WorldWideScience

Sample records for hydrocarbons separating condensed

  1. The use of coarse, separable, condensed-phase organic carbon particles to characterize desorption resistance of polycyclic aromatic hydrocarbons in contaminated sediments

    Energy Technology Data Exchange (ETDEWEB)

    Chai, Y.Z.; Kochetkov, A.; Reible, D.D. [University of Texas, Austin, TX (United States)

    2007-07-15

    Physical separations were employed to characterize the source of desorption-resistant behavior for polycyclic aromatic hydrocarbons (PAHs) in laboratory- and field-contaminated sediments. Size and density separation of laboratory-contaminated sediments did not effectively separate the amorphous-phase (volatile) and condensed-phase (nonvolatile) organic carbon as measured by thermal oxidation at 375 {sup o}C. These separations also did not result in sediment fractions with significantly different desorption characteristics as measured by apparent partition coefficients. Coarse particles from a field-contaminated sediment from Utica Harbor (UH; Utica, NY, USA), however, could be directly separated into sandy fractions and organic fractions that were composed of woody organic matter, charcoal or charred vegetative matter, and coal-like and coal-cinder particles. Chemical analysis showed that coal-like (glassy, nonporous) and coal-cinder (porous, sintered) particles exhibited very high PAH concentrations and high apparent partition coefficients. These particles also exhibited significantly higher condensed-phase (nonvolatile) organic carbon contents as defined by thermal oxidation at 375{sup o}C. The apparent partition coefficients of PAHs in the coal-cinder particles were a good indication of the apparent partition coefficients in the desorption-resistant fraction of UH sediment, indicating that the coarse particles provided a reasonable characterization of the desorption-resistance phenomena in these sediments even though the coarse fractions represented less than 25% of the organic carbon in the whole sediment.

  2. The use of coarse, separable, condensed-phase organic carbon particles to characterize desorption resistance of polycyclic aromatic hydrocarbons in contaminated sediments.

    Science.gov (United States)

    Chai, Yunzhou; Kochetkov, Alexander; Reible, Danny D

    2007-07-01

    Physical separations were employed to characterize the source of desorption-resistant behavior for polycyclic aromatic hydrocarbons (PAHs) in laboratory- and field-contaminated sediments. Size and density separation of laboratory-contaminated sediments did not effectively separate the amorphous-phase (volatile) and condensed-phase (nonvolatile) organic carbon as measured by thermal oxidation at 375 degrees C. These separations also did not result in sediment fractions with significantly different desorption characteristics as measured by apparent partition coefficients. Coarse particles from a field-contaminated sediment from Utica Harbor (UH; Utica, NY, USA), however, could be directly separated into sandy fractions and organic fractions that were composed of woody organic matter, charcoal or charred vegetative matter, and coal-like and coal-cinder particles. Chemical analysis showed that coal-like (glassy, nonporous) and coal-cinder (porous, sintered) particles exhibited very high PAH concentrations and high apparent partition coefficients. These particles also exhibited significantly higher condensed-phase (nonvolatile) organic carbon contents as defined by thermal oxidation at 375 degrees C. The apparent partition coefficients of PAHs in the coal-cinder particles were a good indication of the apparent partition coefficients in the desorption-resistant fraction of UH sediment, indicating that the coarse particles provided a reasonable characterization of the desorption-resistance phenomena in these sediments even though the coarse fractions represented less than 25% of the organic carbon in the whole sediment.

  3. Membrane separation of hydrocarbons

    Science.gov (United States)

    Chang, Y. Alice; Kulkarni, Sudhir S.; Funk, Edward W.

    1986-01-01

    Mixtures of heavy oils and light hydrocarbons may be separated by passing the mixture through a polymeric membrane. The membrane which is utilized to effect the separation comprises a polymer which is capable of maintaining its integrity in the presence of hydrocarbon compounds and which has been modified by being subjected to the action of a sulfonating agent. Sulfonating agents which may be employed will include fuming sulfuric acid, chlorosulfonic acid, sulfur trioxide, etc., the surface or bulk modified polymer will contain a degree of sulfonation ranging from about 15 to about 50%. The separation process is effected at temperatures ranging from about ambient to about 100.degree. C. and pressures ranging from about 50 to about 1000 psig.

  4. Hydrocarbon and HCN Condensation in the Atmosphere of Pluto

    Science.gov (United States)

    Fan, S.; Gao, P.; Limpasuvan, D. L.; Willacy, K.; Yung, Y. L.

    2016-12-01

    Observations by the New Horizons spacecraft revealed the presence of haze in the Pluto atmosphere, which have been shown by microphysical models to be likely composed of fractal aggregates originating from CH4 photolysis and subsequent polymerization of higher hydrocarbons. However, temperatures in the Pluto atmosphere are such that higher hydrocarbons, such as C2H2, C2H4, C2H6, as we well as HCN, should condense, possibly onto the fractal aggregate haze particles. This process can change their shape, as well as their optical properties. We use a modified microphysical model to investigate the characteristics of haze particles as C2 hydrocarbons and HCN condense on them during their sedimentation through the atmosphere. The composition of the particles as a function of altitude can in turn inform the interpretation of New Horizons observations. In addition, we use the condensation rates from the microphysics model to augment the photochemical model that calculates the concentrations of C2 hydrocarbons and HCN to ensure self-consistency.

  5. Gaseous Hydrocarbon Separations Using Functionalized Ionic Liquids

    OpenAIRE

    2016-01-01

    The functionalization of the side chains on the cation or the anion of an ionic liquid is a common approach to tailor its properties for different processes including the separation of gases. In this paper, we present the current state of the art concerning the usage of ionic liquids for hydrocarbon separations. We also show how the functionalization of ionic liquids or the appropriate anion/cation combinations can contribute to the increase of the performance of the ionic liquids for the sep...

  6. Gaseous Hydrocarbon Separations Using Functionalized Ionic Liquids

    Directory of Open Access Journals (Sweden)

    Moura Leila

    2016-03-01

    Full Text Available The functionalization of the side chains on the cation or the anion of an ionic liquid is a common approach to tailor its properties for different processes including the separation of gases. In this paper, we present the current state of the art concerning the usage of ionic liquids for hydrocarbon separations. We also show how the functionalization of ionic liquids or the appropriate anion/cation combinations can contribute to the increase of the performance of the ionic liquids for the separation of gaseous hydrocarbons – either by improving the capacity of the ionic liquid to absorb a given gas or by increasing the selectivity towards a particular hydrocarbon. Original results concerning the usage of olefin-complexing metal salts of lithium (I, nickel (II and copper (II dissolved in ionic liquids for selectively absorbing light olefins are presented. It is observed that the absorption capacity of an imidazolium-based ionic liquid is doubled by the addition of a copper (II salt. This result is compared with the effect of the functionalization of the ionic liquid and the advantages and difficulties of the two approaches are analyzed.

  7. Recent developments in hydrocarbon separator interface imaging

    Science.gov (United States)

    Hjertaker, Bjorn T.; Johansen, Geir A.; Jackson, Peter

    2001-02-01

    Level monitoring instrumentation is an essential part of hydrocarbon processing facilities, and has together with separator technology been widely addressed over the last decade. Key issues are production capacity, product enhancement and well-flow control. The reliability and accuracy of the level instrumentation, and its ability to monitor the thickness of the foam and the oil-water emulsion, are particularly important when considering the level instrumentation as the main sensing element in the automatic control of the separation vessel. Lately industry focus has been placed on optimal automatic control to improve the quality of the production output, and to minimize the use of expensive and environmentally undesirable separation enhancing chemicals. Recent developments in hydrocarbon production includes subsea separation stations, where the constraints placed on the reliability and accuracy of the level instrumentation are especially severe. This paper discuss the most common existing level monitoring technologies, and present some recent level monitoring developments for three-phase separators. In order to clarify the issue of cross sectional metering the notion tomometry is introduced in this paper. Tomometry denotes multipoint cross sectional metering aiming to acquire cross sectional information on the distribution of the substances in the process vessel for control purposes, not mainly to create a cross sectional reconstructed image of the process in question.

  8. Separation of C/sub 3+/ hydrocarbons by absorption and rectification

    Energy Technology Data Exchange (ETDEWEB)

    Sapper, R.

    1989-02-21

    A process for separation of C/sub 3+/ hydrocarbons from natural gas and the like comprises subjecting the gas under pressure to partial condensation under cooling, separating the uncondensed gaseous phase and engine expanding same while the condensed liquid fraction is subjected to rectification. Additional C/sub 3+/ hydrocarbons are separated from the engine expanded gaseous fraction by a scrubbing step. The loaded scrubbing agent is preferably fed to the rectification column, while the unabsorbed gaseous fraction coming from the scrubbing step is preferably heated and delivered as a product stream containing C/sub 2-/ hydrocarbons. In a preferred embodiment of the invention, scrubbing is conducted at a higher pressure than rectification, for example, about 10 to 20 bar higher than the rectification pressure. This proves to be especially advantageous if the C/sub 2-/ fraction is to be delivered under energy-intensive recompression is required. The scrubbing step is preferably performed with a liquid hydrocarbon mixture derived from the process itself, although other scrubbing agents, particularly other liquid hydrocarbon mixtures, are suitable. In a particularly preferred embodiment of the invention, the scrubbing is conducted with a scrubbing agent obtained by partial condensation of the residual gas from the rectification column. In another preferred embodiment of the invention, the partial condensation of the residual gas is conducted by heat exchange with the evaporating bottoms product from the scrubbing step. 1 fig.

  9. Process for the separation of C sub 2 hydrocarbons from natural gas

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, H.; Sapper, R.

    1990-08-21

    A process for the separation of C{sub 2+} hydrocarbons from natural gas under pressure is disclosed, in which the natural gas is cooled, partially condensed, and separated into a liquid fraction and a gaseous fraction. The liquid fraction is subcooled and then expanded into the upper zone of a rectifying column. The gaseous fraction, after engine expansion, is also introduced into the rectifying column. During rectification, a product stream containing essentially C{sub 2+} hydrocarbons and a residual gas stream containing predominantly lower-boiling components are obtained. The residual gas stream is initially heated by heat exchange with the liquid fraction and then heated by heat exchange with the gaseous fraction obtained after partial condensation. The residual gas stream is then further heated by heat exchange with the feed stream of natural gas to be partially condensed. The heated residual gas is then engine expanded and reheated again by heat exchange with the feed stream of natural gas to be partially condensed.

  10. Sustainable Separations of C4 -Hydrocarbons by Using Microporous Materials.

    Science.gov (United States)

    Gehre, Mascha; Guo, Zhiyong; Rothenberg, Gadi; Tanase, Stefania

    2017-06-15

    Petrochemical refineries must separate hydrocarbon mixtures on a large scale for the production of fuels and chemicals. Typically, these hydrocarbons are separated by distillation, which is extremely energy intensive. This high energy cost can be mitigated by developing materials that can enable efficient adsorptive separation. In this critical review, the principles of adsorptive separation are outlined, and then the case for C4 separations by using zeolites and metal-organic frameworks (MOFs) is examined. By analyzing both experimental and theoretical studies, the challenges and opportunities in C4 separation are outlined, with a focus on the separation mechanisms and structure-selectivity correlations. Zeolites are commonly used as adsorbents and, in some cases, can separate C4 mixtures well. The pore sizes of eight-membered-ring zeolites, for example, are in the order of the kinetic diameters of C4 isomers. Although zeolites have the advantage of a rigid and highly stable structure, this is often difficult to functionalize. MOFs are attractive candidates for hydrocarbon separation because their pores can be tailored to optimize the adsorbate-adsorbent interactions. MOF-5 and ZIF-7 show promising results in separating all C4 isomers, but breakthrough experiments under industrial conditions are needed to confirm these results. Moreover, the flexibility of the MOF structures could hamper their application under industrial conditions. Adsorptive separation is a promising viable alternative and it is likely to play an increasingly important role in tomorrow's refineries. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Calculation of hydrocarbon-in-place in gas and gas-condensate reservoirs - Carbon dioxide sequestration

    Science.gov (United States)

    Verma, Mahendra K.

    2012-01-01

    The Energy Independence and Security Act of 2007 (Public Law 110-140) authorized the U.S. Geological Survey (USGS) to conduct a national assessment of geologic storage resources for carbon dioxide (CO2), requiring estimation of hydrocarbon-in-place volumes and formation volume factors for all the oil, gas, and gas-condensate reservoirs within the U.S. sedimentary basins. The procedures to calculate in-place volumes for oil and gas reservoirs have already been presented by Verma and Bird (2005) to help with the USGS assessment of the undiscovered resources in the National Petroleum Reserve, Alaska, but there is no straightforward procedure available for calculating in-place volumes for gas-condensate reservoirs for the carbon sequestration project. The objective of the present study is to propose a simple procedure for calculating the hydrocarbon-in-place volume of a condensate reservoir to help estimate the hydrocarbon pore volume for potential CO2 sequestration.

  12. Quark Mass Correction to Chiral Separation Effect and Pseudoscalar Condensate

    CERN Document Server

    Guo, Er-dong

    2016-01-01

    We derived an analytic structure of the quark mass correction to chiral separation effect (CSE) in small mass regime. We confirmed this structure by a D3/D7 holographic model study in a finite density, finite magnetic field background. The quark mass correction to CSE can be related to correlators of pseudo-scalar condensate, quark number density and quark condensate in static limit. We found scaling relations of these correlators with spatial momentum in the small momentum regime. They characterize medium responses to electric field, inhomogeneous quark mass and chiral shift. Beyond the small momentum regime, we found existence of normalizable mode, which possibly leads to formation of spiral phase. The normalizable mode exists beyond a critical magnetic field, whose magnitude decreases with quark chemical potential.

  13. Quantification of 16 polycyclic aromatic hydrocarbons in cigarette smoke condensate using stable isotope dilution liquid chromatography with atmospheric-pressure photoionization tandem mass spectrometry.

    Science.gov (United States)

    Zhang, Xiaotao; Hou, Hongwei; Chen, Huan; Liu, Yong; Wang, An; Hu, Qingyuan

    2015-09-17

    A stable isotope dilution liquid chromatography with tandem mass spectrometry method for the analysis of 16 polycyclic aromatic hydrocarbons in cigarette smoke condensate was developed and validated. Compared with previously reported methods, this method has lower limits of detection (0.04-1.35 ng/cig). Additionally, the proposed method saves time, reduces the number of separation steps, and reduces the quantity of solvent needed. The new method was applied to evaluate polycyclic aromatic hydrocarbon content in 213 commercially available cigarettes in China, under the International Standardization Organization smoking regime and the Health Canadian intense smoking regime. The results showed that the total polycyclic aromatic hydrocarbon content was more than two times higher in samples from the Health Canadian intense smoking regime than in samples from the International Standardization Organization smoking regime (1189.23 vs. 2859.50 ng/cig, ppolycyclic aromatic hydrocarbons (and total polycyclic aromatic hydrocarbons) increased with labeled tar content in both of the tested smoking regimes. There was a positive correlation between total polycyclic aromatic hydrocarbons under the International Standardization Organization smoking regime with that under the Health Canadian intense smoking regime. The proposed liquid chromatography with tandem mass spectrometry method is satisfactory for the rapid, sensitive, and accurately quantitative evaluation of polycyclic aromatic hydrocarbon content in cigarette smoke condensate, and it can be applied to assess potential health risks from smoking. This article is protected by copyright. All rights reserved.

  14. Poster 4: Investigating the first steps of hydrocarbon condensation in the laboratory and in Titan's atmosphere

    Science.gov (United States)

    Biennier, Ludovic; Bourgalais, Jeremy; Benidar, Abdessamad; Le Picard, Sebastien

    2016-06-01

    Hydrocarbons formed in Titan's cold atmosphere, starting with ethane C2H6, ethylene C2H4, acetylene C2H2, propane C3H8,... up to benzene C6H6, play some role in aerosol production, cloud processes, rain generation and Titan's lakes formation. We have started to study in the laboratory the kinetics of the first steps of condensation of these hydrocarbons. Rate coefficients are very sensitive to the description of the potential interaction surfaces of the molecules involved. Combined theoretical and experimental studies at the molecular level of the homogenous nucleation of various small molecules should improve greatly our fundamental understanding. This knowledge will serve as a model for studying more complex nucleation processes actually taking places in planetary atmospheres. Here we present the first experimental kinetic study of the dimerization of two small hydrocarbons: ethane C2H6 and propane C3H8. We have performed experiments to identify the temperature and partial densities ranges over which small hydrocarbon clusters form in saturated uniform supersonic flows. Using our unique reactor based on a Laval nozzle expansions, the kinetics of the formation has also been investigated down to 23 K. The chemical species present in the reactor are probed by a time of flight mass spectrometer equipped with an electron gun for soft ionization of the neutral reagents and products. This work aims at putting some constraints on the role of small hydrocarbon condensation in the formation of haze particles in the dense atmosphere of Titan.

  15. Process for separating C/sub 2+/ hydrocarbons from natural gas. Verfahren zur Abtrennung von C/sub 2+/-Kohlenwasserstoffen aus Erdgas

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, H.; Sapper, R.

    1987-03-05

    A process for separating C/sub 2+/ hydrocarbons from natural gas is claimed in which the natural gas is cooled, partially condensed, and separated into a liquid and a gaseous fraction. The liquid fraction is subcooled, expanded in the top region of a rectification column, and mixed with the expanded gaseous fraction. The rectification process produces a product flow containing C/sub 2+/ hydrocarbons, and a residual gas containing mostly lower-boiling constituents. The residual gas is heated up by indirect heat exchange with condensate and then by heat exchange with the gaseous fraction after partial condensation and with the natural gas led into the partial condensation process. The heated residual gas is expanded, producing work, and heated again by heat exchange with the natural gas to be cooled.

  16. Separation and analysis of aromatic hydrocarbons from two Chinese coals

    Institute of Scientific and Technical Information of China (English)

    DING Ming-jie; LI Wen-dian; XIE Rui-lun; ZONG Ying; CAI Ke-ying; PENG Yao-li; ZONG Zhi-min; XIE Rui-lun; WEI Xian-yong

    2008-01-01

    Separation and analysis of aromatic hydrocarbons (AHs) from coals is of considerable significance for both fuel and non-fuel use of the coals. In present work two Chinese bituminous coals were selected for separation of AHs by ultrasonic extraction with CS2 followed by column chromatography using hexane as eluent. A series of AHs were separated from the two coals and analyzed by GC/MS. FTIR was employed to characterize the raw coals and the extracted residues. The results of GC/MS analysis show that the separated AHs are mono- to tetracyclic arenes, among which the principle AHs are alkyl naphthalenes and phenanthrenes. Obvious differences in the composition and the structure of AHs exist between the two coals, i.e., the AHs from Tongting coal tend to be higher rings compared to those from Pingshuo coal both from the variety and from the abundance of the AHs. FFIR analysis shows that the raw and extracted coals are similar in terms of functional groups, suggesting that the composition and structure of CS extract, especially the AHs, from coals can be used to interpret the coal structure to some extent.

  17. Tröger’s Base Ladder Polymer for Membrane-Based Hydrocarbon Separation

    KAUST Repository

    Alhazmi, Abdulrahman

    2017-05-01

    The use of polymeric membranes for natural gas separation has rapidly increased during the past three decades, particularly for carbon dioxide separation from natural gas. Another valuable application is the separation of heavy hydrocarbons from methane (fuel gas conditioning), more importantly for remote area and off-shore applications. A new potential polymeric membrane that might be utilized for natural gas separations is a Tröger’s base ladder polymer (PIM-Trip-TB-2). This glassy polymeric membrane was synthesized by the polymerization reaction of 9, 10-dimethyl-2,6 (7) diaminotriptycene with dimethoxymethane. In this research, the polymer was selected due to its high surface area and highly interconnected microporous structure. Sorption isotherms of nitrogen (N2), oxygen (O¬2), methane (CH4), carbon dioxide (CO2), ethane (C2H6), propane (C3H8), and n-butane (n-C4H10) were measured at 35 °C over a range of pressures using a Hiden Intelligent Gravimetric Analyzer, IGA. The more condensable gases (C2H6, CO2, C3H8, and n-C4H10) showed high solubility due to their high affinity to the polymer matrix. The permeation coefficients were determined for various gases at 35 °C and pressure difference of 5 bar via the constant-pressure/variable-volume method. The PIM-Trip-TB-2 film exhibited high performance for several high-impact applications, such as O2/N2, H2/N2 and H2/CH4. Also, physical aging for several gases was examined by measuring the permeability coefficients at different periods of time. Moreover, a series of mixed-gas permeation tests was performed using 2 vol.% n-C4H10/98 vol.% CH4 and the results showed similar transport characteristics to other microporous polymers with pores of less than 2 nm. The work performed in this research suggested that PIM-Trip-TB-2 is suitable for the separation of: (i) higher hydrocarbons from methane and (ii) small, non-condensable gases such as O2/N2 and H2/CH4.

  18. Development of Advanced Membranes Technology Platform for Hydrocarbon Separations

    Energy Technology Data Exchange (ETDEWEB)

    Kalthod, Dr Dilip [Air Products and Chemicals, Inc., St. Louis, MO (United States)

    2010-03-01

    Virtually all natural gas is dehydrated during its production, transmission and storage, mostly by absorption processes. Membranes offer many potential advantages over absorption, including smaller footprints, lighter-weight packages, packaging flexibility, minimal electrical power duty, amenability to expansion due to system modularity, reduced maintenance costs, reduced emissions of heavy hydrocarbons, no liquid waste streams, and amenability to unmanned operation. The latter is particularly valuable because new natural gas sources are generally located in remote onshore and offshore sites. Most commercially-available membranes for natural gas upgrading involve high capital costs, high methane loss and performance degradation from operational upsets – all of which are barriers to their widespread adoption by the industry. The original focus of the project was to develop and demonstrate robust, high-performance membranes for natural gas dehydration. The first task completed was a user needs-and-wants study to 1) clarify the expectations of system fabricators and end users of the new separations equipment, and 2) establish the required technical and commercial targets for the membrane products. Following this, membrane system modeling and membrane development in the lab proceeded in parallel. Membrane module diameter and length, as well as and the fiber outer and inner fiber diameter, were optimized from a mathematical model that accounts for the relevant fluid dynamics and permeation phenomena. Module design was evaluated in the context of overall system design, capital costs and energy consumption, including the process scheme (particularly sweep generation), feed pretreatment, system layout, and process control. This study provided targets for membrane permeation coefficients and membrane geometry in a commercial offering that would be competitive with absorption systems. A commercially-available polymer with good tensile strength and chemical resistance was

  19. Process to separate alkali metal salts from alkali metal reacted hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, John Howard; Alvare, Javier; Larsen, Dennis; Killpack, Jeff

    2017-06-27

    A process to facilitate gravimetric separation of alkali metal salts, such as alkali metal sulfides and polysulfides, from alkali metal reacted hydrocarbons. The disclosed process is part of a method of upgrading a hydrocarbon feedstock by removing heteroatoms and/or one or more heavy metals from the hydrocarbon feedstock composition. This method reacts the oil feedstock with an alkali metal and an upgradant hydrocarbon. The alkali metal reacts with a portion of the heteroatoms and/or one or more heavy metals to form an inorganic phase containing alkali metal salts and reduced heavy metals, and an upgraded hydrocarbon feedstock. The inorganic phase may be gravimetrically separated from the upgraded hydrocarbon feedstock after mixing at a temperature between about 350.degree. C. to 400.degree. C. for a time period between about 15 minutes and 2 hours.

  20. Oil condensation boilers and problems with sulphur. Sulphur separation for oil-fired condensation boilers and flue gas scrubbers - six measurements at different boilers

    Energy Technology Data Exchange (ETDEWEB)

    Koebel, M.; Elsener, M.

    1988-11-01

    Three condensation boilers, one condensating scrubber boiler and two waste gas scrubbers were the objects of measurements made to determine to what degree sulphur is separated. The three condensation boilers which are only equipped with a condenser for the condensation of the combustion water shaved separation levels of between 0.5 and 3.5%. They are therefore not suitable for cutting the SO/sub 2/-emissions from the combustion of sulphur-containing fuel oil. The washer boilers showed better results (40-45%) despite the fact that it works with acid washing liquid (2.85 pH). To explain the high level of separation one must assume that under oxygen influence a large part of the sulphur dioxide is further oxidised to sulphuric acid. Alkaline washers showed very good separations of up to 90%. Here again a large part of the sulphur dioxide further oxidises to sulfates.

  1. Apparatus and method for rapid separation and detection of hydrocarbon fractions in a fluid stream

    Science.gov (United States)

    Sluder, Charles S.; Storey, John M.; Lewis, Sr., Samuel A.

    2013-01-22

    An apparatus and method for rapid fractionation of hydrocarbon phases in a sample fluid stream are disclosed. Examples of the disclosed apparatus and method include an assembly of elements in fluid communication with one another including one or more valves and at least one sorbent chamber for removing certain classifications of hydrocarbons and detecting the remaining fractions using a detector. The respective ratios of hydrocarbons are determined by comparison with a non separated fluid stream.

  2. Microporous metal-organic frameworks for storage and separation of small hydrocarbons

    NARCIS (Netherlands)

    He, Y.; Zhou, W.; Krishna, R.; Chen, B.

    2012-01-01

    Hydrocarbons are very important energy resources and raw materials for some industrially important products and fine chemicals. There is a need for the discovery of better materials that offer enhanced capacities for safe storage of hydrocarbons. Furthermore, the development of improved separation

  3. Microporous metal-organic frameworks for storage and separation of small hydrocarbons

    NARCIS (Netherlands)

    Y. He; W. Zhou; R. Krishna; B. Chen

    2012-01-01

    Hydrocarbons are very important energy resources and raw materials for some industrially important products and fine chemicals. There is a need for the discovery of better materials that offer enhanced capacities for safe storage of hydrocarbons. Furthermore, the development of improved separation t

  4. Separation of C2 Hydrocarbons by Porous Materials: Metal Organic Frameworks as Platform

    Energy Technology Data Exchange (ETDEWEB)

    Banerjee, Debasis; Liu, Jun; Thallapally, Praveen K.

    2014-12-22

    The effective separation of small hydrocarbon molecules (C1 – C4) is an important process for petroleum industry, determining the end price of many essential commodities in our daily lives. Current technologies for separation of these molecules rely on energy intensive fractional distillation processes at cryogenic temperature, which is particularly difficult because of their similar volatility. In retrospect, adsorptive separation using solid state adsorbents might be a cost effective alternative. Several types of solid state adsorbents (e.g. zeolite molecular sieves) were tested for separation of small hydrocarbon molecules as a function of pressure, temperature or vacuum. Among different types of plausible adsorbents, metal organic frameworks (MOFs), a class of porous, crystalline, inorganic-organic hybrid materials, is particularly promising. In this brief comment article, we discuss the separation properties of different types of solid state adsorbents, with a particular emphasis on MOF based adsorbents for separation of C2 hydrocarbon molecules.

  5. Diamondoid Hydrocarbons as Maturity Indicators for Condensates from Southern Indus Basin, Pakistan

    Directory of Open Access Journals (Sweden)

    Shagufta Nasir

    2013-01-01

    Full Text Available Diamondoid hydrocarbons have been examined in condensates reservoired in the Southern Indus Basin using GC-MS. Bulk properties reveal that samples are waxy and low sulfur with the exception of Pakhro and Gopang which are nonwaxy. TIC show bimodal distribution of n-alkanes along with high abundance of C20+ n-alkanes indicating substantial contribution of terrigeneous OM in these samples. CPI close to one is consistent with mature nature of oils. The samples show two ranges of Pr/Ph ratios. Those within the range of 2.2–2.7 reflect marine depositional settings for OM while others with Pr/Ph >3 may have originated from terrestrial OM deposited under marine oxic conditions. The cross plot of Pr/n-C17 versus Ph/n-C18 indicate type III kerogen as main source of OM deposited under marine to marine oxic conditions. The values of diamondoid based maturity parameters, like methyladamantane index 54.1–75.8% and methyldiamantane index 34.9–56.3% indicate high level of thermal maturity corresponding to vitrinite reflectance 1.1–1.6%. No biodegradation is observed in any of these samples as shown by methyladamantanes/adamantane 3.99–5.52 and methyldiamantanes/diamantane 2.16–2.99 and supported by high values of API gravity (45.13°–60.02° and absence of UCM.

  6. Zeolitic imidazolate framework membranes and methods of making and using same for separation of c2- and c3+ hydrocarbons and separation of propylene and propane mixtures

    KAUST Repository

    Lai, Zhiping

    2012-12-06

    Certain embodiments are directed to processes for fabrication of zeolitic imidazolate framework (ZIF) membranes. These ZIF membranes can be used in separating C2-hydrocarbons from C3+ hydrocarbons and propylene/propane mixtures.

  7. Analysis of an evaporator-condenser-separated mechanical vapor compression system

    Science.gov (United States)

    Wu, Hong; Li, Yulong; Chen, Jiang

    2013-04-01

    An evaporator-condenser-separated mechanical vapor compression (MVC) system was presented. The better effect of descaling and antiscaling was obtained by the new system. This study focused on the method of thermodynamic analysis, and the energy and exergy flow diagrams were established by using the first and second law of thermodynamics analysis. The results show that the energy utilization rate is very high and the specific power consumption is low. Exergy analysis indicates that the exergy efficiency is low, and the largest exergy loss occurs within the evaporator -condenser and the compressor.

  8. Numerical study and control method of interaction of nucleation and boundary layer separation in condensing flow

    Institute of Scientific and Technical Information of China (English)

    Liansuo AN; Zhi WANG; Zhonghe HAN

    2009-01-01

    The spontaneous nucleation flow in turbine cascade was numerically studied. The model was imple-mented within a full Navier-Stokes viscous flow solution procedure and the process of condensation was calculated by the quadrature method of moments that shows good accuracy with very broad size distributions.Results were presented for viscous and inviscous flow,showing the influence of boundary layer separation and wake vortices on spontaneous nucleation. The results show that the degree of flow separation in wet steam flow is greater than that in superheated steam flow due to condensation shock and that the loss cannot be neglected.Furthermore, the impact of boundary layer separation and wake vortices on velocity profiles and its implications for profile loss were considered. The calculations showed that layer separation and wake vortices influence nucleation rate, leading to different droplet distributions. A method for controlling homogeneous nucleation and for reducing degree of flow separation in high-speed transonic wet steam flow was presented. The liquid phase parameter distribution is sensitive to the suction side profile of turbine cascade, which impacts the nucleation rate distribution leading to different droplet distributions and affects the degree of flow separation. The numerical study provides a practical design method for turbine blade to reduce wetness losses.

  9. Oxidative Condensation of Methane — a New Pathway to the Synthesis of Ethane, Ethylene, and Other Hydrocarbons

    Science.gov (United States)

    Minachev, Khabib M.; Usachev, Nikolay Ya; Udut, V. N.; Khodakov, Yu S.

    1988-03-01

    During the last five years, the chemistry of methane has been enriched by the possibility of obtaining C2 and other hydrocarbons as a result of the oxidative condensation of methane in the presence of a series of catalytic systems. The availability of the starting materials (CH4 and O2) leads to extensive prospects for the replacement of the petroleum raw materials by natural gas in single-stage syntheses of valuable compounds and in the first place ethylene. This review gives a systematic account of the results of the selection of effective catalysts and surveys the information leading to the elucidation of the mechanism for the formation of the products of the extensive oxidation and oxidative condensation of methane. The bibliography includes 118 references.

  10. Phase Separation and Dynamics of two-component Bose-Einstein condensates

    CERN Document Server

    Lee, Kean Loon; Liu, I-Kang; Wacker, Lars; Arlt, Jan J; Proukakis, Nick P

    2016-01-01

    The miscibility of two interacting quantum systems is an important testing ground for the understanding of complex quantum systems. Two-component Bose-Einstein condensates enable the investigation of this scenario in a particularly well controlled setting. In a homogeneous system, the transition between mixed and separated phases is fully characterised by a `miscibility parameter', based on the ratio of intra- to inter-species interaction strengths. Here we show, however, that this parameter is no longer the optimal one for trapped gases, for which the location of the phase boundary depends critically on atom numbers. We demonstrate how monitoring of damping rates and frequencies of dipole oscillations enables the experimental mapping of the phase diagram by numerical implementation of a fully self-consistent finite-temperature kinetic theory for binary condensates. The change in damping rate is explained in terms of surface oscillation in the immiscible regime, and counterflow instability in the miscible reg...

  11. Feasibility of the preparation of silica monoliths for gas chromatography: fast separation of light hydrocarbons.

    Science.gov (United States)

    Azzouz, Imadeddine; Essoussi, Anouar; Fleury, Joachim; Haudebourg, Raphael; Thiebaut, Didier; Vial, Jerome

    2015-02-27

    The preparation conditions of silica monoliths for gas chromatography were investigated. Silica-based monolithic capillary columns based on sol-gel process were tested in the course of high-speed gas chromatographic separations of light hydrocarbons mixture (C1-C4). The impact of modifying the amount of porogen and/or catalyst on the monolith properties were studied. At the best precursor/catalyst/porogen ratio evaluated, a column efficiency of about 6500 theoretical plates per meter was reached with a very good resolution (4.3) for very light compounds (C1-C2). The test mixture was baseline separated on a 70cm column. To our knowledge for the first time a silica-based monolithic capillary column was able to separate light hydrocarbons from methane to n-butane at room temperature with a back pressure in the range of gas chromatography facilities (under 4.1bar).

  12. Mode-Locked CO Laser for Isotope Separation of Uranium Employing Condensation Repression

    Directory of Open Access Journals (Sweden)

    Igor Y. Baranov

    2010-01-01

    Full Text Available In the present work, we have suggested a technical solution of a CO laser facility for industrial separation of uranium used in the production of fuel for nuclear power plants. There has been used a method of laser isotope separation of uranium, employing condensation repression in a free jet. The laser operation with nanosecond pulse irradiation can provide acceptable efficiency in the separating unit and the high effective coefficient of the laser with the wavelength of 5.3 μm. Receiving a uniform RF discharge under medium pressure and high Mach numbers in the gas stream solves the problem of an electron beam and cryogenic cooler of CO lasers. The laser active medium is being cooled while it is expanding in the nozzle; a low-current RF discharge is similar to a non-self-sustained discharge. In the present work, we have developed a calculation model of optimization and have defined the parameters of a mode-locked CO laser with an RF discharge in the supersonic stream. The CO laser average power of 3 kW is sufficient for efficient industrial isotope separation of uranium at one facility.

  13. Azide-based cross-linking of polymers of intrinsic microporosity (PIMs) for condensable gas separation

    KAUST Repository

    Du, Naiying

    2011-03-11

    Cross-linked polymers of intrinsic microporosity (PIM)s for gas separation membranes, were prepared by a nitrene reaction from a representative PIM in the presence of two different diazide cross-linkers. The reaction temperature was optimized using TGA. The homogenous membranes were cast from THF solutions of different ratios of PIM to azides. The resulting cross-linked structures of the PIMs membranes were formed at 175 °C after 7.5 h and confirmed by TGA, XPS, FT-IR spectroscopy and gel content analysis. These resulting cross-linked polymeric membranes showed excellent gas separation performance and can be used for O 2/N 2 and CO 2/N 2 gas pairs, as well as for condensable gases, such as CO 2/CH 4, propylene/propane separation. Most importantly, and differently from typical gas separation membranes derived from glassy polymers, the crosslinked PIMs showed no obvious CO 2 plasticization up to 20 atm pressure of pure CO 2 and CO 2/CH 4 mixtures. © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Exploring the Framework Hydrophobicity and Flexibility of ZIF-8: From Biofuel Recovery to Hydrocarbon Separations

    KAUST Repository

    Zhang, Ke

    2013-11-07

    The framework hydrophobicity and flexibility of ZIF-8 are investigated by a detailed adsorption and diffusion study of a series of probe molecules including ethanol, 1-butanol, water, hexane isomers, xylene isomers, and 1,2,4-trimethylbenzene. The prospects for using ZIF-8 in biofuel recovery and hydrocarbon separations are discussed in terms of adsorption or kinetic selectivities. ZIF-8 shows extremely low water vapor uptakes and is especially suitable for vapor phase butanol-based biofuel recovery. The extraordinary framework flexibility of ZIF-8 is demonstrated by the adsorption of hydrocarbon molecules that are much larger than its nominal pore size, such as m-xylene, o-xylene and 1,2,4-trimethylbenzene. The calculation of corrected diffusion coefficients reveals an interesting spectrum of promising kinetic hydrocarbon separations by ZIF-8. These findings confirm that a molecular sieving effect tends to occur in the sorbate molecular size range of 4-6 Å rather than around the nominal ZIF-8 pore size of 3.4 Å, due to its surprising framework flexibility. © 2013 American Chemical Society.

  15. Hydrogen Selective Inorganic membranes for Gas Separations under High Pressure Intermediate Temperature Hydrocarbonic Envrionment

    Energy Technology Data Exchange (ETDEWEB)

    Rich Ciora; Paul KT Liu

    2012-06-27

    In this project, we have successfully developed a full scale commercially ready carbon molecular sieve (CMS) based membrane for applications in H{sub 2} recovery from refinery waste and other aggressive gas streams. Field tests at a refinery pilot plant and a coal gasification facility have successfully demonstrated its ability to recovery hydrogen from hydrotreating and raw syngas respectively. High purity H{sub 2} and excellent stability of the membrane permeance and selectivity were obtained in testing conducted over >500 hours at each site. The results from these field tests as well as laboratory testing conclude that the membranes can be operated at high pressures (up to 1,000 psig) and temperatures (up to 300 C) in presence of aggressive contaminants, such as sulfur and nitrogen containing species (H{sub 2}S, CO{sub 2}, NH{sub 3}, etc), condensable hydrocarbons, tar-like species, heavy metals, etc. with no observable effect on membrane performance. By comparison, similar operating conditions and/or environments would rapidly destroy competing membranes, such as polymeric, palladium, zeolitic, etc. Significant cost savings can be achieved through recovering H{sub 2} from refinery waste gas using this newly developed CMS membrane. Annual savings of $2 to 4MM/year (per 20,000 scfd of waste gas) can be realized by recovering the H{sub 2} for reuse (versus fuel). Projecting these values over the entire US market, potential H{sub 2} savings from refinery waste gases on the order of 750 to 1,000MM scfd and $750 to $1,000MM per year are possible. In addition to the cost savings, potential energy savings are projected to be ca. 150 to 220 tBTU/yr and CO{sub 2} gas emission reductions are projected to be ca. 5,000 to 6,500MMtons/year. The full scale membrane bundle developed as part of this project, i.e., 85 x 30 inch ceramic membrane tubes packaged into a full ceramic potting, is an important accomplishment. No comparable commercial scale product exists in the

  16. Applications of Condensate Refrigeration Technology in Small Light Hydrocar-bon Recovery Unit%小型轻烃回收装置自凝液制冷工艺及应用

    Institute of Scientific and Technical Information of China (English)

    陈自振; 赵滢; 赵燕; 刘宗耀

    2016-01-01

    小型轻烃回收装置自凝液制冷工艺设计的指导思想是不设置外冷源,利用自产凝液把制冷系统复叠在小型轻烃回收工艺加工过程中,合二为一。利用小型轻烃回收装置低温分离器自产的凝液将其节流降压,在蒸发器中吸收热介质的热量,自身汽化,汽化后的气体进原料气压缩机与原料气一起增压、冷却冷凝、分离。与外冷源制冷工艺相比,自凝液制冷工艺具有简化工艺、降低能耗、减少投资的优势。自凝液制冷小型轻烃回收工艺适用于富原料气,且原料气体C3+含量不能低于25%。组分中C3+含量越高,制冷效果越明显。%Process design guiding principle of condensate refrigeration of small light hydro-carbon recovery unit is that:not setting the external cooling source, but using self-conden-sate cooling, refrigeration system is set and combined in small light hydrocarbon recovery processes, where two in one. The condensate generated from the cryogenic separation of light hydrocarbon recovery unit will be utilized, throttled and depressurized. Next, in the evaporator, it will exchange heat with the media and be evaporated. Lastly, the evaporated gas will enter the feed gas compressor together with the feed gas, they would be pressurized, cooled, condensed and separated. Being compared with the external cooling source pro-cess, this method has the advantages of simplifying the process, reducing the energy con-sumption, and the investment, etc. Condensate refrigeration technology of small light hy-drocarbon recovery unit is suitable for the rich raw material gas, and C3+ content of raw ma-terial gas can't be lower than 25%. The higher component of C3+ content, the more obvious cooling effect.

  17. The separation and distribution of simple and condensed leucoanthocyanins of the tea plant (Camellia sinensis L.).

    Science.gov (United States)

    Forrest, G I; Bendall, D S

    1969-08-01

    1. Leucoanthocyanin monomers of high mobilities in aqueous solvents on thinlayer chromatograms, assumed to be structurally simple, were characteristic of mature bulky tissues, whereas members of lower mobility were confined to young vegetative and floral tissues. 2. Flavylogens were separated by gel filtration on Sephadex columns into monomeric, oligomeric and polymeric fractions. 3. The polymeric fraction from young brown stems was heterogeneous, one-half having a molecular weight of about 3400, one-third a molecular weight between 3600 and 17000, and the remainder a molecular weight of over 17000. 4. Leaves had low flavylogen concentrations; only monomers were present. Stem tissues were rich in polymers, which increased with the age of the young stem and decreased inwards through the wood. The maximal flavylogen concentrations were in the phloem and cambium from mature stems, where all three fractions were richly present. The periderm tissue and, to a lesser extent, the seed coat were characterized by a very high polymer/monomer ratio, exhibiting a much higher degree of polymerization than the wood. Root tissues contained high concentrations of monomers. 5. In general, there was an inverse correlation between the extent of polymerization and the complexity of the monomers present. 6. The results are in favour of the thesis that the function of the flavanols is, after polymerization to condensed tannins, to impregnate dead structural tissues and thereby to protect them from infection and decay.

  18. Plant hydrocarbon recovery process

    Energy Technology Data Exchange (ETDEWEB)

    Dzadzic, P.M.; Price, M.C.; Shih, C.J.; Weil, T.A.

    1982-01-26

    A process for production and recovery of hydrocarbons from hydrocarbon-containing whole plants in a form suitable for use as chemical feedstocks or as hydrocarbon energy sources which process comprises: (A) pulverizing by grinding or chopping hydrocarbon-containing whole plants selected from the group consisting of euphorbiaceae, apocynaceae, asclepiadaceae, compositae, cactaceae and pinaceae families to a suitable particle size, (B) drying and preheating said particles in a reducing atmosphere under positive pressure (C) passing said particles through a thermal conversion zone containing a reducing atmosphere and with a residence time of 1 second to about 30 minutes at a temperature within the range of from about 200* C. To about 1000* C., (D) separately recovering the condensable vapors as liquids and the noncondensable gases in a condition suitable for use as chemical feedstocks or as hydrocarbon fuels.

  19. Analysis of Polycyclic Aromatic Hydrocarbons (PAHs in soils using ultrasonic agitation, heater/mini condenser tube and gaseous chromatography

    Directory of Open Access Journals (Sweden)

    Jurandir Pereira Pinto

    2006-02-01

    Full Text Available The increase in the number of gas stations in Brazil made it also possible the increase in the risk of underground waters contamination due to fuel spill. The polycyclic aromatic hydrocarbons (PAHs are petroleum-derived components and constitute a group of organic pollutants which are persistent in the environment and have highly carcinogenic capacity. In this work it was developed a PAHs analysis methodology in soils for quantifying these components, using the gaseous chromatography technique, through the optimization and validation of the chromatographic as well as the extraction, concentration and purification conditions of the PAHs. A good resolution for the sixteen PAHs was obtained, with retention times ranging from 6.1 to 43.7 minutes. The tube-heater/mini condenser system used for the solvent evaporation also showed satisfactory recovery for the naphthalene (83% as well as the extraction method by ultrasonic agitation with dichloromethane, obtaining recoveries that ranged from 74 to 104%. The analysis method proved to be appropriate for the quantification of the 16 PAHs in the evaluation of the environmental contamination in gas stations.

  20. Adsorption and Separation of Small Hydrocarbons on the Flexible, Vanadium-Containing MOF, COMOC-2.

    Science.gov (United States)

    Couck, Sarah; Van Assche, Tom R C; Liu, Ying-Ya; Baron, Gino V; Van Der Voort, Pascal; Denayer, Joeri F M

    2015-05-12

    COMOC-2, a flexible vanadium-containing metal-organic framework, was investigated for its adsorption and separation properties of light hydrocarbons. COMOC-2 is an extended version of the MIL-47 framework with 4,4'-biphenyldicarboxylic acid linkers instead of terephthalic acid. Adsorption isotherms of methane to propane, ethylene, and propylene were determined with a gravimetric uptake technique at temperatures between 281 and 303 K. A pronounced breathing effect was observed (in contrast to the more rigid MIL-47 framework) in which the adsorption capacity increases by more than a factor of 2 at a given breathing pressure. The breathing pressure decreases with increasing hydrocarbon molecular weight. The typical two-step isotherms are nearly identical for alkanes and alkenes, in accordance with the nonpolar nature of the material. Binary isotherms of ethane and propane were also measured with the gravimetric uptake technique at different temperatures and total pressures. The mixture isotherms and breathing transition pressures were predicted by relying on the osmotic framework adsorbed solution theory (OFAST). Finally, the separation potential of COMOC-2 for ethane/propane mixtures was looked into using breakthrough experiments for different compositions and different pressures.

  1. Dynamic Entangled Porous Framework for Hydrocarbon (C2-C3) Storage, CO2 Capture, and Separation.

    Science.gov (United States)

    Sikdar, Nivedita; Bonakala, Satyanarayana; Haldar, Ritesh; Balasubramanian, Sundaram; Maji, Tapas Kumar

    2016-04-18

    Storage and separation of small (C1-C3) hydrocarbons are of great significance as these are alternative energy resources and also can be used as raw materials for many industrially important materials. Selective capture of greenhouse gas, CO2 from CH4 is important to improve the quality of natural gas. Among the available porous materials, MOFs with permanent porosity are the most suitable to serve these purposes. Herein, a two-fold entangled dynamic framework {[Zn2 (bdc)2 (bpNDI)]⋅4DMF}n with pore surface carved with polar functional groups and aromatic π clouds is exploited for selective capture of CO2 , C2, and C3 hydrocarbons at ambient condition. The framework shows stepwise CO2 and C2 H2 uptake at 195 K but type I profiles are observed at 298 K. The IAST selectivity of CO2 over CH4 is the highest (598 at 298 K) among the MOFs without open metal sites reported till date. It also shows high selectivity for C2 H2 , C2 H4 , C2 H6 , and C3 H8 over CH4 at 298 K. DFT calculations reveal that aromatic π surface and the polar imide (RNC=O) functional groups are the primary adsorption sites for adsorption. Furthermore, breakthrough column experiments showed CO2 /CH4 C2 H6 /CH4 and CO2 /N2 separation capability at ambient condition.

  2. The binding nature of light hydrocarbons on Fe/MOF-74 for gas separation.

    Science.gov (United States)

    Kim, Heejin; Park, Joonho; Jung, Yousung

    2013-12-07

    The application of a metal-organic framework (MOF) has expanded into the area of heterogeneous catalysis, gas storage and separation, drug delivery, and lightweight magnets. Herein, we investigate the nature of olefin and paraffin binding on Fe/MOF-74 and identify several factors that determine separation efficiency using the first-principles calculations. The calculated binding energies and magnetic orderings are in excellent agreement with those observed in experiments. While the olefin strongly interacts with Fe atoms through a well-known π-complexation, the HOMO - 1(2) of the paraffin weakly interacts with Fe atoms without back-donation, facilitating the olefin-paraffin separation primarily. However, the mutual gas-gas interactions and magnetic transitions of the MOF host also contribute significantly to the total binding energy of each gas molecule as much as 2-28% and 6-8%, respectively, emphasizing the necessity that these subtle effects must be handled carefully when considering selective binding with small energy differences. In particular, Fe/MOF-74 is shown to be a unique system where the guest-dependent magnetic transition observed only for the olefin adsorption is a secondary reason for the high olefin-paraffin adsorption selectivity measured. The understanding of the hydrocarbon binding energetics can provide a way to modify MOFs for enhanced separation/sorption properties that can be complemented by principles of kinetic separation.

  3. Selectivity of oxazolidine derivatives in the separation of C/sub 5/ hydrocarbons with different degrees of saturation

    Energy Technology Data Exchange (ETDEWEB)

    Apter, Yu.M.; Gaile, A.A.; Proskuryakov, V.A.; Semenov, L.V.

    1980-01-01

    An increase in the selectivity of cyclic compound solvents in the separation of hydrocarbons of different degrees of saturation can be attained by reducing the size of the ring and introducing an additional heteroatom into the ring. In connection with this, the selectivity of oxazolidine derivatives, differing in respect to their structure from known extractants -- pyrrolidine derivatives -- by the presence of a second heteroatom in the ring and from morpholine derivatives by the smaller ring size was studied. It was found that oxazolidine derivatives show higher selectivity in respect to hydrocarbon systems than the corresponding pyrrolidine and morpholine derivatives. The dissolving capacity of oxazolidine derivatives in respect to unsaturated hydrocarbons is higher than that of isomeric compounds of the morpholine series. The values of the activity coefficients of the C/sub 5/ hydrocarbons at infinite dilution in polar solvents correlate satisfactorily with the ionization potentials of the hydrocarbons.

  4. Influence of mid-point temperature of heavy hydrocarbons separator to the liquefaction process for small LNG plant

    Science.gov (United States)

    Hakim, H. A.; Indarto, A.

    2016-11-01

    In liquefied natural gas (LNG) process production, one of the important units is heavy hydrocarbon removal unit to prevent freezing during liquefaction. For small scale of LNG plant, this unit is usually integrated with main heat exchanger. Feed is obtained from main heat exchanger then flows to separator to separate liquid from gas. The separator operating condition is called as Midpoint condition. Selecting Midpoint conditions have impact to light hydrocarbon losses, Specific Brake Horse Power (SBHP) process, and heating value of LNG. Hence understanding of selecting this condition and its effect to light hydrocarbon losses, SBHP process, and HHV of LNG will help to design more efficient LNG plant. According to study, the lower of Mid-Point temperature will result in lower SBHP, lower of light hydrocarbon losses, and increase LNG of HHV value. Meanwhile, the higher Mid-Point pressure will result in lower SBHP, higher light hydrocarbon losses, and lower LNG of HHV value. The change of Mid-Point pressures have more impact to light hydrocarbon losses than SBHP process.

  5. Comparison of monolithic capillary electrochromatography and micellar electrokinetic chromatography for the separation of polycyclic aromatic hydrocarbons.

    Science.gov (United States)

    Salwiński, Aleksander; Delépée, Raphaël

    2014-05-01

    Atmospheric pollution of anthropic origin is recognized as a major risk factor for health, in particular for respiratory and cardio-vascular systems. Among these pollutants, polycyclic aromatic hydrocarbons (PAHs) are placed on the list of US Environmental Protection Agency (EPA) as 'priority' pollutants and four of them are assigned as potential carcinogens by The International Agency for Research on Cancer (IARC). In the present work two capillary techniques-micellar electrokinetic chromatography (MEKC) and monolithic capillary electrochromatography (CEC)-were compared for the separation of eleven PAHs. Both techniques compared in the present work are fully compatible with every standard apparatus of capillary electrophoresis. For MEKC, enhancement of selectivity and decrease of the separation window of eleven PAHs were obtained with methanol:borate 25 mM (20/80, v/v) running buffer containing 10 mM of hydroxypropylated γ-cyclodextrins with low SDS content (25 mM). In case of CEC, two acrylate-based monolithic stationary phases (MSPs) were evaluated for their application in the separation of eleven PAHs. The best MSP based on butyl acrylate was compared with MEKC in terms of sample capacity, PAHs elution order, LOQ, efficiency and effect of pH. Influence of the hydrophobicity of mobile phase on the PAHs elution order was also studied.

  6. ENHANCED PERVAPORATION SEPARATION EFFICIENCY VIA STAGED FRACTIONAL CONDENSATION (DEPHLEGMATION) OF PERMEATE VAPOR

    Science.gov (United States)

    In traditional pervaporation systems, the permeate vapor is completely condensed to obtain a liquid permeate stream. For example, in the recovery of ethanol from a 5-wt% aqueous stream (such as a biomass fermentation broth), the permeate from a silicone rubber pervaporation membr...

  7. Phase separation and dynamics of two-component Bose-Einstein condensates

    DEFF Research Database (Denmark)

    Lee, Kean Loon; Jørgensen, Nils Byg; Liu, I-Kang;

    2016-01-01

    The miscibility of two interacting quantum systems is an important testing ground for the understanding of complex quantum systems. Two-component Bose-Einstein condensates enable the investigation of this scenario in a particularly well controlled setting. In a homogeneous system, the transition...

  8. Comparison of the behavior of metal-organic frameworks and zeolites for hydrocarbon separations.

    Science.gov (United States)

    Peralta, David; Chaplais, Gérald; Simon-Masseron, Angélique; Barthelet, Karin; Chizallet, Céline; Quoineaud, Anne-Agathe; Pirngruber, Gerhard D

    2012-05-16

    The objective of this work was to study the adsorption and separation of the most important families of hydrocarbon compounds on metal-organic frameworks (MOFs), in comparison with zeolites. For this purpose, we have selected four probe molecules, each of them representing one of these families, i.e., o- and p-xylene as aromatics, 1-octene as an alkene, and n-octane as an alkane. The separation of these four molecules was studied by binary breakthrough experiments. To represent the large diversity of MOF structures, the experiments were carried out with (i) two MOFs with coordinatively unsaturated metal sites (CUS), i.e., Cu-btc (HKUST-1) and CPO-27-Ni, (ii) a MOF with an anionic framework and extraframework cations, i.e. RHO-ZMOF, and (iii) two rather apolar zeolitic imidazolate framework (ZIF) materials with different pore sizes, i.e. ZIF-8 and ZIF-76. Zeolite NaY and zeolite β were used as polar and apolar reference adsorbents, respectively. The results can be briefly summarized as follows: ZIFs (not carrying any polar functional groups) behave like apolar adsorbents and exhibit very interesting and unexpected molecular sieving properties. CUS-MOFs behave like polar adsorbents but show the specificity of preferring alkenes over aromatics. This feature is rationalized thanks to DFT+D calculations. MOFs with extraframework cations behave like polar (cationic) zeolites.

  9. New caffeine bonded phase for separation of polyaromatic hydrocarbons and petroleum asphaltenes by high-performance liquid chromatography

    Energy Technology Data Exchange (ETDEWEB)

    Felix, G.; Bertrand, C.; Gastel, F. van

    1985-03-01

    The preparation of a new caffeine phase for HPLC is described. The capacity ratios (k') of about ten polyaromatic hydrocarbons have been determined. It has been shown that the aromatics were eluted according the number of rings, only slightly influenced by the substituents. The performance of the stationary phase is demonstrated with separations of petroleum asphalts and residues and aromatic mixtures.

  10. Protection by uridine diphosphoglucuronic acid and DT-diaphorase against the cytotoxicity of polycyclic aromatic hydrocarbons isolated from a complex coal gasification condensate.

    Science.gov (United States)

    Swanson, M S; Haugen, D A; Reilly, C A; Stamoudis, V C

    1986-06-30

    The cytotoxicities of polycyclic aromatic hydrocarbon (PAH) subclasses isolated from a complex organic mixture (coal gasification condensate) were studied in vitro in Chinese hamster ovary cells, in the presence of rat liver microsomes from animals pretreated with Aroclor. Toxicity was enhanced by microsomal metabolism and was inversely related to aromatic ring number. Rat liver cytosol, semipurified DT-diaphorase, and uridine diphosphoglucuronic acid decreased the cytotoxicity of a variety of PAH mixtures and representative PAH, as well as individual PAH metabolites. The results indicate that the in vitro toxicity of complex PAH mixtures is caused primarily by hydroxy-PAH and quinone metabolites of the predominant, nonmutagenic two- and three-ring PAHs.

  11. Highly scalable ZIF-based mixed-matrix hollow fiber membranes for advanced hydrocarbon separations

    KAUST Repository

    Zhang, Chen

    2014-05-29

    ZIF-8/6FDA-DAM, a proven mixed-matrix material that demonstrated remarkably enhanced C3H6/C3H8 selectivity in dense film geometry, was extended to scalable hollow fiber geometry in the current work. We successfully formed dual-layer ZIF-8/6FDA-DAM mixed-matrix hollow fiber membranes with ZIF-8 nanoparticle loading up to 30 wt % using the conventional dry-jet/wet-quench fiber spinning technique. The mixed-matrix hollow fibers showed significantly enhanced C3H6/C3H8 selectivity that was consistent with mixed-matrix dense films. Critical variables controlling successful formation of mixed-matrix hollow fiber membranes with desirable morphology and attractive transport properties were discussed. Furthermore, the effects of coating materials on selectivity recovery of partially defective fibers were investigated. To our best knowledge, this is the first article reporting successful formation of high-loading mixed-matrix hollow fiber membranes with significantly enhanced selectivity for separation of condensable olefin/paraffin mixtures. Therefore, it represents a major step in the research area of advanced mixed-matrix membranes. © 2014 American Institute of Chemical Engineers.

  12. A new MOF-5 homologue for selective separation of methane from C2 hydrocarbons at room temperature

    Directory of Open Access Journals (Sweden)

    Yabing He

    2014-12-01

    Full Text Available A new MOF-5 homologue compound UTSA-10 has been obtained under solvothermal conditions from a mixture of Zn(NO32⋅6H2O and commercially available linker, 2-methylfumaric acid, in N,N-dimethylformamide. The moderate surface area and suitable pore sizes enable the activated UTSA-10a to separate methane from C2 hydrocarbons at room temperature.

  13. Effect of the Structure of Cations and Anions of Ionic Liquids on Separation of Aromatics from Hydrocarbon Mixtures

    Institute of Scientific and Technical Information of China (English)

    Liu Yansheng; Zhang Zhongxin; Zhang Guofu; Liu Zhichang; Hu Yufeng; Shi Quan; Ji Dejun

    2006-01-01

    The effects of the structure of typical cations and anions of ionic liquids on the separation of benzene and toluene from aromatic/paraffin mixtures were studied. The results showed that the corresponding separation factors were considerably larger than those of the traditional solvents (Benzene+Hexane+sulfolane), and that the ionic liquids could be used as novel solvents for the separation of aromatics from hydrocarbon mixtures. The key parameters governing the ability of ionic liquids for separating aromatics from hydrocarbon sources were investigated. It was found that the effectiveness of the ionic liquids, based on the same anion, changed in the cation order of [BIqu]+< [BPy]+< [BMIM]+. The selectivity of the ionic liquid toward aromatics decreased apparently with the increasing length of the substituted alkyl chain of its cationic head ring. The separation factors, based on the same cation, changed in the anion order of [Tf2N]-<[PF6]-<[BF4]-<[C2H5SO4]-. The solubilities of the aromatics were greater in the ionic liquids based on the former three anions than that in the ionic liquids involving [C2H5SO4]-.

  14. Identification and quantification of six-ring C₂₆H₁₆ cata-condensed polycyclic aromatic hydrocarbons in a complex mixture of polycyclic aromatic hydrocarbons from coal tar.

    Science.gov (United States)

    Oña-Ruales, Jorge O; Sharma, Arun K; Wise, Stephen A

    2015-12-01

    We applied a combination of normal-phase liquid chromatography (NPLC) with ultraviolet-visible spectroscopy and gas chromatography with mass spectrometry (GC/MS) for the fractionation, identification, and quantification of six ring C26H16 cata-condensed polycyclic aromatic hydrocarbons, PAHs, in the Standard Reference Material 1597a, Complex Mixture of PAHs from Coal Tar. For the characterization analysis, we calculated the GC retention indices of 17 C26H16 PAH authentic reference standards using the Rxi-PAH and DB-5 GC columns. Then, we used NPLC with ultraviolet-visible spectroscopy to isolate the fractions containing the C26H16 PAHs, and subsequently, we used GC/MS to establish the identity and quantity of the C26H16 PAHs using authentic reference standards. Following this procedure, 12 C26H16 cata-condensed PAHs benzo[c]pentaphene, dibenzo[f,k]tetraphene, benzo[h]pentaphene, dibenzo[a,l]tetracene, dibenzo[c,k]tetraphene, naphtho[2,3-c]tetraphene, dibenzo[a,c]tetracene, benzo[b]picene, dibenzo[a,j]tetracene, naphtho[2,1-a]tetracene, dibenzo[c,p]chrysene, and dibenzo[a,f]tetraphene were identified and quantified for the first time, and benzo[c]picene was quantified for the first time in an environmental combustion sample.

  15. Synthesis of silver nanoparticles confined in hierarchically porous monolithic silica: a new function in aromatic hydrocarbon separations.

    Science.gov (United States)

    Zhu, Yang; Morisato, Kei; Li, Wenyan; Kanamori, Kazuyoshi; Nakanishi, Kazuki

    2013-03-01

    Silver nanoparticles (Ag NPs) have been homogeneously introduced into hierarchically porous monolithic silica columns with well-defined macropores and SBA-15-type hexagonally ordered mesopores by using ethanol as the mild reductant. Within the cylindrical silica mesopores treated with aminopropyl groups as the host, monocrystalline Ag NPs and nanorods are obtained after being treated in silver nitrate/ethanol solution at room temperature for different durations of reducing time. The loading of Ag NPs in the monolith can be increased to 33 wt % by the repetitive treatment, which also led to the formation of polycrystalline Ag nanorods in the mesopores. Although the bare silica column cannot separate aromatic hydrocarbons, good separation of those molecules by noncharged Ag NPs confined in the porous structure of the monolith has been for the first time demonstrated with the Ag NP-embedded silica column. The NP-embedded monolithic silica would be a powerful separation tool for hydrocarbons with different number, position, and configuration of unsaturated bonds.

  16. Thermodynamic study of characteristics of the converter with separated supply of hydrocarbon fuel for thermo-oxidative and steam reforming

    Science.gov (United States)

    Bassina, I. A.; Malkov, Yu. P.; Molchanov, O. N.; Stepanov, S. G.; Troshchinenko, G. A.; Zasypkin, I. M.

    2014-04-01

    Thermodynamic studies of the converter characteristics were performed to produce hydrogen-containing syngas from hydrocarbon fuel (kerosene) with its separated supply for thermo-oxidative and steam reforming. It is demonstrated that the optimal conditions of the converter performance correlate with the oxidant ratio of α > 0.5 at the heattransfer wall temperature of 1200 K. Hydrogen content in the final syngas reaches 60 % by volume, free carbon (soot) deposition in reforming products is excluded, and there is no need to apply walls water cooling in the converter.

  17. Phase separation in a binary mixture confined between symmetric parallel plates: Capillary condensation transition near the bulk critical point

    Science.gov (United States)

    Yabunaka, Shunsuke; Okamoto, Ryuichi; Onuki, Akira

    2013-03-01

    We investigate phase separation of near-critical binary mixtures between parallel symmetric walls in the strong adsorption regime. We take into account the renormalization effect due to the critical fluctuations using the recent local functional theory [Okamoto and Onuki, J. Chem. Phys.0021-960610.1063/1.3693331 136, 114704 (2012)]. In statics, a van der Waals loop is obtained in the relation between the average order parameter in the film and the chemical potential when the temperature T is lower than the film critical temperature Tcca (in the case of an upper critical solution temperature). In dynamics, we lower T below the capillary condensation line from above Tcca. We calculate the subsequent time development assuming no mass exchange between the film and the reservoir. In the early stage, the order parameter ψ changes only in the direction perpendicular to the walls. For sufficiently deep quenching, such one-dimensional profiles become unstable with respect to the fluctuations varying in the lateral directions. The late-stage coarsening is then accelerated by the hydrodynamic interaction. A pancake domain of the phase disfavored by the walls finally appears in the middle of the film.

  18. Sharp separation of C2/C3 hydrocarbon mixtures by zeolitic imidazolate framework-8 (ZIF-8) membranes synthesized in aqueous solutions

    KAUST Repository

    Pan, Yichang

    2011-01-01

    Exceptional high quality ZIF-8 membranes prepared through a novel seeded growth method in aqueous solutions at near room temperature exhibit excellent separation performance for C2/C3 hydrocarbon mixtures. The separation factors for mixtures of ethane/propane, ethylene/propylene and ethylene/propane are ∼80, ∼10 and ∼167, respectively. © 2011 The Royal Society of Chemistry.

  19. Separation of submicron particles from biofuel combustion with flue gas condensation or wet condensing electrostatic precipitator. Analysis of possibilities; Avskiljning av submikrona partiklar vid biobraenslefoerbraenning med roekgaskondensering eller kondenserande vaata elfilter. Analys av moejligheterna

    Energy Technology Data Exchange (ETDEWEB)

    Roennbaeck, Marie; Gustavsson, Lennart [Swedish National Testing and Research Inst., Boraas (Sweden)

    2006-11-15

    Dust particles in flue gas larger than 1 {mu}m are well separated by conventional techniques, while submicron particles are poorly separated. As the use of biofuels with high ash content is increasing, as well as knowledge about negative health effects from inhalation of submicron particles, the interest for reduction of emissions of submicron particles will probably increase. The aim of this project is to investigate possible techniques for separation of submicron particles during flue gas condensation through modification of conventional technique, or with available techniques not usually used with combustion of biofuels, e.g. a wet electrostatic precipitator. Mechanisms for separation of dust particles are briefly described. Cyclones separates particles larger than about 1 {mu}m. Fabric filters separates all particles sizes, but the efficiency reduces as the size reduces. In flue gas condensers and scrubbers the speed and size of water droplets are important for the reduction efficiency. Dry electrostatic precipitators work for all particle sizes, but with reduced efficiency for sizes between 0.1 and 3 {mu}m. Wet electrostatic precipitators separates submicron particles much better. One reason for this is that the potential between the electrodes can be higher. Among conventional flue gas condensers and scrubbers there are two types that, properly designed, can separate submicron particles, namely 'type venturi scrubbers', i.e. a scrubber where a high flue gas velocity is used to form many, small water droplets by friction forces in a nozzle, and 'type scrubber with nozzles', i.e. a scrubber where nozzles supply droplets to the flue gas. For a scrubber with nozzles, the falling velocity of the droplets must be lower and the size smaller than is common today. Also the wet electrostatic precipitator separates submicron particles with high efficiency. They are used today mainly for problematic particles, e.g. sticky or corrosive ones, or for

  20. Identification and quantification of seven fused aromatic rings C26H14 peri-condensed benzenoid polycyclic aromatic hydrocarbons in a complex mixture of polycyclic aromatic hydrocarbons from coal tar.

    Science.gov (United States)

    Oña-Ruales, Jorge O; Ruiz-Morales, Yosadara; Wise, Stephen A

    2016-04-15

    A methodology for the characterization of groups of polycyclic aromatic hydrocarbons (PAHs) using a combination of normal phase liquid chromatography with ultraviolet-visible spectroscopy (NPLC/UV-vis) and gas chromatography with mass spectrometry (GC/MS) was used for the identification and quantification of seven fused aromatic rings C26H14 peri-condensed benzenoid polycyclic aromatic hydrocarbons, PAHs, in standard reference material (SRM) 1597a, complex mixture of PAHs from coal tar. The NPLC/UV-vis isolated the fractions based on the number of aromatic carbons and the GC/MS allowed the identification and quantification of five of the nine C26H14 PAH isomers; naphtho[1,2,3,4-ghi]perylene, dibenzo[b,ghi]perylene, dibenzo[b,pqr]perylene, naphtho[8,1,2-bcd]perylene, and dibenzo[cd,lm]perylene using a retention time comparison with authentic reference standards. For the other four benzenoid isomers with no available reference standards the following two approaches were used. First, the annellation theory was used to achieve the potential identification of benzo[qr]naphtho[3,2,1,8-defg]chrysene, and second, the elution distribution in the GC fractions was used to support the potential identification of benzo[qr]naphtho[3,2,1,8-defg]chrysene and to reach the tentative identifications of dibenzo[a,ghi]perylene, naphtho[7,8,1,2,3-pqrst]pentaphene, and anthra[2,1,9,8-opqra]naphthacene. It is the first time that naphtho[1,2,3,4-ghi]perylene, dibenzo[b,ghi]perylene, dibenzo[b,pqr]perylene, naphtho[8,1,2-bcd]perylene, and dibenzo[cd,lm]perylene are quantified, and the first time that benzo[qr]naphtho[3,2,1,8-defg]chrysene is potentially identified, in any sample, in any context.

  1. Optimizing separation conditions of 19 polycyclic aromatic hydrocarbons by cyclodextrin-modified capillary electrophoresis and applications to edible oils.

    Science.gov (United States)

    Ferey, Ludivine; Delaunay, Nathalie; Rutledge, Douglas N; Cordella, Christophe B Y; This, Hervé; Huertas, Alain; Raoul, Yann; Gareil, Pierre

    2014-02-01

    For the first time, the separation of 19 polycyclic aromatic hydrocarbons (PAHs) listed as priority pollutants in environmental and food samples by the United States Environmental Protection Agency (US-EPA) and the European Food Safety Authority was developed in cyclodextrin (CD)-modified capillary zone electrophoresis with laser-induced fluorescence detection (excitation wavelength: 325 nm). The use of a dual CD system, involving a mixture of one neutral CD and one anionic CD, enabled to reach unique selectivity. As solutes were separated based on their differential partitioning between the two CDs, the CD relative concentrations were investigated to optimize selectivity. Separation of 19 PAHs with enhanced resolutions as compared with previous studies on the 16 US-EPA PAHs and efficiencies superior to 1.5 × 10(5) were achieved in 15 min using 10mM sulfobutyl ether-β-CD and 20mM methyl-β-CD. The use of an internal standard (umbelliferone) with appropriate electrolyte and sample compositions, rinse sequences and sample vial material resulted in a significant improvement in method repeatability. Typical RSD variations for 6 successive experiments were between 0.8% and 1.7% for peak migration times and between 1.2% and 4.9% for normalized corrected peak areas. LOQs in the low µg/L range were obtained. For the first time in capillary electrophoresis, applications to real vegetable oil extracts were successfully carried out using the separation method developed here.

  2. Separation of C(5)-hydrocarbons on microporous materials: complementary performance of MOFs and zeolites.

    Science.gov (United States)

    Maes, Michael; Alaerts, Luc; Vermoortele, Frederik; Ameloot, Rob; Couck, Sarah; Finsy, Vincent; Denayer, Joeri F M; De Vos, Dirk E

    2010-02-24

    This work studies the liquid-phase separation of the aliphatic C(5)-diolefins, mono-olefins, and paraffins, a typical feed produced by a steam cracker, with a focus on the seldomly studied separation of the C(5)-diolefin isomers isoprene, trans-piperylene, and cis-piperylene. Three adsorbents are compared: the metal-organic framework MIL-96, which is an aluminum 1,3,5-benzenetricarboxylate, and two zeolites with CHA and LTA topology. All three materials have spacious cages that are accessible via narrow cage windows with a diameter of less than 0.5 nm. The mechanisms determining adsorption selectivities on the various materials are investigated. Within the diolefin fraction, MIL-96 and chabazite preferentially adsorb trans-piperylene from a mixture containing all three C(5)-diolefin isomers with high separation factors and a higher capacity compared to the reference zeolite 5A due to a more efficient packing of the trans isomer in the pores. Additionally, chabazite is able to separate cis-piperylene and isoprene based on size exclusion of the branched isomer. This makes chabazite suitable for separating all three diolefin isomers. Its use in separating linear from branched mono-olefins and paraffins is addressed as well. Furthermore, MIL-96 is the only material capable of separating all three diolefin isomers from C(5)-mono-olefins and paraffins. Finally, the MOF [Cu(3)(BTC)(2)] (BTC = benzene-1,3,5-tricarboxylate) is shown to be able to separate C(5)-olefins from paraffins. On the basis of these observations, a flow scheme can be devised in which the C(5)-fraction can be completely separated using a combination of MOFs and zeolites.

  3. Liquid-expanded-liquid-condensed phase transition in amphiphilic monolayers: A renormalization-group approach to chiral-symmetry breaking of hydrocarbon-chain defects

    Science.gov (United States)

    Legré, J.-P.; Albinet, G.; Firpo, J.-L.; Tremblay, A.-M. S.

    1984-11-01

    This paper is concerned with the liquid-expanded (LE) -liquid-condensed (LC) transition in monolayers of amphiphilic molecules at the air-water interface. A model, which can be mapped into the Blume-Emery-Griffiths Hamiltonian, has been considered before within the (mean-field) Bragg-Williams approximation and it gave results which could be successfully compared with experiment. The LE-LC transition has been associated with a chiral-symmetry breaking of the hydrocarbon-chain defects. This model is treated here with a Migdal-Kadanoff approximate position-space renormalization group. Renormalization-group flows are consistent with those obtained by previous authors. The connection between experimental and Hamiltonian parameters is easiest for a particular choice of ensemble, which turns out to be rather subtle for this problem. As in the work of Lavis, Southern, and Bell, isotherms in the surface-pressure-molecular-area plane do not show a signature of the LE-LC transition. The better agreement between experiments (showing a compressibility jump at the LE-LC transition) and mean-field theory suggests that in these cases long-range forces depending on the nature of the polar head and on the water substrate pH are responsible for the jump.

  4. Adsorptive Separation of Acetylene from Light Hydrocarbons by Mesoporous Iron Trimesate MIL-100(Fe).

    Science.gov (United States)

    Yoon, Ji Woong; Lee, Ji Sun; Lee, Sukyung; Cho, Kyoung Ho; Hwang, Young Kyu; Daturi, Marco; Jun, Chul-Ho; Krishna, Rajamani; Chang, Jong-San

    2015-12-07

    A reducible metal-organic framework (MOF), iron(III) trimesate, denoted as MIL-100(Fe), was investigated for the separation and purification of methane/ethane/ethylene/acetylene and an acetylene/CO2 mixtures by using sorption isotherms, breakthrough experiments, ideal adsorbed solution theory (IAST) calculations, and IR spectroscopic analysis. The MIL-100(Fe) showed high adsorption selectivity not only for acetylene and ethylene over methane and ethane, but also for acetylene over CO2 . The separation and purification of acetylene over ethylene was also possible for MIL-100(Fe) activated at 423 K. According to the data obtained from operando IR spectroscopy, the unsaturated Fe(III) sites and surface OH groups are mainly responsible for the successful separation of the acetylene/ethylene mixture, whereas the unsaturated Fe(II) sites have a detrimental effect on both separation and purification. The potential of MIL-100(Fe) for the separation of a mixture of C2 H2 /CO2 was also examined by using the IAST calculations and transient breakthrough simulations. Comparing the IAST selectivity calculations of C2 H2 /CO2 for four MOFs selected from the literature, the selectivity with MIL-100(Fe) was higher than those of CuBTC, ZJU-60a, and PCP-33, but lower than that of HOF-3. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Hydrocarbon/CO{sub 2}/water multiphase equilibrium separations. Final report, July 1, 1993--September 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Wu, C.H.; Eubank, P.T.; Barrufet, M.A. [Texas A and M Univ., College Station, TX (United States)

    1995-12-31

    Hydrocarbon (HC)/water and HC/CO{sub 2}/water systems are frequently found in petroleum recovery processes, petroleum refining, and gasification of coals, lignites and tar sands. Objective is to provide techniques for analyzing these mixtures at pressures up to 10,000 psia and temperatures up to 500 F; two laboratory apparatus were developed for this purpose. Three-phase separation data are obtained for mixtures of pure n-alkanes (C{sub 3} to C{sub 20}), CO{sub 2}, and water; and for mixtures of pseudocomponents of crude oils and water. Crude oils are characterized using a modified Whitson`s method. Rigorous equation-of-state computer simulators were developed and validated with experimental data; they are essential for reservoir engineering and enhanced oil recovery.

  6. The Separation and Identification of Straight Chain Hydrocarbons: An Experiment Using Gas-Liquid Chromatography.

    Science.gov (United States)

    Benson, G. A.

    1982-01-01

    An experiment using gas-liquid chromatography is discussed, introducing the student to concept of dead volume and its measurement, idea and use of an internal reference compound, and to linear relationship existing between measurements of a separation on two different stationary phases. (Author/SK)

  7. An experimental design based strategy to optimize a capillary electrophoresis method for the separation of 19 polycyclic aromatic hydrocarbons.

    Science.gov (United States)

    Ferey, Ludivine; Delaunay, Nathalie; Rutledge, Douglas N; Huertas, Alain; Raoul, Yann; Gareil, Pierre; Vial, Jérôme; Rivals, Isabelle

    2014-04-11

    Because of their high toxicity, international regulatory institutions recommend monitoring specific polycyclic aromatic hydrocarbons (PAHs) in environmental and food samples. A fast, selective and sensitive method is therefore required for their quantitation in such complex samples. This article deals with the optimization, based on an experimental design strategy, of a cyclodextrin (CD) modified capillary zone electrophoresis separation method for the simultaneous separation of 19 PAHs listed as priority pollutants. First, using a central composite design, the normalized peak-start and peak-end times were modelled as functions of the factors that most affect PAH electrophoretic behavior: the concentrations of the anionic sulfobutylether-β-CD and neutral methyl-β-CD, and the percentage of MeOH in the background electrolyte. Then, to circumvent computational difficulties resulting from the changes in migration order likely to occur while varying experimental conditions, an original approach based on the systematic evaluation of the time intervals between all the possible pairs of peaks was used. Finally, a desirability analysis based on the smallest time interval between two consecutive peaks and on the overall analysis time, allowed us to achieve, for the first time in CE, full resolution of all 19 PAHs in less than 18 min. Using this optimized capillary electrophoresis method, a vegetable oil was successfully analyzed, proving its suitability for real complex sample analysis.

  8. Lipidic ionic liquid stationary phases for the separation of aliphatic hydrocarbons by comprehensive two-dimensional gas chromatography.

    Science.gov (United States)

    Nan, He; Zhang, Cheng; O'Brien, Richard A; Benchea, Adela; Davis, James H; Anderson, Jared L

    2017-01-20

    Lipidic ionic liquids (ILs) possessing long alkyl chains as well as low melting points have the potential to provide unique selectivity as well as wide operating ranges when used as stationary phases in gas chromatography. In this study, a total of eleven lipidic ILs containing various structural features (i.e., double bonds, linear thioether chains, and cyclopropanyl groups) were examined as stationary phases in comprehensive two dimensional gas chromatography (GC×GC) for the separation of nonpolar analytes in kerosene. N-alkyl-N'-methyl-imidazolium-based ILs containing different alkyl side chains were used as model structures to investigate the effects of alkyl moieties with different structural features on the selectivities and operating temperature ranges of the IL-based stationary phases. Compared to a homologous series of ILs containing saturated side chains, lipidic ILs exhibit improved selectivity toward the aliphatic hydrocarbons in kerosene. The palmitoleyl IL provided the highest selectivity compared to all other lipidic ILs as well as the commercial SUPELCOWAX 10 column. The linoleyl IL containing two double bonds within the alkyl side chain showed the lowest chromatographic selectivity. The lipidic IL possessing a cyclopropanyl group within the alkyl moiety exhibited the highest thermal stability. The Abraham solvation parameter model was used to evaluate the solvation properties of the lipidic ILs. This study provides the first comprehensive examination into the relation between lipidic IL structure and the resulting solvation characteristics. Furthermore, these results establish a basis for applying lipidic ILs as stationary phases for solute specific separations in GC×GC.

  9. Thermochemical benchmarking of hydrocarbon bond separation reaction energies: Jacob's ladder is not reversed!

    Science.gov (United States)

    Krieg, Helge; Grimme, Stefan

    2010-10-01

    We reinvestigate the performance of Kohn-Sham density functional (DF) methods for a thermochemical test set of bond separation reactions of alkanes (BSR36) published recently by Steinmann et al. [J. Chem. Theory Comput. 5, 2950 (2009)]. According to our results, the tested approximations perform for this rather special benchmark as usual. We show that the choice of reference enthalpies plays a crucial role in the assessment. Due to the large stoichiometric factors involved, errors of various origin are strongly amplified. Inconsistent reference data are avoided by computing reference energies at the CCSD(T)/CBS level. These are compared to results for a variety of standard DFs. Two different versions of London dispersion corrections (DFT-D2 and DFT-D3) are applied and found to be very significant. The most accurate results are obtained with B2GPPLYP-D2 (MAD = 0.4 kcal mol-1) B2PLYP-D2 (MAD = 0.5 kcal mol-1) and B97-D2 (MAD = 0.9 kcal mol-1 methods. Dispersion corrections not only improve the computed BSR energies but also diminish the accuracy differences between the DFs. The previous DFT-D2 version performs better due to error compensation of medium-range correlation effects between the semi-classical and the density-based description. We strongly recommend not to overinterpret results regarding DF accuracy when based on a single set of chemical reactions and to use high-level theoretical data for benchmarking purposes.

  10. Module filter for separating hydrocarbons and catalytic conversion of CO into CO sub 2. Modulfilter zur Abscheidung von Kohlenwasserstoffen und katalytischen Umwandlung von CO in CO sub 2

    Energy Technology Data Exchange (ETDEWEB)

    Hoelter, H.; Igelbuescher, H.; Gresch, H.; Dewert, H.

    1988-02-11

    A process is known for separating the hydrocarbons contained in the outside air via chemical absorption filters and for converting the CO into harmless CO{sub 2} by means of a catalyst. However, it proves to be a disadvantage that the catalyst in the CO conversion is saturated by humidity and becomes ineffective. In order to overcome this disadvantage, it is proposed, according to the invention, that a chemical absorption filter layer to separate acid harmful gases and/or those containing hydrocarbons on the clean gas side is provided with a cassette-shaped, easily replaceable catalyst layer which can be placed on it, which consists of a drying layer, preferably silica gel, and a subsequent hopkalite layer, where the cassettes are inserted in reusable transport containers which must be closed airtight. The transport containers can consist of plastic envelopes, which are provided with a damp-proof means of closing. (orig.).

  11. The contribution of polycyclic aromatic hydrocarbon fractions with different boiling ranges to the carcinogenic impact of emission condensate from coal fired residential furnaces as evaluated by topical application to the skin of mice.

    Science.gov (United States)

    Grimmer, G; Brune, H; Deutsch-Wenzel, R; Dettbarn, G; Misfeld, J; Abel, U; Timm, J

    1985-09-15

    Flue gas condensate from briquet-fired residential furnaces was separated into a polycyclic aromatic compound (PAC)-free and a PAC-containing part, followed by a subfractionation of the PAC-containing fraction into 3 parts: PAC consisting predominantly of (a) 2 and 3 rings, (b) 4 and 5 rings and (c) 6 and more rings. To evaluate the carcinogenic potency of the condensate and its fractions, local application onto skin of mice in 2 or 3 doses was used. Since it was known from an earlier investigation that both the PAC-free fraction and the fraction containing PAC with 2 and 3 rings were almost ineffective, only PAC-fractions containing more than 3 rings were tested. The probit and Weibull analysis of the results showed that the condensate and the fractions containing PAC with 4 and 5 rings as well as 6 and more rings provoke local tumors after repeated application to the dorsal skin of mice. The tumor incidence exhibited a clear cut dose-response relationship. Fractions (b) and (c) were almost equally active, each contributing by about 50% to the total carcinogenicity. The content of benzo[a]pyrene (0.72 mg/g condensate) contributed by 10-11% to the total carcinogenicity of the emission.

  12. Development of separation systems for polynuclear aromatic hydrocarbon environmental contaminants using micellar electrokinetic chromatography with molecular micelles and free zone electrophoresis.

    Science.gov (United States)

    Moy, T W; Ferguson, P L; Grange, A H; Matchett, W H; Kelliher, V A; Brumley, W C; Glassman, J; Farley, J W

    1998-09-01

    Of four systems available from the literature, based on cyclodextrins, dioctylsulfosuccinate, bile salts, and molecular micelles consisting of oligomers of undecylenic acid, the most successful separation system in our hands is based on the molecular micelles, oligomers of sodium undecylenic acid (OSUA). We have employed organic additives of acetonitrile, acetone, and tetrahydrofuran in achieving separations of polyaromatic hydrocarbons (PNAs) using molecular micelles. Generally, successful separations are achieved with 20-40% composition as the organic additive in an 8 mM borate buffer. We separated 16 PNAs with 20% tetrahydrofuran in a system of 8 mM borate and 0.125 g/10 mL (ca. 6.25 mM) of OSUA. Typical extracts of environmental samples contain additional analytes besides the typical 16 target compounds. Among these are the nitrogen-containing aromatics that can act as cations under conditions of low pH and additional compounds that can act as anions under basic conditions in free-zone electrophoresis. These additional classes of analytes are separated by capillary zone electrophoresis/laser-induced fluorescence detection using a frequency-doubled laser operated at 257 nm.

  13. Dynamic aspects of spermiogenic chromatin condensation patterning by phase separation during the histone-to-protamine transition in charalean algae and relation to bryophytes.

    Science.gov (United States)

    Kasinsky, H E; Ellis, S; Martens, G; Ausió, J

    2014-12-01

    During early-to-middle spermiogenesis in multicellular, internally fertilizing charalean green algae (Chara fibrosa, Chara vulgaris, Chara tomentosa, Nitella missouriensis), patterning of chromatin/nucleoplasm in developing spermatid nuclei changes from granules → fibers → contorted lamellae → condensed chromatin. Cytochemical, immunocytochemical, electrophoretic studies on C. vulgaris and C. tomentosa spermatids (Kwiatkowska, Poplonska) and amino acid analysis of protamines in Chara corallina sperm (Reynolds, Wolfe), indicate that more positively charged protamines replace histones directly during spermiogenesis, not indirectly through other intermediate transitional proteins as in internally fertilizing neogastropods and sharks with more ordered spermatid lamellae. We hypothesize that such lamellar-mediated patterning is due to liquid-liquid phase separation by spinodal decomposition. This is a spontaneous thermodynamic process that involves diffusive instability of a lamellar chromatin network, a dominant pattern repeat distance and bicontinuity of chromatin/nucleoplasm phases. C. vulgaris sperm show contorted lamellae in the posterior region, whereas C. corallina sperm display contorted peripheral lamellae and interior fibrils. Among internally fertilizing liverworts, which may have evolved from Zygnematales, mid-spermatid nuclei lack lamellae. Instead they display self-coiled chromatin rods in Blasia pusilla, contain short chromatin tubules in Haplomitrium hookeri resembling those in internally fertilizing mosses and a hornwort and indirectly replace histones with protamines in Marchantia polymorpha.

  14. A supermolecular building layer approach for gas separation and storage applications: The eea and rtl MOF platforms for CO2 capture and hydrocarbon separation

    KAUST Repository

    Chen, Zhijie

    2015-01-01

    The supermolecular building layer (SBL) approach was employed to deliberately synthesize five novel metal-organic frameworks (1-5) with an exposed array of amide or amine functionalities within their pore system. The ability to decorate the pores with nitrogen donor moieties offers potential to evaluate/elucidate the structure-adsorption property relationship. Two MOF platforms, eea-MOF and rtl-MOF, based on pillaring of kgm-a or sql-a layers with heterofunctional 3-connected organic building blocks were targeted and constructed to purposely introduce and expose the desired amide or amine functionalities. Interestingly, gas adsorption properties of eea-MOF-4 (1) and eea-MOF-5 (2) showed that by simply altering the nitrogen donor position within the ligand, it is possible to relatively reduce the pore size of the related eea-MOF material and subsequently increase the associated CO2 uptake. The slightly confined pore space in 2, relative to 1, has enabled an enhancement of the pore local charge density and thus the observed relative increase in the CO2 and H2 isosteric heat of adsorption (Qst). In addition, light hydrocarbon adsorption studies revealed that 2 is more selective toward C2H6 and C3H8 over CH4 than 1, as exemplified for C2H6:CH4 (5:95) or C3H8:CH4 (5:95) binary gas mixtures. This journal is

  15. A supermolecular building layer approach for gas separation and storage applications: the eea and rtl MOF platforms for CO 2 capture and hydrocarbon separation

    KAUST Repository

    Chen, Zhijie

    2015-02-11

    The supermolecular building layer (SBL) approach was employed to deliberately synthesize five novel metal–organic frameworks (1–5) with an exposed array of amide or amine functionalities within their pore system. The ability to decorate the pores with nitrogen donor moieties offers potential to evaluate/elucidate the structure–adsorption property relationship. Two MOF platforms, eea-MOF and rtl-MOF, based on pillaring of kgm-a or sql-a layers with heterofunctional 3-connected organic building blocks were targeted and constructed to purposely introduce and expose the desired amide or amine functionalities. Interestingly, gas adsorption properties of eea-MOF-4 (1) and eea-MOF-5 (2) showed that by simply altering the nitrogen donor position within the ligand, it is possible to relatively reduce the pore size of the related eea-MOF material and subsequently increase the associated CO2 uptake. The slightly confined pore space in 2, relative to 1, has enabled an enhancement of the pore local charge density and thus the observed relative increase in the CO2 and H2 isosteric heat of adsorption (Qst). In addition, light hydrocarbon adsorption studies revealed that 2 is more selective toward C2H6 and C3H8 over CH4 than 1, as exemplified for C2H6 : CH4 (5 : 95) or C3H8 : CH4 (5 : 95) binary gas mixtures.

  16. Separation and identification of hydrocarbons and other volatile compounds from cultures of Aspergillus niger by GC–MS using two different capillary columns and solvents

    Directory of Open Access Journals (Sweden)

    Shafiquzzaman Siddiquee

    2015-05-01

    Full Text Available A simple, fast, repeatable, and less laborious sample-preparation protocol based on gas chromatography–mass spectrometry was developed and applied for the analysis of bioactive compounds derived from the filamentous fungus Aspergillus niger strain SS10. The match factors for the spectra of the samples with reference to the mass-spectral library of fungal volatile compounds were determined and used to study the complex hydrocarbons and other volatile compounds that were separated using two different capillary columns and nonpolar and medium-polar stationary phases. More than 295 volatile compounds (spectral match factor of at least 90%, such as normal saturated hydrocarbons (C7–C30, cyclohexane, cyclopentane, fatty acids, alcohols, esters, sulfur- and bromo-containing compounds, simple pyrane, and benzene derivatives, were identified. Most of these compounds have not been reported earlier. The method described in this article is a suitable research tool for the determination of volatile compounds from the cultures of A. niger.

  17. Multi-component transport in polymers: hydrocarbon / hydrogen separation by reverse selectivity membrane; Transport multi-composants dans les polymeres: separation hydrocarbures / hydrogene par membrane a selectivite inverse

    Energy Technology Data Exchange (ETDEWEB)

    Mauviel, G.

    2003-12-15

    Hydrogen separation by reverse selectivity membranes is investigated. The first goal is to develop materials showing an increased selectivity. Silicone membranes loaded with inorganic fillers have been prepared, but the expected enhancement is not observed. The second goal is to model the multi- component transport through rubbers. Indeed the permeability model is not able to predict correctly permeation when a vapour is present. Thus many phenomena have to be considered: diffusional inter-dependency, sorption synergy, membrane swelling and drag effect. The dependence of diffusivities with the local composition is modelled according to free-volume theory. The model resolution allows to predict the permeation flow-rates of mixed species from their pure sorption and diffusion data. For the systems under consideration, the diffusional inter-dependency is shown to be preponderant. Besides, sorption synergy importance is pointed out, whereas it is most often neglected. (author)

  18. Hydrocarbon pneumonia

    Science.gov (United States)

    Pneumonia - hydrocarbon ... Coughing Fever Shortness of breath Smell of a hydrocarbon product on the breath Stupor (decreased level of ... Most children who drink or inhale hydrocarbon products and develop ... hydrocarbons may lead to rapid respiratory failure and death.

  19. Water Condensation

    DEFF Research Database (Denmark)

    Jensen, Kasper Risgaard; Fojan, Peter; Jensen, Rasmus Lund

    2014-01-01

    The condensation of water is a phenomenon occurring in multiple situations in everyday life, e.g., when fog is formed or when dew forms on the grass or on windows. This means that this phenomenon plays an important role within the different fields of science including meteorology, building physics......, and chemistry. In this review we address condensation models and simulations with the main focus on heterogeneous condensation of water. The condensation process is, at first, described from a thermodynamic viewpoint where the nucleation step is described by the classical nucleation theory. Further, we address...

  20. High storage capacity and separation selectivity for C2hydrocarbons over methane in the metal-organic framework Cu-TDPAT

    KAUST Repository

    Liu, Kang

    2014-01-01

    We report on the storage capacity and separation selectivity of an rht-type metal-organic framework, Cu-TDPAT [TDPAT = 2,4,6-tris(3,5-dicarboxylphenylamino)-1,3,5-triazine], for C2hydrocarbons over CH4. Henry\\'s constant, the isosteric heat of adsorption and the ideal adsorbed solution theory selectivity were calculated based on single-component sorption isotherms. Theoretical calculations indicate that both the open metal sites and the Lewis basic sites have strong interactions with the C2molecules. The combination of these two kinds of sites lead to the highest C2H2-CH4selectivity of 127.1 as well as record high values for C2H4adsorption enthalpies. To mimic real-world conditions, breakthrough experiments were conducted on an equimolar four-component mixture containing C2H2, C2H4, C2H6and CH4at room temperature and 1 atm pressure. Our results show that Cu-TDPAT is a promising candidate for CH4capture and purification. This journal is

  1. Identification and separation of the organic compounds in coal-gasification condensate waters. [5,5 dimethyl hydantoin, dihydroxy benzenes, acetonitrile

    Energy Technology Data Exchange (ETDEWEB)

    Mohr, D.H. Jr.; King, C.J.

    1983-08-01

    A substantial fraction of the organic solutes in condensate waters from low-temperature coal-gasification processes are not identified by commonly employed analytical techniques, have low distriution coefficients (K/sub C/) into diisopropyl ether (DIPE) or methyl isobutyl ketone (MIBK), and are resistant to biological oxidation. These compounds represent an important wastewater-treatment problem. Analytical techniques were developed to detect these polar compounds, and the liquid-liquid phase equilibria were measured with several solvents. A high-performance liquid - chromatography (HPLC) technique was employed to analyze four condensate-water samples from a slagging fixed-bed gasifier. A novel sample-preparation technique, consisting of an azeotropic distillation with isopropanol, allowed identification of compounds in the HPLC eluant by combined gas chromatography and mass spectrometry. 5,5-dimethyl hydantoin and related compounds were identified in condensate waters for the first time, and they account for 1 to 6% of the chemical oxygen demand (COD). Dimethyl hydatoin has a K/sub D/ of 2.6 into tributyl phosphate (TBP) and much lower K/sub D/ values into six other solvents. It is also resistant to biological oxidation. Phenols (59 to 76% of the COD), dihydroxy benzenes (0.02 to 9.5% of the COD), and methanol, acetonitrile, and acetone (15% of the COD in one sample) were also detected. Extraction with MIBK removed about 90% of the COD. MIBK has much higher K/sub D/ values than DIPE for dihydroxy benzenes. Chemical reactions occurred during storage of condensate-water samples. The reaction products had low K/sub D/ values into MIBK. About 10% of the COD had a K/sub D/ of nearly zero into MIBK. These compounds were not extracted by MIBK over a wide range of pH. 73 references, 6 figures, 35 tables.

  2. Condensed matter physics

    CERN Document Server

    Isihara, A

    2007-01-01

    More than a graduate text and advanced research guide on condensed matter physics, this volume is useful to plasma physicists and polymer chemists, and their students. It emphasizes applications of statistical mechanics to a variety of systems in condensed matter physics rather than theoretical derivations of the principles of statistical mechanics and techniques. Isihara addresses a dozen different subjects in separate chapters, each designed to be directly accessible and used independently of previous chapters. Topics include simple liquids, electron systems and correlations, two-dimensional

  3. Part I: C2sbnd C4 hydrocarbons separation addressed via molecular cluster models carved out from periodic MOF-74-Mg/Zn structures

    Science.gov (United States)

    Degaga, Gemechis D.; Valenzano, Loredana

    2016-09-01

    Selective sorption of hydrocarbons by tunable sorbents such as metal-organic frameworks is the most promising alternative to traditional cryogenic distillation. Here, density functional theory is used to investigate the selective sorption of C2sbnd C4 hydrocarbons by MOF-74-Mg/Zn via periodic and molecular cluster calculations. Both methods agree in showing significant differences in binding energies between olefins and paraffins at the open metal sites of the MOF. The binding energies found using molecular cluster models, however, are significantly smaller than those obtained from the periodic approach, exemplifying the importance of fully accounting for the chemical environment experienced by the adsorbed hydrocarbons.

  4. Condensed matter physics

    CERN Document Server

    Marder, Michael P

    2010-01-01

    This Second Edition presents an updated review of the whole field of condensed matter physics. It consolidates new and classic topics from disparate sources, teaching not only about the effective masses of electrons in semiconductor crystals and band theory, but also about quasicrystals, dynamics of phase separation, why rubber is more floppy than steel, granular materials, quantum dots, Berry phases, the quantum Hall effect, and Luttinger liquids.

  5. Diseño y Acondicionamiento de un Condensador-Separador en Sistema de Destilación de Ácidos Grasos Design and Improvement of a Condenser-Separator in a Fatty Acid Distillation System

    Directory of Open Access Journals (Sweden)

    D. Moreno-Juárez

    2005-01-01

    Full Text Available En este trabajo se presenta una solución al problema de una torre de destilación de ácidos grasos en donde las pérdidas de grasa son considerables, por arrastres hacia el sistema de vacío y por arrastres de ligeros con el destilado. Además, las emisiones contaminantes y la inestabilidad al color de los productos, hacen necesaria una re-destilación. Para esto se diseña un condensador-separador el cual se incorpora a la torre para asegurar la separación de los componentes ligeros. Se introducen una serie de cambios de diseño y operación para mejorar la eficiencia del proceso y la calidad del destilado. El condensador-separador diseñado permite reducir las pérdidas de grasa en efluentes y disminuye el costo del tratamiento del agua de enfriamiento.This study presents a solution of some problems occurring in a fatty acid distillation column in which considerable losses of fatty acids occur by suction into the vacuum system as well as losses of light fatty acids in the distillation step. Also, the polluting emissions and the color instability of the products require that they be re-distilled. For this, a condenser-separator which was installed in the column to assure separation of the lighter fractions was designed. A series of changes in the design and operation for improving the efficiency of the process and the quality of the distillate were introduced. The condenser-separator designed allowed reducing the losses of fat in effluents and lowered the cost of treating the cooling water.

  6. Condensation Polymerization

    Indian Academy of Sciences (India)

    S Ramakrishnan

    2017-04-01

    The very idea that large polymer molecules can indeed existwas hotly debated during the early part of the 20th century.As highlighted by Sivaram in his articles on Carothersand Flory, Staudinger’s macromolecular hypothesis was finallyaccepted, and the study of polymers gained momentumbecause of the remarkable efforts of the these two individualswho laid down the foundations concerning the processes thatled to the formation of large polymer molecules, and to thosethat led to an understanding of many of their extraordinaryphysical properties. Condensation polymerizations, as thename suggests, utilizes bond-forming reactions that generatea small molecule condensate, which often needs to be continuouslyremoved to facilitate the formation of the polymer. Inthis article, I shall describe some of the essential principles ofcondensation polymerizations or more appropriately calledstep-growth polymerizations; and I will also describe someinteresting extensions that lead to the formation of polymernetworks and highly branched polymers.

  7. Presence of Siloxanes in the Biogas of a Wastewater Treatment Plant Separation in Condensates and Influence of the Dose of Iron Chloride on its Elimination

    Energy Technology Data Exchange (ETDEWEB)

    Mariano, García [Empresa Mixta de Aguas Residuales de Alicante, S.A. (EMARASA) (Spain); Daniel, Prats; Arturo, Trapote, E-mail: atj@ua.es [University Institute of Water and Environmental Sciences, University of Alicante (Spain)

    2015-12-21

    The siloxanes present in the biogas produced during anaerobic digestion damage the mechanism of cogeneration equipment and, consequently, negatively affect the energy valorization process. For this reason, the detection and elimination of these silicon-derived chemical compounds are a priority in the management of cogeneration facilities. In this regard, the objectives of this paper are, firstly, to characterize the siloxanes in the biogas and, secondly, to qualitatively evaluate the influence of the dose of iron chloride on its elimination. The research was performed at the Rincón de León Wastewater Treatment Plant (Alicante, Spain). The outflow biogas of the digesters and of the pressurized gasometers was sampled and analyzed. The results obtained made it possible to demonstrate, firstly, the absence of linear siloxanes and that, of the cyclic siloxanes, the predominant type was decamethylcyclopentasiloxane, and, secondly, that the addition of iron chloride in the digesters significantly reduces the siloxane content in the biogas. Additionally, it was demonstrated that the process of compression of the biogas, with the elimination of condensates, also produces significant reductions in the concentration of siloxanes in the biogas.

  8. Condensed Matter Physics

    Science.gov (United States)

    Marder, Michael P.

    2000-01-01

    A modern, unified treatment of condensed matter physics This new work presents for the first time in decades a sweeping review of the whole field of condensed matter physics. It consolidates new and classic topics from disparate sources, teaching "not only about the effective masses of electrons in semiconductor crystals and band theory, but also about quasicrystals, dynamics of phase separation, why rubber is more floppy than steel, electron interference in nanometer-sized channels, and the quantum Hall effect." Six major areas are covered---atomic structure, electronic structure, mechanical properties, electron transport, optical properties, and magnetism. But rather than defining the field in terms of particular materials, the author focuses on the way condensed matter physicists approach physical problems, combining phenomenology and microscopic arguments with information from experiments. For graduate students and professionals, researchers and engineers, applied mathematicians and materials scientists, Condensed Matter Physics provides: * An exciting collection of new topics from the past two decades. * A thorough treatment of classic topics, including band theory, transport theory, and semiconductor physics. * Over 300 figures, incorporating many images from experiments. * Frequent comparison of theory and experiment, both when they agree and when problems are still unsolved. * More than 50 tables of data and a detailed index. * Ample end-of-chapter problems, including computational exercises. * Over 1000 references, both recent and historically significant.

  9. A new type mixture refrigeration auto-cascade cycle with partial condensation and separation reflux exchanger and its preliminary experimental test

    Science.gov (United States)

    Wu, J. F.; Gong, M. Q.; Liu, J. L.; Luo, E. C.; Qi, Y. F.; Hu, Q. G.

    2002-05-01

    A new type of mixture refrigeration cycle with reflux exchanger is presented in this paper. In this cycle, a new type of L-V separator with inner heat and mass transfer is employed to replace the combination of conventional L-V separator or complicated rectifier and succeeding heat exchanger used in traditional auto-cascade cycle or Kleemenko cycle. A prototype is developed based on this refrigeration cycle. The thermodynamic performance is discussed as well as some other specifications such as cost, reliability, etc. The experimental results show that this prototype can reach 74 W at 135 K and 265 W at 171 K with a nominal input power of 1.5 HP.

  10. Process for simultaneously processing of used metal and/or metal scrap and scrap containing halogenated hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Dapper, G.; Kirchner, W.; Sloterdijk, W.; Verbraak, C.A.

    1982-03-02

    A process is presened for reducing environmental pollution resulting from disposal of waste containing halogenated hydrocarbons by simultaneous treatment with used metal and/or metal scrap at elevated temperatures. The halogenated hydrocarbons are pyrolyzed and the resulting hydrogen halide containing gas is brought into contact with the used metal and/or metal scrap at elevated temperatures so as to form metal halogenides that are volatile under the conditions applied. The volatile metal halogenides are largely separated from the gaseous mixture formed, and at least part of the remaining gaseous mixture and/or hydrocarbon residue is used as fuel to maintain the required temperature. The waste feed compositions and process conditions can be chosen to effect separation between various metals by selective halogenation and condensation, and substantially all of the hydrogen halide can be tied up and recovered as metal halogenides.

  11. Micro-column convenient chromatography for separation of aromatic hydrocarbon compound and GC/IRMS analysis%芳烃单体烃 GC/IRMS 分析分离的便捷柱色谱法

    Institute of Scientific and Technical Information of China (English)

    陈祖林; 张敏; 刘海钰

    2013-01-01

      介绍了一种方便快捷、经济成本低,可将芳烃馏分中的萘系和菲系化合物进行快速分离的小型柱色谱法。通过 GC-MS 分析检测结果表明,此方法可将芳烃中的萘系和菲系化合物得到分离和纯化富集,解决了总芳烃馏分在气相色谱易出现的 UCM 鼓包和多取代基萘系物和菲系物的共溢出现象。并通过 GC-IRMS 分析萘系和菲系化合物中单体烃碳同位素值检测,取得了很好的效果。此方法试剂用量少、分析步骤简单快捷,可用于芳烃馏分单体烃碳同位素分析的前处理中。%An easy and economic method to separate alkylated napthalenes and alkylated phenanthrenes from aromatic hydrocarbons was introduced in this paper. The GC-MS tests showed that this method could provide a complete and enriched separation of alkylated napthalenes and alkylated phenanthrenes from crude oils and sedimentary samples, solving the problem that several methyls were difficult to determine accurately by GC-MS tests because of heavy co-elution and laying the foundation for free carbon isotope tests. As an application, this method can be used for aromatic hydrocarbons of monomer hydrocarbon carbon isotope analysis of pre treatment.

  12. Selective separation of aromatic hydrocarbons from low temperature coal tar%低温煤焦油中特定芳烃组分的选择性分离

    Institute of Scientific and Technical Information of China (English)

    姜广策; 张生娟; 王永刚; 王中奇; 林雄超; 许德平

    2015-01-01

    以研究低温煤焦油中特定芳烃组分的选择性分离为目标,通过预处理分离酚类化合物和富集特定芳烃组分,采用多元溶剂萃取方法选择性分离芳烃和非芳烃组分,采用Hansen溶度参数理论进行多元溶剂的设计和萃取条件的优化。结果表明,溶剂对原料焦油的选择性随Hansen溶度参数“距离”(Ra)增加而增大,萃取能力则相反。研究得到的多元萃取剂是含水量为体积分数6%的 N,N-二甲基甲酰胺溶液,优化萃取条件是温度25℃、剂/油比6:1。萃余物经多次萃取进一步分离芳烃组分,萃出物经甲酰胺多次萃取以分离出杂环化合物和极性组分。芳烃组分在最终分离产物中的质量分数为94%,其总萃取收率为95%。另外非芳烃化合物、杂环化合物和其他极性组分也在本过程中得到了有效富集。%This study was to achieve selective separation of specific aromatic hydrocarbons from low temperature coal tar. The feedstock was pretreated to separate phenols and enrich specific aromatic hydrocarbons, and then extracted by multiple solvents to separate selectively aromatic and non-aromatic hydrocarbons. The extraction conditions were optimized by the theory of Hansen solubility parameter. Selectivity of the extraction process was enhanced with the rise of Hansen solubility distance (Ra), while dissolving capacity decreased with the increase of Ra. The multiple solvents suggested in the study were dimethyl formamide (DMF)+6%water (volume fraction), and the optimized extraction condition was 25℃ and solvent/oil ratio of 6:1. The raffinate was extracted repeatedly under the optimized condition to collect residual aromatic hydrocarbons. The extract was extracted by formamide repeatedly to increase the concentration of aromatics and separate heterocyclic compounds and other polar components. Consequently, the mass percentage of aromatic hydrocarbons in the product was ca. 95%and the

  13. Organic geochemistry of oils and condensates in the Kekeya field, southwest depression of the Tarim Basin (China)

    Energy Technology Data Exchange (ETDEWEB)

    Maowen Li; Snowdon, L.R. [Geological Survey of Canada, Calgary (Canada); Renzi Lin; Peirong Wang [Jianghan Petroleum Institute, Hubei (China); Yongsheng Liao; Peilong Li [Shengli Petroleum Administrative Bureau, Shandong (China)

    1999-07-01

    This study shows that the oils and condensates in the Kekeya Field in the Tarim Basin, NW China, belong to a single family, most likely derived from marine shale source rocks deposited under oxic-suboxic conditions with mixed terrigenous and algal-bacterial organic inputs. The maturity data clearly indicate that the paraffinic condensates were not formed by thermal cracking of oil during late catagenesis (R{sub o} > 1.2%). Both the oils and condensates were generated within the normal oil window, whereas addition of gaseous hydrocarbons from a separate source resulted in migration fractionation and hence spuriously high heptane indices. Age specific biomarkers show that the oils and condensates were not generated from the Mesozoic-Cenozoic strata, but from the Carboniferous-Permian sections. 1D basin modelling results are consistent with this interpretation, suggesting that the Mesozoic-Eocene strata are currently immature with respect to hydrocarbon generation and expulsion. Deep-seated faults may have provided routes for upward fluid migration at the time of active deformation during several pulses of the Himalayan orogeny. The favoured targets for further petroleum exploration in front of the Kunlun Mountains include the deep structures within the Carboniferous-Permian strata for indigenous petroleum accumulations and anticlines and stratigraphic traps within the Mesozoic-Cenozoic sections that are cut by deep-seated thrust faults where secondary petroleum accumulations most likely occurred. (author)

  14. Condensation heat transfer

    Science.gov (United States)

    Rose, J. W.

    The paper gives a brief description of some of the better understood aspects of condensation heat transfer and includes discussion of the liquid-vapour interface, natural and forced convection laminar film condensation and dropwise condensation.

  15. DEVELOPMENT OF SEPARATION SYSTEMS FOR POLYNUCLEAR AROMATIC HYDROCARBON ENVIRONMENTAL CONTAMINANTS USING MICELLAR ELECTROKINETIC CHROMATOGRAPHY WITH MOLECULAR MICELLES AND FREE ZONE ELECTROPHORESIS

    Science.gov (United States)

    Of four systems available from the literature, based on cyclodextrins, dioctylsulfosuccinate, bile salts, and molecular micelles consisting of oligomers of undecylenic acid, the most successful separation system in our hands is based on the molecular micelles, oligomers of sodiu...

  16. Shape selective properties of the Al-fumarate metal-organic framework in the adsorption and separation of n-alkanes, iso-alkanes, cyclo-alkanes and aromatic hydrocarbons.

    Science.gov (United States)

    Bozbiyik, Belgin; Lannoeye, Jeroen; De Vos, Dirk E; Baron, Gino V; Denayer, Joeri F M

    2016-01-28

    The primary goal of this work is to study the adsorption of a wide range of hydrocarbon adsorbates in the Al-fumarate metal-organic framework in order to identify and explore trends in adsorption behaviour that can be related to the sorbate's molecular properties and as well as the properties of this MOF. The pulse chromatographic technique was used to study the adsorption properties of C5-C8 linear, branched, cyclic and aromatic hydrocarbons in vapour phase at low coverage and at high temperatures (150-250 °C). Chromatograms of alkanes having the same number of carbon atoms (C5-C8) clearly show that the linear alkane is retained the longest over its branched and cyclic isomers. Moreover, xylene isomers are also clearly separated by Al-fumarate, with retention times increasing in the order: ortho-xylene adsorption enthalpy of more than 10 kJ mol(-1) between linear alkanes and their di/tri-branched or cyclo-alkane isomers were observed, clearly showing that steric effects imposed by the pore structure of the adsorbent cause the difference in adsorption between linear alkanes and their isomers. In conclusion, Al-fumarate behaves as a shape selective material with respect to structural isomers of linear alkanes, with properties resembling those of medium pore size zeolites.

  17. Bio-oil fractionation and condensation

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Robert C.; Jones, Samuel T.; Pollard, Anthony

    2017-04-04

    The present invention relates to a method of fractionating bio-oil vapors which involves providing bio-oil vapors comprising bio-oil constituents. The bio-oil vapors are cooled in a first stage which comprises a condenser having passages for the bio-oil separated by a heat conducting wall from passages for a coolant. The coolant in the condenser of the first stage is maintained at a substantially constant temperature, set at a temperature in the range of 75 to 100.degree. C., to condense a first liquid fraction of liquefied bio-oil constituents in the condenser of the first stage. The first liquid fraction of liquified bio-oil constituents from the condenser in the first stage is collected. Also disclosed are steps for subsequently recovering further liquid fractions of liquefied bio-oil constituents. Particular compositions of bio-oil condensation products are also described.

  18. Bio-oil fractionation and condensation

    Science.gov (United States)

    Brown, Robert C; Jones, Samuel T; Pollard, Anthony

    2013-07-02

    A method of fractionating bio-oil vapors which involves providing bio-oil vapors comprising bio-oil constituents is described. The bio-oil vapors are cooled in a first stage which comprises a condenser having passages for the bio-oil separated by a heat conducting wall from passages for a coolant. The coolant in the condenser of the first stage is maintained at a substantially constant temperature, set at a temperature in the range of 75 to 100.degree. C., to condense a first liquid fraction of liquefied bio-oil constituents in the condenser of the first stage. The first liquid fraction of liquified bio-oil constituents from the condenser in the first stage is collected. Also described are steps for subsequently recovering further liquid fractions of liquefied bio-oil constituents. Particular compositions of bio-oil condensation products are also described.

  19. Condensation in Saturn's Stratospheric Haze Layers

    Science.gov (United States)

    Barth, Erika L.; Moses, Julianne I.

    2016-10-01

    Haze particles in Saturn's stratosphere can be seen in the visible limb images of Cassini's Imaging Science Subsystem (ISS). These hazes are likely a mix of particles, including solid organics formed as a result of methane photolysis and electron deposition, as well as the condensation of water and hydrocarbon ices. We have examined data from both Cassini and Voyager to study the detailed vertical structure of absorbing/scattering particulates in Saturn's stratosphere and developed a Saturn version of the Community Aerosol and Radiation Model for Atmospheres (CARMA), adding a large database of hydrocarbons that are observed or expected to be present in Saturn's atmosphere.Our modeling indicates that water ice condenses independently of the hydrocarbons to form a thin layer above the 0.1 mbar pressure level. Between about 5 and 50 mbar, the hydrocarbons reach their condensation levels (in order of increasing pressure level): C6H6, C5H12, C4H2, C4H10, and C2H2. Because of the proximity of their condensation levels and due to the gravitational settling of the particles, the hydrocarbons are likely condensing on one another and forming a thicker layer of mixed composition. Interestingly, butane (C4H10) has a triple point around 135 K which is much lower than most of the other condensing species we've explored. Given an approximate condensation level of 10 mbar and the observed temperature changes at this pressure level following the December 2010 northern-hemisphere storm (stratospheric temperatures were elevated by as much as 50-70 K in a region near 40° N latitude.), melting and further nucleation of droplets could be occurring.A number of factors including temperature profile, vapor pressure equation, volatile abundance, nucleation critical saturation, and coagulation efficiency will affect the altitudes of the individual ice layers. We will present a summary of results following the nucleation and growth of compounds in order to quantify the likely size and

  20. Enrichment of light hydrocarbon mixture

    Science.gov (United States)

    Yang; Dali; Devlin, David; Barbero, Robert S.; Carrera, Martin E.; Colling, Craig W.

    2010-08-10

    Light hydrocarbon enrichment is accomplished using a vertically oriented distillation column having a plurality of vertically oriented, nonselective micro/mesoporous hollow fibers. Vapor having, for example, both propylene and propane is sent upward through the distillation column in between the hollow fibers. Vapor exits neat the top of the column and is condensed to form a liquid phase that is directed back downward through the lumen of the hollow fibers. As vapor continues to ascend and liquid continues to countercurrently descend, the liquid at the bottom of the column becomes enriched in a higher boiling point, light hydrocarbon (propane, for example) and the vapor at the top becomes enriched in a lower boiling point light hydrocarbon (propylene, for example). The hollow fiber becomes wetted with liquid during the process.

  1. 费托合成高温油相产品中正构烃的分离%Separation of n-hydrocarbons from high temperature oil phase products of Fischer-Tropsch synthesis

    Institute of Scientific and Technical Information of China (English)

    王燕; 葛喜慧; 张敏卿; 朱怀工; 张子建; 王明

    2014-01-01

    The simulated high temperature oil phase products of Fischer-Tropsch synthesis were taken as raw materials and the urea inclusion method was used to separate n-hydrocarbons from the raw materials. The effects of activators,inclusion reaction conditions and unpacked reaction conditions on n-hydrocarbons separation were studied. Orthogonal experimental study showed that ethanol was a suitable activator and the optimal reaction conditions for inclusion were:reaction temperature 5 ℃, reaction time 1h,based on 1g raw materials,amount of urea 2.75g,amount of ethano 3.5mL,amount of water 1.125mL. Under the optimal reaction conditions,recovery rate of 1-decene was 87.75%and that of n-decane was 89.90%. The unpacked reaction results of inclusion complex illustrated that presence of water was conducive to the unpacked reaction and recovery rate of n-hydrocarbons was higher than without water. When water consumption reached 100 mL,the unpacked reaction of inclusion complex was completed.%以模拟的费托合成高温油相产品为原料,采用尿素包合法从原料中分离正构烃。考察了活化剂的种类、包合反应条件、解包合反应条件等对正构烃分离效果的影响。通过正交实验研究,结果表明:乙醇为较适宜的活化剂;较优反应条件为反应温度5℃,反应时间60min,以1g原料为基准,尿素用量2.75g,乙醇用量3.5mL,水用量1.125mL。在此包合反应条件下,得到1-癸烯的回收率为87.75%,正癸烷的回收率为89.90%。尿素包合物的解包合反应实验结果说明,水的存在有利于解包合反应的进行,得到正构烃回收率较高。用水量为100 mL时,尿素包合物的解包合反应基本完成。

  2. Asymmetric Hollow Fiber Membranes for Separation of CO 2 from Hydrocarbons and Fluorocarbons at High-Pressure Conditions Relevant to C 2 F 4 Polymerization

    KAUST Repository

    Kosuri, Madhava R.

    2009-12-02

    Separation of high-pressure carbon dioxide from fluorocarbons is important for the production of fluoropolymers such as poly(tetrafluoroethylene). Typical polymeric membranes plasticize under high CO2 partial pressure conditions and fail to provide adequate selective separations. Torlon, a polyamide-imide polymer, with the ability to form interchain hydrogen bonding, is shown to provide stability against aggressive CO2 plasticization. Torlon membranes in the form of asymmetric hollow fibers (the most productive form of membranes) are considered for an intended separation of CO 2/C2F4. To avoid safety issues with tetrafluoroethylene (C2F4), which could detonate under testing conditions, safer surrogate mixtures (C2H2F 2 and C2H4) are considered in this paper. Permeation measurements (at 35 °C) indicate that the Torlon membranes are not plasticized even up to 1250 psi of CO2. The membranes provide mixed gas CO2/C2H2F2 and CO 2/C2H4 selectivities of 100 and 30, respectively, at 1250 psi partial pressures of CO2. On the basis of the measured separation performances of CO2/C2H 2F2 and CO2/C2H4 mixtures, the selectivity of the CO2/C2F4 mixture is expected to be greater than 100. Long-term stability studies indicate that the membranes provide stable separations over a period of 5 days at 1250 psi partial pressures of CO2, thereby making the membrane approach attractive. © 2009 American Chemical Society.

  3. Membrane systems for energy efficient separation of light gases

    Energy Technology Data Exchange (ETDEWEB)

    Devlin, D.J.; Archuleta, T.; Barbero, R. [Los Alamos National Lab., NM (United States)] [and others

    1997-04-01

    Ethylene and propylene are two of the largest commodity chemicals in the United States and are major building blocks for the petrochemicals industry. These olefins are separated currently by cryogenic distillation which demands extremely low temperatures and high pressures. Over 75 billion pounds of ethylene and propylene are distilled annually in the US at an estimated energy requirement of 400 trillion BTU`s. Non-domestic olefin producers are rapidly constructing state-of-the-art plants. These energy-efficient plants are competing with an aging United States olefins industry in which 75% of the olefins producers are practicing technology that is over twenty years old. New separation opportunities are therefore needed to continually reduce energy consumption and remain competitive. Amoco has been a leader in incorporating new separation technology into its olefins facilities and has been aggressively pursuing non-cryogenic alternatives to light gas separations. The largest area for energy reduction is the cryogenic isolation of the product hydrocarbons from the reaction by-products, methane and hydrogen. This separation requires temperatures as low as {minus}150{degrees}F and pressures exceeding 450 psig. This CRADA will focus on developing a capillary condensation process to separate olefinic mixtures from light gas byproducts at temperatures that approach ambient conditions and at pressures less than 250 psig; this technology breakthrough will result in substantial energy savings. The key technical hurdle in the development of this novel separation concept is the precise control of the pore structure of membrane materials. These materials must contain specially-shaped channels in the 20-40A range to provide the driving force necessary to remove the condensed hydrocarbon products. In this project, Amoco is the technology end-user and provides the commercialization opportunity and engineering support.

  4. Condensed Geometry

    CERN Document Server

    Kabe, Koustubh

    2010-01-01

    A spin (dependent) system treatment of gravity is adopted akin to the Sen-Ashtekar treatment. Time is reinserted into the space ``fluid'' at the quantum Level. This time - the Lorentzian one- is shown to be a vorticity of a ``fluid particle'' of the space and the effect is integrated over all the fluid particles to incorporate time in quantum gravity. This spacetime is viewed as a fluid of future light cones called the SU(2) dipoles of causality here in the paper.The future light cone structure is soldered internally to the new variables derived in this paper to accomodate a background free physics of quantum strings. The emergence of spacetime is shown to be a first order phase transition and that of separation of gravity from the unified field to be a second order phase transition. For the former case the cosmic time is chosen as the order parameter and for the latter case the angular momentum is chosen as the order parameter. A quantum blackhole thus nucleates at transition temperature which is the Planck ...

  5. A laser-induced fluorescence dual-fiber optic array detector applied to the rapid HPLC separation of polycyclic aromatic hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Hart, Sean J.; Hall, Gregory J.; Kenny, Jonathan E. [Tufts University, Chemistry Department, Medford, MA, (United States)

    2002-01-01

    A multi-channel detection system utilizing fiber optics has been developed for the laser-induced fluorescence (LIF) analysis of chromatographic eluents. It has been applied to the detection of polycyclic aromatic hydrocarbons (PAH) in a chromatographically overlapped standard mixture and to a complex soil sample extract obtained during fieldwork. The instrument utilizes dual-fiber optic arrays, one to deliver multiple excitation wavelengths (258-342 nm) generated by a Raman shifter, and the other to collect fluorescence generated by the sample at each excitation wavelength; the collected fluorescence is dispersed and detected with a spectrograph/CCD combination. The resulting data were arranged into excitation emission matrices (EEM) for visualization and data analysis. Rapid characterization of PAH mixtures was achieved under isocratic chromatographic conditions (1.5 mL min{sup -1} and 80% acetonitrile in water), with mid {mu}g L{sup -1} detection limits, in less than 4 minutes. The ability of the instrument to identify co-eluting compounds was demonstrated by identifying and quantifying analytes in the rapid analysis of a 17 component laboratory-prepared PAH mixture and a soil extracted sample. Identification and quantification were accomplished using rank annihilation factor analysis (RAFA) using pure component standards and the EEMs of mixtures measured during the rapid high-performance liquid chromatography (HPLC) method as the unknowns. The percentage errors of the retention times (RTs) determined using RAFA compared to the known RTs measured with a standard absorbance detector were between 0 and 11%. For the standard PAH mixture, all 17 components were identified correctly and for the soil extracted sample, all 8 analytes present were correctly identified with only one false positive. Overall, the system achieved excellent qualitative performance with semi-quantitative results in the concentration predictions of both the standard mixture and the real

  6. A validated liquid chromatographic method for the determination of polycyclic aromatic hydrocarbons in honey after homogeneous liquid-liquid extraction using hydrophilic acetonitrile and sodium chloride as mass separating agent.

    Science.gov (United States)

    Koltsakidou, Anastasia; Zacharis, Constantinos K; Fytianos, Konstantinos

    2015-01-16

    In the present report, a simple and cost-effective method for the determination of twelve US EPA priority polycyclic aromatic hydrocarbons (PAHs) in honey samples after salting-assisted liquid-liquid extraction and UHPLC with fluorescence detection is proposed. The sample treatment is based on the usage of hydrophilic acetonitrile as extraction solvent and its phase separation under high salinity conditions. Due to the high sugar content of the samples the phase separation is promoted effortlessly. Several parameters affecting the extraction efficiency and method sensitivity including the concentration of the honey samples, the type and volume of the extraction solvent, the type and quantity of the inorganic salt, extraction time and centrifugation time was systematically investigated. The method was validated in-house according to the Commission Decision 2002/657/EC guidelines. The limit of detection (LOD) of the method lay between 0.02 and 0.04ngmL(-1) (corresponding to 0.08 and 0.16ngg(-1)) which are close to the quality criteria established by European Regulation (EC) 836/2011 concerning the PAHs in foodstuffs. The mean analytical bias (expressed as relative recoveries) in all spiking levels was acceptable being in the range of 54-118% while the relative standard deviation (RSD) was lower than 19%. The proposed method has been satisfactorily applied for the analysis of the selected PAHs residues in various honey samples obtained from Greek region.

  7. High Pressure Behavior of Hydrocarbons. Joule-Thomson Expansion of Gas Condensates Comportement des hydrocarbures à haute pression. Détente de Joule-Thomson de gaz à condensats

    Directory of Open Access Journals (Sweden)

    Kortekaas W. G.

    2006-12-01

    Full Text Available This paper presents calculations of Joule-Thomson inversion effects in high-pressure-high-temperature gas condensates. Isenthalpic expansions were modeled for several gas condensate mixtures reported in literature using the Soave-Redlich-Kwong and the Peng-Robinson equations of state. The calculations confirmed qualitatively the heating of gas condensates at expansion. Although reservoir temperatures are in the region where cooling occurs, i. e. , inside the inversion curve, it was shown that reservoir pressures lie outside this region, and that the temperature will increase until the inversion curve is reached. The calculated temperature increases are not very large. Although exact values depend on fluid composition, reservoir conditions, and pressure drop, typical calculated temperature increases are in the range of 10-30°C for reservoir pressures of 1000 bar. A sensitivity study showed that both reservoir pressure and fluid composition greatly affect the temperature increase. With increasing pressures and increasing amounts of heavy constituents present in gas condensate mixtures, the maximum possible temperature effect will also increase. Unfortunately, due to lack of experimental information, the reliability of the calculated results could not be verified. Cet article présente des calculs de l'effet d'inversion de Joule-Thomson pour des gaz à condensats à haute température et haute pression. La détente isenthalpique a été modélisée pour plusieurs compositions de gaz à condensats trouvées dans la littérature, en utilisant les équations d'état de Soave-Redlich-Kwong et de Peng-Robinson. Ces calculs confirment qualitativement le réchauffement des gaz à condensat lors de la détente. Bien que les températures de gisement se trouvent dans la région où un refroidissement s'observe, c'est-à-dire à l'intérieur de la courbe d'inversion, on a montré que les pressions de gisement correspondent à l'extérieur de cette r

  8. Characterization of hydrocarbon utilizing fungi from hydrocarbon ...

    African Journals Online (AJOL)

    Prof. Ogunji

    hydrocarbon polluted sediments and water .... ecosystem may result in selective increase or decrease in microbial population (Okpokwasili ... been implicated in degradation of hydrocarbons such as crude oil, polyaromatic hydrocarbons and.

  9. Apparatus for hydrocarbon extraction

    Science.gov (United States)

    Bohnert, George W.; Verhulst, Galen G.

    2013-03-19

    Systems and methods for hydrocarbon extraction from hydrocarbon-containing material. Such systems and methods relate to extracting hydrocarbon from hydrocarbon-containing material employing a non-aqueous extractant. Additionally, such systems and methods relate to recovering and reusing non-aqueous extractant employed for extracting hydrocarbon from hydrocarbon-containing material.

  10. 分壁塔响应面法优化分离芳烃混合物研究%Optimization of the Separation Process of Aromatic Hydrocarbons With Dividing Wall Column by Using Response Surface Mehtodology

    Institute of Scientific and Technical Information of China (English)

    高景山; 张英; 薄德臣

    2015-01-01

    以 Hysys 软件对分壁塔分离芳烃混合物进行研究,采用 Box-Behnken 方法对影响分离效果的因素进行了优化,并进行了数学模型的研究,建立了以组分分离纯度为目标值,各工艺参数为因素的二次多项式模型。结果表明:进料温度和液体分配比对整体分离效果的影响显著,气体分配比对苯的分离影响显著,进料温度和液体分配比对甲苯和二甲苯分离交互作用影响显著。分壁塔分离的最优工艺条件为:进料温度122℃、回流比7、液体分配比0.62、气体分配比0.45。%Hysys software was used to simulate the separation process of aromatic hydrocarbons with dividing wall column. Based on the results of single-factor design, Box-Behnken design method was used to optimize the factors to affect the separation effect. A mathematical model was also established to predict the experiment results. The results show that feed temperature and reflux ratio have significant effect on the separation result; distribution ratio of vapor has significant effect on the separation of benzene; feed temperature and distribution ratio of liquid have significant effect on the separation of toluene and exylene.The optimum conditions are as follows: the feed temperature 122℃,the reflux ratio 7,the distribution ratio of liquid 0.65, the distribution ratio of vapor 0.45.

  11. Number-conserving master equation theory for a dilute Bose-Einstein condensate

    CERN Document Server

    Schelle, Alexej; Delande, Dominique; Buchleitner, Andreas

    2010-01-01

    We describe the transition of $N$ weakly interacting atoms into a Bose-Einstein condensate within a number-conserving quantum master equation theory. Based on the separation of time scales for condensate formation and non-condensate thermalization, we derive a master equation for the condensate subsystem in the presence of the non-condensate environment under the inclusion of all two body interaction processes. We numerically monitor the condensate particle number distribution during condensate formation, and derive a condition under which the unique equilibrium steady state of a dilute, weakly interacting Bose-Einstein condensate is given by a Gibbs-Boltzmann thermal state of $N$ non-interacting atoms.

  12. Condensation in insulated homes

    Energy Technology Data Exchange (ETDEWEB)

    Wiley, R A

    1978-05-28

    A research proposal on condensation in insulated homes is presented. Information is provided on: justification for condensation control; previous work and present outlook (good vapor barrier, condensation and retrofit insulation, vapor barrier decreases condensation, brick-veneer walls, condensation in stress-skin panels, air-conditioned buildings, retrofitting for conservation, study on mobile homes, high indoor relative humidity, report on various homes); and procedure (after funding has been secured). Measures are briefly described on opening walls, testing measures, and retrofitting procedures. An extensive bibliography and additional informative citations are included. (MCW)

  13. Condensation of refrigerants on vertical fluted tubes

    Energy Technology Data Exchange (ETDEWEB)

    Combs, S.K.; Mailen, G.S.; Murphy, R.W.

    1978-08-01

    Experiments were run to determine heat transfer performance of single vertical fluted tubes with selected fluids condensing on the outside. Working fluids included six fluorocarbons (Refrigerants 11, 21, 22, 113, 114, and 115) and a hydrocarbon (Refrigerant 600a or isobutane). The nine test tubes were of 2.54-cm (1-in.) nominal outside diameter and 1.2 m (4 ft) in length with from 0 (smooth) to 60 axial flutes. Condensing heat transfer coefficients ranged from 620 to 7900 W/m/sup 2/ . K (110 to 1400 Btu/hr . ft/sup 2/ . /sup 0/F) over the heat flux range of 2000 to 43,000 W/m/sup 2/ (920 to 13,600 Btu/hr . ft/sup 2/). All parameters are based on total condensing surface area. The data show that, for a given heat flux, a fluted tube can increase condensing coefficients up to 6.0 times smooth tube values. Further heat transfer enhancement was achieved by the use of drainage skirts on fluted tubes; these skirts effectively divided the 1.2-m (4-ft) tubes into two, four, and eight equal condensing lengths.

  14. Hydrophobic encapsulation of hydrocarbon gases.

    Science.gov (United States)

    Leontiev, Alexander V; Saleh, Anas W; Rudkevich, Dmitry M

    2007-04-26

    [reaction: see text] Encapsulation data for hydrophobic hydrocarbon gases within a water-soluble hemicarcerand in aqueous solution are reported. It is concluded that hydrophobic interactions serve as the primary driving force for the encapsulation, which can be used for the design of gas-separating polymers with intrinsic inner cavities.

  15. Condensation Energy of a Spacetime Condensate

    CERN Document Server

    de Matos, Clovis Jacinto

    2010-01-01

    Starting from an analogy between the Planck-Einstein scale and the dual length scales in Ginzburg-Landau theory of superconductivity, and assuming that space-time is a condensate of neutral fermionic particles with Planck mass, we derive the baryonic mass of the universe. In that theoretical framework baryonic matter appears to be associated with the condensation energy gained by spacetime in the transition from its normal (symetric) to its (less symetric) superconducting-like phase. It is shown however that the critical transition temperature cannot be the Planck temperature. Thus leaving open the enigma of the microscopic description of spacetime at quantum level.

  16. Total alkyl dibenzothiophenes content tracing the filling pathway of condensate reservoir in the Fushan Depression,South China Sea

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The condensates are generally characterized by high maturity,low concentration of steranes and ter-panes biomarkers and low content of non-hydrocarbon fraction. In this case commonly used steranes,terpanes and carbazoles parameters cannot be effectively applied in the reservoir-filling tracing. The hydrogen bond formed by sulfur atom in the dibenzothiophenes (DBTs) results in molecule adsorption and fractionation during oil migration in reservoir. Like carbazoles,total DBTs content decreases with the increasing of oil migration distance. Therefore,a new parameter——total DBTs content is proposed to be used to trace the oil migration orientation and filling pathway. In present study,total DBTs con-tents of condensates and light oils are obtained by adding internal standard——eight deuterium atoms substituted DBT during Gas Chromatography-Mass Spectrometry analysis of aromatic fraction. Except for a few samples with much lower content of non-hydrocarbon fraction,the total DBTs content shows a fine positive correlation with that of carbazoles. Large errors can be caused in the process of pyrrolic nitrogen compounds separation. The application of this new parameter in the Fushan Depression of Beibu Gulf Basin,South China Sea indicates that this parameter is a reliable one to trace filling pathway in condensate reservoirs. Combined with other DBTs-related parameters,such as 4-/1-methydibenzo-thiophene and 2,4-/1,4-dimethyldibenzothiophene,oil migration orientation and filling pathway of the Fushan Depression was determined. The accumulations of Huachang oil field in the Fushan Depres-sion are mainly migrated and charged from northeast to southeast along the Huachang uplift. It can be predicated that the light oil and condensates in the Huachang oil field should be sourced from the source kitchen at the Bailian Sag. It shows that total DBTs content is an effective parameter to tracing oil migration orientation and filling pathway.

  17. Transferable Tight-Binding Potential for Hydrocarbons

    CERN Document Server

    Wang, Y; Wang, Yang

    1994-01-01

    A transferable tight-binding potential has been constructed for heteroatomic systems containing carbon and hydrogen. The electronic degree of freedom is treated explicitly in this potential using a small set of transferable parameters which has been fitted to small hydrocarbons and radicals. Transferability to other higher hydrocarbons were tested by comparison with ab initio calculations and experimental data. The potential can correctly reproduce changes in the electronic configuration as a function of the local bonding geometry around each carbon atom. This type of potential is well suited for computer simulations of covalently bonded systems in both gas-phase and condensed-phase systems.

  18. Systematic text condensation

    DEFF Research Database (Denmark)

    Malterud, Kirsti

    2012-01-01

    To present background, principles, and procedures for a strategy for qualitative analysis called systematic text condensation and discuss this approach compared with related strategies.......To present background, principles, and procedures for a strategy for qualitative analysis called systematic text condensation and discuss this approach compared with related strategies....

  19. Measure Guideline: Evaporative Condensers

    Energy Technology Data Exchange (ETDEWEB)

    German, A [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States); Dakin, B. [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States); Hoeschele, M. [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States)

    2012-03-01

    This measure guideline on evaporative condensers provides information on properly designing, installing, and maintaining evaporative condenser systems as well as understanding the benefits, costs, and tradeoffs. This is a prescriptive approach that outlines selection criteria, design and installation procedures, and operation and maintenance best practices.

  20. A preliminary evaluation model for reservoir hydrocarbon-generating potential established based on dissolved hydrocarbons in oilfield water

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A large number of oilfield water samples were analyzed in this work. Research on the relationship between the concentrations and distribution of dissolved hydrocarbons sug gested that the contents and composition of dissolved hydrocarbons varied with the hydrocar bon-generating potential of reservoirs. The concentrations of dissolved hydrocarbons were low in dry layers, water layers and gas-water layers, but high in gas reservoirs and oil reservoirs, especially in gas reservoirs with condensed oil. Series of carbon-number alkanes were usually absent in oilfield water from dry layers, water layers and gas-water layers but abundant in oil field water from oil-water reservoirs, gas reservoirs and oil reservoirs, whose carbon numbers varied most widely in oil reservoirs and least in gas reservoirs. A preliminary evaluation model for reservoir hydrocarbon-generating potential was established based on the characteristics of dissolved hydrocarbons in oilfield water to assist hydrocarbon exploration.

  1. The hydrocarbon sphere

    Energy Technology Data Exchange (ETDEWEB)

    Mandev, P.

    1984-01-01

    The hydrocarbon sphere is understood to be the area in which hydrocarbon compounds are available. It is believed that the lower boundary on the hydrocarbon sphere is most probably located at a depth where the predominant temperatures aid in the destruction of hydrocarbons (300 to 400 degrees centigrade). The upper limit on the hydrocarbon sphere obviously occurs at the earth's surface, where hydrocarbons oxidize to H20 and CO2. Within these ranges, the occurrence of the hydrocarbon sphere may vary from the first few hundred meters to 15 kilometers or more. The hydrocarbon sphere is divided into the external (mantle) sphere in which the primary gas, oil and solid hydrocarbon fields are located, and the internal (metamorphic) sphere containing primarily noncommercial accumulations of hydrocarbon gases and solid carbon containing compounds (anthraxilite, shungite, graphite, etc.) based on the nature and scale of hydrocarbon compound concentrations (natural gas, oil, maltha, asphalt, asphaltite, etc.).

  2. Removal of Mercury in Liquid Hydrocarbons using Zeolites Modified with Chitosan and Magnetic Iron Oxide Nanoparticles

    Science.gov (United States)

    Kusrini, E.; Susanto, B. H.; Nasution, D. A.; Jonathan, R.; Khairul, W. M.

    2017-07-01

    Clinoptilolite zeolites were chemically modified with chitosan (Chit) and magnetic iron oxide nanoparticles (Fe3O4NPs) were synthesized for removal of mercury from liquid condensate hydrocarbon. The mercury content was in liquid hydrocarbon which was measured by Lumex mercury analyzer. The performance of sorbents based on zeolites modified chitosan and magnetic nanoparticles were examined on the real liquid condensate hydrocarbon. Removal of mercury using a prestine clinoptilolite zeolites, and zeolites modified chitosan (zeolites-Chit) were ∼4.5, and ∼35%, respectively. The effects of magnetic nanoparticles in zeolites-Chit sorbents were significant to reduce the mercury content in liquid condensate hydrocarbon which were from ∼63 to ∼66%. Increasing the mass ratio of Fe3O4 that influenced to the BET surface area of natural zeolites. Zeolites-Chit-Fe3O4NPs as an efficient sorbents are potential ideal to remove mercury in hydrocarbon for practical applications.

  3. Design and analysis of a 5-MW vertical-fluted-tube condenser for geothermal applications

    Energy Technology Data Exchange (ETDEWEB)

    Llewellyn, G.H.

    1982-03-01

    The design and analysis of an industtial-sized vertical-fluted-tube condenser. The condenser is used to condense superheated isobutane vapor discharged from a power turbine in a geothermal test facility operated for the US Department of Energy. The 5-MW condenser has 1150 coolant tubes in a four-pass configuration with a total heat transfer area of 725 m/sup 2/ (7800 ft/sup 2/). The unit is being tested at the Geothermal Components Test Facility in the Imperial Valley of East Mesa, California. The condenser design is based on previous experimental research work done at the Oak Ridge National Laboratory on condensing refrigerants on a wide variety of single vertical tubes. Condensing film coefficients obtained on the high-performance vertical fluted tubes in condensing refrigerants are as much as seven times greater than those obtained with vertical smooth tubes that have the same diameter and length. The overall heat transfer performance expected from the fluted tube condenser is four to five times the heat transfer obtained from the identical units employing smooth tubes. Fluted tube condensers also have other direct applications in the Ocean Thermal Energy Conversion (OTEC) program in condensing ammonia, in the petroleum industry in condensing light hydrocarbons, and in the air conditioning and refrigeration industry in condensing fluorocarbon vapors.

  4. Sedimentary condensation and authigenesis

    Science.gov (United States)

    Föllmi, Karl

    2016-04-01

    Most marine authigenic minerals form in sediments, which are subjected to condensation. Condensation processes lead to the formation of well individualized, extremely thin ( 100ky), and which experienced authigenesis and the precipitation of glaucony, verdine, phosphate, iron and manganese oxyhydroxides, iron sulfide, carbonate and/or silica. They usually show complex internal stratigraphies, which result from an interplay of sediment accumulation, halts in sedimentation, sediment winnowing, erosion, reworking and bypass. They may include amalgamated faunas of different origin and age. Hardgrounds may be part of condensed beds and may embody strongly condensed beds by themselves. Sedimentary condensation is the result of a hydrodynamically active depositional regime, in which sediment accumulation, winnowing, erosion, reworking and bypass are processes, which alternate as a function of changes in the location and intensity of currents, and/or as the result of episodic high-energy events engendered by storms and gravity flow. Sedimentary condensation has been and still is a widespread phenomenon in past and present-day oceans. The present-day distribution of glaucony and verdine-rich sediments on shelves and upper slopes, phosphate-rich sediments and phosphorite on outer shelves and upper slopes, ferromanganese crusts on slopes, seamounts and submarine plateaus, and ferromanganese nodules on abyssal seafloors is a good indication of the importance of condensation processes today. In the past, we may add the occurrence of oolitic ironstone, carbonate hardgrounds, and eventually also silica layers in banded iron formations as indicators of the importance of condensation processes. Besides their economic value, condensed sediments are useful both as a carrier of geochemical proxies of paleoceanographic and paleoenvironmental change, as well as the product of episodes of paleoceanographic and paleoenvironmental change themselves.

  5. Physics of condensed matter

    CERN Document Server

    Misra, Prasanta K

    2012-01-01

    Physics of Condensed Matter is designed for a two-semester graduate course on condensed matter physics for students in physics and materials science. While the book offers fundamental ideas and topic areas of condensed matter physics, it also includes many recent topics of interest on which graduate students may choose to do further research. The text can also be used as a one-semester course for advanced undergraduate majors in physics, materials science, solid state chemistry, and electrical engineering, because it offers a breadth of topics applicable to these majors. The book be

  6. Tunneling of Bose-Einstein condensate and interference effect in a harmonic trap with a Gaussian energy barrier

    Institute of Scientific and Technical Information of China (English)

    Hua Wei; Li Bin; Liu Xue-Shen

    2011-01-01

    The tunneling effect of Bose-Einstein condensate (BEC) in a harmonic trap with a Gaussian energy barrier is studied in this paper. The initial condensate evolves into two separate moving condensates after the tunneling time under certain conditions. The interference pattern between the two moving condensates is given as a comparison and as a further demonstration of the existence of the global phase.

  7. Formation of PAHs and Carbonaceous Solids in Gas-Phase Condensation Experiments

    CERN Document Server

    Jäger, C; Jansa, I Llamas; Henning, T; Huisken, F

    2009-01-01

    Carbonaceous grains represent a major component of cosmic dust. In order to understand their formation pathways, they have been prepared in the laboratory by gas-phase condensation reactions such as laser pyrolysis and laser ablation. Our studies demonstrate that the temperature in the condensation zone determines the formation pathway of carbonaceous particles. At temperatures lower than 1700 K, the condensation by-products are mainly polycyclic aromatic hydrocarbons (PAHs), that are also the precursors or building blocks for the condensing soot grains. The low-temperature condensates contain PAH mixtures that are mainly composed of volatile 3-5 ring systems. At condensation temperatures higher than 3500 K, fullerene-like carbon grains and fullerene compounds are formed. Fullerene fragments or complete fullerenes equip the nucleating particles. Fullerenes can be identified as soluble components. Consequently, condensation products in cool and hot astrophysical environments such as cool and hot AGB stars or W...

  8. Column chromatographic separation of polycyclic aromatic hydrocarbons in coal tar pitch and its GC/MS analysis%煤焦油沥青中多环芳烃的柱层析分离及其GC—MS分析

    Institute of Scientific and Technical Information of China (English)

    罗道成; 刘俊峰

    2011-01-01

    Coal tar pitch was extracted with isometric carbon disulfide - acetone mixed solvent under ultrasonic radiation and room temperature. Polycyclic aromatic hydrocarbons (PAHs) in coal tar pitch were extracted by mixed solvent. The extracts were absorbed by silica gel. The silica gel was eluted with petroleum ether, PAHs in coal tar pitch were separated by using column chromatographic method. A white crystal, a white powder and a colorless crystal (marked as M1, M2, M3 respectively) appeared in three eluents, and M1 ,M2 and M3 were analyzed with GC -MS respectively. The results showed that M1 was mainly composed of 3 - ring PAHs and heterocyclic compounds, M2 was mainly composed of 4 - ring PAHs and heterocyclic compounds, and Ms was composed of 4 - ring or 5 - ring PAHs.%室温下用等体积的二硫化碳-丙酮混合溶剂对煤焦油沥青进行超声辐射萃取,煤焦油沥青中多环芳烃(PAHs)被混合溶剂萃取,用硅胶吸附萃取物,以石油醚为洗脱液洗脱硅胶,采用柱层析法对煤焦油沥青中多环芳烃进行了分离.在定量收取的洗脱液中分别析出了白色晶体、白色粉状物质和无色晶体(分别标记为M1,M2,M3),用气相色谱-质谱联用仪(GC/MS)分别对M1,M2,M3进行了分析,结果表明,M1中主要为3个环的多环芳烃和杂环化合物,M2中主要为4个环的多环芳烃和杂环化合物,M3中全部为4~5个环的多环芳烃.

  9. Selection of ionic liquids for the extraction of aromatic hydrocarbons from aromatic/aliphatic mixtures

    NARCIS (Netherlands)

    Meindersma, G. Wytze; Podt, Anita (J.G.); Haan, de André B.

    2005-01-01

    The separation of aromatic hydrocarbons (benzene, toluene, ethyl benzene and xylenes) from C4 to C10 aliphatic hydrocarbon mixtures is challenging since these hydrocarbons have boiling points in a close range and several combinations form azeotropes. In this work, we investigated the separation of t

  10. Measure Guideline: Evaporative Condensers

    Energy Technology Data Exchange (ETDEWEB)

    German, A.; Dakin, B.; Hoeschele, M.

    2012-03-01

    The purpose of this measure guideline on evaporative condensers is to provide information on a cost-effective solution for energy and demand savings in homes with cooling loads. This is a prescriptive approach that outlines selection criteria, design and installation procedures, and operation and maintenance best practices. This document has been prepared to provide a process for properly designing, installing, and maintaining evaporative condenser systems as well as understanding the benefits, costs, and tradeoffs.

  11. Modeling the Phase Composition of Gas Condensate in Pipelines

    Science.gov (United States)

    Dudin, S. M.; Zemenkov, Yu D.; Shabarov, A. B.

    2016-10-01

    Gas condensate fields demonstrate a number of thermodynamic characteristics to be considered when they are developed, as well as when gas condensate is transported and processed. A complicated phase behavior of the gas condensate system, as well as the dependence of the extracted raw materials on the phase state of the deposit other conditions being equal, is a key aspect. Therefore, when designing gas condensate lines the crucial task is to select the most appropriate methods of calculating thermophysical properties and phase equilibrium of the transported gas condensate. The paper describes a physical-mathematical model of a gas-liquid flow in the gas condensate line. It was developed based on balance equations of conservation of mass, impulse and energy of the transported medium within the framework of a quasi-1D approach. Constitutive relationships are given separately, and practical recommendations on how to apply the research results are provided as well.

  12. Nonresonant optical control of a spinor polariton condensate

    Science.gov (United States)

    Askitopoulos, A.; Kalinin, K.; Liew, T. C. H.; Cilibrizzi, P.; Hatzopoulos, Z.; Savvidis, P. G.; Berloff, N. G.; Lagoudakis, P. G.

    2016-05-01

    We investigate the spin dynamics of polariton condensates spatially separated from and effectively confined by the pumping exciton reservoir. We obtain a strong correlation between the ellipticity of the nonresonant optical pump and the degree of circular polarization (DCP) of the condensate at the onset of condensation. With increasing excitation density we observe a reversal of the DCP. The spin dynamics of the trapped condensate are described within the framework of the spinor complex Ginzburg-Landau equations in the Josephson regime, where the dynamics of the system are reduced to a current-driven Josephson junction. We show that the observed spin reversal is due to the interplay between an internal Josephson coupling effect and the detuning of the two projections of the spinor condensate via transition from a synchronized to a desynchronized regime. These results suggest that spinor polariton condensates can be controlled by tuning the nonresonant excitation density offering applications in electrically pumped polariton spin switches.

  13. Raman characteristics of hydrocarbon and hydrocarbon inclusions

    Institute of Scientific and Technical Information of China (English)

    ZHANG Nai; TIAN ZuoJi; LENG YingYing; WANG HuiTong; SONG FuQing; MENG JianHua

    2007-01-01

    The Raman spectrograms of hydrocarbon standard samples show that: (1) the Raman spectrogram of normal paraffin has very strong peaks of methyl and methylene (from 2700 cm-1 to 2970 cm-1); (2)branch methyl has the particular peak of 748 cm-1±; (3) six cyclic has the particular peak of 804 cm-1±; (4)phenyl has two particular peaks of 988 cm-1± and 3058 cm-1± and the 988 cm-1± peak is stronger than the 3058 cm-1± peak; and (5) hexene has three alkenyl spectrum peaks of 1294 cm-1±, 1635 cm-1± and 2996 cm-1±, with the 1635 cm-1± peak being the strongest, showing that the number of carbon in hydrocarbon does not affect its Raman spectrogram, and the hydrocarbon molecular structure and base groups affect its Raman spectrogram, the same hydrocarbons (such as normal paraffin) have the same Raman spectrogram; the types (such as CH4, C2H6, C3H8) and the content of hydrocarbon in oil inclusions are not estimated by their characteristic Raman peaks. According to the Raman spectrograms of hydrocarbon compositions, the Raman spectrogram of hydrocarbon inclusion can be divided into five types: saturated hydrocarbon Raman spectrogram, fluoresce Raman spectrogram, saturated hydrocarbon bitumen Raman spectrogram, bitumen Raman spectrogram, and ethane Raman spectrogram.And according to the characteristics of Raman spectrogram, hydrocarbon inclusions can be divided into five types: saturated hydrocarbon inclusion, less saturated hydrocarbon (oil or gas) inclusion,saturated hydrocarbon bitumen inclusion, bitumen inclusion, and methane water inclusion.

  14. Raman characteristics of hydrocarbon and hydrocarbon inclusions

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The Raman spectrograms of hydrocarbon standard samples show that: (1) the Raman spectrogram of normal paraffin has very strong peaks of methyl and methylene (from 2700 cm-1 to 2970 cm-1); (2) branch methyl has the particular peak of 748 cm-1±; (3) six cyclic has the particular peak of 804 cm-1±; (4) phenyl has two particular peaks of 988 cm-1± and 3058 cm-1± and the 988 cm-1± peak is stronger than the 3058 cm-1± peak; and (5) hexene has three alkenyl spectrum peaks of 1294 cm-1±, 1635 cm-1± and 2996 cm-1±, with the 1635 cm-1± peak being the strongest, showing that the number of carbon in hy-drocarbon does not affect its Raman spectrogram, and the hydrocarbon molecular structure and base groups affect its Raman spectrogram, the same hydrocarbons (such as normal paraffin) have the same Raman spectrogram; the types (such as CH4, C2H6, C3H8) and the content of hydrocarbon in oil inclu-sions are not estimated by their characteristic Raman peaks. According to the Raman spectrograms of hydrocarbon compositions, the Raman spectrogram of hydrocarbon inclusion can be divided into five types: saturated hydrocarbon Raman spectrogram, fluoresce Raman spectrogram, saturated hydro-carbon bitumen Raman spectrogram, bitumen Raman spectrogram, and ethane Raman spectrogram. And according to the characteristics of Raman spectrogram, hydrocarbon inclusions can be divided into five types: saturated hydrocarbon inclusion, less saturated hydrocarbon (oil or gas) inclusion, saturated hydrocarbon bitumen inclusion, bitumen inclusion, and methane water inclusion.

  15. Compounds and methods for the production of long chain hydrocarbons from biological sources

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, John Cameron; Silks, Louis A; Sutton, Andrew D; Wu, Ruilian; Schlaf, Marcel; Waldie, Fraser; West, Ryan; Collias, Dimitris Ioannis

    2016-08-23

    The present invention is directed to the preparation of oxygenated, unsaturated hydrocarbon compounds, such as derivatives of furfural or hydroxymethyl furfural produced by aldol condensation with a ketone or a ketoester, as well as methods of deoxidatively reducing those compounds with hydrogen under acidic conditions to provide saturated hydrocarbons useful as fuels.

  16. Compounds and methods for the production of long chain hydrocarbons from biological sources

    Science.gov (United States)

    Gordon, John Cameron; Silks, Louis A; Sutton, Andrew D; Wu, Ruilian; Schlaf, Marcel; Waldie, Fraser; West, Ryan; Collias, Dimitris Ioannis

    2016-08-23

    The present invention is directed to the preparation of oxygenated, unsaturated hydrocarbon compounds, such as derivatives of furfural or hydroxymethyl furfural produced by aldol condensation with a ketone or a ketoester, as well as methods of deoxidatively reducing those compounds with hydrogen under acidic conditions to provide saturated hydrocarbons useful as fuels.

  17. Dropwise Condensation of Low Surface Tension Fluids on Omniphobic Surfaces

    Science.gov (United States)

    Rykaczewski, Konrad; Paxson, Adam T.; Staymates, Matthew; Walker, Marlon L.; Sun, Xiaoda; Anand, Sushant; Srinivasan, Siddarth; McKinley, Gareth H.; Chinn, Jeff; Scott, John Henry J.; Varanasi, Kripa K.

    2014-03-01

    Compared to the significant body of work devoted to surface engineering for promoting dropwise condensation heat transfer of steam, much less attention has been dedicated to fluids with lower interfacial tension. A vast array of low-surface tension fluids such as hydrocarbons, cryogens, and fluorinated refrigerants are used in a number of industrial applications, and the development of passive means for increasing their condensation heat transfer coefficients has potential for significant efficiency enhancements. Here we investigate condensation behavior of a variety of liquids with surface tensions in the range of 12 to 28 mN/m on three types of omniphobic surfaces: smooth oleophobic, re-entrant superomniphobic, and lubricant-impregnated surfaces. We demonstrate that although smooth oleophobic and lubricant-impregnated surfaces can promote dropwise condensation of the majority of these fluids, re-entrant omniphobic surfaces became flooded and reverted to filmwise condensation. We also demonstrate that on the lubricant-impregnated surfaces, the choice of lubricant and underlying surface texture play a crucial role in stabilizing the lubricant and reducing pinning of the condensate. With properly engineered surfaces to promote dropwise condensation of low-surface tension fluids, we demonstrate a four to eight-fold improvement in the heat transfer coefficient.

  18. Using supercritical fluids to refine hydrocarbons

    Science.gov (United States)

    Yarbro, Stephen Lee

    2015-06-09

    A system and method for reactively refining hydrocarbons, such as heavy oils with API gravities of less than 20 degrees and bitumen-like hydrocarbons with viscosities greater than 1000 cp at standard temperature and pressure, using a selected fluid at supercritical conditions. A reaction portion of the system and method delivers lightweight, volatile hydrocarbons to an associated contacting unit which operates in mixed subcritical/supercritical or supercritical modes. Using thermal diffusion, multiphase contact, or a momentum generating pressure gradient, the contacting unit separates the reaction products into portions that are viable for use or sale without further conventional refining and hydro-processing techniques.

  19. Experimental and theoretical study of reflux condensation

    Energy Technology Data Exchange (ETDEWEB)

    Bakke, Knut

    1997-12-31

    This thesis studies the separation of gas mixtures in a reflux condenser. also called a dephlegmator. Reflux condensation is separation of a gas mixture, in reflux flow with condensing liquid, under continuous heat removal. A numerical model of a dephlegmator for binary mixtures was developed. The model may readily be extended to multi-component mixtures, as the solution method is based on a matrix solver. Separation of a binary mixture in a reflux condenser test rig is demonstrated. The test facility contains a single-tube test section that was designed and built as part of the project. Test mixtures of propane and n-butane were used, and a total of 15 experiments are reported. Limited degree of separation was achieved due to limited heat transfer area and narrow boiling point range of the test mixture. The numerical model reproduces the experimental data within reasonable accuracy. Deviation between calculated and measured properties is less than 6% of the measured temperature and less than 5% of the measured flow rate. The model is based on mechanistic models of physical processes and is not calibrated or tuned to fit the experimental data. The numerical model is applied to a number of separation processes. These case studies show that the required heat transfer area increases rapidly with increments in top product composition (light component). Flooding limits the amount of reflux liquid. The dephlegmator is suitable for separation of feed mixtures that are rich in light components. The gliding temperature in the dephlegmation process enables utilization of top product as refrigerant, with subsequent energy saving as a result. 61 refs., 50 figs., 34 tabs.

  20. Olefin separation membrane and process

    Science.gov (United States)

    Pinnau, Ingo; Toy, Lora G.; Casillas, Carlos

    1997-01-01

    A membrane and process for separating unsaturated hydrocarbons from fluid mixtures. The membrane and process differ from previously known membranes and processes, in that the feed and permeate streams can both be dry, the membrane need not be water or solvent swollen, and the membrane is characterized by a selectivity for an unsaturated hydrocarbon over a saturated hydrocarbon having the same number of carbon atoms of at least about 20, and a pressure-normalized flux of said unsaturated hydrocarbon of at least about 5.times.10.sup.-6 cm.sup.3 (STP)/cm.sup.2 .multidot.s.multidot.cmHg, said flux and selectivity being measured with a gas mixture containing said unsaturated and saturated hydrocarbons, and in a substantially dry environment.

  1. Synthesis of Bisphenols Carrying Long Hydrocarbon Side Chains

    Institute of Scientific and Technical Information of China (English)

    XU Jing-zhe; JIANG Nan-zhe; ZHANG Jian; JIANG Ri-shan

    2005-01-01

    Bisphenols containing long aliphatic hydrocarbon side chains were synthesized by the condensation of phenol with aldehyde or ketone in the presence of heteropolyacid. Their structures were characterized by IR, 1H NMR, 13C NMR and element analysis. The experiment results show that when heteropolyacid was used as a catalyst, these bisphenols were obtained in high selectivity and high yields.

  2. CONDENSATION OF WATER VAPOR IN A VERTICAL TUBE CONDENSER

    Directory of Open Access Journals (Sweden)

    Jan Havlík

    2015-10-01

    Full Text Available This paper presents an analysis of heat transfer in the process of condensation of water vapor in a vertical shell-and-tube condenser. We analyze the use of the Nusselt model for calculating the condensation heat transfer coefficient (HTC inside a vertical tube and the Kern, Bell-Delaware and Stream-flow analysis methods for calculating the shell-side HTC from tubes to cooling water. These methods are experimentally verified for a specific condenser of waste process vapor containing air. The operating conditions of the condenser may be different from the assumptions adopted in the basic Nusselt theory. Modifications to the Nusselt condensation model are theoretically analyzed.

  3. Characteristics of carbon and hydrogen isotopic compositions of light hydrocarbons

    Institute of Scientific and Technical Information of China (English)

    沈平

    1995-01-01

    Light hydrocarbons named in the present paper refer to the natural gas-associated light oil and condensate 46 light oil and condensate samples from 11 oil-bearing basins of China were collected and their carbon and hydrogen isotopic compositions were analysed in terms of their total hydrocarbons, saturated hydrocarbons and a part of aromatic fractions, and gas-source materials and their sedimentary environments were discussed based on the above-mentioned data and the geological background of each area. From the view of carbon and hydrogen isotopic composition of total hydrocarbons and saturated hydrocarbons, it is revealed that the condensate related to coal-bearing strata is enriched in 13C and D while that related to the source material of type I-II is enriched in 12C. In general, the isotopic composition of carbon is mainly attributed to the inheriting effect of their source materials, whereas that of hydrogen principally reflects the correlationship between hydrogen isotopes and the sedimentary envi

  4. Catalytic conversion of alcohols to hydrocarbons with low benzene content

    Energy Technology Data Exchange (ETDEWEB)

    Narula, Chaitanya K.; Davison, Brian H.; Keller, Martin

    2016-03-08

    A method for converting an alcohol to a hydrocarbon fraction having a lowered benzene content, the method comprising: converting said alcohol to a hydrocarbon fraction by contacting said alcohol, under conditions suitable for converting said alcohol to said hydrocarbon fraction, with a metal-loaded zeolite catalyst catalytically active for converting said alcohol to said hydrocarbon fraction, and contacting said hydrocarbon fraction with a benzene alkylation catalyst, under conditions suitable for alkylating benzene, to form alkylated benzene product in said hydrocarbon fraction. Also described is a catalyst composition useful in the method, comprising a mixture of (i) a metal-loaded zeolite catalyst catalytically active for converting said alcohol to said hydrocarbon, and (ii) a benzene alkylation catalyst, in which (i) and (ii) may be in a mixed or separated state. A reactor for housing the catalyst and conducting the reaction is also described.

  5. Catalytic conversion of alcohols to hydrocarbons with low benzene content

    Energy Technology Data Exchange (ETDEWEB)

    Narula, Chaitanya K.; Davison, Brian H.; Keller, Martin

    2016-09-06

    A method for converting an alcohol to a hydrocarbon fraction having a lowered benzene content, the method comprising: converting said alcohol to a hydrocarbon fraction by contacting said alcohol, under conditions suitable for converting said alcohol to said hydrocarbon fraction, with a metal-loaded zeolite catalyst catalytically active for converting said alcohol to said hydrocarbon fraction, and contacting said hydrocarbon fraction with a benzene alkylation catalyst, under conditions suitable for alkylating benzene, to form alkylated benzene product in said hydrocarbon fraction. Also described is a catalyst composition useful in the method, comprising a mixture of (i) a metal-loaded zeolite catalyst catalytically active for converting said alcohol to said hydrocarbon, and (ii) a benzene alkylation catalyst, in which (i) and (ii) may be in a mixed or separated state. A reactor for housing the catalyst and conducting the reaction is also described.

  6. Studies and modelling in the formation, growth, and separation behaviour of spheric and fibrous aerosols in the sub and super-micron range in technical processes by heterogeneous nucleation, heterogeneous multicomponent condensation; Untersuchungen und Modellbildung zum Bildungs-, Wachstums- und Abscheideverhalten von sphaerischen und faserfoermigen Aerosolen im sub- und supermikronen Groessenbereich in verfahrentechnischen Prozessen durch heterogene Nukleation, heterogene multikomponenten Kondensation

    Energy Technology Data Exchange (ETDEWEB)

    Haep, S.; Schmidt, K.G. [Duisburg Univ. (Gesamthochschule) (Germany). Fachgebiet Verfahrenstechnik/Umwelttechnik]|[Institut fuer Umwelttechnologie und Umweltanalytik e.V., Duisburg (Germany)

    1998-12-31

    This work`s scientific interest focuses on the study of the complex interactions of the phases in condensation processes in aerosol systems, both as a basis for `primary` separation techniques for particles of a given geometry, such as, for instance, asbestos fibres, and for the optimization of absorption processes, where particle elimination is a `secondary` effect. (orig.) [Deutsch] Im Mittelpunkt des wiss. Interesses dieser Arbeit steht daher die Untersuchung des komplexen Zusammenwirkens der Phasen bei Kondensationsvorgaengen in Aerosolsystemen sowohl als Grundlage fuer ein `primaeres` Abscheideverfahren fuer Partikeln beliebiger Geometrie, wie z.B. Asbestfasern, als auch fuer die Optimierung von Absorptionsprozessen, wo die Partikelabscheidung als `sekundaerer` Effekt nicht vorrangig im Mittelpunkt des Verfahrens steht. (orig.)

  7. Simple Simulations of DNA Condensation

    Energy Technology Data Exchange (ETDEWEB)

    STEVENS,MARK J.

    2000-07-12

    Molecular dynamics simulations of a simple, bead-spring model of semiflexible polyelectrolytes such as DNA are performed. All charges are explicitly treated. Starting from extended, noncondensed conformations, condensed structures form in the simulations with tetravalent or trivalent counterions. No condensates form or are stable for divalent counterions. The mechanism by which condensates form is described. Briefly, condensation occurs because electrostatic interactions dominate entropy, and the favored Coulombic structure is a charge ordered state. Condensation is a generic phenomena and occurs for a variety of polyelectrolyte parameters. Toroids and rods are the condensate structures. Toroids form preferentially when the molecular stiffness is sufficiently strong.

  8. Preventing freezing of condensate inside tubes of air cooled condenser

    Energy Technology Data Exchange (ETDEWEB)

    Joo, Jeong A; Hwang, In Hwan; Lee, Dong Hwan [Chonbuk Nat' l Univ., Jeonju (Korea, Republic of); Cho, Young Il [Drexel Univ., Philadelphia (United States)

    2012-08-15

    An air cooled condenser is a device that is used for converting steam into condensate by using ambient air. The air cooled condenser is prone to suffer from a serious explosion when the condensate inside the tubes of a heat exchanger is frozen; in particular, tubes can break during winter. This is primarily due to the structural problem of the tube outlet of an existing conventional air cooled condenser system, which causes the backflow of residual steam and noncondensable gases. To solve the backflow problem in such condensers, such a system was simulated and a new system was designed and evaluated in this study. The experimental results using the simulated condenser showed the occurrence of freezing because of the backflow inside the tube. On the other hand, no backflow and freezing occurred in the advanced new condenser, and efficient heat exchange occurred.

  9. Soft condensed matter

    NARCIS (Netherlands)

    Frenkel, D.

    2002-01-01

    These lectures illustrate some of the concepts of soft-condensed matter physics, taking examples from colloid physics. Many of the theoretical concepts will be illustrated with the results of computer simulations. After a brief introduction describing interactions between colloids, the paper focuses

  10. Condensed landscape experience

    DEFF Research Database (Denmark)

    Earon, Ofri

    2011-01-01

    . This paper addresses the question of whether the sensation of landscape can be condensed in function or to the size of an urban building. It also discusses the benefits and potentials of the amalgamate, by underlining the unique qualities of such a hybrid. In an attempt to define the experience of landscape...

  11. Domains of Disoriented Chiral Condensate

    CERN Document Server

    Amado, R D; Lu, Yang

    1996-01-01

    The probability distribution of neutral pion fraction from independent domains of disoriented chiral condensate is characterized. The signal for the condensate is clear for a small number of domains but is greatly reduced for more than three.

  12. Determination of the aromatic hydrocarbon to total hydrocarbon ratio of mineral oil in commercial lubricants.

    Science.gov (United States)

    Uematsu, Yoko; Suzuki, Kumi; Ogimoto, Mami

    2016-01-01

    A method was developed to determine the aromatic hydrocarbon to total hydrocarbon ratio of mineral oil in commercial lubricants; a survey was also conducted of commercial lubricants. Hydrocarbons in lubricants were separated from the matrix components of lubricants using a silica gel solid phase extraction (SPE) column. Normal-phase liquid chromatography (NPLC) coupled with an evaporative light-scattering detector (ELSD) was used to determine the aromatic hydrocarbon to total hydrocarbon ratio. Size exclusion chromatography (SEC) coupled with a diode array detector (DAD) and a refractive index detector (RID) was used to estimate carbon numbers and the presence of aromatic hydrocarbons, which supplemented the results obtained by NPLC/ELSD. Aromatic hydrocarbons were not detected in 12 lubricants specified for use for incidental food contact, but were detected in 13 out of 22 lubricants non-specified for incidental food contact at a ratio up to 18%. They were also detected in 10 out of 12 lubricants collected at food factories at a ratio up to 13%. The centre carbon numbers of hydrocarbons in commercial lubricants were estimated to be between C16 and C50.

  13. Kaon condensation and multi-strange matter

    Science.gov (United States)

    Gazda, D.; Friedman, E.; Gal, A.; Mareš, J.

    2010-04-01

    We report on dynamical calculations of multi- K¯ hypernuclei, which were performed by adding K¯ mesons to particle-stable configurations of nucleons, Λ and Ξ hyperons. The K¯ separation energy as well as the baryonic densities saturate with the number of antikaons. We demonstrate that the saturation is a robust feature of multi- K¯ hypernuclei. Because the K¯ separation energy B does not exceed 200 MeV, we conclude that kaon condensation is unlikely to occur in finite strong-interaction self-bound {N,Λ,Ξ} strange hadronic systems.

  14. Photon condensation: A new paradigm for Bose-Einstein condensation

    Science.gov (United States)

    Rajan, Renju; Ramesh Babu, P.; Senthilnathan, K.

    2016-10-01

    Bose-Einstein condensation is a state of matter known to be responsible for peculiar properties exhibited by superfluid Helium-4 and superconductors. Bose-Einstein condensate (BEC) in its pure form is realizable with alkali atoms under ultra-cold temperatures. In this paper, we review the experimental scheme that demonstrates the atomic Bose-Einstein condensate. We also elaborate on the theoretical framework for atomic Bose-Einstein condensation, which includes statistical mechanics and the Gross-Pitaevskii equation. As an extension, we discuss Bose-Einstein condensation of photons realized in a fluorescent dye filled optical microcavity. We analyze this phenomenon based on the generalized Planck's law in statistical mechanics. Further, a comparison is made between photon condensate and laser. We describe how photon condensate may be a possible alternative for lasers since it does not require an energy consuming population inversion process.

  15. Optimized wood/pellet heater with flue gas condensation; Optimerad ved/pelletspanna med roekgaskondensering

    Energy Technology Data Exchange (ETDEWEB)

    Fredriksson, Christian; Ramstroem, Erik; Berge, Niklas [TPS Termiska Processer AB, Nykoeping (Sweden)

    2002-09-01

    To increase the efficiency of small-scale combustion equipment it is possible to cool the flue gas and condense the water vapor in the flue gas in a flue gas condenser. This also makes it possible to reduce the emissions of particles and unburnt hydrocarbon if the condenser is designed in a suitable way. This work concerns flue gas condensation with respect to the design of the condenser, the handling of the condensate and the integration of the flue gas condenser in a heating system from a technical and an economical point of view. The results from laboratory experiments shows that a flue gas condenser, designed as a plate heat exchanger, connected to a wood pellet fired heater reduces the emissions of both particles and unburnt hydrocarbons. A reduction of 10 to 77% of the particle content in the gas was achieved, the content of hydrocarbons (BTX) was reduced by 50 to 91 %. It was not possible to see any effect on the emissions by changing the design of the condenser, due to the relatively large scatter in the determined particle content in the gas. When it comes to cooling capacity the trends were however more clear; the cooling capacity was strongly dependent on the design of the condenser. It was possible to increase the cooling capacity of the condenser with 124% by changing the condenser design from a reference case with conventional design of the condenser with flat walls, to a design with a corrugated shape of the wall. For a typical domestic wood stove heater of 30 kW this means that the cooling capacity in a condenser under similar conditions increases from 3.3 to 7.4 kW. The addition of water in a spray in the gas upstream of the condenser had only a limited effect on the cooling capacity. The condensate from the condenser was analyzed with respect to the components that currently are regulated for disposal to the district sewer system. The analyses showed that the condensate most likely could be disposed to the sewer system directly without any

  16. Chaos of chiral condensate

    CERN Document Server

    Hashimoto, Koji; Yoshida, Kentaroh

    2016-01-01

    Assigning a chaos index for vacua of generic quantum field theories is a challenging problem. We find chaotic behavior of chiral condensates of a quantum gauge theory at strong coupling limit, by using the AdS/CFT correspondence. We evaluate the time evolution of homogeneous quark condensates and in an N=2 supersymmetric QCD with the SU(N_c) gauge group at large N_c and at large 't Hooft coupling lambda. At an equivalent classical gravity picture, a Lyapunov exponent is readily defined. We show that the condensates exhibit chaotic behavior for energy density E > (6x10^2) (N_c/lambda^2) (m_q)^4 where m_q is the quark mass. The energy region of the chaotic vacua of the N=2 supersymmetric QCD increases for smaller N_c or larger lambda. The Lyapunov exponent is calculated as a function of the theory (N_c,lambda,E), showing that the N=2 supersymmetric QCD is more chaotic for smaller N_c.

  17. Asymmetric condensed dark matter

    CERN Document Server

    Aguirre, Anthony

    2015-01-01

    We explore the viability of a boson dark matter candidate with an asymmetry between the number densities of particles and antiparticles. A simple thermal field theory analysis confirms that, under certain general conditions, this component would develop a Bose-Einstein condensate in the early universe that, for appropriate model parameters, could survive the ensuing cosmological evolution until now. The condensation of a dark matter component in equilibrium with the thermal plasma is a relativistic process, hence the amount of matter dictated by the charge asymmetry is complemented by a hot relic density frozen out at the time of decoupling. Contrary to the case of ordinary WIMPs, dark matter particles in a condensate can be very light, $10^{-22}\\,{\\rm eV} \\lesssim m \\lesssim 10^2\\,{\\rm eV}$; the lower limit arises from constraints on small-scale structure formation, while the upper bound ensures that the density from thermal relics is not too large. Big-Bang nucleosynthesis constrains the temperature of deco...

  18. Asymmetric condensed dark matter

    Science.gov (United States)

    Aguirre, Anthony; Diez-Tejedor, Alberto

    2016-04-01

    We explore the viability of a boson dark matter candidate with an asymmetry between the number densities of particles and antiparticles. A simple thermal field theory analysis confirms that, under certain general conditions, this component would develop a Bose-Einstein condensate in the early universe that, for appropriate model parameters, could survive the ensuing cosmological evolution until now. The condensation of a dark matter component in equilibrium with the thermal plasma is a relativistic process, hence the amount of matter dictated by the charge asymmetry is complemented by a hot relic density frozen out at the time of decoupling. Contrary to the case of ordinary WIMPs, dark matter particles in a condensate must be lighter than a few tens of eV so that the density from thermal relics is not too large. Big-Bang nucleosynthesis constrains the temperature of decoupling to the scale of the QCD phase transition or above. This requires large dark matter-to-photon ratios and very weak interactions with standard model particles.

  19. Methods for natural gas and heavy hydrocarbon co-conversion

    Science.gov (United States)

    Kong, Peter C.; Nelson, Lee O.; Detering, Brent A.

    2009-02-24

    A reactor for reactive co-conversion of heavy hydrocarbons and hydrocarbon gases and includes a dielectric barrier discharge plasma cell having a pair of electrodes separated by a dielectric material and passageway therebetween. An inlet is provided for feeding heavy hydrocarbons and other reactive materials to the passageway of the discharge plasma cell, and an outlet is provided for discharging reaction products from the reactor. A packed bed catalyst may optionally be used in the reactor to increase efficiency of conversion. The reactor can be modified to allow use of a variety of light sources for providing ultraviolet light within the discharge plasma cell. Methods for upgrading heavy hydrocarbons are also disclosed.

  20. Simulation of Vapor Flows Between Two Closed Surfaces of Evaporation and Condensation at High Vacuum

    Institute of Scientific and Technical Information of China (English)

    张旭斌; 许春建; 周明

    2003-01-01

    The steady multi-component vapor flows between two closed surfaces of evaporation and condensation are investigated numerically by the nonlinear Bhatnagar-Gross-Krook equation. The mathematical model will make it possible to determine the profiles of the process variables between two surfaces of evaporation and condensation if the conditions of evaporation and condensation surfaces are taken into consideration. It is used to simulate the vapor behaviors of the pure dibutylphthalate and the ethylhexyl phthalate-ethylhexyl sebacate mixture. The effects of the liquid composition of the evaporation surface, the evaporation temperature, the condensation temperature and the distance between evaporation and condensation surfaces on the evaporation efficiency and separation factor are discussed.

  1. Applied bioremediation of petroleum hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Hinchee, R.E.; Kittel, J.A. [eds.] [Battelle Memorial Inst., Columbus, OH (United States); Reisinger, H.J. [ed.] [Integrated Science and Technology, Inc., Marietta, GA (United States)

    1995-12-31

    This volume is part of a ten volume set of papers derived from the Third International In Situ and On-Site Bioreclamation Symposium which was held in San Diego, California, in April 1995. The purpose of the conference was to provide a multidisciplinary forum for exchange of state-of-the-art information on bioremediation. The papers in this volume focus on petroleum hydrocarbon bioremediation, with an emphasis on pilot-scale and field-scale applications. Individual papers have been processed separately for inclusion in the appropriate data bases.

  2. OPTIMAL SYSNTHESIS PROCESSES OF LOW-TEMPERATURE CONDENSATION ASSOCIATED OIL GAS PLANT REFRIGERATION SYSTEM

    Directory of Open Access Journals (Sweden)

    O. Ostapenko

    2015-10-01

    Full Text Available Design of modern high-efficient systems is a key priority for the Energy Sector of Ukraine. The cooling technological streams of gas and oil refineries, including air coolers, water cooling and refrigeration systems for specific refrigerants are the objectives of the present study. Improvement of the refrigeration unit with refrigerant separation into fractions is mandatory in order to increase cooling capacity, lowering the boiling point of coolant and increasing the coefficient of target hydrocarbons extraction from the associated gas flow. In this paper it is shown that cooling temperature plays significant role in low-temperature condensation process. Two operation modes for refrigeration unit were proposed: permanent, in which the concentration of the refrigerant mixture does not change and dynamic, in which the concentration of refrigerant mixtures depends on the ambient temperature. Based on the analysis of exergy losses the optimal concentration of refrigerant mixtures propane/ethane for both modes of operation of the refrigeration unit has been determined. On the basis of the conducted pinch-analysis the modification of refrigeration unit with refrigerant separation into fractions was developed. Additional recuperative heat exchangers for utilization heat were added to the scheme. Several important measures to increase the mass flow rate of refrigerant through the second section of the refrigeration centrifugal compressor from 22.5 to 25 kg/s without violating the agreed operational mode of the compressor sections were implemented.

  3. Dropwise Condensation of Low Surface Tension Fluids on iCVD Grafted Polymer Films

    Science.gov (United States)

    Khalil, Karim; Gleason, Karen; Varanasi, Kripa

    2016-11-01

    A large majority of the work devoted to surface engineering for promoting dropwise condensation heat transfer has focused on steam. Much less attention has been dedicated to the condensation of low surface tension fluids such as hydrocarbons, cryogens, and fluorinated refrigerants, which are used in several industrial applications, including LNG storage and organic Rankine cycles used for heat recovery from low temperature sources such as biomass combustion, industrial waste, or geothermal heat sources. Most hydrophobic modifiers used previously to promote dropwise condensation are silane-based monolayers that have been shown to rapidly degrade under industrial conditions. Here we investigate condensation behavior of a variety of low surface tension liquids on durable covalently-grafted polymer films deposited using initiated chemical vapor deposition (iCVD) on metals such as titanium. We observe a four to seven-fold improvement in the vapor-side heat transfer coefficient by promoting dropwise condensation of low surface tension fluids on these stable films.

  4. Condensed Matter Nuclear Science

    Science.gov (United States)

    Biberian, Jean-Paul

    2006-02-01

    1. General. A tribute to gene Mallove - the "Genie" reactor / K. Wallace and R. Stringham. An update of LENR for ICCF-11 (short course, 10/31/04) / E. Storms. New physical effects in metal deuterides / P. L. Hagelstein ... [et al.]. Reproducibility, controllability, and optimization of LENR experiments / D. J. Nagel -- 2. Experiments. Electrochemistry. Evidence of electromagnetic radiation from Ni-H systems / S. Focardi ... [et al.]. Superwave reality / I. Dardik. Excess heat in electrolysis experiments at energetics technologies / I. Dardik ... [et al.]. "Excess heat" during electrolysis in platinum/K[symbol]CO[symbol]/nickel light water system / J. Tian ... [et al.]. Innovative procedure for the, in situ, measurement of the resistive thermal coefficient of H(D)/Pd during electrolysis; cross-comparison of new elements detected in the Th-Hg-Pd-D(H) electrolytic cells / F. Celani ... [et al.]. Emergence of a high-temperature superconductivity in hydrogen cycled Pd compounds as an evidence for superstoihiometric H/D sites / A. Lipson ... [et al.]. Plasma electrolysis. Calorimetry of energy-efficient glow discharge - apparatus design and calibration / T. B. Benson and T. O. Passell. Generation of heat and products during plasma electrolysis / T. Mizuno ... [et al.]. Glow discharge. Excess heat production in Pd/D during periodic pulse discharge current in various conditions / A. B. Karabut. Beam experiments. Accelerator experiments and theoretical models for the electron screening effect in metallic environments / A. Huke, K. Czerski, and P. Heide. Evidence for a target-material dependence of the neutron-proton branching ratio in d+d reactions for deuteron energies below 20keV / A. Huke ... [et al.]. Experiments on condensed matter nuclear events in Kobe University / T. Minari ... [et al.]. Electron screening constraints for the cold fusion / K. Czerski, P. Heide, and A. Huke. Cavitation. Low mass 1.6 MHz sonofusion reactor / R. Stringham. Particle detection. Research

  5. Convective condensation heat transfer in a horizontal condenser tube

    Energy Technology Data Exchange (ETDEWEB)

    Sarma, P.K. [College of Engineering, GITAM, Visakhapatnam (India); Sastry, C.V.N.; Rao, V.D. [Andhra Univ., College of Engineering, Visakhapatnam (India); Kakac, S.; Liu, H. [Miami Univ., College of Engineering, FL (United States)

    2002-03-01

    The purpose of this article is to solve analytically the problem of convective condensation of vapors inside a horizontal condenser tube. Homogeneous model approach is employed in the estimation of shear velocity, which is subsequently, made use of in predicting local convective condensation heat transfer coefficients. The resulting analysis of the present study is compared with some of the available equations in the literature. It is observed that the agreement is reasonably satisfactory validating the assumptions and the theory presented. (authors)

  6. A case study of the intrinsic bioremediation of petroleum hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Barker, G.W.; Raterman, K.T.; Fisher, J.B.; Corgan, J.M. [and others

    1995-12-31

    Condensate liquids have been found to contaminate soil and groundwater at two gas production sites in the Denver Basin operated by Amoco Production Co. These sites have been closely monitored since July 1993 to determine whether intrinsic aerobic or anaerobic bioremediation of hydrocarbons occurs at a sufficient rate and to an adequate endpoint to support a no-intervention decision. Groundwater monitoring and analysis of soil cores suggest that intrinsic bioremediation is occurring at these sites by multiple pathways including aerobic oxidation, Fe{sup 3+} reduction, and sulfate reduction. In laboratory experiments the addition of gas condensate hydrocarbons to saturated soil from the gas production site stimulated sulfate reduction under anaerobic and oxygen-limiting conditions, and nitrate and Fe{sup 3+} reduction under oxygen-limiting conditions, compared to biotic controls that lacked hydrocarbon and sterile controls. The sulfate reduction corresponded to a reduction in the amount of toluene relative to other hydrocarbons. These results confirmed that subsurface soils at the gas production site have the potential for intrinsic bioremediation of hydrocarbons.

  7. Superfluidity in polariton condensates

    Energy Technology Data Exchange (ETDEWEB)

    Amo, A; Lefrere, J; Adrados, C; Giacobino, E; Bramati, A [Laboratoire Kastler Brossel, UPMC, ENS and CNRS, 75005 Paris (France); Sanvitto, D; Laussy, F P; Ballarini, D; Valle, E del; MartIn, M D; Tejedor, C; Vina, L [SEMICUAM, Universidad Autonoma de Madrid, 28049 Madrid (Spain); Pigeon, S; Ciuti, C [Laboratoire Materiaux et Phenomenes Quantiques, UMR 7162, Universite Paris Diderot-Paris 7 and CNRS, 75013 Paris (France); Carusotto, I [BEC-CNR-INFM and Dip. di Fisica, Universita di Trento, I-38050 Povo (Italy); Houdre, R [Institut de Photonique et d' Electronique Quantique, Ecole Polytechnique Federale de Lausanne, Station 3, CH-1015 Lausanne (Switzerland); LemaItre, A; Bloch, J [Laboratoire de Photonique et de Nanostructures, CNRS, Route de Nozay, 91460 Marcoussis (France); Krizhanovskii, D N; Skolnick, M S, E-mail: alberto.amo@spectro.jussieu.f [Department of Physics and Astronomy, University of Sheffield, S3 7RH, Sheffield (United Kingdom)

    2010-02-01

    Exciton-polaritons, two-dimensional composite bosons arising from the quantum mixture of excitons and photons, can manifest many-body quantum effects at liquid He temperatures (4 K). Interestingly, polaritons are predicted to behave as particular quantum fluids due to their out of equilibrium character, arising from their reduced lifetime (shorter than their thermalization time). Here we report the observation of superfluid motion of polaritons in semiconductor microcavities both under cw and pulsed excitation. Among other signatures, superfluidity is manifested via the absence of scattering of the polariton condensates when encountering a localized defect in their flow path.

  8. Nanocarbon condensation in detonation

    Science.gov (United States)

    Bastea, Sorin

    2017-01-01

    We analyze the definition of the Gibbs free energy of a nanoparticle in a reactive fluid environment, and propose an approach for predicting the size of carbon nanoparticles produced by the detonation of carbon-rich explosives that regards their condensation as a nucleation process and takes into account absolute entropy effects of the cluster population. The results are consistent with experimental observations and indicate that such entropy considerations are important for determining chemical equilibrium states in energetic materials that contain an excess of carbon. The analysis may be useful for other applications that deal with the nucleation of nanoparticles under reactive conditions. PMID:28176827

  9. Galaxies as condensates

    CERN Document Server

    Bugg, D V

    2012-01-01

    A novel interpretation of MOND is presented. For galactic data, in addition to Newtonian acceleration, there is an attractive acceleration peaking at Milgrom's parameter a_0. The peak lies within experimental error where a_0 = cH_0/2\\pi and H_0 is the present-time value of the Hubble constant. This peaking may be understood in terms of quantum mechanical mixing between Newtonian gravitation and the Hubble mechanism. There are five pointers towards galaxies being Fermi-Dirac condensates.

  10. Confinement Contains Condensates

    Energy Technology Data Exchange (ETDEWEB)

    Brodsky, Stanley J.; Roberts, Craig D.; Shrock, Robert; Tandy, Peter C.

    2012-03-12

    Dynamical chiral symmetry breaking and its connection to the generation of hadron masses has historically been viewed as a vacuum phenomenon. We argue that confinement makes such a position untenable. If quark-hadron duality is a reality in QCD, then condensates, those quantities that have commonly been viewed as constant empirical mass-scales that fill all spacetime, are instead wholly contained within hadrons; i.e., they are a property of hadrons themselves and expressed, e.g., in their Bethe-Salpeter or light-front wave functions. We explain that this paradigm is consistent with empirical evidence, and incidentally expose misconceptions in a recent Comment.

  11. Bose-Einstein condensation and indirect excitons: a review.

    Science.gov (United States)

    Combescot, Monique; Combescot, Roland; Dubin, François

    2017-06-01

    We review recent progress on Bose-Einstein condensation (BEC) of semiconductor excitons. The first part deals with theory, the second part with experiments. This Review is written at a time where the problem of exciton Bose-Einstein condensation has just been revived by the understanding that the exciton condensate must be dark because the exciton ground state is not coupled to light. Here, we theoretically discuss this missed understanding before providing its experimental support through experiments that scrutinize indirect excitons made of spatially separated electrons and holes. The theoretical part first discusses condensation of elementary bosons. In particular, the necessary inhibition of condensate fragmentation by exchange interaction is stressed, before extending the discussion to interacting bosons with spin degrees of freedom. The theoretical part then considers composite bosons made of two fermions like semiconductor excitons. The spin structure of the excitons is detailed, with emphasis on the crucial fact that ground-state excitons are dark: indeed, this imposes the exciton Bose-Einstein condensate to be not coupled to light in the dilute regime. Condensate fragmentations are then reconsidered. In particular, it is shown that while at low density, the exciton condensate is fully dark, it acquires a bright component, coherent with the dark one, beyond a density threshold: in this regime, the exciton condensate is 'gray'. The experimental part first discusses optical creation of indirect excitons in quantum wells, and the detection of their photoluminescence. Exciton thermalisation is also addressed, as well as available approaches to estimate the exciton density. We then switch to specific experiments where indirect excitons form a macroscopic fragmented ring. We show that such ring provides efficient electrostatic trapping in the region of the fragments where an essentially-dark exciton Bose-Einstein condensate is formed at sub-Kelvin bath

  12. Bose-Einstein condensation and indirect excitons: a review

    Science.gov (United States)

    Combescot, Monique; Combescot, Roland; Dubin, François

    2017-06-01

    We review recent progress on Bose-Einstein condensation (BEC) of semiconductor excitons. The first part deals with theory, the second part with experiments. This Review is written at a time where the problem of exciton Bose-Einstein condensation has just been revived by the understanding that the exciton condensate must be dark because the exciton ground state is not coupled to light. Here, we theoretically discuss this missed understanding before providing its experimental support through experiments that scrutinize indirect excitons made of spatially separated electrons and holes. The theoretical part first discusses condensation of elementary bosons. In particular, the necessary inhibition of condensate fragmentation by exchange interaction is stressed, before extending the discussion to interacting bosons with spin degrees of freedom. The theoretical part then considers composite bosons made of two fermions like semiconductor excitons. The spin structure of the excitons is detailed, with emphasis on the crucial fact that ground-state excitons are dark: indeed, this imposes the exciton Bose-Einstein condensate to be not coupled to light in the dilute regime. Condensate fragmentations are then reconsidered. In particular, it is shown that while at low density, the exciton condensate is fully dark, it acquires a bright component, coherent with the dark one, beyond a density threshold: in this regime, the exciton condensate is ‘gray’. The experimental part first discusses optical creation of indirect excitons in quantum wells, and the detection of their photoluminescence. Exciton thermalisation is also addressed, as well as available approaches to estimate the exciton density. We then switch to specific experiments where indirect excitons form a macroscopic fragmented ring. We show that such ring provides efficient electrostatic trapping in the region of the fragments where an essentially-dark exciton Bose-Einstein condensate is formed at sub-Kelvin bath

  13. Silurian shale origin for light oil, condensate, and gas in Algeria and the Middle East

    Energy Technology Data Exchange (ETDEWEB)

    Zumberge, J.E. (GeoMark Research Inc., Houston, TX (United States)); Macko, S. (Univ. of Virginia, Charlottesville, VA (United States)) Engel, M. (Univ. of Oklahoma, Norman, OK (United States)) (and others)

    1996-01-01

    Two of the largest gas fields in the world, Hasi R'Mel, Algeria and North Dome, Qatar, also contain substantial condensate and light oil reserves. Gas to source rock geochemical correlation is difficult due to the paucity of molecular parameters in the former although stable isotope composition is invaluable. However, by correlating source rocks with light oils and condensates associated with gas production using traditional geochemical parameters such as biomarkers and isotopes, a better understanding of the origin of the gas is achieved. Much of the crude oil in the Ghadames/Illizi Basins of Algeria has long been thought to have been generated from Silurian shales. New light oil discoveries in Saudi Arabia have also been shown to originate in basal euxinic Silurian shales. Key sterane and terpane biomarkers as well as the stable carbon isotopic compositions of the C15+ saturate and aromatic hydrocarbon fractions allow for the typing of Silurian-sourced, thermally mature light oils in Algeria and the Middle East. Even though biomarkers are often absent due to advanced thermal maturity, condensates can be correlated to the light oils using (1) carbon isotopes of the residual heavy hydrocarbon fractions, (2) light hydrocarbon distributions (e.g., C7 composition), and (3) compound specific carbon isotopic composition of the light hydrocarbons. The carbon isotopes of the C2-C4 gas components ran then be compared to the associated condensate and light oil isotopic composition.

  14. Silurian shale origin for light oil, condensate, and gas in Algeria and the Middle East

    Energy Technology Data Exchange (ETDEWEB)

    Zumberge, J.E. [GeoMark Research Inc., Houston, TX (United States); Macko, S. [Univ. of Virginia, Charlottesville, VA (United States)] Engel, M. [Univ. of Oklahoma, Norman, OK (United States)] [and others

    1996-12-31

    Two of the largest gas fields in the world, Hasi R`Mel, Algeria and North Dome, Qatar, also contain substantial condensate and light oil reserves. Gas to source rock geochemical correlation is difficult due to the paucity of molecular parameters in the former although stable isotope composition is invaluable. However, by correlating source rocks with light oils and condensates associated with gas production using traditional geochemical parameters such as biomarkers and isotopes, a better understanding of the origin of the gas is achieved. Much of the crude oil in the Ghadames/Illizi Basins of Algeria has long been thought to have been generated from Silurian shales. New light oil discoveries in Saudi Arabia have also been shown to originate in basal euxinic Silurian shales. Key sterane and terpane biomarkers as well as the stable carbon isotopic compositions of the C15+ saturate and aromatic hydrocarbon fractions allow for the typing of Silurian-sourced, thermally mature light oils in Algeria and the Middle East. Even though biomarkers are often absent due to advanced thermal maturity, condensates can be correlated to the light oils using (1) carbon isotopes of the residual heavy hydrocarbon fractions, (2) light hydrocarbon distributions (e.g., C7 composition), and (3) compound specific carbon isotopic composition of the light hydrocarbons. The carbon isotopes of the C2-C4 gas components ran then be compared to the associated condensate and light oil isotopic composition.

  15. Gas condensate reservoir characterisation for CO2 geological storage

    Science.gov (United States)

    Ivakhnenko, A. P.

    2012-04-01

    During oil and gas production hydrocarbon recovery efficiency is significantly increased by injecting miscible CO2 gas in order to displace hydrocarbons towards producing wells. This process of enhanced oil recovery (EOR) might be used for the total CO2 storage after complete hydrocarbon reservoir depletion. This kind of potential storage sites was selected for detailed studies, including generalised development study to investigate the applicability of CO2 for storages. The study is focused on compositional modelling to predict the miscibility pressures. We consider depleted gas condensate field in Kazakhstan as important target for CO2 storage and EOR. This reservoir being depleted below the dew point leads to retrograde condensate formed in the pore system. CO2 injection in the depleted gas condensate reservoirs may allow enhanced gas recovery by reservoir pressurisation and liquid re-vaporisation. In addition a number of geological and petrophysical parameters should satisfy storage requirements. Studied carbonate gas condensate and oil field has strong seal, good petrophysical parameters and already proven successful containment CO2 and sour gas in high pressure and high temperature (HPHT) conditions. The reservoir is isolated Lower Permian and Carboniferous carbonate platform covering an area of about 30 km. The reservoir contains a gas column about 1.5 km thick. Importantly, the strong massive sealing consists of the salt and shale seal. Sour gas that filled in the oil-saturated shale had an active role to form strong sealing. Two-stage hydrocarbon saturation of oil and later gas within the seal frame were accompanied by bitumen precipitation in shales forming a perfect additional seal. Field hydrocarbon production began three decades ago maintaining a strategy in full replacement of gas in order to maintain pressure of the reservoir above the dew point. This was partially due to the sour nature of the gas with CO2 content over 5%. Our models and

  16. Topology and Fermionic Condensate

    Science.gov (United States)

    Kulikov, I.; Pronin, P.

    The purpose of this paper is to investigate an influence of a space-time topology on the formation of fermionic condensate in the model with four-fermion interaction ()2. The value for the space-time with topology of R1 × R1 × S1 is found. Moreover a relation of the value of fermionic condensate to a periodic length is studied. In this connection the possibility of a relation of the topologic deposits to structure of hadrons is discussed.Translated AbstractTopologie und FermikondensatEs wird der Einfluß einer Raum-Zeittopologie auf die Bildung des Fermikondensats in einem Modell mit Vierfermionenwechselwirkung ()2 untersucht. Für eine Raum-Zeit mit der Topologie R1 × R2 × S1 werden die Parameter gegeben. Weiterhin wird die Relation der Größe des Fermikondensats zu einer periodischen Länge untersucht. In diesem Zusammenhang wird die Verbindung des topologischen Depots zur Struktur der Hadronen diskutiert.

  17. Studies on corrosion control of naphtha fractions in overhead condensing system using laboratory distillation device

    Energy Technology Data Exchange (ETDEWEB)

    Saxena, R.C.; Jayaraman, A.; Chauhan, R.K; Goyal, H.B. [Indian Institute of Petroleum, Dehradun-248005 (India)

    2010-10-15

    Corrosion in the overhead condensing system of atmospheric distillation units is a common occurrence in petroleum refineries worldwide. These corrosion problems are influenced by the presence of three phases: vapours, liquid hydrocarbons and aqueous phase containing hydrochloric acid formed during distillation by decomposition of chloride salts of calcium and magnesium. Present studies highlight the corrosion control of naphtha fractions of Bombay High and Dubai crude oils in laboratory distillation device by chemical treatment using various corrosion inhibitors having different functional groups. These studies were carried out using two phase systems (aqueous-hydrocarbon) in the distillation device having facilities for monitoring the corrosion and temperatures in vapour condensing region and liquid condensate. Corrosion monitoring was carried out by potentiodynamic polarization technique and dissolved iron analysis using inductively coupled plasma atomic emission spectroscopy (ICPAES). Experimental findings indicate that Dubai naphtha fraction is more corrosive in nature when compared to Bombay High naphtha. This observation can also be explained on the basis of characterization of both crude oils and their naphtha fractions. At normally recommended dosage level as in refinery overhead systems, water soluble corrosion inhibitors are more effective than hydrocarbon soluble ones in the vapour condensing region as well as in the liquid condensate of both naphtha fractions. (author)

  18. Oxygenated Derivatives of Hydrocarbons

    Science.gov (United States)

    For the book entitled “Insect Hydrocarbons: Biology, Biochemistry and Chemical Ecology”, this chapter presents a comprehensive review of the occurrence, structure and function of oxygenated derivatives of hydrocarbons. The book chapter focuses on the occurrence, structural identification and functi...

  19. Hydrocarbon Spectral Database

    Science.gov (United States)

    SRD 115 Hydrocarbon Spectral Database (Web, free access)   All of the rotational spectral lines observed and reported in the open literature for 91 hydrocarbon molecules have been tabulated. The isotopic molecular species, assigned quantum numbers, observed frequency, estimated measurement uncertainty and reference are given for each transition reported.

  20. Polariton condensates put in motion

    Energy Technology Data Exchange (ETDEWEB)

    Sanvitto, D; Amo, A; Vina, L [Departamento de Fisica de Materiales, Universidad Autonoma de Madrid, E-28049, Madrid (Spain); Laussy, F P; Tejedor, C [Departamento de Fisica Teorica de la Materia Condensada, Universidad Autonoma de Madrid, E-28049, Madrid (Spain); LemaItre, A; Bloch, J, E-mail: daniele.sanvitto@uam.es [LPN/CNRS, Route de Nozay, F-91460, Marcoussis (France)

    2010-04-02

    We present several examples of the interesting phenomenology shown by a moving polariton condensate in semiconductor microcavities. The superfluid behavior is probed by colliding the polariton condensate against physical obstacles in the form of natural defects of the sample, demonstrating a clear suppression of scattering when the speed of the flow lies below the critical velocity. At higher velocities Cerenkov-like shock waves around the defect and disruption of the condensate are also observed.

  1. Quantitative assessment of DNA condensation.

    Science.gov (United States)

    Trubetskoy, V S; Slattum, P M; Hagstrom, J E; Wolff, J A; Budker, V G

    1999-02-15

    A fluorescent method is proposed for assessing DNA condensation in aqueous solutions with variety of condensing agents. The technique is based on the effect of concentration-dependent self-quenching of covalently bound fluorophores upon DNA collapse. The method allows a more precise determination of charge equivalency in titration experiments with various polycations. The technique's ability to determine the number of DNA molecules that are condensed together in close proximity is under further investigation.

  2. Plasma devices for hydrocarbon reformation

    KAUST Repository

    Cha, Min Suk

    2017-02-16

    Plasma devices for hydrocarbon reformation are provided. Methods of using the devices for hydrocarbon reformation are also provided. The devices can include a liquid container to receive a hydrocarbon source, and a plasma torch configured to be submerged in the liquid. The plasma plume from the plasma torch can cause reformation of the hydrocarbon. The device can use a variety of plasma torches that can be arranged in a variety of positions in the liquid container. The devices can be used for the reformation of gaseous hydrocarbons and/or liquid hydrocarbons. The reformation can produce methane, lower hydrocarbons, higher hydrocarbons, hydrogen gas, water, carbon dioxide, carbon monoxide, or a combination thereof.

  3. Method for producing diene hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Tsaylingol' d, A.L.; Abayev, G.N.; Mikhaylov, R.K.; Stepanov, G.A.; Troitskiy, A.P.

    1980-04-28

    A method is claimed for producing diene hydrocarbons by oxidational dehydration of paraffin or olefin hydrocarbons in a fluidized bed of a concentrate with circulation of the latter between the zones of the reaction of regeneration with the help of circulation stand pipes. To increase the efectiveness of the process, it is proposed to circulate the concentrate between the zones of reaction and regeneration, sequentially disposed in a common apparatus with a difference in the concentration of the concentrate in the circulation stand pipes disposed in the same apparatus and the zone of the reaction equal to 20-700 kg/m/sup 3/. For example, the process of oxidational dehydration of butane through the proposed system is conducted in an apparatus with a diameter of 1,000 mm, a circulation stand pipe diameter of 500 mm, a linear gas speed in the reaction zone of 0.6 m/s, and in the circulation stand pipe of 0.15 m/s. The concentration of the concentrate in the dehydration zone is 640 kg/m/sup 3/ and in the stand pipe, 970 kg/m/sup 3/. The volumetric ratio of the n-C/sub 4/H/sub 10/:air, air:vapor vapor in the form of a condensate is 1:7.2:4.5:5.5. The output of the butadiene is: in the passed butane, 32.9% and in the broken down butane, 52.5%. The butane conversion is 62.6%. The losses of the concentrate with the contact gas and with the regeneration gases is 1/3 as much for the supplied butane, than in a known method. The method makes it possible to reduce the air expenditure by 60%, to reduce the concentrate losses by 2-3 times and to simplify the industrial system.

  4. Nonequilibrium Weak Processes in Kaon Condensation; 2, Kinetics of condensation

    CERN Document Server

    Muto, T; Iwamoto, N; Muto, Takumi; Tatsumi, Toshitaka; Iwamoto, Naoki

    2000-01-01

    The kinetics of negatively charged kaon condensation in the early stages of a newly born neutron star is considered. The thermal kaon process, in which kaons are thermally produced by nucleon-nucleon collisions, is found to be dominant throughout the equilibration process. Temporal changes of the order parameter of the condensate and the number densities of the chemical species are obtained from the rate equations, which include the thermal kaon reactions as well as the kaon-induced Urca and the modified Urca reactions. It is shown that the dynamical evolution of the condensate is characterized by three stages: the first, prior to establishment of a condensate, the second, during the growth and subsequent saturation of the condensate, and the third, near chemical equilibrium. The connection between the existence of a soft kaon mode and the instability of the noncondensed state is discussed. Implications of the nonequilibrium process on the possible delayed collapse of a protoneutron star are also mentioned.

  5. Condensation Processes in Geothermal Systems

    Science.gov (United States)

    Norman, D. I.; Moore, J. N.

    2005-12-01

    We model condensation processes in geothermal systems to understand how this process changes fluid chemistry. We assume two processes operate in geothermal systems: 1) condensation of a vapor phase derived by boiling an aqueous geothermal fluid into a cool near surface water and 2) condensation of a magmatic vapor by a deep circulating meteoric thermal fluid. It is assumed that the condensation process has two stages. Initially the condensing fluid is under saturated in gaseous species. Condensation of the vapor phase continues until the pressure on the fluid equals the sum of the partial pressures of water and the dissolved gaseous species. At that time bubbles flux through the condensing fluid. In time the fluid and fluxing gas phase come to equilibrium. Calculation shows that during the second stage of the condensation process the liquid phase becomes enriched in more soluble gaseous species like CO2 and H2S, and depleted in less soluble species like CH4 and N2. Stage 2 condensation processes can therefore be monitored by ratios of more and less condensable species like CO2/N2. Condensation of vapor released by boiling geothermal fluids results in liquids with high concentrations of H2S and CO2 like is seen in geothermal system steam-heated waters. Condensation of a magmatic vapor into circulating meteoric water has been proposed, but not well demonstrated. We compare to our models the Cerro Prieto, Mexico gas analysis data set collected over twelve years time by USGS personnel. It was assumed for modeling that the Cerro Prieto geothermal fluids are circulating meteoritic fluids with N2/Ar ratios about 40 to which is added a magmatic vapor with N2/Ar ratio = 400. The Cerro Prieto analyses show a strong correlation between N2/Ar and CO2/N2 as predicted by calculation. Two dimensional image plots of well N2/Ar + CO2/N2 show a bull's-eye pattern on the geothermal field. Image plots of analyses collected over a year or less time show N2/Ar and CO2/N2 hot spots

  6. Microgravity condensing heat exchanger

    Science.gov (United States)

    Thomas, Christopher M. (Inventor); Ma, Yonghui (Inventor); North, Andrew (Inventor); Weislogel, Mark M. (Inventor)

    2011-01-01

    A heat exchanger having a plurality of heat exchanging aluminum fins with hydrophilic condensing surfaces which are stacked and clamped between two cold plates. The cold plates are aligned radially along a plane extending through the axis of a cylindrical duct and hold the stacked and clamped portions of the heat exchanging fins along the axis of the cylindrical duct. The fins extend outwardly from the clamped portions along approximately radial planes. The spacing between fins is symmetric about the cold plates, and are somewhat more closely spaced as the angle they make with the cold plates approaches 90.degree.. Passageways extend through the fins between vertex spaces which provide capillary storage and communicate with passageways formed in the stacked and clamped portions of the fins, which communicate with water drains connected to a pump externally to the duct. Water with no entrained air is drawn from the capillary spaces.

  7. Using supercritical fluids to refine hydrocarbons

    Science.gov (United States)

    Yarbro, Stephen Lee

    2014-11-25

    This is a method to reactively refine hydrocarbons, such as heavy oils with API gravities of less than 20.degree. and bitumen-like hydrocarbons with viscosities greater than 1000 cp at standard temperature and pressure using a selected fluid at supercritical conditions. The reaction portion of the method delivers lighter weight, more volatile hydrocarbons to an attached contacting device that operates in mixed subcritical or supercritical modes. This separates the reaction products into portions that are viable for use or sale without further conventional refining and hydro-processing techniques. This method produces valuable products with fewer processing steps, lower costs, increased worker safety due to less processing and handling, allow greater opportunity for new oil field development and subsequent positive economic impact, reduce related carbon dioxide, and wastes typical with conventional refineries.

  8. Method and apparatus for high-efficiency direct contact condensation

    Science.gov (United States)

    Bharathan, Desikan; Parent, Yves; Hassani, A. Vahab

    1999-01-01

    A direct contact condenser having a downward vapor flow chamber and an upward vapor flow chamber, wherein each of the vapor flow chambers includes a plurality of cooling liquid supplying pipes and a vapor-liquid contact medium disposed thereunder to facilitate contact and direct heat exchange between the vapor and cooling liquid. The contact medium includes a plurality of sheets arranged to form vertical interleaved channels or passageways for the vapor and cooling liquid streams. The upward vapor flow chamber also includes a second set of cooling liquid supplying pipes disposed beneath the vapor-liquid contact medium which operate intermittently in response to a pressure differential within the upward vapor flow chamber. The condenser further includes separate wells for collecting condensate and cooling liquid from each of the vapor flow chambers. In alternate embodiments, the condenser includes a cross-current flow chamber and an upward flow chamber, a plurality of upward flow chambers, or a single upward flow chamber. The method of use of the direct contact condenser of this invention includes passing a vapor stream sequentially through the downward and upward vapor flow chambers, where the vapor is condensed as a result of heat exchange with the cooling liquid in the contact medium. The concentration of noncondensable gases in the resulting condensate-liquid mixtures can be minimized by controlling the partial pressure of the vapor, which depends in part upon the geometry of the vapor-liquid contact medium. In another aspect of this invention, the physical and chemical performance of a direct contact condenser can be predicted based on the vapor and coolant compositions, the condensation conditions. and the geometric properties of the contact medium.

  9. Orientifold Planar Equivalence: The Chiral Condensate

    CERN Document Server

    Armoni, A; Patella, A; Pica, C

    2008-01-01

    The recently introduced orientifold planar equivalence is a promising tool for solving non-perturbative problems in QCD. One of the predictions of orientifold planar equivalence is that the chiral condensates of a theory with $N_f$ flavours of Dirac fermions in the symmetric (or antisymmetric) representation and $N_f$ flavours of Majorana fermions in the adjoint representation have the same large $N$ value for any value of the mass of the (degenerate) fermions. Assuming the invariance of the theory under charge conjugation, we prove this statement on the lattice for staggered quenched condensates in SU($N$) Yang-Mills in the large $N$ limit. Then, we compute numerically those quenched condensates for $N$ up to 8. After separating the even from the odd corrections in $1/N$, we are able to show that our data support the equivalence; however, unlike other quenched observables, subleading terms in $1/N$ are needed for describing the data for the symmetric and antisymmetric representation at $N$=3. Possible lesson...

  10. PPOOLEX experiments on wall condensation

    Energy Technology Data Exchange (ETDEWEB)

    Laine, J.; Puustinen, M. (Lappeenranta Univ. of Technology, Nuclear Safety Research Unit (Finland))

    2009-08-15

    This report summarizes the results of the wall condensation experiments carried out in December 2008 and January 2009 with the scaled down PPOOLEX test facility designed and constructed at Lappeenranta University of Technology. Steam was blown into the dry well compartment and from there through a DN200 blowdown pipe to the condensation pool. Altogether five experiments, each consisting of several blows, were carried out. The main purpose of the experiment series was to study wall condensation phenomenon inside the dry well compartment while steam is discharged through it into the condensation pool and to produce comparison data for CFD calculations at VTT. The PPOOLEX test facility is a closed stainless steel vessel divided into two compartments, dry well and wet well. For the wall condensation experiments the test facility was equipped with a system for collecting and measuring the amount of condensate from four different wall segments of the dry well compartment. A thermo graphic camera was used in a couple of experiments for filming the outside surface of the dry well wall. The effect of the initial temperature level of the dry well structures and of the steam flow rate for the accumulation of condensate was studied. The initial temperature level of the dry well structures varied from 23 to 99 deg. C. The steam flow rate varied from 90 to 690 g/s and the temperature of incoming steam from 115 to 160 deg. C. During the initial phase of steam discharge the accumulation of condensate was strongly controlled by the temperature level of the dry well structures; the lower the initial temperature level was the more condensate was accumulated. As the dry well structural temperatures increased the condensation process slowed down. Most of the condensate usually accumulated during the first 200 seconds of the discharge. However, the condensation process never completely stopped because a small temperature difference remained between the dry well atmosphere and inner wall

  11. Decay of Ultralight Axion Condensates

    Energy Technology Data Exchange (ETDEWEB)

    Eby, Joshua; Ma, Michael; Suranyi, Peter; Wijewardhana, L. C.R.

    2017-05-15

    Axion particles can form macroscopic condensates, whose size can be galactic in scale for models with very small axion masses $m\\sim10^{-22}$ eV, and which are sometimes referred to under the name of Fuzzy Dark Matter. Many analyses of these condensates are done in the non-interacting limit, due to the weakness of the self-interaction coupling of axions. We investigate here how certain results change upon inclusion of these interactions, finding a decreased maximum mass and a modified mass-radius relationship. Further, these condensates are, in general, unstable to decay through number-changing interactions. We analyze the stability of galaxy-sized condensates of axion-like particles, and sketch the parameter space of stable configurations as a function of a binding energy parameter. We find a strong lower bound on the size of Fuzzy Dark Matter condensates which are stable to decay, with lifetimes longer than the age of the universe.

  12. APPARATUS FOR CONDENSATION AND SUBLIMATION

    Science.gov (United States)

    Schmidt, R.J.; Fuis, F. Jr.

    1958-10-01

    An apparatus is presented for the sublimation and condensation of uranium compounds in order to obtain an improved crystalline structure of this material. The apparatus comprises a vaporizing chamber and condensing structure connected thereto. There condenser is fitted with a removable liner having a demountable baffle attached to the liner by means of brackets and a removable pin. The baffle is of spiral cross-section and is provided with cooling coils disposed between the surfaces of the baffle for circulation of a temperature controlling liquid within the baffle. The cooling coll provides for controlllng the temperature of the baffle to insure formatlon of a satisfactory condensate, and the removable liner facilitates the removal of condensate formed during tbe sublimation process.

  13. Integral Reactor Containment Condensation Model and Experimental Validation

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Qiao [Oregon State Univ., Corvallis, OR (United States); Corradini, Michael [Univ. of Wisconsin, Madison, WI (United States)

    2016-05-02

    ranging from 4 to 21 bar with three different static inventories of non-condensable gas. Condensation and heat transfer rates were evaluated employing several methods, notably from measured temperature gradients in the HTP as well as measured condensate formation rates. A detailed mass and energy accounting was used to assess the various measurement methods and to support simplifying assumptions required for the analysis. Condensation heat fluxes and heat transfer coefficients are calculated and presented as a function of pressure to satisfy the objectives of this investigation. The major conclusions for those tests are summarized below: (1) In the steam blow-down tests, the initial condensation heat transfer process involves the heating-up of the containment heat transfer plate. An inverse heat conduction model was developed to capture the rapid transient transfer characteristics, and the analysis method is applicable to SMR safety analysis. (2) The average condensation heat transfer coefficients for different pressure conditions and non-condensable gas mass fractions were obtained from the integral test facility, through the measurements of the heat conduction rate across the containment heat transfer plate, and from the water condensation rates measurement based on the total energy balance equation. 15 (3) The test results using the measured HTP wall temperatures are considerably lower than popular condensation models would predict mainly due to the side wall conduction effects in the existing MASLWR integral test facility. The data revealed the detailed heat transfer characteristics of the model containment, important to the SMR safety analysis and the validation of associated evaluation model. However this approach, unlike separate effect tests, cannot isolate the condensation heat transfer coefficient over the containment wall, and therefore is not suitable for the assessment of the condensation heat transfer coefficient against system pressure and noncondensable

  14. New observational constraints on hydrocarbon chemistry in Saturn's upper atmosphere

    Science.gov (United States)

    Koskinen, Tommi; Moses, Julianne I.; West, Robert; Guerlet, Sandrine; Jouchoux, Alain

    2016-10-01

    Until now there have been only a few observations of hydrocarbons and photochemical haze in the region where they are produced in Saturn's upper atmosphere. We present new results on hydrocarbon abundances and atmospheric structure based on more than 40 stellar occultations observed by the Cassini/UVIS instrument that we have combined with results from Cassini/CIRS to generate full atmosphere structure models. In addition to detecting CH4, C2H2, C2H4 and C2H6, we detect benzene (C6H6) in UVIS occultations that probe different latitudes and present the first vertical abundance profiles for this species in its production region. Benzene is the simplest ring polyaromatic hydrocarbon (PAH) and a stepping stone to the formation of more complex molecules that are believed to form stratospheric haze. Our calculations show that the observed abundances of benzene can be explained by solar-driven ion chemistry that is enhanced by high-latitude auroral production at least in the northern spring hemisphere. Condensation of benzene and heavier hydrocarbons is possible in the cold polar night of the southern winter where we detect evidence for high altitude haze. We also report on substantial variability in the CH4 profiles that arise from dynamics and affects the minor hydrocarbon abundances. Our results demonstrate the importance of hydrocarbon ion chemistry and coupled models of chemistry and dynamics for future studies of Saturn's upper atmosphere.

  15. Thraustochytrid protists degrade hydrocarbons

    Digital Repository Service at National Institute of Oceanography (India)

    Raikar, M.T.; Raghukumar, S.; Vani, V.; David, J.J.; Chandramohan, D.

    Although thraustochytrid protists are known to be of widespread occurrence in the sea, their hydrocarbon-degrading abilities have never been investigated. We isolated thraustochytrids from coastal waters and sediments of Goa coast by enriching MPN...

  16. The 18th Annual Condensed Matter Physics Meeting

    Science.gov (United States)

    Chaplin, Don; Hutchinson, Wayne; Yazidjoglou, Nick; Stewart, Glen

    The Handbook contains abstracts of oral and poster presentations covering various aspects of condensed matter physics such as magnetism, superconductivity, semiconductor materials and their properties, as well as the use of nuclear techniques in studies of these materials. 162 contributions have been considered to be in the INIS subject scope and were indexed separately.

  17. Combustion process for synthesis of carbon nanomaterials from liquid hydrocarbon

    Science.gov (United States)

    Diener, Michael D.; Alford, J. Michael; Nabity, James; Hitch, Bradley D.

    2007-01-02

    The present invention provides a combustion apparatus for the production of carbon nanomaterials including fullerenes and fullerenic soot. Most generally the combustion apparatus comprises one or more inlets for introducing an oxygen-containing gas and a hydrocarbon fuel gas in the combustion system such that a flame can be established from the mixed gases, a droplet delivery apparatus for introducing droplets of a liquid hydrocarbon feedstock into the flame, and a collector apparatus for collecting condensable products containing carbon nanomaterials that are generated in the combustion system. The combustion system optionally has a reaction zone downstream of the flame. If this reaction zone is present the hydrocarbon feedstock can be introduced into the flame, the reaction zone or both.

  18. Identification of some novel tetracyclic diterpene hydrocarbons in petroleum

    Energy Technology Data Exchange (ETDEWEB)

    Petrov, A.A.; Pehk, T.Y.; Vorobieva, N.S.; Zemskova, Z.K. (Institute of Geology and Exploitation of Combustible Minerals, Moscow (USSR))

    1988-01-01

    A new group of tetracyclic diterpene hydrocarbons of molecular formula C{sub 19}H{sub 32} has been found in the Jurassic oils and condensates of the Central Kara-Kum (Turkmenia, U.S.S.R.). The structure of the hydrocarbons has been determined by gas chromatography-mass spectrometry and {sup 1}H and {sup 13}C NMR. Of the compounds identified 4,8-dimethyl-13-isopropyltetracyclo(6.6.0.0{sup 1,11}O{sup 3,7})- and 5,14-dimethyl-10-isopropyltetracyclo = (6.4.1.1.{sup 1,9}O{sup 4,13})tetradecanes are present in the highest concentrations. Some ideas are put forward about the source and the reactions involved in the formation of the hydrocarbons under natural conditions by the enzymic C{sub 5} cyclization of aliphatic isoprenoids.

  19. Separation of Petroleum Hydrocarbon Degrading Bacteria and its Application in Oily Sludge%石油烃降解菌的分离及在含油污泥中的应用

    Institute of Scientific and Technical Information of China (English)

    姚力芬; 李丹; 陈丽华; 李广彬; 孙盼盼; 李佳酿

    2015-01-01

    文章从甘肃陇东长庆油田污染严重的土壤中分离筛选得到六株石油烃降解菌,分别命名为a1、a2、a3、a4、a5和a6,对它们进行了常规鉴定,得到a1、a2、a3均为芽孢杆菌,a4、a6均为假单胞菌,a5为不动杆菌.通过菌剂的复活、发酵得到降解石油烃复合菌,并进行了微生物修复含油污泥的小试实验.结果表明,当土壤中的石油含量为50g/kg时,加入混合菌剂的石油降解率比没有加菌剂的降解效率高,添加4%菌剂后81d的降解率为90.20%,大于对照组(只添加有机肥)的降解率31.10%,说明该混合菌剂具有应用于实际石油污染土壤生物修复的潜力.%The isolation of six strains of petroleum degrading bacteria from contaminated Gansu Longdong Changqing Oilfield serious soil, which were named as A1, A2, A3, A4, A5 and A6 were carried out routine identification, A1, A2 and A3 were bacillus, A4, A6 were Pseudomonas A5, acinetobacter. Get the degradation of petroleum hydrocarbon compound bacteria through fermentation, resurrection, and carried out experiments of microbial remediation of oily sludge. The results show that when the oil content in soil was 50g/kg, adding oil degrading mixed inoculum rate than the degradation efficiency without inoculum, adding 4% agent 81D degradation rate was 90.20% higher than that of control group (add organic fertilizer) the degradation rate of 31.10%, indicating that the mixed bacteria agent is applied to the actual oil the potential for bioremediation of contaminated soil.

  20. Antikaon condensation in neutron stars

    CERN Document Server

    Pal, S; Greiner, W

    2000-01-01

    We investigate the condensation of charged K sup - meson and neutral anti-K sup 0 meson in dense neutron star matter. Calculations are performed in relativistic mean field models in which both the baryon-baryon and (anti)kaon-baryon interactions are mediated by meson exchange. It is found that anti-K sup 0 condensation is quite sensitive to the antikaon optical potential and depends more strongly on the nucleonic equation of state. For moderate values of antikaon potential and a rather stiff equation of state, a significant region of maximum mass star will contain anti-K sup 0 meson. The critical density of anti-K sup 0 condensation is always higher than that of K sup - condensation. With the appearance of K sup - and anti-K sup 0 condensates, pairs of p-K sup - and n-Kbar sup 0 are produced with equal proportion leading to a perfectly symmetric matter of nucleons and antikaons in neutron stars. Along with K sup - condensate, anti-K sup 0 condensate makes the equation of state much softer resulting in smaller...

  1. Strange Baryonic Matter and Kaon Condensation

    Science.gov (United States)

    Gazda, D.; Friedman, E.; Gal, A.; Mareš, J.

    In this contribution we address the question whether kaon condensation could occur in strongly interacting self-bound strange hadronic matter. In our comprehensive dynamical relativistic mean-field (RMF) calculations of nuclear and hypernuclear systems containing several antikaons we found saturation of bar K separation energy as well as the associated nuclear and bar K density distributions upon increasing the number of bar K mesons. The saturation pattern was found to be a universal feature of these multi-strangeness configurations. Since in all cases the bar K separation energy does not exceed 200 MeV, we conclude that bar K mesons do not provide the physical "strangeness" degrees of freedom for self-bound strange hadronic matter.

  2. Efficient, Long-Life Biocidal Condenser Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Environmental control systems for manned lunar and planetary bases will require condensing heat exchangers to control humidity. Condensing surfaces must be...

  3. Efficient, Long-Life Biocidal Condenser Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Environmental control systems for manned lunar and planetary bases will require condensing heat exchangers to control humidity in manned modules. Condensing surfaces...

  4. Bose condensation in (random traps

    Directory of Open Access Journals (Sweden)

    V.A. Zagrebnov

    2009-01-01

    Full Text Available We study a non-interacting (perfect Bose-gas in random external potentials (traps. It is shown that a generalized Bose-Einstein condensation in the random eigenstates manifests if and only if the same occurs in the one-particle kinetic-energy eigenstates, which corresponds to the generalized condensation of the free Bose-gas. Moreover, we prove that the amounts of both condensate densities are equal. This statement is relevant for justification of the Bogoliubov approximation} in the theory of disordered boson systems.

  5. Cool Sooting Flames of Hydrocarbons

    Institute of Scientific and Technical Information of China (English)

    Z.A. MANSUROV

    2001-01-01

    This paper presents the study of polycyclic aromatic hydrocarbons (PAH) and paramagnetism of soot particles sampled from cool sooting flames of methane and propane in a separately-heated two-sectional reactor under atmospheric pressure at the reactor temperatures of 670-1170 K. The temperature profiles of the flames were studied. The sampling was carried out with a quartz sampler and the samples were frozen with liquid nitrogen. A number of polyaromatic hydrocarbons such as pyrene, fluoranthene, coronene, anthanthrene, 1,12-benzperylene,were identified by spectroscopic methods in the extract of soot. The processes of soot formation at methaneoxygen mixture combustion in the electric field with applied potential changed from 0 to 2,2 kV at different polarity of electrodes have been investigated. It has been stated that at the electrical field application, an increase in soot particle sizes and soot yield occurs; besides, at the application of the field, speeding up the positively charged particles, the interplanar distance decreases. On the basis of investigation of soot particles paramagnetism, it was shown that initially soot particles have high carcinogetic activity and pollute the environment owing to a rapid decrease of the number of these radical centers. The reduction of the radical concentration is connected with radical recombination on soot.

  6. Electric-field-enhanced condensation on superhydrophobic nanostructured surfaces.

    Science.gov (United States)

    Miljkovic, Nenad; Preston, Daniel J; Enright, Ryan; Wang, Evelyn N

    2013-12-23

    When condensed droplets coalesce on a superhydrophobic nanostructured surface, the resulting droplet can jump due to the conversion of excess surface energy into kinetic energy. This phenomenon has been shown to enhance condensation heat transfer by up to 30% compared to state-of-the-art dropwise condensing surfaces. However, after the droplets jump away from the surface, the existence of the vapor flow toward the condensing surface increases the drag on the jumping droplets, which can lead to complete droplet reversal and return to the surface. This effect limits the possible heat transfer enhancement because larger droplets form upon droplet return to the surface, which impedes heat transfer until they can be either removed by jumping again or finally shedding via gravity. By characterizing individual droplet trajectories during condensation on superhydrophobic nanostructured copper oxide (CuO) surfaces, we show that this vapor flow entrainment dominates droplet motion for droplets smaller than R ≈ 30 μm at moderate heat fluxes (q″ > 2 W/cm(2)). Subsequently, we demonstrate electric-field-enhanced condensation, whereby an externally applied electric field prevents jumping droplet return. This concept leverages our recent insight that these droplets gain a net positive charge due to charge separation of the electric double layer at the hydrophobic coating. As a result, with scalable superhydrophobic CuO surfaces, we experimentally demonstrated a 50% higher overall condensation heat transfer coefficient compared to that on a jumping-droplet surface with no applied field for low supersaturations (condensation heat transfer enhancement but also offers avenues for improving the performance of self-cleaning and anti-icing surfaces as well as thermal diodes.

  7. Nonequilibrium Thermodynamics of Wealth Condensation

    CERN Document Server

    Braun, D

    2006-01-01

    We analyze wealth condensation for a wide class of stochastic economy models on the basis of the economic analog of thermodynamic potentials, termed transfer potentials. The economy model is based on three common transfers modes of wealth: random transfer, profit proportional to wealth and motivation of poor agents to work harder. The economies never reach steady state. Wealth condensation is the result of stochastic tunneling through a metastable transfer potential. In accordance with reality, both wealth and income distribution transiently show Pareto tails for high income subjects. For metastable transfer potentials, exponential wealth condensation is a robust feature. For example with 10 % annual profit 1% of the population owns 50 % of the wealth after 50 years. The time to reach such a strong wealth condensation is a hyperbolic function of the annual profit rate.

  8. Solar engineering - a condensed course

    Energy Technology Data Exchange (ETDEWEB)

    Broman, Lars

    2011-11-15

    The document represents the material covered in a condensed two-week course focusing on the most important thermal and PV solar energy engineering topics, while also providing some theoretical background.

  9. Nuclear fusion inside condense matters

    Institute of Scientific and Technical Information of China (English)

    HE Jing-tang

    2007-01-01

    This article describes in detail the nuclear fusion inside condense matters--the Fleischmann-Pons effect, the reproducibility of cold fusions, self-consistentcy of cold fusions and the possible applications.

  10. Condensate's prospects boosted by shortage of light crude

    Energy Technology Data Exchange (ETDEWEB)

    Anon

    2005-11-15

    Rapidly rising demand for light, low sulphur refined products such as gasoline and diesel is causing refiners to take an increasing interest in condensate. Condensate is principally a by-product of natural gas production and has long been seen as an awkward product to extract and market. It has to be separated from the gas as well as being sold and marketed separately. It sometimes requires specialist storage and handling in order to maintain it in a liquid state. (author)

  11. A Robust, Gravity-Insensitive, High-Temperature Condenser for Water Recovery

    Science.gov (United States)

    Chen, Weibo; Conboy, Thomas; Ewert, Michael

    2016-01-01

    Regenerative life support systems are vital for NASA's future long-duration human space exploration missions. A Heat Melt Compactor (HMC) system is being developed by NASA to dry and compress trash generated during space missions. The resulting water vapor is recovered and separated from the process gas flow by a gravity-insensitive condenser. Creare is developing a high-temperature condenser for this application. The entire condenser is constructed from metals that have excellent resistance to chemical attack from contaminants and is suitable for high-temperature operation. The metal construction and design configuration also offer greatest flexibility for potential coating and regeneration processes to reduce biofilm growth and thus enhancing the reliability of the condenser. The proposed condenser builds on the gravity-insensitive phase separator technology Creare developed for aircraft and spacecraft applications. This paper will first discuss the design requirements for the condenser in an HMC system that will be demonstrated on the International Space Station (ISS). Then, it will present the overall design of the condenser and the preliminary thermal test results of a subscale condenser. Finally, this paper will discuss the predicted performance of the full-size condenser and the development plan to mature the technology and enhance its long-term reliability for a flight system.

  12. Microbial production of aliphatic hydrocarbons. Progress report, February 1, 1979-September 30, 1979. [Optimization for commercial oily hydrocarbon production

    Energy Technology Data Exchange (ETDEWEB)

    Tornabene, T G

    1979-09-01

    The neutral lipids of nine species of methanogenic bacteria, two thermoacidophiles, two alkalinophiles and 20 algal samples were analyzed. The major components were C/sub 30/, C/sub 25/, and/or C/sub 20/ acyclic isoprenoid hydrocarbons with a continuous range of hydroisoprenoid homologues. The range or acyclic isoprenoids detected were from C/sub 14/ to C/sub 30/. The neutral lipid composition from these bacteria resembles the isoprenoid distribution isolated from ancient sediments and petroleum. Therefore, these findings may have major implications to biological and biogeochemical evolution. In this connection, samples and cores from ancient sediments and future fossil fuel source beds are being analyzed for these neutral lipids as well as the more polar isopranyl glycerol-ether lipids. The derivation of fossil fuels and the biomass accumulations are the focal points of this phase of the study. Ancient and recent sediments, future source beds, and local esturaries are being enriched for microorganisms to establish a range and capability profile for hydrocarbon production. Only a relatively small percent of the microorganisms isolated demonstrated the ability to synthesize hydrocarbons; however, one particular algal isolate demonstrated that it can synthesize hydrocarbons while in a green physiological stage. Greater production is expected in the brown phase of growth. Hydrocarbon biosynthesis studies were conducted in an attempt to better understand the conditions required to maximize hydrocarbon production. The program involved physical and chemical parameters as well as assays of specifically labelled precusors with a cell free enzyme system to measure their conversions to hydrocarbons. The results have indicated a complex one enzyme system is involved in condensation and reduction of two fatty acids into hydrocarbons.

  13. On Multistep Bose-Einstein Condensation in Anisotropic Traps

    CERN Document Server

    Shiokawa, K

    2000-01-01

    Multistep Bose-Einstein condensation of an ideal Bose gas in anisotropic harmonic atom traps is studied. In the presence of strong anisotropy realized by the different trap frequency in each direction, finite size effect dictates a series of dimensional crossovers into lower-dimensional excitations. Two-step condensation and the dynamical reduction of the effective dimension can appear in three separate steps. When the multistep behavior occurs, the occupation number of atoms excited in each dimension is shown to behave similarly as a function of the temperature.

  14. A Xenon Condenser with a Remote Liquid Storage Vessel

    CERN Document Server

    Slutsky, S; Breuer, H; Dobi, A; Hall, C; Langford, T; Leonard, D; Kaufman, L J; Strickland, V; Voskanian, N

    2009-01-01

    We describe the design and operation of a system for xenon liquefaction in which the condenser is separated from the liquid storage vessel. The condenser is cooled by a pulse tube cryocooler, while the vessel is cooled only by the liquid xenon itself. This arrangement facilitates liquid particle detector research by allowing easy access to the upper and lower flanges of the vessel. We find that an external xenon gas pump is useful for increasing the rate at which cooling power is delivered to the vessel, and we present measurements of the power and efficiency of the apparatus.

  15. Mixed Ionic and Electonic Conductors for Hydrogen Generation and Separation: A New Approach

    Energy Technology Data Exchange (ETDEWEB)

    Srikanth Gopalan

    2006-12-31

    Composite mixed conductors comprising one electronic conducting phase, and one ionic conducting phase (MIECs) have been developed in this work. Such MIECs have applications in generating and separating hydrogen from hydrocarbon fuels at high process rates and high purities. The ionic conducting phase comprises of rare-earth doped ceria and the electronic conducting phase of rare-earth doped strontium titanate. These compositions are ideally suited for the hydrogen separation application. In the process studied in this project, steam at high temperatures is fed to one side of the MIEC membrane and hydrocarbon fuel or reformed hydrocarbon fuel to the other side of the membrane. Oxygen is transported from the steam side to the fuel side down the electrochemical potential gradient thereby enriching the steam side flow in hydrogen. The remnant water vapor can then be condensed to obtain high purity hydrogen. In this work we have shown that two-phase MIECs comprising rare-earth ceria as the ionic conductor and doped-strontium titanate as the electronic conductor are stable in the operating environment of the MIEC. Further, no adverse reaction products are formed when these phases are in contact at elevated temperatures. The composite MIECs have been characterized using a transient electrical conductivity relaxation technique to measure the oxygen chemical diffusivity and the surface exchange coefficient. Oxygen permeation and hydrogen generation rates have been measured under a range of process conditions and the results have been fit to a model which incorporates the oxygen chemical diffusivity and the surface exchange coefficient from the transient measurements.

  16. Class separation of lipids and polycyclic aromatic hydrocarbons in normal phase high performance liquid chromatography - a prospect for analysis of aromatics in edible vegetable oils and biodiesel exhaust particulates.

    Science.gov (United States)

    Olsson, Petter; Sadiktsis, Ioannis; Holmbäck, Jan; Westerholm, Roger

    2014-09-19

    The retention characteristics of the major lipid components in biodiesels and edible oils as well as representative polycyclic aromatic compounds (PAHs) have been investigated on five different normal phase HPLC stationary phases, in order to optimize class separation for an automatized online HPLC cleanup of PAHs prior GC-MS analysis. By stepwise comparison of different hexane/MTBE compositions as mobile phases on cyano-, phenyl-, pentabromobenzyl-, nitrophenyl- and amino-modified silica columns, the capacity and selectivity factors for each analyte and column could be calculated. It was concluded that the most suitable column for backflush isolation of PAHs in biodiesel and edible oil matrices was the pentabromobenzyl-modified silica (PBB). A previously described online HPLC-GC-MS system using the PBB column was then evaluated by qualitative and quantitative analysis of a biodiesel exhaust particulate extract and a vegetable oil reference material. The GC-MS full scan analysis of the biodiesel particulate extract showed that the lipids had been removed from the sample and a fraction containing PAHs and oxygenated derivatives thereof had been isolated. Quantified mass fractions of PAHs of the reference material BCR-458 agreed well for most of the certified PAH mass fractions in the spiked coconut oil reference material.

  17. Effect of retrograde gas condensate in low permeability natural gas reservoir; Efeito da condensacao retrograda em reservatorios de gas natural com baixa permeabilidade

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Paulo Lee K.C. [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Faculdade de Engenharia Mecanica; Ligero, Eliana L.; Schiozer, Denis J. [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Faculdade de Engenharia Mecanica. Dept. de Engenharia de Petroleo

    2008-07-01

    Most of Brazilian gas fields are low-permeability or tight sandstone reservoirs and some of them should be gas condensate reservoir. In this type of natural gas reservoir, part of the gaseous hydrocarbon mixture is condensate and the liquid hydrocarbon accumulates near the well bore that causes the loss of productivity. The liquid hydrocarbon formation inside the reservoir should be well understood such as the knowledge of the variables that causes the condensate formation and its importance in the natural gas production. This work had as goal to better understanding the effect of condensate accumulation near a producer well. The influence of the porosity and the absolute permeability in the gas production was studied in three distinct gas reservoirs: a dry gas reservoir and two gas condensate reservoirs. The refinement of the simulation grid near the producer well was also investigated. The choice of simulation model was shown to be very important in the simulation of gas condensate reservoirs. The porosity was the little relevance in the gas production and in the liquid hydrocarbon formation; otherwise the permeability was very relevant. (author)

  18. Condenser Optimization in Steam Power Plant

    Institute of Scientific and Technical Information of China (English)

    Sukru Bekdemir; Recep Ozturk; Zehra Yumurtac

    2003-01-01

    In this paper the effects of the condenser design parameters (such as turbine inlet condition, turbine power and condenser pressure) on heat transfer area, cooling water flow-rate, condenser cost and specific energy generation cost are studied for surface type condenser.The results are given in the text and also shown as diagrams.

  19. Rapid Drop Dynamics During Superhydrophobic Condensation

    Science.gov (United States)

    Zhang, Xiaodong; Boreyko, Jonathan; Chen, Chuan-Hua

    2008-11-01

    Rapid drop motion is observed on superhydrophobic surfaces during condensation; condensate drops with diameter of order 10 μm can move at above 100G and 0.1 m/s. When water vapor condenses on a horizontal superhydrophobic surface, condensate drops move in a seemingly random direction. The observed motion is attributed to the energy released through coalescence of neighboring condensate drops. A scaling analysis captured the initial acceleration and terminal velocity. Our work is a step forward in understanding the dynamics of superhydrophobic condensation occurring in both natural water-repellant plants and engineered dropwise condensers.

  20. Quantitative Hydrocarbon Surface Analysis

    Science.gov (United States)

    Douglas, Vonnie M.

    2000-01-01

    The elimination of ozone depleting substances, such as carbon tetrachloride, has resulted in the use of new analytical techniques for cleanliness verification and contamination sampling. The last remaining application at Rocketdyne which required a replacement technique was the quantitative analysis of hydrocarbons by infrared spectrometry. This application, which previously utilized carbon tetrachloride, was successfully modified using the SOC-400, a compact portable FTIR manufactured by Surface Optics Corporation. This instrument can quantitatively measure and identify hydrocarbons from solvent flush of hardware as well as directly analyze the surface of metallic components without the use of ozone depleting chemicals. Several sampling accessories are utilized to perform analysis for various applications.

  1. Miscellaneous hydrocarbon solvents.

    Science.gov (United States)

    Bebarta, Vikhyat; DeWitt, Christopher

    2004-08-01

    The solvents discussed in this article are common solvents not categorized as halogenated, aromatic, or botanical. The solvents discussed are categorized into two groups: hydrocarbon mixtures and single agents. The hydrocarbon mixtures discussed are Stoddard solvent, naphtha, and kerosene. The remaining solvents described are n-hexane, methyl n-butyl ketone, dimethylformamide, dimethyl sulfoxide, and butyl mercaptans. Effects common to this group of agents and their unique effects are characterized. Treatment of exposures and toxic effects of these solvents is described, and physiochemical properties and occupational exposure levels are listed.

  2. Noble gas and hydrocarbon tracers in multiphase unconventional hydrocarbon systems: Toward integrated advanced reservoir simulators

    Science.gov (United States)

    Darrah, T.; Moortgat, J.; Poreda, R. J.; Muehlenbachs, K.; Whyte, C. J.

    2015-12-01

    Although hydrocarbon production from unconventional energy resources has increased dramatically in the last decade, total unconventional oil and gas recovery from black shales is still less than 25% and 9% of the totals in place, respectively. Further, the majority of increased hydrocarbon production results from increasing the lengths of laterals, the number of hydraulic fracturing stages, and the volume of consumptive water usage. These strategies all reduce the economic efficiency of hydrocarbon extraction. The poor recovery statistics result from an insufficient understanding of some of the key physical processes in complex, organic-rich, low porosity formations (e.g., phase behavior, fluid-rock interactions, and flow mechanisms at nano-scale confinement and the role of natural fractures and faults as conduits for flow). Noble gases and other hydrocarbon tracers are capably of recording subsurface fluid-rock interactions on a variety of geological scales (micro-, meso-, to macro-scale) and provide analogs for the movement of hydrocarbons in the subsurface. As such geochemical data enrich the input for the numerical modeling of multi-phase (e.g., oil, gas, and brine) fluid flow in highly heterogeneous, low permeability formations Herein we will present a combination of noble gas (He, Ne, Ar, Kr, and Xe abundances and isotope ratios) and molecular and isotopic hydrocarbon data from a geographically and geologically diverse set of unconventional hydrocarbon reservoirs in North America. Specifically, we will include data from the Marcellus, Utica, Barnett, Eagle Ford, formations and the Illinois basin. Our presentation will include geochemical and geological interpretation and our perspective on the first steps toward building an advanced reservoir simulator for tracer transport in multicomponent multiphase compositional flow (presented separately, in Moortgat et al., 2015).

  3. Integrated vacuum absorption steam cycle gas separation

    Science.gov (United States)

    Chen, Shiaguo; Lu, Yonggi; Rostam-Abadi, Massoud

    2011-11-22

    Methods and systems for separating a targeted gas from a gas stream emitted from a power plant. The gas stream is brought into contact with an absorption solution to preferentially absorb the targeted gas to be separated from the gas stream so that an absorbed gas is present within the absorption solution. This provides a gas-rich solution, which is introduced into a stripper. Low pressure exhaust steam from a low pressure steam turbine of the power plant is injected into the stripper with the gas-rich solution. The absorbed gas from the gas-rich solution is stripped in the stripper using the injected low pressure steam to provide a gas stream containing the targeted gas. The stripper is at or near vacuum. Water vapor in a gas stream from the stripper is condensed in a condenser operating at a pressure lower than the stripper to concentrate the targeted gas. Condensed water is separated from the concentrated targeted gas.

  4. Task 8: Evaluation of hydrocarbon potential

    Energy Technology Data Exchange (ETDEWEB)

    Cashman, P.H.; Trexler, J.H. Jr.

    1994-12-31

    Our studies focus on the stratigraphy of Late Devonian to early Pennsylvanian rocks at the NTS, because these are the best potential hydrocarbon source rocks in the vicinity of Yucca Mountain. In the last year, our stratigraphic studies have broadened to include the regional context for both the Chainman and the Eleana formations. New age data based on biostratigraphy constrain the age ranges of both Chainman and Eleana; accurate and reliable ages are essential for regional correlation and for regional paleogeographic reconstructions. Source rock analyses throughout the Chainman establish whether these rocks contained adequate organic material to generate hydrocarbons. Maturation analyses of samples from the Chainman determine whether the temperature history has been suitable for the generation of liquid hydrocarbons. Structural studies are aimed at defining the deformation histories and present position of the different packages of Devonian - Pennsylvanian rocks. This report summarizes new results of our structural, stratigraphic and hydrocarbon source rock potential studies at the Nevada Test Site and vicinity. Stratigraphy is considered first, with the Chainman Shale and Eleana Formation discussed separately. New biostratigraphic results are included in this section. New results from our structural studies are summarized next, followed by source rock and maturation analyses of the Chainman Shale. Directions for future work are included where appropriate.

  5. UTILIZATION OF AQUEOUS-TAR CONDENSATES FORMED DURING GASIFICATION

    Directory of Open Access Journals (Sweden)

    Anna Kwiecińska

    2016-11-01

    Full Text Available Gasification of solid fuels is an alternative process for energy production using conventional and renewable fuels. Apart from desired compounds, i.e. carbon oxide, hydrogen and methane, the produced gas contains complex organic (tars and inorganic (carbonizate, ammonia contaminants. Those substances, together with water vapor, condensate during cooling of the process gas, what results in the formation of aqueous-tar condensate, which requires proper methods of utilization. The management of this stream is crucial for commercialization and application of the gasification technology. In the paper the treatment of aqueous-tar condensates formed during biomass gasification process is discussed. The removal of tars from the stream was based on their spontaneous separation. The aqueous stream was subjected to ultrafiltration operated at different pressures. Such a treatment configuration enabled to obtain highly concentrated retentate, which could be recycled to the gasifier, and filtrate, which could be subjected to further treatment.

  6. Microwave plasma torch for processing hydrocarbon gases

    Directory of Open Access Journals (Sweden)

    Alex G. Zherlitsyn

    2016-03-01

    Full Text Available We designed and developed an ultrahigh-frequency (microwave plasma torch with a combined (nitrogen, methane plasma-forming environment, and microwave output of up to 2 kW, continuously. We demonstrate the possibility of using it in order to process natural and associated petroleum (APG gas into valuable products (hydrogen and carbon nanomaterial CNM with up to 70% efficiency. Based on the developed microwave plasma torch, we developed an apparatus capable of converting hydrocarbon feedstock at a capacity of 50 g/h yielding CNM and hydrogen of up to 70 vol. %. In its mobile small-tonnage version, this technology can be used on gas-condensate fields.

  7. Research progress of control of condensate depression for condenser

    Science.gov (United States)

    Liu, Ying; Liang, Run; Li, Fengyu

    2017-08-01

    It is introduced that significance and structure of the condensate depression control system. In accordance with controller devised procedure, we analyze and elaborate how to construct the lumped parameter and dynamic mathematical model which possesses distinct physics significance. Neural network model being called black-box model is also introduced. We analyze and contrast the control technique of condensate depression as conventional PI control, fuzzy PI control and fuzzy control. It is indicated that if the controller of condensate depression were devised inappropriate, while the steam discharged of turbine varying by a large margin, would result in the rotation rate of cooling water circulating pump accelerating at a great lick even to trigger the galloping danger which is less impressive for the units operating safely.

  8. Mass transfer and adsorption equilibrium study in MFI zeolites: application to the separation of mono and di-branched hydrocarbons in silicalite; Etude et modelisation de l'adsorption et du transfert de matiere dans les zeolithes de structure MFI. Application a la separation des hydrocarbures satures mono et di-branches

    Energy Technology Data Exchange (ETDEWEB)

    Jolimaitre, E.

    1999-11-30

    The aim of this study was to develop a model representing the breakthrough of hydrocarbon mixtures in fixed bed, and to estimate the parameters of this model. Equilibrium isotherms and effective diffusivities of 3-methyl-pentane, isopentane and 2,2-dimethyl-butane in silicalite were measured between 150 and 300 deg. C and for different concentrations, with a linear chromatography technique. Parameter estimation was made by mean of a linear model developed for this work, on which a parameter identifiability study was made. The method used for the parameter identifiability study can be applied to any linear fixed bed model. Experimental single component and mixtures breakthrough curves of 2-methyl-pentane, isopentane and 2,2-dimethyl-butane were then realized at 200 deg. C. Adsorption isotherms and self diffusivities were estimated from single-component curves, using a non linear model of the bed. The non-linear model was also developed and validated during this work. These parameters were injected into the non-linear model to simulate the experimental mixture breakthrough curves. Influence of the velocity variation in the bed and of the diffusion driving-force (Maxwell-Stefan or Fick theory) was studied. Most of the experimental breakthrough curves are correctly predicted by the model, expect for the isopentane-2,2-dimethyl-butane mixture, for which predicted breakthrough time is inferior to experimental values. (author)

  9. Mass transfer and adsorption equilibrium study in MFI zeolites: application to the separation of mono and di-branched hydrocarbons in silicalite; Etude et modelisation de l'adsorption et du transfert de matiere dans les zeolithes de structure MFI. Application a la separation des hydrocarbures satures mono et di-branches

    Energy Technology Data Exchange (ETDEWEB)

    Jolimaitre, E.

    1999-11-30

    The aim of this study was to develop a model representing the breakthrough of hydrocarbon mixtures in fixed bed, and to estimate the parameters of this model. Equilibrium isotherms and effective diffusivities of 3-methyl-pentane, isopentane and 2,2-dimethyl-butane in silicalite were measured between 150 and 300 deg. C and for different concentrations, with a linear chromatography technique. Parameter estimation was made by mean of a linear model developed for this work, on which a parameter identifiability study was made. The method used for the parameter identifiability study can be applied to any linear fixed bed model. Experimental single component and mixtures breakthrough curves of 2-methyl-pentane, isopentane and 2,2-dimethyl-butane were then realized at 200 deg. C. Adsorption isotherms and self diffusivities were estimated from single-component curves, using a non linear model of the bed. The non-linear model was also developed and validated during this work. These parameters were injected into the non-linear model to simulate the experimental mixture breakthrough curves. Influence of the velocity variation in the bed and of the diffusion driving-force (Maxwell-Stefan or Fick theory) was studied. Most of the experimental breakthrough curves are correctly predicted by the model, expect for the isopentane-2,2-dimethyl-butane mixture, for which predicted breakthrough time is inferior to experimental values. (author)

  10. Primes, Geometry and Condensed Matter

    Directory of Open Access Journals (Sweden)

    Al Rabeh R. H.

    2009-07-01

    Full Text Available Fascination with primes dates back to the Greeks and before. Primes are named by some "the elementary particles of arithmetic" as every nonprime integer is made of a unique set of primes. In this article we point to new connections between primes, geometry and physics which show that primes could be called "the elementary particles of physics" too. This study considers the problem of closely packing similar circles/spheres in 2D/3D space. This is in effect a discretization process of space and the allowable number in a pack is found to lead to some unexpected cases of prime configurations which is independent of the size of the constituents. We next suggest that a non-prime can be considered geometrically as a symmetric collection that is separable (factorable into similar parts- six is two threes or three twos for example. A collection that has no such symmetry is a prime. As a result, a physical prime aggregate is more difficult to split symmetrically resulting in an inherent stability. This "number/physical" stability idea applies to bigger collections made from smaller (prime units leading to larger stable prime structures in a limitless scaling up process. The distribution of primes among numbers can be understood better using the packing ideas described here and we further suggest that differing numbers (and values of distinct prime factors making a nonprime collection is an important factor in determining the probability and method of possible and subsequent disintegration. Disintegration is bound by energy conservation and is closely related to symmetry by Noether theorems. Thinking of condensed matter as the packing of identical elements, we examine plots of the masses of chemical elements of the periodic table, and also those of the elementary particles of physics, and show that prime packing rules seem to play a role in the make up of matter. The plots show convincingly that the growth of prime numbers and that of the masses of

  11. Primes, Geometry and Condensed Matter

    Directory of Open Access Journals (Sweden)

    Al Rabeh R. H.

    2009-07-01

    Full Text Available Fascination with primes dates back to the Greeks and before. Primes are named by some “the elementary particles of arithmetic” as every nonprime integer is made of a unique set of primes. In this article we point to new connections between primes, geometry and physics which show that primes could be called “the elementary particles of physics” too. This study considers the problem of closely packing similar circles / spheres in 2D / 3D space. This is in effect a discretization process of space and the allowable num- ber in a pack is found to lead to some unexpected cases of prime configurations which is independent of the size of the constituents. We next suggest that a non-prime can be considered geometrically as a symmetric collection that is separable (factorable into similar parts- six is two threes or three twos for example. A collection that has no such symmetry is a prime. As a result, a physical prime aggregate is more difficult to split symmetrically resulting in an inherent stability. This “number / physical” stability idea applies to bigger collections made from smaller (prime units leading to larger sta- ble prime structures in a limitless scaling up process. The distribution of primes among numbers can be understood better using the packing ideas described here and we further suggest that differing numbers (and values of distinct prime factors making a nonprime collection is an important factor in determining the probability and method of possible and subsequent disintegration. Disintegration is bound by energy conservation and is closely related to symmetry by Noether theorems. Thinking of condensed matter as the packing of identical elements, we examine plots of the masses of chemical elements of the periodic table, and also those of the elementary particles of physics, and show that prime packing rules seem to play a role in the make up of matter. The plots show con- vincingly that the growth of prime numbers and that

  12. Scrutinizing the pion condensed phase

    CERN Document Server

    Carignano, Stefano; Mammarella, Andrea; Mannarelli, Massimo; Pagliaroli, Giulia

    2016-01-01

    When the isospin chemical potential exceeds the pion mass, charged pions condense in the zero-momentum state forming a superfluid. Chiral perturbation theory provides a very powerful tool for studying this phase. However, the formalism that is usually employed in this context does not clarify various aspects of the condensation mechanism and makes the identification of the soft modes problematic. We re-examine the pion condensed phase using different approaches within the chiral perturbation theory framework. As a first step, we perform a low-density expansion of the chiral Lagrangian valid in the normal phase and close to the onset of the Bose-Einstein condensation. We obtain an effective theory that can be mapped to a Gross-Pitaevskii Lagrangian in which, remarkably, all the coefficients depend on the isospin chemical potential. The low-density expansion becomes unreliable deep in the pion condensed phase. For this reason, we develop an alternative field expansion deriving a low-energy Lagrangian analog to ...

  13. Polariton condensates at room temperature

    Science.gov (United States)

    Guillet, Thierry; Brimont, Christelle

    2016-10-01

    We review the recent developments of the polariton physics in microcavities featuring the exciton-photon strong coupling at room temperature, and leading to the achievement of room-temperature polariton condensates. Such cavities embed active layers with robust excitons that present a large binding energy and a large oscillator strength, i.e. wide bandgap inorganic or organic semiconductors, or organic molecules. These various systems are compared, in terms of figures of merit and of common features related to their strong oscillator strength. The various demonstrations of polariton laser are compared, as well as their condensation phase diagrams. The room-temperature operation indeed allows a detailed investigation of the thermodynamic and out-of-equilibrium regimes of the condensation process. The crucial role of the spatial dynamics of the condensate formation is discussed, as well as the debated issue of the mechanism of stimulated relaxation from the reservoir to the condensate under non-resonant excitation. Finally the prospects of polariton devices are presented.

  14. Apparatus and methods for hydrocarbon extraction

    Science.gov (United States)

    Bohnert, George W.; Verhulst, Galen G.

    2016-04-26

    Systems and methods for hydrocarbon extraction from hydrocarbon-containing material. Such systems and methods relate to extracting hydrocarbon from hydrocarbon-containing material employing a non-aqueous extractant. Additionally, such systems and methods relate to recovering and reusing non-aqueous extractant employed for extracting hydrocarbon from hydrocarbon-containing material.

  15. Optrode for sensing hydrocarbons

    Science.gov (United States)

    Miller, Holly; Milanovich, Fred P.; Hirschfeld, Tomas B.; Miller, Fred S.

    1987-01-01

    A two-phase system employing the Fujiwara reaction is provided for the fluorometric detection of halogenated hydrocarbons. A fiber optic is utilized to illuminate a column of pyridine trapped in a capillary tube coaxially attached at one end to the illuminating end of the fiber optic. A strongly alkaline condition necessary for the reaction is maintained by providing a reservoir of alkali in contact with the column of pyridine, the surface of contact being adjacent to the illuminating end of the fiber optic. A semipermeable membrane caps the other end of the capillary tube, the membrane being preferentially permeable to the halogenated hydrocarbon and but preferentially impermeable to water and pyridine. As the halogenated hydrocarbon diffuses through the membrane and into the column of pyridine, fluorescent reaction products are formed. Light propagated by the fiber optic from a light source, excites the fluorescent products. Light from the fluorescence emission is also collected by the same fiber optic and transmitted to a detector. The intensity of the fluorescence gives a measure of the concentration of the halogenated hydrocarbons.

  16. Harvesting liquid from unsaturated vapor - nanoflows induced by capillary condensation

    Science.gov (United States)

    Vincent, Olivier; Marguet, Bastien; Stroock, Abraham

    2016-11-01

    A vapor, even subsaturated, can spontaneously form liquid in nanoscale spaces. This process, known as capillary condensation, plays a fundamental role in various contexts, such as the formation of clouds or the dynamics of hydrocarbons in the geological subsurface. However, large uncertainties remain on the thermodynamics and fluid mechanics of the phenomenon, due to experimental challenges as well as outstanding questions about the validity of macroscale physics at the nanometer scale. We studied experimentally the spatio-temporal dynamics of water condensation in a model nanoporous medium (pore radius 2 nm), taking advantage of the color change of the material upon hydration. We found that at low relative humidities (diffusive fashion, while it occurred through a well-defined capillary-viscous imbibition front at > 60 % RH, driven by a balance between the pore capillary pressure and the condensation stress given by Kelvin equation. Further analyzing the imbibition dynamics as a function of saturation allowed us to extract detailed information about the physics of nano-confined fluids. Our results suggest excellent extension of macroscale fluid dynamics and thermodynamics even in pores 10 molecules in diameter.

  17. High-resolution gas chromatographic analysis of polycyclic aromatic hydrocarbons and aliphatic hydrocarbons; Separacion por cromatografia de gases de alta eficiencia de hidrocarburos aromaticos policiclicos, (PAH) y alifaticos (AH) ambientales, empleado como fases estacionarias OV-1 y SE-54

    Energy Technology Data Exchange (ETDEWEB)

    Perez, M.; Gonzalez, D.

    1988-07-01

    A study of the analysis by gas chromatography of aromatic polycyclic hydrocarbons and aliphatic hydrocarbons is presented. The separation has been carried out by glass and fused silica capillary column in two different polar stationary phases OV-1 and SE-54. The limitation and the advantages of the procedure are discussed in terms of separation, sensitivity and precision. (Author) 20 refs.

  18. Miniaturization of Separation Systems and Its Applications

    Institute of Scientific and Technical Information of China (English)

    Yoshihiro Saito

    2003-01-01

    Development of miniaturized separation system consisted of microscale extraction and liquid phase separation processes has been reviewed.Various types of novel bonded stationary phases have been developed on the basis of the systematic analysis for the retention behavior of polycyclic aromatic hydrocarbons on experimentally synthesized phases. In this review, the miniaturization of microscale sample preparation technique and the effective on-line coupling to microcolumn liquid phase separations are also described especially focusing on the approach by the author's group. The novel use of synthetic polymer filaments as the stationary phase and extraction media in those microscale separation systems will be introduced along with the applications in gas chromatographic separation.

  19. Persistent currents in ferromagnetic condensates

    Science.gov (United States)

    Lamacraft, Austen

    2017-06-01

    Persistent currents in Bose condensates with a scalar order parameter are stabilized by the topology of the order parameter manifold. In condensates with multicomponent order parameters it is topologically possible for supercurrents to "unwind" without leaving the manifold. We study the energetics of this process in the case of ferromagnetic condensates using a long wavelength energy functional that includes both the superfluid and spin stiffnesses. Exploiting analogies to an elastic rod and rigid body motion, we show that the current carrying state in a 1D ring geometry transitions between a spin helix in the energy minima and a solitonlike configuration at the maxima. The relevance to recent experiments in ultracold atoms is briefly discussed.

  20. Mantle hydrocarbons: abiotic or biotic?

    Science.gov (United States)

    Sugisaki, R; Mimura, K

    1994-06-01

    Analyses of 227 rocks from fifty localities throughout the world showed that mantle derived rocks such as tectonized peridotites in ophiolite sequences (tectonites) arid peridotite xenoliths in alkali basalts contain heavier hydrocarbons (n-alkanes), whereas igneous rocks produced by magmas such as gabbro arid granite lack them. The occurrence of hydrocarbons indicates that they were not derived either from laboratory contamination or from held contamination; these compounds found in the mantle-derived rocks are called here "mantle hydrocarbons." The existence of hydrocarbons correlates with petrogenesis. For example, peridotite cumulates produced by magmatic differentiation lack hydrocarbons whereas peridotite xenoliths derived from the mantle contain them. Gas chromatographic-mass spectrometric records of the mantle hydrocarbons resemble those of aliphatics in meteorites and in petroleum. Features of the hydrocarbons are that (a) the mantle hydrocarbons reside mainly along grain boundaries and in fluid inclusions of minerals; (b) heavier isoprenoids such as pristane and phytane are present; and (c) delta 13C of the mantle hydrocarbons is uniform (about -27%). Possible origins for the mantle hydrocarbons are as follows. (1) They were in organically synthesized by Fischer-Tropsch type reaction in the mantle. (2) They were delivered by meteorites and comets to the early Earth. (3) They were recycled by subduction. The mantle hydrocarbons in the cases of (1) and (2) are abiogenic and those in (3) are mainly biogenic. It appears that hydrocarbons may survive high pressures and temperatures in the mantle, but they are decomposed into lighter hydrocarbon gases such as CH4 at lower pressures when magmas intrude into the crust; consequently, peridotite cumulates do not contain heavier hydrocarbons but possess hydrocarbon gases up to C4H10.

  1. Scrutinizing the pion condensed phase

    Energy Technology Data Exchange (ETDEWEB)

    Carignano, Stefano; Mammarella, Andrea; Mannarelli, Massimo [INFN, Laboratori Nazionali del Gran Sasso, Assergi (Italy); Lepori, Luca [Universita di Padova, Dipartimento di Fisica e Astronomia, Padova (Italy); Universita dell' Aquila, Dipartimento di Scienze Fisiche e Chimiche, Coppito-L' Aquila (Italy); Pagliaroli, Giulia [INFN, Laboratori Nazionali del Gran Sasso, Assergi (Italy); Gran Sasso Science Institute, L' Aquila (Italy)

    2017-02-15

    When the isospin chemical potential exceeds the pion mass, charged pions condense in the zero-momentum state forming a superfluid. Chiral perturbation theory provides a very powerful tool for studying this phase. However, the formalism that is usually employed in this context does not clarify various aspects of the condensation mechanism and makes the identification of the soft modes problematic. We re-examine the pion condensed phase using different approaches within the chiral perturbation theory framework. As a first step, we perform a low-density expansion of the chiral Lagrangian valid close to the onset of the Bose-Einstein condensation. We obtain an effective theory that can be mapped to a Gross-Pitaevskii Lagrangian in which, remarkably, all the coefficients depend on the isospin chemical potential. The low-density expansion becomes unreliable deep in the pion condensed phase. For this reason, we develop an alternative field expansion deriving a low-energy Lagrangian analog to that of quantum magnets. By integrating out the ''radial'' fluctuations we obtain a soft Lagrangian in terms of the Nambu-Goldstone bosons arising from the breaking of the pion number symmetry. Finally, we test the robustness of the second-order transition between the normal and the pion condensed phase when next-to-leading-order chiral corrections are included. We determine the range of parameters for turning the second-order phase transition into a first-order one, finding that the currently accepted values of these corrections are unlikely to change the order of the phase transition. (orig.)

  2. On the onset of surface condensation: formation and transition mechanisms of condensation mode

    Science.gov (United States)

    Sheng, Qiang; Sun, Jie; Wang, Qian; Wang, Wen; Wang, Hua Sheng

    2016-08-01

    Molecular dynamics simulations have been carried out to investigate the onset of surface condensation. On surfaces with different wettability, we snapshot different condensation modes (no-condensation, dropwise condensation and filmwise condensation) and quantitatively analyze their characteristics by temporal profiles of surface clusters. Two different types of formation of nanoscale droplets are identified, i.e. the formations with and without film-like condensate. We exhibit the effect of surface tensions on the formations of nanoscale droplets and film. We reveal the formation mechanisms of different condensation modes at nanoscale based on our simulation results and classical nucleation theory, which supplements the ‘classical hypotheses’ of the onset of dropwise condensation. We also reveal the transition mechanism between different condensation modes based on the competition between surface tensions and reveal that dropwise condensation represents the transition states from no-condensation to filmwise condensation.

  3. Turbulent mixing condensation nucleus counter

    Science.gov (United States)

    Mavliev, Rashid

    The construction and operating principles of the Turbulent Mixing Condensation Nucleus Counter (TM CNC) are described. Estimations based on the semiempirical theory of turbulent jets and the classical theory of nucleation and growth show the possibility of detecting particles as small as 2.5 nm without the interference of homogeneous nucleation. This conclusion was confirmed experimentally during the International Workshop on Intercomparison of Condensation Nuclei and Aerosol Particle Counters (Vienna, Austria). Number concentration, measured by the Turbulent Mixing CNC and other participating instruments, is found to be essentially equal.

  4. Condensed Matter Physics - Biology Resonance

    Science.gov (United States)

    Baskaran, G.

    The field of condensed matter physics had its genesis this century and it has had a remarkable evolution. A closer look at its growth reveals a hidden aim in the collective consciousness of the field - a part of the development this century is a kind of warm up exercise to understand the nature of living condensed matter, namely the field of biology, by a growing new breed of scientists in the coming century. Through some examples the vitality of this interaction will be pointed out.

  5. Determination of oxygen and nitrogen derivatives of polycyclic aromatic hydrocarbons in fractions of asphalt mixtures using liquid chromatography coupled to mass spectrometry with atmospheric pressure chemical ionization.

    Science.gov (United States)

    Nascimento, Paulo Cicero; Gobo, Luciana Assis; Bohrer, Denise; Carvalho, Leandro Machado; Cravo, Margareth Coutinho; Leite, Leni Figueiredo Mathias

    2015-12-01

    Liquid chromatography coupled to mass spectrometry with atmospheric pressure chemical ionization was used for the determination of polycyclic aromatic hydrocarbon derivatives, the oxygenated polycyclic aromatic hydrocarbons and nitrated polycyclic aromatic hydrocarbons, formed in asphalt fractions. Two different methods have been developed for the determination of five oxygenated and seven nitrated polycyclic aromatic hydrocarbons that are characterized by having two or more condensed aromatic rings and present mutagenic and carcinogenic properties. The parameters of the atmospheric pressure chemical ionization interface were optimized to obtain the highest possible sensitivity for all compounds. The detection limits of the methods ranged from 0.1 to 57.3 μg/L for nitrated and from 0.1 to 6.6 μg/L for oxygenated derivatives. The limits of quantification were in the range of 4.6-191 μg/L for nitrated and 0.3-8.9 μg/L for oxygenated derivatives. The methods were validated against a diesel particulate extract standard reference material (National Institute of Standards and Technology SRM 1975), and the obtained concentrations (two nitrated derivatives) agreed with the certified values. The methods were applied in the analysis of asphalt samples after their fractionation into asphaltenes and maltenes, according to American Society for Testing and Material D4124, where the maltenic fraction was further separated into its basic, acidic, and neutral parts following the method of Green. Only two nitrated derivatives were found in the asphalt sample, quinoline and 2-nitrofluorene, with concentrations of 9.26 and 2146 mg/kg, respectively, whereas no oxygenated derivatives were detected.

  6. Separation Logic

    DEFF Research Database (Denmark)

    Reynolds, John C.

    2002-01-01

    expressions) for accessing and modifying shared structures, and for explicit allocation and deallocation of storage. Assertions are extended by introducing a "separating conjunction" that asserts that its sub-formulas hold for disjoint parts of the heap, and a closely related "separating implication". Coupled......, dynamically allocated arrays, and recursive procedures. We will also discuss promising future directions....

  7. Bacterial sources for phenylalkane hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Ellis, L.; Winans, R.E. [Argonne National Lab., IL (United States); Langworthy, T. [Univ. of South Dakota, Vermillion, SD (United States)

    1996-10-01

    The presence of phenylalkane hydrocarbons in geochemical samples has been the source of much controversy. Although an anthropogenic input from detergent sources always appears likely, the distribution of phenylalkane hydrocarbons in some cases far exceeding that attributed to detergent input has led to a reappraisal of this view. Indeed, recent work involving analysis of the lipid hydrocarbon extracts from extant Thermoplasma bacteria has revealed the presence of phenylalkane hydrocarbons. The presence of phenylalkane hydrocarbons in sedimentary organic matter may therefore represent potential biological markers for thermophilic bacteria.

  8. Multi-kaonic Hypernuclei and Kaon Condensation

    Science.gov (United States)

    Gazda, D.; Friedman, E.; Gal, A.; Mareš, J.

    2011-09-01

    This contribution reports on dynamical, self-consistent calculations of multi-bar K hypernuclei, which were performed by adding antikaons to particle-stable nuclear configurations of nucleons, Λ and Ξ hyperons. Our results show a robust pattern of saturation of the bar K separation energy Bbar K as a function of the number of bar K mesons, with Bbar K bounded from above by 200 MeV. The associated baryon densities saturate at values 2-3 times nuclear-matter density. The main reason for saturation is the repulsion induced by the vector meson fields between bar K mesons, similarly to what was found for multi-bar K nuclei. The calculations confirm that strangeness in finite strong-interaction self-bound systems is realized through hyperons, with no room for kaon condensation.

  9. Pds5 regulators segregate cohesion and condensation pathways in Saccharomyces cerevisiae.

    Science.gov (United States)

    Tong, Kevin; Skibbens, Robert V

    2015-06-02

    Cohesins are required both for the tethering together of sister chromatids (termed cohesion) and subsequent condensation into discrete structures-processes fundamental for faithful chromosome segregation into daughter cells. Differentiating between cohesin roles in cohesion and condensation would provide an important advance in studying chromatin metabolism. Pds5 is a cohesin-associated factor that is essential for both cohesion maintenance and condensation. Recent studies revealed that ELG1 deletion suppresses the temperature sensitivity of pds5 mutant cells. However, the mechanisms through which Elg1 may regulate cohesion and condensation remain unknown. Here, we report that ELG1 deletion from pds5-1 mutant cells results in a significant rescue of cohesion, but not condensation, defects. Based on evidence that Elg1 unloads the DNA replication clamp PCNA from DNA, we tested whether PCNA overexpression would similarly rescue pds5-1 mutant cell cohesion defects. The results indeed reveal that elevated levels of PCNA rescue pds5-1 temperature sensitivity and cohesion defects, but do not rescue pds5-1 mutant cell condensation defects. In contrast, RAD61 deletion rescues the condensation defect, but importantly, neither the temperature sensitivity nor cohesion defects exhibited by pds5-1 mutant cells. In combination, these findings reveal that cohesion and condensation are separable pathways and regulated in nonredundant mechanisms. These results are discussed in terms of a new model through which cohesion and condensation are spatially regulated.

  10. Microbial degradation of petroleum hydrocarbons.

    Science.gov (United States)

    Varjani, Sunita J

    2017-01-01

    Petroleum hydrocarbon pollutants are recalcitrant compounds and are classified as priority pollutants. Cleaning up of these pollutants from environment is a real world problem. Bioremediation has become a major method employed in restoration of petroleum hydrocarbon polluted environments that makes use of natural microbial biodegradation activity. Petroleum hydrocarbons utilizing microorganisms are ubiquitously distributed in environment. They naturally biodegrade pollutants and thereby remove them from the environment. Removal of petroleum hydrocarbon pollutants from environment by applying oleophilic microorganisms (individual isolate/consortium of microorganisms) is ecofriendly and economic. Microbial biodegradation of petroleum hydrocarbon pollutants employs the enzyme catalytic activities of microorganisms to enhance the rate of pollutants degradation. This article provides an overview about bioremediation for petroleum hydrocarbon pollutants. It also includes explanation about hydrocarbon metabolism in microorganisms with a special focus on new insights obtained during past couple of years. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. Superconductivity in aromatic hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Kubozono, Yoshihiro, E-mail: kubozono@cc.okayama-u.ac.jp [Research Laboratory for Surface Science, Okayama University, Okayama 700-8530 (Japan); Research Center of New Functional Materials for Energy Production, Storage and Transport, Okayama University, Okayama 700-8530 (Japan); Japan Science and Technology Agency, ACT-C, Kawaguchi 332-0012 (Japan); Goto, Hidenori; Jabuchi, Taihei [Research Laboratory for Surface Science, Okayama University, Okayama 700-8530 (Japan); Yokoya, Takayoshi [Research Laboratory for Surface Science, Okayama University, Okayama 700-8530 (Japan); Research Center of New Functional Materials for Energy Production, Storage and Transport, Okayama University, Okayama 700-8530 (Japan); Kambe, Takashi [Department of Physics, Okayama University, Okayama 700-8530 (Japan); Sakai, Yusuke; Izumi, Masanari; Zheng, Lu; Hamao, Shino; Nguyen, Huyen L.T. [Research Laboratory for Surface Science, Okayama University, Okayama 700-8530 (Japan); Sakata, Masafumi; Kagayama, Tomoko; Shimizu, Katsuya [Center of Science and Technology under Extreme Conditions, Osaka University, Osaka 560-8531 (Japan)

    2015-07-15

    Highlights: • Aromatic superconductor is one of core research subjects in superconductivity. Superconductivity is observed in certain metal-doped aromatic hydrocarbons. Some serious problems to be solved exist for future advancement of the research. This article shows the present status of aromatic superconductors. - Abstract: ‘Aromatic hydrocarbon’ implies an organic molecule that satisfies the (4n + 2) π-electron rule and consists of benzene rings. Doping solid aromatic hydrocarbons with metals provides the superconductivity. The first discovery of such superconductivity was made for K-doped picene (K{sub x}picene, five benzene rings). Its superconducting transition temperatures (T{sub c}’s) were 7 and 18 K. Recently, we found a new superconducting K{sub x}picene phase with a T{sub c} as high as 14 K, so we now know that K{sub x}picene possesses multiple superconducting phases. Besides K{sub x}picene, we discovered new superconductors such as Rb{sub x}picene and Ca{sub x}picene. A most serious problem is that the shielding fraction is ⩽15% for K{sub x}picene and Rb{sub x}picene, and it is often ∼1% for other superconductors. Such low shielding fractions have made it difficult to determine the crystal structures of superconducting phases. Nevertheless, many research groups have expended a great deal of effort to make high quality hydrocarbon superconductors in the five years since the discovery of hydrocarbon superconductivity. At the present stage, superconductivity is observed in certain metal-doped aromatic hydrocarbons (picene, phenanthrene and dibenzopentacene), but the shielding fraction remains stubbornly low. The highest priority research area is to prepare aromatic superconductors with a high superconducting volume-fraction. Despite these difficulties, aromatic superconductivity is still a core research target and presents interesting and potentially breakthrough challenges, such as the positive pressure dependence of T{sub c} that is clearly

  12. Effect of hydrocarbon adsorption on the wettability of rare earth oxide ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Preston, Daniel J.; Miljkovic, Nenad; Sack, Jean; Queeney, John; Wang, Evelyn N., E-mail: enwang@mit.edu [Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); Enright, Ryan [Thermal Management Research Group, Efficient Energy Transfer (etaET) Department, Bell Labs Ireland, Dublin 15 (Ireland)

    2014-07-07

    Vapor condensation is routinely used as an effective means of transferring heat, with dropwise condensation exhibiting a 5 − 7x heat transfer improvement compared to filmwise condensation. However, state-of-the-art techniques to promote dropwise condensation rely on functional hydrophobic coatings, which are often not robust and therefore undesirable for industrial implementation. Natural surface contamination due to hydrocarbon adsorption, particularly on noble metals, has been explored as an alternative approach to realize stable dropwise condensing surfaces. While noble metals are prohibitively expensive, the recent discovery of robust rare earth oxide (REO) hydrophobicity has generated interest for dropwise condensation applications due to material costs approaching 1% of gold; however, the underlying mechanism of REO hydrophobicity remains under debate. In this work, we show through careful experiments and modeling that REO hydrophobicity occurs due to the same hydrocarbon adsorption mechanism seen previously on noble metals. To investigate adsorption dynamics, we studied holmia and ceria REOs, along with control samples of gold and silica, via X-Ray photoelectron spectroscopy (XPS) and dynamic time-resolved contact angle measurements. The contact angle and surface carbon percent started at ≈0 on in-situ argon-plasma-cleaned samples and increased asymptotically over time after exposure to laboratory air, with the rare earth oxides displaying hydrophobic (>90°) advancing contact angle behavior at long times (>4 days). The results indicate that REOs are in fact hydrophilic when clean and become hydrophobic due to hydrocarbon adsorption. Furthermore, this study provides insight into how REOs can be used to promote stable dropwise condensation, which is important for the development of enhanced phase change surfaces.

  13. Effect of hydrocarbon adsorption on the wettability of rare earth oxide ceramics

    Science.gov (United States)

    Preston, Daniel J.; Miljkovic, Nenad; Sack, Jean; Enright, Ryan; Queeney, John; Wang, Evelyn N.

    2014-07-01

    Vapor condensation is routinely used as an effective means of transferring heat, with dropwise condensation exhibiting a 5 - 7x heat transfer improvement compared to filmwise condensation. However, state-of-the-art techniques to promote dropwise condensation rely on functional hydrophobic coatings, which are often not robust and therefore undesirable for industrial implementation. Natural surface contamination due to hydrocarbon adsorption, particularly on noble metals, has been explored as an alternative approach to realize stable dropwise condensing surfaces. While noble metals are prohibitively expensive, the recent discovery of robust rare earth oxide (REO) hydrophobicity has generated interest for dropwise condensation applications due to material costs approaching 1% of gold; however, the underlying mechanism of REO hydrophobicity remains under debate. In this work, we show through careful experiments and modeling that REO hydrophobicity occurs due to the same hydrocarbon adsorption mechanism seen previously on noble metals. To investigate adsorption dynamics, we studied holmia and ceria REOs, along with control samples of gold and silica, via X-Ray photoelectron spectroscopy (XPS) and dynamic time-resolved contact angle measurements. The contact angle and surface carbon percent started at ≈0 on in-situ argon-plasma-cleaned samples and increased asymptotically over time after exposure to laboratory air, with the rare earth oxides displaying hydrophobic (>90°) advancing contact angle behavior at long times (>4 days). The results indicate that REOs are in fact hydrophilic when clean and become hydrophobic due to hydrocarbon adsorption. Furthermore, this study provides insight into how REOs can be used to promote stable dropwise condensation, which is important for the development of enhanced phase change surfaces.

  14. Evaporative Condensers in Comfortable Air Conditioning System

    Institute of Scientific and Technical Information of China (English)

    YIN Ying-de; ZHU Dong-sheng; DU Gui-mei; LI Yuan-xi; SUN He-jing; LIU Qing-ming

    2009-01-01

    The operating theory of an evaporative condenser was expatiated.The difference between an e-vaporative condensing refrigeration system and a general refrigeration system was analyzed.Compared with the air-cooled and the water-cooled,the virtues of energy-conservation and water-conservation of evaporative con-densers were analyzed.Some questions existing in the application of evaporative condensers were pointed out,the corresponding solving methods were analyzed accordingly,and the development trend of evaporative con-densing technique in mechanical refrigeration system field and the applied foreground of evaporative condensers in comfortable air conditioning were prospected.

  15. Collective Excitations in Spin-2 Bose-Einstein Condensates

    Institute of Scientific and Technical Information of China (English)

    HOU Jing-Min; TIAN Li-Jun

    2005-01-01

    The Green's functions and the correlation functions in spin-2 Bose-Einstein condensates at finite temperature are defined and the generalized Dyson-Beliaev equations are introduced. We discuss the spin conservation in z direction and decouple thre Green's functions and the generalized Dyson-Beliaev equations according to different spin conservations in z direction. The anomalous vertex functions are introduced and the self-energies are separated into the proper self-energies and the improper self-energies. The generalized Dyson-Beliaev equations are decoupled according to separation of the self-energies. We calculate the Green's functions step by step in the Bogoliubov approximation and discuss the collective excitations in spin-2 Bose-Einstein condensates in the polar, ferromagnetic, and cyclic cases,respectively.

  16. Condensational theory of stationary tornadoes

    CERN Document Server

    Makarieva, Anastassia M; Nefiodov, Andrei V; 10.1016/j.physleta.2011.04.023

    2012-01-01

    Using the Bernoulli integral for air streamline with condensing water vapor a stationary axisymmetric tornado circulation is described. The obtained profiles of vertical, radial and tangential velocities are in agreement with observations for the Mulhall tornado, world's largest on record and longest-lived among the three tornadoes for which 3D velocity data are available. Maximum possible vortex velocities are estimated.

  17. Approaching Bose-Einstein Condensation

    Science.gov (United States)

    Ferrari, Loris

    2011-01-01

    Bose-Einstein condensation (BEC) is discussed at the level of an advanced course of statistical thermodynamics, clarifying some formal and physical aspects that are usually not covered by the standard pedagogical literature. The non-conventional approach adopted starts by showing that the continuum limit, in certain cases, cancels out the crucial…

  18. Magnetofermionic condensate in two dimensions

    Science.gov (United States)

    Kulik, L. V.; Zhuravlev, A. S.; Dickmann, S.; Gorbunov, A. V.; Timofeev, V. B.; Kukushkin, I. V.; Schmult, S.

    2016-11-01

    Coherent condensate states of particles obeying either Bose or Fermi statistics are in the focus of interest in modern physics. Here we report on condensation of collective excitations with Bose statistics, cyclotron magnetoexcitons, in a high-mobility two-dimensional electron system in a magnetic field. At low temperatures, the dense non-equilibrium ensemble of long-lived triplet magnetoexcitons exhibits both a drastic reduction in the viscosity and a steep enhancement in the response to the external electromagnetic field. The observed effects are related to formation of a super-absorbing state interacting coherently with the electromagnetic field. Simultaneously, the electrons below the Fermi level form a super-emitting state. The effects are explicable from the viewpoint of a coherent condensate phase in a non-equilibrium system of two-dimensional fermions with a fully quantized energy spectrum. The condensation occurs in the space of vectors of magnetic translations, a property providing a completely new landscape for future physical investigations.

  19. Rotary condenser for SC2

    CERN Multimedia

    1975-01-01

    During 1975 the SC2 performance was improved among other things by redesigning some of the elements of the ROTCO (Annual Report 1975, p. 55). The photo shows an interior wiew of the housing of the rotary condenser and of the sixteen sets of shaped stator blades.

  20. Geochemical and isotopic approach to maturity/source/mixing estimations for natural gas and associated condensates in the Thrace Basin, NW Turkey

    Energy Technology Data Exchange (ETDEWEB)

    Guergey, Kadir [University of Pamukkale, Geological Engineering Department, Kinikli Campus, 20070 Denizli (Turkey)]. E-mail: kgurgey@pamukkale.edu.tr; Philp, R. Paul [Geology and Geophysics, University of Oklahoma, Norman, OK 73019 (United States); Clayton, Chris [High Bank House, Eardiston, Tenbury Wells, Worcestershire, WR15 8JJ (United Kingdom); Emiroglu, Hasan [Turkish Petroleum Corporation, Exploration Group, Soeguetoezue, Ankara (Turkey); Siyako, Muzaffer [Turkish Petroleum Corporation, Exploration Group, Soeguetoezue, Ankara (Turkey)

    2005-11-15

    The Tertiary Thrace Basin located in NW Turkey comprises 9 km of clastic-sedimentary column ranging in age from Early Eocene to Recent in age. Fifteen natural gas and 10 associated condensate samples collected from the 11 different gas fields along the NW-SE extending zone of the northern portion of the basin were evaluated on the basis of their chemical and individual C isotopic compositions. For the purpose of the study, the genesis of CH{sub 4}, thermogenic C{sub 2+} gases, and associated condensates were evaluated separately. Methane appears to have 3 origins: Group-1 CH{sub 4} is bacteriogenic (Calculated {delta} {sup 13}C{sub C1-C} = -61.48%o; Silivri Field) and found in Oligocene reservoirs and mixed with the thermogenic Group-2 CH{sub 4}. They probably formed in the Upper Oligocene coal and shales deposited in a marshy-swamp environment of fluvio-deltaic settings. Group-2 ({delta} {sup 13}C{sub C1-C} = -35.80%o; Hamitabat Field) and Group-3 ({delta} {sup 13}C{sub 1-C} = -49.10%o; Degirmenkoey Field) methanes are thermogenic and share the same origin with the Group-2 and Group-3 C{sub 2+} gases. The Group-2 C{sub 2+} gases include 63% of the gas fields. They are produced from both Eocene (overwhelmingly) and Oligocene reservoirs. These gases were almost certainly generated from isotopically heavy terrestrial kerogen ({delta} {sup 13}C = -21%o) present in the Eocene deltaic Hamitabat shales. The Group-3 C{sub 2+} gases, produced from one field, were generated from isotopically light marine kerogen ({delta} {sup 13}C = -29%o). Lower Oligoce ne Mezardere shales deposited in pro-deltaic settings are believed to be the source of these gases. The bulk and individual n-alkane isotopic relationships between the rock extracts, gases, condensates and oils from the basin differentiated two Groups of condensates, which can be genetically linked to the Group-2 and -3 thermogenic C{sub 2+} gases. However, it is crucial to note that condensates do not necessarily correlate

  1. CENTRIFUGAL SEPARATORS

    Science.gov (United States)

    Skarstrom, C.

    1959-03-10

    A centrifugal separator is described for separating gaseous mixtures where the temperature gradients both longitudinally and radially of the centrifuge may be controlled effectively to produce a maximum separation of the process gases flowing through. Tbe invention provides for the balancing of increases and decreases in temperature in various zones of the centrifuge chamber as the result of compression and expansions respectively, of process gases and may be employed effectively both to neutralize harmful temperature gradients and to utilize beneficial temperaturc gradients within the centrifuge.

  2. Cloud condensation nucleus behaviour of selected dicarboxylic acids

    DEFF Research Database (Denmark)

    Poulsen, Mia Frosch Mogensbæk; Nielsen, Ole Faurskov; Bilde, Merete

    Due to relatively high water solubilities and low volatilities under ambient conditions, dicarboxylic acids have a high potential for forming aerosols, i.e. act as cloud condensation nuclei (CCN). Futhermore, dicarboxylic acids have been detected in atmospheric aerosols on many different sites (e......., and Riekkola, M.L , Determination of organic acids in aerosol particles from a coniferous forest by liquid chromatography-mass spectrometry, Journal of Separation Science, 28, 337-346, 2005....

  3. Direct hydrocarbon fuel cells

    Science.gov (United States)

    Barnett, Scott A.; Lai, Tammy; Liu, Jiang

    2010-05-04

    The direct electrochemical oxidation of hydrocarbons in solid oxide fuel cells, to generate greater power densities at lower temperatures without carbon deposition. The performance obtained is comparable to that of fuel cells used for hydrogen, and is achieved by using novel anode composites at low operating temperatures. Such solid oxide fuel cells, regardless of fuel source or operation, can be configured advantageously using the structural geometries of this invention.

  4. THERMOCHEMISTRY OF HYDROCARBON RADICALS

    Energy Technology Data Exchange (ETDEWEB)

    Kent M. Ervin, Principal Investigator

    2004-08-17

    Gas phase negative ion chemistry methods are employed to determine enthalpies of formation of hydrocarbon radicals that are important in combustion processes and to investigate the dynamics of ion-molecule reactions. Using guided ion beam tandem mass spectrometry, we measure collisional threshold energies of endoergic proton transfer and hydrogen atom transfer reactions of hydrocarbon molecules with negative reagent ions. The measured reaction threshold energies for proton transfer yield the relative gas phase acidities. In an alternative methodology, competitive collision-induced dissociation of proton-bound ion-molecule complexes provides accurate gas phase acidities relative to a reference acid. Combined with the electron affinity of the R {center_dot} radical, the gas phase acidity yields the RH bond dissociation energy of the corresponding neutral molecule, or equivalently the enthalpy of formation of the R{center_dot} organic radical, using equation: D(R-H) = {Delta}{sub acid}H(RH) + EA(R) - IE(H). The threshold energy for hydrogen abstraction from a hydrocarbon molecule yields its hydrogen atom affinity relative to the reagent anion, providing the RH bond dissociation energy directly. Electronic structure calculations are used to evaluate the possibility of potential energy barriers or dynamical constrictions along the reaction path, and as input for RRKM and phase space theory calculations. In newer experiments, we have measured the product velocity distributions to obtain additional information on the energetics and dynamics of the reactions.

  5. Both Chromosome Decondensation and Condensation Are Dependent on DNA Replication in C. elegans Embryos.

    Science.gov (United States)

    Sonneville, Remi; Craig, Gillian; Labib, Karim; Gartner, Anton; Blow, J Julian

    2015-07-21

    During cell division, chromatin alternates between a condensed state to facilitate chromosome segregation and a decondensed form when DNA replicates. In most tissues, S phase and mitosis are separated by defined G1 and G2 gap phases, but early embryogenesis involves rapid oscillations between replication and mitosis. Using Caenorhabditis elegans embryos as a model system, we show that chromosome condensation and condensin II concentration on chromosomal axes require replicated DNA. In addition, we found that, during late telophase, replication initiates on condensed chromosomes and promotes the rapid decondensation of the chromatin. Upon replication initiation, the CDC-45-MCM-GINS (CMG) DNA helicase drives the release of condensin I complexes from chromatin and the activation or displacement of inactive MCM-2-7 complexes, which together with the nucleoporin MEL-28/ELYS tethers condensed chromatin to the nuclear envelope, thereby promoting chromatin decondensation. Our results show how, in an early embryo, the chromosome-condensation cycle is functionally linked with DNA replication.

  6. Measurement of Total Condensation on a Shrouded Cryogenic Surface using a Single Quart Crystal Microbalance

    Energy Technology Data Exchange (ETDEWEB)

    Haid, B J; Malsbury, T N; Gibson, C R; Warren, C T

    2008-06-10

    A single quartz crystal microbalance (QCM) is cooled to 18 K to measure condensation rates inside of a retractable ''shroud'' enclosure. The shroud is of a design intended to minimize condensate on fusion targets to be fielded at the National Ignition Facility (NIF). The shroud has a double-wall construction with an inner wall that may be cooled to 75-100 K. The QCM and the shroud system were mounted in a vacuum chamber and cooled using a cryocooler. Condensation rates were measured at various vacuum levels and compositions, and with the shroud open or closed. A technique for measuring total condensate during the cooldown of the system with an accuracy of better than 1.0 x 10{sup -6} g/cm{sup 2} was also demonstrated. The technique involved a separate measurement of the condensate-free crystal frequency as a function of temperature that was later applied to the measurement of interest.

  7. Application of C5-C13 light hydrocarbons in depositional envlrOnment diagnosis

    Institute of Scientific and Technical Information of China (English)

    Peirong Wang; Guanjun Xu; Tingrong Xiao; Dajiang Zhang; Bin Zhang

    2008-01-01

    Based on the geological background and Gammacerane/C31H(S+R)ratios,source rock depositional environments of the studied oil samples(194)from 13 oilfields were classified into three groups according to salinity:saline-lacustrine facies,fresh to brackish lacustrine facies(including linmetic facies),and semi-saline to saline facies(including marine facies of the Tarim Basin).C5-C13 compound groups in the crude oils were separated by GC,and about 286 compounds were qualitatively analyzed.The geochemical application of the C6-C13 compound groups and their ratios between each group with individual carbon number was investigated.Our studies show that(1)C6-C13 compound groups and their ratios in the crude oils could serve as new reliable parameters for oil-oil correlation because the C6-C13 light fractions are the major oil component,especially in light oil or condensate,in which they account for almost 90%of the whole oil;(2)the compound groups of C7 light hydrocarbons in oils derived from different depositional environments with different salinity have different characteristics;(3)C6-C13 compound groups and ratios may be affected by other factors such as maturity,but they are mainly controlled by salinity of depositional waters.

  8. Molecular Effects on Evaporation and Condensation

    OpenAIRE

    Meland, Roar

    2002-01-01

    In this thesis the evaporation from and condensation on a plane liquid surface have been studied by analysis and molecular dynamics simulations. The effect of the condensation coefficient on the inverted temperature gradient for a two-surface evaporation-condensation geometry is investigated by the moment method. The influence of the molecular exchange phenomenon on the gas-kinetic treatment of evaporation and condensation is shown to be neglible under certain assumptions. Methods to simulate...

  9. Direct hydrocarbon exploration and gas reservoir development technology

    Energy Technology Data Exchange (ETDEWEB)

    Kwak, Young Hoon; Oh, Jae Ho; Jeong, Tae Jin [Korea Inst. of Geology Mining and Materials, Taejon (Korea, Republic of)] [and others

    1995-12-01

    In order to enhance the capability of petroleum exploration and development techniques, three year project (1994 - 1997) was initiated on the research of direct hydrocarbon exploration and gas reservoir development. This project consists of four sub-projects. (1) Oil(Gas) - source rock correlation technique: The overview of bio-marker parameters which are applicable to hydrocarbon exploration has been illustrated. Experimental analysis of saturated hydrocarbon and bio-markers of the Pohang E and F core samples has been carried out. (2) Study on surface geochemistry and microbiology for hydrocarbon exploration: the test results of the experimental device for extraction of dissolved gases from water show that the device can be utilized for the gas geochemistry of water. (3) Development of gas and gas condensate reservoirs: There are two types of reservoir characterization. For the reservoir formation characterization, calculation of conditional simulation was compared with that of unconditional simulation. In the reservoir fluid characterization, phase behavior calculations revealed that the component grouping is more important than the increase of number of components. (4) Numerical modeling of seismic wave propagation and full waveform inversion: Three individual sections are presented. The first one is devoted to the inversion theory in general sense. The second and the third sections deal with the frequency domain pseudo waveform inversion of seismic reflection data and refraction data respectively. (author). 180 refs., 91 figs., 60 tabs.

  10. Environmental Risk Limits for mineral oil (Total Petroleum Hydrocarbons)

    NARCIS (Netherlands)

    Verbruggen EMJ; SEC

    2004-01-01

    In this report maximum permissible concentrations and serious risk concentrations are derived for mineral oil (total petroleum hydrocarbons). The used method is based on a fraction analysis approach, in which aliphatic and aromatic compounds are regarded separately and are both further divided into

  11. Aromatic hydrocarbons associated with brines from geopressured wells

    Energy Technology Data Exchange (ETDEWEB)

    1992-09-01

    The various operational wells were sampled on a monthly basis for the yield of the cryocondensate hydrocarbons. The total cryocondensate concentration as well as the concentrations in the brine and the gas after passing the separator system are summarized. The total cryocondensate yield is displayed.

  12. Polymer induced condensation of dna supercoils

    NARCIS (Netherlands)

    Bessa Ramos Jr., J.E.; Ruggiero Neto, J.; Vries, de R.J.

    2008-01-01

    Macromolecular crowding is thought to be a significant factor driving DNA condensation in prokaryotic cells. Whereas DNA in prokaryotes is supercoiled, studies on crowding-induced DNA condensation have so far focused on linear DNA. Here we compare DNA condensation by poly(ethylene oxide) for superco

  13. Condensed matter analogues of cosmology

    Science.gov (United States)

    Kibble, Tom; Srivastava, Ajit

    2013-10-01

    It is always exciting when developments in one branch of physics turn out to have relevance in a quite different branch. It would be hard to find two branches farther apart in terms of energy scales than early-universe cosmology and low-temperature condensed matter physics. Nevertheless ideas about the formation of topological defects during rapid phase transitions that originated in the context of the very early universe have proved remarkably fruitful when applied to a variety of condensed matter systems. The mathematical frameworks for describing these systems can be very similar. This interconnection has led to a deeper understanding of the phenomena in condensed matter systems utilizing ideas from cosmology. At the same time, one can view these condensed matter analogues as providing, at least in a limited sense, experimental access to the phenomena of the early universe for which no direct probe is possible. As this special issue well illustrates, this remains a dynamic and exciting field. The basic idea is that when a system goes through a rapid symmetry-breaking phase transition from a symmetric phase into one with spontaneously broken symmetry, the order parameter may make different choices in different regions, creating domains that when they meet can trap defects. The scale of those domains, and hence the density of defects, is constrained by the rate at which the system goes through the transition and the speed with which order parameter information propagates. This is what has come to be known as the Kibble-Zurek mechanism. The resultant scaling laws have now been tested in a considerable variety of different systems. The earliest experiments illustrating the analogy between cosmology and condensed matter were in liquid crystals, in particular on the isotropic-to-nematic transition, primarily because it is very easy to induce the phase transition (typically at room temperature) and to image precisely what is going on. This field remains one of the

  14. Direct production of fractionated and upgraded hydrocarbon fuels from biomass

    Science.gov (United States)

    Felix, Larry G.; Linck, Martin B.; Marker, Terry L.; Roberts, Michael J.

    2014-08-26

    Multistage processing of biomass to produce at least two separate fungible fuel streams, one dominated by gasoline boiling-point range liquids and the other by diesel boiling-point range liquids. The processing involves hydrotreating the biomass to produce a hydrotreatment product including a deoxygenated hydrocarbon product of gasoline and diesel boiling materials, followed by separating each of the gasoline and diesel boiling materials from the hydrotreatment product and each other.

  15. A study of light hydrocarbons (C{sub 4}-C{sub 1}3) in source rocks and petroleum fluid

    Energy Technology Data Exchange (ETDEWEB)

    Odden, Wenche

    2000-07-01

    This thesis consists of an introduction and five included papers. Of these, four papers are published in international journals and the fifth was submitted for review in April 2000. Emphasis has been placed on both naturally and artificially generated light hydrocarbons in petroleum fluids and their proposed source rocks as well as direct application of light hydrocarbons to oil/source rock correlations. Collectively, these papers describe a strategy for interpreting the source of the light hydrocarbons in original oils and condensates as well as the source of the asphaltene fractions from the reservoir fluids. The influence of maturity on light hydrocarbon composition has also been evaluated. The papers include (1) compositional data on the light hydrocarbons from thermal extracts and kerogen pyrolysates of sediment samples, (2) light hydrocarbon data of oils and condensates as well as the pyrolysis products of the asphaltenes from these fluids, (3) assessment of compositional alteration effects, such as selective losses of light hydrocarbons due to evaporation, thermal maturity, phase fractionation and biodegradation, (4) comparison of naturally and artificially generated light hydrocarbons, and (5) compound-specific carbon isotope analysis of the whole range of hydrocarbons of all sample types. (author)

  16. Fundamentals of condensed matter physics

    CERN Document Server

    Cohen, Marvin L

    2016-01-01

    Based on an established course and covering the fundamentals, central areas, and contemporary topics of this diverse field, Fundamentals of Condensed Matter Physics is a much-needed textbook for graduate students. The book begins with an introduction to the modern conceptual models of a solid from the points of view of interacting atoms and elementary excitations. It then provides students with a thorough grounding in electronic structure as a starting point to understand many properties of condensed matter systems - electronic, structural, vibrational, thermal, optical, transport, magnetic and superconductivity - and methods to calculate them. Taking readers through the concepts and techniques, the text gives both theoretically and experimentally inclined students the knowledge needed for research and teaching careers in this field. It features 200 illustrations, 40 worked examples and 150 homework problems for students to test their understanding. Solutions to the problems for instructors are available at w...

  17. Polymer Bose–Einstein condensates

    Energy Technology Data Exchange (ETDEWEB)

    Castellanos, E., E-mail: ecastellanos@fis.cinvestav.mx [Departamento de Física, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, A.P. 14-740, México D.F. 07000 (Mexico); Chacón-Acosta, G., E-mail: gchacon@correo.cua.uam.mx [Departamento de Matemáticas Aplicadas y Sistemas, Universidad Autónoma Metropolitana-Cuajimalpa, Artificios 40, México D.F. 01120 (Mexico)

    2013-05-13

    In this work we analyze a non-interacting one-dimensional polymer Bose–Einstein condensate in a harmonic trap within the semiclassical approximation. We use an effective Hamiltonian coming from the polymer quantization that arises in loop quantum gravity. We calculate the number of particles in order to obtain the critical temperature. The Bose–Einstein functions are replaced by series, whose high order terms are related to powers of the polymer length. It is shown that the condensation temperature presents a shift respect to the standard case, for small values of the polymer scale. In typical experimental conditions, it is possible to establish a bound for λ{sup 2} up to ≲10{sup −16} m{sup 2}. To improve this bound we should decrease the frequency of the trap and also decrease the number of particles.

  18. Resin regeneration device for condensate desalter

    Energy Technology Data Exchange (ETDEWEB)

    Segawa, Yoshihiro [Toshiba Engineering Co. Ltd., Kawasaki, Kanagawa (Japan); Hirose, Yuki

    1998-07-28

    The present invention provides a resin regeneration device for a condensate desalter of a nuclear power plant. Namely, both anionic and cationic exchange resins are supplied in a mixed state from a forwarding water desalting tower to an anionic resin regeneration tower. In the anionic resin generation tower, the resin is once separated to an anionic exchange region layer, a mixed resin layer and an cationic exchange resin layer in this order from the upper portion by water injected from a stirring water injection tube disposed at the bottom. Then, water is injected from a developing water injection tube disposed at the lower portion of the mixed resin layer to develop the cationic exchange resin layer and the mixed resin layer to the upper portion of the cationic resin regeneration tower. Subsequently, the amount of the injection of the developing water is reduced to such a flow rate that only the anionic exchange resin is precipitated. Then, a cationic exchange resin layer is formed at the upper portion and an anion exchange resin layer is formed at the lower portion of the developing water injection tube of the cationic resin regeneration tower. The anionic exchange resin is transferred to the anionic exchange resin regeneration tower in this state. According to the present invention, the mixed resin layer can be separated to anionic and cationic exchange resins easily and reliably. (I.S.)

  19. Is countercurrent regeneration an option for condensate polishing? Yes, it is.

    Energy Technology Data Exchange (ETDEWEB)

    Daucik, K. [DONG Energy Generation A/S, Fredericia (Denmark)

    2008-03-15

    This paper presents a brief report on operation experience with a three-train separate bed condensate polisher in countercurrent operation/regeneration mode installed at a 400 MW ultra supercritical unit. Operation data show that the quality of the polished condensate is superior to that of the previously used standard (cation-mixed bed) condensate polisher, and it has been possible to almost completely eliminate sodium sulfate-related deposition problems in the plant cycle experienced when operating with that standard design unit. (orig.)

  20. Dual-species Bose-Einstein condensate of Rb87 and Cs133

    Science.gov (United States)

    McCarron, D. J.; Cho, H. W.; Jenkin, D. L.; Köppinger, M. P.; Cornish, S. L.

    2011-07-01

    We report the formation of a dual-species Bose-Einstein condensate of Rb87 and Cs133 in the same trapping potential. Our method exploits the efficient sympathetic cooling of Cs133 via elastic collisions with Rb87, initially in a magnetic quadrupole trap and subsequently in a levitated optical trap. The two condensates each contain up to 2×104 atoms and exhibit a striking phase separation, revealing the mixture to be immiscible due to strong repulsive interspecies interactions. Sacrificing all the Rb87 during the cooling, we create single-species Cs133 condensates of up to 6×104 atoms.

  1. Atomistic modeling of dropwise condensation

    Science.gov (United States)

    Sikarwar, B. S.; Singh, P. L.; Muralidhar, K.; Khandekar, S.

    2016-05-01

    The basic aim of the atomistic modeling of condensation of water is to determine the size of the stable cluster and connect phenomena occurring at atomic scale to the macroscale. In this paper, a population balance model is described in terms of the rate equations to obtain the number density distribution of the resulting clusters. The residence time is taken to be large enough so that sufficient time is available for all the adatoms existing in vapor-phase to loose their latent heat and get condensed. The simulation assumes clusters of a given size to be formed from clusters of smaller sizes, but not by the disintegration of the larger clusters. The largest stable cluster size in the number density distribution is taken to be representative of the minimum drop radius formed in a dropwise condensation process. A numerical confirmation of this result against predictions based on a thermodynamic model has been obtained. Results show that the number density distribution is sensitive to the surface diffusion coefficient and the rate of vapor flux impinging on the substrate. The minimum drop radius increases with the diffusion coefficient and the impinging vapor flux; however, the dependence is weak. The minimum drop radius predicted from thermodynamic considerations matches the prediction of the cluster model, though the former does not take into account the effect of the surface properties on the nucleation phenomena. For a chemically passive surface, the diffusion coefficient and the residence time are dependent on the surface texture via the coefficient of friction. Thus, physical texturing provides a means of changing, within limits, the minimum drop radius. The study reveals that surface texturing at the scale of the minimum drop radius does not provide controllability of the macro-scale dropwise condensation at large timescales when a dynamic steady-state is reached.

  2. Advances in condensed matter optics

    CERN Document Server

    Chen, Liangyao; Jiang, Xunya; Jin, Kuijuan; Liu, Hui; Zhao, Haibin

    2015-01-01

    This book describes some of the more recent progresses and developmentsin the study of condensed matter optics in both theoretic and experimental fields.It will help readers, especially graduate students and scientists who are studying and working in the nano-photonic field, to understand more deeply the characteristics of light waves propagated in nano-structure-based materials with potential applications in the future.

  3. Radiative corrections to Bose condensation

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, A. (Academia de Ciencias de Cuba, La Habana. Inst. de Matematica, Cibernetica y Computacion)

    1985-04-01

    The Bose condensation of the scalar field in a theory behaving in the Coleman-Weinberg mode is considered. The effective potential of the model is computed within the semiclassical approximation in a dimensional regularization scheme. Radiative corrections are shown to introduce certain ..mu..-dependent ultraviolet divergences in the effective potential coming from the Many-Particle theory. The weight of radiative corrections in the dynamics of the system is strongly modified by the charge density.

  4. Improved ZIF-8 membrane: Effect of activation procedure and determination of diffusivities of light hydrocarbons

    KAUST Repository

    Pan, Yichang

    2015-06-23

    Zeolitic imidazolate framework ZIF-8 has shown great potential for effective separation of hydrocarbon mixtures based on its intrinsic ultramicroporous feature. In order to explore the permeation and diffusion properties of hydrocarbons through ZIF-8 membrane, high-quality ZIF-8 membranes with a separation factor of ~90 for propylene/propane are successfully prepared via optimizing the activation processes. Single-component permeation data for hydrocarbons (C1–C4) through the improved ZIF-8 membrane are measured and analyzed by Maxwell-Stefan (MS) model to get the transport diffusivities of these hydrocarbons. The diffusivity values of hydrocarbon compare well with those obtained by other experimental techniques. Binary mixture permeation also can be well predicted through single-component adsorption parameters.

  5. Theory of laminar film condensation

    CERN Document Server

    Fujii, Tetsu

    1991-01-01

    Since the petroleum crisis in the 1970s, a lot of effort to save energy was made in industry, and remarkable achievements have been made. In the research and development concerning thermal energy, however, it was clar­ ified that one of the most important problems was manufacturing con­ densing systems with smaller size and higher performance. To solve this problem we need a method which synthesizes selections_ of the type of con­ denser, cooling tube and its arrangement, assessment of fouling on the cooling surfaces, consideration of transient characteristics of a condenser, etc. The majority of effort, however, has been to devise a surface element which enhances the heat transfer coefficient in condensation of a single or multicomponent vapor. Condensation phenomena are complexly affected by a lot of physical property values, and accordingly the results of theo­ retical research are expressed with several dimensionless parameters. On the other hand, the experimental research is limited to those with som...

  6. Condensation on Slippery Asymmetric Bumps

    Science.gov (United States)

    Park, Kyoo-Chul; Kim, Philseok; Aizenberg, Joanna

    2016-11-01

    Controlling dropwise condensation by designing surfaces that enable droplets to grow rapidly and be shed as quickly as possible is fundamental to water harvesting systems, thermal power generation, distillation towers, etc. However, cutting-edge approaches based on micro/nanoscale textures suffer from intrinsic trade-offs that make it difficult to optimize both growth and transport at once. Here we present a conceptually different design approach based on principles derived from Namib desert beetles, cacti, and pitcher plants that synergistically couples both aspects of condensation and outperforms other synthetic surfaces. Inspired by an unconventional interpretation of the role of the beetle's bump geometry in promoting condensation, we show how to maximize vapor diffusion flux at the apex of convex millimetric bumps by optimizing curvature and shape. Integrating this apex geometry with a widening slope analogous to cactus spines couples rapid drop growth with fast directional transport, by creating a free energy profile that drives the drop down the slope. This coupling is further enhanced by a slippery, pitcher plant-inspired coating that facilitates feedback between coalescence-driven growth and capillary-driven motion. We further observe an unprecedented six-fold higher exponent in growth rate and much faster shedding time compared to other surfaces. We envision that our fundamental understanding and rational design strategy can be applied to a wide range of phase change applications.

  7. Condensate from a two-stage gasifier

    DEFF Research Database (Denmark)

    Bentzen, Jens Dall; Henriksen, Ulrik Birk; Hindsgaul, Claus

    2000-01-01

    that the organic compounds and the inhibition effect are very low even before treatment with activated carbon. The moderate inhibition effect relates to a high content of ammonia in the condensate. The nitrifiers become tolerant to the condensate after a few weeks of exposure. The level of organic compounds......Condensate, produced when gas from downdraft biomass gasifier is cooled, contains organic compounds that inhibit nitrifiers. Treatment with activated carbon removes most of the organics and makes the condensate far less inhibitory. The condensate from an optimised two-stage gasifier is so clean...

  8. Quality factors to consider in condensate selection

    Energy Technology Data Exchange (ETDEWEB)

    Lywood, B. [Crude Quality Inc., Edmonton, AB (Canada)

    2009-07-01

    Many factors must be considered when assessing the feasibility of using condensates as a diluent for bitumen or heavy crude production blending. In addition to commercial issues, the effect of condensate quality is a key consideration. In general, condensate quality refers to density and viscosity. However, valuation decisions could be enhanced through the expansion of quality definitions and understanding. This presentation focused on the parameters that are important in choosing a diluent grade product. It also reviewed pipeline and industry specifications and provided additional information regarding general properties for bitumen and condensate compatibility; sampling and quality testing needs; and existing sources of information regarding condensate quality. tabs., figs.

  9. Integral Reactor Containment Condensation Model and Experimental Validation

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Qiao [Oregon State Univ., Corvallis, OR (United States); Corradini, Michael [Univ. of Wisconsin, Madison, WI (United States)

    2016-05-02

    ranging from 4 to 21 bar with three different static inventories of non-condensable gas. Condensation and heat transfer rates were evaluated employing several methods, notably from measured temperature gradients in the HTP as well as measured condensate formation rates. A detailed mass and energy accounting was used to assess the various measurement methods and to support simplifying assumptions required for the analysis. Condensation heat fluxes and heat transfer coefficients are calculated and presented as a function of pressure to satisfy the objectives of this investigation. The major conclusions for those tests are summarized below: (1) In the steam blow-down tests, the initial condensation heat transfer process involves the heating-up of the containment heat transfer plate. An inverse heat conduction model was developed to capture the rapid transient transfer characteristics, and the analysis method is applicable to SMR safety analysis. (2) The average condensation heat transfer coefficients for different pressure conditions and non-condensable gas mass fractions were obtained from the integral test facility, through the measurements of the heat conduction rate across the containment heat transfer plate, and from the water condensation rates measurement based on the total energy balance equation. 15 (3) The test results using the measured HTP wall temperatures are considerably lower than popular condensation models would predict mainly due to the side wall conduction effects in the existing MASLWR integral test facility. The data revealed the detailed heat transfer characteristics of the model containment, important to the SMR safety analysis and the validation of associated evaluation model. However this approach, unlike separate effect tests, cannot isolate the condensation heat transfer coefficient over the containment wall, and therefore is not suitable for the assessment of the condensation heat transfer coefficient against system pressure and noncondensable

  10. Study of the Dynamics of a Condensing Bubble Using Lattice Boltzmann Method

    Directory of Open Access Journals (Sweden)

    Shahnawaz Ahmed

    2015-06-01

    Full Text Available Mesoscopic lattice Boltzmann method (LBM is used to discretize the governing equations for a steam bubble inside a tube filled with water. The bubbles are kept at higher temperature compared to its boiling point while the liquid is kept subcooled. Heat transfer is allowed to take place between the two phases by virtue of which the bubble will condense. Three separate probability distribution functions are used in LBM to handle continuity, momentum and energy equations separately. The interface is considered to be diffused within a narrow zone and it has been modeled using convective Cahn-Hillard equation. Combined diffused interface-LBM framework is adapted accordingly to handle complex interface separating two phases having high density ratio. Developed model is validated with respect to established correlations for instantaneous equivalent radius of a spherical condensing bubble. Numerical snapshots of the simulation depict that the bubble volume decreases faster for higher degree of superheat. The degrees of superheat are varied over a wide range to note its effect on bubble shape and size. Effect of initial volume of the bubble on the condensation rate is also studied. It has been observed that for a fixed degree of superheat, the condensation rate is not exactly proportional to its volume. Due to the variation in interfacial configuration for different sized bubbles, condensation rate changes drastically. Influence of gravity on the rate of condensation is also studied using the developed methodology.

  11. Hydrocarbon conversion catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Hoek, A.; Huizinga, T.; Maxwell, I.E.

    1989-08-15

    This patent describes a process for hydrocracking hydrocarbon oils into products of lower average molecular weight and lower average boiling point. It comprises contacting a hydrocarbon oil at a temperature between 250{sup 0}C and 500{sup 0}C and a pressure up to 300 bar in the presence of hydrogen with a catalyst consisting essentially of a Y zeolite modified to have a unit cell size below 24.35A, a water absorption capacity (at 25{sup 0}C and a rho/rho/sub o/ value of 0.2) of at least 8% by weight of the zeolite and a pore volume of at least 0.25 ml/g wherein between 10% and 60% of the total pore volume is made up of pores having a diameter of at least 8 nm; an alumina binder and at least one hydrogenation component selected from the group consisting of a Group VI metal, a Group VIII metal and mixtures thereof.

  12. Catalytic cracking of non-edible sunflower oil over ZSM-5 for hydrocarbon bio-jet fuel.

    Science.gov (United States)

    Zhao, Xianhui; Wei, Lin; Julson, James; Qiao, Qiquan; Dubey, Ashish; Anderson, Gary

    2015-03-25

    Non-edible sunflower oils that were extracted from sunflower residual wastes were catalytically cracked over a ZSM-5 catalyst in a fixed-bed reactor at three different reaction temperatures: 450°C, 500°C and 550°C. The catalyst was characterized using XRD, FT-IR, BET and SEM. Characterizations of the upgraded sunflower oils, hydrocarbon fuels, distillation residues and non-condensable gases were carried out. The effect of the reaction temperature on the yield and quality of liquid products was discussed. The results showed that the reaction temperature affected the hydrocarbon fuel yield but had a minor influence on its properties. The highest conversion efficiency from sunflower oils to hydrocarbon fuels was 30.1%, which was obtained at 550°C. The reaction temperature affected the component content of the non-condensable gases. The non-condensable gases generated at 550°C contained the highest content of light hydrocarbons (C1-C5), CO, CO2 and H2. Compared to raw sunflower oils, the properties of hydrocarbon fuels including the dynamic viscosity, pH, moisture content, density, oxygen content and heating value were improved.

  13. GPS Separator

    CERN Multimedia

    2016-01-01

    Footage of the 70 degree ISOLDE GPS separator magnet MAG70 as well as the switchyard for the Central Mass and GLM (GPS Low Mass) and GHM (GPS High Mass) beamlines in the GPS separator zone. In the GPS20 vacuum sector equipment such as the long GPS scanner 482 / 483 unit, faraday cup FC 490, vacuum valves and wiregrid piston WG210 and WG475 and radiation monitors can also be seen. Also the RILIS laser guidance and trajectory can be seen, the GPS main beamgate switch box and the actual GLM, GHM and Central Beamline beamgates in the beamlines as well as the first electrostatic quadrupoles for the GPS lines. Close up of the GHM deflector plates motor and connections and the inspection glass at the GHM side of the switchyard.

  14. HRS Separator

    CERN Multimedia

    2016-01-01

    Footage of the 90 and 60 degree ISOLDE HRS separator magnets in the HRS separator zone. In the two vacuum sectors HRS20 and HRS30 equipment such as the HRS slits SL240, the HRS faraday cup FC300 and wiregrid WG210 can be spotted. Vacuum valves, turbo pumps, beamlines, quadrupoles, water and compressed air connections, DC and signal cabling can be seen throughout the video. The HRS main and user beamgate in the beamline between MAG90 and MAG60 and its switchboxes as well as all vacuum bellows and flanges are shown. Instrumentation such as the HRS scanner unit 482 / 483, the HRS WG470 wiregrid and slits piston can be seen. The different quadrupoles and supports are shown as well as the RILIS guidance tubes and installation at the magnets and the different radiation monitors.

  15. Method and facility for the recovery of hydrocarbons from a gas-air compound. Verfahren und Vorrichtung zur Rueckgewinnung von Kohlenwasserstoffen aus einem Gas-Luft-Gemisch

    Energy Technology Data Exchange (ETDEWEB)

    Hagenkoetter, M.; Hoelter, H.; Sdrojewski, R.

    1991-08-01

    A method or rather facility for the recovery of hydrocarbons from a gas-air compound works as follows: At first the gas-air compound is cooled down and brought to condensation. The hydrocarbons remaining in the gas-air compound after condensation are combusted in an internal combustion engine. The energy generated by the internal combustion engine is utilized for the operation of the cooling system planned for cooling and condensation. The cooling systen is developed and operated in a way that the gas-air compound is purified as far as possible from hydrocarbons and impurities when penetrating the cooling system. Behind the cooling system in front of the internal combustion engine fuel is apportioned to the gas-air compound.

  16. Upgrading of petroleum oil feedstocks using alkali metals and hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, John Howard

    2014-09-09

    A method of upgrading an oil feedstock by removing heteroatoms and/or one or more heavy metals from the oil feedstock composition. This method reacts the oil feedstock with an alkali metal and an upgradant hydrocarbon. The alkali metal reacts with a portion of the heteroatoms and/or one or more heavy metals to form an inorganic phase separable from the organic oil feedstock material. The upgradant hydrocarbon bonds to the oil feedstock material and increases the number of carbon atoms in the product. This increase in the number of carbon atoms of the product increases the energy value of the resulting oil feedstock.

  17. Upgrading of petroleum oil feedstocks using alkali metals and hydrocarbons

    Science.gov (United States)

    Gordon, John Howard

    2014-09-09

    A method of upgrading an oil feedstock by removing heteroatoms and/or one or more heavy metals from the oil feedstock composition. This method reacts the oil feedstock with an alkali metal and an upgradant hydrocarbon. The alkali metal reacts with a portion of the heteroatoms and/or one or more heavy metals to form an inorganic phase separable from the organic oil feedstock material. The upgradant hydrocarbon bonds to the oil feedstock material and increases the number of carbon atoms in the product. This increase in the number of carbon atoms of the product increases the energy value of the resulting oil feedstock.

  18. Thermophysical Properties of Hydrocarbon Mixtures

    Science.gov (United States)

    SRD 4 NIST Thermophysical Properties of Hydrocarbon Mixtures (PC database for purchase)   Interactive computer program for predicting thermodynamic and transport properties of pure fluids and fluid mixtures containing up to 20 components. The components are selected from a database of 196 components, mostly hydrocarbons.

  19. Hydrocarbon Receptor Pathway in Dogs

    NARCIS (Netherlands)

    Steenbeek, F.G. van; Spee, B.; Penning, L.C.; Kummeling, A.; Gils, I.H.M.; Grinwis, G.C.M.; Leenen, D. van; Holstege, F.C.P.; Vos-Loohuis, M.; Rothuizen, J.; Leegwater, P.A.J.

    2013-01-01

    The aryl hydrocarbon receptor (AHR) mediates biological responses to toxic chemicals. An unexpected role for AHR in vascularization was suggested when mice lacking AHR displayed impaired closure of the ductus venosus after birth, as did knockout mice for aryl hydrocarbon receptor interacting protein

  20. Hydrocarbon Receptor Pathway in Dogs

    NARCIS (Netherlands)

    Steenbeek, F.G. van; Spee, B.; Penning, L.C.; Kummeling, A.; Gils, I.H.M.; Grinwis, G.C.M.; Leenen, D. van; Holstege, F.C.P.; Vos-Loohuis, M.; Rothuizen, J.; Leegwater, P.A.J.

    The aryl hydrocarbon receptor (AHR) mediates biological responses to toxic chemicals. An unexpected role for AHR in vascularization was suggested when mice lacking AHR displayed impaired closure of the ductus venosus after birth, as did knockout mice for aryl hydrocarbon receptor interacting

  1. Investigation of the composition of emissions from the vent of a carbon disulfide column condenser-cooler

    Energy Technology Data Exchange (ETDEWEB)

    Lisina, L.A.; Yaroslavskaya, T.A.; Ivanova, V.V.

    1983-01-01

    The gas-vapor mixture entering the atmosphere from the condenser-cooler vent consists not only of hydrocarbon vapors, but also noncondensing gases. On an increase in the temperature of the gas-vapor mixture there is an increase in the quantity of emissions, as well as an increase in the volatility of the hydrocarbons, with a decrease in the solubility of the gases. The noncondensing gases present in the crude benzol are apparently absorbed by the wash oil from the coke oven gas.

  2. Condensation on slippery asymmetric bumps

    Science.gov (United States)

    Park, Kyoo-Chul; Kim, Philseok; Grinthal, Alison; He, Neil; Fox, David; Weaver, James C.; Aizenberg, Joanna

    2016-03-01

    Controlling dropwise condensation is fundamental to water-harvesting systems, desalination, thermal power generation, air conditioning, distillation towers, and numerous other applications. For any of these, it is essential to design surfaces that enable droplets to grow rapidly and to be shed as quickly as possible. However, approaches based on microscale, nanoscale or molecular-scale textures suffer from intrinsic trade-offs that make it difficult to optimize both growth and transport at once. Here we present a conceptually different design approach—based on principles derived from Namib desert beetles, cacti, and pitcher plants—that synergistically combines these aspects of condensation and substantially outperforms other synthetic surfaces. Inspired by an unconventional interpretation of the role of the beetle’s bumpy surface geometry in promoting condensation, and using theoretical modelling, we show how to maximize vapour diffusion fluxat the apex of convex millimetric bumps by optimizing the radius of curvature and cross-sectional shape. Integrating this apex geometry with a widening slope, analogous to cactus spines, directly couples facilitated droplet growth with fast directional transport, by creating a free-energy profile that drives the droplet down the slope before its growth rate can decrease. This coupling is further enhanced by a slippery, pitcher-plant-inspired nanocoating that facilitates feedback between coalescence-driven growth and capillary-driven motion on the way down. Bumps that are rationally designed to integrate these mechanisms are able to grow and transport large droplets even against gravity and overcome the effect of an unfavourable temperature gradient. We further observe an unprecedented sixfold-higher exponent of growth rate, faster onset, higher steady-state turnover rate, and a greater volume of water collected compared to other surfaces. We envision that this fundamental understanding and rational design strategy can be

  3. Quantum tunnelling in condensed media

    CERN Document Server

    Kagan, Yu

    1992-01-01

    The essays in this book deal with of the problem of quantum tunnelling and related behavior of a microscopic or macroscopic system, which interacts strongly with an ""environment"" - this being some form of condensed matter. The ""system"" in question need not be physically distinct from its environment, but could, for example, be one particular degree of freedom on which attention is focussed, as in the case of the Josephson junction studied in several of the papers. This general problem has been studied in many hundreds, if not thousands, of articles in the literature, in contexts as diverse

  4. Velocity condensation for magnetotactic bacteria

    CERN Document Server

    Rupprecht, Jean-Francois; Bocquet, Lydéric

    2015-01-01

    Magnetotactic swimmers tend to align along magnetic field lines against stochastic reorientations. We show that the swimming strategy, e.g. active Brownian motion versus run-and-tumble dynamics, strongly affects the orientation statistics. The latter can exhibit a velocity condensation whereby the alignment probability density diverges. As a consequence, we find that the swimming strategy affects the nature of the phase transition to collective motion, indicating that L\\'evy run-and-tumble walks can outperform active Brownian processes as strategies to trigger collective behavior.

  5. Dropwise Condensation on Hydrophobic Cylinders

    CERN Document Server

    Park, Kyoo-Chul; Hoang, Michelle; McManus, Brendan; Aizenberg, Joanna

    2016-01-01

    In this work, we studied the effect of the diameter of horizontal hydrophobic cylinders on droplet growth. We postulate that the concentration gradient created by natural convection around a horizontal circular cylinder is related to the droplet growth on the cylinder by condensation. We derive a simple scaling law of droplet growth and compare it with experimental results. The predicted negative exponent of drop diameter (d) as a function of cylinder diameter (D) at different time points is similar to the general trend of experimental data. Further, this effect of cylinder diameter on droplet growth is observed to be stronger than the supersaturation conditions created by different surface temperatures.

  6. Analysis of medium-BTU gasification condensates, June 1985-June 1986

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, D.C.

    1987-05-01

    This report provides the final results of chemical and physical analysis of condensates from biomass gasification systems which are part of the US Department of Energy Biomass Thermochemical Conversion Program. The work described in detail in this report involves extensive analysis of condensates from four medium-BTU gasifiers. The analyses include elemental analysis, ash, moisture, heating value, density, specific chemical analysis, ash, moisture, heating value, density, specific chemical analysis (gas chromatography/mass spectrometry, infrared spectrophotometry, Carbon-13 nuclear magnetic resonance spectrometry) and Ames Assay. This work was an extension of a broader study earlier completed of the condensates of all the gasifers and pyrolyzers in the Biomass Thermochemical Conversion Program. The analytical data demonstrates the wide range of chemical composition of the organics recoverd in the condensates and suggests a direct relationship between operating temperature and chemical composition of the condensates. A continuous pathway of thermal degradation of the tar components as a function of temperature is proposed. Variations in the chemical composition of the organic in the tars are reflected in the physical properties of tars and phase stability in relation to water in the condensate. The biological activity appears to be limited to the tars produced at high temperatures as a result of formation of polycyclic aromatic hydrocarbons in high concentrations. Future studies of the time/temperature relationship to tar composition and the effect of processing atmosphere should be undertaken. Further processing of the condensates either as wastewater treatment or upgrading of the organics to useful products is also recommended. 15 refs., 4 figs., 4 tabs.

  7. Coherence Times of Bose-Einstein Condensates beyond the Shot-Noise Limit via Superfluid Shielding

    CERN Document Server

    Burton, William Cody; Chung, Woo Chang; Vadia, Samarth; Chen, Wenlan; Ketterle, Wolfgang

    2016-01-01

    We demonstrate a new way to extend the coherence time of separated Bose-Einstein condensates that involves immersion into a superfluid bath. When both the system and the bath have similar scattering lengths, immersion in a superfluid bath cancels out inhomogeneous potentials either imposed by external fields or inherent in density fluctuations due to atomic shot noise. This effect, which we call superfluid shielding, allows for coherence lifetimes beyond the projection noise limit. We probe the coherence between separated condensates in different sites of an optical lattice by monitoring the contrast and decay of Bloch oscillations. Our technique demonstrates a new way that interactions can improve the performance of quantum devices.

  8. Synthesis of hydrocarbon fluid inclusions at low temperature

    Energy Technology Data Exchange (ETDEWEB)

    Pironon, J. (Centre de Recherche sur la Geologie de l' Uranium and GS-CNRS CREGU, Vandoeuvre-les-Nancy (France))

    Hydrocarbon fluid inclusions have been synthesized in halogenide and sulfate crystals at low temperature (<100C) and atmospheric pressure. Water-immiscible hydrocarbon droplets were either trapped separately or with an aqueous and/or a vapor phase. Impurities on the crystal surface were verified by infrared microspectrometry, and the similarity between the initial liquid and the liquid trapped in the inclusion was documented by Raman microspectrometry for nonfluorescent compounds. This inclusion type represents a new tool for understanding inclusion-formation phenomena and for the calibration of techniques used in hydrocarbon fluid-inclusion analysis ({mu}FT-IR, {mu}Raman, {mu}UV-fluorescence, gas chromatography, mass spectrometry); these inclusions allow one to obtain microthermometric calibration curves with a high precision at low temperature.

  9. Recovery of nitrogen and light hydrocarbons from polyalkene purge gas

    Science.gov (United States)

    Zwilling, Daniel Patrick; Golden, Timothy Christoph; Weist, Jr., Edward Landis; Ludwig, Keith Alan

    2003-06-10

    A method for the separation of a gas mixture comprises (a) obtaining a feed gas mixture comprising nitrogen and at least one hydrocarbon having two to six carbon atoms; (b) introducing the feed gas mixture at a temperature of about 60.degree. F. to about 105.degree. F. into an adsorbent bed containing adsorbent material which selectively adsorbs the hydrocarbon, and withdrawing from the adsorbent bed an effluent gas enriched in nitrogen; (c) discontinuing the flow of the feed gas mixture into the adsorbent bed and depressurizing the adsorbent bed by withdrawing depressurization gas therefrom; (d) purging the adsorbent bed by introducing a purge gas into the bed and withdrawing therefrom an effluent gas comprising the hydrocarbon, wherein the purge gas contains nitrogen at a concentration higher than that of the nitrogen in the feed gas mixture; (e) pressurizing the adsorbent bed by introducing pressurization gas into the bed; and (f) repeating (b) through (e) in a cyclic manner.

  10. The physics of exciton-polariton condensates

    CERN Document Server

    Lagoudakis, Konstantinos

    2013-01-01

    In 2006 researchers created the first polariton Bose-Einstein condensate at 19K in the solid state. Being inherently open quantum systems, polariton condensates open a window into the unpredictable world of physics beyond the “fifth state of matter”: the limited lifetime of polaritons renders polariton condensates out-of-equilibrium and provides a fertile test-bed for non-equilibrium physics. This book presents an experimental investigation into exciting features arising from this non-equilibrium behavior. Through careful experimentation, the author demonstrates the ability of polaritons to synchronize and create a single energy delocalized condensate. Under certain disorder and excitation conditions the complete opposite case of coexisting spatially overlapping condensates may be observed. The author provides the first demonstration of quantized vortices in polariton condensates and the first observation of fractional vortices with full phase and amplitude characterization. Finally, this book investigate...

  11. DNA condensation in one dimension

    Science.gov (United States)

    Pardatscher, Günther; Bracha, Dan; Daube, Shirley S.; Vonshak, Ohad; Simmel, Friedrich C.; Bar-Ziv, Roy H.

    2016-12-01

    DNA can be programmed to assemble into a variety of shapes and patterns on the nanoscale and can act as a template for hybrid nanostructures such as conducting wires, protein arrays and field-effect transistors. Current DNA nanostructures are typically in the sub-micrometre range, limited by the sequence space and length of the assembled strands. Here we show that on a patterned biochip, DNA chains collapse into one-dimensional (1D) fibres that are 20 nm wide and around 70 µm long, each comprising approximately 35 co-aligned chains at its cross-section. Electron beam writing on a photocleavable monolayer was used to immobilize and pattern the DNA molecules, which condense into 1D bundles in the presence of spermidine. DNA condensation can propagate and split at junctions, cross gaps and create domain walls between counterpropagating fronts. This system is inherently adept at solving probabilistic problems and was used to find the possible paths through a maze and to evaluate stochastic switching circuits. This technique could be used to propagate biological or ionic signals in combination with sequence-specific DNA nanotechnology or for gene expression in cell-free DNA compartments.

  12. Condensation induced water hammer safety

    Energy Technology Data Exchange (ETDEWEB)

    Gintner, M.A.

    1997-03-10

    Condensation induced water hammer events in piping systems can cause catastrophic steam system failures which can result in equipment damage, personal injury, and even death. As an industry, we have learned to become accustomed to the ''banging'' that we often hear in our steam piping systems, and complacent in our actions to prevent it. It is unfortunate that lives are lost needlessly, as this type of water hammer event is preventable if one only applies some basic principles when operating and maintaining their steam systems. At the U. S. Department of Energy's Hanford Site where I work, there was one such accident that occurred in 1993 which took the life of a former co-worker and friend of mine. Hanford was established as part of the Manhattan Project during World War II. it is a 560 square mile complex located along the banks of the Columbia River in Southeastern Washington State. For almost 45 years, hanford's mission was to produce weapons grade plutonium for our nations defense programs. Today, Hanford no longer produces plutonium, but is focused on site clean-up and economic diversification. Hanford still uses steam for heating and processing activities, utilizing over 20 miles of piping distribution systems similar to those found in industry. Although these aging systems are still sound, they cannot stand up to the extreme pressure pulses developed by a condensation induced water hammer.

  13. Muonic Chemistry in Condensed Matter

    CERN Multimedia

    2002-01-01

    When polarized muons (@m|+) stop in condensed matter, muonic atoms are formed in the final part of their range, and direct measurements of the @m|+-spin polarization are possible via the asymmetric decay into positrons. The hyperfine interaction determines the characteristic precession frequencies of the @m|+ spin in muonium, @w(Mu). Such frequencies can be altered by the interactions of the muonium's electron spin with the surrounding medium. The measurement of @w(Mu) in a condensed system is known often to provide unique information regarding the system. \\\\ \\\\ In particular, the use of muonium atoms as a light isotope of the simple reactive radical H|0 allows the investigation of fast reactions of radicals over a typical time scale 10|-|9~@$<$~t~@$<$~10|-|5~sec, which is determined by the instrumental resolution at one end and by the @m|+ lifetime at the other. \\\\ \\\\ In biological macromolecules transient radicals, such as the constituents of DNA itself, exist on a time scale of sub-microseconds, acco...

  14. Acute ecotoxicology of natural oil and gas condensate to coral reef larvae.

    Science.gov (United States)

    Negri, Andrew P; Brinkman, Diane L; Flores, Florita; Botté, Emmanuelle S; Jones, Ross J; Webster, Nicole S

    2016-02-19

    Risks posed by oil spills to coral reefs are difficult to evaluate, partially due to the absence of studies that adequately assess toxicity to relevant coral reef species. Here we experimentally tested the acute toxicity of condensate, representing a fraction of light crude oil, to coral (Acropora tenuis) and sponge (Rhopaloeides odorabile) larvae. The metamorphosis of coral larvae was inhibited at total petroleum aromatic hydrocarbon (TPAH) concentrations of water accommodated fractions (WAF) as low as 103 μg l(-1), similar to concentrations detected in seawater following large spills. The sensitivity of coral larvae increased by 40% when co-exposed to UV light that they might encounter in shallow reefal systems. Condensate WAF was more toxic to coral larvae than predicted by summing the toxicity of its main components (benzene, toluene, p-xylene and napthalene). In contrast, the sensitivity of sponge larvae to condensate WAF (>10,000 μg l(-1) TPAH) was far less than coral in the presence and absence of UV, but similar to that of other marine invertebrates. While these results highlight the relative sensitivity of coral larvae to oil, further research is needed to better understand and predict the impacts and risks posed by hydrocarbons to tropical reef systems.

  15. Microbial reduction of sulfate injected to gas condensate plumes in cold groundwater

    Science.gov (United States)

    Van Stempvoort, Dale R.; Armstrong, James; Mayer, Bernhard

    2007-07-01

    Despite a rapid expansion over the past decade in the reliance on intrinsic bioremediation to remediate petroleum hydrocarbon plumes in groundwater, significant research gaps remain. Although it has been demonstrated that bacterial sulfate reduction can be a key electron accepting process in many petroleum plumes, little is known about the rate of this reduction process in plumes derived from crude oil and gas condensates at cold-climate sites (mean temperature study, sulfate was injected into groundwater contaminated by gas condensate plumes at two petroleum sites in Alberta, Canada to enhance in-situ bioremediation. In both cases the groundwater near the water table had low temperature (6-9 °C). Monitoring data had provided strong evidence that bacterial sulfate reduction was a key terminal electron accepting process (TEAP) in the natural attenuation of dissolved hydrocarbons at these sites. At each site, water with approximately 2000 mg/L sulfate and a bromide tracer was injected into a low-sulfate zone within a condensate-contaminant plume. Monitoring data collected over several months yielded conservative estimates for sulfate reduction rates based on zero-order kinetics (4-6 mg/L per day) or first-order kinetics (0.003 and 0.01 day - 1 ). These results favor the applicability of in-situ bioremediation techniques in this region, under natural conditions or with enhancement via sulfate injection.

  16. Acute ecotoxicology of natural oil and gas condensate to coral reef larvae

    Science.gov (United States)

    Negri, Andrew P.; Brinkman, Diane L.; Flores, Florita; Botté, Emmanuelle S.; Jones, Ross J.; Webster, Nicole S.

    2016-02-01

    Risks posed by oil spills to coral reefs are difficult to evaluate, partially due to the absence of studies that adequately assess toxicity to relevant coral reef species. Here we experimentally tested the acute toxicity of condensate, representing a fraction of light crude oil, to coral (Acropora tenuis) and sponge (Rhopaloeides odorabile) larvae. The metamorphosis of coral larvae was inhibited at total petroleum aromatic hydrocarbon (TPAH) concentrations of water accommodated fractions (WAF) as low as 103 μg l‑1, similar to concentrations detected in seawater following large spills. The sensitivity of coral larvae increased by 40% when co-exposed to UV light that they might encounter in shallow reefal systems. Condensate WAF was more toxic to coral larvae than predicted by summing the toxicity of its main components (benzene, toluene, p-xylene and napthalene). In contrast, the sensitivity of sponge larvae to condensate WAF (>10,000 μg l‑1 TPAH) was far less than coral in the presence and absence of UV, but similar to that of other marine invertebrates. While these results highlight the relative sensitivity of coral larvae to oil, further research is needed to better understand and predict the impacts and risks posed by hydrocarbons to tropical reef systems.

  17. Structure of Nonlocal Vacuum Condensate of Quarks

    Institute of Scientific and Technical Information of China (English)

    周丽娟; 马维兴

    2003-01-01

    The Dyson-Schwinger formalism is used to derive a fully dressed quark propagator. By use of the derived form of the quark propagator, the structure of non-local quark vacuum condensate is studied, and the values of local quark vacuum condensate as well as quark gluon mixed condensate are calculated. The theoretical predictions are in good agreement with the empirical one used commonly in the literature.

  18. Ultra-low threshold polariton condensation

    CERN Document Server

    Steger, Mark; Alberi, Kirstin; Mascarenhas, Angelo; Snoke, David W; Pfeiffer, Loren N; West, Ken

    2016-01-01

    We demonstrate condensation of microcavity polaritons with a very sharp threshold occuring at two orders of magnitude lower pump intensity than previous demonstrations of condensation. The long cavity-lifetime and trapping and pumping geometries are crucial to the realization of this low threshold. Polariton condensation, or "polariton lasing" has long been proposed as a promising source of coherent light at lower threshold than traditional lasing, and these results suggest methods to bring this threshold even lower.

  19. Van der Waals Interactions and Exciton Condensation

    Science.gov (United States)

    Handel, P. H.; Kittel, C.

    1971-01-01

    It is shown that the van der Waals interaction can lead at low temperatures to a condensed state of excitons with properties in qualitative agreement with the observations of exciton droplets. Our calculation gives a binding energy of the correct sign and magnitude for the exciton condensate. In a diclectric medium, the strong enhancement of the exciton polarizability leads to a giant van der Waals interaction, and this interaction appears to make possible a condensed exciton phase. PMID:16591958

  20. Lorentz violation and Condensed Matter Physics

    CERN Document Server

    Ajaib, Muhammad Adeel

    2014-01-01

    We present heuristic arguments that hint to a possible connection of Lorentz violation with observed phenomenon in condensed matter physics. Various references from condensed matter literature are cited where operators in the Standard Model Extension (SME) appear to be enhanced. Based on this we propose that, in the non-relativistic limit, Lorentz violation in the context of the SME exhibits itself in various condensed matter systems.

  1. Enhanced condensation heat transfer with wettability patterning

    Science.gov (United States)

    Sinha Mahapatra, Pallab; Ghosh, Aritra; Ganguly, Ranjan; Megaridis, Constantine

    2015-11-01

    Condensation of water vapor on metal surfaces is useful for many engineering applications. A facile and scalable method is proposed for removing condensate from a vertical plate during dropwise condensation (DWC) in the presence of non-condensable gases (NCG). We use wettability-patterned superhydrophilic tracks (filmwise condensing domains) on a mirror-finish (hydrophilic) aluminum surface that promotes DWC. Tapered, horizontal ``collection'' tracks are laid to create a Laplace pressure driven flow, which collects condensate from the mirror-finish domains and sends it to vertical ``drainage tracks'' for gravity-induced shedding. An optimal design is achieved by changing the fractional area of superhydrophilic tracks with respect to the overall plate surface, and augmenting capillary-driven condensate-drainage by adjusting the track spatial layout. The design facilitates pump-less condensate drainage and enhances DWC heat transfer on the mirror-finish regions. The study highlights the relative influences of the promoting and retarding effects of dropwise and filmwise condensation zones on the overall heat transfer improvement on the substrate. The study demonstrated ~ 34% heat transfer improvement on Aluminum surface for the optimized design.

  2. Advances in modelling of condensation phenomena

    Energy Technology Data Exchange (ETDEWEB)

    Liu, W.S.; Zaltsgendler, E. [Ontario Hydro Nuclear, Toronto (Canada); Hanna, B. [Atomic Energy of Canada Limited, Pinawa, Manitoba (Canada)

    1997-07-01

    The physical parameters in the modelling of condensation phenomena in the CANDU reactor system codes are discussed. The experimental programs used for thermal-hydraulic code validation in the Canadian nuclear industry are briefly described. The modelling of vapour generation and in particular condensation plays a key role in modelling of postulated reactor transients. The condensation models adopted in the current state-of-the-art two-fluid CANDU reactor thermal-hydraulic system codes (CATHENA and TUF) are described. As examples of the modelling challenges faced, the simulation of a cold water injection experiment by CATHENA and the simulation of a condensation induced water hammer experiment by TUF are described.

  3. Regeneration method for condensate desalting device

    Energy Technology Data Exchange (ETDEWEB)

    Tsurumi, Takeshi; Kashimura, Makoto

    1998-09-02

    Regeneration of a condensate desalting device in a PWR type power plant is conducted by separating a mixed bed into an anion exchange resin layer and a cation exchange resin layer by back washing after stoppage of passage of water. Regeneration of an anion exchange resin layer is conducted by injecting alkali (hydrogen) carbonate such as sodium carbonate and potassium hydrogen carbonate, and extruding them with purified water and then injecting alkali hydroxide, extruding and further washing with purified water. Regeneration of a cation exchange resin layer is conducted by injecting acids such as hydrochloric acid and sulfuric acid followed by extrusion and washing. It is preferable that a liquid formed by mixing the regenerated liquid wastes of the anion exchange resin containing alkali (hydro) carbonate and regenerated liquid wastes of the cationic exchange resin containing acids and allowing generated carbon dioxide to be absorbed to alkali hydroxide is used as alkali (hydrogen) carbonate for the next regeneration. With such procedures, anion exchange resin which adsorbs decomposed products of amines can be regenerated efficiently. (I.N.)

  4. Multi-K¯ nuclei and kaon condensation

    Science.gov (United States)

    Gazda, D.; Friedman, E.; Gal, A.; Mareš, J.

    2008-04-01

    We extend previous relativistic mean-field (RMF) calculations of multi-K¯ nuclei, using vector boson fields with SU(3) PPV coupling constants and scalar boson fields constrained phenomenologically. For a given core nucleus, the resulting K¯ separation energy BK¯, as well as the associated nuclear and K¯-meson densities, saturate with the number κ of K¯ mesons for κ>κsat~10. Saturation appears robust against a wide range of variations, including the RMF nuclear model used and the type of boson fields mediating the strong interactions. Because BK¯ generally does not exceed 200 MeV, it is argued that multi-K¯ nuclei do not compete with multihyperonic nuclei in providing the ground state of strange hadronic configurations and that kaon condensation is unlikely to occur in strong-interaction self-bound strange hadronic matter. Last, we explore possibly self-bound strange systems made of neutrons and K¯0 mesons, or protons and K- mesons, and study their properties.

  5. Aerodynamically-driven condensate layer thickness distributions on isothermal cylindrical surfaces

    Science.gov (United States)

    Rosner, D. E.; Gunes, D.; Nazih-Anous, N.

    A simple yet rather general mathematical model is presented for predicting the distribution of condensate layer thickness when aerodynamic shear is the dominant mechanism of liquid flow along the surface. The Newtonian condensate film is treated using well-known thin-layer (lubrication theory) approximations, and condensate supply is taken to be the result of either convective diffusion or inertial impaction. Illustrative calculations for a circular cylinder in a crossflow at Re = 100,000 reveal the consequences of alternate condensate arrival mechanisms and the existence of thicker reverse-flow films behind the position of gas boundary-layer separation. The present formulation is readily generalized to include transient liquid layer flows on noncircular objects of variable surface temperature, as encountered in turbine-blade materials testing or operation.

  6. Review of current research on hydrocarbon production by plants

    Energy Technology Data Exchange (ETDEWEB)

    Benedict, H. M.; Inman, B.

    1979-01-01

    This review assesses the status of research and development in the area of plants that produce hydrocarbons as a possible replacement for traditional fossil fuels. The information is meant to be used as a basis for determining the scope of a possible R and D program by DOE/FFB. Except in the case of guayule (Parthenium argentatum Gray), research on hydrocarbon species generally has not advanced beyond preliminary screening, extraction, and growth studies. Virtually no field studies have been initiated; hydrocarbon component extraction, separation, identification, and characterization have been only timidly approached; the biochemistry of hydrocarbon formation remains virtually untouched; and potential market analysis has been based on insufficient data. Research interest is increasing in this area, however. Industrial interest understandably centers about guayule prospects and is supplemented by NSF and DOE research funds. Additional support for other research topics has been supplied by DOE and USDA and by certain university systems. Due to the infant state of technology in this area of energy research, it is not possible to predict or satisfactorily assess at this time the potential contribution that plant hydrocarbons might make toward decreasing the nation's dependence upon petroleum. However, the general impression received from experts interviewed during this review was that the major thrust of research should be directed toward the manufacture of petrochemical substitutes rather than fuel production.

  7. Review of current research on hydrocarbon production by plants

    Energy Technology Data Exchange (ETDEWEB)

    Benedict, H. M.; Inman, B.

    1979-01-01

    This review assesses the status of research and development in the area of plants that produce hydrocarbons as a possible replacement for traditional fossil fuels. The information is meant to be used as a basis for determining the scope of a possible R and D program by DOE/FFB. Except in the case of guayule (Parthenium argentatum Gray), research on hydrocarbon species generally has not advanced beyond preliminary screening, extraction, and growth studies. Virtually no field studies have been initiated; hydrocarbon component extraction, separation, identification, and characterization have been only timidly approached; the biochemistry of hydrocarbon formation remains virtually untouched; and potential market analysis has been based on insufficient data. Research interest is increasing in this area, however. Industrial interest understandably centers about guayule prospects and is supplemented by NSF and DOE research funds. Additional support for other research topics has been supplied by DOE and USDA and by certain university systems. Due to the infant state of technology in this area of energy research, it is not possible to predict or satisfactorily assess at this time the potential contribution that plant hydrocarbons might make toward decreasing the nation's dependence upon petroleum. However, the general impression received from experts interviewed during this review was that the major thrust of research should be directed toward the manufacture of petrochemical substitutes rather than fuel production.

  8. Hydrocarbon analysis using desorption atmospheric pressure chemical ionization

    KAUST Repository

    Jjunju, Fred Paul Mark

    2013-07-01

    Characterization of the various petroleum constituents (hydronaphthalenes, thiophenes, alkyl substituted benzenes, pyridines, fluorenes, and polycyclic aromatic hydrocarbons) was achieved under ambient conditions without sample preparation by desorption atmospheric pressure chemical ionization (DAPCI). Conditions were chosen for the DAPCI experiments to control whether ionization was by proton or electron transfer. The protonated molecule [M+H]+ and the hydride abstracted [MH]+ form were observed when using an inert gas, typically nitrogen, to direct a lightly ionized plasma generated by corona discharge onto the sample surface in air. The abundant water cluster ions generated in this experiment react with condensed-phase functionalized hydrocarbon model compounds and their mixtures at or near the sample surface. On the other hand, when naphthalene was doped into the DAPCI gas stream, its radical cation served as a charge exchange reagent, yielding molecular radical cations (M+) of the hydrocarbons. This mode of sample ionization provided mass spectra with better signal/noise ratios and without unwanted side-products. It also extended the applicability of DAPCI to petroleum constituents which could not be analyzed through proton transfer (e.g., higher molecular PAHs such as chrysene). The thermochemistry governing the individual ionization processes is discussed and a desorption/ionization mechanism is inferred. © 2012 Elsevier B.V.

  9. Hydrocarbons emissions from Cerro Prieto Geothermal Power Plant, Mexico

    Science.gov (United States)

    Navarro, Karina; Navarro-González, Rafael; de la Rosa, José; Peralta, Oscar; Castro, Telma; Imaz, Mireya

    2014-05-01

    One of the most important environmental issues related to the use of geothermal fluids to generate electricity is the emission of non-condensable gases to the atmosphere. Mexico has one of the largest geothermal plants in the world. The facility is located at Cerro Prieto, Baja California, roughly 30 km south of Mexicali and the international boundary between Mexico and United States. The Cerro Prieto power plant has 13 units grouped on four individual powerhouses. Gas samples from 9 units of the four powerhouses were collected during 4 campaigns conducted in May-July, 2010, February, 2012, December, 2012, and May, 2013. Gas samples from the stacks were collected in 1000 ml Pyrex round flasks with Teflon stopcocks, and analyzed by gas chromatography-mass spectrometry. Methane was the most abundant aliphatic hydrocarbon, with a concentration that ranged from less than 1% up to 3.5% of the total gas mixture. Normal alkanes represented the second most abundant species, and displayed a decreasing abundance with increasing carbon number in the homologous series. Isoalkanes were also present as isobutane and isopentane. Cycloalkanes occurring as cyclopentane and cyclohexane, were detected only at trace level. Unsaturated hydrocarbons (alkenes and alkynes) were not detected. Benzene was detected at levels ranging from less than 1% up to 3.4% of the total gas mixture. Other aromatic hydrocarbons detected were toluene, and xylenes, and were present at lower concentrations (

  10. The mean condensate heat resistance of dropwise condensation with flowing inert gases

    NARCIS (Netherlands)

    van der Geld, C.W.M.; Brouwers, Jos

    1995-01-01

    The quantification of the condensate heat resistance is studied for dropwise condensation from flowing air-steam mixtures. Flows are essentially laminar and stable with gas Reynolds numbers around 900 and 2000. The condensate shaping up as hemispheres on a plastic plane wall and the presence of iner

  11. The mean condensate heat resistance of dropwise condensation with flowing inert gases

    NARCIS (Netherlands)

    Geld, van der C.W.M.; Brouwers, H.J.H.

    1995-01-01

    The quantification of the condensate heat resistance is studied for dropwise condensation from flowing air-steam mixtures. Flows are essentially laminar and stable with gas Reynolds numbers around 900 and 2000. The condensate shaping up as hemispheres on a plastic plane wall and the presence of iner

  12. The mean condensate heat resistance of dropwise condensation with flowing inert gases

    NARCIS (Netherlands)

    van der Geld, C.W.M.; Brouwers, Jos

    1995-01-01

    The quantification of the condensate heat resistance is studied for dropwise condensation from flowing air-steam mixtures. Flows are essentially laminar and stable with gas Reynolds numbers around 900 and 2000. The condensate shaping up as hemispheres on a plastic plane wall and the presence of

  13. Récupération des hydrocarbures des pieds de bacs provenant de la démixtion des mélanges méthanol-supercarburant. Application du procédé de séparation par coalescence Recovery of Hydrocarbons from Bottoms of Storage Tanks Coming from the Demixing of Methanol/Premium-Gasoline Blends. Application of the Coalescence-Separation Process

    Directory of Open Access Journals (Sweden)

    Hoornaert P.

    2006-11-01

    Full Text Available Une solution technique et économique a été mise au point pour traiter les pieds de bacsprovenant de la démixtion de mélanges méthanol - supercarburant au contact de traces d'eau. Le procédé consiste à provoquer une deuxième démixtion par addition d'eau à la phase à traiter. Les hydrocarbures ainsi relargués sont séparés parfaitement en utilisant un coalesceur à résines oléophiles. Il est ainsi possible de récupérer et de recycler la quasi-totalité des hydrocarbures contenus dans lespieds de bacs . L'effluent aqueux résiduel chargé en alcool peut, soit être recyclé, soit traité par la station de traitement d'eaux de la raffinerie. A technical and economic solution has been developed for processing bottoms of storage tankscoming from the demixing of methanol/premium-gasoline blends in contact with traces of water. The process consists in producing a second demixing by the addition of water to the phase to be processed. The hydrocarbons thus salted out are effectively separated by an oleophilic-resin coalescer. In this way almost all of the hydrocarbons contained in the bottoms of storage tankscan be recovered and recycled. The residual aqueous effluent containing alcohol can either be recycled or processed by the waste-water treatment station of the refinery.

  14. Space, Time, and Tachyon Condensation

    CERN Document Server

    McInnes, B

    2006-01-01

    It has often been suggested that strings propagating on spatial sections with one or more dimensions compactified to a circle might help to resolve the initial singularity in cosmology. Assuming that Inflation occurred, it can however be shown, under extremely mild assumptions, that spatial sections having first homology groups which contain an element of infinite order actually \\emph{worsen} the singularity problem. We illustrate the force of this observation by explaining its consequences for recent ideas about winding strings and tachyon condensation as resolutions of the initial singularity. We argue that, in order to understand the initial singularity, one has to understand why the versions of de Sitter spacetime with compact flat spatial sections are themselves geodesically incomplete. To this end, we study the problem of the "twins" in these spacetimes. This study suggests that the singularity is not "resolved" but is instead made physically inaccessible.

  15. Condensation on Slippery Asymmetric Bumps

    CERN Document Server

    Park, Kyoo-Chul; He, Neil; Aizenberg, Joanna

    2015-01-01

    Bumps are omnipresent from human skin to the geological structures on planets, which offer distinct advantages in numerous phenomena including structural color, drag reduction, and extreme wettability. Although the topographical parameters of bumps such as radius of curvature of convex regions significantly influence various phenomena including anti-reflective structures and contact time of impacting droplets, the effect of the detailed bump topography on growth and transport of condensates have not been clearly understood. Inspired by the millimetric bumps of the Namib Desert beetle, here we report the identified role of radius of curvature and width of bumps with homogeneous surface wettability in growth rate, coalescence and transport of water droplets. Further rational design of asymmetric convex topography and synergetic combination with slippery coating simultaneously enable self-transport, leading to unseen five-fold higher growth rate and an order of magnitude faster shedding time of droplets compared...

  16. Hydrocarbon Leak Detection Sensor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — FTT is proposing the development of a sensor to detect the presence of hydrocarbons in turbopump Inter-Propellant Seals (IPS). The purpose of the IPS is to prevent...

  17. Growth of hydrocarbon utilizing microorganisms

    Digital Repository Service at National Institute of Oceanography (India)

    Bhosle, N.B.; Mavinkurve, S.

    Two isolates from marine mud having broad spectrum hydrocarbon utilizing profile were identified as Arthrobacter simplex and Candida tropicalis.Both the organisms grew exponentially on crude oil. The cell yield of the organisms was influenced...

  18. Statistical physics and condensed matter

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    This document is divided into 4 sections: 1) General aspects of statistical physics. The themes include: possible geometrical structures of thermodynamics, the thermodynamical foundation of quantum measurement, transport phenomena (kinetic theory, hydrodynamics and turbulence) and out of equilibrium systems (stochastic dynamics and turbulence). The techniques involved here are typical of applied analysis: stability criteria, mode decomposition, shocks and stochastic equations. 2) Disordered, glassy and granular systems: statics and dynamics. The complexity of the systems can be studied through the structure of their phase space. The geometry of this phase space is studied in several works: the overlap distribution can now be computed with a very high precision; the boundary energy between low lying states does not behave like in ordinary systems; and the Edward's hypothesis of equi-probability of low lying metastable states is invalidated. The phenomenon of aging, characteristic of glassy dynamics, is studied in several models. Dynamics of biological systems or of fracture is shown to bear some resemblance with that of disordered systems. 3) Quantum systems. The themes include: mesoscopic superconductors, supersymmetric approach to strongly correlated electrons, quantum criticality and heavy fermion compounds, optical sum rule violation in the cuprates, heat capacity of lattice spin models from high-temperature series expansion, Lieb-Schultz-Mattis theorem in dimension larger than one, quantum Hall effect, Bose-Einstein condensation and multiple-spin exchange model on the triangular lattice. 4) Soft condensed matter and biological systems. Path integral representations are invaluable to describe polymers, proteins and self-avoiding membranes. Using these methods, problems as diverse as the titration of a weak poly-acid by a strong base, the denaturation transition of DNA or bridge-hopping in conducting polymers have been addressed. The problems of RNA folding

  19. Condensed Matter Theories - Volume 22

    Science.gov (United States)

    Reinholz, Heidi; Röpke, Gerd; de Llano, Manuel

    2007-09-01

    pt. A. Fermi liquids. Pressure comparison between the spherical cellular model and the Thomas-Fermi model / G.A. Baker, Jr. Pair excitations and vertex corrections in Fermi fluids and the dynamic structure function of two-dimension 3He / H.M. Böhm, H. Godfrin, E. Krotscheck, H.J. Lauter, M. Meschke and M. Panholzer. Condensation of helium in wedges / E.S. Hernádez ... [et al.]. Non-Fermi liquid behavior from the Fermi-liquid approach / V.A. Khodel ... [et al.]. Theory of third sound and stability of thin 3He-4He superfluid films / E. Krotscheck and M.D. Miller. Pairing in asymmetrical Fermi systems / K.F. Quader and R. Liao. Ground-state properties of small 3He drops from quantum Monte Carlo simulations / E. Sola, J. Casulleras and J. Boronat. Ground-state energy and compressibility of a disordered two-dimensional electron gas / Tanatar ... [et al.]. Quasiexcitons in photoluminescence of incompressible quantum liquids / A. Wójs, A.G ladysiewicz and J.J. Quinn -- pt. B. Bose liquids. Quantum Boltzmann liquids / K.A. Gernoth, M L. Ristig and T. Lindenau. Condensate fraction in the dynamic structure function of Bose fluids / M. Saarela, F. Mazzanti and V. Apaja -- pt. C. Strongly-correlated electronic systems. Electron gas in high-field nanoscopic transport: metallic carbon nanotubes / F. Green and D. Neilson. Evolution and destruction of the Kondo effect in a capacitively coupled double dot system / D.E. Logan and M.R. Galpin. The method of increments-a wavefunction-based Ab-Initio correlation method for solids / B. Paulus. Fractionally charged excitations on frustrated lattices / E. Runge, F. Pollmann and P. Fulde. 5f Electrons in actinides: dual nature and photoemission spectra / G. Zwicknagl -- pt. D. Magnetism. Magnetism in disordered two-dimensional Kondo-Necklace / W. Brenig. On the de Haas-can Alphen oscillation in 2D / S. Fujita and D.L. Morabito. Dynamics in one-dimensional spin systems-density matrix reformalization group study / S. Nishimoto and M

  20. Bioassay of polycyclic aromatic hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Van Kirk, E.A.

    1980-08-01

    A positive relationship was found between the photodynamic activity of 24 polycyclic aromatic hydrocarbons versus published results on the mutagenicity, carcinogenicity, and initiation of unscheduled DNA synthesis. Metabolic activation of benzo(a)pyrene resulted in detection of increased mutagenesis in Paramecium tetraurelia as found also in the Ames Salmonella assay. The utility of P. tetraurelia as a biological detector of hazardous polycyclic aromatic hydrocarbons is discussed.

  1. Electrochemical decomposition of chlorinated hydrocarbons

    OpenAIRE

    McGee, Gerard Anthony

    1993-01-01

    This work involves the characterisation of the electrochemical decomposition of chlorinated hydrocarbons. A variety of methods were employed involving the use of catalytic reagents to enhance the rate at which chlorinated organic compounds are reduced. The first reagent used was oxygen which was electrochemically reduced to superoxide in nonaqueous solvents. Superoxide is a reactive intermediate and decomposes chlorinated hydrocarbons. However it was found that since the rate of reaction betw...

  2. Aliphatic hydrocarbons of the fungi.

    Science.gov (United States)

    Weete, J. D.

    1972-01-01

    Review of studies of aliphatic hydrocarbons which have been recently detected in the spores of phytopathogenic fungi, and are found to be structurally very similar to the alkanes of higher plants. It appears that the hydrocarbon components of the few mycelial and yeast forms reported resemble the distribution found in bacteria. The occurence and distribution of these compounds in the fungi is discussed. Suggested functional roles of fungal spore alkanes are presented.

  3. LIQUID HYDROCARBON FUEL CELL DEVELOPMENT.

    Science.gov (United States)

    A compound anode consists of a reforming catalyst bed in direct contact with a palladium-silver fuel cell anode. The objective of this study was to...prove the feasibility of operating a compound anode fuel cell on a liquid hydrocarbon and to define the important parameters that influence cell...performance. Both reformer and fuel cell tests were conducted with various liquid hydrocarbon fuels. Included in this report is a description of the

  4. Assessment of the controllability of condensible emissions. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Shareef, G.S.; Waddell, J.T.

    1990-10-01

    The report gives results of a study to gain insights into the condensible emissions area from an air toxics perspective, with emphasis on controllability and chemical composition of these emissions. The study: compiled existing data on condensible emissions; determined the chemical composition of condensible emissions, where possible; identified source categories that are major emitters of condensibles; evaluated the effectiveness of various control devices in reducing condensible emissions; and evaluated how the performance of currently available control technologies can be improved to better control condensible emissions. Two data bases were developed: the Condensibles Data Base contains 43 emission source categories; the Specialized Condensibles Data Base focuses on the chemical composition of condensible emissions.

  5. Genetic features of gas-condensate reservoirs in the Kekeya Field,southwest depression in the Tarim Basin,China

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Oils,condensates and natural gases in the Kekeya Field,southeast depression of the Tarim Basin were studied for their geochemical characteristics. According to the distribution analysis of the C2/C3 values with C1/C2 values,C2/C3 values with C1/C3 values,as well as C2/C3 values with dryness index,there are two different types of natural gases in the studied field,which are spatially regularly distributed. One is the oil cracking gas,located on shallow reservoirs over X52 reservoir,namely Upper oil legs;the other is kerogen cracking gas,located on X72 reservoirs,X8 reservoirs and E2k reservoirs,namely Lower oil legs. In addition,the distribution patterns of molar concentration of oils and condensates with different carbon numbers of the n-alkanes in the Kekeya Field indicate that the crude oils have experienced several kinds of secondary alterations,which were closely related to the charging of gaseous hydrocarbons after petroleum accumulation. These results indicate that,based on the research of δ13C values of individual hydrocarbons,heptane values and isoheptane values of light hydrocarbons and aromatic maturity parameters for oils,condensates and natural gases,oils and gases were charged at different geological time in the Kekeya Field.

  6. Computational Modeling and Simulation of Film-Condensation

    Science.gov (United States)

    2013-01-18

    Two different problems are simulated and analyzed, discussed below in separate subsections. 3.1. CFD Analysis of Film Condensation on the underside...ndergo trans 1981; Hu and iterature. The egimes and t ion is shown n. Saturated v h wets the un vity and surf por. This can ier fluid sits th at which λd...configuratio own in Fig ditions; corre s the veloci all, the surf ump across t ilibrium. As main at satur al BCs are ap t ) and sub c exists a dif ich leads to

  7. Non minimally coupled condensate cosmologies: a phase space analysis

    CERN Document Server

    Carloni, Sante; Cianci, Roberto

    2014-01-01

    We present an analysis of the phase space of cosmological models based on a non minimal coupling between the geometry and a fermionic condensate. We obtain that the strong constraint coming from the Dirac equations allows a detailed design of the cosmology of these models and at the same time guarantees an evolution towards a state indistinguishable from General Relativistic cosmological models. In this light, we show how the use of some specific potentials is able to reproduce naturally two de Sitter phases separated by a power law expansion which could be an interesting model for the unification of an inflationary phase and a dark energy era.

  8. Thermodynamic Analysis of Hydrocarbon Refrigerants-Based Ethylene BOG Re-liquefaction System

    Institute of Scientific and Technical Information of China (English)

    Boumedienne M Beladjine; Ahmed Ouadha; and Yacine Addad

    2016-01-01

    The present study aims to make a thermodynamic analysis of an ethylene cascade re-liquefaction system that consists of the following two subsystems: a liquefaction cycle using ethylene as the working fluid and a refrigeration cycle operating with a hydrocarbon refrigerant. The hydrocarbon refrigerants considered are propane (R290), butane (R600), isobutane (R600a), and propylene (R1270). A computer program written in FORTRAN is developed to compute parameters for characteristic points of the cycles and the system’s performance, which is determined and analyzed using numerical solutions for the refrigerant condensation temperature, temperature in tank, and temperature difference in the cascade condenser. Results show that R600a gives the best performance, followed by (in order) R600, R290, and R1270. Furthermore, it is found that an increase in tank temperature improves system performance but that an increase in refrigerant condensation temperature causes deterioration. In addition, it is found that running the system at a low temperature difference in the cascade condenser is advantageous.

  9. Thermodynamic analysis of hydrocarbon refrigerants-based ethylene BOG re-liquefaction system

    Science.gov (United States)

    Beladjine, Boumedienne M.; Ouadha, Ahmed; Addad, Yacine

    2016-09-01

    The present study aims to make a thermodynamic analysis of an ethylene cascade re-liquefaction system that consists of the following two subsystems: a liquefaction cycle using ethylene as the working fluid and a refrigeration cycle operating with a hydrocarbon refrigerant. The hydrocarbon refrigerants considered are propane (R290), butane (R600), isobutane (R600a), and propylene (R1270). A computer program written in FORTRAN is developed to compute parameters for characteristic points of the cycles and the system's performance, which is determined and analyzed using numerical solutions for the refrigerant condensation temperature, temperature in tank, and temperature difference in the cascade condenser. Results show that R600a gives the best performance, followed by (in order) R600, R290, and R1270. Furthermore, it is found that an increase in tank temperature improves system performance but that an increase in refrigerant condensation temperature causes deterioration. In addition, it is found that running the system at a low temperature difference in the cascade condenser is advantageous.

  10. HYDROCARBONS RESERVES IN VENEZUELA

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Cruz, D.J.

    2007-07-01

    Venezuela is an important player in the energy world, because of its hydrocarbons reserves. The process for calculating oil and associated gas reserves is described bearing in mind that 90% of the gas reserves of Venezuela are associated to oil. Likewise, an analysis is made of the oil reserves figures from 1975 to 2003. Reference is also made to inconsistencies found by international experts and the explanations offered in this respect by the Ministry of Energy and Petroleum (MENPET) and Petroleos de Venezuela (PDVSA) regarding the changes that took place in the 1980s. In turn, Hubbert's Law is explained to determine peak production of conventional oil that a reservoir or field will reach, as well as its relationship with remaining reserves. Emphasis is placed on the interest of the United Nations on this topic. The reserves of associated gas are presented along with their relationship with the different crude oils that are produced and with injected gas, as well as with respect to the possible changes that would take place in the latter if oil reserves are revised. Some recommendations are submitted so that the MENPET starts preparing the pertinent policies ruling reserves. (auth)

  11. Evaluation of hydrocarbon potential

    Energy Technology Data Exchange (ETDEWEB)

    Cashman, P.H.; Trexler, J.H. Jr. [Univ. of Nevada, Reno, NV (United States)

    1992-09-30

    Task 8 is responsible for assessing the hydrocarbon potential of the Yucca Mountain vincinity. Our main focus is source rock stratigraphy in the NTS area in southern Nevada. (In addition, Trexler continues to work on a parallel study of source rock stratigraphy in the oil-producing region of east central Nevada, but this work is not funded by Task 8.) As a supplement to the stratigraphic studies, we are studying the geometry and kinematics of deformation at NTS, particularly as these pertain to reconstructing Paleozoic stratigraphy and to predicting the nature of the Late Paleozoic rocks under Yucca Mountain. Our stratigraphic studies continue to support the interpretation that rocks mapped as the {open_quotes}Eleana Formation{close_quotes} are in fact parts of two different Mississippian units. We have made significant progress in determining the basin histories of both units. These place important constraints on regional paleogeographic and tectonic reconstructions. In addition to continued work on the Eleana, we plan to look at the overlying Tippipah Limestone. Preliminary TOC and maturation data indicate that this may be another potential source rock.

  12. Soliton resonance in bose-einstein condensate

    Science.gov (United States)

    Zak, Michail; Kulikov, I.

    2002-01-01

    A new phenomenon in nonlinear dispersive systems, including a Bose-Einstein Condensate (BEC), has been described. It is based upon a resonance between an externally induced soliton and 'eigen-solitons' of the homogeneous cubic Schrodinger equation. There have been shown that a moving source of positive /negative potential induces bright /dark solitons in an attractive / repulsive Bose condensate.

  13. ASSESSMENT OF THE CONTROLLABILITY OF CONDENSIBLE EMISSIONS

    Science.gov (United States)

    The report gives results of a study to gain insights into the condensible emissions area from an air toxics perspective, with emphasis on controllability and chemical composition of these emissions. he study compiled existing data on condensible emissions; determined the chemical...

  14. Phase contrast imaging of Bose condensed clouds

    NARCIS (Netherlands)

    Meppelink, R; Rozendaal, R.A.; Koller, S.B.; Vogels, J.M.; van der Straten, P.

    2010-01-01

    Phase contrast imaging is used to observe Bose-Einstein condensates (BECs) at finite temperature in situ. The imaging technique is used to accurately derive the absolute phase shift of a probe laser beam due to both the condensate and the thermal cloud. The accuracy of the method is enhanced by usin

  15. Bose-Einstein condensation of atomic hydrogen

    NARCIS (Netherlands)

    Willmann, L

    1999-01-01

    The recent creation of a Bose-Einstein condensate of atomic hydrogen has added a new system to this exciting field, The differences between hydrogen and the alkali metal atoms require other techniques for the initial trapping and cooling of the atoms and the subsequent detection of the condensate. T

  16. Hydrophilic structures for condensation management in appliances

    Science.gov (United States)

    Kuehl, Steven John; Vonderhaar, John J.; Wu, Guolian; Wu, Mianxue

    2016-02-02

    An appliance that includes a cabinet having an exterior surface; a refrigeration compartment located within the cabinet; and a hydrophilic structure disposed on the exterior surface. The hydrophilic structure is configured to spread condensation. The appliance further includes a wicking structure located in proximity to the hydrophilic structure, and the wicking structure is configured to receive the condensation.

  17. Investigation of Condensing Ice Heat Exchangers for MTSA Technology Development

    Science.gov (United States)

    Padilla, Sebastian; Powers, Aaron; Ball, Tyler; Lacomini, Christie; Paul, Heather L.

    2009-01-01

    Metabolic heat regenerated Temperature Swing Adsorption (MTSA) technology is being developed for thermal, carbon dioxide (CO2) and humidity control for a Portable Life Support Subsystem (PLSS). Metabolically-produced CO2 present in the ventilation gas of a PLSS is collected using a CO2-selective adsorbent via temperature swing adsorption. The temperature swing is initiated through cooling to well below metabolic temperatures. Cooling is achieved with a sublimation heat exchanger using water or liquid carbon dioxide (L CO2) expanded below sublimation temperature when exposed to low pressure or vacuum. Subsequent super heated vapor, as well as additional coolant, is used to further cool the astronaut. The temperature swing on the adsorbent is then completed by warming the adsorbent with a separate condensing ice heat exchanger (CIHX) using metabolic heat from moist ventilation gas. The condensed humidity in the ventilation gas is recycled at the habitat. The water condensation from the ventilation gas represents a significant source of potential energy for the warming of the adsorbent bed as it represents as much as half of the energy potential in the moist ventilation gas. Designing a heat exchanger to efficiently transfer this energy to the adsorbent bed and allow the collection of the water is a challenge since the CIHX will operate in a temperature range from 210K to 280K. The ventilation gas moisture will first freeze and then thaw, sometimes existing in three phases simultaneously.

  18. Determination of low concentrations of aromatic hydrocarbons in multicomponent mixtures with iso-octane and n-heptane

    Science.gov (United States)

    Vesnin, V. L.; Muradov, V. G.

    2011-11-01

    We have experimentally studied the absorption spectra of hydrocarbon mixtures based on n-heptane and isooctane with small (1%-2%) additions of aromatic hydrocarbons (benzene, toluene, xylene). The study was conducted in the region of the first overtones of the vibrational spectra for the hydrocarbon groups CH3, CH2, CH. We show that four-component modeling of the absorption spectrum of the hydrocarbon mixture and minimization of the deviation of the model spectrum from the experimental spectrum allow us to separately determine the content of the aromatic additives for concentrations from 1%.

  19. Gravitino condensation, supersymmetry breaking and inflation

    CERN Document Server

    Houston, N

    2015-01-01

    Motivated by dualistic considerations of the reality of quark condensation in quantum chromodynamics, and the connections of supergravity to the exotic physics of string and M-theory, in this thesis we investigate the dynamical breaking of local supersymmetry via gravitino condensation. We firstly demonstrate non-perturbative gravitino mass generation via this mechanism in flat spacetime, and from this derive the condensate mode wavefunction renormalisation. By then calculating the full canonically normalised one-loop effective potential for the condensate mode about a de Sitter background, we demonstrate that, contrary to claims in the literature, this process may both occur and function in a phenomenologically viable manner. In particular, we find that outside of certain unfortunate gauge choices, the stability of the condensate is intimately tied via gravitational degrees of freedom to the sign of the tree-level cosmological constant. Furthermore, we find that the energy density liberated may provide the n...

  20. When does lasing become a condensation phenomenon?

    CERN Document Server

    Fischer, Baruch

    2012-01-01

    We present a generic classical light condensation (LC) phenomenon in linear photonic mode systems, such as cw laser cavities, in a noisy environment (spontaneous emission, etc.), based on weighting the modes in a loss-gain scale rather than in photon energy. It is characterized by a sharp transition from multi- to single-mode oscillation. The study uses a linear multivariate Langevin formulation which gives a mode occupation hierarchy that functions like Bose-Einstein statistics. We find that condensation occurs when the spectral filtering has near the lowest loss mode a power law dependence with exponent smaller than 1. We then discuss how and when condensation occurs in photon systems, how it relates to lasing, and the difficulties to observe regular photon Bose-Einstein condensation (BEC) in laser cavities. We raise the possibility that recent experiments on photon condensation in optical cavities fall in a classical LC or lasing category rather than being a thermal-quantum BEC phenomenon.

  1. Technical and economic feasibility of soil flushing with non-ionic surfactant to remediate gas well condensate

    Energy Technology Data Exchange (ETDEWEB)

    Felske, D.; Morton, P.R. [EBA Engineering Consultants Ltd., Calgary, AB (Canada)

    2005-07-01

    The results of a feasibility study to assess the technical and economic viability of remediating condensate-impacted soils surrounding a main gas pipeline in northern Alberta by in situ flushing with non-ionic surfactant were presented. A commercially available non-ionic surfactant was evaluated for its solubility increasing properties as an economic means of solubilizing soil-bonded condensate. An injection-recovery well configuration was situated within the condensate spill pathway and was selected for a series of inter-well tests using surfactant injection and its recovery from a nearby pumped recovery well. Sodium bromide was used as a conservative tracer to assist in the selection of surfactant and solubilized hydrocarbon samples from the recovery well for laboratory analysis. Surfactant, hydrocarbon and tracer breakthrough curves were plotted for the recovered groundwater. Results enabled the quantification of surfactant effects on recovered groundwater. Findings demonstrated that the non-ionic surfactant achieved a significant solubilization and soil remediation of condensate at a more economic rate than bioventing, biosparging or soil vapour extraction when considered over the projected time, and attained all regulatory soil and groundwater quality remediation objectives.

  2. The migration fractionation: an important mechanism in the formation of condensate and waxy oil

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Fault-initiated pressure release within reservoirs and the injection of external excessive dry gas may result in occurrence of oil and gas phases. Because of different partitioning coefficients of compounds in two phase flow, lower-molecular-weight components are easier to dissolve in gas phase, yielding condensates, while higher-molecular-weight components are retained in the oil phase, yielding waxy oil cumulations. The fractionation process causes extensive compositional variability in aliphatic/aromatic hydrocarbon ratios, molecular compound distributions and carbon isotope ratios that are traditionally considered to be related to the source organic matter or the thermal maturity.

  3. Assessment of GOTHIC and TRACE codes against selected PANDA experiments on a Passive Containment Condenser

    Energy Technology Data Exchange (ETDEWEB)

    Papini, Davide, E-mail: davide.papini@psi.ch; Adamsson, Carl; Andreani, Michele; Prasser, Horst-Michael

    2014-10-15

    Highlights: • Code comparison on the performance of a Passive Containment Condenser. • Simulation of separate effect tests with pure steam and non-condensable gases. • Role of the secondary side and accuracy of pool boiling models are discussed. • GOTHIC and TRACE predict the experimental performance with slight underestimation. • Recirculatory flow pattern with injection of light non-condensable gas is inferred. - Abstract: Typical passive safety systems for ALWRs (Advanced Light Water Reactors) rely on the condensation of steam to remove the decay heat from the core or the containment. In the present paper the three-dimensional containment code GOTHIC and the one-dimensional system code TRACE are compared on the calculation of a variety of phenomena characterizing the response of a passive condenser submerged in a boiling pool. The investigation addresses the conditions of interest for the Passive Containment Cooling System (PCCS) proposed for the ESBWR (Economic Simplified Boiling Water Reactor). The analysis of selected separate effect tests carried out on a PCC (Passive Containment Condenser) unit in the PANDA large-scale thermal-hydraulic facility is presented to assess the code predictions. Both pure steam conditions (operating pressure of 3 bar, 6 bar and 9 bar) and the effect on the condensation heat transfer of non-condensable gases heavier than steam (air) and lighter than steam (helium) are considered. The role of the secondary side (pool side) heat transfer on the condenser performance is examined too. In general, this study shows that both the GOTHIC and TRACE codes are able to reasonably predict the heat transfer capability of the PCC as well as the influence of non-condensable gas on the system. A slight underestimation of the condenser performance is obtained with both codes. For those tests where the experimental and simulated efficiencies agree better the possibility of compensating errors among different parts of the heat transfer

  4. The presence of pollutant hydrocarbons in estuarine epipelic diatom populations. II. Diatom slimes

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, S.; Eglinton, G.

    1979-01-01

    Diatom slime in sediment from the Severn intertidal estuary was analyzed for polycyclic aromatic hydrocarbons (PAH's) and aliphatic hydrocarbons, using computerized capillary gas chromatography/mass spectrometry. The distributions of these substances in diatoms were compared with those in the underlying sediment and in a sediment-free diatom population. Aliphatic hydrocarbon distribution in slime was about the same as that of separated diatoms and sediment, while PAH distribution in slime was about that of the sediment alone. These results suggest a loss of PAH's from the coalesced sediment in the slime, probably either by a photo-oxidative or catabolic process. 34 references, 2 tables.

  5. Methods of producing alkylated hydrocarbons from an in situ heat treatment process liquid

    Science.gov (United States)

    Roes, Augustinus Wilhelmus Maria; Mo, Weijian; Muylle, Michel Serge Marie; Mandema, Remco Hugo; Nair, Vijay

    2009-09-01

    A method for producing alkylated hydrocarbons is disclosed. Formation fluid is produced from a subsurface in situ heat treatment process. The formation fluid is separated to produce a liquid stream and a first gas stream. The first gas stream includes olefins. The liquid stream is fractionated to produce at least a second gas stream including hydrocarbons having a carbon number of at least 3. The first gas stream and the second gas stream are introduced into an alkylation unit to produce alkylated hydrocarbons. At least a portion of the olefins in the first gas stream enhance alkylation.

  6. Polycyclic Aromatic Hydrocarbons

    Science.gov (United States)

    Salama, Farid

    2010-01-01

    Carbonaceous materials play an important role in space. Polycyclic Aromatic Hydrocarbons (PAHs) are a ubiquitous component of the carbonaceous materials. PAHs are the best-known candidates to account for the IR emission bands. They are also thought to be among the carriers of the diffuse interstellar absorption bands (DIBs). PAH ionization states reflect the ionization balance of the medium while PAH size, composition, and structure reflect the energetic and chemical history of the medium. A major challenge is to reproduce in the laboratory the physical conditions that exist in the emission and absorption interstellar zones. The harsh physical conditions of the ISM -low temperature, collisionless, strong UV radiation fields- are simulated in the laboratory by associating a molecular beam with an ionizing discharge to generate a cold plasma expansion. PAH ions and radicals are formed from the neutral precursors in an isolated environment at low temperature and probed with high-sensitivity cavity ringdown spectroscopy in the NUV-NIR range. Carbon nanoparticles are also formed during the short residence time of the precursors in the plasma and are characterized with time-offlight mass spectrometry. These experiments provide unique information on the spectra of large carbonaceous molecules and ions in the gas phase that can now be directly compared to interstellar and circumstellar observations (IR emission bands, DIBs, extinction curve). These findings also hold great potential for understanding the formation process of interstellar carbonaceous grains. We will review recent progress in the experimental and theoretical studies of PAHs, compare the laboratory data with astronomical observations and discuss the global implications.

  7. Synergistic inhibition of Haemonchus contortus exsheathment by flavonoid monomers and condensed tannins

    DEFF Research Database (Denmark)

    Klongsiriwet, Chaweewan; Quijada, Jessica; Williams, Andrew Richard;

    2015-01-01

    This study investigated the separate and combined anthelmintic (AH) effects of different phenolic compounds, including condensed tannins and flavonoids, all of which are known to occur in willow leaves, a potentially valuable dry season feed. A range of contrasting model tannins, which span the w...

  8. Analysis of siloxanes in hydrocarbon mixtures using comprehensive two-dimensional gas chromatography.

    Science.gov (United States)

    Ghosh, Abhijit; Seeley, Stacy K; Nartker, Steven R; Seeley, John V

    2014-09-19

    A comprehensive two-dimensional gas chromatography (GC×GC) method for separating siloxanes from hydrocarbons has been developed using a systematic process. First, the retention indices of a set of siloxanes and a set of hydrocarbons were determined on 6 different stationary phases. The retention indices were then used to model GC×GC separation on 15 different stationary phase pairs. The SPB-Octyl×DB-1 pair was predicted to provide the best separation of the siloxanes from the hydrocarbons. The efficacy of this stationary phase pair was experimentally tested by performing a GC×GC analysis of gasoline spiked with siloxanes and by analyzing biogas obtained from a local wastewater treatment facility. The model predictions agreed well with the experimental results. The SPB-Octyl×DB-1 stationary phase pair constrained the hydrocarbons to a narrow range of secondary retention times and fully isolated the siloxanes from the hydrocarbon band. The resulting GC×GC method allows siloxanes to be resolved from complex mixtures of hydrocarbons without requiring the use of a selective detector.

  9. Direct contact condensation in packed beds

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yi; Klausner, James F.; Mei, Renwei; Knight, Jessica [Department of Mechanical and Aerospace Engineering, University of Florida, Gainesville, FL 32611 (United States)

    2006-12-15

    A diffusion driven desalination process was recently described where a very effective direct contact condenser with a packed bed is used to condense water vapor out of an air/vapor mixture. A laboratory scale direct contact condenser has been fabricated as a twin tower structure with two stages, co-current and countercurrent. Experiments have been operated in each stage with respective saturated air inlet temperatures of 36, 40 and 43{sup o}C. The temperature and humidity data have been collected at the inlet and exit of the packed bed for different water to air mass flow ratios that vary between 0 and 2.5. A one-dimensional model based on conservation principles has been developed, which predicts the variation of temperature, humidity, and condensation rate through the condenser stages. Agreement between the model and experiments is very good. It is observed that the countercurrent flow stage condensation effectiveness is significantly higher than that for the co-current stage. The condensation heat and mass transfer rates were found to decrease when water blockages occur within the packed bed. Using high-speed digital cinematography, it was observed that this problem can occur at any operating condition, and is dependent on the packing surface wetting characteristics. This observation is used to explain the requirement for two different empirical constants, depending on packing diameter, suggested by Onda for the air side mass transfer coefficient correlation. (author)

  10. Dispensing fuel with aspiration of condensed vapors

    Energy Technology Data Exchange (ETDEWEB)

    Butkovich, M.S.; Strock, D.J.

    1993-08-10

    A vapor recovery process is described, comprising the steps of: fueling a motor vehicle with gasoline by discharging gasoline into a fill opening or filler pipe of a tank of said vehicle through a fuel outlet conduit of a nozzle; emitting gasoline vapors from said tank during said fueling; substantially collecting said vapors during said fueling with a vapor return conduit of said nozzle and passing said vapors through said vapor return conduit in counter current flow relationship to said discharging gasoline in said fuel conduit; conveying said vapors from said vapor return conduit to a vapor return hose; at least some of said vapors condensing to form condensate in said vapor return hose; substantially removing said condensate from said vapor return hose during said fueling with a condensate pickup tube from said nozzle by passing said condensate through said condensate pickup tube in counter current flow relationship to said conveying vapors in said vapor return hose; sensing the presence of gasoline with a liquid sensing tube in said vapor return conduit of said nozzle between inner and outer spouts of said nozzle to detect when said tank of said vehicle is filled with said fuel conduit being within the inner spout of said nozzle; and automatically shutting off said fueling and condensate removing when said liquid sensing tube detects when said tank of said vehicle is filled and fuel enters said vapor return conduit.

  11. Enhancing dropwise condensation through bioinspired wettability patterning.

    Science.gov (United States)

    Ghosh, Aritra; Beaini, Sara; Zhang, Bong June; Ganguly, Ranjan; Megaridis, Constantine M

    2014-11-01

    Dropwise condensation (DWC) heat transfer depends strongly on the maximum diameter (Dmax) of condensate droplets departing from the condenser surface. This study presents a facile technique implemented to gain control of Dmax in DWC within vapor/air atmospheres. We demonstrate how this approach can enhance the corresponding heat transfer rate by harnessing the capillary forces in the removal of the condensate from the surface. We examine various hydrophilic-superhydrophilic patterns, which, respectively, sustain and combine DWC and filmwise condensation on the substrate. The material system uses laser-patterned masking and chemical etching to achieve the desired wettability contrast and does not employ any hydrophobizing agent. By applying alternating straight parallel strips of hydrophilic (contact angle ∼78°) mirror-finish aluminum and superhydrophilic regions (etched aluminum) on the condensing surface, we show that the average maximum droplet size on the less-wettable domains is nearly 42% of the width of the corresponding strips. An overall improvement in the condensate collection rate, up to 19% (as compared to the control case of DWC on mirror-finish aluminum) was achieved by using an interdigitated superhydrophilic track pattern (on the mirror-finish hydrophilic surface) inspired by the vein network of plant leaves. The bioinspired interdigitated pattern is found to outperform the straight hydrophilic-superhydrophilic pattern design, particularly under higher humidity conditions in the presence of noncondensable gases (NCG), a condition that is more challenging for maintaining sustained DWC.

  12. Dynamics of condensation on lubricant impregnated surfaces

    Science.gov (United States)

    Anand, Sushant; Paxson, Adam; Rykaczewski, Konrad; Beysens, Daniel; Varanasi, Kripa

    2013-03-01

    Replacing the filmwise condensation mode with dropwise condensation promises large improvements in heat transfer that will lead to large cost savings in material, water consumption and decreased size of the systems. In this regards, use of superhydrophobic surfaces fabricated by texturing surfaces with nano/microstructures has been shown to lead decrease in contact line pinning of millimetric drops resulting in fast shedding. However, these useful properties are lost during condensation where droplets that nucleate within texture grow by virtue of condensation to large sized droplets while still adhering to the surface. Recently we have shown that liquid impregnated surfaces can overcome many limitations of conventional superhydrophobic surfaces during condensation. Here we discuss aspects related to condensation on lubricant surfaces, such as behavior of growing droplets. We compare the characteristics of droplets condensing on these surfaces with their behavior on conventional un-impregnated superhydrophobic surfaces and show how use of lubricant impregnated surfaces may lead to large enhancement in heat transfer and energy efficiencies.

  13. Fouling computations for optimized condenser cleaning

    Energy Technology Data Exchange (ETDEWEB)

    Wolff, P.J.; March, P.A. [Tennessee Valley Authority, Norris, TN (United States)

    1996-08-01

    Condenser tests are typically performed to evaluate water side fouling levels. Because the water side fouling level is independent of condenser operating conditions, fouling levels determined from a condenser test should also be independent of condenser operating conditions. This study investigates the effect of inlet cooling water temperature on fouling levels computed with an empirical relation presented in the Heat Exchange Institute (HEI) Standard and with the resistance-summation method. These two methods are compared with a simplified mathematical model of a condenser and with actual test data. The comparisons show that the fouling and fouling rate computed by the HEI method are significantly lower than the resistance-summation method for cold condenser circulating water inlet temperatures. The significance of the deviation in fouling rates is then evaluated within the context of an optimized condenser cleaning schedule to determine differences in cleaning schedules and the associated dollar costs of basing cleaning decisions on each of the two methods. 11 refs., 11 figs.

  14. Silicate condensation in Mira variables

    CERN Document Server

    Gail, Hans-Peter; Pucci, Annemarie

    2016-01-01

    We study whether the condensation of silicate dust in Mira envelopes could be caused by cluster formation by the abundant SiO molecules. For a simplified model of the pulsational motions of matter in the the outer layers of a Mira variable which is guided by a numerical model for Mira pulsations, the equations of dust nucleation and growth are solved in the co-moving frame of a fixed mass element. It is assumed that seed particles form by clustering of SiO molecules. The calculation of the nucleation rate is based on the experimental data of Nuth and Donn (1982). The quantity of dust formed is calculated by a moment method and the calculation of radiation pressure on the dusty gas is based on a dirty silicate model. Dust nucleation occurs in the model at the upper culmination of the trajectory of a gas parcel where it stays for a considerable time at low temperatures while subsequent dust growth occurs during the descending part of the motion and continues after the next shock reversed motion. It is found tha...

  15. Stellar matter with pseudoscalar condensates

    Energy Technology Data Exchange (ETDEWEB)

    Andrianov, A.A. [Saint-Petersburg State University, St. Petersburg (Russian Federation); Universitat de Barcelona, Departament d' Estructura i Constituents de la Materia and Institut de Ciencies del Cosmos (ICCUB), Barcelona, Catalonia (Spain); Andrianov, V.A.; Kolevatov, S.S. [Saint-Petersburg State University, St. Petersburg (Russian Federation); Espriu, D. [Universitat de Barcelona, Departament d' Estructura i Constituents de la Materia and Institut de Ciencies del Cosmos (ICCUB), Barcelona, Catalonia (Spain)

    2016-03-15

    In this work we consider how the appearance of gradients of pseudoscalar condensates in dense systems may possibly influence the transport properties of photons in such a medium as well as other thermodynamic characteristics. We adopt the hypothesis that in regions where the pseudoscalar density gradient is large the properties of photons and fermions are governed by the usual lagrangian extended with a Chern-Simons interaction for photons and a constant axial field for fermions. We find that these new pieces in the lagrangian produce non-trivial reflection coefficients both for photons and fermions when entering or leaving a region where the pseudoscalar has a non-zero gradient. A varying pseudoscalar density may also lead to instability of some fermion and boson modes and modify some properties of the Fermi sea. We speculate that some of these modifications could influence the cooling rate of stellar matter (for instance in compact stars) and have other observable consequences. While quantitative results may depend on the precise astrophysical details most of the consequences are quite universal and consideration should be given to this possibility. (orig.)

  16. Baryonic Condensates on the Conifold

    CERN Document Server

    Benna, M K; Klebanov, I R; Benna, Marcus K.; Dymarsky, Anatoly; Klebanov, Igor R.

    2007-01-01

    We provide new evidence for the gauge/string duality between the baryonic branch of the cascading SU(k(M+1)) \\times SU(kM) gauge theory and a family of type IIB flux backgrounds based on warped products of the deformed conifold and R^{3,1}. We show that a Euclidean D5-brane wrapping all six deformed conifold directions can be used to measure the baryon expectation values, and present arguments based on kappa-symmetry and the equations of motion that identify the gauge bundles required to ensure worldvolume supersymmetry of this object. Furthermore, we investigate its coupling to the pseudoscalar and scalar modes associated with the phase and magnitude, respectively, of the baryon expectation value. We find that these massless modes perturb the Dirac-Born-Infeld and Chern-Simons terms of the D5-brane action in a way consistent with our identification of the baryonic condensates. We match the scaling dimension of the baryon operators computed from the D5-brane action with that found in the cascading gauge theor...

  17. Slavic Languages: A Condensed Survey.

    Science.gov (United States)

    Jakobson, Roman

    This study examines the geographic distribution of 13 eastern, western, and southern Slavic languages. Commentary on the expansion of Proto-Slavic precedes a brief history of the Slavic literary languages. Separate sections on comparative phonology and comparative grammar are included. A selected bibliography, classified by subject, concludes this…

  18. Slavic Languages: A Condensed Survey.

    Science.gov (United States)

    Jakobson, Roman

    This study examines the geographic distribution of 13 eastern, western, and southern Slavic languages. Commentary on the expansion of Proto-Slavic precedes a brief history of the Slavic literary languages. Separate sections on comparative phonology and comparative grammar are included. A selected bibliography, classified by subject, concludes this…

  19. MULTI-bar K (hyper)nuclei and Kaon Condensation

    Science.gov (United States)

    Gazda, D.; Mareš, J.; Friedman, E.; Gal, A.

    2010-10-01

    We report on recent relativistic mean-field calculations of multi-bar K nuclei1,2 which were performed fully and self-consistently across the periodic table. The bar K separation energy B{bar K} as well as the nuclear and bar K-meson densities were found to saturate with the number of antikaons in the nuclear medium. Saturation appears robust against a wide range of variations, including the nuclear model used and the type of boson fields mediating the strong interactions. In addition, we have explored properties of kaonic hypernuclei - strange systems made of nucleons, hyperons and K- mesons. We observed saturation also in these objects. Since the bar K separation energy B{bar K} does not exceed 200 MeV, multi-bar K nuclei lie energetically well above multi-hyperonic nuclei and it is unlikely that kaon condensation could occur in strong-interaction self-bound hadronic matter.

  20. Dropwise condensation dynamics in humid air

    Science.gov (United States)

    Castillo Chacon, Julian Eduardo

    Dropwise condensation of atmospheric water vapor is important in multiple practical engineering applications. The roles of environmental factors and surface morphology/chemistry on the condensation dynamics need to be better understood to enable efficient water-harvesting, dehumidication, and other psychrometric processes. Systems and surfaces that promote faster condensation rates and self-shedding of condensate droplets could lead to improved mass transfer rates and higher water yields in harvesting applications. The thesis presents the design and construction of an experimental facility that allows visualization of the condensation process as a function of relative humidity. Dropwise condensation experiments are performed on a vertically oriented, hydrophobic surface at a controlled relative humidity and surface subcooling temperature. The distribution and growth of water droplets are monitored across the surface at different relative humidities (45%, 50%, 55%, and 70%) at a constant surface subcooling temperature of 15 °C below the ambient temperature. The droplet growth dynamics exhibits a strong dependency on relative humidity in the early stages during which there is a large population of small droplets on the surface and single droplet growth dominates over coalescence effects. At later stages, the dynamics of droplet growth is insensitive to relative humidity due to the dominance of coalescence effects. The overall volumetric rate of condensation on the surface is also assessed as a function of time and ambient relative humidity. Low relative humidity conditions not only slow the absolute rate of condensation, but also prolong an initial transient regime over which the condensation rate remains significantly below the steady-state value. The current state-of-the-art in dropwise condensation research indicates the need for systematic experimental investigations as a function of relative humidity. The improved understanding of the relative humidity

  1. Quark Virtuality and QCD Vacuum Condensates

    Institute of Scientific and Technical Information of China (English)

    ZHOU Li-Juan; MA Wei-Xing

    2004-01-01

    @@ Based on the Dyson-Schwinger equations (DSEs) in the ‘rainbow' approximation, we investigate the quark virtuality in the vacuum state and quantum-chromodynamics (QCD) vacuum condensates. In particular, we calculate the local quark vacuum condensate and quark-gluon mixed condensates, and then the virtuality of quark. The calculated quark virtualities are λ2u,d = 0.7 GeV2 for u, d quarks, and 2s 1.6 GeV2 for s quark.Our theoretical predictions are consistent with empirical values used in QCD sum rules, and also fit to lattice QCD predictions.

  2. Microscopic theory of equilibrium polariton condensates

    Science.gov (United States)

    Xue, Fei; Wu, Fengcheng; Xie, Ming; Su, Jung-Jung; MacDonald, A. H.

    2016-12-01

    We present a microscopic theory of the equilibrium polariton condensate state of a semiconductor quantum well in a planar optical cavity. The theory accounts for the adjustment of matter excitations to the presence of a coherent photon field, predicts effective polariton-polariton interaction strengths that are weaker and condensate exciton fractions that are smaller than in the commonly employed exciton-photon model, and yields effective Rabi coupling strengths that depend on the detuning of the cavity-photon energy relative to the bare exciton energy. The dressed quasiparticle bands that appear naturally in the theory provide a mechanism for electrical manipulation of polariton condensates.

  3. QCD condensates in ADS/QCD

    DEFF Research Database (Denmark)

    Bechi, Jacopo

    2009-01-01

    This paper focuses on some issues about condensates and renormalization in AdS/QCD models. In particular we consider the consistency of the AdS/QCD approach for scale dependent quantities as the chiral condensate questioned in some recent papers and the 4D meaning of the 5D cosmological constant...... in a model in which the QCD is dual to a 5D gravity theory. We will be able to give some arguments that the cosmological constant is related to the QCD gluon condensate....

  4. Active condensation of water by plants

    Directory of Open Access Journals (Sweden)

    Prokhorov Alexey Anatolievich

    2013-10-01

    Full Text Available This paper is devoted to some peculiarities of water condensation on the surface of plants . Arguments in support of the hypothesis that in decreasing temperature of leaves and shoots below the dew point, the plant can actively condense moisture from the air, increasing the duration of dewfall are presented. Evening dewfall on plant surfaces begins before starting the formation of fog. Morning condensation continues for some time after the air temperature exceeds the dew point . The phenomenon in question is found everywhere, but it is particularly important for plants in arid ecosystems.

  5. The Dynamics of Aerosols in Condensational Scrubbers

    DEFF Research Database (Denmark)

    Johannessen, Jens Tue; Christensen, Jan A.; Simonsen, Ole;

    1997-01-01

    A mathematical model for the simulation of the dynamics of aerosol change in condensational scrubbers and scrubbing condensers is proposed. The model is applicable for packed column gas/liquid contact when plug flow can be assumed. The model is compared with experimental data for particle removal...... in a pilot plant condensational scrubber. The model can satisfactorily predict particle growth and particle deposition by diffusional, convective and inertial mechanisms for a wide range of conditions. The parameters of principal importance for the model precision are identified and a procedure...

  6. Holographic Duality in Condensed Matter Physics

    Science.gov (United States)

    Zaanen, Jan; Liu, Yan; Sun, Ya-Wen; Schalm, Koenraad

    2015-11-01

    Preface; 1. Introduction; 2. Condensed matter: the charted territory; 3. Condensed matter: the challenges; 4. Large N field theories for holography and condensed matter; 5. The AdS/CFT correspondence as computational device: the dictionary; 6. Finite temperature magic: black holes and holographic thermodynamics; 7. Holographic hydrodynamics; 8. Finite density: the Reissner-Nordström black hole and strange metals; 9. Holographic photoemission and the RN metal: the fermions as probes; 10. Holographic superconductivity; 11. Holographic Fermi liquids; 12. Breaking translational invariance; 13. AdS/CMT from the top down; 14. Outlook: holography and quantum matter; References; Index.

  7. Pool boiling and condensation analysis for a vertical tube bundle condenser

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, W.; Wolf, B., E-mail: zhouw@purdue.edu [Purdue Univ., West Lafayette, Indiana (United States); Revankar, S.T., E-mail: shripad@ecn.purdue.edu [Purdue Univ., West Lafayette, Indiana (United States); POSTECH, Pohang (Korea, Republic of)

    2011-07-01

    An experimental and theoretical study is performed for the steam condensation in a vertical tube bundle passive condenser simulating PCCS condenser in the ESBWR. Four condenser tubes are submerged in a water pool where the heat from the condenser tube is removed through boiling heat transfer. Condenser tubes with a full length/diameter scale are used to obtain the condensation data with various process parameters. The comparison of tube bundle experimental data with the single tube data by both the experiments and models shows that the single tube secondary heat transfer coefficient (HTC) is between 25% - 35% less than what was recorded for the tube bundle, and the tube bundle condensation rates are slightly higher than the data from the single tube test sections due to turbulent mixing effect which increases the condensation heat removal. The turbulent mixing on the secondary side decreases the DT between pool water and condenser tube outer wall, causing an increase in secondary HTC. This increase in secondary HTC thus results in higher condensate mass flow rates. Tube bundle boundary layer model and heat and mass analogy model were then developed for the prediction of the filmwise steam condensation with noncondensable (NC) gas in a vertical tube bundle. The predictions from the models are compared with the experimental data for various complete condensation and through flow conditions and the agreement is satisfactory. The local parameters predicted by the boundary layer model and heat and mass analogy model with tube bundle pool boiling can also be predicted with the axial distance from entrance for different NC gas fractions and system pressures. (author)

  8. Method and apparatus for removing non-condensible gas from a working fluid in a binary power system

    Energy Technology Data Exchange (ETDEWEB)

    Mohr, Charles M. (Idaho Falls, ID); Mines, Gregory L. (Idaho Falls, ID); Bloomfield, K. Kit (Idaho Falls, ID)

    2002-01-01

    Apparatus for removing non-condensible gas from a working fluid utilized in a thermodynamic system comprises a membrane having an upstream side operatively connected to the thermodynamic system so that the upstream side of the membrane receives a portion of the working fluid. The first membrane separates the non-condensible gas from the working fluid. A pump operatively associated with the membrane causes the portion of the working fluid to contact the membrane and to be returned to the thermodynamic system.

  9. Gas adsorption and gas mixture separations using mixed-ligand MOF material

    Science.gov (United States)

    Hupp, Joseph T.; Mulfort, Karen L.; Snurr, Randall Q.; Bae, Youn-Sang

    2011-01-04

    A method of separating a mixture of carbon dioxiode and hydrocarbon gas using a mixed-ligand, metal-organic framework (MOF) material having metal ions coordinated to carboxylate ligands and pyridyl ligands.

  10. Hydrocarbons and Air Pollution: An Annotated Bibliography. Part I., Categories A to E and Part II., Categories F to M and Indexes.

    Science.gov (United States)

    National Air Pollution Control Administration (DHEW), Raleigh, NC.

    This two-part bibliography represents an effort to collect, condense, and organize the literature on the hydrocarbons in relation to air pollution. The approximately 2,300 documents abstracted are all included in the information storage and retrieval system of the National Air Pollution Control Administration's (NAPCA) Air Pollution Technical…

  11. MAPPING PROVISION OF LANDSCAPE-ENVIRONMENTAL SUSTAINABILITY FOR AREAS OF PRODUCTION, PROCESSING AND TRANSPORTATION OF HYDROCARBON RAW MATERIALS WITH USING REMOTE SENSING DATA AND GIS TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    G. V. Geldieva

    2015-01-01

    Full Text Available The article describes the wide range of applications at all stages of development of hydrocarbon deposits mapping method. On the model region – Karachaganak gas condensate field to demonstrate the use of modern geoinformation technologies in creating a series of inventory and assessment of landscape-ecological maps, maps of general scientific content, maps application and purpose.

  12. A Preliminary Experimental Study of Filmwise and Dropwise Condensation on SUS316 Surface

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jae Young; Jeong, Yong Hoon [KAIST, Daejeon (Korea, Republic of); Noriyuki, Watanabe [Tokyo Institute of Technology, Tokyo (Japan)

    2015-10-15

    This paper studied about the cooling characteristic of SUS316 surface as a PCCS heat exchanger. Specifically, filmwise and dropwise condensations on SUS316 surface were compared. The passive safety features against station blackout (SBO) and containment safety became important issue after Fukushima accident. As a result, passive containment cooling system (PCCS) is selected as candidate option for the advanced light water reactors to guarantee integrity of containment. To design efficient heat exchanger of PCCS inside of concrete containment, a number of attempts were studied to compensate the low heat transfer coefficient of condensation in non-condensable gas circumstance. The study in this paper focused on the dropwise condensation to enhance the cooling performance of PCCS heat exchanger. Bare SUS316 surface represented stable dropwise condensation phase over 12 hours of experiment for all experiment condition shown in Table I. Figure 3 shows the previous studies conducted by other researcher with our result. Subcooled temperature versus heat transfer coefficient (HTC) of DWC on various cooling surface with coatings were compared. Figure 4 and 5 shows the condensation HTC of DWC and FWC with different non-condensable gas fractions. The result of DWC with pure steam was well proportional to the power of subcooled temperature. Otherwise, the result with non-condensable gas shows HTC in low subcooled temperature under 5 .deg. C seems to be decreased, but the result was shaded by the high uncertainty. The result of FWC also proportional to power of subcooled temperature regardless of air concentration and well separated by air concentration condition.

  13. Multi-shell model of ion-induced nucleic acid condensation

    Science.gov (United States)

    Tolokh, Igor S.; Drozdetski, Aleksander V.; Pollack, Lois; Baker, Nathan A.; Onufriev, Alexey V.

    2016-04-01

    We present a semi-quantitative model of condensation of short nucleic acid (NA) duplexes induced by trivalent cobalt(iii) hexammine (CoHex) ions. The model is based on partitioning of bound counterion distribution around single NA duplex into "external" and "internal" ion binding shells distinguished by the proximity to duplex helical axis. In the aggregated phase the shells overlap, which leads to significantly increased attraction of CoHex ions in these overlaps with the neighboring duplexes. The duplex aggregation free energy is decomposed into attractive and repulsive components in such a way that they can be represented by simple analytical expressions with parameters derived from molecular dynamic simulations and numerical solutions of Poisson equation. The attractive term depends on the fractions of bound ions in the overlapping shells and affinity of CoHex to the "external" shell of nearly neutralized duplex. The repulsive components of the free energy are duplex configurational entropy loss upon the aggregation and the electrostatic repulsion of the duplexes that remains after neutralization by bound CoHex ions. The estimates of the aggregation free energy are consistent with the experimental range of NA duplex condensation propensities, including the unusually poor condensation of RNA structures and subtle sequence effects upon DNA condensation. The model predicts that, in contrast to DNA, RNA duplexes may condense into tighter packed aggregates with a higher degree of duplex neutralization. An appreciable CoHex mediated RNA-RNA attraction requires closer inter-duplex separation to engage CoHex ions (bound mostly in the "internal" shell of RNA) into short-range attractive interactions. The model also predicts that longer NA fragments will condense more readily than shorter ones. The ability of this model to explain experimentally observed trends in NA condensation lends support to proposed NA condensation picture based on the multivalent "ion binding

  14. Recent developments in Bose-Einstein condensation

    Energy Technology Data Exchange (ETDEWEB)

    Kalman, G.

    1997-09-22

    This paper contains viewgraphs on developments on Bose-Einstein condensation. Some topics covered are: strongly coupled coulomb systems; standard response functions of the first and second kind; dynamical mean field theory; quasi localized charge approximation; and the main equations.

  15. Vacuum condensates and `ether-drift' experiments

    OpenAIRE

    Consoli, M.; Pagano, A.; Pappalardo, L.

    2003-01-01

    The idea of a `condensed' vacuum state is generally accepted in modern elementary particle physics. We argue that this should motivate a new generation of precise `ether-drift' experiments with present-day technology.

  16. Condensate of excitations in moving superfluids

    CERN Document Server

    Kolomeitsev, E E

    2016-01-01

    A possibility of the condensation of excitations with a non-zero momentum in rectilinearly moving and rotating superfluid bosonic and fermionic (with Cooper pairing) media is considered in terms of a phenomenological order-parameter functional at zero and non-zero temperature. The results might be applicable to the description of bosonic systems like superfluid $^4$He, ultracold atomic Bose gases, charged pion and kaon condensates in rotating neutron stars, and various superconducting fermionic systems with pairing, like proton and color-superconducting components in compact stars, metallic superconductors, and neutral fermionic systems with pairing, like the neutron component in compact stars and ultracold atomic Fermi gases. Order parameters of the "mother" condensate in the superfluid and the new condensate of excitations, corresponding energy gains, critical temperatures and critical velocities are found.

  17. Cold condensation of dust in the ISM

    CERN Document Server

    Rouillé, Gaël; Krasnokutski, Serge A; Krebsz, Melinda; Henning, Thomas

    2015-01-01

    The condensation of complex silicates with pyroxene and olivine composition at conditions prevailing in molecular clouds has been experimentally studied. For this purpose, molecular species comprising refractory elements were forced to accrete on cold substrates representing the cold surfaces of surviving dust grains in the interstellar medium. The efficient formation of amorphous and homogeneous magnesium iron silicates at temperatures of about 12 K has been monitored by IR spectroscopy. The gaseous precursors of such condensation processes in the interstellar medium are formed by erosion of dust grains in supernova shock waves. In the laboratory, we have evaporated glassy silicate dust analogs and embedded the released species in neon ice matrices that have been studied spectroscopically to identify the molecular precursors of the condensing solid silicates. A sound coincidence between the 10 micron band of the interstellar silicates and the 10 micron band of the low-temperature siliceous condensates can be...

  18. Bimodal condensation silicone elastomers as dielectric elastomers

    DEFF Research Database (Denmark)

    Yu, Liyun; Madsen, Frederikke Bahrt; Skov, Anne Ladegaard

    unimodal refers to that there is one polymer only in the system. As an alternative to unimodal networks there are the bimodal networks where two polymers with significantly different molecular weights are mixed with one crosslinker. [2]Silicone rubber can be divided into condensation type and addition type...... according to the curing reaction. The advantages of condensation silicones compared to addition are the relatively low cost, the curing rate largely being independent of temperature, the excellent adhesion, and the catalyst being nontoxic. [3]In this work, a series of bimodal condensation silicone......, the top and bottom surfaces of the elastomer (7:3) prepared at 23oC and 50% humidity were tested by water contact angle and optical microscope. The results show the bimodal condensation elastomer possesses structural heterogeneity, which may lead to favourable properties for DE applications....

  19. Convection in Condensible-rich Atmospheres

    CERN Document Server

    Ding, Feng

    2016-01-01

    Condensible substances are nearly ubiquitous in planetary atmospheres. For the most familiar case-water vapor in Earth's present climate-the condensible gas is dilute, in the sense that its concentration is everywhere small relative to the noncondensible background gases. A wide variety of important planetary climate problems involve nondilute condensible substances. These include planets near or undergoing a water vapor runaway and planets near the outer edge of the conventional habitable zone, for which CO2 is the condensible. Standard representations of convection in climate models rely on several approximations appropriate only to the dilute limit, while nondilute convection differs in fundamental ways from dilute convection. In this paper, a simple parameterization of convection valid in the nondilute as well as dilute limits is derived and used to discuss the basic character of nondilute convection. The energy conservation properties of the scheme are discussed in detail and are verified in radiative-co...

  20. Dual condensates at finite isospin chemical potential

    CERN Document Server

    Zhang, Zhao

    2015-01-01

    The dual observables as order parameters for center symmetry are tested at finite isospin chemical potential $\\mu_I$ in a Polyakov-loop enhanced chiral model of QCD with physical quark masses. As a counterpart of the dressed Polyakov-loop, the first Fourier moment of pion condensate is introduced for $\\mu_I>{m_\\pi}/{2}$ under the temporal twisted boundary conditions for quarks. We demonstrate that this dual condensate exhibits the similar temperature dependence as the conventional Polyakov-loop. We confirm that its rapid increase with $T$ is driven by the evaporating of pion condensation. On the other hand, the dressed Polyakov-loop shows abnormal thermal behavior, which even decreases with $T$ at low temperatures due to the influence of pion condensate. We thus argue that in QCD the critical temperature extracting from a dual observable may have nothing to do with the quark confinement-deconfinement transition if the quark mass is very small.

  1. Arnold Sommerfeld and Condensed Matter Physics

    Science.gov (United States)

    Joas, Christian; Eckert, Michael

    2017-03-01

    Arnold Sommerfeld (1868-1951), one of the founders of modern theoretical physics and a pioneer of quantum theory, was no condensed matter physicist. He nevertheless played a crucial role for the history of the field. Besides his important contributions to the study of condensed matter systems, among which his seminal electron gas theory of metallic conduction probably stands out, he influenced the field through his very approach to science, through his way of “doing” physics. Sommerfeld's specific style permeated not only his research but also his teaching and his promoting of physics. This has had a lasting influence on the practices of physicists to this day, and not only, but importantly, on those of condensed matter physicists. This article aims to provide a concise account of Sommerfeld's influence on the study of condensed matter systems, with regard to both his research and his practice.

  2. High Pressure Preignition Chemistry of Hydrocarbons and Hydrocarbon Mixtures

    Science.gov (United States)

    2007-11-02

    and hydrocarbon blends in our various combustion systems, with emphasis on the effects of elevated pressure using our pressurized flow reactor ( PFR ...facility. Detailed experimental data were generated from the PFR for use in associated kinetic modeling work. We continued to develop and extend both

  3. Process for separating CO sub 2 from a gaseous mixture

    Energy Technology Data Exchange (ETDEWEB)

    Sapper, R.; Kick, H.

    1990-06-12

    A process is disclosed for the separation of carbon dioxide from gases containing light hydrocarbons and a relatively high proportion of CO{sub 2}. Such gases include natural gases, notably those found in tertiary petroleum extraction processes wherein CO{sub 2} is injected under high pressure into deposits. The process has the objective of improving known separation process and reducing the energy requirements needed for carrying out the process. According to the invention, a 2-stage fractionating procedure is provided. In a first fractionating stage, the entire amount of C1 and C2 hydrocarbons in the gaseous mixture to be treated is separated from the mixture. The overhead portion of the product coming from this stage contains essentially all of the C1 and C2 hydrocarbons as well as a portion of the CO{sub 2}. The bottoms fraction from this stage contains essentially all of the C3+ hydrocarbons and the largest portion of the CO{sub 2}. In a second fractionating stage, the bottoms fraction is pumped to a higher pressure and further distilled into a C3+ hydrocarbon fraction and a CO{sub 2} fraction. At least part of the bottoms heating of the first fractionating stage is effected by liquid withdrawn from the bottoms. This liquid is heated while cooling the head of the second fractionating stage and is then recycled into the bottoms of the first fractionating stage. 1 fig.

  4. Total Petroleum Hydrocarbons (TPH): ToxFAQs

    Science.gov (United States)

    ... a state: This map displays locations where Total Petroleum Hydrocarbons (TPH) is known to be present. On ... I get more information? ToxFAQs TM for Total Petroleum Hydrocarbons (TPH) ( Hidrocarburos Totales de Petróleo (TPH) ) August ...

  5. Stabilization flyuorytopodibnoyi structure in oxide vacuum condensate

    Directory of Open Access Journals (Sweden)

    О.М. Заславський

    2006-01-01

    Full Text Available  The influence of the oxide-stabilizer content, M'-cation radius and film deposition temperature on the stabilization of the fluorite-like solid solutions in the zirconium and hafnium oxides-based vacuum condensates, obtained by Laser-evaporating method, was investigated. The optimum parameters of the coatication of the isotropic thermostable coverings was determined. This results were explained by using of the high-speed condensation in vacuum theory.

  6. Essay: fifty years of condensed matter physics.

    Science.gov (United States)

    Cohen, Marvin L

    2008-12-19

    Since the birth of Physical Review Letters fifty years ago, condensed matter physics has seen considerable growth, and both the journal and the field have flourished during this period. In this essay, I begin with some general comments about condensed matter physics and then give some personal views on the conceptual development of the field and list some highlights. The focus is mostly on theoretical developments.

  7. Gaugino condensation, duality and supersymmetry breaking

    CERN Document Server

    Quevedo, Fernando

    1995-01-01

    The status of gaugino condensation in low-energy string theory is reviewed. Emphasis is given to the determination of the efective action below condensation scale in terms of the 2PI and Wilson actions. We illustrate how the different perturbative duality symmetries survive this simple nonperturbative phenomenon, providing evidence for the believe that these are exact nonperturbative symmetries of string theory. Consistency with T duality lifts the moduli degeneracy. The B_{\\mu\

  8. Experimental simulation of the condensation and metamorphism of seasonal CO2 condensates under martian conditions.

    Science.gov (United States)

    Grisolle, F.; Schmitt, B.; Beck, P.; Philippe, S.; Brissaud, O.

    2014-04-01

    An experimental set-up, CARBON-IR, has been developed in order to perform the condensation and metamorphism of CO2 condensates in various controlled martian conditions at, or out of, equilibrium. The sample texture is monitored and near-infrared reflectance spectra are recorded. We present a first set of experiments aimed to simulate the formation of compact translucent slabs by condensation of CO2 gas, the metamorphism of CO2 snow, as well as their sublimation.

  9. Development of gas chromatography-flame ionization detection system with a single column and liquid nitrogen-free for measuring atmospheric C2-C12 hydrocarbons.

    Science.gov (United States)

    Liu, Chengtang; Mu, Yujing; Zhang, Chenglong; Zhang, Zhibo; Zhang, Yuanyuan; Liu, Junfeng; Sheng, Jiujiang; Quan, Jiannong

    2016-01-04

    A liquid nitrogen-free GC-FID system equipped with a single column has been developed for measuring atmospheric C2-C12 hydrocarbons. The system is consisted of a cooling unit, a sampling unit and a separation unit. The cooling unit is used to meet the temperature needs of the sampling unit and the separation unit. The sampling unit includes a dehydration tube and an enrichment tube. No breakthrough of the hydrocarbons was detected when the temperature of the enrichment tube was kept at -90 °C and sampling volume was 400 mL. The separation unit is a small round oven attached on the cooling column. A single capillary column (OV-1, 30 m × 0.32 mm I.D.) was used to separate the hydrocarbons. An optimal program temperature (-60 ∼ 170 °C) of the oven was achieved to efficiently separate C2-C12 hydrocarbons. There were good linear correlations (R(2)=0.993-0.999) between the signals of the hydrocarbons and the enrichment amount of hydrocarbons, and the relative standard deviation (RSD) was less than 5%, and the method detection limits (MDLs) for the hydrocarbons were in the range of 0.02-0.10 ppbv for sampling volume of 400 mL. Field measurements were also conducted and more than 50 hydrocarbons from C2 to C12 were detected in Beijing city.

  10. Wettability Patterning for Enhanced Dropwise Condensation

    Science.gov (United States)

    Ghosh, Aritra; Ganguly, Ranjan; Megaridis, Constantine

    2014-11-01

    Dropwise condensation (DwC), in order to be sustainable, requires removal of the condensate droplets. This removal is frequently facilitated by gravity. The rate of DwC heat transfer depends strongly on the maximum departing droplet diameter. Based on wettability patterning, we present a facile technique designed to control the maximum droplet size in DwC within vapor/air atmospheres, and demonstrate how this approach can be used to enhance the corresponding heat transfer rate. We examine various hydrophilic-superhydrophilic patterns, which, respectively sustain DwC and filmwise (FwC) condensation on the substrate. The fabrication method does notemploy any hydrophobizing agent. By juxtaposing parallel lines of hydrophilic (CA ~ 78°) and superhydrophilic (CA ~ 0°) regions on the condensing surface, we create alternating domains of DwC and FwC. The average droplet size on the DwC domain is reduced by ~ 60% compared to the theoretical maximum, which corresponds to the line width. We compare heat transfer rate between unpatternend DwC surfaces and patterned DwC surfaces. Even after sacrificing 40% of condensing area, we achieve up to 20% improvement in condensate collection rate using an interdigitated superhydrophilic pattern, inspired by the vein network of plant leaves. The bioinspired interdigitated pattern is found to outperform the straight hydrophilic-superhydrophilic pattern, particularly under higher vapor loadings in an air/vapor ambient atmosphere. NSF STTR Grant 1331817 via NBD Nano.

  11. Numerical simulation of condensation on structured surfaces.

    Science.gov (United States)

    Fu, Xiaowu; Yao, Zhaohui; Hao, Pengfei

    2014-11-25

    Condensation of liquid droplets on solid surfaces happens widely in nature and industrial processes. This phase-change phenomenon has great effect on the performance of some microfluidic devices. On the basis of micro- and nanotechnology, superhydrophobic structured surfaces can be well-fabricated. In this work, the nucleating and growth of droplets on different structured surfaces are investigated numerically. The dynamic behavior of droplets during the condensation is simulated by the multiphase lattice Boltzmann method (LBM), which has the ability to incorporate the microscopic interactions, including fluid-fluid interaction and fluid-surface interaction. The results by the LBM show that, besides the chemical properties of surfaces, the topography of structures on solid surfaces influences the condensation process. For superhydrophobic surfaces, the spacing and height of microridges have significant influence on the nucleation sites. This mechanism provides an effective way for prevention of wetting on surfaces in engineering applications. Moreover, it suggests a way to prevent ice formation on surfaces caused by the condensation of subcooled water. For hydrophilic surfaces, however, microstructures may be submerged by the liquid films adhering to the surfaces. In this case, microstructures will fail to control the condensation process. Our research provides an optimized way for designing surfaces for condensation in engineering systems.

  12. Evaporation-condensation transition of the two-dimensional Potts model in the microcanonical ensemble

    KAUST Repository

    Nogawa, Tomoaki

    2011-12-05

    The evaporation-condensation transition of the Potts model on a square lattice is numerically investigated by the Wang-Landau sampling method. An intrinsically system-size-dependent discrete transition between supersaturation state and phase-separation state is observed in the microcanonical ensemble by changing constrained internal energy. We calculate the microcanonical temperature, as a derivative of microcanonical entropy, and condensation ratio, and perform a finite-size scaling of them to indicate the clear tendency of numerical data to converge to the infinite-size limit predicted by phenomenological theory for the isotherm lattice gas model. © 2011 American Physical Society.

  13. Strong Outcoupling from Spin-2 87Rb Bose-Einstein Condensates

    Institute of Scientific and Technical Information of China (English)

    YANG Fan; XIA Lin; ZHOU Xiao-Ji; MA Xiu-Quan; CHEN Xu-Zong

    2005-01-01

    @@ A pulsed atom laser is experimentally demonstrated by means of outcoupling coherent atoms from 87Rb BoseEinstein condensates in magnetic trap via radio-frequency pulses. To study the strong outcoupling dynamics of the atom laser, the original |F = 2, mF = 2〉 condensate and the coupled |F = 2, mF = 1〉 component, both of which overlap in space usually, are separated spatially by collective oscillations. The number of atoms in three of the five Zeeman states are measured and compared with the theoretical results.

  14. Evaporation-condensation transition of the two-dimensional Potts model in the microcanonical ensemble.

    Science.gov (United States)

    Nogawa, Tomoaki; Ito, Nobuyasu; Watanabe, Hiroshi

    2011-12-01

    The evaporation-condensation transition of the Potts model on a square lattice is numerically investigated by the Wang-Landau sampling method. An intrinsically system-size-dependent discrete transition between supersaturation state and phase-separation state is observed in the microcanonical ensemble by changing constrained internal energy. We calculate the microcanonical temperature, as a derivative of microcanonical entropy, and condensation ratio, and perform a finite-size scaling of them to indicate the clear tendency of numerical data to converge to the infinite-size limit predicted by phenomenological theory for the isotherm lattice gas model.

  15. Condensation of the air-steam mixture in a vertical tube condenser

    Science.gov (United States)

    Havlík, Jan; Dlouhý, Tomáš

    2016-03-01

    This paper deals with the condensation of water vapour in the presence of non-condensable air. Experimental and theoretical solutions of this problem are presented here. A heat exchanger for the condensation of industrial waste steam containing infiltrated air was designed. The condenser consists of a bundle of vertical tubes in which the steam condenses as it flows downwards with cooling water flowing outside the tubes in the opposite direction. Experiments with pure steam and with mixtures of steam with added air were carried out to find the dependence of the condensation heat transfer coefficient (HTC) on the air concentration in the steam mixture. The experimental results were compared with the theoretical formulas describing the cases. The theoretical determination of the HTC is based on the Nusselt model of steam condensation on a vertical wall, where the analogy of heat and mass transfer is used to take into account the behaviour of air in a steam mixture during the condensation process. The resulting dependencies obtained from the experiments and obtained from the theoretical model have similar results. The significant decrease in the condensation HTC, which begins at very low air concentrations in a steam mixture, was confirmed.

  16. Condensation of the air-steam mixture in a vertical tube condenser

    Directory of Open Access Journals (Sweden)

    Havlík Jan

    2016-01-01

    Full Text Available This paper deals with the condensation of water vapour in the presence of non-condensable air. Experimental and theoretical solutions of this problem are presented here. A heat exchanger for the condensation of industrial waste steam containing infiltrated air was designed. The condenser consists of a bundle of vertical tubes in which the steam condenses as it flows downwards with cooling water flowing outside the tubes in the opposite direction. Experiments with pure steam and with mixtures of steam with added air were carried out to find the dependence of the condensation heat transfer coefficient (HTC on the air concentration in the steam mixture. The experimental results were compared with the theoretical formulas describing the cases. The theoretical determination of the HTC is based on the Nusselt model of steam condensation on a vertical wall, where the analogy of heat and mass transfer is used to take into account the behaviour of air in a steam mixture during the condensation process. The resulting dependencies obtained from the experiments and obtained from the theoretical model have similar results. The significant decrease in the condensation HTC, which begins at very low air concentrations in a steam mixture, was confirmed.

  17. 33 CFR 157.166 - Hydrocarbon emissions.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Hydrocarbon emissions. 157.166... Crude Oil Washing (COW) System on Tank Vessels Cow Operations § 157.166 Hydrocarbon emissions. If the... ballasted in that port the hydrocarbon vapors in each tank are contained by a means under § 157.132....

  18. Compositions and methods for hydrocarbon functionalization

    Energy Technology Data Exchange (ETDEWEB)

    Gunnoe, Thomas Brent; Fortman, George; Boaz, Nicholas C.; Groves, John T.

    2017-03-28

    Embodiments of the present disclosure provide for methods of hydrocarbon functionalization, methods and systems for converting a hydrocarbon into a compound including at least one group ((e.g., hydroxyl group) (e.g., methane to methanol)), functionalized hydrocarbons, and the like.

  19. Extracellular terpenoid hydrocarbon extraction and quantitation from the green microalgae Botryococcus braunii var. Showa.

    Science.gov (United States)

    Eroglu, Ela; Melis, Anastasios

    2010-04-01

    Mechanical fractionation and aqueous or aqueous/organic two-phase partition approaches were applied for extraction and separation of extracellular terpenoid hydrocarbons from Botryococcus braunii var. Showa. A direct spectrophotometric method was devised for the quantitation of botryococcene and associated carotenoid hydrocarbons extracted by this method. Separation of extracellular botryococcene hydrocarbons from the Botryococcus was achieved upon vortexing of the micro-colonies with glass beads, either in water followed by buoyant density equilibrium to separate hydrocarbons from biomass, or in the presence of heptane as a solvent, followed by aqueous/organic two-phase separation of the heptane-solubilized hydrocarbons (upper phase) from the biomass (lower aqueous phase). Spectral analysis of the upper heptane phase revealed the presence of two distinct compounds, one absorbing in the UV-C, attributed to botryococcene(s), the other in the blue region of the spectrum, attributed to a carotenoid. Specific extinction coefficients were developed for the absorbance of triterpenes at 190nm (epsilon = 90 +/- 5 mM(-1) cm(-1)) and carotenoids at 450 nm (epsilon=165+/-5mM(-1) cm(-1)) in heptane. This enabled application of a direct spectrophotometric method for the quantitation of water- or heptane-extractable botryococcenes and carotenoids. B. braunii var. Showa constitutively accumulates approximately 30% of the dry biomass as extractable (extracellular) botryococcenes, and approximately 0.2% of the dry biomass in the form of a carotenoid. It was further demonstrated that heat-treatment of the Botryococcus biomass substantially accelerates the rate and yield of the extraction process. Advances in this work serve as foundation for a cyclic Botryococcus growth, non-toxic extraction of extracellular hydrocarbons, and return of the hydrocarbon-depleted biomass to growth conditions for further product generation.

  20. The dependence of isobaric thermal heat capacity of gas condensates in liquid phase on their temperature

    Directory of Open Access Journals (Sweden)

    Bukhovich Y. V.

    2015-09-01

    Full Text Available The study of the thermo-physical properties of liquids gives an opportunity of qualitative and quantitative evaluation of condensed matter theory, phase transitions and critical phenomena. To forecast the thermo-dynamic properties of liquid natural hydrocarbons one must know the basic heat-physical characteristics in a wide range of condition parameters. We have researched specific isobaric thermal heat capacity of gas condensates of Oposhnyanskoye, Solokhovskoye, Bukharskoye, Rybalskoye, Stavropolskoye, Schebelinskoye and Yubileinoye deposits theoretically and experimentally. These substances were in liquid phase on pseudo-critical isobar in the range of temperatures from minus 40 till 100 °C. In the article the findings of the investigation are presented. The mean relative experimental error doesn’t exceed ± 1.5 %, with reliability 0.95. The universal equation expressing specific isobaric thermal heat capacity as the function of temperature and molar mass has been obtained. It describes specific isobaric thermal heat capacity on pseudo-critical isobar for investigated natural hydrocarbons with the mean relative error, which does not exceed ± 1.65 %. The use of the equation for the calculation of specific isobaric thermal heat capacity of the substances of other deposits is recommended

  1. EOS simulation and GRNN modeling of the constant volume depletion behavior of gas condensate reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Elsharkawy, A.M.; Foda, S.G. [Kuwait University, Safat (Kuwait). Petroleum Engineering Dept.

    1998-03-01

    Currently, two approaches are being used to predict the changes in retrograde gas condensate composition and estimate the pressure depletion behavior of gas condensate reservoirs. The first approach uses the equation of states whereas the second uses empirical correlations. Equations of states (EOS) are poor predictive tools for complex hydrocarbon systems. The EOS needs adjustment against phase behavior data of reservoir fluid of known composition. The empirical correlation does not involve numerous numerical computations but their accuracy is limited. This study presents two general regression neural network (GRNN) models. The first model, GRNNM1, is developed to predict dew point pressure and gas compressibility at dew point using initial composition of numerous samples while the second model, GRNNM2, is developed to predict the changes in well stream effluent composition at any stages of pressure depletion. GRNNM2 can also be used to determine the initial reservoir fluid composition using dew point pressure, gas compressibility at dew point, and reservoir temperature. These models are based on analysis of 142 sample of laboratory studies of constant volume depletion (CVD) for gas condensate systems forming a total of 1082 depletion stages. The database represents a wide range of gas condensate systems obtained worldwide. The performance of the GRNN models has been compared to simulation results of the equation of state. The study shows that the proposed general regression neural network models are accurate, valid, and reliable. These models can be used to forecast CVD data needed for many reservoir engineering calculations in case laboratory data is unavailable. The GRNN models save computer time involved in EOS calculations. The study also show that once these models are properly trained they can be used to cut expenses of frequent sampling and laborious experimental CVD tests required for gas condensate reservoirs. 55 refs., 13 figs., 6 tabs.

  2. Mitotic chromosome condensation in vertebrates

    Energy Technology Data Exchange (ETDEWEB)

    Vagnarelli, Paola, E-mail: P.Vagnarelli@ed.ac.uk

    2012-07-15

    Work from several laboratories over the past 10-15 years has revealed that, within the interphase nucleus, chromosomes are organized into spatially distinct territories [T. Cremer, C. Cremer, Chromosome territories, nuclear architecture and gene regulation in mammalian cells, Nat. Rev. Genet. 2 (2001) 292-301 and T. Cremer, M. Cremer, S. Dietzel, S. Muller, I. Solovei, S. Fakan, Chromosome territories-a functional nuclear landscape, Curr. Opin. Cell Biol. 18 (2006) 307-316]. The overall compaction level and intranuclear location varies as a function of gene density for both entire chromosomes [J.A. Croft, J.M. Bridger, S. Boyle, P. Perry, P. Teague,W.A. Bickmore, Differences in the localization and morphology of chromosomes in the human nucleus, J. Cell Biol. 145 (1999) 1119-1131] and specific chromosomal regions [N.L. Mahy, P.E. Perry, S. Gilchrist, R.A. Baldock, W.A. Bickmore, Spatial organization of active and inactive genes and noncoding DNA within chromosome territories, J. Cell Biol. 157 (2002) 579-589] (Fig. 1A, A'). In prophase, when cyclin B activity reaches a high threshold, chromosome condensation occurs followed by Nuclear Envelope Breakdown (NEB) [1]. At this point vertebrate chromosomes appear as compact structures harboring an attachment point for the spindle microtubules physically recognizable as a primary constriction where the two sister chromatids are held together. The transition from an unshaped interphase chromosome to the highly structured mitotic chromosome (compare Figs. 1A and B) has fascinated researchers for several decades now; however a definite picture of how this process is achieved and regulated is not yet in our hands and it will require more investigation to comprehend the complete process. From a biochemical point of view a vertebrate mitotic chromosomes is composed of DNA, histone proteins (60%) and non-histone proteins (40%) [6]. I will discuss below what is known to date on the contribution of these two different classes

  3. Polycyclic aromatic hydrocarbons (PAHs) and n-Alkanes in beaked sea snake Enhydrina schistose (Daudin, 1803) from the Mandovi Estuary, Goa

    Digital Repository Service at National Institute of Oceanography (India)

    Mote, S.; RanjeetKumar; Naik, B.G.; Ingole, B.S.

    on marine organisms. A more extensive characterization and a separation of the complex hydrocarbon mixture into individual components is necessary for distinguishing between hydrocarbons of recent biogenic origin and hydrocarbons from fossil fuels. Among... JM (1993) The Biomarker Guide: Interpreting molecular fossils inpetroleum and ancient sediments, Prentice Hall, Englewood Cliffs, New Jersey 363 Readman JW, Fillmann G, Tolosa I, Bartocci J, Villeneuve JP, Catinni C, Mee LD (2002) Petroleum...

  4. Effective viscosity of confined hydrocarbons

    DEFF Research Database (Denmark)

    Sivebæk, Ion Marius; Samoilov, V.N.; Persson, B.N.J.

    2012-01-01

    We present molecular dynamics friction calculations for confined hydrocarbon films with molecular lengths from 20 to 1400 carbon atoms. We find that the logarithm of the effective viscosity ηeff for nanometer-thin films depends linearly on the logarithm of the shear rate: log ηeff=C-nlog γ̇, where...

  5. Fire-safe hydrocarbon fuels

    Energy Technology Data Exchange (ETDEWEB)

    Fodor, G.E.; Weatherford, W.D. Jr.; Wright, B.R.

    1979-11-06

    A stabilized, fire-safe, aqueous hydrocarbon fuel emulsion prepared by mixing: a diesel fuel; an emulsifier (consisting of oleyl diethanolamide, diethanolamine, and diethanolamine soap of oleic acid) which has been treated with about 0 to 7 1/2 of oleic acid. A modified version of this fuel also contains 0 to 0.5% of an antimisting agent, and water.

  6. Enhanced tubes for steam condensers. Volume 1, Summary of condensation and fouling; Volume 2, Detailed study of steam condensation

    Energy Technology Data Exchange (ETDEWEB)

    Webb, R.L.; Chamra, L.; Jaber, H.

    1992-02-01

    Electric utility steam condensers typically use plain tubes made of titanium, stainless steel, or copper alloys. Approximately two-thirds of the total thermal resistance is on the water side of the plain tube. This program seeks to conceive and develop a tube geometry that has special enhancement geometries on the tube (water) side and the steam (shell) side. This ``enhanced`` tube geometry, will provide increased heat transfer coefficients. The enhanced tubes will allow the steam to condense at a lower temperature. The reduced condensing temperature will reduce the turbine heat rate, and increase the plant peak load capability. Water side fouling and fouling control is a very important consideration affecting the choice of the tube side enhancement. Hence, we have consciously considered fouling potential in our selection of the tube side surface geometry. Using appropriate correlations and theoretical models, we have designed condensation and water side surface geometries that will provide high performance and be cleanable using sponge ball cleaning. Commercial tube manufacturers have made the required tube geometries for test purposes. The heat transfer test program includes measurement of the condensation and water side heat transfer coefficients. Fouling tests are being run to measure the waterside fouling resistance, and to the test the ability of the sponge ball cleaning system to clean the tubes.

  7. Nonmethane hydrocarbon and oxy hydrocarbon measurements during the 2002 New England Air Quality Study

    Science.gov (United States)

    Goldan, Paul D.; Kuster, William C.; Williams, Eric; Murphy, Paul C.; Fehsenfeld, Fred C.; Meagher, James

    2004-11-01

    Nonmethane hydrocarbons (NMHCs) and oxy hydrocarbons (oxy HCs) were measured aboard the National Oceanic and Atmospheric Administration research vessel Ronald H. Brown during the New England Air Quality Study from 13 July to 10 August 2002 by an online dual gas chromatographic instrument with two separate analytical columns equipped, respectively, with flame ionization and mass spectrometer detectors. Measurements, taken each half hour, included C2 to C10 alkanes, C2 to C5 alkenes, alcohols and ketones, C6 to C9 aromatics, and biogenic volatile compounds including six monoterpenes, isoprene and its immediate oxidation products methacrolein and methylvinylketone. All compounds have been categorized by their contribution to the OH loss rate calculated for 298K and 1 atm. Large temporal variability was observed for all compounds. Airflow from the Providence, Rhode Island/Boston, Massachusetts, urban corridor northeast to the New Hampshire coast was usually heavily laden with NMHCs and oxy HCs of anthropogenic origin. Comparison of specific compound ratios with automotive tunnel studies suggested that these were predominantly mobile source emissions. When such flow occurred during daylight hours, these urban plumes were accompanied by increases in ozone in the 80 to 120 ppbv range. About equally as often, much less chemically mature NMHC plumes were encountered near the New Hampshire coast. Ozone was titrated out of these latter plumes, and the unusually high mixing ratios of C4 and C5 alkenes suggested that their source was partly gasoline vapor release rather than mobile source emissions. In the New England coastal region explored, in spite of the large anthropogenic NMHC input during periods of offshore flow, OH loss with hydrocarbons was frequently dominated by compounds of biogenic origin. During periods of cleaner marine air inflow the OH loss rate was dominated by reaction with methane and with oxy HCs, predominantly acetone, formaldehyde, and acetaldehyde.

  8. Dropwise condensation on superhydrophobic surfaces with two-tier roughness

    Science.gov (United States)

    Chen, Chuan-Hua; Cai, Qingjun; Tsai, Chialun; Chen, Chung-Lung; Xiong, Guangyong; Yu, Ying; Ren, Zhifeng

    2007-04-01

    Dropwise condensation can enhance heat transfer by an order of magnitude compared to film condensation. Superhydrophobicity appears ideal to promote continued dropwise condensation which requires rapid removal of condensate drops; however, such promotion has not been reported on engineered surfaces. This letter reports continuous dropwise condensation on a superhydrophobic surface with short carbon nanotubes deposited on micromachined posts, a two-tier texture mimicking lotus leaves. On such micro-/nanostructured surfaces, the condensate drops prefer the Cassie state which is thermodynamically more stable than the Wenzel state. With a hexadecanethiol coating, superhydrophobicity is retained during and after condensation and rapid drop removal is enabled.

  9. Cuticular Hydrocarbons as Potential Close Range Recognition Cues in Orchid Bees.

    Science.gov (United States)

    Pokorny, Tamara; Ramírez, Santiago R; Weber, Marjorie Gail; Eltz, Thomas

    2015-12-01

    Male Neotropical orchid bees collect volatile chemicals from their environment and compose species-specific volatile signals, which are subsequently exposed during courtship display. These perfumes are hypothesized to serve as attractants and may play a role in female mate choice. Here, we investigated the potential of cuticular hydrocarbons as additional recognition cues. The cuticular hydrocarbons of males of 35 species belonging to four of the five extant euglossine bee genera consisted of aliphatic hydrocarbons ranging in chain lengths between 21 and 37 C-atoms in distinct compositions, especially between sympatric species of similar coloring and size, for all but one case. Cleptoparasitic Exaerete spp. had divergent profiles, with major compounds predominantly constituted by longer hydrocarbon chains (>30 C-atoms), which may represent an adaptation to the parasitic life history ("chemical insignificance"). Phylogenetic comparative analyses imply that the chemical profiles exhibited by Exaerete spp. are evolutionarily divergent from the rest of the group. Female hydrocarbon profiles were not identical to male profiles in the investigated species, with either partial or complete separation between sexes in multivariate analyses. Sexually dimorphic hydrocarbon profiles are assumed to be the basis for sex recognition in a number of insects, and thus may supplement the acquired perfume phenotypes in chemical information transfer. Overall, cuticular hydrocarbons meet the requirements to function as intraspecific and intersexual close range recognition signals; behavioral experiments are needed to determine their potential involvement in mate recognition.

  10. Vortices in a Bose-Einstein Condensate

    Science.gov (United States)

    Haljan, Paul C.

    2004-05-01

    Since the advent of Bose-Einstein condensation in the dilute alkalis, there has been considerable interest in observing effects in atomic condensates akin to the hallmark effects associated with superfluidity and superconductivity. In particular, the study of quantized vortices and vortex lattices represents an important connection between the traditional ``super" systems such as liquid Helium and this new atomic system. This thesis explores some of the first vortex experiments in a condensate of magnetically trapped Rubidium-87. Single vortex lines and rings are created using a wavefunction engineering technique, which is an ideal starting point to study the dynamical behavior of vortices within the condensate. An entirely different approach of ``intrinsic nucleation" has been developed to create rapidly rotating condensates with large amounts of vorticity. A novel variation of forced evaporation is used to simultaneously cool and spin up an ultracold gas. In this way, condensates can be formed that are rotating in excess of 95% of the centrifugal limit and contain large, extraordinarily regular lattices of well over 100 vortices. Direct detection of the vortex cores makes it possible to study the microscopic structure of the vortex arrangements both at equilibrium and under dynamical conditions where severe applied stresses distort the lattice far from its equilibrium configuration. In conclusion, the techniques developed in this work have helped to open up a new area of rotating condensate physics and, in the future, may lead to regimes of extreme rotation and quantum Hall physics. This work was performed at the University of Colorado, Boulder, under the supervision of Prof. Eric A. Cornell.

  11. Biodegradation of petroleum hydrocarbons in hypersaline environments

    Directory of Open Access Journals (Sweden)

    Luiz Fernando Martins

    2012-09-01

    Full Text Available Literature on hydrocarbon degradation in extreme hypersaline media presents studies that point to a negative effect of salinity increase on hydrocarbonoclastic activity, while several others report an opposite tendency. Based on information available in the literature, we present a discussion on the reasons that justify these contrary results. Despite the fact that microbial ability to metabolize hydrocarbons is found in extreme hypersaline media, indeed some factors are critical for the occurrence of hydrocarbon degradation in such environments. How these factors affect hydrocarbon degradation and their implications for the assessment of hydrocarbon biodegradation in hypersaline environments are presented in this review.

  12. Syngas Upgrading to Hydrocarbon Fuels Technology Pathway

    Energy Technology Data Exchange (ETDEWEB)

    Talmadge, M.; Biddy, M.; Dutta, A.; Jones, S.; Meyer, A.

    2013-03-01

    This technology pathway case investigates the upgrading of woody biomass derived synthesis gas (syngas) to hydrocarbon biofuels. While this specific discussion focuses on the conversion of syngas via a methanol intermediate to hydrocarbon blendstocks, there are a number of alternative conversion routes for production of hydrocarbons through a wide array of intermediates from syngas. Future work will also consider the variations to this pathway to determine the most economically viable and lowest risk conversion route. Technical barriers and key research needs have been identified that should be pursued for the syngas-to-hydrocarbon pathway to be competitive with petroleum-derived gasoline-, diesel- and jet-range hydrocarbon blendstocks.

  13. Biodegradation of petroleum hydrocarbons in hypersaline environments

    Science.gov (United States)

    Martins, Luiz Fernando; Peixoto, Raquel Silva

    2012-01-01

    Literature on hydrocarbon degradation in extreme hypersaline media presents studies that point to a negative effect of salinity increase on hydrocarbonoclastic activity, while several others report an opposite tendency. Based on information available in the literature, we present a discussion on the reasons that justify these contrary results. Despite the fact that microbial ability to metabolize hydrocarbons is found in extreme hypersaline media, indeed some factors are critical for the occurrence of hydrocarbon degradation in such environments. How these factors affect hydrocarbon degradation and their implications for the assessment of hydrocarbon biodegradation in hypersaline environments are presented in this review. PMID:24031900

  14. Quantum Critical Dynamics of Bose-Einstein Condensates in a Shaken Optical Lattice

    Science.gov (United States)

    Clark, Logan W.; Feng, Lei; Ha, Li-Chung; Chin, Cheng

    2016-05-01

    From condensed matter to cosmology, systems which cross a continuous, symmetry-breaking phase transition are expected to generate topological defects whose density scales universally with the rate at which the phase transition is crossed. We experimentally test the application of this universal Kibble-Zurek scaling prediction to quantum phase transitions by studying ultracold bosons in a shaken optical lattice. When the lattice shaking amplitude crosses a critical threshold, an ordinary Bose condensate transitions to an effectively ferromagnetic pseudo-spinor condensate with discrete, magnetized regions separated by domain walls. We appraise the dynamic scaling laws for both the time at which the domain structure forms and the typical size of the domains by varying the quench rate across the transition. We explore the regime in which the universal prediction applies, as well as potential deviations at extreme quench rates.

  15. GENOTOXICITY OF TEN CIGARETTE SMOKE CONDENSATES IN FOUR TEST SYSTEMS: COMPARISONS BETWEEN ASSAYS AND CONDENSATES

    Science.gov (United States)

    What is the study? This the first assessment of a set of cigarette smoke condensates from a range of cigarette types in a variety (4) of short-term genotoxicity assays. Why was it done? No such comparative study of cigarette smoke condensates has been reported. H...

  16. A rapid column technique for trapping and collecting of volatile fungal hydrocarbons and hydrocarbon derivatives.

    Science.gov (United States)

    Booth, Eric; Strobel, Gary; Knighton, Berk; Sears, Joe; Geary, Brad; Avci, Recep

    2011-10-01

    A custom-made stainless steel column was designed to contain various materials that would trap the hydrocarbons and hydrocarbon derivatives during the processes of fungal fermentation ultimately yielding preparative amounts of volatile organic substances (VOCs). Trapping materials tested in the column were Carbotrap materials A and B (Supelco) as well as bentonite-shale from the oil bearing areas of Eastern Montana, the former allowed for the effective and efficient trapping of VOCs from purged cultures of Hypoxylon sp. Trapping efficiencies of various materials were measured by both gravimetric as well as proton transfer reaction mass spectroscopy with the Carbotraps A and B being 99% efficient when tested with known amounts of 1,8-cineole. Trapped fungal VOCs could effectively be removed and recovered via controlled heating of the stainless steel column followed by passage of the gases through a liquid nitrogen trap at a recovery rate of ca 65-70%. This method provides for the recovery of mg quantities of compounds normally present in the gas phase that may be needed for spectroscopy, bioassays and further separation and analysis and may have wide applicability for many other biological systems involving VOCs. Other available Carbotraps could be used for other applications.

  17. Aqueous reactions of chlorine dioxide with hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Rav-Acha, C.; Choshen, E.

    1987-11-01

    In contrast to mechanisms proposed earlier in the literature, according to which chlorine dioxide (ClO/sub 2/) reacts with various hydrocarbons in aqueous media by abstracting allylic or benzylic hydrogens, it is shown that ClO/sub 2/ reacts with olefins through initial electron transfer. Hydrocarbons that can undergo facile oxidation, such as polycyclic aromatic hydrocarbons (PAH) and some olefins, react with ClO/sub 2/ quite rapidly, while saturated aliphatic hydrocarbons, some aromatic hydrocarbons, and olefins substituted with electron-withdrawing groups remain unreactive. This was substantiated by comparing the reactivities toward ClO/sub 2/ of a variety of hydrocarbons, including aliphatic and aromatic hydrocarbons, saturated and unsaturated acids, PAH, or cyclic and acyclic olefins. The results were supported by a detailed kinetic and product study of the reaction between ClO/sub 2/ and some model compounds.

  18. Effect of Non-Condensable Gas Mass Fraction on Condensation Heat Transfer for Water-Ethanol Vapor Mixture

    Science.gov (United States)

    Wang, Shixue; Utaka, Yoshio

    The condensation heat transfer characteristic curves for a ternary vapor mixture of water, ethanol and air (or nitrogen) under several ethanol concentrations and relatively low concentrations of air (or nitrogen) were measured. The effect of non-condensable gas on several different domains in the condensation curves was discussed. The effect of non-condensable gas in the domains controlled by the diffusion resistance and the filmwise condensation was not notable; whereas that in the domain dominated by the condensate resistance of dropwise mode was remarkable. Moreover, variations due to changes in non-condensable gas concentration of several characteristic points representing the curves were discussed.

  19. Simulation Prediction of Transient Dropwise Condensation

    Science.gov (United States)

    Macner, Ashley; Daniel, Susan; Steen, Paul

    2014-11-01

    In order to design effective surfaces for large-scale dropwise condensation, an understanding of how surface functionalization affects drop growth and coalescence is needed. The long term technological goal is a set of design conditions to help NASA achieve maximum heat transfer rates of waste heat generated from electronics and habitable environments under microgravity conditions. Prediction of condenser surface heat transfer performance requires accurate simulation and modeling of the evolution of populations of drops in time. At shorter times, drops are primarily isolated and grow mainly by condensation onto the liquid-gas interface. At longer times, drops grow mainly by coalescence with neighbors. Simulation of dropwise condensation on a neutrally wetting surface and comparison with our previous experimental results is reported. A steady-state single drop conduction model is empirically fitted to determine a temperature profile that captures the drop size evolution. The simulation accurately predicts the continuous time evolution of number-density of drops, drop-size distributions, total condensate volume, fractional coverage, and median drop-size for both transient and steady states, all with no free parameters. This work was supported by a NASA Office of the Chief Technologist's Space Technology Research Fellowship.

  20. Energy condensed packaged systems. Composition, production, properties

    Directory of Open Access Journals (Sweden)

    Igor L. Kovalenko

    2015-03-01

    Full Text Available In this paper it is presented the substantiation of choice of fuel phase composition and optimal technology of emulsion production on the basis of binary solution of ammonium and calcium nitrates, which provide the obtaining of energy condensed packaged systems with specified properties. The thermal decomposition of energy condensed systems on the basis of ammonium nitrate is investigated. It is shown that the fuel phase of emulsion systems should be based on esters of polyunsaturated acids or on combinations thereof with petroleum products. And ceresin or petroleum wax can be used as the structuring additive. The influence of the technology of energy condensed systems production on the physicochemical and detonation parameters of emulsion explosives is considered. It is shown the possibility of obtaining of emulsion systems with dispersion of 1.3...1.8 microns and viscosity higher than 103 Pa∙s in the apparatus of original design. The sensitizing effect of chlorinated paraffin CP-470 on the thermolysis of energy condensed emulsion system is shown. The composition and production technology of energy condensed packaged emulsion systems of mark Ukrainit-P for underground mining in mines not dangerous on gas and dust are developed.

  1. The NSF Condensed Matter Physics Program

    Science.gov (United States)

    Sokol, Paul

    The Condensed Matter Physics (CMP) program in the NSF Division of Materials Research (DMR) supports experimental, as well as combined experiment and theory projects investigating the fundamental physics behind phenomena exhibited by condensed matter systems. CMP is the largest Individual Investigator Award program in DMR and supports a broad portfolio of research spanning both hard and soft condensed matter. Representative research areas include: 1) phenomena at the nano- to macro-scale including: transport, magnetic, and optical phenomena; classical and quantum phase transitions; localization; electronic, magnetic, and lattice structure or excitations; superconductivity; topological insulators; and nonlinear dynamics. 2) low-temperature physics: quantum fluids and solids; 1D & 2D electron systems. 3) soft condensed matter: partially ordered fluids, granular and colloid physics, liquid crystals, and 4) understanding the fundamental physics of new states of matter as well as the physical behavior of condensed matter under extreme conditions e.g., low temperatures, high pressures, and high magnetic fields. In this talk I will review the current CMP portfolio and discuss future funding trends for the program. I will also describe recent activities in the program aimed at addressing the challenges facing current and future principal investigators.

  2. CFD modelling and validation of wall condensation in the presence of non-condensable gases

    Energy Technology Data Exchange (ETDEWEB)

    Zschaeck, G., E-mail: guillermo.zschaeck@ansys.com [ANSYS Germany GmbH, Staudenfeldweg 12, Otterfing 83624 (Germany); Frank, T. [ANSYS Germany GmbH, Staudenfeldweg 12, Otterfing 83624 (Germany); Burns, A.D. [ANSYS UK Ltd, 97 Milton Park, Abingdon, Oxfordshire OX14 4RY (United Kingdom)

    2014-11-15

    Highlights: • A wall condensation model was implemented and validated in ANSYS CFX. • Condensation rate is assumed to be controlled by the concentration boundary layer. • Validation was done using two laboratory scale experiments. • CFD calculations show good agreement with experimental data. - Abstract: The aim of this paper is to present and validate a mathematical model implemented in ANSYS CFD for the simulation of wall condensation in the presence of non-condensable substances. The model employs a mass sink at isothermal walls or conjugate heat transfer (CHT) domain interfaces where condensation takes place. The model was validated using the data reported by Ambrosini et al. (2008) and Kuhn et al. (1997)

  3. Measurement of liquid-liquid equilibria for condensate + glycol and condensate + glycol + water systems

    DEFF Research Database (Denmark)

    Riaz, Muhammad; Kontogeorgis, Georgios; Stenby, Erling Halfdan

    2011-01-01

    Today's oil and gas production requires the application of various chemicals in large amounts. To evaluate the effects of those chemicals on the environment, it is of crucial importance to know how much of the chemicals are discharged via produced water and how much is dissolved in the crude oil....... The ultimate objective of this work is to develop a predictive thermodynamic model for the mutual solubility of oil, water, and polar chemicals. But for the development and validation of the model, experimental data are required. This work presents new experimental liquid-liquid equilibrium (LLE) data for 1......,2-ethanediol (MEG) + condensate and MEG + water + condensate systems at temperatures from (275 to 323) K at atmospheric pressure. The condensate used in this work is a stabilized natural gas condensate from an offshore field in the North Sea. Compositional analysis of the natural gas condensate was carried out...

  4. Application of Evaporative Cooling for the Condensation of Water Vapors from a Flue Gas Waste Heat Boilers CCP

    Directory of Open Access Journals (Sweden)

    Galashov Nikolay

    2016-01-01

    Full Text Available The object of the study are boilers that burn organic fuel and the recovery boilers (RB of the combined cycle plant (CCP, which are al-so working on the products of the combustion of hydrocarbon fuels. The purpose of research is to find technologies that increase efficiency of the thermal power plant (TPP and technologies that reduce the environmental impact on the environment by burning fossil fuels. The paper deals with the technology of the boilers burning hydrocarbon fuel with condensation of water vapor from the exhaust flue gases. Considered the problems caused by using of this technology. Research shows that the main problem of this technology in the boilers is the lack of reliable methods of calculation of heat exchangers, condensers. Particular attention is paid to the application of this technology in the recovery boilers combined-cycle plants, which are currently gaining increasing use in the generation of electricity from the combustion of gas in power plants. It is shown that the application of technology of condensation of water vapor in RB CCP, the temperature decreases of exhaust gases from 100 to 40 °С, allows increasing the effi-ciency of the RB with 86.2 % to 99.5 %, i.e. at 12.3 %, and increase the ef-ficiency of the CCP at 2.8 %.

  5. Level measurement and control strategies for subsea separators

    Science.gov (United States)

    Hjertaker, Bjorn T.; Johansen, Geir A.; Jackson, Peter

    2001-07-01

    Level monitoring instrumentation is an essential part of hydrocarbon processing facilities, and has, together with separator technology, been widely addressed over the last decade. Key issues are production capacity, product enhancement, and well-flow control. The reliability and accuracy of the level instrumentation, and its ability to monitor all the interface layers of the separator, including the thickness of the foam and the oil-water emulsion, are particularly important when considering the level instrumentation as the main sensing element in the automatic control of the separator vessel. Lately, industry focus has been placed on optimal automatic control to improve the quality of the production output, and to minimize the use of expensive and environmentally undesirable separation enhancing chemicals. Recent developments in hydrocarbon production include subsea separation stations, where the constraints placed on the reliability and accuracy of the level instrumentation are especially demanding. This paper presents level interface monitoring developments based on electrical, ultrasonic, thermal, and nucleonic physical principles for three-phase hydrocarbon separators, and introduces the notion of tomometry, meaning multi-point cross-sectional metering aiming to acquire information on the cross-sectional flow-component distribution in the process vessel intended for control purposes.

  6. Both Chromosome Decondensation and Condensation Are Dependent on DNA Replication in C. elegans Embryos

    Directory of Open Access Journals (Sweden)

    Remi Sonneville

    2015-07-01

    Full Text Available During cell division, chromatin alternates between a condensed state to facilitate chromosome segregation and a decondensed form when DNA replicates. In most tissues, S phase and mitosis are separated by defined G1 and G2 gap phases, but early embryogenesis involves rapid oscillations between replication and mitosis. Using Caenorhabditis elegans embryos as a model system, we show that chromosome condensation and condensin II concentration on chromosomal axes require replicated DNA. In addition, we found that, during late telophase, replication initiates on condensed chromosomes and promotes the rapid decondensation of the chromatin. Upon replication initiation, the CDC-45-MCM-GINS (CMG DNA helicase drives the release of condensin I complexes from chromatin and the activation or displacement of inactive MCM-2–7 complexes, which together with the nucleoporin MEL-28/ELYS tethers condensed chromatin to the nuclear envelope, thereby promoting chromatin decondensation. Our results show how, in an early embryo, the chromosome-condensation cycle is functionally linked with DNA replication.

  7. Tachyon Condensation And Large N Transition In Topological Strings

    CERN Document Server

    Yasnov, V

    2005-01-01

    The thesis consists of the two separate parts. The first part is devoted to the study of tachyon condensation in unstable D-branes using the framework of boundary independent string field theory. The subject of the second part is Chern-Simons matrix models and large N transitions in topological strings. We calculate the background independent action for bosonic and supersymmetric open string field theory in a constant B-field. We also determine the tachyon effective action in the presence of constant B-field. In addition using boundary string field theory we study the decay of unstable D-branes to lower dimensional D-branes via the tachyon condensation at one loop level. We analyze one loop divergences and use the Fischler-Susskind mechanism to cancel divergences arising at the boundary of moduli space. The tachyon action up to the second derivative is obtained and a logarithmic correction to the tachyon potential is written down explicitly. Multiple D-branes is also considered and the role of the boundary fe...

  8. Integrated Mach-Zehnder interferometer for Bose-Einstein condensates.

    Science.gov (United States)

    Berrada, T; van Frank, S; Bücker, R; Schumm, T; Schaff, J-F; Schmiedmayer, J

    2013-01-01

    Particle-wave duality enables the construction of interferometers for matter waves, which complement optical interferometers in precision measurement devices. This requires the development of atom-optics analogues to beam splitters, phase shifters and recombiners. Integrating these elements into a single device has been a long-standing goal. Here we demonstrate a full Mach-Zehnder sequence with trapped Bose-Einstein condensates confined on an atom chip. Particle interactions in our Bose-Einstein condensate matter waves lead to a nonlinearity, absent in photon optics. We exploit it to generate a non-classical state having reduced number fluctuations inside the interferometer. Making use of spatially separated wave packets, a controlled phase shift is applied and read out by a non-adiabatic matter-wave recombiner. We demonstrate coherence times a factor of three beyond what is expected for coherent states, highlighting the potential of entanglement as a resource for metrology. Our results pave the way for integrated quantum-enhanced matter-wave sensors.

  9. Nucleation Pathways of CO2 Condensation under Mesoporous Templated Glass

    Science.gov (United States)

    Wang, Bo; Byran, Matthew S.; Warren, Garfield T.; Sokol, Paul E.; Indiana University Team; NIST Collaboration

    2015-03-01

    Carbon capture and storage (CCS) are important elements in reducing greenhouse gas emission and combating global warming. The adsorption behavior of CO2 under mesoporous confinement at room temperature is particularly relevant. , Small Angle Scattering of X-ray (SAXS) and Neutron (SANS) were used to probe the adsorption process of CO2 under such mesoporous confinement MCM-41 and details of nucleation pathways were mapped out by fitting the scattering intensities with adsorption models. From both experiments, the nucleation of CO2 on the inner pore surface of MCM-41 is found to be a two-step process; high density liquid phase CO2 first forms uniform layers following the long range translational symmetry of the porous matrix, above one CO2 filling, determined by the pore size and temperature, capillary condensation initiates. The nucleation sites formed during capillary condensation start to separate the long range symmetry from the one at uniform layers. Finally, SAXS and SANS techniques are compared and they both showed their unique properties of probing the filling-dependent structures of adsorbed CO2 under such mesoporous system.

  10. Cold-atom gravimetry with a Bose-Einstein condensate

    Energy Technology Data Exchange (ETDEWEB)

    Debs, J. E.; Altin, P. A.; Barter, T. H.; Doering, D.; Dennis, G. R.; McDonald, G.; Close, J. D.; Robins, N. P. [Australian Centre for Quantum Atom Optics and Department of Quantum Science, Australian National University, Canberra 0200 (Australia); Anderson, R. P. [School of Physics, Monash University, Melbourne 3800 (Australia)

    2011-09-15

    We present a cold-atom gravimeter operating with a sample of Bose-condensed {sup 87}Rb atoms. Using a Mach-Zehnder configuration with the two arms separated by a two-photon Bragg transition, we observe interference fringes with a visibility of (83{+-}6)% at T=3 ms. We exploit large momentum transfer (LMT) beam splitting to increase the enclosed space-time area of the interferometer using higher-order Bragg transitions and Bloch oscillations. We also compare fringes from condensed and thermal sources and observe a reduced visibility of (58{+-}4)% for the thermal source. We suspect the loss in visibility is caused partly by wave-front aberrations, to which the thermal source is more susceptible due to its larger transverse momentum spread. Finally, we discuss briefly the potential advantages of using a coherent atomic source for LMT, and we present a simple mean-field model to demonstrate that with currently available experimental parameters, interaction-induced dephasing will not limit the sensitivity of inertial measurements using freely falling, coherent atomic sources.

  11. Bose-Einstein condensation in a frustrated triangular optical lattice

    Science.gov (United States)

    Janzen, Peter; Huang, Wen-Min; Mathey, L.

    2016-12-01

    The recent experimental condensation of ultracold atoms in a triangular optical lattice with a negative effective tunneling parameter paves the way for the study of frustrated systems in a controlled environment. Here, we explore the critical behavior of the chiral phase transition in such a frustrated lattice in three dimensions. We represent the low-energy action of the lattice system as a two-component Bose gas corresponding to the two minima of the dispersion. The contact repulsion between the bosons separates into intra- and intercomponent interactions, referred to as V0 and V12, respectively. We first employ a Huang-Yang-Luttinger approximation of the free energy. For V12/V0=2 , which corresponds to the bare interaction, this approach suggests a first-order phase transition, at which both the U (1 ) symmetry of condensation and the Z2 symmetry of the emergent chiral order are broken simultaneously. Furthermore, we perform a renormalization-group calculation at one-loop order. We demonstrate that the coupling regime 0 1 we show that V0 flows to a negative value, while V12 increases and remains positive. This results in a breakdown of the effective quartic-field theory due to a cubic anisotropy and, again, suggests a discontinuous phase transition.

  12. Preoperational test report, recirculation condenser cooling systems

    Energy Technology Data Exchange (ETDEWEB)

    Clifton, F.T.

    1997-11-04

    This represents a preoperational test report for Recirculation Condenser Systems, Project W-030. Project W-030 provides a ventilation upgrade for the four Aging Waste Facility tanks. The four system provide condenser cooling water for vapor space cooling of tanks AY1O1, AY102, AZ1O1, AZ102. Each system consists of a valved piping loop, a pair of redundant recirculation pumps, a closed-loop evaporative cooling tower, and supporting instrumentation; equipment is located outside the farm on concrete slabs. Piping is routed to the each ventilation condenser inside the farm via below-grade concrete trenches. The tests verify correct system operation and correct indications displayed by the central Monitor and Control System.

  13. Vector meson condensation in a pion superfluid

    Science.gov (United States)

    Brauner, Tomáš; Huang, Xu-Guang

    2016-11-01

    We revisit the suggestion that charged ρ -mesons undergo Bose-Einstein condensation in isospin-rich nuclear matter. Using a simple version of the Nambu-Jona-Lasinio (NJL) model, we conclude that ρ -meson condensation is either avoided or postponed to isospin chemical potentials much higher than the ρ -meson mass as a consequence of the repulsive interaction with the preformed pion condensate. In order to support our numerical results, we work out a linear sigma model for pions and ρ -mesons, showing that the two models lead to similar patterns of medium dependence of meson masses. As a byproduct, we analyze in detail the mapping between the NJL model and the linear sigma model, focusing on conditions that must be satisfied for a quantitative agreement between the models.

  14. DROPWISE CONDENSATION ON MICRO- AND NANOSTRUCTURED SURFACES

    Energy Technology Data Exchange (ETDEWEB)

    Enright, R; Miljkovic, N; Alvarado, JL; Kim, K; Rose, JW

    2014-07-23

    In this review we cover recent developments in the area of surface-enhanced dropwise condensation against the background of earlier work. The development of fabrication techniques to create surface structures at the micro-and nanoscale using both bottom-up and top-down approaches has led to increased study of complex interfacial phenomena. In the heat transfer community, researchers have been extensively exploring the use of advanced surface structuring techniques to enhance phase-change heat transfer processes. In particular, the field of vapor-to-liquid condensation and especially that of water condensation has experienced a renaissance due to the promise of further optimizing this process at the micro-and nanoscale by exploiting advances in surface engineering developed over the last several decades.

  15. Condensation heat transfer coefficient versus wettability

    Science.gov (United States)

    Roudgar, M.; De Coninck, J.

    2015-05-01

    In this paper we show how condensation on substrates can induce wetting behavior that is quite different from that of deposited or impinging drops. We describe surfaces with the same wettability in ambient conditions presenting different wetting behavior and growth of droplets in condensation. The experimental results show a rapid spread of droplets and formation of the film on the copper surface, while droplets on SU-8 surface remains on the regular shape while they grow within the time, without coalescence, as observed for Cu. Although the heat conductivity of SU-8 is much lower, due to a difference in wetting behavior, the heat transfer coefficient (h) is higher for dropwise condensation on Cu with a thin layer of SU-8 than filmwise on the bare copper.

  16. Nonlocal Condensate Model for QCD Sum Rules

    CERN Document Server

    Hsieh, Ron-Chou

    2009-01-01

    We include effects of nonlocal quark condensates into QCD sum rules (QSR) via the K$\\ddot{\\mathrm{a}}$ll$\\acute{\\mathrm{e}}$n-Lehmann representation for a dressed fermion propagator, in which a negative spectral density function manifests their nonperturbative nature. Applying our formalism to the pion form factor as an example, QSR results are in good agreement with data for momentum transfer squared up to $Q^2 \\approx 10 $ GeV$^2$. It is observed that the nonlocal quark-condensate contribution descends like $1/Q^4$, different from the exponential decrease in $Q^2$ obtained in the literature, and contrary to the linear rise in the local-condensate approximation.

  17. Efficient cell migration requires global chromatin condensation.

    Science.gov (United States)

    Gerlitz, Gabi; Bustin, Michael

    2010-07-01

    Cell migration is a fundamental process that is necessary for the development and survival of multicellular organisms. Here, we show that cell migration is contingent on global condensation of the chromatin fiber. Induction of directed cell migration by the scratch-wound assay leads to decreased DNaseI sensitivity, alterations in the chromatin binding of architectural proteins and elevated levels of H4K20me1, H3K27me3 and methylated DNA. All these global changes are indicative of increased chromatin condensation in response to induction of directed cell migration. Conversely, chromatin decondensation inhibited the rate of cell migration, in a transcription-independent manner. We suggest that global chromatin condensation facilitates nuclear movement and reshaping, which are important for cell migration. Our results support a role for the chromatin fiber that is distinct from its known functions in genetic processes.

  18. Dropwise condensation on inclined textured surfaces

    CERN Document Server

    Khandekar, Sameer

    2014-01-01

    Dropwise Condensation on Textured Surfaces presents a holistic framework for understanding dropwise condensation through mathematical modeling and meaningful experiments. The book presents a review of the subject required to build up models as well as to design experiments. Emphasis is placed on the effect of physical and chemical texturing and their effect on the bulk transport phenomena. Application of the model to metal vapor condensation is of special interest. The unique behavior of liquid metals, with their low Prandtl number and high surface tension, is also discussed. The model predicts instantaneous drop size distribution for a given level of substrate subcooling and derives local as well as spatio-temporally averaged heat transfer rates and wall shear stress.

  19. Field theories of condensed matter physics

    CERN Document Server

    Fradkin, Eduardo

    2013-01-01

    Presenting the physics of the most challenging problems in condensed matter using the conceptual framework of quantum field theory, this book is of great interest to physicists in condensed matter and high energy and string theorists, as well as mathematicians. Revised and updated, this second edition features new chapters on the renormalization group, the Luttinger liquid, gauge theory, topological fluids, topological insulators and quantum entanglement. The book begins with the basic concepts and tools, developing them gradually to bring readers to the issues currently faced at the frontiers of research, such as topological phases of matter, quantum and classical critical phenomena, quantum Hall effects and superconductors. Other topics covered include one-dimensional strongly correlated systems, quantum ordered and disordered phases, topological structures in condensed matter and in field theory and fractional statistics.

  20. Preoperational test report, recirculation condenser cooling systems

    Energy Technology Data Exchange (ETDEWEB)

    Clifton, F.T.

    1997-11-04

    This represents a preoperational test report for Recirculation Condenser Systems, Project W-030. Project W-030 provides a ventilation upgrade for the four Aging Waste Facility tanks. The four system provide condenser cooling water for vapor space cooling of tanks AY1O1, AY102, AZ1O1, AZ102. Each system consists of a valved piping loop, a pair of redundant recirculation pumps, a closed-loop evaporative cooling tower, and supporting instrumentation; equipment is located outside the farm on concrete slabs. Piping is routed to the each ventilation condenser inside the farm via below-grade concrete trenches. The tests verify correct system operation and correct indications displayed by the central Monitor and Control System.

  1. The condensation of water on adsorbed viruses.

    Science.gov (United States)

    Alonso, José María; Tatti, Francesco; Chuvilin, Andrey; Mam, Keriya; Ondarçuhu, Thierry; Bittner, Alexander M

    2013-11-26

    The wetting and dewetting behavior of biological nanostructures and to a greater degree single molecules is not well-known even though their contact with water is the basis for all biology. Here, we show that environmental electron microscopy (EM) can be applied as a means of imaging the condensation of water onto viruses. We captured the formation of submicrometer water droplets and filaments on single viral particles by environmental EM and by environmental transmission EM. The condensate structures are compatible with capillary condensation between adsorbed virus particles and with known droplet shapes on patterned surfaces. Our results confirm that such droplets exist down to evaporation cycle as expected from their stability in air and water. Moreover we developed procedures that overcome problems of beam damage and of resolving structures with a low atomic number.

  2. Vector meson condensation in a pion superfluid

    CERN Document Server

    Brauner, Tomas

    2016-01-01

    We revisit the suggestion that charged rho-mesons undergo Bose-Einstein condensation in isospin-rich nuclear matter. Using a simple version of the Nambu-Jona-Lasinio (NJL) model, we conclude that rho-meson condensation is either avoided or postponed to isospin chemical potentials much higher than the rho-meson mass as a consequence of the repulsive interaction with the preformed pion condensate. In order to support our numerical results, we work out a linear sigma model for pions and rho-mesons, showing that the two models lead to similar patterns of medium dependence of meson masses. As a byproduct, we analyze in detail the mapping between the NJL model and the linear sigma model, focusing on conditions that must be satisfied for a quantitative agreement between the models.

  3. Microbial production of gaseous hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Fukuda, Hideo

    1987-10-20

    Microbial production of ethylene, isobutane and a saturated gaseous hydrocarbon mixture was described. Microbial ethylene production was studied with Penicillium digitatum IFO 9372 and a novel pathway of the ethylene biosynthesis through alpha-ketoglutarate was proposed. Rhodotorula minuta IFO 1102 was selected for the microbial production of isobutane and the interesting actions of L-leucine and L-phenylalanine for the isobutane production were found. It was finally presented about the microbial production of a saturated gaseous hydrocarbon mixture with Rhizopus japonicus IFO 4758 was described. A gas mixture was produced through a chemical reaction of SH compounds and some cellular component such as squalene under aerobic conditions. (4 figs, 7 tabs, 41 refs)

  4. Hydrocarbon Rocket Technology Impact Forecasting

    Science.gov (United States)

    Stuber, Eric; Prasadh, Nishant; Edwards, Stephen; Mavris, Dimitri N.

    2012-01-01

    Ever since the Apollo program ended, the development of launch propulsion systems in the US has fallen drastically, with only two new booster engine developments, the SSME and the RS-68, occurring in the past few decades.1 In recent years, however, there has been an increased interest in pursuing more effective launch propulsion technologies in the U.S., exemplified by the NASA Office of the Chief Technologist s inclusion of Launch Propulsion Systems as the first technological area in the Space Technology Roadmaps2. One area of particular interest to both government agencies and commercial entities has been the development of hydrocarbon engines; NASA and the Air Force Research Lab3 have expressed interest in the use of hydrocarbon fuels for their respective SLS Booster and Reusable Booster System concepts, and two major commercially-developed launch vehicles SpaceX s Falcon 9 and Orbital Sciences Antares feature engines that use RP-1 kerosene fuel. Compared to engines powered by liquid hydrogen, hydrocarbon-fueled engines have a greater propellant density (usually resulting in a lighter overall engine), produce greater propulsive force, possess easier fuel handling and loading, and for reusable vehicle concepts can provide a shorter turnaround time between launches. These benefits suggest that a hydrocarbon-fueled launch vehicle would allow for a cheap and frequent means of access to space.1 However, the time and money required for the development of a new engine still presents a major challenge. Long and costly design, development, testing and evaluation (DDT&E) programs underscore the importance of identifying critical technologies and prioritizing investment efforts. Trade studies must be performed on engine concepts examining the affordability, operability, and reliability of each concept, and quantifying the impacts of proposed technologies. These studies can be performed through use of the Technology Impact Forecasting (TIF) method. The Technology Impact

  5. Comprehensive two-dimensional gas chromatography for characterizing mineral oils in foods and distinguishing them from synthetic hydrocarbons.

    Science.gov (United States)

    Biedermann, Maurus; Grob, Koni

    2015-01-02

    Many foods are contaminated by hydrocarbons of mineral oil or synthetic origin. High performance liquid chromatography on-line coupled with gas chromatography and flame ionization detection (HPLC-GC-FID) is a powerful tool for the quantitative determination, but it would often be desirable to obtain more information about the type of hydrocarbons in order to identify the source of the contamination and specify pertinent legislation. Comprehensive two-dimensional gas chromatography (GC×GC) is shown to produce plots distinguishing mineral oil saturated hydrocarbons (MOSH) from polymer oligomeric saturated hydrocarbons (POSH) and characterizing the degree of raffination of a mineral oil. The first dimension separation occurred on a phenyl methyl polysiloxane, the second on a dimethyl polysiloxane. Mass spectrometry (MS) was used for identification, FID for quantitative determination. This shows the substantial advances in chromatography to characterize complex hydrocarbon mixtures even as contaminants in food.

  6. Why double-stranded RNA resists condensation

    Energy Technology Data Exchange (ETDEWEB)

    Tolokh, Igor S.; Pabit, Suzette; Katz, Andrea M.; Chen, Yujie; Drozdetski, Aleksander; Baker, Nathan A.; Pollack, Lois; Onufriev, Alexey

    2014-09-15

    The addition of small amounts of multivalent cations to solutions containing double-stranded DNA leads to attraction between the negatively charged helices and eventually to condensation. Surprisingly, this effect is suppressed in double-stranded RNA, which carries the same charge as the DNA, but assumes a different double helical form. However, additional characterization of short (25 base-pairs) nucleic acid (NA) duplex structures by circular dichroism shows that measured differences in condensation are not solely determined by duplex helical geometry. Here we combine experiment, theory, and atomistic simulations to propose a mechanism that connects the observed variations in condensation of short NA duplexes with the spatial variation of cobalt hexammine (CoHex) binding at the NA duplex surface. The atomistic picture that emerged showed that CoHex distributions around the NA reveals two major NA-CoHex binding modes -- internal and external -- distinguished by the proximity of bound CoHex to the helical axis. Decreasing trends in experimentally observed condensation propensity of the four studied NA duplexes (from B-like form of homopolymeric DNA, to mixed sequence DNA, to DNA:RNA hybrid, to A-like RNA) are explained by the progressive decrease of a single quantity: the fraction of CoHex ions in the external binding mode. Thus, while NA condensation depends on a complex interplay between various structural and sequence features, our coupled experimental and theoretical results suggest a new model in which a single parameter connects the NA condensation propensity with geometry and sequence dependence of CoHex binding.

  7. Temporal dynamics of Bose-condensed gases

    Energy Technology Data Exchange (ETDEWEB)

    Trujillo Martinez, Mauricio

    2014-03-19

    We perform a detailed quantum dynamical study of non-equilibrium trapped, interacting Bose-condensed gases. We investigate Josephson oscillations between interacting Bose-Einstein condensates confined in a finite size double-well trap and the non-trivial time evolution of a coherent state placed at the center of a two dimensional optical lattice. For the Josephson oscillations three time scales appear. We find that Josephson junction can sustain multiple undamped oscillations up to a characteristic time scale τ{sub c} without exciting atoms out of the condensates. Beyond the characteristic time scale τ{sub c} the dynamics of the junction are governed by fast, non-condensed particles assisted Josephson tunnelling as well as the collisions between non-condensed particles. In the non-condensed particles dominated regime we observe strong damping of the oscillations due to inelastic collisions, equilibrating the system leading to an effective loss of details of the initial conditions. In addition, we predict that an initially self-trapped BEC state will be destroyed by these fast dynamics. The time evolution of a coherent state released at the center of a two dimensional optical lattice shows a ballistic expansion with a decreasing expansion velocity for increasing two-body interactions strength and particle number. Additionally, we predict that if the two-body interactions strength exceeds a certain value, a forerunner splits up from the expanding coherent state. We also observe that this system, which is prepared far from equilibrium, can evolve to a quasistationary non-equilibrium state.

  8. Deep desulfurization of hydrocarbon fuels

    Science.gov (United States)

    Song, Chunshan [State College, PA; Ma, Xiaoliang [State College, PA; Sprague, Michael J [Calgary, CA; Subramani, Velu [State College, PA

    2012-04-17

    The invention relates to processes for reducing the sulfur content in hydrocarbon fuels such as gasoline, diesel fuel and jet fuel. The invention provides a method and materials for producing ultra low sulfur content transportation fuels for motor vehicles as well as for applications such as fuel cells. The materials and method of the invention may be used at ambient or elevated temperatures and at ambient or elevated pressures without the need for hydrogen.

  9. Fictional Separation Logic

    DEFF Research Database (Denmark)

    Jensen, Jonas Buhrkal; Birkedal, Lars

    2012-01-01

    , separation means physical separation. In this paper, we introduce \\emph{fictional separation logic}, which includes more general forms of fictional separating conjunctions P * Q, where "*" does not require physical separation, but may also be used in situations where the memory resources described by P and Q...

  10. Assessing Energy Efficiency of Compression Heat Pumps in Drying Processes when Zeotropic Hydrocarbon Mixtures are Used as Working Agents

    Directory of Open Access Journals (Sweden)

    Shurayts Alexander

    2016-01-01

    Full Text Available Presents the results of studies of innovative materials in the field of renewable energy.The paper proposes a design and a formula for assessing energy efficiency of the heat pump air dryer, which uses zeotropic hydrocarbon mixtures of saturated hydrocarbons as a working agent and applies the principle of a counter-current heat exchanger with a variable temperature of both the working and the drying agents. Energy efficiency of the heat pump is achieved by means of obtaining a greater part of heat from renewable energy sources, in this case by cooling the air and condensing the water vapors in the heat pump. A conducted analysis identified correlations in establishing the marginal real coefficient of performance of the compression heat pump dryer running on zeotropic hydrocarbon mixtures and operating a cycle with variable temperatures of both the working and the drying agent in the evaporator and the condenser of the heat pump. According to the established correlations, the marginal real coefficient of performance of the compression heat pump dryers running on zeotropic hydrocarbon mixtures of 40 mol% of R600a and 60 mol% of R601 is 1.92 times higher than that of the same dryers running on only R600 (n-butane.

  11. Renormalisation Group Flow and Kaon Condensation

    CERN Document Server

    Krippa, Boris

    2016-01-01

    Functional renormalisation group approach is applied to a system of kaons with finite chemical potential. A set of approximate flow equations for the effective couplings is derived and solved. At high scale the system is found to be at the normal phase whereas at some critical value of the running scale it undergoes the phase transition (PT) to the phase with a spontaneously broken symmetry with the kaon condensate as an order parameter. The value of the condensate turns out to be quite sensitive to the kaon-kaon scattering length.

  12. Bose-Einstein Condensation of Atomic Hydrogen

    CERN Document Server

    Kleppner, D; Killian, T C; Fried, D G; Willmann, L; Landhuis, D; Moss, S C; Kleppner, Daniel; Greytak, Thomas J.; Killian, Thomas C.; Fried, Dale G.; Willmann, Lorenz; Landhuis, David; Moss, Stephen C.

    1998-01-01

    We have observed Bose-Einstein condensation (BEC) of trapped atomic hydrogen, and studied it by two-photon spectroscopy of the 1S-2S transition. In these lecture notes we briefly review the history of spin-polarized atomic hydrogen and describe the final steps to BEC. Laser spectroscopy, which probes the difference in mean field energy of the 1S and 2S states, is used to study the condensate, which has a peak density of 4.8e15 cm^-3 and population of 10^9.

  13. Turbulent meson condensation in quark deconfinement

    Directory of Open Access Journals (Sweden)

    Koji Hashimoto

    2015-06-01

    Full Text Available In a QCD-like strongly coupled gauge theory at large Nc, using the AdS/CFT correspondence, we find that heavy quark deconfinement is accompanied by a coherent condensation of higher meson resonances. This is revealed in non-equilibrium deconfinement transitions triggered by static, as well as quenched electric fields even below the Schwinger limit. There, we observe a “turbulent” energy flow to higher meson modes, which finally results in the quark deconfinement. Our observation is consistent with seeing deconfinement as a condensation of long QCD strings.

  14. Effects of oxaliplatin on DNA condensation

    Institute of Scientific and Technical Information of China (English)

    JU HaiPeng; ZHANG HongYan; LI Wei; WANG PengYe

    2014-01-01

    In this paper the interactions between DNA and anti-cancer drug oxaliplatin were investigated by using magnetic tweezers.The dynamics of DNA condensation due to oxaliplatin was traced under various forces.It is found that torsion constraint in DNA enhances the ability of oxaliplatin for shortening DNA.The transplatin helps oxaliplatin combine to DNA and increase the rate of DNA condensation.All these results are consistent to the previously proposed model and are helpful for further investigation of interaction between DNA and oxaliplatin.

  15. Geometric approach to condensates in holographic QCD

    CERN Document Server

    Hirn, J; Sanz, V; Hirn, Johannes; Rius, Nuria; Sanz, Veronica

    2006-01-01

    An SU(Nf)xSU(Nf) Yang-Mills theory on an extra-dimensional interval is considered, with appropriate symmetry-breaking boundary conditions on the IR brane. UV-brane to UV-brane correlators at high energies are compared with the OPE of two-point functions of QCD quark currents. Condensates correspond to departure from AdS of the (different) metrics felt by vector and axial combinations, away from the UV brane. Their effect on hadronic observables is studied: the extracted condensates agree with the signs and orders of magnitude expected from QCD.

  16. Colored condensates deep inside neutron stars

    CERN Document Server

    Blaschke, David

    2014-01-01

    It is demonstrated how in the absence of solutions for QCD under conditions deep inside compact stars an equation of state can be obtained within a model that is built on the basic symmetries of the QCD Lagrangian, in particular chiral symmetry and color symmetry. While in the vacuum the chiral symmetry is spontaneously broken, it gets restored at high densities. Color symmetry, however, gets broken simultaneously by the formation of colorful diquark condensates. It is shown that a strong diquark condensate in cold dense quark matter is essential for supporting the possibility that such states could exist in the recently observed pulsars with masses of 2 $M_\\odot$.

  17. Composition of gases vented from a condenser

    Energy Technology Data Exchange (ETDEWEB)

    Lyon, R.N.

    1980-08-01

    Designers of systems that involve condensers often need to predict the amount of process vapor that accompanies the noncondensable gases that are vented from the condensers. An approximation is given that appears to provide, in many cases, reasonably accurate values for the mole ratio of process vapor to noncondensable gases in the vented mixture. The approximation is particularly applicable to flash and direct-contact power systems for geothermal brines and ocean thermal energy conversion (OTEC). More regorous relationships are available for exceptional cases.

  18. Chiral Lagrangians and quark condensate in nuclei

    Energy Technology Data Exchange (ETDEWEB)

    Delorme, J.; Chanfray, G.; Ericson, M.

    1996-03-01

    The evolution of density of quark condensate in nuclear medium with interacting nucleons, including the short range correlations is examined. Two chiral models are used, the linear sigma model and the non-linear one. It is shown that the quark condensate, as other observables, is independent on the variant selected. The application to physical pions excludes the linear sigma model as a credible one. The non-linear models restricted to pure s-wave pion-nucleon scattering are examined. (author). 28 refs.; Submitted to nuclear Physics, A (NL).

  19. Evolution of the Interference of Bose Condensates Released from a Double-Well Potential

    Institute of Scientific and Technical Information of China (English)

    ZHU Bi-Hui; LIU Shu-Juan; XIONG Hong-Wei

    2011-01-01

    @@ The interference pattern of two Bose-Einstein condensates released from a double-well potential for different holding times is theoretically investigated using a decoupled two-mode Bose-Hubbard model.For two coherently separated condensates,the interference displays a periodic behavior,which is closely related to the atomic inter-action.A remarkable parity effect is found in the interference patterns.For certain holding times,the even/odd total number of atoms would result in different interference fringes.The influences of different initial conditions on the evolution of interference and the observation of parity effects are discussed.%The interference pattern of two Bose-Einstein condensates released from a double-well potential for different holding times is theoretically investigated using a decoupled two-mode Bose-Hubbard model. For two coherently separated condensates, the interference displays a periodic behavior, which is closely related to the atomic interaction. A remarkable parity effect is found in the interference patterns. For certain holding times, the even/odd total number of atoms would result in different interference fringes. The influences of different initial conditions on the evolution of interference and the observation of parity effects are discussed.

  20. Vapor Compression and Thermoelectric Heat Pump Heat Exchangers for a Condensate Distillation System: Design and Experiment

    Science.gov (United States)

    Erickson, Lisa R.; Ungar, Eugene K.

    2013-01-01

    Maximizing the reuse of wastewater while minimizing the use of consumables is critical in long duration space exploration. One of the more promising methods of reclaiming urine is the distillation/condensation process used in the cascade distillation system (CDS). This system accepts a mixture of urine and toxic stabilizing agents, heats it to vaporize the water and condenses and cools the resulting water vapor. The CDS wastewater flow requires heating and its condensate flow requires cooling. Performing the heating and cooling processes separately requires two separate units, each of which would require large amounts of electrical power. By heating the wastewater and cooling the condensate in a single heat pump unit, mass, volume, and power efficiencies can be obtained. The present work describes and compares two competing heat pump methodologies that meet the needs of the CDS: 1) a series of mini compressor vapor compression cycles and 2) a thermoelectric heat exchanger. In the paper, the system level requirements are outlined, the designs of the two heat pumps are described in detail, and the results of heat pump performance tests are provided. A summary is provided of the heat pump mass, volume and power trades and a selection recommendation is made.

  1. Hydrocarbon prospectivity in Western Greece

    Energy Technology Data Exchange (ETDEWEB)

    Maravelis, Angelos; Makrodimitras, George; Zelilidis, Avraam [Patras Univ. (Greece). Lab. of Sedimentology

    2012-06-15

    The geology of Western Greece is dominated by the most external zones of the Hellenide fold-and-thrust belt, namely the Pre-Apulian (or Paxoi) and Ionian zones. With Western Greece and Albania having undergone, in broad terms, similar geological histories, also the hydrocarbon potentials of both areas may be compared. Likewise, the hydrocarbon potential of Italy's Apulian Platform, adjoining in the westerly offshore, may serve as an analogue. Three basin types within Western Greece that deserve hydrocarbon exploration have been examined and are grouped, correlated to major tectonic features, namely foreland (Ionian thrusts' foreland basin), piggy-back (Ionian thrusts' back-arc basin) and strike-slip basins. Additionally, strike-slip basins are further subdivided into the basin north of the Borsh-Khardhiqit strike-slip fault and the Preveza basin, north of Cephalonia transfer fault. Their filling histories suggest the occurrence of Mesozoic carbonate plays and Oligocene/Miocene sandstone plays both for oil and gas.

  2. Abnormal pressure in hydrocarbon environments

    Science.gov (United States)

    Law, B.E.; Spencer, C.W.

    1998-01-01

    Abnormal pressures, pressures above or below hydrostatic pressures, occur on all continents in a wide range of geological conditions. According to a survey of published literature on abnormal pressures, compaction disequilibrium and hydrocarbon generation are the two most commonly cited causes of abnormally high pressure in petroleum provinces. In young (Tertiary) deltaic sequences, compaction disequilibrium is the dominant cause of abnormal pressure. In older (pre-Tertiary) lithified rocks, hydrocarbon generation, aquathermal expansion, and tectonics are most often cited as the causes of abnormal pressure. The association of abnormal pressures with hydrocarbon accumulations is statistically significant. Within abnormally pressured reservoirs, empirical evidence indicates that the bulk of economically recoverable oil and gas occurs in reservoirs with pressure gradients less than 0.75 psi/ft (17.4 kPa/m) and there is very little production potential from reservoirs that exceed 0.85 psi/ft (19.6 kPa/m). Abnormally pressured rocks are also commonly associated with unconventional gas accumulations where the pressuring phase is gas of either a thermal or microbial origin. In underpressured, thermally mature rocks, the affected reservoirs have most often experienced a significant cooling history and probably evolved from an originally overpressured system.

  3. Influence of condensation temperature on selected exhaled breath parameters

    Directory of Open Access Journals (Sweden)

    Manini Paola

    2005-09-01

    Full Text Available Abstract Background The effects of changes in cooling temperature on biomarker levels in exhaled breath condensate have been little investigated. The aim of the study was to test the effect of condensation temperature on the parameters of exhaled breath condensate and the levels of selected biomarkers. Methods Exhaled breath condensate was collected from 24 healthy subjects at temperatures of -10, -5, 0 and +5 C degrees. Selected parameters (condensed volume and conductivity and biomarkers (hydrogen peroxide, malondialdehyde were measured. Results There was a progressive increase in hydrogen peroxide and malondialdehyde concentrations, and condensate conductivity as the cooling temperature increased; total condensate volume increased as the cooling temperature decreased. Conclusion The cooling temperature of exhaled breath condensate collection influenced selected biomarkers and potential normalizing factors (particularly conductivity in different ways ex vivo. The temperature of exhaled breath condensate collection should be controlled and reported.

  4. Advanced treatment of flue gas condensate; Avancerad rening av roekgaskondensat

    Energy Technology Data Exchange (ETDEWEB)

    Axby, Fredrik [Carl Bro Energikonsult AB, Malmoe (Sweden); Ekengren, Oesten; Bjurhem, Jan Erik [IVL Swedish Environmental Research Inst. (Sweden)

    2004-11-01

    The aim of the project is to study different techniques to recover water to the process and to reduce emission of ammonia to water and air. Membrane technology (ultra- (UF) and nanofiltration (NF) and reverse osmosis (RO)) and a stripper have been studied for ammonia separation. The use of bio-fuel in energy production is increasing. The off-gases are often condensed to increase energy yield and to decrease emissions to air. Since the concentration of nitrogen (ammonium) is high in condensates from units with SNCR for NO{sub x}-reduction (selective non-catalytic reduction) this water has to be treated further. Another aim of the project is to replace a great part of the tap water used in the process. This can be accomplished with membrane technology. Laboratory tests revealed a certain degree of membrane fouling. However, both NF and RO worked well in the full-scale unit, in spite of problems in the condensate treatment that resulted in tar products in the water. There was no obvious negative effect on these membranes. Analyses of PAH have shown a low base concentration that may lead to fouling after a long time. UF removes most of these PAH and thus protects the following NF- or RO-membranes. NF gave about 3 times higher filtration capacity (flux) than RO for the condensate at 30 bars. This can save a lot of money, since the membrane area can be reduced to a third. High temperature also increases the flux. The results are of high interest but ought to be certified during long run tests. Fouling was low in both NF and RO, and initial flux was retained after cleaning. The reason is probably the good pre-treatment (UF). The concentration could proceed very far, which make it possibly to reuse the concentrate to the system. Simulations of an ammonia stripper showed some parameters to be critical in certain ranges, while others didn't affect the result. Airflow is a critical parameter during stable conditions within the design data. Simulated data were verified

  5. Josephson effects in a Bose–Einstein condensate of magnons

    Energy Technology Data Exchange (ETDEWEB)

    Troncoso, Roberto E., E-mail: r.troncoso.c@gmail.com [Centro para el Desarrollo de la Nanociencia y la Nanotecnología, CEDENNA, Avda. Ecuador 3493, Santiago 9170124 (Chile); Departamento de Física, Facultad de Ciencias Físicas y Matemáticas, Universidad de Chile, Casilla 487-3, Santiago (Chile); Núñez, Álvaro S., E-mail: alnunez@dfi.uchile.cl [Departamento de Física, Facultad de Ciencias Físicas y Matemáticas, Universidad de Chile, Casilla 487-3, Santiago (Chile)

    2014-07-15

    A phenomenological theory is developed, that accounts for the collective dynamics of a Bose–Einstein condensate of magnons. In terms of such description we discuss the nature of spontaneous macroscopic interference between magnon clouds, highlighting the close relation between such effects and the well known Josephson effects. Using those ideas, we present a detailed calculation of the Josephson oscillations between two magnon clouds, spatially separated in a magnonic Josephson junction. -- Highlights: •We presented a theory that accounts for the collective dynamics of a magnon-BEC. •We discuss the nature of macroscopic interference between magnon-BEC clouds. •We remarked the close relation between the above phenomena and Josephson’s effect. •We remark the distinctive oscillations that characterize the Josephson oscillations.

  6. Conventional and Unconventional Pairing and Condensates in Dilute Nuclear Matter

    CERN Document Server

    Clark, John W; Stein, Martin; Huang, Xu-Guang; Khodel, Victor A; Shaginyan, Vasily R; Zverev, Mikhail V

    2016-01-01

    This contribution will survey recent progress toward an understanding of diverse pairing phenomena in dilute nuclear matter at small and moderate isospin asymmetry, with results of potential relevance to supernova envelopes and proto-neutron stars. Application of {\\it ab initio} many-body techniques has revealed a rich array of temperature-density phase diagrams, indexed by isospin asymmetry, which feature both conventional and unconventional superfluid phases. At low density there exist a homogeneous translationally invariant BCS phase, a homogeneous LOFF phase violating translational invariance, and an inhomogeneous translationally invariant phase-separated BCS phase. The transition from the BCS to the BEC phases is characterized in terms of the evolution, from weak to strong coupling, of the pairing gap, condensate wave function, and quasiparticle occupation numbers and spectra. Additionally, a schematic formal analysis of pairing in neutron matter at low to moderate densities is presented that establishes...

  7. Retrofit with membrane the Paraffin/Olefin separation

    Energy Technology Data Exchange (ETDEWEB)

    Motelica, A.; Bruinsma, O.S.L.; Kreiter, R.; Den Exter, M.J.; Vente, J.F. [ECN Biomass and Energy Efficiency, Petten (Netherlands)

    2012-10-15

    Olefins, such as ethylene, propylene, and butadiene, are among the most produced intermediates in petrochemical industry. They are produced from a wide range of hydrocarbon feedstocks (ethane, propane, butane, naphtha, gas oil) via a cracking process. The last step in this process is the separation of olefins from other hydrocarbons, which is traditionally performed with distillation. As the physicochemical properties, such as volatility and boiling point, of the compounds are very similar, the purification becomes capital and energy intensive. For example, the top of an ethylene/ethane distillation column needs to be chilled to -30C and this requires large amount of electric energy consumption. The separation of butadiene from the C4-fraction is performed with the aid of an additional solvent. This solvent has to be regenerated at the cost of additional high temperature steam. To overcome these separation disadvantages of olefin/paraffin separation, different separation methods have been investigated and proposed in recent years. Suggested options are based on better heat integration of the overall process, or on novel separation systems such as Heat Integrated Distillation Columns, membrane separation, adsorption-desorption systems or on hybrid separation methods, for example, distillation combined with membrane separation.

  8. Separation Anxiety (For Parents)

    Science.gov (United States)

    ... Kids to Be Smart About Social Media Separation Anxiety KidsHealth > For Parents > Separation Anxiety Print A A ... both of you get through it. About Separation Anxiety Babies adapt pretty well to other caregivers. Parents ...

  9. Separation Anxiety (For Parents)

    Science.gov (United States)

    ... Feeding Your 1- to 2-Year-Old Separation Anxiety KidsHealth > For Parents > Separation Anxiety A A A ... both of you get through it. About Separation Anxiety Babies adapt pretty well to other caregivers. Parents ...

  10. Polycyclic aromatic hydrocarbons connected with Schiff base linkers: Experimental and theoretical photophysical characterization and electrochemical properties

    Science.gov (United States)

    Sęk, Danuta; Siwy, Mariola; Małecki, Jan Grzegorz; Kotowicz, Sonia; Golba, Sylwia; Nowak, Elżbieta M.; Sanetra, Jerzy; Schab-Balcerzak, Ewa

    2017-03-01

    A series of polyaromatic hydrocarbons with anthracene, phenanthrene and pyrene units connected with Schiff base junctions were synthesized via condensation of p-phenylenediamine and hydrazine with selected aldehydes. The effect of both hydrocarbon structures and presence of N-N- or phenyl- linked diimines on properties of the prepared azines and azomethines was analyzed. The obtained compounds were soluble in common organic solvents and melted in the range of 226-317 °C. Their photophysical and electrochemical properties were investigated by UV-vis, photoluminescence spectroscopies and cyclic voltammetry (CV), respectively. Moreover, a density functional theory (DFT) was applied for calculation of their electronic and geometric structures as well as absorption and emission spectra. Additionally, their electron acceptor activity was preliminary tested in photovoltaic experiment.

  11. Aromatic hydrocarbons associated with brines from geopressured wells. Annual report, fiscal 1985

    Energy Technology Data Exchange (ETDEWEB)

    Keeley, D.F.; Meriwether, J.R.

    1985-01-01

    Samples of cryocondensates - materials condensed at - 78.5/sup 0/C were taken on a regular basis from the gas stream for the USDOE geopressured wells. Most of the data has been taken from the Gladys McCall well as it has flowed on a regular and almost continous basis. The cryocondensates, not the ''condensate'' from gas wells, are almost exclusively aromatic hydrocarbons, primarily benzene, toluene, ethylbenzene, and the xylenes, but contain over 95 compounds, characterized using gas chromatographic-mass spectroscopy. The solubility in water and brine of benezene, toluene, ethylbenzene and o-xylene, some of the components of the cryocondensate, as well as distribution coefficients between water or brine and a standard oil have been measured. 25 refs.

  12. Effect of hydrocarbon to nuclear magnetic resonance (NMR) logging in tight sandstone reservoirs and method for hydrocarbon correction

    Science.gov (United States)

    Xiao, Liang; Mao, Zhi-qiang; Xie, Xiu-hong

    2017-04-01

    It is crucial to understand the behavior of the T2 distribution in the presence of hydrocarbon to properly interpret pore size distribution from NMR logging. The NMR T2 spectrum is associated with pore throat radius distribution under fully brine saturated. However, when the pore space occupied by hydrocarbon, the shape of NMR spectrum is changed due to the bulk relaxation of hydrocarbon. In this study, to understand the effect of hydrocarbon to NMR logging, the kerosene and transformer oil are used to simulate borehole crude oils with different viscosity. 20 core samples, which were separately drilled from conventional, medium porosity and permeability and tight sands are saturated with four conditions of irreducible water saturation, fully saturated with brine, hydrocarbon-bearing condition and residual oil saturation, and the corresponding NMR experiments are applied to acquire NMR measurements. The residual oil saturation is used to simulate field NMR logging due to the shallow investigation depth of NMR logging. The NMR spectra with these conditions are compared, the results illustrate that for core samples drilled from tight sandstone reservoirs, the shape of NMR spectra have much change once they pore space occupied by hydrocarbon. The T2 distributions are wide, and they are bimodal due to the effect of bulk relaxation of hydrocarbon, even though the NMR spectra are unimodal under fully brine saturated. The location of the first peaks are similar with those of the irreducible water, and the second peaks are close to the bulk relaxation of viscosity oils. While for core samples drilled from conventional formations, the shape of T2 spectra have little changes. The T2 distributions overlap with each other under these three conditions of fully brine saturated, hydrocarbon-bearing and residual oil. Hence, in tight sandstone reservoirs, the shape of NMR logging should be corrected. In this study, based on the lab experiments, seven T2 times of 1ms, 3ms, 10ms, 33ms

  13. Hydrocarbon Reserves: Abundance or Scarcity

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    IFP and the OAPEC jointly organize a regular international seminar dealing with world oil-related problems appearing in the news. For the first time, this seminar has been opened to oil and gas company specialists, service companies, research centers and independents. This year's theme concerns oil and gas reserves: are they abundant or are we headed towards the shortages announced by some experts? This theme is especially topical in that: oil and gas currently meet two thirds of world energy needs and almost completely dominate the transport sector; the reserves declared by the OAPEC countries account for nearly half of world reserves; the price of a barrel of oil went through the roof in 2004; world energy demand is growing fast and alternative sources of energy are far from ready to take over from oil and gas in the next few decades. Since the reserves correspond to the volume it is technically and economically viable to produce, the seminar has, of course, dealt with the technical and economic questions that arise in connection with exploration and production, but it has also considered changes in the geopolitical context. Presentations by the leading companies of the OAPEC countries and by the IFP group were completed by presentation from the International Energy Agency (IEA), the United States Geological Survey (USGS), the IHS Energy Group, Total and Gaz de France. This document gathers the transparencies of the following presentations: Hydrocarbon reserves in OAPEC members countries: current and future (M. Al-Lababidi); Non OAPEC liquid reserves and production forecasts (Y. Mathieu); World oil and gas resources and production outlook (K. Chew); Global investments in the upstream (F. Birol); Total's policy in the oil and gas sector (C. de Margerie); Gaz de France's policy in the oil and gas sector (J. Abiteboul); NOC/IOC's opportunities in OPEC countries (I. Sandrea); Relationships between companies, countries and investors: How they may

  14. Enhancing Condensers for Geothermal Systems: the Effect of High Contact Angles on Dropwise Condensation Heat Transfer

    Energy Technology Data Exchange (ETDEWEB)

    Kennedy, John M.; Kim, Sunwoo; Kim, Kwang J.

    2009-10-06

    Phase change heat transfer is notorious for increasing the irreversibility of, and therefore decreasing the efficiency of, geothermal power plants. Its significant contribution to the overall irreversibility of the plant makes it the most important source of inefficiency in the process. Recent studies here have shown the promotion of drop wise condensation in the lab by means of increasing the surface energy density of a tube with nanotechnology. The use of nanotechnology has allowed the creation of surface treatments which discourage water from wetting a tube surface during a static test. These surface treatments are unique in that they create high- contact angles on the condensing tube surfaces to promote drop wise condensation.

  15. Condensation heat transfer on two-tier superhydrophobic surfaces

    Science.gov (United States)

    Cheng, Jiangtao; Vandadi, Aref; Chen, Chung-Lung

    2012-09-01

    We investigated water vapor condensation on a two-tier superhydrophobic surface in an environmental scanning electron microscope (ESEM) and in a customer-designed vapor chamber. We have observed continuous dropwise condensation (DWC) on the textured surface in ESEM. However, a film layer of condensate was formed on the multiscale texture in the vapor chamber. Due to the filmwise condensation, the condensation heat transfer coefficient of the superhydrophobic surface is lower than that of a flat hydrophobic surface especially under high heat flux situations. Our studies indicate that adaptive and prompt condensate droplet purging is the dominant factor for sustaining long-term DWC.

  16. Reduction of oil in sludges from light petroleum separators

    Energy Technology Data Exchange (ETDEWEB)

    Gallenkemper, B. (Fachhochschule Muenster (DE)); Voss, U. (Oswald Schulze GmbH and Co., Gladback (DE))

    1991-08-01

    A flotation treatment for reducing the oil content of sludges accumulated in light petroleum separators and grit traps is described. Hydrocarbon content of the sludge can be reduced to less than 3% of the dry solids by air flotation assisted by appropriate surfactants. There is a corresponding reduction in Polychlorinated Biphenyls (PCBs) and Polyaromatic Hydrocarbons (PAHs). Air escaping from the flotation cells is scrubbed in a bio-filter and water is purified by activated sludge or a further flotation method. Recovered oil can be further dewatered to produce a useful fuel. (author).

  17. Cuticular hydrocarbon profiles differentiate tropical fire ant populations (Solenopsis geminata, Hymenoptera: Formicidae)

    Science.gov (United States)

    The cuticular hydrocarbons (CHCs) from hexane rinses of workers from two Florida populations (dark and red forms) of the tropical fire ant, Solenopsis geminata, were separated by silica gel chromatography and identified by GC-MS analysis. Both the dark form and the red form produce similar CHCs with...

  18. Aromatic hydrocarbons associated with brines from geopressured wells. Annual report, [December 28, 1990--December 16, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-09-01

    The various operational wells were sampled on a monthly basis for the yield of the cryocondensate hydrocarbons. The total cryocondensate concentration as well as the concentrations in the brine and the gas after passing the separator system are summarized. The total cryocondensate yield is displayed.

  19. Effects of water matrix on virus inactivation using common virucidal techniques for condensate urine disinfection.

    Science.gov (United States)

    Zuo, Xiaojun; Chu, Xiaona; Hu, Jiangyong

    2015-10-01

    Three common virucidal techniques (chlorine, UV and UV/TiO2) were applied to inactivate virus (MS2 and Phi X174) in condensate water after the evaporation of source-separated urine for reclaimed water. The inactivation efficiencies were compared with the results of previous studies, with the emphasis on the analysis of water matrix effects. Results showed that all virus inactivation in condensate water were lower than the control (in sterilized DI water). As for UV/TiO2 disinfection, both nitrate and ammonia nitrogen could promote slightly viral inactivation, while the inhibition by urea was dominant. Similarly, ammonia nitrogen had greater impacts on chlorine disinfection than urea and nitrate. In contrast, all water matrices (urea, nitrate and ammonia nitrogen) had little influence on UV disinfection. Based on the findings in this study, UV disinfection could be recommended for disinfecting the reclaimed water from the evaporation of source-separated urine. Copyright © 2015. Published by Elsevier Ltd.

  20. Eulerian and modified Lagrangian approaches to multi-dimensional condensation and coagulation

    CERN Document Server

    Li, Xiang-Yu; Haugen, N E L; Svensson, G

    2016-01-01

    Turbulence is believed to play a crucial role in cloud droplet growth. It makes the collision process of inertial particles strongly nonlinear, which motivates the study of two rather different numerical schemes. Here, an Eulerian scheme based on the Smoluchowski equation is compared with two Lagrangian superparticle (or superdroplet) schemes in the presence of condensation and coagulation. The growth processes are studied either separately or in combination using either two-dimensional turbulence, a steady flow, or just gravitational acceleration without gas flow. Discrepancies between different schemes are most strongly exposed when condensation and coagulation are studied separately, while their combined effects tend to result in smaller discrepancies. In the Eulerian approach, the late growth of the mean particle radius slows down for finer mass bins, especially for collisions caused by different particle sizes. In the Lagrangian approach it is nearly independent of grid resolution at early times and weak...