without changing the mechanism of the hydrogen evolution reaction. The inhibition efficiency of P2 is temperature-dependent in the range from 308 to 353 K and the associated activation energy has been determined. P2 adsorbs on the steel surface according to Langmuir adsorption model. The calculation of the total partial charge of inhibitor atoms is computed.

  6. The thermal, rheological and structural properties of cassava starch granules modified with hydrochloric acid at different temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Beninca, Cleoci; Colman, Tiago Andre Denck [State University of Ponta Grossa - UEPG, Av. Carlos Cavalcanti, 4748, ZIP 84030-900, Ponta Grossa, PR (Brazil); Lacerda, Luiz Gustavo; Filho, Marco Aurelio Silva Carvalho [Positivo University, Curitiba, PR (Brazil); Bannach, Gilbert [Paulista State University - UNESP, Bauru, SP (Brazil); Schnitzler, Egon, E-mail: egons@uepg.br [State University of Ponta Grossa - UEPG, Av. Carlos Cavalcanti, 4748, ZIP 84030-900, Ponta Grossa, PR (Brazil)

    2013-01-20

    Highlights: Black-Right-Pointing-Pointer Untreated cassava starch was modified with standard hydrochloric acid at 20 and 50 Degree-Sign C by 8 h. Black-Right-Pointing-Pointer DSC curves allowed to verify increase in the gelatinization enthalpy in agreement with high temperature. Black-Right-Pointing-Pointer Pasting properties of the studied starches were inversely proportional to the acid treatment and increased temperature. Black-Right-Pointing-Pointer The morphology of granules as well as average size and average roughness were calculated by NC-AFM. - Abstract: Starch is arguably one of the most actively investigated biopolymer in the world. In this study, the native (untreated) cassava starch granules (Manihot esculenta, Crantz) were hydrolyzed by standard hydrochloric acid solution at different temperatures (30 Degree-Sign C and 50 Degree-Sign C) and the hydrolytic transformations were investigated by the following techniques: simultaneous thermogravimetry-differential thermal analysis (TG-DTA), differential scanning calorimetry (DSC), as well as non-contact atomic force microscopy (NC-AFM), X-ray diffraction (XRD) powder patterns, and rapid viscoamylographic analysis (RVA). After the treatment with hydrochloric acid at different temperatures, the thermal stability, a gradual loss of pasting properties (viscosity), alterations in the gelatinization enthalpy ({Delta}H{sub gel}), were observed. The use of NC-AFM and XRD allowed the observation of the surface morphology and topography of the starch granules and changes in crystallinity of the granules, respectively.

  7. The Effect of Temperature and Acid Concentration on Corrosion of Low Carbon Steel in Hydrochloric Acid Media

    Directory of Open Access Journals (Sweden)

    Anees A. Khadom

    2009-01-01

    Full Text Available Problem statement: The effect of different temperatures and acid concentrations on the corrosion of low carbon steel in hydrochloric acid were addressed in this study. Approach: The effect of temperature was explained by application of Arrhenius equation and transition state theory, while the acid concentration effect was explained using reaction kinetic equations. The combined effect of temperature and acid concentration then modeled using a nonlinear regression method. Results: A detail of thermodynamic parameters of activation (E, ΔH* and ΔS* and kinetic studies for the corrosion reaction were obtained. Nonlinear corrosion rates as a function of temperature and acid concentration equation were estimated with a good prediction corrosion rates values. Conclusion: The values of activation energy E and enthalpy of activation ΔH* decrease with increase in acid concentration indicating the increasing in reaction rate. Entropy of activation ΔS* tend to lower values with increasing in acid concentration which indicated that the activated complex was more orderly relative to the initial state. The corrosion reaction was approximately firs order reaction. The observed corrosion rate values from the experimental data were in a good agreement with that predicated by the mathematical equation.

  8. Hydrochloric acid infusion for treatment of metabolic alkalosis associated with respiratory acidosis.

    Science.gov (United States)

    Brimioulle, S; Berre, J; Dufaye, P; Vincent, J L; Degaute, J P; Kahn, R J

    1989-03-01

    Hypercapnia due to respiratory failure can be more severe when accompanied by coexistent metabolic alkalosis. We therefore tested the hypothesis that hydrochloric acid (HCl) infusion could improve PaCO2 in 15 critically ill patients admitted with mixed respiratory acidosis and metabolic alkalosis, and a pH of between 7.35 and 7.45. HCl was infused at a constant rate of 25 mmol/h until the bicarbonate concentration decreased less than 26 mmol/L, or until the pH decreased less than 7.35 (initial pH greater than 7.40) or 7.30 (initial pH less than 7.40). Administration of 170 +/- 53 mmol of HCl decreased the bicarbonate concentration from 34 +/- 3 to 25 +/- 2 mmol/L (p less than .001), the pH from 7.41 +/- 0.03 to 7.33 +/- 0.02 (p less than .001), and the PaCO2 from 54 +/- 8 to 48 +/- 8 torr (p less than .001). Postinfusion PaCO2 could be predicted accurately from the initial status of the patients (r = .95, p less than .001) except in one patient with fixed hypercapnia. PaCO2 increased from 77 +/- 19 to 94 +/- 24 torr (p less than .001) and PaO2/PAO2 increased from 59 +/- 17 to 66 +/- 17% (p less than .001). The effects of HCl were still present 12 h after the end of the infusion. No complications related to the acid infusion were noted. These results indicate that, even in the absence of alkalemia, active correction of metabolic alkalosis by HCl infusion can improve CO2 and oxygen exchange in critically ill patients with mixed respiratory acidosis and metabolic alkalosis.

  9. Electrochemical and theoretical investigation on the corrosion inhibition of mild steel by thiosalicylaldehyde derivatives in hydrochloric acid solution

    Energy Technology Data Exchange (ETDEWEB)

    Behpour, M. [Department of Chemistry, Faculty of Science, University of Kashan, Kashan (Iran, Islamic Republic of)], E-mail: m.behpour@kashanu.ac.ir; Ghoreishi, S.M.; Soltani, N.; Salavati-Niasari, M.; Hamadanian, M.; Gandomi, A. [Department of Chemistry, Faculty of Science, University of Kashan, Kashan (Iran, Islamic Republic of)

    2008-08-15

    Inhibitory effect of three Schiff bases 2-{l_brace}[(2-sulfanylphenyl)imino]methyl{r_brace}]phenol (A), 2-{l_brace}[(2)-1-(4-methylphenyl)methylidene]amino{r_brace}-1-benznethiol (B), and 2-[(2-sulfanylphen-yl)ethanimidoyl)]phenol (C) on corrosion of mild steel in 15% HCl solution has been studied using weight loss measurements, polarization and electrochemical impedance spectroscopy (EIS) methods. The results of the investigation show that the compounds A and B with mean efficiency of 99% at 200 mg/L additive concentration have fairly good inhibiting properties for mild steel corrosion in hydrochloric acid, and they are as mixed inhibitor. All measurements show that inhibition efficiencies increase with increase in inhibitor concentration. This reveals that inhibitive actions of inhibitors were mainly due to adsorption on mild steel surface. Adsorption of these inhibitors follows the Langmuir adsorption isotherm. Thermodynamic adsorption parameters (K{sub ads}, {delta}G{sub ads}) of studied Schiff bases were calculated using the Langmuir adsorption isotherm. Activation parameters of the corrosion process such as activation energies, E{sub a}, activation enthalpies, {delta}H{sup *}, and activation entropies, {delta}S{sup *}, were calculated by the obtained corrosion currents at different temperatures. Obvious correlation was found between the corrosion inhibition efficiency and the calculated parameters. The obtained theoretical results have been adapted with the experimental data.

  10. Extraction of trace thorium from hydrochloric acid media by 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone

    Institute of Scientific and Technical Information of China (English)

    YANG Wei-Fan; YUAN Shuang-Gui; XU Yan-Bing; XIAO Yong-Hou; XIONG Bing

    2003-01-01

    The paper describes the solvent extraction of trace thorium from hydrochloric acid media by1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (PMBP) using a radioactive tracer technique. The percent extraction ofthorium was studied as a function of acidity, PMBP concentration and equilibrium time. The back-extraction behaviorof thorium from the organic phase was also tested. Separation of thorium was performed from fission products pro-duced in 14 MeV neutron bombardment of natural uranium by employing the PMBP extraction procedure. Thegamma-ray spectra of the separated thorium fractions show that thorium can be separated from most of fission prod-ucts and a large amount of uranium.

  11. Content Determination of Hydrochloric Acid Ephedrine and Hydrochloric Acid Pseudoephedrine inTongxuanlifei Granules%通宣理肺颗粒中麻黄碱含量测定方法研究

    Institute of Scientific and Technical Information of China (English)

    肖斯婷; 付欣彤; 常增荣

    2011-01-01

    目的 采用高效液相色谱法测定建立通宣理肺颗粒中盐酸麻黄碱与盐酸伪麻黄碱含量,建立其质量标准.方法 采用Phenomenex Synerg 4u Polar-RP 80A(250mm× 4.6mm,4 μm)色谱柱,流动相:甲醇:0.092%磷酸溶液(含0.04%三乙胺和0.02%二正丁胺)=1:99;检测波长:210 nm.结果 该法测定通宣理肺颗粒中盐酸麻黄碱3个浓度回收率分另为102.44%、100.93%、97.73%,RSD分别为1.30%、0.38%、1.77%(n=3);盐酸伪麻黄碱回收率分别为99.98%、96.01%、100.91%,RSD分别为1.65%、0.65%、1.91%(n=3).本品按标示量计算,含麻黄以盐酸麻黄碱与盐酸伪麻黄碱的总量计0.6 ~3 mg/袋.结论 本方法操作简便,结果可靠,准确,能有效地控制通宣理肺颗粒的质量.%Objective To establish the quality standard for Tongxuanlifei Granules (Hydrochloric acid ephedrine & Hydrochloric acid pseudoephedrine). Methods The contents of Hydrochloric acid ephedrine and Hydrochloric acid pseudoephedrine were determined on the Phenomenex Synerg 4u Polar-RP 80A (250 mm× 4.6 mm, 4 μm) column, with MeOH :0.092% Phosphoric acid solution (with 0.04% Triethylamine and 0.02% Two butyl amine)=l : 99 elution as mobile phase and detective wavelength at 210 nm. Results The average recovery of Hydrochloric acid ephedrine of there concentration was 102.44%, 100.93%, 97.73%, and RSD was 1.30%, 0.38%, 1.77% (n=3). The average recovery of Hydrochloric acid pseudoephedrine was 99.98%, 96.01%, 100.91%, and RSD was 1.65%, 0.65%, 1.91% (n=3). The detection quantity should be within 0.6 - 3 mg labeled weight. Conclusion The method is simple, reliable, accurate and can be applied to the quality control of Tongxuanlifei Granules.

  12. Characterization of Polyamide 66 membranes prepared by phase inversion using formic acid and hydrochloric acid such as solvents

    Directory of Open Access Journals (Sweden)

    Patrícia Poletto

    2011-12-01

    Full Text Available The membranes properties prepared from water/formic acid (FA/ polyamide 66 (PA66 and water/hydrochloric acid (HCl/polyamide 66 (PA 66 systems has been studied. The different solvents interact distinctly with the polymer, affecting the membrane morphology. The asymmetric structure of the membranes showed a dense top layer and a porous sublayer. The membranes M-HCl prepared from HCl/PA 66 system showed a larger dense layer (around 23 μm in compared to those prepared from FA/PA 66 system (M-FA (around 10 μm. The membrane morphology was a determinant factor in results of water absorption, porosity and pure water flux. The lower thickness of dense layer in M-FA membranes resulted in a higher water absorption and, consequently, porosity, approximately 50%, compared with M-HCl membranes, approximately 15%. The same trend was observed to permeate flux, the lower thickness of dense layer higher pure water flux.

  13. Modification of HZSM- 5 Zeolite by Hydrochloric Acid and Catalytic Performance of Mo - based Catalyst for Methane Dehydroaromatization Reaction%盐酸改性HZSM-5及Mo-基催化剂的MDA反应活性

    Institute of Scientific and Technical Information of China (English)

    王红霞; 赵婷婷

    2012-01-01

    采用盐酸溶液在303K对HZSM-5分子筛进行预处理,并以处理后的分子筛制备相应的Mo-基催化剂.分子筛和催化剂采用XRD和NH3-TPD等手段进行表征,利用甲烷无氧芳构化(MDA)反应评价Mo-基催化剂的催化活性.结果表明,指定实验条件下的盐酸处理在一定程度上降低了分子筛的结晶度,降低了分子筛上的B酸量,改性后的Mo-基催化剂在MDA反应中表现很好的稳定性.%The pretreatment with HC1 solution at 303 K was applied to modify HZSM -5 zeolite, and the Mobased catalysts were prepared by using the modified HZSM -5 zeolite as support and tested for catalytic performance of methane dehydroaromatization reaction. The modified Mo - based catalysts show a higher stability than that of Mo/HZSM - 5 catalyst prepared with unmodified with HZSM - 5 zeolite. The effect of acid treatment on the structure and acidity of HZSM - 5 zeolite and Mo - based catalysts were studied by XRD and NH3 - TPD methods. The results show that the acid treatment to HZSM - 5 at given experimental conditions led to a decrease in the crystallinity of HZSM -5 zeolite and the number of the Brnsted acid sites to a certain degree.

  14. The effects of pharmaceutically active compound doxycycline on the corrosion of mild steel in hydrochloric acid solution

    Energy Technology Data Exchange (ETDEWEB)

    Shukla, Sudhish Kumar [Department of Applied Chemistry, Institute of Technology, Banaras Hindu University, Varanasi 221 005, Uttar Pradesh (India); Quraishi, M.A. [Department of Applied Chemistry, Institute of Technology, Banaras Hindu University, Varanasi 221 005, Uttar Pradesh (India)], E-mail: maquraishi.apc@itbhu.ac.in

    2010-02-15

    Corrosion inhibition of mild steel in hydrochloric acid solution by doxycycline has been studied by weight loss measurements, polarization resistance, Tafel polarization and electrochemical impedance spectroscopy. The inhibitor showed more than 95% inhibition efficiency at optimum concentration 9.02 x 10{sup -4} M. Potentiodynamic polarization suggests that it is a mixed type of inhibitor. Electrochemical impedance spectroscopy was used to investigate the mechanism of corrosion inhibition. Thermodynamic parameters were calculated to investigate mechanism of inhibition. The compound follows Langmuir adsorption isotherm. AFM studies of mild steel surface with and without inhibitor were performed and calculated roughness also supported the inhibition data.

  15. Corrosion and Inhibition Effects of Mild Steel in Hydrochloric Acid Solutions Containing Organophosphonic Acid

    Directory of Open Access Journals (Sweden)

    Manish Gupta

    2013-01-01

    Full Text Available A study has been made on the mechanism of corrosion of mild steel and the effect of nitrilo trimethylene phosphonic (NTMP acid as a corrosion inhibitor in acidic medium, that is, 10% HC1 using the weight loss method and electrochemical techniques, that is, potentiodynamic and galvanostatic polarization measurements. Although corrosion is a long-time process, but it takes place at a faster rate in the beginning which goes on decreasing with due course of time. The above-mentioned methods of corrosion rate determination furnish an average value for a long-time interval. Looking at the versatility and minimum detection limit of the voltammetric method, the authors have developed a new voltammetric method for the determination of corrosion rate at short-time intervals. The results of corrosion of mild steel in 10% HC1 solution with and without NTMP inhibitor at short-time intervals have been reported. The corrosion inhibition efficiency of NTMP is 93% after 24 h.

  16. Effect of Schiff base as corrosion inhibitor on AZ31 magnesium alloy in hydrochloric acid solution%席夫碱作为缓蚀剂对盐酸溶液中AZ31镁合金的影响

    Institute of Scientific and Technical Information of China (English)

    S. THIRUGNANASELVI; S. KUTTIRANI; Amali Roseline EMELDA

    2014-01-01

    Schiff base derived from the condensation reaction of analar grade 1-amino-2-naphthol 4-sulphonic acid with cinnamaldehyde was prepared under microwave condition. The Schiff base was analysed by infrared spectroscopy. This Schiff base as a corrosion inhibitor of AZ31 magnesium alloy in 0.05 mol/L HCl solution was studied. The inhibition effect of the Schiff base compound (4Z)-4-(3-phenyl allylidene amino)-3-hydroxy naphthalene-1-sulfonic acid (AC) on AZ31 magnesium alloy corrosion was studied using mass loss, potentiodynamic polarization technique, electrochemical impedance spectroscopy methods. The potentiodynamic polarization curve shows that Schiff base AC inhibits both anodic and cathodic reactions at all concentration, which indicates it is a mixed type inhibitor. EIS results indicate that as the additive concentration is increased, the polarization resistance increases whereas double-layer capacitance decreases. The adsorption of AC on the AZ31 magnesium alloy surface in 0.05 mol/L HCl obeys the Langmuir adsorption isotherm.%在微波条件下,通过高纯度1-氨基-2萘酚4-磺酸与肉桂醛的缩合反应制备席夫碱(4Z)-4-(3-苯基烯丙叉氨基)-3-羟基萘-1-磺酸(AC)。采用红外光谱对制备的席夫碱进行分析。研究席夫碱作为缓蚀剂对AZ31镁合金在0.05 mol/L 盐酸中的缓蚀作用。通过质量损失法、动电位极化法和电化学交流阻抗谱(EIS)研究席夫碱化合物在 AZ31镁合金腐蚀过程中的抑制作用。动电位极化曲线表明:席夫碱在所有浓度下能抑制阳极和阴极反应,是一种混合型缓蚀剂。EIS结果表明:随着添加剂浓度的增加,极化电阻增加而双电层电容减少。在0.05 mol/L盐酸中,席夫碱AC对AZ31镁合金表面的吸附符合Langmuir吸附等温式。

  17. Separation of metal ions by anion exchange in mixtures of hydrochloric acid and hydrofluoric acid

    Energy Technology Data Exchange (ETDEWEB)

    Faris, J.P.

    1978-12-01

    Distribution coefficients were determined for the adsorption of more than 40 elements on anion-exchange resins from mixtures of HCl (0.1 to 12M) and HF (0.1-8M). Two resins, Dowex 1 x 10, 200 to 400 mesh and Dowex 1 x 4, 100 to 200 mesh, were used. Distribution coefficients were also determined for the adsorption of many elements on both resins from 0.1 to 12M HCl and 0.1 to 12M HF. Anion exchange in the presence of HF was found useful for separating impurities from various materials for their subsequent determination, and specific procedures used in our spectrochemical laboratory for this purpose are outlined. The results of a literature search on the use of anion exchange in hydrofluoric acid and fluoride-containing media are presented in an extensive bibliography. 404 references, 9 tables.

  18. 植物细胞有丝分裂实验中盐酸浓度对实验效果影响的研究%Effective research on different concentrations of hydrochloric acid in plant cell mitosis experiment

    Institute of Scientific and Technical Information of China (English)

    归改霞

    2015-01-01

    目的:探讨有丝分裂实验中盐酸浓度对实验效果的影响。方法:通过使用不同浓度的盐酸做为解离液进行实验,从中选取最适合的盐酸浓度,从而达到最理想的实验效果。结果:通过实验比较,解离液中盐酸的浓度为25%比较合适。结论:植物细胞有丝分裂实验,在选材、培养、取材均为最优条件下,解离液中盐酸的浓度是实验成功的关键。当盐酸的浓度为25%时,实验成功率最高,能达到最佳效果。%Objective: To investigate effects of different concentrations of hydrochloric acid in plant cell mitosis experiment. Methods: In order to achieve the best experimental results, the most suitable concentration of hydrochloric acid was selected in experiments. Results: Based on experimental comparison, concentration of hydrochloric acid of 25% in dissociation solution is suitable. Conclusion: When other conditions are the best, concentration of hydrochloric acid is the key in plant cell mitosis experiment. When concentration of hydrochloric acid was 25%, there was highest efficiency and the best result.

  19. Analysis on a cracking accident of hydrochloric acid storage tank caused by vacuum%稀盐酸储槽抽裂事故的分析

    Institute of Scientific and Technical Information of China (English)

    王欣荣

    2012-01-01

    分析了盐酸脱吸工序中稀盐酸储槽抽裂事故产生的原因;通过稀盐酸储槽的压力式液位计DCS历史曲线记录来间接分析稀盐酸储槽内压力变化情况,剖析负压的形成过程。结果表明:脱吸塔产生较大的负压是因为系统急停、温度下降后在略低于盐酸溶液恒沸点时发生冷凝相变而引起的。%Reasons for a cracking accident of hydrochloric acid storage tank caused by vacuum in hydrochloric acid desorption process were analyzed. Pressure changes inside dilute hydrochloric acid storage tank were indirectly analyzed according to DCS historical graph record of the pressure type level meter for the hydrochloric acid storage tank, and the negative pressure formation process was also discussed. The results showed that the formation of large negative pressure in desorption col- umn was caused by phase transition of condensation occurred whlie the temperature of system was a little less than the constant boiling point of hydrochloric acid solution, which was caused by emer- gency shutdown of system and temperature falling.

  20. Growth and membrane fluidity of food-borne pathogen Listeria monocytogenes in the presence of weak acid preservatives and hydrochloric acid

    Directory of Open Access Journals (Sweden)

    Ioannis eDiakogiannis

    2013-06-01

    Full Text Available This study addresses a major issue in microbial food safety, the elucidation of correlations between acid stress and changes in membrane fluidity of the pathogen Listeria monocytogenes. In order to assess the possible role that membrane fluidity changes play in L. monocytogenes tolerance to antimicrobial acids (acetic, lactic, hydrochloric acid at low pH or benzoic acid at neutral pH, the growth of the bacterium and the gel-to-liquid crystalline transition temperature point (Tm of cellular lipids of each adapted culture was measured and compared with unexposed cells. The Tm of extracted lipids was measured by Differential Scanning Calorimetry (DSC. A trend of increasing Tm values but not of equal extent was observed upon acid tolerance for all samples and this increase is not directly proportional to each acid antibacterial action. The smallest increase in Tm value was observed in the presence of lactic acid, which presented the highest antibacterial action. In the presence of acids with high antibacterial action such as acetic, hydrochloric acid or low antibacterial action such as benzoic acid, increased Tm values were measured. The Tm changes of lipids were also correlated with our previous data about fatty acid changes to acid adaptation. The results imply that the fatty acid changes are not the sole adaptation mechanism for decreased membrane fluidity (increased Tm. Therefore, this study indicates the importance of conducting an in-depth structural study on how acids commonly used in food systems affect the composition of individual cellular membrane lipid molecules.

  1. Corrosion inhibition of C38 steel in 1 M hydrochloric acid medium by alkaloids extract from Oxandra asbeckii plant

    Energy Technology Data Exchange (ETDEWEB)

    Lebrini, M. [Laboratoire Materiaux et Molecules en Milieu Amazonien, CNRS 8172-UMR ECOFOG, Campus Trou Biran, Cayenne 97337, French Guiana (France); Robert, F.; Lecante, A. [Laboratoire Materiaux et Molecules en Milieu Amazonien, UAG-UMR ECOFOG, Campus Trou Biran, Cayenne 97337, French Guiana (France); Roos, C., E-mail: christophe.roos@guyane.univ-ag.f [Laboratoire Materiaux et Molecules en Milieu Amazonien, UAG-UMR ECOFOG, Campus Trou Biran, Cayenne 97337, French Guiana (France)

    2011-02-15

    Research highlights: The inhibition effect of alkaloid extract of Oxandra asbeckii plant on the corrosion of C38 steel in 1 M hydrochloric acid solution has been investigated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). Oxandra asbeckii extract examined acted as an efficient corrosion inhibitor in 1 M HCl. Polarization studies showed that Oxandra asbeckii extract was a mixed-type inhibitor and its inhibition efficiency increased with the inhibitor concentration. - Abstract: The inhibition effect of alkaloids extract from Oxandra asbeckii plant (OAPE) on the corrosion of C38 steel in 1 M hydrochloric acid solution has been investigated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The corrosion inhibition efficiency increases on increasing plant extracts concentration. Cathodic and anodic polarization curves show that OAPE is a mixed-type inhibitor. The effect of temperature on the corrosion behavior of C38 steel in 1 M HCl with and without addition of plant extract was studied in the temperature range 25-55 {sup o}C. The thermodynamic functions of dissolution and adsorption processes were calculated from experimental polarization data and the interpretation of the results are given. The adsorption of this plant extract on the C38 steel surface obeys the Langmuir adsorption isotherm. Surface analysis (Raman) was also carried out to establish the corrosion inhibitive property of this plant extract in HCl solution.

  2. Hydrochloric acid alters the effect of L-glutamic acid on cell viability in human neuroblastoma cell cultures.

    Science.gov (United States)

    Croce, Nicoletta; Bernardini, Sergio; Di Cecca, Stefano; Caltagirone, Carlo; Angelucci, Francesco

    2013-07-15

    l-Glutamic acid (l-glutamate) is used to induce excitotoxicity and test neuroprotective compounds in cell cultures. However, because l-glutamate powder is nearly insoluble in water, many manufacturers recommend reconstituting l-glutamate in hydrochloric acid (HCl) prior to successive dilutions. Nevertheless, HCl, even at low concentrations, may alter the pH of the cell culture medium and interfere with cell activity. Thus, the aim of this study was to evaluate whether the reconstitution of l-glutamate powder in HCl alters its capacity to induce neurotoxicity in different human neuroblastoma cell lines. SH-SY5Y, IMR-32 and SK-N-BE(2) cells were exposed to various concentrations of l-glutamate, which was either reconstituted in HCl (1M) or post re-equilibrated to the pH of the culture medium (7.5). After 24 and 48h of incubation, changes in the cell viability of treated versus untreated cells were evaluated. The effect of an identical amount of HCl present in the l-glutamate dilutions on neuroblastoma cell survival was also investigated. Our data showed that the neurotoxicity of glutamate reconstituted in HCl was comparable to that of HCl alone. Moreover, the pH variations induced by glutamate or HCl in the culture medium were similar. When the pH of the glutamate stock solution was re-equilibrated, l-glutamate induced variation in cell viability to a lower extent and after a longer incubation time. This study demonstrated that HCl used to reconstitute l-glutamate powder might alter the effect of glutamate itself in neuroblastoma cell cultures. Thus, this information might be useful to scientists who use l-glutamate to induce excitotoxicity or to test neuroprotective agents.

  3. Selective liquid-liquid extraction of antimony(III from hydrochloric acid media by N-n-octylaniline in xylene

    Directory of Open Access Journals (Sweden)

    M. A. ANUSE

    2004-04-01

    Full Text Available N-n-Octylaniline in xylene was used for the extraction separation of antimony(III from hydrochloric acid media. Antimony(III was extracted quantitatively with 10 mL 4 % N-n-octylaniline in xylene. It was stripped from the organic phase with 0.5 M ammonia and estimated photometrically by the iodide method. The effect of metal ion, acid, reagent concentration and various foreign ions was investigated. The method affords binary and ternary separation of antimony(III from tellurium(IV, selenium(IV, lead(II, bismuth(III, tin(IV, germanium(IV, copper(II, gold(III, iron(III and zinc(II. The method is applicable for the analysis of synthetic mixtures, alloys and semiconductor thin films. It is fast, accurate and precise.

  4. A Study of N,N-Diethylammonium O,O′-Di(p-methoxyphenyldithiophosphate as New Corrosion Inhibitor for Carbon Steel in Hydrochloric Acid Solution

    Directory of Open Access Journals (Sweden)

    Chuan Lai

    2016-01-01

    Full Text Available N,N-Diethylammonium O,O′-di(p-methoxyphenyldithiophosphate (EAPP as a new corrosion inhibitor was synthesized in the present work. The corrosion inhibition of EAPP in hydrochloric acid for carbon steel was evaluated by potentiodynamic polarization measurements, electrochemical impedance spectroscopy, weight loss measurements, and scanning electron microscopy. The results indicate that the EAPP is mixed type inhibitor, and the adsorption of EAPP on carbon steel surface obeys Langmuir isotherm. In addition, the inhibition efficiency increases with increasing the concentration of inhibitor and decreases with increasing the hydrochloric acid concentration, temperature, and storage time.

  5. Hydrodechlorination of Silicon Tetrachloride to Trichlorosilane Over Ordered Mesoporous Carbon Catalysts: Effect of Pretreatment of Oxygen and Hydrochloric Acid.

    Science.gov (United States)

    Kwak, Do-Hwan; Akhtar, M Shaheer; Kim, Ji Man; Yang, O Bong

    2016-02-01

    This paper reports on the catalytic reaction for the conversion of silicon tetrachloride (STC) to trichlorosilane (TCS) over pretreated ordered mesoporous carbon (OMC) catalysts by oxygen (denoted as OMC-O2) and hydrochloric acid (denoted as OMC-HCl) at 300 degrees C under N2 atmosphere. The OMC-O2 shows significantly improved the surface area (1341.2 m2/g) and pore volume (1.65 cm3/g), which results in the highest conversion rate of 7.3% as compared to bare OMC (4.3%) and OMC-HCI (5.7%). It is found that the conversion rate of STC to TCS is proportional to the number of Si-O bond over OMC catalysts, which suggests that Si-O-C bond formation is crucial to the reaction as active sites. The O2 pretreatment seems to promote the generation of oxygenated species for the formation of Si-O-C.

  6. Electrochemical study on inhibitory effect of Aspirin on mild steel in 1 M hydrochloric acid

    Directory of Open Access Journals (Sweden)

    B.M. Prasanna

    2017-02-01

    Full Text Available Aspirin was investigated as a good corrosion inhibitor for mild steel in 1 M hydrochloric acid at a temperature region from 303 to 333 K. The computed inhibition efficiency increases by increasing the inhibitor concentration and decreases by increasing the temperature. The investigation was done by weight loss, electrochemical measurements such as Tafel polarization and electrochemical impedance spectroscopy. Inhibition effect is attributed to the adsorption of inhibitor on the surface of the mild steel. The Tafel method reveals that the Aspirin acts as a mixed type inhibitor. Activation parameters suggest that the adsorption process is exothermic in nature. SEM photographs of mild steel in the absence and presence of inhibitor visualize the adsorption layer on the surface of the mild steel.

  7. Growth and membrane fluidity of food-borne pathogen Listeria monocytogenes in the presence of weak acid preservatives and hydrochloric acid.

    Science.gov (United States)

    Diakogiannis, Ioannis; Berberi, Anita; Siapi, Eleni; Arkoudi-Vafea, Angeliki; Giannopoulou, Lydia; Mastronicolis, Sofia K

    2013-01-01

    This study addresses a major issue in microbial food safety, the elucidation of correlations between acid stress and changes in membrane fluidity of the pathogen Listeria monocytogenes. In order to assess the possible role that membrane fluidity changes play in L. monocytogenes tolerance to antimicrobial acids (acetic, lactic, hydrochloric acid at low pH or benzoic acid at neutral pH), the growth of the bacterium and the gel-to-liquid crystalline transition temperature point (T m) of cellular lipids of each adapted culture was measured and compared with unexposed cells. The T m of extracted lipids was measured by differential scanning calorimetry. A trend of increasing T m values but not of equal extent was observed upon acid tolerance for all samples and this increase is not directly proportional to each acid antibacterial action. The smallest increase in T m value was observed in the presence of lactic acid, which presented the highest antibacterial action. In the presence of acids with high antibacterial action such as acetic, hydrochloric acid or low antibacterial action such as benzoic acid, increased T m values were measured. The T m changes of lipids were also correlated with our previous data about fatty acid changes to acid adaptation. The results imply that the fatty acid changes are not the sole adaptation mechanism for decreased membrane fluidity (increased T m). Therefore, this study indicates the importance of conducting an in-depth structural study on how acids commonly used in food systems affect the composition of individual cellular membrane lipid molecules.

  8. [Butanol extraction combined with dilute hydrochloric acid dissolution-atomic fluorescence spectrometric method for indirect determination of molybdenum in Chinese herbal medicine].

    Science.gov (United States)

    Lu, Jian-Ping; Geng, Guo-Xing; Tang, Yan-Kui; Lu, Zhi-Yong

    2012-12-01

    A method for indirectly determining the molybdenum in Chinese herbal medicine by butanol extraction and dilute hydrochloric acid dissolution was established for atomic fluorescence spectrometry. The molybdoarsenate heteropoly acid, formed in the presence of As(V) and ammonium molybdate in 0.3 mol x L(-1) sulphuric acid medium, was separated and enriched in the organic solvent, then the evaporation of organic reagent was implemented and the left residue was dissolved in dilute hydrochloric acid in which the arsenic content was determined on behalf of molybdenum. In the optimum experimental conditions, molybdenum content in 0-15 microg x L(-1) range depicts a good linear relationship, the detection limit and relative standard deviation of 0.44 microg x L(-1) and 1.1% were obtained, respectively. Spiked Chinese herbal medicine samples were determined with the proposed method, and recoveries of 95.6%-101.3% were achieved.

  9. A New Solid Sorbent System for Rapid Monitoring of Dehydrogenated Nicotine by Using Furfural-hydrochloric Acid

    Institute of Scientific and Technical Information of China (English)

    B. AMBADE; E. K. JANGHEL; M. K. RAI; G. L. MUNDHARA

    2006-01-01

    A new solid sorbent system is developed for the monitoring of dehydrogenated nicotine in the environment. The reagent system for the indicator tube consists of furfural-hydrochloric acid and phosphoric acid impregnated over a cellulose fibre (cotton) and a humectant calcium chloride. The reagent system has also been used for the preparation of reagent paper. After exposing the indicator tubes and test paper to dehydrogenated nicotine, for a constant time, the red-violet colour developed could be compared with those obtained from standards. Alternatively the coloured compound was extracted in water and the absorbance measured at 540 nm. The lower limit of detection is 0.03 μg/m3 of nicotine for the reagent papers and indicator tubes. The lower limit of determination by spectrophotometric procedure is 0.001 μg/m3 of air.The preparation of indicator tubes, test papers and their applications for the detection and determination of nicotine in environmental tobacco smoke (ETS), mainstream smoke (MS), side stream smoke (SS) and biological samples is described in this paper.

  10. The influence of long term use of inhibitors in hydrochloric acid pickling baths on hydrogen induced stress corrosion cracking

    Energy Technology Data Exchange (ETDEWEB)

    Feser, R.; Friedrich, A.; Scheide, F. [Fachhochschule Suedwestfalen, University of Applied Science, Frauenstuhlweg 31, D-58644 Iserlohn (Germany)

    2002-09-01

    The influence of commercially available inhibitors on the absorption of hydrogen by steel (St 52, StE 460, StE 690, 42CrMo4) in 15% hydrochloric acid was studied. The pickling bath aged continuously due to the chemical reaction with oxidized steel sheets. The H{sup +}- and inhibitor concentration decreased with time. The influence of this ageing process on hydrogen-induced stress corrosion cracking was tested by in-situ tensile tests in the bath solution. With increasing ageing of the bath, the reduction in fracture area was reduced and approached the values measured for non-inhibited acid baths. Furthermore hydrogen permeation was investigated. Permeation current densities rose with increasing ageing of the pickling solution. (Abstract Copyright[2002], Wiley Periodicals, Inc.) [German] Der Einfluss von kommerziell erhaeltlichen Inhibitoren auf die Wasserstoffabsorption von Stahl (St 52, StE 460, StE 690, 42CrMo4) wurde in Salzsaeure untersucht. Die Beizbaeder wurden kontinuierlich durch die chemische Reaktion mit oxidierten Stahlblechen gealtert. Die H{sup +}- und Inhibitorkonzentration nahm mit der Zeit ab. Der Einfluss dieses Alterungsprozesses auf die wasserstoffinduzierte Spannungsrisskorrosion wurde durch in-situ Zugversuche mit Badloesung untersucht. Mit zunehmender Alterung des Bades nahm die Brucheinschnuerung ab und erreichte Werte wie sie auch in der nicht inhibierten Saeure erreicht werden. Weiterhin wurde die Wasserstoff-Permeation untersucht. Die Permeationsstromdichte steigt mit zunehmender Alterung der Beizloesung. (Abstract Copyright[2002], Wiley Periodicals, Inc.)

  11. Interaction between amylose and 1-butanol during 1-butanol-hydrochloric acid hydrolysis of normal rice starch.

    Science.gov (United States)

    Hu, Xiuting; Wei, Benxi; Zhang, Bao; Li, Hongyan; Xu, Xueming; Jin, Zhengyu; Tian, Yaoqi

    2013-10-01

    The aim of this study was to examine the interaction between amylose and 1-butanol during the 1-butanol-hydrochloric acid (1-butanol-HCl) hydrolysis of normal rice starch. The interaction model between amylose and 1-butanol was proposed using gas chromatography-mass spectrometry (GC-MS), (13)C cross polarization and magic angle spinning NMR analysis ((13)C CP/MAS NMR), differential scanning calorimetry (DSC), and thermalgravimetric analysis (TGA). GC-MS data showed that another form of 1-butanol existed in 1-butanol-HCl-hydrolyzed normal rice starch, except in the form of free molecules absorbed on the starch granules. The signal of 1-butanol-HCl-hydrolyzed starch at 100.1 ppm appeared in the (13)C CP/MAS NMR spectrum, indicating that the amylose-1-butanol complex was formed. DSC and TGA data also demonstrated the formation of the complex, which significantly affected the thermal properties of normal rice starch. These findings revealed that less dextrin with low molecular weight formed might be attributed to resistance of this complex to acid during 1-butanol-HCl hydrolysis.

  12. Preliminary study on concrete corrosion of hydrochloric acid%盐酸对混凝土的腐蚀研究

    Institute of Scientific and Technical Information of China (English)

    焦瑞敏

    2011-01-01

    In this paper,ordinary Portland cement concrete and modified concrete were corroded by hydrochloric acid which pH=1.After 60 days of corrosion,the cube compressive strength of every sample is reduced in different degree,from which we can know that amount of fly ash and fume can increase the resistance ability to acid corrosion to some degree but the styrene-butadiene latices reduced this ability of concrete.%对普通硅酸盐水泥混凝土以及改性混凝土进行pH=1的盐酸腐蚀,在腐蚀60d后,各种混凝土的立方体抗压强度均有不同程度的降低。适量的粉煤灰和硅灰可以一定程度地提高混凝土的抗酸性腐蚀性能,而丁苯胶乳的加入却会降低混凝土的这种抗酸性腐蚀性能。

  13. Preparation of Butyl Chloride from Butanol and Hydrochloric Acid Using Ionic Liquids as Catalyst%离子液体催化丁醇与盐酸反应制备丁基氯

    Institute of Scientific and Technical Information of China (English)

    孙爱军; 聂毅; 李春喜; 王子镐

    2008-01-01

    The catalytic performance of some quaternary ammonium salts for the liquid phase reaction of butanol and hydrochloric acid at different conditions was studied experimentally and compared with the traditional catalyst (ZnC12). The organic ammonium catalysts investigated include ionic liquids N-butyl-N-methyl imidazolium fluobo-rate ([BMIM][BF4]) and N-butyl-N-methylimidazolium chloride ([BMIM]Cl) as well as hydrochloric salts of N-methylimidazol ([HMIM]Cl), pyridine ([Hpy]Cl) and triethylamine ([HEt3N]Cl). It is shown that the intrinsic catalytic performance of all organic ammonium salts except [Het3N]Cl is slightly superior to ZnCl2, while the se-lectivity of butyl chloride is nearly at the same level around 96%. The conversion of butanol increases slightly with temperature and the catalyst amount added while the variation of selectivity is not obvious. Based on the recycle experiments, the ionic liquids as catalyst for the reaction of butanol and hydrochloric acid can be used more than 5 times, which suggests great potential of using ionic liquids as novel catalyst for such reactions.

  14. Electrochemical and quantum chemical studies of new thiadiazole derivatives adsorption on mild steel in normal hydrochloric acid medium

    Energy Technology Data Exchange (ETDEWEB)

    Lebrini, M. [Laboratoire de Cristallochimie et Physicochimie du Solide, CNRS UMR 8012, ENSCL, B.P. 108, F-59652 Villeneuve d' Ascq Cedex (France); Lagrenee, M. [Laboratoire de Cristallochimie et Physicochimie du Solide, CNRS UMR 8012, ENSCL, B.P. 108, F-59652 Villeneuve d' Ascq Cedex (France); Vezin, H. [Laboratoire de Chimie Organique et Macromoleculaire, CNRS UMR 8009, USTL Bat C3, F-59655 Villeneuve d' Ascq Cedex (France); Gengembre, L. [Laboratoire de Catalyse Heterogene et Homogene, CNRS UMR 8010, Bat C3, USTL, F-59655 Villeneuve d' Ascq Cedex (France); Bentiss, F. [Laboratoire de Cristallochimie et Physicochimie du Solide, CNRS UMR 8012, ENSCL, B.P. 108, F-59652 Villeneuve d' Ascq Cedex (France)]. E-mail: f.bentiss@pop.ensc-lille.fr

    2005-02-01

    In this work, a new class of thiadiazole derivatives, namely 3,5-bis(2-thienyl)-1,3,4-thiadiazole (2-TTH) and 3,5-bis(3-thienyl)-1,3,4-thiadiazole (3-TTH), have been studied as possible corrosion inhibitors for mild steel in molar hydrochloric acid (1 M HCl). Weight loss measurements, polarisation curves and AC impedance methods have been used. These studies have shown that the thiadiazole derivatives were very good inhibitors for mild steel in 1 M HCl. Comparison of results showed that 3-TTH was the best inhibitor. The potential of zero charge (PZC) of mild steel was studied by AC impedance method, and the mechanism of adsorption has been predicted. X-ray photoelectron spectroscopy surface analysis with thiadiazole derivatives shows that it chemisorbed at the mild steel/HCl interface. The adsorption of these inhibitors followed Langmuir's adsorption isotherm. The electronic properties of 2-TTH and 3-TTH, obtained using the AM1 semi-empirical quantum chemical approach, were correlated with their experimental efficiencies using the linear resistance model (LR). These inhibitors are considered as non-cytotoxic substances.

  15. Enhanced corrosion resistance of mild steel in hydrochloric acid solution by new thiadiazole derivatives: Electrochemical, theoretical and XPS studies

    Energy Technology Data Exchange (ETDEWEB)

    Bentiss, Fouad; Lebrini, Mounim; Lagrenee, Michel [Laboratoire de Cristallochimie et Physicochimie du Solide, CNRS UMR 8012, ENSCL, BP. 108, F-59652 Villeneuve d' Ascq Cedex (France); Herve, Vezin [Laboratoire de Chimie Organique et Macromoleculaire, CNRS UMR 8009, USTL Bat C3, F-59655 Villeneuve d' Ascq Cedex (France)

    2004-07-01

    In this work, a new class of thiadiazole derivatives, namely 3,5-bis(2-thienyl)-1,3,4-thiadiazole (2-TTH) and 3,5-bis(3-thienyl)-1,3,4-thiadiazole (3-TTH), have been studied as possible corrosion inhibitors for mild steel in molar hydrochloric acid (1M HCl). Polarisation curves and AC impedance methods have been used. These studies have shown that the thiadiazole derivatives were very good inhibitors for mild steel in 1M HCl. Comparison of results showed that 3-TTH was the best inhibitor. The potential of zero charge (PZC) of mild steel was studied by ac impedance method, and the mechanism of adsorption has been predicted. X-ray photoelectron spectroscopy surface analysis with thiadiazole derivatives shows that it chemisorbed at the mild steel/HCl interface. The adsorption of these inhibitors followed Langmuir's adsorption isotherm. The electronic properties of 2-TTH and 3-TTH, obtained using the AM1 semi-empirical quantum chemical approach, were correlated with their experimental efficiencies using the linear resistance model (LR). (authors)

  16. Inhibition of Aluminium Corrosion in Hydrochloric Acid Using Nizoral and the Effect of Iodide Ion Addition

    Directory of Open Access Journals (Sweden)

    I. B. Obot

    2010-01-01

    Full Text Available The effect of nizoral (NZR on the corrosion inhibition of aluminium alloy AA 1060 in 2 M HCl solution was investigated using the mylius thermometric technique. Results of the study revealed that nizoral acts as corrosion inhibitor for aluminium in the acidic medium. In general, at constant acid concentration, the inhibition efficiency increases with increase in the inhibitor concentration. The addition of KI to the inhibitor enhanced the inhibition efficiency to a considerable extent. The adsorption of nizoral onto the aluminium surface was found to obey the Fruendlich adsorption isotherm. The value of the free energy for the adsorption process shows that the process is spontaneous.

  17. N-methyl-2-(2-nitrobenzylidene) hydrazine carbothioamide-A new corrosion inhibitor for mild steel in 1 mol·L-1 hydrochloric acid

    Institute of Scientific and Technical Information of China (English)

    K Krishnaveni; K Sampath; J Ravichandran; C Jayabalakrishnan

    2015-01-01

    The corrosion inhibition of mild steel in 1 mol·L−1 hydrochloric acid by N-methyl-2-(2-nitrobenzylidene) hydrazine carbothioamide (MNBHC) was studied using weight loss and electrochemical studies. Results obtained indicate that the inhibitor is effective in hydrochloric acid medium and the efficiency decreases with increase in temperature. Added halide additives improve the efficiency of the inhibitor. The AC impedance studies reveal that the process of inhibition is through charge transfer. Polarization studies indicate the mixed nature of the in-hibitor. From the thermodynamic, spectral and surface analyses the nature of adsorption has been found out. The adsorption of the inhibitor on mild steel follows the Langmuir isotherm.

  18. Effect of ethylenediamine tetraacetic acid disodium on the corrosion of cold rolled steel in the presence of benzotriazole in hydrochloric acid

    Energy Technology Data Exchange (ETDEWEB)

    Qu, Qing [Department of Chemistry, Yunnan University, Kunming 650091 (China)]. E-mail: quqing58@yahoo.com.cn; Jiang, Shuan [Department of Chemistry, Yunnan University, Kunming 650091 (China); Bai, Wei [Department of Chemistry, Yunnan Nationalities University, Kunming 650092 (China); Li, Lei [Laboratory for Conservation and Utilization of Bio-Resources, Yunnan University, Kunming 650091 (China)

    2007-08-01

    The inhibition behavior of cold rolled steel in 0.1 M hydrochloric acid (HCl) by ethylenediamine tetraacetic acid disodium (EDTA) in the absence and presence of benzotriazole (BTA) was investigated with Tafel polarization curve and electrochemical impedance spectroscopy (EIS). The polarization curve results show that the single EDTA acts as an anodic type inhibitor while the combination of EDTA and BTA acts as mixed type inhibitor and mainly inhibits anodic reaction. All impedance spectra in EIS tests exhibit one capacitive loop which indicates that the corrosion reaction is controlled by charge transfer process. Inhibition efficiencies obtained from Tafel polarization, charge transfer resistance (R {sub t}) are consistent. The corrosion of cold rolled steel in 0.1 M HCl is obviously reduced by EDTA in combination with lower concentrations of BTA. Fourier transform infrared spectroscopy (FTIR) and atomic force microscopy (AFM) were used to characterize the corrosion surface of cold rolled steel. Probable mechanisms are present to explain the experimental results.

  19. Effect of triamcinolone acetonide ammonia bromine joint hydrochloric acid on patients with secretory otitis media and on body's inflammatory factor and cellular immunologic parameters

    Institute of Scientific and Technical Information of China (English)

    Quan-Fu Hu; Shao-Ji Ouyang; Rong-Wei Yao; Xue-Jiang Xu; Jin-Hua He; Li-Li Zhang

    2016-01-01

    Objective:To explore the clinical effect of triamcinolone acetonide ammonia bromine joint hydrochloric acid on patients with secretory otitis media and the influences on the body's inflammatory factors and cellular immunologic parameters.Methods:A total of 40 cases of single ear secretory otitis media patients of the same period in our hospital were randomly selected as experimental group, using triamcinolone acetonide ammonia bromine joint hydrochloric acid treatment; And 40 cases of single ear secretory otitis media patients of the same period were randomly selected as control group, using dexamethasone treatment. To observe the clinical efficacy of two groups of patients and detect the inflammatory factors and cellular immune index level of the two groups of patients before and after treatment.Results:The total effective rate(90%) of treatment group is significantly higher than that (80%) of control group (P0.05). After treatment, the serum and ear effusion inflammatory cytokines levels of the two groups were significantly lower than that before treatment (P0.05); The CD4+/CD8+ levels of experimental group were significantly higher than the control group (P0.05). Conclusions: The triamcinolone acetonide ammonia bromine joint hydrochloric acid treatment is more conducive to improve the immune function of the secretory otitis media patients and treatment effect, which has important clinical significance on the treatment of secretory otitis media patients.

  20. Kinetic study of the prehydrolysis of bagasse pith with hydrochloric acid in an agitated system

    Energy Technology Data Exchange (ETDEWEB)

    Villan Guerra, J.; Iglesias, R.G.; Lopez Planes, R.

    1981-01-01

    The hydrolysis of bagasse pith at 90-100 degrees with 0.25 N HCl gave sugar in 22% yield after 120 min. With 0.5 N HCl, the yield was 28% after 240 min. The specific constants of pentosan decomposition and of sugar formation were calculated, and the kinetic parameters (frequency factor, activation energy, and order of acid concentration) were determined. The pentosan decomposition constants were higher and the activation energies lower than literature values for hydrolysis with H/sub 2/SO/sub 4/.

  1. 硫铁矿烧渣双酸酸解工艺研究%Study on decomposition process of pyrite cinder with hydrochloric acid and sulfuric acid

    Institute of Scientific and Technical Information of China (English)

    左大学; 王仁宗

    2012-01-01

    The decomposition process of pyrite cinder with hydrochloric acid and sulfuric acid , and its influence factors are studied. Through orthogonal test, the optimum process conditions are confirmed including: the consumption factor of hydrochloric acid with w(HC1) of 37% is 0.12; the consumption factor of sulfuric acid with w(H2SO4) of 65%-70% is 0.95, the reaction temperature is of 125 ℃, the reaction time is of 4h. The decomposition rate of pyrite cinder can reach to above 95%, and the product ferric sulfate solution can be used to produce polymeric ferric sulfate and iron oxide pigments.%研究了硫铁矿烧渣双酸酸解工艺及影响酸解的因素。通过正交实验,找到最适宜的工艺条件:w(HCl)37%,盐酸用量系数为0.12,硫酸用量系数为0.95,硫酸W(H2SO4)为65%~70%,反应温度为125℃,反应时间为4h,酸解率可达95%以上,制得的硫酸铁盐溶液可用作生产聚合硫酸铁及氧化铁系颜料的原料。

  2. Seed Extract of Psidium guajava as Ecofriendly Corrosion Inhibitor for Carbon Steel in Hydrochloric Acid Medium

    Institute of Scientific and Technical Information of China (English)

    K.P.Vinod Kumar; M. Sankara Narayana Pillai; G. Rexin Thusnavis

    2011-01-01

    The anticorrosion characteristics of the seeds of Psidium guajava (P. Guajava) fruits on carbon steel in acid medium were examined with weight loss data and subsequently thermodynamic factors such as heat of adsorption of the inhibitor on the metal surface (Q), change in entropy (△S), change in free energy of the reaction (△G), corrosion rate (CR) and energy of activation for corrosion reaction of carbon steel (E) were also evaluated. Adsorption isotherm was plotted to study the adsorption of the inhibitor on the metal surface with increasing concentration of the inhibitor. The functional groups responsible for inhibition were investigated using Fourier transform infrared (FT-IR) spectra. Electrochemical parameters were evaluated through the potentiodynamic Tafel polarization and impedance spectral studies. Scanning electron microscopy (SEM) micrographs were recorded to investigate the change in surface morphology. The complete study reveals the efficiency of seed extract of P. Guajava as a safe, ecofriendly and alternate corrosion inhibitor for carbon steel in acid medium.

  3. Punica granatum leave extract as green corrosion inhibitor for mild steel in Hydrochloric acid

    Directory of Open Access Journals (Sweden)

    Abboud Y.

    2013-09-01

    Full Text Available Leave of Punica granatum extract (LPGE as green inhibitor for the corrosion of mild steel in 1M HCl solution was studied using weight-loss and potentiodynamic polarization measurements. The results obtained revealed that LPGE has fairly good inhibiting properties for mild steel corrosion in 1M HCl solution, with efficiency of around 94 % at a concentration of 1 g/l. The inhibition was of a mixed anodic–cathodic nature. The film which is formed over the metal surface was analysed by FT-IR spectroscopy. Further examination using X-ray diffraction confirms the role of LPGE as an effective corrosion inhibitor for mild steel in acid media.

  4. Thallium extraction from hydrochloric acid media into a deep eutectic solvent using bis(2-ethylhexyl) phosphate

    Science.gov (United States)

    Tran, Kate; Volia, Merinda; Tereshatov, Evgeny; Folden, Charles, III

    2016-09-01

    The chemical properties of superheavy elements are relatively unknown due to their short half-lives and difficulty of production. In preparation for a future experiment to study the chemical properties of element 113, separation techniques have been used to study the behavior of its homologs, In and Tl. Previous work studied the liquid-liquid extraction of radioactive 201Tl (t1 / 2 = 3 . 04 d) from various concentrations of HCl into a mixture of menthol and lauric acid that formed a so-called deep eutectic solvent (DES). This work focuses on the effects of adding an extraction agent, bis(2-ethylhexyl) phosphate (HDEHP), to the DES on the efficiency of thallium extraction. The extraction of Tl(I) was generally poor, both with and without HDEHP added. In contrast, 111In (t1 / 2 = 2 . 80 d) showed significant extraction using HDEHP added to the same DES. This difference in behavior could potentially be exploited in a future experiment on the chemistry of element 113. National Science Foundation.

  5. Formation of Hydrogen-Ion in Isomolar Solution of Hydrochloric and Hydrobromic Acids and Their Salts

    Directory of Open Access Journals (Sweden)

    M.A. Kovaleva

    2016-09-01

    Full Text Available Despite the presence of a large amount of factual material on thermodynamic parameters of complexation of agents in different solvents, including mixed ones, obtained knowledge is specific in nature. In order to identify more general patterns, studies are relevant that would allow to interpret the obtained data taking into account the interaction between chemical forms in solutions. This paper presents a general approach to studying weak ionic interactions in solutions that allows to simultaneously determine the constants of these interactions and the parameters characterizing the influence of changes in the ionic environment on these constants by the example of chlorides and bromides of alkali metals. The obtained constants for hydrosulfate-ion formation and the imperfection parameters can be a reference material for more accurate calculation of the concentration of hydrogen ions in sulfuric acid solutions. The developed approach and patterns identified in the work can be used to study the balanced states for formation of low and medium stable complexes.

  6. Effect of commercial fluoride dentifrices against hydrochloric acid in an erosion-abrasion model.

    Science.gov (United States)

    Passos, Vanara Florêncio; de Vasconcellos, Andréa Araújo; Pequeno, José Heriberto Pinheiro; Rodrigues, Lidiany Karla Azevedo; Santiago, Sérgio Lima

    2015-01-01

    This study assessed the effect of three commercial dentifrices with different fluoride-containing compounds in controlling the progression of dentin loss using an in vitro erosion-abrasion model. Dentin specimens were randomized into four groups (n = 10): control (no F), Elmex (1,400 ppm AmF), Meridol (1,400 ppm AmF/SnF2), and Crest Pro-Health (1,100 ppm SnF2). The dentin specimens were submitted to cycles of demineralization (HCl 0.01 M for 60 s), remineralization (artificial saliva for 60 min), and immersion in 1:3 w/w of dentifrice/artificial saliva, followed by toothbrushing (150 brushing strokes). The cycle was repeated three times daily for 5 days. Surface loss was quantified by stylus profilometry. Data were submitted to one-way ANOVA and Tukey's tests (p fluoride can strengthen dental tissue against erosive acid damage. However, the beneficial effect of different fluorides present in commercial dentifrices is questionable. Thus, a determination of an effective fluoride dentifrice may be beneficial in the reduction of the erosive process in patients with gastric disorders.

  7. 萃取净化盐酸法制备磷酸工艺研究%Study of Preparation Phosphoric Acid Process by Extraction and Purification of Hydrochloric Acid Process

    Institute of Scientific and Technical Information of China (English)

    杨站平; 闫小玲; 张树帜; 王长锐

    2014-01-01

    Based on preparation crude phosphoric acid by acid hydrolysis of ground phosphate rocks with hydrochloric acid , using process of combination of tributyl phosphate and kerosene mixed solvent extraction with chemical precipitation process to carry out purification treatment for crude phosphoric acid , after refine , concentration , removal of impurities and decolorization , food grade phosphoric product is obtained . Research results show that mass fraction of prepared product phosphoric acid is 85.2%, all indicators achieved not only meet standard requirements of industrial grade phosphoric acid , but also reach qualifications of food grade phosphoric acid .%以盐酸酸解磷矿粉制得粗磷酸为基础,采用磷酸三丁酯和煤油混合溶剂萃取与化学沉淀法相结合的工艺对粗磷酸进行净化处理,通过精制、浓缩、除杂、脱色后可制得食品级磷酸产品。研究结果表明:试验制得的产品磷酸质量分数为85.2%,各项指标不仅达到了工业级磷酸标准要求,而且达到了食品级磷酸标准要求。

  8. 盐酸浸出赤泥回收铝的研究%Study on Aluminum Recovery from Red Mud with Hydrochloric Acid

    Institute of Scientific and Technical Information of China (English)

    王克勤; 王皓; 李生虎

    2012-01-01

    The hydrochloric acid leaching process of aluminum from Bayer red mud was studied. The effects of temperature, time, ratio of liquid to solid (L/S) and concentration of hydrochloric acid on aluminum leaching rate were investigated. The industrial experiment of aluminum recovery from red mud was conducted. The results show that factors affecting the rate of aluminum extraction in sequence are temperature, L/S, hydrochloric acid concentration and leaching time. The leaching rate and recovery rate of aluminum from red mud is 88. 13% and 80. 26% respectively after two-step leached at 80℃, evaporation, de-titanium, de-calcium, neutralization and dissolving with sodium hydroxide solution.%研究了盐酸浸出拜耳法赤泥中铝的过程.考察浸出温度、浸出时间、液固比和酸度对铝浸出率的影响,并进行了赤泥回收铝的工业化试验.结果表明,影响铝浸出率的主次因素依次是浸出温度、液固比、盐酸浓度和浸出时间.赤泥在80℃下进行两段浸出,再经蒸发、除钛、除钙、中和及氢氧化钠溶液溶出,铝浸出率为88.13%,回收率为80.26%.

  9. Cell cycle profiling by image and flow cytometry: The optimised protocol for the detection of replicational activity using 5-Bromo-2′-deoxyuridine, low concentration of hydrochloric acid and exonuclease III

    Science.gov (United States)

    Konečný, Petr; Frydrych, Ivo; Koberna, Karel

    2017-01-01

    The approach for the detection of replicational activity in cells using 5-bromo-2′-deoxyuridine, a low concentration of hydrochloric acid and exonuclease III is presented in the study. The described method was optimised with the aim to provide a fast and robust tool for the detection of DNA synthesis with minimal impact on the cellular structures using image and flow cytometry. The approach is based on the introduction of breaks into the DNA by the low concentration of hydrochloric acid followed by the subsequent enzymatic extension of these breaks using exonuclease III. Our data showed that the method has only a minimal effect on the tested protein localisations and is applicable both for formaldehyde- and ethanol-fixed cells. The approach partially also preserves the fluorescence of the fluorescent proteins in the HeLa cells expressing Fluorescent Ubiquitin Cell Cycle Indicator. In the case of the short labelling pulses that disabled the use of 5-ethynyl-2′-deoxyuridine because of the low specific signal, the described method provided a bright signal enabling reliable recognition of replicating cells. The optimized protocol was also successfully tested for the detection of trifluridine, the nucleoside used as an antiviral drug and in combination with tipiracil also for the treatment of some types of cancer. PMID:28426799

  10. Cell cycle profiling by image and flow cytometry: The optimised protocol for the detection of replicational activity using 5-Bromo-2'-deoxyuridine, low concentration of hydrochloric acid and exonuclease III.

    Science.gov (United States)

    Ligasová, Anna; Konečný, Petr; Frydrych, Ivo; Koberna, Karel

    2017-01-01

    The approach for the detection of replicational activity in cells using 5-bromo-2'-deoxyuridine, a low concentration of hydrochloric acid and exonuclease III is presented in the study. The described method was optimised with the aim to provide a fast and robust tool for the detection of DNA synthesis with minimal impact on the cellular structures using image and flow cytometry. The approach is based on the introduction of breaks into the DNA by the low concentration of hydrochloric acid followed by the subsequent enzymatic extension of these breaks using exonuclease III. Our data showed that the method has only a minimal effect on the tested protein localisations and is applicable both for formaldehyde- and ethanol-fixed cells. The approach partially also preserves the fluorescence of the fluorescent proteins in the HeLa cells expressing Fluorescent Ubiquitin Cell Cycle Indicator. In the case of the short labelling pulses that disabled the use of 5-ethynyl-2'-deoxyuridine because of the low specific signal, the described method provided a bright signal enabling reliable recognition of replicating cells. The optimized protocol was also successfully tested for the detection of trifluridine, the nucleoside used as an antiviral drug and in combination with tipiracil also for the treatment of some types of cancer.

  11. Inhibition Behaviour of Some Isonicotinic Acid Hydrazides on the Corrosion of Mild Steel in Hydrochloric Acid Solution

    Directory of Open Access Journals (Sweden)

    M. P. Chakravarthy

    2013-01-01

    Full Text Available New corrosion inhibitors, namely, isonicotinic acid (1H-indol-3-yl-methylenehydrazide (INIMH and isonicotinic acid (1H-pyrrol-2-yl-methylenehydrazide (INPMH, have been synthesized, and their inhibitive characteristics for the corrosion of mild steel in 0.5 M HCl were investigated by mass loss and electrochemical techniques. The structures of the synthesized compounds were confirmed using spectral studies. Potentiodynamic polarization studies revealed that the investigated inhibitors are of mixed type. Various thermodynamic parameters were evaluated. Langmuir adsorption isotherm was found to be the best description for both inhibitors. FTIR spectra, energy dispersive X-ray spectroscopy (EDX, and scanning electron microscopy (SEM were performed to characterize the passive film on the metal surface.

  12. A two-stage pretreatment process using dilute hydrochloric acid followed by Fenton oxidation to improve sugar recovery from corn stover.

    Science.gov (United States)

    Li, Wenzhi; Liu, Qiyu; Ma, Qiaozhi; Zhang, Tingwei; Ma, Longlong; Jameel, Hasan; Chang, Hou-Min

    2016-11-01

    A two-stage pretreatment process is proposed in this research in order to improve sugar recovery from corn stover. In the proposed process, corn stover is hydrolyzed by dilute hydrochloric acid to recover xylose, which is followed by a Fenton reagent oxidation to remove lignin. 0.7wt% dilute hydrochloric acid is applied in the first stage pretreatment at 120°C for 40min, resulting in 81.0% xylose removal. Fenton reagent oxidation (1g/L FeSO4·7H2O and 30g/L H2O2) is performed at room temperature (about 20°C) for 12 has a second stage which resulted in 32.9% lignin removal. The glucose yield in the subsequent enzymatic hydrolysis was 71.3% with a very low cellulase dosage (3FPU/g). This two-stage pretreatment is effective due to the hydrolysis of hemicelluloses in the first stage and the removal of lignin in the second stage, resulting in a very high sugar recovery with a low enzyme loading. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Studies on quality improvement in wheat gluten's physical and chemical properties by hydrochloric acid treatment%盐酸处理对谷朊粉理化性质改良的研究

    Institute of Scientific and Technical Information of China (English)

    张德欣

    2012-01-01

    利用盐酸处理改善谷朊粉的溶解度、乳化性、起泡性等理化性质,研究盐酸与谷朊粉的相对浓度、反应温度、反应时间、盐酸浓度对谷朊粉理化性质的影响.结果表明,盐酸处理改良谷朊粉理化性质的最佳条件:谷朊粉质量百分比为8%,盐酸:谷朊粉为3.5:100(质量比),反应温度65℃.试验证明,盐酸处理对谷朊粉的溶解度、乳化性及其稳定性、起泡性及其稳定性都有显著作用.%Using hydrochloric acid treatment improves the gluten's physical and chemical properties of solubility-, emulsiftcation, foaming ability ami etc. The effects of several physical and chemical properties were researched, of hydrochloric acid and gluten relative concentration, reaction temperature, reaction time, hydrochloric acid coticentratioa on gluten. Test results showed that the rn-odified gluten hydrochloric acid treatiment for the optimum conditions of the physical and chemical properties were;mass contest of gluten %%, Hydrochloric acid to gluten 3. 5 · 100 (mass), reaction temperature 65℃, The.experiments proved! that Hydrochloric acid treatment on the gluten's solubility, emulsification and its stability, foaming ability are significantly.

  14. Extraction of Sm(IIIand Nd(III with N,N,N’,N’-tetrabutyl-3-oxy-diglycolamidefrom hydrochloric acid

    Directory of Open Access Journals (Sweden)

    Yang J.H.

    2013-01-01

    Full Text Available The extraction behavior of Sm(III and Nd(III with N,N,N’,N’-tetrabutyl-3-oxa-diglycolamide (TBDGA in 70% kerosene-30% n-octanol from hydrochloride acid wasstudied. The effect of hydrochloric acid concentration, extractant concentration,and temperature on the distribution of rare earth elementswas investigated. The extraction mechanism was established and the stoichiometry of the main extracted species was confirm to be SmCl3•2TBDGA and NdCl3•2TBDGA for Sm(III and Nd(III, respectively. The extraction distribution ratio decreases with an increase in temperature, which demonstrates that the extraction reaction is exothermic. The IR spectra of the loaded organic phase and free extractant were recorded and discussed.

  15. Pharmacokinetics and tissue residues of hydrochloric acid albendazole sulfoxide and its metabolites in crucian carp (Carassius auratus) after oral administration.

    Science.gov (United States)

    Li, Zaijian; Chen, Cuilan; Ai, Diyun; Wang, Chunmei; Li, Jing; Qi, Yuanhua; Yi, Weixue; Shen, Hongchun; Cao, Jiyue

    2012-03-01

    The pharmacokinetics and residues elimination of hydrochloric acid albendazole sulfoxide (ABZSO) and its metabolites were studied in healthy crucian carp (Carassius auratus, 250 ± 30 g) kept at water temperatures of 10 °C and 25 °C. The concentrations of ABZSO and its metabolites concentration in plasma and tissues were determined using high-performance liquid chromatography (HPLC) using an ultraviolet detector. The results revealed that the plasma concentration of ABZSO in plasma was significantly higher than that of albendazole sulfone (ABZSO(2)), whereas albendazole-2-aminosulfone (ABZ-SO(2)NH(2)) was not detected. The plasma concentrations of ABZSO and its main metabolite ABZSO(2) concentration-time data were fitted using a single-compartment model at 10 °C and 25 °C. The absorption half-life (t₁/₂ka) of ABZSO was 3.86 h at 10 °C and 1.29 h at 25 °C, whereas the elimination half-life (t₁/₂ke) was 16.34 h at 10 °C and 6.72 h at 25 °C; the maximum plasma concentration (C(max)) and the time-point of maximum plasma concentration (T(p)) were calculated as 3.20 μg mL(-1) and 10.58 h at 10 °C, 4.39 μg mL(-1) and 3.80 h at 25 °C. The distribution volume (V(d)/F) of ABZSO was estimated to be 1.99 L kg(-1) at 10 °C and 1.53 L kg(-1) at 25 °C; the total body clearance (CL(b)) of ABZSO were computed as 0.08 and 0.19 L/(h kg) at 10 and 25 °C, respectively; the areas under the concentration-time curve (AUC) was 118.22 μg mL(-1)h at 10 °C and 63.12 μg mL(-1)h at 25 °C. The [Formula: see text] of ABZSO(2) was found to be 6.39 °C at 10 °C and 3.73 h at 25 °C, whereas the [Formula: see text] was 12.86 h at 10 °C and 6.56 h at 25 °C; the C(max) and T(p) of ABZSO(2) was calculated as 0.78 μg mL(-1) and 12.82 h at 10 °C, 1.03 μg mL(-1) and 7.04 h at 25 °C, respectively; the V(d)/F of ABZSO(2) were estimated to be 6.43 L kg(-1) at 10 °C and 4.61 Lkg(-1) at 25 °C; the CL(b) of ABZSO(2) were computed as 0.34 and 0.49 L/(h kg) at 10 °C and 25

  16. Electrochemical measurements for the corrosion inhibition of mild steel in 1 M hydrochloric acid by using an aromatic hydrazide derivative

    Directory of Open Access Journals (Sweden)

    P. Preethi Kumari

    2017-07-01

    Full Text Available The influence of an aromatic hydrazide derivative, 2-(3,4,5-trimethoxybenzylidene hydrazinecarbothioamide (TMBHC as corrosion inhibitor on mild steel in 1 M hydrochloric acid was studied by Tafel polarization and electrochemical impedance spectroscopy (EIS technique. The results showed that the inhibition efficiency (% IE of TMBHC increased with increasing inhibitor concentrations and also with increase in temperatures. TMBHC acted as a mixed type of inhibitor and its adsorption on mild steel surface was found to follow Langmuir’s adsorption isotherm. The evaluation of thermodynamic and activation parameters indicated that the adsorption of TMBHC takes place through chemisorption. The formation of protective film was further confirmed by scanning electron microscopy (SEM.

  17. Study on the inhibition of mild steel corrosion by 1,3-bis-(morpholin-4-yl-phenyl-methyl-thiourea in hydrochloric acid medium

    Directory of Open Access Journals (Sweden)

    Devaraj Karthik

    2014-12-01

    Full Text Available 1,3-Bis-(morpholin-4-yl-phenyl-methyl-thiourea (MBT was synthesized and their influence on the inhibition of corrosion on mild steel in various hydrochloric acid concentrations has been investigated by weight loss, potentiodynamic polarization, electrochemical impedance (EI, Tafel polarization, scanning electron microscope (SEM and FT-IR methods. The result of weight loss study shows that the corrosion inhibition efficiency (IE is directly proportional to the concentration of the inhibitor and inversely proportional to the temperature. Electrochemical study proved that the inhibitor acts as a mixed type inhibitor. SEM shows the formation of a protective film of the inhibitor on the mild steel. The IR data also provide evidence for the anticorrosion effect of the inhibitor.

  18. Experimental and theoretical study for corrosion inhibition of mild steel in normal hydrochloric acid solution by some new macrocyclic polyether compounds

    Energy Technology Data Exchange (ETDEWEB)

    Lebrini, M. [Unite de Catalyse et de Chimie du Solide, CNRS UMR 8181, ENSCL, BP 90108, F-59652 Villeneuve d' Ascq Cedex (France); Lagrenee, M. [Unite de Catalyse et de Chimie du Solide, CNRS UMR 8181, ENSCL, BP 90108, F-59652 Villeneuve d' Ascq Cedex (France); Vezin, H. [Laboratoire de Chimie Organique et Macromoleculaire, CNRS UMR 8009, USTL Bat C4, F-59655 Villeneuve d' Ascq Cedex (France); Traisnel, M. [Laboratoire des Procedes d' Elaboration des Revetements Fonctionnels, PERF UMR 8008, ENSCL, BP 90108, F-59652 Villeneuve d' Ascq Cedex (France); Bentiss, F. [Laboratoire de Chimie de Coordination et d' Analytique, Faculte des Sciences, Universite Chouaib Doukkali, BP 20, M-24000 El Jadida (Morocco)]. E-mail: f.bentiss@pop.ensc-lille.fr

    2007-05-15

    New macrocyclic polyether compounds containing a 1,3,4-thiadiazole moiety have been prepared to study the corrosion inhibitive effect of mild steel in normal hydrochloric acid solutions. The salient features obtained from weight loss and electrochemical impedance spectroscopy (EIS) have been discussed. The results of these investigations have shown enhancement in inhibition efficiencies with the extent of the polyethylene glycol unit that forms a cavity. Data obtained from EIS show a frequency distribution and therefore a modelling element with frequency dispersion behaviour, a constant phase element (CPE) has been used. Display Omitted Adsorption of n-MCTH was found to follow the Langmuir's adsorption isotherm. The thermodynamic functions of adsorption process were calculated from experimental ac impedance data and the interpretation of the results are given. Molecular modelling has been conducted in an attempt to correlate the corrosion inhibition properties with the calculated quantum chemical parameters.

  19. Thermodynamic characterization of metal dissolution and inhibitor adsorption processes in mild steel/2,5-bis(n-thienyl)-1,3,4-thiadiazoles/hydrochloric acid system

    Energy Technology Data Exchange (ETDEWEB)

    Bentiss, F. [Laboratoire de Cristallochimie et Physicochimie du Solide, CNRS UMR 8012 ENSCL, BP 90108, F-59652 Villeneuve d' Ascq Cedex (France); Laboratoire de Chimie de Coordination et d' Analytique, Universite Chouaib Doukkali, Faculte des Sciences, B.P. 20, El Jadida (Morocco); Lebrini, M. [Laboratoire de Cristallochimie et Physicochimie du Solide, CNRS UMR 8012 ENSCL, BP 90108, F-59652 Villeneuve d' Ascq Cedex (France); Lagrenee, M. [Laboratoire de Cristallochimie et Physicochimie du Solide, CNRS UMR 8012 ENSCL, BP 90108, F-59652 Villeneuve d' Ascq Cedex (France)]. E-mail: michel.lagrenee@ensc-lille.fr

    2005-12-15

    The corrosion inhibition of mild steel in 1 M hydrochloric acid solution by some 2,5-bis(n-thienyl)-1,3,4-thiadiazoles (n-TTH) has been studied in relation to the concentration of the inhibitors as well as the temperature using chemical (weight loss) and electrochemical (ac impedance and dc polarisation) techniques. All the methods employed are in reasonable agreement. The protection efficiency increases with increasing inhibitors concentration and with increasing temperature. The thermodynamic functions of dissolution and adsorption processes were calculated from experimental polarisation data and the interpretation of the results are given. Adsorption of n-TTH was found to follow the Langmuir's adsorption isotherm and the ability of the molecule to chemisorb on the steel surface was dependent on the position of the sulphur atom on the thienyl substituent.

  20. Effect of optimized structure and electronic properties of some benzimidazole derivatives on corrosion inhibition of mild steel in hydrochloric acid medium: Electrochemical and theoretical studies

    Indian Academy of Sciences (India)

    Alokdut Dutta; Sujit Sankar Panja; M M Nandi; Dipankar Sukul

    2015-05-01

    The corrosion inhibitive action of a few benzimidazole derivatives namely 2-(benzamido) ethylbenzimidazole (BAEBI), 2-(-benzenesulphonamido) ethylbenzimidazole (BSAEBI), 2-(benzamido) methylbenzimidazole (BAMBI) and 2-(-benzenesulphonamido) methylbenzimidazole (BSAMBI), towards mild steel in hydrochloric acid has been studied using potentiodynamic polarization and electrochemical impedance spectroscopic (EIS) methods. The results show that these compounds get adsorbed on the mild steel surface following Temkin adsorption isotherm, and act as mixed-type inhibitors. The inhibition efficiencies are found to follow the order, BAEBI > BSAEBI > BAMBI > BSAMBI. This observation is explained in terms of chain length, relative effects of amido and sulphonamido groups, possible structural factors, spatial orientations, energy gap between the frontier molecular orbitals, different intrinsic molecular parameters, like, global hardness and softness, and number of electrons transferred.

  1. Inhibition Performance of Furfural on Carbon Steel in Hydrochloric Acid%糠醛对碳钢在盐酸中的缓蚀性能研究

    Institute of Scientific and Technical Information of China (English)

    杨昌炎; 杨光宏; 刘东; 丁一刚; 吴元欣; 戢峻; 李姝

    2011-01-01

    As a corrosion inhibitor, the corrosion inhibition of furfural obtained from straws by microwave pyrolysis was investigated in hydrochloric acid solution. The weight loss and electrochemistry polarization evaluation, and the absorbance of furfural on carbon steel was preliminary discussed. The results showed that furfural, as a complex inhibitor, gives nice inhibition efficiency on carbon steel in hydrochloric acid medium. The inhibition efficiency of furfural was up to 91. 3 % when the mass fraction of furfural reaches 0.7 % at room temperature. It can also reduce the activation energy of corrosion reaction. This results in a decrease of corrosion rate. The inhibition performance of furfural is affected by temperature, and its absorbance behaviors can be expressed by the equation of Langmuir model.%以秸秆催化热解制得的糠醛作为盐酸酸洗缓蚀剂,其缓蚀效率采用失重法和电化学极化法进行了评价,初步探讨其吸附性能.结果表明:糠醛属于混合型缓蚀剂,在盐酸介质中缓蚀作用良好,室温下糠醛添加量为0.7%时,其缓蚀效率可达91.3%,能使碳钢的腐蚀反应活化能降低,腐蚀速率明显下降,同时其缓蚀效率受温度的影响较大,其吸附符合Langmuir吸附规律.

  2. Sequential soil washing techniques using hydrochloric acid and sodium hydroxide for remediating arsenic-contaminated soils in abandoned iron-ore mines.

    Science.gov (United States)

    Jang, Min; Hwang, Jung Sung; Choi, Sang Il

    2007-01-01

    Sequential washing techniques using single or dual agents [sodium hydroxide (NaOH) and hydrochloric acid (HCl) solutions] were applied to arsenic-contaminated soils in an abandoned iron-ore mine area. We investigated the best remediation strategies to maximize arsenic removal efficiency for both soils and arsenic-containing washing solution through conducting a series of batch experiments. Based on the results of a sequential extraction procedure, most arsenic prevails in Fe-As precipitates or coprecipitates, and iron exists mostly in the crystalline forms of iron oxide. Soil washing by use of a single agent was not effective in remediating arsenic-contaminated soils because arsenic extractions determined by the Korean standard test (KST) methods for washed soils were not lower than 6mg kg(-1) in all experimental conditions. The results of X-ray diffraction (XRD) indicated that iron-ore fines produced mobile colloids through coagulation and flocculation in water contacting the soils, containing dissolved arsenic and fine particles of ferric arsenate-coprecipitated silicate. The first washing step using 0.2M HCl was mostly effective in increasing the cationic hydrolysis of amorphous ferrihydrite, inducing high removal of arsenic. Thus, the removal step of arsenic-containing flocs can lower arsenic extractions (KST methods) of washed soils. Among several washing trials, alternative sequential washing using 0.2M HCl followed by 1M HCl (second step) and 1M NaOH solution (third step) showed reliable and lower values of arsenic extractions (KST methods) of washed soils. This washing method can satisfy the arsenic regulation of washed soil for reuse or safe disposal application. The kinetic data of washing tests revealed that dissolved arsenic was easily readsorbed into remaining soils at a low pH. This result might have occurred due to dominant species of positively charged crystalline iron oxides characterized through the sequential extraction procedure. However

  3. Electrochemical Study on Corrosion Inhibition of Copper in Hydrochloric Acid Medium and the Rotating Ring-Disc Voltammetry for Studying the Dissolution

    Directory of Open Access Journals (Sweden)

    A. K. Satpati

    2011-01-01

    Full Text Available Dissolution characteristics of copper in hydrochloric acid medium and the effect of 4-amino 1,2,4-triazole (ATA on the corrosion process have been studied using conventional electrochemical techniques and rotating ring-disc electrodes (RRDEs. Corrosion potential (corr and corrosion current density (corr were obtained by Tafel extrapolation methods. Charge transfer resistance (ct and double-layer capacitance (dl were obtained from the electrochemical impedance spectroscopy (EIS. ATA was shown to be an effective inhibitor for the copper-corrosion inhibition in acid medium. The corrosion rate was retarded in presence of inhibitors mainly because of the adsorption of the inhibitor on the electrode surface. Adsorption of the inhibitor on the metal surface was found to follow the Langmuir adsorption isotherm. Standard free energy change of the adsorption process (Δ0ad was calculated to be −54.3 kJ mol−1; such a large negative value of Δ0ad suggests the prescence of a chemisorption process.

  4. Inhibition performance of thiourea on carbon steel in hydrochloric acid%氢氟酸中硫脲对碳钢缓蚀性能的研究

    Institute of Scientific and Technical Information of China (English)

    韩成利

    2013-01-01

    The adsorption and corrosion inhibition of thiourea on carbon steel in hydrochloric acid has been investigated by weight-loss method.The experimental data have been treated with adsorption theory and sekine method.The result showed that thiourea has efficiently inhibited the corrosion of iron in hydrofluoric acid solution, the adsorption rule of thiourea on the surface of iron obeyed Langmuir isotherm.%采用失质量法研究了硫脲在氢氟酸中对碳钢的吸附及缓蚀作用,并应用吸附理论Sekine方法对实验数据进行处理。结果表明,硫脲对氢氟酸体系中碳钢的腐蚀有良好的抑制作用,硫脲在碳钢片表面产生了吸附,且低浓度下吸附基本符合Langmuir等温式。

  5. Hydrothermal synthesis of highly crystalline RuS{sub 2} nanoparticles as cathodic catalysts in the methanol fuel cell and hydrochloric acid electrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yanjuan [Key Laboratory of Marine Chemistry Theory and Technology, Minisry of Education Ocean University of China, Qingdao, 266100 (China); College of Material Science and Engineering, Key Laboratory of Automobile Materials of Ministry of Education, Jilin University, 2699 Qianjin Street, Changchun 130012 (China); Li, Nan, E-mail: lin@jlu.edu.cn [College of Material Science and Engineering, Key Laboratory of Automobile Materials of Ministry of Education, Jilin University, 2699 Qianjin Street, Changchun 130012 (China); Yanagisawa, Kazumichi [Research Laboratory of Hydrothermal Chemistry, Kochi University, Kochi 780-8520 (Japan); Li, Xiaotian [College of Material Science and Engineering, Key Laboratory of Automobile Materials of Ministry of Education, Jilin University, 2699 Qianjin Street, Changchun 130012 (China); Yan, Xiao [Key Laboratory of Physics and Technology for Advanced Batteries (Ministry of Education), College of Physics, Jilin University, Changchun 130012 (China)

    2015-05-15

    Highlights: • Highly crystalline RuS{sub 2} nanoparticles have been first synthesized by a “one-step” hydrothermal method. • The product presents a pure cubic phase of stoichiometric ratio RuS{sub 2} with average particle size of 14.8 nm. • RuS{sub 2} nanoparticles were used as cathodic catalysts in methanol fuel cell and hydrochloric acid electrolysis. • The catalyst outperforms commercial Pt/C in methanol tolerance and stability towards Cl{sup −}. - Abstract: Highly crystalline ruthenium sulfide (RuS{sub 2}) nanoparticles have been first synthesized by a “one-step” hydrothermal method at 400 °C, using ruthenium chloride and thiourea as reactants. The products were characterized by powder X-ray diffraction (XRD), scanning electron microscopy/energy disperse spectroscopy (SEM/EDS), thermo gravimetric-differential thermal analyze (TG-DTA), transmission electron microscopy equipped with selected area electron diffraction (TEM/SAED). Fourier transform infrared spectra (IR), and X-ray photoelectron spectroscopy (XPS). XRD result illustrates that the highly crystalline product presents a pure cubic phase of stoichiometric ratio RuS{sub 2} and the average particle size is 14.8 nm. SEM and TEM images display the products have irregular shape of 6–25 nm. XPS analyst indicates that the sulfur exists in the form of S{sub 2}{sup 2−}. Cyclic voltammetry (CV), rotating disk electrode (RDE), chronoamperometry (CA) and electrochemical impedance spectroscopy (EIS) measurements are conducted to evaluate the electrocatalytic activity and stability of the highly crystalline RuS{sub 2} nanoparticles in oxygen reduction reaction (ORR) for methanol fuel cell and hydrochloric acid electrolysis. The results illustrate that RuS{sub 2} is active towards oxygen reduction reaction. Although the activity of RuS{sub 2} is lower than that of Pt/C, the RuS{sub 2} catalyst outperforms commercial Pt/C in methanol tolerance and stability towards Cl{sup −}.

  6. 盐酸改性粉煤灰净化低温低浊水的试验研究%The Experimental Research on Purifying Low Temperature and Low Turbidity Water by Hydrochloric Acid Modified Fly Ash

    Institute of Scientific and Technical Information of China (English)

    刘书贤; 魏晓刚; 王伟; 杜平; 肖利萍

    2012-01-01

    由于粉煤灰具有良好的吸附性能且富含硅、铝和铁等元素,将其作为助凝剂,用盐酸对粉煤灰改性后与聚合硫酸铁PFS联合使用处理低温低浊水.在用盐酸对粉煤灰进行改性时,研究了振荡时间、振荡速度、盐酸浓度等试验因素对改性粉煤灰吸附助凝效果的影响,得出盐酸改性粉煤灰的最佳试验条件为:振荡器振荡速度80 r/min,100 mL 3.6 mol/L盐酸与5g预处理粉煤灰混合振荡3h,试验温度25℃.改性后粉煤灰的比表面积明显增加,并且粉煤灰中部分硅、铝和铁等元素溶出,转变成具有很好絮凝作用的Al3+、Fe3+和H2SiO3,粘附于粉煤灰表面,在处理低温低浊水的过程中能较好地发挥吸附助凝效果.%Becaouse of the excellent adsorption performance and high containing of silicon, aluminum and iron and other elements, fly ash by hydrochloric acid modified was used as a coagulant to purify low temperature and low turbidity water with reagent PFS. When the fly ash were modified by hydrochloric acid, the experimental factors just as duration of oscillation, speed of oscillation and hydrochloric acid concentration were researched. The best experimental conditions of hydrochloric acid modification were follows: the speed of oscillation 80r/min, 100 mL 3.6 mol/L of hydrochloric acid and 5 g the coal fly ash mixed in the oscillator for about 3 h, the experiment temperature 25 ℃. The specific surface of modified fly ash increased significantly, the elements such as silicon, aluminum and iron dissolved from fly ash and they turned into Al3+, Fe3+ and H2SiO3 (adhesion on the surface of fly ash) whose flocculation were strong. In the process of purifying low temperature and low turbidity water by hydrochloric acid modified fly ash, the adsorptive property can be exerted effectively.

  7. Role of temperature and hydrochloric acid on the formation of chlorinated hydrocarbons and polycyclic aromatic hydrocarbons during combustion of paraffin powder, polymers, and newspaper.

    Science.gov (United States)

    Takasuga, Takumi; Umetsu, Norihito; Makino, Tetsuya; Tsubota, Katsuya; Sajwan, Kenneth S; Kumar, Kurunthachalam Senthil

    2007-07-01

    Formation of chlorinated hydrocarbons and polycyclic aromatic hydrocarbons (PAHs) were determined using a laboratory-scale incinerator when combusting materials at different temperatures, different concentrations of hydrochloric acid (HCl), and when combusting various types of polymers/newspaper. Polychlorobenzenes (PCBz), polychlorophenols (PCPhs), polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) and their toxic equivalency (TEQ) and PAHs were highlighted and reported. Our results imply maximum formation of chlorinated hydrocarbons at 400 degrees C in the following order; PCBz>or=PCPhs>PCDFs>PCDDs>TEQ on a parts-per-billion level. Similarly, a maximum concentration of chlorinated hydrocarbons was noticed with an HCl concentration at 1000 ppm with the presence of paraffin powder in the following order; PAHs>PCBz>or=PCPhs>PCDFs>PCDDs>TEQ an a parts-per-billion level. PAHs were not measured at different temperatures. Elevated PAHs were noticed with different HCl concentrations and paraffin powder combustion (range: 27-32 microg/g). While, different polymers and newspaper combusted, nylon and acrylonitrile butadiene styrene (ABS) produced the maximum hydrogen cyanide (HCN) concentration, concentrations of PCDD/FS, dioxin-like polychlorinated biphenyls (DL-PCBs), and TEQ were in a decreasing order: polyvinylchloride (PVC)newspapernewspapernewspaper newspapernewspaper

  8. Improve the Properties of p-i-n α-Si:H Thin-Film Solar Cells Using the Diluted Hydrochloric Acid-Etched GZO Thin Films

    Directory of Open Access Journals (Sweden)

    Fang-Hsing Wang

    2013-01-01

    Full Text Available Gallium-doped zinc oxide (GZO thin films were deposited on glass, and the process parameters are RF power of 50 W and working pressure of 5 mTorr, and the substrate temperature was changed from room temperature to 300°C. At first, the thickness was around 300 nm by controlling the deposition time. The effects of substrate temperature on the crystallinity, lattice constant (c, carrier mobility, carrier concentration, resistivity, and optical transmission rate of the GZO thin films were studied. The 200°C-deposited GZO thin films had the best crystallinity, the larger carrier concentration and carrier mobility, and the lowest resistivity. For that, the thickness of the GZO thin films was extended to around 1000 nm. Hydrochloric (HCl acid solutions with different concentrations (0.1%, 0.2%, and 0.5% were used to etch the surfaces of the GZO thin films, which were then used as the substrate electrodes to fabricate the p-i-n α-Si:H thin-film solar cells. The haze ratio of the GZO thin films increased with increasing HCl concentration, and that would effectively enhance light trapping inside the absorber material of solar cells and then improve the efficiency of the fabricated thin-film solar cells.

  9. 盐酸浓度对酸解玉米淀粉结晶结构和性能的影响%Effects of hydrochloric acid concentration on crystalline structure and properties of corn starch

    Institute of Scientific and Technical Information of China (English)

    左迎峰; 张彦华; 杨龙; 谭海彦; 顾继友

    2013-01-01

    以玉米淀粉为原料,用盐酸对其酸解制备酸解玉米淀粉.考虑盐酸浓度对酸解玉米淀粉结构和性能的影响.通过抽滤洗涤法、X射线衍射(XRD)、旋转粘度计、差示扫描量热法(DSC)和热重分析(TGA)对酸解淀粉的回收率、结晶度、糊化粘度、糊化温度和热性能进行分析.结果表明,酸解玉米淀粉的回收率、结晶度和糊化温度随盐酸浓度的增大,先增大后减小,盐酸浓度为0.5 mol/L时,回收率、结晶度和糊化温度都达到最大值;糊化粘度随盐酸浓度的增大而迅速减小;酸解改性对玉米淀粉的热稳定性影响较小.%Acid hydrolysis corn starch was prepared by hydrochloric acid method to study the effects of hydrochloric acid concentrations on the structure and properties of acid hydrolysis com starch.. The crystallinity, gelatinization viscosity, gelatinization temperature and thermal performance of acid hydrolysis starch were analyzed by using filtration washing method, X-ray diffraction, rotational viscometer, differential scanning calorimetry and thermo gravimetric analysis, respectively. The results show that the recovery yield, crystallinity and gelatinization temperature increased first and then decreased with the increase of hydrochloric acid concentration, and reached the maximum values when hydrochloric acid concentration was 0.5 mol/L; the gelatinization viscosity rapidly decreased with increase of hydrochloric acid concentration. So the acid modification had small effect on thermal stability of corn starch.

  10. 没食子酸在含盐酸高温液态水中的稳定性%Stability of Gallic Acid in High Temperature Water with Hydrochloric Acid

    Institute of Scientific and Technical Information of China (English)

    张迎杰; 傅杰; 刘林; 吕秀阳

    2013-01-01

    The stability of gallic acid in high temperature water with hydrochloric acid was studied in a high-pressure batch reactor.The effects of initial concentration of gallic acid,concentration of hydrochloric acid and reaction temperature on the stability of gallic acid were investigated.The results indicated that HC1 concentration was an important factor to the stability of gallic acid,in which the stability of gallic acid decreased as the concentration of HC1 increased.Reaction temperature influenced the stability of gallic acid significantly.As the temperature increased,the conversion of gallic acid increased rapidly,whereas the stability of gallic acid decreased remarkably.Below 413.15 K,gallic acid was relatively stable in HC1 solutions.The kinetic data of the study obtained at different hydrochloric acid concentrations and reaction temperatures were fitted with a pesudo-first-order kinetic equation.The apparent activation energy for the decarboxylation of gallic acid at different hydrochloric acid concentration was obtained by Arrhenius equation.All the obtained apparent activation energy values were close to 112 kJ/mol and not sensitive to the HCl concentration.%采用间歇高压反应釜研究了没食子酸在含盐酸高温液态水中的稳定性.在数据重现性研究基础上,考察了没食子酸初始浓度、盐酸浓度和反应温度等对没食子酸稳定性的影响.结果表明:盐酸浓度对没食子酸的稳定性有较显著的影响,且随着盐酸浓度的增加,稳定性下降:温度对没食子酸稳定性影响十分显著,随着温度的升高,没食子酸转化速率快速增加,稳定性显著降低,但在413.15 K以下没食子酸在盐酸溶液中有较好的稳定性.采用拟一级反应动力学方程,拟合得到了不同盐酸浓度和反应温度下的反应速率常数,进而利用Arrhenius方程得到了不同盐酸浓度没食子酸脱羧反应的表观活化能,表明在盐酸存在下,没食子酸脱羧反

  11. Synthesis and characterization of a novel eco-friendly corrosion inhibition for mild steel in 1 M hydrochloric acid.

    Science.gov (United States)

    Al-Amiery, Ahmed A; Binti Kassim, Fatin A; Kadhum, Abdul Amir H; Mohamad, Abu Bakar

    2016-01-22

    The acid corrosion inhibition process of mild steel in 1 M HCl by azelaic acid dihydrazide has been investigated using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, open circuit potential (OCP) and electrochemical frequency modulation (EFM). Azelaic acid dihydrazide was synthesized, and its chemical structure was elucidated and confirmed using spectroscopic techniques (infrared, nuclear magnetic resonance and mass spectroscopy). Potentiodynamic polarization studies indicate that azelaic acid dihydrazide is a mixed-type inhibitor. The inhibition efficiency increases with increased inhibitor concentration and reaches its maximum of 93% at 5 × 10(-3) M. The adsorption of the inhibitor on a mild steel surface obeys Langmuir's adsorption isotherm. The effect of te perature on corrosion behavior in the presence of 5 × 10(-3) M inhibitor was studied in the temperature range of 30-60 °C. The results indicated that inhibition efficiencies were enhanced with an increase in concentration of inhibitor and decreased with a rise in temperature. To inspect the surface morphology of inhibitor film on the mild steel surface, scanning electron microscopy (SEM) was used before and after immersion in 1.0 M HCl.

  12. Operational aspect of hot water style 2-in-1 graphite hydrochloric acid furnace%热水型二合一石墨盐酸炉的运行情况

    Institute of Scientific and Technical Information of China (English)

    吕旭琦; 冯海平

    2012-01-01

    通过改造传统工艺盐酸炉为热水型二合一石墨盐酸炉,回收盐酸生产中产生的热量制热水。采用热水型溴化锂制冷机组制7℃水供生产用。工艺改造后,达到了节能减排预期目标。%The tradition graphite hydrochloric acid furnace was transformed into hot water style 2-in-1 graphite hydrochloric acid furnace.The hot water was used to produce 7℃ water.After process transformation,the ammonia refrigerating machine was stoped and the power consumption reduced,the energy conservation goals were achieved.

  13. Kinetic Approach to the Mechanism of Redox Reaction of Pyrocatechol Violet and Nitrite Ion in Aqueous Hydrochloric Acid

    Directory of Open Access Journals (Sweden)

    A. Adetoro

    2011-10-01

    Full Text Available The kinetics of the oxidation of Pyrocatechol violet (PCVH by nitrite ion (NO2- in aqueous acidic medium has been studied at 24±1ºC, I = 0.50 mol/dm3(NaCl, [H+] = 1.0×10-3 mol/dm3. The reaction is first order to [PCVH] and half order to [NO2-]. The redox reaction displayed a 1:1 stoichiometry and obeys the rate law: d[PCVH]/dt = (a + b[H+] [PCVH][NO2-]½. The second-order rate constant increases with increase in acid concentration and ionic strength. This system displayed positive salt effect while spectroscopic investigation and Michaelis-Menten plot showed evidence of intermediate complex formation in the course of the reaction. A plausible mechanism has been proposed for the reaction.

  14. 盐酸法提取污泥中蛋白质过程的研究%Study on the Processes of Protein Extraction from Sludge by Hydrochloric Acid

    Institute of Scientific and Technical Information of China (English)

    秦晓; 刘勇

    2012-01-01

    为了探索剩余污泥中蛋白质的提取方法,采用盐酸和氢氧化钠对污泥中蛋白质进行了提取,并对提取液进行了紫外光谱分析.结果证明盐酸提取法更有利于污泥中蛋白质的提取操作,并可以保证蛋白质质量.随后,实验考察了温度、污泥浓度、盐酸浓度以及操作时间对提取液中蛋白质浓度的影响情况.结果表明:蛋白质浓缩随温度呈先慢后快的增加趋势,随污泥浓度呈线性增加趋势,随盐酸浓度呈先快后慢增加趋势,适当延长时间有利于提升提取液中的蛋白质浓度.%In order to explore the methods of protein extraction from sludge, firstly, hydrochloric acid and sodium hydroxide were used to extract protein in this paper, and then the extracts were analyzed by UV spectrum. The results showed that hydrochloric acid extraction method was more conducive to the protein extraction and could ensure the protein quality. Subsequently, the effects of temperature, sludge concentration, hydrochloric acid concentration and operating time on protein concentration in the extract were experimentally investigated in detail. The results show that: the change trend of the protein concentration in the extract with temperature is slow after fast, with sludge concentration is linear, with hydrochloric acid is fast before slow, and appropriate extension of time will help to enhance the protein concentration in the extract.

  15. 盐酸戊乙奎醚治疗有机磷农药中毒临床分析%Clinical Analysis of Hydrochloric Acid Penehyclidine in Treatmentof Organophosphorus Pesticide Poisoning

    Institute of Scientific and Technical Information of China (English)

    曹振强; 汪显琪

    2012-01-01

    Objective: To investigate the efficacy and clinical significance of hydrochloric acid penehyclidine in the treatment of organophosphorus pesticide poisoning. Method: Chosing 126 cases of organophosphorus pesticide poisoning patients. Then explored the comprehensive methods of hydrochloric acid penehyclidine treatment. Result: After 3 to 5 days of comprehensive hydrochloric acid penehyclidine treatment, 122 patients escaped from danger successfully and 4 patients died. Another 15 patients responded with dry mouth , flushing face and so on, and then was cured slowly after stopping the treatment. Conclusion: Hydrochloric acid penehyclidine is characteristic of long-lasting time, simple operation and so on. It is of better clinical utility and safety, and can obviously speed up the level of consciousness, reduce treatment time and improve the treatment success rate for organophosphorus pesticide poisoning patients.%目的:探讨盐酸戊乙奎醚治疗有机磷农药中毒病症的疗效及临床意义.方法:选取我院急诊科126例有机磷农药中毒患者,探讨盐酸戊乙奎醚治疗的综合方法,并结合实际分析其效果.结果:经盐酸戊乙奎醚综合治疗3-5d后,122例患者成功脱险,死亡4例.有15例出现口干、面红等不良反应,停药后自行缓解.结论:盐酸戊乙奎醚具有持续时间长、操作简便等特点,具有更好的临床实用性和安全性,对于有机磷农药中毒患者能明显加快清醒程度,缩短时间,提高救治成功率.

  16. Formation of super-concentrated hydrochloric acid in the third phase in tertiary amine N235-PtCl62--HCl system and its influences on the Pt microemulsion extraction

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    In this paper,we have investigated the formation of the third-phase in tertiary amine(N235)-PtCl62--HCl system and the microscopic phase structural evolution of platinum-loaded organic phases before and after the occurrence of the third-phase.The third-phase is characterized by various spectroscopic techniques,and the small angle X-ray scattering(SAXS) experiments demonstrate the appearance of nano-aggregates,i.e.,water-in-oil reversed micelles,in the third phase.The experimental results indicate that(1) formation of the third phase is related to the aggregation behaviors of nano-reversed micelles in which a super-concentrated hydrochloric acid formed with the H+ to H2O molar ratio being much higher than that of the conventional 37 wt% saturated hydrochloric acid.(2) The occurrence of the super-concentrated HCl results in a great amount of H+ and Cl-ions enriched and confined within the nano-water pools of W/O reversed micelles in third phase.Therefore,the coordination behaviors of platinum complex ions in that super-concentrated hydrochloric acid are very different from their corresponding behaviors in bulk aqueous solutions.It is possible that H+ ions participate in the formation of such complexes as HmPtCl6z+ in the super-concentrated hydrochloric acid.(3) The relative contents of various HmPtCl6z+ complexes are different corresponding to the H+ ion concentrations in confined nanowater pools.The association ability of the acidified tertiary amine N235 molecules(R3NH+) with various HmPtCl6z+ complexes plays an important role in affecting the platinum extraction behaviors.

  17. Chemical Polymerization Kinetics of Poly-O-Phenylenediamine and Characterization of the Obtained Polymer in Aqueous Hydrochloric Acid Solution Using K2Cr2O7 as Oxidizing Agent

    Directory of Open Access Journals (Sweden)

    S. M. Sayyah

    2014-01-01

    Full Text Available The oxidative chemical polymerization of o-phenylenediamine (OPDA was studied in hydrochloric acid solution using potassium dichromate as oxidant at 5°C. The effects of potassium dichromate, hydrochloric acid, and monomer concentrations on the polymerization reaction were investigated. The order of reaction with respect to potassium dichromate, hydrochloric acid, and monomer concentration was found to be 1.011, 0.954, and 1.045, respectively. Also, the effect of temperature on the polymerization rate was studied and the apparent activation energy of the polymerization reaction was found to be 63.658 kJ/mol. The obtained polymer was characterized using XPS, IR, UV-visible, and elemental analysis. The surface morphology of the obtained polymers was characterized by X-ray diffraction and transmission electron microscopy (TEM. The TGA analysis was used to confirm the proposed structure and number of water molecules in each polymeric chain unit. The ac conductivity (σac of (POPDA was investigated as a function of frequency and temperature. The ac conductivity was interpreted as a power law of frequency. The frequency exponent (s was found to be less than unity and decreased with the increase of temperature, which confirms that the correlated barrier hopping model was the dominant charge transport mechanism.

  18. Treasure of the Past VI: Standard Potential of the Silver-Silver-Chloride Electrode from 0° to 95° C and the Thermodynamic Properties of Dilute Hydrochloric Acid Solutions.

    Science.gov (United States)

    Bates, R G; Bower, V E

    2001-01-01

    From electromotive-force measurements of the cell without liquid junction: [Formula: see text]through the range 0° to 95° C, calculations have been made of (1) the standard potential of the silver-silver-chloride electrode, (2) the activity coefficient of hydrochloric acid in aqueous solutions from m (molality) =0 to m=0.1 and from 0° to 90° C, (3) the relative partial molal heat content of hydrochloric acid, and (4) the relative partial molal heat capacity of hydrochloric acid. The extrapolations were made by the method of least squares with the aid of punch-card techniques. Data from at least 24 cells were analyzed at each temperature, and 81 cells were studied at 25° C. The value of the standard potential was found to be 0.22234 absolute volt at 25° C, and the standard deviation was 0.02 millivolt at 0° C, 0.01 millivolt at 25° C, and 0.09 millivolt at 95° C. The results from 0° to 60° C are compared with earlier determinations of the standard potential and other quantities derived from the electromotive force.

  19. Trapping of hydrochloric and hydrofluoric acid at vacancies on and underneath the ice I(h) basal-plane surface.

    Science.gov (United States)

    Pinheiro Moreira, Pedro Augusto Franco; de Koning, Maurice

    2013-10-31

    We investigate the uptake of HCl and HF at lattice vacancies in ice Ih as a function of their distance to the basal-plane surface layer using density-functional theory calculations. The results for HCl display large dispersions in the binding-energy results due to the appearance of distinct dissociation states. The layer-averaged results suggest that the uptake of HCl is most favorable in the two layers just below the surface, which is consistent with available experimental indications. The behavior of HF is found to be manifestly different due to the fact that it is a weaker acid. The dispersion in the binding-energy values is significantly less compared to the case of HCl, and the average values are essentially equal to the bulk value, regardless of layer position. This suggests that, in contrast to the case of HCl, there should not be any tendency for accumulation of HF near the surface.

  20. [Suicidal poisoning due to hydrogen sulfide produced by mixing a liquid bath essence containing sulfur and a toilet bowl cleaner containing hydrochloric acid].

    Science.gov (United States)

    Kobayashi, Kanya; Fukushima, Hirofumi

    2008-04-01

    A 21-year-old man was found dead in a car. There were 9 empty bottles of 610HAP (a 440 g bottle of a liquid bath essence containing 160-195 g/kg sulfur) and 10 of Sunpole (a 500 mL bottle of a toilet bowl cleaner containing 9.5% HCl) in the car. The car doors were sealed with tape, and there was a strong smell of sulfur in and around the car. GC/MS analysis showed 0.66 microg/mL sulfide and 0.14 micromol/mL thiosulfate in the blood sample. The concentration of thiosulfate in the urine sample was normal. Police investigation concluded that the man killed himself by aspirating hydrogen sulfide that had been produced by mixing 610 HAP and Sunpole. To examine the amount of hydrogen sulfide produced, small portions of these liquids were mixed in a 560-mL volume flask. The results showed that 0.1 mL of each liquid produced 4,950 ppm of hydrogen sulfide, and 0.2 mL of each produced 10,800 ppm. According to these results, if the cabin volume is assumed to be 3,300 L, mixing 120 mL of each liquid produces a lethal level of hydrogen sulfide, i.e., 1,000 ppm. This was a rare suicide case, and it revealed the hazards of mixing of liquid bath essences containing sulfur and toilet bowl cleaners containing hydrochloric acid.

  1. Oxidative leaching process with cupric ion in hydrochloric acid media for recovery of Pd and Rh from spent catalytic converters

    Energy Technology Data Exchange (ETDEWEB)

    Nogueira, C.A., E-mail: carlos.nogueira@lneg.pt [Laboratório Nacional de Energia e Geologia, I.P., Campus do Lumiar, 1649-038 Lisboa (Portugal); Paiva, A.P., E-mail: appaiva@fc.ul.pt [Centro de Química e Bioquímica, Departamento de Química e Bioquímica, Faculdade de Ciências da Universidade de Lisboa, 1749-016 Lisboa (Portugal); Oliveira, P.C. [Laboratório Nacional de Energia e Geologia, I.P., Campus do Lumiar, 1649-038 Lisboa (Portugal); Costa, M.C., E-mail: mcorada@ualg.pt [Centro de Ciências do Mar, Departamento de Química e Farmácia, Faculdade de Ciências e de Tecnologia, Campus de Gambelas, 8005-139 Faro (Portugal); Costa, A.M. Rosa da, E-mail: amcosta@ualg.pt [Centro de Investigação em Química do Algarve, Departamento de Química e Farmácia, Faculdade de Ciências e de Tecnologia, Campus de Gambelas, 8005-139 Faro (Portugal)

    2014-08-15

    Highlights: • A new leaching process based on Cu{sup 2+}/HCl media for recovering Pd and Rh from spent autocatalytic converters is presented. • Palladium and rhodium were efficiently leached, with attained maximum yields of 95% and 86%, respectively. • Temperature, time, and HCl and Cu{sup 2+} concentrations were found to be significant factors in the leaching of Pd and Rh. - Abstract: The recycling of platinum-group metals from wastes such as autocatalytic converters is getting growing attention due to the scarcity of these precious metals and the market pressure originated by increase of demand in current and emerging applications. Hydrometallurgical treatment of such wastes is an alternative way to the most usual pyrometallurgical processes based on smelter operations. This paper focuses on the development of a leaching process using cupric chloride as oxidising agent, in HCl media, for recovery of palladium and rhodium from a spent catalyst. The chloride media allows the adequate conditions for oxidising and solubilising the metals, as demonstrated by equilibrium calculations based on thermodynamic data. The experimental study of the leaching process revealed that Pd solubilisation is clearly easier than that of Rh. The factors temperature, time, and HCl and Cu{sup 2+} concentrations were significant regarding Pd and Rh leaching, the latter requiring higher factor values to achieve the same results. Leaching yields of 95% Pd and 86% Rh were achieved under optimised conditions (T = 80 °C, t = 4 h, [HCl] = 6 M, [Cu{sup 2+}] = 0.3 M)

  2. Oxidative leaching process with cupric ion in hydrochloric acid media for recovery of Pd and Rh from spent catalytic converters.

    Science.gov (United States)

    Nogueira, C A; Paiva, A P; Oliveira, P C; Costa, M C; da Costa, A M Rosa

    2014-08-15

    The recycling of platinum-group metals from wastes such as autocatalytic converters is getting growing attention due to the scarcity of these precious metals and the market pressure originated by increase of demand in current and emerging applications. Hydrometallurgical treatment of such wastes is an alternative way to the most usual pyrometallurgical processes based on smelter operations. This paper focuses on the development of a leaching process using cupric chloride as oxidising agent, in HCl media, for recovery of palladium and rhodium from a spent catalyst. The chloride media allows the adequate conditions for oxidising and solubilising the metals, as demonstrated by equilibrium calculations based on thermodynamic data. The experimental study of the leaching process revealed that Pd solubilisation is clearly easier than that of Rh. The factors temperature, time, and HCl and Cu(2+) concentrations were significant regarding Pd and Rh leaching, the latter requiring higher factor values to achieve the same results. Leaching yields of 95% Pd and 86% Rh were achieved under optimised conditions (T = 80 °C, t = 4h, [HCl] = 6M, [Cu(2+)] = 0.3M).

  3. Effect of three component (aniline–formaldehyde and piperazine polymer on mild steel corrosion in hydrochloric acid medium

    Directory of Open Access Journals (Sweden)

    K.R. Ansari

    2015-10-01

    Full Text Available Polymeric Schiff base containing aniline, formaldehyde and piperazine (AFPP was synthesized and investigated as corrosion inhibitor for mild steel in 1 M HCl by weight loss measurements, electrochemical impedance spectroscopy (EIS and potentiodynamic polarization techniques. Experimental results showed that AFPP is an effective inhibitor for mild steel in 1 M HCl and exhibited 98% inhibition efficiency. Potentiodynamic polarization studies showed that AFPP is a mixed-type inhibitor predominantly cathodic type. The adsorption of inhibitor on the mild steel surface followed Langmuir adsorption isotherm. Activation energy (Ea, standard energy of adsorption (ΔG°ads, enthalpy of activation (ΔH∗, and entropy of activation (ΔS∗ of corrosion process were calculated and discussed.

  4. Microstructures of Al7.5Cr22.5Fe35Mn20Ni15 High-Entropy Alloy and Its Polarization Behaviors in Sulfuric Acid, Nitric Acid and Hydrochloric Acid Solutions

    Directory of Open Access Journals (Sweden)

    Chun-Huei Tsau

    2016-08-01

    Full Text Available This paper investigates the microstructures and the polarization behaviors of Al7.5Cr22.5Fe35Mn20Ni15 high-entropy alloy in 1M (1 mol/L deaerated sulfuric acid (H2SO4, nitric acid (HNO3, and hydrochloric acid (HCl solutions at temperatures of 30–60 °C. The three phases of the Al7.5Cr22.5Fe35Mn20Ni15 high-entropy alloy are body-centered cubic (BCC dendrites, face-centered cubic (FCC interdendrites, and ordered BCC precipitates uniformly dispersed in the BCC dendrites. The different phases were corroded in different acidic solutions. The passivation regions of the Al7.5Cr22.5Fe35Mn20Ni15 alloy are divided into three and two sub-regions in the solutions of H2SO4 and HNO3 at 30–60 °C, respectively. The passivation region of the Al7.5Cr22.5Fe35Mn20Ni15 alloy is also divided into two sub-domains in 1M deaerated HCl solution at 30 °C. The Al7.5Cr22.5Fe35Mn20Ni15 alloy has almost equal corrosion resistance in comparison with 304 stainless steel (304SS in both the 1M H2SO4 and 1M HCl solutions. The polarization behaviors indicated that the Al7.5Cr22.5Fe35Mn20Ni15 alloy possessed much better corrosion resistance than 304SS in 1M HNO3 solution. However, in 1M NaCl solution, the corrosion resistance of the Al7.5Cr22.5Fe35Mn20Ni15 alloy was less than 304SS.

  5. Corrosão de cerâmicas à base de Si3N4 em soluções aquosas de HCl 0,1 N Corrosion of Si3N4 ceramics in 0.1 N hydrochloric acid solution

    Directory of Open Access Journals (Sweden)

    F. Vernilli Júnior

    1999-06-01

    Full Text Available O comportamento à corrosão de cerâmicas à base de Si3N4 contendo misturas de Y2O3/SiO2 e RE2O3/SiO2 como aditivos nas proporções de 14 e 21% em volume ambos na estequiometria dos dissilicatos Y2Si2O7 e RE2Si2O7, respectivamente, foi estudado em soluções aquosas de HCl 0,1N a 100 °C. A resistência à corrosão foi avaliada pela perda de massa das amostras e análise química das soluções após os testes. As análises por microscopia eletrônica das amostras atacadas revelou que basicamemte a fase vítrea intergranular foi dissolvida pela solução ácida, deixando um esqueleto de grãos de b-Si3N4 entrelaçados.The corrosion resistance of Si3N4 ceramics with 14 and 21 vol.% of Y2O3/SiO2 and RE2O3/SiO2 mixtures as additive, both in the stoichiometry of disilicates Y2 Si2O7 and RE2Si2O7, respectively, has been investigated in 0.1N HCl solutions. Samples were prepared by a two step gas pressure sintering process, under a final N2 pressure of 10 MPa and a maximum temperature of 1850 °C for 30 min. The corrosion resistance was evaluated by the mass change of polished samples and chemical analysis of the solutions after the tests. Analysis by electron microscopy showed that the glassy intergranular phase is dissolved by the acid solution, leaving a skeleton of interlinked b -Si3N4 grains.

  6. Effects of chopping, and soaking in water, hydrochloric acidic and calcium hydroxide solutions on the nutritional value of Acacia villosa for goats

    Energy Technology Data Exchange (ETDEWEB)

    Wina, E. [Research Institute for Animal Production, Bogor (Indonesia)]. E-mail: winabudi@yahoo.com; Tangendjaja, B.; Susana, I.W.R. [Research Institute for Animal Production, Bogor (Indonesia)

    2005-08-19

    Acacia villosa, a thornless shrub legume, has potential as a feed supplement for ruminants if anti-nutritional factors, especially tannins, can be overcome. The effects of chopping and soaking the leaves on the amounts of tannin in the extracting solution and that left in the recovered leaves were studied. The tannin and non-tannin phenolics were solubilized in the extracting solution and the amount was increased with the soaking time. Soaking in calcium hydroxide solution, hydrochloric acid or water removed 41-76% of tannin and total phenolics removed from the recovered leaves. Soaking of the leaves also removed fermentable materials and reduced the gas production. In the first of two digestibility experiments, three groups of goats received one of these diets, those were: (1) sugar cane tops: unsoaked Acacia leaves (7:3), (2) sugar cane tops: water soaked Acacia leaves (7:3) and (3) sugar cane tops: water soaked Acacia leaves (7:3) + 100 g/day of cassava flour. Live weight of goats was measured every 2 weeks and a large increase in average daily gain was obtained for goats fed diet containing water soaked leaves and cassava flour (71 g/day) compared to those fed diet containing unsoaked leaves and water soaked leaves (38.9 and 44.7 g/day, respectively) (P < 0.05). In the second digestibility experiment, the three diets were: (1) sugar cane tops: unsoaked Acacia (7:3), (2) sugar cane tops water soaked Acacia (7:3), (3) sugar cane tops: calcium hydroxide soaked Acacia (7:3). A supplement of 100 g/day of cassava flour was added to each of these three diets. In both digestibility experiments, soaking improved intake and digestibility of Acacia leaves, and cassava flour increased the intake, but when all the diets contained cassava flour, there was no significant difference (P > 0.05) found in intake or digestibility between unsoaked and soaked leaves. In conclusion, soaking reduced tannin in Acacia leaves, improved digestibility and intake of Acacia leaves. In the

  7. Effect of a low-viscosity adhesive resin on the adhesion of metal brackets to enamel etched with hydrochloric or phosphoric acid combined with conventional adhesives.

    Science.gov (United States)

    Yetkiner, Enver; Ozcan, Mutlu; Wegehaupt, Florian Just; Wiegand, Annette; Eden, Ece; Attin, Thomas

    2013-12-01

    This study investigated the effect of a low-viscosity adhesive resin (Icon) applied after either hydrochloric (HCl) or phosphoric acid (H3PO4) on the adhesion of metal brackets to enamel. Failure types were analyzed. The crowns of bovine incisors (N = 20) were sectioned mesio-distally and inciso-gingivally, then randomly assigned to 4 groups according to the following protocols to receive mandibular incisor brackets: 1) H3PO4 (37%)+TransbondXT (3M UNITEK); 2) H3PO4 (37%)+Icon+TransbondXT; 3) HCl (15%)+Icon (DMG)+TransbondXT 4) HCl (15%)+Icon+Heliobond (Ivoclar Vivadent)+TransbondXT. Specimens were stored in distilled water at 37°C for 24 h and thermocycled (5000x, 5°C to 55°C). The shear bond strength (SBS) test was performed using a universal testing machine (1 mm/min). Failure types were classified according to the Adhesive Remnant Index (ARI). Contact angles of adhesive resins were measured (n = 5 per adhesive) on ceramic surfaces. No significant difference in SBS was observed, implying no difference between combinations of adhesive resins and etching agents (p = 0.712; ANOVA). The Weibull distribution presented significantly lower Weibull modulus (m) of group 3 (m = 2.97) compared to other groups (m = 5.2 to 6.6) (p group 1 (45.4 ± 7.9) > group 2 (44.2 ± 10.6) > group 3 (42.6 ± 15.5). While in groups 1, 3, and 4 exclusively an ARI score of 0 (no adhesive left on tooth) was observed, in group 2, only one specimen demonstrated score 1 (less than half of adhesive left on tooth). Contact angle measurements were as follows: Icon (25.86 ± 3.81 degrees), Heliobond (31.98 ± 3.17 degrees), TransbondXT (35 ± 2.21 degrees). Icon can be safely used with the conventional adhesives tested on surfaces etched with either HCl or H3PO4.

  8. Estudios Cinéticos de la Disolución de Hidroboracita en Soluciones de Acido Clorhídrico y Acido Sulfúrico Dissolution Kinetics of Hydroboracite in Hydrochloric Acid and Sulphuric Acid Solutions

    Directory of Open Access Journals (Sweden)

    Graciela V Morales

    2008-01-01

    Full Text Available Se realizan estudios cinéticos de la disolución de hidroboracita en soluciones de ácido clorhídrico y ácido sulfúrico en un reactor tanque agitado discontinuo de acero inoxidable, a presión atmosférica. Se investiga el efecto de la temperatura, el tamaño de partícula, la relación sólido/líquido y la concentración de ácido sobre la velocidad de disolución. Los resultados experimentales permiten observar que la velocidad de disolución aumenta con el incremento de la concentración del ácido y de la temperatura, y disminuye con el aumento del tamaño de partícula y con la relación sólido/líquido. La energía de activación aparente calculada para la disolución de hidroboracita en soluciones de ácido clorhídrico es 44.9 kJ/mol, lo cual no permite inferir cual es la etapa controlante del proceso; mientras que la energía de activación aparente calculada para la disolución de hidroboracita en soluciones de ácido sulfúrico es 14.6 kJ/mol, lo cual permite inferir que el proceso ocurre con control difusivo.The dissolution kinetics of hydroboracite in hydrochloric acid and sulphuric acid solutions was investigated. The experiments were carried out in a steel batch reactor equipped with a mechanical stirrer, at atmospheric pressure. The effect of reaction temperature, particle size, solid/liquid ratio and acid concentration on the dissolution rate was determined. It was found that the dissolution rate increased with increasing the acid concentration and reaction temperature. However, the increase of particle size and solid/liquid ratio decreased the dissolution rate. The activation energy for the hydroboracite dissolution in hydrochloric acid was calculated as 44.9 kJ/mol, which does not permit to know the process controlling step. The activation energy for the hydroboracite dissolution in sulphuric acid was found to be 14.6 kJ/mol, which indicates that the dissolution is a diffusion controlled process.

  9. Microtensile strength of spruce pine after exposure to acids and bases

    Science.gov (United States)

    Floyd G. Manwiller; Paul R. Godfrey

    1972-01-01

    Earlywood and latewood microtensile specimens from 12 trees of Pinus glabra Wal. were subjected to 10-percent solution of 5 acids and 3 bases at 90oC for up to 3 hours. Hydrochloric and sulfuric acids were the most damaging, lowering maximum tensile strength 27 and 17 percent in earlywood and 36 and 39 percent in latewood; they...

  10. Flow Injection Analysis of Acid and Base using Thermo-Sensitive Resistance Coils

    OpenAIRE

    1995-01-01

    A flow injection analysis of acid-base by detecting neutralization heat is proposed. A injected sample (acid or base), combined with a carrier (deionized water), was mixed with a reagent (base or acid) stream. A change in the solution temperature was detected by passing the solution, immediately after mixing, through a stainless steel capillary tube around which a thermo-sensitive resistance was coiled. The temperature of carrier was used as a reference Hydrochloric acid solutions of 0.003 to...

  11. Limonene as Green Inhibitor for Steel Corrosion in Hydrochloric Acid Solutions%盐酸溶液中钢铁腐蚀的绿色缓蚀剂柠檬油精

    Institute of Scientific and Technical Information of China (English)

    CHAIEB E.; BOUYANZER A.; HAMMOUTI B.; BERRABAH M.

    2009-01-01

    The inhibition of steel corrosion in hydrochloric acid solutions by limonene, which was extracted from citrus and orange fruit, was studied using measurements of mass loss, electrochemical polarisation and electrochemical impedance spectroscopy (EIS) methods. Naturally, the substance reduced the rate of corrosion. The linearity of the cathodic curves for all concentrations indicated that the law of Tafel was followed. The effectiveness of inhibition increased with the increase in concentration of limonene and this exceeded 72% at 0.220 g. L-1. The inhibition efficiency is temperature independent in the temperature range of 298-328 K. Adsorption of the substance on the surface of steel obeys the Frumkin isotherm model.

  12. Investigation of adsorption and inhibitive effect of acid red GRE (183 dye on the corrosion of carbon steel in hydrochloric acid media

    Directory of Open Access Journals (Sweden)

    M. Abd El-raouf

    2015-09-01

    Full Text Available The adsorption and corrosion inhibitive effect of acid red GRE (183 dye on carbon steel alloy in 1 M HCl solutions was studied using various techniques. Results of weight loss, Tafel polarization measurements and electrochemical impedance spectroscopy (EIS techniques show that this compound has fairly good inhibiting properties for steel corrosion in acidic bath; with efficiency around 96% at a concentration of 50 ppm. The inhibition is of a mixed anodic–cathodic nature. Factors affecting the corrosion process have been calculated and discussed. Acid red GRE (183 dye was shown to be an inhibitor in the acidic corrosion. Inhibition efficiency increased with acid red GRE (183 dye concentration but decreased with rise in temperature, corrosion inhibition is attributed to the adsorption of acid red GRE (183 dye on the carbon steel surface via a physical adsorption mechanism. Langmuir isotherm is found to provide an accurate description of the adsorption behavior of the investigated azo compound. The nature of the protective film was investigated using SEM and EDX techniques.

  13. Influence of several nonferrous metals in the treatment of residual liquors from hydrochloric acid pickling processes. Influencia de diversos metales no ferreos en el tratamiento de lejias residuales de decapado con acido clorhidrico

    Energy Technology Data Exchange (ETDEWEB)

    Negro, C.; Cobos, M.A.; Latorre, R.; Dufour, J.; Formoso, A.; Lopez, F.

    1994-01-01

    In the oxiprecipitation of waste liquors from siderurgical processes of pickling with hydrochloric acid, several kinds of iron oxides and oxihydroxides are obtained: alpha-FeOOH, gamma-FeOOH, Fe[sub 3]O[sub 4], gamma-Fe[sub 2]O[sub 3]. Fe[sub 2]O[sub 3].1,2H[sub 2]O, etc. These products can be used like pigments in the painting industry and like raw materials for the obtaining of ferrites. Varying the operation conditions, the presence of these products can be changed greatly, obtaining different mixtures of them. The presence of non-ferrous metals catalyzes and modifies the mechanism of the reaction, yielding pure products. This simplifies their later industrial applications. The aim of this work is to determine the influence of Cu(II), Zn(II), Mo(VI) and Al(III) on the oxiprecipitation of residual liquors from hydrochloric acid pickling processes, selecting the most favourable operation conditions at which it is possible to obtain products for industrial applications.

  14. Biodiesel Production from Spent Fish Frying Oil Through Acid-Base Catalyzed Transesterification

    OpenAIRE

    Abdalrahman B. Fadhil; Mohammed M. Dheyab; Kareem M. Ahmed; Marwa H. Yahya

    2012-01-01

    Biodiesel fuels were prepared from a special type of frying oil namely spent fish frying oil through two step transesterification viz. acid-base catalyzed transesterification. Hydrochloric acid and potassium hydroxide with methanol were used for this purpose. The oil was pre-treated with (1.0 wt% HCl) and methanol to reduce free fatty acids content of the oil. Then, conditions of the base catalyzed step such as base concentration, reaction temperature, methanol to oil molar ratio and reaction...

  15. Design of pH Measurement and Control System Using in Process of NdFeB Waste With Hydrochloric Acid%盐酸优溶法处理NdFeB废料pH测控系统的设计

    Institute of Scientific and Technical Information of China (English)

    周雄军; 逄启寿

    2014-01-01

    The leaching principle of NdFeB waste using hydrochloric acid is introduced .The pH controlling mathematical model for acid dissolving and neutralizating process are established based on leaching mechanism .The overall designing scheme of pH control system in leaching process is put forwarded .%介绍了盐酸优溶法处理NdFeB废料的原理。结合浸出机制,建立了酸溶、中和过程的pH控制数学模型,提出了浸出过程中pH控制系统的整体设计方案。

  16. Dissolution kinetics of aluminum and iron from coal mining waste by hydrochloric acid☆

    Institute of Scientific and Technical Information of China (English)

    Li Cui; Yanxia Guo; Xuming Wang; Zhiping Du; Fangqin Cheng

    2015-01-01

    The extraction of aluminum from coal mining waste (CMW) is an important industrial process. The two major problems in applications are low aluminum dissolution efficiency and high iron content in the raw material, which affect the quantity and quality of products. To improve the aluminum recovery process, the leaching kinet-ics of CMW with hydrochloric acid was studied. A shrinking core model was used to investigate aluminum and iron dissolution kinetics. Based on the kinetic characteristics, a process for recovering aluminum was proposed and tested experimental y. It is found that the aluminum leaching reaction is controlled by surface reaction at low temperatures (40–80 °C) and by diffusion process at higher temperatures (90–106 °C). The iron dissolution process is dominated by surface reaction at 40–100 °C. The results show that iron could be dissolved or separated by concentrated hydrochloric acid. Fine grinding wil improve aluminum dissolution significantly.

  17. Determination of the base composition of deoxyribonucleic acid by measurement of the adenine/guanine ratio

    Science.gov (United States)

    Kirk, J. T. O.

    1967-01-01

    A method is described for determination of the base composition (as guanine+cytosine or adenine+thymine content) of DNA by accurate measurement of the adenine/guanine ratio. The DNA is hydrolysed with 0·03n-hydrochloric acid for 40min. to release the purines. The hydrolysate is subjected to ion-exchange chromatography on Zeo-Karb 225. Apurinic acids are eluted with 0·03n-hydrochloric acid and then guanine and adenine are eluted separately with 2n-hydrochloric acid. Guanine and adenine are each collected as a single fraction, and the amount of base in each case is determined by measuring the volume and the extinction at suitable wavelengths. For use in the calculations, millimolar extinction coefficients in 2n-hydrochloric acid of 12·09 for adenine at 262mμ, and 10·77 for guanine at 248mμ, were determined with authentic samples of bases. The method gives extremely reproducible results: from 12 determinations with calf thymus DNA the adenine/guanine molar ratio had a standard deviation of 0·011; this corresponds to a standard deviation in guanine+cytosine content of 0·2% guanine+cytosine. PMID:5626094

  18. Determination of the base composition of deoxyribonucleic acid by measurement of the adenine-granine ratio.

    Science.gov (United States)

    Kirk, J T

    1967-11-01

    A method is described for determination of the base composition (as guanine+cytosine or adenine+thymine content) of DNA by accurate measurement of the adenine/guanine ratio. The DNA is hydrolysed with 0.03n-hydrochloric acid for 40min. to release the purines. The hydrolysate is subjected to ion-exchange chromatography on Zeo-Karb 225. Apurinic acids are eluted with 0.03n-hydrochloric acid and then guanine and adenine are eluted separately with 2n-hydrochloric acid. Guanine and adenine are each collected as a single fraction, and the amount of base in each case is determined by measuring the volume and the extinction at suitable wavelengths. For use in the calculations, millimolar extinction coefficients in 2n-hydrochloric acid of 12.09 for adenine at 262mmu, and 10.77 for guanine at 248mmu, were determined with authentic samples of bases. The method gives extremely reproducible results: from 12 determinations with calf thymus DNA the adenine/guanine molar ratio had a standard deviation of 0.011; this corresponds to a standard deviation in guanine+cytosine content of 0.2% guanine+cytosine.

  19. Study of Temperature Effect on the Corrosion Inhibition of C38 Carbon Steel Using Amino-tris(Methylenephosphonic Acid in Hydrochloric Acid Solution

    Directory of Open Access Journals (Sweden)

    Najoua Labjar

    2011-01-01

    Full Text Available Tafel polarization method was used to assess the corrosion inhibitive and adsorption behaviours of amino-tris(methylenephosphonic acid (ATMP for C38 carbon steel in 1 M HCl solution in the temperature range from 30 to 60∘C. It was shown that the corrosion inhibition efficiency was found to increase with increase in ATMP concentration but decreased with temperature, which is suggestive of physical adsorption mechanism. The adsorption of the ATMP onto the C38 steel surface was found to follow Langmuir adsorption isotherm model. The corrosion inhibition mechanism was further corroborated by the values of kinetic and thermodynamic parameters obtained from the experimental data.

  20. Alteration of the phospho- or neutral lipid content and fatty acid composition in Listeria monocytogenes due to acid adaptation mechanisms for hydrochloric, acetic and lactic acids at pH 5.5 or benzoic acid at neutral pH.

    Science.gov (United States)

    Mastronicolis, Sofia K; Berberi, Anita; Diakogiannis, Ioannis; Petrova, Evanthia; Kiaki, Irene; Baltzi, Triantafillia; Xenikakis, Polydoros

    2010-10-01

    This study provides a first approach to observe the effects on Listeria monocytogenes of cellular exposure to acid stress at low or neutral pH, notably how phospho- or neutral lipids are involved in this mechanism, besides the fatty acid profile alteration. A thorough investigation of the composition of polar and neutral lipids from L. monocytogenes grown at pH 5.5 in presence of hydrochloric, acetic and lactic acids, or at neutral pH 7.3 in presence of benzoic acid, is described relative to cells grown in acid-free medium. The results showed that only low pH values enhance the antimicrobial activity of an acid. We suggest that, irrespective of pH, the acid adaptation response will lead to a similar alteration in fatty acid composition [decreasing the ratio of branched chain/saturated straight fatty acids of total lipids], mainly originating from the neutral lipid class of adapted cultures. Acid adaptation in L. monocytogenes was correlated with a decrease in total lipid phosphorus and, with the exception of cells adapted to benzoic acid, this change in the amount of phosphorus reflected a higher content of the neutral lipid class. Upon acetic or benzoic acid stress the lipid phosphorus proportion was analysed in the main phospholipids present: cardiolipin, phosphatidylglycerol, phosphoaminolipid and phosphatidylinositol. Interestingly only benzoic acid had a dramatic effect on the relative quantities of these four phospholipids.

  1. Comparative study on solubilities of bismuth, bismuth oxide,and bismuth sulfide in hydrochloric acid-thiourea%铋、氧化铋、硫化铋在盐酸-硫脲中溶解性的比较研究

    Institute of Scientific and Technical Information of China (English)

    马哈亚·艾斯江; 巴哈尔古丽·别克吐尔逊

    2012-01-01

    在盐酸介质中及55℃加热条件下,铋与硫脲形成黄色络合物,从而建立了用分光光度法比较铋、氧化铋、硫化铋在盐酸-硫脲中溶解性的新方法.研究了反应介质、试剂浓度、加热时间、加热温度、震荡速率等因素的影响.在最佳实验条件下,溶液的质量浓度为0.04~0.24 mg/mL时符合比尔定律.相关系数R=0.999 9,检出限为1.05×10-2 μg/mL,标准偏差SD=0.003 5,相对标准偏差RSD=2.42%,摩尔吸收系数为1.515×105 L/(mol·cm),加标回收率为96.7%~98.8%.实验结果表明,铋、氧化铋、硫化铋的溶解性顺序大小为:铋>氧化铋>硫化铋.%A yellow complex is formed from bismuth and thiourea in hydrochloric acid under the heated condition of 55 °C. Thus a new method is set up to compare the solubilities of bismuth, bismuth oxide, and bismuth sulfide in hydrochloric acid-thiourea by using spectrophotometry.Effects of factors, such as reaction medium, reagent concentration, heating time, heating temperature, and oscillation speed,were studied respectively .Under the optimum experimental conditions, mass concentration of the solution is in line with Beer's law, when it is within the range of 0.04-0.24 mg/mL.The correlation coefficient (R) is 0.999 9.The detection limit is 1.05xl0-2μg/mL.The standard deviation is 0.003 5.The relative standard deviation (RSD) is 2.42%.The molar absorption coefficient is 1.515xl05 L/(mol-cm).The recovery rate of standard addition is at 96.7%~98.8%. Experimental result showed that the solubilities of bismuth,bismuth oxide,and bismuth sulfide in hydrochloric acid-thiourea is in order by size as following: Bi>Bi2O3>Bi2S3.

  2. Characteristics of the Carbon Nanotube Coated with Polyaniline Doped with Hydrochloric Acid and Dodecylbenzene Sulfonic Acid%盐酸与DBSA共掺杂聚苯胺修饰碳纳米管性能的研究

    Institute of Scientific and Technical Information of China (English)

    张爱波; 刘刚; 薛艳丽; 郑亚萍; 赵纯颖

    2011-01-01

    The MWNTs/polyaniline composites were prepared via in-situ emulsion polymerization using hydrochloric acid and dodecylbenzene sulfonic acid as dopants. The FTIR spectra, TEM and TGA were used to characterize the morphology and performance of the composites. The TEM results show that the surface of MWNTs are coated by polyaniline composites and the thickness of the coating layer is 10~20nm. The solubility is increased in DMF, THF and chloroform. The thermal stability of the composite is highly improved at 520~750℃ and the encapsulation rate is 15.16%. The conductivity of the sample is increased from 10-7S/cm to 10-3S/cm.%采用原位乳液聚合法制备了盐酸与十二烷基苯磺酸(DBSA)共掺杂聚苯胺/MWNTs复合材料.利用FTIR、TEM和TG等对复合材料的形貌和性能进行了表征.TEM结果表明苯胺共聚物包覆于碳纳米管表面,包覆厚度为10~20nm.复合材料在DMF、THF和氯仿中的溶解性大幅度提高,在520~750℃的热稳定性明显提高,包覆率为15.16%,电导率从聚苯胺的10-7A/cm增大到10-3S/cm.

  3. 氯化法回收废钯-氧化铝催化剂中的钯%Recovery of Palladium from Spent Pd-Al2O3 Catalyst by Hydrochloric Acid Leaching

    Institute of Scientific and Technical Information of China (English)

    李骞; 胡龙; 饶雪飞; 悟永斌; 徐斌; 姜涛

    2015-01-01

    惣悦化铝为载体的某含钯废催化剂为原料,采用恿酸介质中添加悦化助浸剂的方案对钯恒择性浸出,并考察了焙烧,还原,浸出过程的适惚工惤条件。结果表明,钯的回收率可惣达到98%惣上。%Palladium was recovered from spent alumina-supported catalyst by the process of selective leaching using hydrochloric acid with an oxidant. The optimized conditions of roasting, reduction, leaching processes were also investigated. The results showed that the palladium recovery ratio was over 98% in the optimum condition.

  4. Acid-base strengths in pyridine

    NARCIS (Netherlands)

    Bos, M.; Dahmen, E.A.M.F.

    1971-01-01

    Although pyridine is a solvent with a low dielectric constant, spectrophotometric determinations show simple dissociation without ion pairs as intermediates for some sulfonphthaleins and polynitrophenols in pyridine. The salts of a number of amines and hydrochloric acid, perchloric acid and picric

  5. Experimental Investigation and Characterization of Fe and Al from Red Mud by Hydrochloric Acid%赤泥酸浸出铁、铝的工艺条件研究及其表征

    Institute of Scientific and Technical Information of China (English)

    吴烈善; 苏翠翠; 吕宏虹; 曾冬梅; 莫小荣

    2014-01-01

    The systematic study of leaching red mud with hydrochloric acid is carried out .The microstructure and phase transformation of red mud is analyzed by means of SEM and XRD .The experiment results show that the leaching ratios of Fe and Al are 82% and 30 .5% respectively under the condition that reaction temperature 80℃ ,liquid to solid ratio 6 ,hy-drochloric acid concentration 7mol/L and reaction time 3h .Microstructure of red mud is transformed from granular into layer frame shape after been leached by HCl .The hematite in red mud has been totally leached by HCl .%对广西某铝厂的赤泥进行了盐酸浸出铁、铝的工艺条件研究,并利用扫描电镜和X-衍射对赤泥酸溶前后的形貌特征及矿物物像、化学成分进行分析表征,研究结果表明,赤泥在温度为80℃、液固比为6、浓度为7 mol/L的盐酸中反应3 h ,Fe和Al的浸出率分别为82%和30.5%;酸溶前后赤泥形貌由团粒状转变为层架状,赤泥中赤铁矿矿物相被盐酸充分溶出。

  6. The Effects of Various Acid Catalyst on the Esterification of Jatropha Curcas Oil based Trimethylolpropane Ester as Biolubricant Base Stock

    OpenAIRE

    Noor Hafizah Arbain; Jumat Salimon

    2011-01-01

    Biolubricant production of trimethylolpropane ester (ET) was conducted via esterification of fatty acid (FA) of Jatropha curcas oil with trimethylolpropane (TMP). The condition for this reaction was as follows: temperature was 150 °C, time of reaction was 3 hours, molar ratio of FA: TMP was 4:1 and 2% wt/wt concentrated catalyst (based on weight of FA). Different catalyst was used in this reaction such as perchloric acid, sulfuric acid, p-toluenesulfonic acid, hydrochloric acid and nitric aci...

  7. Analytical correlation between varying corrosion parameters and corrosion rate of Al-4.5Cu/10%ZrSiO{sub 4} composite in hydrochloric acid by rare earth chloride

    Energy Technology Data Exchange (ETDEWEB)

    Oloche, O.B.; Yaro, S.A. [Department of Metallurgical Engineering Ahmadu Bello University, Zaria (Nigeria); Okafor, E.G. [Department of Metallurgical Engineering Ahmadu Bello University, Zaria (Nigeria)], E-mail: ekeneokafor@yahoo.com

    2009-03-20

    The effect of varying temperature, time and inhibitor concentration on the corrosion rate of Al-4.5Cu/ZrSiO{sub 4} composite in 0.5 M hydrochloric acid without and with lanthanide chloride salt have been investigated. 10%ZrSiO{sub 4} was used for the production of the Al-4.5Cu/zircon sand composite. The time, temperature and concentration of inhibitor were varied in the range of 6-10 h at 2 h interval, 30-75 deg. C at 15 deg. C interval and 250-1000 ppm at 250 ppm interval respectively. Factorial design, standard deviation, effect of variables at 95% confidence interval and Arrhenius kinetics approach were used to correlate the corrosion parameter and corrosion rate. Results show that increase in temperature, inhibitor concentration above 250 ppm and decrease in time enhance corrosion rate. Also, temperature and anti-corrosion agent concentration are the most important control parameters. The kinetic and statistical approaches were in good agreement.

  8. Synthesis and characterization of a novel eco-friendly corrosion inhibition for mild steel in 1 M hydrochloric acid

    Science.gov (United States)

    Al-Amiery, Ahmed A.; Binti Kassim, Fatin A.; Kadhum, Abdul Amir H.; Mohamad, Abu Bakar

    2016-01-01

    The acid corrosion inhibition process of mild steel in 1 M HCl by azelaic acid dihydrazide has been investigated using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, open circuit potential (OCP) and electrochemical frequency modulation (EFM). Azelaic acid dihydrazide was synthesized, and its chemical structure was elucidated and confirmed using spectroscopic techniques (infrared, nuclear magnetic resonance and mass spectroscopy). Potentiodynamic polarization studies indicate that azelaic acid dihydrazide is a mixed-type inhibitor. The inhibition efficiency increases with increased inhibitor concentration and reaches its maximum of 93% at 5 × 10−3 M. The adsorption of the inhibitor on a mild steel surface obeys Langmuir’s adsorption isotherm. The effect of temperature on corrosion behavior in the presence of 5 × 10−3 M inhibitor was studied in the temperature range of 30–60 °C. The results indicated that inhibition efficiencies were enhanced with an increase in concentration of inhibitor and decreased with a rise in temperature. To inspect the surface morphology of inhibitor film on the mild steel surface, scanning electron microscopy (SEM) was used before and after immersion in 1.0 M HCl. PMID:26795066

  9. Synthesis and characterization of a novel eco-friendly corrosion inhibition for mild steel in 1 M hydrochloric acid

    Science.gov (United States)

    Al-Amiery, Ahmed A.; Binti Kassim, Fatin A.; Kadhum, Abdul Amir H.; Mohamad, Abu Bakar

    2016-01-01

    The acid corrosion inhibition process of mild steel in 1 M HCl by azelaic acid dihydrazide has been investigated using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, open circuit potential (OCP) and electrochemical frequency modulation (EFM). Azelaic acid dihydrazide was synthesized, and its chemical structure was elucidated and confirmed using spectroscopic techniques (infrared, nuclear magnetic resonance and mass spectroscopy). Potentiodynamic polarization studies indicate that azelaic acid dihydrazide is a mixed-type inhibitor. The inhibition efficiency increases with increased inhibitor concentration and reaches its maximum of 93% at 5 × 10-3 M. The adsorption of the inhibitor on a mild steel surface obeys Langmuir’s adsorption isotherm. The effect of temperature on corrosion behavior in the presence of 5 × 10-3 M inhibitor was studied in the temperature range of 30-60 °C. The results indicated that inhibition efficiencies were enhanced with an increase in concentration of inhibitor and decreased with a rise in temperature. To inspect the surface morphology of inhibitor film on the mild steel surface, scanning electron microscopy (SEM) was used before and after immersion in 1.0 M HCl.

  10. The Formation of Mathematical Model for CaCl2 Derived from The Reaction of Ulexite and Hydrochloric Acid by Using Full Factorial Desing Method

    OpenAIRE

    DURAK, Halil; GENEL, Yasar; BASHIROV, Novruz; KERIMOV, Genber

    2011-01-01

    One of the significant boron compounds which are common substance in nature is ulexite. Ulexite is a sodium calcium boron hydrate, its chemical formula is Na2O2CaO5B2O316H2O , and it is thick with in Turkey. Lots of products are derived from boron minerals. One of them is boric acid. CaCl2 is used in many fields and this compound can be obtained by different processes. The aim of this study is producing CaCl2 by forming mathematical model for CaCl2 composing in the wake of the interaction of ...

  11. The Formation of Mathematical Model for CaCl2 Derived from The Reaction of Ulexite and Hydrochloric Acid by Using Full Factorial Desing Method

    OpenAIRE

    DURAK, Halil; GENEL, Yasar; BASHIROV, Novruz; KERIMOV, Genber

    2013-01-01

    One of the significant boron compounds which are common substance in nature is ulexite. Ulexite is a sodium calcium boron hydrate, its chemical formula is Na2O2CaO5B2O316H2O , and it is thick with in Turkey. Lots of products are derived from boron minerals. One of them is boric acid. CaCl2 is used in many fields and this compound can be obtained by different processes. The aim of this study is producing CaCl2 by forming mathematical model for CaCl2 composing in the wake of the interaction of ...

  12. Application of Stabilized Silver Nanoparticles as Thin Films as Corrosion Inhibitors for Carbon Steel Alloy in 1 M Hydrochloric Acid

    Directory of Open Access Journals (Sweden)

    Ayman M. Atta

    2013-01-01

    Full Text Available Nanometer scaled materials have attracted tremendous interest as corrosion protective films due to their high ability to form self-assembled films on the metal surfaces. It is well known that the silver nanoparticles have higher reactivity towards aqueous acidic solution. The present work aims to prepare coated silver nanoparticles to protect carbon steel alloys from aqueous acidic corrosive media. In this respect, Ag nanoparticles colloid solutions were produced through reducing AgNO3 separately with trisodium citrate in an aqueous solution or in the presence of stabilizer such as poly(ethylene glycol thiol and poly(vinyl pyrrolidone. The morphology of the modified silver nanoparticles was investigated by TEM and DLS. UV-Vis absorption spectrum was used to study the effect of HCl on the stability of the dispersed silver nanoparticles. The corrosion inhibition efficiency of the poly (ethylene glycolthiol, the self-assembled monolayers of Ag nanoparticles, was determined by polarization method and electrochemical impedance spectroscopy (EIS. Polarization curves indicated that the coated silver poly (ethylene glycolthiol acted as a mixed type inhibitor. The data of inhibition efficiencies obtained measured by polarization measurements are in good agreement with those obtained with electrochemical impedance.

  13. Electrochemical, quantum chemical and SEM investigation of the inhibiting effect and mechanism of ciprofloxacin, norfloxacin and ofloxacin on the corrosion for mild steel in hydrochloric acid

    Institute of Scientific and Technical Information of China (English)

    PANG XueHui; GUO Wenduan; LI WeiHua; XIE dianDong; HOU BaoRong

    2008-01-01

    The inhibiting effect and mechanism of 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinoline carboxylicacid(ciprofloxacin), 1-ethyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinoline carboxylic acid (norfloxacin) and (-)-(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7oxo-7 H-pyrido(1,2,3-de)-1,4-benzoxazine-6 carboxylic acid (ofloxacin) on the corrosion of mild steel in 1 mol/L HCl have been studied using electrochemical method, quantum chemical method and SEM at 303 K. The potentiodynamic results showed that these compounds suppressed both cathodic and anodic processes of mild steel corrosion in 1 mol/L HCl. The impedance spectroscopy showed that Rp values increased, and Cdl values decreased with the rising of the working concentration. Quantum chemical calculation showed that there was a positive correlation between some inhibitors structure properties and the inhibitory efficiency. The inhibitors function through adsorption followed Langmuir isotherm, and chemisorption made more contribution to the adsorption of the inhibitors on the steel surface compared with physical adsorption. SEM analysis suggested that the metal had been protected from aggressive corrosion because of the addition of the inhibitors.

  14. Electrochemical, quantum chemical and SEM investigation of the inhibiting effect and mechanism of ciprofloxacin, norfloxacin and ofloxacin on the corrosion for mild steel in hydrochloric acid

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The inhibiting effect and mechanism of 1-cyclopropyl-6-fluoro-1,4-dihydro -4-oxo-7-(1-piperazinyl) -3- quinoline carboxylicacid(ciprofloxacin), 1-ethyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinoline carboxylic acid (norfloxacin) and (?)-(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7- oxo-7 H-pyrido(1,2,3-de)-1,4- benzoxazine-6 carboxylic acid (ofloxacin) on the corrosion of mild steel in 1 mol/L HCl have been studied using electrochemical method, quantum chemical method and SEM at 303 K. The potentiodynamic results showed that these compounds suppressed both cathodic and an-odic processes of mild steel corrosion in 1 mol/L HCl. The impedance spectroscopy showed that Rp values increased, and Cdl values decreased with the rising of the working concentration. Quantum chemical calculation showed that there was a positive correlation between some inhibitors structure properties and the inhibitory efficiency. The inhibitors function through adsorption followed Langmuir isotherm, and chemisorption made more contribution to the adsorption of the inhibitors on the steel surface compared with physical adsorption. SEM analysis suggested that the metal had been protected from aggressive corrosion because of the addition of the inhibitors.

  15. The water soluble composite poly(vinylpyrrolidone–methylaniline: A new class of corrosion inhibitors of mild steel in hydrochloric acid media

    Directory of Open Access Journals (Sweden)

    R. Karthikaiselvi

    2017-02-01

    Full Text Available In recent years poly methyl aniline has been reported as one of the efficient corrosion inhibitors of mild steel in acidic media. In view of the major limitation of the insolubility of polymethyl aniline PMA, we propose to convert PMA into a water soluble composite using supporting polymer polyvinylpyrrolidone to get higher solubility and corrosion inhibition efficiency. The water soluble composite poly(vinylpyrrolidone-methyl aniline was synthesized by chemical oxidative polymerization and its inhibitive effect on mild steel in 1 M HCl has been investigated using weight loss and electrochemical techniques (potentiodynamic polarization studies and impedance spectroscopy. SEM and EDX analyses are carried out to establish a protective film formation on the metal surface.

  16. Inhibition Effects of a Synthesized Novel 4-Aminoantipyrine Derivative on the Corrosion of Mild Steel in Hydrochloric Acid Solution together with Quantum Chemical Studies

    Directory of Open Access Journals (Sweden)

    Abu Bakar Mohamad

    2013-06-01

    Full Text Available 1,5-Dimethyl-4-((2-methylbenzylideneamino-2-phenyl-1H-pyrazol-3(2H-one (DMPO was synthesized to be evaluated as a corrosion inhibitor. The corrosion inhibitory effects of DMPO on mild steel in 1.0 M HCl were investigated using electrochemical impedance spectroscopy (EIS, potentiodynamic polarization, open circuit potential (OCP and electrochemical frequency modulation (EFM. The results showed that DMPO inhibited mild steel corrosion in acid solution and indicated that the inhibition efficiency increased with increasing inhibitor concentration. Changes in the impedance parameters suggested an adsorption of DMPO onto the mild steel surface, leading to the formation of protective films. The novel synthesized corrosion inhibitor was characterized using UV-Vis, FT-IR and NMR spectral analyses. Electronic properties such as highest occupied molecular orbital energy, lowest unoccupied molecular orbital energy (EHOMO and ELUMO, respectively and dipole moment (μ were calculated and discussed. The results showed that the corrosion inhibition efficiency increased with an increase in the EHOMO values but with a decrease in the ELUMO value.

  17. A Comparative Study of the Inhibitory Effect of Gum Exudates from Khaya senegalensis and Albizia ferruginea on the Corrosion of Mild Steel in Hydrochloric Acid Medium

    Directory of Open Access Journals (Sweden)

    Paul Ocheje Ameh

    2015-01-01

    Full Text Available A comparative study of the inhibitory potentials of gum exudates from Albizia ferruginea (AF and Khaya senegalensis (KS on the corrosion of mild steel in HCl medium was investigated using weight loss and gasometric method. The active chemical constituents of the gum were elucidated using GC-MS while FTIR was used to identify the bonds/functional groups in the gums. The two gum exudates were found to be good corrosion inhibitors for mild steel in acidic medium. On comparison, maximum inhibition efficiency was found in Khaya senegalensis with 82.56% inhibition efficiency at 0.5% g/L concentration of the gum. This may be due to the fact that more compounds with heteroatoms were identified in the GCMS spectrum of KS gum compared to the AF gum. The presence of such compounds may have enhanced their adsorption on the metal surface and thereby blocking the surface and protecting the metal from corrosion. The adsorption of the inhibitors was found to be exothermic and spontaneous and fitted the Langmuir adsorption model.

  18. Inhibition effects of a synthesized novel 4-aminoantipyrine derivative on the corrosion of mild steel in hydrochloric acid solution together with quantum chemical studies.

    Science.gov (United States)

    Junaedi, Sutiana; Al-Amiery, Ahmed A; Kadihum, Abdulhadi; Kadhum, Abdul Amir H; Mohamad, Abu Bakar

    2013-06-04

    1,5-Dimethyl-4-((2-methylbenzylidene)amino)-2-phenyl-1H-pyrazol-3(2H)-one (DMPO) was synthesized to be evaluated as a corrosion inhibitor. The corrosion inhibitory effects of DMPO on mild steel in 1.0 M HCl were investigated using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, open circuit potential (OCP) and electrochemical frequency modulation (EFM). The results showed that DMPO inhibited mild steel corrosion in acid solution and indicated that the inhibition efficiency increased with increasing inhibitor concentration. Changes in the impedance parameters suggested an adsorption of DMPO onto the mild steel surface, leading to the formation of protective films. The novel synthesized corrosion inhibitor was characterized using UV-Vis, FT-IR and NMR spectral analyses. Electronic properties such as highest occupied molecular orbital energy, lowest unoccupied molecular orbital energy (EHOMO and ELUMO, respectively) and dipole moment (μ) were calculated and discussed. The results showed that the corrosion inhibition efficiency increased with an increase in the EHOMO values but with a decrease in the ELUMO value.

  19. Effects from pretreatment of stannous fluoride versus sodium fluoride on enamel exposed to 0.1 M or 0.01 M hydrochloric acid.

    Science.gov (United States)

    Willumsen, Tiril; Ogaard, Bjørn; Hansen, Bjørn Frode; Rølla, Gunnar

    2004-10-01

    Preventing enamel erosions caused by acidic soft drinks or from vomiting during eating disorders is a challenge in current dental research. The aim of this study was to examine whether pretreatment of dental enamel with a solution of 0.4% SnF2 could prevent dissolution of human enamel exposed to solutions of 0.1 M HCl, pH 1.2 or 0.01 M HCl at pH 2.2. Human enamel was pretreated for 18 h with a solution of 0.4% SnF2 and with control solutions of 2% NaF or distilled water, and then exposed to HCl solutions. Similar experiments were performed with teeth treated for 2 min SnF2 and then 4 min HCl. The effect was monitored by scanning electron microscopy (SEM) and by chemical analysis. At pH 2.2, NaF and water treatments showed minor inhibition of enamel dissolution, whereas SnF2 inhibited demineralization significantly also after 2 min pretreatment and 4 min HCl exposure. At pH 1.2, SEM showed severe dissolution of the enamel surfaces regardless of pretreatment. As pH of stomach vomit is usually > 1.5, SnF2 may be an interesting agent for use in the treatment and prevention of dental erosions even in patients with frequent vomiting episodes.

  20. Synergistic inhibition effect of L-phenylalanine and rare earth Ce(IV) ion on the corrosion of copper in hydrochloric acid solution

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Daquan, E-mail: zhangdaquan@shiep.edu.cn [Department of Environmental Engineering, Shanghai University of Electric Power, Shanghai 200090 (China); Wu Huan; Gao Lixin [Department of Environmental Engineering, Shanghai University of Electric Power, Shanghai 200090 (China)

    2012-04-16

    Highlights: Black-Right-Pointing-Pointer Synergistic effect of L-phenylalanine (L-Phe) and Ce(SO{sub 4}){sub 2} on the corrosion of copper on the corrosion inhibition of copper in 0.5 M HCl solution. Black-Right-Pointing-Pointer Structure of the complex film formed by the interaction of L-phenylalanine (L-Phe) and Ce(SO{sub 4}){sub 2} on the copper surface. Black-Right-Pointing-Pointer Mechanism of the improvement of the inhibition property of amino acids by the addition of rare earth compound. - Abstract: The synergistic inhibition effect of L-phenylalanine (L-Phe) and Ce(SO{sub 4}){sub 2} on the corrosion of copper in 0.5 M HCl solution was investigated by weight-loss, electrochemical methods and surface analysis. The electrochemical results showed that L-Phe has definite inhibition effects for copper, while Ce(IV) promoted the anodic process of copper corrosion. The combination L-Phe with Ce(IV) ion produced strong synergistic effect on corrosion inhibition for copper. The maximum inhibition efficiency was 82.7% for 5 mM L-Phe + 2 mM Ce(IV). The results of EIS and potentiodynamic polarization are in good agreement. SEM showed that L-Phe and Ce(IV) can form a dense protective film on the copper surface.

  1. Response Surface Methodology for Optimization of Extraction Process for Soluble Dietary Fiber from Grape Pomace with Hydrochloric Acid%响应面法优化葡萄皮渣中可溶性膳食纤维的酸法提取工艺

    Institute of Scientific and Technical Information of China (English)

    杜彬; 李凤英; 范长军; 朱凤妹

    2011-01-01

    目的:利用响应面法对葡萄皮渣中可溶性膳食纤维的酸法提取工艺进行优化。方法:在单因素试验基础上选取试验因素与水平,根据Box-Behnken试验设计原理采用四因素三水平的响应面分析法,依据回归分析确定各工艺条件的影响因素,以可溶性膳食纤维得率为响应值作响应面和等高线图。结果:在分析各个因素的显著性和交互作用后,得出葡萄皮渣可溶性膳食纤维提取的最佳工艺为盐酸的浓度0.40mol/L、提取温度75℃、提取时间90min、料液比1:12(g/mL),在此工艺条件下可溶性膳食纤维得率为47.56mg/g。结论:响应面回归方程与实验结果拟合性好,此模型合理可靠,可用于实际预测。%Objective: To optimize the extraction of soluble dietary fiber(SDF) from grape pomace with hydrochloric acid.Methods: One-factor-at-a-time experiments,mathematical modeling based on Box-Behnken experimental design and multiple regression analysis and response surface analysis were carried out to investigate the individual and interactive effects of various process conditions on extraction yield of SDF and their significance.Response surface and contour plots were drawn with extraction yield of SDF as a function.Results: The optimal conditions for SDF extraction were 0.40 mol/L hydrochloric acid as extraction solvent at a material-to-liquid ratio of 1:12(g/mL) and 75 ℃ for an extraction duration of 90 min.Under the optimal extraction conditions,the yield of SDF was up to 47.56 mg/g,which was close to the model-predicted value.Conclusion: The developed regression equation can be well fitted with experimental results and is reasonable,reliable and applicable for actual prediction.

  2. Newly synthesized salicylidene-4,4′-dimorpholine (SDM) assembled on nickel oxide nanoparticles (NiONPs) and its inhibitive effect on mild steel in 2 N hydrochloric acid

    Energy Technology Data Exchange (ETDEWEB)

    Wadhwani, Poonam M. [Department of Chemistry, School of Sciences, Gujarat University, Ahmedabad 380009, Gujarat (India); Panchal, Vikram K., E-mail: vikram60panchal@gmail.com [R.G. Shah Science College, Vasna, Ahmedabad 382170, Gujarat (India); Shah, Nisha K. [Department of Chemistry, School of Sciences, Gujarat University, Ahmedabad 380009, Gujarat (India)

    2015-03-15

    Graphical abstract: - Highlights: • Nanoparticles with inhibitor were found to be better corrosion inhibitor than only organic compound. • A strong binding mechanism was confirmed by FTIR, PXRD. • Inhibition efficiency increases drastically for SDM assembled on NiONPs as compared to SDM. • The adsorption model obeys Langmuir adsorption isotherm. • The protective layer over the surface of mild steel has been confirmed by AFM analysis. - Abstract: Corrosion inhibition of mild steel in hydrochloric acid solution by salicylidene-4,4′-dimorpholine (SDM) and SDM assembled on nickel oxide nanoparticles (NiONPs) has been studied with gravimetric, electrochemical impedance spectroscopy (EIS) and polarization techniques. Inhibition was found to increase with increasing concentration of the inhibitors. While studying the temperature effect on corrosion behaviour of SDM and SDM assembled on NiONPs, the inhibition efficiency decreases for SDM only but increases for SDM assembled on NiONPs. The adsorption of both the inhibitors on the mild steel surface obeys the Langmuir adsorption isotherm. The activation energy as well as other thermodynamic parameters (ΔH* and ΔS*) for the inhibition process was calculated. EIS analysis results showed that the capacitive loops for SDM assembled on NiONPs were far away from blank when compared with SDM only. Polarization curve shows that the inhibitors are of mixed type. Further, the protective layer formation was confirmed from atomic force microscopy (AFM) results. Various methods such as EIS-MS, {sup 1}H NMR, XRD, FTIR, and DLS were performed for the confirmation of the structure, interaction of SDM with NiONPs and size of NiONPs.

  3. ac impedance, X-ray photoelectron spectroscopy and density functional theory studies of 3,5-bis(n-pyridyl)-1,2,4-oxadiazoles as efficient corrosion inhibitors for carbon steel surface in hydrochloric acid solution

    Energy Technology Data Exchange (ETDEWEB)

    Outirite, Moha; Lagrenee, Michel; Lebrini, Mounim [Unite de Catalyse et de Chimie du Solide, UMR-CNRS 8181, ENSCL, B.P. 90108, F-59652 Villeneuve d' Ascq Cedex (France); Traisnel, Michel; Jama, Charafeddine [Laboratoire des Procedes d' Elaboration des Revetements Fonctionnels, PERF UMR-CNRS 8008, ENSCL, B.P. 90108, F-59652 Villeneuve d' Ascq Cedex (France); Vezin, Herve [Laboratoire de Chimie Organique et Macromoleculaire, UMR-CNRS 8009, USTL Bat C4, F-59655 Villeneuve d' Ascq Cedex (France); Bentiss, Fouad, E-mail: fbentiss@enscl.f [Laboratoire de Chimie de Coordination et d' Analytique, Faculte des Sciences, Universite Chouaib Doukkali, B.P. 20, M-24000 El Jadida (Morocco)

    2010-02-01

    The corrosion inhibition properties of a new class of oxadiazole derivatives, namely 3,5-bis(n-pyridyl)-1,2,4-oxadiazoles (n-DPOX) for C38 carbon steel corrosion in 1 M HCl medium were analysed by electrochemical impedance spectroscopy (EIS). An adequate structural model of the interface was used and the values of the corresponding parameters were calculated and discussed. The experimental results showed that these compounds are excellent inhibitors for the C38 steel corrosion in acid solution and that the protection efficiency increased with increasing the inhibitors concentration. Electrochemical impedance data demonstrate that the addition of the n-DPOX derivatives in the corrosive solution decreases the charge capacitance and simultaneously increases the function of the charge/discharge of the interface, facilitating the formation of an adsorbed layer over the steel surface. Adsorption of these inhibitors on the steel surface obeys to the Langmuir adsorption isotherm. X-ray photoelectron spectroscopy (XPS) and the thermodynamic data of adsorption showed that inhibition of steel corrosion in normal hydrochloric solution by n-DPOX is due to the formation of a chemisorbed film on the steel surface. Quantum chemical calculations using the Density Functional Theory (DFT) and the Quantitative Structure Activity Relationship (QSAR) approach were performed on n-DPOX derivatives to determine the relationship between molecular structure and their inhibition efficiencies. The results of the quantum chemical calculations and experimental inhibition efficiency were subjected to correlation analysis and indicate that their inhibition effect is closely related to E{sub HOMO}, E{sub LUMO}, and dipole moment (mu).

  4. Acid-Base Homeostasis.

    Science.gov (United States)

    Hamm, L Lee; Nakhoul, Nazih; Hering-Smith, Kathleen S

    2015-12-07

    Acid-base homeostasis and pH regulation are critical for both normal physiology and cell metabolism and function. The importance of this regulation is evidenced by a variety of physiologic derangements that occur when plasma pH is either high or low. The kidneys have the predominant role in regulating the systemic bicarbonate concentration and hence, the metabolic component of acid-base balance. This function of the kidneys has two components: reabsorption of virtually all of the filtered HCO3(-) and production of new bicarbonate to replace that consumed by normal or pathologic acids. This production or generation of new HCO3(-) is done by net acid excretion. Under normal conditions, approximately one-third to one-half of net acid excretion by the kidneys is in the form of titratable acid. The other one-half to two-thirds is the excretion of ammonium. The capacity to excrete ammonium under conditions of acid loads is quantitatively much greater than the capacity to increase titratable acid. Multiple, often redundant pathways and processes exist to regulate these renal functions. Derangements in acid-base homeostasis, however, are common in clinical medicine and can often be related to the systems involved in acid-base transport in the kidneys.

  5. Electrochemical and quantum chemical calculations on 4,4-dimethyloxazolidine-2-thione as inhibitor for mild steel corrosion in hydrochloric acid

    Science.gov (United States)

    Musa, Ahmed Y.; Kadhum, Abdul Amir H.; Mohamad, Abu Bakar; Rahoma, Abdalhamid Ahmad B.; Mesmari, Hussein

    2010-04-01

    The inhibition ability of 4,4-dimethyloxazolidine-2-thione (DMT) for mild steel corrosion in a 1 M HCl solution at 30 °C was studied by means of potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) technique, and scanning electron microscopy (SEM). Quantum chemical calculation based on PM3 method was performed on DMT. The molecule structural parameters, such as the frontier molecular orbital energy HOMO (highest occupied molecular orbital) and LUMO (lowest unoccupied molecular orbital), the charge distribution and the fraction of electrons (Δ N) transfer from inhibitor to mild steel were calculated and discussed. Results showed that DMT performed as good inhibiting effect for the corrosion of mild steel in a 1 M HCl solution and inhibition efficiency is higher than 82% at 4 × 10 -3 M DMT. Results indicate that the inhibition efficiencies increased with the concentration of DMT and the area containing S atom is most possible site for bonding the mild steel surface by donating electrons to the metal. Adsorption of the inhibitor on the mild steel surface followed Langmuir adsorption isotherm and the value of the free energy of adsorption Δ G○ads indicated that the adsorption of DMT molecule was a spontaneous process and was typical of chemisorptions.

  6. 桑叶提取物中槲皮素和山萘酚的含量测定%Determination of quercetin and kaempferol in folium mori extract after hydrolysis by hydrochloric acid

    Institute of Scientific and Technical Information of China (English)

    蒋立娣; 宣贵达; 吴好好; 李丽萍

    2009-01-01

    To establish an method to determine the contents of quercetin and kaempferol in folium mori extract by HPLC,the flavones in folium mori extract were hydrolyted into quercetin and kaempferol with the mixed solution of methanol-hydrochloric acid.The contents of quercetin and kaempferol were determined by HPLC method,performed on Diamonsil C_u column with the mobile phase consisted of methanol -0.20% phosphoric acid solution (63·37).The flow rate was 1.0 mL·min~(-1),the UV wavelength was set at 370 nm.The linear ranges of quercetin and kaempferol were 0.84-26.8 μg·mL~(-1),0.44-14.2 μg · mL~(-1),respectively.The average recoveries of quercetin and kaempferol were 101.3%,99.5%.The method was accurate,reliable and with good reappearance for the determination of quercetin and kaempferol in folium mori extract.%建立HPLC法测定桑叶提取物中水解槲皮素和山萘酚的含量.先用甲醇-盐酸混合液(甲醇终浓度50%,盐酸终浓度2.0 mol·L~(-1))水解桑叶提取物中的黄酮类成分成槲皮素和山萘酚,以HPLC法测定槲皮素和山萘酚含量.色谱柱为Diamonsil钻石C18柱,流动相为甲醇-0.2%磷酸(63∶37,体积分数),流速为1.0 mL·min~(-1),检测波长为370 nm.结果表明槲皮素在0.84~26.8 mg·L~(-1)之间,山萘酚在0.44~14.2 mg·L~(-1)之间呈良好的线性关系,平均回收率分别为101.3%和99.5%.该测定方法准确、重复性好,可用于桑叶提取物中槲皮素和山萘酚的含量测定.

  7. 响应面法优化红薯渣果胶的提取条件%Optimization of hydrochloric acid-mediated extraction of pectin from yam pulpusing response surface methodology

    Institute of Scientific and Technical Information of China (English)

    张允; 王响; 陈劲春

    2012-01-01

    This study examined variables that influence the hydrochloric acid-extraction of pectins from yam pulp. An initial screening study tested the main parameters influencing yield and uronic acid content by one-factor-at-a-time experimental design. The solid-to-liquid ratio was determined to be 1:16. The studies of the relationship between the GalA yield and the three variables including extraction pH, temperature and the length of extraction time used response surface methodology using a Box-Behnken design. A mathematical model representing the relationship was constructed using quadratic regression orthogonal rotation combination design, and the effects of pairwise cross-interactions among the above factors on GalA yield were evaluated by response surface analysis. The optimal extraction conditions for the extraction of pectin from yam pulp were determined to be pH 1.5 at 90 % for 90 min. Under these optimal conditions, the yield of pectin reached up to 6.50%. In industry this study provide the basis of the extraction of pectins from yam pulp.%果胶提取以红薯渣为原料,果胶生产常用酸盐酸作为提取用酸,在单因素试验基础上,确定料液比为1:20,对提取液pH值,提取温度T,提取时间t3个因素采用响应面方法进行了工艺优化研究。经过响应面分析了因素之间的相互影响并建立了3因素与果胶提取率的二次回归模型。结果表明:盐酸提取果胶的最优工艺参数为:温度87℃、pH1.33、时间92min,在此最优提取条件下果胶的提取率为6.24%。这为工业利用红薯渣生产果胶提供了依据。

  8. Leachability of nitrided ilmenite in hydrochloric acid

    CSIR Research Space (South Africa)

    Swanepoel, JJ

    2010-10-01

    Full Text Available Titanium nitride in upgraded nitrided ilmenite (bulk of iron removed) can selectively be chlorinated to produce titanium tetrachloride. Except for iron, most other components present during this low temperature (ca. 200 °C) chlorination reaction...

  9. Research on Application of HPLC in Measuring Concentration of Hydrochloric Acid Palmatine in Rat Serum%高效液相色谱-荧光检测法在大鼠血清中盐酸黄藤素浓度测定中的应用研究

    Institute of Scientific and Technical Information of China (English)

    周小虎

    2015-01-01

    take hydrochloric acid palmatine tablets orally , get blood in the caudal vein and measure the blood concentration.Process the data through 3P97 pharmacokinetics software package , and then calculate the pharmacokinetic parameter in the medicine body.Results Linear regression equation of palmatine is : C =6.1050A ×10-4 +7.3 ×10 -3 (r =0.9997).The serum con-centration of the hydrochloric acid palmatine in the range from 0.04mg/L to 0.4mg/L presents good linear relationship with the peak area . The intraday and daytime precision test RSD of low , medium and high concentration is less than 2%.The stability is good (RSD =1.77%). The hydrochloric acid palmatine shows two -compartment model pharmacokinetics process in the body of the rat .Apply intragastric adminis-tration based on 30mg/kg, and measure the time peak of the blood concentration is (0.30 ±0.04) h.The plasma drug peak concentration is 15.27μg/L, and the elimination rate constant is 0.2031(h-1 ).

  10. Propanoyl(1Z-N-(2,6-dimethylphenyl-2-oxopropanehydrazonoate as inhibitor for corrosion of 6061 Al alloy15 % (v SiC(p composite in hydrochloric acid media

    Directory of Open Access Journals (Sweden)

    Achutha Kini U

    2012-10-01

    Full Text Available ABSTRACT: The corrosion inhibition effect of Propanoyl(1Z-N-(2,6-dimethylphenyl-2-oxopropanehydrazonoate (PDOH in the corrosion of 6061 Aluminium alloy-15%(v SiC(p composite in 0.5 and 1M hydrochloric acid medium at four different temperatures (30, 40, 50 and 60 ⁰C was investigated using potentio-static polarization (Tafel extrapolation and Linear polarization and weight loss methods. The results obtained reveal that PDOH is an efficient corrosion inhibitor with around 96% inhibition efficiency within the range of temperature studied. Leftward and downward shifts in Tafel plots were observed with the addition of the inhibitor, indicating that PDOH inhibits the corrosion process effectively, and that it is a cathodic inhibitor. Corrosion rate increases and inhibition efficiency decreases with increase in temperature. Results obtained by Tafel extrapolation, linear polarization, and weight loss methods are in agreement. The adsorption of the inhibitor onto the surface of the 6061 Al alloy 15 % (v SiC(p composite is found to obey Temkins' adsorption isotherm that verifies the assumption of mono-layer adsorption on a uniform homogeneous composite surface with an interaction in the adsorption layer. The inhibition is therefore governed by the physisorption mechanism.ABSTRAK: Kesan perencatan kakisan Propanoyl(1Z-N-(2,6-dimethylphenyl-2-oxopropanehydrazonoate (PDOH ke atas kakisan komposit aloi Al 6061-15%(v SiC(p dalam media asid hidroklorik 0.5 dan 1M pada suhu-suhu yang berbeza (30, 40, 50 dan 60⁰C telah dikaji menggunakan polarisasi statik-upaya (extrapolarisasi Tafel dan polarisasi Linear dan kaedah kehilangan berat. Keputusan diperolehi menunjukkan PDOH adalah perencat yang efisien dengan 96 % keupayaan perencatan bagi julat suhu yag dikaji. Anjakan ke kiri dan ke bawah plot Tafel dapat dilihat dengan penambahan perencat, menunjukkan PDOH merencatkan proses kakisan dengan berkesan, dan ia adalah perencat katodik. Dengan peningkatan suhu

  11. Corrosion resistance and its mechanism of Ni-Cu-P coating and 316L stainless steel in hot hydrochloric acid solution%Ni-Cu-P镀层和316L不锈钢在热盐酸溶液中的耐蚀性及机制

    Institute of Scientific and Technical Information of China (English)

    薛亚军

    2013-01-01

    Effect of temperature and concentration on the corrosion behavior of Ni-Cu-P coating and 316L stainless steel was studied by mass loss method.The results show that the corrosion resistance of Ni-Cu-P coating is better than that of 316L stainless steel in hot hydrochloric acid solution.The effect of hydrochloric acid concentration on the corrosive rate of 316L stainless steel is greater than that of Ni-Cu-Pcoating.The corrosive rates of 316L stainless steel and Ni-Cu-P coating increase 2.7 and 0.6 times respectively while increasing hydrochloric acid concentration from 5% to 20%.For the Ni-Cu-P coating,the uniform corrosion occurs in the hydrochloric acid solution.However,the selective corrosion mechanism is found for 316L stainless steel,and the higher temperature and concentration of corrosion medium,the more serious selective corrosion.%采用质量损失法研究了温度和浓度对化学镀Ni-Cu-P镀层和316L不锈钢在盐酸溶液中的腐蚀行为.结果表明,在高温盐酸溶液中,Ni-Cu-P镀层的耐蚀性优于316L不锈钢,盐酸浓度对316L不锈钢腐蚀速率的影响大于Ni-Cu-P镀层,盐酸浓度由5%升高到20%,316L不锈钢和Ni-Cu-P镀层的腐蚀速率分别增大了2.7倍和0.6倍;在盐酸溶液中,Ni-Cu-P镀层发生均匀腐蚀,316L不锈钢发生选择性腐蚀,且温度和浓度越高,选择性腐蚀越严重.

  12. Spectrophotometric Determination of Scandium in Hydrochloric Acid Leaching Solution of Red Mud%赤泥盐酸浸出液中钪的分光光度测定

    Institute of Scientific and Technical Information of China (English)

    邓海霞; 王克勤; 王皓; 李爱秀; 张风林; 陈津

    2011-01-01

    考察了温度、时间、显色剂用量、酸度对待测溶液吸光度的影响,结果表明:温度对吸光度值不产生大的影响,在室温下测试即可;溶液显色在前8min内不稳定,其显色时间一定要达到10 min,溶液颜色保持16h不发生太大的变化;显色剂氯代磺酚C和Sc(Ⅲ)1∶1络合稳定,其溶液加入量确定为3ml;酸度对吸光度有较大的影响,待测溶液的pH值为2.0时吸光度值最大,且稳定.溶液最大吸光度波长为649 nm,工作曲线回归方程为y=0.03839x -0.0002,相关系数的平方为0.9993,Sc(Ⅲ)的质量浓度在0~1.2 mg·L-1范围内符合朗伯-比尔定律,表观摩尔吸光系数为7.78×105 L·mol -1·cm-1.本法测定赤泥盐酸浸出液中的钪,结果比较稳定,RSD(n =6)为1.45%~4.16%,加标回收率为98%~ 102%,灵敏度高、结果较满意.%The effects of temperature, time, reagent dosage, solution pH on absorbance showed that: the temperature had little effect on the absorbance, the solution could be tested at room temperature; the determination result was not stable within the first 8 min, the solution should achieve a coloration time for 10 mins, the solution color maintained 16 h did not change much; reagent chlorosulpho-phenol C and Sc( IB) 1:1 complex stability, the solution was added 3 ml; acidity had great influence on the absorbance with pH value of 2.0, the maximum absorbance, and stability. Hie maximum absorbance of solution was at 649 nm, and the standard curve regression equation: y = 0.03839* - 0.0002, the square of correlation coefficient was 0.9993, Lambert-Beer law was obeyed for Sc (JE ) in the range of 0 -1.2 rag-L"' and the apparent molar absorptivity was 7.78 xlO3 L-mol~1>cm~l. The method was applied to the determination of Sc( HI) in hydrochloric acid leaching solution of red mud, the result was stable with high sensitivity and satisfactory, RSD ( n = 6) was 1.45%-4.16% and the recovery of Sc( I) was 98% to 102%.

  13. 盐酸液中钇(Ⅲ)和铕(Ⅲ)的P507溶剂萃取平衡分析%Equilibrium analysis of solvent extraction of yttrium(Ⅲ)and europium(Ⅲ)from hydrochloric acid with P507

    Institute of Scientific and Technical Information of China (English)

    付念新; 隋智通; Mikiya TANAKA

    2011-01-01

    为了精确预测非理想条件下稀土金属溶剂萃取的平衡分配比,研究了溶于Shellsol D70中的P507溶剂对盐酸液中钇(Ⅲ)和铕(Ⅲ)的萃取平衡,建立化学基模型,并通过非线性最小二乘法确定萃取平衡常数.所建模型涉及了在低酸度区的离子交换反应和高酸度区的溶剂化萃取反应;模型还考虑了稀土金属与Cl-的配位反应,并用萃取剂的有效浓度代替[(HR)2],进而分别对水相和有机相(HR2)的非理想性加以修正.对稀土单元体系,在较宽的初始浓度范围内(稀土浓度最高至0.1 mol/L,盐酸浓度0.07-3.00 mol/L,萃取剂浓度0.25-1.00 mol/L),由模型计算的稀土分配比与实验测得的数据吻合良好,验证了模型的有效性.对于稀土二元体系,该模型能以良好的精度对平衡分配比进行工程预测.%For the accurate prediction of equilibrium distribution ratios of rare earth metals during solvent extraction under non-ideal conditions,the extraction equilibria of yttrium(Ⅲ)and europium(Ⅲ)from the hydrochloric acid solutions with P507 in Shellsoi D70 were studied.A chemically-based model was established and the extraction equilibrium constants were determined by the nonlinear least squares method.The proposed model involves the cation exchange reaction and the solvation extraction in the low and high acidity regions,respectively.In the model,the nonideality of the aqueous phase and(HR)2 was corrected by considering the complexation of the metals with(Cl-)and by replacing[(HR)2]with its effective concentration,respectively.This model was verified by fair agreement between the calculated metal distribution ratios and those experimentally obtained in the single metal systems.The feed concentrations for the systems are in wide ranges of the metal(up to 0.1 mol/L),hydrochloric acid(0.07-3.00 mol/L)and the extractant(0.25-1.00 mol/L).The model enables the engineering prediction of the equilibrium distribution ratios with good

  14. Synthesis of N - Alkyl Benzimidazoles as Corrosion Inhibitors for Acidification in Hydrochloric Acid and Evaluation of Their Inhibition Performance%N-烷基苯并咪唑酸化缓蚀剂的合成及性能

    Institute of Scientific and Technical Information of China (English)

    杨鹏辉; 冀生辉

    2013-01-01

    Four kinds of N - alkyl benzimidazole corrosion inhibitors were synthesized by alkylation of 2 - methyl benzimidazole or 2 - ethyl benzimidazole. The corrosion inhibition performance of as - synthesized inhibitors was evaluated by static state weight loss test and dynamic potential scanning polarization curve measurement. It was found that properly extending carbon chain of benzimidazole helped to improve the anticorrosion ability of benzimidazoles, and corrosion inhibitor N - hexadecyl - 2 - ethyl benzimidazole showed the best corrosion inhibition performance. Besides, at 60 ℃ in 15% hydrochloric acid, the corrosion rate of N80 steel decreased with increasing concentration of the corrosion inhibitor; and the corrosion rate of the steel at a corrosion inhibitor concentration of 1.0% was 1.73g/(m2 · h) , which indicated that corrosion inhibitor N-hexadecyl-2-ethyl benzimidazole was advantageous over the first-class corrosion inhibitor for acidification. Moreover, as-synthesized corrosion inhibitors were a class of mixed-type inhibitors dominated by cathode inhibition, but their inhibition performance in HCl with a concentration of above 20 % or at a temperature of above 70 ℃ was undesirable.%苯并咪唑是一类环境友好的缓蚀剂,将其衍生物用作油气田酸化缓蚀剂的报道较少.通过烷基化反应在2-甲基苯并咪唑和2-乙基苯并咪唑的1-氮原子上分别引入十二烷基和十六烷基,合成了4种N-烷基苯并咪唑,并以其为主剂制成缓蚀剂,用静态失重法和动电位扫描极化曲线对4种复配缓蚀剂在盐酸溶液中的缓蚀性能进行了评价.结果表明:适当延长1位烷基碳链,有助于提高苯并咪唑衍生物的缓蚀能力;合成的4种N-烷基苯并咪唑中,以N-十六烷基-2-乙基苯并咪唑为主剂制成缓蚀剂d的缓蚀性能最好;在60℃,15%HCl中,N80钢的腐蚀速率随缓蚀剂d用量的增大而减小,其用量为1.0%时,N80钢腐蚀速率为1.73 g/(m2·h),优于

  15. 盐酸介质中N,N′-二(二苯基膦基)-1-苯乙胺对碳钢的缓蚀性能研究%Investigation on Corrosion Inhibition of N,N′-Bis(diphenylphosphino)-1-phenylethylamine for Carbon Steel in Hydrochloric Acid Solution

    Institute of Scientific and Technical Information of China (English)

    魏健; 谢斌; 赖川; 李玉龙; 邹立科; 樊义康

    2016-01-01

    目的:对N,N′-二(二苯基膦基)-1-苯乙胺( NPM)的合成、结构表征及其在盐酸介质中对碳钢的缓蚀性能进行研究。方法用红外光谱、元素分析和熔点测试等方法对NPM的结构进行表征,采用静态失重法、动电位极化曲线法和电化学阻抗法研究NPM在盐酸介质中对碳钢的缓蚀作用,研究腐蚀体系温度、HCl浓度、NPM浓度和腐蚀体系静置时间对NPM缓蚀率的影响,探讨NPM在碳钢表面上的吸附机理。结果动电位极化曲线法研究结果表明NPM是一种混合型缓蚀剂。 NPM的缓蚀率随NPM浓度的增加而增大,当NPM的质量浓度为140 mg/L时,NPM在25℃的1.0 mol/L HCl 溶液中的缓蚀率达到94.71%;NPM的缓蚀率随腐蚀体系温度的升高而降低,随HCl浓度的增大而减小,但随腐蚀体系静置时间的延长缓蚀率逐渐增大。 NPM在碳钢表面的吸附符合Langmuir吸附等温方程式,属于自发进行的物理和化学吸附。结论所合成的化合物NPM是一种高效的混合型有机缓蚀剂。%Objective To study the synthesis, structure characterization and inhibition performance of N,N′-bis( di-phenylphos-phino)-1-phenylethylamine ( NPM) on carbon steel in hydrochloric acid solution. Methods The structure of synthesized NPM was characterized by means of infrared spectroscopy, elemental analysis and melting point test. And the inhibitive efficiency of NPM on carbon steel in hydrochloric acid solution was investigated using the static weight loss method, potentiodynamic polarization curve and electrochemical impedance. The influences of the corrosion system temperature, NPM concentration, hydrochloric acid concen-tration and standing time of the corrosion system on the corrosion inhibition efficiency of NPM on carbon steel were studied, and the adsorption mechanism of NPM on carbon steel surface was also discussed. Results The potentiodynamic polarization curves indica-ted that NMP acted as a mixed-type inhibitor

  16. Experimental carcinogenesis on the oropharyngeal mucosa of rats with hydrochloric acid, sodium nitrate and pepsin Carcinogênese experimental na mucosa orofaríngea de ratos com ácido clorídrico, nitrato de sódio e pepsina

    Directory of Open Access Journals (Sweden)

    André Del Negro

    2008-08-01

    Full Text Available PURPOSE: To investigate the carcinogenic action of hydrochloric acid, pepsin and sodium nitrate on the oropharyngeal mucosa of rats, simulating the reflux of gastric contents. METHODS: Eighty-two Wistar rats were divided in seven groups and submitted to 2 or 3 weekly applications of hydrochloric acid, pepsin and sodium nitrate on the pharyngeal mucosa during six months. Study groups comprised 12 animals each. Rats in groups I and II were submitted to 2 (GI or 3 (GII weekly applications of 0.1N hydrochloric acid. Groups III and IV were submitted to 2 (GIII or 3 (GIV weekly applications of 0.1N hydrochloric acid solution with pepsin. Groups V and VI were submitted to 2 (GV or 3 (GVI weekly applications of 0.1N hydrochloric acid and treated with daily nitrate diluted in water. Group VII consisted of 10 animals submitted to 2 weekly applications of filtered water. RESULTS: No dysplasia, intra-epithelial neoplasia or invasive carcinomas were detected. Inflammatory changes were observed in varying degrees and mast cells were more common in Groups V and VI (p=0.006. CONCLUSION: The data of the current study could not corroborate the hypothesis that gastroesophageal and pharyngolaryngeal refluxes are carcinogenic factors to the laryngopharyngeal mucosa, and more studies are necessary in the future.OBJETIVO: Investigar a ação carcinogênica do ácido clorídrico, pepsina e nitrato de sódio na mucosa orofaríngea de ratos, simulando o refluxo do conteúdo gástrico à mucosa do faringo-laringea. MÉTODOS: Oitenta e dois ratos Wistar foram divididos em 7 grupos e submetidos a 2 ou 3 aplicações semanais de ácido clorídrico, pepsina e nitrato de sódio na mucosa orofaríngea durante 6 meses. Os grupos de estudo envolveram 12 animais cada. Os ratos nos grupos I e II foram submetidos à 2 (GI ou 3 (GII aplicações semanais de ácido clorídrico 0,1N. Nos grupos III e IV foram 2 (GIII ou 3 (GIV aplicações semanais de ácido clorídrico e pepsina. Nos

  17. ACID RESISTANCE OF FLYASH BASED GEOPOLYMER MORTAR UNDER AMBIENT CURING AND HEAT CURING

    Directory of Open Access Journals (Sweden)

    V.Sreevidya

    2012-02-01

    Full Text Available An Experimental study was conducted to assess the Acid resistance of flyash based geopolymer mortar specimens of size 50x50x50mm with a ratio of flyash to sand as 1:3.The ratio between solution(Sodiumhydroxide and Sodium silicate solution to flyash were 0.376,0.386,0.396 and 0.416. After casting the specimens were subjected to both ambient curing and heat curing. In heat curing the specimens were kept continuously at 60oC for 24 hrs. Durability of specimens was assessed by immersing them in 5% of sulfuric acid and 5%hydrochloric acid for a period of 14 weeks. Evaluation of its resistance in terms of change in weight, compressive strength and visual appearance at regular intervals was carried out. After exposure in the acid solutions for 14 weeks, the samples showed very low weight loss. Results obtained from the present study indicate that Geopolymers are highly resistance to sulfuric acid and hydrochloric acid.

  18. 盐酸解析与水碱洗系统的酸、水生产平衡%Hydrochloric acid analysis and alkali washing system acid, water production balance

    Institute of Scientific and Technical Information of China (English)

    林涛海; 刘胜军

    2012-01-01

    以40万t/a PVC为例,对氯化氢的消耗量与盐酸的解析量进行了物料衡算。%Take 400 kt/a PVC as an example, calculating material balance between consumption of hydrogen chloride gas and resolving amount of hydrogen acid.

  19. 机械通气与盐酸氨溴索联合治疗老年急性呼吸窘迫综合症的临床效果%Mechanical Ventilation with Hydrochloric Acid Ammonia Bromine Cable Joint is the Clinical Effect of Treatment of Senile Acute Respiratory Distress Syndrome

    Institute of Scientific and Technical Information of China (English)

    张鹏

    2016-01-01

    目的:客观评价机械通气与盐酸氨溴索联合治疗老年急性呼吸窘迫综合症的临床效果。方法随机选择该院2012年1月—2015年12月接收的55例老年急性呼吸窘迫综合症患者(A组),同期选择55例老年急性呼吸窘迫综合症患者(B组)作对照,分别予以机械通气与盐酸氨溴索联合治疗、机械通气单纯治疗。结果 A组入选患者有效率81.82%,B组54.55%(P﹤0.05)。结论就老年急性呼吸窘迫综合症患者而言,选择机械通气与盐酸氨溴索联合治疗方案效果突出。%Objective To objectively evaluate mechanical ventilation with hydrochloric acid ammonia bromine cable joint is the clinical effect of treatment of senile acute respiratory distress syndrome. Methods Random selection etween January 2012 and December 2015 received 55 cases of elderly patients with acute respiratory distress syndrome (group A), at the same time choose 55 cases of elderly patients with acute respiratory distress syndrome (group B) were compared, respective-ly to mechanical ventilation with hydrochloric acid ammonia bromine cable joint treatment, mechanical ventilation therapy alone. Results In group A patients effective rate was 81.82%, 54.55% in group B (P﹤ 0.05). Conclusion In terms of el-derly patients with acute respiratory distress syndrome, mechanical ventilation and hydrochloric acid ammonia bromine joint treatment effect is prominent.

  20. Acids and bases solvent effects on acid-base strenght

    CERN Document Server

    Cox, Brian G

    2013-01-01

    Acids and bases are ubiquitous in chemistry. Our understanding of them, however, is dominated by their behaviour in water. Transfer to non-aqueous solvents leads to profound changes in acid-base strengths and to the rates and equilibria of many processes: for example, synthetic reactions involving acids, bases and nucleophiles; isolation of pharmaceutical actives through salt formation; formation of zwitter- ions in amino acids; and chromatographic separation of substrates. This book seeks to enhance our understanding of acids and bases by reviewing and analysing their behaviour in non-aqueous solvents. The behaviour is related where possible to that in water, but correlations and contrasts between solvents are also presented.

  1. Standard practice for electrolytic extraction of phases from Ni and Ni-Fe base superalloys using a hydrochloric-methanol electrolyte

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1995-01-01

    1.1 This practice covers a procedure for the isolation of carbides, borides, TCP (topologically close-packed), and GCP (geometrically close-packed) phases (Note 1) in nickel and nickel-iron base gamma prime strengthened alloys. Contamination of the extracted residue by coarse matrix (gamma) or gamma prime particles, or both, reflects the condition of the alloy rather than the techniques mentioned in this procedure. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  2. Study of nano-Ti02 thin films prepared by sol-gel in the ethanol-hydrochloric acid-water system%乙醇-盐酸-水体系中溶胶-凝胶法制备纳米TiO2薄膜的研究

    Institute of Scientific and Technical Information of China (English)

    孟丹; 王和义; 刘秀华; 丁兰岚

    2011-01-01

    以Ti (OBu)4为前驱体,设计单因素优选实验,通过溶胶凝胶-浸渍提拉法在玻璃基片上制备TiO2纳米薄膜,研究了无水乙醇、浓盐酸、超纯水对其结构和性能的影响,获得了纳米TiO2薄膜的最佳制备条件.%The nano-Ti02 films on glass was prepared from Ti( OBu)4 precursor via the sol-gel and dip-coating method. The effects of anhydrous ethanol, hydrochloric acid and ultra-pure water on structures and performances of TiO2 films were investigated by single factor optimization,and the optimum preparation conditions of TiO2 thin films were obtained.

  3. In vitro thermal profile suitability assessment of acids and bases for thermochemical ablation: underlying principles.

    Science.gov (United States)

    Freeman, Laura A; Anwer, Bilal; Brady, Ryan P; Smith, Benjamin C; Edelman, Theresa L; Misselt, Andrew J; Cressman, Erik N K

    2010-03-01

    To measure and compare temperature changes in a recently developed gel phantom for thermochemical ablation as a function of reagent strength and concentration with several acids and bases. Aliquots (0.5-1 mL) of hydrochloric acid or acetic acid and sodium hydroxide or aqueous ammonia were injected for 5 seconds into a hydrophobic gel phantom. Stepwise increments in concentration were used to survey the temperature changes caused by these reactions. Injections were performed in triplicate, measured with a thermocouple probe, and plotted as functions of concentration and time. Maximum temperatures were reached almost immediately in all cases, reaching 75 degrees C-110 degrees C at the higher concentrations. The highest temperatures were seen with hydrochloric acid and either base. More concentrated solutions of sodium hydroxide tended to mix incompletely, such that experiments at 9 M and higher were difficult to perform consistently. Higher concentrations for any reagent resulted in higher temperatures. Stronger acid and base combinations resulted in higher temperatures versus weak acid and base combinations at the same concentration. Maximum temperatures obtained are in a range known to cause tissue coagulation, and all combinations tested therefore appeared suitable for further investigation in thermochemical ablation. Because of the loss of the reaction chamber shape at higher concentrations of stronger agents, the phantom does not allow complete characterization under these circumstances. Adequate mixing of reagents to maximize heating potential and avoid systemic exposure to unreacted acid and base must be addressed if the method is to be safely employed in tissues. In addition, understanding factors that control lesion shape in a more realistic tissue model will be critical. Copyright 2010 SIR. Published by Elsevier Inc. All rights reserved.

  4. 基于差分吸收激光雷达的一种新的对流层臭氧浓度反演算法%Butanol Extraction Combined with Dilute Hydrochloric Acid Dissolution-Atomic Fluorescence Spectrometric Method for Indirect Determination of Molybdenum in Chinese Herbal Medicine

    Institute of Scientific and Technical Information of China (English)

    范广强; 刘建国; 刘文清; 陆亦怀; 张天舒; 董云升; 赵雪松

    2012-01-01

    A method for indirectly determining the molybdenum in Chinese herbal medicine by butanol extraction and dilute hydrochloric acid dissolution was established for atomic fluorescence spectrometry. The molybdoarsenate heteropoly acid, formed in the presence of As( V) and ammonium molybdate in 0. 3 mol · L-1 sulphuric acid medium, was separated and enriched in the organic solvent, then the evaporation of organic reagent was implemented and the left residue was dissolved in dilute hydrochloric acid in which the arsenic content was determined on behalf of molybdenum. In the optimum experimental conditions, molybdenum content in 0~15 μg · L-1 range depicts a good linear relationship, the detection limit and relative standard deviation of 0. 44 μg · L-1 and 1.1% were obtained, respectively. Spiked Chinese herbal medicine samples were determined with the proposed method, and recoveries of 95. 6%—101. 3% were achieved.%差分吸收激光雷达探测对流层臭氧浓度时,气溶胶的干扰会造成较大的误差.提出了一种算法,该算法能够同时反演得到对流层臭氧浓度和气溶胶消光系数,减少气溶胶对反演结果的影响.使用实验数据,分析计算了气溶胶雷达比,气溶胶波长指数、标定点气溶胶后向散射比各种变化参数对反演结果的误差.结果表明,1km以下,各种变化参数造成的反演误差小于8%,1km以上臭氧浓度误差主要来源于信号和背景噪声,各种参数反演误差小于3%.最后给出了利用该算法得到对流层臭氧浓度和气溶胶的消光系数垂直廓线,并和传统的双波长差分算法反演结果作了比较分析.实验结果表明该算法是可行的,该算法可以减少气溶胶对差分吸收激光雷达测量结果引起的误差.

  5. Solid-phase extraction of cobalt(II) from lithium chloride solutions using a poly(vinyl chloride)-based polymer inclusion membrane with Aliquat 336 as the carrier.

    Science.gov (United States)

    Kagaya, Shigehiro; Cattrall, Robert W; Kolev, Spas D

    2011-01-01

    The extraction of cobalt(II) from solutions containing various concentrations of lithium chloride, hydrochloric acid, and mixtures of lithium chloride plus hydrochloric acid is reported using a poly(vinyl chloride) (PVC)-based polymer inclusion membrane (PIM) containing 40% (w/w) Aliquat 336 as a carrier. The extraction from lithium chloride solutions and mixtures with hydrochloric acid is shown to be more effective than extraction from hydrochloric acid solutions alone. The solution concentrations giving the highest amounts of extraction are 7 mol L(-1) for lithium chloride and 8 mol L(-1) lithium chloride plus 1 mol L(-1) hydrochloric acid for mixed solutions. Cobalt(II) is easily stripped from the membrane using deionized water. The cobalt(II) species extracted into the membrane are CoCl(4)(2-) for lithium chloride solutions and HCoCl(4)(-) for mixed solutions; these form ion-pairs with Aliquat 336. It is also shown that both lithium chloride and hydrochloric acid are extracted by the PIM and suppress the extraction of cobalt(II) by forming ion-pairs in the membrane (i.e. R(3)MeN(+)·HCl(2)(-) for hydrochloric acid and R(3)MeN(+)·LiCl(2)(-) for lithium chloride).

  6. Complex Leaching Process of Scheelite in Hydrochloric and Phosphoric Solutions

    Science.gov (United States)

    Liu, Liang; Xue, Jilai; Liu, Kang; Zhu, Jun; Wang, Zengjie

    2016-09-01

    The complex leaching process of synthetic scheelite and scheelite concentrate in hydrochloric and phosphoric solutions has been investigated for improving process efficiency. A higher leaching rate, compared with the classic acid leaching process, can be obtained through the synergy of HCl and H3PO4 with appropriate W/P mole ratio, temperature, and acid concentration. For synthetic scheelite, the optimum leaching conditions were W/P mole ratio 7:1, temperature 50°C, HCl 0.72 mol/L, and stirring speed 600 rpm; for scheelite concentrate, W/P mole ratio 7:1, temperature 80°C, HCl 2.16 mol/L, and stirring speed 1000 rpm. The leaching rates under the optimized conditions can reach up to 98% or even higher. FTIR spectra analysis confirmed that the leachate composition remained as H3[PW12O40] in the range of varying W/P mole ratios, so the PO4 3- in acidic solution and phosphorus content in the leaching product could be better controlled. The function 1 - (1 - X)1/3 against leaching time was applied to fit the experimental data, and the apparent activation energy, E a, was calculated as 60.65 kJ/mol. The results would be valuable for effectively using scheelite as a raw material resource for sustainable tungsten production.

  7. A study of the clinical effect of combining use of budesonide and hydrochloric acid ammonia bromine using of ultrasonic atomization inhalation on treatment of infantile capillary bronchitis%布地奈德和盐酸氨溴索联合使用超声雾化吸入治疗婴幼儿毛细支气管炎的疗效观察

    Institute of Scientific and Technical Information of China (English)

    王海丽

    2014-01-01

    Objective To study the clinical effect of combining use of budesonide and hydrochloric acid ammonia bromine using ultrasonic atomization on treatment of infantile capillary bronchitis. Methods 80 cases of patients in our hospital were selected,randomly divided into experimental group and control group,each 40 cases,the experimental group were given basic treatment plus budesonide and ambroxol hydrochloride using ultrasonic atomizing inhalation,Compared the disappeared time of clinical symptoms and signs and the cure rate of the two groups. Results The time of clinical symptoms and signs in the experimental group were shorter than that of the observation group,the cure rate in the experimental group was significantly higher than the control group. Conclusion Using budesonide and hydrochloric acid ammonia bromine with ultrasonic atomization inhalation on treatment of infantile capillary bronchitis,can effectively shorten the time of dyspnea,suppress wheezing (such as clinical symptoms and signs of time,and improve the cure rate.The clinical application of the treatment is safe and convenient,is worth to clinical promotion.%目的:探讨布地奈德和盐酸氨溴索合用使用超声雾化治疗婴幼儿毛细支气管炎的临床效果。方法选80例来我院就诊的患儿随机分为实验组和对照组,各40例,实验组在采取基础治疗外加用布地奈德+盐酸氨溴索使用超声雾化吸入治疗,对比两组患儿临床症状、体征消失时间以及治愈率。结果实验组临床症状、体征时间均比观察组时间短,并且治愈率也明显高于对照组。结论布地奈德和盐酸氨溴索联合使用超声雾化吸入治疗婴幼儿毛细支气管炎,可以有效缩短患儿呼吸困难、憋喘等临床症状和体征缓解时间,并且提高治愈率,对于临床应用安全方便,值得临床推广。

  8. PHYSIOLOGY OF ACID BASE BALANCE

    Directory of Open Access Journals (Sweden)

    Awati

    2014-12-01

    Full Text Available Acid-base, electrolyte, and metabolic disturbances are common in the intensive care unit. Almost all critically ill patients often suffer from compound acid-base and electrolyte disorders. Successful evaluation and management of such patients requires recognition of common patterns (e.g., metabolic acidosis and the ability to dissect one disorder from another. The intensivists needs to identify and correct these condition with the easiest available tools as they are the associated with multiorgan failure. Understanding the elements of normal physiology in these areas is very important so as to diagnose the pathological condition and take adequate measures as early as possible. Arterial blood gas analysis is one such tool for early detection of acid base disorder. Physiology of acid base is complex and here is the attempt to simplify it in our day to day application for the benefit of critically ill patients.

  9. Dealloying of Cu-Based Metallic Glasses in Acidic Solutions: Products and Energy Storage Applications

    Directory of Open Access Journals (Sweden)

    Zhifeng Wang

    2015-04-01

    Full Text Available Dealloying, a famous ancient etching technique, was used to produce nanoporous metals decades ago. With the development of dealloying techniques and theories, various interesting dealloying products including nanoporous metals/alloys, metal oxides and composites, which exhibit excellent catalytic, optical and sensing performance, have been developed in recent years. As a result, the research on dealloying products is of great importance for developing new materials with superior physical and chemical properties. In this paper, typical dealloying products from Cu-based metallic glasses after dealloying in hydrofluoric acid and hydrochloric acid solutions are summarized. Several potential application fields of these dealloying products are discussed. A promising application of nanoporous Cu (NPC and NPC-contained composites related to the energy storage field is introduced. It is expected that more promising dealloying products could be developed for practical energy storage applications.

  10. Determination of silver in miscellaneous copper materials in hydrochloric acid medium by ammonia leaching-flame atomic absorption spectrometry%氨水浸取-盐酸介质火焰原子吸收光谱法测定杂铜物料中的银

    Institute of Scientific and Technical Information of China (English)

    肖红新

    2014-01-01

    The sample is dissolved in aqua regia and silver is leached by ammonia ,most other metallic elements are precipitated at the same time ,eliminating the interference .In 10%hydrochloric acid medium ,under the set equip-ment working conditions ,silver content was determined by flame atomic absorption spectrometry .The relatively stand-ard deviation of the determination results is less than 1 %.%采用王水溶解样品,氨水浸取银,同时沉淀分离大部分其他金属元素,消除其他元素干扰;在10%的盐酸介质中,在设定的仪器工作条件下,采用火焰原子吸收光谱法测定杂铜物料中的银。该方法简单快速、准确可靠,测定结果相对标准偏差小于1%。

  11. Molten fatty acid based microemulsions.

    Science.gov (United States)

    Noirjean, Cecile; Testard, Fabienne; Dejugnat, Christophe; Jestin, Jacques; Carriere, David

    2016-06-21

    We show that ternary mixtures of water (polar phase), myristic acid (MA, apolar phase) and cetyltrimethylammonium bromide (CTAB, cationic surfactant) studied above the melting point of myristic acid allow the preparation of microemulsions without adding a salt or a co-surfactant. The combination of SANS, SAXS/WAXS, DSC, and phase diagram determination allows a complete characterization of the structures and interactions between components in the molten fatty acid based microemulsions. For the different structures characterized (microemulsion, lamellar or hexagonal phases), a similar thermal behaviour is observed for all ternary MA/CTAB/water monophasic samples and for binary MA/CTAB mixtures without water: crystalline myristic acid melts at 52 °C, and a thermal transition at 70 °C is assigned to the breaking of hydrogen bounds inside the mixed myristic acid/CTAB complex (being the surfactant film in the ternary system). Water determines the film curvature, hence the structures observed at high temperature, but does not influence the thermal behaviour of the ternary system. Myristic acid is partitioned in two "species" that behave independently: pure myristic acid and myristic acid associated with CTAB to form an equimolar complex that plays the role of the surfactant film. We therefore show that myristic acid plays the role of a solvent (oil) and a co-surfactant allowing the fine tuning of the structure of oil and water mixtures. This solvosurfactant behaviour of long chain fatty acid opens the way for new formulations with a complex structure without the addition of any extra compound.

  12. The Effects of Various Acid Catalyst on the Esterification of Jatropha Curcas Oil based Trimethylolpropane Ester as Biolubricant Base Stock

    Directory of Open Access Journals (Sweden)

    Noor Hafizah Arbain

    2011-01-01

    Full Text Available Biolubricant production of trimethylolpropane ester (ET was conducted via esterification of fatty acid (FA of Jatropha curcas oil with trimethylolpropane (TMP. The condition for this reaction was as follows: temperature was 150 °C, time of reaction was 3 hours, molar ratio of FA: TMP was 4:1 and 2% wt/wt concentrated catalyst (based on weight of FA. Different catalyst was used in this reaction such as perchloric acid, sulfuric acid, p-toluenesulfonic acid, hydrochloric acid and nitric acid. The composition of ET was determined by Gas Chromatography (GC-FID. The ester group was confirmed by Fourier Transform Infrared Spectroscopy (FTIR and the structure was confirmed by proton and carbon Nuclear Magnetic Resonance (1H-NMR and 13C-NMR spectra. 70% of ET was successfully synthesized using perchloric acid in this research. The pour point of the product was observed as low as –23 °C, flash point is >300 °C and viscosity index is 150.

  13. 盐酸介质磷钒钼黄直接光度法快速测定钒浸出液中的磷%Rapid phosphorus analysis in vanadium- leached solution using direct absorbance measurement in hydrochloric acid media phosphorus - vanadium - molybdenum yellow system

    Institute of Scientific and Technical Information of China (English)

    刘继宁; 马庆; 刘忠文; 党岚

    2001-01-01

    Compared with analytical characteristics and interfering factors for different media, hydrochloric acid was chosen as media in direct absorbance measurement to analyse phosphorus of Vanadium - leached solution.In this method, ammonium sodium was chosen as chromogenic agent, under the conditions that: the coloration acidity is 1.2 N, λ = 430 nm, ε = 1 300. We concluded that when phosphorus content is between 0 ~ 400 μg,Beer' s law is obeyed; when phosphorus content is lower limit 1.67 μg(3s), the coexistence components don' t interfere with phosphorus; when phosphorus content is 50 ~ 350 μg, the adding standard sample rate of recovery is 97.76% ~ 102. 1%; when phosphorus content is 100 μg, eleven times analyses are made and given. RSD =1.52% and X = 100. 48 μ-g.%研究了不同介质中钒钼黄法的分析特性和干扰因素,选定盐酸介质建立了快速分析钒浸出液中磷的直接光度法.该方法用钼酸钠作显色剂,显色酸度1.2 N,λ=430 nm,ε=1300,0~400μg线性良好;检测下限1.67μg(3s),共存组分无干扰,50~350μg加标回收率97.6%~102.1%,100μg中重复11次分析,RSD=1.52%,X=100.48μg.

  14. 胺碘酮和普罗帕酮治疗阵发性室上性心动过速的疗效对照研究%Controlled study on effect of amiodarone and hydrochloric acid propafenone on paroxysmal supraventricular tachycardia

    Institute of Scientific and Technical Information of China (English)

    霍秋玉

    2012-01-01

    Objective To observe the clinical efficacy and safety of intravenous amiodarone and hydrochloric acid propafenone in treating paroxysmal supraventricular tachycardia. Methods Eighty patients with paroxysmal supraventricular tachycardia were divieded into group A and B randomly (40 cases in each group). Group A received amiodarone, while group B received hydrochloric acid propafenone. The effective rate of cardioversion, cardioversion time, adverse reactions and the heart rate change were compared. Results The effective rate in group A was higher than that in group B, but the difference was not statistically significant. The cardioversion time in group A was obviously longer than that in group B (P<0. 01). The heart rates in the two groups after treatment decreased obviously (P<0.01), while the heart rate in group A was obviously lower than that in group B (P<0. 01). The incidence of adverse reactions in group A was lower than that in group B, but the difference was not statistically significant. Conclusion There are advantages of both amiodarone and propafenone in the treatment of paroxysmal supraventricular tachycardia. Propafenone is applicable to acute tachycardia, but adverse reactions should be taken into consideration. The amiodarone is effective in the treatment of paroxysmal supraventricular tachycardia in spite of the slow onset.%目的 比较静脉注射胺碘酮和普罗帕酮治疗阵发性室上心动过速的临床疗效及安全性.方法 将80例室上心动过速患者随机分为A、B 2组,各40例,A组给予胺碘酮注射液治疗,B组给予普岁帕酮注射液治疗,比较2组复律成功率、复律时间、不良反应及用药前后心率的变化.结果 A组复律成功率高于B组,但差异无统计学意义(P>0.05),而复律时间显著长于B组(P<0.01);2组治疗后心率均较治疗前显著下降(P<0.01),但治疗后A组心率显著低于B组(P<0.01).A组不良反应发生率低于B组,但差异无统计学意义.结论

  15. 脂肪胺类化合物在盐酸介质中对工业纯铝缓蚀作用的研究%An investigation on the inhibition effect of aliphatic amines for aluminium in hydrochloric acid

    Institute of Scientific and Technical Information of China (English)

    帅长庚; 邓淑珍; 宋玉苏; 银继伟

    2001-01-01

    The corrosion of industrial pure aluminium in 1.0 mol.dm-3hydrochloride acid is investigated in the absence and presence of various amines,both by weight loss and electrochemistry.To begin with,the inhibition efficiency is found to follow the order: Hexamethylenetetramine>Diethylamine>n-Butylamine. With the increasing of the dipping time, the inhibition efficiency decreases gradually. The three amines, as the mixed inhibitors, has a great effect on the progress of cathodal and anodic corrosion of Al and can form a film by the adsorption on the surface of Al to protect Al from corrosion.%通过失重法、电化学方法分别研究了正丁胺、二乙胺、乌洛托品在1.0mol.dm-3HCl中对铝的缓蚀作用,并对其机理进行了探讨.研究结果表明:3种化合物对工业纯铝均具有一定的缓蚀作用.缓蚀效果:乌洛托品>二乙胺>正丁胺,随着时间的延长,它们的缓蚀效率逐渐降低.3种化合物均可在工业纯铝表面吸附成膜,抑制铝的腐蚀,为混合型缓蚀剂.

  16. Nucleic acid based logical systems.

    Science.gov (United States)

    Han, Da; Kang, Huaizhi; Zhang, Tao; Wu, Cuichen; Zhou, Cuisong; You, Mingxu; Chen, Zhuo; Zhang, Xiaobing; Tan, Weihong

    2014-05-12

    Researchers increasingly visualize a significant role for artificial biochemical logical systems in biological engineering, much like digital logic circuits in electrical engineering. Those logical systems could be utilized as a type of servomechanism to control nanodevices in vitro, monitor chemical reactions in situ, or regulate gene expression in vivo. Nucleic acids (NA), as carriers of genetic information with well-regulated and predictable structures, are promising materials for the design and engineering of biochemical circuits. A number of logical devices based on nucleic acids (NA) have been designed to handle various processes for technological or biotechnological purposes. This article focuses on the most recent and important developments in NA-based logical devices and their evolution from in vitro, through cellular, even towards in vivo biological applications.

  17. Evaluation of Chromogenic Reaction Ability of Hydrochloric Acid (Sulfuric Acid)-vanillin by the Colorimetry for Determining Tea Catechins Aggregates%茶叶儿茶素总量比色测定的盐酸(硫酸)香草醛显色反应能力评价

    Institute of Scientific and Technical Information of China (English)

    单虹丽; 卿钰; 杜晓; 刘东娜

    2012-01-01

    Chromogenic reaction level of catechins from the green tea and the black tea with hydrochloric acid (sulfuric acid-vanillin)-vanillin was determined in this paper. By determining and comparing the reaction coefficient, accuracy and precision, the color reaction ability of catechins reacted with acid vanillin was evaluated. The results showed that the reaction system was sensitive to catechins with a high linear correlation(R2HA =0.9976 ±0.001 4, R2SA =0.9978 ±0.001 8). It was also seen that the chromogenic reaction coefficients from both systems were less than the Roberts coefficient (145.68) obtained from the empirical formula for calculating catechins aggregates. The recoveries from both system were more than 94.22 % and all the variation coefficient of precision were less than 0.08 %. This showed that both systems could determinate tea catechins aggregates. The chromogenic capability of tea catechins from different sources with acid-Vanillin was very different from each other (F = 37. 434 > F0.01(1,5) =6.61). This results showed that two kinds of reaction systems could objectively reflect tea catechins aggregates. However, both recoveries and variation coefficient from the empirical formula were instable and the total catechins aggregates was higher than the reality.%测定了茶叶儿茶素及绿茶、红茶中的儿茶素与盐酸(硫酸)-香草醛的显色反应水平,通过对反应系数、准确度、精密度测定和比较,评价了儿茶素与酸性香草醛的显色反应能力.结果表明:两种酸性体系对儿茶素反应灵敏,且呈高度线性相关(R2盐酸=0.9976±0.0014,R2硫酸=0.9978±0.0018);显色反应系数上,盐酸法为34.77±10.00(绿茶)、83.83±20.13(红茶);硫酸法为39.65±8.97(绿茶)、86.68±19.87(红茶),均低于茶叶儿茶素总量经验计算公式中Roberts系数(145.68).盐酸-香草醛显色反应体系的回收率为94.22%±3.33%(绿茶)、99.71%±1.39%(红茶),精密度的变异系数为0.08

  18. Synthesis and Performance of Mannich Base Quaternary Ammonium Salt Acidizing Corrosion Inhibitor%曼尼希碱季铵盐酸化缓蚀剂的合成及性能

    Institute of Scientific and Technical Information of China (English)

    赵顺强; 孙永涛; 马增华; 付朝阳

    2014-01-01

    合成了一种新型的曼尼希碱季铵盐(BMQA)酸化缓蚀剂,通过静态失重法测试了缓蚀剂在不同浓度盐酸中的缓蚀性能。结果表明,90℃下,缓蚀剂 BMQA 在15%盐酸中加入0.1%,18%盐酸中加入0.2%,28%盐酸中加入0.5%,N80钢的腐蚀速率都能小于4 g·m-2·h-1。极化曲线测试表明该缓蚀剂是抑制阳极为主的混合型缓蚀剂,遵循 Langmuir 吸附等温式,能自发在金属表面进行化学吸附。%A new type of Mannich base quaternary ammonium salt was synthesized as an acidification corrosion inhibitor.The inhibition performance of this corrosion inhibitor was evaluated in hydrochloric acid with different concentrations by static weight loss method.The results showed that with 0.1% inhibitor in 15% hydrochloric acid, 0.2% inhibitor in 18% hydrochloric acid and 0.5% inhibitor in 28% hydrochloric acid,the corrosion rates of steel N80 were all lower than 4 g·m-2 ·h-1 at 90℃.Polarization curves indicate that the corrosion inhibitor is a mixed inhibitor but mainly prohibits the anodic corrosion process,obeys the Langmuir adsorption isothermal equation and can spontaneously absorb on the steel surface by chemisorption.

  19. Effects of hydrochloric acid modification on the channel characteristics, composition, surface potential and cation exchange behavior of natural clinoptilolite%盐酸改性对天然斜发沸石孔道特征、成分、表面电位及阳离子交换性能的影响

    Institute of Scientific and Technical Information of China (English)

    霍汉鑫; 林海; 董颖博; 刘泉利; 曹丽霞; 程皝; 汪涵; 傅川

    2015-01-01

    采用不同浓度盐酸对天然斜发沸石进行改性,并系统地研究了改性沸石的孔道特征、化学成分、表面电位及阳离子交换性能的变化.盐酸改性后,沸石晶体结构破坏较小,表面变得疏松粗糙,K+、Na+、Ca2+和Mg2+元素含量均小幅下降;表面负电荷增加,阳离子交换容量减小;比表面积和总孔体积均有所提高,最高分别从原沸石的35.97 m2·g -1和0.0761 m3·g-1提高至64.46 m2·g-1和0.1156 m3·g-1.盐酸改性对沸石微孔、介孔和大孔的分布影响明显.从迟滞回线形状判断沸石孔道类型均为不均匀狭缝型孔道,盐酸改性不会改变沸石孔道类型.%ABSTRACT Natural clinoptilolite was modified by different concentrations of hydrochloric acid. Systemic investigations were performed on the channel characteristics, chemical composition, surface potential, and cation exchange behavior of the modified clinoptilolite. It is found that the surface of the modified clinoptilolite becomes loose and rough, the contents of K+, Na+, Ca2+, and Mg2+ slightly decrease, the surface negative charges increases, and the cation exchange capacity decreases to some extent. The specif-ic surface area and total pore volume are improved and the maximum values of them increase from 35.97 m2·g-1 and 0.0761 m3·g-1 to 64.46 m2·g-1 and 0.1156 m3·g-1 , respectively. The distribution of micropores, mesopores, and macropores is obviously impacted, and the type of zeolite cavities is determined to be uneven slits by the hysteresis loop shape, indicating that this acid modification cannot change zeolite cavities.

  20. On-line Determination of Hydrochloric Acid in Process Effluent ...

    African Journals Online (AJOL)

    Prof Van Staden

    The results obtained with the proposed system were compared with the results obtained from ..... The null hypothesis which assumes that the quantities from two different ... 14 R.H. Taylor, J. Ruzicka and G.D. Christian, Talanta, 1992, 39, 285.

  1. The Acid-Base Titration of a Very Weak Acid: Boric Acid

    Science.gov (United States)

    Celeste, M.; Azevedo, C.; Cavaleiro, Ana M. V.

    2012-01-01

    A laboratory experiment based on the titration of boric acid with strong base in the presence of d-mannitol is described. Boric acid is a very weak acid and direct titration with NaOH is not possible. An auxiliary reagent that contributes to the release of protons in a known stoichiometry facilitates the acid-base titration. Students obtain the…

  2. The Acid-Base Titration of a Very Weak Acid: Boric Acid

    Science.gov (United States)

    Celeste, M.; Azevedo, C.; Cavaleiro, Ana M. V.

    2012-01-01

    A laboratory experiment based on the titration of boric acid with strong base in the presence of d-mannitol is described. Boric acid is a very weak acid and direct titration with NaOH is not possible. An auxiliary reagent that contributes to the release of protons in a known stoichiometry facilitates the acid-base titration. Students obtain the…

  3. Biodiesel Production from Spent Fish Frying Oil Through Acid-Base Catalyzed Transesterification

    Directory of Open Access Journals (Sweden)

    Abdalrahman B. Fadhil

    2012-06-01

    Full Text Available Biodiesel fuels were prepared from a special type of frying oil namely spent fish frying oil through two step transesterification viz. acid-base catalyzed transesterification. Hydrochloric acid and potassium hydroxide with methanol were used for this purpose. The oil was pre-treated with (1.0 wt% HCl and methanol to reduce free fatty acids content of the oil. Then, conditions of the base catalyzed step such as base concentration, reaction temperature, methanol to oil molar ratio and reaction time were optimized. The study raveled that, 0.50% KOH w/w of oil; a 6:1 methanol to oil molar ratio; a reaction temperature of 60°C and a duration of 1h were the optimal conditions because they resulted in high biodiesel yield. Fuel properties of the products were assessed and found better than those of the parent oil. Furthermore, they met the specified limits according to the ASTM standards. Thin layer chromatography was used as a simple technique to monitor the transesterification of the oil. Blending of the optimal biodiesel sample with petro diesel using specified volume percentages was done as well. The results indicated that biodiesel had slight effect on the values of the assessed properties.

  4. Thermal infrared images to quantify thermal ablation effects of acid and base on target tissues

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Ran, E-mail: jliubme@tsinghua.edu.cn, E-mail: liuran@tsinghua.edu.cn; Liu, Jing, E-mail: jliubme@tsinghua.edu.cn, E-mail: liuran@tsinghua.edu.cn [Department of Biomedical Engineering, School of Medicine, Tsinghua University, Beijing 100084 (China); Wang, Jia [Department of Biomedical Engineering, Johns Hopkins University, Baltimore, MD 21218 (United States)

    2015-07-15

    Hyperthermia (42-46°C), treatment of tumor tissue through elevated temperature, offers several advantages including high cost-effectiveness, highly targeted ablation and fewer side effects and hence higher safety level over traditional therapies such as chemotherapy and radiotherapy. Recently, hyperthermia using heat release through exothermic acid-base neutralization comes into view owing to its relatively safe products of salt and water and highly confined ablation. However, lack of quantitative understanding of the spatial and temporal temperature profiles that are produced by simultaneous diffusion of liquid chemical and its chemical reaction within tumor tissue impedes the application of this method. This article is dedicated to quantify thermal ablation effects of acid and base both individually and as in neutralization via infrared captured thermal images. A theoretical model is used to approximate specific heat absorption rate (SAR) based on experimental measurements that contrast two types of tissue, normal pork and pig liver. According to the computation, both pork and liver tissue has a higher ability in absorbing hydrochloric acid (HCl) than sodium hydroxide, hence suggesting that a reduced dosage for HCl is appropriate in a surgery. The heating effect depends heavily on the properties of tissue types and amount of chemical reagents administered. Given thermal parameters such as SAR for different tissues, a computational model can be made in predicting temperature transitions which will be helpful in planning and optimizing surgical hyperthermia procedures.

  5. Thermal infrared images to quantify thermal ablation effects of acid and base on target tissues

    Directory of Open Access Journals (Sweden)

    Ran Liu

    2015-07-01

    Full Text Available Hyperthermia (42-46°C, treatment of tumor tissue through elevated temperature, offers several advantages including high cost-effectiveness, highly targeted ablation and fewer side effects and hence higher safety level over traditional therapies such as chemotherapy and radiotherapy. Recently, hyperthermia using heat release through exothermic acid-base neutralization comes into view owing to its relatively safe products of salt and water and highly confined ablation. However, lack of quantitative understanding of the spatial and temporal temperature profiles that are produced by simultaneous diffusion of liquid chemical and its chemical reaction within tumor tissue impedes the application of this method. This article is dedicated to quantify thermal ablation effects of acid and base both individually and as in neutralization via infrared captured thermal images. A theoretical model is used to approximate specific heat absorption rate (SAR based on experimental measurements that contrast two types of tissue, normal pork and pig liver. According to the computation, both pork and liver tissue has a higher ability in absorbing hydrochloric acid (HCl than sodium hydroxide, hence suggesting that a reduced dosage for HCl is appropriate in a surgery. The heating effect depends heavily on the properties of tissue types and amount of chemical reagents administered. Given thermal parameters such as SAR for different tissues, a computational model can be made in predicting temperature transitions which will be helpful in planning and optimizing surgical hyperthermia procedures.

  6. Determination of aluminum in aluminum electrolyte by EDTA back titration with ethanol-cuprous chloride-ammonium chloride-hydrochloric acid complex solvent separation%乙醇-氯化亚铜-氯化铵-盐酸复合溶剂分离-EDTA返滴定法测定铝电解质中单质铝

    Institute of Scientific and Technical Information of China (English)

    蒲秋梅; 任凤莲; 曹福悦

    2011-01-01

    新型低温铝电解质体系物相组成复杂,单质铝的分离测定尤为困难.本文采用高选择性复合溶剂乙醇-氯化亚铜-氯化铵-盐酸(ECAH)直接分离后测定铝电解质中单质铝,成功解决了单质铝与其它铝的化合物分离困难的问题,有效降低了铝电解质溶样时铝的氟化物的微溶效应带来的误差,为铝电解质中单质铝的物相分析提供了可靠的研究方案.采用经典ED-TA络合返滴定法测得铝电解质样品中单质铝含量,加标回收率在97%~103%之间,RSD(n=6)为1.1%和1.5%.测定结果和Al-CAS-OP-CPC四元络合光度法测定结果进行比对,结果一致.%It was particularly difficult to separate and determine aluminum in new low-temperature aluminum electrolyte system because of its complicated components. In this paper, aluminum in aluminum electrolyte was directly separated and determined using high-selectivity ethanol -cuprous chlorideammomum chloride-hydrochloric acid (ECAH) as complex solvent. This method successfully settled the problem of difficult separation of aluminum from aluminum compounds, effectively reduced the determination error introduced by slight soluble effect of fluoride of aluminum during the dissolution of aluminum electrolyte, and provided a reliable research method for the phase analysis of aluminum in aluminum electrolyte. Aluminum in aluminum electrolyte samples was determined by classic EDTA complexing back titration method. The standard addition recoveries were 97%-103 %, and the relative standard deviations (RSD, n=6) were 1. 1 % and 1. 5 %, respectively. The determination results were in good agreement with those obtained by Al-CAS-OP-CPC quaternary complex photometry.

  7. Quantification of Multi Elements in Geological Samples by Inductively Coupled Plasma-Mass Spectrometry with Pressurized Decomposition-Hydrochloric Acid Extraction%封闭压力酸溶-盐酸提取-电感耦合等离子体质谱法测定地质样品中的多元素

    Institute of Scientific and Technical Information of China (English)

    张保科; 温宏利; 王蕾; 马生凤; 巩爱华

    2011-01-01

    Rock, soil, sediments and other geological samples can be effectively decomposed by acid under high temperature and pressure, and be measured by Inductively Coupled Plasma-Mass Spectrometry ( ICP-MS ). The recoveries of most elements were satisfactory, except for the results of Zr, Hf, REEs, Rb, Th, and U. In this paper, the traditional pressurized acid digestion method has been improved as the sample was extracted by hydrochloric acid instead of nitric acid. 46 elements in the National Standard Materials of rock, soil and sediments can be accurately determined by this improved method. Sample weight was increased from 25 mg to 100m and digestion time was extended from 12 h to 48 h,which effectively resolved the problems including the representation of the samples and inadequate results for Rb, Sr, REEs and other elements dissolved by HN03. The results of many experiments showed that the 44 elements measured were consistent with standard values except for As and V elements, according to Cl interference in ICP-MS. Detection limits of the improved method were 0. 01 -0. 85 μg/g, with a precision RSD( n = 10 ) of 0. 73% -13. 1% and an accuracy RE( n = 10 )of less than 10%. The improved method is accurate, reliable and suitable for avariety of different types of geological samples.%高温、高压封闭压力酸溶可有效分解岩石、土壤、沉积物等地质样品,采用电感耦合等离子体质谱法(ICP-MS)进行测定,大部分元素可得到满意的回收率;但Zr、Hf、REEs、Rb、Th、U等元素用硝酸复溶困难,测定结果不准确.本文对传统的封闭压力酸溶方法进行改进,用盐酸复溶提取代替硝酸复溶提取,ICP-MS法测定岩石、土壤、沉积物等国家一级标准物质中Li、Be、Cr、Mn、Co、Ni、Cu、Zn、Ga、Rb、Sr、Mo、Cd、In、Cs、Ba、Ti、Zr、Nb、Sn、Sb、W、Hf、Ta、Tl、Pb、Bi、Th、U以及稀土元素(REEs)等46个元素.将原方法中的称样量25 mg加大至100 mg,溶样时间由12 h

  8. Nucleic Acid-Based Nanoconstructs

    Science.gov (United States)

    Focuses on the design, synthesis, characterization, and development of spherical nucleic acid constructs as effective nanotherapeutic, single-entity agents for the treatment of glioblastoma multiforme and prostate cancers.

  9. Inhibition of acidic corrosion of carbon steel by some mono and bis azo dyes based on 1,5 dihydroxynaphihalene.

    Science.gov (United States)

    Abdallah, Metwally; Moustafa, Moustafa E

    2004-01-01

    Inhibition of the corrosion of carbon steel in hydrochloric acid solution by some mono- and bis-azo dyes based on 1,5-dihydroxynaphthalene was studied in relation to the concentration of inhibitors using weight loss and potentiostatic polarization techniques. The percentage inhibition efficiency calculated from two methods is in a good agreement with each other. The inhibition mechanism of the additives was ascribed to the formation of complex compound adsorbed on the metal surface. The adsorption process follows Freundlich adsorption isotherm. The formation of the complex compound was studied by conductometric and potentiometric titrations. The stability constants of the Fe-complexes were determined using the latter technique and related to the inhibition efficiency.

  10. Expression of NGF in the respiratory tract mucosa of the repetitive oesphageal stimulation by hydrochloric acid in guinea pig%神经生长因子在多次盐酸灌注食管气道高反应豚鼠肺组织中的表达

    Institute of Scientific and Technical Information of China (English)

    李芹子; 孔灵菲; 张宝辉; 张姝娜; 孙淑华

    2010-01-01

    目的 观察多次盐酸灌注豚鼠食管对呼吸道黏膜内神经生长因子(nerve growth factor,NGF)物质表达的影响.方法 将20只豚鼠按随机数字表法分为2组,每组10只.①模型组:用盐酸氯胺酮将豚鼠轻度麻醉,将5F胃管插入豚鼠食管至食管中下端,灌注含0.5%胃蛋白酶的盐酸(0.1 mol/L,8滴/min,20 min/d),连续灌注14 d;②对照组:用PBS代替盐酸灌注食管,方法同上.用免疫组织化学方法测定两组豚鼠肺组织NGF的免疫反应变化;用免疫印迹法(Western blotting)检测肺组织NGF的免疫反应变化;Metamoph图像分析系统对结果进行分析.结果 免疫组织化学结果显示(染色反应强度用灰度值表示):模型组豚鼠气管和细支气管黏膜内NGF物质阳性反应的平均灰度值明显地低于对照组[(108.46±9.89)vs(135.86±4.01)](P<0.01).Western blotting显示NGF在模型组豚鼠的肺内平均相对光密度值明显强于对照组[(1.415±0.155)vs(0.550±0.039)](P<0.01).结论 多次盐酸灌注豚鼠食管后呼吸道黏膜内NGF物质表达明显增多,提示NGF可能参与胃食管反流性呼吸系统疾病的发病过程.%Objective To observe the expression of nerve growth factor(NGF)in respiratory tract mueosa of the repetitive esophageal stimulation by hydrochloric acid(HCl)in guinea pigs.Methods Twenty adult guinea pigs were randomly divided into two groups(n=10):①HCl model group:On the day of experimentation,guinea pigs were maintained under ketamine anesthesia.A 5F catheter was inserted through the mouth and into the lumen of the middle and lower oesophagus.The oesophagus of each animal was perfused with HCl-P for 20 min/d for 14 d.②PBS control group:The oesophagus of each animal was perfused with PBS.The alterations of NGF immunoreactivity were investigated by immunohistochemical and Western blotting method and analyzed by the Metamoph analysisi system.Results Immunohistochemistry demonstrated that the mean grey values of NGF positive

  11. The Conjugate Acid-Base Chart.

    Science.gov (United States)

    Treptow, Richard S.

    1986-01-01

    Discusses the difficulties that beginning chemistry students have in understanding acid-base chemistry. Describes the use of conjugate acid-base charts in helping students visualize the conjugate relationship. Addresses chart construction, metal ions, buffers and pH titrations, and the organic functional groups and nonaqueous solvents. (TW)

  12. The Kidney and Acid-Base Regulation

    Science.gov (United States)

    Koeppen, Bruce M.

    2009-01-01

    Since the topic of the role of the kidneys in the regulation of acid base balance was last reviewed from a teaching perspective (Koeppen BM. Renal regulation of acid-base balance. Adv Physiol Educ 20: 132-141, 1998), our understanding of the specific membrane transporters involved in H+, HCO , and NH transport, and especially how these…

  13. Students' Alternate Conceptions on Acids and Bases

    Science.gov (United States)

    Pan, Hanqing; Henriques, Laura

    2015-01-01

    Knowing what students bring to the classroom can and should influence how we teach them. This study is a review of the literature associated with secondary and postsecondary students' ideas about acids and bases. It was found that there are six types of alternate ideas about acids and bases that students hold. These are: macroscopic properties of…

  14. The Kidney and Acid-Base Regulation

    Science.gov (United States)

    Koeppen, Bruce M.

    2009-01-01

    Since the topic of the role of the kidneys in the regulation of acid base balance was last reviewed from a teaching perspective (Koeppen BM. Renal regulation of acid-base balance. Adv Physiol Educ 20: 132-141, 1998), our understanding of the specific membrane transporters involved in H+, HCO , and NH transport, and especially how these…

  15. Boronic acid-based autoligation of nucleic acids

    DEFF Research Database (Denmark)

    Barbeyron, R.; Vasseur, J.-J.; Smietana, M.;

    2013-01-01

    Abstract: The development of synthetic systems displaying dynamic and adaptive characteristics is a formidable challenge with wide applications from biotechnology to therapeutics. Recently, we described a dynamic and programmable nucleic acid-based system relying on the formation of reversible...... boronate internucleosidic linkages. The DNA- or RNA-templated system comprises a 5′-ended boronic acid probe connecting a 3′-ended ribonucleosidic oligonucleotide partner. To explore the dominant factors that control the reversible linkage, we synthesized a series of 3′-end modified ribonucleotidic strands...

  16. Whole body acid-base modeling revisited.

    Science.gov (United States)

    Ring, Troels; Nielsen, Søren

    2017-04-01

    The textbook account of whole body acid-base balance in terms of endogenous acid production, renal net acid excretion, and gastrointestinal alkali absorption, which is the only comprehensive model around, has never been applied in clinical practice or been formally validated. To improve understanding of acid-base modeling, we managed to write up this conventional model as an expression solely on urine chemistry. Renal net acid excretion and endogenous acid production were already formulated in terms of urine chemistry, and we could from the literature also see gastrointestinal alkali absorption in terms of urine excretions. With a few assumptions it was possible to see that this expression of net acid balance was arithmetically identical to minus urine charge, whereby under the development of acidosis, urine was predicted to acquire a net negative charge. The literature already mentions unexplained negative urine charges so we scrutinized a series of seminal papers and confirmed empirically the theoretical prediction that observed urine charge did acquire negative charge as acidosis developed. Hence, we can conclude that the conventional model is problematic since it predicts what is physiologically impossible. Therefore, we need a new model for whole body acid-base balance, which does not have impossible implications. Furthermore, new experimental studies are needed to account for charge imbalance in urine under development of acidosis.

  17. Acid-base disorders: learning the basics.

    Science.gov (United States)

    Ayers, Phil; Dixon, Carman; Mays, Andrew

    2015-02-01

    Nutrition support practitioners should be confident in their ability to recognize and treat various metabolic and respiratory disorders encountered in daily practice. A clinician's comprehension of the underlying physiologic processes and/or exogenous causes that occur during acid-base disorders is essential when making therapeutic decisions regarding fluids, parenteral nutrition, and electrolyte management. This invited review will discuss basic metabolic and respiratory disorders while briefly addressing mixed acid-base disorders. © 2014 American Society for Parenteral and Enteral Nutrition.

  18. A Direct, Biomass-Based Synthesis of Benzoic Acid: Formic Acid-Mediated Deoxygenation of the Glucose-Derived Materials Quinic Acid and Shikimic Acid

    Energy Technology Data Exchange (ETDEWEB)

    Arceo, Elena; Ellman, Jonathan; Bergman, Robert

    2010-05-03

    An alternative biomass-based route to benzoic acid from the renewable starting materials quinic acid and shikimic acid is described. Benzoic acid is obtained selectively using a highly efficient, one-step formic acid-mediated deoxygenation method.

  19. Thermal degradation kinetics of polylactic acid/acid fabricated cellulose nanocrystal based bionanocomposites.

    Science.gov (United States)

    Monika; Dhar, Prodyut; Katiyar, Vimal

    2017-11-01

    Cellulose nanocrystals (CNC) are fabricated from filter paper (as cellulosic source) by acid hydrolysis using different acids such as sulphuric (H2SO4), phosphoric (H3PO4), hydrochloric (HCl) and nitric (HNO3) acid. The resulting acid derived CNC are melt mixed with Polylactic acid (PLA) using extruder at 180°C. Thermogravimetric (TGA) result shows that increase in 10% and 50% weight loss (T10, T50) temperature for PLA-CNC film fabricated with HNO3, H3PO4 and HCl derived CNC have improved thermal stability in comparison to H2SO4-CNC. Nonisothermal kinetic studies are carried out with modified-Coats-Redfern (C-R), Ozawa-Flynn-Wall (OFW) and Kissinger method to predict the kinetic and thermodynamic parameters. Subsequently prediction of these parameter leads to the proposal of thermal induced degradation mechanism of nanocomposites using Criado method. The distribution of Ea calculated from OFW model are (PLA-H3PO4-CNC: 125-139 kJmol(-1)), (PLA-HNO3-CNC: 126-145 kJmol(-1)), (PLA-H2SO4-CNC: 102-123 kJmol(-1)) and (PLA-HCl-CNC: 140-182 kJmol(-1)). This difference among Ea for the decomposition of PLA-CNC bionanocomposite is probably due to various acids used in this study. The Ea calculated by these two methods are found in consonance with that observed from Kissinger method. Further, hyphenated TG-Fourier transform infrared spectroscopy (FTIR) result shows that gaseous products such as CO2, CO, lactide, aldehydes and other compounds are given off during the thermal degradation of PLA-CNC nanocomposite. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Pseudo-emulsion based hollow fibre strip dispersion (PEHFSD) technique for permeation of Cr(VI) using Cyanex-923 as carrier.

    Science.gov (United States)

    Sonawane, Jagannath V; Pabby, Anil K; Sastre, Ana M

    2010-02-15

    Pseudo-emulsion based hollow fibre strip dispersion (PEHFSD) technique is investigated for the permeation-separation of chromium from hydrochloric acid media. The permeation of Cr(VI) is investigated in relation to various experimental variables: hydrodynamic conditions, the concentration of Cr(VI) and HCl in the feed phase, Cyanex-923 concentration, hydrazine sulphate as the stripping agent in the pseudo-emulsion phase. The performance of the PEHFSD was analyzed and optimum conditions are suggested for chromium separation from simulated industrial waste in a hydrochloric acid media.

  1. Acid-base balance in heart failure.

    Science.gov (United States)

    Frangiosa, A; De Santo, L S; Anastasio, P; De Santo, N G

    2006-01-01

    In end-stage heart failure, various acid-base disorders can be discovered due to the renal loss of hydrogen ions and hydrogen ion movements into cells, the reduction of the effective circulating volume, hypoxemia and renal failure. This justifies the occurrence of metabolic alkalosis, metabolic acidosis, respiratory alkalosis, as well as respiratory acidosis alone or in combination. Several studies have been published on the acid-base state in heart failure. In a 1951 study, Squires et al analyzed the distribution of body fluid in congestive heart failure by taking into consideration the abnormalities in serum electrolyte concentration and in acid-base equilibrium. A recent study by Milionis et al, analyzed 86 patients with congestive heart failure receiving conventional treatment; the majority of these patients exhibited hypokalemia, hyponatremia, hypocalcemia and hypophosphatemia. Disorders in acid-base balance were noted in 37.2% of patients. In a recent study, 70 patients with severe congestive heart failure before heart transplantation showed high-normal pH, slightly reduced pCO 2 and a slight loss of hydrogen ions. After heart transplantation, stability of blood pH and hydrogen ion concentrations was found. In contrast, bicarbonate and pCO 2 increased significantly. The data led us to formulate the diagnosis of a mixed acid-base disorder that includes respiratory alkalosis and metabolic alkalosis before heart transplantation. In heart failure, the presence of acid-base imbalance associated with the activation of mechanisms that lead to salt and water retention reveals evidence concerning the pivotal role of the kidney in determining the outcome of these patients.

  2. Hypokalemic paralysis and acid-base balance

    Directory of Open Access Journals (Sweden)

    Ivo Casagranda

    2006-10-01

    Full Text Available Three cases of hypokalemic paralysis are reported, presenting to the Emergency Department. The first is a patient with a hypokalemic periodic paralysis with a normal acid-base status, the second is a case of hypokalemic flaccid paralysis of all extremities with a normal anion gap metabolic acidosis, the last is a patient with a hypokalemic distal paralysis of right upper arm with metabolic alkalosis. Afterwards some pathophysiologic principles and the clinical aspects of hypokalemia are discussed and an appropriate approach to do in Emergency Department, to identify the hypokalemic paralysis etiologies in the Emergency Department, is presented, beginning from the evaluation of acid-base status.

  3. Fermented probiotic beverages based on acid whey

    Directory of Open Access Journals (Sweden)

    Katarzyna Skryplonek

    2015-12-01

    Full Text Available Background. Production of fermented probiotic beverages can be a good method for acid whey usage. The obtained products combine a high nutritional value of whey with health benefits claimed for probiotic bac- teria. The aim of the study was to define quality properties of beverages based on fresh acid whey and milk with addition of buttermilk powder or sweet whey powder. Material and methods. Samples were inoculated with two strains of commercial probiotic cultures: Lac- tobacillus acidophilus La-5 or Bifidobacterium animalis Bb-12. After fermentation, samples were stored at refrigerated conditions. After 1, 4, 7, 14 and 21 days sensory characteristics, hardness, acetaldehyde content, titratable acidity, pH acidity and count of bacteria cells were evaluated. Results. Throughout all storage period, the number of bacteria was higher than 8 log cfu/ml in the all sam- ples. Beverages with La-5 strain had higher hardness and acidity, whilst samples with Bb-12 contained more acetaldehyde. Samples with buttermilk powder had better sensory properties than with sweet whey powder. Conclusions. Obtained products made of acid whey combined with milk and fortified with buttermilk pow- der or sweet whey powder, are good medium for growth and survival of examined probiotic bacteria strains. The level of bacteria was sufficient to provide health benefits to consumers.

  4. Glycine/Glycolic acid based copolymers

    NARCIS (Netherlands)

    in 't Veld, P.J.A.; in 't Veld, Peter J.A.; Shen, Zheng-Rong; Shen, Z.; Takens, Gijsbert A.J.; Takens, G.A.J.; Dijkstra, Pieter J.; Feijen, Jan

    1994-01-01

    Glycine/glycolic acid based biodegradable copolymers have been prepared by ring-opening homopolymerization of morpholine-2,5-dione, and ring-opening copolymerization of morpholine-2,5-dione and glycolide. The homopolymerization of morpholine-2,5-dione was carried out in the melt at 200°C for 3 min

  5. Jigsaw Cooperative Learning: Acid-Base Theories

    Science.gov (United States)

    Tarhan, Leman; Sesen, Burcin Acar

    2012-01-01

    This study focused on investigating the effectiveness of jigsaw cooperative learning instruction on first-year undergraduates' understanding of acid-base theories. Undergraduates' opinions about jigsaw cooperative learning instruction were also investigated. The participants of this study were 38 first-year undergraduates in chemistry education…

  6. The Magic Sign: Acids, Bases, and Indicators.

    Science.gov (United States)

    Phillips, Donald B.

    1986-01-01

    Presents an approach that is used to introduce elementary and junior high students to a series of activities that will provide concrete experiences with acids, bases, and indicators. Provides instructions and listings of needed solutions and materials for developing this "magic sign" device. Includes background information and several…

  7. Jigsaw Cooperative Learning: Acid-Base Theories

    Science.gov (United States)

    Tarhan, Leman; Sesen, Burcin Acar

    2012-01-01

    This study focused on investigating the effectiveness of jigsaw cooperative learning instruction on first-year undergraduates' understanding of acid-base theories. Undergraduates' opinions about jigsaw cooperative learning instruction were also investigated. The participants of this study were 38 first-year undergraduates in chemistry education…

  8. Glycine/Glycolic acid based copolymers

    NARCIS (Netherlands)

    Veld, in 't Peter J.A.; Shen, Zheng-Rong; Takens, Gijsbert A.J.; Dijkstra, Pieter J.; Feijen, Jan

    1994-01-01

    Glycine/glycolic acid based biodegradable copolymers have been prepared by ring-opening homopolymerization of morpholine-2,5-dione, and ring-opening copolymerization of morpholine-2,5-dione and glycolide. The homopolymerization of morpholine-2,5-dione was carried out in the melt at 200°C for 3 min u

  9. The first proton sponge-based amino acids: synthesis, acid-base properties and some reactivity.

    Science.gov (United States)

    Ozeryanskii, Valery A; Gorbacheva, Anastasia Yu; Pozharskii, Alexander F; Vlasenko, Marina P; Tereznikov, Alexander Yu; Chernov'yants, Margarita S

    2015-08-21

    The first hybrid base constructed from 1,8-bis(dimethylamino)naphthalene (proton sponge or DMAN) and glycine, N-methyl-N-(8-dimethylamino-1-naphthyl)aminoacetic acid, was synthesised in high yield and its hydrobromide was structurally characterised and used to determine the acid-base properties via potentiometric titration. It was found that the basic strength of the DMAN-glycine base (pKa = 11.57, H2O) is on the level of amidine amino acids like arginine and creatine and its structure, zwitterionic vs. neutral, based on the spectroscopic (IR, NMR, mass) and theoretical (DFT) approaches has a strong preference to the zwitterionic form. Unlike glycine, the DMAN-glycine zwitterion is N-chiral and is hydrolytically cleaved with the loss of glycolic acid on heating in DMSO. This reaction together with the mild decarboxylative conversion of proton sponge-based amino acids into 2,3-dihydroperimidinium salts under air-oxygen was monitored with the help of the DMAN-alanine amino acid. The newly devised amino acids are unique as they combine fluorescence, strongly basic and redox-active properties.

  10. Recovery of Pd(II) from hydrochloric solution using polyallylamine hydrochloride-modified Escherichia coli biomass.

    Science.gov (United States)

    Park, Jiyeong; Won, Sung Wook; Mao, Juan; Kwak, In Seob; Yun, Yeoung-Sang

    2010-09-15

    A new type of biosorbent able to bind anionic metals was developed by cross-linking of waste biomass Escherichia coli with polyallylamine hydrochloride (PAH). The PAH-modified biomass was investigated for the removal and recovery of Pd(II), in the chloro-complex form, from aqueous solution. The performance of the PAH-modified biomass was evaluated in terms of the following parameters: the solution pH, contact time and initial metal concentration. In the pH edge experiments, the uptake of Pd(II) increased with increasing pH. Pd(II) biosorption proceeded rapidly in the first 10 min, with almost complete equilibrium being achieved within 60 min. Moreover, the isotherm data showed that the maximum uptakes of Pd(II) were 265.3mg/g at pH 3 and 212.9 mg/g at pH 2, respectively. After incineration of the Pd-loaded PAH-modified biomass, metallic palladium was recovered in the ash. X-ray photoelectron spectroscopy (XPS) results confirmed that the palladium was recovered in two valency states: zero-valent and divalent palladium (as PdO). Therefore, we concluded that PAH-modified biomass is a useful and cost-effective biosorbent for the recovery of anionic precious metals as chloro-complex solutions containing hydrochloric acid produced from metal refining processes.

  11. The corrosion behaviour of WC-VC-Co hardmetals in acidic media

    Energy Technology Data Exchange (ETDEWEB)

    Konadu, D.S.; Merwe, J. van der [DST/NRF Centre of Excellence in Strong Materials, School of Chemical and Metallurgical Engineering, University of the Witwatersrand, P.O. Private Bag 3, WITS 2050 (South Africa); Potgieter, J.H. [School of Biology, Chemistry and Health Sciences, Division of Chemistry and Materials, Manchester Metropolitan University, Oxford Road, Manchester M 1 5GD (United Kingdom); Potgieter-Vermaak, S. [School of Chemistry, University of the Witwatersrand, P.O. Private Bag 3, WITS 2050 (South Africa); Machio, C.N., E-mail: cmachio@csir.co.z [Council for Scientific and Industrial Research (CSIR), Materials Science and Manufacturing, P.O. Box 395, PRETORIA 0001 (South Africa)

    2010-09-15

    The effect of increasing vanadium carbide (VC) content on the corrosion behaviour of tungsten carbide - 10 wt% cobalt hardmetals was investigated in 1 M hydrochloric (HCl), and sulphuric (H{sub 2}SO{sub 4}) acids solutions. Increasing VC content makes the open circuit potential (OCP) in the test solutions more negative than the base alloy. Specimens exhibited pseudo passivation in all the test solutions. Increasing VC led to decreasing corrosion current density. However, the corrosion current densities during chronoamperometric tests were lower for 0 wt% VC. XRD and Raman spectroscopy showed that hydrated WO{sub 3} formed in the surface films of all specimens in hydrochloric acid (HCl), while hydrated vanadyl sulphate also formed for higher VC content specimens in sulphuric acid (H{sub 2}SO{sub 4}).

  12. Investigating Students' Reasoning about Acid-Base Reactions

    Science.gov (United States)

    Cooper, Melanie M.; Kouyoumdjian, Hovig; Underwood, Sonia M.

    2016-01-01

    Acid-base chemistry is central to a wide range of reactions. If students are able to understand how and why acid-base reactions occur, it should provide a basis for reasoning about a host of other reactions. Here, we report the development of a method to characterize student reasoning about acid-base reactions based on their description of…

  13. Effects of organic acids on thermal inactivation of acid and cold stressed Enterococcus faecium.

    Science.gov (United States)

    Fernández, Ana; Alvarez-Ordóñez, Avelino; López, Mercedes; Bernardo, Ana

    2009-08-01

    In this study the adaptative response to heat (70 degrees C) of Enterococcus faecium using fresh and refrigerated (at 4 degrees C for up to 1 month) stationary phase cells grown in Brain Heart Infusion (BHI) buffered at pH 7.4 (non-acid-adapted cells) and acidified BHI at pH values of 6.4 and 5.4 with acetic, ascorbic, citric, lactic, malic and hydrochloric acids (acid-adapted cells) was evaluated. In all cases, the survival curves obtained were concave upward. A mathematical model based on the Weibull distribution accurately described the inactivation kinetic. The results indicate that previous adaptation to a low pH increased the bacterial heat resistance, whereas the subsequent cold storage of cells reduced E. faecium thermal tolerance. Fresh acid-adapted cells showed t(2.5)-values (time needed to obtain an inactivation level of 2.5 log10 cycles) ranging from 2.57 to 9.51 min, while non-acid-adapted cells showed t(2.5)-values of 1.92 min. The extent of increased heat tolerance varied with the acid examined, resulting in the following order: citric > or = acetic > malic > or = lactic > hydrochloric > or = ascorbic. In contrast, cold storage progressively decreased E. faecium thermal resistance. The t(2.5) values found at the end of the period studied were about 2-3-fold lower than those corresponding to non-refrigerated cells, although this decrease was more marked (about 5-fold) when cells were grown in buffered BHI and BHI acidified at pH 5.4 with hydrochloric acid. These findings highlight the need for a better understanding of microbial response to various preservation stresses in order to increase the efficiency of thermal processes and to indicate the convenience of counterbalancing the benefits of the hurdle concept.

  14. EFFECT OF CASEIN-BASED SEMISYNTHETIC FOOD ON RENAL ACID EXCRETION AND ACID-BASE STATE OF BLOOD IN DOGS

    NARCIS (Netherlands)

    ZIJLSTRA, WG; LANGBROEK, AJM; KRAAN, J; RISPENS, P; NIJMEIJER, A

    1995-01-01

    Urinary acid excretion and blood acid-base stare were determined in dogs fed a casein-based semi-synthetic food (SSF), to which different amounts of salts had been added, in comparison with feeding normal dog food. Net acid excretion (NAE) and inorganic acid excretion (IAE) increased during SSF feed

  15. 49 CFR 173.158 - Nitric acid.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Nitric acid. 173.158 Section 173.158... Nitric acid. (a) Nitric acid exceeding 40 percent concentration may not be packaged with any other material. (b) Nitric acid in any concentration which does not contain sulfuric acid or hydrochloric acid as...

  16. Bipolar Membranes for Acid Base Flow Batteries

    Science.gov (United States)

    Anthamatten, Mitchell; Roddecha, Supacharee; Jorne, Jacob; Coughlan, Anna

    2011-03-01

    Rechargeable batteries can provide grid-scale electricity storage to match power generation with consumption and promote renewable energy sources. Flow batteries offer modular and flexible design, low cost per kWh and high efficiencies. A novel flow battery concept will be presented based on acid-base neutralization where protons (H+) and hydroxyl (OH-) ions react electrochemically to produce water. The large free energy of this highly reversible reaction can be stored chemically, and, upon discharge, can be harvested as usable electricity. The acid-base flow battery concept avoids the use of a sluggish oxygen electrode and utilizes the highly reversible hydrogen electrode, thus eliminating the need for expensive noble metal catalysts. The proposed flow battery is a hybrid of a battery and a fuel cell---hydrogen gas storing chemical energy is produced at one electrode and is immediately consumed at the other electrode. The two electrodes are exposed to low and high pH solutions, and these solutions are separated by a hybrid membrane containing a hybrid cation and anion exchange membrane (CEM/AEM). Membrane design will be discussed, along with ion-transport data for synthesized membranes.

  17. A New Green Ionic Liquid-Based Corrosion Inhibitor for Steel in Acidic Environments

    Directory of Open Access Journals (Sweden)

    Ayman M. Atta

    2015-06-01

    Full Text Available This work examines the use of new hydrophobic ionic liquid derivatives, namely octadecylammonium tosylate (ODA-TS and oleylammonium tosylate (OA-TS for corrosion protection of steel in 1 M hydrochloric acid solution. Their chemical structures were determined from NMR analyses. The surface activity characteristics of the prepared ODA-TS and OA-TS were evaluated from conductance, surface tension and contact angle measurements. The data indicate the presence of a double bond in the chemical structure of OA-TS modified its surface activity parameters. Potentiodynamic polarization, electrochemical impedance spectroscopy (EIS measurements, scanning electron microscope (SEM, Energy dispersive X-rays (EDX analysis and contact angle measurements were utilized to investigate the corrosion protection performance of ODA-TS and OA-TS on steel in acidic solution. The OA-TS and ODA-TS compounds showed good protection performance in acidic chloride solution due to formation of an inhibitive film on the steel surface.

  18. Biodegradable polyesters based on succinic acid

    Directory of Open Access Journals (Sweden)

    Nikolić Marija S.

    2003-01-01

    Full Text Available Two series of aliphatic polyesters based on succinic acid were synthesized by copolymerization with adipic acid for the first series of saturated polyesters, and with fumaric acid for the second series. Polyesters were prepared starting from the corresponding dimethyl esters and 1,4-butanediol by melt transesterification in the presence of a highly effective catalyst tetra-n-butyl-titanate, Ti(0Bu4. The molecular structure and composition of the copolyesters was determined by 1H NMR spectroscopy. The effect of copolymer composition on the physical and thermal properties of these random polyesters were investigated using differential scanning calorimetry. The degree of crystallinity was determined by DSC and wide angle X-ray. The degrees of crystallinity of the saturated and unsaturated copolyesters were generally reduced with respect to poly(butylene succinate, PBS. The melting temperatures of the saturated polyesters were lower, while the melting temperatures of the unsaturated copolyesters were higher than the melting temperature of PBS. The biodegradability of the polyesters was investigated by enzymatic degradation tests. The enzymatic degradation tests were performed in a buffer solution with Candida cylindracea lipase and for the unsaturated polyesters with Rhizopus arrhizus lipase. The extent of biodegradation was quantified as the weight loss of polyester films. Also the surface of the polyester films after degradation was observed using optical microscopy. It could be concluded that the biodegradability depended strongly on the degree of crystallinity, but also on the flexibility of the chain backbone. The highest biodegradation was observed for copolyesters containing 50 mol.% of adipic acid units, and in the series of unsaturated polyesters for copolyesters containing 5 and 10 mol.% of fumarate units. Although the degree of crystallinity of the unsaturated polyesters decreased slightly with increasing unsaturation, the biodegradation

  19. Acid etching process for fabrication of Bi2Sr2CaCu2O8+x stack

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jie; CHEN Jian; WU JingBo; KANG Lin; XU WeiWei; WU PeiHeng

    2007-01-01

    We adopted a new method, acid etching process, to fabricate the intrinsic Josephson junctions based on the Bi2Sr2CaCu2O8+x single crystals. By soaking the crystals into the dilute hydrochloric acid, we fabricated a junction stack successfully, and meantime made the surrounding area insulated. A certain concentration of hydrochloric acid was used to maintain the roughness of the modified layer. The current-voltage characteristic was achieved through the four terminal measurement. We could control the junctions' number by changing the concentration and the soaking time. We also found that the thickness of the stack was equal to the average height of the insulation layer. Such a simple, convenient and controllable fabrication method with a high yield might widen the applications of the intrinsic Josephson junctions.

  20. Teaching Acid/Base Physiology in the Laboratory

    Science.gov (United States)

    Friis, Ulla G.; Plovsing, Ronni; Hansen, Klaus; Laursen, Bent G.; Wallstedt, Birgitta

    2010-01-01

    Acid/base homeostasis is one of the most difficult subdisciplines of physiology for medical students to master. A different approach, where theory and practice are linked, might help students develop a deeper understanding of acid/base homeostasis. We therefore set out to develop a laboratory exercise in acid/base physiology that would provide…

  1. Using Willie's Acid-Base Box for Blood Gas Analysis

    Science.gov (United States)

    Dietz, John R.

    2011-01-01

    In this article, the author describes a method developed by Dr. William T. Lipscomb for teaching blood gas analysis of acid-base status and provides three examples using Willie's acid-base box. Willie's acid-base box is constructed using three of the parameters of standard arterial blood gas analysis: (1) pH; (2) bicarbonate; and (3) CO[subscript…

  2. Using Willie's Acid-Base Box for Blood Gas Analysis

    Science.gov (United States)

    Dietz, John R.

    2011-01-01

    In this article, the author describes a method developed by Dr. William T. Lipscomb for teaching blood gas analysis of acid-base status and provides three examples using Willie's acid-base box. Willie's acid-base box is constructed using three of the parameters of standard arterial blood gas analysis: (1) pH; (2) bicarbonate; and (3) CO[subscript…

  3. Assessing College Students' Understanding of Acid Base Chemistry Concepts

    Science.gov (United States)

    Wan, Yanjun Jean

    2014-01-01

    Typically most college curricula include three acid base models: Arrhenius', Bronsted-Lowry's, and Lewis'. Although Lewis' acid base model is generally thought to be the most sophisticated among these three models, and can be further applied in reaction mechanisms, most general chemistry curricula either do not include Lewis' acid base model, or…

  4. Teaching Acid/Base Physiology in the Laboratory

    Science.gov (United States)

    Friis, Ulla G.; Plovsing, Ronni; Hansen, Klaus; Laursen, Bent G.; Wallstedt, Birgitta

    2010-01-01

    Acid/base homeostasis is one of the most difficult subdisciplines of physiology for medical students to master. A different approach, where theory and practice are linked, might help students develop a deeper understanding of acid/base homeostasis. We therefore set out to develop a laboratory exercise in acid/base physiology that would provide…

  5. Installation Restoration Program (IRP) Stage 3. McClellan Air Force Base. Operable Unit B. Preliminary Assessment Summary Report. Volume 3. Appendices C, D & E

    Science.gov (United States)

    1991-10-01

    Types of materials handled: PCBs Acids Bases Radionucleides Specific chemicals handled: ammonium hydroxide hydrochloric acid nitric acid potassium...on the ground at PRL 30, which includes Building 631. Period of operation: 1960 to 1980 Types of materials handled: Radionucleides "Solvents Specific... radionucleides were handled or disposed. The following sites should be considered for radioactivity screening as part of future remedial investigations: o Site

  6. Liquid Crystalline Furandicarboxylic Acid-based Aaromatic Polyesters

    NARCIS (Netherlands)

    WILSENS, CAROLUS HENRICUS R. MARIA; RASTOGI, SANJAY; VELD, MARTIJN ARNOLDUS JOHANNES; KLOP, ENNO ANTON; NOORDOVER, BART ADRIANUS JOHANNES

    2013-01-01

    The invention pertains to a fully aromatic liquid crystalline furandicarboxylic acid- based aromatic polyester obtainable from a mixture of monomers comprising 2,5- furandicarboxylic acid, p-hydroxybenzoic acid, an aromatic diol, and 5-40 mol% of an aromatic monocarboxylic acid selected from vanilli

  7. DILUTE SOLUTION BEHAVIOR OF CHITOSAN IN DIFFERENT ACID SOLVENTS

    Institute of Scientific and Technical Information of China (English)

    WANG Wei; WANG Lihua; QIN Wen

    1994-01-01

    Dilute solution behavior of chitosan was studied in formic acid, acetic acid,lactic acid and hydrochloric acid aqueous solution under different pH values. The reduced viscosities, ηsp/C,of chitosan solutions were dependent on the properties of acid and pH value of solvents. For a given chitosan concentration, ηsp/C decreased with the increase of acid concentration, or decreasing pH of solvent, indicating shielding effect of excessive acid similar to adding salt into solution. The stabilities of dilute chitosan solution in formic acid and lactic acid were better than that in acetic acid and hydrochloric acid.

  8. Bedside Analysis of Acid-Base Balance

    Directory of Open Access Journals (Sweden)

    Yu. S. Podlesskikh

    2006-01-01

    Full Text Available Laboratory service is one of the most hang-the-expense items in the cost of treatment of patients in an intensive care unit. Isolated acid-base balance (ABB impairments are rare in clinical practice. These impairments are generally combined and they frequently cause a drastic change in the pH value of blood. Early detection of their origin and its elimination are of profound importance in these situations. Miniaturization of analyzers has made it possible to conduct some investigations and particularly to determine ABB just in the intensive care unit or operating suite. The attached software permits creation of a database and transmission of information to the laboratory network. One year’s experience has indicated that the quality of reagents and reference substances allows real-time determination of the values of ABB with a high degree of accuracy and reproducibility at a patient’s bed. 

  9. Whole-body acid-base modeling revisited

    DEFF Research Database (Denmark)

    Ring, Troels; Nielsen, Søren

    2017-01-01

    The textbook account of whole-body acid-base balance in terms of endogenous acid production, renal net acid excretion and gastrointestinal alkali absorption which is the only comprehensive model around, has never been applied in clinical practice or been formally validated. In order to improve...... understanding of acid-base modeling, we managed to write up this conventional model as an expression solely on urine chemistry. Renal net acid excretion and endogenous acid production was already formulated in terms of urine chemistry, and we could from the literature also see gastrointestinal alkali absorption...

  10. Acid-base bifunctional catalytic surfaces for nucleophilic addition reactions.

    Science.gov (United States)

    Motokura, Ken; Tada, Mizuki; Iwasawa, Yasuhiro

    2008-09-01

    This article illustrates the modification of oxide surfaces with organic amine functional groups to create acid-base bifunctional catalysts, summarizing our previous reports and also presenting new data. Immobilization of organic amines as bases on inorganic solid-acid surfaces afforded highly active acid-base bifunctional catalysts, which enabled various organic transformations including C--C coupling reactions, though these reactions did not proceed with either the homogeneous amine precursors or the acidic supports alone. Spectroscopic characterization, such as by solid-state MAS NMR and FTIR, revealed not only the interactions between acidic and basic sites but also bifunctional catalytic reaction mechanisms.

  11. Application of hydrochloric cyclopentolate eye drops in the mydriasis test and optometry for children with hyperopia

    Directory of Open Access Journals (Sweden)

    Hong-Ping Yin

    2016-02-01

    Full Text Available AIM:To observe and study the comprehensive application effect of hydrochloric cyclopentolate eye drops in the mydriasis test and optometry for children with hyperopia.METHODS:Eighty-four children with hyperopia who were intervened with mydriasis test and optometry in our hospital from February 2014 to March 2015 were selected as the research object,and they were intervened with mydriasis test and optometry by tropicamide or hydrochloric cyclopentolate eye drops. The diopter, pupil diameter and residual regulation before administration and at different time after administration of the two methods were compared,and the detected results of the two groups with different severity degree were compared too.RESULTS:The diopter, pupil diameter and residual regulation before administration of the two eye drops had no significant differences(all P>0.05,while the residual regulation after using hydrochloric cyclopentolate eye drops at 20, 40, 60min and 24h were all smaller than those after using tropicamide(all PP>0.05. The pupil diameter of the two groups at 48h after administration both had no significant differences to those before administration(all P>0.05.CONCLUSION:The comprehensive application effect of hydrochloric cyclopentolate eye drops in the mydriasis test and optometry of children with hyperopia is better,and its paralysis effect for ciliaris is obvious.

  12. Corrosion Behavior of Nickel Alloys in Wet Hydrofluoric Acid

    Energy Technology Data Exchange (ETDEWEB)

    Rebak, R B

    2004-02-06

    Hydrofluoric acid is a water solution of hydrogen fluoride (HF). Hydrofluoric acid is used widely in diverse types of industrial applications; traditionally, it is used in pickling solutions in the metal industry, in the fabrication of chlorofluorocarbon compounds, as an alkylation agent for gasoline and as an etching agent in the industry of glass. In recent years, hydrofluoric acid has extensively been used in the manufacture of semiconductors and microelectronics during the wet chemical cleaning of silicon wafers. Hydrofluoric acid can be considered a reducing acid and although it is chemically classified as weaker than, for example, sulfuric or hydrochloric acids, it is extremely corrosive. This acid is also particularly toxic and poses greater health hazard than most other acids. The corrosion behavior of metals in hydrofluoric acid has not been as systematic studied in the laboratory as for other common inorganic acids. This is largely because tests using hydrofluoric acid cannot be run in standard equipment and because of the toxic nature of this acid. Moreover, short-term weight loss laboratory corrosion tests in hydrofluoric acid can be frustrating since the results are not as highly reproducible as in the case of other acids such as sulfuric or hydrochloric. One of the reasons is because hydrofluoric acid commonly attacks the coupons used for testing in a non-uniform manner. That is, the corrosive power of this acid is not aimed to uniform thinning but mostly to localized penetration below the skin of the metal in the form of thin cracks, voids, pits, trenches and sometimes intergranular attack. Figure 1 shows the cross section of a coupon of Alloy 600 (N06600) exposed for 336 h to the vapor phase of a solution of 20% HF at 93 C. In cases where internal penetration occurs such as in Figure 1, it may not be recommended to use corrosion rates based on weight loss for material selection.

  13. ACID-BASE INTERACTIONS BETWEEN POLYMERS AND FILLERS

    Institute of Scientific and Technical Information of China (English)

    WANG Qingguo; CHEN Fute; HUANG Yuanfu; ZHOU Qingli

    1987-01-01

    Inverse gas chromatography(IGC) and Fourier-transform infrared (FT-IR) techniques were applied to determining the relative acid-base strength of polymers and coupling agents. The acid-base characteristics of fillers such as CaCO3 could be altered by treatment with different coupling agents. It was shown that some mechanical properties of filled polymers were obviously associated with acid-base interactions between polymers and fillers.

  14. Quinoline based receptor in fluorometric discrimination of carboxylic acids

    Directory of Open Access Journals (Sweden)

    2008-12-01

    Full Text Available Quinoline and naphthalene-based fluororeceptors 1 and 2 have been designed and synthesized for detection of hydroxy carboxylic acids in less polar solvents. The receptor 1 shows monomer emission quenching followed by excimer emission upon hydrogen bond-mediated complexation of carboxylic acids. The excimer emission distinguishes aromatic dicarboxylic acids from aliphatic dicarboxylic acids and even long chain aliphatic dicarboxylic acids from short chain aliphatic dicarboxylic acids. The receptor 1 is found to be selective for citric acid with a strong excimer emission in CHCl3. On the contrary, the receptor 2 exhibited less binding constant value and did not form any excimer upon complexation with the same acids under similar conditions. This established the role of quinoline ring nitrogen in binding with the acids.

  15. Enhanced Acid/Base Catalysis in High Temperature Liquid Water

    Institute of Scientific and Technical Information of China (English)

    Xiu Yang LU; Qi JING; Zhun LI; Lei YUAN; Fei GAO; Xin LIU

    2006-01-01

    Two novel and environmentally benign solvent systems, organic acids-enriched high temperature liquid water (HTLW) and NH3-enriched HTLW, were developed, which can enhance the reaction rate of acid/base-catalyzed organic reactions in HTLW. We investigated the decomposition of fructose in organic acids-enriched HTLW, hydrolysis of cinnamaldehyde and aldol condensation of phenylaldehyde with acetaldehyde in NH3-enriched HTLW. The experimental results demonstrated that organic acids-enriched or NH3-enriched HTLW can greatly accelerate acid/base-catalyzed organic reactions in HTLW.

  16. Recognition of Nucleic Acid Junctions Using Triptycene-Based Molecules

    OpenAIRE

    Barros, Stephanie A.; Chenoweth, David M.

    2014-01-01

    Nucleic acid modulation by small molecules is an essential process across the kingdoms of life. Targeting nucleic acids with small molecules represents a significant challenge at the forefront of chemical biology. Nucleic acid junctions are ubiquitous structural motifs in nature and in designed materials. Herein, we describe a new class of structure specific nucleic acid junction stabilizers based on a triptycene scaffold. Triptycenes provide significant stabilization of DNA and RNA three-way...

  17. Effects of Inorganic acid catalysts on liquefaction of wood In phenol

    Institute of Scientific and Technical Information of China (English)

    Zhang Qiuhui; Zhao Guangjie; Chen Jinpeng

    2006-01-01

    In order to obtain the effects of acid catalysts on wood liquefaction in phenol, we investigated the liquefaction of wood powder from Chinese fir (Cunninghamia lanceolata) and poplar (Triploid Populus tomentosa Carr) in the presence of phenol with the following weak inorganic acids as catalysts: phosphoric acid (85%),sulfuric acid (36%),hydrochloric acid (37%)and oxalic acid (99.5%).Results show that phosphoric acid (85%) and sulfuric acid (36%) are better than the other catalysts.It was found that lower residue ratios can be obtained under defined reaction conditions: phenol/wood ratio is 4,a 10% catalyst based on the weight of phenol,a temperature of 150℃ for 2 h and phosphoric or sulfuric acid.The residue ratios are 3.2% and 4.0%,respectively.

  18. History of medical understanding and misunderstanding of Acid base balance.

    Science.gov (United States)

    Aiken, Christopher Geoffrey Alexander

    2013-09-01

    To establish how controversies in understanding acid base balance arose, the literature on acid base balance was reviewed from 1909, when Henderson described how the neutral reaction of blood is determined by carbonic and organic acids being in equilibrium with an excess of mineral bases over mineral acids. From 1914 to 1930, Van Slyke and others established our acid base principles. They recognised that carbonic acid converts into bicarbonate all non-volatile mineral bases not bound by mineral acids and determined therefore that bicarbonate represents the alkaline reserve of the body and should be a physiological constant. They showed that standard bicarbonate is a good measure of acidosis caused by increased production or decreased elimination of organic acids. However, they recognised that bicarbonate improved low plasma bicarbonate but not high urine acid excretion in diabetic ketoacidosis, and that increasing pCO2 caused chloride to shift into cells raising plasma titratable alkali. Both indicate that minerals influence pH. In 1945 Darrow showed that hyperchloraemic metabolic acidosis in preterm infants fed milk with 5.7 mmol of chloride and 2.0 mmol of sodium per 100 kcal was caused by retention of chloride in excess of sodium. Similar findings were made but not recognised in later studies of metabolic acidosis in preterm infants. Shohl in 1921 and Kildeberg in 1978 presented the theory that carbonic and organic acids are neutralised by mineral base, where mineral base is the excess of mineral cations over anions and organic acid is the difference between mineral base, bicarbonate and protein anion. The degree of metabolic acidosis measured as base excess is determined by deviation in both mineral base and organic acid from normal.

  19. Chip-based sequencing nucleic acids

    Energy Technology Data Exchange (ETDEWEB)

    Beer, Neil Reginald

    2014-08-26

    A system for fast DNA sequencing by amplification of genetic material within microreactors, denaturing, demulsifying, and then sequencing the material, while retaining it in a PCR/sequencing zone by a magnetic field. One embodiment includes sequencing nucleic acids on a microchip that includes a microchannel flow channel in the microchip. The nucleic acids are isolated and hybridized to magnetic nanoparticles or to magnetic polystyrene-coated beads. Microreactor droplets are formed in the microchannel flow channel. The microreactor droplets containing the nucleic acids and the magnetic nanoparticles are retained in a magnetic trap in the microchannel flow channel and sequenced.

  20. Chip-based sequencing nucleic acids

    Science.gov (United States)

    Beer, Neil Reginald

    2014-08-26

    A system for fast DNA sequencing by amplification of genetic material within microreactors, denaturing, demulsifying, and then sequencing the material, while retaining it in a PCR/sequencing zone by a magnetic field. One embodiment includes sequencing nucleic acids on a microchip that includes a microchannel flow channel in the microchip. The nucleic acids are isolated and hybridized to magnetic nanoparticles or to magnetic polystyrene-coated beads. Microreactor droplets are formed in the microchannel flow channel. The microreactor droplets containing the nucleic acids and the magnetic nanoparticles are retained in a magnetic trap in the microchannel flow channel and sequenced.

  1. Ionisation constants of inorganic acids and bases in aqueous solution

    CERN Document Server

    Perrin, D D

    2013-01-01

    Ionisation Constants of Inorganic Acids and Bases in Aqueous Solution, Second Edition provides a compilation of tables that summarize relevant data recorded in the literature up to the end of 1980 for the ionization constants of inorganic acids and bases in aqueous solution. This book includes references to acidity functions for strong acids and bases, as well as details about the formation of polynuclear species. This text then explains the details of each column of the tables, wherein column 1 gives the name of the substance and the negative logarithm of the ionization constant and column 2

  2. A Closer Look at Acid-Base Olfactory Titrations

    Science.gov (United States)

    Neppel, Kerry; Oliver-Hoyo, Maria T.; Queen, Connie; Reed, Nicole

    2005-01-01

    Olfactory titrations using raw onions and eugenol as acid-base indicators are reported. An in-depth investigation on olfactory titrations is presented to include requirements for potential olfactory indicators and protocols for using garlic, onions, and vanillin as acid-base olfactory indicators are tested.

  3. What is the Ultimate Goal in Acid-Base Regulation?

    Science.gov (United States)

    Balakrishnan, Selvakumar; Gopalakrishnan, Maya; Alagesan, Murali; Prakash, E. Sankaranarayanan

    2007-01-01

    It is common to see chapters on acid-base physiology state that the goal of acid-base regulatory mechanisms is to maintain the pH of arterial plasma and not arterial PCO [subscript 2] (Pa[subscript CO[subscript 2

  4. The Roles of Acids and Bases in Enzyme Catalysis

    Science.gov (United States)

    Weiss, Hilton M.

    2007-01-01

    Many organic reactions are catalyzed by strong acids or bases that protonate or deprotonate neutral reactants leading to reactive cations or anions that proceed to products. In enzyme reactions, only weak acids and bases are available to hydrogen bond to reactants and to transfer protons in response to developing charges. Understanding this…

  5. Disorders of Acid-Base Balance: New Perspectives.

    Science.gov (United States)

    Seifter, Julian L; Chang, Hsin-Yun

    2017-01-01

    Disorders of acid-base involve the complex interplay of many organ systems including brain, lungs, kidney, and liver. Compensations for acid-base disturbances within the brain are more complete, while limitations of compensations are more apparent for most systemic disorders. However, some of the limitations on compensations are necessary to survival, in that preservation of oxygenation, energy balance, cognition, electrolyte, and fluid balance are connected mechanistically. This review aims to give new and comprehensive perspective on understanding acid-base balance and identifying associated disorders. All metabolic acid-base disorders can be approached in the context of the relative losses or gains of electrolytes or a change in the anion gap in body fluids. Acid-base and electrolyte balance are connected not only at the cellular level but also in daily clinical practice. Urine chemistry is essential to understanding electrolyte excretion and renal compensations. Many constructs are helpful to understand acid-base, but these models are not mutually exclusive. Electroneutrality and the close interconnection between electrolyte and acid-base balance are important concepts to apply in acid-base diagnoses. All models have complexity and shortcuts that can help in practice. There is no reason to dismiss any of the present constructs, and there is benefit in a combined approach.

  6. A new representation of acid-base disturbances

    NARCIS (Netherlands)

    M. Hekking (Marcel); E.S. Gelsema; J. Lindemans (Jan)

    1994-01-01

    textabstractThe acid-base status of intensive care patients is monitored on the basis of three quantities. The graphical representation which may be of help for the monitoring task is therefore cumbersome. The classical Siggaard-Andersen acid-base chart is such a representation, but it is only suite

  7. The Roles of Acids and Bases in Enzyme Catalysis

    Science.gov (United States)

    Weiss, Hilton M.

    2007-01-01

    Many organic reactions are catalyzed by strong acids or bases that protonate or deprotonate neutral reactants leading to reactive cations or anions that proceed to products. In enzyme reactions, only weak acids and bases are available to hydrogen bond to reactants and to transfer protons in response to developing charges. Understanding this…

  8. Ab initio investigations of the dynamic and thermodynamic properties of atmospherically relevant strong acids

    OpenAIRE

    Partanen, Lauri

    2017-01-01

    Sulfuric and hydrochloric acids participate in several important chemical processes occurring in the atmosphere. Due to its tendency to react with water molecules, sulfuric acid is an important factor in cloud formation and related phenomena. Hydrochloric acid is heavily implicated in stratospheric ozone depletion because of its role as a temporary reservoir for chlorine radicals. In this thesis, the thermodynamics and dynamics of these two acids are investigated. The dynamic part focuse...

  9. Connecting Acids and Bases with Encapsulation... and Chemistry with Nanotechnology

    Science.gov (United States)

    Criswell, Brett

    2007-01-01

    The features and the development of various new acids and bases activity sets that combines chemistry with nanotechnology are being described. These sets lead to the generation of many nanotechnology-based pharmaceuticals for the treatment of various diseases.

  10. Connecting Acids and Bases with Encapsulation... and Chemistry with Nanotechnology

    Science.gov (United States)

    Criswell, Brett

    2007-01-01

    The features and the development of various new acids and bases activity sets that combines chemistry with nanotechnology are being described. These sets lead to the generation of many nanotechnology-based pharmaceuticals for the treatment of various diseases.

  11. Quantification of Lewis acid induced Brønsted acidity of protogenic Lewis bases.

    Science.gov (United States)

    Lathem, A Paige; Heiden, Zachariah M

    2017-05-09

    Proton transfer promoted by the coordination of protogenic Lewis bases to a Lewis acid is a critical step in catalytic transformations. Although the acidification of water upon coordination to a Lewis acid has been known for decades, no attempts have been made to correlate the Brønsted acidity of the coordinated water molecule with Lewis acid strength. To probe this effect, the pKa's (estimated error of 1.3 pKa units) in acetonitrile of ten protogenic Lewis bases coordinated to seven Lewis acids containing Lewis acidities varying 70 kcal mol(-1), were computed. To quantify Lewis acid strength, the ability to transfer a hydride (hydride donor ability) from the respective main group hydride was used. Coordination of a Lewis acid to water increased the acidity of the bound water molecule between 20 and 50 pKa units. A linear correlation exhibiting a 2.6 pKa unit change of the Lewis acid-water adduct per ten kcal mol(-1) change in hydride donor ability of the respective main group hydride was obtained. For the ten protogenic Lewis bases studied, the coordinated protogenic Lewis bases were acidified between 10 and 50 pKa units. On average, a ten kcal mol(-1) change in hydride donor ability of the respective main group hydride resulted in about a 2.8 pKa unit change in the Brønsted acidity of the Lewis acid-Lewis base adducts. Since attempts to computationally investigate the pKa of main group dihydrogen complexes were unsuccessful, experimental determination of the first reported pKa of a main group dihydrogen complex is described. The pKa of H2-B(C6F5)3 was determined to be 5.8 ± 0.2 in acetonitrile.

  12. Hafnium extraction from acidic chloride solutions by Cyanex 923

    Energy Technology Data Exchange (ETDEWEB)

    El-Ammouri, E.; Distin, P.A. [McGill Univ., Montreal (Canada)

    1996-08-01

    Hafnium extraction from hydrochloric acid/lithium chloride solutions into Cyanex 923 in kerosene has been studied. Variables investigated were hydrochloric acid, total chloride and hafnium concentrations in the aqueous phase, and extractant/modifier (isodecanol) levels in the organic phase. Hafnium is considered to load as the tetrachloride complex forming a disolvate with Cyanex 923. Results are compared with equivalent data for zirconium extraction. 14 refs., 7 figs., 2 tabs.

  13. General base-general acid catalysis by terpenoid cyclases.

    Science.gov (United States)

    Pemberton, Travis A; Christianson, David W

    2016-07-01

    Terpenoid cyclases catalyze the most complex reactions in biology, in that more than half of the substrate carbon atoms often undergo changes in bonding during the course of a multistep cyclization cascade that proceeds through multiple carbocation intermediates. Many cyclization mechanisms require stereospecific deprotonation and reprotonation steps, and most cyclization cascades are terminated by deprotonation to yield an olefin product. The first bacterial terpenoid cyclase to yield a crystal structure was pentalenene synthase from Streptomyces exfoliatus UC5319. This cyclase generates the hydrocarbon precursor of the pentalenolactone family of antibiotics. The structures of pentalenene synthase and other terpenoid cyclases reveal predominantly nonpolar active sites typically lacking amino acid side chains capable of serving general base-general acid functions. What chemical species, then, enables the Brønsted acid-base chemistry required in the catalytic mechanisms of these enzymes? The most likely candidate for such general base-general acid chemistry is the co-product inorganic pyrophosphate. Here, we briefly review biological and nonbiological systems in which phosphate and its derivatives serve general base and general acid functions in catalysis. These examples highlight the fact that the Brønsted acid-base activities of phosphate derivatives are comparable to the Brønsted acid-base activities of amino acid side chains.

  14. Carbon-based strong solid acid for cornstarch hydrolysis

    Science.gov (United States)

    Nata, Iryanti Fatyasari; Irawan, Chairul; Mardina, Primata; Lee, Cheng-Kang

    2015-10-01

    Highly sulfonated carbonaceous spheres with diameter of 100-500 nm can be generated by hydrothermal carbonization of glucose in the presence of hydroxyethylsulfonic acid and acrylic acid at 180 °C for 4 h. The acidity of the prepared carbonaceous sphere C4-SO3H can reach 2.10 mmol/g. It was used as a solid acid catalyst for the hydrolysis of cornstarch. Total reducing sugar (TRS) concentration of 19.91 mg/mL could be obtained by hydrolyzing 20 mg/mL cornstarch at 150 °C for 6 h using C4-SO3H as solid acid catalyst. The solid acid catalyst demonstrated good stability that only 9% decrease in TRS concentration was observed after five repeat uses. The as-prepared carbon-based solid acid catalyst can be an environmentally benign replacement for homogeneous catalyst.

  15. Reactive Distillation for Esterification of Bio-based Organic Acids

    Energy Technology Data Exchange (ETDEWEB)

    Fields, Nathan; Miller, Dennis J.; Asthana, Navinchandra S.; Kolah, Aspi K.; Vu, Dung; Lira, Carl T.

    2008-09-23

    The following is the final report of the three year research program to convert organic acids to their ethyl esters using reactive distillation. This report details the complete technical activities of research completed at Michigan State University for the period of October 1, 2003 to September 30, 2006, covering both reactive distillation research and development and the underlying thermodynamic and kinetic data required for successful and rigorous design of reactive distillation esterification processes. Specifically, this project has led to the development of economical, technically viable processes for ethyl lactate, triethyl citrate and diethyl succinate production, and on a larger scale has added to the overall body of knowledge on applying fermentation based organic acids as platform chemicals in the emerging biorefinery. Organic acid esters constitute an attractive class of biorenewable chemicals that are made from corn or other renewable biomass carbohydrate feedstocks and replace analogous petroleum-based compounds, thus lessening U.S. dependence on foreign petroleum and enhancing overall biorefinery viability through production of value-added chemicals in parallel with biofuels production. Further, many of these ester products are candidates for fuel (particularly biodiesel) components, and thus will serve dual roles as both industrial chemicals and fuel enhancers in the emerging bioeconomy. The technical report from MSU is organized around the ethyl esters of four important biorenewables-based acids: lactic acid, citric acid, succinic acid, and propionic acid. Literature background on esterification and reactive distillation has been provided in Section One. Work on lactic acid is covered in Sections Two through Five, citric acid esterification in Sections Six and Seven, succinic acid in Section Eight, and propionic acid in Section Nine. Section Ten covers modeling of ester and organic acid vapor pressure properties using the SPEAD (Step Potential

  16. Effect of benzoic acid supplementation on acid-base status and mineralmetabolism in catheterized growing pigs

    DEFF Research Database (Denmark)

    Nørgaard, Jan Værum; Fernández, José Adalberto; Sørensen, Kristina Ulrich;

    2010-01-01

    Benzoic acid (BA) in diets for growing pigs results in urinary acidification and reduced ammonia emission. The objective was to study the impact of BA supplementation on the acid-base status and mineral metabolism in pigs. Eight female 50-kg pigs, fitted with a catheter in the abdominal aorta, were...

  17. Facile syntheses of dissymmetric ferrocene-functionalized Lewis acids and acid-base pairs.

    Science.gov (United States)

    Morgan, Ian R; Di Paolo, Angela; Vidovic, Dragoslav; Fallis, Ian A; Aldridge, Simon

    2009-12-21

    A facile synthetic approach is reported for the synthesis of dissymmetric 1,2-ferrocenediyl Lewis acids and mixed acid-base pairs including the first example of a 1-phosphino-2-borylferrocene; the use of non-racemic electrophiles allows for the isolation of single diastereomer products.

  18. Polymerization of amino acids containing nucleotide bases

    Science.gov (United States)

    Ben Cheikh, Azzouz; Orgel, Leslie E.

    1990-01-01

    The nucleoamino acids 1-(3'-amino,3'-carboxypropyl)uracil (3) and 9-(3'-amino,3'-carboxypropyl)adenine (4) have been prepared as (L)-en-antiomers and as racemic mixtures. When 3 or 4 is suspended in water and treated with N,N'-carbon-yldiimidazole, peptides are formed in good yield. The products formed from the (L)-enantiomers are hydrolyzed to the monomeric amino acids by pronase. Attempts to improve the efficiency of these oligomerizations by including a polyuridylate template in the reaction mixture were not successful. Similarly, oligomers derived from the (L)-enantiomer of 3 did not act as templates to facilitate the oligomerization of 4.

  19. Carbon-based strong solid acid for cornstarch hydrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Nata, Iryanti Fatyasari, E-mail: yanti_tkunlam@yahoo.com [Chemical Engineering Study Program, Faculty of Engineering, Lambung Mangkurat University, Jl. A. Yani Km. 36 Banjarbaru, South Kalimantan 70714 (Indonesia); Irawan, Chairul; Mardina, Primata [Chemical Engineering Study Program, Faculty of Engineering, Lambung Mangkurat University, Jl. A. Yani Km. 36 Banjarbaru, South Kalimantan 70714 (Indonesia); Lee, Cheng-Kang, E-mail: cklee@mail.ntust.edu.tw [Department of Chemical Engineering, National Taiwan University of Science and Technology, 43 Keelung Rd. Sec.4, Taipei 106, Taiwan (China)

    2015-10-15

    Highly sulfonated carbonaceous spheres with diameter of 100–500 nm can be generated by hydrothermal carbonization of glucose in the presence of hydroxyethylsulfonic acid and acrylic acid at 180 °C for 4 h. The acidity of the prepared carbonaceous sphere C4-SO{sub 3}H can reach 2.10 mmol/g. It was used as a solid acid catalyst for the hydrolysis of cornstarch. Total reducing sugar (TRS) concentration of 19.91 mg/mL could be obtained by hydrolyzing 20 mg/mL cornstarch at 150 °C for 6 h using C4-SO{sub 3}H as solid acid catalyst. The solid acid catalyst demonstrated good stability that only 9% decrease in TRS concentration was observed after five repeat uses. The as-prepared carbon-based solid acid catalyst can be an environmentally benign replacement for homogeneous catalyst. - Highlights: • Carbon solid acid was successfully prepared by one-step hydrothermal carbonization. • The acrylic acid as monomer was effectively reduce the diameter size of particle. • The solid acid catalyst show good catalytic performance of starch hydrolysis. • The solid acid catalyst is not significantly deteriorated after repeated use.

  20. Nucleic Acid--Based Nanodevices in Biological Imaging

    Science.gov (United States)

    Chakraborty, Kasturi; Veetil, Aneesh T.

    2017-01-01

    The nanoscale engineering of nucleic acids has led to exciting molecular technologies for high-end biological imaging. The predictable base pairing, high programmability, and superior new chemical and biological methods used to access nucleic acids with diverse lengths and in high purity, coupled with computational tools for their design, have allowed the creation of a stunning diversity of nucleic acid--based nanodevices. Given their biological origin, such synthetic devices have a tremendous capacity to interface with the biological world, and this capacity lies at the heart of several nucleic acid--based technologies that are finding applications in biological systems. We discuss these diverse applications and emphasize the advantage, in terms of physicochemical properties, that the nucleic acid scaffold brings to these contexts. As our ability to engineer this versatile scaffold increases, its applications in structural, cellular, and organismal biology are clearly poised to massively expand. PMID:27294440

  1. Nucleic Acid-Based Nanodevices in Biological Imaging.

    Science.gov (United States)

    Chakraborty, Kasturi; Veetil, Aneesh T; Jaffrey, Samie R; Krishnan, Yamuna

    2016-06-02

    The nanoscale engineering of nucleic acids has led to exciting molecular technologies for high-end biological imaging. The predictable base pairing, high programmability, and superior new chemical and biological methods used to access nucleic acids with diverse lengths and in high purity, coupled with computational tools for their design, have allowed the creation of a stunning diversity of nucleic acid-based nanodevices. Given their biological origin, such synthetic devices have a tremendous capacity to interface with the biological world, and this capacity lies at the heart of several nucleic acid-based technologies that are finding applications in biological systems. We discuss these diverse applications and emphasize the advantage, in terms of physicochemical properties, that the nucleic acid scaffold brings to these contexts. As our ability to engineer this versatile scaffold increases, its applications in structural, cellular, and organismal biology are clearly poised to massively expand.

  2. Teaching acid/base physiology in the laboratory

    DEFF Research Database (Denmark)

    Friis, Ulla G; Plovsing, Ronni; Hansen, Klaus;

    2010-01-01

    Acid/base homeostasis is one of the most difficult subdisciplines of physiology for medical students to master. A different approach, where theory and practice are linked, might help students develop a deeper understanding of acid/base homeostasis. We therefore set out to develop a laboratory...... exercise in acid/base physiology that would provide students with unambiguous and reproducible data that clearly would illustrate the theory in practice. The laboratory exercise was developed to include both metabolic acidosis and respiratory alkalosis. Data were collected from 56 groups of medical...

  3. Respiratory Acid-Base Disorders in the Critical Care Unit.

    Science.gov (United States)

    Hopper, Kate

    2017-03-01

    The incidence of respiratory acid-base abnormalities in the critical care unit (CCU) is unknown, although respiratory alkalosis is suspected to be common in this population. Abnormal carbon dioxide tension can have many physiologic effects, and changes in Pco2 may have a significant impact on outcome. Monitoring Pco2 in CCU patients is an important aspect of critical patient assessment, and identification of respiratory acid-base abnormalities can be valuable as a diagnostic tool. Treatment of respiratory acid-base disorders is largely focused on resolution of the primary disease, although mechanical ventilation may be indicated in cases with severe respiratory acidosis. Published by Elsevier Inc.

  4. Effect of Ammonium- and Phosphonium-Based Ionic Liquids on the Separation of Lactic Acid by Supported Ionic Liquid Membranes (SILMs).

    Science.gov (United States)

    Matsumoto, Michiaki; Panigrahi, Abhishek; Murakami, Yuuki; Kondo, Kazuo

    2011-05-13

    Biodegradable polymers have attracted much attention from an environmental point of view. Optically pure lactic acid that can be prepared by fermentation is one of the important raw materials for biodegradable polymer. The separation and purification of lactic acid from the fermentation broth are the major portions of the production costs. We proposed the application of supported ionic liquid membranes to recovering lactic acid. In this paper, the effect of ionic liquids, such as Aliquat 336, CYPHOS IL-101, CYPHOS IL-102, CYPHOS IL-104, CYPHOS IL-109 and CYPHOS IL-111 on the lactic acid permeation have been studied. Aliquat 336, CYPHOS IL-101 and CYPHOS IL-102 were found to be the best membrane solvents as far as membrane stability and permeation of lactic acid are concerned. CYPHOS IL-109 and CYPHOS IL-111 were found to be unsuitable, as they leak out from the pores of the supported liquid membrane (SLM), thereby allowing free transport of lactic acid as well as hydrochloric acid. CYPHOS IL-102 was found to be the most adequate (Permeation rate = 60.41%) among these ionic liquids as far as the separation of lactic acid is concerned. The permeation mechanisms, by which ionic liquid-water complexes act as the carrier of lactate and hydrochloric acid, were proposed. The experimental permeation results have been obtained as opposed to the expected values from the solution-diffusion mechanism.

  5. Effect of Ammonium- and Phosphonium-Based Ionic Liquids on the Separation of Lactic Acid by Supported Ionic Liquid Membranes (SILMs

    Directory of Open Access Journals (Sweden)

    Kazuo Kondo

    2011-05-01

    Full Text Available Biodegradable polymers have attracted much attention from an environmental point of view. Optically pure lactic acid that can be prepared by fermentation is one of the important raw materials for biodegradable polymer. The separation and purification of lactic acid from the fermentation broth are the major portions of the production costs. We proposed the application of supported ionic liquid membranes to recovering lactic acid. In this paper, the effect of ionic liquids, such as Aliquat 336, CYPHOS IL-101, CYPHOS IL-102, CYPHOS IL-104, CYPHOS IL-109 and CYPHOS IL-111 on the lactic acid permeation have been studied. Aliquat 336, CYPHOS IL-101 and CYPHOS IL-102 were found to be the best membrane solvents as far as membrane stability and permeation of lactic acid are concerned. CYPHOS IL-109 and CYPHOS IL-111 were found to be unsuitable, as they leak out from the pores of the supported liquid membrane (SLM, thereby allowing free transport of lactic acid as well as hydrochloric acid. CYPHOS IL-102 was found to be the most adequate (Permeation rate = 60.41% among these ionic liquids as far as the separation of lactic acid is concerned. The permeation mechanisms, by which ionic liquid-water complexes act as the carrier of lactate and hydrochloric acid, were proposed. The experimental permeation results have been obtained as opposed to the expected values from the solution-diffusion mechanism.

  6. Environmentally Benign Bifunctional Solid Acid and Base Catalysts

    NARCIS (Netherlands)

    Elmekawy, A.; Shiju, N.R.; Rothenberg, G.; Brown, D.R.

    2014-01-01

    Solid bifunctional acid-​base catalysts were prepd. in two ways on an amorphous silica support: (1) by grafting mercaptopropyl units (followed by oxidn. to propylsulfonic acid) and aminopropyl groups to the silica surface (NH2-​SiO2-​SO3H)​, and (2) by grafting only aminopropyl groups and then parti

  7. Acid-base transport in pancreas-new challenges

    DEFF Research Database (Denmark)

    Novak, Ivana; Haanes, Kristian Agmund; Wang, Jing

    2013-01-01

    Along the gastrointestinal tract a number of epithelia contribute with acid or basic secretions in order to aid digestive processes. The stomach and pancreas are the most extreme examples of acid (H+) and base (HCO-3) transporters, respectively. Nevertheless, they share the same challenges of tra...

  8. Boronic acid-tethered amphiphilic hyaluronic acid derivative-based nanoassemblies for tumor targeting and penetration.

    Science.gov (United States)

    Jeong, Jae Young; Hong, Eun-Hye; Lee, Song Yi; Lee, Jae-Young; Song, Jae-Hyoung; Ko, Seung-Hak; Shim, Jae-Seong; Choe, Sunghwa; Kim, Dae-Duk; Ko, Hyun-Jeong; Cho, Hyun-Jong

    2017-02-16

    (3-Aminomethylphenyl)boronic acid (AMPB)-installed hyaluronic acid-ceramide (HACE)-based nanoparticles (NPs), including manassantin B (MB), were fabricated for tumor-targeted delivery. The amine group of AMPB was conjugated to the carboxylic acid group of hyaluronic acid (HA) via amide bond formation, and synthesis was confirmed by spectroscopic methods. HACE-AMPB/MB NPs with a 239-nm mean diameter, narrow size distribution, negative zeta potential, and >90% drug encapsulation efficiency were fabricated. Exposed AMPB in the outer surface of HACE-AMPB NPs (in the aqueous environment) may react with sialic acid of cancer cells. The improved cellular accumulation efficiency, in vitro antitumor efficacy, and tumor penetration efficiency of HACE-AMPB/MB NPs, compared with HACE/MB NPs, in MDA-MB-231 cells (CD44 receptor-positive human breast adenocarcinoma cells) may be based on the CD44 receptor-mediated endocytosis and phenylboronic acid-sialic acid interaction. Enhanced in vivo tumor targetability, infiltration efficiency, and antitumor efficacies of HACE-AMPB NPs, compared with HACE NPs, were observed in a MDA-MB-231 tumor-xenografted mouse model. In addition to passive tumor targeting (based on an enhanced permeability and retention effect) and active tumor targeting (interaction between HA and CD44 receptor), the phenylboronic acid-sialic acid interaction can play important roles in augmented tumor targeting and penetration of HACE-AMPB NPs. STATEMENT OF SIGNIFICANCE: (3-Aminomethylphenyl)boronic acid (AMPB)-tethered hyaluronic acid-ceramide (HACE)-based nanoparticles (NPs), including manassantin B (MB), were fabricated and their tumor targeting and penetration efficiencies were assessed in MDA-MB-231 (CD44 receptor-positive human adenocarcinoma) tumor models. MB, which exhibited antitumor efficacies via the inhibition of angiogenesis and hypoxia inducible factor (HIF)-1, was entrapped in HACE-AMPB NPs in this study. Phenylboronic acid located in the outer surface

  9. A locked nucleic Acid-based nanocrawler

    DEFF Research Database (Denmark)

    Astakhova, I Kira; Pasternak, Karol; Campbell, Meghan A

    2013-01-01

    Herein we introduce a novel fluorescent LNA/DNA machine, a nanocrawler, which reversibly moves along a directionally polar complementary road controlled by affinity-enhancing locked nucleic acid (LNA) monomers and additional regulatory strands. Polyaromatic hydrocarbon (PAH) dyes attached to 2......'-amino-LNA monomers are incorporated at four stations of the system, enabling simple detection of the position of the nanocrawler via a step-specific color signal. The sensing is provided by highly sensitive, chemically stable, and photostable PAH LNA interstrand communication systems, including pyrene...

  10. Acid-Base Pairs in Lewis Acidic Zeolites Promote Direct Aldol Reactions by Soft Enolization.

    Science.gov (United States)

    Lewis, Jennifer D; Van de Vyver, Stijn; Román-Leshkov, Yuriy

    2015-08-17

    Hf-, Sn-, and Zr-Beta zeolites catalyze the cross-aldol condensation of aromatic aldehydes with acetone under mild reaction conditions with near quantitative yields. NMR studies with isotopically labeled molecules confirm that acid-base pairs in the Si-O-M framework ensemble promote soft enolization through α-proton abstraction. The Lewis acidic zeolites maintain activity in the presence of water and, unlike traditional base catalysts, in acidic solutions. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Renal acidification responses to respiratory acid-base disorders.

    Science.gov (United States)

    Madias, Nicolaos E

    2010-01-01

    Respiratory acid-base disorders are those abnormalities in acid-base equilibrium that are expressed as primary changes in the arterial carbon dioxide tension (PaCO2). An increase in PaCO2 (hypercapnia) acidifies body fluids and initiates the acid-base disturbance known as respiratory acidosis. By contrast, a decrease in PaCO2 (hypocapnia) alkalinizes body fluids and initiates the acid-base disturbance known as respiratory alkalosis. The impact on systemic acidity of these primary changes in PaCO2 is ameliorated by secondary, directional changes in plasma [HCO3¯] that occur in 2 stages. Acutely, hypercapnia or hypocapnia yields relatively small changes in plasma [HCO3¯] that originate virtually exclusively from titration of the body's nonbicarbonate buffers. During sustained hypercapnia or hypocapnia, much larger changes in plasma [HCO3¯] occur that reflect adjustments in renal acidification mechanisms. Consequently, the deviation of systemic acidity from normal is smaller in the chronic forms of these disorders. Here we provide an overview of the renal acidification responses to respiratory acid-base disorders. We also identify gaps in knowledge that require further research.

  12. An Olfactory Indicator for Acid-Base Titrations.

    Science.gov (United States)

    Flair, Mark N.; Setzer, William N.

    1990-01-01

    The use of an olfactory acid-base indicator in titrations for visually impaired students is discussed. Potential olfactory indicators include eugenol, thymol, vanillin, and thiophenol. Titrations performed with each indicator with eugenol proved to be successful. (KR)

  13. Acid-base and potassium disorders in liver disease.

    Science.gov (United States)

    Ahya, Shubhada N; José Soler, Maria; Levitsky, Josh; Batlle, Daniel

    2006-11-01

    Acid-base and potassium disorders occur frequently in the setting of liver disease. As the liver's metabolic function worsens, particularly in the setting of renal dysfunction, hemodynamic compromise, and hepatic encephalopathy, acid-base disorders ensue. The most common acid-base disorder is respiratory alkalosis. Metabolic acidosis alone or in combination with respiratory alkalosis also is common. Acid-base disorders in patients with liver disease are complex. The urine anion gap may help to distinguish between chronic respiratory alkalosis and hyperchloremic metabolic acidosis when a blood gas is not available. A negative urine anion gap helps to rule out chronic respiratory alkalosis. In this disorder a positive urine anion gap is expected owing to suppressed urinary acidification. Distal renal tubular acidosis occurs in autoimmune liver disease such as primary biliary cirrhosis, but often is a functional defect from impaired distal sodium delivery. Potassium disorders are often the result of the therapies used to treat advanced liver disease.

  14. Synthesis and catalytic application of amino acid based dendritic macromolecules

    NARCIS (Netherlands)

    Koten, G. van; Gossage, R.A.; Jastrzebski, J.T.B.H.; Ameijde, J. van; Mulders, S.J.E.; Brouwer, Arwin J.; Liskamp, R.M.J.

    1999-01-01

    The use of amino acid based dendrimers as molecular scaffolds for the attachment of catalytically active organometallic Ni ''pincer'' complexes, via a urea functionality, is described; the dendrimer catalysts have comparable activity to their mononuclear (NCN)NiX analogues.

  15. Acid-base strengths in m-cresol

    NARCIS (Netherlands)

    Bos, M.; Dahmen, E.A.M.F.

    1971-01-01

    For various acids and bases dissociation constants were determined conductimetrically in m-cresol. A glass electrode was calibrated by means of some compounds with dissociation constants known from conductivity measurements. Potentiometric titrations with this calibrated glass electrode gave dissoci

  16. Towards lactic acid bacteria-based biorefineries.

    Science.gov (United States)

    Mazzoli, Roberto; Bosco, Francesca; Mizrahi, Itzhak; Bayer, Edward A; Pessione, Enrica

    2014-11-15

    Lactic acid bacteria (LAB) have long been used in industrial applications mainly as starters for food fermentation or as biocontrol agents or as probiotics. However, LAB possess several characteristics that render them among the most promising candidates for use in future biorefineries in converting plant-derived biomass-either from dedicated crops or from municipal/industrial solid wastes-into biofuels and high value-added products. Lactic acid, their main fermentation product, is an attractive building block extensively used by the chemical industry, owing to the potential for production of polylactides as biodegradable and biocompatible plastic alternative to polymers derived from petrochemicals. LA is but one of many high-value compounds which can be produced by LAB fermentation, which also include biofuels such as ethanol and butanol, biodegradable plastic polymers, exopolysaccharides, antimicrobial agents, health-promoting substances and nutraceuticals. Furthermore, several LAB strains have ascertained probiotic properties, and their biomass can be considered a high-value product. The present contribution aims to provide an extensive overview of the main industrial applications of LAB and future perspectives concerning their utilization in biorefineries. Strategies will be described in detail for developing LAB strains with broader substrate metabolic capacity for fermentation of cheaper biomass.

  17. Simple spectrophotometric method for determination of zirconium or hafnium in selected molybdenum-base alloys.

    Science.gov (United States)

    Dupraw, W A

    1972-06-01

    A simple analytical procedure is described for determining zirconium or hafnium in molybdenum-base alloys by formation of the Arsenazo III complex of zirconium or hafnium in 9 M hydrochloric acid medium. The absorbance is measured at 670 nm. Molybdenum (10 mg), titanium (1 mg), and rhenium (10 mg) have no adverse effect. No prior separation is needed. The relative standard deviation is 1.3-2.7%.

  18. Synthesis and antimicrobial activities of new higher amino acid Schiff base derivatives of 6-aminopenicillanic acid and 7-aminocephalosporanic acid

    Science.gov (United States)

    Özdemir (nee Güngör), Özlem; Gürkan, Perihan; Özçelik, Berrin; Oyardı, Özlem

    2016-02-01

    Novel β-lactam derivatives (1c-3c) (1d-3d) were produced by using 6-aminopenicillanic acid (6-APA), 7-aminocephalosporanic acid (7-ACA) and the higher amino acid Schiff bases. The synthesized compounds were characterized by elemental analysis, IR, 1H/13C NMR and UV-vis spectra. Antibacterial activities of all the higher amino acid Schiff bases (1a-3a) (1b-3b) and β-lactam derivatives were screened against three gram negative bacteria (Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853, Acinetobacter baumannii RSKK 02026), three gram positive bacteria (Staphylococcus aureus ATCC 25923, Enterococcus faecalis ATCC 07005, Bacillus subtilis ATCC 6633) and their drug-resistant isolates by using broth microdilution method. Two fungi (Candida albicans and Candida krusei) were used for antifungal activity.

  19. Acid-base homeostasis in the human system

    Science.gov (United States)

    White, R. J.

    1974-01-01

    Acid-base regulation is a cooperative phenomena in vivo with body fluids, extracellular and intracellular buffers, lungs, and kidneys all playing important roles. The present account is much too brief to be considered a review of present knowledge of these regulatory systems, and should be viewed, instead, as a guide to the elements necessary to construct a simple model of the mutual interactions of the acid-base regulatory systems of the body.

  20. Kislinsko-bazno ravnovesje: Acid-base balance:

    OpenAIRE

    2002-01-01

    Acids are donors, while bases are acceptors of protons in solutions. Many various acids and bases are incorporated into organisms by everyday alimentation and cell metabolism, while the output routes are the respiratory system, kidneys and gastrointestinal system. The concentration of free protonsin the blood (expressed as pH value) is strictly regulated, as it has agreat impact on cell metabolism. There are many ways in which organisms defend themselves against harmful pH changes. The first ...

  1. Speed limits for acid-base chemistry in aqueous solutions.

    Science.gov (United States)

    Donten, Mateusz L; Vandevondele, Joost; Hamm, Peter

    2012-01-01

    Proton transfer reactions, including acid-base recombination, are commonly considered to occur 'nearly instantaneously'. However, their actual time scales may stretch far into the microsecond range, as acid-base reactions are diffusion controlled and the concentrations are low near neutral pH. The interplay of competing bases in the pH relaxation is illustrated using a model acid-base system consisting of o-nitrobenzaldehyde (oNBA) as a proton cage and acetate ions and hydroxyl ions as bases. The kinetically controlled behavior leads to highly counterintuitive states, i.e. acetate ions are transiently protonated for hundreds of nanoseconds despite the presence of a much stronger base OH-.

  2. 46 CFR 151.50-76 - Hydrochloric acid, spent (NTE 15%).

    Science.gov (United States)

    2010-10-01

    ... two fitted flame screens as described in § 151.03-25. Neither a shut-off valve nor a frangible disk... gaskets. (c) Where special arrangements are approved by the Commandant (CG-522) to permit a pump...

  3. Anticoccidial activity of hydrochloric acid (HCl against Eimeria tenella in broiler chickens

    Directory of Open Access Journals (Sweden)

    Rao Z Abbas

    2011-05-01

    Full Text Available The present study was planned to evaluate the anticoccidial activity of the different concentrations of the HCl against Eimeria tenella infection in broiler chickens in comparison with the amprolium anticoccidial. For this purpose, a total of 198 chicks were placed 11 per pen with three pens per treatment. The different concentrations of HCl (1000ppm, 2000ppm and 3000ppm and amproilum (at the dose rate of 125ppm were given to the experimental groups in drinking water from 10 to 19th days of age. One group was kept as infected non medicated control and one as non infected non medicated control. At the 12th day of age, all the groups were inoculated orally with 75,000 sporulated oocysts except non infected non medicated control. Anticoccidial activity was evaluated on the basis of performance (weight gain, feed conversion ratio and pathogenic (oocyst score, lesion score and mortality %age parameters. Among HCl medicated groups, the maximum anticoccidial effect was seen in the group medicated with 1000ppm HCl followed by 2000ppm and 3000ppm HCl medicated groups. Amprolium and 1000ppm HCl were almost equivalent in suppressing the negative performance and pathogenic effects associated with coccidiosis (Eimeria tenella challenge. In summary, the lower doses of HCl have the potential to be used as alternative to chemotherapeutic drugs for Eimeria tenella control. It is therefore suggested that further studies should be carried out to determine the possible minimum safe levels of HCl with least toxic effects to be used as anticoccidial.

  4. Inhibition of Mild Steel Corrosion in Hydrochloric Acid Solution by New Coumarin

    Directory of Open Access Journals (Sweden)

    Abdul Amir H. Kadhum

    2014-06-01

    Full Text Available A new coumarin derivative, N,N′-((2E,2′E-2,2′-(1,4-phenylenebis (methanylylidenebis(hydrazinecarbonothioylbis(2-oxo-2H-chromene-3-carboxamide PMBH, was synthesized and its chemical structure was elucidated and confirmed using spectroscopic techniques (Infrared spectroscopy IR, Proton nuclear  magnetic resonance, 1H-NMR and carbon-13 nuclear magnetic resonance 13C-NMR. The corrosion inhibition effect of PMBH on mild steel in 1.0 M HCl was investigated using corrosion potential (ECORR, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS, and electrochemical frequency modulation (EFM measurements. The obtained results indicated that PMBH has promising inhibitive effects on the corrosion of mild steel in 1.0 M HCl across all of the conditions examined. Scanning electron microscopy (SEM was used to investigate the morphology of the mild steel before and after immersion in 1.0 M HCl solution containing 0.5 mM of PMBH. Surface analysis revealed improvement of corrosion resistance in presence of PMBH.

  5. Punica granatum leave extract as green corrosion inhibitor for mild steel in Hydrochloric acid

    OpenAIRE

    Abboud Y.; Chagraoui A.; Tanane O.; El Bouari A.; Hannache H.

    2013-01-01

    Leave of Punica granatum extract (LPGE) as green inhibitor for the corrosion of mild steel in 1M HCl solution was studied using weight-loss and potentiodynamic polarization measurements. The results obtained revealed that LPGE has fairly good inhibiting properties for mild steel corrosion in 1M HCl solution, with efficiency of around 94 % at a concentration of 1 g/l. The inhibition was of a mixed anodic–cathodic nature. The film which is formed over the metal surface was analysed by FT-IR spe...

  6. Inhibition of copper corrosion in aerated hydrochloric acid solution by heterocyclic compounds containing a mercapto group

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Daquan; Gao Lixin; Zhou Guoding

    2004-12-01

    Inhibition of copper corrosion by benzotriazole (BTA), 2-mercapto benzoxazole (MBO) and 2-mercapto benzimidazole (MBI) in 0.5 mol L{sup -1} HCl was investigated by weight-loss measurements, potentiodynamic polarization curves and electrochemical impedance spectroscopy. MBI was shown to be the most effective inhibitor among those tested. Potentiodynamic polarization results revealed that the three compounds acted as anodic inhibitors, particularly MBI strongly suppressed anodic current densities. Molecular structure parameters of BTA, MBO and MBI were obtained by using an MM2 forcefield program and PPP-SCF quantum chemical calculation. It was found that MBI has higher levels of HOMO and LUMO energy and the larger {pi}-electron density.

  7. Simultaneous Recovery of Hydrogen and Chlorine from Industrial Waste Dilute Hydrochloric Acid

    Directory of Open Access Journals (Sweden)

    N. Paidimarri

    2016-01-01

    Full Text Available Recovery of chlorine from byproduct HCl has inevitable commercial importance in industries lately because of insufficient purity or too low concentration to recycle it. Instead it is being neutralized in industries before disposing to meet stringent environmental conditions. Although recovery through catalytic oxidation processes is studied since the 19th century, their high operating conditions combined with sluggish reaction kinetics and low single pass conversions make electrolysis a better alternative. The present motive of this work is to develop a novel electrolysis process which in contrast to traditional processes effectively recovers both hydrogen and chlorine from dilute HCl. For this, an electrolytic cell with an Anionic Exchange Membrane has been designed which only allows the passage of chlorine anions from catholyte to anolyte separating the gasses in a single step. The catholyte can be as low as 3.59 wt% because of fixed anolyte concentration of 1.99 wt% which minimizes oxygen formation. Preliminary results show that the simultaneous recovery of hydrogen and chlorine is possible with high conversion up to 98%. The maximum current density value for 4.96 cm2 membrane surface area (70% active surface area is 2.54 kAm−2, which is comparable with reported commercial processes. This study is expected to be useful for process intensification of the same in a continuous process environment.

  8. The reduction of l-cystine in hydrochloric acid at mercury drop electrodes

    OpenAIRE

    Ralph, T.R.; Hitchman, M.L.; Millington, J.P.; Walsh, F.C.

    2006-01-01

    The reduction of L-cystine in 0.1 mol dm3 HCl at 298 K has been studied at mercury electrodes. Dropping mercury electrode (DME), static mercury drop electrode (SMDE) and hanging mercury drop electrode (HMDE) modes were used with normal, sampled d.c. and differential pulse polarographic detection. The charge transfer kinetics for the irreversible reduction of L-cystine were complicated by reactant and product adsorption, by the formation of cysteinate complexes between mercury and the product ...

  9. Kinetics of Rare Earth Extraction from Baotou Bastnaesite in Hydrochloric Acid and Aluminum Chloride

    Science.gov (United States)

    Zhang, Xiao-Wei; Li, Mei; Liu, Zhao-Gang; Hu, Yan-Hong; Wang, Mi-Tang

    2017-06-01

    In this paper, the leaching kinetics of rare earth from Baotou bastnaesite in a HCl-AlCl3 solution was investigated. In addition, the effects of the HCl and AlCl3 concentrations, liquid to solid ratio, stirring speed, temperature, and time spent on the rare earth extraction were determined. The results indicated that the extraction was nearly independent of the stirring speed when it did not exceed 300 rpm, and the rate of leaching increased with increases in the HCl and AlCl3 concentrations, liquid to solid ratio, temperature, and time. The optimum dissolution conditions were determined under five experimental conditions. After leaching occurred, the progressive dissolution of the bastnaesite phase could be determined. The leaching kinetics was analyzed with a new variant of the shrinking core model in which both the interfacial transfer and diffusion across the product layer affected the rare earth extraction. The apparent activation energy was 35.57 kJ/mol, and the Arrhenius constant was 341.58 min-1. An empirical equation was derived to describe the extraction process of rare earth minerals.

  10. Electrochemical Study on Newly Synthesized Chlorocurcumin as an Inhibitor for Mild Steel Corrosion in Hydrochloric Acid

    Directory of Open Access Journals (Sweden)

    Ahmed A. Al-Amiery

    2013-11-01

    Full Text Available A new curcumin derivative, i.e., (1E,4Z,6E-5-chloro-1,7-bis(4-hydroxy-3-methoxyphenylhepta-1,4,6-trien-3-one (chlorocurcumin, was prepared starting with the natural compound curcumin. The newly synthesized compound was characterized by elemental analysis and spectral studies (IR, 1H-NMR and 13C-NMR. The corrosion inhibition of mild steel in 1 M HCl by chlorocurcumin has been studied using potentiodynamic polarization (PDP measurements and electrochemical impedance spectroscopy (EIS. The inhibition efficiency increases with the concentration of the inhibitor but decreases with increases in temperature. The potentiodynamic polarization reveals that chlorocurcumin is a mixed-type inhibitor. The kinetic parameters for mild steel corrosion were determined and discussed.

  11. A new online exhaust gas monitoring system in hydrochloric acid regeneration of cold rolling mills.

    Science.gov (United States)

    Tuo, Long; Zheng, Xiang; Chen, Xiong

    2015-07-07

    Measuring the content of hydrogen chloride (HCl) in exhaust gas used to take time and energy. In this paper, we introduce a new online monitoring system which can output real-time data to the monitoring center. The system samples and cools exhaust gas, and after a series of processing, it will be analyzed by a specific instrument. The core part of this system is remote terminal unit (RTU) which is designed on Cortex-A8 embedded architecture. RTU runs a scaled-down version of Linux which is a good choice of OS for embedded applications. It controls the whole processes, does data acquisition and data analysis, and communicates with monitoring center through Ethernet. In addition, through a software developed for windows, the monitoring process can be remotely controlled. The new system is quite beneficial for steel industry to do environment monitoring.

  12. Corrosion Behavior of Ni3(Si,Ti in Hydrochloric Acid Solution

    Directory of Open Access Journals (Sweden)

    Gadang Priyotomo

    2013-06-01

    Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The corrosion behaviour of the intermetallic compounds Ni3(Si,Ti (L12: single phase, has been investigated using an immersion test, electrochemical method, scanning electron microscope in 0.5 kmol/m3 HCl at 303 K. In addition, the corrosion behaviour of austenitic stainless steel type 304 and C276 was studied under the same experimental conditions as references. It was found that the intergranular attack was observed for Ni3(Si,Ti in the immersion test. From the immersion test and polarization curves, Ni3(Si,Ti had the moderate corrosion resistance, while the corrosion resistances of C 276 and type 304 were the highest and the lowest. Ni3(Si,Ti and type 304 were difficult to form a stable passive film, but not for C276. A further experiment must be conducted to clarify the stability of film for Ni3(Si,Ti in detail.

  13. Assessment of acid-base balance. Stewart's approach.

    Science.gov (United States)

    Fores-Novales, B; Diez-Fores, P; Aguilera-Celorrio, L J

    2016-04-01

    The study of acid-base equilibrium, its regulation and its interpretation have been a source of debate since the beginning of 20th century. Most accepted and commonly used analyses are based on pH, a notion first introduced by Sorensen in 1909, and on the Henderson-Hasselbalch equation (1916). Since then new concepts have been development in order to complete and make easier the understanding of acid-base disorders. In the early 1980's Peter Stewart brought the traditional interpretation of acid-base disturbances into question and proposed a new method. This innovative approach seems more suitable for studying acid-base abnormalities in critically ill patients. The aim of this paper is to update acid-base concepts, methods, limitations and applications. Copyright © 2015 Sociedad Española de Anestesiología, Reanimación y Terapéutica del Dolor. Publicado por Elsevier España, S.L.U. All rights reserved.

  14. Role of acids and bases in nanoparticle growth

    Science.gov (United States)

    Yli-Juuti, Taina; Barsanti, Kelley; Bzdek, Bryan; Hildebrandt Ruiz, Lea; Jokinen, Tuija; Kieloaho, Antti-Jussi; Makkonen, Ulla; Petäjä, Tuukka; Ruuskanen, Taina; Johnston, Murray; Kulmala, Markku; Riipinen, Ilona

    2014-05-01

    Secondary aerosol particles that are formed in atmosphere by gas-to-particle conversion during new particle formation events have potential to affect climate significantly due to their typically high number concentrations. This, however, requires that the freshly formed nanoparticles of about 1 nm in diameter grow tens of nanometers and reach climatically relevant sizes, i.e. sizes where they can act as cloud condensation nuclei. During the growth towards larger sizes the nanoparticles are subject to coagulational losses, and the rate at which the nanoparticles grow by condensation of vapors is a key factor affecting their probability to survive to climatically relevant sizes. Vapors that condense on the nanoparticles can be produced in the atmosphere from volatile compounds through gas phase chemical reactions, and their volatility can also be further lowered by particle phase processes. Therefore, particle composition and particle phase processes may influence nanoparticle growth. We study the growth of atmospheric nanoparticles and especially the role of particle phase salt formation in the nanoparticle growth using MABNAG model (Model for Acid-Base chemistry in NAnoparticle Growth) and by comparing to atmospheric measurements. MABNAG is a condensation growth model for aqueous solution particles. In MABNAG the dynamics of gas phase mass transport of vapors to particle are coupled with thermodynamics of particle phase acid-base chemistry, and both the composition and size dependence of equilibrium vapor pressures are accounted for. The model is applied especially for boreal forest environment. Here nanoparticle growth is modeled with a system of water, two acids (sulfuric acid and an organic acid) and two bases (ammonia and an amine) as condensing vapors. Focus is on the neutralization of acids by the bases and the related effects on the particle growth. According to the model predictions the enhancement of condensation of organic acid due to salt formation is

  15. Poly (ricinoleic acid) based novel thermosetting elastomer.

    Science.gov (United States)

    Ebata, Hiroki; Yasuda, Mayumi; Toshima, Kazunobu; Matsumura, Shuichi

    2008-01-01

    A novel bio-based thermosetting elastomer was prepared by the lipase-catalyzed polymerization of methyl ricinoleate with subsequent vulcanization. Some mechanical properties of the cured carbon black-filled polyricinoleate compounds were evaluated as a thermosetting elastomer. It was found that the carbon black-filled polyricinoleate compounds were readily cured by sulfur curatives to produce a thermosetting elastomer that formed a rubber-like sheet with a smooth and non-sticky surface. The curing behaviors and mechanical properties were dependent on both the molecular weight of the polyricinoleate and the amount of the sulfur curatives. Cured compounds consisting of polyricinoleate with a molecular weight of 100,800 showed good mechanical properties, such as a hardness of 48 A based on the durometer A measurements, a tensile strength at break of 6.91 MPa and an elongation at break of 350%.

  16. Acid-base disturbance in patients with cirrhosis

    DEFF Research Database (Denmark)

    Henriksen, Jens H; Bendtsen, Flemming; Møller, Søren

    2015-01-01

    PURPOSE: Acid-base disturbances were investigated in patients with cirrhosis in relation to hemodynamic derangement to analyze the hyperventilatory effects and the metabolic compensation. METHODS: A total of 66 patients with cirrhosis and 44 controls were investigated during a hemodynamic study......, and effects of unidentified ions (all Pacid-base disturbances could not be identified. CONCLUSION: Hypocapnic alkalosis is related to disease severity and hyperdynamic systemic circulation in patients with cirrhosis. The metabolic compensation includes...... alterations in serum albumin and water retention that may result in a delicate acid-base balance in these patients....

  17. Nanopore-based sequencing and detection of nucleic acids.

    Science.gov (United States)

    Ying, Yi-Lun; Zhang, Junji; Gao, Rui; Long, Yi-Tao

    2013-12-09

    Nanopore-based techniques, which mimic the functions of natural ion channels, have attracted increasing attention as unique methods for single-molecule detection. The technology allows the real-time, selective, high-throughput analysis of nucleic acids through both biological and solid-state nanopores. In this Minireview, the background and latest progress in nanopore-based sequencing and detection of nucleic acids are summarized, and light is shed on a novel platform for nanopore-based detection. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Parallel proton transfer pathways in aqueous acid-base reactions

    NARCIS (Netherlands)

    Cox, M.J.; Bakker, H.J.

    2008-01-01

    We study the mechanism of proton transfer (PT) between the photoacid 8-hydroxy-1,3, 6-pyrenetrisulfonic acid (HPTS) and the base chloroacetate in aqueous solution. We investigate both proton and deuteron transfer reactions in solutions with base concentrations ranging from 0.25M to 4M. Using femtose

  19. Soil Studies: Applying Acid-Base Chemistry to Environmental Analysis.

    Science.gov (United States)

    West, Donna M.; Sterling, Donna R.

    2001-01-01

    Laboratory activities for chemistry students focus attention on the use of acid-base chemistry to examine environmental conditions. After using standard laboratory procedures to analyze soil and rainwater samples, students use web-based resources to interpret their findings. Uses CBL probes and graphing calculators to gather and analyze data and…

  20. Soil Studies: Applying Acid-Base Chemistry to Environmental Analysis.

    Science.gov (United States)

    West, Donna M.; Sterling, Donna R.

    2001-01-01

    Laboratory activities for chemistry students focus attention on the use of acid-base chemistry to examine environmental conditions. After using standard laboratory procedures to analyze soil and rainwater samples, students use web-based resources to interpret their findings. Uses CBL probes and graphing calculators to gather and analyze data and…

  1. The coulometric titration of acids and bases in dimethylsulfoxide media

    NARCIS (Netherlands)

    Bos, M.; IJpma, S.T.; Dahmen, E.A.M.F.

    1976-01-01

    The coulometric titration of 20–200 μeq of acids and bases in DMSO media is described. In the titration of bases, the electro-oxidation of hydrogen at a platinized platinum electrode is used as the source of protons. The conditions for 100 % current efficiency at this electrode are low current

  2. A European Acid Rain Program based on the US experience

    DEFF Research Database (Denmark)

    Brandt, U. Steiner; Svendsen, Gert Tinggaard

    2000-01-01

    The paper shows that cost-effective involvement of the source location involves utmost difficulty in practice. Based on the RAINS model, it is recommended that source location should be ignored in a European market for SO2, as is the case in the US Acid Rain Program. Based on the political target...

  3. Hard and soft acids and bases: atoms and atomic ions.

    Science.gov (United States)

    Reed, James L

    2008-07-07

    The structural origin of hard-soft behavior in atomic acids and bases has been explored using a simple orbital model. The Pearson principle of hard and soft acids and bases has been taken to be the defining statement about hard-soft behavior and as a definition of chemical hardness. There are a number of conditions that are imposed on any candidate structure and associated property by the Pearson principle, which have been exploited. The Pearson principle itself has been used to generate a thermodynamically based scale of relative hardness and softness for acids and bases (operational chemical hardness), and a modified Slater model has been used to discern the electronic origin of hard-soft behavior. Whereas chemical hardness is a chemical property of an acid or base and the operational chemical hardness is an experimental measure of it, the absolute hardness is a physical property of an atom or molecule. A critical examination of chemical hardness, which has been based on a more rigorous application of the Pearson principle and the availability of quantitative measures of chemical hardness, suggests that the origin of hard-soft behavior for both acids and bases resides in the relaxation of the electrons not undergoing transfer during the acid-base interaction. Furthermore, the results suggest that the absolute hardness should not be taken as synonymous with chemical hardness but that the relationship is somewhat more complex. Finally, this work provides additional groundwork for a better understanding of chemical hardness that will inform the understanding of hardness in molecules.

  4. Ionic liquid supported acid/base-catalyzed production of biodiesel.

    Science.gov (United States)

    Lapis, Alexandre A M; de Oliveira, Luciane F; Neto, Brenno A D; Dupont, Jairton

    2008-01-01

    The transesterification (alcoholysis) reaction was successfully applied to synthesize biodiesel from vegetable oils using imidazolium-based ionic liquids under multiphase acidic and basic conditions. Under basic conditions, the combination of the ionic liquid 1-n-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMINTf2), alcohols, and K2CO3 (40 mol %) results in the production of biodiesel from soybean oil in high yields (>98%) and purity. H2SO4 immobilized in BMINTf2 efficiently promotes the transesterification reaction of soybean oil and various primary and secondary alcohols. In this multiphase process the acid is almost completely retained in the ionic liquid phase, while the biodiesel forms a separate phase. The recovered ionic liquid containing the acid could be reused at least six times without any significant loss in the biodiesel yield or selectivity. In both catalytic processes (acid and base), the reactions proceed as typical multiphasic systems in which the formed biodiesel accumulates as the upper phase and the glycerol by-product is selectively captured by the alcohol-ionic liquid-acid/base phase. Classical ionic liquids such as 1-n-butyl-3-methylimidazolium tetrafluoroborate and hexafluorophosphate are not stable under these acidic or basic conditions and decompose.

  5. Performance of Different Acids on Sandstone Formations

    Directory of Open Access Journals (Sweden)

    M. A. Zaman

    2013-12-01

    Full Text Available Stimulation of sandstone formations is a challenging task, which involves several chemicals and physical interactions of the acid with the formation. Some of these reactions may result in formation damage. Mud acid has been successfully used to stimulate sandstone reservoirs for a number of years. It is a mixture of hydrofluoric (HF and hydrochloric (HCl acids designed to dissolve clays and siliceous fines accumulated in the near-wellbore region. Matrix acidizing may also be used to increase formation permeability in undamaged wells. The change may be up to 50% to 100% with the mud acid. For any acidizing process, the selection of acid (Formulation and Concentration and the design (Pre-flush, Main Acid, After-flush is very important. Different researchers are using different combinations of acids with different concentrations to get the best results for acidization. Mainly the common practice is combination of Hydrochloric Acid – Hydrofluoric with Concentration (3% HF – 12% HCl. This paper presents the results of a laboratory investigation of Orthophosphoric acid instead of hydrochloric acid in one combination and the second combination is Fluoboric and formic acid and the third one is formic and hydrofluoric acid. The results are compared with the mud acid and the results calculated are porosity, permeability, and FESEM Analysis and Strength tests. All of these new combinations shows that these have the potential to be used as acidizing acids on sandstone formations.

  6. A computational study of ultrafast acid dissociation and acid-base neutralization reactions. I. The model.

    Science.gov (United States)

    Maurer, Patrick; Thomas, Vibin; Rivard, Ugo; Iftimie, Radu

    2010-07-28

    Ultrafast, time-resolved investigations of acid-base neutralization reactions have recently been performed using systems containing the photoacid 8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt (HPTS) and various Bronsted bases. Two conflicting neutralization mechanisms have been formulated by Mohammed et al. [Science 310, 83 (2005)] and Siwick et al. [J. Am. Chem. Soc. 129, 13412 (2007)] for the same acid-base system. Herein an ab initio molecular dynamics based computational model is formulated, which is able to investigate the validity of the proposed mechanisms in the general context of ground-state acid-base neutralization reactions. Our approach consists of using 2,4,6-tricyanophenol (exp. pKa congruent with 1) as a model for excited-state HPTS( *) (pKa congruent with 1.4) and carboxylate ions for the accepting base. We employ our recently proposed dipole-field/quantum mechanics (QM) treatment [P. Maurer and R. Iftimie, J. Chem. Phys. 132, 074112 (2010)] of the proton donor and acceptor molecules. This approach allows one to tune the free energy of neutralization to any desired value as well as model initial nonequilibrium hydration effects caused by a sudden increase in acidity, making it possible to achieve a more realistic comparison with experimental data than could be obtained via a full-QM treatment of the entire system. It is demonstrated that the dipole-field/QM model reproduces correctly key properties of the 2,4,6-tricyanophenol acid molecule including gas-phase proton dissociation energies and dipole moments, and condensed-phase hydration structure and pKa values.

  7. High School Forum: "Invitations to Enquiry": The Calcite/Acid Reaction.

    Science.gov (United States)

    Herron, J. Dudley, Ed.; Driscoll, D. R.

    1979-01-01

    Describes a high school chemistry experiment which involves the reaction between calcite and hydrochloric and sulfuric acids. This reaction can be carried out as a projected demonstration and on an individual basis. (HM)

  8. Deoxyribonucleic acid base compositions of dermatophytes.

    Science.gov (United States)

    Davison, F D; Mackenzie, D W; Owen, R J

    1980-06-01

    DNA was extracted and purified from 55 dermatophyte isolates representing 34 species of Trichophyton, Microsporum and Epidermophyton. The base compositions of the chromosomal DNA were determined by CsCl density gradient centrifugation and were found to be in the narrow range of 48.7 to 50.3 mol % G + C. A satellite DNA component assumed to be of mitochondrial origin was present in most strains, with a G + C content ranging from 14.7 to 30.8 mol % G + C. Heterogeneity in microscopic and colonial characteristics was not reflected in differences in the mean G + C content of the chromosomal DNAs. Strains varied in the G + C contents of satelite DNA, but these did not correlate with traditional species concepts.

  9. New Acid Combination for a Successful Sandstone Acidizing

    Science.gov (United States)

    Shafiq, M. U.; Mahmud, H. K. B.; Rezaee, R.

    2017-05-01

    With the development of new enhanced oil recovery techniques, sandstone acidizing has been introduced and played a pivotal role in the petroleum industry. Different acid combinations have been applied, which react with the formation, dissolve the soluble particles; thus increase the production of hydrocarbons. To solve the problems which occurred using current preflush sandstone acidizing technology (hydrochloric acid); a new acid combination has been developed. Core flooding experiments on sandstone core samples with dimensions 1.5 in. × 3 in. were conducted at a flow rate of 2 cm3/min. A series of hydrochloric-acetic acid mixtures with different ratios were tested under 150°F temperature. The core flooding experiments performed are aimed to dissolve carbonate, sodium, potassium and calcium particles from the core samples. These experiments are followed by few important tests which include, porosity-permeability, pH value, Inductively Coupled Plasma (ICP) analysis and Nuclear Magnetic Resonance (NMR measurements). All the results are compared with the results of conventional hydrochloric acid technology. NMR and porosity analysis concluded that the new acid combination is more effective in creating fresh pore spaces and thus increasing the reservoir permeability. It can be seen from the pore distribution before and after the acidizing. Prior applying acid; the large size of pores appears most frequently in the pore distribution while with the applied acid, it was found that the small pore size is most the predominant of the pore distribution. These results are validated using ICP analysis which shows the effective removal of calcium and other positive ions from the core sample. This study concludes that the combination of acetic-hydrochloric acid can be a potential candidate for the preflush stage of sandstone acidizing at high temperature reservoirs.

  10. Synthesis and characterization of boric acid mediated metal-organic frameworks based on trimesic acid and terephthalic acid

    Science.gov (United States)

    Ozer, Demet; Köse, Dursun A.; Şahin, Onur; Oztas, Nursen Altuntas

    2017-08-01

    The new metal-organic framework materials based on boric acid reported herein. Sodium and boron containing metal-organic frameworks were synthesized by one-pot self-assembly reaction in the presence of trimesic acid and terephthalic acid in water/ethanol solution. Boric acid is a relatively cheap boron source and boric acid mediated metal-organic framework prepared mild conditions compared to the other boron source based metal-organic framework. The synthesized compounds were characterized by FT-IR, p-XRD, TGA/DTA, elemental analysis, 13C-MAS NMR, 11B-NMR and single crystal measurements. The molecular formulas of compounds were estimated as C18H33B2Na5O28 and C8H24B2Na2O17 according to the structural analysis. The obtained complexes were thermally stable. Surface properties of inorganic polymer complexes were investigated by BET analyses and hydrogen storage properties of compound were also calculated.

  11. Acid-base patterns in acute severe asthma.

    Science.gov (United States)

    Raimondi, Guillermo A; Gonzalez, Silvia; Zaltsman, Jorge; Menga, Guillermo; Adrogué, Horacio J

    2013-12-01

    Acid-base status in acute severe asthma (ASA) remains undefined; some studies report complete absence of metabolic acidosis, whereas others describe it as present in one fourth of patients or more. Conclusion discrepancies would therefore appear to derive from differences in assessment methodology. Only a systematic approach centering on patient clinical findings can correctly establish true acid-base disorder prevalence levels. This study examines acid-base patterns in ASA (314 patients), taking into account both natural history of disease and treatment, in patients free of other diseases altering acid-base status. Data were collected from patients admitted for ASA without prior history of chronic bronchitis, emphysema, kidney or liver disease, heart failure, uncontrolled diabetes mellitus or gastrointestinal illness. Informed consent was obtained for all patients, after study protocol approval by the Institutional Review Board. Arterial blood gases, plasma electrolytes, lactate levels, and FEV(1) were measured on arrival. Severe airway obstruction was found with FEV(1) values of 25.6 ± 10.0%, substantial hypoxemia (PaO(2) 66.1 ± 11.9 mmHg) and increased A-a O(2) gradient (39.3 ± 12.3 mmHg) breathing room air. While respiratory alkalosis occurred in patients with better preservation of FEV1, respiratory acidosis was observed with more severe airway obstruction, as was increased lactate in the majority of patients, independent of PaO(2) and PaCO(2) levels. Predominant acid-base patterns observed in ASA in this patient population included primary hypocapnia, or less frequently, primary hypercapnia. Lactic acidosis occurred in 11% of patients and presented consistently as a mixed acid-base disorder. These findings suggest lactic acidosis results from the combined effects of both ASA and medication-related sympathetic effects.

  12. Regulated acid-base transport in the collecting duct.

    Science.gov (United States)

    Wagner, Carsten A; Devuyst, Olivier; Bourgeois, Soline; Mohebbi, Nilufar

    2009-05-01

    The renal collecting system serves the fine-tuning of renal acid-base secretion. Acid-secretory type-A intercalated cells secrete protons via a luminally expressed V-type H(+)-ATPase and generate new bicarbonate released by basolateral chloride/bicarbonate exchangers including the AE1 anion exchanger. Efficient proton secretion depends both on the presence of titratable acids (mainly phosphate) and the concomitant secretion of ammonia being titrated to ammonium. Collecting duct ammonium excretion requires the Rhesus protein RhCG as indicated by recent KO studies. Urinary acid secretion by type-A intercalated cells is strongly regulated by various factors among them acid-base status, angiotensin II and aldosterone, and the Calcium-sensing receptor. Moreover, urinary acidification by H(+)-ATPases is modulated indirectly by the activity of the epithelial sodium channel ENaC. Bicarbonate secretion is achieved by non-type-A intercalated cells characterized by the luminal expression of the chloride/bicarbonate exchanger pendrin. Pendrin activity is driven by H(+)-ATPases and may serve both bicarbonate excretion and chloride reabsorption. The activity and expression of pendrin is regulated by different factors including acid-base status, chloride delivery, and angiotensin II and may play a role in NaCl retention and blood pressure regulation. Finally, the relative abundance of type-A and non-type-A intercalated cells may be tightly regulated. Dysregulation of intercalated cell function or abundance causes various syndromes of distal renal tubular acidosis underlining the importance of these processes for acid-base homeostasis.

  13. Troger's base molecular scaffolds in dicarboxylic acid recognition.

    Science.gov (United States)

    Goswami, S; Ghosh, K; Dasgupta, S

    2000-04-07

    Artificial receptors (1-5) have been designed and synthesized from simple precursors. The chain length selectivity studies of dicarboxylic acids within the cavities of new fluorescent Troger's base molecular frameworks (1-3) have been carried out with a critical examination of their role of rigidity as well as flexibility in selective binding in comparison to receptor 5. The chiral resolution of the racemic Troger's base receptors (1 and 2) by chiral recognition with (+)- camphoric acid using hydrogen-bonding interactions has been studied.

  14. Carbon Dot Based Sensing of Dopamine and Ascorbic Acid

    Directory of Open Access Journals (Sweden)

    Upama Baruah

    2014-01-01

    Full Text Available We demonstrate carbon dot based sensor of catecholamine, namely, dopamine and ascorbic acid. Carbon dots (CDs were prepared from a green source: commercially available Assam tea. The carbon dots prepared from tea had particle sizes of ∼0.8 nm and are fluorescent. Fluorescence of the carbon dots was found to be quenched in the presence of dopamine and ascorbic acid with greater sensitivity for dopamine. The minimum detectable limits were determined to be 33 μM and 98 μM for dopamine and ascorbic acid, respectively. The quenching constants determined from Stern-Volmer plot were determined to be 5 × 10−4 and 1 × 10−4 for dopamine and ascorbic acid, respectively. A probable mechanism of quenching has been discussed in the paper.

  15. Relativistic effects on acidities and basicities of Brønsted acids and bases containing gold.

    Science.gov (United States)

    Koppel, Ilmar A; Burk, Peeter; Kasemets, Kalev; Koppel, Ivar

    2013-11-07

    It is usually believed that relativistic effects as described by the Dirac-Schrödinger equation (relative to the classical or time-independent Schrödinger equation) are of little importance in chemistry. A closer look, however, reveals that some important and widely known properties (e.g., gold is yellow, mercury is liquid at room temperature) stem from relativistic effects. So far the influence of relativistic effects on the acid-base properties has been mostly ignored. Here we show that at least for compounds of gold such omission is completely erroneous and would lead to too high basicity and too low acidity values with errors in the range of 25-55 kcal mol(-1) (or 20 to 44 powers of ten in pK(a) units) in the gas-phase. These findings have important implications for the design of new superstrong acids and bases, and for the understanding of gold-catalysed reactions.

  16. Effect of acids on the teeth and its relevance in postmortem identification

    Directory of Open Access Journals (Sweden)

    Kiran Jadhav

    2009-01-01

    Full Text Available Background: The nature of crime is changing day by day and the forensic scientist is always facing new problems in the process of identification. For example, difficult though it may be to believe, criminals are now-a-days using acids to destroy bodies in order to avoid any personal identification. This is a matter of great interest to the forensic scientist. Is it possible to destroy the human body completely in an acid? If so, are there any means to identify the body? Objectives: The aim of this study was to identify the agent (acid that is most likely to be used in such crimes and to find out if the morphological changes in the teeth could be used to deduce the approximate duration of time elapsed after immersion of a body in an acid. Since the natural teeth are most resistant to destruction they can persist for long after other skeletal structures have been destroyed by physical agents. The objective of study was to observe the morphological changes occurring in natural human teeth when they were kept immersed in an acid solution. Materials and Methods: Teeth were kept in 25 ml of aqueous solutions of three different acids and observed periodically for morphological changes. Results: The results showed that teeth could be completely dissolved in 37% hydrochloric acid (HCl after 15 h of immersion, whereas in 65% nitric acid 20 h was required for complete dissolution. In the case of 96% sulphuric acid, the teeth reacted in a different manner. There was a residual precipitate observed at the bottom of the container after 144 h. It was possible to identify the characteristic morphological changes in the tooth until an advanced stage of degradation. Conclusion: Hydrochloric acid, nitric acid and sulfuric acid cause changes in the teeth and it is possible to deduce the approximate duration for which a body has been immersed in acid based on the charges observed.

  17. A knowledge based advisory system for acid/base titrations in non-aqueous solvents

    NARCIS (Netherlands)

    Bos, M.; Linden, van der W.E.

    1996-01-01

    A computer program was developed that could advice on the choice of solvent and titrant for acid/base titrations in nonaqueous media. It is shown that the feasibility of a titration in a given solvent can be calculated from solvent properties and intrinsic acid/base properties of the sample componen

  18. Design of cinnamaldehyde amino acid Schiff base compounds based on the quantitative structure–activity relationship

    Science.gov (United States)

    Hui Wang; Mingyue Jiang; Shujun Li; Chung-Yun Hse; Chunde Jin; Fangli Sun; Zhuo Li

    2017-01-01

    Cinnamaldehyde amino acid Schiff base (CAAS) is a new class of safe, bioactive compounds which could be developed as potential antifungal agents for fungal infections. To design new cinnamaldehyde amino acid Schiff base compounds with high bioactivity, the quantitative structure–activity relationships (QSARs) for CAAS compounds against Aspergillus niger (A. niger) and...

  19. Acid-base transport in pancreas-new challenges

    DEFF Research Database (Denmark)

    Novak, Ivana; Haanes, Kristian Agmund; Wang, Jing

    2013-01-01

    Along the gastrointestinal tract a number of epithelia contribute with acid or basic secretions in order to aid digestive processes. The stomach and pancreas are the most extreme examples of acid (H+) and base (HCO-3) transporters, respectively. Nevertheless, they share the same challenges...... to consider in pancreas are the proton pumps (H-K-ATPases), as well as the calcium-activated K and Cl channels, such as K3.1 and TMEM16A/ANO1. Local regulators, such as purinergic signaling, fine-tune, and coordinate pancreatic secretion. Lastly, we speculate whether dys-regulation of acid-base transport...... contributes to pancreatic diseases including cystic fibrosis, pancreatitis, and cancer. © 2013 Novak, Haanes and Wang....

  20. Molecular mechanisms of acid-base sensing by the kidney.

    Science.gov (United States)

    Brown, Dennis; Wagner, Carsten A

    2012-05-01

    A major function of the kidney is to collaborate with the respiratory system to maintain systemic acid-base status within limits compatible with normal cell and organ function. It achieves this by regulating the excretion and recovery of bicarbonate (mainly in the proximal tubule) and the secretion of buffered protons (mainly in the distal tubule and collecting duct). How proximal tubular cells and distal professional proton transporting (intercalated) cells sense and respond to changes in pH, bicarbonate, and CO(2) status is a question that has intrigued many generations of renal physiologists. Over the past few years, however, some candidate molecular pH sensors have been identified, including acid/alkali-sensing receptors (GPR4, InsR-RR), kinases (Pyk2, ErbB1/2), pH-sensitive ion channels (ASICs, TASK, ROMK), and the bicarbonate-stimulated adenylyl cyclase (sAC). Some acid-sensing mechanisms in other tissues, such as CAII-PDK2L1 in taste buds, might also have similar roles to play in the kidney. Finally, the function of a variety of additional membrane channels and transporters is altered by pH variations both within and outside the cell, and the expression of several metabolic enzymes are altered by acid-base status in parts of the nephron. Thus, it is possible that a master pH sensor will never be identified. Rather, the kidney seems equipped with a battery of molecules that scan the epithelial cell environment to mount a coordinated physiologic response that maintains acid-base homeostasis. This review collates current knowledge on renal acid-base sensing in the context of a whole organ sensing and response process.

  1. Acid-base metabolism: implications for kidney stones formation.

    Science.gov (United States)

    Hess, Bernhard

    2006-04-01

    The physiology and pathophysiology of renal H+ ion excretion and urinary buffer systems are reviewed. The main focus is on the two major conditions related to acid-base metabolism that cause kidney stone formation, i.e., distal renal tubular acidosis (dRTA) and abnormally low urine pH with subsequent uric acid stone formation. Both the entities can be seen on the background of disturbances of the major urinary buffer system, NH3+ NH4+. On the one hand, reduced distal tubular secretion of H+ ions results in an abnormally high urinary pH and either incomplete or complete dRTA. On the other hand, reduced production/availability of NH4+ is the cause of an abnormally low urinary pH, which predisposes to uric acid stone formation. Most recent research indicates that the latter abnormality may be a renal manifestation of the increasingly prevalent metabolic syndrome. Despite opposite deviations from normal urinary pH values, both the dRTA and uric acid stone formation due to low urinary pH require the same treatment, i.e., alkali. In the dRTA, alkali is needed for improving the body's buffer capacity, whereas the goal of alkali treatment in uric acid stone formers is to increase the urinary pH to 6.2-6.8 in order to minimize uric acid crystallization.

  2. Current chemical concepts of acids and bases and their application to anionic ("acid") and cationic ("basic") dyes.

    Science.gov (United States)

    Puchtler, H; Meloan, S N; Spencer, M

    1985-01-01

    In biomedical studies, dyes are divided into "acid" and "basic" dyes. This classification cannot be reconciled with current chemical definitions of acids and bases. Brönsted-Lowry acids are compounds that can donate protons; bases are proton acceptors. The definition of acids and bases is independent of the electric charge, i.e. acids and bases can be neutral, anionic or cationic. Reactions between acids and bases result in formation of new acid-base pairs. Lewis acids and bases do not depend on a particular element, but are characterized by their electronic configurations. Lewis bases are electron donors; Lewis acids are electron acceptors. This classification is also unrelated to the electric charge. Lewis acids and bases interact by formation of coordinate covalent bonds. In histochemistry and histology, dyes containing -SO3-, -COO- and/or -O- groups are classified as "acid" dyes. However, such compounds are electron pair donors and hence Brönsted-Lowry and Lewis anionic bases. Dyes carrying a positive charge are termed "basic" dyes. Chemically, many cationic dyes are Lewis acids because they can add a base, e.g. OH-, acetate, halides. The hypothesis that transformation of -NH2 into ammonium groups imparts "basic" properties to dyes is untenable; ammonium groups are proton donors and hence acids. Furthermore, conversion of an amino into an ammonium group blocks a lone electron pair and the color of the dye changes drastically, e.g. from violet to green and yellow. It appears therefore highly unlikely that ammonium groups are responsible for binding of cationic ("basic") dyes. In histochemistry, it is usually not of critical importance whether anionic or cationic dyes are chemically acids or bases.(ABSTRACT TRUNCATED AT 250 WORDS)

  3. Interactions between acid- and base-functionalized surfaces

    NARCIS (Netherlands)

    Giesbers, M.; Kleijn, J.M.; Cohen Stuart, M.A.

    2002-01-01

    In this paper we present an AFM force study on interactions between chemically modified surfaces. Surfaces with terminal groups of either NH2 or COOH were obtained by chemisorption of a silane-based compound (3-amino-propyltriethoxysilane) on silica or a thiol compound (11-mercapto undecanoic acid)

  4. Students' Understanding of Acids/Bases in Organic Chemistry Contexts

    Science.gov (United States)

    Cartrette, David P.; Mayo, Provi M.

    2011-01-01

    Understanding key foundational principles is vital to learning chemistry across different contexts. One such foundational principle is the acid/base behavior of molecules. In the general chemistry sequence, the Bronsted-Lowry theory is stressed, because it lends itself well to studying equilibrium and kinetics. However, the Lewis theory of…

  5. Turkish Prospective Chemistry Teachers' Alternative Conceptions about Acids and Bases

    Science.gov (United States)

    Boz, Yezdan

    2009-01-01

    The purpose of this study was to obtain prospective chemistry teachers' conceptions about acids and bases concepts. Thirty-eight prospective chemistry teachers were the participants. Data were collected by means of an open-ended questionnaire and semi-structured interviews. Analysis of data indicated that most prospective teachers did not have…

  6. Asymmetric bipolar membranes in acid-base electrodialysis

    NARCIS (Netherlands)

    Wilhelm, Friedrich G.; Punt, Ineke; Vegt, van der Nico F.A.; Strathmann, H.; Wessling, M.

    2002-01-01

    In this experimental study, the influence of asymmetric bipolar membranes on the salt impurities in the acid and base product is investigated. The thickness of one, the other, or both ion-permeable layers of a bipolar membrane is increased. With increased layer thickness, the current-voltage curves

  7. Acid-Base Disorders--A Computer Simulation.

    Science.gov (United States)

    Maude, David L.

    1985-01-01

    Describes and lists a program for Apple Pascal Version 1.1 which investigates the behavior of the bicarbonate-carbon dioxide buffer system in acid-base disorders. Designed specifically for the preclinical medical student, the program has proven easy to use and enables students to use blood gas parameters to arrive at diagnoses. (DH)

  8. Photoresponsive self-assemblies based on fatty acids.

    Science.gov (United States)

    Fameau, A-L; Arnould, A; Lehmann, M; von Klitzing, R

    2015-02-18

    Photoresponsive surfactant system based on fatty acids has been developed by the introduction in aqueous solution of a photoacid generator (PAG). Self-assembly transitions are triggered by UV irradiation due to a pH change induced by the presence of PAG.

  9. Students' Understanding of Acids/Bases in Organic Chemistry Contexts

    Science.gov (United States)

    Cartrette, David P.; Mayo, Provi M.

    2011-01-01

    Understanding key foundational principles is vital to learning chemistry across different contexts. One such foundational principle is the acid/base behavior of molecules. In the general chemistry sequence, the Bronsted-Lowry theory is stressed, because it lends itself well to studying equilibrium and kinetics. However, the Lewis theory of…

  10. Turkish Prospective Chemistry Teachers' Alternative Conceptions about Acids and Bases

    Science.gov (United States)

    Boz, Yezdan

    2009-01-01

    The purpose of this study was to obtain prospective chemistry teachers' conceptions about acids and bases concepts. Thirty-eight prospective chemistry teachers were the participants. Data were collected by means of an open-ended questionnaire and semi-structured interviews. Analysis of data indicated that most prospective teachers did not have…

  11. Plasmonics-based SERS nanobiosensor for homogeneous nucleic acid detection.

    Science.gov (United States)

    Wang, Hsin-Neng; Fales, Andrew M; Vo-Dinh, Tuan

    2015-05-01

    Developing a simple and efficient nucleic acid detection technology is essential for clinical diagnostics. Here, we describe a new conceptually simple and selective "turn on" plasmonics-based nanobiosensor, which integrates non-enzymatic DNA strand-displacement hybridization for specific nucleic acid target identification with surface-enhanced Raman scattering (SERS) detection. This SERS nanobiosensor is a target label-free, and rapid nanoparticle-based biosensing system using a homogeneous assay format that offers a simple and efficient tool for nucleic acid diagnostics. Our results showed that the nanobiosensor provided a limit of detection of ~0.1nM (200amol) in the current bioassay system, and exhibited high specificity for single nucleotide mismatch discrimination. Surface-enhanced Raman scattering (SERS) is a sensitive technique that enhances Raman scattering by molecules adsorbed on rough metal surfaces. The enhancement means that the technique may even detect single molecules. In this article, the authors describe a simple and efficient nucleic acid detection technology using SERS, with "OFF-to-ON" signal switch upon nucleic acid target identification and capture, which provides high sensitivity and specificity for single nucleotide mismatch discrimination. This new technology will be most welcomed in clinical diagnostics. Copyright © 2015 Elsevier Inc. All rights reserved.

  12. Parallel proton transfer pathways in aqueous acid-base reactions

    OpenAIRE

    Cox, M. J.; Bakker, H.J.

    2008-01-01

    We study the mechanism of proton transfer (PT) between the photoacid 8-hydroxy-1,3, 6-pyrenetrisulfonic acid (HPTS) and the base chloroacetate in aqueous solution. We investigate both proton and deuteron transfer reactions in solutions with base concentrations ranging from 0.25M to 4M. Using femtosecond midinfrared spectroscopy, we probe the vibrational responses of HPTS, its conjugate photobase, the hydrated proton/deuteron, and chloroacetate. The measurement of these four resonances allows ...

  13. Nucleic Acid Base Analog FRET-Pair Facilitating Detailed Structural Measurements in Nucleic Acid Containing Systems

    DEFF Research Database (Denmark)

    Börjesson, Karl; Preus, Søren; El-Sagheer, Afaf

    2009-01-01

    distances covering up to more than one turn of the DNA duplex. Importantly, we show that the rigid stacking of the two base analogs, and consequently excellent control of their exact positions and orientations, results in a high control of the orientation factor and hence very distinct FRET changes...... as the number of bases separating tCO and tC(nitro) is varied. A set of DNA strands containing the FRET-pair at wisely chosen locations will, thus, make it possible to accurately distinguish distance- from orientation-changes using FRET. In combination with the good nucleobase analog properties, this points...... toward detailed studies of the inherent dynamics of nucleic acid structures. Moreover, the placement of FRET-pair chromophores inside the base stack will be a great advantage in studies where other (biomacro)molecules interact with the nucleic acid. Lastly, our study gives possibly the first truly solid...

  14. Model for acid-base chemistry in nanoparticle growth (MABNAG

    Directory of Open Access Journals (Sweden)

    T. Yli-Juuti

    2013-03-01

    Full Text Available Climatic effects of newly-formed atmospheric secondary aerosol particles are to a large extent determined by their condensational growth rates. However, all the vapors condensing on atmospheric nanoparticles and growing them to climatically relevant sizes are not identified yet and the effects of particle phase processes on particle growth rates are poorly known. Besides sulfuric acid, organic compounds are known to contribute significantly to atmospheric nanoparticle growth. In this study a particle growth model MABNAG (Model for Acid-Base chemistry in NAnoparticle Growth was developed to study the effect of salt formation on nanoparticle growth, which has been proposed as a potential mechanism lowering the equilibrium vapor pressures of organic compounds through dissociation in the particle phase and thus preventing their evaporation. MABNAG is a model for monodisperse aqueous particles and it couples dynamics of condensation to particle phase chemistry. Non-zero equilibrium vapor pressures, with both size and composition dependence, are considered for condensation. The model was applied for atmospherically relevant systems with sulfuric acid, one organic acid, ammonia, one amine and water in the gas phase allowed to condense on 3–20 nm particles. The effect of dissociation of the organic acid was found to be small under ambient conditions typical for a boreal forest site, but considerable for base-rich environments (gas phase concentrations of about 1010 cm−3 for the sum of the bases. The contribution of the bases to particle mass decreased as particle size increased, except at very high gas phase concentrations of the bases. The relative importance of amine versus ammonia did not change significantly as a function of particle size. While our results give a reasonable first estimate on the maximum contribution of salt formation to nanoparticle growth, further studies on, e.g. the thermodynamic properties of the atmospheric organics

  15. Acid-base thermochemistry of gaseous oxygen and sulfur substituted amino acids (Ser, Thr, Cys, Met).

    Science.gov (United States)

    Riffet, Vanessa; Frison, Gilles; Bouchoux, Guy

    2011-11-07

    Acid-base thermochemistry of isolated amino acids containing oxygen or sulfur in their side chain (serine, threonine, cysteine and methionine) have been examined by quantum chemical computations. Density functional theory (DFT) was used, with B3LYP, B97-D and M06-2X functionals using the 6-31+G(d,p) basis set for geometry optimizations and the larger 6-311++G(3df,2p) basis set for energy computations. Composite methods CBS-QB3, G3B3, G4MP2 and G4 were applied to large sets of neutral, protonated and deprotonated conformers. Conformational analysis of these species, based on chemical approach and AMOEBA force field calculations, has been used to identify the lowest energy conformers and to estimate the population of conformers expected to be present at thermal equilibrium at 298 K. It is observed that G4, G4MP2, G3B3, CBS-QB3 composite methods and M06-2X DFT lead to similar conformer energies. Thermochemical parameters have been computed using either the most stable conformers or equilibrium populations of conformers. Comparison of experimental and theoretical proton affinities and Δ(acid)H shows that the G4 method provides the better agreement with deviations of less than 1.5 kJ mol(-1). From this point of view, a set of evaluated thermochemical quantities for serine, threonine, cysteine and methionine may be proposed: PA = 912, 919, 903, 938; GB = 878, 886, 870, 899; Δ(acid)H = 1393, 1391, 1396, 1411; Δ(acid)G = 1363, 1362, 1367, 1382 kJ mol(-1). This study also confirms that a non-negligible ΔpS° is associated with protonation of methionine and that the most acidic hydrogen of cysteine in the gas phase is that of the SH group. In several instances new conformers were identified thus suggesting a re-examination of several IRMPD spectra.

  16. Enzymes for fatty acid-based hydrocarbon biosynthesis.

    Science.gov (United States)

    Herman, Nicolaus A; Zhang, Wenjun

    2016-12-01

    Surging energy consumption and environmental concerns have stimulated interest in the production of chemicals and fuels through sustainable and renewable approaches. Fatty acid-based hydrocarbons, such as alkanes and alkenes, are of particular interest to directly replace fossil fuels. Towards this effort, understanding of hydrocarbon-producing enzymes is the first indispensable step to bio-production of hydrocarbons. Here, we review recent advances in the discovery and mechanistic study of enzymes capable of converting fatty acid precursors into hydrocarbons, and provide perspectives on the future of this rapidly growing field. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. Acid-base transport in pancreas – new challenges

    Directory of Open Access Journals (Sweden)

    Ivana eNovak

    2013-12-01

    Full Text Available Along the gastrointestinal tract a number of epithelia contribute with acid or basic secretions in order to aid digestive processes. The stomach and pancreas are the most extreme examples of acid (H+ and base (HCO3- transporters, respectively. Nevertheless, they share the same challenges of transporting acid and bases across epithelia and effectively regulating their intracellular pH. In this review, we will make use of comparative physiology to enlighten the cellular mechanisms of pancreatic HCO3- and fluid secretion, which is still challenging physiologists. Some of the novel transporters to consider in pancreas are the proton pumps (H+-K+-ATPases, as well as the calcium-activated K+ and Cl- channels, such as KCa3.1 and TMEM16A/ANO1. Local regulators, such as purinergic signalling, fine-tune and coordinate pancreatic secretion. Lastly, we speculate whether dys-regulation of acid-base transport contributes to pancreatic diseases including cystic fibrosis, pancreatitis and cancer.

  18. Facile synthesis of improved room temperature gas sensing properties of TiO2 nanostructures: Effect of acid treatment

    CSIR Research Space (South Africa)

    Tshabalala, Zamaswazi P

    2016-03-01

    Full Text Available TiO2 nanoparticles were synthesized via a simple hydrothermal method in a sodium hydroxide (NaOH) aqueous solution and washed with distilled water and different concentrations of hydrochloric acid which acted as the morphological...

  19. [Blood acid-base balance of sportsmen during physical activity].

    Science.gov (United States)

    Petrushova, O P; Mikulyak, N I

    2014-01-01

    The aim of this study was to investigate the acid-base balance parameters in blood of sportsmen by physical activity. Before exercise lactate concentration in blood was normal. Carbon dioxide pressure (рСО2), bicarbonate concentration (НСО3 -), base excess (BE), were increased immediately after physical activity lactate concentration increased, while pH, BE, НСО3 -, рСО2 decreased in capillary blood of sportsmen. These changes show the development of lactate-acidosis which is partly compensated with bicarbonate buffering system and respiratory alkalosis. During postexercise recovery lactate concentration decreased, while рСО2, НСО3 -, BE increased. The results of this study can be used for diagnostics of acid-base disorders and their medical treatment for preservation of sportsmen physical capacity.

  20. Food composition and acid-base balance: alimentary alkali depletion and acid load in herbivores.

    Science.gov (United States)

    Kiwull-Schöne, Heidrun; Kiwull, Peter; Manz, Friedrich; Kalhoff, Hermann

    2008-02-01

    Alkali-enriched diets are recommended for humans to diminish the net acid load of their usual diet. In contrast, herbivores have to deal with a high dietary alkali impact on acid-base balance. Here we explore the role of nutritional alkali in experimentally induced chronic metabolic acidosis. Data were collected from healthy male adult rabbits kept in metabolism cages to obtain 24-h urine and arterial blood samples. Randomized groups consumed rabbit diets ad libitum, providing sufficient energy but variable alkali load. One subgroup (n = 10) received high-alkali food and approximately 15 mEq/kg ammonium chloride (NH4Cl) with its drinking water for 5 d. Another group (n = 14) was fed low-alkali food for 5 d and given approximately 4 mEq/kg NH4Cl daily for the last 2 d. The wide range of alimentary acid-base load was significantly reflected by renal base excretion, but normal acid-base conditions were maintained in the arterial blood. In rabbits fed a high-alkali diet, the excreted alkaline urine (pH(u) > 8.0) typically contained a large amount of precipitated carbonate, whereas in rabbits fed a low-alkali diet, both pH(u) and precipitate decreased considerably. During high-alkali feeding, application of NH4Cl likewise decreased pH(u), but arterial pH was still maintained with no indication of metabolic acidosis. During low-alkali feeding, a comparably small amount of added NH4Cl further lowered pH(u) and was accompanied by a significant systemic metabolic acidosis. We conclude that exhausted renal base-saving function by dietary alkali depletion is a prerequisite for growing susceptibility to NH4Cl-induced chronic metabolic acidosis in the herbivore rabbit.

  1. Research on Direct and Accurate Titration of Strong Acid Strong-Weak Acid Mixture%强酸-弱酸混合体系中准确滴定强酸的研究

    Institute of Scientific and Technical Information of China (English)

    马荔; 张卫; 陈虹锦; 梁竹梅; 谢少艾; 李梅

    2011-01-01

    In order to gain accurately the concentration of the strong acid in strong-weak acid mixture by acid-base titration ,the concentration of the weak acid in the mixture need to be considered at different accuracy demand condition.Based on the analysis of the two sources of the end point error(TE) in the titration process, this article proposed a new method of calculating the end point error in the mixture by acid-base titration. It calculated the concentration range demands of acetate acid and hexamethylenetetramine in hydrochloric acid-acetate acid mixture and hydrochloric acid-hexamethylenetetramine acid mixture respectively at the different appointed TE demands and strong acid concentration ranges. Along with the increasing pH values of change color point of the acid-base indicators, the upper limits of the two weak acid concentrations are decreasing gradually. When the concentrations of acetate acid and hexamethylenetetramine are lower than 1. 18 and 0. 135 mmol/dm3 respectively at the | TE| = 1% demand, the hydrochloric acid content in 0.1 mol/dm3 concentration range can be titrated accurately by using any acidic acid-base indicator. As the concentrations of the two weak acids are lower than 10.6 and 10.5 mmol/dm3 respectively at the same TE demand ,the hydrochloric acid content in 1.0 mol/dm3 concentration range can be titrated accurately by using any acidic acid-base indicator.%为准确滴定出强酸-弱酸混合体系中所含强酸的量,需考虑在不同的准确度要求条件下,混合酸体系中弱酸的浓度范围要求.基于混合酸滴定过程终点误差的2个来源分析,提出了混合酸体系中终点误差(TE)计算的新方法.在指定的终点误差要求和强酸的浓度范围条件下,计算了HCl-HAe、HCl-六次甲基四胺盐两种混合酸体系中HAc、六次甲基四胺盐浓度范围要求,随着各酸碱指示剂变色点pH值的增大,两弱酸浓度的上限要求逐渐减小.在lTEl=1%条件下,当HAc、六次甲

  2. Performance Comparison of New Combinations of Acids with Mud Acid in Sandstone Acidizing

    Directory of Open Access Journals (Sweden)

    Mian Umer Shafiq

    2014-01-01

    Full Text Available The aim of this research is to find the best suitable acid to acidize undamaged low permeable sandstone formation Stimulation of sandstone formations is a challenging task, which involves several chemicals and physical interactions of the acid with the formation. Mud acid has been successfully used to stimulate sandstone reservoirs for a number of years. Matrix acidizing may also be used to increase formation permeability in undamaged wells. The change may be up to 50 to 100% with the mud acid. For any acidizing process, the selection of acid (Formulation and Concentration and the design (Pre-flush, Main Acid, After-flush is very important. Different researchers are using different combinations of acids with different concentrations to get the best results for acidization. Mainly the common practice is combination of Hydrochloric Acid- Hydrofluoric with Concentration (3% HF-12% HCl. This study presents the results of a laboratory investigation of Orthophosphoric acid instead of hydrochloric acid in one combination and the second combination is Fluoboric and formic acid and the third one is formic and hydrofluoric acid. The results are compared with the mud acid and the results analyzed are porosity, permeability, strength, color change and FESEM Analysis. All of these new combinations shows that these have the potential to be used as acidizing acids on sandstone formations.

  3. Hard and soft acids and bases: structure and process.

    Science.gov (United States)

    Reed, James L

    2012-07-05

    Under investigation is the structure and process that gives rise to hard-soft behavior in simple anionic atomic bases. That for simple atomic bases the chemical hardness is expected to be the only extrinsic component of acid-base strength, has been substantiated in the current study. A thermochemically based operational scale of chemical hardness was used to identify the structure within anionic atomic bases that is responsible for chemical hardness. The base's responding electrons have been identified as the structure, and the relaxation that occurs during charge transfer has been identified as the process giving rise to hard-soft behavior. This is in contrast the commonly accepted explanations that attribute hard-soft behavior to varying degrees of electrostatic and covalent contributions to the acid-base interaction. The ability of the atomic ion's responding electrons to cause hard-soft behavior has been assessed by examining the correlation of the estimated relaxation energies of the responding electrons with the operational chemical hardness. It has been demonstrated that the responding electrons are able to give rise to hard-soft behavior in simple anionic bases.

  4. Quartz crystal microbalance and spectroscopy measurements for acid doping in polyaniline films

    Directory of Open Access Journals (Sweden)

    Mohamad M Ayad and Eman A Zaki

    2008-01-01

    Full Text Available We investigated the doping of thin polyaniline (PANI films, prepared by the chemical oxidation of aniline, with different acids. The initial step in the investigation is the preparation of PANI films from aqueous hydrochloric acid solution. This is followed by dedoping with ammonia to obtain a PANI base, which is subsequently doped with strong acids (e.g. hydrochloric, sulfuric, phosphoric and trichloroacetic acids and with a weak acid (acetic acid. The dopant weight fraction (w, which is connected with the gain of mass during the doping of PANI, was determined in situ using a quartz crystal microbalance (QCM. The behavior of PANI upon doping with different anions derived from strong acids indicates that both proton and the anion uptake into the polymer chains occur sharply, rapidly, completely, and reversibly. However the uptake in the case in acetic acid is characterized by slow diffusion. The doping was studied at different concentrations of acetic acid. A second cycle of dedoping–redoping was also performed. The kinetics of the doping reaction is dominated by Fickian diffusion kinetics. The diffusion coefficients (D of the dopant ions into the PANI chains were determined using the QCM and by UV–Vis absorption spectroscopy in the range of (0.076–1.64× 10−15 cm2 s−1. It was found that D in the second cycle of doping is larger than that evaluated from the first cycle of doping for high concentrations of acetic acid. D for the diffusion and for the dopant ion expulsion from the PANI chains was also determined during the redoping process. It was found that D for acetic acid ions in the doping process is larger than that calculated for the dedoping process.

  5. Model for acid-base chemistry in nanoparticle growth (MABNAG)

    Science.gov (United States)

    Yli-Juuti, T.; Barsanti, K.; Hildebrandt Ruiz, L.; Kieloaho, A.-J.; Makkonen, U.; Petäjä, T.; Ruuskanen, T.; Kulmala, M.; Riipinen, I.

    2013-12-01

    Climatic effects of newly-formed atmospheric secondary aerosol particles are to a large extent determined by their condensational growth rates. However, all the vapours condensing on atmospheric nanoparticles and growing them to climatically relevant sizes are not identified yet and the effects of particle phase processes on particle growth rates are poorly known. Besides sulfuric acid, organic compounds are known to contribute significantly to atmospheric nanoparticle growth. In this study a particle growth model MABNAG (Model for Acid-Base chemistry in NAnoparticle Growth) was developed to study the effect of salt formation on nanoparticle growth, which has been proposed as a potential mechanism lowering the equilibrium vapour pressures of organic compounds through dissociation in the particle phase and thus preventing their evaporation. MABNAG is a model for monodisperse aqueous particles and it couples dynamics of condensation to particle phase chemistry. Non-zero equilibrium vapour pressures, with both size and composition dependence, are considered for condensation. The model was applied for atmospherically relevant systems with sulfuric acid, one organic acid, ammonia, one amine and water in the gas phase allowed to condense on 3-20 nm particles. The effect of dissociation of the organic acid was found to be small under ambient conditions typical for a boreal forest site, but considerable for base-rich environments (gas phase concentrations of about 1010 cm-3 for the sum of the bases). The contribution of the bases to particle mass decreased as particle size increased, except at very high gas phase concentrations of the bases. The relative importance of amine versus ammonia did not change significantly as a function of particle size. While our results give a reasonable first estimate on the maximum contribution of salt formation to nanoparticle growth, further studies on, e.g. the thermodynamic properties of the atmospheric organics, concentrations of low

  6. Influence of the use of acids and films in post-harvest lychee conservation

    Directory of Open Access Journals (Sweden)

    Danielle Fabíola Pereira da Silva

    2012-12-01

    Full Text Available Lychee (Litchi chinensis Sonn. has a high commercial value; however, it has a short shelf-life because of its rapid pericarp browning. The objective of this study was to evaluate the shelf-life of 'Bengal' lychee fruits stored after treatment with hydrochloric acid and citric acid, associated with cassava starch and plastic packaging. Uniformly red pericarp fruits were submitted to treatments: 1-(immersion in citric acid 100 mM for 5 minutes + cassava starch 30 g L-1 for 5 minutes, 2-(immersion in hydrochloric acid 1 M for 2 minutes + starch cassava 30 g L-1 for 5 minutes, 3-(immersion in citric acid 100 mM for 5 minutes + polyvinyl chloride film (PVC, 14 µm thick and 4-(immersion in hydrochloric acid 1 M for 2 minutes + PVC film. During 20 days, the fruits were evaluated for mass loss, pericarp color, pH, soluble solids and titratable acidity, vitamin C of the pulp and pericarp and activities of polyphenol oxidase and peroxidase of the pericarp. The treatment with hydrochloric acid associated with PVC was the most effective in maintaining the red color of the pericarp for a period of 20 days and best preservation of the fruit. The cassava starch associated with citric acid, and hydrochloric acid did not reduce the mass loss and did not prevent the browning of lychee fruit pericarp.

  7. Bio-based production of organic acids with Corynebacterium glutamicum.

    Science.gov (United States)

    Wieschalka, Stefan; Blombach, Bastian; Bott, Michael; Eikmanns, Bernhard J

    2013-03-01

    The shortage of oil resources, the steadily rising oil prices and the impact of its use on the environment evokes an increasing political, industrial and technical interest for development of safe and efficient processes for the production of chemicals from renewable biomass. Thus, microbial fermentation of renewable feedstocks found its way in white biotechnology, complementing more and more traditional crude oil-based chemical processes. Rational strain design of appropriate microorganisms has become possible due to steadily increasing knowledge on metabolism and pathway regulation of industrially relevant organisms and, aside from process engineering and optimization, has an outstanding impact on improving the performance of such hosts. Corynebacterium glutamicum is well known as workhorse for the industrial production of numerous amino acids. However, recent studies also explored the usefulness of this organism for the production of several organic acids and great efforts have been made for improvement of the performance. This review summarizes the current knowledge and recent achievements on metabolic engineering approaches to tailor C. glutamicum for the bio-based production of organic acids. We focus here on the fermentative production of pyruvate, L- and D-lactate, 2-ketoisovalerate, 2-ketoglutarate, and succinate. These organic acids represent a class of compounds with manifold application ranges, e.g. in pharmaceutical and cosmetics industry, as food additives, and economically very interesting, as precursors for a variety of bulk chemicals and commercially important polymers.

  8. Acid-base properties of Baltic Sea dissolved organic matter

    Science.gov (United States)

    Hammer, Karoline; Schneider, Bernd; Kuliński, Karol; Schulz-Bull, Detlef E.

    2017-09-01

    Calculations related to the marine CO2 system that are based on alkalinity data may be strongly biased if the contributions of organic compounds are ignored. In coastal seas, concentrations of dissolved organic matter (DOM) are frequently high and alkalinity from inorganic compounds is low. In this study, based on measurements of total alkalinity, total CO2, and pH, we determined the organic alkalinity, Aorg, in water from the central Baltic Sea. The maximum Aorg measured in the surface mixed layer during the spring bloom was > 50 μmol/kg-SW but the Aorg decreased with depth and approached zero below the permanent halocline. This behavior could be attributed to the decreased pH of deeper water layers. The data were used to calculate the bulk dissociation constant, KDOM, for marine DOM and the fraction f of dissolved organic carbon (DOC) that acts as a carrier for acid-base functional groups. The p KDOM (7.27) agreed well with the value (7.34) previously estimated in a preliminary study of organic alkalinity in the Baltic Sea. The fraction of carbon atoms carrying acid-base groups was 17% and was somewhat higher than previously reported (12%). Spike experiments performed using artificial seawater and three different humic/fulvic substances tested whether the acid-base properties of these substances explain the results of our field study. Specifically, Aorg was determined at different concentrations (DOC) of the added humic/fulvic substances. The relationship between Aorg and the DOC concentrations indicated that humic/fulvic substances are more acidic (p KDOM < 6.5) than the bulk DOC natural occurring in the Baltic Sea.

  9. Developing nucleic acid-based electrical detection systems

    Directory of Open Access Journals (Sweden)

    Gabig-Ciminska Magdalena

    2006-03-01

    Full Text Available Abstract Development of nucleic acid-based detection systems is the main focus of many research groups and high technology companies. The enormous work done in this field is particularly due to the broad versatility and variety of these sensing devices. From optical to electrical systems, from label-dependent to label-free approaches, from single to multi-analyte and array formats, this wide range of possibilities makes the research field very diversified and competitive. New challenges and requirements for an ideal detector suitable for nucleic acid analysis include high sensitivity and high specificity protocol that can be completed in a relatively short time offering at the same time low detection limit. Moreover, systems that can be miniaturized and automated present a significant advantage over conventional technology, especially if detection is needed in the field. Electrical system technology for nucleic acid-based detection is an enabling mode for making miniaturized to micro- and nanometer scale bio-monitoring devices via the fusion of modern micro- and nanofabrication technology and molecular biotechnology. The electrical biosensors that rely on the conversion of the Watson-Crick base-pair recognition event into a useful electrical signal are advancing rapidly, and recently are receiving much attention as a valuable tool for microbial pathogen detection. Pathogens may pose a serious threat to humans, animal and plants, thus their detection and analysis is a significant element of public health. Although different conventional methods for detection of pathogenic microorganisms and their toxins exist and are currently being applied, improvements of molecular-based detection methodologies have changed these traditional detection techniques and introduced a new era of rapid, miniaturized and automated electrical chip detection technologies into pathogen identification sector. In this review some developments and current directions in

  10. Method for determination of uranium isotopes in environmental samples by liquid-liquid extraction with triisooctylamine/xylene in hydrochloric media and alpha spectrometry.

    Science.gov (United States)

    Popov, L

    2012-10-01

    Alternative method for determination of uranium isotopes in various environmental samples is presented. The method is based on total decomposition of the solid materials and preconcentration of liquid samples. The separation of uranium from interfering radionuclides and stable matrix elements is attained by liquid-liquid extraction with triisooctylamine/xylene in hydrochloric media. After the additional removal of stable iron by extraction with diisopropyl ether, purified uranium is electrodeposited on stainless steel disks and measured by alpha spectrometry. The analytical method has been successfully applied to the determination of uranium isotopes in water and bottom sediments from the rivers Danube, Ogosta and Tzibritza in Northwestern Bulgaria. The analytical quality was checked by analyzing reference materials with different matrices.

  11. Acid and base stress and transcriptomic responses in Bacillus subtilis.

    Science.gov (United States)

    Wilks, Jessica C; Kitko, Ryan D; Cleeton, Sarah H; Lee, Grace E; Ugwu, Chinagozi S; Jones, Brian D; BonDurant, Sandra S; Slonczewski, Joan L

    2009-02-01

    Acid and base environmental stress responses were investigated in Bacillus subtilis. B. subtilis AG174 cultures in buffered potassium-modified Luria broth were switched from pH 8.5 to pH 6.0 and recovered growth rapidly, whereas cultures switched from pH 6.0 to pH 8.5 showed a long lag time. Log-phase cultures at pH 6.0 survived 60 to 100% at pH 4.5, whereas cells grown at pH 7.0 survived acid or base induced adaptation to a more extreme acid or base, respectively. Expression indices from Affymetrix chip hybridization were obtained for 4,095 protein-encoding open reading frames of B. subtilis grown at external pH 6, pH 7, and pH 9. Growth at pH 6 upregulated acetoin production (alsDS), dehydrogenases (adhA, ald, fdhD, and gabD), and decarboxylases (psd and speA). Acid upregulated malate metabolism (maeN), metal export (czcDO and cadA), oxidative stress (catalase katA; OYE family namA), and the SigX extracytoplasmic stress regulon. Growth at pH 9 upregulated arginine catabolism (roc), which generates organic acids, glutamate synthase (gltAB), polyamine acetylation and transport (blt), the K(+)/H(+) antiporter (yhaTU), and cytochrome oxidoreductases (cyd, ctaACE, and qcrC). The SigH, SigL, and SigW regulons were upregulated at high pH. Overall, greater genetic adaptation was seen at pH 9 than at pH 6, which may explain the lag time required for growth shift to high pH. Low external pH favored dehydrogenases and decarboxylases that may consume acids and generate basic amines, whereas high external pH favored catabolism-generating acids.

  12. Acid-base properties of bentonite rocks with different origins.

    Science.gov (United States)

    Nagy, Noémi M; Kónya, József

    2006-03-01

    Five bentonite samples (35-47% montmorillonite) from a Sarmatian sediment series with bentonite sites around Sajóbábony (Hungary) is studied. Some of these samples were tuffogenic bentonite (sedimentary), the others were bentonitized tuff with volcano sedimentary origin. The acid-base properties of the edge sites were studied by potentiometric titrations and surface complexation modeling. It was found that the number and the ratio of silanol and aluminol sites as well as the intrinsic stability constants are different for the sedimentary bentonite and bentonitized tuff. The characteristic properties of the edges sites depend on the origins. The acid-base properties are compared to other commercial and standard bentonites.

  13. Acid-base thermochemistry of gaseous aliphatic α-aminoacids.

    Science.gov (United States)

    Bouchoux, Guy; Huang, Sihua; Inda, Bhawani Singh

    2011-01-14

    Acid-base thermochemistry of isolated aliphatic amino acids (denoted AAA): glycine, alanine, valine, leucine, isoleucine and proline has been examined theoretically by quantum chemical computations at the G3MP2B3 level. Conformational analysis on neutral, protonated and deprotonated species has been used to identify the lowest energy conformers and to estimate the population of conformers expected to be present at thermal equilibrium at 298 K. Comparison of the G3MP2B3 theoretical proton affinities, PA, and ΔH(acid) with experimental results is shown to be correct if experimental thermochemistry is re-evaluated and adapted to the most recent acidity-basicity scales. From this point of view, a set of evaluated proton affinities of 887, 902, 915, 916, 919 and 941 kJ mol(-1), and a set of evaluated ΔH(acid) of 1433, 1430, 1423, 1423, 1422 and 1426 kJ mol(-1), is proposed for glycine, alanine, valine, leucine, isoleucine and proline, respectively. Correlations with structural parameters (Taft's σ(α) polarizability parameter and molecular size) suggest that polarizability of the side chain is the major origin of the increase in PA and decrease in ΔH(acid) along the homologous series glycine, alanine, valine and leucine/isoleucine. Heats of formation of gaseous species AAA, AAAH(+) and [AAA-H](-) were computed at the G3MP2B3 level. The present study provides previously unavailable Δ(f)H°(298) for the ionized species AAAH(+) and [AAA-H](-). Comparison with Benson's estimate, and correlation with molecular size, show that several experimental Δ(f)H°(298) values of neutral or gaseous AAA might be erroneous.

  14. Pathophysiological aspect of metabolic acid-base disorders

    Directory of Open Access Journals (Sweden)

    Nešović-Ostojić Jelena

    2016-01-01

    Full Text Available Maintaing the arterial pH values (in normal range of 7,35-7,45 is one of the main principles of homeostasis. Regulatory responses, including chemical buffering (extracellular, intracellular, sceletal, the regulation of pCO2 by the respiratory system, and the regulation of [HCO3-] by the kidneys, act in concert to maintain normal arterial pH value. The main extracellular chemical buffer is bicarbonate-carbonic acid buffer system. The kidneys contribute to the regulation of hydrogen (and bicarbonate in body fluids in two ways. Proximal tubules are important in bicarbonate reabsorption and distal tubules excrete hydrogen ion (as ammonium ion or titratable acid. There are four simple acid-base disorders: metabolic acidosis and metabolic alkalosis; respiratory acidosis and respiratory alkalosis. Metabolic acidosis can occur because of an increase in endogenous acid production (such as lactate and ketoacids, loss of bicarbonate (as in diarrhea, or accumulation of endogenous acids (as in renal failure. Metabolic acidosis can also be with high and normal (hyperchloremic metabolic acidosis anion gap. Renal tubular acidosis (RTA is a form of hyperchloremic metabolic acidosis which occurs when the renal damage primarily affects tubular function. The main problem in distal RTA is reduced H+ excretion in distal tubule. Type 2 RTA is also called proximal RTA because the main problem is greatly impaired reabsorption of bicarbonate in proximal tubule. Impaired cation exchange in distal tubule is the main problem in RTA type 4. Metabolic alkalosis occurs as a result of net gain of [HCO3-] or loss of nonvolatile acid from extracellular fluids. Metabolic alkalosis can be associated with reduced or increased extracellular volume.

  15. Developing nucleic acid-based electrical detection systems

    OpenAIRE

    Gabig-Ciminska Magdalena

    2006-01-01

    Abstract Development of nucleic acid-based detection systems is the main focus of many research groups and high technology companies. The enormous work done in this field is particularly due to the broad versatility and variety of these sensing devices. From optical to electrical systems, from label-dependent to label-free approaches, from single to multi-analyte and array formats, this wide range of possibilities makes the research field very diversified and competitive. New challenges and r...

  16. Effects of acid-base imbalance on vascular reactivity

    Directory of Open Access Journals (Sweden)

    A.C. Celotto

    2008-06-01

    Full Text Available Acid-base homeostasis maintains systemic arterial pH within a narrow range. Whereas the normal range of pH for clinical laboratories is 7.35-7.45, in vivo pH is maintained within a much narrower range. In clinical and experimental settings, blood pH can vary in response to respiratory or renal impairment. This altered pH promotes changes in vascular smooth muscle tone with impact on circulation and blood pressure control. Changes in pH can be divided into those occurring in the extracellular space (pHo and those occurring within the intracellular space (pHi, although, extracellular and intracellular compartments influence each other. Consistent with the multiple events involved in the changes in tone produced by altered pHo, including type of vascular bed, several factors and mechanisms, in addition to hydrogen ion concentration, have been suggested to be involved. The scientific literature has many reports concerning acid-base balance and endothelium function, but these concepts are not clear about acid-base disorders and their relations with the three known mechanisms of endothelium-dependent vascular reactivity: nitric oxide (NO/cGMP-dependent, prostacyclin (PGI2/cAMP-dependent and hyperpolarization. During the last decades, many studies have been published and have given rise to confronting data on acid-base disorder and endothelial function. Therefore, the main proposal of this review is to provide a critical analysis of the state of art and incentivate researchers to develop more studies about these issues.

  17. A fully automatic system for acid-base coulometric titrations

    OpenAIRE

    1990-01-01

    An automatic system for acid-base titrations by electrogeneration of H+ and OH- ions, with potentiometric end-point detection, was developed. The system includes a PC-compatible computer for instrumental control, data acquisition and processing, which allows up to 13 samples to be analysed sequentially with no human intervention. The system performance was tested on the titration of standard solutions, which it carried out with low errors and RSD. It was subsequently applied to the analysis o...

  18. [Acid-base status in patients treated with peritoneal dialysis].

    Science.gov (United States)

    Katalinić, Lea; Blaslov, Kristina; Pasini, Eva; Kes, Petar; Bašić-Jukić, Nikolina

    2014-04-01

    When compared to hemodialysis, peritoneal dialysis is very simple yet low cost method of renal replacement therapy. Series of studies have shown its superiority in preserving residual renal function, postponing uremic complications, maintaining the acid-base balance and achieving better post-transplant outcome in patients treated with this method. Despite obvious advantages, its role in the treatment of chronic kidney disease is still not as important as it should be. Metabolic acidosis is an inevitable complication associated with progressive loss of kidney function. Its impact on mineral and muscle metabolism, residual renal function, allograft function and anemia is very complex but can be successfully managed. The aim of our study was to evaluate the efficiency in preserving the acid-base balance in patients undergoing peritoneal dialysis at Zagreb University Hospital Center. Twenty-eight patients were enrolled in the study. The mean time spent on the treatment was 32.39 ± 43.43 months. Only lactate-buffered peritoneal dialysis fluids were used in the treatment. Acid-base balance was completely maintained in 73.07% of patients; 11.54% of patients were found in the state of mild metabolic acidosis, and the same percentage of patients were in the state of mild metabolic alkalosis. In one patient, mixed alkalosis with respiratory and metabolic component was present. The results of this study showed that acid-base balance could be maintained successfully in patients undergoing peritoneal dialysis, even only with lactate-buffered solutions included in the treatment, although they were continuously proclaimed as inferior in comparison with bicarbonate-buffered ones. In well educated and informed patients who carefully use this method, accompanied by the attentive and thorough care of their physicians, this method can provide quality continuous replacement of lost renal function as well as better quality of life.

  19. [Injuries caused by acids and bases - emergency treatment].

    Science.gov (United States)

    Reifferscheid, Florian; Stuhr, Markus; Kaiser, Guido; Freudenberg, Matthias; Kerner, Thoralf

    2014-06-01

    Emergency medical care for injuries caused by acids and bases is challenging for rescue services. They have to deal with operational safety, detection of the toxic agent, emergency medical care of the patient and handling of the rescue mission. Because of the rareness of such situations experience and routine are largely missing. This article highlights some basic points for the therapy and provides support for such rescue missions. © Georg Thieme Verlag Stuttgart · New York.

  20. Developing nucleic acid-based electrical detection systems

    OpenAIRE

    Gabig-Ciminska Magdalena

    2006-01-01

    Abstract Development of nucleic acid-based detection systems is the main focus of many research groups and high technology companies. The enormous work done in this field is particularly due to the broad versatility and variety of these sensing devices. From optical to electrical systems, from label-dependent to label-free approaches, from single to multi-analyte and array formats, this wide range of possibilities makes the research field very diversified and competitive. New challenges and r...

  1. An Alternative to Synthetic Acid Base Indicator-Tagetes Erecta Linn

    Directory of Open Access Journals (Sweden)

    *A. Elumalai

    2012-06-01

    Full Text Available The present work highlights the use of the methanolic extract of the flowers of Tagetes erecta as an acid-base indicator in acid-base titrations. This natural indicator is easy to extract as well as easily available. Indicators used in titration show well marked changes of colour in certain intervals of pH. Most of these indicators are organic dyes and are of synthetic origin. Today synthetic indicators are the choice of acid-base titrations. But due to environmental pollution, availability and cost, the search for natural compounds as an acid-base indicator was started. Herbal indicators are evaluated by using strong acid-strong base, strong acid-weak base, weak acid-strong base and weak acid weak base. In all these titrations the methanolic extract of the flowers of Tagetes erecta was found to be very useful, economical, simple and accurate for acid base titration.

  2. Carbonic anhydrase 5 regulates acid-base homeostasis in zebrafish.

    Directory of Open Access Journals (Sweden)

    Ruben Postel

    Full Text Available The regulation of the acid-base balance in cells is essential for proper cellular homeostasis. Disturbed acid-base balance directly affects cellular physiology, which often results in various pathological conditions. In every living organism, the protein family of carbonic anhydrases regulate a broad variety of homeostatic processes. Here we describe the identification, mapping and cloning of a zebrafish carbonic anhydrase 5 (ca5 mutation, collapse of fins (cof, which causes initially a collapse of the medial fins followed by necrosis and rapid degeneration of the embryo. These phenotypical characteristics can be mimicked in wild-type embryos by acetazolamide treatment, suggesting that CA5 activity in zebrafish is essential for a proper development. In addition we show that CA5 regulates acid-base balance during embryonic development, since lowering the pH can compensate for the loss of CA5 activity. Identification of selective modulators of CA5 activity could have a major impact on the development of new therapeutics involved in the treatment of a variety of disorders.

  3. Neurologic complications of electrolyte disturbances and acid-base balance.

    Science.gov (United States)

    Espay, Alberto J

    2014-01-01

    Electrolyte and acid-base disturbances are common occurrences in daily clinical practice. Although these abnormalities can be readily ascertained from routine laboratory findings, only specific clinical correlates may attest as to their significance. Among a wide phenotypic spectrum, acute electrolyte and acid-base disturbances may affect the peripheral nervous system as arreflexic weakness (hypermagnesemia, hyperkalemia, and hypophosphatemia), the central nervous system as epileptic encephalopathies (hypomagnesemia, dysnatremias, and hypocalcemia), or both as a mixture of encephalopathy and weakness or paresthesias (hypocalcemia, alkalosis). Disabling complications may develop not only when these derangements are overlooked and left untreated (e.g., visual loss from intracranial hypertension in respiratory or metabolic acidosis; quadriplegia with respiratory insufficiency in hypermagnesemia) but also when they are inappropriately managed (e.g., central pontine myelinolisis when rapidly correcting hyponatremia; cardiac arrhythmias when aggressively correcting hypo- or hyperkalemia). Therefore prompt identification of the specific neurometabolic syndromes is critical to correct the causative electrolyte or acid-base disturbances and prevent permanent central or peripheral nervous system injury. This chapter reviews the pathophysiology, clinical investigations, clinical phenotypes, and current management strategies in disorders resulting from alterations in the plasma concentration of sodium, potassium, calcium, magnesium, and phosphorus as well as from acidemia and alkalemia.

  4. Lewis base activation of Lewis acids: development of a Lewis base catalyzed selenolactonization.

    Science.gov (United States)

    Denmark, Scott E; Collins, William R

    2007-09-13

    The concept of Lewis base activation of Lewis acids has been applied to the selenolactonization reaction. Through the use of substoichiometric amounts of Lewis bases with "soft" donor atoms (S, Se, P) significant rate enhancements over the background reaction are seen. Preliminary mechanistic investigations have revealed the resting state of the catalyst as well as the significance of a weak Brønsted acid promoter.

  5. A novel polymeric herbicide based on phenoxyacetic acid derivatives

    Directory of Open Access Journals (Sweden)

    Wimol Klaichim

    2009-01-01

    Full Text Available A novel polymeric herbicide based on phenoxyacetic acid derivatives was prepared by the reaction of epoxidised liquid natural rubber (ELNR with 2,4-dichlorophenoxyacetic acid (2,4-D or 2-methyl-4-chlorophenoxyacetic acid(MCPA. The liquid natural rubber (LNR was firstly obtained from the degradation of natural rubber latex with tert-butyl hydroperoxide and cobalt acetylacetonate at 65oC for 72 hrs. The epoxidised liquid natural rubber was prepared from thereaction of LNR with formic acid and hydrogen peroxide at 50oC for 6 hrs. The reaction of epoxidised liquid natural rubber with 2,4-D or MCPA using triethylamine as a catalyst in toluene was performed at 70, 80, and 90oC for 6, 9, 12, 18, and 24hrs. The polymeric herbicides obtained were characterized and the grafting percentage of 2,4-D or MCPA onto liquid natural rubber were also determined by FT-IR and 1H-NMR spectroscopy. It was found that the grafting percentage increased with increasing amount of reactants, temperature, and reaction time. The release of 2,4-D and MCPA from polymeric herbicides was investigated in pH 6, 7, and 8 buffers at room temperature. The results show that the slowest release of 2,4-D and MCPA was found to be constant at pH 7 for 14 and 10 days, respectively.

  6. A knowledge based advisory system for acid/base titrations in non-aqueous solvents

    OpenAIRE

    1996-01-01

    A computer program was developed that could advice on the choice of solvent and titrant for acid/base titrations in nonaqueous media. It is shown that the feasibility of a titration in a given solvent can be calculated from solvent properties and intrinsic acid/base properties of the sample components. A consistent set of properties for various solvents and a large number of acidic and basic compounds was calculated from literature data with the use of a genetic algorithm. Test results show t...

  7. Acid-base chemistry of frustrated water at protein interfaces.

    Science.gov (United States)

    Fernández, Ariel

    2016-01-01

    Water molecules at a protein interface are often frustrated in hydrogen-bonding opportunities due to subnanoscale confinement. As shown, this condition makes them behave as a general base that may titrate side-chain ammonium and guanidinium cations. Frustration-based chemistry is captured by a quantum mechanical treatment of proton transference and shown to remove same-charge uncompensated anticontacts at the interface found in the crystallographic record and in other spectroscopic information on the aqueous interface. Such observations are untenable within classical arguments, as hydronium is a stronger acid than ammonium or guanidinium. Frustration enables a directed Grotthuss mechanism for proton transference stabilizing same-charge anticontacts.

  8. Synthesis and curing of alkyd enamels based on ricinoleic acid

    Directory of Open Access Journals (Sweden)

    Jovičić Mirjana C.

    2010-01-01

    Full Text Available A combination of an alkyd resin with a melamine-formaldehyde resin gives a cured enamel film with the flexibility of the alkyd constituent and the high chemical resistance and hardness of the melamine resin at the same time. The melamine resin is a minor constituent and plays the role of a crosslinking agent. In this paper, alkyd resins of high hydroxyl numbers based on trimethylolpropane, ricinoleic acid and phthalic anhydride were synthesized. Two alkyds having 30 and 40 wt% of ricinoleic acid were formulated by calculation on alkyd constant. Alkyds were characterized by FTIR and by the determination of acid and hydroxyl numbers. Then synthesized alkyds were made into baking enamels by mixing with melamine-formaldehyde resins (weight ratio of 70:30 based on dried mass. Two types of commercial melamine resins were used: threeisobutoxymethyl melamine-formaldehyde resin (TIMMF and hexamethoxymethyl melamine resin (HMMMF. Prepared alkyd/melamine resin mixtures were cured in a differential scanning calorimeter (DSC under non-isothermal mode. Apparent degree of curing as a function of temperature was calculated from the curing enthalpies. Kinetic parameters of curing were calculated using Freeman-Carroll method. TIMMF resin is more reactive with synthesized alkyds than HMMMF resin what was expected. Alkyd resin with 30 wt% of ricinoleic acid is slightly more reactive than alkyd with 40 wt% of ricinoleic acid, probably because it has the high contents of free hydroxyl and acid groups. The gel content, Tg, thermal stability, hardness, elasticity and impact resistance of coated films cured at 150°C for 60 min were measured. Cured films show good thermal stability since the onset of films thermal degradation determined by thermogravimetric analysis (TGA is observed at the temperatures from 281 to 329°C. Films based on alkyd 30 are more thermal stable than those from alkyd 40, with the same melamine resin. The type of alkyd resin has no significant

  9. Isolation of living Algae growing in the shells of Molluscs and Barnacles with EDTA (ethylenediaminetetraacetic acid)

    NARCIS (Netherlands)

    Prud’homme van Reine, W.F.; Hoek, van den C.

    1966-01-01

    Several decalcifying mixtures or aqueous solutions of inorganic or organic acids are generally used for releasing algae growing in the shells of molluscs and barnacles, for instance dilute hydrochloric, nitric, citric, or acetic acid (4), a mixture of nitric acid, chromic acid and alcolhol (1), nitr

  10. Isolation of living Algae growing in the shells of Molluscs and Barnacles with EDTA (ethylenediaminetetraacetic acid)

    NARCIS (Netherlands)

    Prud’homme van Reine, W.F.; Hoek, van den C.

    1966-01-01

    Several decalcifying mixtures or aqueous solutions of inorganic or organic acids are generally used for releasing algae growing in the shells of molluscs and barnacles, for instance dilute hydrochloric, nitric, citric, or acetic acid (4), a mixture of nitric acid, chromic acid and alcolhol (1),

  11. Age estimation based on aspartic acid racemization in human sclera.

    Science.gov (United States)

    Klumb, Karolin; Matzenauer, Christian; Reckert, Alexandra; Lehmann, Klaus; Ritz-Timme, Stefanie

    2016-01-01

    Age estimation based on racemization of aspartic acid residues (AAR) in permanent proteins has been established in forensic medicine for years. While dentine is the tissue of choice for this molecular method of age estimation, teeth are not always available which leads to the need to identify other suitable tissues. We examined the suitability of total tissue samples of human sclera for the estimation of age at death. Sixty-five samples of scleral tissue were analyzed. The samples were hydrolyzed and after derivatization, the extent of aspartic acid racemization was determined by gas chromatography. The degree of AAR increased with age. In samples from younger individuals, the correlation of age and D-aspartic acid content was closer than in samples from older individuals. The age-dependent racemization in total tissue samples proves that permanent or at least long-living proteins are present in scleral tissue. The correlation of AAR in human sclera and age at death is close enough to serve as basis for age estimation. However, the precision of age estimation by this method is lower than that of age estimation based on the analysis of dentine which is due to molecular inhomogeneities of total tissue samples of sclera. Nevertheless, the approach may serve as a valuable alternative or addition in exceptional cases.

  12. How Do Undergraduate Students Conceptualize Acid-Base Chemistry? Measurement of a Concept Progression

    Science.gov (United States)

    Romine, William L.; Todd, Amber N.; Clark, Travis B.

    2016-01-01

    We developed and validated a new instrument, called "Measuring Concept progressions in Acid-Base chemistry" (MCAB) and used it to better understand the progression of undergraduate students' understandings about acid-base chemistry. Items were developed based on an existing learning progression for acid-base chemistry. We used the Rasch…

  13. Production of Lauric Acid and Pentaerythritol Based Biolubricant

    Directory of Open Access Journals (Sweden)

    Hamizah Ammarah Mahmud

    2014-01-01

    Full Text Available Production of a  biolubricant based on  lauric acid and pentaerythritol (PE was carried out. The esterification reaction at 180°C-200°C for 6-7 hours in the present of sulphuric acid as catalyst. The  end product (PE ester was confirmed through the determination of Fourier Transformation Infrared spectroscopy (FTIR, Nuclear Magnetic Resonance (NMR, GC-FID . The characterization of PE ester's of  viscosity index, pour point, flash point and  oxidative stability . The PE ester showed flash point at 250°C, pour point at 25°C, viscosity index 162 and the oxidative stability at 216°C respectively.The  PE ester produced is plausible to be used as potential  biolubricant.

  14. Acid-Base Balance in Uremic Rats with Vascular Calcification

    Directory of Open Access Journals (Sweden)

    Alan Peralta-Ramírez

    2014-07-01

    Full Text Available Background/Aims: Vascular calcification (VC, a major complication in humans and animals with chronic kidney disease (CKD, is influenced by changes in acid-base balance. The purpose of this study was to describe the acid-base balance in uremic rats with VC and to correlate the parameters that define acid-base equilibrium with VC. Methods: Twenty-two rats with CKD induced by 5/6 nephrectomy (5/6 Nx and 10 nonuremic control rats were studied. Results: The 5/6 Nx rats showed extensive VC as evidenced by a high aortic calcium (9.2 ± 1.7 mg/g of tissue and phosphorus (20.6 ± 4.9 mg/g of tissue content. Uremic rats had an increased pH level (7.57 ± 0.03 as a consequence of both respiratory (PaCO2 = 28.4 ± 2.1 mm Hg and, to a lesser degree, metabolic (base excess = 4.1 ± 1 mmol/l derangements. A high positive correlation between both anion gap (AG and strong ion difference (SID with aortic calcium (AG: r = 0.604, p = 0.02; SID: r = 0.647, p = 0.01 and with aortic phosphorus (AG: r = 0.684, p = 0.007; SID: r = 0.785, p = 0.01 was detected. Conclusions: In an experimental model of uremic rats, VC showed high positive correlation with AG and SID.

  15. Superabsorbent biphasic system based on poly(lactic acid) and poly(acrylic acid)

    Science.gov (United States)

    Sartore, Luciana; Pandini, Stefano; Baldi, Francesco; Bignotti, Fabio

    2016-05-01

    In this research work, biocomposites based on crosslinked particles of poly(acrylic acid), commonly used as superabsorbent polymer (SAP), and poly-L-lactic acid (PLLA) were developed to elucidate the role of the filler (i.e., polymeric crosslinked particles) on the overall physico-mechanical behavior and to obtain superabsorbent thermoplastic products. Samples prepared by melt-blending of components in different ratios showed a biphasic system with a regular distribution of particles, with diameter ranging from 5 to 10 μm, within the PLLA polymeric matrix. The polymeric biphasic system, coded PLASA i.e. superabsorbent poly(lactic acid), showed excellent swelling properties, demonstrating that cross-linked particles retain their superabsorbent ability, as in their free counterparts, even if distributed in a thermoplastic polymeric matrix. The thermal characteristics of the biocomposites evidence enhanced thermal stability in comparison with neat PLLA and also mechanical properties are markedly modified by addition of crosslinked particles which induce regular stiffening effect. Furthermore, in aqueous environments the particles swell and are leached from PLLA matrix generating very high porosity. These new open-pore PLLA foams, produced in absence of organic solvents and chemical foaming agents, with good physico-mechanical properties appear very promising for several applications, for instance in tissue engineering for scaffold production.

  16. Acid-base buffer effect of fulvic acid and barium fulvate from weathered coal

    Institute of Scientific and Technical Information of China (English)

    GUO Xiao-feng; LI Xi-feng

    2009-01-01

    The acid-base buffer characteristics of fulvic acid (FA) and barium fulvate (BaFA) were analyzed. Each share of the sample or model agents (phthalic acid and salicylic acid) were separately mixed into a series of shares of dilute solutions of HCI or NaOH with a series of concentration. The original pH values of the solutions were arranged from 2 to 13. Final balanced pH of each share was measured. The pH changes show that FA and BaFA possess buffer ability, whereas the model agents do not. The tendency of balanced pH values was 5.4 for FA and 7.4 for BaFA, whereas the original pH was 4.0-8.5; balanced pH changed little. At room temperature, the maximum buffer capacities were as follows:18.11 mmol hydroxyl per gram FA, 11.25 mmol hydroxyl per gram BaFA, 1.19 mmol proton per gram FA, and 1.45 mmol proton per gram BaFA. Mathematics analysis shows that logarithm of buffer capacities of FA and BaFA is linearly dependent on original pH. Compared with BaFA and model agents, it is concluded that FA buffer capacity against hydroxyl relies not only on its acidic groups, BaFA buffer capacity against hydroxyl does not rely on its acidic groups, and FA buffer capacity against proton is not related with its carboxyl and phenolic hydroxyl group. The pH values of FA-water solutions with different concentrations from 1 to 10 grams per liter were measured. Their pH values were slightly affected by its concentration. Thus, FA possesses a much stronger buffer ability against water dilution than common buffer agent. All the pH values of FA water solutions were very nearby 5.4,just the same as the balanced pH tendency for adding FA.

  17. Acid-base buffer effect of fulvic acid and barium fulvate from weathered coal

    Energy Technology Data Exchange (ETDEWEB)

    Xiao-feng Guo; Xi-feng Li [Taiyuan University of Science and Technology, Taiyuan (China). Mining Engineering Institute

    2009-12-15

    The acid-base buffer characteristics of fulvic acid (FA) and barium fulvate (BaFA) were analyzed. Each share of the sample or model agents (phthalic acid and salicylic acid) were separately mixed into a series of shares of dilute solutions of HCl or NaOH with a series of concentration. The original pH values of the solutions were arranged from 2 to 13. Final balanced pH of each share was measured. The pH changes show that FA and BaFA possess buffer ability, whereas the model agents do not. The tendency of balanced pH values was 5.4 for FA and 7.4 for BaFA, whereas the original pH was 4.0-8.5; balanced pH changed little. At room temperature, the maximum buffer capacities were as follows: 18.11 mmol hydroxyl per gram FA, 11.25 mmol hydroxyl per gram BaFA, 1.19 mmol proton per gram FA, and 1.45 mmol proton per gram BaFA. Mathematics analysis shows that logarithm of buffer capacities of FA and BaFA is linearly dependent on original pH. Compared with BaFA and model agents, it is concluded that FA buffer capacity against hydroxyl relies not only on its acidic groups, BaFA buffer capacity against hydroxyl does not rely on its acidic groups, and FA buffer capacity against proton is not related with its carboxyl and phenolic hydroxyl group. The pH values of FA-water solutions with different concentrations from 1 to 10 grams per liter were measured. Their pH values were slightly affected by its concentration. Thus, FA possesses a much stronger buffer ability against water dilution than common buffer agent. All the pH values of FA water solutions were very nearly 5.4, just the same as the balanced pH tendency for adding FA. 10 refs., 5 figs., 2 tabs.

  18. General analytical procedure for determination of acidity parameters of weak acids and bases.

    Science.gov (United States)

    Pilarski, Bogusław; Kaliszan, Roman; Wyrzykowski, Dariusz; Młodzianowski, Janusz; Balińska, Agata

    2015-01-01

    The paper presents a new convenient, inexpensive, and reagent-saving general methodology for the determination of pK a values for components of the mixture of diverse chemical classes weak organic acids and bases in water solution, without the need to separate individual analytes. The data obtained from simple pH-metric microtitrations are numerically processed into reliable pK a values for each component of the mixture. Excellent agreement has been obtained between the determined pK a values and the reference literature data for compounds studied.

  19. Equilibrium of acidifying and alkalinizing metabolic acid-base disorders in cirrhosis.

    Science.gov (United States)

    Funk, Georg-Christian; Doberer, Daniel; Osterreicher, Christoph; Peck-Radosavljevic, Markus; Schmid, Monika; Schneeweiss, Bruno

    2005-06-01

    Conflicting results exist with regard to metabolic acid-base status in liver cirrhosis, when the classic concept of acid-base analysis is applied. The influence of the common disturbances of water, electrolytes and albumin on acid-base status in cirrhosis has not been studied. The aim of this study was to clarify acid-base status in cirrhotic patients by analyzing all parameters with possible impact on acid-base equilibrium. Fifty stable cirrhotic patients admitted to a university hospital. Arterial acid-base status was analyzed using the principles of physical chemistry and compared with 10 healthy controls. Apart from mild hypoalbuminemic alkalosis, acid-base state was normal in Child-Pugh A cirrhosis. Respiratory alkalosis was the net acid-base disorder in Child-Pugh B and C cirrhosis with a normal overall metabolic acid-base state (Base excess-1.0 (-3.6 to 1.6) vs 1.1 (-0.2 to 1.1) mmol/l, P = 0.136, compared with healthy controls, median (interquartile range)). Absence of an apparent metabolic acid-base disorder was based on an equilibrium of hypoalbuminemic alkalosis and of dilutional acidosis and hyperchloremic acidosis. A balance of offsetting acidifying and alkalinizing metabolic acid-base disorders leaves the net metabolic acid-base status unchanged in cirrhosis.

  20. When acid-base titrations are carried out in unusual conditions

    OpenAIRE

    Domenico De Marco; Rocco De Marco

    2012-01-01

    Uncommon aspects in acid-base titrations are presented, which occur in titrations between both mono- and/or poly-functional acid and bases but are rarely introduced in ordinary analytical chemistry courses.

  1. Determination of the Acid-Base Dissociation Constant of Acid-Degradable Hexamethylenetetramine by Capillary Zone Electrophoresis.

    Science.gov (United States)

    Takayanagi, Toshio; Shimakami, Natsumi; Kurashina, Masashi; Mizuguchi, Hitoshi; Yabutani, Tomoki

    2016-01-01

    The acid-base equilibrium of hexamethylenetetramine (hexamine) was analyzed with its effective electrophoretic mobility by capillary zone electrophoresis. Although hexamine is degradable in a weakly acidic aqueous solution, and the degraded products of ammonia and formaldehyde can be formed, the effective electrophoretic mobility of hexamine was measured in the pH range between 2.8 and 6.9. An acid-base dissociation equilibrium of the protonated hexamine was analyzed based on the mobility change, and an acid dissociation constant of pKa = 4.93 ± 0.01 (mean ± standard error, ionic strength: 0.020 mol dm(-3)) was determined. The monoprotic acid-base equilibrium of hexamine was confirmed through comparisons of its electrophoretic mobility with the N-ethylquinolinium ion and with the monocationic N-ethyl derivative of hexamine, as well as a slope analysis of the dissociation equilibrium.

  2. Acid base catalyzed transesterification kinetics of waste cooking oil

    Energy Technology Data Exchange (ETDEWEB)

    Jain, Siddharth; Sharma, M.P.; Rajvanshi, Shalini [Alternate Hydro Energy Centre, Indian Institute of Technology, Roorkee (India)

    2011-01-15

    The present study reports the results of kinetics study of acid base catalyzed two step transesterification process of waste cooking oil, carried out at pre-determined optimum temperature of 65 C and 50 C for esterification and transesterification process respectively under the optimum condition of methanol to oil ratio of 3:7 (v/v), catalyst concentration 1%(w/w) for H{sub 2}SO{sub 4} and NaOH and 400 rpm of stirring. The optimum temperature was determined based on the yield of ME at different temperature. Simply, the optimum concentration of H{sub 2}SO{sub 4} and NaOH was determined with respect to ME Yield. The results indicated that both esterification and transesterification reaction are of first order rate reaction with reaction rate constant of 0.0031 min{sup -1} and 0.0078 min{sup -1} respectively showing that the former is a slower process than the later. The maximum yield of 21.50% of ME during esterification and 90.6% from transesterification of pretreated WCO has been obtained. This is the first study of its kind which deals with simplified kinetics of two step acid-base catalyzed transesterification process carried under the above optimum conditions and took about 6 h for complete conversion of TG to ME with least amount of activation energy. Also various parameters related to experiments are optimized with respect to ME yield. (author)

  3. Learning in constructivist environments: a research based on the acid-base subject

    Directory of Open Access Journals (Sweden)

    Vera Gouveia

    2004-08-01

    Full Text Available This communication intends to show as a constructivist environment permits a better learning of some concepts related to the acid-base subject, where generally students have some misconceptions at the beginning, as many researches had proved. Based on a long epistemological, psychological and educational reflection, supported by a wide bibliographical research and our own experience, we make some considerations about learning constructivist environments in the classroom, emphasising the cooperative work of students. In the second part, the effects produced in the teaching of the acid-base by such kind of environment are described, according a quasi-experimental study involving 52 students in their 10th year of education, distributed by two equivalent groups, taught by the same teacher. The results indicate clearly that the constructivist environment promoted a better learning of the acid-base subject, as well as improved the educational relationship in the classroom. Furthermore, the students developed positive attitudes regarding themselves and the others.

  4. A Comparative Study on Corrosion Inhibition of Mild Steel Using Piper Nigrum L. in Different Acid Medium

    Directory of Open Access Journals (Sweden)

    B. Anand

    2010-01-01

    Full Text Available The inhibition of corrosion of mild steel using Piper nigrum L in different acid medium by weight loss method was investigated. The corrosion inhibition was studied in hydrochloric acid and sulphuric acid by weight loss method at different time interval at room temperature. The result showed that the corrosion inhibition efficiency of this compound was found to vary with different time interval and different acid concentration. Also, it was found that the corrosion inhibition behavior of Piper nigrum L is greater in sulphuric acid than hydrochloric acid. So, Piper nigrum L can be used as a good inhibitor for preventing mild steel material.

  5. The comprehensive acid-base characterization of glutathione

    Science.gov (United States)

    Mirzahosseini, Arash; Somlyay, Máté; Noszál, Béla

    2015-02-01

    Glutathione in its thiol (GSH) and disulfide (GSSG) forms, and 4 related compounds were studied by 1H NMR-pH titrations and a case-tailored evaluation method. The resulting acid-base properties are quantified in terms of 128 microscopic protonation constants; the first complete set of such parameters for this vitally important pair of compounds. The concomitant 12 interactivity parameters were also determined. Since biological redox systems are regularly compared to the GSH-GSSG pair, the eight microscopic thiolate basicities determined this way are exclusive means for assessing subtle redox parameters in a wide pH range.

  6. Advances in nucleic acid-based diagnostics of bacterial infections

    DEFF Research Database (Denmark)

    Barken, Kim Bundvig; Haagensen, Janus Anders Juul; Tolker-Nielsen, Tim

    2007-01-01

    and slow growing microorgansims. The widespread use of antibiotics has resulted in an increased number of cases with resistant microorganisms such as methicillin-resistant Staphylococcus aureus, vancomycin resistant enterococci, and multidrug-resistant Mycobacterium tuberculosis. Rapid detection...... of multiparameter assays where several pathogens and antibiotic resistance genes can be detected simultaneously.......Methods for rapid detection of infectious bacteria and antimicrobial-resistant pathogens have evolved significantly over the last decade. Many of the new procedures are nucleic acid-based and replace conventional diagnostic methods like culturing which is time consuming especially with fastidious...

  7. Opuntia ficus indica (L.) Fruit Extract as Natural Indicator in Acid-Base Titration

    OpenAIRE

    Manoj A. Suva

    2014-01-01

    In routine experiments synthetic indicators are the choice of acid base titrations. But there are some limitations like environmental pollution, availability and higher cost which leads to search for natural compounds as an acid base indicator was started. The present work highlights theexploit of the methanolic and aqueous extract of the fruit of Opuntia ficus indica plants as a natural acid base indicator in acid base titrations. Opuntia ficus indica plant was identified and fruits were was...

  8. A novel synthesis of chromone based unnatural α-amino acid derivatives

    Indian Academy of Sciences (India)

    VENU KANDULA; RAMAKRISHNA GUDIPATI; ANINDITA CHATTERJEE; MURALIDARAN KALIYAPERUMALA; SATYANARAYANA YENNAM; MANORANJAN BEHERA

    2017-08-01

    An efficient method for the preparation of chromone based α-amino acid derivatives by alkylation of glycinate schiff base with 3-bromomethyl chromone as well as 2-bromomethyl chromone has been described. Using this method, 2-amino-3-(4-oxo-2-chromenyl)propanoic acid and 2-amino-3-(4-oxo-3- chromenyl)propanoic acid, two novel chromone-amino acid conjugates have been prepared. Furthermore, the separation of chromone amino acid enantiomers by chiral column chromatography was accomplished.

  9. Dissolving Carboxylic Acids and Primary Amines on the Overhead Projector

    Science.gov (United States)

    Solomon, Sally D.; Rutkowsky, Susan A.

    2010-01-01

    Liquid carboxylic acids (or primary amines) with limited solubility in water are dissolved by addition of aqueous sodium hydroxide (or hydrochloric acid) on the stage of an overhead projector using simple glassware and very small quantities of chemicals. This effective and colorful demonstration can be used to accompany discussions of the…

  10. KINETICS OF DISSOLUTION OF PHOSPHORITE IN ACID MIXTURES

    African Journals Online (AJOL)

    The effect of hydrochloric acid on the dissolution of fluorapatite by sulphuric acid was studied at various H2SO_,_:HCl volume ratios ranging from 100 to 0 volume % of the ... Indeed only diffusion controlled processes are affected by the stirring speed [27]. ... surface area of the dissolving mineral [30], in this case fluorapatite.

  11. Acid-base interactions in microbial adhesion to hexadecane and chloroform

    NARCIS (Netherlands)

    Bos, R; Busscher, HJ; Geertsema-Doornbusch, GI; Van Der Mei, HC; Mittal, KL

    2000-01-01

    Acid-base interactions play an important role in adhesion, including microbial adhesion to surfaces. Qualitatively acid-base interactions in microbial adhesion can be demonstrated by comparing adhesion to hexadecane (a negatively charged interface in aqueous solutions, unable to exert acid-base inte

  12. The relationship between odd- and branched-chain fatty acids and microbial nucleic acid bases in rumen.

    Science.gov (United States)

    Liu, Keyuan; Hao, Xiaoyan; Li, Yang; Luo, Guobin; Zhang, Yonggen; Xin, Hangshu

    2017-06-26

    This study aims to identify the relationship between odd- and branched-chain fatty acids (OBCFAs) and microbial nucleic acid base in the rumen, and to establish a model to accurately predict microbial protein flow by using OBCFA. To develop the regression equations, data on the rumen contents of individual cows was obtained from 2 feeding experiments. In the first experiment, 3 rumen-fistulated dry dairy cows arranged in a 3×3 Latin square were fed diets of differing forage to concentration ratios (F:C). The second experiment consisted of 9 lactating Holstein dairy cows of similar body weights at the same fetal time. For each milk stage, 3 cows with similar milk production were selected. The rumen contents were sampled at 4 time points of every two hours after morning feeding 6 h, and then to analyse the concentrations of OBCFA and microbial nucleic acid bases in the rumen samples. The ruminal bacteria nucleic acid bases were significantly influenced by feeding diets of differing forge to concentration ratios and milk stages of dairy (P acids, especially odd-chain fatty acids and C15:0 isomers, strongly correlated with the microbial nucleic acid bases in the rumen (P acid bases which established by ruminal OBCFAs contents showed a good a good predictive capacity, as indicated by reasonably low SEs and high R-squared values. This finding suggests that the rumen OBCFA composition could be used as an internal marker of rumen microbial matter.

  13. Ion exchange equilibria in simultaneous extraction of platinum(II, IV) and rhodium(III) from hydrochloric solutions

    Science.gov (United States)

    Mel'nikov, A. M.; Kononova, O. N.; Pavlenko, N. I.; Krylov, A. S.

    2012-06-01

    Regularities of sorption extraction of platinum(II, IV) and rhodium(III) by anion exchangers of various physical and chemical structure in the presence of hydrochloric media were studied. It is established that AM-2B, Purolite A 500, and Purolite S 985 ionites adsorb complex anions of platinum metals employing mixed mechanism. A high affinity of the studied anionites for the studied complex anions of platinum and rhodium is established.

  14. Soluble adenylyl cyclase is an acid-base sensor in epithelial base-secreting cells.

    Science.gov (United States)

    Roa, Jinae N; Tresguerres, Martin

    2016-08-01

    Blood acid-base regulation by specialized epithelia, such as gills and kidney, requires the ability to sense blood acid-base status. Here, we developed primary cultures of ray (Urolophus halleri) gill cells to study mechanisms for acid-base sensing without the interference of whole animal hormonal regulation. Ray gills have abundant base-secreting cells, identified by their noticeable expression of vacuolar-type H(+)-ATPase (VHA), and also express the evolutionarily conserved acid-base sensor soluble adenylyl cyclase (sAC). Exposure of cultured cells to extracellular alkalosis (pH 8.0, 40 mM HCO3 (-)) triggered VHA translocation to the cell membrane, similar to previous reports in live animals experiencing blood alkalosis. VHA translocation was dependent on sAC, as it was blocked by the sAC-specific inhibitor KH7. Ray gill base-secreting cells also express transmembrane adenylyl cyclases (tmACs); however, tmAC inhibition by 2',5'-dideoxyadenosine did not prevent alkalosis-dependent VHA translocation, and tmAC activation by forskolin reduced the abundance of VHA at the cell membrane. This study demonstrates that sAC is a necessary and sufficient sensor of extracellular alkalosis in ray gill base-secreting cells. In addition, this study indicates that different sources of cAMP differentially modulate cell biology. Copyright © 2016 the American Physiological Society.

  15. Comparative bioavailability studies of citric acid and malonic acid based aspirin effervescent tablets

    Directory of Open Access Journals (Sweden)

    Anju Gauniya

    2010-01-01

    Full Text Available Purpose: The present investigation is aimed at comparing the pharmacokinetic profile (Bioavailability of aspirin in tablet formulations, which were prepared by using different effervescent excipients such as citric acid and malonic acid. Materials and Methods: The relative bioavailability and pharmacokinetics of citric acid based aspirin effervescent tablet (Product A and malonic acid based aspirin effervescent tablet (Product B formulations were evaluated for an in-vitro dissolution study and in-vivo bioavailability study, in 10 normal healthy rabbits. The study utilized a randomized, crossover design with a one-week washout period between doses. Blood samples were collected at 0, 1, 2, 4, 6, 8, 12 and 24 hours following a 100 mg/kg dose. Plasma samples were assayed by High Performance Liquid Chromatography. T max , C max , AUC 0-24 , AUC 0- ∞, MRT, K a, and relative bioavailability were estimated using the traditional pharmacokinetic methods and were compared by using the paired t-test. Result: In the present study, Products A and B showed their T max , C max , AUC 0-24 , AUC 0- ∞, MRT, and K a values as 2.5 h, 2589 ± 54.79 ng/ml, 9623 ± 112.87 ng.h/ml, 9586 ± 126.22 ng.h/ml, 3.6 ± 0.10 h, and 0.3698 ± 0.003 h -1 for Product A and 3.0 h, 2054 ± 55.79 ng/ml, 9637 ± 132.87 ng.h/ml, 9870 ± 129.22 ng.h/ml, 4.76 ± 0.10 h, and 0.3812 ± 0.002 h -1 for Product B, respectively. Conclusion: The results of the paired t-test of pharmacokinetics data showed that there was no significant difference between Products A and B. From both the in vitro dissolution studies and in vivo bioavailability studies it was concluded that products A and B had similar bioavailability.

  16. The effects of borate minerals on the synthesis of nucleic acid bases, amino acids and biogenic carboxylic acids from formamide.

    Science.gov (United States)

    Saladino, Raffaele; Barontini, Maurizio; Cossetti, Cristina; Di Mauro, Ernesto; Crestini, Claudia

    2011-08-01

    The thermal condensation of formamide in the presence of mineral borates is reported. The products afforded are precursors of nucleic acids, amino acids derivatives and carboxylic acids. The efficiency and the selectivity of the reaction was studied in relation to the elemental composition of the 18 minerals analyzed. The possibility of synthesizing at the same time building blocks of both genetic and metabolic apparatuses, along with the production of amino acids, highlights the interest of the formamide/borate system in prebiotic chemistry.

  17. Sphingoid bases inhibit acid-induced demineralization of hydroxyapatite.

    Science.gov (United States)

    Valentijn-Benz, Marianne; van 't Hof, Wim; Bikker, Floris J; Nazmi, Kamran; Brand, Henk S; Sotres, Javier; Lindh, Liselott; Arnebrant, Thomas; Veerman, Enno C I

    2015-01-01

    Calcium hydroxyapatite (HAp), the main constituent of dental enamel, is inherently susceptible to the etching and dissolving action of acids, resulting in tooth decay such as dental caries and dental erosion. Since the prevalence of erosive wear is gradually increasing, there is urgent need for agents that protect the enamel against erosive attacks. In the present study we studied in vitro the anti-erosive effects of a number of sphingolipids and sphingoid bases, which form the backbone of sphingolipids. Pretreatment of HAp discs with sphingosine, phytosphingosine (PHS), PHS phosphate and sphinganine significantly protected these against acid-induced demineralization by 80 ± 17%, 78 ± 17%, 78 ± 7% and 81 ± 8%, respectively (p measurement revealed that HAp discs treated with PHS were almost completely and homogeneously covered by patches of PHS. This suggests that PHS and other sphingoid bases form layers on the surface of HAp, which act as diffusion barriers against H(+) ions. In principle, these anti-erosive properties make PHS and related sphingosines promising and attractive candidates as ingredients in oral care products.

  18. Geopolymers Based on Phosphoric Acid and Illito-Kaolinitic Clay

    Directory of Open Access Journals (Sweden)

    S. Louati

    2016-01-01

    Full Text Available New three-dimensional geopolymer materials based on illito-kaolinitic clay and phosphoric acid were synthesized. The effect of Si/P molar ratio on the geopolymers properties was studied. Raw, calcined clay, and geopolymers structures were investigated using XRD, IR spectroscopy, and SEM. The phosphoric acid-based geopolymers mechanical properties were evaluated by measuring the compressive strength. The Si/P molar ratio was found to increase with the increase of the compressive strength of the obtained geopolymers, which attained a maximum value at Si/P equal to 2.75. Beyond this ratio, the mechanical strength decreases. The XRD patterns of these geopolymers samples have proven that when the Si/P molar ratio decreases, the amorphous phase content increases. Besides, the structural analyses have revealed the presence of aluminum phosphate and Si-O-Al-O-P polymeric structure, whatever the Si/P molar ratio is (between 2.25 and 3.5. The obtained results have confirmed that the presence of the associated minerals such as hematite and quartz in the clay does not prevent the geopolymerization reaction, but the presence of illite mineral seems to have a modest contribution in the geopolymerization.

  19. Incidence of Postoperative Acid-Base Disturbances in Abdominal Surgery

    Directory of Open Access Journals (Sweden)

    Taghavi Gilani M

    2014-04-01

    Full Text Available Introduction: Respiratory and blood pressure changes as well as fluid administration alter the acid-base balance during the perioperative period which may cause consciousness disturbance and additional hemodynamic disorders. The aim of this study was to identify frequent postoperative acid-base disturbances in order to control postoperative complications. Materials and Methods:This prospective, observational study design was used on patients who underwent abdominal surgery during a six-month period. Gasometry was performed immediately after the patients’ admittion to ICU and six and 12 hours postoperatively. SPSS v13 software was used, and PResults: 213 patients (123 male and 90 female aged 14-85 years (51.7± 22.4 were evaluated. During admission, PH and PaCO2 were (7.29±0.13 and (38.3±11.9, respectively; however, although PH increased gradually (P=0.001, PaCO2 was reduced (P=0.03. Bicarbonate and base excess had opposite effects; bicarbonate initially decreased but increased after 12 hours (P=0.001, whereas base excess initially increased (-6.3±11.6 and then decreased gradually (P=0.003. The arterial oxygen pressure was reduced for 22.5% of the patients throughout the admission period, and this did not significantly change (P=0.57. Conclusion: According to the results, in admission, 65.7% had metabolic acidosis, but metabolic alkalosis was the least. Gradually, metabolic acidosis was modified, but metabolic alkalosis increased. Intraoperative hypotension and fluid infusion may be the main factors of early metabolic acidosis and control of hypotension, or correction of acidosis may increase metabolic alkalosis.

  20. Reactivity of clay minerals with acids and alkalies

    Science.gov (United States)

    Carroll, D.; Starkey, H.C.

    1971-01-01

    One-g samples of a montmorillonite, a metabentonite, an illite, two kaolinites, and three halloysites were treated with 50 ml of hydrochloric acid (6??45 N, 1:1), acetic acid (4??5 N, 1:3), sodium hydroxide (2??8 N), sodium chloride solution (pH 6??10; Na = 35???; Cl = 21??5???), and natural sea water (pH 7??85; Na = 35??5???; Cl = 21??5???) for a 10-day period in stoppered plastic vials. The supernatant solutions were removed from the clay minerals and analyzed for SiO2, Al2O3, CaO, MgO, Na2O, and K2O. All the solutions removed some SiO2, Al2O3, and Fe2O3 from the samples, but the quantities were small. Sodium hydroxide attacked the kaolin group minerals more strongly than it did montmorillonite, metabentonite, or illite. Halloysite was more strongly attacked by hydrochloric acid than was any of the other experimental minerals. Hydrochloric acid removed iron oxide coatings from soil clay minerals, but acetic acid did not remove them completely. The samples most strongly attacked by HCl and NaOH were examined by X-ray diffraction. Acid treatment did not destroy the structure of the clays, but the halloysite structure was partially destroyed. Sodium hydroxide attacked the halloysite structure, as shown by chemical analysis and X-ray diffraction. These experiments show that treatment in dilute acids has no harmful effect in the preparation of clays for X-ray diffraction. Acetic acid is preferred to hydrochloric acid for this purpose. Hydrochloric acid cleans clay minerals by removing free iron oxide from the surface; acetic acid is less effective. ?? 1971.

  1. Nutrient based estimation of acid-base balance in vegetarians and non-vegetarians.

    Science.gov (United States)

    Deriemaeker, Peter; Aerenhouts, Dirk; Hebbelinck, Marcel; Clarys, Peter

    2010-03-01

    A first objective of the present study was to estimate the acid-base balance of the food intake in vegetarians and non-vegetarians. A second objective was to evaluate if additional input of specific food items on the existing potential renal acid load (PRAL) list was necessary for the comparison of the two dietary patterns. Thirty vegetarians between the age of 18 and 30 years were matched for sex, age and BMI with 30 non-vegetarians. Based on the 3-days food diaries the acid-base status of the food intake was estimated using the PRAL method. Mean PRAL values as estimated with the standard table yielded an alkaline load of -5.4 +/- 14.4 mEq/d in the vegetarians compared to an acid load of 10.3 +/- 14.4 mEq/d in the nonvegetarians (palkaline load of -10.9 +/-19.7 mEq/d in the vegetarians compared to an acid load of 13.8 +/- 17.1 mEq/d for the non-vegetarians (palkaline outcomes compared to non-vegetarian diets. The use of the standard PRAL table was sufficient for discrimination between the two diets.

  2. Synthesis of bio-based methacrylic acid by decarboxylation of itaconic acid and citric acid catalyzed by solid transition-metal catalysts

    NARCIS (Netherlands)

    Notre, le J.E.L.; Witte-van Dijk, S.C.M.; Haveren, van J.; Scott, E.L.; Sanders, J.P.M.

    2014-01-01

    Methacrylic acid, an important monomer for the plastics industry, was obtained in high selectivity (up to 84%) by the decarboxylation of itaconic acid using heterogeneous catalysts based on Pd, Pt and Ru. The reaction takes place in water at 200–2508C without any external added pressure, conditions

  3. Exploratory Catalyst Screening Studies on the Base Free Conversion of Glycerol to Lactic Acid and Glyceric Acid in Water Using Bimetallic Au–Pt Nanoparticles on Acidic Zeolites

    NARCIS (Netherlands)

    Purushothaman, R.K.P.; Haveren, van J.; Mayoral, A.; Melian-Cabrera, I.; Heeres, H.J.

    2014-01-01

    The base free oxidation of glycerol with molecular oxygen in water using bimetallic Au-Pt catalysts on three different acidic zeolite supports (H-mordenite, H-beta and H-USY) was explored in a batch setup. At temperatures between 140 and 180 degrees C, lactic acid formation was significant and

  4. Synthesis of bio-based methacrylic acid by decarboxylation of itaconic acid and citric acid catalyzed by solid transition-metal catalysts

    NARCIS (Netherlands)

    Notre, le J.E.L.; Witte-van Dijk, S.C.M.; Haveren, van J.; Scott, E.L.; Sanders, J.P.M.

    2014-01-01

    Methacrylic acid, an important monomer for the plastics industry, was obtained in high selectivity (up to 84%) by the decarboxylation of itaconic acid using heterogeneous catalysts based on Pd, Pt and Ru. The reaction takes place in water at 200–2508C without any external added pressure, conditions

  5. Acid-base titrations using microfluidic paper-based analytical devices.

    Science.gov (United States)

    Karita, Shingo; Kaneta, Takashi

    2014-12-16

    Rapid and simple acid-base titration was accomplished using a novel microfluidic paper-based analytical device (μPAD). The μPAD was fabricated by wax printing and consisted of ten reservoirs for reaction and detection. The reaction reservoirs contained various amounts of a primary standard substance, potassium hydrogen phthalate (KHPth), whereas a constant amount of phenolphthalein was added to all the detection reservoirs. A sample solution containing NaOH was dropped onto the center of the μPAD and was allowed to spread to the reaction reservoirs where the KHPth neutralized it. When the amount of NaOH exceeded that of the KHPth in the reaction reservoirs, unneutralized hydroxide ion penetrated the detection reservoirs, resulting in a color reaction from the phenolphthalein. Therefore, the number of the detection reservoirs with no color change determined the concentration of the NaOH in the sample solution. The titration was completed within 1 min by visually determining the end point, which required neither instrumentation nor software. The volumes of the KHPth and phenolphthalein solutions added to the corresponding reservoirs were optimized to obtain reproducible and accurate results for the concentration of NaOH. The μPADs determined the concentration of NaOH at orders of magnitude ranging from 0.01 to 1 M. An acid sample, HCl, was also determined using Na2CO3 as a primary standard substance instead of KHPth. Furthermore, the μPAD was applicable to the titrations of nitric acid, sulfuric acid, acetic acid, and ammonia solutions. The μPADs were stable for more than 1 month when stored in darkness at room temperature, although this was reduced to only 5 days under daylight conditions. The analysis of acidic hot spring water was also demonstrated in the field using the μPAD, and the results agreed well with those obtained by classic acid-base titration.

  6. Capsella bursa-pastoris extract as an eco-friendly inhibitor on the corrosion of Q235 carbon steels in 1 mol·L-1 hydrochloric acid☆

    Institute of Scientific and Technical Information of China (English)

    Qin Hu; Yubing Qiu; Guoan Zhang; Xingpeng Guo

    2015-01-01

    The corrosion inhibition effect of Capsel a bursa-pastoris extracts (CBE) for Q235 carbon steels in 1 mol·L−1 hy-drochloric acid solution was studied using electrochemical methods, environmental scanning electron microsco-py (SEM) and Raman microscopy analysis. The polarization plots indicate that CBE serves as an effective, mixed-type inhibitor. Linear polarization resistance shows that increasing CBE concentration and temperature results in increased inhibition efficiency. The highest inhibition efficiency can reach 97%when adding 60 mg·L−1 CBE, which is better than some reported plant extracts under the similar environment. The adsorption of CBE molecules is found to obey the Langmuir adsorption isotherm. Some thermodynamic and kinetic parameters for the adsorption process, such as the adsorption equilibrium constant (K), free energy of adsorption (ΔGads), ac-tivation energy of corrosion reaction (Ea) and the heat of adsorption (Q ads), are calculated and discussed. SEM and Raman microscopy analysis also demonstrate the formation of a CBE inhibition film on the metal surface.

  7. Adsorption properties and inhibition of mild steel corrosion in hydrochloric solution by some newly synthesized diamine derivatives: Experimental and theoretical investigations

    Energy Technology Data Exchange (ETDEWEB)

    Herrag, L.; Hammouti, B.; Elkadiri, S.; Aouniti, A. [Laboratoire de Chimie Appliquee et Environnement, LCAE-URAC18, Faculte des Sciences, Universite Mohammed Premier, B.P. 717, M-6000 Oujda (Morocco); Jama, C. [Unite Materiaux et Transformations (UMET), Ingenierie des Systemes Polymeres, CNRS UMR 8207, ENSCL, B.P. 90108, F-59652 Villeneuve d' Ascq Cedex (France); Vezin, H. [Laboratoire de Spectrochimie Infrarouge et Raman (LASIR), UMR-CNRS 8516, Universite des Sciences et Technologies de Lille, Batiment C5, F-59655 Villeneuve d' Ascq Cedex (France); Bentiss, F., E-mail: fbentiss@enscl.f [Laboratoire de Chimie de Coordination et d' Analytique (LCCA), Faculte des Sciences, Universite Chouaib Doukkali, B.P. 20, M-24000 El Jadida (Morocco)

    2010-09-15

    New diamine derivatives, namely 2-[{l_brace}2-[bis-(2-hydroxyethyl)amino]ethyl{r_brace}(2-hydroxyethyl)amino]ethanol (DAME) and 2-[{l_brace}2-[bis-(2-hydroxyethyl)amino]ethyl{r_brace}(2-hydroxyethyl)amino]propanol (DAMP) were synthesised and their inhibitive action against the corrosion of mild steel in 1 M HCl solution were investigated at 308 K. The detailed study of DAME is given using gravimetric measurements and polarization curves method. Results show that DAME is a good inhibitor and inhibition efficiency reaches 91.7% at 10{sup -3} M. Tafel polarization study revealed that DAME acts as a mixed-type inhibitor. The inhibitor adsorption process in mild steel/DAME/hydrochloric acid system was studied at different temperatures (308-353 K) by means of weight loss measurements. The adsorption of DAME on steel surface obeyed Langmuir's adsorption isotherm. The kinetic and thermodynamic parameters for mild steel corrosion and inhibitor adsorption, respectively, were determined and discussed. The comparative study of inhibitive performance of the two diamine derivatives revealed that DAME is more effective than DAMP. Quantitative Structure-Activity Relationship (QSAR) approach has been conducted in attempt to correlate the corrosion inhibition properties of these diamine derivatives with their calculated quantum chemical parameters.

  8. Syntheses and structure characterization of ten acid-base hybrid crystals based on N-containing aromatic brønsted bases and mineral acids

    Science.gov (United States)

    Lin, Zhihao; Jin, Shouwen; Li, Xiaoliang; Xiao, Xiao; Hu, Kaikai; Guo, Ming; Chi, Xinchen; Liu, Hui; Wang, Daqi

    2017-10-01

    Cocrystallization of the aromatic brønsted bases with a series of mineral acids gave a total of ten hybrid salts with the compositions: (2-methylquinoline)2: (hydrochloride acid): 3H2O [(HL1)+. (L1)·· (Cl-) · (H2O)3] (1), (6-bromobenzo[d]thiazol-2-amine): (hydrochloride acid) [(HL2)+. (Cl-)] (2), (6-bromobenzo[d]thiazol-2-amine): (nitric acid) [(HL2)+. (NO3-)] (3), (6-bromobenzo[d]thiazol-2-amine): (sulfuric acid) [(HL2)+ · (HSO4)-] (4), (6-bromobenzo[d]thiazol-2-amine): (phosphoric acid) [(HL2)+ · (H2PO4)-] (5), (5,7-dimethyl-1,8-naphthyridine-2-amine): (hydrochloride acid): 3H2O [(HL3)+ · (Cl-) (H2O)3] (6), (5,7-dimethyl-1,8-naphthyridine-2-amine): (hydrobromic acid): CH3OH [(HL3)+ · (Br)- · CH3OH] (7), (5,7-dimethyl-1,8-naphthyridine-2-amine): (sulfuric acid): H2O [(HL3)+ · (HSO4)- · H2O] (8), (2-aminophenol): (phosphoric acid) [(HL4)+ · (H2PO4)-] (9), and (2-amino-4-chlorophenol): (phosphoric acid) [(HL5)+ · (H2PO4)-] (10). The ten salts have been characterized by X-ray diffraction analysis, IR, and elemental analysis, and the melting points of all the salts were also reported. And their structural and supramolecular aspects are fully analyzed. The result reveals that among the ten investigated crystals the ring N of the heterocycle or the NH2 in the aminophenol are protonated when the acids are deprotonated, and the crystal packing is interpreted in terms of the strong charge-assisted classical hydrogen bonds between the NH+/NH3+ and deprotonated acidic groups. Further analysis of the crystal packing of the salts indicated that a different family of additional CHsbnd O, CHsbnd Cl, CH3sbnd N, CH3sbnd O, CHsbnd Br, CH3sbnd Br, Brsbnd Cl, Clsbnd S, Osbnd S, Osbnd O, Brsbnd S, Hsbnd H, and π-π associations contribute to the stabilization and expansion of the total high-dimensional frameworks. For the coexistence of the various weak nonbonding interactions these structures adopted homo or hetero supramolecular synthons or both. Some classical

  9. Fast high-throughput method for the determination of acidity constants by capillary electrophoresis: I. Monoprotic weak acids and bases.

    Science.gov (United States)

    Fuguet, Elisabet; Ràfols, Clara; Bosch, Elisabeth; Rosés, Martí

    2009-04-24

    A new and fast method to determine acidity constants of monoprotic weak acids and bases by capillary zone electrophoresis based on the use of an internal standard (compound of similar nature and acidity constant as the analyte) has been developed. This method requires only two electrophoretic runs for the determination of an acidity constant: a first one at a pH where both analyte and internal standard are totally ionized, and a second one at another pH where both are partially ionized. Furthermore, the method is not pH dependent, so an accurate measure of the pH of the buffer solutions is not needed. The acidity constants of several phenols and amines have been measured using internal standards of known pK(a), obtaining a mean deviation of 0.05 pH units compared to the literature values.

  10. Kinetics of acid base catalyzed transesterification of Jatropha curcas oil.

    Science.gov (United States)

    Jain, Siddharth; Sharma, M P

    2010-10-01

    Out of various non-edible oil resources, Jatropha curcas oil (JCO) is considered as future feedstock for biodiesel production in India. Limited work is reported on the kinetics of transesterification of high free fatty acids containing oil. The present study reports the results of kinetic study of two-step acid base catalyzed transesterification process carried out at an optimum temperature of 65 °C and 50 °C for esterification and transesterification respectively under the optimum methanol to oil ratio of 3:7 (v/v), catalyst concentration 1% (w/w) for H₂SO₄ and NaOH. The yield of methyl ester (ME) has been used to study the effect of different parameters. The results indicate that both esterification and transesterification reaction are of first order with reaction rate constant of 0.0031 min⁻¹ and 0.008 min⁻¹ respectively. The maximum yield of 21.2% of ME during esterification and 90.1% from transesterification of pretreated JCO has been obtained.

  11. Spherical Nucleic Acids as Intracellular Agents for Nucleic Acid Based Therapeutics

    Science.gov (United States)

    Hao, Liangliang

    Recent functional discoveries on the noncoding sequences of human genome and transcriptome could lead to revolutionary treatment modalities because the noncoding RNAs (ncRNAs) can be applied as therapeutic agents to manipulate disease-causing genes. To date few nucleic acid-based therapeutics have been translated into the clinic due to challenges in the delivery of the oligonucleotide agents in an effective, cell specific, and non-toxic fashion. Unmodified oligonucleotide agents are destroyed rapidly in biological fluids by enzymatic degradation and have difficulty crossing the plasma membrane without the aid of transfection reagents, which often cause inflammatory, cytotoxic, or immunogenic side effects. Spherical nucleic acids (SNAs), nanoparticles consisting of densely organized and highly oriented oligonucleotides, pose one possible solution to circumventing these problems in both the antisense and RNA interference (RNAi) pathways. The unique three dimensional architecture of SNAs protects the bioactive oligonucleotides from unspecific degradation during delivery and supports their targeting of class A scavenger receptors and endocytosis via a lipid-raft-dependent, caveolae-mediated pathway. Owing to their unique structure, SNAs are able to cross cell membranes and regulate target genes expression as a single entity, without triggering the cellular innate immune response. Herein, my thesis has focused on understanding the interactions between SNAs and cellular components and developing SNA-based nanostructures to improve therapeutic capabilities. Specifically, I developed a novel SNA-based, nanoscale agent for delivery of therapeutic oligonucleotides to manipulate microRNAs (miRNAs), the endogenous post-transcriptional gene regulators. I investigated the role of SNAs involving miRNAs in anti-cancer or anti-inflammation responses in cells and in in vivo murine disease models via systemic injection. Furthermore, I explored using different strategies to construct

  12. Dynamical Approach to Multiequilibria Problems for Mixtures of Acids and Their Conjugated Bases

    Science.gov (United States)

    Glaser, Rainer E.; Delarosa, Marco A.; Salau, Ahmed Olasunkanmi; Chicone, Carmen

    2014-01-01

    Mathematical methods are described for the determination of steady-state concentrations of all species in multiequilibria systems consisting of several acids and their conjugated bases in aqueous solutions. The main example consists of a mixture of a diprotic acid H[subscript 2]A, a monoprotic acid HB, and their conjugate bases. The reaction…

  13. STUDY ON THE EFFECTS OF ACID ETCHING ON AFFECTED ENAMEL

    Directory of Open Access Journals (Sweden)

    Simona Stoleriu

    2011-12-01

    Full Text Available The purpose of the study was to establish and compare the effects of ortophosphoric and hydrochloric acids on the enamel affected by incipient carious lesions with different evolution. Materials and method. 20 teeth with acute and chronic non-cavitary carious lesions were considered for the study. The teeth were sectioned in two halves through the middle of the non-cavitary lesions. The halves of 5 white spot-type lesions and of 5 brown spot-type ones were analyzed as to their surface roughness, on an atomic force microscope (AFM. 5 halves with white spot-type lesions and 5 halves with brown spot-type ones were subjected to acid etching with 37% ortophosphoric acid (Scotchbond etchant gel, 3M ESPE, and an equal number of samples was subjected to the action of 15% hydrochloric acid (ICON-etch, DMG Dental Products Ltd for 2 min, then washed with water and analyzed by AFM. Results. The initial surface roughness of the enamel was higher in the white spot–type carious lesions, comparatively with the brown spot-type ones. For both types of carious non-cavitary lesions, acid etching with phosphoric and hydrochloric acid significantly increased the surface roughness of the enamel, comparatively with the status of the enamel surface prior to etching. The hydrochloric acid led to a surface roughness significantly higher than in the case of ortophosphoric acid, in both acute and chronic non-cavitary carious lesions. The roughness values obtained through etching with ortophosphoric and hydrochloric acid were higher in the white spot-type carious lesions, comparatively with the brown spot-type ones. Conclusions. Both the 37% ortophosphoric acid and the 15% hydrochloric acid determined a significantly higher surface roughness of the enamel affected by acute and chronic non-cavitary carious lesions. The surface condition of the brown spot-type carious lesions was less significantly modified, comparatively with that of the white spot-type lesions, by the

  14. Nucleic Acid-Based Therapy Approaches for Huntington's Disease

    Directory of Open Access Journals (Sweden)

    Tatyana Vagner

    2012-01-01

    Full Text Available Huntington's disease (HD is caused by a dominant mutation that results in an unstable expansion of a CAG repeat in the huntingtin gene leading to a toxic gain of function in huntingtin protein which causes massive neurodegeneration mainly in the striatum and clinical symptoms associated with the disease. Since the mutation has multiple effects in the cell and the precise mechanism of the disease remains to be elucidated, gene therapy approaches have been developed that intervene in different aspects of the condition. These approaches include increasing expression of growth factors, decreasing levels of mutant huntingtin, and restoring cell metabolism and transcriptional balance. The aim of this paper is to outline the nucleic acid-based therapeutic strategies that have been tested to date.

  15. [Diagnosis and treatment of disordered acid-base balance].

    Science.gov (United States)

    Kosch, M; Schaefer, R M

    2005-01-20

    Differential diagnosis in disordered acid-base homeostasis is usually possible by measuring the pH, pCO2, pO2 and bicarbonate concentration, and enables differentiation between respiratory alkalosis and acidosis, and metabolic alkalosis and acidosis. Compensatory counter-regulation (respiratory or renal) can make correct assessment of the primary disorder problematic. Treatment of the underlying disease, in particular the provision of adequate oxygenation in respiratory disorders is of the essence. In chronic forms of metabolic acidosis, for example in chronic renal insufficiency and elderly patients, bicarbonate substitution should be initiated in order to prevent the negative effects on various organ systems. Sodium bicarbonate formulations that can be assimilated from the small bowel are especially tolerable and suitable.

  16. Are carboxyl groups the most acidic sites in amino acids? Gas-phase acidities, photoelectron spectra, and computations on tyrosine, p-hydroxybenzoic acid, and their conjugate bases.

    Science.gov (United States)

    Tian, Zhixin; Wang, Xue-Bin; Wang, Lai-Sheng; Kass, Steven R

    2009-01-28

    Deprotonation of tyrosine in the gas phase was found to occur preferentially at the phenolic site, and the conjugate base consists of a 70:30 mixture of phenoxide and carboxylate anions at equilibrium. This result was established by developing a chemical probe for differentiating these two isomers, and the presence of both ions was confirmed by photoelectron spectroscopy. Equilibrium acidity measurements on tyrosine indicated that deltaG(acid)(o) = 332.5 +/- 1.5 kcal mol(-1) and deltaH(acid)(o) = 340.7 +/- 1.5 kcal mol(-1). Photoelectron spectra yielded adiabatic electron detachment energies of 2.70 +/- 0.05 and 3.55 +/- 0.10 eV for the phenoxide and carboxylate anions, respectively. The H/D exchange behavior of deprotonated tyrosine was examined using three different alcohols (CF3CH2OD, C6H5CH2OD, and CH3CH2OD), and incorporation of up to three deuterium atoms was observed. Two pathways are proposed to account for these results, and all of the experimental findings are supplemented with B3LYP/aug-cc-pVDZ and G3B3 calculations. In addition, it was found that electrospray ionization of tyrosine from a 3:1 (v/v) CH3OH/H2O solution using a commercial source produces a deprotonated [M-H]- anion with the gas-phase equilibrium composition rather than the structure of the ion that exists in aqueous media. Electrospray ionization from acetonitrile, however, leads largely to the liquid-phase (carboxylate) structure. A control molecule, p-hydroxybenzoic acid, was found to behave in a similar manner. Thus, the electrospray conditions that are employed for the analysis of a compound can alter the isomeric composition of the resulting anion.

  17. Microgel Tethering For Microarray-Based Nucleic Acid Diagnostics

    Science.gov (United States)

    Dai, Xiaoguang

    Molecular diagnostics (MDx) have radically changed the process of clinical microbial identification based on identifying genetic information, MDx approaches are both specific and fast. They can identify microbes to the species and strain level over a time scale that can be as short as one hour. With such information clinicians can administer the most effective and appropriate antimicrobial treatment at an early time point with substantial implications both for patient well-being and for easing the burden on the health-care system. Among the different MDx approaches, such as fluorescence in-situ hybridization, microarrays, next-generation sequencing, and mass spectrometry, point-of-care MDx platforms are drawing particular interest due to their low cost, robustness, and wide application. This dissertation develops a novel MDx technology platform capable of high target amplification and detection performance. For nucleic acid target detection, we fabricate an array of electron-beam-patterned microgels on a standard glass microscope slide. The microgels can be as small as a few hundred nanometers. The unique way of energy deposition during electron-beam lithography provides the microgels with a very diffuse water -gel interface that enables them to not only serve as substrates to immobilize DNA probes but do so while preserving them in a highly hydrated environment that optimizes their performance. Benefiting from the high spatial resolution provided by such techniques as position-sensitive microspotting and dip-pen nanolithography, multiple oligonucleotide probes known as molecular beacons (MBs) can be patterned on microgels. Furthermore, nucleic acid target amplification can be conducted in direct contact with the microgel-tethered detection array. Specifically, we use an isothermal RNA amplification reaction - nucleic acid sequence-based amplification (NASBA). ssRNA amplicons of from the NASBA reaction can directly hybridize with microgel-tethered MBs, and the

  18. Improved physical stability of amorphous state through acid base interactions.

    Science.gov (United States)

    Telang, Chitra; Mujumdar, Siddharthya; Mathew, Michael

    2009-06-01

    To investigate role of specific interactions in aiding formation and stabilization of amorphous state in ternary and binary dispersions of a weakly acidic drug. Indomethacin (IMC), meglumine (MU), and polyvinyl pyrollidone (PVP) were the model drug, base, and polymer, respectively. Dispersions were prepared using solvent evaporation. Physical mixtures were cryogenically coground. XRPD, PLM, DSC, TGA, and FTIR were used for characterization. MU has a high crystallization tendency and is characterized by a low T(g) (17 degrees C). IMC crystallization was inhibited in ternary dispersion with MU compared to IMC/PVP alone. An amorphous state formed readily even in coground mixtures. Spectroscopic data are indicative of an IMC-MU amorphous salt and supports solid-state proton transfer. IMC-MU salt displays a low T(g) approximately 50 degrees C, but is more physically stable than IMC, which in molecular mixtures with MU, resisted crystallization even when present in stoichiometric excess of base. This is likely due to a disrupted local structure of amorphous IMC due to specific interactions. IMC showed improved physical stability on incorporating MU in polymer, in spite of low T(g) of the base indicating that chemical interactions play a dominant role in physical stabilization. Salt formation could be induced thermally and mechanically.

  19. Approach to acid-base disorders – a clinical chemistry perspective

    African Journals Online (AJOL)

    Acid-base disorders are frequently encountered in clinical practice and have a significant impact on patient morbidity ... The first step in assessment of the arterial blood gas profile is .... amino acids in hyperalimentation are metabolised to HCl ...

  20. Methylene-bis[(aminomethyl)phosphinic acids]: synthesis, acid-base and coordination properties.

    Science.gov (United States)

    David, Tomáš; Procházková, Soňa; Havlíčková, Jana; Kotek, Jan; Kubíček, Vojtěch; Hermann, Petr; Lukeš, Ivan

    2013-02-21

    Three symmetrical methylene-bis[(aminomethyl)phosphinic acids] bearing different substituents on the central carbon atom, (NH(2)CH(2))PO(2)H-C(R(1))(R(2))-PO(2)H(CH(2)NH(2)) where R(1) = OH, R(2) = Me (H(2)L(1)), R(1) = OH, R(2) = Ph (H(2)L(2)) and R(1),R(2) = H (H(2)L(3)), were synthesized. Acid-base and complexing properties of the ligands were studied in solution as well as in the solid state. The ligands show unusually high basicity of the nitrogen atoms (log K(1) = 9.5-10, log K(2) = 8.5-9) if compared with simple (aminomethyl)phosphinic acids and, consequently, high stability constants of the complexes with studied divalent metal ions. The study showed the important role of the hydroxo group attached to the central carbon atom of the geminal bis(phosphinate) moiety. Deprotonation of the hydroxo group yields the alcoholate anion which tends to play the role of a bridging ligand and induces formation of polynuclear complexes. Solid-state structures of complexes [H(2)N=C(NH(2))(2)][Cu(2)(H(-1)L(2))(2)]CO(3)·10H(2)O and Li(2)[Co(4)(H(-1)L(1))(3)(OH)]·17.5H(2)O were determined by X-ray diffraction. The complexes show unexpected geometries forming dinuclear and cubane-like structures, respectively. The dinuclear copper(II) complex contains a bridging μ(2)-alcoholate group with the (-)O-P(=O)-CH(2)-NH(2) fragments of each ligand molecule chelated to the different central ion. In the cubane cobalt(II) complex, one μ(3)-hydroxide and three μ(3)-alcoholate anions are located in the cube vertices and both phosphinate groups of one ligand molecule are chelating the same cobalt(II) ion while each of its amino groups are bound to different neighbouring metal ions. All such three metal ions are bridged by the alcoholate group of a given ligand.

  1. Amino acid-bile acid based molecules: extremely narrow surfactant nanotubes formed by a phenylalanine-substituted cholic acid.

    Science.gov (United States)

    Travaglini, Leana; D'Annibale, Andrea; Schillén, Karin; Olsson, Ulf; Sennato, Simona; Pavel, Nicolae V; Galantini, Luciano

    2012-12-21

    An amino acid-substituted bile acid forms tubular aggregates with inner and outer diameters of about 3 and 6 nm. The diameters are unusually small for surfactant self-assembled tubes. The results enhance the spectrum of applications of supramolecular tubules and open up possibilities for investigating a novel class of biological amphiphiles.

  2. Effect of roxatidine acetate on daytime and night-time peptone-stimulated gastric acid secretion.

    Science.gov (United States)

    Hagenmüller, F

    1988-01-01

    A double-blind, randomised, crossover study in 12 healthy volunteers was performed to assess the effects of roxatidine acetate 75 mg or placebo administered at 8 am and 9 pm on peptone-stimulated hydrochloric acid secretion. In comparison to placebo, roxatidine acetate produced an average reduction of daytime hydrochloric acid output of 86% and 32%, respectively, for the 4- to 6-hour and 10- to 12-hour post-drug administration phases. In addition, roxatidine acetate produced reductions in nocturnal hydrochloric acid output of 75 to 92% with an associated rise in intragastric pH of around 2 units compared to placebo. No side effects or clinically significant alterations in haematological or biochemical values were reported following roxatidine acetate administration. These results suggest that roxatidine acetate is a potent and effective inhibitor of day and night-time intragastric acid secretion.

  3. Thermochemical study of the reactions of acid-base interaction in an aqueous solution of α-aminobutyric acid

    Science.gov (United States)

    Lytkin, A. I.; Chernikov, V. V.; Krutova, O. N.; Skvortsov, I. A.; Korchagina, A. S.

    2017-01-01

    The heat effects of the interaction between a solution of α-aminobutyric acid and solutions of HNO3 and KOH are measured by means of calorimetry in different ranges of pH at 298.15 K and values of ionic strength of 0.25, 0.5, and 0.75 (KNO3). The heat effects of the stepwise dissociation of the amino acid are determined. Standard thermodynamic characteristics (Δr H 0, Δr G 0, and Δr S 0) of the reactions of acid-base interaction in aqueous solutions of α-aminobutyric acid are calculated. The connection between the thermodynamic characteristics of the dissociation of the amino acid and the structure of this compound is considered.

  4. Unimolecular half-adders and half-subtractors based on acid-base reaction

    Institute of Scientific and Technical Information of China (English)

    Wei JIANG; Hengyi ZHANG; Yu LIU

    2009-01-01

    According to the structural analysis of reported mole-cular processors with acids and bases as inputs, we proposed a general method for constructing molecular half-adders and/or half-subtractors based on acid-base reaction. The method is preliminarily supported by four molecular processors (8-hydroxyquinoline, 4-hydroxypyridine, 4-aminophenol and 5-amino-1-naphthol) capable of the elementary addition and/or subtraction algebraic operations. Noticeably, 8-hydroxyquinoline can mimic the functions of three logic devices, i.e. half-adder, half-subtractor and digital comparator, by the use of superposition and reconfi-guration. The method described in this paper may be useful not only for designing new unimolecular arithmetical processors with the same inputs and outputs as standard devices for the construction of future molecular computers, but it can also help us disclose the simplest molecules and biomolecules with computational properties concealed around us.

  5. Electrospun poly(lactic acid) based conducting nanofibrous networks

    Energy Technology Data Exchange (ETDEWEB)

    Patra, S N; Bhattacharyya, D [Department of Mechanical Engineering, Centre for Advanced Composite Materials, University of Auckland, Private Bag 92019, Auckland (New Zealand); Ray, S; Easteal, A J, E-mail: d.bhattacharyya@auckland.ac.nz [Department of Chemistry, Centre for Advanced Composite Materials, University of Auckland, Private Bag 92019, Auckland (New Zealand)

    2009-08-15

    Multi-functionalised micro/nanostructures of conducting polymers in neat or blended forms have received much attention because of their unique properties and technological applications in electrical, magnetic and biomedical devices. Biopolymer-based conducting fibrous mats are of special interest for tissue engineering because they not only physically support tissue growth but also are electrically conductive, and thus are able to stimulate specific cell functions or trigger cell responses. They are effective for carrying current in biological environments and can thus be considered for delivering local electrical stimuli at the site of damaged tissue to promote wound healing. Electrospinning is an established way to process polymer solutions or melts into continuous fibres with diameter often in the nanometre range. This process primarily depends on a number of parameters, including the type of polymer, solution viscosity, polarity and surface tension of the solvent, electric field strength and the distance between the spinneret and the collector. The present research has included polyaniline (PANi) as the conducting polymer and poly(L-lactic acid) (PLLA) as the biopolymer. Dodecylbenzene sulphonic acid (DBSA) doped PANi and PLLA have been dissolved in a common solvent (mixtures of chloroform and dimethyl formamide (DMF)), and the solutions successfully electrospun. DMF enhanced the dielectric constant of the solvent, and tetra butyl ammonium bromide (TBAB) was used as an additive to increase the conductivity of the solution. DBSA-doped PANi/PLLA mat exhibits an almost bead-free network of nanofibres that have extraordinarily smooth surface and diameters in the range 75 to 100 nm.

  6. Electrospun poly(lactic acid) based conducting nanofibrous networks

    Science.gov (United States)

    Patra, S. N.; Bhattacharyya, D.; Ray, S.; Easteal, A. J.

    2009-08-01

    Multi-functionalised micro/nanostructures of conducting polymers in neat or blended forms have received much attention because of their unique properties and technological applications in electrical, magnetic and biomedical devices. Biopolymer-based conducting fibrous mats are of special interest for tissue engineering because they not only physically support tissue growth but also are electrically conductive, and thus are able to stimulate specific cell functions or trigger cell responses. They are effective for carrying current in biological environments and can thus be considered for delivering local electrical stimuli at the site of damaged tissue to promote wound healing. Electrospinning is an established way to process polymer solutions or melts into continuous fibres with diameter often in the nanometre range. This process primarily depends on a number of parameters, including the type of polymer, solution viscosity, polarity and surface tension of the solvent, electric field strength and the distance between the spinneret and the collector. The present research has included polyaniline (PANi) as the conducting polymer and poly(L-lactic acid) (PLLA) as the biopolymer. Dodecylbenzene sulphonic acid (DBSA) doped PANi and PLLA have been dissolved in a common solvent (mixtures of chloroform and dimethyl formamide (DMF)), and the solutions successfully electrospun. DMF enhanced the dielectric constant of the solvent, and tetra butyl ammonium bromide (TBAB) was used as an additive to increase the conductivity of the solution. DBSA-doped PANi/PLLA mat exhibits an almost bead-free network of nanofibres that have extraordinarily smooth surface and diameters in the range 75 to 100 nm.

  7. Solution influence on biomolecular equilibria - Nucleic acid base associations

    Science.gov (United States)

    Pohorille, A.; Pratt, L. R.; Burt, S. K.; Macelroy, R. D.

    1984-01-01

    Various attempts to construct an understanding of the influence of solution environment on biomolecular equilibria at the molecular level using computer simulation are discussed. First, the application of the formal statistical thermodynamic program for investigating biomolecular equilibria in solution is presented, addressing modeling and conceptual simplications such as perturbative methods, long-range interaction approximations, surface thermodynamics, and hydration shell. Then, Monte Carlo calculations on the associations of nucleic acid bases in both polar and nonpolar solvents such as water and carbon tetrachloride are carried out. The solvent contribution to the enthalpy of base association is positive (destabilizing) in both polar and nonpolar solvents while negative enthalpies for stacked complexes are obtained only when the solute-solute in vacuo energy is added to the total energy. The release upon association of solvent molecules from the first hydration layer around a solute to the bulk is accompanied by an increase in solute-solvent energy and decrease in solvent-solvent energy. The techniques presented are expectd to displace less molecular and more heuristic modeling of biomolecular equilibria in solution.

  8. Effect of casein-based semi-synthetic food on renal acid excretion and acid-base state of blood in dogs.

    Science.gov (United States)

    Zijlstra, W G; Langbroek, A J; Kraan, J; Rispens, P; Nijmeijer, A

    1995-01-01

    Urinary acid excretion and blood acid-base state were determined in dogs fed a casein-based semi-synthetic food (SSF), to which different amounts of salts had been added, in comparison with feeding normal dog food. Net acid excretion (NAE) and inorganic acid excretion (IAE) increased during SSF feeding. IAE was higher than the acid load calculated from the sulphur and phosphorus content of the casein. This higher IAE appeared to be due to the presence of calcium and magnesium phosphate in the diet, because calcium and magnesium may be in part precipitated as carbonate, leaving phosphate to be absorbed as phosphoric acid. Acid excretion decreased by addition of CaO. When no neutral Na+ and K+ salts were added, the increase in NAE was accompanied by a metabolic acidosis. K+ was more effective in attenuating the acidosis than Na+. On the basis of these findings a diet can be made which imposes a known acid load, and provides stable baseline values. Hence, any additions that influence the acid-base balance can be properly studied. The data obtained in these and future studies utilising this diet may be of help in optimising the composition of nutrient solutions to be used in the care of critically ill patients.

  9. Chemical polymerization of aniline in phenylphosphinic acid

    Directory of Open Access Journals (Sweden)

    NICOLETA PLESU

    2005-10-01

    Full Text Available The chemical polymerization of aniline was performed in phenylphosphinic acid (APP medium using ammonium peroxidisulfate as the oxidizing agent, at 0 ºC and 25 ºC. The yield of polyaniline (PANI was about 60–69 %. The polymerization process required an induction time 8–10 times greater than in other acids (hydrochloric, sulfuric. The average density of the obtained polymer was 1.395 g cm-3 for PANI-salt and 1.203 g cm-3 for PANI-base. The acid capacity of PANI depends on the synthesis parameters and the maximum value was 15.02 meq/g polymer. The inherent viscosity of PANI was 0.662 dl/g at aniline/oxidant molar ratios >2 and 0 ºC. The oxidation state was a function of the synthesis parameters and lay between 0.553–0.625, as determined from UV-VIS and titration with TiCl3 data. The PANI samples were characterized by measurements of their density, inherent viscosity, conductivity, acid capacity, FTIR and UV-VIS spectrum, and thermogravimetric data.

  10. An elementary derivation of the hard/soft-acid/base principle.

    Science.gov (United States)

    Ayers, Paul W

    2005-04-08

    The hard/soft-acid/base (HSAB) principle indicates that hard acids prefer binding to hard bases (often forming bonds with substantial ionic character) while soft acids prefer binding to soft bases (often forming bonds with substantial covalent character). Though the HSAB principle is a foundational concept of the modern theory of acids and bases, the theoretical underpinnings of the HSAB principle remain murky. This paper examines the exchange reaction, wherein two molecules, one the product of reacting a hard acid and a soft base and the other the product of reacting a soft acid with a hard base, exchange substituents to form the preferred hard-hard and soft-soft product. A simple derivation shows that this reaction is exothermic, proving the validity of the HSAB principle. The analysis leads to the simple and conceptually appealing conclusion that the HSAB principle is a driven by simple electron transfer effects.

  11. Design and characterization of auxotrophy-based amino acid biosensors.

    Directory of Open Access Journals (Sweden)

    Felix Bertels

    Full Text Available Efficient and inexpensive methods are required for the high-throughput quantification of amino acids in physiological fluids or microbial cell cultures. Here we develop an array of Escherichia coli biosensors to sensitively quantify eleven different amino acids. By using online databases, genes involved in amino acid biosynthesis were identified that - upon deletion - should render the corresponding mutant auxotrophic for one particular amino acid. This rational design strategy suggested genes involved in the biosynthesis of arginine, histidine, isoleucine, leucine, lysine, methionine, phenylalanine, proline, threonine, tryptophan, and tyrosine as potential genetic targets. A detailed phenotypic characterization of the corresponding single-gene deletion mutants indeed confirmed that these strains could neither grow on a minimal medium lacking amino acids nor transform any other proteinogenic amino acid into the focal one. Site-specific integration of the egfp gene into the chromosome of each biosensor decreased the detection limit of the GFP-labeled cells by 30% relative to turbidometric measurements. Finally, using the biosensors to determine the amino acid concentration in the supernatants of two amino acid overproducing E. coli strains (i.e. ΔhisL and ΔtdcC both turbidometrically and via GFP fluorescence emission and comparing the results to conventional HPLC measurements confirmed the utility of the developed biosensor system. Taken together, our study provides not only a genotypically and phenotypically well-characterized set of publicly available amino acid biosensors, but also demonstrates the feasibility of the rational design strategy used.

  12. Improving Pharmacy Students' Understanding and Long-term Retention of Acid-Base Chemistry

    OpenAIRE

    Roche, Victoria F.

    2007-01-01

    Despite repeated exposure to the principles underlying the behavior of organic acids and bases in aqueous solution, some pharmacy students remain confused about the topic of acid-base chemistry. Since a majority of organic drug molecules have acid-base character, the ability to predict their reactivity and the extent to which they will ionize in a given medium is paramount to students' understanding of essentially all aspects of drug action in vivo and in vitro. This manuscript presents a med...

  13. The coulometric titration of acids and bases in m-cresol medium

    NARCIS (Netherlands)

    Bos, M.; Dahmen, E.A.M.F.

    1974-01-01

    A method is described for the coulometric titration of acids and bases in the solvent m-cresol. The method is suitable for bases with pKa values greater than 11 in m-cresol, or for acids with pKa values below 13 in m-cresol. Amounts of 5–50 μeq of acid or base can be determined with a relative

  14. A Comparison of Different Teaching Designs of "Acids and Bases" Subject

    Science.gov (United States)

    Ültay, Neslihan; Çalik, Muammer

    2016-01-01

    Inability to link the acid-base concepts with daily life phenomena (as contexts) highlights the need for further research on the context-based acid-base chemistry. In this vein, the aim of this study is to investigate the effects of different teaching designs (REACT strategy, 5Es learning model and traditional (existing) instruction) relevant with…

  15. A Comparison of Different Teaching Designs of "Acids and Bases" Subject

    Science.gov (United States)

    Ültay, Neslihan; Çalik, Muammer

    2016-01-01

    Inability to link the acid-base concepts with daily life phenomena (as contexts) highlights the need for further research on the context-based acid-base chemistry. In this vein, the aim of this study is to investigate the effects of different teaching designs (REACT strategy, 5Es learning model and traditional (existing) instruction) relevant with…

  16. Co- and Terpolyesters based on isosorbide and succinic acid for coating applications : synthesis and characterization

    NARCIS (Netherlands)

    Noordover, B.A.J.; Staalduinen, van V.G.; Duchateau, R.; Koning, C.E.; Benthem, van R.A.T.M.; Mak, M.; Heise, A.; Frissen, A.E.; Haveren, van J.

    2006-01-01

    Co- and terpolyesters based on succinic acid and isosorbide in combination with other renewable monomers such as 2,3-butanediol, 1,3-propanediol, and citric acid were synthesized and characterized. Linear polyesters were obtained via melt polycondensation of nonactivated dicarboxylic acids with OH f

  17. Deactivation of vanadia-based commercial SCR catalysts by polyphosphoric acids

    DEFF Research Database (Denmark)

    Castellino, Francesco; Rasmussen, Søren Birk; Jensen, Anker Degn;

    2008-01-01

    Commercial vanadia-based SCR monoliths have been exposed to flue gases in a pilot-scale Setup into which phosphoric acid has been added and the deactivation has been followed during the exposure time. Separate measurements by SMPS showed that the phosphoric acid formed polyphosphoric acid aerosol...

  18. [Development of Nucleic Acid-Based Adjuvant for Cancer Immunotherapy].

    Science.gov (United States)

    Kobiyama, Kouji; Ishii, Ken J

    2015-09-01

    Since the discovery of the human T cell-defined tumor antigen, the cancer immunotherapy field has rapidly progressed, with the research and development of cancer immunotherapy, including cancer vaccines, being conducted actively. However, the disadvantages of most cancer vaccines include relatively weak immunogenicity and immune escape or exhaustion. Adjuvants with innate immunostimulatory activities have been used to overcome these issues, and these agents have been shown to enhance the immunogenicity of cancer vaccines and to act as mono-therapeutic anti-tumor agents. CpG ODN, an agonist for TLR9, is one of the promising nucleic acid-based adjuvants, and it is a potent inducer of innate immune effector functions. CpG ODN suppresses tumor growth in the absence of tumor antigens and peptide administration. Therefore, CpG ODN is expected to be useful as a cancer vaccine adjuvant as well as a cancer immunotherapy agent. In this review, we discuss the potential therapeutic applications and mechanisms of CpG ODN for cancer immunotherapy.

  19. The Acid-Base balance history (Part I

    Directory of Open Access Journals (Sweden)

    Mario Tarantino

    2007-08-01

    Full Text Available In the History of Medicine, the Acid-Base balance is unusual in that it has undergone constant evolution, not merely and not so much as a result of the progress of knowledge in physiological and physiopathological and clinical fields - which is common to all fields of Medical Science, but rather in relation to its very biochemical foundations, as was demonstrated by P. Stewart’s recent critical review and the reviews of J. Corey and J.A. Kellum, which are still valid today - and this is rather unusual. Although it started centuries ago, the history of the acidbase balance has experienced a slow and difficult evolution, and modern concepts almost exploded a couple of decades into the 20th century. It is therefore with even greater wonder and admiration that we look back on the pioneering intuitions of scholars such as R. Boyle, J.B. van Helmont and A.L. Lavoisier, to mention but a few of the scientists who laid the foundations for current knowledge in this fascinating chapter of physiology and clinical practice that belongs transversally to all medical and clinical disciplines.

  20. Hyaluronic Acid Based Hydrogels for Regenerative Medicine Applications

    Directory of Open Access Journals (Sweden)

    Assunta Borzacchiello

    2015-01-01

    Full Text Available Hyaluronic acid (HA hydrogels, obtained by cross-linking HA molecules with divinyl sulfone (DVS based on a simple, reproducible, and safe process that does not employ any organic solvents, were developed. Owing to an innovative preparation method the resulting homogeneous hydrogels do not contain any detectable residual cross-linking agent and are easier to inject through a fine needle. HA hydrogels were characterized in terms of degradation and biological properties, viscoelasticity, injectability, and network structural parameters. They exhibit a rheological behaviour typical of strong gels and show improved viscoelastic properties by increasing HA concentration and decreasing HA/DVS weight ratio. Furthermore, it was demonstrated that processes such as sterilization and extrusion through clinical needles do not imply significant alteration of viscoelastic properties. Both SANS and rheological tests indicated that the cross-links appear to compact the network, resulting in a reduction of the mesh size by increasing the cross-linker amount. In vitro degradation tests of the HA hydrogels demonstrated that these new hydrogels show a good stability against enzymatic degradation, which increases by increasing HA concentration and decreasing HA/DVS weight ratio. Finally, the hydrogels show a good biocompatibility confirmed by in vitro tests.